Understanding augmented reality concepts and applications

CERN Document Server

Craig, Alan B

2013-01-01

Augmented reality is not a technology. Augmented reality is a medium. Likewise, a book on augmented reality that only addresses the technology that is required to support the medium of augmented reality falls far short of providing the background that is needed to produce, or critically consume augmented reality applications. One reads a book. One watches a movie. One experiences augmented reality. Understanding Augmented Reality addresses the elements that are required to create compelling augmented reality experiences. The technology that supports

A high concentration of recombinant human bone morphogenetic protein-2 induces low-efficacy bone regeneration in sinus augmentation: a histomorphometric analysis in rabbits.

Science.gov (United States)

Hong, Ji-Youn; Kim, Min-Soo; Lim, Hyun-Chang; Lee, Jung-Seok; Choi, Seong-Ho; Jung, Ui-Won

2016-12-01

The aim of the study was to elucidate the efficacy of bone regeneration at the early stage of healing in rabbit sinuses grafted with a biphasic calcium phosphate (BCP) carrier soaked in a high concentration of recombinant human bone morphogenetic protein-2 (rhBMP-2). Both maxillary sinuses of eight male rabbits were used. The sinus on one side (assigned randomly) was grafted with BCP loaded with rhBMP-2 (1.5 mg/ml; test group) using a soaking method, while the other was grafted with saline-soaked BCP (control group). After a 2-week healing period, the sinuses were analyzed by micro-computed tomography and histomorphometry. The total augmented area and soft tissue space were significantly larger in the test group than in the control group, whereas the opposite was true for the area of residual material and newly formed bone. Most of the new bone in the test group was localized to the Schneiderian membrane (SM), while very little bone formation was observed in the window and center regions of the sinus. New bone was distributed evenly in the control group sinuses. Within the limitations of this study, it appeared that application of a high concentration of rhBMP-2 soaked onto a BCP carrier inhibited bone regeneration from the pristine bone and increased soft tissue swelling and inflammatory response at the early healing stage of sinus augmentation, although osteoinductive potential was found along the SM. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Jointly Optimize Data Augmentation and Network Training: Adversarial Data Augmentation in Human Pose Estimation

OpenAIRE

Peng, Xi; Tang, Zhiqiang; Yang, Fei; Feris, Rogerio; Metaxas, Dimitris

2018-01-01

Random data augmentation is a critical technique to avoid overfitting in training deep neural network models. However, data augmentation and network training are usually treated as two isolated processes, limiting the effectiveness of network training. Why not jointly optimize the two? We propose adversarial data augmentation to address this limitation. The main idea is to design an augmentation network (generator) that competes against a target network (discriminator) by generating `hard' au...

Augmentation of chain formation in a magnetic fluid by the addition of halloysite nanotubes

International Nuclear Information System (INIS)

Desai, Rucha; Upadhyay, R V; Mehta, R V

2014-01-01

The study aims to investigate the effect of the addition of nanotubes of halloysite on the augmentation of chains observed in an aqueous magnetic fluid consisting of co-precipitated magnetite particles stabilized with lauric acid. Three samples of the mixture containing 0.5%, 1% and 2% of halloysite nanotubes (HNTs) and a pure magnetic fluid are used for this study. A room temperature magnetization study shows that for 0.5% and 1% of HNT, the magnetization of the mixture significantly increases, while for the higher concentration (2%) it decreases. Such concentration dependent behaviour on the addition of a nonmagnetic system to a magnetic fluid has not previously been observed. The increase in the magnetization is attributed to smaller sized (<5–6 nm) magnetite attached to the HNT, forming a magnetite–HNT composite. Additionally, field-induced chaining is augmented by the addition of HNT in the magnetic fluid. The augmentation of chain formation is confirmed by optical microscopy, field-induced transmission changes and field-dependent diffraction effects. The augmentation will be useful in enhancing other properties of the composite, such as the viscosity and thermal conductivity of nanofluids. (paper)

Confronting an augmented reality

Directory of Open Access Journals (Sweden)

John Hedberg

2012-08-01

Full Text Available How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself? In this article, we seek to initiate a discussion that focuses on these questions, and suggest that they be used as drivers for research into effective educational applications of augmented reality. We discuss how multi-modal, sensorial augmentation of reality links to existing theories of education and learning, focusing on ideas of cognitive dissonance and the confrontation of new realities implied by exposure to new and varied perspectives. We also discuss connections with broader debates brought on by the social and cultural changes wrought by the increased digitalisation of our lives, especially the concept of the extended mind. Rather than offer a prescription for augmentation, our intention is to throw open debate and to provoke deep thinking about what interacting with and creating an augmented reality might mean for both teacher and learner.

Vitreous humor and albumin augment the proliferation of cultured retinal precursor cells

DEFF Research Database (Denmark)

Yang, Jing; Klassen, Henry; Pries, Mette

2008-01-01

concentrations of vitreous fluid supplementation was quantified by using a (3)H-thymidine incorporation assay. Active components of vitreous fluid were partially characterized by gel filtration chromatography (GFC) and UV spectral analysis. The effect of each vitreous fraction on proliferation was determined...... Da, consistent with ascorbic acid. Ascorbic acid was confirmed in vitreous fluid by UV spectral analysis. Growth-augmenting activity was present in higher molecular mass vitreous fractions, consistent with protein components. Albumin, the major protein in vitreous fluid, was found to augment...... proliferation. Because vitreous-associated augmentation of retinal precursor proliferation remains an epidermal growth factor-dependent phenomenon, the proliferative status of transplanted cells in the vitreous cavity is likely determined by a combination of factors. (c) 2008 Wiley-Liss, Inc....

Mobile Augmented Reality Applications

OpenAIRE

Prochazka, David; Stencl, Michael; Popelka, Ondrej; Stastny, Jiri

2011-01-01

Augmented reality have undergone considerable improvement in past years. Many special techniques and hardware devices were developed, but the crucial breakthrough came with the spread of intelligent mobile phones. This enabled mass spread of augmented reality applications. However mobile devices have limited hardware capabilities, which narrows down the methods usable for scene analysis. In this article we propose an augmented reality application which is using cloud computing to enable using...

Augmenting Clozapine With Sertindole

DEFF Research Database (Denmark)

Nielsen, Jimmi; Emborg, Charlotte; Gydesen, Susanne

2012-01-01

Clozapine augmentation with antipsychotic drugs is widely used despite sparse evidence supporting this strategy. Sertindole is a nonsedating atypical antipsychotic drug with low affinity for cholinergic receptors, which makes it potentially suitable for augmentation of clozapine. The study design...... glucose, lipids, and electrocardiogram. Clozapine augmentation with sertindole was not superior to placebo regarding total score or subscale score of the Positive and Negative Syndrome Scale, Clinical Global Impression, World Health Organization Quality of Life Brief, or Drug Attitude Inventory....... No increased adverse effects compared with placebo were found. Four patients randomized to sertindole experienced a significant worsening of psychosis, and 2 of them required psychiatric admission. Metabolic parameters were unchanged during the study, but augmentation of clozapine with sertindole...

[Augmentation technique on the proximal humerus].

Science.gov (United States)

Scola, A; Gebhard, F; Röderer, G

2015-09-01

The treatment of osteoporotic fractures is still a challenge. The advantages of augmentation with respect to primary in vitro stability and the clinical use for the proximal humerus are presented in this article. In this study six paired human humeri were randomized into an augmented and a non-augmented group. Osteosynthesis was performed with a PHILOS plate (Synthes®). In the augmented group the two screws finding purchase in the weakest cancellous bone were augmented. The specimens were tested in a 3-part fracture model in a varus bending test. The augmented PHILOS plates withstood significantly more load cycles until failure. The correlation to bone mineral density (BMD) showed that augmentation could partially compensate for low BMD. The augmentation of the screws in locked plating in a proximal humerus fracture model is effective in improving the primary stability in a cyclic varus bending test. The targeted augmentation of two particular screws in a region of low bone quality within the humeral head was almost as effective as four screws with twice the amount of bone cement. Screw augmentation combined with a knowledge of the local bone quality could be more effective in enhancing the primary stability of a proximal humerus locking plate because the effect of augmentation can be exploited more effectively limiting it to the degree required. The technique of augmentation is simple and can be applied in open and minimally invasive procedures. When the correct procedure is used, complications (cement leakage into the joint) can be avoided.

Augmented reality and ubiquitous computing : The hidden potentialities of augmented reality

NARCIS (Netherlands)

Liberati, Nicola

2016-01-01

The aim of this paper was to highlight the augmented reality’s potentialities, depicting its main characteristics and focusing attention on what its goal should be in order to have a new technology completely different from those that already exist. From a technological point of view, augmented

Capillary Refill using Augmented Reality

OpenAIRE

Clausen, Christoffer

2017-01-01

Master's thesis in Computer science The opportunities within augmented reality is growing. Augmented reality is a combination of the real and the virtual world in real time, and large companies like Microsoft and Google is now investing heavily in the technology. This thesis presents a solution for simulating a medical test called capillary refill, by using augmented reality. The simulation is performed with an augmented reality headset called HoloLens. The HoloLens will recognise a mark...

Augmented Mirror: Interactive Augmented Reality System Based on Kinect

OpenAIRE

Vera , Lucía; Gimeno , Jesús; Coma , Inmaculada; Fernández , Marcos

2011-01-01

Part 1: Long and Short Papers; International audience; In this paper we present a virtual character controlled by an actor in real time, who talks with an audience through an augmented mirror. The application, which integrates video images, the avatar and other virtual objects within an Augmented Reality system, has been implemented using a mixture of technologies: two kinect systems for motion capture, depth map and real images, a gyroscope to detect head movements, and control algorithms to...

Comparison of the hydrogeology and water quality of a ground-water augmented lake with two non-augmented lakes in northwest Hillsborough County, Florida

Science.gov (United States)

Metz, Patricia A.; Sacks, Laura A.

2002-01-01

lakes, which is additional evidence of the limited confinement at Round Lake. A comparison of the water quality and lake-bottom sediments at the three lakes indicate that Round Lake is strongly influenced by the addition of large quantities of calcium-bicarbonate enriched augmentation water. Round Lake had higher alkalinity, pH, calcium and dissolved oxygen concentrations, specific conductance, and water clarity than the two non-augmented lakes. Round Lake was generally saturated to supersaturated with respect to calcite, but was undersaturated when augmentation was low and after high rainfall periods. Calcium carbonate has accumulated in the lake sediments from calcite precipitation, from macrophytes such as Nitella sp., and from the deposition of carbonate-rich mollusk shells, such as Planerbella sp., both of which thrive in the high alkalinity lake water. Lake-bottom sediments and aquatic biota at Round Lake had some of the highest radium-226 activity levels measured in a Florida lake. The high radium-226 levels (27 disintegrations per minute per dry mass) can be atrributed to augmenting the lake with ground water from the Upper Floridan aquifer. Although the ground water has relatively low levels of radium-226 (5.8 disintegrations per minute per liter), the large volumes of ground water added to the lake for more than 30 years have caused radium-226 to accumulate in the sediments and lake biota.The Round Lake basin had higher calcium and bicarbonate concentrations in the surficial aquifer than at the non-augmented lakes, which indicates the lateral leakage of calcium-bicarbonate enriched lake water into the surficial aquifer. Deuterium and oxygen-18 data indicated that water in well nests near the lake consists of as much as 100 percent lake leakage, and water from the augmentation well had a high percentage of recirculated lake water (between 59 and 73 percent lake leakage). The ground water surrounding Round Lake was undersaturated with respect to calcite

Augmented reality in neurosurgery.

Science.gov (United States)

Tagaytayan, Raniel; Kelemen, Arpad; Sik-Lanyi, Cecilia

2018-04-01

Neurosurgery is a medical specialty that relies heavily on imaging. The use of computed tomography and magnetic resonance images during preoperative planning and intraoperative surgical navigation is vital to the success of the surgery and positive patient outcome. Augmented reality application in neurosurgery has the potential to revolutionize and change the way neurosurgeons plan and perform surgical procedures in the future. Augmented reality technology is currently commercially available for neurosurgery for simulation and training. However, the use of augmented reality in the clinical setting is still in its infancy. Researchers are now testing augmented reality system prototypes to determine and address the barriers and limitations of the technology before it can be widely accepted and used in the clinical setting.

AR DOC: Augmented reality documentaries

DEFF Research Database (Denmark)

Vistisen, Peter

2014-01-01

Augmented Reality Documentaries (AR DOC) er et ’lille’ Shareplay projekt (ansøgte midler augmented reality cross media løsninger, til at skabe engagerende publikumsformidling...... indenfor oplevelsesindustrien. Projektet har genereret ny viden omkring, hvordan fysisk og digital formidling kan understøttes via Augmented Reality som formidlingsformat....

Crime Scenes as Augmented Reality

DEFF Research Database (Denmark)

Sandvik, Kjetil

2010-01-01

Using the concept of augmented reality, this article will investigate how places in various ways have become augmented by means of different mediatization strategies. Augmentation of reality implies an enhancement of the places' emotional character: a certain mood, atmosphere or narrative surplus......, physical damage: they are all readable and interpretable signs. As augmented reality the crime scene carries a narrative which at first is hidden and must be revealed. Due to the process of investigation and the detective's ability to reason and deduce, the crime scene as place is reconstructed as virtual...

Low serum uric acid concentration augments insulin effects on the prevalence of metabolic syndrome.

Science.gov (United States)

Porchia, Leonardo M; Gonzalez-Mejia, M Elba; Torres-Rasgado, Enrique; Ruiz-Vivanco, Guadalupe; Pérez-Fuentes, Ricardo

2018-05-01

Insulin and uric acid were shown affect the prevalence of Metabolic Syndrome (MetS), but no studies examine their interaction. Therefore, we conducted this study to determine their biological interaction in subjects from central Mexico. 433 subjects were enrolled for a cross-sectional study. MetS was defined according to the Harmonizing Definition. Hyperuricemia was defined as ≥7.0 mg/dL in males and ≥5.8 mg/dL in females. Hyperinsulinemia was defined as ≥11.0 μU/mL. Pearson correlation coefficient (r) was calculated to determine the association between uric acid or insulin and MetS. Logistic regression was used to determine the risk (odds ratio) of developing MetS. Biological interactions were determined by the PROCESS Macro and Anderson's method. Insulin and uric acid levels were elevated in MetS positive group (p uric acid and insulin was associated with the number of MetS components (PROCESS Model 1, interaction coefficient = -0.009, 95%CI: -0.017 to -0.001, p = .036). Johnson-Neyman analysis suggests the interaction is lost when uric acid concentration increased >7.0 mg/dL. When the cohort was separated by hyperinsulinemia and hyperuricemia, there was a significant risk of developing MetS for subjects with hyperuricemia (odds ratio = 2.3; 95%CI: 1.1-4.8, p uric acid and insulin augments the prevalence of MetS; however, no biological interaction was determined for hyperuricemia and hyperinsulinemia. Copyright © 2017 Diabetes India. Published by Elsevier Ltd. All rights reserved.

Augmented reality: a review.

Science.gov (United States)

Berryman, Donna R

2012-01-01

Augmented reality is a technology that overlays digital information on objects or places in the real world for the purpose of enhancing the user experience. It is not virtual reality, that is, the technology that creates a totally digital or computer created environment. Augmented reality, with its ability to combine reality and digital information, is being studied and implemented in medicine, marketing, museums, fashion, and numerous other areas. This article presents an overview of augmented reality, discussing what it is, how it works, its current implementations, and its potential impact on libraries.

Use of Augmented Reality in Education

OpenAIRE

Jeřábek, Tomáš

2014-01-01

This thesis deals with phenomena of augmented reality in context of didactics. The thesis aims to define augmented reality in conceptual and content area and focuses on augmented reality in the structure of educational tools and identification of its functions and use from the didactical standpoint. The thesis characterizes augmented reality as a specific technological-perceptual concept and establishes a system of perceptual, technological and resulting aspects that reflect important paramet...

Bayesian Alternation During Tactile Augmentation

Directory of Open Access Journals (Sweden)

Caspar Mathias Goeke

2016-10-01

Full Text Available A large number of studies suggest that the integration of multisensory signals by humans is well described by Bayesian principles. However, there are very few reports about cue combination between a native and an augmented sense. In particular, we asked the question whether adult participants are able to integrate an augmented sensory cue with existing native sensory information. Hence for the purpose of this study we build a tactile augmentation device. Consequently, we compared different hypotheses of how untrained adult participants combine information from a native and an augmented sense. In a two-interval forced choice (2 IFC task, while subjects were blindfolded and seated on a rotating platform, our sensory augmentation device translated information on whole body yaw rotation to tactile stimulation. Three conditions were realized: tactile stimulation only (augmented condition, rotation only (native condition, and both augmented and native information (bimodal condition. Participants had to choose one out of two consecutive rotations with higher angular rotation. For the analysis, we fitted the participants’ responses with a probit model and calculated the just notable difference (JND. Then we compared several models for predicting bimodal from unimodal responses. An objective Bayesian alternation model yielded a better prediction (χred2 = 1.67 than the Bayesian integration model (χred2= 4.34. Slightly higher accuracy showed a non-Bayesian winner takes all model (χred2= 1.64, which either used only native or only augmented values per subject for prediction. However the performance of the Bayesian alternation model could be substantially improved (χred2= 1.09 utilizing subjective weights obtained by a questionnaire. As a result, the subjective Bayesian alternation model predicted bimodal performance most accurately among all tested models. These results suggest that information from augmented and existing sensory modalities in

Augmented Reality

DEFF Research Database (Denmark)

Kjærgaard, Hanne Wacher; Kjeldsen, Lars Peter Bech; Rahn, Annette

2015-01-01

This chapter describes the use of iPad-facilitated application of augmented reality in the teaching of highly complex anatomical and physiological subjects in the training of nurses at undergraduate level. The general aim of the project is to investigate the potentials of this application in terms...... of making the complex content and context of these subjects more approachable to the students through the visualization made possible through the use of this technology. A case study is described in this chapter. Issues and factors required for the sustainable use of the mobile-facilitated application...... of augmented reality are discussed....

Affordances in Mobile Augmented Reality Applications

OpenAIRE

Gjøsæter, Tor

2014-01-01

This paper explores the affordances of augmented reality content in a mobile augmented reality application. A user study was conducted by performing a multi-camera video recording of seven think aloud sessions. The think aloud sessions consisted of individual users performing tasks, exploring and experiencing a mobile augmented reality (MAR) application we developed for the iOS platform named ARad. We discuss the instrumental affordances we observed when users interacted with augmented realit...

Dynamic augmentation restores anterior tibial translation in ACL suture repair: a biomechanical comparison of non-, static and dynamic augmentation techniques.

Science.gov (United States)

Hoogeslag, Roy A G; Brouwer, Reinoud W; Huis In 't Veld, Rianne; Stephen, Joanna M; Amis, Andrew A

2018-02-03

There is a lack of objective evidence investigating how previous non-augmented ACL suture repair techniques and contemporary augmentation techniques in ACL suture repair restrain anterior tibial translation (ATT) across the arc of flexion, and after cyclic loading of the knee. The purpose of this work was to test the null hypotheses that there would be no statistically significant difference in ATT after non-, static- and dynamic-augmented ACL suture repair, and they will not restore ATT to normal values across the arc of flexion of the knee after cyclic loading. Eleven human cadaveric knees were mounted in a test rig, and knee kinematics from 0° to 90° of flexion were recorded by use of an optical tracking system. Measurements were recorded without load and with 89-N tibial anterior force. The knees were tested in the following states: ACL-intact, ACL-deficient, non-augmented suture repair, static tape augmentation and dynamic augmentation after 10 and 300 loading cycles. Only static tape augmentation and dynamic augmentation restored ATT to values similar to the ACL-intact state directly postoperation, and maintained this after cyclic loading. However, contrary to dynamic augmentation, the ATT after static tape augmentation failed to remain statistically less than for the ACL-deficient state after cyclic loading. Moreover, after cyclic loading, ATT was significantly less with dynamic augmentation when compared to static tape augmentation. In contrast to non-augmented ACL suture repair and static tape augmentation, only dynamic augmentation resulted in restoration of ATT values similar to the ACL-intact knee and decreased ATT values when compared to the ACL-deficient knee immediately post-operation and also after cyclic loading, across the arc of flexion, thus allowing the null hypotheses to be rejected. This may assist healing of the ruptured ACL. Therefore, this study would support further clinical evaluation of dynamic augmentation of ACL repair.

Augment-type two stage accelerator

International Nuclear Information System (INIS)

Ogino, Mutsuo; Azuma, Kingo.

1995-01-01

When a flying body accelerated by a gas gun at a first stage enters into an augment rail passing through an introduction tube, an ignition capacitor for initial plasmas is turned ON to apply a voltage between the augment rails. Subsequently, the accelerating gas present behind the flying body is formed into plasmas by a laser, to flow electric current from one of the inner augment rails → plasma armature → the other of the inner augment rails, and additionally accelerate the flying body by Lorentz force formed in this case. Since the plasmas are maintained in a state of higher density than the plasmas obtained by using all of the augment rails, the ignition capacitor for initial plasmas in switched to a power source. As a result, it is possible to flow the maximum current before the plasmas expand, and a large accelerating force and a high magnetic flux density are attained, to improve acceleration performance of the flying body. (N.H.)

2-Dimensional changes of the soft tissue profile of augmented and non-augmented human extraction sockets: a randomized pilot study.

Science.gov (United States)

Flügge, Tabea; Nelson, Katja; Nack, Claudia; Stricker, Andres; Nahles, Susanne

2015-04-01

This study identified the soft tissue changes of the alveolar ridge at different time points within 12 weeks after tooth extraction with and without socket augmentation. In 38 patients with single tooth extractions, 40 sockets were augmented and 39 extraction sockets were not augmented. At 2, 4, 6, 8 and 12 weeks impressions were taken and casts digitized with a laser scanner. The horizontal and vertical changes were compared between augmented and non-augmented sites. A p-value sockets were between 0.4 mm (2 weeks) and 0.8 mm (12 weeks). In non-augmented sockets changes of 0.7 mm (2 weeks) and of 1.0 mm (12 weeks) were demonstrated. The mean values differed significantly between the buccal and oral region (p sockets showed less resorption within 4 weeks after extraction compared to non-augmented sockets. Non-augmented sockets showed a continuous dimensional loss with a great variation over 12 weeks whereas augmented sockets had the highest degree of resorption between 4 and 6 weeks. At 12 weeks a comparable resorption in augmented and non-augmented sockets was observed. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Augmented assessment as a means to augmented reality.

Science.gov (United States)

Bergeron, Bryan

2006-01-01

Rigorous scientific assessment of educational technologies typically lags behind the availability of the technologies by years because of the lack of validated instruments and benchmarks. Even when the appropriate assessment instruments are available, they may not be applied because of time and monetary constraints. Work in augmented reality, instrumented mannequins, serious gaming, and similar promising educational technologies that haven't undergone timely, rigorous evaluation, highlights the need for assessment methodologies that address the limitations of traditional approaches. The most promising augmented assessment solutions incorporate elements of rapid prototyping used in the software industry, simulation-based assessment techniques modeled after methods used in bioinformatics, and object-oriented analysis methods borrowed from object oriented programming.

Augmented Reality Using JavaScript

OpenAIRE

Hailemichael, Aida

2013-01-01

The project goal was to provide a mobile application, for a venue called Kulturhuset Karelia which is located in Tammisaari Finland. In this paper, the concept of Augmented Reality technology is briefly discussed along with the mobile application for the venue. The utilisation of JavaScript for creating Augmented reality content for mobile Augmented reality browser is also demonstrated. The application was created by using Architecht API which is Jacvascript library based on the Wikitude...

Augmented Reality for Multi-disciplinary Collaboration

OpenAIRE

Wang, Xiangyu; Rui,

2010-01-01

This chapter presents a framework for multi-disciplinary collaboration. Tangible Augmented Reality has been raised as one of suitable systems for design collaboration. Furthermore, it emphasizes the advantages of Tangible Augmented Reality to illustrate the needs for integrating the Tangible User Interfaces and Augmented Reality Systems.

Performance of a self-augmented railgun

International Nuclear Information System (INIS)

Burton, R.L.; Witherspoon, F.D.; Goldstein, S.A.

1991-01-01

The accelerating force of a railgun 1/2L'I 2 a can be increased by augmenting the self-induced magnetic field created by the armature current. Augmentation fields can be produced by external current coils or, as is done here, by shorting the railgun muzzle, and using the gun rails as the augmentation coil. Experimental results are presented for a 3.6-m railgun operated in this self-augmented mode, and effective inductance gradients are achieved which are as much as 9.3 times that of the unaugmented gun. A circuit model is presented which explains features of the measured shunt current and voltage. It is concluded that self-augmentation is an effective way to reduce ohmic heating in the armature of a railgun

INFORMATION VIA AUGMENTED

OpenAIRE

Tetteh, Sampson

2015-01-01

The vast majority of mobile technology today has developed over the past dec-ades. The thirst for information and communication has brought about high data transfer speed on modern mobile handset devices. This makes it possible for Augmented Reality to be used on mobile phones. Vaasa University of Applied Science, Technobothnia science resource center and Lumivaara Museum saw the importance of information and decided to embark on a pilot project where Augmented Reality will not be only us...

Vortex lift augmentation by suction on a 60 deg swept Gothic wing

Science.gov (United States)

Taylor, A. H.; Jackson, L. R.; Huffman, J. K.

1982-01-01

An experimental investigation was conducted in the Langley high-speed 7- by 10-foot wind tunnel to determine the aerodynamic performance of suction applied near the wing tips above the trailing edge of a 60 deg swept Gothic wing. Moveable suction inlets were symmetrically mounted in the proximity of the trailing edge, and the amount of suction was varied to maximize wing lift. Tests were conducted at Mach 0.15, 0.30, and 0.45, and the angle of attack was varied from -4 to 50 deg. The suction augmentation increases the lift coefficient over the entire range of angle of attack. The lift improvement exceeds the unaugmented wing lift by over 20%. Moreover, the augmented lift exceeds the lift predicted by vortex lattice theory to 30 deg angle of attack. Suction augmentation is postulated to strengthen the vortex system by increasing its velocity and making it more concentrated. This causes the vortex breakdown to be delayed to a higher angle of attack

INTEGRATIVE AUGMENTATION OF STANDARDIZED MANAGEMENT SYSTEMS

Directory of Open Access Journals (Sweden)

Stanislav Karapetrovic

2008-03-01

Full Text Available The development, features and integrating abilities of different international standards related to management systems are discussed. A group of such standards that augment the performance of quality management systems in organizations is specifically focused on. The concept, characteristics and an illustrative example of one augmenting standard, namely ISO 10001, are addressed. Integration of standardized augmenting systems, both by themselves and within the overall management system, is examined. It is argued that, in research and practice alike, integrative augmentation represents the future of standardized quality and other management systems.

AUGMENTATION-RELATED BRAIN PLASTICITY

Directory of Open Access Journals (Sweden)

Giovanni eDi Pino

2014-06-01

Full Text Available Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyzes the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain.Hitherto, few studies investigated the neural correlates of augmentation, but clues on it can be borrowed from logically-related paradigms: sensorimotor training, cognitive enhancement, cross-modal plasticity, sensorimotor functional substitution, use and embodiment of tools.Augmentation modifies function and structure of a number of areas, i.e. primary sensory cortices shape their receptive fields to become sensitive to novel inputs. Motor areas adapt the neuroprosthesis representation firing-rate to refine kinematics. As for normal motor outputs, the learning process recruits motor and premotor cortices and the acquisition of proficiency decreases attentional recruitment, focuses the activity on sensorimotor areas and increases the basal ganglia drive on the cortex. Augmentation deeply relies on the frontoparietal network. In particular, premotor cortex is involved in learning the control of an external effector and owns the tool motor representation, while the intraparietal sulcus extracts its visual features. In these areas, multisensory integration neurons enlarge their receptive fields to embody supernumerary limbs. For operating an anthropomorphic neuroprosthesis, the mirror system is required to understand the meaning of the action, the cerebellum for the formation of its internal model and the insula for its interoception. In conclusion, anthropomorphic sensorized devices can provide the critical sensory afferences to evolve the exploitation of tools through their embodiment, reshaping the body representation and the

Confronting an Augmented Reality

Science.gov (United States)

Munnerley, Danny; Bacon, Matt; Wilson, Anna; Steele, James; Hedberg, John; Fitzgerald, Robert

2012-01-01

How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself ? In this article, we seek to initiate a discussion that focuses on these questions, and…

Advanced Intellect-Augmentation Techniques.

Science.gov (United States)

Engelbart, D. C.

This progress report covers a two-year project which is part of a program that is exploring the value of computer aids in augmenting human intellectual capability. The background and nature of the program, its resources, and the activities it has undertaken are outlined. User experience in applying augmentation tools and techniques to various…

Novel Augmentation Strategies in Major Depression

DEFF Research Database (Denmark)

Martiny, Klaus

2017-01-01

Hypothesis The hypotheses of all the four included studies share the common idea that it is possible to augment the effect of antidepressant drug treatment by applying different interventions and with each intervention attain a clinically meaningful better effect compared to a control condition...... and randomised to augmentation with either active or placebo matching pindolol tablets. In the PEMF study patients were continued on ongoing medication and randomised to augmentation with active or inactive (sham) 30 minutes daily PEMF treatment on weekdays. In the Chronos study all patients were treated...... The results from the Pindolol study showed that pindolol did not augment the effect of venlafaxine for the whole sample. However, for those patients classified as slow metabolizers, based on their O-desmethylvenlafaxine/venlafaxine ratio (ODV/V), pindolol did augment the antidepressant effect. For patients...

Augmented Reality for Science Education

DEFF Research Database (Denmark)

Brandt, Harald; Nielsen, Birgitte Lund; Georgsen, Marianne

Augmented reality (AR) holds great promise as a learning tool. So far, however, most research has looked at the technology itself – and AR has been used primarily for commercial purposes. As a learning tool, AR supports an inquiry-based approach to science education with a high level of student...... involvement. The AR-sci-project (Augmented Reality for SCIence education) addresses the issue of applying augmented reality in developing innovative science education and enhancing the quality of science teaching and learning....

Augmented Reality on Android

OpenAIRE

Chunghan Li; Chang-Shyh Peng; Daisy F. Sang

2013-01-01

Augmented Reality is an application which combines a live view of real-world environment and computer-generated images. This paper studies and demonstrates an efficient Augmented Reality development in the mobile Android environment with the native Java language and Android SDK. Major components include Barcode Reader, File Loader, Marker Detector, Transform Matrix Generator, and a cloud database.

Augmenting Locomotion in an Anthropomorphic System

Directory of Open Access Journals (Sweden)

Derek Wight

2005-02-01

Full Text Available A powered orthosis has applications ranging from assisting the elderly to augmenting astronauts. An assistive control scheme is developed that uses the force from a slave actuator to augment the force of a master actuator. This can be used to augment a closed-loop control scheme applied to the master actuator. Initially, actuator augmentation is explored both theoretically and experimentally using a simple mechanical system. The control scheme is then applied to a scale model of human lower limbs on a stationary bicycle to investigate the feasibility of a powered orthosis using pneumatic muscle actuators.

Alveolar ridge and maxillary sinus augmentation using rhBMP-2: a systematic review.

Science.gov (United States)

Freitas, Rubens Moreno de; Spin-Neto, Rubens; Marcantonio Junior, Elcio; Pereira, Luís Antônio Violin Dias; Wikesjö, Ulf M E; Susin, Cristiano

2015-01-01

The aim of this systematic review was to evaluate clinical and safety data for recombinant human bone morphogenetic protein-2 (rhBMP-2) in an absorbable collagen sponge (ACS) carrier when used for alveolar ridge/maxillary sinus augmentation in humans. Clinical studies/case series published 1980 through June 2012 using rhBMP-2/ACS were searched. Studies meeting the following criteria were considered eligible for inclusion: >10 subjects at baseline and maxillary sinus or alveolar ridge augmentation not concomitant with implant placement. Seven of 69 publications were eligible for review. rhBMP-2/ACS yielded clinically meaningful bone formation for maxillary sinus augmentation that would allow placement of regular dental implants without consistent differences between rhBMP-2 concentrations. Nevertheless, the statistical analysis showed that sinus augmentation following autogenous bone graft was significantly greater (mean bone height: 1.6 mm, 95% CI: 0.5-2.7 mm) than for rhBMP-2/ACS (rhBMP-2 at 1.5 mg/mL). In extraction sockets, rhBMP-2/ACS maintained alveolar ridge height while enhancing alveolar ridge width. Safety reports did not represent concerns for the proposed indications. rhBMP-2/ACS appears a promising alternative to autogenous bone grafts for alveolar ridge/maxillary sinus augmentation; dose and carrier optimization may expand its efficacy, use, and clinical application. © 2013 Wiley Periodicals, Inc.

The role of imaging in pediatric bladder augmentation

Energy Technology Data Exchange (ETDEWEB)

Breen, Micheal; Chow, Jeanne S. [Boston Children' s Hospital, Department of Radiology, Boston, MA (United States); Phelps, Andrew [UCSF Benioff Children' s Hospital San Francisco, Department of Radiology and Biomedical Imaging, San Francisco, CA (United States); Estrada, Carlos [Boston Children' s Hospital, Department of Urology, Boston, MA (United States)

2015-09-15

Bladder augmentation (also called augmentation cystoplasty) refers to a number of surgical methods that increase the capacity and compliance of the urinary bladder. Imaging has an important role in the postoperative evaluation of bladder augmentation. The most common augmentation procedures utilize enteric segments to augment the bladder. The various types of bladder augmentation have characteristic appearances on different imaging modalities. Spontaneous bladder perforation is a complication that is seen in both early and late post-operative periods and it is one of the most important complications for radiologists to be aware of as it is life-threatening. We review the indications for bladder augmentation in children, the surgical techniques employed, the normal postoperative appearances on imaging studies and the role of imaging complications of bladder augmentation including delayed spontaneous bladder rupture, which is life-threatening. (orig.)

Repeated vertebral augmentation for new vertebral compression fractures of postvertebral augmentation patients: a nationwide cohort study

Directory of Open Access Journals (Sweden)

Liang CL

2015-03-01

Full Text Available Cheng-Loong Liang,1 Hao-Kwan Wang,1 Fei-Kai Syu,2 Kuo-Wei Wang,1 Kang Lu,1 Po-Chou Liliang1 1Department of Neurosurgery, E-Da Hospital, I-Shou University, Kaohsiung City, Taiwan; 2Department of Pharmacy, China Medical University Hospital, Taichung City, Taiwan Purpose: Postvertebral augmentation vertebral compression fractures are common; repeated vertebral augmentation is usually performed for prompt pain relief. This study aimed to evaluate the incidence and risk factors of repeat vertebral augmentation.Methods: We performed a retrospective, nationwide, population-based longitudinal observation study, using the National Health Insurance Research Database (NHIRD of Taiwan. All patients who received vertebral augmentation for vertebral compression fractures were evaluated. The collected data included patient characteristics (demographics, comorbidities, and medication exposure and repeat vertebral augmentation. Kaplan–Meier and stratified Cox proportional hazard regressions were performed for analyses.Results: The overall incidence of repeat vertebral augmentation was 11.3% during the follow-up until 2010. Patients with the following characteristics were at greater risk for repeat vertebral augmentation: female sex (AOR=1.24; 95% confidence interval [CI]: 1.10–2.36, advanced age (AOR=1.60; 95% CI: 1.32–2.08, diabetes mellitus (AOR=4.31; 95% CI: 4.05–5.88, cerebrovascular disease (AOR=4.09; 95% CI: 3.44–5.76, dementia (AOR=1.97; 95% CI: 1.69–2.33, blindness or low vision (AOR=3.72; 95% CI: 2.32–3.95, hypertension (AOR=2.58; 95% CI: 2.35–3.47, and hyperlipidemia (AOR=2.09; 95% CI: 1.67–2.22. Patients taking calcium/ vitamin D (AOR=2.98; 95% CI: 1.83–3.93, bisphosphonates (AOR=2.11; 95% CI: 1.26–2.61, or calcitonin (AOR=4.59; 95% CI: 3.40–5.77 were less likely to undergo repeat vertebral augmentation; however, those taking steroids (AOR=7.28; 95% CI: 6.32–8.08, acetaminophen (AOR=3.54; 95% CI: 2.75–4.83, or nonsteroidal

Hybrid-augmented intelligence:collaboration and cognition

Institute of Scientific and Technical Information of China (English)

Nan-ning ZHENG; Zi-yi LIU; Peng-ju REN; Yong-qiang MA; Shi-tao CHEN; Si-yu YU; Jian-ru XUE

2017-01-01

The long-term goal of artificial intelligence (AI) is to make machines learn and think like human beings. Due to the high levels of uncertainty and vulnerability in human life and the open-ended nature of problems that humans are facing, no matter how intelligent machines are, they are unable to completely replace humans. Therefore, it is necessary to introduce human cognitive capabilities or human-like cognitive models into AI systems to develop a new form of AI, that is, hybrid-augmented intelligence. This form of AI or machine intelligence is a feasible and important developing model. Hybrid-augmented intelligence can be divided into two basic models:one is human-in-the-loop augmented intelligence with human-computer collaboration, and the other is cognitive computing based augmented intelligence, in which a cognitive model is embedded in the machine learning system. This survey describes a basic framework for human-computer collaborative hybrid-augmented intelligence, and the basic elements of hybrid-augmented intelligence based on cognitive computing. These elements include intuitive reasoning, causal models, evolution of memory and knowledge, especially the role and basic principles of intuitive reasoning for complex problem solving, and the cognitive learning framework for visual scene understanding based on memory and reasoning. Several typical applications of hybrid-augmented intelligence in related fields are given.

ARSC: Augmented Reality Student Card--An Augmented Reality Solution for the Education Field

Science.gov (United States)

El Sayed, Neven A. M.; Zayed, Hala H.; Sharawy, Mohamed I.

2011-01-01

Augmented Reality (AR) is the technology of adding virtual objects to real scenes through enabling the addition of missing information in real life. As the lack of resources is a problem that can be solved through AR, this paper presents and explains the usage of AR technology we introduce Augmented Reality Student Card (ARSC) as an application of…

Mersiline mesh in premaxillary augmentation.

Science.gov (United States)

Foda, Hossam M T

2005-01-01

Premaxillary retrusion may distort the aesthetic appearance of the columella, lip, and nasal tip. This defect is characteristically seen in, but not limited to, patients with cleft lip nasal deformity. This study investigated 60 patients presenting with premaxillary deficiencies in which Mersiline mesh was used to augment the premaxilla. All the cases had surgery using the external rhinoplasty technique. Two methods of augmentation with Mersiline mesh were used: the Mersiline roll technique, for the cases with central symmetric deficiencies, and the Mersiline packing technique, for the cases with asymmetric deficiencies. Premaxillary augmentation with Mersiline mesh proved to be simple technically, easy to perform, and not associated with any complications. Periodic follow-up evaluation for a mean period of 32 months (range, 12-98 months) showed that an adequate degree of premaxillary augmentation was maintained with no clinically detectable resorption of the mesh implant.

Augmented Reality-Guided Lumbar Facet Joint Injections.

Science.gov (United States)

Agten, Christoph A; Dennler, Cyrill; Rosskopf, Andrea B; Jaberg, Laurenz; Pfirrmann, Christian W A; Farshad, Mazda

2018-05-08

The aim of this study was to assess feasibility and accuracy of augmented reality-guided lumbar facet joint injections. A spine phantom completely embedded in hardened opaque agar with 3 ring markers was built. A 3-dimensional model of the phantom was uploaded to an augmented reality headset (Microsoft HoloLens). Two radiologists independently performed 20 augmented reality-guided and 20 computed tomography (CT)-guided facet joint injections each: for each augmented reality-guided injection, the hologram was manually aligned with the phantom container using the ring markers. The radiologists targeted the virtual facet joint and tried to place the needle tip in the holographic joint space. Computed tomography was performed after each needle placement to document final needle tip position. Time needed from grabbing the needle to final needle placement was measured for each simulated injection. An independent radiologist rated images of all needle placements in a randomized order blinded to modality (augmented reality vs CT) and performer as perfect, acceptable, incorrect, or unsafe. Accuracy and time to place needles were compared between augmented reality-guided and CT-guided facet joint injections. In total, 39/40 (97.5%) of augmented reality-guided needle placements were either perfect or acceptable compared with 40/40 (100%) CT-guided needle placements (P = 0.5). One augmented reality-guided injection missed the facet joint space by 2 mm. No unsafe needle placements occurred. Time to final needle placement was substantially faster with augmented reality guidance (mean 14 ± 6 seconds vs 39 ± 15 seconds, P Augmented reality-guided facet joint injections are feasible and accurate without potentially harmful needle placement in an experimental setting.

Magnetic field induced augmented thermal conduction phenomenon in magneto-nanocolloids

International Nuclear Information System (INIS)

Katiyar, Ajay; Dhar, Purbarun; Nandi, Tandra; Das, Sarit K.

2016-01-01

Magnetic field induced augmented thermal conductivity of magneto-nanocolloids involving nanoparticles, viz. Fe_2O_3, Fe_3O_4, NiO and Co_3O_4 dispersed in different base fluids have been reported. Experiments reveal the augmented thermal transport under external applied magnetic field. A maximum thermal conductivity enhancement ∼114% is attained at 7.0 vol% concentration and 0.1 T magnetic flux density for Fe_3O_4/EG magneto-nanocolloid. However, a maximum ∼82% thermal conductivity enhancement is observed for Fe_3O_4/kerosene magneto-nanocolloid for the same concentration but relatively at low magnetic flux density (∼0.06 T). Thereby, a strong effect of fluid as well as particle physical properties on the chain formation propensity, leading to enhanced conduction, in such systems is observed. Co_3O_4 nanoparticles show insignificant effect on the thermal conductivity enhancement of MNCs due to their minimal magnetic moment. A semi-empirical approach has been proposed to understand the mechanism and physics behind the thermal conductivity enhancement under external applied magnetic field, in tune with near field magnetostatic interactions as well as Neel relaxivity of the magnetic nanoparticles. Furthermore, the model is able to predict the phenomenon of enhanced thermal conductivity as a function of physical parameters and shows good agreement with the experimental observations. - Highlights: • Heat conduction in magneto-nanocolloids augments tremendously under magnetic field. • Oxide nanoparticles of Fe, Ni and Co dispersed in variant base fluids are used. • Enhancement in heat conduction is due to the formation of thermally conductive chains. • Proposed semi-empirical model shows good agreement with the experimental results.

Augmented marked graphs

CERN Document Server

Cheung, King Sing

2014-01-01

Petri nets are a formal and theoretically rich model for the modelling and analysis of systems. A subclass of Petri nets, augmented marked graphs possess a structure that is especially desirable for the modelling and analysis of systems with concurrent processes and shared resources.This monograph consists of three parts: Part I provides the conceptual background for readers who have no prior knowledge on Petri nets; Part II elaborates the theory of augmented marked graphs; finally, Part III discusses the application to system integration. The book is suitable as a first self-contained volume

Evidence that alpha-methyl-p-tyramine is implicated in behavioural augmentation to amphetamine.

Science.gov (United States)

Dougan, D F; Labrie, S L; Paull, P D; Duffield, P H; Wade, D N

1986-01-01

Behavioural studies showed that administration of alpha-methyl-p-tyramine (AMT; 10 mg/kg i.p.) to rats 24 hr before treatment with d-amphetamine (AMPHET; 4 mg/kg i.p.) resulted in augmentation of AMPHET-induced stereotype activity. Parallel experiments involving electro-chemical estimation of dopamine metabolites in the striatum showed that the decrease in the concentration of homovanillic acid (HVA) produced by AMPHET (4 mg/kg) was enhanced in AMT (10 mg/kg) pretreated animals. These findings suggest that AMT derived from previous doses of AMPHET may play a role in the phenomena of behavioural augmentation observed after chronic administration of AMPHET.

Augmented Reality and Mobile Art

Science.gov (United States)

Gwilt, Ian

The combined notions of augmented-reality (AR) and mobile art are based on the amalgamation of a number of enabling technologies including computer imaging, emergent display and tracking systems and the increased computing-power in hand-held devices such as Tablet PCs, smart phones, or personal digital assistants (PDAs) which have been utilized in the making of works of art. There is much published research on the technical aspects of AR and the ongoing work being undertaken in the development of faster more efficient AR systems [1] [2]. In this text I intend to concentrate on how AR and its associated typologies can be applied in the context of new media art practices, with particular reference to its application on hand-held or mobile devices.

[Cement augmentation on the spine : Biomechanical considerations].

Science.gov (United States)

Kolb, J P; Weiser, L; Kueny, R A; Huber, G; Rueger, J M; Lehmann, W

2015-09-01

Vertebral compression fractures are the most common osteoporotic fractures. Since the introduction of vertebroplasty and screw augmentation, the management of osteoporotic fractures has changed significantly. The biomechanical characteristics of the risk of adjacent fractures and novel treatment modalities for osteoporotic vertebral fractures, including pure cement augmentation by vertebroplasty, and cement augmentation of screws for posterior instrumentation, are explored. Eighteen human osteoporotic lumbar spines (L1-5) adjacent to vertebral bodies after vertebroplasty were tested in a servo-hydraulic machine. As augmentation compounds we used standard cement and a modified low-strength cement. Different anchoring pedicle screws were tested with and without cement augmentation in another cohort of human specimens with a simple pull-out test and a fatigue test that better reflects physiological conditions. Cement augmentation in the osteoporotic spine leads to greater biomechanical stability. However, change in vertebral stiffness resulted in alterations with the risk of adjacent fractures. By using a less firm cement compound, the risk of adjacent fractures is significantly reduced. Both screw augmentation techniques resulted in a significant increase in the withdrawal force compared with the group without cement. Augmentation using perforated screws showed the highest stability in the fatigue test. The augmentation of cement leads to a significant change in the biomechanical properties. Differences in the stability of adjacent vertebral bodies increase the risk of adjacent fractures, which could be mitigated by a modified cement compound with reduced strength. Screws that were specifically designed for cement application displayed greatest stability in the fatigue test.

Chin augmentation

Science.gov (United States)

... or bigger compared to the nose. The best candidates for chin augmentation are people with weak or ... www.urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. ...

Prototyping Augmented Reality

CERN Document Server

Mullen, Tony

2011-01-01

Learn to create augmented reality apps using Processing open-source programming language Augmented reality (AR) is used all over, and you may not even realize it. Smartphones overlay data onto live camera views to show homes for sale, restaurants, or historical sites. American football broadcasts use AR to show the invisible first-down line on the field to TV viewers. Nike and Budweiser, among others, have used AR in ads. Now, you can learn to create AR prototypes using 3D data, Processing open-source programming language, and other languages. This unique book is an easy-to-follow guide on how

Augmented reality som wearable technology

DEFF Research Database (Denmark)

Rahn, Annette

“How Augmented reality can facilitate learning in visualizing human anatomy “ At this station I demonstrate how Augmented reality can be used to visualize the human lungs in situ and as a wearable technology which establish connection between body, image and technology in education. I will show...

Interactive Assembly Guide using Augmented Reality

DEFF Research Database (Denmark)

Andersen, Martin; Andersen, Rasmus Skovgaard; Larsen, Christian Lindequist

2009-01-01

This paper presents an Augmented Reality system for aiding a pump assembling process at Grundfos, one of the leading pump producers. Stable pose estimation of the pump is required in order to augment the graphics correctly. This is achieved by matching image edges with synthesized edges from CAD...... norm. A dynamic visualization of the augmented graphics provides the user with guidance. Usability tests show that the accuracy of the system is sufficient for assembling the pump....

Augmented reality for breast imaging.

Science.gov (United States)

Rancati, Alberto; Angrigiani, Claudio; Nava, Maurizio B; Catanuto, Giuseppe; Rocco, Nicola; Ventrice, Fernando; Dorr, Julio

2018-02-21

Augmented reality (AR) enables the superimposition of virtual reality reconstructions onto clinical images of a real patient, in real time. This allows visualization of internal structures through overlying tissues, thereby providing a virtual transparency vision of surgical anatomy. AR has been applied to neurosurgery, which utilizes a relatively fixed space, frames, and bony references; the application of AR facilitates the relationship between virtual and real data. Augmented Breast imaging (ABI) is described. Breast MRI studies for breast implant patients with seroma were performed using a Siemens 3T system with a body coil and a four-channel bilateral phased-array breast coil as the transmitter and receiver, respectively. The contrast agent used was (CA) gadolinium (Gd) injection (0.1 mmol/kg at 2 ml/s) by a programmable power injector. Dicom formated images data from 10 MRI cases of breast implant seroma and 10 MRI cases with T1-2 N0 M0 breast cancer, were imported and transformed into Augmented reality images. Augmented breast imaging (ABI) demonstrated stereoscopic depth perception, focal point convergence, 3D cursor use, and joystick fly-through. Augmented breast imaging (ABI) to the breast can improve clinical outcomes, giving an enhanced view of the structures to work on. It should be further studied to determine its utility in clinical practice.

Magnetic field induced augmented thermal conduction phenomenon in magneto-nanocolloids

Energy Technology Data Exchange (ETDEWEB)

Katiyar, Ajay, E-mail: ajay_cim@rediffmail.com [Research and Innovation Centre (DRDO), Indian Institute of Technology Madras Research Park, Chennai 600 113 (India); Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600 036 (India); Dhar, Purbarun, E-mail: purbarun@iitrpr.ac.in [Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600 036 (India); Nandi, Tandra, E-mail: tandra_n@rediffmail.com [Defence Materials and Stores Research and Development Establishment (DRDO), G.T. Road, Kanpur 208 013 (India); Das, Sarit K., E-mail: skdas@iitrpr.ac.in [Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600 036 (India)

2016-12-01

Magnetic field induced augmented thermal conductivity of magneto-nanocolloids involving nanoparticles, viz. Fe{sub 2}O{sub 3}, Fe{sub 3}O{sub 4}, NiO and Co{sub 3}O{sub 4} dispersed in different base fluids have been reported. Experiments reveal the augmented thermal transport under external applied magnetic field. A maximum thermal conductivity enhancement ∼114% is attained at 7.0 vol% concentration and 0.1 T magnetic flux density for Fe{sub 3}O{sub 4}/EG magneto-nanocolloid. However, a maximum ∼82% thermal conductivity enhancement is observed for Fe{sub 3}O{sub 4}/kerosene magneto-nanocolloid for the same concentration but relatively at low magnetic flux density (∼0.06 T). Thereby, a strong effect of fluid as well as particle physical properties on the chain formation propensity, leading to enhanced conduction, in such systems is observed. Co{sub 3}O{sub 4} nanoparticles show insignificant effect on the thermal conductivity enhancement of MNCs due to their minimal magnetic moment. A semi-empirical approach has been proposed to understand the mechanism and physics behind the thermal conductivity enhancement under external applied magnetic field, in tune with near field magnetostatic interactions as well as Neel relaxivity of the magnetic nanoparticles. Furthermore, the model is able to predict the phenomenon of enhanced thermal conductivity as a function of physical parameters and shows good agreement with the experimental observations. - Highlights: • Heat conduction in magneto-nanocolloids augments tremendously under magnetic field. • Oxide nanoparticles of Fe, Ni and Co dispersed in variant base fluids are used. • Enhancement in heat conduction is due to the formation of thermally conductive chains. • Proposed semi-empirical model shows good agreement with the experimental results.

Aspects of User Experience in Augmented Reality

DEFF Research Database (Denmark)

Madsen, Jacob Boesen

in human factors related to Augmented Reality. This is investigated partly as how Augmented Reality applications are used in unsupervised settings, and partly in specific evaluations related to user performance in supervised settings. The thesis starts by introducing Augmented Reality to the reader......, followed by a presentation of the technical areas related to the field, and different human factor areas. As a contribution to the research area, this thesis presents five separate, but sequential, papers within the area of Augmented Reality.......In Augmented Reality applications, the real environment is annotated or enhanced with computer-generated graphics. This is a topic that has been researched in the recent decades, but for many people this is a brand new and never heard of topic. The main focus of this thesis is investigations...

The HART I augmented electric gun facility

International Nuclear Information System (INIS)

Fikse, D.A.; Ciesar, J.A.; Wehrli, H.A.; Rimersma, H.; Docherty, E.F.; Pipich, C.W.

1991-01-01

This paper reports on an augmented electric gun system that has been commissioned. This system, called HART I (Hypervelocity Augmented Railgun Test), is built around a double augmented rail arrangement with a 1.27-cm square bore. It is powered by the SUVAC II 5.6-MJ distributed capacitor power supply. This arrangement allows operation in a simple, series augmented, or transaugmented gun system configuration. The objective of this facility is to perform materials research augmentation studies, and armature development in the 10-km/s regime. Armature masses of 2 to 4 g will be accelerated in a 4-m long barrel. Baseline bore materials will begin with conventional G9/GlidCop systems and then move into pyrolytic boron nitride/refractory materials. Hybrids, plasma, and ablation stabilized armature systems are planned. The gun system is instrumented with plasma and rail B probes for inbore velocity measurements. In addition, breech and muzzle voltages, currents, and external velocities are measured. The HART I system is currently performing hypervelocity experiments to verify the augmentation models

Capacity of tumor necrosis factor to augment lymphocyte-mediated tumor cell lysis of malignant mesothelioma

International Nuclear Information System (INIS)

Bowman, R.V.; Manning, L.S.; Davis, M.R.; Robinson, B.W.

1991-01-01

Recombinant human tumor necrosis factor (rHuTNF) was evaluated both for direct anti-tumor action against human malignant mesothelioma and for its capacity to augment the generation and lytic phases of lymphocyte-mediated cytotoxicity against this tumor. rHuTNF was directly toxic by MTT assay to one of two mesothelioma cell lines evaluated, but had no effect on susceptibility to subsequent lymphocyte-mediated lysis of either line. TNF alone was incapable of generating anti-mesothelioma lymphokine-activated killer cell (LAK) activity. Furthermore, it did not augment the degree or LAK activity produced by submaximal interleukin-2 (IL-2) concentrations nor did it augment lysis of mesothelioma cells by natural killer (NK) or LAK effector cells during the 4-hr 51chromium release cytolytic reaction. The studies also suggest that mesothelioma targets are less responsive to TNF plus submaximal IL-2 concentrations than the standard LAK sensitive target Daudi, raising the possibility that intermediate LAK sensitive tumors such as mesothelioma may require separate and specific evaluation in immunomodulation studies. This in vitro study indicates that use of low-dose rHuTNF and IL-2 is unlikely to be an effective substitute for high-dose IL-2 in generation and maintenance of LAK activity in adoptive immunotherapy for mesothelioma

Augmented “Ouch!”. : How to create intersubjective augmented objects into which we can bump

NARCIS (Netherlands)

Liberati, Nicola

2015-01-01

The aim of this work is to provide the elements to design an intersubjective augmented reality in order to make the augmented objects part of our everyday world. This work will analyse intersubjectivity from a phenomenological point of view using the works by Husserl and Schutz. Thanks to these two

Breast Augmentation

African Journals Online (AJOL)

1974-04-13

Apr 13, 1974 ... Complications encountered after breast augmentation are dealt with in .... in Phisohex or other suitable preparation for a few days before surgery ... In all cases, the prosthesis causes a fibrous tissue capsule to form around it.

Marketing and Augmented Reality

OpenAIRE

Zelený, Martin

2010-01-01

The main goal of this diploma thesis is to identify the usage of augmented reality in contemporary marketing practice and the expectations of marketers for the future use. This will be achieved by conducting a quantitative and qualitative research among existing creative and advertising companies. Secondary goal is introducing the concept of augmented reality from the theoretical point of view and also description of potential utilization based on known examples. The tools for the practical p...

Augmented reality and its practical application

OpenAIRE

ZÍTKOVÁ, Helena

2011-01-01

This thesis combines topic of augmented reality with tourism. For analyzing the state of the use of augmented reality was composed case studies. It was created product, which is called Guide to mobile phone.

Augmented Fotonovelas: A Visual Methodology for Community Engaged Research

OpenAIRE

Hidalgo, LeighAnna Grace

2014-01-01

Augmented Fotonovelas draw upon the aesthetic of traditional fotonovelas, but incorporate new technologies--such as video interviews, interactive mapping, smart phone technology, and Augmented Reality (AR). Augmented Fotonovelas also make the most of the classic form, utilizing photographs, text, and bubble captions. Through this methodology, new and old come together to produce Augmented Scholarship. I define Augmented Scholarship as knowledge production bridging the gap between communities ...

Augmenting the Web through Open Hypermedia

DEFF Research Database (Denmark)

Bouvin, N.O.

2003-01-01

Based on an overview of Web augmentation and detailing the three basic approaches to extend the hypermedia functionality of the Web, the author presents a general open hypermedia framework (the Arakne framework) to augment the Web. The aim is to provide users with the ability to link, annotate, a......, and otherwise structure Web pages, as they see fit. The paper further discusses the possibilities of the concept through the description of various experiments performed with an implementation of the framework, the Arakne Environment......Based on an overview of Web augmentation and detailing the three basic approaches to extend the hypermedia functionality of the Web, the author presents a general open hypermedia framework (the Arakne framework) to augment the Web. The aim is to provide users with the ability to link, annotate...

Muzzle shunt augmentation of conventional railguns

International Nuclear Information System (INIS)

Parker, J.V.

1991-01-01

This paper reports on augmentation which is a technique for reducing the armature current and hence the armature power dissipation in a plasma armature railgun. In spite of the advantages, no large augmented railguns have been built, primarily due to the mechanical and electrical complexity introduced by the extra conductors required. it is possible to achieve some of the benefits of augmentation in a conventional railgun by diverting a fraction φ of the input current through a shunt path at the muzzle of the railgun. In particular, the relation between force and armature current is the same as that obtained in an n-turn, series-connected augmented railgun with n = 1/(1 - φ). The price of this simplification is a reduction in electrical efficiency and some additional complexity in the external electrical system

Aplikasi Web Augmented Reality Villa

Directory of Open Access Journals (Sweden)

Gede Yudha Prema Pangestu

2017-07-01

Full Text Available Bali is one of the highly developed tourist destination in Indonesia. The arrival of tourists having holiday in Bali led to increase residential needs with complete amenities. The occupancy rate of hotel and villa in Bali is increase significantlly during the long vacation. The emergence of new villa and hotel occupancy raises the level of competition in business, so it needs a correct use good marketing communication strategy in marketing the product in order to attract the attention of consumers. Web Application Augmented Reality Villa can help visualize the residential villa in three-dimensional shapes that look more attractive and practical. The use of brochures as written information and the application of augmented reality technology on the Web Application Augmented Reality Villa aims to develop an application that can provide information about the villa to visitors. Web Application uses Augmented Reality Villa designed by FlarToolkit library. Based on the test results show the application can display 3-dimensional objects by scanning marker villa in a brochure which already contain marker.

Augmented Reality Comes to Physics

Science.gov (United States)

Buesing, Mark; Cook, Michael

2013-01-01

Augmented reality (AR) is a technology used on computing devices where processor-generated graphics are rendered over real objects to enhance the sensory experience in real time. In other words, what you are really seeing is augmented by the computer. Many AR games already exist for systems such as Kinect and Nintendo 3DS and mobile apps, such as…

Augmented reality implementation methods in mainstream applications

Directory of Open Access Journals (Sweden)

David Procházka

2011-01-01

Full Text Available Augmented reality has became an useful tool in many areas from space exploration to military applications. Although used theoretical principles are well known for almost a decade, the augmented reality is almost exclusively used in high budget solutions with a special hardware. However, in last few years we could see rising popularity of many projects focused on deployment of the augmented reality on dif­ferent mobile devices. Our article is aimed on developers who consider development of an augmented reality application for the mainstream market. Such developers will be forced to keep the application price, therefore also the development price, at reasonable level. Usage of existing image processing software library could bring a significant cut-down of the development costs. In the theoretical part of the article is presented an overview of the augmented reality application structure. Further, an approach for selection appropriate library as well as the review of the existing software libraries focused in this area is described. The last part of the article out­lines our implementation of key parts of the augmented reality application using the OpenCV library.

Augmented reality som wearable

DEFF Research Database (Denmark)

Buhl, Mie; Rahn, Annette

2015-01-01

Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR-applikat......Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR...

AUGMENTED REALITY - STATE OF KNOWLEDGE, USE AND EXPERIMENTATION

Directory of Open Access Journals (Sweden)

Mihaela Filofteia TUTUNEA

2013-12-01

Full Text Available Technologies for augmenting reality have been consolidated during the last decades, extending their applicability to more and more socio-economic areas. The rapid evolution of mobile technologies and virtualization of the digital environment have created auspicious conditions for massive extension and implementation of solutions for augmenting reality at global level. Experience has already shown that augmented reality, alongside virtual reality can offer very important support solutions in modeling the real world with the aim of extending the human capabilities of perception, allowing the opening of a new phase in the world’s socio-economic development. Starting from the evident tendencies that have manifested at global level in the development and implementation of augmented reality technologies, the paper begins with the presentation of the most important aspects related to augmented reality technologies, highlighting their main areas of application, and presents the study realized for identifying the level of knowledge, use and effective experimentation of augmented reality applications by mobile device users. The results of this study could be very useful to the socio-economic environment, starting with the field of research, continuing with developers and providers of augmented reality solutions, manufacturers and providers of hardware infrastructure support for augmented reality solutions and systems, final users of these solutions, both individuals and businesses, and experimenting digital communities.

Augmentation of sensory-evoked hemodynamic response in an early Alzheimer's disease mouse model.

Science.gov (United States)

Kim, Jinho; Jeong, Yong

2013-01-01

Based on enlarged blood oxygen level-dependent (BOLD) responses in cognitively normal subjects at risk for Alzheimer's disease (AD), compensatory neuronal hyperactivation has been proposed as an early marker for diagnosis of AD. The BOLD response results from neurovascular coupling, i.e., hemodynamic response induced by neuronal activity. However, there has been no evidence of task-induced increases in hemodynamic response in animal models of AD. Here, we observed an augmented hemodynamic response pattern in a transgenic AβPP(SWE)/PS1ΔE9 mouse model of AD using three in vivo imaging methods: intrinsic optical signal imaging, multi-photon laser scanning microscopy, and laser Doppler flowmetry. Sensory stimulation resulted in augmented and prolonged hemodynamic responses in transgenic mice evidenced by changes in total, oxygenated, and deoxygenated hemoglobin concentration. This difference between transgenic and wild-type mice was significant at 7 months of age when amyloid plaques and cerebral amyloid angiopathy had developed but not at younger or older ages. Correspondingly, sensory stimulation-induced pial arteriole diameter was also augmented and prolonged in transgenic mice at 7 months of age. Cerebral blood flow response in transgenic mice was augmented but not prolonged. These results are consistent with the existence of BOLD signal hyperactivation in non-demented AD-risk human subjects, supporting its potential use as an early diagnostic marker of AD.

Empirical evaluation of augmented prototyping effectiveness

Directory of Open Access Journals (Sweden)

Tomáš Koubek

2012-01-01

Full Text Available Augmented reality is a scientific field well known for more than twenty years. Although there is a huge number of projects that present promising results, the real usage of augmented reality applications for fulfilling common tasks is almost negligible. We believe that one of the principal reasons is insufficient usability of these applications. The situation is analogous to the desktop, mobile or cloud application development or even to the web pages design. The first phase of a technology adoption is the exploration of its potential. As soon as the technical problems are overcome and the technology is widely accepted, the usability is a principal issue. The usability is utmost important also from the business point of view. The cost of augmented reality implementation into the production process is substantial, therefore, the usability that is directly responsible for the implemented solution effectiveness must be appropriately tested. Consequently, the benefit of the implemented solution can be measured.This article briefly outlines common techniques used for usability evaluation. Discussed techniques were designed especially for evaluation of desktop applications, mobile solutions and web pages. In spite of this drawback, their application on augmented reality products is usually possible. Further, a review of existing augmented reality project evaluations is presented.Based on this review, a usability evaluation method for our augmented prototyping application is proposed. This method must overcome the fact that the design is a creative process. Therefore, it is not possible to take into account common criteria such as time consumption.

Augmented Reality

DEFF Research Database (Denmark)

Nielsen, Birgitte Lund; Brandt, Harald; Radmer, Ole

2017-01-01

Artiklen præsenterer resultater fra pilotafprøvning i 7.-klasses fysik/kemi og biologi af to Augmented Reality (AR)-apps til naturfagsundervisning. Muligheder og udfordringer ved lærerens stilladsering af elevernes undersøgende samtale og modelleringskompetence er undersøgt med interview...

Augmented Reality Tower Technology Assessment

Science.gov (United States)

Reisman, Ronald J.; Brown, David M.

2009-01-01

Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

Therapeutic options for lip augmentation.

Science.gov (United States)

Segall, Lorne; Ellis, David A F

2007-11-01

Aesthetic ideals vary with emerging fashion trends and within different cultures. However, over the past few decades, fuller lips have been considered a desirable trait. Many younger patients are presenting for lip augmentation to achieve the sought-after look commonly seen in many fashion magazines. In addition, as individuals age, they lose lip volume, with a thinning of the red lip, some effacement of the vermillion border, and elongation and flattening of the white portion of the lip. Rejuvenation of the lips plays a key role in restoring a more youthful appearance. As a result, lip augmentation appeals to a wide spectrum of patients who present with various different aesthetic goals and expectations. Numerous therapeutic options exist for aesthetic lip augmentation, ranging from temporary and permanent injectable fillers to implants and other surgical techniques.

A mathematical model for the study of lipid accumulation in oleaginous microorganisms. II. Study of cellular lipids of Mucor circinelloides during growth on a vegetable oil

Directory of Open Access Journals (Sweden)

Aggelis, G.

1995-10-01

Full Text Available Microbial oil production from fatty materials of animal or plant origin has been an object of research and industrial interest for many years. During the process of microbial growth/accumulation of fat reserves, the dominating phenomena that define the composition of endocellular fat are, first, the specific process of incorporation of substrate fatty acids into the microbial cell and, second, the endocellular changes of fatty acids defined by the enzymic capabilities of the microorganism. The fatty acids will either be degraded for growth needs or act as substrate of endocellular biotransformation processes, leading to concentration changes and production of "new" fatty acids which did not previously exist in the substrate.
The purpose of the present work is to study the endocellular lipids of Mucor circinelloidesCBS 172-27 grown on sunflower oil. The mathematical model, described in part I, was applied in order to investigate the following:
a. Microorganism specificity in the incorporation of substrate fatty acids.
b. Microorganism specificity in the degradation of fatty acids present in the reserve fat.
c. Possibilities of endocellular biotransformations during the microbial growth.
In conclusion, this work is aimed at developing a quantitative expression of parameters defining the lipid composition of fat reserves. The proposed mathematical model can be used not only for selection of microbial strains having specific enzymic potential but also for substrate selection.

La producción de aceites microbianos a partir de materiales grasos de origen animal o vegetal ha sido objeto de investigación e interés industrial durante muchos años. En el proceso de crecimiento microbiano/acumulación de reservas grasas, los fenómenos dominantes que definen la composición de grasa endocelular son, primero, el proceso específico de incorporación de ácidos grasos como sustratos en la célula microbiana

Augmented Reality Interfaces for Additive Manufacturing

DEFF Research Database (Denmark)

Eiríksson, Eyþór Rúnar; Pedersen, David Bue; Frisvad, Jeppe Revall

2017-01-01

This paper explores potential use cases for using augmented reality (AR) as a tool to operate industrial machines. As a baseline we use an additive manufacturing system, more commonly known as a 3D printer. We implement novel augmented interfaces and controls using readily available open source...

Affordances in Mobile Augmented Reality Applications

Directory of Open Access Journals (Sweden)

Tor Gjøsæter

2014-10-01

Full Text Available This paper explores the affordances of augmented reality content in a mobile augmented reality application. A user study was conducted by performing a multi-camera video recording of seven think aloud sessions. The think aloud sessions consisted of individual users performing tasks, exploring and experiencing a mobile augmented reality (MAR application we developed for the iOS platform named ARad. We discuss the instrumental affordances we observed when users interacted with augmented reality content, as well as more complex affordances rising from conventions from media content, AR and the traditional WIMP paradigm. We find that remediation of traditional newspaper content through the MAR medium can provide engaging, pleasing and exciting user experiences. However, the some of the content still suffers from being shoveled onto the MAR platform without adapting it properly. Finally, we discuss what content was most successfully mediated to the user and how the content impacts the user experience.

Augmented reality in surgery.

Science.gov (United States)

Shuhaiber, Jeffrey H

2004-02-01

To evaluate the history and current knowledge of computer-augmented reality in the field of surgery and its potential goals in education, surgeon training, and patient treatment. National Library of Medicine's database and additional library searches. Only articles suited to surgical sciences with a well-defined aim of study, methodology, and precise description of outcome were included. Augmented reality is an effective tool in executing surgical procedures requiring low-performance surgical dexterity; it remains a science determined mainly by stereotactic registration and ergonomics. Strong evidence was found that it is an effective teaching tool for training residents. Weaker evidence was found to suggest a significant influence on surgical outcome, both morbidity and mortality. No evidence of cost-effectiveness was found. Augmented reality is a new approach in executing detailed surgical operations. Although its application is in a preliminary stage, further research is needed to evaluate its long-term clinical impact on patients, surgeons, and hospital administrators. Its widespread use and the universal transfer of such technology remains limited until there is a better understanding of registration and ergonomics.

Enhancing tourism with augmented and virtual reality

OpenAIRE

Jenny, Sandra

2017-01-01

Augmented and virtual reality are on the advance. In the last twelve months, several interesting devices have entered the market. Since tourism is one of the fastest growing economic sectors in the world and has become one of the major players in international commerce, the aim of this thesis was to examine how tourism could be enhanced with augmented and virtual reality. The differences and functional principles of augmented and virtual reality were investigated, general uses were described ...

Augmented Reality: Daily Prayers for Preschooler Student

Directory of Open Access Journals (Sweden)

Hendra Pradibta

2018-01-01

Full Text Available Education is one of the aspects that many synthesized with technology. Yet, this is contrary to the fact that where most of the learning materials are still based on text. This research aims to develop an alternative learning media by implementing Augmented Reality Technology for Preschooler students. Augmented Reality (AR is an application that can combine the virtual object as text, pictures and animation into the real world. Development of Augmented Reality application uses Web Aurasma Based Studio, with learning materials of daily prayer for preschool student. The development of the characters and the animations were using Adobe Illustrator and Adobe After Effects. The results of the study showed that technology Augmented Reality can be used as an alternative learning media especially in the learning process in Preschool Al Furqon. This is because the content Augmented Reality in the form of animation can gives more understanding and attention for preschool student to follow the learning process

From Augmentation Media to Meme Media.

Science.gov (United States)

Tanaka, Yuzuru

Computers as meta media are now evolving from augmentation media vehicles to meme media vehicles. While an augmentation media system provides a seamlessly integrated environment of various tools and documents, meme media system provides further functions to edit and distribute tools and documents. Documents and tools on meme media can easily…

Potential costs of breast augmentation mammaplasty.

Science.gov (United States)

Schmitt, William P; Eichhorn, Mitchell G; Ford, Ronald D

2016-01-01

Augmentation mammaplasty is one of the most common surgical procedures performed by plastic surgeons. The aim of this study was to estimate the cost of the initial procedure and its subsequent complications, as well as project the cost of Food and Drug Administration (FDA)-recommended surveillance imaging. The potential costs to the individual patient and society were calculated. Local plastic surgeons provided billing data for the initial primary silicone augmentation and reoperative procedures. Complication rates used for the cost analysis were obtained from the Allergen Core study on silicone implants. Imaging surveillance costs were considered in the estimations. The average baseline initial cost of silicone augmentation mammaplasty was calculated at $6335. The average total cost of primary breast augmentation over the first decade for an individual patient, including complications requiring reoperation and other ancillary costs, was calculated at $8226. Each decade thereafter cost an additional $1891. Costs may exceed $15,000 over an averaged lifetime, and the recommended implant surveillance could cost an additional $33,750. The potential cost of a breast augmentation, which includes the costs of complications and imaging, is significantly higher than the initial cost of the procedure. Level III, economic and decision analysis study. Copyright © 2015 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

The Augmented REality Sandtable (ARES)

Science.gov (United States)

2015-10-01

Introduction The US Army Research Laboratory (ARL) Human Sciences Campaign calls out the topic of Virtual /Mixed and Augmented Reality as one of the...type of virtual environment. In virtual reality (VR), the totality of the environment is computer generated. In AR, the real world is augmented by...tangible user interfaces; and the effectiveness of virtual sand tables and similar systems. A market survey was also done to discover the state of

Augmented Reality: Daily Prayers for Preschooler Student

OpenAIRE

Hendra Pradibta

2018-01-01

Education is one of the aspects that many synthesized with technology. Yet, this is contrary to the fact that where most of the learning materials are still based on text. This research aims to develop an alternative learning media by implementing Augmented Reality Technology for Preschooler students. Augmented Reality (AR) is an application that can combine the virtual object as text, pictures and animation into the real world. Development of Augmented Reality application uses Web Aurasma Ba...

Applied Augmented Reality for High Precision Maintenance

Science.gov (United States)

Dever, Clark

Augmented Reality had a major consumer breakthrough this year with Pokemon Go. The underlying technologies that made that app a success with gamers can be applied to improve the efficiency and efficacy of workers. This session will explore some of the use cases for augmented reality in an industrial environment. In doing so, the environmental impacts and human factors that must be considered will be explored. Additionally, the sensors, algorithms, and visualization techniques used to realize augmented reality will be discussed. The benefits of augmented reality solutions in industrial environments include automated data recording, improved quality assurance, reduction in training costs and improved mean-time-to-resolution. As technology continues to follow Moore's law, more applications will become feasible as performance-per-dollar increases across all system components.

Augmented Reality in Tourism - Research and Applications Overview

Directory of Open Access Journals (Sweden)

Anabel L. Kečkeš

2017-06-01

Full Text Available Augmented reality is a complex interdisciplinary field utilizing information technologies in diverse areas such as medicine, education, architecture, industry, tourism and others, augmenting the real-time, real-world view with additional superimposed information in chosen format(s. The aim of this paper is to present an overview of both research and application aspects of using augmented reality technologies in tourism domain. While most research, and especially applications, are dealing with and developing visual-based augmented reality systems, there is a relevant amount of research discussing the utilization of other human senses such as tactioception and audioception, both being discussed within this work. A comprehensive literature analysis within this paper resulted with the identification, compilation and categorization of the key factors having the most relevant impact on the success of utilization of augmented technology in tourism domain.

Alternative realities : from augmented reality to mobile mixed reality

OpenAIRE

Claydon, Mark

2015-01-01

This thesis provides an overview of (mobile) augmented and mixed reality by clarifying the different concepts of reality, briefly covering the technology behind mobile augmented and mixed reality systems, conducting a concise survey of existing and emerging mobile augmented and mixed reality applications and devices. Based on the previous analysis and the survey, this work will next attempt to assess what mobile augmented and mixed reality could make possible, and what related applications an...

Chin augmentation - slideshow

Science.gov (United States)

... page: //medlineplus.gov/ency/presentations/100009.htm Chin augmentation - series—Normal anatomy To use the sharing features ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

Breast augmentation - slideshow

Science.gov (United States)

... page: //medlineplus.gov/ency/presentations/100205.htm Breast augmentation - series—Normal anatomy To use the sharing features ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

Augmented reality-assisted skull base surgery.

Science.gov (United States)

Cabrilo, I; Sarrafzadeh, A; Bijlenga, P; Landis, B N; Schaller, K

2014-12-01

Neuronavigation is widely considered as a valuable tool during skull base surgery. Advances in neuronavigation technology, with the integration of augmented reality, present advantages over traditional point-based neuronavigation. However, this development has not yet made its way into routine surgical practice, possibly due to a lack of acquaintance with these systems. In this report, we illustrate the usefulness and easy application of augmented reality-based neuronavigation through a case example of a patient with a clivus chordoma. We also demonstrate how augmented reality can help throughout all phases of a skull base procedure, from the verification of neuronavigation accuracy to intraoperative image-guidance. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Enhancing Education through Mobile Augmented Reality

Science.gov (United States)

Joan, D. R. Robert

2015-01-01

In this article, the author has discussed about the Mobile Augmented Reality and enhancing education through it. The aim of the present study was to give some general information about mobile augmented reality which helps to boost education. Purpose of the current study reveals the mobile networks which are used in the institution campus as well…

Augmented Reality as a Countermeasure for Sleep Deprivation.

Science.gov (United States)

Baumeister, James; Dorrlan, Jillian; Banks, Siobhan; Chatburn, Alex; Smith, Ross T; Carskadon, Mary A; Lushington, Kurt; Thomas, Bruce H

2016-04-01

Sleep deprivation is known to have serious deleterious effects on executive functioning and job performance. Augmented reality has an ability to place pertinent information at the fore, guiding visual focus and reducing instructional complexity. This paper presents a study to explore how spatial augmented reality instructions impact procedural task performance on sleep deprived users. The user study was conducted to examine performance on a procedural task at six time points over the course of a night of total sleep deprivation. Tasks were provided either by spatial augmented reality-based projections or on an adjacent monitor. The results indicate that participant errors significantly increased with the monitor condition when sleep deprived. The augmented reality condition exhibited a positive influence with participant errors and completion time having no significant increase when sleep deprived. The results of our study show that spatial augmented reality is an effective sleep deprivation countermeasure under laboratory conditions.

Initial Model of Social Acceptability for Human Augmentation Technologies

NARCIS (Netherlands)

Eghtebas, Chloe; Pay, Yun Suen; Väänänen, Kaisa; Pfeiffer, Ties; Meyer, Joachim; Lukosch, S.G.

2017-01-01

Academia and industry engage in major efforts to develop technologies for augmenting human senses and activities. Many of these technologies, such as augmented reality (AR) and virtual reality (VR) head mounted displays (HMD), haptic augmentation systems, and exoskeletons can be applied in numerous

Media-Augmented Exercise Machines

Science.gov (United States)

Krueger, T.

2002-01-01

Cardio-vascular exercise has been used to mitigate the muscle and cardiac atrophy associated with adaptation to micro-gravity environments. Several hours per day may be required. In confined spaces and long duration missions this kind of exercise is inevitably repetitive and rapidly becomes uninteresting. At the same time, there are pressures to accomplish as much as possible given the cost- per-hour for humans occupying orbiting or interplanetary. Media augmentation provides a the means to overlap activities in time by supplementing the exercise with social, recreational, training or collaborative activities and thereby reducing time pressures. In addition, the machine functions as an interface to a wide range of digital environments allowing for spatial variety in an otherwise confined environment. We hypothesize that the adoption of media augmented exercise machines will have a positive effect on psycho-social well-being on long duration missions. By organizing and supplementing exercise machines, data acquisition hardware, computers and displays into an interacting system this proposal increases functionality with limited additional mass. This paper reviews preliminary work on a project to augment exercise equipment in a manner that addresses these issues and at the same time opens possibilities for additional benefits. A testbed augmented exercise machine uses a specialty built cycle trainer as both input to a virtual environment and as an output device from it using spatialized sound, and visual displays, vibration transducers and variable resistance. The resulting interactivity increases a sense of engagement in the exercise, provides a rich experience of the digital environments. Activities in the virtual environment and accompanying physiological and psychological indicators may be correlated to track and evaluate the health of the crew.

Numerical simulation of fluid flow and heat transfer in a concentric tube heat exchanger

International Nuclear Information System (INIS)

Mokamati, S.V.; Prasad, R.C.

2003-01-01

In this paper, numerical simulation of a concentric tube heat exchanger is presented to determine the convective heat transfer coefficient and friction factor in a smooth tube. Increasing the convective heat transfer coefficient can increase heat transfer rate in a concentric tube heat exchanger from a given tubular surface area. This can be achieved by using heat transfer augmentation devices. This work constitutes the initial phase of the numerical simulation of heat transfer from tubes employing augmentation devices, such as twisted tapes, wire-coil inserts, for heat transfer enhancement. A computational fluid dynamics (CFD) simulation tool was developed with CFX software and the results obtained from the simulations are validated with the empirical correlations for a smooth tube heat exchanger. The difficulties associated with the simulation of a heat exchanger augmented with wire-coil inserts are discussed. (author)

Augmented reality: dé nieuwe dimensie in de sport?

NARCIS (Netherlands)

Slender, Hans

2010-01-01

Volgens trendwatcher Justien Marseille de trend van 2010: augmented reality. Augmented reality is een techniek om met de computer gemaakte beelden toe te voegen aan de realiteit. Het Nederlandse Layar (layar.com) presenteerde zich vorig jaar vol trots als een unieke augmented reality browser, met

Augmented reality services

Directory of Open Access Journals (Sweden)

Tomáš Koubek

2013-01-01

Full Text Available We assume that one of the key reasons is in the difference between a standalone application and a web service. Both architectures have some advantages and disadvantages. The Standalone application (e.g. Nokia/OVI Maps provides the required functionality. From the user point of view, main asset of this “offline” approach is network connectivity independence. However, this kind of applications must be upgraded manually. Moreover, it is hard to get any data about the application usage because it requires additional actions from the user – data are usually acquired through conventional ways, such as email or web forms.The online service such as Google Maps (including its mobile application can offer the same functionality as the offline application. Nevertheless, a permanent connection to provider servers is necessary. This can be taken as a drawback. On the other hand, usage data collection is easier and can be done without the user intervention. The data collection provides a valuable analysis basis of the user habits and needs. This analysis is necessary for design of a complex “user” based solutions such as Google Now.Augmented reality applications are usually based on the first mentioned approach. In this article, we describe our model of augmented reality as a service and compare its features with standalone solutions. Further, other important key aspects for large emergence of augmented reality services in a mainstream market are discussed.

Recent Development of Augmented Reality in Surgery: A Review

Science.gov (United States)

Vávra, P.; Zonča, P.; Ihnát, P.; El-Gendi, A.

2017-01-01

Introduction The development augmented reality devices allow physicians to incorporate data visualization into diagnostic and treatment procedures to improve work efficiency, safety, and cost and to enhance surgical training. However, the awareness of possibilities of augmented reality is generally low. This review evaluates whether augmented reality can presently improve the results of surgical procedures. Methods We performed a review of available literature dating from 2010 to November 2016 by searching PubMed and Scopus using the terms “augmented reality” and “surgery.” Results. The initial search yielded 808 studies. After removing duplicates and including only journal articles, a total of 417 studies were identified. By reading of abstracts, 91 relevant studies were chosen to be included. 11 references were gathered by cross-referencing. A total of 102 studies were included in this review. Conclusions The present literature suggest an increasing interest of surgeons regarding employing augmented reality into surgery leading to improved safety and efficacy of surgical procedures. Many studies showed that the performance of newly devised augmented reality systems is comparable to traditional techniques. However, several problems need to be addressed before augmented reality is implemented into the routine practice. PMID:29065604

Recent Development of Augmented Reality in Surgery: A Review

Directory of Open Access Journals (Sweden)

P. Vávra

2017-01-01

Full Text Available Introduction. The development augmented reality devices allow physicians to incorporate data visualization into diagnostic and treatment procedures to improve work efficiency, safety, and cost and to enhance surgical training. However, the awareness of possibilities of augmented reality is generally low. This review evaluates whether augmented reality can presently improve the results of surgical procedures. Methods. We performed a review of available literature dating from 2010 to November 2016 by searching PubMed and Scopus using the terms “augmented reality” and “surgery.” Results. The initial search yielded 808 studies. After removing duplicates and including only journal articles, a total of 417 studies were identified. By reading of abstracts, 91 relevant studies were chosen to be included. 11 references were gathered by cross-referencing. A total of 102 studies were included in this review. Conclusions. The present literature suggest an increasing interest of surgeons regarding employing augmented reality into surgery leading to improved safety and efficacy of surgical procedures. Many studies showed that the performance of newly devised augmented reality systems is comparable to traditional techniques. However, several problems need to be addressed before augmented reality is implemented into the routine practice.

Age grouping to optimize augmentation success.

Science.gov (United States)

Gordon, Robert W

2010-05-01

This article has described the different age groups that present for noninvasive injectable lip and perioral augmentation, as well as the breakdown of 3 subgroups that present within the 4 general age groups. With the fundamental understanding of these presenting groups and subgroups, the practicing augmenter will be able to better treatment plan and educate the patient on realistic and optimal aesthetic outcomes.

Augmented REality Sandtables (ARESs) Impact on Learning

Science.gov (United States)

2016-07-01

ARL-CR-0803 ● JULY 2016 US Army Research Laboratory Augmented REality Sandtable’s (ARES’s) Impact on Learning by Tarah N......The use of augmented reality (AR) to supplement training tools, specifically sand tables, can produce highly effective systems at relatively low

Virtual and augmented reality for training on maintenance

International Nuclear Information System (INIS)

Gonzalez, F.

2001-01-01

This paper presents two projects focused to support training on maintenance using new technologies. Both projects aims at specifying. designing, developing, and demonstrating prototypes allowing computer guided maintenance of complex mechanical elements using Virtual Reality (VIRMAN) and Augmented Reality (STARMATE) techniques. VIRMAN project is dedicated to training course development on maintenance using Virtual Reality. It based in the animation of three dimension images for component assembly/de-assembly or equipment movements. STARMATE will rely on Augmented Reality techniques which is a growing area in virtual Reality research. The idea of Augmented Reality is to combine a real scene, viewed by the user, with a virtual scene generated by a computer augmenting the reality with additional information. (Author)

Multiple sclerosis influences on the augmentation of serum Klotho concentration

DEFF Research Database (Denmark)

Ahmadi, Mona; Aleagha, Mohammad Sajad Emami; Harirchian, Mohammad Hossein

2016-01-01

We have already shown that the concentration of secreted form of Klotho decreases in the cerebrospinal fluid of patients with relapsing–remitting multiple sclerosis (RRMS). The current study aimed at assessing possible changes in the serum Klotho concentration of MS patients. Participants involved...... 15 new cases of RRMS patients in the relapse phase, 15 RRMS patients who had been suffering from the disease for more than three years and were under regular treatments (interferon beta-1a) and, finally, 15 non-MS patients who constituted the control group. Beside thorough neurological examinations...... to be higher in MS patients when compared to control group. This finding might be attributed to treatment of MS patients with immunomodulatory drugs or a compensatory response to enhance CNS regeneration and/or vitamin D biosynthesis. Further studies are required to elucidate the role of Klotho in MS...

ARVIKA - Augmented Reality in Entwicklung, Produktion und Service: Anbindung eines mobilen Augmented Reality Systems an eine stationäre Infrastruktur. Schlussbericht

OpenAIRE

Wichert, R.; Balfanz, D.

2003-01-01

ARVIKA uses augmented reality (AR) technologies to research and create a user-oriented and system-driven support of operation procedures. It focuses on the development, production, and service of complex technical products and systems. Augmented-reality technologies improve working environments by merging real objects with computer-generated virtual objects to allow for detailed engineering and processing instructions. Augmented reality is a novel approach to the interaction between human and...

Guidelines for user interactions in mobile augmented reality

OpenAIRE

Ortman, Erik; Swedlund, Kenneth

2012-01-01

Over the last couple of years the field of Augmented Reality has transformed from something mainly seen in academic researchinto several examples of big commercially successful products, and the widespread use of highly capable mobile devices has greatly helped accelerate this trend. The powerful sensors in modern handsets enable designers to bring Augmented Reality implementations to the hands ofthe users.This thesis examines how Augmented Reality can be implemented onmobile platforms, mainl...

An experimental test of alternative population augmentation scenarios.

Science.gov (United States)

Kronenberger, John A; Gerberich, Jill C; Fitzpatrick, Sarah W; Broder, E Dale; Angeloni, Lisa M; Funk, W Chris

2018-01-19

Human land use is fragmenting habitats worldwide and inhibiting dispersal among previously connected populations of organisms, often leading to inbreeding depression and reduced evolutionary potential in the face of rapid environmental change. To combat this augmentation of isolated populations with immigrants is sometimes used to facilitate demographic and genetic rescue. Augmentation with immigrants that are genetically and adaptively similar to the target population effectively increases population fitness, but if immigrants are very genetically or adaptively divergent, augmentation can lead to outbreeding depression. Despite well-cited guidelines for the best practice selection of immigrant sources, often only highly divergent populations remain, and experimental tests of these riskier augmentation scenarios are essentially nonexistent. We conducted a mesocosm experiment with Trinidadian guppies (Poecilia reticulata) to test the multigenerational demographic and genetic effects of augmenting 2 target populations with 3 types of divergent immigrants. We found no evidence of demographic rescue, but we did observe genetic rescue in one population. Divergent immigrant treatments tended to maintain greater genetic diversity, abundance, and hybrid fitness than controls that received immigrants from the source used to seed the mesocosms. In the second population, divergent immigrants had a slightly negative effect in one treatment, and the benefits of augmentation were less apparent overall, likely because this population started with higher genetic diversity and a lower reproductive rate that limited genetic admixture. Our results add to a growing consensus that gene flow can increase population fitness even when immigrants are more highly divergent and may help reduce uncertainty about the use of augmentation in conservation. © 2018 Society for Conservation Biology.

Augmented reality for industrial robot programmers: Workload analysis for task-based, augmented reality-supported robot control

OpenAIRE

Stadler, S.; Kain, K.; Giuliani, M.; Mirnig, N.; Stollnberger, G.; Tscheligi, M. ed

2016-01-01

Augmented reality (AR) can serve as a tool to provide helpful information in a direct way to industrial robot programmers throughout the teaching process. It seems obvious that AR support eases the programming process and increases the programmer's productivity and programming accuracy. However, additional information can also potentially increase the programmer's perceived workload. To explore the impact of augmented reality on robot teaching, as a first step we have chosen a Sphero robot co...

Who’s That Girl? Handheld Augmented Reality for Printed Photo Books

OpenAIRE

Henze , Niels; Boll , Susanne

2011-01-01

Part 1: Long and Short Papers; International audience; Augmented reality on mobile phones has recently made major progress. Lightweight, markerless object recognition and tracking makes handheld Augmented Reality feasible for new application domains. As this field is technology driven the interface design has mostly been neglected. In this paper we investigate visualization techniques for augmenting printed documents using handheld Augmented Reality. We selected the augmentation of printed ph...

Towards an interactive medical system by augmented reality

OpenAIRE

Khawla Ben Abderrahim; Mohamed Kallel; M.S. Bouhlel

2013-01-01

Augmented reality is a computer field that progresses rapidly. Its principle is to mix the real world and the virtual world. Many applications already use augmented reality, particularly the medical field. Medical image allows doctors to make diagnosis of the patient. This diagnosis allows him to make the best decision without committing professional mistakes that can cause problems. Hence the idea of integrating augmented reality with medical image analysis to help the doctor to make the bes...

[Display technologies for augmented reality in medical applications].

Science.gov (United States)

Eck, Ulrich; Winkler, Alexander

2018-04-01

One of the main challenges for modern surgery is the effective use of the many available imaging modalities and diagnostic methods. Augmented reality systems can be used in the future to blend patient and planning information into the view of surgeons, which can improve the efficiency and safety of interventions. In this article we present five visualization methods to integrate augmented reality displays into medical procedures and the advantages and disadvantages are explained. Based on an extensive literature review the various existing approaches for integration of augmented reality displays into medical procedures are divided into five categories and the most important research results for each approach are presented. A large number of mixed and augmented reality solutions for medical interventions have been developed as research prototypes; however, only very few systems have been tested on patients. In order to integrate mixed and augmented reality displays into medical practice, highly specialized solutions need to be developed. Such systems must comply with the requirements with respect to accuracy, fidelity, ergonomics and seamless integration into the surgical workflow.

M-Learning and Augmented Reality: A Review of the Scientific Literature on the WoS Repository

Science.gov (United States)

Fombona, Javier; Pascual-Sevillano, Maria-Angeles; González-Videgara, MariCarmen

2017-01-01

Augmented reality emerges as a tool, on which it is necessary to examine its real educational value. This paper shows the results of a bibliometric analysis performed on documents collected from the Web of Science repository, an Internet service that concentrates bibliographic information from more than 7,000 institutions. Our analysis included an…

Determination of student opinions in augmented reality

Directory of Open Access Journals (Sweden)

Huseyin Bicen

2016-11-01

Full Text Available The rapid development of the new technology has changed classroom teaching methods and tools in a positive way. This study investigated the classroom learning with augmented reality and the impact of student opinions. 97 volunteer undergraduate students took part in this study. Results included data in the form of frequencies, percentages and descriptive statistics. The results show that, with gamification methods, augmented reality content affected students’ opinions in a positive way. When QR codes are used in the classroom, students feel independent from classroom materials and can access various resources. Moreover, students think that, when augmented reality in the classroom is used, education is more enjoyable.

Normative Data for Interpreting the BREAST-Q: Augmentation

Science.gov (United States)

Mundy, Lily R.; Homa, Karen; Klassen, Anne F.; Pusic, Andrea L.; Kerrigan, Carolyn L.

2016-01-01

Background The BREAST-Q is a rigorously developed, well-validated, patient-reported outcome (PRO) instrument with a module designed for evaluating breast augmentation outcomes. However, there are no published normative BREAST-Q scores, limiting interpretation. Methods Normative data were generated for the BREAST-Q Augmentation Module via the Army of Women (AOW), an online community of women (with and without breast cancer) engaged in breast-cancer related research. Members were recruited via email, with women 18 years or older without a history of breast cancer or breast surgery invited to participate. Descriptive statistics and a linear multivariate regression were performed. A separate analysis compared normative scores to findings from previously published BREAST-Q augmentation studies. Results The preoperative BREAST-Q Augmentation Module was completed by 1,211 women. Mean age was 54 ±24 years, mean body mass index (BMI) was 27 ±6, and 39% (n=467) had a bra cup size ≥D. Mean scores were Satisfaction with Breasts (54 ±19), Psychosocial Well-being (66 ±20), Sexual Well-being (49 ±20), and Physical Well-being (86 ±15). Women with a BMI of 30 or greater and bra cup size D or greater had lower scores. In comparison to AOW scores, published BREAST-Q augmentation scores were lower before and higher after surgery for all scales except Physical Well-being. Conclusions The AOW normative data represent breast-related satisfaction and well-being in woman not actively seeking breast augmentation. This data may be used as normative comparison values for those seeking and undergoing surgery as we did, demonstrating the value of breast augmentation in this patient population. PMID:28350657

[Association between oxytocin augmentation intervals and the risk of postpartum haemorrhage].

Science.gov (United States)

Loscul, C; Chantry, A-A; Caubit, L; Deneux-Tharaux, C; Goffinet, F; Le Ray, C

2016-09-01

To study the association between the duration of oxytocin augmentation intervals and the risk of postpartum haemorrhage (PPH) among primiparous women in spontaneous labour. Retrospective cohort including primiparous women in spontaneous labour who received oxytocin during labour (n=454). Oxytocin augmentation intervals were dichotomized in intervalsoxytocin augmentation intervals. The association between oxytocin augmentation intervals and PPH was analyzed using univariate and multivariate analysis. Oxytocin augmentation intervals were shorter than 20minutes for 43.8% of the study population. The rate of PPH was higher (9.1% vs 3.5%; P=0.014), and the use of sulprostone was more frequent (6.5% vs 3.5%; P=0.013) if oxytocin augmentation intervals were shorter than 20minutes in comparison with intervals≥20minutes. The association between oxytocin augmentation intervals and PPH remains significant after adjustment on other PPH risk factors (adjusted OR=3.48, 95% CI [1.45-8.34]). The rate of adverse neonatal issue, defined by arterial pH at birth≤7.10 and/or 5minutes score d'Apgar≤7, was higher if oxytocin augmentation intervals wereoxytocin with augmentation intervals shorter than 20minutes. Copyright © 2016. Published by Elsevier Masson SAS.

Spatial augmented reality merging real and virtual worlds

CERN Document Server

Bimber, Oliver

2005-01-01

Like virtual reality, augmented reality is becoming an emerging platform in new application areas for museums, edutainment, home entertainment, research, industry, and the art communities using novel approaches which have taken augmented reality beyond traditional eye-worn or hand-held displays. In this book, the authors discuss spatial augmented reality approaches that exploit optical elements, video projectors, holograms, radio frequency tags, and tracking technology, as well as interactive rendering algorithms and calibration techniques in order to embed synthetic supplements into the real

Facial skeletal augmentation using hydroxyapatite cement.

Science.gov (United States)

Shindo, M L; Costantino, P D; Friedman, C D; Chow, L C

1993-02-01

This study investigates the use of a new calcium phosphate cement, which sets to solid, microporous hydroxyapatite, for facial bone augmentation. In six dogs, the supraorbital ridges were augmented bilaterally with this hydroxyapatite cement. On one side, the hydroxyapatite cement was placed directly onto the bone within a subperiosteal pocket. On the opposite side, the cement was contained within a collagen membrane tubule and then inserted into a subperiosteal pocket. The use of collagen tubules facilitated easy, precise placement of the cement. All implants maintained their original augmented height throughout the duration of the study. They were well tolerated without extrusion or migration, and there was no significant sustained inflammatory response. Histologic studies, performed at 3, 6, and 9 months revealed that when the cement was placed directly onto bone, progressive replacement of the implant by bone (osseointegration of the hydroxyapatite with the underlying bone) without a loss of volume was observed. In contrast, when the cement-collagen tubule combination was inserted, primarily a fibrous union was noted. Despite such fibrous union, the hydroxyapatite-collagen implant solidly bonded to the underlying bone, and no implant resorption was observed. Hydroxyapatite cement can be used successfully for the experimental augmentation of the craniofacial skeleton and may be applicable for such uses in humans.

Novel Augmentation Strategies in Major Depression

DEFF Research Database (Denmark)

Martiny, Klaus

2017-01-01

open psychiatric wards. Only a few patients were re-cruited through advertisements (in the PEMF and Chronos studies). Inclusion criteria Inclusion criteria were major depression according to the DSM-IV, including a depressive episode as part of a bipolar disorder. For the PEMF study, treatment...... The results from the Pindolol study showed that pindolol did not augment the effect of venlafaxine for the whole sample. However, for those patients classified as slow metabolizers, based on their O-desmethylvenlafaxine/venlafaxine ratio (ODV/V), pindolol did augment the antidepressant effect. For patients...... classified as fast metabolizers, pindolol worsened the outcome. This interaction between ODV/V ratio and treatment group was statistically significant (p = 0.01). Results from the PEMF study The results from the PEMF Study showed that treatment with active versus sham PEMF augmented the effect of the ongoing...

Host-symbiont co-speciation and reductive genome evolution in gut symbiotic bacteria of acanthosomatid stinkbugs

Directory of Open Access Journals (Sweden)

Kamagata Yoichi

2009-01-01

Full Text Available Abstract Background Host-symbiont co-speciation and reductive genome evolution have been commonly observed among obligate endocellular insect symbionts, while such examples have rarely been identified among extracellular ones, the only case reported being from gut symbiotic bacteria of stinkbugs of the family Plataspidae. Considering that gut symbiotic communities are vulnerable to invasion of foreign microbes, gut symbiotic associations have been thought to be evolutionarily not stable. Stinkbugs of the family Acanthosomatidae harbor a bacterial symbiont in the midgut crypts, the lumen of which is completely sealed off from the midgut main tract, thereby retaining the symbiont in the isolated cryptic cavities. We investigated histological, ecological, phylogenetic, and genomic aspects of the unique gut symbiosis of the acanthosomatid stinkbugs. Results Phylogenetic analyses showed that the acanthosomatid symbionts constitute a distinct clade in the γ-Proteobacteria, whose sister groups are the obligate endocellular symbionts of aphids Buchnera and the obligate gut symbionts of plataspid stinkbugs Ishikawaella. In addition to the midgut crypts, the symbionts were located in a pair of peculiar lubricating organs associated with the female ovipositor, by which the symbionts are vertically transmitted via egg surface contamination. The symbionts were detected not from ovaries but from deposited eggs, and surface sterilization of eggs resulted in symbiont-free hatchlings. The symbiont-free insects suffered retarded growth, high mortality, and abnormal morphology, suggesting important biological roles of the symbiont for the host insects. The symbiont phylogeny was generally concordant with the host phylogeny, indicating host-symbiont co-speciation over evolutionary time despite the extracellular association. Meanwhile, some local host-symbiont phylogenetic discrepancies were found, suggesting occasional horizontal symbiont transfers across the host

Applying Augmented Reality in practical classes for engineering students

Science.gov (United States)

Bazarov, S. E.; Kholodilin, I. Yu; Nesterov, A. S.; Sokhina, A. V.

2017-10-01

In this article the Augmented Reality application for teaching engineering students of electrical and technological specialties is introduced. In order to increase the motivation for learning and the independence of students, new practical guidelines on Augmented Reality were developed in the application to practical classes. During the application development, the authors used software such as Unity 3D and Vuforia. The Augmented Reality content consists of 3D-models, images and animations, which are superimposed on real objects, helping students to study specific tasks. A user who has a smartphone, a tablet PC, or Augmented Reality glasses can visualize on-screen virtual objects added to a real environment. Having analyzed the current situation in higher education: the learner’s interest in studying, their satisfaction with the educational process, and the impact of the Augmented Reality application on students, a questionnaire was developed and offered to students; the study involved 24 learners.

Sensor-augmented pump therapy at 36 months

DEFF Research Database (Denmark)

Schmidt, Signe; Nørgaard, Kirsten

2012-01-01

This follow-up study investigates the metabolic and psychosocial effects of sensor-augmented pump (SAP) therapy in adults with type 1 diabetes 36 months after therapy start.......This follow-up study investigates the metabolic and psychosocial effects of sensor-augmented pump (SAP) therapy in adults with type 1 diabetes 36 months after therapy start....

Augmented Reality, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Augmented Reality systems come with many benefits derived by co-locating information with a user's environment through the use of one or more output modalities such...

Cosmetic tourism for breast augmentation: a systematic review.

Science.gov (United States)

Brightman, Louise; Ng, Sze; Ahern, Susannah; Cooter, Rodney; Hopper, Ingrid

2017-12-03

The medical tourism industry, and in particular cosmetic tourism for breast augmentation, is becoming an increasingly popular global phenomenon. The objective of this study is to determine the extent of medical literature and the patient risk profiles associated with cosmetic tourism for breast augmentation both locally and abroad. OVID MEDLINE, OVID Embase, Cochrane Central and Proquest electronic databases. The search was conducted through to April 2017. Studies pertaining entirely or partly to cosmetic tourism for breast augmentation were considered for inclusion. Exclusion criteria included non-English articles, studies relating to non-cosmetic or non-implant breast augmentation, and studies that did not separately report on findings associated with breast augmentation abroad. We identified 17 observational studies. Common destinations included Europe, South America and South East Asia. Infectious complications were common. Wound dehiscence and aesthetic dissatisfaction also featured. Catastrophic outcomes such as sepsis, intubation and ventilation, radical bilateral mastectomy, irreversible hypoxic brain injury and death were also reported. There were expectations that home country health systems would treat complications and provide non-medically indicated revision procedures. The burden on home country health systems was evident from a public health perspective. Determining the extent of cosmetic tourism for breast augmentation, including outcomes and complications, will help to inform Australian patients who this seek procedure abroad. Furthermore, it will aid in better understanding the health system implications and may help to guide future research and public health interventions both locally and internationally. © 2017 Royal Australasian College of Surgeons.

Exploration Augmentation Module Project

Data.gov (United States)

National Aeronautics and Space Administration — The Exploration Augmentation Module (EAM) project goal is to design and deliver a flight module that is to be deployed to Earth-Lunar Distant Retrograde Orbit (DRO)....

Intravenous alpha-1 antitrypsin augmentation therapy: systematic review

DEFF Research Database (Denmark)

Gøtzsche, Peter C; Johansen, Helle Krogh

2010-01-01

We reviewed the benefits and harms of augmentation therapy with alpha-1 antitrypsin in patients with alpha-1 antitrypsin deficiency and lung disease. We searched for randomised trials comparing augmentation therapy with placebo or no treatment in PubMed and ClinicalTrials (7 January 2010). Two...... (difference 1.14 g/l; 95% confidence interval 0.14 to 2.14; p = 0.03) over the total course of the trials. Augmentation therapy with alpha-1 antitrypsin cannot be recommended in view of the lack of evidence of clinical benefit and the cost of treatment....

Pemanfaatan Augmented Reality Pada Permainan Othello

Directory of Open Access Journals (Sweden)

Rendy Layman Aguston

2016-11-01

Full Text Available Perkembangan teknologi telah mengubah cara pengerjaan suatu pekerjaan dari cara konvensional menjadi cara yang lebih praktis. Dengan hadirnya teknologi Augmented Reality, cara bermain yang menggunakan pion dan membalikkan pion musuh secara manual menjadi lebih mudah dalam memainkan permainan selain juga dapat berinteraksi langsung. Pembuatan permainan Othello menggunakan program Unity dengan framework Vuforia untuk mewujudkan Augmented Reality pada permainan Othello. Untuk menerapkan Augmented Reality dengan baik, dibutuhkan papan permainan sebagai image target yang sesuai dengan kriteria, jenis kamera yang digunakan, jarak kamera terhadap papan permainan, intensitas cahaya yang ditangkap kamera, serta tingkat sensitivitas tombol virtual. Pada permainan Othello ini tersedia fitur komputer yang menggunakan algoritma Alpha Beta Pruning dengan 3 level kedalaman yang menggunakan perhitungan fungsi evaluasi berupa mobility, potential mobility dan penguasaan corner yang menghasilkan kemenangan mencapai 73,33% dari 15 kali uji coba terhadap aplikasi Othello serupa dan 78,34% dari 37 kali uji coba terhadap user.

Mobile Augmented Note-taking to Support Operating Physical Devices

OpenAIRE

Liu , Can; Diehl , Jonathan; Huot , Stéphane; Borchers , Jan

2011-01-01

Mobile Augmented Reality: Design Issues and Opportunities - 1st Workshop on Mobile Augmented Reality, MobileHCI 2011; In this paper we propose an approach to assist operating physical devices with mobile augmented reality techniques. We propose ideas of interaction techniques, which allow users to put self-authored information as notes onto physical objects. We present the design of two example applications aiming at solving problems from different aspects of physical operations.

Augmented Reality 2.0

Science.gov (United States)

Schmalstieg, Dieter; Langlotz, Tobias; Billinghurst, Mark

Augmented Reality (AR) was first demonstrated in the 1960s, but only recently have technologies emerged that can be used to easily deploy AR applications to many users. Camera-equipped cell phones with significant processing power and graphics abilities provide an inexpensive and versatile platform for AR applications, while the social networking technology of Web 2.0 provides a large-scale infrastructure for collaboratively producing and distributing geo-referenced AR content. This combination of widely used mobile hardware and Web 2.0 software allows the development of a new type of AR platform that can be used on a global scale. In this paper we describe the Augmented Reality 2.0 concept and present existing work on mobile AR and web technologies that could be used to create AR 2.0 applications.

Personalized augmented reality for anatomy education.

Science.gov (United States)

Ma, Meng; Fallavollita, Pascal; Seelbach, Ina; Von Der Heide, Anna Maria; Euler, Ekkehard; Waschke, Jens; Navab, Nassir

2016-05-01

Anatomy education is a challenging but vital element in forming future medical professionals. In this work, a personalized and interactive augmented reality system is developed to facilitate education. This system behaves as a "magic mirror" which allows personalized in-situ visualization of anatomy on the user's body. Real-time volume visualization of a CT dataset creates the illusion that the user can look inside their body. The system comprises a RGB-D sensor as a real-time tracking device to detect the user moving in front of a display. In addition, the magic mirror system shows text information, medical images, and 3D models of organs that the user can interact with. Through the participation of 7 clinicians and 72 students, two user studies were designed to respectively assess the precision and acceptability of the magic mirror system for education. The results of the first study demonstrated that the average precision of the augmented reality overlay on the user body was 0.96 cm, while the results of the second study indicate 86.1% approval for the educational value of the magic mirror, and 91.7% approval for the augmented reality capability of displaying organs in three dimensions. The usefulness of this unique type of personalized augmented reality technology has been demonstrated in this paper. © 2015 Wiley Periodicals, Inc.

Augmented reality based real-time subcutaneous vein imaging system.

Science.gov (United States)

Ai, Danni; Yang, Jian; Fan, Jingfan; Zhao, Yitian; Song, Xianzheng; Shen, Jianbing; Shao, Ling; Wang, Yongtian

2016-07-01

A novel 3D reconstruction and fast imaging system for subcutaneous veins by augmented reality is presented. The study was performed to reduce the failure rate and time required in intravenous injection by providing augmented vein structures that back-project superimposed veins on the skin surface of the hand. Images of the subcutaneous vein are captured by two industrial cameras with extra reflective near-infrared lights. The veins are then segmented by a multiple-feature clustering method. Vein structures captured by the two cameras are matched and reconstructed based on the epipolar constraint and homographic property. The skin surface is reconstructed by active structured light with spatial encoding values and fusion displayed with the reconstructed vein. The vein and skin surface are both reconstructed in the 3D space. Results show that the structures can be precisely back-projected to the back of the hand for further augmented display and visualization. The overall system performance is evaluated in terms of vein segmentation, accuracy of vein matching, feature points distance error, duration times, accuracy of skin reconstruction, and augmented display. All experiments are validated with sets of real vein data. The imaging and augmented system produces good imaging and augmented reality results with high speed.

Virtual, augmented reality and serious games for healthcare

CERN Document Server

Jain, Lakhmi; Anderson, Paul

2014-01-01

There is a tremendous interest among researchers for the development of virtual, augmented reality and games technologies due to their widespread applications in medicine and healthcare. To date the major applications of these technologies include medical simulation, telemedicine, medical and healthcare training, pain control, visualisation aid for surgery, rehabilitation in cases such as stroke, phobia, and trauma therapies. Many recent studies have identified the benefits of using Virtual Reality, Augmented Reality, or serious games in a variety of medical applications.   This research volume on Virtual, Augmented Reality and Serious Games for Healthcare 1 offers an insightful introduction to the theories, development and applications of virtual, augmented reality and digital games technologies in medical and clinical settings and healthcare in general. It is divided into six sections: section one presents a selection of applications in medical education and healthcare management; Section two relates to th...

An Integrative Introduction to Human Augmentation Science

OpenAIRE

Alicea, Bradly

2018-01-01

Human Augmentation (HA) spans several technical fields and methodological approaches, including Experimental Psychology, Human-Computer Interaction, Psychophysiology, and Artificial Intelligence. Augmentation involves various strategies for optimizing and controlling cognitive states, which requires an understanding of biological plasticity, dynamic cognitive processes, and models of adaptive systems. As an instructive lesson, we will explore a few HA-related concepts and outstanding issues. ...

Medical imaging and augmented reality. Proceedings

International Nuclear Information System (INIS)

Dohi, Takeyoshi; Sakuma, Ichiro; Liao, Hongen

2008-01-01

This book constitutes the refereed proceedings of the 4th International Workshop on Medical Imaging and Augmented Reality, MIAR 2008, held in Tokyo, Japan, in August 2008. The 44 revised full papers presented together with 3 invited papers were carefully reviewed and selected from 90 submissions. The papers are organized in topical sections on surgical planning and simulation, medical image computing, image analysis, shape modeling and morphometry, image-guided robotics, image-guided intervention, interventional imaging, image registration, augmented reality, and image segmentation. (orig.)

Medical imaging and augmented reality. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Dohi, Takeyoshi [Tokyo Univ. (Japan). Dept. of Mechano-Informatics; Sakuma, Ichiro [Tokyo Univ. (Japan). Dept. of Precision Engineering; Liao, Hongen (eds.) [Tokyo Univ. (Japan). Dept. of Bioengineering

2008-07-01

This book constitutes the refereed proceedings of the 4th International Workshop on Medical Imaging and Augmented Reality, MIAR 2008, held in Tokyo, Japan, in August 2008. The 44 revised full papers presented together with 3 invited papers were carefully reviewed and selected from 90 submissions. The papers are organized in topical sections on surgical planning and simulation, medical image computing, image analysis, shape modeling and morphometry, image-guided robotics, image-guided intervention, interventional imaging, image registration, augmented reality, and image segmentation. (orig.)

Cognitive Cost of Using Augmented Reality Displays.

Science.gov (United States)

Baumeister, James; Ssin, Seung Youb; ElSayed, Neven A M; Dorrian, Jillian; Webb, David P; Walsh, James A; Simon, Timothy M; Irlitti, Andrew; Smith, Ross T; Kohler, Mark; Thomas, Bruce H

2017-11-01

This paper presents the results of two cognitive load studies comparing three augmented reality display technologies: spatial augmented reality, the optical see-through Microsoft HoloLens, and the video see-through Samsung Gear VR. In particular, the two experiments focused on isolating the cognitive load cost of receiving instructions for a button-pressing procedural task. The studies employed a self-assessment cognitive load methodology, as well as an additional dual-task cognitive load methodology. The results showed that spatial augmented reality led to increased performance and reduced cognitive load. Additionally, it was discovered that a limited field of view can introduce increased cognitive load requirements. The findings suggest that some of the inherent restrictions of head-mounted displays materialize as increased user cognitive load.

Adaptive multimodal interaction in mobile augmented reality: A conceptual framework

Science.gov (United States)

Abidin, Rimaniza Zainal; Arshad, Haslina; Shukri, Saidatul A'isyah Ahmad

2017-10-01

Recently, Augmented Reality (AR) is an emerging technology in many mobile applications. Mobile AR was defined as a medium for displaying information merged with the real world environment mapped with augmented reality surrounding in a single view. There are four main types of mobile augmented reality interfaces and one of them are multimodal interfaces. Multimodal interface processes two or more combined user input modes (such as speech, pen, touch, manual gesture, gaze, and head and body movements) in a coordinated manner with multimedia system output. In multimodal interface, many frameworks have been proposed to guide the designer to develop a multimodal applications including in augmented reality environment but there has been little work reviewing the framework of adaptive multimodal interface in mobile augmented reality. The main goal of this study is to propose a conceptual framework to illustrate the adaptive multimodal interface in mobile augmented reality. We reviewed several frameworks that have been proposed in the field of multimodal interfaces, adaptive interface and augmented reality. We analyzed the components in the previous frameworks and measure which can be applied in mobile devices. Our framework can be used as a guide for designers and developer to develop a mobile AR application with an adaptive multimodal interfaces.

A Systematic Review of Pliance, Tracking, and Augmenting

NARCIS (Netherlands)

Kissi, Ama; Hughes, Sean; Mertens, Gaëtan; Barnes-Holmes, Dermot; De Houwer, Jan; Crombez, Geert

Within relational frame theory, a distinction has been made between three types of rule-governed behavior known as pliance, tracking, and augmenting. This review examined whether there is support for the concepts of pliance, tracking, and augmenting in the experimental analysis of behavior; whether

Introduction to Mobile Augmented Reality Development in Unity

Directory of Open Access Journals (Sweden)

Jacob W. Greene

2016-07-01

Full Text Available This lesson serves as an introduction to creating mobile augmented reality applications. Augmented reality (AR can be defined as the overlaying of digital content (images, video, text, sound, etc. onto physical objects or locations, and it is typically experienced by looking through the camera lens of an electronic device such as a smartphone, tablet, or optical head-mounted display (e.g. Microsoft Hololens. Although AR is a cutting-edge, complex technology, there are a number of user-friendly platforms that allow people with no previous coding experience to create compelling augmented reality experiences.

Gunner Goggles: Implementing Augmented Reality into Medical Education.

Science.gov (United States)

Wang, Leo L; Wu, Hao-Hua; Bilici, Nadir; Tenney-Soeiro, Rebecca

2016-01-01

There is evidence that both smartphone and tablet integration into medical education has been lacking. At the same time, there is a niche for augmented reality (AR) to improve this process through the enhancement of textbook learning. Gunner Goggles is an attempt to enhance textbook learning in shelf exam preparatory review with augmented reality. Here we describe our initial prototype and detail the process by which augmented reality was implemented into our textbook through Layar. We describe the unique functionalities of our textbook pages upon augmented reality implementation, which includes links, videos and 3D figures, and surveyed 24 third year medical students for their impression of the technology. Upon demonstrating an initial prototype textbook chapter, 100% (24/24) of students felt that augmented reality improved the quality of our textbook chapter as a learning tool. Of these students, 92% (22/24) agreed that their shelf exam review was inadequate and 19/24 (79%) felt that a completed Gunner Goggles product would have been a viable alternative to their shelf exam review. Thus, while students report interest in the integration of AR into medical education test prep, future investigation into how the use of AR can improve performance on exams is warranted.

MMP-9 Serum Levels in Schizophrenic Patients during Treatment Augmentation with Sarcosine (Results of the PULSAR Study

Directory of Open Access Journals (Sweden)

Dominik Strzelecki

2016-07-01

Full Text Available Aim: Find changes in matrix metallopeptidase-9 (MMP-9 levels during augmentation of antipsychotic treatment with sarcosine and a relationship between schizophrenia symptoms severity and initial level of MMP-9. Method: Fifty-eight patients with diagnosis of schizophrenia with predominant negative symptoms participated in a six-month prospective RCT (randomized controlled trial. The patients received two grams of sarcosine (n = 28 or placebo (n = 30 daily. At the beginning, after six weeks and after six months MMP-9 levels were measured. Severity of symptomatology was assessed with the Positive and Negative Syndrome Scale (PANSS and Calgary Depression Scale for Schizophrenia (CDSS. Results: MMP-9 serum levels were stable after six weeks and six months in both groups. We noted improvement in negative symptoms, general psychopathology and total PANSS score in sarcosine group compared to placebo; however, there was no correlations between serum MMP-9 concentrations and PANSS scores in all assessments. Initial serum MMP-9 concentrations cannot be used as an improvement predictor acquired during sarcosine augmentation. Conclusions: Our results indicate that either MMP-9 is not involved in the N-methyl-d-aspartate (NMDA-dependent mechanism of sarcosine action in terms of clinical parameters or sarcosine induced changes in peripheral MMP-9 concentrations cannot be detected in blood assessments.

MMP-9 Serum Levels in Schizophrenic Patients during Treatment Augmentation with Sarcosine (Results of the PULSAR Study).

Science.gov (United States)

Strzelecki, Dominik; Kałużyńska, Olga; Szyburska, Justyna; Wysokiński, Adam

2016-07-09

Find changes in matrix metallopeptidase-9 (MMP-9) levels during augmentation of antipsychotic treatment with sarcosine and a relationship between schizophrenia symptoms severity and initial level of MMP-9. Fifty-eight patients with diagnosis of schizophrenia with predominant negative symptoms participated in a six-month prospective RCT (randomized controlled trial). The patients received two grams of sarcosine (n = 28) or placebo (n = 30) daily. At the beginning, after six weeks and after six months MMP-9 levels were measured. Severity of symptomatology was assessed with the Positive and Negative Syndrome Scale (PANSS) and Calgary Depression Scale for Schizophrenia (CDSS). MMP-9 serum levels were stable after six weeks and six months in both groups. We noted improvement in negative symptoms, general psychopathology and total PANSS score in sarcosine group compared to placebo; however, there was no correlations between serum MMP-9 concentrations and PANSS scores in all assessments. Initial serum MMP-9 concentrations cannot be used as an improvement predictor acquired during sarcosine augmentation. Our results indicate that either MMP-9 is not involved in the N-methyl-d-aspartate (NMDA)-dependent mechanism of sarcosine action in terms of clinical parameters or sarcosine induced changes in peripheral MMP-9 concentrations cannot be detected in blood assessments.

Augmentative biological control of arthropods in Latin America

NARCIS (Netherlands)

Lenteren, van J.C.; Bueno, V.H.P.

2003-01-01

Augmentative forms of biological control, where natural enemies are periodically introduced, are applied over large areas in various cropping systems in Latin America. About 25% of the world area under augmentative control is situated in this region. Well-known examples are the use of species of the

Augmented reality mobile application for overlaying images on textiles

OpenAIRE

Brinza, Veronica

2016-01-01

Augmented reality is one the relatively new and fast growing branches in modern informatics. It incorporates in simple people lives on a lot of different levels. It can be used everywhere starting from the simple checking of your email and ending up with a complex augmented reality video games or augmented reality learning. From the ancient times actors tried to immerse the spectators in world of the performance using decoration and costumed. In XVIII – XIX centuries pictures w...

Augmented reality tools and learning practice in mobile-learning

OpenAIRE

Figueiredo, Mauro; Gomes, José; Gomes, Cristina; Lopes, João

2014-01-01

There are many augmented reality (AR) applications available that can be used to create educational contents for these mobile devices. This paper surveys the most popular augmented reality applications and we select AR eco-systems to be used in daily teaching activities which are user friendly, do not require programming skills and are free. Different augmented reality technologies are explored in this paper to create teaching activities with animations, videos and other information to be sho...

Augmented reality aiding collimator exchange at the LHC

International Nuclear Information System (INIS)

Martínez, Héctor; Fabry, Thomas; Laukkanen, Seppo; Mattila, Jouni; Tabourot, Laurent

2014-01-01

Novel Augmented Reality techniques have the potential to have a large positive impact on the way remote maintenance operations are carried out in hazardous areas, e.g. areas where radiation doses that imply careful planning and optimization of maintenance operations are present. This paper describes an Augmented Reality strategy, system and implementation for aiding the remote collimator exchange in the LHC, currently the world's largest and highest-energy particle accelerator. The proposed system relies on marker detection and multi-modal augmentation in real-time. A database system has been used to ensure flexibility. The system has been tested in a mock-up facility, showing real time performance and great potential for future use in the LHC. The technical-scientific difficulties identified during the development of the system and the proposed solutions described in this paper may help the development of future Augmented Reality systems for remote handling in scientific facilities

Augmented reality aiding collimator exchange at the LHC

Energy Technology Data Exchange (ETDEWEB)

Martínez, Héctor, E-mail: hector.martinez@sensetrix.com [SenseTrix, PL 20 FI-00101 Helsinki (Finland); Fabry, Thomas [European Organization for Nuclear Research, CERN, CH-1211 Genève 23 (Switzerland); Laukkanen, Seppo [SenseTrix, PL 20 FI-00101 Helsinki (Finland); Mattila, Jouni [Tampere University of Technology, PO Box 527, FI-33101 Tampere (Finland); Tabourot, Laurent [SYMME, Université de Savoie, Polytech Annecy-Chambéry, 5 chemin de Bellevue, 74944 Annecy le Vieux (France)

2014-11-01

Novel Augmented Reality techniques have the potential to have a large positive impact on the way remote maintenance operations are carried out in hazardous areas, e.g. areas where radiation doses that imply careful planning and optimization of maintenance operations are present. This paper describes an Augmented Reality strategy, system and implementation for aiding the remote collimator exchange in the LHC, currently the world's largest and highest-energy particle accelerator. The proposed system relies on marker detection and multi-modal augmentation in real-time. A database system has been used to ensure flexibility. The system has been tested in a mock-up facility, showing real time performance and great potential for future use in the LHC. The technical-scientific difficulties identified during the development of the system and the proposed solutions described in this paper may help the development of future Augmented Reality systems for remote handling in scientific facilities.

Transaxillary Endoscopic Breast Augmentation

Directory of Open Access Journals (Sweden)

Hyung-Bo Sim

2014-09-01

Full Text Available The axillary technique is the most popular approach to breast augmentation among Korean women. Transaxillary breast augmentation is now conducted with sharp electrocautery dissection under direct endoscopic vision throughout the entire process. The aims of this method are clear: both a bloodless pocket and a sharp non-traumatic dissection. Round textured or anatomical cohesive gel implants have been used to make predictable well-defined inframammary creases because textured surface implants demonstrated a better stability attributable to tissue adherence compared with smooth surface implants. The axillary endoscopic technique has greatly evolved, and now the surgical results are comparable to those with the inframammary approach. The author feels that this technique is an excellent choice for young patients with an indistinct or absent inframammary fold, who do not want a scar in the aesthetic unit of their chest.

Transforming Polar Research with Google Glass Augmented Reality (Invited)

Science.gov (United States)

Ruthkoski, T.

2013-12-01

Augmented reality is a new technology with the potential to accelerate the advancement of science, particularly in geophysical research. Augmented reality is defined as a live, direct or indirect, view of a physical, real-world environment whose elements are augmented (or supplemented) by computer-generated sensory input such as sound, video, graphics or GPS data. When paired with advanced computing techniques on cloud resources, augmented reality has the potential to improve data collection techniques, visualizations, as well as in-situ analysis for many areas of research. Google is currently a pioneer of augmented reality technology and has released beta versions of their wearable computing device, Google Glass, to a select number of developers and beta testers. This community of 'Glass Explorers' is the vehicle from which Google shapes the future of their augmented reality device. Example applications of Google Glass in geophysical research range from use as a data gathering interface in harsh climates to an on-site visualization and analysis tool. Early participation in the shaping of the Google Glass device is an opportunity for researchers to tailor this new technology to their specific needs. The purpose of this presentation is to provide geophysical researchers with a hands-on first look at Google Glass and its potential as a scientific tool. Attendees will be given an overview of the technical specifications as well as a live demonstration of the device. Potential applications to geophysical research in polar regions will be the primary focus. The presentation will conclude with an open call to participate, during which attendees may indicate interest in developing projects that integrate Google Glass into their research. Application Mockup: Penguin Counter Google Glass Augmented Reality Device

Maxillary Sinus Floor Augmentation

DEFF Research Database (Denmark)

Starch-Jensen, Thomas; Jensen, Janek Dalsgaard

2017-01-01

, radiological and histomorphometric outcome as well as complications are presented after maxillary sinus floor augmentation applying the lateral window technique with a graft material, maxillary sinus membrane elevation without a graft material and osteotome-mediated sinus floor elevation with or without...

Towards Wearable Gaze Supported Augmented Cognition

DEFF Research Database (Denmark)

Toshiaki Kurauchi, Andrew; Hitoshi Morimoto, Carlos; Mardanbeigi, Diako

Augmented cognition applications must deal with the problem of how to exhibit information in an orderly, understandable, and timely fashion. Though context have been suggested to control the kind, amount, and timing of the information delivered, we argue that gaze can be a fundamental tool...... by the wearable computing community to develop a gaze supported augmented cognition application with three interaction modes. The application provides information of the person being looked at. The continuous mode updates information every time the user looks at a different face. The key activated discrete mode...

Superconducting augmented rail gun (SARG)

International Nuclear Information System (INIS)

Homan, C.G.; Cummings, C.E.; Fowler, C.M.

1986-01-01

Superconducting augmentation consists of a superconducting coil operating in the persistent mode closely coupled magnetically with a normally conducting rail gun. A theoretical investigation of the effect of this system on a rail gun has shown that two benefits occur. Projectile velocities and launch efficiencies increase significantly depending on the magnetic coupling between the rail and augmentation circuits. Previous work evaluated an idealized system by neglecting energy dissipation effects. In this paper, the authors extend the analysis to include the neglected terms and show improved actual launch efficiencies for the SARG configuration. In this paper, the authors discuss details of projectile design in depth and present preliminary results of rail gun performance

The Local Games Lab ABQ: Homegrown Augmented Reality

Science.gov (United States)

Holden, Christopher

2014-01-01

Experiments in the use of augmented reality games formerly required extensive material resources and expertise to implement above and beyond what might be possible within the usual educational contexts. Currently, the more common availability of hardware in these contexts and the existence of easy-to-use, general purpose augmented reality design…

Complications 15 years after breast augmentation with polyacrylamide

Directory of Open Access Journals (Sweden)

Habib M. Ghasemi

2015-06-01

Full Text Available Polyacrylamide hydrogel (PAAG has been used as an injectable, permanent filler for soft-tissue augmentation for more than two decades. Several complications have been reported worldwide. In this case report, we present a woman with long-term complications 15 years after bilateral breast augmentation with PAAG injections.

Pose estimation for mobile devices and augmented reality

NARCIS (Netherlands)

Caarls, J.

2009-01-01

In this thesis we introduce the reader to the field of Augmented Reality (AR) and describe aspects of an AR system. We show the current uses in treatment of phobias, games, sports and industry. We present the challenges for Optical See-Through Augmented Reality in which the real world is perceived

PENGGUNAAN AUGMENTED REALITY UNTUK MENSIMULASIKAN DEKORASI RUANGAN SECARA REAL TIME

Directory of Open Access Journals (Sweden)

Ulva Erida Nur Rochmah

2016-12-01

Full Text Available Abstrak Mendekorasi ruangan merupakan kegiatan  yang memakan banyak waktu dan tenaga, terutama jika objek yang digunakan besar dan berat. Akan merepotkan jika seseorang harus menggeser setiap objek untuk menentukan letak yang sesuai. Hal ini dapat dihindari dengan menggunakan aplikasi berbasis Augmented Reality. Augmented Reality merupakan sebuah teknologi untuk menggabungkan dunia nyata dan dunia virtual dengan cara menampilkan objek-objek virtual di dunia nyata secara real time. Tujuan utama dari penelitian ini adalah untuk menciptakan suatu aplikasi Android dengan menggunakan Augmented Reality yang dapat digunakan untuk menggantikan objek nyata dengan objek virtual 3D sehingga memudahkan pengguna dalam mensimulasikan dekorasi ruangan. Aplikasi ini bekerja dengan cara memindai marker yang sudah dicetak pada selembar kertas. Jika marker telah terdeteksi, objek 3D berupa perabot akan ditampilkan di kamera aplikasi. Pengguna dapat memindah lokasi, memutar, dan mengubah ukuran objek untuk mensimulasikan tata letak ruangan. Hasil penelitian ini adalah aplikasi Android berbasis Augmented Reality yang dapat digunakan untuk mensimulasikan dekorasi ruangan secara real time. Kata Kunci: augmented reality, dekorasi, interior, marker Abstract Decorating the room is an activity that takes a lot of time and effort, especially if the object is large and heavy. It would be inconvenient if someone has to drag each object to determine the appropriate location. This problem can be avoided using an Augmented Reality-based application. Augmented reality is a technology that combine the real world and the virtual world by displaying virtual object in real world. The main purpose of this research is to create an Android application using Augmented reality  that can be used to replace the real object with virtual 3D object, making it easier for the user to simulate the decoration of the room. This application works by scanning the marker that has been printed on a

Drone-Augmented Human Vision: Exocentric Control for Drones Exploring Hidden Areas.

Science.gov (United States)

Erat, Okan; Isop, Werner Alexander; Kalkofen, Denis; Schmalstieg, Dieter

2018-04-01

Drones allow exploring dangerous or impassable areas safely from a distant point of view. However, flight control from an egocentric view in narrow or constrained environments can be challenging. Arguably, an exocentric view would afford a better overview and, thus, more intuitive flight control of the drone. Unfortunately, such an exocentric view is unavailable when exploring indoor environments. This paper investigates the potential of drone-augmented human vision, i.e., of exploring the environment and controlling the drone indirectly from an exocentric viewpoint. If used with a see-through display, this approach can simulate X-ray vision to provide a natural view into an otherwise occluded environment. The user's view is synthesized from a three-dimensional reconstruction of the indoor environment using image-based rendering. This user interface is designed to reduce the cognitive load of the drone's flight control. The user can concentrate on the exploration of the inaccessible space, while flight control is largely delegated to the drone's autopilot system. We assess our system with a first experiment showing how drone-augmented human vision supports spatial understanding and improves natural interaction with the drone.

Mean centering of ratio spectra and concentration augmented classical least squares in a comparative approach for quantitation of spectrally overlapped bands of antihypertensives in formulations

Science.gov (United States)

Hegazy, Maha Abdel Monem; Fayez, Yasmin Mohammed

2015-04-01

Two different methods manipulating spectrophotometric data have been developed, validated and compared. One is capable of removing the signal of any interfering components at the selected wavelength of the component of interest (univariate). The other includes more variables and extracts maximum information to determine the component of interest in the presence of other components (multivariate). The applied methods are smart, simple, accurate, sensitive, precise and capable of determination of spectrally overlapped antihypertensives; hydrochlorothiazide (HCT), irbesartan (IRB) and candesartan (CAN). Mean centering of ratio spectra (MCR) and concentration residual augmented classical least-squares method (CRACLS) were developed and their efficiency was compared. CRACLS is a simple method that is capable of extracting the pure spectral profiles of each component in a mixture. Correlation was calculated between the estimated and pure spectra and was found to be 0.9998, 0.9987 and 0.9992 for HCT, IRB and CAN, respectively. The methods were successfully determined the three components in bulk powder, laboratory-prepared mixtures, and combined dosage forms. The results obtained were compared statistically with each other and to those of the official methods.

Augmented reality

OpenAIRE

Jecha, Jakub

2011-01-01

This thesis is focused on a technology called Augmented reality, especially on its use in marketing. The main objective of the thesis is to define why this technology is a suitable tool for marketing and to assess its use in real conditions. This is achieved by defining specific devices and use cases of this technology in practice, whereas evaluation of its use in real enviroment is based on statistics. The contribution of the thesis is objective evaluation of this technology and provision of...

Augmenting a Child's Reality: Using Educational Tablet Technology

Science.gov (United States)

Tanner, Patricia; Karas, Carly; Schofield, Damian

2014-01-01

This study investigates the classroom integration of an innovative technology, augmented reality. Although the process of adding new technologies into a classroom setting can be daunting, the concept of augmented reality has demonstrated the ability to educate students and to assist with their comprehension of a procedural task. One half of the…

A Determinate Model of Thrust-Augmenting Ejectors

Science.gov (United States)

Whitley, N.; Krothapalli, A.; van Dommelen, L.

1996-01-01

A theoretical analysis of the compressible flow through a constant-area jet-engine ejector in which a primary jet mixes with ambient fluid from a uniform free stream is pursued. The problem is reduced to a determinate mathematical one by prescribing the ratios of stagnation properties between the primary and secondary flows. For some selections of properties and parameters more than one solution is possible and the meaning of these solutions is discussed by means of asymptotic expansions. Our results further show that while under stationary conditions the thrust-augmentation ratio assumes a value of 2 in the large area-ratio limit, for a free-stream Mach number greater than 0.6 very little thrust augmentation is left. Due to the assumptions made, the analysis provides idealized values for the thrust-augmentation ratio and the mass flux entrainment factor.

Augmented spaces, a look beyond advertising

Directory of Open Access Journals (Sweden)

Oana Andreea Căplescu

2014-03-01

Full Text Available From billboards to urban screens and now to media facades, the augmentation of our cities has expanded, changing social behaviours and public space consumption. Smart buildings are being developed and, much like the smartphones, these hybrids are not only in sci-fi movies anymore. One of the main promoters of media facades and media architecture has been the advertising industry. But artists and designers showed the potential of different approaches, experimenting with digitally augmented spaces both indoors and outdoors. Going beyond the commercial aspect of being an advertising and branding tool, these hybrids offer a variety of uses. Questions of how and where we use them and how they can improve our life quality are discussed here emphasizing that we developed a media behaviour, adjusting our relation to the physical and information environments. I examine some of the most notable experiments outside of the advertising sphere, offering a base for future development of augmented spaces and opening the discussion over the language of new media architecture.

Dermal fillers for facial soft tissue augmentation.

Science.gov (United States)

Dastoor, Sarosh F; Misch, Carl E; Wang, Hom-Lay

2007-01-01

Nowadays, patients are demanding not only enhancement to their dental (micro) esthetics, but also their overall facial (macro) esthetics. Soft tissue augmentation via dermal filling agents may be used to correct facial defects such as wrinkles caused by age, gravity, and trauma; thin lips; asymmetrical facial appearances; buccal fold depressions; and others. This article will review the pathogenesis of facial wrinkles, history, techniques, materials, complications, and clinical controversies regarding dermal fillers for soft tissue augmentation.

Integrating Hypermedia Techniques with Augmented Reality Environments

OpenAIRE

Sinclair, Patrick

2004-01-01

Augmented Reality systems, which overlay virtual information over the real world, can benefit greatly from the techniques established by the Open Hypermedia research field. Storing information and links separately from a document can be advantageous for augmented reality applications and can enable the adaption of content to suit users’ preferences. This thesis explores how Open Hypermedia systems might be used as the information systems behind AR environments. This provides benefits to augme...

Potential Use of Augmented Reality in LIS Education

Science.gov (United States)

Wójcik, Magdalena

2016-01-01

The subject of this article is the use of augmented reality technology in library and information science education. The aim is to determine the scope and potential uses of augmented reality in the education of information professionals. In order to determine the scope and forms of potential use of AR technology in LIS education a two-step…

Augmented Reality, the Future of Contextual Mobile Learning

Science.gov (United States)

Sungkur, Roopesh Kevin; Panchoo, Akshay; Bhoyroo, Nitisha Kirtee

2016-01-01

Purpose: This study aims to show the relevance of augmented reality (AR) in mobile learning for the 21st century. With AR, any real-world environment can be augmented by providing users with accurate digital overlays. AR is a promising technology that has the potential to encourage learners to explore learning materials from a totally new…

Composite augmentation phalloplasty: personal experience after 275 patients

Directory of Open Access Journals (Sweden)

Juan Monreal

2015-03-01

Full Text Available Aim: To report the author's experience in augmentation phalloplasty by studying a retrospective series of patients who underwent fat grafting for girth enhancement or a composite technique based on suspensory ligament release plus fat grafting performed simultaneously. Methods: The author analyzed retrospectively the outcomes of 275 augmentation phalloplasty procedures performed in 259 patients until November 2013. Of these, 127 correspond to girth augmentation with fat grafting and 148 to composite augmentation phalloplasty (girth augmentation with fat grafting and length improvement by suspensory ligament release. In 16 patients girth and length enhancement were performed in two separate procedures. Results: Of this 259 patients, 87 underwent postoperative follow-up for at least 12 months and 160 patients underwent follow-up for at least 6 months. The average increase in circumference at 6 months was 1.7 cm (1.57 cm at 12 months and the average increase in length of 3.2 cm (3.1 cm at 12 months. Twenty-two patients showed minor complications that were treated without sequelae and without influencing the final result. Conclusion: By judicious use of currently available techniques, it is possible to achieve stable increases in penis size. The use of composite techniques provides better final results than the use of individual techniques performed alone due to the increase of the actual volume of the penis. An adequate informed consent is essential in all patients due to the unrealistic expectations expressed by the majority of them.

Breaking the Barriers to True Augmented Reality

OpenAIRE

Sandor, Christian; Fuchs, Martin; Cassinelli, Alvaro; Li, Hao; Newcombe, Richard; Yamamoto, Goshiro; Feiner, Steven

2015-01-01

In recent years, Augmented Reality (AR) and Virtual Reality (VR) have gained considerable commercial traction, with Facebook acquiring Oculus VR for \\$2 billion, Magic Leap attracting more than \\$500 million of funding, and Microsoft announcing their HoloLens head-worn computer. Where is humanity headed: a brave new dystopia-or a paradise come true? In this article, we present discussions, which started at the symposium "Making Augmented Reality Real", held at Nara Institute of Science and Te...

Thrust augmentation for a small turbojet engine

OpenAIRE

Hackaday, Gary L.

1999-01-01

Approved for public release; distribution is unlimited A Sophia J450 (nine pounds of thrust) gas turbine engine was used first to examine the thrust augmentation generated using an ejector shroud. Experimental results obtained with and without the ejector were compared with performance predicted using an engine code and a one-dimensional ejector analysis. The engine code was revised to incorporate a radial turbine and the correct compressor map. Thrust augmentation of 3-10% was measured an...

Whey protein hydrolysate augments tendon and muscle hypertrophy independent of resistance exercise contraction mode

DEFF Research Database (Denmark)

Farup, Jean; Rahbek, S K; Vendelbo, M H

2014-01-01

In a comparative study, we investigated the effects of maximal eccentric or concentric resistance training combined with whey protein or placebo on muscle and tendon hypertrophy. 22 subjects were allocated into either a high-leucine whey protein hydrolysate + carbohydrate group (WHD) or a carbohy......In a comparative study, we investigated the effects of maximal eccentric or concentric resistance training combined with whey protein or placebo on muscle and tendon hypertrophy. 22 subjects were allocated into either a high-leucine whey protein hydrolysate + carbohydrate group (WHD...... or contraction mode effects. In conclusion, high-leucine whey protein hydrolysate augments muscle and tendon hypertrophy following 12 weeks of resistance training – irrespective of contraction mode....

Handling Occlusions for Robust Augmented Reality Systems

Directory of Open Access Journals (Sweden)

Maidi Madjid

2010-01-01

Full Text Available Abstract In Augmented Reality applications, the human perception is enhanced with computer-generated graphics. These graphics must be exactly registered to real objects in the scene and this requires an effective Augmented Reality system to track the user's viewpoint. In this paper, a robust tracking algorithm based on coded fiducials is presented. Square targets are identified and pose parameters are computed using a hybrid approach based on a direct method combined with the Kalman filter. An important factor for providing a robust Augmented Reality system is the correct handling of targets occlusions by real scene elements. To overcome tracking failure due to occlusions, we extend our method using an optical flow approach to track visible points and maintain virtual graphics overlaying when targets are not identified. Our proposed real-time algorithm is tested with different camera viewpoints under various image conditions and shows to be accurate and robust.

Augmented Reality Imaging System: 3D Viewing of a Breast Cancer.

Science.gov (United States)

Douglas, David B; Boone, John M; Petricoin, Emanuel; Liotta, Lance; Wilson, Eugene

2016-01-01

To display images of breast cancer from a dedicated breast CT using Depth 3-Dimensional (D3D) augmented reality. A case of breast cancer imaged using contrast-enhanced breast CT (Computed Tomography) was viewed with the augmented reality imaging, which uses a head display unit (HDU) and joystick control interface. The augmented reality system demonstrated 3D viewing of the breast mass with head position tracking, stereoscopic depth perception, focal point convergence and the use of a 3D cursor and joy-stick enabled fly through with visualization of the spiculations extending from the breast cancer. The augmented reality system provided 3D visualization of the breast cancer with depth perception and visualization of the mass's spiculations. The augmented reality system should be further researched to determine the utility in clinical practice.

Effective augmentation of networked systems and enhancing pinning controllability

Science.gov (United States)

Jalili, Mahdi

2018-06-01

Controlling dynamics of networked systems to a reference state, known as pinning control, has many applications in science and engineering. In this paper, we introduce a method for effective augmentation of networked systems, while also providing high levels of pinning controllability for the final augmented network. The problem is how to connect a sub-network to an already existing network such that the pinning controllability is maximised. We consider the eigenratio of the augmented Laplacian matrix as a pinning controllability metric, and use graph perturbation theory to approximate the influence of edge addition on the eigenratio. The proposed metric can be effectively used to find the inter-network links connecting the disjoint networks. Also, an efficient link rewiring approach is proposed to further optimise the pinning controllability of the augmented network. We provide numerical simulations on synthetic networks and show that the proposed method is more effective than heuristic ones.

Aesthetic occiput augmentation using methylmethacrylate.

Science.gov (United States)

Song, Yong Tai

2015-01-01

Cranioplasty for only aesthetic reasons has not been commonly performed to date. However, recently there has been a new focus by the public on a more aesthetically pleasing head shape with frequent patient requests for purely aesthetic contouring of the occiput, an important definer of cosmetic head shape. For example, in Asia, where the normal cranial shape is mesocephalic or brachycephalic and often with a planar occiput, requests for its aesthetic correction are increasingly common. Accordingly, the author developed a minimally invasive occiput augmentation using methylmethacrylate. In this study, the indications for aesthetic occiput contouring were planar occiput, left-right asymmetric occiput, and grooved occiput. Under local anesthesia, soft methylmethacrylate is subperiosteally inserted through a small incision (about 5-cm length), manually and precisely contoured in situ through the scalp to the desired occipital shape. All is performed as an outpatient procedure, and a quick recovery is the case. Between March 2007 and October 2013, 959 patients received such aesthetic occiput augmentation. The mean follow-up period was 49 months (range, 3-84 months). Nearly all patients were satisfied with the outcome, and complications were very rare. Only 5 patients (0.5%) needed additional corrective procedures. The author has concluded that aesthetic occiput augmentation using methylmethacrylate yields consistent, predictable, and satisfactory results. Additional long-term follow-up is required for a final conclusion, however.

Augmenting Your Own Reality: Student Authoring of Science-Based Augmented Reality Games

Science.gov (United States)

Klopfer, Eric; Sheldon, Josh

2010-01-01

Augmented Reality (AR) simulations superimpose a virtual overlay of data and interactions onto a real-world context. The simulation engine at the heart of this technology is built to afford elements of game play that support explorations and learning in students' natural context--their own community and surroundings. In one of the more recent…

Augmented-pressure colostogram in imperforate anus with fistula

Energy Technology Data Exchange (ETDEWEB)

Gross, G.W. (Jefferson Medical Coll., Philadelphia, PA (United States). Dept. of Radiology); Wolfson, P.J. (Jefferson Medical Coll., Philadelphia, PA (United States). Dept. of Surgery); Pena, A. (Schneider Children' s Hospital, Long Island Jewish Medical Center, New York, NY (United States). Dept. of Pediatric Surgery)

1991-12-01

Most newborns with imperforate anus, except for those with very low varieties, undergo a diverting colostomy performed in the postnatal period, with definitive surgical repair at a later age. Accurate demonstration of the anatomy of any associated fistula between the rectum and urogenital tract is essential for optimal surgical management. An augmented-pressure distal segment colostogram is recommended prior to definitive repair, both to confirm the level of rectal atresia and to define any associated fistulous communication. We report a case of high imperforate anus with rectourethral fistula in which the fistulous tract was not identified on the conventional contrast colostogram but was readily delineated when an augmented-pressure modification of the technique was utilized. The technical aspects of augmented-pressure colostography are presented. (orig.).

Collaboration in Augmented Reality

NARCIS (Netherlands)

Lukosch, S.; Billinghurst, M.; Alem, L.; Kiyokawa, K.

2015-01-01

Augmented Reality (AR) is a technology that allows users to view and interact in real time with virtual images seamlessly superimposed over the real world. AR systems can be used to create unique collaborative experiences. For example, co-located users can see shared 3D virtual objects that they

Deterministic Local Sensitivity Analysis of Augmented Systems - I: Theory

International Nuclear Information System (INIS)

Cacuci, Dan G.; Ionescu-Bujor, Mihaela

2005-01-01

This work provides the theoretical foundation for the modular implementation of the Adjoint Sensitivity Analysis Procedure (ASAP) for large-scale simulation systems. The implementation of the ASAP commences with a selected code module and then proceeds by augmenting the size of the adjoint sensitivity system, module by module, until the entire system is completed. Notably, the adjoint sensitivity system for the augmented system can often be solved by using the same numerical methods used for solving the original, nonaugmented adjoint system, particularly when the matrix representation of the adjoint operator for the augmented system can be inverted by partitioning

Adenoma-carcinoma Sequence in the Bladder After Augmentation Cystoplasty

Directory of Open Access Journals (Sweden)

Akihiro Naito

2014-05-01

Full Text Available We present a case of a 64-year-old woman showing multistep progression from adenoma to adenocarcinoma in the bladder 46 years after augmentation ileocystoplasty. She underwent augmentation ileocystoplasty for tuberculous contracted bladder at 18 years. After 44 years, tubulovillous adenomas were found and resected at the ileovesical anastomosis site. After 2 more years, bladder tumors recurred and revealed adenocarcinomas. Finally, radical cystectomy was required because of frequent recurrence and tumor extensiveness. To our knowledge, this is the first case demonstrating adenoma-carcinoma sequence histopathologically in the bladder after augmentation cystoplasty, indicating multistep carcinogenesis similar to intestinal carcinogenesis.

Labia Majora Augmentation: A Systematic Review of the Literature.

Science.gov (United States)

Jabbour, Samer; Kechichian, Elio; Hersant, Barbara; Levan, Philippe; El Hachem, Lena; Noel, Warren; Nasr, Marwan

2017-10-16

Currently, there is no standardized approach for labia majora augmentation and controversies still exist regarding this subject. This systematic review aimed to assess the evidence in the literature regarding labia majora augmentation. On November 20, 2016, we conducted an online search of published articles in the Medline, Embase, and Cochrane databases. All articles describing labia majora augmentation were included in this review. Nine studies were selected for inclusion in the systematic review. Only 2 studies were prospective trials. The most commonly used technique was fat grafting with a total of 4 articles and 183 patients. The mean total injected fat volume ranged from 18 mL to 120 mL per session. Two articles described hyaluronic acid injection techniques. The total injected volume of hyaluronic acid ranged from 2 to 6 mL per session. Three articles used surgical techniques for labia majora augmentation. All included articles did not report any major or life-threatening complications. All techniques demonstrated high satisfaction rates. Labia majora augmentation appears to be a safe, efficient technique with a high satisfaction rate and no reported major complications. However, further randomized controlled trials are warranted. 4. © 2017 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com

Augmented reality in intraventricular neuroendoscopy.

Science.gov (United States)

Finger, T; Schaumann, A; Schulz, M; Thomale, Ulrich-W

2017-06-01

Individual planning of the entry point and the use of navigation has become more relevant in intraventricular neuroendoscopy. Navigated neuroendoscopic solutions are continuously improving. We describe experimentally measured accuracy and our first experience with augmented reality-enhanced navigated neuroendoscopy for intraventricular pathologies. Augmented reality-enhanced navigated endoscopy was tested for accuracy in an experimental setting. Therefore, a 3D-printed head model with a right parietal lesion was scanned with a thin-sliced computer tomography. Segmentation of the tumor lesion was performed using Scopis NovaPlan navigation software. An optical reference matrix is used to register the neuroendoscope's geometry and its field of view. The pre-planned ROI and trajectory are superimposed in the endoscopic image. The accuracy of the superimposed contour fitting on endoscopically visualized lesion was acquired by measuring the deviation of both midpoints to one another. The technique was subsequently used in 29 cases with CSF circulation pathologies. Navigation planning included defining the entry points, regions of interests and trajectories, superimposed as augmented reality on the endoscopic video screen during intervention. Patients were evaluated for postoperative imaging, reoperations, and possible complications. The experimental setup revealed a deviation of the ROI's midpoint from the real target by 1.2 ± 0.4 mm. The clinical study included 18 cyst fenestrations, ten biopsies, seven endoscopic third ventriculostomies, six stent placements, and two shunt implantations, being eventually combined in some patients. In cases of cyst fenestrations postoperatively, the cyst volume was significantly reduced in all patients by mean of 47%. In biopsies, the diagnostic yield was 100%. Reoperations during a follow-up period of 11.4 ± 10.2 months were necessary in two cases. Complications included one postoperative hygroma and one insufficient

Human-Assisted AI: an Intelligence Augmentation Approach

OpenAIRE

Alicea, Bradly

2018-01-01

As a flavor of Human-Computer Interaction (HCI), Human-Assisted AI can serve to both augment both human performance and artificial systems. This talk will feature a discussion of Human-assisted AI as an instance of Intelligence Augmentation (IA). We will discuss instances of weak and strong IA, in addition to contemporary examples of and paths forward for such systems. In the variety of models presented, data plays a critical role in the structure of interactions between human and artificial ...

Soft tissue augmentation 2006: filler fantasy.

Science.gov (United States)

Klein, Arnold William

2006-01-01

As an increasing number of patients seek esthetic improvement through minimally invasive procedures, interest in soft tissue augmentation and filling agents is at an all-time high. One reason for this interest is the availability of botulinum toxin type A, which works superbly in the upper face. The rejuvenation of the upper face has created much interest in injectable filling agents and implant techniques that work equally well in the restoration of the lower face. One of the central tenets of soft tissue augmentation is the concept of the three-dimensional face. The youthful face has a soft, full appearance, as opposed to the flat, pulled, two-dimensional look often achieved by more traditional surgical approaches. Injectable filling agents can augment and even at times, replace pulling. Additionally, with the lip as the focal center of the lower face, subtle lip enhancement is here to stay, and is in fact, the number one indication for injectable fillers. Moreover, minimally invasive soft tissue augmentation offers cosmetic enhancement without the cost and recovery time associated with more invasive procedures. As more and more physicians take interest in minimally invasive surgery, courses in cosmetic surgery techniques are becoming increasingly popular at the medical meetings of many specialties. Today, physicians have a much larger armamentarium of techniques and materials with which to improve facial contours, ameliorate wrinkles, and provide esthetic rejuvenation to the face. For a substance or device to be amenable for soft tissue augmentation in the medical community, it must meet certain criteria. It must have both a high "use" potential, producing cosmetically pleasing results with a minimum undesirable reactions, and have a low abuse potential in that widespread or incorrect or indiscriminate use would not result in significant morbidity. It must be nonteratogenic, noncarcinogenic, and nonmigratory. In addition, the agent must provide predictable

Medical augmentation of labor and the risk of ADHD in offspring

DEFF Research Database (Denmark)

Henriksen, Lonny; Wu, Chunsen; Secher, Niels Jørgen

2015-01-01

BACKGROUND AND OBJECTIVE: Oxytocin for labor augmentation is widely used in obstetric care in Western countries. Two recent, smaller studies found opposing results regarding the association between prenatal exposure to oxytocin for labor augmentation and attention-deficit/hyperactivity disorder...... (ADHD). In Denmark, oxytocin is the medication used for nearly all medical augmentations of labor, and we examined the association between medical augmentation of labor and ADHD in a large cohort study based on national register data. METHODS: All singletons born after spontaneous onset of labor...... in Denmark between 2000 and 2008 (N = 546 146) were included in the study. Data from the Danish Medical Birth Registry on medical augmentation of labor (yes/no) were used to identify exposed children. ADHD was defined based on the diagnostic codes of International Classification of Diseases, 10th Revision...

Gamma interferon augments Fc gamma receptor-mediated dengue virus infection of human monocytic cells.

OpenAIRE

Kontny, U; Kurane, I; Ennis, F A

1988-01-01

It has been reported that anti-dengue antibodies at subneutralizing concentrations augment dengue virus infection of monocytic cells. This is due to the increased uptake of dengue virus in the form of virus-antibody complexes by cells via Fc gamma receptors. We analyzed the effects of recombinant human gamma interferon (rIFN-gamma) on dengue virus infection of human monocytic cells. U937 cells, a human monocytic cell line, were infected with dengue virus in the form of virus-antibody complexe...

Augmented Reality og kulturarv

DEFF Research Database (Denmark)

Nielsen, Mikkel Kirkedahl Lysholm

2013-01-01

Museerne står overfor at skulle omfavne den digitale kultur i håndteringen af den store mængde viden, institutionerne repræsenterer. Augmented Reality-systemer forbinder ved hjælp af moderne teknologi det virtuelle med det virkelige, og kan derfor synes som en oplagt anvendelsesmulighed i...

Heating Augmentation for Short Hypersonic Protuberances

Science.gov (United States)

Mazaheri, Ali R.; Wood, William A.

2008-01-01

Computational aeroheating analyses of the Space Shuttle Orbiter plug repair models are validated against data collected in the Calspan University of Buffalo Research Center (CUBRC) 48 inch shock tunnel. The comparison shows that the average difference between computed heat transfer results and the data is about 9.5%. Using CFD and Wind Tunnel (WT) data, an empirical correlation for estimating heating augmentation on short hypersonic protuberances (k/delta less than 0.3) is proposed. This proposed correlation is compared with several computed flight simulation cases and good agreement is achieved. Accordingly, this correlation is proposed for further investigation on other short hypersonic protuberances for estimating heating augmentation.

Augmented Reality Video Games: New Possibilities and Implications for Children and Adolescents

Directory of Open Access Journals (Sweden)

Prithwijit Das

2017-04-01

Full Text Available In recent years, the video game market has embraced augmented reality video games, a class of video games that is set to grow as gaming technologies develop. Given the widespread use of video games among children and adolescents, the health implications of augmented reality technology must be closely examined. Augmented reality technology shows a potential for the promotion of healthy behaviors and social interaction among children. However, the full immersion and physical movement required in augmented reality video games may also put users at risk for physical and mental harm. Our review article and commentary emphasizes both the benefits and dangers of augmented reality video games for children and adolescents.

Error-enhanced augmented proprioceptive feedback in stroke rehabilitation training : a pilot study

NARCIS (Netherlands)

Molier, Birgit I.; de Boer, Jacintha; Prange, Gerdienke B.; Jannink, Michiel J.A.

2009-01-01

Augmented feedback plays an essential role in stroke rehabilitation therapy. When a force is applied to the arm, an augmented sensory (proprioceptive) cue is provided. The question was to find out if stroke patients can learn reach-and retrieval movements with error-enhanced augmented sensory

Augmented Reality for Maintenance and Repair (ARMAR)

Science.gov (United States)

2007-08-01

implementations by leveraging more robust vision algorithms or by using fiducials. 57 Fi gu re 2 3. A ug m en te d co nt ro ls st at e di ag ra m 58...34 Proceedings of the IEEE Conference on Virtual Reality (VR 󈧇), Washington, DC, 2003, p. 199. [18] W. Friedrich , "ARVIKA-Augmented Reality for...and ACM International Symposium on Mixed and Augmented Reality (ISMAR 󈧊), Santa Barbara , CA, 2006, pp. 105-108. [33] S. G. Rao, S. J. Schmugge

Crimes Scenes as Augmented Reality, off-screen, online and offline

DEFF Research Database (Denmark)

Sandvik, Kjetil; Waade, Anne-Marit

Our field of investigation is site specific realism in crime fiction and spatial production as media specific features. We analyze the (re)production of crime scenes in respectively crime series, computer games and tourist practice, and relate this to the ideas of augmented reality. Using...... a distinction between places as locations situated in the physical world and spaces as imagined or virtual locations as our point of departure, this paper investigates how places in various ways have become augmented by means of mediatization. Augmented reality represents processes of mediatization that broaden...... and enhance spatial experiences. These processes are characterized by the activation of users and the creation of artificial operational environments embedded in various physical or virtual locations. The idea of augmented spatial practice is related to the ideas of site specific aesthetic...

Crimes Scenes as Augmented Reality, off-screen, online and offline

DEFF Research Database (Denmark)

Sandvik, Kjetil; Waade, Anne Marit

2008-01-01

Our field of investigation is site specific realism in crime fiction and spatial production as media specific features. We analyze the (re)production of crime scenes in respectively crime series, computer games and tourist practice, and relate this to the ideas of augmented reality. Using...... a distinction between places as locations situated in the physical world and spaces as imagined or virtual locations as our point of departure, this paper investigates how places in various ways have become augmented by means of mediatization. Augmented reality represents processes of mediatization that broaden...... and enhance spatial experiences. These processes are characterized by the activation of users and the creation of artificial operational environments embedded in various physical or virtual locations. The idea of augmented spatial practice is related to the ideas of site specific aesthetic...

Augmented reality as a design tool for mobile interfaces

DEFF Research Database (Denmark)

Bertelsen, Olav Wedege; Nielsen, Christina

2000-01-01

applications derived from the classification of augmented reality interfaces. The focus on physical interaction with objects of work and with the mobile device provides us with a range of interaction styles, based on e.g. gestures and manipulation of objects. Furthermore, issues of transparency and directness......This paper challenges user interface paradigms for mobile devices, by using the technical classification of augmented reality interfaces as a thinking tool to develop ideas for interaction with mobile devices. The paper presents future work scenarios from a wastewater treatment plant embodying PDA...... are addressed. The future scenarios indicate that the concepts of augmented reality support solving context problems in mobile design....

Global navigation satellite systems performance analysis and augmentation strategies in aviation

Science.gov (United States)

Sabatini, Roberto; Moore, Terry; Ramasamy, Subramanian

2017-11-01

In an era of significant air traffic expansion characterized by a rising congestion of the radiofrequency spectrum and a widespread introduction of Unmanned Aircraft Systems (UAS), Global Navigation Satellite Systems (GNSS) are being exposed to a variety of threats including signal interferences, adverse propagation effects and challenging platform-satellite relative dynamics. Thus, there is a need to characterize GNSS signal degradations and assess the effects of interfering sources on the performance of avionics GNSS receivers and augmentation systems used for an increasing number of mission-essential and safety-critical aviation tasks (e.g., experimental flight testing, flight inspection/certification of ground-based radio navigation aids, wide area navigation and precision approach). GNSS signal deteriorations typically occur due to antenna obscuration caused by natural and man-made obstructions present in the environment (e.g., elevated terrain and tall buildings when flying at low altitude) or by the aircraft itself during manoeuvring (e.g., aircraft wings and empennage masking the on-board GNSS antenna), ionospheric scintillation, Doppler shift, multipath, jamming and spurious satellite transmissions. Anyone of these phenomena can result in partial to total loss of tracking and possible tracking errors, depending on the severity of the effect and the receiver characteristics. After designing GNSS performance threats, the various augmentation strategies adopted in the Communication, Navigation, Surveillance/Air Traffic Management and Avionics (CNS + A) context are addressed in detail. GNSS augmentation can take many forms but all strategies share the same fundamental principle of providing supplementary information whose objective is improving the performance and/or trustworthiness of the system. Hence it is of paramount importance to consider the synergies offered by different augmentation strategies including Space Based Augmentation System (SBAS), Ground

Molecular phylogenetic trees - On the validity of the Goodman-Moore augmentation algorithm

Science.gov (United States)

Holmquist, R.

1979-01-01

A response is made to the reply of Nei and Tateno (1979) to the letter of Holmquist (1978) supporting the validity of the augmentation algorithm of Moore (1977) in reconstructions of nucleotide substitutions by means of the maximum parsimony principle. It is argued that the overestimation of the augmented numbers of nucleotide substitutions (augmented distances) found by Tateno and Nei (1978) is due to an unrepresentative data sample and that it is only necessary that evolution be stochastically uniform in different regions of the phylogenetic network for the augmentation method to be useful. The importance of the average value of the true distance over all links is explained, and the relative variances of the true and augmented distances are calculated to be almost identical. The effects of topological changes in the phylogenetic tree on the augmented distance and the question of the correctness of ancestral sequences inferred by the method of parsimony are also clarified.

The effects of weekly augmentation therapy in patients with PiZZ α1-antitrypsin deficiency

Directory of Open Access Journals (Sweden)

Schmid ST

2012-09-01

Full Text Available ST Schmid,1 J Koepke,1 M Dresel,1 A Hattesohl,1 E Frenzel,2 J Perez,3 DA Lomas,4 E Miranda,5 T Greulich,1 S Noeske,1 M Wencker,6 H Teschler,6 C Vogelmeier,1 S Janciauskiene,2,* AR Koczulla1,*1Department of Internal Medicine, Division for Pulmonary Diseases, University Hospital Marburg, Marburg, Germany; 2Department of Respiratory Medicine, Hannover Medical School, Hannover, Germany; 3Department of Cellular Biology, University of Malaga, Malaga, Spain; 4Department of Medicine, Cambridge Institute for Medical Research, University of Cambridge, Cambridge, United Kingdom; 5Department of Biology and Biotechnology, Istituto Pasteur – Fondazione Cenci Bolognetti, Sapienza University of Rome, Rome, Italy; 6Department of Pneumology, West German Lung Clinic, Essen University Hospital, Essen, Germany*These authors contributed equally to this workBackground: The major concept behind augmentation therapy with human α1-antitrypsin (AAT is to raise the levels of AAT in patients with protease inhibitor phenotype ZZ (Glu342Lys-inherited AAT deficiency and to protect lung tissues from proteolysis and progression of emphysema.Objective: To evaluate the short-term effects of augmentation therapy (Prolastin® on plasma levels of AAT, C-reactive protein, and chemokines/cytokines.Materials and methods: Serum and exhaled breath condensate were collected from individuals with protease inhibitor phenotype ZZ AAT deficiency-related emphysema (n = 12 on the first, third, and seventh day after the infusion of intravenous Prolastin. Concentrations of total and polymeric AAT, interleukin-8 (IL-8, monocyte chemotactic protein-1, IL-6, tumor necrosis factor-α, vascular endothelial growth factor, and C-reactive protein were determined. Blood neutrophils and primary epithelial cells were also exposed to Prolastin (1 mg/mL.Results: There were significant fluctuations in serum (but not in exhaled breath condensate levels of AAT polymers, IL-8, monocyte chemotactic protein-1, IL

Research on Design of MUH Attitude Stability Augmentation Control System

Science.gov (United States)

Fan, Shigang

2017-09-01

Attitude stability augmentation control system with a lower cost need to be designed so that MUH (Mini Unmanned Helicopter) can adapt to different types of geographic environment and fly steadily although the weather may be bad. Attitude feedback was calculated mainly by filtering estimation within attitude acquisition module in this system. Stability augmentation can be improved mainly by PI. This paper will depict running principle and designing process of MUH attitude stability augmentation control system and algorithm that is considered as an important part in this system.

Il telerilevamento a supporto dell’Augmented Reality

Directory of Open Access Journals (Sweden)

Filippo Gemma

2011-04-01

Full Text Available Fondere insieme realtà e oggetti virtuali per muoversi al meglio con efficacia ed efficienza è quanto si propone, tramite la  Realtà Aumentata, la AGI, Analytical Graphics Inc. di Exton (USA, distribuita in esclusiva in Italia da GMSPAZIO che offre il sistema STK, storicamente conosciuto come Satellite ToolKit che offre più di quarantamila utenti nel mondo un esteso set di funzionalità capaci di soddisfare ogni tipo di esigenza.Remote  Sensing  and  Augmented RealityAugmented reality has been used for years  in  the  broadcast  industry.  You see it every time the National Football League paints a yellow first-down line on the playing field. While it is com-monplace and easy to execute in con-trolled environments with fixed cam-era  positions,  predetermined  angles and known terrain, the opposite is true in uncontrolled environments, such as battlefields in Kandahar. Nonetheless, augmented reality is essential for the warfighter, and the global intelligence community (IC is faced with the chal-lenge  of  efficiently  creating  and  dis-seminating intelligence products from increasing  amounts  of  video  data. AGI’s  Insight3D  development  library is helping to overcome many hurdles of ISR-focused augmented reality.

Il telerilevamento a supporto dell’Augmented Reality

Directory of Open Access Journals (Sweden)

Filippo Gemma

2011-04-01

Full Text Available Fondere insieme realtà e oggetti virtuali per muoversi al meglio con efficacia ed efficienza è quanto si propone, tramite la  Realtà Aumentata, la AGI, Analytical Graphics Inc. di Exton (USA, distribuita in esclusiva in Italia da GMSPAZIO che offre il sistema STK, storicamente conosciuto come Satellite ToolKit che offre più di quarantamila utenti nel mondo un esteso set di funzionalità capaci di soddisfare ogni tipo di esigenza. Remote  Sensing  and  Augmented Reality Augmented reality has been used for years  in  the  broadcast  industry.  You see it every time the National Football League paints a yellow first-down line on the playing field. While it is com-monplace and easy to execute in con-trolled environments with fixed cam-era  positions,  predetermined  angles and known terrain, the opposite is true in uncontrolled environments, such as battlefields in Kandahar. Nonetheless, augmented reality is essential for the warfighter, and the global intelligence community (IC is faced with the chal-lenge  of  efficiently  creating  and  dis-seminating intelligence products from increasing  amounts  of  video  data. AGI’s  Insight3D  development  library is helping to overcome many hurdles of ISR-focused augmented reality.

Facial sculpting and tissue augmentation.

Science.gov (United States)

Carruthers, Jean D A; Carruthers, Alastair

2005-11-01

Until recently, deep facial sculpting was exclusively the domain of surgical interventions. Recent advances in the available array of dermal and subdermal fillers combined with an esthetic appreciation by both surgeons and nonsurgeons alike of the positive effect of filling the volume-depleted face have led to an expansion in the indications for the use of soft tissue augmenting agents. Subdermal support of the lateral two-thirds of the brow, the nasojugal fold, the malar and buccal fat pads, the lateral lip commissures, and the perioral region, including the pre-jowl sulcus, all restore youthful facial contour and harmony. An important advance in technique is the subdermal rather than the intradermal injection plane. "Instant" facial sculpting giving a brow-lift, cheek-lift, lip expansion, and perioral augmentation is possible using modern soft tissue augmenting agents. The softer, more relaxed appearance contrasts to the somewhat "pulled" appearance of subjects who have had surgical overcorrections. Treatments can be combined with botulinum toxin and other procedures if required. Newer advances in the use of fillers include the use of fillers injected in the subdermal plane for "lunchtime" facial sculpting. Using the modern esthetic filler compounds, which are biodegradable but longer lasting, subjects can have a "rehearsal" treatment or make it ongoing. Some individuals, such as those with human immunodeficiency virus (HIV)-related lipoatrophy or those who desire to obtain a longer-lasting effect, may elect to use a nonbiodegradable filling agent.

New Augmented Reality Taxonomy: Technologies and Features of Augmented Environment.

OpenAIRE

Hugues , Olivier; Fuchs , Philippe; Nannipieri , Olivier

2011-01-01

978-1-4614-0063-9; This article has a dual aim: firstly to define augmented reality (AR) en- vironments and secondly, based on our definition, a new taxonomy enabling these environments to be classified. After briefly reviewing existing classifica- tions, we define AR by its purpose, ie. to enable someone to create sensory- motor and cognitive activities in a new space combining the real environment and a virtual environment. Below we present our functional taxonomy of AR environments. We div...

Natural cytolytic activity in mice with natural or induced cellular defects. I. Differential ability of in vitro interleukin-2 addition to augment natural cytolytic function

International Nuclear Information System (INIS)

Ades, E.W.; Hinson, A.; Butler, L.D.

1986-01-01

The ability of in vitro addition of recombinant interleukin 2 (rIL-2) to differentially enhance natural cytotoxicity was assessed using cells from mice with natural and induced cellular defects. In vivo treatment with most immunosuppressive or cytoreductive agents, anti-asialo-GM1 antibody, or gamma irradiation dramatically reduced in vitro cytotoxicity against natural killer (NK) sensitive targets by direct reduction in either percentage specific lysis or lytic units per spleen. In most cases, in vitro addition of rIL-2 (at concentrations causing augmented NK function in cells from naive Balb/C mice) enhanced cytotoxic activity of cells from treatment groups to a normal value but not within the rIL-2-enhanced range of nontreated animals. Additionally, cytotoxic activity of cells from animals treated with certain drugs or gamma irradiation could be augmented by rIL-2 when measured by percentage lysis but not lytic units per spleen. In vivo treatment with cyclosporin A did not affect natural cytotoxic activity and addition of rIL-2 augmented the NK activity in a similar fashion to the profile of naive cells. In experiments using cells from beige (C57Bl/6-bg) mice which have a natural defect in NK activity against YAC-1 targets, addition of rIL-2 (at concentrations causing augmented natural cytotoxic function in cells from C57Bl/6 mice) could not effectively enhance in vitro natural cytotoxic function

Natural cytolytic activity in mice with natural or induced cellular defects. I. Differential ability of in vitro interleukin-2 addition to augment natural cytolytic function

Energy Technology Data Exchange (ETDEWEB)

Ades, E.W.; Hinson, A.; Butler, L.D.

1986-08-01

The ability of in vitro addition of recombinant interleukin 2 (rIL-2) to differentially enhance natural cytotoxicity was assessed using cells from mice with natural and induced cellular defects. In vivo treatment with most immunosuppressive or cytoreductive agents, anti-asialo-GM1 antibody, or gamma irradiation dramatically reduced in vitro cytotoxicity against natural killer (NK) sensitive targets by direct reduction in either percentage specific lysis or lytic units per spleen. In most cases, in vitro addition of rIL-2 (at concentrations causing augmented NK function in cells from naive Balb/C mice) enhanced cytotoxic activity of cells from treatment groups to a normal value but not within the rIL-2-enhanced range of nontreated animals. Additionally, cytotoxic activity of cells from animals treated with certain drugs or gamma irradiation could be augmented by rIL-2 when measured by percentage lysis but not lytic units per spleen. In vivo treatment with cyclosporin A did not affect natural cytotoxic activity and addition of rIL-2 augmented the NK activity in a similar fashion to the profile of naive cells. In experiments using cells from beige (C57Bl/6-bg) mice which have a natural defect in NK activity against YAC-1 targets, addition of rIL-2 (at concentrations causing augmented natural cytotoxic function in cells from C57Bl/6 mice) could not effectively enhance in vitro natural cytotoxic function.

Leap Motion controller application in augmented reality technology

OpenAIRE

Artemčiukas, Edgaras; Sakalauskas, Leonidas

2014-01-01

In this work the analysis of interaction techniques, devices and its’ possibilities were accomplished. It was determined that the problem, which many researchers tries to solve – more natural interaction between users and computers. Interaction system in augmented reality environment using Leap Motion controller was developed. To achieve this goal augmented reality NyARToolkit and Leap Motion controller libraries were used. Solution ensures extensive information about hand, finger...

Reconstructive approach for patients with augmentation mammaplasty undergoing nipple-sparing mastectomy.

Science.gov (United States)

Alperovich, Michael; Choi, Mihye; Frey, Jordan D; Karp, Nolan S

2014-09-01

Nipple-sparing mastectomy (NSM) is a recent advance in the therapeutic and prophylactic management of breast cancer; however, the procedure is associated with increased reconstructive complications. Data on NSM after previous breast augmentation are limited. The authors compared reconstructive complications after NSM between patients with previously augmented breasts and a larger cohort that had not undergone prior augmentation. An approach to NSM that involves 2-stage reconstruction in augmented patients is also described. Medical records of NSMs performed at New York University Langone Medical Center from 2006 to 2013 were reviewed. Data points evaluated included patient characteristics, comorbidities, breast implant plane, and reconstructive complications. Fisher's exact and t tests were used for the comparisons. During the study period, NSMs were performed in 17 augmented breasts at this institution. After NSM, 15 of these breasts underwent implant-based reconstruction and 2 breasts underwent microvascular free flaps. Reconstructive complications included 1 hematoma managed nonoperatively (5.9%) and 1 partial necrosis of the nipple-areola complex (NAC) (5.9%). Compared with the larger nonaugmented cohort (n=332), patients with previously augmented breasts had fewer complications, and there were no statistically significant differences in the rates of mastectomy flap necrosis, partial NAC necrosis, complete NAC necrosis, hematoma, capsular contracture, explantation, implant displacement, seroma, or breast cellulitis. The results indicate that NSM reconstruction is associated with minimal complications in patients with previous augmentation mammaplasty. 4. © 2014 The American Society for Aesthetic Plastic Surgery, Inc.

Augmented Reality in Science Education

DEFF Research Database (Denmark)

Nielsen, Birgitte Lund; Brandt, Harald; Swensen, Hakon

Augmented reality (AR) holds great promise as a learning tool. However, most extant studies in this field have focused on the technology itself. The poster presents findings from the first stage of the AR-sci project addressing the issue of applying AR for educational purposes. Benefits and chall......Augmented reality (AR) holds great promise as a learning tool. However, most extant studies in this field have focused on the technology itself. The poster presents findings from the first stage of the AR-sci project addressing the issue of applying AR for educational purposes. Benefits...... and challenges related to AR enhancing student learning in science in lower secondary school were identified by expert science teachers, ICT designers and science education researchers from four countries in a Delphi survey. Findings were condensed in a framework to categorize educational AR designs....

Augmented Reality i naturfagsundervisningen

DEFF Research Database (Denmark)

Radmer, Ole; Surland, Mogens; Nielsen, Birgitte Lund

Augmented Reality (AR) giver ny mulighed for, at elever kan lave undersøgelser i naturfag med enkel teknologi, hvor animationer og simulationer kobles med det virkelige fænomen. I workshoppen kan I afprøve AR eksempler, udviklet i et internationalt EU projekt. Der vil være noget, der direkte kan...

Introducing Augmented Reality in Cultural Heritage Studies

OpenAIRE

Villarejo, Luis; González-Reverté, Francesc; Miralbell, Oriol; Gomis, Joan Miquel

2014-01-01

Augmented Reality is a technology that allows overlaid digital content into our view of the real world through the camera of a Smartphone or a tablet. Video, audio, 2D and 3D images, web and text are just some examples of the type of content that can be overlaid on our perception of the real world. This content can be associated with real world elements by means of geolocation or image recognition. Such technology has great engagement potential and is used in many fields to augment the users’...

Augmented Reality Environments in Learning, Communicational and Professional Contexts in Higher Education

Science.gov (United States)

Martín Gutiérrez, Jorge; Meneses Fernández, María Dolores

2014-01-01

This paper explores educational and professional uses of augmented learning environment concerned with issues of training and entertainment. We analyze the state-of-art research of some scenarios based on augmented reality. Some examples for the purpose of education and simulation are described. These applications show that augmented reality can…

PMMA-hydroxyapatite composite material retards fatigue failure of augmented bone compared to augmentation with plain PMMA: in vivo study using a sheep model.

Science.gov (United States)

Arabmotlagh, Mohammad; Bachmaier, Samuel; Geiger, Florian; Rauschmann, Michael

2014-11-01

Polymethylmethacrylate (PMMA) is the most commonly used void filler for augmentation of osteoporotic vertebral fracture, but the differing mechanical features of PMMA and osteoporotic bone result in overload and failure of adjacent bone. The aim of this study was to compare fatigue failure of bone after augmentation with PMMA-nanocrystalline hydroxyapatite (HA) composite material or with plain PMMA in a sheep model. After characterization of the mechanical properties of a composite material consisting of PMMA and defined amounts (10, 20, and 30% volume fraction) of HA, the composite material with 30% volume fraction HA was implanted in one distal femur of sheep; plain PMMA was implanted in the other femur. Native non-augmented bone served as control. Three and 6 months after implantation, the augmented bone samples were exposed to cyclic loading and the evolution of damage was investigated. The fatigue life was highest for the ovine native bone and lowest for bone-PMMA specimens. Bone-composite specimens showed significantly higher fatigue life than the respective bone-PMMA specimens in both 3- and 6-month follow-up groups. These results suggest that modification of mechanical properties of PMMA by addition of HA to approximate those of cancellous bone retards fatigue failure of the surrounding bone compared to augmented bone with plain PMMA. © 2014 Wiley Periodicals, Inc.

Chest x-ray generation and data augmentation for cardiovascular abnormality classification

Science.gov (United States)

Madani, Ali; Moradi, Mehdi; Karargyris, Alexandros; Syeda-Mahmood, Tanveer

2018-03-01

Medical imaging datasets are limited in size due to privacy issues and the high cost of obtaining annotations. Augmentation is a widely used practice in deep learning to enrich the data in data-limited scenarios and to avoid overfitting. However, standard augmentation methods that produce new examples of data by varying lighting, field of view, and spatial rigid transformations do not capture the biological variance of medical imaging data and could result in unrealistic images. Generative adversarial networks (GANs) provide an avenue to understand the underlying structure of image data which can then be utilized to generate new realistic samples. In this work, we investigate the use of GANs for producing chest X-ray images to augment a dataset. This dataset is then used to train a convolutional neural network to classify images for cardiovascular abnormalities. We compare our augmentation strategy with traditional data augmentation and show higher accuracy for normal vs abnormal classification in chest X-rays.

Long-term stability of contour augmentation in the esthetic zone

DEFF Research Database (Denmark)

Jensen, Simon S; Bosshardt, Dieter D; Gruber, Reinhard

2014-01-01

, recent data from cone beam computed tomography studies have shown the augmented volume to be stable long-term. However, no human histologic data are available to document the tissue reactions to this bone augmentation procedure. METHODS: Over an 8-year period, 12 biopsies were harvested 14 to 80 months......BACKGROUND: Contour augmentation around early-placed implants (Type 2 placement) using autogenous bone chips combined with deproteinized bovine bone mineral (DBBM) and a collagen barrier membrane has been documented to predictably provide esthetically satisfactory clinical outcomes. In addition...... after implant placement with simultaneous contour augmentation in 10 patients. The biopsies were subjected to histologic and histomorphometric analysis. RESULTS: The biopsies consisted of 32.0% ± 9.6% DBBM particles and 40.6% ± 14.6% mature bone. 70.3% ± 14.5% of the DBBM particle surfaces were covered...

Utilizing image guided surgery for user interaction in medical augmented reality

OpenAIRE

Fischer, Jan; Bartz, Dirk

2005-01-01

The graphical overlay of additional medical information over the patient during a surgical procedure has long been considered one of the most promising applications of augmented reality. While many experimental systems for augmented reality in medicine have reached an advanced state and can deliver high-quality augmented video streams, they usually depend heavily on specialized dedicated hardware. Such dedicated system components, which originally have been designed for engineering applicatio...

The Biomechanical Role of Scaffolds in Augmented Rotator Cuff Tendon Repairs

Science.gov (United States)

2012-01-01

The biomechanical role of scaffolds in augmented rotator cuff tendon repairs Amit Aurora, D Enga,b, Jesse A. McCarron, MDc, Antonie J. van den Bogert...used for rotator cuff repair augmentation; however, the appropriate scaffold material properties and/or surgical application techniques for achieving...The model predicts that the biomechanical performance of a rotator cuff repair can be modestly increased by augmenting the repair with a scaffold that

FEATURES OF USING AUGMENTED REALITY TECHNOLOGY TO SUPPORT EDUCATIONAL PROCESSES

Directory of Open Access Journals (Sweden)

Yury A. Kravchenko

2014-01-01

Full Text Available The paper discusses the concept and technology of augmented reality, the rationale given the relevance and timeliness of its use to support educational processes. Paper is a survey and study of the possibility of using augmented reality technology in education. Architecture is proposed and constructed algorithms of the software system management QR-codes media objects. An overview of the features and uses of augmented reality technology to support educational processes is displayed, as an option of a new form of visual demonstration of complex objects, models and processes. 

Routine sensor-augmented pump therapy in type 1 diabetes

DEFF Research Database (Denmark)

Nørgaard, Kirsten; Scaramuzza, Andrea; Bratina, Natasa

2013-01-01

Sensor-augmented pump (SAP) therapy can improve glycemic control, compared with multiple daily insulin injections or with insulin pump therapy alone, without increasing the risk of hypoglycemia.......Sensor-augmented pump (SAP) therapy can improve glycemic control, compared with multiple daily insulin injections or with insulin pump therapy alone, without increasing the risk of hypoglycemia....

An Efficiency Analysis of Augmented Reality Marker Recognition Algorithm

Directory of Open Access Journals (Sweden)

Kurpytė Dovilė

2014-05-01

Full Text Available The article reports on the investigation of augmented reality system which is designed for identification and augmentation of 100 different square markers. Marker recognition efficiency was investigated by rotating markers along x and y axis directions in range from −90° to 90°. Virtual simulations of four environments were developed: a an intense source of light, b an intense source of light falling from the left side, c the non-intensive light source falling from the left side, d equally falling shadows. The graphics were created using the OpenGL graphics computer hardware interface; image processing was programmed in C++ language using OpenCV, while augmented reality was developed in Java programming language using NyARToolKit. The obtained results demonstrate that augmented reality marker recognition algorithm is accurate and reliable in the case of changing lighting conditions and rotational angles - only 4 % markers were unidentified. Assessment of marker recognition efficiency let to propose marker classification strategy in order to use it for grouping various markers into distinct markers’ groups possessing similar recognition properties.

Operational Data Augmentation in Classifying Single Aerial Images of Animals

NARCIS (Netherlands)

Okafor, Emmanuel; Smit, Rik; Schomaker, Lambertus; Wiering, Marco

2017-01-01

In deep learning, data augmentation is important to increase the amount of training images to obtain higher classification accuracies. Most data-augmentation methods adopt the use of the following techniques: cropping, mirroring, color casting, scaling and rotation for creating additional training

Bibliography on augmentation of convective heat and mass transfer

International Nuclear Information System (INIS)

Bergles, A.E.; Webb, R.L.; Junkhan, G.H.; Jensen, M.K.

1979-05-01

Heat transfer augmentation has developed into a major specialty area in heat transfer research and development. A bibliography of world literature on augmentation is presented. The literature is classified into passive augmentation techniques, which require no external power, and active techniques, which do require external power. The fourteen techniques are grouped in terms of their application to the various modes of heat transfer. Mass transfer is included for completeness. Key words are included with each citation for technique/mode identification. The total number of publications cited is 1,967, including 75 surveys of various techniques and 42 papers on performance evaluation of passive techniques. Patents are not included as they will be the subject of a future topical report

Augmented Reality user interface analysis in mobile devices

OpenAIRE

Guzmán Guzmán, José Daniel

2014-01-01

[ENGLISH] The presence of high-end phones in the telephony market, has allowed consumers to have access to the computational power of mobile smart-phone devices. Powerful processors, combined with cameras and ease of development encourage an increasing number of Augmented Reality (AR) researchers to adopt mobile smart-phones as AR platform. The same way, Augmented Reality on mobile devices has become increasingly popular for many applications, including search and location, tourism, and shopp...

Augmented Reality Sandbox and Constructivist Approach for Geoscience Teaching and Learning

OpenAIRE

Muhammad Nawaz; Sandeep N. Kundu; Farha Sattar

2017-01-01

Augmented reality sandbox adds new dimensions to education and learning process. It can be a core component of geoscience teaching and learning to understand the geographic contexts and landform processes. Augmented reality sandbox is a useful tool not only to create an interactive learning environment through spatial visualization but also it can provide an active learning experience to students and enhances the cognition process of learning. Augmented reality sandbox can be used as an inter...

The Palatal Window for Treating an Incompletely Augmented Maxillary Sinus.

Science.gov (United States)

Florio, Salvatore; Suzuki, Takanori; Cho, Sang-Choon

2017-04-01

Maxillary sinus augmentation through a lateral window is reported as one of the most predictable bone augmentation procedures before implant placement. The elevation of the membrane represents a delicate and crucial step that allows the creation of the space for the bone graft material. If the elevation is not completed, the regenerated bone might be inadequate for the implant placement. In this case, a new intervention will be necessary to complete the bone augmentation. Reaccessing from a lateral window, however, would be challenging due to thickness of the buccal boney wall because of the first grafting procedure; therefore, a different approach has to be used. The aim of this case report is to present the palatal window technique for treating incompletely augmented maxillary sinus. The detailed step-by-step diagnostic and surgical procedures are described, and the advantages and limitations of the technique are discussed through a review of the literature.

Data Augmentation for Plant Classification

NARCIS (Netherlands)

Pawara, Pornntiwa; Okafor, Emmanuel; Schomaker, Lambertus; Wiering, Marco

2017-01-01

Data augmentation plays a crucial role in increasing the number of training images, which often aids to improve classification performances of deep learning techniques for computer vision problems. In this paper, we employ the deep learning framework and determine the effects of several

Cytochalasin B augments diacylglycerol levels in stimulated neutrophils

International Nuclear Information System (INIS)

Honeycutt, P.J.; Niedel, J.

1986-01-01

Diacylglycerol (DG) has gained wide acceptance as an important second messenger and intracellular activator of protein kinase C, but few studies have directly measured DG levels in cells or tissues. The authors measured the mass of DG in lipid extracts from normal human neutrophils by quantitative conversion of DG to [ 32 P] phosphatidic acid using E. coli DG kinase. The chemotactic peptide N-formyl-Met-Leu-Phe (fMLP) stimulated a transient 30% rise in DG that was maximal at 30 to 45 sec and returned to the basal level of 150 picomoles/10 7 cells by one min. This initial peak was followed by a slower, more prolonged 30% increase in DG that was maximal at 20 min. Cytochalasin B (CB) augments many biological responses of neutrophils to fMLP, including superoxide production and lysosomal enzyme release. CB alone caused no change in basal DG levels, but in the presence of CB, fMLP stimulated a rapid, large, and persistent DG response. DG levels increased to 290% of basal at 5 min with a t1/2 = 45 sec. The DG response to fMLP was maximal at 5 to 10 μm CB and 1 μM fMLP. The DG response to optimal fMLP and CB concentrations was decreased 40% by an fMLP antagonist, and no response was elicited by an inactive fMLP analog and CB. Protein kinase C has been implicated in fMLP-stimulated superoxide production and lysosomal enzyme release. These data are consistent with the hypothesis that CB may effect augmentation of biological responses by increasing DG levels

Augmented Reality in Sports: Today and Tomorrow

Directory of Open Access Journals (Sweden)

Zafer BOZYER

2015-08-01

Full Text Available The rapid change experienced in the field of Information Technologies makes the informati cs more tangible in daily life. Today, it became possible to encounter with the informatics applications almost all the disciplines. As a matter of course, many informatics applications are put into the practice regarding the sports discipline. Because of the condition that the power of information processing has increased and the studies on wearable technol ogies in addition to the expert system design, augmented reality (AR has become a topic which gains imp ortance in the field of sports. There are many studies that are conducted with the aim of increasing the efficiency of physical activities done in many sports branches, ensuring a more fair management of competitions and providing the opportunity for spectators to watch the competitions in a more comfortable and efficient way. In this study; the information about the current augmented reality practices th at are used in various sports branches has been given and the mobile and interactive augmented reality practices which are possible to be seen in future have been mentioned. In addition, there is an augmented reality practice which is designed with the aim of ensuring that the shoots of sports people who are interested in archery, are more stable and of ensuring that the trainings and exercises are more efficient by stating to the sports people whether he or she is in the right position for shoot which is c alled as T shape seen at the time of releasing the arrow.

Global Navigation Satellite System and Augmentation

Indian Academy of Sciences (India)

aircraft-based augmentation system (ABAS). ... segment, the ground segment (or) control segment and the user segment ... control station (MCS), and ground antennas. ... repeatability, multipath rejection, size, profile, and environmental.

Augmented reality building operations tool

Science.gov (United States)

Brackney, Larry J.

2014-09-09

A method (700) for providing an augmented reality operations tool to a mobile client (642) positioned in a building (604). The method (700) includes, with a server (660), receiving (720) from the client (642) an augmented reality request for building system equipment (612) managed by an energy management system (EMS) (620). The method (700) includes transmitting (740) a data request for the equipment (612) to the EMS (620) and receiving (750) building management data (634) for the equipment (612). The method (700) includes generating (760) an overlay (656) with an object created based on the building management data (634), which may be sensor data, diagnostic procedures, or the like. The overlay (656) is configured for concurrent display on a display screen (652) of the client (642) with a real-time image of the building equipment (612). The method (700) includes transmitting (770) the overlay (656) to the client (642).

Patellar Tendon Repair Augmentation With a Knotless Suture Anchor Internal Brace: A Biomechanical Cadaveric Study.

Science.gov (United States)

Rothfeld, Alex; Pawlak, Amanda; Liebler, Stephenie A H; Morris, Michael; Paci, James M

2018-04-01

Patellar tendon repair with braided polyethylene suture alone is subject to knot slippage and failure. Several techniques to augment the primary repair have been described. Purpose/Hypothesis: The purpose was to evaluate a novel patellar tendon repair technique augmented with a knotless suture anchor internal brace with suture tape (SAIB). The hypothesis was that this technique would be biomechanically superior to a nonaugmented repair and equivalent to a standard augmentation with an 18-gauge steel wire. Controlled laboratory study. Midsubstance patellar tendon tears were created in 32 human cadaveric knees. Two comparison groups were created. Group 1 compared #2 supersuture repair without augmentation to #2 supersuture repair with SAIB augmentation. Group 2 compared #2 supersuture repair with an 18-gauge stainless steel cerclage wire augmentation to #2 supersuture repair with SAIB augmentation. The specimens were potted and biomechanically loaded on a materials testing machine. Yield load, maximum load, mode of failure, plastic displacement, elastic displacement, and total displacement were calculated for each sample. Standard statistical analysis was performed. There was a statistically significant increase in the mean ± SD yield load and maximum load in the SAIB augmentation group compared with supersuture alone (mean yield load: 646 ± 202 N vs 229 ± 60 N; mean maximum load: 868 ± 162 N vs 365 ± 54 N; P augmented repairs (mean yield load: 495 ± 213 N vs 566 ± 172 N; P = .476; mean maximum load: 737 ± 210 N vs 697 ± 130 N; P = .721). Patellar tendon repair augmented with SAIB is biomechanically superior to repair without augmentation and is equivalent to repair with augmentation with an 18-gauge stainless steel cerclage wire. This novel patellar tendon repair augmentation is equivalent to standard 18-gauge wire augmentation at time zero. It does not require a second surgery for removal, and it is biomechanically superior to primary repair alone.

Augmented Cognition - Phase 4 Cognitive Assessment and Task Management (CAT-M)

National Research Council Canada - National Science Library

Bingham, Richard; Kineses, Wilhelm E

2008-01-01

.... Initially, the Augmented Cognition program has focused on cognitive overload situations. Looking towards a complete solution for Augmented Cognition, another situation required the understanding of the concept of task underload...

Augmented reality art from an emerging technology to a novel creative medium

CERN Document Server

Geroimenko, Vladimir

2014-01-01

This is the first ever book on augmented reality art. It is written by a team of world-leading artists, researchers and practitioners, pioneering in the use of augmented reality technology as a novel artistic medium. The book explores a wide range of major aspects of augmented reality art and its enabling technology. It is intended to be a starting point and essential reading not only for artists, researchers and technology developers, but also for students (both graduates and undergraduates) and everyone who is interested in emerging augmented reality technology and its current and future app

Introduction to Mobile Augmented Reality Development in Unity

OpenAIRE

Jacob W. Greene

2016-01-01

This lesson serves as an introduction to creating mobile augmented reality applications. Augmented reality (AR) can be defined as the overlaying of digital content (images, video, text, sound, etc.) onto physical objects or locations, and it is typically experienced by looking through the camera lens of an electronic device such as a smartphone, tablet, or optical head-mounted display (e.g. Microsoft Hololens). Although AR is a cutting-edge, complex technology, there are a number of user-frie...

D3D augmented reality imaging system: proof of concept in mammography.

Science.gov (United States)

Douglas, David B; Petricoin, Emanuel F; Liotta, Lance; Wilson, Eugene

2016-01-01

The purpose of this article is to present images from simulated breast microcalcifications and assess the pattern of the microcalcifications with a technical development called "depth 3-dimensional (D3D) augmented reality". A computer, head display unit, joystick, D3D augmented reality software, and an in-house script of simulated data of breast microcalcifications in a ductal distribution were used. No patient data was used and no statistical analysis was performed. The D3D augmented reality system demonstrated stereoscopic depth perception by presenting a unique image to each eye, focal point convergence, head position tracking, 3D cursor, and joystick fly-through. The D3D augmented reality imaging system offers image viewing with depth perception and focal point convergence. The D3D augmented reality system should be tested to determine its utility in clinical practice.

Biomechanics of Polyhydroxyalkanoate Mesh-Augmented Single-Row Rotator Cuff Repairs.

Science.gov (United States)

Tashjian, Robert Z; Kolz, Christopher W; Suter, Thomas; Henninger, Heath B

Polyhydroxyalkanoate (PHA) mesh is a bioresorbable scaffold used to reinforce the suture-tendon interface in rotator cuff repairs (RCRs). We conducted a study of cyclic and ultimate failure properties of PHA mesh-augmented single-row RCRs and nonaugmented RCRs. Eight pairs of fresh-frozen cadaver humeri (6 male, 2 female) were tested. Mean (SD) age was 61 (9) years. The supraspinatus tendon was resected and reattached in a single-row configuration using 2 triple-loaded suture anchors and 6 simple stitches. The opposite humerus underwent RCR augmented with 2 strips of 13-mm × 23-mm PHA mesh. Humeri were mounted in an Instron load frame, cycled 1000 times to 1.0 MPa of effective stress, and loaded to failure. Construct gapping and ultimate failure loads/displacements were recorded. Paired t tests compared augmented and nonaugmented RCRs (P ≤ .05 was significant). There was no difference in gapping over 1000 cycles (P = .879). Mean (SD) failure load was higher for PHA mesh-augmented RCRs, 571 (173) N, than for nonaugmented (control) RCRs, 472 (120) N (P = .042), and failures were consistent within pairs because of tissue failure at the knots or anchor pullout. This technique for arthroscopic augmentation can be used to improve initial biomechanical repair strength in tears at risk for failure.

Guidelines for the selection of optimal glenoid augment size for moderate to severe glenohumeral osteoarthritis.

Science.gov (United States)

Sabesan, Vani; Callanan, Mark; Sharma, Vinay

2014-07-01

Total shoulder arthroplasty is technically demanding in regard to implantation of the glenoid component, especially in the setting of increased glenoid deformity and posterior glenoid wear. Augmented glenoid implants are an important and innovative option; however, there is little evidence accessible to surgeons to guide in the selection of the appropriate size augmented glenoid. Solid computer models of commercially available augmented glenoid components (+3, +5, +7) contained within the software allowed placement of the best fit glenoid component within the three-dimensional reconstruct of each patient's scapula. Peg perforation, amount of bone reamed, and amount of medialization were recorded for each augment size. There was strong correlation between the medialization of the joint line and the glenoid retroversion for each augmented component at neutral correction and correction to 6° of retroversion. At neutral, the range of retroversion that restored the anatomic joint line was -3° to -17° with use of the +3 augmented glenoid, -5° to -24° with the +5 augmented glenoid, and -9° to -31° with the +7 augmented glenoid. At 6° of retroversion, the range of retroversion that restored the anatomic joint line was -4° to -21° with use of the +3 augmented glenoid, -7° to -27° with the +5 augmented glenoid, and -9° to -34° with the +7 augmented glenoid. There was a strong correlation between glenoid retroversion and medialization for all augment sizes, supporting the recommendation for glenoid retroversion as the primary guide in selecting the amount of augmentation. Copyright © 2014. Published by Mosby, Inc.

A New Hybrid Approach for Augmented Reality Maintenance in Scientific Facilities

Directory of Open Access Journals (Sweden)

Héctor Martínez

2013-09-01

Full Text Available Maintenance in scientific facilities is a difficult issue, especially in large and hazardous facilities, due to the complexity of tasks and equipment. Augmented reality is a technology that has already shown great promise in the maintenance field. With the help of augmented reality applications, maintenance tasks can be carried out faster and more safely. The problem with current applications is that they are small-scale prototypes that do not easily scale to large facility maintenance applications. This paper presents a new hybrid approach that enables the creation of augmented reality maintenance applications for large and hazardous scientific facilities. In this paper, a new augmented reality marker and the algorithm for its recognition is proposed. The performance of the algorithm is verified in three test cases, showing promising results in two of them. Improvements in robustness in the third test case in which the camera is moving quickly or when light conditions are extreme are subject to further studies. The proposed new approach will be integrated into an existing augmented reality maintenance system.

Augmented Reality Implementation in Watch Catalog as e-Marketing Based on Mobile Aplication

Science.gov (United States)

Adrianto, D.; Luwinda, F. A.; Yesmaya, V.

2017-01-01

Augmented Reality is one of important methods to provide user with a better interactive user interface. In this research, Augmented Reality in Mobile Application will be applied to provide user with useful information related with Watch Catalogue. This research will be focused on design and implementation an application using Augmented Reality. The process model used in this research is Extreme Programming. Extreme Programming have a several steps which are planning, design, coding, and testing. The result of this research is Augmented Reality application based on Android. This research will be conclude that implementation of Augmented Reality based on Android in Watch Catalogue will help customer to collect the useful information related to the specific object of watch.

The NASA Augmented/Virtual Reality Lab: The State of the Art at KSC

Science.gov (United States)

Little, William

2017-01-01

The NASA Augmented Virtual Reality (AVR) Lab at Kennedy Space Center is dedicated to the investigation of Augmented Reality (AR) and Virtual Reality (VR) technologies, with the goal of determining potential uses of these technologies as human-computer interaction (HCI) devices in an aerospace engineering context. Begun in 2012, the AVR Lab has concentrated on commercially available AR and VR devices that are gaining in popularity and use in a number of fields such as gaming, training, and telepresence. We are working with such devices as the Microsoft Kinect, the Oculus Rift, the Leap Motion, the HTC Vive, motion capture systems, and the Microsoft Hololens. The focus of our work has been on human interaction with the virtual environment, which in turn acts as a communications bridge to remote physical devices and environments which the operator cannot or should not control or experience directly. Particularly in reference to dealing with spacecraft and the oftentimes hazardous environments they inhabit, it is our hope that AR and VR technologies can be utilized to increase human safety and mission success by physically removing humans from those hazardous environments while virtually putting them right in the middle of those environments.

Proteolytically modified human beta 2-microglobulin augments the specific cytotoxic activity in murine mixed lymphocyte culture

DEFF Research Database (Denmark)

Nissen, Mogens Holst; Claësson, M H

1987-01-01

the endogenous production of interleukin 2 in the MLC culture; monoclonal antibody which reacts with both the native beta 2-m and M-beta 2-m molecule blocks the augmentation of cytotoxic T lymphocyte production induced by M-beta 2-m; murine as well as human MLC responder cells can proteolytically modify native......A proteolytically modified form of beta 2-microglobulin (beta 2-m) present in the serum of patients suffering from autoimmune, immunodeficient diseases and cancer has been reported in the literature. In the present study we show that human beta 2-m as well as the proteolytically modified human form...... (M-beta 2-m) bind to murine lymphocytes expressing H-2 class I antigens; M-beta 2-m, when added at day 0 and 1 of culture in nanomolar concentrations to a one-way murine allogeneic mixed lymphocyte culture (MLC) augments the generation of specific cytotoxic T lymphocytes; M-beta 2-m increases...

Long-term stability of contour augmentation in the esthetic zone: histologic and histomorphometric evaluation of 12 human biopsies 14 to 80 months after augmentation.

Science.gov (United States)

Jensen, Simon S; Bosshardt, Dieter D; Gruber, Reinhard; Buser, Daniel

2014-11-01

Contour augmentation around early-placed implants (Type 2 placement) using autogenous bone chips combined with deproteinized bovine bone mineral (DBBM) and a collagen barrier membrane has been documented to predictably provide esthetically satisfactory clinical outcomes. In addition, recent data from cone beam computed tomography studies have shown the augmented volume to be stable long-term. However, no human histologic data are available to document the tissue reactions to this bone augmentation procedure. Over an 8-year period, 12 biopsies were harvested 14 to 80 months after implant placement with simultaneous contour augmentation in 10 patients. The biopsies were subjected to histologic and histomorphometric analysis. The biopsies consisted of 32.0% ± 9.6% DBBM particles and 40.6% ± 14.6% mature bone. 70.3% ± 14.5% of the DBBM particle surfaces were covered with bone. On the remaining surface, multinucleated giant cells with varying intensity of tartrate-resistant acid phosphatase staining were regularly present. No signs of inflammation were visible, and no tendency toward a decreasing volume fraction of DBBM over time was observed. The present study confirms previous findings that osseointegrated DBBM particles do not tend to undergo substitution over time. This low substitution rate may be the reason behind the clinically and radiographically documented long-term stability of contour augmentation using a combination of autogenous bone chips, DBBM particles, and a collagen membrane.

Mobile Augmented Reality Supporting Marketing Strategies : using mobile's augmented reality-based marketing applications to promote products and services to end customers

OpenAIRE

Kengne, Paul

2014-01-01

Imagine a technology with which you could see more than others see, hear more than others hear and perhaps even touch, smell and taste things that others cannot. Augmented Reality (AR) is this technology to create a “next generation, reality-based interface”. This thesis explores the augmented reality technology as a whole while presenting its potentials to SMEs for an adoption to support their marketing strategies. The research was conducted qualitatively, and it is solution centric in ...

Cranial implant design using augmented reality immersive system.

Science.gov (United States)

Ai, Zhuming; Evenhouse, Ray; Leigh, Jason; Charbel, Fady; Rasmussen, Mary

2007-01-01

Software tools that utilize haptics for sculpting precise fitting cranial implants are utilized in an augmented reality immersive system to create a virtual working environment for the modelers. The virtual environment is designed to mimic the traditional working environment as closely as possible, providing more functionality for the users. The implant design process uses patient CT data of a defective area. This volumetric data is displayed in an implant modeling tele-immersive augmented reality system where the modeler can build a patient specific implant that precisely fits the defect. To mimic the traditional sculpting workspace, the implant modeling augmented reality system includes stereo vision, viewer centered perspective, sense of touch, and collaboration. To achieve optimized performance, this system includes a dual-processor PC, fast volume rendering with three-dimensional texture mapping, the fast haptic rendering algorithm, and a multi-threading architecture. The system replaces the expensive and time consuming traditional sculpting steps such as physical sculpting, mold making, and defect stereolithography. This augmented reality system is part of a comprehensive tele-immersive system that includes a conference-room-sized system for tele-immersive small group consultation and an inexpensive, easily deployable networked desktop virtual reality system for surgical consultation, evaluation and collaboration. This system has been used to design patient-specific cranial implants with precise fit.

Correlation of augmented startle reflex with brainstem electrophysiological responses in Tay-Sachs disease.

Science.gov (United States)

Nakamura, Sadao; Saito, Yoshiaki; Ishiyama, Akihiko; Sugai, Kenji; Iso, Takashi; Inagaki, Masumi; Sasaki, Masayuki

2015-01-01

To clarify the evolution of an augmented startle reflex in Tay-Sachs disease and compare the temporal relationship between this reflex and brainstem evoked potentials. Clinical and electrophysiological data from 3 patients with Tay-Sachs disease were retrospectively collected. The augmented startle reflex appeared between the age of 3 and 17 months and disappeared between the age of 4 and 6 years. Analysis of brainstem auditory evoked potentials revealed that poor segregation of peak I, but not peak III, coincided with the disappearance of the augmented startle reflex. A blink reflex with markedly high amplitude was observed in a patient with an augmented startle reflex. The correlation between the augmented startle reflex and the preservation of peak I but not peak III supports the theory that the superior olivary nucleus is dispensable for this reflex. The blink reflex with high amplitudes may represent augmented excitability of reticular formation at the pontine tegmentum in Tay-Sachs disease, where the pattern generators for the augmented startle and blink reflexes may functionally overlap. Copyright © 2014 The Japanese Society of Child Neurology. Published by Elsevier B.V. All rights reserved.

International workshop on multimodal virtual and augmented reality (workshop summary)

NARCIS (Netherlands)

Hürst, W.O.; Iwai, Daisuke; Balakrishnan, Prabhakaran

2016-01-01

Virtual reality (VR) and augmented reality (AR) are expected by many to become the next wave of computing with significant impacts on our daily lives. Motivated by this, we organized a workshop on “Multimodal Virtual and Augmented Reality (MVAR)” at the 18th ACM International Conference on

Buspirone is an effective augmenting agent of serotonin selective re ...

African Journals Online (AJOL)

Results. Patients had previously failed mUltiple trials of antidepressants, often including lithium and/or thyroid augmentation, as well as, in 12 cases, electroconvulsive therapy. However, augmentation of an SSRI With buspirone led to a rapid and significant improvement in depression in. 6 of 14 (43%) patients. Conclusion.

Nonsurgical Medical Penile Girth Augmentation: Experience-Based Recommendations.

Science.gov (United States)

Oates, Jayson; Sharp, Gemma

2017-10-01

Penile augmentation is increasingly sought by men who are dissatisfied with the size and/or appearance of their penis. However, augmentation procedures are still considered to be highly controversial with no standardized recommendations reported in the medical literature and limited outcome data. Nevertheless, these procedures continue to be performed in increasing numbers in private settings. Therefore, there is a need for safe, effective, and minimally invasive procedures to be developed, evaluated, and reported in the research literature. In this article, we focus particularly on girth enhancement procedures rather than lengthening procedures as penile girth appears to be particularly important for sexual satisfaction. We discuss the advantages and disadvantages of the common techniques to date, with a focus on the minimally invasive injectable girth augmentation techniques. Based on considerable operative experience, we offer our own suggestions for patient screening, technique selection, and perioperative care. © 2017 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Fiber Optic Augmented Reality System (FOARS)

Data.gov (United States)

National Aeronautics and Space Administration — Innovation: Fiber Optics Augmented Reality System. This system in form of a mobile app interacts real time with the actual FOSS(Fiber Optics Sensing System) data and...

CityGuideTour Toruń - tourist application using augmented reality

Science.gov (United States)

Węgrzyn, Magdalena; Mościcka, Albina

2017-12-01

The aim of the article is to show the possibilities of augmented reality in the fi eld of geodesy and cartography. It discusses the concept of augmented reality, its origins and development, as well as areas of the existing applications. The practical functioning of augmented reality in the area of geodesy and cartography is presented on the example of an application developed for the tourist city of Toruń, created with the use of CityGuideTour software. The principles of developing an application and the way it operates are also discussed. As a result, a fully operational bilingual application is available free of charge on the Web.

Application results for an augmented video tracker

Science.gov (United States)

Pierce, Bill

1991-08-01

The Relay Mirror Experiment (RME) is a research program to determine the pointing accuracy and stability levels achieved when a laser beam is reflected by the RME satellite from one ground station to another. This paper reports the results of using a video tracker augmented with a quad cell signal to improve the RME ground station tracking system performance. The video tracker controls a mirror to acquire the RME satellite, and provides a robust low bandwidth tracking loop to remove line of sight (LOS) jitter. The high-passed, high-gain quad cell signal is added to the low bandwidth, low-gain video tracker signal to increase the effective tracking loop bandwidth, and significantly improves LOS disturbance rejection. The quad cell augmented video tracking system is analyzed, and the math model for the tracker is developed. A MATLAB model is then developed from this, and performance as a function of bandwidth and disturbances is given. Improvements in performance due to the addition of the video tracker and the augmentation with the quad cell are provided. Actual satellite test results are then presented and compared with the simulated results.

Augmented Reality Learning Experiences: Survey of Prototype Design and Evaluation

Science.gov (United States)

Santos, Marc Ericson C.; Chen, Angie; Taketomi, Takafumi; Yamamoto, Goshiro; Miyazaki, Jun; Kato, Hirokazu

2014-01-01

Augmented reality (AR) technology is mature for creating learning experiences for K-12 (pre-school, grade school, and high school) educational settings. We reviewed the applications intended to complement traditional curriculum materials for K-12. We found 87 research articles on augmented reality learning experiences (ARLEs) in the IEEE Xplore…

Augmentation of Cognition and Perception Through Advanced Synthetic Vision Technology

Science.gov (United States)

Prinzel, Lawrence J., III; Kramer, Lynda J.; Bailey, Randall E.; Arthur, Jarvis J.; Williams, Steve P.; McNabb, Jennifer

2005-01-01

Synthetic Vision System technology augments reality and creates a virtual visual meteorological condition that extends a pilot's cognitive and perceptual capabilities during flight operations when outside visibility is restricted. The paper describes the NASA Synthetic Vision System for commercial aviation with an emphasis on how the technology achieves Augmented Cognition objectives.

Constructing Liminal Blends in a Collaborative Augmented-Reality Learning Environment

Science.gov (United States)

Enyedy, Noel; Danish, Joshua A.; DeLiema, David

2015-01-01

In vision-based augmented-reality (AR) environments, users view the physical world through a video feed or device that "augments" the display with a graphical or informational overlay. Our goal in this manuscript is to ask "how" and "why" these new technologies create opportunities for learning. We suggest that AR is…

The augmentation algorithm and molecular phylogenetic trees

Science.gov (United States)

Holmquist, R.

1978-01-01

Moore's (1977) augmentation procedure is discussed, and it is concluded that the procedure is valid for obtaining estimates of the total number of fixed nucleotide substitutions both theoretically and in practice, for both simulated and real data, and in agreement, for experimentally dense data sets, with stochastic estimates of the divergence, provided the restrictions on codon mutability resulting from natural selection are explicitly allowed for. Tateno and Nei's (1978) critique that the augmentation procedure has a systematic bias toward overestimation of the total number of nucleotide replacements is disputed, and a data analysis suggests that ancestral sequences inferred by the method of parsimony contain a large number of incorrectly assigned nucleotides.

Human-in-the-loop evaluation of RMS Active Damping Augmentation

Science.gov (United States)

Demeo, Martha E.; Gilbert, Michael G.; Scott, Michael A.; Lepanto, Janet A.; Bains, Elizabeth M.; Jensen, Mary C.

1993-01-01

Active Damping Augmentation is the insertion of Controls-Structures Integration Technology to benefit the on-orbit performance of the Space Shuttle Remote Manipulator System. The goal is to reduce the vibration decay time of the Remote Manipulator System following normal payload maneuvers and operations. Simulation of Active Damping Augmentation was conducted in the realtime human-in-the-loop Systems Engineering Simulator at the NASA Johnson Space Center. The objective of this study was to obtain a qualitative measure of operational performance improvement from astronaut operators and to obtain supporting quantitative performance data. Sensing of vibratory motions was simulated using a three-axis accelerometer mounted at the end of the lower boom of the Remote Manipulator System. The sensed motions were used in a feedback control law to generate commands to the joint servo mechanisms which reduced the unwanted oscillations. Active damping of the Remote Manipulator System with an attached 3990 lb. payload was successfully demonstrated. Six astronaut operators examined the performance of an Active Damping Augmentation control law following single-joint and coordinated six-joint translational and rotational maneuvers. Active Damping Augmentation disturbance rejection of Orbiter thruster firings was also evaluated. Significant reductions in the dynamic response of the 3990 lb. payload were observed. Astronaut operators recommended investigation of Active Damping Augmentation benefits to heavier payloads where oscillations are a bigger problem (e.g. Space Station Freedom assembly operators).

Augmentation therapy with alpha1-antitrypsin: patterns of use and adverse events.

Science.gov (United States)

Stoller, James K; Fallat, Robert; Schluchter, Mark D; O'Brien, Ralph G; Connor, Jason T; Gross, Nicholas; O'Neil, Kevin; Sandhaus, Robert; Crystal, Ronald G

2003-05-01

To describe patterns of prescribing augmentation therapy, and types and rates of adverse events in the National Heart, Lung, and Blood Institute Registry for Individuals with Severe Deficiency of Alpha(1)-Antitrypsin. Observational cohort study with follow-up visits every 6 to 12 months for up to 7 years. The rate and dosing frequency with which Registry participants were prescribed to receive augmentation therapy by their managing physicians, and the type and frequency of adverse events, classified in two ways: severity of self-reported symptoms, and actions taken as a consequence of the symptom. Over the course of Registry follow-up, 66% (n = 747) of the participants received augmentation therapy at some time. In keeping with recommendations made in the 1989 American Thoracic Society (ATS) statement, 75% of participants with airflow obstruction at first visit (defined as FEV(1) or = 80% predicted (14%) also received augmentation therapy. Among those with COPD for whom augmentation therapy was not prescribed, financial constraints were the reported cause in 30%. Observed patterns also varied from approved practice, in that dosing frequencies other than the US Food and Drug Administration-approved, once-weekly regimen were frequently prescribed. The overall rate of reported adverse events was 0.02 per patient-month, with 83% of participants reporting no events. This overall rate was composed of 16% considered mild events, 76% moderate events, and 9% severe events. We conclude that augmentation therapy was generally well tolerated and, consistent with ATS guidelines, physicians generally did not prescribe augmentation therapy for subjects with FEV(1) > or = 80% predicted. However, the large percentage of subjects with FEV(1) <80% predicted not receiving augmentation therapy and the frequent use of 2- to 3-week or monthly dosing reflects variation of practice from suggested treatment guidelines.

[CSE vs. augmented epidural anesthesia for cesarean section. Spinal and epidural anesthesia with bupivacaine 0.5% "isobar" require augmentation].

Science.gov (United States)

Halter, F; Niesel, H C; Gladrow, W; Kaiser, H

1998-09-01

Incomplete anaesthesia is a major clinical problem both in single spinal and in single epidural anaesthesia. The clinical efficacy of epidural anaesthesia with augmentation (aEA) and combined epidural and spinal anesthesia (CSE) for cesarean section was investigated in a prospective randomized study on 45 patients. Anaesthesia extending up to Th5 was aimed for. Depending on the patient's height, epidural anaesthesia was administered with a dose of 18-22 ml 0.5% bupivacaine and spinal anaesthesia with a dose of 11-15 mg 0.5% bupivacaine. Augmentation was carried out in all cases in epidural anaesthesia, initially with 7.5 ml 1% Lidocaine with epinephrine 1:400,000, raised by 1.5 ml per missing segment. The epidural reinjection in CSE was carried out as necessary with 9.5-15 ml 1% lidocaine with epinephrine, depending on the height and difference from the segment Th5. The extension of anaesthesia achieved in epidural anaesthesia after an initial dose of 101.8 mg bupivacaine and augmenting dose of 99 mg lidocaine reached the segment Th5. The primary spinal anaesthesia dose up to 15 mg corresponding to height led to a segmental extension to a maximum of Th3 under CSE. Augmentation was necessary in 13 patients; in 5 cases because of inadequate extent of anaesthesia and 8 cases because of pain resulting from premature reversion. The augmenting dose required was 13.9 ml. Readiness for operation was attained after 19.8 min (aEA) and after 10.5 min (CSE). No patient required analgesics before delivery. The additional analgesic requirement during operation was 63.6% (aEA) and 39.1% (CSE). Taking into account pain in the area of surgery, the requirement of analgesics was 50% (aEA) vs. 17.4% (CSE). Antiemetics were required in 18.2 (aEA) and in 65.2% (CSE). The systolic blood pressure fell by 17.7% (aEA) and in 30.3% (CSE). The minimum systolic pressure was observed after 13.4 min in aEA, and after 9.5 min in CSE. The APGAR score and the umbilical pH did not show any

Use of Augmentative and Alternative Communication Systems in Preschool: teacher perceptions

Directory of Open Access Journals (Sweden)

Munique Massaro

2013-06-01

Full Text Available Augmentative and Alternative Communication Resources have proven to be helpful in the insertion of students with disabilities and complex communication needs into a variety of pedagogical activities and expand the skills and competencies of the teacher in the teaching-learning. The objective of this research was to identify the perception of teachers regarding the use of augmentative and alternative communication during an intervention program in Preschool. Participants were a special class of Preschool students with disabilities and severe communication complexity, along with their teacher and the researcher. For the development of this research, a Alternative Communication Program was applied. The teacher was provided with systematic guidance concerning language and communication. In a collaborative process, three children’s songs were selected according to the teacher’s pedagogical planning and adapted resources through Augmentative and Alternative Communication Systems. During the intervention program, assisted evaluations also took place immediately after the activities with the music. The data were collected in audio recordings. For data analysis, content analysis was carried out resulting in the outlining of themes and sub-themes. Results indicated that the teacher identified that Augmentative and Alternative Communication Systems can to facilitate expression abilities of students with disabilities; that Augmentative and Alternative Communication Systems can be used by children in Preschool; and that resources adapted through augmentative and alternative communication systems should be in accordance with the specificities of students.

Augmented kinematic feedback from haptic virtual reality for dental skill acquisition.

Science.gov (United States)

Suebnukarn, Siriwan; Haddawy, Peter; Rhienmora, Phattanapon; Jittimanee, Pannapa; Viratket, Piyanuch

2010-12-01

We have developed a haptic virtual reality system for dental skill training. In this study we examined several kinds of kinematic information about the movement provided by the system supplement knowledge of results (KR) in dental skill acquisition. The kinematic variables examined involved force utilization (F) and mirror view (M). This created three experimental conditions that received augmented kinematic feedback (F, M, FM) and one control condition that did not (KR-only). Thirty-two dental students were randomly assigned to four groups. Their task was to perform access opening on the upper first molar with the haptic virtual reality system. An acquisition session consisted of two days of ten trials of practice in which augmented kinematic feedback was provided for the appropriate experimental conditions after each trial. One week after, a retention test consisting of two trials without augmented feedback was completed. The results showed that the augmented kinematic feedback groups had larger mean performance scores than the KR-only group in Day 1 of the acquisition and retention sessions (ANOVA, p0.05). The trends in acquisition and retention sessions suggest that the augmented kinematic feedback can enhance the performance earlier in the skill acquisition and retention sessions.

What is going on in augmented reality simulation in laparoscopic surgery?

Science.gov (United States)

Botden, Sanne M B I; Jakimowicz, Jack J

2009-08-01

To prevent unnecessary errors and adverse results of laparoscopic surgery, proper training is of paramount importance. A safe way to train surgeons for laparoscopic skills is simulation. For this purpose traditional box trainers are often used, however they lack objective assessment of performance. Virtual reality laparoscopic simulators assess performance, but lack realistic haptic feedback. Augmented reality (AR) combines a virtual reality (VR) setting with real physical materials, instruments, and feedback. This article presents the current developments in augmented reality laparoscopic simulation. Pubmed searches were performed to identify articles regarding surgical simulation and augmented reality. Identified companies manufacturing an AR laparoscopic simulator received the same questionnaire referring to the features of the simulator. Seven simulators that fitted the definition of augmented reality were identified during the literature search. Five of the approached manufacturers returned a completed questionnaire, of which one simulator appeared to be VR and was therefore not applicable for this review. Several augmented reality simulators have been developed over the past few years and they are improving rapidly. We recommend the development of AR laparoscopic simulators for component tasks of procedural training. AR simulators should be implemented in current laparoscopic training curricula, in particular for laparoscopic suturing training.

Augmented-Virtual Reality: How to improve education systems

Directory of Open Access Journals (Sweden)

Manuel Fernandez

2017-06-01

Full Text Available This essay presents and discusses the developing role of virtual and augmented reality technologies in education. Addressing the challenges in adapting such technologies to focus on improving students’ learning outcomes, the author discusses the inclusion of experiential modes as a vehicle for improving students’ knowledge acquisition. Stakeholders in the educational role of technology include students, faculty members, institutions, and manufacturers. While the benefits of such technologies are still under investigation, the technology landscape offers opportunities to enhance face-to-face and online teaching, including contributions in the understanding of abstract concepts and training in real environments and situations. Barriers to technology use involve limited adoption of augmented and virtual reality technologies, and, more directly, necessary training of teachers in using such technologies within meaningful educational contexts. The author proposes a six-step methodology to aid adoption of these technologies as basic elements within the regular education: training teachers; developing conceptual prototypes; teamwork involving the teacher, a technical programmer, and an educational architect; and producing the experience, which then provides results in the subsequent two phases wherein teachers are trained to apply augmented- and virtual-reality solutions within their teaching methodology using an available subject-specific experience and then finally implementing the use of the experience in a regular subject with students. The essay concludes with discussion of the business opportunities facing virtual reality in face-to-face education as well as augmented and virtual reality in online education.

Perform light and optic experiments in Augmented Reality

Science.gov (United States)

Wozniak, Peter; Vauderwange, Oliver; Curticapean, Dan; Javahiraly, Nicolas; Israel, Kai

2015-10-01

In many scientific studies lens experiments are part of the curriculum. The conducted experiments are meant to give the students a basic understanding for the laws of optics and its applications. Most of the experiments need special hardware like e.g. an optical bench, light sources, apertures and different lens types. Therefore it is not possible for the students to conduct any of the experiments outside of the university's laboratory. Simple optical software simulators enabling the students to virtually perform lens experiments already exist, but are mostly desktop or web browser based. Augmented Reality (AR) is a special case of mediated and mixed reality concepts, where computers are used to add, subtract or modify one's perception of reality. As a result of the success and widespread availability of handheld mobile devices, like e.g. tablet computers and smartphones, mobile augmented reality applications are easy to use. Augmented reality can be easily used to visualize a simulated optical bench. The students can interactively modify properties like e.g. lens type, lens curvature, lens diameter, lens refractive index and the positions of the instruments in space. Light rays can be visualized and promote an additional understanding of the laws of optics. An AR application like this is ideally suited to prepare the actual laboratory sessions and/or recap the teaching content. The authors will present their experience with handheld augmented reality applications and their possibilities for light and optic experiments without the needs for specialized optical hardware.

Review of soft tissue augmentation in the face

Directory of Open Access Journals (Sweden)

James Newman

2009-08-01

Full Text Available James NewmanFacial Plastic Surgery, Stanford University Medical Center, Palo Alto, CAFacial Plastic Surgery, Stanford University Medical Center, Palo Alto, CA, USAAbstract: A primary pillar of facial rejuvenation is the replacement of soft tissue atrophy via a variety of augmentation techniques. The techniques can be classified into three categories, skeletal onlay grafts, subcutaneous volumizers, and dermal fillers. While onlay grafts and subcutaneous volumizers have the most persistent results, the emergence of improved dermal fillers in the past 5 years has become increasingly popular. An accurate diagnosis of the level(s of soft tissue atrophy in the face needs to be made prior to selection of the category or combination of techniques. In the younger patient, the selection of a dermal filler or combination of fillers can be adequate for treatment. A comparison of the composition and characteristics of the available dermal fillers are discussed in detail to assist the clinician in understanding the actual mechanism of soft tissue augmentation. In the more advanced aging face, a combination of the three categories may be necessary to produce optimal results. Just as dermal fillers have become more differentiated to increase their longevity, the non-injectible long-lasting implants are becoming more developed to mimic accurate viscoelastic properties of the facial soft tissues. All three classes of augmentation techniques can provide patients with very satisfactory results as part of overall facial rejuvenation.Keywords: soft tissue, dermal fillers, facial implants, facial augmentation

D3D augmented reality imaging system: proof of concept in mammography

Directory of Open Access Journals (Sweden)

Douglas DB

2016-08-01

Full Text Available David B Douglas,1 Emanuel F Petricoin,2 Lance Liotta,2 Eugene Wilson3 1Department of Radiology, Stanford University, Palo Alto, CA, 2Center for Applied Proteomics and Molecular Medicine, George Mason University, Manassas, VA, 3Department of Radiology, Fort Benning, Columbus, GA, USA Purpose: The purpose of this article is to present images from simulated breast microcalcifications and assess the pattern of the microcalcifications with a technical development called “depth 3-dimensional (D3D augmented reality”. Materials and methods: A computer, head display unit, joystick, D3D augmented reality software, and an in-house script of simulated data of breast microcalcifications in a ductal distribution were used. No patient data was used and no statistical analysis was performed. Results: The D3D augmented reality system demonstrated stereoscopic depth perception by presenting a unique image to each eye, focal point convergence, head position tracking, 3D cursor, and joystick fly-through. Conclusion: The D3D augmented reality imaging system offers image viewing with depth perception and focal point convergence. The D3D augmented reality system should be tested to determine its utility in clinical practice. Keywords: augmented reality, 3D medical imaging, radiology, depth perception

An Analysis of Engagement in a Combination Indoor/Outdoor Augmented Reality Educational Game

Science.gov (United States)

Folkestad, James; O'Shea, Patrick

2011-01-01

This paper describes the results of a qualitative analysis of video captured during a dual indoor/outdoor Augmented Reality experience. Augmented Reality is the layering of virtual information on top of the physical world. This Augmented Reality experience asked students to interact with the San Diego Museum of Art and the Botanical Gardens in San…

Long-term effects of vertical bone augmentation: a systematic review

Directory of Open Access Journals (Sweden)

Johan Anton Jochum Keestra

2016-02-01

Full Text Available ABSTRACT Extraction, periodontitis, or trauma can cause a reduction on the alveolar ridge. This could result in an insufficient alveolar bone width and height. Different techniques of vertical bone augmentation are described in literature. However, nowadays there is not enough evidence against lateral augmentation procedures to verify if these techniques are stable over a long period of time. Objective This review analyses the different techniques that are used to vertically augment the bone and evaluate if these techniques are stable over a long period of time. Material and Methods The MEDLINE-PubMed database was searched from its earliest records until December 22, 2014. The following search term was used: Alveolar Ridge augmentation [MESH]. Several journals were hand searched and some authors were contacted for additional information. The primary outcome measure that was analyzed was marginal bone level change around dental implants in the augmented sites, and the secondary outcomes were survival and success rates of dental implants placed in the augmented sites. Results The search yielded 203 abstracts. Ultimately, 90 articles were selected, describing 51 studies meeting the eligibility criteria. The marginal bone level change for the inlay technique and vertical guided bone regeneration are in agreement with the success criteria. Alveolar distraction showed more marginal bone level change after the first year of loading, and for the inlay technique very few studies were available. Conclusions Based on the available data in the current existing studies with a follow-up period of at least 4 to 5 years, one can summarize that there seems to be a trend that the onlay technique, alveolar distraction, and vertical guided bone regeneration are stable for at least 4 to 5 years.

Outcomes of rotator cuff augmentation surgery with autologous fascia lata.

Science.gov (United States)

Rosales-Varo, A P; García-Espona, M A; Roda-Murillo, O

To evaluate whether augmentation grafts using autologous fascia lata improve functional results for rotator cuff repairs and reduce the retear rate compared to those without augmentation. This is a prospective evaluation comprising 20 patients with a complete symptomatic rotator cuff tear. The operations were carried out from a superior approach performing a total cuff repair, for 10 patients we used a suture augmented with an autologous graft taken from their own fascia lata while unaugmented sutures were used for the other 10 patients. The follow-up period lasted for one year post-intervention. We measured variables for tear type, functionality and pain, both baseline and at 6 and 12-month follow ups. We evaluated retear incidence in each group as well as each group's pain and functionality response. The improved pain levels in the non-graft group evolved gradually over time. Conversely, in the group with the augmentation grafts, average Constant-Murley shoulder outcome scores at six months were already above 10 and were maintained at 12 months. One retear occurred in the graft group and 2 in the group without grafts, thus presenting no significant differences. There were no significant changes in pain and function values at the one year follow up in either group. Our preliminary results regarding rotator cuff augmentation surgery with autologous fascia lata showed a significant improvement in pain levels after 6 months compared to the patients with no augmentation, who required 12 months to reach the same values. After a year of follow up, there were no differences between the mean Constant and pain scores in either intervention group The number of retears in the non-graft group was greater than that in the group with grafts although the difference was not significant. Copyright © 2018 SECOT. Publicado por Elsevier España, S.L.U. All rights reserved.

Aplikasi Augmented Reality Magic Book Pengenalan Binatang Untuk Siswa TK

Directory of Open Access Journals (Sweden)

I Dewa Gede Wahya Dhiyatmika

2015-11-01

Full Text Available Augmented Reality is a technology combining 2 or 3 dimensional virtual objects into a real 3 dimensional environment and projected real time. Children at 5 to 7 years old, are in their golden age where they are getting more sensitive to stimulus and easier on learning new things, that they are easier on receiving new and interesting things. So, it seems to be important for children at this age to learn about living creature around them, one of it is learning about animals. Media about animal introduction for kindergarten students, such as book with 2 dimensional animal form, seems like incapable yet to excite children on learning about animal species. This Augmented Reality Magic Book Animals Introduction Application for Kindergarten Students has been developed using Android base with marker that identified 3 dimensional animal objects, their voices, and the informations about the animals using Augmented Reality Technology. Augmented Reality technology makes animal introduction to children become easier and more interesting, this application shows 3 dimensional form of animals and their voices with more innovative interface using Smartphone.

Perancangan Buku Pengenalan Hardware Komputer Dengan Augmented Reality

OpenAIRE

Kurniawan, Anang Weby; Sofyan, Amir Fatah

2012-01-01

Augmented reality is technology which combined virtual 2D and 3D object into real environment and projecting 3D virtual object in a real time. Augmented reality or AR is now happening and tend to be high progressed in a daily life. It also has a lot of innovation on the promotion media and advertisement in a business sector.One of the big points in this case is about promoting the product to the consumer in 3D catalog based on AR. As the promotion implemented in general furniture catalog whic...

Titanium Granules for Augmentation of the Maxillary Sinus

DEFF Research Database (Denmark)

Lyngstadaas, Ståle Petter; Verket, Anders; Pinholt, Else Marie

2015-01-01

BACKGROUND: Biomaterials are commonly used to augment the maxillary sinus floor prior to or in conjunction with dental implant installation. Recently, porous titanium granules (PTGs) have been used in oral implant surgery to stabilize implants and function as an osteoconductive matrix. PURPOSE...... in the study. RESULTS: One immobile implant was removed. The mean marginal bone loss was 0.5 mm and 0.8 mm, on the mesial and distal side, respectively. Histologically, all biopsies demonstrated bone ingrowth. CONCLUSIONS: The results suggest that PTG can be safely and effectively used as augmentation material...

Designing Android Based Augmented Reality Location-Based Service Application

Directory of Open Access Journals (Sweden)

Alim Hardiansyah

2018-01-01

Full Text Available Android is an operating system for Linux based smartphone. Android provides an open platform for the developers to create their own application. The most developed and used application now is location based application. This application gives personalization service for mobile device user and is customized to their location. Location based service also gives an opportunity for the developers to develop and increase the value of service. One of the technologies that could be combined with location based application is augmented reality. Augmented reality combines the virtual world with the real one. By the assistance of augmented reality, our surrounding environment could interact in digital form. Information of objects and environment surround us could be added to the augmented reality system and presented. Based on the background, the writers tried to implement those technologies on now rapidly developing android application as a final project to achieve bachelor degree in Department of Informatics Engineering, Faculty of Information Technology and Visual Communication, Al Kamal Science and Technology Institute. This application could be functioned to locate school by using location based service technology with the assistance of navigational applications such as waze and google maps, in form of live direction process through the smartphone

Construction of ontology augmented networks for protein complex prediction.

Science.gov (United States)

Zhang, Yijia; Lin, Hongfei; Yang, Zhihao; Wang, Jian

2013-01-01

Protein complexes are of great importance in understanding the principles of cellular organization and function. The increase in available protein-protein interaction data, gene ontology and other resources make it possible to develop computational methods for protein complex prediction. Most existing methods focus mainly on the topological structure of protein-protein interaction networks, and largely ignore the gene ontology annotation information. In this article, we constructed ontology augmented networks with protein-protein interaction data and gene ontology, which effectively unified the topological structure of protein-protein interaction networks and the similarity of gene ontology annotations into unified distance measures. After constructing ontology augmented networks, a novel method (clustering based on ontology augmented networks) was proposed to predict protein complexes, which was capable of taking into account the topological structure of the protein-protein interaction network, as well as the similarity of gene ontology annotations. Our method was applied to two different yeast protein-protein interaction datasets and predicted many well-known complexes. The experimental results showed that (i) ontology augmented networks and the unified distance measure can effectively combine the structure closeness and gene ontology annotation similarity; (ii) our method is valuable in predicting protein complexes and has higher F1 and accuracy compared to other competing methods.

Evaluating Augmented Reality to Complete a Chain Task for Elementary Students with Autism

Science.gov (United States)

Cihak, David F.; Moore, Eric J.; Wright, Rachel E.; McMahon, Don D.; Gibbons, Melinda M.; Smith, Cate

2016-01-01

The purpose of this study was to examine the effects of augmented reality to teach a chain task to three elementary-age students with autism spectrum disorders (ASDs). Augmented reality blends digital information within the real world. This study used a marker-based augmented reality picture prompt to trigger a video model clip of a student…

Bibliography on augmentation of convective heat and mass transfer-II

Energy Technology Data Exchange (ETDEWEB)

Bergles, A.E.; Nirmalan, V.; Junkhan, G.H.; Webb, R.L.

1983-12-01

Heat transfer augmentation has developed into a major specialty area in heat transfer research and development. This report presents and updated bibliography of world literature on augmentation. The literature is classified into passive augmentation techniques, which require no external power, and active techniques, which do require external power. The fifteen techniques are grouped in terms of their applications to the various modes of heat transfer. Mass transfer is included for completeness. Key words are included with each citation for technique/mode identification. The total number of publications cited is 3045, including 135 surveys of various techniques and 86 papers on performance evaluation of passive techniques. Patents are not included, as they are the subject of a separate bibliographic report.

Sodium bicarbonate-augmented stress thallium myocardial scintigraphy

International Nuclear Information System (INIS)

Sarin, Badal; Chugh, Pradeep Kumar; Kaushal, Dinesh; Soni, Nakse Lal; Sawroop, Kishan; Mondal, Anupam; Bhatnagar, Aseem

2004-01-01

It is well known that sodium bicarbonate in pharmacological doses induces transient alkalosis, causing intracellular transport of serum potassium. The aims of this study were (a) to investigate whether, in humans, myocardial thallium-201 uptake can be augmented by pretreatment with a single bolus of sodium bicarbonate at a pharmacological dose, (b) to verify general safety aspects of the intervention and (c) to evaluate the clinical implications of augmentation of 201 Tl uptake, if any. Routine exercise myocardial scintigraphy was performed twice in eight adult volunteers (five normal and three abnormal), once without intervention and the second time (within a week) following intravenous administration of sodium bicarbonate (88 mEq in 50 ml) as a slow bolus 1 h prior to the injection of 201 Tl. Conventional myocardial thallium study was compared with sodium bicarbonate interventional myocardial scintigraphy with respect to myocardial uptake (counts per minute per mCi injected dose), washout patterns in normal and abnormal myocardial segments, and overall clinical interpretation based on planar and single-photon emission tomographic (SPET) images. All patients remained asymptomatic after the intervention. A mean increase of 53% in myocardial uptake of thallium was noted in post-exercise acquisitions after the intervention, confirming uptake of the tracer via the potassium-hydrogen pump and its augmentation by transient alkalosis. The washout pattern remained unchanged. The visual quality of planar and SPET images improved significantly after the intervention. Out of the five abnormal myocardial segments identified in three cases, four showed significant filling-in after the intervention, causing the diagnosis to be upgraded from ''partial scar'' to ''ischaemia'', or from ''ischaemia'' to ''normal''. The overall scan impression changed in two out of three such cases. Sodium bicarbonate augmentation may have significant implications for stress-thallium scintigraphy

Oxidative defence reactions in sunflower roots induced by methyl-jasmonate and methyl-salicylate and their relation with calcium signalling.

Science.gov (United States)

Garrido, Inmaculada; Espinosa, Francisco; Alvarez-Tinaut, M Carmen

2009-10-01

Ca(2+) plays a critical role as second messenger in the signal-response coupling of plant defence responses, and methyl-jasmonate and methyl-salicylate are important components of signal transduction cascades activating plant defences. When intact axenic non-induced seedling roots of sunflower were treated with different Ca(2+) concentrations up to 1 mM, there was no significant increase in O(2)(*-) generation or DMAB-MBTH peroxidase (extracellular, ECPOX) activities in the apoplast, probably because these roots had enough Ca(2+) in their exo- and endocellular reservoirs. Both activities were strongly inhibited by the RBOH-NADPH oxidase inhibitor DPI and by the Ca(2+) surrogate antagonist La(3+), but the voltage-dependent Ca(2+) channel blocker verapamil was only inhibitory at concentrations higher than those active on animal L-type Ca(2+) channels. Concentrations >5 mM EGTA (chelating Ca(2+) in the apoplast) and Li(+) (inhibiting PI cycle dependent endogenous Ca(2+) fluxes) also inhibited both activities. W7, inhibitor of binding of Ca-CaM to its target protein, enhanced both activities, but the inactive analogue W5 showed a similar effect. Our data suggest that Ca(2+) from exocellular and, to a lesser extent, from endocellular stores is involved in oxidative activities, and that RBOH-NADPH oxidase is the main system supporting them. Ca(2+) activation of the PM cytosolic side of RBOH-NADPH oxidase is probably the key to Ca(2+) involvement in these processes. Roots induced by MeJA or MeSA showed significant enhancement of both oxidative activities, as corresponding to the oxidative burst evoked by the two phytohormones in the root apoplast. But while ECPOX activity showed a response to the effectors similar to that described above for non-induced roots, O(2)(*-) generation activity in the apoplast of induced roots was insensitive to EGTA, verapamil and Li(+), the inhibitors of exogenous and endogenous Ca(2+) fluxes; only DPI and La(3+) were inhibitory. As

Computer Augmented Learning; A Survey.

Science.gov (United States)

Kindred, J.

The report contains a description and summary of computer augmented learning devices and systems. The devices are of two general types programed instruction systems based on the teaching machines pioneered by Pressey and developed by Skinner, and the so-called "docile" systems that permit greater user-direction with the computer under student…

Intuitive Robot Tasks with Augmented Reality and Virtual Obstacles

OpenAIRE

Gaschler, Andre;Springer, Maximilian;Rickert, Markus;Knoll, Alois

2017-01-01

Today's industrial robots require expert knowledge and are not profitable for small and medium sized enterprises with their small lot sizes. It is our strong belief that more intuitive robot programming in an augmented reality robot work cell can dramatically simplify re-programming and leverage robotics technology in short production cycles. In this paper, we present a novel augmented reality system for defining virtual obstacles, specifying tool positions, and specifying robot tasks. We eva...

Usability evaluation of augmented reality user interfaces in games and personal navigation assistants

OpenAIRE

Ivanec, Zorian

2017-01-01

This paper studies heuristic usability evaluation of user interfaces. The literature review distinguishes characteristics of augmented reality and smartphones, presents heuristic evaluation, PACMAD usability model, personal navigation assistants, video games, augmented reality and J. Nielsen usability heuristics. In research part, usability heuristics of related subject fields and design guidelines are combined. Created heuristics and control questionnaire are used for evaluation of augmented...

Augmented Reality Simulations on Handheld Computers

Science.gov (United States)

Squire, Kurt; Klopfer, Eric

2007-01-01

Advancements in handheld computing, particularly its portability, social interactivity, context sensitivity, connectivity, and individuality, open new opportunities for immersive learning environments. This article articulates the pedagogical potential of augmented reality simulations in environmental engineering education by immersing students in…

14 CFR 29.672 - Stability augmentation, automatic, and power-operated systems.

Science.gov (United States)

2010-01-01

... power-operated systems. 29.672 Section 29.672 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Construction Control Systems § 29.672 Stability augmentation, automatic, and power-operated systems. If the functioning of stability augmentation or other automatic or power-operated system is necessary to show...

14 CFR 27.672 - Stability augmentation, automatic, and power-operated systems.

Science.gov (United States)

2010-01-01

... power-operated systems. 27.672 Section 27.672 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Construction Control Systems § 27.672 Stability augmentation, automatic, and power-operated systems. If the functioning of stability augmentation or other automatic or power-operated systems is necessary to show...

Implementation of augmented reality to models sultan deli

Science.gov (United States)

Syahputra, M. F.; Lumbantobing, N. P.; Siregar, B.; Rahmat, R. F.; Andayani, U.

2018-03-01

Augmented reality is a technology that can provide visualization in the form of 3D virtual model. With the utilization of augmented reality technology hence image-based modeling to produce 3D model of Sultan Deli Istana Maimun can be applied to restore photo of Sultan of Deli into three dimension model. This is due to the Sultan of Deli which is one of the important figures in the history of the development of the city of Medan is less known by the public because the image of the Sultanate of Deli is less clear and has been very long. To achieve this goal, augmented reality applications are used with image processing methodologies into 3D models through several toolkits. The output generated from this method is the visitor’s photos Maimun Palace with 3D model of Sultan Deli with the detection of markers 20-60 cm apart so as to provide convenience for the public to recognize the Sultan Deli who had ruled in Maimun Palace.

Virtual and Augmented Reality on the 5G Highway

OpenAIRE

Orlosky, Jason; Kiyokawa, Kiyoshi; Takemura, Haruo

2017-01-01

In recent years, virtual and augmented reality have begun to take advantage of the high speed capabilities of data streaming technologies and wireless networks. However, limitations like bandwidth and latency still prevent us from achieving high fidelity telepresence and collaborative virtual and augmented reality applications. Fortunately, both researchers and engineers are aware of these problems and have set out to design 5G networks to help us to move to the next generation of virtual int...

Augmented communication with haptic I/O in mobile devices

OpenAIRE

Haverinen, Laura

2012-01-01

Nonverbal communication is a very important part of face to face communication. Both explicit and implicit additions to verbal communication augment the information content of communication. Before telephones did not provide any means for adding nonverbal information to the communication, but now, as the technology has advanced, it is possible to start augmenting also the communication on the phone. Adding a haptic I/O device to a regular mobile phone opens possibilities to add value to commu...

Augmented reality assisted surgery: a urologic training tool

Science.gov (United States)

Dickey, Ryan M; Srikishen, Neel; Lipshultz, Larry I; Spiess, Philippe E; Carrion, Rafael E; Hakky, Tariq S

2016-01-01

Augmented reality is widely used in aeronautics and is a developing concept within surgery. In this pilot study, we developed an application for use on Google Glass® optical head-mounted display to train urology residents in how to place an inflatable penile prosthesis. We use the phrase Augmented Reality Assisted Surgery to describe this novel application of augmented reality in the setting of surgery. The application demonstrates the steps of the surgical procedure of inflatable penile prosthesis placement. It also contains software that allows for detection of interest points using a camera feed from the optical head-mounted display to enable faculty to interact with residents during placement of the penile prosthesis. Urology trainees and faculty who volunteered to take part in the study were given time to experience the technology in the operative or perioperative setting and asked to complete a feedback survey. From 30 total participants using a 10-point scale, educational usefulness was rated 8.6, ease of navigation was rated 7.6, likelihood to use was rated 7.4, and distraction in operating room was rated 4.9. When stratified between trainees and faculty, trainees found the technology more educationally useful, and less distracting. Overall, 81% of the participants want this technology in their residency program, and 93% see this technology in the operating room in the future. Further development of this technology is warranted before full release, and further studies are necessary to better characterize the effectiveness of Augmented Reality Assisted Surgery in urologic surgical training. PMID:26620455

Augmented reality assisted surgery: a urologic training tool.

Science.gov (United States)

Dickey, Ryan M; Srikishen, Neel; Lipshultz, Larry I; Spiess, Philippe E; Carrion, Rafael E; Hakky, Tariq S

2016-01-01

Augmented reality is widely used in aeronautics and is a developing concept within surgery. In this pilot study, we developed an application for use on Google Glass ® optical head-mounted display to train urology residents in how to place an inflatable penile prosthesis. We use the phrase Augmented Reality Assisted Surgery to describe this novel application of augmented reality in the setting of surgery. The application demonstrates the steps of the surgical procedure of inflatable penile prosthesis placement. It also contains software that allows for detection of interest points using a camera feed from the optical head-mounted display to enable faculty to interact with residents during placement of the penile prosthesis. Urology trainees and faculty who volunteered to take part in the study were given time to experience the technology in the operative or perioperative setting and asked to complete a feedback survey. From 30 total participants using a 10-point scale, educational usefulness was rated 8.6, ease of navigation was rated 7.6, likelihood to use was rated 7.4, and distraction in operating room was rated 4.9. When stratified between trainees and faculty, trainees found the technology more educationally useful, and less distracting. Overall, 81% of the participants want this technology in their residency program, and 93% see this technology in the operating room in the future. Further development of this technology is warranted before full release, and further studies are necessary to better characterize the effectiveness of Augmented Reality Assisted Surgery in urologic surgical training.

Augmented reality assisted surgery: a urologic training tool

Directory of Open Access Journals (Sweden)

Ryan M Dickey

2016-01-01

Full Text Available Augmented reality is widely used in aeronautics and is a developing concept within surgery. In this pilot study, we developed an application for use on Google Glass ® optical head-mounted display to train urology residents in how to place an inflatable penile prosthesis. We use the phrase Augmented Reality Assisted Surgery to describe this novel application of augmented reality in the setting of surgery. The application demonstrates the steps of the surgical procedure of inflatable penile prosthesis placement. It also contains software that allows for detection of interest points using a camera feed from the optical head-mounted display to enable faculty to interact with residents during placement of the penile prosthesis. Urology trainees and faculty who volunteered to take part in the study were given time to experience the technology in the operative or perioperative setting and asked to complete a feedback survey. From 30 total participants using a 10-point scale, educational usefulness was rated 8.6, ease of navigation was rated 7.6, likelihood to use was rated 7.4, and distraction in operating room was rated 4.9. When stratified between trainees and faculty, trainees found the technology more educationally useful, and less distracting. Overall, 81% of the participants want this technology in their residency program, and 93% see this technology in the operating room in the future. Further development of this technology is warranted before full release, and further studies are necessary to better characterize the effectiveness of Augmented Reality Assisted Surgery in urologic surgical training.

Augmented Versus Nonaugmented Repair of Acute Achilles Tendon Rupture: A Systematic Review and Meta-analysis.

Science.gov (United States)

Zhang, Yi-Jun; Zhang, Chi; Wang, Quan; Lin, Xiang-Jin

2017-04-01

Although simple end-to-end repair of the Achilles tendon is common, many augmented repair protocols have been implemented for acute Achilles tendon rupture. However, whether augmented repair is better than nonaugmented repair of an acute Achilles tendon rupture is still unknown. To conduct a meta-analysis to determine whether augmented surgical repair of an acute Achilles tendon rupture improved subjective patient satisfaction without an increase in rerupture rates. Secondary outcomes assessed included infections, ankle range of motion, calf muscle strength, and minor complications. Meta-analysis. A systematic literature search of peer-reviewed articles was conducted to identify all randomized controlled trials (RCTs) comparing augmented repair and nonaugmented repair for acute Achilles tendon rupture from January 1980 to August 2016 in the electronic databases of PubMed, Web of Science (SCI-E/SSCI/A&HCI), and EMBASE. The keywords (Achilles tendon rupture) AND (surg* OR operat* OR repair* OR augment* OR non-augment* OR end-to-end OR sutur*) were combined, and results were limited to human RCTs and controlled clinical trials published in the English language. Four RCTs involving 169 participants were eligible for inclusion; 83 participants were treated with augmented repair and 86 were treated with nonaugmented repair. Augmented repair led to similar responses when compared with nonaugmented repair for acute Achilles tendon rupture (93% vs 90%, respectively; P = .53). The rerupture rates showed no significant difference for augmented versus nonaugmented repair (7.2% vs 9.3%, respectively; P = .69). No differences in superficial and deep infections occurred in augmented (7 infections) and nonaugmented (8 infections) repair groups during postoperative follow-up ( P = .89). The average incisional infection rate was 8.4% with augmented repair and 9.3% with nonaugmented repair. No significant differences in other complications were found between augmented (7.2%) and

A Foreign Language Learning Application using Mobile Augmented Reality

Directory of Open Access Journals (Sweden)

Florentin-Alexandru DITA

2016-01-01

Full Text Available In this paper is described a foreign language learning application using mobile augmented reality based on gamification method and text recognition. The mobile augmented reality is a technology that extends the real world elements with 2D or 3D computer generated objects and lets the users interact with them. A Gamification system is based on different mechanisms that increase the motivation of students, due to the impact that videogames have in their emotional, cognitive and social areas. The proposed solution applies Optical Character Recognition technique, using the camera of the mobile device, in order to identify the text written on a card. The implementation combines the features of gamification system and mobile augmented reality in order to make the learning process more easy and fun. This paper aims to present the results after testing the foreign language learning application in different scenarios.

Fiia: A Model-Based Approach to Engineering Collaborative Augmented Reality

Science.gov (United States)

Wolfe, Christopher; Smith, J. David; Phillips, W. Greg; Graham, T. C. Nicholas

Augmented reality systems often involve collaboration among groups of people. While there are numerous toolkits that aid the development of such augmented reality groupware systems (e.g., ARToolkit and Groupkit), there remains an enormous gap between the specification of an AR groupware application and its implementation. In this chapter, we present Fiia, a toolkit which simplifies the development of collaborative AR applications. Developers specify the structure of their applications using the Fiia modeling language, which abstracts details of networking and provides high-level support for specifying adapters between the physical and virtual world. The Fiia.Net runtime system then maps this conceptual model to a runtime implementation. We illustrate Fiia via Raptor, an augmented reality application used to help small groups collaboratively prototype video games.

Fault Diagnosis of Nonlinear Systems Using Structured Augmented State Models

Institute of Scientific and Technical Information of China (English)

Jochen Aβfalg; Frank Allg(o)wer

2007-01-01

This paper presents an internal model approach for modeling and diagnostic functionality design for nonlinear systems operating subject to single- and multiple-faults. We therefore provide the framework of structured augmented state models. Fault characteristics are considered to be generated by dynamical exosystems that are switched via equality constraints to overcome the augmented state observability limiting the number of diagnosable faults. Based on the proposed model, the fault diagnosis problem is specified as an optimal hybrid augmented state estimation problem. Sub-optimal solutions are motivated and exemplified for the fault diagnosis of the well-known three-tank benchmark. As the considered class of fault diagnosis problems is large, the suggested approach is not only of theoretical interest but also of high practical relevance.

"Messing with the Mind: Evolutionary Challenges to Human Brain Augmentation

Directory of Open Access Journals (Sweden)

ARTHUR eSANIOTIS

2014-09-01

Full Text Available The issue of brain augmentation has received considerable scientific attention over the last two decades. A key factor to brain augmentation that has been widely overlooked are the complex evolutionary processes which have taken place in evolving the human brain to its current state of functioning. Like other bodily organs, the human brain has been subject to the forces of biological adaptation. The structure and function of the brain, is very complex and only now we are beginning to understand some of the basic concepts of cognition. Therefore, this article proposes that brain-machine interfacing and nootropics are not going to produce augmented brains because we do not understand enough about how evolutionary pressures have informed the neural networks which support human cognitive faculties.

Architecture and Key Techniques of Augmented Reality Maintenance Guiding System for Civil Aircrafts

Science.gov (United States)

hong, Zhou; Wenhua, Lu

2017-01-01

Augmented reality technology is introduced into the maintenance related field for strengthened information in real-world scenarios through integration of virtual assistant maintenance information with real-world scenarios. This can lower the difficulty of maintenance, reduce maintenance errors, and improve the maintenance efficiency and quality of civil aviation crews. Architecture of augmented reality virtual maintenance guiding system is proposed on the basis of introducing the definition of augmented reality and analyzing the characteristics of augmented reality virtual maintenance. Key techniques involved, such as standardization and organization of maintenance data, 3D registration, modeling of maintenance guidance information and virtual maintenance man-machine interaction, are elaborated emphatically, and solutions are given.

Facilitating efficient augmentation of transmission networks to connect renewable energy generation: the Australian experience

International Nuclear Information System (INIS)

Wright, Glen

2012-01-01

Australia is heavily dependent on coal for electricity generation. The Renewable Energy Target has spurred growth in the utilization of renewable energy sources, with further growth expected into the future. Australia's strongest renewable energy sources are generally distant from the transmission network in resource ‘basins’. Investment is needed to augment the transmission network to enable delivery of electricity from these sources to consumers. Considerable economies of scale flow from anticipating the connection of numerous generators in an area over time and sizing augmentations accordingly. Following a lengthy rulemaking process, the National Electricity Rules were recently amended by a new rule, designed to facilitate the construction of such efficiently sized augmentations. However, the new rule is more conservative than initially envisaged, making little substantive change to the current frameworks for augmentation and connection. This paper outlines these frameworks and the rulemaking process and identifies the key debates surrounding the rule change are identified. This paper then provides a detailed analysis of the new rule, concluding that it is defective in a number of respects and is unlikely to result in the efficient and timely augmentation of the network needed to unlock the potential of Australia's strongest renewable energy resources. - Highlights: ► Remoteness of renewable energy sources is a barrier to greater renewable energy utilization. ► Significant economies of scale flow from efficiently-sized transmission network augmentation. ► Current frameworks in Australia do not incentivise efficiently-sized network augmentations. ► The lack of property rights in an augmentation is particularly problematic. ► The new Scale Efficient Network Extensions rule is not apt to facilitate efficiently-sized network augmentations.

Combining Shape-Changing Interfaces and Spatial Augmented Reality Enables Extended Object Appearance

DEFF Research Database (Denmark)

Lindlbauer, David; Grønbæk, Jens Emil; Birk, Morten

2016-01-01

We propose combining shape-changing interfaces and spatial augmented reality for extending the space of appearances and interactions of actuated interfaces. While shape-changing interfaces can dynamically alter the physical appearance of objects, the integration of spatial augmented reality...... for increasing the realism of 3D objects such as bump mapping. This extensible framework helps us identify challenges of the two techniques and benefits of their combination. We utilize our prototype shape-changing device enriched with spatial augmented reality through projection mapping to demonstrate...... the concept. We present a novel mechanical distance-fields algorithm for real-time fitting of mechanically constrained shape-changing devices to arbitrary 3D graphics. Furthermore, we present a technique for increasing effective screen real estate for spatial augmented reality through view-dependent shape...

Maxillary sinus augmentation

Directory of Open Access Journals (Sweden)

A B Tarun Kumar

2015-01-01

Full Text Available Placing dental implants in the maxillary posterior region can be both challenging and un-nerving for a regular implant dentist who is not well versed with advanced surgical procedures. It is vital for a general dentist to understand the fundamentals of bone grafting the maxillary sinus if he/she is really committed to providing the best health care for their patients. The dental practice is seeing an increasing group of patients who are living longer, and this group of older baby boomers often has an edentulous posterior maxilla either unilateral or bilateral. When edentulous, the posterior maxilla more likely has diminished bone height, which does not allow for the placement of dental implants without creating additional bone. Through grafting the maxillary sinus, bone of ideal quality can be created (allowing for placement of dental implants, which offer many advantages over other tooth replacement modalities. The sinus graft offers the dental patient a predictable procedure of regenerating lost osseous structure in the posterior maxilla. This offers the patient many advantages for long-term success. If dentists understand these concepts, they can better educate their patients and guide them to have the procedure performed. This article outlines bone grafting of the maxillary sinus for the purpose of placing dental implants. This review will help the readers to understand the intricacies of sinus augmentation. They can relate their patient's condition with the available literature and chalk out the best treatment plan for the patient, especially by using indirect sinus augmentation procedures which are less invasive and highly successful if done using prescribed technique.

Volumetric, dashboard-mounted augmented display

Science.gov (United States)

Kessler, David; Grabowski, Christopher

2017-11-01

The optical design of a compact volumetric display for drivers is presented. The system displays a true volume image with realistic physical depth cues, such as focal accommodation, parallax and convergence. A large eyebox is achieved with a pupil expander. The windshield is used as the augmented reality combiner. A freeform windshield corrector is placed at the dashboard.

Augmentative Communication Services in the Schools.

Science.gov (United States)

Blackstone, Sarah W.

1989-01-01

The article considers current issues concerning service delivery systems and practices concerning augmentative and alternative communication (AAC) services in U.S. schools. Concerns in AAC program development are noted and service delivery models (center-based, community-based, or collaborative) are compared. (DB)

Accurate overlaying for mobile augmented reality

NARCIS (Netherlands)

Pasman, W; van der Schaaf, A; Lagendijk, RL; Jansen, F.W.

1999-01-01

Mobile augmented reality requires accurate alignment of virtual information with objects visible in the real world. We describe a system for mobile communications to be developed to meet these strict alignment criteria using a combination of computer vision. inertial tracking and low-latency

Augmented Reality: A Brand New Challenge for the Assessment and Treatment of Psychological Disorders

Science.gov (United States)

Chicchi Giglioli, Irene Alice; Pedroli, Elisa

2015-01-01

Augmented Reality is a new technological system that allows introducing virtual contents in the real world in order to run in the same representation and, in real time, enhancing the user's sensory perception of reality. From another point of view, Augmented Reality can be defined as a set of techniques and tools that add information to the physical reality. To date, Augmented Reality has been used in many fields, such as medicine, entertainment, maintenance, architecture, education, and cognitive and motor rehabilitation but very few studies and applications of AR exist in clinical psychology. In the treatment of psychological disorders, Augmented Reality has given preliminary evidence to be a useful tool due to its adaptability to the patient needs and therapeutic purposes and interactivity. Another relevant factor is the quality of the user's experience in the Augmented Reality system determined from emotional engagement and sense of presence. This experience could increase the AR ecological validity in the treatment of psychological disorders. This paper reviews the recent studies on the use of Augmented Reality in the evaluation and treatment of psychological disorders, focusing on current uses of this technology and on the specific features that delineate Augmented Reality a new technique useful for psychology. PMID:26339283

Augmented Reality: A Brand New Challenge for the Assessment and Treatment of Psychological Disorders.

Science.gov (United States)

Chicchi Giglioli, Irene Alice; Pallavicini, Federica; Pedroli, Elisa; Serino, Silvia; Riva, Giuseppe

2015-01-01

Augmented Reality is a new technological system that allows introducing virtual contents in the real world in order to run in the same representation and, in real time, enhancing the user's sensory perception of reality. From another point of view, Augmented Reality can be defined as a set of techniques and tools that add information to the physical reality. To date, Augmented Reality has been used in many fields, such as medicine, entertainment, maintenance, architecture, education, and cognitive and motor rehabilitation but very few studies and applications of AR exist in clinical psychology. In the treatment of psychological disorders, Augmented Reality has given preliminary evidence to be a useful tool due to its adaptability to the patient needs and therapeutic purposes and interactivity. Another relevant factor is the quality of the user's experience in the Augmented Reality system determined from emotional engagement and sense of presence. This experience could increase the AR ecological validity in the treatment of psychological disorders. This paper reviews the recent studies on the use of Augmented Reality in the evaluation and treatment of psychological disorders, focusing on current uses of this technology and on the specific features that delineate Augmented Reality a new technique useful for psychology.

Augmented Reality: A Brand New Challenge for the Assessment and Treatment of Psychological Disorders

Directory of Open Access Journals (Sweden)

Irene Alice Chicchi Giglioli

2015-01-01

Full Text Available Augmented Reality is a new technological system that allows introducing virtual contents in the real world in order to run in the same representation and, in real time, enhancing the user’s sensory perception of reality. From another point of view, Augmented Reality can be defined as a set of techniques and tools that add information to the physical reality. To date, Augmented Reality has been used in many fields, such as medicine, entertainment, maintenance, architecture, education, and cognitive and motor rehabilitation but very few studies and applications of AR exist in clinical psychology. In the treatment of psychological disorders, Augmented Reality has given preliminary evidence to be a useful tool due to its adaptability to the patient needs and therapeutic purposes and interactivity. Another relevant factor is the quality of the user’s experience in the Augmented Reality system determined from emotional engagement and sense of presence. This experience could increase the AR ecological validity in the treatment of psychological disorders. This paper reviews the recent studies on the use of Augmented Reality in the evaluation and treatment of psychological disorders, focusing on current uses of this technology and on the specific features that delineate Augmented Reality a new technique useful for psychology.

The role of orthodontics as an auxiliary tool to lip augmentation.

Science.gov (United States)

Machado, Andre Wilson; Santos, Tarsila Carvalho dos; Araújo, Telma Martins de; Gandini, Luiz Gonzaga

2011-01-01

In recent years, facial esthetics excellence has become a major focus in health professional offices and for the public worldwide. Among the main concerns of the patients is lip augmentation, since it has been associated with beauty and youth. This procedure has been increasingly performed and studied by dermatologists and plastic surgeons. Although good outcomes for lip augmentation have been achieved with different techniques, literature shows several complications and collateral effects. This paper demonstrates, through two clinical cases, how Orthodontics may be an excellent tool to assist in lip augmentation, highlighting the need for an interdisciplinary approach to enhance a more effective strategy to achieve facial esthetics goals.

Functional Reflective Polarizer for Augmented Reality and Color Vision Deficiency

Science.gov (United States)

2016-03-03

augment reality system is relatively high as compared to a polarizing beam splitter or a conventional reflective polarizer. Such a functional reflective...brightness of the display [7]. A key component for polarization management is polarizing beam splitter (PBS). Even though the PBS has exceptional...polarizer that can be incorporated into a compact augmented reality system. The design principle of the functional reflective polarizer is explained and

Augmenting the Sound Experience at Music Festivals using Mobile Phones

DEFF Research Database (Denmark)

Larsen, Jakob Eg; Stopczynski, Arkadiusz; Larsen, Jan

2011-01-01

In this paper we describe experiments carried out at the Nibe music festival in Denmark involving the use of mobile phones to augment the participants' sound experience at the concerts. The experiments involved N=19 test participants that used a mobile phone with a headset playing back sound...... “in-the-wild” experiments augmenting the sound experience at two concerts at this music festival....

Public Interest in Breast Augmentation: Analysis and Implications of Google Trends Data.

Science.gov (United States)

Wilson, Stelios C; Daar, David A; Sinno, Sammy; Levine, Steven M

2018-06-01

Breast augmentation is the most common aesthetic surgery performed in the United States (US) annually. Analysis of Google Trends (GT) data may give plastic surgeons useful information regarding worldwide, national, and regional interest for breast augmentation and other commonly performed aesthetic surgeries. Data were collected using GT for breast augmentation and associated search terms from January 2004 to May 2017. Case volume was obtained from the American Society of Plastic Surgeons (ASPS) annual reports for the calendar year 2005-2016. Trend analysis showed that total search term volume for breast augmentation and breast implants gradually decreased worldwide and in the US over the study period while the search term boob job slowly increased. Univariate linear regression demonstrated a statistically significant positive correlation between average annual Google search volume of "breast augmentation" and the annual volume of breast augmentations performed in the US according to ASPS data (R 2  = 0.44, p = 0.018). There was no significant correlation between national volume of breast augmentations performed and search volume using the terms "breast implants" or "boob job" over time (p = 0.84 and p = 0.07, respectively). In addition, there appears to be country specific variation in interest based on time of year and peaks in interest following specific policies. To our knowledge, this is the first and only analysis of GT data in the plastic surgery literature to date. To that end, this study highlights this large and potentially powerful data set for plastic surgeons both in the US and around the world. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A novel rotational matrix and translation vector algorithm: geometric accuracy for augmented reality in oral and maxillofacial surgeries.

Science.gov (United States)

Murugesan, Yahini Prabha; Alsadoon, Abeer; Manoranjan, Paul; Prasad, P W C

2018-06-01

Augmented reality-based surgeries have not been successfully implemented in oral and maxillofacial areas due to limitations in geometric accuracy and image registration. This paper aims to improve the accuracy and depth perception of the augmented video. The proposed system consists of a rotational matrix and translation vector algorithm to reduce the geometric error and improve the depth perception by including 2 stereo cameras and a translucent mirror in the operating room. The results on the mandible/maxilla area show that the new algorithm improves the video accuracy by 0.30-0.40 mm (in terms of overlay error) and the processing rate to 10-13 frames/s compared to 7-10 frames/s in existing systems. The depth perception increased by 90-100 mm. The proposed system concentrates on reducing the geometric error. Thus, this study provides an acceptable range of accuracy with a shorter operating time, which provides surgeons with a smooth surgical flow. Copyright © 2018 John Wiley & Sons, Ltd.

Comparison of patients undergoing switching versus augmentation of antipsychotic medications during treatment for schizophrenia

Directory of Open Access Journals (Sweden)

Ascher-Svanum H

2012-03-01

Full Text Available Haya Ascher-Svanum, Alan JM Brnabic, Anthony H Lawson, Bruce J Kinon, Virginia L Stauffer, Peter D Feldman, Katarina KelinLilly Research Laboratories, Eli Lilly and Company, Lilly Corporate Center, Indianapolis, Indiana, USAAbstract: It is often difficult to determine whether a patient may best benefit by augmenting their current medication or switching them to another. This post-hoc analysis compares patients’ clinical and functional profiles at the time their antipsychotic medications were either switched or augmented. Adult outpatients receiving oral antipsychotic treatment for schizophrenia were assessed during a 12-month international observational study. Clinical and functional measures were assessed at the time of first treatment switch/augmentation (0–14 days prior and compared between Switched and Augmented patient groups. Due to low numbers of patients providing such data, interpretations are based on effect sizes. Data at the time of change were available for 87 patients: 53 Switched and 34 Augmented. Inadequate response was the primary reason for treatment change in both groups, whereas lack of adherence was more prevalent in the Switched group (26.4% vs 8.8%. Changes in clinical severity from study initiation to medication change were similar, as indicated by Clinical Global Impressions–Severity scores. However, physical and mental component scores of the 12-item Short-Form Health Survey improved in the Augmented group, but worsened in the Switched group. These findings suggest that the patient’s worsening or lack of meaningful improvement prompts clinicians to switch antipsychotic medications, whereas when patients show some improvement, clinicians may be more likely to try bolstering the improvements through augmentation. Current findings are consistent with physicians’ stated reasons for switching versus augmenting antipsychotics in the treatment of schizophrenia. Confirmation of these findings requires further research

AUGMENTED REALITY AS A TEACHING TOOL IN HIGHER EDUCATION

Directory of Open Access Journals (Sweden)

Tashko Rizov

2015-06-01

Full Text Available Rapid development of the technology has influenced its inevitable entrance in the learning processes. Teachers are often challenged to use the appropriate educational technology in the process of teaching in order to ease the learning process of students. Introducing new technology in the teaching process should utilize the new technology in any possible way in order to assist the teacher in transferring the knowledge and assist the students in grasping that knowledge. This paper should emphasize the benefits of using augmented reality in higher education, by measuring outcomes of the students which used augmented reality as a teaching tool in the courses. Results from the survey imply that students show significantly improved results in increasing the interest, understanding and interiorizing the learning material. University teachers found that using augmented reality is significantly improving the learning process of students and their teaching process in a pedagogical and technical sense. 

Usability engineering: domain analysis activities for augmented-reality systems

Science.gov (United States)

Gabbard, Joseph; Swan, J. E., II; Hix, Deborah; Lanzagorta, Marco O.; Livingston, Mark; Brown, Dennis B.; Julier, Simon J.

2002-05-01

This paper discusses our usability engineering process for the Battlefield Augmented Reality System (BARS). Usability engineering is a structured, iterative, stepwise development process. Like the related disciplines of software and systems engineering, usability engineering is a combination of management principals and techniques, formal and semi- formal evaluation techniques, and computerized tools. BARS is an outdoor augmented reality system that displays heads- up battlefield intelligence information to a dismounted warrior. The paper discusses our general usability engineering process. We originally developed the process in the context of virtual reality applications, but in this work we are adapting the procedures to an augmented reality system. The focus of this paper is our work on domain analysis, the first activity of the usability engineering process. We describe our plans for and our progress to date on our domain analysis for BARS. We give results in terms of a specific urban battlefield use case we have designed.

Human glans penis augmentation using injectable hyaluronic acid gel.

Science.gov (United States)

Kim, J J; Kwak, T I; Jeon, B G; Cheon, J; Moon, D G

2003-12-01

Although augmentation phalloplasty is not an established procedure, some patients still need enlargement of their penis. Current penile augmentation is girth enhancement of penile body by dermofat graft. We performed this study to identify the efficacy and the patient's satisfaction of human glans penis augmentation with injectable hyaluronic acid gel. In 100 patients of subjective small penis (Group I) and 87 patients of small glans after dermofat graft (Group II), 2 cm(3) of hyaluronic acid gel was injected into the glans penis, subcutaneously. At 1 y after injection, changes of glandular diameter were measured by tapeline. Patient's visual estimation of glandular size (Gr 0-4) and patient's satisfaction (Grade (Gr) 0-4) were evaluated, respectively. Any adverse reactions were also evaluated. The mean age of patients was 42.2 (30-70) y in Group I and 42.13 (28-61) y in Group II. The maximal glandular circumference was significantly increased compared to basal circumference of 9.13+/-0.64 cm in Group I (Ppenis.

The Effect of an Augmented Reality Enhanced Mathematics Lesson on Student Achievement and Motivation

Science.gov (United States)

Estapa, Anne; Nadolny, Larysa

2015-01-01

The purpose of the study was to assess student achievement and motivation during a high school augmented reality mathematics activity focused on dimensional analysis. Included in this article is a review of the literature on the use of augmented reality in mathematics and the combination of print with augmented reality, also known as interactive…

Integration Of Sensor Orientation Data Into An Augmented Reality Technology

Directory of Open Access Journals (Sweden)

Edgaras Artemčiukas

2014-05-01

Full Text Available Currently, such microelectromechanical sensors as accelerome­ters, gyroscopes and magnetometers are the dominant sensors in mobile devices. The market of mobile devices is constantly expanding and focused on sensor integration process by adding supplementary functionality for the applications; therefore, it is possible to adapt these sensors for augmented reality technology solutions. Many augmented reality solutions are based on computer vision processing methods in order to identify and track markers or other objects. However, the main problem is chaotic environment, lighting conditions where object recognition and tracking in real-time becomes difficult and sometimes is an impossible process. This paper analyses possibilities to apply microelectromechanical sensors. Additionally, it investigates quaternion use for sensor data to estimate reliable and accurate camera orientation and represent virtual content in augmented reality technology.

Augmentative and alternative communication in adolescents with severe intellectual disability: a clinical experience.

Science.gov (United States)

Uliano, D; Falciglia, G; Del Viscio, C; Picelli, A; Gandolfi, M; Passarella, A

2010-06-01

Augmentative and alternative communication devices proved to be effective in patients with severe intellectual disability to overcome their communication impairments. In order to give a contribution for design of augmentative and alternative communication systems that better meet the needs of beginning communicators we decided to report our clinical experience about using augmentative and alternative communication in adolescents with severe intellectual disability. Five patients who underwent a long time traditional speech rehabilitation program (at least 5 years) with scant improvements in linguistic function were recruited and evaluated by means of the Vineland Adaptive Behaviour Scale before and after a three years augmentative and alternative communication intervention carried out by a multidisciplinary team. After the rehabilitative intervention patients showed an improvement in communication, daily living skills and socialization as measured by the Vineland Adaptive Behaviour Scale. Augmentative and alternative communication is an effective rehabilitation approach to people with severe intellectual disability and impairments in linguistic expression. Moreover augmentative and alternative communication is a useful tool allowing these patients to increase their social participation also enhancing their self-esteem. Our clinical experience confirmed these topics also in adolescents who underwent a long time traditional speech rehabilitation program with scant improvements, providing practical information to clinicians.

Control-Volume Analysis Of Thrust-Augmenting Ejectors

Science.gov (United States)

Drummond, Colin K.

1990-01-01

New method of analysis of transient flow in thrust-augmenting ejector based on control-volume formulation of governing equations. Considered as potential elements of propulsion subsystems of short-takeoff/vertical-landing airplanes.

Centers of Excellence Contribution to Knowledge Augmentation

International Nuclear Information System (INIS)

Mignone, O.

2016-01-01

Full text: Knowledge management is a key need of the nuclear industry to cope with the knowledge limited augmentation and the risks of knowledge loss due to a number of reasons, such as: staff attrition, organizational changes, upgraded technologies, new projects implementation, and the nuclear power evolution in recent years (i.e., post-Fukushima upgrades). This document describes the contribution of nuclear centers of excellence to knowledge augmentation. The effective implementation of nuclear centers of excellence is a key success factor for the knowledge management programme of nuclear organizations. This document, is based on a real example of operating organization approach in launching such initiative for staff knowledge augmentation and performance improvement. Eventually, any type of organizations in the nuclear sector could apply the proposed technique to reach better knowledge usage. The nuclear centers of excellence are a key knowledge management initiative for the learning organizations that are caring about organizational intellectual capital and striving for performance improvement. The nuclear centers of excellence can be realized as a forum to exchange ideas, knowledge, information, experiences; to collect lessons learned; and to identify areas for improvement where further organizational competence building is needed. Usual realization of this initiative is going through an active staff involvement in knowledge sharing in a form of different technical communities of practice focusing on specific knowledge domains. (author

Design for Natural Breast Augmentation: The ICE Principle.

Science.gov (United States)

Mallucci, Patrick; Branford, Olivier Alexandre

2016-06-01

The authors' published studies have helped define breast beauty in outlining key parameters that contribute to breast attractiveness. The "ICE" principle puts design into practice. It is a simplified formula for inframammary fold incision planning as part of the process for determining implant selection and placement to reproduce the 45:55 ratio previously described as fundamental to natural breast appearance. The formula is as follows: implant dimensions (I) - capacity of the breast (C) = excess tissue required (E). The aim of this study was to test the accuracy of the ICE principle for producing consistent natural beautiful results in breast augmentation. A prospective analysis of 50 consecutive women undergoing primary breast augmentation by means of an inframammary fold incision with anatomical or round implants was performed. The ICE principle was applied to all cases to determine implant selection, placement, and incision position. Changes in parameters between preoperative and postoperative digital clinical photographs were analyzed. The mean upper pole-to-lower pole ratio changed from 52:48 preoperatively to 45:55 postoperatively (p principle for surgical planning in breast augmentation that attractive natural breasts may be achieved consistently and with precision. Therapeutic, IV.

Visual error augmentation enhances learning in three dimensions.

Science.gov (United States)

Sharp, Ian; Huang, Felix; Patton, James

2011-09-02

Because recent preliminary evidence points to the use of Error augmentation (EA) for motor learning enhancements, we visually enhanced deviations from a straight line path while subjects practiced a sensorimotor reversal task, similar to laparoscopic surgery. Our study asked 10 healthy subjects in two groups to perform targeted reaching in a simulated virtual reality environment, where the transformation of the hand position matrix was a complete reversal--rotated 180 degrees about an arbitrary axis (hence 2 of the 3 coordinates are reversed). Our data showed that after 500 practice trials, error-augmented-trained subjects reached the desired targets more quickly and with lower error (differences of 0.4 seconds and 0.5 cm Maximum Perpendicular Trajectory deviation) when compared to the control group. Furthermore, the manner in which subjects practiced was influenced by the error augmentation, resulting in more continuous motions for this group and smaller errors. Even with the extreme sensory discordance of a reversal, these data further support that distorted reality can promote more complete adaptation/learning when compared to regular training. Lastly, upon removing the flip all subjects quickly returned to baseline rapidly within 6 trials.

Visual error augmentation enhances learning in three dimensions

Directory of Open Access Journals (Sweden)

Huang Felix

2011-09-01

Full Text Available Abstract Because recent preliminary evidence points to the use of Error augmentation (EA for motor learning enhancements, we visually enhanced deviations from a straight line path while subjects practiced a sensorimotor reversal task, similar to laparoscopic surgery. Our study asked 10 healthy subjects in two groups to perform targeted reaching in a simulated virtual reality environment, where the transformation of the hand position matrix was a complete reversal--rotated 180 degrees about an arbitrary axis (hence 2 of the 3 coordinates are reversed. Our data showed that after 500 practice trials, error-augmented-trained subjects reached the desired targets more quickly and with lower error (differences of 0.4 seconds and 0.5 cm Maximum Perpendicular Trajectory deviation when compared to the control group. Furthermore, the manner in which subjects practiced was influenced by the error augmentation, resulting in more continuous motions for this group and smaller errors. Even with the extreme sensory discordance of a reversal, these data further support that distorted reality can promote more complete adaptation/learning when compared to regular training. Lastly, upon removing the flip all subjects quickly returned to baseline rapidly within 6 trials.

Quantizing non-Lagrangian gauge theories: an augmentation method

International Nuclear Information System (INIS)

Lyakhovich, Simon L.; Sharapov, Alexei A.

2007-01-01

We discuss a recently proposed method of quantizing general non-Lagrangian gauge theories. The method can be implemented in many different ways, in particular, it can employ a conversion procedure that turns an original non-Lagrangian field theory in d dimensions into an equivalent Lagrangian, topological field theory in d+1 dimensions. The method involves, besides the classical equations of motion, one more geometric ingredient called the Lagrange anchor. Different Lagrange anchors result in different quantizations of one and the same classical theory. Given the classical equations of motion and Lagrange anchor as input data, a new procedure, called the augmentation, is proposed to quantize non-Lagrangian dynamics. Within the augmentation procedure, the originally non-Lagrangian theory is absorbed by a wider Lagrangian theory on the same space-time manifold. The augmented theory is not generally equivalent to the original one as it has more physical degrees of freedom than the original theory. However, the extra degrees of freedom are factorized out in a certain regular way both at classical and quantum levels. The general techniques are exemplified by quantizing two non-Lagrangian models of physical interest

PENGGUNAAN AUGMENTED REALITY UNTUK MENSIMULASIKAN DEKORASI RUANGAN SECARA REAL TIME

OpenAIRE

Ulva Erida Nur Rochmah; Aris Rakhmadi

2016-01-01

Abstrak Mendekorasi ruangan merupakan kegiatan  yang memakan banyak waktu dan tenaga, terutama jika objek yang digunakan besar dan berat. Akan merepotkan jika seseorang harus menggeser setiap objek untuk menentukan letak yang sesuai. Hal ini dapat dihindari dengan menggunakan aplikasi berbasis Augmented Reality. Augmented Reality merupakan sebuah teknologi untuk menggabungkan dunia nyata dan dunia virtual dengan cara menampilkan objek-objek virtual di dunia nyata secara real time. Tujuan uta...

Incomplete augmented Lagrangian preconditioner for steady incompressible Navier-Stokes equations.

Science.gov (United States)

Tan, Ning-Bo; Huang, Ting-Zhu; Hu, Ze-Jun

2013-01-01

An incomplete augmented Lagrangian preconditioner, for the steady incompressible Navier-Stokes equations discretized by stable finite elements, is proposed. The eigenvalues of the preconditioned matrix are analyzed. Numerical experiments show that the incomplete augmented Lagrangian-based preconditioner proposed is very robust and performs quite well by the Picard linearization or the Newton linearization over a wide range of values of the viscosity on both uniform and stretched grids.

Intercellular adhesion molecule-1 expression by skeletal muscle cells augments myogenesis

International Nuclear Information System (INIS)

Goh, Qingnian; Dearth, Christopher L.; Corbett, Jacob T.; Pierre, Philippe; Chadee, Deborah N.; Pizza, Francis X.

2015-01-01

We previously demonstrated that the expression of intercellular adhesion molecule-1 (ICAM-1) by skeletal muscle cells after muscle overload contributes to ensuing regenerative and hypertrophic processes in skeletal muscle. The objective of the present study is to reveal mechanisms through which skeletal muscle cell expression of ICAM-1 augments regenerative and hypertrophic processes of myogenesis. This was accomplished by genetically engineering C2C12 myoblasts to stably express ICAM-1, and by inhibiting the adhesive and signaling functions of ICAM-1 through the use of a neutralizing antibody or cell penetrating peptide, respectively. Expression of ICAM-1 by cultured skeletal muscle cells augmented myoblast–myoblast adhesion, myotube formation, myonuclear number, myotube alignment, myotube–myotube fusion, and myotube size without influencing the ability of myoblasts to proliferate or differentiate. ICAM-1 augmented myotube formation, myonuclear accretion, and myotube alignment through a mechanism involving adhesion-induced activation of ICAM-1 signaling, as these dependent measures were reduced via antibody and peptide inhibition of ICAM-1. The adhesive and signaling functions of ICAM-1 also facilitated myotube hypertrophy through a mechanism involving myotube–myotube fusion, protein synthesis, and Akt/p70s6k signaling. Our findings demonstrate that ICAM-1 expression by skeletal muscle cells augments myogenesis, and establish a novel mechanism through which the inflammatory response facilitates growth processes in skeletal muscle. - Highlights: • We examined mechanisms through which skeletal muscle cell expression of ICAM-1 facilitates events of in vitro myogenesis. • Expression of ICAM-1 by cultured myoblasts did not influence their ability to proliferate or differentiate. • Skeletal muscle cell expression of ICAM-1 augmented myoblast fusion, myotube alignment, myotube–myotube fusion, and myotube size. • ICAM-1 augmented myogenic processes through

Intercellular adhesion molecule-1 expression by skeletal muscle cells augments myogenesis

Energy Technology Data Exchange (ETDEWEB)

Goh, Qingnian; Dearth, Christopher L.; Corbett, Jacob T. [Department of Kinesiology, The University of Toledo, Toledo, OH (United States); Pierre, Philippe [Centre d’Immunologie de Marseille-Luminy U2M, Aix-Marseille Université, Marseille (France); INSERM U631, Institut National de la Santé et Recherche Médicale, Marseille (France); CNRS UMR6102, Centre National de la Recherche Scientifique, Marseille (France); Chadee, Deborah N. [Department of Biological Sciences, The University of Toledo, Toledo, OH (United States); Pizza, Francis X., E-mail: Francis.Pizza@utoledo.edu [Department of Kinesiology, The University of Toledo, Toledo, OH (United States)

2015-02-15

We previously demonstrated that the expression of intercellular adhesion molecule-1 (ICAM-1) by skeletal muscle cells after muscle overload contributes to ensuing regenerative and hypertrophic processes in skeletal muscle. The objective of the present study is to reveal mechanisms through which skeletal muscle cell expression of ICAM-1 augments regenerative and hypertrophic processes of myogenesis. This was accomplished by genetically engineering C2C12 myoblasts to stably express ICAM-1, and by inhibiting the adhesive and signaling functions of ICAM-1 through the use of a neutralizing antibody or cell penetrating peptide, respectively. Expression of ICAM-1 by cultured skeletal muscle cells augmented myoblast–myoblast adhesion, myotube formation, myonuclear number, myotube alignment, myotube–myotube fusion, and myotube size without influencing the ability of myoblasts to proliferate or differentiate. ICAM-1 augmented myotube formation, myonuclear accretion, and myotube alignment through a mechanism involving adhesion-induced activation of ICAM-1 signaling, as these dependent measures were reduced via antibody and peptide inhibition of ICAM-1. The adhesive and signaling functions of ICAM-1 also facilitated myotube hypertrophy through a mechanism involving myotube–myotube fusion, protein synthesis, and Akt/p70s6k signaling. Our findings demonstrate that ICAM-1 expression by skeletal muscle cells augments myogenesis, and establish a novel mechanism through which the inflammatory response facilitates growth processes in skeletal muscle. - Highlights: • We examined mechanisms through which skeletal muscle cell expression of ICAM-1 facilitates events of in vitro myogenesis. • Expression of ICAM-1 by cultured myoblasts did not influence their ability to proliferate or differentiate. • Skeletal muscle cell expression of ICAM-1 augmented myoblast fusion, myotube alignment, myotube–myotube fusion, and myotube size. • ICAM-1 augmented myogenic processes through

Design Principles for Augmented Reality Learning

Science.gov (United States)

Dunleavy, Matt

2014-01-01

Augmented reality is an emerging technology that utilizes mobile, context-aware devices (e.g., smartphones, tablets) that enable participants to interact with digital information embedded within the physical environment. This overview of design principles focuses on specific strategies that instructional designers can use to develop AR learning…

Augmentation of board games using smartphones

DEFF Research Database (Denmark)

Kulsinskas, Arturas; Balan, Catalin; Egede Bukdahl, Nicholas

2015-01-01

This paper contains details about research into the effect of digital augmentation on social presence in board games. A case study of the board game Tobago was performed during the project and a prototype application for smartphones was developed in order to compare the players’ social presence...

Augmented Reality in the environment of Heritage Building

Directory of Open Access Journals (Sweden)

Gerson José de Mattos Freire

2012-11-01

Full Text Available The placement of elements that enhance the ambiance in assets and historic sites can serve to supply evidence to a greater understanding of the events associated with these sites. The functional organization grows in importance within the historic buildings, by the need to transmit the historical context of the time and the experience associated to the experience of the place. Technical augmented reality can simplify this transmission, valuing the equity and providing them with an overview of the proposed experiments. This paper discusses the technologies available and a methodological framework for the use of Augmented Reality in the context of historical heritage.

Sodium bicarbonate-augmented stress thallium myocardial scintigraphy

Energy Technology Data Exchange (ETDEWEB)

Sarin, Badal; Chugh, Pradeep Kumar; Kaushal, Dinesh; Soni, Nakse Lal; Sawroop, Kishan; Mondal, Anupam; Bhatnagar, Aseem [Department of Nuclear Medicine, Institute of Nuclear Medicine and Allied Sciences, Brig. S. K. Mazumdar Road, 110054, Delhi (India)

2004-04-01

It is well known that sodium bicarbonate in pharmacological doses induces transient alkalosis, causing intracellular transport of serum potassium. The aims of this study were (a) to investigate whether, in humans, myocardial thallium-201 uptake can be augmented by pretreatment with a single bolus of sodium bicarbonate at a pharmacological dose, (b) to verify general safety aspects of the intervention and (c) to evaluate the clinical implications of augmentation of {sup 201}Tl uptake, if any. Routine exercise myocardial scintigraphy was performed twice in eight adult volunteers (five normal and three abnormal), once without intervention and the second time (within a week) following intravenous administration of sodium bicarbonate (88 mEq in 50 ml) as a slow bolus 1 h prior to the injection of {sup 201}Tl. Conventional myocardial thallium study was compared with sodium bicarbonate interventional myocardial scintigraphy with respect to myocardial uptake (counts per minute per mCi injected dose), washout patterns in normal and abnormal myocardial segments, and overall clinical interpretation based on planar and single-photon emission tomographic (SPET) images. All patients remained asymptomatic after the intervention. A mean increase of 53% in myocardial uptake of thallium was noted in post-exercise acquisitions after the intervention, confirming uptake of the tracer via the potassium-hydrogen pump and its augmentation by transient alkalosis. The washout pattern remained unchanged. The visual quality of planar and SPET images improved significantly after the intervention. Out of the five abnormal myocardial segments identified in three cases, four showed significant filling-in after the intervention, causing the diagnosis to be upgraded from ''partial scar'' to ''ischaemia'', or from ''ischaemia'' to ''normal''. The overall scan impression changed in two out of three such cases. Sodium

Multiparametric MR imaging of the breast after augmentation and oncoplastic surgery

International Nuclear Information System (INIS)

Ivanov, V.; Kirova, G.

2015-01-01

Full text: Evaluation of breast lesions in patients after augmentation and oncoplastic surgery are difficult and uncertain with ultrasound and mammography. These two methods give us information of the lesions nature, but this information has low specificity. Morphologic MRI sequences enable to an exact assessment the nature of the lesions high sensitivity, but with low specificity. To enhance security in the evaluation of the lesions new series as DCE MRI, DWI and MRI proton spectroscopy have to be added. Teaching points: to learn how and when to use multiparametric MRI for evaluation of breast lesion after augmentation and oncoplastic surgery; to present the multiparametric MRI protocol for evaluation of malignant breast lesion after augmentation and oncoplastic surgery; to discuss the main signs differentiating benign from malignant breast lesions based on the features on multiparametric MR Inconclusive data from mammography, ultrasound and standard morphological MR series (T1,T2, FAT SAT) in the estimation of changes after augmentation and oncoplastic surgery require the use of multiparametric MRI analysis as a supplementary method for increasing sensitivity and specificity of breast MRI

Survey on Urban Warfare Augmented Reality

Directory of Open Access Journals (Sweden)

Xiong You

2018-01-01

Full Text Available Urban warfare has become one of the main forms of modern combat in the twenty-first century. The main reason why urban warfare results in hundreds of casualties is that the situational information of the combatant is insufficient. Accessing information via an Augmented Reality system can elevate combatants’ situational awareness to effectively improve the efficiency of decision-making and reduce the injuries. This paper begins with the concept of Urban Warfare Augmented Reality (UWAR and illuminates the objectives of developing UWAR, i.e., transparent battlefield, intuitional perception and natural interaction. Real-time outdoor registration, information presentation and natural interaction are presented as key technologies of a practical UWAR system. Then, the history and current research state of these technologies are summarized and their future developments are highlighted from three perspectives, i.e., (1 Better integration with Geographic Information System and Virtual Geographic Environment; (2 More intelligent software; (3 More powerful hardware.

Interactions between Channel Morphology and the Propagation of Coarse Sediment Augmentations Downstream from Dams

Science.gov (United States)

Gaeuman, D. A.; Dickenson, S.; Pyles, M.

2009-12-01

Gravel augmentations are being implemented in a number of streams where natural recruitment of gravel is impeded by dams. Uncertainties relevant to the management of gravel augmentations include the quantities of gravel needed to achieve habitat benefits at downstream locations and the temporal and spatial scales over which those benefits that will be realized. The solution to such questions depends to a large extent on how gravel slugs evolve as the material is transported downstream, i.e., whether the gravel translates downstream as a coherent wave or whether it tends to disperse. A number of recent studies conducted in laboratory flumes or by numerical simulation that gravels slugs tend to disperse rather than translate. However, these studies do not consider the influence of channel morphology on slug behavior. Initial monitoring results based from 2 California streams suggest that natural channel morphology suppresses slug dispersion because the gravel tends to accumulate in discrete deposition zones. Field mapping and about 200 tracer stones implanted with passive integrated transponder (PIT) tags show that gravel recruitment piles of about 80 tons each placed in Grass Valley Creek in 2007 and 2008 were deposited as 2 new bars immediately downstream. The more upstream of the 2 bars formed during the 2007 winter and spring flood season, whereas the more downstream bar did not appear until the following year. A sharp deposition front and an absence of tracers in the reaches downstream strongly suggest that none of the added gravel was transported downstream beyond the area of bar formation in either year. A relatively small proportion of the mobilized tracer particles (59%) were located following the 2007 flood season, probably due to deep burial in the newly deposited bar and to radio interference caused by the high concentration of tracers in a small area. The proportion of newly introduced or previously-located tracers that were relocated in 2009 was

Oxytocin-augmented labor and risk for autism in males.

Science.gov (United States)

Weisman, Omri; Agerbo, Esben; Carter, C Sue; Harris, James C; Uldbjerg, Niels; Henriksen, Tine B; Thygesen, Malene; Mortensen, Preben B; Leckman, James F; Dalsgaard, Søren

2015-05-01

The use of synthetic oxytocin (OT) to induce and/or augment labor and delivery is on the rise. Maternal exposure to OT during birth may have adverse effects on the infant's development, including increased risk for autism. Yet, studies that test this biologically plausible association and whether it is modified by sex are limited and show inconsistent findings. To this end, we conducted an epidemiological analysis, including all singleton live births in Denmark between 2000 and 2009 (N = 557,040), with a follow-up through 2012. A total of 2110 children in this cohort were subsequently diagnosed with autistic disorder according to the ICD-10-DCR. Augmentation of labor with OT was modestly associated with an increased risk for autism in males (HR 1.13; 95% CI, 1.00-1.26; P = 0.04), but not in females (0.99; 0.77-1.27; P=0.95). Among males exposed to OT augmentation, 560 were subsequently diagnosed with autistic disorder, and among those not exposed, 1177 met criteria for autism (incidence rate 103.2 and 81.4 per 100,000 person-years, respectively). Our findings suggest a modest association between OT-augmented labor and risk for autism in males. However, given the known benefits of using synthetic OT during labor and delivery caution is warranted when interpreting the findings. Future studies should also investigate dose-dependent effect of OT on infant's development. Copyright © 2015 Elsevier B.V. All rights reserved.

Usage of Microsoft Kinect for augmented prototyping speed-up

Directory of Open Access Journals (Sweden)

Jaromír Landa

2012-01-01

Full Text Available Physical model is a common tool for testing of the product features during the design process. This model is usually made of clay or plastic because of the modifiability of these materials. Therefore, the designer could easily adjust the model shape to enhance the look or ergonomics of the product. Nowadays, some companies use augmented reality to enhance their design process. This concept is called augmented prototyping. Common approach uses artificial markers to augment the product prototype by digital 3D models. These 3D models that are shown on the markers positions can represent e.g. car spare parts such as different lights, wheels, spoiler etc. This allows the designer interactively change the look of the physical model. Further, it is also necessary to transfer physical adjustments made on the model surface back to the computer digital model. Well-known tool for this purpose a professional 3D scanner. Nevertheless, the cost of such scanner is substantial. Therefore, we focused on different solution – a motion capture device Microsoft Kinect that is used for computer games. This article outlines a new augmented prototyping approach that directly updates the digital model during the design process using Kinect depth camera. This solution is a cost effective alternative to the professional 3D scanners. Our article describes especially how depth data can be obtained by the Kinect and also provides an evaluation of depth measurement precision.

Serum levels of interleukin 6 in schizophrenic patients during treatment augmentation with sarcosine (results of the PULSAR study).

Science.gov (United States)

Strzelecki, Dominik; Urban-Kowalczyk, Małgorzata; Wysokiński, Adam

2018-03-01

Augmentation of sarcosine, a natural inhibitor of the glycine transporter type I, normalizes glutamatergic neurotransmission, having beneficial impact on primary negative symptoms in schizophrenia and may also influence immune system and interleukin 6 (IL-6) levels. Finding a relationship between initial IL-6 serum concentrations or its changes and severity of symptoms as a result of sarcosine addition to stable antipsychotic treatment. Fifity-eight individuals with schizophrenia with predominantly negative symptoms completed a 6-month randomized, double-blind placebo-controlled prospective study. Patients received 2 g of sarcosine (n = 29) or placebo (n = 30) daily per os. We measured IL-6 levels and severity of symptoms at the beginning, after 6 weeks and 6 months. As main clinical tools, we used Positive and Negative Syndrome Scale (PANSS) and Calgary depression scale for schizophrenia (CDSS). Augmentation with sarcosine had no effect on IL-6 serum levels in all time points. We noted significant improvements in negative symptoms, general psychopathology, and total PANSS score in the sarcosine group. We found correlation of initial serum IL-6 with severity of positive symptoms and negative association between IL-6 levels reduction and positive symptoms reduction. Sarcosine does not significantly affect IL-6 concentrations but IL-6 may be involved in mechanisms related to the presence of positive symptoms. Copyright © 2018 John Wiley & Sons, Ltd.

Interactive learning environments in augmented reality technology

Directory of Open Access Journals (Sweden)

Rafał Wojciechowski

2010-01-01

Full Text Available In this paper, the problem of creation of learning environments based on augmented reality (AR is considered. The concept of AR is presented as a tool for safe and cheap experimental learning. In AR learning environments students may acquire knowledge by personally carrying out experiments on virtual objects by manipulating real objects located in real environments. In the paper, a new approach to creation of interactive educational scenarios, called Augmented Reality Interactive Scenario Modeling (ARISM, is mentioned. In this approach, the process of building learning environments is divided into three stages, each of them performed by users with different technical and domain knowledge. The ARISM approach enables teachers who are not computer science experts to create AR learning environments adapted to the needs of their students.

Implementation of augmented reality to train focus on children with s pecial needs

Science.gov (United States)

Syahputra, M. F.; Sari, P. P.; Arisandi, D.; Abdullah, D.; Napitupulu, D.; Setiawan, M. I.; Albra, W.; Asnawi; Andayani, U.

2018-03-01

Differences possessed by children with special needs such as differences in mental traits, sensory abilities, social and emotional behavior etc. of normal children causing learning and developmental barriers on children, so that requiring more specific services. Autism is one category of children with special needs who experience delays in responding to the things around him that caused by chaos in the brain work system. The tendency of autistic children who only focus on themselves makes it difficult to concentrate on one thing and easily switch when being talked. Training focus of the child can be done by giving them basic commands presented with visually appealing from the utilization of augmented reality and leap motion controller.

The effectiveness of aided augmented input techniques for persons with developmental disabilities: a systematic review.

Science.gov (United States)

Allen, Anna A; Schlosser, Ralf W; Brock, Kristofer L; Shane, Howard C

2017-09-01

When working with individuals with little or no functional speech, clinicians often recommend that communication partners use the client's augmentative and alternative communication (AAC) device when speaking to the client. This is broadly known as "augmented input" and is thought to enhance the client's learning of language form and content. The purpose of this systematic review was to determine the effects of augmented input on communication outcomes in persons with developmental disabilities and persons with childhood apraxia of speech who use aided AAC. Nineteen studies met the inclusion criteria. Each included study was reviewed in terms of participant characteristics, terminology used, symbol format, augmented input characteristics, outcomes measured, effectiveness, and study quality. Results indicate that augmented input can improve single-word vocabulary skills and expression of multi-symbol utterances; however, comprehension beyond the single word level has not been explored. Additionally, it is difficult to form conclusions about the effect of augmented input on specific diagnostic populations. Directions for future research are posited.

Face Detection for Augmented Reality Application Using Boosting-based Techniques

Directory of Open Access Journals (Sweden)

Youssef Hbali

2016-12-01

Full Text Available Augmented reality has gained an increasing research interest over the few last years. Customers requirements have become more intense and more demanding, the need of the different industries to re-adapt their products and enhance them by recent advances in the computer vision and more intelligence has become a necessary. In this work we present a marker-less augmented reality application that can be used and expanded in the e-commerce industry. We take benefit of the well known boosting techniques to train and evaluate different face detectors using the multi-block local binary features. The work purpose is to select the more relevant training parameters in order to maximize the classification accuracy. Using the resulted face detector, the position of the face will serve as a marker in the proposed augmented reality.

Augmented Reality as a Visualizing facilitator in Nursing Education

DEFF Research Database (Denmark)

Rahn, Annette; Kjærgaard, Hanne Wacher

2014-01-01

Title: Augmented Reality as a visualizing facilitator in nursing education Background: Understanding the workings of the biological human body is as complex as the body itself, and because of their complexity, the phenomena of respiration and lung anatomy pose a special problem for nursing students......’ understanding within anatomy and physiology. Aim: Against this background, the current project set out to investigate how and to what extent the application of augmented reality (AR) could help students gain a better understanding through an increased focus on contextualized visualization. The overall aim...

Reality Check: Basics of Augmented, Virtual, and Mixed Reality.

Science.gov (United States)

Brigham, Tara J

2017-01-01

Augmented, virtual, and mixed reality applications all aim to enhance a user's current experience or reality. While variations of this technology are not new, within the last few years there has been a significant increase in the number of artificial reality devices or applications available to the general public. This column will explain the difference between augmented, virtual, and mixed reality and how each application might be useful in libraries. It will also provide an overview of the concerns surrounding these different reality applications and describe how and where they are currently being used.

Augmented reality application for industrial non-destructive inspection training

Science.gov (United States)

Amza, Catalin Gheorghe; Zapciu, Aurelian; Teodorescu, Octav

2018-02-01

Such a technology - Augmented Reality (AR) has great potential of use, especially for training purposes of new operators on using expensive equipment. In this context, the paper presents an augmented reality training system developed for phased-array ultrasonic non-destructive testing (NDT) equipment. The application has been developed using Unity 5.6.0 game-engine platform integrated with Vuforia sdk toolkit for devices with Android operating system. The test results performed by several NDT operators showed good results, thus proving the potential of using the application in the industrial field.

Location-Based Learning through Augmented Reality

Science.gov (United States)

Chou, Te-Lien; Chanlin, Lih-Juan

2014-01-01

A context-aware and mixed-reality exploring tool cannot only effectively provide an information-rich environment to users, but also allows them to quickly utilize useful resources and enhance environment awareness. This study integrates Augmented Reality (AR) technology into smartphones to create a stimulating learning experience at a university…

Augmented reality for Android application development

CERN Document Server

Grubert, Jens

2013-01-01

A step-by-step tutorial-based guide aimed at giving you hands-on practical experience to develop AR applications for Android.Augmented Reality for Android Application Development is for Android mobile application developers who are familiar with Android Development Tools and deployment, JMonkeyEngine, and the Vuforia SDK.

(Re-)Examination of Multimodal Augmented Reality

NARCIS (Netherlands)

Rosa, N.E.; Werkhoven, P.J.; Hürst, W.O.

2016-01-01

The majority of augmented reality (AR) research has been concerned with visual perception, however the move towards multimodality is imminent. At the same time, there is no clear vision of what multimodal AR is. The purpose of this position paper is to consider possible ways of examining AR other

Biomechanical in vitro assessment of screw augmentation in locked plating of proximal humerus fractures.

Science.gov (United States)

Röderer, Götz; Scola, Alexander; Schmölz, Werner; Gebhard, Florian; Windolf, Markus; Hofmann-Fliri, Ladina

2013-10-01

Proximal humerus fracture fixation can be difficult because of osteoporosis making it difficult to achieve stable implant anchorage in the weak bone stock even when using locking plates. This may cause implant failure requiring revision surgery. Cement augmentation has, in principle, been shown to improve stability. The aim of this study was to investigate whether augmentation of particular screws of a locking plate aimed at a region of low bone quality is effective in improving stability in a proximal humerus fracture model. Twelve paired human humerus specimens were included. Quantitative computed tomography was performed to determine bone mineral density (BMD). Local bone quality in the direction of the six proximal screws of a standard locking plate (PHILOS, Synthes) was assessed using mechanical means (DensiProbe™). A three-part fracture model with a metaphyseal defect was simulated and fixed with the plate. Within each pair of humeri the two screws aimed at the region of the lowest bone quality according to the DensiProbe™ were augmented in a randomised manner. For augmentation, 0.5 ml of bone cement was injected in a screw with multiple outlets at its tip under fluoroscopic control. A cyclic varus-bending test with increasing upper load magnitude was performed until failure of the screw-bone fixation. The augmented group withstood significantly more load cycles. The correlation of BMD with load cycles until failure and BMD with paired difference in load cycles to failure showed that augmentation could compensate for a low BMD. The results demonstrate that augmentation of screws in locked plating in a proximal humerus fracture model is effective in improving primary stability in a cyclic varus-bending test. The augmentation of two particular screws aimed at a region of low bone quality within the humeral head was almost as effective as four screws with twice the amount of bone cement. Screw augmentation combined with a knowledge of the local bone quality

14 CFR 25.672 - Stability augmentation and automatic and power-operated systems.

Science.gov (United States)

2010-01-01

... power-operated systems. 25.672 Section 25.672 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... Construction Control Systems § 25.672 Stability augmentation and automatic and power-operated systems. If the functioning of stability augmentation or other automatic or power-operated systems is necessary to show...

Using presence to evaluate an augmented reality location aware game

OpenAIRE

McCall, Roderick; Wetzel, Richard; Löschner, Johannes; Braun, Anne-Kathrin

2011-01-01

Location-aware augmented reality games provide players with a rich and potentially unlimited range of interaction possibilities. In this paper, a study is described which uses a number of measurement techniques including questionnaires, direct observation, semi-structured interviews and video analysis to measure player’s sense of presence. The paper points to the importance of the availability of actions within augmented reality games and how this shapes their sense of presence. The findings ...

Merging Augmented Reality Based Features in Mobile Multimedia Museum Guides

OpenAIRE

Damala, Areti; Marchal, Isabelle; Houlier, Pascal

2007-01-01

International audience; Augmented Reality (AR), a computer science field considered by many as a subfield of the broader concept of Mixed Reality, could alter dramatically the way we interact not only with computers but also with the real environment surrounding us, as well as with other human beings. Augmented Reality has so far been used for applications linked with military training, medicine, maintenance, architecture and urban planning, tourism, and entertainment. This last category embr...

Automatically augmenting lifelog events using pervasively generated content from millions of people.

Science.gov (United States)

Doherty, Aiden R; Smeaton, Alan F

2010-01-01

In sensor research we take advantage of additional contextual sensor information to disambiguate potentially erroneous sensor readings or to make better informed decisions on a single sensor's output. This use of additional information reinforces, validates, semantically enriches, and augments sensed data. Lifelog data is challenging to augment, as it tracks one's life with many images including the places they go, making it non-trivial to find associated sources of information. We investigate realising the goal of pervasive user-generated content based on sensors, by augmenting passive visual lifelogs with "Web 2.0" content collected by millions of other individuals.

Is ridge preservation/augmentation at periodontally compromised extraction sockets safe? A retrospective study.

Science.gov (United States)

Kim, Jung-Ju; Ben Amara, Heithem; Schwarz, Frank; Kim, Hae-Young; Lee, Jung-Won; Wikesjö, Ulf M E; Koo, Ki-Tae

2017-10-01

This study aimed to evaluate the safety of ridge preservation/augmentation procedures when performed at compromised extraction sockets. Patients subject to ridge preservation/augmentation at periodontally compromised sockets at Seoul National University Dental Hospital (SNUDH) were evaluated in a chart review. Tooth extractions due to acute infection were not included in our study as chronically formed lesions are the only lesions that can be detected from radiographic images. If inflammatory symptoms persisted following ridge preservation/augmentation and antimicrobial and anti-inflammatory therapy, the patient was categorized as a re-infection case and implanted biomaterial removed. Of 10,060 patients subject to tooth extractions at SNUDH, 2011 through 2015, 297 cases meeting inclusion criteria were reviewed. The severity and type of lesions were not specific because extracting data was only done by radiographic images and chart records. The review identified eight patients exhibiting inflammatory symptoms that required additional antimicrobial and anti-inflammatory therapy. Within this group, re-infection occurred in two patients requiring biomaterials removal. The final safety rate for the ridge preservation/augmentation was 99.3%. None of the demographic factors, systemic conditions or choice of biomaterial affected the safety of ridge preservation/augmentation. Alveolar ridge preservation/augmentation at periodontally compromised sockets appears safe following thorough removal of infectious source. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The inertial attitude augmentation for ambiguity resolution in SF/SE-GNSS attitude determination.

Science.gov (United States)

Zhu, Jiancheng; Hu, Xiaoping; Zhang, Jingyu; Li, Tao; Wang, Jinling; Wu, Meiping

2014-06-26

The Unaided Single Frequency/Single Epoch Global Navigation Satellite System (SF/SE GNSS) model is the most challenging scenario for ambiguity resolution in the GNSS attitude determination application. To improve the performance of SF/SE-GNSS ambiguity resolution without excessive cost, the Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS-IMU) is a proper choice for the auxiliary sensor that carries out the inertial attitude augmentation. Firstly, based on the SF/SE-GNSS compass model, the Inertial Derived Baseline Vector (IDBV) is defined to connect the MEMS-IMU attitude measurement with the SF/SE-GNSS ambiguity search space, and the mechanism of inertial attitude augmentation is revealed from the perspective of geometry. Then, through the quantitative description of model strength by Ambiguity Dilution of Precision (ADOP), two ADOPs are specified for the unaided SF/SE-GNSS compass model and its inertial attitude augmentation counterparts, respectively, and a sufficient condition is proposed for augmenting the SF/SE-GNSS model strength with inertial attitude measurement. Finally, in the framework of an integer aperture estimator with fixed failure rate, the performance of SF/SE-GNSS ambiguity resolution with inertial attitude augmentation is analyzed when the model strength is varying from strong to weak. The simulation results show that, in the SF/SE-GNSS attitude determination application, MEMS-IMU can satisfy the requirements of ambiguity resolution with inertial attitude augmentation.

Augmented reality in the surgery of cerebral arteriovenous malformations: technique assessment and considerations.

Science.gov (United States)

Cabrilo, Ivan; Bijlenga, Philippe; Schaller, Karl

2014-09-01

Augmented reality technology has been used for intraoperative image guidance through the overlay of virtual images, from preoperative imaging studies, onto the real-world surgical field. Although setups based on augmented reality have been used for various neurosurgical pathologies, very few cases have been reported for the surgery of arteriovenous malformations (AVM). We present our experience with AVM surgery using a system designed for image injection of virtual images into the operating microscope's eyepiece, and discuss why augmented reality may be less appealing in this form of surgery. N = 5 patients underwent AVM resection assisted by augmented reality. Virtual three-dimensional models of patients' heads, skulls, AVM nidi, and feeder and drainage vessels were selectively segmented and injected into the microscope's eyepiece for intraoperative image guidance, and their usefulness was assessed in each case. Although the setup helped in performing tailored craniotomies, in guiding dissection and in localizing drainage veins, it did not provide the surgeon with useful information concerning feeder arteries, due to the complexity of AVM angioarchitecture. The difficulty in intraoperatively conveying useful information on feeder vessels may make augmented reality a less engaging tool in this form of surgery, and might explain its underrepresentation in the literature. Integrating an AVM's hemodynamic characteristics into the augmented rendering could make it more suited to AVM surgery.

The Inertial Attitude Augmentation for Ambiguity Resolution in SF/SE-GNSS Attitude Determination

Science.gov (United States)

Zhu, Jiancheng; Hu, Xiaoping; Zhang, Jingyu; Li, Tao; Wang, Jinling; Wu, Meiping

2014-01-01

The Unaided Single Frequency/Single Epoch Global Navigation Satellite System (SF/SE GNSS) model is the most challenging scenario for ambiguity resolution in the GNSS attitude determination application. To improve the performance of SF/SE-GNSS ambiguity resolution without excessive cost, the Micro-Electro-Mechanical System Inertial Measurement Unit (MEMS-IMU) is a proper choice for the auxiliary sensor that carries out the inertial attitude augmentation. Firstly, based on the SF/SE-GNSS compass model, the Inertial Derived Baseline Vector (IDBV) is defined to connect the MEMS-IMU attitude measurement with the SF/SE-GNSS ambiguity search space, and the mechanism of inertial attitude augmentation is revealed from the perspective of geometry. Then, through the quantitative description of model strength by Ambiguity Dilution of Precision (ADOP), two ADOPs are specified for the unaided SF/SE-GNSS compass model and its inertial attitude augmentation counterparts, respectively, and a sufficient condition is proposed for augmenting the SF/SE-GNSS model strength with inertial attitude measurement. Finally, in the framework of an integer aperture estimator with fixed failure rate, the performance of SF/SE-GNSS ambiguity resolution with inertial attitude augmentation is analyzed when the model strength is varying from strong to weak. The simulation results show that, in the SF/SE-GNSS attitude determination application, MEMS-IMU can satisfy the requirements of ambiguity resolution with inertial attitude augmentation. PMID:24971472

Feasibility Study of a Standardized Novel Animal Model for Cervical Vertebral Augmentation in Sheep Using a PTH Derivate Bioactive Material

Directory of Open Access Journals (Sweden)

Karina Klein

2014-08-01

Full Text Available Prophylactic local treatment involving percutaneous vertebral augmentation using bioactive materials is a new treatment strategy in spine surgery in humans for vertebral bodies at risk. Standardized animal models for this procedure are almost non-existent. The purpose of this study was to: (i prove the efficacy of PTH derivate bioactive materials for new bone formation; and (ii create a new, highly standardized cervical vertebral augmentation model in sheep. Three different concentrations of a modified form of parathyroid hormone (PTH covalently bound to a fibrin matrix containing strontium carbonate were used. The same matrix without PTH and shams were used as controls. The bioactive materials were locally injected. Using a ventral surgical approach, a pre-set amount of material was injected under fluoroscopic guidance into the intertrabecular space of three vertebral bodies. Intravital fluorescent dyes were used to demonstrate new bone formation. After an observation period of four months, the animals were sacrificed, and vertebral bodies were processed for µCT, histomorphometry, histology and sequential fluorescence evaluation. Enhanced localized bone activity and new bone formation in the injected area could be determined for all experimental groups in comparison to the matrix alone and sham with the highest values detected for the group with a medium concentration of PTH.

Aloqa and layar augmented reality feeds

NARCIS (Netherlands)

Ternier, Stefaan

2010-01-01

Aloqa is a service that proactively notifies the user of Point Of Interests (POIs). It runs on iPhone, blackberry and android. With this tool you can easily get directions to events, places, buildings or other places of interests. Layar builds on the same principle, but has a browser that augments

Placebo-Controlled Study of Pimozide Augmentation of Fluoxetine in Body Dysmorphic Disorder

Science.gov (United States)

Phillips, Katharine A.

2006-01-01

Objective Although body dysmorphic disorder often responds to serotonin reuptake inhibitors (SRIs), most patients do not respond or respond only partially. However, placebo-controlled studies of augmentation of SRIs have not been done. Furthermore, although 40%–50% of patients are delusional, studies of antipsychotic medications have not been done. Method Twenty-eight patients with body dysmorphic disorder or its delusional variant participated in an 8-week, placebo-controlled, double-blind, parallel-group study of pimozide augmentation of fluoxetine. Results Pimozide was not more effective than placebo: two (18.2%) of 11 subjects responded to pimozide and three (17.6%) of 17 subjects responded to placebo. There was no significant effect of baseline delusionality on endpoint severity of body dysmorphic disorder. Delusionality did not decrease significantly more with pimozide than placebo. Conclusions Pimozide augmentation of fluoxetine treatment for body dysmorphic disorder was not more effective than placebo, even in more delusional patients. Further studies of augmentation for SRIs are needed. PMID:15677604

Use of dermal fat graft for augmentation of the labia majora.

Science.gov (United States)

Salgado, Christopher J; Tang, Jennifer C; Desrosiers, Arthur E

2012-02-01

Dermal fat grafts have been utilized in plastic surgery for both reconstructive and aesthetic purposes of the face, breast, and body. There are multiple reports in the literature on the male phallus augmentation with the use of dermal fat grafts. Few reports describe female genitalia aesthetic surgery, in particular rejuvenation of the labia majora. In this report we describe an indication and use of autologous dermal fat graft for labia majora augmentation in a patient with loss of tone and volume in the labia majora. We found that this procedure is an option for labia majora augmentation and provides a stable result in volume-restoration. Copyright © 2011 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Recombinant human bone morphogenetic protein 2 in augmentation procedures: case reports.

Science.gov (United States)

Luiz, Jaques; Padovan, Luis Eduardo Marques; Claudino, Marcela

2014-01-01

To successfully rehabilitate edentulous patients using endosseous implants, there must be enough available bone. Several techniques have been proposed for augmentation of sites with insufficient bone volume. Although autogenous bone has long been considered the gold standard for such procedures, the limited availability of graft material and a high morbidity rate are potential disadvantages of this type of graft. An alternative is to use recombinant human bone morphogenetic protein 2 (rhBMP-2), which is able to support bone regeneration in the oral environment. These cases demonstrate the applicability of rhBMP-2 in maxillary sinus elevation and augmentation procedures in the maxilla to enable dental implant placement. The use of rhBMP-2 in alveolar augmentation procedures had several clinical benefits for these patients.

Comparison of the Pullout Strength of Different Pedicle Screw Designs and Augmentation Techniques in an Osteoporotic Bone Model.

Science.gov (United States)

Kiyak, Gorkem; Balikci, Tevfik; Heydar, Ahmed Majid; Bezer, Murat

2018-02-01

Mechanical study. To compare the pullout strength of different screw designs and augmentation techniques in an osteoporotic bone model. Adequate bone screw pullout strength is a common problem among osteoporotic patients. Various screw designs and augmentation techniques have been developed to improve the biomechanical characteristics of the bone-screw interface. Polyurethane blocks were used to mimic human osteoporotic cancellous bone, and six different screw designs were tested. Five standard and expandable screws without augmentation, eight expandable screws with polymethylmethacrylate (PMMA) or calcium phosphate augmentation, and distal cannulated screws with PMMA and calcium phosphate augmentation were tested. Mechanical tests were performed on 10 unused new screws of each group. Screws with or without augmentation were inserted in a block that was held in a fixture frame, and a longitudinal extraction force was applied to the screw head at a loading rate of 5 mm/min. Maximum load was recorded in a load displacement curve. The peak pullout force of all tested screws with or without augmentation was significantly greater than that of the standard pedicle screw. The greatest pullout force was observed with 40-mm expandable pedicle screws with four fins and PMMA augmentation. Augmented distal cannulated screws did not have a greater peak pullout force than nonaugmented expandable screws. PMMA augmentation provided a greater peak pullout force than calcium phosphate augmentation. Expandable pedicle screws had greater peak pullout forces than standard pedicle screws and had the advantage of augmentation with either PMMA or calcium phosphate cement. Although calcium phosphate cement is biodegradable, osteoconductive, and nonexothermic, PMMA provided a significantly greater peak pullout force. PMMA-augmented expandable 40-mm four-fin pedicle screws had the greatest peak pullout force.

Markerless client-server augmented reality system with natural features

Science.gov (United States)

Ning, Shuangning; Sang, Xinzhu; Chen, Duo

2017-10-01

A markerless client-server augmented reality system is presented. In this research, the more extensive and mature virtual reality head-mounted display is adopted to assist the implementation of augmented reality. The viewer is provided an image in front of their eyes with the head-mounted display. The front-facing camera is used to capture video signals into the workstation. The generated virtual scene is merged with the outside world information received from the camera. The integrated video is sent to the helmet display system. The distinguishing feature and novelty is to realize the augmented reality with natural features instead of marker, which address the limitations of the marker, such as only black and white, the inapplicability of different environment conditions, and particularly cannot work when the marker is partially blocked. Further, 3D stereoscopic perception of virtual animation model is achieved. The high-speed and stable socket native communication method is adopted for transmission of the key video stream data, which can reduce the calculation burden of the system.

COMBINING INDEPENDENT VISUALIZATION AND TRACKING SYSTEMS FOR AUGMENTED REALITY

Directory of Open Access Journals (Sweden)

P. Hübner

2018-05-01

Full Text Available The basic requirement for the successful deployment of a mobile augmented reality application is a reliable tracking system with high accuracy. Recently, a helmet-based inside-out tracking system which meets this demand has been proposed for self-localization in buildings. To realize an augmented reality application based on this tracking system, a display has to be added for visualization purposes. Therefore, the relative pose of this visualization platform with respect to the helmet has to be tracked. In the case of hand-held visualization platforms like smartphones or tablets, this can be achieved by means of image-based tracking methods like marker-based or model-based tracking. In this paper, we present two marker-based methods for tracking the relative pose between the helmet-based tracking system and a tablet-based visualization system. Both methods were implemented and comparatively evaluated in terms of tracking accuracy. Our results show that mobile inside-out tracking systems without integrated displays can easily be supplemented with a hand-held tablet as visualization device for augmented reality purposes.

Advances in Gingival Augmentation Techniques - A Literature Review

Directory of Open Access Journals (Sweden)

Hiral Shah

2013-01-01

Full Text Available Background: In the current practice of periodontics, clinicians are faced with the challenge of not only addressing biological and functional problems present in the periodontium but also providing therapy that results in acceptable aesthetics. The presence of mucogingival problems and gingival recession around anterior, highly visible teeth exemplifies a situation in which a treatment modality that addresses both biological and aesthetic demands is required from the therapist. A variety of soft tissue augmentation procedures directed at root coverage have been documented in the literature utilizing autogenous or allogenic soft tissue grafting or guided tissue regeneration (GTR. The purpose of this review was to assess the effectiveness of newer materials in gingival augmentation procedures.

IMPLEMENTATION OF AERONAUTICAL LOCAL SATELLITE AUGMENTATION SYSTEM

Directory of Open Access Journals (Sweden)

Stojce Ilcev

2011-03-01

Full Text Available Abstract. This paper introduces development and implementation of new Local Satellite AugmentationSystem as an integration component of the Regional Satellite Augmentation System (RSAS employingcurrent and new Satellite Communications, Navigation and Surveillance (CNS for improvement of the AirTraffic Control (ATC and Air Traffic Management (ATM and for enhancement safety systems includingtransport security and control of flights in all stages, airport approaching, landing, departures and allmovements over airport surface areas. The current first generation of the Global Navigation Satellite SystemGNSS-1 applications are represented by fundamental military solutions for Position, Velocity and Time ofthe satellite navigation and determination systems such as the US GPS and Russian GLONASS (Former-USSR requirements, respectively. The establishment of Aeronautical CNS is also discussed as a part ofGlobal Satellite Augmentation Systems of GPS and GLONASS systems integrated with existing and futureRSAS and LSAS in airports areas. Specific influence and factors related to the Comparison of the Currentand New Aeronautical CNS System including the Integration of RSAS and GNSS solutions are discussedand packet of facts is determined to maximize the new satellite Automatic Dependent Surveillance System(ADSS and Special Effects of the RSAS Networks. The possible future integration of RSAS and GNSS andthe common proposal of the satellite Surface Movement Guidance and Control are presented in thechangeless ways as of importance for future enfacements of ATC and ATM for any hypothetical airportinfrastructure.Keywords: ADSS, ATC, ATM, CNS, GSAS, LRAS, RSAS, SMGC, Special Effects of RSAS.

Implementing augmented reality for visualisation of virtual buildings using Android

OpenAIRE

Dąbrowski, Piotr Władysław

2011-01-01

The mobile phone devices are still developing and they are gaining more functionality and are able to deal with more advanced tasks. One of the technologies timidly trying to approach the mobile phone market is the augmented reality, which does no longer require external equipment to be formed in a programming application. There is a limited number of sources trying to describe the accuracy of augmented reality applications implemented on mobile devices. Within this study an application of au...

Augmented reality (AR and virtual reality (VR applied in dentistry

Directory of Open Access Journals (Sweden)

Ta-Ko Huang

2018-04-01

Full Text Available The OSCE is a reliable evaluation method to estimate the preclinical examination of dental students. The most ideal assessment for OSCE is used the augmented reality simulator to evaluate. This literature review investigated a recently developed in virtual reality (VR and augmented reality (AR starting of the dental history to the progress of the dental skill. As result of the lacking of technology, it needs to depend on other device increasing the success rate and decreasing the risk of the surgery. The development of tracking unit changed the surgical and educational way. Clinical surgery is based on mature education. VR and AR simultaneously affected the skill of the training lesson and navigation system. Widely, the VR and AR not only applied in the dental training lesson and surgery, but also improved all field in our life. Keywords: OSCE, Dental simulator, Augmented reality, Virtual reality, Dentistry

See-through 3D technology for augmented reality

Science.gov (United States)

Lee, Byoungho; Lee, Seungjae; Li, Gang; Jang, Changwon; Hong, Jong-Young

2017-06-01

Augmented reality is recently attracting a lot of attention as one of the most spotlighted next-generation technologies. In order to get toward realization of ideal augmented reality, we need to integrate 3D virtual information into real world. This integration should not be noticed by users blurring the boundary between the virtual and real worlds. Thus, ultimate device for augmented reality can reconstruct and superimpose 3D virtual information on the real world so that they are not distinguishable, which is referred to as see-through 3D technology. Here, we introduce our previous researches to combine see-through displays and 3D technologies using emerging optical combiners: holographic optical elements and index matched optical elements. Holographic optical elements are volume gratings that have angular and wavelength selectivity. Index matched optical elements are partially reflective elements using a compensation element for index matching. Using these optical combiners, we could implement see-through 3D displays based on typical methodologies including integral imaging, digital holographic displays, multi-layer displays, and retinal projection. Some of these methods are expected to be optimized and customized for head-mounted or wearable displays. We conclude with demonstration and analysis of fundamental researches for head-mounted see-through 3D displays.

Patch-augmented rotator cuff repair: influence of the patch fixation technique on primary biomechanical stability.

Science.gov (United States)

Jung, Christian; Spreiter, Gregor; Audigé, Laurent; Ferguson, Stephen J; Flury, Matthias

2016-05-01

There is an ongoing debate about the potential of patch augmentation to improve biomechanical stability and healing associated with rotator cuff repair. The biomechanical properties of three different patch-augmented rotator cuff repair techniques were assessed in vitro and compared with a standard repair. Dermal collagen patch augmentation may increase the primary stability and strength of the repaired tendon in vitro, depending on the technique used for patch application. Forty cadaveric sheep shoulders with dissected infraspinatus tendons were randomized into four groups (n = 10/group) for tendon repair using a knotless double-row suture anchor technique. A xenologous dermal extracellular matrix patch was used for augmentation in the three test groups using an "integrated", "cover", or "hybrid" technique. Tendons were preconditioned, cyclically loaded from 10 to 30 N at 1 Hz, and then loaded monotonically to failure. Biomechanical properties and the mode of failure were evaluated. Patch augmentation significantly increased the maximum load at failure by 61 % in the "cover" technique test group (225.8 N) and 51 % in the "hybrid" technique test group (211.4 N) compared with the non-augmented control group (140.2 N) (P ≤ 0.015). For the test group with "integrated" patch augmentation, the load at failure was 28 % lower (101.6 N) compared with the control group (P = 0.043). There was no significant difference in initial and linear stiffness among the four experimental groups. The most common mode of failure was tendon pullout. No anchor dislocation, patch disruption or knot breakage was observed. Additional patch augmentation with a collagen patch influences the biomechanical properties of a rotator cuff repair in a cadaveric sheep model. Primary repair stability can be significantly improved depending on the augmentation technique.

AMI: Augmented Michelson Interferometer

Science.gov (United States)

Furió, David; Hachet, Martin; Guillet, Jean-Paul; Bousquet, Bruno; Fleck, Stéphanie; Reuter, Patrick; Canioni, Lionel

2015-10-01

Experiments in optics are essential for learning and understanding physical phenomena. The problem with these experiments is that they are generally time consuming for both their construction and their maintenance, potentially dangerous through the use of laser sources, and often expensive due to high technology optical components. We propose to simulate such experiments by way of hybrid systems that exploit both spatial augmented reality and tangible interaction. In particular, we focus on one of the most popular optical experiments: the Michelson interferometer. In our approach, we target a highly interactive system where students are able to interact in real time with the Augmented Michelson Interferometer (AMI) to observe, test hypotheses and then to enhance their comprehension. Compared to a fully digital simulation, we are investigating an approach that benefits from both physical and virtual elements, and where the students experiment by manipulating 3D-printed physical replicas of optical components (e.g. lenses and mirrors). Our objective is twofold. First, we want to ensure that the students will learn with our simulator the same concepts and skills that they learn with traditional methods. Second, we hypothesis that such a system opens new opportunities to teach optics in a way that was not possible before, by manipulating concepts beyond the limits of observable physical phenomena. To reach this goal, we have built a complementary team composed of experts in the field of optics, human-computer interaction, computer graphics, sensors and actuators, and education science.

CARE: Creating Augmented Reality in Education

Science.gov (United States)

Latif, Farzana

2012-01-01

This paper explores how Augmented Reality using mobile phones can enhance teaching and learning in education. It specifically examines its application in two cases, where it is identified that the agility of mobile devices and the ability to overlay context specific resources offers opportunities to enhance learning that would not otherwise exist.…

Virtual and Augmented Reality Systems for Renal Interventions: A Systematic Review.

Science.gov (United States)

Detmer, Felicitas J; Hettig, Julian; Schindele, Daniel; Schostak, Martin; Hansen, Christian

2017-01-01

Many virtual and augmented reality systems have been proposed to support renal interventions. This paper reviews such systems employed in the treatment of renal cell carcinoma and renal stones. A systematic literature search was performed. Inclusion criteria were virtual and augmented reality systems for radical or partial nephrectomy and renal stone treatment, excluding systems solely developed or evaluated for training purposes. In total, 52 research papers were identified and analyzed. Most of the identified literature (87%) deals with systems for renal cell carcinoma treatment. About 44% of the systems have already been employed in clinical practice, but only 20% in studies with ten or more patients. Main challenges remaining for future research include the consideration of organ movement and deformation, human factor issues, and the conduction of large clinical studies. Augmented and virtual reality systems have the potential to improve safety and outcomes of renal interventions. In the last ten years, many technical advances have led to more sophisticated systems, which are already applied in clinical practice. Further research is required to cope with current limitations of virtual and augmented reality assistance in clinical environments.

Evaluation of magnetorheological fluid augmented fabric as a fragment barrier material

International Nuclear Information System (INIS)

Son, Kwon Joong; Fahrenthold, Eric P

2012-01-01

The augmentation of high strength fabrics with non-Newtonian fluids has been suggested as a means for improving the ballistic performance of fragment barrier materials widely used in fan blade containment, body armor, orbital debris shielding, and other applications. Magnetorheological (MR) fluids have attracted particular interest, in view of their controllability and proven effectiveness in a variety of damping applications. In a basic research investigation of the MR fluid augmented fabric barrier concept, the authors have fabricated MR fluid saturated Kevlar targets and measured the ballistic performance of these targets both with and without an applied magnetic field. The experimental results show that magnetization of the MR fluid does, when considered in isolation, improve the ability of the augmented fabric to absorb impact energy. However, the benefits of plastic and viscous energy dissipation in the magnetized semi-solid are more than offset by the detrimental effects of yarn lubrication associated with the fluid’s hydrocarbon carrier. An analytical model developed to assist in the interpretation of the experimental data suggests that frictional interaction of the yarns is significantly more effective than magnetorheological augmentation of the fabric in distributing projectile loads away from the point of impact. (paper)

Improved diffuser for augmenting a wind turbine

Science.gov (United States)

Foreman, K.M.; Gilbert, B.L.

A diffuser for augmenting a wind turbine having means for energizing the boundary layer at several locations along the diffuser walls is improved by the addition of a short collar extending radially outward from the outlet of the diffuser.

Automatically Augmenting Lifelog Events Using Pervasively Generated Content from Millions of People

Directory of Open Access Journals (Sweden)

Alan F. Smeaton

2010-02-01

Full Text Available In sensor research we take advantage of additional contextual sensor information to disambiguate potentially erroneous sensor readings or to make better informed decisions on a single sensor’s output. This use of additional information reinforces, validates, semantically enriches, and augments sensed data. Lifelog data is challenging to augment, as it tracks one’s life with many images including the places they go, making it non-trivial to find associated sources of information. We investigate realising the goal of pervasive user-generated content based on sensors, by augmenting passive visual lifelogs with “Web 2.0” content collected by millions of other individuals.

Glucocorticoid augmentation of prolonged exposure therapy: rationale and case report

Directory of Open Access Journals (Sweden)

Laura Pratchett

2010-12-01

Full Text Available Rationale: Prolonged exposure (PE therapy has been found to reduce symptoms of posttraumatic stress disorder (PTSD; however, it is difficult for many patients to engage fully in the obligatory retelling of their traumatic experiences. This problem is compounded by the fact that habituation and cognitive restructuring – the main mechanisms through which PE is hypothesized to work – are not instantaneous processes, and often require several weeks before the distress associated with imaginal exposure abates. Case reports: Two cases are described that respectively illustrate the use of hydrocortisone and placebo, in combination with PE, for the treatment of combat-related PTSD. Based on known effects of glucocorticoids on learning and memory performance, we hypothesized that augmentation with hydrocortisone would improve the therapeutic effects of PE by hastening “new” learning and facilitating decreases in the emotional impact of fear memories during the course of treatment. The veteran receiving hydrocortisone augmentation of PE displayed an accelerated and ultimately greater decline in PTSD symptoms than the veteran receiving placebo. Conclusions: While no general conclusion can be derived from comparison of two patients, the findings are consistent with the rationale for augmentation. These case reports support the potential for an appropriately designed and powered clinical trial to examine the efficacy of glucocorticoids in augmenting the effects of psychotherapy for PTSD.

Instrument Motion Metrics for Laparoscopic Skills Assessment in Virtual Reality and Augmented Reality.

Science.gov (United States)

Fransson, Boel A; Chen, Chi-Ya; Noyes, Julie A; Ragle, Claude A

2016-11-01

To determine the construct and concurrent validity of instrument motion metrics for laparoscopic skills assessment in virtual reality and augmented reality simulators. Evaluation study. Veterinarian students (novice, n = 14) and veterinarians (experienced, n = 11) with no or variable laparoscopic experience. Participants' minimally invasive surgery (MIS) experience was determined by hospital records of MIS procedures performed in the Teaching Hospital. Basic laparoscopic skills were assessed by 5 tasks using a physical box trainer. Each participant completed 2 tasks for assessments in each type of simulator (virtual reality: bowel handling and cutting; augmented reality: object positioning and a pericardial window model). Motion metrics such as instrument path length, angle or drift, and economy of motion of each simulator were recorded. None of the motion metrics in a virtual reality simulator showed correlation with experience, or to the basic laparoscopic skills score. All metrics in augmented reality were significantly correlated with experience (time, instrument path, and economy of movement), except for the hand dominance metric. The basic laparoscopic skills score was correlated to all performance metrics in augmented reality. The augmented reality motion metrics differed between American College of Veterinary Surgeons diplomates and residents, whereas basic laparoscopic skills score and virtual reality metrics did not. Our results provide construct validity and concurrent validity for motion analysis metrics for an augmented reality system, whereas a virtual reality system was validated only for the time score. © Copyright 2016 by The American College of Veterinary Surgeons.

Social Augmented Reality: Enhancing Context-Dependent Communication and Informal Learning at Work

Science.gov (United States)

Pejoska, Jana; Bauters, Merja; Purma, Jukka; Leinonen, Teemu

2016-01-01

Our design proposal of social augmented reality (SoAR) grows from the observed difficulties of practical applications of augmented reality (AR) in workplace learning. In our research we investigated construction workers doing physical work in the field and analyzed the data using qualitative methods in various workshops. The challenges related to…

Augmented Reality Trends in Education: A Systematic Review of Research and Applications

Science.gov (United States)

Bacca, Jorge; Baldiris, Silvia; Fabregat, Ramon; Graf, Sabine; Kinshuk

2014-01-01

In recent years, there has been an increasing interest in applying Augmented Reality (AR) to create unique educational settings. So far, however, there is a lack of review studies with focus on investigating factors such as: the uses, advantages, limitations, effectiveness, challenges and features of augmented reality in educational settings.…

Augmented reality in neurovascular surgery: feasibility and first uses in the operating room.

Science.gov (United States)

Kersten-Oertel, Marta; Gerard, Ian; Drouin, Simon; Mok, Kelvin; Sirhan, Denis; Sinclair, David S; Collins, D Louis

2015-11-01

The aim of this report is to present a prototype augmented reality (AR) intra-operative brain imaging system. We present our experience of using this new neuronavigation system in neurovascular surgery and discuss the feasibility of this technology for aneurysms, arteriovenous malformations (AVMs), and arteriovenous fistulae (AVFs). We developed an augmented reality system that uses an external camera to capture the live view of the patient on the operating room table and to merge this view with pre-operative volume-rendered vessels. We have extensively tested the system in the laboratory and have used the system in four surgical cases: one aneurysm, two AVMs and one AVF case. The developed AR neuronavigation system allows for precise patient-to-image registration and calibration of the camera, resulting in a well-aligned augmented reality view. Initial results suggest that augmented reality is useful for tailoring craniotomies, localizing vessels of interest, and planning resection corridors. Augmented reality is a promising technology for neurovascular surgery. However, for more complex anomalies such as AVMs and AVFs, better visualization techniques that allow one to distinguish between arteries and veins and determine the absolute depth of a vessel of interest are needed.

The Future of Learning and Training in Augmented Reality

Directory of Open Access Journals (Sweden)

Kangdon Lee

2012-08-01

Full Text Available Students acquire knowledge and skills through different modes of instruction that include classroom lectures with textbooks, computers, and the like. The availability and choice of learning innovation depends on the individual’s access to technologies and on the infrastructure environment of the surrounding community. In this rapidly changing society, information needs to be adopted and applied at the right time and right place to maintain efficiency in all settings. Augmented reality is one technology that dramatically shifts the timing and location of learning. This paper describes augmented reality, how it applies to learning, and its potential impact on future education.

Mobile Augmented Reality enhances indoor navigation for wheelchair users

Directory of Open Access Journals (Sweden)

Luciene Chagas de Oliveira

Full Text Available Introduction: Individuals with mobility impairments associated with lower limb disabilities often face enormous challenges to participate in routine activities and to move around various environments. For many, the use of wheelchairs is paramount to provide mobility and social inclusion. Nevertheless, they still face a number of challenges to properly function in our society. Among the many difficulties, one in particular stands out: navigating in complex internal environments (indoors. The main objective of this work is to propose an architecture based on Mobile Augmented Reality to support the development of indoor navigation systems dedicated to wheelchair users, that is also capable of recording CAD drawings of the buildings and dealing with accessibility issues for that population. Methods Overall, five main functional requirements are proposed: the ability to allow for indoor navigation by means of Mobile Augmented Reality techniques; the capacity to register and configure building CAD drawings and the position of fiducial markers, points of interest and obstacles to be avoided by the wheelchair user; the capacity to find the best route for wheelchair indoor navigation, taking stairs and other obstacles into account; allow for the visualization of virtual directional arrows in the smartphone displays; and incorporate touch or voice commands to interact with the application. The architecture is proposed as a combination of four layers: User interface; Control; Service; and Infrastructure. A proof-of-concept application was developed and tests were performed with disable volunteers operating manual and electric wheelchairs. Results The application was implemented in Java for the Android operational system. A local database was used to store the test building CAD drawings and the position of fiducial markers and points of interest. The Android Augmented Reality library was used to implement Augmented Reality and the Blender open source

Alveolar ridge augmentation by osteoinduction in rats

DEFF Research Database (Denmark)

Pinholt, E M; Bang, G; Haanaes, H R

1990-01-01

The purpose of this study was to evaluate bone substitutes for alveolar ridge augmentation by osteoinduction. Allogenic, demineralized, and lyophilized dentin and bone was tested for osteoinductive properties in order to establish an experimental model for further studies. Implantations were perf...

An Augmented Lagrangian Method for a Class of Inverse Quadratic Programming Problems

International Nuclear Information System (INIS)

Zhang Jianzhong; Zhang Liwei

2010-01-01

We consider an inverse quadratic programming (QP) problem in which the parameters in the objective function of a given QP problem are adjusted as little as possible so that a known feasible solution becomes the optimal one. We formulate this problem as a minimization problem with a positive semidefinite cone constraint and its dual is a linearly constrained semismoothly differentiable (SC 1 ) convex programming problem with fewer variables than the original one. We demonstrate the global convergence of the augmented Lagrangian method for the dual problem and prove that the convergence rate of primal iterates, generated by the augmented Lagrange method, is proportional to 1/r, and the rate of multiplier iterates is proportional to 1/√r, where r is the penalty parameter in the augmented Lagrangian. As the objective function of the dual problem is a SC 1 function involving the projection operator onto the cone of symmetrically semi-definite matrices, the analysis requires extensive tools such as the singular value decomposition of matrices, an implicit function theorem for semismooth functions, and properties of the projection operator in the symmetric-matrix space. Furthermore, the semismooth Newton method with Armijo line search is applied to solve the subproblems in the augmented Lagrange approach, which is proven to have global convergence and local quadratic rate. Finally numerical results, implemented by the augmented Lagrangian method, are reported.

Exploring the potential use of augmented reality in medical education

OpenAIRE

Orraryd, Pontus

2017-01-01

Human anatomy is traditionally taught using textbooks and dissections. With the advent of computer graphics, using 3D applications have started to see much more use in medical educations around the world. Today, technology such as Augmented Reality and Virtual Reality are on everybody’s lips, and many are now curious what we can do with this new technology. This thesis explores how Augmented Reality can be used in medical education to teach human anatomy. Two application prototypes were devel...

Augmented reality (AR) and virtual reality (VR) applied in dentistry

OpenAIRE

Ta-Ko Huang; Chi-Hsun Yang; Yu-Hsin Hsieh; Jen-Chyan Wang; Chun-Cheng Hung

2018-01-01

The OSCE is a reliable evaluation method to estimate the preclinical examination of dental students. The most ideal assessment for OSCE is used the augmented reality simulator to evaluate. This literature review investigated a recently developed in virtual reality (VR) and augmented reality (AR) starting of the dental history to the progress of the dental skill. As result of the lacking of technology, it needs to depend on other device increasing the success rate and decreasing the risk of th...

Psychometric analysis of the Melancholia Scale in trials with non-pharmacological augmentation of patients with therapy-resistant depression

DEFF Research Database (Denmark)

Bech, Per; Lauritzen, Lise; Lunde, Marianne

2014-01-01

. Patients resistant to anti-depressant medication (therapy-resistant depression) have participated in our trials with non-pharmacological augmentation. On the basis of these trials, we have evaluated to what extent the neuropsychiatric subscale of the MES (concentration difficulties, fatigability, emotional...... of transferability, we have tested item ranks across the rating weeks. RESULTS: In the Mokken analysis, the coefficient of homogeneity was above 0.40 for both the HAM-D subscale and the apathia subscale at week 4. The numerical transferability across the weeks was statistically significant (p

Aripiprazole augmentation in poor insight obsessive-compulsive disorder: a case report

Directory of Open Access Journals (Sweden)

Vinciguerra Valentina

2008-12-01

Full Text Available Abstract Background Obsessive-compulsive disorder is associated with a relevant impairment in social and interpersonal functioning and severe disability. This seems to be particularly true for the poor insight subtype, characterised by a lack of consciousness of illness and, consequently, compliance with treatment. Poor responsiveness to serotonergic drugs in poor insight obsessive-compulsive patients may also require an augmentation therapy with atypical antipsychotics. Methods We reviewed a case in which a patient with a long history of poor insight obsessive-compulsive disorder was treated with a high dosage of serotonin reuptake inhibitors. Results The treatment resulted in a poor outcome. This patient was therefore augmentated with aripiprazole. Conclusion Doctors should consider aripiprazole as a possible augmentation strategy for serotonergic poor responder obsessive-compulsive patients, but further research on these subjects is needed.

Psychotherapy augmentation through preconscious priming

Directory of Open Access Journals (Sweden)

Francois eBorgeat

2013-03-01

Full Text Available Objective: To test the hypothesis that repeated preconscious (masked priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy.Methods: Twenty social phobic patients (13 women completed a 36 weeks study beginning by 12 weeks of group behavioural therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming condition involved listening twice daily with a passive attitude to a recording of individualized formulations of appropriate cognitions and attitudes masked by music. The Control condition involved listening to an indistinguishable recording where the formulations had been replaced by random numbers. Changes in social cognitions were measured by the Social Interaction Self Statements Test (SISST.Results: Patients improved following therapy. The Priming procedure was associated with increased positive cognitions and decreased negative cognitions on the SISST while the Control procedure was not. The Priming procedure induced more cognitive change when applied immediately after the group therapy. Conclusion: An effect of priming was observed on social phobia related cognitions in the expected direction. This self administered addition to a therapy could be seen as an augmentation strategy.

Changes in Peak Airflow Measurement During Maximal Cough After Vocal Fold Augmentation in Patients With Glottic Insufficiency.

Science.gov (United States)

Dion, Gregory R; Achlatis, Efstratios; Teng, Stephanie; Fang, Yixin; Persky, Michael; Branski, Ryan C; Amin, Milan R

2017-11-01

Compromised cough effectiveness is correlated with dysphagia and aspiration. Glottic insufficiency likely yields decreased cough strength and effectiveness. Although vocal fold augmentation favorably affects voice and likely improves cough strength, few data exist to support this hypothesis. To assess whether vocal fold augmentation improves peak airflow measurements during maximal-effort cough following augmentation. This case series study was conducted in a tertiary, academic laryngology clinic. Participants included 14 consecutive individuals with glottic insufficiency due to vocal fold paralysis, which was diagnosed via videostrobolaryngoscopy as a component of routine clinical examination. All participants who chose to proceed with augmentation were considered for the study whether office-based or operative augmentation was planned. Postaugmentation data were collected only at the first follow-up visit, which was targeted for 14 days after augmentation but varied on the basis of participant availability. Data were collected from June 5, 2014, to October 1, 2015. Data analysis took place between October 2, 2015, and March 3, 2017. Peak airflow during maximal volitional cough was quantified before and after vocal fold augmentation. Participants performed maximal coughs, and peak expiratory flow during the maximal cough was captured according to American Thoracic Society guidelines. Among the 14 participants (7 men and 7 women), the mean (SD) age was 62 (18) years. Three types of injectable material were used for vocal fold augmentation: carboxymethylcellulose in 5 patients, hyaluronic acid in 5, and calcium hydroxylapatite in 4. Following augmentation, cough strength increased in 11 participants and decreased cough strength was observed in 3. Peak airflow measurements during maximal cough varied from a decrease of 40 L/min to an increase of 150 L/min following augmentation. When preaugmentation and postaugmentation peak airflow measurements were compared, the

Model reference adaptive control and adaptive stability augmentation

DEFF Research Database (Denmark)

Henningsen, Arne; Ravn, Ole

1993-01-01

A comparison of the standard concepts in MRAC design suggests that a combination of the implicit and the explicit design techniques may lead to an improvement of the overall system performance in the presence of unmodelled dynamics. Using the ideas of adaptive stability augmentation a combined...... stability augmented model reference design is proposed. By utilizing the closed-loop control error, a simple auxiliary controller is tuned, using a normalized MIT rule for the parameter adjustment. The MIT adjustment is protected against the effects of unmodelled dynamics by lowpass filtering...... of the gradient. The proposed method is verified through simulation results indicating that the method may lead to an improvement of the model reference controller in the presence of unmodelled dynamics...

Temporal Coherence Strategies for Augmented Reality Labeling

DEFF Research Database (Denmark)

Madsen, Jacob Boesen; Tatzgern, Markus; Madsen, Claus B.

2016-01-01

Temporal coherence of annotations is an important factor in augmented reality user interfaces and for information visualization. In this paper, we empirically evaluate four different techniques for annotation. Based on these findings, we follow up with subjective evaluations in a second experiment...

Learning Anatomy via Mobile Augmented Reality: Effects on Achievement and Cognitive Load

Science.gov (United States)

Küçük, Sevda; Kapakin, Samet; Göktas, Yüksel

2016-01-01

Augmented reality (AR), a new generation of technology, has attracted the attention of educators in recent years. In this study, a MagicBook was developed for a neuroanatomy topic by using mobile augmented reality (mAR) technology. This technology integrates virtual learning objects into the real world and allow users to interact with the…

Bibliography of US patents on augmentation of convective heat and mass transfer

International Nuclear Information System (INIS)

Webb, R.L.; Junkhan, G.H.; Bergles, A.E.

1980-09-01

Granted patents are an important source of information on the potential commercialization of augmented heat transfer technology. This report presents a bibliography of US patents pertinent to that technology. The total number of patents cited is 321. They are presented in three separate lists: by patent number, alphabetically by first inventor, and by augmentation techniques

Camera Based Navigation System with Augmented Reality

Directory of Open Access Journals (Sweden)

M. Marcu

2012-06-01

Full Text Available Nowadays smart mobile devices have enough processing power, memory, storage and always connected wireless communication bandwidth that makes them available for any type of application. Augmented reality (AR proposes a new type of applications that tries to enhance the real world by superimposing or combining virtual objects or computer generated information with it. In this paper we present a camera based navigation system with augmented reality integration. The proposed system aims to the following: the user points the camera of the smartphone towards a point of interest, like a building or any other place, and the application searches for relevant information about that specific place and superimposes the data over the video feed on the display. When the user moves the camera away, changing its orientation, the data changes as well, in real-time, with the proper information about the place that is now in the camera view.

Mobile computation offloading architecture for mobile augmented reality, case study: Visualization of cetacean skeleton

OpenAIRE

Belen G. Rodriguez-Santana; Amilcar Meneses Viveros; Blanca Esther Carvajal-Gamez; Diana Carolina Trejo-Osorio

2016-01-01

Augmented Reality applications can serve as teach-ing tools in different contexts of use. Augmented reality appli-cation on mobile devices can help to provide tourist information on cities or to give information on visits to museums. For example, during visits to museums of natural history, applications of augmented reality on mobile devices can be used by some visitors to interact with the skeleton of a whale. However, making rendering heavy models can be computationally infeasible on device...

The Educational Possibilities of Augmented Reality

Science.gov (United States)

Cabero, Julio; Barroso, Julio

2016-01-01

A large number of emergent technologies have been acquiring a strong impulse in recent years. One of these emergent technologies is Augmented Reality (RA), which will surely have a high level of penetration into all our educational centers, including universities, in the next 3 to 5 years, as a number of different reports have already highlighted.…

Understanding the Conics through Augmented Reality

Science.gov (United States)

Salinas, Patricia; Pulido, Ricardo

2017-01-01

This paper discusses the production of a digital environment to foster the learning of conics through augmented reality. The name conic refers to curves obtained by the intersection of a plane with a right circular conical surface. The environment gives students the opportunity to interact with the cone and the plane as virtual objects in real…

Bladder stones after bladder augmentation are not what they seem.

Science.gov (United States)

Szymanski, Konrad M; Misseri, Rosalia; Whittam, Benjamin; Lingeman, James E; Amstutz, Sable; Ring, Joshua D; Kaefer, Martin; Rink, Richard C; Cain, Mark P

2016-04-01

Bladder and renal calculi after bladder augmentation are thought to be primarily infectious, yet few studies have reported stone composition. The primary aim was to assess bladder stone composition after augmentation, and renal stone composition in those with subsequent nephrolithiasis. The exploratory secondary aim was to screen for possible risk factors for developing infectious stones. Patients treated for bladder stones after bladder augmentation at the present institution between 1981 and 2012 were retrospectively reviewed. Data were collected on demographics, surgeries and stone composition. Patients without stone analysis were excluded. Stones containing struvite, carbonate apatite or ammonium acid ureate were classified as infectious. The following variables were analyzed for a possible association with infectious bladder stone composition: gender, history of cloacal exstrophy, ambulatory status, nephrolithiasis, recurrent urea-splitting urinary tract infections, first vs recurrent stones, timing of presentation with a calculus, history of bladder neck procedures, catheterizable channel and vesicoureteral reflux. Fisher's exact test was used for analysis. Of the 107 patients with bladder stones after bladder augmentation, 85 met inclusion criteria. Median age at augmentation was 8.0 years (follow-up 10.8 years). Forty-four patients (51.8%) recurred (14 multiple recurrences, 143 bladder stones). Renal calculi developed in 19 (22.4%) patients with a bladder stone, and 10 (52.6%) recurred (30 renal stones). Overall, 30.8% of bladder stones were non-infectious (Table). Among patients recurring after an infectious bladder stone, 30.4% recurred with a non-infectious one. Among patients recurring after a non-infectious stone, 84.6% recurred with a non-infectious one (P = 0.005). Compared with bladder stones, renal stones were more likely to be non-infectious (60.0%, P = 0.003). Of patients with recurrent renal calculi after an infectious stone, 40.0% recurred with

Augmented Reality Development Environment for Electronic Procedure systems

Data.gov (United States)

National Aeronautics and Space Administration — The Evolvable Mars Campaign (EMC) has identified technology needs for Autonomous Crew Operations.  Augmented Reality (AR) is part of the solution to enable crew...

Effects of Creatine Monohydrate Augmentation on Brain Metabolic and Network Outcome Measures in Women With Major Depressive Disorder.

Science.gov (United States)

Yoon, Sujung; Kim, Jieun E; Hwang, Jaeuk; Kim, Tae-Suk; Kang, Hee Jin; Namgung, Eun; Ban, Soonhyun; Oh, Subin; Yang, Jeongwon; Renshaw, Perry F; Lyoo, In Kyoon

2016-09-15

Creatine monohydrate (creatine) augmentation has the potential to accelerate the clinical responses to and enhance the overall efficacy of selective serotonin reuptake inhibitor treatment in women with major depressive disorder (MDD). Although it has been suggested that creatine augmentation may involve the restoration of brain energy metabolism, the mechanisms underlying its antidepressant efficacy are unknown. In a randomized, double-blind, placebo-controlled trial, 52 women with MDD were assigned to receive either creatine augmentation or placebo augmentation of escitalopram; 34 subjects participated in multimodal neuroimaging assessments at baseline and week 8. Age-matched healthy women (n = 39) were also assessed twice at the same intervals. Metabolic and network outcomes were measured for changes in prefrontal N-acetylaspartate and changes in rich club hub connections of the structural brain network using proton magnetic resonance spectroscopy and diffusion tensor imaging, respectively. We found MDD-related metabolic and network dysfunction at baseline. Improvement in depressive symptoms was greater in patients receiving creatine augmentation relative to placebo augmentation. After 8 weeks of treatment, prefrontal N-acetylaspartate levels increased significantly in the creatine augmentation group compared with the placebo augmentation group. Increment in rich club hub connections was also greater in the creatine augmentation group than in the placebo augmentation group. N-acetylaspartate levels and rich club connections increased after creatine augmentation of selective serotonin reuptake inhibitor treatment. Effects of creatine administration on brain energy metabolism and network organization may partly underlie its efficacy in treating women with MDD. Copyright © 2016 Society of Biological Psychiatry. Published by Elsevier Inc. All rights reserved.

A Mobile Augmented Reality Emulator for Android

Directory of Open Access Journals (Sweden)

Donald Munro

2017-07-01

Full Text Available Augmented Reality (AR provides a fusion of the real and virtual worlds by superimposing virtual objects on real world scenery. The implementation of AR on mobile devices is known as Mobile Augmented Reality (MAR. MAR is in its infancy and MAR development software is in the process of maturing. Dating back to the origin of Computer Science as an independent field, software development tools have been an integral part of the process of software creation. MAR, being a relatively new technology, is still lacking such related software development tools. With the rapid progression of mobile devices, the development of MAR applications fusing advanced Computer Vision techniques with mobile device sensors have become increasingly feasible. However, testing and debugging of MAR applications present a new challenge in that they require the developer be at the location that is being augmented at some point during the development process. In this research study, a MAR recorder application was developed as well as emulation class libraries for Android devices that allows the recording and off-site playback of video, location and motion sensor data. The research objective was to provide a software emulator which provides debugging, testing and prototyping capabilities for a MAR application including the ability to emulate the combination of computer vision with locational and motion sensors using previously recorded data. The emulator was evaluated using different mobile technologies. The results indicate that this research could assist developers of MAR applications to implement applications more rapidly, without being at the location.

Combined trabeculotomy and augmented trabeculectomy in primary congenital glaucoma

International Nuclear Information System (INIS)

Shakir, M.; Bukhari, A.; Kamil, Z.; Zafar, S.

2013-01-01

Objective: To evaluate the results of combined trabeculotomy and augmented trabeculectomy as a primary procedure on intraocular pressure and corneal clarity in uncomplicated congenital glaucoma. Study Design: A case series. Place and Duration of Study: L.R.B.T Free Base Eye Hospital, Karachi, from January 2007 to December 2010. Methodology: Twenty eyes of 14 consecutive children with primary congenital glaucoma who had primary trabeculotomy and augmented trabeculectomy were observed from January 2007 to December 2010 at LRBT Free Base Eye Hospital, Karachi. Main outcome measures were pre-operative and postoperative intraocular pressure, corneal clarity and complications. Results: Out of 14 patients, 9 patients (64.2%) were male and 5 patients (35.7%) were female with age ranging between 5 months to 6 years. Mean duration of follow-up was 8.25 months. Seventeen eyes (85%) showed improvement in corneal clarity from baseline at their last follow-up. Mean intraocular pressure decreased from 32 +- 2.5 mmHg pre-operatively to 13 +- 2.5 mmHg postoperatively at the last follow-up (p < 0.001). Complete success (intraocular pressure < 20 mmHg) was obtained in 16 (80%) out of 20 eyes. Complications encountered were vitreous loss per-operatively while performing iridectomy in 1 eye (5%), shallow anterior chamber on the first postoperative day in 1 eye (5%) and hyphema in 1 eye (5%). Conclusion: Combined trabeculotomy and augmented trabeculectomy for primary congenital glaucoma resulted in improvement in reduction of intraocular pressure as well as improvement in corneal clarity. Hence, combined trabeculotomy and augmented trabeculectomy is a safe and effective procedure for primary congenital glaucoma. (author)

Context-Aware Based Efficient Training System Using Augmented Reality and Gravity Sensor for Healthcare Services

Science.gov (United States)

Kim, Seoksoo; Jung, Sungmo; Song, Jae-Gu; Kang, Byong-Ho

As augmented reality and a gravity sensor is of growing interest, siginificant developement is being made on related technology, which allows application of the technology in a variety of areas with greater expectations. In applying Context-aware to augmented reality, it can make useful programs. A traning system suggested in this study helps a user to understand an effcienct training method using augmented reality and make sure if his exercise is being done propery based on the data collected by a gravity sensor. Therefore, this research aims to suggest an efficient training environment that can enhance previous training methods by applying augmented reality and a gravity sensor.

FlyAR: augmented reality supported micro aerial vehicle navigation.

Science.gov (United States)

Zollmann, Stefanie; Hoppe, Christof; Langlotz, Tobias; Reitmayr, Gerhard

2014-04-01

Micro aerial vehicles equipped with high-resolution cameras can be used to create aerial reconstructions of an area of interest. In that context automatic flight path planning and autonomous flying is often applied but so far cannot fully replace the human in the loop, supervising the flight on-site to assure that there are no collisions with obstacles. Unfortunately, this workflow yields several issues, such as the need to mentally transfer the aerial vehicle’s position between 2D map positions and the physical environment, and the complicated depth perception of objects flying in the distance. Augmented Reality can address these issues by bringing the flight planning process on-site and visualizing the spatial relationship between the planned or current positions of the vehicle and the physical environment. In this paper, we present Augmented Reality supported navigation and flight planning of micro aerial vehicles by augmenting the user’s view with relevant information for flight planning and live feedback for flight supervision. Furthermore, we introduce additional depth hints supporting the user in understanding the spatial relationship of virtual waypoints in the physical world and investigate the effect of these visualization techniques on the spatial understanding.

Minimally Invasive Technique for PMMA Augmentation of Fenestrated Screws

Directory of Open Access Journals (Sweden)

Jan-Helge Klingler

2015-01-01

Full Text Available Purpose. To describe the minimally invasive technique for cement augmentation of cannulated and fenestrated screws using an injection cannula as well as to report its safety and efficacy. Methods. A total of 157 cannulated and fenestrated pedicle screws had been cement-augmented during minimally invasive posterior screw-rod spondylodesis in 35 patients from January to December 2012. Retrospective evaluation of cement extravasation and screw loosening was carried out in postoperative plain radiographs and thin-sliced triplanar computed tomography scans. Results. Twenty-seven, largely prevertebral cement extravasations were detected in 157 screws (17.2%. None of the cement extravasations was causing a clinical sequela like a new neurological deficit. One screw loosening was noted (0.6% after a mean follow-up of 12.8 months. We observed no cementation-associated complication like pulmonary embolism or hemodynamic insufficiency. Conclusions. The presented minimally invasive cement augmentation technique using an injection cannula facilitates convenient and safe cement delivery through polyaxial cannulated and fenestrated screws during minimally invasive screw-rod spondylodesis. Nevertheless, the optimal injection technique and design of fenestrated screws have yet to be identified. This trial is registered with German Clinical Trials DRKS00006726.

Herriott Cell Augmentation of a Quadrature Heterodyne Interferometer

National Research Council Canada - National Science Library

Antonsen, Erik

2002-01-01

A quadrature heterodyne interferometer is augmented with a Herriott Cell multi-pass reflector to increase instrument resolution and enable a separation of the phase shift due to neutral density from room vibrations...

Augmentation Phalloplasty Patient Selection and Satisfaction Inventory: a novel questionnaire to evaluate patients considered for augmentation phalloplasty surgery because of penile dysmorphophobia.

Science.gov (United States)

Spyropoulos, Evangelos; Galanakis, Ioannis; Dellis, Athanasios

2007-08-01

To introduce a novel questionnaire by which we attempted to identify the most suitable candidates for augmentation phalloplasty surgery for penile dysmorphophobia and to objectively estimate the outcome. A total of 45 physically normal young adult men who presented with complaints of a "small penis" and were seeking surgical correction were included in the study. In addition to the ordinary evaluation, all completed the questionnaire devised by our department, the Augmentation Phalloplasty Patient Selection and Satisfaction Inventory (APPSSI). The APPSSI aims to quantitatively assess the severity of the condition and the degree of the patient's willingness to undergo penile augmentation and to numerically measure the postoperative result. The APPSSI consists of four questions, with each having five possible answers (scale 0 to 4). Questions 1 through 3 were asked preoperatively (suitability assessment) and questions 1, 2, and 4 postoperatively (outcome evaluation). The eligibility threshold for surgery was a preoperative score of 6 or less. The preoperative scores ranged from 0 (surgery justified) to 12 (surgery not justified), and the postoperative scores ranged from 0 (disappointed) to 12 (excited). The Student t test was used for statistical analysis, and P enlargement (n = 4), or celioplasty-penile lengthening (n = 2). Postoperatively, the score increased by 4.36 (mean 7.54, P <0.001), and the condition improved by 25% to 50% in 11 patients, 66.6% in 1, and remained unchanged (0%) in 1 patient. The APPSSI questionnaire properly identified patients who significantly benefited from augmentation phalloplasty. Nevertheless, because of the small sample size and nonrandomized study, the questionnaire's validation requires a larger number of patients tested in a randomized manner by more researchers to become a valuable clinical instrument and patient eligibility criterion for this type of surgery.

14 CFR 91.1061 - Augmented flight crews.

Science.gov (United States)

2010-01-01

...) Minimum After Duty Rest Period for Multi-Time Zone Flights 18 hours 24 hours ...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Fractional Ownership... crewmember, and no flight crewmember may accept an assignment, for flight time as a member of an augmented...

An Interactive Augmented Reality Implementation of Hijaiyah Alphabet for Children Education

Science.gov (United States)

Rahmat, R. F.; Akbar, F.; Syahputra, M. F.; Budiman, M. A.; Hizriadi, A.

2018-03-01

Hijaiyah alphabet is letters used in the Qur’an. An attractive and exciting learning process of Hijaiyah alphabet is necessary for the children. One of the alternatives to create attractive and interesting learning process of Hijaiyah alphabet is to develop it into a mobile application using augmented reality technology. Augmented reality is a technology that combines two-dimensional or three-dimensional virtual objects into actual three-dimensional circles and projects them in real time. The purpose of application aims to foster the children interest in learning Hijaiyah alphabet. This application is using Smartphone and marker as the medium. It was built using Unity and augmented reality library, namely Vuforia, then using Blender as the 3D object modeling software. The output generated from this research is the learning application of Hijaiyah letters using augmented reality. How to use it is as follows: first, place marker that has been registered and printed; second, the smartphone camera will track the marker. If the marker is invalid, the user should repeat the tracking process. If the marker is valid and identified, the marker will have projected the objects of Hijaiyah alphabet in three-dimensional form. Lastly, the user can learn and understand the shape and pronunciation of Hijaiyah alphabet by touching the virtual button on the marker

Renal capsule for augmentation cystoplasty in canine model: a favorable biomaterial?

Directory of Open Access Journals (Sweden)

Mehdi Salehipour

2016-04-01

Full Text Available ABSTRACT Purpose: To evaluate effectiveness of canine renal capsule for augmentation cystoplasty. Materials and Methods: Ten adult dogs participated in this study. After induction of anesthesia each animal underwent bed side urodynamic study, bladder capacity and bladder pressure was recorded. Then via mid line incision abdominal cavity was entered, right kidney was identified and its capsule was dissected. Bladder augmentation was done by anastomosing the renal capsule to the bladder. After 6 months bed side urodynamic study was performed again and changes in bladder volume and pressure were recorded. Then the animals were sacrificed and the augmented bladders were sent for histopathology evaluation. Results: Mean maximum anatomic bladder capacity before cystoplasty was 334.00±11.40cc which increased to 488.00±14.83cc post-operatively (p=0.039. Mean anatomic bladder pressure before cystoplasty was 19.00±1.58cmH2O which decreased to 12.60±1.14cmH2O post-operatively (p=0.039. Histopathology evaluation revealed epithelialization of the renal capsule with urothelium without evidence of fibrosis, collagen deposits or contracture. Conclusions: Our data shows that renal capsule is a favorable biomaterial for bladder augmentation in a canine model.

Comparative assessment of fungal augmentation treatments of a fine-textured and historically oil-contaminated soil.

Science.gov (United States)

Covino, Stefano; Stella, Tatiana; D'Annibale, Alessandro; Lladó, Salvador; Baldrian, Petr; Čvančarová, Monika; Cajthaml, Tomas; Petruccioli, Maurizio

2016-10-01

The removal of aged hydrophobic contaminants from fine-textured soils is a challenging issue in remediation. The objective of this study was to compare the efficacy of augmentation treatments to that of biostimulation in terms of total aliphatic hydrocarbon (TAH) and toxicity removal from a historically contaminated clay soil and to assess their impact on the resident microbial community. To this aim, Pleurotus ostreatus, Botryosphaeria rhodina and a combination of both were used as the inoculants while the addition of a sterilized lignocellulose mixture to soil (1:5, w/w) was used as a biostimulation approach. As opposed to the non-amended control soil, where no changes in TAH concentration and residual toxicity were observed after 60days, the activation of specialized bacteria was found in the biostimulated microcosms resulting in significant TAH removal (79.8%). The bacterial community structure in B. rhodina-augmented microcosms did not differ from the biostimulated microcosms due to the inability of the fungus to be retained within the resident microbiota. Best TAH removals were observed in microcosms inoculated with P. ostreatus alone (Po) and in binary consortium with B. rhodina (BC) (86.8 and 88.2%, respectively). In these microcosms, contaminant degradation exceeded their bioavailability thresholds determined by sequential supercritical CO2 extraction. Illumina metabarcoding of 16S rRNA gene showed that the augmentation with Po and BC led to lower relative abundances of Gram(+) taxa, Actinobacteria in particular, than those in biostimulated microcosms. Best detoxification, with respect to the non-amended incubation control, was found in Po microcosms where a drop in collembola mortality (from 90 to 22%) occurred. At the end of incubation, in both Po and BC, the relative abundances of P. ostreatus sequences were higher than 60% thus showing the suitability of this fungus in bioaugmentation-based remediation applications. Copyright © 2016 Elsevier B.V. All

Compression Pad Cavity Heating Augmentation on Orion Heat Shield

Science.gov (United States)

Hollis, Brian R.

2011-01-01

An experimental study has been conducted to assess the effects of compression pad cavities on the aeroheating environment of the Project Orion Crew Exploration Vehicle heat shield. Testing was conducted in Mach 6 and 10 perfect-gas wind tunnels to obtain heating measurements in and around the compression pads cavities using global phosphor thermography. Data were obtained over a wide range of Reynolds numbers that produced laminar, transitional, and turbulent flow within and downstream of the cavities. The effects of cavity dimensions on boundary-layer transition and heating augmentation levels were studied. Correlations were developed for transition onset and for the average cavity-heating augmentation.

Feasibility of Augmented Reality in Clinical Simulations: Using Google Glass With Manikins.

Science.gov (United States)

Chaballout, Basil; Molloy, Margory; Vaughn, Jacqueline; Brisson Iii, Raymond; Shaw, Ryan

2016-03-07

Studies show that students who use fidelity-based simulation technology perform better and have higher retention rates than peers who learn in traditional paper-based training. Augmented reality is increasingly being used as a teaching and learning tool in a continual effort to make simulations more realistic for students. The aim of this project was to assess the feasibility and acceptability of using augmented reality via Google Glass during clinical simulation scenarios for training health science students. Students performed a clinical simulation while watching a video through Google Glass of a patient actor simulating respiratory distress. Following participation in the scenarios students completed two surveys and were questioned if they would recommend continued use of this technology in clinical simulation experiences. We were able to have students watch a video in their field of vision of a patient who mimicked the simulated manikin. Students were overall positive about the implications for being able to view a patient during the simulations, and most students recommended using the technology in the future. Overall, students reported perceived realism with augmented reality using Google Glass. However, there were technical and usability challenges with the device. As newer portable and consumer-focused technologies become available, augmented reality is increasingly being used as a teaching and learning tool to make clinical simulations more realistic for health science students. We found Google Glass feasible and acceptable as a tool for augmented reality in clinical simulations.

Estimating the Augmented Reflectance Ratio of the Ocean Surface When Whitecaps Appear

Directory of Open Access Journals (Sweden)

Zhantang Xu

2015-10-01

Full Text Available The presence of foam influences the accuracy of satellite-derived water-leaving radiance. A model has been developed to estimate the augmented reflectance ratio (A(λ,U due to differences in the fraction of whitecap coverage (w on the ocean surface. A(λ,U can be calculated from the product of w and ρ(λ,U, where ρ(λ,U is the augmented ratio of the reflectance of background water (Rb(λ caused by the presence of whitecaps. Our results showed that the average A(400~700,U in the visible region was approximately 1.3% at U = 9 m∙s−1, 2.2% at U = 10 m∙s−1, 4.4% at U = 12 m∙s−1, 7.4% at U = 14 m∙s−1, 19% at U = 19 m∙s−1 and 37.9% at U = 24 m∙s−1, making it is necessary to consider the augmented reflectance ratio for remote sensing applications. By estimating remote sensing augmented reflectance using A(λ,U, it was found that the result was in good agreement with previous studies conducted in other areas with U from 9 to 12 m∙s−1. Since Rb(λ is temporally and spatially variable, our model considered the variation of Rb(λ, whereas existing models have assumed that Rb(λ is constant. Therefore, the proposed model is more suitable for estimating the augmented reflectance ratio due to whitecaps.

Development of a Real-Time Detection System for Augmented Reality Driving

OpenAIRE

Hsu, Kuei-Shu; Wang, Chia-Sui; Jiang, Jinn-Feng; Wei, Hung-Yuan

2015-01-01

Augmented reality technology is applied so that driving tests may be performed in various environments using a virtual reality scenario with the ultimate goal of improving visual and interactive effects of simulated drivers. Environmental conditions simulating a real scenario are created using an augmented reality structure, which guarantees the test taker’s security since they are not subject to real-life elements and dangers. Furthermore, the accuracy of tests conducted through virtual real...

Physical hypermedia: augmenting physical material with hypermedia structures

DEFF Research Database (Denmark)

Grønbæk, Kaj; Ørbæk, Peter; Kristensen, Jannie Friis

2003-01-01

This paper introduces the notion of physical hypermedia, addressing the problem of organizing material in mixed digital and physical environments. Based on empirical studies, we propose concepts for collectional actions and meta-data actions, and present prototypes combining principles from...... augmented reality and hypermedia to support organization of mixtures of digital and physical materials. Our prototype of a physical hypermedia system is running on an augmented architect's desk and digital walls utilizing Radio Frequency Identifier (RFID) tags as well as visual tags tracked by cameras....... It allows users to tag physical materials, and have these tracked by readers (antennas) that may become pervasive in our work environments. In the physical hypermedia system, we work with three categories of RFID tags: simple object tags, collectional tags, and tooltags invoking operations such as grouping...

Use of display technologies for augmented reality enhancement

Science.gov (United States)

Harding, Kevin

2016-06-01

Augmented reality (AR) is seen as an important tool for the future of user interfaces as well as training applications. An important application area for AR is expected to be in the digitization of training and worker instructions used in the Brilliant Factory environment. The transition of work instructions methods from printed pages in a book or taped to a machine to virtual simulations is a long step with many challenges along the way. A variety of augmented reality tools are being explored today for industrial applications that range from simple programmable projections in the work space to 3D displays and head mounted gear. This paper will review where some of these tool are today and some of the pros and cons being considered for the future worker environment.

Using augmented reality to teach and learn biochemistry.

Science.gov (United States)

Vega Garzón, Juan Carlos; Magrini, Marcio Luiz; Galembeck, Eduardo

2017-09-01

Understanding metabolism and metabolic pathways constitutes one of the central aims for students of biological sciences. Learning metabolic pathways should be focused on the understanding of general concepts and core principles. New technologies such Augmented Reality (AR) have shown potential to improve assimilation of biochemistry abstract concepts because students can manipulate 3D molecules in real time. Here we describe an application named Augmented Reality Metabolic Pathways (ARMET), which allowed students to visualize the 3D molecular structure of substrates and products, thus perceiving changes in each molecule. The structural modification of molecules shows students the flow and exchange of compounds and energy through metabolism. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(5):417-420, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

Augmented reality for the surgeon: Systematic review.

Science.gov (United States)

Yoon, Jang W; Chen, Robert E; Kim, Esther J; Akinduro, Oluwaseun O; Kerezoudis, Panagiotis; Han, Phillip K; Si, Phong; Freeman, William D; Diaz, Roberto J; Komotar, Ricardo J; Pirris, Stephen M; Brown, Benjamin L; Bydon, Mohamad; Wang, Michael Y; Wharen, Robert E; Quinones-Hinojosa, Alfredo

2018-04-30

Since the introduction of wearable head-up displays, there has been much interest in the surgical community adapting this technology into routine surgical practice. We used the keywords augmented reality OR wearable device OR head-up display AND surgery using PubMed, EBSCO, IEEE and SCOPUS databases. After exclusions, 74 published articles that evaluated the utility of wearable head-up displays in surgical settings were included in our review. Across all studies, the most common use of head-up displays was in cases of live streaming from surgical microscopes, navigation, monitoring of vital signs, and display of preoperative images. The most commonly used head-up display was Google Glass. Head-up displays enhanced surgeons' operating experience; common disadvantages include limited battery life, display size and discomfort. Due to ergonomic issues with dual-screen devices, augmented reality devices with the capacity to overlay images onto the surgical field will be key features of next-generation surgical head-up displays. Copyright © 2018 John Wiley & Sons, Ltd.

Augmenting Probabilistic Risk Assesment with Malevolent Initiators

International Nuclear Information System (INIS)

Smith, Curtis; Schwieder, David

2011-01-01

As commonly practiced, the use of probabilistic risk assessment (PRA) in nuclear power plants only considers accident initiators such as natural hazards, equipment failures, and human error. Malevolent initiators are ignored in PRA, but are considered the domain of physical security, which uses vulnerability assessment based on an officially specified threat (design basis threat). This paper explores the implications of augmenting and extending existing PRA models by considering new and modified scenarios resulting from malevolent initiators. Teaming the augmented PRA models with conventional vulnerability assessments can cost-effectively enhance security of a nuclear power plant. This methodology is useful for operating plants, as well as in the design of new plants. For the methodology, we have proposed an approach that builds on and extends the practice of PRA for nuclear power plants for security-related issues. Rather than only considering 'random' failures, we demonstrated a framework that is able to represent and model malevolent initiating events and associated plant impacts.

Potential perils of peri-Pokémon perambulation: the dark reality of augmented reality?

Science.gov (United States)

Joseph, Bellal; Armstrong, David G

2016-10-01

Recently, the layering of augmented reality information on top of smartphone applications has created unprecedented user engagement and popularity. One augmented reality-based entertainment application, Pokémon Go (Pokémon Company, Tokyo, Japan) has become the most rapidly downloaded in history. This technology holds tremendous promise to promote ambulatory activity. However, there exists the obvious potential for distraction-related morbidity. We report two cases, presenting simultaneously to our trauma center, with injuries sustained secondary to gameplay with this augmented reality-based application.

A Study on Tracking and Augmentation in Mobile AR for e-Leisure

Directory of Open Access Journals (Sweden)

Seong-Wook Jang

2018-01-01

Full Text Available Recently, a mobile augmented reality (AR system with AR technology that requires high performance has become popular due to the improved performance of smartphones. In particular, mobile AR that directly interacts with outdoor environments has been in development because of increasing interest in e-leisure due to improvements in living standards. Therefore, this paper aims to study tracking and augmentation in mobile AR for e-leisure. We analyzed the performance of human body tracking application implemented in a mobile system (smartphone using three methods (marker-based, markerless, and sensor-based for the feasibility examination of human body tracking in mobile AR. Furthermore, game information augmentation was examined through the implementation of mobile AR using two methods (marker- and sensor-based.

Augmented reality warnings in vehicles: Effects of modality and specificity on effectiveness.

Science.gov (United States)

Schwarz, Felix; Fastenmeier, Wolfgang

2017-04-01

In the future, vehicles will be able to warn drivers of hidden dangers before they are visible. Specific warning information about these hazards could improve drivers' reactions and the warning effectiveness, but could also impair them, for example, by additional cognitive-processing costs. In a driving simulator study with 88 participants, we investigated the effects of modality (auditory vs. visual) and specificity (low vs. high) on warning effectiveness. For the specific warnings, we used augmented reality as an advanced technology to display the additional auditory or visual warning information. Part one of the study concentrates on the effectiveness of necessary warnings and part two on the drivers' compliance despite false alarms. For the first warning scenario, we found several positive main effects of specificity. However, subsequent effects of specificity were moderated by the modality of the warnings. The specific visual warnings were observed to have advantages over the three other warning designs concerning gaze and braking reaction times, passing speeds and collision rates. Besides the true alarms, braking reaction times as well as subjective evaluation after these warnings were still improved despite false alarms. The specific auditory warnings were revealed to have only a few advantages, but also several disadvantages. The results further indicate that the exact coding of additional information, beyond its mere amount and modality, plays an important role. Moreover, the observed advantages of the specific visual warnings highlight the potential benefit of augmented reality coding to improve future collision warnings. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mechanism of transient force augmentation varying with two distinct timescales for interacting vortex rings

Science.gov (United States)

Fu, Zhidong; Qin, Suyang; Liu, Hong

2014-01-01

The dynamics of dual vortex ring flows is studied experimentally and numerically in a model system that consists of a piston-cylinder apparatus. The flows are generated by double identical strokes which have the velocity profile characterized by the sinusoidal function of half the period. By calculating the total wake impulse in two strokes in the experiments, it is found that the average propulsive force increases by 50% in the second stroke for the sufficiently small stroke length, compared with the first stroke. In the numerical simulations, two types of transient force augmentation are revealed, there being the transient force augmentation for the small stroke lengths and the absolute transient force augmentation for the large stroke lengths. The relative transient force augmentation increases to 78% for L/D = 1, while the absolute transient force augmentation for L/D = 4 is twice as much as that for L/D = 1. Further investigation demonstrates that the force augmentation is attributed to the interaction between vortex rings, which induces transport of vortex impulse and more evident fluid entrainment. The critical situation of vortex ring separation is defined and indicated, with vortex spacing falling in a narrow gap when the stroke lengths vary. A new model is proposed concerning the limiting process of impulse, further suggesting that apart from vortex formation timescale, vortex spacing should be interpreted as an independent timescale to reflect the dynamics of vortex interaction.

CLIENT INTERACTION TECHNIQUES WHEN USING AUGMENTED REALITY TECHNOLOGY APPLICATIONS IN SALES

OpenAIRE

Kravtsov A. A.; Loyko V. I.

2015-01-01

Augmented reality offers unique ways to display visual information, in particular the visualization of threedimensional objects. With AR object can be visualized directly in the context of its operation. As an example can be a piece of furniture rendered in the interior, plants in the garden, the architectural object in the landscape. Modern consumer devices such as smartphones and tablet computers, as well as the algorithmic base lead to the possibility of augmented reality mass usage. The c...

Sternocleidomastoid flap augmentation of the pharyngeal closure after total laryngectomy.

Science.gov (United States)

Ibrahim, Sherif Gabr; Wahba, Basim Metwally; Elbatawi, Ahmed Mahmoud; Eltelety, Ahmad Mohamed

2017-08-01

The objective of the study was to evaluate the effect of sternocleidomastoid (SCM) flap augmentation of the pharyngeal closure after total laryngectomy on the incidence of pharyngocutaneous fistula (PCF). Thirty patients with T4a laryngeal carcinoma and none of them receiving primary radiotherapy previously were divided into two equal groups. Group A patients had SCM flap augmentation of the pharyngeal closure after total laryngectomy. Group B patients had the standard pharyngeal closure without augmentation. Both groups were followed up for 30 days postoperatively for the development of PCF. The use of the SCM added about extra 15 min to the surgical procedure in all patients (p laryngectomy. Three patients in each group developed PCF either early (10 days or less postoperatively) or late (more than 10 days but less than 30 days postoperatively). There was no statistically significant difference in the length of hospital stay between the two groups. The use of SCM flap did not reduce the incidence of PCF after total laryngectomy.

VirtualTable: a projection augmented reality game

DEFF Research Database (Denmark)

Dal Corso, Alessandro; Olsen, Mikkel Damgaard; Steenstrup, Kasper Hornbak

2015-01-01

VirtualTable is a projection augmented reality installation where users are engaged in an interactive tower defense game. The installation runs continuously and is designed to attract people to a table, which the game is projected onto. Any number of players can join the game for an optional period...

Long-term psychological sequelae of augmentation mammoplasty ...

African Journals Online (AJOL)

A request for elective surgery for augmentation mammoplasty (AM) is often associated with underlying psychopathology and high expectations of a positive psychological outcome. This study was designed to ascertain the long-term psychological sequelae of AM in a group of patients who were reassessed 3 years or more ...

Radiation-induced augmentation of the immune response

International Nuclear Information System (INIS)

Anderson, R.E.; Lefkovits, I.; Troup, G.M.

1980-01-01

Radiation-induced augmentation of the immune response has been shown to occur both in vivo and in vitro. Evidence is presented to implicate injury to an extremely radiosensitive T cell in the expression of this phenomenon. Experiments are outlined which could be employed to support or reflect this hypothesis

Person Re-Identification by Camera Correlation Aware Feature Augmentation.

Science.gov (United States)

Chen, Ying-Cong; Zhu, Xiatian; Zheng, Wei-Shi; Lai, Jian-Huang

2018-02-01

The challenge of person re-identification (re-id) is to match individual images of the same person captured by different non-overlapping camera views against significant and unknown cross-view feature distortion. While a large number of distance metric/subspace learning models have been developed for re-id, the cross-view transformations they learned are view-generic and thus potentially less effective in quantifying the feature distortion inherent to each camera view. Learning view-specific feature transformations for re-id (i.e., view-specific re-id), an under-studied approach, becomes an alternative resort for this problem. In this work, we formulate a novel view-specific person re-identification framework from the feature augmentation point of view, called Camera coR relation Aware Feature augmenTation (CRAFT). Specifically, CRAFT performs cross-view adaptation by automatically measuring camera correlation from cross-view visual data distribution and adaptively conducting feature augmentation to transform the original features into a new adaptive space. Through our augmentation framework, view-generic learning algorithms can be readily generalized to learn and optimize view-specific sub-models whilst simultaneously modelling view-generic discrimination information. Therefore, our framework not only inherits the strength of view-generic model learning but also provides an effective way to take into account view specific characteristics. Our CRAFT framework can be extended to jointly learn view-specific feature transformations for person re-id across a large network with more than two cameras, a largely under-investigated but realistic re-id setting. Additionally, we present a domain-generic deep person appearance representation which is designed particularly to be towards view invariant for facilitating cross-view adaptation by CRAFT. We conducted extensively comparative experiments to validate the superiority and advantages of our proposed framework over state

Perforated schneiderian membrane repair during sinus augmentation in conjunction with immediate implant placement

Directory of Open Access Journals (Sweden)

K Hameed Fathima

2014-01-01

Full Text Available Dental implant associated rehabilitation of the posterior maxilla poses unique challenge owing to the presence of pneumatized sinuses and atrophied alveolar bone. Sinus augmentation procedure to manage expanded sinuses frequently results in membrane tear resulting in unfavorable stabilization of the graft and associated bone regeneration. Simultaneous implant placement during sinus augmentation procedures frequently requires a minimal alveolar bone height, which when not present forces clinician to defer implant placement resulting in extended treatment duration and multiple surgical appointments. The present case report is about a piezosurgery assisted lateral wall osteotomy approach for sinus augmentation associated with membrane repair with simultaneous implant placement in the posterior maxilla.

Can oxytocin augmentation modify the risk of epidural analgesia by maternal age in cesarean sections?

Science.gov (United States)

Rossen, Janne; Klungsøyr, Kari; Albrechtsen, Susanne; Løkkegård, Ellen; Rasmussen, Steen; Bergholt, Thomas; Skjeldestad, Finn E

2018-03-07

Maternal age is an established risk factor for cesarean section; epidural analgesia and oxytocin augmentation may modify this association. We investigated the effects and interactions of oxytocin augmentation, epidural analgesia and maternal age on the risk of cesarean section. In all, 416 386 nulliparous women with spontaneous onset of labor, ≥37 weeks of gestation and singleton infants with a cephalic presentation during 2000-2011 from Norway and Denmark were included [Ten-group classification system (Robson) group 1]. In this case-control study the main exposure was maternal age; epidural analgesia, oxytocin augmentation, birthweight and time period were explanatory variables. Chi-square test and logistic regression were used to estimate associations and interactions. The cesarean section rate increased consistently with advancing maternal age, both overall and in strata of epidural analgesia and oxytocin augmentation. We observed strong interactions between maternal age, oxytocin augmentation and epidural analgesia for the risk of cesarean section. Women with epidural analgesia generally had a reduced adjusted odds ratio when oxytocin was used compared with when it was not used. In Norway, this applied to all maternal age groups but in Denmark only for women ≥30 years. Among women without epidural, oxytocin augmentation was associated with an increased odds ratio for cesarean section in Denmark, whereas no difference was observed in Norway. Oxytocin augmentation in nulliparous women with epidural analgesia is associated with a reduced risk of cesarean section in labor with spontaneous onset. © 2018 Nordic Federation of Societies of Obstetrics and Gynecology.

Does recombinant human Epo increase exercise capacity by means other than augmenting oxygen transport?

DEFF Research Database (Denmark)

Lundby, C; Robach, P; Boushel, R

2008-01-01

This study was performed to test the hypothesis that administration of recombinant human erythropoietin (rHuEpo) in humans increases maximal oxygen consumption by augmenting the maximal oxygen carrying capacity of blood. Systemic and leg oxygen delivery and oxygen uptake were studied during...... before rHuEpo treatment). Blood buffer capacity remained unaffected by rHuEpo treatment and hemodilution. The augmented hematocrit did not compromise peak cardiac output. In summary, in healthy humans, rHuEpo increases maximal oxygen consumption due to augmented systemic and muscular peak oxygen delivery....

Methods and systems relating to an augmented virtuality environment

Science.gov (United States)

Nielsen, Curtis W; Anderson, Matthew O; McKay, Mark D; Wadsworth, Derek C; Boyce, Jodie R; Hruska, Ryan C; Koudelka, John A; Whetten, Jonathan; Bruemmer, David J

2014-05-20

Systems and methods relating to an augmented virtuality system are disclosed. A method of operating an augmented virtuality system may comprise displaying imagery of a real-world environment in an operating picture. The method may further include displaying a plurality of virtual icons in the operating picture representing at least some assets of a plurality of assets positioned in the real-world environment. Additionally, the method may include displaying at least one virtual item in the operating picture representing data sensed by one or more of the assets of the plurality of assets and remotely controlling at least one asset of the plurality of assets by interacting with a virtual icon associated with the at least one asset.

Cooperative Convex Optimization in Networked Systems: Augmented Lagrangian Algorithms With Directed Gossip Communication

Science.gov (United States)

Jakovetic, Dusan; Xavier, João; Moura, José M. F.

2011-08-01

We study distributed optimization in networked systems, where nodes cooperate to find the optimal quantity of common interest, x=x^\\star. The objective function of the corresponding optimization problem is the sum of private (known only by a node,) convex, nodes' objectives and each node imposes a private convex constraint on the allowed values of x. We solve this problem for generic connected network topologies with asymmetric random link failures with a novel distributed, decentralized algorithm. We refer to this algorithm as AL-G (augmented Lagrangian gossiping,) and to its variants as AL-MG (augmented Lagrangian multi neighbor gossiping) and AL-BG (augmented Lagrangian broadcast gossiping.) The AL-G algorithm is based on the augmented Lagrangian dual function. Dual variables are updated by the standard method of multipliers, at a slow time scale. To update the primal variables, we propose a novel, Gauss-Seidel type, randomized algorithm, at a fast time scale. AL-G uses unidirectional gossip communication, only between immediate neighbors in the network and is resilient to random link failures. For networks with reliable communication (i.e., no failures,) the simplified, AL-BG (augmented Lagrangian broadcast gossiping) algorithm reduces communication, computation and data storage cost. We prove convergence for all proposed algorithms and demonstrate by simulations the effectiveness on two applications: l_1-regularized logistic regression for classification and cooperative spectrum sensing for cognitive radio networks.

An unusual delayed complication of paraffin self-injection for penile girth augmentation.

Science.gov (United States)

De Siati, Mario; Selvaggio, Oscar; Di Fino, Giuseppe; Liuzzi, Giuseppe; Massenio, Paolo; Sanguedolce, Francesca; Carrieri, Giuseppe; Cormio, Luigi

2013-12-01

Penile self-injection of various oils is still carried out among Eastern Europe people for penile girth augmentation despite the potential destructive complications of this practice are well known. Penile reactions to such foreign bodies include scarring, abscess formation, ulceration, and even Fournier's gangrene; voiding problems due to mineral oil self-injection have been reported only once. To our knowledge, we describe the first case of paraffin self-injection for penile girth augmentation presenting with acute urinary retention. A 27-year-old Romanian man presented with severe penile pain and acute urinary retention five years after having practiced repeated penile self-injections of paraffin for penile girth augmentation. The penile shaft was massively enlarged, fibrotic and phymotic; urethral catheterization failed due to severe stricture of the proximal pendulum urethra. The patients refused placement of a suprapubic catheter and underwent immediate penile surgical exploration. The scarred tissue between dartos and Buck's fascia and a fibrotic ring occluding the urethra were removed and the penile skin reconstructed. Pathology confirmed the diagnosis of paraffinoma. The patient resumed normal voiding immediately after catheter removal on second postoperative day; he was very pleased with cosmetic, sexual and voiding results at six weeks, six months and 1 year follow-up. The present report describes a novel complication of penile self-injection for penile girth augmentation. Because of the increasing number of patients seeking penile augmentation, physicians dealing with sexual medicine should pay more attention to such request to prevent the use of non medical treatments that can turn into medical disasters.

Augmentation of the Nasal Dorsum Using the Multistrip Autologous Cartilage Technique.

Science.gov (United States)

Liu, Liqiang; Bu, Zhaoyun; Fan, Jincai; Tian, Jia; Gan, Cheng; Yang, Zengjie; Jiao, Hu

2017-12-01

Nasal augmentation is a popular modern technique requested by many Asian people. There are two kinds of autologous cartilage used to augment the nose at present: carved as a monobloc or diced into pieces. Each approach has its pros and cons. The authors performed their surgical technique on a group of 28 patients. Twenty of these patients had undergone rhinoplasties performed before referral to our hospital; eight of these patients had undergone a primary rhinoplasty. Bilateral conchal, nasal septum, or rib cartilage was harvested; deep temporal fascia or abdominal muscle fascia to be prepared for packing stripped cartilage was also removed at this time. The cartilage was placed on a plastic cutting board and cut into strips with a transverse section of 1 × 1 mm. Then, these strips were packed and covered by fascia to form the grafts. The median follow-up was 23 months (range, 12 to 48 months). Twenty-two patients were satisfied with their augmented noses. Through examinations, biopsies, and magnetic resonance imaging scans, less resorption was observed with the multistrip autologous cartilage technique. Junctional stepoffs, excessive prominence, and slanting grafts occurred in three patients, two of whom had revisions. Using multistrip autologous cartilage grafts is an easier method to perform and could be another alternative technique for augmentative and reconstructive rhinoplasties.

Results of cement augmentation and curettage in aneurysmal bone cyst of spine

Directory of Open Access Journals (Sweden)

Saumyajit Basu

2016-01-01

Full Text Available Aneurysmal bone cyst (ABC is a vascular tumor of the spine. Management of spinal ABC still remains controversial because of its location, vascular nature and incidence of recurrence. In this manuscript, we hereby describe two cases of ABC spine treated by curettage, vertebral cement augmentation for control of bleeding and internal stabilization with two years followup. To the best of our knowledge, this is the first case report in the literature describing the role of cement augmentation in spinal ABC in controlling vascular bleeding in curettage of ABC of spine. Case 1: A 22 year old male patient presented with chronic back pain. On radiological investigation, there were multiple, osteolytic septite lesions at L3 vertebral body without neural compression or instability. Percutaneous transpedicular biopsy of L3 from involved pedicle was done. This was followed by cement augmentation through the uninvolved pedicle. Next, transpedicular complete curettage was done through involved pedicle. Case 2: A 15-year-old female presented with nonradiating back pain and progressive myelopathy. On radiological investigation, there was an osteolytic lesion at D9. At surgery, decompression, pedicle screw-rod fixation and posterolateral fusion from D7 to D11 was done. At D9 level, through normal pedicle cement augmentation was added to provide anterior column support and to control the expected bleeding following curettage. Transpedicular complete curettage was done through the involved pedicle with controlled bleeding at the surgical field. Cement augmentation was providing controlled bleeding at surgical field during curettage, internal stabilization and control of pain. On 2 years followup, pain was relieved and there was a stable spinal segment with well filled cement without any sign of recurrence in computed tomography scan. In selected cases of spinal ABC with single vertebral, single pedicle involvement; cement augmentation of vertebra through normal

CIRSE Guidelines on Percutaneous Vertebral Augmentation

Energy Technology Data Exchange (ETDEWEB)

Tsoumakidou, Georgia, E-mail: gtsoumakidou@yahoo.com; Too, Chow Wei, E-mail: spyder55@gmail.com; Koch, Guillaume, E-mail: guillaume.koch@gmail.com; Caudrelier, Jean, E-mail: jean.caudrelier@chru-strasbourg.fr; Cazzato, Roberto Luigi, E-mail: gigicazzato@hotmail.it; Garnon, Julien, E-mail: juliengarnon@gmail.com; Gangi, Afshin, E-mail: gangi@unistra.fr [Strasbourg University Hospital, Interventional Radiology Department (France)

2017-03-15

Vertebral compression fracture (VCF) is an important cause of severe debilitating back pain, adversely affecting quality of life, physical function, psychosocial performance, mental health and survival. Different vertebral augmentation procedures (VAPs) are used in order to consolidate the VCFs, relief pain,and whenever posible achieve vertebral body height restoration. In the present review we give the indications, contraindications, safety profile and outcomes of the existing percutaneous VAPs.

Augmentation Mammaplasty Using Implants: A Review

Directory of Open Access Journals (Sweden)

Susumu Takayanagi

2012-09-01

Full Text Available One of the techniques for augmentation mammaplasty is the procedure using implants. Eventhough this technique has been used for many years, there are still several controversial issuesto be discussed and overcome for patient safety. In this review article, capsular contracture,leak or rupture of the implants, possible systemic disease, relation with breast cancer, andrecent problems with Poly Implant Prothese implants are described and discussed.

Intelligence Context Aware Mobile Navigation using Augmented Reality Technology

Directory of Open Access Journals (Sweden)

Ahmad Hoirul Basori

2018-04-01

Full Text Available Most of the technologies of today’s world, which are enriched with various powerful features and amazing quality characteristics, enables software developers to come up with best possible software solutions, no matter what the context of the particular issue. Technologies such as Augmented Reality (AR, is utilized almost every kind of fields in today’s society. As computers become more advanced through mobile devices and wearable technology, augmented reality will become a seamless experience that is a part of our everyday lives. In the context of this work, an Intelligence mobile navigation application for the King Abdul Aziz University Rabigh is developed enabling the user to find specific locations on campus and offers the ability to explore the campus environment via AR. Furthermore, the system, Mobile Campus Navigation with Augmented Reality application is capable of giving guidance in outdoor location navigating and retrieving details of campus officials and lecturers. With the proposed system, it is expected to serve as a useful and informative navigate helper for both students of King Abdul Aziz University and for the visitors, at outdoor locations and to use as an application to check officials and lecturer availability and retrieve detail about them when they are not available at the office at any time.

PPARα deficiency augments a ketogenic diet-induced circadian PAI-1 expression possibly through PPARγ activation in the liver

International Nuclear Information System (INIS)

Oishi, Katsutaka; Uchida, Daisuke; Ohkura, Naoki; Horie, Shuichi

2010-01-01

Research highlights: → PPARα deficiency augments a ketogenic diet-induced circadian PAI-1 expression. → Hepatic expressions of PPARγ and PCG-1α are induced by a ketogenic diet. → PPARγ antagonist attenuates a ketogenic diet-induced PAI-1 expression. → Ketogenic diet advances the phase of circadian clock in a PPARα-independent manner. -- Abstract: An increased level of plasminogen activator inhibitor-1 (PAI-1) is considered a risk factor for cardiovascular diseases, and PAI-1 gene expression is under the control of molecular circadian clocks in mammals. We recently showed that PAI-1 expression is augmented in a phase-advanced circadian manner in mice fed with a ketogenic diet (KD). To determine whether peroxisome proliferator-activated receptor α (PPARα) is involved in hypofibrinolytic status induced by a KD, we examined the expression profiles of PAI-1 and circadian clock genes in PPARα-null KD mice. Chronic administration of bezafibrate induced the PAI-1 gene expression in a PPARα-dependent manner. Feeding with a KD augmented the circadian expression of PAI-1 mRNA in the hearts and livers of wild-type (WT) mice as previously described. The KD-induced mRNA expression of typical PPARα target genes such as Cyp4A10 and FGF21 was damped in PPARα-null mice. However, plasma PAI-1 concentrations were significantly more elevated in PPARα-null KD mice in accordance with hepatic mRNA levels. These observations suggest that PPARα activation is dispensable for KD-induced PAI-1 expression. We also found that hyperlipidemia, fatty liver, and the hepatic expressions of PPARγ and its coactivator PCG-1α were more effectively induced in PPARα-null, than in WT mice on a KD. Furthermore, KD-induced hepatic PAI-1 expression was significantly suppressed by supplementation with bisphenol A diglycidyl ether, a PPARγ antagonist, in both WT and PPARα-null mice. PPARγ activation seems to be involved in KD-induced hypofibrinolysis by augmenting PAI-1 gene expression

Intelligent Augmented Reality Training for Motherboard Assembly

Science.gov (United States)

Westerfield, Giles; Mitrovic, Antonija; Billinghurst, Mark

2015-01-01

We investigate the combination of Augmented Reality (AR) with Intelligent Tutoring Systems (ITS) to assist with training for manual assembly tasks. Our approach combines AR graphics with adaptive guidance from the ITS to provide a more effective learning experience. We have developed a modular software framework for intelligent AR training…

E-learning as augmentation rather than disruption

DEFF Research Database (Denmark)

Heilesen, Simon; Josephsen, Jens

2007-01-01

levels. And that this may well account for some of the present disillusionment with e-learning. Further, we argue that e-learning already has had a significant impact on our world view and understanding of education and that questions of augmentation or disruption should be studied over a long period...

Augmented reality-assisted bypass surgery: embracing minimal invasiveness.

Science.gov (United States)

Cabrilo, Ivan; Schaller, Karl; Bijlenga, Philippe

2015-04-01

The overlay of virtual images on the surgical field, defined as augmented reality, has been used for image guidance during various neurosurgical procedures. Although this technology could conceivably address certain inherent problems of extracranial-to-intracranial bypass procedures, this potential has not been explored to date. We evaluate the usefulness of an augmented reality-based setup, which could help in harvesting donor vessels through their precise localization in real-time, in performing tailored craniotomies, and in identifying preoperatively selected recipient vessels for the purpose of anastomosis. Our method was applied to 3 patients with Moya-Moya disease who underwent superficial temporal artery-to-middle cerebral artery anastomoses and 1 patient who underwent an occipital artery-to-posteroinferior cerebellar artery bypass because of a dissecting aneurysm of the vertebral artery. Patients' heads, skulls, and extracranial and intracranial vessels were segmented preoperatively from 3-dimensional image data sets (3-dimensional digital subtraction angiography, angio-magnetic resonance imaging, angio-computed tomography), and injected intraoperatively into the operating microscope's eyepiece for image guidance. In each case, the described setup helped in precisely localizing donor and recipient vessels and in tailoring craniotomies to the injected images. The presented system based on augmented reality can optimize the workflow of extracranial-to-intracranial bypass procedures by providing essential anatomical information, entirely integrated to the surgical field, and help to perform minimally invasive procedures. Copyright © 2015 Elsevier Inc. All rights reserved.

Projector augmented wave method: ab initio molecular dynamics ...

Indian Academy of Sciences (India)

Unknown

kinetic energy is small and the wave function is smooth. However, the wave ... and various strategies have been developed. ... methods let us briefly review the history of augmented ..... alleviated by adding an intelligent zero: If an operator B.

Soft tissue augmentation - Use of hyaluronic acid as dermal filler

Directory of Open Access Journals (Sweden)

Vedamurthy Maya

2004-11-01

Full Text Available Soft tissue augmentation has revolutionized the treatment of the aging face. It is a technique in which a substance is injected under the skin. The concept of utilizing materials for soft tissue augmentation actually began around 1950 with the use of fluid silicone. Today we have a large armamentarium of implant materials to delay the tell tale signs of aging. Filling has replaced conventional surgery in facial rejuvenation. In this article, the emphasis will be on hyaluronic acid as this substance is easily available in India and ranks among the most widely used dermal fillers.

Soft tissue augmentation - Use of hyaluronic acid as dermal filler

Directory of Open Access Journals (Sweden)

Vedamurthy Maya

2004-01-01

Full Text Available Soft tissue augmentation has revolutionized the treatment of the aging face. It is a technique in which a substance is injected under the skin. The concept of utilizing materials for soft tissue augmentation actually began around 1950 with the use of fluid silicone. Today we have a large armamentarium of implant materials to delay the tell tale signs of aging. Filling has replaced conventional surgery in facial rejuvenation. In this article, the emphasis will be on hyaluronic acid as this substance is easily available in India and ranks among the most widely used dermal fillers.

Twitter-Augmented Journal Club: Educational Engagement and Experience So Far.

Science.gov (United States)

Udani, Ankeet D; Moyse, Daniel; Peery, Charles Andrew; Taekman, Jeffrey M

2016-04-15

Social media is a nascent medical educational technology. The benefits of Twitter include (1) easy adoption; (2) access to experts, peers, and patients across the globe; (3) 24/7 connectivity; (4) creation of virtual, education-based communities using hashtags; and (5) crowdsourcing information using retweets. We report on a novel Twitter-augmented journal club for anesthesia residents: its design, implementation, and impact. Our inaugural anesthesia Twitter-augmented journal club succeeded in engaging the anesthesia community and increasing residents' professional use of Twitter. Notably, our experience suggests that anesthesia residents are willing to use social media for their education.

“Messing with the mind”: evolutionary challenges to human brain augmentation

OpenAIRE

Saniotis, Arthur; Henneberg, Maciej; Kumaratilake, Jaliya; Grantham, James P.

2014-01-01

The issue of brain augmentation has received considerable scientific attention over the last two decades. A key factor to brain augmentation that has been widely overlooked are the complex evolutionary processes which have taken place in evolving the human brain to its current state of functioning. Like other bodily organs, the human brain has been subject to the forces of biological adaptation. The structure and function of the brain, is very complex and only now we are beginning to understa...

Usability Engineering of Text Drawing Styles in Augmented Reality User Interfaces

OpenAIRE

Gabbard, Joseph L.

2008-01-01

In the coming years, augmented reality, mobile computing, and related technologies have the potential to completely redefine how we interact with and use computers. No longer will we be bound to desktops and laptops, nor will we be bound to monitors, two-dimensional (2D) screens, and graphical user interface (GUI) backgrounds. Instead we will employ wearable systems to move about and augmented reality displays to overlay 2D and three-dimensional (3D) graphics onto the real world. Whe...

Augmented reality system

Science.gov (United States)

Lin, Chien-Liang; Su, Yu-Zheng; Hung, Min-Wei; Huang, Kuo-Cheng

2010-08-01

In recent years, Augmented Reality (AR)[1][2][3] is very popular in universities and research organizations. The AR technology has been widely used in Virtual Reality (VR) fields, such as sophisticated weapons, flight vehicle development, data model visualization, virtual training, entertainment and arts. AR has characteristics to enhance the display output as a real environment with specific user interactive functions or specific object recognitions. It can be use in medical treatment, anatomy training, precision instrument casting, warplane guidance, engineering and distance robot control. AR has a lot of vantages than VR. This system developed combines sensors, software and imaging algorithms to make users feel real, actual and existing. Imaging algorithms include gray level method, image binarization method, and white balance method in order to make accurate image recognition and overcome the effects of light.

Advances in bone augmentation to enable dental implant placement: Consensus Report of the Sixth European Workshop on Periodontology.

Science.gov (United States)

Tonetti, Maurizio S; Hämmerle, Christoph H F

2008-09-01

Bone augmentation procedures to enable dental implant placement are frequently performed in practice. In this session the European Workshop on Periodontology discussed the evidence in support of the procedures and examined both adverse events and implant performance in the augmented bone. While the available evidence improved both in quantity and quality since previous workshops the conclusions that could be drawn were limited by elements of design and/or reporting that are amenable to improvement. With regards to lateral bone augmentation, a sizable body of evidence supports its use to enable dental implant placement. The group recognized the potential for vertical ridge augmentation procedures to allow implant placement in clinical practice but questioned the applicability of these data to a wider array of operators and clinical settings. With regards to sinus floor augmentation, perforation of the sinus membrane, graft infection and graft loss resulting in inability of implant placement were the major reported adverse events. In cases with dental implants placed in pristine sites. The consensus emphasized the research need to answer questions on: (i) long-term performance of dental implants placed in augmented bone; (ii) the clinical performance of dental implants placed in augmented or pristine sites; and (iii) the clinical benefits of bone augmentation with respect to alternative treatments.

Augmentation of catecholamine release elicited by an Eugenia punicifolia extract in chromaffin cells

Directory of Open Access Journals (Sweden)

Ricardo de Pascual

2011-10-01

Full Text Available Plant extracts of Eugenia punicifolia (Kunth DC., Myrtaceae, are used in Amazon region of Brazil to treat diarrhea and stomach disturbances, and as hypoglycemic medicine. We have recently shown that an aqueous extract of E. punicifolia augmented cholinergic neurotransmission in a rat phrenic nerve-diaphragm preparation. In this study, we investigated the effects of an E. punicifolia dichloromethane extract (EPEX in a neuronal model of cholinergic neurotransmission, the bovine adrenal chromaffin cell. EPEX augmented the release of catecholamine triggered by acetylcholine (ACh pulses but did not enhance ACh-evoked inward currents, which were inhibited by 30%. Since EPEX did not cause a blockade of acetylcholinesterase or butyrylcholinesterase, it seems that EPEX is not directly activating the cholinergic system. EPEX also augmented K+-elicited secretion without enhancing the whole-cell inward calcium current. This novel and potent effect of EPEX in enhancing exocytosis might help to identify the active component responsible for augmenting exocytosis. When elucidated, the molecular structure of this active principle could serve as a template to synthesise novel compounds to regulate the exocytotic release of neurotransmitters.

Determination of Student Opinions in Augmented Reality

Science.gov (United States)

Bicen, Huseyin; Bal, Erkan

2016-01-01

The rapid development of the new technology has changed classroom teaching methods and tools in a positive way. This study investigated the classroom learning with augmented reality and the impact of student opinions. 97 volunteer undergraduate students took part in this study. Results included data in the form of frequencies, percentages and…

Get Real: Augmented Reality for the Classroom

Science.gov (United States)

Mitchell, Rebecca; DeBay, Dennis

2012-01-01

Kids love augmented reality (AR) simulations because they are like real-life video games. AR simulations allow students to learn content while collaborating face to face and interacting with a multimedia-enhanced version of the world around them. Although the technology may seem advanced, AR software makes it easy to develop content-based…

Indeterminacy and labor augmenting externalities

DEFF Research Database (Denmark)

Poulsen, Odile; Goenka, Aditya

2002-01-01

In this two-sector discrete time model of endogenous economic growth intersectoral effects are assumed to be "labor augmenting" We derive necessary and sufficient conditions for local indeterminacy and multiplicity of the balanced growth path in terms of factor intensities in both sectors....... The balanced growth path is unique if the consumption good sector is more capital intensive. However, it can be indeterminate. When the investment good sector is more capital intensive a sufficient condition for indeterminacy is that there exists at least three balanced growth paths....

Technology Acceptance of Augmented Reality and Wearable Technologies

NARCIS (Netherlands)

Wild, Fridolin; Klemke, Roland; Lefrere, Paul; Fominykh, Mikhail; Kuula, Timo

2017-01-01

Augmented Reality and Wearables are the recent media and computing technologies, similar, but different from established technologies, even mobile computing and virtual reality. Numerous proposals for measuring technology acceptance exist, but have not been applied, nor fine-tuned to such

Comparison of Four Strong Acids on the Precipitation Potential of Gypsum in Brines During Distillation of Pretreated, Augmented Urine

Science.gov (United States)

Muirhead, Dean; Carrier, Christopher

2012-01-01

In this study, three different mineral acids were substituted for sulfuric acid (H2SO4) in the urine stabilizer solution to eliminate the excess of sulfate ions in pretreated urine and assess the impact on maximum water recovery to avoid precipitation of minerals during distillation. The study evaluated replacing 98% sulfuric acid with 85% phosphoric acid (H3PO4), 37% hydrochloric acid (HCl), or 70% nitric acid (HNO3). The effect of lowering the oxidizer concentration in the pretreatment formulation also was studied. This paper summarizes the test results, defines candidate formulations for further study, and specifies the injection masses required to stabilize urine and minimize the risk of mineral precipitation during distillation. In the first test with a brine ersatz acidified with different acids, the solubility of calcium in gypsum saturated solutions was measured. The solubility of gypsum was doubled in the brines acidified with the alternative acids compared to sulfuric acid. In a second series of tests, the alternative acid pretreatment concentrations were effective at preventing precipitation of gypsum and other minerals up to 85% water recovery from 95th-percentile pretreated, augmented urine. Based on test results, phosphoric acid is recommended as the safest alternative to sulfuric acid. It also is recommended that the injected mass concentration of chromium trioxide solution be reduced by 75% to minimize liquid resupply mass by about 50%, reduce toxicity of brines, and reduce the concentration of organic acids in distillate. The new stabilizer solution formulations and required doses to stabilize urine and prevent precipitation of minerals up to 85% water recovery are given. The formulations in this study were tested on a limited number of artificially augmented urine batches collected from employees at the Johnson Space Center (JSC). This study successfully demonstrated that the desired physical and chemical stability of pretreated urine and brines

A novel augmented reality system for displaying inferior alveolar nerve bundles in maxillofacial surgery.

Science.gov (United States)

Zhu, Ming; Liu, Fei; Chai, Gang; Pan, Jun J; Jiang, Taoran; Lin, Li; Xin, Yu; Zhang, Yan; Li, Qingfeng

2017-02-15

Augmented reality systems can combine virtual images with a real environment to ensure accurate surgery with lower risk. This study aimed to develop a novel registration and tracking technique to establish a navigation system based on augmented reality for maxillofacial surgery. Specifically, a virtual image is reconstructed from CT data using 3D software. The real environment is tracked by the augmented reality (AR) software. The novel registration strategy that we created uses an occlusal splint compounded with a fiducial marker (OSM) to establish a relationship between the virtual image and the real object. After the fiducial marker is recognized, the virtual image is superimposed onto the real environment, forming the "integrated image" on semi-transparent glass. Via the registration process, the integral image, which combines the virtual image with the real scene, is successfully presented on the semi-transparent helmet. The position error of this navigation system is 0.96 ± 0.51 mm. This augmented reality system was applied in the clinic and good surgical outcomes were obtained. The augmented reality system that we established for maxillofacial surgery has the advantages of easy manipulation and high accuracy, which can improve surgical outcomes. Thus, this system exhibits significant potential in clinical applications.

Adaptive Augmented Reality enabled electronic Procedure Toolset, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The proposed research is aimed at investigating the feasibility to provide an integrated tool suite for development of Adaptive user interfaces for Augmented Reality...

The biomechanical effects of polytetrafluoroethylene suture augmentations in lateral-row rotator cuff repairs in an ovine model.

Science.gov (United States)

Beimers, Lijkele; Lam, Patrick H; Murrell, George A C

2014-10-01

This study investigated the biomechanical effects of expanded polytetrafluoroethylene (ePTFE) suture augmentation patches in rotator cuff repair constructs. The infraspinatus tendon in 24 cadaveric ovine shoulders was repaired using an inverted horizontal mattress suture with 2 knotless bone anchors (ArthroCare, Austin, TX, USA) in a lateral-row configuration. Four different repair groups (6 per group) were created: (1) standard repair using inverted horizontal mattress sutures, (2) repair with ePTFE suture augmentations on the bursal side of the tendon, (3) repair with ePTFE suture augmentations on the articular side, and, (4) repair with ePTFE suture augmentations on both sides of the tendon. Footprint contact pressure, stiffness, and the load to failure of the repair constructs were measured. Repairs with ePTFE suture augmentations on the bursal side exerted significantly more footprint contact pressure (0.40 ± 0.01 MPa) than those on the articular side (0.34 ± 0.02 MPa, P = .04) and those on both sides (0.33 ± 0.02 MPa, P = .01). At 15 degrees of abduction, ePTFE-augmented repairs on the bursal side had higher footprint contact pressure (0.26 ± 0.03 MPa) compared with standard repairs (0.15 ± 0.02 MPa, P = .01) and with ePTFE-augmented repairs on the articular side (0.18 ± 0.02 MPa, P = .03). The ePTFE-augmented repairs on the bursal side demonstrated significantly higher failure loads (178 ± 18 N) than standard repairs (120 ± 17 N, P = .04). Inverted horizontal mattress sutures augmented with ePTFE patches on the bursal side of the tendon enhanced footprint contact pressures and the ultimate load to failure of lateral-row rotator cuff repairs in an ovine model. Copyright © 2014 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

Augmentation Mammaplasty Using Implants: A Review

Directory of Open Access Journals (Sweden)

Susumu Takayanagi

2012-09-01

Full Text Available One of the techniques for augmentation mammaplasty is the procedure using implants. Even though this technique has been used for many years, there are still several controversial issues to be discussed and overcome for patient safety. In this review article, capsular contracture, leak or rupture of the implants, possible systemic disease, relation with breast cancer, and recent problems with Poly Implant Prothese implants are described and discussed.

MARCS: Mobile Augmented Reality for Cybersecurity

OpenAIRE

Mattina, Brendan Casey

2017-01-01

Network analysts have long used two-dimensional security visualizations to make sense of network data. As networks grow larger and more complex, two-dimensional visualizations become more convoluted, potentially compromising user situational awareness of cyber threats. To combat this problem, augmented reality (AR) can be employed to visualize data within a cyber-physical context to restore user perception and improve comprehension; thereby, enhancing cyber situational awareness. Multiple gen...

GM-CSF augments the immunosuppressive capacity of neonatal spleen cells in vitro

International Nuclear Information System (INIS)

Morrissey, P.J.; Ireland, R.

1991-01-01

Addition of exogenous granulocyte-macrophage colony stimulating factor (GM-CSF) to cultures of adult murine spleen cells with sheep red blood cells (SRBC) results in an augmented plaque forming cell (PFC) response. The influence of GM-CSF on the ability of neonatal spleen cells to suppress the anti-SRBC plaque forming response of adult spleen cells was tested by adding GM-CSF to cultures of neonatal and adult spleen cells. The suppressive capacity of the neonatal spleen cells was augmented by exogenous GM-CSF. The augmented suppression of the neonatal spleen cells was dependent on a G-10 adherent population since the addition of GM-CSF to cultures containing G-10 passed neonatal spleen cells resulted in an augmented PFC response and not suppression. Neonatal splenic glass adherent cells were also capable of suppressing the response. Neonatal spleen cells or purified neonatal glass adherent spleen cells cultured in the presence of GM-CSF had markedly increased levels of PGE2 in the culture supernatant. Neonatal spleen cells cultured with GM-CSF had increased numbers of morphologically identifiable macrophages after 48 hr of culture. Both irradiation and G-10 passage of the neonatal spleen diminished the numbers of macrophages formed in response to GM-CSF, and both of these manipulations resulted in reversal of suppression in response to GM-CSF. Thus, the augmented suppressive capacity of neonatal spleen cells in response to GM-CSF is probably mediated by its ability to drive monocyte to macrophage differentiation as well as increase the suppressive capacity of the existing neonatal splenic macrophages by increasing their production of PGE2

Localized ridge defect augmentation using human pericardium membrane and demineralized bone matrix.

Science.gov (United States)

Vidyadharan, Arun Kumar; Ravindran, Anjana

2014-01-01

Patient wanted to restore her lost teeth with implants in the lower left first molar and second premolar region. Cone beam computerized tomography (CBCT) revealed inadequate bone width and height around future implant sites. The extraction socket of second premolar area revealed inadequate socket healing with sparse bone fill after 4 months of extraction. To evaluate the clinical feasibility of using a collagen physical resorbable barrier made of human pericardium (HP) to augment localized alveolar ridge defects for the subsequent placement of dental implants. Ridge augmentation was done in the compromised area using Puros® demineralized bone matrix (DBM) Putty with chips and an HP allograft membrane. Horizontal (width) and vertical hard tissue measurements with CBCT were recorded on the day of ridge augmentation surgery, 4 month and 7 months follow-up. Intra oral periapical taken 1 year after implant installation showed minimal crestal bone loss. Bone volume achieved through guided bone regeneration was a gain of 4.8 mm horizontally (width) and 6.8 mm vertically in the deficient ridge within a period of 7 months following the procedure. The results suggested that HP Allograft membrane may be a suitable component for augmentation of localized alveolar ridge defects in conjunction with DBM with bone chips.

MRI diagnosis of the complications of polyamide hydrogel injection for augmentation mammoplasty

International Nuclear Information System (INIS)

Chen Xueqiang; Chen Pingyou; Zhang Yunshu; Luo Qinghua; Xu Rong

2005-01-01

Objective: To analyze MRI findings and its clinical significance in complications of polyamide hydrogel injection for augmentation mammoplasty. Methods: The complication findings of MR imaging in 20 cases with polyamide hydrogel injection for augmentation mammoplasty were retrospectively reviewed and analyzed. Results: In 20 patients, 26 breasts suffered from complications, including infection (n=5) with pieces of long T 1 and long T 2 signals, aseptic inflammation (n=2) with pieces of slight long T 1 and moderate T 2 signals, hard nodule (n=10) with long T 1 and long T 2 signals, and rupture (n=5) with pieces and nodes of long T 1 and long T 2 signals on MR images. Conclusion: MRI has the great diagnostic value in the detection of complications after polyamide hydrogel injection for augmentation mammoplasty, and it should be taken as the first diagnostic choice. (authors)

Augmented twin-nonlinear two-box behavioral models for multicarrier LTE power amplifiers.

Science.gov (United States)

Hammi, Oualid

2014-01-01

A novel class of behavioral models is proposed for LTE-driven Doherty power amplifiers with strong memory effects. The proposed models, labeled augmented twin-nonlinear two-box models, are built by cascading a highly nonlinear memoryless function with a mildly nonlinear memory polynomial with cross terms. Experimental validation on gallium nitride based Doherty power amplifiers illustrates the accuracy enhancement and complexity reduction achieved by the proposed models. When strong memory effects are observed, the augmented twin-nonlinear two-box models can improve the normalized mean square error by up to 3 dB for the same number of coefficients when compared to state-of-the-art twin-nonlinear two-box models. Furthermore, the augmented twin-nonlinear two-box models lead to the same performance as previously reported twin-nonlinear two-box models while requiring up to 80% less coefficients.

The Wearable World in the Palm of our Hand: The Perceived Importance of Augmented Reality in Marketing Strategies

Directory of Open Access Journals (Sweden)

Fernando Bandeira, Ph.D

2013-07-01

Full Text Available The present article refers to an exploratory study of the perceived importance of augmented reality for marketing strategies, namely in what concern: costs, branding, communications and product versus immersion, body, wearable and blended augmented reality. It starts with the theoretical framework for augmented reality, followed by the design and research methodology; it then proceeds with the analyses and comment of data gathered, and at the end, it refers to the research limitations and perspectives. Results point out that augmented reality is not perceived as an outstanding tool for marketing nor as an investment with high benefits, nevertheless it is seen as pertinent for blended marketing and immersive augmented reality gathering some sympathy from respondents.

Human Performance Assessments when Using Augmented Reality for Navigation

National Research Council Canada - National Science Library

Goldiez, Brian F; Saptoka, Nabin; Aedunuthula, Prashanth

2006-01-01

Human performance executing search and rescue type of navigation is one area that can benefit from augmented reality technology when the proper computer generated information is added to a real scene...

Problems Inherent to Augmentation of Natural Enemies in Open Agriculture.

Science.gov (United States)

Michaud, J P

2018-04-01

Augmentation biological control has successfully replaced a lot of insecticide use in 'closed system' agriculture (e.g., greenhouses). The profitable commercialization of biocontrol agents in greenhouses has created an incentive to expand markets for mass-reared beneficial insects into open agricultural systems, often without sufficient scientific justification. However, the semi-contained nature of greenhouse culture is often critical to the success of augmentation and can serve to mask potential pitfalls and intrinsic limitations of this approach in open systems. Factors contributing to greenhouse successes include the reduced biological diversity of contained agroecosystems, the prevention of agent dispersal, the ability to maintain environmental conditions within a range favorable for the agent, the exclusion of competitors and natural enemies of the agent that might otherwise diminish its efficacy, and the absence of alternative prey/hosts that could divert predation/parasitism from the target pest. There are also problems arising from collection of source material from locally adapted populations, and the inadvertent imposition of artificial selection in the course of laboratory rearing. Besides highlighting these pitfalls, this paper aims to encourage more consideration of conservation approaches prior to investment in augmentation programs which entice farmers into perpetual cycles of 'rear and release.' I argue that although augmentation can benefit agriculture whenever it replaces pesticide applications, it does not constitute an ecologically sustainable solution because it requires continued inputs, and it can distract research attention away from more sustainable objectives. Sustainable biological control is best achieved through modifications to cultural practices that increasingly 'naturalize' agroecosystems, thus facilitating the natural recruitment and persistence of beneficial arthropod fauna, combined with habitat management geared to increasing

Here Comes the Hyper-Connected Augmented Consumer

Directory of Open Access Journals (Sweden)

Stephen Andrew T.

2017-11-01

Full Text Available Consumers have become always on and constantly connected. Search costs have plummeted, individuals’ abilities to digitally express themselves and their opinions increased, and the opportunities for superior business and market intelligence for companies have skyrocketed. This has given rise to more, richer, and new sources of consumer data that marketers can leverage, and has fueled the data-driven insights revolution in marketing. But there is more to come very soon. In marketing, we are quickly moving from the age of the connected consumer to the age of the augmented consumer. New technologies like wearable devices, smart sensors, consumer IoT devices, smart homes, and, critically, artificial intelligence ecosystems will not only connect, but will substantially and meaningfully augment the consumer in terms of their thoughts and behaviors. The biggest challenge for marketers will lie in how they approach marketing to this new type of consumer, particularly personal artificial intelligence ecosystems. This means marketing to algorithms, instead of people, and that is very different to how most marketing work is currently done.

Flow interaction of diffuser augmented wind turbines

Science.gov (United States)

Göltenbott, U.; Ohya, Y.; Yoshida, S.; Jamieson, P.

2016-09-01

Up-scaling of wind turbines has been a major trend in order to reduce the cost of energy generation from the wind. Recent studies however show that for a given technology, the cost always rises with upscaling, notably due to the increased mass of the system. To reach capacities beyond 10 MW, multi-rotor systems (MRS) have promising advantages. On the other hand, diffuser augmented wind turbines (DAWTs) can significantly increase the performance of the rotor. Up to now, diffuser augmentation has only been applied to single small wind turbines. In the present research, DAWTs are used in a multi-rotor system. In wind tunnel experiments, the aerodynamics of two and three DAWTs, spaced in close vicinity in the same plane normal to a uniform flow, have been analysed. Power increases of up to 5% and 9% for the two and three rotor configurations are respectively achieved in comparison to a stand-alone turbine. The physical dynamics of the flows are analysed on the basis of the results obtained with a stand-alone turbine.

CNN-SVM for Microvascular Morphological Type Recognition with Data Augmentation.

Science.gov (United States)

Xue, Di-Xiu; Zhang, Rong; Feng, Hui; Wang, Ya-Lei

2016-01-01

This paper focuses on the problem of feature extraction and the classification of microvascular morphological types to aid esophageal cancer detection. We present a patch-based system with a hybrid SVM model with data augmentation for intraepithelial papillary capillary loop recognition. A greedy patch-generating algorithm and a specialized CNN named NBI-Net are designed to extract hierarchical features from patches. We investigate a series of data augmentation techniques to progressively improve the prediction invariance of image scaling and rotation. For classifier boosting, SVM is used as an alternative to softmax to enhance generalization ability. The effectiveness of CNN feature representation ability is discussed for a set of widely used CNN models, including AlexNet, VGG-16, and GoogLeNet. Experiments are conducted on the NBI-ME dataset. The recognition rate is up to 92.74% on the patch level with data augmentation and classifier boosting. The results show that the combined CNN-SVM model beats models of traditional features with SVM as well as the original CNN with softmax. The synthesis results indicate that our system is able to assist clinical diagnosis to a certain extent.

"Combined Occlusion and Atropine Therapy" Versus "Augmented Part-Time Patching" in Children with Refractory/Residual Amblyopia: A Pilot Study.

Science.gov (United States)

Sachdeva, Virender; Mittal, Vaibhev; Gupta, Varun; Gunturu, Rekha; Kekunnaya, Ramesh; Chandrasekharan, Anjali; Chabblani, Preeti Patil; Rao, Harsha L

2016-01-01

To compare the efficacy of combined occlusion and atropine therapy (COAT) and augmented part-time patching for the treatment of unilateral refractory/residual amblyopia. This retrospective study evaluated children between 4 and 11 years with refractory/residual amblyopia who were treated with either additional atropine (COAT group) or increased hours of patching (augmented group). Data were collected on improvement in best-corrected visual acuity (BCVA; logarithm of the minimum angle of resolution [logMAR] units) at each follow-up visit. There were 19 children in the COAT group and 17 children in the augmented group. The baseline BCVA of the amblyopic eye was 0.79 ± 0.36 logMAR in the COAT group and 0.72 ± 0.26 logMAR in augmented group. Children were statistically significantly younger in the COAT group (6.4 ± 2.2 years) compared to the augmented group (8.6 ± 3.3 years, P = 0.02). The mean duration of follow-up was statistically significantly longer in the augmented group (20.2 COAT group; 13.9 months augmented group) (P = 0.03). Compliance was similar in both groups. LogMAR BCVA (adjusted for difference in age and baseline BCVA) was statistically significantly better in the COAT group (0.56 ± 0.04) compared to the augmented group (0.80 ± 0.04) at 3 months (P = 0.000); 6 months (COAT group, 0.50 ± 0.04 vs. augmented group, 0.74 ± 0.04; P = 0.04) and at 1 year (COAT group, 0.42 ± 0.04 vs. augmented group, 0.67 ± 0.04, P = 0.000). There was statistically significantly greater improvement in logMAR BCVA at 6 months in COAT group (0.26 ± 0.15) compared to the augmented group (0.02 ± 0.14), (P = 0.0002). Age, gender, pretreatment BCVA, duration of follow-up, or compliance to patching did not affect improvement in BCVA. COAT may result in greater improvement in BCVA than augmented part-time patching in children with unilateral residual/refractory amblyopia.

Power system stabilising features from wind power plants augmented with energy storage

DEFF Research Database (Denmark)

Tarnowski, Germán C.; Kjær, Philip C; Lærke, Rasmus

2014-01-01

This paper describes a wind power plant augmented with energy storage, configured to provide ancillary services (primary reserve, inertial response, power oscillation damping) for enhancement of power system stability. Energy storage can complement wind power plants thus reducing the need for any...... overload or curtailment to allow active power modulation. A 12MW + 1.6MW augmented plant is used for demonstration of representative performance of the particular ancillary service control algorithms...

Augmented reality social story for autism spectrum disorder

Science.gov (United States)

Syahputra, M. F.; Arisandi, D.; Lumbanbatu, A. F.; Kemit, L. F.; Nababan, E. B.; Sheta, O.

2018-03-01

Augmented Reality is a technique that can bring social story therapy into virtual world to increase intrinsic motivation of children with Autism Spectrum Disorder(ASD). By looking at the behaviour of ASD who will be difficult to get the focus, the lack of sensory and motor nerves in the use of loads on the hands or other organs will be very distressing children with ASD in doing the right activities, and interpret and understand the social situation in determining a response appropriately. Required method to be able to apply social story on therapy of children with ASD that is implemented with Augmented Reality. The output resulting from this method is 3D animation (three-dimensional animation) of social story by detecting marker located in special book and some simple game which done by using leap motion controller which is useful in reading hand movement in real-time.

Augmenting the salt tolerance in wheat ( Triticum aestivum ) through ...

African Journals Online (AJOL)

Augmenting the salt tolerance in wheat ( Triticum aestivum ) through exogenously applied silicon. ... African Journal of Biotechnology ... physiology and biochemistry of wheat genotypes (salt sensitive; Auqab-2000 and salt tolerant; SARC-5) ...

Mobile Augmented Reality in Supporting Peer Assessment: An Implementation in a Fundamental Design Course

Science.gov (United States)

Lan, Chung-Hsien; Chao, Stefan; Kinshuk; Chao, Kuo-Hung

2013-01-01

This study presents a conceptual framework for supporting mobile peer assessment by incorporating augmented reality technology to eliminate limitation of reviewing and assessing. According to the characteristics of mobile technology and augmented reality, students' work can be shown in various ways by considering the locations and situations. This…

Erythropoietin augments the cytokine response to acute endotoxin-induced inflammation in humans

DEFF Research Database (Denmark)

Hojman, Pernille; Taudorf, Sarah; Lundby, Carsten

2009-01-01

in a human in vivo model of acute systemic low-grade inflammation, we measured circulating inflammatory mediators after intravenous administration of Escherichia coli endotoxin (LPS) bolus injection (0.1 ng/kg of body weight) in young healthy male subjects. The subjects were divided into three groups...... receiving either (1) LPS alone, (2) EPO alone (15,000 IE of rHuEPO) or (3) EPO and LPS. Endotoxin administration alone induced a 3-, 12- and 5-fold increase in plasma concentrations of TNF-alpha, IL-6 and IL-10, respectively, 3h after LPS challenge. When EPO was given prior to a bolus injection...... with endotoxin, the levels of TNF-alpha and IL-6 were enhanced by 5- and 40-fold, respectively, whereas the endotoxin-induced increase in IL-10 response was not influenced by EPO. In contrast to our hypothesis, we find that EPO augments the acute inflammatory effect....

Augmented reality in bone tumour resection

Science.gov (United States)

Park, Y. K.; Gupta, S.; Yoon, C.; Han, I.; Kim, H-S.; Choi, H.; Hong, J.

2017-01-01

Objectives We evaluated the accuracy of augmented reality (AR)-based navigation assistance through simulation of bone tumours in a pig femur model. Methods We developed an AR-based navigation system for bone tumour resection, which could be used on a tablet PC. To simulate a bone tumour in the pig femur, a cortical window was made in the diaphysis and bone cement was inserted. A total of 133 pig femurs were used and tumour resection was simulated with AR-assisted resection (164 resection in 82 femurs, half by an orthropaedic oncology expert and half by an orthopaedic resident) and resection with the conventional method (82 resection in 41 femurs). In the conventional group, resection was performed after measuring the distance from the edge of the condyle to the expected resection margin with a ruler as per routine clinical practice. Results The mean error of 164 resections in 82 femurs in the AR group was 1.71 mm (0 to 6). The mean error of 82 resections in 41 femurs in the conventional resection group was 2.64 mm (0 to 11) (p Augmented reality in bone tumour resection: An experimental study. Bone Joint Res 2017;6:137–143. PMID:28258117