WorldWideScience

Sample records for attenuated total reflection

  1. Homogeneous Magnetic Field Source For Attenuated Total Reflection

    Directory of Open Access Journals (Sweden)

    Lesňák Michal

    2014-07-01

    Full Text Available The paper is focused on the study of two-dimensional magnetic field distribution used for an analysis of samples containing magnetically active films by means of the Attenuated Total Reflection (ATR method. The design of a proposed electromagnet and the magnetic field model computation are presented together with the results obtained from magnetic field distribution measurement. The ATR method can provide information about a thin film thickness, refractive index, and attenuation in addition to the perfunctory coupling of an optical wave into and off a waveguide [1, 2]. The prism coupling conditions are determined for magnetic structures with induced anisotropy.

  2. Relationship between normalized light intensity and attenuated total reflection ratio

    Institute of Scientific and Technical Information of China (English)

    Yingcai Wu; Zhengtian Gu

    2008-01-01

    Attenuated total reflection (ATR) ratio is usually utilized to study the properties of surface plasmon resonance (SPR) sensors. The relationship between normalized light intensity and ATR ratio is investigated, and a modification coefficient is put forward to describe the relationship. A mathematical expression is built up for the coefficient based on Fresnel principle. The result shows that the ATR ratio, which cannot be measured directly in experiments, can be determined with the coefficient and the normalized intensity of light. The characteristic of the coefficient is also discussed.

  3. Infrared analysis of thin layers by attenuated total reflection spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Rochat, N.; Chabli, A.; Bertin, F.; Vergnaud, C.; Mur, P.; Petitdidier, S.; Besson, P

    2003-09-15

    Interests in infrared spectroscopy (IRS) have been stimulated by the increasing need for non-destructive surface characterization providing structural and chemical informations about the new materials used in microelectronic devices. Standard infrared spectroscopy of thin layers is limited because of its lack of sensitivity. The use of optical configurations such as the attenuated total reflection (ATR) allows to characterize nanometric layers. This paper will present the results of a study conducted for a better understanding of the capabilities and limitations of this technique. A theoretical analysis based on a perturbation method is used to elucidate the results of ATR measurements performed on silicon oxide layers of different thickness on silicon substrates. This analysis shows that the absorbance ATR spectrum in p polarization is the image of the layer energy loss function, under specific conditions. The exact ATR spectrum simulation using a matrix formalism showed that the straightforward interpretation in terms of the layer dielectric function is limited to a very narrow layer thickness range. The fitting process of the ATR spectrum is evaluated for the interpretation of experimental spectra obtained for the growth of chemical silicon oxide layers.

  4. Monitoring the catalytic synthesis of glycerol carbonate by real-time attenuated total reflection FTIR spectroscopy

    NARCIS (Netherlands)

    Calvino-Casilda, V.; Mul, G.; Fernandez, J.F.; Rubio-Marcos, F.; Banares, M.A.

    2011-01-01

    In situ Attenuated Total Reflectance FTIR spectroscopy was used to study the carbonylation of glycerol with urea. Cobalt oxide nanoparticles, Co3O4, hierarchically dispersed on zinc oxide microparticles, ZnO, were used as catalysts. The present work demonstrates that in situ real-time attenuated tot

  5. Characterization of commercial carrageenans by Fourier transform infrared spectroscopy using single-reflection attenuated total reflection.

    Science.gov (United States)

    Volery, Pascal; Besson, Richard; Schaffer-Lequart, Christelle

    2004-12-15

    The purity and composition of commercial carrageenans vary widely and, therefore, have to be checked prior to their use in the food industry. Infrared spectroscopy is an alternative method to the expensive and time-consuming wet chemical and NMR methods to characterize carrageenan samples. The use of an attenuated total reflection accessory coupled to a Fourier transform infrared spectrophotometer allows a direct analysis of the sample without any preparation step, which is an additional benefit for the rapid identification check of raw material at reception in an industrial environment. Using a set of calibration samples, three multivariate calibrations were developed to predict the total carrageenan content as well as the molar ratio of kappa- and iota-carrageenans. A validation with an independent set of samples confirmed the robustness of the calibrations and the accuracy of the predictions. The accuracies of the calibrations given by their respective standard errors of prediction are 5.6 g/100 g, and 6.1 mol %, and 6.6 mol %, respectively, for the total carrageenan content and the molar ratios of kappa- and iota-carrageenans. The total preparation and analysis time is <5 min per sample.

  6. Detection of explosives traces on documents by attenuated total reflection method

    Science.gov (United States)

    Boreysho, A. S.; Bertseva, E. V.; Korepanov, V. S.; Morosov, A. V.; Savin, A. V.; Strakhov, S. Y.

    2007-06-01

    The technical devices of explosives trace detection are discussed in this work. The attenuated total reflection method (ATR) is considered for detection of explosives traces on different things (documents, clothes, fingers). The results of experiments with Fourier spectrometer and ATR attachment for explosive trace detection are presented. The optical scheme and design of the compact testing device are discussed. The device includes the document information scanner and at the same time - the trace detector of explosives on the document cover.

  7. Attenuated total reflectance spectroscopy of simultaneous processes: Corrosion inhibition of cuprous oxide by benzotriazole

    Science.gov (United States)

    Bratescu, Maria Antoaneta; Allred, Daniel B.; Saito, Nagahiro; Sarikaya, Mehmet; Takai, Osamu

    2008-03-01

    Attenuated total reflectance (ATR) spectroscopy was used to perform in situ studies of the corrosion inhibition of cuprous oxide (Cu 2O) by benzotriazole (BTA) in aqueous solution at concentrations from 1 to 20 μM. Because two separate processes occur simultaneously, that of Cu 2O corrosion and corrosion inhibition by BTA adsorption, the spectral information was subjected to deconvolution by a conjugate gradient minimization algorithm. Under these conditions, a solution phase concentration of 7-10 μM BTA nearly completely inhibited the corrosion of Cu 2O in deionized water. Using a Langmuir adsorption model, this represented only 25% of the maximally covered surface area.

  8. Anisotropy in Thermo-Optic Coefficient of Different Polymer Systems by Attenuated Total Reflection Configuration

    Institute of Scientific and Technical Information of China (English)

    LI Xiang; CAO Zhuang-Qi; SHEN Qi-Shun; MENG Qing-Hua; HUANG De-Ying; GUO Kun-Peng; QIU Ling; SHEN Yu-Quan

    2006-01-01

    @@ Thermo-optic coefficient dn/dT as well as volume expansion coefficients β of different polymer systems are measured for both TE and TM polarizations in an attenuated total reflection (ATR) configuration. Experimental results indicate that cross-linked polymer systems exhibit the thermal expansion coefficients smaller than those of the original side-chain systems. Moreover, the anisotropies in thermo-optic coefficients of the polymer systems with small birefringence exhibit linear relationship with the anisotropies in volume expansion coefficients, but the polymer systems with larger birefringence exhibit more complicated relationship.

  9. [Rapid quantitative analysis of hydrocarbon composition of furfural extract oils using attenuated total reflection infrared spectroscopy].

    Science.gov (United States)

    Li, Na; Yuan, Hong-Fu; Hu, Ai-Qin; Liu, Wei; Song, Chun-Feng; Li, Xiao-Yu; Song, Yi-Chang; He, Qi-Jun; Liu, Sha; Xu, Xiao-Xuan

    2014-07-01

    A set of rapid analysis system for hydrocarbon composition of heavy oils was designed using attenuated total reflection FTIR spectrometer and chemometrics to determine the hydrocarbon composition of furfural extract oils. Sixty two extract oil samples were collected and their saturates and aromatics content data were determined according to the standard NB/SH/T0509-2010, then the total contents of resins plus asphaltenes were calculated by the subtraction method in the percentage of weight. Based on the partial least squares (PLS), calibration models for saturates, aromatics, and resin+asphaltene contents were established using attenuated total reflection FTIR spectroscopy, with their SEC, 1.43%, 0.91% and 1.61%, SEP, 1.56%, 1.24% and 1.81%, respectively, meeting the accuracy and repeatability required for the standard. Compared to the present standard method, the efficiency of hydrocarbon composition analysis for furfural extract oils is significantly improved by the new method which is rapid and simple. The system could also be used for other heavy oil analysis, with excellent extension and application foreground.

  10. Infrared attenuated total reflection spectroscopy for the characterization of gold nanoparticles in solution.

    Science.gov (United States)

    López-Lorente, Ángela Inmaculada; Sieger, Markus; Valcárcel, Miguel; Mizaikoff, Boris

    2014-01-07

    In situ synthesis of bare gold nanoparticles mediated by stainless steel as reducing agent was monitored via infrared attenuated total reflection (IR-ATR) spectroscopy. Gold nanoparticles were directly synthesized within the liquid cell of the ATR unit taking immediate advantage of the stainless steel walls of the ATR cell. As nanoparticles were formed, a layer of particles was deposited at the SiO2 ATR waveguide surface. Incidentally, the absorption bands of water increased resulting from surface-enhanced infrared absorption (SEIRA) effects arising from the presence of the gold nanoparticles within the evanescent field. Next to the influence of the Au(III) precursor concentration and the temperature, the suitability of IR-ATR spectroscopy as an innovative tool for investigating changes of nanoparticles in solution, including their aggregation promoted by an increase of the ionic strength or via a pH decrease, and for detailing the sedimentation process of gold nanoparticles was confirmed.

  11. In situ probing of surface hydrides on hydrogenated amorphous silicon using attenuated total reflection infrared spectroscopy

    CERN Document Server

    Kessels, W M M; Sanden, M C M; Aydil, E S

    2002-01-01

    An in situ method based on attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) is presented for detecting surface silicon hydrides on plasma deposited hydrogenated amorphous silicon (a-Si:H) films and for determining their surface concentrations. Surface silicon hydrides are desorbed by exposing the a-Si:H films to low energy ions from a low density Ar plasma and by comparing the infrared spectrum before and after this low energy ion bombardment, the absorptions by surface hydrides can sensitively be separated from absorptions by bulk hydrides incorporated into the film. An experimental comparison with other methods that utilize isotope exchange of the surface hydrogen with deuterium showed good agreement and the advantages and disadvantages of the different methods are discussed. Furthermore, the determination of the composition of the surface hydrogen bondings on the basis of the literature data on hydrogenated crystalline silicon surfaces is presented, and quantification of the h...

  12. Attenuated total reflection Fourier-transform infrared (ATR-FTIR) imaging of tissues and live cells.

    Science.gov (United States)

    Andrew Chan, K L; Kazarian, Sergei G

    2016-04-07

    FTIR spectroscopic imaging is a label-free, non-destructive and chemically specific technique that can be utilised to study a wide range of biomedical applications such as imaging of biopsy tissues, fixed cells and live cells, including cancer cells. In particular, the use of FTIR imaging in attenuated total reflection (ATR) mode has attracted much attention because of the small, but well controlled, depth of penetration and corresponding path length of infrared light into the sample. This has enabled the study of samples containing large amounts of water, as well as achieving an increased spatial resolution provided by the high refractive index of the micro-ATR element. This review is focused on discussing the recent developments in FTIR spectroscopic imaging, particularly in ATR sampling mode, and its applications in the biomedical science field as well as discussing the future opportunities possible as the imaging technology continues to advance.

  13. Detection of whitening agents in illegal cosmetics using attenuated total reflectance-infrared spectroscopy.

    Science.gov (United States)

    Deconinck, E; Bothy, J L; Desmedt, B; Courselle, P; De Beer, J O

    2014-09-01

    Cosmetic products containing illegal whitening agents are still found on the European market. They represent a considerable risk to public health, since they are often characterised by severe side effects when used chronically. The detection of such products at customs is not always simple, due to misleading packaging and the existence of products containing only legal components. Therefore there is a need for easy to use equipment and techniques to perform an initial screening of samples. The use of attenuated total reflectance-infrared (ATR-IR) spectroscopy, combined with chemometrics, was evaluated for that purpose. It was found that the combination of ATR-IR with the simple chemometric technique k-nearest neighbours gave good results. A model was obtained in which a minimum of illegal samples was categorised as legal. The correctly classified illegal samples could be attributed to the illegal components present.

  14. Recent Developments in Solid-Phase Extraction for Near and Attenuated Total Reflection Infrared Spectroscopic Analysis

    Directory of Open Access Journals (Sweden)

    Christian W. Huck

    2016-05-01

    Full Text Available A review with more than 100 references on the principles and recent developments in the solid-phase extraction (SPE prior and for in situ near and attenuated total reflection (ATR infrared spectroscopic analysis is presented. New materials, chromatographic modalities, experimental setups and configurations are described. Their advantages for fast sample preparation for distinct classes of compounds containing different functional groups in order to enhance selectivity and sensitivity are discussed and compared. This is the first review highlighting both the fundamentals of SPE, near and ATR spectroscopy with a view to real sample applicability and routine analysis. Most of real sample analyses examples are found in environmental research, followed by food- and bioanalysis. In this contribution a comprehensive overview of the most potent SPE-NIR and SPE-ATR approaches is summarized and provided.

  15. Unidirectional excitation of graphene plasmon in attenuated total reflection (ATR) configuration

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Wei [Hubei University of Education, Wuhan (China). School of Physics and Mechanical and Electrical Engineering; Wu, Yue-Chao [Nanyang Technological University, Singapore (Singapore). Div. of Physics and Applied Physics; Liu, Fang-Li [Maryland Univ., College Park, MD (United States). Joint Quantum Institute

    2016-08-01

    Graphene plasmon has been attracting interests from both theoretical and experimental research due to its gate tunability and potential applications in the terahertz frequency range. Here, we propose an effective scheme to unidirectionally excite the graphene plasmon by exploiting magneto-optical materials in the famous attenuated total reflection (ATR) configuration. We show that the graphene plasmon dispersion relation in such a device is asymmetric in different exciting directions, thus making it possible to couple the incident light unidirectionally to the propagating plasmon. The split of absorption spectrum of graphene clearly indicates that under a magnetic field for one single frequency, graphene plasmon can only be excited in one direction. The possible gate tunablity of excitation direction and the further application of the proposed scheme, such as optical isolator, also are discussed.

  16. Discrimination of nylon polymers using attenuated total reflection mid-infrared spectra and multivariate statistical techniques.

    Science.gov (United States)

    Enlow, Elizabeth M; Kennedy, Jennifer L; Nieuwland, Alexander A; Hendrix, James E; Morgan, Stephen L

    2005-08-01

    Nylons are an important class of synthetic polymers, from an industrial, as well as forensic, perspective. A spectroscopic method, such as Fourier transform infrared (FT-IR) spectroscopy, is necessary to determine the nylon subclasses (e. g., nylon 6 or nylon 6,6). Library searching using absolute difference and absolute derivative difference algorithms gives inconsistent results for identifying nylon subclasses. The objective of this study was to evaluate the usefulness of peak ratio analysis and multivariate statistics for the identification of nylon subclasses using attenuated total reflection (ATR) spectral data. Many nylon subclasses could not be distinguished by the peak ratio of the N-H vibrational stretch to the sp(3) C-H(2) vibrational stretch intensities. Linear discriminant analysis, however, provided a graphical visualization of differences between nylon subclasses and was able to correctly classify a set of 270 spectra from eight different subclasses with 98.5% cross-validated accuracy.

  17. Characterization of Printing Inks Using DART-Q-TOF-MS and Attenuated Total Reflectance (ATR) FTIR.

    Science.gov (United States)

    Williamson, Rhett; Raeva, Anna; Almirall, Jose R

    2016-05-01

    The rise in improved and widely accessible printing technology has resulted in an interest to develop rapid and minimally destructive chemical analytical techniques that can characterize printing inks for forensic document analysis. Chemical characterization of printing inks allows for both discrimination of inks originating from different sources and the association of inks originating from the same source. Direct analysis in real-time mass spectrometry (DART-MS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) were used in tandem to analyze four different classes of printing inks: inkjets, toners, offset, and intaglio. A total of 319 samples or ~ 80 samples from each class were analyzed directly on a paper substrate using the two methods. DART-MS was found to characterize the semi-volatile polymeric vehicle components, while ATR-FTIR provided chemical information associated with the bulk components of these inks. Complimentary data results in improved discrimination when both techniques are used in succession resulting in >96% discrimination for all toners, 95% for all inkjets, >92% for all offset, and >54% for all intaglio inks.

  18. Forensic Hair Differentiation Using Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy.

    Science.gov (United States)

    Manheim, Jeremy; Doty, Kyle C; McLaughlin, Gregory; Lednev, Igor K

    2016-07-01

    Hair and fibers are common forms of trace evidence found at crime scenes. The current methodology of microscopic examination of potential hair evidence is absent of statistical measures of performance, and examiner results for identification can be subjective. Here, attenuated total reflection (ATR) Fourier transform-infrared (FT-IR) spectroscopy was used to analyze synthetic fibers and natural hairs of human, cat, and dog origin. Chemometric analysis was used to differentiate hair spectra from the three different species, and to predict unknown hairs to their proper species class, with a high degree of certainty. A species-specific partial least squares discriminant analysis (PLSDA) model was constructed to discriminate human hair from cat and dog hairs. This model was successful in distinguishing between the three classes and, more importantly, all human samples were correctly predicted as human. An external validation resulted in zero false positive and false negative assignments for the human class. From a forensic perspective, this technique would be complementary to microscopic hair examination, and in no way replace it. As such, this methodology is able to provide a statistical measure of confidence to the identification of a sample of human, cat, and dog hair, which was called for in the 2009 National Academy of Sciences report. More importantly, this approach is non-destructive, rapid, can provide reliable results, and requires no sample preparation, making it of ample importance to the field of forensic science.

  19. Evaluation of drug crystallinity in aqueous suspension using terahertz time-domain attenuated total reflection spectroscopy.

    Science.gov (United States)

    Takebe, Gen; Kawada, Yoichi; Akiyama, Koichiro; Takahashi, Hironori; Takamoto, Hisayoshi; Hiramatsu, Mitsuo

    2013-11-01

    Terahertz pulsed spectroscopy has recently been demonstrated to be a novel technique for the investigation of the solid-state properties of pharmaceutical materials. In this study, we directly measured the crystallinity of a drug suspended in water, using a terahertz pulsed attenuated total reflection (ATR) method. The dihydropyridine calcium channel blocker nifedipine is classified as a poorly soluble drug; its most stable crystalline form is known as form I. Transmission spectra, collected from 0.2 to 2.0 THz (6.6 to 66 cm(-1) ), of nifedipine crystals had a strong absorption peak at 1.2 THz (40 cm(-1) ) at room temperature. When the nifedipine crystals were mixed with poloxamer 188 and suspended in water, the resulting spectra measured using the ATR method had a peak at the same frequency as in the spectra obtained in transmission mode. Furthermore, the peak area was proportional to the amount of crystals. The upward sloping baseline in the spectra, corresponding to water absorption, decreased stepwise with increasing amounts of crystalline particles. We confirmed that the spectra gave excellent quantitative results, using partial least-squares regression analysis. The results suggest the possibility of using this method for qualitative and quantitative assessments of crystalline drugs in suspension.

  20. [Attenuated Total Reflection Infrared Spectroscopy for Degradation Profile of High Density Polyethylene after Weathering Aging].

    Science.gov (United States)

    Guo, Jun-jun; Yan, Hua; Bao, He-bin; Wang, Xue-mei; Hu, Zhi-de; Yang, Jian-jian

    2015-06-01

    High density polyethylene (HDPE) was widely used as rotational packaging case in the material reserve field. The chemical changes of HDPE, exposed to particular climatic conditions of tropic marine atmosphere for one year-long in Wanning Hainan, were elucidated by the attenuated total reflection infrared spectroscopy (ATR-FTIR). The structural changes were studied qualitatively, mainly from the polymeric chain breaking, branching and oxidation to distinguish the degradation profile. The variations of crystallinity & carbonyl index were also studied quantitatively according to the characteristic peaks intensity & area ratio. Finally, the relationships between structural changes and mechanical properties were investigated. The results showed that the polymeric chain breaking & branching play a leading role before 3 months in the aging progress. Then oxidation phenomena gradually takes place during 3-6 months. The chain branching & oxidation were predominant factors after 6 months. Nine months later, the oxidation was saturated gradually. Furthermore, the aging process is positively correlated to the temperature and irradiation. After 12 months aging, the carbonyl index increased by 112 times and crystallinity was 10% higher than before. The tensile/bending modulus deceased faster than tensile/bending strength of HDPE. The linear degree of tensile modulus and carbonyl index was 0.97. The degree of linearity of tensile strength and crystallinity calculated by feature bands (720-730 cm(-1)) was 0.96. It showed that the mechanical properties of HDPE can be speculated from the structural changes by ATR-FTIR.

  1. Metallic attenuated total reflection infrared hollow fibers for robust optical transmission systems

    Science.gov (United States)

    Jing, Chengbin; Guo, Hong; Hu, Zhigao; Yang, Pingxiong; Chu, Junhao; Liu, Aiyun; Shi, Yiwei

    2014-07-01

    A durable metallic attenuated total reflection (ATR) hollow fiber (bore size: 1.45 mm, wall thickness: 50 μm) was designed and fabricated based on a nickel capillary tube and hexagonal germanium dioxide (GeO2). The anomalous dispersion of the hexagonal GeO2 layer grown inside a nickel tube achieves low-loss light transmission at two peak-power wavelengths for CO2 laser devices (10.2 and 10.6 μm). An 11-28 W, 10.2 or 10.6 μm CO2 laser power was steadily delivered via a fiber elastically bent from 0° to 90° (radius: 45 cm) for over 40 min (transmission loss: 0.22 to 4.2 dB/m). Theoretically fitting the measured temperatures showed that front-end clipping caused greater thermal loading than the distributed mode absorption. The maximum external temperature of a nickel ATR fiber is much lower than that of a silica glass ATR fiber owing to their different heat dissipation abilities. The HE11 mode purity of the output beam profiles decreased from 90.3% to 44.7% as the bending angle increased from 0° to 90°. Large core sizes and wall roughnesses (scattering loss 0.04 dB/m) contributed to mode mixing and excess losses that were above the value predicted by the classical Marcatili and Schmeltzer equation (0.024-0.037 dB/m).

  2. Identification of species' blood by attenuated total reflection (ATR) Fourier transform infrared (FT-IR) spectroscopy.

    Science.gov (United States)

    Mistek, Ewelina; Lednev, Igor K

    2015-09-01

    Blood is one of the most common and informative forms of biological evidence found at a crime scene. A very crucial step in forensic investigations is identifying a blood stain's origin. The standard methods currently employed for analyzing blood are destructive to the sample and time-consuming. In this study, attenuated total reflection (ATR) Fourier transform infrared (FT-IR) spectroscopy is used as a confirmatory, nondestructive, and rapid method for distinction between human and animal (nonhuman) blood. Partial least squares-discriminant analysis (PLS-DA) models were built and demonstrated complete separation between human and animal donors, as well as distinction between three separate species: human, cat, and dog. Classification predictions of unknown blood donors were performed by the model, resulting in 100 % accuracy. This study demonstrates ATR FT-IR spectroscopy's great potential for blood stain analysis and species discrimination, both in the lab and at a crime scene since portable ATR FT-IR instrumentation is commercially available.

  3. Attenuated total reflectance fourier transform infrared analysis of fly ash geopolymer gel aging.

    Science.gov (United States)

    Rees, Catherine A; Provis, John L; Lukey, Grant C; van Deventer, Jannie S J

    2007-07-17

    Structural changes in fly ash geopolymers activated with different sodium hydroxide and silicate concentrations are investigated using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy over a period of 200 days. A strong correlation is found between the concentration of silicate monomer in the activating solution and the position of the main Si-O-T stretching band in the FTIR spectrum, which gives an indication of the relative changes in the gel Si/Al ratio. The FTIR spectra of geopolymer samples with activating solution concentrations of up to 1.2 M SiO2 indicate that an Al-rich gel forms before the final gel composition is reached. The time required for the system to reach a steady gel composition depends on the silicate activating solution concentration and speciation. Geopolymers activated with solutions containing predominantly high-order silicate species rapidly reach a steady gel composition without first forming an Al-rich gel. A minimum silicate monomer concentration of approximately 0.6 M is required to shift the geopolymer synthesis mechanism from hydroxide activation to silicate activation. Silicate speciation in the activating solutions also affects zeolite formation and geopolymer microstructures, with a more homogeneous microstructure and less zeolite formation observed at a higher SiO2 content.

  4. Total attenuated reflection infrared analysis of silicon-stabilized tri-calcium phosphate.

    Science.gov (United States)

    Dunfield, D; Sayer, M; Shurvell, H F

    2005-10-27

    Bioceramics based on silicon stabilized tricalcium phosphate [Si-TCP] have been investigated by attenuated total reflection infrared spectroscopy using an experimental preparation that ensures consistent high-quality spectral data. Phase normalized measurements show that changes in OH bands are primarily due to a decrease in the hydroxyapatite content; however, a band at 945 cm(-1) associated with dehydration of the apatite is visible and correlated with silicon doping. Changes in absorption bands with Si content associated with PO(4)(3-) differ for SiO(2) doping levels less than and greater than 0.2 mol of SiO(2)/mol of HA as the amount of Si-TCP phase saturates. Increased resolution allows the study of weak bands linked to Si at 668, 800, 863, and 892 cm(-1) and suggests that the loss of PO(4)(3-) coincides with the development of different silicate groups-SiO(4) at lower doping levels and a new silicon species at higher doping.

  5. Attenuated total reflectance Fourier transform infrared spectroscopy method to differentiate between normal and cancerous breast cells.

    Science.gov (United States)

    Lane, Randy; See, Seong S

    2012-09-01

    Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) is used to find the structural differences between cancerous breast cells (MCF-7 line) and normal breast cells (MCF-12F line). Gold nanoparticles were prepared and the hydrodynamic diameter of the gold nanoparticles found to be 38.45 nm. The Gold nanoparticles were exposed to both MCF-7 and MCF-12F cells from lower to higher concentrations. Spectroscopic studies founds nanoparticles were within the cells, and increasing the nanoparticles concentration inside the cells also resulted in sharper IR peaks as a result of localized surface Plasmon resonance. Asymmetric and symmetric stretching and bending vibrations between phosphate, COO-, CH2 groups were found to give negative shifts in wavenumbers and a decrease in peak intensities when going from noncancerous to cancerous cells. Cellular proteins produced peak assignments at the 1542 and 1644 cm(-1) wavenumbers which were attributed to the amide I and amide II bands of the polypeptide bond of proteins. Significant changes were found in the peak intensities between the cell lines in the spectrum range from 2854-2956 cm(-1). Results show that the concentration range of gold nanoparticles used in this research showed no significant changes in cell viability in either cell line. Therefore, we believe ATR-FTIR and gold nanotechnology can be at the forefront of cancer diagnosis for some time to come.

  6. Compositional features of cotton plant biomass fractions characterized by attenuated total reflection Fourier transform infrared spectroscopy

    Science.gov (United States)

    Cotton is one of the most important and widely grown crops in the world. In addition to natural textile fiber production as a primary purpose, it yields a high grade vegetable oil for human consumption and also carbohydrate fiber and protein byproducts for animal feed. In this work, attenuated total...

  7. Secondary cell wall development in cotton fibers as examined with attenuated total reflection Fourier transform infrared spectroscopy

    Science.gov (United States)

    Cotton fibers harvested at 18, 20, 24, 28, 32, 36 and 40 days after flowering were examined using attenuated total reflection Fourier transform-infrared (ATR FT-IR) spectroscopy. The selected harvesting points coincide with secondary cell wall (SCW) development in the fibers. Progressive but moderat...

  8. Quantitative determination of prednisone in tablets by infrared attenuated total reflection and Raman spectroscopy.

    Science.gov (United States)

    Mazurek, Sylwester; Szostak, Roman

    2012-01-01

    The quantification of prednisone in tablets was performed using partial least squares (PLS) models based on FTIR-attenuated total reflection (ATR) and FT-Raman spectra. To compare the predictive ability of these models, the relative standard error of prediction (RSEP) values were calculated. In the case of prednisone determination from the FT-Raman data, RSEP values of 3.1 and 3.2% for the calibration and validation data sets were obtained. For FTIR-ATR models, which were constructed using five spectra for each sample, these errors amounted to 2.6 and 2.9%, respectively. Four commercial products containing 1, 5, 10, and 20 mg prednisone/tablet were quantified. Concentrations derived from the elaborated models correlated strongly with the results of reference analyses and with the declared values (in parentheses). The analyses gave recoveries of 100.0-101.6% (100.1-103.0%) and 98.1-103.2% (100.4-102.9%) for FTIR-ATR and FT-Raman data, respectively. A successful quantification of prednisolone in tablets containing 5 mg active ingredient/tablet was also performed using the PLS model, which was based on FTIR-ATR spectra, with a recovery of 99.8 (98.8%). Both reported spectroscopic techniques can be used as fast and convenient alternatives to the standard pharmacopeial methods of prednisone and prednisolone quantification in solid dosage forms. However, in the case of FTIR-ATR spectroscopy, it is necessary to repeat measurements several times to obtain sufficiently low quantification errors.

  9. Attenuated total reflection-Fourier transform infrared spectroscopic imaging of pharmaceuticals in microfluidic devices.

    Science.gov (United States)

    Ewing, Andrew V; Clarke, Graham S; Kazarian, Sergei G

    2016-03-01

    The poor aqueous solubility of many active pharmaceutical ingredients presents challenges for effective drug delivery. In this study, the combination of attenuated total reflection (ATR)-FTIR spectroscopic imaging with specifically designed polydimethylsiloxane microfluidic devices to study drug release from pharmaceutical formulations has been developed. First, the high-throughput analysis of the dissolution of micro-formulations studied under flowing conditions has been introduced using a model formulation of ibuprofen and polyethylene glycol. The behaviour and release of the drug was monitored in situ under different pH conditions. In contrast to the neutral solution, where both the drug and excipient dissolved at a similar rate, structural change from the molecularly dispersed to a crystalline form of ibuprofen was characterised in the obtained spectroscopic images and the corresponding ATR-FTIR spectra for the experiments carried out in the acidic medium. Further investigations into the behaviour of the drug after its release from formulations (i.e., dissolved drug) were also undertaken. Different solutions of sodium ibuprofen dissolved in a neutral medium were studied upon contact with acidic conditions. The phase transition from a dissolved species of sodium ibuprofen to the formation of solid crystalline ibuprofen was revealed in the microfluidic channels. This innovative approach could offer a promising platform for high-throughput analysis of a range of micro-formulations, which are of current interest due to the advent of 3D printed pharmaceutical and microparticulate delivery systems. Furthermore, the ability to study dissolved drug in solution under flowing conditions can be useful for the studies of the diffusion of drugs into tissues or live cells.

  10. STUDY OF INK LAYER BY METHOD OF ATTENUATED TOTAL REFLECTANCE SPECTROSCOPY

    Directory of Open Access Journals (Sweden)

    D. G. Fatkhullina

    2016-05-01

    Full Text Available Subject of Research. Researchresults of thickness distribution of an ink layer smearedon a glass surface are presented. The orange ink which is used as a coloring pigment in writing instrument (highlighter is selectedasan object of study. Method. Researches were carried out by the method of attenuated total reflectance(ATR spectroscopy. The spectral setup fitted up on the basis of monochromator MDR-204 was usedin the experiment. The peculiarity of the measurement scheme is the applicationofhigh-resolution camera as a radiation detector and information storage as an images package. Researches allowed receivingexperimental data in the form of ink ATR spectra arrayfor studied areas of layer surface in a given spectral range. Main Results. The estimation of ink layer thickness was done, that gives the possibilityto visualize its distribution over the surface using three-dimensional modeling capabilities. The thickness of the ink layer is not more than 0.12 microns and arithmetic mean of the thickness is0.06 microns. The local areas are observed in an ink distribution, they have a maximum layer thickness (0.07-0.12 microns or areas with the ink thickness less then 0.03 microns. Variation of the ink layer thicknessbetween the local areas is smooth. Practical Relevance. The proposed measuring scheme, the sequence of registration and processing of experimental data can be used to studyink distribution within the thickness of a surface layer of other materials,for example, in analysis of signs performed by an ink on paper medium in order to identify them in such areas of science as forensic science andstudy of art.

  11. Effects of Particle Size on the Attenuated Total Reflection Spectrum of Minerals.

    Science.gov (United States)

    Udvardi, Beatrix; Kovács, István J; Fancsik, Tamás; Kónya, Péter; Bátori, Miklósné; Stercel, Ferenc; Falus, György; Szalai, Zoltán

    2016-09-26

    This study focuses on particle size effect on monomineralic powders recorded using attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy. Six particle size fractions of quartz, feldspar, calcite, and dolomite were prepared (particle size. As particle size increases, the intensity and area of IR bands usually decrease while the width of bands increases. The band positions usually shifted to higher wavenumbers with decreasing particle size. Infrared spectra of minerals are the most intensive in the particle size fraction of 2-4 µm. However, if the particle size is very small (particle diameter and absorbance at a given wavenumber. It is concluded that when powder samples with substantially different particle size are compared, as in regression analysis for modal predictions using ATR FT-IR, it is also important to report the grain size distribution or surface area of samples. The band area of water (3000-3620 cm(-1)) is similar in each mineral fraction, except for the particles below 2 µm. It indicates that the finest particles could have disproportionately more water adsorbed on their larger surface area. Thus, these higher wavenumbers of the ATR FT-IR spectra may be more sensitive to this spectral interference if the number of particles below 2 µm is considerable. It is also concluded that at least a proportion of the moisture could be very adhesive to the particles due to the band shift towards lower wavenumbers in the IR range of 3000-3620 cm(-1).

  12. Tethered bilayer lipid membranes studied by simultaneous attenuated total reflectance infrared spectroscopy and electrochemical impedance spectroscopy

    Science.gov (United States)

    Erbe, Andreas; Bushby, Richard J.; Evans, Stephen D.; Jeuken, Lars J. C.

    2013-01-01

    The formation of tethered lipid bilayer membranes (tBLMs) from unilamelar vesicles of egg yolk phosphatidylcholine (EggPC) on mixed self–assembled monolayers (SAMs) from varying ratios of 6-mercaptohexanol and EO3Cholesteryl on gold has been monitored by simultaneous attenuated total reflectance fourier transform infrared (ATR–FTIR) spectroscopy and electrochemical impedance spectroscopy (EIS). The influence of the lipid orientation (and hence the anisotropy) of lipids on a gold film on the dichroic ratio was studied by simulations of spectra with a matrix method for anisotropic layers. It is shown that for certain tilt angles of the dielectric tensor of the adsorbed anisotropic layer dispersive and negative absorption bands are possible. The experimental data indicates that the structure of the assemblies obtained varies with varying SAM composition. On SAMs with a high content of EO3Cholesteryl, tBLMs with reduced fluidity are formed. For SAMs with high content of 6-mercaptohexanol, the results are consistent with the adsorption of flattened vesicles, while spherical vesicles have been found in a small range of surface compositions. The kinetics of the adsorption process is consistent with the assumption of spherical vesicles as long–living intermediates for surfaces of high 6-mercaptohexanol content. No long–living spherical vesicles have been detected for surfaces with large fraction of EO3Cholesteryl tethers. The observed differences between the surfaces suggest that for the formation of tBLMs (unlike supported BLMs) no critical surface coverage of vesicles is needed prior to lipid bilayer formation. PMID:17388505

  13. A modified golden gate attenuated total reflection (ATR) cell for monitoring phase transitions in multicomponent fluids at high temperatures.

    Science.gov (United States)

    Novitskiy, Alexander A; Ke, Jie; Comak, Gurbuz; Poliakoff, Martyn; George, Michael W

    2011-08-01

    A new continuous flow method using attenuated total reflection infrared (ATR-IR) spectroscopy has been developed for monitoring phase transitions in multicomponent fluids at high pressures and temperatures. Our approach uses Fourier transform infrared (FT-IR) and a modified Golden Gate attenuated total reflection (ATR) cell and exploits the fact that the absorbance of a vapor is much lower than that of the corresponding liquid to monitor the phase transition between vapor and liquid. We demonstrate that this method can provide quantitative measurements on both the dew point and the bubble point. We have validated our approach using three single-component systems (EtOH, MeOH, and H(2)O) and a binary system of EtOH + H(2)O, monitoring phase transitions at temperature up to 300 °C and pressure up to 10 MPa.

  14. Comparative study of Fourier transform infrared spectroscopy in transmission, attenuated total reflection, and total reflection modes for the analysis of plastics in the cultural heritage field.

    Science.gov (United States)

    Picollo, Marcello; Bartolozzi, Giovanni; Cucci, Costanza; Galeotti, Monica; Marchiafava, Veronica; Pizzo, Benedetto

    2014-01-01

    This study was completed within the framework of two research projects dealing with the conservation of contemporary artworks. The first is the Seventh Framework Project (FP7) of the European Union, Preservation of Plastic ARTefacts in Museum Collections (POPART), spanning years 2008-2012, and the second is the Italian project funded by the Tuscan Region, Preventive Conservation of Contemporary Art (Conservazione Preventiva dell'Arte Contemporanea (COPAC)), spanning 2011-2013. Both of these programs pointed out the great importance of having noninvasive and portable analytical techniques that can be used to investigate and characterize modern and contemporary artworks, especially those consisting of synthetic polymers. Indeed, despite the extensive presence of plastics in museum collections, there is still a lack of analytical tools for identifying, characterizing, and setting up adequate conservation strategies for these materials. In this work, the potentials of in situ and noninvasive Fourier transform infrared (FT-IR) spectroscopy, implemented by means of portable devices that operate in reflection mode, are investigated with a view to applying the results in large-scale surveys of plastic objects in museums. To this end, an essential prerequisite are the reliability of spectral data acquired in situ and the availability of spectral databases acquired from reference materials. A collection of polymeric samples, which are available commercially as ResinKit, was analyzed to create a reference spectral archive. All the spectra were recorded using three FT-IR configurations: transmission (trans), attenuated total reflection (ATR), and total reflection (TR). A comparative evaluation of the data acquired using the three instrumental configurations is presented, together with an evaluation of the similarity percentages and a discussion of the critical cases.

  15. A method to overcome the diffraction limit in infrared microscopy using standing waves in an attenuated total reflection configuration

    Science.gov (United States)

    Hendaoui, Nordine; Mani, Aladin; Liu, Ning; Tofail, Syed M.; Silien, Christophe; Peremans, André

    2017-01-01

    A method is proposed to overcome the diffraction limit of spatial resolution in infrared microscopy. To achieve this, standing waves in an attenuated total reflection configuration were generated to spatially modulate the absorbance of adsorbate vibrational transitions. A numerical simulation was undertaken. It showed that chemical imaging with a spatial resolution of approximately 100 nm is achievable in the case of self-assembled patterns (ofoctdecyltrichlorosilane [CH3-(CH2)17-SiCl3]), when probing the methyl modes located near 3.5 micrometres.

  16. Micro-Attenuated Total Reflection Fourier Transform Infrared (Micro ATR FT-IR) Spectroscopic Imaging with Variable Angles of Incidence.

    Science.gov (United States)

    Wrobel, Tomasz P; Vichi, Alessandra; Baranska, Malgorzata; Kazarian, Sergei G

    2015-10-01

    The control of the angle of incidence in attenuated total reflection (ATR) Fourier transform infrared (FT-IR) spectroscopy allows for the probing of the sample at different depths of penetration of the evanescent wave. This approach has been recently coupled with macro-imaging capability using a diamond ATR accessory. In this paper, the design of optical apertures for the micro-germanium (Ge) ATR objective is presented for an FT-IR spectroscopic imaging microscope, allowing measurements with different angles of incidence. This approach provides the possibility of three-dimensional (3D) profiling in micro-ATR FT-IR imaging mode. The proof of principle results for measurements of polymer laminate samples at different angles of incidence confirm that controlling the depth of penetration is possible using a Ge ATR objective with added apertures.

  17. From curdlan powder to the triple helix gel structure: an attenuated total reflection-infrared study of the gelation process.

    Science.gov (United States)

    Gagnon, Marc-André; Lafleur, Michel

    2007-04-01

    Infrared spectroscopy was used to probe the hydration and gelation of curdlan, a linear polysaccharide built from repeating units of (1-->3)-beta-D-glucose. The spectra have been recorded using a temperature-controlled attenuated total reflection (ATR) device. Thermal gelation of curdlan could therefore be followed in situ and in real time. The transformation of the low-set gel, mainly formed with single helices, into a high-set gel, associated with a triple helix structure, could be directly observed. The relative intensities and positions of characteristic absorption bands in the C-O region (1200-850 cm-1) were found to be representative of the gel structure, as they are believed to be sensitive to the helical conformation of the polymer chains. Infrared (IR) spectroscopy is shown to be a useful tool for rapid and efficient characterization of curdlan gels.

  18. Attenuated Total Reflection-Fourier transform infrared microspectroscopic mapping for the characterisation of paint cross-sections.

    Science.gov (United States)

    Mazzeo, Rocco; Joseph, Edith; Prati, Silvia; Millemaggi, Aldo

    2007-09-05

    Paint cross-sections have been analysed using the attenuated total reflection technique combined with FTIR mapping microspectroscopy in order to characterise the nature of the compounds present and map their localisation in the stratigraphy. The study reveals the possibilities offered by micro-ATR devices for obtaining informations about the organic substances employed in painting techniques and in particular their distribution in the different layers, showing a real improvement over traditional analytical investigations in use for the detection of organic substances. Limitations, such as the contamination of the embedding resin and the typical spectral resolution (20 microm) are presented and alternative methods were proposed to obtain better results. In particular, the use of an infrared transparent salt (KBr) as embedding material for the cross-sections is evaluated and seems to be very promising. Furthermore, ATR mapping represent a useful non-destructive analytical technique complementary to others molecular and elemental analyses to be performed afterwards such as SEM-EDX.

  19. Historical perspective and modern applications of Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR).

    Science.gov (United States)

    Blum, Marc-Michael; John, Harald

    2012-01-01

    Vibrational spectroscopy has a long history as an important spectroscopic method in chemical and pharmaceutical analysis. Instrumentation for infrared (IR) spectroscopy was revolutionized by the introduction of Fourier Transform Infrared (FTIR) spectrometers. In addition, easier sampling combined with better sample-to-sample reproducibility and user-to-user spectral variation became available with attenuated total reflectance (ATR) probes and their application for in situ IR spectroscopy. These innovations allow many new applications in chemical and pharmaceutical analysis, such as the use of IR spectroscopy in Process Analytical Chemistry (PAC), the quantitation of drugs in complex matrix formulations, the analysis of protein binding and function and in combination with IR microscopy to the emergence of IR imaging technologies. The use of ATR-FTIR instruments in forensics and first response to 'white powder' incidents is also discussed. A short overview is given in this perspective article with the aim to renew and intensify interest in IR spectroscopy.

  20. High-throughput thermal stability analysis of a monoclonal antibody by attenuated total reflection FT-IR spectroscopic imaging.

    Science.gov (United States)

    Boulet-Audet, Maxime; Byrne, Bernadette; Kazarian, Sergei G

    2014-10-07

    The use of biotherapeutics, such as monoclonal antibodies, has markedly increased in recent years. It is thus essential that biotherapeutic production pipelines are as efficient as possible. For the production process, one of the major concerns is the propensity of a biotherapeutic antibody to aggregate. In addition to reducing bioactive material recovery, protein aggregation can have major effects on drug potency and cause highly undesirable immunological effects. It is thus essential to identify processing conditions which maximize recovery while avoiding aggregation. Heat resistance is a proxy for long-term aggregation propensity. Thermal stability assays are routinely performed using various spectroscopic and scattering detection methods. Here, we evaluated the potential of macro attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopic imaging as a novel method for the high-throughput thermal stability assay of a monoclonal antibody. This chemically specific visualization method has the distinct advantage of being able to discriminate between monomeric and aggregated protein. Attenuated total reflection is particularly suitable for selectively probing the bottom of vessels, where precipitated aggregates accumulate. With focal plane array detection, we tested 12 different buffer conditions simultaneously to assess the effect of pH and ionic strength on protein thermal stability. Applying the Finke model to our imaging kinetics allowed us to determine the rate constants of nucleation and autocatalytic growth. This analysis demonstrated the greater stability of our immunoglobulin at higher pH and moderate ionic strength, revealing the key role of electrostatic interactions. The high-throughput approach presented here has significant potential for analyzing the stability of biotherapeutics as well as any other biological molecules prone to aggregation.

  1. Determination of antioxidant capacity and phenolic content of chocolate by attenuated total reflectance-Fourier transformed-infrared spectroscopy.

    Science.gov (United States)

    Hu, Yaxi; Pan, Zhi Jie; Liao, Wen; Li, Jiaqi; Gruget, Pierre; Kitts, David D; Lu, Xiaonan

    2016-07-01

    Antioxidant capacity and phenolic content of chocolate, containing different amounts of cacao (35-100%), were determined using attenuated total reflectance (ATR)-Fourier transformed-infrared (FT-IR) spectroscopy (4000-550cm(-1)). Antioxidant capacities were first characterized using DPPH (2,2-diphenyl-1-picrylhydrazyl) and ORAC (oxygen radical absorbance capacity) assays. Phenolic contents, including total phenol and procyanidins monomers, were quantified using the Folin-Ciocalteu assay and high performance liquid chromatography coupled with photodiode array detector (HPLC-DAD), respectively. Five partial least-squares regression (PLSR) models were constructed and cross-validated using FT-IR spectra from 18 types of chocolate and corresponding reference values determined using DPPH, ORAC, Folin-Ciocalteu, and HPLC assays. The models were validated using seven unknown samples of chocolate. PLSR models showed good prediction capability for DPPH [R(2)-P (prediction)=0.88, RMSEP (root mean squares error of prediction)=12.62μmol Trolox/g DFW], ORAC (R(2)-P=0.90, RMSEP=37.92), Folin-Ciocalteu (R(2)-P=0.88, RMSEP=5.08), and (+)-catechin (R(2)-P=0.86, RMSEP=0.10), but lacked accuracy in the prediction of (-)-epicatechin (R(2)-P=0.72, RMSEP=0.57). ATR-FT-IR spectroscopy can be used for rapid prediction of antioxidant capacity, total phenolic content, and (+)-catechin in chocolate.

  2. Dielectric interlayers for increasing the transparency of metal films for mid-infrared attenuated total reflection spectroscopy.

    Science.gov (United States)

    Reithmeier, Martina; Erbe, Andreas

    2010-11-28

    By depositing a continuous, thin metal film on a substrate coated with a mid-infrared (IR) transparent dielectric film that fulfils the role of an index-matching, anti-reflective coating for the metal, the transparency of the metal in the IR wavelength range can be significantly enhanced. This effect is used to yield enhanced absorption in attenuated total internal reflection infrared (ATR-IR) spectroscopy in the presence of continuous thin metal films. The main limitation of the ATR technique when using continuous metal films is the low transparency of metals, especially for infrared light. Computations and experiments show an enhancement in the absorbance of a sample in contact with the metal at certain wavenumbers when the dielectric interlayer is present. The realisation of the setup is the stratified system consisting of zinc selenide-germanium (~1 μm)-gold (40 nm and 20 nm) using the organic solvent acetonitrile as sample. Enhancement is stronger in s- than in p-polarisation. In s-polarisation, enhancement factors of up to 4 have been observed so far in experiments, but calculations show a route to higher enhancements. In addition to the increased absorption, the absorbance spectra show interference fringes which are due to a mismatch in the real part of the refractive index of the sample in contact with the metal film compared to a reference measurement.

  3. Waveband selection of reagent-free determination for thalassemia screening indicators using Fourier transform infrared spectroscopy with attenuated total reflection.

    Science.gov (United States)

    Long, Xiaoli; Liu, Guisong; Pan, Tao; Chen, Jiemei

    2014-08-01

    A reagent-free determination method for the thalassemia screening indicators hemoglobin (Hb), mean corpuscular Hb (MCH), and mean corpuscular volume (MCV) was developed based on Fourier transform infrared spectrometers equipped with an attenuated total reflection accessory. A random and stability-dependent rigorous process of calibration, prediction, and validation was conducted. Appropriate wavebands were selected using the improved moving window partial least squares method with stability and equivalence. The obtained optimal wavebands were 1722 to 1504 cm⁻¹ for Hb, 1653 to 901 cm⁻¹ for MCH, and 1562 to 964 cm⁻¹ for MCV. A model set equivalent to the optimal model was proposed for each indicator; the public waveband of Hb equivalent wavebands was 1717 to 1510 cm⁻¹, and the public equivalent waveband for MCH and MCV was 1562 to 901 cm⁻¹. All selected wavebands were within the MIR fingerprint region and achieved high validation effects. The sensitivity and specificity were 100.0% and 96.9% for the optimal wavebands and 100.0% and 95.3% for the equivalent wavebands, respectively. Thus, the spectral prediction was highly accurate for determining negative and positive for thalassemia screening. This technique is rapid and simple in comparison with conventional methods and is a promising tool for thalassemia screening in large populations.

  4. Evaluating degradation of silk's fibroin by attenuated total reflectance infrared spectroscopy: case study of ancient banners from Polish collections.

    Science.gov (United States)

    Koperska, M A; Łojewski, T; Łojewska, J

    2015-01-25

    In this study a part of research where artificially aged model samples were used as a guideline to the mechanism of degradation is presented. In previous work Bombyx Mori silk samples were exposed to various environments such as different oxygen, water vapour and volatile organic products content, all at the temperature of 150 °C [11]. Based on those results gathered with by Attenuated Total Reflectance/Fourier Transform Infrared Spectroscopy (ATR-FTIR) the degradation estimators were proposed and classified as follows: (1) Primary functional groups estimators EAmideI/II - intensity ratios of Amide I C=O stretching vibration to Amide II N-H in-plane bending and C-N stretching vibrations A1620/A1514. ECOOH - band 1318 cm(-1) integral to band integral of CH3 bending vibration band located at 1442 cm(-1)P1318/P1442. (2) Secondary conformational estimators EcC=O2 - intensity ratios within Amide I C=O stretching vibration of parallel β-sheet to antiparallel β-sheet A1620/A1699. In this work estimators were verified against estimators calculated from spectra of silk samples from 8 museum objects: 3 from 19th, 2 from 18th, 1 from 17th and 2 from 16th century including 3 banners from the storage resources of the Wawel Royal Castle in Cracow, Poland.

  5. Modeling and Forecasting of Depletion of Additives in Car Engine Oils Using Attenuated Total Reflectance Fast Transform Infrared Spectroscopy

    Directory of Open Access Journals (Sweden)

    Ronald Nguele

    2014-11-01

    Full Text Available On average, additives make up to 7% of a typical lubricant base. Commonly, they are blended with lube oils to enhance specific features thereby improving their qualities. Ultimately, additives participate in the performance of car engine oils. Using an analytical tool, attenuated total reflectance fast transform infrared spectroscopy, various grades of car engine oils, at different mileages, were analyzed. Sulfate oxidation and wear were found to trigger chemical processes which, in the long run, cause lubricant degradation while carbonyl oxidation was observed to occur only at a slow rate. Based upon data obtained from infrared spectra and using a curve fitting technique, mathematical equations predicting the theoretical rates of chemical change due to the aforementioned processes were examined. Additive depletions were found to obey exponential regression rather than polynomial. Moreover, breakpoint (breakpoint is used here to denote the initiation of deterioration of additives and critical mileage (critical mileage defines the distance at which the lubricant is chemically unusable of both samples were determined.

  6. In situ attenuated total reflection FTIR investigations of thin water films in the silanization of ZnSe and Si

    Science.gov (United States)

    Imhof, Roman; Xie, Xianyue; Calzaferri, Gion

    1997-07-01

    In situ attenuated total reflection ATR-FTIR spectroscopy is used to investigate the reaction of trimethylchlorosilane (CH 3) 3SiCl in organic solvents at room temperature on ZnSe and on Si surfaces in the presence and absence of pyridine. In the absence of the base, siloxanes are formed, but they can be removed in situ with the reaction solvent along with the surplus of trimethylchlorosilane and no chemisorption is detected. Instead a thin water film is formed on the surface which shows a well resolved ATR-IR water spectrum with absorptions νas( O H) at 3477 cm -1, νs( O H) at 3421 cm -1, 2δ(HOH) at 3186 cm -1, δ(HOH) + νL at 2182 cm -1 where νL is a librational mode of water and δ(HOH) at 1601 cm -1. These thin water films are astonishingly stable and easy to handle, and their growth can be monitored. Addition of pyridine to the reaction solvent allows the detection of trimethylsilanol with an absorption band at 3706 cm -1. Concurrently pyridinium chloride is formed and partly precipitates on the substrate surface.

  7. In situ permeation study of drug through the stratum corneum using attenuated total reflection Fourier transform infrared spectroscopic imaging

    Science.gov (United States)

    Andanson, Jean-Michel; Hadgraft, Jonathan; Kazarian, Sergei G.

    2009-05-01

    Infrared (IR) spectroscopy is one of the most chemically specific analytical methods that gives information about composition, structure, and interactions in a material. IR spectroscopy has been successfully applied to study the permeation of xenobiotics through the skin. Combining IR spectroscopy with an IR array detector led to the development of Fourier transform infrared (FTIR) spectroscopic imaging, which generates chemical information from different areas of a sample at the microscopic level. This is particularly important for heterogeneous samples, such as skin. Attenuated total reflection (ATR)-FTIR imaging has been applied to measure, in situ, the diffusion of benzyl nicotinate (BN) through the outer layer of human skin [stratum corneum (SC)]. In vitro experiments have demonstrated the heterogeneous distribution of SC surface lipids before the penetration of a saturated solution of BN. Image analysis demonstrated a strong correlation between the distribution of lipids and drugs, while ethanol appeared to be homogenously distributed in the SC. These results show the ability of ATR-FTIR imaging to measure simultaneously the affinities of drug and solvent to the lipid-rich and lipid-poor skin domains, respectively, during permeation. This information may be useful in better understanding drug-diffusion pathways through the SC.

  8. Screening of Wolbachia endosymbiont infection in Aedes aegypti mosquitoes using Attenuated Total Reflection mid-infrared spectroscopy.

    Science.gov (United States)

    Khoshmanesh, Aazam; Christensen, Dale; Perez-Guaita, David; Iturbe-Ormaetxe, Iñaki; O'Neill, Scott L; McNaughton, Don; Wood, Bayden R

    2017-03-23

    Dengue fever is the most common mosquito transmitted viral infection afflicting humans, estimated to generate around 390 million infections each year in over 100 countries. The introduction of the endosymbiotic bacterium Wolbachia into Aedes aegypti mosquitoes has the potential to greatly reduce the public health burden of the disease. This approach requires extensive PCR (Polymerase Chain Reaction) testing of the Wolbachia-infection status of mosquitoes in areas where Wolbachia-A. aegypti are released. Here we report the first example of small organism mid-infrared spectroscopy where we have applied Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy and multivariate modelling methods to determine sex, age and the presence of Wolbachia (wMel strain) in laboratory mosquitoes and sex and age in field mosquitoes. The prediction errors using Partial Least Squares Discriminant Analysis (PLS-DA) discrimination models for laboratory studies on independent test sets ranged from 0 to 3% for age & sex grading, and 3 to 5% for Wolbachia infection diagnosis using dry mosquito abdomens while field study results using an Artificial neural network yielded a 10 % error. The application of FTIR analysis is inexpensive, easy to use, portable, and shows significant potential to replace the reliance on more expensive and laborious PCR assays.

  9. Rapid Quantification of Methamphetamine: Using Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR-FTIR) and Chemometrics

    Science.gov (United States)

    Hughes, Juanita; Ayoko, Godwin; Collett, Simon; Golding, Gary

    2013-01-01

    In Australia and increasingly worldwide, methamphetamine is one of the most commonly seized drugs analysed by forensic chemists. The current well-established GC/MS methods used to identify and quantify methamphetamine are lengthy, expensive processes, but often rapid analysis is requested by undercover police leading to an interest in developing this new analytical technique. Ninety six illicit drug seizures containing methamphetamine (0.1%–78.6%) were analysed using Fourier Transform Infrared Spectroscopy with an Attenuated Total Reflectance attachment and Chemometrics. Two Partial Least Squares models were developed, one using the principal Infrared Spectroscopy peaks of methamphetamine and the other a Hierarchical Partial Least Squares model. Both of these models were refined to choose the variables that were most closely associated with the methamphetamine % vector. Both of the models were excellent, with the principal peaks in the Partial Least Squares model having Root Mean Square Error of Prediction 3.8, R2 0.9779 and lower limit of quantification 7% methamphetamine. The Hierarchical Partial Least Squares model had lower limit of quantification 0.3% methamphetamine, Root Mean Square Error of Prediction 5.2 and R2 0.9637. Such models offer rapid and effective methods for screening illicit drug samples to determine the percentage of methamphetamine they contain. PMID:23936058

  10. Rapid quantification of methamphetamine: using attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR and chemometrics.

    Directory of Open Access Journals (Sweden)

    Juanita Hughes

    Full Text Available In Australia and increasingly worldwide, methamphetamine is one of the most commonly seized drugs analysed by forensic chemists. The current well-established GC/MS methods used to identify and quantify methamphetamine are lengthy, expensive processes, but often rapid analysis is requested by undercover police leading to an interest in developing this new analytical technique. Ninety six illicit drug seizures containing methamphetamine (0.1%-78.6% were analysed using Fourier Transform Infrared Spectroscopy with an Attenuated Total Reflectance attachment and Chemometrics. Two Partial Least Squares models were developed, one using the principal Infrared Spectroscopy peaks of methamphetamine and the other a Hierarchical Partial Least Squares model. Both of these models were refined to choose the variables that were most closely associated with the methamphetamine % vector. Both of the models were excellent, with the principal peaks in the Partial Least Squares model having Root Mean Square Error of Prediction 3.8, R(2 0.9779 and lower limit of quantification 7% methamphetamine. The Hierarchical Partial Least Squares model had lower limit of quantification 0.3% methamphetamine, Root Mean Square Error of Prediction 5.2 and R(2 0.9637. Such models offer rapid and effective methods for screening illicit drug samples to determine the percentage of methamphetamine they contain.

  11. The Advantages of an Attenuated Total Internal Reflection Infrared Microspectroscopic Imaging Technique for the Analysis of Polymer Laminates.

    Science.gov (United States)

    Ling, Chen; Sommer, André J

    2015-06-01

    Until recently, the analysis of polymer laminates using infrared microspectroscopy involved the painstaking separation of individual layers by dissection or by obtaining micrometer thin cross-sections. The latter usually requires the expertise of an individual trained in microtomy and even then, the very structure of the laminate could affect the outcome of the spectral results. The recent development of attenuated total internal reflection (ATR) infrared microspectroscopy imaging has provided a new avenue for the analysis of these multilayer structures. This report compares ATR infrared microspectroscopy imaging with conventional transmission infrared microspectroscopy imaging. The results demonstrate that the ATR method offers improved spatial resolution, eliminates a variety of competing optical processes, and requires minimal sample preparation relative to transmission measurements. These advantages were illustrated using a polymer laminate consisting of 11 different layers whose thickness ranged in size from 4-20 μm. The spatial resolution achieved by using an ATR-FTIR (Fourier transform infrared spectroscopy) imaging technique was diffraction limited. Contrast in the ATR images was enhanced by principal component analysis.

  12. Investigating the structural changes of β-amyloid peptide aggregation using attenuated-total-reflection surface-enhanced Raman spectroscopy

    Science.gov (United States)

    Chiu, K.-C.; Yu, L.-Y.; Yih, J.-N.; Chen, S.-J.

    2007-02-01

    This study utilizes a surface-enhanced Raman spectroscopy (SERS) based on the attenuated-total-reflection (ATR) method to investigate that the structural information of the biomolecular monolayer on sensing surface can be dynamically observed with a higher signal-to-noise ratio signal. The secondary structures of long oligonucleotides and their influence on the DNA hybridization on the sensing surface are investigated. The SERS spectrum provides the structural information of the oligonucleotides with the help of a silver colloidal nanoparticle monolayer by control of the size and distribution of the nanoparticles adapted as a Raman active substrate. It is found that the ring-breathing modes of adenine, thymine, guanine, and cytosine in Raman fingerprint associated with three 60mer oligonucleotides with prominent secondary structures are lower than those observed for the two oligonucleotides with no obvious secondary structures. It is also determined that increasing the DNA hybridization temperature from 35°C to 45°C reduces secondary structure effects. The ATR-SERS biosensing technique will be used to provide valuable structural information regarding the short-term reversible interactions and long-term polymerization events in the Aβ aggregates on the sensing surface.

  13. Application of multibounce attenuated total reflectance fourier transform infrared spectroscopy and chemometrics for determination of aspartame in soft drinks.

    Science.gov (United States)

    Khurana, Harpreet Kaur; Cho, Il Kyu; Shim, Jae Yong; Li, Qing X; Jun, Soojin

    2008-02-13

    Aspartame is a low-calorie sweetener commonly used in soft drinks; however, the maximum usage dose is limited by the U.S. Food and Drug Administration. Fourier transform infrared (FTIR) spectroscopy with attenuated total reflectance sampling accessory and partial least-squares regression (PLS) was used for rapid determination of aspartame in soft drinks. On the basis of spectral characterization, the highest R2 value, and lowest PRESS value, the spectral region between 1600 and 1900 cm(-1) was selected for quantitative estimation of aspartame. The potential of FTIR spectroscopy for aspartame quantification was examined and validated by the conventional HPLC method. Using the FTIR method, aspartame contents in four selected carbonated diet soft drinks were found to average from 0.43 to 0.50 mg/mL with prediction errors ranging from 2.4 to 5.7% when compared with HPLC measurements. The developed method also showed a high degree of accuracy because real samples were used for calibration, thus minimizing potential interference errors. The FTIR method developed can be suitably used for routine quality control analysis of aspartame in the beverage-manufacturing sector.

  14. Rapid quantification of methamphetamine: using attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR) and chemometrics.

    Science.gov (United States)

    Hughes, Juanita; Ayoko, Godwin; Collett, Simon; Golding, Gary

    2013-01-01

    In Australia and increasingly worldwide, methamphetamine is one of the most commonly seized drugs analysed by forensic chemists. The current well-established GC/MS methods used to identify and quantify methamphetamine are lengthy, expensive processes, but often rapid analysis is requested by undercover police leading to an interest in developing this new analytical technique. Ninety six illicit drug seizures containing methamphetamine (0.1%-78.6%) were analysed using Fourier Transform Infrared Spectroscopy with an Attenuated Total Reflectance attachment and Chemometrics. Two Partial Least Squares models were developed, one using the principal Infrared Spectroscopy peaks of methamphetamine and the other a Hierarchical Partial Least Squares model. Both of these models were refined to choose the variables that were most closely associated with the methamphetamine % vector. Both of the models were excellent, with the principal peaks in the Partial Least Squares model having Root Mean Square Error of Prediction 3.8, R(2) 0.9779 and lower limit of quantification 7% methamphetamine. The Hierarchical Partial Least Squares model had lower limit of quantification 0.3% methamphetamine, Root Mean Square Error of Prediction 5.2 and R(2) 0.9637. Such models offer rapid and effective methods for screening illicit drug samples to determine the percentage of methamphetamine they contain.

  15. Analysis of H2O in silicate glass using attenuated total reflectance (ATR) micro-FTIR spectroscopy

    Science.gov (United States)

    Lowenstern, Jacob B.; Pitcher, Bradley W.

    2013-01-01

    We present a calibration for attenuated total reflectance (ATR) micro-FTIR for analysis of H2O in hydrous glass. A Ge ATR accessory was used to measure evanescent wave absorption by H2O within hydrous rhyolite and other standards. Absorbance at 3450 cm−1 (representing total H2O or H2Ot) and 1630 cm−1 (molecular H2O or H2Om) showed high correlation with measured H2O in the glasses as determined by transmission FTIR spectroscopy and manometry. For rhyolite, wt%H2O=245(±9)×A3450-0.22(±0.03) and wt%H2Om=235(±11)×A1630-0.20(±0.03) where A3450 and A1630 represent the ATR absorption at the relevant infrared wavelengths. The calibration permits determination of volatiles in singly polished glass samples with spot size down to ~5 μm (for H2O-rich samples) and detection limits of ~0.1 wt% H2O. Basaltic, basaltic andesite and dacitic glasses of known H2O concentrations fall along a density-adjusted calibration, indicating that ATR is relatively insensitive to glass composition, at least for calc-alkaline glasses. The following equation allows quantification of H2O in silicate glasses that range in composition from basalt to rhyolite: wt%H2O=(ω×A3450/ρ)+b where ω = 550 ± 21, b = −0.19 ± 0.03, ρ = density, in g/cm3, and A3450 is the ATR absorbance at 3450 cm−1. The ATR micro-FTIR technique is less sensitive than transmission FTIR, but requires only a singly polished sample for quantitative results, thus minimizing time for sample preparation. Compared with specular reflectance, it is more sensitive and better suited for imaging of H2O variations in heterogeneous samples such as melt inclusions. One drawback is that the technique can damage fragile samples and we therefore recommend mounting of unknowns in epoxy prior to polishing. Our calibration should hold for any Ge ATR crystals with the same incident angle (31°). Use of a different crystal type or geometry would require measurement of several H2O-bearing standards to provide a crystal

  16. Simultaneous determination of sulphamethoxazole and trimethoprim in powder mixtures by attenuated total reflection-Fourier transform infrared and multivariate calibration.

    Science.gov (United States)

    Silva, Fabiana E B; Ferrão, Marco F; Parisotto, Graciele; Müller, Edson I; Flores, Erico M M

    2009-04-05

    A partial least-squares calibration (PLS) procedure in combination with infrared spectroscopy has been developed for simultaneous determination of sulphamethoxazole (SMZ) and trimethoprim (TMP) in raw material powder mixtures used for manufacturing commercial pharmaceutical products. Multivariate calibration modeling procedures, interval partial least squares (iPLS) and synergy partial least squares (siPLS), were applied to select a spectral range that provided the lowest prediction error in comparison to the full-spectrum model. The experimental matrix was constructed using 49 synthetic samples and 15 commercial samples. The considered concentration ranges were 400-900 mg g(-1) SMZ and 80-240 mg g(-1) TMP. Spectral data were recorded between 650 and 4000 cm(-1) with a 4 cm(-1) resolution by Fourier transform infrared spectroscopy coupled with attenuated total reflectance (ATR-FTIR) accessory. The proposed procedure was compared with conventional procedure by high performance liquid chromatography (HPLC) using 15 commercial samples containing SMZ and TMP. The results showed that PLS regression model combined to ATR-FTIR is a relatively simple, rapid and accurate procedure that could be applied to the simultaneous determination of SMZ and TMP in routine quality control of powder mixtures. A root mean square error of prediction (RMSEP) of 13.18 mg g(-1) for SMZ and 6.03 mg g(-1) for TMP was obtained after selection of better intervals by siPLS. Using the proposed procedure it is possible to analyze each sample in less than 3 min considering two replicates (excluding the grinding step). Accuracy was checked by comparison to HPLC method and agreement better than 98.8% was achieved.

  17. Quantitative determination of competitive molecular adsorption on gold nanoparticles using attenuated total reflectance-Fourier transform infrared spectroscopy.

    Science.gov (United States)

    Tsai, De-Hao; Davila-Morris, Melissa; DelRio, Frank W; Guha, Suvajyoti; Zachariah, Michael R; Hackley, Vincent A

    2011-08-02

    Surface-sensitive quantitative studies of competitive molecular adsorption on nanoparticles were conducted using a modified attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy method. Adsorption isotherms for thiolated poly(ethylene glycol) (SH-PEG) on gold nanoparticles (AuNPs) as a function of molecular mass (1, 5, and 20 kDa) were characterized. We find that surface density of SH-PEG on AuNPs is inversely proportional to the molecular mass (M(m)). Equilibrium binding constants for SH-PEG, obtained using the Langmuir adsorption model, show the binding affinity for SH-PEG is proportional to M(m). Simultaneous competitive adsorption between mercaptopropionic acid (MPA) and 5 kDa SH-PEG (SH-PEG5K) was investigated, and we find that MPA concentration is the dominant factor influencing the surface density of both SH-PEG5K and MPA, whereas the concentration of SH-PEG5K affects only SH-PEG5K surface density. Electrospray differential mobility analysis (ES-DMA) was employed as an orthogonal characterization technique. ES-DMA results are consistent with the results obtained by ATR-FTIR, confirming our conclusions about the adsorption process in this system. Ligand displacement competitive adsorption, where the displacing molecular species is added after completion of the ligand surface binding, was also interrogated by ATR-FTIR. Results indicate that for SH-PEG increasing M(m) yields greater stability on AuNPs when measured against displacement by bovine serum albumin (BSA) as a model serum protein. In addition, the binding affinity of BSA to AuNPs is inhibited for SH-PEG conjugated AuNPs, an effect that is enhanced at higher SH-PEG M(m) values.

  18. [Characterization of kale (Brassica oberacea var acephala) under thallium stress by in situ attenuated total reflection FTIR].

    Science.gov (United States)

    Yao, Yan; Zhang, Ping; Wang, Zhen-Chun; Chen, Yong-Heng

    2009-01-01

    The experiment was designed based on consumption of carbon dioxide through the photosynthesis of Brassica oberacea var acephala leaf, and the photosynthesis of kale leaf under thallium stress was investigated by in situ attenuated total reflection FTIR (in situ ATR-FTIR). The ATR-FTIR showed that the absorption peaks of leaves had no obvious difference between plants growing in thallium stress soil and plants growing in non-thallium pollution soil, and the strong peaks at 3,380 cm(-1) could be assigned to the absorption of water, carbohydrate, protein or amide; the strong peaks at 2,916 and 2,850 cm(-1) assigned to the absorption of carbohydrate or aliphatic compound; the peaks at 1,640 cm(-1) assigned to the absorption of water. However, as detected by the in situ ATR-FTIR, the double peaks (negative peaks) at 2,360 and 2,340 cm(-1) that are assigned to the absorption of CO2 appeared and became high gradually. It was showed that kale was carrying photosynthesis. At the same time, the carbon dioxide consumption speed of leaf under thallium stress was obviously larger than that of the blank It was expressed that photosynthesis under thallium stress was stronger than the blank All these represented that kale had certain tolerance to the heavy metal thallium. Meanwhile, the carbon dioxide consumption of grown-up leaf was more than that of young leaf whether or not under thallium stress. It was also indicated that the intensity of photosynthesis in grown-up leaf is higher than that in young leaf.

  19. A novel, direct, reagent-free method for the detection of beeswax adulteration by single-reflection attenuated total reflectance mid-infrared spectroscopy.

    Science.gov (United States)

    Maia, Miguel; Barros, Ana I R N A; Nunes, Fernando M

    2013-03-30

    In this work, a novel, direct, reagent-free method for the detection of beeswax adulteration by paraffin, microcrystalline wax, tallow and stearic acid using single-reflection attenuated total reflectance mid-infrared spectroscopy was developed. The use of the absorbance ratios of [Formula: see text] , [Formula: see text] and [Formula: see text] allows a minimum of 5% paraffin/microcrystalline wax and tallow adulteration and 0.5% stearic acid adulteration of beeswax to be detected. The upper and lower critical limits for beeswax authenticity were established from the analysis of virgin beeswax and were validated by independent analysis of real sheet and comb beeswax samples using high-temperature gas chromatography with flame-ionization detection. In addition to its simplicity with respect to sample handling, the amount of sample and the time needed are far less than those required in previously described methods, which are based on chemical analysis and chromatographic techniques. These advantages result in time and cost savings, an increase in the number of samples that can be analyzed, and, most importantly, the detection of the main beeswax adulterants using a single method.

  20. Attenuated total internal reflection infrared microspectroscopic imaging using a large-radius germanium internal reflection element and a linear array detector.

    Science.gov (United States)

    Patterson, Brian M; Havrilla, George J

    2006-11-01

    The number of techniques and instruments available for Fourier transform infrared (FT-IR) microspectroscopic imaging has grown significantly over the past few years. Attenuated total internal reflectance (ATR) FT-IR microspectroscopy reduces sample preparation time and has simplified the analysis of many difficult samples. FT-IR imaging has become a powerful analytical tool using either a focal plane array or a linear array detector, especially when coupled with a chemometric analysis package. The field of view of the ATR-IR microspectroscopic imaging area can be greatly increased from 300 x 300 microm to 2500 x 2500 microm using a larger internal reflection element of 12.5 mm radius instead of the typical 1.5 mm radius. This gives an area increase of 70x before aberrant effects become too great. Parameters evaluated include the change in penetration depth as a function of beam displacement, measurements of the active area, magnification factor, and change in spatial resolution over the imaging area. Drawbacks such as large file size will also be discussed. This technique has been successfully applied to the FT-IR imaging of polydimethylsiloxane foam cross-sections, latent human fingerprints, and a model inorganic mixture, which demonstrates the usefulness of the method for pharmaceuticals.

  1. Kinetic modeling of dissolution and crystallization of slurries with attenuated total reflectance UV-visible absorbance and near-infrared reflectance measurements.

    Science.gov (United States)

    Hsieh, Chun H; Billeter, Julien; McNally, Mary Ellen P; Hoffman, Ronald M; Gemperline, Paul J

    2013-06-04

    Slurries are often used in chemical and pharmaceutical manufacturing processes but present challenging online measurement and monitoring problems. In this paper, a novel multivariate kinetic modeling application is described that provides calibration-free estimates of time-resolved profiles of the solid and dissolved fractions of a substance in a model slurry system. The kinetic model of this system achieved data fusion of time-resolved spectroscopic measurements from two different kinds of fiber-optic probes. Attenuated total reflectance UV-vis (ATR UV-vis) and diffuse reflectance near-infrared (NIR) spectra were measured simultaneously in a small-scale semibatch reactor. A simplified comprehensive kinetic model was then fitted to the time-resolved spectroscopic data to determine the kinetics of crystallization and the kinetics of dissolution for online monitoring and quality control purposes. The parameters estimated in the model included dissolution and crystal growth rate constants, as well as the dissolution rate order. The model accurately estimated the degree of supersaturation as a function of time during conditions when crystallization took place and accurately estimated the degree of undersaturation during conditions when dissolution took place.

  2. Application of the Polynomial-Based Least Squares and Total Least Squares Models for the Attenuated Total Reflection Fourier Transform Infrared Spectra of Binary Mixtures of Hydroxyl Compounds.

    Science.gov (United States)

    Shan, Peng; Peng, Silong; Zhao, Yuhui; Tang, Liang

    2016-03-01

    An analysis of binary mixtures of hydroxyl compound by Attenuated Total Reflection Fourier transform infrared spectroscopy (ATR FT-IR) and classical least squares (CLS) yield large model error due to the presence of unmodeled components such as H-bonded components. To accommodate these spectral variations, polynomial-based least squares (LSP) and polynomial-based total least squares (TLSP) are proposed to capture the nonlinear absorbance-concentration relationship. LSP is based on assuming that only absorbance noise exists; while TLSP takes both absorbance noise and concentration noise into consideration. In addition, based on different solving strategy, two optimization algorithms (limited-memory Broyden-Fletcher-Goldfarb-Shanno (LBFGS) algorithm and Levenberg-Marquardt (LM) algorithm) are combined with TLSP and then two different TLSP versions (termed as TLSP-LBFGS and TLSP-LM) are formed. The optimum order of each nonlinear model is determined by cross-validation. Comparison and analyses of the four models are made from two aspects: absorbance prediction and concentration prediction. The results for water-ethanol solution and ethanol-ethyl lactate solution show that LSP, TLSP-LBFGS, and TLSP-LM can, for both absorbance prediction and concentration prediction, obtain smaller root mean square error of prediction than CLS. Additionally, they can also greatly enhance the accuracy of estimated pure component spectra. However, from the view of concentration prediction, the Wilcoxon signed rank test shows that there is no statistically significant difference between each nonlinear model and CLS.

  3. Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR FT-IR) Applied to Study the Distribution of Ink Components in Printed Newspapers.

    Science.gov (United States)

    Gómez, Nuria; Molleda, Cristina; Quintana, Ester; Carbajo, José M; Rodríguez, Alejandro; Villar, Juan C

    2016-09-01

    A new method was developed to study how the oil and cyan pigments of cold-set ink are distributed in newspaper thickness. The methodology involved laboratory printing followed by delamination of the printed paper. The unprinted side, printed side, and resulting layers were analyzed using attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR). Three commercial newspapers and black and cyan cold-set inks were chosen for the study. Attenuated total reflection Fourier transform infrared spectroscopy enabled the proportion of oil and cyan pigment on the printed surface and throughout the sheet thickness to be measured. Oil percentage was evaluated as the area increment of the region from 2800 cm(-1) to 3000 cm(-1) The relative amount of cyan pigment was determined as the area of the absorption band at 730 cm(-1) The ink oil was found mainly below half the paper thickness, whereas the pigment was detected at the layers closer to the printed surface, at a depth penetration of less than 15 µm (20% of thickness). Distribution of these two components in paper thickness depended on the type of cold-set ink, the amount of ink transferred, and the newspaper properties.

  4. Rapid determination of carbohydrates, ash, and extractives contents of straw using attenuated total reflectance fourier transform mid-infrared spectroscopy.

    Science.gov (United States)

    Tamaki, Yukihiro; Mazza, Giuseppe

    2011-06-22

    Analysis of the chemical components of lignocellulosic biomass is essential to understanding its potential for utilization. Mid-infrared spectroscopy and partial least-squares regression were used for rapid measurement of the carbohydrate (total glycans; glucan; xylan; galactan; arabinan; mannan), ash, and extractives content of triticale and wheat straws. Calibration models for total glycans, glucan, and extractives showed good and excellent predictive performance on the basis of slope, r², RPD, and R/SEP criteria. The xylan model showed good and acceptable predictive performance. However, the ash model was evaluated as providing only approximate quantification and screening. The models for galactan, arabinan, and mannan indicated poor and insufficient prediction for application. Most models could predict both triticale and wheat straw samples with the same degree of accuracy. Mid-infrared spectroscopic techniques coupled with partial least-squares regression can be used for rapid prediction of total glycans, glucan, xylan, and extractives in triticale and wheat straw samples.

  5. An attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopic study of gas adsorption on colloidal stearate-capped ZnO catalyst substrate.

    Science.gov (United States)

    Silverwood, Ian P; Keyworth, Colin W; Brown, Neil J; Shaffer, Milo S P; Williams, Charlotte K; Hellgardt, Klaus; Kelsall, Geoff H; Kazarian, Sergei G

    2014-01-01

    Attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy has been applied in situ to study gas adsorption on a colloidal stearate-capped zinc oxide (ZnO) surface. Infrared spectra of a colloidal stearate-capped ZnO catalyst substrate were assigned at room temperature using zinc stearate as a reference compound. Heating was shown to create a monodentate species that allowed conformational change to occur, leading to altered binding geometry of the stearate ligands upon cooling. CO2 and H2 adsorption measurements demonstrated that the ligand shell was permeable and did not cover the entire surface, allowing adsorption and reaction with at least some portion of the ZnO surface. It has been demonstrated that stearate ligands did not prevent the usual chemisorption processes involved in catalytic reactions on a model ZnO catalyst system, yet the ligand-support system is dynamic under representative reaction conditions.

  6. Simultaneous monitoring of curing shrinkage and degree of cure of thermosets by attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy.

    Science.gov (United States)

    Fernàndez-Francos, Xavier; Kazarian, Sergei G; Ramis, Xavier; Serra, Àngels

    2013-12-01

    We present a novel methodology to simultaneously monitor of the degree of cure and curing shrinkage of thermosetting formulations. This methodology is based on the observation of changes in the infrared absorption of reactive functional groups and the groups used as a standard reference for normalization. While the optical path length is exact and controlled in transmission infrared spectroscopy, in attenuated total reflection Fourier transform infrared (ATR FT-IR), the exact determination of volume changes requires the measurement of the refractive indices of the studied system throughout the curing process or at least an indirect parallel measurement of this property. The methodology presented here allows one to achieve quantitative measurements of the degree of cure and shrinkage for thermosets using in situ ATR FT-IR spectroscopy.

  7. Fourier transform infrared-attenuated total reflectance (FTIR-ATR spectroscopy and chemometric techniques for the determination of adulteration in petrodiesel/biodiesel blends

    Directory of Open Access Journals (Sweden)

    Armando Guerrero Peña

    2014-06-01

    Full Text Available We propose an analytical method based on fourier transform infrared-attenuated total reflectance (FTIR-ATR spectroscopy to detect the adulteration of petrodiesel and petrodiesel/palm biodiesel blends with African crude palm oil. The infrared spectral fingerprints from the sample analysis were used to perform principal components analysis (PCA and to construct a prediction model using partial least squares (PLS regression. The PCA results separated the samples into three groups, allowing identification of those subjected to adulteration with palm oil. The obtained model shows a good predictive capacity for determining the concentration of palm oil in petrodiesel/biodiesel blends. Advantages of the proposed method include cost-effectiveness and speed; it is also environmentally friendly.

  8. Optical and electrochemical evaluation of colloidal Au nanoparticle-ITO hybrid optically transparent electrodes and their application to attenuated total reflectance spectroelectrochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, John N.; Aguilar, Zoraida; Kaval, Necati; Andria, Sara E.; Shtoyko, Tanya; Seliskar, Carl J.; Heineman, William R

    2003-12-15

    Colloidal Au nanoparticle monolayers covalently deposited on conductive layers of indium tin oxide (ITO) were fabricated and evaluated as optically transparent electrodes (OTEs) for spectroelectrochemical applications. Specifically, the electrodes were characterized using UV-Vis spectroscopy and cyclic voltammetry; comparisons are made with other types of hybrid ITO optically transparent electrodes. The optical modulation of surface-bound colloidal Au in response to potential cycling over a wide potential window (0.6 to -1.0 V) was acquired in an attenuated total reflectance (ATR) spectroelectrochemical cell. Finally, uptake of a model analyte, tris-(2,2'-bipyridyl)ruthenium(II) chloride, into a Nafion charge selective film spin coated onto the colloidal Au-ITO hybrid electrode was examined using ATR absorbance spectroelectrochemistry. Dependence of uptake on film thickness is addressed, and non-optimized detection limits of 10 nM are reported.

  9. T dependence of vibrational dynamics of water in ion-exchanged zeolites A: a detailed Fourier transform infrared attenuated total reflection study.

    Science.gov (United States)

    Crupi, Vincenza; Longo, Francesca; Majolino, Domenico; Venuti, Valentina

    2005-10-15

    In order to explore the influence of cation substitution on the vibrational dynamics of water molecules in zeolites, the evolution of structural properties of the O-H stretching band of water in fully hydrated Na-A and Mg-exchanged A zeolites has been studied, for different percentages of induced ion exchange, by Fourier transform infrared attenuated total reflection spectroscopy as a function of temperature. The differences revealed in the O-H stretching band shapes have been accounted by fitting the spectra as a sum of four components, corresponding to water molecules exhibiting different types of hydrogen bonding. The dependencies of the relative intensities, peak wave numbers, and bandwidths of the resolved components on temperature and Mg2+ content have been discussed. Evidence of the "structure-maker" role played by a zeolitic surface on physisorbed water, systematically enhanced by increasing the percentage of induced ion exchange, is given in the whole explored temperature range.

  10. Detection of counterfeit Scotch whisky samples using mid-infrared spectrometry with an attenuated total reflectance probe incorporating polycrystalline silver halide fibres.

    Science.gov (United States)

    McIntyre, Allyson C; Bilyk, Madeleine L; Nordon, Alison; Colquhoun, Gary; Littlejohn, David

    2011-04-01

    Two methods of analysis were developed to permit detection of counterfeit Scotch whisky samples using a novel attenuated total reflectance (ATR) diamond-tipped immersion probe for mid-infrared (MIR) spectrometry. The first method allowed determination of the ethanol concentration (35-45% (v/v)) in situ without dilution of the samples; the results obtained compared well with the supplied concentrations (average relative error of 1.2% and 0.8% for univariate and multivariate partial least squares (PLS) calibration, respectively). The second method involved analysis of dried residues of the whisky samples and caramel solutions on the diamond ATR crystal; principal component analysis (PCA) of the spectra was used to classify the samples and investigate the colorant added. Seventeen test whisky samples were successfully categorised as either authentic or counterfeit in a blind study when both MIR methods were used.

  11. Classification of pumpkin seed oils according to their species and genetic variety by attenuated total reflection Fourier-transform infrared spectroscopy.

    Science.gov (United States)

    Saucedo-Hernández, Yanelis; Lerma-García, María Jesús; Herrero-Martínez, José Manuel; Ramis-Ramos, Guillermo; Jorge-Rodríguez, Elisa; Simí-Alfonso, Ernesto F

    2011-04-27

    Attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR), followed by multivariate treatment of the spectral data, was used to classify seed oils of the genus Cucurbita (pumpkins) according to their species as C. maxima, C. pepo, and C. moschata. Also, C. moschata seed oils were classified according to their genetic variety as RG, Inivit C-88, and Inivit C-2000. Up to 23 wavelength regions were selected on the spectra, each region corresponding to a peak or shoulder. The normalized absorbance peak areas within these regions were used as predictors. Using linear discriminant analysis (LDA), an excellent resolution among all categories concerning both Cucurbita species and C. moschata varieties was achieved. The proposed method was straightforward and quick and can be easily implemented. Quality control of pumpkin seed oils is important because Cucurbita species and genetic variety are both related to the pharmaceutical properties of the oils.

  12. CO 2 Capture Capacity and Swelling Measurements of Liquid-like Nanoparticle Organic Hybrid Materials via Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy

    KAUST Repository

    Park, Youngjune

    2012-01-12

    Novel nanoparticle organic hybrid materials (NOHMs), which are comprised of organic oligomers or polymers tethered to an inorganic nanosized cores of various sizes, have been synthesized, and their solvating property for CO 2 was investigated using attenuated total reflectance (ATR) Fourier transform infrared (FT-IR) spectroscopy. Simultaneous measurements of CO 2 capture capacity and swelling behaviors of polyetheramine (Jeffamine M-2070) and its corresponding NOHMs (NOHM-I-PE2070) were reported at temperatures of (298, 308, 323 and 353) K and CO 2 pressure conditions ranging from (0 to 5.5) MPa. The polymeric canopy, or polymer bound to the nanoparticle surface, showed significantly less swelling behavior with enhanced or comparable CO 2 capture capacity compared to pure unbound polyetheramine. © 2011 American Chemical Society.

  13. Attenuated partial internal reflection infrared spectroscopy.

    Science.gov (United States)

    Zhang, Zhenfeng; Ewing, George E

    2002-06-01

    A new method for the spectroscopic study of absorbing films is proposed. In contrast to the well-established methods that take advantage of the attenuation of total internal reflection (ATR) to obtain spectra, we intentionally arrange the optics to permit partial internal reflection from the sampling prism face. Attenuated partial internal reflection (APR) spectroscopy is introduced through theoretical calculations and experimental demonstrations. The calculated APR spectra in the infrared region were generated from the Fresnel and Airy equations. Experimentally, APR spectra of water films on a NaCl prism were obtained. APR is more sensitive than ATR, and can easily distinguish water films at the monolayer level (310 pm). The determination of film thickness from interference fringes in APR spectra is also illustrated. It is shown that APR can be used for film thickness measurements that can span 6 orders of magnitude. The limitations of APR are also discussed.

  14. Measurement of conjugated linoleic acid (CLA) in CLA-rich soy oil by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR).

    Science.gov (United States)

    Kadamne, Jeta V; Jain, Vishal P; Saleh, Mohammed; Proctor, Andrew

    2009-11-25

    Conjugated linoleic acid (CLA) isomers in oils are currently measured as fatty acid methyl esters by a gas chromatography-flame ionization detector (GC-FID) technique, which requires approximately 2 h to complete the analysis. Hence, we aim to develop a method to rapidly determine CLA isomers in CLA-rich soy oil. Soy oil with 0.38-25.11% total CLA was obtained by photo-isomerization of 96 soy oil samples for 24 h. A sample was withdrawn at 30 min intervals with repeated processing using a second batch of oil. Six replicates of GC-FID fatty acid analysis were conducted for each oil sample. The oil samples were scanned using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and the spectrum was collected. Calibration models were developed using partial least-squares (PLS-1) regression using Unscrambler software. Models were validated using a full cross-validation technique and tested using samples that were not included in the calibration sample set. Measured and predicted total CLA, trans,trans CLA isomers, total mono trans CLA isomers, trans-10,cis-12 CLA, trans-9,cis-11 CLA and cis-10,trans-12 CLA, and cis-9,trans-11 CLA had cross-validated coefficients of determinations (R2v) of 0.97, 0.98, 0.97, 0.98, 0.97, and 0.99 and corresponding root-mean-square error of validation (RMSEV) of 1.14, 0.69, 0.27, 0.07, 0.14, and 0.07% CLA, respectively. The ATR-FTIR technique is a rapid and less expensive method for determining CLA isomers in linoleic acid photo-isomerized soy oil than GC-FID.

  15. Attenuated Total Reflectance Fourier transform infrared spectroscopy for determination of Long Chain Free Fatty Acid concentration in oily wastewater using the double wavenumber extrapolation technique.

    Science.gov (United States)

    Hao, Zisu; Malyala, Divya; Dean, Lisa; Ducoste, Joel

    2017-04-01

    Long Chain Free Fatty Acids (LCFFAs) from the hydrolysis of fat, oil and grease (FOG) are major components in the formation of insoluble saponified solids known as FOG deposits that accumulate in sewer pipes and lead to sanitary sewer overflows (SSOs). A Double Wavenumber Extrapolative Technique (DWET) was developed to simultaneously measure LCFFAs and FOG concentrations in oily wastewater suspensions. This method is based on the analysis of the Attenuated Total Reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) spectrum, in which the absorbance of carboxyl bond (1710cm(-1)) and triglyceride bond (1745cm(-1)) were selected as the characteristic wavenumbers for total LCFFAs and FOG, respectively. A series of experiments using pure organic samples (Oleic acid/Palmitic acid in Canola oil) were performed that showed a linear relationship between the absorption at these two wavenumbers and the total LCFFA. In addition, the DWET method was validated using GC analyses, which displayed a high degree of agreement between the two methods for simulated oily wastewater suspensions (1-35% Oleic acid in Canola oil/Peanut oil). The average determination error of the DWET approach was ~5% when the LCFFA fraction was above 10wt%, indicating that the DWET could be applied as an experimental method for the determination of both LCFFAs and FOG concentrations in oily wastewater suspensions. Potential applications of this DWET approach includes: (1) monitoring the LCFFAs and FOG concentrations in grease interceptor (GI) effluents for regulatory compliance; (2) evaluating alternative LCFFAs/FOG removal technologies; and (3) quantifying potential FOG deposit high accumulation zones in the sewer collection system.

  16. Fourier transform infrared-attenuated total reflection nitrate determination of soil pastes using principal component regression, partial least squares, and cross-correlation.

    Science.gov (United States)

    Linker, Raphael; Kenny, Amit; Shaviv, Avi; Singher, Liviu; Shmulevich, Itzhak

    2004-05-01

    This paper investigates the use of Fourier transform infrared (FTIR) attenuated total reflectance (ATR) spectroscopy as a fast and simple way for direct determination of nitrate concentration in soil pastes, which would assist precision fertilizer placement and reduce nitrate pollution. Eight types of soils are investigated, with nitrate concentrations ranging from 0 to 1000 ppm-N. The spectral region around the nitrate band (1300-1550 cm(-1)) is analyzed by (1) principal component regression (PCR), (2) partial least squares (PLS), and (3) cross-correlation with reference libraries that include spectra of pure ions and/or soils. The main obstacle to accurate nitrate measurement appears to be an interfering band present in calcareous soils. This band, which may be due to carbonate, is located around 1450 cm(-1) and overlaps with the nitrate band centered around 1370 cm(-1). For non-calcareous soils, and in particular for light sandy agricultural soils, PLS and cross-correlation with a reference library containing only spectra of ions in water give similar results (about 8 ppm-N on dry soil basis), while PCR leads to slightly poorer results. When calcareous soils are included in the analysis, the prediction errors are about twice as large. In this case, the best results are obtained using PLS, followed by PCR, while cross-correlation with reference libraries leads to poorer results.

  17. Development and validation of an environmentally friendly attenuated total reflectance in the mid-infrared region method for the determination of ethanol content in used engine lubrication oil.

    Science.gov (United States)

    Hatanaka, Rafael Rodrigues; Sequinel, Rodrigo; Gualtieri, Carlos Eduardo; Tercini, Antônio Carlos Bergamaschi; Flumignan, Danilo Luiz; de Oliveira, José Eduardo

    2013-05-15

    Lubricating oils are crucial in the operation of automotive engines because they both reduce friction between moving parts and protect against corrosion. However, the performance of lubricant oil may be affected by contaminants, such as gasoline, diesel, ethanol, water and ethylene glycol. Although there are many standard methods and studies related to the quantification of contaminants in lubricant oil, such as gasoline and diesel oil, to the best of our knowledge, no methods have been reported for the quantification of ethanol in used Otto cycle engine lubrication oils. Therefore, this work aimed at the development and validation of a routine method based on partial least-squares multivariate analysis combined with attenuated total reflectance in the mid-infrared region to quantify ethanol content in used lubrication oil. The method was validated based on its figures of merit (using the net analyte signal) as follows: limit of detection (0.049%), limit of quantification (0.16%), accuracy (root mean square error of prediction=0.089% w/w), repeatability (0.05% w/w), fit (R(2)=0.9997), mean selectivity (0.047), sensitivity (0.011), inverse analytical sensitivity (0.016% w/w(-1)) and signal-to-noise ratio (max: 812.4 and min: 200.9). The results show that the proposed method can be routinely implemented for the quality control of lubricant oils.

  18. Measurement of drug and macromolecule diffusion across atherosclerotic rabbit aorta ex vivo by attenuated total reflection-Fourier transform infrared imaging

    Science.gov (United States)

    Palombo, Francesca; Danoux, Charlène B.; Weinberg, Peter D.; Kazarian, Sergei G.

    2009-07-01

    Diffusion of two model drugs-benzyl nicotinate and ibuprofen-and the plasma macromolecule albumin across atherosclerotic rabbit aorta was studied ex vivo by attenuated total reflection-Fourier transform infrared (ATR-FTIR) imaging. Solutions of these molecules were applied to the endothelial surface of histological sections of the aortic wall that were sandwiched between two impermeable surfaces. An array of spectra, each corresponding to a specific location in the section, was obtained at various times during solute diffusion into the wall and revealed the distribution of the solutes within the tissue. Benzyl nicotinate in Ringer's solution showed higher affinity for atherosclerotic plaque than for apparently healthy tissue. Transmural concentration profiles for albumin demonstrated its permeation across the section and were consistent with a relatively low distribution volume for the macromolecule in the middle of the wall. The ability of albumin to act as a drug carrier for ibuprofen, otherwise undetected within the tissue, was demonstrated by multivariate subtraction image analysis. In conclusion, ATR-FTIR imaging can be used to study transport processes in tissue samples with high spatial and temporal resolution and without the need to label the solutes under study.

  19. Mechanism of formation of humus coatings on mineral surfaces 2. Attenuated total reflectance spectra of hydrophobic and hydrophilic fractions of organic acids from compost leachate on alumina

    Science.gov (United States)

    Wershaw, R. L.; Llaguno, E.C.; Leenheer, J.A.; Sperline, R.P.; Song, Y.

    1996-01-01

    Hydrophobic and hydrophilic fractions were isolated from a compost leachate. The adsorption isotherms of both fractions on alumina were measured by attenuated total reflectance infrared spectroscopy. The shapes of the adsorption isotherms of the two fractions were different. The isotherms for the hydrophilic fraction showed little change in surface excess with increasing solution concentration above 4 mg L-1. The isotherms for the hydrophobic fraction, on the other hand, displayed a marked increase in surface excess with increasing solution concentration. This increase is evidence for the formation of aggregates (admicelles or hemimicelles) on the alumina surface. Linear dichroism calculations indicated that more of the carboxylate groups in the adsorbed hydrophobic molecules than in the absorbed hydrophilic fraction were free to rotate. The hindered rotation of the carboxylate groups in the adsorbed hydrophilic-fraction molecules probably indicates that these groups are bound to surface aluminum ions by a bidentate mechanism in which the two oxygen atoms of a single carboxylate group bind to separate aluminum ions.

  20. A Catalytic Path for Electrolyte Reduction in Lithium-Ion Cells Revealed by in Situ Attenuated Total Reflection-Fourier Transform Infrared Spectroscopy

    KAUST Repository

    Shi, Feifei

    2015-03-11

    © 2015 American Chemical Society. Although controlling the interfacial chemistry of electrodes in Li-ion batteries (LIBs) is crucial for maintaining the reversibility, electrolyte decomposition has not been fully understood. In this study, electrolyte decomposition on model electrode surfaces (Au and Sn) was investigated by in situ attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. Simultaneously obtained ATR-FTIR spectra and cyclic voltammetry measurements show that lithium ethylene dicarbonate and lithium propionate form on the Au electrode at 0.6 V, whereas diethyl 2,5-dioxahexane dicarboxylate and lithium propionate form on the Sn electrode surface at 1.25 V. A noncatalytic reduction path on the Au surface and a catalytic reduction path on the Sn surface are introduced to explain the surface dependence of the overpotential and product selectivity. This represents a new concept for explaining electrolyte reactions on the anode of LIBs. The present investigation shows that catalysis plays a dominant role in the electrolyte decomposition process and has important implications in electrode surface modification and electrolyte recipe selection, which are critical factors for enhancing the efficiency, durability, and reliability of LIBs.

  1. Attenuated total reflectance FT-IR imaging and quantitative energy dispersive-electron probe X-ray microanalysis techniques for single particle analysis of atmospheric aerosol particles.

    Science.gov (United States)

    Ryu, JiYeon; Ro, Chul-Un

    2009-08-15

    This work demonstrates the practical applicability of the combined use of attenuated total reflectance (ATR) FT-IR imaging and low-Z particle electron probe X-ray microanalysis (EPMA) techniques for the characterization of individual aerosol particles. These two single particle analytical techniques provide complementary information on the physicochemical characteristics of the same individual particles, that is, the low-Z particle EPMA for the information on the morphology and elemental concentration and the ATR-FT-IR imaging on the functional group, molecular species, and crystal structure. It was confirmed that the ATR-FT-IR imaging technique can provide sufficient FT-IR absorption signals to perform molecular speciation of individual particles of micrometer size when applied to artificially generated aerosol particles such as ascorbic acid and NaNO(3) aerosols. An exemplar indoor atmospheric aerosol sample was investigated to demonstrate the practical feasibility of the combined application of ATR-FT-IR imaging and low-Z particle EPMA techniques for the characterization of individual airborne particles.

  2. Using attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) to study the molecular conformation of parchment artifacts in different macroscopic states.

    Science.gov (United States)

    Gonzalez, Lee; Wade, Matthew; Bell, Nancy; Thomas, Kate; Wess, Tim

    2013-02-01

    Maintaining appropriate temperatures and relative humidity is considered essential to extending the useful life of parchment artifacts. Although the relationship between environmental factors and changes to the physical state of artifacts is reasonably understood, an improved understanding of the relationship between the molecular conformation and changes to the macroscopic condition of parchment is needed to optimize environmental conditions. Using Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis, the conformation of the molecular structure in selected parchment samples with specific macroscopic conditions, typically discoloration and planar deformations (e.g., cockling and tearing), have been made. The results of this investigation showed that the Fourier transform infrared signal differs for parchment samples exhibiting different macroscopic conditions. In areas exhibiting planar deformation, a change in the Fourier Transform Infrared signal was observed that indicates unfolding of the molecular conformation. In comparison, the discolored samples showed a change in molecular conformation that indicates a chemical change within the collagen molecular structure. This paper discusses the possible causal associations and implications of these findings for the conservation and preservation of parchment artifacts.

  3. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy on Intact Dried Leaves of Sage (Salvia officinalis L.): Accelerated Chemotaxonomic Discrimination and Analysis of Essential Oil Composition.

    Science.gov (United States)

    Gudi, Gennadi; Krähmer, Andrea; Krüger, Hans; Schulz, Hartwig

    2015-10-01

    Sage (Salvia officinalis L.) is cultivated worldwide for its aromatic leaves, which are used as herbal spice, and for phytopharmaceutical applications. Fast analytical strategies for essential oil analysis, performed directly on plant material, would reduce the delay between sampling and analytical results. This would enhance product quality by improving technical control of cultivation. The attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) method described here provides a reliable calibration model for quantification of essential oil components [EOCs; R(2) = 0.96; root-mean-square error of cross-validation (RMSECV) = 0.249 mL 100 g(-1) of dry matter (DM); and range = 1.115-5.280 mL 100 g(-1) of DM] and main constituents [e.g., α-thujone/β-thujone; R(2) = 0.97/0.86; RMSECV = 0.0581/0.0856 mL 100 g(-1) of DM; and range = 0.010-1.252/0.005-0.893 mL 100 g(-1) of DM] directly on dried intact leaves of sage. Except for drying, no further sample preparation is required for ATR-FTIR, and the measurement time of less than 5 min per sample contrasts with the most common alternative of hydrodistillation followed by gas chromatography analysis, which can take several hours per sample.

  4. Rapid, nondestructive estimation of surface polymer layer thickness using attenuated total reflection fourier transform infrared (ATR FT-IR) spectroscopy and synthetic spectra derived from optical principles.

    Science.gov (United States)

    Weinstock, B André; Guiney, Linda M; Loose, Christopher

    2012-11-01

    We have developed a rapid, nondestructive analytical method that estimates the thickness of a surface polymer layer with high precision but unknown accuracy using a single attenuated total reflection Fourier transform infrared (ATR FT-IR) measurement. Because the method is rapid, nondestructive, and requires no sample preparation, it is ideal as a process analytical technique. Prior to implementation, the ATR FT-IR spectrum of the substrate layer pure component and the ATR FT-IR and real refractive index spectra of the surface layer pure component must be known. From these three input spectra a synthetic mid-infrared spectral matrix of surface layers 0 nm to 10,000 nm thick on substrate is created de novo. A minimum statistical distance match between a process sample's ATR FT-IR spectrum and the synthetic spectral matrix provides the thickness of that sample. We show that this method can be used to successfully estimate the thickness of polysulfobetaine surface modification, a hydrated polymeric surface layer covalently bonded onto a polyetherurethane substrate. A database of 1850 sample spectra was examined. Spectrochemical matrix-effect unknowns, such as the nonuniform and molecularly novel polysulfobetaine-polyetherurethane interface, were found to be minimal. A partial least squares regression analysis of the database spectra versus their thicknesses as calculated by the method described yielded an estimate of precision of ±52 nm.

  5. Detection Limits for Blood on Fabrics Using Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy and Derivative Processing.

    Science.gov (United States)

    Lu, Zhenyu; DeJong, Stephanie A; Cassidy, Brianna M; Belliveau, Raymond G; Myrick, Michael L; Morgan, Stephen L

    2016-06-27

    Attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) was used to detect blood stains based on signature protein absorption in the mid-IR region, where intensity changes in the spectrum can be related to blood concentration. Partial least squares regression (PLSR) was applied for multivariate calibrations of IR spectra of blood dilutions on four types of fabric (acrylic, nylon, polyester, and cotton). Gap derivatives (GDs) were applied as a preprocessing technique to optimize the performance of calibration models. We report a much improved IR detection limit (DL) for blood on cotton (2700× in dilution factor units) and the first IR DL reported for blood on nylon (250×). Due to sample heterogeneity caused by fabric hydrophobicity, acrylic fabric produced variable ATR FT-IR spectra that caused poor DLs in concentration units compared to previous work. Polyester showed a similar problem at low blood concentrations that lead to a relatively poor DL as well. However, the increased surface sensitivity and decreased penetration depth of ATR FT-IR make it an excellent choice for detection of small quantities of blood on the front surface of all fabrics tested (0.0010 µg for cotton, 0.0077 µg for nylon, 0.011 µg for acrylic, and 0.0066 µg for polyester).

  6. Simultaneous monitoring of organic acids and sugars in fresh and processed apple juice by Fourier transform infrared-attenuated total reflection spectroscopy.

    Science.gov (United States)

    Irudayaraj, Joseph; Tewari, Jagdish

    2003-12-01

    A combination of Fourier transform infrared spectroscopy (FT-IR) and chemometrics was used as a screening tool for the determination of sugars and organic acids such as sucrose, glucose, fructose, sorbitol, citric acid, and malic acid in processed commercial and extracted fresh apple juices. Prepared samples of synthetic apple juice in different constituent concentration ranges were scanned by attenuated total reflectance (ATR) accessory and the spectral region in the range between 950 and 1500 cm(-1) was selected for calibration model development using partial least squares (PLS) regression and principal component regression (PCR). The calibration models were successfully validated by high-performance liquid chromatography (HPLC) measurements against several commercial juice varieties as well as juice extracted from different apple varieties to provide an overall R2 correlation of 0.998. The present study demonstrates that Fourier transform infrared spectroscopy could be used for rapid and nondestructive determination of multiple constituents in commercial and fresh apple juices. Results indicate this approach to be a rapid and cost-effective tool for routine monitoring of multiple constituents in a fruit juice production facility.

  7. Micro- and macro-attenuated total reflection Fourier transform infrared spectroscopic imaging. Plenary Lecture at the 5th International Conference on Advanced Vibrational Spectroscopy, 2009, Melbourne, Australia.

    Science.gov (United States)

    Kazarian, Sergei G; Chan, K L Andrew

    2010-05-01

    Fourier transform infrared (FT-IR) spectroscopic imaging has become a very powerful method in chemical analysis. In this review paper we describe a variety of opportunities for obtaining FT-IR images using the attenuated total reflection (ATR) approach and provide an overview of fundamental aspects, accessories, and applications in both micro- and macro-ATR imaging modes. The advantages and versatility of both ATR imaging modes are discussed and the spatial resolution of micro-ATR imaging is demonstrated. Micro-ATR imaging has opened up many new areas of study that were previously precluded by inadequate spatial resolution (polymer blends, pharmaceutical tablets, cross-sections of blood vessels or hair, surface of skin, single live cells, cancerous tissues). Recent applications of ATR imaging in polymer research, biomedical and forensic sciences, objects of cultural heritage, and other complex materials are outlined. The latest advances include obtaining spatially resolved chemical images from different depths within a sample, and surface-enhanced images for macro-ATR imaging have also been presented. Macro-ATR imaging is a valuable approach for high-throughput analysis of materials under controlled environments. Opportunities exist for chemical imaging of dynamic aqueous systems, such as dissolution, diffusion, microfluidics, or imaging of dynamic processes in live cells.

  8. Attenuated total reflectance-mid infrared spectroscopy (ATR-MIR) coupled with independent components analysis (ICA): A fast method to determine plasticizers in polylactide (PLA).

    Science.gov (United States)

    Kassouf, Amine; Ruellan, Alexandre; Jouan-Rimbaud Bouveresse, Delphine; Rutledge, Douglas N; Domenek, Sandra; Maalouly, Jacqueline; Chebib, Hanna; Ducruet, Violette

    2016-01-15

    Compliance of plastic food contact materials (FCMs) with regulatory specifications in force, requires a better knowledge of their interaction phenomena with food or food simulants in contact. However these migration tests could be very complex, expensive and time-consuming. Therefore, alternative procedures were introduced based on the determination of potential migrants in the initial material, allowing the use of mathematical modeling, worst case scenarios and other alternative approaches, for simple and fast compliance testing. In this work, polylactide (PLA), plasticized with four different plasticizers, was considered as a model plastic formulation. An innovative analytical approach was developed, based on the extraction of qualitative and quantitative information from attenuated total reflectance (ATR) mid-infrared (MIR) spectral fingerprints, using independent components analysis (ICA). Two novel chemometric methods, Random_ICA and ICA_corr_y, were used to determine the optimal number of independent components (ICs). Both qualitative and quantitative information, related to the identity and the quantity of plasticizers in PLA, were retrieved through a direct and fast analytical method, without any prior sample preparations. Through a single qualitative model with 11 ICs, a clear and clean classification of PLA samples was obtained, according to the identity of plasticizers incorporated in their formulations. Moreover, a quantitative model was established for each formulation, correlating proportions estimated by ICA and known concentrations of plasticizers in PLA. High coefficients of determination (higher than 0.96) and recoveries (higher than 95%) proved the good predictability of the proposed models.

  9. Evaluation of low trans fat edible oils by attenuated total reflection-Fourier transform infrared spectroscopy and gas chromatography: a comparison of analytical approaches.

    Science.gov (United States)

    Tyburczy, Cynthia; Mossoba, Magdi M; Fardin-Kia, Ali Reza; Rader, Jeanne I

    2012-08-01

    Current interest by the food industry in exploring reformulation options that lower the content of trans fat in edible fats and oils requires methods to accurately measure low levels of trans fat. In the present study, the quantitation of trans fat in 25 edible fat and oil samples was evaluated using two current analytical approaches, attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), and gas chromatography with flame ionization detection (GC-FID) according to Official Methods of the American Oil Chemists' Society. Significant differences between the ATR-FTIR and reference GC-FID quantitations were found for samples with a trans fat content fat. These discrepancies could be explained, in part, by the presence of certain oil constituents (e.g., vitamins, carotenoids, high levels of saturated fat) that produced absorbance bands at or near 966 cm(-1) in the ATR-FTIR spectra, a region that was previously identified as being characteristic of isolated trans double bonds. Results demonstrate that the natural content of such oil constituents could result in significant overestimations of trans fat when ATR-FTIR is used to analyze edible fats and oils with a trans fat content fat.

  10. A simple, sensitive and non-destructive technique for characterizing bovine dental enamel erosion: attenuated total reflection Fourier transform infrared spectroscopy.

    Science.gov (United States)

    Kim, In-Hye; Son, Jun Sik; Min, Bong Ki; Kim, Young Kyoung; Kim, Kyo-Han; Kwon, Tae-Yub

    2016-03-30

    Although many techniques are available to assess enamel erosion in vitro, a simple, non-destructive method with sufficient sensitivity for quantifying dental erosion is required. This study characterized the bovine dental enamel erosion induced by various acidic beverages in vitro using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. Deionized water (control) and 10 acidic beverages were selected to study erosion, and the pH and neutralizable acidity were measured. Bovine anterior teeth (110) were polished with up to 1 200-grit silicon carbide paper to produce flat enamel surfaces, which were then immersed in 20 mL of the beverages for 30 min at 37 °C. The degree of erosion was evaluated using ATR-FTIR spectroscopy and Vickers' microhardness measurements. The spectra obtained were interpreted in two ways that focused on the ν1, ν3 phosphate contour: the ratio of the height amplitude of ν3 PO4 to that of ν1 PO4 (Method 1) and the shift of the ν3 PO4 peak to a higher wavenumber (Method 2). The percentage changes in microhardness after the erosion treatments were primarily affected by the pH of the immersion media. Regression analyses revealed highly significant correlations between the surface hardness change and the degree of erosion, as detected by ATR-FTIR spectroscopy (PFTIR spectroscopy is potentially advantageous over the microhardness test as a simple, non-destructive, sensitive technique for the quantification of enamel erosion.

  11. Detection and quantification of soymilk in cow-buffalo milk using Attenuated Total Reflectance Fourier Transform Infrared spectroscopy (ATR-FTIR).

    Science.gov (United States)

    Jaiswal, Pranita; Jha, Shyam Narayan; Borah, Anjan; Gautam, Anuj; Grewal, Manpreet Kaur; Jindal, Gaurav

    2015-02-01

    Milk consumption is steadily increasing, especially in India and China, due to rising income. To bridge the gap between supply and demand, unscrupulous milk vendors add milk-like products from vegetable sources (soymilk) to milk without declaration. A rapid detection technique is required to enforce the safety norms of food regulatory authorities. Fourier Transform Infrared (FTIR) spectroscopy has demonstrated potential as a rapid quality monitoring method and was therefore explored for detection of soymilk in milk. In the present work, spectra of milk, soymilk (SM), and milk adulterated with known quantity of SM were acquired in the wave number range of 4000-500cm(-1) using Attenuated Total Reflectance (ATR)-FTIR. The acquired spectra revealed differences amongst milk, SM and adulterated milk (AM) samples in the wave number range of 1680-1058cm(-1). This region encompasses the absorption frequency of amide-I, amide-II, amide-III, beta-sheet protein, α-tocopherol and Soybean Kunitz Trypsin Inhibitor. Principal component analysis (PCA) showed clustering of samples based on SM concentration at 5% level of significance and thus SM could be detected in milk using ATR-FTIR. The SM was best predicted in the range of 1472-1241cm(-1) using multiple linear regression with coefficient of determination (R(2)) of 0.99 and 0.92 for calibration and validation, respectively.

  12. Fourier transform infra-red spectroscopy using an attenuated total reflection probe to distinguish between Japanese larch, pine and citrus plants in healthy and diseased states

    Science.gov (United States)

    Gandolfo, D. S.; Mortimer, H.; Woodhall, J. W.; Boonham, N.

    2016-06-01

    FTIR spectroscopy coupled with an Attenuated Total Reflection (ATR) sampling probe has been demonstrated as a technique for detecting disease in plants. Spectral differences were detected in Japanese Larch (Larix kaempferi) infected with Phytophthora ramorum at 3403 cm-1 and 1730 cm-1, from pine (Pinus spp.) infected with Bursaphelenchus xylophilus at 1070 cm-1, 1425 cm-1, 1621 cm-1 and 3403 cm-1 and from citrus (Citrus spp.) infected with 'Candidatus liberibacter' at 960 cm-1, 1087 cm-1, 1109 cm-1, 1154 cm-1, 1225 cm-1, 1385 cm-1, 1462 cm-1, 1707 cm-1, 2882 cm-1, 2982 cm-1 and 3650 cm-1. A spectral marker in healthy citrus has been identified as Pentanone but is absent from the diseased sample spectra. This agrees with recent work by Aksenov, 2014. Additionally, the spectral signature of Cutin was identified in the spectra of Pinus spp. and Citrus spp. and is consistent with work by Dubis, 1999 and Heredia-Guerrero, 2014.

  13. Simultaneous probing of bulk liquid phase and catalytic gas-liquid-solid interface under working conditions using attenuated total reflection infrared spectroscopy

    Science.gov (United States)

    Meemken, Fabian; Müller, Philipp; Hungerbühler, Konrad; Baiker, Alfons

    2014-08-01

    Design and performance of a reactor set-up for attenuated total reflection infrared (ATR-IR) spectroscopy suitable for simultaneous reaction monitoring of bulk liquid and catalytic solid-liquid-gas interfaces under working conditions are presented. As advancement of in situ spectroscopy an operando methodology for gas-liquid-solid reaction monitoring was developed that simultaneously combines catalytic activity and molecular level detection at the catalytically active site of the same sample. Semi-batch reactor conditions are achieved with the analytical set-up by implementing the ATR-IR flow-through cell in a recycle reactor system and integrating a specifically designed gas feeding system coupled with a bubble trap. By the use of only one spectrometer the design of the new ATR-IR reactor cell allows for simultaneous detection of the bulk liquid and the catalytic interface during the working reaction. Holding two internal reflection elements (IRE) the sample compartments of the horizontally movable cell are consecutively flushed with reaction solution and pneumatically actuated, rapid switching of the cell (<1 s) enables to quasi simultaneously follow the heterogeneously catalysed reaction at the catalytic interface on a catalyst-coated IRE and in the bulk liquid on a blank IRE. For a complex heterogeneous reaction, the asymmetric hydrogenation of 2,2,2-trifluoroacetophenone on chirally modified Pt catalyst the elucidation of catalytic activity/enantioselectivity coupled with simultaneous monitoring of the catalytic solid-liquid-gas interface is shown. Both catalytic activity and enantioselectivity are strongly dependent on the experimental conditions. The opportunity to gain improved understanding by coupling measurements of catalytic performance and spectroscopic detection is presented. In addition, the applicability of modulation excitation spectroscopy and phase-sensitive detection are demonstrated.

  14. Simultaneous probing of bulk liquid phase and catalytic gas-liquid-solid interface under working conditions using attenuated total reflection infrared spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Meemken, Fabian; Müller, Philipp; Hungerbühler, Konrad; Baiker, Alfons, E-mail: baiker@chem.ethz.ch [Department of Chemistry and Applied Biosciences, Institute for Chemical and Bioengineering, ETH Zürich, Hönggerberg, HCI, CH-8093 Zürich (Switzerland)

    2014-08-15

    Design and performance of a reactor set-up for attenuated total reflection infrared (ATR-IR) spectroscopy suitable for simultaneous reaction monitoring of bulk liquid and catalytic solid-liquid-gas interfaces under working conditions are presented. As advancement of in situ spectroscopy an operando methodology for gas-liquid-solid reaction monitoring was developed that simultaneously combines catalytic activity and molecular level detection at the catalytically active site of the same sample. Semi-batch reactor conditions are achieved with the analytical set-up by implementing the ATR-IR flow-through cell in a recycle reactor system and integrating a specifically designed gas feeding system coupled with a bubble trap. By the use of only one spectrometer the design of the new ATR-IR reactor cell allows for simultaneous detection of the bulk liquid and the catalytic interface during the working reaction. Holding two internal reflection elements (IRE) the sample compartments of the horizontally movable cell are consecutively flushed with reaction solution and pneumatically actuated, rapid switching of the cell (<1 s) enables to quasi simultaneously follow the heterogeneously catalysed reaction at the catalytic interface on a catalyst-coated IRE and in the bulk liquid on a blank IRE. For a complex heterogeneous reaction, the asymmetric hydrogenation of 2,2,2-trifluoroacetophenone on chirally modified Pt catalyst the elucidation of catalytic activity/enantioselectivity coupled with simultaneous monitoring of the catalytic solid-liquid-gas interface is shown. Both catalytic activity and enantioselectivity are strongly dependent on the experimental conditions. The opportunity to gain improved understanding by coupling measurements of catalytic performance and spectroscopic detection is presented. In addition, the applicability of modulation excitation spectroscopy and phase-sensitive detection are demonstrated.

  15. Simultaneous probing of bulk liquid phase and catalytic gas-liquid-solid interface under working conditions using attenuated total reflection infrared spectroscopy.

    Science.gov (United States)

    Meemken, Fabian; Müller, Philipp; Hungerbühler, Konrad; Baiker, Alfons

    2014-08-01

    Design and performance of a reactor set-up for attenuated total reflection infrared (ATR-IR) spectroscopy suitable for simultaneous reaction monitoring of bulk liquid and catalytic solid-liquid-gas interfaces under working conditions are presented. As advancement of in situ spectroscopy an operando methodology for gas-liquid-solid reaction monitoring was developed that simultaneously combines catalytic activity and molecular level detection at the catalytically active site of the same sample. Semi-batch reactor conditions are achieved with the analytical set-up by implementing the ATR-IR flow-through cell in a recycle reactor system and integrating a specifically designed gas feeding system coupled with a bubble trap. By the use of only one spectrometer the design of the new ATR-IR reactor cell allows for simultaneous detection of the bulk liquid and the catalytic interface during the working reaction. Holding two internal reflection elements (IRE) the sample compartments of the horizontally movable cell are consecutively flushed with reaction solution and pneumatically actuated, rapid switching of the cell (interface on a catalyst-coated IRE and in the bulk liquid on a blank IRE. For a complex heterogeneous reaction, the asymmetric hydrogenation of 2,2,2-trifluoroacetophenone on chirally modified Pt catalyst the elucidation of catalytic activity/enantioselectivity coupled with simultaneous monitoring of the catalytic solid-liquid-gas interface is shown. Both catalytic activity and enantioselectivity are strongly dependent on the experimental conditions. The opportunity to gain improved understanding by coupling measurements of catalytic performance and spectroscopic detection is presented. In addition, the applicability of modulation excitation spectroscopy and phase-sensitive detection are demonstrated.

  16. Determination of total phenolic content and antioxidant activity of garlic (Allium sativum) and elephant garlic (Allium ampeloprasum) by attenuated total reflectance-Fourier transformed infrared spectroscopy.

    Science.gov (United States)

    Lu, Xiaonan; Ross, Carolyn F; Powers, Joseph R; Aston, D Eric; Rasco, Barbara A

    2011-05-25

    The total phenolic contents and antioxidant activities of garlics from California, Oregon, Washington, and New York were determined by Fourier transform infrared (FT-IR) spectroscopy (400-4000 cm(-1)). The total phenolic content was quantified [Folin-Ciocalteu assay (FC)] and three antioxidant activity assays, 2,2-diphenyl-picrylhydrazyl (DPPH) assay, Trolox equivalent antioxidant capacity (TEAC) assay, and ferric reducing antioxidant power (FRAP), were employed for reference measurements. Four independent partial least-squares regression (PLSR) models were constructed with spectra from 25 extracts and their corresponding FC, DPPH, TEAC, and FRAP with values for 20 additional extracts predicted (R > 0.95). The standard errors of calibration and standard error of cross-validation were <1.45 (TEAC), 0.36 (FRAP), and 0.33 μmol Trolox/g FW (DPPH) and 0.55 mg gallic acid/g FW (FC). Cluster and dendrogram analyses could segregate garlic grown at different locations. Hydroxyl and phenolic functional groups most closely correlated with garlic antioxidant activity.

  17. Investigation of applicability of a mid-infrared spectroscopic method using an attenuated total reflection accessory and a new near-infrared transmission method for determination of faecal fat

    NARCIS (Netherlands)

    Volmer, M; Kingma, AW; Borsboom, PCF; Wolthers, BG; Kema, IP

    2001-01-01

    In many laboratories, the titrimetric method of Van de Kamer is used for the analysis of faecal fat content of patients suspected of steatorrhoea. We investigated the applicability of a mid-infrared (MIR) spectroscopic method, using an attenuated total reflection (ATR) accessory, and a new near-infr

  18. In situ evaluation of net nitrification rate in Terra rossa soil using a Fourier transform infrared attenuated total reflection 15N tracing technique.

    Science.gov (United States)

    Du, Changwen; Linker, Raphael; Shaviv, Avi; Zhou, Jianmin

    2009-10-01

    Nitrification and mineralization of organic nitrogen (N) are important N transformation processes in soil, and mass spectrometry is a suitable technique for tracing changes of (15)N isotopic species of mineral N and estimating the rates of these processes. However, mass spectrometric methods for tracing N dynamics are costly, time consuming, and require long and laborious preparation procedures. This study investigates mid-infrared attenuated total reflection (ATR) spectroscopy as an alternative method for detecting changes in (14)NO(3)-N and (15)NO(3)-N concentrations. There is a significant shift of the nu(3) absorption band of nitrate according to N species, namely from the 1275 to 1460 cm(-1) region for (14)NO(3)(-) to the 1240-1425 cm(-1) region for (15)NO(3). This shift makes it possible to quantify the N isotopes using multivariate calibration methods. Partial least squares regression (PLSR) models with five factors yielded a determination error of 6.7-9.2 mg N L(-1) for aqueous solutions and 5.9-7.8 mg N kg(-1) (dry soil) for pastes of a Terra rossa soil. These PLSR models were used to monitor the changes of (15)NO(3)-N and (14)NO(3)-N content in the same Terra rossa soil during an incubation experiment in which [(15)NH(4)](2)SO(4) was applied to the soil, allowing the estimation of the contributions of applied N and mineralized N to the net nitrification rate, the potential losses of the applied (15)NH(4)-N, and the net mineralization of soil organic N.

  19. A simple, sensitive and non-destructive technique for characterizing bovine dental enamel erosion:attenuated total reflection Fourier transform infrared spectroscopy

    Institute of Scientific and Technical Information of China (English)

    In-Hye Kim; Jun Sik Son; Bong Ki Min; Young Kyoung Kim; Kyo-Han Kim; Tae-Yub Kwon

    2016-01-01

    Although many techniques are available to assess enamel erosion in vitro, a simple, non-destructive method with sufficient sensitivity for quantifying dental erosion is required. This study characterized the bovine dental enamel erosion induced by various acidic beverages in vitro using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. Deionized water (control) and 10 acidic beverages were selected to study erosion, and the pH and neutralizable acidity were measured. Bovine anterior teeth (110) were polished with up to 1 200-grit silicon carbide paper to produce flat enamel surfaces, which were then immersed in 20 mL of the beverages for 30 min at 37 °C. The degree of erosion was evaluated using ATR-FTIR spectroscopy and Vickers’ microhardness measurements. The spectra obtained were interpreted in two ways that focused on the ν1, ν3 phosphate contour: the ratio of the height amplitude of ν3 PO4 to that of ν1 PO4 (Method 1) and the shift of the ν3 PO4 peak to a higher wavenumber (Method 2). The percentage changes in microhardness after the erosion treatments were primarily affected by the pH of the immersion media. Regression analyses revealed highly significant correlations between the surface hardness change and the degree of erosion, as detected by ATR-FTIR spectroscopy (Po0.001). Method 1 was the most sensitive to these changes, followed by surface hardness change measurements and Method 2. This study suggests that ATRFTIR spectroscopy is potentially advantageous over the microhardness test as a simple, non-destructive, sensitive technique for the quantification of enamel erosion.

  20. Chemical Functionalization of Germanium with Dextran Brushes for Immobilization of Proteins Revealed by Attenuated Total Reflection Fourier Transform Infrared Difference Spectroscopy.

    Science.gov (United States)

    Schartner, Jonas; Hoeck, Nina; Güldenhaupt, Jörn; Mavarani, Laven; Nabers, Andreas; Gerwert, Klaus; Kötting, Carsten

    2015-07-21

    Protein immobilization studied by attenuated total reflection Fourier transform infrared (ATR-FT-IR) difference spectroscopy is an emerging field enabling the study of proteins at atomic detail. Gold or glass surfaces are frequently used for protein immobilization. Here, we present an alternative method for protein immobilization on germanium. Because of its high refractive index and broad spectral window germanium is the best material for ATR-FT-IR spectroscopy of thin layers. So far, this technique was mainly used for protein monolayers, which lead to a limited signal-to-noise ratio. Further, undesired protein-protein interactions can occur in a dense layer. Here, the germanium surface was functionalized with thiols and stepwise a dextran brush was generated. Each step was monitored by ATR-FT-IR spectroscopy. We compared a 70 kDa dextran with a 500 kDa dextran regarding the binding properties. All surfaces were characterized by atomic force microscopy, revealing thicknesses between 40 and 110 nm. To analyze the capability of our system we utilized N-Ras on mono-NTA (nitrilotriacetic acid) functionalized dextran, and the amount of immobilized Ras corresponded to several monolayers. The protein stability and loading capacity was further improved by means of tris-NTA for immobilization. Small-molecule-induced changes were revealed with an over 3 times higher signal-to-noise ratio compared to monolayers. This improvement may allow the observation of very small and so far hidden changes in proteins upon stimulus. Furthermore, we immobilized green fluorescent protein (GFP) and mCherry simultaneously enabling an analysis of the surface by fluorescence microscopy. The absence of a Förster resonance energy transfer (FRET) signal demonstrated a large protein-protein distance, indicating an even distribution of the protein within the dextran.

  1. The problem of 2,4,6-trichloroanisole in cork planks studied by attenuated total reflection infrared spectroscopy: proof of concept.

    Science.gov (United States)

    Garcia, Ana R; Lopes, Luís F; Brito de Barros, Ricardo; Ilharco, Laura M

    2015-01-14

    Attenuated total reflection infrared spectroscopy (ATR-IR) proved to be a promising detection technique for 2,4,6-trichloroanisole (TCA), which confers organoleptic defects to bottled alcoholic beverages, allowing the proposal of a criterion for cork plank acceptance when meant for stopper production. By analysis of a significant number of samples, it was proved that the presence of TCA, even in very low concentrations, imparts subtle changes to the cork spectra, namely, the growth of two new bands at ∼1417 (νC═C of TCA ring) and 1314 cm–1 (a shifted νCC of TCA) and an increase in the relative intensities of the bands at ∼1039 cm–1 (δCO of polysaccharides) and ∼813 cm–1 (τCH of suberin), the latter by overlapping with intense bands of TCA. These relative intensities were evaluated in comparison to a fingerprint of suberin (νasC–O–C), at 1161 cm–1. On the basis of those spectral variables, a multivariate statistics linear analysis (LDA) was performed to obtain a discriminant function that allows classifying the samples according to whether they contain or not TCA. The methodology proposed consists of a demanding acceptance criterion for cork planks destined for stopper production (with the guarantee of nonexistence of TCA) that results from combining the quantitative results with the absence of the two TCA correlated bands. ATR infrared spectroscopy is a nondestructive and easy to apply technique, both on cork planks and on stoppers, and has proven more restrictive than other techniques used in the cork industry that analyze the cleaning solutions. At the level of proof of concept, the method here proposed is appealing for high-value stopper applications.

  2. Application of Terahertz Attenuated Total Reflection Spectroscopy to Detect Changes in the Physical Properties of Lactose during the Lubrication Process Required for Drug Formulation.

    Science.gov (United States)

    Dohi, Masafumi; Momose, Wataru; Yamashita, Kazunari; Hakomori, Tadashi; Sato, Shusaku; Noguchi, Shuji; Terada, Katsuhide

    2017-02-01

    Manufacturing the solid dosage form of an orally administered drug requires lubrication to enhance manufacturability, ensuring that critical quality attributes such as disintegration and dissolution of the drug product are maintained during manufacture. Here, to evaluate lubrication performance during manufacture, we used terahertz attenuated total reflection (THz-ATR) spectroscopy to detect differences in the physical characteristics of the lubricated powder. We applied a simple formulation prepared by blending granulated lactose as filler with magnesium stearate as lubricant. A flat tablet was prepared using the lubricated powder to acquire sharp THz-ATR absorption peaks of the samples. First, we investigated the effects of lubricant concentration and compression pressure on preparation of the tablet and then determined the effect of the pressure applied to samples in contact with the ATR prism on sample absorption amplitude. We focused on the differences in the magnitudes of spectra at the lactose-specific frequency. Second, we conducted the dynamic lubrication process using a 120-L mixer to investigate differences in the magnitudes of absorption corresponding to the lactose-specific frequency during lubrication. In both studies, enriching the lubricated powder with a higher concentration of magnesium stearate or prolonging blending time correlated with higher magnitudes of spectra at the lactose-specific frequency. Further, in the dynamic lubrication study, the wettability and disintegration time of the tablets were compared with the absorption spectra amplitudes at the lactose-specific frequency. We conclude that THz-ATR spectroscopy is useful for detecting differences in densities caused by a change in the physical properties of lactose during lubrication.

  3. Optimized data analysis algorithm for on-site chemical identification using a hand-held attenuated total reflection Fourier transform infrared (ATR FT-IR) spectrometer.

    Science.gov (United States)

    Ron, Izhar; Zaltsman, Amalia; Kendler, Shai

    2013-12-01

    On-site identification of organic compounds in the presence of interfering materials using a field-portable attenuated total reflection Fourier transform infrared (ATR FT-IR) spectrometer is presented. Identification is based on an algorithm that compares the analyte's infrared absorption spectrum with the reference spectra. The comparison is performed at several predetermined frequencies, and a similarity value (distance) between the measured and the reference spectra is calculated either at each frequency individually, or, alternatively, the average distance for all frequencies is calculated. The examined frequencies are selected to give the best contrast between the target materials of interest. In this study, the algorithm was optimized to identify three common chemical warfare agents (CWAs): O-ethyl S-[2-(diisopropylamino)ethyl] methylphosphonothioic acid (VX), sarin (GB), and sulfur mustard (bis(2-chloroethyl) sulfide) (HD), in the presence of field-related interfering materials (fuels, water, and dust). Receiver operating characteristics analysis was performed in order to determine the probabilities for detection (PD) and for false alerts (PF). Challenging the algorithm with a set of data that contains mixtures of CWAs and interfering materials resulted in PD of 90% and PF of 0%, 0%, and 1% for VX, GB, and HD, respectively, using the average distance approach, which was found to be much more effective than analyzing each frequency individually. This finding was validated for all possible combinations of 2-7 peaks per material. It is suggested that this algorithm provides a reliable mean for the identification of a predetermined set of target analytes and interfering materials.

  4. Application of target partial least squares for analysis of Fourier transform infrared-attenuated total reflection hyperspectral images for characterization of the distribution of crop protection products on the leaf surface.

    Science.gov (United States)

    Budevska, Boiana O

    2009-09-01

    Target partial least squares (PLS) is applied to Fourier transform infrared-attenuated total reflection (FT-IR-ATR) hyperspectral images of plant leaf surface treated with crop protection products. Detection of active ingredient is demonstrated at application rates of 50 g active ingredient per hectare. This sensitivity could not be achieved without the application of multivariate analysis. Quantitative information appears to be easily recovered through analysis of combined images with known and unknown amounts of active ingredient.

  5. Attenuated Total Reflection-Fourier Transform Infrared Spectroscopic Study of Dried Shark Fin Products%鱼翅干制品品质的ATR-FTIR鉴别研究

    Institute of Scientific and Technical Information of China (English)

    韩婉清; 罗海英; 冼燕萍; 罗东辉; 穆同娜; 郭新东

    2015-01-01

    Sixty-four pieces of shark fin dried products (including real,fake and artificial shark fin products)and real products coated with gelatin were rapidly and nondestructively analyzed by attenuated total reflection-Fourier transform infrared spectros-copy (ATR-FTIR).The characteristic of IR spectrograms among the above four kinds of samples were systematically studied and comparied,the results showed that the spectrograms of the same kind of samples were repeatable,and different kinds of shark fin products presented significant differences in the spectrograms,which mainly manifested as the specific absorption peaks of amido bonds in protein (1 650,1 544 cm-1 )and skeletal vibration in polysaccharide (1 050 cm-1 ).The spectrograms of real shark fins were characterized by the strong absorption peaks of protein characteristic amide Ⅰ and Ⅱ absorbent (1 650,1 544 cm-1 )and relatively weak C—O—C vibration absorbent (1 050 cm-1 )owing to the high content of protein and relatively low level of polysaccharide.For fake shark fin products that were molded form by mixing together with the offcut of shark,collagen and other substances,the introduction of non-protein materials leaded to the weaker amido bonds absorbent than real products along with a 30 cm-1 blue shift of amide Ⅰabsorbent.Opposite to the real sample,the relatively strong absorption peak of poly-saccharide (~1 047 cm-1 )and barely existed amide absorbent were the key features of the spectrogram of artificial samples, which was synthersized by polysaccharide like sodium alginate.Real samples coated with gelatin,the peak strength of protein and polysaccharide were decreased simultaneously when the data collection was taken at the surface of sample,while the spectro-gram presented no significant difference to real samples when the data was collected in the section.The results above indicated that by analyzing the characteristic of IR spectrograms and the value range of Apro/Apol collected by ATR

  6. Application of Attenuated Total Reflectance-Fourier Transformed Infrared (ATR-FTIR) Spectroscopy To Determine the Chlorogenic Acid Isomer Profile and Antioxidant Capacity of Coffee Beans.

    Science.gov (United States)

    Liang, Ningjian; Lu, Xiaonan; Hu, Yaxi; Kitts, David D

    2016-01-27

    The chlorogenic acid isomer profile and antioxidant activity of both green and roasted coffee beans are reported herein using ATR-FTIR spectroscopy combined with chemometric analyses. High-performance liquid chromatography (HPLC) quantified different chlorogenic acid isomer contents for reference, whereas ORAC, ABTS, and DPPH were used to determine the antioxidant activity of the same coffee bean extracts. FTIR spectral data and reference data of 42 coffee bean samples were processed to build optimized PLSR models, and 18 samples were used for external validation of constructed PLSR models. In total, six PLSR models were constructed for six chlorogenic acid isomers to predict content, with three PLSR models constructed to forecast the free radical scavenging activities, obtained using different chemical assays. In conclusion, FTIR spectroscopy, coupled with PLSR, serves as a reliable, nondestructive, and rapid analytical method to quantify chlorogenic acids and to assess different free radical-scavenging capacities in coffee beans.

  7. A multivariate approach using attenuated total reflectance mid-infrared spectroscopy to measure the surface mannoproteins and β-glucans of yeast cell walls during wine fermentations.

    Science.gov (United States)

    Moore, John P; Zhang, Song-Lei; Nieuwoudt, Hélène; Divol, Benoit; Trygg, Johan; Bauer, Florian F

    2015-11-18

    Yeast cells possess a cell wall comprising primarily glycoproteins, mannans, and glucan polymers. Several yeast phenotypes relevant for fermentation, wine processing, and wine quality are correlated with cell wall properties. To investigate the effect of wine fermentation on cell wall composition, a study was performed using mid-infrared (MIR) spectroscopy coupled with multivariate methods (i.e., PCA and OPLS-DA). A total of 40 yeast strains were evaluated, including Saccharomyces strains (laboratory and industrial) and non-Saccharomyces species. Cells were fermented in both synthetic MS300 and Chardonnay grape must to stationery phase, processed, and scanned in the MIR spectrum. PCA of the fingerprint spectral region showed distinct separation of Saccharomyces strains from non-Saccharomyces species; furthermore, industrial wine yeast strains separated from laboratory strains. PCA loading plots and the use of OPLS-DA to the data sets suggested that industrial strains were enriched with cell wall proteins (e.g., mannoproteins), whereas laboratory strains were composed mainly of mannan and glucan polymers.

  8. Determination of trans Fat in Selected Fast Food Products and Hydrogenated Fats of India Using Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) Spectroscopy.

    Science.gov (United States)

    Khan, Mohd Umar; Hassan, Mohammad Fahimul; Rauf, Abdul

    2017-01-01

    This paper reports the application of a simple and rapid method for the determination of trans fatty acid (TFA) content in some of the selected Indian fast food products and hydrogenated fats using Fourier transform infrared (FTIR) spectroscopy in conjunction with second derivative procedure. FTIR spectroscopy has been successfully applied to trans measurement using the absorbance bands at or near 966 cm(-1) in the FTIR spectra. It was found from the analysis that TFA content of fast food product was ranging from 1.57% to 3.83% of the total fat while for hydrogenated fats, comparatively large quantity of TFA was detected in the range of 3.31% to 4.73%. Since GC-FID is most widely used method for the determination of fatty acid (FA) composition, this method was used for the sake of comparison. Value of regression coefficient was found very close to one (0.99503) with standard deviation of 0.10247 showing a good agreement between GC-FID and proposed ATR-FTIR method.

  9. Attenuated total reflection far-ultraviolet spectroscopy

    Science.gov (United States)

    Ozaki, Yukihiro; Morisawa, Yusuke; Goto, Takeyoshi; Tanabe, Ichiro

    2016-09-01

    Recently, far-ultraviolet (FUV) spectroscopy of solid and liquid states has been a matter of keen interest because it provides new possibilities for studying electronic structures and transitions of almost all kinds of molecules. It has also great potential for a variety of applications from quantitative and qualitative analysis of aqueous solutions to environmental and geographical analyses. This review describes the state-of- the-art of FUV spectroscopy; an introduction to FUV spectroscopy, the development of FUV spectrometers, investigations on electronic transitions and structure, its various applications, and future prospects.

  10. 衰减全反射红外光谱法测定羟基硅油中的羟基含量%Determination of Hydroxyl Content in Hydroxyl Silicone Oil by Attenuated Total Reflection Infrared Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    程顺弟; 陈卫东; 刘雪梅; 吴云华

    2015-01-01

    The hydroxyl content of hydroxyl silicone oil by attenuated total reflection infrared spectroscopy was determined by attenuated total reflection-Fourier transform infrared spectrometry(ATR-FTIR), based on the Si—OH bonds characteristic absorption peak at around 3 280 cm-1 . Results showed that the hydroxyl con-tent of hydroxyl silicon oil and its infrared absorption peak absorbance was in good linear relationship in the range of 1 . 01% and 8 . 85%, with the correlation coefficient of 0 . 9996 . The relative standard deviations were less than 2% obtained by the precision experiment. The sample results were close to those analyzed by the re-action chromatography,the relative standard deviations were less than 5%. The method is simple, rapid and accurate. It is suitable for determining the hydroxyl content in hydroxyl silicone oil.%根据羟基硅油的红外光谱中Si—OH基在3280 cm-1附近的特征吸收峰的吸光度强度,建立了采用衰减全反射-傅里叶变换红外光谱法测定羟基硅油中羟基含量的方法。采用该方法时,羟基硅油的羟基质量分数在1.01%~8.85%范围内与其红外吸收峰吸光度有良好的线性,相关系数为0.9996;精密度实验的相对标准偏差均小于2%;样品分析结果与反应色谱法接近,相对误差不大于5%。本方法简便、快速,数据准确、可靠,适合于测定羟基硅油的羟基含量。

  11. Investigation of applicability of a mid-infrared spectroscopic method using an attenuated total reflection accessory and a new near-infrared transmission method for determination of faecal fat.

    Science.gov (United States)

    Volmer, M; Kingma, A W; Borsboom, P C; Wolthers, B G; Kema, I P

    2001-05-01

    In many laboratories, the titrimetric method of Van de Kamer is used for the analysis of faecal fat content of patients suspected of steatorrhoea. We investigated the applicability of a mid-infrared (MIR) spectroscopic method, using an attenuated total reflection (ATR) accessory, and a new near-infrared (NIR) spectroscopic method. For the NIR method, sealed plastic bags containing the stool samples were used as transmission cells. Standardization was obtained using a previously described MIR method, with a NaCl flow-cell, as reference method. Partial least-squares regression was used for the calibration of each method. Full cross-validation of the calibration set was used for the internal validation of each method. Fifteen per cent of the stool samples could not be estimated with the ATR method within reasonable accuracy limits compared with the reference. The standard error of prediction of the NIR method was 1.1 g/dL. We conclude that the new NIR method is a promising technique for routine use. However, further experiments need to be done with triplicate measurements of each sample and the use of an external validation set.

  12. Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy as a Forensic Method to Determine the Composition of Inks Used to Print the United States One-cent Blue Benjamin Franklin Postage Stamps of the 19th Century.

    Science.gov (United States)

    Brittain, Harry G

    2016-01-01

    Through the combined use of infrared (IR) absorption spectroscopy and attenuated total reflectance (ATR) sampling, the composition of inks used to print the many different types of one-cent Benjamin Franklin stamps of the 19th century has been established. This information permits a historical evaluation of the formulations used at various times, and also facilitates the differentiation of the various stamps from each other. In two instances, the ink composition permits the unambiguous identification of stamps whose appearance is identical, and which (until now) have only been differentiated through estimates of the degree of hardness or softness of the stamp paper, or through the presence or absence of a watermark in the paper. In these instances, the use of ATR Fourier transform infrared spectroscopy (FT-IR) spectroscopy effectively renders irrelevant two 100-year-old practices of stamp identification. Furthermore, since the use of ATR sampling makes it possible to obtain the spectrum of a stamp still attached to its cover, it is no longer necessary to identify these blue Franklin stamps using their cancellation dates.

  13. Feasibility study for the detection of Trichinella spiralis in a murine model using mid-Fourier transform infrared spectroscopy (MID-FTIR) with attenuated total reflectance (ATR) and soft independent modelling of class analogies (SIMCA).

    Science.gov (United States)

    Gómez-de Anda, Fabián; Gallardo-Velazquez, Tzayhri; Osorio-Revilla, Guillermo; Dorantes-Alvarez, Lidia; Calderon-Dominguez, Georgina; Nogueda-Torres, Benjamín; de-la-Rosa-Arana, Jorge-Luis

    2012-12-21

    Fourier transform infrared (FTIR) spectroscopy with attenuated total reflectance (ATR) and soft independent modelling by class analogies (SIMCA) was used to assess the feasibility of detecting Trichinella spiralis in a murine model. The selected FTIR wavenumber range was 1700-900 cm(-1) and the first derivative of the spectra was subjected to SIMCA analysis. The SIMCA model developed for rat meat spiked with T. spiralis larvae was successfully apply to classify non-infected from infected rat meat with a limit of detection of 3 larvae/10 g rat meat and no false positives with 99% confidence limit. To avoid false positives arising from the presence of other parasites, another chemometric model was developed to demonstrate the capacity of the model to discriminate between Ascaris suum, Taenia solium and T. spiralis. Results confirmed that this method could correctly distinguish these parasites. Additional studies are needed to prove the effectiveness of this technique for other types of muscle meats, including those relevant to human consumption.

  14. Determination of Trichinella spiralis in pig muscles using Mid-Fourier Transform Infrared Spectroscopy (MID-FTIR) with Attenuated Total Reflectance (ATR) and Soft Independent Modeling of Class Analogy (SIMCA).

    Science.gov (United States)

    Gómez-De-Anda, Fabián; Dorantes-Álvarez, Lidia; Gallardo-Velázquez, Tzayhri; Osorio-Revilla, Guillermo; Calderón-Domínguez, Georgina; Martínez Labat, Pablo; de-la-Rosa-Arana, Jorge-Luis

    2012-07-01

    The aim of this work was to study the feasibility of detection of Trichinella spiralis in swine meat using Middle Infrared Spectroscopy Fourier Transform with Attenuated Total Reflectance (ATR) and Soft Independent Modeling of Class Analogy (MID-FTIR-ATR-SIMCA). Five male Pigs were orally infected at different larvae concentrations (13,000, 6500, 3500, 1625, 812 larvae/pig) and after 24 weeks the animals were euthanized. Five types of muscles were studied (leg, loin, rib, masseter, and diaphragm). Results showed that MID-FTIR-ATR-SIMCA was useful to determine the presence of T. spiralis in the samples, as the interclass distance between infected and non infected muscles varied from 13.5 to 36.8. This technique was also useful to discriminate among pig muscles, where masseter showed the largest interclass distance, while rib presented the smallest one. In all cases the recognition and rejection rates were 100%, which means that the methodology is capable of accurately separating T. spiralis infected from non infected swine meat.

  15. Characterization of silver halide fiber optics and hollow silica waveguides for use in the construction of a mid-infrared attenuated total reflection fourier transform infrared (ATR FT-IR) spectroscopy probe.

    Science.gov (United States)

    Damin, Craig A; Sommer, André J

    2013-11-01

    Advances in fiber optic materials have allowed for the construction of fibers and waveguides capable of transmitting infrared radiation. An investigation of the transmission characteristics associated with two commonly used types of infrared-transmitting fibers/waveguides for prospective use in a fiber/waveguide-coupled attenuated total internal reflection (ATR) probe was performed. Characterization of silver halide polycrystalline fiber optics and hollow silica waveguides was done on the basis of the transmission of infrared light using a conventional fiber optic coupling accessory and an infrared microscope. Using the fiber optic coupling accessory, the average percent transmission for three silver halide fibers was 18.1 ± 6.1% relative to a benchtop reflection accessory. The average transmission for two hollow waveguides (HWGs) using the coupling accessory was 8.0 ± 0.3%. (Uncertainties in the relative percent transmission represent the standard deviations.) Reduced transmission observed for the HWGs was attributed to the high numerical aperture of the coupling accessory. Characterization of the fibers/waveguides using a zinc selenide lens objective on an infrared microscope indicated 24.1 ± 7.2% of the initial light input into the silver halide fibers was transmitted. Percent transmission obtained for the HWGs was 98.7 ± 0.1%. Increased transmission using the HWGs resulted from the absence or minimization of insertion and scattering losses due to the hollow air core and a better-matched numerical aperture. The effect of bending on the transmission characteristics of the fibers/waveguides was also investigated. Significant deviations in the transmission of infrared light by the solid-core silver halide fibers were observed for various bending angles. Percent transmission greater than 98% was consistently observed for the HWGs at the bending angles. The combined benefits of high percent transmission, reproducible instrument responses, and increased bending

  16. Total internal reflection spectroscopy for studying soft matter.

    Science.gov (United States)

    Woods, David A; Bain, Colin D

    2014-02-28

    Total internal reflection (TIR) spectroscopy is a widely used technique to study soft matter at interfaces. This tutorial review aims to provide researchers with an overview of the principles, experimental design and applications of TIR spectroscopy to enable them to understand how this class of techniques might be used in their research. It also highlights limitations and pitfalls of TIR techniques, which will assist readers in critically analysing the literature. Techniques covered include attenuated total reflection infrared spectroscopy (ATR-IR), TIR fluorescence, TIR Raman scattering and cavity-enhanced techniques. Other related techniques are briefly described.

  17. Direct determination of sorbitol and sodium glutamate by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) in the thermostabilizer employed in the production of yellow-fever vaccine.

    Science.gov (United States)

    de Castro, Eduardo da S G; Cassella, Ricardo J

    2016-05-15

    Reference methods for quality control of vaccines usually require treatment of the samples before analysis. These procedures are expensive, time-consuming, unhealthy and require careful manipulation of the sample, making them a potential source of analytical errors. This work proposes a novel method for the quality control of thermostabilizer samples of the yellow fever vaccine employing attenuated total reflectance Fourier transform infrared spectrometry (ATR-FTIR). The main advantage of the proposed method is the possibility of direct determination of the analytes (sodium glutamate and sorbitol) without any pretreatment of the samples. Operational parameters of the FTIR technique, such as the number of accumulated scans and nominal resolution, were evaluated. The best conditions for sodium glutamate were achieved when 64 scans were accumulated using a nominal resolution of 4 cm(-1). The measurements for sodium glutamate were performed at 1347 cm(-1) (baseline correction between 1322 and 1369 cm(-1)). In the case of sorbitol, the measurements were done at 890cm(-1) (baseline correction between 825 and 910 cm(-1)) using a nominal resolution of 2 cm(-1) with 32 accumulated scans. In both cases, the quantitative variable was the band height. Recovery tests were performed in order to evaluate the accuracy of the method and recovery percentages in the range 93-106% were obtained. Also, the methods were compared with reference methods and no statistical differences were observed. The limits of detection and quantification for sodium glutamate were 0.20 and 0.62% (m/v), respectively, whereas for sorbitol they were 1 and 3.3% (m/v), respectively.

  18. Effects of lanthanoid cations on the first electronic transition of liquid water studied using attenuated total reflection far-ultraviolet spectroscopy: ligand field splitting of lanthanoid hydrates in aqueous solutions.

    Science.gov (United States)

    Goto, Takeyoshi; Ikehata, Akifumi; Morisawa, Yusuke; Higashi, Noboru; Ozaki, Yukihiro

    2012-10-15

    The effects of the lanthanoid cations (Ln(3+)) on the first electronic transition (à ← X̃) of liquid water were studied from the attenuated total reflection far-ultraviolet (ATR-FUV) spectra of trivalent Ln(3+) electrolyte solutions (1 M), except Pm(3+). The à ← X̃ transition energies of the Ln(3+) electrolyte solutions show a distinct tetrad in their dependence on the number of 4f electrons of the Ln(3+) cations. For the half occupation period of the 4f electrons, the à ← X̃ transition energies decrease from La(3+) (4f(0), 8.0375 eV) to Nd(3+) (4f(3), 8.0277 eV) and increase from Sm(3+) (4f(5), 8.0279 eV) to Gd(3+) (4f(7), 8.0374 eV). For the complete occupation period, there are two local minima at Dy(3+) (4f(9), 8.0349 eV) and Yb(3+) (4f(13), 8.0355 eV). The à ← X̃ transition energies of the tetrad nodes (La(3+), Gd(3+), Ho(3+) (4f(10)), and Lu(3+) (4f(14))) increase slightly, as the nuclear charge increases in accordance with the hydration energies of the Ln(3+) cations. The energy difference (ΔE) between the à ← X̃ transition energies and the line between La(3+) and Lu(3+) is largest at Nd(3+) (80.5 cm(-1)) for the half occupation period and at Dy(3+) (26.1 cm(-1)) and Yb(3+) (24.5 cm(-1)) for the complete occupation period. The order of magnitude of ΔE is comparable to the ligand field splitting (LFS) of the ground state multiplets of Ln(3+) complexes. The observed tetrad trend of the à ← X̃ transition energies of the Ln(3+) electrolyte solutions across the 4f period reflects the hydration energies of the Ln(3+) cations and the LFS induced by water ligands.

  19. Total internal reflection ellipsometry: principles and applications.

    Science.gov (United States)

    Arwin, Hans; Poksinski, Michal; Johansen, Knut

    2004-05-20

    A concept for a measurement technique based on ellipsometry in conditions of total internal reflection is presented. When combined with surface plasmon resonance (SPR) effects, this technique becomes powerful for monitoring and analyzing adsorption and desorption on thin semitransparent metal films as well as for analyzing the semitransparent films themselves. We call this technique total internal reflection ellipsometry (TIRE). The theory of ellipsometry under total internal reflection combined with SPR is discussed for some simple cases. For more advanced cases and to prove the concept, simulations are performed with the Fresnel formalism. The use of TIRE is exemplified by applications in protein adsorption, corrosion monitoring, and adsorption from opaque liquids on metal surfaces. Simulations and experiments show greatly enhanced thin-film sensitivity compared with ordinary ellipsometry.

  20. Solution to causality paradox upon total reflection

    Institute of Scientific and Technical Information of China (English)

    LIU Xiang-min; CAO Zhuang-qi; ZHU Peng-fei; SHEN Qi-shun

    2006-01-01

    A dispute about the existence of an additional time (named as the Goos-H(a)nchen time) associated with the Goos-H(a)nchen shift in total reflection has recently arisen.At the same time,an inconsistency between the optical ray model and the electromagnetic theory also appears in the optical planar waveguide.By analyzing light propagation in an optical planar waveguide with both the zigzag-ray model and the electromagnetic theory,this paper shows that the Goos-H(a)nchen time really exists,and the total time delay upon total reflection upon an ideal nonabsorbing plasma mirror is the sum of the group-delay time and the Goos-H(a)nchen time.The causality paradox of total reflection of a TM wave upon an ideal nonabsorbing plasma mirror is also solved taking into consideration the negative Goos-H(a)nchen shift.Finally,the expression of the group velocity of the guided mode in optical planar waveguide was obtained,which clearly shows that the time delay upon total reflection is the sum of the group-delay time and the Goos-H(a)nchen time at given any time.

  1. Designing attenuators for total-body irradiation using virtual simulation.

    Science.gov (United States)

    Corns, R; Evans, M; Olivares, M; Dyke, L; Podgorsak, E B; Freeman, C R

    2000-01-01

    In total-body photon irradiation, the lungs are the most commonly shielded organ. Lung compensators are often designed by using high-energy portal films. Other organs, such as the kidneys and liver, are poorly visualized in portal films due to their unit-density composition. A computed tomography-based technique to design kidney and liver attenuators involves outlining these organs in a virtual simulation. The position and the shape of the attenuator are then determined from a digitally-reconstructed radiograph. Appropriate attenuator thickness is determined from measured transmission curves. This article provides a summary of this technique for total-body photon irradiation in a 4-MV photon beam.

  2. Total internal reflection laser tools and methods

    Energy Technology Data Exchange (ETDEWEB)

    Zediker, Mark S.; Faircloth, Brian O.; Kolachalam, Sharath K.; Grubb, Daryl L.

    2016-02-02

    There is provided high power laser tools and laser heads that utilize total internal reflection ("TIR") structures to direct the laser beam along a laser beam path within the TIR structure. The TIR structures may be a TIR prism having its hypotenuse as a TIR surface.

  3. DEVELOPEMENT OF A LIGHT ATTENUATOR BASED ON GLASSY REFLECTIONS

    Directory of Open Access Journals (Sweden)

    K. Ferria

    2015-07-01

    Full Text Available The light intensity control of a luminous source is a very important operation in many optical applications. Several types of light attenuator exploiting different optical phenomena like diffraction, absorption, and reflection exist and they differ principally in the maximum attenuation rate, the control range, the sensitivity and the spectral band. In the presented work, we have developed and designed a light attenuator based on the progressive decrease of the transmitted light intensity, when it undergoes multiple vitreous reflections across eight plates glasses arranged in a roof shape. Several tests were carried out using a laser light as a source. We have shown that the attenuation rate can be controlled by the choice of the incidence angle on the glasses slides, in addition we have confirmed, for the case of perpendicular polarization of the laser light, that the attenuation obeys to a linear function. The obtained results are very close to those predicted theoretically.

  4. Study on Detection Methods of Interstitial Fluid Glucose Concentration Based on Infrared Attenuated Total Reflection%基于红外ATR光谱的组织液中葡萄糖信息检测方法研究

    Institute of Scientific and Technical Information of China (English)

    孙长月; 曹玉珍; 余松林; 于海霞; 徐可欣; 栗大超

    2014-01-01

    Measuring the glucose concentrations in the interstitial fluid is currently the main method to achieve the continuous blood glucose monitoring .The MIR-ATR(Mid-infrared ,Attenuated Total Reflection)Spectroscopy has prominent advantage on the analysis of small biological molecule for composition information like the glucose ,but it is still an unresolved problem that how to detect the subcutaneous glucose concentration by using the MIR-ATR Spectroscopy .In the present paper ,we carry out the experiment based on MIR-ATR for the detection of subcutaneous glucose information on both the natural state and the pene-tration state based on the theoryanalysis of MIR penetration depth .Firstly ,collect spectral data of the subcutaneous glucose con-centration of human finger on the natural state were collected as the light shined the skin directly ,and it was discussed whether the MIR can penetrate the skin to get the information of subcutaneous glucose .On this basis ,collect spectral data of the subcu-taneous glucose concentration of human finger at the penetration state were collected when the Interstitial fluid is permeated to the surface layer by using low-frequency ultrasound and vacuum ,then it analyzed that whether it can detect the glucose-specific information or not .As the two-dimensional correlation spectroscopy has high resolution and good versatility ,it is widely used to analyze the inter-molecular reaction and judge the absorption peaks information in many fields including the M IR spectroscopy field ,so we choose the Two-dimensional correlation spectroscopy to analyze the information of subcutaneous glucose concentra-tion at the natural state and the penetration state .The experiment result shows that the MIR-ATR spectroscopy can’t be applied in the detection of subcutaneous glucose concentrationdirectly ,and it is a promising direction to make the Interstitial fluid perme-ated to the surface layer by the physical methods or chemical methods .%通过测量

  5. Partial internal reflections on total internal reflection fluorescent microscopy.

    Science.gov (United States)

    Simon, Sanford M

    2009-11-01

    Microscopy, especially fluorescence microscopy, has proven to be a powerful method for studying biological processes. Unfortunately, some of the same features that make biological membranes powerful (for example, all of the action taking place across a narrow 4nm film) also make it difficult to visualize by fluorescence. Over the past 30 years, numerous tricks have been developed to narrow the plane over which data is collected. One approach, total internal reflection (TIR) fluorescence microscopy, is particularly well suited for studying membrane events. A key issue to address when using TIR to tackle a new biological problem is: how can one judge whether the signals being observed are actually the biological phenomena that one wishes to study?

  6. Plasmonically amplified bioassay - Total internal reflection fluorescence vs. epifluorescence geometry.

    Science.gov (United States)

    Hageneder, Simone; Bauch, Martin; Dostalek, Jakub

    2016-08-15

    This paper investigates plasmonic amplification in two commonly used optical configurations for fluorescence readout of bioassays - epifluorescence (EPF) and total internal reflection fluorescence (TIRF). The plasmonic amplification in the EPF configuration was implemented by using crossed gold diffraction grating and Kretschmann geometry of attenuated total reflection method (ATR) was employed in the TIRF configuration. Identical assay, surface architecture for analyte capture, and optics for the excitation, collection and detection of emitted fluorescence light intensity were used in both TIRF and EPF configurations. Simulations predict that the crossed gold diffraction grating (EPF) can amplify the fluorescence signal by a factor of 10(2) by the combination of surface plasmon-enhanced excitation and directional surface plasmon-coupled emission in the red part of spectrum. This factor is about order of magnitude higher than that predicted for the Kretschmann geometry (TIRF) which only took advantage of the surface plasmon-enhanced excitation. When applied for the readout of sandwich interleukin 6 (IL-6) immunoassay, the plasmonically amplified EPF geometry designed for Alexa Fluor 647 labels offered 4-times higher fluorescence signal intensity compared to TIRF. Interestingly, both geometries allowed reaching the same detection limit of 0.4pM despite of the difference in the fluorescence signal enhancement. This is attributed to inherently lower background of fluorescence signal for TIRF geometry compared to that for EPF which compensates for the weaker fluorescence signal enhancement. The analysis of the inflammation biomarker IL-6 in serum at medically relevant concentrations and the utilization of plasmonic amplification for the fluorescence measurement of kinetics of surface affinity reactions are demonstrated for both EPF and TIRF readout.

  7. Questions Students Ask: What Causes Total Internal Reflection?

    Science.gov (United States)

    Giancoli, Douglas

    1983-01-01

    Provides a detailed, non-mathematical analysis of total internal reflection based on the interaction of light and matter and the principle of superposition. Discusses factors affecting the critical angle and the percent of the incident beam that is refracted and reflected. (JM)

  8. Chemical characterization of latent fingerprints by matrix-assisted laser desorption ionization, time-of-flight secondary ion mass spectrometry, mega electron volt secondary mass spectrometry, gas chromatography/mass spectrometry, X-ray photoelectron spectroscopy, and attenuated total reflection Fourier transform infrared spectroscopic imaging: an intercomparison.

    Science.gov (United States)

    Bailey, Melanie J; Bright, Nicholas J; Croxton, Ruth S; Francese, Simona; Ferguson, Leesa S; Hinder, Stephen; Jickells, Sue; Jones, Benjamin J; Jones, Brian N; Kazarian, Sergei G; Ojeda, Jesus J; Webb, Roger P; Wolstenholme, Rosalind; Bleay, Stephen

    2012-10-16

    The first analytical intercomparison of fingerprint residue using equivalent samples of latent fingerprint residue and characterized by a suite of relevant techniques is presented. This work has never been undertaken, presumably due to the perishable nature of fingerprint residue, the lack of fingerprint standards, and the intradonor variability, which impacts sample reproducibility. For the first time, time-of-flight secondary ion mass spectrometry, high-energy secondary ion mass spectrometry, and X-ray photoelectron spectroscopy are used to target endogenous compounds in fingerprints and a method is presented for establishing their relative abundance in fingerprint residue. Comparison of the newer techniques with the more established gas chromatography/mass spectrometry and attenuated total reflection Fourier transform infrared spectroscopic imaging shows good agreement between the methods, with each method detecting repeatable differences between the donors, with the exception of matrix-assisted laser desorption ionization, for which quantitative analysis has not yet been established. We further comment on the sensitivity, selectivity, and practicability of each of the methods for use in future police casework or academic research.

  9. Correction for partial reflection in ultrasonic attenuation measurements using contact transducers.

    Science.gov (United States)

    Treiber, Martin; Kim, Jin-Yeon; Jacobs, Laurence J; Qu, Jianmin

    2009-05-01

    This research investigates the influence of partial reflection on the measurement of the absolute ultrasonic attenuation coefficient using contact transducers. The partial, frequency-dependent reflection arises from the thin fluid-layer interface formed between the transducer and specimen surface. It is experimentally shown that neglecting this reflection effect leads to a significant overestimation in the measured attenuation coefficient. A systematic measurement procedure is proposed that simultaneously obtains the ultrasonic signals needed to calculate both the reflection coefficient of the interface and the attenuation coefficient, without disturbing the existing coupling conditions. The true attenuation coefficient includes a correction based on the measured reflection coefficient--this is called the reflection correction. It is shown that including the reflection correction also reduces the variation (random error) in the measured attenuation coefficient. The accuracy of the proposed method is demonstrated for a material with a known attenuation coefficient. The proposed method is then used to measure the high attenuation coefficient of a cement-based material.

  10. Dispersion Properties in Total Internal Reflective Photonic Crystal Fiber

    Institute of Scientific and Technical Information of China (English)

    WEN Hua; HAO Dong-shan

    2004-01-01

    The dispersion properties in the short wavelength region of total internal reflective photonic crystal fiber have been studied by using the models of the equivalent twin waveguide soliton coupling,effective refractive index, effective normalized frequency and dispersion management solitons. It is shown that the dispersion in the cladding waveguide of the total internal reflective photonic crystal fiber is a positive dispersion,and the dispersion of its core waveguide is a negative dispersion. The method of the compensated probing laser diffraction by the phase hole induced by the stationary pumping laser in the cladding waveguide enables the average dispersion value of the total internal reflective photonic crystal fiber to be close to zero and the zero dispersion point to shift to the short wavelength region.

  11. A low-reflection coaxial tunable attenuator based on zero refractive index metamaterial

    Science.gov (United States)

    Zhang, Kai-Lun; Hou, Zhi-Ling; Wang, Chan-Yuan; Kong, Ling-Bao; Bian, Xin-Ming

    2016-11-01

    In this paper, we design a low-reflection coaxial tunable attenuator with a maximum attenuation of -50 dB by use of zero refractive index metamaterial. Almost no reflection is observed from input port of the proposed structure, due to the easily accessible impedance matching derived from the use of zero refractive index metamaterial. The relationship between attenuation and the air gap width can be well described by an equivalent circuit model. Interestingly, the ratio of input to output voltage is linearly related to the gap width due to the eliminated fringing capacitance by zero-refraction metamaterial, which makes it easy to achieve accurate calibration of the proposed attenuator. The low reflection and linear relationships enable the proposed attenuator to hold promising potential for practical applications.

  12. Frustration of total internal reflection by a hidden nanowire

    Science.gov (United States)

    Frumin, Leonid; Nemykin, Anton; Shapiro, David

    2016-12-01

    A metallic wire embedded in the dielectric substrate leads to frustration of the total internal reflection at the interface between dielectric and free space. The scattering by a gold cylinder is studied in order to exploit the light for hidden objects optical diagnostics. The p-wave incidenting by the angle close to total reflection with the frequency near plasmonic resonance is treated by the modified boundary elements method. The magnetic and electric fields at the interface are calculated. The scattering diagrams are found in near and far field.

  13. Rapid Quantitative Analysis of Hydrocarbon Composition of Furfural Extract Oils Using Attenuated Total Reflection Infrared Spectroscopy%衰减全反射红外光谱法快速测定糠醛抽出油烃族组成含量方法研究

    Institute of Scientific and Technical Information of China (English)

    李娜; 徐晓轩; 袁洪福; 胡爱琴; 刘伟; 宋春风; 李效玉; 宋以常; 何启军; 刘莎

    2014-01-01

    A set of rapid analysis system for hydrocarbon composition of heavy oils was designed using attenuated total reflection FTIR spectrometer and chemometrics to determine the hydrocarbon composition of furfural extract oils .Sixty two extract oil samples were collected and their saturates and aromatics content data were determined according to the standard NB /SH/T0509-2010 ,then the total contents of resins plus asphaltenes were calculated by the subtraction method in the percentage of weight . Based on the partial least squares(PLS) ,calibration models for saturates ,aromatics ,and resin+asphaltene contents were estab-lished using attenuated total reflection FTIR spectroscopy ,with their SEC ,1.43% ,0.91% and 1.61% ,SEP ,1.56% ,1.24%and 1.81% ,respectively ,meeting the accuracy and repeatability required for the standard .Compared to the present standard method ,the efficiency of hydrocarbon composition analysis for furfural extract oils is significantly improved by the new method which is rapid and simple .The system could also be used for other heavy oil analysis ,with excellent extension and application foreground .%提出了一种衰减全反射红外光谱法快速测定糠醛抽出油烃族组成含量的方法,设计了一套重油烃族组成快速分析系统。实验收集了62个减压蜡油经糠醛精制后的抽出油样品,采用NB/SH/T0509-2010方法测定其饱和烃、芳烃含量,由差减法求得胶质和沥青质总含量。采用偏最小二乘法(PLS )分别建立了糠醛抽出油饱和烃、芳烃和胶质+沥青质含量的定量校正模型,其SEC分别为1.43%,0.91%和1.61%,SEP分别为1.56%,1.24%和1.81%,均小于NB/SH/T0509-2010方法规定的再现性误差,模型预测精密度小于标准方法的重复性误差要求。与现行标准方法相比,该方法速度快,操作简单,可显著提高糠醛抽出油烃族组成分析效率。该分析系统也可用于其他重油分析

  14. Study of Multi Total Reflection X-ray Fluorescence Spectrometer

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    A total reflection X-ray spectrometer was set up, in which Mo tube was used as excitation source, Zr with the thickness of 100 μm was as filter, and λ/20 glabrous silicon was as reflector, λ/100 glabrous silicon was as sample carrier.

  15. Rydberg and π-π* transitions in film surfaces of various kinds of nylons studied by attenuated total reflection far-ultraviolet spectroscopy and quantum chemical calculations: peak shifts in the spectra and their relation to nylon structure and hydrogen bondings.

    Science.gov (United States)

    Morisawa, Yusuke; Yasunaga, Manaka; Sato, Harumi; Fukuda, Ryoichi; Ehara, Masahiro; Ozaki, Yukihiro

    2014-10-09

    Attenuated total reflection far-ultraviolet (ATR-FUV) spectra in the 145-260 nm region were measured for surfaces (thickness 50-200 nm) of various kinds of nylons in cast films to explore their electronic transitions in the FUV region. ATR-FUV spectra show two major bands near 150 and 200 nm in the surface condensed phase of nylons. Transmittance (Tr) spectra were also observed in particular for the analysis of valence excitations. Time-dependent density functional theory (TD-DFT/CAM-B3LYP) calculations were carried out using the model systems to provide the definitive assignments of their absorption spectra and to elucidate their peak shifts in several nylons, in particular, focusing on their crystal alignment structures and intermolecular hydrogen bondings. Two major bands of nylon films near 150 and 200 nm are characterized as σ-Rydberg 3p and π-π* transitions of nylons, respectively. These assignments are also coherent with those of liquid n-alkanes (n = 5-14) and liquid amides observed previously. The Rydberg transitions are delocalized over the hydrocarbon chains, while the π-π* transitions are relatively localized at the amide group. Differences in the peak positions and intensity were found in both ATR- and Tr-FUV spectra for different nylons. A red-shift of the π-π* amide band in the FUV spectra of nylon-6 and nylon-6/6 models in α-form is attributed to the crystal structure pattern and the intermolecular hydrogen bondings, which result in the different delocalization character of the π-π* transitions and transition dipole coupling.

  16. Implementation of the phenomenon of total reflection for total reflection X-Ray fluorescence spectrometry technique simulation

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Marcio H. dos; Anjos, Marcelino J. dos; Oliveira, Luis F. de, E-mail: marciohsantos2010@gmail.com, E-mail: bmarcelin@uerj.br, E-mail: clfolive@uerj.br [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Programa de Pos-Graduacao em Fisica; Albuquerque, Marcelo P. de, E-mail: mpalbuquer@gmail.com [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil). Coordenacao de Atividades Tecnicas

    2015-07-01

    Within the scientific research field, X-ray fluorescence spectrometry is a basic technique for chemical analysis of materials, allowing recognition and study of the elemental nature of a particular sample. With this technique, the researcher uses different devices such as X-ray tubes, radioactive sources, monochromators crystals, capillaries, slits and waveguides, Si-Li detectors and scintillators. Furthermore, one can provide these elements with different arrangements in order to obtain a better configuration. One of the X-ray fluorescence spectrometry variants is the total reflection X-ray fluorescence spectrometry. It is based on the optical phenomenon of total reflection observed when a radiation beam impinges on a surface below a critical angle. Two important characteristics of this technique are to minimize the generation of background derived from the reflector support and allow the radiation interaction with very thin samples (thickness between 100 nm and 15 μm). The goal of the paper is to show the computational modeling of the physical phenomenon of total reflection that enables the implementation of total reflection X-ray fluorescence spectrometry technique through the simulator developed at Institute of Physics of the University of the State of Rio de Janeiro with parallel and distributed processing features. The simulator at hand is already available for implementation of energy dispersive X-ray fluorescence spectrometry. Through it, they are shown three simulations, each based on a particular apparatus: a set of reflectors, a capillary and a waveguide with lucite reflectors. (author)

  17. Total Internal Reflection for Effectively Transparent Solar Cell Contacts

    CERN Document Server

    Jahelka, Phillip; Atwater, Harry

    2016-01-01

    A new strategy for eliminating photocurrent losses due to the metal contacts on the front of a solar cell was proposed, simulated, and tested. By placing triangular cross-section lines of low refractive index on top of the contacts, total-internal reflection at the interface of the low-index triangles and the surrounding material can direct light away from the metal and into the photoactive absorber. Simulations indicated that losses can be eliminated for any incident angle, and that yearly energy production improvements commensurate with the metallized area are possible. Proof of principle experiments were carried out to eliminate the reflective losses of a commercial solar cell's busbar contact. Spatially resolved laser beam induced current measurements demonstrated that reflection losses due to the busbar were reduced by voids with triangular cross-section.

  18. Breakthroughs in Photonics 2014: Relaxed Total Internal Reflection

    CERN Document Server

    Jahani, Saman

    2015-01-01

    Total internal reflection (TIR) is a ubiquitous phenomenon used in photonic devices ranging from waveguides and resonators to lasers and optical sensors. Controlling this phenomenon and light confinement are keys to the future integration of nanoelectronics and nanophotonics on the same silicon platform. We introduced the concept of relaxed total internal reflection in 2014 to control evanescent waves generated during TIR. These unchecked evanescent waves are the fundamental reason photonic devices are inevitably diffraction-limited and cannot be miniaturized. Our key design concept is the engineered anisotropy of the medium into which the evanescent wave extends thus allowing for skin depth engineering without any metallic components. In this article, we give an overview of our approach and compare it to key classes of photonic devices such as plasmonic waveguides, photonic crystal waveguides and slot waveguides. We show how our work can overcome a long standing issue in photonics nanoscale light confinement...

  19. Total Internal Reflection Accounts for the Bright Color of the Saharan Silver Ant.

    Science.gov (United States)

    Willot, Quentin; Simonis, Priscilla; Vigneron, Jean-Pol; Aron, Serge

    2016-01-01

    The Saharan silver ant Cataglyphis bombycina is one of the terrestrial living organisms best adapted to tolerate high temperatures. It has recently been shown that the hairs covering the ant's dorsal body part are responsible for its silvery appearance. The hairs have a triangular cross-section with two corrugated surfaces allowing a high optical reflection in the visible and near-infrared (NIR) range of the spectrum while maximizing heat emissivity in the mid-infrared (MIR). Those two effects account for remarkable thermoregulatory properties, enabling the ant to maintain a lower thermal steady state and to cope with the high temperature of its natural habitat. In this paper, we further investigate how geometrical optical and high reflection properties account for the bright silver color of C. bombycina. Using optical ray-tracing models and attenuated total reflection (ATR) experiments, we show that, for a large range of incidence angles, total internal reflection (TIR) conditions are satisfied on the basal face of each hair for light entering and exiting through its upper faces. The reflection properties of the hairs are further enhanced by the presence of the corrugated surface, giving them an almost total specular reflectance for most incidence angles. We also show that hairs provide an almost 10-fold increase in light reflection, and we confirm experimentally that they are responsible for a lower internal body temperature under incident sunlight. Overall, this study improves our understanding of the optical mechanisms responsible for the silver color of C. bombycina and the remarkable thermoregulatory properties of the hair coat covering the ant's body.

  20. Attenuation and reflection of radio waves by a melting layer of precipitation

    NARCIS (Netherlands)

    Klaassen, W.

    1990-01-01

    Attenuation and reflection of a melting layer are calculated using a meteorological model. The model employs a new scheme for the calculation of the dielectric properties of melting ice particles with densities ranging from those of loose snow to hail, and a new scheme for calculating the melting ra

  1. Removal cross sections and total mass attenuation coefficients of fast neutrons and gamma rays for steel

    CERN Document Server

    Elsayed, A A

    2003-01-01

    The present work deals with the study of the attenuation properties and determination of the cross sections of fast neutrons and gamma rays for structure steel used in different applications in nuclear power plants, particle accelerators, research reactors and different radiation attenuation fields. Investigation has been performed by measuring the transmitted fast neutron and gamma ray spectra behind cylindrical samples of steel (rho=7.87 gem sup - sup 3) of different thicknesses. A reactor collimated beam and neutron - gamma spectrometer with stiblbene scintillator were used for measurements. The pluse shape disriminate technique based on zero cross over method was used to discriminate between neutron and gamma ray pulses. Effective removal cross-section (sigma sub R) and total mass attenuation coefficient (mu) of neureons and gamma rays have been achieved using the attenuation relations. Microscopic removal cross sections sigma sup 9 sup 8 and mass removal cross sections sigma sub R sub / subrho of fast ne...

  2. Absolute Position Total Internal Reflection Microscopy with an Optical Tweezer

    CERN Document Server

    Liu, Lulu; Rodriguez, Alejandro W; Capasso, Federico

    2014-01-01

    A non-invasive, in-situ calibration method for Total Internal Reflection Microscopy (TIRM) based on optical tweezing is presented which greatly expands the capabilities of this technique. We show that by making only simple modifications to the basic TIRM sensing setup and procedure, a probe particle's absolute position relative to a dielectric interface may be known with better than 10 nm precision out to a distance greater than 1 $\\mu$m from the surface. This represents an approximate 10x improvement in error and 3x improvement in measurement range over conventional TIRM methods. The technique's advantage is in the direct measurement of the probe particle's scattering intensity vs. height profile in-situ, rather than relying on calculations or inexact system analogs for calibration. To demonstrate the improved versatility of the TIRM method in terms of tunability, precision, and range, we show our results for the hindered near-wall diffusion coefficient for a spherical dielectric particle.

  3. 中红外、近红外和拉曼光谱法测定商品农药制剂中氰戊菊酯和马拉硫磷的含量%Quantitative Analysis of Content of Fenvalerate and Malathion in Agrochemicals by Near-infrared, Attenuated Total Reflectance Infrared and Raman Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    熊艳梅; 唐果; 段佳; 李春子; 闵顺耕

    2012-01-01

    The active ingredients such as fenvalerate and malathion in pesticides were determined by the methods of near-infrared, attenuated total reflectance infrared and Raman spectroscopy. The quantitative models were established by partial least squares method and optimized. The independent validation sets were used to evaluate the accuracy of models. The coefficients R2 of determination and SEP of the near-infrared spectroscopy model for fenvalerate and malathion were 0. 9981 and 0. 9994, 0. 082 and 0. 081, respectively. The R2 and SEP of mid-infrared spectroscopy were 0. 9946 and 0.9998, 0.082 and 0.081, respectively. Both accuracies of near-infrared spectroscopy and mid-infrared spectroscopy were similar. The,coefficients R2 of determination and SEP of Raman were 0. 9872 and 0. 9993, 0. 254 and 0. 317, respectively, which shows a lower accuracy compared to the other two methods. The result indicated that near-infrared, mid-Infrared and Raman spectroscopy can be applied to the rapid determination of the content of the active ingredients precisely. It is of great significance in the area of on-line determination in the enterprise and the rapid analysis of agrichemicals in the quality monitoring department.%利用近红外、中红外和拉曼光谱法定量分析了商品农药制剂中有效成分氰戊菊酯和马拉硫磷的含量.采用偏最小二乘法(Partial least squares,PLS)建立氰戊菊酯和马拉硫磷的定量模型并进行了优化,用独立检验集对模型适应性进行评价.近红外和中红外法测定氰戊菊酯、马拉硫磷定量模型的相关系数分别是0.9981,0.9994和0.9946,0.9998,外部验证集标准差分别是0.082,0081和0.092,0.075,两种方法的定量效果接近;拉曼法氰戊菊酯和马拉硫磷定量模型的相关系数分别为0.9872和0.9993,外部验证集标准差分别为0.254和0.317,预测精度不及近红外和中红外法高.MIR-ATR,NIR和Raman 3种方法均能满足现场检测农药质量的需要.

  4. Attenuation correction for the HRRT PET-scanner using transmission scatter correction and total variation regularization

    DEFF Research Database (Denmark)

    Keller, Sune H; Svarer, Claus; Sibomana, Merence

    2013-01-01

    scatter correction in the μ-map reconstruction and total variation filtering to the transmission processing. Results: Comparing MAP-TR and the new TXTV with gold standard CT-based attenuation correction, we found that TXTV has less bias as compared to MAP-TR. We also compared images acquired at the HRRT...

  5. Experimental Studies of Microwave Reflection and Attenuation by Plasmas Produced by Burning Chemicals in Atmosphere

    Institute of Scientific and Technical Information of China (English)

    YUAN Zhongcai; SHI Jiaming; WANG Jiachun

    2007-01-01

    A series of chemicals are designed and prepared.With the method of thermodynamics,the average electron densities of the plasmas generated by burning chemicals are calculated.The reflection and attenuation of the microwaves,in a frequency band of 2 GHz to 15 GHz,by the plasma are measured.The results of measurements indicate that the plasma can absorb the energies of the microwaves in a broad band and reflect them faintly.Moreover,theoretical discussion reveals that the electron-neutral collision is the major factor that results in the absorption in the wide band.By using Appleton equations,average collision frequencies and electron densities are calculated from the attenuations of microwaves.

  6. Exploiting total internal reflection geometry for efficient optical modulation of terahertz light

    Science.gov (United States)

    Liu, Xudong; Parrott, Edward P. J.; Ung, Benjamin S.-Y.; Pickwell-MacPherson, Emma

    2016-10-01

    Efficient methods to modulate terahertz (THz) light are essential for realizing rapid THz imaging and communication applications. Here we report a novel THz modulator which utilizes the evanescent wave in a total internal reflection setup coupled with a conductive interface to enhance the attenuation efficiency of THz light. This approach makes it possible to achieve close to 100% modulation with a small interface conductivity of 12 mS. The frequency dependence of this technique is linked to the optical properties of the materials: a material with close to frequency independent conductivity that is also controllable will result in an achromatic modulation response, and the device performance can be optimized further by tuning the internal reflection angle. In this work, we focus on applying the technique in the terahertz frequency range. Using an LED array with a pump intensity of 475 mW/cm2 to produce carriers in a silicon wafer, we have achieved a modulation depth of up to 99.9% in a broad frequency range of 0.1 THz-0.8 THz. The required pumping power for the generation of the required free carriers is low because the sheet conductivity needed is far less than required for traditional transmission techniques. Consequently, the device can be modulated by an LED making it a very practical, low cost, and scalable solution for THz modulation.

  7. Exploiting total internal reflection geometry for efficient optical modulation of terahertz light

    Directory of Open Access Journals (Sweden)

    Xudong Liu

    2016-10-01

    Full Text Available Efficient methods to modulate terahertz (THz light are essential for realizing rapid THz imaging and communication applications. Here we report a novel THz modulator which utilizes the evanescent wave in a total internal reflection setup coupled with a conductive interface to enhance the attenuation efficiency of THz light. This approach makes it possible to achieve close to 100% modulation with a small interface conductivity of 12 mS. The frequency dependence of this technique is linked to the optical properties of the materials: a material with close to frequency independent conductivity that is also controllable will result in an achromatic modulation response, and the device performance can be optimized further by tuning the internal reflection angle. In this work, we focus on applying the technique in the terahertz frequency range. Using an LED array with a pump intensity of 475 mW/cm2 to produce carriers in a silicon wafer, we have achieved a modulation depth of up to 99.9% in a broad frequency range of 0.1 THz–0.8 THz. The required pumping power for the generation of the required free carriers is low because the sheet conductivity needed is far less than required for traditional transmission techniques. Consequently, the device can be modulated by an LED making it a very practical, low cost, and scalable solution for THz modulation.

  8. Nanoscale contact line visualization based on total internal reflection fluorescence microscopy

    NARCIS (Netherlands)

    Franken, M.J.Z.; Poelma, C.; Westerweel, J.

    2013-01-01

    We describe a novel measurement method to study the contact line of a droplet at nanoscale level. The method is based on Total Internal Reflection Fluorescence Microscopy (TIRFM), which uses an evanescent excitation field produced by total internal reflection of light. The evanescent field depends o

  9. Visco-thermal effects in acoustic metamaterials: from total transmission to total reflection and high absorption

    CERN Document Server

    Molerón, Miguel; Daraio, Chiara

    2015-01-01

    We theoretically and experimentally investigate visco-thermal effects on the acoustic propagation through metamaterials consisting of rigid slabs with subwavelength slits embedded in air. We demonstrate that this unavoidable loss mechanism is not merely a refinement, but it plays a dominant role in the actual acoustic response of the structure. Specifically, in the case of very narrow slits, the visco-thermal losses avoid completely the excitation of Fabry-Perot resonances, leading to 100% reflection. This is exactly opposite to the perfect transmission predicted in the idealised lossless case. Moreover, for a wide range of geometrical parameters, there exists an optimum slit width at which the energy dissipated in the structure can be as high as 50%. This work provides a clear evidence that visco-thermal effects are necessary to describe realistically the acoustic response of locally resonant metamaterials.

  10. Rain Rate-Radar Reflectivity Relationship for Drop Size Distribution and Rain Attenuation Calculation of Ku Band Signals

    Directory of Open Access Journals (Sweden)

    Govardhani.Immadi

    2014-05-01

    Full Text Available With the increased demand for long distance Tele communication day by day, satellite communication system was developed. Satellite communications utilize L, C, Ku and Ka bands of frequency to fulfil all the requirements. Utilization of higher frequencies causes severe attenuation due to rain. Rain attenuation is noticeable for frequencies above 10ghz. Amount of attenuation depends on whether the operating wave length is comparable with rain drop diameter or not. In this paper the main focus is on drop size distribution using empirical methods, especially Marshall and Palmer distributions. Empirical methods deal with power law relation between the rain rate(mm/h and radar reflectivity(dBz. Finally it is discussed about the rain rate variation, radar reflectivity, drop size distribution, that is made for two rain events at K L University, Vijayawada on 4th September 2013 and on 18 th August 2013.

  11. The influence of spatial coherence on the Goos-Haenchen shift at total internal reflection

    Energy Technology Data Exchange (ETDEWEB)

    Wang Liqin; Wang Ligang; Zhu Shiyao [Department of Physics, Zhejiang University, Hangzhou, 310027 (China); Zubairy, M Suhail [Centre for Quantum Physics, COMSATS Institute of Information Technology, Islamabad (Pakistan)], E-mail: sxwlg@yahoo.com.cn

    2008-03-14

    In this paper, the influence of spatial coherence on the Goos-Haenchen (GH) shift at total internal reflection is theoretically investigated. Based on the theory of partial coherence, a general integral expression of the cross-spectral density is derived for a partially coherent beam reflected from an interface. Using numerical simulation, we find that the GH shift of the reflected beam greatly depends on the spatial coherence, and the GH shift is greatly reduced with a decrease in spatial coherence.

  12. Optical computation based on nonlinear total reflectional optical switch at the interface

    Indian Academy of Sciences (India)

    Jianqi Zhang; Huan Xu

    2009-03-01

    A new scheme of binary half adder and full adder is proposed. It realizes a kind of all-optical computation which is based on the polarization coding technique and the nonlinear total reflectional optical switches.

  13. A method based on reflection theory to test the attenuation performance of an absorption coat to 8mm waves

    Science.gov (United States)

    Wang, Xuanyu

    2016-09-01

    A testing method has been set up to evaluate the attenuation performance of an absorption coat to 8mm waves, which is based on a set of detecting system included by an 8mm wave emitter, a millimeter power meter, a point to point collimator and a reflecting plate. The power meter was aimed at the 8 mm wave emitter along the reflection optical path instead of the direction observation between incident and reflected millimeter wave. Some Al, Fe and aluminum alloy sample plates were made and painted by the dope which was complexed with chopped carbon fibers. A naked metal plate was first used to adjust the transmission path of the millimeter wave. Then the power meter was adjusted to phase locking after preheating, and the millimeter wave power was sampled as the background value. Then the other painted plates were tested under the same conditions. When the concentration of chopped carbon fibers is 0.5mg/ml and the thickness of the absorption coat is 0.5mm, the attenuation percentages of Al, Fe and aluminum alloy painted plates respectively is 54.29%, 58.31% and 41.12%. By the result, the reflection testing method may be widely used to measure the reflection capacity or attenuation performance of various surfaces to millimeter waves.

  14. Frustrated Total Internal Reflection: Resonant and Negative Goos-H\\"anchen Shifts in Microwave Regime

    CERN Document Server

    Qu, Min

    2010-01-01

    It is well-known that the variations of Goos-H\\"anchen shifts (GHSs) are closely associated with the enengy-flux provided by evanescent states in the case of total internal reflection. However, when the frustrated internal total reflection (FTIR) is realized with a Polymethyl Methacrylate (PMMA) double-prism system operated in the microwave frequency range of 8.2 GHz to 12.4 GHz, we observe that the GH shifts for the reflected beam show periodic resonances with varying the operation frequency or the air layer thickness, which is different from the variation of the corresponding reflected energy. Moreover, in another FTIR based system introduced by a composite absorptive material slab with a two-dimensional top layer of frequency selective surface (FSS), the GHSs for reflected beam are discovered as not only resonant but also negative with the incidence of transverse electric that is TE polarized.

  15. Quantitative Total and Diffuse Reflectance Laboratory Measurements for Remote, Standoff, and Point Sensing

    Energy Technology Data Exchange (ETDEWEB)

    Blake, Thomas A.; Johnson, Timothy J.; Tonkyn, Russell G.; Forland, Brenda M.; Myers, Tanya L.; Brauer, Carolyn S.; Su, Yin-Fong

    2014-06-10

    Methods for making total and diffuse directional/hemispherical reflectance measurements in the shortwave to longwave infrared using an integrating sphere are described. The sphere is a commercial, off-the-shelf optical device with its sample port at the bottom, which is essential for examining powdered samples without using a cover glass. The reflectance spectra of recently-developed National Institute of Standards and Technology (NIST, USA) infrared reflectance standards have been measured using the sphere. Reflectance spectra of other materials such as Spectralon and Infragold were also measured. The relative systematic error for the total reflectance measurements is estimated to be on the order of 3%, and random measurement error for multiple samples of each material is on the order of 0.5%.

  16. Reflective variable optical attenuators and fibre ring lasers for wavelength-division multiplexing systems

    Science.gov (United States)

    Liu, He Liang

    Wavelength division multiplexing (WDM) optical fibre system is an important enabling technology to fulfill the demands for bandwidth in the modern information age. The main objective of this project is to study novel devices with the potential to enhance the performance of WDM systems. In particular, a novel reflective variable optical attenuator (RVOA) used for dynamic gain equalization (DGE) and fibre lasers based on an entirely new type of erbium-doped fibres with ultrawide tuning range were investigated theoretically and experimentally. We proposed a new type of RVOA device which could be potentially integrated with arrayed waveguide grating (AWG) to reduce the cost of DGE substantially. Initially, fibre-based RVOAs, fabricated with optical fibre components such as fibre coupler and Faraday rotator mirror, were investigated theoretically and experimentally. Larger attenuation range up to 22 dB was realized for fibre coupler-based ROVA with a Faraday rotator mirror and its polarization-dependent loss is about 0.5 dB. Then polymeric waveguide-based RVOAs were investigated theoretically and experimentally. Using an epoxy Novolak resin as core material and an UV-cured resin (Norland's NOA61) as cladding material, a polymeric waveguide RVOA was successfully fabricated. The dynamic 15 dB attenuation range was achieved and the PDL was less than 0.2 dB. The measured insertion loss of the polymeric waveguide RVOA was too large (about 18 dB) and was mainly induced by coupling loss, material loss and poor alignment. In the second part of the study, fibre ring lasers with continuous wavelength tuning over wide wavelength range and fibre ring lasers with discrete wavelength tuning were investigated. Tunable lasers are important devices in WDM systems because they could be employed as reserved sources and therefore avoiding the need to stock large inventory of lasers to cover the ITU-wavelength grid. In this project, erbium ions doped bismuth oxide glass fibres instead of

  17. Monte Carlo simulation applied in total reflection x-ray fluorescence: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Meira, Luiza L. C.; Inocente, Guilherme F.; Vieira, Leticia D.; Mesa, Joel [Departamento de Fisica e Biofisica - Instituto de Biociencias de Botucatu, Universidade Estadual Paulista Julio de Mesquita Filho (Brazil)

    2013-05-06

    The X-ray Fluorescence (XRF) analysis is a technique for the qualitative and quantitative determination of chemical constituents in a sample. This method is based on detection of the characteristic radiation intensities emitted by the elements of the sample, when properly excited. A variant of this technique is the Total Reflection X-ray Fluorescence (TXRF) that utilizes electromagnetic radiation as excitation source. In total reflection of X-ray, the angle of refraction of the incident beam tends to zero and the refracted beam is tangent to the sample support interface. Thus, there is a minimum angle of incidence at which no refracted beam exists and all incident radiation undergoes total reflection. In this study, we evaluated the influence of the energy variation of the beam of incident x-rays, using the MCNPX code (Monte Carlo NParticle) based on Monte Carlo method.

  18. Analysis of archaeological ceramics by total-reflection X-ray fluorescence: Quantitative approaches

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Ruiz, R. [Servicio Interdepartamental de Investigacion, Facultad de Ciencias, Universidad Autonoma de Madrid, Modulo C-9, Laboratorio de TXRF, Crta. Colmenar, Km 15, Cantoblanco, E-28049, Madrid (Spain)], E-mail: ramon.fernandez@uam.es; Garcia-Heras, M. [Grupo de Arqueometria de Vidrios y Materiales Ceramicos, Instituto de Historia, Centro de Ciencias Humanas y Sociales, CSIC, C/ Albasanz, 26-28, 28037 Madrid (Spain)

    2008-09-15

    This paper reports the quantitative methodologies developed for the compositional characterization of archaeological ceramics by total-reflection X-ray fluorescence at two levels. A first quantitative level which comprises an acid leaching procedure, and a second selective level, which seeks to increase the number of detectable elements by eliminating the iron present in the acid leaching procedure. Total-reflection X-ray fluorescence spectrometry has been compared, at a quantitative level, with Instrumental Neutron Activation Analysis in order to test its applicability to the study of this kind of materials. The combination of a solid chemical homogenization procedure previously reported with the quantitative methodologies here presented allows the total-reflection X-ray fluorescence to analyze 29 elements with acceptable analytical recoveries and accuracies.

  19. Determination of cholesterol concentration in human milk samples using attenuated total reflectance Fourier transform infrared spectroscopy

    Science.gov (United States)

    Kamelska, A. M.; Pietrzak-Fiećko, R.; Bryl, K.

    2013-03-01

    Results of an inexpensive and rapid evaluation of the cholesterol concentration in human milk using ATR-FTIR techniques are presented. The FTIR spectrum of pure cholesterol was characterized and quantitatively estimated in the region between 2800 and 3200 cm-1. 125 samples at different stages of lactation were analyzed. There were no differences between the cholesterol concentrations in the samples of early (1-3 months), medium (4-6 months), and late (> 6 months) lactation stages ( p = 0.096968). The cholesterol concentration ranged from 4.30 to 21.77 mg/100 cm3. Such a broad range was due to the differences between the samples from different women ( p = 0.000184). The results indicate that ATR-FTIR has potential for rapid estimation of cholesterol concentration in human milk.

  20. An Attenuated Total Reflectance Sensor for Copper: An Experiment for Analytical or Physical Chemistry

    Science.gov (United States)

    Shtoyko, Tanya; Zudans, Imants; Seliskar, Carl J.; Heineman, William R.; Richardson, John N.

    2004-01-01

    A sensor experiment which can be applied to advanced undergraduate laboratory course in physical or analytical chemistry is described along with certain concepts like the demonstration of chemical sensing, preparation of thin films on a substrate, microtitration, optical determination of complex ion stoichiometry and isosbestic point. It is seen…

  1. Detection of Citrus Huanglongbing by Fourier Transform Infrared-Attenuated Total Reflection (FTIR-ATR) Spectroscopy

    Science.gov (United States)

    Citrus Huanglongbing (HLB, also known as citrus greening disease) was discovered in Florida in 2005 and is spreading rapidly amongst the citrus growing regions of the state. Detection via visual symptoms of the disease is not a long term viable option. New techniques are being developed to test fo...

  2. Correcting attenuated total reflection-fourier transform infrared spectra for water vapor and carbon dioxide

    DEFF Research Database (Denmark)

    Bruun, Susanne Wrang; Kohler, Achim; Adt, Isabelle

    2006-01-01

    Fourier transform infrared (FT-IR) spectroscopy is a valuable technique for characterization of biological samples, providing a detailed fingerprint of the major chemical constituents. However, water vapor and CO(2) in the beam path often cause interferences in the spectra, which can hamper...... an absorption band from either water vapor or CO(2). From two calibration data sets, gas model spectra were estimated in each of the four spectral regions, and these model spectra were applied for correction of gas absorptions in two independent test sets (spectra of aqueous solutions and a yeast biofilm (C...

  3. Total reflection and cloaking by zero index metamaterials loaded with rectangular dielectric defects

    KAUST Repository

    Wu, Ying

    2013-05-06

    In this work, we investigate wave transmission property through a zero index metamaterial (ZIM) waveguide embedded with rectangular dielectric defects. We show that total reflection and total transmission (cloaking) can be achieved by adjusting the geometric sizes and/or permittivities of the defects. Our work provides another possibility of manipulating wave propagation through ZIM in addition to the widely studied dielectric defects with cylindrical geometries.

  4. Resonant tunneling effect in one-dimensional twinned lattice photonic crystal under total reflection conditions

    Science.gov (United States)

    Feng, Xi; Li, Hu; Yuxia, Tang

    2016-07-01

    Under total reflection conditions, it typically seems as though light waves will be reflected completely on the interface; in actuality, the waves can penetrate the medium as evanescent waves. In this paper, we present a twinned lattice photonic crystal with a unit cell composed of AB layers and their mirror. We assume that the refractive index n 0 of the input and output end is equal to n B and larger than n A . We first demonstrate the dependence of band structure on the incidence angle and normalized wavelength, in which the resonant tunneling bands are exposed. We then draw a comparison of bands between ABBA and AB. To conclude, we discuss the resonant tunneling effect in the twinned lattice photonic crystal under the total reflection conditions. As incidence angle increases, the resonant tunneling band ultimately vanishes completely.

  5. Nondestructive Determination of Total Chlorophyll Content in Maize Using Three-Wavelength Diffuse Reflectance

    Science.gov (United States)

    Gu, D.-D.; Wang, W.-Z.; Hu, J.-D.; Zhang, X.-M.; Wang, J.-B.; Wang, B.-S.

    2016-09-01

    Chlorophyll in leaves plays a vital role in plant growth and can be used as an indicator of a plant's nutritional status. In this paper, an experimental setup for measuring total chlorophyll content using three-wavelength diffuse reflectance is proposed, for which light-emitting diodes with peak wavelengths of 640, 660, and 940 nm are used. Two different maize strains, Zhengdan-958 and Xundan-20, fertilized at different levels before the jointing stage, were used to validate this setup. Regression analyses between remission function values of diffuse reflectance and SPAD values, as well as remission function values of diffuse reflectance and the actual total chlorophyll content, were performed. The determination coefficients between remission function values and the actual total chlorophyll content were 0.9766 for Zhengdan-958 leaves and 0.9612 for Xundan-20 leaves. The experimental results validated the feasibility of using the diffuse reflectance spectrum to determine the total chlorophyll content. This paper also provides guidance for the development of a portable instrument to determine the actual chlorophyll content.

  6. Optical Waveguide Switches Employing Total-Internal-Reflection (TIR) Effect (Invited Paper)

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In this paper, our recent research work on the total-internal-reflection optical switch is presented. The thermo-optic effect of polymeric materials and the photon-induced carrier effect of GaAlAs/GaAs are used in our devices.

  7. MONTE CARLO CALCULATION FOR CALIBRATION FUNCTIONS IN TOTAL REFLECTION X—RAY FLUORESCENCE SPECTROMETRY

    Institute of Scientific and Technical Information of China (English)

    范钦敏; 刘亚雯; 等

    1995-01-01

    Simulation approach includes such processes as photon emissions from X-ray tube with a spectral distribution,total reflection on the sample support,photoelectric effect in thin layer sample,as well as characteristic line absorption and detection,The calculation results are in agreement with experimental ones.

  8. Energy flux and Goos-Hänchen shift in frustrated total internal reflection.

    Science.gov (United States)

    Chen, Xi; Lu, Xiao-Jing; Zhao, Pei-Liang; Zhu, Qi-Biao

    2012-05-01

    Using Yasumoto and Õishi's energy flux method, a generalized analytical formulation for analyzing the Goos-Hänchen (GH) shift in frustrated total internal reflection is provided, from which the GH shift given by Artman's stationary phase method is shown to equal the GH calculated by Renard's conventional energy flux method plus a self-interference shift. The self-interference shift, originating from the interference between the incident and reflected beams, sheds light on the asymptotic behavior of the GH shift in such optical tunneling process in term of energy flux.

  9. Application of the Total Reflection X-ray Fluorescence technique to trace elements determination in tobacco

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, T. [National University of Mexico, Faculty of Chemistry, Building D, CU (O4510) Mexico, D.F. Mexico (Mexico)], E-mail: tmc@servidor.unam.mx; Lartigue, J. [National University of Mexico, Faculty of Chemistry, Building D, CU (O4510) Mexico, D.F. Mexico (Mexico); Zarazua, G.; Avila-Perez, P. [National Institute of Nuclear Research. Carr. Mexico-Toluca Km 36.5, (52045) Salazar, Ocoyoacac, Edo. de Mexico (Mexico); Navarrete, M. [National University of Mexico, Faculty of Chemistry, Building D, CU (O4510) Mexico, D.F. Mexico (Mexico); Tejeda, S. [National Institute of Nuclear Research. Carr. Mexico-Toluca Km 36.5, (52045) Salazar, Ocoyoacac, Edo. de Mexico (Mexico)

    2008-12-15

    Many studies have identified an important number of toxic elements along with organic carcinogen molecules and radioactive isotopes in tobacco. In this work we have analyzed by Total Reflection X-Ray Fluorescence 9 brands of cigarettes being manufactured and distributed in the Mexican market. Two National Institute of Standards and Technology standards and a blank were equally treated at the same time. Results show the presence of some toxic elements such as Pb and Ni. These results are compared with available data for some foreign brands, while their implications for health are discussed. It can be confirmed that the Total Reflection X-Ray Fluorescence method provides precise (reproducible) and accuracy (trueness) data for 15 elements concentration in tobacco samples.

  10. Thin-Film Enhanced Goos-H(a)nchen Shift in Total Internal Reflection

    Institute of Scientific and Technical Information of China (English)

    LI Chun-Fang; YANG Xiao-Yan

    2004-01-01

    @@ It is reported that the Goos-Hanchen (GH) shift of both TE and TM light beams totally reflected from a dielectric interface can be greatly enhanced by a dielectric thin film without changing the property of total internal reflection.Numerical simulations confirm the theoretical analysis and show that the enhanced GH shift can be as large as the width of the beam for beam's width up to 820 times of the wavelength. This may stimulate investigations in other areas of physics and may lead to interesting applications in optical devices. The enhancement of the GH shift is accompanied by the enhancement of the intensity of the decaying field in the optically thin medium and of the propagating field inside the film.

  11. Efficient optical path folding by using multiple total internal reflections in a microcavity

    CERN Document Server

    Shinohara, Susumu; Fukushima, Takehiro; Harayama, Takahisa; Arai, Kenichi; Yoshimura, Kazuyuki

    2014-01-01

    We propose using an asymmetric resonant microcavity for the efficient generation of an optical path that is much longer than the diameter of the cavity. The path is formed along a star polygonal periodic orbit within the cavity, which is stable and confined by total internal reflection. We fabricated a semiconductor device based on this idea with an average diameter of 0.3 mm, and achieved a path length of 2.79 mm experimentally.

  12. A Spectrometric Setup for Synchronous Total Internal Reflection Fluorescence Measurement at the Solid/Liquid Interface

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A spectrometric setup to perform total internal reflection fluorescence (TIRF) and synchronous TIRF measurements at solid/liquid interfaces is presented. The combination of TIRF and synchronous fluorescence was proposed to analyze simultaneously different components at interfaces. The TIRF excitation, emission and synchronous spectra of a water-soluble porphyrin were obtained from water/glass interface using this setup without the existence of a surfactant.

  13. Total internal reflection optical switch using the reverse breakdown of a pn junction in silicon.

    Science.gov (United States)

    Kim, Jong-Hun; Park, Hyo-Hoon

    2015-11-01

    We demonstrate a new type of silicon total-internal-reflection optical switch with a simple pn junction functioning both as a reflector and a heater. The reflector is placed between asymmetrically y-branched multimode waveguides with an inclination angle corresponding to half of the branch angle. When the reflector is at rest, incident light is reflected in accordance to the refractive index difference due to the plasma dispersion effect of the pre-doped carriers. Switching to the transmission state is attained under a reverse breakdown of the pn junction by the thermo-optic effect which smears the refractive index difference. From this switching scheme, we confirmed the switching operation with a shallow total-internal-reflection region of 1 μm width. At a 6° branch angle, an extinction ratio of 12 dB and an insertion loss of -4.2  dB are achieved along with a thermal heating power of 151.5 mW.

  14. Total-internal-reflection-based photomask for large-area photolithography

    Science.gov (United States)

    Hung, Shao-Kang; Lin, Kung-Hsuan; Chen, Cheng-Lung; Chou, Chen-Hsun; Lin, You-Chuan

    2016-05-01

    Photolithography has been widely implemented with a photomask in contact or in close proximity to the photoresist layer. The flatness of the substrates is a crucial factor to guarantee the quality of the entire patterned photoresist (PR) layer especially for large-area photolithography. However, some substrates, such as sapphire wafers, do not possess highly uniform thickness as silicon wafer does. In this work, we demonstrate that a flexible polydimethylsiloxane (PDMS) photomask with optical total-internal-reflection structure can effectively circumvent this problem for mass production. Different from conventional photomask that the light is blocked by the patterned reflective/absorbing materials, the distributions of light intensity on the PR is engineered by the geometric structure of the transparent PDMS photomask. We demonstrate that 4 in. patterned sapphire wafers can be successfully fabricated by using this PDMS photomask, which can be easily integrated into the present techniques in industry for mass production of substrates for GaN-based optoelectronic devices.

  15. Determination of total mass attenuation coefficients, effective atomic numbers and electron densities for different shielding materials used in radiation protection

    Energy Technology Data Exchange (ETDEWEB)

    Almeida J, A. T. [FUNDACENTRO, Centro Regional de Minas Gerais, Brazilian Institute for Safety and Health at Work, Belo Horizonte, 30180-100 Minas Gerais (Brazil); Nogueira, M. S. [Center of Development of Nuclear Technology / CNEN, Av. Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte, Minas Gerais (Brazil); Santos, M. A. P., E-mail: mnogue@cdtn.br [Regional Center for Nuclear Science / CNEN, 50.740-540 Recife, Pernambuco (Brazil)

    2015-10-15

    Full text: In this paper, the interaction of X-rays with some shielding materials has been studied for materials containing different amounts of barite and aggregates. The total mass attenuation coefficient (μ{sub t}) for three shielding materials has been calculated by using WinXCOM program in the energy range from RQR qualities (RQR-4, RQR-6, RQR-9, and RQR-10). They were: cream barite (density 2.99 g/cm{sup 3} collected in the State of Sao Paulo), purple barite (density 2.95 g/cm{sup 3} collected in the State of Bahia) and white barite (density 3.10 g/cm{sup 3} collected in the State of Paraiba). The chemical analysis was carried out by an X-ray fluorescence spectrometer model EDX-720, through dispersive energy. The six elements of the higher concentration found in the sample and analyzed by Spectrophotometry of Energy Dispersive X-ray for the samples were Ba(60.9% - white barite), Ca(17,92% - cream barite), Ce(3,60% - white barite), Fe(17,16% - purple barite), S(12,11% - white barite) and Si(29,61% - purple barite). Also, the effective atomic number (Z{sub eff}) and the effective electron density (N{sub eff}) were calculated using the values of the total mass attenuation coefficient. The dependence of these parameters on the incident photon energy and the chemical composition has been examined. (Author)

  16. Wave reflection in a reaction-diffusion system: breathing patterns and attenuation of the echo.

    Science.gov (United States)

    Tsyganov, M A; Ivanitsky, G R; Zemskov, E P

    2014-05-01

    Formation and interaction of the one-dimensional excitation waves in a reaction-diffusion system with the piecewise linear reaction functions of the Tonnelier-Gerstner type are studied. We show that there exists a parameter region where the established regime of wave propagation depends on initial conditions. Wave phenomena with a complex behavior are found: (i) the reflection of waves at a growing distance (the remote reflection) upon their collision with each other or with no-flux boundaries and (ii) the periodic transformation of waves with the jumping from one regime of wave propagation to another (the periodic trigger wave).

  17. Microplate-compatible total internal reflection fluorescence microscopy for receptor pharmacology

    Science.gov (United States)

    Chen, Minghan; Zaytseva, Natalya V.; Wu, Qi; Li, Min; Fang, Ye

    2013-05-01

    We report the use of total internal reflection fluorescence (TIRF) microscopy for analyzing receptor pharmacology and the development of a microplate-compatible TIRF imaging system. Using stably expressed green fluorescence protein tagged β2-adrenergic receptor as the reporter, we found that the activation of different receptors results in distinct kinetic signatures of the TIRF intensity of cells. These TIRF signatures closely resemble the characteristics of their respective label-free dynamic mass redistribution signals in the same cells. This suggests that TIRF in microplate can be used for profiling and screening drugs.

  18. Generation of nearly 3D-unpolarized evanescent optical near fields using total internal reflection.

    Science.gov (United States)

    Hassinen, Timo; Popov, Sergei; Friberg, Ari T; Setälä, Tero

    2016-07-01

    We analyze the time-domain partial polarization of optical fields composed of two evanescent waves created in total internal reflection by random electromagnetic beams with orthogonal planes of incidence. We show that such a two-beam configuration enables to generate nearly unpolarized, genuine three-component (3D) near fields. This result complements earlier studies on spectral polarization, which state that at least three symmetrically propagating beams are required to produce a 3D-unpolarized near field. The degree of polarization of the near field can be controlled by adjusting the polarization states and mutual correlation of the incident beams.

  19. Synchrotron total reflection X-ray fluorescence at BL-16 microfocus beamline of Indus-2

    Science.gov (United States)

    Tiwari, M. K.; Singh, A. K.; Das, Gangadhar; Chowdhury, Anupam; Lodha, G. S.

    2014-04-01

    Determination of ultra trace elements is important in many disciplines both in basic and applied sciences. Numerous applications show their importance in medical science, environmental science, materials science, food processing and semiconductor industries and in maintaining the quality control of ultra pure chemicals and reagents. We report commissioning of a synchrotron based total reflection x-ray fluorescence (TXRF) facility on the BL-16 microfocus beamline of Indus-2. This paper describes the performance of the BL-16 TXRF spectrometer and the detailed description of its capabilities through examples of measured results.

  20. First Total Reflection X-Ray Fluorescence round-robin test of water samples: Preliminary results

    Science.gov (United States)

    Borgese, Laura; Bilo, Fabjola; Tsuji, Kouichi; Fernández-Ruiz, Ramón; Margui, Eva; Streli, Christina; Pepponi, Giancarlo; Stosnach, Hagen; Yamada, Takashi; Vandenabeele, Peter; Maina, David M.; Gatari, Michael; Shepherd, Keith D.; Towett, Erick K.; Bennun, Leonardo; Custo, Graciela; Vasquez, Cristina; Depero, Laura E.

    2014-11-01

    Total Reflection X-Ray Fluorescence (TXRF) is a mature technique to evaluate quantitatively the elemental composition of liquid samples deposited on clean and well polished reflectors. In this paper the results of the first worldwide TXRF round-robin test of water samples, involving 18 laboratories in 10 countries are presented and discussed. The test was performed within the framework of the VAMAS project, interlaboratory comparison of TXRF spectroscopy for environmental analysis, whose aim is to develop guidelines and a standard methodology for biological and environmental analysis by means of the TXRF analytical technique.

  1. Picoliter solution deposition for total reflection X-ray fluorescence analysis of semiconductor samples

    Energy Technology Data Exchange (ETDEWEB)

    Sparks, Chris M., E-mail: chris.sparks@svtc.co [Analytical Services, SVTC Technologies, Austin, TX 78741 (United States); Fittschen, Ursula E.A. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Institute of Inorganic and Applied Chemistry, University of Hamburg, 20146 Hamburg (Germany); Havrilla, George J. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2010-09-15

    A deposition system capable of delivering picoliter quantities of solution in programmable arrays was investigated as a method for sample preparation for total reflection X-ray fluorescence (TXRF) spectroscopy. Arrays of trace metals in solution were deposited on Si wafers. The array deposits provide a capability of depositing closely spaced (100 {mu}m or less), typically 5-20 {mu}m diameter droplets in an area that can be matched to the analysis spot of the TXRF detector. The dried depositions were physically characterized and the effect of deposition type and matrix on the TXRF signal was investigated.

  2. Energy Flux and Density of Nonuniform Electromagnetic Waves with Total Reflection

    Science.gov (United States)

    Petrov, N. S.

    2014-07-01

    Analytic expressions are obtained for the energy flux and density of refracted nonuniform waves produced during total reflection at the boundary between two isotropic media for the general case of elliptically polarized incident light. The average values are determined as functions of the parameters of the adjoining media and the angle of incidence. The cases of linearly and circularly polarized incident waves are examined in detail. An explicit general expression relating the energy fl ux and density of these waves for arbitrarily polarized incident light is obtained.

  3. Superluminal Energy Transmission in the Goos-Hanchen Shift of Total Reflection

    CERN Document Server

    Wang, Z Y

    2011-01-01

    This paper is to give a counter example for the theory of relativity. Firstly, the dispersion relation of surface electromagnetic waves is corresponding to that of a tachyon where the coefficient of proportionality is the squared Planck constant. Then we prove the energy flow velocity S/w of the Goos-Hanchen shift in vacuum is cn.sinI>c as well according to electrodynamics. These two different ways lead to a same conclusion that energy transport in the Goos-Hanchen effect of total reflection is faster than light. It is also helpful to study the tachyon of particle physics and superluminal motion observed in astronomy,etc.

  4. Superluminal energy transmission in the Goos-Hanchen shift of total reflection

    Science.gov (United States)

    Wang, Zhong-Yue

    2011-04-01

    The dispersion relation ω2 = β2c2 - τ2c2 of surface electromagnetic waves is corresponding to that E2 = p2c2 - m02c4 of a tachyon where the coefficient of proportionality is the squared Planck constant ℏ2. Then we prove the energy flow velocity of the Goos-Hanchen shift in vacuum is cn sin θi > c as well according to electrodynamics. These two different ways lead to a same conclusion that energy transport in the Goos-Hanchen effect of total reflection is faster than light.

  5. Total reflection coefficients of low-energy photons presented as universal functions

    Directory of Open Access Journals (Sweden)

    Ljubenov Vladan

    2010-01-01

    Full Text Available The possibility of expressing the total particle and energy reflection coefficients of low-energy photons in the form of universal functions valid for different shielding materials is investigated in this paper. The analysis is based on the results of Monte Carlo simulations of photon reflection by using MCNP, FOTELP, and PENELOPE codes. The normal incidence of the narrow monoenergetic photon beam of the unit intensity and of initial energies from 20 keV up to 100 keV is considered, and particle and energy reflection coefficients from the plane homogenous targets of water, aluminum, and iron are determined and compared. The representations of albedo coefficients on the initial photon energy, on the probability of large-angle photon scattering, and on the mean number of photon scatterings are examined. It is found out that only the rescaled albedo coefficients dependent on the mean number of photon scatterings have the form of universal functions and these functions are determined by applying the least square method.

  6. Nanoscale contact line visualization based on Total Internal Reflection Fluorescence Microscopy.

    Science.gov (United States)

    Franken, M J Z; Poelma, C; Westerweel, J

    2013-11-04

    We describe a novel measurement method to study the contact line of a droplet at nanoscale level. The method is based on Total Internal Reflection Fluorescence Microscopy (TIRFM), which uses an evanescent excitation field produced by total internal reflection of light. The evanescent field depends on the angle of the incident light and has an exponential intensity decay, characterized by the penetration depth. The penetration depth is determined by imaging a fluorescent particle probe that is traversed using an Atomic Force Microscopy (AFM) setup. The result confirms the exponential behavior of the evanescent field intensity, and the value of the penetration depth also corresponds with the value predicted based on the optical configuration. By using the intensity distribution of a fluorescent dye and the value for the penetration depth of the evanescent wave, it is possible to reconstruct the interface of a partial wetting droplet. The reconstructed interface based on TIRFM is in good agreement with the interface obtained from two reference measurements: non-disturbing AFM-imaging and conventional contact angle measurement. The latter lacks spatial resolution, while the former is limited to particular droplets. This new non-contact measurement does not suffer from these drawbacks, making it a very useful tool to study the fundamental wetting behavior of both stationary and dynamic interfaces.

  7. Direct analysis of biological samples by total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Lue M, Marco P. [Unidad de Analisis Instrumental, Departamento de Quimica y Suelos, Decanato de Agronomia, Universidad Centro-occidental Lisandro Alvarado, Apartado Postal 4076, Cabudare 3023 (Venezuela)]. E-mail: luemerumarco@yahoo.es; Hernandez-Caraballo, Edwin A. [Instituto Venezolano-Andino para la Investigacion Quimica (IVAIQUIM), Facultad de Ciencias, Universidad de los Andes, Merida 5101 (Venezuela)

    2004-08-31

    The technique of total reflection X-ray fluorescence (TXRF) is well suited for the direct analysis of biological samples due to the low matrix interferences and simultaneous multi-element nature. Nevertheless, biological organic samples are frequently analysed after digestion procedures. The direct determination of analytes requires shorter analysis time, low reactive consumption and simplifies the whole analysis process. On the other hand, the biological/clinical samples are often available in minimal amounts and routine studies require the analysis of large number of samples. To overcome the difficulties associated with the analysis of organic samples, particularly of solid ones, different procedures of sample preparation and calibration to approach the direct analysis have been evaluated: (1) slurry sampling, (2) Compton peak standardization, (3) in situ microwave digestion, (4) in situ chemical modification and (5) direct analysis with internal standardization. Examples of analytical methods developed by our research group are discussed. Some of them have not been previously published, illustrating alternative strategies for coping with various problems that may be encountered in the direct analysis by total reflection X-ray fluorescence spectrometry.

  8. Variable-angle total internal reflection fluorescence microscopy of intact cells of Arabidopsis thaliana

    Directory of Open Access Journals (Sweden)

    Kim Myung K

    2011-09-01

    Full Text Available Abstract Background Total internal reflection fluorescence microscopy (TIRFM is a powerful tool for observing fluorescently labeled molecules on the plasma membrane surface of animal cells. However, the utility of TIRFM in plant cell studies has been limited by the fact that plants have cell walls, thick peripheral layers surrounding the plasma membrane. Recently, a new technique known as variable-angle epifluorescence microscopy (VAEM was developed to circumvent this problem. However, the lack of a detailed analysis of the optical principles underlying VAEM has limited its applications in plant-cell biology. Results Here, we present theoretical and experimental evidence supporting the use of variable-angle TIRFM in observations of intact plant cells. We show that when total internal reflection occurs at the cell wall/cytosol interface with an appropriate angle of incidence, an evanescent wave field of constant depth is produced inside the cytosol. Results of experimental TIRFM observations of the dynamic behaviors of phototropin 1 (a membrane receptor protein and clathrin light chain (a vesicle coat protein support our theoretical analysis. Conclusions These findings demonstrate that variable-angle TIRFM is appropriate for quantitative live imaging of cells in intact tissues of Arabidopsis thaliana.

  9. New attenuation correction for the HRRT using transmission scatter correction and total variation regularization

    DEFF Research Database (Denmark)

    Sibomana, Merence; Keller, Sune Høgild; Svarer, Claus

    2009-01-01

    tissue segmentation in these regions and the lack of scatter correction in the μ-map reconstruction. In this paper we describe and validate the new TXTV segmentation method (included in the HRRT_U 1.0 and 1.1 user software) aimed at solving the bias problem. Its improvements fall in two parts: Firstly......, it introduces the use of scatter correction, and secondly, it uses a simple threshold in combination with nonlinear total variation μ-map filtering. To validate the new transmission μ-map reconstruction with scatter correction and TXTV segmentation, we compared the average activity in 50 RoIs average...

  10. Stable isotopes of nitrate reflect natural attenuation of propellant residues on military training ranges.

    Science.gov (United States)

    Bordeleau, Geneviève; Savard, Martine M; Martel, Richard; Smirnoff, Anna; Ampleman, Guy; Thiboutot, Sonia

    2013-08-06

    Nitroglycerin (NG) and nitrocellulose (NC) are constituents of double-base propellants used notably for firing antitank ammunitions. Nitroglycerin was detected in soil and water samples from the unsaturated zone (pore water) at an active antitank firing position, where the presence of high nitrate (NO3(-)) concentrations suggests that natural attenuation of NG is occurring. However, concentrations alone cannot assess if NG is the source of NO3(-), nor can they determine which degradation processes are involved. To address this issue, isotopic ratios (δ(15)N, δ(18)O) were measured for NO3(-) produced from NG and NC through various controlled degradation processes and compared with ratios measured in field pore water samples. Results indicate that propellant combustion and degradation mediated by soil organic carbon produced the observed NO3(-) in pore water at this site. Moreover, isotopic results are presented for NO3(-) produced through photolysis of propellant constituents, which could be a dominant process at other sites. The isotopic data presented here constitute novel information regarding a source of NO3(-) that was practically not documented before and a basis to study the contamination by energetic materials in different contexts.

  11. Attenuation fluctuations and local dermal reflectivity are indicators of immune cell infiltrate and epidermal hyperplasia in skin inflammation

    Science.gov (United States)

    Phillips, Kevin G.; Wang, Yun; Choudhury, Niloy; Levitz, David; Swanzey, Emily; Lagowski, James; Kulesz-Martin, Molly; Jacques, Steven

    2012-02-01

    Psoriasis is a common inflammatory skin disease resulting from genetic and environmental alterations of cutaneous immune responses responsible for skin homeostasis. While numerous therapeutic targets involved in the immunopathogenesis of psoriasis have been identified, the in vivo dynamics of psoriasis remains under investigated. To elucidate the spatial-temporal morphological evolution of psoriasis we undertook in vivo time course focus-tracked optical coherence tomography (OCT) imaging to non-invasively document dermal alterations due to immune cell infiltration and epidermal hyperplasia in an Imiquimod (IMQ) induced model of psoriasis-like inflammation in DBA2/C57Bl6 hybrid mice. Quantitative appraisal of dermal architectural changes was achieved through a three parameter fit of OCT axial scans in the dermis of the form A(z) = ρ exp(-mu;z +ɛ(z)). Ensemble averaging of the fit parameters over 2000 axial scans per mouse in each treatment arm revealed that the local dermal reflectivity ρ, decreased significantly in response to 6 day IMQ treatment (p = 0.0001), as did the standard deviation of the attenuation fluctuation std(ɛ(z)), (p = 0.04), in comparison to cream controls and day 1 treatments. No significant changes were observed in the average dermal attenuation rate, μ. Our results suggest these label-free OCT-based metrics can be deployed to investigate new therapeutic targets in animal models as well as aid in clinical staging of psoriasis in conjunction with the psoriasis area and severity index.

  12. The Mixture of Salvianolic Acids from Salvia miltiorrhiza and Total Flavonoids from Anemarrhena asphodeloides Attenuate Sulfur Mustard-Induced Injury.

    Science.gov (United States)

    Li, Jianzhong; Chen, Linlin; Wu, Hongyuan; Lu, Yiming; Hu, Zhenlin; Lu, Bin; Zhang, Liming; Chai, Yifeng; Zhang, Junping

    2015-10-15

    Sulfur mustard (SM) is a vesicating chemical warfare agent used in numerous military conflicts and remains a potential chemical threat to the present day. Exposure to SM causes the depletion of cellular antioxidant thiols, mainly glutathione (GSH), which may lead to a series of SM-associated toxic responses. MSTF is the mixture of salvianolic acids (SA) of Salvia miltiorrhiza and total flavonoids (TFA) of Anemarrhena asphodeloides. SA is the main water-soluble phenolic compound in Salvia miltiorrhiza. TFA mainly includes mangiferin, isomangiferin and neomangiferin. SA and TFA possess diverse activities, including antioxidant and anti-inflammation activities. In this study, we mainly investigated the therapeutic effects of MSTF on SM toxicity in Sprague Dawley rats. Treatment with MSTF 1 h after subcutaneous injection with 3.5 mg/kg (equivalent to 0.7 LD50) SM significantly increased the survival levels of rats and attenuated the SM-induced morphological changes in the testis, small intestine and liver tissues. Treatment with MSTF at doses of 60 and 120 mg/kg caused a significant (ptotal of 36 pathways, such as the MAPK signaling pathway, pathways in cancer, antigen processing and presentation. These data suggest that MSTF attenuates SM-induced injury by increasing GSH and targeting multiple pathways, including the MAPK signaling pathway, as well as antigen processing and presentation. These results suggest that MSTF has the potential to be used as a potential therapeutic agent against SM injuries.

  13. Carvacrol attenuates serum levels of total protein, phospholipase A2 and histamine in asthmatic guinea pig

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein Boskabady

    2016-11-01

    Full Text Available Objective: Pharmacological effects of carvacrol such as its anti-inflammatory activities have been shows. In this study the effects of carvacrol on serum levels of total protein (TP, phospholipase A2 (PLA2 and histamine in sensitized guinea pigs was evaluated. Materials and Methods: Sensitized guinea pigs were given drinking water alone (group S, drinking water containing three concentrations of carvacrol (40, 80 and 160 µg/ml or dexamethasone. Serum levels of TP, PLA2 and histamine were examined I all sensitized groups as well as a non-sensitized control group (n=6 for each group. Results: In sensitized animals, serum levels of TP, PLA2 and histamine were significantly increased compared to control animals (p

  14. The Mixture of Salvianolic Acids from Salvia miltiorrhiza and Total Flavonoids from Anemarrhena asphodeloides Attenuate Sulfur Mustard-Induced Injury

    Directory of Open Access Journals (Sweden)

    Jianzhong Li

    2015-10-01

    Full Text Available Sulfur mustard (SM is a vesicating chemical warfare agent used in numerous military conflicts and remains a potential chemical threat to the present day. Exposure to SM causes the depletion of cellular antioxidant thiols, mainly glutathione (GSH, which may lead to a series of SM-associated toxic responses. MSTF is the mixture of salvianolic acids (SA of Salvia miltiorrhiza and total flavonoids (TFA of Anemarrhena asphodeloides. SA is the main water-soluble phenolic compound in Salvia miltiorrhiza. TFA mainly includes mangiferin, isomangiferin and neomangiferin. SA and TFA possess diverse activities, including antioxidant and anti-inflammation activities. In this study, we mainly investigated the therapeutic effects of MSTF on SM toxicity in Sprague Dawley rats. Treatment with MSTF 1 h after subcutaneous injection with 3.5 mg/kg (equivalent to 0.7 LD50 SM significantly increased the survival levels of rats and attenuated the SM-induced morphological changes in the testis, small intestine and liver tissues. Treatment with MSTF at doses of 60 and 120 mg/kg caused a significant (p < 0.05 reversal in SM-induced GSH depletion. Gene expression profiles revealed that treatment with MSTF had a dramatic effect on gene expression changes caused by SM. Treatment with MSTF prevented SM-induced differential expression of 93.8% (973 genes of 1037 genes. Pathway enrichment analysis indicated that these genes were mainly involved in a total of 36 pathways, such as the MAPK signaling pathway, pathways in cancer, antigen processing and presentation. These data suggest that MSTF attenuates SM-induced injury by increasing GSH and targeting multiple pathways, including the MAPK signaling pathway, as well as antigen processing and presentation. These results suggest that MSTF has the potential to be used as a potential therapeutic agent against SM injuries.

  15. Metals determination in coffee sample by total reflection X-ray fluorescence analysis (TXRF)

    Energy Technology Data Exchange (ETDEWEB)

    Vives, Ana Elisa Sirito de [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil). Faculdade de Engenharia, Arquitetura e Urbanismo]. E-mail: aesvives@unimep.br; Moreira, Silvana [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Civil, Arquitetura e Urbanismo]. E-mail: Silvana@fec.unicamp.br; Brienza, Sandra Maria Boscolo [ Universidade Metodista de Piracicaba (UNIMEP), Piracicaba, SP (Brazil). Faculdade de Ciencias Matematicas, da Natureza e de Tecnologia da Informacao]. E-mail: sbrienza@unimep.br; Zucchi, Orgheda Luiza Araujo Domingues [Sao Paulo Univ., Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas]. E-mail: olzucchi@fcfrp.usp.br; Nascimento Filho, Virgilio Franco do [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)]. E-mail: virgilio@cena.usp.br

    2005-07-01

    The objective of this study was to evaluate the inorganic concentration in five brands of coffee, three of them nationally marketed and the others of an exportation kind. The samples were prepared by infusion with deionized water. To carry out the calibration, standard solutions were prepared with different concentrations of Al, Si, K, Ca, Ti, Cr, Fe, Ni, Zn and Se. The measurements were carried out using a white beam of synchrotron radiation for excitation and a Si (Li) semiconductor detector for detection. By employing Synchrotron Radiation Total Reflection X-Ray Fluorescence Analysis (SR-TXRF) it was possible to evaluate the concentrations of P, S, Cl, K, Ca, Mn, Fe, Cu, Zn, Rb and Ba. The detection limits for 300 s counting time were in the range of 0.03 (Ca) to 30 ng.g{sup -1} (Rb), respectively. (author)

  16. A Novel Method for Enhancing Goos-H(a)nchen Shift in Total Internal Reflection

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-Wei; WEN Ting-Dun; ZHANG Ji-Long

    2009-01-01

    Due to the tiny shift in order of optical wavelength for Goos-Hiinchen (GH) shift,it is very difficult to directly measure and apply the GH shift.We develop a new method for enhancing GH shift of both TE and TM polarized waves.The method is based on a total reflection prism made of BK9 glass combined with a precise measurement of the resulting spatial displacement with a one-dimensional charge coupled device (CCD).Measurements are performed to examine the validity of the method.Experimental and theoretical results indicate the feasibility of the method with an enhancement in optical wavelenghth shift at millimetre scale.The method is advantageous to application the GH shift in the optical domain,and is also meaningful for measuring even smaller changes in the refractive index of a liquid.

  17. Watch your step! A frustrated total internal reflection approach to forensic footwear imaging

    Science.gov (United States)

    Needham, J. A.; Sharp, J. S.

    2016-02-01

    Forensic image retrieval and processing are vital tools in the fight against crime e.g. during fingerprint capture. However, despite recent advances in machine vision technology and image processing techniques (and contrary to the claims of popular fiction) forensic image retrieval is still widely being performed using outdated practices involving inkpads and paper. Ongoing changes in government policy, increasing crime rates and the reduction of forensic service budgets increasingly require that evidence be gathered and processed more rapidly and efficiently. A consequence of this is that new, low-cost imaging technologies are required to simultaneously increase the quality and throughput of the processing of evidence. This is particularly true in the burgeoning field of forensic footwear analysis, where images of shoe prints are being used to link individuals to crime scenes. Here we describe one such approach based upon frustrated total internal reflection imaging that can be used to acquire images of regions where shoes contact rigid surfaces.

  18. Tunneling mode in a frustrated total internal reflection structure with hyperbolic metamaterial

    Science.gov (United States)

    Luo, Li; Li, Chaoyang; Tang, Tingting

    2016-10-01

    We study the tunneling modes in a frustrated total internal reflection (FTIR) structure with hyperbolic metamaterial (HMM). The physical mechanism of tunneling mode is analyzed by the condition of general zero average permittivity. The influence of anisotropy, loss and dispersion of HMM on tunneling modes is discussed based on simulation results. Tunneling mode merging or splitting can be realized by adjusting the thickness of air or HMM. We can also find the absorption of HMM significantly reduces the transmittance peak of tunneling mode. When a recently reported HMM of ZnAlO/ZnO multilayer is introduced in the FTIR structure, the combined action of HMM loss and dispersion brings many small tunneling modes in the angular spectrum. The tunneling mode in the proposed structure can be used to design filters and wavelength selectors which may also have applications in wavelength de-multiplexing in optical communications.

  19. Imaging Early Steps of Sindbis Virus Infection by Total Internal Reflection Fluorescence Microscopy

    Directory of Open Access Journals (Sweden)

    Youling Gu

    2011-01-01

    Full Text Available Sindbis virus (SINV is an alphavirus that has a broad host range and has been widely used as a vector for recombinant gene transduction, DNA-based vaccine production, and oncolytic cancer therapy. The mechanism of SINV entry into host cells has yet to be fully understood. In this paper, we used single virus tracking under total internal reflection fluorescence microscopy (TIRFM to investigate SINV attachment to cell surface. Biotinylated viral particles were labeled with quantum dots, which retained viral viability and infectivity. By time-lapse imaging, we showed that the SINV exhibited a heterogeneous dynamics on the surface of the host cells. Analysis of SINV motility demonstrated a two-step attachment reaction. Moreover, dual color TIRFM of GFP-Rab5 and SINV suggested that the virus was targeted to the early endosomes after endocytosis. These findings demonstrate the utility of quantum dot labeling in studying the early steps and behavior of SINV infection.

  20. Beer analysis by synchrotron radiation total reflection X-ray fluorescence (SR-TXRF)

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Silvana [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Civil, Arquitetura e Urbanismo. Dept. de Recursos Hidricos]. E-mail: silvana@fec.unicamp.br; Vives, Ana Elisa S. de [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil). Faculdade de Engenharia, Arquitetura e Urbanismo]. E-mail: aesvives@unimep.br; Nascimento Filho, Virgilio F. [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil). Lab. de Instrumentacao Nuclear]. E-mail: virgilio@cena.usp.br; Zucchi, Orgheda L.D.A. [Sao Paulo Univ., Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas de Ribeirao Preto]. E-mail: olzucchi@fcfrp.usp.br

    2005-07-01

    In this work the concentrations of P, S, Cl, K, Ca, Mn, Fe, Zn and Br in twenty-nine brands of national and international beers were determined by Synchrotron Radiation Total Reflection X-Ray Fluorescence analysis (SR-TXRF). The results were compared with the limits established by the Brazilian Legislation and the nutritive values established by National Agricultural Library (NAL). The measurements were performed at the X-ray Fluorescence Beamline at Synchrotron Light Source Laboratory, in Campinas, Sao Paulo, Brazil, using a polychromatic beam for excitation. A small volume of 5 {mu}L of sample beers containing just an internal standard, used to correct geometry effects, were analyzed without any pre-treatment. The measuring time was 100 s and the detection limits obtained varied from 1{mu}g.L{sup -1} for Mn and Fe to 15{mu}g.L{sup -1} for P. (author)

  1. Redistribution of fluorescent molecules at the solid/liquid interface with total internal reflection illumination.

    Science.gov (United States)

    Wei, Lin; Ye, Zhongju; Luo, Wenjuan; Chen, Bo; Xiao, Lehui

    2016-08-01

    Many intriguing physical and chemical processes commonly take place at the solid/liquid interface. Total internal reflection illumination, together with single molecule spectroscopy, provides a robust platform for the selective exploration of kinetic processes close the interface. With these techniques, it was observed that the distribution of Rhodamine B molecules close to a solid/liquid interface could be regulated in a photo-induced route. The laser-induced repulsion force at this interface is enough to compromise the Brownian diffusion of single molecules in a range of several hundred nanometers normal to the solid/liquid interface. This observation is fundamentally and practically interesting because moderate laser intensity is enough to initiate this repulsion effect. Therefore, it might display extensive applications in the development of photo-modulation technique with high throughput capability.

  2. First Total Reflection X-Ray Fluorescence round-robin test of water samples: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Borgese, Laura; Bilo, Fabjola [Chemistry for Technologies Laboratory, University of Brescia, Brescia (Italy); Tsuji, Kouichi [Graduate School of Engineering, Osaka City University, Osaka (Japan); Fernández-Ruiz, Ramón [Servicio Interdepartamental de Investigación (SIdI), Laboratorio de TXRF, Universidad Autónoma de Madrid, Madrid (Spain); Margui, Eva [Department of Chemistry, University of Girona, Girona (Spain); Streli, Christina [TU Wien, Atominstitut,Radiation Physics, Vienna (Austria); Pepponi, Giancarlo [Fondazione Bruno Kessler, Povo, Trento (Italy); Stosnach, Hagen [Bruker Nano GmbH, Berlin (Germany); Yamada, Takashi [Rigaku Corporation, Takatsuki, Osaka (Japan); Vandenabeele, Peter [Department of Archaeology, Ghent University, Ghent (Belgium); Maina, David M.; Gatari, Michael [Institute of Nuclear Science and Technology, University of Nairobi, Nairobi (Kenya); Shepherd, Keith D.; Towett, Erick K. [World Agroforestry Centre (ICRAF), Nairobi (Kenya); Bennun, Leonardo [Laboratorio de Física Aplicada, Departamento de Física, Universidad de Concepción (Chile); Custo, Graciela; Vasquez, Cristina [Gerencia Química, Laboratorio B025, Centro Atómico Constituyentes, San Martín (Argentina); Depero, Laura E., E-mail: laura.depero@unibs.it [Chemistry for Technologies Laboratory, University of Brescia, Brescia (Italy)

    2014-11-01

    Total Reflection X-Ray Fluorescence (TXRF) is a mature technique to evaluate quantitatively the elemental composition of liquid samples deposited on clean and well polished reflectors. In this paper the results of the first worldwide TXRF round-robin test of water samples, involving 18 laboratories in 10 countries are presented and discussed. The test was performed within the framework of the VAMAS project, interlaboratory comparison of TXRF spectroscopy for environmental analysis, whose aim is to develop guidelines and a standard methodology for biological and environmental analysis by means of the TXRF analytical technique. - Highlights: • The discussion of the first worldwide TXRF round-robin test of water samples (18 laboratories of 10 countries) is reported. • Drinking, waste, and desalinated water samples were tested. • Data dispersion sources were identified: sample concentration, preparation, fitting procedure, and quantification. • The protocol for TXRF analysis of drinking water is proposed.

  3. Evaluation of lateral resolution of scanning surface microscopy by total internal reflection with thermal lens effect.

    Science.gov (United States)

    Shimosaka, Takuya; Izako, Masakazu; Uchiyama, Katsumi; Hobo, Toshiyuki

    2003-06-01

    We have developed a novel method for in situ and non-destructive surface analyses, or a total internal reflection with thermal lens spectroscopy (TIR-TLS), which has sufficient sensitivity to monitor phenomena in thin films, such as lipid bilayers. In this study, we applied TIR-TLS to microscopy for surface analyses, and we experimentally obtained its lateral resolution using the edge of a chromium film made by a photolithography technique. The obtained resolution was 20 microm, which was 60% of the diameter of an excitation beam at the interface. The estimated resolution with a simple model agreed with the experimental one, and from this model, TIR-TLS microscopy has the same resolution as that of ordinary optical microscopy. The microscopy by TIR-TLS was applied to a sample whose contrast was too weak to be visually seen, and an image of the sample was obtained without any loss of resolution.

  4. Observation of Insulin Exocytosis by a Pancreatic (3 Cell Line with Total Internal Reflection Fluorescence Microscopy

    Institute of Scientific and Technical Information of China (English)

    Zhao-ying Fu; Ya-ping Wang; Yu Chen

    2011-01-01

    @@ INSULIN secretion was traditionally measured with biochemical and immunological methods such as enzyme linked immunosorbant assay and radio-immunoassay.However,these methods can only tell the amount of insulin secreted; they give no information about the secretion process or mechanism of exocytosis.In recent years,an imaging technique known as total internal reflection fluorescence (TIRF) microscopy has been employed to study insulin secretion.1-4 This imaging technique can explore events taking place near or on live cell membrane,such as secretory granule movement,exocytosis,vesicle content release,and membrane fusion.5-10 In the present paper,we applied TIRF microscopy to the observation of insulin exocytosis by the pancreatic β cell line Ins-1.

  5. Trace element determination in amniotic fluid by total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Greaves, E.D.; Sajo-Bohus, L.; Castelli, C.; Borgerg, C. [Universidad Simon Bolivar, Caracas (Venezuela); Meitin, J.; Liendo, J.

    1995-03-01

    A new method is reported for the determination of Fe, Cu, Zn, and Br in amniotic fluid (AF) by Total Reflection X-Ray Fluorescence. The irradiation of AF samples with monochromatic X-Rays reduces the scattering background from the organic matrix and avoids the need for sample digestion. Sample manipulation is reduced to centrifuging and adding cobalt as internal standard. Lower detection limits obtained are 109, 53, 44 and 37 ppb for Fe, Cu, Zn and Br respectively. Measurement precision depends on element concentrations and can be as low as 1.5% SD. Results of the analysis of 34 AF samples from Venezuelan pregnant patients agree with previously reported ranges of Fe, Cu and Zn. Other elements observed but not quantified are Cl, K, Ca in all spectra and Pb and Sr in some of them. (author).

  6. Total reflection X-ray fluorescence and archaeometry: Application in the Argentinean cultural heritage

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, Cristina [Comision Nacional de Energia Atomica, Av. Gral Paz 1499 (B1650KNA) San Martin, Buenos Aires (Argentina); Laboratorio de Quimica de Sistemas Heterogeneos, Facultad de Ingenieria, Universidad de Buenos Aires, P. Colon 850 (C1063ACU), Buenos Aires (Argentina)], E-mail: Cristina.Vazquez@cnea.gov.ar; Albornoz, Ana [Agencia Rio Negro Cultura, Museo de la Patagonia F.P.Moreno, Centro Civico s/n Bariloche, Rio Negro (Argentina); Hajduk, Adam [CONICET, Museo de la Patagonia F.P.Moreno, Centro Civico s/n Bariloche, Rio Negro (Argentina); Elkin, Dolores [CONICET Instituto Nacional de Antropologia y Pensamiento Latinoamericano, 3 de febrero 1378 (C1426AEL) Buenos Aires (Argentina); Custo, Graciela; Obrustky, Alba [Comision Nacional de Energia Atomica, Av. Gral Paz 1499 (B1650KNA) San Martin, Buenos Aires (Argentina)

    2008-12-15

    Archaeometry is an interdisciplinary research area involved in the development and use of scientific methods in order to answer questions concerned with the human history. In this way the knowledge of archaeological objects through advanced chemical and physical analyses permits a better preservation and conservation of the cultural heritage and also reveals materials and technologies used in the past. In this sense, analytical techniques play an important role in order to provide chemical information about cultural objects. Considering the non destructive characteristic of this study, analytical techniques must be adequate in order to prevent any alteration or damage and in addition to allow the conservation of their integrity. Taking into account the irreplaceable character of the archaeological and artistic materials considered in this study, analytical techniques must be adequate in order to prevent any alteration or damage and in addition to allow the conservation of their integrity. Total Reflection X-ray Fluorescence Spectrometry as a geometric variant of conventional X-ray fluorescence is a proved microanalytical technique considering the small amount of sample required for the analysis. A few micrograms are enough in order to reveal valuable information about elemental composition and in this context it is highly recommended for artwork studies. In this paper a case study is presented in which Total Reflection X-Ray Fluorescence Spectrometry has been successfully employed in the archaeometry field. Examples from Argentinean cultural heritage sites related with the determination of pigments in paintings on canvas and in rock sites as well as in underwater archaeology research are shown.

  7. Analysis of total oil and fatty acids composition by near infrared reflectance spectroscopy in edible nuts

    Science.gov (United States)

    Kandala, Chari V.; Sundaram, Jaya

    2014-10-01

    Near Infrared (NIR) Reflectance spectroscopy has established itself as an important tool in quantifying water and oil present in various food materials. It is rapid and nondestructive, easier to use, and does not require processing the samples with corrosive chemicals that would render them non-edible. Earlier, the samples had to be ground into powder form before making any measurements. With the development of new soft ware packages, NIR techniques could now be used in the analysis of intact grain and nuts. While most of the commercial instruments presently available work well with small grain size materials such as wheat and corn, the method present here is suitable for large kernel size products such as shelled or in-shell peanuts. Absorbance spectra were collected from 400 nm to 2500 nm using a NIR instrument. Average values of total oil contents (TOC) of peanut samples were determined by standard extraction methods, and fatty acids were determined using gas chromatography. Partial least square (PLS) analysis was performed on the calibration set of absorption spectra, and models were developed for prediction of total oil and fatty acids. The best model was selected based on the coefficient of determination (R2), Standard error of prediction (SEP) and residual percent deviation (RPD) values. Peanut samples analyzed showed RPD values greater than 5.0 for both absorbance and reflectance models and thus could be used for quality control and analysis. Ability to rapidly and nondestructively measure the TOC, and analyze the fatty acid composition, will be immensely useful in peanut varietal improvement as well as in the grading process of grain and nuts.

  8. Sensitivity Studies for Space-based Measurements of Atmospheric Total Column Carbon Dioxide Using Reflected Sunlight

    Science.gov (United States)

    Mao, Jianping; Kawa, S. Randolph

    2003-01-01

    A series of sensitivity studies is carried out to explore the feasibility of space-based global carbon dioxide (CO2) measurements for global and regional carbon cycle studies. The detection method uses absorption of reflected sunlight in the CO2 vibration-rotation band at 1.58 micron. The sensitivities of the detected radiances are calculated using the line-by-line model (LBLRTM), implemented with the DISORT (Discrete Ordinates Radiative Transfer) model to include atmospheric scattering in this band. The results indicate that (a) the small (approx.1%) changes in CO2 near the Earth's surface are detectable in this CO2 band provided adequate sensor signal-to-noise ratio and spectral resolution are achievable; (b) the effects of other interfering constituents, such as water vapor, aerosols and cirrus clouds, on the radiance are significant but the overall effects of the modification of light path length on total back-to-space radiance sensitivity to CO2 change are minor for general cases, which means that generally the total column CO2 can be derived in high precision from the ratio of the on-line center to off-line radiances; (c) together with CO2 gas absorption aerosol/cirrus cloud layer has differential scattering which may result in the modification of on-line to off-line radiance ratio which could lead a large bias in the total column CO2 retrieval. Approaches to correct such bias need further investigation. (d) CO2 retrieval requires good knowledge of the atmospheric temperature profile, e.g. approximately 1K RMS error in layer temperature, which is achievable from new atmospheric sounders in the near future; (e) the atmospheric path length, over which the CO2 absorption occurs, should be known in order to correctly interpret horizontal gradients of CO2 from the total column CO2 measurement; thus an additional sensor for surface pressure measurement needs to be attached for a complete measurement package.

  9. Two-Dimensional Standing Wave Total Internal Reflection Fluorescence Microscopy: Superresolution Imaging of Single Molecular and Biological Specimens

    OpenAIRE

    2007-01-01

    The development of high resolution, high speed imaging techniques allows the study of dynamical processes in biological systems. Lateral resolution improvement of up to a factor of 2 has been achieved using structured illumination. In a total internal reflection fluorescence microscope, an evanescence excitation field is formed as light is total internally reflected at an interface between a high and a low index medium. The

  10. Structural Health Monitoring Using Lamb Wave Reflections and Total Focusing Method for Image Reconstruction

    Science.gov (United States)

    Muller, Aurelia; Robertson-Welsh, Bradley; Gaydecki, Patrick; Gresil, Matthieu; Soutis, Constantinos

    2016-11-01

    This investigation aimed to adapt the total focusing method (TFM) algorithm (originated from the synthetic aperture focusing technique in digital signal processing) to accommodate a circular array of piezoelectric sensors (PZT) and characterise defects using guided wave signals for the development of a structural health monitoring system. This research presents the initial results of a broader study focusing on the development of a structural health monitoring (SHM) guided wave system for advance carbon fibre reinforced plastic (CFRP) composite materials. The current material investigated was an isotropic (aluminium) square plate with 16 transducers operating successively as emitter or sensor in pitch and catch configuration enabling the collection of 240 signals per assessment. The Lamb wave signals collected were tuned on the symmetric fundamental mode with a wavelength of 17 mm, by setting the excitation frequency to 300 kHz. The initial condition for the imaging system, such as wave speed and transducer position, were determined with post processing of the baseline signals through a method involving the identification of the waves reflected from the free edge of the plate. The imaging algorithm was adapted to accommodate multiple transmitting transducers in random positions. A circular defect of 10 mm in diameter was drilled in the plate, which is similar to the delamination size introduced by a low velocity impact event in a composite plate. Images were obtained by applying the TFM to the baseline signals, Test 1 data (corresponding to the signals obtained after introduction of the defect) and to the data derived from the subtraction of the baseline to the Test 1 signals. The result shows that despite the damage diameter being 40 % smaller than the wavelength, the image (of the subtracted baseline data) demonstrated that the system can locate where the waves were reflected from the defect boundary. In other words, the contour of the damaged area was

  11. Structural Health Monitoring Using Lamb Wave Reflections and Total Focusing Method for Image Reconstruction

    Science.gov (United States)

    Muller, Aurelia; Robertson-Welsh, Bradley; Gaydecki, Patrick; Gresil, Matthieu; Soutis, Constantinos

    2017-04-01

    This investigation aimed to adapt the total focusing method (TFM) algorithm (originated from the synthetic aperture focusing technique in digital signal processing) to accommodate a circular array of piezoelectric sensors (PZT) and characterise defects using guided wave signals for the development of a structural health monitoring system. This research presents the initial results of a broader study focusing on the development of a structural health monitoring (SHM) guided wave system for advance carbon fibre reinforced plastic (CFRP) composite materials. The current material investigated was an isotropic (aluminium) square plate with 16 transducers operating successively as emitter or sensor in pitch and catch configuration enabling the collection of 240 signals per assessment. The Lamb wave signals collected were tuned on the symmetric fundamental mode with a wavelength of 17 mm, by setting the excitation frequency to 300 kHz. The initial condition for the imaging system, such as wave speed and transducer position, were determined with post processing of the baseline signals through a method involving the identification of the waves reflected from the free edge of the plate. The imaging algorithm was adapted to accommodate multiple transmitting transducers in random positions. A circular defect of 10 mm in diameter was drilled in the plate, which is similar to the delamination size introduced by a low velocity impact event in a composite plate. Images were obtained by applying the TFM to the baseline signals, Test 1 data (corresponding to the signals obtained after introduction of the defect) and to the data derived from the subtraction of the baseline to the Test 1 signals. The result shows that despite the damage diameter being 40 % smaller than the wavelength, the image (of the subtracted baseline data) demonstrated that the system can locate where the waves were reflected from the defect boundary. In other words, the contour of the damaged area was

  12. Novel Propagation Properties of Total Internal Reflection Photonic Crystal Fibres with Rhombic Air Holes

    Institute of Scientific and Technical Information of China (English)

    YAN Hai-Feng; YU Zhong-Yuan; LIU Yu-Min; TIAN Hong-Da; HAN Li-Hong

    2011-01-01

    We investigate the propagation properties of a multi-layer photonic crystal fiber with novel rhombic air holes using the finite element method,and calculate the dependence of the propagation properties on the wavelength in the fiber with different geometrical structural parameters,including the internal angle and the external arrangement of the rhombic air holes.Optimizing these parameters,we design a photonic crystal which exhibits both a small dispersion value and low loss near the wavelength of 1.55 μm.Photonic crystal fibers are known as microstructured optical fibers or multi-hole optical fibers,and their cross sections have periodic structures with hollows in the centers due to one or more missing air holes as shown in Fig.1.The light wave can propagate along this hollow structure,which can be considered as the core of the fiber.According to the light-guiding mechanism,there are two types of photonic crystal fibers:total internal reflection photonic crystal fibers and photonic bandgap photonic crystal fibers.[1] The propagation properties of total internal reflection photonic crystal fibers are determined by the arrangements of holes in the transverse field.[1,2] With the flexibility to control the arrangement,size and shape of the air holes,various photonic crystal fibers with different optical properties can be designed as desired.Recently the microstructural design of photonic crystal fibers has drawn extensive attention over the world.[3] As a novel kind of optical fiber,photonic crystal fibers have been widely used for optoelectronic devices.%We investigate the propagation properties of a multi-layer photonic crystal fiber with novel rhombic air holes using the finite element method, and calculate the dependence of the propagation properties on the wavelength in the fiber with different geometrical structural parameters, including the internal angle and the external arrangement of the rhombic air holes. Optimizing these parameters, we design a photonic

  13. Direct experimental observation of giant Goos-Hänchen shifts from bandgap-enhanced total internal reflection.

    Science.gov (United States)

    Wan, Yuhang; Zheng, Zheng; Kong, Weijing; Liu, Ya; Lu, Zhiting; Bian, Yusheng

    2011-09-15

    Giant Goos-Hänchen (GH) shifts are experimentally demonstrated from a prism-coupled multilayer structure incorporating a one-dimensional photonic crystal (PC) through a bandgap-enhanced total internal reflection scheme. By combining the large phase changes near the bandgap of the PC and the low reflection loss of the total internal reflection, 2 orders of magnitude enhancement of the GH shift is realized with rather low extra optical loss, which might help to open the door toward many interesting applications for GH effects.

  14. Near-wall nanovelocimetry based on Total Internal Reflection Fluorescence with continuous tracking

    CERN Document Server

    Li, Zhenzhen; Lee, Choongyeop; Monti, Fabrice; Yonger, Marc; Chollet, Benjamin; Bresson, Bruno; Tran, Yvette; Tabeling, Patrick

    2014-01-01

    The goal of this work is to make progress in the domain of near-wall velocimetry. The technique we use is based on the tracking of nanoparticles in an evanescent field, close to a wall, a technique called TIRF (Total Internal Reflection Fluorescence)-based velocimetry. At variance with the methods developed in the literature, we permanently keep track of the light emitted by each particle during the time the measurements of their positions ('altitudes') and speeds are performed. By performing the Langevin simulation, we quantified effect of biases such as Brownian motion, heterogeneities induced by the walls, statistical biases, photo bleaching, polydispersivity and limited depth of field. Using this method, we obtained slip length on hydrophilic surfaces of 1$ \\pm $5 nm for sucrose solution, and 9$ \\pm $10 nm for water; On hydrophobic surface, 32$ \\pm $5 nm for sucrose solution, and 55$ \\pm $9 nm for water. The errors (based on 95% confidence intervals) are significantly smaller than the state-of-the-art, bu...

  15. Determination of element levels in human serum: Total reflection X-ray fluorescence applications

    Science.gov (United States)

    Majewska, U.; Łyżwa, P.; Łyżwa, K.; Banaś, D.; Kubala-Kukuś, A.; Wudarczyk-Moćko, J.; Stabrawa, I.; Braziewicz, J.; Pajek, M.; Antczak, G.; Borkowska, B.; Góźdź, S.

    2016-08-01

    Deficiency or excess of elements could disrupt proper functioning of the human body and could lead to several disorders. Determination of their concentrations in different biological human fluids and tissues should become a routine practice in medical treatment. Therefore the knowledge about appropriate element concentrations in human organism is required. The purpose of this study was to determine the concentration of several elements (P, S, Cl, K, Ca, Cr, Fe, Cu, Zn, Se, Br, Rb, Pb) in human serum and to define the reference values of element concentration. Samples of serum were obtained from 105 normal presumably healthy volunteers (66 women aged between 15 and 78 years old; 39 men aged between 15 and 77 years old). Analysis has been done for the whole studied population and for subgroups by sex and age. It is probably first so a wide study of elemental composition of serum performed in the case of Świętokrzyskie region. Total reflection X-ray fluorescence (TXRF) method was used to perform the elemental analysis. Spectrometer S2 Picofox (Bruker AXS Microanalysis GmbH) was used to identify and measure elemental composition of serum samples. Finally, 1st and 3rd quartiles were accepted as minimum and maximum values of concentration reference range.

  16. Total reflection X-ray fluorescence as a tool for food screening

    Science.gov (United States)

    Borgese, Laura; Bilo, Fabjola; Dalipi, Rogerta; Bontempi, Elza; Depero, Laura E.

    2015-11-01

    This review provides a comprehensive overview of the applications of total reflection X-ray fluorescence (TXRF) in the field of food analysis. Elemental composition of food is of great importance, since food is the main source of essential, major and trace elements for animals and humans. Some potentially toxic elements, dangerous for human health may contaminate food, entering the food chain from the environment, processing, and storage. For this reason the elemental analysis of food is fundamental for safety assessment. Fast and sensitive analytical techniques, able to detect major and trace elements, are required as a result of the increasing demand on multi-elemental information and product screening. TXRF is suitable for elemental analysis of food, since it provides simultaneous multi-elemental identification in a wide dynamic range of concentrations. Several different matrices may be analyzed obtaining results with a good precision and accuracy. In this review, the most recent literature about the use of TXRF for the analysis of food is reported. The focus is placed on the applications within food quality monitoring of drinks, beverages, vegetables, fruits, cereals, animal derivatives and dietary supplements. Furthermore, this paper provides a critical outlook on the developments required to transfer these methods from research to the industrial and analytical laboratories contexts.

  17. Total reflection X-ray fluorescence as a fast multielemental technique for human placenta sample analysis

    Science.gov (United States)

    Marguí, E.; Ricketts, P.; Fletcher, H.; Karydas, A. G.; Migliori, A.; Leani, J. J.; Hidalgo, M.; Queralt, I.; Voutchkov, M.

    2017-04-01

    In the present contribution, benchtop total reflection X-ray fluorescence spectrometry (TXRF) has been evaluated as a cost-effective multielemental analytical technique for human placenta analysis. An easy and rapid sample preparation consisting of suspending 50 mg of sample in 1 mL of a Triton 1% solution in deionized water showed to be the most suitable for this kind of samples. However, for comparison purposes, an acidic microwave acidic digestion procedure was also applied. For both sample treatment methodologies, limits of detection for most elements were in the low mg/kg level. Accurate and precise results were obtained using internal standardization as quantification approach and applying a correction factor to compensate for absorption effects. The correction factor was based on the proportional ratio between the slurry preparation results and those obtained for the analysis of a set of human placenta samples analysed by microwave acidic digestion and ICP-AES analysis. As a study case, the developed TXRF methodology was applied for multielemental analysis (K, Ca, Fe, Cu, Zn, As, Se, Br, Rb and Sr) of several healthy women's placenta samples from two regions in Jamaica.

  18. Optical design and laser ablation of surface textures: demonstrating total internal reflection

    Science.gov (United States)

    Gommans, Hans; Booij, Silvia; Pijlman, Fetze; Krijn, Marcel; de Zwart, Siebe; Sepkhanov, Ruslan; Beaumont, Dave; van der Schaft, Hans; Sanders, Rene

    2015-09-01

    In lighting applications key drivers for optical design of surface textures are integration of optical elements, the disentanglement of optical functionality and appearance and late stage configuration. We investigated excimer laser ablation as a mastering technology for micro textured surfaces, where we targeted an increase in correspondence between surface design and ablated surface for high aspect ratio structures. To achieve this we have improved the photo mask design using a heuristic algorithm that corrects for the angular dependence of the ablation process and the loss of image resolution at ablation depths that exceed the depth of field. Using this approach we have been able to demonstrate close correspondence between designed and ablated facet structures up to 75° inclination at 75 μm depth. These facet design parameters allow for total internal reflection (TIR) as a means of beam deflection which is demonstrated in a range of mono shaped cone arrays in hexagonal tessellation. BSDF analysis was used to characterize the narrow TIR deflection beams that matched the peak positions of the design down to 28° apex. In addition, a single surface TIR-Fresnel lens design with focal distance 5 mm has been manufactured using this photo mask design algorithm and beam collimation up to 12° beam angle and 32° field angle is shown. These outcomes demonstrate that the laser ablation process intrinsically yields sufficient small dispersion in structure and fillet radii for lighting applications.

  19. Total Reflection X-ray Fluorescence Analysis (TXRF) using the high flux SAXS camera

    CERN Document Server

    Wobrauschek, P; Pepponi, G; Bergmann, A; Glatter, O

    2002-01-01

    Combining the high photon flux from a rotating anode X-ray tube with an X-ray optical component to focus and monochromatize the X-ray beam is the most promising instrumentation for best detection limits in the modern XRF laboratory. This is realized by using the design of a high flux SAXS camera in combination with a 4 kW high brilliant rotating Cu anode X-ray tube with a graded elliptically bent multilayer and including a new designed module for excitation in total reflection geometry within the beam path. The system can be evacuated thus reducing absorption and scattering of air and removing the argon peak in the spectra. Another novelty is the use of a Peltier cooled drift detector with an energy resolution of 148 eV at 5.9 keV and 5 mm sup 2 area. For Co detection limits of about 300 fg determined by a single element standard have been achieved. Testing a real sample NIST 1643d led to detection limits in the range of 300 ng/l for the medium Z.

  20. Frustrated total internal reflection in organic light-emitting diodes employing sphere cavity embedded in polystyrene

    Science.gov (United States)

    Zhu, Peifen

    2016-02-01

    The light extraction efficiency of top-emitting organic light-emitting diodes (OLEDs) is numerically investigated employing the finite-difference time-domain method. The periodic nanostructures formed by embedding the sphere arrays in polystyrene (PS) are placed on top of OLED to frustrate the total internal reflection at the interface between OLED and free space. These nanostructures serve as an intermediate medium to extract the light out of OLED devices. Efficiently coupling both evanescent waves and propagation waves into spheres and subsequently extracting these light waves out of the sphere is key to achieving high extraction efficiency. By tuning the thickness of PS layer, both of the in-coupling efficiency and out-coupling efficiency are optimized for achieving high light extraction efficiency. Thicker PS layer results in higher in-coupling efficiency in sphere while the thinner PS layer leads to higher out-coupling efficiency. Thus the maximum light extraction is a trade-off between the in-coupling efficiency and out-coupling efficiency. The study shows that light extraction efficiency of 89% can be achieved by embedding 0.90 μm TiO2 sphere in 0.30 μm PS layer with optimized in-coupling efficiency, out-coupling efficiency and cavity effect.

  1. Automated nanoliter solution deposition for total reflection X-ray fluorescence analysis of semiconductor samples

    Energy Technology Data Exchange (ETDEWEB)

    Sparks, Chris M. [Process Characterization Laboratory, ATDF, Austin, TX 78741 (United States)]. E-mail: chris.sparks@atdf.com; Gondran, Carolyn H. [Process Characterization Laboratory, ATDF, Austin, TX 78741 (United States); Havrilla, George J. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Hastings, Elizabeth P. [Chemistry Division, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2006-11-15

    In this study, a BioDot BioJet dispensing system was investigated as a nanoliter sample deposition method for total reflection X-ray fluorescence (TXRF) analysis. The BioDot system was programmed to dispense arrays of 20 nL droplets of sample solution on Si wafers. Each 20 nL droplet was approximately 100 {mu}m in diameter. A 10 x 10 array (100 droplets) was deposited and dried in less than 2 min at room temperature and pressure, demonstrating the efficiency of the automated deposition method. Solutions of various concentrations of Ni and Ni in different matrices were made from stock trace element standards to investigate of the effect of the matrix on the TXRF signal. The concentrations were such that the levels of TXRF signal saturation could be examined. Arrays were deposited to demonstrate the capability of drying 100 {mu}L of vapor phase decomposition-like residue in the area of a typical TXRF detector.

  2. Design and construction of a multiwavelength, micromirror total internal reflectance fluorescence microscope.

    Science.gov (United States)

    Larson, Joshua; Kirk, Matt; Drier, Eric A; O'Brien, William; MacKay, James F; Friedman, Larry J; Hoskins, Aaron A

    2014-10-01

    Colocalization single-molecule spectroscopy (CoSMoS) has proven to be a useful method for studying the composition, kinetics and mechanisms of complex cellular machines. Key to the technique is the ability to simultaneously monitor multiple proteins and/or nucleic acids as they interact with one another. Here we describe a protocol for constructing a CoSMoS micromirror total internal reflection fluorescence microscope (mmTIRFM). Design and construction of a scientific microscope often requires a number of custom components and a substantial time commitment. In our protocol, we have streamlined this process by implementation of a commercially available microscopy platform designed to accommodate the optical components necessary for an mmTIRFM. The mmTIRF system eliminates the need for machining custom parts by the end user and facilitates optical alignment. Depending on the experience level of the microscope builder, these time savings and the following protocol can enable mmTIRF construction to be completed within 2 months.

  3. Total reflection X-ray fluorescence analysis of pollen as an indicator for atmospheric pollution*1

    Science.gov (United States)

    Pepponi, G.; Lazzeri, P.; Coghe, N.; Bersani, M.; Gottardini, E.; Cristofolini, F.; Clauser, G.; Torboli, A.

    2004-08-01

    The viability of pollen is affected by environmental pollution and its use as a bio-indicator is proposed. Such effects can be observed and quantified by biological tests. However, a more accurate identification of the agents affecting the viability is required in order to validate the biological assay for environmental monitoring. The chemical analysis of pollen is meant to ascertain the existence of a correlation between its reduced biological functions and the presence of pollutants. Moreover, such biological systems act as accumulators and allow the detection and quantification of species present in the environment at low concentrations. Total reflection X-ray fluorescence analysis (TXRF) has been chosen for the investigation due to its high sensitivity, multielement capability and wide dynamic range. Corylus avellana L. (hazel) pollen has been collected in areas with different anthropic impact in the province of Trento, Italy. For the TXRF measurements, a liquid sample is needed, especially if a quantitative analysis is required. In the present work, the analysis after a microwave digestion has been compared with the analysis of a suspension of the pollen samples. In both cases, an internal standard has been used for the quantification. The concentrations of 17 elements ranging from Al to Pb have been determined in 13 samples. Analysis of the suspensions showed to be comparable to that of digested samples in terms of spectral quality, but the latter preparation method gave better reproducibility. Sub-ppm lowest limits of detection were obtained for iron and heavier elements detected.

  4. 3D reconstruction of cortical microtubules using multi-angle total internal reflection fluorescence microscopy

    Science.gov (United States)

    Jin, Luhong; Xiu, Peng; Zhou, Xiaoxu; Fan, Jiannan; Kuang, Cuifang; Liu, Xu; Xu, Yingke

    2017-01-01

    Total internal reflection fluorescence microscopy (TIRFM) has been widely used in biomedical research to visualize cellular processes near the cell surface. In this study, a novel multi-angle ring-illuminated TIRFM system, equipped with two galvo mirrors that are on conjugate plan of a 4f optical system was developed. Multi-angle TIRFM generates images with different penetration depths through the controlled variation of the incident angle of illuminating laser. We presented a method to perform three-dimensional (3-D) reconstruction of microtubules from multi-angle TIRFM images. The performance of our method was validated in simulated microtubules with variable signal-to-noise ratios (SNR) and the axial resolution and accuracy of reconstruction were evaluated in selecting different numbers of illumination angles or in different SNR conditions. In U373 cells, we reconstructed the 3-D localization of microtubules near the cell surface with high resolution using over a hundred different illumination angles. Theoretically, the presented TIRFM setup and 3-D reconstruction method can achieve 40 nm axial resolution in experimental conditions where SNR is as low as 2, with 35 different illumination angles. Moreover, our system and reconstruction method have the potential to be used in live cells to track membrane dynamics in 3-D.

  5. Development of a total reflection X-ray fluorescence spectrometer for ultra-trace element analysis

    Indian Academy of Sciences (India)

    M K Tiwari; B Gowrishankar; V K Raghuvanshi; R V Nandedkar; K J S Sawhney

    2002-10-01

    A simple and fairly inexpensive total reflection X-ray fluorescence (TXRF) spectrometer has been designed, constructed and realized. The spectrometer is capable of ultra-trace multielement analysis as well as performs surface characterization of thin films. The TXRF setup comprises of an X-ray generator, a slitcollimator arrangement, a monochromator/cutoff-stage, a sample reflector stage and an X-ray detection system. The glancing angle of incidence on the two reflectors is implemented using a sine-bar mechanism that enables precise angle adjustments. An energy dispersive detector and a GM counter are employed for measuring respectively the fluorescence intensities and the direct X-ray beam intensity. A Cu-target X-ray generator with its line focus window is used as an excitation source. The spectrometer is quite portable with its compact design and use of a peltier cooled solid state detector for energy dispersive detection. Alignment and characterization of the TXRF system has been performed and the minimum detection limits for various elements have been determined to be in the range of 100 pg to 5 ng even at low X-ray generator powers of 30 kV, 5 mA. The capability of the TXRF system developed for thin film characterization is also demonstrated.

  6. Radio-frequency Attenuation Length, Basal-Reflectivity, Depth, and Polarization Measurements from Moore's Bay in the Ross Ice-Shelf

    CERN Document Server

    Barwick, S W; Besson, D; Duffin, T; Hanson, J C; Klein, S R; Kleinfelder, S A; Reed, C; Roumi, M; Stezelberger, T; Tatar, J; Walker, J; Zou, L

    2014-01-01

    Radio-glaciological parameters from Moore's Bay, in the Ross Ice Shelf, have been measured. The thickness of the ice shelf in Moore's Bay was measured from reflection times of radio-frequency pulses propagating vertically through the shelf and reflecting from the ocean. The average depth obtained is $576\\pm8$ m. The temperature-averaged attenuation length of the ice column, $\\langle L \\rangle$, is derived from the returned power assuming 100\\% reflection. A linear fit to the data yields $\\langle L(\

  7. Real-time monitoring of NKCC2 endocytosis by total internal reflection fluorescence (TIRF) microscopy.

    Science.gov (United States)

    Jaykumar, Ankita Bachhawat; Caceres, Paulo S; Sablaban, Ibrahim; Tannous, Bakhos A; Ortiz, Pablo A

    2016-01-15

    The apical Na-K-2Cl cotransporter (NKCC2) mediates NaCl reabsorption by the thick ascending limb (TAL). The amount of NKCC2 at the apical membrane of TAL cells is determined by exocytic delivery, recycling, and endocytosis. Surface biotinylation allows measurement of NKCC2 endocytosis, but it has low time resolution and does not allow imaging of the dynamic process of endocytosis. We hypothesized that total internal reflection fluorescence (TIRF) microscopy imaging of labeled NKCC2 would allow monitoring of NKCC2 endocytosis in polarized Madin-Darby canine kidney (MDCK) and TAL cells. Thus we generated a NKCC2 construct containing a biotin acceptor domain (BAD) sequence between the transmembrane domains 5 and 6. Once expressed in polarized MDCK or TAL cells, surface NKCC2 was specifically biotinylated by exogenous biotin ligase (BirA). We also demonstrate that expression of a secretory form of BirA in TAL cells induces metabolic biotinylation of NKCC2. Labeling biotinylated surface NKCC2 with fluorescent streptavidin showed that most apical NKCC2 was located within small discrete domains or clusters referred to as "puncta" on the TIRF field. NKCC2 puncta were observed to disappear from the TIRF field, indicating an endocytic event which led to a decrease in the number of surface puncta at a rate of 1.18 ± 0.16%/min in MDCK cells, and a rate 1.09 ± 0.08%/min in TAL cells (n = 5). Treating cells with a cholesterol-chelating agent (methyl-β-cyclodextrin) completely blocked NKCC2 endocytosis. We conclude that TIRF microscopy of labeled NKCC2 allows the dynamic imaging of individual endocytic events at the apical membrane of TAL cells.

  8. Study of antibody/antigen binding kinetics by total internal reflection ellipsometry.

    Science.gov (United States)

    Baleviciute, Ieva; Balevicius, Zigmas; Makaraviciute, Asta; Ramanaviciene, Almira; Ramanavicius, Arunas

    2013-01-15

    Total internal reflection ellipsometry (TIRE) has been applied for the investigation of (i) kinetics of biosensing layer formation, which was based on the immobilization of fragmented and intact antibodies, and (ii) kinetics of antigen interaction with the immobilized antibodies. It has been demonstrated that ellipsometric parameter Δ(t) showed much higher sensitivity at the initial phase of Au-protein and protein-protein interaction, while the parameter Ψ(t) was more sensitive when the steady-state conditions were established. A new method, which taking into consideration this feature and nonlinear change of Δ(t) and Ψ(t) parameters during various stages of biological layer formation process, was used for the calculation of antibody and antigen adsorption/interaction kinetics. The obtained results were analyzed using a model, which took into account partial reversibility during the formation of both antibody and antigen based monolayers. It was shown that the immobilization rate of antibody during the preparation of the sensing layer was similar for the formation of both intact and fragmented antibody based layers; however, the residence time was 25 times longer for intact antibody based layer formation in comparison to that of fragmented antibody based layer formation. On the contrary, residence time of antigen interaction with immobilized antibodies was about 8 times longer for the sensor based on fragmented antibodies. Moreover, it has been determined that the structural differences of immobilized antibodies (fragmented or intact) significantly influence antibody-antigen interaction rate, the major difference being in the residence time of antigen interaction with both types of immobilized antibodies.

  9. Sensitivity Studies for Space-based Measurement of Atmospheric Total Column Carbon Dioxide Using Reflected Sunlight

    Science.gov (United States)

    Mao, Jianping; Kawa, S. Randolph

    2003-01-01

    A series of sensitivity studies is carried out to explore the feasibility of space-based global carbon dioxide (CO2) measurements for global and regional carbon cycle studies. The detection method uses absorption of reflected sunlight in the CO2 vibration-rotation band at 1.58 microns. The sensitivities of the detected radiances are calculated using the line-by-line model (LBLRTM), implemented with the DISORT (Discrete Ordinates Radiative Transfer) model to include atmospheric scattering in this band. The results indicate that (a) the small (approx.1%) changes in CO2 near the Earth's surface are detectable in this CO2 band provided adequate sensor signal-to-noise ratio and spectral resolution are achievable; (b) the radiance signal or sensitivity to CO2 change near the surface is not significantly diminished even in the presence of aerosols and/or thin cirrus clouds in the atmosphere; (c) the modification of sunlight path length by scattering of aerosols and cirrus clouds could lead to large systematic errors in the retrieval; therefore, ancillary aerosol/cirrus cloud data are important to reduce retrieval errors; (d) CO2 retrieval requires good knowledge of the atmospheric temperature profile, e.g. approximately 1K RMS error in layer temperature; (e) the atmospheric path length, over which the CO2 absorption occurs, must be known in order to correctly interpret horizontal gradients of CO2 from the total column CO2 measurement; thus an additional sensor for surface pressure measurement needs to be attached for a complete measurement package.

  10. Membrane order parameters for interdigitated lipid bilayers measured via polarized total-internal-reflection fluorescence microscopy.

    Science.gov (United States)

    Ngo, An T; Jakubek, Zygmunt J; Lu, Zhengfang; Joós, Béla; Morris, Catherine E; Johnston, Linda J

    2014-11-01

    Incorporating ethanol in lipid membranes leads to changes in bilayer structure, including the formation of an interdigitated phase. We have used polarized total-internal-reflection fluorescence microscopy (pTIRFM) to measure the order parameter for Texas Red DHPE incorporated in the ethanol-induced interdigitated phase (LβI) formed from ternary lipid mixtures comprising dioleoylphosphatidylcholine, cholesterol and egg sphingomyelin or dipalmitoylphosphatidylcholine. These lipid mixtures have 3 co-existing phases in the presence of ethanol: liquid-ordered, liquid-disordered and LβI. pTIRFM using Texas Red DHPE shows a reversal in fluorescence contrast between the LβI phase and the surrounding disordered phase with changes in the polarization angle. The contrast reversal is due to changes in the orientation of the dye, and provides a rapid method to identify the LβI phase. The measured order parameters for the LβI phase are consistent with a highly ordered membrane environment, similar to a gel phase. An acyl-chain labeled BODIPY-FL-PC was also tested for pTIRFM studies of ethanol-treated bilayers; however, this probe is less useful since the order parameters of the interdigitated phase are consistent with orientations that are close to random, either due to local membrane disorder or to a mixture of extended and looping conformations in which the fluorophore is localized in the polar headgroup region of the bilayer. In summary, we demonstrate that order parameter measurements via pTIRFM using Texas Red-DHPE can rapidly identify the interdigitated phase in supported bilayers. We anticipate that this technique will aid further research in the effects of alcohols and other additives on membranes.

  11. Adhesion of living cells revealed by variable-angle total internal reflection fluorescence microscopy (Conference Presentation)

    Science.gov (United States)

    Cardoso Dos Santos, Marcelina; Vézy, Cyrille; Jaffiol, Rodolphe

    2016-02-01

    Total Internal Reflection Fluorescence Microscopy (TIRFM) is a widespread technique to study cellular process occurring near the contact region with the glass substrate. In this field, determination of the accurate distance from the surface to the plasma membrane constitutes a crucial issue to investigate the physical basis of cellular adhesion process. However, quantitative interpretation of TIRF pictures regarding the distance z between a labeled membrane and the substrate is not trivial. Indeed, the contrast of TIRF images depends on several parameters more and less well known (local concentration of dyes, absorption cross section, angular emission pattern…). The strategy to get around this problem is to exploit a series of TIRF pictures recorded at different incident angles in evanescent regime. This technique called variable-angle TIRF microscopy (vaTIRFM), allowing to map the membrane-substrate separation distance with a nanometric resolution (10-20 nm). vaTIRFM was developed by Burmeister, Truskey and Reichert in the early 1990s with a prism-based TIRF setup [Journal of Microscopy 173, 39-51 (1994)]. We propose a more convenient prismless setup, which uses only a rotatable mirror to adjust precisely the laser beam on the back focal plane of the oil immersion objective (no azimuthal scanning is needed). The series of TIRF images permit us to calculate accurately membrane-surface distances in each pixel. We demonstrate that vaTIRFM are useful to quantify the adhesion of living cells for specific and unspecific membrane-surface interactions, achieved on various functionalized substrates with polymers (BSA, poly-L-lysin) or extracellular matrix proteins (collagen and fibronectin).

  12. Semiconductor applications of nanoliter droplet methodology with total reflection x-ray fluorescence analysis

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Thomasin C.; Sparks, Christopher M.; Havrilla, George J. E-mail: havrilla@lanl.gov; Beebe, Meredith R

    2004-08-31

    In this study, the nanoliter dried spot method was applied to semiconductor contamination analysis to enhance vapor phase decomposition processes with total reflection X-ray fluorescence detection. Nanoliter-sized droplets (10 and 50 nl) were deposited onto native silicon oxide wafer surfaces in a clean room environment from both single and multielemental standards containing various concentrations of iron in different matrices. Direct comparisons were made to droplets formed by conventional VPD with similar iron standards. Nanoliter dried spots could be reproducibly deposited and dried in air with typical drying times ranging from 20 s to 2 min depending on the nanoliter volume deposited, compared to VPD spots which have drying times ranging from tens of minutes to several hours. Both types of residues showed a linear relationship between Fe intensity and mass deposited. Variable angle experiments showed that both nanoliter and VPD deposits of single element standards were film-like in character, while residues formed from much more complex matrices and higher mass loadings were particulate in character. For the experimental conditions used in this study (30 kV, 100 mA), typical TXRF spectral Fe limits of detection were calculated to be on the order of picograms or {approx}1x10{sup 10} atoms/cm{sup 2} for a 0.8 cm{sup 2} X-ray excitation beam area for both nanoliter dried spots and VPD spots prepared from single elemental standards. Calculated Fe detection limits for 200 mm diameter silicon wafers used in this study were in the {approx}1x10{sup 8} atoms/cm{sup 2} range. By using nanoliter sized droplets, the required sample volume is greatly reduced resulting in higher sample throughput than with conventional VPD methods.

  13. Design of an optical lens combined with a total internal reflection (TIR) freeform surface for a LED front fog lamp

    Science.gov (United States)

    Wang, Hong; Li, Xiufeng; Ge, Peng

    2017-02-01

    We propose a design method of an optical lens combined with a total internal reflection (TIR) freeform surface for a LED front fog lamp. The TIR freeform surface controls the edge rays of the LED source. It totally reflects the edge rays and makes them emit from the top surface of the lens. And the middle rays of the LED source go through the refractive surface and reach the measured plane. We simulate the model by Monte Carlo method. Simulation results show that the front fog lamp system can satisfy the requirement of ECE R19 Rev7. The light control efficiency can reach up to 76%.

  14. Characterization of urban air pollution by total reflection X-ray fluorescence*1

    Science.gov (United States)

    Schmeling, Martina

    2004-08-01

    Besides photochemical smog, particulate air pollution is a constantly growing problem in urban areas. The particulate matter present in pollution events contains often toxic or health impacting elements and is responsible for low visibility, might be triggering respiratory diseases like asthma, and can play an important role in formation or duration of smog events. To characterize particulate pollution in two different cities, samples were taken during intensive field campaigns in Chicago, IL, in 2002 and Phoenix, AZ, in 2001. Both cities experience regularly photochemical smog events as well as particulate pollution, but show very different meteorological and topographical conditions. Therefore it is expected that the particulate composition varies significantly, providing information about different pollution forms. Sampling took place in both cases at elevated locations and had a temporal resolution of 1.5 h and 1 h, respectively. The samples were analyzed by total reflection X-ray fluorescence after digestion of the filter matrix. As expected the elemental composition of particulate matter varied between both cities substantially with Phoenix showing a higher abundance of crustal elements, and Chicago enrichment in anthropogenically produced ones. In both cities diurnal patterns were found, exerting maxima in the morning and minima in the early afternoon. The diurnal pattern was much more regularly and also more strongly pronounced in Phoenix. Phoenix's valley location permits for a more stable nocturnal boundary layer to build up during the night thus trapping particulates efficiently during this time, until mixing occurs in the early morning hours and the residual layer lifts. In Chicago, the diurnal variation was less extreme, but another pattern determines the situation with the lake breeze. The lake breeze corresponds to a shift in wind direction towards the east, i.e. from Lake Michigan during the late morning. It was found that certain elemental species

  15. Goos-Hänchen shift of a transmitted light beam in frustrated total internal reflection for moderately large gap widths

    Science.gov (United States)

    Bocharov, A. A.

    2017-04-01

    Goos-Hänchen shift of transmitted light beam is studied in frustrated total internal reflection for moderately large gap widths. The traditional Artmann's formula is shown to be inapplicable in this case. An alternative approach of this value calculation is proposed. The presented result corresponds to the intuitively expected limit dependencies on the problem parameters.

  16. Development of off-line layer chromatographic and total reflection X-ray fluorescence spectrometric methods for arsenic speciation

    Energy Technology Data Exchange (ETDEWEB)

    Mihucz, Victor G. [Joint Research Group of Environmental Chemistry of Hungarian Academy of Sciences and L. Eoetvoes University, P. O. Box 32, H-1518 Budapest (Hungary); Hungarian Satellite Centre of Trace Elements Institute to UNESCO, P. O. Box 32, H-1518 Budapest (Hungary); Moricz, Agnes M. [L. Eoetvoes University, Department of Chemical Technology and Environmental Chemistry, P.O. Box 32, H-1518 Budapest (Hungary); Kroepfl, Krisztina [Joint Research Group of Environmental Chemistry of Hungarian Academy of Sciences and L. Eoetvoes University, P. O. Box 32, H-1518 Budapest (Hungary); Szikora, Szilvia [Joint Research Group of Environmental Chemistry of Hungarian Academy of Sciences and L. Eoetvoes University, P. O. Box 32, H-1518 Budapest (Hungary); Tatar, Eniko [Hungarian Satellite Centre of Trace Elements Institute to UNESCO, P. O. Box 32, H-1518 Budapest (Hungary); L. Eoetvoes University, Department of Inorganic and Analytical Chemistry, P.O. Box 32, H-1518 Budapest (Hungary); Parra, Lue Meru Marco [Universidad Centro-occidental Lisandro Alvarado, Decanato de Agronomia, Departamento de Quimica y Suelos Unidad de Analisis Instrumental, Apartado Postal 4076, Cabudare 3023 (Venezuela); Zaray, Gyula [Joint Research Group of Environmental Chemistry of Hungarian Academy of Sciences and L. Eoetvoes University, P. O. Box 32, H-1518 Budapest (Hungary) and Hungarian Satellite Centre of Trace Elements Institute to UNESCO, P. O. Box 32, H-1518 Budapest (Hungary) and L. Eoetvoes University, Department of Inorganic and Analytical Chemistry, P.O. Box 32, H-1518 Budapest (Hungary)]. E-mail: zaray@ludens.elte.hu

    2006-11-15

    Rapid and low cost off-line thin layer chromatography-total reflection X-ray fluorescence spectrometry and overpressured thin layer chromatography-total reflection X-ray fluorescence spectrometry methods have been developed for separation of 25 ng of each As(III), As(V), monomethyl arsonic acid and dimethylarsinic acid applying a PEI cellulose stationary phase on plastic sheets and a mixture of acetone/acetic acid/water = 2:1:1 (v/v/v) as eluent system. The type of eluent systems, the amounts (25-1000 ng) of As species applied to PEI cellulose plates, injection volume, development distance, and flow rate (in case of overpressured thin layer chromatography) were taken into consideration for the development of the chromatographic separation. Moreover, a microdigestion method employing nitric acid for the As spots containing PEI cellulose scratched from the developed plates divided into segments was developed for the subsequent total reflection X-ray fluorescence spectrometry analysis. The method was applied for analysis of root extracts of cucumber plants grown in As(III) containing modified Hoagland nutrient solution. Both As(III) and As(V) were detected by applying the proposed thin layer chromatography/overpressured thin layer chromatography-total reflection X-ray fluorescence spectrometry methods.

  17. A plastic total internal reflection-based photoluminescence device for enzymatic biosensors

    Science.gov (United States)

    Thakkar, Ishan G.

    Growing concerns for quality of water, food and beverages in developing and developed countries drive sizeable markets for mass-producible, low cost devices that can measure the concentration of contaminant chemicals in water, food, and beverages rapidly and accurately. Several fiber-optic enzymatic biosensors have been reported for these applications, but they exhibit very strong presence of scattered excitation light in the signal for sensing, requiring expensive thin-film filters, and their non-planar structure makes them challenging to mass-produce. Several other planar optical waveguide-based biosensors prove to be relatively costly and more fragile due to constituent materials and the techniques involved in their fabrication. So, a plastic total internal reflection (TIR)-based low cost, low scatter, field-portable device for enzymatic biosensors is fabricated and demonstrated. The design concept of the TIR-based photoluminescent enzymatic biosensor device is explained. An analysis of economical materials with appropriate optical and chemical properties is presented. PMMA and PDMS are found to be appropriate due to their high chemical resistance, low cost, high optical transmittance and low auto-fluorescence. The techniques and procedures used for device fabrication are discussed. The device incorporated a PMMA-based optical waveguide core and PDMS-based fluid cell with simple multi-mode fiber-optics using cost-effective fabrication techniques like molding and surface modification. Several techniques of robustly depositing photoluminescent dyes on PMMA core surface are discussed. A pH-sensitive fluorescent dye, fluoresceinamine, and an O2-sensitive phosphorescent dye, Ru(dpp) both are successfully deposited using Si-adhesive gel-based as well as HydroThane-based deposition methods. Two different types of pH-sensors using two different techniques of depositing fluoresceinamine are demonstrated. Also, the effect of concentration of fluoresceinamine-dye molecules

  18. Grazing incidence reflectivity and total electron yield effects in soft x-ray absorption spectroscopy

    NARCIS (Netherlands)

    Alders, D; Hibma, T; Sawatzky, G.A; Cheung, K.C.; van Dorssen, G.E.; Roper, M.D.; Padmore, H.A.; van der Laan, G.; Vogel, J; Sacchi, M.

    1997-01-01

    We report on a study of grazing incidence absorption and reflection spectra of NiO in the region of the Ni 2p edge. The aim is to evaluate the distortion of the near edge spectrum by the critical angle behavior of individual components within the spectrum. This can be used to improve the separation

  19. Eplerenone attenuates pulse wave reflection in chronic kidney disease stage 3-4--a randomized controlled study.

    Directory of Open Access Journals (Sweden)

    Lene Boesby

    Full Text Available BACKGROUND: Patients with chronic kidney disease (CKD have high cardiovascular mortality and morbidity associated with increased arterial stiffness. Plasma aldosterone levels are increased in CKD, and aldosterone has been found to increase vascular inflammation and fibrosis. It was hypothesized that aldosterone receptor inhibition with eplerenone could reduce arterial stiffness in CKD stage 3-4. STUDY DESIGN: The design was randomized, open, parallel group. Measurements of arterial stiffness markers were undertaken at weeks 1 and 24. INTERVENTION: 24 weeks of add-on treatment with 25-50 mg eplerenone or standard medication. OUTCOMES: Primary outcome parameter was carotid-femoral pulse wave velocity (cfPWV. Secondary outcomes were augmentation index (AIx, ambulatory arterial stiffness index (AASI and urinary albumin excretion. RESULTS: Fifty-four CKD patients (mean eGFR 36 mL/min/1.73 m(2, SD 11 were randomized. Forty-six patients completed the trial. The mean difference in cfPWV changes between groups was 0.1 m/s (95%CI: -1.0, 1.3, P = 0.8. The mean difference in AIx changes between groups was 4.4% (0.1, 8.6, P = 0.04. AASI was unchanged in both groups. The ratio of change in urinary albumin excretion in the eplerenone group compared to the control was 0.61 (0.37, 1.01, P = 0.05. Four patients were withdrawn from the eplerenone group including three because of possible side effects; one was withdrawn from the control group. Mild hyperkalemia was seen on three occasions and was easily managed. LIMITATIONS: The full planned number of patients was not attained. The duration of the trial may have been too short to obtain full effect of eplerenone on the arteries. CONCLUSIONS: Add-on treatment with eplerenone in CKD stage 3-4 did not significantly reduce cfPWV. There may be beneficial vascular effects leading to attenuated pulse wave reflection. Treatment was well-tolerated. TRIAL REGISTRATION: ClinicalTrials.govNCT01100203.

  20. Total reflection X-ray fluorescence trace mercury determination by trapping complexation: Application in advanced oxidation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Custo, Graciela [Unidad de Actividad Quimica, Comision Nacional de Energia Atomica, Av. Gral Paz 1499 (B1650KNA) San Martin, Buenos Aires (Argentina); Litter, Marta I. [Unidad de Actividad Quimica, Comision Nacional de Energia Atomica, Av. Gral Paz 1499 (B1650KNA) San Martin, Buenos Aires (Argentina); Escuela de Posgrado, Universidad de General San Martin, San Lorenzo 3391 Villa Ballester, 1653. Prov. de Buenos Aires (Argentina); Rodriguez, Diana [Universidad Nacional de Lujan, Ruta 5 y 7. Prov. de Buenos Aires (Argentina); Vazquez, Cristina [Unidad de Actividad Quimica, Comision Nacional de Energia Atomica, Av. Gral Paz 1499 (B1650KNA) San Martin, Buenos Aires (Argentina) and Laboratorio de Quimica de Sistemas Heterogeneos, Facultad de Ingenieria, Universidad de Buenos Aires, P. Colon 850 (C1063ACU), Buenos Aires (Argentina)]. E-mail: Cristina.Vazquez@cnea.gov.ar

    2006-11-15

    It is well known that Hg species cause high noxious effects on the health of living organisms even at very low levels (5 {mu}g/L). Quantification of this element is an analytical challenge due to the peculiar physicochemical properties of all Hg species. The regulation of the maximal allowable Hg concentration led to search for sensitive methods for its determination. Total reflection X-ray fluorescence is a proved instrumental analytical tool for the determination of trace elements. In this work, the use of total reflection X-ray fluorescence for Hg quantification is investigated. However, experimental determination by total reflection X-ray fluorescence requires depositing a small volume of sample on the reflector and evaporation of the solvent until dryness to form a thin film. Because of volatilization of several Hg forms, a procedure to capture these volatile species in liquid samples by using complexing agents is proposed. Acetate, oxalic acid, ethylenediaminetetracetic acid and ammonium pyrrolidine-dithiocarbamate were assayed for trapping the analytes into the solution during the preparation of the sample and onto the reflector during total reflection X-ray fluorescence measurements. The proposed method was applied to evaluate Hg concentration during TiO{sub 2}-heterogeneous photocatalysis, one of the most known advanced oxidation technologies. Advanced oxidation technologies are processes for the treatment of effluents in waters and air that involve the generation of very active oxidative and reductive species. In heterogeneous photocatalysis, Hg is transformed to several species under ultraviolet illumination in the presence of titanium dioxide. Total reflection X-ray fluorescence was demonstrated to be applicable in following the extent of the heterogeneous photocatalysis reaction by determining non-transformed Hg in the remaining solution.

  1. Total reflection X-ray fluorescence trace mercury determination by trapping complexation: Application in advanced oxidation technologies

    Science.gov (United States)

    Custo, Graciela; Litter, Marta I.; Rodríguez, Diana; Vázquez, Cristina

    2006-11-01

    It is well known that Hg species cause high noxious effects on the health of living organisms even at very low levels (5 μg/L). Quantification of this element is an analytical challenge due to the peculiar physicochemical properties of all Hg species. The regulation of the maximal allowable Hg concentration led to search for sensitive methods for its determination. Total reflection X-ray fluorescence is a proved instrumental analytical tool for the determination of trace elements. In this work, the use of total reflection X-ray fluorescence for Hg quantification is investigated. However, experimental determination by total reflection X-ray fluorescence requires depositing a small volume of sample on the reflector and evaporation of the solvent until dryness to form a thin film. Because of volatilization of several Hg forms, a procedure to capture these volatile species in liquid samples by using complexing agents is proposed. Acetate, oxalic acid, ethylenediaminetetracetic acid and ammonium pyrrolidine-dithiocarbamate were assayed for trapping the analytes into the solution during the preparation of the sample and onto the reflector during total reflection X-ray fluorescence measurements. The proposed method was applied to evaluate Hg concentration during TiO 2-heterogeneous photocatalysis, one of the most known advanced oxidation technologies. Advanced oxidation technologies are processes for the treatment of effluents in waters and air that involve the generation of very active oxidative and reductive species. In heterogeneous photocatalysis, Hg is transformed to several species under ultraviolet illumination in the presence of titanium dioxide. Total reflection X-ray fluorescence was demonstrated to be applicable in following the extent of the heterogeneous photocatalysis reaction by determining non-transformed Hg in the remaining solution.

  2. Total Internal Reflection Ultrasonic Sensor for Detection of Subsurface Flaws: Research into Underlying Physics

    Science.gov (United States)

    2014-11-24

    from 1 September 2012 to 31 August 2014 Air Force Research Laboratory Air Force Office of Scientific Research European Office of Aerospace...wave and ray vectors. 11.5 Displacement of an Ultrasonic Beam Optical visualisation of reflection of the SH-wave type pulse from the inclined face...Photoelastic Technique,” Journal of Nondestructive Evaluation, vol. 4, no. 2, pp. 65-73, 1984. [12] E. Ginzel, “Photoelastic Visualisation of Ultrasonic

  3. Controllable transmission and total reflection through an impedance-matched acoustic metasurface

    KAUST Repository

    Mei, Jun

    2014-12-02

    A general design paradigm for a novel type of acoustic metasurface is proposed by introducing periodically repeated supercells on a rigid thin plate, where each supercell contains multiple cut-through slits that are filled with materials possessing different refractive indices but the same impedance as that of the host medium. When the wavelength of the incident wave is smaller than the periodicity, the direction of the transmitted wave with nearly unity transmittance can be chosen by engineering the phase discontinuities along the transverse direction. When the wavelength is larger than the periodicity, even though the metasurface is impedance matched to the host medium, most of the incident energy is reflected back and the remaining portion is converted into a surface-bound mode. We show that both the transmitted wave control and the high reflection with the surface mode excitation can be interpreted by a unified analytic model based on mode-coupling theory. Our general design principle not only supplies the functionalities of reflection-type acoustic metasurfaces, but also exhibits unprecedented flexibility and efficiency in various domains of wave manipulation for possible applications in fields like refracting, collimating, focusing or absorbing wave energy.

  4. Analysis of Leucaena mimosine, Acacia tannins and total phenols by near infrared reflectance spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Prasad, M.N.V. [Hyderabad Univ. (India). Dept. of Plant Sciences

    1995-11-01

    The mimosine contents of Leucaena foliage, Acacia tannins and total phenols from leaf, bark and pod were analyzed by a near infrared relectance spectrophotometer (Compscan 3000). A calibration equation (linear summation regression) was developed with near infrared spectral analysis software, using 30 spectra from old and young leaves of Leucaena and 23 spectra from different samples of Acacia. The near infrared analyzer calculated that the percentages of mimosine, total phenols and tannins are closely comparable to laboratory results. (author)

  5. Botanical trash mixtures analyzed with near-infrared and attenuated total reflectance fourier transform spectroscopy and thermogravimetric analysis

    Science.gov (United States)

    Botanical cotton trash mixed with lint reduces cotton’s marketability and appearance. During cotton harvesting, ginning, and processing, trash size reduction occurs, thus complicating its removal and identification. This trash causes problems by increasing ends down in yarn formation and thus proce...

  6. ORIENTATION OF MOLECULAR GROUPS IN CROSS SECTION OF POLYAMIDE-6 FIBER BY INFRARED ATTENUATED TOTAL REFLECTION DICHROISM STUDIES

    Institute of Scientific and Technical Information of China (English)

    SHEN Deyan; ZHANG Shengqing

    1987-01-01

    The polymer fiber usually possess typical uniaxial orientation. The molecular chains are symmetrically distributed around fiber axis. In this work, the orientation of molecular groups in the cross section of polyamide-6 fiber has been measured by using IR ATR method. The results indicated that the polyamide-6fiber mainly contains α-crystalline form. The direction of hydrogen bonds of amide groups is predominately parallel with the surface in the cross section of the fiber.

  7. Use of Attenuated Total Reflectance Mid-Infrared Spectroscopy for Rapid Prediction of Amino Acids in Chinese Rice Wine.

    Science.gov (United States)

    Wu, Zhengzong; Xu, Enbo; Long, Jie; Wang, Fang; Xu, Xueming; Jin, Zhengyu; Jiao, Aiquan

    2015-08-01

    The high content of amino acids of Chinese rice wine (CRW), especially essential amino acids makes it a food increasingly demanded by consumers. Rapid detection technique of amino acid content, which is an important quality and function index of CRW, is highly desirable for consumers, producers as well as administrative authorities. In this study, the potential of Fourier transform infrared spectroscopy (FT-IR) as a novel and rapid analytical technique to determine 17 free amino acids in CRW were investigated. Genetic algorithms (GA) and synergy interval partial least squares (SiPLS) were used to select the most efficient spectral variables to improve the prediction precision of the classic partial least squares (PLS) model constructed on the full-spectrum. The results demonstrated that compared with the PLS model using all wavelengths of FT-IR spectra, the prediction precision of model based on the spectral variables selected by GA and SiPLS was significantly improved, especially for arginine and proline. After systemic comparison and discussion, it was found that GA-SiPLS model achieved the best performance, with the correlation coefficient in calibration (R(2) (cal)) higher than 0.80 and the residual predictive deviation higher than 2.00 for all of the free amino acids analyzed in this study. The overall results confirmed that FT-IR combined with efficient variable selection algorithms is a method that may be useful to replace the traditional methods for routine analysis of free amino acids in CRW.

  8. Rapid evaluation and quantitative analysis of eugenol derivatives in essential oils and cosmetic formulations on human skin using attenuated total reflectance–infrared spectroscopy

    OpenAIRE

    Wang, Lai-Hao; Sung, Wei-Chien

    2011-01-01

    We studied the fragrances 4-allylbenzenes (eugenol, methyl eugenol, acetyl eugenol) as well as 4-propenylbenzenes (isoeugenol) in commercial essential oils using a fast and nondestructive attenuated total reflectance–infrared (ATR–IR) spectroscopy method. The method was based on ATR–IR utilizing partial least square regression. The calibrations were modeled in the characteristic region for eugenol (1430–1432 cm−1), isoeugenol (960–970 cm−1) and methyl eugenol (803–807 cm−1). The models were t...

  9. Total Reducing Capacity in Aquifer Minerals and Sediments: Quantifying the Potential to Attenuate Cr(VI) in Groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Sisman, S. Lara [Univ. of Virginia, Charlottesville, VA (United States); Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-07-20

    Hexavalent chromium, Cr(VI), is present in the environment as a byproduct of industrial processes. Due to its mobility and toxicity, it is crucial to attenuate or remove Cr(VI) from the environment. The objective of this investigation was to quantify potential natural attenuation, or reduction capacity, of reactive minerals and aquifer sediments. Samples of reduced-iron containing minerals such as ilmenite, as well as Puye Formation sediments representing a contaminated aquifer in New Mexico, were reacted with chromate. The change in Cr(VI) during the reaction was used to calculate reduction capacity. This study found that minerals that contain reduced iron, such as ilmenite, have high reducing capacities. The data indicated that sample history may impact reduction capacity tests due to surface passivation. Further, this investigation identified areas for future research including: a) refining the relationships between iron content, magnetic susceptibility and reduction capacity, and b) long term kinetic testing using fresh aquifer sediments.

  10. Effect of weight fraction of different constituent elements on the total mass attenuation coefficients of biological materials

    Indian Academy of Sciences (India)

    Karamjit Singh; Charanjeet Singh; Parjit S Singh; Gurmel S Mudahar

    2002-07-01

    The mass attenuation coefficients, m, of biological materials have been studied as a function of weight fraction of constituent elements (hydrogen, carbon, oxygen and nitrogen). A considerable change in m is seen only in low energy region whereas no change is observed with the increasing percentage of constituent elements in high energy region up to 10 MeV. The results have been presented in graphical form.

  11. On the tunneling of full-vector X-Waves through a slab under frustrated total reflection condition

    KAUST Repository

    Salem, Mohamed

    2012-07-01

    Tunneling of full-vector X-Waves through a dielectric slab under frustrated total reflection condition is investigated. Full-vector X-Waves are obtained by superimposing transverse electric and magnetic polarization components, which are derived from the scalar X-Wave solution. The analysis of reflection and transmission at the dielectric interfaces is carried out analytically in a straightforward fashion using vector Bessel beam expansion. Investigation of the fields propagating away from the farther end of the slab (transmitted fields) shows an advanced (superluminal) transmission of the X-Wave peak. Additionally, a similar advanced reflection is also observed. The apparent tunneling of the peak is shown to be due to the phase shift in the fields\\' spectra and not to be causally related to the incident peak. © 2012 IEEE.

  12. An Evaluation of Total Solar Reflectance and Spectral Band Ratioing Techniques for Estimating Soil Water Content

    Science.gov (United States)

    Reginato, R. J.; Vedder, J. F.; Idso, S. B.; Jackson, R. D.; Blanchard, M. B.; Goettelman, R.

    1977-01-01

    For several days in March of 1975, reflected solar radiation measurements were obtained from smooth and rough surfaces of wet, drying, and continually dry Avondale loam at Phoenix, Arizona, with pyranometers located 50 cm above the ground surface and a multispectral scanner flown at a 300-m height. The simple summation of the different band radiances measured by the multispectral scanner proved equally as good as the pyranometer data for estimating surface soil water content if the multispectral scanner data were standardized with respect to the intensity of incoming solar radiation or the reflected radiance from a reference surface, such as the continually dry soil. Without this means of standardization, multispectral scanner data are most useful in a spectral band ratioing context. Our results indicated that, for the bands used, no significant information on soil water content could be obtained by band ratioing. Thus the variability in soil water content should insignificantly affect soil-type discrimination based on identification of type-specific spectral signatures. Therefore remote sensing, conducted in the 0.4- to 1.0-micron wavelength region of the solar spectrum, would seem to be much More suited to identifying crop and soil types than to estimating of soil water content.

  13. Characterization of atmospheric aerosols using Synchroton radiation total reflection X-ray fluorescence and Fe K-edge total reflection X-ray fluorescence-X-ray absorption near-edge structure

    Energy Technology Data Exchange (ETDEWEB)

    Fittschen, U.E.A. [Department of Chemistry, University of Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany)], E-mail: ursula.fittschen@chemie.uni-hamburg.de; Meirer, F. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Wien (Austria)], E-mail: fmeirer@ati.ac.at; Streli, C. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Wien (Austria)], E-mail: streli@ati.ac.at; Wobrauschek, P. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Wien (Austria)], E-mail: wobi@ati.ac.at; Thiele, J. [Department of Chemistry, University of Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany)], E-mail: Julian.Thiele@gmx.de; Falkenberg, G. [Hamburger Synchrotronstrahlungslabor at Deutsches Elektronen-Synchrotron DESY, Notkestr. 85, 22603 Hamburg (Germany)], E-mail: falkenbe@mail.desy.de; Pepponi, G. [ITC-irst, Via Sommarive 18, 38050 Povo (Trento) (Italy)], E-mail: pepponi@itc.it

    2008-12-15

    In this study a new procedure using Synchrotron total reflection X-ray fluorescence (SR-TXRF) to characterize elemental amounts in atmospheric aerosols down to particle sizes of 0.015 um is presented. The procedure was thoroughly evaluated regarding bounce off effects and blank values. Additionally the potential of total reflection X-ray fluorescence-X-ray absorption near edge structure (SR-TXRF-XANES) for speciation of FeII/III down to amounts of 34 pg in aerosols which were collected for 1 h is shown. The aerosols were collected in the city of Hamburg with a low pressure Berner impactor on Si carriers covered with silicone over time periods of 60 and 20 min each. The particles were collected in four and ten size fractions of 10.0-8.0 {mu}m, 8.0-2.0 {mu}m, 2.0-0.13 {mu}m 0.13-0.015 {mu}m (aerodynamic particle size) and 15-30 nm, 30-60 nm, 60-130 nm, 130-250 nm, 250-500 nm, 0.5-1 {mu}m, 1-2 {mu}m, 2-4 {mu}m, 4-8 {mu}m, 8-16 {mu}m. Prior to the sampling 'bounce off' effects on Silicone and Vaseline coated Si carriers were studied with total reflection X-ray fluorescence. According to the results silicone coated carriers were chosen for the analysis. Additionally, blank levels originating from the sampling device and the calibration procedure were studied. Blank levels of Fe corresponded to 1-10% of Fe in the aerosol samples. Blank levels stemming from the internal standard were found to be negligible. The results from the Synchroton radiation total reflection X-ray fluorescence analysis of the aerosols showed that 20 min of sampling time gave still enough sample material for elemental determination of most elements. For the determination of the oxidation state of Fe in the aerosols different Fe salts were prepared as a reference from suspensions in isopropanol. The results from the Fe K-edge Synchroton radiation total reflection X-ray fluorescence-X-ray absorption near-edge structure analysis of the aerosol samples showed that mainly Fe(III) was present in

  14. Analysis of total and dissolved heavy metals in surface water of a Mexican polluted river by total reflection X-ray fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Zarazua, G. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico)]. E-mail: gzo@nuclear.inin.mx; Avila-Perez, P. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico); Tejeda, S. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico); Barcelo-Quintal, I. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico); Martinez, T. [Universidad Nacional Autonoma de Mexico, Facultad de Quimica, Mexico, D.F. (Mexico)

    2006-11-15

    The present area of study is located in the Upper Course of the Lerma River (UCLR). The Lerma is one of the most important rivers of Mexico, where it drains highly populated and industrialized regions. The aim of the present study is to determine the heavy metal concentration of Cr, Mn, Fe, Cu and Pb in dissolved and total phases of the UCLR by means of Total Reflection X-ray Fluorescence Spectrometry (TXRF). The surface water samples were collected at 8 sites distributed following the stream flow direction of the river. Four sampling campaigns were carried out in each site in a 1-year period. A sample preparation method was applied in order to obtain the total and dissolved fraction and to destroy the organic matter. The total heavy metal average concentration decrease in the following order: Fe (2566 {mu}g/L) > Mn (300 {mu}g/L) > Cu (66 {mu}g/L) > Cr (21 {mu}g/L) > Pb (15 {mu}g/L). In general, the heavy metal concentrations in water of the UCLR are below the maximum permissible limits.

  15. Analysis of total and dissolved heavy metals in surface water of a Mexican polluted river by total reflection X-ray fluorescence spectrometry

    Science.gov (United States)

    Zarazua, G.; Ávila-Pérez, P.; Tejeda, S.; Barcelo-Quintal, I.; Martínez, T.

    2006-11-01

    The present area of study is located in the Upper Course of the Lerma River (UCLR). The Lerma is one of the most important rivers of Mexico, where it drains highly populated and industrialized regions. The aim of the present study is to determine the heavy metal concentration of Cr, Mn, Fe, Cu and Pb in dissolved and total phases of the UCLR by means of Total Reflection X-ray Fluorescence Spectrometry (TXRF). The surface water samples were collected at 8 sites distributed following the stream flow direction of the river. Four sampling campaigns were carried out in each site in a 1-year period. A sample preparation method was applied in order to obtain the total and dissolved fraction and to destroy the organic matter. The total heavy metal average concentration decrease in the following order: Fe (2566 μg/L) > Mn (300 μg/L) > Cu (66 μg/L) > Cr (21 μg/L) > Pb (15 μg/L). In general, the heavy metal concentrations in water of the UCLR are below the maximum permissible limits.

  16. Two-dimensional standing wave total internal reflection fluorescence microscopy: superresolution imaging of single molecular and biological specimens.

    Science.gov (United States)

    Chung, Euiheon; Kim, Daekeun; Cui, Yan; Kim, Yang-Hyo; So, Peter T C

    2007-09-01

    The development of high resolution, high speed imaging techniques allows the study of dynamical processes in biological systems. Lateral resolution improvement of up to a factor of 2 has been achieved using structured illumination. In a total internal reflection fluorescence microscope, an evanescence excitation field is formed as light is total internally reflected at an interface between a high and a low index medium. The excitation region resulting in low background fluorescence. We present even higher resolution wide-field biological imaging by use of standing wave total internal reflection fluorescence (SW-TIRF). Evanescent standing wave (SW) illumination is used to generate a sinusoidal high spatial frequency fringe pattern on specimen for lateral resolution enhancement. To prevent thermal drift of the SW, novel detection and estimation of the SW phase with real-time feedback control is devised for the stabilization and control of the fringe phase. SW-TIRF is a wide-field superresolution technique with resolution better than a fifth of emission wavelength or approximately 100 nm lateral resolution. We demonstrate the performance of the SW-TIRF microscopy using one- and two-directional SW illumination with a biological sample of cellular actin cytoskeleton of mouse fibroblast cells as well as single semiconductor nanocrystal molecules. The results confirm the superior resolution of SW-TIRF in addition to the merit of a high signal/background ratio from TIRF microscopy.

  17. Resolution of Internal Total Reflection Scanning Near-field Optical Microscopy

    Institute of Scientific and Technical Information of China (English)

    GE Huayong; GUO Qizhi; TAN Weihan

    2002-01-01

    In this paper, the probe-sample interaction equation based on Mie′s scattering theory is derived, and the resolution of scanning near field optical microscopy is calculated numerically. The results show that the offset of far-field component to near-field component in total field plays an important role in the resolution and the size of samples also has influence on resolution.

  18. Quantum (not frustrated) theory of the total internal reflection as the source of the Goos-Hänchen shift

    Science.gov (United States)

    Jakiel, Jacek; Kantor, Wiesław

    2014-10-01

    The frustrated total internal reflection theories (FTIR) from previous century are thoroughly recalculated from the, so called, monodromy operator's point of view - a theory lunched by Born and Wolf [Principles of Optics (Pergamon Press, 1975), Chap. 1.6] and Arnold [Geometric Methods in the Theory of Ordinary Differential Equations (Springer, 1987)]. Monodromy is a theory of simultaneous solution (for both reflection and transmission amplitudes) of one dimensional Schrödinger equation (for the wavefunction and its derivative) and the Maxwell equation (for electric and magnetic fields). Introducing new quantities: the dwell distance and the phase distance, we get general Goos-Hänchen (G-H) shift formula for optical tunneling for three layer system with refraction indexes n0, n1, n2. This formula reduces itself to expressions known from the scientific literature for infinite air gap (infinite width of second layer). Extension to many layers is possible.

  19. Quantitative Analysis of Total Petroleum Hydrocarbons in Soils: Comparison between Reflectance Spectroscopy and Solvent Extraction by 3 Certified Laboratories

    Directory of Open Access Journals (Sweden)

    Guy Schwartz

    2012-01-01

    Full Text Available The commonly used analytic method for assessing total petroleum hydrocarbons (TPH in soil, EPA method 418.1, is usually based on extraction with 1,1,2-trichlorotrifluoroethane (Freon 113 and FTIR spectroscopy of the extracted solvent. This method is widely used for initial site investigation, due to the relative low price per sample. It is known that the extraction efficiency varies depending on the extracting solvent and other sample properties. This study’s main goal was to evaluate reflectance spectroscopy as a tool for TPH assessment, as compared with three commercial certified laboratories using traditional methods. Large variations were found between the results of the three commercial laboratories, both internally (average deviation up to 20%, and between laboratories (average deviation up to 103%. Reflectance spectroscopy method was found be as good as the commercial laboratories in terms of accuracy and could be a viable field-screening tool that is rapid, environmental friendly, and cost effective.

  20. Total reflection X-ray fluorescence analysis of trace-elements in candies marketed in Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, T., E-mail: tmc@servidor.unam.m [Facultad de Quimica, Departamento de Quimica Inorganica y Nuclear. Universidad Nacional Autonoma de Mexico, Mexico D.F. 04510 (Mexico); Lartigue, J. [Facultad de Quimica, Departamento de Quimica Inorganica y Nuclear. Universidad Nacional Autonoma de Mexico, Mexico, D.F. 04510 (Mexico); Zarazua, G.; Avila-Perez, P. [National Institute of Nuclear Research. Ocoyoacac, Edo. de Mexico, 05045 (Mexico); Navarrete, M. [Facultad de Quimica, Departamento de Quimica Inorganica y Nuclear. Universidad Nacional Autonoma de Mexico, Mexico, D.F. 04510 (Mexico); Tejeda, S. [National Institute of Nuclear Research. Ocoyoacac, Edo. de Mexico, 05045 (Mexico)

    2010-06-15

    Trace metals concentrations in food are significant for nutrition, due either to their nature or toxicity. Sweets, including chewing gum and candies, are not exactly a food, but they usually are unwearied consumed by children, the most vulnerable age-group to any kind of metal contamination in the food chain. The presence of relatively high concentrations of heavy metals such as Lead elicits concern since children are highly susceptible to heavy metals poisoning. Trace-metals concentrations were determined for six different flavors of a Mexican candy by means of Total X-ray Fluorescence Spectrometry. Triplicate samples of the various candy's flavours (strawberry, pineapple, lemon, blackberry, orange and chilli) were digested in 8 mL of a mix of supra-pure HNO{sub 3} and H{sub 2}O{sub 2} (6 mL: 2 mL) in a microwave oven MARS-X. Results show the presence of essential and toxic elements such as Ti, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, and Pb. All metal concentrations were higher and significantly different ({alpha} = 0.05) in chilli candy, compared to other candy flavours. Lead concentration fluctuated in the range of 0.102 to 0.342 {mu}g g{sup -1}. A discussion about risk consumption and concentration allowed by Mexican and International Norms is made. As a part of the Quality Control Program, a NIST standard of 'Citrus Leaves' and a blank were treated in the same way.

  1. Design of an efficient Fresnel-type lens utilizing double total internal reflection for solar energy collection.

    Science.gov (United States)

    Wallhead, Ian; Jiménez, Teresa Molina; Ortiz, Jose Vicente García; Toledo, Ignacio Gonzalez; Toledo, Cristóbal Gonzalez

    2012-11-05

    A novel of Fresnel-type lens for use as a solar collector has been designed which utilizes double total internal reflection (D-TIR) to optimize collection efficiency for high numerical aperture lenses (in the region of 0.3 to 0.6 NA). Results show that, depending on the numerical aperture and the size of the receiver, a collection efficiency theoretical improvement on the order of 20% can be expected with this new design compared with that of a conventional Fresnel lens.

  2. Achromatic and high-resolution full-field X-ray microscopy based on total-reflection mirrors.

    Science.gov (United States)

    Matsuyama, Satoshi; Emi, Yoji; Kino, Hidetoshi; Kohmura, Yoshiki; Yabashi, Makina; Ishikawa, Tetsuya; Yamauchi, Kazuto

    2015-04-20

    We developed an achromatic and high-resolution full-field X-ray microscope based on advanced Kirkpatrick-Baez mirror optics that comprises two pairs of elliptical mirrors and hyperbolic mirrors utilizing the total reflection of X-rays. Performance tests to investigate the spatial resolution and chromatic aberration were performed at SPring-8. The microscope clearly resolved the pattern with ~100-nm feature size. Imaging the pattern by changing the X-ray energy revealed achromatism in the wide energy range of 8-11 keV.

  3. Total internal reflection fluorescence (TIRF) microscopy for real-time imaging of nanoparticle-cell plasma membrane interaction

    DEFF Research Database (Denmark)

    Parhamifar, Ladan; Moghimi, Seyed Moien

    2012-01-01

    Nanoparticulate systems are widely used for site-specific drug and gene delivery as well as for medical imaging. The mode of nanoparticle-cell interaction may have a significant effect on the pathway of nanoparticle internalization and subsequent intracellular trafficking. Total internal reflection...... fluorescence (TIRF) microscopy allows for real-time monitoring of nanoparticle-membrane interaction events, which can provide vital information in relation to design and surface engineering of therapeutic nanoparticles for cell-specific targeting. In contrast to other microscopy techniques, the bleaching...

  4. Elemental concentration in normal skin and fibroepithelial polip lesions by synchrotron radiation total reflection X-ray fluorescence technique

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Julio C.A.C.R.; Canellas, Catarine G.L.; Lopes, Ricardo T., E-mail: ricardo@lin.ufrj.br, E-mail: jcorsini@lin.ufrj.br [Nuclear Laboratory Instrumentation/COPPE, Federal University of Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil); Anjos, Marcelino J., E-mail: marcelin@lin.ufrj.br [Physics Institute, State University of Rio de Janeiro (UERJ), Rio de Janeiro, RJ (Brazil)

    2011-07-01

    In this work, the concentrations of trace elements were measured in acrochordon, a skin lesion also known as skin tag or fibroepithelial polyp, as well as in normal skin from the same patient. The samples were analysed by Synchrotron Radiation Total Reflection X- ray Fluorescence (SRTXRF) in the Synchrotron Light National Laboratory (LNLS) in Campinas/Sao Paulo-Brazil. The collection of lesion and healthy skin samples, including papillary dermis and epidermis, has involved 17 patients. It was evaluated the presence of P, S, Cl, K, Ca, Cr, Mn, Fe, Cu, Zn, Br and Rb in the paired samples, which were compared, and significant differences were found in some of them. (author)

  5. Elemental concentrations in skin of patients with fibroeptelial polip using synchrotron radiation total reflection x-ray fluorescence

    Science.gov (United States)

    Soares, Júlio C. A. C. R.; Anjos, Marcelino J.; Canellas, Catarine G. L.; Lopes, Ricardo T.

    2012-05-01

    In this work, the concentrations of trace elements were measured in acrochordon, a skin lesion also known as skin tag or fibroepithelial polyp, as well as in normal skin from the same patient. The samples were analyzed by Synchrotron Radiation Total Reflection X-ray Fluorescence (SRTXRF) in the Synchrotron Light National Laboratory (LNLS) in Campinas/São Paulo-Brazil. The collection of lesion and healthy skin samples, including papillary dermis and epidermis, has involved 17 patients. It was evaluated the presence of P, S, Cl, K, Ca, Fe, Cu and Zn in the paired samples, which were compared, and significant differences were found in some of them.

  6. Very low zero-dispersion wavelength predicted for single-mode modified-total-internal-reflection crystal fibre

    DEFF Research Database (Denmark)

    Jacobsen, Rune Shim; Lægsgaard, Jesper; Bjarklev, Anders Overgaard

    2004-01-01

    A zero-dispersion wavelength (lgr/sub ZD/) below 600 nm has been predicted for a pure silica modified-total-internal-reflection (M-TIR) single-mode crystal fibre with a 1 mm pitch. The fibre is single mode from at least 250 nm, i.e., from well below lgr/sub ZD/. Both a method for designing single......-mode crystal fibres using an anti-guiding structure and a fast calculation scheme for investigating the structure for different pitch sizes are proposed....

  7. Mapping of healthy oral mucosal tissue using diffuse reflectance spectroscopy: ratiometric-based total hemoglobin comparative study.

    Science.gov (United States)

    Hafez, Razan; Hamadah, Omar; Bachir, Wesam

    2015-11-01

    The objective of this study is to clinically evaluate the diffuse reflectance spectroscopy (DRS) ratiometric method for differentiation of normal oral mucosal tissues with different histological natures and vascularizations in the oral cavity. Twenty-one healthy patients aged 20-44 years were diagnosed as healthy and probed with a portable DRS system. Diffuse reflectance spectra were recorded in vivo in the range (450-650 nm). In this study, the following three oral mucosal tissues were considered: masticatory mucosa, lining mucosa, and specialized mucosa. Spectral features based on spectral intensity ratios were determined at five specific wavelengths (512, 540, 558, 575, and 620 nm). Total hemoglobin based on spectral ratios for the three anatomical regions have also been evaluated. The three studied groups representing different anatomical regions in the oral cavity were compared using analysis of variance and post hoc least significant difference tests. Statistical analysis showed a significant difference in the mean of diffuse spectral ratios between the groups (P spectroscopy might be used for creating a DRS databank of normal oral mucosal tissue with specific spectral ratios featuring the total hemoglobin concentrations. That would further enhance the discrimination of oral tissue for examining the histological nature of oral mucosa and diagnosis of early precancerous changes in the oral cavity based on non-invasive monitoring of neovascularization.

  8. Attenuation of global ultraviolet and visible irradiance over Greece during the total solar eclipse of 29 March 2006

    Directory of Open Access Journals (Sweden)

    A. Kazantzidis

    2007-09-01

    Full Text Available The variability of ultraviolet and photosynthetically active radiation during the total solar eclipse of 29 March 2006 was examined in this study. The measurements from NILU-UV multichannel actinometers at 7 stations of the Greek UV Network were used, where the maximum eclipse percentage ranged from 73.1% to 94.8%. In addition, an extra instrument was established at a remote Greek island, Kastelorizo, which was within the Moon's umbral shadow. The measured changes in UV and visible irradiance were compared with 1-D model calculations (accounting for the limb darkening effect and differences up 30% were observed for the lower UV wavelengths at high eclipse percentages. The spectral ratios between wavelengths was generally reproduced by the 1-D model, expect for 305 nm, where the irradiance at eclipse percentages of more than 85% decreased with slower rates than for longer wavelengths. As a result, the total ozone, derived from the 305/320 nm ratio, apparently decreased significantly for high eclipse percentages. Comparison results with 3-D model calculations approaching and during totality revealed an agreement with measurements in the UV-A region.

  9. Fish samples as bioindicator of environmental quality: synchrotron radiation total reflection X-ray fluorescence analysis (SR-TXRF)

    Energy Technology Data Exchange (ETDEWEB)

    Vives, Ana Elisa Sirito de [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil). Faculdade de Engenharia, Arquitetura e Urbanismo]. E-mail: aesvives@unimep.br; Moreira, Silvana [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia, Arquitetura e Urbanismo]. E-mail: Silvana@fec.unicamp.br; Brienza, Sandra Maria Boscolo [Universidade Metodista de Piracicaba (UNIMEP), SP (Brazil). Faculdade de Ciencias Matematicas, da Natureza e de Tecnologia da Informacao]. E-mail: sbrienza@unimep.br; Zucchi, Orgheda Luiza Araujo Domingues [Sao Paulo Univ., Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas]. E-mail: olzucchi@fcfrp.usp.br; Nascimento Filho, Virgilio Franco do [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)]. E-mail: virgilio@cena.usp.br

    2005-07-01

    In this study fish were used as bioindicators of environmental contamination. The species were collected in Piracicaba River, Sao Paulo state, Brazil and the toxic elements concentrations were determined in muscle tissue and viscus (liver, intestine and stomach) by Synchrotron Radiation Total Reflection X-Ray Fluorescence Analysis (SR-TXRF). Were determined the elements Ti, Cr, Mn, Fe, Ni, Cu, Zn and Ba. The results were compared with values established by Brazilian Legislation for general food. The elements concentrations evidenced potential risk to human health and environmental quality alteration of the studied area. The measurements were realized at the 'Laboratorio Nacional de Luz Sincrotron' (LNLS) located in Campinas, Sao Paulo State, Brazil. (author)

  10. In-situ analysis of fruit anthocyanins by means of total internal reflectance, continuous wave and time-resolved spectroscopy

    Science.gov (United States)

    Zude, Manuela; Spinelli, Lorenzo; Dosche, Carsten; Torricelli, Alessandro

    2009-08-01

    In sweet cherry (Prunus avium), the red pigmentation is correlated with the fruit maturity stage and can be measured by non-invasive spectroscopy. In the present study, the influence of varying fruit scattering coefficients on the fruit remittance spectrum (cw) were corrected with the effective pathlength and refractive index in the fruit tissue obtained with distribution of time-of-flight (DTOF) readings and total internal reflection fluorescence (TIRF) analysis, respectively. The approach was validated on fruits providing variation in the scattering coefficient outside the calibration sample set. In the validation, the measuring uncertainty when non-invasively analyzing fruits with cw method in comparison with combined application of cw, DTOF, and TIRF measurements showed an increase in r2 up to 22.7 % with, however, high errors in all approaches.

  11. Practical guidelines for best practice on Total Reflection X-ray Fluorescence spectroscopy: Analysis of aqueous solutions

    Science.gov (United States)

    Riaño, Sofía; Regadío, Mercedes; Binnemans, Koen; Vander Hoogerstraete, Tom

    2016-10-01

    Despite the fact that Total Reflection X-ray Fluorescence (TXRF) is becoming more and more popular as a quantification technique in analytical chemistry due to its simplicity and robustness, there are still some key aspects related to the sample preparation that need to be improved. In this work, the effect of different parameters is investigated: measurement time, carrier position, sample volume and sample drying time. The measurement time and the sample volume on the carriers mainly affect the recovery rate and relative standard deviation of the quantified metal from aqueous solutions. The most important parameters that play a fundamental role in the calibration of a TXRF machine such as choice of the standard element and concentration ratio between the analyte and the standard are discussed. Practical and easy guidelines for the correct preparation of aqueous samples are presented. These can be used by both less and more experienced TXRF users, interested in measuring metal ion concentrations in aqueous samples.

  12. Total reflection x-ray fluorescence spectroscopy as a tool for evaluation of iron concentration in ferrofluids and yeast samples

    Science.gov (United States)

    Kulesh, N. A.; Novoselova, I. P.; Safronov, A. P.; Beketov, I. V.; Samatov, O. M.; Kurlyandskaya, G. V.; Morozova, M.; Denisova, T. P.

    2016-10-01

    In this study, total reflection x-ray fluorescent (TXRF) spectrometry was applied for the evaluation of iron concentration in ferrofluids and biological samples containing iron oxide magnetic nanoparticles obtained by the laser target evaporation technique. Suspensions of maghemite nanoparticles of different concentrations were used to estimate the limitation of the method for the evaluation of nanoparticle concentration in the range of 1-5000 ppm in absence of organic matrix. Samples of single-cell yeasts grown in the nutrient media containing maghemite nanoparticles were used to study the nanoparticle absorption mechanism. The obtained results were analyzed in terms of applicability of TXRF for quantitative analysis in a wide range of iron oxide nanoparticle concentrations for biological samples and ferrofluids with a simple established protocol of specimen preparation.

  13. Elemental concentration analysis in the brain of young and old Wistar rats by total reflection X-ray fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Serpa, Renata F.B.; Jesus, Edgar F.O. de; Lopes, Ricardo T. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Nuclear Instrumentation Lab.]. E-mail: renata@lin.ufrj.br; Anjos, Marcelino J. dos [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Physics Inst.]. E-mail: marcelin@lin.ufrj.br; Carmo, Maria G.T. do [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Nutrition Inst.; Rocha, Monica S. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. of Basics and Clinic Pharmacy; Moreira, Silvana [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Civil Engineering Dept.; Martinez, Ana M.B. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. of Histology and Embryology

    2007-07-01

    It is well known that aging is associated with neurobehavioral deficits. The aging process of human brain is characterized by progressive neuronal loss. Furthermore, certain brain areas are more vulnerable to neuronal degeneration than others, reflecting an altered resistance to stress of the tissue itself and/or the lack of adequate immunological defense mechanisms in these regions. About the elemental levels in the brain, it is known that the excess ou deficiency of some elements are toxic for human healthy, being also related to several neurodegenerative diseases. In this way, the main goal of this work was to determine the elemental concentration in the hippocampus of young and old male (n = 10) and female (n = 10) Wistar rats by total reflection X-ray fluorescence spectrometry with synchrotron radiation (SR-TXRF). These measurements were carried out at XRF beam line at Light Synchrotron Brazilian Laboratory, Campinas, Brazil. About the results, we could observe that Al, Fe, Cu, Zn and Br levels were higher in the hippocampus of the old female rats than the young ones. On the other hand, only Cu levels were higher in the hippocampus of the old male rats than the young ones. Therefore, the aging of the hippocampus of the female rats can be characterized by an accumulate for Al, Fe, Cu, Zn and Br. The excess in these elements levels are also associated with several neurodegenerative disorders, such as Alzheimer' disease, Parkinson's disease and Huntington's disease. (author)

  14. Determination of heavy metals in macrozoobenthos from the rivers Tisza and Szamos by total reflection X-ray fluorescence spectrometry

    Science.gov (United States)

    Woelfl, S.; Mages, M.; Óvári, M.; Geller, W.

    2006-11-01

    In 2000, accidents in the Romanian mining industry in key catchment areas led to heavy metal contamination of the Hungarian rivers Tisza and Szamos resulting in substantial heavy metal loads in several sediments of the upper river basins. This enhanced metal content might have been bioaccumulated in benthic organisms during the following years. Therefore, the aim of this study was to test, whether the zoobenthic fauna showed an enhanced metal content 3 years after the industrial accident. Macrozoobenthic insect larvae (chironomids) were sampled 100 m below and above the confluent site of the rivers Tisza and Szamos during summer 2003 and for comparison purpose also in the river Maros, a tributary of the Tisza river, during 2005. In order to determine their heavy metal content, single specimens were prepared and analysed by Total Reflection X-ray Fluorescence Spectrometry (TRXF) according to the modified dry method. Fe was much lower and Mn and Zn much higher concentrated in benthos from the more contaminated Szamos river compared to the Tisza and Maros rivers. In this sense, the benthic organisms reflected very well the enhanced metal concentrations in the contaminated rivers being suitable as bioindicators of metal contamination. However, the sediment bioaccumulation factor was low at all sampling sites indicating a low bioavailability of trace metals for benthic organisms.

  15. Determination of heavy metals in macrozoobenthos from the rivers Tisza and Szamos by total reflection X-ray fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Woelfl, S. [Universidad Austral de Chile, Instituto de Zoologia, Casilla 567, Valdivia (Chile)]. E-mail: swoelfl@uach.cl; Mages, M. [Helmhotz Centre for Environmental Research (UFZ), Department of River Ecology, Brueckstrasse 3a, D-39114, Magdeburg (Germany); Ovari, M. [Ovari, M. Eoetvoes University, Department of Organic Chemistry, H-1117, Budapest, Pazmany P. stny. 1/a (Hungary); Geller, W. [Helmhotz Centre for Environmental Research (UFZ), Department of River Ecology, Brueckstrasse 3a, D-39114, Magdeburg (Germany)

    2006-11-15

    In 2000, accidents in the Romanian mining industry in key catchment areas led to heavy metal contamination of the Hungarian rivers Tisza and Szamos resulting in substantial heavy metal loads in several sediments of the upper river basins. This enhanced metal content might have been bioaccumulated in benthic organisms during the following years. Therefore, the aim of this study was to test, whether the zoobenthic fauna showed an enhanced metal content 3 years after the industrial accident. Macrozoobenthic insect larvae (chironomids) were sampled 100 m below and above the confluent site of the rivers Tisza and Szamos during summer 2003 and for comparison purpose also in the river Maros, a tributary of the Tisza river, during 2005. In order to determine their heavy metal content, single specimens were prepared and analysed by Total Reflection X-ray Fluorescence Spectrometry (TRXF) according to the modified dry method. Fe was much lower and Mn and Zn much higher concentrated in benthos from the more contaminated Szamos river compared to the Tisza and Maros rivers. In this sense, the benthic organisms reflected very well the enhanced metal concentrations in the contaminated rivers being suitable as bioindicators of metal contamination. However, the sediment bioaccumulation factor was low at all sampling sites indicating a low bioavailability of trace metals for benthic organisms.

  16. Attenuation of global ultraviolet and visible irradiance over Greece during the total solar eclipse of 29 March 2006

    Directory of Open Access Journals (Sweden)

    A. Kazantzidis

    2007-12-01

    Full Text Available The variability of ultraviolet and photosynthetically active radiation (PAR during the total solar eclipse of 29 March 2006 was examined in this study. The measurements from NILU-UV multichannel radiometers at 7 stations of the Greek UV Network were used, where the maximum eclipse percentage ranged from 73.1% to 94.8%. In addition, an extra instrument was established at a remote Greek island, Kastelorizo, which was within the Moon's umbral shadow. The reduction of irradiance at 305 and 312 nm relative to non-eclipse conditions at all sites was almost 1.5 times more than the corresponding decrease in the UVA and visible part of the spectrum and reached 98% for eclipse percentage equal to 94%. The availability of several instruments in close proximity to the path of the umbral shadow provided a challenging test for the models. The measured changes in UV and visible irradiance were compared with 1-D model calculations accounting for the limb darkening effect. The agreement between measurements and modeled values at all sites is within 3% for eclipse percentages of less than 30% and becomes worse as the eclipse progresses. The 1-D model reproduced the spectral effect of the eclipse in UVA and PAR wavelength regions within 3% for eclipse percentages up to 50%, but only the half of the observed change was captured as the eclipse progressed. At three sites, where the eclipse maximum was more than 94%, the measured irradiance at 305 nm for eclipse percentages of more than 85% decreased with slower rates than for longer wavelengths. As a result, the total ozone values, derived from the 305/320 nm ratios, apparently decreased significantly for high eclipse percentages. The effect is similar at all three sites, but the interpretation of this observation remains a challenge. Comparison results with 3-D model calculations shortly before, during and shortly after totality were performed for the first time and revealed an agreement with measurements

  17. p38 MAPK Inhibitor Insufficiently Attenuates HSC Senescence Administered Long-Term after 6 Gy Total Body Irradiation in Mice

    Directory of Open Access Journals (Sweden)

    Lu Lu

    2016-06-01

    Full Text Available Senescent hematopoietic stem cells (HSCs accumulate with age and exposure to stress, such as total-body irradiation (TBI, which may cause long-term myelosuppression in the clinic. However, the methods available for long-term myelosuppression remain limited. Previous studies have demonstrated that sustained p38 mitogen-activated protein kinases (p38 MAPK activation in HSCs following exposure to TBI in mice and the administration of its inhibitor twenty-four hours after TBI may partially prevent long-term myelosuppression. However, long-term myelosuppression is latent and identified long after the administration of radiation. In this study, we investigated the effects of SB203580 (a small molecule inhibitor of p38 MAPK on long-term myelosuppression induced by TBI. Mice with hematopoietic injury were injected intraperitoneally with SB203580 every other day five times beginning 70 days after 6 Gy of 137Cs γ ray TBI. Our results at 80 days demonstrated that SB203580 did not significantly improve the TBI-induced long-term reduction of peripheral blood cell and bone marrow nucleated cell (BMNC counts, or defects in hematopoietic progenitor cells (HPCs and HSC clonogenic function. SB203580 reduced reactive oxygen species (ROS production and p-p38 expression; however, SB203580 had no effect on p16 expression in the HSCs of mice. In conclusion, these findings suggest that treatment with SB203580 70 days after TBI in mice inhibits the ROS-p38 oxidative stress pathway; however, it has no therapeutic effect on long-term myelosuppression induced by TBI.

  18. Glutamine-supplemented total parenteral nutrition attenuates plasma interleukin-6 in surgical patients with lower disease severity

    Institute of Scientific and Technical Information of China (English)

    Ming-Tsan Lin; Sung-Pao Kung; Sung-Ling Yeh; Koung-Yi Liaw; Ming-Yang Wang; Ming-Liang Kuo; Po-Houng Lee; Wei-Jao Chen

    2005-01-01

    AIM: To evaluate whether the effect of Gln dipeptideenriched total parenteral nutrition (TPN) on postoperative cytokine alteration depended on the disease severity of surgical patients.METHODS: Forty-eight patients with major abdominal surgery were allocated to two groups to receive isonitrogenous (0.228 g nitrogen/kg per d) and isocaloric(30 kcal/kg per d) TPN for 6 d. Control group (Conv)using conventional TPN solution received 1.5 g amino adds/kg per day, whereas the test group received 0.972 g amino acids/kg per day and 0.417 g L-alanyl-L-glutamine(Ala-Gln)/kg per day. Blood samples were collected on d 1 and d 6 postoperatively for plasma interleukin (IL)-2,IL-6, IL-8, and interferon (IFN)-γ analysis.RESULTS: Plasma IL-2 and IFN-γ were not detectable.IL-6 concentrations were significantly lower on the 6th postoperative day in the Ala-Gln group than those in the Conv group in patients with APACHE Ⅱ≤6, whereas no difference was noted in patients with APACHE Ⅱ>6. There was no difference in IL-8 levels between the two groups.No difference in cumulative nitrogen balance was observed on d 2-5 after the operation between the two groups(Ala-Gln -3.2±1.6 g vs Conv -6.5±2.7 g). A significant inverse correlation was noted between plasma IL-6 levels and cumulative nitrogen balance postoperatively in the Ala-Gln group, whereas no such correlation was observed in the Conv group.CONCLUSION: TPN supplemented with Gln dipeptide had no effect on plasma IL-8 levels after surgery. However,Gln supplementation had a beneficial effect on decreasing systemic IL-6 production after surgery in patients with low admission illness severity, and lower plasma IL-6 may improve nitrogen balance in patients with abdominal surgery when Gln was administered.

  19. Clonorchis sinensis-derived total protein attenuates airway inflammation in murine asthma model by inducing regulatory T cells and modulating dendritic cell functions

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Young-Il [Div. of Malaria and Parasitic Diseases, Korea Centers for Disease Control and Prevention, Osong (Korea, Republic of); Kim, Seung Hyun [Div. of AIDS, National Institute of Health, Korea Centers for Disease Control and Prevention, Osong (Korea, Republic of); Ju, Jung Won; Cho, Shin Hyeong; Lee, Won Ja [Div. of Malaria and Parasitic Diseases, Korea Centers for Disease Control and Prevention, Osong (Korea, Republic of); Park, Jin Wook; Park, Yeong-Min [Dept. of Microbiology and Immunology, College of Medicine, Pusan National University, Yang-San (Korea, Republic of); Lee, Sang Eun, E-mail: ondalgl@cdc.go.kr [Div. of Malaria and Parasitic Diseases, Korea Centers for Disease Control and Prevention, Osong (Korea, Republic of)

    2011-04-22

    Highlights: {yields} Treatment with Clonorchis sinensis-derived total protein attenuates OVA-induced airway inflammation and AHR to methacholine. {yields} Induction of CD4{sup +}CD25{sup +}Foxp3{sup +} T cells and IL-10 along with suppression of splenocyte proliferation by C. sinensis-derived total protein. {yields} C. sinensis-derived total protein interferes with the expression of co-stimulatory molecules in DCs. -- Abstract: Asthma is characterized by Th2-mediated inflammation, resulting in airway hyperresponsiveness (AHR) through airway remodeling. Recent epidemiological and experimental reports have suggested an inverse relationship between the development of allergy and helminth infections. Infection by Clonorchis sinensis, a liver fluke that resides in the bile duct of humans, is endemic predominantly in Asia including Korea and China. Using a murine model for asthma, we investigated the effects of C. sinensis-derived total protein (Cs-TP) on allergen-induced airway inflammation and the mechanism underlying the protective effects of Cs-TP administration on asthma. Treatment with Cs-TP attenuated OVA-induced airway inflammation and methacholine-induced AHR, as well as eosinophilia development, lymphocyte infiltration into the lung, and goblet cell metaplasia. This protective effect of Cs-TP is associated with markedly reduced OVA-specific IgE and Th1/Th2 cytokine production. Moreover, Cs-TP increased the number of CD4{sup +}CD25{sup +}Foxp3{sup +} regulatory T (Treg) cells as well as their suppressive activity. In fact, proliferation of OVA-restimulated splenocytes was suppressed significantly. Cs-TP also inhibited the expression of such co-stimulatory molecules as CD80, CD86, and CD40 in LPS- or OVA-stimulated dendritic cells (DCs), suggesting that Cs-TP could interfere with the capacity of airway DCs to prime naive T cells. These data demonstrate the capacity of C. sinensis to ameliorate allergic asthma and broaden our understanding of the paradoxical

  20. Pharmacokinetic detection of penicillin excreted in urine using a totally internally reflected resonance light scattering technique with cetyltrimethylammonium bromide.

    Science.gov (United States)

    Huang, Cheng Zhi; Feng, Ping; Li, Yuan Fang; Tan, Ke Jun

    2005-05-01

    A quantitative analysis method for penicillins including ampicillin (AmP), benzyl penicillin (BP), oxacillin (OA) and amoxycillin (AmO) is proposed that makes use of the totally internally reflected resonance light scattering (TIR-RLS) signal from the penicillin at the H2O/CCl4 interface in the presence of cetyltrimethylammonium bromide (CTMAB), and enables the pharmacokinetics of penicillin taken orally and excreted through urine to be monitored. Penicillin is coadsorbed with CTMAB at the H2O/CCl4 interface in neutral solution, resulting in the formation of ion associates that display greatly enhanced TIR-RLS signals (maximum at 368-372 nm). This enhanced TIR-RLS intensity was found to be proportional to the penicillin concentration over the range 0.2 x 10(-6) to 2.2 x 10(-6) mol L(-1), with limits of determination (3sigma) of 5.0 x 10(-8) to 7.0 x 10(-8) mol L(-1). Pharmacokinetics studies performed using the present method show that the excretion of orally-taken ampicillin through urine has a half-time of 1.05 h and an excremental quantum over 8 h of 49.3%, respectively.

  1. Planar solar concentrator featuring alignment-free total-internal-reflection collectors and an innovative compound tracker.

    Science.gov (United States)

    Teng, Tun-Chien; Lai, Wei-Che

    2014-12-15

    This study proposed a planar solar concentrator featuring alignment-free total-internal-reflection (TIR) collectors and an innovative compound tracker. The compound tracker, combining a mechanical single-axis tracker and scrollable prism sheets, can achieve a performance on a par with dual-axis tracking while reducing the cost of the tracking system and increasing its robustness. The alignment-free TIR collectors are assembled on the waveguide without requiring alignment, so the planar concentrator is relatively easily manufactured and markedly increases the feasibility for use in large concentrators. Further, the identical TIR collector is applicable to various-sized waveguide slab without requiring modification, which facilitates flexibility regarding the size of the waveguide slab. In the simulation model, the thickness of the slab was 2 mm, and its maximal length reached 6 m. With an average angular tolerance of ±0.6°, and after considering both the Fresnel loss and the angular spread of the sun, the simulation indicates that the waveguide concentrator of a 1000-mm length provides the optical efficiencies of 62-77% at the irradiance concentrations of 387-688, and the one of a 2000-mm length provides the optical efficiencies of 52-64.5% at the irradiance concentrations of 645-1148. Alternatively, if a 100-mm horizontally staggered waveguide slab is collocated with the alignment-free TIR collectors, the optical efficiency would be greatly improved up to 91.5% at an irradiance concentration of 1098 (C(geo) = 1200X).

  2. Analytical capabilities of total reflection X-ray fluorescence spectrometry for silver nanoparticles determination in soil adsorption studies

    Science.gov (United States)

    Torrent, Laura; Iglesias, Mònica; Hidalgo, Manuela; Marguí, Eva

    2016-12-01

    In recent years, the production of silver nanoparticles (AgNPs) has grown due to their antibacterial properties. This fact enhances the release of these particles into the environment, especially in soils that are the major sink. To better understand adsorption processes in soils, usually batch kinetic studies are carried out. In this context, we tested the possibilities of using total reflection X-ray fluorescence spectrometry (TXRF) to monitor the silver content in soil adsorption kinetic studies. It was found that the lower limit of detection for Ag (through Ag-Kα detection) in aqueous solutions was around 37 μg·L- 1, which was suitable to carry out this kind of studies. Moreover, the direct analysis of Ag adsorbed onto soil after the kinetic studies was investigated. In this case, the limit of detection for Ag was around 1.7 mg·kg- 1. All TXRF results were compared with those obtained by inductively coupled plasma optic emission spectrometry and good agreement was found. The batch adsorption tests performed showed that 98% of polyvinylpyrrolidone coated AgNPs were retained on the tested soils in < 6 h.

  3. Intelligent Simultaneous Quantitative Online Analysis of Environmental Trace Heavy Metals with Total-Reflection X-Ray Fluorescence

    Directory of Open Access Journals (Sweden)

    Junjie Ma

    2015-05-01

    Full Text Available Total-reflection X-ray fluorescence (TXRF has achieved remarkable success with the advantages of simultaneous multi-element analysis capability, decreased background noise, no matrix effects, wide dynamic range, ease of operation, and potential of trace analysis. Simultaneous quantitative online analysis of trace heavy metals is urgently required by dynamic environmental monitoring and management, and TXRF has potential in this application domain. However, it calls for an online analysis scheme based on TXRF as well as a robust and rapid quantification method, which have not been well explored yet. Besides, spectral overlapping and background effects may lead to loss of accuracy or even faulty results during practical quantitative TXRF analysis. This paper proposes an intelligent, multi-element quantification method according to the established online TXRF analysis platform. In the intelligent quantification method, collected characteristic curves of all existing elements and a pre-estimated background curve in the whole spectrum scope are used to approximate the measured spectrum. A novel hybrid algorithm, PSO-RBFN-SA, is designed to solve the curve-fitting problem, with offline global optimization and fast online computing. Experimental results verify that simultaneous quantification of trace heavy metals, including Cr, Mn, Fe, Co, Ni, Cu and Zn, is realized on the online TXRF analysis platform, and both high measurement precision and computational efficiency are obtained.

  4. Determination of arsenic in water samples by Total Reflection X-Ray Fluorescence using pre-concentration with alumina

    Energy Technology Data Exchange (ETDEWEB)

    Barros, Haydn [Laboratorio de Fisica Nuclear, Dpto. De Fisica, Universidad Simon Bolivar, Sartenejas, Baruta (Venezuela, Bolivarian Republic of); Marco Parra, Lue-Meru, E-mail: luemerumarco@yahoo.e [Universidad Centroccidental Lisandro Alvarado, Dpto. Quimica y Suelos, Decanato de Agronomia, Tarabana, Cabudare, Edo.Lara (Venezuela, Bolivarian Republic of); Bennun, Leonardo [Universidad de Concepcion, Concepcion (Chile); Greaves, Eduardo D. [Laboratorio de Fisica Nuclear, Dpto. De Fisica, Universidad Simon Bolivar, Sartenejas, Baruta (Venezuela, Bolivarian Republic of)

    2010-06-15

    The determination of arsenic in water samples requires techniques of high sensitivity. Total Reflection X-Ray Fluorescence (TXRF) allows the determination but a prior separation and pre-concentration procedure is necessary. Alumina is a suitable substrate for the selective separation of the analytes. A method for separation and pre-concentration in alumina, followed by direct analysis of the alumina is evaluated. Quantification was performed using the Al-K{alpha} and Co-K{alpha} lines as internal standard in samples prepared on an alumina matrix, and compared to a calibration with aqueous standards. Artificial water samples of As (III) and As (V) were analyzed after the treatment. Fifty milliliters of the sample at ppb concentration levels were mixed with 10 mg of alumina. The pH, time and temperature were controlled. The alumina was separated from the slurry by centrifugation, washed with de-ionized water and analyzed directly on the sample holder. A pre-concentration factor of 100 was found, with detection limit of 0.7 {mu}gL{sup -1}. The percentage of recovery was 98% for As (III) and 95% for As (V) demonstrating the suitability of the procedure.

  5. Intelligent simultaneous quantitative online analysis of environmental trace heavy metals with total-reflection X-ray fluorescence.

    Science.gov (United States)

    Ma, Junjie; Wang, Yeyao; Yang, Qi; Liu, Yubing; Shi, Ping

    2015-05-06

    Total-reflection X-ray fluorescence (TXRF) has achieved remarkable success with the advantages of simultaneous multi-element analysis capability, decreased background noise, no matrix effects, wide dynamic range, ease of operation, and potential of trace analysis. Simultaneous quantitative online analysis of trace heavy metals is urgently required by dynamic environmental monitoring and management, and TXRF has potential in this application domain. However, it calls for an online analysis scheme based on TXRF as well as a robust and rapid quantification method, which have not been well explored yet. Besides, spectral overlapping and background effects may lead to loss of accuracy or even faulty results during practical quantitative TXRF analysis. This paper proposes an intelligent, multi-element quantification method according to the established online TXRF analysis platform. In the intelligent quantification method, collected characteristic curves of all existing elements and a pre-estimated background curve in the whole spectrum scope are used to approximate the measured spectrum. A novel hybrid algorithm, PSO-RBFN-SA, is designed to solve the curve-fitting problem, with offline global optimization and fast online computing. Experimental results verify that simultaneous quantification of trace heavy metals, including Cr, Mn, Fe, Co, Ni, Cu and Zn, is realized on the online TXRF analysis platform, and both high measurement precision and computational efficiency are obtained.

  6. Inorganic pigment study of the San Pedro Gonzalez Telmo Sibyls using total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez, Cristina, E-mail: vazquez@cnea.gov.a [Universidad de Buenos Aires, Facultad de Ingenieria, Paseo Colon 850. C1063ACU, Buenos Aires (Argentina); Comision Nacional de Energia Atomica, Gerencia Quimica, Av. Gral Paz 1499, B1650KNA, San Martin (Argentina); Custo, Graciela, E-mail: custo@cnea.gov.a [Comision Nacional de Energia Atomica, Gerencia Quimica, Av. Gral Paz 1499, B1650KNA, San Martin (Argentina); Barrio, Nestor, E-mail: nbarrio@unsam.edu.a [CEIRCAB-TAREA, Universidad Nacional de San Martin (UNSAM), Escuela de Humanidades, Campus Miguelete, 25 de Mayo y Francia, B1650KNA, San Martin (Argentina); Burucua, Jose, E-mail: gburucua@unsam.edu.a [CEIRCAB-TAREA, Universidad Nacional de San Martin (UNSAM), Escuela de Humanidades, Campus Miguelete, 25 de Mayo y Francia, B1650KNA, San Martin (Argentina); Boeykens, Susana [Universidad de Buenos Aires, Facultad de Ingenieria, Paseo Colon 850. C1063ACU, Buenos Aires (Argentina); Marte, Fernando, E-mail: fmarte@unsam.edu.a [CEIRCAB-TAREA, Universidad Nacional de San Martin (UNSAM), Escuela de Humanidades, Campus Miguelete, 25 de Mayo y Francia, B1650KNA, San Martin (Argentina)

    2010-09-15

    This article describes the study carried out on a series of oil paintings on canvas from the eighteenth century that were restored at Centro de Produccion e Investigacion en Restauracion y Conservacion Artistica y Bibliografica - Tarea (CEIRCAB-Tarea), Buenos Aires, Argentina: the San Pedro Gonzalez Telmo Sibyls. Experimental study was undertaken to identify inorganic pigments and the technique used in their confection; and, in this way, try to add information about their local origin. Therefore special emphasis was put to infer technologies used in the manufacturing of these paintings. Elemental analysis was performed by total reflection X-ray fluorescence spectrometry (TXRF) and complemented by optical and polarized light microscopy. Microsampling was carefully done over areas of the paintings which were damaged and where a small additional loss will not be noticed. This investigation has shown that a variety of pigments were used, namely earth pigments (red and yellow ochres), white lead, vermilion, etc., and they were used either pure or in mixtures. This characterization helped conservators in their decisions regarding a better understanding of the deterioration processes. In addition, this research about the material composition allowed the art historians and restorers the possibility to obtain information about where, when or by whom The San Pedro Gonzalez Telmo Sibyls may have been painted.

  7. Analytical performance of benchtop total reflection X-ray fluorescence instrumentation for multielemental analysis of wine samples

    Science.gov (United States)

    Dalipi, Rogerta; Marguí, Eva; Borgese, Laura; Bilo, Fabjola; Depero, Laura E.

    2016-06-01

    Recent technological improvements have led to a widespread adoption of benchtop total reflection X-ray fluorescence systems (TXRF) for analysis of liquid samples. However, benchtop TXRF systems usually present limited sensitivity compared with high-scale instrumentation which can restrict its application in some fields. The aim of the present work was to evaluate and compare the analytical capabilities of two TXRF systems, equipped with low power Mo and W target X-ray tubes, for multielemental analysis of wine samples. Using the Mo-TXRF system, the detection limits for most elements were one order of magnitude lower than those attained using the W-TXRF system. For the detection of high Z elements like Cd and Ag, however, W-TXRF remains a very good option due to the possibility of K-Lines detection. Accuracy and precision of the obtained results have been evaluated analyzing spiked real wine samples and comparing the TXRF results with those obtained by inductively coupled plasma emission spectroscopy (ICP-OES). In general, good agreement was obtained between ICP-OES and TXRF results for the analysis of both red and white wine samples except for light elements (i.e., K) which TXRF concentrations were underestimated. However, a further achievement of analytical quality of TXRF results can be achieved if wine analysis is performed after dilution of the sample with de-ionized water.

  8. Elemental analysis of tree leaves by total reflection X-ray fluorescence: New approaches for air quality monitoring.

    Science.gov (United States)

    Bilo, Fabjola; Borgese, Laura; Dalipi, Rogerta; Zacco, Annalisa; Federici, Stefania; Masperi, Matteo; Leonesio, Paolo; Bontempi, Elza; Depero, Laura E

    2017-03-22

    This work shows that total reflection X-ray fluorescence (TXRF) is a fast, easy and successful tool to determine the presence of potentially toxic elements in atmospheric aerosols precipitations on tree leaves. Leaves are collected in eleven parks of different geographical areas of the Brescia city, Northern Italy, for environmental monitoring purposes. Two sample preparation procedures are considered: microwave acid digestion and the novel SMART STORE method for direct analysis. The latter consists in sandwiching a portion of the leaf between two organic foils, metals free, to save it from contamination and material loss. Mass composition of macro, micro and trace elements is calculated for digested samples, while relative elemental amount are obtained from direct analysis. Washed and unwashed leaves have a different composition in terms of trace elements. Differentiation occurs according to Fe, Pb and Cu contributions, considered as most representative of air depositions, and probably related to anthropogenic sources. Direct analysis is more representative of the composition of air precipitations. Advantages and drawbacks of the presented methods of sample preparation and TXRF analysis are discussed. Results demonstrate that TXRF allows to perform accurate and precise quantitative analysis of digested samples. In addition, direct analysis of leaves may be used as a fast and simple method for screening in the nanograms range.

  9. Characterization of GLUT4-containing vesicles in 3T3-L1 adipocytes by total internal reflection fluorescence microscopy

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Insulin-responsive GLUT4(glucose transporter 4) translocation plays a major role in regulating glucose uptake in adipose tissue and muscle.Whether or not there is a specialized secretory GSV(GLUT4 storage vesicle) pool,and more importantly how GSVs are translocated to the PM(plasma membrane) under insulin stimulation is still under debate.In the present study,we systematically analyzed the dynamics of a large number of single GLUT4-containing vesicles in 3T3-L1 adipocytes by TIRFM(total internal reflection fluorescence microscopy).We found that GLUT4-containing vesicles can be classified into three groups according to their mobility,namely vertical,stable,and lateral GLUT4-containing vesicles.Among these groups,vertical GLUT4-containing vesicles exclude transferrin receptors and move towards the PM specifically in response to insulin stimulation,while stable and lateral GLUT4-containing vesicles contain transferrin receptors and show no insulin responsiveness.These data demonstrate that vertical GLUT4-containing vesicles correspond to specialized secretory GSVs,which approach the PM directly and bypass the constitutive recycling pathway.

  10. Protein-surfactant interactions at hydrophobic interfaces studied with total internal reflection fluorescence correlation spectroscopy (TIR-FCS).

    Science.gov (United States)

    Sonesson, Andreas W; Blom, Hans; Hassler, Kai; Elofsson, Ulla M; Callisen, Thomas H; Widengren, Jerker; Brismar, Hjalmar

    2008-01-15

    The aim of this work was to study the dynamics of proteins near solid surfaces in the presence or absence of competing surfactants by means of total internal reflection fluorescence correlation spectroscopy (TIR-FCS). Two different proteins were studied, bovine serum albumin (BSA) and Thermomyces lanuginosus lipase (TLL). A nonionic/anionic (C12E6/LAS) surfactant composition was used to mimic a detergent formulation and the surfaces used were C18 terminated glass. It was found that with increasing surfactant concentrations the term in the autocorrelation function (ACF) representing surface binding decreased. This suggested that the proteins were competed off the hydrophobic surface by the surfactant. When fitting the measured ACF to a model for surface kinetics, it was seen that with raised C12E6/LAS concentration, the surface interaction rate increased for both proteins. Under these experimental conditions this meant that the time the protein was bound to the surface decreased. At 10 microM C12E6/LAS the surface interaction was not visible for BSA, whereas it was still distinguishable in the ACF for TLL. This indicated that TLL had a higher affinity than BSA for the C18 surface. The study showed that TIR-FCS provides a useful tool to quantify the surfactant effect on proteins adsorption.

  11. Determination of some heavy metals (Fe, Cu, Zn and Pb) in blood by total reflection X-ray fluorescence

    Science.gov (United States)

    Bounakhla, M.; Doukkali, A.; Lalaoui, K.; Aguenaou, H.; Mokhtar, N.; Attrassi, B.

    2003-05-01

    The main purpose of this study is the interaction between nutrition (micronutrients heavy metals: Fe, Zn, Cu) and toxic heavy metals such as Pb in blood of children living in Gharb region of Morocco. This region receives all pollution carried by the Sebou river coming mainly from industrial activities. A rapid and simple analytical procedure was used for the determination of Fe, Cu and Zn trace amounts in blood by total-reflection X-ray fluorescence technique. This method is an energy dispersive XRF technique in a special geometry of primary beam, sample and detector. The sample is deposited on a plane polished surface of a suitable reflector material. It is presented as a few drops (25 μl) from a solution of blood digested in a mixture of HNO3 and H2O2 using a microwaves accelerated reaction system. The accuracy of measurements has been investigated by using certified materials. The concentration of Cu was found to be normal in all samples (\\cong1 ppm) which ruled out any interaction between this element and the others. On the other hand, amounts of Fe and Zn are very variables, suggesting an interaction between Fe and Zn. However, amounts of Pb in blood are inferior to 50 ppb, suggesting that no interaction exist with this metal and micronutrients.

  12. Characterization of GLUT4-containing vesicles in 3T3-L1 adipocytes by total internal reflection fluorescence microscopy

    Institute of Scientific and Technical Information of China (English)

    WANG Yan; ZHANG JinZhong; CHEN Yu; JIANG Li; JI Wei; XU Tao

    2009-01-01

    Insulin-responsive GLUT4 (glucose transporter 4) translocation plays a major role in regulating glucose uptake in adipose tissue and muscle. Whether or not there is a specialized secretory GSV (GLUT4 storage vesicle) pool, and more importantly how GSVs are translocated to the PM (plasma membrane) under insulin stimulation is still under debate. In the present study, we systematically analyzed the dynamics of a large number of single GLUT4-containing vesicles in 3T3-L1 adipocytes by TIRFM (total internal reflection fluorescence microscopy). We found that GLUT4-containing vesicles can be classi fled into three groups according to their mobility, namely vertical, stable, and lateral GLUT4-containing vesicles. Among these groups, vertical GLUT4-containing vesicles exclude transferrin receptors and move towards the PM specifically in response to insulin stimulation, while stable and lateral GLUT4 containing vesicles contain transferrin receptors and show no insulin responsiveness. These data demonstrate that vertical GLUT4-containing vesicles correspond to specialized secretory GSVs, which approach the PM directly and bypass the constitutive recycling pathway.

  13. Hyperspectral Sensing for Turbid Water Quality Monitoring in Freshwater Rivers: Empirical Relationship between Reflectance and Turbidity and Total Solids

    Directory of Open Access Journals (Sweden)

    Jiunn-Lin Wu

    2014-11-01

    Full Text Available Total suspended solid (TSS is an important water quality parameter. This study was conducted to test the feasibility of the band combination of hyperspectral sensing for inland turbid water monitoring in Taiwan. The field spectral reflectance in the Wu river basin of Taiwan was measured with a spectroradiometer; the water samples were collected from the different sites of the Wu river basin and some water quality parameters were analyzed on the sites (in situ as well as brought to the laboratory for further analysis. To obtain the data set for this study, 160 in situ sample observations were carried out during campaigns from August to December, 2005. The water quality results were correlated with the reflectivity to determine the spectral characteristics and their relationship with turbidity and TSS. Furthermore, multiple-regression (MR and artificial neural network (ANN were used to model the transformation function between TSS concentration and turbidity levels of stream water, and the radiance measured by the spectroradiometer. The value of the turbidity and TSS correlation coefficient was 0.766, which implies that turbidity is significantly related to TSS in the Wu river basin. The results indicated that TSS and turbidity are positively correlated in a significant way across the entire spectrum, when TSS concentration and turbidity levels were under 800 mg·L−1 and 600 NTU, respectively. Optimal wavelengths for the measurements of TSS and turbidity are found in the 700 and 900 nm range, respectively. Based on the results, better accuracy was obtained only when the ranges of turbidity and TSS concentration were less than 800 mg·L−1 and less than 600 NTU, respectively and used rather than using whole dataset (R2 = 0.93 versus 0.88 for turbidity and R2 = 0.83 versus 0.58 for TSS. On the other hand, the ANN approach can improve the TSS retrieval using MR. The accuracy of TSS estimation applying ANN (R2 = 0.66 was better than with the MR

  14. Feasibility study of total reflection X-ray fluorescence analysis using a liquid metal jet X-ray tube

    Energy Technology Data Exchange (ETDEWEB)

    Maderitsch, A.; Smolek, S. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Wien (Austria); Wobrauschek, P., E-mail: wobi@ati.ac.at [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Wien (Austria); Streli, C. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Wien (Austria); Takman, P. [Excillum AB, Finlandsgatan 14, 164 74 Kista (Sweden)

    2014-09-01

    Total reflection X-ray spectroscopy (TXRF) is a powerful analytical technique for qualitative and quantitative analysis of trace and ultratrace elements in a sample with lower limits of detection (LLDs) of pg/g to ng/g in concentration and absolute high fg levels are attainable. Several X-ray sources, from low power (few W), 18 kW rotating anodes to synchrotron radiation, are in use for the excitation and lead accordingly to their photon flux delivered on the sample the detection limits specified. Not only the power, but also the brilliance and focal shape are of importance for TXRF. A microfocus of 50–100 μm spot size or the line focus of diffraction tubes is best suited. Excillum developed a new approach in the design of a source: the liquid metal jet anode. In this paper the results achieved with this source are described. A versatile TXRF spectrometer with vacuum chamber designed at Atominstitut was used for the experiments. A multilayer monochromator selecting the intensive Ga-Kα radiation was taken and the beam was collimated by 50 μm slits. Excellent results regarding geometric beam stability, high fluorescence intensities and low background were achieved leading to detection limits in the high fg range for Ni. A 100 mm{sup 2} silicon drift detector (SDD) collimated to 80 mm{sup 2} was used to collect the fluorescence radiation. The results from measurements on single element samples are presented. - Highlights: • Using a new X-ray source for TXRF • Liquid metal jet X-ray source from Excillum • Offers improvements for lab based TXRF spectrometers • Can also be important for related techniques.

  15. Determination of trace elements in freshwater rotifers and ciliates by total reflection X-ray fluorescence spectrometry

    Science.gov (United States)

    Woelfl, S.; Óvári, M.; Nimptsch, J.; Neu, T. R.; Mages, M.

    2016-02-01

    Element determination in plankton is important for the assessment of metal contamination of aquatic environments. Until recently, it has been difficult to determine elemental content in rotifers or ciliates derived from natural plankton samples because of the difficulty in handling and separation of these fragile organisms. The aim of this study was to evaluate methods for separation of rotifers and large ciliates from natural plankton samples (μg range dry weight) and subsequent analysis of their elemental content using total-reflection X-ray fluorescence spectrometry (TXRF). Plankton samples were collected from different aquatic environments (three lakes, one river) in Chile, Argentina and Hungary. From one to eighty specimens of five rotifer species (Brachionus calyciflorus, Brachionus falcatus, Asplanchna sieboldii, Asplanchna sp., Philodina sp.) and four to twelve specimens of one large ciliate (Stentor amethystinus) were prepared according to the dry method originally developed for microcrustaceans, and analysed by TRXF following in situ microdigestion. Our results demonstrated that it possible to process these small and fragile organisms (individual dry mass: 0.17-9.39 μg ind- 1) via careful washing and preparation procedures. We found species-dependent differences of the element mass fractions for some of the elements studied (Cr, Mn, Fe, Ni, Cu, Zn, As, Pb), especially for Cu, Fe and Mn. One large rotifer species (A. sieboldii) also showed a negative correlation between individual dry weight and the element content for Pb, Ni and Cr. We conclude that our application of the in situ microdigestion-TRXF method is suitable even for rotifers and ciliates, greatly expanding the possibilities for use of plankton in biomonitoring of metal contamination in aquatic environments.

  16. Total reflection X-ray fluorescence analysis of oral fluids of women affected by osteoporosis and osteopenia

    Science.gov (United States)

    Sánchez, Héctor Jorge; Valentinuzzi, María Cecilia; Grenón, Miram; Abraham, José

    2008-12-01

    Osteoporosis is a disease characterized by low bone mass and microarchitectural deterioration of bone tissue, leading to bone fragility and an increased susceptibility to fractures; the early stage of decreased bone density is called osteopenia. More than 200 million people are affected and about 50% of post-menopausic women are expected to develop the disease. Osteoporosis, osteopenia and periodontal disease have in common several risk factors, being hyperthyroidism and smoking habits the most important ones. There is scarce information in the literature about the association between periodontal disease and osteoporosis and/or osteopenia. Some works suggest that osteoporotic women are susceptible to a higher loss of periodontal insertion, alveolar bones, and teeth. Thirty adult post-menopausic women were studied; some of them were healthy (control group) and the rest of them were undergoing some stage of osteoporosis or osteopenia. All the subjects were healthy, non-smokers, not having dental implants, and with communitarian periodontal index higher than 1(CPI > 1). Samples of saliva and gingival crevice fluid were extracted with calibrated micro-capillaries and deposited on Si reflectors. Known amounts of Ga were added to the samples in order to act as internal standard for quantification by the total reflection x-ray fluorescence technique. Experimental concentrations of several elements (P, S, Cl, K, Ca, Cr, Fe, NI, Cu, and Zn) were determined. The concentration of some elements in saliva showed different behavior as compared to gingival crevice fluid. Some critical elements of bone composition, such as Ca and Zn, present very distinguishable behavior. Improvements in the statistics are required for a better assessment of a routine method and to establish some correlation with periodontal disease. TXRF seems to be a promising method to evaluate the evolution of osteoporosis.

  17. Zinc and cadmium accumulation in single zebrafish (Danio rerio) embryos - A total reflection X-ray fluorescence spectrometry application

    Energy Technology Data Exchange (ETDEWEB)

    Mages, Margarete [UFZ - Helmholtz Centre for Environmental Research, Dept. River Ecology Brueckstr. 3a/39114 Magdeburg/Germany (Germany); University of Lueneburg, Institute of Ecology and Environmental Chemistry, Department Environmental Chemistry, Scharnhorststrasse 1/21335 Lueneburg/Germany (Germany)], E-mail: margarete.mages@ufz.de; Bandow, Nicole [UFZ - Helmholtz Centre for Environmental Research, Dept. Effect Directed Analysis, Permoser Strasse 15/ 04318 Leipzig/Germany (Germany); Kuester, Eberhard [UFZ - Helmholtz Centre for Environmental Research, Dept. Bioanalytical Ecotoxicology, Permoser Strasse 15/ 04318 Leipzig/Germany (Germany); Brack, Werner [UFZ - Helmholtz Centre for Environmental Research, Dept. Effect Directed Analysis, Permoser Strasse 15/ 04318 Leipzig/Germany (Germany); Tuempling, Wolf von [UFZ - Helmholtz Centre for Environmental Research, Dept. River Ecology Brueckstr. 3a/39114 Magdeburg/Germany (Germany)

    2008-12-15

    Trace metals such as Cadmium (Cd) and Zinc (Zn) are known to exhibit adverse effects on many aquatic organisms including early life stages of fish. In contact with contaminated sediment, fish eggs and embryos may be exposed to metals via the water phase as well as via direct contact with contaminated particles. This may result in body burdens that are difficult to predict and may vary according to individual micro scale exposure conditions. The highly sensitive total reflection X-ray fluorescence spectrometry (TXRF) may provide a tool to analyse individual embryos for internal contaminant concentrations and thus helps to develop a better understanding of dose-response relationships. To test this hypothesis, embryos of Danio rerio were exposed to Cd and Zn spiked sediment in different treatments applying an ion exchange resin for modification of bioavailable concentrations. The TXRF analysis indicated individual embryos with dramatically enhanced exposure compared to other individuals despite uniform exposure conditions on a macro scale. Ion exchanger reduced embryo Zn concentrations to values close to control value with a comparably low standard deviation. Cadmium concentrations in embryos were in the range of 4000 to 7000 {mu}g/g with a median of 5740 {mu}g/g. A commercial ion exchanger reduced individual body burdens by a factor 50 to 100. Individual peak body burdens of up to 3160 {mu}g/g were accompanied by reduced weight of the fish eggs due to early death i.e. coagulation. The investigation of exposure and effects on an individual-based scale may significantly help to reduce uncertainty and inconsistencies occurring in conventional analysis of pooled fish embryo samples.

  18. Total reflection X-ray fluorescence analysis of oral fluids of women affected by osteoporosis and osteopenia

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, Hector Jorge [Facultad de Matematica Astronomia y Fisica, Universidad Nacional de Cordoba, 5000 Cordoba (Argentina)], E-mail: jsan@famaf.unc.edu.ar; Valentinuzzi, Maria Cecilia [Facultad de Matematica Astronomia y Fisica, Universidad Nacional de Cordoba, 5000 Cordoba (Argentina); Grenon, Miram [Facultad de Odontologia, Universidad Nacional de Cordoba, 5000 Cordoba (Argentina); Abraham, Jose [Facultad de Matematica Astronomia y Fisica, Universidad Nacional de Cordoba, 5000 Cordoba (Argentina)

    2008-12-15

    Osteoporosis is a disease characterized by low bone mass and microarchitectural deterioration of bone tissue, leading to bone fragility and an increased susceptibility to fractures; the early stage of decreased bone density is called osteopenia. More than 200 million people are affected and about 50% of post-menopausic women are expected to develop the disease. Osteoporosis, osteopenia and periodontal disease have in common several risk factors, being hyperthyroidism and smoking habits the most important ones. There is scarce information in the literature about the association between periodontal disease and osteoporosis and/or osteopenia. Some works suggest that osteoporotic women are susceptible to a higher loss of periodontal insertion, alveolar bones, and teeth. Thirty adult post-menopausic women were studied; some of them were healthy (control group) and the rest of them were undergoing some stage of osteoporosis or osteopenia. All the subjects were healthy, non-smokers, not having dental implants, and with communitarian periodontal index higher than 1(CPI > 1). Samples of saliva and gingival crevice fluid were extracted with calibrated micro-capillaries and deposited on Si reflectors. Known amounts of Ga were added to the samples in order to act as internal standard for quantification by the total reflection x-ray fluorescence technique. Experimental concentrations of several elements (P, S, Cl, K, Ca, Cr, Fe, NI, Cu, and Zn) were determined. The concentration of some elements in saliva showed different behavior as compared to gingival crevice fluid. Some critical elements of bone composition, such as Ca and Zn, present very distinguishable behavior. Improvements in the statistics are required for a better assessment of a routine method and to establish some correlation with periodontal disease. TXRF seems to be a promising method to evaluate the evolution of osteoporosis.

  19. Application of CO2 Snow Jet Cleaning in Conjunction with Laboratory Based Total Reflection X-Ray Fluorescence

    Science.gov (United States)

    Schmeling, M.; Burnett, D. S.; Allton, J. H.; Rodriquez, M.; Tripa, C. E.; Veryovkin, I. V.

    2013-01-01

    The Genesis mission was the first mission returning solar material to Earth since the Apollo program [1,2]. Unfortunately the return of the space craft on September 8, 2004 resulted in a crash landing, which shattered the samples into small fragments and exposed them to desert soil and other debris. Thus only small fragments of the original collectors are available, each having different degrees of surface contamination. Thorough surface cleaning is required to allow for subsequent analysis of solar wind material embedded within. An initial cleaning procedure was developed in coordination with Johnson Space Center which focused on removing larger sized particulates and a thin film organic contamination acquired during collection in space [3]. However, many of the samples have additional residues and more rigorous and/or innovative cleaning steps might be necessary. These cleaning steps must affect only the surface to avoid leaching and re-distribution of solar wind material from the bulk of the collectors. To aid in development and identification of the most appropriate cleaning procedures each sample has to be thoroughly inspected before and after each cleaning step. Laboratory based total reflection X-ray fluorescence (TXRF) spectrometry lends itself to this task as it is a non-destructive and surface sensitive analytical method permitting analysis of elements from aluminum onward present at and near the surface of a flat substrate [4]. The suitability of TXRF has been demonstrated for several Genesis solar wind samples before and after various cleaning methods including acid treatment, gas cluster ion beam, and CO2 snow jet [5 - 7]. The latter one is non-invasive and did show some promise on one sample [5]. To investigate the feasibility of CO2 snow jet cleaning further, several flown Genesis samples were selected to be characterized before and after CO2 snow application with sample 61052 being discussed below.

  20. Determination of As concentration in earthworm coelomic fluid extracts by total-reflection X-ray fluorescence spectrometry

    Science.gov (United States)

    Allegretta, Ignazio; Porfido, Carlo; Panzarino, Onofrio; Fontanella, Maria Chiara; Beone, Gian Maria; Spagnuolo, Matteo; Terzano, Roberto

    2017-04-01

    Earthworms are often used as sentinel organisms to study As bioavailability in polluted soils. Arsenic in earthworms is mainly sequestrated in the coelomic fluids whose As content can therefore be used to asses As bioavalability. In this work, a method for determining As concentration in coelomic fluid extracts using total-reflection X-ray fluorescence spectrometry (TXRF) is presented. For this purpose coelomic fluid extracts from earthworms living in three polluted soils and one non-polluted (control) soil have been collected and analysed. A very simple sample preparation was implemented, consisting of a dilution of the extracts with polyvinyl alcohol (PVA) using a 1:8 ratio and dropwise deposition of the sample on the reflector. A detection limit of 0.2 μg/l and quantification limit of 0.6 μg/l was obtained in the diluted samples, corresponding to 2 μg/l and 6 μg/l in the coelomic fluid extracts, respectively. This allowed to quantify As concentration in coelomic fluids extracted from earthworms living in soils polluted with As at concentrations higher than 20 mg/kg (considered as a pollution threshold for agricultural soils). The TXRF method has been validated by comparison with As concentrations in standards and by analysing the same samples by ICP-MS, after acid digestion of the sample. The low limit of detection, the proven reliability of the method and the little sample preparation make TXRF a suitable, cost-efficient and ;green; technique for the analysis of As in earthworm coelomic fluid extracts for bioavailability studies.

  1. On revealing the vertical structure of nanoparticle films with elemental resolution: A total external reflection X-ray standing waves study

    Energy Technology Data Exchange (ETDEWEB)

    Zargham, Ardalan, E-mail: zargham@ifp.uni-bremen.d [Institute of Solid State Physics, University of Bremen, Otto-Hahn-Allee 1, 28359 Bremen (Germany); Schmidt, Thomas; Flege, Jan Ingo; Sauerbrey, Marc; Hildebrand, Radowan [Institute of Solid State Physics, University of Bremen, Otto-Hahn-Allee 1, 28359 Bremen (Germany); Roehe, Sarah; Baeumer, Marcus [Applied and Physical Chemistry, University of Bremen, Leobener Str. 2, 28359, Bremen (Germany); Falta, Jens [Institute of Solid State Physics, University of Bremen, Otto-Hahn-Allee 1, 28359 Bremen (Germany)

    2010-02-15

    We present a promising combination of methods to precisely determine the morphology of nanostructures, drawing on the example of monodisperse CoPt{sub 3} nanoparticle films deposited by spin coating and dip coating techniques on functionalized Au substrates. Ex-situ X-ray standing waves in total external reflection combined with X-ray reflectivity measurements were employed to determine element-specific atomic-density distributions in vertical direction.

  2. Impulsive solar X-ray bursts. 4: Polarization, directivity and spectrum of the reflected and total bremsstrahlung radiation from a beam of electrons directed toward the photosphere

    Science.gov (United States)

    Langer, S. H.; Petrosian, V.

    1976-01-01

    A Monte Carlo method is described for evaluation of the spectrum, directivity and polarization of X-rays diffusely reflected from stellar photospheres. the accuracy of the technique is evaluated through comparison with analytic results. Using the characteristics of the incident X-rays of the model for solar X-ray flares, the spectrum, directivity and polarization of the reflected and the total X-ray fluxes are evaluated. The results are compared with observations.

  3. Direct determination of trace elements in boron nitride powders by slurry sampling total reflection X-ray fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Amberger, Martin A.; Hoeltig, Michael [University of Hamburg, Institute for Inorganic and Applied Chemistry, Martin-Luther-King-Platz 6, D-20146 Hamburg (Germany); Broekaert, Jose A.C., E-mail: jose.broekaert@chemie.uni-hamburg.d [University of Hamburg, Institute for Inorganic and Applied Chemistry, Martin-Luther-King-Platz 6, D-20146 Hamburg (Germany)

    2010-02-15

    The use of slurry sampling total reflection X-ray fluorescence spectrometry (SlS-TXRF) for the direct determination of Ca, Cr, Cu, Fe, Mn and Ti in four boron nitride powders has been described. Measurements of the zeta potential showed that slurries with good stabilities can be obtained by the addition of polyethylenimine (PEI) at a concentration of 0.1 wt.% and by adjusting the pH at 4. For the optimization of the concentration of boron nitride in the slurries the net line intensities and the signal to background ratios were determined for the trace elements Ca and Ti as well as for the internal standard element Ga in the case of concentrations of boron nitride ranging from 1 to 30 mg mL{sup -1}. As a compromise with respect to high net line intensities and high signal to background ratios, concentrations of 5 mg mL{sup -1} of boron nitride were found suitable and were used for all further measurements. The limits of detection of SlS-TXRF for the boron nitride powders were found to range from 0.062 to 1.6 mug g{sup -1} for Cu and Ca, respectively. Herewith, they are higher than those obtained in solid sampling and slurry sampling graphite furnace atomic absorption spectrometry (SoS-GFAAS, SlS-GFAAS) as well as those of solid sampling electrothermal evaporation inductively coupled plasma optical emission spectrometry (SoS-ETV-ICP-OES). For Ca and Fe as well as for Cu and Fe, however, they were found to be lower than for GFAAS and for ICP-OES subsequent to wet chemical digestion, respectively. The universal applicability of SlS-TXRF to the analysis of samples with a wide variety of matrices could be demonstrated by the analysis of certified reference materials such as SiC, Al{sub 2}O{sub 3}, powdered bovine liver and borate ore with a single calibration. The correlation coefficients of the plots for the values found for Ca, Fe and Ti by SlS-TXRF in the boron nitride powders as well as in the before mentioned samples versus the reference values for the respective

  4. A rapid total reflection X-ray fluorescence protocol for micro analyses of ion profiles in Arabidopsis thaliana

    Science.gov (United States)

    Höhner, Ricarda; Tabatabaei, Samaneh; Kunz, Hans-Henning; Fittschen, Ursula

    2016-11-01

    The ion homeostasis of macro and micronutrients in plant cells and tissues is a fundamental requirement for vital biochemical pathways including photosynthesis. In nature, ion homeostasis is affected mainly by three processes: 1. Environmental stress factors, 2. Developmental effects, and 3. Loss or gain-of-function mutations in the plant genome. Here we present a rapid total reflection X-ray fluorescence (TXRF) protocol that allows for simultaneous quantification of several elements such as potassium (K), calcium (Ca), sulfur (S), manganese (Mn) and strontium (Sr) in Arabidopsis thaliana leaf specimens. Our procedure is cost-efficient and enables precise, robust and highly reproducible measurements on tissue samples as small as 0.3 mg dry weight. As shown here, we apply the TXRF procedure to detect accurately the early replacement of K by Na ions in leaves of plants exposed to soil salinity, a globally increasing abiotic stress factor. Furthermore, we were able to prove the existence of a leaf development-dependent ion gradient for K, Ca, and other divalent ions in A. thaliana; i.e. old leaves contain significantly lower K but higher Ca than young leaves. Lastly, we show that our procedure can be readily applied to reveal subtle differences in tissue-specific ion contents of plant mutants. We employed independent A. thaliana kea1kea2 loss-of-function mutants that lack KEA1 and KEA2, two highly active chloroplast K exchange proteins. We found significantly increased K levels specifically in kea1kea2 mutants, i.e. 55 mg ∗ g- 1 dry weight, compared to 40 mg ∗ g- 1 dry weight in wild type plants. The TXRF procedure can be supplemented with Flame atomic absorption (FAAS) and emission spectrometry (FAES) to expand the detection range to sodium (Na) and magnesium (Mg). Because of the small sample amounts required, this method is especially suited to probe individual leaves in single plants or even specific leaf areas. Therefore, TXRF represents a powerful method to

  5. Determination of lead in clay enameled by X-ray fluorescence technique in Total reflection and by Scanning Electron Microscopy; Determinacion de plomo en esmaltado de barro por Fluorescencia de rayos X en reflexion total y Microscopia Electronica de Barrido

    Energy Technology Data Exchange (ETDEWEB)

    Zarazua O, G.; Carapia M, L. [Instituto Nacional de Investigaciones Nucleares, C.P. 52045 Estado de Mexico (Mexico)

    2000-07-01

    This work has the objective of determining lead free in the glazed commercial stewing pans using the X-ray fluorescence technique in Total reflection (FRX) and the observation and semiquantitative determination of lead by Analytical Scanning Electron Microscopy (ASEM). (Author)

  6. Experimental infection of commercial layers with wild or attenuated Salmonella Gallinarum mutant strains: anatomic pathology, total blood cell count and serum protein levels

    Directory of Open Access Journals (Sweden)

    KO Garcia

    2013-06-01

    Full Text Available The aim of the present study was to comparatively evaluate hemogram, blood serum components and anatomopathologic alterations in commercial layers experimentally challenged with an attenuated vaccine candidate strain (SG∆cobS∆cbiA and other two pathogenic strains (SGDcobS and SGNalr of Gallinarum (SG. In total, 280 commercial layers were randomly divided into 4 groups (G1, G2, G3 and G4. At five days of age, birds from groups G1 received approximately 107 colony forming units (CFU of SGDcobS; meanwhile birds from group G2 and G3 received the same dose of SGNalr and SG∆cobS∆cbiA, respectively. Birds from G4 were not infected. At 24 hours before (DBI and 24 hours after (1 DAI, and three (3 DAI, five (5 DAI, seven (7 DAI ten (10 DAI, and fifteen (15 DAI days after the infection, 10 birds of each group were humanely killed and blood samples collected to hematological and serum tests. Samples of liver, spleen, thymus, bursa of Fabricius, kidney and heart were also collected for the histological examination. Birds inoculated with SGDcobS and SGNalr showed similar alterations in hemogram, blood serum components and anatomopathologic exams. On the other hand, the exams of birds inoculated with SG∆cobS∆cbiA strain were similar to those of the uninfected birds. However, changes could be noticed in levels of uric acid and cholesterol during the course of the infection of birds from G3. Decrease in levels of light IgG 3 DAI was also observed in birds from this group. Pyknosis in kidney cells was a microscopic alteration found in birds from G3. Further studies must be done to verify if these alterations will not interfere in the performance of the vaccinate birds with SG∆cobS∆cbiA strain.

  7. Observation of surface reduction of NiO to Ni by surface-sensitive total reflection X-ray spectroscopy using Kramers-Kronig relations

    Science.gov (United States)

    Abe, Hitoshi; Nakayama, Takeshi; Niwa, Yasuhiro; Nitani, Hiroaki; Kondoh, Hiroshi; Nomura, Masaharu

    2016-06-01

    We have developed a promising surface-sensitive X-ray absorption fine structure (XAFS) measurement method. This method is based on total reflection detection and Kramers-Kronig relations, and has been named the KK-XAFS method. Total reflection spectra are transformed via Kramers-Kronig relations to obtain XAFS spectra. KK-XAFS experiments give us surface-sensitive structural parameters, while usual EXAFS analyses yield bulk structural parameters. The total reflection spectra themselves are useful for observing and discussing time evolutions of chemical reactions at surfaces by quick scanning measurements. Chemical species are analyzed to estimate their fractions during reactions. The whole method would be named total reflection X-ray spectroscopy (TREXS). A reduction of the NiO layer at the surface of Ni (30 nm)/Si was observed in a laboratory-built TREXS in situ cell. The method would be applicable to observe chemical reactions starting at surfaces and to study their kinetics and mechanisms.

  8. Simple and rapid quantification of total carotenoids in lyophilized apricots (prunus armeniaca L.) by means of reflectance colorimetry and photoacoustic spectrometry spectroscopy

    NARCIS (Netherlands)

    Doka, O.; Ficzek, G.; Luterotti, S.; Bicanic, D.D.; Spruijt, R.B.; Buijnsters, J.; Vegvari, G.

    2013-01-01

    Photoacoustic spectroscopy (PAS) and reflectance colorimetry are suggested as new tools for the analysis of total carotenoids in lyophilized apricot powders. The data obtained by these two techniques from seven apricot cultivars were compared to those acquired by spectrophotometry and high-performan

  9. Association Mapping of Total Carotenoids in Diverse Soybean Genotypes Based on Leaf Extracts and High-Throughput Canopy Spectral Reflectance Measurements.

    Directory of Open Access Journals (Sweden)

    Arun Prabhu Dhanapal

    Full Text Available Carotenoids are organic pigments that are produced predominantly by photosynthetic organisms and provide antioxidant activity to a wide variety of plants, animals, bacteria, and fungi. The carotenoid biosynthetic pathway is highly conserved in plants and occurs mostly in chromoplasts and chloroplasts. Leaf carotenoids play important photoprotective roles and targeted selection for leaf carotenoids may offer avenues to improve abiotic stress tolerance. A collection of 332 soybean [Glycine max (L. Merr.] genotypes was grown in two years and total leaf carotenoid content was determined using three different methods. The first method was based on extraction and spectrophotometric determination of carotenoid content (eCaro in leaf tissue, whereas the other two methods were derived from high-throughput canopy spectral reflectance measurements using wavelet transformed reflectance spectra (tCaro and a spectral reflectance index (iCaro. An association mapping approach was employed using 31,253 single nucleotide polymorphisms (SNPs to identify SNPs associated with total carotenoid content using a mixed linear model based on data from two growing seasons. A total of 28 SNPs showed a significant association with total carotenoid content in at least one of the three approaches. These 28 SNPs likely tagged 14 putative loci for carotenoid content. Six putative loci were identified using eCaro, five loci with tCaro, and nine loci with iCaro. Three of these putative loci were detected by all three carotenoid determination methods. All but four putative loci were located near a known carotenoid-related gene. These results showed that carotenoid markers can be identified in soybean using extract-based as well as by high-throughput canopy spectral reflectance-based approaches, demonstrating the utility of field-based canopy spectral reflectance phenotypes for association mapping.

  10. Association Mapping of Total Carotenoids in Diverse Soybean Genotypes Based on Leaf Extracts and High-Throughput Canopy Spectral Reflectance Measurements

    Science.gov (United States)

    Dhanapal, Arun Prabhu; Ray, Jeffery D.; Singh, Shardendu K.; Hoyos-Villegas, Valerio; Smith, James R.; Purcell, Larry C.; King, C. Andy; Fritschi, Felix B.

    2015-01-01

    Carotenoids are organic pigments that are produced predominantly by photosynthetic organisms and provide antioxidant activity to a wide variety of plants, animals, bacteria, and fungi. The carotenoid biosynthetic pathway is highly conserved in plants and occurs mostly in chromoplasts and chloroplasts. Leaf carotenoids play important photoprotective roles and targeted selection for leaf carotenoids may offer avenues to improve abiotic stress tolerance. A collection of 332 soybean [Glycine max (L.) Merr.] genotypes was grown in two years and total leaf carotenoid content was determined using three different methods. The first method was based on extraction and spectrophotometric determination of carotenoid content (eCaro) in leaf tissue, whereas the other two methods were derived from high-throughput canopy spectral reflectance measurements using wavelet transformed reflectance spectra (tCaro) and a spectral reflectance index (iCaro). An association mapping approach was employed using 31,253 single nucleotide polymorphisms (SNPs) to identify SNPs associated with total carotenoid content using a mixed linear model based on data from two growing seasons. A total of 28 SNPs showed a significant association with total carotenoid content in at least one of the three approaches. These 28 SNPs likely tagged 14 putative loci for carotenoid content. Six putative loci were identified using eCaro, five loci with tCaro, and nine loci with iCaro. Three of these putative loci were detected by all three carotenoid determination methods. All but four putative loci were located near a known carotenoid-related gene. These results showed that carotenoid markers can be identified in soybean using extract-based as well as by high-throughput canopy spectral reflectance-based approaches, demonstrating the utility of field-based canopy spectral reflectance phenotypes for association mapping. PMID:26368323

  11. Association Mapping of Total Carotenoids in Diverse Soybean Genotypes Based on Leaf Extracts and High-Throughput Canopy Spectral Reflectance Measurements.

    Science.gov (United States)

    Dhanapal, Arun Prabhu; Ray, Jeffery D; Singh, Shardendu K; Hoyos-Villegas, Valerio; Smith, James R; Purcell, Larry C; King, C Andy; Fritschi, Felix B

    2015-01-01

    Carotenoids are organic pigments that are produced predominantly by photosynthetic organisms and provide antioxidant activity to a wide variety of plants, animals, bacteria, and fungi. The carotenoid biosynthetic pathway is highly conserved in plants and occurs mostly in chromoplasts and chloroplasts. Leaf carotenoids play important photoprotective roles and targeted selection for leaf carotenoids may offer avenues to improve abiotic stress tolerance. A collection of 332 soybean [Glycine max (L.) Merr.] genotypes was grown in two years and total leaf carotenoid content was determined using three different methods. The first method was based on extraction and spectrophotometric determination of carotenoid content (eCaro) in leaf tissue, whereas the other two methods were derived from high-throughput canopy spectral reflectance measurements using wavelet transformed reflectance spectra (tCaro) and a spectral reflectance index (iCaro). An association mapping approach was employed using 31,253 single nucleotide polymorphisms (SNPs) to identify SNPs associated with total carotenoid content using a mixed linear model based on data from two growing seasons. A total of 28 SNPs showed a significant association with total carotenoid content in at least one of the three approaches. These 28 SNPs likely tagged 14 putative loci for carotenoid content. Six putative loci were identified using eCaro, five loci with tCaro, and nine loci with iCaro. Three of these putative loci were detected by all three carotenoid determination methods. All but four putative loci were located near a known carotenoid-related gene. These results showed that carotenoid markers can be identified in soybean using extract-based as well as by high-throughput canopy spectral reflectance-based approaches, demonstrating the utility of field-based canopy spectral reflectance phenotypes for association mapping.

  12. Novel Folding Large-Scale Optical Switch Matrix with Total Internal Reflection Mirrors on Silicon-on-Insulator by Anisotropy Chemical Etching

    Institute of Scientific and Technical Information of China (English)

    LIU Jing-Wei; YU Jin-Zhong; CHEN Shao-Wu

    2005-01-01

    A compact optical switch matrix was designed, in which light circuits were folded by total internal reflective (TIR) mirrors. Two key elements, 2 × 2 switch and TIR mirror, have been fabricated on silicon-on-insulator wafer by anisotropy chemical etching. The 2 × 2 switch showed very low power consumption of 140mW and avery high speed of 8 ± 1 μs. An improved design for the TIR mirror was developed, and the fabricated mirror with smooth and vertical reflective facet showed low excess loss of 0.7 ± 0.3 dB at 1.55μm.

  13. Impulsive solar X-ray bursts. III - Polarization, directivity, and spectrum of the reflected and total bremsstrahlung radiation from a beam of electrons directed toward the photosphere

    Science.gov (United States)

    Langer, S. H.; Petrosian, V.

    1977-01-01

    The paper presents the spectrum, directivity, and state of polarization of the bremsstrahlung radiation expected from a beam of high-energy electrons spiraling along radial magnetic field lines toward the photosphere. A Monte Carlo method is then described for evaluation of the spectrum, directivity, and polarization of X-rays diffusely reflected from stellar photospheres. The accuracy of the technique is evaluated through comparison with analytic results. The calculated characteristics of the incident X-rays are used to evaluate the spectrum, directivity, and polarization of the reflected and total X-ray fluxes. The results are compared with observations.

  14. Optical interrupter based in the internal total reflection of spatial solitons at nonlinear saturable interfaces; Interruptores opticos basados en reflexion interna total de solitones espaciales en interfaces no lineales saturables

    Energy Technology Data Exchange (ETDEWEB)

    Alvarado-Mendez, E.; Torres-Cisneros, M.; Gutierrez-Hernandez, D. A.; Andrade-Lucio, J. A.; Rojas-Lagunas, R.; Pedraza-Ortega, J. C.; Torres Cisneros, G. E. [Universidad de Guanajuato, Guanajuato (Mexico); Sanchez Mondragon, J. J. [Universidad Autonoma del Estado de Morelos, Morelos (Mexico); Flores-Alvarado, G. [Preparatoria por Cooperacion Domingo Arenas, Tlaxcala (Mexico)

    2001-06-01

    We study the reflection of one-dimensional spatial soliton at the nonlinear interface between a saturable type medium and linear medium. Our study makes emphasis on determining the physical conditions under which the beam reflected by the interface is still a spatial soliton. Depended the incidence angle we find three critical regions for spatial solitons in the interface. We observed nonlinear Goos- Haechen shift is determined if reflection angle are conserved. Finally, we present preliminary experimental results in SBN61:Ce of the total internal reflection of one dimensional beam. [Spanish] Estudiamos la reflexion de un soliton espacial unidimensional en una interfase formada por un medio no lineal saturable y un medio lineal. Nuestros estudios hacen enfasis en determinar las condiciones fisicas bajo las cuales el haz reflejado por la interfase no lineal sigue siendo soliton. Encontramos tres regiones criticas para un soliton especial en la interfase, dependiendo del valor que tome el angulo de incidencia. Asi mismo observamos corrimiento Goos-Haechen no lineal que es determinante para la conservacion del angulo de reflexion. Finalmente, presentamos resultados preliminares experimentales en SBN61:Ce de la reflexion interna total de un haz unidimensional.

  15. Simple method of determination of copper, mercury and lead in potable water with preliminary pre-concentration by total reflection X-ray fluorescence spectrometry

    Science.gov (United States)

    Hołyńska, B.; Ostachowicz, B.; Wȩgrzynek, D.

    1996-06-01

    Total reflection X-ray fluorescence spectrometry and chemical pre-concentration procedures have been applied for the analysis of trace concentrations of copper, mercury, and lead in drinking water samples. A simple total reflection module has been used in X-ray measurements. The elements under investigation were pre-concentrated by complexation using a mixture of carbamates followed by solvent extraction with methyl isobutyl ketone. The preconcentration procedure was tested with the use of twice-distilled water samples and samples of mineral and tap water spiked with known additions of copper, mercury, and lead. The obtained recovery and precision values are presented. The minimum detection limits for the determination of these elements in mineral and tap water samples were found to be 40 ng l -1, 60 ng l -1, and 60 ng l -1, respectively.

  16. Direct analysis of blood serum by total reflection X-ray fluorescence spectrometry and application of an artificial neural network approach for cancer diagnosis*1

    Science.gov (United States)

    Hernández-Caraballo, Edwin A.; Marcó-Parra, Lué M.

    2003-12-01

    Iron, copper, zinc and selenium were determined directly in serum samples from healthy individuals ( n=33) and cancer patients ( n=27) by total reflection X-ray fluorescence spectrometry using the Compton peak as internal standard [L.M. Marcó P. et al., Spectrochim. Acta Part B 54 (1999) 1469-1480]. The standardized concentrations of these elements were used as input data for two-layer artificial neural networks trained with the generalized delta rule in order to classify such individuals according to their health status. Various artificial neural networks, comprising a linear function in the input layer, a hyperbolic tangent function in the hidden layer and a sigmoid function in the output layer, were evaluated for such a purpose. Of the networks studied, the (4:4:1) gave the highest estimation (98%) and prediction rates (94%). The latter demonstrates the potential of the total reflection X-ray fluorescence spectrometry/artificial neural network approach in clinical chemistry.

  17. Total reflection X-ray fluorescence spectrometric determination of elements in water hyacinth from the Lerma River

    Energy Technology Data Exchange (ETDEWEB)

    Tejeda, S. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico); Instituto Tecnologico de Toluca, Division de Estudios de Posgrado e Investigacion, Apartado Postal 890, Metepec, C.P. 52149 (Mexico); Zarazua, G., E-mail: graciela.zarazua@inin.gob.m [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico); Avila-Perez, P. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico); Instituto Tecnologico de Toluca, Division de Estudios de Posgrado e Investigacion, Apartado Postal 890, Metepec, C.P. 52149 (Mexico); Carapia-Morales, L. [Instituto Nacional de Investigaciones Nucleares, Gerencia de Ciencias Ambientales, Apartado Postal 18-1027, Mexico D.F., C.P. 11801 (Mexico); Martinez, T. [Universidad Nacional Autonoma de Mexico, Facultad de Quimica, Mexico D.F. (Mexico)

    2010-06-15

    The Lerma River is one of the most polluted body water in Mexico. For this reason, only the highly resistant organisms such as water hyacinth are able to reproduce in this river. The aim of this work was to evaluate the concentration of K, S, Fe, Ca, Mn, Ti, Zn, Sr, Rb, Cu, Cr, Ni, Pb and Br in roots of water hyacinth (Eichhornia crassipes) from the Lerma River. The samples were collected from five sites in the river and analyzed in triplicate using a TXRF Spectrometer 'TX-2000 Ital Structures' with a Si(Li) detector and a resolution of 140 eV (FWHM) at Mn K{alpha}. A Mo tube (40 kV, 30 mA) with 17.4 KeV excitation energy was used for a counting time of 500 s. Results show that the average metal concentration in the water hyacinth roots decrease in the following order: K (9698.2 {mu}g/g) > S (7593.3 {mu}g/g) > Fe (4406.6 {mu}g/g) > Ca (2601.8 {mu}g/g) > Mn (604.2 {mu}g/g) > Ti (230.7 {mu}g/g) > Zn (51.65 {mu}g/g) > Sr (43.55 {mu}g/g) > Rb (18.61 {mu}g/g) > Cu (12.78 {mu}g/g) > Cr (6.45 {mu}g/g) > Ni (4.68 {mu}g/g) > Pb (4.32 {mu}g/g) > Br (4.31 {mu}g/g) and the bioconcentration factors in the water hyacinth decrease in the sequence: Ti > Fe > Mn > Cu > Ni > Zn > S > Pb > Rb > K > Cr > Sr > Br > Ca. The concentrations in roots of water hyacinth reflect the high pollution level of the river.

  18. Total reflection X-ray fluorescence spectrometric determination of elements in water hyacinth from the Lerma River

    Science.gov (United States)

    Tejeda, S.; Zarazúa, G.; Ávila-Pérez, P.; Carapia-Morales, L.; Martínez, T.

    2010-06-01

    The Lerma River is one of the most polluted body water in Mexico. For this reason, only the highly resistant organisms such as water hyacinth are able to reproduce in this river. The aim of this work was to evaluate the concentration of K, S, Fe, Ca, Mn, Ti, Zn, Sr, Rb, Cu, Cr, Ni, Pb and Br in roots of water hyacinth ( Eichhornia crassipes) from the Lerma River. The samples were collected from five sites in the river and analyzed in triplicate using a TXRF Spectrometer 'TX-2000 Ital Structures' with a Si(Li) detector and a resolution of 140 eV (FWHM) at Mn Kα. A Mo tube (40 kV, 30 mA) with 17.4 KeV excitation energy was used for a counting time of 500 s. Results show that the average metal concentration in the water hyacinth roots decrease in the following order: K (9698.2 µg/g) > S (7593.3 µg/g) > Fe (4406.6 µg/g) > Ca (2601.8 µg/g) > Mn (604.2 µg/g) > Ti (230.7 µg/g) > Zn (51.65 µg/g) > Sr (43.55 µg/g) > Rb (18.61 µg/g) > Cu (12.78 µg/g) > Cr (6.45 µg/g) > Ni (4.68 µg/g) > Pb (4.32 µg/g) > Br (4.31 µg/g) and the bioconcentration factors in the water hyacinth decrease in the sequence: Ti > Fe > Mn > Cu > Ni > Zn > S > Pb > Rb > K > Cr > Sr > Br > Ca. The concentrations in roots of water hyacinth reflect the high pollution level of the river.

  19. Multivariate analysis of attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopic data to confirm phase partitioning in methacrylate-based dentin adhesive.

    Science.gov (United States)

    Ye, Qiang; Parthasarathy, Ranganathan; Abedin, Farhana; Laurence, Jennifer S; Misra, Anil; Spencer, Paulette

    2013-12-01

    Water is ubiquitous in the mouths of healthy individuals and is a major interfering factor in the development of a durable seal between the tooth and composite restoration. Water leads to the formation of a variety of defects in dentin adhesives; these defects undermine the tooth-composite bond. Our group recently analyzed phase partitioning of dentin adhesives using high-performance liquid chromatography (HPLC). The concentration measurements provided by HPLC offered a more thorough representation of current adhesive performance and elucidated directions to be taken for further improvement. The sample preparation and instrument analysis using HPLC are, however, time-consuming and labor-intensive. The objective of this work was to develop a methodology for rapid, reliable, and accurate quantitative analysis of near-equilibrium phase partitioning in adhesives exposed to conditions simulating the wet oral environment. Analysis by Fourier transform infrared (FT-IR) spectroscopy in combination with multivariate statistical methods, including partial least squares (PLS) regression and principal component regression (PCR), were used for multivariate calibration to quantify the compositions in separated phases. Excellent predictions were achieved when either the hydrophobic-rich phase or the hydrophilic-rich phase mixtures were analyzed. These results indicate that FT-IR spectroscopy has excellent potential as a rapid method of detection and quantification of dentin adhesives that experience phase separation under conditions that simulate the wet oral environment.

  20. Applying Attenuated Total Reflection-Mid-Infrared (ATR-MIR) Spectroscopy to Detect Hairtail Surimi in Mixed Surimi and Their Surimi Products.

    Science.gov (United States)

    You, Zhao-hong; Liu, Zi-hao; Gong, Chao-yong; Yang, Xiao-ling; Cheng, Fang

    2015-10-01

    ATR-MIR spectroscopic analysis was used to classify sliver carp surimi and surimi products adulterated with different levels of hairtail surimi. Five chemometric methods, including SIMCA (soft independent modeling class of analogies), KNN (K-nearest neighbor), SVR (support vector machines regression), PLSDA (partial least squares discriminate analysis) and ID3 (interative dicremiser version 3) Decision tree were used to build the classifying models. And the performances of the models were compared. Results showed that for both cooked and uncooked mixed surimi samples, better classifications were obtained using SIMCA model, the percentage of the correct classification reached 96.59% and 96.43%, and the corresponding RMSECV were 0.185 7 and 0.189 8, r value were 0.988 0 and 0.994 1 respectively. The results of this study demonstrated for the first time that ATR-MIR spectroscopy combined with chemometrics method can be used to classify sliver carp surimi and surimi products adulterated with different levels of hairtail surimi.

  1. Secondary structure of the intact H+,K+ -ATPase and of its membrane-embedded region. An attenuated total reflection infrared spectroscopy, circular dichroism and Raman spectroscopy study

    NARCIS (Netherlands)

    Raussens, V.; Jongh, H. de; Pézolet, M.; Ruysschaert, J.-M.; Goormaghtigh, E.

    1998-01-01

    Models of P-type ATPase predict that membrane-embedded fragments represent about 20% of the protein and adopt an all-α-helical structure. While this prediction was confirmed for the Ca2+ -ATPase [Corbalan-Garcia, S., Teruel, J., Villalain, J. and Gomez-Fernandez, J. (1994) Biochemistry 33, 8247-8254

  2. Rapid analysis of effluents generated by the dairy industry for fat determination by preconcentration in nylon membranes and attenuated total reflectance infrared spectroscopy measurement.

    Science.gov (United States)

    Moliner Martínez, Y; Muñoz-Ortuño, M; Herráez-Hernández, R; Campíns-Falcó, P

    2014-02-01

    This paper describes a new approach for the determination of fat in the effluents generated by the dairy industry which is based on the retention of fat in nylon membranes and measurement of the absorbances on the membrane surface by ATR-IR spectroscopy. Different options have been evaluated for retaining fat in the membranes using milk samples of different origin and fat content. Based on the results obtained, a method is proposed for the determination of fat in effluents which involves the filtration of 1 mL of the samples through 0.45 µm nylon membranes of 13 mm diameter. The fat content is then determined by measuring the absorbance of band at 1745 cm(-1). The proposed method can be used for the direct estimation of fat at concentrations in the 2-12 mg/L interval with adequate reproducibility. The intraday precision, expressed as coefficients of variation CVs, were ≤ 11%, whereas the interday CVs were ≤ 20%. The method shows a good tolerance towards conditions typically found in the effluents generated by the dairy industry. The most relevant features of the proposed method are simplicity and speed as the samples can be characterized in a few minutes. Sample preparation does not involve either additional instrumentation (such as pumps or vacuum equipment) or organic solvents or other chemicals. Therefore, the proposed method can be considered a rapid, simple and cost-effective alternative to gravimetric methods for controlling fat content in these effluents during production or cleaning processes.

  3. Real-time feedback control using online attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy for continuous flow optimization and process knowledge.

    Science.gov (United States)

    Skilton, Ryan A; Parrott, Andrew J; George, Michael W; Poliakoff, Martyn; Bourne, Richard A

    2013-10-01

    The use of automated continuous flow reactors is described, with real-time online Fourier transform infrared spectroscopy (FT-IR) analysis to enable rapid optimization of reaction yield using a self-optimizing feedback algorithm. This technique has been applied to the solvent-free methylation of 1-pentanol with dimethyl carbonate using a γ-alumina catalyst. Calibration of the FT-IR signal was performed using gas chromatography to enable quantification of yield over a wide variety of flow rates and temperatures. The use of FT-IR as a real-time analytical technique resulted in an order of magnitude reduction in the time and materials required compared to previous studies. This permitted a wide exploration of the parameter space to provide process understanding and validation of the optimization algorithms.

  4. Monitoring of an esterification reaction by on-line direct liquid sampling mass spectrometry and in-line mid infrared spectrometry with an attenuated total reflectance probe

    Energy Technology Data Exchange (ETDEWEB)

    Owen, Andrew W.; McAulay, Edith A.J. [WestCHEM, Department of Pure and Applied Chemistry and CPACT, University of Strathclyde, 295 Cathedral Street, Glasgow, G1 1XL (United Kingdom); Nordon, Alison, E-mail: alison.nordon@strath.ac.uk [WestCHEM, Department of Pure and Applied Chemistry and CPACT, University of Strathclyde, 295 Cathedral Street, Glasgow, G1 1XL (United Kingdom); Littlejohn, David, E-mail: d.littlejohn@strath.ac.uk [WestCHEM, Department of Pure and Applied Chemistry and CPACT, University of Strathclyde, 295 Cathedral Street, Glasgow, G1 1XL (United Kingdom); Lynch, Thomas P. [WestCHEM, Department of Pure and Applied Chemistry and CPACT, University of Strathclyde, 295 Cathedral Street, Glasgow, G1 1XL (United Kingdom); Lancaster, J. Steven [Hull Research and Technology Centre, BP Chemicals, Hull, HU12 8DS (United Kingdom); Wright, Robert G. [Thermo Fisher Scientific, Winsford, Cheshire, CW7 3GA (United Kingdom)

    2014-11-07

    Highlights: • High efficiency thermal vaporiser designed and used for on-line reaction monitoring. • Concentration profiles of all reactants and products obtained from mass spectra. • By-product formed from the presence of an impurity detected by MS but not MIR. • Mass spectrometry can detect trace and bulk components unlike molecular spectrometry. - Abstract: A specially designed thermal vaporiser was used with a process mass spectrometer designed for gas analysis to monitor the esterification of butan-1-ol and acetic anhydride. The reaction was conducted at two scales: in a 150 mL flask and a 1 L jacketed batch reactor, with liquid delivery flow rates to the vaporiser of 0.1 and 1.0 mL min{sup −1}, respectively. Mass spectrometry measurements were made at selected ion masses, and classical least squares multivariate linear regression was used to produce concentration profiles for the reactants, products and catalyst. The extent of reaction was obtained from the butyl acetate profile and found to be 83% and 76% at 40 °C and 20 °C, respectively, at the 1 L scale. Reactions in the 1 L reactor were also monitored by in-line mid-infrared (MIR) spectrometry; off-line gas chromatography (GC) was used as a reference technique when building partial least squares (PLS) multivariate calibration models for prediction of butyl acetate concentrations from the MIR spectra. In validation experiments, good agreement was achieved between the concentration of butyl acetate obtained from in-line MIR spectra and off-line GC. In the initial few minutes of the reaction the profiles for butyl acetate derived from on-line direct liquid sampling mass spectrometry (DLSMS) differed from those of in-line MIR spectrometry owing to the 2 min transfer time between the reactor and mass spectrometer. As the reaction proceeded, however, the difference between the concentration profiles became less noticeable. DLSMS had advantages over in-line MIR spectrometry as it was easier to generate concentration profiles for all the components in the reaction. Also, it was possible to detect the presence of a simulated impurity of ethanol (at levels of 2.6 and 9.1% mol/mol) in butan-1-ol, and the resulting production of ethyl acetate, by DLSMS, but not by in-line MIR spectrometry.

  5. Rapid discrimination and characterization of vanilla bean extracts by attenuated total reflection infrared spectroscopy and selected ion flow tube mass spectrometry.

    Science.gov (United States)

    Sharp, Michael D; Kocaoglu-Vurma, Nurdan A; Langford, Vaughan; Rodriguez-Saona, Luis E; Harper, W James

    2012-03-01

    Vanilla beans have been shown to contain over 200 compounds, which can vary in concentration depending on the region where the beans are harvested. Several compounds including vanillin, p-hydroxybenzaldehyde, guaiacol, and anise alcohol have been found to be important for the aroma profile of vanilla. Our objective was to evaluate the performance of selected ion flow tube mass spectrometry (SIFT-MS) and Fourier-transform infrared (FTIR) spectroscopy for rapid discrimination and characterization of vanilla bean extracts. Vanilla extracts were obtained from different countries including Uganda, Indonesia, Papua New Guinea, Madagascar, and India. Multivariate data analysis (soft independent modeling of class analogy, SIMCA) was utilized to determine the clustering patterns between samples. Both methods provided differentiation between samples for all vanilla bean extracts. FTIR differentiated on the basis of functional groups, whereas the SIFT-MS method provided more specific information about the chemical basis of the differentiation. SIMCA's discriminating power showed that the most important compounds responsible for the differentiation between samples by SIFT-MS were vanillin, anise alcohol, 4-methylguaiacol, p-hydroxybenzaldehyde/trimethylpyrazine, p-cresol/anisole, guaiacol, isovaleric acid, and acetic acid. ATR-IR spectroscopy analysis showed that the classification of samples was related to major bands at 1523, 1573, 1516, 1292, 1774, 1670, 1608, and 1431 cm(-1) , associated with vanillin and vanillin derivatives.

  6. Comparison of methodologies for separation of fungal isolates using Fourier transform infrared (FTIR) spectroscopy and Fourier transform infrared-attenuated total reflectance (FTIR-ATR) microspectroscopy.

    Science.gov (United States)

    Oberle, Jennifer; Dighton, John; Arbuckle-Keil, Georgia

    2015-11-01

    Twenty distinct fungal isolates were analysed using three methods of sample preparation for FTIR spectroscopy and FTIR-ATR microspectroscopy to test for differences in surface chemical composition between living and dried fungal samples, as well as differences between surface chemistry and overall chemistry of homogenized dried samples. Results indicated that visually the FTIR spectra of different fungi are remarkably similar with subtle discernable differences, which statistical analysis of the spectra supported. Within each data set, different fungal isolates were responsible for statistical differences. Lack of congruence between each of the methods used suggests that determination of chemical composition is highly dependent upon the method of sample preparation and analysis (surface vs. whole) applied.

  7. Quantitative evaluation by attenuated total reflectance infrared (ATR-FTIR) spectroscopy of the chemical composition of decayed wood preserved in waterlogged conditions.

    Science.gov (United States)

    Pizzo, Benedetto; Pecoraro, Elisa; Alves, Ana; Macchioni, Nicola; Rodrigues, José Carlos

    2015-01-01

    This paper reports on the assessment of lignin and holocellulose by means of ATR-FTIR analysis and multivariate PLS regression. The analysis was conducted on 59 samples coming from different excavations where wood had been preserved in waterlogged conditions. A range of results from different wood species (Alnus sp.p., Cupressus sempervirens, Larix decidua, Picea abies, Pinus sp.p., Quercus sp.p., Ulmus sp.p.), states of preservation, waterlogged environments, and burial times are presented. A calibration model was selected after comparing different reference data (samples extracted and not-extracted, and ash-rich and ash-free bases of calculation for the calibration values), and two different post-acquisition spectroscopic manipulations (both in terms of normalisation procedures and of spectral ranges used for the calibration). Results showed that the best models were different depending on which considered component (lignin or holocellulose) was measured and to which data set (softwood or hardwood) the samples belonged. It is shown that the predictive ability of the models is affected by high ash content (too contaminated samples had to be excluded in order to attain good results, because of excessive overlapping of bands related to the inorganic fraction) but not by the preliminary extraction of sample. Furthermore, the stability of best models is also demonstrated and a procedure of external validation carried out on an external set of samples confirmed the general validity of the identified models.

  8. Characterization of developmental immature fiber (im) mutant and Texas Marker-1 (TM-1) cotton fibers by Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) spectroscopy

    Science.gov (United States)

    The immature fiber (im) mutant is one type of cotton fiber mutants with unique characteristics of non-fluffy cotton bolls. Compared to its near-isogenic wild type Texas Marker-1 (TM-1), im fiber has thin secondary cell wall and is less mature. In this work, we applied the previously proposed princip...

  9. Preliminary evidence of oxidation in standard oven drying of cotton: attenuated total reflectance/ Fourier transform spectroscopy, colorimetry, and particulate matter formation

    Science.gov (United States)

    Moisture is paramount to cotton fiber properties dictating harvesting, ginning, storage and spinning as well as others. Currently, oven drying in air is often utilized to generate the percentage of moisture in cotton fibers. Karl Fischer Titration another method for cotton moisture, has been compa...

  10. Wide-angle, high-extinction-ratio, infrared polarizing beam splitters using frustrated total internal reflection by an embedded centrosymmetric multilayer

    Science.gov (United States)

    Perla, Siva R.; Azzam, R. M. A.

    2007-07-01

    A centrosymmetric multilayer stack of two transparent thin-film materials, which is embedded in a high-index prism, is designed to function as an efficient polarizer or polarizing beam splitter (PBS) under conditions of frustrated total internal reflection over an extended range of incidence angles. The S(LH)kLHL(HL)kS multilayer structure consists of a high-index center layer H sandwiched between two identical low-index films L and high-index-low-index bilayers repeated (k times) on both sides of the central trilayer maintaining the symmetry of the entire stack. For a given set of refractive indices, all possible solutions for the thicknesses of the layers that suppress the reflection of p-polarized light at a specified angle, and the associated reflectance of the system for the orthogonal s polarization, are determined. The angular and spectral sensitivities of polarizing multilayer stacks employing 3, 7, 11, 15, and 19 layers of BaF2 and PbTe thin films embedded in a ZnS prism, operating at λ=10.6 μm, are presented. The 15- and 19-layer stack designs achieve extinction ratios (ER) >30 dB in both reflection and transmission over a 46°-56° field of view inside the prism. Spectral analysis reveals additional discrete polarizing wavelengths other than the design wavelength (λ=10.6 μm). The 11-, 15-, and 19-layer designs function as effective s-reflection polarizers (|Rs|2>99%) over a 2-3 μm bandwidth. The effect of decreasing the refractive index contrast between the H and L layers on the resulting ER is also considered.

  11. Slow neutron total cross-section, transmission and reflection calculation for poly- and mono-NaCl and PbF2 crystals

    Science.gov (United States)

    Mansy, Muhammad S.; Adib, M.; Habib, N.; Bashter, I. I.; Morcos, H. N.; El-Mesiry, M. S.

    2016-10-01

    A detailed study about the calculation of total neutron cross-section, transmission and reflection from crystalline materials was performed. The developed computer code is approved to be sufficient for the required calculations, also an excellent agreement has been shown when comparing the code results with the other calculated and measured values. The optimal monochromator and filter parameters were discussed in terms of crystal orientation, mosaic spread, and thickness. Calculations show that 30 cm thick of PbF2 poly-crystal is an excellent cold neutron filter producing neutron wavelengths longer than 0.66 nm needed for the investigation of magnetic structure experiments. While mono-crystal filter PbF2 cut along its (1 1 1), having mosaic spread (η = 0.5°) and thickness 10 cm can only transmit thermal neutrons of the desired wavelengths and suppress epithermal and γ-rays forming unwanted background, when it is cooled to liquid nitrogen temperature. NaCl (2 0 0) and PbF2 (1 1 1) monochromator crystals having mosaic spread (η = 0.5°) and thickness 10 mm shows high neutron reflectivity for neutron wavelengths (λ = 0.114 nm and λ = 0.43 nm) when they used as a thermal and cold neutron monochromators respectively with very low contamination from higher order reflections.

  12. Si-prism-array coupled terahertz-wave parametric oscillator with pump light totally reflected at the terahertz-wave exit surface.

    Science.gov (United States)

    Zhang, Ruiliang; Qu, Yanchen; Zhao, Weijiang; Liu, Chuang; Chen, Zhenlei

    2016-09-01

    A Si-prism-array coupled terahertz (THz)-wave parametric oscillator with the pump totally reflected at the THz-wave exit surface (PR-Si-TPO) is demonstrated by manufacturing an 800 nm air gap between the crystal and the Si-prism array. Influence on the total reflection of the pump from the Si prisms is eliminated and efficient coupling of the THz wave is ensured by using this air gap. When the THz-wave frequency varies from 1.8 to 2.3 THz, compared with a Si-prism-array coupled TPO (Si-TPO) with the pump transmitting through the crystal directly, the THz-wave output energy is enhanced by 20-50 times, and the oscillating threshold is reduced by 10%-35%. Furthermore, the high end of the THz-wave frequency tuning range of the PR-Si-TPO is expanded to 3.66 THz compared with 2.5 THz for the Si-TPO.

  13. Versatile microfluidic total internal reflection (TIR)-based devices: application to microbeads velocity measurement and single molecule detection with upright and inverted microscope.

    Science.gov (United States)

    Le, Nam Cao Hoai; Yokokawa, Ryuji; Dao, Dzung Viet; Nguyen, Thien Duy; Wells, John C; Sugiyama, Susumu

    2009-01-21

    A poly(dimethylsiloxane) (PDMS) chip for Total Internal Reflection (TIR)-based imaging and detection has been developed using Si bulk micromachining and PDMS casting. In this paper, we report the applications of the chip on both inverted and upright fluorescent microscopes and confirm that two types of sample delivery platforms, PDMS microchannel and glass microchannel, can be easily integrated depending on the magnification of an objective lens needed to visualize a sample. Although any device configuration can be achievable, here we performed two experiments to demonstrate the versatility of the microfluidic TIR-based devices. The first experiment was velocity measurement of Nile red microbeads with nominal diameter of 500 nm in a pressure-driven flow. The time-sequenced fluorescent images of microbeads, illuminated by an evanescent field, were cross-correlated by a Particle Image Velocimetry (PIV) program to obtain near-wall velocity field of the microbeads at various flow rates from 500 nl/min to 3000 nl/min. We then evaluated the capabilities of the device for Single Molecule Detection (SMD) of fluorescently labeled DNA molecules from 30 bp to 48.5 kbp and confirm that DNA molecules as short as 1105 bp were detectable. Our versatile, integrated device could provide low-cost and fast accessibility to Total Internal Reflection Fluorescent Microscopy (TIRFM) on both conventional upright and inverted microscopes. It could also be a useful component in a Micro-Total Analysis System (micro-TAS) to analyze nanoparticles or biomolecules near-wall transport or motion.

  14. Determination of trace elements in Syrian medicinal plants and their infusions by energy dispersive X-ray fluorescence and total reflection X-ray fluorescence spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Khuder, A. [Department of Chemistry, Atomic Energy Commission, P.O. Box 6091, Damascus (Syrian Arab Republic)], E-mail: scientific2@aec.org.sy; Sawan, M.Kh.; Karjou, J. [Department of Chemistry, Atomic Energy Commission, P.O. Box 6091, Damascus (Syrian Arab Republic); Razouk, A.K. [Department of Agriculture, Atomic Energy Commission, P.O. Box 6091, Damascus (Syrian Arab Republic)

    2009-07-15

    X-ray fluorescence (XRF) and total-reflection X-ray fluorescence (TXRF) techniques suited well for a multi-element determination of K, Ca, Mn, Fe, Cu, Zn, Rb, and Sr in some Syrian medicinal plant species. The accuracy and the precision of both techniques were verified by analyzing the Standard Reference Materials (SRM) peach-1547 and apple leaves-1515. A good agreement between the measured concentrations of the previously mentioned elements and the certified values were obtained with errors less than 10.7% for TXRF and 15.8% for XRF. The determination of Br was acceptable only by XRF with an error less than 24%. Furthermore, the XRF method showed a very good applicability for the determination of K, Ca, Mn, Fe, Cu, Zn, Rb, Sr, and Br in infusions of different Syrian medicinal plant species, namely anise (Anisum vulgare), licorice root (Glycyrrhiza glabra), and white wormwood (Artemisia herba-alba)

  15. Determination of trace elements in Syrian medicinal plants and their infusions by energy dispersive X-ray fluorescence and total reflection X-ray fluorescence spectrometry

    Science.gov (United States)

    Khuder, A.; Sawan, M. Kh.; Karjou, J.; Razouk, A. K.

    2009-07-01

    X-ray fluorescence (XRF) and total-reflection X-ray fluorescence (TXRF) techniques suited well for a multi-element determination of K, Ca, Mn, Fe, Cu, Zn, Rb, and Sr in some Syrian medicinal plant species. The accuracy and the precision of both techniques were verified by analyzing the Standard Reference Materials (SRM) peach-1547 and apple leaves-1515. A good agreement between the measured concentrations of the previously mentioned elements and the certified values were obtained with errors less than 10.7% for TXRF and 15.8% for XRF. The determination of Br was acceptable only by XRF with an error less than 24%. Furthermore, the XRF method showed a very good applicability for the determination of K, Ca, Mn, Fe, Cu, Zn, Rb, Sr, and Br in infusions of different Syrian medicinal plant species, namely anise ( Anisum vulgare), licorice root ( Glycyrrhiza glabra), and white wormwood ( Artemisia herba-alba).

  16. Monitoring environmental pollution of trace elements in tree-rings by synchrotron radiation total reflection X-ray fluorescence analysis (SR-TXRF)

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Silvana [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Civil, Arquitetura e Urbanismo]. E-mail: Silvana@fec.unicamp.br; Vives, Ana Elisa S. de [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil). Faculdade de Engenharia, Arquitetura e Urbanismo]. E-mail: aesvives@unimep.br; Brienza, Sandra Maria B. [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil) Faculdade de Ciencias Matematicas, da Natureza e de Tecnologia da Informacao]. E-mail: sbrienza@unimep.br; Medeiros, Jean Gabriel S.; Tomazello Filho, Mario [Sao Paulo Univ., Piracicaba, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz]. E-mail: jeangm@esalq.usp.br; mtomazel@esalq.usp.br; Zucchi, Orgheda L.A.D. [Sao Paulo Univ., Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas]. E-mail: olzucchi@fcfrp.usp.br; Nascimento Filho, Virgilio F. [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil). Lab. de Instrumentacao Nuclear]. E-mail: virgilio@cena.usp.br

    2005-07-01

    This paper aims to study the environmental pollution in the tree development, as a manner to evaluate its use as bioindicator in urban and country sides. The sample collecting was carry out in Piracicaba city, Sao Paulo State, that presents high level of environmental contamination of the water, soil and air, due industrial activities, vehicles combustion, sugar-cane leaves burning in the harvesting, etc. It was selected the Caesalpinia peltophoroides ('Sibipiruna') specie because its very used in urban arborization. It was employed the analytical technique named total reflection X-ray fluorescence (TXRF) to identify and quantify the elements and metals of nutritional and toxicological importance in the wood samples. The analysis was done in the Brazilian Synchrotron Light Laboratory, using a white beam for excitation and a Si(Li) detector for characteristic X-ray detection. It was quantified the P, K, Ca, Ti, Fe, Sr, Ba e Pb elements. (author)

  17. Three-dimensional particle tracking around microstructures in water via total internal reflection fluorescence microscopy and refractive-index-matching method

    Science.gov (United States)

    Unno, Noriyuki; Nakata, Shuichiro; Satake, Shin-ichi; Taniguchi, Jun

    2016-07-01

    Multilayer nanoparticle image velocimetry (MnPIV) with a refractive-index-matching method is powerful technique for x- y- z (3D) flow measurement, because it can detect the 3D position of fluorescent particles with submicron resolution. In MnPIV, the intensity of fluorescence of a particle is used to estimate its z-position. However, it has been difficult to measure 3D flows around microstructures in water by total internal reflection fluorescence microscopy because of light scattering caused by the different refractive indices of the structures and the working fluid. By using a thermal nanoimprinting technique, we succeeded in fabricating microstructures from a polymer resin whose refractive index is equal to that of water, and we used these microstructures to perform MnPIV in water. As a result of the match between the refractive index of water and that of the microstructures, we were able to perform 3D tracking of nanoparticles around the microstructures in water.

  18. Portable ultrahigh-vacuum sample storage system for polarization-dependent total-reflection fluorescence x-ray absorption fine structure spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Yoshihide, E-mail: e0827@mosk.tytlabs.co.jp; Nishimura, Yusaku F.; Suzuki, Ryo; Beniya, Atsushi; Isomura, Noritake [Toyota Central R& D Labs., Inc., Yokomichi 41-1, Nagakute, Aichi 480-1192 (Japan); Uehara, Hiromitsu; Asakura, Kiyotaka; Takakusagi, Satoru [Catalysis Research Center, Hokkaido University, Kita 21-10, Sapporo, Hokkaido 001-0021 (Japan); Nimura, Tomoyuki [AVC Co., Ltd., Inada 1450-6, Hitachinaka, Ibaraki 312-0061 (Japan)

    2016-03-15

    A portable ultrahigh-vacuum sample storage system was designed and built to investigate the detailed geometric structures of mass-selected metal clusters on oxide substrates by polarization-dependent total-reflection fluorescence x-ray absorption fine structure spectroscopy (PTRF-XAFS). This ultrahigh-vacuum (UHV) sample storage system provides the handover of samples between two different sample manipulating systems. The sample storage system is adaptable for public transportation, facilitating experiments using air-sensitive samples in synchrotron radiation or other quantum beam facilities. The samples were transferred by the developed portable UHV transfer system via a public transportation at a distance over 400 km. The performance of the transfer system was demonstrated by a successful PTRF-XAFS study of Pt{sub 4} clusters deposited on a TiO{sub 2}(110) surface.

  19. Superluminal advanced transmission of X waves undergoing frustrated total internal reflection: the evanescent fields and the Goos-Hänchen effect.

    Science.gov (United States)

    Shaarawi, Amr M; Tawfik, Bassem H; Besieris, Ioannis M

    2002-10-01

    A study of X waves undergoing frustrated total internal reflection at a planar slab is provided. This is achieved by choosing the spectral plane wave components of the incident X wave to fall on the upper interface at angles greater than the critical angle. Thus, evanescent fields are generated in the slab and the peak of the field tunneling through the slab appears to be transmitted at a superluminal speed. Furthermore, it is shown that for deep barrier penetration, the peak of the transmitted field emerges from the rear interface of the slab before the incident peak reaches the front interface. To understand this advanced transmission of the peak of the pulse, a detailed study of the behavior of the evanescent fields in the barrier region is undertaken. The difference in tunneling behavior between deep and shallow barrier penetrations is shown to be influenced by the sense of the Goos-Hänchen shift.

  20. Separation and enrichment of palladium and gold in biological and environmental samples, adapted to the determination by total reflection X-ray fluorescence.

    Science.gov (United States)

    Messerschmidt, J; von Bohlen, A; Alt, F; Klockenkämper, R

    2000-03-01

    The reductive co-precipitation of trace and ultra-trace elements together with mercury followed by complete evaporation of the mercury makes it possible to determine palladium and gold by total reflection X-ray fluorescence. Both elements can be detected without interferences at optimal sensitivity in the pg range. Thus, detection limits of, e.g., 2.5 ng L-1 for palladium and 2.0 ng L-1 for gold, in urine, were obtained. The precision was determined to 0.04 at a palladium concentration of about 200 ng L-1 urine and to 0.19 at a gold concentration of only 18 ng L-1. The recovery for a urine sample spiked with known amounts of palladium and gold amounted to > 95%. Results of the combined procedure are given for the determination of palladium and gold in the urine of non-exposed and occupationally exposed persons and in some other environmentally relevant samples.

  1. Imaging exocytosis of single glucagon-like peptide-1 containing granules in a murine enteroendocrine cell line with total internal reflection fluorescent microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Ohara-Imaizumi, Mica; Aoyagi, Kyota [Department of Biochemistry, Kyorin University School of Medicine, 6-20-2 Shinkawa, Mitaka, Tokyo 181-8611 (Japan); Akimoto, Yoshihiro [Department of Anatomy, Kyorin University School of Medicine, 6-20-2 Shinkawa, Mitaka, Tokyo 181-8611 (Japan); Nakamichi, Yoko; Nishiwaki, Chiyono [Department of Biochemistry, Kyorin University School of Medicine, 6-20-2 Shinkawa, Mitaka, Tokyo 181-8611 (Japan); Kawakami, Hayato [Department of Anatomy, Kyorin University School of Medicine, 6-20-2 Shinkawa, Mitaka, Tokyo 181-8611 (Japan); Nagamatsu, Shinya, E-mail: shinya@ks.kyorin-u.ac.jp [Department of Biochemistry, Kyorin University School of Medicine, 6-20-2 Shinkawa, Mitaka, Tokyo 181-8611 (Japan)

    2009-12-04

    To analyze the exocytosis of glucagon-like peptide-1 (GLP-1) granules, we imaged the motion of GLP-1 granules labeled with enhanced yellow fluorescent protein (Venus) fused to human growth hormone (hGH-Venus) in an enteroendocrine cell line, STC-1 cells, by total internal reflection fluorescent (TIRF) microscopy. We found glucose stimulation caused biphasic GLP-1 granule exocytosis: during the first phase, fusion events occurred from two types of granules (previously docked granules and newcomers), and thereafter continuous fusion was observed mostly from newcomers during the second phase. Closely similar to the insulin granule fusion from pancreatic {beta} cells, the regulated biphasic exocytosis from two types of granules may be a common mechanism in glucose-evoked hormone release from endocrine cells.

  2. Application of the total reflection X-ray fluorescence method to the elemental analysis of brain tumors of different types and grades of malignancy

    Energy Technology Data Exchange (ETDEWEB)

    Lankosz, M.W., E-mail: Marek.Lankosz@fis.agh.edu.pl [Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, Krakow (Poland); Grzelak, M.; Ostachowicz, B.; Wandzilak, A.; Szczerbowska-Boruchowska, M.; Wrobel, P. [Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, Krakow (Poland); Radwanska, E.; Adamek, D. [Department of Neuropathology, Chair of Pathomorphology, Faculty of Medicine. Jagiellonian University, Krakow (Poland)

    2014-11-01

    The process of carcinogenesis may influence normal biochemical reactions leading to alterations in the elemental composition of the tissue. Total reflection X-ray fluorescence analysis (TXRF) was applied to the elemental analysis of different brain tumors. The following elements were present in all the neoplastic tissues analyzed: K, Ca, Fe, Cu, Zn and Rb. The results of the analysis showed that the elemental composition of a relatively small fragment of tissue represents satisfactorily the biochemical “signature” of a cancer. On the basis of the element concentrations determined, it was possible to differentiate between some types of brain tumors. - Highlights: • Elemental composition represents the biochemical signature of brain cancer. • The element levels differentiate some types of brain tumors. • TXRF spectrometry is a useful tool for elemental trace analysis of brain cancer.

  3. A novel form of Total Internal Reflection Fluorescence Microscopy (LG-TIRFM) reveals different and independent lipid raft domains in living cells.

    Science.gov (United States)

    Asanov, Alexander; Zepeda, Angélica; Vaca, Luis

    2010-02-01

    In the present study we have applied a novel form of Total Internal Reflection Fluorescence Microscopy (LG-TIRFM) in combination with fluorescently labeled cholera toxin to the study of lipid rafts dynamics in living cells. We demonstrate the usefulness of such approach by showing the dynamic formation/disaggregation of islands of cholera toxin on the surface of cells. Using multicolor LG-TIRFM with co-localization studies we show for the first time that two receptors previously identified as constituents of lipid rafts are found on different and independent "raft domains" on the cell plasma membrane. Furthermore, LG-TIRFM studies revealed limited association and dissociation of both domains overtime on different areas of the plasma membrane. The implications of different "raft domains" on cell physiology are discussed.

  4. Fast method for multielemental analysis of plants and discrimination according to the anatomical part by total reflection X-ray fluorescence spectrometry.

    Science.gov (United States)

    De la Calle, Inmaculada; Costas, Marta; Cabaleiro, Noelia; Lavilla, Isela; Bendicho, Carlos

    2013-05-01

    Fast and reliable analytical methodologies are required for quality control of plants in order to assure human health. Ultrasound-assisted extraction in combination with total reflection X-ray fluorescence is proposed as a fast and simple method for multielemental analysis of plants on a routine basis. For this purpose, five certified reference materials have been analysed for the determination of P, K, Ca, Cr, Mn, Fe, Ni, Cu, Zn and Pb. Different extractant media (acids and oxidants) were tried. A mixture of diluted HNO(3)+HCl+HF, was selected as the best option for the achievement of complete extractions. Accurate and precise results can be reached in most cases along with a high sample throughput. Different plants (i.e., herbs, spices and medicinal plants) were analysed. Linear discriminant analysis together with the elemental concentrations allowed the differentiation of commercial preparations corresponding to flower, fruit and leaf.

  5. Fermat's Principle in Curved Space-time, No Emission from Schwarzschild Black Holes as Total Internal Reflection and Black Hole Unruh effect

    CERN Document Server

    Mitra, Soma

    2015-01-01

    Using the Fermat's principle in curved space-time with stationary type metric, we have obtained the speed of light as a function of spatial coordinates and hence the corresponding refractive index. The whole region with space dependent gravity is divided into a number of overlapping transparent refracting media with varying refractive index. The refractive index is found to be increasing with the strength of gravitational field. Hence using the laws of refraction, we have explained the gravitational bending of light. Further using the conventional idea of total internal reflection of light while going from denser to rarer medium, in the present scenario it is the propagation of light from the region of ultra-strong gravitational field to relatively weaker gravitational field region, we have proposed an alternative approach for no emission of any kind of electromagnetic radiation from the surface of a classical Schwarzschild Black Hole. We have further noticed that for an observer in a uniformly accelerated fr...

  6. First combined total reflection X-ray fluorescence and grazing incidence X-ray absorption spectroscopy characterization of aeolian dust archived in Antarctica and Alpine deep ice cores

    Energy Technology Data Exchange (ETDEWEB)

    Cibin, G. [Diamond Light Source, Harwell Science and Innovation Campus, Didcot, Oxon OX110DE (United Kingdom); IMONT/EIM, Ente Italiano della Montagna, P.za dei Caprettari 70, 00176 Roma (Italy); Universita' degli Studi di Roma Tre, Dipartimento di Scienze Geologiche, L.go S. Leonardo Murialdo 1, 00146 Roma (Italy)], E-mail: giannantonio.cibin@diamond.ac.uk; Marcelli, A. [INFN - Laboratori Nazionali di Frascati, P.O. Box 13, 00044 Frascati (Roma) (Italy); Maggi, V. [Universita degli Studi di Milano-Bicocca, Dipartimento di Scienze dell' Ambiente e del Territorio, Piazza della Scienza 1, 20126 Milano (Italy); Sala, M. [Universita degli Studi di Milano-Bicocca, Dipartimento di Scienze dell' Ambiente e del Territorio, Piazza della Scienza 1, 20126 Milano (Italy); Universita degli Studi di Milano, Dipartimento di Scienze della Terra ' A. Desio' , Sez. Mineralogia, Via Mangiagalli 34, 20133 Milano (Italy); Marino, F.; Delmonte, B. [Universita degli Studi di Milano-Bicocca, Dipartimento di Scienze dell' Ambiente e del Territorio, Piazza della Scienza 1, 20126 Milano (Italy); Albani, S. [Universita degli Studi di Milano-Bicocca, Dipartimento di Scienze dell' Ambiente e del Territorio, Piazza della Scienza 1, 20126 Milano (Italy); Universita degli Studi di Siena, Dottorato in Scienze Polari, via Laterina 8, 53100 Siena (Italy); Pignotti, S. [IMONT/EIM, Ente Italiano della Montagna, P.za dei Caprettari 70, 00176 Roma (Italy)

    2008-12-15

    Aeolian mineral dust archived in polar and mid latitude ice cores represents a precious proxy for assessing environmental and climatic variations at different timescales. In this respect, the identification of dust mineralogy plays a key role. In this work we performed the first preliminary X-ray absorption spectroscopy (XAS) experiments on mineral dust particles extracted from Antarctic and from Alpine firn cores using grazing incidence geometry at the Fe K-edge. A dedicated high vacuum experimental chamber was set up for normal-incidence and total-reflection X-Ray Fluorescence and Absorption Spectroscopy analyses on minor amounts of mineral materials at the Stanford Synchrotron Radiation Laboratory. Results show that this experimental technique and protocol allows recognizing iron inclusion mineral fraction on insoluble dust in the 1-10 {mu}g range.

  7. Making use of x-ray optical effects in photoelectron-, Auger electron-, and x-ray emission spectroscopies: Total reflection, standing-wave excitation, and resonant effects

    Energy Technology Data Exchange (ETDEWEB)

    Yang, S.-H. [IBM Almaden Research Center, San Jose, California 95120 (United States); Gray, A. X. [Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94740 (United States); Department of Physics, University of California at Davis, Davis, California 95616 (United States); Stanford Institute for Materials and Energy Science, Stanford University and SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Kaiser, A. M. [Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94740 (United States); Department of Physics, University of California at Davis, Davis, California 95616 (United States); Peter Grunberg Institute, PGI-6, Forschungszentrum Juelich, 52425 Juelich (Germany); Mun, B. S. [Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Department of Applied Physics, Hanyang University, Ansan, Gyeonggi 426-791 (Korea, Republic of); Sell, B. C. [Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94740 (United States); Department of Physics, University of California at Davis, Davis, California 95616 (United States); Department of Physics, Otterbein College, Westerville, Ohio 43081 (United States); Kortright, J. B. [Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94740 (United States); Fadley, C. S. [Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94740 (United States); Department of Physics, University of California at Davis, Davis, California 95616 (United States)

    2013-02-21

    We present a general theoretical methodology and related open-access computer program for carrying out the calculation of photoelectron, Auger electron, and x-ray emission intensities in the presence of several x-ray optical effects, including total reflection at grazing incidence, excitation with standing-waves produced by reflection from synthetic multilayers and at core-level resonance conditions, and the use of variable polarization to produce magnetic circular dichroism. Calculations illustrating all of these effects are presented, including in some cases comparisons to experimental results. Sample types include both semi-infinite flat surfaces and arbitrary multilayer configurations, with interdiffusion/roughness at their interfaces. These x-ray optical effects can significantly alter observed photoelectron, Auger, and x-ray intensities, and in fact lead to several generally useful techniques for enhancing surface and buried-layer sensitivity, including layer-resolved densities of states and depth profiles of element-specific magnetization. The computer program used in this study should thus be useful for a broad range of studies in which x-ray optical effects are involved or are to be exploited in next-generation surface and interface studies of nanoscale systems.

  8. Biomonitoring of environmental pollution using growth tree rings of Tipuana tipu: Quantification by synchrotron radiation total reflection X-ray fluorescence

    Science.gov (United States)

    Geraldo, S. M.; Canteras, F. B.; Moreira, S.

    2014-02-01

    Currently, many studies use the bioindicators to qualitatively and/or quantitatively measure pollution. The analyses of tree growth rings represent one such bioindicator as changes in the environment are often recorded as impressions in the wood. The main objective of the present study is to examine the growth rings of Tipuana tipu - a member of the Leguminosae family that is native to Argentina and Bolivia and was introduced in Brazil as an ornamental plant - for potentially toxic elements. T. tipu is one of the most common trees in the urban landscape of Sao Paulo city and would provide an accurate reflection of environment changes. Tree ring samples previously dated using Synchrotron Radiation Total Reflection X-ray Fluorescence were collected from strategic locations in Sao Paulo. These locations include Piracicaba (SP) that has little access and small flow traffic and the campus of the University of São Paulo. Some trace elements present concentrations higher than considered as normal in some periods. In São Paulo city, samples collected from the campus of University of São Paulo (Butantã), showed the highest toxicity, with concentrations above the tolerable limit for the elements: Cr, Cu, and Pb. For the samples collected in Piracicaba city, one sample presented highest concentrations for the majority of the elements when compared to the other four samples collected at the same place, exceeding the toxicity limits for: Cr, Ni, Cu, and Pb.

  9. Total internal reflection without change of polarization using a right-angle prism with half-wavelength-thick optical interference coating.

    Science.gov (United States)

    Azzam, R M A

    2009-02-01

    Monochromatic light, which is polarized in an arbitrary state, is totally internally reflected at angle of incidence phi=45 degrees without change of polarization by a right-angle prism of refractive index n0=1+1/Square root of 2=1.70711 (e.g., N-LAK8 Schott glass at wavelength lambda=706 nm), which is coated with a transparent thin film of refractive index n1=(1+1/2)1/2=1.30656 (e.g., vacuum-deposited fluoride material) and of metric thickness equal to half of the vacuum wavelength of incident light, d=lambda/2. The ambient medium of evanescent refraction is assumed to be vacuum, air, or an inert gas. Wavelength shifts of +/-50 nm, or changes of the internal angle of incidence of +/-1 degrees around 45 degrees, cause phase errors of only a few degrees. The reflected and incident polarization states are nearly identical in the presence of such small phase errors.

  10. Room temperature trapping of stibine and bismuthine onto quartz substrates coated with nanostructured palladium for total reflection X-ray fluorescence analysis

    Energy Technology Data Exchange (ETDEWEB)

    Romero, Vanesa; Costas-Mora, Isabel; Lavilla, Isela; Bendicho, Carlos, E-mail: bendicho@uvigo.es

    2015-05-01

    In this work, a novel method for determining Sb and Bi based on the trapping of their covalent hydrides onto quartz reflectors coated with immobilized palladium nanoparticles (Pd NPs) followed by total reflection X-ray fluorescence (TXRF) analysis is proposed. Pd NPs were synthesized by chemical reduction of the metal precursor using a mixture of water:ethanol as mild reducing agent. Silanization using 3-mercaptopropyltrimethoxysilane (MPTMS) was performed for the immobilization of Pd NPs onto the quartz substrates. Volatile hydrides (stibine and bismuthine) generated by means of a continuous flow system were flushed onto the immobilized Pd NPs and retained by catalytic decomposition. As a result of the high catalytic activity of the nanostructured film, trapping can be performed at ambient temperature with good efficiency. Limits of detection (LODs) were 2.3 and 0.70 μg L{sup −1} for Sb and Bi, respectively. Enrichment factors of 534 and 192 were obtained for Sb and Bi, respectively. The new method was applied for the analysis of several matrices (milk, soil, sediment, cutaneous powder). Recoveries were in the range of 98.4–101% for both elements with a relative standard deviation of 2.5% (N = 5). - Highlights: • A novel method for trapping covalent hydrides of antimony and bismuth is proposed. • Emphasis is placed on the application of Pd nanoparticles as trapping surface. • The nanostructured surface provides high catalytic activity at ambient temperature. • Analysis by total reflection X-ray fluorescence is performed. • Determination of Bi and Sb in different matrices is carried out.

  11. Preliminary vitrinite and bitumen reflectance, total organic carbon, and pyrolysis data for samples from Upper and Lower Cretaceous strata, Maverick Basin, south Texas

    Science.gov (United States)

    Hackley, Paul C.; Dennen, Kristin O.; Gesserman, Rachel M.; Ridgley, Jennie L.

    2009-01-01

    The Lower Cretaceous Pearsall Formation, a regionally occurring limestone and shale interval of 500-600-ft maximum thickness (Rose, 1986), is being evaluated as part of an ongoing U.S. Geological Survey (USGS) assessment of undiscovered hydrocarbon resources in onshore Lower Cretaceous strata of the northern Gulf of Mexico. The purpose of this report is to release preliminary vitrinite and bitumen reflectance, total organic carbon, and pyrolysis data for Pearsall Formation, Glen Rose Formation, Hosston Formation, Austin Group, and Eagle Ford Group samples from the Maverick Basin in south Texas in order to aid in the characterization of these strata in this area. The preliminary nature of this report and the data contained herein reflect that the assessment and characterization of these samples is a work currently in progress. Pearsall Formation subdivisions are, in ascending stratigraphic order, the Pine Island Shale, James Limestone, and Bexar Shale Members (Loucks, 2002). The Lower Cretaceous Glen Rose Formation is also part of the USGS Lower Cretaceous assessment and produces oil in the Maverick Basin (Loucks and Kerans, 2003). The Hosston Formation was assessed by the USGS for undiscovered oil and gas resources in 2006 (Dyman and Condon, 2006), but not in south Texas. The Upper Cretaceous Austin Group is being assessed as part of the USGS assessment of undiscovered hydrocarbon resources in the Upper Cretaceous strata of the northern Gulf of Mexico and, along with the Upper Cretaceous Eagle Ford Group, is considered to be an important source rock in the Smackover-Austin-Eagleford Total Petroleum System (Condon and Dyman, 2006). Both the Austin Group and the Eagle Ford Group are present in the Maverick Basin in south Texas (Rose, 1986).

  12. Is there seismic attenuation in the mantle?

    Science.gov (United States)

    Ricard, Y.; Durand, S.; Montagner, J.-P.; Chambat, F.

    2014-02-01

    The small scale heterogeneity of the mantle is mostly due to the mixing of petrological heterogeneities by a smooth but chaotic convection and should consist in a laminated structure (marble cake) with a power spectrum S(k) varying as 1/k, where k is the wavenumber of the anomalies. This distribution of heterogeneities during convective stirring with negligible diffusion, called Batchelor regime is documented by fluid dynamic experiments and corresponds to what can be inferred from geochemistry and seismic tomography. This laminated structure imposes density, seismic velocity and potentially, anisotropic heterogeneities with similar 1/k spectra. A seismic wave of wavenumber k0 crossing such a medium is partly reflected by the heterogeneities and we show that the scattered energy is proportional to k0S(2k0). The reduction of energy for the propagating wave appears therefore equivalent to a quality factor 1/Q∝k0S(2k0). With the specific 1/k spectrum of the mantle, the resulting apparent attenuation should therefore be frequency independent. We show that the total contribution of 6-9% RMS density, velocity and anisotropy would explain the observed S and P attenuation of the mantle. Although these values are large, they are not unreasonable and we discuss how they depend on the range of frequencies over which the attenuation is explained. If such a level of heterogeneity were present, most of the attenuation of the Earth would be due to small scale scattering by laminations, not by intrinsic dissipation. Intrinsic dissipation must certainly exist but might correspond to a larger, yet unobserved Q. This provocative result would explain the very weak frequency dependence of the attenuation, and the fact that bulk attenuation seems negligible, two observations that have been difficult to explain for 50 years.

  13. Analysis in crab tissues and in sediment of estuary from Iguape (Sao Paulo, Brazil) by total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Salvador, Marcos J. [Universidade do Vale do Paraiba (UNIVAP), Sao Jose dos Campos, SP (Brazil)], E-mail: mjsalvador1531@yahoo.com.br; Sawazaki, David T.A.; Zucchi, Orgheda L.A. Domingues [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas], E-mail: david_tatsuo@hotmail.com, E-mail: olzucchi@fcfrp.usp.br; Vives, Ana Elisa S. de [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil). Faculdade de Engenharia Civil, Arquitetura e Urbanismo], E-mail: aesvives@unimep.br; Hattori, Gustavo Y. [Universidade Federal do Amazonas, Benjamin Constant (Brazil). Faculdade de Ciencias Agrarias], E-mail: hattori@ufam.edu.br

    2007-07-01

    We report the use of Synchrotron Radiation Total Reflection X-Ray Fluorescence analysis (SR-TXRF) as a technique for macro, micro and trace elements determination in the tissues of the crab Ulcides cordatus and in the sediments from the Iguape estuary (Sao Paulo, Brazil) for environmental pollution control and toxicological evaluation. The analyses were performed on the U. cordatus (muscles and hepatopancreas) and on sediments from 24 sites of the Iguape estuary (Sao Paulo, Brazil). Tissues and sediments samples were analyzed by SRTXRF after digestion in an open system, using Ga as internal standard. Potassium (K), Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Sr, and Ba were the elements detected in crab hepatopancreas at concentration ranging from 0.516 (Mn) to 2061 (K) mug/g. Muscles samples presented the elements K, Ca, Ti, V, Cr, Fe, Ni, Cu, Zn, Br and Sr at concentrations ranging from 0.043 (Ni) to 1917 (K) mug/g. Potassium (K), Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Rb, Sr, Sn, Ce, and Pb were the elements detected in the sediment samples with concentration between 3.8 (Cu) and 14628 (Fe)mug/g. (author)

  14. Quantitative assessment of hemodynamic and structural characteristics of in vivo brain tissue using total diffuse reflectance spectrum measured in a non-contact fashion.

    Science.gov (United States)

    Song, Yinchen; Garcia, Sarahy; Frometa, Yisel; Ramella-Roman, Jessica C; Soltani, Mohammad; Almadi, Mohamed; Riera, Jorge J; Lin, Wei-Chiang

    2017-01-01

    Here we present a new methodology that investigates the intrinsic structural and hemodynamic characteristics of in vivo brain tissue, in a non-contact fashion, and can be easily incorporated in an intra-operative environment. Within this methodology, relative total diffuse reflectance spectra (RTD(λ)) were acquired from targets using a hybrid spectroscopy imaging system. A spectral interpretation algorithm was subsequently applied to RTD(λ) to retrieve optical properties related to the compositional and structural characteristics of each target. Estimation errors of the proposed methodology were computationally evaluated using a Monte Carlo simulation model for photon migration under various conditions. It was discovered that this new methodology could handle moderate noise and achieve very high accuracy, but only if the refractive index of the target is known. The accuracy of the technique was also validated using a series of tissue phantom studies, and consistent and accurate estimates of μs'(λ)/μa(λ) were obtained from all the phantoms tested. Finally, a small-scale animal study was conducted to demonstrate the clinical utility of the reported method, wherein a forepaw stimulation model was utilized to induce transient hemodynamic responses in somatosensory cortices. With this approach, significant stimulation-related changes (p < 0.001) in cortical hemodynamic and structural characteristics were successfully measured.

  15. Chemical state analysis of trace-level alkali metals sorbed in micaceous oxide by total reflection X-ray photoelectron spectroscopy

    Science.gov (United States)

    Baba, Y.; Shimoyama, I.; Hirao, N.

    2016-10-01

    In order to determine the chemical states of radioactive cesium (137Cs or 134Cs) sorbed in clay minerals, chemical states of cesium as well as the other alkali metals (sodium and rubidium) sorbed in micaceous oxides have been investigated by X-ray photoelectron spectroscopy (XPS). Since the number of atoms in radioactive cesium is extremely small, we specially focused on chemical states of trace-level alkali metals. For this purpose, we have measured XPS under X-ray total reflection (TR) condition. For cesium, it was shown that ultra-trace amount of cesium down to about 100 pg cm-2 can be detected by TR-XPS. This amount corresponds to about 200 Bq of 137Cs (t1/2 = 30.2 y). It was demonstrated that ultra-trace amount of cesium corresponding to radioactive cesium level can be measured by TR-XPS. As to the chemical states, it was found that core-level binding energy in TR-XPS for trace-level cesium shifted to lower-energy side compared with that for thicker layer. A reverse tendency is observed in sodium. Based on charge transfer within a simple point-charge model, it is concluded that chemical bond between alkali metal and micaceous oxide for ultra-thin layer is more polarized that for thick layer.

  16. Quantitative assessment of hemodynamic and structural characteristics of in vivo brain tissue using total diffuse reflectance spectrum measured in a non-contact fashion

    Science.gov (United States)

    Song, Yinchen; Garcia, Sarahy; Frometa, Yisel; Ramella-Roman, Jessica C.; Soltani, Mohammad; Almadi, Mohamed; Riera, Jorge J.; Lin, Wei-Chiang

    2016-01-01

    Here we present a new methodology that investigates the intrinsic structural and hemodynamic characteristics of in vivo brain tissue, in a non-contact fashion, and can be easily incorporated in an intra-operative environment. Within this methodology, relative total diffuse reflectance spectra (RTD(λ)) were acquired from targets using a hybrid spectroscopy imaging system. A spectral interpretation algorithm was subsequently applied to RTD(λ) to retrieve optical properties related to the compositional and structural characteristics of each target. Estimation errors of the proposed methodology were computationally evaluated using a Monte Carlo simulation model for photon migration under various conditions. It was discovered that this new methodology could handle moderate noise and achieve very high accuracy, but only if the refractive index of the target is known. The accuracy of the technique was also validated using a series of tissue phantom studies, and consistent and accurate estimates of μs’(λ)/μa(λ) were obtained from all the phantoms tested. Finally, a small-scale animal study was conducted to demonstrate the clinical utility of the reported method, wherein a forepaw stimulation model was utilized to induce transient hemodynamic responses in somatosensory cortices. With this approach, significant stimulation-related changes (p < 0.001) in cortical hemodynamic and structural characteristics were successfully measured. PMID:28101403

  17. Room temperature trapping of stibine and bismuthine onto quartz substrates coated with nanostructured palladium for total reflection X-ray fluorescence analysis

    Science.gov (United States)

    Romero, Vanesa; Costas-Mora, Isabel; Lavilla, Isela; Bendicho, Carlos

    2015-05-01

    In this work, a novel method for determining Sb and Bi based on the trapping of their covalent hydrides onto quartz reflectors coated with immobilized palladium nanoparticles (Pd NPs) followed by total reflection X-ray fluorescence (TXRF) analysis is proposed. Pd NPs were synthesized by chemical reduction of the metal precursor using a mixture of water:ethanol as mild reducing agent. Silanization using 3-mercaptopropyltrimethoxysilane (MPTMS) was performed for the immobilization of Pd NPs onto the quartz substrates. Volatile hydrides (stibine and bismuthine) generated by means of a continuous flow system were flushed onto the immobilized Pd NPs and retained by catalytic decomposition. As a result of the high catalytic activity of the nanostructured film, trapping can be performed at ambient temperature with good efficiency. Limits of detection (LODs) were 2.3 and 0.70 μg L- 1 for Sb and Bi, respectively. Enrichment factors of 534 and 192 were obtained for Sb and Bi, respectively. The new method was applied for the analysis of several matrices (milk, soil, sediment, cutaneous powder). Recoveries were in the range of 98.4-101% for both elements with a relative standard deviation of 2.5% (N = 5).

  18. Study on trace elements behaviour in cancerous and healthy tissues of colon, breast and stomach: Total reflection X-ray fluorescence applications

    Science.gov (United States)

    Magalhães, T.; Carvalho, M. L.; Von Bohlen, A.; Becker, M.

    2010-06-01

    In this work Total-reflection X-ray fluorescence (TXRF) was used to analyse healthy and cancerous tissues of the same individual along several contiguous thin sections of each tissue. Thirty two samples (16 pairs) of breast tissue, 30 samples (15 pairs) of intestine tissue and 10 samples (5 pairs) of stomach tissue were analysed. The samples were obtained in Civil Hospitals of Germany (Dortmund) and Portugal (Lisbon). The elemental distribution of P, S, Cl, K, Ca, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br, Rb, Sr and Pb in these samples was studied. Descriptive statistics based on bar graphics and hypotheses tests and also an automatic classification based on hierarchical grouping analysis was used for the several analysed tissues. It was shown that the behaviour of the elements is tissue dependent. Some elements, like P and K exhibit the same behaviour in all the analysed tissue types. They have increased concentrations in all cancerous tissues. Unlike, other elements like Br show completely different behaviour depending on the tissue: similar concentration in healthy and cancerous stomach, decreased levels in colon cancerous tissues and enhanced concentrations in breast was observed. Moreover cancer tissues present decreased Se concentrations on colon and increased on breast.

  19. Elemental changes in hemolymph and urine of Rhodnius prolixus induced by in-vivo exposure to mercury: A study using synchrotron radiation total reflection X-ray fluorescence

    Science.gov (United States)

    Mantuano, Andrea; Pickler, Arissa; Barroso, Regina C.; de Almeida, André P.; Braz, Delson; Cardoso, Simone C.; Gonzalez, Marcelo S.; Figueiredo, Marcela B.; Garcia, Eloi S.; Azambuja, Patricia

    2012-05-01

    In recent years, the effects of pollution on the health of humans and other vertebrates were extensively studied. However, the effects on some invertebrates are comparatively unknown. Recent studies have demonstrated that toxic metals interfere with the reproduction, development and immune defenses of some terrestrial and marine invertebrates. Some environmental conditions including pollution produce chronic and acute effects on different animal's organs and systems. In this work, we investigated changes in the concentrations of Cl, K, Ca, Fe and Zn in Rhodnius prolixus as insect model. The elements were quantified using urine and hemolymph samples collected on different days after feeding the insects with blood containing HgCl2. The synchrotron radiation total reflection X-ray fluorescence measurements were carried at the X-ray fluorescence beamline facility in Brazilian Synchrotron Light Laboratory. The observation reveals that the calcium level was higher in the hemolymph than in urine. On the other hand, the urine collected from insects treated with HgCl2 showed higher level of Cl than hemolymph samples. Ca, Fe and Zn concentrations decrease drastically in urine samples collected after 2 days of HgCl2 treatment. The regulation of triatomines excretion was discussed pointing out the importance of trace elements.

  20. Determination of trace elements in planktonic microcrustaceans using total reflection X-ray fluorescence (TXRF): First results from two Chilean lakes

    Energy Technology Data Exchange (ETDEWEB)

    Woelfl, Stefan; Mercado, Susana; Villalobos, Lorena [Instituto de Zoologia, Universidad Austral de Chile, Casilla 567, Valdivia (Chile); Mages, Margarete; Ovari, Mihaly [Department of Inland Water Research Magdeburg, UFZ Centre for Environmental Research Leipzig-Halle, Brueckstrasse 3a, 39114, Magdeburg (Germany); Encina, Francisco [Escuela de Ciencias Ambientales, Facultad de Ciencias, Universidad Catolica de Temuco, Montt 056, Temuco (Chile)

    2004-02-01

    First results are described from the application of a recently developed dry method for determination of elements in single specimens of freshwater microcrustaceans, using total reflection X-ray fluorescence spectrometry (TXRF). This method is a powerful, non-destructive technique for quantifying the trace element content of minute biological samples with a dry weight of 3-50 {mu}g. Three different freshwater microcrustaceans were sampled, from the natural, uncontaminated Lake Laja and from the artificial Rapel reservoir which is slightly contaminated by drainage water from a copper mine. Single specimens of Daphnia pulex, Bosmina chilensis, and Ceriodaphnia dubia were prepared using a modification of the dry method and measured by TXRF. The results showed that both As, Mn, Fe, Ni, Zn, and Cu content and the bioaccumulation of these metals were usually significantly different between the microcrustaceans from the two lakes. The largest difference was found for Cu which was eight times more concentrated in the two microcrustaceans from Rapel reservoir than it was in D. pulex from Lake Laja. (orig.)

  1. Use of total reflection X-ray fluorescence to determine micro- and macroelements in the plasma of animals parasitized by Tripanossoma cruzi

    Energy Technology Data Exchange (ETDEWEB)

    Zucchi, Orgheda L.A. Domingues [Universidade de Sao Paulo, Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas. Dept. de Fisica e Quimica]. E-mail: Batista, Fernanda Ap. H.; Albuquerque, Sergio de [Universidade de Sao Paulo, Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas. Dept. de Analises Clinicas, Bromatologica e Toxicologica]. E-mail: fer_usp@yahoo.com.br; sdalbuque@fcfrp.usp.br; Nascimento Filho, Virgilio F. [Centro de Energia Nuclear na Agricultura CENA, Piracicaba, SP (Brazil). Lab. de Instrumentacao Nuclear]. E-mail: virgilio@cena.usp.br

    2007-07-01

    The mineral levels of S, Cl, K, Ca, Cr, Fe, Cu, and Zn in the plasma of mice (line BALB/c) infected with strains Bolivia and Y of Trypanosoma cruzi were determined by Total Reflection X-Ray Fluorescence technique (TXRF), with concentration raging from 0.2 (Cu) to 2650 (S) {mu}g/g. Three experimental groups were used: a control group, a group of infected females, and a group of infected males. The plasma of the animals was obtained before, during, and after the parasitemic peak for each of the three groups and for each strain used. Sample excitation was performed using an X-ray tube with a Mo target and Zr filter, operating at 40 kV and 30 mA, at an incidence angle of 6.4 min. In general, the elements evaluated showed small variations between the different groups, without statistical difference. Significant alterations were observed in the Bolivia strain, demonstrating that a relation between this strain and changes in the levels determined for the elements might exist. (author)

  2. A simple method for the multi-elemental analysis of organic fertilizer by slurry sampling and total reflection X-ray fluorescence.

    Science.gov (United States)

    Resende, Luciene V; Nascentes, Clésia C

    2016-01-15

    A simple and fast method for the multi-elemental determination of 18 inorganic constituents (P, S, Cl, K, Ca, Ti, Cr, V, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, Ba and Pb) in organic fertilizers employing slurry sampling and total reflection X-ray fluorescence (TXRF) is presented. A 2(3) factorial design with a central point was employed to optimize the slurry sampling procedure. The internal standard and instrumental conditions were optimized by univariate studies. The selectivity of the method to determining Se, As, Pb, Cr, Ni and Cd was assessed. The accuracy was evaluated by the analysis of four standard reference materials (SRM). The recoveries varied from 72% to 114%. For most of the elements, good agreement was achieved between the certified value and the value measured in the SRM. The relative standard deviation (RSD %) ranged from 0.5% to 14%. The evaluated method was applied to the determination of analytes in the press cake of palm, castor, curcas, sunflower, fodder turnip, white lupin, rapeseed and pequi, and their potential to be used as organic fertilizer was evaluated in accordance with Brazilian legislation.

  3. Adsorption of Dimethyldodecylamine Oxide and Its Mixtures with Triton X-100 at the Hydrophilic Silica/Water Interface Studied Using Total Internal Reflection Raman Spectroscopy.

    Science.gov (United States)

    Ngo, Dien; Baldelli, Steven

    2016-12-08

    Adsorption of dimethyldodecylamine oxide (DDAO) and its mixtures with Triton X-100 (TX-100) at the hydrophilic silica/water interface has been studied using total internal reflection (TIR) Raman spectroscopy and target factor analysis (TFA). The use of a linear vibrational spectroscopic technique helps obtain information on molecular behavior, adsorbed amount, and conformational order of surfactant molecules at the interface. The results obtained from polarized Raman measurements of pure DDAO show insignificant changes in the orientation and conformational order of surface molecules as a function of DDAO bulk concentrations. The adsorption isotherm of pure DDAO shows a change in the structure of the adsorbed layer at concentrations close to the critical micelle concentration (cmc). TFA reveals that, for a low concentration of DDAO (0.30 mM in this study), adsorption of both DDAO and TX-100 in the mixed surfactants was enhanced at low TX-100 concentrations. The synergistic effect is dominant at low concentrations of TX-100, with enhanced adsorption of both surfactants. Although competitive adsorption is effective at high concentrations of TX-100, the presence of a small amount of DDAO at the interface still enhances TX-100 adsorption. When DDAO concentrations are increased to 1.00 mM, TX-100 replaces DDAO molecules on the surface when TX-100 concentration is increased.

  4. Iron speciation in human cancer cells by K-edge total reflection X-ray fluorescence-X-ray absorption near edge structure analysis

    Energy Technology Data Exchange (ETDEWEB)

    Polgari, Zs. [Eoetvoes Lorand University, Institute of Chemistry, Department of Analytical Chemistry, Laboratory of Environmental Chemistry and Bioanalytics, P.O. Box 32, H-1518, Budapest (Hungary); Meirer, F. [Institute of Atomic and Subatomic Physics, Vienna University of Technology, Vienna (Austria); MiNALab, CMM-irst, Fondazione Bruno Kessler, Povo, Trento (Italy); Sasamori, S.; Ingerle, D. [Institute of Atomic and Subatomic Physics, Vienna University of Technology, Vienna (Austria); Pepponi, G. [MiNALab, CMM-irst, Fondazione Bruno Kessler, Povo, Trento (Italy); Streli, C. [Institute of Atomic and Subatomic Physics, Vienna University of Technology, Vienna (Austria); Rickers, K. [Hamburger Synchrotronstrahlungslabor at DESY, Hamburg (Germany); Reti, A.; Budai, B. [Department of Clinical Research, National Institute of Oncology, Budapest (Hungary); Szoboszlai, N. [Eoetvoes Lorand University, Institute of Chemistry, Department of Analytical Chemistry, Laboratory of Environmental Chemistry and Bioanalytics, P.O. Box 32, H-1518, Budapest (Hungary); Zaray, G., E-mail: zaray@ludens.elte.hu [Eoetvoes Lorand University, Institute of Chemistry, Department of Analytical Chemistry, Laboratory of Environmental Chemistry and Bioanalytics, P.O. Box 32, H-1518, Budapest (Hungary)

    2011-03-15

    X-ray absorption near edge structure (XANES) analysis in combination with synchrotron radiation induced total reflection X-ray fluorescence (SR-TXRF) acquisition was used to determine the oxidation state of Fe in human cancer cells and simultaneously their elemental composition by applying a simple sample preparation procedure consisting of pipetting the cell suspension onto the quartz reflectors. XANES spectra of several inorganic and organic iron compounds were recorded and compared to that of different cell lines. The XANES spectra of cells, independently from the phase of cell growth and cell type were very similar to that of ferritin, the main Fe store within the cell. The spectra obtained after CoCl{sub 2} or NiCl{sub 2} treatment, which could mimic a hypoxic state of cells, did not differ noticeably from that of the ferritin standard. After 5-fluorouracil administration, which could also induce an oxidative-stress in cells, the absorption edge position was shifted toward higher energies representing a higher oxidation state of Fe. Intense treatment with antimycin A, which inhibits electron transfer in the respiratory chain, resulted in minor changes in the spectrum, resembling rather the N-donor Fe-{alpha},{alpha}'-dipyridyl complex at the oxidation energy of Fe(III), than ferritin. The incorporation of Co and Ni in the cells was followed by SR-TXRF measurements.

  5. Analysis of some chosen elements of cerebrospinal fluid and serum in amyotrophic lateral sclerosis patients by total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Ostachowicz, B. [Department of Radiometric Analyses, Faculty of Physic and Applied Computer Science, AGH, University of Science and Technology, Cracow (Poland); Lankosz, M. [Department of Radiometric Analyses, Faculty of Physic and Applied Computer Science, AGH, University of Science and Technology, Cracow (Poland); Tomik, B. [Institute of Neurology, Collegium Medicum, Jagiellonian University, Cracow (Poland); Adamek, D. [Institute of Neurology, Collegium Medicum, Jagiellonian University, Cracow (Poland); Wobrauschek, P. [Atominstitut, Vienna University of Technology, Vienna (Austria); Streli, C. [Atominstitut, Vienna University of Technology, Vienna (Austria)]. E-mail: streli@ati.ac.at; Kregsamer, P. [Atominstitut, Vienna University of Technology, Vienna (Austria)

    2006-11-15

    Trace elements play an important role in the human central nervous system. Significant variations of the concentration of trace elements in body fluids may occur in neurodegenerative diseases. In the present work an investigation of the elemental composition of the serum, and the cerebrospinal fluid in amyotrophic lateral sclerosis patients and a control group was performed. For the analysis of the body fluids Total reflection X-ray Fluorescence (TXRF) spectrometry was used. The samples were taken during routine diagnostic procedures. Na, Mg, Cl, K, Ca, Cu, Zn, and Br were determined in both fluids. In order to validate the results of analysis a serum standard reference material was measured. A t-test was applied to check if the mean concentrations of the elements are different for ALS and the control group. For the serum samples higher values for Br were found in the ALS group, for the cerebrospinal fluid lower values of Na, Mg and Zn as well as higher Ca values were found in the ALS group compared to the control group.

  6. Elemental concentration analysis in brain of young, adult and old wistar rats by X-ray total reflection fluorescence with synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Serpa, Renata F.B.; Jesus, Edgar F.O. de; Lopes, Ricardo T. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Lab. de Instrumentacao Nuclear]. E-mail: renata@lin.ufrj.br; Anjos, Marcelino J. dos [Universidade do Estado, Rio de Janeiro, RJ (Brazil). Inst. de Fisica]. E-mail: marcelin@lin.ufrj.br; Carmo, Maria da Graca T. do [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Nutricao]. E-mail: tcarmo@editema.com.br; Rocha, Monica S. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Dept. de Farmacologia]. E-mail: mrocha@farmaco.ufrj.br; Moreira, Silvana [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Civil]. E-mail: silvana@fec.unicamp.br; Martinez, Ana Maria B. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Dept. de Histologia]. E-mail: martinez@histo.ufrj.br

    2005-07-01

    The mainly goal of this work is to compare the elemental concentrations with different postnatal ages (2, 8, 20, 48 and 72 weeks) at three different regions of the rat brain, namely temporal cortex, entorhinal cortex and hippocampus by X-Ray Total Reflection Fluorescence with Synchrotron Radiation (SR-TXRF). The advantages for this analytical multielemental technique are: low background, linear relation in the quantification analysis and low detection limit (ngg{sup -1}). The fluorescence measurements were carried out at XRF beamline at the Brazilian Light Synchrotron Laboratory (Campinas, Brazil). It was possible to determine the following elements: Ti, Mn, Fe, Cu, Zn, Br, Rb and Sr (at trace level) and P, S, Cl, K and Ca (at major levels) were determined in the brain. In general, Fe levels were more pronounced in entorhinal cortex. There was also observed that the hippocampus of the old female rat presented the highest concentrations for Al, P, S, K, and Zn. In contrast to this, the hippocampus and entorhinal cortex presented the less levels for Al and K in the young animals. On the other hand, Cl levels were more conspicuous in the entorhinal cortex of the oldest male animal studied. (author)

  7. Study of interaction of iron and lead during their uptake process in wheat roots by total-reflection X-ray fluorescence spectrometry

    Science.gov (United States)

    Varga, Anita; Záray, Gyula; Fodor, Ferenc; Cseh, Edit

    1997-07-01

    Microwave assisted acidic digestion and total-reflection X-ray fluorescence spectrometry (TXRF) was used for the determination of lead and iron in wheat roots cultured in CaSO 4 solution, and treated with Pb(NO 3) 2 and Fe(III)-citrate or Fe(III)-EDTA under controlled conditions, respectively. It was established that lead has a stimulation effect on the iron uptake in the presence of Fe(III)-citrate. The lead uptake, however, is hardly influenced by iron independently from the complex forming agents applied. To check the stability of the accumulated iron and lead constituents, some of the roots were washed with various solutions and the removable iron and lead were also measured by TXRF. These experiments indicate that the presence of lead results in higher stability of iron constituents in the root; however, iron does not have any effect on the lead constituents, the stabilities of which increase in the order Pb-citrate

  8. Characterization by Total Reflection X-ray Fluorescence Spectrometry of filtered water into the cave under the Sun Pyramid in Teotihuacan City

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, T. [National University of Mexico, Faculty of Chemistry, Building D, CU, O4510, Mexico, D.F. (Mexico)], E-mail: tmc@servidor.unam.mx; Zarazua, G.; Avila-Perez, P. [National Institute of Nuclear Research, Carr. Mexico-Toluca Km 36.5, 52045, Salazar, Ocoyoacac, Edo. de Mexico (Mexico); Juarez, F. [National University of Mexico, Institute of Geophysics, Circuito Institutos, CU, 04510 Mexico, D.F. (Mexico); Cabrera, L. [National University of Mexico, Faculty of Chemistry, Building D, CU, O4510, Mexico, D.F. (Mexico); Martinez, G. [Coordinacion Nacional de Conservacion del Patrimonio Cultural, Xicotencatl y General Anaya s/n., 04120, Mexico, D.F. (Mexico)

    2008-12-15

    Teotihuacan (50 km north-east Mexico City) was the most important ancient city in Mesoamerica and it flourished 200-750 AC. It is situated in the central part of the Valley of Teotihuacan, in Central Mexico. This study was carried out in the 102 m-long cave under the largest single construction, the massive Sun Pyramid, being located on the east side of the 'Avenue of the Dead', in the northern half-part of the city. The study shows the results of Total Reflection X-ray Fluorescence Spectrometry analysis and other techniques of a water sample obtained from the inside of the cave. The inside temperature ranged between 19 and 22 deg. C; relative humidity was between 98 and 99.3%; water-dropping velocity (water de-sorption capability) was 13.5 {mu}L min{sup -1}. Water samples from wells around the site were analyzed too. Metal concentration in all of the water samples matches the characteristics of the sampling site, well's depth, soil and minerals.

  9. Total reflection X-ray fluorescence measurements of S and P in proteins using a vacuum chamber specially designed for low Z elements

    Energy Technology Data Exchange (ETDEWEB)

    Rauwolf, M., E-mail: mrauwolf@ati.ac.at [Atominstitut, Technische Universität Wien, Stadionallee 2, Vienna 1020 (Austria); Vanhoof, C.; Tirez, K.; Maes, E. [Flemish Institute for Technological Research NV, Boeretang 200, Mol 2400 (Belgium); Ingerle, D.; Wobrauschek, P.; Streli, C. [Atominstitut, Technische Universität Wien, Stadionallee 2, Vienna 1020 (Austria)

    2014-11-01

    As the ratio of phosphorus and sulfur in proteins allows the determination of the phosphorylation degree in proteins, the absolute determination of phosphorus and sulfur in organic samples is of growing interest. While it takes some effort to quantify phosphorus and sulfur with inductively coupled quadrupole plasma mass spectrometry (ICP-QMS), total reflection X-ray fluorescence analysis (TXRF) allows easy quantification. In the presented work, the low Z TXRF spectrometer at the Atominstitut was used to analyze phosphorus and sulfur in proteins. Although the preparation of the protein samples proved to be more difficult than originally expected, it could be shown that TXRF is well suited for the determination of P and S in proteins. The obtained lower limits of detection (LLD) for P and S in proteins were extrapolated for 1000s and were 34 pg and 19 pg, respectively. The importance of height scans for each sample to exclude heterogeneities was demonstrated. - Highlights: • Low Z TXRF spectrometry was used to analyze phosphorus and sulfur in proteins. • TXRF is well suited for the determination of P and S in proteins. • Good detection limits for P (34 pg) and S (19 pg) were achieved. • Due to the detection limits, we propose that TXRF is a suitable method to analyze protein fractions.

  10. Quantification of potentially toxic elements in sewage and sludge from treatment plants in the cities of Campinas and Jaguariuna using synchrotron radiation total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Luciana Carla Ferreira de; Canteras, Felippe Benavente; Moreira, Silvana, E-mail: silvana@fec.unicamp.br, E-mail: felippe.canteras@gmail.com, E-mail: lucarla24@gmail.com [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Inst. Politecnico. Dept. de Saneamento e Ambiente

    2013-07-01

    The rapid urban and industrial development in last decades has brought as one of the consequences, changes in the environment. The lack of planning of city growth is, today, one of the major causes of water pollution including residential, industrial, agricultural, and hospital waste. The metals contamination is a major problem, causing serious changes to the environment, causing harm to human health. The sludge generated at sewage treatment plants, is an important source of nutrients and organic matter, and therefore it can also be reused mainly for agricultural use, since contaminants are removed. The cities of Campinas and Jaguariuna are inserted in the Campinas Metropolitan Region (CMR), one of the most dynamic regions in the Brazilian economy. Therefore, to study the anthropogenic influences of the cities, evaluated the quality of raw and treated effluent and the sludge generated in sewage treatment plants, especially with regard to heavy metals. Measurements of metals were performed by Synchrotron Radiation Total Reflection X-ray Fluorescence. For treated effluent data were compared to CONAMA 357 law and Cr, Mn, Fe, Ni, Cu, Zn, Ba and Pb showed concentrations in according with the law. To reuse in agriculture the contents were compared to the limits defined by CETESB and some elements had concentrations above to the permitted preventing its reuse. For sludge, Cr, Ni, Cu, Zn, Ba and Pb, in the two treatment plants studied, the concentrations were lower than the maximum permissible values established by CONAMA 375 law allowing the sludge application sludge on agricultural land. (author)

  11. Evaluation of Fe and Zn/Cu ratio in serum of patients with sickle cell anemia by total reflection X-ray fluorescence using synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Canellas, Catarine G.L.; Leitao, Roberta G.; Lopes, Ricardo T., E-mail: catarine@lin.ufrj.b, E-mail: ricardo@lin.ufrj.b [Universidade Federal do Rio de Janeiro (PEN/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Engenharia Nuclear. Lab. de Instrumentaco Nuclear; Carvalho, Silvia M.F., E-mail: silvia@hemorio.rj.gov.b [State Institute of Hematology Arthur de Siqueira Cavalcanti (HEMORIO), Rio de Janeiro, RJ (Brazil); Bellido, Alfredo Victor B., E-mail: alfredo@ien.gov.b [Federal Fluminense University (UFF), Niteroi, RJ (Brazil). Chemistry Inst.; Anjos, Marcelino J., E-mail: marcelin@lin.ufrj.b [State University of Rio de Janeiro (UERJ), RJ (Brazil). Physics Inst.

    2011-07-01

    Sickle cell anemia (SCA) is a blood disorder that affects hemoglobin, the protein found in red blood cells that help carry oxygen throughout the body. In this work we have analyzed serum samples from patients with SCA by using total reflection X-ray fluorescence using synchrotron radiation (SRTXRF). The SRTXRF measurements were performed at the X-ray fluorescence beamline at Brazilian National Synchrotron Light Laboratory (LNLS), in Campinas, Sao Paulo using a polychromatic beam. We have studied forty-three patients aged 18-50 years old, suffering from SCA and Sixty healthy volunteers aged 18-60 years old. It was possible to determine the concentrations of the following elements: P, S, Cl, K, Ca, Fe, Cu, Zn, Br and Rb. Student's t-test was applied in order to check whether the two populations (CG x SCA) had the same mean values. It was observed that elemental concentration of P, Cl, K, Fe, Cu, Zn and Br differed significantly ({alpha} = 0.05) between groups of healthy subjects and SCA. The concentrations of K, Fe and Cu in the serum samples of patients with SCA were larger 15%, 120 % and 20 %, respectively, when compared with the CG. On the other hand, the concentrations of P (-20 %), Cl (-6 %), Zn (-25 %) and Br (-22 %) were smaller than the values determined for the control group. The serum level Cu/Zn ratio was significantly higher (60%) in the serum samples of patients with SCA group than the CG. So, the Cu/Zn ratio can be used as an adjuvant index in enhancement for diagnosis of SCA. There are evidences of an association among Fe, Cu, Zn and Cu/Zn in the SCA pathogenesis process. (author)

  12. Elemental changes in hemolymph and urine of Rhodnius prolixus induced by in-vivo exposure to mercury: A study using synchrotron radiation total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Mantuano, Andrea, E-mail: mantuanoandrea@gmail.com [Physics Institute, State University of Rio de Janeiro (Brazil); Pickler, Arissa; Barroso, Regina C. [Physics Institute, State University of Rio de Janeiro (Brazil); Almeida, Andre P. de; Braz, Delson [Nuclear Engineering Program, Federal University of Rio de Janeiro (Brazil); Cardoso, Simone C. [Physics Institute, Federal University of Rio de Janeiro (Brazil); Gonzalez, Marcelo S. [Department of General Biology, Fluminense Federal University (Brazil); Figueiredo, Marcela B.; Garcia, Eloi S.; Azambuja, Patricia [Laboratory of Biochemistry and Physiology of Insects, Oswaldo Cruz Foundation (Brazil)

    2012-05-15

    In recent years, the effects of pollution on the health of humans and other vertebrates were extensively studied. However, the effects on some invertebrates are comparatively unknown. Recent studies have demonstrated that toxic metals interfere with the reproduction, development and immune defenses of some terrestrial and marine invertebrates. Some environmental conditions including pollution produce chronic and acute effects on different animal's organs and systems. In this work, we investigated changes in the concentrations of Cl, K, Ca, Fe and Zn in Rhodnius prolixus as insect model. The elements were quantified using urine and hemolymph samples collected on different days after feeding the insects with blood containing HgCl{sub 2}. The synchrotron radiation total reflection X-ray fluorescence measurements were carried at the X-ray fluorescence beamline facility in Brazilian Synchrotron Light Laboratory. The observation reveals that the calcium level was higher in the hemolymph than in urine. On the other hand, the urine collected from insects treated with HgCl{sub 2} showed higher level of Cl than hemolymph samples. Ca, Fe and Zn concentrations decrease drastically in urine samples collected after 2 days of HgCl{sub 2} treatment. The regulation of triatomines excretion was discussed pointing out the importance of trace elements. - Highlights: Black-Right-Pointing-Pointer Changes in Cl, K, Ca, Fe and Zn contents in Rhodnius prolixus were evaluated. Black-Right-Pointing-Pointer In triatomines these elements have not been previously described. Black-Right-Pointing-Pointer Cl, Ca, Zn levels were lower than control in hemolymph after 5 days of HgCl{sub 2} fed. Black-Right-Pointing-Pointer Cl, Ca, Zn levels were higher than control in urine after 2 days of HgCl{sub 2} fed.

  13. Evaluation of growth tree rings of Tipuana Tipu as biomonitoring of environmental pollution by synchrotron radiation total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Silvana; Geraldo, Simoni Michetti; Canteras, Felippe Benavente, E-mail: silvana@fec.unicamp.br, E-mail: felippe.canteras@gmail.com [Universidade Estadual de Campinas (FEC/UNICAMP), Campinas, SP (Brazil). Dept. de Saneamento e Ambiente

    2013-07-01

    The bioindicators, plants or animals capable to present qualitative and/or quantitative answers, when exposed to pollutant substances. Trees record and incorporate in their log, developed year after year, the impressions of the environment, becoming possible the study of the different environmental changes, including contamination, that have occurred over the life of these trees. The selected species, Tipuana Tipu, of the Leguminosae family, is native of Argentina and Bolivia and was introduced in Brazil as an ornamental plant. It is one of the most common trees in the urban landscaping in Sao Paulo city. The present project has as main objective the determination of the content of potentially toxic elements in samples of growth the tree rings of Tipuana Tipu, previously dated, collected in strategically locations of Sao Paulo, using Synchrotron Radiation Total Reflection X-Ray Fluorescence. Samples were also collected in the Piracicaba (SP), local of little access and small flow traffic. The SR-TXRF analysis was carried out in the X-ray Fluorescence Beamline at the Brazilian Synchrotron Light Source Laboratory, located in Campinas city, Sao Paulo State, Brazil. Some trace elements present concentrations higher than considered as normal in some periods. In this paper the highest value for Pb was 123.54 μg.g{sup -1} considered as threshold value was observed for the period 1998 to 2000 for University of Sao Paulo, Butanta site. For the same period excessive level was also observed for samples collected in Piracicaba city. In Sao Paulo city, sample collected in the campus of University of Sao Paulo (Butanta), showed the highest toxicity, with concentration above the tolerable limit for Ti, Cr and Cu. For the samples collected in Piracicaba city the concentrations of Cr, Ni, Cu, and Pb exceeding the toxicity limits. (author)

  14. Precision Model for Microwave Rotary Vane Attenuator

    DEFF Research Database (Denmark)

    Guldbrandsen, Tom

    1979-01-01

    A model for a rotary vane attenuator is developed to describe the attenuator reflection and transmission coefficients in detail. All the parameters of the model can be measured in situ, i.e., without diassembling any part. The tranmission errors caused by internal reflections are calculated from ...... measurements of the much larger reflection parameters, hence commonly used nonprecision instruments can be used to determine the transmission errors with sufficient accuracy for the highest precision obtainable in standard laboratories....

  15. Sizes of mantle heteogeneities and seismic attenuation

    Science.gov (United States)

    Ricard, Y. R.; durand, S.; Chambat, F.; Montagner, J.

    2013-12-01

    The small scale heterogeneity of the mantle, being mostly due to the mixing of petrological heterogeneities by a smooth but chaotic convection should consist in a laminated structure (marble cake) with a power spectrum S(k) varying as 1/k, where k is the wavenumber of the anomalies. This distribution of heterogeneities during convective stirring with negligible diffusion, called Batchelor regime is documented by fluid dynamic experiments and corresponds to what can be inferred from geochemistry and seismic tomography. This laminated structure imposes density, seismic velocity and potentially, anisotropic heterogeneities with similar 1/k spectrums. We show that a seismic wave of wavenumber k_0 crossing such medium is partly reflected by the heterogeneities and the scattered energy has an energy found proportional to k_0 S(2k_0). The reduction of energy for the propagating wave appears therefore equivalent to a quality factor 1/Q proportional to k_0 S(2k_0). With the specific 1/k spectrum of the mantle, the resulting apparent attenuation should therefore be frequency independent. We show that the total contribution of 6-9% RMS density, velocity and anisotropy would explain the observed S and P attenuation of the mantle. Although these values are large there are not unreasonable and we discuss how they are likely overestimated. In this case, most of the attenuation of the Earth would be due to small scale scattering by laminations not by intrinsic dissipation. Intrinsic dissipation must certainly exists but might correspond to a larger, yet unobserved Q. This provocative result would explain the observed very weak frequency dependence of the attenuation, and the fact that bulk attenuation seems negligeable, two observations that have been difficult to explain for 50 years.

  16. Single molecule investigations of DNA looping using the tethered particle method and translocation by acto-myosin using polarized total internal reflection fluorescence microscopy

    Science.gov (United States)

    Beausang, John F.

    Single molecule biophysics aims to understand biological processes by studying them at the single molecule level in real time. The proteins and nucleic acids under investigation typically exist in an aqueous environment within ˜ ten degrees of room temperature. These seemingly benign conditions are actually quite chaotic at the nanoscale, where single bio-molecules perform their function. As a result, sensitive experiments and statistical analyses are required to separate the weak single molecule signal from its background. Protein-DNA interactions were investigated by monitoring DNA looping events in tethered particle experiments. A new analysis technique, called the Diffusive hidden Markov method, was developed to extract kinetic rate constants from experimental data without any filtering of the raw data; a common step that improves the signal to noise ratio, but at the expense of lower time resolution. In the second system, translocation of the molecular motor myosin along its actin filament track was studied using polarized total internal reflection (polTIRF) microscopy, a technique that determines the orientation and wobble of a single fluorophore attached to the bio-molecule of interest. The range of resolvable angles was increased 4-fold to include a hemisphere of possible orientations. As a result, the handedness of actin filament twirling as it translocated along a myosin-coated surface was determined to be left-handed. The maximum time resolution of a polTIRF setup was increased 50-fold, in part by recording the arrival times and polarization state of single photons using a modified time-correlated single photon counting device. A new analysis, the Multiple Intensity Change Point algorithm, was developed to detect changes in molecular orientation and wobble using the raw time-stamped data with no user-defined bins or thresholds. The analysis objectively identified changes in the orientation of a bifunctional-rhodamine labeled calmodulin that was attached

  17. Ultrasound transmission attenuation tomography using energy-scaled amplitude ratios

    Science.gov (United States)

    Chen, Ting; Shin, Junseob; Huang, Lianjie

    2016-04-01

    Ultrasound attenuation of breast tumors is related to their types and pathological states, and can be used to detect and characterize breast cancer. Particularly, ultrasound scattering attenuation can infer the margin properties of breast tumors. Ultrasound attenuation tomography quantitatively reconstructs the attenuation properties of the breast. Our synthetic-aperture breast ultrasound tomography system with two parallel transducer arrays records both ultrasound reflection and transmission signals. We develop an ultrasound attenuation tomography method using ultrasound energy-scaled amplitude decays of ultrasound transmission signals and conduct ultrasound attenuation tomography using a known sound-speed model. We apply our ultrasound transmission attenuation tomography method to a breast phantom dataset, and compare the ultrasound attenuation tomography results with conventional beamforming ultrasound images obtained using reflection signals. We show that ultrasound transmission attenuation tomography complements beamforming images in identifying breast lesions.

  18. Do leaf total antioxidant capacities (TAC) reflect specific antioxidant potentials? - A comparison of TAC and reactive oxygen scavenging in tobacco leaf extracts.

    Science.gov (United States)

    Majer, Petra; Stoyanova, Silviya; Hideg, Eva

    2010-07-02

    Two traditional methods of total antioxidant capacity (TAC) assessment, Trolox equivalent antioxidant capacity (TEAC) and ferric reducing antioxidant power (FRAP) were applied to water extracts from tobacco leaves at various stages of senescence. Physiological status of the leaves was characterized by the effective photochemical quantum yield of photosynthesis (Y(II)). TAC values were compared to amounts of total phenolics, carotenoid contents and also to reactive oxygen scavenging capacities of the leaf extracts. To this end a new, simple fluorimetric assay was introduced for testing hydroxyl radical neutralizing capacity in leaf extracts. We found that while both TAC values increased with declining photosynthesis and decreasing pigment content, they were not characteristic to specific superoxide or hydroxyl radical scavenging and had limited connection to leaf antioxidant content. Good linear correlations were only found between the following pairs of parameters: Y(II) - total carotenoid, TEAC - total carotenoid, FRAP - total phenolics. Our data show that TEAC and FRAP are not interchangeable in leaf studies and do not represent antioxidant action on ROS.

  19. IGF-I bioactivity might reflect different aspects of quality of life than total IGF-I in gh-deficient patients during GH treatment

    NARCIS (Netherlands)

    A.J. Varewijck (Aimee); S.W.J. Lamberts (Steven); S.J.C.M.M. Neggers (Bas); L.J. Hofland (Leo); J.A.M.J.L. Janssen (Joseph)

    2013-01-01

    textabstractContext: No relationship has been found between improvement in quality of life (QOL) and total IGF-I during GH therapy. Aim: Our aim was to investigate the relationship between IGF-I bioactivity and QOL in GH-deficient (GHD) patients receiving GH for 12 months. Methods: Of 106 GHD patien

  20. Determination of Fe(II) and Fe(III) in small samples by microbore ion chromatography and photometric, atomic absorption spectrometry and total-reflection X-ray fluorescence detection

    Science.gov (United States)

    Sinner, T.; Hoffmann, P.; Ortner, H. M.

    1993-02-01

    Iron(II) and iron(III) are determined after separation on an ion Chromatographie column by various detection systems. "On-line" detection was achieved by the use of a photometer with a flow cell of 0.8 μl; for "off-line" detection, graphite furnace atomic absorption spectrometry or total-reflection X-ray fluorescence were used. The applicability of the methods is shown for standard solutions and atmospheric samples. As a typical result, 50 μg/l of iron can be determined in a 10 μl sample with a nucrobore ion chromatograph-photometer and atomic absorption system and 40 μg/l of iron in a microbore ion chromatograph-total-reflection X-ray fluorescence combination.

  1. Total and free insulin-like growth factor I, insulin-like growth factor binding protein 3 and acid-labile subunit reflect clinical activity in acromegaly

    DEFF Research Database (Denmark)

    Sneppen, S B; Lange, Merete Wolder; Pedersen, L M;

    2001-01-01

    The aim was to evaluate, markers of disease activity in acromegaly in relation to perceived disease activity. Thirty-seven consecutively treated, acromegalic patients, classified by clinical symptoms as inactive (n=16), slightly active (n=10) and active (n=11), entered the study. When evaluating......-like growth factor binding protein-3 (IGFBP-3) with PV(pos) of 0.69 and 0.71 and PV(neg) of 0.91 and 0.92 respectively. We conclude that free IGF-I is more closely related than total IGF-I to perceived disease activity and is as such useful when evaluating previously treated acromegaly for disease activity...

  2. Design and Fabrication of a Dielectric Total Internal Reflecting Solar Concentrator and Associated Flux Extractor for Extreme High Temperature (2500K) Applications

    Science.gov (United States)

    Soules, Jack A.; Buchele, Donald R.; Castle, Charles H.; Macosko, Robert P.

    1997-01-01

    The Analex Corporation, under contract to the NASA Lewis Research Center (LeRC), Cleveland, Ohio, recently evaluated the feasibility of utilizing refractive secondary concentrators for solar heat receivers operating at temperatures up to 2500K. The feasibility study pointed out a number of significant advantages provided by solid single crystal refractive devices over the more conventional hollow reflective compound parabolic concentrators (CPCs). In addition to the advantages of higher concentration ratio and efficiency, the refractive concentrator, when combined with a flux extractor rod, provides for flux tailoring within the heat receiver cavity. This is a highly desirable, almost mandatory, feature for solar thermal propulsion engine designs presently being considered for NASA and Air Force thermal applications. Following the feasibility evaluation, the NASA-LeRC, NASA-Marshall Space Flight Center (MSFC), and Analex Corporation teamed up to design, fabricate, and test a refractive secondary concentrator/flux extractor system for potential use in the NASA-MSFC "Shooting Star" flight experiment. This paper describes the advantages and technical challenges associated with the design methodologies developed and utilized and the material and fabrication limitations encountered.

  3. Mapping of Total Carbon and Clay Contents in Glacial Till Soil Using On-the-Go Near-Infrared Reflectance Spectroscopy and Partial Least Squares Regression

    Institute of Scientific and Technical Information of China (English)

    SHEN Zhang-Quan; SHAN Ying-Jie; PENG Li; JIANG Yu-Gen

    2013-01-01

    Characterizing spatial variability of soil attributes,using traditional soil sampling and laboratory analysis,is cost prohibitive.The potential benefit of managing soils on a site-specific basis is well established.High variations in glacial till soil render detailed soil mapping difficult with limited number of soil samples.To overcome this problem,this paper demonstrates the feasibility of soil carbon and clay mapping using the newly developed on-the-go near-infrared reflectance spectroscopy (NIRS).Compared with the geostatistics method,the partial least squares regression (PLSR),with NIRS measurements,could yield a more detailed map for both soil carbon and clay.Further,by using independent validation dataset,the accuracy of predicting could be improved significantly for soil clay content and only slightly for soil carbon content.Owing to the complexity of field conditions,more work on data processing and calibration modeling might be necessary for using on-the-go NIRS measurements.

  4. Relative abundance of total subgingival plaque-specific bacteria in salivary microbiota reflects the overall periodontal condition in patients with periodontitis

    Science.gov (United States)

    Kageyama, Shinya; Takeshita, Toru; Asakawa, Mikari; Shibata, Yukie; Takeuchi, Kenji; Yamanaka, Wataru

    2017-01-01

    Increasing attention is being focused on evaluating the salivary microbiota as a promising method for monitoring oral health; however, its bacterial composition greatly differs from that of dental plaque microbiota, which is a dominant etiologic factor of oral diseases. This study evaluated the relative abundance of subgingival plaque-specific bacteria in the salivary microbiota and examined a relationship between the abundance and severity of periodontal condition in patients with periodontitis. Four samples (subgingival and supragingival plaques, saliva, and tongue coating) per each subject were collected from 14 patients with a broad range of severity of periodontitis before periodontal therapy. The bacterial composition was analyzed by 16S rRNA gene amplicon sequencing using Ion PGM. Of the 66 species-level operational taxonomic units (OTUs) representing the mean relative abundance of ≥ 1% in any of the four niches, 12 OTUs corresponding to known periodontal pathogens, including Porphyromonas gingivalis, were characteristically predominant in the subgingival plaque and constituted 37.3 ± 22.9% of the microbiota. The total relative abundance of these OTUs occupied only 1.6 ± 1.2% of the salivary microbiota, but significantly correlated with the percentage of diseased sites (periodontal pocket depth ≥ 4 mm; r = 0.78, P periodontal therapy, the total relative abundance of these 12 OTUs was evaluated as well as before periodontal therapy and reductions of the abundance through periodontal therapy were strongly correlated in saliva and subgingival plaque (r = 0.81, P periodontal health. PMID:28369125

  5. Experimental and theoretical studies on visible light attenuation in water

    CERN Document Server

    Simpson, A; Cho, H J; Liu, H

    2014-01-01

    In this study we describe lab experiments on determining the above water reflectance Rrs coefficient, and the water attenuation coefficient Kd for fresh water. Different types of screens (totally absorbent, gray, etc.) were submerged in water (0-0.6 m) and illuminated from outside. The spectral density of the water leaving radiance was measured for different depths. The results were ran by a code which took into account the geometry of the incident irradiation, the geometry of the screen under water, and boundary conditions at the water surface provided by the radiation transfer theory. From the experimental data and our model we obtain the spectral distribution of the attenuation coefficient for fresh water and compared it with other data in literature. These experiments, performed in the Nonlinear Wave Lab at ERAU# represent just a preliminary calibration of the experimental protocol. More tests with water of different degrees of turbidity, and possibly wave filed at the water surface are in progress and wi...

  6. Comb Filtering Properties of Total Reflection Tunnelling in Cylindrical Photonic Crystals%圆柱光子晶体全反射隧穿的梳状滤波特性

    Institute of Scientific and Technical Information of China (English)

    刘启能

    2012-01-01

    To study comb filtering properties of tunnelling in total reflection of light in ID cylindrical photonic crystals, transition matrix method is adopted. Transmissivity of light is studied as incident angle is greater than full reflection angle. Tunnelling under condition of total reflection is found in transmitting waves. Good comb filtering characteristics is shown. Responses of tunnelling versus period, quantum number of mode, and cylinder radius are obtained. They are basis for design of high-quality comb filters.%研究一维圆柱光子晶体的全反射隧穿的梳状滤波特性,利用传输矩阵法计算光在大于全反射角入射一维圆柱光子晶体的透射率.在透射波中发现全反射隧穿效应,全反射隧穿峰具有优良的梳状滤波特性.得到圆柱光子晶体的全反射隧穿随周期数、模式量子数以及圆柱半径的变化特征,为设计性能优良的梳状光子晶体滤波器提供理论依据.

  7. Reflecting reflection in supervision

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    Reflection has moved from the margins to the mainstream in supervision. Notions of reflection have become well established since the late 1980s. These notions have provided useful framing devices to help conceptualize some important processes in guidance and counseling. However, some applications...

  8. 无限周期声子晶体全反射隧穿效应的机理研究%The mechanism of the total reflection tunnel effect of infinite period phononic crystal

    Institute of Scientific and Technical Information of China (English)

    刘启能

    2012-01-01

    Set up a resonant cavity model and the analytical formulas of the total reflection tunnel effect frequency of 1D infinite period phononic crystal is deduced by resonance conditions of the resonant cavity. The physical mechanism of the total reflection tunnel effect of 1D infinite period phononic crystal is explained. Using the analytical formulas the change rule of the total reflection runnel effect that response curves of frequency versus order number of band and incident angle and thickness of resonant cavity are studied. Resonance theory results and dispersion method results are compared and their results are the same.%建立了一维无限周期声子晶体的谐振腔模型,利用谐振腔的共振条件推导出金反射隧穿导带频率满足的解析公式,从理论上解释了一维无限周期声子晶体全反射隧穿效应产生的物理机理.利用频率的解析公式对全反射隧穿导带的频率随导带级数、腔厚度以及入射角的变化规律进行了研究,圆满地解释了一维无限周期声子晶体的全反射隧穿效应的变化规律.并且将共振理论的结果与色散法的结果进行比较,其结果完全吻合.

  9. The New Progress of XAFS Study at BSRF——Total Reflection XAFS Method%BSRF XAFS的新进展——全反射XAFS实验方法

    Institute of Scientific and Technical Information of China (English)

    谢亚宁; 刘涛; 胡天斗

    2001-01-01

    Total reflection XAFS method is an important aspect in XAFSstudy, and can be applied to the study of surface and interface structure of materials. To develop this experimental system is one of the projects carried out at XAFS station in BSRF. The goniometer for sample, an important device, has been made and the whole experimental system is under commissioning at the present stage. The mechanical structure of the goniometer, the configuration of the experimental system, the scheme for setting up the system and the primary result are described. Also the application for total reflection XAFS and DAFS with this system are briefly discussed in this paper.%开展全反射XAFS研究是BSRFXAFS实验站的发展课题之一.目前关键设备全反射实验样品台已加工完成,正处于安装及系统调试阶段.本文介绍了样品台的结构原理,全反射实验系统的构成、设置调整方案及初步实验结果.此外还讨论了应用该设备可开展的全反射XAFS,DAFS等实验方法.

  10. Lens testing using total internal reflection holography

    Science.gov (United States)

    Hildebrand, Bernard P.

    1976-12-14

    Accurate, rapid and inexpensive testing and inspecting of lens surfaces tugh holographic means requiring no beamsplitters, mirrors or overpower optics, and wherein a hologram formed in accordance with one aspect of the invention contains the entire interferometer and serves as both a master and illuminating source for both concave and convex surfaces to be so tested.

  11. On the excess attenuation of sound in the atmosphere

    Science.gov (United States)

    Deloach, R.

    1975-01-01

    The attenuation suffered by an acoustic plane wave propagating from an elevated source to the ground, in excess of absorption losses, was studied. Reported discrepancies between attenuation measurements made in the field and theories which only account for absorption losses are discussed. It was concluded that the scattering of sound by turbulence results in a nonnegligible contribution to the total attenuation.

  12. Reflective Teaching

    Science.gov (United States)

    Farrell, Thomas S. C.

    2013-01-01

    Thomas Farrell's "Reflective Teaching" outlines four principles that take teachers from just doing reflection to making it a way of being. Using the four principles, Reflective Practice Is Evidence Based, Reflective Practice Involves Dialogue, Reflective Practice Links Beliefs and Practices, and Reflective Practice Is a Way of Life,…

  13. Use of attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy in direct, non-destructive, and rapid assessment of developmental cotton fibers grown in planta and in culture

    Science.gov (United States)

    Cotton fibers are routinely harvested from cotton plants (in planta), and their end-use qualities depend on their development stages. Cotton fibers are also cultured at controlled laboratory environments, so that cotton researchers can investigate many aspects of experimental protocols in cotton bre...

  14. Attenuation coefficients for water quality trading.

    Science.gov (United States)

    Keller, Arturo A; Chen, Xiaoli; Fox, Jessica; Fulda, Matt; Dorsey, Rebecca; Seapy, Briana; Glenday, Julia; Bray, Erin

    2014-06-17

    Water quality trading has been proposed as a cost-effective approach for reducing nutrient loads through credit generation from agricultural or point source reductions sold to buyers facing costly options. We present a systematic approach to determine attenuation coefficients and their uncertainty. Using a process-based model, we determine attenuation with safety margins at many watersheds for total nitrogen (TN) and total phosphorus (TP) loads as they transport from point of load reduction to the credit buyer. TN and TP in-stream attenuation generally increases with decreasing mean river flow; smaller rivers in the modeled region of the Ohio River Basin had TN attenuation factors per km, including safety margins, of 0.19-1.6%, medium rivers of 0.14-1.2%, large rivers of 0.13-1.1%, and very large rivers of 0.04-0.42%. Attenuation in ditches transporting nutrients from farms to receiving rivers is 0.4%/km for TN, while for TP attenuation in ditches can be up to 2%/km. A 95 percentile safety margin of 30-40% for TN and 6-10% for TP, applied to the attenuation per km factors, was determined from the in-stream sensitivity of load reductions to watershed model parameters. For perspective, over 50 km a 1% per km factor would result in 50% attenuation = 2:1 trading ratio.

  15. Photonic Crystal Fiber Attenuator

    Institute of Scientific and Technical Information of China (English)

    Joo; Beom; Eom; Hokyung; Kim; Jinchae; Kim; Un-Chul; Paek; Byeong; Ha; Lee

    2003-01-01

    We propose a novel fiber attenuator based on photonic crystal fibers. The difference in the modal field diameters of a conventional single mode fiber and a photonic crystal fiber was used. A variable optical attenuator was also achieved by applying macro-bending on the PCF part of the proposed attenuator

  16. Analytical Study on Total Reflection Tunnel Effect of 1-D Photonic Crystal%一维光子晶体的全反射隧穿效应的解析研究

    Institute of Scientific and Technical Information of China (English)

    刘启能

    2012-01-01

    In order to obtain analytic theory of ID photonic crystal, multi beam interference theory is used. Analytical formulas of total reflection tunnel effect frequency of ID photonic crystal is deduced. Physical mechanism of total reflection tunnel effect of ID photonic crystal is explained. Using the analytical formulas change rule of total reflection tunnel effect that response curves of frequency versus cycle number and incident angle and optical thickness are studied. Transmission matrix method and analytical method is compared and their results are the same, which indicates that analytical method is the right way. Analytical theory to analyze variable relation is convenient, it makes up deficiency of numerical calculation method of ID photonic crystal.%为研究一维光子晶体全反射隧穿效应的解析理论,利用多光束干涉理论推导出一维光子晶体的全反射隧穿导带频率满足的解析公式,从理论上解释了一维光子晶体的全反射隧穿效应产生的物理机理.利用频率的解析公式对全反射隧穿导带的频率随周期数、入射角以及周期光学厚度的变化规律进行了解析研究.并与传输矩阵法的计算结果进行了比较,结果发现两种方法得出的结论是吻合的,从而证明了解析理论的正确性.解析理论便于对各参量间的依赖关系进行解析研究,弥补了一维光子晶体研究中数值计算方法的不足.

  17. Tracer attenuation in groundwater

    Science.gov (United States)

    Cvetkovic, Vladimir

    2011-12-01

    The self-purifying capacity of aquifers strongly depends on the attenuation of waterborne contaminants, i.e., irreversible loss of contaminant mass on a given scale as a result of coupled transport and transformation processes. A general formulation of tracer attenuation in groundwater is presented. Basic sensitivities of attenuation to macrodispersion and retention are illustrated for a few typical retention mechanisms. Tracer recovery is suggested as an experimental proxy for attenuation. Unique experimental data of tracer recovery in crystalline rock compare favorably with the theoretical model that is based on diffusion-controlled retention. Non-Fickian hydrodynamic transport has potentially a large impact on field-scale attenuation of dissolved contaminants.

  18. Microwave attenuation with composite of copper microwires

    Energy Technology Data Exchange (ETDEWEB)

    Gorriti, A.G.; Marin, P. [Instituto de Magnetismo Aplicado, (UCM-ADIF-CSIC) and Departamento de Fisica de Materiales (UCM). P.O. Box 155, Las Rozas, Madrid 28230 (Spain); Cortina, D. [Micromag S.L., Las Rozas, Madrid 28230 (Spain); Hernando, A., E-mail: antonio.hernando@adif.e [Instituto de Magnetismo Aplicado, (UCM-ADIF-CSIC) and Departamento de Fisica de Materiales (UCM). P.O. Box 155, Las Rozas, Madrid 28230 (Spain); Micromag S.L., Las Rozas, Madrid 28230 (Spain)

    2010-05-15

    It is shown that copper microwires composite media attenuates microwave reflection of metallic surfaces. We show how the distance to the metallic surface, as well as the length and volume fraction of microwires, determine the frequency of maximum absorption and the return loss level. Furthermore, we were able to fit the experimental results with a theoretical model based on Maxwell-Garnett mixing formula.

  19. Mechanisms of geometrical seismic attenuation

    Directory of Open Access Journals (Sweden)

    Igor B. Morozov

    2011-07-01

    Full Text Available In several recent reports, we have explained the frequency dependence of the apparent seismic quality-factor (Q observed in many studies according to the effects of geometrical attenuation, which was defined as the zero-frequency limit of the temporal attenuation coefficient. In particular, geometrical attenuation was found to be positive for most waves traveling within the lithosphere. Here, we present three theoretical models that illustrate the origin of this geometrical attenuation, and we investigate the causes of its preferential positive values. In addition, we discuss the physical basis and limitations of both the conventional and new attenuation models. For waves in media with slowly varying properties, geometrical attenuation is caused by variations in the wavefront curvature, which can be both positive (for defocusing and negative (for focusing. In media with velocity/density contrasts, incoherent reflectivity leads to geometrical-attenuation coefficients which are proportional to the mean squared reflectivity and are always positive. For «coherent» reflectivity, the geometrical attenuation is approximately zero, and the attenuation process can be described according to the concept of «scattering Q». However, the true meaning of this parameter is in describing the mean reflectivity within the medium, and not that of the traditional resonator quality factor known in mechanics. The general conclusion from these models is that non-zero and often positive levels of geometrical attenuation are common in realistic, heterogeneous media, both observationally and theoretically. When transformed into the conventional Q-factor form, this positive geometrical attenuation leads to Q values that quickly increase with frequency. These predictions show that the positive frequency-dependent Q observed in many datasets might represent artifacts of the transformations of the attenuation coefficients into Q.

  1. Quantitative determination on heavy metals in different stages of wine production by Total Reflection X-ray Fluorescence and Energy Dispersive X-ray Fluorescence: Comparison on two vineyards

    Science.gov (United States)

    Pessanha, Sofia; Carvalho, Maria Luisa; Becker, Maria; von Bohlen, Alex

    2010-06-01

    The purpose of this study is to determine the elemental content, namely heavy metals, of samples of vine-leaves, grapes must and wine. In order to assess the influence of the vineyard age on the elemental content throughout the several stages of wine production, elemental determinations of trace elements were made on products obtained from two vineyards aged 6 and 14 years from Douro region. The elemental content of vine-leaves and grapes was determined by Energy Dispersive X-Ray Fluorescence (EDXRF), while analysis of the must and wine was performed by Total Reflection X-ray Fluorescence (TXRF). Almost all elements present in wine and must samples did not exceed the recommended values found in literature for wine. Bromine was present in the 6 years old wine in a concentration 1 order of magnitude greater than what is usually detected. The Cu content in vine-leaves from the older vineyard was found to be extremely high probably due to excessive use of Cu-based fungicides to control vine downy mildew. Higher Cu content was also detected in grapes although not so pronounced. Concerning the wine a slightly higher level was detected on the older vineyard, even so not exceeding the recommended value.

  2. A new technique for the deposition of standard solutions in total reflection X-ray fluorescence spectrometry (TXRF) using pico-droplets generated by inkjet printers and its applicability for aerosol analysis with SR-TXRF

    Energy Technology Data Exchange (ETDEWEB)

    Fittschen, U.E.A. [University of Hamburg, Department of Chemistry, University of Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany)]. E-mail: ursula.fittschen@chemie.uni-hamburg.de; Hauschild, S. [University of Hamburg, Department of Chemistry, University of Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany); Amberger, M.A. [University of Hamburg, Department of Chemistry, University of Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany); Lammel, G. [Max Planck Institute for Meteorology, Bundesstrasse 53, 20146 Hamburg (Germany); Streli, C. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Vienna (Austria); Foerster, S. [University of Hamburg, Department of Chemistry, University of Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany); Wobrauschek, P. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Vienna (Austria); Jokubonis, C. [Atominstitut, Vienna University of Technology, Stadionallee 2, 1020 Vienna (Austria); Pepponi, G. [ITC-irst, Via Sommarive 18, 38050 Povo (Trento) (Italy); Falkenberg, G. [Hamburger Synchrotronstrahlungslabor at Deutsches Elektronen-Synchrotron DESY, Notkestr. 85, 22603 Hamburg (Germany); Broekaert, J.A.C. [University of Hamburg, Department of Chemistry, University of Hamburg, Martin-Luther-King-Platz 6, 20146 Hamburg (Germany)

    2006-11-15

    A new technique for the deposition of standard solutions on particulate aerosol samples using pico-droplets for elemental determinations with total reflection X-ray fluorescence spectrometry (TXRF) is described. It enables short analysis times without influencing the sample structure and avoids time consuming scanning of the sample with the exciting beam in SR-TXRF analysis. Droplets of picoliter volume ({approx} 5-130 pL) were generated with commercially available and slightly modified inkjet printers operated with popular image processing software. The size of the dried droplets on surfaces of different polarity namely silicone coated and untreated quartz reflectors, was determined for five different printer types and ten different cartridge types. The results show that droplets generated by inkjet printers are between 50 and 200 {mu}m in diameter (corresponding to volumes of 5 to 130 pL) depending on the cartridge type, which is smaller than the width of the synchrotron beam used in the experiments (< 1 mm at an energy of 17 keV at the beamline L at HASYLAB, Hamburg). The precision of the printing of a certain amount of a single element standard solution was found to be comparable to aliquoting with micropipettes in TXRF, where for 2.5 ng of cobalt relative standard deviations of 12% are found. However, it could be shown that the printing of simple patterns is possible, which is important when structured samples have to be analysed.

  3. Communication: Coordination structure of bromide ions associated with hexyltrimethylammonium cations at liquid/liquid interfaces under potentiostatic control as studied by total-reflection X-ray absorption fine structure.

    Science.gov (United States)

    Nagatani, Hirohisa; Harada, Makoto; Tanida, Hajime; Sakae, Hiroki; Imura, Hisanori

    2014-03-14

    Total-reflection X-ray absorption fine structure (TR-XAFS) technique was applied for the first time to an interface between two immiscible electrolyte solutions under potentiostatic control. The hydration structure of bromide ions was investigated at polarized 2-octanone/water interfaces. TR-XAFS spectra at Br K-edge measured in the presence of hexyltrimethylammonium bromide (C6TAB) were slightly modified depending on the Galvani potential difference (Δ(o)(w)φ). The extended X-ray absorption fine structure analysis exposed hydration structure changes of bromide ions at the polarized interface. The coordination structure of bromide ions at the interface could be analyzed as compared with bromide ions dissolved in aqueous solution and Br(-)-exchanged resin having quaternary ammonium groups. The results indicated that bromide ions were associated with C6TA(+) at the polarized interface. The relative contribution of ion association form of bromide ions with quaternary ammonium groups was enhanced at a potential close to the ion transfer of C6TA(+), where the interfacial concentration of C6TA(+) is increased as a function of Δ(o)(w)φ.

  4. Nucleation-fibrillation dynamics of Aβ1-40 peptides on liquid-solid surface studied by total-internal-reflection fluorescence microscopy coupled with quartz-crystal microbalance biosensor

    Science.gov (United States)

    Hamada, Hiroki; Ogi, Hirotsugu; Noi, Kentaro; Yagi, Hisashi; Goto, Yuji; Hirao, Masahiko

    2015-07-01

    We have successfully developed the total-internal-reflection-fluorescence microscopy combined with a quartz-crystal microbalance (TIRFM-QCM) biosensor, and monitored the nucleation-fibrillation phenomenon of amyloid β1-40 peptide on the naked quartz surface. The cross-β-sheet structures were visualized with the TIRFM using the thioflavin-T (Th-T) label, and other unlabeled aggregates were detected through the frequency change of the 58-MHz wireless-electrodeless QCM throughout the aggregation reaction. The QCM response indicates significant adsorption of the peptides on the quartz surface at the early stage, which is followed by fibrillation. The non-cross-β-sheet oligomers are first formed, and nuclei appear in the oligomer region, from which fibrils originate and elongate. The two-color TIRFM observation was performed after the aggregation reaction with the Nile-red label as well as the ThT label for identifying nucleation from non-β-sheet regions. An aggregation model is proposed.

  5. Unraveling transition metal dissolution of Li1.04Ni1/3Co1/3Mn1/3O2 (NCM 111) in lithium ion full cells by using the total reflection X-ray fluorescence technique

    Science.gov (United States)

    Evertz, Marco; Horsthemke, Fabian; Kasnatscheew, Johannes; Börner, Markus; Winter, Martin; Nowak, Sascha

    2016-10-01

    In this work we investigated the transition metal dissolution of the layered cathode material Li1.04Ni1/3Co1/3Mn1/3O2 in dependence on the cycle number and cut-off cell voltage during charge by using the total reflection X-ray fluorescence technique for the elemental analysis of the specific lithium ion battery degradation products. We could show that with ongoing cycling transition metal dissolution from the cathode increased over time. However, it was less pronounced at 4.3 V compared to elevated charge cut-off voltages of 4.6 V. After a maximum of 100 cycles, we detected an overall transition metal loss of 0.2 wt‰ in relation to the whole cathode active material for cells cycled to 4.3 V. At an increased charge cut-off voltage of 4.6 V, 4.5 wt‰ transition metal loss in relation to the whole cathode active material could be detected. The corresponding transition metal dissolution induced capacity loss at the cathode could thus be attributed to 1.2 mAh g-1. Compared to the overall capacity loss of 80 mAh g-1 of the complete cell after 100 galvanostatic charge/discharge cycles the value is quite low. Hence, the overall full cell capacity fade cannot be assigned exclusively to the transition metal dissolution induced cathode fading.

  6. The retardation of vasculopathy induced by attenuation of insulin resistance in the corpulent JCR:LA-cp rat is reflected by decreased vascular smooth muscle cell proliferation in vivo.

    Science.gov (United States)

    Absher, P M; Schneider, D J; Baldor, L C; Russell, J C; Sobel, B E

    1999-04-01

    Proliferation in vivo of vascular smooth muscle cells occurs early in the course of atherosclerosis. Cultured smooth muscle cells (SMCs) explanted from aortas of JCR:LA-cp corpulent rats known to exhibit metabolic derangements and insulin resistance typical of type II diabetes early in life and to develop atherosclerosis later in life exhibit increased proliferation compared with SMCs from lean, normal rats. Vascular smooth muscle proliferation in vitro was found to be positively and significantly correlated with plasma insulin levels in vivo. Proliferation of aortic SMCs from JCR:LA-cp cp/cp corpulent rats cultured in vitro exhibited increased proliferation in the presence of exogenous insulin. Exercise and diet, selected as interventions designed to ameliorate the insulin resistance and hyperinsulinemia in the JCR:LA-cp cp/cp rat, effectively lowered blood insulin levels and decreased subsequent proliferation in vitro of aortic SMCs explanted from these animals. The results indicate that assessment of proliferation of vascular smooth muscle cells ex vivo may provide insight into the presence and severity of atherogenicity in association with insulin resistance in diverse species under diverse circumstances. Accordingly, with appropriate controls, it may be possible to use SMC proliferation ex vivo as a marker of the extent to which an intervention such as administration of insulin sensitizers to experimental animals and human subjects results in a change in behavior of vessel wall elements potentially indicative of amelioration of atherogenicity and detectable as judged from reduced proliferative rates of the cells ex vivo when they have been harvested from vessels exposed to a milieu in which insulin resistance has been attenuated.

  7. Reflective Writing

    DEFF Research Database (Denmark)

    Ahrenkiel Jørgensen, Andriette

    2016-01-01

    Høeg etetera. The dialogues work as a tool of reflection in terms of providing opportunity to examine his own beliefs, to explore the possible reasons for engaging in a particular activity. On the basis of Sven-Ingvar Andersson’s book a teaching program at the Aarhus School of Architecture provides...... a contribution to the discussions about the role of reflection in design work and in learning situations at large. By engaging with the dialogic reflection, which is one of the four essential types of reflection, (the three others being descriptive writing, descriptive reflection and critical reflection...

  8. 感性整体与反思整体--麦克卢汉、海德格尔与维科的互文阐释%Perceptive Totality and Reflective Totality---An inter-textual study of McLuhan, Heidegger and Vico

    Institute of Scientific and Technical Information of China (English)

    金惠敏

    2014-01-01

    如今麦克卢汉已经成为我们理解媒介社会的一把钥匙,这把钥匙具体说就是对媒介技术的感性视角。文章以麦克卢汉对海德格尔的一次援引为研究对象,并延及维科的“复归”思想,其主线是展示麦克卢汉对感性视角的运用,这个视角的特点是对整体性的寻找。文章在对维科“复归”思想的讨论中,区别了两种整体性:感性整体和反思整体。麦克卢汉追求的是前者,而非后者,因而其价值取向是人文主义,但这是被电子媒介所更新了的人文主义。%McLuhan is now widely regarded as a key to open the secrets of the media society. This key is the perspective of per-ception concerning media technology. Dealing with McLuhan’s reference to Heidegger and his interpretation of Heidegger in the context of Vico’s theory of“ricorsi”, this article is intended to expose how McLuhan employs the perceptive perspective that aims at a totality. In its discussion of Vico’s conception “ricorsi”, a distinction is made sharply between perceptive totality and reflective totality. What McLuhan looks for desperately is the former but not the latter, and in this sense, McLuhan’s value-orientation is humanism, but which is updated by electronic media.

  9. Landing gear noise attenuation

    Science.gov (United States)

    Moe, Jeffrey W. (Inventor); Whitmire, Julia (Inventor); Kwan, Hwa-Wan (Inventor); Abeysinghe, Amal (Inventor)

    2011-01-01

    A landing gear noise attenuator mitigates noise generated by airframe deployable landing gear. The noise attenuator can have a first position when the landing gear is in its deployed or down position, and a second position when the landing gear is in its up or stowed position. The noise attenuator may be an inflatable fairing that does not compromise limited space constraints associated with landing gear retraction and stowage. A truck fairing mounted under a truck beam can have a compliant edge to allow for non-destructive impingement of a deflected fire during certain conditions.

  10. Design and research of total-internal-reflection solar energy concentrating module%全内反射型太阳能聚光模块设计与研究

    Institute of Scientific and Technical Information of China (English)

    王骁; 曹秒; 安志勇; 曹维国

    2016-01-01

    设计了用于太阳能聚集的全内反射(Total-internal-reflection,TIR)聚光器并采取措施进行优化,将多个TIR聚光器进行叠加放置在光波导板组成波导聚光模块。太阳光线经TIR聚光器阵列收集后照射到光波导板上并在其内部传播,由末端的光伏电池吸收。由实验结果可知,在光波导板长度为400 mm增至4800 mm的过程中,光学效率由88.6%降低为40.2%,而辐照度由212 W/m2增长为980 W/m2。这样根据不同需求选取不同长度的光波导板,并在保证较高的输出功率的前提下大大减少所需使用的光伏电池面积,同时TIR聚光器只需水平放置在光波导板上,避免了透镜阵列与光波导板的严格对准要求,降低了制造与装配成本。%Total-internal-reflection(TIR) concentrator for solar concentration was designed, and a series of measures was adopted to optimize. Then lots of TIR concentrators was superimposed and assembled on the waveguide slab to form the waveguide concentrating module. Collected by the TIR concentrator array, the sun light incident on the waveguide slab continued to propagate in it, and was absorbed by the photovoltaic cells in the end. The experimental result shows that when the length of the waveguide slab increased from 400 mm to 4 800 mm, the optical efficiency decreased from 88.6% to 40.2%, while the irradiance concentration grew from 212 W/m2 to 980 W/m2. Thus different lengths of the waveguide slab can be selected according to different requirements. While getting the high output power, the area of photovoltaic cells used is decimated. At the same time, the TIR concentrator can be just placed on the waveguide slab, avoiding the demand of aligning strictly the lens array and the waveguide slab, which is convenient in installation and adjustment.

  11. A novel vacuum spectrometer for total reflection x-ray fluorescence analysis with two exchangeable low power x-ray sources for the analysis of low, medium, and high Z elements in sequence

    Energy Technology Data Exchange (ETDEWEB)

    Wobrauschek, P., E-mail: wobi@ati.ac.at; Prost, J.; Ingerle, D.; Kregsamer, P.; Streli, C. [Atominstitut, TU Wien, Stadionallee 2, 1020 Vienna (Austria); Misra, N. L. [Fuel Chemistry Division, Bhabha Atomic Research Centre (BARC), Mumbai 400085 (India)

    2015-08-15

    The extension of the detectable elemental range with Total Reflection X-ray Fluorescence (TXRF) analysis is a challenging task. In this paper, it is demonstrated how a TXRF spectrometer is modified to analyze elements from carbon to uranium. Based on the existing design of a vacuum TXRF spectrometer with a 12 specimen sample changer, the following components were renewed: the silicon drift detector with 20 mm{sup 2} active area and having a special ultra-thin polymer window allowing the detection of elements from carbon upwards. Two exchangeable X-ray sources guarantee the efficient excitation of both low and high Z elements. These X-ray sources were two light-weighted easily mountable 35 W air-cooled low-power tubes with Cr and Rh anodes, respectively. The air cooled tubes and the Peltier-cooled detector allowed to construct a transportable tabletop spectrometer with compact dimensions, as neither liquid nitrogen cooling for the detector nor a water cooling circuit and a bulky high voltage generator for the X-ray tubes are required. Due to the excellent background conditions as a result of the TXRF geometry, detection limits of 150 ng for C, 12 ng for F, and 3.3 ng for Na have been obtained using Cr excitation in vacuum. For Rh excitation, the detection limits of 90 pg could be achieved for Sr. Taking 10 to 20 μl of sample volume, extrapolated detection limits in the ng/g (ppb) range are resulting in terms of concentration.

  12. The influence of the solid waste disposal areas in Campinas city, Sao Paulo state (Brazil) on water quality: determination of metals using synchrotron radiation total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Bruna F.F., E-mail: bffaria@yahoo.com.br [Universidade Federal de Uberlandia (UFU), Uberlandia, MG (Brazil). Inst. de Ciencias Agrarias. Dept. de Engenharia Ambiental; Moreira, Silvana; Canteras, Felippe Benavente, E-mail: silvana@fec.unicamp.br, E-mail: felippe.canteras@gmail.com [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Dept. de Saneamento e Ambiente

    2013-07-01

    Among the many forms of waste disposal, landfills today are best suited to Brazilian conditions, this because their construction allows minimizing the negative effects of landfill gas and slurry produced. However, the confinement of pollutants from landfills is linked to its construction and operation and when the construction and/or is wrong they can endanger air, groundwater and surface waters qualities. Thus, the main objective of this study was to analyze the concentration of heavy metals in samples of groundwater, surface water and slurry coming from solid waste disposal locations in the city of Campinas, SP - Delta, Santa Barbara and Pirelli Landfills. The samples were analyzed at the Brazilian Synchrotron Light Laboratory using Synchrotron Radiation Total Reflection X-Ray Fluorescence technique (SR-TXRF). In Pirelli Landfill, the highest concentrations were observed in one of the wells located to downstream of the Landfill (in relation to the groundwater flux) - the monitoring well PM04, exceeding the intervention value defined by CETESB. For Santa Barbara landfill in one upstream monitoring well the concentrations of Ni, Mn, Pb and Cr, surpassed the maximum permissive values. The manganese in Landfill Delta showed to be higher in wells located downstream and 50% of the wells analyzed exceeded the maximum permissive value for groundwater samples. In the case of surface waters located in the vicinity of landfill sites, the metals that surpassed the maximum permissive values according the legislation in most of the points analyzed were Mn, Cu and Pb. For slurry samples collected in Delta Landfill, the average concentrations for Mn, Ni, Cu and Pb not exceeded the maximum permissive values during the period studied. Moreover for Santa Barbara the average concentration of Mn, Cu and Zn surpassed the permissive limits, as was observed for Mn in the Pirelli Landfill. (author)

  13. Absorption enhancement and total absorption in a graphene-waveguide hybrid structure

    Science.gov (United States)

    Guo, Jun; Wu, Leiming; Dai, Xiaoyu; Xiang, Yuanjiang; Fan, Dianyuan

    2017-02-01

    We propose a graphene/planar waveguide hybrid structure, and demonstrate total absorption in the visible wavelength range by means of attenuated total reflectance. The excitation of planar waveguide mode, which has strong near field enhancement and increased light interaction length with graphene, plays a vital role in total absorption. We analyze the origin and physical insight of total absorption theoretically by using an approximated reflectance, and show how to design such hybrid structure numerically. Utilizing the tunability of doped graphene, we discuss the possible application in optical modulators. We also achieve broadband absorption enhancement in near-IR range by cascading multiple graphene-waveguide hybrid structures. We believe our results will be useful not only for potential applications in optical devices, but also for studying other two-dimension materials.

  14. Absorption enhancement and total absorption in a graphene-waveguide hybrid structure

    Directory of Open Access Journals (Sweden)

    Jun Guo

    2017-02-01

    Full Text Available We propose a graphene/planar waveguide hybrid structure, and demonstrate total absorption in the visible wavelength range by means of attenuated total reflectance. The excitation of planar waveguide mode, which has strong near field enhancement and increased light interaction length with graphene, plays a vital role in total absorption. We analyze the origin and physical insight of total absorption theoretically by using an approximated reflectance, and show how to design such hybrid structure numerically. Utilizing the tunability of doped graphene, we discuss the possible application in optical modulators. We also achieve broadband absorption enhancement in near-IR range by cascading multiple graphene-waveguide hybrid structures. We believe our results will be useful not only for potential applications in optical devices, but also for studying other two-dimension materials.

  15. Total algorithms

    NARCIS (Netherlands)

    Tel, G.

    1993-01-01

    We define the notion of total algorithms for networks of processes. A total algorithm enforces that a "decision" is taken by a subset of the processes, and that participation of all processes is required to reach this decision. Total algorithms are an important building block in the design of distri

  16. Estimating Total Nitrogen Content in Wetland Vegetation Based on Measured Reflectance Spectra%基于地面实测光谱的湿地植物全氮含量估算研究

    Institute of Scientific and Technical Information of China (English)

    刘克; 赵文吉; 郭逍宇; 王翊虹; 孙永华; 苗茜

    2012-01-01

    More and more urban wetlands have been supplied with reclaimed water. And monitoring the growth condition of large-area wetland vegetation is playing a very important role in wetland restoration and reconstructioa Recently, remote sensing technology has become an important tool for vegetation growth monitoring. The South Wetland in the Olympic Park, a typical wetland using reused water, was selected as the research area. The leaf reflectance spectra and were acquired for the main wetland plants reed (Phragmites australis) and cattail (Typha angustifolia) with an ASD FieldSpec 3 spectrometer (350~ 2 500 nm). The total nitrogen (TN) content of leaf samples was determined by Kjeldahl method subsequently. The research established univariate models involving simple ratio spectral index (SR) model and normalized difference spectral index (ND) model, as well as multivariate models including stepwise multiple linear regression (SMLR) model and partial least squares regression (PLSR) model. Moreover, the accuracy of all the models was tested through cross-validated coefficient of determination (Rcv) and cross-validated root mean square error (RMSEcv). The results showed that (1) comparing different types of wetland plants, the accuracy of all established prediction models using Phragmites australis reflectance spectra was higher than that u-sing Typha angustifolia reflectance spectra. (2) compared with univariate techniques, multivariate regressions improved the estimation of TN concentration in leaves. (3) among the various investigated models, the accuracy of PLSR model was the highest (Rcv = 0. 80, RMSEcv = 0. 24). PLSR provided the most useful explorative tool for unraveling the relationship between spectral reflectance and TN consistence of leaves. The result would not only provide a scientific basis for remote sensing retrieval of biochemical variables of wetland vegetation, but also provide a strong scientific basis for the monitoring and management of urban wetlands

  17. Reflection and Non-Reflection of Particle Wavepackets

    Science.gov (United States)

    Cox, Timothy; Lekner, John

    2008-01-01

    Exact closed-form solutions of the time-dependent Schrodinger equation are obtained, describing the propagation of wavepackets in the neighbourhood of a potential. Examples given include zero reflection, total reflection and partial reflection of the wavepacket, for the sech[superscript 2]x/a, 1/x[superscript 2] and delta(x) potentials,…

  18. Study of protein stoichiometry by single-molecule imaging with total internal reflection fluorescence microscopy%应用全内反射单分子荧光成像研究蛋白复合物亚基组成

    Institute of Scientific and Technical Information of China (English)

    程茗; 李楠; 方晓红

    2012-01-01

    细胞的生化过程大都是由蛋白复合物完成的,研究蛋白复合物亚基的组成对于了解蛋白质的结构和生物学功能具有重要的意义,然而如何准确确定蛋白复合物中蛋白质亚基的数量(stoichiometry)仍然是一个挑战.近年来,活细胞体系单分子荧光成像技术的不断发展为原位实时动态地研究蛋白质的结构和性质提供了新的手段.本文主要介绍了应用活细胞全内反射单分子荧光成像技术表征细胞膜区蛋白复合物组成的3种方法,包括单分子漂白步数分析、荧光强度统计分布以及蛋白运动分析,并结合其基本原理介绍了这几种方法在活细胞体系膜蛋白研究中的应用.%Most of cellular processes are realized by protein complexes, and the study of subunits composition of protein complexes is very important for the understanding of protein structure and biological function. However, accurate determination of protein stoichiometry under the physiological conditions is still a challenge. In recent years, the development of single-molecule fluorescence imaging of living cells offers a new approach to characterize protein in real time. In this review, we first introduce the basic principle of imaging single-molecule in living cells by total internal reflection fluorescence microscopy (TIRFM) and then discuss the application of single-molecule TIRFM to study the plasma membrane protein complex in three ways, including the analysis of photobleaching step, the statistical distribution of fluorescence intensity and the dynamics of protein diffusion.

  19. Elemental analysis of human amniotic fluid and placenta by total-reflection X-ray fluorescence and energy-dispersive X-ray fluorescence: child weight and maternal age dependence

    Science.gov (United States)

    Carvalho, M. L.; Custódio, P. J.; Reus, U.; Prange, A.

    2001-11-01

    This work is an attempt to evaluate the possible influence of the mother's age in trace element concentrations in human amniotic fluid and placenta and whether these concentrations are correlated to the weight of the newborn infants. Total-reflection X-ray fluorescence (TXRF) was used to analyze 16 amniotic fluid samples, and the placenta samples were analyzed by energy dispersive X-ray fluorescence (EDXRF). The whole samples were collected during delivery from healthy mothers and healthy infants and full-term pregnancies. According to the age of the mother, three different groups were considered: 20-25, 25-30 and 30-40 years old. Only two mothers were aged more than 35 years. The weight of the infants ranged from 2.56 to 4.05 kg and three groups were also considered: 2.5-3, 3-3.5 and 3.5-4 kg. The organic matrix of the amniotic fluid samples was removed by treatment with HNO 3 followed by oxygen plasma ashing. Yttrium was used as the internal standard for TXRF analysis. Placenta samples were lyophilized and analyzed by EDXRF without any chemical treatment. Very low levels of Ni and Sr were found in the amniotic fluid samples, and were independent of the age of the mother and weight of the child. Cr, Mn, Se and Pb were at the level of the detection limit. Zn, considered one of the key elements in neonatal health, was not significantly different in the samples analyzed; however, it was weakly related to birth weigh. The concentrations obtained ranged from 0.11 to 0.92 mg/l and 30 to 65 μg/g in amniotic fluid and placenta, respectively. The only two elements which seemed to be significantly correlated with mother's age and newborn weight were Ca and Fe for both types of sample: Ca levels were increased in heavier children and older mothers; however, Fe increased with increasing maternal age, but decreased for heavier babies. The same conclusions were obtained for placenta and amniotic fluid samples. Cu is closely associated with Fe in its function in the organism

  20. Reflected Glory

    Science.gov (United States)

    2011-02-01

    HD 38563B, are the main powerhouses behind Messier 78. However, the nebula is home to many more stars, including a collection of about 45 low mass, young stars (less than 10 million years old) in which the cores are still too cool for hydrogen fusion to start, known as T Tauri stars. Studying T Tauri stars is important for understanding the early stages of star formation and how planetary systems are created. Remarkably, this complex of nebulae has also changed significantly in the last ten years. In February 2004 the experienced amateur observer Jay McNeil took an image of this region with a 75 mm telescope and was surprised to see a bright nebula - the prominent fan shaped feature near the bottom of this picture - where nothing was seen on most earlier images. This object is now known as McNeil's Nebula and it appears to be a highly variable reflection nebula around a young star. This colour picture was created from many monochrome exposures taken through blue, yellow/green and red filters, supplemented by exposures through an H-alpha filter that shows light from glowing hydrogen gas. The total exposure times were 9, 9, 17.5 and 15.5 minutes per filter, respectively. Notes [1] Igor Chekalin from Russia uncovered the raw data for this image of Messier 78 in ESO's archives in the competition Hidden Treasures (eso1102). He processed the raw data with great skill, claiming first prize in the contest for his final image (Flickr link). ESO's team of in-house image processing experts then independently processed the raw data at full resolution to produce the image shown here. More information ESO, the European Southern Observatory, is the foremost intergovernmental astronomy organisation in Europe and the world's most productive astronomical observatory. It is supported by 15 countries: Austria, Belgium, Brazil, the Czech Republic, Denmark, France, Finland, Germany, Italy, the Netherlands, Portugal, Spain, Sweden, Switzerland and the United Kingdom. ESO carries out an

  1. Planetary Ices Attenuation Properties

    Science.gov (United States)

    McCarthy, Christine; Castillo-Rogez, Julie C.

    In this chapter, we review the topic of energy dissipation in the context of icy satellites experiencing tidal forcing. We describe the physics of mechanical dissipation, also known as attenuation, in polycrystalline ice and discuss the history of laboratory methods used to measure and understand it. Because many factors - such as microstructure, composition and defect state - can influence rheological behavior, we review what is known about the mechanisms responsible for attenuation in ice and what can be inferred from the properties of rocks, metals and ceramics. Since attenuation measured in the laboratory must be carefully scaled to geologic time and to planetary conditions in order to provide realistic extrapolation, we discuss various mechanical models that have been used, with varying degrees of success, to describe attenuation as a function of forcing frequency and temperature. We review the literature in which these models have been used to describe dissipation in the moons of Jupiter and Saturn. Finally, we address gaps in our present knowledge of planetary ice attenuation and provide suggestions for future inquiry.

  2. Frequency Dependent Attenuation Revisited

    CERN Document Server

    Richard, Kowar; Xavier, Bonnefond

    2009-01-01

    The work is inspired by thermo-and photoacoustic imaging, where recent efforts are devoted to take into account attenuation and varying wave speed parameters. In this paper we study causal equations describing propagation of attenuated pressure waves. We review standard models like frequency power laws and and the thermo-viscous equation. The lack of causality of standard models in the parameter range relevant for photoacoustic imaging requires to derive novel equations. The main ingredients for deriving causal equations are the Kramers-Kronig relation and the mathematical concept of linear system theory. The theoretical results of this work are underpined by numerical experiments.

  3. Quantifying Reflection

    DEFF Research Database (Denmark)

    Alcock, Gordon Lindsay

    2013-01-01

    . It contrasts the students’ self-assessment in a range of ‘product’ skills such as Revit, Structural Design, Mathematics of construction, Technical Installations; as well as ‘process’ competencies such as ‘Working in a team’, Sharing knowledge, Maintaining a portfolio and Reflecting ON learning and FOR learning......´ These are all based on Blooms taxonomy and levels of competence and form a major part of individual student and group learning portfolios. Key Words :Project-Based learning, Reflective Portfolios, Self assessment, Defining learning gains, Developing learning strategies , Reflections on and for learning...

  4. Reflection ciphers

    DEFF Research Database (Denmark)

    Boura, Christina; Canteaut, Anne; Knudsen, Lars Ramkilde;

    2017-01-01

    study the necessary properties for this coupling permutation. Special care has to be taken of some related-key distinguishers since, in the context of reflection ciphers, they may provide attacks in the single-key setting.We then derive some criteria for constructing secure reflection ciphers...... and analyze the security properties of different families of coupling permutations. Finally, we concentrate on the case of reflection block ciphers and, as an illustration, we provide concrete examples of key schedules corresponding to several coupling permutations, which lead to new variants of the block...

  5. Use of borehole radar reflection logging to monitor steam-enhanced remediation in fractured limestone-results of numerical modelling and a field experiment

    Science.gov (United States)

    Gregoire, C.; Joesten, P.K.; Lane, J.W.

    2006-01-01

    Ground penetrating radar is an efficient geophysical method for the detection and location of fractures and fracture zones in electrically resistive rocks. In this study, the use of down-hole (borehole) radar reflection logs to monitor the injection of steam in fractured rocks was tested as part of a field-scale, steam-enhanced remediation pilot study conducted at a fractured limestone quarry contaminated with chlorinated hydrocarbons at the former Loring Air Force Base, Limestone, Maine, USA. In support of the pilot study, borehole radar reflection logs were collected three times (before, during, and near the end of steam injection) using broadband 100 MHz electric dipole antennas. Numerical modelling was performed to predict the effect of heating on radar-frequency electromagnetic (EM) wave velocity, attenuation, and fracture reflectivity. The modelling results indicate that EM wave velocity and attenuation change substantially if heating increases the electrical conductivity of the limestone matrix. Furthermore, the net effect of heat-induced variations in fracture-fluid dielectric properties on average medium velocity is insignificant because the expected total fracture porosity is low. In contrast, changes in fracture fluid electrical conductivity can have a significant effect on EM wave attenuation and fracture reflectivity. Total replacement of water by steam in a fracture decreases fracture reflectivity of a factor of 10 and induces a change in reflected wave polarity. Based on the numerical modelling results, a reflection amplitude analysis method was developed to delineate fractures where steam has displaced water. Radar reflection logs collected during the three acquisition periods were analysed in the frequency domain to determine if steam had replaced water in the fractures (after normalizing the logs to compensate for differences in antenna performance between logging runs). Analysis of the radar reflection logs from a borehole where the temperature

  6. GPR measurements of attenuation in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Eisenmann, David, E-mail: djeisen@cnde.iastate.edu; Margetan, Frank J., E-mail: djeisen@cnde.iastate.edu; Pavel, Brittney, E-mail: djeisen@cnde.iastate.edu [Center for Nondestructive Evaluation, Iowa State University, 1915 Scholl Road, Ames, IA 50011-3042 (United States)

    2015-03-31

    Ground-penetrating radar (GPR) signals from concrete structures are affected by several phenomenon, including: (1) transmission and reflection coefficients at interfaces; (2) the radiation patterns of the antenna(s) being used; and (3) the material properties of concrete and any embedded objects. In this paper we investigate different schemes for determining the electromagnetic (EM) attenuation of concrete from measured signals obtained using commercially-available GPR equipment. We adapt procedures commonly used in ultrasonic inspections where one compares the relative strengths of two or more signals having different travel paths through the material of interest. After correcting for beam spread (i.e., diffraction), interface phenomena, and equipment amplification settings, any remaining signal differences are assumed to be due to attenuation thus allowing the attenuation coefficient (say, in dB of loss per inch of travel) to be estimated. We begin with a brief overview of our approach, and then discuss how diffraction corrections were determined for our two 1.6 GHz GPR antennas. We then present results of attenuation measurements for two types of concrete using both pulse/echo and pitch/catch measurement setups.

  7. Reflective optics

    CERN Document Server

    Korsch, Dietrich

    1991-01-01

    This is the first book dedicated exclusively to all-reflective imaging systems. It is a teaching tool as well as a practical design tool for anyone who specializes in optics, particularly for those interested in telescopes, infrared, and grazing-incidence systems. The first part of the book describes a unified geometric optical theory of all-reflective imaging systems (from near-normal to grazing incidence) developed from basic principles. The second part discusses correction methods and a multitude of closed-form solutions of well-corrected systems, supplemented with many conventional and unc

  8. Reflective equilibrium

    NARCIS (Netherlands)

    van der Burg, W.; van Willigenburg, T.

    1998-01-01

    The basic idea of reflective equilibrium, as a method for theory construction and decision making in ethics, is that we should bring together a broad variety of moral and non-moral beliefs and, through a process of critical scrutiny and mutual adjustment, combine these into one coherent belief syste

  9. Ultrasonic attenuation in pearlitic steel.

    Science.gov (United States)

    Du, Hualong; Turner, Joseph A

    2014-03-01

    Expressions for the attenuation coefficients of longitudinal and transverse ultrasonic waves are developed for steel with pearlitic microstructure. This type of lamellar duplex microstructure influences attenuation because of the lamellar spacing. In addition, longitudinal attenuation measurements were conducted using an unfocused transducer with 10 MHz central frequency on the cross section of a quenched railroad wheel sample. The dependence of longitudinal attenuation on the pearlite microstructure is observed from the changes of longitudinal attenuation from the quenched tread surface to deeper locations. The results show that the attenuation value is lowest and relatively constant within the quench depth, then increases linearly. The experimental results demonstrate a reasonable agreement with results from the theoretical model. Ultrasonic attenuation provides an important non-destructive method to evaluate duplex microstructure within grains which can be implemented for quality control in conjunction with other manufacturing processes.

  10. An empirical method to estimate the viscosity of mineral oil by means of ultrasonic attenuation.

    Science.gov (United States)

    Ju, Hyeong; Gottlieb, Emanuel; Augenstein, Donald; Brown, Gregor; Tittmann, Bernhard

    2010-07-01

    This paper presents an empirical method for measuring the viscosity of mineral oil. In a built-in pipeline application, conventional ultrasonic methods using shear reflectance or rheological and acoustical phenomena may fail because of attenuated shear wave propagation and an unpredictable spreading loss caused by protective housings and comparable main flows. The empirical method utilizing longitudinal waves eliminates the unknown spreading loss from attenuation measurements on the object fluid by removing the normalized spreading loss per focal length with the measurement of a reference fluid of a known acoustic absorption coefficient. The ultrasonic attenuation of fresh water as the reference fluid and mineral oil as the object fluid were measured along with the sound speed and effective frequency. The empirical equation for the spreading loss in the reference fluid is determined by high-order polynomial fitting. To estimate the shear viscosity of the mineral oil, a linear fit is applied to the total loss difference between the two fluids, whose slope (the absorption coefficient) is combined with an assumed shear-to-volume viscosity relation. The empirical method predicted the viscosities of two types of the mineral oil with a maximum statistical uncertainty of 8.8% and a maximum systematic error of 12.5% compared with directly measured viscosity using a glass-type viscometer. The validity of this method was examined by comparison with the results from theoretical far-field spreading.

  11. Comparison between ATR-IR, Raman, concatenated ATR-IR and Raman spectroscopy for the determination of total antioxidant capacity and total phenolic content of Chinese rice wine.

    Science.gov (United States)

    Wu, Zhengzong; Xu, Enbo; Long, Jie; Pan, Xiaowei; Xu, Xueming; Jin, Zhengyu; Jiao, Aiquan

    2016-03-01

    The application of attenuated total reflectance infrared spectroscopy (ATR-IR), Raman spectroscopy (RS) and combination of ATR-IR and RS for measurements of total antioxidant capacity (TAC) and total phenolic content (TPC) of Chinese rice wine (CRW) were investigated in this study. Synergy interval partial least-squares (SiPLS), support vector machine (SVM) and principal component analysis (PCA) were applied to process the merged data from two individual instruments. It was observed that the performances of models based on the RS spectra were better than those based on the ATR-IR spectra. In addition, SVM models based on the efficient information extracted from ATR-IR and RS spectra were superior to PLS models based on the same information and PLS models based on ATR-IR or RS spectra. The overall results demonstrated that integrating ATR-IR and RS was possible and could improve the prediction accuracy of TAC and TPC in CRWs.

  12. Total Thyroidectomy

    Directory of Open Access Journals (Sweden)

    Lopez Moris E

    2016-06-01

    Full Text Available Total thyroidectomy is a surgery that removes all the thyroid tissue from the patient. The suspect of cancer in a thyroid nodule is the most frequent indication and it is presume when previous fine needle puncture is positive or a goiter has significant volume increase or symptomes. Less frequent indications are hyperthyroidism when it is refractory to treatment with Iodine 131 or it is contraindicated, and in cases of symptomatic thyroiditis. The thyroid gland has an important anatomic relation whith the inferior laryngeal nerve and the parathyroid glands, for this reason it is imperative to perform extremely meticulous dissection to recognize each one of these elements and ensure their preservation. It is also essential to maintain strict hemostasis, in order to avoid any postoperative bleeding that could lead to a suffocating neck hematoma, feared complication that represents a surgical emergency and endangers the patient’s life.It is essential to run a formal technique, without skipping steps, and maintain prudence and patience that should rule any surgical act.

  13. 弹性固体和充满两种互不相溶粘性流体的多孔固体之间界面的反射和折射及其衰减波%Reflection and Refraction of Attenuated Waves at the Boundary of an Elastic Solid With a Porous Solid Saturated With Two Immiscible Viscous Fluids

    Institute of Scientific and Technical Information of China (English)

    M·库玛; R·塞尼; 黄雅意

    2012-01-01

    在充满两种互不相溶粘性流体的多孔固体中,研究弹性波的传播.用3个数性的势函数描述3个纵波的传播,用1个矢性的势函数单独描述横波的传播.根据这些势函数,在不同的组合相中,定义出质点的位移.可以看出,可能存在3个纵波和1个横波.在一个弹性固体半空间与一个充满两种互不相溶粘性流体的多孔固体半空间之间,研究其界面上入射纵波和横波所引起的反射和折射现象.由于孔隙流体中有粘性,折射到多孔介质中的波,朝垂直界面方向偏离.将入射波引起的反射波和折射波的波幅比,作为非奇异的线性代数方程组计算.进一步通过这些波幅比,计算出各个被离散波在入射波能量中所占的份额.通过一个特殊的数值模型,计算出波幅比和能量比系数随入射角的变化.超过SV波的临界入射角,反射波P将不再出现.越过界面的能量守恒原理得到了验证.绘出了图形并对不同孔隙饱和度以及频率的变化,讨论它们对能量分配的影响.%The propagation of elastic waves was studied in a porous solid saturated with two immiscible viscous fluids.The propagation of three longitudinal waves was represented through three scalar potential functions and a vector potential function represents the lone transverse wave.Displacements of particles in different phases of the aggregate were defined in terms of these potentials functions.It was shown that there could exist three longitudinal waves and one transverse wave.The phenomenon of reflection and refraction due to longitudinal and transverse wave at a plane interface between an elastic solid half-space and a porous solid half-space saturated with two immiscible viscous fluids were investigated.For the presence of viscosity in pore-fluids,the waves refracted to porous medium attenuated in the direction normal to the interface.The ratios of amplitudes of reflected and refracted waves with that of the

  14. Inspiring Reflections

    DEFF Research Database (Denmark)

    Muchie, Mammo

    2011-01-01

    A numberof Chris Freeman's colleagues were asked to reflect on what they thought describes his life and work in a few words. Some of the colleagues replied including former SPRU students that were taught or supervised by Chris Freeman. Their views on what they thought were Chris Freeman's defining...... life is not free from fluctuations, cycles, disruptions, crises and destructions both human and ecological. Innovation research ought to position itself to address environmental, financial and economic crises. The third is innovation research for development by addressing not only poverty erdaication...

  15. Monte Carlo simulation of diffuse attenuation coefficient in presence of non uniform profiles

    Digital Repository Service at National Institute of Oceanography (India)

    Desa, E.S; Desai, R.G.P.; Desa, B.A

    This paper presents a Monte Carlo simulation of the vertical depth structure of the downward attenuation coefficient (K sub(d)), and the irradiance reflectance (R) for a given profile of chlorophyll. The results are in quantitaive agreement...

  16. Estimation of compressional seismic wave attenuation of carbonate rocks in Abu Dhabi, United Arab Emirates

    Science.gov (United States)

    Bouchaala, Fateh; Ali, Mohammed Y.; Farid, Asam

    2014-07-01

    The subsurface geology of Abu Dhabi in the United Arab Emirates is primarily composed of carbonate rocks. Such media are known to be highly heterogeneous. Very few studies have attempted to estimate attenuation in carbonate rocks. In Abu Dhabi no attenuation profile has been published. This study provides the first seismic wave attenuation profiles in Abu Dhabi using dense array of VSP data. We estimated three attenuation profiles: the apparent, the scattering, and the intrinsic attenuations. The apparent attenuation profile was computed using amplitude decay and spectral-ratio methods. The scattering attenuation profile was estimated using a generalized reflection-transmission matrix forward model. It is usually estimated from the sonic log, but to be more consistent with the apparent attenuation, we succeeded in this paper to estimate it from the VSP data. We subtracted the scattering attenuation from the apparent attenuation to deduce the intrinsic attenuation. The results of the study indicate that the scattering attenuation is significant compared to the published studies that are mainly based on clastic rocks. The high scattering attenuation can reach up to 0.02. It can be explained by the strong heterogeneity of the carbonate rocks. This study demonstrates that the Simsima and Rus Formations have considerable scattering and intrinsic attenuations. These formations are considered aquifers in Abu Dhabi; we therefore interpreted this high intrinsic attenuation zones to be due to the heterogeneity and to the fluids contained in these formations. The Umm-Er-Radhuma Formation is a more homogenous formation with limited aquifer potential. Hence, scattering and intrinsic attenuations of the Umm-Er-Radhuma Formation are low.

  17. Geophysical imaging of subsurface structures in volcanic area by seismic attenuation profiling

    Science.gov (United States)

    Tsuru, Tetsuro; No, Tetsuo; Fujie, Gou

    2017-01-01

    Geophysical imaging by using attenuation property of multichannel seismic reflection data was tested to map spatial variation of physical properties of rocks in a volcanic area. The study area is located around Miyakejima volcanic island, where an intensive earthquake swarm was observed associated with 2000 Miyakejima eruption. Seismic reflection survey was conducted five months after the swarm initiation in order to clarify crustal structure around the hypocenters of the swarm activity. However, the resulting seismic reflection profiles were unable to provide significant information of deep structures around the hypocenters. The authors newly applied a seismic attribute method that focused seismic attenuation instead of reflectivity to the volcanic area, and designed this paper to assess the applicability of this method to subsurface structural studies in poorly reflective volcanic areas. Resulting seismic attenuation profiles successfully figured out attenuation structures around the Miyakejima volcanic island. Interestingly, a remarkable high-attenuation zone was detected between Miyakejima and Kozushima islands, being well correlated with the hypocenter distribution of the earthquake swarm in 2000. The high-attenuation zone is interpreted as a fractured area that was developed by magma activity responsible for the earthquake swarms that have been repeatedly occurring there. The present study can be one example showing the applicability of seismic attenuation profiling in a volcanic area. [Figure not available: see fulltext. Caption: .

  18. On Reflection

    DEFF Research Database (Denmark)

    Blasco, Maribel

    2012-01-01

    This article explores how the concept of reflexivity is used in intercultural education. Reflexivity is often presented as a key learning goal in acquiring intercultural competence (ICC). Yet, reflexivity can be defined in different ways, and take different forms across time and space, depending...... in designing learning objectives in intercultural education and in devising ways to attain them. Greater attention is also needed in intercultural education to the ways in which selfhood, and hence also reflexivity and constructions of difference, differ across space and time....... on the concepts of selfhood that prevail and how notions of difference are constructed. First, I discuss how the dominant usages of reflexivity in intercultural education reflect and reproduce a Cartesian view of the self that shapes how ICC is conceptualized and taught. I discuss three assumptions that this view...

  19. An acoustic eikonal equation for attenuating transversely isotropic media with a vertical symmetry axis

    KAUST Repository

    Hao, Qi

    2016-11-21

    Seismic-wave attenuation is an important component of describing wave propagation. Certain regions, such as gas clouds inside the earth, exert highly localized attenuation. In fact, the anisotropic nature of the earth induces anisotropic attenuation because the quasi P-wave dispersion effect should be profound along the symmetry direction. We have developed a 2D acoustic eikonal equation governing the complex-valued traveltime of quasi P-waves in attenuating, transversely isotropic media with a vertical-symmetry axis (VTI). This equation is derived under the assumption that the complex-valued traveltime of quasi P-waves in attenuating VTI media are independent of the S-wave velocity parameter υS0 in Thomsen\\'s notation and the S-wave attenuation coefficient AS0 in Zhu and Tsvankin\\'s notation. We combine perturbation theory and Shanks transform to develop practical approximations to the acoustic attenuating eikonal equation, capable of admitting an analytical description of the attenuation in homogeneous media. For a horizontal-attenuating VTI layer, we also derive the nonhyperbolic approximations for the real and imaginary parts of the complex-valued reflection traveltime. These equations reveal that (1) the quasi SV-wave velocity and the corresponding quasi SV-wave attenuation coefficient given as part of Thomsen-type notation barely affect the ray velocity and ray attenuation of quasi P-waves in attenuating VTI media; (2) combining the perturbation method and Shanks transform provides an accurate analytic eikonal solution for homogeneous attenuating VTI media; (3) for a horizontal attenuating VTI layer with weak attenuation, the real part of the complex-valued reflection traveltime may still be described by the existing nonhyperbolic approximations developed for nonattenuating VTI media, and the imaginary part of the complex-valued reflection traveltime still has the shape of nonhyperbolic curves. In addition, we have evaluated the possible extension of the

  20. Heat radiative characteristics of ultra-attenuated materials

    Institute of Scientific and Technical Information of China (English)

    Dehong Xia; Yonghong Wu

    2004-01-01

    From the microstructure of heat radiation, the interaction between the incident heat radiative wave and the electromagnetism syntonic wave is analyzed to reveal the emission, absorption, transmission and reflection mechanisms of the incident heat radiative wave in materials. Based on Lorentz dispersion theory, the effect of optical parameters on heat radiative characteristics is also analyzed. The method of ultra-attenuation and nanocrystallization improving the heat radiative characteristics of the material and the emissivity dispersion of the ultra-attenuated materials are brought to light.

  1. The influence of the Goos-Hänchen effect on seismic data processing and AVO in attenuating media

    Science.gov (United States)

    Wang, Zhiyong

    2015-11-01

    The Goos-Hänchen (GH) effect induced by the total reflection of an incident beam of P-wave from a low-impedance medium to a high-impedance medium at near- and post-critical angles was theoretically simulated and discussed. For both PP- and PSV-waves, there may be large GH shifts (GHS) and penetration depths (PD) for both lossless and attenuating media. As the Q-factor increases, or the frequency of the seismic wave decreases, the GH effect is increased. However, in attenuating media, there may be non-zero GHS and PD at all non-zero incident angles, not just post-critical angles. GHS may be either positive or negative, while PD is positive only. Compared to the Q-factor in the incident medium, the Q-factor in the transmission medium may play a more dominant role in the determination of reflection coefficients, GHS, and PD. The GH-induced normal moveout (NMO) discrepancy of the PSV-wave may be larger than that of the PP-wave. Due to the GH effect, there may be an angle discrepancy (at fixed offset) between the GH-modified incident angle and the traditional incident angle. In addition, the GH effect at a given offset may produce two or three reflected waves, from different incident angles. These results suggest that, within their assumptions, the GH effect may lead to errors in NMO estimates and the vertical location of the reflector. Furthermore, there may be errors in offsets, incident angles, and reflection amplitudes, in the analyses of the amplitude variation with offset (AVO). These GH effects might be more important for seismic data at fixed offsets and shallow layers, and for sonic log data, which might fall into the post-critical angle regime. Therefore, there may be a necessity to take into account the GH effect in the interpretation of wide-angle reflection data in NMO and AVO analyses.

  2. Totaleindruck o impresión total: La Telésfora de Aquinas Ried como proyecto político, creación literario-musical, reflejo personal y encuentro con el otro Totaleindruck or total impression: Aquinas Ried's Telésfora as a Political Project, a Literary and Musical Creation, a Personal Reflection and an Encounter with the Others

    Directory of Open Access Journals (Sweden)

    José Manuel Izquierdo König

    2011-06-01

    Full Text Available La Telésfora (1847, ópera en tres actos de Aquinas Ried, se ha instalado desde los trabajos de Eugenio Pereira Salas, como el primer drama lírico escrito en suelo chileno. El presente ensayo busca discutir esta consideración a partir del único elemento que le sobrevive: su libreto. A partir del mismo, la obra de Ried se revela como un proyecto político concreto, un reflejo personal de sus ideas y su encuentro con los chilenos, alemanes y mapuches de mediados del siglo XIX. En este sentido, la figura de Aquinas Ried se amplía a todo un espectro de la vida musical y cosmopolita de la ciudad de Valparaíso y los inmigrantes en Chile.Telésfora (1847 is a three-act opera written by Aquinas Ried. Since the epoch of the Chilean music historian Eugenio Pereira Salas this work has been considered as the first lyrical drama composed in the Chilean territory after the independence. The following essay discusses this point in depth on the basis of the libretto, which is the only element of this opera that has remained. The libretto reveals a concrete political project as well as a personal reflection on Ried's ideas along with his encounter with Chileans, Germans and indigenous people of the nineteenth century. In this regard, the figure of Aquinas Ried reaches a wider spectrum encompassing the musical and cosmopolitan life of the city of Valparaiso and the immigrants in 19th-century Chile.

  3. Correction for hydrometeor attenuation of C band radar data

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    C band digital weather radar observed data, collected from the Huaihe River Basin Energy and Water Cycle Experiment (HUBEX), are used for the study of correction of hydrometeor attenuation in the Fuyang region. An iterative algorithm is used for the correction scheme. The preliminary study shows that there may be a big difference between the radar observed reflectivity and the corresponding corrected one. Based upon the hourly precipitation data derived by the radar data sampled from the observations at intervals of 10 min and rain-gauge-recorded hourly precipitation data, it is found that the attenuation correction algorithm gives better results than those from the direct observation. It is also shown that the temperature of hydrometeors may strongly affect the results derived from the attenuation algorithm.

  4. Semiactive control for vibration attenuation

    Energy Technology Data Exchange (ETDEWEB)

    Leitmann, G. [Univ. of California, Berkeley, CA (United States). Coll. of Engineering

    1994-12-31

    With the advent of materials, such as electrorheological fluids, whose material properties can be altered rapidly by means of external stimuli, employing such materials as actuators for the controlled attenuation of undesirable vibrations is now possible. Such control schemes are dubbed semiactive in that they attenuate vibrations whether applied actively or passively. The author investigates various such control schemes, allowing for both separate and joint control of the stiffness and damping characteristics of the material.

  5. The new approach of polarimetric attenuation correction for improving radar quantitative precipitation estimation(QPE)

    Science.gov (United States)

    Gu, Ji-Young; Suk, Mi-Kyung; Nam, Kyung-Yeub; Ko, Jeong-Seok; Ryzhkov, Alexander

    2016-04-01

    To obtain high-quality radar quantitative precipitation estimation data, reliable radar calibration and efficient attenuation correction are very important. Because microwave radiation at shorter wavelength experiences strong attenuation in precipitation, accounting for this attenuation is the essential work at shorter wavelength radar. In this study, the performance of different attenuation/differential attenuation correction schemes at C band is tested for two strong rain events which occurred in central Oklahoma. And also, a new attenuation correction scheme (combination of self-consistency and hot-spot concept methodology) that separates relative contributions of strong convective cells and the rest of the storm to the path-integrated total and differential attenuation is among the algorithms explored. A quantitative use of weather radar measurement such as rainfall estimation relies on the reliable attenuation correction. We examined the impact of attenuation correction on estimates of rainfall in heavy rain events by using cross-checking with S-band radar measurements which are much less affected by attenuation and compared the storm rain totals obtained from the corrected Z and KDP and rain gages in these cases. This new approach can be utilized at shorter wavelength radars efficiently. Therefore, it is very useful to Weather Radar Center of Korea Meteorological Administration preparing X-band research dual Pol radar network.

  6. Hollow optical-fiber based infrared spectroscopy for measurement of blood glucose level by using multi-reflection prism.

    Science.gov (United States)

    Kino, Saiko; Omori, Suguru; Katagiri, Takashi; Matsuura, Yuji

    2016-02-01

    A mid-infrared attenuated total reflection (ATR) spectroscopy system employing hollow optical fibers and a trapezoidal multi-reflection ATR prism has been developed to measure blood glucose levels. Using a multi-reflection prism brought about higher sensitivity, and the flat and wide contact surface of the prism resulted in higher measurement reproducibility. An analysis of in vivo measurements of human inner lip mucosa revealed clear signatures of glucose in the difference spectra between ones taken during the fasting state and ones taken after ingestion of glucose solutions. A calibration plot based on the absorption peak at 1155 cm(-1) that originates from the pyranose ring structure of glucose gave measurement errors less than 20%.

  7. Blood glucose measurement in vivo using hollow-fiber based, mid-infrared ATR probe with multi-reflection prism

    Science.gov (United States)

    Kino, Saiko; Omori, Suguru; Matsuura, Yuji

    2016-03-01

    An attenuated-total-reflection (ATR), mid-infrared spectroscopy system that consists of hollow optical fibers, a trapezoidal multi-reflection ATR prism, and a conventional FT-IR spectrometer has been developed to measure blood glucose levels. Owing to the low transmission loss and high flexibility of the hollow-optical fiber, the system can measure any sites of the human body where blood capillaries are close to the surface of mucosa, such as inner lips. Using a multi-reflection prism brought about higher sensitivity, and the flat and wide contact surface of the prism resulted in higher measurement reproducibility. The results of in-vivo measurement of human inner lips showed the feasibility of the proposed system, and the measurement errors were within 20%.

  8. X-ray total reflection mirrors for coherent illumination

    CERN Document Server

    Ishikawa, T; Yabashi, M; Souvorov, A; Yamauchi, K; Yamamura, K; Mimura, H; Saito, A; Mori, Y

    2002-01-01

    X-ray mirrors for coherent illumination demand much higher surface quality than is achievable with the conventional polishing techniques. Plasma chemical vaporization machining (CVM) and elastic emission machining (EEM) have been applied for x-ray mirror manufacturing. Figure error of a flat silicon single crystal mirrors made with CVM+EEM process was reduced to 2.0 nm peak-to-valley and 0.2 nm RMS. The machining process was also applied to make elliptical mirrors. One-dimensional focusing with a single elliptical mirror showed diffraction-limited properties with the focal width of 200 nm. Two-dimensional focusing with Kirkpatric-Baez configuration gave a focal spot size of 200 nm x 200 nm. (author)

  9. An ice-sheet-wide framework for englacial attenuation from ice-penetrating radar data

    Science.gov (United States)

    Jordan, T. M.; Bamber, J. L.; Williams, C. N.; Paden, J. D.; Siegert, M. J.; Huybrechts, P.; Gagliardini, O.; Gillet-Chaulet, F.

    2016-07-01

    Radar inference of the bulk properties of glacier beds, most notably identifying basal melting, is, in general, derived from the basal reflection coefficient. On the scale of an ice sheet, unambiguous determination of basal reflection is primarily limited by uncertainty in the englacial attenuation of the radio wave, which is an Arrhenius function of temperature. Existing bed-returned power algorithms for deriving attenuation assume that the attenuation rate is regionally constant, which is not feasible at an ice-sheet-wide scale. Here we introduce a new semi-empirical framework for deriving englacial attenuation, and, to demonstrate its efficacy, we apply it to the Greenland Ice Sheet. A central feature is the use of a prior Arrhenius temperature model to estimate the spatial variation in englacial attenuation as a first guess input for the radar algorithm. We demonstrate regions of solution convergence for two input temperature fields and for independently analysed field campaigns. The coverage achieved is a trade-off with uncertainty and we propose that the algorithm can be "tuned" for discrimination of basal melt (attenuation loss uncertainty ˜ 5 dB). This is supported by our physically realistic ( ˜ 20 dB) range for the basal reflection coefficient. Finally, we show that the attenuation solution can be used to predict the temperature bias of thermomechanical ice sheet models and is in agreement with known model temperature biases at the Dye 3 ice core.

  10. Characterizing Dust Attenuation in Local Star Forming Galaxies

    Science.gov (United States)

    Battisti, Andrew; Calzetti, Daniela; Chary, Ranga-Ram

    2017-01-01

    The dust attenuation for a sample of ~10000 local (z ≤ 0.1) star forming galaxies is constrained as a function of their physical properties. We utilize aperture-matched multi-wavelength data from the UV-to-NIR, available from the Galaxy Evolution Explorer, the Sloan Digital Sky Survey, the United Kingdom Infrared Telescope, and the Two Micron All-Sky Survey, to ensure that regions of comparable size in each galaxy are being analyzed. We characterize the dust attenuation through the slope of the UV flux density and the Balmer decrement (Hα/Hβ). The observed relationship between these quantities is similar to the local starburst relation and is not seen to vary strongly with galactic properties. We derive the total attenuation curve over the range 1250 Å < λ < 28500 Å and find that a single attenuation curve is effective for characterizing the majority of galaxies in our sample. This attenuation curve is slightly lower in the far-UV than local starburst galaxies, by roughly 15%, but appears similar at longer wavelengths and has a normalization of RV = 3.7±0.4 (V-band). This indicates that a single attenuation curve is reasonable for wide application in the local Universe.

  11. Design and performance analysis of total reflection-type secondary optics in concentrated photovoltaic module%应用于聚光光伏模组的全反射式二次聚光器的设计与性能分析

    Institute of Scientific and Technical Information of China (English)

    茹占强; 安志勇; 宋贺伦; 李望; 卢鑫; 于秋水; 张耀辉

    2011-01-01

    当前聚光光伏系统存在很多问题,比如跟踪器的跟踪精度偏低、聚焦光斑强度分布不均匀、聚焦光斑的形状跟太阳电池不匹配等,二次聚光器可以解决这些问题,从而提高高倍聚光光伏系统的光电转换效率.对高倍聚光光伏系统中的菲涅耳透镜和二次聚光器的聚光原理进行了简要分析,重点对全反射式二次聚光器进行了二维聚光的理论分析,并配合非成像光学的光线追迹方法,设计并加工了应用于某高倍聚光光伏系统的全反射式二次聚光器.对该二次聚光器的主要性能进行了仿真分析及评价,结果表明:该聚光器能提高高倍聚光光伏系统的整体性能.%At present, the high concentrated photovoltaic system has a lot of problems, for example,tracking accuracy of tracker is too low, focused spot irradiation distribution is ununiform, the shape of focused spot is different from the shape of solar cell, and so on.Secondary optics can improve the photoelectric conversion efficiency of the high concentrated photovoltaic system by solving these problems.The condensation principles of Fresnel lens and secondary optics were analyzed, in particularly twodimensional condensation theory about the total reflection-type secondary optics was analyzed.According to the results of theoretical analysis and the approach of ray trace of nonimaging optics, the total reflection-type secondary optics used in a high concentrated photovoltaic system was designed and processed.And some main performance of the secondary optics were analyzed and evaluated by simulation software.The conclusion is drawn that the total reflection-type secondary optics can improve the whole performance of the high concentrated photovoltaic system.

  12. An analytical two-flow model to simulate the distribution of irradiance in coastal waters with a wind-roughed surface and bottom reflectance

    Science.gov (United States)

    Ma, Wei-Ming

    1997-06-01

    An analytical two-flow model is derived from the radiative transfer equation to simulate the distribution of irradiance in coastal waters with a wind-roughed surface and bottom reflectance. The model utilizes unique boundary conditions, including the surface slope of the downwelling and upwelling irradiance as well as the influence of wind and bottom reflectance on simulated surface reflectance. The developed model provides a simple mathematical concept for understanding the irradiant light flux and associated processes in coastal or fresh water as well as turbid estuarine waters. The model is applied to data from the Banana River and coastal Atlantic Ocean water off the east coast of central Florida, USA. The two-flow irradiance model is capable of simulating realistic above-surface reflectance signatures under wind-roughened air-water surface given realistic input parameters including a specular flux conversion coefficient, absorption coefficient, backscattering coefficient, atmospheric visibility, bottom reflectance, and water depth. The root-mean-squared error of the calculated above-surface reflectances is approximately 3% in the Banana River and is less than 15% in coastal Atlantic Ocean off the east of Florida. Result of the subsurface reflectance sensitivity analysis indicates that the specular conversion coefficient is the most sensitive parameter in the model, followed by the beam attenuation coefficient, absorption coefficient, water depth, backscattering coefficient, specular irradiance, diffuse irradiance, bottom reflectance, and wind speed. On the other hand, result of the above-surface reflectance sensitivity analysis indicates that the wind speed is the most important parameter, followed by bottom reflectance, attenuation coefficient, water depth, conversion coefficient, specular irradiance, downwelling irradiance, absorption coefficient, and backscattering coefficient. Model results depend on the accuracy of these parameters to a large degree and

  13. Photoacoustic Imaging Taking into Account Attenuation

    CERN Document Server

    Kowar, Richard

    2010-01-01

    First, we review existing attenuation models and discuss their causality properties, which we believe to be essential for algorithms for inversion with attenuated data. Then, we survey causality properties of common attenuation models. We also derive integro-differential equations which the attenuated waves are satisfying. In addition we discuss the ill--conditionness of the inverse problem for calculating the unattenuated wave from the attenuated one.

  14. Attenuation in Superconducting Circular Waveguides

    Directory of Open Access Journals (Sweden)

    K. H. Yeap

    2016-09-01

    Full Text Available We present an analysis on wave propagation in superconducting circular waveguides. In order to account for the presence of quasiparticles in the intragap states of a superconductor, we employ the characteristic equation derived from the extended Mattis-Bardeen theory to compute the values of the complex conductivity. To calculate the attenuation in a circular waveguide, the tangential fields at the boundary of the wall are first matched with the electrical properties (which includes the complex conductivity of the wall material. The matching of fields with the electrical properties results in a set of transcendental equations which is able to accurately describe the propagation constant of the fields. Our results show that although the attenuation in the superconducting waveguide above cutoff (but below the gap frequency is finite, it is considerably lower than that in a normal waveguide. Above the gap frequency, however, the attenuation in the superconducting waveguide increases sharply. The attenuation eventually surpasses that in a normal waveguide. As frequency increases above the gap frequency, Cooper pairs break into quasiparticles. Hence, we attribute the sharp rise in attenuation to the increase in random collision of the quasiparticles with the lattice structure.

  15. Krill oil attenuates left ventricular dilatation after myocardial infarction in rats

    Directory of Open Access Journals (Sweden)

    Fosshaug Linn E

    2011-12-01

    Full Text Available Abstract Background In the western world, heart failure (HF is one of the most important causes of cardiovascular mortality. Supplement with n-3 polyunsaturated fatty acids (PUFA has been shown to improve cardiac function in HF and to decrease mortality after myocardial infarction (MI. The molecular structure and composition of n-3 PUFA varies between different marine sources and this may be of importance for their biological effects. Krill oil, unlike fish oil supplements, contains the major part of the n-3 PUFA in the form of phospholipids. This study investigated effects of krill oil on cardiac remodeling after experimental MI. Rats were randomised to pre-treatment with krill oil or control feed 14 days before induction of MI. Seven days post-MI, the rats were examined with echocardiography and rats in the control group were further randomised to continued control feed or krill oil feed for 7 weeks before re-examination with echocardiography and euthanization. Results The echocardiographic evaluation showed significant attenuation of LV dilatation in the group pretreated with krill oil compared to controls. Attenuated heart weight, lung weight, and levels of mRNA encoding classical markers of LV stress, matrix remodeling and inflammation reflected these findings. The total composition of fatty acids were examined in the left ventricular (LV tissue and all rats treated with krill oil showed a significantly higher proportion of n-3 PUFA in the LV tissue, although no difference was seen between the two krill oil groups. Conclusions Supplement with krill oil leads to a proportional increase of n-3 PUFA in myocardial tissue and supplement given before induction of MI attenuates LV remodeling.

  16. 固-液有限周期声子晶体全反射隧穿效应的解析理论%Analytical Theory of the Total Reflection Tunnel Effect of Solid-liquid Limited Periodic Phononic Crystal

    Institute of Scientific and Technical Information of China (English)

    刘启能; 刘沁

    2012-01-01

    In order to obtain analytic theory of 1D solid-liquid limited cycle phononic crystal, the evanescent wave and the beam interference theory are used. The physical mechanism of the total reflection tunnel effect of 1D solid-liquid limited cycle phononic crystal is explained and the analytical formulas is deduced. The change rule of the total reflection tunnel effect that response curves of wavelength versus cycle number and cycle wave distance are studied. Transmission matrix method and analytical method is compared and their results are the same, it makes up the deficiency of the numerical calculation method of 1D limited cycle phononic crystal.%利用倏逝波的概念和多波束干涉理论解释了一维固-液结构有限周期声子晶体全反射隧穿效应产生的原因,并推导出全反射隧穿峰带的波长满足的解析公式.得出了一维固-液结构有限周期声子晶体全反射隧穿峰带的波长随周期数以及周期波程的变化规律,这些结论与转移矩阵法的结论吻合,弥补了一维有限周期声子晶体研究中数值计算方法的不足.

  17. 沙苑子总黄酮通过抑制内质网应激和JNK通路过度活化减轻百草枯中毒大鼠肺损伤%Total flavonoids from astragalus complanatus attenuates lung injury following paraquat poisoning in rats through inhibiting excessive endoplasmic reticulum stress and c-Jun N-terminal kinase pathway

    Institute of Scientific and Technical Information of China (English)

    张志坚; 董瑶瑶; 李晓萍; 彭礼波

    2014-01-01

    目的 探讨沙苑子总黄酮(FAC)是否可通过抑制内质网应激和c-Jun氨基末端激酶(JNK)通路过度活化来减轻大鼠百草枯诱导的肺损伤.方法 48只SD大鼠按随机数字表法分为对照组、模型组、二甲基亚砜(DMSO)对照组和FAC低、中、高剂量组6组,每组8只.模型组采用PQ 80 mg/kg灌胃诱导肺损伤;对照组则给予等量生理盐水灌胃;DMSO组于PQ灌胃前2h腹腔注射10% DMSO 20 mL/kg;FAC低、中、高剂量组于PQ灌胃后腹腔注射40、80、160 mg· kg-1· d-1的FAC溶液.制模后72 h处死大鼠取肺,检测肺湿/干质量(W/D)比值、总肺水含量(TLW);光镜下观察肺组织病理学改变,并进行肺组织损伤评估;逆转录-聚合酶链反应(RT-PCR)检测肺组织JNK和葡萄糖调节蛋白78(GRP78)的mRNA表达;蛋白质免疫印迹试验(Western Blot)检测肺组织JNK、磷酸化JNK(p-JNK)和GRP78的蛋白表达.结果 与对照组比较,模型组和DMSO组肺W/D比值、TLW、肺泡损伤定量评估指数(IQA)均明显升高,JNK、GRP78的mRNA表达和JNK、p-JNK、GRP78的蛋白表达均明显升高.与模型组比较,FAC各剂量组肺W/D比值、TLW、IQA以及JNK mRNA表达和p-JNK蛋白表达均明显下降,其中以FAC高剂量组降低最为显著[肺W/D比值:3.0±0.3比5.5±0.5,TLW:2.2±0.3比4.7±0.4,IQA:(15.4±3.0)%比(40.0±5.7)%,JNK mRNA:0.21 ±0.08比0.82±0.27,p-JNK蛋白:0.31±0.09比0.78±0.25,均P<0.01];FAC低、中、高剂量组GRP78 mRNA和JNK、GRP78蛋白均为高表达,与模型组比较差异均无统计学意义(GRP78 mRNA:0.54±0.18比0.74±0.20,JNK蛋白:0.76±0.27比0.80±0.28,GRP78蛋白:0.51 ±0.18比0.69±0.21,均P>0.05).结论 百草枯中毒后肺组织发生了过度的内质网应激损伤;FAC可能通过抑制内质网应激及JNK信号通路过度活化起到保护肺组织的作用.%Objective To investigate the effect of total flavonoids from astragalus complanatus (FAC) on attenuating lung injury resulted from paraquat (PQ

  18. On the Attenuation of Neutrons and Photons in a Duct Filled with a Helical Plug

    Energy Technology Data Exchange (ETDEWEB)

    Aalto, E.; Krell, Aa.

    1966-12-15

    Neutron and gamma ray attenuation has been studied in a cylindrical duct, length/diam. ratio 7, partly (36 vol.%) filled by a helical (screw-like) plug with adjustable number of turns. The total neutron leakage through the duct decreased by a factor of six from zero to 0.5 turn, and by an additional factor of three from 0.5 to 2 turns (saturation value). The leakage with less than 0.5 turn is governed by fast flux and above 0.5 turn by epithermal flux. It is observed that the attenuation calculation in a homogenized, infinite material combined with the predicted attenuation in a duct give the measured saturation attenuation. The length coordinates used must be slightly modified in this case. The attenuation of gamma in the saturation case (3 turns) equals that predicted without the duct attenuation in a homogenized infinite material.

  19. X-Ray Attenuation Cell

    Energy Technology Data Exchange (ETDEWEB)

    Ryutov, D.; Toor, A.

    2000-03-03

    To minimize the pulse-to-pulse variation, the LCLS FEL must operate at saturation, i.e. 10 orders of magnitude brighter spectral brilliance than 3rd-generation light sources. At this intensity, ultra-high vacuums and windowless transport are required. Many of the experiments, however, will need to be conducted at a much lower intensity thereby requiring a reliable means to reduce the x-ray intensity by many orders of magnitude without increasing the pulse-to-pulse variation. In this report we consider a possible solution for controlled attenuation of the LCLS x-ray radiation. We suggest using for this purpose a windowless gas-filled cell with the differential pumping. Although this scheme is easily realizable in principle, it has to be demonstrated that the attenuator can be made short enough to be practical and that the gas loads delivered to the vacuum line of sight (LOS) are acceptable. We are not going to present a final, optimized design. Instead, we will provide a preliminary analysis showing that the whole concept is robust and is worth further study. The spatial structure of the LCLS x-ray pulse at the location of the attenuator is shown in Fig. 1. The central high-intensity component, due to the FEL, has a FWHM of {approx}100 {micro}m. A second component, due to the undulator's broad band spontaneous radiation is seen as a much lower intensity ''halo'' with a FWHM of 1 mm. We discuss two versions of the attenuation cell. The first is directed towards a controlled attenuation of the FEL up to the 4 orders of magnitude in the intensity, with the spontaneous radiation halo being eliminated by collimators. In the second version, the spontaneous radiation is not sacrificed but the FEL component (as well as the first harmonic of the spontaneous radiation) gets attenuated by a more modest factor up to 100. We will make all the estimates assuming that the gas used in the attenuator is Xenon and that the energy of the FEL is 8.25 keV. At

  20. Radiative Transfer Model of Dust Attenuation Curves in Clumpy, Galactic Environments

    CERN Document Server

    Seon, Kwang-Il

    2016-01-01

    The attenuation of starlight by dust in galactic environments is investigated through models of radiative transfer in a spherical, clumpy ISM. Extinction properties for MW, LMC, and SMC dust types are considered. It is illustrated that the attenuation curves are primarily determined by the wavelength dependence of absorption rather than by the underlying extinction (absorption+scattering) curve. Attenuation curves consistent with the "Calzetti attenuation curve" are found by assuming the silicate-carbonaceous dust model for the MW, but with the 2175A absorption bump suppressed or absent. The discrepancy between our results and previous work that claimed the SMC-type dust to be the most likely origin of the Calzetti curve is ascribed to the difference in adopted albedos; this study uses the theoretically calculated albedos whereas the previous ones adopted empirically derived albedos from observations of reflection nebulae. It is also found that the model attenuation curves calculated with the MW dust are well...

  1. Attenuation in silica-based optical fibers

    DEFF Research Database (Denmark)

    Wandel, Marie Emilie

    2006-01-01

    In this thesis on attenuation in silica based optical fibers results within three main topics are reported. Spectral attenuation measurements on transmission fibers are performed in the wide wavelength range 290 nm – 1700 nm. The measured spectral attenuation is analyzed with special emphasis...... on absorption peaks in order to investigate the cause of an unusual high attenuation in a series of transmission fibers. Strong indications point to Ni2+ in octahedral coordination as being the cause of the high attenuation. The attenuation of fibers having a high core refractive index is analyzed and the cause...... of the high attenuation measured in such fibers is described as being due to scattering of light on fluctuations of the core diameter. A novel semi-empirical model for predicting the attenuation of high index fibers is presented. The model is shown to be able to predict the attenuation of high index fibers...

  2. Characteristics of coda wave attenuation in Yunnan area

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The characteristic of seismic coda wave attenuation in Yunnan area in 7 frequency-bands range from 1 Hz to 20 Hz was estimated by using the local earthquake's waveform data recorded from 22 Yunnan digital seismic stations.Coda attenuation Q-c1 of each station was firstly calculated by single scattering method. Then, mean free path Le and seismic albedo Bo of each station were calculated, and scattering attenuation Q-1s and intrinsic attenuation Q-1i were separated from total attenuation Q-1t by multiple lapse time window analysis based on the multiple scattering model in uniform random isotropic scattering medium. The attenuating characteristics in Yunnan show that most value of Le are in 10~30 km, with maximal within 2~6 Hz;Bo are about 0.5 at 1~2 Hz, but less than 0.5at other frequency-bands, which means Q-1i is comparable with Q-1s at 1~2 Hz, and after 1~2 Hz, Q-1i is greater than Q-1s and dominates the attenuation process. Q-1c is close to Q-1i at other frequency bands except 1~2 Hz.Results show that Q-1 especially Qs-1 varies spatially, Q-1 in eastern Yunnan zone is a bit higher than in northwestern Yunnan zone;northwestern Yunnan zone higher than southwestern Yunnan zone. Comparing with other results in global, Qs-1 in Yunnan is lower than the global average value among these results, Q-1i is higher than the global average value, and Q-1t lies the middle among these results.

  3. Josephson tunnel junction microwave attenuator

    DEFF Research Database (Denmark)

    Koshelets, V. P.; Shitov, S. V.; Shchukin, A. V.

    1993-01-01

    A new element for superconducting electronic circuitry-a variable attenuator-has been proposed, designed, and successfully tested. The principle of operation is based on the change in the microwave impedance of a superconductor-insulator-superconductor (SIS) Josephson tunnel junction when dc bias...

  4. Compact plasmonic variable optical attenuator

    DEFF Research Database (Denmark)

    Leosson, Kristjan; Rosenzveig, Tiberiu; Hermannsson, Pétur Gordon

    2008-01-01

    We demonstrate plasmonic nanowire-based thermo-optic variable optical attenuators operating in the 1525-1625 nm wavelength range. The devices have a footprint as low as 1 mm, extinction ratio exceeding 40 dB, driving voltage below 3 V, and full modulation bandwidth of 1 kHz. The polarization...

  5. Reflectable bases for affine reflection systems

    CERN Document Server

    Azam, Saeid; Yousofzadeh, Malihe

    2011-01-01

    The notion of a "root base" together with its geometry plays a crucial role in the theory of finite and affine Lie theory. However, it is known that such a notion does not exist for the recent generalizations of finite and affine root systems such as extended affine root systems and affine reflection systems. As an alternative, we introduce the notion of a "reflectable base", a minimal subset $\\Pi$ of roots such that the non-isotropic part of the root system can be recovered by reflecting roots of $\\Pi$ relative to the hyperplanes determined by $\\Pi$. We give a full characterization of reflectable bases for tame irreducible affine reflection systems of reduced types, excluding types $E_{6,7,8}$. As a byproduct of our results, we show that if the root system under consideration is locally finite then any reflectable base is an integral base.

  6. Stormwater Attenuation by Green Roofs

    Science.gov (United States)

    Sims, A.; O'Carroll, D. M.; Robinson, C. E.; Smart, C. C.

    2014-12-01

    Innovative municipal stormwater management technologies are urgently required in urban centers. Inadequate stormwater management can lead to excessive flooding, channel erosion, decreased stream baseflows, and degraded water quality. A major source of urban stormwater is unused roof space. Green roofs can be used as a stormwater management tool to reduce roof generated stormwater and generally improve the quality of runoff. With recent legislation in some North American cities, including Toronto, requiring the installation of green roofs on large buildings, research on the effectiveness of green roofs for stormwater management is important. This study aims to assess the hydrologic response of an extensive sedum green roof in London, Ontario, with emphasis on the response to large precipitation events that stress municipal stormwater infrastructure. A green roof rapidly reaches field capacity during large storm events and can show significantly different behavior before and after field capacity. At field capacity a green roof has no capillary storage left for retention of stormwater, but may still be an effective tool to attenuate peak runoff rates by transport through the green roof substrate. The attenuation of green roofs after field capacity is linked to gravity storage, where gravity storage is the water that is temporarily stored and can drain freely over time after field capacity has been established. Stormwater attenuation of a modular experimental green roof is determined from water balance calculations at 1-minute intervals. Data is used to evaluate green roof attenuation and the impact of field capacity on peak flow rates and gravity storage. In addition, a numerical model is used to simulate event based stormwater attenuation. This model is based off of the Richards equation and supporting theory of multiphase flow through porous media.

  7. Inverse scattering and refraction corrected reflection for breast cancer imaging

    Science.gov (United States)

    Wiskin, J.; Borup, D.; Johnson, S.; Berggren, M.; Robinson, D.; Smith, J.; Chen, J.; Parisky, Y.; Klock, John

    2010-03-01

    Reflection ultrasound (US) has been utilized as an adjunct imaging modality for over 30 years. TechniScan, Inc. has developed unique, transmission and concomitant reflection algorithms which are used to reconstruct images from data gathered during a tomographic breast scanning process called Warm Bath Ultrasound (WBU™). The transmission algorithm yields high resolution, 3D, attenuation and speed of sound (SOS) images. The reflection algorithm is based on canonical ray tracing utilizing refraction correction via the SOS and attenuation reconstructions. The refraction correction reflection algorithm allows 360 degree compounding resulting in the reflection image. The requisite data are collected when scanning the entire breast in a 33° C water bath, on average in 8 minutes. This presentation explains how the data are collected and processed by the 3D transmission and reflection imaging mode algorithms. The processing is carried out using two NVIDIA® Tesla™ GPU processors, accessing data on a 4-TeraByte RAID. The WBU™ images are displayed in a DICOM viewer that allows registration of all three modalities. Several representative cases are presented to demonstrate potential diagnostic capability including: a cyst, fibroadenoma, and a carcinoma. WBU™ images (SOS, attenuation, and reflection modalities) are shown along with their respective mammograms and standard ultrasound images. In addition, anatomical studies are shown comparing WBU™ images and MRI images of a cadaver breast. This innovative technology is designed to provide additional tools in the armamentarium for diagnosis of breast disease.

  8. Ferrite attenuator modulation improves antenna performance

    Science.gov (United States)

    Hooks, J. C.; Larson, S. G.; Shorkley, F. H.; Williams, B. T.

    1970-01-01

    Ferrite attenuator inserted into appropriate waveguide reduces the gain of the antenna element which is causing interference. Modulating the ferrite attenuator to change the antenna gain at the receive frequency permits ground tracking until the antenna is no longer needed.

  9. Analysis of multiscale scattering and poroelastic attenuation in a real sedimentary rock sequence

    Science.gov (United States)

    Hackert; Parra

    2000-06-01

    Compressional waves in heterogeneous permeable media experience attenuation from both scattering and induced pore scale flow of the viscous saturating fluid. For a real, finely sampled sedimentary sequence consisting of 255 layers and covering 30 meters of depth, elastic and poroelastic computer models are applied to investigate the relative importance of scattering and fluid-flow attenuation. The computer models incorporate the known porosity, permeability, and elastic properties of the sand/shale sequence in a binary medium, plane layered structure. The modeled elastic scattering attenuation is well described by stochastic medium theory if two-length scale statistics are applied to reflect the relative thickness of the shale layers when compared to the sand layers. Under the poroelastic Biot/squirt flow model, fluid-flow attenuation from the moderate permeability (10(-14) m2) sands may be separated in the frequency domain from the attenuation due to the low permeability (5 x 10(-17) m2) shale layers. Based on these models, the overall attenuation is well approximated by the sum of the scattering attenuation from stochastic medium theory and the volume weighted average of the attenuations of the sequence member rocks. These results suggest that a high permeability network of sediments or fractures in a lower permeability host rock may have a distinct separable attenuation signature, even if the overall volume of high permeability material is low. Depending on the viscosity of the saturating fluid, the magnitude of the flow-based attenuation can dominate or be dominated by the scattering attenuation at typical sonic logging frequencies (approximately 10 kHz).

  10. ENHANCEMENTS TO NATURAL ATTENUATION: SELECTED CASE STUDIES

    Energy Technology Data Exchange (ETDEWEB)

    Vangelas, K; W. H. Albright, W; E. S. Becvar, E; C. H. Benson, C; T. O. Early, T; E. Hood, E; P. M. Jardine, P; M. Lorah, M; E. Majche, E; D. Major, D; W. J. Waugh, W; G. Wein, G; O. R. West, O

    2007-05-15

    In 2003 the US Department of Energy (DOE) embarked on a project to explore an innovative approach to remediation of subsurface contaminant plumes that focused on introducing mechanisms for augmenting natural attenuation to achieve site closure. Termed enhanced attenuation (EA), this approach has drawn its inspiration from the concept of monitored natural attenuation (MNA).

  11. Reflectance and transmittance model for recto-verso halftone prints

    OpenAIRE

    Hebert, M.; R. D. Hersch

    2006-01-01

    We propose a spectral prediction model for predicting the reflectance and transmittance of recto-verso halftone prints. A recto-verso halftone print is modeled as a diffusing substrate surrounded by two inked interfaces in contact with air (or with another medium). The interaction of light with the print comprises three components: (a) the attenuation of the incident light penetrating the print across the inked interface, (b) the internal reflectance and internal transmittance that accounts f...

  12. UV to far-IR reflectance spectra of carbonaceous chondrites. I. Implications for remote characterization of dark primitive asteroids targeted by sample-return missions

    CERN Document Server

    Trigo-Rodriguez, Josep M; Llorca, Jordi; Fornasier, Sonia; Barucci, Maria A; Belskaya, Irina; Martins, Zita; Rivkin, Andy S; Dotto, Elisabetta; Madiedo, José M; Alonso-Azcárate, Jacinto

    2013-01-01

    We analyze here a wide sample of carbonaceous chondrites from historic falls (e.g. Allende, Cold Bokkeveld, Kainsaz, Leoville, Murchison, Murray and Orgueil), and from NASA Antarctic collection in order to get clues on the role of aqueous alteration in promoting the reflectance spectra diversity evidenced in the most primitive chondrite groups. We particularly focus in the identification of spectral features and behavior that can be used to remotely identify primitive carbonaceous asteroids. The selected meteorite specimens are a sample large enough to exemplify how laboratory reflectance spectra of rare groups of carbonaceous chondrites exhibit distinctive features that can be used to remotely characterize the spectra of primitive asteroids. Our spectra cover the full electromagnetic spectrum from 0.2 to 25 microns by using two spectrometers. First one is a UV-NIR spectrometer that covers the 0.2 to 2 microns window, while the second one is an Attenuated Total Reflectance IR spectrometer covering the 2 to 25...

  13. Chlorine signal attenuation in concrete.

    Science.gov (United States)

    Naqvi, A A; Maslehuddin, M; ur-Rehman, Khateeb; Al-Amoudi, O S B

    2015-11-01

    The intensity of prompt gamma-ray was measured at various depths from chlorine-contaminated silica fume (SF) concrete slab concrete specimens using portable neutron generator-based prompt gamma-ray setup. The intensity of 6.11MeV chloride gamma-rays was measured from the chloride contaminated slab at distance of 15.25, 20.25, 25.25, 30.25 and 35.25cm from neutron target in a SF cement concrete slab specimens. Due to attenuation of thermal neutron flux and emitted gamma-ray intensity in SF cement concrete at various depths, the measured intensity of chlorine gamma-rays decreases non-linearly with increasing depth in concrete. A good agreement was noted between the experimental results and the results of Monte Carlo simulation. This study has provided useful experimental data for evaluating the chloride contamination in the SF concrete utilizing gamma-ray attenuation method.

  14. Neural mechanisms of surround attenuation and distractor competition in visual search.

    Science.gov (United States)

    Boehler, Carsten N; Tsotsos, John K; Schoenfeld, Mircea A; Heinze, Hans-Jochen; Hopf, Jens-Max

    2011-04-06

    Visual attention biases relevant processing in the visual system by amplifying relevant or attenuating irrelevant sensory input. A potential signature of the latter operation, referred to as surround attenuation, has recently been identified in the electromagnetic brain response of human observers performing visual search. It was found that a zone of attenuated cortical excitability surrounds the target when the search required increased spatial resolution for item discrimination. Here we address the obvious hypothesis that surround attenuation serves distractor suppression in the vicinity of the target where interference from irrelevant search items is maximal. To test this hypothesis, surround attenuation was assessed under conditions when the target was presented in isolation versus when it was surrounded by distractors. Surprisingly, substantial and indistinguishable surround attenuation was seen under both conditions, indicating that it reflects an attentional operation independent of the presence of distractors. Adding distractors in the target's surround, however, increased the amplitude of the N2pc--an evoked response known to index distractor competition in visual search. Moreover, adding distractors led to a topographical change of source activity underlying the N2pc toward earlier extrastriate areas. In contrast, the topography of reduced source activity due to surround attenuation remained unaltered with and without distractors in the target's surround. We conclude that surround attenuation is not a direct consequence of the attenuation of distractors in visual search and that it dissociates from attentional operations reflected by the N2pc. A theoretical framework is proposed that links both operations in a common model of top-down attentional selection in visual cortex.

  15. Novel MEMS variable optical attenuator

    Institute of Scientific and Technical Information of China (English)

    Maosong Wu(吴茂松); Chunsheng Yang(杨春生); Xinhui Mao(茅昕辉); Xiaolin Zhao(赵小林); Bingchu Cai(蔡炳初)

    2003-01-01

    A novel MEMS variable optical attenuator (VOA), which has completely different attenuation mechanismfrom those in literatures, is proposed and demonstrated in this paper. The basic operation principle is thatthe optical power coupled between two initially aligned single-mode fibers will be continuously attenuatedwhile the end of one of the fibers is deflected from the initial position. A micromachined solenoid typeinductor with a U-shaped permalloy magnetic core is used to attract the deflectable fiber that has apermalloy coat on its end. To fabricate the multi-layer three-dimensional inductive component, a newUV-LIGA process for thick photoresists is developed, combining advantages of both SU-8 and AZ-4000series photoresists. The inductive component is approximately 1.7 mm× 1.3 mm×50μm in size and has alow resistance value (~ 2.1Ω). The whole size of the VOA before packaging is 30 mm×2 mm×0.6 mm.The first prototype shows less then 3-dB insertion loss at 0-dB attenuation and nearly 40-dB attenuationrange with less than 20 mW electrical input power at wavelength 1550 nm.

  16. Restricted total stability and total attractivity

    Directory of Open Access Journals (Sweden)

    Giuseppe Zappala'

    2006-08-01

    Full Text Available In this paper the new concepts of restricted total stability and total attractivity is formulated. For this purpose the classical theory of Malkin with suitable changes and the theory of limiting equations, introduced by Sell developed by Artstein and Andreev, are used. Significant examples are presented.

  17. Constraining attenuation uncertainty in common midpoint radar surveys of ice sheets

    Science.gov (United States)

    Holschuh, Nicholas; Christianson, Knut; Anandakrishnan, Sridhar; Alley, Richard B.; Jacobel, Robert W.

    2016-10-01

    For common offset radar data, there is no clear way to disentangle path effects from reflector characteristics, so efforts to determine the physical properties at the bed using reflection amplitude are inherently limited by the constraints on englacial attenuation. In this study, we identify the theoretical considerations required for interpreting bistatic radar surveys and use data collected on the Northeast Greenland Ice Stream and Kamb Ice Stream to compute local attenuation profiles. We found that failing to correct for angle-dependent controls on return power (including antenna directivity, the reflection coefficient, and refractive focusing) can bias the computed attenuation rates as much as 30 dB/km for reflectors at 1 km depth. Because the radiation characteristics are the dominant source of uncertainty in our data, we recommend either a simplified survey design for the future (where the antennae are decoupled from the ice surface) or additional data collection to constrain the near-field permittivity and its effect on the radiation pattern. Depth-averaged attenuation rates computed using common midpoint methods for deep reflectors yield values >10 dB/km higher than attenuation rates computed using common offset techniques with the same data. We attribute these anomalously high attenuation rates to additional wavenumber-dependent (and therefore, angle-dependent) interferences between subwavelength reflectors.

  18. Shock propagation and attenuation in high-power excimer lasers

    Science.gov (United States)

    Holzwarth, Achim; Berger, Peter; Huegel, Helmut

    1993-05-01

    Theoretical and experimental investigations on the propagation, reflection, and attenuation of shock waves as they occur in excimer lasers have been performed. The numerical simulations have been carried out using a two-dimensional, unsteady finite difference scheme. The experimental setup is a piston driven shock tube with a rectangular cross section working in air at atmospheric pressure. The shocks were detected interferometrically as well as by means of pressure transducers. This shock tube allows us to investigate basic phenomena of shock diffraction which can be used to confirm the computational results in the range of weak shock waves. In particular, the influence of the shape of the wall contour on the reflection of shock waves has been investigated theoretically. The decay time of pressure and density perturbations differs for various wall configurations in such a way that short electrodes accelerate the attenuation as well as does a strong area increase in the vicinity of them. After each laser pulse there is a shock travelling into the laser channel. Experiments have been carried out on the reflection of this shock at a specially formed bend that is able to focus the shock into a muffling element.

  19. Mode-dependent attenuation of optical fibers: excess loss.

    Science.gov (United States)

    Olshansky, R; Nolan, D A

    1976-04-01

    A theory is presented for calculating the excess loss produced by random perturbations of optical fibers. The theory is applicable to perturbations whose longitudinal spatial frequencies are below the range required for mode coupling. To illustrate the method, losses due to diameter variations are calculated for the case of a step-index optical fiber. The diameter variations are found to produce a strong attenuation of the higher order modes. The total excess loss is approximately wavelength independent.

  20. Imaging seismic reflections

    NARCIS (Netherlands)

    Op 't Root, Timotheus Johannes Petrus Maria

    2011-01-01

    The goal of reflection seismic imaging is making images of the Earth subsurface using surface measurements of reflected seismic waves. Besides the position and orientation of subsurface reflecting interfaces it is a challenge to recover the size or amplitude of the discontinuities. We investigate tw

  1. Knowledge-Level Reflection

    NARCIS (Netherlands)

    Harmelen, van F.A.H.; Wielinga, B.J.; Bredeweg, Bert; Schreiber, G.; Karbach, Werner; Reinders, Martin; Voss, A.; Akkermans, H.; Bartsch-Spoerl, Brigitte; Vinkhuyzen, Erik

    This paper presents an overview of the REFLECT project. It defines the notion of knowledge level reflection that has been central to the project, it compares this notion with existing approaches to reflection in related fields, and investigates some of the consequences of the concept of knowledge le

  2. Liberating Moral Reflection

    Science.gov (United States)

    Horell, Harold D.

    2013-01-01

    The author argues that if we are to foster life-giving and liberating moral reflection, we must first liberate moral reflection from distortions; specifically, from the distorting effects of moral insensitivity, destructive moral relativism, and confusions resulting from a failure to understand the dynamics of moral reflection. The author proposes…

  3. Reflective Learning in Practice.

    Science.gov (United States)

    Brockbank, Anne, Ed.; McGill, Ian, Ed.; Beech, Nic, Ed.

    This book contains 22 papers on reflective learning in practice. The following papers are included: "Our Purpose" (Ann Brockbank, Ian McGill, Nic Beech); "The Nature and Context of Learning" (Ann Brockbank, Ian McGill, Nic Beech); "Reflective Learning and Organizations" (Ann Brockbank, Ian McGill, Nic Beech); "Reflective Learning in Practice" (Ann…

  4. Photodetachment of H- near a Partially Reflecting Surface-Ⅰ

    Institute of Scientific and Technical Information of China (English)

    A.Afaq

    2008-01-01

    Theoretical and interpretative study on the subject of photodetachment of H- near a partially reflecting surface is presented,and the absorption effect of the surface is investigated on the total and differential cross sections using a theoretical imaging method.To understand the absorption effect,a reflection parameter K is introduced as a multiplicative factor to the outgoing detached-electron wave of H- propagating towards the wall.The reflection parameter measures.how much electron wave would reflect from the surface;K=0 corresponds to no reflection and K=1 corresponds to the total reflection.

  5. Assimilation of attenuated data from X-band network radars using ensemble Kalman filter

    Science.gov (United States)

    Cheng, Jing

    To use reflectivity data from X-band radars for quantitative precipitation estimation and storm-scale data assimilation, the effect of attenuation must be properly accounted for. Traditional approaches try to make correction to the attenuated reflectivity first before using the data. An alternative, theoretically more attractive approach builds the attenuation effect into the reflectivity observation operator of a data assimilation system, such as an ensemble Kalman filter (EnKF), allowing direct assimilation of the attenuated reflectivity and taking advantage of microphysical state estimation using EnKF methods for a potentially more accurate solution. This study first tests the approach for the CASA (Center for Collaborative Adaptive Sensing of the Atmosphere) X-band radar network configuration through observing system simulation experiments (OSSE) for a quasi-linear convective system (QLCS) that has more significant attenuation than isolated storms. To avoid the problem of potentially giving too much weight to fully attenuated reflectivity, an analytical, echo-intensity-dependent model for the observation error (AEM) is developed and is found to improve the performance of the filter. By building the attenuation into the forward observation operator and combining it with the application of AEM, the assimilation of attenuated CASA observations is able to produce a reasonably accurate analysis of the QLCS inside CASA radar network coverage. Compared with foregoing assimilation of radar data with weak radar reflectivity or assimilating only radial velocity data, our method can suppress the growth of spurious echoes while obtaining a more accurate analysis in the terms of root-mean-square (RMS) error. Sensitivity experiments are designed to examine the effectiveness of AEM by introducing multiple sources of observation errors into the simulated observations. The performance of such an approach in the presence of resolution-induced model error is also evaluated and

  6. Settlement prediction model of slurry suspension based on sedimentation rate attenuation

    Directory of Open Access Journals (Sweden)

    Shuai-jie GUO

    2012-03-01

    Full Text Available This paper introduces a slurry suspension settlement prediction model for cohesive sediment in a still water environment. With no sediment input and a still water environment condition, control forces between settling particles are significantly different in the process of sedimentation rate attenuation, and the settlement process includes the free sedimentation stage, the log-linear attenuation stage, and the stable consolidation stage according to sedimentation rate attenuation. Settlement equations for sedimentation height and time were established based on sedimentation rate attenuation properties of different sedimentation stages. Finally, a slurry suspension settlement prediction model based on slurry parameters was set up with a foundation being that the model parameters were determined by the basic parameters of slurry. The results of the settlement prediction model show good agreement with those of the settlement column experiment and reflect the main characteristics of cohesive sediment. The model can be applied to the prediction of cohesive soil settlement in still water environments.

  7. Secure Communication via a Recycling of Attenuated Classical Signals

    Science.gov (United States)

    Smith, A. Matthew

    2017-01-01

    We describe a simple method of interleaving a classical and quantum signal in a secure communication system at a single wavelength. The system transmits data encrypted via a one-time pad on a classical signal and produces a single-photon reflection of the encrypted signal. This attenuated signal can be used to observe eavesdroppers and produce fresh secret bits. The system can be secured against eavesdroppers, detect simple tampering or classical bit errors, produces more secret bits than it consumes, and does not require any entanglement or complex wavelength division multiplexing, thus, making continuous secure two-way communication via one-time pads practical.

  8. Envelope broadening and scattering attenuation of a scalar wavelet in random media having power-law spectra

    Science.gov (United States)

    Sato, Haruo

    2016-01-01

    Peak delay and envelope broadening of an S-wavelet with travel distance increasing are seen in short-period seismograms of small earthquakes. Those phenomena are results of scattering by random velocity inhomogeneities in the earth medium. As shown in sonic well-log data we may suppose that random velocity fluctuation has power-law spectra even in the seismic spectral range. As a simple mathematical model, we study how the envelope of a scalar wavelet varies in von Kármán-type random media, which have power-law spectra at large wavenumbers. Since the centre wavenumber of a wavelet is a unique scale in the power-law spectral range, using it as a reference, we divide the random media into the low-wavenumber spectral (long-scale) component and the high-wavenumber spectral (short-scale) component. For the wave propagation through the long-scale component of random media, we may apply the parabolic approximation to the wave equation. Using the Markov approximation, which is a stochastic extension of the phase screen method, we directly synthesize the energy density, which is the mean-square (MS) envelope of a wavelet in a given frequency band. The envelope duration increases according to the second power of travel distance. There is an additional factor, the wandering effect which increases the envelope duration according to the traveltime fluctuation. Wide angle scattering caused by the short-scale component of random media attenuates wave amplitude with travel distance increasing. We use the total scattering coefficient of the short-scale component as a measure of scattering attenuation per distance, which is well described by the Born approximation. Multiplying the exponential scattering attenuation factor by the MS envelope derived by the Markov approximation, we can synthesize the MS envelope reflecting all the spectral components of random media. When the random medium power spectra have a steep role-off at large wavenumbers, the envelope broadening is small and

  9. Total light absorption in graphene

    CERN Document Server

    Thongrattanasiri, Sukosin; de Abajo, F Javier Garcia

    2011-01-01

    We demonstrate that 100% light absorption can take place in a single patterned sheet of doped graphene. General analysis shows that a planar array of small lossy particles exhibits full absorption under critical-coupling conditions provided the cross section of each individual particle is comparable to the area of the lattice unit-cell. Specifically, arrays of doped graphene nanodisks display full absorption when supported on a substrate under total internal reflection, and also when lying on a dielectric layer coating a metal. Our results are relevant for infrared light detectors and sources, which can be made tunable via electrostatic doping of graphene.

  10. Bioavailability of jarosite for stimulating acid mine drainage attenuation

    Science.gov (United States)

    Coggon, Matthew; Becerra, Caryl Ann; Nüsslein, Klaus; Miller, Karen; Yuretich, Richard; Ergas, Sarina J.

    2012-02-01

    Biological reduction of iron-sulfate minerals, such as jarosite, has the potential to contribute to the natural attenuation of acid mine drainage (AMD) sites. Previous studies of AMD attenuation at Davis Mine, an abandoned pyrite mine in Rowe Massachusetts, provided evidence of iron and sulfate reduction by indigenous bacteria. Jarosite is a large component of the sediment at Davis Mine and may play a role in AMD attenuation. In this study, microcosms were constructed with groundwater and sediment from Davis Mine and amended with glycerol, nitrogen and phosphorus (GNP) and naturally formed natrojarosite. Over time, higher total iron, sulfate, pH and sodium concentrations and lower oxidation-reduction potentials were observed in microcosms amended with GNP and jarosite, compared with unamended microcosms and killed controls. Geochemical modeling predicted jarosite precipitation under microcosm conditions, suggesting that abiotic processes were unlikely contributors to jarosite dissolution. SEM imaging at the jarosite surface showed microbial attachment. Microbial community composition analysis revealed a shift to higher populations of Clostridia, which are known to reduce both iron and sulfate. The results show that jarosite may be utilized as an electron acceptor by iron and/or sulfate reducing bacteria at Davis Mine and its presence may aid in the attenuation of AMD.

  11. Imaging Rayleigh wave attenuation with USArray

    Science.gov (United States)

    Bao, Xueyang; Dalton, Colleen A.; Jin, Ge; Gaherty, James B.; Shen, Yang

    2016-07-01

    The EarthScope USArray provides an opportunity to obtain detailed images of the continental upper mantle at an unprecedented scale. The majority of mantle models derived from USArray data to date contain spatial variations in seismic-wave speed; however, in many cases these data sets do not by themselves allow a non-unique interpretation. Joint interpretation of seismic attenuation and velocity models can improve upon the interpretations based only on velocity and provide important constraints on the temperature, composition, melt content, and volatile content of the mantle. The surface wave amplitudes that constrain upper-mantle attenuation are sensitive to factors in addition to attenuation, including the earthquake source excitation, focusing and defocusing by elastic structure, and local site amplification. Because of the difficulty of isolating attenuation from these other factors, little is known about the attenuation structure of the North American upper mantle. In this study, Rayleigh wave traveltime and amplitude in the period range 25-100 s are measured using an interstation cross-correlation technique, which takes advantage of waveform similarity at nearby stations. Several estimates of Rayleigh wave attenuation and site amplification are generated at each period, using different approaches to separate the effects of attenuation and local site amplification on amplitude. It is assumed that focusing and defocusing effects can be described by the Laplacian of the traveltime field. All approaches identify the same large-scale patterns in attenuation, including areas where the attenuation values are likely contaminated by unmodelled focusing and defocusing effects. Regionally averaged attenuation maps are constructed after removal of the contaminated attenuation values, and the variations in intrinsic shear attenuation that are suggested by these Rayleigh wave attenuation maps are explored.

  12. Reflection Positive Doubles

    CERN Document Server

    Jaffe, Arthur

    2016-01-01

    Here we introduce reflection positive doubles, a general framework for reflection positivity, covering a wide variety of systems in statistical physics and quantum field theory. These sy