WorldWideScience

Sample records for augmented nerve-mediated relaxation

  1. Relaxed core projector-augmented-wave method

    Science.gov (United States)

    Marsman, M.; Kresse, G.

    2006-09-01

    We extend the full-potential projector-augmented-wave method beyond the frozen core approximation, i.e., include the self-consistent optimization of the core charge density, in such a manner that the valence wave functions remain orthogonal to the core. The method consists of an on-the-fly repseudization of the all-electron problem, solving for the self-consistent core charge density within a spherical approximation. The key ideas in our procedure are to keep the projector functions fixed throughout the electronic minimization and to derive the new pseudopartial waves from these original projector functions, at each step of the electronic minimization procedure. Results of relaxed core calculations for atomic interconfigurational energies, structural energy differences between bulk phases of Fe, atomization energies of a subset of Pople's G2-1 set, and the Rh 3d surface core level shifts for the (√3 ×√3 )-Rh(111) surface at 1/3 CO coverage are presented.

  2. Augmented postcard

    OpenAIRE

    Bernik , Aleš

    2012-01-01

    The aim of this thesis is the examination of augmented reality technology, which allows us mixing real and virtual elements. Augmented reality is a relatively new technology which is becoming more widespread, thanks to a fairly reasonable price of smart phones. Here we presents the types of augmented reality, the necessary technology and their advantages and disadvantages, its current use in applications, and software for building augmented reality applications. The thesis is mainly focuse...

  3. Differential sensitivity of myosin-heavy-chain-typed fibers to distinct aggregates of nerve-mediated activation.

    Science.gov (United States)

    Dunn, S E; Michel, R N

    1999-02-01

    We studied the regulatory effects of nerve-mediated activity on the early expression of embryonic and adult myosin heavy chains (MHC) within inactive though still innervated rat plantaris and soleus muscle fibers. To this end, we stimulated motor nerves that were quiescent following treatment with tetrodotoxin (TTX) with paradigms designed to partition the influence of neural activation frequency and assessed the selective expression and accumulation of MHCs within muscle fibers using an array of specific antibodies. We show rapid de novo expression of IIx MHC within select soleus fibers in response to high-frequency activation for more than 0.01% of daily time. High-frequency aggregates were also the most effective in preventing the TTX-induced reexpression of embryonic MHCs within specific fibers. Only configurations that included high-frequency trains for more than 0.01% of daily time or combined with 10 Hz stimulation preserved the size of select fibers, used as a measure of the net cellular content of MHC. The effectiveness of this preservation varied according to the muscle type and MHC expressed, and, in a subset of fibers, was influenced by contractile loading status. Our results demonstrate that distinct subsets of MHC-typed fibers are differentially sensitive to the neural activation cues mediating the cellular expression of these proteins.

  4. Augmented Reality

    DEFF Research Database (Denmark)

    Kjærgaard, Hanne Wacher; Kjeldsen, Lars Peter Bech; Rahn, Annette

    2015-01-01

    This chapter describes the use of iPad-facilitated application of augmented reality in the teaching of highly complex anatomical and physiological subjects in the training of nurses at undergraduate level. The general aim of the project is to investigate the potentials of this application in terms...... of augmented reality are discussed....

  5. ARLearn: augmented reality meets augmented virtuality

    NARCIS (Netherlands)

    Ternier, Stefaan; Klemke, Roland; Kalz, Marco; Van Ulzen, Patricia; Specht, Marcus

    2012-01-01

    Ternier, S., Klemke, R., Kalz, M., Van Ulzen, P., & Specht, M. (2012). ARLearn: augmented reality meets augmented virtuality [Special issue]. Journal of Universal Computer Science - Technology for learning across physical and virtual spaces, 18(15), 2143-2164.

  6. Relaxed superconductors

    OpenAIRE

    Andrade, Tomás; Gentle, Simon

    2015-01-01

    Momentum relaxation can be built into many holographic models without sacrificing homogeneity of the bulk solution. In this paper we study two such models: one in which translational invariance is broken in the dual theory by spatially-dependent sources for massless scalar fields and another that features an additional neutral scalar field. We turn on a charged scalar field in order to explore the condensation of a charged scalar operator in the dual theories. After demonstrating that the rel...

  7. Augmented Reality in Astrophysics

    OpenAIRE

    Vogt, Frédéric P. A.; Shingles, Luke J.

    2013-01-01

    Augmented Reality consists of merging live images with virtual layers of information. The rapid growth in the popularity of smartphones and tablets over recent years has provided a large base of potential users of Augmented Reality technology, and virtual layers of information can now be attached to a wide variety of physical objects. In this article, we explore the potential of Augmented Reality for astrophysical research with two distinct experiments: (1) Augmented Posters and (2) Augmented...

  8. Relaxed superconductors

    CERN Document Server

    Andrade, Tomas

    2014-01-01

    Momentum relaxation can be built into many holographic models without sacrificing homogeneity of the bulk solution. In this paper we study two such models: one in which translational invariance is broken in the dual theory by spatially-dependent sources for massless scalar fields and another that features an additional neutral scalar field. We turn on a charged scalar field in order to explore the condensation of a charged scalar operator in the dual theories. After demonstrating that the relaxed superconductors we construct are thermodynamically relevant, we find that the finite DC electrical conductivity of the normal phase is replaced by a superfluid pole in the broken phase. Moreover, when the normal phase possesses a Drude behaviour at low frequencies, the optical conductivity of the broken phase at low frequencies can be described by a two-fluid model that is a sum of a Drude peak and a superfluid pole, as was found recently for inhomogeneous holographic superconductors. We also study cases in which thi...

  9. A Survey on Applications of Augmented Reality

    Directory of Open Access Journals (Sweden)

    Andrea Sanna

    2016-01-01

    Full Text Available The term Augmented Reality (AR refers to a set of technologies and devices able to enhance and improve human perception, thus bridging the gap between real and virtual space. Physical and artificial objects are mixed together in a hybrid space where the user can move without constraints. This mediated reality is spread in our everyday life: work, study, training, relaxation, time spent traveling are just some of the moments in which you can use AR applications.This paper aims to provide an overview of current technologies and future trends of augmented reality as well as to describe the main application domains, outlining benefits and open issues.

  10. Augmented Reality in Astrophysics

    CERN Document Server

    Vogt, Frédéric P A

    2013-01-01

    Augmented Reality consists of merging live images with virtual layers of information. The rapid growth in the popularity of smartphones and tablets over recent years has provided a large base of potential users of Augmented Reality technology, and virtual layers of information can now be attached to a wide variety of physical objects. In this article, we explore the potential of Augmented Reality for astrophysical research with two distinct experiments: (1) Augmented Posters and (2) Augmented Articles. We demonstrate that the emerging technology of Augmented Reality can already be used and implemented without expert knowledge using currently available apps. Our experiments highlight the potential of Augmented Reality to improve the communication of scientific results in the field of astrophysics. We also present feedback gathered from the Australian astrophysics community that reveals evidence of some interest in this technology by astronomers who experimented with Augmented Posters. In addition, we discuss p...

  11. Inductively Coupled Augmented Railgun

    CERN Document Server

    Bahder, Thomas B

    2011-01-01

    We derive the non-linear dynamical equations for an augmented electromagnetic railgun, whose augmentation circuit is inductively coupled to the gun circuit. We solve these differential equations numerically using example parameter values. We find a complicated interaction between the augmentation circuit, gun circuit, and mechanical degrees of freedom, leading to a complicated optimization problem. For certain values of parameters, we find that an augmented electromagnetic railgun has an armature kinetic energy that is 42% larger than the same railgun with no augmentation circuit. Optimizing the parameters may lead to further increase in performance.

  12. Confronting an augmented reality

    OpenAIRE

    Munnerley, Danny; Bacon, Matt; Wilson, Anna,; Steele, James; Hedberg, John; Fitzgerald, Robert

    2012-01-01

    How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself ? In this article, we seek to initiate a discussion that focuses on these questions, and suggest that they be used as drivers for research into effective educational applications of augmented reality. We discuss how multi-modal, sensorial...

  13. Adaptive Augmented Reality: Plasticity of Augmentations

    OpenAIRE

    Ghouaiel, Nehla; Cieutat, Jean-Marc; Jessel, Jean-Pierre

    2014-01-01

    International audience An augmented reality system is used to complete the real world with virtual objects (computer generated) so they seem to coexist in the same space as the real world. The concept of plasticity [4][5] was first introduced for Human Computer Interaction (HCI). It denotes the ability of an HCI interface to fit the context of use defined by the user, the environment and the platform. We believe that plasticity is a very important notion in the domain of augmented reality....

  14. Confronting an Augmented Reality

    Science.gov (United States)

    Munnerley, Danny; Bacon, Matt; Wilson, Anna; Steele, James; Hedberg, John; Fitzgerald, Robert

    2012-01-01

    How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself ? In this article, we seek to initiate a discussion that focuses on these questions, and…

  15. Augmented Spinor Space

    Institute of Scientific and Technical Information of China (English)

    Xiuhong FENG; Lin ZHU; Yanlin YU

    2007-01-01

    In this paper, based on the Pauli matrices, a notion of augmented spinor space is introduced, and a uniqueness of such augmented spinor space of rank n is proved. It may be expected that this new notion of spaces can be used in mathematical physics and geometry.

  16. Augmented reality: a review.

    Science.gov (United States)

    Berryman, Donna R

    2012-01-01

    Augmented reality is a technology that overlays digital information on objects or places in the real world for the purpose of enhancing the user experience. It is not virtual reality, that is, the technology that creates a totally digital or computer created environment. Augmented reality, with its ability to combine reality and digital information, is being studied and implemented in medicine, marketing, museums, fashion, and numerous other areas. This article presents an overview of augmented reality, discussing what it is, how it works, its current implementations, and its potential impact on libraries. PMID:22559183

  17. Augmented reality: a review.

    Science.gov (United States)

    Berryman, Donna R

    2012-01-01

    Augmented reality is a technology that overlays digital information on objects or places in the real world for the purpose of enhancing the user experience. It is not virtual reality, that is, the technology that creates a totally digital or computer created environment. Augmented reality, with its ability to combine reality and digital information, is being studied and implemented in medicine, marketing, museums, fashion, and numerous other areas. This article presents an overview of augmented reality, discussing what it is, how it works, its current implementations, and its potential impact on libraries.

  18. Breathing and Relaxation

    Science.gov (United States)

    ... related breathing difficulties. Learn some ways to control breathing and some techniques to help you reach a greater level of relaxation during your day: Diaphragmatic Breathing Minimizing Shortness of Breath Instant Relaxation Drill Meditation ...

  19. Marketing and Augmented Reality

    OpenAIRE

    Zelený, Martin

    2010-01-01

    The main goal of this diploma thesis is to identify the usage of augmented reality in contemporary marketing practice and the expectations of marketers for the future use. This will be achieved by conducting a quantitative and qualitative research among existing creative and advertising companies. Secondary goal is introducing the concept of augmented reality from the theoretical point of view and also description of potential utilization based on known examples. The tools for the practical p...

  20. Interactive augmented reality

    OpenAIRE

    Moret Gabarró, Roger

    2010-01-01

    Projecte final de carrera realitzat en col.laboració amb el Royal Institute of Technology Augmented reality can provide a new experience to users by adding virtual objects where they are relevant in the real world. The new generation of mobile phones offers a platform to develop augmented reality application for industry as well as for the general public. Although some applications are reaching commercial viability, the technology is still limited. The main problem designers have to face w...

  1. Confronting an augmented reality

    Directory of Open Access Journals (Sweden)

    John Hedberg

    2012-08-01

    Full Text Available How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself? In this article, we seek to initiate a discussion that focuses on these questions, and suggest that they be used as drivers for research into effective educational applications of augmented reality. We discuss how multi-modal, sensorial augmentation of reality links to existing theories of education and learning, focusing on ideas of cognitive dissonance and the confrontation of new realities implied by exposure to new and varied perspectives. We also discuss connections with broader debates brought on by the social and cultural changes wrought by the increased digitalisation of our lives, especially the concept of the extended mind. Rather than offer a prescription for augmentation, our intention is to throw open debate and to provoke deep thinking about what interacting with and creating an augmented reality might mean for both teacher and learner.

  2. Augmenting computer networks

    Science.gov (United States)

    Bokhari, S. H.; Raza, A. D.

    1984-01-01

    Three methods of augmenting computer networks by adding at most one link per processor are discussed: (1) A tree of N nodes may be augmented such that the resulting graph has diameter no greater than 4log sub 2((N+2)/3)-2. Thi O(N(3)) algorithm can be applied to any spanning tree of a connected graph to reduce the diameter of that graph to O(log N); (2) Given a binary tree T and a chain C of N nodes each, C may be augmented to produce C so that T is a subgraph of C. This algorithm is O(N) and may be used to produce augmented chains or rings that have diameter no greater than 2log sub 2((N+2)/3) and are planar; (3) Any rectangular two-dimensional 4 (8) nearest neighbor array of size N = 2(k) may be augmented so that it can emulate a single step shuffle-exchange network of size N/2 in 3(t) time steps.

  3. Everything Augmented: On the Real in Augmented Reality

    Directory of Open Access Journals (Sweden)

    Hanna Schraffenberger

    2014-12-01

    Full Text Available What is augmented in Augmented Reality (AR? In this paper, we review existing opinions and show how little consensus exists on this matter. Subsequently, we approach the question from a theoretical and technology-independent perspective. We identify spatial and content-based relationships between the virtual and the real as being decisive for AR and come to the conclusion that virtual content augments that to which it relates. Subsequently, we categorize different forms of AR based on what is augmented. We distinguish between augmented environments, augmented objects, augmented humans and augmented content and consider the possibility of augmented perception. The categories are illustrated with AR (art works and conceptual differences between them are pointed out. Moreover, we discuss what the real contributes to AR and how it can shape (future AR experiences. A summary of our findings and suggestions for future research and practice, such as research into multimodal and crossmodal AR, conclude the paper.

  4. A quantum relaxation-time approximation for finite fermion systems

    CERN Document Server

    Reinhard, P -G

    2014-01-01

    We propose a relaxation time approximation for the description of the dynamics of strongly excited fermion systems. Our approach is based on time-dependent density functional theory at the level of the local density approximation. This mean-field picture is augmented by collisional correlations handled in relaxation time approximation which is inspired from the corresponding semi-classical picture. The method involves the estimate of microscopic relaxation rates/times which is presently taken from the well established semi-classical experience. The relaxation time approximation implies evaluation of the instantaneous equilibrium state towards which the dynamical state is progressively driven at the pace of the microscopic relaxation time. As test case, we consider Na clusters of various sizes excited either by a swift ion projectile or by a short and intense laser pulse, driven in various dynamical regimes ranging from linear to strongly non-linear reactions. We observe a strong effect of dissipation on sensi...

  5. Augmented marked graphs

    CERN Document Server

    Cheung, King Sing

    2014-01-01

    Petri nets are a formal and theoretically rich model for the modelling and analysis of systems. A subclass of Petri nets, augmented marked graphs possess a structure that is especially desirable for the modelling and analysis of systems with concurrent processes and shared resources.This monograph consists of three parts: Part I provides the conceptual background for readers who have no prior knowledge on Petri nets; Part II elaborates the theory of augmented marked graphs; finally, Part III discusses the application to system integration. The book is suitable as a first self-contained volume

  6. Augmented reality som wearable

    DEFF Research Database (Denmark)

    Buhl, Mie; Rahn, Annette

    2015-01-01

    Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR-applikat......Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR...

  7. Prototyping Augmented Reality

    CERN Document Server

    Mullen, Tony

    2011-01-01

    Learn to create augmented reality apps using Processing open-source programming language Augmented reality (AR) is used all over, and you may not even realize it. Smartphones overlay data onto live camera views to show homes for sale, restaurants, or historical sites. American football broadcasts use AR to show the invisible first-down line on the field to TV viewers. Nike and Budweiser, among others, have used AR in ads. Now, you can learn to create AR prototypes using 3D data, Processing open-source programming language, and other languages. This unique book is an easy-to-follow guide on how

  8. Collaborative augmented reality environments

    DEFF Research Database (Denmark)

    Büscher, Monika; Christensen, Michael; Grønbæk, Kaj;

    2000-01-01

    This paper describes Manufaktur, a prototype of a concept and infrastructure that goes beyond the classical CVE systems toward a collaborative augmented reality environment, where users? documents and objects appear as live representations in a 3D workspace. Manufaktur supports collaborative...

  9. Augmented Reality og kulturarv

    DEFF Research Database (Denmark)

    Nielsen, Mikkel Kirkedahl Lysholm

    2013-01-01

    Museerne står overfor at skulle omfavne den digitale kultur i håndteringen af den store mængde viden, institutionerne repræsenterer. Augmented Reality-systemer forbinder ved hjælp af moderne teknologi det virtuelle med det virkelige, og kan derfor synes som en oplagt anvendelsesmulighed i...

  10. Augmented reality som wearable

    DEFF Research Database (Denmark)

    Buhl, Mie; Rahn, Annette

    2015-01-01

    Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR...

  11. Collaboration in Augmented Reality

    NARCIS (Netherlands)

    Lukosch, S.; Billinghurst, M.; Alem, L.; Kiyokawa, K.

    2015-01-01

    Augmented Reality (AR) is a technology that allows users to view and interact in real time with virtual images seamlessly superimposed over the real world. AR systems can be used to create unique collaborative experiences. For example, co-located users can see shared 3D virtual objects that they int

  12. AR DOC: Augmented reality documentaries

    DEFF Research Database (Denmark)

    Vistisen, Peter

    2014-01-01

    Augmented Reality Documentaries (AR DOC) er et ’lille’ Shareplay projekt (ansøgte midler augmented reality cross media løsninger, til at skabe engagerende publikumsformidling...... indenfor oplevelsesindustrien. Projektet har genereret ny viden omkring, hvordan fysisk og digital formidling kan understøttes via Augmented Reality som formidlingsformat....

  13. Simple Implant Augmentation Rhinoplasty.

    Science.gov (United States)

    Nguyen, Anh H; Bartlett, Erica L; Kania, Katarzyna; Bae, Sang Mo

    2015-11-01

    Augmentation rhinoplasty among Asian patients is often performed to improve the height of the nasal dorsum. As the use of autogenous tissues poses certain limitations, alloplastic materials are a viable alternative with a long history of use in Asia. The superiority of one implant prosthesis over another for augmentation rhinoplasty is a matter of debate, with each material representing varying strengths and weaknesses, indications for use, and precautions to consider in nasal implant placement. An implant prosthesis should be used on a case-by-case basis. Augmentation rhinoplasty requires the consideration of specific anatomical preoperative factors, including the external nose, nasal length, nasofrontal angle, humps, and facial proportions. It is equally important to consider several operative guidelines to appropriately shape implants to minimize the occurrence of adverse effects and postoperative complications. The most common postoperative complications include infection, nasal height change, movement of implant prosthesis, and silicone implant protrusion. In addition, the surgeon should consider the current standards of Asian beauty aesthetics to better understand the patient's desired outcome. PMID:26648804

  14. A unified approach to an augmented Burgers equation for the propagation of sonic booms.

    Science.gov (United States)

    Yamamoto, Masafumi; Hashimoto, Atsushi; Aoyama, Takashi; Sakai, Takeharu

    2015-04-01

    Nonlinear propagation through a relaxing atmosphere of pressure disturbances extracted from a computational fluid dynamics (CFD) solution of the flow around a supersonic aircraft is simulated using an augmented Burgers equation. The effects of nonlinearity, geometrical spreading, atmospheric inhomogeneity, thermoviscous attenuation, and molecular vibration relaxation are taken into account. The augmented Burgers equation used for sonic boom propagation calculations is often solved by the operator splitting method, but numerical difficulties arise with this approach when dissipation is not effective. By re-examining the solution algorithms for the augmented Burgers equation, a stable method for handling the relaxation effect has been developed. This approach can handle the Burgers equation in a unified manner without operator splitting and, therefore, the resulting scheme is twice as fast as the original one. The approach is validated by comparing it with an analytical solution and a detailed CFD of dispersed plane wave propagation. In addition, a rise time prediction of low-boom supersonic aircraft is demonstrated.

  15. Relaxation Techniques for Health

    Science.gov (United States)

    ... hasn't been shown to relieve labor pain. Depression An evaluation of 15 studies concluded that relaxation ... links Twitter Read our disclaimer about external links Facebook Read our disclaimer about external links YouTube Read ...

  16. Perturbations and quantum relaxation

    CERN Document Server

    Kandhadai, Adithya

    2016-01-01

    We investigate whether small perturbations can cause relaxation to quantum equilibrium over very long timescales. We consider in particular a two-dimensional harmonic oscillator, which can serve as a model of a field mode on expanding space. We assume an initial wave function with small perturbations to the ground state. We present evidence that the trajectories are highly confined so as to preclude relaxation to equilibrium even over very long timescales. Cosmological implications are briefly discussed.

  17. Augmenting Clozapine With Sertindole

    DEFF Research Database (Denmark)

    Nielsen, Jimmi; Emborg, Charlotte; Gydesen, Susanne;

    2012-01-01

    randomized 1:1 to either sertindole 16 mg or placebo, and assessment was done at baseline and after 6 and 12 weeks. Assessment included the Positive and Negative Syndrome Scale, Clinical Global Impression, Udvalg for Kliniske Undersøgelser, World Health Organization Quality of Life Brief, Drug Attitude...... Inventory, fasting glucose, lipids, and electrocardiogram. Clozapine augmentation with sertindole was not superior to placebo regarding total score or subscale score of the Positive and Negative Syndrome Scale, Clinical Global Impression, World Health Organization Quality of Life Brief, or Drug Attitude...

  18. Neurally augmented sexual function.

    Science.gov (United States)

    Meloy, S

    2007-01-01

    Neurally Augmented Sexual Function (NASF) is a technique utilizing epidural electrodes to restore and improve sexual function. Orgasmic dysfunction is common in adult women, affecting roughly one quarter of populations studied. Many male patients suffering from erectile dysfunction are not candidates for phosphdiesterase therapy due to concomitant nitrate therapy. Positioning the electrodes at roughly the level of the cauda equina allows for stimulation of somatic efferents and afferents as well as modifying sympathetic and parasympathetic activity. Our series of women treated by NASF is described. Our experience shows that the evaluation of potential candidates for both correctable causes and psychological screening are important considerations. PMID:17691397

  19. AUGMENTATION-RELATED BRAIN PLASTICITY

    OpenAIRE

    Giovanni eDi Pino; Angelo eMaravita; Loredana eZollo; Eugenio eGuglielmelli; Vincenzo eDi Lazzaro

    2014-01-01

    Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyzes the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain.Hitherto, few studies investigated the neural correlates of augmentati...

  20. Augmentation-related brain plasticity

    OpenAIRE

    Di Pino, Giovanni; Maravita, Angelo; Zollo, Loredana; Guglielmelli, Eugenio; Di Lazzaro, Vincenzo

    2014-01-01

    Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyses the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain. Hitherto, few studies investigated the neural correlates of augmentat...

  1. Augmented Reality for Science Education

    DEFF Research Database (Denmark)

    Brandt, Harald; Nielsen, Birgitte Lund; Georgsen, Marianne;

    Augmented reality (AR) holds great promise as a learning tool. So far, however, most research has looked at the technology itself – and AR has been used primarily for commercial purposes. As a learning tool, AR supports an inquiry-based approach to science education with a high level of student...... involvement. The AR-sci-project (Augmented Reality for SCIence education) addresses the issue of applying augmented reality in developing innovative science education and enhancing the quality of science teaching and learning....

  2. Augmented Sustainability Measures for Scotland

    OpenAIRE

    John C. V. Pezzey; Nick Hanley; Karen Turner; Dugald Tinch

    2003-01-01

    We estimate and compare two empirical measures of the weak sustainability of an economy for the first time: the change in augmented green net national product (GNNP), and the interest on augmented genuine savings (GS). Yearly calculations are given for each measure for Scotland during 1992-99. Augmentation means including, using projections to 2020, production possibilities enabled by exogenous technical progress or changing terms of trade. In passing, we clarify the treatment of environmenta...

  3. Crime Scenes as Augmented Reality

    DEFF Research Database (Denmark)

    Sandvik, Kjetil

    2010-01-01

    Using the concept of augmented reality, this article will investigate how places in various ways have become augmented by means of different mediatization strategies. Augmentation of reality implies an enhancement of the places' emotional character: a certain mood, atmosphere or narrative surplus......, physical damage: they are all readable and interpretable signs. As augmented reality the crime scene carries a narrative which at first is hidden and must be revealed. Due to the process of investigation and the detective's ability to reason and deduce, the crime scene as place is reconstructed as virtual...

  4. Augmented reality system

    Science.gov (United States)

    Lin, Chien-Liang; Su, Yu-Zheng; Hung, Min-Wei; Huang, Kuo-Cheng

    2010-08-01

    In recent years, Augmented Reality (AR)[1][2][3] is very popular in universities and research organizations. The AR technology has been widely used in Virtual Reality (VR) fields, such as sophisticated weapons, flight vehicle development, data model visualization, virtual training, entertainment and arts. AR has characteristics to enhance the display output as a real environment with specific user interactive functions or specific object recognitions. It can be use in medical treatment, anatomy training, precision instrument casting, warplane guidance, engineering and distance robot control. AR has a lot of vantages than VR. This system developed combines sensors, software and imaging algorithms to make users feel real, actual and existing. Imaging algorithms include gray level method, image binarization method, and white balance method in order to make accurate image recognition and overcome the effects of light.

  5. Augmented Virtual Reality Laboratory

    Science.gov (United States)

    Tully-Hanson, Benjamin

    2015-01-01

    Real time motion tracking hardware has for the most part been cost prohibitive for research to regularly take place until recently. With the release of the Microsoft Kinect in November 2010, researchers now have access to a device that for a few hundred dollars is capable of providing redgreenblue (RGB), depth, and skeleton data. It is also capable of tracking multiple people in real time. For its original intended purposes, i.e. gaming, being used with the Xbox 360 and eventually Xbox One, it performs quite well. However, researchers soon found that although the sensor is versatile, it has limitations in real world applications. I was brought aboard this summer by William Little in the Augmented Virtual Reality (AVR) Lab at Kennedy Space Center to find solutions to these limitations.

  6. NAESA Augmentation Pilot Project

    Science.gov (United States)

    Hoover, John J.

    1998-01-01

    This project was one project within the Native American Earth and Space Academy (NAESA). NAESA is a national initiative comprised of several organizations that support programs which focus on 1) enhancing the technological, scientific and pedagogical skills of K-14 teachers who instruct Native Americans, 2) enhancing the understanding and applications of science, technology, and engineering of college-bound Native Americans and teaching them general college "survival skills" (e.g., test taking, time management, study habits), 3) enhancing the scientific and pedagogical skills of the faculty of tribally-controllcd colleges and community colleges with large Native American enrollments, and 4) strengthening the critical relationships between students, their parents, tribal elders, and their communities. This Augmentation Pilot Project focused on the areas of community-school alliances and intemet technology use in teaching and learning and daily living addressing five major objectives.

  7. NASA Communications Augmentation network

    Science.gov (United States)

    Omidyar, Guy C.; Butler, Thomas E.; Laios, Straton C.

    1990-09-01

    The NASA Communications (Nascom) Division of the Mission Operations and Data Systems Directorate (MO&DSD) is to undertake a major initiative to develop the Nascom Augmentation (NAUG) network to achieve its long-range service objectives for operational data transport to support the Space Station Freedom Program, the Earth Observing System (EOS), and other projects. The NAUG is the Nascom ground communications network being developed to accommodate the operational traffic of the mid-1990s and beyond. The NAUG network development will be based on the Open Systems Interconnection Reference Model (OSI-RM). This paper describes the NAUG network architecture, subsystems, topology, and services; addresses issues of internetworking the Nascom network with other elements of the Space Station Information System (SSIS); discusses the operations environment. This paper also notes the areas of related research and presents the current conception of how the network will provide broadband services in 1998.

  8. Magnetohydrodynamic Augmented Propulsion Experiment

    Science.gov (United States)

    Litchford, Ron J.

    2008-01-01

    Over the past several years, efforts have been under way to design and develop an operationally flexible research facility for investigating the use of cross-field MHD accelerators as a potential thrust augmentation device for thermal propulsion systems. The baseline configuration for this high-power experimental facility utilizes a 1.5-MWe multi-gas arc-heater as a thermal driver for a 2-MWe MHD accelerator, which resides in a large-bore 2-tesla electromagnet. A preliminary design study using NaK seeded nitrogen as the working fluid led to an externally diagonalized segmented MHD channel configuration based on an expendable heat-sink design concept. The current status report includes a review of engineering/design work and performance optimization analyses and summarizes component hardware fabrication and development efforts, preliminary testing results, and recent progress toward full-up assembly and testing

  9. Hydrogen relaxation in lutetium

    OpenAIRE

    Vajda, P.; Daou, J.N.; Moser, P.

    1983-01-01

    The internal friction and the dynamic modulus have been measured between 4.2 and 470 K in the system α-LuH(D)x, with x = 0 to 0.2. In well annealed specimens, an (H)-peak is observed at 215-225 K, which has a linearly x-dependent amplitude and exhibits an isotope effect on its activation energy and relaxation time. It is attributed to a Snoek-like relaxation of H-H pairs reorienting in the Lu-lattice. The isotope effect is interpreted in a model of tunnelling from different excited levels for...

  10. Molecular Relaxation in Liquids

    CERN Document Server

    Bagchi, Biman

    2012-01-01

    This book brings together many different relaxation phenomena in liquids under a common umbrella and provides a unified view of apparently diverse phenomena. It aligns recent experimental results obtained with modern techniques with recent theoretical developments. Such close interaction between experiment and theory in this area goes back to the works of Einstein, Smoluchowski, Kramers' and de Gennes. Development of ultrafast laser spectroscopy recently allowed study of various relaxation processes directly in the time domain, with time scales going down to picosecond (ps) and femtosecond (fs

  11. Augmented Reality Comes to Physics

    Science.gov (United States)

    Buesing, Mark; Cook, Michael

    2013-01-01

    Augmented reality (AR) is a technology used on computing devices where processor-generated graphics are rendered over real objects to enhance the sensory experience in real time. In other words, what you are really seeing is augmented by the computer. Many AR games already exist for systems such as Kinect and Nintendo 3DS and mobile apps, such as…

  12. Relaxation techniques for stress

    Science.gov (United States)

    Chronic stress can be bad for your body and mind. In can put you at risk for health problems such as high blood pressure, stomachaches, headaches, anxiety, and depression. Using relaxation techniques can help you feel calm. These exercises can also help you ...

  13. Adapting Information Through Tangible Augmented Reality Interfaces

    OpenAIRE

    Sinclair, Patrick; Martinez, Kirk

    2004-01-01

    Tangible augmented reality interfaces offer a hands on approach for examining objects and exploring the associated information. We describe two tangible augmented reality interfaces that can expose the adaptation of information presented to users about objects in augmented reality environments.

  14. Control Augmented Structural Synthesis

    Science.gov (United States)

    Lust, Robert V.; Schmit, Lucien A.

    1988-01-01

    A methodology for control augmented structural synthesis is proposed for a class of structures which can be modeled as an assemblage of frame and/or truss elements. It is assumed that both the plant (structure) and the active control system dynamics can be adequately represented with a linear model. The structural sizing variables, active control system feedback gains and nonstructural lumped masses are treated simultaneously as independent design variables. Design constraints are imposed on static and dynamic displacements, static stresses, actuator forces and natural frequencies to ensure acceptable system behavior. Multiple static and dynamic loading conditions are considered. Side constraints imposed on the design variables protect against the generation of unrealizable designs. While the proposed approach is fundamentally more general, here the methodology is developed and demonstrated for the case where: (1) the dynamic loading is harmonic and thus the steady state response is of primary interest; (2) direct output feedback is used for the control system model; and (3) the actuators and sensors are collocated.

  15. Augmented Likelihood Image Reconstruction.

    Science.gov (United States)

    Stille, Maik; Kleine, Matthias; Hägele, Julian; Barkhausen, Jörg; Buzug, Thorsten M

    2016-01-01

    The presence of high-density objects remains an open problem in medical CT imaging. Data of projections passing through objects of high density, such as metal implants, are dominated by noise and are highly affected by beam hardening and scatter. Reconstructed images become less diagnostically conclusive because of pronounced artifacts that manifest as dark and bright streaks. A new reconstruction algorithm is proposed with the aim to reduce these artifacts by incorporating information about shape and known attenuation coefficients of a metal implant. Image reconstruction is considered as a variational optimization problem. The afore-mentioned prior knowledge is introduced in terms of equality constraints. An augmented Lagrangian approach is adapted in order to minimize the associated log-likelihood function for transmission CT. During iterations, temporally appearing artifacts are reduced with a bilateral filter and new projection values are calculated, which are used later on for the reconstruction. A detailed evaluation in cooperation with radiologists is performed on software and hardware phantoms, as well as on clinically relevant patient data of subjects with various metal implants. Results show that the proposed reconstruction algorithm is able to outperform contemporary metal artifact reduction methods such as normalized metal artifact reduction.

  16. Zion Augmented Reality Application (ZARA): An Augmented Heritage Prototype

    OpenAIRE

    Odland, Johannes Johannesen

    2007-01-01

    This paper describes the investigation and development of a virtual heritage application that employs augmented reality to disseminate a model of the Zion castle. The developed system is a flexible prototype that leverages several open source frameworks and applications.

  17. Hair Dye and Hair Relaxers

    Science.gov (United States)

    ... Consumers Consumer Information by Audience For Women Hair Dye and Hair Relaxers Share Tweet Linkedin Pin it More sharing ... products. If you have a bad reaction to hair dyes and relaxers, you should: Stop using the product. ...

  18. Augmented Reality Comes to Physics

    Science.gov (United States)

    Buesing, Mark; Cook, Michael

    2013-04-01

    Augmented reality (AR) is a technology used on computing devices where processor-generated graphics are rendered over real objects to enhance the sensory experience in real time. In other words, what you are really seeing is augmented by the computer. Many AR games already exist for systems such as Kinect and Nintendo 3DS and mobile apps, such as Tagwhat and Star Chart (a must for astronomy class). The yellow line marking first downs in a televised football game2 and the enhanced puck that makes televised hockey easier to follow3 both use augmented reality to do the job.

  19. Augmented Reality for Science Education

    DEFF Research Database (Denmark)

    Brandt, Harald; Nielsen, Birgitte Lund; Georgsen, Marianne;

    2015-01-01

    Augmented reality (AR) holds great promise as a learning tool. So far, however, most research has looked at the technology itself – and AR has been used primarily for commercial purposes. As a learning tool, AR supports an inquiry-based approach to science education with a high level of student i...... involvement. The AR-sci-project (Augmented Reality for SCIence education) addresses the issue of applying augmented reality in developing innovative science education and enhancing the quality of science teaching and learning....

  20. Understanding augmented reality concepts and applications

    CERN Document Server

    Craig, Alan B

    2013-01-01

    Augmented reality is not a technology. Augmented reality is a medium. Likewise, a book on augmented reality that only addresses the technology that is required to support the medium of augmented reality falls far short of providing the background that is needed to produce, or critically consume augmented reality applications. One reads a book. One watches a movie. One experiences augmented reality. Understanding Augmented Reality addresses the elements that are required to create compelling augmented reality experiences. The technology that supports

  1. Kinetic Actviation Relaxation Technique

    CERN Document Server

    Béland, Laurent Karim; El-Mellouhi, Fedwa; Joly, Jean-François; Mousseau, Normand

    2011-01-01

    We present a detailed description of the kinetic Activation-Relaxation Technique (k-ART), an off-lattice, self-learning kinetic Monte Carlo algorithm with on-the-fly event search. Combining a topological classification for local environments and event generation with ART nouveau, an efficient unbiased sampling method for finding transition states, k-ART can be applied to complex materials with atoms in off-lattice positions or with elastic deformations that cannot be handled with standard KMC approaches. In addition to presenting the various elements of the algorithm, we demonstrate the general character of k-ART by applying the algorithm to three challenging systems: self-defect annihilation in c-Si, self-interstitial diffusion in Fe and structural relaxation in amorphous silicon.

  2. Experiments in paramagnetic relaxation

    International Nuclear Information System (INIS)

    This thesis presents two attempts to improve the resolving power of the relaxation measurement technique. The first attempt reconsiders the old technique of steady state saturation. When used in conjunction with the pulse technique, it offers the possibility of obtaining additional information about the system in which all-time derivatives are zero; in addition, non-linear effects may be distinguished from each other. The second attempt involved a systematic study of only one system: Cu in the Tutton salts (K and Rb). The systematic approach, the high accuracy of the measurement and the sheer amount of experimental data for varying temperature, magnetic field and concentration made it possible in this case to separate the prevailing relaxation mechanisms reliably

  3. A Comparison of Relaxation Strategies.

    Science.gov (United States)

    Matthews, Doris B.

    Some researchers argue that all relaxation techniques produce a single relaxation response while others support a specific-effects hypothesis which suggests that progressive relaxation affects the musculoskeletal system and that guided imagery affects cognitive changes. Autogenics is considered a technique which is both somatic and cognitive. This…

  4. Relaxation phenomena in disordered systems

    Science.gov (United States)

    Sciortino, F.; Tartaglia, P.

    1997-02-01

    In this article we discuss how the assumptions of self-similarity imposed on the distribution of independently relaxing modes, as well as on their amplitude and characteristic times, manifest in the global relaxation phenomena. We also review recent applications of such approach to the description of relaxation phenomena in microemulsions and molecular glasses.

  5. Nonlinear fractional relaxation

    Indian Academy of Sciences (India)

    A Tofighi

    2012-04-01

    We define a nonlinear model for fractional relaxation phenomena. We use -expansion method to analyse this model. By studying the fundamental solutions of this model we find that when → 0 the model exhibits a fast decay rate and when → ∞ the model exhibits a power-law decay. By analysing the frequency response we find a logarithmic enhancement for the relative ratio of susceptibility.

  6. Relaxation from particle production

    CERN Document Server

    Hook, Anson

    2016-01-01

    We consider using particle production as a friction force by which to implement a "Relaxion" solution to the electroweak hierarchy problem. Using this approach, we are able to avoid superplanckian field excursions and avoid any conflict with the strong CP problem. The relaxation mechanism can work before, during or after inflation allowing for inflationary dynamics to play an important role or to be completely decoupled.

  7. Augmenter of liver regeneration

    Directory of Open Access Journals (Sweden)

    Gandhi Chandrashekhar R

    2012-07-01

    Full Text Available Abstract ‘Augmenter of liver regeneration’ (ALR (also known as hepatic stimulatory substance or hepatopoietin was originally found to promote growth of hepatocytes in the regenerating or injured liver. ALR is expressed ubiquitously in all organs, and exclusively in hepatocytes in the liver. ALR, a survival factor for hepatocytes, exhibits significant homology with ERV1 (essential for respiration and viability protein that is essential for the survival of the yeast, Saccharomyces cerevisiae. ALR comprises 198 to 205 amino acids (approximately 22 kDa, but is post-translationally modified to three high molecular weight species (approximately 38 to 42 kDa found in hepatocytes. ALR is present in mitochondria, cytosol, endoplasmic reticulum, and nucleus. Mitochondrial ALR may be involved in oxidative phosphorylation, but also functions as sulfhydryl oxidase and cytochrome c reductase, and causes Fe/S maturation of proteins. ALR, secreted by hepatocytes, stimulates synthesis of TNF-α, IL-6, and nitric oxide in Kupffer cells via a G-protein coupled receptor. While the 22 kDa rat recombinant ALR does not stimulate DNA synthesis in hepatocytes, the short form (15 kDa of human recombinant ALR was reported to be equipotent as or even stronger than TGF-α or HGF as a mitogen for hepatocytes. Altered serum ALR levels in certain pathological conditions suggest that it may be a diagnostic marker for liver injury/disease. Although ALR appears to have multiple functions, the knowledge of its role in various organs, including the liver, is extremely inadequate, and it is not known whether different ALR species have distinct functions. Future research should provide better understanding of the expression and functions of this enigmatic molecule.

  8. Scale and Rotation Invariant Matching Using Linearly Augmented Trees.

    Science.gov (United States)

    Jiang, Hao; Tian, Tai-Peng; Sclaroff, Stan

    2015-12-01

    We propose a novel linearly augmented tree method for efficient scale and rotation invariant object matching. The proposed method enforces pairwise matching consistency defined on trees, and high-order constraints on all the sites of a template. The pairwise constraints admit arbitrary metrics while the high-order constraints use L1 norms and therefore can be linearized. Such a linearly augmented tree formulation introduces hyperedges and loops into the basic tree structure. But, different from a general loopy graph, its special structure allows us to relax and decompose the optimization into a sequence of tree matching problems that are efficiently solvable by dynamic programming. The proposed method also works on continuous scale and rotation parameters; we can match with a scale up to any large value with the same efficiency. Our experiments on ground truth data and a variety of real images and videos show that the proposed method is efficient, accurate and reliable. PMID:26539858

  9. Mersiline mesh in premaxillary augmentation.

    Science.gov (United States)

    Foda, Hossam M T

    2005-01-01

    Premaxillary retrusion may distort the aesthetic appearance of the columella, lip, and nasal tip. This defect is characteristically seen in, but not limited to, patients with cleft lip nasal deformity. This study investigated 60 patients presenting with premaxillary deficiencies in which Mersiline mesh was used to augment the premaxilla. All the cases had surgery using the external rhinoplasty technique. Two methods of augmentation with Mersiline mesh were used: the Mersiline roll technique, for the cases with central symmetric deficiencies, and the Mersiline packing technique, for the cases with asymmetric deficiencies. Premaxillary augmentation with Mersiline mesh proved to be simple technically, easy to perform, and not associated with any complications. Periodic follow-up evaluation for a mean period of 32 months (range, 12-98 months) showed that an adequate degree of premaxillary augmentation was maintained with no clinically detectable resorption of the mesh implant. PMID:15959688

  10. Pure Laparoscopic Augmentation Ileocystoplasty

    Directory of Open Access Journals (Sweden)

    Rafael B. Rebouças

    2014-12-01

    Full Text Available Introduction Guillain-Barre syndrome is an acute neuropathy that rarely compromises bladder function. Conservative management including clean intermittent catheterization and pharmacotherapy is the primary approach for hypocompliant contracted bladder. Surgical treatment may be used in refractory cases to improve bladder compliance and capacity in order to protect the upper urinary tract. We describe a case of pure laparoscopic augmentation ileocystoplasty in a patient affected by Guillain-Barre syndrome. Presentation A 15-year-old female, complaining of voiding dysfunction, recurrent urinary tract infection and worsening renal function for three months. A previous history of Guillain-Barre syndrome on childhood was related. A voiding cystourethrography showed a pine-cone bladder with moderate post-void residual urine. The urodynamic demonstrated a hypocompliant bladder and small bladder capacity (190mL with high detrusor pressure (54 cmH2O. Nonsurgical treatments were attempted, however unsuccessfully. The patient was placed in the exaggerated Trendelenburg position. A four-port transperitoneal technique was used. A segment of ileum approximately 15-20cm was selected and divided with its pedicle. The ileal anastomosis and creation of ileal U-shaped plate were performed laparoscopically, without staplers. Bladder mobilization and longidutinal cystotomy were performed. Enterovesical anastomosis was done with continuous running suture. A suprapubic cystostomy was placed through a 5mm trocar. Results The total operative time was 335 min. The blood loss was minimal. The patient developed ileus in the early days, diet acceptance after the fourth day and was discharged on the seventh postoperative day. The urethral catheter was removed after 2 weeks. At 6-month follow-up, a cystogram showed a significant improvement in bladder capacity. The patient adhered well to clean intermittent self-catheterization and there was no report for febrile infections

  11. Augmented Reality Tower Technology Assessment

    Science.gov (United States)

    Reisman, Ronald J.; Brown, David M.

    2009-01-01

    Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

  12. Augmentation-related brain plasticity

    Science.gov (United States)

    Di Pino, Giovanni; Maravita, Angelo; Zollo, Loredana; Guglielmelli, Eugenio; Di Lazzaro, Vincenzo

    2014-01-01

    Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyses the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain. Hitherto, few studies investigated the neural correlates of augmentation, but clues on it can be borrowed from logically-related paradigms: sensorimotor training, cognitive enhancement, cross-modal plasticity, sensorimotor functional substitution, use and embodiment of tools. Augmentation modifies function and structure of a number of areas, i.e., primary sensory cortices shape their receptive fields to become sensitive to novel inputs. Motor areas adapt the neuroprosthesis representation firing-rate to refine kinematics. As for normal motor outputs, the learning process recruits motor and premotor cortices and the acquisition of proficiency decreases attentional recruitment, focuses the activity on sensorimotor areas and increases the basal ganglia drive on the cortex. Augmentation deeply relies on the frontoparietal network. In particular, premotor cortex is involved in learning the control of an external effector and owns the tool motor representation, while the intraparietal sulcus extracts its visual features. In these areas, multisensory integration neurons enlarge their receptive fields to embody supernumerary limbs. For operating an anthropomorphic neuroprosthesis, the mirror system is required to understand the meaning of the action, the cerebellum for the formation of its internal model and the insula for its interoception. In conclusion, anthropomorphic sensorized devices can provide the critical sensory afferences to evolve the exploitation of tools through their embodiment, reshaping the body representation and the sense of the self

  13. AUGMENTATION-RELATED BRAIN PLASTICITY

    Directory of Open Access Journals (Sweden)

    Giovanni eDi Pino

    2014-06-01

    Full Text Available Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyzes the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain.Hitherto, few studies investigated the neural correlates of augmentation, but clues on it can be borrowed from logically-related paradigms: sensorimotor training, cognitive enhancement, cross-modal plasticity, sensorimotor functional substitution, use and embodiment of tools.Augmentation modifies function and structure of a number of areas, i.e. primary sensory cortices shape their receptive fields to become sensitive to novel inputs. Motor areas adapt the neuroprosthesis representation firing-rate to refine kinematics. As for normal motor outputs, the learning process recruits motor and premotor cortices and the acquisition of proficiency decreases attentional recruitment, focuses the activity on sensorimotor areas and increases the basal ganglia drive on the cortex. Augmentation deeply relies on the frontoparietal network. In particular, premotor cortex is involved in learning the control of an external effector and owns the tool motor representation, while the intraparietal sulcus extracts its visual features. In these areas, multisensory integration neurons enlarge their receptive fields to embody supernumerary limbs. For operating an anthropomorphic neuroprosthesis, the mirror system is required to understand the meaning of the action, the cerebellum for the formation of its internal model and the insula for its interoception. In conclusion, anthropomorphic sensorized devices can provide the critical sensory afferences to evolve the exploitation of tools through their embodiment, reshaping the body representation and the

  14. Augmented Reality in Science Education

    DEFF Research Database (Denmark)

    Nielsen, Birgitte Lund; Brandt, Harald; Swensen, Hakon

    2015-01-01

    Augmented reality (AR) holds great promise as a learning tool. However, most extant studies in this field have focused on the technology itself. The poster presents findings from the first stage of the AR-sci project addressing the issue of applying AR for educational purposes. Benefits and chall......Augmented reality (AR) holds great promise as a learning tool. However, most extant studies in this field have focused on the technology itself. The poster presents findings from the first stage of the AR-sci project addressing the issue of applying AR for educational purposes. Benefits...

  15. [Death in a relaxation tank].

    Science.gov (United States)

    Rupp, Wolf; Simon, Karl-Heinz; Bohnert, Michael

    2009-01-01

    Complete relaxation can be achieved by floating in a darkened, sound-proof relaxation tank filled with salinated water kept at body temperature. Under these conditions, meditation exercises up to self-hypnosis may lead to deep relaxation with physical and mental revitalization. A user manipulated his tank, presumably to completely cut off all optical and acoustic stimuli and accidentally also covered the ventilation hole. The man was found dead in his relaxation tank. The findings suggested lack of oxygen as the cause of death.

  16. Magnetic relaxation in anisotropic magnets

    DEFF Research Database (Denmark)

    Lindgård, Per-Anker

    1971-01-01

    The line shape and the kinematic and thermodynamic slowing down of the critical and paramagnetic relaxation in axially anisotropic materials are discussed. Kinematic slowing down occurs only in the longitudinal relaxation function. The thermodynamic slowing down occurs in either the transverse or...

  17. Augmented assessment as a means to augmented reality.

    Science.gov (United States)

    Bergeron, Bryan

    2006-01-01

    Rigorous scientific assessment of educational technologies typically lags behind the availability of the technologies by years because of the lack of validated instruments and benchmarks. Even when the appropriate assessment instruments are available, they may not be applied because of time and monetary constraints. Work in augmented reality, instrumented mannequins, serious gaming, and similar promising educational technologies that haven't undergone timely, rigorous evaluation, highlights the need for assessment methodologies that address the limitations of traditional approaches. The most promising augmented assessment solutions incorporate elements of rapid prototyping used in the software industry, simulation-based assessment techniques modeled after methods used in bioinformatics, and object-oriented analysis methods borrowed from object oriented programming. PMID:16404012

  18. Augmented reality and its practical application

    OpenAIRE

    ZÍTKOVÁ, Helena

    2011-01-01

    This thesis combines topic of augmented reality with tourism. For analyzing the state of the use of augmented reality was composed case studies. It was created product, which is called Guide to mobile phone.

  19. Augmented Reality for Multi-disciplinary Collaboration

    OpenAIRE

    Wang, Xiangyu; Rui

    2010-01-01

    This chapter presents a framework for multi-disciplinary collaboration. Tangible Augmented Reality has been raised as one of suitable systems for design collaboration. Furthermore, it emphasizes the advantages of Tangible Augmented Reality to illustrate the needs for integrating the Tangible User Interfaces and Augmented Reality Systems.

  20. Effective Augmentation of Complex Networks

    Science.gov (United States)

    Wang, Jinjian; Yu, Xinghuo; Stone, Lewi

    2016-05-01

    Networks science plays an enormous role in many aspects of modern society from distributing electrical power across nations to spreading information and social networking amongst global populations. While modern networks constantly change in size, few studies have sought methods for the difficult task of optimising this growth. Here we study theoretical requirements for augmenting networks by adding source or sink nodes, without requiring additional driver-nodes to accommodate the change i.e., conserving structural controllability. Our “effective augmentation” algorithm takes advantage of clusters intrinsic to the network topology, and permits rapidly and efficient augmentation of a large number of nodes in one time-step. “Effective augmentation” is shown to work successfully on a wide range of model and real networks. The method has numerous applications (e.g. study of biological, social, power and technological networks) and potentially of significant practical and economic value.

  1. Psychotherapy Augmentation through Preconscious Priming

    OpenAIRE

    Borgeat, François; O’Connor, Kieron; Amado, Danielle; St-Pierre-Delorme, Marie-Ève

    2013-01-01

    Objective: To test the hypothesis that repeated preconscious (masked) priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy. Methods: Twenty social phobic patients (13 women) completed a 36-weeks study beginning by 12 weeks of group behavioral therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming conditi...

  2. Psychotherapy augmentation through preconscious priming

    OpenAIRE

    Francois eBorgeat; Kieron eO'Connor; Danielle eAmado; Marie-Eve eSt-Pierre-Delorme

    2013-01-01

    Objective: To test the hypothesis that repeated preconscious (masked) priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy.Methods: Twenty social phobic patients (13 women) completed a 36 weeks study beginning by 12 weeks of group behavioural therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming condition ...

  3. Media-Augmented Exercise Machines

    Science.gov (United States)

    Krueger, T.

    2002-01-01

    Cardio-vascular exercise has been used to mitigate the muscle and cardiac atrophy associated with adaptation to micro-gravity environments. Several hours per day may be required. In confined spaces and long duration missions this kind of exercise is inevitably repetitive and rapidly becomes uninteresting. At the same time, there are pressures to accomplish as much as possible given the cost- per-hour for humans occupying orbiting or interplanetary. Media augmentation provides a the means to overlap activities in time by supplementing the exercise with social, recreational, training or collaborative activities and thereby reducing time pressures. In addition, the machine functions as an interface to a wide range of digital environments allowing for spatial variety in an otherwise confined environment. We hypothesize that the adoption of media augmented exercise machines will have a positive effect on psycho-social well-being on long duration missions. By organizing and supplementing exercise machines, data acquisition hardware, computers and displays into an interacting system this proposal increases functionality with limited additional mass. This paper reviews preliminary work on a project to augment exercise equipment in a manner that addresses these issues and at the same time opens possibilities for additional benefits. A testbed augmented exercise machine uses a specialty built cycle trainer as both input to a virtual environment and as an output device from it using spatialized sound, and visual displays, vibration transducers and variable resistance. The resulting interactivity increases a sense of engagement in the exercise, provides a rich experience of the digital environments. Activities in the virtual environment and accompanying physiological and psychological indicators may be correlated to track and evaluate the health of the crew.

  4. Can Black Hole Relax Unitarily?

    CERN Document Server

    Solodukhin, S N

    2004-01-01

    We review the way the BTZ black hole relaxes back to thermal equilibrium after a small perturbation and how it is seen in the boundary (finite volume) CFT. The unitarity requires the relaxation to be quasi-periodic. It is preserved in the CFT but is not obvious in the case of the semiclassical black hole the relaxation of which is driven by complex quasi-normal modes. We discuss two ways of modifying the semiclassical black hole geometry to maintain unitarity: the (fractal) brick wall and the worm-hole modification. In the latter case the entropy comes out correctly as well.

  5. Can Black Hole Relax Unitarily?

    Science.gov (United States)

    Solodukhin, S. N.

    2005-03-01

    We review the way the BTZ black hole relaxes back to thermal equilibrium after a small perturbation and how it is seen in the boundary (finite volume) CFT. The unitarity requires the relaxation to be quasi-periodic. It is preserved in the CFT but is not obvious in the case of the semiclassical black hole the relaxation of which is driven by complex quasi-normal modes. We discuss two ways of modifying the semiclassical black hole geometry to maintain unitarity: the (fractal) brick wall and the worm-hole modification. In the latter case the entropy comes out correctly as well.

  6. Variational formulation of relaxed and multi-region relaxed magnetohydrodynamics

    OpenAIRE

    Dewar, Robert L.; Yoshida, Zensho; Bhattacharjee, Amitava; Hudson, Stuart R.

    2015-01-01

    Ideal magnetohydrodynamics (IMHD) is strongly constrained by an infinite number of microscopic constraints expressing mass, entropy and magnetic flux conservation in each infinitesimal fluid element, the latter preventing magnetic reconnection. By contrast, in the Taylor relaxation model for formation of macroscopically self-organized plasma equilibrium states, all these constraints are relaxed save for global magnetic fluxes and helicity. A Lagrangian variational principle is presented that ...

  7. DuQuad: an inexact (augmented) dual first order algorithm for quadratic programming

    OpenAIRE

    Necoara, Ion; Patrascu, Andrei

    2015-01-01

    In this paper we present the solver DuQuad specialized for solving general convex quadratic problems arising in many engineering applications. When it is difficult to project on the primal feasible set, we use the (augmented) Lagrangian relaxation to handle the complicated constraints and then, we apply dual first order algorithms based on inexact dual gradient information for solving the corresponding dual problem. The iteration complexity analysis is based on two types of approximate primal...

  8. Tracking for Outdoor Mobile Augmented Reality: Further development of the Zion Augmented Reality Application

    OpenAIRE

    Strand, Tor Egil Riegels

    2008-01-01

    This report deals with providing tracking to an outdoor mobile augmented reality system and the Zion Augmented Reality Application. ZionARA is meant to display a virtual recreation of a 13th century castle on the site it once stood through an augmented reality Head Mounted Display. Mobile outdoor augmented/mixed reality puts special demands on what kind of equipment is practical. After briefly evaluating the different existing tracking methods, a solution based on GPS and an augmented inertia...

  9. A unified approach to an augmented Burgers equation for the propagation of sonic booms.

    Science.gov (United States)

    Yamamoto, Masafumi; Hashimoto, Atsushi; Aoyama, Takashi; Sakai, Takeharu

    2015-04-01

    Nonlinear propagation through a relaxing atmosphere of pressure disturbances extracted from a computational fluid dynamics (CFD) solution of the flow around a supersonic aircraft is simulated using an augmented Burgers equation. The effects of nonlinearity, geometrical spreading, atmospheric inhomogeneity, thermoviscous attenuation, and molecular vibration relaxation are taken into account. The augmented Burgers equation used for sonic boom propagation calculations is often solved by the operator splitting method, but numerical difficulties arise with this approach when dissipation is not effective. By re-examining the solution algorithms for the augmented Burgers equation, a stable method for handling the relaxation effect has been developed. This approach can handle the Burgers equation in a unified manner without operator splitting and, therefore, the resulting scheme is twice as fast as the original one. The approach is validated by comparing it with an analytical solution and a detailed CFD of dispersed plane wave propagation. In addition, a rise time prediction of low-boom supersonic aircraft is demonstrated. PMID:25920838

  10. An Exact Relaxation of Clustering

    DEFF Research Database (Denmark)

    Mørup, Morten; Hansen, Lars Kai

    2009-01-01

    of clustering problems such as the K-means objective and pairwise clustering as well as graph partition problems, e.g., for community detection in complex networks. In particular we show that a relaxation to the simplex can be given for which the extreme solutions are stable hard assignment solutions and vice......Continuous relaxation of hard assignment clustering problems can lead to better solutions than greedy iterative refinement algorithms. However, the validity of existing relaxations is contingent on problem specific fuzzy parameters that quantify the level of similarity between the original...... versa. Based on the new relaxation we derive the SR-clustering algorithm that has the same complexity as traditional greedy iterative refinement algorithms but leading to significantly better partitions of the data. A Matlab implementation of the SR-clustering algorithm is available for download....

  11. Polarization and relaxation of radon

    CERN Document Server

    Tardiff, E R; Chupp, T E; Gulyuz, K; Lefferts, R S; Lorenzon, W; Nuss-Warren, S R; Pearson, M R; Pietralla, N; Rainovski, G; Sell, J F; Sprouse, G D

    2006-01-01

    Investigations of the polarization and relaxation of $^{209}$Rn by spin exchange with laser optically pumped rubidium are reported. On the order of one million atoms per shot were collected in coated and uncoated glass cells. Gamma-ray anisotropies were measured as a signal of the alignment (second order moment of the polarization) resulting from the combination of polarization and quadrupole relaxation at the cell walls. The temperature dependence over the range 130$^\\circ$C to 220$^\\circ$C shows the anisotropies increasing with increasing temperature as the ratio of the spin exchange polarization rate to the wall relaxation rate increases faster than the rubidium polarization decreases. Polarization relaxation rates for coated and uncoated cells are presented. In addition, improved limits on the multipole mixing ratios of some of the main gamma-ray transitions have been extracted. These results are promising for electric dipole moment measurements of octupole-deformed $^{223}$Rn and other isotopes, provided...

  12. Archiving the Relaxed Consistency Web

    OpenAIRE

    Xie, Zhiwu; Van de Sompel, Herbert; Liu, Jinyang; Van Reenen, Johann; Jordan, Ramiro

    2013-01-01

    The historical, cultural, and intellectual importance of archiving the web has been widely recognized. Today, all countries with high Internet penetration rate have established high-profile archiving initiatives to crawl and archive the fast-disappearing web content for long-term use. As web technologies evolve, established web archiving techniques face challenges. This paper focuses on the potential impact of the relaxed consistency web design on crawler driven web archiving. Relaxed consist...

  13. Negative magnetic relaxation in superconductors

    Directory of Open Access Journals (Sweden)

    Krasnoperov E.P.

    2013-01-01

    Full Text Available It was observed that the trapped magnetic moment of HTS tablets or annuli increases in time (negative relaxation if they are not completely magnetized by a pulsed magnetic field. It is shown, in the framework of the Bean critical-state model, that the radial temperature gradient appearing in tablets or annuli during a pulsed field magnetization can explain the negative magnetic relaxation in the superconductor.

  14. Entropy relaxation of ASDEX plasmas

    International Nuclear Information System (INIS)

    In tokamak discharges with improved ohmic confinement (IOC) in ASDEX a transition is observed from flat density profiles towards more peaked ones, while the normalized temperature profile is preserved. For this behaviour of the radial profiles it is shown that the entropy of the plasma increases during the IOC phase. Hence IOC and entropy relaxation are closely related. If the IOC phase is long enough, one finds stationary plasma states, which are compared with the relaxed state described in theory. (orig.)

  15. Digital Illumination for Augmented Studios

    Directory of Open Access Journals (Sweden)

    Stefanie Zollmann

    2006-12-01

    Full Text Available Virtual studio technology plays an important role for modern television productions. Blue-screen matting is a common technique for integrating real actors or moderators into computer generated sceneries. Augmented reality offers the possibility to mix real and virtual in a more general context. This article proposes a new technological approach for combining real studio content with computer-generated information. Digital light projection allows a controlled spatial, temporal, chrominance and luminance modulation of illumination opening new possibilities for TV studios.

  16. Webizing mobile augmented reality content

    Science.gov (United States)

    Ahn, Sangchul; Ko, Heedong; Yoo, Byounghyun

    2014-01-01

    This paper presents a content structure for building mobile augmented reality (AR) applications in HTML5 to achieve a clean separation of the mobile AR content and the application logic for scaling as on the Web. We propose that the content structure contains the physical world as well as virtual assets for mobile AR applications as document object model (DOM) elements and that their behaviour and user interactions are controlled through DOM events by representing objects and places with a uniform resource identifier. Our content structure enables mobile AR applications to be seamlessly developed as normal HTML documents under the current Web eco-system.

  17. Indeterminacy and labor augmenting externalities

    DEFF Research Database (Denmark)

    Poulsen, Odile; Goenka, Aditya

    2002-01-01

    In this two-sector discrete time model of endogenous economic growth intersectoral effects are assumed to be "labor augmenting" We derive necessary and sufficient conditions for local indeterminacy and multiplicity of the balanced growth path in terms of factor intensities in both sectors....... The balanced growth path is unique if the consumption good sector is more capital intensive. However, it can be indeterminate. When the investment good sector is more capital intensive a sufficient condition for indeterminacy is that there exists at least three balanced growth paths....

  18. Phase transitions in semidefinite relaxations.

    Science.gov (United States)

    Javanmard, Adel; Montanari, Andrea; Ricci-Tersenghi, Federico

    2016-04-19

    Statistical inference problems arising within signal processing, data mining, and machine learning naturally give rise to hard combinatorial optimization problems. These problems become intractable when the dimensionality of the data is large, as is often the case for modern datasets. A popular idea is to construct convex relaxations of these combinatorial problems, which can be solved efficiently for large-scale datasets. Semidefinite programming (SDP) relaxations are among the most powerful methods in this family and are surprisingly well suited for a broad range of problems where data take the form of matrices or graphs. It has been observed several times that when the statistical noise is small enough, SDP relaxations correctly detect the underlying combinatorial structures. In this paper we develop asymptotic predictions for several detection thresholds, as well as for the estimation error above these thresholds. We study some classical SDP relaxations for statistical problems motivated by graph synchronization and community detection in networks. We map these optimization problems to statistical mechanics models with vector spins and use nonrigorous techniques from statistical mechanics to characterize the corresponding phase transitions. Our results clarify the effectiveness of SDP relaxations in solving high-dimensional statistical problems. PMID:27001856

  19. Augmented reality in medical education?

    Science.gov (United States)

    Kamphuis, Carolien; Barsom, Esther; Schijven, Marlies; Christoph, Noor

    2014-09-01

    Learning in the medical domain is to a large extent workplace learning and involves mastery of complex skills that require performance up to professional standards in the work environment. Since training in this real-life context is not always possible for reasons of safety, costs, or didactics, alternative ways are needed to achieve clinical excellence. Educational technology and more specifically augmented reality (AR) has the potential to offer a highly realistic situated learning experience supportive of complex medical learning and transfer. AR is a technology that adds virtual content to the physical real world, thereby augmenting the perception of reality. Three examples of dedicated AR learning environments for the medical domain are described. Five types of research questions are identified that may guide empirical research into the effects of these learning environments. Up to now, empirical research mainly appears to focus on the development, usability and initial implementation of AR for learning. Limited review results reflect the motivational value of AR, its potential for training psychomotor skills and the capacity to visualize the invisible, possibly leading to enhanced conceptual understanding of complex causality. PMID:24464832

  20. Psychotherapy augmentation through preconscious priming

    Directory of Open Access Journals (Sweden)

    Francois eBorgeat

    2013-03-01

    Full Text Available Objective: To test the hypothesis that repeated preconscious (masked priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy.Methods: Twenty social phobic patients (13 women completed a 36 weeks study beginning by 12 weeks of group behavioural therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming condition involved listening twice daily with a passive attitude to a recording of individualized formulations of appropriate cognitions and attitudes masked by music. The Control condition involved listening to an indistinguishable recording where the formulations had been replaced by random numbers. Changes in social cognitions were measured by the Social Interaction Self Statements Test (SISST.Results: Patients improved following therapy. The Priming procedure was associated with increased positive cognitions and decreased negative cognitions on the SISST while the Control procedure was not. The Priming procedure induced more cognitive change when applied immediately after the group therapy. Conclusion: An effect of priming was observed on social phobia related cognitions in the expected direction. This self administered addition to a therapy could be seen as an augmentation strategy.

  1. Augmented reality in medical education?

    Science.gov (United States)

    Kamphuis, Carolien; Barsom, Esther; Schijven, Marlies; Christoph, Noor

    2014-09-01

    Learning in the medical domain is to a large extent workplace learning and involves mastery of complex skills that require performance up to professional standards in the work environment. Since training in this real-life context is not always possible for reasons of safety, costs, or didactics, alternative ways are needed to achieve clinical excellence. Educational technology and more specifically augmented reality (AR) has the potential to offer a highly realistic situated learning experience supportive of complex medical learning and transfer. AR is a technology that adds virtual content to the physical real world, thereby augmenting the perception of reality. Three examples of dedicated AR learning environments for the medical domain are described. Five types of research questions are identified that may guide empirical research into the effects of these learning environments. Up to now, empirical research mainly appears to focus on the development, usability and initial implementation of AR for learning. Limited review results reflect the motivational value of AR, its potential for training psychomotor skills and the capacity to visualize the invisible, possibly leading to enhanced conceptual understanding of complex causality.

  2. Preprint ARPPS Augmented Reality Pipeline Prospect System

    OpenAIRE

    Zhang, Xiaolei; Han, Yong; Hao, DongSheng; Lv, Zhihan

    2015-01-01

    This is the preprint version of our paper on ICONIP. Outdoor augmented reality geographic information system (ARGIS) is the hot application of augmented reality over recent years. This paper concludes the key solutions of ARGIS, designs the mobile augmented reality pipeline prospect system (ARPPS), and respectively realizes the machine vision based pipeline prospect system (MVBPPS) and the sensor based pipeline prospect system (SBPPS). With the MVBPPS's realization, this paper studies the neu...

  3. Augmented Reality Using JavaScript

    OpenAIRE

    Hailemichael, Aida

    2013-01-01

    The project goal was to provide a mobile application, for a venue called Kulturhuset Karelia which is located in Tammisaari Finland. In this paper, the concept of Augmented Reality technology is briefly discussed along with the mobile application for the venue. The utilisation of JavaScript for creating Augmented reality content for mobile Augmented reality browser is also demonstrated. The application was created by using Architecht API which is Jacvascript library based on the Wikitude...

  4. InAR:Inverse Augmented Reality

    OpenAIRE

    Hu, Hao; Cui, Hainan

    2015-01-01

    Augmented reality is the art to seamlessly fuse virtual objects into real ones. In this short note, we address the opposite problem, the inverse augmented reality, that is, given a perfectly augmented reality scene where human is unable to distinguish real objects from virtual ones, how the machine could help do the job. We show by structure from motion (SFM), a simple 3D reconstruction technique from images in computer vision, the real and virtual objects can be easily separated in the recon...

  5. Interactive Assembly Guide using Augmented Reality

    DEFF Research Database (Denmark)

    Andersen, Martin; Andersen, Rasmus Skovgaard; Larsen, Christian Lindequist;

    2009-01-01

    This paper presents an Augmented Reality system for aiding a pump assembling process at Grundfos, one of the leading pump producers. Stable pose estimation of the pump is required in order to augment the graphics correctly. This is achieved by matching image edges with synthesized edges from CAD...... norm. A dynamic visualization of the augmented graphics provides the user with guidance. Usability tests show that the accuracy of the system is sufficient for assembling the pump....

  6. AB027. Penile augmentation: informed text briefing

    OpenAIRE

    Park, Nam Cheol

    2016-01-01

    The men’s desire to have larger and longer penis have created endless medical demands throughout human history. Until up to date, various medical skills for penile augmentation have developed in aspect of experimental and clinical outcome. Recently with throwing away socially unacceptable ideas, the need for penile augmentation is considered as equivalent level with mammoplasty for breast augmentation in women for cosmetic and psychological reason. Concurrently advanced technologies in medica...

  7. Relaxed Poisson cure rate models.

    Science.gov (United States)

    Rodrigues, Josemar; Cordeiro, Gauss M; Cancho, Vicente G; Balakrishnan, N

    2016-03-01

    The purpose of this article is to make the standard promotion cure rate model (Yakovlev and Tsodikov, ) more flexible by assuming that the number of lesions or altered cells after a treatment follows a fractional Poisson distribution (Laskin, ). It is proved that the well-known Mittag-Leffler relaxation function (Berberan-Santos, ) is a simple way to obtain a new cure rate model that is a compromise between the promotion and geometric cure rate models allowing for superdispersion. So, the relaxed cure rate model developed here can be considered as a natural and less restrictive extension of the popular Poisson cure rate model at the cost of an additional parameter, but a competitor to negative-binomial cure rate models (Rodrigues et al., ). Some mathematical properties of a proper relaxed Poisson density are explored. A simulation study and an illustration of the proposed cure rate model from the Bayesian point of view are finally presented. PMID:26686485

  8. Augmenting Locomotion in an Anthropomorphic System

    Directory of Open Access Journals (Sweden)

    Derek Wight

    2005-02-01

    Full Text Available A powered orthosis has applications ranging from assisting the elderly to augmenting astronauts. An assistive control scheme is developed that uses the force from a slave actuator to augment the force of a master actuator. This can be used to augment a closed-loop control scheme applied to the master actuator. Initially, actuator augmentation is explored both theoretically and experimentally using a simple mechanical system. The control scheme is then applied to a scale model of human lower limbs on a stationary bicycle to investigate the feasibility of a powered orthosis using pneumatic muscle actuators.

  9. RFIDice - Augmenting Tabletop Dice with RFID

    Directory of Open Access Journals (Sweden)

    Marc Langheinrich

    2008-08-01

    Full Text Available Augmented dice allow players of tabletop games to have the result of a roll be automatically recorded by a computer, e.g., for supporting strategy games. We have built a set of three augmented-dice-prototypes based on radio frequency identification (RFID technology, which allows us to build robust, cheap, and small augmented dice. Using a corresponding readout infrastructure and a sample application, we have evaluated our approach and show its advantages over other dice augmentation methods discussed in the literature.

  10. Thermal relaxation and mechanical relaxation of rice gel

    Institute of Scientific and Technical Information of China (English)

    丁玉琴; 赵思明; 熊善柏

    2008-01-01

    Rice gel was prepared by simulating the production processes of Chinese local rice noodles,and the properties of thermal relaxation and mechanical relaxation during gelatinization were studied by differential scanning calorimetry(DSC) measurement and dynamic rheometer.The results show that during gelatinization,the molecular chains of rice starch undergo the thermal relaxation and mechanical relaxation.During the first heating and high temperature holding processes,the starch crystallites in the rice slurry melt,and the polymer chains stretch and interact,then viscoelastic gel forms.The cooling and low temperatures holding processes result in reinforced networks and decrease the viscoelasticity of the gel.During the second heating,the remaining starch crystallites further melt,the network is reinforced,and the viscoelasticity increases.The viscoelasticity,the molecular conformation and texture of the gel are adjusted by changing the temperature,and finally construct the gel with the textural characteristics of Chinese local rice noodle.

  11. LAVENDER AROMATERAPHY AS A RELAXANT

    Directory of Open Access Journals (Sweden)

    IGA Prima Dewi AP

    2013-02-01

    Full Text Available Aromatherapy is a kind of treatment that used aroma with aromatherapy essential oil. Extraction process from essential oil generally doing in three methods, there are distilling with water (boiled, distilling with water and steam, and distilling with steam. One of the most favorite aroma is lavender. The main content from lavender is linalyl acetate and linalool (C10H18O. Linalool is main active contents in lavender which can use for anti-anxiety (relaxation. Based on some research, the conclusion indicates that essential oil from lavender can give relaxation (carminative, sedative, reduce anxiety level and increasing mood.

  12. Augmented reality for improved safety

    CERN Multimedia

    Stefania Pandolfi

    2016-01-01

    Sometimes, CERN experts have to operate in low visibility conditions or in the presence of possible hazards. Minimising the duration of the operation and reducing the risk of errors is therefore crucial to ensuring the safety of personnel. The EDUSAFE project integrates different technologies to create a wearable personnel safety system based on augmented reality.    The EDUSAFE integrated safety system uses a camera mounted on the helmet to monitor the working area.  In its everyday operation of machines and facilities, CERN adopts a whole set of measures and safety equipment to ensure the safety of its personnel, including personal wearable safety devices and access control systems. However, sometimes, scheduled and emergency maintenance work needs to be done in zones with potential cryogenic hazards, in the presence of radioactive equipment or simply in demanding conditions where visibility is low and moving around is difficult. The EDUSAFE Marie Curie Innovative&...

  13. Sensory augmentation for the blind

    Directory of Open Access Journals (Sweden)

    Silke Manuela Kärcher

    2012-03-01

    Full Text Available Enacted theories of consciousness conjecture that perception and cognition arise from an active experience of the regular relations that are tying together the sensory stimulation of different modalities and associated motor actions. Previous experiments investigated this concept by employing the technique of sensory substitution. Building on these studies, here we test a set of hypotheses derived from this framework and investigate the utility of sensory augmentation in handicapped people. We provide a late blind subject with a new set of sensorimotor laws: A vibro-tactile belt continually signals the direction of magnetic north. The subject completed a set of behavioral tests before and after an extended training period. The tests were complemented by questionnaires and interviews. This newly supplied information improved performance on different time scales. In a pointing task we demonstrate an instant improvement of performance based on the signal provided by the device. Furthermore, the signal was helpful in relevant daily tasks, often complicated for the blind, such as keeping a direction over longer distances or taking shortcuts in familiar environments. A homing task with an additional attentional load demonstrated a significant improvement after training. The subject found the directional information highly expedient for the adjustment of his inner maps of familiar environments and describes an increase in his feeling of security when exploring unfamiliar environments with the belt. The results give evidence for a firm integration of the newly supplied signals into the behavior of this late blind subject with better navigational performance and more courageous behavior in unfamiliar environments. Most importantly, the complementary information provided by the belt lead to a positive emotional impact with enhanced feeling of security. This experimental approach demonstrates the potential of sensory augmentation devices for the help of

  14. Relaxation properties in classical diamagnetism

    Science.gov (United States)

    Carati, A.; Benfenati, F.; Galgani, L.

    2011-06-01

    It is an old result of Bohr that, according to classical statistical mechanics, at equilibrium a system of electrons in a static magnetic field presents no magnetization. Thus a magnetization can occur only in an out of equilibrium state, such as that produced through the Foucault currents when a magnetic field is switched on. It was suggested by Bohr that, after the establishment of such a nonequilibrium state, the system of electrons would quickly relax back to equilibrium. In the present paper, we study numerically the relaxation to equilibrium in a modified Bohr model, which is mathematically equivalent to a billiard with obstacles, immersed in a magnetic field that is adiabatically switched on. We show that it is not guaranteed that equilibrium is attained within the typical time scales of microscopic dynamics. Depending on the values of the parameters, one has a relaxation either to equilibrium or to a diamagnetic (presumably metastable) state. The analogy with the relaxation properties in the Fermi Pasta Ulam problem is also pointed out.

  15. Choosing a skeletal muscle relaxant.

    Science.gov (United States)

    See, Sharon; Ginzburg, Regina

    2008-08-01

    Skeletal muscle relaxants are widely used in treating musculoskeletal conditions. However, evidence of their effectiveness consists mainly of studies with poor methodologic design. In addition, these drugs have not been proven to be superior to acetaminophen or nonsteroidal anti-inflammatory drugs for low back pain. Systematic reviews and meta-analyses support using skeletal muscle relaxants for short-term relief of acute low back pain when nonsteroidal anti-inflammatory drugs or acetaminophen are not effective or tolerated. Comparison studies have not shown one skeletal muscle relaxant to be superior to another. Cyclobenzaprine is the most heavily studied and has been shown to be effective for various musculoskeletal conditions. The sedative properties of tizanidine and cyclobenzaprine may benefit patients with insomnia caused by severe muscle spasms. Methocarbamol and metaxalone are less sedating, although effectiveness evidence is limited. Adverse effects, particularly dizziness and drowsiness, are consistently reported with all skeletal muscle relaxants. The potential adverse effects should be communicated clearly to the patient. Because of limited comparable effectiveness data, choice of agent should be based on side-effect profile, patient preference, abuse potential, and possible drug interactions. PMID:18711953

  16. Anisotropic spin relaxation in graphene

    NARCIS (Netherlands)

    Tombros, N.; Tanabe, S.; Veligura, A.; Jozsa, C.; Popinciuc, M.; Jonkman, H. T.; van Wees, B. J.

    2008-01-01

    Spin relaxation in graphene is investigated in electrical graphene spin valve devices in the nonlocal geometry. Ferromagnetic electrodes with in-plane magnetizations inject spins parallel to the graphene layer. They are subject to Hanle spin precession under a magnetic field B applied perpendicular

  17. Dielectric relaxation of samarium aluminate

    Energy Technology Data Exchange (ETDEWEB)

    Sakhya, Anup Pradhan; Dutta, Alo; Sinha, T.P. [Bose Institute, Department of Physics, Kolkata (India)

    2014-03-15

    A ceramic SmAlO{sub 3} (SAO) sample is synthesized by the solid-state reaction technique. The Rietveld refinement of the X-ray diffraction pattern has been done to find the crystal symmetry of the sample at room temperature. An impedance spectroscopy study of the sample has been performed in the frequency range from 50 Hz to 1 MHz and in the temperature range from 313 K to 573 K. Dielectric relaxation peaks are observed in the imaginary parts of the spectra. The Cole-Cole model is used to analyze the dielectric relaxation mechanism in SAO. The temperature-dependent relaxation times are found to obey the Arrhenius law having an activation energy of 0.29 eV, which indicates that polaron hopping is responsible for conduction or dielectric relaxation in this material. The complex impedance plane plot of the sample indicates the presence of both grain and grain-boundary effects and is analyzed by an electrical equivalent circuit consisting of a resistance and a constant-phase element. The frequency-dependent conductivity spectra follow a double-power law due to the presence of two plateaus. (orig.)

  18. Enhancing Education through Mobile Augmented Reality

    Science.gov (United States)

    Joan, D. R. Robert

    2015-01-01

    In this article, the author has discussed about the Mobile Augmented Reality and enhancing education through it. The aim of the present study was to give some general information about mobile augmented reality which helps to boost education. Purpose of the current study reveals the mobile networks which are used in the institution campus as well…

  19. Motor skill learning: age and augmented feedback

    NARCIS (Netherlands)

    Dijk, van Henk

    2006-01-01

    Learning motor skills is fundamental to human life. One of the most critical variables affecting motor learning, aside from practice itself, is augmented feedback (performance-related information). Although there is abundance of research on how young adults use augmented feedback to learn motor skil

  20. From Augmentation Media to Meme Media.

    Science.gov (United States)

    Tanaka, Yuzuru

    Computers as meta media are now evolving from augmentation media vehicles to meme media vehicles. While an augmentation media system provides a seamlessly integrated environment of various tools and documents, meme media system provides further functions to edit and distribute tools and documents. Documents and tools on meme media can easily…

  1. (-)Epicatechin induces and modulates endothelium-dependent relaxation in isolated rat mesenteric artery rings

    Institute of Scientific and Technical Information of China (English)

    YAO Xiao-Qiang; CHAN Franky Leung; LAU Chi-Wai; HUANG Yu

    2002-01-01

    AIM: The present study was aimed to examine the role of endothelial nitric oxide in the relaxant response to green tea (-)epicatechin and its modulation of endothelium-mediated relaxation in the isolated rat mesenteric artery rings.METHODS: Changes in the isometric tension were measured with Grass force-displacement transducers. RESULTS:The (-)epicatechin-induced relaxation was largely dependent on the presence of intact endothelium and was reversed by NG-nitro-L-arginine methyl ester 10 μmol/L or methylene blue 10 μmol/L, the inhibitors of nitric oxidemediated relaxation. L-Arginine at 1 mmol/L antagonized the effect of L-NAME or methylene blue. Pretreatment of endothelium-intact rings with (-)epicatechin 10 μmol/L enhanced the relaxation induced by endothelium-dependent vasodilator, acetylcholine, while this concentration did not influence the endothelium-independent relaxation induced by sodium nitroprusside in the endothelium-denuded artery rings. CONCLUSION: The results indicate that the endothelium-dependent vasodilation by (-)epicatechin is mainly mediated through nitric oxide and low concentration of (-)epicatechin augments endothelium-dependent vasorelaxation in the rat mesenteric arteries.

  2. Augmented Reality Implementation Methods in Mainstream Applications

    CERN Document Server

    Prochazka, David

    2011-01-01

    Augmented reality has became an useful tool in many areas from space exploration to military applications. Although used theoretical principles are well known for almost a decade, the augmented reality is almost exclusively used in high budget solutions with a special hardware. However, in last few years we could see rising popularity of many projects focused on deployment of the augmented reality on different mobile devices. Our article is aimed on developers who consider development of an augmented reality application for the mainstream market. Such developers will be forced to keep the application price, therefore also the development price, at reasonable level. Usage of existing image processing software library could bring a significant cut-down of the development costs. In the theoretical part of the article is presented an overview of the augmented reality application structure. Further, an approach for selection appropriate library as well as the review of the existing software libraries focused in th...

  3. Diffuser Augmented Horizontal Axis Tidal Current Turbines

    Directory of Open Access Journals (Sweden)

    Nasir Mehmood

    2012-09-01

    Full Text Available The renewal energy technologies are increasingly popular to ensure future energy sustenance and address environmental issues. The tides are enormous and consistent untapped resource of renewable energy. The growing interest in exploring tidal energy has compelling reasons such as security and diversity of supply, intermittent but predictable and limited social and environmental impacts. The tidal energy industry is undergoing an increasing shift towards diffuser augmented turbines. The reason is the higher power output of diffuser augmented turbines compared to conventional open turbines. The purpose of this study is to present a comprehensive review of diffuser augmented horizontal axis tidal current turbines. The components, relative advantages, limitations and design parameters of diffuser augmented horizontal axis tidal current turbines are presented in detail. CFD simulation of NACA 0016 airfoil is carried out to explore its potential for designing a diffuser. The core issues associated with diffuser augmented horizontal axis tidal current turbines are also discussed.

  4. Plasmon-mediated energy relaxation in graphene

    Energy Technology Data Exchange (ETDEWEB)

    Ferry, D. K. [School of Electrical, Computer, and Energy Engineering, Arizona State University, Tempe, Arizona 85287-5706 (United States); Somphonsane, R. [Department of Physics, King Mongkut' s Institute of Technology, Ladkrabang, Bangkok 10520 (Thailand); Ramamoorthy, H.; Bird, J. P. [Department of Electrical Engineering, University at Buffalo, the State University of New York, Buffalo, New York 14260-1500 (United States)

    2015-12-28

    Energy relaxation of hot carriers in graphene is studied at low temperatures, where the loss rate may differ significantly from that predicted for electron-phonon interactions. We show here that plasmons, important in the relaxation of energetic carriers in bulk semiconductors, can also provide a pathway for energy relaxation in transport experiments in graphene. We obtain a total loss rate to plasmons that results in energy relaxation times whose dependence on temperature and density closely matches that found experimentally.

  5. Plasmon-mediated energy relaxation in graphene

    Science.gov (United States)

    Ferry, D. K.; Somphonsane, R.; Ramamoorthy, H.; Bird, J. P.

    2015-12-01

    Energy relaxation of hot carriers in graphene is studied at low temperatures, where the loss rate may differ significantly from that predicted for electron-phonon interactions. We show here that plasmons, important in the relaxation of energetic carriers in bulk semiconductors, can also provide a pathway for energy relaxation in transport experiments in graphene. We obtain a total loss rate to plasmons that results in energy relaxation times whose dependence on temperature and density closely matches that found experimentally.

  6. Wireless Augmented Reality Prototype (WARP)

    Science.gov (United States)

    Devereaux, A. S.

    1999-01-01

    Initiated in January, 1997, under NASA's Office of Life and Microgravity Sciences and Applications, the Wireless Augmented Reality Prototype (WARP) is a means to leverage recent advances in communications, displays, imaging sensors, biosensors, voice recognition and microelectronics to develop a hands-free, tetherless system capable of real-time personal display and control of computer system resources. Using WARP, an astronaut may efficiently operate and monitor any computer-controllable activity inside or outside the vehicle or station. The WARP concept is a lightweight, unobtrusive heads-up display with a wireless wearable control unit. Connectivity to the external system is achieved through a high-rate radio link from the WARP personal unit to a base station unit installed into any system PC. The radio link has been specially engineered to operate within the high- interference, high-multipath environment of a space shuttle or space station module. Through this virtual terminal, the astronaut will be able to view and manipulate imagery, text or video, using voice commands to control the terminal operations. WARP's hands-free access to computer-based instruction texts, diagrams and checklists replaces juggling manuals and clipboards, and tetherless computer system access allows free motion throughout a cabin while monitoring and operating equipment.

  7. Augmented Reality for Android Platform

    OpenAIRE

    Lžičař, Radek

    2011-01-01

    Tato diplomová práce se zabývá návrhem a realizací systému rozšířené reality na mobilní platformě Google Android s využitím polohových senzorů. Aplikace slouží jako navigace a zobrazuje geografické body zájmu. Práce se věnuje problematice rozšířené reality na mobilních zařízeních, návrhem vlastního frameworku a poté zmiňuje detaily implementace vybraných problémů. Nakonec je popsán způsob testování a zhodnoceny výsledky práce. This thesis describes design and implementation of augment...

  8. Augmented Reality Repair Guidance System

    Directory of Open Access Journals (Sweden)

    Sidharth Bhatia

    2012-07-01

    Full Text Available The daily life of a common man revolves around various forms of appliances/gadgets he uses throughout the day such as a mobile phone, laptop, printer, microwave oven, washing machine, etc. Although these appliances/gadgets are taken by most of the people for granted, the problem occurs when any of these things do not work as they are expected to. Getting them to the repair shops for every small glitch is expensive as well as time consuming. Although most of the companies which produce these appliances/gadgets do supply them with basic manuals, which deal with how to solve these minor issues, but reading them and at the same time repairing the corresponding appliance/gadget can be a frustrating task at times. These problems can be reduced to a large extent if some kind of live guidance is available. In this paper we propose a method to do so with the help of an augmented reality based system that will guide the user to carry out small scale repair jobs on these gadgets. All that is required is a decent webcam and a computing device, with a processor of 1 GHz or more and a display screen.

  9. Mixing Augmentation of Supersonic Streams

    Institute of Scientific and Technical Information of China (English)

    S. Hari; J. Kurian

    2001-01-01

    The use of passive mixing devices to enhance the mixing of supersonic streams is of importance in many aerospace and allied applications. A comparative experimental study of two such non-conventional axi symmetric supersonic nozzles for mixing augmentation is undertaken in the present study. The nozzles studied are conventional convergent divergent (c-d), ramp, and nozzle with secondary tabs at the Mach number of 1.7.The freejet characteristics of the jets from the nozzles and the confined mixing of the jets under isothermal and non-isothermal conditions were experimentally investigated. In addition, schlieren and laser light sheet methods are employed for flow visualization. Results of experiments on freejet showed rapid total pressure decay, higher jet width, and increased shear layer width in the case of jets from non-conventional nozzles. Also visualized were complex shock patterns in these jets. The confined mixing studies in both cold and hot flows confirm the increased mixing behavior of non-conventional nozzles within shorter mixing duct lengths. Laser sheet visualization clearly demonstrated the formation of streamwise vortices, which accounts for the enhanced mixing while employing the nozzles under study.

  10. Digital Augmented Reality Audio Headset

    Directory of Open Access Journals (Sweden)

    Jussi Rämö

    2012-01-01

    Full Text Available Augmented reality audio (ARA combines virtual sound sources with the real sonic environment of the user. An ARA system can be realized with a headset containing binaural microphones. Ideally, the ARA headset should be acoustically transparent, that is, it should not cause audible modification to the surrounding sound. A practical implementation of an ARA mixer requires a low-latency headphone reproduction system with additional equalization to compensate for the attenuation and the modified ear canal resonances caused by the headphones. This paper proposes digital IIR filters to realize the required equalization and evaluates a real-time prototype ARA system. Measurements show that the throughput latency of the digital prototype ARA system can be less than 1.4 ms, which is sufficiently small in practice. When the direct and processed sounds are combined in the ear, a comb filtering effect is brought about and appears as notches in the frequency response. The comb filter effect in speech and music signals was studied in a listening test and it was found to be inaudible when the attenuation is 20 dB. Insert ARA headphones have a sufficient attenuation at frequencies above about 1 kHz. The proposed digital ARA system enables several immersive audio applications, such as a virtual audio tourist guide and audio teleconferencing.

  11. Augmented reality: past, present, future

    Science.gov (United States)

    Inzerillo, Laura

    2013-03-01

    A great opportunity has permitted to carry out a cultural, historical, architectural and social research with great impact factor on the international cultural interest. We are talking about the realization of a museum whose the main theme is the visit and the discovery of a monument of great prestige: the monumental building the "Steri" in Palermo. The museum is divided into sub themes including the one above all, that has aroused the international interest so much that it has been presented the instance to include the museum in the cultural heritage of UNESCO. It is the realization of a museum path that regards the cells of the Inquisition, which are located just inside of some buildings of the monumental building. The project, as a whole, is faced, in a total view, between the various competences implicated: historic, chemic, architectonic, topographic, drawing, representation, virtual communication, informatics. The birth of the museum will be a sum of the results of all these disciplines involved. Methodology, implementation, fruition, virtual museum, goals, 2D graphic restitution, effects on the cultural heritage and landscape environmental, augmented reality, Surveying 2D and 3D, hi-touch screen, Photogrammetric survey, Photographic survey, representation, drawing 3D and more than this has been dealt with this research.

  12. Nonequilibrium interfacial tension during relaxation.

    Science.gov (United States)

    Bier, Markus

    2015-10-01

    The concept of a nonequilibrium interfacial tension, defined via the work required to deform a system such that the interfacial area is changed while the volume is conserved, is investigated theoretically in the context of the relaxation of an initial perturbation of a colloidal fluid towards the equilibrium state. The corresponding general formalism is derived for systems with planar symmetry and applied to fluid models of colloidal suspensions and polymer solutions. It is shown that the nonequilibrium interfacial tension is not necessarily positive, that negative nonequilibrium interfacial tensions are consistent with strictly positive equilibrium interfacial tensions, and that the sign of the interfacial tension can influence the morphology of density perturbations during relaxation. PMID:26565189

  13. Kinetic activation-relaxation technique.

    Science.gov (United States)

    Béland, Laurent Karim; Brommer, Peter; El-Mellouhi, Fedwa; Joly, Jean-François; Mousseau, Normand

    2011-10-01

    We present a detailed description of the kinetic activation-relaxation technique (k-ART), an off-lattice, self-learning kinetic Monte Carlo (KMC) algorithm with on-the-fly event search. Combining a topological classification for local environments and event generation with ART nouveau, an efficient unbiased sampling method for finding transition states, k-ART can be applied to complex materials with atoms in off-lattice positions or with elastic deformations that cannot be handled with standard KMC approaches. In addition to presenting the various elements of the algorithm, we demonstrate the general character of k-ART by applying the algorithm to three challenging systems: self-defect annihilation in c-Si (crystalline silicon), self-interstitial diffusion in Fe, and structural relaxation in a-Si (amorphous silicon).

  14. LAVENDER AROMATERAPHY AS A RELAXANT

    OpenAIRE

    IGA Prima Dewi AP

    2013-01-01

    Aromatherapy is a kind of treatment that used aroma with aromatherapy essential oil. Extraction process from essential oil generally doing in three methods, there are distilling with water (boiled), distilling with water and steam, and distilling with steam. One of the most favorite aroma is lavender. The main content from lavender is linalyl acetate and linalool (C10H18O). Linalool is main active contents in lavender which can use for anti-anxiety (relaxation). Based on some research, the co...

  15. The Virtuality and Reality of Augmented Reality

    Directory of Open Access Journals (Sweden)

    Jung Yeon Ma

    2007-02-01

    Full Text Available This thesis explores the creative possibilities and implications of Augmented Reality, not just as a specific technology of computer science, but as one of high technologies that influence people’s perception and even the concepts of the real and the virtual. For a broader definition of Augmented Reality which has a unique status between virtual environment and real environment, the virtuality and the reality of Augmented Reality are discussed in an interdisciplinary context such as arts, philosophy, and film and animation studies. This approach is rooted in the belief that theory of new media ought to traverse and encompass all realms of academic categories.

  16. Augmented reality-assisted skull base surgery.

    Science.gov (United States)

    Cabrilo, I; Sarrafzadeh, A; Bijlenga, P; Landis, B N; Schaller, K

    2014-12-01

    Neuronavigation is widely considered as a valuable tool during skull base surgery. Advances in neuronavigation technology, with the integration of augmented reality, present advantages over traditional point-based neuronavigation. However, this development has not yet made its way into routine surgical practice, possibly due to a lack of acquaintance with these systems. In this report, we illustrate the usefulness and easy application of augmented reality-based neuronavigation through a case example of a patient with a clivus chordoma. We also demonstrate how augmented reality can help throughout all phases of a skull base procedure, from the verification of neuronavigation accuracy to intraoperative image-guidance.

  17. Muzzle shunt augmentation of conventional railguns

    Energy Technology Data Exchange (ETDEWEB)

    Parker, J.V. (Los Alamos National Lab., NM (United States). Physics Div.)

    1991-01-01

    This paper reports on augmentation which is a technique for reducing the armature current and hence the armature power dissipation in a plasma armature railgun. In spite of the advantages, no large augmented railguns have been built, primarily due to the mechanical and electrical complexity introduced by the extra conductors required. it is possible to achieve some of the benefits of augmentation in a conventional railgun by diverting a fraction {phi} of the input current through a shunt path at the muzzle of the railgun. In particular, the relation between force and armature current is the same as that obtained in an n-turn, series-connected augmented railgun with n = 1/(1 {minus} {phi}). The price of this simplification is a reduction in electrical efficiency and some additional complexity in the external electrical system.

  18. Resonant Behavior of an Augmented Railgun

    CERN Document Server

    Bahder, Thomas B

    2011-01-01

    We consider a lumped circuit model of an augmented electromagnetic railgun that consists of a gun circuit and an augmentation circuit that is inductively coupled to the gun circuit. The gun circuit is driven by a d.c. voltage generator, and the augmentation circuit is driven by an a.c. voltage generator. Using sample parameters, we numerically solve the three non-linear dynamical equations that describe this system. We find that there is a resonant behavior in the armature kinetic energy as a function of the frequency of the voltage generator in the augmentation circuit. This resonant behavior may be exploited to increase armature kinetic energy. Alternatively, if the presence of the kinetic energy resonance is not taken into account, parameters may be chosen that result in less than optimal kinetic energy and efficiency.

  19. ARC Code TI: ROC Curve Code Augmentation

    Data.gov (United States)

    National Aeronautics and Space Administration — ROC (Receiver Operating Characteristic) curve Code Augmentation was written by Rodney Martin and John Stutz at NASA Ames Research Center and is a modification of...

  20. Affordances in Mobile Augmented Reality Applications

    Directory of Open Access Journals (Sweden)

    Tor Gjøsæter

    2014-10-01

    Full Text Available This paper explores the affordances of augmented reality content in a mobile augmented reality application. A user study was conducted by performing a multi-camera video recording of seven think aloud sessions. The think aloud sessions consisted of individual users performing tasks, exploring and experiencing a mobile augmented reality (MAR application we developed for the iOS platform named ARad. We discuss the instrumental affordances we observed when users interacted with augmented reality content, as well as more complex affordances rising from conventions from media content, AR and the traditional WIMP paradigm. We find that remediation of traditional newspaper content through the MAR medium can provide engaging, pleasing and exciting user experiences. However, the some of the content still suffers from being shoveled onto the MAR platform without adapting it properly. Finally, we discuss what content was most successfully mediated to the user and how the content impacts the user experience.

  1. Augmented Reality Simulations on Handheld Computers

    Science.gov (United States)

    Squire, Kurt; Klopfer, Eric

    2007-01-01

    Advancements in handheld computing, particularly its portability, social interactivity, context sensitivity, connectivity, and individuality, open new opportunities for immersive learning environments. This article articulates the pedagogical potential of augmented reality simulations in environmental engineering education by immersing students in…

  2. Intraoperative Endoscopic Augmented Reality in Third Ventriculostomy

    OpenAIRE

    Ciucci, Matteo

    2009-01-01

    In neurosurgery, as a result of the brain-shift, the preoperative patient models used as a intraoperative reference change. A meaningful use of the preoperative virtual models during the operation requires for a model update. The NEAR project, Neuroendoscopy towards Augmented Reality, describes a new camera calibration model for high distorted lenses and introduces the concept of active endoscopes endowed with with navigation, camera calibration, augmented reality and triangulation modules.

  3. Augmenting SCORM Manifests with Adaptive Links

    OpenAIRE

    Abdullah, NA; Bailey, CP; Davis, HC

    2004-01-01

    This paper describes an experiment to augment SCORM manifests with adaptive links using AuldLinky in order to promote content reusability, interoperability and personalized e-learning. Our technique involves the automatic deduction of a concept map from a manifest and the transformation of its pertinent elements into FOHM (Fundamental Object Hypermedia Model) objects before augmenting the information with complimentary and adaptive links using AuldLinky.

  4. Muzzle shunt augmentation of conventional railguns

    Energy Technology Data Exchange (ETDEWEB)

    Parker, J.V.

    1990-01-01

    Augmentation is a well-known technique for reducing the armature current and hence the armature power dissipation in a plasma armature railgun. In spite of the advantages, no large augmented railguns have been built, primarily due to the mechanical and electrical complexity introduce by the extra conductors required. It is possible to achieve some of the benefits of augmentation in conventional railgun by diverting a fraction {phi} of the input current through a shunt path at the muzzle of the railgun. In particular, the relation between force and armature current is the same as that obtained in an n-turn, series connected augmented railgun with n = 1/(1-{phi}). The price of this simplification is a reduction in electrical efficiency and some additional complexity in the external electrical system. Additions to the electrical system are required to establish the shunt current and to control its magnitude during projectile acceleration. The relationship between muzzle shunt augmentation and conventional series augmentation is developed and various techniques is developed and various techniques for establishing and controlling the shunt current are illustrated with a practical example. 5 refs., 8 figs., 2 tabs.

  5. Compaction and relaxation of biofilms

    KAUST Repository

    Valladares Linares, R.

    2015-06-18

    Operation of membrane systems for water treatment can be seriously hampered by biofouling. A better characterization of biofilms in membrane systems and their impact on membrane performance may help to develop effective biofouling control strategies. The objective of this study was to determine the occurrence, extent and timescale of biofilm compaction and relaxation (decompaction), caused by permeate flux variations. The impact of permeate flux changes on biofilm thickness, structure and stiffness was investigated in situ and non-destructively with optical coherence tomography using membrane fouling monitors operated at a constant crossflow velocity of 0.1 m s−1 with permeate production. The permeate flux was varied sequentially from 20 to 60 and back to 20 L m−2 h−1. The study showed that the average biofilm thickness on the membrane decreased after elevating the permeate flux from 20 to 60 L m−2 h−1 while the biofilm thickness increased again after restoring the original flux of 20 L m−2 h−1, indicating the occurrence of biofilm compaction and relaxation. Within a few seconds after the flux change, the biofilm thickness was changed and stabilized, biofilm compaction occurred faster than the relaxation after restoring the original permeate flux. The initial biofilm parameters were not fully reinstated: the biofilm thickness was reduced by 21%, biofilm stiffness had increased and the hydraulic biofilm resistance was elevated by 16%. Biofilm thickness was related to the hydraulic biofilm resistance. Membrane performance losses are related to the biofilm thickness, density and morphology, which are influenced by (variations in) hydraulic conditions. A (temporarily) permeate flux increase caused biofilm compaction, together with membrane performance losses. The impact of biofilms on membrane performance can be influenced (increased and reduced) by operational parameters. The article shows that a (temporary) pressure increase leads to more

  6. Augmenting digital displays with computation

    Science.gov (United States)

    Liu, Jing

    As we inevitably step deeper and deeper into a world connected via the Internet, more and more information will be exchanged digitally. Displays are the interface between digital information and each individual. Naturally, one fundamental goal of displays is to reproduce information as realistically as possible since humans still care a lot about what happens in the real world. Human eyes are the receiving end of such information exchange; therefore it is impossible to study displays without studying the human visual system. In fact, the design of displays is rather closely coupled with what human eyes are capable of perceiving. For example, we are less interested in building displays that emit light in the invisible spectrum. This dissertation explores how we can augment displays with computation, which takes both display hardware and the human visual system into consideration. Four novel projects on display technologies are included in this dissertation: First, we propose a software-based approach to driving multiview autostereoscopic displays. Our display algorithm can dynamically assign views to hardware display zones based on multiple observers' current head positions, substantially reducing crosstalk and stereo inversion. Second, we present a dense projector array that creates a seamless 3D viewing experience for multiple viewers. We smoothly interpolate the set of viewer heights and distances on a per-vertex basis across the arrays field of view, reducing image distortion, crosstalk, and artifacts from tracking errors. Third, we propose a method for high dynamic range display calibration that takes into account the variation of the chrominance error over luminance. We propose a data structure for enabling efficient representation and querying of the calibration function, which also allows user-guided balancing between memory consumption and the amount of computation. Fourth, we present user studies that demonstrate that the ˜ 60 Hz critical flicker fusion

  7. Relaxation in finite fermion systems

    International Nuclear Information System (INIS)

    The derivation of a collision term extending time-dependent mean-field theories to describe the equilibration in finite fermion systems due to the residual interaction is discussed. Numerical results based on a relaxation ansatz for the collision term exhibit its qualitative effect. The equation for the time-dependent occupation numbers of the s.p. orbits is reduced to a non-linear partial differential equation which is solved analytically. In the equilibrium limit, a Fermi-type distribution for the occupation numbers is attained

  8. Augmented Reality for the Improvement of Remote Laboratories: An Augmented Remote Laboratory

    Science.gov (United States)

    Andujar, J. M.; Mejias, A.; Marquez, M. A.

    2011-01-01

    Augmented reality (AR) provides huge opportunities for online teaching in science and engineering, as these disciplines place emphasis on practical training and unsuited to completely nonclassroom training. This paper proposes a new concept in virtual and remote laboratories: the augmented remote laboratory (ARL). ARL is being tested in the first…

  9. ARSC: Augmented Reality Student Card--An Augmented Reality Solution for the Education Field

    Science.gov (United States)

    El Sayed, Neven A. M.; Zayed, Hala H.; Sharawy, Mohamed I.

    2011-01-01

    Augmented Reality (AR) is the technology of adding virtual objects to real scenes through enabling the addition of missing information in real life. As the lack of resources is a problem that can be solved through AR, this paper presents and explains the usage of AR technology we introduce Augmented Reality Student Card (ARSC) as an application of…

  10. Prototype of an Augmented Reality User Manual App

    OpenAIRE

    Palm, Fredrik; Källström, Filip

    2014-01-01

    This thesis describes how augmented reality can be used when developing an instructional application. After studying augmented reality apps and papers, a prototype for mobile devices was developed to discover the possibilities that augmented reality offers and show how issues inherent to the technology can be solved. The app was developed with usability in mind, with consideration for how well suited each feature was for augmented reality. Our results show that it is possible to use augmented...

  11. Endogenous endothelium-derived relaxing factor opposes hypoxic pulmonary vasoconstriction and supports blood flow to hypoxic alveoli in anesthetized rabbits.

    OpenAIRE

    Sprague, R. S.; Thiemermann, C; Vane, J R

    1992-01-01

    Agents that inhibit nitric oxide synthesis augment hypoxic pulmonary vasoconstriction. In an animal model of unilateral alveolar hypoxia, we investigated the hypothesis that endogenous endothelium-derived relaxing factor/nitric oxide opposes hypoxic pulmonary vasoconstriction and supports blood flow to hypoxic alveoli, resulting in a reduction in arterial oxygen tension (PO2). In pentobarbital-anesthetized rabbits, unilateral alveolar hypoxia was produced by ventilation of one lung with 100% ...

  12. Augment-type two stage accelerator

    International Nuclear Information System (INIS)

    When a flying body accelerated by a gas gun at a first stage enters into an augment rail passing through an introduction tube, an ignition capacitor for initial plasmas is turned ON to apply a voltage between the augment rails. Subsequently, the accelerating gas present behind the flying body is formed into plasmas by a laser, to flow electric current from one of the inner augment rails → plasma armature → the other of the inner augment rails, and additionally accelerate the flying body by Lorentz force formed in this case. Since the plasmas are maintained in a state of higher density than the plasmas obtained by using all of the augment rails, the ignition capacitor for initial plasmas in switched to a power source. As a result, it is possible to flow the maximum current before the plasmas expand, and a large accelerating force and a high magnetic flux density are attained, to improve acceleration performance of the flying body. (N.H.)

  13. Irradiated homologous costal cartilage for augmentation rhinoplasty

    Energy Technology Data Exchange (ETDEWEB)

    Lefkovits, G. (Lenox Hill Hospital, New York, NY (USA))

    1990-10-01

    Although the ideal reconstructive material for augmentation rhinoplasty continues to challenge plastic surgeons, there exists no report in the literature that confines the use of irradiated homologous costal cartilage, first reported by Dingman and Grabb in 1961, to dorsal nasal augmentation. The purpose of this paper is to present a retrospective analysis of the author's experience using irradiated homologous costal cartilage in augmentation rhinoplasty. Twenty-seven dorsal nasal augmentations were performed in 24 patients between 16 and 49 years of age with a follow-up ranging from 1 to 27 months. Good-to-excellent results were achieved in 83.3% (20 of 24). Poor results requiring revision were found in 16.7% (4 of 24). Complication rates included 7.4% infection (2 of 27) and 14.8% warping (4 of 27). The resorption rate was zero. These results compare favorably with other forms of nasal augmentation. Advantages and disadvantages of irradiated homologous costal cartilage are discussed.

  14. The transareolar incision for breast augmentation revisited.

    Science.gov (United States)

    Kompatscher, Peter; Schuler, Christine; Beer, Gertrude M

    2004-01-01

    Of the various possible incisions for breast augmentation, the transareolar access has gained only limited popularity. The potential side effects of this incision are said to be altered nipple sensation, impaired lactation, an increased rate of infections with capsular fibrosis, well visible scar formation with hypopigmentation, and the need for an additional access in case a breast ptosis correction should prove necessary at a later date. The purpose of this retrospective study was to judge advantages and limitations of transareolar breast augmentation, and to verify whether the reluctant attitude toward this surgical approach is justified. A sample of 18 patients with a transareolar, retropectoral breast augmentation was selected for a retrospective evaluation. The suitability of the technique in general was examined together with early postoperative complications, sensory changes, and late complications on the basis of an evaluation system for cosmetic surgical results. The study showed that only women with an areolar diameter of 3.5 cm or more without pronounced breast ptosis were suitable for the transareolar access. No early infections were noted. The rate of capsular fibrosis was 11%. Two years after breast augmentation, 16 women (89%) judged their breast sensation to be normal, but objective assessment showed that mean pressure and vibration sensation were moderately compromised in all parts of the breast. The scars were of good quality, with very little hypopigmentation. With appropriate patient selection, respecting the advantages and limitations, the transareolar incision has its definite place among the different incisions for breast augmentation. PMID:15164231

  15. Technological patterns of preventive relaxation of workings

    Energy Technology Data Exchange (ETDEWEB)

    Kaufman, L.L.; Bakhtin, A.F.; Zel' vyanskii, M.Sh. (Donetskaya Proektnaya Kontora (USSR))

    1991-09-01

    Presents stress relaxation patterns of workings. The patterns are used at horizon layouts and panel development of mine-take in stone inclines, boundary entries, mine drainage galleries and main galleries. The stress relaxation variants are: stress relaxing longwalls with complete mining with two or three winning galleries, longwalls worked by long pillars on the strike, and longwalls worked with advance mining on the strike. The individual variants differ by the ventilation system adopted.

  16. Internal magnetic relaxation in levitation superconductors

    CERN Document Server

    Smolyak, B M; Ermakov, G V

    2001-01-01

    Effect of arresting levitation relaxation, appearing during reverse magnetization of YBaCuO superconducting ceramics, was detected. At bipolar magnetization magnetic moment of a sample remains invariable. Internal magnetic relaxation occurs, in the course of which magnetic flux is redistributed inside the sample. As a result the state of filed at the sample boundary does not change and full force acting on the system of closed currents remains constant. A formula for calculating the time of internal relaxation is provided

  17. Exploiting Semidefinite Relaxations in Constraint Programming

    OpenAIRE

    van Hoeve, Willem Jan

    2004-01-01

    Constraint programming uses enumeration and search tree pruning to solve combinatorial optimization problems. In order to speed up this solution process, we investigate the use of semidefinite relaxations within constraint programming. In principle, we use the solution of a semidefinite relaxation to guide the traversal of the search tree, using a limited discrepancy search strategy. Furthermore, a semidefinite relaxation produces a bound for the solution value, which is used to prune parts o...

  18. Motional Spin Relaxation in Large Electric Fields

    OpenAIRE

    Schmid, Riccardo; Plaster, B; Filippone, B.W.

    2008-01-01

    We discuss the precession of spin-polarized Ultra Cold Neutrons (UCN) and $^{3}$He atoms in uniform and static magnetic and electric fields and calculate the spin relaxation effects from motional $v\\times E$ magnetic fields. Particle motion in an electric field creates a motional $v\\times E$ magnetic field, which when combined with collisions, produces variations of the total magnetic field and results in spin relaxation of neutron and $^{3}$He samples. The spin relaxation times $T_{1}$ (long...

  19. Debye relaxation in high magnetic fields

    OpenAIRE

    Brooks, J. S.; Vasic, R.; Kismarahardja, A.; Steven, E.; Tokumoto, T.; Schlottmann, P.; Kelly, S.

    2008-01-01

    Dielectric relaxation is universal in characterizing polar liquids and solids, insulators, and semiconductors, and the theoretical models are well developed. However, in high magnetic fields, previously unknown aspects of dielectric relaxation can be revealed and exploited. Here, we report low temperature dielectric relaxation measurements in lightly doped silicon in high dc magnetic fields B both parallel and perpendicular to the applied ac electric field E. For B//E, we observe a temperatur...

  20. Dielectric Relaxation of Water: Theory and Experiment

    International Nuclear Information System (INIS)

    We have studied the hydrogen bond dynamics and methods for evaluation of probability and relaxation time for hydrogen bond network. Further, dielectric relaxation time has been calculated by using a diagonalization procedure by obtaining eigen values (inverse of relaxation time) of a master equation framed on the basis of Fokker-Planck equations. Microwave cavity spectrometer has been described to make measurements of relaxation time. Slater's perturbation equations are given for the analysis of the data. A comparison of theoretical and experimental data shows that there is a need for improvements in the theoretical model and experimental techniques to provide exact information about structural properties of water. (author)

  1. Relaxation and Visualization Strategies for Story Telling

    Institute of Scientific and Technical Information of China (English)

    冯灵林

    2012-01-01

    The importance of training students to tell or retell story is self - evident for mastering English language. The following activity introduces relaxation and visualization strategies for story telling.

  2. Temperature relaxation in dense plasma mixtures

    Science.gov (United States)

    Faussurier, Gérald; Blancard, Christophe

    2016-09-01

    We present a model to calculate temperature-relaxation rates in dense plasma mixtures. The electron-ion relaxation rates are calculated using an average-atom model and the ion-ion relaxation rates by the Landau-Spitzer approach. This method allows the study of the temperature relaxation in many-temperature electron-ion and ion-ion systems such as those encountered in inertial confinement fusion simulations. It is of interest for general nonequilibrium thermodynamics dealing with energy flows between various systems and should find broad use in present high energy density experiments.

  3. Relaxing Chosen-Ciphertext Security

    DEFF Research Database (Denmark)

    Canetti, Ran; Krawczyk, Hugo; Nielsen, Jesper Buus

    2003-01-01

    Security against adaptive chosen ciphertext attacks (or, CCA security) has been accepted as the standard requirement from encryption schemes that need to withstand active attacks. In particular, it is regarded as the appropriate security notion for encryption schemes used as components within...... general protocols and applications. Indeed, CCA security was shown to suffice in a large variety of contexts. However, CCA security often appears to be somewhat too strong: there exist encryption schemes (some of which come up naturally in practice) that are not CCA secure, but seem sufficiently secure...... “for most practical purposes.” We propose a relaxed variant of CCA security, called Replayable CCA (RCCA) security. RCCA security accepts as secure the non-CCA (yet arguably secure) schemes mentioned above; furthermore, it suffices for most existing applications of CCA security. We provide three...

  4. Handling Occlusions for Robust Augmented Reality Systems

    Directory of Open Access Journals (Sweden)

    Maidi Madjid

    2010-01-01

    Full Text Available Abstract In Augmented Reality applications, the human perception is enhanced with computer-generated graphics. These graphics must be exactly registered to real objects in the scene and this requires an effective Augmented Reality system to track the user's viewpoint. In this paper, a robust tracking algorithm based on coded fiducials is presented. Square targets are identified and pose parameters are computed using a hybrid approach based on a direct method combined with the Kalman filter. An important factor for providing a robust Augmented Reality system is the correct handling of targets occlusions by real scene elements. To overcome tracking failure due to occlusions, we extend our method using an optical flow approach to track visible points and maintain virtual graphics overlaying when targets are not identified. Our proposed real-time algorithm is tested with different camera viewpoints under various image conditions and shows to be accurate and robust.

  5. Resonance frequency analysis of implant stability in augmented and non-augmented sinus sites

    Directory of Open Access Journals (Sweden)

    Amir Moeintaghavi

    2015-12-01

    Full Text Available Background and aim:  Although there have been substantial developments in dental implant therapies, achieving good implant stability (ISQ >60 for implants inserted in augmented sinus sites appears to be challenging in comparison with non-augmented sites due to the high prevalence of bone resorption in posterior regions of maxilla. This study aimed to evaluate and compare the time required to achieve good implant stability between implants inserted in sites that had undergone a sinus augmentation procedure with implants inserted in non-augmented similar regions of maxilla. Methods: Thirty Stroman ITI Dental Implants were inserted in 14 patients (8 females and 6 males with average age of 55 ± 10 years. Fourteen implants were inserted in sinus augmented sites (open sinus elevation and Demineralized Freezed Bone Allograft  or DFDBA 6 months after healing (test group, and 16 implants were inserted into non-augmented  posterior areas of maxilla (control group. The implant stability quotient (ISQ for each implant was measured at the time of insertion (baseline, ISQ0 and at 1, 2 and 3 months later (ISQ1, ISQ2, ISQ3. Residual and augmented bone heights were also recorded. Results: The average residual bone height was 2.92 ± 0.63mm and 10.41 ± 1.46mm for the augmented bone height. The difference between ISQ values in the test and control groups was only significant at the baseline (p=0.023. No significant correlation was found between ISQ and bone height (residual and augmented, and there was no significant correlation between ISQ values and the implant diameter and length. In the test group, the differences between ISQ0 and ISQ1, ISQ1 and ISQ3 and ISQ2 and ISQ3 were all statistically significant (p=0.006, p=0.032, p=0.046. In the control group, the difference was only significant between ISQ0 and ISQ1 (p=0.002. Conclusion:  ISQ values were not statistically significant between implants inserted in natural and augmented bone six months after sinus

  6. Medical imaging and augmented reality. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Dohi, Takeyoshi [Tokyo Univ. (Japan). Dept. of Mechano-Informatics; Sakuma, Ichiro [Tokyo Univ. (Japan). Dept. of Precision Engineering; Liao, Hongen (eds.) [Tokyo Univ. (Japan). Dept. of Bioengineering

    2008-07-01

    This book constitutes the refereed proceedings of the 4th International Workshop on Medical Imaging and Augmented Reality, MIAR 2008, held in Tokyo, Japan, in August 2008. The 44 revised full papers presented together with 3 invited papers were carefully reviewed and selected from 90 submissions. The papers are organized in topical sections on surgical planning and simulation, medical image computing, image analysis, shape modeling and morphometry, image-guided robotics, image-guided intervention, interventional imaging, image registration, augmented reality, and image segmentation. (orig.)

  7. Flap-augmented shrouds for aerogenerators

    Science.gov (United States)

    Seginer, A.

    1976-01-01

    Axisymmetrical shrouds for windmills are augmented by ring-shaped 'flaps' and their performance is studied experimentally. The concept of the shroud as an annular 'wing' is justified, leading to the conclusion that high-lift techniques should be used in shroud design, and that high-lift devices, such as flaps, would increase the power output of the windmill. It is shown experimentally that the ideal power output of a flap-augmented shrouded turbine can be more than 4 times the power of unshrouded turbines of the same diameter.

  8. Minimal inframammary incision for breast augmentation

    Science.gov (United States)

    Fanous, Nabil; Tawilé, Caroline; Brousseau, Valérie J

    2008-01-01

    The inframammary approach in breast augmentation, still the most popular technique among plastic surgeons, has always been hampered by the undesirable appearance of its scar. The present paper describes a modified approach to inframammary augmentation with saline-filled prostheses. This approach uses a very short incision, thus resulting in a much less noticeable scar. The surgical technique is easy to learn, simple to execute, does not necessitate any special equipment and gives consistent results. Decreasing the scar length to an absolute minimum ensures higher patient and surgeon satisfaction. PMID:19554159

  9. Augmented Reality -tuki paikannukseen perustuvaan palveluun

    OpenAIRE

    Hautamäki, Jaakko

    2013-01-01

    Työn aiheena oli kehittää paikannukseen perustuva Augmented Reality sovellus Android-käyttöjärjestelmälle. Käyttäjä opastetaan lisättyä todellisuutta apuna käyttäen perille valituille kohteille. Sovellus tulee toimimaan osana toimeksiantajan kehittämää mobiiliohjelmistoa. Augmented Reality eli lisätty todellisuus yhdistää todellisen ja virtuaalisen ympäristön interaktiiviseksi kokemukseksi. Lisättyä todellisuutta tarkastellaan työssä lähinnä sovelluskehittäjän, mobiilisovellusten ja oman ...

  10. Towards Wearable Gaze Supported Augmented Cognition

    DEFF Research Database (Denmark)

    Toshiaki Kurauchi, Andrew; Hitoshi Morimoto, Carlos; Mardanbeigi, Diako;

    Augmented cognition applications must deal with the problem of how to exhibit information in an orderly, understandable, and timely fashion. Though context have been suggested to control the kind, amount, and timing of the information delivered, we argue that gaze can be a fundamental tool...... by the wearable computing community to develop a gaze supported augmented cognition application with three interaction modes. The application provides information of the person being looked at. The continuous mode updates information every time the user looks at a different face. The key activated discrete mode...

  11. An Augmented Reality Application for Art Exhibitions

    OpenAIRE

    Rodríguez Calatayud, María Nuria; Linares-Pellicer, Jordi; Heras Evangelio, David

    2015-01-01

    The exhibition Think with Your Hands offers a new way to look at illustrations and sketchbooks. It breaks the mould of a traditional show, thanks to an augmented reality project developed by UNIT experimental at Universitat Politècnica de València. This project centres on the work of Pep Carrió and Isidro Ferrer, two of Spain s most prestigious graphic designers, whose sketchbooks, objects and collages come to life when interacting with the mobile devices and augmented reality. Rodrígu...

  12. Stress Relaxation in Entangled Polymer Melts

    DEFF Research Database (Denmark)

    Hou, Ji-Xuan; Svaneborg, Carsten; Everaers, Ralf;

    2010-01-01

    We present an extensive set of simulation results for the stress relaxation in equilibrium and step-strained bead-spring polymer melts. The data allow us to explore the chain dynamics and the shear relaxation modulus, G(t), into the plateau regime for chains with Z=40 entanglements and into the t...

  13. Superparamagnetic relaxation in alpha-Fe particles

    DEFF Research Database (Denmark)

    Bødker, Franz; Mørup, Steen; Pedersen, Michael Stanley;

    1998-01-01

    The superparamagnetic relaxation time of carbon-supported alpha-Fe particles with an average size of 3.0 Mm has been studied over a large temperature range by the use of Mossbauer spectroscopy combined with AC and DC magnetization measurements. It is found that the relaxation time varies...

  14. Nuclear magnetic resonance relaxation in multiple sclerosis

    DEFF Research Database (Denmark)

    Larsson, H B; Barker, G J; MacKay, A

    1998-01-01

    OBJECTIVES: The theory of relaxation processes and their measurements are described. An overview is presented of the literature on relaxation time measurements in the normal and the developing brain, in experimental diseases in animals, and in patients with multiple sclerosis. RESULTS AND CONCLUS...

  15. Relaxation-limited evaporation of globular clusters

    CERN Document Server

    van Putten, Maurice H P M

    2011-01-01

    Evaporative evolution of stellar clusters is shown to be relaxation limited when the number of stars satisfies $N>>N_c$, where $N_c\\simeq 1600$. For a Maxwell velocity distribution that extends beyond the escape velocity, this process is {\\em bright} in that the Kelvin-Helmholtz time scale, $f_H^{-1}t_{relax}$, is shorter than the Ambartsumian-Spitzer time scale, $f_N^{-1}t_{relax}$, where $f_H>f_N$ denote the fractional changes in total energy and number of stars per relaxation time, $t_{relax}$. The resulting evaporative lifetime $t_{ev}\\simeq 20.5 t_{relax}$ for isolated clusters is consistent with Fokker-Planck and N-body simulations, where $t_{relax}$ is expressed in terms of the half-mass radius. We calculate the grey body factor by averaging over the anisotropic perturbation of the potential barrier across the tidal sphere, and derive the tidal sensitivity ${d\\ln t_{ev}}/{dy}\\simeq -1.9$ to -0.7 as a function of the ratio $y$ of the virial-to-tidal radius. Relaxation limited evaporation applies to the ...

  16. Analysis of sawtooth relaxation oscillations in tokamaks

    International Nuclear Information System (INIS)

    Sawtooth relaxation oscillations are analyzed using the Kadomtsev's disruption model and a thermal relaxation model. The sawtooth period is found to be very sensitive to the thermal conduction loss. Qualitative agreement between these calculations and the sawtooth period observed in several tokamaks is demonstrated

  17. Windowing Waveform Relaxation of Initial Value Problems

    Institute of Scientific and Technical Information of China (English)

    Yao-lin Jiang

    2006-01-01

    We present a windowing technique of waveform relaxation for dynamic systems. An effective estimation on window length is derived by an iterative error expression provided here. Relaxation processes can be speeded up if one takes the windowing technique in advance. Numerical experiments are given to further illustrate the theoretical analysis.

  18. Superparamagnetic relaxation of weakly interacting particles

    DEFF Research Database (Denmark)

    Mørup, Steen; Tronc, Elisabeth

    1994-01-01

    The influence of particle interactions on the superparamagnetic relaxation time has been studied by Mossbauer spectroscopy in samples of maghemite (gamma-Fe2O3) particles with different particle sizes and particle separations. It is found that the relaxation time decreases with decreasing particl...

  19. Enthalpy relaxation and annealing effect in polystyrene.

    Science.gov (United States)

    Sakatsuji, Waki; Konishi, Takashi; Miyamoto, Yoshihisa

    2013-07-01

    The effects of thermal history on the enthalpy relaxation in polystyrene are studied by differential scanning calorimetry. The temperature dependence of the specific heat in the liquid and the glassy states, that of relaxation time, and the exponent of the Kohlrausch-Williams-Watts function are determined by measurements of the thermal response against sinusoidal temperature variation. A phenomenological model equation previously proposed to interpret the memory effect in the frozen state is applied to the enthalpy relaxation and the evolution of entropy under a given thermal history is calculated. The annealing below the glass transition temperature produces two effects on enthalpy relaxation: the decay of excess entropy with annealing time in the early stage of annealing and the increase in relaxation time due to physical aging in the later stage. The crossover of these effects is reflected in the variation of temperature of the maximum specific heat observed in the heating process after annealing and cooling.

  20. Anomalous enthalpy relaxation in vitreous silica

    DEFF Research Database (Denmark)

    Yue, Yuanzheng

    2015-01-01

    scans. It is known that the liquid fragility (i.e., the speed of the viscous slow-down of a supercooled liquid at its Tg during cooling) has impact on enthalpy relaxation in glass. Here, we find that vitreous silica (as a strong system) exhibits striking anomalies in both glass transition and enthalpy...... relaxation compared to fragile oxide systems. The anomalous enthalpy relaxation of vitreous silica is discovered by performing the hyperquenching-annealing-calorimetry experiments. We argue that the strong systems like vitreous silica and vitreous Germania relax in a structurally cooperative manner, whereas...... the fragile ones do in a structurally independent fashion. We discuss the origin of the anomalous enthalpy relaxation in the HQ vitreous silica....

  1. Augmenting the ADDIE Paradigm for Instructional Design

    Science.gov (United States)

    Ni, Xiaopeng; Branch, Robert Maribe

    2008-01-01

    The authors discuss topics appropriate for augmenting the ADDIE paradigm for instructional design. The topics selected are based on data from a study of working professionals who successfully completed an instructional design and technology certificate program and who identified related topics that they regarded as beneficial. The participants…

  2. Personalized augmented reality for anatomy education.

    Science.gov (United States)

    Ma, Meng; Fallavollita, Pascal; Seelbach, Ina; Von Der Heide, Anna Maria; Euler, Ekkehard; Waschke, Jens; Navab, Nassir

    2016-05-01

    Anatomy education is a challenging but vital element in forming future medical professionals. In this work, a personalized and interactive augmented reality system is developed to facilitate education. This system behaves as a "magic mirror" which allows personalized in-situ visualization of anatomy on the user's body. Real-time volume visualization of a CT dataset creates the illusion that the user can look inside their body. The system comprises a RGB-D sensor as a real-time tracking device to detect the user moving in front of a display. In addition, the magic mirror system shows text information, medical images, and 3D models of organs that the user can interact with. Through the participation of 7 clinicians and 72 students, two user studies were designed to respectively assess the precision and acceptability of the magic mirror system for education. The results of the first study demonstrated that the average precision of the augmented reality overlay on the user body was 0.96 cm, while the results of the second study indicate 86.1% approval for the educational value of the magic mirror, and 91.7% approval for the augmented reality capability of displaying organs in three dimensions. The usefulness of this unique type of personalized augmented reality technology has been demonstrated in this paper. PMID:26646315

  3. Mobile-based tourism as spatial augmentation

    DEFF Research Database (Denmark)

    Sandvik, Kjetil

    By discussing the uses of mobile information mainly for tourism purposes, I argue that the consequence of the use of mobile technologies is neither a collapse nor a doubling of space and place. Rather they are producing new types of places and new types of spatial experiences. In short, mobile...... technologies facilitate an augmentation of space...

  4. Personalized augmented reality for anatomy education.

    Science.gov (United States)

    Ma, Meng; Fallavollita, Pascal; Seelbach, Ina; Von Der Heide, Anna Maria; Euler, Ekkehard; Waschke, Jens; Navab, Nassir

    2016-05-01

    Anatomy education is a challenging but vital element in forming future medical professionals. In this work, a personalized and interactive augmented reality system is developed to facilitate education. This system behaves as a "magic mirror" which allows personalized in-situ visualization of anatomy on the user's body. Real-time volume visualization of a CT dataset creates the illusion that the user can look inside their body. The system comprises a RGB-D sensor as a real-time tracking device to detect the user moving in front of a display. In addition, the magic mirror system shows text information, medical images, and 3D models of organs that the user can interact with. Through the participation of 7 clinicians and 72 students, two user studies were designed to respectively assess the precision and acceptability of the magic mirror system for education. The results of the first study demonstrated that the average precision of the augmented reality overlay on the user body was 0.96 cm, while the results of the second study indicate 86.1% approval for the educational value of the magic mirror, and 91.7% approval for the augmented reality capability of displaying organs in three dimensions. The usefulness of this unique type of personalized augmented reality technology has been demonstrated in this paper.

  5. Location-Based Learning through Augmented Reality

    Science.gov (United States)

    Chou, Te-Lien; Chanlin, Lih-Juan

    2014-01-01

    A context-aware and mixed-reality exploring tool cannot only effectively provide an information-rich environment to users, but also allows them to quickly utilize useful resources and enhance environment awareness. This study integrates Augmented Reality (AR) technology into smartphones to create a stimulating learning experience at a university…

  6. Intelligent Augmented Reality Training for Motherboard Assembly

    Science.gov (United States)

    Westerfield, Giles; Mitrovic, Antonija; Billinghurst, Mark

    2015-01-01

    We investigate the combination of Augmented Reality (AR) with Intelligent Tutoring Systems (ITS) to assist with training for manual assembly tasks. Our approach combines AR graphics with adaptive guidance from the ITS to provide a more effective learning experience. We have developed a modular software framework for intelligent AR training…

  7. Design Principles for Augmented Reality Learning

    Science.gov (United States)

    Dunleavy, Matt

    2014-01-01

    Augmented reality is an emerging technology that utilizes mobile, context-aware devices (e.g., smartphones, tablets) that enable participants to interact with digital information embedded within the physical environment. This overview of design principles focuses on specific strategies that instructional designers can use to develop AR learning…

  8. Augmented reality for Android application development

    CERN Document Server

    Grubert, Jens

    2013-01-01

    A step-by-step tutorial-based guide aimed at giving you hands-on practical experience to develop AR applications for Android.Augmented Reality for Android Application Development is for Android mobile application developers who are familiar with Android Development Tools and deployment, JMonkeyEngine, and the Vuforia SDK.

  9. Get Real: Augmented Reality for the Classroom

    Science.gov (United States)

    Mitchell, Rebecca; DeBay, Dennis

    2012-01-01

    Kids love augmented reality (AR) simulations because they are like real-life video games. AR simulations allow students to learn content while collaborating face to face and interacting with a multimedia-enhanced version of the world around them. Although the technology may seem advanced, AR software makes it easy to develop content-based…

  10. CARE: Creating Augmented Reality in Education

    Science.gov (United States)

    Latif, Farzana

    2012-01-01

    This paper explores how Augmented Reality using mobile phones can enhance teaching and learning in education. It specifically examines its application in two cases, where it is identified that the agility of mobile devices and the ability to overlay context specific resources offers opportunities to enhance learning that would not otherwise exist.…

  11. Augmentation of board games using smartphones

    DEFF Research Database (Denmark)

    Kulsinskas, Arturas; Balan, Catalin; Egede Bukdahl, Nicholas;

    2015-01-01

    This paper contains details about research into the effect of digital augmentation on social presence in board games. A case study of the board game Tobago was performed during the project and a prototype application for smartphones was developed in order to compare the players’ social presence i...

  12. MULTILEVEL AUGMENTATION METHODS FOR SOLVING OPERATOR EQUATIONS

    Institute of Scientific and Technical Information of China (English)

    Chen Zhongying; Wu Bin; Xu Yuesheng

    2005-01-01

    We introduce multilevel augmentation methods for solving operator equations based on direct sum decompositions of the range space of the operator and the solution space of the operator equation and a matrix splitting scheme. We establish a general setting for the analysis of these methods, showing that the methods yield approximate solutions of the same convergence order as the best approximation from the subspace. These augmentation methods allow us to develop fast, accurate and stable nonconventional numerical algorithms for solving operator equations. In particular, for second kind equations, special splitting techniques are proposed to develop such algorithms. These algorithms are then applied to solve the linear systems resulting from matrix compression schemes using wavelet-like functions for solving Fredholm integral equations of the second kind. For this special case, a complete analysis for computational complexity and convergence order is presented. Numerical examples are included to demonstrate the efficiency and accuracy of the methods. In these examples we use the proposed augmentation method to solve large scale linear systems resulting from the recently developed wavelet Galerkin methods and fast collocation methods applied to integral equations of the secondkind. Our numerical results confirm that this augmentation method is particularly efficient for solving large scale linear systems induced from wavelet compression schemes.

  13. Temporal Coherence Strategies for Augmented Reality Labeling

    DEFF Research Database (Denmark)

    Madsen, Jacob Boesen; Tatzgern, Markus; Madsen, Claus B.;

    2016-01-01

    Temporal coherence of annotations is an important factor in augmented reality user interfaces and for information visualization. In this paper, we empirically evaluate four different techniques for annotation. Based on these findings, we follow up with subjective evaluations in a second experiment...

  14. Introduction to augmented and virtual reality

    Science.gov (United States)

    Caudell, Thomas P.

    1995-12-01

    This paper introduces the field of augmented reality as a prolog to the body of papers in the remainder of this session. I describe the use of head-mounted display technologies to improve the efficiency and quality of human workers in their performance of engineering design, manufacturing, construction, testing, and maintenance activities. This technology is used to `augment' the visual field of the wearer with information necessary in the performance of the current task. The enabling technology is head-up (see-through) display head sets (HUDsets) combined with head position sensing, real world registration systems, and database access software. A primary difference between virtual reality (VR) and `augmented reality' (AR) is in the complexity of the perceived graphical objects. In AR systems, only simple wire frames, template outlines, designators, and text is displayed. An immediate result of this difference is that augmented reality systems can be driven by standard and inexpensive microprocessors. Many research issues must be addressed before this technology can be widely used, including tracking and registration, human 3D perception and reasoning, and human task performance issues.

  15. Aloqa and layar augmented reality feeds

    NARCIS (Netherlands)

    Ternier, Stefaan

    2010-01-01

    Aloqa is a service that proactively notifies the user of Point Of Interests (POIs). It runs on iPhone, blackberry and android. With this tool you can easily get directions to events, places, buildings or other places of interests. Layar builds on the same principle, but has a browser that augments t

  16. ARTree. Designing & evaluating handheld augmented reality art

    OpenAIRE

    Nordbø, Tone

    2011-01-01

    Augmented reality is a technology combining physical and virtual objects. This study aimes to explore the use of this technology in art. The prototype ARTree was developed through contributions from an artist, and consists of a physical tree and virtual objects representing the four seasons. A qualitative usability test was conducted where ...

  17. Effect of filler surface properties on stress relaxation behavior of carbon nanofiber/polyurethane nanocomposites

    Science.gov (United States)

    Sedat Gunes, I.; Jimenez, Guillermo; Jana, Sadhan

    2009-03-01

    The effect of carbon nanofiber (CNF) surface properties on tensile stress relaxation behavior of CNF/polyurethane (PU) nanocomposites was analyzed. PU was synthesized from methylene diisocyanate, polypropylene glycol (PPG diol), and butanediol. CNF, oxidized CNF (ox-CNF), and PPG diol grafted CNF (ol-CNF) were selected as fillers. ol-CNF was obtained by grafting PPG diol onto ox-CNF by reacting it with the carboxyl groups present on ox-CNF surface. The atomic ratios of oxygen to carbon present on the filler surfaces were 0.13 and 0.18 on ox-CNF and on ol-CNF as compared to 0.015 on CNF, mostly due to the presence oxygen containing polar groups on the surfaces of the former. The composites were prepared by in-situ polymerization and melt mixing in a chaotic mixer. The stress relaxation behavior of composites was determined at room temperature after inducing a tensile strain of 100%. The presence of fillers augmented the rate of stress relaxation in composites which was highest in the presence of CNF. The results suggested that relatively weak polymer-filler interactions in composites of CNF promoted higher stress relaxation.

  18. Motion in Augmented Reality Games: An Engine for Creating Plausible Physical Interactions in Augmented Reality Games

    OpenAIRE

    Brian Mac Namee; David Beaney; Qingqing Dong

    2010-01-01

    The next generation of Augmented Reality (AR) games will require real and virtual objects to coexist in motion in immersive game environments. This will require the illusion that real and virtual objects interact physically together in a plausible way. The Motion in Augmented Reality Games (MARG) engine described in this paper has been developed to allow these kinds of game environments. The paper describes the design and implementation of the MARG engine and presents two pr...

  19. 3D photography in the objective analysis of volume augmentation including fat augmentation and dermal fillers.

    Science.gov (United States)

    Meier, Jason D; Glasgold, Robert A; Glasgold, Mark J

    2011-11-01

    The authors present quantitative and objective 3D data from their studies showing long-term results with facial volume augmentation. The first study analyzes fat grafting of the midface and the second study presents augmentation of the tear trough with hyaluronic filler. Surgeons using 3D quantitative analysis can learn the duration of results and the optimal amount to inject, as well as showing patients results that are not demonstrable with standard, 2D photography. PMID:22004863

  20. The role of imaging in pediatric bladder augmentation

    Energy Technology Data Exchange (ETDEWEB)

    Breen, Micheal; Chow, Jeanne S. [Boston Children' s Hospital, Department of Radiology, Boston, MA (United States); Phelps, Andrew [UCSF Benioff Children' s Hospital San Francisco, Department of Radiology and Biomedical Imaging, San Francisco, CA (United States); Estrada, Carlos [Boston Children' s Hospital, Department of Urology, Boston, MA (United States)

    2015-09-15

    Bladder augmentation (also called augmentation cystoplasty) refers to a number of surgical methods that increase the capacity and compliance of the urinary bladder. Imaging has an important role in the postoperative evaluation of bladder augmentation. The most common augmentation procedures utilize enteric segments to augment the bladder. The various types of bladder augmentation have characteristic appearances on different imaging modalities. Spontaneous bladder perforation is a complication that is seen in both early and late post-operative periods and it is one of the most important complications for radiologists to be aware of as it is life-threatening. We review the indications for bladder augmentation in children, the surgical techniques employed, the normal postoperative appearances on imaging studies and the role of imaging complications of bladder augmentation including delayed spontaneous bladder rupture, which is life-threatening. (orig.)

  1. Vibrational and Rotational Energy Relaxation in Liquids

    DEFF Research Database (Denmark)

    Petersen, Jakob

    Vibrational and rotational energy relaxation in liquids are studied by means of computer simulations. As a precursor for studying vibrational energy relaxation of a solute molecule subsequent to the formation of a chemical bond, the validity of the classical Bersohn-Zewail model for describing the...... qualitative agreement is found in both cases. Furthermore, the rotational energy relaxation of H2O in liquid water is studied via simulations and a power-and-work analysis. The mechanism of the energy transfer from the rotationally excited H2O molecule to its water neighbors is elucidated, i.e. the energy...

  2. Relaxation time in disordered molecular systems

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Rodrigo P. [Departamento de Física, Universidade Federal de Santa Catarina, 88040-900 Florianópolis-SC (Brazil); Freire, José A., E-mail: jfreire@fisica.ufpr.br [Departamento de Física, Universidade Federal do Paraná, 81531-990 Curitiba-PR (Brazil)

    2015-05-28

    Relaxation time is the typical time it takes for a closed physical system to attain thermal equilibrium. The equilibrium is brought about by the action of a thermal reservoir inducing changes in the system micro-states. The relaxation time is intuitively expected to increase with system disorder. We derive a simple analytical expression for this dependence in the context of electronic equilibration in an amorphous molecular system model. We find that the disorder dramatically enhances the relaxation time but does not affect its independence of the nature of the initial state.

  3. Compact vs. Exponential-Size LP Relaxations

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.D.; Lancia, G.

    2000-09-01

    In this paper we introduce by means of examples a new technique for formulating compact (i.e. polynomial-size) LP relaxations in place of exponential-size models requiring separation algorithms. In the same vein as a celebrated theorem by Groetschel, Lovasz and Schrijver, we state the equivalence of compact separation and compact optimization. Among the examples used to illustrate our technique, we introduce a new formulation for the Traveling Salesman Problem, whose relaxation we show equivalent to the subtour elimination relaxation.

  4. Hydrogen sulfide and vascular relaxation

    Institute of Scientific and Technical Information of China (English)

    SUN Yan; TANG Chao-shu; DU Jun-bao; JIN Hong-fang

    2011-01-01

    Objective To review the vasorelaxant effects of hydrogen sulfide (H2S) in arterial rings in the cardiovascular system under both physiological and pathophysiological conditions and the possible mechanisms involved.Data sources The data in this review were obtained from Medline and Pubmed sources from 1997 to 2011 using the search terms "hydrogen sulfide" and ""vascular relaxation".Study selection Articles describing the role of hydrogen sulfide in the regulation of vascular activity and its vasorelaxant effects were selected.Results H2S plays an important role in the regulation of cardiovascular tone.The vasomodulatory effects of H2S depend on factors including concentration,species and tissue type.The H2S donor,sodium hydrosulfide (NarS),causes vasorelaxation of rat isolated aortic rings in a dose-dependent manner.This effect was more pronounced than that observed in pulmonary arterial rings.The expression of KATP channel proteins and mRNA in the aortic rings was increased compared with pulmonary artery rings.H2S is involved in the pathogenesis of a variety of cardiovascular diseases.Downregulation of the endogenous H2S pathway is an important factor in the pathogenesis of cardiovascular diseases.The vasorelaxant effects of H2S have been shown to be mediated by activation of KATP channels in vascular smooth muscle cells and via the induction of acidification due to activation of the CI/HCO3 exchanger.It is speculated that the mechanisms underlying the vasoconstrictive function of H2S in the aortic rings involves decreased NO production and inhibition of cAMP accumulation.Conclusion H2S is an important endogenous gasotransmitter in the cardiovascular system and acts as a modulator of vascular tone in the homeostatic regulation of blood pressure.

  5. Time resolved scattering relaxation mechanisms of microcavity polaritons

    OpenAIRE

    Chaves, F.; Rodriguez, F. J.

    2005-01-01

    We study the polariton relaxation dynamics for different scattering mechanisms as: Phonon and electron scattering procesess. The relaxation polariton is obtained at very short times by solving the Boltzman equation. Instead of the well-known relaxation process by phonons, we show that the bottleneck effect relaxes to the ground state more efficiently at low pump power intensity when the electron relaxation process is included. In this way, we clearly demonstrate that different relaxation time...

  6. Current concepts on complications associated with sinus augmentation procedures

    NARCIS (Netherlands)

    P. Boffano; T. Forouzanfar

    2014-01-01

    The sinus augmentation, or sinus lift procedure, is an internal augmentation of the maxillary sinus, which is intended to increase the vertical bony dimension in the lateral maxilla to make the placement of dental implants possible. Complication rate associated with maxillary sinus augmentation proc

  7. Augmented Reality and ARToolkit for Android: the First Steps

    Directory of Open Access Journals (Sweden)

    Demidova Liliya

    2016-01-01

    Full Text Available The paper describes the aspects of the augmented reality application development on the base of ARToolkit for Android. The steps consistently used for the augmented reality application development have been considered. The simplest Java-based examples of augmented reality have been discussed.

  8. “I think relax, relax and it flows a lot easier”: Exploring client-generated relax strategies

    Directory of Open Access Journals (Sweden)

    Dianne Cirone

    2014-10-01

    Full Text Available Background. Some adult stroke survivors participating in Cognitive Orientation to daily Occupational Performance (CO-OP treatment programs self-generated relax strategies that have not been explored in previous CO-OP publications. The objective of this study was to describe the process by which adults with stroke used relax strategies and to explore the outcomes associated with their use. Methods. Secondary analysis of transcripts of intervention sessions from five participants was conducted. Results. All five participants applied relax strategies after initially observing a breakdown in performance that was attributed to increased fatigue or tension. The relax strategies used by the participants during their occupations included general relaxation, physical modifications to reduce tension, mental preparation, and pacing. The application of these strategies seemed to result in improved skill performance, reduced fatigue, and transfer to other activities. Conclusion. The relax strategy warrants further investigation as a potentially important therapeutic tool to improve occupational performance in individuals who have had a stroke.

  9. Detonation wave augmentation of gas turbines

    Science.gov (United States)

    Wortman, A.

    1984-01-01

    The results of a feasibility study that examined the effects of using detonation waves to augment the performance of gas turbines are reported. The central ideas were to reduce compressor requirements and to maintain high performance in jet engines. Gasdynamic equations were used to model the flows associated with shock waves generated by the detonation of fuel in detonator tubes. Shock wave attenuation to the level of Mach waves was found possible, thus eliminating interference with the compressor and the necessity of valves and seals. A preliminary parametric study of the performance of a compressor working at a 4:1 ratio in a conceptual design of a detonation wave augmented jet engine in subsonic flight indicated a clear superiority over conventional designs in terms of fuel efficiency and thrust.

  10. Camera Based Navigation System with Augmented Reality

    Directory of Open Access Journals (Sweden)

    M. Marcu

    2012-06-01

    Full Text Available Nowadays smart mobile devices have enough processing power, memory, storage and always connected wireless communication bandwidth that makes them available for any type of application. Augmented reality (AR proposes a new type of applications that tries to enhance the real world by superimposing or combining virtual objects or computer generated information with it. In this paper we present a camera based navigation system with augmented reality integration. The proposed system aims to the following: the user points the camera of the smartphone towards a point of interest, like a building or any other place, and the application searches for relevant information about that specific place and superimposes the data over the video feed on the display. When the user moves the camera away, changing its orientation, the data changes as well, in real-time, with the proper information about the place that is now in the camera view.

  11. Averaged Extended Tree Augmented Naive Classifier

    Directory of Open Access Journals (Sweden)

    Aaron Meehan

    2015-07-01

    Full Text Available This work presents a new general purpose classifier named Averaged Extended Tree Augmented Naive Bayes (AETAN, which is based on combining the advantageous characteristics of Extended Tree Augmented Naive Bayes (ETAN and Averaged One-Dependence Estimator (AODE classifiers. We describe the main properties of the approach and algorithms for learning it, along with an analysis of its computational time complexity. Empirical results with numerous data sets indicate that the new approach is superior to ETAN and AODE in terms of both zero-one classification accuracy and log loss. It also compares favourably against weighted AODE and hidden Naive Bayes. The learning phase of the new approach is slower than that of its competitors, while the time complexity for the testing phase is similar. Such characteristics suggest that the new classifier is ideal in scenarios where online learning is not required.

  12. Interactive learning environments in augmented reality technology

    Directory of Open Access Journals (Sweden)

    Rafał Wojciechowski

    2010-01-01

    Full Text Available In this paper, the problem of creation of learning environments based on augmented reality (AR is considered. The concept of AR is presented as a tool for safe and cheap experimental learning. In AR learning environments students may acquire knowledge by personally carrying out experiments on virtual objects by manipulating real objects located in real environments. In the paper, a new approach to creation of interactive educational scenarios, called Augmented Reality Interactive Scenario Modeling (ARISM, is mentioned. In this approach, the process of building learning environments is divided into three stages, each of them performed by users with different technical and domain knowledge. The ARISM approach enables teachers who are not computer science experts to create AR learning environments adapted to the needs of their students.

  13. Vertebral Augmentation: State of the Art

    Science.gov (United States)

    Nabhane, Linda; Issa El Khoury, Fouad; Kreichati, Gaby; El Rachkidi, Rami

    2016-01-01

    Osteoporotic vertebral compression fractures (OVF) are an increasing public health problem. Cement augmentation (vertebroplasty of kyphoplasty) helps stabilize painful OVF refractory to medical treatment. This stabilization is thought to improve pain and functional outcome. Vertebroplasty consists of injecting cement into a fractured vertebra using a percutaneous transpedicular approach. Balloon kyphoplasty uses an inflatable balloon prior to injecting the cement. Although kyphoplasty is associated with significant improvement of local kyphosis and less cement leakage, this does not result in long-term clinical and functional improvement. Moreover, vertebroplasty is favored by some due to the high cost of kyphoplasty. The injection of cement increases the stiffness of the fracture vertebrae. This can lead, in theory, to adjacent OVF. However, many studies found no increase of subsequent fracture when comparing medical treatment to cement augmentation. Kyphoplasty can have a protective effect due to restoration of sagittal balance. PMID:27114782

  14. Index matrices towards an augmented matrix calculus

    CERN Document Server

    Atanassov, Krassimir T

    2014-01-01

    This book presents the very concept of an index matrix and its related augmented matrix calculus in a comprehensive form. It mostly illustrates the exposition with examples related to the generalized nets and intuitionistic fuzzy sets which are examples of an extremely wide array of possible application areas. The present book contains the basic results of the author over index matrices and some of its open problems with the aim to stimulating more researchers to start working in this area.

  15. Augmentation Mammaplasty Using Implants: A Review

    Directory of Open Access Journals (Sweden)

    Susumu Takayanagi

    2012-09-01

    Full Text Available One of the techniques for augmentation mammaplasty is the procedure using implants. Eventhough this technique has been used for many years, there are still several controversial issuesto be discussed and overcome for patient safety. In this review article, capsular contracture,leak or rupture of the implants, possible systemic disease, relation with breast cancer, andrecent problems with Poly Implant Prothese implants are described and discussed.

  16. Soft tissue augmentation in dermatology - 2009 update

    Directory of Open Access Journals (Sweden)

    Michael H Gold

    2010-01-01

    Full Text Available The number of products available to dermatologists for soft tissue augmentation has grown significantly over the past several years in the US. This manuscript will review the various hyaluronic acid fillers and other Food and Drug Administration -approved products we are utilizing for our patients in the rejuvenation process. It is hoped that through this article clinicians will feel more comfortable using these products in their everyday practice of dermatology.

  17. Do transcriptional enhancers also augment DNA replication?

    OpenAIRE

    O'Connor, D T; Subramani, S

    1988-01-01

    Enhancers are DNA elements that augment transcription in cis, independent of distance and orientation. Evidence such as hormone dependent neoplastic cell growth and the stimulation of viral replication by sequences present in enhancers suggests that enhancers may also directly affect DNA replication. We tested this hypothesis in recombinant plasmids by asking whether sequences that stimulated DNA replication shared the properties of transcriptional enhancers. The homologous simian virus 40 (S...

  18. Alveolar ridge augmentation by osteoinduction in rats

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1990-01-01

    The purpose of this study was to evaluate bone substitutes for alveolar ridge augmentation by osteoinduction. Allogenic, demineralized, and lyophilized dentin and bone was tested for osteoinductive properties in order to establish an experimental model for further studies. Implantations were...... performed subperiosteally on the premaxilla and heterotopically in the abdominal muscles of rats. Light microscopic evaluations revealed that all allogenic, demineralized, and lyophilized dentin and bone implants induced new bone formation. No inflammatory or foreign body reactions were observed....

  19. The ligament augmentation device: an historical perspective.

    Science.gov (United States)

    Kumar, K; Maffulli, N

    1999-05-01

    Anterior cruciate ligament (ACL) injury is the most common ligament injury in the knee, and a significant number of patients may develop progressive instability and disability despite aggressive rehabilitation. Various materials have been used for its reconstruction. These include autografts, allografts, prosthetic ligaments, and synthetic augmentation of the biological tissue. The concept of ligament augmentation device (LAD) arose from the observation that biological grafts undergo a phase of degeneration and loss of strength before being incorporated. The LAD is meant to protect the biological graft during this vulnerable phase. However, it provokes an inflammatory reaction in the knee, and has been found to delay maturation of autogenous graft in humans. In experimental situations, the LAD has been found to share loads in a composite graft. It has also been found to be substantially stronger than the biological graft. However, in clinical situations no significant advantages have been observed with the use of LAD to augment patellar tendon or hamstring reconstruction of the chronic ACL-deficient knee or in the acute setting to augment repair of the torn ACL. There are very few reports of the use of LAD in reconstruction of the posterior cruciate ligament, and again these do not suggest any advantage in its use. Insertion of the LAD implies the introduction of a foreign material into the knee, has been associated with complications such as reactive synovitis and effusions, and may also be associated with an increased risk of infection. At present, there is no evidence that its routine use should be advocated in uncomplicated reconstructions of the ACL using biological grafts.

  20. Enhancing human cooperation with multimodal augmented reality

    OpenAIRE

    Mertes, Christian; Dierker, Angelika; Hermann, Thomas; Hanheide, Marc; Sagerer, Gerhard

    2009-01-01

    Humans naturally use an impressive variety of ways to communicate. In this work, we investigate the possibilities of complementing these natural communication channels with artificial ones. For this, augmented reality is used as a technique to add synthetic visual and auditory stimuli to people's perception. A system for the mutual display of the gaze direction of two interactants is presented and its acceptance is shown through a study. Finally, future possibilities of promoting this novel c...

  1. Designing Augmented Reality for the Classroom

    OpenAIRE

    Cuendet, Sébastien; Bonnard, Quentin; Do-Lenh, Son; Dillenbourg, Pierre

    2012-01-01

    Augmented reality (AR) has recently received a lot of attention in education. Multiple AR systems for learning have been developed and tested through empirical studies often conducted in lab settings. While lab studies can be insightful, they leave out the complexity of a classroom environment. We developed three AR learning environments that have been used in genuine classroom contexts, some of them being now part of classroom regular practices. These systems and the learning activities they...

  2. Autologous Fat Injection for Augmented Mammoplasty

    International Nuclear Information System (INIS)

    Autologous fat injection is one of the methods utilized for augmented mammoplasty methods. In this surgical procedure, the fat for transfer is obtained from the donor site of the patient's own body by liposuction and the fat is then injected into the breast. We report here cases of three patients who underwent autologous fat injection. Two of the patients had palpable masses that were present after surgery. The serial imaging findings and surgical method of autologous fat transfer are demonstrated

  3. Augmented Reality For Museum Artifacts Visualization

    OpenAIRE

    Edmund Ng Giap Weng; Behrang Parhizkar; Lina Chai Hsiao Ping; Arash Habibi Lashkari

    2011-01-01

    Recently, advances in computer graphics and interactive techniques have increased the visual quality and field of Augmented Reality (AR) applications. Research into indoor exhibition systems associated with the use of AR technologies is getting general. This project describes an AR based system for overlaying computer generated information on the real world where museum artifacts are digitized in this project and superimposed in real scene. Furthermore, this project also presents the informat...

  4. Autologous Fat Injection for Augmented Mammoplasty

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Eul Sik; Seo, Bo Kyoung; Yi, Ann; Cho, Kyu Ran [Korea University Ansan Hospital, Ansan (Korea, Republic of)

    2008-12-15

    Autologous fat injection is one of the methods utilized for augmented mammoplasty methods. In this surgical procedure, the fat for transfer is obtained from the donor site of the patient's own body by liposuction and the fat is then injected into the breast. We report here cases of three patients who underwent autologous fat injection. Two of the patients had palpable masses that were present after surgery. The serial imaging findings and surgical method of autologous fat transfer are demonstrated

  5. Augmented reality visualization for thoracoscopic spine surgery

    Science.gov (United States)

    Sauer, Frank; Vogt, Sebastian; Khamene, Ali; Heining, Sandro; Euler, Ekkehard; Schneberger, Marc; Zuerl, Konrad; Mutschler, Wolf

    2006-03-01

    We are developing an augmented reality (AR) image guidance system in which information derived from medical images is overlaid onto a video view of the patient. The centerpiece of the system is a head-mounted display custom fitted with two miniature color video cameras that capture the stereo view of the scene. Medical graphics is overlaid onto the video view and appears firmly anchored in the scene, without perceivable time lag or jitter. We have been testing the system for different clinical applications. In this paper we discuss minimally invasive thoracoscopic spine surgery as a promising new orthopedic application. In the standard approach, the thoracoscope - a rigid endoscope - provides visual feedback for the minimally invasive procedure of removing a damaged disc and fusing the two neighboring vertebrae. The navigation challenges are twofold. From a global perspective, the correct vertebrae on the spine have to be located with the inserted instruments. From a local perspective, the actual spine procedure has to be performed precisely. Visual feedback from the thoracoscope provides only limited support for both of these tasks. In the augmented reality approach, we give the surgeon additional anatomical context for the navigation. Before the surgery, we derive a model of the patient's anatomy from a CT scan, and during surgery we track the location of the surgical instruments in relation to patient and model. With this information, we can help the surgeon in both the global and local navigation, providing a global map and 3D information beyond the local 2D view of the thoracoscope. Augmented reality visualization is a particularly intuitive method of displaying this information to the surgeon. To adapt our augmented reality system to this application, we had to add an external optical tracking system, which works now in combination with our head-mounted tracking camera. The surgeon's feedback to the initial phantom experiments is very positive.

  6. Augment-and-Conquer Negative Binomial Processes

    OpenAIRE

    Zhou, Mingyuan; Carin, Lawrence

    2012-01-01

    By developing data augmentation methods unique to the negative binomial (NB) distribution, we unite seemingly disjoint count and mixture models under the NB process framework. We develop fundamental properties of the models and derive efficient Gibbs sampling inference. We show that the gamma-NB process can be reduced to the hierarchical Dirichlet process with normalization, highlighting its unique theoretical, structural and computational advantages. A variety of NB processes with distinct s...

  7. Emergent Gravity from an Augmented Variational Principle

    CERN Document Server

    Tuveri, Matteo; Ferraris, Marco

    2016-01-01

    A direct and non-trivial link between Padmanabhan's entropy used in emergent gravity and standard GR action is established. To do that, Augmented Variational Principles (AVP) will be used. We shall discuss how this link accounts for the details of the variation of Padmanabhan's action based on gravitational entropy. It will also clarify the role of the background metric and its non-dynamical role.

  8. Multimodal augmented reality to enhance human communication

    OpenAIRE

    Mertes, Christian

    2008-01-01

    Humans naturally use an impressive variety of ways to communicate. In this work, we will investigate the possibilities of complementing these natural communication channels with artificial ones. For this, augmented reality is used as a technique to add synthetic visual and auditory stimuli to people's perception. A system for the mutual display of the gaze direction of two interactants is presented and its acceptance is shown through a study. Finally, future possibilities of promoting this no...

  9. The ligament augmentation device: an historical perspective.

    Science.gov (United States)

    Kumar, K; Maffulli, N

    1999-05-01

    Anterior cruciate ligament (ACL) injury is the most common ligament injury in the knee, and a significant number of patients may develop progressive instability and disability despite aggressive rehabilitation. Various materials have been used for its reconstruction. These include autografts, allografts, prosthetic ligaments, and synthetic augmentation of the biological tissue. The concept of ligament augmentation device (LAD) arose from the observation that biological grafts undergo a phase of degeneration and loss of strength before being incorporated. The LAD is meant to protect the biological graft during this vulnerable phase. However, it provokes an inflammatory reaction in the knee, and has been found to delay maturation of autogenous graft in humans. In experimental situations, the LAD has been found to share loads in a composite graft. It has also been found to be substantially stronger than the biological graft. However, in clinical situations no significant advantages have been observed with the use of LAD to augment patellar tendon or hamstring reconstruction of the chronic ACL-deficient knee or in the acute setting to augment repair of the torn ACL. There are very few reports of the use of LAD in reconstruction of the posterior cruciate ligament, and again these do not suggest any advantage in its use. Insertion of the LAD implies the introduction of a foreign material into the knee, has been associated with complications such as reactive synovitis and effusions, and may also be associated with an increased risk of infection. At present, there is no evidence that its routine use should be advocated in uncomplicated reconstructions of the ACL using biological grafts. PMID:10355719

  10. Stress Relaxation in Entangled Polymer Melts

    DEFF Research Database (Denmark)

    Hou, Ji-Xuan; Svaneborg, Carsten; Everaers, Ralf;

    2010-01-01

    We present an extensive set of simulation results for the stress relaxation in equilibrium and step-strained bead-spring polymer melts. The data allow us to explore the chain dynamics and the shear relaxation modulus, G(t), into the plateau regime for chains with Z=40 entanglements and into the t......We present an extensive set of simulation results for the stress relaxation in equilibrium and step-strained bead-spring polymer melts. The data allow us to explore the chain dynamics and the shear relaxation modulus, G(t), into the plateau regime for chains with Z=40 entanglements...... excellent agreement for the Likhtman-McLeish theory using the double reptation approximation for constraint release, if we remove the contribution of high-frequency modes to contour length fluctuations of the primitive chain....

  11. Lagrange relaxation and Dantzig-Wolfe decomposition

    DEFF Research Database (Denmark)

    Vidal, Rene Victor Valqui

    1989-01-01

    The paper concerns a large-scale linear programming problem having a block-diagonal structure with coupling constraints. It is shown that there are deep connections between the Lagrange relaxation techniques and the Dantzig-Wolfe decomposition methods...

  12. Precession Relaxation of Viscoelastic Oblate Rotators

    CERN Document Server

    Frouard, Julien

    2016-01-01

    Various perturbations (collisions, close encounters, YORP) destabilise the rotation of a small body, leaving it in a non-principal spin state. Then the body experiences alternating stresses generated by the inertial forces. The ensuing inelastic dissipation reduces the kinetic energy, without influencing the angular momentum. This yields nutation relaxation, i.e., evolution of the spin towards rotation about the maximal-inertia axis. Knowledge of the timescales needed to damp the nutation is crucial in studies of small bodies' dynamics. In the past, nutation relaxation has been described by an empirical quality factor introduced to parameterise the dissipation rate and to evade the discussion of the actual rheological parameters and their role in dissipation. This approach is unable to describe the dependence of the relaxation rate upon the nutation angle, because we do not know the quality factor's dependence on the frequency (which is a function of the nutation angle). This leaves open the question of relax...

  13. Labor Augmentation with Oxytocin Decreases Glutathione Level

    Directory of Open Access Journals (Sweden)

    Naomi Schneid-Kofman

    2009-01-01

    Full Text Available Objective. To compare oxidative stress following spontaneous vaginal delivery with that induced by Oxytocin augmented delivery. Methods. 98 women recruited prior to labor. 57 delivered spontaneously, while 41 received Oxytocin for augmentation of labor. Complicated deliveries and high-risk pregnancies were excluded. Informed consent was documented. Arterial cord blood gases, levels of Hematocrit, Hemoglobin, and Bilirubin were studied. Glutathione (GSH concentration was measured by a spectroscopic method. Plasma and red blood cell (RBC levels of Malondialdehyde indicated lipid peroxidation. RBC uptake of phenol red denoted cell penetrability. SPSS data analysis was used. Results. Cord blood GSH was significantly lower in the Oxytocin group (2.3±0.55 mM versus 2.55±0.55 mM, =.01. No differences were found in plasma or RBC levels of MDA or in uptake of Phenol red between the groups. Conclusion. Lower GSH levels following Oxytocin augmentation indicate an oxidative stress, though selected measures of oxidative stress demonstrate no cell damage.

  14. Ridge augmentation in an organ transplant patient.

    Science.gov (United States)

    Dalla Torre, D; Burtscher, D

    2016-05-01

    With the continuing progress in medicine, the number of successful organ transplantations has continued to increase, a fact that also concerns dentists and implantologists. Implantology after organ transplantation remains controversial due to the patient's immunocompromised situation and the corresponding risk of infection. Only a few studies on this topic have been reported, with all of them showing the dental implant success rates in transplant patients to be similar to those in healthy subjects. However, immunosuppression has been identified as a contraindication to bone augmentation. Consequently, there is still a lack of knowledge regarding pre-implantology bone grafting procedures. The following case report describes the use of ridge augmentation and extended bilateral sinus lift procedures in a liver transplant patient. The patient was treated with an implant-supported fixed prosthesis in the upper jaw and was followed up for a total of 28 months after implant insertion. According to the findings presented, pre-implantology augmentation procedures may be performed successfully in immunosuppressed organ transplant patients. Stable peri-implant conditions were shown over a period of more than 2 years. Nevertheless, further investigations are needed to define a safe treatment protocol for these high-risk patients. PMID:26711250

  15. Adaptive information design for outdoor augmented reality.

    Science.gov (United States)

    Neuhöfer, Jan A; Govaers, Felix; El Mokni, Hichem; Alexander, Thomas

    2012-01-01

    Augmented Reality focuses on the enrichment of the user's natural field of view by consistent integration of text, symbols and interactive three-dimensional objects in real time. Placing virtual objects directly into the user's view in a natural context empowers highly dynamic applications. On the other hand, this necessitates deliberate choice of information design and density, in particular for deployment in hazardous environments like military combat scenarios. As the amount of information needed is not foreseeable and strongly depends on the individual mission, an appropriate system must offer adequate adaptation capabilities. The paper presents a prototypical, vehicle-mountable Augmented Reality vision system, designed for enhancing situation awareness in stressful urban warfare scenarios. Tracking, as one of the most crucial challenges for outdoor Augmented Reality, is accomplished by means of a Differential-GPS approach while the type of display to attach can be modified, ranging from ocular displays to standard LCD mini-screens. The overall concept also includes envisioning of own troops (blue forces), for which a multi-sensor tracking approach has been chosen. As a main feature, the system allows switching between different information categories, focusing on friendly, hostile, unidentified or neutral data. Results of an empirical study on the superiority of an in-view navigation cue approach conclude the paper.

  16. Augmented spaces, a look beyond advertising

    Directory of Open Access Journals (Sweden)

    Oana Andreea Căplescu

    2014-03-01

    Full Text Available From billboards to urban screens and now to media facades, the augmentation of our cities has expanded, changing social behaviours and public space consumption. Smart buildings are being developed and, much like the smartphones, these hybrids are not only in sci-fi movies anymore. One of the main promoters of media facades and media architecture has been the advertising industry. But artists and designers showed the potential of different approaches, experimenting with digitally augmented spaces both indoors and outdoors. Going beyond the commercial aspect of being an advertising and branding tool, these hybrids offer a variety of uses. Questions of how and where we use them and how they can improve our life quality are discussed here emphasizing that we developed a media behaviour, adjusting our relation to the physical and information environments. I examine some of the most notable experiments outside of the advertising sphere, offering a base for future development of augmented spaces and opening the discussion over the language of new media architecture.

  17. Silicone-induced Granuloma After Buttock Augmentation

    Science.gov (United States)

    Singh, Mansher; Solomon, Isaac H.; Calderwood, Michael S.

    2016-01-01

    Summary: Liquid silicone is inexpensive, minimally antigenic, and likely noncarcinogenic. Its simplicity of use has made it popular as a soft-tissue filler in some parts of the world for patients seeking rapid soft-tissue augmentation of the face, breast, and buttocks. However, multiple reports describe the complications of silicone injections such as cellulitis, abscess, ulceration, and foreign body migration. We present an unusual complication of granulomatous reaction secondary to silicone injection for buttock augmentation, with a literature review of this entity and treatment options. Our patient was a 54-year-old woman who underwent bilateral buttock augmentation in the Dominican Republic using percutaneous injection of liquid silicone. She presented to our facility 1 year after this procedure with pain and inflammation of both buttocks. She was diagnosed with multiple silicone granulomas. Her symptoms completely resolved with a 3-week course of minocycline. Granulomatous reactions to silicone may occur months to years after the silicone injection. The incidence of such complications may be increased when nonmedical-grade silicone is used, and hence, when these procedures are performed in developing countries. Tetracycline antibiotics, especially minocycline, may be used to achieve sustained remission. PMID:27014553

  18. IMPLEMENTATION OF AERONAUTICAL LOCAL SATELLITE AUGMENTATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Stojce Ilcev

    2011-03-01

    Full Text Available Abstract. This paper introduces development and implementation of new Local Satellite AugmentationSystem as an integration component of the Regional Satellite Augmentation System (RSAS employingcurrent and new Satellite Communications, Navigation and Surveillance (CNS for improvement of the AirTraffic Control (ATC and Air Traffic Management (ATM and for enhancement safety systems includingtransport security and control of flights in all stages, airport approaching, landing, departures and allmovements over airport surface areas. The current first generation of the Global Navigation Satellite SystemGNSS-1 applications are represented by fundamental military solutions for Position, Velocity and Time ofthe satellite navigation and determination systems such as the US GPS and Russian GLONASS (Former-USSR requirements, respectively. The establishment of Aeronautical CNS is also discussed as a part ofGlobal Satellite Augmentation Systems of GPS and GLONASS systems integrated with existing and futureRSAS and LSAS in airports areas. Specific influence and factors related to the Comparison of the Currentand New Aeronautical CNS System including the Integration of RSAS and GNSS solutions are discussedand packet of facts is determined to maximize the new satellite Automatic Dependent Surveillance System(ADSS and Special Effects of the RSAS Networks. The possible future integration of RSAS and GNSS andthe common proposal of the satellite Surface Movement Guidance and Control are presented in thechangeless ways as of importance for future enfacements of ATC and ATM for any hypothetical airportinfrastructure.Keywords: ADSS, ATC, ATM, CNS, GSAS, LRAS, RSAS, SMGC, Special Effects of RSAS.

  19. Service connectivity architecture for mobile augmented reality

    Science.gov (United States)

    Turunen, Tuukka; Pyssysalo, Tino; Roening, Juha

    2001-06-01

    Mobile augmented reality can be utilized in a number of different services, and it provides a lot of added value compared to the interfaces used in mobile multimedia today. Intelligent service connectivity architecture is needed for the emerging commercial mobile augmented reality services, to guarantee mobility and interoperability on a global scale. Some of the key responsibilities of this architecture are to find suitable service providers, to manage the connection with and utilization of such providers, and to allow smooth switching between them whenever the user moves out of the service area of the service provider she is currently connected to. We have studied the potential support technologies for such architectures and propose a way to create an intelligent service connectivity architecture based on current and upcoming wireless networks, an Internet backbone, and mechanisms to manage service connectivity in the upper layers of the protocol stack. In this paper, we explain the key issues of service connectivity, describe the properties of our architecture, and analyze the functionality of an example system. Based on these, we consider our proposition a good solution to the quest for global interoperability in mobile augmented reality services.

  20. Basic MR relaxation mechanisms and contrast agent design.

    Science.gov (United States)

    De León-Rodríguez, Luis M; Martins, André F; Pinho, Marco C; Rofsky, Neil M; Sherry, A Dean

    2015-09-01

    The diagnostic capabilities of magnetic resonance imaging (MRI) have undergone continuous and substantial evolution by virtue of hardware and software innovations and the development and implementation of exogenous contrast media. Thirty years since the first MRI contrast agent was approved for clinical use, a reliance on MR contrast media persists, largely to improve image quality with higher contrast resolution and to provide additional functional characterization of normal and abnormal tissues. Further development of MR contrast media is an important component in the quest for continued augmentation of diagnostic capabilities. In this review we detail the many important considerations when pursuing the design and use of MR contrast media. We offer a perspective on the importance of chemical stability, particularly kinetic stability, and how this influences one's thinking about the safety of metal-ligand-based contrast agents. We discuss the mechanisms involved in MR relaxation in the context of probe design strategies. A brief description of currently available contrast agents is accompanied by an in-depth discussion that highlights promising MRI contrast agents in the development of future clinical and research applications. Our intention is to give a diverse audience an improved understanding of the factors involved in developing new types of safe and highly efficient MR contrast agents and, at the same time, provide an appreciation of the insights into physiology and disease that newer types of responsive agents can provide.

  1. Adult Partner-Augmented Communication Input to Youth with Mental Retardation Using the System for Augmenting Language (SAL).

    Science.gov (United States)

    Sevcik, Rose A.; And Others

    1995-01-01

    This study examined the frequency and nature of augmented input that adult partners provided to 13 youth with moderate to severe mental retardation as they began to use the System for Augmenting Language. Analyses revealed differences in the frequency and in the manner and style with which home and school partners provided augmented input.…

  2. Ubiquitous "glassy" relaxation in catalytic reaction networks

    OpenAIRE

    Awazu, Akinori; Kaneko, Kunihiko

    2009-01-01

    Study of reversible catalytic reaction networks is important not only as an issue for chemical thermodynamics but also for protocells. From extensive numerical simulations and theoretical analysis, slow relaxation dynamics to sustain nonequlibrium states are commonly observed. These dynamics show two types of salient behaviors that are reminiscent of glassy behavior: slow relaxation along with the logarithmic time dependence of the correlation function and the emergence of plateaus in the rel...

  3. Protein dynamics from nuclear magnetic relaxation.

    Science.gov (United States)

    Charlier, Cyril; Cousin, Samuel F; Ferrage, Fabien

    2016-05-01

    Nuclear magnetic resonance is a ubiquitous spectroscopic tool to explore molecules with atomic resolution. Nuclear magnetic relaxation is intimately connected to molecular motions. Many methods and models have been developed to measure and interpret the characteristic rates of nuclear magnetic relaxation in proteins. These approaches shed light on a rich and diverse range of motions covering timescales from picoseconds to seconds. Here, we introduce some of the basic concepts upon which these approaches are built and provide a series of illustrations.

  4. Relaxation techniques for children and young people.

    Science.gov (United States)

    Hobbie, C

    1989-01-01

    The relaxation response, relaxation with mental imagery/self-hypnosis, and centering are techniques that can be used by the nurse practitioner in a variety of clinical situations to help children and young people manage stress. These approaches also can be used to treat certain common pediatric problems, such as headaches, enuresis, acute and chronic pain, and habit disorders. The techniques and their appropriate use are described. PMID:2647960

  5. Analytical representations for relaxation functions of glasses

    OpenAIRE

    Hilfer, R.

    2002-01-01

    Analytical representations in the time and frequency domains are derived for the most frequently used phenomenological fit functions for non-Debye relaxation processes. In the time domain the relaxation functions corresponding to the complex frequency dependent Cole-Cole, Cole-Davidson and Havriliak-Negami susceptibilities are also represented in terms of $H$-functions. In the frequency domain the complex frequency dependent susceptibility function corresponding to the time dependent stretche...

  6. Review of relaxation times of tissues

    International Nuclear Information System (INIS)

    NMR proton imaging techniques are based on fundamental properties of the water molecules of the body tissues, in particular the varying ability of different populations of water protons to lose spin orientation energy to the immediate environment (spin-lattice relaxation with a time constant of T1) or to randomise their spin orientation (spin-spin relaxation which contributes largely to T2). In general it has been shown that changes in the T1 and T2 relaxation times of water protons in pathological tissue are non-specific. For this reason it is most unlikely that examination of the relaxation times of excised tissues samples will ever be a primary diagnostic tool in clinical medicine. NMR imaging, however, offers this information in a different way, since spatial information is added to the relaxation time, and the pathological tissue is shown within its host tissue so that differences in relaxation time appear as contrast in a visual display. The imaging technique is also of use when a relaxation time is seen which is sufficiently different to identify the tissue as abnormal, but when there are several different conditions which could cause such an abnormal relaxation time. In this case the spatial information, showing a precise position or, perhaps, a mottling throughout a large region of the organ, can provide the missing factor which, along with previous clinical knowledge, enables a certain diagnosis to be made. As one of the battery of hospital diagnostic tests it is believed that knowledge of the extent and location of changes in the state of the body water will prove to be of great assistance

  7. Relaxation processes in mixed gas dynamic lasers

    Energy Technology Data Exchange (ETDEWEB)

    Soloukhin, R.I.; Fomin, N.A.

    1978-12-01

    With the solution of gasdynamic and CO/sub 2/--N/sub 2/ vibrational relaxation equations, analysis was made of vibrational energy losses associated with relaxation processes in an inverted molecular system with selective thermal excitation and supersonic flow mixing of the pumping and radiative gas components. Optimum operation conditions were determined, and a possibility of regimes with low vibrational losses was found to be feasible at available specific energies up to 200 J/g.

  8. Dielectric relaxation spectroscopy of phlogopite mica

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Navjeet; Singh, Mohan; Singh, Anupinder [Department of Physics, Guru Nanak Dev University, Amritsar, Punjab 143005 (India); Awasthi, A.M. [Thermodynamics Laboratory, UGC-DAE Consortium for Scientific Research, Indore 452001 (India); Singh, Lakhwant, E-mail: lakhwant@yahoo.com [Department of Physics, Guru Nanak Dev University, Amritsar, Punjab 143005 (India)

    2012-11-15

    An in-depth investigation of the dielectric characteristics of annealed phlogopite mica has been conducted in the frequency range 0.1 Hz-10 MHz and over the temperature range 653-873 K through the framework of dielectric permittivity, electric modulus and conductivity formalisms. These formalisms show qualitative similarities in relaxation processes. The frequency dependence of the M Double-Prime and dc conductivity is found to obey an Arrhenius law and the activation energy of the phlogopite mica calculated both from dc conductivity and the modulus spectrum is similar, indicating that same type of charge carriers are involved in the relaxation phenomena. The electric modulus and conductivity data have been fitted with the Havriliak-Negami function. Scaling of M Prime , M Double-Prime , ac conductivity has also been performed in order to obtain insight into the relaxation mechanisms. The scaling behaviour indicates that the relaxation describes the same mechanism at different temperatures. The relaxation mechanism was also examined using the Cole-Cole approach. The study elaborates that the investigation regarding the temperature and frequency dependence of dielectric relaxation in the phlogopite mica will be helpful for various cutting edge applications of this material in electrical engineering.

  9. Dielectric relaxation of gamma irradiated muscovite mica

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Navjeet [Department of Physics, Guru Nanak Dev University, Amritsar, Punjab 143005 (India); Singh, Mohan, E-mail: mohansinghphysics@gmail.com [Department of Physics, Guru Nanak Dev University, Amritsar, Punjab 143005 (India); Singh, Lakhwant [Department of Physics, Guru Nanak Dev University, Amritsar, Punjab 143005 (India); Awasthi, A.M. [Thermodynamics Laboratory, UGC-DAE Consortium for Scientific Research, Indore 452001 (India); Lochab, S.P. [Inter-University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110067 (India)

    2015-03-15

    Highlights: • The present article reports the effect of gamma irradiation on the dielectric relaxation characteristics of muscovite mica. • Dielectric and electrical relaxations have been analyzed in the framework of dielectric permittivity, electric modulus and Cole–Cole formalisms. • The frequency dependent electrical conductivity has been rationalized using Johnsher’s universal power law. • The experimentally measured electric modulus and conductivity data have been fitted using Havriliak–Negami dielectric relaxation function. - Abstract: In the present research, the dielectric relaxation of gamma irradiated muscovite mica was studied in the frequency range of 0.1 Hz–10 MHz and temperature range of 653–853 K, using the dielectric permittivity, electric modulus and conductivity formalisms. The dielectric constants (ϵ′ and ϵ′′) are found to be high for gamma irradiated muscovite mica as compared to the pristine sample. The frequency dependence of the imaginary part of complex electric modulus (M′′) and dc conductivity data conforms Arrhenius law with single value of activation energy for pristine sample and two values of activation energy for gamma irradiated mica sample. The experimentally assessed electric modulus and conductivity information have been interpreted by the Havriliak–Negami dielectric relaxation explanation. Using the Cole–Cole framework, an analysis of real and imaginary characters of the electric modulus for pristine and gamma irradiated sample was executed which reflects the non-Debye relaxation mechanism.

  10. Rounded stretched exponential for time relaxation functions.

    Science.gov (United States)

    Powles, J G; Heyes, D M; Rickayzen, G; Evans, W A B

    2009-12-01

    A rounded stretched exponential function is introduced, C(t)=exp{(tau(0)/tau(E))(beta)[1-(1+(t/tau(0))(2))(beta/2)]}, where t is time, and tau(0) and tau(E) are two relaxation times. This expression can be used to represent the relaxation function of many real dynamical processes, as at long times, t>tau(0), the function converges to a stretched exponential with normalizing relaxation time, tau(E), yet its expansion is even or symmetric in time, which is a statistical mechanical requirement. This expression fits well the shear stress relaxation function for model soft soft-sphere fluids near coexistence, with tau(E)Cole-Cole plots for dielectric and shear stress relaxation (both the modulus and viscosity forms). It is shown that both the dielectric spectra and dynamic shear modulus imaginary parts approach the real axis with a slope equal to 0 at high frequency, whereas the dynamic viscosity has an infinite slope in the same limit. This indicates that inertial effects at high frequency are best discerned in the modulus rather than the viscosity Cole-Cole plot. As a consequence of the even expansion in time of the shear stress relaxation function, the value of the storage modulus derived from it at very high frequency exceeds that in the infinite frequency limit (i.e., G(infinity)).

  11. Can Transabdominal Sonography Predict Pelvic Relaxation?

    Directory of Open Access Journals (Sweden)

    Atoosa Adibi

    2009-01-01

    Full Text Available Introduction: Pelvic relaxation and cystocele is a common problem in middle to old age women. Transabdominal ultrasound (TAS is a noninvasive, available routine procedure in many situations. We evaluated whether TAS can predict pelvic relaxation or not. "nMaterials and Methods: In a cross sectional case- control study one hundred women 30 years or older were enrolled into the study. An expert female urologist examined the cases for the presence of signs and the grading of pelvic relaxation. A single radiologist blinded to pelvic exam results performed TAS. In the full bladder state the following criteria were recorded: 1. Bladder outlet funneling at rest and valsalva 2. Bladder base position in relation to the superior edge of the pubis symphysis 3. Bladder wall thickness 4. Pelvicaliceal system stasis 5.Post voiding residual urine ( PVR. "nResults: Bladder outlet funneling can predict pelvic relaxation (Se, 91.3%, both at rest and after valsalva. If the bladder base descent is seen below the superior edge of the pubis with the cut off point of 5 mm,it can predict pelvic relaxation. "nConclusion: TAS can be used as a safe and available modality to predict pelvic relaxation

  12. Approximate Augmented Lagrangian Functions and Nonlinear Semidefinite Programs

    Institute of Scientific and Technical Information of China (English)

    X. X. HUANG; K. L. TEO; X. Q. YANG

    2006-01-01

    In this paper, an approximate augmented Lagrangian function for nonlinear semidefinite programs is introduced. Some basic properties of the approximate augmented Lagrange function such as monotonicity and convexity are discussed. Necessary and sufficient conditions for approximate strong duality results are derived. Conditions for an approximate exact penalty representation in the framework of augmented Lagrangian are given. Under certain conditions, it is shown that any limit point of a sequence of stationary points of approximate augmented Lagrangian problems is a KKT point of the original semidefinite program and that a sequence of optimal solutions to augmented Lagrangian problems converges to a solution of the original semidefinite program.

  13. Spin-lattice relaxation of the methyl group protons in solids revisited: damped quantum rotation approach.

    Science.gov (United States)

    Szymański, S

    2012-07-21

    Proton spin-lattice relaxation of the methyl group in solids had been one of the most thoroughly addressed theoretical problems in nuclear magnetic resonance (NMR) spectroscopy, considered at different levels of sophistication. For systems with substantial quantum tunneling effects, several quantum mechanical treatments were reported, although in practical applications the quantum models were always augmented with or replaced by the classical jump model. However, the latter has recently proved invalid in the description of NMR line shape effects in variable-temperature spectra of hindered methyl groups, while the competing theory of damped quantum rotation (DQR) was shown to be adequate. In this work, the spin-lattice relaxation issue for the methyl protons is readdressed using the latter theory. The main outcome is that, while the existing formulas for the relaxation rates remain unchanged, the crucial parameter entering them, the correlation time of the relevant random process, need to be reinterpreted. It proves to be the inverse of one of the two quantum-rate constants entering the DQR model, neither of which, when taken separately, can be related to the jump process. It can be identified with one describing the life-time broadening of the tunnel peaks in inelastic neutron scattering (INS) spectra of the methyl groups. Such a relationship between the relaxation and INS effects was reported from another laboratory long ago, but only for the low-temperature limit where thermal population of the excited torsional levels of the methyl group can be neglected. The whole spectrum of cases encountered in practical relaxation studies on protonated methyl groups is addressed for the first time. Preliminary experimental confirmation of this novel approach is reported, based on already published NMR data for a single crystal of methylmalonic acid. The once extensively debated issues of quenching of the coherent tunneling and of the classical limit in the dynamics of the

  14. Coherence delay augmented laser beam homogenizer

    Science.gov (United States)

    Rasmussen, P.; Bernhardt, A.

    1993-06-29

    The geometrical restrictions on a laser beam homogenizer are relaxed by ug a coherence delay line to separate a coherent input beam into several components each having a path length difference equal to a multiple of the coherence length with respect to the other components. The components recombine incoherently at the output of the homogenizer, and the resultant beam has a more uniform spatial intensity suitable for microlithography and laser pantogography. Also disclosed is a variable aperture homogenizer, and a liquid filled homogenizer.

  15. The use of (double) relaxation oscillation SQUIDs as a sensor

    NARCIS (Netherlands)

    Duuren, van M.J.; Brons, G.C.S.; Kattouw, H.; Flokstra, J.; Rogalla, H.

    1997-01-01

    Relaxation Oscillation SQUIDs (ROSs) and Double Relaxation Oscillation SQUIDs (DROSs) are based on relaxation oscillations that are induced in hysteretic dc SQUIDs by an external L-R shunt. The relaxation frequency of a ROS varies with the applied flux Φ, whereas the output of a DROS is a dc voltage

  16. Repeated vertebral augmentation for new vertebral compression fractures of postvertebral augmentation patients: a nationwide cohort study

    OpenAIRE

    Liang CL; Wang HK; Syu FK; Wang KW; Lu K; Liliang PC

    2015-01-01

    Cheng-Loong Liang,1 Hao-Kwan Wang,1 Fei-Kai Syu,2 Kuo-Wei Wang,1 Kang Lu,1 Po-Chou Liliang1 1Department of Neurosurgery, E-Da Hospital, I-Shou University, Kaohsiung City, Taiwan; 2Department of Pharmacy, China Medical University Hospital, Taichung City, Taiwan Purpose: Postvertebral augmentation vertebral compression fractures are common; repeated vertebral augmentation is usually performed for prompt pain relief. This study aimed to evaluate the incidence and risk factors of repeat vertebr...

  17. Motional Spin Relaxation in Large Electric Fields

    CERN Document Server

    Schmid, Riccardo; Filippone, B W

    2008-01-01

    We discuss the precession of spin-polarized Ultra Cold Neutrons (UCN) and $^{3}\\mathrm{He}$ atoms in uniform and static magnetic and electric fields and calculate the spin relaxation effects from motional $v\\times E$ magnetic fields. Particle motion in an electric field creates a motional $v\\times E$ magnetic field, which when combined with collisions, produces variations of the total magnetic field and results in spin relaxation of neutron and $^{3}\\mathrm{He}$ samples. The spin relaxation times $T_{1}$ (longitudinal) and $T_{2}$ (transverse) of spin-polarized UCN and $^{3}\\mathrm{He}$ atoms are important considerations in a new search for the neutron Electric Dipole Moment at the SNS \\emph{nEDM} experiment. We use a Monte Carlo approach to simulate the relaxation of spins due to the motional $v\\times E$ field for UCN and for $^{3}\\mathrm{He}$ atoms at temperatures below $600 \\mathrm{mK}$. We find the relaxation times for the neutron due to the $v\\times E$ effect to be long compared to the neutron lifetime, ...

  18. Doppler effect induced spin relaxation boom

    Science.gov (United States)

    Zhao, Xinyu; Huang, Peihao; Hu, Xuedong

    2016-03-01

    We study an electron spin qubit confined in a moving quantum dot (QD), with our attention on both spin relaxation, and the product of spin relaxation, the emitted phonons. We find that Doppler effect leads to several interesting phenomena. In particular, spin relaxation rate peaks when the QD motion is in the transonic regime, which we term a spin relaxation boom in analogy to the classical sonic boom. This peak indicates that a moving spin qubit may have even lower relaxation rate than a static qubit, pointing at the possibility of coherence-preserving transport for a spin qubit. We also find that the emitted phonons become strongly directional and narrow in their frequency range as the qubit reaches the supersonic regime, similar to Cherenkov radiation. In other words, fast moving excited spin qubits can act as a source of non-classical phonons. Compared to classical Cherenkov radiation, we show that quantum dot confinement produces a small but important correction on the Cherenkov angle. Taking together, these results have important implications to both spin-based quantum information processing and coherent phonon dynamics in semiconductor nanostructures.

  19. Repeated vertebral augmentation for new vertebral compression fractures of postvertebral augmentation patients: a nationwide cohort study

    Directory of Open Access Journals (Sweden)

    Liang CL

    2015-03-01

    Full Text Available Cheng-Loong Liang,1 Hao-Kwan Wang,1 Fei-Kai Syu,2 Kuo-Wei Wang,1 Kang Lu,1 Po-Chou Liliang1 1Department of Neurosurgery, E-Da Hospital, I-Shou University, Kaohsiung City, Taiwan; 2Department of Pharmacy, China Medical University Hospital, Taichung City, Taiwan Purpose: Postvertebral augmentation vertebral compression fractures are common; repeated vertebral augmentation is usually performed for prompt pain relief. This study aimed to evaluate the incidence and risk factors of repeat vertebral augmentation.Methods: We performed a retrospective, nationwide, population-based longitudinal observation study, using the National Health Insurance Research Database (NHIRD of Taiwan. All patients who received vertebral augmentation for vertebral compression fractures were evaluated. The collected data included patient characteristics (demographics, comorbidities, and medication exposure and repeat vertebral augmentation. Kaplan–Meier and stratified Cox proportional hazard regressions were performed for analyses.Results: The overall incidence of repeat vertebral augmentation was 11.3% during the follow-up until 2010. Patients with the following characteristics were at greater risk for repeat vertebral augmentation: female sex (AOR=1.24; 95% confidence interval [CI]: 1.10–2.36, advanced age (AOR=1.60; 95% CI: 1.32–2.08, diabetes mellitus (AOR=4.31; 95% CI: 4.05–5.88, cerebrovascular disease (AOR=4.09; 95% CI: 3.44–5.76, dementia (AOR=1.97; 95% CI: 1.69–2.33, blindness or low vision (AOR=3.72; 95% CI: 2.32–3.95, hypertension (AOR=2.58; 95% CI: 2.35–3.47, and hyperlipidemia (AOR=2.09; 95% CI: 1.67–2.22. Patients taking calcium/ vitamin D (AOR=2.98; 95% CI: 1.83–3.93, bisphosphonates (AOR=2.11; 95% CI: 1.26–2.61, or calcitonin (AOR=4.59; 95% CI: 3.40–5.77 were less likely to undergo repeat vertebral augmentation; however, those taking steroids (AOR=7.28; 95% CI: 6.32–8.08, acetaminophen (AOR=3.54; 95% CI: 2.75–4.83, or nonsteroidal

  20. Repeated vertebral augmentation for new vertebral compression fractures of postvertebral augmentation patients: a nationwide cohort study

    Directory of Open Access Journals (Sweden)

    Liang CL

    2015-03-01

    Full Text Available Cheng-Loong Liang,1 Hao-Kwan Wang,1 Fei-Kai Syu,2 Kuo-Wei Wang,1 Kang Lu,1 Po-Chou Liliang1 1Department of Neurosurgery, E-Da Hospital, I-Shou University, Kaohsiung City, Taiwan; 2Department of Pharmacy, China Medical University Hospital, Taichung City, Taiwan Purpose: Postvertebral augmentation vertebral compression fractures are common; repeated vertebral augmentation is usually performed for prompt pain relief. This study aimed to evaluate the incidence and risk factors of repeat vertebral augmentation.Methods: We performed a retrospective, nationwide, population-based longitudinal observation study, using the National Health Insurance Research Database (NHIRD of Taiwan. All patients who received vertebral augmentation for vertebral compression fractures were evaluated. The collected data included patient characteristics (demographics, comorbidities, and medication exposure and repeat vertebral augmentation. Kaplan–Meier and stratified Cox proportional hazard regressions were performed for analyses.Results: The overall incidence of repeat vertebral augmentation was 11.3% during the follow-up until 2010. Patients with the following characteristics were at greater risk for repeat vertebral augmentation: female sex (AOR=1.24; 95% confidence interval [CI]: 1.10–2.36, advanced age (AOR=1.60; 95% CI: 1.32–2.08, diabetes mellitus (AOR=4.31; 95% CI: 4.05–5.88, cerebrovascular disease (AOR=4.09; 95% CI: 3.44–5.76, dementia (AOR=1.97; 95% CI: 1.69–2.33, blindness or low vision (AOR=3.72; 95% CI: 2.32–3.95, hypertension (AOR=2.58; 95% CI: 2.35–3.47, and hyperlipidemia (AOR=2.09; 95% CI: 1.67–2.22. Patients taking calcium/ vitamin D (AOR=2.98; 95% CI: 1.83–3.93, bisphosphonates (AOR=2.11; 95% CI: 1.26–2.61, or calcitonin (AOR=4.59; 95% CI: 3.40–5.77 were less likely to undergo repeat vertebral augmentation; however, those taking steroids (AOR=7.28; 95% CI: 6.32–8.08, acetaminophen (AOR=3.54; 95% CI: 2.75–4.83, or nonsteroidal

  1. Augmented virtuality for arthroscopic knee surgery.

    Science.gov (United States)

    Li, John M; Bardana, Davide D; Stewart, A James

    2011-01-01

    This paper describes a computer system to visualize the location and alignment of an arthroscope using augmented virtuality. A 3D computer model of the patient's joint (from CT) is shown, along with a model of the tracked arthroscopic probe and the projection of the camera image onto the virtual joint. A user study, using plastic bones instead of live patients, was made to determine the effectiveness of this navigated display; the study showed that the navigated display improves target localization in novice residents. PMID:22003616

  2. Stem Cells for Augmenting Tendon Repair

    Directory of Open Access Journals (Sweden)

    Lawrence V. Gulotta

    2012-01-01

    Full Text Available Tendon healing is fraught with complications such as reruptures and adhesion formation due to the formation of scar tissue at the injury site as opposed to the regeneration of native tissue. Stem cells are an attractive option in developing cell-based therapies to improve tendon healing. However, several questions remain to be answered before stem cells can be used clinically. Specifically, the type of stem cell, the amount of cells, and the proper combination of growth factors or mechanical stimuli to induce differentiation all remain to be seen. This paper outlines the current literature on the use of stem cells for tendon augmentation.

  3. Lean stability augmentation for premixing, prevaporizing combustors

    Science.gov (United States)

    Mcvey, J. B.; Kennedy, J. B.

    1979-01-01

    An experimental program was conducted to investigate techniques for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. Augmented flameholders employing recessed perforated plates, catalyzed tube bundles, and configurations in which pilot fuel was injected into the wakes of V-gutters or perforated plates were designed and tested. Stable operation of the piloted designs was achieved at equivalence ratios as low as 0.25; NOx emissions of less than 1.0 g/kg at simulated turbine engine cruise conditions were obtained. A piloted perforated plate employing four percent pilot fuel flow produced the best performance while meeting severe NOx constraints.

  4. Pulmonary Embolism with Vertebral Augmentation Procedures

    Directory of Open Access Journals (Sweden)

    Swetha Bopparaju

    2013-01-01

    Full Text Available With the prevalence of an aging American population on the rise, osteoporotic vertebral fractures are becoming a common occurrence, resulting in an increase in vertebral augmentation procedures and associated complications such as cement leakage, vertebral compressions, and pulmonary embolism. We describe a patient who presented with respiratory distress three years following kyphoplasty of the lumbar vertebra. Computed tomography (CT angiogram of the chest confirmed the presence of polymethylmethacrylate (PMMA cement in the lung fields and pulmonary vessels. We conducted a systematic review of the published literature identifying effective management strategies for the treatment of vertebroplasty-associated pulmonary embolism.

  5. Freegaming: Mobile, Collaborative, Adaptive and Augmented Exergaming

    Directory of Open Access Journals (Sweden)

    Levent Görgü

    2012-01-01

    Full Text Available Addressing the obesity epidemic that plagues many societies remains an outstanding public health issue. One innovative approach to addressing this problem is Exergaming. A combination of Exercise and Gaming, the objective is to motivate people participate in exercise regimes, usually in their home environment. In this article a more holistic interpretation of this exercise paradigm is proposed. Freegaming augments Exergaming in a number of key dimensions but especially through the promotion of games in outdoor mobile contexts and within a social environment. The design and implementation of a platform for Freegaming is described and illustrated through the description of a sample game.

  6. Terrain Simplification Research in Augmented Scene Modeling

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    environment. As one of the most important tasks in augmented scene modeling, terrain simplification research has gained more and more attention. In this paper, we mainly focus on point selection problem in terrain simplification using triangulated irregular network. Based on the analysis and comparison of traditional importance measures for each input point, we put forward a new importance measure based on local entropy. The results demonstrate that the local entropy criterion has a better performance than any traditional methods. In addition, it can effectively conquer the "short-sight" problem associated with the traditional methods.

  7. Augmented Reality Sultan Deli Di Istana Maimun

    OpenAIRE

    Nathan P. L

    2016-01-01

    Augmented reality is a technology that can provide visualization of 3D models. Based from that technology, the modeling from a picture of Sultan Deli Istana Maimun can be applied to restore photos Sultan Deli into a three-dimensional model. This is due to Sultan Deli which is one of the important figures in the history of Medan city known less by the public. Submission of Deli Sultanate history only through such two-dimensional images and other archives. The photo shows the Sultan of Deli ev...

  8. A Density Functional Study of Atomic Hydrogen and Oxygen Chemisorption on the Relaxed (0001) Surface of Double Hexagonal Close Packed Americium

    OpenAIRE

    Dholabhai, P. P.; Atta-Fynn, R.; A.K. Ray

    2009-01-01

    Ab initio total energy calculations within the framework of density functional theory have been performed for atomic hydrogen and oxygen chemisorption on the (0001) surface of double hexagonal packed americium using a full-potential all-electron linearized augmented plane wave plus local orbitals method. Chemisorption energies were optimized with respect to the distance of the adatom from the relaxed surface for three adsorption sites, namely top, bridge, and hollow hcp sites, the adlayer str...

  9. Ubiquitous ``glassy'' relaxation in catalytic reaction networks

    Science.gov (United States)

    Awazu, Akinori; Kaneko, Kunihiko

    2009-10-01

    Study of reversible catalytic reaction networks is important not only as an issue for chemical thermodynamics but also for protocells. From extensive numerical simulations and theoretical analysis, slow relaxation dynamics to sustain nonequlibrium states are commonly observed. These dynamics show two types of salient behaviors that are reminiscent of glassy behavior: slow relaxation along with the logarithmic time dependence of the correlation function and the emergence of plateaus in the relaxation-time course. The former behavior is explained by the eigenvalue distribution of a Jacobian matrix around the equilibrium state that depends on the distribution of kinetic coefficients of reactions. The latter behavior is associated with kinetic constraints rather than metastable states and is due to the absence of catalysts for chemicals in excess and the negative correlation between two chemical species. Examples are given and generality is discussed with relevance to bottleneck-type dynamics in biochemical reactions as well.

  10. Interactive Image Enhancement by Fuzzy Relaxation

    Institute of Scientific and Technical Information of China (English)

    Shang-Ming Zhou; John Q.Can; Li-Da Xu; Robert John

    2007-01-01

    In this paper, an interactive image enhancement (HE) technique based on fuzzy relaxation is presented, which allows the user to select different intensity levels for enhancement and intermit the enhancement process according to his/her preference in applications. First, based on an analysis of the convergence of a fuzzy relaxation algorithm for image contrast enhancement, an improved version of this algorithm, which is called FuzzIIE Method 1, is suggested by deriving a relationship between the convergence regions and the parameters in the transformations defined in the algorithm. Then a method called FuzzIIE Method 2 is introduced by using a different fuzzy relaxation function, in which there is no need to re-select the parameter values for interactive image enhancement. Experimental results are presented demonstrating the enhancement capabilities of the proposed methods under different conditions.

  11. Charge relaxation dynamics of an electrolytic nanocapacitor

    CERN Document Server

    Thakore, Vaibhav

    2013-01-01

    Understanding ion relaxation dynamics in overlapping electric double layers (EDLs) is critical for the development of efficient nanotechnology based electrochemical energy storage, electrochemomechanical energy conversion and bioelectrochemical sensing devices besides controlled synthesis of nanostructured materials. Here, using Lattice Boltzmann (LB) method, we present results from the simulations of an electrolytic nanocapacitor subjected to a step potential at t = 0 for various degrees of EDL overlap, solvent viscosities, ratios of cation to anion diffusivity and electrode separations. A continuously varying molecular speed dependent relaxation time, proposed for use with the LB equation, recovers the correct microscopic description of molecular collision phenomena and holds promise for enhancing the stability of the LB algorithm. Results for large EDL overlap showed oscillatory behavior for ionic current densities in contrast to monotonic relaxation to equilibrium for low EDL overlap. Further, at low solv...

  12. Improved memristor-based relaxation oscillator

    KAUST Repository

    Mosad, Ahmed G.

    2013-09-01

    This paper presents an improved memristor-based relaxation oscillator which offers higher frequency and wider tunning range than the existing reactance-less oscillators. It also has the capability of operating on two positive supplies or alternatively a positive and negative supply. Furthermore, it has the advantage that it can be fully integrated on-chip providing an area-efficient solution. On the other hand, The oscillation concept is discussed then a complete mathematical analysis of the proposed oscillator is introduced. Furthermore, the power consumption of the new relaxation circuit is discussed and validated by the PSPICE circuit simulations showing an excellent agreement. MATLAB results are also introduced to demonstrate the resistance range and the corresponding frequency range which can be obtained from the proposed relaxation oscillator. © 2013 Elsevier Ltd.

  13. Nonlinear Model of non-Debye Relaxation

    CERN Document Server

    Zon, Boris A

    2010-01-01

    We present a simple nonlinear relaxation equation which contains the Debye equation as a particular case. The suggested relaxation equation results in power-law decay of fluctuations. This equation contains a parameter defining the frequency dependence of the dielectric permittivity similarly to the well-known one-parameter phenomenological equations of Cole-Cole, Davidson-Cole and Kohlrausch-Williams-Watts. Unlike these models, the obtained dielectric permittivity (i) obeys to the Kramers-Kronig relation; (ii) has proper behaviour at large frequency; (iii) its imaginary part, conductivity, shows a power-law frequency dependence \\sigma ~ \\omega^n where n1 is also observed in several experiments. The nonlinear equation proposed may be useful in various fields of relaxation theory.

  14. Relaxation and Diffusion in Complex Systems

    CERN Document Server

    Ngai, K L

    2011-01-01

    Relaxation and Diffusion in Complex Systems comprehensively presents a variety of experimental evidences of universal relaxation and diffusion properties in complex materials and systems. The materials discussed include liquids, glasses, colloids, polymers, rubbers, plastic crystals and aqueous mixtures, as well as carbohydrates, biomolecules, bioprotectants and pharmaceuticals. Due to the abundance of experimental data, emphasis is placed on glass-formers and the glass transition problem, a still unsolved problem in condensed matter physics and chemistry. The evidence for universal properties of relaxation and diffusion dynamics suggests that a fundamental physical law is at work. The origin of the universal properties is traced to the many-body effects of the interaction, rigorous theory of which does not exist at the present time. However, using solutions of simplified models as guides, key quantities have been identified and predictions of the universal properties generated. These predictions from Ngai’...

  15. Augmenting Your Own Reality: Student Authoring of Science-Based Augmented Reality Games

    Science.gov (United States)

    Klopfer, Eric; Sheldon, Josh

    2010-01-01

    Augmented Reality (AR) simulations superimpose a virtual overlay of data and interactions onto a real-world context. The simulation engine at the heart of this technology is built to afford elements of game play that support explorations and learning in students' natural context--their own community and surroundings. In one of the more recent…

  16. HDF Augmentation: Interoperability in the Last Mile

    Science.gov (United States)

    Plutchak, J.; Folk, M. J.; Habermann, T.; Knox, L.

    2014-12-01

    Science data files are generally written to serve well-defined purposes for a small science teams. In many cases, the organization of the data and the metadata are designed for custom tools developed and maintained by and for the team. Using these data outside of this context many times involves restructuring, re-documenting, or reformatting the data. This expensive and time-consuming process usually prevents data reuse and thus decreases the total life-cycle value of the data considerably. If the data are unique or critically important to solving a particular problem, they can be modified into a more generally usable form or metadata can be added in order to enable reuse. This augmentation process can be done to enhance data for the intended purpose or for a new purpose, to make the data available to new tools and applications, to make the data more conventional or standard, or to simplify preservation of the data. The HDF Group has addressed augmentation needs in many ways: by adding extra information, by renaming objects or moving them around in the file, by reducing complexity of the organization, and sometimes by hiding data objects that are not understood by specific applications. In some cases these approaches require re-writing the data into new files and in some cases it can be done externally, without affecting the original file. We will describe and compare several examples of each approach.

  17. Performance of a solar augmented heat pump

    Science.gov (United States)

    Bedinger, A. F. G.; Tomlinsin, J. J.; Reid, R. L.; Chaffin, D. J.

    Performance results from a test house equipped with a parallel solar augmented heat pump system with off-peak storage and a utility interconnection back-up, are presented. The collector array consisted of 12 air heating flat plates with a 9 l/sec flow. Thermal storage was consigned to a 260 cu ft crushed limestone pebble bed, with an 8.8 kW heat pump used to draw heat from storage during off-peak hours and a 15 kW electrical resistance heater used to charge the pebble bed. Monitoring and data recording were carried out on all energy inputs and outputs of the systems, and a modified TRNSYS program was employed to model the system performance. The data indicate that although the system offered the possibility of reducing the utility capacity, the addition of the solar system did not significantly augment the performance of the heat-pump system, at least in terms of the cost of supplementary electricity.

  18. Prospects for optogenetic augmentation of brain function

    Directory of Open Access Journals (Sweden)

    Sarah eJarvis

    2015-11-01

    Full Text Available The ability to optically control neural activity opens up possibilities for the restoration of normal function following neurological disorders. The temporal precision, spatial resolution and neuronal specificity that optogenetics offers is unequalled by other available methods, so will it be suitable for not only restoring but also extending brain function? As the first demonstrations of optically ``implanted'' novel memories emerge, we examine the suitability of optogenetics as a technique for extending neural function. While optogenetics is an effective tool for altering neural activity, the largest impediment for optogenetics in neural augmentation is our systems level understanding of brain function. Furthermore, a number of clinical limitations currently remain as substantial hurdles for the applications proposed. While neurotechnologies for treating brain disorders and interfacing with prosthetics have advanced rapidly in the past few years, partially addressing some of these critical problems, optogenetics is not yet suitable for use in humans. Instead we conclude that for the immediate future, optogenetics is the neurological equivalent of the 3D printer: its flexibility providing an ideal tool for testing and prototyping solutions for treating brain disorders and augmenting brain function.

  19. Virtually-augmented interfaces for tactical aircraft.

    Science.gov (United States)

    Haas, M W

    1995-05-01

    The term Fusion Interface is defined as a class of interface which integrally incorporates both virtual and non-virtual concepts and devices across the visual, auditory and haptic sensory modalities. A fusion interface is a multi-sensory virtually-augmented synthetic environment. A new facility has been developed within the Human Engineering Division of the Armstrong Laboratory dedicated to exploratory development of fusion-interface concepts. One of the virtual concepts to be investigated in the Fusion Interfaces for Tactical Environments facility (FITE) is the application of EEG and other physiological measures for virtual control of functions within the flight environment. FITE is a specialized flight simulator which allows efficient concept development through the use of rapid prototyping followed by direct experience of new fusion concepts. The FITE facility also supports evaluation of fusion concepts by operational fighter pilots in a high fidelity simulated air combat environment. The facility was utilized by a multi-disciplinary team composed of operational pilots, human-factors engineers, electronics engineers, computer scientists, and experimental psychologists to prototype and evaluate the first multi-sensory, virtually-augmented cockpit. The cockpit employed LCD-based head-down displays, a helmet-mounted display, three-dimensionally localized audio displays, and a haptic display. This paper will endeavor to describe the FITE facility architecture, some of the characteristics of the FITE virtual display and control devices, and the potential application of EEG and other physiological measures within the FITE facility.

  20. Augmenting Probabilistic Risk Assesment with Malevolent Initiators

    Energy Technology Data Exchange (ETDEWEB)

    Curtis Smith; David Schwieder

    2011-11-01

    As commonly practiced, the use of probabilistic risk assessment (PRA) in nuclear power plants only considers accident initiators such as natural hazards, equipment failures, and human error. Malevolent initiators are ignored in PRA, but are considered the domain of physical security, which uses vulnerability assessment based on an officially specified threat (design basis threat). This paper explores the implications of augmenting and extending existing PRA models by considering new and modified scenarios resulting from malevolent initiators. Teaming the augmented PRA models with conventional vulnerability assessments can cost-effectively enhance security of a nuclear power plant. This methodology is useful for operating plants, as well as in the design of new plants. For the methodology, we have proposed an approach that builds on and extends the practice of PRA for nuclear power plants for security-related issues. Rather than only considering 'random' failures, we demonstrated a framework that is able to represent and model malevolent initiating events and associated plant impacts.

  1. Augmentation of Pedicle Screw Fixation with Calcium Phosphate Cement

    Institute of Scientific and Technical Information of China (English)

    YANG Shu-hua; FU De-hao; LI Jin; XU Wei-hua; YANG Cao; YE Zhe-wei; ZUO Xiao-yan

    2004-01-01

    To determine whether a biodegradable calcium phosphate cement(CPC) provides significant augmentation of pedicle screw fixation or not,an in vitro biomechanical study was carried out to evaluate the biomechanical effect of CPC in the restoration and augmentation of pedicle screw fixation.Axial pullout test and cyclic bending resistance test were employed in the experiment,and polymethylmethacrylate (PMMA) was chosen as control.The results demonstrate that the pullout strengths following CPC restoration and augmentation are 74% greater on an average than those of the control group,but less than those of PMMA restoration group and augmentation group respectively (increased by 126% versus control).In cyclic bending resistance test,the CPC augmented screws are found to withstand a greater number of cycles or greater loading with less displacement before loosening,but the augmentation effect of PMMA is greater than that of CPC.

  2. Depicting Vortex Stretching and Vortex Relaxing Mechanisms

    Institute of Scientific and Technical Information of China (English)

    符松; 李启兵; 王明皓

    2003-01-01

    Different from many existing studies on the paranetrization of vortices, we investigate the effectiveness of two new parameters for identifying the vortex stretching and vortex relaxing mechanisms. These parameters are invariants and identify three-dimensional flow structures only, i.e. they diminish in two-dimensional flows. This is also unlike the existing vortex identification approaches which deliver information in two-dimensional flows. The present proposals have been successfully applied to identify the stretching and relaxing vortices in compressible mixing layers and natural convection flows.

  3. Integrative Augmentation with the New ISO 10000 Standards1

    OpenAIRE

    Karapetrovic Stanislav

    2014-01-01

    Application and integration of the systems based on ISO 10001: 2007 and other new augmentative standards are discussed. Particular attention is paid to the quality management standards forming the front end of the ISO 10000 series, namely ISO 10001, ISO 10002 and ISO 10003, as well as ISO 19011, the standard which stems from the original augmentative ISO 10000 guideline, specifically ISO 10011 on quality auditing. The ability of these and other similar standards to augment the performance of ...

  4. Augmented sculptures: what you see is not what you see

    OpenAIRE

    Artut, Selçuk Hüseyin; Artut, Selcuk Huseyin

    2015-01-01

    The idea of Augmented Reality Technologies enhances our ability to perceive a location with additional 3D visual elements. A point of interest becomes meta-constructed with addition of extended layers via augmented space elements. Augmented Reality presents us a virtually enriched version of a visually noticeable reality world which already exists and can easily be seen. In this article, in addition to questioning the representative existence of the art object in the work of art called “What ...

  5. Towards an interactive medical system by augmented reality

    OpenAIRE

    Khawla Ben Abderrahim; Mohamed Kallel; M. S. Bouhlel

    2013-01-01

    Augmented reality is a computer field that progresses rapidly. Its principle is to mix the real world and the virtual world. Many applications already use augmented reality, particularly the medical field. Medical image allows doctors to make diagnosis of the patient. This diagnosis allows him to make the best decision without committing professional mistakes that can cause problems. Hence the idea of integrating augmented reality with medical image analysis to help the doctor to make the bes...

  6. Maintenance applications of augmented reality for the Chinese aerospace industry

    OpenAIRE

    Ou, Peng

    2011-01-01

    Since augmented reality has not reached full maturity in use, it is not widely adopted within the aerospace industry. According to the literature review, minimal research efforts have been conducted to assess the cost-benefit or cost- effectiveness of augmented reality so far. Moreover, to the best of researcher’s knowledge, no research has been carried out to develop a systematic process for selecting and implementing augmented reality within the Chinese aerospace industry....

  7. Augmented Reality Games on the iPhone

    OpenAIRE

    Rösler, Amanda

    2009-01-01

    Augmented reality opens up a lot of possibilities for new types of games, where the real and the virtual world are mixed. Despite this, augmented reality games are still not very common, probably due to the fact that head-mounted displays (which are often used for augmented reality) are expensive. However, in recent years mobile phones have become more and more powerful, and since many of them have built-in cameras and rather large screens, they are a potential platform for augmented reality ...

  8. Optimal Constellation Design for Satellite Based Augmentation System

    Science.gov (United States)

    Kawano, Isao

    Global Positioning System (GPS) is widely utilized in daily life, for instance car navigation. Wide Area Augmentation System (WAAS) and Local Area Augmentation System (LAAS) are proposed so as to provide GPS better navigation accuracy and integrity capability. Satellite Based Augmentation System (SBAS) is a kind of WAAS and Multi-functional Transportation Satellite (MTSAT) has been developed in Japan. To improve navigation accuracy most efficiently, augmentation satellites should be so placed that minimize Geometric Dilution of Precision (GDOP) of constellation. In this paper the result of optimal constellation design for SBAS is shown.

  9. Decoupling multimode vibrational relaxations in multi-component gas mixtures: Analysis of sound relaxational absorption spectra

    Institute of Scientific and Technical Information of China (English)

    Zhang Ke-Sheng; Wang Shu; Zhu Ming; Ding Yi; Hu Yi

    2013-01-01

    Decoupling the complicated vibrational-vibrational (V-V) coupling of a multimode vibrational relaxation remains a challenge for analyzing the sound relaxational absorption in multi-component gas mixtures.In our previous work [Acta Phys.Sin.61 174301 (2012)],an analytical model to predict the sound absorption from vibrational relaxation in a gas medium is proposed.In this paper,we develop the model to decouple the V-V coupled energy to each vibrationaltranslational deexcitation path,and analyze how the multimode relaxations form the peaks of sound absorption spectra in gas mixtures.We prove that a multimode relaxation is the sum of its decoupled single-relaxation processes,and only the decoupled process with a significant isochoric-molar-heat can be observed as an absorption peak.The decoupling model clarifies the essential processes behind the peaks in spectra arising from the multimode relaxations in multi-component gas mixtures.The simulation validates the proposed decoupling model.

  10. Structural relaxation in annealed hyperquenched basaltic glasses

    DEFF Research Database (Denmark)

    Guo, Xiaoju; Mauro, John C.; Potuzak, M.;

    2012-01-01

    The enthalpy relaxation behavior of hyperquenched (HQ) and annealed hyperquenched (AHQ) basaltic glass is investigated through calorimetric measurements. The results reveal a common onset temperature of the glass transition for all the HQ and AHQ glasses under study, indicating that the primary...

  11. Magnetic relaxation in dipolar magnetic nanoparticle clusters

    Science.gov (United States)

    Hovorka, Ondrej; Barker, Joe; Chantrell, Roy; Friedman, Gary; York-Drexel Collaboration

    2013-03-01

    Understanding the role of dipolar interactions on thermal relaxation in magnetic nanoparticle (MNP) systems is of fundamental importance in magnetic recording, for optimizing the hysteresis heating contribution in the hyperthermia cancer treatment in biomedicine, or for biological and chemical sensing, for example. In this talk, we discuss our related efforts to quantify the influence of dipolar interactions on thermal relaxation in small clusters of MNPs. Setting up the master equation and solving the associated eigenvalue problem, we identify the observable relaxation time scale spectra for various types of MNP clusters, and demonstrate qualitatively different spectral characteristics depending on the point group of symmetries of the particle arrangement within the cluster - being solely a dipolar interaction effect. Our findings provide insight into open questions related to magnetic relaxation in bulk MNP systems, and may prove to be also of practical relevance, e.g., for improving robustness of methodologies in biological and chemical sensing. OH gratefully acknowledges support from a Marie Curie Intra European Fellowship within the 7th European Community Framework Programme under grant agreement PIEF-GA-2010-273014

  12. Gaussian distribution of relaxation through human blood

    Energy Technology Data Exchange (ETDEWEB)

    Abdalla, S., E-mail: soulimanabd@hotmail.co [Physics Department, Faculty of Science, King Abdul-Aziz University Jeddah, P.O. Box 80203, Jeddah 21589 (Saudi Arabia)

    2011-02-01

    The complicated structure of human blood has been characterized based on relaxation time, {tau}, and the Cole-Cole parameter, {alpha}, obtained from dielectric measurements. As previously reported by different authors, the experimental data show net deviation from the classical Debye model with certain distribution of relaxation times (D{sub {tau}}). Plots of {alpha} versus width of the relaxation rate distribution of micro-particles inside the blood show that D{sub {tau}} drastically affects the dielectric properties of the fluid. The mathematical function of D{sub {tau}} is found to be Gaussian and we find that the {alpha} values of normal blood have net lower magnitude than that of diabetic blood. These results suggest that glucose in blood increases the broadness of the parameter {alpha}, which have significant importance in diabetic-biosensor manufacture. -- Research Highlights: More than a century, the electrical properties of human blood have been of interest in wide spectra of medical applications. In a recent article published in Physics B, scientists at King Abdulaziz University in Saudi Arabia have published a study of the electrical properties of human blood (normal and diabetic). The author uses some parameters including Gaussian distribution of relaxation rates, Glucose in blood increases the broadness of the 'Cole-parameter', and dielectric measurements.

  13. MHD turbulence: Relaxation processes and variational principles

    International Nuclear Information System (INIS)

    Turbulent relaxation processes seem to play a more prominent role in magnetohydrodynamics (MHD) than in hydrodynamics and exhibit a wider variety of behavior. In decaying turbulence, ''relaxed'' states can result from highly unequal decay rates of extensive, cascadable ideal invariants' such as energy, magnetic helicity, etc. In externally driven MHD systems, the relaxed states may result from other processes, less well understood. We are exploring a formulation based on a principle of the minimum rate of energy dissipation. This is a nineteenth century principle from which seems to descend the more modern (and less well accepted) principle of ''the minimum rate of entropy production.'' Consequences of the conjectured principle are described for two cases. (1) For the reversed-field pinch (RFP), an externally-applied electric field supplies magnetic helicity at a constant rate. (2) For the case of a constant rate of dissipation of cross-helicity, a relaxed state with aligned vorticity and current densities is predicted. The former problem models the steady-state operation of a familiar fusion confinement device. The latter models certain features of solar wind turbulence, regarded as a driven, steady-state system. 51 refs

  14. Generalized approach to non-exponential relaxation

    Indian Academy of Sciences (India)

    R M Pickup; R Cywinski; C Pappas; P Fouquet; B Farago; P Falus

    2008-11-01

    Non-exponential relaxation is a universal feature of systems as diverse as glasses, spin glasses, earthquakes, financial markets and the universe. Complex relaxation results from hierarchically constrained dynamics with the strength of the constraints being directly related to the form of the relaxation, which changes from a simple exponential to a stretched exponential and a power law by increasing the constraints in the system. A global and unified approach to non-exponentiality was first achieved by Weron and was further generalized by Brouers and Sotolongo-Costa, who applied the concept of non-extensive entropy introduced by Tsallis to the relaxation of disordered systems. These concepts are now confronted with experimental results on the classical metallic spin glasses CuMn, AuFe and the insulating system EuSrS. The revisited data have also be complemented by new results on several compositions of the classical CuMn spin glass and on systems, like CoGa and CuCo, the magnetic behaviour of which is believed to arise from magnetic clusters and should be characteristic for superparamagnetism.

  15. Collection Development: Relaxation & Meditation, September 1, 2010

    Science.gov (United States)

    Lettus, Dodi

    2010-01-01

    One of the first books to document the relationship between stress and physical and emotional health was "The Relaxation Response" by Herbert Benson, M.D., with Miriam Z. Klipper. Originally published in 1975, the book grew out of Benson's observations as a cardiologist and his research as a fellow at Harvard Medical School. Benson's study of…

  16. Nonconical Relaxation for Supersonic Potential Flow

    Science.gov (United States)

    Siclari, M. J.

    1986-01-01

    Nonlinear, three-dimensional effects computed from full potentialflow equation. Nonconical Relaxation program, NCOREL, employs new computational technique for prediction of inviscid, nonlinear supersonic aerodynamics. Unlike conventional linear potential equations, NCOREL utilizes full potential flow equation to predict formation of supercritical crossflow regions, embedded shocks, and bow shocks. NCOREL written in FORTRAN IV for batch execution.

  17. Dynamics of imidazolium ionic liquids from a combined dielectric relaxation and optical Kerr effect study: evidence for mesoscopic aggregation.

    Science.gov (United States)

    Turton, David A; Hunger, Johannes; Stoppa, Alexander; Hefter, Glenn; Thoman, Andreas; Walther, Markus; Buchner, Richard; Wynne, Klaas

    2009-08-12

    We have measured the intermolecular dynamics of the 1,3-dialkylimidazolium-based room-temperature ionic liquids (RTILs) [emim][BF(4)], [emim][DCA], and [bmim][DCA] at 25 degrees C from below 1 GHz to 10 THz by ultrafast optical Kerr effect (OKE) spectroscopy and dielectric relaxation spectroscopy (DRS) augmented by time-domain terahertz and far-infrared FTIR spectroscopy. This concerted approach allows a more detailed analysis to be made of the relatively featureless terahertz region, where the higher frequency diffusional modes are strongly overlapped with librations and intermolecular vibrations. Of greatest interest though, is an intense low frequency (sub-alpha) relaxation that we show is in accordance with recent simulations that have reported mesoscopic structure arising from aggregates or clusters--structure that explains the anomalous and inconveniently high viscosities of these liquids.

  18. Transaxillary endoscopic silicone gel breast augmentation.

    Science.gov (United States)

    Strock, Louis L

    2010-09-01

    Following the return of silicone gel breast implants to the US market in 2006, augmentation with these implants has become increasingly popular. Surgeons have an array of refined techniques from which to choose when performing these procedures, many of which offer the advantage of reduced or less-obvious postoperative scarring. For obvious reasons, many patients are requesting placement of the implants through incisions that are removed from the breast area (and thereby hidden). The challenge of these approaches is to provide a level of technical control that matches what is afforded with the traditional inframammary approach. The addition of endoscopic assistance has provided a level of tissue visualization and technical control not previously possible with the transaxillary approach, with results that rival those of an inframammary procedure. In this article, the author presents his current operative technique, which has allowed for the routine placement of silicone gel breast implants through a transaxillary incision using endoscopic assistance.

  19. Axillary silicone lymphadenopathy secondary to augmentation mammaplasty

    Directory of Open Access Journals (Sweden)

    Dragoumis Dimitrios

    2010-01-01

    Full Text Available We report a case involving a 45-year-old woman, who presented with an axillary mass 10 years after bilateral cosmetic augmentation mammaplasty. A lump was detected in the left axilla, and subsequent mammography and magnetic resonance imaging demonstrated intracapsular rupture of the left breast prosthesis. An excisional biopsy of the left axillary lesion and replacement of the ruptured implant was performed. Histological analysis showed that the axillary lump was lymph nodes containing large amounts of silicone. Silicone lymphadenopathy is an obscure complication of procedures involving the use of silicone. It is thought to occur following the transit of silicone droplets from breast implants to lymph nodes by macrophages and should always be considered as a differential diagnosis in patients in whom silicone prostheses are present.

  20. Augmented reality. Fundamentals and nuclear related applications

    International Nuclear Information System (INIS)

    In recent years, Augmented Reality (AR) has attracted considerable interest from both academia and industry. Virtual Reality enables users to interact only with virtual objects in a virtual environment, but AR enables users to interact with both virtual objects and real objects in the real world. This feature supports application of AR to various fields such as education, driving, entertainment, and navigation. Especially, by application of AR to support workers in nuclear power plants, it is expected that working time and human error can be decreased. However, many problems remain unsolved to apply AR to real fields. In this lecture note, fundamental knowledge of AR is presented first including the overview of elemental technologies to realize AR. Then various AR applications to nuclear fields are described. Finally, future prospects are given. (author)

  1. Extended overview techniques for outdoor augmented reality.

    Science.gov (United States)

    Veas, Eduardo; Grasset, Raphaël; Kruijff, Ernst; Schmalstieg, Dieter

    2012-04-01

    In this paper, we explore techniques that aim to improve site understanding for outdoor Augmented Reality (AR) applications. While the first person perspective in AR is a direct way of filtering and zooming on a portion of the data set, it severely narrows overview of the situation, particularly over large areas. We present two interactive techniques to overcome this problem: multi-view AR and variable perspective view. We describe in details the conceptual, visualization and interaction aspects of these techniques and their evaluation through a comparative user study. The results we have obtained strengthen the validity of our approach and the applicability of our methods to a large range of application domains. PMID:22402683

  2. Temporal Coherence Strategies for Augmented Reality Labeling.

    Science.gov (United States)

    Madsen, Jacob Boesen; Tatzqern, Markus; Madsen, Claus B; Schmalstieg, Dieter; Kalkofen, Denis

    2016-04-01

    Temporal coherence of annotations is an important factor in augmented reality user interfaces and for information visualization. In this paper, we empirically evaluate four different techniques for annotation. Based on these findings, we follow up with subjective evaluations in a second experiment. Results show that presenting annotations in object space or image space leads to a significant difference in task performance. Furthermore, there is a significant interaction between rendering space and update frequency of annotations. Participants improve significantly in locating annotations, when annotations are presented in object space, and view management update rate is limited. In a follow-up experiment, participants appear to be more satisfied with limited update rate in comparison to a continuous update rate of the view management system. PMID:26780810

  3. Development of the augmented musculature device.

    Energy Technology Data Exchange (ETDEWEB)

    Rohrer, Brandon Robinson; Pankretz, Ty

    2004-12-01

    We developed an Augmented Musculature Device (AMD) that assists the movements of its wearer. It has direct application to aiding military and law enforcement personnel, the neurologically impaired, or those requiring any type of cybernetic assistance. The AMD consists of a collection of artificial muscles, each individually actuated, strategically placed along the surface of the human body. The actuators employed by the AMD are known as 'air muscles' and operate pneumatically. They are commercially available from several vendors and are relatively inexpensive. They have a remarkably high force-to-weight ratio--as high as 400:1 (as compared with 16:1 typical of DC motors). They are flexible and elastic, even when powered, making them ideal for interaction with humans.

  4. Camera Augmented Mobile C-arm

    Science.gov (United States)

    Wang, Lejing; Weidert, Simon; Traub, Joerg; Heining, Sandro Michael; Riquarts, Christian; Euler, Ekkehard; Navab, Nassir

    The Camera Augmented Mobile C-arm (CamC) system that extends a regular mobile C-arm by a video camera provides an X-ray and video image overlay. Thanks to the mirror construction and one time calibration of the device, the acquired X-ray images are co-registered with the video images without any calibration or registration during the intervention. It is very important to quantify and qualify the system before its introduction into the OR. In this communication, we extended the previously performed overlay accuracy analysis of the CamC system by another clinically important parameter, the applied radiation dose for the patient. Since the mirror of the CamC system will absorb and scatter radiation, we introduce a method for estimating the correct applied dose by using an independent dose measurement device. The results show that the mirror absorbs and scatters 39% of X-ray radiation.

  5. Digital Facial Augmentation for Interactive Entertainment

    Directory of Open Access Journals (Sweden)

    Naoto Hieda

    2015-08-01

    Full Text Available Digital projection technology allows for effective and entertaining spatial augmented reality applications. Leveraging the capabilities of reasonably accurate object tracking using commodity cameras and/or depth sensors to determine the 3D position and pose of objects in real time, it is possible to project dynamic graphical content on arbitrary surfaces, such as a person’s face. Coupling these capabilities with a simple drawing application, participants can have the experience of "painting" on someone’s face, or even on their own, by observing the projection in a mirror. Similarly, integrating 2D rigid-body, fluid and gravity simulation, one may interact with virtual objects projected on their own face or body.

  6. Status of Magnetohydrodynamic Augmented Propulsion Experiment

    Science.gov (United States)

    Litchford, Ron J.; Lineberry, John T.

    2007-01-01

    Over the past several years, efforts have been under way to design and develop an operationally flexible research facility for investigating the use of cross-field MHD accelerators as a potential thrust augmentation device for thermal propulsion systems, The baseline configuration for this high-power experimental facility utilizes a 1,5-MW, multi-gas arc-heater as a thermal driver for a 2-MW, MHD accelerator, which resides in a large-bore 2-tesla electromagnet. A preliminary design study using NaK seeded nitrogen as the working fluid led to an externally diagonalized segmented MHD channel configuration based on an expendable beat-sink design concept. The current status report includes a review of engineering/design work and performance optimization analyses and summarizes component hardware fabrication and development efforts, preliminary testing results, and recent progress toward full-up assembly and testing

  7. Evolving neural networks through augmenting topologies.

    Science.gov (United States)

    Stanley, Kenneth O; Miikkulainen, Risto

    2002-01-01

    An important question in neuroevolution is how to gain an advantage from evolving neural network topologies along with weights. We present a method, NeuroEvolution of Augmenting Topologies (NEAT), which outperforms the best fixed-topology method on a challenging benchmark reinforcement learning task. We claim that the increased efficiency is due to (1) employing a principled method of crossover of different topologies, (2) protecting structural innovation using speciation, and (3) incrementally growing from minimal structure. We test this claim through a series of ablation studies that demonstrate that each component is necessary to the system as a whole and to each other. What results is significantly faster learning. NEAT is also an important contribution to GAs because it shows how it is possible for evolution to both optimize and complexify solutions simultaneously, offering the possibility of evolving increasingly complex solutions over generations, and strengthening the analogy with biological evolution. PMID:12180173

  8. Out of the Cube: Augmented Rubik's Cube

    Directory of Open Access Journals (Sweden)

    Oriel Bergig

    2011-01-01

    Full Text Available Computer gaming habits have a tendency to evolve with technology, the best being ones that immerse both our imagination and intellect. Here, we describe a new game platform, an Augmented Reality Rubik's cube. The cube acts simultaneously as both the controller and the game board. Gameplay is controlled by the cube, and game assets are rendered on top of it. Shuffling and tilting operations on the cube are mapped to game interaction. We discuss the game design decisions involved in developing a game for this platform, as well as the technological challenges in implementing it. Ultimately, we describe two games and discuss the conclusions of an informal user study based on those games.

  9. Reconfigurable hardware for an augmented reality application

    Science.gov (United States)

    Toledo Moreo, F. Javier; Martinez Alvarez, J. Javier; Garrigos Guerrero, F. Javier; Ferrandez Vicente, J. Manuel

    2005-06-01

    An FPGA-based approach is proposed to build an augmented reality system in order to aid people affected by a visual disorder known as tunnel vision. The aim is to increase the user's knowledge of his environment by superimposing on his own view useful information obtained with image processing. Two different alternatives have been explored to perform the required image processing: a specific purpose algorithm to extract edge detection information, and a cellular neural network with the suitable template. Their implementations in reconfigurable hardware pursue to take advantage of the performance and flexibility that show modern FPGAs. This paper describes the hardware implementation of both the Canny algorithm and the cellular neural network, and the overall system architecture. Results of the implementations and examples of the system functionality are presented.

  10. The effect of music relaxation versus progressive muscular relaxation on insomnia in older people and their relationship to personality traits.

    Science.gov (United States)

    Ziv, Naomi; Rotem, Tomer; Arnon, Zahi; Haimov, Iris

    2008-01-01

    A large percentage of older people suffer from chronic insomnia, affecting many aspects of life quality and well-being. Although insomnia is most often treated with medication, a growing number of studies demonstrate the efficiency of various relaxation techniques. The present study had three aims: first, to compare two relaxation techniques--music relaxation and progressive muscular relaxation--on various objective and subjective measures of sleep quality; second, to examine the effect of these techniques on anxiety and depression; and finally, to explore possible relationships between the efficiency of both techniques and personality variables. Fifteen older adults took part in the study. Following one week of base-line measurements of sleep quality, participants followed one week of music relaxation and one week of progressive muscular relaxation before going to sleep. Order of relaxation techniques was controlled. Results show music relaxation was more efficient in improving sleep. Sleep efficiency was higher after music relaxation than after progressive muscular relaxation. Moreover, anxiety was lower after music relaxation. Progressive muscular relaxation was related to deterioration of sleep quality on subjective measures. Beyond differences between the relaxation techniques, extraverts seemed to benefit more from both music and progressive muscular relaxation. The advantage of non-pharmacological means to treat insomnia, and the importance of taking individual differences into account are discussed. PMID:18959456

  11. The effect of music relaxation versus progressive muscular relaxation on insomnia in older people and their relationship to personality traits.

    Science.gov (United States)

    Ziv, Naomi; Rotem, Tomer; Arnon, Zahi; Haimov, Iris

    2008-01-01

    A large percentage of older people suffer from chronic insomnia, affecting many aspects of life quality and well-being. Although insomnia is most often treated with medication, a growing number of studies demonstrate the efficiency of various relaxation techniques. The present study had three aims: first, to compare two relaxation techniques--music relaxation and progressive muscular relaxation--on various objective and subjective measures of sleep quality; second, to examine the effect of these techniques on anxiety and depression; and finally, to explore possible relationships between the efficiency of both techniques and personality variables. Fifteen older adults took part in the study. Following one week of base-line measurements of sleep quality, participants followed one week of music relaxation and one week of progressive muscular relaxation before going to sleep. Order of relaxation techniques was controlled. Results show music relaxation was more efficient in improving sleep. Sleep efficiency was higher after music relaxation than after progressive muscular relaxation. Moreover, anxiety was lower after music relaxation. Progressive muscular relaxation was related to deterioration of sleep quality on subjective measures. Beyond differences between the relaxation techniques, extraverts seemed to benefit more from both music and progressive muscular relaxation. The advantage of non-pharmacological means to treat insomnia, and the importance of taking individual differences into account are discussed.

  12. Googles Augmented-Reality-Game "Ingress"

    Directory of Open Access Journals (Sweden)

    Karl H. Stingeder

    2013-12-01

    Full Text Available Das an das "Geocoaching"-Spielprinzip erinnernde Augmented-­Reality-Game "Ingress" ist auf allen mit Android-Betriebssystem ausgestatteten Smartphones spielbar. Das Alleinstellungsmerkmal des Spiels ist gleich­zeitig auch das beste Patent-Rezept für bzw. gegen notorisches "Couch-Potato-ing": Das Game-Design des "Draußenspiels" erfordert jedoch stets die physische Anwesenheit der SpielerInnen am realen Ort des Geschehens, meist touristisch attraktive Sehenswürdigkeiten und architektonisch markante Plätze. Sobald "Ingress" per App am Smart­phone gestartet wird, stehen Interaktionen und Machtverhältnisse auf dem Handy-Display im Dreh- und Angelpunkt des Geschehens. Die Spielgrafik ist auf das Wesentliche reduziert und erinnert an die Optik von Videospielen der 80er Jahre. "Ingress" im Allgemeinen sowie "Magnus13", die erste von Google organisierte Fan-Veranstaltung Österreichs mit mehreren Hundert TeilnehmerInnen und ist mit einer "digitalen Schnitzeljagd" vergleichbar: Gemeinsam ist der klassischen "Schnitzeljagd" und dem digitalen "Schere-Schein-Papier" Prinzip von "Ingress" die tragende Rolle des im Spiel entstehenden Gemeinschaftsgefühls, welche in einer hohen Langzeitmotivation mündet. Trotz aller Euphorie, ob des unkonventionellen Augmented-Reality-Spielkonzepts und des in Folge der sozialen Dynamik außergewöhnlichen Sucht­potentials, ist angesichts von Edward Snowden und vielfältiger NSA-Abhörmaßnahmen, eine gesunde Portion Skepsis angebracht: Welchen Zweck erfüllt "Ingress"? Gibt es ein verhülltes "Mittel zum Zweck"? Welche Gefahren bestehen mit einer systematischen Auswertung des umfangreichen, ortsrelevanten Daten-Sammelsuriums? "Ingress" verdeutlicht trotz aller Risiken den soziokulturellen Bedeutungswandel des digitalen Spiels: Spiele per se und das Spiel als soziale Interaktion sind aktuell dabei, alle Bereiche unseres Lebens zu erfassen.

  13. Performance of a solar augmented heat pump

    Science.gov (United States)

    Bedinger, A. F. G.; Tomlinson, J. J.; Reid, R. L.; Chaffin, D. J.

    Performance of a residential size solar augmented heat pump is reported for the 1979-1980 heating season. The facility located in Knoxville, Tennessee, has a measured heat load coefficient of 339.5 watt/C (644 BTU/hr- F). The solar augmented heat pump system consists of 7.4 cu m of one inch diameter crushed limestone. The heat pump is a nominal 8.8 KW (2 1/2 ton) high efficiency unit. The system includes electric resistance heaters to give the option of adding thermal energy to the pebble bed storage during utility off-peak periods, thus offering considerable load management capability. A 15 KW electric resistance duct heater is used to add thermal energy to the pebble bin as required during off-peak periods. Hourly thermal performance and on site weather data was taken for the period November 1, 1979, to April 13, 1980. Thermal performance data consists of heat flow summations for all modes of the system, pebble bed temperatures, and space temperature. Weather data consists of dry bulb temperature, dew point temperature, total global insolation (in the plane of the collector), and wind speed and direction. An error analysis was performed and the least accurate of the measurements was determined to be the heat flow at 5%. Solar system thermal performance factor was measured to be 8.77. The heat pump thermal performance factor was 1.64. Total system seasonal performance factor was measured to be 1.66. Using a modified version of TRNSYS, the thermal performance of this system was simulated. When simulation results were compared with data collected onsite, the predicted heat flow and power consumption generally were within experimental accuracy.

  14. Mobile Cloud Computing: A Review on Smartphone Augmentation Approaches

    OpenAIRE

    Abolfazli, Saeid; Sanaei, Zohreh; Gani, Abdullah

    2012-01-01

    Smartphones have recently gained significant popularity in heavy mobile processing while users are increasing their expectations toward rich computing experience. However, resource limitations and current mobile computing advancements hinder this vision. Therefore, resource-intensive application execution remains a challenging task in mobile computing that necessitates device augmentation. In this article, smartphone augmentation approaches are reviewed and classified in two main groups, name...

  15. Maxillary sinus augmentation with microstructured tricalcium phosphate ceramic in sheep.

    NARCIS (Netherlands)

    Klijn, R.J.; Hoekstra, J.W.M.; Beucken, J.J.J.P van den; Meijer, G.J.; Jansen, J.B.M.J.

    2012-01-01

    OBJECTIVE: The objective of this study was to evaluate the biological performance of osteoinductive microstructured tricalcium phosphate (MSTCP) particles in maxillary sinus floor augmentation surgery in sheep. MATERIAL AND METHODS: Sinus floor augmentation was performed in eight Swifter sheep. In e

  16. Augmenting a Child's Reality: Using Educational Tablet Technology

    Science.gov (United States)

    Tanner, Patricia; Karas, Carly; Schofield, Damian

    2014-01-01

    This study investigates the classroom integration of an innovative technology, augmented reality. Although the process of adding new technologies into a classroom setting can be daunting, the concept of augmented reality has demonstrated the ability to educate students and to assist with their comprehension of a procedural task. One half of the…

  17. 14 CFR 91.1061 - Augmented flight crews.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Augmented flight crews. 91.1061 Section 91...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Fractional Ownership Operations Program Management § 91.1061 Augmented flight crews. (a) No program manager may assign any...

  18. Routine sensor-augmented pump therapy in type 1 diabetes

    DEFF Research Database (Denmark)

    Nørgaard, Kirsten; Scaramuzza, Andrea; Bratina, Natasa;

    2013-01-01

    Sensor-augmented pump (SAP) therapy can improve glycemic control, compared with multiple daily insulin injections or with insulin pump therapy alone, without increasing the risk of hypoglycemia.......Sensor-augmented pump (SAP) therapy can improve glycemic control, compared with multiple daily insulin injections or with insulin pump therapy alone, without increasing the risk of hypoglycemia....

  19. Sensor-augmented pump therapy at 36 months

    DEFF Research Database (Denmark)

    Schmidt, Signe; Nørgaard, Kirsten

    2012-01-01

    This follow-up study investigates the metabolic and psychosocial effects of sensor-augmented pump (SAP) therapy in adults with type 1 diabetes 36 months after therapy start.......This follow-up study investigates the metabolic and psychosocial effects of sensor-augmented pump (SAP) therapy in adults with type 1 diabetes 36 months after therapy start....

  20. Intravenous alpha-1 antitrypsin augmentation therapy: systematic review

    DEFF Research Database (Denmark)

    Gøtzsche, Peter C; Johansen, Helle Krogh

    2010-01-01

    We reviewed the benefits and harms of augmentation therapy with alpha-1 antitrypsin in patients with alpha-1 antitrypsin deficiency and lung disease. We searched for randomised trials comparing augmentation therapy with placebo or no treatment in PubMed and ClinicalTrials (7 January 2010). Two...

  1. Augmentative biological control of arthropods in Latin America

    NARCIS (Netherlands)

    Lenteren, van J.C.; Bueno, V.H.P.

    2003-01-01

    Augmentative forms of biological control, where natural enemies are periodically introduced, are applied over large areas in various cropping systems in Latin America. About 25% of the world area under augmentative control is situated in this region. Well-known examples are the use of species of the

  2. Pose estimation for mobile devices and augmented reality

    NARCIS (Netherlands)

    Caarls, J.

    2009-01-01

    In this thesis we introduce the reader to the field of Augmented Reality (AR) and describe aspects of an AR system. We show the current uses in treatment of phobias, games, sports and industry. We present the challenges for Optical See-Through Augmented Reality in which the real world is perceived n

  3. On Location Learning: Authentic Applied Science with Networked Augmented Realities

    Science.gov (United States)

    Rosenbaum, Eric; Klopfer, Eric; Perry, Judy

    2007-01-01

    The learning of science can be made more like the practice of science through authentic simulated experiences. We have created a networked handheld Augmented Reality environment that combines the authentic role-playing of Augmented Realities and the underlying models of Participatory Simulations. This game, known as Outbreak @ The Institute, is…

  4. Augmented Reality, the Future of Contextual Mobile Learning

    Science.gov (United States)

    Sungkur, Roopesh Kevin; Panchoo, Akshay; Bhoyroo, Nitisha Kirtee

    2016-01-01

    Purpose: This study aims to show the relevance of augmented reality (AR) in mobile learning for the 21st century. With AR, any real-world environment can be augmented by providing users with accurate digital overlays. AR is a promising technology that has the potential to encourage learners to explore learning materials from a totally new…

  5. The Local Games Lab ABQ: Homegrown Augmented Reality

    Science.gov (United States)

    Holden, Christopher

    2014-01-01

    Experiments in the use of augmented reality games formerly required extensive material resources and expertise to implement above and beyond what might be possible within the usual educational contexts. Currently, the more common availability of hardware in these contexts and the existence of easy-to-use, general purpose augmented reality design…

  6. Complications 15 years after breast augmentation with polyacrylamide

    DEFF Research Database (Denmark)

    Ghasemi, Habib; Damsgaard, Tine Engberg; Stolle, Lars Bjørn;

    2015-01-01

    Polyacrylamide hydrogel (PAAG) has been used as an injectable, permanent filler for soft-tissue augmentation for more than two decades. Several complications have been reported worldwide. In this case report, we present a woman with long-term complications 15 years after bilateral breast...... augmentation with PAAG injections....

  7. Augmenting cognition: Reviewing the symbiotic relation between man and machine

    NARCIS (Netherlands)

    Greef, T.E. de; Dongen, C.J.G. van; Grootjen, M.; Lindenberg, J.

    2007-01-01

    One of the goals of augmented cognition is creation of adaptive human-machine collaboration that continually optimizes performance of the human-machine system. Augmented Cognition aims to compensate for temporal limitations in human information processing, for instance in the case of overload, cogni

  8. RECONSTRUCTION OF TOLLANXICOCOTITLAN CITY BY AUGMENTED REALITY (EXTENDED)

    OpenAIRE

    M. en C. Martha Rosa Cordero Lopez; M. en C. Marco Antonio Dorantes Gonzalez

    2014-01-01

    Work In Terminal presents the analysis, design, implementation and results of Reconstruction Xicocotitlan Tollan-through augmented reality (Extended), which will release information about the Toltec capital supplemented by presenting an overview of the main premises of the Xicocotitlan Tollan city supported dimensional models based on the augmented reality technique showing the user a virtual representation of buildings in Tollan phase.

  9. Potential Use of Augmented Reality in LIS Education

    Science.gov (United States)

    Wójcik, Magdalena

    2016-01-01

    The subject of this article is the use of augmented reality technology in library and information science education. The aim is to determine the scope and potential uses of augmented reality in the education of information professionals. In order to determine the scope and forms of potential use of AR technology in LIS education a two-step…

  10. ARLearn: Learning activities and interaction in augmented reality

    NARCIS (Netherlands)

    Ternier, Stefaan; Tabuenca, Bernardo; Specht, Marcus

    2013-01-01

    Ternier, S., Tabuenca, B., & Specht, M. (2012). ARLearn: Learning activities and interaction in augmented reality. In M. Specht, J. Multisilta, & M. Sharples (Eds.), Proceedings of the Mobile Augmented Reality for Education Workshop (pp. 10-13). October, 16-17, 2012, Helsinki, Finland.

  11. Prevalence of sinus augmentation associated with maxillary posterior implants.

    Science.gov (United States)

    Seong, Wook-Jin; Barczak, Michael; Jung, Jae; Basu, Saonli; Olin, Paul S; Conrad, Heather J

    2013-12-01

    Pneumatization of the maxillary sinus limits the quantity of alveolar bone available for implant placement and may result in a lack of primary stability and difficulty in achieving osseointegration. The purpose of this study was to retrospectively analyze a group of patients who had implants placed in the posterior maxilla, calculate the prevalence of sinus augmentation, and identify factors related to sinus augmentation. With institutional review board approval, dental records from a population of patients who had implants placed in the maxillary posterior region between January 2000 and December 2004 were used to create a database. Independent variables were classified as continuous (age of the patient at stage 1 implant surgery [S1], time between extraction and S1, time between extraction and sinus augmentation, and time between sinus augmentation and S1) and categorical (gender, implant failure, American Society of Anesthesiologists system classification, smoking, osteoporosis, residual crestal bone height, implant position, implant proximity, prostheses type, and implant diameter and length). The dependent variable was the incidence of a sinus augmentation procedure. Simple logistic regression was used to assess the influence of each factor on the presence of sinus augmentation (P rate of 93.2% over a mean follow-up period of 35.7 months. Of 502 implants, 272 (54.2%) were associated with a sinus augmentation procedure. Among variables, residual crestal bone height (P edentulism. Sinus augmentation was significantly associated with implant failure and wide implants. PMID:21651386

  12. TOLLAN-XICOCOTITLAN: A RECONSTRUCTED CITY BY AUGMENTED REALITY (EXTENDED

    Directory of Open Access Journals (Sweden)

    M. en C. Martha Rosa Cordero López

    2014-10-01

    Full Text Available Work In Terminal presents the analysis, design, implementation and results of Reconstruction Xicocotitlan Tollan-through augmented reality (Extended, which will release information about the Toltec capital supplemented by presenting an overview of the main premises of the Xicocotitlan Tollan city supported dimensional models based on the augmented reality technique showing the user a virtual representation of buildings in Tollan phase.

  13. RECONSTRUCTION OF TOLLANXICOCOTITLAN CITY BY AUGMENTED REALITY (EXTENDED

    Directory of Open Access Journals (Sweden)

    M. en C. Martha Rosa Cordero Lopez

    2014-05-01

    Full Text Available Work In Terminal presents the analysis, design, implementation and results of Reconstruction Xicocotitlan Tollan-through augmented reality (Extended, which will release information about the Toltec capital supplemented by presenting an overview of the main premises of the Xicocotitlan Tollan city supported dimensional models based on the augmented reality technique showing the user a virtual representation of buildings in Tollan phase.

  14. Hoe maak je gebruik van augmented reality in het onderwijs

    OpenAIRE

    Ternier, Stefaan; Kester, Liesbeth; Schmitz, Birgit; Kluijfhout, Eric; Wolff, Charlotte; Maassen, Marcel; Gijselaers, Jérôme; Berkhout, Jeroen; Storm, Jeroen; Roks, Sabine

    2013-01-01

    Ternier, S., Kester, L., Wolff, C., Maasen, M., Gijselaers, J., Berkhout, J., & Storm, J. (2012, 16 November). Hoe maak je gebruik van augmented reality in het onderwijs. Masterclass in de OpenU community Open Universiteit, Heerlen, Nederland. Beschikbaar op http://portal.ou.nl/web/augmented-reality-in-het-onderwijs/

  15. Hoe maak je gebruik van augmented reality in het onderwijs

    NARCIS (Netherlands)

    Ternier, Stefaan; Kester, Liesbeth; Schmitz, Birgit; Kluijfhout, Eric; Wolff, Charlotte; Maassen, Marcel; Gijselaers, Jérôme; Berkhout, Jeroen; Storm, Jeroen; Roks, Sabine

    2013-01-01

    Ternier, S., Kester, L., Wolff, C., Maasen, M., Gijselaers, J., Berkhout, J., & Storm, J. (2012, 16 November). Hoe maak je gebruik van augmented reality in het onderwijs. Masterclass in de OpenU community Open Universiteit, Heerlen, Nederland. Beschikbaar op http://portal.ou.nl/web/augmented-realit

  16. Augmented Reality as a Countermeasure for Sleep Deprivation.

    Science.gov (United States)

    Baumeister, James; Dorrlan, Jillian; Banks, Siobhan; Chatburn, Alex; Smith, Ross T; Carskadon, Mary A; Lushington, Kurt; Thomas, Bruce H

    2016-04-01

    Sleep deprivation is known to have serious deleterious effects on executive functioning and job performance. Augmented reality has an ability to place pertinent information at the fore, guiding visual focus and reducing instructional complexity. This paper presents a study to explore how spatial augmented reality instructions impact procedural task performance on sleep deprived users. The user study was conducted to examine performance on a procedural task at six time points over the course of a night of total sleep deprivation. Tasks were provided either by spatial augmented reality-based projections or on an adjacent monitor. The results indicate that participant errors significantly increased with the monitor condition when sleep deprived. The augmented reality condition exhibited a positive influence with participant errors and completion time having no significant increase when sleep deprived. The results of our study show that spatial augmented reality is an effective sleep deprivation countermeasure under laboratory conditions. PMID:26780802

  17. PARAMETERS OF AUGMENTED REALITY AND ITS USE IN EDUCATION

    Directory of Open Access Journals (Sweden)

    JEŘÁBEK, Tomáš

    2013-12-01

    Full Text Available This article examines the issue of augmented reality and possibilities of its application in education. It briefly reports on selected results of a broader survey focused on technological, psychological, physiological and didactical aspects of the issue. It presumes that augmented reality has its unique place in technical teaching tools since it is a technological-perception concept, which in certain didactical situations creates more suitable perceptual environment than real environment itself on one hand, or virtual environment on the other. It focuses on identification of the technological-functional properties and specifics of augmented reality systems and on verification of model examples of augmented reality applications in school practice. It characterizes the course and results of empirical research project based on a descriptive case study exploring the cases of implementing selected application solutions of augmented reality into learning experience in accordance with the model of pro-active action research.

  18. Augmented Reality as a Countermeasure for Sleep Deprivation.

    Science.gov (United States)

    Baumeister, James; Dorrlan, Jillian; Banks, Siobhan; Chatburn, Alex; Smith, Ross T; Carskadon, Mary A; Lushington, Kurt; Thomas, Bruce H

    2016-04-01

    Sleep deprivation is known to have serious deleterious effects on executive functioning and job performance. Augmented reality has an ability to place pertinent information at the fore, guiding visual focus and reducing instructional complexity. This paper presents a study to explore how spatial augmented reality instructions impact procedural task performance on sleep deprived users. The user study was conducted to examine performance on a procedural task at six time points over the course of a night of total sleep deprivation. Tasks were provided either by spatial augmented reality-based projections or on an adjacent monitor. The results indicate that participant errors significantly increased with the monitor condition when sleep deprived. The augmented reality condition exhibited a positive influence with participant errors and completion time having no significant increase when sleep deprived. The results of our study show that spatial augmented reality is an effective sleep deprivation countermeasure under laboratory conditions.

  19. Computational modelling of bone augmentation in the spine

    Directory of Open Access Journals (Sweden)

    Sandro D. Badilatti

    2015-10-01

    Full Text Available Computational models are gaining importance not only for basic science, but also for the analysis of clinical interventions and to support clinicians prior to intervention. Vertebroplasty has been used to stabilise compression fractures in the spine for years, yet there are still diverging ideas on the ideal deposition location, volume, and augmentation material. In particular, little is known about the long-term effects of the intervention on the surrounding biological tissue. This review aims to investigate computational efforts made in the field of vertebroplasty, from the augmentation procedure to strength prediction and long-term in silico bone biology in augmented human vertebrae. While there is ample work on simulating the augmentation procedure and strength prediction, simulations predicting long-term effects are lacking. Recent developments in bone remodelling simulations have the potential to show adaptation to cement augmentation and, thus, close this gap.

  20. MODELING CHARGE RELAXATION ON SURFACES OF PARTICLES SUSPENDED IN LIQUID

    Institute of Scientific and Technical Information of China (English)

    Guoqing Gu; Kin Wah Yu

    2005-01-01

    A general theory on charges relaxation process in particle-fluid systems is introduced in this article. The method to derive analytical solutions for the charge relaxation equation is illustrated, and some respects for this theory are discussed in detail.

  1. Relaxations and bonding mechanism of arsenic in-situ impurities in MCT: first-principles study

    Institute of Scientific and Technical Information of China (English)

    SUN Li-zhong; ZHONG Xiang-li; WANG Jin-bin; CHEN Xiao-shuang; LU Wei

    2006-01-01

    The structural and electronic properties of the arsenic in-situ impurity in Hg1-xCdxTe(MCT) were studied by combining the full-potential linear augmented plane wave (FP-LAPW) and plane-wave pseudopotential methods base on the density functional theory. Structural relaxations, local charge density, densities of states are computed to investigate the effects of the impurity on the electronic structure. The bonding characteristics between the impurity and the host atoms are discussed by analysis of the valence charge density and the bonding charge density. The amphoteric behavior of arsenic impurity in MCT has been shown. The defect levels introduced by the in-situ arsenic impurities are determined by the single-particle electron energy calculations, which are in good agreement with the experimental results.

  2. Relaxation of Magnetic Nanoparticle Chain without Applied Field*

    Institute of Scientific and Technical Information of China (English)

    HE Liang-Ming

    2011-01-01

    The relaxation ofa one-dimensional magnetic nanoparticle linear chain with lattice constant a is investigated in absence of applied field. There is an equilibrium state (or steady state) where all magnetic moments of particles lie along the chain (x-axis), back to which the magnetic nanoparticle chain at other state will relax. It is found that the relaxation time Tx is determined by Tx = 10β × a3. This relaxation is compared with that of single magnetic nanoparticle system.

  3. Multi-region relaxed magnetohydrodynamics with flow

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, G. R., E-mail: graham.dennis@anu.edu.au; Dewar, R. L.; Hole, M. J. [Research School of Physics and Engineering, Australian National University, ACT 0200 (Australia); Hudson, S. R. [Princeton Plasma Physics Laboratory, PO Box 451, Princeton, New Jersey 08543 (United States)

    2014-04-15

    We present an extension of the multi-region relaxed magnetohydrodynamics (MRxMHD) equilibrium model that includes plasma flow. This new model is a generalization of Woltjer's model of relaxed magnetohydrodynamics equilibria with flow. We prove that as the number of plasma regions becomes infinite, our extension of MRxMHD reduces to ideal MHD with flow. We also prove that some solutions to MRxMHD with flow are not time-independent in the laboratory frame, and instead have 3D structure which rotates in the toroidal direction with fixed angular velocity. This capability gives MRxMHD potential application to describing rotating 3D MHD structures such as 'snakes' and long-lived modes.

  4. Relaxation Based Electrical Simulation for VLSI Circuits

    Directory of Open Access Journals (Sweden)

    S. Rajkumar

    2012-06-01

    Full Text Available Electrical circuit simulation was one of the first CAD tools developed for IC design. The conventional circuit simulators like SPICE and ASTAP were designed initially for the cost effective analysis of circuits containing a few hundred transistors or less. A number of approaches have been used to improve the performances of congenital circuit simulators for the analysis of large circuits. Thereafter relaxation methods was proposed to provide more accurate waveforms than standard circuit simulators with up to two orders of magnitude speed improvement for large circuits. In this paper we have tried to highlights recently used waveform and point relaxation techniques for simulation of VLSI circuits. We also propose a simple parallelization technique and experimentally demonstrate that we can solve digital circuits with tens of million transistors in a few hours.

  5. Energy relaxation of a dissipative quantum oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Pradeep; Pollak, Eli [Chemical Physics Department, Weizmann Institute of Science, 76100 Rehovot (Israel)

    2014-12-21

    The dissipative harmonic oscillator is studied as a model for vibrational relaxation in a liquid environment. Continuum limit expressions are derived for the time-dependent average energy, average width of the population, and the vibrational population itself. The effect of the magnitude of the solute-solvent interaction, expressed in terms of a friction coefficient, solvent temperature, and initial energy of the oscillator on the relaxation has been studied. These results shed light on the recent femtosecond stimulated Raman scattering probe of the 1570 cm{sup −1} −C=C− stretching mode of trans-Stilbene in the first (S{sub 1}) excited electronic state. When the oscillator is initially cold with respect to the bath temperature, its average energy and width increase in time. When it is initially hot, the average energy and width decrease with time in qualitative agreement with the experimental observations.

  6. Two-temperature reaction and relaxation rates

    Science.gov (United States)

    Kolesnichenko, E.; Gorbachev, Yu.

    2016-09-01

    Within the method of solving the kinetic equations for gas mixtures with internal degrees of freedom developed by the authors and based on the approximate summational invariants (ASI) concept, gas-dynamic equations for a multi-temperature model for the spatially inhomogeneous case are derived. For the two-temperature case, the expressions for the non-equilibrium reaction and relaxation rates are obtained. Special attention is drawn to corresponding thermodynamic equations. Different possibilities of introducing the gas-dynamic variables related to the internal degrees of freedom are considered. One is based on the choice of quantum numbers as the ASI, while the other is based on the choice of internal (vibrational) energy as the ASI. Limits to a one-temperature situation are considered in all the cases. For the cutoff harmonic oscillator model, explicit expressions for the reaction and relaxation rates are derived.

  7. Multi-region relaxed magnetohydrodynamics with flow

    CERN Document Server

    Dennis, G R; Dewar, R L; Hole, M J

    2014-01-01

    We present an extension of the multi-region relaxed magnetohydrodynamics (MRxMHD) equilibrium model that includes plasma flow. This new model is a generalization of Woltjer's model of relaxed magnetohydrodynamics equilibria with flow. We prove that as the number of plasma regions becomes infinite our extension of MRxMHD reduces to ideal MHD with flow. We also prove that some solutions to MRxMHD with flow are not time-independent in the laboratory frame, and instead have 3D structure which rotates in the toroidal direction with fixed angular velocity. This capability gives MRxMHD potential application to describing rotating 3D MHD structures such as 'snakes' and long-lived modes.

  8. Electrochemical relaxation at electrically conducting polymers

    Science.gov (United States)

    Nateghi, M. R.; zarandi, M. B.

    2008-08-01

    In this study, slow relaxation (SR) associated with the electroreduction of polyaniline (PAn) films during polarization to high cathodic potentials was investigated by cyclic voltammetry technique. Anodic voltammetric currents were used as experimental variable to indicate the relaxation occurring in PAn films deposited electrochemically on the Pt electrode surface. The dependence of SR on polymer film thickness, waiting potential, and mobility of the doped anion was investigated. Percolation threshold potential for heteropolyanion doped PAn was estimated to be between 150 and 200 mV depending on polymer thickness on the electrode surface. A new model of the conducting to insulating conversion is described by the percolation theory and mobility gap changes during the process.

  9. Electrochemical relaxation at electrically conducting polymers

    Energy Technology Data Exchange (ETDEWEB)

    Nateghi, M R [Department of Chemistry, Islamic Azad University, Yazd-Branch, Yazd (Iran, Islamic Republic of); Zarandi, M B [Department of physics, Yazd University, Yazd (Iran, Islamic Republic of)

    2008-08-15

    In this study, slow relaxation (SR) associated with the electroreduction of polyaniline (PAn) films during polarization to high cathodic potentials was investigated by cyclic voltammetry technique. Anodic voltammetric currents were used as experimental variable to indicate the relaxation occurring in PAn films deposited electrochemically on the Pt electrode surface. The dependence of SR on polymer film thickness, waiting potential, and mobility of the doped anion was investigated. Percolation threshold potential for heteropolyanion doped PAn was estimated to be between 150 and 200 mV depending on polymer thickness on the electrode surface. A new model of the conducting to insulating conversion is described by the percolation theory and mobility gap changes during the process.

  10. Braided magnetic fields: equilibria, relaxation and heating

    Science.gov (United States)

    Pontin, D. I.; Candelaresi, S.; Russell, A. J. B.; Hornig, G.

    2016-05-01

    We examine the dynamics of magnetic flux tubes containing non-trivial field line braiding (or linkage), using mathematical and computational modelling, in the context of testable predictions for the laboratory and their significance for solar coronal heating. We investigate the existence of braided force-free equilibria, and demonstrate that for a field anchored at perfectly-conducting plates, these equilibria exist and contain current sheets whose thickness scales inversely with the braid complexity—as measured for example by the topological entropy. By contrast, for a periodic domain braided exact equilibria typically do not exist, while approximate equilibria contain thin current sheets. In the presence of resistivity, reconnection is triggered at the current sheets and a turbulent relaxation ensues. We finish by discussing the properties of the turbulent relaxation and the existence of constraints that may mean that the final state is not the linear force-free field predicted by Taylor’s hypothesis.

  11. Relaxation mechanism of the hydrated electron.

    Science.gov (United States)

    Elkins, Madeline H; Williams, Holly L; Shreve, Alexander T; Neumark, Daniel M

    2013-12-20

    The relaxation dynamics of the photoexcited hydrated electron have been subject to conflicting interpretations. Here, we report time-resolved photoelectron spectra of hydrated electrons in a liquid microjet with the aim of clarifying ambiguities from previous experiments. A sequence of three ultrashort laser pulses (~100 femtosecond duration) successively created hydrated electrons by charge-transfer-to-solvent excitation of dissolved anions, electronically excited these electrons via the s→p transition, and then ejected them into vacuum. Two distinct transient signals were observed. One was assigned to the initially excited p-state with a lifetime of ~75 femtoseconds, and the other, with a lifetime of ~400 femtoseconds, was attributed to s-state electrons just after internal conversion in a nonequilibrated solvent environment. These assignments support the nonadiabatic relaxation model. PMID:24357314

  12. Relaxation times and charge conductivity of silicene

    Science.gov (United States)

    Mazloom, Azadeh; Parhizgar, Fariborz; Abedinpour, Saeed H.; Asgari, Reza

    2016-07-01

    We investigate the transport and single particle relaxation times of silicene in the presence of neutral and charged impurities. The static charge conductivity is studied using the semiclassical Boltzmann formalism when the spin-orbit interaction is taken into account. The screening is modeled within Thomas-Fermi and random-phase approximations. We show that the transport relaxation time is always longer than the single particle one. Easy electrical controllability of both carrier density and band gap in this buckled two-dimensional structure makes it a suitable candidate for several electronic and optoelectronic applications. In particular, we observe that the dc charge conductivity could be easily controlled through an external electric field, a very promising feature for applications as electrical switches and transistors. Our findings would be qualitatively valid for other buckled honeycomb lattices of the same family, such as germanine and stanine.

  13. Braided magnetic fields: equilibria, relaxation and heating

    CERN Document Server

    Pontin, D I; Russell, A J B; Hornig, G

    2015-01-01

    We examine the dynamics of magnetic flux tubes containing non-trivial field line braiding (or linkage), using mathematical and computational modelling. The key results obtained from recent modelling efforts are summarised, in the context of testable predictions for the laboratory. We discuss the existence of braided force-free equilibria, and demonstrate that for a field anchored at perfectly-conducting plates, these equilibria exist and contain current sheets whose thickness scales inversely with the braid complexity - as measured for example by the topological entropy. By contrast, for a periodic domain braided exact equilibria typically do not exist, while approximate equilibria contain thin current sheets. In the presence of resistivity, reconnection is triggered at the current sheets and a turbulent relaxation ensues. We discuss the properties of this relaxation, and in particular the existence of constraints that may mean that the final state is not the linear force-free field predicted by Taylor's hypo...

  14. Relaxation of quantum states under energy perturbations

    CERN Document Server

    Brody, D; Syroka, J; Brody, Dorje; Hughston, Lane; Syroka, Joanna

    2002-01-01

    The energy-based stochastic extension of the Schrodinger equation is perhaps the simplest mathematically rigourous and physically plausible model for the reduction of the wave function. In this article we apply a new simulation methodology for the stochastic framework to analyse formulae for the dynamics of a particle confined to a square-well potential. We consider the situation when the width of the well is expanded instantaneously. Through this example we are able to illustrate in detail how a quantum system responds to an energy perturbation, and the mechanism, according to the stochastic evolutionary law, by which the system relaxes spontaneously into one of the stable eigenstates of the Hamiltonian. We examine in particular how the expectation value of the Hamiltonian and the probability distribution for the position of the particle change in time. An analytic expression for the typical timescale of relaxation is derived. We also consider the small perturbation limit, and discuss the relation between th...

  15. Modeling Aftershocks as a Stretched Exponential Relaxation

    CERN Document Server

    Mignan, Arnaud

    2015-01-01

    The decay rate of aftershocks has been modeled as a power law since the pioneering work of Omori in the late nineteenth century. Considered the second most fundamental empirical law after the Gutenberg-Richter relationship, the power law paradigm has rarely been challenged by the seismological community. By taking a view of aftershock research not biased by prior conceptions of Omori power law decay and by applying statistical methods recommended in applied mathematics, I show that all aftershock sequences tested in three regional earthquake catalogs (Southern and Northern California, Taiwan) and with three declustering techniques (nearest-neighbor, second-order moment, window methods) follow a stretched exponential instead of a power law. These results infer that aftershocks are due to a simpler relaxation process than originally thought, in accordance with most other relaxation processes observed in Nature.

  16. Progressive Relaxation Training: A Manual for the Helping Professions.

    Science.gov (United States)

    Bernstein, Douglas A.; Borkovec, Thomas D.

    This manual sets forth in detail the therapist behaviors necessary for effective application of this relaxation training technique. The materials presented are designed to provide therapists in many disciplines with the skills they need to train their clients in relaxation. A background to relaxation training is presented, and the basic procedures…

  17. RELAXATION TIME LIMITS PROBLEM FOR HYDRODYNAMIC MODELS IN SEMICONDUCTOR SCIENCE

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this article, two relaxation time limits, namely, the momentum relaxation time limit and the energy relaxation time limit are considered. By the compactness argument, it is obtained that the smooth solutions of the multidimensional nonisentropic Euler-Poisson problem converge to the solutions of an energy transport model or a drift diffusion model, respectively, with respect to different time scales.

  18. Models of Flux Tubes from Constrained Relaxation

    Indian Academy of Sciences (India)

    Α. Mangalam; V. Krishan

    2000-09-01

    We study the relaxation of a compressible plasma to an equilibrium with flow. The constraints of conservation of mass, energy, angular momentum, cross-helicity and relative magnetic helicity are imposed. Equilibria corresponding to the energy extrema while conserving these invariants for parallel flows yield three classes of solutions and one of them with an increasing radial density profile, relevant to solar flux tubes is presented.

  19. Muon spin relaxation in random spin systems

    International Nuclear Information System (INIS)

    The longitudinal relaxation function Gsub(z)(t) of the positive muon can reflect dynamical characters of local field in a unique way even when the correlation time is longer than the Larmor period of local field. This method has been applied to studies of spin dynamics in spin glass systems, revealing sharp but continuous temperature dependence of the correlation time. Its principle and applications are reviewed. (author)

  20. Relaxation, Structure, and Properties of Semicoherent Interfaces

    Science.gov (United States)

    Shao, S.; Wang, J.

    2016-01-01

    Materials containing a high density of interfaces are promising candidates for future energy technologies because interfaces acting as sources, sinks, and barriers for defects can improve mechanical and irradiation properties of materials. A semicoherent interface widely occurring in various materials is composed of a network of misfit dislocations and coherent regions separated by misfit dislocations. In this article, we review the relaxation mechanisms, structure, and properties of (111) semicoherent interfaces in face-centered cubic structures.

  1. Enhancement of microcavity polariton relaxation under confinement

    OpenAIRE

    Paraïso, Taofiq; Sarchi, Davide; Nardin, Gaël; Cerna, Roland; Leger, Yoan; Pietka, Barbara; Richard, Maxime; El Daïf, Ounsi; Morier-Genoud, Francois; Savona, Vincenzo; Deveaud-Plédran, Benoit

    2009-01-01

    We experimentally investigate the relaxation of spatially confined microcavity polaritons. We measure the time- and energy-resolved photoluminescence under resonant excitation and in the low-density regime. In this way, we have access to the time evolution of the energy distribution of the polariton population. We show that, when one confined level is resonantly excited, after an initial transient, the population of the confined levels is thermally distributed. The reported efficiency of the ...

  2. Relaxation of Surface Profiles by Evaporation Dynamics

    OpenAIRE

    Hager, Johannes

    1997-01-01

    We present simulations of the relaxation towards equilibrium of one dimensional steps and sinusoidal grooves imprinted on a surface below its roughening transition. We use a generalization of the hypercube stacking model of Forrest and Tang, that allows for temperature dependent next-nearest-neighbor interactions. For the step geometry the results at T=0 agree well with the t^(1/4) prediction of continuum theory for the spreading of the step. In the case of periodic profiles we modify the mob...

  3. Mirror World and Axion: Relaxing Cosmological Bounds

    CERN Document Server

    Maurizio, G

    2005-01-01

    The cosmological (upper) limit on the Peccei-Quinn constant, related to the primordial oscillations of the axion field, can be relaxed for a mirror axion model. The simple reason is that the mirror world is colder and so the behavior of the axion temperature-dependent mass is dominated by the contribution from the mirror sector. So the coherent oscillations start earlier and correspondingly the axion mass density \\Omega_a h^2 is reduced.

  4. Controlling spin relaxation with a cavity.

    Science.gov (United States)

    Bienfait, A; Pla, J J; Kubo, Y; Zhou, X; Stern, M; Lo, C C; Weis, C D; Schenkel, T; Vion, D; Esteve, D; Morton, J J L; Bertet, P

    2016-03-01

    Spontaneous emission of radiation is one of the fundamental mechanisms by which an excited quantum system returns to equilibrium. For spins, however, spontaneous emission is generally negligible compared to other non-radiative relaxation processes because of the weak coupling between the magnetic dipole and the electromagnetic field. In 1946, Purcell realized that the rate of spontaneous emission can be greatly enhanced by placing the quantum system in a resonant cavity. This effect has since been used extensively to control the lifetime of atoms and semiconducting heterostructures coupled to microwave or optical cavities, and is essential for the realization of high-efficiency single-photon sources. Here we report the application of this idea to spins in solids. By coupling donor spins in silicon to a superconducting microwave cavity with a high quality factor and a small mode volume, we reach the regime in which spontaneous emission constitutes the dominant mechanism of spin relaxation. The relaxation rate is increased by three orders of magnitude as the spins are tuned to the cavity resonance, demonstrating that energy relaxation can be controlled on demand. Our results provide a general way to initialize spin systems into their ground state and therefore have applications in magnetic resonance and quantum information processing. They also demonstrate that the coupling between the magnetic dipole of a spin and the electromagnetic field can be enhanced up to the point at which quantum fluctuations have a marked effect on the spin dynamics; as such, they represent an important step towards the coherent magnetic coupling of individual spins to microwave photons. PMID:26878235

  5. Dimension reduction for systems with slow relaxation

    CERN Document Server

    Venkataramani, Shankar C; Restrepo, Juan M

    2016-01-01

    We develop reduced, stochastic models for high dimensional, dissipative dynamical systems that relax very slowly to equilibrium and can encode long term memory. We present a variety of empirical and first principles approaches for model reduction, and build a mathematical framework for analyzing the reduced models. We introduce the notions of universal and asymptotic filters to characterize `optimal' model reductions. We discuss how our methods apply to the practically important problem of modeling oil spills.

  6. Relaxation time measurements by an electronic method.

    Science.gov (United States)

    Brousseau, R.; Vanier, J.

    1973-01-01

    Description of a simple electronic system that permits the direct measurement of time constants of decaying signals. The system was used in connection with relaxation experiments on hydrogen and rubidium masers and was found to operate well. The use of a computing counter in the systems gives the possibility of making averages on several experiments and obtaining the standard deviation of the results from the mean. The program for the computing counter is given.

  7. Plasma Relaxation and Topological Aspects in Electronmagnetohydrodynamics

    OpenAIRE

    Shivamoggi, B. K.

    2016-01-01

    Parker's formulation of isotopological plasma relaxation process toward minimum magnetics energy states in magnetohydrodynamics (MHD) is extended to electron MHD (EMHD). The lower bound on magnetic energy in EMHD is determined by both the magnetic field and the electron vorticity field topologies, and is shown to be reduced further in EMHD by an amount proportional to the sum of total electron-flow kinetic energy and total electron-flow enstrophy. The EMHD Beltrami condition becomes equivalen...

  8. Augmented robotic device for EVA hand manoeuvres

    Science.gov (United States)

    Matheson, Eloise; Brooker, Graham

    2012-12-01

    During extravehicular activities (EVAs), pressurised space suits can lead to difficulties in performing hand manoeuvres and fatigue. This is often the cause of EVAs being terminated early, or taking longer to complete. Assistive robotic gloves can be used to augment the natural motion of a human hand, meaning work can be carried out more efficiently with less stress to the astronaut. Lightweight and low profile solutions must be found in order for the assistive robotic glove to be easily integrated with a space suit pressure garment. Pneumatic muscle actuators combined with force sensors are one such solution. These actuators are extremely light, yet can output high forces using pressurised gases as the actuation drive. Their movement is omnidirectional, so when combined with a flexible exoskeleton that itself provides a degree of freedom of movement, individual fingers can be controlled during flexion and extension. This setup allows actuators and other hardware to be stored remotely on the user's body, resulting in the least possible mass being supported by the hand. Two prototype gloves have been developed at the University of Sydney; prototype I using a fibreglass exoskeleton to provide flexion force, and prototype II using torsion springs to achieve the same result. The gloves have been designed to increase the ease of human movements, rather than to add unnatural ability to the hand. A state space control algorithm has been developed to ensure that human initiated movements are recognised, and calibration methods have been implemented to accommodate the different characteristics of each wearer's hands. For this calibration technique, it was necessary to take into account the natural tremors of the human hand which may have otherwise initiated unexpected control signals. Prototype I was able to actuate the user's hand in 1 degree of freedom (DOF) from full flexion to partial extension, and prototype II actuated a user's finger in 2 DOF with forces achieved

  9. Ionospheric Challenges for GNSS Based Augmentation Systems

    Science.gov (United States)

    Doherty, P.; Valladares, C. E.

    2007-12-01

    The ionosphere is a highly dynamic physical phenomenon that presents a variable source of error for Global Navigation Satellite System (GNSS) signals and GNSS based operational systems. The Federal Aviation Administration's (FAA) Wide-Area Augmentation System (WAAS) was designed to enhance the GNSS standard positioning service by providing additional accuracy, availability and integrity that is sufficient for use in commercial aviation. It is the first of a number of planned regional Satellite Based Augmentation Systems (SBAS). Other systems in development include the European EGNOS system, the MSAS system in Japan and the GAGAN system in India. In addition, the South American countries are investigating the feasibility of operating an SBAS system in this region. Much of the WAAS ionospheric research and development focused on defining and mitigating ionospheric challenges characteristic of the mid-latitude regions, where the ionosphere is well studied and relatively quiescent. The EGNOS and MSAS systems will primarily operate under a similarly quiescent mid-latitude ionosphere. SBAS system development in South America, India and other low-latitude regions, however, will have to contend with much more extreme conditions. These conditions include strong spatial and temporal gradients, plasma depletions and scintillation. All of these conditions have a potential to limit SBAS performance in the low latitude regions. This presentation will review the effects that the ionosphere has on the mid-latitude WAAS system. It will present the techniques that are used to mitigate ionospheric disturbances induced on the system during severe geomagnetic activity and it will quantify the effect that this activity has on system performance. The presentation will then present data from the South American Low-latitude Ionospheric Sensor Network (LISN) that can be used to infer the ionospheric effects on SBAS performance in the most challenging low-latitude ionospheric environment

  10. Graph Matching: Relax at Your Own Risk.

    Science.gov (United States)

    Lyzinski, Vince; Fishkind, Donniell E; Fiori, Marcelo; Vogelstein, Joshua T; Priebe, Carey E; Sapiro, Guillermo

    2016-01-01

    Graph matching-aligning a pair of graphs to minimize their edge disagreements-has received wide-spread attention from both theoretical and applied communities over the past several decades, including combinatorics, computer vision, and connectomics. Its attention can be partially attributed to its computational difficulty. Although many heuristics have previously been proposed in the literature to approximately solve graph matching, very few have any theoretical support for their performance. A common technique is to relax the discrete problem to a continuous problem, therefore enabling practitioners to bring gradient-descent-type algorithms to bear. We prove that an indefinite relaxation (when solved exactly) almost always discovers the optimal permutation, while a common convex relaxation almost always fails to discover the optimal permutation. These theoretical results suggest that initializing the indefinite algorithm with the convex optimum might yield improved practical performance. Indeed, experimental results illuminate and corroborate these theoretical findings, demonstrating that excellent results are achieved in both benchmark and real data problems by amalgamating the two approaches. PMID:26656578

  11. Relaxation strategies for patients during dermatologic surgery.

    Science.gov (United States)

    Shenefelt, Philip D

    2010-07-01

    Patient stress and anxiety are common preoperatively and during dermatologic procedures and surgeries. Stress and anxiety can occasionally interfere with performance of procedures or surgery and can induce hemodynamic instability, such as elevated blood pressure or syncope, as well as producing considerable discomfort for some patients. Detection of excess stress and anxiety in patients can allow the opportunity for corrective or palliative measures. Slower breathing, biofeedback, progressive muscular relaxation, guided imagery, hypnosis, meditation and music can help calm and rebalance the patient's autonomic nervous system and immune functioning. Handheld miniaturized heart rate variability biofeedback devices are now available. The relaxation response can easily be taught. Guided imagery can be recorded or live. Live rapid induction hypnosis followed by deepening and then self-guided imagery requires no experience on the part of the patient but does require training and experience on the part of a provider. Recorded hypnosis inductions may also be used. Meditation generally requires more prior experience and training, but is useful when the patient already is skilled in it. Live, guided meditation or meditation recordings may be used. Relaxing recorded music from speakers or headphones or live performance music may also be employed to ease discomfort and improve the patient's attitude for dermatologic procedures and surgeries. PMID:20677535

  12. Cortex phellodendri Extract Relaxes Airway Smooth Muscle.

    Science.gov (United States)

    Jiang, Qiu-Ju; Chen, Weiwei; Dan, Hong; Tan, Li; Zhu, He; Yang, Guangzhong; Shen, Jinhua; Peng, Yong-Bo; Zhao, Ping; Xue, Lu; Yu, Meng-Fei; Ma, Liqun; Si, Xiao-Tang; Wang, Zhuo; Dai, Jiapei; Qin, Gangjian; Zou, Chunbin; Liu, Qing-Hua

    2016-01-01

    Cortex phellodendri is used to reduce fever and remove dampness and toxin. Berberine is an active ingredient of C. phellodendri. Berberine from Argemone ochroleuca can relax airway smooth muscle (ASM); however, whether the nonberberine component of C. phellodendri has similar relaxant action was unclear. An n-butyl alcohol extract of C. phellodendri (NBAECP, nonberberine component) was prepared, which completely inhibits high K(+)- and acetylcholine- (ACH-) induced precontraction of airway smooth muscle in tracheal rings and lung slices from control and asthmatic mice, respectively. The contraction induced by high K(+) was also blocked by nifedipine, a selective blocker of L-type Ca(2+) channels. The ACH-induced contraction was partially inhibited by nifedipine and pyrazole 3, an inhibitor of TRPC3 and STIM/Orai channels. Taken together, our data demonstrate that NBAECP can relax ASM by inhibiting L-type Ca(2+) channels and TRPC3 and/or STIM/Orai channels, suggesting that NBAECP could be developed to a new drug for relieving bronchospasm. PMID:27239213

  13. Cortex phellodendri Extract Relaxes Airway Smooth Muscle

    Directory of Open Access Journals (Sweden)

    Qiu-Ju Jiang

    2016-01-01

    Full Text Available Cortex phellodendri is used to reduce fever and remove dampness and toxin. Berberine is an active ingredient of C. phellodendri. Berberine from Argemone ochroleuca can relax airway smooth muscle (ASM; however, whether the nonberberine component of C. phellodendri has similar relaxant action was unclear. An n-butyl alcohol extract of C. phellodendri (NBAECP, nonberberine component was prepared, which completely inhibits high K+- and acetylcholine- (ACH- induced precontraction of airway smooth muscle in tracheal rings and lung slices from control and asthmatic mice, respectively. The contraction induced by high K+ was also blocked by nifedipine, a selective blocker of L-type Ca2+ channels. The ACH-induced contraction was partially inhibited by nifedipine and pyrazole 3, an inhibitor of TRPC3 and STIM/Orai channels. Taken together, our data demonstrate that NBAECP can relax ASM by inhibiting L-type Ca2+ channels and TRPC3 and/or STIM/Orai channels, suggesting that NBAECP could be developed to a new drug for relieving bronchospasm.

  14. Graph Matching: Relax at Your Own Risk.

    Science.gov (United States)

    Lyzinski, Vince; Fishkind, Donniell E; Fiori, Marcelo; Vogelstein, Joshua T; Priebe, Carey E; Sapiro, Guillermo

    2016-01-01

    Graph matching-aligning a pair of graphs to minimize their edge disagreements-has received wide-spread attention from both theoretical and applied communities over the past several decades, including combinatorics, computer vision, and connectomics. Its attention can be partially attributed to its computational difficulty. Although many heuristics have previously been proposed in the literature to approximately solve graph matching, very few have any theoretical support for their performance. A common technique is to relax the discrete problem to a continuous problem, therefore enabling practitioners to bring gradient-descent-type algorithms to bear. We prove that an indefinite relaxation (when solved exactly) almost always discovers the optimal permutation, while a common convex relaxation almost always fails to discover the optimal permutation. These theoretical results suggest that initializing the indefinite algorithm with the convex optimum might yield improved practical performance. Indeed, experimental results illuminate and corroborate these theoretical findings, demonstrating that excellent results are achieved in both benchmark and real data problems by amalgamating the two approaches.

  15. Relaxation strategies for patients during dermatologic surgery.

    Science.gov (United States)

    Shenefelt, Philip D

    2010-07-01

    Patient stress and anxiety are common preoperatively and during dermatologic procedures and surgeries. Stress and anxiety can occasionally interfere with performance of procedures or surgery and can induce hemodynamic instability, such as elevated blood pressure or syncope, as well as producing considerable discomfort for some patients. Detection of excess stress and anxiety in patients can allow the opportunity for corrective or palliative measures. Slower breathing, biofeedback, progressive muscular relaxation, guided imagery, hypnosis, meditation and music can help calm and rebalance the patient's autonomic nervous system and immune functioning. Handheld miniaturized heart rate variability biofeedback devices are now available. The relaxation response can easily be taught. Guided imagery can be recorded or live. Live rapid induction hypnosis followed by deepening and then self-guided imagery requires no experience on the part of the patient but does require training and experience on the part of a provider. Recorded hypnosis inductions may also be used. Meditation generally requires more prior experience and training, but is useful when the patient already is skilled in it. Live, guided meditation or meditation recordings may be used. Relaxing recorded music from speakers or headphones or live performance music may also be employed to ease discomfort and improve the patient's attitude for dermatologic procedures and surgeries.

  16. OCT-based approach to local relaxations discrimination from translational relaxation motions

    Science.gov (United States)

    Matveev, Lev A.; Matveyev, Alexandr L.; Gubarkova, Ekaterina V.; Gelikonov, Grigory V.; Sirotkina, Marina A.; Kiseleva, Elena B.; Gelikonov, Valentin M.; Gladkova, Natalia D.; Vitkin, Alex; Zaitsev, Vladimir Y.

    2016-04-01

    Multimodal optical coherence tomography (OCT) is an emerging tool for tissue state characterization. Optical coherence elastography (OCE) is an approach to mapping mechanical properties of tissue based on OCT. One of challenging problems in OCE is elimination of the influence of residual local tissue relaxation that complicates obtaining information on elastic properties of the tissue. Alternatively, parameters of local relaxation itself can be used as an additional informative characteristic for distinguishing the tissue in normal and pathological states over the OCT image area. Here we briefly present an OCT-based approach to evaluation of local relaxation processes in the tissue bulk after sudden unloading of its initial pre-compression. For extracting the local relaxation rate we evaluate temporal dependence of local strains that are mapped using our recently developed hybrid phase resolved/displacement-tracking (HPRDT) approach. This approach allows one to subtract the contribution of global displacements of scatterers in OCT scans and separate the temporal evolution of local strains. Using a sample excised from of a coronary arteria, we demonstrate that the observed relaxation of local strains can be reasonably fitted by an exponential law, which opens the possibility to characterize the tissue by a single relaxation time. The estimated local relaxation times are assumed to be related to local biologically-relevant processes inside the tissue, such as diffusion, leaking/draining of the fluids, local folding/unfolding of the fibers, etc. In general, studies of evolution of such features can provide new metrics for biologically-relevant changes in tissue, e.g., in the problems of treatment monitoring.

  17. Augmented mixed models for clustered proportion data.

    Science.gov (United States)

    Bandyopadhyay, Dipankar; Galvis, Diana M; Lachos, Victor H

    2014-12-01

    Often in biomedical research, we deal with continuous (clustered) proportion responses ranging between zero and one quantifying the disease status of the cluster units. Interestingly, the study population might also consist of relatively disease-free as well as highly diseased subjects, contributing to proportion values in the interval [0, 1]. Regression on a variety of parametric densities with support lying in (0, 1), such as beta regression, can assess important covariate effects. However, they are deemed inappropriate due to the presence of zeros and/or ones. To evade this, we introduce a class of general proportion density, and further augment the probabilities of zero and one to this general proportion density, controlling for the clustering. Our approach is Bayesian and presents a computationally convenient framework amenable to available freeware. Bayesian case-deletion influence diagnostics based on q-divergence measures are automatic from the Markov chain Monte Carlo output. The methodology is illustrated using both simulation studies and application to a real dataset from a clinical periodontology study.

  18. Opportunistic tangible user interfaces for augmented reality.

    Science.gov (United States)

    Henderson, Steven; Feiner, Steven

    2010-01-01

    Opportunistic Controls are a class of user interaction techniques that we have developed for augmented reality (AR) applications to support gesturing on, and receiving feedback from, otherwise unused affordances already present in the domain environment. By leveraging characteristics of these affordances to provide passive haptics that ease gesture input, Opportunistic Controls simplify gesture recognition, and provide tangible feedback to the user. In this approach, 3D widgets are tightly coupled with affordances to provide visual feedback and hints about the functionality of the control. For example, a set of buttons can be mapped to existing tactile features on domain objects. We describe examples of Opportunistic Controls that we have designed and implemented using optical marker tracking, combined with appearance-based gesture recognition. We present the results of two user studies. In the first, participants performed a simulated maintenance inspection of an aircraft engine using a set of virtual buttons implemented both as Opportunistic Controls and using simpler passive haptics. Opportunistic Controls allowed participants to complete their tasks significantly faster and were preferred over the baseline technique. In the second, participants proposed and demonstrated user interfaces incorporating Opportunistic Controls for two domains, allowing us to gain additional insights into how user interfaces featuring Opportunistic Controls might be designed. PMID:19910657

  19. Diffuser augmented wind turbine analysis code

    Science.gov (United States)

    Carroll, Jonathan

    Wind Energy is becoming a significant source of energy throughout the world. This ever increasing field will potentially reach the limit of availability and practicality with the wind farm sites and size of the turbine itself. Therefore, it is necessary to develop innovative wind capturing devices that can produce energy in the locations where large conventional horizontal axis wind turbines (HAWTs) are too impractical to install and operate. A diffuser augmented wind turbine (DAWT) is one such innovation. DAWTs increase the power output of the rotor by increasing the wind speed into the rotor using a duct. Currently, developing these turbines is an involved process using time consuming Computational Fluid Dynamics codes. A simple and quick design tool is necessary for designers to develop efficient energy capturing devices. This work lays out the theory for a quick analysis tool for DAWTs using an axisymmetric surface vorticity method. This method allows for quick analysis of duct, hubs and rotors giving designers a general idea of the power output of the proposed hub, blade and duct geometry. The method would be similar to the way blade element momentum theory is used to design conventional HAWTs. It is determined that the presented method is viable for preliminary design of DAWTs.

  20. Spacecraft 3D Augmented Reality Mobile App

    Science.gov (United States)

    Hussey, Kevin J.; Doronila, Paul R.; Kumanchik, Brian E.; Chan, Evan G.; Ellison, Douglas J.; Boeck, Andrea; Moore, Justin M.

    2013-01-01

    The Spacecraft 3D application allows users to learn about and interact with iconic NASA missions in a new and immersive way using common mobile devices. Using Augmented Reality (AR) techniques to project 3D renditions of the mission spacecraft into real-world surroundings, users can interact with and learn about Curiosity, GRAIL, Cassini, and Voyager. Additional updates on future missions, animations, and information will be ongoing. Using a printed AR Target and camera on a mobile device, users can get up close with these robotic explorers, see how some move, and learn about these engineering feats, which are used to expand knowledge and understanding about space. The software receives input from the mobile device's camera to recognize the presence of an AR marker in the camera's field of view. It then displays a 3D rendition of the selected spacecraft in the user's physical surroundings, on the mobile device's screen, while it tracks the device's movement in relation to the physical position of the spacecraft's 3D image on the AR marker.

  1. HUNT: Scavenger Hunt with Augmented Reality

    Directory of Open Access Journals (Sweden)

    Yan Lu

    2015-04-01

    Full Text Available This project shows a creative approach to the familiar scavenger hunt game. It involved the implementation of an iPhone application, HUNT, with Augmented Reality (AR capability for the users to play the game as well as an administrative website that game organizers can use to create and make available games for users to play. Using the HUNT mobile app, users will first make a selection from a list of games, and they will then be shown a list of objects that they must seek. Once the user finds a correct object and scans it with the built-in camera on the smartphone, the application will attempt to verify if it is the correct object and then display associated multi-media AR content that may include images and videos overlaid on top of real world views. HUNT not only provides entertaining activities within an environment that players can explore, but the AR contents can serve as an educational tool. The project is designed to increase user involvement by using a familiar and enjoyable game as a basis and adding an educational dimension by incorporating AR technology and engaging and interactive multimedia to provide users with facts about the objects that they have located

  2. RAID: a relation-augmented image descriptor

    KAUST Repository

    Guerrero, Paul

    2016-07-11

    As humans, we regularly interpret scenes based on how objects are related, rather than based on the objects themselves. For example, we see a person riding an object X or a plank bridging two objects. Current methods provide limited support to search for content based on such relations. We present RAID, a relation-augmented image descriptor that supports queries based on inter-region relations. The key idea of our descriptor is to encode region-to-region relations as the spatial distribution of point-to-region relationships between two image regions. RAID allows sketch-based retrieval and requires minimal training data, thus making it suited even for querying uncommon relations. We evaluate the proposed descriptor by querying into large image databases and successfully extract nontrivial images demonstrating complex inter-region relations, which are easily missed or erroneously classified by existing methods. We assess the robustness of RAID on multiple datasets even when the region segmentation is computed automatically or very noisy.

  3. Augmenting Transition Probabilities for Neutral Atomic Nitrogen

    Science.gov (United States)

    Terrazas-Salines, Imelda; Park, Chul; Strawa, Anthony W.; Hartman, G. Joseph (Technical Monitor)

    1996-01-01

    The transition probability values for a number of neutral atomic nitrogen (NI) lines in the visible wavelength range are determined in order to augment those given in the National Bureau of Standards Tables. These values are determined from experimentation as well as by using the published results of other investigators. The experimental determination of the lines in the 410 to 430 nm range was made from the observation of the emission from the arc column of an arc-heated wind tunnel. The transition probability values of these NI lines are determined to an accuracy of +/- 30% by comparison of their measured intensities with those of the atomic oxygen (OI) multiplet at around 615 nm. The temperature of the emitting medium is determined both using a multiple-layer model, based on a theoretical model of the flow in the arc column, and an empirical single-layer model. The results show that the two models lead to the same values of transition probabilities for the NI lines.

  4. Augmented Fish Monitoring, 1988 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Michak, Patty

    1989-05-01

    Since 1986 Washington department of Fisheries (WDF) has participated in the Columbia Basin Augmented Fish Health Monitoring Project. This project provides a standardized level of fish health information from all Agencies rearing fish in the Columbia Basin. WDF has actively participated in this project, and completed its second year of fish health monitoring, data collection and pathogen inspection during 1988. This report will present data collected from January 1, 1988 to December 31, 1988 and will compare sampling results from 1987 and 1988. The analysis will be divided in two sections: adult analysis and juvenile analysis. The adult analysis will include results from screening at spawning for viral pathogens and bacterial kidney disease (BKD), and evaluation of causes of pre-spawning loss. The juvenile analysis will include pre-release examination results, mid-term rearing exam results and evaluation of the Organosomatic Analysis completed on index stocks. Additionally, highlights from monthly monitoring exams will identify any significant and unusual findings from the routine exams completed in 1988. 6 refs., 8 figs., 14 tabs.

  5. Augmented Fish Health Monitoring, 1988 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, James W.

    1989-08-15

    Augmented Fish Health Monitoring Contract AI79-87BP35585 was implemented on July 20, 1987. Second year activities focused on full implementation of disease surveillance activities and histopathological support services to participating state agencies. Persistent and sometimes severe disease losses were caused by infectious hematopoietic necrosis (IHN) in summer steelhead trout in Idaho and in spring chinook salmon at hatcheries on the lower Columbia River. Diagnostic capability was enhanced by the installation, for field use, of enzyme-linked immunosorbent assay (ELISA) technology at the Dworshak Fish Health Center for the detection and assay of bacterial kidney disease and by a dot-blot'' training session for virus identification at the Lower Columbia Fish Health Center. Complete diagnostic and inspection services were provided to 13 Columbia River basin National Fish hatcheries. Case history data was fully documented in a computerized data base for storage and analysis. This report briefly describes work being done to meet contract requirements for fish disease surveillance at Service facilities in the Columbia River basin. It also summarizes the health status of fish reared at those hatcheries and provides a summary of case history data for calendar year 1988. 2 refs., 4 tabs.

  6. Augmented Fish Health Monitoring, 1990 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, James W.

    1990-08-15

    Augmented Fish Health Monitoring Contract AI79-87BP35585 was implemented on July 20, 1987. This report briefly describes third-year work being done to meet contract requirements for fish disease surveillance at Service facilities in the Columbia River basin and for histopathological support services provided to participating state agencies. It also summarizes the health status of fish reared at participating Service hatcheries and provides a summary of case history data for calendar year 1989. Items of note included severe disease losses to infectious hematopoietic necrosis (IHN) in summer steelhead trout in Idaho, the detection of IHN virus in juvenile spring chinook salmon at hatcheries on the lower Columbia River, and improved bacterial kidney disease (BKD) detection and adult assay by enzyme-linked immunosorbent assay (ELISA) technology at the Dworshak Fish Health Center. Complete diagnostic and inspection services were provided to 13 Columbia River Basin National Fish Hatcheries. Case history data was fully documented in a computerized data base for storage and analysis and is summarized herein. 2 refs., 1 fig., 4 tabs.

  7. Augmenting painted architectures for communicating cultural heritage

    Directory of Open Access Journals (Sweden)

    Alberto Sdegno

    2015-07-01

    Full Text Available The paper presents a research under development at the University of Trieste to analyze a painted architecture by Paolo Veronese and to present the results using AR systems (Augmented Reality Systems. The canvas was painted in 1573 and it is now at the Gallerie dell’Accademia Museum in Venice. The aim of the research was to transform a two-dimensional work of art in a three dimensional one, allowing all the visitors of a museum to enter the space of the representation and perceive it in a more direct way. After the geometrical analysis of the picture, we started the digital restitution of the perspective references and proceed to model the virtual scene using Boolean primitives and applying all the textures to render the scene in a very realistic way. The further step was to convert the model into a dynamic form with AR algorithms and associate it with spatial references to allow users to do a virtual experience of it.

  8. Augmentation of tendon-to-bone healing.

    Science.gov (United States)

    Atesok, Kivanc; Fu, Freddie H; Wolf, Megan R; Ochi, Mitsuo; Jazrawi, Laith M; Doral, M Nedim; Lubowitz, James H; Rodeo, Scott A

    2014-03-19

    Tendon-to-bone healing is vital to the ultimate success of the various surgical procedures performed to repair injured tendons. Achieving tendon-to-bone healing that is functionally and biologically similar to native anatomy can be challenging because of the limited regeneration capacity of the tendon-bone interface. Orthopaedic basic-science research strategies aiming to augment tendon-to-bone healing include the use of osteoinductive growth factors, platelet-rich plasma, gene therapy, enveloping the grafts with periosteum, osteoconductive materials, cell-based therapies, biodegradable scaffolds, and biomimetic patches. Low-intensity pulsed ultrasound and extracorporeal shockwave treatment may affect tendon-to-bone healing by means of mechanical forces that stimulate biological cascades at the insertion site. Application of various loading methods and immobilization times influence the stress forces acting on the recently repaired tendon-to-bone attachment, which eventually may change the biological dynamics of the interface. Other approaches, such as the use of coated sutures and interference screws, aim to deliver biological factors while achieving mechanical stability by means of various fixators. Controlled Level-I human trials are required to confirm the promising results from in vitro or animal research studies elucidating the mechanisms underlying tendon-to-bone healing and to translate these results into clinical practice. PMID:24647509

  9. Rotor Design for Diffuser Augmented Wind Turbines

    Directory of Open Access Journals (Sweden)

    Søren Hjort

    2015-09-01

    Full Text Available Diffuser augmented wind turbines (DAWTs can increase mass flow through the rotor substantially, but have often failed to fulfill expectations. We address high-performance diffusers, and investigate the design requirements for a DAWT rotor to efficiently convert the available energy to shaft energy. Several factors can induce wake stall scenarios causing significant energy loss. The causality between these stall mechanisms and earlier DAWT failures is discussed. First, a swirled actuator disk CFD code is validated through comparison with results from a far wake swirl corrected blade-element momentum (BEM model, and horizontal-axis wind turbine (HAWT reference results. Then, power efficiency versus thrust is computed with the swirled actuator disk (AD code for low and high values of tip-speed ratios (TSR, for different centerbodies, and for different spanwise rotor thrust loading distributions. Three different configurations are studied: The bare propeller HAWT, the classical DAWT, and the high-performance multi-element DAWT. In total nearly 400 high-resolution AD runs are generated. These results are presented and discussed. It is concluded that dedicated DAWT rotors can successfully convert the available energy to shaft energy, provided the identified design requirements for swirl and axial loading distributions are satisfied.

  10. Evaluating User Experience of Augmented Reality Eyeglasses.

    Science.gov (United States)

    Gamberini, Luciano; Orso, Valeria; Beretta, Andrea; Jacucci, Giulio; Spagnolli, Anna; Rimondi, Romina

    2015-01-01

    Augmented reality based applications have been experimented with in various contexts. Typically, the interaction is supported by handled devices, which, in specific scenarios, may hinder the interaction and spoil the experience of use, as the user is forced to hold the device and to keep her eyes on it at all times. The recent launch on the market of light-weight, unobtrusive head-mounted displays may change this circumstance. Nevertheless, investigations are needed to understand if such head-worn devices effectively outperform handheld devices in terms of comfort and pleasant experience of use. Here we present two experiments aimed at assessing the comfort of wearing a head-worn, see-through AR viewer in both a controlled and a natural setting. Besides the comfort of wearing the device, aspects related to the user experience were also investigated in the field evaluation. Our findings suggest that the head-mounted display examined is comfortable to wear regardless of the context of use. Interestingly in the field trails, participants did not express concern for the impression they would have made on other people and the experience of use was overall pleasant. Possible issues related to visual fatigue emerged.

  11. LOW-FREQUENCY DIELECTRIC RELAXATION IN SILVER STEARATE LAYERS

    Directory of Open Access Journals (Sweden)

    Smirnov, A.P.

    2016-05-01

    Full Text Available The low-frequency dielectric relaxation process in silver stearate layers was studied. The increasing of dielectric permittivity with frequency decreasing and temperature increasing in studied sample are associated with the dipole-relaxation polarization mechanisms. The dispersion of loss factor could be connected with the contribution of relaxation mechanism and conductivity. The shape of the Cole-Cole diagram shows that silver stearate is a non-Debye dielectric material characterized by a wide distribution of relaxators, according to the Cole-Cole relaxation model.

  12. 3D augmented reality with integral imaging display

    Science.gov (United States)

    Shen, Xin; Hua, Hong; Javidi, Bahram

    2016-06-01

    In this paper, a three-dimensional (3D) integral imaging display for augmented reality is presented. By implementing the pseudoscopic-to-orthoscopic conversion method, elemental image arrays with different capturing parameters can be transferred into the identical format for 3D display. With the proposed merging algorithm, a new set of elemental images for augmented reality display is generated. The newly generated elemental images contain both the virtual objects and real world scene with desired depth information and transparency parameters. The experimental results indicate the feasibility of the proposed 3D augmented reality with integral imaging.

  13. Spatial augmented reality merging real and virtual worlds

    CERN Document Server

    Bimber, Oliver

    2005-01-01

    Like virtual reality, augmented reality is becoming an emerging platform in new application areas for museums, edutainment, home entertainment, research, industry, and the art communities using novel approaches which have taken augmented reality beyond traditional eye-worn or hand-held displays. In this book, the authors discuss spatial augmented reality approaches that exploit optical elements, video projectors, holograms, radio frequency tags, and tracking technology, as well as interactive rendering algorithms and calibration techniques in order to embed synthetic supplements into the real

  14. Intravenous alpha-1 antitrypsin augmentation therapy: systematic review

    DEFF Research Database (Denmark)

    Gøtzsche, Peter C; Johansen, Helle Krogh

    2010-01-01

    We reviewed the benefits and harms of augmentation therapy with alpha-1 antitrypsin in patients with alpha-1 antitrypsin deficiency and lung disease. We searched for randomised trials comparing augmentation therapy with placebo or no treatment in PubMed and ClinicalTrials (7 January 2010). Two...... (difference 1.14 g/l; 95% confidence interval 0.14 to 2.14; p = 0.03) over the total course of the trials. Augmentation therapy with alpha-1 antitrypsin cannot be recommended in view of the lack of evidence of clinical benefit and the cost of treatment....

  15. Augmented reality as a design tool for mobile interfaces

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Nielsen, Christina

    2000-01-01

    This paper challenges user interface paradigms for mobile devices, by using the technical classification of augmented reality interfaces as a thinking tool to develop ideas for interaction with mobile devices. The paper presents future work scenarios from a wastewater treatment plant embodying PDA...... applications derived from the classification of augmented reality interfaces. The focus on physical interaction with objects of work and with the mobile device provides us with a range of interaction styles, based on e.g. gestures and manipulation of objects. Furthermore, issues of transparency and directness...... are addressed. The future scenarios indicate that the concepts of augmented reality support solving context problems in mobile design....

  16. Prototype Application of Portable Augmented Reality Technology for Enhancement of Space and Planetary Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — For this project, several different augmentation techniques for locating ground articles from distance through an augmented live view were investigated....

  17. Accurate determination of the binding energy of the formic acid dimer: The importance of geometry relaxation

    Science.gov (United States)

    Kalescky, Robert; Kraka, Elfi; Cremer, Dieter

    2014-02-01

    The formic acid dimer in its C2h-symmetrical cyclic form is stabilized by two equivalent H-bonds. The currently accepted interaction energy is 18.75 kcal/mol whereas the experimental binding energy D0 value is only 14.22 ±0.12 kcal/mol [F. Kollipost, R. W. Larsen, A. V. Domanskaya, M. Nörenberg, and M. A. Suhm, J. Chem. Phys. 136, 151101 (2012)]. Calculation of the binding energies De and D0 at the CCSD(T) (Coupled Cluster with Single and Double excitations and perturbative Triple excitations)/CBS (Complete Basis Set) level of theory, utilizing CCSD(T)/CBS geometries and the frequencies of the dimer and monomer, reveals that there is a 3.2 kcal/mol difference between interaction energy and binding energy De, which results from (i) not relaxing the geometry of the monomers upon dissociation of the dimer and (ii) approximating CCSD(T) correlation effects with MP2. The most accurate CCSD(T)/CBS values obtained in this work are De = 15.55 and D0 = 14.32 kcal/mol where the latter binding energy differs from the experimental value by 0.1 kcal/mol. The necessity of employing augmented VQZ and VPZ calculations and relaxing monomer geometries of H-bonded complexes upon dissociation to obtain reliable binding energies is emphasized.

  18. Lift Augmentation for Vertical Axis Wind Turbines

    Directory of Open Access Journals (Sweden)

    Gerald M Angle II

    2010-12-01

    Full Text Available The concept of harnessing wind power has been around for centuries, and is first recorded by the Persians in 900 AD. These early uses of wind power were for the processing of food, particularly grinding grains, and consisted of stationary blades around a horizontal axis, the precursor to today’s horizontal axis wind turbines (HAWT. Technology for these wind mills was essentially the same until the 1930’s when advances in aircraft propeller theories were applied to the blades of the turbine. During this development period, which has since remained basically unchanged, the design push was for increasingly larger propellers requiring heavy and costly transmissions, generators, and support towers to be installed. An alternative concept to the HAWT was developed by Georges Darrieus [5], which utilized a vertical shaft and is known as a vertical axis wind turbine (VAWT. The scientific development of the concept did not gain strong attention until the 1970’s due to the perceived low efficiency of this style. This perception was due in part to the portion of the blade’s rotary path that is adverse to the generation of power. This efficiency loss can be minimized by the mechanical movement of the blade, relative to the airflow during the upwind portion of the blades’ rotational path. Since, circulation control can alter the forces generated by an airfoil, it could be used to increase the efficiency of a VAWT by increasing the torque produced on the downwind portion of the path, while removing the need for a physical change in angle of attack. With the recent upturn in petroleum costs and global warming concerns, interest in renewable energy technologies have been reinvigorated, in particular the desire for advanced wind energy technologies, including the application of lift augmentation techniques. One of these techniques is to utilize circulation control to enhance the lifting capacity of the blades based on the location of the blade in the

  19. Augmenting the Deliberative Method for Ranking Risks.

    Science.gov (United States)

    Susel, Irving; Lasley, Trace; Montezemolo, Mark; Piper, Joel

    2016-01-01

    The Department of Homeland Security (DHS) characterized and prioritized the physical cross-border threats and hazards to the nation stemming from terrorism, market-driven illicit flows of people and goods (illegal immigration, narcotics, funds, counterfeits, and weaponry), and other nonmarket concerns (movement of diseases, pests, and invasive species). These threats and hazards pose a wide diversity of consequences with very different combinations of magnitudes and likelihoods, making it very challenging to prioritize them. This article presents the approach that was used at DHS to arrive at a consensus regarding the threats and hazards that stand out from the rest based on the overall risk they pose. Due to time constraints for the decision analysis, it was not feasible to apply multiattribute methodologies like multiattribute utility theory or the analytic hierarchy process. Using a holistic approach was considered, such as the deliberative method for ranking risks first published in this journal. However, an ordinal ranking alone does not indicate relative or absolute magnitude differences among the risks. Therefore, the use of the deliberative method for ranking risks is not sufficient for deciding whether there is a material difference between the top-ranked and bottom-ranked risks, let alone deciding what the stand-out risks are. To address this limitation of ordinal rankings, the deliberative method for ranking risks was augmented by adding an additional step to transform the ordinal ranking into a ratio scale ranking. This additional step enabled the selection of stand-out risks to help prioritize further analysis. PMID:26224206

  20. Transparent 3D display for augmented reality

    Science.gov (United States)

    Lee, Byoungho; Hong, Jisoo

    2012-11-01

    Two types of transparent three-dimensional display systems applicable for the augmented reality are demonstrated. One of them is a head-mounted-display-type implementation which utilizes the principle of the system adopting the concave floating lens to the virtual mode integral imaging. Such configuration has an advantage in that the threedimensional image can be displayed at sufficiently far distance resolving the accommodation conflict with the real world scene. Incorporating the convex half mirror, which shows a partial transparency, instead of the concave floating lens, makes it possible to implement the transparent three-dimensional display system. The other type is the projection-type implementation, which is more appropriate for the general use than the head-mounted-display-type implementation. Its imaging principle is based on the well-known reflection-type integral imaging. We realize the feature of transparent display by imposing the partial transparency to the array of concave mirror which is used for the screen of reflection-type integral imaging. Two types of configurations, relying on incoherent and coherent light sources, are both possible. For the incoherent configuration, we introduce the concave half mirror array, whereas the coherent one adopts the holographic optical element which replicates the functionality of the lenslet array. Though the projection-type implementation is beneficial than the head-mounted-display in principle, the present status of the technical advance of the spatial light modulator still does not provide the satisfactory visual quality of the displayed three-dimensional image. Hence we expect that the head-mounted-display-type and projection-type implementations will come up in the market in sequence.

  1. Improving Robotic Operator Performance Using Augmented Reality

    Science.gov (United States)

    Maida, James C.; Bowen, Charles K.; Pace, John W.

    2007-01-01

    The Special Purpose Dexterous Manipulator (SPDM) is a two-armed robot that functions as an extension to the end effector of the Space Station Robotics Manipulator System (SSRMS), currently in use on the International Space Station (ISS). Crew training for the SPDM is accomplished using a robotic hardware simulator, which performs most of SPDM functions under normal static Earth gravitational forces. Both the simulator and SPDM are controlled from a standard robotic workstation using a laptop for the user interface and three monitors for camera views. Most operations anticipated for the SPDM involve the manipulation, insertion, and removal of any of several types of Orbital Replaceable Unit (ORU), modules which control various ISS functions. Alignment tolerances for insertion of the ORU into its receptacle are 0.25 inch and 0.5 degree from nominal values. The pre-insertion alignment task must be performed within these tolerances by using available video camera views of the intrinsic features of the ORU and receptacle, without special registration markings. Since optimum camera views may not be available, and dynamic orbital lighting conditions may limit periods of viewing, a successful ORU insertion operation may require an extended period of time. This study explored the feasibility of using augmented reality (AR) to assist SPDM operations. Geometric graphical symbols were overlaid on one of the workstation monitors to afford cues to assist the operator in attaining adequate pre-insertion ORU alignment. Twelve skilled subjects performed eight ORU insertion tasks using the simulator with and without the AR symbols in a repeated measures experimental design. Results indicated that using the AR symbols reduced pre-insertion alignment error for all subjects and reduced the time to complete pre-insertion alignment for most subjects.

  2. Dry cooling tower with water augmentation

    Energy Technology Data Exchange (ETDEWEB)

    Ireland, R.G.; Tramontini, V.N.

    1981-06-23

    An air cooling tower system is disclosed for condensing exhaust steam in power plants, that has water cooling augmentation to maintain the plant cooling capacity during high atmospheric temperature periods. The cooling tower includes a plurality of banks of brazed aluminum plate and fin type heat exchangers arranged in inverted ''v'' shaped sets. These heat exchangers cool ammonia used as the cooling fluid in the primary condenser for the power plant turbine exhaust steam. Each of these heat exchangers has a core consisting of a plurality of parallel aluminum plates spaced apart by fin assemblies that define a plurality of fluid passes. Approximately every other one of these passes has closed sides that open at the ends of the core to headers and define ammonia passes. The passes adjacent the ammonia passes are open at the sides and define air passes that permit the free flow of air transversely through the heat exchanger cores. An additional pass is provided adjacent every fourth one of the ammonia passes and these have closed sides and ends and define the passes for the cooling water. The water passes communicate at the bottom of the core with a water inlet manifold and at the top of the core with a water outlet manifold. The cooling tower system is designed so that at 55 degrees fahrenheit air temperatures or below, the cooling air alone will provide the necessary cooling for the ammonia to satisfy plant requirements. Above 55 degrees fahrenheit air temperature, cooling water from a separate water tank is pumped through the water passes to provide an additional cooling effect to maintain the design cooling capacity.

  3. Third-generation percutaneous vertebral augmentation systems

    Science.gov (United States)

    Galzio, Renato; Kazakova, Anna; Pantalone, Andrea; Grillea, Giovanni; Bartolo, Marcello; Salini, Vincenzo; Magliani, Vincenzo

    2016-01-01

    Currently, there is no general consensus about the management of osteoporotic vertebral fractures (OVF). In the past, conservative treatment for at least one month was deemed appropriate for the majority of vertebral fractures. When pain persisted after conservative treatment, it was necessary to consider surgical interventions including: vertebroplasty for vertebral fractures with less than 30% loss of height of the affected vertebral body and kyphoplasty for vertebral fractures with greater than 30% loss of height. Currently, this type of treatment is not feasible. Herein we review the characteristics and methods of operation of three of the most common percutaneous vertebral augmentation systems (PVAS) for the treatment of OVF: Vertebral Body Stenting® (VBS), OsseoFix® and Spine Jack®. VBS is a titanium device accompanied by a hydraulic (as opposed to mechanical) working system which allows a partial and not immediate possibility to control the opening of the device. On the other hand, OsseoFix® and Spine Jack® are accompanied by a mechanical working system which allows a progressive and controlled reduction of the vertebral fracture. Another important aspect to consider is the vertebral body height recovery. OsseoFix® has an indirect mechanism of action: the compaction of the trabecular bone causes an increase in the vertebral body height. Unlike the Vertebral Body Stenting® and Spine Jack®, the OsseoFix® has no direct lift mechanism. Therefore, for these characteristics and for the force that this device is able to provide. In our opinion, Spine Jack® is the only device also suitable for the treatment OVF, traumatic fracture (recent, old or inveterate) and primary or secondary bone tumors. PMID:27683690

  4. Telescopic multi-resolution augmented reality

    Science.gov (United States)

    Jenkins, Jeffrey; Frenchi, Christopher; Szu, Harold

    2014-05-01

    To ensure a self-consistent scaling approximation, the underlying microscopic fluctuation components can naturally influence macroscopic means, which may give rise to emergent observable phenomena. In this paper, we describe a consistent macroscopic (cm-scale), mesoscopic (micron-scale), and microscopic (nano-scale) approach to introduce Telescopic Multi-Resolution (TMR) into current Augmented Reality (AR) visualization technology. We propose to couple TMR-AR by introducing an energy-matter interaction engine framework that is based on known Physics, Biology, Chemistry principles. An immediate payoff of TMR-AR is a self-consistent approximation of the interaction between microscopic observables and their direct effect on the macroscopic system that is driven by real-world measurements. Such an interdisciplinary approach enables us to achieve more than multiple scale, telescopic visualization of real and virtual information but also conducting thought experiments through AR. As a result of the consistency, this framework allows us to explore a large dimensionality parameter space of measured and unmeasured regions. Towards this direction, we explore how to build learnable libraries of biological, physical, and chemical mechanisms. Fusing analytical sensors with TMR-AR libraries provides a robust framework to optimize testing and evaluation through data-driven or virtual synthetic simulations. Visualizing mechanisms of interactions requires identification of observable image features that can indicate the presence of information in multiple spatial and temporal scales of analog data. The AR methodology was originally developed to enhance pilot-training as well as `make believe' entertainment industries in a user-friendly digital environment We believe TMR-AR can someday help us conduct thought experiments scientifically, to be pedagogically visualized in a zoom-in-and-out, consistent, multi-scale approximations.

  5. Context-Augmented Robotic Interaction Layer (CARIL) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Today, as humans reach beyond the earth to near and deep space, there is obvious and urgent need to augment the capabilities of human astronauts and (ground-)...

  6. Virtual, augmented reality and serious games for healthcare

    CERN Document Server

    Jain, Lakhmi; Anderson, Paul

    2014-01-01

    There is a tremendous interest among researchers for the development of virtual, augmented reality and games technologies due to their widespread applications in medicine and healthcare. To date the major applications of these technologies include medical simulation, telemedicine, medical and healthcare training, pain control, visualisation aid for surgery, rehabilitation in cases such as stroke, phobia, and trauma therapies. Many recent studies have identified the benefits of using Virtual Reality, Augmented Reality, or serious games in a variety of medical applications.   This research volume on Virtual, Augmented Reality and Serious Games for Healthcare 1 offers an insightful introduction to the theories, development and applications of virtual, augmented reality and digital games technologies in medical and clinical settings and healthcare in general. It is divided into six sections: section one presents a selection of applications in medical education and healthcare management; Section two relates to th...

  7. Mobile Cloud Computing: A Review on Smartphone Augmentation Approaches

    CERN Document Server

    Abolfazli, Saeid; Gani, Abdullah

    2012-01-01

    Smartphones have recently gained significant popularity in heavy mobile processing while users are increasing their expectations toward rich computing experience. However, resource limitations and current mobile computing advancements hinder this vision. Therefore, resource-intensive application execution remains a challenging task in mobile computing that necessitates device augmentation. In this article, smartphone augmentation approaches are reviewed and classified in two main groups, namely hardware and software. Generating high-end hardware is a subset of hardware augmentation approaches, whereas conserving local resource and reducing resource requirements approaches are grouped under software augmentation methods. Our study advocates that consreving smartphones' native resources, which is mainly done via task offloading, is more appropriate for already-developed applications than new ones, due to costly re-development process. Cloud computing has recently obtained momentous ground as one of the major co...

  8. Virtual and augmented reality for training on maintenance

    International Nuclear Information System (INIS)

    This paper presents two projects focused to support training on maintenance using new technologies. Both projects aims at specifying. designing, developing, and demonstrating prototypes allowing computer guided maintenance of complex mechanical elements using Virtual Reality (VIRMAN) and Augmented Reality (STARMATE) techniques. VIRMAN project is dedicated to training course development on maintenance using Virtual Reality. It based in the animation of three dimension images for component assembly/de-assembly or equipment movements. STARMATE will rely on Augmented Reality techniques which is a growing area in virtual Reality research. The idea of Augmented Reality is to combine a real scene, viewed by the user, with a virtual scene generated by a computer augmenting the reality with additional information. (Author)

  9. Aircraft Control Augmentation and Health Monitoring Using FADS Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I research proposal is aimed at demonstrating the feasibility of an innovative architecture comprising control augmentation and on-line health monitoring...

  10. Exploring Urban Environments Using Virtual and Augmented Reality

    Directory of Open Access Journals (Sweden)

    Stelios Papakonstantinou

    2007-02-01

    Full Text Available In this paper, we propose the use of specific system architecture, based on mobile device, for navigation in urban environments. The aim of this work is to assess how virtual and augmented reality interface paradigms can provide enhanced location based services using real-time techniques in the context of these two different technologies. The virtual reality interface is based on faithful graphical representation of the localities of interest, coupled with sensory information on the location and orientation of the user, while the augmented reality interface uses computer vision techniques to capture patterns from the real environment and overlay additional way-finding information, aligned with real imagery, in real-time. The knowledge obtained from the evaluation of the virtual reality navigational experience has been used to inform the design of the augmented reality interface. Initial results of the user testing of the experimental augmented reality system for navigation are presented.

  11. Augmented reality aiding collimator exchange at the LHC

    International Nuclear Information System (INIS)

    Novel Augmented Reality techniques have the potential to have a large positive impact on the way remote maintenance operations are carried out in hazardous areas, e.g. areas where radiation doses that imply careful planning and optimization of maintenance operations are present. This paper describes an Augmented Reality strategy, system and implementation for aiding the remote collimator exchange in the LHC, currently the world's largest and highest-energy particle accelerator. The proposed system relies on marker detection and multi-modal augmentation in real-time. A database system has been used to ensure flexibility. The system has been tested in a mock-up facility, showing real time performance and great potential for future use in the LHC. The technical-scientific difficulties identified during the development of the system and the proposed solutions described in this paper may help the development of future Augmented Reality systems for remote handling in scientific facilities

  12. [Cement augmentation of pedicle screws : Pros and cons].

    Science.gov (United States)

    Schnake, K J; Blattert, T R; Liljenqvist, U

    2016-09-01

    Cement augmentation of pedicle screws biomechanically increases screw purchase in the bone. However, clinical complications may occur. The pros and cons of the technique are discussed from different clinical perspectives. PMID:27514827

  13. Augmented Reality a Review on Technology and Applications

    Science.gov (United States)

    Petruse, Radu Emanuil; Bondrea, Ioan

    2014-11-01

    We present in this paper an overview of the concepts and potential industrial Augmented Reality applications that can be very efficient. We also present the basic technological requirements for an AR system

  14. Dimensions of Mobile Augmented Reality for Learning: A First Inventory

    NARCIS (Netherlands)

    Specht, Marcus; Ternier, Stefaan; Greller, Wolfgang

    2011-01-01

    Specht, M., Ternier, S., & Greller, W. (2011). Dimensions of Mobile Augmented Reality for Learning: A First Inventory. Journal of the Research for Educational Technology (RCET), 7(1), 117-127. Spring 2011.

  15. Die Welt als Spielfeld: Mobile Serious Games mit Augmented Reality

    NARCIS (Netherlands)

    Klemke, Roland; Schneider, Jan; Happe, Sven; Bockelmann, Timo; Börner, Dirk; Specht, Marcus

    2014-01-01

    Technological innovations enable us to connect computer games with the environment they are played in: augmented reality games take the world as their playground. In this talk, the use of such technologies for mobile serious games is explored.

  16. Augmented Reality System for E-maintenance Application

    Science.gov (United States)

    Benbelkacem, S.; Zenati-Henda, N.; Belhocine, M.; Malek, S.

    2009-03-01

    We present in this paper an Augmented Reality platform for e-maintenance application. In our case, the aim is not to develop a vision system based on augmented reality concept, but to show the relationship between the different actors in the proposed architecture and to facilitate maintenance of the machine. With this platform we identify all possible scenarios which allow the technician to intervene on a machine breakdown using distant expert if necessary. Each scenario depends on the machine parameters and the technician competences. To implement a configuration of Augmented Reality system, we chose a case study of maintenance scenario for machine breakdown. Then we represent this scenario by an interaction model which allows establishing Augmented Reality configuration.

  17. Structural relaxation monitored by instantaneous shear modulus

    DEFF Research Database (Denmark)

    Olsen, Niels Boye; Dyre, Jeppe; Christensen, Tage Emil

    1998-01-01

    time definition based on a recently proposed expression for the relaxation time, where G [infinity] reflects the fictive temperature. All parameters entering the reduced time were determined from independent measurements of the frequency-dependent shear modulus of the equilibrium liquid.......This paper reports on aging of the silicone oil MS704 for sudden changes of temperature from 210.5 to 209.0 K and from 207.5 to 209.0 K studied by continuously monitoring the instantaneous shear modulus G [infinity]. The results are interpreted within the Tool-Narayanaswamy formalism with a reduced...

  18. Structural relaxation in viscous metallic liquids

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, A. [National Inst. of Standards and Technology (BFRL), Gaithersburg, MD (United States)]|[Technische Univ. Muenchen, Muenchen (Germany); Wuttke, J.; Petry, W. [Technische Univ. Muenchen, Muenchen (Germany); Schober, H. [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France); Randl, O.G. [Manufacture Michelin, Clermont-Ferrand (France)

    1999-11-01

    Recently, metallic alloys have been found that exhibit extremely large viscosities in the liquid state. These liquids can be quenched into bulk metallic glasses at relatively modest cooling rates. In contrast to simple metals the structural relaxation of these systems show a two step decay in the liquid state. This behaviour has long been known for molecular or ionic glass formers in their under-cooled liquid state. Applying an analysis previously used for the glass formers (mode-coupling theory) a full quantitative description of the neutron data is obtained for these metallic liquids. (authors) 3 refs., 2 figs.

  19. Compatible Relaxation and Coarsening in Algebraic Multigrid

    Energy Technology Data Exchange (ETDEWEB)

    Brannick, J J; Falgout, R D

    2009-09-22

    We introduce a coarsening algorithm for algebraic multigrid (AMG) based on the concept of compatible relaxation (CR). The algorithm is significantly different from standard methods, most notably because it does not rely on any notion of strength of connection. We study its behavior on a number of model problems, and evaluate the performance of an AMG algorithm that incorporates the coarsening approach. Lastly, we introduce a variant of CR that provides a sharper metric of coarse-grid quality and demonstrate its potential with two simple examples.

  20. Reflexogenic relaxation gastroduodenography by the acupuncture method

    Energy Technology Data Exchange (ETDEWEB)

    Rabkin, I.Kh.; Tsibulyak, V.N.; Mnatsakyan, K.A.; Kondorskaya, I.L.; Galkina, T.V.

    The communication is based upon the results of x-ray examination of the stomach and duodenum in 63 patients with stenoses of the pyloroduodenal zone, cicatrical deformities of the duodenal bulb, bulbar ulcer, duodenal organic lesions, and functional stenosis of the loop. First a routine X-ray examination of the stomach and duodenum was performed using barium-water mixture, then followed acupuncture aimed at hypotension in the definite points of the floor of the auricle where branches of the vagus innervating the stomach and duodenum are located. As distinct from pharmacological relaxation this method produces a purpose-oriented selective effect.

  1. Thermal Stress Relaxation of Nonhomogeneous Coatings

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Nonhomogeneous coatings (NCs) are new type of engineering structures that is not yet fully understood. One important aspect in the mechanical analysis of NCs is to determine the gradient distribution that creates the maximum thermal stress relaxation. This paper employs numerical analysis using the finite element metho d and experimental analysis using moire interference to study the stress distrib ution in NCs. Attention focused on the edge effect stresses in the coating/subst rate structures and their dependence on the different gradient distributions of this new kind of composite structure.

  2. Slow relaxation in structure-forming ferrofluids.

    Science.gov (United States)

    Sreekumari, Aparna; Ilg, Patrick

    2013-10-01

    We study the behavior of colloidal magnetic fluids at low density for various dipolar interaction strengths by performing extensive Langevin dynamics simulations with model parameters that mimic cobalt-based ferrofluids used in experiments. Our study mainly focuses on the structural and dynamical properties of dipolar fluids and the influence of structural changes on their dynamics. Drastic changes from chainlike to networklike structures in the absence of an external magnetic field are observed. This crossover plays an important role in the slowing down of dynamics that is reflected in various dynamical properties including the tracer diffusion and the viscosity and also in the structural relaxation. PMID:24229180

  3. Transpedicle body augmenter for vertebral augmentation in symptomatic multiple osteoporotic compression fractures

    Directory of Open Access Journals (Sweden)

    Li Allen

    2010-01-01

    Full Text Available Background: Multiple osteoporotic vertebral compression fractures (VCFs have been treated with polymethylmethacrylate augmentation; however, there are cement complications and long-term fracture healing that are unknown. Transpedicle body augmenter (a porous titanium spacer has been reported as an internal support to reconstruct the vertebral body combining short-segment fixation in burst fracture and Kümmell′s disease with cord compression. Transpedicle body augmenter for vertebral augmentation (TpBA also has been reported successfully in treating single painful VCF and vertebral metastasis lesions including pending fractures and pathologic compression fractures. To test the hypothesis that TpBA can effectively and safely treat the symptomatic multiple VCFs, this retrospective study was done by analyzing the radiographic and clinical results. Materials and Methods: We retrospectively reviewed clinical and radiographic results of TpBA for symptomatic multiple (more than two levels VCFs in 62 patients with a total of 236 levels, i.e. 3.8 VCFs per patient. Manual reduction and TpBA via paramedian incisions with blunt dissection were done. One incision was made for two continuous levels and alternative side was selected for next incision. Mean age was 74.3 years (range, 62-87 years, and female-male ratio was 5.2:1. Anterior vertebral height and wedge angle by radiographic findings were measured at preoperative, initial follow-up and final follow-up. Clinical results were assessed by questionnaires and clinical observations. By July 2008, 58 patients returned to answer the questionnaire including quantification of pain on the visual analog scale, the response to operations (better, same, or worse after operation, returned to their pre-fracture function (yes/no and satisfaction (a scale of 0 = completely dissatisfied to 10 = completely satisfied. Results: The mean symptom duration was 7 months, and follow-up, 48 months. The average operation time

  4. Augmented communication with haptic I/O in mobile devices

    OpenAIRE

    Haverinen, Laura

    2012-01-01

    Nonverbal communication is a very important part of face to face communication. Both explicit and implicit additions to verbal communication augment the information content of communication. Before telephones did not provide any means for adding nonverbal information to the communication, but now, as the technology has advanced, it is possible to start augmenting also the communication on the phone. Adding a haptic I/O device to a regular mobile phone opens possibilities to add value to commu...

  5. Online Registration Tool and Markerless Tracking for Augmented Reality

    OpenAIRE

    Marimon, D.; Abdeljaoued, Y.; Ebrahimi, T.

    2005-01-01

    This paper presents a markerless tracking algorithm for augmented reality with no constraints in the geometry of the scene. User’s pose is estimated using natural feature point extraction and tracking, and the epipolar geometry constraint between camera views. An online registration tool is also described. With this procedure, the user determines the initial 3D pose of the virtual object that augments the scene. Validation and discussions about advantages of this algorithm along with further ...

  6. Injectable Tissue-Engineered Soft Tissue for Tissue Augmentation

    OpenAIRE

    Rhee, Sung-Mi; You, Hi-Jin; Han, Seung-Kyu

    2014-01-01

    Soft tissue augmentation is a process of implanting tissues or materials to treat wrinkles or soft tissue defects in the body. Over the years, various materials have evolved to correct soft tissue defects, including a number of tissues and polymers. Autogenous dermis, autogenous fat, autogenous dermis-fat, allogenic dermis, synthetic implants, and fillers have been widely accepted for soft tissue augmentations. Tissue engineering technology has also been introduced and opened a new venue of o...

  7. Magnetic field induced augmented thermal conduction phenomenon in magneto nanocolloids

    OpenAIRE

    Katiyar, Ajay; Dhar, Purbarun; Nandi, Tandra; Das, Sarit K

    2015-01-01

    Magnetic field induced drastically augmented thermal conductivity of magneto nanocolloids involving magnetic oxide nanoparticles, viz. Fe2O3, Fe3O4, Nickel oxide (NiO), Cobalt oxide (Co3O4), dispersed in different base fluids (heat transfer oil, kerosene, and ethylene glycol) have been reported. Experiments reveal the augmented thermal transport under the external applied magnetic field, with kerosene based MNCs showing at relatively low magnetic field intensities as compared to the heat tran...

  8. Augmented Reality user interface analysis in mobile devices

    OpenAIRE

    Guzmán Guzmán, José Daniel

    2014-01-01

    [ENGLISH] The presence of high-end phones in the telephony market, has allowed consumers to have access to the computational power of mobile smart-phone devices. Powerful processors, combined with cameras and ease of development encourage an increasing number of Augmented Reality (AR) researchers to adopt mobile smart-phones as AR platform. The same way, Augmented Reality on mobile devices has become increasingly popular for many applications, including search and location, tourism, and shopp...

  9. Augmented Reality Computer-Aided Drawing (AR-CAD)

    OpenAIRE

    ECT Team, Purdue

    2007-01-01

    While Virtual Reality (VR) replaces the entire real world with virtual images, Augmented Reality (AR) superimposes virtual images on the real world. Augmented Reality (a most useful form of Mixed Reality (MR)) is a popular concept for using computers to overlay virtual information onto a view of the real world. In 2000, Phillip Dunston then at the University of Washington in Seattle and his research team presented the initial concept of AR CAD developed for supporting design and construction....

  10. MHP Oriented Interactive Augmented Reality System for Sports Broadcasting Environments

    OpenAIRE

    Igor G. Olaizola; Martirena, Inigo Barandiaran; Kammann, Tobias D.

    2007-01-01

    Television and movie images have been altered ever since it was technically possible. Nowadays embedding advertisements, or incorporating text and graphics in TV scenes, are common practice, but they can not be considered as integrated part of the scene. The introduction of new services for interactive augmented television is discussed in this paper. We analyse the main aspects related with the whole chain of augmented reality production.Interactivity is one of the most important added values...

  11. DAARIA: Driver Assistance by Augmented Reality for Intelligent Automobile

    OpenAIRE

    George, Paul; Thouvenin, Indira; Fremont, Vincent; Cherfaoui, Véronique

    2012-01-01

    International audience Taking into account the drivers' state is a major challenge for designing new advanced driver assistance systems. In this paper we present a driver assistance system strongly coupled to the user. DAARIA 1 stands for Driver Assistance by Augmented Reality for Intelligent Automobile. It is an augmented reality interface powered by several sensors. The detection has two goals: one is the position of obstacles and the quantification of the danger represented by them. The...

  12. Thinking factory for the future: from PLM to augmented reality

    OpenAIRE

    Dhuieb, Mohamed Anis; BELKADI, Farouk; Florent LAROCHE; Bernard, Alain

    2014-01-01

    International audience Virtual engineering technologies become an emerging field in industry and research. Nowadays, industrials are using Virtual and Augmented Reality in different phases of their manufacturing process (advanced manufacturing process visualization, assembly tasks, training…). The purpose of this paper is to introduce the advantage of linking augmented reality application, to help employees on their daily tasks. This involves the connections with the existing components of...

  13. Cortical excitability changes following grasping exercise augmented with electrical stimulation

    DEFF Research Database (Denmark)

    Barsi, Gergely Istvan; Popovic, Dejan B.; Tarkka, Ina M.;

    2008-01-01

    Rehabilitation with augmented electrical stimulation can enhance functional recovery after stroke, and cortical plasticity may play a role in this process. The purpose of this study was to compare the effects of three training paradigms on cortical excitability in healthy subjects. Cortical......) functional electrical stimulation (FES) of the finger flexors and extensors, (2) voluntary movement (VOL) with sensory stimulation, and (3) therapeutic FES (TFES) where the electrical stimulation augmented voluntary activation. TFES training produced a significant increase in MEP magnitude throughout...

  14. Aerodynamic structures and processes in rotationally augmented flow fields

    DEFF Research Database (Denmark)

    Schreck, S.J.; Sørensen, Niels N.; Robinson, M.C.

    2007-01-01

    Rotational augmentation of horizontal axis wind turbine blade aerodynamics currently remains incompletely characterized and understood. To address this, the present study concurrently analysed experimental measurements and computational predictions, both of which were unique and of high quality...... to reliably identify and track pertinent features in the rotating blade boundary layer topology as they evolved in response to varying wind speed. Subsequently, boundary layer state was linked to above-surface flow field structure and used to deduce mechanisms; underlying augmented aerodynamic force...

  15. Portable augmentative and alternative communication device with pictogram recognition functionality

    OpenAIRE

    Ayyalasomayajula, Pradyumna; Grassi Pauletti, Sara; Deurin, Nicolas; Gueguen, Thierry; Vaucher, Christian; Muhlebach, Yves; Farine, Pierre-André; Guinand, Michel

    2009-01-01

    The field of electronic aid for disabled people has been growing constantly with many new innovations being added every year. The need for electronic aid in alternative and augmentative communication (ACC) is becoming increasingly important. Devices which describe extra ways of helping people who find it hard to communicate by speech or writing are being introduced into the market every year. A next generation device for alternative and augmentative communication which shall be used in rehab...

  16. The Visual Web User Interface Design in Augmented Reality Technology

    Directory of Open Access Journals (Sweden)

    Chouyin Hsu

    2013-03-01

    Full Text Available Upon the popularity of 3C devices, the visual creatures are all around us, such the online game, touch pad, video and animation. Therefore, the text-based web page will no longer satisfy users. With the popularity of webcam, digital camera, stereoscopic glasses, or head-mounted display, the user interface becomes more visual and multi-dimensional. For the consideration of 3D and visual display in the research of web user interface design, Augmented Reality technology providing the convenient tools and impressive effects becomes the hot topic. Augmented Reality effect enables users to represent parts of the digital objects on top of the physical surroundings. The easy operation with webcam greatly improving the visual representation of web pages becomes the interest of our research. Therefore, we apply Augmented Reality technology for developing a city tour web site to collect the opinions of users. Therefore, the website stickiness is an important measurement. The major tasks of the work include the exploration of Augmented Reality technology and the evaluation of the outputs of Augmented Reality. The feedback opinions of users are valuable references for improving AR application in the work. As a result, the AR increasing the visual and interactive effects of web page encourages users to stay longer and more than 80% of users are willing to return for visiting the website soon. Moreover, several valuable conclusions about Augmented Reality technology in web user interface design are also provided for further practical references.

  17. Augmented reality based real-time subcutaneous vein imaging system.

    Science.gov (United States)

    Ai, Danni; Yang, Jian; Fan, Jingfan; Zhao, Yitian; Song, Xianzheng; Shen, Jianbing; Shao, Ling; Wang, Yongtian

    2016-07-01

    A novel 3D reconstruction and fast imaging system for subcutaneous veins by augmented reality is presented. The study was performed to reduce the failure rate and time required in intravenous injection by providing augmented vein structures that back-project superimposed veins on the skin surface of the hand. Images of the subcutaneous vein are captured by two industrial cameras with extra reflective near-infrared lights. The veins are then segmented by a multiple-feature clustering method. Vein structures captured by the two cameras are matched and reconstructed based on the epipolar constraint and homographic property. The skin surface is reconstructed by active structured light with spatial encoding values and fusion displayed with the reconstructed vein. The vein and skin surface are both reconstructed in the 3D space. Results show that the structures can be precisely back-projected to the back of the hand for further augmented display and visualization. The overall system performance is evaluated in terms of vein segmentation, accuracy of vein matching, feature points distance error, duration times, accuracy of skin reconstruction, and augmented display. All experiments are validated with sets of real vein data. The imaging and augmented system produces good imaging and augmented reality results with high speed.

  18. Augmented reality based real-time subcutaneous vein imaging system.

    Science.gov (United States)

    Ai, Danni; Yang, Jian; Fan, Jingfan; Zhao, Yitian; Song, Xianzheng; Shen, Jianbing; Shao, Ling; Wang, Yongtian

    2016-07-01

    A novel 3D reconstruction and fast imaging system for subcutaneous veins by augmented reality is presented. The study was performed to reduce the failure rate and time required in intravenous injection by providing augmented vein structures that back-project superimposed veins on the skin surface of the hand. Images of the subcutaneous vein are captured by two industrial cameras with extra reflective near-infrared lights. The veins are then segmented by a multiple-feature clustering method. Vein structures captured by the two cameras are matched and reconstructed based on the epipolar constraint and homographic property. The skin surface is reconstructed by active structured light with spatial encoding values and fusion displayed with the reconstructed vein. The vein and skin surface are both reconstructed in the 3D space. Results show that the structures can be precisely back-projected to the back of the hand for further augmented display and visualization. The overall system performance is evaluated in terms of vein segmentation, accuracy of vein matching, feature points distance error, duration times, accuracy of skin reconstruction, and augmented display. All experiments are validated with sets of real vein data. The imaging and augmented system produces good imaging and augmented reality results with high speed. PMID:27446690

  19. Dorsal Augmentation in Rhinoplasty: A Survey and Review.

    Science.gov (United States)

    Malone, Melanie; Pearlman, Steven

    2015-06-01

    Understanding the nuanced practices and grafting options of dorsal augmentation will improve outcomes and results in rhinoplasty. To better understand the practices of dorsal augmentation among our colleagues. To review the current literature regarding the indications, safety profiles, and outcomes of different materials used in dorsal augmentation. A PubMed search was performed to capture current articles containing reviews or large series regarding the safety and efficacy of various grafting materials used for dorsal augmentation. Of the many options available, autologous cartilage grafts maintain widespread use for dorsal augmentation and other techniques in rhinoplasty. Homologous cartilage grafts, namely irradiated rib, are a preferred alternative. Irradiated costal cartilage has been shown to have low complication rates and is unique in its abundance of supply, particularly in the revision rhinoplasty. Alloplastic implants, particularly silicone, are prevalent in Asian countries where they are a popular first-line choice. ePTFE has a favorable complication profile in primary rhinoplasty; however, caution is recommended when using ePTFE in revision cases. Porous polyethylene has a higher risk of associated complications than the other alloplastic implants listed, and therefore should be considered thoughtfully. Although cartilage is often the preferred graft for dorsal augmentation, there are many other autogenous, homologous, and alloplastic materials that have been shown to be safe and effective choices when applied in the proper setting. PMID:26126225

  20. Dielectric relaxations investigation of a synthesized epoxy resin polymer

    Science.gov (United States)

    Jilani, Wissal; Mzabi, Nissaf; Gallot-Lavallée, Olivier; Fourati, Najla; Zerrouki, Chouki; Zerrouki, Rachida; Guermazi, Hajer

    2015-04-01

    A diglycidylether of bisphenol A (DGEBA) epoxy resin was synthesized, and cured with 3,3'-diaminodiphenyl sulfone (DDS) at a curing temperature of 120 °C. The relaxation properties of the realized polymers were studied by two complementary techniques: dielectric relaxation spectroscopy (DRS), in the temperature range 173-393K and in the frequency interval 10-1-106 Hz, and thermally stimulated depolarization current (TSDC) with a windowing polarization process. Current-voltage (I-V) measurements were also carried out to study interfacial relaxations. Dielectric data were analyzed in terms of permittivity and electric modulus variations. Three relaxation processes ( γ, β and α) have been identified. They were found to be frequency and temperature dependent and were interpreted in terms of the Havriliak-Negami approach. Relaxation parameters were determined by fitting the experimental data. The temperature dependence of the relaxation time was well fitted by the Arrhenius law for secondary relaxations, while the Vogel-Fulcher-Tamann model was found to better fit the τ( T) variations for α relaxation. We found τ 0 = 4.9 10-12 s, 9.6 10-13 s and 1.98 10-7 s for γ, β and α relaxations, respectively. The obtained results were found to be consistent with those reported in the literature. Due to the calculation of the low-frequency data of dielectric loss by the Hamon approximation, the Maxwell-Wagner-Sillars (MWS) relaxation was highlighted.

  1. Dielectric relaxation of CdO nanoparticles

    Science.gov (United States)

    Tripathi, Ramna; Dutta, Alo; Das, Sayantani; Kumar, Akhilesh; Sinha, T. P.

    2016-02-01

    Nanoparticles of cadmium oxide have been synthesized by soft chemical route using thioglycerol as the capping agent. The crystallite size is determined by X-ray diffraction technique and the particle size is obtained by transmission electron microscope. The band gap of the material is obtained using Tauc relation to UV-visible absorption spectrum. The photoluminescence emission spectra of the sample are measured at various excitation wavelengths. The molecular components in the material have been analyzed by FT-IR spectroscopy. The dielectric dispersion of the material is investigated in the temperature range from 313 to 393 K and in the frequency range from 100 Hz to 1 MHz by impedance spectroscopy. The Cole-Cole model is used to describe the dielectric relaxation of the system. The scaling behavior of imaginary part of impedance shows that the relaxation describes the same mechanism at various temperatures. The frequency-dependent electrical data are also analyzed in the framework of conductivity and electrical modulus formalisms. The frequency-dependent conductivity spectra are found to obey the power law.

  2. Anomalous magnetoconductivity and relaxation times in holography

    CERN Document Server

    Jimenez-Alba, Amadeo; Liu, Yan; Sun, Ya-Wen

    2015-01-01

    We study the magnetoconductivity induced by the axial anomaly via the chiral magnetic effect in strongly coupled holographic models. An important ingredient in our models is that the axial charge is non-conserved beyond the axial anomaly. We achieve this either by explicit symmetry breaking via a non-vanishing non-normalisable mode of an axially charged scalar or using a Stuckelberg field to make the AdS-bulk gauge field massive. The DC magnetoconductivites can be calculated analytically. They take a universal form in terms of gauge field mass at the horizon and quadratic dependence on the magnetic field. The axial charge relaxation time grows linearly with magnetic field in the large $B$ regime. Most strikingly positive magnetoconductivity is still present even when the relaxation times are short $\\tau_5 \\approx 1/(\\pi T)$ and the axial charge can not be thought of as an approximate symmetry. In the $U(1)_A$ explicit breaking model, we also observe that the axial magnetic conductivity in the limit of strong ...

  3. A Simple Holographic Superconductor with Momentum Relaxation

    CERN Document Server

    Kim, Keun-Young; Park, Miok

    2015-01-01

    We study a holographic superconductor model with momentum relaxation due to massless scalar fields linear to spatial coordinates($\\psi_I = \\beta \\delta_{Ii} x^i$), where $\\beta$ is the strength of momentum relaxation. In addition to the original superconductor induced by the chemical potential($\\mu$) at $\\beta=0$, there exists a new type of superconductor induced by $\\beta$ even at $\\mu=0$. It may imply a new `pairing' mechanism of particles and antiparticles interacting with $\\beta$, which may be interpreted as `impurity'. Two parameters $\\mu$ and $\\beta$ compete in forming superconducting phase. As a result, the critical temperature behaves differently depending on $\\beta/\\mu$. It decreases when $\\beta/\\mu$ is small and increases when $\\beta/\\mu$ is large, which is a novel feature compared to other models. After analysing ground states and phase diagrams for various $\\beta/\\mu$, we study optical electric($\\sigma$), thermoelectric($\\alpha$), and thermal($\\bar{\\kappa}$) conductivities. When the system undergo...

  4. Augmented reality for biomedical wellness sensor systems

    Science.gov (United States)

    Jenkins, Jeffrey; Szu, Harold

    2013-05-01

    Due to the commercial move and gaming industries, Augmented Reality (AR) technology has matured. By definition of AR, both artificial and real humans can be simultaneously present and realistically interact among one another. With the help of physics and physiology, we can build in the AR tool together with real human day-night webcam inputs through a simple interaction of heat transfer -getting hot, action and reaction -walking or falling, as well as the physiology -sweating due to activity. Knowing the person age, weight and 3D coordinates of joints in the body, we deduce the force, the torque, and the energy expenditure during real human movements and apply to an AR human model. We wish to support the physics-physiology AR version, PPAR, as a BMW surveillance tool for senior home alone (SHA). The functionality is to record senior walking and hand movements inside a home environment. Besides the fringe benefit of enabling more visits from grand children through AR video games, the PP-AR surveillance tool may serve as a means to screen patients in the home for potential falls at points around in house. Moreover, we anticipate PP-AR may help analyze the behavior history of SHA, e.g. enhancing the Smartphone SHA Ubiquitous Care Program, by discovering early symptoms of candidate Alzheimer-like midnight excursions, or Parkinson-like trembling motion for when performing challenging muscular joint movements. Using a set of coordinates corresponding to a set of 3D positions representing human joint locations, we compute the Kinetic Energy (KE) generated by each body segment over time. The Work is then calculated, and converted into calories. Using common graphics rendering pipelines, one could invoke AR technology to provide more information about patients to caretakers. Alerts to caretakers can be prompted by a patient's departure from their personal baseline, and the patient's time ordered joint information can be loaded to a graphics viewer allowing for high

  5. Cement leakage in pedicle screw augmentation: a prospective analysis of 98 patients and 474 augmented pedicle screws.

    Science.gov (United States)

    Mueller, Jan U; Baldauf, Joerg; Marx, Sascha; Kirsch, Michael; Schroeder, Henry W S; Pillich, Dirk T

    2016-07-01

    OBJECTIVE Loosening and pullout of pedicle screws are well-known problems in pedicle screw fixation surgery. Augmentation of pedicle screws with bone cement, first described as early as 1975, increases the pedicle-screw interface and pullout force in osteoporotic vertebrae. The aim of the present study was to identify cement leakage and pulmonary embolism rates in a large prospective single-center series of pedicle screw augmentations. METHODS All patients who underwent cement-augmented pedicle screw placement between May 2006 and October 2010 at the authors' institution were included in this prospective cohort study. Perivertebral cement leakage and pulmonary cement embolism were evaluated with a CT scan of the area of operation and with a radiograph of the chest, respectively. RESULTS A total of 98 patients underwent placement of cement-augmented pedicle screws; 474 augmented screws were inserted in 237 vertebrae. No symptomatic perivertebral cement leakage or symptomatic pulmonary cement embolism was observed, but asymptomatic perivertebral cement leakage was seen in 88 patients (93.6%) and in 165 augmented vertebrae (73.3%). Cement leakage most often occurred in the perivertebral venous system. Clinically asymptomatic pulmonary cement embolism was found in 4 patients (4.1%). CONCLUSIONS Perivertebral cement leakage often occurs in pedicle screw augmentation, but in most cases, it is clinically asymptomatic. Cement augmentation should be performed under continuous fluoroscopy to avoid high-volume leakage. Alternative strategies, such as use of expandable screws, should be examined in more detail for patients at high risk of screw loosening. PMID:26943258

  6. Activation of G protein-coupled estrogen receptor induces endothelium-independent relaxation of coronary artery smooth muscle

    Science.gov (United States)

    Yu, Xuan; Ma, Handong; Barman, Scott A.; Liu, Alexander T.; Sellers, Minga; Stallone, John N.; Prossnitz, Eric R.; White, Richard E.

    2011-01-01

    Estrogens can either relax or contract arteries via rapid, nongenomic mechanisms involving classic estrogen receptors (ER). In addition to ERα and ERβ, estrogen may also stimulate G protein-coupled estrogen receptor 1 (GPER) in nonvascular tissue; however, a potential role for GPER in coronary arteries is unclear. The purpose of this study was to determine how GPER activity influenced coronary artery reactivity. In vitro isometric force recordings were performed on endothelium-denuded porcine arteries. These studies were augmented by RT-PCR and single-cell patch-clamp experiments. RT-PCR and immunoblot studies confirmed expression of GPER mRNA and protein, respectively, in smooth muscle from either porcine or human coronary arteries. G-1, a selective GPER agonist, produced a concentration-dependent relaxation of endothelium-denuded porcine coronary arteries in vitro. This response was attenuated by G15, a GPER-selective antagonist, or by inhibiting large-conductance calcium-activated potassium (BKCa) channels with iberiotoxin, but not by inhibiting NO signaling. Last, single-channel patch-clamp studies demonstrated that G-1 stimulates BKCa channel activity in intact smooth muscle cells from either porcine or human coronary arteries but had no effect on channels isolated in excised membrane patches. In summary, GPER activation relaxes coronary artery smooth muscle by increasing potassium efflux via BKCa channels and requires an intact cellular signaling mechanism. This novel action of estrogen-like compounds may help clarify some of the controversy surrounding the vascular effects of estrogens. PMID:21791623

  7. Cross-relaxation in multiple pulse NQR spin-locking

    International Nuclear Information System (INIS)

    The experimental and theoretical NQR multiple-pulse spin locking study of cross-relaxation process in solids containing nuclei of two different sorts I > 1/2 and S = 1/2 coupled by the dipole-dipole interactions and influenced by an external magnetic field. Two coupled equations for the inverse spin temperatures of the both spin systems describing the mutual spin lattice relaxation and the cross-relaxation were obtained using the method of the nonequilibrium state operator. It is shown that the relaxation process is realized with non-exponential time dependence describing by a sum of two exponents. The cross relaxation time is calculated as a function of the multiple-pulse field parameters which agree with the experimental data. The calculated magnetization cross relaxation time vs the strength of the applied magnetic field agrees well with the obtained experimental data.

  8. Nuclear spin relaxation in liquids theory, experiments, and applications

    CERN Document Server

    Kowalewski, Jozef

    2006-01-01

    Nuclear magnetic resonance (NMR) is widely used across many fields because of the rich data it produces, and some of the most valuable data come from the study of nuclear spin relaxation in solution. While described to varying degrees in all major NMR books, spin relaxation is often perceived as a difficult, if not obscure, topic, and an accessible, cohesive treatment has been nearly impossible to find.Collecting relaxation theory, experimental techniques, and illustrative applications into a single volume, this book clarifies the nature of the phenomenon, shows how to study it, and explains why such studies are worthwhile. Coverage ranges from basic to rigorous theory and from simple to sophisticated experimental methods, and the level of detail is somewhat greater than most other NMR texts. Topics include cross-relaxation, multispin phenomena, relaxation studies of molecular dynamics and structure, and special topics such as relaxation in systems with quadrupolar nuclei and paramagnetic systems.Avoiding ove...

  9. Improving target detection in visual search through the augmenting multi-sensory cues

    NARCIS (Netherlands)

    Hancock, P.A.; Mercado, J.E.; Merlo, J.; Erp, J.B.F. van

    2013-01-01

    The present experiment tested 60 individuals on a multiple screen, visual target detection task. Using a within-participant design, individuals received no-cue augmentation, an augmenting tactile cue alone, an augmenting auditory cue alone or both of the latter augmentations in combination. Results

  10. Intraband Relaxation and Its Influences on Quantum Dot Lasers

    Institute of Scientific and Technical Information of China (English)

    DENG Sheng-Ling; HUANG Yong-Zhen; YU Li-Juan

    2005-01-01

    @@ A comprehensive two-level numerical model is developed to describe carrier distribution in a quantum-dot laser. Light-emission spectra with different intraband relaxation rates (2ps, 7.5ps and 20ps) are calculated and analysed to investigate the influence of relaxation rates on performance of the quantum-dot laser. The results indicate that fast intraband relaxation favours not only the ground state single mode operation but also the higher injection efficiency.

  11. Psychophysiological Effects of Applied Relaxation in Generalized Anxiety Disorder

    OpenAIRE

    Conrad, Ansgar

    2006-01-01

    Several authors have reported greater muscle tension in Generalized Anxiety Disorder (GAD) patients than in non-anxious controls, and muscle relaxation therapy (MRT) is as clinically effective in the treatment of GAD as Cognitive-Behavior Therapy. MRT assumes that GAD patients lack the ability to relax, but can learn this in therapy. We tested these assumptions by recruiting 49 GAD patients and randomizing them to individualized 12-week Applied Relaxation (AR) treatment (Öst, 1987) or to...

  12. Chemical Hair Relaxers Have Adverse Effects a Myth or Reality

    OpenAIRE

    Shetty, Vinma H; Shetty, Narendra J; Nair, Dhanya Gopinath

    2013-01-01

    Context: Hair plays an important role in one's personality and builds confidence. Now-a-days, chemical hair relaxers are used very commonly in the society. We document the adverse effects reported by the sample that have used any one of the professional chemical hair relaxers. Aim: To study the adverse effects reported by the sample who underwent repeated chemical hair relaxing. Settings and Design: Cross-sectional questionnaire based study done on a sample taken from a medical college and ho...

  13. Methodologic aspects of acetylcholine-evoked relaxation of rabbit aorta.

    Science.gov (United States)

    Hansen, K; Nedergaard, O A

    1999-08-01

    The acetylcholine-evoked relaxation of rabbit isolated thoracic aorta precontracted by phenylephrine was studied. Phenylephrine caused a steady contraction that was maintained for 6 h. In the presence of calcium disodium ethylenediaminetetraacetate (EDTA) and ascorbic acid the contraction decreased with time. N(G)-Nitro-L-arginine abolished the inhibitory effect of EDTA and ascorbic acid. Acetylcholine evoked a rapid concentration-dependent relaxation that recovered spontaneously and slowly, but fully, with time. Relaxation evoked by equieffective concentrations of carbachol and acetylcholine had the same time course. Cumulative addition of acetylcholine (10(-7)-3 x 10(-5) M) caused a marked relaxation that was reverted slightly at high concentrations. The relaxation was the same with rings derived from the upper, middle, and lower part of the thoracic aorta. Two consecutive concentration-response curves for acetylcholine obtained at a 2-h interval demonstrated a slight development of tachyphylaxis. The relaxation was inversely related to precontractile tension evoked by phenylephrine when expressed as a percentage, but independent when expressed as g tension. Storage of aorta in cold salt solution for 24 h did not alter the relaxation. EDTA and ascorbic acid did not alter the relaxation. It is concluded that (1) EDTA and ascorbic acid can not be used with impunity to stabilize catecholamines used as preconstriction agents; (2) the reversal of the acetylcholine-evoked relaxation is not due to hydrolysis of acetylcholine; (3) the relaxation is uniform in all segments of thoracic aorta; (4) cold storage of aorta does not alter the relaxation; and (5) acetylcholine releases the same amount of relaxing factor, irrespective of the precontractile tension. PMID:10691020

  14. Relaxation Behaviour of Lithium-Borosilicate Glasses

    Directory of Open Access Journals (Sweden)

    D. B. Thombre

    2014-01-01

    Full Text Available Three systems of lithium borosilicate (LBS glasses namely SI 42.5Li2O: (57.5-x B2O3: xSiO2, SII 42.5Li2O: xB2O3 :( 57.5-x SiO2 where x=0, 5, 10, 20, and 30, and SIII (100-2x Li2O: xB2O3: xSiO2 where x=30, 28.75, 27.5, 25, and 22.5, are prepared using conventional melt quenching technique. Functional dependence of conductivity on temperature in the range from 523- 673K and frequency in the range from 10Hz to 13 MHz is studied. In order to analyze electrical conductivity the microscopic parameters such as ionic jump distance and barrier height are necessary. These parameters can be understood properly on the basis of the models proposed by Almond and Elliott. As frequency increases from 1MHz to 13MHz, the Tmin shifts towards low temperature side. According to this model the charge transfer is a thermally activated process and provides a correlation between the barrier height (W and the hopping length (R. The fitting of conductivity data into Almond-West type power law behavior σ = σ(o + Aωs yielded power law exponent(s. Electrical conductivity data fitted well in Elliott’s model, which is true only for amorphous materials. The temperature dependence of frequency exponent s exhibits a minimum (smin at a particular temperature (Tmin . . From the scaling behavior of the ac conductivity it is seen that all the curves scaled better, suggesting that s is temperature independent. It is observed that smin shifts to lower temperature, which shows that electrical conductivity of glassy solid electrolytes is the manifestation of ionic dynamic processes. The superposition of the reduced conductivity at all temperatures shows relaxation mechanism is temperature independent. Analysis of modulus formalism with a distribution of relaxation times using KWW stretched exponential function, the stretching exponent, β, is depend on temperature. The analysis of the temperature variation of the M″ peak indicates the relaxation process is thermally activated

  15. Phonon relaxation of subgap levels in superconducting quantum point contacts

    International Nuclear Information System (INIS)

    Superconducting quantum point contacts (SQPC) are known to possess two subgap states per each propagating mode. The phonon relaxation in SQPC is considered for the case, when the superconducting phases on the contact terminal ase assumed to be rigidly fixed. The direct relaxation rate of subgap states in SQPC with the emission of an acoustic phonon is calculated at low temperature T. If the reflection in the contact is small, the relaxation time may become much longer than the characteristic lifetime of a bulk quasiparticle. The relaxation rate does not vanish T → 0, but it is strongly suppressed in the case of a nearly ballistic contact

  16. Observation of the relaxivity and thickness of surface phase in porous rock with the combination of PFG NMR and relaxation measurements

    Institute of Scientific and Technical Information of China (English)

    肖立志; 杜有如; 叶朝辉

    1996-01-01

    Nuclear magnetic resonance (NMR) relaxation of fluids in porous media is affected by the solid-liquid interface. Quantitative determination of the surface relaxivity is significantly important for both investigation and application of relaxation mechanisms in porous media. A method to estimate the surface relaxivity with the combination of relaxation and diffusion measurements is proposed. According to this method, a criterion for testing the current diffusion and relaxation theory for porous media is available.

  17. Scheduled Relaxation Jacobi method: improvements and applications

    CERN Document Server

    Adsuara, J E; Cerdá-Durán, P; Aloy, M A

    2015-01-01

    Elliptic partial differential equations (ePDEs) appear in a wide variety of areas of mathematics, physics and engineering. Typically, ePDEs must be solved numerically, which sets an ever growing demand for efficient and highly parallel algorithms to tackle their computational solution. The Scheduled Relaxation Jacobi (SRJ) is a promising class of methods, atypical for combining simplicity and efficiency, that has been recently introduced for solving linear Poisson-like ePDEs. The SRJ methodology relies on computing the appropriate parameters of a multilevel approach with the goal of minimizing the number of iterations needed to cut down the residuals below specified tolerances. The efficiency in the reduction of the residual increases with the number of levels employed in the algorithm. Applying the original methodology to compute the algorithm parameters with more than 5 levels notably hinders obtaining optimal SRJ schemes, as the mixed (non-linear) algebraic-differential equations from which they result bec...

  18. Relaxation and resonances in fluctuating dielectric systems

    Science.gov (United States)

    Garcia-Colin, L. S.; del Castillo, L. F.

    1989-09-01

    In this paper we show how the ideas behind extended irreversible thermodynamics are used to generate a systematic treatment of the relaxation and resonance phenomena in the propagation and absorption of electromagnetic energy in dielectric materials in a nonequilibrium state. Two cases are discussed: the first, in which the forced oscillations arising from the correlation between the fluctuations of the polarization vector and the electric field are neglected, and the second, in which this term is taken into account. In both cases we show how the main equations serve to make a connection between the macroscopic approach followed here and a number of results obtained for both, gases and polar liquids using molecular models. The results obtained here are compared with previous work on this problem, and new effects arising from the second case are pointed out.

  19. Mirror Cosmological Relaxation of the Electroweak Scale

    CERN Document Server

    Matsedonskyi, Oleksii

    2015-01-01

    The cosmological relaxation mechanism proposed in [1] allows for a dynamically generated large separation between the weak scale and a theory cutoff, using a sharp change of theory behaviour upon crossing the limit between unbroken and broken symmetry phases. In this note we present a variation of this scenario, in which stabilization of the electroweak scale in the right place is ensured by the $Z_2$ symmetry exchanging the Standard Model (SM) with its mirror copy. We sketch the possible ways to produce viable thermal evolution of the Universe and discuss experimental accessibility of the new physics effects. We show that in this scenario the mirror SM can either have sizeable couplings with the ordinary one, or, conversely, can interact with it with a negligible strength. The overall cutoff allowed by such a construction can reach $10^9$ GeV.

  20. Internal relaxation time in immersed particulate materials

    CERN Document Server

    Rognon, P; Gay, C

    2009-01-01

    We study the dynamics of the solid to liquid transition for a model material made of elastic particles immersed in a viscous fluid. The interaction between particle surfaces includes their viscous lubrication, a sharp repulsion when they get closer than a tuned steric length and their elastic deflection induced by those two forces. We use Soft Dynamics to simulate the dynamics of this material when it experiences a step increase in the shear stress and a constant normal stress. We observe a long creep phase before a substantial flow eventually establishes. We find that the typical creep time relies on an internal relaxation process, namely the separation of two particles driven by the applied stress and resisted by the viscous friction. This mechanism should be relevant for granular pastes, living cells, emulsions and wet foams.

  1. Nonlinear nonequilibrium quasiparticle relaxation in Josephson junctions.

    Science.gov (United States)

    Krasnov, V M

    2009-11-27

    I solve numerically a full set of nonlinear kinetic balance equations for stacked Josephson junctions, which allows analysis of strongly nonequilibrium phenomena. It is shown that nonlinearity becomes significant already at very small disequilibrium. The following new, nonlinear effects are obtained: (i) At even-gap voltages V = 2nDelta/e (n = 2, 3, ...) nonequilibrium bosonic bands overlap. This leads to enhanced emission of Omega = 2Delta bosons and to the appearance of dips in tunnel conductance. (ii) A new type of radiative solution is found at strong disequilibrium. It is characterized by the fast stimulated relaxation of quasiparticles. A stack in this state behaves as a light emitting diode and directly converts electric power to boson emission, without utilization of the ac-Josephson effect. The phenomenon can be used for realization of a new type of superconducting cascade laser in the THz frequency range.

  2. Multichannel applications of double relaxation oscillation SQUIDs

    Science.gov (United States)

    Lee, Yong-Ho; Kwon, Hyukchan; Kim, Jin-Mok; Park, Yong-Ki

    2001-12-01

    Double relaxation oscillation SQUIDs (DROSs) provided high flux-to-voltage transfers of larger than 1 mV Φ0-1 and simple flux-locked loop circuits were used for SQUID operation. We constructed two multichannel systems based on DROSs. The first system is a 40-channel planar gradiometer system consisting of integrated first-order pickup coils. average noise level of the 40 channels is 1 fT cm-1 Hz-1/2 at 100 Hz, corresponding to a field noise of 4 fT Hz-1/2, operating inside a magnetically shielded room. The second one is a 37-channel magnetometer system with 37 integrated magnetometers distributed on a spherical surface and measures field component normal to the head surface. The average noise of the magnetometers is 3 fT Hz-1/2 at 100 Hz. The two systems were applied to measure neuromagnetic fields.

  3. Gravitational relaxation of electroweak hierarchy problem

    CERN Document Server

    Matsui, Hiroki

    2016-01-01

    The current status of the LHC experiments has aggravated the electroweak hierarchy problem as severe as the cosmological constant problem. Therefore, recently, theoretically different approaches to the electroweak hierarchy problem have been explored. In the present paper, we formulate several gravitational relaxation scenarios for the electroweak hierarchy problem. These scenarios assume that the frame of the the high-energy theory is essentially different from the frame of the Standard Model and the dimensional parameters as the Higgs boson mass or the cosmological constant depend on the parameter of the conformal transformation. Therefore, the Higgs boson mass and the cosmological constant of the ultraviolet (UV) cut-off scale order are sufficiently suppressed and sequestered via the conformal transformation. In these scenarios, the electroweak scale becomes natural without invoking supersymmetry or any other new physics at the low-energy scale by requiring modification of the gravitational sector.

  4. Degravitation and the relaxed Einstein equations

    CERN Document Server

    Dirkes, Alain

    2016-01-01

    The general idea to modify Einstein's field equations by promoting Newton's constant $G$ to a covariant differential operator $G_\\Lambda(\\Box_g)$ was apparently outlined for the first time in [12-15]. The modification itself originates from the quest of finding a mechanism which is able to degravitate the vacuum energy on cosmological scales. We present in this article a precise covariant coupling model which acts like a high-pass filter with a macroscopic distance filter scale $\\sqrt{\\Lambda}$. In the context of this particular theory of gravity we work out the effective relaxed Einstein equations as well as the effective 1.5 post-Newtonian total near-zone mass of a many body system. We observe that at any step of computation we recover in the limit of vanishing modification parameters the corresponding general relativistic result.

  5. Various Time-Scales of Relaxation

    CERN Document Server

    Ali-Akbari, M; Ebrahim, H; Shahkarami, L

    2016-01-01

    Via gauge-gravity duality, relaxation of far-from-equilibrium initial states in a strongly coupled gauge theory has been investigated. In the system we consider in this paper there are two ways where the state under study can deviate from its equilibrium: anisotropic pressure and time-dependent expectation value of a scalar operator with \\Delta=2. In the gravity theory, this system corresponds to Einstein's general relativity with a non-trivial metric, including the anisotropy function, coupled to a massive scalar matter field. We study the effect of different initial configurations for scalar field and anisotropy function on physical processes such as thermalization, i.e. time evolution of event horizon, equilibration of the expectation value of scalar operator and isotropization. We also discuss time ordering of these time-scales.

  6. Multichannel applications of double relaxation oscillation Squids

    International Nuclear Information System (INIS)

    Double relaxation oscillation SQUIDs (DROSs) provided high flux-to-voltage transfers of larger than 1 mV Φ0-1 and simple flux-locked loop circuits were used for SQUID operation. We constructed two multichannel systems based on DROSs. The first system is a 40-channel planar gradiometer system consisting of integrated first-order pickup coils. average noise level of the 40 channels is 1 fT cm-1 Hz-1/2 at 100 Hz, corresponding to a field noise of 4 fT Hz-1/2, operating inside a magnetically shielded room. The second one is a 37-channel magnetometer system with 37 integrated magnetometers distributed on a spherical surface and measures field component normal to the head surface. The average noise of the magnetometers is 3 fT Hz-1/2 at 100 Hz. The two systems were applied to measure neuromagnetic fields. (author)

  7. Structural relaxation of metallic glass forming melts

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The fragility of superheated melts, M, for 13 kinds of metallic alloys has been evaluated from the data of the dynamic viscosity above their liquidus temperatures. The authors find that the glass forming ability of metallic melts depends on the fragility of superheated melts rather than on the value of viscosity. In the present work the value of fragility is less than 1 for good glass-forming melts but more than 1 for the other melts. The variation rate of atomic coordination number with temperature indicates clearly the relaxation rate of molten structures. The fragility of superheated melts is found in good agreement with the variation rate of the atomic coordination number with temperature.

  8. Plasma Relaxation and Topological Aspects in Electronmagnetohydrodynamics

    CERN Document Server

    Shivamoggi, B K

    2016-01-01

    Parker's formulation of isotopological plasma relaxation process toward minimum magnetics energy states in magnetohydrodynamics (MHD) is extended to electron MHD (EMHD). The lower bound on magnetic energy in EMHD is determined by both the magnetic field and the electron vorticity field topologies, and is shown to be reduced further in EMHD by an amount proportional to the sum of total electron-flow kinetic energy and total electron-flow enstrophy. The EMHD Beltrami condition becomes equivalent to the potential vorticity conservation equation in two-dimensional (2D) hydrodynamics, and the torsion coefficient and turns out to be proportional to potential vorticity. The winding pattern of the magnetic field lines appears to evolve therefore in the same way as "potential vorticity" lines in 2D hydrodynamics.

  9. Grueneisen relaxation photoacoustic microscopy in vivo

    Science.gov (United States)

    Ma, Jun; Shi, Junhui; Hai, Pengfei; Zhou, Yong; Wang, Lihong V.

    2016-06-01

    Grueneisen relaxation photoacoustic microscopy (GR-PAM) can achieve optically defined axial resolution, but it has been limited to ex vivo demonstrations so far. Here, we present the first in vivo image of a mouse brain acquired with GR-PAM. To induce the GR effect, an intensity-modulated continuous-wave laser was employed to heat absorbing objects. In phantom experiments, an axial resolution of 12.5 μm was achieved, which is sixfold better than the value achieved by conventional optical-resolution PAM. This axial-resolution improvement was further demonstrated by imaging a mouse brain in vivo, where significantly narrower axial profiles of blood vessels were observed. The in vivo demonstration of GR-PAM shows the potential of this modality for label-free and high-resolution anatomical and functional imaging of biological tissues.

  10. Using relaxational dynamics to reduce network congestion

    Science.gov (United States)

    Piontti, Ana L. Pastore y.; La Rocca, Cristian E.; Toroczkai, Zoltán; Braunstein, Lidia A.; Macri, Pablo A.; López, Eduardo

    2008-09-01

    We study the effects of relaxational dynamics on congestion pressure in scale-free (SF) networks by analyzing the properties of the corresponding gradient networks (Toroczkai and Bassler 2004 Nature 428 716). Using the Family model (Family and Bassler 1986 J. Phys. A: Math. Gen. 19 L441) from surface-growth physics as single-step load-balancing dynamics, we show that the congestion pressure considerably drops on SF networks when compared with the same dynamics on random graphs. This is due to a structural transition of the corresponding gradient network clusters, which self-organize so as to reduce the congestion pressure. This reduction is enhanced when lowering the value of the connectivity exponent λ towards 2.

  11. STAR: Speech Therapy with Augmented Reality for children with autism spectrum disorders

    OpenAIRE

    Silva,Camilla Almeida da; Fernandes, António Ramires; Grohmann, Ana Paula

    2015-01-01

    Graphics based systems of Augmented and Alternative Communication are widely used to promote communication in people with Autism Spectrum Disorders. This study discusses an integration of Augmented Reality in communication interventions, by relating elements of Augmented and Alternative Communication and Applied Behaviour Analysis strategies. An architecture for an Augmented Reality based interactive system to assist interventions is proposed. STAR provides an Augmented Reality tool to assi...

  12. Efficient early global relaxation of asteroid Vesta

    Science.gov (United States)

    Fu, Roger R.; Hager, Bradford H.; Ermakov, Anton I.; Zuber, Maria T.

    2014-09-01

    The asteroid Vesta is a differentiated planetesimal from the accretion phase of Solar System formation. Although its present-day shape is dominated by a non-hydrostatic fossil equatorial bulge and two large, mostly unrelaxed impact basins, Vesta may have been able to approach hydrostatic equilibrium during a brief early period of intense interior heating. We use a finite element viscoplastic flow model coupled to a 1D conductive cooling model to calculate the expected rate of relaxation throughout Vesta’s early history. We find that, given sufficient non-hydrostaticity, the early elastic lithosphere of Vesta experienced extensive brittle failure due to self-gravity, thereby allowing relaxation to a more hydrostatic figure. Soon after its accretion, Vesta reached a closely hydrostatic figure with scaled, is similar to the maximum disequilibrium of the hydrostatic asteroid Ceres. Vesta was able to support the modern observed amplitude of non-hydrostatic topography only >40-200 My after formation, depending on the assumed depth of megaregolith. The Veneneia and Rheasilvia giant impacts, which generated most non-hydrostatic topography, must have therefore occurred >40-200 My after formation. Based on crater retention ages, topography, and relation to known impact generated features, we identify a large region in the northern hemisphere that likely represents relic hydrostatic terrain from early Vesta. The long-wavelength figure of this terrain suggests that, before the two late giant impacts, Vesta had a rotation period of 5.02 h (6.3% faster than present) while its spin axis was offset by 3.0 ° from that of the present. The evolution of Vesta’s figure shows that the hydrostaticity of small bodies depends strongly on its age and specific impact history and that a single body may embody both hydrostatic and non-hydrostatic terrains and epochs.

  13. Gunner Goggles: Implementing Augmented Reality into Medical Education.

    Science.gov (United States)

    Wang, Leo L; Wu, Hao-Hua; Bilici, Nadir; Tenney-Soeiro, Rebecca

    2016-01-01

    There is evidence that both smartphone and tablet integration into medical education has been lacking. At the same time, there is a niche for augmented reality (AR) to improve this process through the enhancement of textbook learning. Gunner Goggles is an attempt to enhance textbook learning in shelf exam preparatory review with augmented reality. Here we describe our initial prototype and detail the process by which augmented reality was implemented into our textbook through Layar. We describe the unique functionalities of our textbook pages upon augmented reality implementation, which includes links, videos and 3D figures, and surveyed 24 third year medical students for their impression of the technology. Upon demonstrating an initial prototype textbook chapter, 100% (24/24) of students felt that augmented reality improved the quality of our textbook chapter as a learning tool. Of these students, 92% (22/24) agreed that their shelf exam review was inadequate and 19/24 (79%) felt that a completed Gunner Goggles product would have been a viable alternative to their shelf exam review. Thus, while students report interest in the integration of AR into medical education test prep, future investigation into how the use of AR can improve performance on exams is warranted.

  14. Gunner Goggles: Implementing Augmented Reality into Medical Education.

    Science.gov (United States)

    Wang, Leo L; Wu, Hao-Hua; Bilici, Nadir; Tenney-Soeiro, Rebecca

    2016-01-01

    There is evidence that both smartphone and tablet integration into medical education has been lacking. At the same time, there is a niche for augmented reality (AR) to improve this process through the enhancement of textbook learning. Gunner Goggles is an attempt to enhance textbook learning in shelf exam preparatory review with augmented reality. Here we describe our initial prototype and detail the process by which augmented reality was implemented into our textbook through Layar. We describe the unique functionalities of our textbook pages upon augmented reality implementation, which includes links, videos and 3D figures, and surveyed 24 third year medical students for their impression of the technology. Upon demonstrating an initial prototype textbook chapter, 100% (24/24) of students felt that augmented reality improved the quality of our textbook chapter as a learning tool. Of these students, 92% (22/24) agreed that their shelf exam review was inadequate and 19/24 (79%) felt that a completed Gunner Goggles product would have been a viable alternative to their shelf exam review. Thus, while students report interest in the integration of AR into medical education test prep, future investigation into how the use of AR can improve performance on exams is warranted. PMID:27046620

  15. Composite augmentation phalloplasty: personal experience after 275 patients

    Directory of Open Access Journals (Sweden)

    Juan Monreal

    2015-03-01

    Full Text Available Aim: To report the author's experience in augmentation phalloplasty by studying a retrospective series of patients who underwent fat grafting for girth enhancement or a composite technique based on suspensory ligament release plus fat grafting performed simultaneously. Methods: The author analyzed retrospectively the outcomes of 275 augmentation phalloplasty procedures performed in 259 patients until November 2013. Of these, 127 correspond to girth augmentation with fat grafting and 148 to composite augmentation phalloplasty (girth augmentation with fat grafting and length improvement by suspensory ligament release. In 16 patients girth and length enhancement were performed in two separate procedures. Results: Of this 259 patients, 87 underwent postoperative follow-up for at least 12 months and 160 patients underwent follow-up for at least 6 months. The average increase in circumference at 6 months was 1.7 cm (1.57 cm at 12 months and the average increase in length of 3.2 cm (3.1 cm at 12 months. Twenty-two patients showed minor complications that were treated without sequelae and without influencing the final result. Conclusion: By judicious use of currently available techniques, it is possible to achieve stable increases in penis size. The use of composite techniques provides better final results than the use of individual techniques performed alone due to the increase of the actual volume of the penis. An adequate informed consent is essential in all patients due to the unrealistic expectations expressed by the majority of them.

  16. Effect of pressure relaxation during the laser heating and electron-ion relaxation stages

    Energy Technology Data Exchange (ETDEWEB)

    Chimier, B.; Tikhonchuk, V.T.; Hallo, L. [Univ Bordeaux 1, CEA, CNRS, CELIA, UMR 5107, 33 - Talence (France)

    2008-09-15

    The multi-phase equation of state by Bushman et al. (Sov. Tech. Rev. 5:1-44, 2008) is modified to describe states with different electron and ion temperatures and it is applied to the non-equilibrium evolution of an aluminum sample heated by a subpicosecond laser pulse. The sample evolution is described by the two-temperature model for the electron and ion temperatures, while the pressure and density are described by a simplified relaxation equation. The pressure relaxation in the heating stage reduces the binding energy and facilitates the electron-driven ablation. The model is applied to estimate the ablation depth of an Al target irradiated by a subpicosecond laser pulse. It improves the agreement with the experimental data and provides a new explanation of the ablation process. (authors)

  17. A Proposal for Stress Management Using Serious Games Associated to Virtual and Augmented Reality

    Directory of Open Access Journals (Sweden)

    Renato de Aquino Lopes

    2014-06-01

    Full Text Available Occupational stress is a serious problem that affects a large number of workers. Regardless financial or social status, age and profession, a person exposed to stress may develop health problems that can interfere with work and his quality of life. Thus, due to absenteeism and reduced productivity, companies lose money when its employees are stressed. In this scenario, it is important that employees use strategies to deal with such drawback. Coping with occupational stress can be basically achieved, in two ways: problem-focused or emotion-focused. Literature shows that strategies which take the needs of individual workers into account have a greater chance of success. On the other hand, computer games, mainly those based upon Virtual and Augmented Reality (VR/AR techniques, offer players some experiences like: relaxation, sense of control, challenges, learning opportunities and immersion. These characteristics can contribute to the control process of occupational stress. The objective of this paper is to propose a new methodology for occupational stress, focused on emotion. In so doing, we use Serious Games and VR/AR techniques, considering particular needs of the employee.

  18. Visualization Cardiac Human Anatomy using Augmented Reality Mobile Application

    Directory of Open Access Journals (Sweden)

    Al Hamidy Hazidar

    2014-05-01

    Full Text Available Augmented Reality (AR is currently widely researched and rapidly evolving. This technology supplements the real world with composite 3D virtual objects that are integrated into the real world. This technology is very interesting and interactive. Augmented reality and Smartphone used as well as the interactive media and rarely used as a medium for the introduction of the human bodies. The aim of Cardiac Learning Detection (CLD assists students in the medical field in understanding the concepts of learning materials presented interactively by the system, especially cardiac anatomy human bodies and is able to provide more information than delivered through conventional teaching methods. For this reason, in this research were made augmented reality on visual technique as a medium to introduce the cardiac anatomy human

  19. Augmented reality three-dimensional display with light field fusion.

    Science.gov (United States)

    Xie, Songlin; Wang, Peng; Sang, Xinzhu; Li, Chengyu

    2016-05-30

    A video see-through augmented reality three-dimensional display method is presented. The system that is used for dense viewpoint augmented reality presentation fuses the light fields of the real scene and the virtual model naturally. Inherently benefiting from the rich information of the light field, depth sense and occlusion can be handled under no priori depth information of the real scene. A series of processes are proposed to optimize the augmented reality performance. Experimental results show that the reconstructed fused 3D light field on the autostereoscopic display is well presented. The virtual model is naturally integrated into the real scene with a consistence between binocular parallax and monocular depth cues. PMID:27410076

  20. Marker-Based Embodied Interaction for Handheld Augmented Reality Games

    Directory of Open Access Journals (Sweden)

    Michael Rohs

    2007-05-01

    Full Text Available This article deals with embodied user interfaces for handheld augmented reality games, which consist of both physical and virtual components. We have developed a number of spatial interaction techniques that optically capture the device’s movement and orientation relative to a visual marker. Such physical interactions in 3D space enable manipulative control of mobile games. In addition to acting as a physical controller that recognizes multiple game-dependent gestures, the mobile device augments the camera view with graphical overlays. We describe three game prototypes that use ubiquitous product packaging and other passive media as backgrounds for handheld augmentation. The prototypes can be realized on widely available off-the-shelf hardware and require only minimal setup and infrastructure support.

  1. Temporal suppression and augmentation of click-evoked otoacoustic emissions

    DEFF Research Database (Denmark)

    Verhulst, Sarah; Harte, James; Dau, Torsten

    2008-01-01

    This study investigates and models temporal suppression of click-evoked otoacoustic emissions (CEOAEs). This suppression-effect is created when a suppressor-click is presented close in time to a test-click. The analysis was carried out for short time-frames of short- and long-latency CEOAEs. The...... latter is defined as a CEOAE with duration greater than 20 ms, typically observed for test subjects with spontaneous otoacoustic emissions (SOAEs). Previous studies have tended to exclude these test subjects but they are incorporated here. The results from six exemplary subjects demonstrate that temporal...... temporal suppression and augmentation of CEOAEs. Recently, a feedback automatic gain control (AGC) system has been used to model CEOAE suppression. However, this system cannot account for augmentation and therefore another, dynamic nonlinear model was developed. Suppression and augmentation were modeled...

  2. Virasoro representations and fusion for general augmented minimal models

    Energy Technology Data Exchange (ETDEWEB)

    Eberle, Holger; Flohr, Michael [Physikalisches Institut der Universitaet Bonn, Nussallee 12, 53115 Bonn (Germany)

    2006-12-08

    In this paper, we present explicit results for the fusion of irreducible and higher rank representations in two logarithmically conformal models, the augmented c{sub 2,3} = 0 model as well as the augmented Yang-Lee model at c{sub 2,5} = -22/5. We analyse their spectrum of representations which is consistent with the symmetry and associativity of the fusion algebra. We also describe the first few higher rank representations in detail. In particular, we present the first examples of consistent rank 3 indecomposable representations and describe their embedding structure. Knowing these two generic models we also conjecture the general representation content and fusion rules for general augmented c{sub p,q} models.

  3. [Subantral augmentation with porous titanium in experiment and clinic].

    Science.gov (United States)

    Sirak, S V; Shchetinin, E V; Sletov, A A

    2016-01-01

    The article discusses the use of porous titanium for subantral augmentation. Experimental study was conducted on 12 yearling rams. Subantral augmentation using porous titanium was performed in 33 patients. In the control group consisting of 14 patients calcium phosphates and bone collagen based agents ("Bio-Оss" and "Collost") were used. In the main and control groups 46 and 32 implant were placed, respectively. Pilot histological and clinical studies proved that the granules of porous titanium are biocompatible with bone tissue, provide the optimal surface microrelief, thus creating good conditions for adhesion, expansion and migration of osteoforming cells, have negligible kinetics of resorption, are porous to ensure effective neovascularization of de novo formed bone tissue. Porous titanium is an effective alternative material for subantral bone augmentation for dental implantation and reconstructive operations on the maxillary sinus.

  4. Bibliography on augmentation of convective heat and mass transfer

    Energy Technology Data Exchange (ETDEWEB)

    Bergles, A.E.; Webb, R.L.; Junkhan, G.H.; Jensen, M.K.

    1979-05-01

    Heat transfer augmentation has developed into a major specialty area in heat transfer research and development. A bibliography of world literature on augmentation is presented. The literature is classified into passive augmentation techniques, which require no external power, and active techniques, which do require external power. The fourteen techniques are grouped in terms of their application to the various modes of heat transfer. Mass transfer is included for completeness. Key words are included with each citation for technique/mode identification. The total number of publications cited is 1,967, including 75 surveys of various techniques and 42 papers on performance evaluation of passive techniques. Patents are not included as they will be the subject of a future topical report.

  5. "Messing with the Mind: Evolutionary Challenges to Human Brain Augmentation

    Directory of Open Access Journals (Sweden)

    ARTHUR eSANIOTIS

    2014-09-01

    Full Text Available The issue of brain augmentation has received considerable scientific attention over the last two decades. A key factor to brain augmentation that has been widely overlooked are the complex evolutionary processes which have taken place in evolving the human brain to its current state of functioning. Like other bodily organs, the human brain has been subject to the forces of biological adaptation. The structure and function of the brain, is very complex and only now we are beginning to understand some of the basic concepts of cognition. Therefore, this article proposes that brain-machine interfacing and nootropics are not going to produce augmented brains because we do not understand enough about how evolutionary pressures have informed the neural networks which support human cognitive faculties.

  6. Bibliography on augmentation of convective heat and mass transfer

    International Nuclear Information System (INIS)

    Heat transfer augmentation has developed into a major specialty area in heat transfer research and development. A bibliography of world literature on augmentation is presented. The literature is classified into passive augmentation techniques, which require no external power, and active techniques, which do require external power. The fourteen techniques are grouped in terms of their application to the various modes of heat transfer. Mass transfer is included for completeness. Key words are included with each citation for technique/mode identification. The total number of publications cited is 1,967, including 75 surveys of various techniques and 42 papers on performance evaluation of passive techniques. Patents are not included as they will be the subject of a future topical report

  7. [Subantral augmentation with porous titanium in experiment and clinic].

    Science.gov (United States)

    Sirak, S V; Shchetinin, E V; Sletov, A A

    2016-01-01

    The article discusses the use of porous titanium for subantral augmentation. Experimental study was conducted on 12 yearling rams. Subantral augmentation using porous titanium was performed in 33 patients. In the control group consisting of 14 patients calcium phosphates and bone collagen based agents ("Bio-Оss" and "Collost") were used. In the main and control groups 46 and 32 implant were placed, respectively. Pilot histological and clinical studies proved that the granules of porous titanium are biocompatible with bone tissue, provide the optimal surface microrelief, thus creating good conditions for adhesion, expansion and migration of osteoforming cells, have negligible kinetics of resorption, are porous to ensure effective neovascularization of de novo formed bone tissue. Porous titanium is an effective alternative material for subantral bone augmentation for dental implantation and reconstructive operations on the maxillary sinus. PMID:26925568

  8. Unpower aerocraft augmented state feedback tracking guaranteed cost control

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Aimed at designing the unpower aerocraft attitude control system in a simple and practical way,the guaranteed cost control is adopted.To eliminate the steady-error,a novel tracking control approach-augmented state feedback tracking guaranteed cost control is proposed.Firstly,the unpower aerocraft is modeled as a linear system with norm bounded parameter uncertain,then the linear matrix inequality based state feedback gnaranteed cost control law is combined with the augmented state feedback tracking control from a new point of view.The sufficient condition of the existence of the augmented state feedback tracking guaranteed cost control is derived and converted to the feasible problem of the linear matrix inequality.Finally,the proposed approach is applied to a specified unpower aerocraft.The six dimensions of freedom simulation results show that the proposed approach is effective and feasible.

  9. Fault Diagnosis of Nonlinear Systems Using Structured Augmented State Models

    Institute of Scientific and Technical Information of China (English)

    Jochen Aβfalg; Frank Allg(o)wer

    2007-01-01

    This paper presents an internal model approach for modeling and diagnostic functionality design for nonlinear systems operating subject to single- and multiple-faults. We therefore provide the framework of structured augmented state models. Fault characteristics are considered to be generated by dynamical exosystems that are switched via equality constraints to overcome the augmented state observability limiting the number of diagnosable faults. Based on the proposed model, the fault diagnosis problem is specified as an optimal hybrid augmented state estimation problem. Sub-optimal solutions are motivated and exemplified for the fault diagnosis of the well-known three-tank benchmark. As the considered class of fault diagnosis problems is large, the suggested approach is not only of theoretical interest but also of high practical relevance.

  10. AUGMENTED REALITY BROWSERS: A PROPOSAL FOR ARCHITECTURAL STANDARDIZATION

    Directory of Open Access Journals (Sweden)

    Fernando Sambinelli

    2015-01-01

    Full Text Available The technology evolution of smartphones, systems and the growing of telecommunications, allow the use of Augmented Reality in the exploration of geo-referenced information, complementing the real environment of the users with various types of content displayed on robust mobile cameras through applications called augmented reality browsers. Although this type of application is being in development and growing use by society, the technology, and especially its software architecture do not have any kind of standardization. This work presents concepts about augmented reality browsers for mobile devices. It shows the main aspects and applications of those types of reality. Besides that, the specific features of those types of architecture are discussed and compared, and new architecture, whose most relevant feature is the interoperability of applications in various platforms for mobile devices, are presented. This work has the objective to develop an architectural framework for the development of these browsers.

  11. Integration Of Sensor Orientation Data Into An Augmented Reality Technology

    Directory of Open Access Journals (Sweden)

    Edgaras Artemčiukas

    2014-05-01

    Full Text Available Currently, such microelectromechanical sensors as accelerome­ters, gyroscopes and magnetometers are the dominant sensors in mobile devices. The market of mobile devices is constantly expanding and focused on sensor integration process by adding supplementary functionality for the applications; therefore, it is possible to adapt these sensors for augmented reality technology solutions. Many augmented reality solutions are based on computer vision processing methods in order to identify and track markers or other objects. However, the main problem is chaotic environment, lighting conditions where object recognition and tracking in real-time becomes difficult and sometimes is an impossible process. This paper analyses possibilities to apply microelectromechanical sensors. Additionally, it investigates quaternion use for sensor data to estimate reliable and accurate camera orientation and represent virtual content in augmented reality technology.

  12. Experimental study of 199Hg spin anti-relaxation coatings

    CERN Document Server

    Chowdhuri, Z; Horras, M; Kirch, K; Krempel, J; Lauss, B; Mtchedlishvili, A; Rebreyend, D; Roccia, S; Schmidt-Wellenburg, P; Zsigmond, G

    2013-01-01

    We report on a comparison of spin relaxation rates in a $^{199}$Hg magnetometer using different wall coatings. A compact mercury magnetometer was built for this purpose. Glass cells coated with fluorinated materials show longer spin coherence times than if coated with their hydrogenated homologues. The longest spin relaxation time of the mercury vapor was measured with a fluorinated paraffin wall coating.

  13. MRI contrast from relaxation along a fictitious field (RAFF).

    Science.gov (United States)

    Liimatainen, Timo; Sorce, Dennis J; O'Connell, Robert; Garwood, Michael; Michaeli, Shalom

    2010-10-01

    A new method to measure rotating frame relaxation and to create contrast for MRI is introduced. The technique exploits relaxation along a fictitious field (RAFF) generated by amplitude- and frequency-modulated irradiation in a subadiabatic condition. Here, RAFF is demonstrated using a radiofrequency pulse based on sine and cosine amplitude and frequency modulations of equal amplitudes, which gives rise to a stationary fictitious magnetic field in a doubly rotating frame. According to dipolar relaxation theory, the RAFF relaxation time constant (T(RAFF)) was found to differ from laboratory frame relaxation times (T(1) and T(2)) and rotating frame relaxation times (T(1ρ) and T(2ρ)). This prediction was supported by experimental results obtained from human brain in vivo and three different solutions. Results from relaxation mapping in human brain demonstrated the ability to create MRI contrast based on RAFF. The value of T(RAFF) was found to be insensitive to the initial orientation of the magnetization vector. In the RAFF method, the useful bandwidth did not decrease as the train length increased. Finally, as compared with an adiabatic pulse train of equal duration, RAFF required less radiofrequency power and therefore can be more readily used for rotating frame relaxation studies in humans. PMID:20740665

  14. Stress relaxation of bi-disperse polystyrene melts

    DEFF Research Database (Denmark)

    Hengeller, Ludovica; Huang, Qian; Dorokhin, Andriy;

    2016-01-01

    We present start-up of uniaxial extension followed by stress relaxation experiments of a bi-disperse 50 % by weight blend of 95k and 545k molecular weight polystyrene. We also show, for comparison, stress relaxation measurements of the polystyrene melts with molecular weight 95k and 545k, which...

  15. Relaxation Theory for Rural Youth. Research Bulletin No. 46.

    Science.gov (United States)

    Matthews, Doris B.

    This document synthesizes research findings to formulate a theory to guide relaxation training in educational settings, particularly rural schools. Young people experience many intense life events that require coping skills or relaxation. Family-related stress factors include instability in the home, lack of a support system, conflicting values,…

  16. An experiment in multispectral, multitemporal crop classification using relaxation techniques

    Science.gov (United States)

    Davis, L. S.; Wang, C.-Y.; Xie, H.-C

    1983-01-01

    The paper describes the result of an experimental study concerning the use of probabilistic relaxation for improving pixel classification rates. Two LACIE sites were used in the study and in both cases, relaxation resulted in a marked improvement in classification rates.

  17. Long-Term Psychosomatic Effects of Biofeedback vs. Relaxation Training.

    Science.gov (United States)

    Nowlis, David P.; Borzone, Ximena C.

    Differences were compared in the short-term and long-term responses of subjects with headache, insomnia, or hypertension to biofeedback training, relaxation, or a combination of both. Headache sufferers, insomniacs, and hypertensives were randomly assigned in equal numbers to biofeedback, relaxation training or a record-keeping control. Over 2…

  18. Rotational Brownian Motion on Sphere Surface and Rotational Relaxation

    Institute of Scientific and Technical Information of China (English)

    Ekrem Aydner

    2006-01-01

    The spatial components of the autocorrelation function of noninteracting dipoles are analytically obtained in terms of rotational Brownian motion on the surface of a unit sphere using multi-level jumping formalism based on Debye's rotational relaxation model, and the rotational relaxation functions are evaluated.

  19. Reduced-Complexity Semidefinite Relaxations of Optimal Power Flow Problems

    DEFF Research Database (Denmark)

    Andersen, Martin Skovgaard; Hansson, Anders; Vandenberghe, Lieven

    2014-01-01

    We propose a new method for generating semidefinite relaxations of optimal power flow problems. The method is based on chordal conversion techniques: by dropping some equality constraints in the conversion, we obtain semidefinite relaxations that are computationally cheaper, but potentially weake...

  20. A curved line search algorithm for atomic structure relaxation

    OpenAIRE

    Chen, Zhanghui; Wang, Linwang; Li, Jingbo; Li, Shushen

    2015-01-01

    Ab initio atomic relaxations often take large numbers of steps and long times to converge. An atomic relaxation method based on on-the-flight force learning and a corresponding new curved line minimization algorithm is presented to dramatically accelerate this process. Results for metal clusters demonstrate the significant speedup of this method compared with conventional conjugate-gradient method.