WorldWideScience

Sample records for assortment structure analysis

  1. Assortment structure in beech coppice stands in Boljevac region

    Directory of Open Access Journals (Sweden)

    Danilović Milorad

    2004-01-01

    Full Text Available Assortment structure in beech coppice stands was studied in the area of Boljevac. Assortment structure was evaluated according to the articles of the valid standard (JUS. The assortments represented in the assortment structure, based on the stemwood quality are: Logs for matches, sawlogs I II and III classes, mine timber, technical roundwood, pulpwood, wood for excelsior and fuelwood, I and II classes. The results of the analyses show that the value assortment structure (sum of the values of assortments produced from one tree grows significantly with the increase of tree diameter and this dependence is presented by a degree function. The value percentage of logs for matches, sawlogs of the I and II classes, technical roundwood, mine timber, fuelwood and pulpwood, grows with the increase of the tree diameter. The occurrence of better quality logs (sawlogs in these stands, in contrast to the beech coppice stand in the area of Crni Vrh results from the more favourable diameter structure. There are no statistically significant differences between the value assortment structure on the established sample plot series within the same locality, consequently the data ere united. Because of the differences in stand age, the data are not unified for the localities, although there are no statistically significant differences between value assortment structure for diameter degrees represented in them. False heart (red heart is one of very significant defects of beech wood, and its incidence, inter alia, depends on tree age. The low effect of this defect of wood resulted in a significant percentage of logs for matches. Along with the value assortment structure this paper also presents the percentage of assortments depending on tree diameter.

  2. Assortment structure in beech coppice stands in the Crni vrh region

    Directory of Open Access Journals (Sweden)

    Danilović Milorad

    2003-01-01

    Full Text Available Assortment structure in beech coppice stands was studied for the region of Crni vrh. Assortment structure was determined according to the standard (JUS in two ecological units. The study results show that the assortment value structure significantly increases with the increase of tree diameter and that there are no statistically significant differences in assortment structure between the selected ecological units. The dependence of the assortment value structure on tree diameter can be represented by an exponential function. The value percentage of assortments made of stem wood in theoretical crosscutting depending on tree diameter has an increasing tendency, except for the wood for excelsior.

  3. Social Structure and Personality Assortment Among Married Couples

    NARCIS (Netherlands)

    Bekkers, René; Aken, Marcel A.G. van; Denissen, Jaap

    2006-01-01

    We study the influence of social structure on assortative mating for personality in a large national sample (n=3616) of married and cohabitating couples in the Netherlands. We find that couples with higher levels of education and from dissimilar religious origins are more similar with regard to

  4. An Evaluation of Practical Applicability of Multi-Assortment Production Break-Even Analysis based on Mining Companies

    Science.gov (United States)

    Fuksa, Dariusz; Trzaskuś-Żak, Beata; Gałaś, Zdzisław; Utrata, Arkadiusz

    2017-03-01

    In the practice of mining companies, the vast majority of them produce more than one product. The analysis of the break-even, which is referred to as CVP (Cost-Volume-Profit) analysis (Wilkinson, 2005; Czopek, 2003) in their case is significantly constricted, given the necessity to include multi-assortment structure in the analysis, which may have more than 20 types of assortments (depending on the grain size) in their offer, as in the case of open-pit mines. The article presents methods of evaluation of break-even (volume and value) for both a single-assortment production and a multi-assortment production. The complexity of problem of break-even evaluation for multi-assortment production has resulted in formation of many methods, and, simultaneously, various approaches to its analysis, especially differences in accounting fixed costs, which may be either totally accounted for among particular assortments, relating to the whole company or partially accounted for among particular assortments and partially relating to the company, as a whole. The evaluation of the chosen methods of break-even analysis, given the availability of data, was based on two examples of mining companies: an open-pit mine of rock materials and an underground hard coal mine. The selection of methods was set by the available data provided by the companies. The data for the analysis comes from internal documentation of the mines - financial statements, breakdowns and cost calculations.

  5. Educational assortative mating and economic inequality: a comparative analysis of three Latin American countries.

    Science.gov (United States)

    Torche, Florencia

    2010-05-01

    Educational assortative mating and economic inequality are likely to be endogenously determined, but very little research exists on their empirical association. Using census data and log-linear and log-multiplicative methods, I compare the patterns of educational assortative mating in Brazil, Chile, and Mexico, and explore the association between marital sorting and earnings inequality across countries. The analysis finds substantial variation in the strength of specific barriers to educational intermarriage between countries, and a close association between these barriers and the earnings gaps across educational categories within countries. This finding suggests an isomorphism between assortative mating and economic inequality. Furthermore, educational marital sorting is remarkably symmetric across gender in spite of the different resources that men and women bring to the union. This study highlights the limitations of using single aggregate measures of spousal educational resemblance (such as the correlation coefficient between spouses' schooling) to capture variation in assortative mating and its relationship with socioeconomic inequality.

  6. Geographically selective assortment of cycles in pandemics: meta-analysis of data collected by Chizhevsky.

    Science.gov (United States)

    Gumarova, L; Cornélissen, G; Hillman, D; Halberg, F

    2013-10-01

    In the incidence patterns of cholera, diphtheria and croup during the past when they were of epidemic proportions, we document a set of cycles (periods), one of which was reported and discussed by A. L. Chizhevsky in the same data with emphasis on the mirroring in human disease of the ~11-year sunspot cycle. The data in this study are based on Chizhevsky’s book The Terrestrial Echo of Solar Storms and on records from the World Health Organization. For meta-analysis, we used the extended linear and nonlinear cosinor. We found a geographically selective assortment of various cycles characterizing the epidemiology of infections, which is the documented novel topic of this paper, complementing the earlier finding in the 21st century or shortly before, of a geographically selective assortment of cycles characterizing human sudden cardiac death. Solar effects, if any, interact with geophysical processes in contributing to this assortment.

  7. Assessment of the effect of quality factors on the assortment structure in poplar plantations

    Directory of Open Access Journals (Sweden)

    Danilović Milorad

    2008-01-01

    Full Text Available Quality factors affecting the assortment quality structure in poplar plantations were researched on nine temporary sample plots in the period 1997-2004, from the aspect of the implementation of roundwood standards. Sample plots were selected depending on the factors, the effect of which was studied. The following factors were researched: clonal species, planting pattern, flood risk, pruning of branches, plantation position and age. The study was performed by the original methodology. Based on the study results, it is concluded that knots have the highest effect on the assortment quality structure in poplar plantations, regardless of the site and stand conditions. Their effect rises significantly with the increase of tree diameter. Also, the analyses show that the number of large and rotten knots on the tree trunk increases considerably with the older age. In the flooded area, the sweep of the lower part of the stem is more intensive and multiple curvatures are frequent on the trees growing immediately along the river, whereas curvature decreases with the distance from the river bank. Based on the study results, it is concluded that the percentage of best quality assortments is considerably reduced by the above wood defects.

  8. Collaboration in sensor network research: an in-depth longitudinal analysis of assortative mixing patterns.

    Science.gov (United States)

    Pepe, Alberto; Rodriguez, Marko A

    2010-09-01

    Many investigations of scientific collaboration are based on statistical analyses of large networks constructed from bibliographic repositories. These investigations often rely on a wealth of bibliographic data, but very little or no other information about the individuals in the network, and thus, fail to illustrate the broader social and academic landscape in which collaboration takes place. In this article, we perform an in-depth longitudinal analysis of a relatively small network of scientific collaboration (N = 291) constructed from the bibliographic record of a research centerin the development and application of wireless and sensor network technologies. We perform a preliminary analysis of selected structural properties of the network, computing its range, configuration and topology. We then support our preliminary statistical analysis with an in-depth temporal investigation of the assortative mixing of selected node characteristics, unveiling the researchers' propensity to collaborate preferentially with others with a similar academic profile. Our qualitative analysis of mixing patterns offers clues as to the nature of the scientific community being modeled in relation to its organizational, disciplinary, institutional, and international arrangements of collaboration.

  9. Assortative mating and the maintenance of population structure in a natural hybrid zone.

    Science.gov (United States)

    Culumber, Zachary W; Ochoa, Olivia M; Rosenthal, Gil G

    2014-08-01

    Understanding the factors that give rise to natural hybrid zones and govern their dynamics and structure is important to predicting the evolutionary consequences of hybridization. Here we use a combination of multigenerational population genetic data, mating patterns from a natural population, behavioral assays, and mark-recapture data within clinal hybrid zones of the genus Xiphophorus to test the role of assortative mating in maintaining population structure and the potential for ongoing genetic exchange between heterospecifics. Our data demonstrate that population structure is temporally robust and driven largely by assortative mating stemming from precopulatory isolation between pure species. Furthermore, mark-recapture data revealed that rates of migration within the same stream reach are far below the level needed to support population structure. In contrast to many empirical studies of natural hybrid zones, there appeared to be no hybrid male dysfunction or discrimination against hybrid males by pure parental females, and hybrid females mated and associated with pure species and hybrid males at random. Despite strong isolation between pure parentals, hybrids therefore can act as a conduit for genetic exchange between heterospecifics, which has been shown to increase the tempo of evolutionary change. Additionally, our findings highlight the complexity of natural hybrid zone dynamics, demonstrating that sexual and ecological selection together can give rise to patterns that do not fit classical models of hybrid zone evolution.

  10. Rate of phenotypic assortment in Tetrahymena thermophila.

    Science.gov (United States)

    Doerder, F P; Deak, J C; Lief, J H

    1992-01-01

    During vegetative, asexual reproduction in heterozygous Tetrahymena thermophila, the macronucleus divides amitotically to produce clonal lineages that express either one or the other allele but not both. Because such phenotypic assortment has been described for every locus studied, its mechanism has important implications concerning the development and structure of the macronucleus. The primary tools to study assortment are Rf, the rate at which subclones come to express a single allele stably, and the output ratio, the ratio of assortee classes. Because Rf is related to the number of assorting units, a constant Rf for all loci suggests that all genes are maintained at the same copy number. Output ratios reflect the input ratio of assorting units, with a 1:1 output ratio implying equal numbers of alleles at the end of macronuclear development. Because different outcomes would suggest a different macronuclear structure, it is crucial that these parameters be accurately measured. Although published Rf values are similar for all loci measured, there has been no commonly accepted form of presentation and analysis. Here we examine the experimental determination of Rf. First, we use computer simulation to describe how the variability inherent in the assortment process affects experimental determination of Rf. Second, we describe a simple method of plotting assortment data that permits the uniform calculation of Rf, and we describe how to measure Rf accurately in instances when it is possible to score only the recessive allele. Using this method to produce truly comparable Rfs for all published data, we find that most, if not all, loci assort at Rfs consistent with approximately 45 assorting units, as has been asserted.

  11. [The marketing analysis of assortment of market of pharmaceuticals applied in treatment of psoriasis in Ukraine].

    Science.gov (United States)

    Kotvitskaya, A A; Karlo, V V

    2013-01-01

    The analysis of assortment of pharmaceuticals for treatment of psoriasis recommended by Minzdrav of Ukraine and present at the national pharmaceutical market is made. The characteristics of distribution of national and foreign producers of antihistamine and anti-psoriatic pharmaceuticals are established The availability of particular medicinal forms of various producers is analyzed too. The characteristics and tendencies in consumption of these groups of pharmaceuticals in natural and monetary units are analyzed including dynamics of changes of mean wholesale prices during the analyzed period.

  12. The Analysis Of The Correlations And Regressions Between Some Characters On A Wheat Isogenic Varities Assortment

    Science.gov (United States)

    Păniţă, Ovidiu

    2015-09-01

    In the years 2012-2014 on Banu-Maracine DRS there were tested an assortment of 25 isogenic lines of wheat (Triticum aestivum ssp.vulgare), the analyzed characters being the number of seeds/spike, seeds weight/spike (g), no. of spikes/m2, weight of a thousand seeds (WTS) (g) and no. of emerged plants/m2. Based on recorded data and statistical processing of those, they were identified a numbers of links between these characters. Also available regression models were identified between some of the studied characters. Based on component analysis, no. of seeds/spike and seeds weight/spike are components that influence in excess of 88% variance analysis, a total of seven genotypes with positive scores for both factors.

  13. ASSORTMENT AND PRICE POLICY OF STATE PHARMACIES OF MOSCOW

    Directory of Open Access Journals (Sweden)

    I. V. Voronovich

    2015-01-01

    Full Text Available The most important index which determines the level and quality of pharmaceutical support is the correspondence of assortment to consumers needs. Assortment policy is determined by the functions implemented, and the problems of organization of pharmaceutical support of medicinal organizations within the frameworks of substantiated and reasonable expenditure of budget funds, and affordable pharmaceutical support of the population. The purpose of this research was the study of assortment and price policy of state pharmacies of Moscow. The objects were pharmacy subdivisions of state pharmacy network of Moscow. We have used sociological methods (questionnaire, interviewing, method of marketing, and statistic analysis. We have studied the assortment structure, assortment groups’ distribution on price segments. We have established that the drugs, more than 60% of which are foreign-made occupied more than a half of the assortment. Medicinal drugs in 50 rubles price spectrum occupy the biggest share of pharmacy assortment. Distribution within every assortment group revealed that more than a half of drugs are in average price spectrum from 50 to 500 rubles. Average charge for VED amounts to 21.87%, and for drugs which were not included in VED list – 34.07%. The charge for the goods, the price of which is not regulated, trade charge is more. 

  14. Over-Education and Assortative Matching in Partnerships: A Theoretical Analysis

    Science.gov (United States)

    Tampieri, Alessandro

    2016-01-01

    This paper argues that assortative matching may explain over-education. Education determines individuals' income and, due to the presence of assortative matching, the quality of partners in personal, social and working life. Thus, an individual acquires education to improve the expected partners' quality. However, since every individual of the…

  15. Healthy snacks at the checkout counter: A lab and field study on the impact of shelf arrangement and assortment structure on consumer choices

    National Research Council Canada - National Science Library

    Kleef, van, E; Otten, K.K; Trijp, van, J.C.M

    2012-01-01

    .... To determine how consumers can effectively be guided to select healthier snacks, we examine the effect of manipulating the assortment structure and shelf layout of an impulse display including both...

  16. Assortment Variety : Attribute versus Product-Based

    NARCIS (Netherlands)

    van Herpen, H.W.I.; Pieters, R.

    2000-01-01

    Retailers need to decide on the content and structure of their product assortments, and thereby on the degree of variety that they offer to their customers.This paper compares measures of assortment variety and relates them to underlying variety components.We conceptualize assortment variety from a

  17. A phylogenetic analysis of body size evolution in the Anolis roquet group (Sauria: Iguanidae): character displacement or size assortment?

    Science.gov (United States)

    Giannasi, N; Thorpe, R S; Malhotra, A

    2000-02-01

    The important role that competition plays in structuring communities is well documented; however, the role of competition in an evolutionary context remains unclear. Evolutionary investigations into the role of competition have often focused on the process of character displacement, and a good example of this is the evolution of body size in the Anolis lizards of the Caribbean islands. Previous work on the A. roquet species group has taken a phylogenetic approach and concluded that patterns of body size differences are not caused by character displacement but are a result of size assortment. Using a phylogenetic reconstruction based on the sequence of the cytochrome b gene (cyt-b) and ancestral character-state reconstruction methods, we investigated the roles of character displacement and size assortment. Our results indicated that size assortment alone was insufficient to explain the observed patterns of body size differences. Furthermore, we found that change in body size was associated with a change in allopatry/sympatry, thus supporting the character-displacement hypothesis. We conclude that patterns of body size differences in the A. roquet species group appear to be the result of a combination of character displacement and size assortment because character displacement was only found to be possible on three occasions.

  18. THE ASSORTMENT STRUCTURE AND THE PRICE LEVELS AS A FACTOR OF MARKETING CHANNEL COMPETITIVENESS–EMPIRICAL EVIDENCE FROM THE REPUBLIC OF SERBIA

    Directory of Open Access Journals (Sweden)

    Jelena Končar

    2016-12-01

    Full Text Available In this paper, the authors point out the differences in the structure of the product assortment of retailers who show their offers on the Web, with the aim of proving that the structure of the assortment may be a factor of marketing channel competitiveness that the consumers recognize and that makes them opt for a certain marketing channel. On the same basis we aim to compare the prices of representative product categories, in order to determine the impact of prices on marketing channel competitiveness, without taking other factors of channel competitiveness into consideration. Based on the conducted research, we can conclude that having a number of categories of products in the assortment presents a competitive advantage for the retailer in the traditional marketing channel since retailers with electronic sales have a more diverse assortment in their retail store than online. Compared to “pure play” electronic retailers, the structure of assortment measured in number of categories of products that are on offer in e-stores is not significantly different between “pure play” and “bricks and clicks” electronic retailers. On the other hand, if we look at the price levels, there is a difference in prices of product categories on websites of “brick and click” retailers since prices in retail stores are higher than prices in the traditional retail store of the same retailer. However, offers on the website of “pure play” electronic retailers are higher compared to “brick and click” retailers.

  19. Healthy snacks at the checkout counter: A lab and field study on the impact of shelf arrangement and assortment structure on consumer choices

    Directory of Open Access Journals (Sweden)

    van Kleef Ellen

    2012-12-01

    Full Text Available Abstract Background The essence of nudging is to adapt the environment in which consumers make decisions to help them make better choices, without forcing certain outcomes upon them. To determine how consumers can effectively be guided to select healthier snacks, we examine the effect of manipulating the assortment structure and shelf layout of an impulse display including both healthy and unhealthy snacks near the checkout counter of a canteen. Methods Both a lab and field study applied a two-factor experimental design manipulating snack offerings both in an on-screen choice environment and a natural environment (hospital staff restaurant. Shelf arrangement (i.e. accessibility was altered by putting healthy snacks at higher shelves versus lower shelves. Assortment structure (i.e. availability was altered by offering an assortment that either included 25% or 75% healthy snacks. Participants in the lab study (n = 158 made a choice from a shelf display. A brief survey following snack selection asked participants to evaluate the assortment and their choice. The field experiment took place in a hospital canteen. Daily sales data were collected for a period of four weeks. On completion of the field study, employees (n = 92 filled out a questionnaire about all four displays and rated their attractiveness, healthiness and perceived freedom of choice. Results The lab study showed a higher probability of healthy snack choice when 75% of the assortment consisted of healthy snacks compared to conditions with 25% healthy snack assortments, even though choices were not rated less satisfying or more restrictive. Regarding shelf display location of healthy snacks, no significant differences were observed. There was also no significant shelf arrangement by assortment structure interactive effect. The field study replicated these findings, in that this assortment structure led to higher sales of healthy snacks. Sales of unhealthy and total snacks were

  20. Healthy snacks at the checkout counter: a lab and field study on the impact of shelf arrangement and assortment structure on consumer choices.

    Science.gov (United States)

    van Kleef, Ellen; Otten, Kai; van Trijp, Hans C M

    2012-12-12

    The essence of nudging is to adapt the environment in which consumers make decisions to help them make better choices, without forcing certain outcomes upon them. To determine how consumers can effectively be guided to select healthier snacks, we examine the effect of manipulating the assortment structure and shelf layout of an impulse display including both healthy and unhealthy snacks near the checkout counter of a canteen. Both a lab and field study applied a two-factor experimental design manipulating snack offerings both in an on-screen choice environment and a natural environment (hospital staff restaurant). Shelf arrangement (i.e. accessibility) was altered by putting healthy snacks at higher shelves versus lower shelves. Assortment structure (i.e. availability) was altered by offering an assortment that either included 25% or 75% healthy snacks. Participants in the lab study (n = 158) made a choice from a shelf display. A brief survey following snack selection asked participants to evaluate the assortment and their choice. The field experiment took place in a hospital canteen. Daily sales data were collected for a period of four weeks. On completion of the field study, employees (n = 92) filled out a questionnaire about all four displays and rated their attractiveness, healthiness and perceived freedom of choice. The lab study showed a higher probability of healthy snack choice when 75% of the assortment consisted of healthy snacks compared to conditions with 25% healthy snack assortments, even though choices were not rated less satisfying or more restrictive. Regarding shelf display location of healthy snacks, no significant differences were observed. There was also no significant shelf arrangement by assortment structure interactive effect. The field study replicated these findings, in that this assortment structure led to higher sales of healthy snacks. Sales of unhealthy and total snacks were not impacted by manipulations (no main or interaction effects

  1. The structure of a food product assortment modulates the effect of providing choice on food intake.

    Science.gov (United States)

    Parizel, Odile; Sulmont-Rossé, Claire; Fromentin, Gilles; Delarue, Julien; Labouré, Hélène; Benamouzig, Robert; Marsset-Baglieri, Agnès

    2016-09-01

    Several authors showed that providing choice may increase food liking and food intake. However, the impact of choice may be modulated by assortment's characteristics, such as the number of alternatives or their dissimilarity. The present study compared the impact of choice on food liking and intake under the two following conditions: (1) when choosing a product to consume from among similar products versus dissimilar products; and (2) when choosing a product to consume from among pleasant products versus unpleasant products. Two experiments were carried out using the same design: the "apple puree" experiment (n = 80), where the volunteers choose from among similar products (apple purees varying in texture) and the "dessert" experiment (n = 80), where the volunteers choose from among dissimilar products (fruit dessert, dairy dessert, custard, pudding). During the first session, participants rated their liking for 12 products (apples purees or desserts). Then the participants were divided into a "pleasant" group (n = 40) in which volunteers were assigned three pleasant products, and an "unpleasant" group (n = 40) in which volunteers were assigned three unpleasant products. Finally, all of the volunteers participated in a choice session - volunteers were presented with their three assigned products and asked to choose one of the products, and a no-choice session - volunteers were served with one product that was randomly selected from among their three assigned products. Providing choice led to an increase in food liking in both experiments and an increase in food intake only for the desserts, namely only when the volunteers chose the product to consume from among "not too similar" alternatives. No effect of assortment's pleasantness was observed.

  2. Growth and yield models, assortment type and analysis of deadwood in chestnut coppice

    Directory of Open Access Journals (Sweden)

    Marziliano PA

    2013-02-01

    Full Text Available Chestnut (Castanea sativa MILL. is one of the most important forest tree species in Europe, and it is considered a symbol of the natural vegetation in southern Europe. In Calabria (southern Italy chestnut forest covers an area of approximately 87000 hectares, most of which (about 80% managed as coppice. In this study a growth and yield table has been elaborated. Thurthermore, assortment type and quantity of deadwood have been evaluated according to age of coppice and forest fire prevention, respectively. The study site is located in the “Presila of Catanzaro” and the research was carried out in 15 plots; the age of the examined stands ranged from 2 to 50 years old. More than 30000 shoots per hectare were recorded in the first two years after coppicing. As opposed, about 2300 and 1000 shoots per hectare were observed 15 and 50 years after coppicing, respectively. The culmination of the mean annual increment of the forest standing volume (16 m3 ha-1 year-1 was highlighted 25 years after coppicing, while the current annual increment culmination (21 m3 ha-1 year-1 was observed at 15 years. Fifteen years after coppicing, most of the wood production was constituted by small dimension assortments. Twenty five years after coppicing small and large poles were the prevailing assortments while telegraph poles and timber beams increased after 50 years. The amount of deadwood in forest ranged between 11.9 and 68.7 m3 ha-1. The largest component was represented by standing dead shoots. The results show that coppice management can be adopted even if the main purpose of the chestnut stand is the production of large size assortments. In chestnut coppice, highly vulnerable to fire, the reduction of stand density with silvicultural practices (thinning and displacement is the main way to promote the efficiency of forest and a higher strength and resiliency against forest fire.

  3. Optimizing Retail Assortments

    NARCIS (Netherlands)

    Rooderkerk, Robert P.; van Heerde, Harald J.; Bijmolt, Tammo H. A.

    2013-01-01

    Retailers face the problem of finding the assortment that maximizes category profit. This is a challenging task because the number. of potential assortments is very large when there are many stock-keeping units (SKUs) to choose from. Moreover, SKIT sales can be cannibalized by other SKUs in the

  4. Optimizing retail assortments

    NARCIS (Netherlands)

    R.P. Rooderkerk (Robert); H.J. van Heerde (Harald); T.H.A. Bijmolt (Tammo)

    2013-01-01

    markdownabstract__Abstract__ Retailers face the problem of finding the assortment that maximizes category profit. This is a challenging task because the number of potential assortments is very large when there are many stock-keeping units (SKUs) to choose from. Moreover, SKU sales can be

  5. Optimizing Retail Assortments

    NARCIS (Netherlands)

    Rooderkerk, Robert P.; van Heerde, Harald J.; Bijmolt, Tammo H. A.

    2013-01-01

    Retailers face the problem of finding the assortment that maximizes category profit. This is a challenging task because the number. of potential assortments is very large when there are many stock-keeping units (SKUs) to choose from. Moreover, SKIT sales can be cannibalized by other SKUs in the asso

  6. Chromosome assortment in Saccharum.

    Science.gov (United States)

    Al-Janabi, S M; Honeycutt, R J; Sobral, B W

    1994-12-01

    Recent work has revealed random chromosome pairing and assortment in Saccharum spontaneum L., the most widely distributed, and morphologically and cytologically variable of the species of Saccharum. This conclusion was based on the analysis of a segregating population from across between S. spontaneum 'SES 208' and a spontaneously-doubled haploid of itself, derived from anther culture. To determine whether polysomic inheritance is common in Saccharum and whether it is observed in a typical biparental cross, we studied chromosome pairing and assortment in 44 progeny of a cross between euploid, meiotically regular, 2n=80 forms of Saccharum officinarum 'LA Purple' and Saccharum robustum ' Mol 5829'. Papuan 2n=80 forms of S. robustum have been suggested as the immediate progenitor species for cultivated sugarcane (S. officinarum). A total of 738 loci in LA Purple and 720 loci in Mol 5829 were amplified and typed in the progeny by arbitrarily primed PCR using 45 primers. Fifty and 33 single-dose polymorphisms were identified in the S. officinarum and S. robustum genomes, respectively (χ 2 at 98%). Linkage analysis of single-dose polymorphisms in both genomes revealed linkages in repulsion and coupling phases. In the S. officinarum genome, a map hypothesis gave 7 linkage groups with 17 linked and 33 unlinked markers. Four of 13 pairwise linkages were in repulsion phase and 9 were in coupling phase. In the S. robustum genome, a map hypothesis gave 5 linkage groups, defined by 12 markers, with 21 markers unlinked, and 2 of 9 pairwise linkages were in repulsion phase. Therefore, complete polysomic inheritance was not observed in either species, suggesting that chromosomal behavior is different from that observed by linkage analysis of over 500 markers in the S. spontaneum map. Implications of this finding for evolution and breeding are discussed.

  7. Healthy snacks at the checkout counter: A lab and field study on the impact of shelf arrangement and assortment structure on consumer choices

    OpenAIRE

    van Kleef Ellen; Otten Kai; van Trijp Hans CM

    2012-01-01

    Abstract Background The essence of nudging is to adapt the environment in which consumers make decisions to help them make better choices, without forcing certain outcomes upon them. To determine how consumers can effectively be guided to select healthier snacks, we examine the effect of manipulating the assortment structure and shelf layout of an impulse display including both healthy and unhealthy snacks near the checkout counter of a canteen. Methods Both a lab and field study applied a tw...

  8. Assortment of encounters and evolution of cooperativeness.

    Science.gov (United States)

    Eshel, I; Cavalli-Sforza, L L

    1982-02-01

    The method of evolutionary stable strategies (ESS), in its current form, is confronted with a difficulty when it tries to explain how some social behaviors initiate their evolution. We show that this difficulty may be removed by changing the assumption made tacitly in game theory (and in ESS) of randomness of meetings or encounters. In reality, such randomness seems to be rare in nature. Family, population and social structure, customs, and habits impose various types of deviation from randomness. Introducing nonrandomness of meeting in a way formally similar to assortative mating, we show that the bar to initial increase of inherited cooperative or altruistic behaviors can be removed, provided there is sufficient assortment of meetings. Family structure may cause contacts predominantly between certain types of relatives, and one can reconstruct some results of classical kin selection in terms of evolutionary stable strategy with assortative meetings. Neighbor effects and group selection might be similarly treated. Assortment need not be a passive consequence of population and social structure, but it can also be actively pursued. Behaviors favoring the choice of cooperative companions will have the effect of favoring the evolution of cooperativeness. It can be shown that discrimination in the choice of companions, especially if combined with assortment, can favor the development of cooperativeness, making initial increase of cooperative behavior possible even at levels of assortment passively imposed which would not be adequate, per se, to guarantee the increase of cooperativeness. It is possible that, in some cases, cooperativeness and behavior favoring some type of assortment are coselected.

  9. Modern state of the assortment drugs for the treatment of vaginal candidosis

    OpenAIRE

    Юлия Валентиновна Левачкова; Татьяна Григорьевна Ярных; Валентина Николаевна Чушенко; Снежана Николаевна Пушок

    2015-01-01

    Today the problem of treatment of vaginal candidosis and creation of effective drugs for the treatment of this disease is actual for modern gynecology and pharmacy.Aim: to explore the structure of the assortment of drugs for the treatment of vaginal candidosis, presented in the Ukrainian pharmaceutical market.Methods: Statistical and marketing methods of investigation of electronic and paper sources of information. Implemented analysis assortment based on the materials of the State Register d...

  10. The Analysis Of The Strain Influence On Some Yield Elemnts On An Assortment Of Isogenic Wheat Varieties

    Science.gov (United States)

    Păniţă, Ovidiu

    2015-09-01

    In the years 2012-2014 on Banu-Maracine DRS were tested an assortment consists of 25 isogenic lines of common wheat (Triticum aestivum ssp.vulgare), with the combination of Rht1&rht8 genes, the analyzed characters being the hight of the strain (cm), the number of seeds/spike, seeds weight/spike (g), no. of spikes/m2, weight of a thousand seeds (WTS) (g) and no. of emerged plants/m2. Based on recorded data and statistical processing of those, they were identified a numbers of links between these characters, links quantified by using the correlation. Regarding the classification based on the average high of the strain, it was found that that there is a strong link between some characters too. Based on component analysis, the no. of seeds/spike and the seeds weight/spikes are components that influence in excess of 83% variance analysis, a total of five genotypes having positive scores for both factors.

  11. Managing assortment in terms of foreign economic activity of the enterprise trade

    Directory of Open Access Journals (Sweden)

    Sergei Udin

    2015-02-01

    Full Text Available Assortment management is the main task of trade enterprises. Assortment is a basic tool in the marketing mix, it affects the sales and distribution costs. Management of assortment is an important issue for interna-tional companies, because they have a high cost of export-import operations, and this fact influences the financial result. The article considers the information technology assortment management aimed at increas-ing turnover and reducing distribution costs by forming a balanced assortment structure.

  12. Assortative model for social networks

    Science.gov (United States)

    Catanzaro, Michele; Caldarelli, Guido; Pietronero, Luciano

    2004-09-01

    In this Brief Report we present a version of a network growth model, generalized in order to describe the behavior of social networks. The case of study considered is the preprint archive at cul.arxiv.org. Each node corresponds to a scientist, and a link is present whenever two authors wrote a paper together. This graph is a nice example of degree-assortative network, that is, to say a network where sites with similar degree are connected to each other. The model presented is one of the few able to reproduce such behavior, giving some insight on the microscopic dynamics at the basis of the graph structure.

  13. Assortment Structure, Prior Knowledge and Brand Choice%商品陈列方式、先验品牌知识与品牌选择决策--弱势品牌的视角

    Institute of Scientific and Technical Information of China (English)

    黄赞; 王新新

    2015-01-01

    Consumers tend to have a higher evaluation and purchase intention toward the products with stronger brands. Compared to foreign products, Chinese alternatives usually occupy a weaker brand position. Hence, Chinese manufacturers who want to increase market share commonly adopt a low-price strategy. However, such strategy may greatly weaken the organization’s ability to gain profits and undermine its long-term development. Moreover, low price is likely to be used by consumers as a signal of poor quality of the products. Therefore, it is important for Chinese manufacturers with weak brands to adopt new competitive strategies. The purpose of this study was to examine how assortment structure affects consumer’s brand choice. The key hypothesis was that the manufacturers with weaker brands, rather than stronger ones, could optimize the assortment structure to affect consumers’ brand choice in a retail environment. We conducted three empirical studies to test our hypotheses. In Study 1, we conducted three separated experiments to examine the impact of the assortment structure on consumers’ perceived variety of products. In particular, Study 1a explored the main effect of the assortment structure (attribute-based vs. benefit-based) on consumers’ perceived variety. Then, studies 1b and 1c composed a Chain-of-Experiments and tested the intermediate mechanism of the construal level in the causal relationship between the assortment structure and consumers’ perceived variety: Study 1b examined the impact of assortment structure on consumers’ construal level, and Study 1c tested the impact of the construal level on consumers’ perceived variety. Study 2 investigated the causal relationship between the assortment structure and consumers’ brand choice. Studies 1 and 2 adopted a one-way between-subject design. Study 3 explored the moderating effect of consumers’ prior knowledge of brand strength in the causal relationship and used a 2 (attribute-based vs. benefit

  14. Assortative mating and fragmentation within dog breeds

    Directory of Open Access Journals (Sweden)

    Hailer Frank

    2008-01-01

    Full Text Available Abstract Background There are around 400 internationally recognized dog breeds in the world today, with a remarkable diversity in size, shape, color and behavior. Breeds are considered to be uniform groups with similar physical characteristics, shaped by selection rooted in human preferences. This has led to a large genetic difference between breeds and a large extent of linkage disequilibrium within breeds. These characteristics are important for association mapping of candidate genes for diseases and therefore make dogs ideal models for gene mapping of human disorders. However, genetic uniformity within breeds may not always be the case. We studied patterns of genetic diversity within 164 poodles and compared it to 133 dogs from eight other breeds. Results Our analyses revealed strong population structure within poodles, with differences among some poodle groups as pronounced as those among other well-recognized breeds. Pedigree analysis going three generations back in time confirmed that subgroups within poodles result from assortative mating imposed by breed standards as well as breeder preferences. Matings have not taken place at random or within traditionally identified size classes in poodles. Instead, a novel set of five poodle groups was identified, defined by combinations of size and color, which is not officially recognized by the kennel clubs. Patterns of genetic diversity in other breeds suggest that assortative mating leading to fragmentation may be a common feature within many dog breeds. Conclusion The genetic structure observed in poodles is the result of local mating patterns, implying that breed fragmentation may be different in different countries. Such pronounced structuring within dog breeds can increase the power of association mapping studies, but also represents a serious problem if ignored. In dog breeding, individuals are selected on the basis of morphology, behaviour, working or show purposes, as well as geographic

  15. Assortative mating and fragmentation within dog breeds.

    Science.gov (United States)

    Björnerfeldt, Susanne; Hailer, Frank; Nord, Maria; Vilà, Carles

    2008-01-28

    There are around 400 internationally recognized dog breeds in the world today, with a remarkable diversity in size, shape, color and behavior. Breeds are considered to be uniform groups with similar physical characteristics, shaped by selection rooted in human preferences. This has led to a large genetic difference between breeds and a large extent of linkage disequilibrium within breeds. These characteristics are important for association mapping of candidate genes for diseases and therefore make dogs ideal models for gene mapping of human disorders. However, genetic uniformity within breeds may not always be the case. We studied patterns of genetic diversity within 164 poodles and compared it to 133 dogs from eight other breeds. Our analyses revealed strong population structure within poodles, with differences among some poodle groups as pronounced as those among other well-recognized breeds. Pedigree analysis going three generations back in time confirmed that subgroups within poodles result from assortative mating imposed by breed standards as well as breeder preferences. Matings have not taken place at random or within traditionally identified size classes in poodles. Instead, a novel set of five poodle groups was identified, defined by combinations of size and color, which is not officially recognized by the kennel clubs. Patterns of genetic diversity in other breeds suggest that assortative mating leading to fragmentation may be a common feature within many dog breeds. The genetic structure observed in poodles is the result of local mating patterns, implying that breed fragmentation may be different in different countries. Such pronounced structuring within dog breeds can increase the power of association mapping studies, but also represents a serious problem if ignored. In dog breeding, individuals are selected on the basis of morphology, behaviour, working or show purposes, as well as geographic population structure. The same processes which have

  16. Dissortative From the Outside, Assortative From the Inside: Social Structure and Behavior in the Industrial Trade Network

    CERN Document Server

    Kelman, Guy; Manes, Eran; Lamieri, Marco; Golo, Natasa; Solomon, Sorin

    2014-01-01

    It is generally accepted that neighboring nodes in financial networks are negatively assorted with respect to the correlation between their degrees. This feature would play an important 'damping' role in the market during downturns (periods of distress) since this connectivity pattern between firms lowers the chances of auto-amplifying (the propagation of) distress. In this paper we explore a trade-network of industrial firms where the nodes are suppliers or buyers, and the links are those invoices that the suppliers send out to their buyers and then go on to present to their bank for discounting. The network was collected by a large Italian bank in 2007, from their intermediation of the sales on credit made by their clients. The network also shows dissortative behavior as seen in other studies on financial networks. However, when looking at the credit rating of the firms, an important attribute internal to each node, we find that firms that trade with one another share overwhelming similarity. We know that m...

  17. Assortativity Effects on Diffusion-like Processes in Scale-free Networks

    CERN Document Server

    D'Agostino, Gregorio; Zlatić, Vinko; Caldarelli, Guido

    2011-01-01

    We study the variation in epidemic thresholds in complex networks with different assortativity properties. We determine the thresholds by applying spectral analysis to the matrices associated to the graphs. In order to produce graphs with a specific assortativity we introduce a procedure to sample the space of all the possible networks with a given degree sequence. Our analysis shows that while disassortative networks have an higher epidemiological threshold, assortative networks have a slower diffusion time for diseases. We also used these networks for evaluating the effects of assortativity in a specific dynamic model of sandpile. We show that immunization procedures give different results according to the assortativity of the network considered.

  18. Evolution of assortative mating in a population expressing dominance.

    Directory of Open Access Journals (Sweden)

    Kristan A Schneider

    Full Text Available In this article, we study the influence of dominance on the evolution of assortative mating. We perform a population-genetic analysis of a two-locus two-allele model. We consider a quantitative trait that is under a mixture of frequency-independent stabilizing selection and density- and frequency-dependent selection caused by intraspecific competition for a continuum of resources. The trait is determined by a single (ecological locus and expresses intermediate dominance. The second (modifier locus determines the degree of assortative mating, which is expressed in females only. Assortative mating is based on similarities in the quantitative trait ('magic trait' model. Analytical conditions for the invasion of assortment modifiers are derived in the limit of weak selection and weak assortment. For the full model, extensive numerical iterations are performed to study the global dynamics. This allows us to gain a better understanding of the interaction of the different selective forces. Remarkably, depending on the size of modifier effects, dominance can have different effects on the evolution of assortment. We show that dominance hinders the evolution of assortment if modifier effects are small, but promotes it if modifier effects are large. These findings differ from those in previous work based on adaptive dynamics.

  19. Assortative and disassortative mixing investigated using the spectra of graphs

    CERN Document Server

    Jalan, Sarika

    2015-01-01

    We investigate the impact of degree-degree correlations on the spectra of networks. Even though density distributions exhibit drastic changes depending on the (dis)assortative mixing and the network architecture, the short range correlations in eigenvalues exhibit universal RMT predictions. The long range correlations turn out to be a measure of randomness in (dis)assortative networks. The analysis further provides insight in to the origin of high degeneracy at the zero eigenvalue displayed by majority of the biological networks.

  20. Lower bound of assortativity coefficient in scale-free networks

    CERN Document Server

    Yang, Dan; Zhou, Tao

    2016-01-01

    The degree-degree correlation is important in understanding the structural organization of a network and the dynamics upon a network. Such correlation is usually measured by the assortativity coefficient $r$, with natural bounds $r \\in [-1,1]$. For scale-free networks with power-law degree distribution $p(k) \\sim k^{-\\gamma}$, we analytically obtain the lower bound of assortativity coefficient in the limit of large network size, which is not -1 but dependent on the power-law exponent $\\gamma$. This work challenges the validation of assortativity coefficient in heterogeneous networks, suggesting that one cannot judge whether a network is positively or negatively correlated just by looking at its assortativity coefficient.

  1. Emergence of assortative mixing between clusters of cultured neurons.

    Directory of Open Access Journals (Sweden)

    Sara Teller

    2014-09-01

    Full Text Available The analysis of the activity of neuronal cultures is considered to be a good proxy of the functional connectivity of in vivo neuronal tissues. Thus, the functional complex network inferred from activity patterns is a promising way to unravel the interplay between structure and functionality of neuronal systems. Here, we monitor the spontaneous self-sustained dynamics in neuronal cultures formed by interconnected aggregates of neurons (clusters. Dynamics is characterized by the fast activation of groups of clusters in sequences termed bursts. The analysis of the time delays between clusters' activations within the bursts allows the reconstruction of the directed functional connectivity of the network. We propose a method to statistically infer this connectivity and analyze the resulting properties of the associated complex networks. Surprisingly enough, in contrast to what has been reported for many biological networks, the clustered neuronal cultures present assortative mixing connectivity values, meaning that there is a preference for clusters to link to other clusters that share similar functional connectivity, as well as a rich-club core, which shapes a 'connectivity backbone' in the network. These results point out that the grouping of neurons and the assortative connectivity between clusters are intrinsic survival mechanisms of the culture.

  2. Emergence of Assortative Mixing between Clusters of Cultured Neurons

    Science.gov (United States)

    Teller, Sara; Granell, Clara; De Domenico, Manlio; Soriano, Jordi; Gómez, Sergio; Arenas, Alex

    2014-01-01

    The analysis of the activity of neuronal cultures is considered to be a good proxy of the functional connectivity of in vivo neuronal tissues. Thus, the functional complex network inferred from activity patterns is a promising way to unravel the interplay between structure and functionality of neuronal systems. Here, we monitor the spontaneous self-sustained dynamics in neuronal cultures formed by interconnected aggregates of neurons (clusters). Dynamics is characterized by the fast activation of groups of clusters in sequences termed bursts. The analysis of the time delays between clusters' activations within the bursts allows the reconstruction of the directed functional connectivity of the network. We propose a method to statistically infer this connectivity and analyze the resulting properties of the associated complex networks. Surprisingly enough, in contrast to what has been reported for many biological networks, the clustered neuronal cultures present assortative mixing connectivity values, meaning that there is a preference for clusters to link to other clusters that share similar functional connectivity, as well as a rich-club core, which shapes a ‘connectivity backbone’ in the network. These results point out that the grouping of neurons and the assortative connectivity between clusters are intrinsic survival mechanisms of the culture. PMID:25188377

  3. More choice is better : Effects of assortment size and composition on assortment evaluations

    NARCIS (Netherlands)

    Koelemeijer, K.; Oppewal, H.

    2005-01-01

    This study focuses on effects of assortment size and composition on assortment evaluation. Data from a choice experiment conducted with members of a large consumer panel suggest that adding any item improves assortment evaluation, regardless of their attributes or the size of the assortment. Althoug

  4. In silico analysis to compare the effectiveness of assorted drugs prescribed for swine flu in diverse medicine systems

    Directory of Open Access Journals (Sweden)

    Kalpana Raja

    2014-01-01

    Full Text Available The genome of the virus H1N1 2009 consists of eight segments but maximum number of mutations occurs at segments 1 and 4, coding for PB2 subunit of hemagglutinin. Comparatively less number of mutations occur at segment 6, coding for neuraminidase. Two antiviral drugs, oseltamivir and zanamivir are commonly prescribed for treating H1N1 infection. Alternate medical systems do compete equally; andrographolide in Siddha and gelsemine in Homeopathy. Recent studies confirm the efficacy of eugenol from Tulsi and vitamins C and E against H1N1. As the protein structures are unavailable, we modeled them using Modeller by identifying suitable templates, 1RUY and 3BEQ, for hemagglutinin and neuraminidase, respectively. Prior to docking simulations using AutoDock, the drug likeness properties of the ligands were screened using in silico techniques. Docking results showed interaction between the proteins individually into selected ligands, except for gelsemine and vitamin E no interactions were shown. The best docking simulation was reported by vitamin C interacting through six hydrogen bonds into proteins hemagglutinin and neuraminidase with binding energies -4.28 and -4.56 kcal/mol, respectively. Furthermore, vitamin C showed hydrophobic interactions with both proteins, two bonds with Arg119, Glu120 of HA, and one bond with Arg74 of NA. In silico docking studies thus recommend vitamin C to be more effective against H1N1.

  5. Assortment and packaging of the segmented rotavirus genome.

    Science.gov (United States)

    McDonald, Sarah M; Patton, John T

    2011-03-01

    The rotavirus (RV) genome comprises 11 segments of double-stranded RNA (dsRNA) and is contained within a non-enveloped, icosahedral particle. During assembly, a highly coordinated selective packaging mechanism ensures that progeny RV virions contain one of each genome segment. Cis-acting signals thought to mediate assortment and packaging are associated with putative panhandle structures formed by base-pairing of the ends of RV plus-strand RNAs (+RNAs). Viral polymerases within assembling core particles convert the 11 distinct +RNAs to dsRNA genome segments. It remains unclear whether RV +RNAs are assorted before or during encapsidation, and the functions of viral proteins during these processes are not resolved. However, as reviewed here, recent insights gained from the study of RV and two other segmented RNA viruses, influenza A virus and bacteriophage Φ6, reveal potential mechanisms of RV assortment and packaging.

  6. Product assortment and individual decision processes.

    Science.gov (United States)

    Chernev, Alexander

    2003-07-01

    Research presented in this article examines the impact of product assortment on individuals' decisions. Four experiments report converging evidence that the impact of assortment is moderated by the degree to which individuals have articulated attribute preferences, whereby individuals with an articulated ideal point are more likely to prefer larger assortments than individuals without articulated preferences. The data further show that choices made from large assortments are associated with more selective, alternative-based, and confirmatory processing for individuals with articulated preferences and more comprehensive, attribute-based, and comparative processing for those without articulated preferences.

  7. Unusual assortment of segments in 2 rare human rotavirus genomes.

    Science.gov (United States)

    De Grazia, Simona; Giammanco, Giovanni M; Potgieter, Christiaan A; Matthijnssens, Jelle; Banyai, Krisztian; Platia, Maria A; Colomba, Claudia; Martella, Vito

    2010-05-01

    Using full-length genome sequence analysis, we investigated 2 rare G3P[9] human rotavirus strains isolated from children with diarrhea. The genomes were recognized as assortments of genes closely related to rotaviruses originating from cats, ruminants, and humans. Results suggest multiple transmissions of genes from animal to human strains of rotaviruses.

  8. 闽北天然阔叶林径阶材种结构分析及出材率表的编制%Compilation of Output Structure of Diameter Grade Wood Assortments and Volume Ratio Table for Natural Broad-Leaved Forest Tree Species in North Fujian Province

    Institute of Scientific and Technical Information of China (English)

    李晓景; 江希钿; 庄崇洋; 李小铃

    2012-01-01

    应用闽北天然阔叶林现场造材资料,在分析径阶材种结构规律的基础上,选择适合的方程建立材种出材率模型并编制二元材种出材率表.经检验,该表精度较高,在林业生产上有实用价值.为方便生产中应用,还建立了树高曲线模型,由二元材种出材率袁导出了一元材种出材率表.%The volume ratio model of wood assortment was built by choosing the proper equation, and the two dimension merchantable wood assortment volume yielding rate tables were compiled based on structure analyses of diameter grade wood assortments, with on the spot sample timber data collected from the natural broad-leaved forests in the north Fujian Province. The wood assortment volume yielding rate tables were tested to be with high precision and practicable in forestry production. In order to facilitate the production and application, tree height model was established, and the one dimension merchantable wood assortment volume yielding rate tables were derived from the two dimension tables.

  9. Colour assortative pairing in a colour polymorphic lizard is independent of population morph diversity

    Science.gov (United States)

    Pérez i de Lanuza, Guillem; Font, Enrique; Carretero, Miguel Ángel

    2016-10-01

    Previous work with a colour polymorphic population of Podarcis muralis (Lacertidae) revealed that lizards pair by ventral colour, favouring the same colour (i.e. homomorphic) pairs. Such assortative pairing, which probably results in colour assortative mating, can have consequences for the genetic structure of the population and potentially promote speciation. The population previously studied, located in the Pyrenees, encompasses white, yellow and orange animals, as well as intermediate white-orange and yellow-orange morphs. However, other Pyrenean populations of P. muralis have less ventral colour morphs. Our aim in this study is to test the generality of the assortative colour pairing system, extending our previous analyses to populations with different morph compositions and frequencies. The results show that the assortative pattern of pairing is similar in all the populations analysed and, hence, independent of morph composition and not restricted to pentamorphic populations. This suggests that assortative pairing by colour is a general phenomenon for colour polymorphic populations of P. muralis.

  10. 多品种产品的线性盈亏分析%Linear Profit-loss Balance Analysis of Multi-assortment Production

    Institute of Scientific and Technical Information of China (English)

    薛静

    2001-01-01

    Discusses several analytic methods of the linear profit-loss balance and their applying prerequisites of multi-assortment production in order to get an efficient analytic method and thus increases the profit of an enterprise. A demonstration of the application of these methods is presented.%结合实例,对多品种产品生产销售的几种线性的盈亏平衡分析法及其运用条件进行了探讨和分析,以找到一种有效的分析方法,以提高企业的经济效益.

  11. Inducing Self-Organized Criticality in a network toy model by neighborhood assortativity

    CERN Document Server

    Allen-Perkins, Alfonso; Pastor, Juan Manuel

    2016-01-01

    Complex networks are a recent type of frameworks used to study complex systems with many interacting elements, such as Self-Organized Criticality (SOC). The network node's tendency to link to other nodes of similar type is characterized by assortative mixing. Real networks exhibit assortative mixing by vertex degree, however typical random network models, such as Erdos-Renyi or Barabasi-Albert, show no assortative arrangements. In this paper we introduce the neighborhood assortativity notion, as the tendency of a node to belong to a community (its neighborhood) showing an average property similar to its own. Imposing neighborhood assortative mixing by degree in a network toy model, SOC dynamics can be found. The long-range correlations resulting from the criticality have been characterized by means of fluctuation analysis and show an anticorrelation in the node's activity. The model contains only one parameter and its statistics plots for different values of the parameter can be collapsed into a single curve....

  12. Understanding Consumer Reactions to Assortment Unavailability

    NARCIS (Netherlands)

    L.M. Sloot (Laurens)

    2006-01-01

    textabstractAny regular grocery shopper will be familiar with the annoying situation in which his or her preferred product is not available at the moment (s) he wants to buy it. Assortment unavailability can be temporary (e.g., out-of-stock) or permanent in nature (e.g., assortment reduction). Shop

  13. Perceptions and evaluations of assortment variety

    NARCIS (Netherlands)

    van Herpen, H.W.I.

    2001-01-01

    Given the explosive growth in the number of products, managing their assortments is a challenging task for retailers. An understanding of consumer responses to changes in assortment size and composition is required. This dissertation examines consumers' perceptions and evaluations of product assortm

  14. An Ideal Assortative Network and Synchronization

    Institute of Scientific and Technical Information of China (English)

    DONG Cheng-Dong; LIU Zeng-Rong

    2007-01-01

    This paper proposes a novel complex network with assortative property based on multi-center networks. The average path length and clustering coefficient of the network are calculated, and the impact on the network topology is investigated. A simple dynamic system established on the proposed network is used to analyze how the assortative property of the network affects synchronization.

  15. Assortative mating and differential male mating success in an ash hybrid zone population

    Directory of Open Access Journals (Sweden)

    Frascaria-Lacoste Nathalie

    2006-11-01

    Full Text Available Abstract Background The structure and evolution of hybrid zones depend mainly on the relative importance of dispersal and local adaptation, and on the strength of assortative mating. Here, we study the influence of dispersal, temporal isolation, variability in phenotypic traits and parasite attacks on the male mating success of two parental species and hybrids by real-time pollen flow analysis. We focus on a hybrid zone population between the two closely related ash species Fraxinus excelsior L. (common ash and F. angustifolia Vahl (narrow-leaved ash, which is composed of individuals of the two species and several hybrid types. This population is structured by flowering time: the F. excelsior individuals flower later than the F. angustifolia individuals, and the hybrid types flower in-between. Hybrids are scattered throughout the population, suggesting favorable conditions for their local adaptation. We estimate jointly the best-fitting dispersal kernel, the differences in male fecundity due to variation in phenotypic traits and level of parasite attack, and the strength of assortative mating due to differences in flowering phenology. In addition, we assess the effect of accounting for genotyping error on these estimations. Results We detected a very high pollen immigration rate and a fat-tailed dispersal kernel, counter-balanced by slight phenological assortative mating and short-distance pollen dispersal. Early intermediate flowering hybrids, which had the highest male mating success, showed optimal sex allocation and increased selfing rates. We detected asymmetry of gene flow, with early flowering trees participating more as pollen donors than late flowering trees. Conclusion This study provides striking evidence that long-distance gene flow alone is not sufficient to counter-act the effects of assortative mating and selfing. Phenological assortative mating and short-distance dispersal can create temporal and spatial structuring that appears

  16. Marital assortment and phenotypic convergence: longitudinal evidence.

    Science.gov (United States)

    Caspi, A; Herbener, E S

    1993-01-01

    This study provides a direct test of whether the observed similarity of spouses is due to initial assortment rather than to convergence of phenotypes. With data from three well-known longitudinal studies, phenotypic convergence is examined using both variable- and person-centered analyses. The longitudinal evidence does not support the hypothesis that couples increasingly resemble each other with time. Spouse correlations most likely reflect initial assortment at marriage and not the convergence of phenotypes.

  17. Higher order assortativity in complex networks

    CERN Document Server

    Arcagni, Alberto; Stefani, Silvana; Torriero, Anna

    2016-01-01

    Assortativity was first introduced by Newman and has been extensively studied and applied to many real world networked systems since then. Assortativity is a graph metrics and describes the tendency of high degree nodes to be directly connected to high degree nodes and low degree nodes to low degree nodes. It can be interpreted as a first order measure of the connection between nodes, i.e. the first autocorrelation of the degree-degree vector. Even though assortativity has been used so extensively, to the author's knowledge, no attempt has been made to extend it theoretically. This is the scope of our paper. We will introduce higher order assortativity by extending the Newman index based on a suitable choice of the matrix driving the connections. Higher order assortativity will be defined for paths, shortest paths, random walks of a given time length, connecting any couple of nodes. The Newman assortativity is achieved for each of these measures when the matrix is the adjacency matrix, or, in other words, the...

  18. A mechanism for the evolution of altruism among nonkin: positive assortment through environmental feedback.

    Science.gov (United States)

    Pepper, John W; Smuts, Barbara B

    2002-08-01

    The evolution of altruism often requires genetic similarity among interactors. For structured populations in which a social trait affects all group members, this entails positive assortment, meaning that cooperators and noncooperators tend to be segregated into different groups. Several authors have claimed that mechanisms other than common descent can produce positive assortment, but this claim has not been generally accepted. Here, we describe one such mechanism. The process of "environmental feedback" requires only that the cooperative trait affects the quality of the local environment and that individuals are more likely to leave low-quality than high-quality environments. We illustrate this dynamic using an agent-based spatial model of feeding restraint. Depending on parameter settings, results included both positive assortment (required for the evolution of altruism) and negative assortment (required for the evolution of spite). The mechanism of environmental feedback appears to be a general one that could play a role in the evolution of many forms of cooperation.

  19. Assortative Mating for Psychopathy Components and its Effects on the Relationship Quality in Intimate Partners

    Directory of Open Access Journals (Sweden)

    Igor Kardum

    2017-05-01

    Full Text Available In three studies, we examined assortative mating for psychopathy components as well as its effects on the relationship quality in intimate partners. Compared to the original structure we confirmed three factors of psychopathy: criminal tendencies (CT, erratic lifestyle (ELS and interpersonal manipulation (IM, while callous affect (CA was not replicated. Hypotheses regarding positive versus negative assortment, initial assortment versus convergence, and active assortment versus social homogamy were tested. All hypotheses were examined using both variable-centered approach (VCA and couple-centered approach (CCA. We found moderate positive assortment between intimate partners in psychopathy as a latent construct estimated by structural modelling. Furthermore, positive assortment for all three components of psychopathy was found either by using only VCA (CT, only CCA (IM or both approaches (ELS. Additionally, initial assortment rather than convergence hypothesis and active assortment rather than social homogamy hypothesis was confirmed for all three psychopathy components, with a slight tendency towards divergence and social homogamy. We explored the effects of similarity in psychopathy components on the women and men' relationship quality by using profile similarity and polynomial regression analyses. Profile similarity in IM was significantly positively related to women's relationship quality, while the results of the polynomial regression analyses were more complex, and showed that only (dissimilarity in CT did not exert any effect on women and men's relationship quality. Greater disagreement between women and men's ELS was related with more sharp decrease of women's relationship quality, while men's relationship quality decreased at the higher levels of women and men's ELS. Greater disagreement between women and men's IM results in a lower women's relationship quality, while women and men's relationship quality was higher when women's IM was

  20. Simple models of assortment through environmental feedback.

    Science.gov (United States)

    Pepper, John W

    2007-01-01

    Social evolution depends critically on assortment, or segregation versus even mixing, between cooperators and noncooperators. Altruistic traits, which reduce the absolute fitness of their bearers, cannot evolve without positive assortment (excess segregation). The question of how positive assortment can arise has been controversial, but most evolutionary biologists believe that common descent is the only effective general mechanism. Here I investigate another recently proposed mechanism for generating nonrandom assortment, termed environmental feedback. This requires only that two forms of a trait affect the quality of the local environment differently in such a way that all individuals are more likely to leave low-quality locales. Experiments with simple computational models confirm that environmental feedback generates significant levels of genetic similarity among non-kin within locales. The mechanism is fairly general, and can under some conditions produce levels of genetic similarity comparable to those resulting from close genealogical relationship. Environmental feedback can also generate the negative assortment necessary for the evolution of spiteful traits. Environmental feedback is expected to create positive frequency-dependent selection, which thus favor any social trait that becomes common in the population. Results from this stylized model suggest that environmental feedback could be important in the evolution of both cooperation and spite, within as well as between species.

  1. Multivariate models of mixed assortment: phenotypic assortment and social homogamy for education and fluid ability.

    Science.gov (United States)

    Reynolds, C A; Baker, L A; Pedersen, N L

    2000-11-01

    Phenotypic assortment is assumed to be the principal mechanism of spouse similarity in most biometrical studies. Other assortment mechanisms, such as social homogamy, may be plausible. Two models are presented that consider phenotypic assortment and social homogamy simultaneously (i.e., mixed assortment), where selective associations between social background factors (Model I) versus selective associations between total environments (Model II) distinguish the models. A series of illustrative analyses was undertaken for education and fluid ability available on a sample of 116 Swedish twin pairs and their spouses. On the basis of several fit criteria Model I was preferred over Model II. Both social homogamy and phenotypic assortment may contribute to spouse similarity for educational attainment and fluid ability. Furthermore, spouse similarity for fluid ability may arise indirectly from social homogamy and phenotypic assortment for educational attainment. Power analyses indicated greater observed power for Model I than Model II. Additional power analyses indicated that considerably more twin-spouse sets would be needed for Model II than Model I, to resolve social homogamy and phenotypic assortment. Effects of misspecification of mechanisms of spouse similarity are also briefly discussed.

  2. Assortativity in generalized preferential attachment models

    CERN Document Server

    Krot, Alexander

    2016-01-01

    In this paper, we analyze assortativity of preferential attachment models. We deal with a wide class of preferential attachment models (PA-class). It was previously shown that the degree distribution in all models of the PA-class follows a power law. Also, the global and the average local clustering coefficients were analyzed. We expand these results by analyzing the assortativity property of the PA-class of models. Namely, we analyze the behavior of $d_{nn}(d)$ which is the average degree of a neighbor of a vertex of degree $d$.

  3. Linking intra- and interspecific assortative mating: Consequences for asymmetric sexual isolation.

    Science.gov (United States)

    Svensson, Erik I; Nordén, Anna; Waller, John T; Runemark, Anna

    2016-06-01

    Assortative mating is of interest because of its role in speciation and the maintenance of species boundaries. However, we know little about how within-species assortment is related to interspecific sexual isolation. Most previous studies of assortative mating have focused on a single trait in males and females, rather than utilizing multivariate trait information. Here, we investigate how intraspecific assortative mating relates to sexual isolation in two sympatric and congeneric damselfly species (genus Calopteryx). We connect intraspecific assortment to interspecific sexual isolation by combining field observations, mate preference experiments, and enforced copulation experiments. Using canonical correlation analysis, we demonstrate multivariate intraspecific assortment for body size and body shape. Males of the smaller species mate more frequently with heterospecific females than males of the larger species, which showed less attraction to small heterospecific females. Field experiments suggest that sexual isolation asymmetry is caused by male preferences for large heterospecific females, rather than by mechanical isolation due to interspecific size differences or female preferences for large males. Male preferences for large females and male-male competition for high quality females can therefore counteract sexual isolation. This sexual isolation asymmetry indicates that sexual selection currently opposes a species boundary.

  4. Algorithm design and influence analysis of assortativity changing in given degree distribution%确定度分布条件下可变同配系数的算法构造与影响分析∗

    Institute of Scientific and Technical Information of China (English)

    李静; 张洪欣; 王小娟; 金磊

    2016-01-01

    Complex network is the abstract topology of a large number of nodes and edges in reality. How to reveal the influences of internal network topology on network connectivity and vulnerability characteristics is a hotspot of current research. In this paper, we analyze the influence of assortativity according to Newman’s definition of assortativity in a given degree distribution. To fully understand the influence of assortativity we should change the assortativity to see how the topology of network changes. But we find the existing greedy algorithm cannot improve assortativity effectively. First we put forward a deterministic algorithm based on degree distribution and an uncertain algorithm based on probability distribution to increase assortativity. The deterministic algorithm can create a certain network which has a large assortativity without changing node degree. The uncertain algorithm can increase the assortativity continuously by changing the connection of edges. And the uncertain algorithm creates different graphs each time, so the result of the algorithm is uncertain. Then we test our algorithms on three networks (ER network, BA network, Email network) and compare with greedy algorithm, and the experimental results show that the uncertain algorithm performs better than greedy algorithm in three networks which have a large span of assortativity. And our deterministic algorithm performs well in a real world network. We find that we can increase assortativity coefficient up to 1 in ER network. This is because nodes in the ER network are peer to peer. We can also show that that the assortativity cannot increase up to 1 in some networks because nodes in these networks are not in the same status. Because we obtain a large span of assortativity, we can fully understand the change of network topology. On this basis, we analyze the changes of clustering coefficient when using the uncertain algorithm based on a probability distribution to increase the assortativity

  5. Assortative mating by unwed biological parents of adopted children.

    Science.gov (United States)

    Plomin, R; DeFries, J C; Roberts, M K

    1977-04-22

    Analyses of data obtained from 662 unwed couples whose children were relinquished for adoption reveal that biological parents of adopted children mate assortatively. For physical characters, assortative mating of unwed parents was similar to that of wed parents; for behavior characters, however, there was less assortative mating by the unwed parents. Because assortative mating inflates estimates of genetic parameters in adoption studies, future studies should collect information on both biological parents.

  6. Anticipated identification costs: Improving assortment evaluation by diagnostic attributes

    NARCIS (Netherlands)

    Herpen, van E.; Pieters, F.G.M.

    2007-01-01

    Abstract Consumers often make quick assessments of product assortments, to determine if these are worthwhile for further investigation. They anticipate how difficult it will be to distinguish the various options in the assortment, which will influence their assortment evaluations. We reason that the

  7. Using Social Network Methods to Test for Assortment of Prosociality among Korean High School Students.

    Science.gov (United States)

    Kim, Jun-Hong; Holman, Darryl J; Goodreau, Steven M

    2015-01-01

    Assortative interaction among altruistic individuals is a necessary condition for the evolution of cooperation. The requirement for assortment holds regardless of whether a meta-population is subdivided into distinct and isolated subgroups or has ephemeral boundaries with a high migration rate. The assumption, however, is rarely tested directly. In this paper, we develop a method to test for assortment of prosociality in network-structured data. The method is applied to a friendship network collected from 238 Korean students attending the same high school. A mixing matrix was used to explore the presence of assortative friendship among more prosocial individuals. An exponential random graph model of network structure that accounts for additional observed relational propensities (higher-than-expected number of people nominating no friends) and sampling constraints (upper bound on friendship nominations) found that individual prosociality predicted friendship propensity, and that individuals with higher prosocial scores had a higher probability of befriending other more prosocial individuals. The results reveal that a considerable level of assortment of prosociality characterizes this population.

  8. Assortment and the evolution of generalized reciprocity.

    Science.gov (United States)

    Rankin, Daniel J; Taborsky, Michael

    2009-07-01

    Reciprocity is often invoked to explain cooperation. Reciprocity is cognitively demanding, and both direct and indirect reciprocity require that individuals store information about the propensity of their partners to cooperate. By contrast, generalized reciprocity, wherein individuals help on the condition that they received help previously, only relies on whether an individual received help in a previous encounter. Such anonymous information makes generalized reciprocity hard to evolve in a well-mixed population, as the strategy will lose out to pure defectors. Here we analyze a model for the evolution of generalized reciprocity, incorporating assortment of encounters, to investigate the conditions under which it will evolve. We show that, in a well-mixed population, generalized reciprocity cannot evolve. However, incorporating assortment of encounters can favor the evolution of generalized reciprocity in which indiscriminate cooperation and defection are both unstable. We show that generalized reciprocity can evolve under both the prisoner's dilemma and the snowdrift game.

  9. Assortativity Decreases the Robustness of Interdependent Networks

    CERN Document Server

    Zhou, Di; Scala, Antonio; Stanley, H Eugene

    2012-01-01

    The protection of critical infrastructures is one of the highest priorities in our technological society. It was recently recognized that interdependencies among different networks can play a crucial role in triggering cascading failures and hence system-wide disasters. A recent model shows how pairs of interdependent networks can exhibit an abrupt percolation transition as failures accumulate. We report on the effects of topology on failure propagation for a model system consisting of two interdependent networks. We find that the internal node correlations in each of the two interdependent networks significantly changes the critical density of failures that triggers the total disruption of the two-network system. We find, in particular, that the assortativity within a single network decreases the robustness of the entire system. The results of this study on the influence of assortativity may provide insights into ways of improving the robustness of network architecture, and thus enhance the level of protecti...

  10. METHODOLOGY OF KNOWLEDGE RESOURCES AUDIT FOR FORMATION OF PHARMACY ORGANIZATION ASSORTMENT

    Directory of Open Access Journals (Sweden)

    I. M. Razdorskaya

    2015-01-01

    Full Text Available The timeliness of this subject is conditioned by the increase of a role of knowledge in pharmacy organizations (PO management, significance increase of non-material assets in a competition on the pharmaceutical market. The development and substantiation of methodology of knowledge resources audit significance on the example of drug assortment formation for allergic rhinitis treatment. We have used sociological, statistic, expert methods of a study. Close attention was paid to the method of target management, construction of target tree. The construction of the target tree of the knowledge resources audit was based on the main target establishment, targets of the first level, and eight subtargets. We have offered new special positions of assortment formation. “Formation of consumers’ loyalty” is the target of the first level, subtargets “Analysis of clients preferences”, “Transformation of clients preferences”, “Positioning of consumers by the compliance degree”. We have determined the relevance significance by the main target achievement – rational assortment formation. We have shown that the achievement of the first level target “Formation of consumers’  loyalty” conduce the achievement of the main target by 40%. The analysis of the current assortment and a process of assortment upgrading guarantee the achievement of the target by 30% each. The methodology is prospective for knowledge resources audit by the principal business processes of pharmacy organizations.  

  11. THE IMPROVING OF ASSORTMENT BY «BUMFA GROUP» IN CHERKESSK

    Directory of Open Access Journals (Sweden)

    Gayduk V. I.

    2015-09-01

    Full Text Available The article presents and analyzes the assortment of "Bumfa Group" with the methods of ABC analysis, XYZ-analysis. It gives the description of the goods offered by the organization, its customers and its main competitors. The profile of competitive advantages and disadvantages is compiled. It presents the results of marketing research of consumers acquiring products offered by LLC "Bumfa Group" - the goods in terms of popularity, the factors influencing the decision to purchase, customers’ satisfaction in price, packaging and product quality, the results of customers’choice of new products to update the assortment, customers’ satisfaction in volume of incoming advertising information about the products of "Bumfa Group." The necessity to optimize the assortment of the organization is founded. To achieve this aim we developed a project to introduce new products in the range of goods - wet wipes for office equipment. The characteristics of the new product, the production plan and performance indicators of the project are supplied

  12. Palindromes drive the re-assortment in Influenza A.

    Science.gov (United States)

    Zubaer, Abdullah; Thapa, Simrika

    2011-01-01

    Different subtypes of Influenza A virus are associated with species specific, zoonotic or pandemic Influenza. The cause of its severity underlies in complicated evolution of its segmented RNA genome. Although genetic shift and genetic drift are well known in the evolution of this virus, we reported the significant role of unique RNA palindromes in its evolution. Our computational approach identified the existence of unique palindromes in each subtype of Influenza A virus with its absence in Influenza B relating the fact of virulence and vigorous genetic hitchhiking in Influenza A. The current study focused on the re-assortment event responsible for the emergence of pandemic-2009 H1N1 virus, which is associated with outgrow of new palindrome and in turn, changing its RNA structure. We hypothesize that the change in RNA structure due to the presence of palindrome facilitates the event of re-assortment in Influenza A. Thus the evolutionary process of Influenza A is much more complicated as previously known, and that has been demonstrated in this study.

  13. Inducing self-organized criticality in a network toy model by neighborhood assortativity.

    Science.gov (United States)

    Allen-Perkins, Alfonso; Galeano, Javier; Pastor, Juan Manuel

    2016-11-01

    Complex networks are a recent type of framework used to study complex systems with many interacting elements, such as self-organized criticality (SOC). The network nodes' tendency to link to other nodes of similar type is characterized by assortative mixing. Real networks exhibit assortative mixing by vertex degree, however, typical random network models, such as the Erdős-Rényi or the Barabási-Albert model, show no assortative arrangements. In this paper we introduce the notion of neighborhood assortativity as the tendency of a node to belong to a community (its neighborhood) showing an average property similar to its own. Imposing neighborhood assortative mixing by degree in a network toy model, SOC dynamics can be found. These dynamics are driven only by the network topology. The long-range correlations resulting from criticality have been characterized by means of fluctuation analysis and show an anticorrelation in the node's activity. The model contains only one parameter and its statistics plots for different values of the parameter can be collapsed into a single curve. The simplicity of the model allows us to perform numerical simulations and also to study analytically the statistics for a specific value of the parameter, making use of the Markov chains.

  14. Phenotypic assortment in wild primate networks: implications for the dissemination of information.

    Science.gov (United States)

    Carter, Alecia J; Lee, Alexander E G; Marshall, Harry H; Ticó, Miquel Torrents; Cowlishaw, Guy

    2015-05-01

    Individuals' access to social information can depend on their social network. Homophily-a preference to associate with similar phenotypes-may cause assortment within social networks that could preclude information transfer from individuals who generate information to those who would benefit from acquiring it. Thus, understanding phenotypic assortment may lead to a greater understanding of the factors that could limit the transfer of information between individuals. We tested whether there was assortment in wild baboon (Papio ursinus) networks, using data collected from two troops over 6 years for six phenotypic traits-boldness, age, dominance rank, sex and the propensity to generate/exploit information-using two methods for defining a connection between individuals-time spent in proximity and grooming. Our analysis indicated that assortment was more common in grooming than proximity networks. In general, there was homophily for boldness, age, rank and the propensity to both generate and exploit information, but heterophily for sex. However, there was considerable variability both between troops and years. The patterns of homophily we observed for these phenotypes may impede information transfer between them. However, the inconsistency in the strength of assortment between troops and years suggests that the limitations to information flow may be quite variable.

  15. Inducing self-organized criticality in a network toy model by neighborhood assortativity

    Science.gov (United States)

    Allen-Perkins, Alfonso; Galeano, Javier; Pastor, Juan Manuel

    2016-11-01

    Complex networks are a recent type of framework used to study complex systems with many interacting elements, such as self-organized criticality (SOC). The network nodes' tendency to link to other nodes of similar type is characterized by assortative mixing. Real networks exhibit assortative mixing by vertex degree, however, typical random network models, such as the Erdős-Rényi or the Barabási-Albert model, show no assortative arrangements. In this paper we introduce the notion of neighborhood assortativity as the tendency of a node to belong to a community (its neighborhood) showing an average property similar to its own. Imposing neighborhood assortative mixing by degree in a network toy model, SOC dynamics can be found. These dynamics are driven only by the network topology. The long-range correlations resulting from criticality have been characterized by means of fluctuation analysis and show an anticorrelation in the node's activity. The model contains only one parameter and its statistics plots for different values of the parameter can be collapsed into a single curve. The simplicity of the model allows us to perform numerical simulations and also to study analytically the statistics for a specific value of the parameter, making use of the Markov chains.

  16. Effect of assortative mixing in the second-order Kuramoto model

    CERN Document Server

    Peron, Thomas K DM; Rodrigues, Francisco A; Kurths, Jürgen

    2015-01-01

    In this paper we analyze the second-order Kuramoto model presenting a positive correlation between the heterogeneity of the connections and the natural frequencies in scale-free networks. We numerically show that discontinuous transitions emerge not just in disassortative but also in assortative networks, in contrast with the first-order model. We also find that the effect of assortativity on network synchronization can be compensated by adjusting the phase damping. Our results show that it is possible to control collective behavior of damped Kuramoto oscillators by tuning the network structure or by adjusting the dissipation related to the phases movement.

  17. Co-assortment in integron-associated gene cassette assemblages in environmental DNA samples

    Directory of Open Access Journals (Sweden)

    Michael Carolyn A

    2010-08-01

    Full Text Available Abstract Background It has been shown that integron-associated gene cassettes exist largely in tandem arrays of variable size, ranging from antibiotic resistance arrays of three to five cassettes up to arrays of more than 100 cassettes associated with the vibrios. Further, the ecology of the integron/gene cassette system has been investigated by showing that very many different cassettes are present in even small environmental samples. In this study, we seek to extend the ecological perspective on the integron/gene cassette system by investigating the way in which this diverse cassette metagenome is apportioned amongst prokaryote lineages in a natural environment. Results We used a combination of PCR-based techniques applied to environmental DNA samples and ecological analytical techniques to establish co-assortment within cassette populations, then establishing the relationship between this co-assortment and genomic structures. We then assessed the distribution of gene cassettes within the environment and found that the majority of gene cassettes existed in large co-assorting groups. Conclusions Our results suggested that the gene cassette diversity of a relatively pristine sampling environment was structured into co-assorting groups, predominantly containing large numbers of cassettes per group. These co-assorting groups consisted of different gene cassettes in stoichiometric relationship. Conservatively, we then attributed co-assorting cassettes to the gene cassette complements of single prokaryote lineages and by implication, to large integron-associated arrays. The prevalence of large arrays in the environment raises new questions about the assembly, maintenance and utility of large cassette arrays in prokaryote populations.

  18. Robustness and assortativity for diffusion-like processes in scale-free networks

    Science.gov (United States)

    D'Agostino, G.; Scala, A.; Zlatić, V.; Caldarelli, G.

    2012-03-01

    By analysing the diffusive dynamics of epidemics and of distress in complex networks, we study the effect of the assortativity on the robustness of the networks. We first determine by spectral analysis the thresholds above which epidemics/failures can spread; we then calculate the slowest diffusional times. Our results shows that disassortative networks exhibit a higher epidemiological threshold and are therefore easier to immunize, while in assortative networks there is a longer time for intervention before epidemic/failure spreads. Moreover, we study by computer simulations the sandpile cascade model, a diffusive model of distress propagation (financial contagion). We show that, while assortative networks are more prone to the propagation of epidemic/failures, degree-targeted immunization policies increases their resilience to systemic risk.

  19. Phenotypic assortment in Tetrahymena thermophila: assortment kinetics of antibiotic-resistance markers, tsA, death, and the highly amplified rDNA locus.

    Science.gov (United States)

    Merriam, E V; Bruns, P J

    1988-10-01

    Phenotypic assortment in Tetrahymena thermophila results from random distribution of alleles during amitotic division of the macronucleus. The rate of assortment is dependent on input ratio and the number of assorting units. The assortment of the antibiotic resistance markers Chx, Mpr and gal was determined and is consistent for each with the model of 45 assorting chromosomes. The gene tsA (previously ts-1) shows normal assortment, in contrast to previous reports. A mutation in the highly amplified ribosomal locus (rdnA2) assorts as if present at only 45 copies. Death of clones occurred at a rate consistent with assortment for a single gene.

  20. From sparse to dense and from assortative to disassortative in online social networks

    CERN Document Server

    Li, Menghui; Gong, Xiaofeng; Li, Kun; Wu, Jinshan; Di, Zengru; Lai, Choy-Heng

    2013-01-01

    In this paper, inspired by the analysis on several empirical online social networks, we propose a simple reaction-diffusion-like coevolving model, in which individuals are activated to create links based on their states influenced by local dynamics and their own intension. It is shown that the model can reproduce the remarkable properties observed in empirical online social networks, particularly, that the assortative coefficients are neural or negative and the power law exponents are smaller than 2. Moreover, we demonstrate that, under feasible conditions, the modeling networks naturally convert from assortative to disassortative, and from sparse to dense. Our model is helpful for understanding the formation and evolution of online social networks.

  1. Models of cultural niche construction with selection and assortative mating.

    Science.gov (United States)

    Creanza, Nicole; Fogarty, Laurel; Feldman, Marcus W

    2012-01-01

    Niche construction is a process through which organisms modify their environment and, as a result, alter the selection pressures on themselves and other species. In cultural niche construction, one or more cultural traits can influence the evolution of other cultural or biological traits by affecting the social environment in which the latter traits may evolve. Cultural niche construction may include either gene-culture or culture-culture interactions. Here we develop a model of this process and suggest some applications of this model. We examine the interactions between cultural transmission, selection, and assorting, paying particular attention to the complexities that arise when selection and assorting are both present, in which case stable polymorphisms of all cultural phenotypes are possible. We compare our model to a recent model for the joint evolution of religion and fertility and discuss other potential applications of cultural niche construction theory, including the evolution and maintenance of large-scale human conflict and the relationship between sex ratio bias and marriage customs. The evolutionary framework we introduce begins to address complexities that arise in the quantitative analysis of multiple interacting cultural traits.

  2. Models of cultural niche construction with selection and assortative mating.

    Directory of Open Access Journals (Sweden)

    Nicole Creanza

    Full Text Available Niche construction is a process through which organisms modify their environment and, as a result, alter the selection pressures on themselves and other species. In cultural niche construction, one or more cultural traits can influence the evolution of other cultural or biological traits by affecting the social environment in which the latter traits may evolve. Cultural niche construction may include either gene-culture or culture-culture interactions. Here we develop a model of this process and suggest some applications of this model. We examine the interactions between cultural transmission, selection, and assorting, paying particular attention to the complexities that arise when selection and assorting are both present, in which case stable polymorphisms of all cultural phenotypes are possible. We compare our model to a recent model for the joint evolution of religion and fertility and discuss other potential applications of cultural niche construction theory, including the evolution and maintenance of large-scale human conflict and the relationship between sex ratio bias and marriage customs. The evolutionary framework we introduce begins to address complexities that arise in the quantitative analysis of multiple interacting cultural traits.

  3. The Changing Importance of White Women's Economic Prospects for Assortative Mating

    Science.gov (United States)

    Sweeney, Megan M.; Cancian, Maria

    2004-01-01

    Given recent changes in the labor force participation and economic standing of women, we ask whether a woman's position in the labor market has become a more important determinant of her position in the marriage market. Unlike much prior research on trends over time in assortative mating, we take an individual-level approach to the analysis and…

  4. Negative-assortative mating for color in wolves.

    Science.gov (United States)

    Hedrick, Philip W; Smith, Douglas W; Stahler, Daniel R

    2016-04-01

    There is strong negative-assortative mating for gray and black pelage color in the iconic wolves in Yellowstone National Park. This is the first documented case of significant negative-assortative mating in mammals and one of only a very few cases in vertebrates. Of 261 matings documented from 1995 to 2015, 63.6% were between gray and black wolves and the correlation between mates for color was -0.266. There was a similar excess of matings of both gray males × black females and black males × gray females. Using the observed frequency of negative-assortative mating in a model with both random and negative-assortative mating, the estimated proportion of negative-assortative mating was 0.430. The estimated frequency of black wolves in the population from 1996 to 2014 was 0.452 and these frequencies appear stable over this 19-year period. Using the estimated level of negative-assortative mating, the predicted equilibrium frequency of the dominant allele was 0.278, very close to the mean value of 0.253 observed. In addition, the patterns of genotype frequencies, that is, the observed proportion of black homozygotes and the observed excess of black heterozygotes, are consistent with negative-assortative mating. Importantly these results demonstrate that negative-assortative mating could be entirely responsible for the maintenance of this well-known color polymorphism. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

  5. Educational and social class assortative mating in fertile British couples.

    Science.gov (United States)

    Krzyżanowska, Monika; Mascie-Taylor, C G Nicholas

    2014-01-01

    Positive assortative mating for education and social position has been widely reported in a number of countries, but very few studies have tested whether or not educational or social class homogamy is related to differential fertility. This study examined the relationship between educational and social class assortative mating and fertility in a British national cohort. The analyses were based on 7452 husband-wife pairs from the British National Child Development Study (NCDS). The mean fertility was 3.22 children per couple; the number of children significantly increased from higher to lower social classes and from the more educated to the less educated. The extent of assortative mating for social class and educational level was related to fertility; as educational assortative mating decreased so did the average number of children, whereas the opposite trend was observed for social class. When assortative mating for education and social class were considered together, educational assortative mating was the more significant predictor of the number of children and educationally homogamous couples had higher fertility independent of their social class assortative mating. The relationship between assortative mating and fertility for education and social class appeared to be acting in the opposite direction.

  6. Genetic and socioeconomic study of mate choice in Latinos reveals novel assortment patterns.

    Science.gov (United States)

    Zou, James Y; Park, Danny S; Burchard, Esteban G; Torgerson, Dara G; Pino-Yanes, Maria; Song, Yun S; Sankararaman, Sriram; Halperin, Eran; Zaitlen, Noah

    2015-11-01

    Nonrandom mating in human populations has important implications for genetics and medicine as well as for economics and sociology. In this study, we performed an integrative analysis of a large cohort of Mexican and Puerto Rican couples using detailed socioeconomic attributes and genotypes. We found that in ethnically homogeneous Latino communities, partners are significantly more similar in their genomic ancestries than expected by chance. Consistent with this, we also found that partners are more closely related--equivalent to between third and fourth cousins in Mexicans and Puerto Ricans--than matched random male-female pairs. Our analysis showed that this genomic ancestry similarity cannot be explained by the standard socioeconomic measurables alone. Strikingly, the assortment of genomic ancestry in couples was consistently stronger than even the assortment of education. We found enriched correlation of partners' genotypes at genes known to be involved in facial development. We replicated our results across multiple geographic locations. We discuss the implications of assortment and assortment-specific loci on disease dynamics and disease mapping methods in Latinos.

  7. Assortativity and leadership emerge from anti-preferential attachment in heterogeneous networks

    Science.gov (United States)

    Sendiña-Nadal, I.; Danziger, M. M.; Wang, Z.; Havlin, S.; Boccaletti, S.

    2016-02-01

    Real-world networks have distinct topologies, with marked deviations from purely random networks. Many of them exhibit degree-assortativity, with nodes of similar degree more likely to link to one another. Though microscopic mechanisms have been suggested for the emergence of other topological features, assortativity has proven elusive. Assortativity can be artificially implanted in a network via degree-preserving link permutations, however this destroys the graph’s hierarchical clustering and does not correspond to any microscopic mechanism. Here, we propose the first generative model which creates heterogeneous networks with scale-free-like properties in degree and clustering distributions and tunable realistic assortativity. Two distinct populations of nodes are incrementally added to an initial network by selecting a subgraph to connect to at random. One population (the followers) follows preferential attachment, while the other population (the potential leaders) connects via anti-preferential attachment: they link to lower degree nodes when added to the network. By selecting the lower degree nodes, the potential leader nodes maintain high visibility during the growth process, eventually growing into hubs. The evolution of links in Facebook empirically validates the connection between the initial anti-preferential attachment and long term high degree. In this way, our work sheds new light on the structure and evolution of social networks.

  8. Theoretical studies on the molecular structure, conformational preferences, topological and vibrational analysis of allicin

    Science.gov (United States)

    Durlak, Piotr; Berski, Sławomir; Latajka, Zdzisław

    2016-01-01

    The molecular structure, conformational preferences, topological and vibrational analysis of allicin has been investigated at two different approaches. Calculations have been carried out on static (DFT and MP2) levels with an assortment of Dunning's basis sets and dynamic CPMD simulations. In this both case within the isolated molecule approximation. The results point out that at least twenty different conformers coexist on the PES as confirmed by the flexible character of this molecule. The topological analysis of ELF showed very similar nature of the Ssbnd S and Ssbnd O bonds. The infrared spectrum has been calculated, and a comparative vibrational analysis has been performed.

  9. The role of personality and intelligence in assortative mating.

    Science.gov (United States)

    Escorial, Sergio; Martin-Buro, Carmen

    2012-07-01

    Assortative mating is the individuals' tendency to mate with those who are similar to them in some variables, at a higher rate than would be expected from random. This study aims to provide empirical evidence of assortative mating through the Big Five model of personality and two measures of intelligence using Spanish samples. The sample consisted of 244 Spanish couples. It was divided into two groups according to relationship time. The effect of age, educational level and socioeconomic status was controlled. The results showed strong assortative mating for intelligence and moderate for personality. The strongest correlations for Personality were found in Openness, Agreeableness and Conscientiousness.

  10. Assortative mating for cultural identification as indicated by language use.

    Science.gov (United States)

    Nagoshi, C T; Johnson, R C; Danko, G P

    1990-01-01

    Persons of Japanese ancestry from Hawaii who marry within their own racial/ethnic group show a significant degree of homogamous assortative mating for "pidgin" and for standard English usage, variables reflective of important cultural differences in Hawaii. Persons of Japanese ancestry who married persons of other racial/ethnic groups had less exposure to pidgin in their parental homes and were less likely to speak this dialect of English. Sibling-spouse analyses suggested that assortment for such language use is entirely due to social homogamy rather than active phenotypic assortment.

  11. Continuous microfluidic assortment of interactive ligands (CMAIL)

    Science.gov (United States)

    Hsiao, Yi-Hsing; Huang, Chao-Yang; Hu, Chih-Yung; Wu, Yen-Yu; Wu, Chung-Hsiun; Hsu, Chia-Hsien; Chen, Chihchen

    2016-08-01

    Finding an interactive ligand-receptor pair is crucial to many applications, including the development of monoclonal antibodies. Biopanning, a commonly used technique for affinity screening, involves a series of washing steps and is lengthy and tedious. Here we present an approach termed continuous microfluidic assortment of interactive ligands, or CMAIL, for the screening and sorting of antigen-binding single-chain variable antibody fragments (scFv) displayed on bacteriophages (phages). Phages carrying native negative charges on their coat proteins were electrophoresed through a hydrogel matrix functionalized with target antigens under two alternating orthogonal electric fields. During the weak horizontal electric field phase, phages were differentially swept laterally depending on their affinity for the antigen, and all phages were electrophoresed down to be collected during the strong vertical electric field phase. Phages of different affinity were spatially separated, allowing the continuous operation. More than 105 CFU (colony forming unit) antigen-interacting phages were isolated with ~100% specificity from a phage library containing 3 × 109 individual members within 40 minutes of sorting using CMAIL. CMAIL is rapid, sensitive, specific, and does not employ washing, elution or magnetic beads. In conclusion, we have developed an efficient and cost-effective method for isolating and sorting affinity reagents involving phage display.

  12. Second-Order Assortative Mixing in Social Networks

    DEFF Research Database (Denmark)

    Zhou, Shi; Cox, Ingemar; Hansen, Lars Kai

    2017-01-01

    In a social network, the number of links of a node, or node degree, is often assumed as a proxy for the node’s importance or prominence within the network. It is known that social networks exhibit the (first-order) assortative mixing, i.e. if two nodes are connected, they tend to have similar node...... degrees, suggesting that people tend to mix with those of comparable prominence. In this paper, we report the second-order assortative mixing in social networks. If two nodes are connected, we measure the degree correlation between their most prominent neighbours, rather than between the two nodes...... themselves. We observe very strong second-order assortative mixing in social networks, often significantly stronger than the first-order assortative mixing. This suggests that if two people interact in a social network, then the importance of the most prominent person each knows is very likely to be the same...

  13. Assortative mixing in functional brain networks during epileptic seizures

    CERN Document Server

    Bialonski, Stephan

    2013-01-01

    We investigate assortativity of functional brain networks before, during, and after one-hundred epileptic seizures with different anatomical onset locations. We construct binary functional networks from multi-channel electroencephalographic data recorded from 60 epilepsy patients, and from time-resolved estimates of the assortativity coefficient we conclude that positive degree-degree correlations are inherent to seizure dynamics. While seizures evolve, an increasing assortativity indicates a segregation of the underlying functional network into groups of brain regions that are only sparsely interconnected, if at all. Interestingly, assortativity decreases already prior to seizure end. Together with previous observations of characteristic temporal evolutions of global statistical properties and synchronizability of epileptic brain networks, our findings may help to gain deeper insights into the complicated dynamics underlying generation, propagation, and termination of seizures.

  14. Brief Analysis on Design of Assorted Diesel Generator System for Large Data Center%大型数据中心配套柴油发电机系统设计简析

    Institute of Scientific and Technical Information of China (English)

    严俊

    2015-01-01

    结合实际工程案例,从供配电系统、柴油发电机组的启动控制、供油系统及测试负载选择等方面简要阐述大型数据中心配套柴油发电机房设计的心得和体会。%The experience in designing assorted diesel generator system for a large data center is briefly summarized from the aspects such as the power supply and distribution system, the start control of the diesel generator set, selection of the oil supply system and test load by combining actual project case.

  15. A computer model allowing maintenance of large amounts of genetic variability in Mendelian populations. II. The balance of forces between linkage and random assortment.

    Science.gov (United States)

    Wills, C; Miller, C

    1976-02-01

    It is shown, through theory and computer simulations of outbreeding Mendelian populations, that there may be conditions under which a balance is struck between two facotrs. The first is the advantage of random assortment, which will, when multilocus selection is for intermediate equilibrium values, lead to higher average heterozygosity than when linkage is introduced. There is some indication that random assortment is also advantageous when selection is toward a uniform distribution of equilibrium values. The second factor is the advantage of linkage between loci having positive epistatic interactions. When multilocus selection is for a bimodal distribution of equilibrium values an early advantage of random assortment is replaced by a later disadvantage. Linkage disequilibrium, which in finite populations is increased only by random or selective sampling, may hinder the movement of alleles to their selective equilibria, thus leading to the advantage of random assortment.-Some consequences of this approach to the structure of natural populations are discussed.

  16. From sparse to dense and from assortative to disassortative in online social networks

    Science.gov (United States)

    Li, Menghui; Guan, Shuguang; Wu, Chensheng; Gong, Xiaofeng; Li, Kun; Wu, Jinshan; di, Zengru; Lai, Choy-Heng

    2014-05-01

    Inspired by the analysis of several empirical online social networks, we propose a simple reaction-diffusion-like coevolving model, in which individuals are activated to create links based on their states, influenced by local dynamics and their own intention. It is shown that the model can reproduce the remarkable properties observed in empirical online social networks; in particular, the assortative coefficients are neutral or negative, and the power law exponents γ are smaller than 2. Moreover, we demonstrate that, under appropriate conditions, the model network naturally makes transition(s) from assortative to disassortative, and from sparse to dense in their characteristics. The model is useful in understanding the formation and evolution of online social networks.

  17. From sparse to dense and from assortative to disassortative in online social networks.

    Science.gov (United States)

    Li, Menghui; Guan, Shuguang; Wu, Chensheng; Gong, Xiaofeng; Li, Kun; Wu, Jinshan; Di, Zengru; Lai, Choy-Heng

    2014-01-01

    Inspired by the analysis of several empirical online social networks, we propose a simple reaction-diffusion-like coevolving model, in which individuals are activated to create links based on their states, influenced by local dynamics and their own intention. It is shown that the model can reproduce the remarkable properties observed in empirical online social networks; in particular, the assortative coefficients are neutral or negative, and the power law exponents γ are smaller than 2. Moreover, we demonstrate that, under appropriate conditions, the model network naturally makes transition(s) from assortative to disassortative, and from sparse to dense in their characteristics. The model is useful in understanding the formation and evolution of online social networks.

  18. Imposing nonlinear constraints when estimating genetic and cultural transmission under assortative mating: a simulation study using Mx and BUGS

    NARCIS (Netherlands)

    van den Berg, Stéphanie Martine

    2009-01-01

    Modeling both genetic and cultural transmission in parent-offspring data in the presence of phenotypic assortment requires the imposition of nonlinear constraints. This article reports a simulation study that determined how well the structural equation modeling software package Mx and the

  19. Imposing Nonlinear Constraints When Estimating Genetic and Cultural Transmission Under Assortative Mating: A Simulation Study Using Mx and BUGS

    NARCIS (Netherlands)

    Berg, van den Stephanie M.

    2009-01-01

    Modeling both genetic and cultural transmission in parent-offspring data in the presence of phenotypic assortment requires the imposition of nonlinear constraints. This article reports a simulation study that determined how well the structural equation modeling software package Mx and the Bayesian-o

  20. An Institutional Mechanism for Assortment in an Ecology of Games

    Science.gov (United States)

    Smaldino, Paul E.; Lubell, Mark

    2011-01-01

    Recent research has revived Long's “ecology of games” model to analyze how social actors cooperate in the context of multiple political and social games. However, there is still a paucity of theoretical work that considers the mechanisms by which large-scale cooperation can be promoted in a dynamic institutional landscape, in which actors can join new games and leave old ones. This paper develops an agent-based model of an ecology of games where agents participate in multiple public goods games. In addition to contribution decisions, the agents can leave and join different games, and these processes are de-coupled. We show that the payoff for cooperation is greater than for defection when limits to the number of actors per game (“capacity constraints”) structure the population in ways that allow cooperators to cluster, independent of any complex individual-level mechanisms such as reputation or punishment. Our model suggests that capacity constraints are one effective mechanism for producing positive assortment and increasing cooperation in an ecology of games. The results suggest an important trade-off between the inclusiveness of policy processes and cooperation: Fully inclusive policy processes reduce the chances of cooperation. PMID:21850249

  1. An institutional mechanism for assortment in an ecology of games.

    Science.gov (United States)

    Smaldino, Paul E; Lubell, Mark

    2011-01-01

    Recent research has revived Long's "ecology of games" model to analyze how social actors cooperate in the context of multiple political and social games. However, there is still a paucity of theoretical work that considers the mechanisms by which large-scale cooperation can be promoted in a dynamic institutional landscape, in which actors can join new games and leave old ones. This paper develops an agent-based model of an ecology of games where agents participate in multiple public goods games. In addition to contribution decisions, the agents can leave and join different games, and these processes are de-coupled. We show that the payoff for cooperation is greater than for defection when limits to the number of actors per game ("capacity constraints") structure the population in ways that allow cooperators to cluster, independent of any complex individual-level mechanisms such as reputation or punishment. Our model suggests that capacity constraints are one effective mechanism for producing positive assortment and increasing cooperation in an ecology of games. The results suggest an important trade-off between the inclusiveness of policy processes and cooperation: Fully inclusive policy processes reduce the chances of cooperation.

  2. An institutional mechanism for assortment in an ecology of games.

    Directory of Open Access Journals (Sweden)

    Paul E Smaldino

    Full Text Available Recent research has revived Long's "ecology of games" model to analyze how social actors cooperate in the context of multiple political and social games. However, there is still a paucity of theoretical work that considers the mechanisms by which large-scale cooperation can be promoted in a dynamic institutional landscape, in which actors can join new games and leave old ones. This paper develops an agent-based model of an ecology of games where agents participate in multiple public goods games. In addition to contribution decisions, the agents can leave and join different games, and these processes are de-coupled. We show that the payoff for cooperation is greater than for defection when limits to the number of actors per game ("capacity constraints" structure the population in ways that allow cooperators to cluster, independent of any complex individual-level mechanisms such as reputation or punishment. Our model suggests that capacity constraints are one effective mechanism for producing positive assortment and increasing cooperation in an ecology of games. The results suggest an important trade-off between the inclusiveness of policy processes and cooperation: Fully inclusive policy processes reduce the chances of cooperation.

  3. Assortativity coefficient-based estimation of population patterns of sexual mixing when cluster size is informative.

    Science.gov (United States)

    Young, Siobhan K; Lyles, Robert H; Kupper, Lawrence L; Keys, Jessica R; Martin, Sandra L; Costenbader, Elizabeth C

    2014-06-01

    Population sexual mixing patterns can be quantified using Newman's assortativity coefficient (r). Suggested methods for estimating the SE for r may lead to inappropriate statistical conclusions in situations where intracluster correlation is ignored and/or when cluster size is predictive of the response. We describe a computer-intensive, but highly accessible, within-cluster resampling approach for providing a valid large-sample estimated SE for r and an associated 95% CI. We introduce needed statistical notation and describe the within-cluster resampling approach. Sexual network data and a simulation study were employed to compare within-cluster resampling with standard methods when cluster size is informative. For the analysis of network data when cluster size is informative, the simulation study demonstrates that within-cluster resampling produces valid statistical inferences about Newman's assortativity coefficient, a popular statistic used to quantify the strength of mixing patterns. In contrast, commonly used methods are biased with attendant extremely poor CI coverage. Within-cluster resampling is recommended when cluster size is informative and/or when there is within-cluster response correlation. Within-cluster resampling is recommended for providing valid statistical inferences when applying Newman's assortativity coefficient r to network data. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  4. Review: Game theory of public goods in one-shot social dilemmas without assortment.

    Science.gov (United States)

    Archetti, Marco; Scheuring, István

    2012-04-21

    We review the theory of public goods in biology. In the N-person prisoner's dilemma, where the public good is a linear function of the individual contributions, cooperation requires some form of assortment, for example due to kin discrimination, population viscosity or repeated interactions. In most social species ranging from bacteria to humans, however, public goods are usually a non-linear function of the contributions, which makes cooperation possible without assortment. More specifically, a polymorphic state can be stable in which cooperators and non-cooperators coexist. The existence of mixed equilibria in public goods games is a fundamental result in the study of cooperation that has been overlooked so far, because of the disproportionate attention given to the two- and N-person prisoner's dilemma. Methods and results from games with pairwise interactions or linear benefits cannot, in general, be extended to the analysis of public goods. Game theory helps explain the production of public goods in one-shot, N-person interactions without assortment, it leads to predictions that can be easily tested and allows a prescriptive approach to cooperation.

  5. Emergence of scaling and assortative mixing through altruism

    Science.gov (United States)

    Li, Ping; Zhang, Jie; Small, Michael

    2011-06-01

    Many social networks, apart from displaying scale-free characteristics observed in some instances, possess another remarkable feature that distinguishes them from those that appear in biological and technological context-assortativity. However, little or no attention has been payed to the mechanism of assortativity in modeling these networks. Inspired by individuals' altruistic behavior in sociology, we develop a model with a different growth mechanism called “altruistic attachment”, which can reproduce not only the power law degree distribution but degree correlations. We study in detail the statistical properties of our network model, which we also demonstrate striking differences with the BA model, and can portray real social networks more precisely.

  6. Geometric Assortative Growth Model for Small-World Networks

    Directory of Open Access Journals (Sweden)

    Yilun Shang

    2014-01-01

    Full Text Available It has been shown that both humanly constructed and natural networks are often characterized by small-world phenomenon and assortative mixing. In this paper, we propose a geometrically growing model for small-world networks. The model displays both tunable small-world phenomenon and tunable assortativity. We obtain analytical solutions of relevant topological properties such as order, size, degree distribution, degree correlation, clustering, transitivity, and diameter. It is also worth noting that the model can be viewed as a generalization for an iterative construction of Farey graphs.

  7. Geometric assortative growth model for small-world networks.

    Science.gov (United States)

    Shang, Yilun

    2014-01-01

    It has been shown that both humanly constructed and natural networks are often characterized by small-world phenomenon and assortative mixing. In this paper, we propose a geometrically growing model for small-world networks. The model displays both tunable small-world phenomenon and tunable assortativity. We obtain analytical solutions of relevant topological properties such as order, size, degree distribution, degree correlation, clustering, transitivity, and diameter. It is also worth noting that the model can be viewed as a generalization for an iterative construction of Farey graphs.

  8. Structural analysis for Diagnosis

    DEFF Research Database (Denmark)

    Izadi-Zamanabadi, Roozbeh; Blanke, M.

    2001-01-01

    Aiming at design of algorithms for fault diagnosis, structural analysis of systems offers concise yet easy overall analysis. Graph-based matching, which is the essential technique to obtain redundant information for diagnosis, is re-considered in this paper. Matching is re-formulated as a problem...

  9. Structural analysis for diagnosis

    DEFF Research Database (Denmark)

    Izadi-Zamanabadi, Roozbeh; Blanke, M.

    2002-01-01

    Aiming at design of algorithms for fault diagnosis, structural analysis of systems offers concise yet easy overall analysis. Graph-based matching, which is the essential tech-nique to obtain redundant information for diagnosis, is reconsidered in this paper. Matching is reformulated as a problem...

  10. Probabilistic Structural Analysis Program

    Science.gov (United States)

    Pai, Shantaram S.; Chamis, Christos C.; Murthy, Pappu L. N.; Stefko, George L.; Riha, David S.; Thacker, Ben H.; Nagpal, Vinod K.; Mital, Subodh K.

    2010-01-01

    NASA/NESSUS 6.2c is a general-purpose, probabilistic analysis program that computes probability of failure and probabilistic sensitivity measures of engineered systems. Because NASA/NESSUS uses highly computationally efficient and accurate analysis techniques, probabilistic solutions can be obtained even for extremely large and complex models. Once the probabilistic response is quantified, the results can be used to support risk-informed decisions regarding reliability for safety-critical and one-of-a-kind systems, as well as for maintaining a level of quality while reducing manufacturing costs for larger-quantity products. NASA/NESSUS has been successfully applied to a diverse range of problems in aerospace, gas turbine engines, biomechanics, pipelines, defense, weaponry, and infrastructure. This program combines state-of-the-art probabilistic algorithms with general-purpose structural analysis and lifting methods to compute the probabilistic response and reliability of engineered structures. Uncertainties in load, material properties, geometry, boundary conditions, and initial conditions can be simulated. The structural analysis methods include non-linear finite-element methods, heat-transfer analysis, polymer/ceramic matrix composite analysis, monolithic (conventional metallic) materials life-prediction methodologies, boundary element methods, and user-written subroutines. Several probabilistic algorithms are available such as the advanced mean value method and the adaptive importance sampling method. NASA/NESSUS 6.2c is structured in a modular format with 15 elements.

  11. A framework for analyzing contagion in assortative banking networks.

    Science.gov (United States)

    Hurd, Thomas R; Gleeson, James P; Melnik, Sergey

    2017-01-01

    We introduce a probabilistic framework that represents stylized banking networks with the aim of predicting the size of contagion events. Most previous work on random financial networks assumes independent connections between banks, whereas our framework explicitly allows for (dis)assortative edge probabilities (i.e., a tendency for small banks to link to large banks). We analyze default cascades triggered by shocking the network and find that the cascade can be understood as an explicit iterated mapping on a set of edge probabilities that converges to a fixed point. We derive a cascade condition, analogous to the basic reproduction number R0 in epidemic modelling, that characterizes whether or not a single initially defaulted bank can trigger a cascade that extends to a finite fraction of the infinite network. This cascade condition is an easily computed measure of the systemic risk inherent in a given banking network topology. We use percolation theory for random networks to derive a formula for the frequency of global cascades. These analytical results are shown to provide limited quantitative agreement with Monte Carlo simulation studies of finite-sized networks. We show that edge-assortativity, the propensity of nodes to connect to similar nodes, can have a strong effect on the level of systemic risk as measured by the cascade condition. However, the effect of assortativity on systemic risk is subtle, and we propose a simple graph theoretic quantity, which we call the graph-assortativity coefficient, that can be used to assess systemic risk.

  12. Lilium: breeding history of the modern cultivated assortment

    NARCIS (Netherlands)

    Tuyl, van J.M.; Arens, P.

    2011-01-01

    During the last 50 years the lily has become worldwide one of the most important flower bulbs and cut flowers. They are mainly cultivated in The Netherlands with bulb production acreage of more than 5000 ha. The assortment of lilies consists of thousands of cultivars which can be classified in diffe

  13. [Influence of seedling assortment on Panax notoginseng growth and yield].

    Science.gov (United States)

    Cui, X; Wang, C; Chen, Z

    1998-02-01

    Making Panax notoginseng seedling assortment according to seedling size before transplanting, the result shows that the influence is better, the yield of root tuber and fruit is higher. Culturing good seedling is the fundamental measure to increase yield of P. notoginseng.

  14. The Variety of An Assortment : An Extension to the Attribute-Based Approach

    NARCIS (Netherlands)

    Herpen, van H.W.I.; Pieters, F.G.M.

    2002-01-01

    In recent years, interest in category management has surged, and as a consequence, large retailers now systematically review their product assortments. Variety is a key property of assortments. Assortment variety can determine consumers' store choice and is only gaining in importance with today's in

  15. Molecular Assortment of Lens Species with Different Adaptations to Drought Conditions Using SSR Markers.

    Directory of Open Access Journals (Sweden)

    Dharmendra Singh

    Full Text Available The success of drought tolerance breeding programs can be enhanced through molecular assortment of germplasm. This study was designed to characterize molecular diversity within and between Lens species with different adaptations to drought stress conditions using SSR markers. Drought stress was applied at seedling stage to study the effects on morpho-physiological traits under controlled condition, where tolerant cultivars and wilds showed 12.8-27.6% and 9.5-23.2% reduction in seed yield per plant respectively. When juxtaposed to field conditions, the tolerant cultivars (PDL-1 and PDL-2 and wild (ILWL-314 and ILWL-436 accessions showed 10.5-26.5% and 7.5%-15.6% reduction in seed yield per plant, respectively under rain-fed conditions. The reductions in seed yield in the two tolerant cultivars and wilds under severe drought condition were 48-49% and 30.5-45.3% respectively. A set of 258 alleles were identified among 278 genotypes using 35 SSR markers. Genetic diversity and polymorphism information contents varied between 0.321-0.854 and 0.299-0.836, with mean value of 0.682 and 0.643, respectively. All the genotypes were clustered into 11 groups based on SSR markers. Tolerant genotypes were grouped in cluster 6 while sensitive ones were mainly grouped into cluster 7. Wild accessions were separated from cultivars on the basis of both population structure and cluster analysis. Cluster analysis has further grouped the wild accessions on the basis of species and sub-species into 5 clusters. Physiological and morphological characters under drought stress were significantly (P = 0.05 different among microsatellite clusters. These findings suggest that drought adaptation is variable among wild and cultivated genotypes. Also, genotypes from contrasting clusters can be selected for hybridization which could help in evolution of better segregants for improving drought tolerance in lentil.

  16. Molecular Assortment of Lens Species with Different Adaptations to Drought Conditions Using SSR Markers.

    Science.gov (United States)

    Singh, Dharmendra; Singh, Chandan Kumar; Tomar, Ram Sewak Singh; Taunk, Jyoti; Singh, Ranjeet; Maurya, Sadhana; Chaturvedi, Ashish Kumar; Pal, Madan; Singh, Rajendra; Dubey, Sarawan Kumar

    2016-01-01

    The success of drought tolerance breeding programs can be enhanced through molecular assortment of germplasm. This study was designed to characterize molecular diversity within and between Lens species with different adaptations to drought stress conditions using SSR markers. Drought stress was applied at seedling stage to study the effects on morpho-physiological traits under controlled condition, where tolerant cultivars and wilds showed 12.8-27.6% and 9.5-23.2% reduction in seed yield per plant respectively. When juxtaposed to field conditions, the tolerant cultivars (PDL-1 and PDL-2) and wild (ILWL-314 and ILWL-436) accessions showed 10.5-26.5% and 7.5%-15.6% reduction in seed yield per plant, respectively under rain-fed conditions. The reductions in seed yield in the two tolerant cultivars and wilds under severe drought condition were 48-49% and 30.5-45.3% respectively. A set of 258 alleles were identified among 278 genotypes using 35 SSR markers. Genetic diversity and polymorphism information contents varied between 0.321-0.854 and 0.299-0.836, with mean value of 0.682 and 0.643, respectively. All the genotypes were clustered into 11 groups based on SSR markers. Tolerant genotypes were grouped in cluster 6 while sensitive ones were mainly grouped into cluster 7. Wild accessions were separated from cultivars on the basis of both population structure and cluster analysis. Cluster analysis has further grouped the wild accessions on the basis of species and sub-species into 5 clusters. Physiological and morphological characters under drought stress were significantly (P = 0.05) different among microsatellite clusters. These findings suggest that drought adaptation is variable among wild and cultivated genotypes. Also, genotypes from contrasting clusters can be selected for hybridization which could help in evolution of better segregants for improving drought tolerance in lentil.

  17. Structural dynamics analysis

    Science.gov (United States)

    Housner, J. M.; Anderson, M.; Belvin, W.; Horner, G.

    1985-01-01

    Dynamic analysis of large space antenna systems must treat the deployment as well as vibration and control of the deployed antenna. Candidate computer programs for deployment dynamics, and issues and needs for future program developments are reviewed. Some results for mast and hoop deployment are also presented. Modeling of complex antenna geometry with conventional finite element methods and with repetitive exact elements is considered. Analytical comparisons with experimental results for a 15 meter hoop/column antenna revealed the importance of accurate structural properties including nonlinear joints. Slackening of cables in this antenna is also a consideration. The technology of designing actively damped structures through analytical optimization is discussed and results are presented.

  18. Structural Analysis Made 'NESSUSary'

    Science.gov (United States)

    2005-01-01

    Everywhere you look, chances are something that was designed and tested by a computer will be in plain view. Computers are now utilized to design and test just about everything imaginable, from automobiles and airplanes to bridges and boats, and elevators and escalators to streets and skyscrapers. Computer-design engineering first emerged in the 1970s, in the automobile and aerospace industries. Since computers were in their infancy, however, architects and engineers during the time were limited to producing only designs similar to hand-drafted drawings. (At the end of 1970s, a typical computer-aided design system was a 16-bit minicomputer with a price tag of $125,000.) Eventually, computers became more affordable and related software became more sophisticated, offering designers the "bells and whistles" to go beyond the limits of basic drafting and rendering, and venture into more skillful applications. One of the major advancements was the ability to test the objects being designed for the probability of failure. This advancement was especially important for the aerospace industry, where complicated and expensive structures are designed. The ability to perform reliability and risk assessment without using extensive hardware testing is critical to design and certification. In 1984, NASA initiated the Probabilistic Structural Analysis Methods (PSAM) project at Glenn Research Center to develop analysis methods and computer programs for the probabilistic structural analysis of select engine components for current Space Shuttle and future space propulsion systems. NASA envisioned that these methods and computational tools would play a critical role in establishing increased system performance and durability, and assist in structural system qualification and certification. Not only was the PSAM project beneficial to aerospace, it paved the way for a commercial risk- probability tool that is evaluating risks in diverse, down- to-Earth application

  19. Structural analysis of biodiversity.

    Science.gov (United States)

    Sirovich, Lawrence; Stoeckle, Mark Y; Zhang, Yu

    2010-02-24

    Large, recently-available genomic databases cover a wide range of life forms, suggesting opportunity for insights into genetic structure of biodiversity. In this study we refine our recently-described technique using indicator vectors to analyze and visualize nucleotide sequences. The indicator vector approach generates correlation matrices, dubbed Klee diagrams, which represent a novel way of assembling and viewing large genomic datasets. To explore its potential utility, here we apply the improved algorithm to a collection of almost 17,000 DNA barcode sequences covering 12 widely-separated animal taxa, demonstrating that indicator vectors for classification gave correct assignment in all 11,000 test cases. Indicator vector analysis revealed discontinuities corresponding to species- and higher-level taxonomic divisions, suggesting an efficient approach to classification of organisms from poorly-studied groups. As compared to standard distance metrics, indicator vectors preserve diagnostic character probabilities, enable automated classification of test sequences, and generate high-information density single-page displays. These results support application of indicator vectors for comparative analysis of large nucleotide data sets and raise prospect of gaining insight into broad-scale patterns in the genetic structure of biodiversity.

  20. Evidence that avian reovirus σNS is an RNA chaperone: implications for genome segment assortment.

    Science.gov (United States)

    Borodavka, Alexander; Ault, James; Stockley, Peter G; Tuma, Roman

    2015-08-18

    Reoviruses are important human, animal and plant pathogens having 10-12 segments of double-stranded genomic RNA. The mechanisms controlling the assortment and packaging of genomic segments in these viruses, remain poorly understood. RNA-protein and RNA-RNA interactions between viral genomic segment precursors have been implicated in the process. While non-structural viral RNA-binding proteins, such as avian reovirus σNS, are essential for virus replication, the mechanism by which they assist packaging is unclear. Here we demonstrate that σNS assembles into stable elongated hexamers in vitro, which bind single-stranded nucleic acids with high affinity, but little sequence specificity. Using ensemble and single molecule fluorescence spectroscopy, we show that σNS also binds to a partially double-stranded RNA, resulting in gradual helix unwinding. The hexamer can bind multiple RNA molecules and exhibits strand-annealing activity, thus mediating conversion of metastable, intramolecular stem-loops into more stable heteroduplexes. We demonstrate that the ARV σNS acts as an RNA chaperone facilitating specific RNA-RNA interactions between genomic precursors during segment assortment and packaging.

  1. Spreading dynamics in heterogeneous graphs: Beyond the assortativity coefficient

    Science.gov (United States)

    Sugarelli, Michele; Vergni, Davide

    2017-02-01

    We study spreading dynamics of a reaction-diffusion process in a special class of heterogeneous graphs with Poissonian degree distribution and composed of both local and long range links. The behavior of the spreading dynamics on such networks are investigated by relating them to the topological features of graphs. We find that the degree of assortativity can give just some indication about the large scale behavior of the spreading dynamics while a detailed description of the process can be addressed by introducing new, more appropriate, topological quantities linked to the distance between nodes.

  2. Reconsidering the heritability of intelligence in adulthood: taking assortative mating and cultural transmission into account.

    Science.gov (United States)

    Vinkhuyzen, Anna A E; van der Sluis, Sophie; Maes, Hermine H M; Posthuma, Danielle

    2012-03-01

    Heritability estimates of general intelligence in adulthood generally range from 75 to 85%, with all heritability due to additive genetic influences, while genetic dominance and shared environmental factors are absent, or too small to be detected. These estimates are derived from studies based on the classical twin design and are based on the assumption of random mating. Yet, considerable positive assortative mating has been reported for general intelligence. Unmodeled assortative mating may lead to biased estimates of the relative magnitude of genetic and environmental factors. To investigate the effects of assortative mating on the estimates of the variance components of intelligence, we employed an extended twin-family design. Psychometric IQ data were available for adult monozygotic and dizygotic twins, their siblings, the partners of the twins and siblings, and either the parents or the adult offspring of the twins and siblings (N = 1314). Two underlying processes of assortment were considered: phenotypic assortment and social homogamy. The phenotypic assortment model was slightly preferred over the social homogamy model, suggesting that assortment for intelligence is mostly due to a selection of mates on similarity in intelligence. Under the preferred phenotypic assortment model, the variance of intelligence in adulthood was not only due to non-shared environmental (18%) and additive genetic factors (44%) but also to non-additive genetic factors (27%) and phenotypic assortment (11%).This non-additive nature of genetic influences on intelligence needs to be accommodated in future GWAS studies for intelligence.

  3. The role of active assortment in spousal similarity.

    Science.gov (United States)

    Watson, David; Beer, Andrew; McDade-Montez, Elizabeth

    2014-04-01

    Previous research has established the existence of active assortment, that is, a preference for similarity in a potential mate. Few studies, however, have directly related mate preferences to dyadic similarity by examining them in the same participants. We collected both similarity and mate preference data in two studies: undergraduate students (N = 519) and newlyweds (N = 335). In both studies, women placed a higher value on desirable personality characteristics (e.g., higher Conscientiousness and Agreeableness, lower Neuroticism) than did men. Nevertheless, our data also provided strong evidence of consensual mate preferences: Men and women both desired partners who were agreeable, conscientious, emotionally stable, intelligent, and physically attractive; furthermore, participants desired partners who were better (e.g., more agreeable and attractive) than they were. In contrast, attitudinal variables such as religiousness and political orientation displayed much weaker consensus but showed significant dyadic similarity in both samples; similarity coefficients for personality tended to be positive, but lower. Finally, analyses revealed a direct link between actual and desired similarity: Couples displayed the strongest similarity on those variables for which participants expressed the strongest preference for similarity. Our findings strongly suggest that active assortment is partly responsible for dyadic similarity.

  4. Explosive Synchronization and Emergence of Assortativity on Adaptive Networks

    Institute of Scientific and Technical Information of China (English)

    JIANG Hui-Jun; WU Hao; HOU Zhong-Huai

    2011-01-01

    @@ We report an explosive transition from incoherence to synchronization of coupled phase oscillators on adaptive networks,following an Achlioptas process based on dynamic clustering information.During each adaptive step of the network topology,a portion of the links is randomly removed and the same amount of new links is generated following the so-called product rules(PRs) applied to the dynamic clusters.Particularly,two types of PRs are considered,namely,the min-PR and max-PR.We demonstrate that the synchronization transition becomes explosive in both cases.Interestingly,we find that the min-PR rule can lead to disassortativity of the network topology,while the max-PR rule leads to assortativity.%We report an explosive transition from incoherence to synchronization of coupled phase oscillators on adaptive networks, following an Achlioptas process based on dynamic clustering information. During each adaptive step of the network topology, a portion of the links is randomly removed and the same amount of new links is generated following the so-called product rules (PRs) applied to the dynamic clusters. Particularly, two types of PRs are considered, namely, the min-PR and max-PR. We demonstrate that the synchronization transition becomes explosive in both cases. Interestingly, we find that the min-PR rule can lead to disassortativity of the network topology, while the max-PR rule leads to assortativity.

  5. SPECIFIC MARKETING STUDIES OF ASSORTMENT OF DIURETIC DRUGS IN PYATIGORSK PHARMACIES

    Directory of Open Access Journals (Sweden)

    E. V. Kleychuk

    2014-01-01

    Full Text Available Diuretics are ones of the most popular classes of antihypertensive remedies. They are characterized by low cost, high efficiency, and a good acceptability. Therefore the purpose of the research was to study an assortment of diuretics and to develop merchandise inventory of a pharmacy organization to improve quality of population drug supply. During the research we used methods of system, economic and statistic analysis, questioning, content-analysis and ABCanalysis. The research resulted on three groups of diuretic remedies depending on the specific density in general revenues from realization of these drugs group A. Group B amounted to 29.3% of the turnover. The rest 13 names were included in a Group C, their share was 29.4% of an amount of diuretics drugs. Pharmacy should always have drugs from the groups A and B.

  6. Manufacturer and retailer brands in food retail assortments: Notes from a shopping trip across Europe

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Grunert, Klaus G.; Bech-Larsen, Tino

    in the area of retail brands and even less about the interaction between retailer brands and manufacturer brands. In contrast, this paper develops a concept of retailer brand architecture, which captures that retailers typically offer an assortment of manu-facturer brands, retailer brands and generic products...... depends on the context; for instance, what other products are offered in the product category and in the retail outlet, previous experiences with the product or other products from the same manufacturer, as well as previous experiences with the retailer in question. In this paper, we take the concept...... of 'retailer brand archi-tecture', we use this concept to investigate the brand architecture of a number of European food retailers in order to determine similarities and differences in brand architecture strategies. The paper is structured as follows: firstly, the concept of brand archi-tecture is presented...

  7. Methods of forming and realization of assortment policy of retail business enterprises

    Directory of Open Access Journals (Sweden)

    Kudenko Kiril

    2016-07-01

    Full Text Available Within the framework of the article systematisation of methods of forming and realisation of assortment policy of enterprises of retail business is done. Recommendations concerning the priority of the use of separate methods of forming and realisation of assortment policy with different purposes, taking into account their content, advantages and disadvantages are developed.

  8. Innovative approaches to the prices management within the framework of product assortment

    Directory of Open Access Journals (Sweden)

    O.I. Laburtseva

    2011-03-01

    Full Text Available The article is devoted to the development of methodical recommendations on a products prices management with presence of substitution or complementation connections in the product assortment. The variants of product intercommunications in the assortment of enterprise are systematized, the proper methodical approaches to pricing are recommended and the results of business-approbation of recommendations are presented.

  9. Structures and their analysis

    CERN Document Server

    Fuchs, Maurice Bernard

    2016-01-01

    Addressing structures, this book presents a classic discipline in a modern setting by combining illustrated examples with insights into the solutions. It is the fruit of the author’s many years of teaching the subject and of just as many years of research into the design of optimal structures. Although intended for an advanced level of instruction it has an undergraduate course at its core. Further, the book was written with the advantage of having massive computer power in the background, an aspect which changes the entire approach to many engineering disciplines and in particular to structures. This paradigm shift has dislodged the force (flexibility) method from its former prominence and paved the way for the displacement (stiffness) method, despite the multitude of linear equations it spawns. In this book, however, both methods are taught: the force method offers a perfect vehicle for understanding structural behavior, bearing in mind that it is the displacement method which does the heavy number crunch...

  10. Predation risk as a driving force for phenotypic assortment: a cross-population comparison.

    Science.gov (United States)

    Croft, D P; Darden, S K; Ruxton, G D

    2009-05-22

    Frequency-dependent predation has been proposed as a general mechanism driving the phenotypic assortment of social groups via the 'oddity effect', which occurs when the presence of odd individuals in a group allows a predator to fixate on a single prey item, increasing the predator's attack-to-kill ratio. However, the generality of the oddity effect has been debated and, previously, there has not been an ecological assessment of the role of predation risk in driving the phenotypic assortment of social groups. Here, we compare the levels of body length assortment of social groups between populations of the Trinidadian guppy (Poecilia reticulata) that experience differences in predation risk. As predicted by the oddity effect hypothesis, we observe phenotypic assortment by body length to be greater under high predation risk. However, we found that a number of low-predation populations were also significantly assorted by body length, suggesting that other mechanisms may have a role to play.

  11. Structured Analysis - IDEF0

    DEFF Research Database (Denmark)

    Larsen, Michael Holm

    1999-01-01

    that require a modelling technique for the analysis, development, re-engineering, integration, or acquisition of information systems; and incorporate a systems or enterprise modelling technique into a business process analysis or software engineering methodology.This note is a summary of the Standard...

  12. A framework for analyzing contagion in assortative banking networks

    CERN Document Server

    Hurd, Thomas R; Melnik, Sergey

    2016-01-01

    We introduce a probabilistic framework that represents stylized banking networks with the aim of predicting the size of contagion events. Most previous work on random financial networks assumes independent connections between banks, whereas our framework explicitly allows for (dis)assortative edge probabilities (e.g., a tendency for small banks to link to large banks). We analyze default cascades triggered by shocking the network and find that the cascade can be understood as an explicit iterated mapping on a set of edge probabilities that converges to a fixed point. We derive a cascade condition that characterizes whether or not an infinitesimal shock to the network can grow to a finite size cascade, in analogy to the basic reproduction number $R_0$ in epidemic modelling. The cascade condition provides an easily computed measure of the systemic risk inherent in a given banking network topology. Using the percolation theory for random networks we also derive an analytic formula for the frequency of global cas...

  13. THE DESIGN AND ANALYSIS OF VIBRATION STRUCTURE OF VERTICAL DYNAMIC BALANCING MACHINE

    Institute of Scientific and Technical Information of China (English)

    LiDinggen; CaoJiguang; WangJtmwen; ChenChuanyao

    2004-01-01

    A new type of vibration structure (i.e. supporting system, called swing frame customarily) of vertical dynamic balancing machine has been designed, which is based on an analysis for the swing frame of a traditional double-plane vertical dynamic balancing machine. The static unbalance and couple unbalance can be effectively separated by using the new dynamic balancing machine with the new swing frame. By building the dynamics model, the advantages of the new structure are discussed in detail. The modal and harmonic response are analyzed by using the ANSYS7.0. By comparing the finite element modal analysis with the experimental modal analysis, the natural frequencies and vibration modes are found. There are many spring boards in the new swing frame. Their stiffnesses are different and assorted with each other. Furthermore, there are three sensors on the measuring points. Therefore, the new dynamic balancing machine can measure static unbalance and coupling unbalance directly, and the interaction between them is faint. The result shows that the new vertical dynamic balancing machine is suitable for inertial measurement of flying objects, and can overcome the shortcomings of traditional double-plane vertical dynamic balancing machines, which the effect of plane-separation is inferior. The vertical dynamic balancing machine with the new vibration structure can find wide application in the future. The modelling and analysis of the new vibration structure will provide theoretical basis and practical experience for designing new-type vertical dynamic balancing machines.

  14. Imposing nonlinear constraints when estimating genetic and cultural transmission under assortative mating: a simulation study using Mx and BUGS.

    Science.gov (United States)

    van den Berg, Stéphanie M

    2009-01-01

    Modeling both genetic and cultural transmission in parent-offspring data in the presence of phenotypic assortment requires the imposition of nonlinear constraints. This article reports a simulation study that determined how well the structural equation modeling software package Mx and the Bayesian-oriented BUGS software package can handle such nonlinear constraints under various conditions. Results generally showed good and comparable results for Mx and BUGS, although BUGS was much slower than Mx. However, since BUGS uses Markov-chain Monte Carlo estimation it could be used for parent-offspring models with non-normal data and/or item-response theory models.

  15. Determination of timber assortments obtainable from coppice chestnut stands (Susa Valley, Northern Italy

    Directory of Open Access Journals (Sweden)

    Nosenzo A

    2007-01-01

    Full Text Available Chestnut (Castanea sativa L. coppice stands currently cover about 195.000 ha of Piedmont (North-Western Italy surface, corresponding to 22.4 % of the overall forested area in the region. Most of these forest stands are usually older than the typical rotation period. As a consequence from these stands timber assortments with a higher value could be obtained. The purpose of this study is to assess the amount of timber assortments and to propose a sorting methodology based on measurements on standing trees within these chestnut stands.Five study areas were selected in the Susa Valley, where forest measurements were realized within sampling plots. Timber assortments obtainable from each coppice shoot were then determined by means of the Bitterlich’s relascope. More than 1.000 timber logs were measured. The data elaboration allowed to assess the timber assortment production of the investigated stands. The proposed methodology makes it possible to better exploit timber assortments. In fact, while usually the whole production from chestnut coppices is directly destined to secondary products, the subdivision into assortments could result in a 20 % of products with higher commercial value. It is important to notice that within these stands no tending operation is currently realized. The definition of qualitative features to classify timber assortments can provide useful suggestions on the main yield targets that could be reached through silvicultural management.

  16. Collapse Analysis of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2008-01-01

    A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...... of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... be fulfilled: a) demonstrating that those parts of the structure essential for the safety only have little sensitivity with respect to unintentional loads and defects, or b) demonstrating a load case with „removal of a limited part of the structure‟ in order to document that an extensive failure...

  17. Thai Rhetorical Structure Analysis

    CERN Document Server

    Sinthupoun, Somnuk

    2010-01-01

    A rhetorical structure tree (RS tree) is a representation of discourse relations among elementary discourse units (EDUs). A RS tree is very useful to many text processing tasks employing relationships among EDUs such as text understanding, summarization, and question answering. Thai language with its unique linguistic characteristics requires a unique RS tree construction technique. This paper proposes an approach for Thai RS tree construction which consists of three major steps: EDU segmentation, Thai RS tree construction, and discourse relation (DR) identification. Two hidden markov models derived from grammatical rules are used to segment EDUs, a clustering technique with its similarity measure derived from Thai semantic rules is used to construct a Thai RS tree, and a decision tree whose features extracted from the rules is used to determine the DR between EDUs. The proposed technique is evaluated using three Thai corpora. The results show the Thai RS tree construction and the DR identification effectiven...

  18. Regularized Generalized Structured Component Analysis

    Science.gov (United States)

    Hwang, Heungsun

    2009-01-01

    Generalized structured component analysis (GSCA) has been proposed as a component-based approach to structural equation modeling. In practice, GSCA may suffer from multi-collinearity, i.e., high correlations among exogenous variables. GSCA has yet no remedy for this problem. Thus, a regularized extension of GSCA is proposed that integrates a ridge…

  19. Reovirus genome segment assortment into progeny genomes studied by the use of monoclonal antibodies directed against reovirus proteins.

    Science.gov (United States)

    Antczak, J B; Joklik, W K

    1992-04-01

    Using a panel of monoclonal antibodies (MABs) against reovirus proteins, we have identified proteins that associate with reovirus messenger RNA molecules prior to the generation of progeny double-stranded (ds) genome segments and proteins that are components of the structures within which progeny ds genome segments are generated. The following conclusions can be drawn from the results obtained. (1) Three proteins rapidly become associated with mRNA molecules to form single-stranded RNA-containing complexes (ssRCCs): the nonstructural protein microNS, the nonstructural protein sigma NS, and protein sigma 3. (2) Analysis of populations of ssRCCs in density gradients and by sequential exposure to various MABs indicates that some ssRCCs contain only microNS, others microNS and sigma NS or sigma 3, and others all three proteins. Each ssRCC contains one RNA molecule and, depending on the size of the RNA, 10-30 protein molecules. (3) The relative proportions of the individual RNA species in the ssRCC populations reflect the composition of the total mRNA population present in infected cells (which differs substantially from equimolarity). (4) RCCs that contain dsRNA, which become detectable as early as 4 hr after infection, contain not only microNS, sigma NS, and sigma 3, but also lambda 2. (5) The relative proportions of the 10 genome segments in dsRCCs are equimolar. This suggests that genome segment assortment into progeny genomes is linked to the transcription of plus strands into minus strands.

  20. Recombination and assortment in the macronucleus of Tetrahymena thermophila: a theoretical study by computer simulation.

    Science.gov (United States)

    Doerder, F P; Diblasi, S L

    1984-12-01

    The compound nature of the macronucleus of Tetrahymena thermophila presents multiple opportunities for recombination between genes on the same macronuclear chromosome. Such recombinants should be detectable through their assortment at subsequent amitotic macronuclear divisions. Thus, a macronucleus that is initially AB/ab should produce recombinant assortees of the genotypes Ab/aB. Computer simulation shows that, when the recombination frequency is two or fewer times per cell cycle, recombinant assortees are produced at experimentally measurable frequencies of less than 40%. At higher recombination frequencies, linked genes appear to assort independently. The simulations also show that recombination during macronuclear development can be distinguished from recombination in subsequent cell cycles only if the first appearance of recombinant assortees is 100 or more fissions after conjugation. The use of macronuclear recombination and assortment as a means of mapping macronuclear genes is severely constrained by the large variances in assortment outcomes; with experimentally small sample sizes, such mapping is impossible.

  1. Understanding the Impact of Brand Delistings on Assortment Evaluations and Store Switching and Complaining Intentions

    NARCIS (Netherlands)

    L.M. Sloot (Laurens); P.C. Verhoef (Peter)

    2004-01-01

    textabstractRecently, retailers have begun considering which brands they can delist without reducing customer satisfaction, losing category sales, or increasing store switching behavior. Although several studies have considered assortment reductions, none has explicitly investigated the impact of to

  2. Actuality of assortment policy in the modern management of retail business enterprise

    Directory of Open Access Journals (Sweden)

    Yefimova Yevheniia

    2016-07-01

    Full Text Available In the result of research it has been found, that the assortment policy defines the course of actions for managing a point-of-sale assortment which foresees clarification and specification of strategic purpose and current tasks; development and grounding of facilities, methods and forms of activity for their achievement; determination of the real resources providing the realization of the plan. The constituents of assortment policy of enterprise of retail business are identified. It is well-proved that with the help of assortment policy achievement of ultimate goals of an enterprise is provided, the constituents of commercial strategy associate together and the possibility of the most effective usage of resources has arrived.

  3. 76 FR 14115 - Culturally Significant Objects Imported for Exhibition Determinations: “Assorted Greek and Roman...

    Science.gov (United States)

    2011-03-15

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF STATE Culturally Significant Objects Imported for Exhibition Determinations: ``Assorted Greek and Roman Objects... Greek and Roman Objects'' imported from abroad for temporary exhibition within the United States, are...

  4. Assortativity and leadership emergence from anti-preferential attachment in heterogeneous networks

    CERN Document Server

    Sendiña-Nadal, I; Wang, Z; Havlin, S; Boccaletti, S

    2015-01-01

    Many real-world networks exhibit degree-assortativity, with nodes of similar degree more likely to link to one another. Particularly in social networks, the contribution to the total assortativity varies with degree, featuring a distinctive peak slightly past the average degree. The way traditional models imprint assortativity on top of pre-defined topologies is via degree-preserving link permutations, which however destroy the particular graph's hierarchical traits of clustering. Here, we propose the first generative model which creates heterogeneous networks with scale-free-like properties and tunable realistic assortativity. In our approach, two distinct populations of nodes are added to an initial network seed: one (the followers) that abides by usual preferential rules, and one (the potential leaders) connecting via anti-preferential attachments, i.e. selecting lower degree nodes for their initial links. The latter nodes come to develop a higher average degree, and convert eventually into the final hubs....

  5. The relationship between intraspecific assortative mating and reproductive isolation between divergent populations

    Institute of Scientific and Technical Information of China (English)

    Daniel I.BOLNICK; Mark KIRKPATRICK

    2012-01-01

    The term'assortative mating' has been applied to describe two very different phenomena:(1) the tendency for individuals to choose phenotypically similar mates from among conspecifics; or (2) the tendency to prefer conspecific over heterospecific mates (behavioral reproductive isolation).Both forms of assortative mating are widespread in nature,but the relationship between these behaviors remains unclear.Namely,it is plausible that a preference for phenotypically similar conspecifics incidentally reduces the probability of mating with phenotypically divergent heterospecifics.We present a model to calculate how the level of reproductive isolation depends on intraspecific assortative mating and the phenotypic divergence between species.For empirically reasonable levels of intraspecific assortment on a single trait axis,we show that strong reproductive isolation requires very substantial phenotypic divergence.We illustrate this point by applying our model to empirical data from threespine stickleback Gasterosteus aculeatus and Darwin's Finches (Geospiza spp).We conclude that typical levels of intraspecific assortment cannot generally be extrapolated to explain levels of interspecitie reproductive isolation.Instead,reproductive isolation between species likely arises from different mate choice behaviors,or multivariate assortative mating.

  6. The relationship between intraspecific assortative mating and reproductive isolation between divergent populations

    Directory of Open Access Journals (Sweden)

    Daniel I. BOLNICK, Mark KIRKPATRICK

    2012-06-01

    Full Text Available The term 'assortative mating' has been applied to describe two very different phenomena: (1 the tendency for individuals to choose phenotypically similar mates from among conspecifics; or (2 the tendency to prefer conspecific over hete- rospecific mates (behavioral reproductive isolation. Both forms of assortative mating are widespread in nature, but the relationship between these behaviors remains unclear. Namely, it is plausible that a preference for phenotypically similar conspecifics incidentally reduces the probability of mating with phenotypically divergent heterospecifics. We present a model to calculate how the level of reproductive isolation depends on intraspecific assortative mating and the phenotypic divergence between species. For empirically reasonable levels of intraspecific assortment on a single trait axis, we show that strong reproductive isolation requires very substantial phenotypic divergence. We illustrate this point by applying our model to empirical data from threespine stickleback Gasterosteus aculeatus and Darwin’s Finches (Geospiza spp. We conclude that typical levels of intraspecific assortment cannot generally be extrapolated to explain levels of interspecific reproductive isolation. Instead, reproductive isolation between species likely arises from different mate choice behaviors, or multivariate assortative mating [Current Zoology 58 (3: 481–489, 2012].

  7. Genome assortment, not serogroup, defines Vibrio cholerae pandemic strains

    Energy Technology Data Exchange (ETDEWEB)

    Brettin, Thomas S [Los Alamos National Laboratory; Bruce, David C [Los Alamos National Laboratory; Challacombe, Jean F [Los Alamos National Laboratory; Detter, John C [Los Alamos National Laboratory; Han, Cliff S [Los Alamos National Laboratory; Munik, A C [Los Alamos National Laboratory; Chertkov, Olga [Los Alamos National Laboratory; Meincke, Linda [Los Alamos National Laboratory; Saunders, Elizabeth [Los Alamos National Laboratory; Choi, Seon Y [SEOUL NATL. UNIV.; Haley, Bradd J [U. MARYLAND; Taviani, Elisa [U. MARYLAND; Jeon, Yoon - Seong [INTL. VACCINE INST. SEOUL; Kim, Dong Wook [INTL. VACCINE INST. SEOUL; Lee, Jae - Hak [SEOUL NATL. UNIV.; Walters, Ronald A [PNNL; Hug, Anwar [NATL. INST. CHOLERIC ENTERIC DIS.; Colwell, Rita R [U. MARYLAND

    2009-01-01

    Vibrio cholerae, the causative agent of cholera, is a bacterium autochthonous to the aquatic environment, and a serious public health threat. V. cholerae serogroup O1 is responsible for the previous two cholera pandemics, in which classical and El Tor biotypes were dominant in the 6th and the current 7th pandemics, respectively. Cholera researchers continually face newly emerging and re-emerging pathogenic clones carrying combinations of new serogroups as well as of phenotypic and genotypic properties. These genotype and phenotype changes have hampered control of the disease. Here we compare the complete genome sequences of 23 strains of V. cholerae isolated from a variety of sources and geographical locations over the past 98 years in an effort to elucidate the evolutionary mechanisms governing genetic diversity and genesis of new pathogenic clones. The genome-based phylogeny revealed 12 distinct V. cholerae phyletic lineages, of which one, designated the V. cholerae core genome (CG), comprises both O1 classical and EI Tor biotypes. All 7th pandemic clones share nearly identical gene content, i.e., the same genome backbone. The transition from 6th to 7th pandemic strains is defined here as a 'shift' between pathogenic clones belonging to the same O1 serogroup, but from significantly different phyletic lineages within the CG clade. In contrast, transition among clones during the present 7th pandemic period can be characterized as a 'drift' between clones, differentiated mainly by varying composition of laterally transferred genomic islands, resulting in emergence of variants, exemplified by V.cholerae serogroup O139 and V.cholerae O1 El Tor hybrid clones that produce cholera toxin of classical biotype. Based on the comprehensive comparative genomics presented in this study it is concluded that V. cholerae undergoes extensive genetic recombination via lateral gene transfer, and, therefore, genome assortment, not serogroup, should be used to

  8. Structural Analysis of Communication Development.

    Science.gov (United States)

    Conville, Richard L.

    This paper discusses the question of the legitimacy of applying structural analysis to actual human behavior and illustrates its legitimacy by using the reasoning in an essay by Paul Ricoeur. It then asks if the principles of communication development (obliqueness, exchange, and dying) derived from Helen Keller's experience of communication…

  9. Structural Analysis of Plate Based Tensegrity Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Damkilde, Lars

    2013-01-01

    Plate tensegrity structures combine tension cables with a cross laminated timber plate and can then form e.g. a roof structure. The topology of plate tensegrity structures is investigated through a parametric investigation. Plate tensegrity structures are investigated, and a method...... for determination of the structures pre-stresses is used. A parametric investigation is performed to determine a more optimized form of the plate based tensegrity structure. Conclusions of the use of plate based tensegrity in civil engineering and further research areas are discussed....

  10. Structural Analysis of Plate Based Tensegrity Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Damkilde, Lars

    2013-01-01

    Plate tensegrity structures combine tension cables with a cross laminated timber plate and can then form e.g. a roof structure. The topology of plate tensegrity structures is investigated through a parametric investigation. Plate tensegrity structures are investigated, and a method...... for determination of the structures pre-stresses is used. A parametric investigation is performed to determine a more optimized form of the plate based tensegrity structure. Conclusions of the use of plate based tensegrity in civil engineering and further research areas are discussed....

  11. Efficient Analysis of Complex Structures

    Science.gov (United States)

    Kapania, Rakesh K.

    2000-01-01

    Last various accomplishments achieved during this project are : (1) A Survey of Neural Network (NN) applications using MATLAB NN Toolbox on structural engineering especially on equivalent continuum models (Appendix A). (2) Application of NN and GAs to simulate and synthesize substructures: 1-D and 2-D beam problems (Appendix B). (3) Development of an equivalent plate-model analysis method (EPA) for static and vibration analysis of general trapezoidal built-up wing structures composed of skins, spars and ribs. Calculation of all sorts of test cases and comparison with measurements or FEA results. (Appendix C). (4) Basic work on using second order sensitivities on simulating wing modal response, discussion of sensitivity evaluation approaches, and some results (Appendix D). (5) Establishing a general methodology of simulating the modal responses by direct application of NN and by sensitivity techniques, in a design space composed of a number of design points. Comparison is made through examples using these two methods (Appendix E). (6) Establishing a general methodology of efficient analysis of complex wing structures by indirect application of NN: the NN-aided Equivalent Plate Analysis. Training of the Neural Networks for this purpose in several cases of design spaces, which can be applicable for actual design of complex wings (Appendix F).

  12. Marine Structural Analysis and Design

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    王迎光编上海交通大学出版社出版定价:$68.00内容简介:The material in this book has been continuously developed since the author started to teach Modern Ship Structural Design in the Department of Naval Architecture and Ocean Engineering of Shanghai Jiao Tong University in 2004.The subject of marine structural analysis and design is so broad that it is not possible to incorporate every aspect of this sub-

  13. Structural Analysis of Complex Networks

    CERN Document Server

    Dehmer, Matthias

    2011-01-01

    Filling a gap in literature, this self-contained book presents theoretical and application-oriented results that allow for a structural exploration of complex networks. The work focuses not only on classical graph-theoretic methods, but also demonstrates the usefulness of structural graph theory as a tool for solving interdisciplinary problems. Applications to biology, chemistry, linguistics, and data analysis are emphasized. The book is suitable for a broad, interdisciplinary readership of researchers, practitioners, and graduate students in discrete mathematics, statistics, computer science,

  14. Structured Functional Principal Component Analysis

    Science.gov (United States)

    Shou, Haochang; Zipunnikov, Vadim; Crainiceanu, Ciprian M.; Greven, Sonja

    2015-01-01

    Summary Motivated by modern observational studies, we introduce a class of functional models that expand nested and crossed designs. These models account for the natural inheritance of the correlation structures from sampling designs in studies where the fundamental unit is a function or image. Inference is based on functional quadratics and their relationship with the underlying covariance structure of the latent processes. A computationally fast and scalable estimation procedure is developed for high-dimensional data. Methods are used in applications including high-frequency accelerometer data for daily activity, pitch linguistic data for phonetic analysis, and EEG data for studying electrical brain activity during sleep. PMID:25327216

  15. Assortment of the plants in the Medieval diet in Czech countries (based on archaeobotanical finds).

    Science.gov (United States)

    Culíková, V

    2000-01-01

    The finds of remains of useful plants in archaeological objects were drawing attention already in the last century. However, it was not until after the World War II, in relation with renovation of historical cores of the towns, when a separate branch of the botany--archaeobotany constituted. In the Czech Republic it was E. Opravil who was the first to become engaged in a systematic archaeobotanical research at the beginning of the 60's. All the vegetal remains--fruits and seeds on the first place as well as pollen grains from prehistoric times to the post-medieval period, are the subjects of archaeobotany. The medieval waste pits are the richest sources of the vegetal remains. They contain a lot of diasporas of cultural as well as wild plants. The remains of useful plants are an authentic document of the vegetal component of diet. Even though some vegetal species, such as for example garlic, onion or stalk-plants, about whose cultivation we are informed from literature, occur only seldom, there appeared also the species not mentioned in literature. All the basic cereals have been known in our country already since the early Middle Ages. Wheat (Triticum aestivum) and rye (Secale cereale), as well as millet (Panicum miliaceum) that, along with buckwheat (Fagopyrum esculentum), were replaced by potatoes in the modern times were the most important. Also leguminous plants were of great importance in the diet even though their charred seeds seldom preserved. Remains of oil plants such as hemp (Cannabis sativa), flax (Linum usitatissimum) and poppy (Papaver somniferum) preserved well. It was successfully proved that cucumber (Cucumis sativus), among other numerous kinds of vegetables, was introduced by the Slavs already in the 8th century in Moravia and in the 9th century in Bohemia. The assortment of fruit was rich--especially the assortment of cultivated fruit. Among the imported kinds of fruit the first place occupied figs (Ficus carica), from the numerous finds it can

  16. The Cognitive Social Network in Dreams: Transitivity, Assortativity, and Giant Component Proportion Are Monotonic.

    Science.gov (United States)

    Han, Hye Joo; Schweickert, Richard; Xi, Zhuangzhuang; Viau-Quesnel, Charles

    2016-04-01

    For five individuals, a social network was constructed from a series of his or her dreams. Three important network measures were calculated for each network: transitivity, assortativity, and giant component proportion. These were monotonically related; over the five networks as transitivity increased, assortativity increased and giant component proportion decreased. The relations indicate that characters appear in dreams systematically. Systematicity likely arises from the dreamer's memory of people and their relations, which is from the dreamer's cognitive social network. But the dream social network is not a copy of the cognitive social network. Waking life social networks tend to have positive assortativity; that is, people tend to be connected to others with similar connectivity. Instead, in our sample of dream social networks assortativity is more often negative or near 0, as in online social networks. We show that if characters appear via a random walk, negative assortativity can result, particularly if the random walk is biased as suggested by remote associations.

  17. 'Prudent habitat choice': a novel mechanism of size-assortative mating.

    Science.gov (United States)

    Taborsky, B; Guyer, L; Demus, P

    2014-06-01

    Assortative mating, an ubiquitous form of nonrandom mating, strongly impacts Darwinian fitness and can drive biological diversification. Despite its ecological and evolutionary importance, the behavioural processes underlying assortative mating are often unknown, and in particular, mechanisms not involving mate choice have been largely ignored so far. Here, we propose that assortative mating can arise from 'prudent habitat choice', a general mechanism that acts under natural selection, and that it can occur despite a complete mixing of phenotypes. We show that in the cichlid Eretmodus cyanostictus size-assortative mating ensues, because individuals of weaker competitive ability ignore high-quality but strongly competed habitat patches. Previous studies showed that in E. cyanostictus, size-based mate preferences are absent. By field and laboratory experiments, here we showed that (i) habitat quality and body size are correlated in this species; (ii) territories with more stone cover are preferred by both sexes in the absence of competition; and (iii) smaller fish prudently occupy vacant territories of worse quality than do larger fish. Prudent habitat choice is likely to be a widespread mechanism of assortative mating, as both preferences for and dominance-based access to high-quality habitats are generic phenomena in animals.

  18. Assortative social learning and its implications for human (and animal?) societies.

    Science.gov (United States)

    Katsnelson, Edith; Lotem, Arnon; Feldman, Marcus W

    2014-07-01

    Choosing from whom to learn is an important element of social learning. It affects learner success and the profile of behaviors in the population. Because individuals often differ in their traits and capabilities, their benefits from different behaviors may also vary. Homophily, or assortment, the tendency of individuals to interact with other individuals with similar traits, is known to affect the spread of behaviors in humans. We introduce models to study the evolution of assortative social learning (ASL), where assorting on a trait acts as an individual-specific mechanism for filtering relevant models from which to learn when that trait varies. We show that when the trait is polymorphic, ASL may maintain a stable behavioral polymorphism within a population (independently of coexistence with individual learning in a population). We explore the evolution of ASL when assortment is based on a nonheritable or partially heritable trait, and when ASL competes with different non-ASL strategies: oblique (learning from the parental generation) and vertical (learning from the parent). We suggest that the tendency to assort may be advantageous in the context of social learning, and that ASL might be an important concept for the evolutionary theory of social learning.

  19. Genetic and environmental factors associated with laboratory rearing affect survival and assortative mating but not overall mating success in Anopheles gambiae sensu stricto.

    Science.gov (United States)

    Paton, Doug; Touré, Mahamoudou; Sacko, Adama; Coulibaly, Mamadou B; Traoré, Sékou F; Tripet, Frédéric

    2013-01-01

    Anopheles gambiae sensu stricto, the main vector of malaria in Africa, is characterized by its vast geographical range and complex population structure. Assortative mating amongst the reproductively isolated cryptic forms that co-occur in many areas poses unique challenges for programs aiming to decrease malaria incidence via the release of sterile or genetically-modified mosquitoes. Importantly, whether laboratory-rearing affects the ability of An. gambiae individuals of a given cryptic taxa to successfully mate with individuals of their own form in field conditions is still unknown and yet crucial for mosquito-releases. Here, the independent effects of genetic and environmental factors associated with laboratory rearing on male and female survival, mating success and assortative mating were evaluated in the Mopti form of An. gambiae over 2010 and 2011. In semi-field enclosures experiments and despite strong variation between years, the overall survival and mating success of male and female progeny from a laboratory strain was not found to be significantly lower than those of the progeny of field females from the same population. Adult progeny from field-caught females reared at the larval stage in the laboratory and from laboratory females reared outdoors exhibited a significant decrease in survival but not in mating success. Importantly, laboratory individuals reared as larvae indoors were unable to mate assortatively as adults, whilst field progeny reared either outdoors or in the laboratory, as well as laboratory progeny reared outdoors all mated significantly assortatively. These results highlight the importance of genetic and environment interactions for the development of An. gambiae's full mating behavioral repertoire and the challenges this creates for mosquito rearing and release-based control strategies.

  20. Assortative marriages by body mass index have increased simultaneously with the obesity epidemic

    DEFF Research Database (Denmark)

    Adeltoft, Teresa Ajslev; Ängquist, Lars Henrik; Silventoinen, Karri;

    2012-01-01

    Background: The genetic predisposition to obesity may have contributed to the obesity epidemic through assortative mating. We investigated whether spouses were positively assorted by body mass index (BMI; = kg/m(2)) in late childhood, and whether changes in assorted marriage by upper BMI......-percentiles occurred during the obesity epidemic. Methods: In the Copenhagen School Health Records Register (CSHRR) boys and girls with measures of BMI at age 13 years later became 37,792 spousal-pairs who married between 1945 and 2010. Trends in the spousal BMI correlations using sex-, age-, and birth cohort......-specific BMI z-scores across time were investigated. Odds ratios (ORs) of marriage among spouses both with BMI z-scores >90th or >95th percentile compared with marriage among spouses ≤90th percentile were analyzed for marriages entered during the years prior to (1945-1970), and during the obesity epidemic...

  1. Assortative mating among Lake Malawi cichlid fish populations is not simply predictable from male nuptial colour

    Directory of Open Access Journals (Sweden)

    Taylor Martin I

    2009-03-01

    Full Text Available Abstract Background Research on the evolution of reproductive isolation in African cichlid fishes has largely focussed on the role of male colours and female mate choice. Here, we tested predictions from the hypothesis that allopatric divergence in male colour is associated with corresponding divergence in preference. Methods We studied four populations of the Lake Malawi Pseudotropheus zebra complex. We predicted that more distantly-related populations that independently evolved similar colours would interbreed freely while more closely-related populations with different colours mate assortatively. We used microsatellite genotypes or mesh false-floors to assign paternity. Fisher's exact tests as well as Binomial and Wilcoxon tests were used to detect if mating departed from random expectations. Results Surprisingly, laboratory mate choice experiments revealed significant assortative mating not only between population pairs with differently coloured males, but between population pairs with similarly-coloured males too. This suggested that assortative mating could be based on non-visual cues, so we further examined the sensory basis of assortative mating between two populations with different male colour. Conducting trials under monochromatic (orange light, intended to mask the distinctive male dorsal fin hues (blue v orange of these populations, did not significantly affect the assortative mating by female P. emmiltos observed under control conditions. By contrast, assortative mating broke down when direct contact between female and male was prevented. Conclusion We suggest that non-visual cues, such as olfactory signals, may play an important role in mate choice and behavioural isolation in these and perhaps other African cichlid fish. Future speciation models aimed at explaining African cichlid radiations may therefore consider incorporating such mating cues in mate choice scenarios.

  2. Determination of timber assortments obtainable from coppice chestnut stands (Susa Valley, Northern Italy)

    OpenAIRE

    Nosenzo A

    2007-01-01

    Chestnut (Castanea sativa L.) coppice stands currently cover about 195.000 ha of Piedmont (North-Western Italy) surface, corresponding to 22.4 % of the overall forested area in the region. Most of these forest stands are usually older than the typical rotation period. As a consequence from these stands timber assortments with a higher value could be obtained. The purpose of this study is to assess the amount of timber assortments and to propose a sorting methodology based on measurements on s...

  3. Kin assortment in juvenile shoals in wild guppy populations.

    Science.gov (United States)

    Piyapong, C; Butlin, R K; Faria, J J; Scruton, K J; Wang, J; Krause, J

    2011-05-01

    Grouping provides many potential benefits to individuals in terms of foraging and anti-predator protection. However, it has been suggested that individuals could gain additional benefits in terms of indirect fitness by grouping with kin. Surprisingly, the genetic composition of wild fish shoals and the importance of kin-associated shoaling remain poorly understood. The Trinidadian guppy (Poecilia reticulata) has life history traits that might promote kin structure of shoals such as internal fertilisation and small brood size in contrast to many other fish species. Even though previous studies did not find any indication of kin structure in shoals of adult guppies, it is possible that related juveniles remain together in shoals, partly because of lower mobility and because the advantages of kin association may change with age. Using 10 microsatellite markers, we conducted a genetic analysis on 40 shoals from four populations. Pair-wise relatedness was inferred using a modified version of the software package COLONY and permutation tests were conducted to test the hypothesis that kin occur together in juvenile shoals more often than expected by chance. The frequency of sib dyads among juveniles within shoals was significantly larger than that between shoals in two high predation populations but not in two low predation populations. This finding contributes to the understanding of factors underlying shoal composition and highlights the potential of recent methodological advances for detecting such relationships.

  4. Social Recommender Systems Based on Coupling Network Structure Analysis

    CERN Document Server

    Hu, Xiao; Chen, Xiaolong; Zhang, Zi-Ke

    2012-01-01

    The past few years has witnessed the great success of recommender systems, which can significantly help users find relevant and interesting items for them in the information era. However, a vast class of researches in this area mainly focus on predicting missing links in bipartite user-item networks (represented as behavioral networks). Comparatively, the social impact, especially the network structure based properties, is relatively lack of study. In this paper, we firstly obtain five corresponding network-based features, including user activity, average neighbors' degree, clustering coefficient, assortative coefficient and discrimination, from social and behavioral networks, respectively. A hybrid algorithm is proposed to integrate those features from two respective networks. Subsequently, we employ a machine learning process to use those features to provide recommendation results in a binary classifier method. Experimental results on a real dataset, Flixster, suggest that the proposed method can significan...

  5. Testing the niche apportionment hypothesis with parasite communities: is random assortment always the rule?

    Science.gov (United States)

    Muñoz, G; Mouillot, D; Poulin, R

    2006-05-01

    Niche apportionment models have only been applied once to parasite communities. Only the random assortment model (RA), which indicates that species abundances are independent from each other and that interspecific competition is unimportant, provided a good fit to 3 out of 6 parasite communities investigated. The generality of this result needs to be validated, however. In this study we apply 5 niche apportionment models to the parasite communities of 14 fish species from the Great Barrier Reef. We determined which model fitted the data when using either numerical abundance or biomass as an estimate of parasite abundance, and whether the fit of niche apportionment models depends on how the parasite community is defined (e.g. ecto, endoparasites or all parasites considered together). The RA model provided a good fit for the whole community of parasites in 7 fish species when using biovolume (as a surrogate of biomass) as a measure of species abundance. The RA model also fitted observed data when ecto- and endoparasites were considered separately, using abundance or biovolume, but less frequently. Variation in fish sizes among species was not associated with the probability of a model fitting the data. Total numerical abundance and biovolume of parasites were not related across host species, suggesting that they capture different aspects of abundance. Biovolume is not only a better measurement to use with niche-orientated models, it should also be the preferred descriptor to analyse parasite community structure in other contexts. Most of the biological assumptions behind the RA model, i.e. randomness in apportioning niche space, lack of interspecific competition, independence of abundance among different species, and species with variable niches in changeable environments, are in accordance with some previous findings on parasite communities. Thus, parasite communities may generally be unsaturated with species, with empty niches, and interspecific interactions may

  6. Random length assortment of human and mouse T cell receptor for antigen alpha and beta chain CDR3.

    Science.gov (United States)

    Johnson, G; Wu, T T

    1999-10-01

    In view of the recently determined three-dimensional structures of complexes formed by the T cell receptor for antigen (TCR), the processed peptide and the MHC class I molecule, it is expected that the combined configuration formed by the third complementarity determining regions (CDR3) of TCR alpha and beta chains will be very restricted in size and shape due to the limited length variations of the processed peptides. Thus, the combined TCR alpha and beta chain CDR3 lengths should have a fairly narrow distribution. This feature can be due to the selective association of long alpha chain CDR3 with short beta chain CDR3 and vice versa or due to random assortment of alpha and beta chain CDR3 of even narrower length distribution. Based on existing translated amino acid sequence data, it has been found that the latter mechanism is responsible.

  7. Soil Retaining Structures: Development of models for structural analysis

    NARCIS (Netherlands)

    Bakker, K.J.

    2000-01-01

    The topic of this thesis is the development of models for the structural analysis of soil retaining structures. The soil retaining structures being looked at are; block revetments, flexible retaining walls and bored tunnels in soft soil. Within this context typical structural behavior of these struc

  8. Graph Theoretical Analysis of Structural Neuroimaging in Temporal Lobe Epilepsy with and without Psychosis.

    Directory of Open Access Journals (Sweden)

    Daichi Sone

    Full Text Available Psychosis is one of the most important psychiatric comorbidities in temporal lobe epilepsy (TLE, and its pathophysiology still remains unsolved. We aimed to explore the connectivity differences of structural neuroimaging between TLE with and without psychosis using a graph theoretical analysis, which is an emerging mathematical method to investigate network connections in the brain as a small-world system.We recruited 11 TLE patients with unilateral hippocampal sclerosis (HS presenting psychosis or having a history of psychosis (TLE-P group. As controls, 15 TLE patients with unilateral HS without any history of psychotic episodes were also recruited (TLE-N group. For graph theoretical analysis, the normalized gray matter images of both groups were subjected to Graph Analysis Toolbox (GAT. As secondary analyses, each group was compared to 14 age- and gender-matched healthy subjects.The hub node locations were found predominantly in the ipsilateral hemisphere in the TLE-N group, and mainly on the contralateral side in the TLE-P group. The TLE-P group showed significantly higher characteristic path length, transitivity, lower global efficiency, and resilience to random or targeted attack than those of the TLE-N group. The regional comparison in betweenness centrality revealed significantly decreased connectivity in the contralateral temporal lobe, ipsilateral middle frontal gyrus, and bilateral postcentral gyri in the TLE-P group. The healthy subjects showed well-balanced nodes/edges distributions, similar metrics to TLE-N group except for higher small-worldness/modularity/assortativity, and various differences of regional betweenness/clustering.In TLE with psychosis, graph theoretical analysis of structural imaging revealed disrupted connectivity in the contralateral hemisphere. The network metrics suggested that the existence of psychosis can bring vulnerability and decreased efficiency of the whole-brain network. The sharp differences in

  9. Spotting altruistic dictator game players and mingling with them : the elective assortation of classmates

    NARCIS (Netherlands)

    Pradel, Julia; Euler, Harald A.; Fetchenhauer, Detlef

    2009-01-01

    Altruism can evolve through assortation if the selfish advantage of egoistic individuals is outcompeted by the benefits of mutual cooperation between altruists. This selection process is possible if (a) individuals can distinguish altruists from egoists and (b) altruists cooperate electively with ot

  10. Intergenerational income mobility – top incomes and assortative mating in Denmark

    DEFF Research Database (Denmark)

    Hussain, M. Azhar; Bonke, Jens; Munk, Martin D.

    2011-01-01

    This article investigates intergenerational income mobility among top-income people in Denmark focusing on the impact of assortative mating. Earnings and capital income are the variables of interest included in the analyzes testing the hypothesis that both wealth and social heritage are transferred...

  11. The genetic correlation between height and IQ: shared genes or assortative mating?

    Directory of Open Access Journals (Sweden)

    Matthew C Keller

    2013-04-01

    Full Text Available Traits that are attractive to the opposite sex are often positively correlated when scaled such that scores increase with attractiveness, and this correlation typically has a genetic component. Such traits can be genetically correlated due to genes that affect both traits ("pleiotropy" and/or because assortative mating causes statistical correlations to develop between selected alleles across the traits ("gametic phase disequilibrium". In this study, we modeled the covariation between monozygotic and dizygotic twins, their siblings, and their parents (total N = 7,905 to elucidate the nature of the correlation between two potentially sexually selected traits in humans: height and IQ. Unlike previous designs used to investigate the nature of the height-IQ correlation, the present design accounts for the effects of assortative mating and provides much less biased estimates of additive genetic, non-additive genetic, and shared environmental influences. Both traits were highly heritable, although there was greater evidence for non-additive genetic effects in males. After accounting for assortative mating, the correlation between height and IQ was found to be almost entirely genetic in nature. Model fits indicate that both pleiotropy and assortative mating contribute significantly and about equally to this genetic correlation.

  12. The Genetic Correlation between Height and IQ: Shared Genes or Assortative Mating?

    Science.gov (United States)

    Keller, Matthew C.; Garver-Apgar, Christine E.; Wright, Margaret J.; Martin, Nicholas G.; Corley, Robin P.; Stallings, Michael C.; Hewitt, John K.; Zietsch, Brendan P.

    2013-01-01

    Traits that are attractive to the opposite sex are often positively correlated when scaled such that scores increase with attractiveness, and this correlation typically has a genetic component. Such traits can be genetically correlated due to genes that affect both traits (“pleiotropy”) and/or because assortative mating causes statistical correlations to develop between selected alleles across the traits (“gametic phase disequilibrium”). In this study, we modeled the covariation between monozygotic and dizygotic twins, their siblings, and their parents (total N = 7,905) to elucidate the nature of the correlation between two potentially sexually selected traits in humans: height and IQ. Unlike previous designs used to investigate the nature of the height–IQ correlation, the present design accounts for the effects of assortative mating and provides much less biased estimates of additive genetic, non-additive genetic, and shared environmental influences. Both traits were highly heritable, although there was greater evidence for non-additive genetic effects in males. After accounting for assortative mating, the correlation between height and IQ was found to be almost entirely genetic in nature. Model fits indicate that both pleiotropy and assortative mating contribute significantly and about equally to this genetic correlation. PMID:23593038

  13. The short- and long-term impact of an assortment reduction on category sales

    NARCIS (Netherlands)

    Sloot, Laurens M.; Fok, Dennis; Verhoef, Peter C.

    2006-01-01

    In a collaborative study with a major Dutch retailer, the authors assess the short- and long-term effects of a 25% item reduction on-category sales. On an aggregate level, a major assortment reduction can lead to substantive short-term category sales losses but only a weak negative long-term

  14. The short- and long-term impact of an assortment reduction on category sales

    NARCIS (Netherlands)

    Sloot, Laurens M.; Fok, Dennis; Verhoef, Peter C.

    2006-01-01

    In a collaborative study with a major Dutch retailer, the authors assess the short- and long-term effects of a 25% item reduction on-category sales. On an aggregate level, a major assortment reduction can lead to substantive short-term category sales losses but only a weak negative long-term categor

  15. Analysis of Pumphouse RCC Frame Structure for Soil Structure Interaction

    Directory of Open Access Journals (Sweden)

    Mr A.S. Thombare

    2016-06-01

    Full Text Available When structure is built on ground some elements of structure are direct contact with soil. When loads are applied on structure internal forces are developed in both the structure as well as in soil. It results in deformation of both the components which are independent to each other. This are called soil structure interaction. The analysis is done by using (Bentley STAAD.Pro V8i Version 2007 software. The analysis carried out been pump house structure R.C.C. frame structure find out shear force Z direction fixed support and fixed but support for different soil. It concluded that soil structure interaction more affected on fixed base. So overcome the effects of the soil structure interaction on the soft soil, it is important to design the structure to standard loading condition and interaction forces. Thus here concluded that pump house building should be design resist the maximum shear force in fixed base

  16. Educational attainment influences levels of homozygosity through migration and assortative mating.

    Directory of Open Access Journals (Sweden)

    Abdel Abdellaoui

    Full Text Available Individuals with a higher education are more likely to migrate, increasing the chance of meeting a spouse with a different ancestral background. In this context, the presence of strong educational assortment can result in greater ancestry differences within more educated spouse pairs, while less educated individuals are more likely to mate with someone with whom they share more ancestry. We examined the association between educational attainment and F roh (= the proportion of the genome consisting of runs of homozygosity [ROHs] in ~2,000 subjects of Dutch ancestry. The subjects' own educational attainment showed a nominally significant negative association with F roh (p = .045, while the contribution of parental education to offspring F roh was highly significant (father: p < 10(-5; mother: p = 9 × 10(-5, with more educated parents having offspring with fewer ROHs. This association was significantly and fully mediated by the physical distance between parental birthplaces (paternal education: pmediation = 2.4 × 10(-4; maternal education: pmediation = 2.3 × 10(-4, which itself was also significantly associated with F roh (p = 9 × 10(-5. Ancestry-informative principal components from the offspring showed a significantly decreasing association with geography as parental education increased, consistent with the significantly higher migration rates among more educated parents. Parental education also showed a high spouse correlation (Spearman's ρ = .66, p = 3 × 10(-262. We show that less educated parents are less likely to mate with the more mobile parents with a higher education, creating systematic differences in homozygosity due to ancestry differences not directly captured by ancestry-informative principal components (PCs. Understanding how behaviors influence the genomic structure of a population is highly valuable for studies on the genetic etiology of behavioral, cognitive, and social traits.

  17. Robustness Analysis of Kinetic Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2009-01-01

    The present paper considers robustness of kinetic structures. Robustness of structures has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. Especially for these types of structural syst...... systems, it is of interest to investigate how robust the structures are, or what happens if a structural element is added to or removed from the original structure. The present paper discusses this issue for kinetic structures in architecture....

  18. Assortative mating and the reversal of gender inequality in education in europe: an agent-based model.

    Directory of Open Access Journals (Sweden)

    André Grow

    Full Text Available While men have always received more education than women in the past, this gender imbalance in education has turned around in large parts of the world. In many countries, women now excel men in terms of participation and success in higher education. This implies that, for the first time in history, there are more highly educated women than men reaching the reproductive ages and looking for a partner. We develop an agent-based computational model that explicates the mechanisms that may have linked the reversal of gender inequality in education with observed changes in educational assortative mating. Our model builds on the notion that individuals search for spouses in a marriage market and evaluate potential candidates based on preferences. Based on insights from earlier research, we assume that men and women prefer partners with similar educational attainment and high earnings prospects, that women tend to prefer men who are somewhat older than themselves, and that men prefer women who are in their mid-twenties. We also incorporate the insight that the educational system structures meeting opportunities on the marriage market. We assess the explanatory power of our model with systematic computational experiments, in which we simulate marriage market dynamics in 12 European countries among individuals born between 1921 and 2012. In these experiments, we make use of realistic agent populations in terms of educational attainment and earnings prospects and validate model outcomes with data from the European Social Survey. We demonstrate that the observed changes in educational assortative mating can be explained without any change in male or female preferences. We argue that our model provides a useful computational laboratory to explore and quantify the implications of scenarios for the future.

  19. Assortative mating and the reversal of gender inequality in education in europe: an agent-based model.

    Science.gov (United States)

    Grow, André; Van Bavel, Jan

    2015-01-01

    While men have always received more education than women in the past, this gender imbalance in education has turned around in large parts of the world. In many countries, women now excel men in terms of participation and success in higher education. This implies that, for the first time in history, there are more highly educated women than men reaching the reproductive ages and looking for a partner. We develop an agent-based computational model that explicates the mechanisms that may have linked the reversal of gender inequality in education with observed changes in educational assortative mating. Our model builds on the notion that individuals search for spouses in a marriage market and evaluate potential candidates based on preferences. Based on insights from earlier research, we assume that men and women prefer partners with similar educational attainment and high earnings prospects, that women tend to prefer men who are somewhat older than themselves, and that men prefer women who are in their mid-twenties. We also incorporate the insight that the educational system structures meeting opportunities on the marriage market. We assess the explanatory power of our model with systematic computational experiments, in which we simulate marriage market dynamics in 12 European countries among individuals born between 1921 and 2012. In these experiments, we make use of realistic agent populations in terms of educational attainment and earnings prospects and validate model outcomes with data from the European Social Survey. We demonstrate that the observed changes in educational assortative mating can be explained without any change in male or female preferences. We argue that our model provides a useful computational laboratory to explore and quantify the implications of scenarios for the future.

  20. Design and analysis of heliostat support structure

    Energy Technology Data Exchange (ETDEWEB)

    Zang Chuncheng; Wang Zhifeng [Inst. of Electrical Engineering, CAS, BJ (China); Liu Xiaobing; Zhang Xiliang [Himin Solar Energy Group Co. Ltd, Dezhou, SD (China); Wang Yanzhong [Beijing Univ. of Aeronautics and Astronautics, BJ (China)

    2008-07-01

    The design method of the heliostat support structure with the aim of reducing the cost maximally is described in this paper. In order to guarantee the strength, stiffness and stability of the structure, dynamic performance and static performance including internal stress and distortion are analyzed by means of VSAP (Visual Structural Analysis Program) finite element computational software. Then the support structure is optimized on the basis of the analysis. (orig.)

  1. Self-organized architectures from assorted DNA-framed nanoparticles

    Science.gov (United States)

    Liu, Wenyan; Halverson, Jonathan; Tian, Ye; Tkachenko, Alexei V.; Gang, Oleg

    2016-09-01

    The science of self-assembly has undergone a radical shift from asking questions about why individual components self-organize into ordered structures, to manipulating the resultant order. However, the quest for far-reaching nanomanufacturing requires addressing an even more challenging question: how to form nanoparticle (NP) structures with designed architectures without explicitly prescribing particle positions. Here we report an assembly concept in which building instructions are embedded into NPs via DNA frames. The integration of NPs and DNA origami frames enables the fabrication of NPs with designed anisotropic and selective interactions. Using a pre-defined set of different DNA-framed NPs, we show it is possible to design diverse planar architectures, which include periodic structures and shaped meso-objects that spontaneously emerge on mixing of the different topological types of NP. Even objects of non-trivial shapes, such as a nanoscale model of Leonardo da Vinci's Vitruvian Man, can be self-assembled successfully.

  2. Structural analysis considerations for wind turbine blades

    Science.gov (United States)

    Spera, D. A.

    1979-01-01

    Approaches to the structural analysis of wind turbine blade designs are reviewed. Specifications and materials data are discussed along with the analysis of vibrations, loads, stresses, and failure modes.

  3. Analysis of piezoelectric structures and devices

    CERN Document Server

    Chen, Weiqiu; Wang, Ji

    2013-01-01

    This edited work covers piezoelectric materials in the form of beams, plates, shells, and other structural components in modern devices and structures. Applications are frequency control and detection functions in resonators, sensors, actuators, oscillations, and other smart and intelligent structures. The contributions cover novel methods for the analysis of piezoelectric structures including wave propagation, high frequency vibration, material characterization, and optimization of structures. Understanding of these methods is increasingly important in the design and modelling of next generat

  4. Robustness Analysis of Kinetic Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2009-01-01

    Kinetic structures in architecture follows a new trend which is emerging in responsive architecture coined by Nicholas Negroponte when he proposed that architecture may benefit from the integration of computing power into built spaces and structures, and that better performing, more rational...

  5. Robustness Analysis of Kinetic Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2009-01-01

    Kinetic structures in architecture follows a new trend which is emerging in responsive architecture coined by Nicholas Negroponte when he proposed that architecture may benefit from the integration of computing power into built spaces and structures, and that better performing, more rational...

  6. COMPARATIVE ANALYSIS OF STEEL AND ALUMINUM STRUCTURES

    Directory of Open Access Journals (Sweden)

    Josip Peko

    2016-12-01

    Full Text Available This study examined steel and aluminum variants of modern exhibition structures in which the main design requirements include low weight (increased span/depth ratio, transportation, and construction and durability (resistance to corrosion. This included a design situation in which the structural application of aluminum alloys provided an extremely convenient and practical solution. Viability of an aluminum structure depends on several factors and requires a detailed analysis. The overall conclusion of the study indicated that aluminum can be used as a structural material and as a viable alternative to steel for Croatian snow and wind load values and evidently in cases in which positive properties of aluminum are required for structural design. Furthermore, a structural fire analysis was conducted for an aluminum variant structure by using a zone model for realistic fire analysis. The results suggested that passive fire protection for the main structural members was not required in the event of areal fire with duration of 60 min.

  7. New Assortment of Sizing Adhesive%浆纱粘着剂新品种

    Institute of Scientific and Technical Information of China (English)

    刘海文; 何新勇; 张秀敏; 贾立霞; 王联军

    2001-01-01

    The general property , special property and major t echnical index of new assortment of sizing adhesive such as modified starch, mod ified polyvinyl alcohol, acrylic,polyester etc.the four assortments 21 kind products which are in initial use in practice at home and abroad have been intr oduced.%介绍了国内外生产实践中初见使用的一些浆纱粘着剂新品种,例变性淀粉类、变性 聚乙烯醇类、丙烯酸类、聚酯类等4大类21种产品的共性、特性和主要技术指标。

  8. Cytological evidence for assortment mitosis leading to loss of heterozygosity in rice.

    Science.gov (United States)

    Wang, Richard R-C; Li, Xiaomei; Chatterton, N Jerry

    2006-05-01

    In the root meristem cells of the rice line AMR, which causes loss of heterozygosity in its hybrids, both normal and assortment mitoses were observed. During normal mitosis, chromosomes did not form homologous pairs at metaphase; all chromosomes lined up at the equatorial plate and 2 chromatids of each chromosome disjoined at the centromere and moved toward opposite poles. During assortment mitosis, varying numbers of paired homologues were observed at mitotic metaphase. Two groups of 12 chromosomes separated and moved towards the opposite poles of daughter cells with few chromosomes having their chromatids separated at anaphase. These observations support the proposed mechanism that is responsible for early genotype fixation in rice hybrids involving AMR.

  9. Relative importance of social synergy, assortation and networks in the evolution of social cooperation

    CERN Document Server

    Montoreano, Claudia

    2013-01-01

    We compare the likelihood of different socially relevant features to allow the evolutionary emergence and maintenance of cooperation in a generalized variant of the iterated Prisoners Dilemma game. Results show that the average costs/benefit balance of cooperation is the primary constraint for its establishment and maintenance. Behavior increasing inclusive fitness such as assortation, homophily, kin-selection and tagging of individuals, is second in importance. Networks characteristics were the least important in favoring the establishment and maintenance of cooperation, despite being the most popular in recent research on the subject. Results suggest that inclusive fitness theory with its expansions to include assortative and economic considerations is more general, powerful and relevant in analyzing social phenomena than kin selection theory with its emphasis on genetic relatedness. Merging economics with evolutionary theory will be necessary to reveal more about the nature of social dynamics.

  10. Interactive computer program for learning genetic principles of segregation and independent assortment through meiosis.

    Science.gov (United States)

    Yang, Xiaoli; Ge, Rong; Yang, Yufei; Shen, Hao; Li, Yingjie; Tseng, Charles C

    2009-01-01

    Teaching fundamental principles of genetics such as segregation and independent assortment of genes could be challenging for high school and college biology instructors. Students without thorough knowledge in meiosis often end up of frustration and failure in genetics courses. Although all textbooks and laboratory manuals have excellent graphic demonstrations and photographs of meiotic process, students may not always master the concept due to the lack of hands-on exercise. In response to the need for an effective lab exercise to understand the segregation of allelic genes and the independent assortment of the unlinked genes, we developed an interactive program for students to manually manipulate chromosome models and visualize each major step of meiosis so that these two genetic principles can be thoroughly understood.

  11. Recombination and Assortment in the Macronucleus of TETRAHYMENA THERMOPHILA: A Theoretical Study by Computer Simulation

    OpenAIRE

    Doerder, F. P.; Diblasi, S. L.

    1984-01-01

    The compound nature of the macronucleus of Tetrahymena thermophila presents multiple opportunities for recombination between genes on the same macronuclear chromosome. Such recombinants should be detectable through their assortment at subsequent amitotic macronuclear divisions. Thus, a macronucleus that is initially AB/ab should produce recombinant assortees of the genotypes Ab/aB. Computer simulation shows that, when the recombination frequency is two or fewer times per cell cycle, recombin...

  12. Quantifying the risk of pandemic influenza virus evolution by mutation and re-assortment.

    Science.gov (United States)

    Reperant, Leslie A; Grenfell, Bryan T; Osterhaus, Albert D M E

    2015-12-01

    Large outbreaks of zoonotic influenza A virus (IAV) infections may presage an influenza pandemic. However, the likelihood that an airborne-transmissible variant evolves upon zoonotic infection or co-infection with zoonotic and seasonal IAVs remains poorly understood, as does the relative importance of accumulating mutations versus re-assortment in this process. Using discrete-time probabilistic models, we determined quantitative probability ranges that transmissible variants with 1-5 mutations and transmissible re-assortants evolve after a given number of zoonotic IAV infections. The systematic exploration of a large population of model parameter values was designed to account for uncertainty and variability in influenza virus infection, epidemiological and evolutionary processes. The models suggested that immunocompromised individuals are at high risk of generating IAV variants with pandemic potential by accumulation of mutations. Yet, both immunocompetent and immunocompromised individuals could generate high viral loads of single and double mutants, which may facilitate their onward transmission and the subsequent accumulation of additional 1-2 mutations in newly-infected individuals. This may result in the evolution of a full transmissible genotype along short chains of contact transmission. Although co-infection with zoonotic and seasonal IAVs was shown to be a rare event, it consistently resulted in high viral loads of re-assortants, which may facilitate their onward transmission among humans. The prevention or limitation of zoonotic IAV infection in immunocompromised and contact individuals, including health care workers, as well as vaccination against seasonal IAVs-limiting the risk of co-infection-should be considered fundamental tools to thwart the evolution of a novel pandemic IAV by accumulation of mutations and re-assortment.

  13. Assortative Mating and the Reversal of Gender Inequality in Education in Europe: An Agent-Based Model: e0127806

    National Research Council Canada - National Science Library

    André Grow; Jan Van Bavel

    2015-01-01

    .... We develop an agent-based computational model that explicates the mechanisms that may have linked the reversal of gender inequality in education with observed changes in educational assortative mating...

  14. Assortative mating and the reversal of gender inequality in education in europe: an agent-based model

    National Research Council Canada - National Science Library

    Grow, André; Van Bavel, Jan

    2015-01-01

    .... We develop an agent-based computational model that explicates the mechanisms that may have linked the reversal of gender inequality in education with observed changes in educational assortative mating...

  15. Enhancing resolution along multiple imaging dimensions using assorted pixels.

    Science.gov (United States)

    Narasimhan, Srinivasa G; Nayar, Shree K

    2005-04-01

    Multisampled imaging is a general framework for using pixels on an image detector to simultaneously sample multiple dimensions of imaging (space, time, spectrum, brightness, polarization, etc.). The mosaic of red, green, and blue spectral filters found in most solid-state color cameras is one example of multisampled imaging. We briefly describe how multisampling can be used to explore other dimensions of imaging. Once such an image is captured, smooth reconstructions along the individual dimensions can be obtained using standard interpolation algorithms. Typically, this results in a substantial reduction of resolution (and, hence, image quality). One can extract significantly greater resolution in each dimension by noting that the light fields associated with real scenes have enormous redundancies within them, causing different dimensions to be highly correlated. Hence, multisampled images can be better interpolated using local structural models that are learned offline from a diverse set of training images. The specific type of structural models we use are based on polynomial functions of measured image intensities. They are very effective as well as computationally efficient. We demonstrate the benefits of structural interpolation using three specific applications. These are 1) traditional color imaging with a mosaic of color filters, 2) high dynamic range monochrome imaging using a mosaic of exposure filters, and 3) high dynamic range color imaging using a mosaic of overlapping color and exposure filters.

  16. NASA Structural Analysis System (NASTRAN)

    Science.gov (United States)

    Purves, L.

    1991-01-01

    Program aids in structural design of wide range of objects, from high-impact printer parts to turbine engine blades, and fully validated. Since source code included, NASTRAN modified or enhanced for new applications.

  17. Asymmetric group loans, non-assortative matching and adverse selection

    NARCIS (Netherlands)

    Gangopadhyay, Shubhashis; Lensink, Robert

    2014-01-01

    This paper shows that an asymmetric group debt contract, where one borrower co-signs for another, but not vice versa, leads to heterogeneous matching. The analysis suggests that micro finance organizations can achieve the first best by offering asymmetric group contracts. (C) 2014 Elsevier B.V. All

  18. The Intelligent Use of Structural Analysis.

    Science.gov (United States)

    Grierson, Donald E.

    1983-01-01

    Discusses the use of sensitivity analysis in structural design computation. Such analysis can predict how response quantities will vary with given design changes. In addition, it can help student engineers better understand why and when particular structural analyses are or should be conducted. (JN)

  19. Nonlinear structural analysis using integrated force method

    Indian Academy of Sciences (India)

    N R B Krishnam Raju; J Nagabhushanam

    2000-08-01

    Though the use of the integrated force method for linear investigations is well-recognised, no efforts were made to extend this method to nonlinear structural analysis. This paper presents the attempts to use this method for analysing nonlinear structures. General formulation of nonlinear structural analysis is given. Typically highly nonlinear bench-mark problems are considered. The characteristic matrices of the elements used in these problems are developed and later these structures are analysed. The results of the analysis are compared with the results of the displacement method. It has been demonstrated that the integrated force method is equally viable and efficient as compared to the displacement method.

  20. The strength of assortative mating for flowering date and its basis in individual variation in flowering schedule.

    Science.gov (United States)

    Weis, A E; Nardone, E; Fox, G A

    2014-10-01

    Although it has been widely asserted that plants mate assortatively by flowering time, there is virtually no published information on the strength or causes of phenological assortment in natural populations. When strong, assortative mating can accelerate the evolution of plant reproductive phenology through its inflationary effect on genetic variance. We estimated potential assortative mating for flowering date in 31 old-field species in Ontario, Canada. For each species, we constructed a matrix of pairwise mating probabilities from the individual flowering schedules, that is the number of flower deployed on successive dates. The matrix was used to estimate the phenotypic correlation between mates, ρ, for flowering date. We also developed a measure of flowering synchrony within species, S, based upon the eigenstructure of the mating matrix. The mean correlation between pollen recipients and potential donors for flowering date was ρ=0.31 (range: 0.05-0.63). A strong potential for assortative mating was found among species with high variance in flowering date, flowering schedules of short duration and skew towards early flower deployment. Flowering synchrony, S, was negatively correlated with potential assortment (r= -0.49), but we go on to show that although low synchrony is a necessary condition for phenological assortative mating, it may not be sufficient to induce assortment for a given phenological trait. The potential correlation between mates showed no seasonal trend; thus, as climate change imposes selection on phenology through longer growing seasons, spring-flowering species are no more likely to experience an accelerated evolutionary response than summer species.

  1. LISA: a linear structured system analysis program

    OpenAIRE

    Martinez-Martinez, Sinuhé; Mader, Theodor; Boukhobza, Taha; Hamelin, Frédéric

    2007-01-01

    International audience; In this paper the program LISA is presented. LISA is a flexible and portable program which has been developed to analyse structural properties of large scale linear and bilinear structured systems. More precisely, the program LISA contains programmed algorithms which allow us to apply recent results in the analysis of structured systems to some particular cases.

  2. Gender-assortative waist circumference in mother-daughter and father-son pairs, and its implications. An 11-year longitudinal study in children (EarlyBird 59).

    Science.gov (United States)

    Mostazir, M; Jeffery, A; Voss, L; Wilkin, T

    2014-06-01

    Body mass index (BMI) is reportedly gender assortative (mother-daughter, father-son) in contemporary children. We investigated the corresponding transmission of waist circumference (WC) and its implications. We measured parental WC at baseline and WC, height, weight and para-umbilical skin-fold (USF) annually in their offspring from 5 to 15 years (n = 223 trios). Parents were deemed normal metabolic risk (NR) or high risk (HR) according to World Health Organization (WHO) cut-points for WC (mothers 80 cm, fathers 94 cm). The residual from WC adjusted for BMI (WC|BMI ) was used as a surrogate for excess intra-abdominal fat, and its association with insulin resistance (HOMA2-IR) was sought. WC and USF were both gender assortative, while WC|BMI was not. WC was greater by 1.62 cm (P sons) of HR compared with those of NR mothers, and by 1.32 cm (P son (but not father-daughter) pairings. No such differences could be demonstrated for WC|BMI . A standard deviation score 1(SDS) change in WC|BMI , independent of BMI, was associated with a 7.14% change in IR in girls (P relationship between IR and USF. The relationship of offspring WC to metabolic health and to parental size is complex. Subcutaneous abdominal fat is gender assortative but harmless, while intra-abdominal fat (its surrogate in this analysis) is unrelated to parental waist circumference, but metabolically harmful. © 2013 The Authors. Pediatric Obesity © 2013 International Association for the Study of Obesity.

  3. Fourier Analysis and Structure Determination--Part III: X-ray Crystal Structure Analysis.

    Science.gov (United States)

    Chesick, John P.

    1989-01-01

    Discussed is single crystal X-ray crystal structure analysis. A common link between the NMR imaging and the traditional X-ray crystal structure analysis is reported. Claims that comparisons aid in the understanding of both techniques. (MVL)

  4. Active phenotypic assortment in mate selection: self-descriptions and sought-for attributes of mates in dating advertisements.

    Science.gov (United States)

    Sakai, D K; Johnson, R C

    1997-01-01

    Assortative mating results both from social homogamy (coming for similar environments) and active phenotypic assortment (seeking a mate with desired attributes). Dating advertisements provide a means of assessing the role of active phenotypic assortment in the absence of social homogamy. The relative frequency of mention of different attributes (given limited advertising space) is informative regarding the salience of these attributes in active phenotypic assortment. Sex differences in self descriptions and in attributes desired in others in dating advertisements provide a means of evaluating sociobiological issues. Data were analyzed from 191 ads placed by females and 253 ads placed by males seeking to meet members of the opposite sex. The most frequently mentioned attributes are age, race, occupation, moral characteristics, and physical attractiveness. While close to 80 per cent of the advertisers provided information concerning their own race/ethnicity, only a minority of those providing such information limited their quest for a partner to members of their own race/ethnicity. There is substantial assortative mating for religion, family background, status, and educational attainment, yet these attributes are rarely (religion and education) or never (family background) mentioned in advertisements, suggesting that assortative mating on these dimensions may be solely a consequence of social homogamy.

  5. Structural Analysis of the Upper Internal Structure in PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. H.; Koo, G. H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    The upper internal structure (UIS) is a package of hardware suspended from the rotating plug to about 20 cm above the core assemblies. The functions of the UIS are to support shroud tubes containing the primary and secondary control rod drivelines and preserve critical alignments between these drivelines and the core lattice, under normal and off-normal conditions. In addition, the UIS produces sufficient coolant mixing to mitigate thermal transients to downstream components and provides an opening for the In-Vessel transfer machine to access inner core positions without interfacing with the control rod drive lines and the upper core instrumentation package. The radial position of the shroud tube is fixed by three horizontal guide plates and the lower guide plate is close to the core assemblies and is perforated to permit most of the core effluent to reach the region between guide plates. In this study, the primary stress analysis for dead weight was carried out and the thermal stress analysis considering the coolant temperature around the UIS was performed. In addition, the mode characteristics of the structure by the natural frequency analysis were evaluated. The structural analysis model is developed to evaluate the structural integrity of the UIS. The primary stress analysis, the thermal stress analysis and the natural frequency analysis for the UIS are performed, and the maximum stresses and displacements are evaluated. From the analysis results, it is confirmed that the large local stresses don't occur near the holes and through the wall thicknesses of the structure. In addition, the maximum temperature of the UIS is calculated as 545 .deg. C from the thermal analysis and the structure should be evaluated by the ASME design rules at a high temperature. In the future, the more detailed design will be performed by the high temperature evaluation procedure according to the ASME SEC. III, Div.5.

  6. STATIC ANALYSIS OF CABLE STRUCTURE

    Institute of Scientific and Technical Information of China (English)

    HUANG Yan; LAN Wei-ren

    2006-01-01

    Based on the nonlinear geometric relation between strain and displacement for flexible cable, the equilibrium equation under self-weight and influence of temperature was established and an analytical solution of displacement and tension distribution defined in Eulerian coordinate system was accurately obtained. The nonlinear algebraic equations caused by cable structure were solved directly using the modified Powell hybrid algorithm with high precision routine DNEQNE of Fortran. For example, a cable structure consisting of three cables jointly supported by a vertical spring and all the other ends fixed was calculated and compared with various methods by other scholars.

  7. FINITE ELEMENT ANALYSIS OF STRUCTURES

    Directory of Open Access Journals (Sweden)

    PECINGINA OLIMPIA-MIOARA

    2015-05-01

    Full Text Available The application of finite element method is analytical when solutions can not be applied for deeper study analyzes static, dynamic or other types of requirements in different points of the structures .In practice it is necessary to know the behavior of the structure or certain parts components of the machine under the influence of certain factors static and dynamic . The application of finite element in the optimization of components leads to economic growth , to increase reliability and durability organs studied, thus the machine itself.

  8. Probabilistic structural analysis by extremum methods

    Science.gov (United States)

    Nafday, Avinash M.

    1990-01-01

    The objective is to demonstrate discrete extremum methods of structural analysis as a tool for structural system reliability evaluation. Specifically, linear and multiobjective linear programming models for analysis of rigid plastic frames under proportional and multiparametric loadings, respectively, are considered. Kinematic and static approaches for analysis form a primal-dual pair in each of these models and have a polyhedral format. Duality relations link extreme points and hyperplanes of these polyhedra and lead naturally to dual methods for system reliability evaluation.

  9. Assortment of GABAergic plasticity in the cortical interneuron melting pot.

    Science.gov (United States)

    Méndez, Pablo; Bacci, Alberto

    2011-01-01

    Cortical structures of the adult mammalian brain are characterized by a spectacular diversity of inhibitory interneurons, which use GABA as neurotransmitter. GABAergic neurotransmission is fundamental for integrating and filtering incoming information and dictating postsynaptic neuronal spike timing, therefore providing a tight temporal code used by each neuron, or ensemble of neurons, to perform sophisticated computational operations. However, the heterogeneity of cortical GABAergic cells is associated to equally diverse properties governing intrinsic excitability as well as strength, dynamic range, spatial extent, anatomical localization, and molecular components of inhibitory synaptic connections that they form with pyramidal neurons. Recent studies showed that similarly to their excitatory (glutamatergic) counterparts, also inhibitory synapses can undergo activity-dependent changes in their strength. Here, some aspects related to plasticity and modulation of adult cortical and hippocampal GABAergic synaptic transmission will be reviewed, aiming at providing a fresh perspective towards the elucidation of the role played by specific cellular elements of cortical microcircuits during both physiological and pathological operations.

  10. Competitive environments sustain costly altruism with negligible assortment of interactions.

    Science.gov (United States)

    Doncaster, C Patrick; Jackson, Adam; Watson, Richard A

    2013-10-03

    Competition hinders the evolution of altruism amongst kin when beneficiaries gain at the expense of competing relatives. Altruism is consequently deemed to require stronger kin selection, or trait-selected synergies, or elastic population regulation, to counter this effect. Here we contest the view that competition puts any such demands on altruism. In ecologically realistic scenarios, competition influences both altruism and defection. We show how environments that pit defectors against each other allow strong altruism to evolve even in populations with negligible kin structure and no synergies. Competition amongst defectors presents relative advantages to altruism in the simplest games between altruists and defectors, and the most generic models of altruistic phenotypes or genotypes invading non-altruistic populations under inelastic density regulation. Given the widespread inevitability of competition, selection will often favour altruism because its alternatives provide lower fitness. Strong competition amongst defectors nevertheless undermines altruism, by facilitating invasion of unrelated beneficiaries as parasites.

  11. Analysis of composite structural elements

    Directory of Open Access Journals (Sweden)

    A. Baier

    2010-12-01

    Full Text Available Purpose: The themes of the study are composite structural components. For this purpose have been designed and built several research positions.Design/methodology/approach: Using different structural materials to build new device components requires multiple tests of the components. Research posts were designed in the advanced graphical program CAx Siemens NX 7.5. Analysed samples were made from the glass fibre, aramid and carbon of various weights. Due to the specific use of composite materials it focuses on the elements in the form of plates and flat bars. For the examination of experimental strain gauge technique was used bead, the force sensor and displacement sensor. The experimental methods were compared with computer simulation using the FEM.Findings: The aim of this study was to determine the basic material constants and a comparison of the experimental method and the method of computer simulation.Research limitations/implications: Change the number of layers and how to connect the laminate with the steel plate changes mechanical properties of the structural component.Practical implications: The ultimate result will be knowledge on the different forms of laminates, such as material properties, the stresses in all layers, strain and comparing the results obtained by two methods.Originality/value: The expected outcome of the study will be the composition and method of joining composite laminate with a steel plate to the possible application in the repair and construction of structural elements of freight wagons.

  12. Active Learning for Node Classification in Assortative and Disassortative Networks

    CERN Document Server

    Moore, Cristopher; Zhu, Yaojia; Rouquier, Jean-Baptiste; Lane, Terran

    2011-01-01

    In many real-world networks, nodes have class labels, attributes, or variables that affect the network's topology. If the topology of the network is known but the labels of the nodes are hidden, we would like to select a small subset of nodes such that, if we knew their labels, we could accurately predict the labels of all the other nodes. We develop an active learning algorithm for this problem which uses information-theoretic techniques to choose which nodes to explore. We test our algorithm on networks from three different domains: a social network, a network of English words that appear adjacently in a novel, and a marine food web. Our algorithm makes no initial assumptions about how the groups connect, and performs well even when faced with quite general types of network structure. In particular, we do not assume that nodes of the same class are more likely to be connected to each other---only that they connect to the rest of the network in similar ways.

  13. Structural analysis consultation using artificial intelligence

    Science.gov (United States)

    Melosh, R. J.; Marcal, P. V.; Berke, L.

    1978-01-01

    The primary goal of consultation is definition of the best strategy to deal with a structural engineering analysis objective. The knowledge base to meet the need is designed to identify the type of numerical analysis, the needed modeling detail, and specific analysis data required. Decisions are constructed on the basis of the data in the knowledge base - material behavior, relations between geometry and structural behavior, measures of the importance of time and temperature changes - and user supplied specifics characteristics of the spectrum of analysis types, the relation between accuracy and model detail on the structure, its mechanical loadings, and its temperature states. Existing software demonstrated the feasibility of the approach, encompassing the 36 analysis classes spanning nonlinear, temperature affected, incremental analyses which track the behavior of structural systems.

  14. Assorted Methods of Making of Pricing Decisions in an Enterprise

    Directory of Open Access Journals (Sweden)

    Wnorowski Henryk

    2014-08-01

    Full Text Available Decisions concerning price development are best visible in view of their direct impact on the market activities of the company and the general level of profitability. In every activity, the success is measured by an excess of sales revenue over the costs of used resources. In an ideal case, a determined price provides the highest margin resulting from an analysis of the sales volume, takes into consideration the customer's evaluation of the product/service, and allows to react to competitive threats and to fend off the competition's attacks. There is no single universal way to develop prices for various enterprise types, regardless of the conditions of demand, the specific character of the sector they operate in, or the competitive situation, even if we assume that the enterprise has only one goal of activity. That's why, Author recommends three price determination methods. The ways of price determination presented in this article are just the first step on the way to reach the optimal prices. The prices determined in such way, as well as product or service prices already functioning in the market, are subject to modification depending on the assumed goals, taking into consideration the character of demand for a given commodity and the behaviour of the competition.

  15. Pedigrees, assortative mating and speciation in Darwin's finches.

    Science.gov (United States)

    Grant, Peter R; Grant, B Rosemary

    2008-03-22

    Pedigree analysis is a useful tool in the study of speciation. It can reveal trans-generational influences on the choice of mates. We examined mating patterns in a population of Darwin's medium ground finches (Geospiza fortis) on Daphne Major Island to improve our understanding of how a barrier to the exchange of genes between populations arises in evolution. Body sizes of mates were weakly correlated. In one year, the smallest females were paired non-randomly with the males of similar size, and in another year the largest males were paired with the largest females. An influence of parental morphology on the choice of mates, as expected from sexual imprinting theory, was found; the body size of mates was predicted by the body sizes of both parents, and especially strongly by the father's. These associations imply that the seeds of reproductive isolation between species are present within a single variable population. The implication was subject to a natural test: two exceptionally large birds of the study species, apparently immigrants, bred with each other, as did their offspring, and not with the members of the resident population. The intense inbreeding represents incipient speciation. It parallels a similar phenomenon when another species, the large ground finch, immigrated to Daphne and established a new population without interbreeding with the resident medium ground finches.

  16. Robustness Analysis of Timber Truss Structure

    DEFF Research Database (Denmark)

    Rajčić, Vlatka; Čizmar, Dean; Kirkegaard, Poul Henning

    2010-01-01

    The present paper discusses robustness of structures in general and the robustness requirements given in the codes. Robustness of timber structures is also an issues as this is closely related to Working group 3 (Robustness of systems) of the COST E55 project. Finally, an example of a robustness...... evaluation of a widespan timber truss structure is presented. This structure was built few years ago near Zagreb and has a span of 45m. Reliability analysis of the main members and the system is conducted and based on this a robustness analysis is preformed....

  17. Thermal and structural analysis of Hermes

    Science.gov (United States)

    Petiau, C.

    1989-08-01

    After a brief recap of Hermes TPS and structure principles, we present the organization of thermal and structural analysis of the Hermes project, and we describe the way to resolve the problems of connections between calculations performed by the different Hermes partners. We describe in detail the interactions between the general model of TPS, used for global dimensioning of insulation, and refined thermal models giving an accurate temperature map inside details of "hot" and "cold" structures. The organization for structural analysis is based on a finite element general model which supports preliminary design, loads and vibration analyses. Boundary conditions for refined subpart analyses are cut to size, into the general model by a super element technique. This process involves the use by all partners of efficient computer codes, in the field of structural analysis and optimization integrated with CAD; for this Dassault proposes as a reference: the CATIA-ELFINI system.

  18. Dynamic analysis and design of offshore structures

    CERN Document Server

    Chandrasekaran, Srinivasan

    2015-01-01

    This book  attempts to provide readers with an overall idea of various types of offshore platform geometries. It covers the various environmental loads encountered by these structures, a detailed description of the fundamentals of structural dynamics in a class-room style, estimate of damping in offshore structures and their applications in the preliminary analysis and design. Basic concepts of structural dynamics are emphasized through simple illustrative examples and exercises. Design methodologies and guidelines, which are FORM based concepts are explained through a few applied example structures. Each chapter also has tutorials and exercises for self-learning. A dedicated chapter on stochastic dynamics will help the students to extend the basic concepts of structural dynamics to this advanced domain of research. Hydrodynamic response of offshore structures with perforated members is one of the recent research applications, which is found to be one of the effective manner of retrofitting offshore structur...

  19. Semantic Antinomies and Deep Structure Analysis

    Science.gov (United States)

    Zuber, Ryszard

    1975-01-01

    This article discusses constructions known as semantic antinomies, that is, the paradoxical results of false presuppositions, and how they can be dealt with by means of deep structure analysis. See FL 508 186 for availability. (CLK)

  20. Semantic Antinomies and Deep Structure Analysis

    Science.gov (United States)

    Zuber, Ryszard

    1975-01-01

    This article discusses constructions known as semantic antinomies, that is, the paradoxical results of false presuppositions, and how they can be dealt with by means of deep structure analysis. See FL 508 186 for availability. (CLK)

  1. Structural Dynamics and Data Analysis

    Science.gov (United States)

    Luthman, Briana L.

    2013-01-01

    This project consists of two parts, the first will be the post-flight analysis of data from a Delta IV launch vehicle, and the second will be a Finite Element Analysis of a CubeSat. Shock and vibration data was collected on WGS-5 (Wideband Global SATCOM- 5) which was launched on a Delta IV launch vehicle. Using CAM (CAlculation with Matrices) software, the data is to be plotted into Time History, Shock Response Spectrum, and SPL (Sound Pressure Level) curves. In this format the data is to be reviewed and compared to flight instrumentation data from previous flights of the same launch vehicle. This is done to ensure the current mission environments, such as shock, random vibration, and acoustics, are not out of family with existing flight experience. In family means the peaks on the SRS curve for WGS-5 are similar to the peaks from the previous flights and there are no major outliers. The curves from the data will then be compiled into a useful format so that is can be peer reviewed then presented before an engineering review board if required. Also, the reviewed data will be uploaded to the Engineering Review Board Information System (ERBIS) to archive. The second part of this project is conducting Finite Element Analysis of a CubeSat. In 2010, Merritt Island High School partnered with NASA to design, build and launch a CubeSat. The team is now called StangSat in honor of their mascot, the mustang. Over the past few years, the StangSat team has built a satellite and has now been manifested for flight on a SpaceX Falcon 9 launch in 2014. To prepare for the final launch, a test flight was conducted in Mojave, California. StangSat was launched on a Prospector 18D, a high altitude rocket made by Garvey Spacecraft Corporation, along with their sister satellite CP9 built by California Polytechnic University. However, StangSat was damaged during an off nominal landing and this project will give beneficial insights into what loads the CubeSat experienced during the crash

  2. Groundtruthing Next-Gen Sequencing for Microbial Ecology–Biases and Errors in Community Structure Estimates from PCR Amplicon Pyrosequencing

    OpenAIRE

    Lee, Charles K.; Craig W. Herbold; Polson, Shawn W.; K Eric Wommack; Williamson, Shannon J.; McDonald, Ian R.; S. Craig Cary

    2012-01-01

    Analysis of microbial communities by high-throughput pyrosequencing of SSU rRNA gene PCR amplicons has transformed microbial ecology research and led to the observation that many communities contain a diverse assortment of rare taxa-a phenomenon termed the Rare Biosphere. Multiple studies have investigated the effect of pyrosequencing read quality on operational taxonomic unit (OTU) richness for contrived communities, yet there is limited information on the fidelity of community structure est...

  3. Entity Authentication:Analysis using Structured Intuition

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Jensen, Christian D.

    2010-01-01

    In this paper, we propose a new method for the analysis that uses intuition of the analyst in a structured way. First we define entity authentication in terms of fine level authentication goals (FLAGs). Then we use some relevant structures in protocol narrations and use them to justify FLAGs...... specification of security in terms of FLAGs; and secondly the outcome can be used to transform basic protocol narrations into more detailed specifications, which makes a subsequent formal analysis much more meaningful....

  4. Analysis model of structure-HDS

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Presents the model established for Structure-HDS(hydraulic damper system) analysis on the basis of the theoretical analysis model of non-compressed fluid in the round pipe will an uniform velocity used as the basic variable, and pressure losses resulting from cross section changes of fluid route taken into consideration. Which provides necessary basis for researches on earthquake responses of a structure with a spacious first story, equipped with HDS at first floor.

  5. Using rhetorical structure in sentiment analysis

    NARCIS (Netherlands)

    Hogenboom, Alexander; Frasincar, Flavius; Jong, de Franciska; Kaymak, Uzay

    2015-01-01

    Automated sentiment analysis has become an active field of study with a broad applicability. One of the key open research issues lies in dealing with structural aspects of text when analyzing its conveyed sentiment. Recent work uses structural aspects of text in order to distinguish important text s

  6. Generalized Structured Component Analysis with Latent Interactions

    Science.gov (United States)

    Hwang, Heungsun; Ho, Moon-Ho Ringo; Lee, Jonathan

    2010-01-01

    Generalized structured component analysis (GSCA) is a component-based approach to structural equation modeling. In practice, researchers may often be interested in examining the interaction effects of latent variables. However, GSCA has been geared only for the specification and testing of the main effects of variables. Thus, an extension of GSCA…

  7. Group theory analysis of braided geometry structures

    Institute of Scientific and Technical Information of China (English)

    FENG Wei; MA Wensuo

    2005-01-01

    The braided geometry structures are analyzed with point groups and space groups for which the continuous yarn of the braided preforms is segmented and expressed in some special symbols. All structures of braided material are described and classified with group theory, and new braiding methods are found. The group theory analysis lays the theoretical foundation for optimizing material performance.

  8. Bayesian analysis of cosmic structures

    CERN Document Server

    Kitaura, Francisco-Shu

    2011-01-01

    We revise the Bayesian inference steps required to analyse the cosmological large-scale structure. Here we make special emphasis in the complications which arise due to the non-Gaussian character of the galaxy and matter distribution. In particular we investigate the advantages and limitations of the Poisson-lognormal model and discuss how to extend this work. With the lognormal prior using the Hamiltonian sampling technique and on scales of about 4 h^{-1} Mpc we find that the over-dense regions are excellent reconstructed, however, under-dense regions (void statistics) are quantitatively poorly recovered. Contrary to the maximum a posteriori (MAP) solution which was shown to over-estimate the density in the under-dense regions we obtain lower densities than in N-body simulations. This is due to the fact that the MAP solution is conservative whereas the full posterior yields samples which are consistent with the prior statistics. The lognormal prior is not able to capture the full non-linear regime at scales ...

  9. Structural Analysis Of Offshore Structures Exposed To Blast Loads

    DEFF Research Database (Denmark)

    Hansen, Hans Jakup; Thygesen, Ulf; Kristensen, Anders;

    2002-01-01

    Numerical methods for simulations of blast loads and resulting structural response are investigated and compared to results obtained from tests. The CFD code EXSIM is used for the simulation of the blast load. This code provides a load profile wich is entered in the FEM analysis model....

  10. Structural Analysis in a Conceptual Design Framework

    Science.gov (United States)

    Padula, Sharon L.; Robinson, Jay H.; Eldred, Lloyd B.

    2012-01-01

    Supersonic aircraft designers must shape the outer mold line of the aircraft to improve multiple objectives, such as mission performance, cruise efficiency, and sonic-boom signatures. Conceptual designers have demonstrated an ability to assess these objectives for a large number of candidate designs. Other critical objectives and constraints, such as weight, fuel volume, aeroelastic effects, and structural soundness, are more difficult to address during the conceptual design process. The present research adds both static structural analysis and sizing to an existing conceptual design framework. The ultimate goal is to include structural analysis in the multidisciplinary optimization of a supersonic aircraft. Progress towards that goal is discussed and demonstrated.

  11. Seismic analysis of nuclear power plant structures

    Science.gov (United States)

    Go, J. C.

    1973-01-01

    Primary structures for nuclear power plants are designed to resist expected earthquakes of the site. Two intensities are referred to as Operating Basis Earthquake and Design Basis Earthquake. These structures are required to accommodate these seismic loadings without loss of their functional integrity. Thus, no plastic yield is allowed. The application of NASTRAN in analyzing some of these seismic induced structural dynamic problems is described. NASTRAN, with some modifications, can be used to analyze most structures that are subjected to seismic loads. A brief review of the formulation of seismic-induced structural dynamics is also presented. Two typical structural problems were selected to illustrate the application of the various methods of seismic structural analysis by the NASTRAN system.

  12. A protein structure data and analysis system.

    Science.gov (United States)

    Tian, Hao; Sunderraman, Rajshekhar; Weber, Irene; Wang, Haibin; Yang, Hong

    2005-01-01

    In this paper, we present the design and implementation of a protein structure data and analysis system that is only used in the lab for analyzing the proprietary data. It is capable of storing public protein data, such as the data in Protein Data Bank (PDB) [1], and life scientists' proprietary data. This toolkit is targeted at life scientists who want to maintain proprietary protein structure data (may be incomplete), to search and query publicly known protein structures and to compare their structure data with others. The comparison functions can be used to find structure differences between two proteins at atom level, especially in mutant versions of proteins. The system can also be used as a tool of choosing better protein structure template in new protein's tertiary structure prediction. The system is developed in Java and the protein data is stored in a relational database (Oracle 9i).

  13. Polarity Analysis of Texts using Discourse Structure

    NARCIS (Netherlands)

    Heerschop, Bas; Goosen, Frank; Hogenboom, Alexander; Frasincar, Flavius; Kaymak, Uzay; Jong, de Franciska

    2011-01-01

    Sentiment analysis has applications in many areas and the exploration of its potential has only just begun. We propose Pathos, a framework which performs document sentiment analysis (partly) based on a document’s discourse structure. We hypothesize that by splitting a text into important and less im

  14. [The influence of Fasciola hepatica invasion on the assorted milk quality parameters in cows].

    Science.gov (United States)

    Michalski, Mirosław

    2002-01-01

    The investigations of the influence of Fasciola hepatica invasion on the assorted parameters of milk quality were performed in cows. Mean protein content in the milk from infected animals ammounted 3.60% and was higher than in the milk from uninfected cows (3.30%). Similar tendency was observed in the case of the fat (5.08% and 3.91%) and lactose (4.36% and 4.34%). The count of somatic cells in milk from infected cows was lower than in milk from uninfected animals (356.07 and 1776.92). It can indicate immunosupressive activity of Fasciola hepatica on the host.

  15. The Impact of Product Assortment Size and Attribute Quantity on Information Searches

    DEFF Research Database (Denmark)

    Dörnyei, Krisztina Rita; Chrysochou, Polymeros; Krystallis, Athanasios

    2017-01-01

    Purpose: This paper investigates the impact of assortment size and attribute quantity on the depth and content of consumer information searches. Design/methodology/approach: For a computer-aided experiment using an information display board, participants (n=393) were placed in a simulated shopping......, this sacrifice comes at the expense of secondary product attributes (e.g., nutrition information, country of origin), whereas primary product attributes (e.g., brand name, price) remain constant. Attribute quantity does not have a significant effect on information search. Practical implications: Provided...

  16. Marketing Strategy Development Directions of Web Assortment in the Republic of Serbia

    Directory of Open Access Journals (Sweden)

    Jelena Končar

    2010-06-01

    Full Text Available Electronic commerce is a contemporary way of doing trade activities based on the use of information and communication technologies. In contemporary business conditions, trade faces numerous changes, which are mostly, before all, the result of market globalization, as well as information technology development. The Web assortment in electronic commerce is the key marketing instrument in a trade organization. The basic task of Serbian companies understands the need of tracking all the changes in the business environment on the global market with a view of meeting consumers requirements and needs. Business success of an e-commerce trader, besides other factors, greatly depends on the adequate choice of sales programs.

  17. Assortment of Deep Mantle Fluids and Their Products in Kimberlites from China

    Institute of Scientific and Technical Information of China (English)

    ZHAO Lei; HAO Jinhua; DING Yifei; LIU Yulong

    2004-01-01

    Based on studies of petrography, mineralogy and mineral chemistry, deep mantle fluids and their products in kimberlites and diamonds can be assorted into the ultradeep fluid-transmitted minerals with an oxygen-free feature, the deep fluid metasomatized-minerals characterized by enrichment in TiO2, K2O, BaO, REE and Fe3+, and the deep fluidreformed minerals. The three types show a successive descent in fluid origin depth and metasomatism strength, and they have brought forth a series of corresponding metasomatic products.

  18. Structural-Thermal-Optical-Performance (STOP) Analysis

    Science.gov (United States)

    Bolognese, Jeffrey; Irish, Sandra

    2015-01-01

    The presentation will be given at the 26th Annual Thermal Fluids Analysis Workshop (TFAWS 2015) hosted by the Goddard Spaceflight Center (GSFC) Thermal Engineering Branch (Code 545). A STOP analysis is a multidiscipline analysis, consisting of Structural, Thermal and Optical Performance Analyses, that is performed for all space flight instruments and satellites. This course will explain the different parts of performing this analysis. The student will learn how to effectively interact with each discipline in order to accurately obtain the system analysis results.

  19. Kinematic Analysis of a Hybrid Structure

    Directory of Open Access Journals (Sweden)

    Q.J. Duan

    2012-11-01

    Full Text Available This paper presents a kinematic analysis and simulation of a hybrid structure applied to the new design cable-suspended feed structure (CSFS for the next generation of large spherical radio telescopes. First, considering the requirement that feeds should be tilted from 40° to 60° and that the tracking precision in steady state is 4mm, a novel design of the feed supporting structure including a cable-cabin structure, an AB axis structure and a Stewart platform is performed. Next, kinematic analysis and the simulation of the CSFS are done. Simulations have been developed in combination with the 50m CSFS model, which demonstrate the effectiveness and feasibility of the proposed three-level cable-suspended feed system.

  20. Structural Vibration Monitoring Using Cumulative Spectral Analysis

    Directory of Open Access Journals (Sweden)

    Satoru Goto

    2013-01-01

    Full Text Available This paper describes a resonance decay estimation for structural health monitoring in the presence of nonstationary vibrations. In structural health monitoring, the structure's frequency response and resonant decay characteristics are very important for understanding how the structure changes. Cumulative spectral analysis (CSA estimates the frequency decay by using the impulse response. However, measuring the impulse response of buildings is impractical due to the need to shake the building itself. In a previous study, we reported on system damping monitoring using cumulative harmonic analysis (CHA, which is based on CSA. The current study describes scale model experiments on estimating the hidden resonance decay under non-stationary noise conditions by using CSA for structural condition monitoring.

  1. Positive network assortativity of influenza vaccination at a high school: implications for outbreak risk and herd immunity.

    Science.gov (United States)

    Barclay, Victoria C; Smieszek, Timo; He, Jianping; Cao, Guohong; Rainey, Jeanette J; Gao, Hongjiang; Uzicanin, Amra; Salathé, Marcel

    2014-01-01

    Schools are known to play a significant role in the spread of influenza. High vaccination coverage can reduce infectious disease spread within schools and the wider community through vaccine-induced immunity in vaccinated individuals and through the indirect effects afforded by herd immunity. In general, herd immunity is greatest when vaccination coverage is highest, but clusters of unvaccinated individuals can reduce herd immunity. Here, we empirically assess the extent of such clustering by measuring whether vaccinated individuals are randomly distributed or demonstrate positive assortativity across a United States high school contact network. Using computational models based on these empirical measurements, we further assess the impact of assortativity on influenza disease dynamics. We found that the contact network was positively assortative with respect to influenza vaccination: unvaccinated individuals tended to be in contact more often with other unvaccinated individuals than with vaccinated individuals, and these effects were most pronounced when we analyzed contact data collected over multiple days. Of note, unvaccinated males contributed substantially more than unvaccinated females towards the measured positive vaccination assortativity. Influenza simulation models using a positively assortative network resulted in larger average outbreak size, and outbreaks were more likely, compared to an otherwise identical network where vaccinated individuals were not clustered. These findings highlight the importance of understanding and addressing heterogeneities in seasonal influenza vaccine uptake for prevention of large, protracted school-based outbreaks of influenza, in addition to continued efforts to increase overall vaccine coverage.

  2. Positive network assortativity of influenza vaccination at a high school: implications for outbreak risk and herd immunity.

    Directory of Open Access Journals (Sweden)

    Victoria C Barclay

    Full Text Available Schools are known to play a significant role in the spread of influenza. High vaccination coverage can reduce infectious disease spread within schools and the wider community through vaccine-induced immunity in vaccinated individuals and through the indirect effects afforded by herd immunity. In general, herd immunity is greatest when vaccination coverage is highest, but clusters of unvaccinated individuals can reduce herd immunity. Here, we empirically assess the extent of such clustering by measuring whether vaccinated individuals are randomly distributed or demonstrate positive assortativity across a United States high school contact network. Using computational models based on these empirical measurements, we further assess the impact of assortativity on influenza disease dynamics. We found that the contact network was positively assortative with respect to influenza vaccination: unvaccinated individuals tended to be in contact more often with other unvaccinated individuals than with vaccinated individuals, and these effects were most pronounced when we analyzed contact data collected over multiple days. Of note, unvaccinated males contributed substantially more than unvaccinated females towards the measured positive vaccination assortativity. Influenza simulation models using a positively assortative network resulted in larger average outbreak size, and outbreaks were more likely, compared to an otherwise identical network where vaccinated individuals were not clustered. These findings highlight the importance of understanding and addressing heterogeneities in seasonal influenza vaccine uptake for prevention of large, protracted school-based outbreaks of influenza, in addition to continued efforts to increase overall vaccine coverage.

  3. Choosing mates based on the diet of your ancestors: replication of non-genetic assortative mating in Drosophila melanogaster

    Directory of Open Access Journals (Sweden)

    Michael A. Najarro

    2015-08-01

    Full Text Available Assortative mating has been a focus of considerable research because of its potential to influence biodiversity at many scales. Sharon et al. (2010 discovered that an inbred strain of Drosophila melanogaster mated assortatively based on the diet of previous generations, leading to initial reproductive isolation without genetic evolution. This behavior was reproduced by manipulating the microbiome independently of the diet, pointing to extracellular bacterial symbionts as the assortative mating cue. To further investigate the biological significance of this result, we attempted to reproduce this phenomenon in an independent laboratory using different genotypes and additional mating assays. Supporting the previous result, we found that a different inbred strain also mated assortatively based on the diets of previous generations. However, we were unable to generate assortative mating in an outbred strain from North Carolina. Our results support the potential for non-genetic mechanisms to influence reproductive isolation, but additional work is needed to investigate the importance of this mechanism in natural populations of Drosophila.

  4. Advanced analysis for structural steel building design

    Institute of Scientific and Technical Information of China (English)

    Wai Fah CHEN

    2008-01-01

    The 2005 AISC LRFD Specifications for Structural Steel Buildings are making it possible for designers to recognize explicitly the structural resistance provided within the elastic and inelastic ranges of beha-vior and up to the maximum load limit state. There is an increasing awareness of the need for practical second-order analysis approaches for a direct determination of overall structural system response. This paper attempts to present a simple, concise and reasonably comprehens-ive introduction to some of the theoretical and practical approaches which have been used in the traditional and modern processes of design of steel building structures.

  5. Variation in human mate choice: simultaneously investigating heritability, parental influence, sexual imprinting, and assortative mating.

    Science.gov (United States)

    Zietsch, Brendan P; Verweij, Karin J H; Heath, Andrew C; Martin, Nicholas G

    2011-05-01

    Human mate choice is central to individuals' lives and to the evolution of the species, but the basis of variation in mate choice is not well understood. Here we looked at a large community-based sample of twins and their partners and parents ([Formula: see text] individuals) to test for genetic and family environmental influences on mate choice, while controlling for and not controlling for the effects of assortative mating. Key traits were analyzed, including height, body mass index, age, education, income, personality, social attitudes, and religiosity. This revealed near-zero genetic influences on male and female mate choice over all traits and no significant genetic influences on mate choice for any specific trait. A significant family environmental influence was found for the age and income of females' mate choices, possibly reflecting parental influence over mating decisions. We also tested for evidence of sexual imprinting, where individuals acquire mate-choice criteria during development by using their opposite-sex parent as the template of a desirable mate; there was no such effect for any trait. The main discernible pattern of mate choice was assortative mating; we found that partner similarity was due to initial choice rather than convergence and also at least in part to phenotypic matching.

  6. An adaptive assortment management in the balanced scorecard of the pharmaceutical organization

    Directory of Open Access Journals (Sweden)

    I. F. Samoshchenkova

    2015-12-01

    Full Text Available Currently, in order to achieve success in business, companies need to be able to adapt quickly to the changing market conditions, and surpass their competitors in quality, speed of service, breadth of product range and price of products. Aim. To analyze the usefulness of an adaptive assortment management in the balanced scorecard of the pharmaceutical organization Methods and results. The objects of the research are features of the methodology of modern marketing in the field of management of goods and assortment in application of the pharmaceutical companies’ activities. One of the important elements of pharmaceutical management is the management of goods variety, which acts as a set of institutional arrangements, procedures and actions, applied management and employees of the economic entity for the successful and efficient business activities. The Balanced Scorecard (BSC is an integral part of management performance. It allows to operate units and employees in accordance with the strategic goals of the organization, as well it lets to evaluate the results of these activities through a set of performance indicators. Conclusions. The adaptive range control in pharmaceutical organizations on the basis of a balanced scorecard allows you to control and account each operation performed by specialist and thus improves key indicators of pharmacy business.

  7. Extended inclusive fitness theory: synergy and assortment drives the evolutionary dynamics in biology and economics.

    Science.gov (United States)

    Jaffe, Klaus

    2016-01-01

    W.D. Hamilton's Inclusive Fitness Theory explains the conditions that favor the emergence and maintenance of social cooperation. Today we know that these include direct and indirect benefits an agent obtains by its actions, and through interactions with kin and with genetically unrelated individuals. That is, in addition to kin-selection, assortation or homophily, and social synergies drive the evolution of cooperation. An Extended Inclusive Fitness Theory (EIFT) synthesizes the natural selection forces acting on biological evolution and on human economic interactions by assuming that natural selection driven by inclusive fitness produces agents with utility functions that exploit assortation and synergistic opportunities. This formulation allows to estimate sustainable cost/benefit threshold ratios of cooperation among organisms and/or economic agents, using existent analytical tools, illuminating our understanding of the dynamic nature of society, the evolution of cooperation among kin and non-kin, inter-specific cooperation, co-evolution, symbioses, division of labor and social synergies. EIFT helps to promote an interdisciplinary cross fertilization of the understanding of synergy by, for example, allowing to describe the role for division of labor in the emergence of social synergies, providing an integrated framework for the study of both, biological evolution of social behavior and economic market dynamics. Another example is a bio-economic understanding of the motivations of terrorists, which identifies different forms of terrorism.

  8. Analysis of flexible structures under lateral impact

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, D. F. [Paul C. Kizzo and Associates Inc., Seismic Structural Group, Oakland, CA 94612 (United States); Razavi, H. [AREVA Inc., Civil Seismic Group, San Jose, CA 95119 (United States)

    2012-07-01

    Three methods for analysis of flexible structures under lateral impact are presented. The first proposed method (Method A) consists of: (1) modifying an available deceleration on a rigid target with conservation principles to account for structural flexibility; and (2) transient nonlinear analysis of the structure with the corrected forcing function. The second proposed method (Method B) is similar to Method A in obtaining the forcing function but it solves the equations of motion of an idealized two-degree-of-freedom system instead of directly using conservation principles. The last method simply provides the maximum force in the structure using the conservation of energy and linear momentum. A coupled simulation is also performed in LS-DYNA and compared against the proposed methods. A case study is presented to illustrate the applicability of all three methods and the LS-DYNA simulation. (authors)

  9. Dynamic Analysis of Structures Using Neural Networks

    Directory of Open Access Journals (Sweden)

    N. Ahmadi

    2008-01-01

    Full Text Available In the recent years, neural networks are considered as the best candidate for fast approximation with arbitrary accuracy in the time consuming problems. Dynamic analysis of structures against earthquake has the time consuming process. We employed two kinds of neural networks: Generalized Regression neural network (GR and Back-Propagation Wavenet neural network (BPW, for approximating of dynamic time history response of frame structures. GR is a traditional radial basis function neural network while BPW categorized as a wavelet neural network. In BPW, sigmoid activation functions of hidden layer neurons are substituted with wavelets and weights training are achieved using Scaled Conjugate Gradient (SCG algorithm. Comparison the results of BPW with those of GR in the dynamic analysis of eight story steel frame indicates that accuracy of the properly trained BPW was better than that of GR and therefore, BPW can be efficiently used for approximate dynamic analysis of structures.

  10. Object-Oriented Analysis, Structured Analysis, and Jackson System Development

    NARCIS (Netherlands)

    Wieringa, R.J.; Van Assche, F.; Moulin, B.; Rolland, C.

    1991-01-01

    Conceptual modeling is the activity of producing a conceptual model of an actual or desired version of a universe of discourse (UoD). In this paper, two methods of conceptual modeling are compared, structured analysis (SA) and object-oriented analysis (OOA). This is done by transforming a model prod

  11. Object-Oriented Analysis, Structured Analysis, and Jackson System Development

    NARCIS (Netherlands)

    Van Assche, F.; Wieringa, Roelf J.; Moulin, B.; Rolland, C

    1991-01-01

    Conceptual modeling is the activity of producing a conceptual model of an actual or desired version of a universe of discourse (UoD). In this paper, two methods of conceptual modeling are compared, structured analysis (SA) and object-oriented analysis (OOA). This is done by transforming a model

  12. Data structures and algorithm analysis in Java

    CERN Document Server

    Shaffer, Clifford A

    2011-01-01

    With its focus on creating efficient data structures and algorithms, this comprehensive text helps readers understand how to select or design the tools that will best solve specific problems. It uses Java as the programming language and is suitable for second-year data structure courses and computer science courses in algorithm analysis. Techniques for representing data are presented within the context of assessing costs and benefits, promoting an understanding of the principles of algorithm analysis and the effects of a chosen physical medium. The text also explores tradeoff issues, familiari

  13. Data structures and algorithm analysis in C++

    CERN Document Server

    Shaffer, Clifford A

    2011-01-01

    With its focus on creating efficient data structures and algorithms, this comprehensive text helps readers understand how to select or design the tools that will best solve specific problems. It uses Microsoft C++ as the programming language and is suitable for second-year data structure courses and computer science courses in algorithm analysis.Techniques for representing data are presented within the context of assessing costs and benefits, promoting an understanding of the principles of algorithm analysis and the effects of a chosen physical medium. The text also explores tradeoff issues, f

  14. On the structural analysis of textile composites

    Science.gov (United States)

    Bogdanovich, Alexander E.; Pastore, Christopher M.

    The local structural inhomogeneities which distinguish textile composites from laminated materials are discussed. Techniques for quantifying these inhomogeneities through three dimensional geometric modelling are introduced and methods of translating them into elastic properties are presented. Some basic ideas on application of spline functions to the stress field analysis in textile composites are proposed. The significance of internal continuity conditions for these materials is emphasized. Several analytical techniques based on the concept of a meso-volume are discussed. An example is presented to demonstrate the application of the method to structural analysis of textile composites.

  15. Value of Information Analysis in Structural Safety

    DEFF Research Database (Denmark)

    Konakli, Katerina; Faber, Michael Havbro

    2014-01-01

    of structural systems. In this context, experiments may refer to inspections or techniques of structural health monitoring. The Value of Information concept provides a powerful tool for determining whether the experimental cost is justified by the expected benefit and for identifying the optimal among different......Pre-posterior analysis can be used to assess the potential of an experiment to enhance decision making by providing information on parameters characterized by uncertainty. The present paper describes a framework for pre-posterior analysis for support of decisions related to maintenance...... and quality of information and the probabilistic dependencies between components of a system....

  16. RNA Secondary Structure Analysis Using RNAstructure.

    Science.gov (United States)

    Mathews, David H

    2014-06-17

    RNAstructure is a user-friendly program for the prediction and analysis of RNA secondary structure. It is available as a Web server, as a program with a graphical user interface, or as a set of command-line tools. The programs are available for Microsoft Windows, Macintosh OS X, or Linux. This unit provides protocols for RNA secondary structure prediction (using the Web server or the graphical user interface) and prediction of high-affinity oligonucleotide biding sites to a structured RNA target (using the graphical user interface). Copyright © 2014 John Wiley & Sons, Inc.

  17. Improving transient analysis technology for aircraft structures

    Science.gov (United States)

    Melosh, R. J.; Chargin, Mladen

    1989-01-01

    Aircraft dynamic analyses are demanding of computer simulation capabilities. The modeling complexities of semi-monocoque construction, irregular geometry, high-performance materials, and high-accuracy analysis are present. At issue are the safety of the passengers and the integrity of the structure for a wide variety of flight-operating and emergency conditions. The technology which supports engineering of aircraft structures using computer simulation is examined. Available computer support is briefly described and improvement of accuracy and efficiency are recommended. Improved accuracy of simulation will lead to a more economical structure. Improved efficiency will result in lowering development time and expense.

  18. Analysis of latent structures in linear systems

    DEFF Research Database (Denmark)

    Høskuldsson, Agnar

    2004-01-01

    that are useful, when studying latent structures. It is shown how loading weight vectors are generated and how they can be interpreted in analyzing the latent structure. It is shown how the covariance can be used to get useful ‘apriori’ information on the modeling task. Also some simple methods are presented...... to use for deciding if single or multiple latent structures should be used. The last part is about choosing the variables that should be used in the analysis. The traditional procedures to select variables to include in the model are presented and the insufficiencies of such approaches are demonstrated...

  19. Entity Authentication:Analysis using Structured Intuition

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Jensen, Christian D.

    2010-01-01

    In this paper, we propose a new method for the analysis that uses intuition of the analyst in a structured way. First we define entity authentication in terms of fine level authentication goals (FLAGs). Then we use some relevant structures in protocol narrations and use them to justify FLAGs...... for the protocol. All along this process, we discover vulnerabilities and unstated assumptions of the protocol. As the method is intuition based, the quality of results depends on the expertise of the security analyst, however, the structured intuition has two major advantages: Firstly we get a precise...

  20. Molecular structure-affinity relationship of bufadienolides and human serum albumin in vitro and molecular docking analysis.

    Directory of Open Access Journals (Sweden)

    Jing Zhou

    Full Text Available The development of bufadienolides as anti-tumor agents is limited due to poor pharmacokinetic properties regarding drug half-lives and toxicity in vivo. These serious factors might be improved by increasing the drug/albumin-binding ratio. This study therefore investigated the relationship between the structural properties of nine bufadienolides and their affinities for human serum albumin (HSA by a fluorescence spectroscopy-based analysis and molecular docking. Fluorescence quenching data showed that the interaction of each bufadienolide with HSA formed a non-fluorescent complex, while thermodynamic parameters revealed negative ΔS and ΔH values, corresponding to changes in enthalpy and entropy, respectively. The structural differences between the various bufadienolides markedly influenced their binding affinity for HSA. With the exception of a C = O bond at the C12 position that decreased the binding affinity for HSA, other polar groups tended to increase the affinity, especially a hydroxyl (OH group at assorted bufadienolide sites. The rank order of binding affinities for drugs with tri-hydroxyl groups was as follows: 11-OH > 5-OH > 16-OH; in addition, 16-acetoxy (OAc, 10-aldehyde and 14-epoxy constituents notably enhanced the binding affinity. Among these groups, 11-OH and 16-acetyl were especially important for a seamless interaction between the bufadienolides and HSA. Furthermore, molecular docking analysis revealed that either an 11-OH or a 16-OAc group spatially close to a five-membered lactone ring significantly facilitated the anchoring of these compounds within site I of the HSA pocket via hydrogen bonding (H-bonding with Tyr150 or Lys199, respectively. In summary, bufadienolide structure strongly affects binding with HSA, and 11-OH or 16-OAc groups improve the drug association with key amino acid residues. This information is valuable for the prospective development of bufadienolides with improved pharmacological profiles as novel

  1. Term Structure Analysis with Big Data

    DEFF Research Database (Denmark)

    Andreasen, Martin Møller; Christensen, Jens H.E.; Rudebusch, Glenn D.

    Analysis of the term structure of interest rates almost always takes a two-step approach. First, actual bond prices are summarized by interpolated synthetic zero-coupon yields, and second, a small set of these yields are used as the source data for further empirical examination. In contrast, we...

  2. A Dynamic Model for Energy Structure Analysis

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Energy structure is a complicated system concerning economic development, natural resources, technological innovation, ecological balance, social progress and many other elements. It is not easy to explain clearly the developmental mechanism of an energy system and the mutual relations between the energy system and its related environments by the traditional methods. It is necessary to develop a suitable dynamic model, which can reflect the dynamic characteristics and the mutual relations of the energy system and its related environments. In this paper, the historical development of China's energy structure was analyzed. A new quantitative analysis model was developed based on system dynamics principles through analysis of energy resources, and the production and consumption of energy in China and comparison with the world. Finally, this model was used to predict China's future energy structures under different conditions.

  3. Structural Analysis of Molecular Clouds: Dendrograms

    CERN Document Server

    Rosolowsky, E W; Kauffmann, J; Goodman, A A

    2008-01-01

    We demonstrate the utility of dendrograms at representing the essential features of the hierarchical structure of the isosurfaces for molecular line data cubes. The dendrogram of a data cube is an abstraction of the changing topology of the isosurfaces as a function of contour level. The ability to track hierarchical structure over a range of scales makes this analysis philosophically different from local segmentation algorithms like CLUMPFIND. Points in the dendrogram structure correspond to specific volumes in data cubes defined by their bounding isosurfaces. We further refine the technique by measuring the properties associated with each isosurface in the analysis allowing for a multiscale calculation of molecular gas properties. Using COMPLETE 13CO(1-0) data from the L1448 region in Perseus and mock observations of a simulated data cube, we identify regions that have a significant contribution by self-gravity to their energetics on a range of scales. We find evidence for self-gravitation on all spatial sc...

  4. Segmentation of histological structures for fractal analysis

    Science.gov (United States)

    Dixon, Vanessa; Kouznetsov, Alexei; Tambasco, Mauro

    2009-02-01

    Pathologists examine histology sections to make diagnostic and prognostic assessments regarding cancer based on deviations in cellular and/or glandular structures. However, these assessments are subjective and exhibit some degree of observer variability. Recent studies have shown that fractal dimension (a quantitative measure of structural complexity) has proven useful for characterizing structural deviations and exhibits great potential for automated cancer diagnosis and prognosis. Computing fractal dimension relies on accurate image segmentation to capture the architectural complexity of the histology specimen. For this purpose, previous studies have used techniques such as intensity histogram analysis and edge detection algorithms. However, care must be taken when segmenting pathologically relevant structures since improper edge detection can result in an inaccurate estimation of fractal dimension. In this study, we established a reliable method for segmenting edges from grayscale images. We used a Koch snowflake, an object of known fractal dimension, to investigate the accuracy of various edge detection algorithms and selected the most appropriate algorithm to extract the outline structures. Next, we created validation objects ranging in fractal dimension from 1.3 to 1.9 imitating the size, structural complexity, and spatial pixel intensity distribution of stained histology section images. We applied increasing intensity thresholds to the validation objects to extract the outline structures and observe the effects on the corresponding segmentation and fractal dimension. The intensity threshold yielding the maximum fractal dimension provided the most accurate fractal dimension and segmentation, indicating that this quantitative method could be used in an automated classification system for histology specimens.

  5. Knocking out multigene redundancies via cycles of sexual assortment and fluorescence selection.

    Science.gov (United States)

    Suzuki, Yo; St Onge, Robert P; Mani, Ramamurthy; King, Oliver D; Heilbut, Adrian; Labunskyy, Vyacheslav M; Chen, Weidong; Pham, Linda; Zhang, Lan V; Tong, Amy H Y; Nislow, Corey; Giaever, Guri; Gladyshev, Vadim N; Vidal, Marc; Schow, Peter; Lehár, Joseph; Roth, Frederick P

    2011-02-01

    Phenotypes that might otherwise reveal a gene's function can be obscured by genes with overlapping function. This phenomenon is best known within gene families, in which an important shared function may only be revealed by mutating all family members. Here we describe the 'green monster' technology that enables precise deletion of many genes. In this method, a population of deletion strains with each deletion marked by an inducible green fluorescent protein reporter gene, is subjected to repeated rounds of mating, meiosis and flow-cytometric enrichment. This results in the aggregation of multiple deletion loci in single cells. The green monster strategy is potentially applicable to assembling other engineered alterations in any species with sex or alternative means of allelic assortment. To test the technology, we generated a single broadly drug-sensitive strain of Saccharomyces cerevisiae bearing precise deletions of all 16 ATP-binding cassette transporters within clades associated with multidrug resistance.

  6. Stochastic Simulation Tool for Aerospace Structural Analysis

    Science.gov (United States)

    Knight, Norman F.; Moore, David F.

    2006-01-01

    Stochastic simulation refers to incorporating the effects of design tolerances and uncertainties into the design analysis model and then determining their influence on the design. A high-level evaluation of one such stochastic simulation tool, the MSC.Robust Design tool by MSC.Software Corporation, has been conducted. This stochastic simulation tool provides structural analysts with a tool to interrogate their structural design based on their mathematical description of the design problem using finite element analysis methods. This tool leverages the analyst's prior investment in finite element model development of a particular design. The original finite element model is treated as the baseline structural analysis model for the stochastic simulations that are to be performed. A Monte Carlo approach is used by MSC.Robust Design to determine the effects of scatter in design input variables on response output parameters. The tool was not designed to provide a probabilistic assessment, but to assist engineers in understanding cause and effect. It is driven by a graphical-user interface and retains the engineer-in-the-loop strategy for design evaluation and improvement. The application problem for the evaluation is chosen to be a two-dimensional shell finite element model of a Space Shuttle wing leading-edge panel under re-entry aerodynamic loading. MSC.Robust Design adds value to the analysis effort by rapidly being able to identify design input variables whose variability causes the most influence in response output parameters.

  7. EXPERIMENTAL MODAL ANALYSIS OF VISCO-ELASTICALLY DAMPED STRUCTURES

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    The form of the modal analysis of viscoelastically damped structures is simplified and this simplified form is similar to the form of the modal analysis of linear viscously damped structures. As a result of this simplified form, the experimental modal analysis methods of linear viscously damped structures are applied to the experimental modal analysis of viscoelastically damped structures.

  8. Organizing Products with Complements versus Substitutes: Effects on Store Preferences as a Function of Effort and Assortment Perceptions

    NARCIS (Netherlands)

    Diehl, K.; Herpen, van E.; Lamberton, C.

    2015-01-01

    Retailers often organize at least part of their assortment by displaying complementary products from different product categories together (e.g., a pair of pants with a shirt) rather than grouping items by product type (e.g., a pair of pants with other pants). However, little is known about how

  9. Effects of Early U.S. Compulsory Schooling Laws on Educational Assortative Mating: The Importance of Context.

    Science.gov (United States)

    Rauscher, Emily

    2015-08-01

    Modernization theory predicts that rising education should increase assortative mating by education and decrease sorting by race. Recent research suggests that effects of educational expansion depend on contextual factors, such as economic development. Using log-linear and log-multiplicative models of male household heads ages 36 to 75 in the 1940 U.S. census data--the first U.S. census with educational attainment information--I investigate how educational assortative mating changed with one instance of educational expansion: early U.S. compulsory school attendance laws. To improve on existing research and distinguish effects of expansion from changes due to particular years or cohorts, I capitalize on state variation in the timing of these compulsory laws (ranging from 1852 to 1918). Aggregate results suggest that compulsory laws had minimal impact on assortative mating. However, separate analyses by region (and supplemental analyses by race) reveal that assortative mating by education decreased with the laws in the South but increased in the North. Whether due to economic, legal, political, or other differences, results suggest that the implications of educational expansion for marital sorting depend on context. Contemporary implications are discussed in light of President Obama's 2012 suggested extension of compulsory schooling to age 18.

  10. Contagion of Suicidal Symptoms as a Function of Assortative Relating and Shared Relationship Stress in College Roommates.

    Science.gov (United States)

    Joiner, Thomas E., Jr.

    2003-01-01

    Vulnerable people may become susceptible to the effects of shared life stress. To test this possibility, undergraduates and their roommates completed questionnaires on suicidality and stress. Consistent with an assortative relating process, roommates who chose to room together were more similar on a suicide index than were roommates who were…

  11. Organizing Products with Complements versus Substitutes: Effects on Store Preferences as a Function of Effort and Assortment Perceptions

    NARCIS (Netherlands)

    Diehl, K.; Herpen, van E.; Lamberton, C.

    2015-01-01

    Retailers often organize at least part of their assortment by displaying complementary products from different product categories together (e.g., a pair of pants with a shirt) rather than grouping items by product type (e.g., a pair of pants with other pants). However, little is known about how reta

  12. Parasite-stress promotes in-group assortative sociality: the cases of strong family ties and heightened religiosity.

    Science.gov (United States)

    Fincher, Corey L; Thornhill, Randy

    2012-04-01

    Throughout the world people differ in the magnitude with which they value strong family ties or heightened religiosity. We propose that this cross-cultural variation is a result of a contingent psychological adaptation that facilitates in-group assortative sociality in the face of high levels of parasite-stress while devaluing in-group assortative sociality in areas with low levels of parasite-stress. This is because in-group assortative sociality is more important for the avoidance of infection from novel parasites and for the management of infection in regions with high levels of parasite-stress compared with regions of low infectious disease stress. We examined this hypothesis by testing the predictions that there would be a positive association between parasite-stress and strength of family ties or religiosity. We conducted this study by comparing among nations and among states in the United States of America. We found for both the international and the interstate analyses that in-group assortative sociality was positively associated with parasite-stress. This was true when controlling for potentially confounding factors such as human freedom and economic development. The findings support the parasite-stress theory of sociality, that is, the proposal that parasite-stress is central to the evolution of social life in humans and other animals.

  13. Accuracy in estimation of timber assortments and stem distribution - A comparison of airborne and terrestrial laser scanning techniques

    Science.gov (United States)

    Kankare, Ville; Vauhkonen, Jari; Tanhuanpää, Topi; Holopainen, Markus; Vastaranta, Mikko; Joensuu, Marianna; Krooks, Anssi; Hyyppä, Juha; Hyyppä, Hannu; Alho, Petteri; Viitala, Risto

    2014-11-01

    Detailed information about timber assortments and diameter distributions is required in forest management. Forest owners can make better decisions concerning the timing of timber sales and forest companies can utilize more detailed information to optimize their wood supply chain from forest to factory. The objective here was to compare the accuracies of high-density laser scanning techniques for the estimation of tree-level diameter distribution and timber assortments. We also introduce a method that utilizes a combination of airborne and terrestrial laser scanning in timber assortment estimation. The study was conducted in Evo, Finland. Harvester measurements were used as a reference for 144 trees within a single clear-cut stand. The results showed that accurate tree-level timber assortments and diameter distributions can be obtained, using terrestrial laser scanning (TLS) or a combination of TLS and airborne laser scanning (ALS). Saw log volumes were estimated with higher accuracy than pulpwood volumes. The saw log volumes were estimated with relative root-mean-squared errors of 17.5% and 16.8% with TLS and a combination of TLS and ALS, respectively. The respective accuracies for pulpwood were 60.1% and 59.3%. The differences in the bucking method used also caused some large errors. In addition, tree quality factors highly affected the bucking accuracy, especially with pulpwood volume.

  14. Variation in sexual dimorphism and assortative mating do not predict genetic divergence in the sexually dimorphic Goodeid fish Girardinichthys multiradiatus

    Institute of Scientific and Technical Information of China (English)

    C.MAC(I)AS GARCIA; G SMITH; C.GONZ(A)LEZ ZUARTH; J.A.GRAVES; M.G.RITCHIE

    2012-01-01

    Sexual dimorphism is often used as a proxy for the intensity of sexual selection in comparative studies of sexual selection and diversification.The Mexican Goodeinae are a group of livebearing freshwater fishes with large variation between species in sexual dimorphism in body shape.Previously we found an association between variation in morphological sexual dimorphism between species and the amount of gene flow within populations in the Goodeinae.Here we have examined if morphological differentiation within a single dimorphic species is related to assortative mating or gene flow between populations.In the Amarillo fish Girardinichthys multiradiatus studies have shown that exaggerated male fins are targets of female preferences.We find that populations of the species differ in the level of sexual dimorphism displayed due to faster evolution of differences in male than female morphology.However,this does not predict variation in assortative mating tests in the laboratory; in fact differences in male morphology are negatively correlated with assortative mating.Microsatellite markers reveal significant genetic differences between populations.However,gene flow is not predicted by either morphological differences or assortative mating.Rather,it demonstrates a pattern of isolation by distance with greater differentiation between watersheds.We discuss the caveats of predicting behavioural and genetic divergence from so-called proxies of sexual selection.

  15. Static Structural and Modal Analysis Using Isogeometric Analysis

    Science.gov (United States)

    Gondegaon, Sangamesh; Voruganti, Hari K.

    2016-12-01

    Isogeometric Analysis (IGA) is a new analysis method for unification of Computer Aided Design (CAD) and Computer Aided Engineering (CAE). With the use of NURBS basis functions for both modelling and analysis, the bottleneck of meshing is avoided and a seamless integration is achieved. The CAD and computational geometry concepts in IGA are new to the analysis community. Though, there is a steady growth of literature, details of calculations, explanations and examples are not reported. The content of the paper is complimentary to the existing literature and addresses the gaps. It includes summary of the literature, overview of the methodology, step-by-step calculations and Matlab codes for example problems in static structural and modal analysis in 1-D and 2-D. At appropriate places, comparison with the Finite Element Analysis (FEM) is also included, so that those familiar with FEM can appreciate IGA better.

  16. Association between autozygosity and major depression: stratification due to religious assortment.

    Science.gov (United States)

    Abdellaoui, Abdel; Hottenga, Jouke-Jan; Xiao, Xiangjun; Scheet, Paul; Ehli, Erik A; Davies, Gareth E; Hudziak, James J; Smit, Dirk J A; Bartels, Meike; Willemsen, Gonneke; Brooks, Andrew; Sullivan, Patrick F; Smit, Johannes H; de Geus, Eco J; Penninx, Brenda W J H; Boomsma, Dorret I

    2013-11-01

    The effects of inbreeding on the health of offspring can be studied by measuring genome-wide autozygosity as the proportion of the genome in runs of homozygosity (F roh) and relate F roh to outcomes such as psychiatric phenotypes. To successfully conduct these studies, the main patterns of variation for genome-wide autozygosity between and within populations should be well understood and accounted for. Within population variation was investigated in the Dutch population by comparing autozygosity between religious and non-religious groups. The Netherlands have a history of societal segregation and assortment based on religious affiliation, which may have increased parental relatedness within religious groups. Religion has been associated with several psychiatric phenotypes, such as major depressive disorder (MDD). We investigated whether there is an association between autozygosity and MDD, and the extent to which this association can be explained by religious affiliation. All F roh analyses included adjustment for ancestry-informative principal components (PCs) and geographic factors. Religious affiliation was significantly associated with autozygosity, showing that F roh has the ability to capture within population differences that are not captured by ancestry-informative PCs or geographic factors. The non-religious group had significantly lower F roh values and significantly more MDD cases, leading to a nominally significant negative association between autozygosity and depression. After accounting for religious affiliation, MDD was not associated with F roh, indicating that the relation between MDD and inbreeding was due to stratification. This study shows how past religious assortment and recent secularization can have genetic consequences in a relatively small country. This warrants accounting for the historical social context and its effects on genetic variation in association studies on psychiatric and other related traits.

  17. Combination of structural reliability and interval analysis

    Institute of Scientific and Technical Information of China (English)

    Zhiping Qiu; Di Yang; saac Elishakoff

    2008-01-01

    In engineering applications,probabilistic reliability theory appears to be presently the most important method,however,in many cases precise probabilistic reliability theory cannot be considered as adequate and credible model of the real state of actual affairs.In this paper,we developed a hybrid of probabilistic and non-probabilistic reliability theory,which describes the structural uncertain parameters as interval variables when statistical data are found insufficient.By using the interval analysis,a new method for calculating the interval of the structural reliability as well as the reliability index is introduced in this paper,and the traditional probabilistic theory is incorporated with the interval analysis.Moreover,the new method preserves the useful part of the traditional probabilistic reliability theory,but removes the restriction of its strict requirement on data acquisition.Example is presented to demonstrate the feasibility and validity of the proposed theory.

  18. Numerical Limit Analysis of Reinforced Concrete Structures

    DEFF Research Database (Denmark)

    Larsen, Kasper Paaske

    methods provide engineers with valuable tools for limit sta- te analysis, their application becomes difficult with increased structural complexity. The main challenge is to solve the optimization problem posed by the extremum principles. This thesis is a study of how numerical methods can be used to solve...... limit state analysis problems. The work focuses on determination of the load bearing capacity of reinforced concrete structures by employing the lower bound theorem and a finite element method using equilibrium elements is developed. The recent year’s development within the field of convex optimization...... is developed for improved perfor- mance. An example is given in which an inverse T-beam is analyzed and the numerical results are compared to laboratory tests. The third and final element is a plane shell element capable of modeling membrane and plate bending behavior. The element employs a layered disk...

  19. Reliability Analysis of Elasto-Plastic Structures

    DEFF Research Database (Denmark)

    1984-01-01

    . Failure of this type of system is defined either as formation of a mechanism or by failure of a prescribed number of elements. In the first case failure is independent of the order in which the elements fail, but this is not so by the second definition. The reliability analysis consists of two parts...... are described and the two definitions of failure can be used by the first formulation, but only the failure definition based on formation of a mechanism by the second formulation. The second part of the reliability analysis is an estimate of the failure probability for the structure on the basis...... are obtained if the failure mechanisms are used. Lower bounds can be calculated on the basis of series systems where the elements are the non-failed elements in a non-failed structure (see Augusti & Baratta [3])....

  20. Limit analysis of solid reinforced concrete structures

    DEFF Research Database (Denmark)

    Larsen, Kasper Paaske

    2009-01-01

    element for lower bound analysis of reinforced concrete structures is presented. The method defines the stress state at a point within the solid as a combination of concrete- and reinforcement stresses and yield criterions are applied to the stress components separately. This method allows for orthotropic......Recent studies have shown that Semidefinite Programming (SDP) can be used effectively for limit analysis of isotropic cohesive-frictional continuums using the classical Mohr-Coulomb yield criterion. In this paper we expand on this previous research by adding reinforcement to the model and a solid...... reinforcement and it is therefore possible to analyze structures with complex reinforcement layouts. Tests are conducted to validate the method against well-known analytical solutions....

  1. EURO AREA FISCAL STRUCTURES. A MULTIVARIATE ANALYSIS

    Directory of Open Access Journals (Sweden)

    HURDUZEU Gheorghe

    2014-07-01

    taxes on income of corporations and taxes on income of individuals and households and other current taxes. Actual social contributions were also split into employer’s actual contributions, employee’s social contributions and social contributions of self- and non-employed persons. As the primary data analysis revealed many differences between Euro Area member states, but also similarities concerning various fiscal aggregates, we completed the analysis through multidimensional analysis, with the aims of classifying Euro Area member states into subgroups with similar fiscal structures. Taking into consideration the above mentioned variables, we used cluster analysis in order to determine which member states have similar fiscal structures and which are the main similarities that characterize Euro Area in this respect.

  2. Non Linear Seismic Analysis of Masonry Structures

    Directory of Open Access Journals (Sweden)

    Sirajuddin, M

    2011-12-01

    Full Text Available Nowadays, even though many new construction techniques have been introduced, masonry has got its own importance in building industry. Masonry structures fail miserably under lateral loading conditions like earth quakes and impact loads. The occurrence of recent earthquakes in India and in different parts of the world have highlighted that most of the loss of human lives and damage to property have been due to the collapse of masonry structures. Though an earthquake could not be prevented, the loss of life and property could be minimized, if necessary steps could be taken to reduce the damages on the existing masonry structures. This paper investigates the application ofNonlinear Seismic Analysis of a masonry building using ANSYS software and check the efficacy of retrofit measuresto protect the existing building.

  3. MBS Analysis Of Kinetic Structures Using ADAMS

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Nielsen, Søren R.K.

    2009-01-01

    The present paper considers multibody system (MBS) analysis of kinetic structures using the software package ADAMS. Deployable, foldable, expandable and reconfigurable kinetic structures can provide a change in the geometric morphology of the envelope by contributing to making it adaptable to e.......g. changing external climate factors, in order to improve the indoor climate performance of the building. The derivation of equations of motion for such spatial mechanical systems is a challenging issue in scientific community. However, with new symbolic tools one can automatically derive equations in so......-called multibody system (MBS) formalism. The present paper considers MBS modeling of kinetic architectural structures using the software packages ADAMS. As a result, it is found that symbolic MBS simulation tools facilitate a useful evaluation environment for MBS users during a design phase of responsive kinetic...

  4. Linking advanced fracture models to structural analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chiesa, Matteo

    2001-07-01

    Shell structures with defects occur in many situations. The defects are usually introduced during the welding process necessary for joining different parts of the structure. Higher utilization of structural materials leads to a need for accurate numerical tools for reliable prediction of structural response. The direct discretization of the cracked shell structure with solid finite elements in order to perform an integrity assessment of the structure in question leads to large size problems, and makes such analysis infeasible in structural application. In this study a link between local material models and structural analysis is outlined. An ''ad hoc'' element formulation is used in order to connect complex material models to the finite element framework used for structural analysis. An improved elasto-plastic line spring finite element formulation, used in order to take cracks into account, is linked to shell elements which are further linked to beam elements. In this way one obtain a global model of the shell structure that also accounts for local flexibilities and fractures due to defects. An important advantage with such an approach is a direct fracture mechanics assessment e.g. via computed J-integral or CTOD. A recent development in this approach is the notion of two-parameter fracture assessment. This means that the crack tip stress tri-axiality (constraint) is employed in determining the corresponding fracture toughness, giving a much more realistic capacity of cracked structures. The present thesis is organized in six research articles and an introductory chapter that reviews important background literature related to this work. Paper I and II address the performance of shell and line spring finite elements as a cost effective tool for performing the numerical calculation needed to perform a fracture assessment. In Paper II a failure assessment, based on the testing of a constraint-corrected fracture mechanics specimen under tension, is

  5. TLP hull structural design and analysis

    Institute of Scientific and Technical Information of China (English)

    Yang Jiahui; Ren Michael

    2013-01-01

    Tension leg platform (TLP) has been one of the most favorite deep-water platform concepts for offshore oil and gas field exploration and development.As of now,a total of 24 TLPs have been installed worldwide with 3 more to be installed in the near future and 5 more under design.Most of these installations are in the Gulf of Mexico (GoM).Water depths for these TLP installations range from 150 m to 1 600 m.It is highly expected that China will have her first TLP designed,fabricated,and installed in the very near future.In order to satisfy the need for a unified hull structural design practice,this paper presents the design philosophy of a conventional TLP hull structure with emphases on critical structural components design and analysis methodologies.

  6. A Structural Analysis of European Union Economy

    Directory of Open Access Journals (Sweden)

    Liliana DUGULEANĂ

    2016-09-01

    Full Text Available Based on the input-output analysis, the paper characterizes the structure of European economy in 2010 and 2011, on six main economic sectors. The sectoral structures of backward and forward linkages, and their absolute effects starting from the final demand, were compared with the real structures of sectors output, sectoral imports, sectoral value added, in 2011 face to 2010. The changes in final demand and in sectoral output can be analyzed in the propagation processes of the inter-sectoral economic flows, and allow us to know the behavior at macroeconomic level of European economy. The common economic policies at European level can be undertaken to keep the equilibrium between different sectors, to stimulate the sectors with high levels of productivity, to ensure the efficiency of using the resources, and the sustainability of economic development, which are the purposes of a smart development.

  7. Structural Analysis About a New Solar Sail

    Institute of Scientific and Technical Information of China (English)

    ZHENG Jinjin; SHENG Zhaoyu; ZHOU Hongjun; HUANG Wenhao; SHENG Lianguan

    2009-01-01

    The article presents a structural analysis of a new space probe-solar sail. It was deployed successfully on ground. The loads for an outer space mission was introduced and expressed with equation. As a special state, the largest load around earth was used to analyze the model by the finite element method. Some results about strain and stress was obtained after setting some initial parameters. Compared to the results in the literature, the results presented here are significant.

  8. Structural analysis at aircraft conceptual design stage

    Science.gov (United States)

    Mansouri, Reza

    In the past 50 years, computers have helped by augmenting human efforts with tremendous pace. The aircraft industry is not an exception. Aircraft industry is more than ever dependent on computing because of a high level of complexity and the increasing need for excellence to survive a highly competitive marketplace. Designers choose computers to perform almost every analysis task. But while doing so, existing effective, accurate and easy to use classical analytical methods are often forgotten, which can be very useful especially in the early phases of the aircraft design where concept generation and evaluation demands physical visibility of design parameters to make decisions [39, 2004]. Structural analysis methods have been used by human beings since the very early civilization. Centuries before computers were invented; the pyramids were designed and constructed by Egyptians around 2000 B.C, the Parthenon was built by the Greeks, around 240 B.C, Dujiangyan was built by the Chinese. Persepolis, Hagia Sophia, Taj Mahal, Eiffel tower are only few more examples of historical buildings, bridges and monuments that were constructed before we had any advancement made in computer aided engineering. Aircraft industry is no exception either. In the first half of the 20th century, engineers used classical method and designed civil transport aircraft such as Ford Tri Motor (1926), Lockheed Vega (1927), Lockheed 9 Orion (1931), Douglas DC-3 (1935), Douglas DC-4/C-54 Skymaster (1938), Boeing 307 (1938) and Boeing 314 Clipper (1939) and managed to become airborne without difficulty. Evidencing, while advanced numerical methods such as the finite element analysis is one of the most effective structural analysis methods; classical structural analysis methods can also be as useful especially during the early phase of a fixed wing aircraft design where major decisions are made and concept generation and evaluation demands physical visibility of design parameters to make decisions

  9. Remote geologic structural analysis of Yucca Flat

    Energy Technology Data Exchange (ETDEWEB)

    Foley, M.G.; Heasler, P.G.; Hoover, K.A. (Pacific Northwest Lab., Richland, WA (United States)); Rynes, N.J. (Northern Illinois Univ., De Kalb, IL (United States)); Thiessen, R.L.; Alfaro, J.L. (Washington State Univ., Pullman, WA (United States))

    1991-12-01

    The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA's characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL's RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

  10. Remote geologic structural analysis of Yucca Flat

    Energy Technology Data Exchange (ETDEWEB)

    Foley, M.G.; Heasler, P.G.; Hoover, K.A. [Pacific Northwest Lab., Richland, WA (United States); Rynes, N.J. [Northern Illinois Univ., De Kalb, IL (United States); Thiessen, R.L.; Alfaro, J.L. [Washington State Univ., Pullman, WA (United States)

    1991-12-01

    The Remote Geologic Analysis (RGA) system was developed by Pacific Northwest Laboratory (PNL) to identify crustal structures that may affect seismic wave propagation from nuclear tests. Using automated methods, the RGA system identifies all valleys in a digital elevation model (DEM), fits three-dimensional vectors to valley bottoms, and catalogs all potential fracture or fault planes defined by coplanar pairs of valley vectors. The system generates a cluster hierarchy of planar features having greater-than-random density that may represent areas of anomalous topography manifesting structural control of erosional drainage development. Because RGA uses computer methods to identify zones of hypothesized control of topography, ground truth using a well-characterized test site was critical in our evaluation of RGA`s characterization of inaccessible test sites for seismic verification studies. Therefore, we applied RGA to a study area centered on Yucca Flat at the Nevada Test Site (NTS) and compared our results with both mapped geology and geologic structures and with seismic yield-magnitude models. This is the final report of PNL`s RGA development project for peer review within the US Department of Energy Office of Arms Control (OAC) seismic-verification community. In this report, we discuss the Yucca Flat study area, the analytical basis of the RGA system and its application to Yucca Flat, the results of the analysis, and the relation of the analytical results to known topography, geology, and geologic structures. 41 refs., 39 figs., 2 tabs.

  11. GST M1-T1 null allele frequency patterns in geographically assorted human populations: a phylogenetic approach.

    Science.gov (United States)

    Kasthurinaidu, Senthilkumar Pitchalu; Ramasamy, Thirumurugan; Ayyavoo, Jayachitra; Dave, Dhvani Kirtikumar; Adroja, Divya Anantray

    2015-01-01

    Genetic diversity in drug metabolism and disposition is mainly considered as the outcome of the inter-individual genetic variation in polymorphism of drug-xenobiotic metabolizing enzyme (XME). Among the XMEs, glutathione-S-transferases (GST) gene loci are an important candidate for the investigation of diversity in allele frequency, as the deletion mutations in GST M1 and T1 genotypes are associated with various cancers and genetic disorders of all major Population Affiliations (PAs). Therefore, the present population based phylogenetic study was focused to uncover the frequency distribution pattern in GST M1 and T1 null genotypes among 45 Geographically Assorted Human Populations (GAHPs). The frequency distribution pattern for GST M1 and T1 null alleles have been detected in this study using the data derived from literatures representing 44 populations affiliated to Africa, Asia, Europe, South America and the genome of PA from Gujarat, a region in western India. Allele frequency counting for Gujarat PA and scattered plot analysis for geographical distribution among the PAs were performed in SPSS-21. The GST M1 and GST T1 null allele frequencies patterns of the PAs were computed in Seqboot, Gendist program of Phylip software package (3.69 versions) and Unweighted Pair Group method with Arithmetic Mean in Mega-6 software. Allele frequencies from South African Xhosa tribe, East African Zimbabwe, East African Ethiopia, North African Egypt, Caucasian, South Asian Afghanistan and South Indian Andhra Pradesh have been identified as the probable seven patterns among the 45 GAHPs investigated in this study for GST M1-T1 null genotypes. The patternized null allele frequencies demonstrated in this study for the first time addresses the missing link in GST M1-T1 null allele frequencies among GAHPs.

  12. GST M1-T1 null allele frequency patterns in geographically assorted human populations: a phylogenetic approach.

    Directory of Open Access Journals (Sweden)

    Senthilkumar Pitchalu Kasthurinaidu

    Full Text Available Genetic diversity in drug metabolism and disposition is mainly considered as the outcome of the inter-individual genetic variation in polymorphism of drug-xenobiotic metabolizing enzyme (XME. Among the XMEs, glutathione-S-transferases (GST gene loci are an important candidate for the investigation of diversity in allele frequency, as the deletion mutations in GST M1 and T1 genotypes are associated with various cancers and genetic disorders of all major Population Affiliations (PAs. Therefore, the present population based phylogenetic study was focused to uncover the frequency distribution pattern in GST M1 and T1 null genotypes among 45 Geographically Assorted Human Populations (GAHPs. The frequency distribution pattern for GST M1 and T1 null alleles have been detected in this study using the data derived from literatures representing 44 populations affiliated to Africa, Asia, Europe, South America and the genome of PA from Gujarat, a region in western India. Allele frequency counting for Gujarat PA and scattered plot analysis for geographical distribution among the PAs were performed in SPSS-21. The GST M1 and GST T1 null allele frequencies patterns of the PAs were computed in Seqboot, Gendist program of Phylip software package (3.69 versions and Unweighted Pair Group method with Arithmetic Mean in Mega-6 software. Allele frequencies from South African Xhosa tribe, East African Zimbabwe, East African Ethiopia, North African Egypt, Caucasian, South Asian Afghanistan and South Indian Andhra Pradesh have been identified as the probable seven patterns among the 45 GAHPs investigated in this study for GST M1-T1 null genotypes. The patternized null allele frequencies demonstrated in this study for the first time addresses the missing link in GST M1-T1 null allele frequencies among GAHPs.

  13. Industrial entrepreneurial network: Structural and functional analysis

    Science.gov (United States)

    Medvedeva, M. A.; Davletbaev, R. H.; Berg, D. B.; Nazarova, J. J.; Parusheva, S. S.

    2016-12-01

    Structure and functioning of two model industrial entrepreneurial networks are investigated in the present paper. One of these networks is forming when implementing an integrated project and consists of eight agents, which interact with each other and external environment. The other one is obtained from the municipal economy and is based on the set of the 12 real business entities. Analysis of the networks is carried out on the basis of the matrix of mutual payments aggregated over the certain time period. The matrix is created by the methods of experimental economics. Social Network Analysis (SNA) methods and instruments were used in the present research. The set of basic structural characteristics was investigated: set of quantitative parameters such as density, diameter, clustering coefficient, different kinds of centrality, and etc. They were compared with the random Bernoulli graphs of the corresponding size and density. Discovered variations of random and entrepreneurial networks structure are explained by the peculiarities of agents functioning in production network. Separately, were identified the closed exchange circuits (cyclically closed contours of graph) forming an autopoietic (self-replicating) network pattern. The purpose of the functional analysis was to identify the contribution of the autopoietic network pattern in its gross product. It was found that the magnitude of this contribution is more than 20%. Such value allows using of the complementary currency in order to stimulate economic activity of network agents.

  14. Analysis of waveguiding properties of VCSEL structures

    Energy Technology Data Exchange (ETDEWEB)

    Erteza, I.A. [Sandia National Labs., Albuquerque, NM (United States). Exploratory Systems Development Center

    1996-09-01

    In this paper, the authors explore the feasibility of using the distributed Bragg reflector, grown on the substrate for a VCSEL (Vertical Cavity Surface Emitting Laser), to provide waveguiding within the substrate. This waveguiding could serve as an interconnection among VCSELs in an array. Before determining the feasibility of waveguide interconnected VCSELs, two analysis methods are presented and evaluated for their applicability to this problem. The implementations in Mathematica of both these methods are included. Results of the analysis show that waveguiding in VCSEL structures is feasible. Some of the many possible uses of waveguide interconnected VCSELs are also briefly discussed. The tools and analysis presented in this report can be used to evaluate such system concepts and to do detailed design calculations.

  15. Finite Element Vibration and Dynamic Response Analysis of Engineering Structures

    Directory of Open Access Journals (Sweden)

    Jaroslav Mackerle

    2000-01-01

    Full Text Available This bibliography lists references to papers, conference proceedings, and theses/dissertations dealing with finite element vibration and dynamic response analysis of engineering structures that were published from 1994 to 1998. It contains 539 citations. The following types of structures are included: basic structural systems; ground structures; ocean and coastal structures; mobile structures; and containment structures.

  16. BASE Flexible Array Preliminary Lithospheric Structure Analysis

    Science.gov (United States)

    Yeck, W. L.; Sheehan, A. F.; Anderson, M. L.; Siddoway, C. S.; Erslev, E.; Harder, S. H.; Miller, K. C.

    2009-12-01

    The Bighorns Arch Seismic Experiment (BASE) is a Flexible Array experiment integrated with EarthScope. The goal of BASE is to develop a better understanding of how basement-involved foreland arches form and what their link is to plate tectonic processes. To achieve this goal, the crustal structure under the Bighorn Mountain range, Bighorn Basin, and Powder River Basin of northern Wyoming and southern Montana are investigated through the deployment of 35 broadband seismometers, 200 short period seismometers, 1600 “Texan” instruments using active sources and 800 “Texan” instruments monitoring passive sources, together with field structural analysis of brittle structures. The novel combination of these approaches and anticipated simultaneous data inversion will give a detailed structural crustal image of the Bighorn region at all levels of the crust. Four models have been proposed for the formation of the Bighorn foreland arch: subhorizontal detachment within the crust, lithospheric buckling, pure shear lithospheric thickening, and fault blocks defined by lithosphere-penetrating thrust faults. During the summer of 2009, we deployed 35 broadband instruments, which have already recorded several magnitude 7+ teleseismic events. Through P wave receiver function analysis of these 35 stations folded in with many EarthScope Transportable Array stations in the region, we present a preliminary map of the Mohorovicic discontinuity. This crustal map is our first test of how the unique Moho geometries predicted by the four hypothesized models of basement involved arches fit seismic observations for the Bighorn Mountains. In addition, shear-wave splitting analysis for our first few recorded teleseisms helps us determine if strong lithospheric deformation is preserved under the range. These analyses help lead us to our final goal, a complete 4D (3D spatial plus temporal) lithospheric-scale model of arch formation which will advance our understanding of the mechanisms

  17. Structural Analysis of Sandwich Foam Panels

    Energy Technology Data Exchange (ETDEWEB)

    Kosny, Jan [ORNL; Huo, X. Sharon [Tennessee Technological University

    2010-04-01

    The Sandwich Panel Technologies including Structural Insulated Panels (SIPs) can be used to replace the conventional wooden-frame construction method. The main purpose of this Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and SGI Venture, Inc. was to design a novel high R-value type of metal sandwich panelized technology. This CRADA project report presents design concept discussion and numerical analysis results from thermal performance study of this new building envelope system. The main objective of this work was to develop a basic concept of a new generation of wall panel technologies which will have R-value over R-20 will use thermal mass to improve energy performance in cooling dominated climates and will be 100% termite resistant. The main advantages of using sandwich panels are as follows: (1) better energy saving structural panels with high and uniform overall wall R-value across the elevation that could not be achieved in traditional walls; and (2) reducing the use of raw materials or need for virgin lumber. For better utilization of these Sandwich panels, engineers need to have a thorough understanding of the actual performance of the panels and system. Detailed analysis and study on the capacities and deformation of individual panels and its assembly have to be performed to achieve that goal. The major project activity was to conduct structural analysis of the stresses, strains, load capacities, and deformations of individual sandwich components under various load cases. The analysis simulated the actual loading conditions of the regular residential building and used actual material properties of the steel facings and foam.

  18. Molecular Eigensolution Symmetry Analysis and Fine Structure

    Directory of Open Access Journals (Sweden)

    William G. Harter

    2013-01-01

    Full Text Available Spectra of high-symmetry molecules contain fine and superfine level cluster structure related to J-tunneling between hills and valleys on rovibronic energy surfaces (RES. Such graphic visualizations help disentangle multi-level dynamics, selection rules, and state mixing effects including widespread violation of nuclear spin symmetry species. A review of RES analysis compares it to that of potential energy surfaces (PES used in Born-Oppenheimer approximations. Both take advantage of adiabatic coupling in order to visualize Hamiltonian eigensolutions. RES of symmetric and D2 asymmetric top rank-2-tensor Hamiltonians are compared with Oh spherical top rank-4-tensor fine-structure clusters of 6-fold and 8-fold tunneling multiplets. Then extreme 12-fold and 24-fold multiplets are analyzed by RES plots of higher rank tensor Hamiltonians. Such extreme clustering is rare in fundamental bands but prevalent in hot bands, and analysis of its superfine structure requires more efficient labeling and a more powerful group theory. This is introduced using elementary examples involving two groups of order-6 (C6 and D3~C3v, then applied to families of Oh clusters in SF6 spectra and to extreme clusters.

  19. Structural dynamic analysis of composite beams

    Science.gov (United States)

    Suresh, J. K.; Venkatesan, C.; Ramamurti, V.

    1990-12-01

    In the treatment of the structural dynamic problem of composite materials, two alternate types of formulations, based on the elastic modulus and compliance quantities, exist in the literature. The definitions of the various rigidities are observed to differ in these two approaches. Following these two types of formulation, the structural dynamic characteristics of a composite beam are analyzed. The results of the analysis are compared with those available in the literature. Based on the comparison, the influence of the warping function in defining the coupling terms in the modulus approach and also on the natural frequencies of the beam has been identified. It is found from the analysis that, in certain cases, the difference between the results of the two approaches is appreciable. These differences may be attributed to the constraints imposed on the deformation and flexibility of the beam by the choice of the description of the warping behaviour. Finally, the influence of material properties on the structural dynamic characteristics of the beam is studied for different composites for various angles of orthotropy.

  20. Nonlinear frequency response analysis of structural vibrations

    Science.gov (United States)

    Weeger, Oliver; Wever, Utz; Simeon, Bernd

    2014-12-01

    In this paper we present a method for nonlinear frequency response analysis of mechanical vibrations of 3-dimensional solid structures. For computing nonlinear frequency response to periodic excitations, we employ the well-established harmonic balance method. A fundamental aspect for allowing a large-scale application of the method is model order reduction of the discretized equation of motion. Therefore we propose the utilization of a modal projection method enhanced with modal derivatives, providing second-order information. For an efficient spatial discretization of continuum mechanics nonlinear partial differential equations, including large deformations and hyperelastic material laws, we employ the concept of isogeometric analysis. Isogeometric finite element methods have already been shown to possess advantages over classical finite element discretizations in terms of higher accuracy of numerical approximations in the fields of linear vibration and static large deformation analysis. With several computational examples, we demonstrate the applicability and accuracy of the modal derivative reduction method for nonlinear static computations and vibration analysis. Thus, the presented method opens a promising perspective on application of nonlinear frequency analysis to large-scale industrial problems.

  1. SUPPORT VECTOR MACHINE FOR STRUCTURAL RELIABILITY ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    LI Hong-shuang; L(U) Zhen-zhou; YUE Zhu-feng

    2006-01-01

    Support vector machine (SVM) was introduced to analyze the reliability of the implicit performance function, which is difficult to implement by the classical methods such as the first order reliability method (FORM) and the Monte Carlo simulation (MCS). As a classification method where the underlying structural risk minimization inference rule is employed, SVM possesses excellent learning capacity with a small amount of information and good capability of generalization over the complete data. Hence,two approaches, i.e., SVM-based FORM and SVM-based MCS, were presented for the structural reliability analysis of the implicit limit state function. Compared to the conventional response surface method (RSM) and the artificial neural network (ANN), which are widely used to replace the implicit state function for alleviating the computation cost,the more important advantages of SVM are that it can approximate the implicit function with higher precision and better generalization under the small amount of information and avoid the "curse of dimensionality". The SVM-based reliability approaches can approximate the actual performance function over the complete sampling data with the decreased number of the implicit performance function analysis (usually finite element analysis), and the computational precision can satisfy the engineering requirement, which are demonstrated by illustrations.

  2. Fiber structural analysis by synchrotron radiation

    CERN Document Server

    Kojima, J I; Kikutani, T

    2003-01-01

    Topics of fiber structural analysis by synchrotron radiation are explained. There are only three synchrotron radiation facilities in the world, SPring-8 (Super Photon ring-8) in Japan, APS (Advanced Photon Source) in U.S.A. and ESRF (European Synchrotron Radiation Facility) in France. Online measurement of melt spinning process of PET and Nylon6 is explained in detail. Polypropylene and PBO (poly-p-phenylenebenzobisoxazole) was measured by WAXD (Wide Angle X-ray Diffraction)/SAXS (Small Angle X-ray Scattering) at the same time. Some examples of measure of drawing process of fiber are described. The structure formation process of spider's thread was measured. Micro beam of X-ray of synchrotron facility was improved and it attained to 65nm small angle resolving power by 10 mu m beamsize. (S.Y.)

  3. A Case Study on Methodological Approaches to Conversation Analysis

    Institute of Scientific and Technical Information of China (English)

    廉莲

    2014-01-01

    Taking a piece of social interaction as the object of the study, some basic and brief analysis on how meaning is negotiat-ed is offered from both structural and functional perspectives. The potential purpose is to provide readers with a maybe rough but clear presentation of those assorted methods used in conversation analysis. Out of the presentation is developed a possibility for language learners as well as teachers to be more aware of the differences and also the interrelations among these methodological approaches to conversation analysis, which may be of some relevance to teaching practice.

  4. Probabilistic analysis of linear elastic cracked structures

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    This paper presents a probabilistic methodology for linear fracture mechanics analysis of cracked structures. The main focus is on probabilistic aspect related to the nature of crack in material. The methodology involves finite element analysis; statistical models for uncertainty in material properties, crack size, fracture toughness and loads; and standard reliability methods for evaluating probabilistic characteristics of linear elastic fracture parameter. The uncertainty in the crack size can have a significant effect on the probability of failure, particularly when the crack size has a large coefficient of variation. Numerical example is presented to show that probabilistic methodology based on Monte Carlo simulation provides accurate estimates of failure probability for use in linear elastic fracture mechanics.

  5. Rhetorical structure theory and text analysis

    Science.gov (United States)

    Mann, William C.; Matthiessen, Christian M. I. M.; Thompson, Sandra A.

    1989-11-01

    Recent research on text generation has shown that there is a need for stronger linguistic theories that tell in detail how texts communicate. The prevailing theories are very difficult to compare, and it is also very difficult to see how they might be combined into stronger theories. To make comparison and combination a bit more approachable, we have created a book which is designed to encourage comparison. A dozen different authors or teams, all experienced in discourse research, are given exactly the same text to analyze. The text is an appeal for money by a lobbying organization in Washington, DC. It informs, stimulates and manipulates the reader in a fascinating way. The joint analysis is far more insightful than any one team's analysis alone. This paper is our contribution to the book. Rhetorical Structure Theory (RST), the focus of this paper, is a way to account for the functional potential of text, its capacity to achieve the purposes of speakers and produce effects in hearers. It also shows a way to distinguish coherent texts from incoherent ones, and identifies consequences of text structure.

  6. Assortative sociality, limited dispersal, infectious disease and the genesis of the global pattern of religion diversity

    Science.gov (United States)

    Fincher, Corey L; Thornhill, Randy

    2008-01-01

    Why are religions far more numerous in the tropics compared with the temperate areas? We propose, as an answer, that more religions have emerged and are maintained in the tropics because, through localized coevolutionary races with hosts, infectious diseases select for three anticontagion behaviours: in-group assortative sociality; out-group avoidance; and limited dispersal. These behaviours, in turn, create intergroup boundaries that effectively fractionate, isolate and diversify an original culture leading to the genesis of two or more groups from one. Religion is one aspect of a group's culture that undergoes this process. If this argument is correct then, across the globe, religion diversity should correlate positively with infectious disease diversity, reflecting an evolutionary history of antagonistic coevolution between parasites and hosts and subsequent religion genesis. We present evidence that supports this model: for a global sample of traditional societies, societal range size is reduced in areas with more pathogens compared with areas with few pathogens, and in contemporary countries religion diversity is positively related to two measures of parasite stress. PMID:18664438

  7. International migration and educational assortative mating in Mexico and the United States.

    Science.gov (United States)

    Choi, Kate H; Mare, Robert D

    2012-05-01

    This paper examines the relationship between migration and marriage by describing how the distributions of marital statuses and assortative mating patterns vary by individual and community experiences of migration. In Mexico, migrants and those living in areas with high levels of out-migration are more likely to be in heterogamous unions. This is because migration increases the relative attractiveness of single return migrants while disproportionately reducing the number of marriageable men in local marriage markets. In the United States, the odds of homogamy are lower for migrants compared with nonmigrants; however, they do not vary depending on the volume of migration in communities. Migrants are more likely than nonmigrants to "marry up" educationally because the relatively small size of this group compels them to expand their pool of potential spouses to include nonmigrants, who tend to be better educated than they are. Among migrants, the odds of marrying outside of one's education group increase the most among the least educated. In Mexican communities with high rates of out-migration, the odds of marrying outside of one's education group are highest among those with the highest level of education. These findings suggest that migration disrupts preferences and opportunities for homogamy by changing social arrangements and normative climates.

  8. Assortative mating among animals of captive and wild origin following experimental conservation releases.

    Science.gov (United States)

    Slade, Brendan; Parrott, Marissa L; Paproth, Aleisha; Magrath, Michael J L; Gillespie, Graeme R; Jessop, Tim S

    2014-11-01

    Captive breeding is a high profile management tool used for conserving threatened species. However, the inevitable consequence of generations in captivity is broad scale and often-rapid phenotypic divergence between captive and wild individuals, through environmental differences and genetic processes. Although poorly understood, mate choice preference is one of the changes that may occur in captivity that could have important implications for the reintroduction success of captive-bred animals. We bred wild-caught house mice for three generations to examine mating patterns and reproductive outcomes when these animals were simultaneously released into multiple outdoor enclosures with wild conspecifics. At release, there were significant differences in phenotypic (e.g. body mass) and genetic measures (e.g. Gst and F) between captive-bred and wild adult mice. Furthermore, 83% of offspring produced post-release were of same source parentage, inferring pronounced assortative mating. Our findings suggest that captive breeding may affect mating preferences, with potentially adverse implications for the success of threatened species reintroduction programmes.

  9. PHYLLOXERA-RESISTANT HYBRID FORM OF GRAPES OF TECHNICAL SORTS FOR IMPROVING THE ASSORTMENT

    Directory of Open Access Journals (Sweden)

    Larkina M. D.

    2015-10-01

    Full Text Available Many old varieties of grapes do not meet modern requirements, so there is a need for improved assortment of new high-quality varieties. The translation of the vineyards of the black sea coast of the Krasnodar region on inoculated culture is not fully decided the fate of the viticulture of the area. Weak resistance of American rootstocks to increased content of calcium and salts in the soil, caused the weakening of the bushes, reducing the vigor of the shoots, their maturation and yield of grape plantations in some areas of the district while reducing their quality indicators. In this regard, the development of new high-yielding varieties suitable for own-rooted viticulture remains the most urgent task for breeders. The article shows the potential of many years of breeding work and study of grapes of technical varieties in Anapa Zone Station, tolerant to phylloxera and resistant to fungal diseases and frost, with high quality products and gives a brief description of some prominent grape varieties

  10. 分类觅食人工鱼群算法%Assorted foraging artificial fish swarm algorithm

    Institute of Scientific and Technical Information of China (English)

    李辉

    2016-01-01

    针对人工鱼群算法搜索速度和搜索精度不高,且对高维问题寻优能力较差等缺点,提出了一种改进的人工鱼群算法——分类觅食人工鱼群算法(Assorted Foraging Artificial Fish Swarm Algorithm-AFAFSA).该算法对执行觅食行为的个体分类进行更新,既保持种群的多样性又通过觅食行为加快算法的搜索速度,同时加入禁忌的思想帮助算法跳出局部最优,提高算法的性能.通过一系列的测试试验,发现改进算法在收敛速度和精度方面都有了明显的提高,对于高维问题有也具有较好的寻优能力.

  11. Size-assortative mating and sexual size dimorphism are predictable from simple mechanics of mate-grasping behavior

    Directory of Open Access Journals (Sweden)

    Jablonski Piotr G

    2010-11-01

    Full Text Available Abstract Background A major challenge in evolutionary biology is to understand the typically complex interactions between diverse counter-balancing factors of Darwinian selection for size assortative mating and sexual size dimorphism. It appears that rarely a simple mechanism could provide a major explanation of these phenomena. Mechanics of behaviors can predict animal morphology, such like adaptations to locomotion in animals from various of taxa, but its potential to predict size-assortative mating and its evolutionary consequences has been less explored. Mate-grasping by males, using specialized adaptive morphologies of their forelegs, midlegs or even antennae wrapped around female body at specific locations, is a general mating strategy of many animals, but the contribution of the mechanics of this wide-spread behavior to the evolution of mating behavior and sexual size dimorphism has been largely ignored. Results Here, we explore the consequences of a simple, and previously ignored, fact that in a grasping posture the position of the male's grasping appendages relative to the female's body is often a function of body size difference between the sexes. Using an approach taken from robot mechanics we model coercive grasping of females by water strider Gerris gracilicornis males during mating initiation struggles. We determine that the male optimal size (relative to the female size, which gives the males the highest grasping force, properly predicts the experimentally measured highest mating success. Through field sampling and simulation modeling of a natural population we determine that the simple mechanical model, which ignores most of the other hypothetical counter-balancing selection pressures on body size, is sufficient to account for size-assortative mating pattern as well as species-specific sexual dimorphism in body size of G. gracilicornis. Conclusion The results indicate how a simple and previously overlooked physical mechanism

  12. Correlation of CAG repeat length between the maternal and paternal allele of the Huntingtin gene: evidence for assortative mating

    Directory of Open Access Journals (Sweden)

    Wassink Tom

    2011-10-01

    Full Text Available Abstract Triplet repeats contribute to normal variation in behavioral traits and when expanded, cause brain disorders. While Huntington's Disease is known to be caused by a CAG triplet repeat in the gene Huntingtin, the effect of CAG repeats on brain function below disease threshold has not been studied. The current study shows a significant correlation between the CAG repeat length of the maternal and paternal allele in the Huntingtin gene among healthy subjects, suggesting assortative mating.

  13. APPLICATIONS OF SURFACE SPLINEFUNCTIONS TO STRUCTURAL ANALYSIS IN COAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    HanJinyan; YuZhiwei

    1996-01-01

    A surface spline function is used to fit a coal seam surface in structural analysis in coal geology. From the surface spline function, the first and second partial derivatives can also be derived and used to structural analysis, especially for recognition of the concealed structures. The detection of structures related to faulting is emphasized.

  14. Temporal variation in size-assortative mating and male mate choice in a spider with amphisexual care

    Science.gov (United States)

    Moura, Rafael R.; Gonzaga, Marcelo O.

    2017-04-01

    Males should be more selective when they have a high investment in reproduction, especially in species with biparental or paternal care. In this context, male mate choice can promote size-assortative mating (SAM) when (1) large males win intrasexual disputes, (2) large females are more fecund, and (3) males prefer larger females to smaller ones. In the spider Manogea porracea, males exhibit high reproductive investment by building their webs above those of females and exhibiting extended care of offspring in the absence of females. Under these circumstances, we expect the occurrence of SAM and male preference for large females. Herein, we performed observations and experiments in the field to evaluate the hypotheses that (1) M. porracea mates assortatively by size and (2) SAM is influenced by male mate choice. Furthermore, we measured variables that could affect mating patterns, the sex ratios, and densities of both sexes. Pairing in M. porracea was positively size-assortative in 2012, but not in 2013. Large males won most disputes for mates and preferred larger females, which produced more eggs. The inconsistency in detection of SAM was due to population dynamics, namely variations in sex ratio and population density across the breeding season. Furthermore, we found that the significance of male mate choice on sexual selection of body size in M. porracea strongly depends on the competition intensity for mating opportunities. The traditional sexual selection hypothesis of SAM needs to be reviewed and must include measures of competition intensity.

  15. Assortativity and the Probability of Epidemic Extinction: A Case Study of Pandemic Influenza A (H1N1-2009

    Directory of Open Access Journals (Sweden)

    Hiroshi Nishiura

    2011-01-01

    Full Text Available Unlike local transmission of pandemic influenza A (H1N1-2009, which was frequently driven by school children, most cases identified in long-distance intranational and international travelers have been adults. The present study examines the relationship between the probability of temporary extinction and the age-dependent next-generation matrix, focusing on the impact of assortativity. Preferred mixing captures as a good approximation the assortativity of a heterogeneously mixing population. We show that the contribution of a nonmaintenance host (i.e., a host type which cannot sustain transmission on its own to the risk of a major epidemic is greatly diminished as mixing patterns become more assortative, and in such a scenario, a higher proportion of non-maintenance hosts among index cases elevates the probability of extinction. Despite the presence of various other epidemiological factors that undoubtedly influenced the delay between first importations and the subsequent epidemic, these results suggest that the dominance of adults among imported cases represents one of the possible factors explaining the delays in geographic spread observed during the recent pandemic.

  16. Structured analysis and modeling of complex systems

    Science.gov (United States)

    Strome, David R.; Dalrymple, Mathieu A.

    1992-01-01

    The Aircrew Evaluation Sustained Operations Performance (AESOP) facility at Brooks AFB, Texas, combines the realism of an operational environment with the control of a research laboratory. In recent studies we collected extensive data from the Airborne Warning and Control Systems (AWACS) Weapons Directors subjected to high and low workload Defensive Counter Air Scenarios. A critical and complex task in this environment involves committing a friendly fighter against a hostile fighter. Structured Analysis and Design techniques and computer modeling systems were applied to this task as tools for analyzing subject performance and workload. This technology is being transferred to the Man-Systems Division of NASA Johnson Space Center for application to complex mission related tasks, such as manipulating the Shuttle grappler arm.

  17. Purification and Structural Analysis of Desmoplakin.

    Science.gov (United States)

    Choi, Hee-Jung; Weis, William I

    2016-01-01

    Desmoplakin (DP) is an obligate component of desmosomes, where it links the desmosomal cadherin/plakoglobin/plakophilin assembly to intermediate filaments. DP contains a large amino-terminal domain (DPNT) that binds to the cadherin/plakoglobin/plakophilin complex, a central coiled-coil domain that dimerizes the molecule, and a C-terminal domain (DPCT) that binds to intermediate filaments. DPNT contains a plakin domain, comprising a set of spectrin-like repeats. DPCT contains three plakin repeat domains, each formed by 4.5 repeats of a sequence motif known as a plakin repeat that bind to intermediate filaments. Here, we review purification, biochemical characterization, and structural analysis of the DPNT plakin domain and the DPCT plakin repeat domains.

  18. A DECOMPOSITION METHOD OF STRUCTURAL DECOMPOSITION ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    LI Jinghua

    2005-01-01

    Over the past two decades,structural decomposition analysis(SDA)has developed into a major analytical tool in the field of input-output(IO)techniques,but the method was found to suffer from one or more of the following problems.The decomposition forms,which are used to measure the contribution of a specific determinant,are not unique due to the existence of a multitude of equivalent forms,irrational due to the weights of different determinants not matching,inexact due to the existence of large interaction terms.In this paper,a decomposition method is derived to overcome these deficiencies,and we prove that the result of this approach is equal to the Shapley value in cooperative games,and so some properties of the method are obtained.Beyond that,the two approaches that have been used predominantly in the literature have been proved to be the approximate solutions of the method.

  19. Decision variables analysis for structured modeling

    Institute of Scientific and Technical Information of China (English)

    潘启树; 赫东波; 张洁; 胡运权

    2002-01-01

    Structured modeling is the most commonly used modeling method, but it is not quite addaptive to significant changes in environmental conditions. Therefore, Decision Variables Analysis(DVA), a new modelling method is proposed to deal with linear programming modeling and changing environments. In variant linear programming , the most complicated relationships are those among decision variables. DVA classifies the decision variables into different levels using different index sets, and divides a model into different elements so that any change can only have its effect on part of the whole model. DVA takes into consideration the complicated relationships among decision variables at different levels, and can therefore sucessfully solve any modeling problem in dramatically changing environments.

  20. Inelastic analysis of solids and structures

    CERN Document Server

    Kojic, M; Bathe, K J; Koji?, Milo

    2005-01-01

    Inelastic Analysis of Solids and Structures presents in a unified manner the physical and theoretical background of inelastic material models and computational methods, and illustrates the behavior of the models in typical engineering conditions.It is based on experimental observations and principles of mechanics, thus describing computational algorithms for stress calculation and presenting solved examples.The theoretical background is given to an extent necessary to describe the commonly employed material models in metal isotropic and orthotropic plasticity, thermoplasticity and viscoplasticity, and the plasticity of geological materials.The computational algorithms are developed in a unified manner with some detailed derivations of the algorithmic relations.The solved examples are designed to give insight into the material behavior in various engineering conditions, and to demonstrate the application of the computational algorithms.

  1. Isogeometric analysis in electronic structure calculations

    CERN Document Server

    Cimrman, Robert; Kolman, Radek; Tůma, Miroslav; Vackář, Jiří

    2016-01-01

    In electronic structure calculations, various material properties can be obtained by means of computing the total energy of a system as well as derivatives of the total energy w.r.t. atomic positions. The derivatives, also known as Hellman-Feynman forces, require, because of practical computational reasons, the discretized charge density and wave functions having continuous second derivatives in the whole solution domain. We describe an application of isogeometric analysis (IGA), a spline modification of finite element method (FEM), to achieve the required continuity. The novelty of our approach is in employing the technique of B\\'ezier extraction to add the IGA capabilities to our FEM based code for ab-initio calculations of electronic states of non-periodic systems within the density-functional framework, built upon the open source finite element package SfePy. We compare FEM and IGA in benchmark problems and several numerical results are presented.

  2. Structural analysis of nucleosomal barrier to transcription.

    Science.gov (United States)

    Gaykalova, Daria A; Kulaeva, Olga I; Volokh, Olesya; Shaytan, Alexey K; Hsieh, Fu-Kai; Kirpichnikov, Mikhail P; Sokolova, Olga S; Studitsky, Vasily M

    2015-10-27

    Thousands of human and Drosophila genes are regulated at the level of transcript elongation and nucleosomes are likely targets for this regulation. However, the molecular mechanisms of formation of the nucleosomal barrier to transcribing RNA polymerase II (Pol II) and nucleosome survival during/after transcription remain unknown. Here we show that both DNA-histone interactions and Pol II backtracking contribute to formation of the barrier and that nucleosome survival during transcription likely occurs through allosterically stabilized histone-histone interactions. Structural analysis indicates that after Pol II encounters the barrier, the enzyme backtracks and nucleosomal DNA recoils on the octamer, locking Pol II in the arrested state. DNA is displaced from one of the H2A/H2B dimers that remains associated with the octamer. The data reveal the importance of intranucleosomal DNA-protein and protein-protein interactions during conformational changes in the nucleosome structure on transcription. Mechanisms of nucleosomal barrier formation and nucleosome survival during transcription are proposed.

  3. Steerable wavelet analysis of CMB structures alignment

    CERN Document Server

    Vielva, P; Martínez-González, E; Vandergheynst, P

    2006-01-01

    This paper reviews the application of a novel methodology for analysing the isotropy of the universe by probing the alignment of local structures in the CMB. The strength of the proposed methodology relies on the steerable wavelet filtering of the CMB signal. One the one hand, the filter steerability renders the computation of the local orientation of the CMB features affordable in terms of computation time. On the other hand, the scale-space nature of the wavelet filtering allows to explore the alignment of the local structures at different scales, probing possible different phenomena. We present the WMAP first-year data analysis recently performed by the same authors (Wiaux et al.), where an extremely significant anisotropy was found. In particular, a preferred plane was detected, having a normal direction with a northern end position close to the northern end of the CMB dipole axis. In addition, a most preferred direction was found in that plane, with a northern end direction very close to the north eclipt...

  4. Strong assortative mating by diet, color, size, and morphology but limited progress toward sympatric speciation in a classic example: Cameroon crater lake cichlids.

    Science.gov (United States)

    Martin, Christopher H

    2013-07-01

    Models predict that sympatric speciation depends on restrictive parameter ranges, such as sufficiently strong disruptive selection and assortative mating, but compelling examples in nature have rarely been used to test these predictions. I measured the strength of assortative mating within a species complex of Tilapia in Lake Ejagham, Cameroon, a celebrated example of incipient sympatric adaptive radiation. This species complex is in the earliest stages of speciation: morphological and ecological divergence are incomplete, species differ primarily in breeding coloration, and introgression is common. I captured 27 mated pairs in situ and measured the diet, color, size, and morphology of each individual. I found strong assortative mating by color, size, head depth, and dietary source of benthic or pelagic prey along two independent dimensions of assortment. Thus, Ejagham Tilapia showed strong assortative mating most conducive to sympatric speciation. Nonetheless, in contrast to a morphologically bimodal Sarotherodon cichlid species pair in the lake, Ejagham Tilapia show more limited progress toward speciation, likely due to insufficient strength of disruptive selection on morphology estimated in a previous study (γ = 0.16). This supports the predicted dependence of sympatric speciation on strong assortment and strong disruptive selection by examining a potentially stalled example in nature.

  5. Evidence for differential assortative female preference in association with refugial isolation of rainbow skinks in Australia's tropical rainforests.

    Directory of Open Access Journals (Sweden)

    Gaynor Dolman

    Full Text Available BACKGROUND: Divergence driven by female preference can give rise to pre-mating isolation more rapidly than post-mating isolation can evolve through the accumulation of allelic incompatibilities. Moreover pre-mating isolation may be more effective at maintaining morphological differentiation between divergent populations. In the context of Australian rainforest endemic skinks that were historically subjected to refugial isolation, this study examined the following predictions: 1 that assortative female preference is associated with more recent divergence of southern C. rubrigularis (S-RED and C. rhomboidalis (BLUE, but not with deeply divergent S-RED and northern C. rubrigularis (N-RED; and 2 that upon secondary contact, morphological differentiation is maintained between S-RED and BLUE, whereas N-RED and S-RED remain morphogically indistinguishable. PRINCIPAL FINDINGS: Female preference trials found no evidence for assortative female preference between N-RED and S-RED, supporting a previous genetic hybrid zone study which inferred post-mating but no pre-mating isolation. In contrast there is evidence for assortative female preference between S-RED and BLUE, with BLUE females preferring to associate with BLUE males, but S-RED females showing no preference. Multi-locus coalescent analyses, used to estimate post-divergence gene-flow between proximally located S-RED and BLUE populations, rejected zero gene-flow from BLUE to S-RED and thus RED and BLUE have maintained morphological differentiation despite secondary contact. Morphometric analyses confirmed a lack of morphological divergence between N-RED and S-RED and established that BLUE is morphologically divergent from RED in traits other than throat colour. CONCLUSIONS/SIGNIFICANCE: Long-term isolation has been sufficient to generate post-mating isolation but no morphological divergence between N-RED and S-RED. In contrast, greater morphological differentiation is associated with evidence for

  6. Multi-locus assortment (MLA for transgene dispersal and elimination in mosquito populations.

    Directory of Open Access Journals (Sweden)

    Jason L Rasgon

    Full Text Available BACKGROUND: Replacement of wild-type mosquito populations with genetically modified versions is being explored as a potential strategy to control vector-borne diseases. Due to lower expected relative fitness of transgenic individuals, transgenes must be driven into populations for these scenarios to be successful. Several gene drive mechanisms exist in a theoretical sense but none are currently workable in mosquitoes. Even if strategies were workable, it would be very difficult to recall released transgenes in the event of unforeseen consequences. What is needed is a way to test transgenes in the field for feasibility, efficacy and safety prior to releasing an active drive mechanism. METHODOLOGY/PRINCIPAL FINDINGS: We outline a method, termed Multi-locus assortment (MLA, to spread transgenes into vector populations by the release of genetically-modified mosquitoes carrying multiple stable transgene inserts. Simulations indicate that [1] insects do not have to carry transgenes at more than 4 loci, [2] transgenes can be maintained at high levels by sequential small releases, the frequency of which depends on the construct fitness cost, and [3] in the case of unforeseen negative non-target effects, transgenes can be eliminated from the population by halting transgenic releases and/or mass releases of wild-type insects. We also discuss potential methods to create MLA mosquito strains in the laboratory. CONCLUSIONS/SIGNIFICANCE: While not as efficient as active drive mechanisms, MLA has other advantages: [1] MLA strains can be constructed for some mosquito species with currently-available technology, [2] MLA will allow the ecological components of transgenic mosquito releases to be tested before actual gene drive mechanisms are ready to be deployed, [3] since MLA is not self-propagating, the risk of an accidental premature release into nature is minimized, and [4] in the case that active gene drive mechanisms prove impossible to develop, the MLA

  7. Empirical analysis between industrial structure and economic growth of china

    Institute of Scientific and Technical Information of China (English)

    姚西龙; 尤津; 郝鹏飞

    2008-01-01

    In recent years,the relationship between the industrial structure and economic growth is more and more concerned by scholars. According to the theory of industrial structure and economic development, this article use regression analysis method that estimates the three major industries’ contribute to Chinese economic growth and use cluster analysis methods, then discuss how to optimize the indus-trial structure.

  8. Analysis of latent structures in linear systems

    DEFF Research Database (Denmark)

    Høskuldsson, Agnar

    2004-01-01

    In chemometrics the emphasis is on latent structure models. The latent structure is the part of the data that the modeling task is based upon. This paper is addressing some fundamental issues, when latent structures are used. The paper consists of three parts. The first part is concerned defining...

  9. Structural Response Analysis under Dependent Variables Based on Probability Boxes

    National Research Council Canada - National Science Library

    Xiao, Z; Yang, G

    2015-01-01

      This paper considers structural response analysis when structural uncertainty parameters distribution cannot be specified precisely due to lack of information and there are complex dependencies in the variables...

  10. Development of numerical procedures for analysis of complex structures

    Science.gov (United States)

    Gupta, K. K.

    1984-01-01

    The paper is concerned with the development of novel numerical procedures for the solution of static, stability, free vibration and dynamic response analysis of large, complex practical structures. Thus, details of numerical algorithms evolved for dynamic analysis of usual non-rotating and also rotating structures as well as finite dynamic elements are presented in the paper. Furthermore, the article provides some description of a general-purpose computer program STARS specifically developed for efficient analysis of complex practical structures.

  11. Open-nucleus breeding strategies compared with population-wide positive assortative mating: I. Equal distribution of testing efforts.

    Science.gov (United States)

    Lstibůrek, M; Mullin, T J; Lindgren, D; Rosvall, O

    2004-10-01

    Positive assortative mating (PAM) can enhance the additive genetic variance in a breeding population(BP). This increases the potential for gains in the production population (PP, selected subset of the BP) for recurrent selection programs in forest trees. The assortment of mates can be either: (1) by individual tree rank across the whole BP (PAM), or (2) trees of similar rank can be merged into larger hierarchical groups and then mated randomly within group ("open"-nucleus breeding,NB). The objective of this study was to compare PAM and NB in quantitative terms. The NB simulation model assumed two tiers (nucleus, main) with unrestricted migration between the tiers. Clonal tests were used to predict breeding values and test resources per mate were kept constant for all mates. Both gain and diversity were combined into a single selection criterion, "group-merit selection." Alternatives were compared over five breeding cycles by considering genetic gain and diversity in a selected PP established in a seed orchard. The assortment of mates in both alternatives enhanced additive variance and increased the additive effect in the BP, leading to additional gain in the PP. Gains generated under PAM always exceeded gains under NB. Thus, the main message from this study is that PAM in both the short- and long-term results in more gain at any target level of diversity in the PP (the breeder's target) than is achieved by the NB alternative. The optimum size of the nucleus varies with the desired level of seed orchard diversity. At lower target diversity, smaller nucleus sizes are favorable, while larger sizes result in more gain when seed orchard diversity is considered more important.

  12. Allogamy-Autogamy Switch Enhance Assortative Mating in the Allotetraploid Centaurea seridis L. Coexisting with the Diploid Centaurea aspera L. and Triggers the Asymmetrical Formation of Triploid Hybrids

    Science.gov (United States)

    Ferriol, María; Garmendia, Alfonso; Gonzalez, Ana; Merle, Hugo

    2015-01-01

    Hybridization between tetraploids and their related diploids is generally unsuccessful in Centaurea, hence natural formation of triploid hybrids is rare. In contrast, the diploid Centaurea aspera and the allotetraploid C. seridis coexist in several contact zones where a high frequency of triploid hybrids is found. We analyzed the floral biology of the three taxa to identify reproductive isolation mechanisms that allow their coexistence. Flowering phenology was recorded, and controlled pollinations within and between the three taxa were performed in the field. Ploidy level and germination of progeny were also assessed. There was a 50% flowering overlap which indicated a phenological shift. Diploids were strictly allogamous and did not display mentor effects, while tetraploids were found to be highly autogamous. This breakdown of self-incompatibility by polyploids is first described in Centaurea. The asymmetrical formation of the hybrid was also found: all the triploid intact cypselae came from the diploid mothers pollinated by the pollen of tetraploids. Pollen and eggs from triploids were totally sterile, acting as a strong triploid block. These prezygotic isolation mechanisms ensured higher assortative mating in tetraploids than in diploids, improving their persistence in the contact zones. However these mechanisms can also be the cause of the low genetic diversity and high genetic structure observed in C. seridis. PMID:26469271

  13. Analysis of slender structures using mechanics of structure genome and open source codes

    Science.gov (United States)

    Liu, Xin

    Structural genome (SG) is the smallest mathematical building block that contains all constitutive information of a structure. SG is a bridge connecting the material microstructures and the macroscopic structural analysis, so mechanics of structure genome (MSG) is an approach that unifies micromechanics and structural mechanics. There are three types of SG: 1D SG, 2D SG and 3D SG depending on the heterogeneity of the original structure. Once the SG of a structure is identified, the effective properties for corresponding structures including beams, plates/shells, or 3D solids can be obtained by the homogenization analysis of the SG. These effective properties can be used for the macroscopic structural analysis. After macroscopic structural analysis, the global structural responses can be the input parameters to get the local displacements/stress/strain using dehomogenization analysis of the SG. The mechanics of structure genome is implemented in a general purpose composites software called SwiftComp(TM). Slender structures are widely used in various industries, such as civil, aerospace and structural engineering. Using MSG, a new structural analysis approach is used to study the slender structures. In order to let users easily get the access to the software using this approach, several open source codes have been modified and upgraded. Graphical user interface is built on Gmsh, and CalculiX is chosen as the structural solver. New beam elements have been added to CalculiX to make the better use of the capability of SwiftComp(TM). Both linear and quadratic beam elements for Euler-Bernoulli and Timoshenko beam models are derived. Several numerical models show that the results using MSG and its companion code SwiftComp(TM) agree well with the 3D finite element analysis. The MSG approach greatly simplified the modeling process while maintaining accuracy. Therefore, the MSG approach provides an alternative way to analyze structures, especially when the structures are

  14. Fourier Transform Infrared Spectroscopic Analysis of Protein Secondary Structures

    Institute of Scientific and Technical Information of China (English)

    Jilie KONG; Shaoning YU

    2007-01-01

    Infrared spectroscopy is one of the oldest and well established experimental techniques for the analysis of secondary structure of polypeptides and proteins. It is convenient, non-destructive, requires less sample preparation, and can be used under a wide variety of conditions. This review introduces the recent developments in Fourier transform infrared (FTIR) spectroscopy technique and its applications to protein structural studies. The experimental skills, data analysis, and correlations between the FTIR spectroscopic bands and protein secondary structure components are discussed. The applications of FTIR to the secondary structure analysis, conformational changes, structural dynamics and stability studies of proteins are also discussed.

  15. THE RAW MINERAL SALTS USE IN COSMETICS FORMULATIONS: ASSORTMENT, MINERAL RAW MATERIALS CHARACTERISTICS AND COSMETICS FORMULATION TECHNOLOGY

    OpenAIRE

    S. B. Evseeva; B. B. Sysuev

    2016-01-01

    The application of mineral raw materials (brine lakes, thermal springs, sea water, bischofite) in cosmetics is presented in this article. The assortment of cosmetics that contain mineral salts is presented. The technological characteristics of production of these cosmetic formulations, in particular the ability of mineral salts to influence the stability of formulation and the sensory properties of products are given. The main approaches of that formulation development are described.

  16. THE RAW MINERAL SALTS USE IN COSMETICS FORMULATIONS: ASSORTMENT, MINERAL RAW MATERIALS CHARACTERISTICS AND COSMETICS FORMULATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    S. B. Evseeva

    2016-01-01

    Full Text Available The application of mineral raw materials (brine lakes, thermal springs, sea water, bischofite in cosmetics is presented in this article. The assortment of cosmetics that contain mineral salts is presented. The technological characteristics of production of these cosmetic formulations, in particular the ability of mineral salts to influence the stability of formulation and the sensory properties of products are given. The main approaches of that formulation development are described.

  17. Exhaustive analysis of the modular structure of the spliceosomal assembly network: a petri net approach.

    Science.gov (United States)

    Bortfeldt, Ralf H; Schuster, Stefan; Koch, Ina

    2011-01-01

    Spliceosomes are macro-complexes involving hundreds of proteins with many functional interactions. Spliceosome assembly belongs to the key processes that enable splicing of mRNA and modulate alternative splicing. A detailed list of factors involved in spliceosomal reactions has been assorted over the past decade, but, their functional interplay is often unknown and most of the present biological models cover only parts of the complete assembly process. It is a challenging task to build a computational model that integrates dispersed knowledge and combines a multitude of reaction schemes proposed earlier. Because for most reactions involved in spliceosome assembly kinetic parameters are not available, we propose a discrete modeling using Petri nets, through which we are enabled to get insights into the system's behavior via computation of structural and dynamic properties. In this paper, we compile and examine reactions from experimental reports that contribute to a functional spliceosome. All these reactions form a network, which describes the inventory and conditions necessary to perform the splicing process. The analysis is mainly based on system invariants. Transition invariants (T-invariants) can be interpreted as signaling routes through the network. Due to the huge number of T-invariants that arise with increasing network size and complexity, maximal common transition sets (MCTS) and T-clusters were used for further analysis. Additionally, we introduce a false color map representation, which allows a quick survey of network modules and the visual detection of single reactions or reaction sequences, which participate in more than one signaling route. We designed a structured model of spliceosome assembly, which combines the demands on a platform that i) can display involved factors and concurrent processes, ii) offers the possibility to run computational methods for knowledge extraction, and iii) is successively extendable as new insights into spliceosome

  18. Optimal analysis of structures by concepts of symmetry and regularity

    CERN Document Server

    Kaveh, Ali

    2013-01-01

    Optimal analysis is defined as an analysis that creates and uses sparse, well-structured and well-conditioned matrices. The focus is on efficient methods for eigensolution of matrices involved in static, dynamic and stability analyses of symmetric and regular structures, or those general structures containing such components. Powerful tools are also developed for configuration processing, which is an important issue in the analysis and design of space structures and finite element models. Different mathematical concepts are combined to make the optimal analysis of structures feasible. Canonical forms from matrix algebra, product graphs from graph theory and symmetry groups from group theory are some of the concepts involved in the variety of efficient methods and algorithms presented. The algorithms elucidated in this book enable analysts to handle large-scale structural systems by lowering their computational cost, thus fulfilling the requirement for faster analysis and design of future complex systems. The ...

  19. Interval Analysis of the Finite Element Method for Stochastic Structures

    Institute of Scientific and Technical Information of China (English)

    刘长虹; 刘筱玲; 陈虬

    2004-01-01

    A random parameter can be transformed into an interval number in the structural analysis with the concept of the confidence interval. Hence, analyses of uncertain structural systems can be used in the traditional FEM software. In some cases, the amount of solutions in stochastic structures is nearly as many as that in the traditional structural problems. In addition, a new method to evaluate the failure probability of structures is presented for the needs of the modern engineering design.

  20. Crystal structure analysis of intermetallic compounds

    Science.gov (United States)

    Conner, R. A., Jr.; Downey, J. W.; Dwight, A. E.

    1968-01-01

    Study concerns crystal structures and lattice parameters for a number of new intermetallic compounds. Crystal structure data have been collected on equiatomic compounds, formed between an element of the Sc, Ti, V, or Cr group and an element of the Co or Ni group. The data, obtained by conventional methods, are presented in an easily usable tabular form.

  1. Spontaneous deletion of a 209-kilobase-pair fragment from the Escherichia coli genome occurs with acquisition of resistance to an assortment of infectious phages.

    Science.gov (United States)

    Tanji, Yasunori; Hattori, Kenji; Suzuki, Kohichi; Miyanaga, Kazuhiko

    2008-07-01

    To breed resistance to an assortment of infectious phages, continuous cultures of Escherichia coli JM109 grown in a chemostat were exposed to phage mixtures prepared from sewage influent. Four sequential chemostat-grown cultures were each infected with a different phage mixture. At the end of a chemostat run, one phage-resistant colony was isolated and used to inoculate the subsequent culture. This process was repeated, and increased phage resistance of the input bacterial strain resulted from the successive challenges with different phage cocktails. Multiple mutations apparently accumulated progressively. A mutant isolated at the end of the four runs, designated D198, showed resistance to 38 of 40 phages that infect the parent strain, JM109. D198 produced less outer membrane protein C (OmpC) than JM109. However, restoration of the OmpC protein by plasmid-mediated complementation did not completely restore the susceptibility of D198 to the 38 phages. Therefore, alterations beyond the level of OmpC protein production contribute to the phage resistance of D198. PCR-based genetic analysis revealed that D198 has a genome that is 209 kbp (about 200 genes) smaller than JM109. The deletion includes the chromosomal section from ompC to wbbL that encodes the rhamnosyl transferase involved in lipopolysaccharide biosynthesis. Strains D198 and JM109 were comparable in their growth characteristics and their abilities to express a recombinant protein.

  2. Liquefaction mathematical analysis for improvement structures stability

    Directory of Open Access Journals (Sweden)

    Azam Khodashenas Pelko

    2010-10-01

    Full Text Available The stability of any structure is possible if foundation is appropriately designed. The Bandar abbas is the largest and most important port of Iran, with high seismicity and occurring strong earthquakes in this territory, the soil mechanical properties of different parts of city have been selected as the subject of current research. The data relating to the design of foundation for improvement of structure at different layer of subsoil have been collected and, accordingly, soil mechanical properties have been evaluated. The results of laboratory experiments can be used for evaluation of geotechnical characteristics of urban area for development a region with high level of structural stability. Ultimately, a new method for calculation of liquefaction force is suggested. It is applicable for improving geotechnical and structure codes and also for reanalysis of structure stability of previously constructed buildings.

  3. Shielding structure analysis for LSDS facility

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Hong Yeop; Kim, Jeong Dong; Lee, Yong Deok; Kim, Ho Dong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The nuclear material (Pyro, Spent nuclear fuel) itself and the target material to generate neutrons is the LSDS system for isotopic fissile assay release of high intensity neutron and gamma rays. This research was performed to shield from various strong radiation. A shielding evaluation was carried out with a facilities model of LSDS system. The MCNPX 2.5 code was used and a shielding evaluation was performed for the shielding structure and location. The radiation dose based on the hole structure and location of the wall was evaluated. The shielding evaluation was performed to satisfy the safety standard for a normal person (1 μSv/h) and to use enough interior space. The MCNPX2.5 code was used and a dose evaluation was performed for the location of the shielding material, shielding structure, and hole structure. The evaluation result differs according to the shielding material location. The dose rate was small when the shielding material was positioned at the center. The dose evaluation result regarding the location of the shielding material was applied to the facility and the shielding thickness was determined (In 50 cm + Borax 5 cm + Out 45cm). In the existing hole structure, the radiation leak is higher than the standard. A hole structure model to prevent leakage of radiation was proposed. The general public dose limit was satisfied when using the concrete reinforcement and a zigzag structure. The shielding result will be of help to the facility shielding optimization.

  4. Field distribution analysis in deflecting structures

    Energy Technology Data Exchange (ETDEWEB)

    Paramonov, V.V. [Joint Inst. for Nuclear Research, Moscow (Russian Federation)

    2013-02-15

    Deflecting structures are used now manly for bunch rotation in emittance exchange concepts, bunch diagnostics and to increase the luminosity. The bunch rotation is a transformation of a particles distribution in the six dimensional phase space. Together with the expected transformations, deflecting structures introduce distortions due to particularities - aberrations - in the deflecting field distribution. The distributions of deflecting fields are considered with respect to non linear additions, which provide emittance deteriorations during a transformation. The deflecting field is treated as combination of hybrid waves HE{sub 1} and HM{sub 1}. The criteria for selection and formation of deflecting structures with minimized level of aberrations are formulated and applied to known structures. Results of the study are confirmed by comparison with results of numerical simulations.

  5. Solid Propellant Grain Structural Integrity Analysis

    Science.gov (United States)

    1973-01-01

    The structural properties of solid propellant rocket grains were studied to determine the propellant resistance to stresses. Grain geometry, thermal properties, mechanical properties, and failure modes are discussed along with design criteria and recommended practices.

  6. LACTOFERRIN: ANALYSIS OF THE STRUCTURE PROFILE

    Directory of Open Access Journals (Sweden)

    Lilia Anghel

    2014-12-01

    Full Text Available The multitude of physiological processes in which the binding of iron ions takes part makes its mechanism worth investigating. The multiple sequence alignment method was applied to investigate the structure similarities of five lactoferrin X-ray crystallographic structures and outline the differences and similarities between lactoferrin and serum transferrin. The results of this study provide useful insights into the mechanism of iron-binding of lactoferrin protein molecule.

  7. Tools for analysis of Dirac structures on banach spaces

    NARCIS (Netherlands)

    Iftime, Orest V.; Sandovici, Adrian; Golo, Goran

    2005-01-01

    Power-conserving and Dirac structures are known as an approach to mathematical modeling of physical engineering systems. In this paper connections between Dirac structures and well known tools from standard functional analysis are presented. The analysis can be seen as a possible starting framework

  8. Structural analysis and functional characteristics of greenhouses in ...

    African Journals Online (AJOL)

    USER

    2010-05-24

    May 24, 2010 ... This study was carried out to determine the structural analysis and functional characteristics of the greenhouses ..... Duncan test results for mean separation of calculated stretch ratios, ... and Organic Fertilizers and Possible Effects in the Greenhouses of ... Structural analysis of greenhouses: A case study in.

  9. Method of morphological analysis of enterprise management organizational structure

    OpenAIRE

    Heorhiadi, N.; Iwaszczuk, N.; Vilhutska, R.

    2013-01-01

    The essence of the method of morphological analysis of enterprise management organizational structure is described in the article. Setting levels of morphological decomposition and specification of sets of elements are necessary for morphological analysis. Based on empirical research identified factors that influence the formation and use of enterprises management organizational structures.

  10. Using Event Structure Analysis to Understand Planned Social Change

    Directory of Open Access Journals (Sweden)

    William Stevenson

    2003-06-01

    Full Text Available In this article, the authors explore the application of Event Structure Analysis in understanding the linkages between events in planned social change. An illustrative example from the Comprehensive Strategy for Serious, Violent and Chronic Juvenile Offenders is used to highlight the key features of Event Structure Analysis.

  11. Shear Effects in Shakedown Analysis of Offshore Structures

    Institute of Scientific and Technical Information of China (English)

    M.J.Fadaee; H.Saffari; R.Tabatabaei

    2008-01-01

    In this paper, a formulation for shakedown analysis of elastic-plastic offshore structures under cyclic wave loading is presented. In this formulation, a fast numerical solution method is used, suitable for the Finite Element Method (FEM) analysis of large offshore structures on which shear effects in addition to bending and axial effects are taken into account. The Morison equation is adopted for converting the velocity and acceleration terms into resultant forces and it is extended to consider arbitrary orientations of the structural members. The theoretical methods of the shakedown analysis are discussed in detail and the formulation is applied to an offshore structure to verify the concept employed and its analytical capabilities.

  12. FISH detection of ribosomal cistrons and assortment-distortion for X and B chromosomes in Dichroplus pratensis (Acrididae).

    Science.gov (United States)

    Bidau, C J; Rosato, M; Martí, D A

    2004-01-01

    Assortment-distortion with respect to the X and NOR activity of a rare mitotically stable B chromosome (B(N)), was examined in 16 males of Dichroplus pratensis (Acrididae: Melanoplinae) from Argentine populations. In 1B individuals, the X and B associate preferentially during prophase I reaching a maximum level of association at zygotene. Frequency of X/B association remains relatively high up to diplotene-diakinesis and decreases steeply towards metaphase I. The percent X/B association at each stage is positively influenced by association at the previous stage, and interindividual variability in X/B association decreases as the frequency of association increases. Both chromosomes tended to preferentially orientate toward the same pole at MI (mean ratio of 16 individuals, 1.50:1) which determined an excess of XB and 00 second spermatocytes over X0 and 0B ones (1.39:1). No significant differences occurred between the MI, AI and MII assortment ratios. Fluorescent in situ hybridisation (FISH) confirmed that the B chromosome carries ribosomal genes and helped to establish that, during spermiogenesis, both the B and the normal NOR-bearing chromosome (S8) are clustered near the centriole adjunct region of spermatids. However, FISH failed to reveal the existence of inactive ribosomal cistrons in the X chromosome, as previously suggested, thus providing no support to a simple origin of the B from the X.

  13. 基于HVI检验数据的配棉方法%Cotton assorting based on HVI data

    Institute of Scientific and Technical Information of China (English)

    石洋; 张得昆; 徐玫

    2011-01-01

    利用公检棉花的HVI数据对棉纺企业配棉方法进行指导,达到优棉优用、稳定质量、节约资源、降低成本的目的.通过分析公检棉花各项数据指标和棉纺企业配棉指标的关系,以公检棉花的HVI数据为基础,根据配棉原理建立配棉数学模型,把配棉数学模型转化为标准的线性方程组,利用计算机求解方程组,完成对配棉模型的求解.通过对配棉方案进行优化,使棉纺企业更加合理地利用棉花资源.%The relationship between the objective fair detection data and cotton assorting indicators is analyzed. Taking HVI data as the basis,the mathematical model of cotton assorting is set up,then it is changed to standard system of linear equations,finally,the system of linear equations is solved by computer. The optimized cotton as-soring plan provides a reasonable way for cotton bales management and processing.

  14. Structural analysis with the finite element method linear statics

    CERN Document Server

    Oñate, Eugenio

    2013-01-01

    STRUCTURAL ANALYSIS WITH THE FINITE ELEMENT METHOD Linear Statics Volume 1 : The Basis and Solids Eugenio Oñate The two volumes of this book cover most of the theoretical and computational aspects of the linear static analysis of structures with the Finite Element Method (FEM). The content of the book is based on the lecture notes of a basic course on Structural Analysis with the FEM taught by the author at the Technical University of Catalonia (UPC) in Barcelona, Spain for the last 30 years. Volume1 presents the basis of the FEM for structural analysis and a detailed description of the finite element formulation for axially loaded bars, plane elasticity problems, axisymmetric solids and general three dimensional solids. Each chapter describes the background theory for each structural model considered, details of the finite element formulation and guidelines for the application to structural engineering problems. The book includes a chapter on miscellaneous topics such as treatment of inclined supports, elas...

  15. Stochastic Fatigue Analysis of Jacket Type Offshore Structures

    DEFF Research Database (Denmark)

    Sigurdsson, Gudfinnur

    In this paper, a stochastic reliability assessment for jacket type offshore structures subjected to wave loads in deep water environments is outlined. In the reliability assessment, structural and loading uncertainties are taken into account by means of some stochastic variables. To estimate...... statistical measures of structural stress variations the modal spectral analysis method is applied....

  16. Revealing how network structure affects accuracy of link prediction

    Science.gov (United States)

    Yang, Jin-Xuan; Zhang, Xiao-Dong

    2017-08-01

    Link prediction plays an important role in network reconstruction and network evolution. The network structure affects the accuracy of link prediction, which is an interesting problem. In this paper we use common neighbors and the Gini coefficient to reveal the relation between them, which can provide a good reference for the choice of a suitable link prediction algorithm according to the network structure. Moreover, the statistical analysis reveals correlation between the common neighbors index, Gini coefficient index and other indices to describe the network structure, such as Laplacian eigenvalues, clustering coefficient, degree heterogeneity, and assortativity of network. Furthermore, a new method to predict missing links is proposed. The experimental results show that the proposed algorithm yields better prediction accuracy and robustness to the network structure than existing currently used methods for a variety of real-world networks.

  17. Probabilistic structural analysis algorithm development for computational efficiency

    Science.gov (United States)

    Wu, Y.-T.

    1991-01-01

    The PSAM (Probabilistic Structural Analysis Methods) program is developing a probabilistic structural risk assessment capability for the SSME components. An advanced probabilistic structural analysis software system, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress), is being developed as part of the PSAM effort to accurately simulate stochastic structures operating under severe random loading conditions. One of the challenges in developing the NESSUS system is the development of the probabilistic algorithms that provide both efficiency and accuracy. The main probability algorithms developed and implemented in the NESSUS system are efficient, but approximate in nature. In the last six years, the algorithms have improved very significantly.

  18. Unascertained Factor Method of Dynamic Characteristic Analysis for Antenna Structures

    Institute of Scientific and Technical Information of China (English)

    ZHU Zeng-qing; LIANG Zhen-tao; CHEN Jian-jun

    2008-01-01

    The dynamic characteristic analysis model of antenna structures is built, in which the structural physical parameters and geometrical dimensions are all considered as unascertained variables, And a structure dynamic characteristic analysis method based on the unascertained factor method is given. The computational expression of structural characteristic is developed by the mathematics expression of unascertained factor and the principles of unascertained rational numbers arithmetic. An example is given, in which the possible values and confidence degrees of the unascertained structure characteristics are obtained. The calculated results show that the method is feasible and effective.

  19. Meta-analysis a structural equation modeling approach

    CERN Document Server

    Cheung, Mike W-L

    2015-01-01

    Presents a novel approach to conducting meta-analysis using structural equation modeling. Structural equation modeling (SEM) and meta-analysis are two powerful statistical methods in the educational, social, behavioral, and medical sciences. They are often treated as two unrelated topics in the literature. This book presents a unified framework on analyzing meta-analytic data within the SEM framework, and illustrates how to conduct meta-analysis using the metaSEM package in the R statistical environment. Meta-Analysis: A Structural Equation Modeling Approach begins by introducing the impo

  20. Correct use of Membrane Elements in Structural Analysis

    Directory of Open Access Journals (Sweden)

    Rothman Timothy

    2016-01-01

    Full Text Available Structural analysis of consumer electronic devices such as phones and tablets involves Finite Element Analysis (FEA. Dynamic loading conditions such as device dropping and bending dictate accurate FEA models to reduce design risk in many areas. The solid elements typically used in structural analysis do not have integration points on the surface. The outer surface is of most interest because that is where the cracks start. Analysts employ a post processing trick through using membranes to bring accurate stress/strain results to the surface. This paper explains numerical issues with implementation of membranes and recommends a methodology for accurate structural analysis.

  1. Rapid Electromagnetic Analysis of Entire Accelerator Structures

    CERN Document Server

    Cooke, Simon

    2005-01-01

    We present results of a new method for fast, accurate calculation, in 3-D, of the electromagnetic mode spectrum of long, tapered accelerator structures. Instead of discretizing the entire structure directly and solving a huge matrix eigenvalue problem, we use a new two-step technique that scales much better to long, multi-cavity structures. In the first step we compute a small number of eigenmodes of individual cavities, achieving 0.05% frequency accuracy using a new second-order finite-element code. In the second step we use these 3-D mode solutions as field basis functions to obtain a reduced matrix representation of Maxwell's equations for the complete structure. Solving the reduced system takes just a few minutes on a desktop PC even with more than 100 non-identical cavities, and gives the complete mode spectrum in the first few bands of the structure. By judicious choice of the basis modes, we retain 0.05% frequency accuracy for these global solutions, and can reconstruct the complete 3-D field of each m...

  2. Cotton Assorting Optimized Model Based on HVI Data and Its Application%基于HVI数据的配棉优选模型及应用研究

    Institute of Scientific and Technical Information of China (English)

    邱兆宝

    2012-01-01

    研究基于HVI数据的配棉方案优选模型的创建方法及应用效果.以HVI数据为基础,配棉技术标准为依据,运用系统工程的思想和方法,遵循配棉原则,利用较少的定量信息使决策的思维过程数学化,从而为多目标、多准则的配棉问题提供比较简便的决策方法.模型的求解采用隐枚举法,有效地解决了非线性目标整数规划配棉问题.认为:配棉方案优选模型与配棉方案的评价方法,可作为棉纺质量工艺专家指导系统的组成部分.%Establish method and application effect of cotton assorting optimized model based on HVI data were researched. HVI data were taken as base, technology standard of cotton assorting were selected as foundation, ideas and method of system engineering was used. Principle of cotton assorting should be followed. Decision-making process of thinking could be mathematical by using less quantitative information, so decision method of cotton assorting problems with multi-objective and multi criteria can be provided. Implicit enumeration was used for model solve,cotton assorting problems of nonlinear objective integer programming can be solved effectively. It is considered that the cotton assorting optimization model and evaluation methods could be the part of cotton spinning processing expert guide system.

  3. Earthquake analysis of structures using nonlinear models

    OpenAIRE

    Cemalovic, Miran

    2015-01-01

    Throughout the governing design codes, several different methods are presented for the evaluation of seismic problems. This thesis assesses the non-linear static and dynamic procedures presented in EN 1998-1 through the structural response of a RC wall-frame building. The structure is designed in detail according to the guidelines for high ductility (DCH) in EN 1998-1. The applied procedures are meticulously evaluated and the requirements in EN 1998-1 are reviewed. In addition, the finite ele...

  4. Exact analysis of bi-periodic structures

    CERN Document Server

    Cai, C W; Chan, H C

    2002-01-01

    By using the U-transformation method, it is possible to uncouple linear simultaneous equations, either algebraic or differential, with cyclic periodicity. This book presents a procedure for applying the U-transformation technique twice to uncouple the two sets of unknown variables in a doubly periodic structure to achieve an analytical exact solution. Explicit exact solutions for the static and dynamic analyses for certain engineering structures with doubly periodic properties - such as a continuous truss with any number of spans, cable network and grillwork on supports with periodicity, and g

  5. ROLE OF UNDERGROUND STRUCTURE DEFORMATION VELOCITY IN THE ANALYSIS OF BLAST-RESISTANT STRUCTURES

    Institute of Scientific and Technical Information of China (English)

    赵晓兵; 方秦

    2002-01-01

    The structural deformation velocity plays a significant role in the dynamic calculation of underground blast-resistant structures. The motion differentiating equation of a structure system taking into account the role of deformation velocity of the structure will truthfully describe the actual situation of structural vibration. With the one-dimensional plane wave theory, the expression of load on the structural periphery is developed, and the generalized variation principle for the dynamic analysis of underground arched-bar structures is given. At the same time, the results of the numerical calculation are compared.

  6. VirusPKT: A Search Tool For Assimilating Assorted Acquaintance For Viruses

    Directory of Open Access Journals (Sweden)

    Jayanthi Manicassamy

    2009-11-01

    Full Text Available Viruses utilize various means to circumvent the immune detection in the biological systems. Several mathematical models have been investigated for the description of viral dynamics in the biological system of human and various other species. One common strategy for evasion and recognition of viruses is, through acquaintance in the systems by means of search engines. In this perspective a search tool have been developed to provide a wider comprehension about the structure and other details on viruses which have been narrated in this paper. This provides an adequate knowledge in evolution and building of viruses, its functions through information extraction from various websites. Apart from this, tool aim to automate the activities associated with it in a self-maintainable, self-sustainable, proactive one which has been evaluated through analysis made and have been discussed in this paper.

  7. VirusPKT: A Search Tool For Assimilating Assorted Acquaintance For Viruses

    CERN Document Server

    Manicassamy, Jayanthi

    2009-01-01

    Viruses utilize various means to circumvent the immune detection in the biological systems. Several mathematical models have been investigated for the description of viral dynamics in the biological system of human and various other species. One common strategy for evasion and recognition of viruses is, through acquaintance in the systems by means of search engines. In this perspective a search tool have been developed to provide a wider comprehension about the structure and other details on viruses which have been narrated in this paper. This provides an adequate knowledge in evolution and building of viruses, its functions through information extraction from various websites. Apart from this, tool aim to automate the activities associated with it in a self-maintainable, self-sustainable, proactive one which has been evaluated through analysis made and have been discussed in this paper.

  8. Assortive mating for personaltiy traits, educational level, religious affiliation, height, weight, adn body mass index in parents of Korean twin sample.

    Science.gov (United States)

    Hur, Yoon-Mi

    2003-12-01

    The degree of assortative mating for psychological and physical traits in Asian societies in relatively unknown. The present study examined assortative mating for educational level, personality traits, religious affiliation, height, weight, and body mass index in a korean sample. Age-adjusted spouse correlations were high for educational level (r = .63) and religious affiliation (r = .67), modest for most personality traits (rs = -.01 to .26), and trivial for height (r = .04), weight (r = .05)m and body mass index (r = .11). These results were remarkably similar to those found from the western samples. Implications of the present findings in behavior genetic studies and human mating patterns were briefly discussed.

  9. Structural Analysis Extended with Active Fault Isolation - Methods and Algorithms

    DEFF Research Database (Denmark)

    Gelso, Esteban R.; Blanke, Mogens

    2009-01-01

    on system inputs can considerably enhance fault isolability. This paper investigates this possibility of active fault isolation from a structural point of view. While such extension of the structural analysis approach was suggested earlier, algorithms and case studies were needed to explore this theory....... The paper develops algorithms for investigation of the possibilities of active structural isolation and it offers illustrative examples and a larger case study to explore the properties of active structural isolability ideas....

  10. Earthquake Analysis of Structure by Base Isolation Technique in SAP

    OpenAIRE

    T. Subramani; J. Jothi

    2014-01-01

    This paper presents an overview of the present state of base isolation techniques with special emphasis and a brief on other techniques developed world over for mitigating earthquake forces on the structures. The dynamic analysis procedure for isolated structures is briefly explained. The provisions of FEMA 450 for base isolated structures are highlighted. The effects of base isolation on structures located on soft soils and near active faults are given in brief. Simple case s...

  11. Total-System Approach To Design And Analysis Of Structures

    Science.gov (United States)

    Verderaime, V.

    1995-01-01

    Paper presents overview and study of, and comprehensive approach to, multidisciplinary engineering design and analysis of structures. Emphasizes issues related to design of semistatic structures in environments in which spacecraft launched, underlying concepts applicable to other structures within unique terrestrial, marine, or flight environments. Purpose of study to understand interactions among traditionally separate engineering design disciplines with view toward optimizing not only structure but also overall design process.

  12. RNA structural analysis by evolving SHAPE chemistry.

    Science.gov (United States)

    Spitale, Robert C; Flynn, Ryan A; Torre, Eduardo A; Kool, Eric T; Chang, Howard Y

    2014-01-01

    RNA is central to the flow of biological information. From transcription to splicing, RNA localization, translation, and decay, RNA is intimately involved in regulating every step of the gene expression program, and is thus essential for health and understanding disease. RNA has the unique ability to base-pair with itself and other nucleic acids to form complex structures. Hence the information content in RNA is not simply its linear sequence of bases, but is also encoded in complex folding of RNA molecules. A general chemical functionality that all RNAs have is a 2'-hydroxyl group in the ribose ring, and the reactivity of the 2'-hydroxyl in RNA is gated by local nucleotide flexibility. In other words, the 2'-hydroxyl is reactive at single-stranded and conformationally flexible positions but is unreactive at nucleotides constrained by base-pairing. Recent efforts have been focused on developing reagents that modify RNA as a function of RNA 2' hydroxyl group reactivity. Such RNA structure probing techniques can be read out by primer extension in experiments termed RNA SHAPE (selective 2'- hydroxyl acylation and primer extension). Herein, we describe the efforts devoted to the design and utilization of SHAPE probes for characterizing RNA structure. We also describe current technological advances that are being applied to utilize SHAPE chemistry with deep sequencing to probe many RNAs in parallel. The merging of chemistry with genomics is sure to open the door to genome-wide exploration of RNA structure and function.

  13. Failure Analysis of Composite Structure Materials.

    Science.gov (United States)

    1986-05-01

    8MATERIAL STRUCTURES DISCONTINUITY T•R PLY DROPOFF i 7ARC LAP/GAP . PRPAATION A, ,OM LY , 1e, ’ •INS ERVICE MAINTENANCE DAMAGE SVv , S IMPACT \\\\ CHESIE ...composite joints such as box beam members, for example, are difficult to inspect by ultrasonic techniques, and the X-ray attenuation coefficients of

  14. Spatial Analysis Of Human Capital Structures

    Directory of Open Access Journals (Sweden)

    Gajdos Artur

    2014-12-01

    Full Text Available The main purpose of this paper is to analyse the interdependence between labour productivity and the occupational structure of human capital in a spatial cross-section. Research indicates (see Fischer 2009 the possibility to assess the impact of the quality of human capital (measured by means of the level of education on labour productivity in a spatial cross-section.

  15. RNA Structural Analysis by Evolving SHAPE Chemistry

    Science.gov (United States)

    Spitale, Robert C.; Flynn, Ryan A.; Torre, Eduardo A.; Kool, Eric T.; Chang, Howard Y.

    2017-01-01

    RNA is central to the flow of biological information. From transcription to splicing, RNA localization, translation, and decay, RNA is intimately involved in regulating every step of the gene expression program, and is thus essential for health and understanding disease. RNA has the unique ability to base-pair with itself and other nucleic acids to form complex structures. Hence the information content in RNA is not simply its linear sequence of bases, but is also encoded in complex folding of RNA molecules. A general chemical functionality that all RNAs have is a 2’-hydroxyl group in the ribose ring, and the reactivity of the 2'-hydroxyl in RNA is gated by local nucleotide flexibility. In other words, the 2'-hydroxyl is reactive at single-stranded and conformationally flexible positions but is unreactive at nucleotides constrained by base pairing. Recent efforts have been focused on developing reagents that modify RNA as a function of RNA 2’ hydroxyl group flexibility. Such RNA structure probing techniques can be read out by primer extension in experiments termed RNA SHAPE (Selective 2’ Hydroxyl Acylation and Primer Extension). Herein we describe the efforts devoted to the design and utilization of SHAPE probes for characterizing RNA structure. We also describe current technological advances that are being used to utilize SHAPE chemistry with deep sequencing to probe many RNAs in parallel. The merger of chemistry with genomics is sure to open the door to genome-wide exploration of RNA structure and function. PMID:25132067

  16. Stochastic finite element analysis of steel structures

    NARCIS (Netherlands)

    Waarts, P.H.; Vrouwenvelder, A.C.W.M.

    1999-01-01

    The paper describes two well known but adapted methods for calculating the probability of failure of structures. First the First Order Reliability Method (FORM) is described using an adapted response surface. Secondly the Directional Sampling (DS) procedure is described using truncated stochastic di

  17. Structure function analysis of mammalian cryptochromes

    NARCIS (Netherlands)

    F. Tamanini (Filippo); I. Chaves (Ines); M.I. Bajek (Monika); G.T.J. van der Horst (Gijsbertus)

    2007-01-01

    textabstractMembers of the photolyase/cryptochrome family are flavoproteins that share an extraordinary conserved core structure (photolyase homology region, PHR), but the presence of a carboxy-terminal extension is limited to the cryptochromes. Photolyases are DNA-repair enzymes that remove

  18. Reliability Analysis of an Offshore Structure

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle; Rackwitz, R.

    1992-01-01

    A jacket type offshore structure from the North Sea is considered. The time variant reliability is estimated for failure defined as brittie fradure and crack through the tubular roerober walls. The stochastic modeiling is described. The hot spot stress speetral moments as fundion of the stochastic...

  19. Structural Analysis of a Dragonfly Wing

    NARCIS (Netherlands)

    Jongerius, S.R.; Lentink, D.

    2010-01-01

    Dragonfly wings are highly corrugated, which increases the stiffness and strength of the wing significantly, and results in a lightweight structure with good aerodynamic performance. How insect wings carry aerodynamic and inertial loads, and how the resonant frequency of the flapping wings is tuned

  20. Design and analysis of composite structures with applications to aerospace structures

    CERN Document Server

    Kassapoglou, Christos

    2010-01-01

    Design and Analysis of Composite Structures enables graduate students and engineers to generate meaningful and robust designs of complex composite structures. Combining analysis and design methods for structural components, the book begins with simple topics such as skins and stiffeners and progresses through to entire components of fuselages and wings. Starting with basic mathematical derivation followed by simplifications used in real-world design, Design and Analysis of Composite Structures presents the level of accuracy and range of applicability of each method. Examples taken from ac

  1. Structural Analysis Using NX Nastran 9.0

    Science.gov (United States)

    Rolewicz, Benjamin M.

    2014-01-01

    NX Nastran is a powerful Finite Element Analysis (FEA) software package used to solve linear and non-linear models for structural and thermal systems. The software, which consists of both a solver and user interface, breaks down analysis into four files, each of which are important to the end results of the analysis. The software offers capabilities for a variety of types of analysis, and also contains a respectable modeling program. Over the course of ten weeks, I was trained to effectively implement NX Nastran into structural analysis and refinement for parts of two missions at NASA's Kennedy Space Center, the Restore mission and the Orion mission.

  2. Seeking Development in the Succession-An Analysis of Saussure's Structuralism and Strauss' Cultural Structuralism

    Institute of Scientific and Technical Information of China (English)

    杨绍芳

    2009-01-01

    With an analysis of Saussure's linguistic structuralism and Strauss' cultural structuralism and exploration of their great impact on linguistic and cultural theory respectively, the author of this paper can safely draw the conclusion that "Saussure's perspective was to provide an intellectual seed that was to flower in later decades as structuralism became a general approach to the study of culture". Saussure, together

  3. Isogeometric analysis for thin-walled composite structures

    NARCIS (Netherlands)

    Guo, Y.

    2016-01-01

    The conceptual ideas behind isogeometric analysis (IGA) are aimed at unifying computer aided design (CAD) and finite element analysis (FEA). Isogeometric analysis employs the non-uniform rational B-spline functions (NURBS) used for the geometric description of a structure to approximate its physical

  4. Impact factors of fractal analysis of porous structure

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Characterization of pore structure is one of the key problems for fabrication and application research on porous materials. But, complexity of pore structure makes it difficult to characterize pore structure by Euclidean geometry and traditional experimental methods. Fractal theory has been proved effective to characterize the complex pore structure. The box dimension method based on fractal theory was applied to characterizing the pore structure of fiber porous materials by analyzing the electronic scanning microscope (SEM) images of the porous materials in this paper. The influences of image resolution, threshold value, and image magnification on fractal analysis were investigated. The results indicate that such factors greatly affect fractal analysis process and results. The appropriate magnification threshold and fractal analysis are necessary for fractal analysis.

  5. Large-scale structural analysis: The structural analyst, the CSM Testbed and the NAS System

    Science.gov (United States)

    Knight, Norman F., Jr.; Mccleary, Susan L.; Macy, Steven C.; Aminpour, Mohammad A.

    1989-01-01

    The Computational Structural Mechanics (CSM) activity is developing advanced structural analysis and computational methods that exploit high-performance computers. Methods are developed in the framework of the CSM testbed software system and applied to representative complex structural analysis problems from the aerospace industry. An overview of the CSM testbed methods development environment is presented and some numerical methods developed on a CRAY-2 are described. Selected application studies performed on the NAS CRAY-2 are also summarized.

  6. In Depth Analysis of Food Structures

    DEFF Research Database (Denmark)

    Nielsen, Otto Højager Attermann; Dahl, Anders Lindbjerg; Larsen, Rasmus

    2011-01-01

    In this paper we describe a computer vision system based on SLS (Subsurface Laser Scattering) for industrial food inspection. To ob- tain high and uniform quality, in for example dairy products like yoghurt and cheese, it is important to monitor the change in size and shape of microscopic particles...... over time. In this paper we demonstrate the use- fulness of our SLS system for characterizing food items. We use a laser source that can be tuned to any wavelength in the range of 455 nm - 1020 nm by applying an AOTF (Acousto-Optical Tunable Filter) to an optical beam generated by a Super......K (supercontinuum) laser system. In our experiments we show how the system can be used for discriminating dairy products with dierent structure and how the structural change of a foam can be monitored over time. Time stability of the system is essential for measurements over several hours, and we demonstrate...

  7. Truncated Moment Analysis of Nucleon Structure Functions

    Energy Technology Data Exchange (ETDEWEB)

    A. Psaker; W. Melnitchouk; M. E. Christy; C. E. Keppel

    2007-11-16

    We employ a novel new approach using "truncated" moments, or integrals of structure functions over restricted regions of x, to study local quark-hadron duality, and the degree to which individual resonance regions are dominated by leading twists. Because truncated moments obey the same Q^2 evolution equations as the leading twist parton distributions, this approach makes possible for the first time a description of resonance region data and the phenomenon of quark-hadron duality directly from QCD.

  8. Analysis and Synthesis of Robust Data Structures

    Science.gov (United States)

    1990-08-01

    1.3.2 Multiversion Software. .. .. .. .. .. .... .. ... .. ...... 5 1.3.3 Robust Data Structure .. .. .. .. .. .. .. .. .. ... .. ..... 6 1.4...context are 0 multiversion software, which is an adaptation oi N-modulo redundancy (NMR) tech- nique. * recovery blocks, which is an adaptation of...implementations using these features for such a hybrid approach. 1.3.2 Multiversion Software Avizienis [AC77] was the first to adapt NMR technique into

  9. Finite Element Analysis of Eutectic Structures

    Science.gov (United States)

    2014-03-12

    by solid state sintering . The microstructure can exhibit many geometrical forms: dendritic, lamellar, and rods. The self-assembled structure can be...Thermal data was measured in the temperature range of 373 to 1273 K by the laser flash method (Anter Flashline 5000, Anter Corporation, Pittsburgh, PA...therefore is not believed to alter thermal measurements significantly. Specimens were also coated with carbon 4 paint in accordance with standard flash

  10. Structural Analysis of a Dragonfly Wing

    OpenAIRE

    Jongerius, S.R.; Lentink, D.

    2010-01-01

    Dragonfly wings are highly corrugated, which increases the stiffness and strength of the wing significantly, and results in a lightweight structure with good aerodynamic performance. How insect wings carry aerodynamic and inertial loads, and how the resonant frequency of the flapping wings is tuned for carrying these loads, is however not fully understood. To study this we made a three-dimensional scan of a dragonfly (Sympetrum vulgatum) fore- and hindwing with a micro-CT scanner. The scans c...

  11. Numerical Limit Analysis of Precast Concrete Structures

    DEFF Research Database (Denmark)

    Herfelt, Morten Andersen; Poulsen, Peter Noe; Hoang, Linh Cao

    2016-01-01

    optimisation as well as material optimisation is given and a four-storey shear wall is analysed using load optimisation. The analysis yields a capacity more than three times larger than the design load for the critical load case, and the collapse mode and stress distribution are analysed. Finally, numerical...

  12. Modal analysis of kagome-lattice structures

    Science.gov (United States)

    Perez, H.; Blakley, S.; Zheltikov, A. M.

    2015-05-01

    The first few lowest order circularly symmetric electromagnetic eigenmodes of a full kagome lattice are compared to those of a kagome lattice with a hexagonal defect. This analysis offers important insights into the physics behind the waveguiding properties of hollow-core fibers with a kagome-lattice cladding.

  13. Protein structure similarity from principle component correlation analysis

    Directory of Open Access Journals (Sweden)

    Chou James

    2006-01-01

    Full Text Available Abstract Background Owing to rapid expansion of protein structure databases in recent years, methods of structure comparison are becoming increasingly effective and important in revealing novel information on functional properties of proteins and their roles in the grand scheme of evolutionary biology. Currently, the structural similarity between two proteins is measured by the root-mean-square-deviation (RMSD in their best-superimposed atomic coordinates. RMSD is the golden rule of measuring structural similarity when the structures are nearly identical; it, however, fails to detect the higher order topological similarities in proteins evolved into different shapes. We propose new algorithms for extracting geometrical invariants of proteins that can be effectively used to identify homologous protein structures or topologies in order to quantify both close and remote structural similarities. Results We measure structural similarity between proteins by correlating the principle components of their secondary structure interaction matrix. In our approach, the Principle Component Correlation (PCC analysis, a symmetric interaction matrix for a protein structure is constructed with relationship parameters between secondary elements that can take the form of distance, orientation, or other relevant structural invariants. When using a distance-based construction in the presence or absence of encoded N to C terminal sense, there are strong correlations between the principle components of interaction matrices of structurally or topologically similar proteins. Conclusion The PCC method is extensively tested for protein structures that belong to the same topological class but are significantly different by RMSD measure. The PCC analysis can also differentiate proteins having similar shapes but different topological arrangements. Additionally, we demonstrate that when using two independently defined interaction matrices, comparison of their maximum

  14. Global Analysis and Structural Performance of the Tubed Mega Frame

    OpenAIRE

    Zhang, Han

    2014-01-01

    The Tubed Mega Frame is a new structure concept for high-rise buildings which is developed by Tyréns. In order to study the structural performance as well as the efficiency of this new concept, a global analysis of the Tubed Mega Frame structure is performed using finite element analysis software ETABS. Besides, the lateral loads that should be applied on the structure according to different codes are also studied. From the design code study for wind loads and seismic design response spectrum...

  15. Nonlinear dynamic analysis of quasi-symmetric anisotropic structures

    Science.gov (United States)

    Noor, Ahmed K.; Peters, Jeanne M.

    1987-01-01

    An efficient computational method for the nonlinear dynamic analysis of quasi-symmetric anisotropic structures is proposed. The application of mixed models simplifies the analytical development and improves the accuracy of the response predictions, and operator splitting allows the reduction of the analysis model of the quasi-symmetric structure to that of the corresponding symmetric structure. The preconditoned conjugate gradient provides a stable and effective technique for generating the unsymmetric response of the structure as the sum of a symmetrized response plus correction modes. The effectiveness of the strategy is demonstrated with the example of a laminated anisotropic shallow shell of quadrilateral planform subjected to uniform normal loading.

  16. Acoustic design sensitivity analysis of structural sound radiation

    Institute of Scientific and Technical Information of China (English)

    许智生

    2009-01-01

    This paper presents an acoustic design sensitivity(ADS)analysis on sound radiation of structures by using the boundary element method(BEM).We calculated the velocity distribution of the thin plate by analytical method and the surface sound pressure by Rayleigh integral,and expressed the sound radiation power of the structure in a positive definite quadratic form of the Hermitian with an impedance matrix.The ADS analysis of the plate was thus translated into the analysis of structure dynamic sensitivity and ...

  17. The dream of Irma's injection: a structural analysis.

    Science.gov (United States)

    Kuper, A; Stone, A A

    1982-10-01

    Lévi-Strauss developed a radically new, structural approach to the analysis of myth that may be adapted for use in the analysis of dreams. The method provides an alternative to psychoanalytic dream interpretation, focusing particularly on the internal dialectic of the dream--the movement from the initial premise to the resolution. This emphasis on the internal coherence and structured development of the dream contrasts strongly with the Freudian piecemeal decoding of dreams. The method is exemplified by analysis of Freud's classic Irma dream; it reveals a structure and message that have hitherto remained obscure. The interpretation connects the dream to Freud's theoretical ideas rather than to his supposed psychosexual fixations.

  18. ANOVA like analysis for structured families of stochastic matrices

    Science.gov (United States)

    Dias, Cristina; Santos, Carla; Varadinov, Maria; Mexia, João T.

    2016-12-01

    Symmetric stochastic matrices width a width a dominant eigenvalue λ and the corresponding eigenvector α appears in many applications. Such matrices can be written as M =λ α αt+E¯. Thus β = λ α will be the structure vector. When the matrices in such families correspond to the treatments of a base design we can carry out a ANOVA like analysis of the action of the treatments in the model on the structured vectors. This analysis can be transversal-when we worked width homologous components and - longitudinal when we consider contrast on the components of each structure vector. The analysis will be briefly considered at the end of our presentation.

  19. Protective Structure Backpacking and In-Structure Shock Isolation Systems Analysis and Design.

    Science.gov (United States)

    A parametric analysis is used to develop feasible backpacking -structure configurations and to determine the effect of backpacking on the responses of...the study determined the effectiveness of backpacking in attenuating the structure motions and in reducing the peak stresses and peak accelerations...in the structure. The second phase investigated the response of various shock isolation systems to structure input motions from preferred backpacking

  20. Molecular and structural analysis of viscoelastic properties

    Science.gov (United States)

    Yapp, Rebecca D.; Kalyanam, Sureshkumar; Insana, Michael F.

    2007-03-01

    Elasticity imaging is emerging as an important tool for breast cancer detection and monitoring of treatment. Viscoelastic image contrast in breast lesions is generated by disease specific processes that modify the molecular structure of connective tissues. We showed previously that gelatin hydrogels exhibit mechanical behavior similar to native collagen found in breast tissue and therefore are suitable as phantoms for elasticity imaging. This paper summarizes our study of the viscoelastic properties of hydrogels designed to discover molecular-scale sources of elasticity image contrast.

  1. Structural analysis of ITER multi-purpose deployer

    Energy Technology Data Exchange (ETDEWEB)

    Manuelraj, Manoah Stephen, E-mail: manoah@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat 382428 (India); Dutta, Pramit; Gotewal, Krishan Kumar; Rastogi, Naveen [Institute for Plasma Research, Gandhinagar, Gujarat 382428 (India); Tesini, Alessandro [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 1306 St Paul lez Durance Cedex (France); Choi, Chang-Hwan, E-mail: chang-hwan.choi@iter.org [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 1306 St Paul lez Durance Cedex (France)

    2016-11-01

    Highlights: • System modelling for structural analysis of the Multi-Purpose Deployer (MPD). • Finite element modeling of the Multi-Purpose Deployer (MPD). • Static, modal and seismic response analysis of the Multi-Purpose Deployer (MPD). • Iterative structural analysis and design update to satisfy the structural criteria. • Modal analysis for various kinematic configurations. • Reaction force calculations on the interfacing systems. - Abstract: The Multi-Purpose Deployer (MPD) is a general purpose ITER in-vessel remote handling (RH) system. The main handling equipment, known as the MPD Transporter, consists of a series of linked bodies, which provide anchoring to the vacuum vessel port and an articulated multi-degree of freedom motion to perform various in-vessel maintenance tasks. During the in-vessel operations, the structural integrity of the system should be guaranteed against various operational and seismic loads. This paper presents the structural analysis results of the concept design of the MPD Transporter considering the seismic events. Static structural, modal and frequency response spectrum analyses have been performed to verify the structural integrity of the system, and to provide reaction forces to the interfacing systems such as vacuum vessel and cask. Iterative analyses and design updates are carried out based on the reference design of the system to improve the structural behavior of the system. The frequency responses of the system in various kinematics and payloads are assessed.

  2. Structural analysis of reactor fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Weeks, R.W.

    1977-01-01

    An overview of fuel-element modeling is presented that traces the development of codes for the prediction of light-water-reactor and fast-breeder-reactor fuel-element performance. It is concluded that although the mathematical analysis is now far advanced, the development and incorporation of mechanistic constitutive equations has not kept pace. The resultant reliance on empirical correlations severely limits the physical insight that can be gained from code extrapolations. Current efforts include modeling of alternate fuel systems, analysis of local fuel-cladding interactions, and development of a predictive capability for off-normal behavior. Future work should help remedy the current constitutive deficiencies and should include the development of deterministic failure criteria for use in design.

  3. Musical Structural Analysis Database Based on GTTM

    OpenAIRE

    Hamanaka, Masatoshi; Hirata, Keiji; Tojo, Satoshi

    2014-01-01

    This paper, we present the publication of our analysis data and analyzing tool based on the generative theory of tonal music (GTTM). Musical databases such as score databases, instrument sound databases, and musical pieces with standard MIDI files and annotated data are key to advancements in the field of music information technology. We started implementing the GTTM on a computer in 2004 and ever since have collected and publicized test data by musicologists in a step-by-step manner. In our ...

  4. Structure analysis on synthetic emerald crystals

    Science.gov (United States)

    Lee, Pei-Lun; Lee, Jiann-Shing; Huang, Eugene; Liao, Ju-Hsiou

    2013-05-01

    Single crystals of emerald synthesized by means of the flux method were adopted for crystallographic analyses. Emerald crystals with a wide range of Cr3+-doping content up to 3.16 wt% Cr2O3 were examined by X-ray single crystal diffraction refinement method. The crystal structures of the emerald crystals were refined to R 1 (all data) of 0.019-0.024 and w R 2 (all data) of 0.061-0.073. When Cr3+ substitutes for Al3+, the main adjustment takes place in the Al-octahedron and Be-tetrahedron. The effect of substitution of Cr3+ for Al3+ in the beryl structure results in progressively lengthening of the Al-O distance, while the length of the other bonds remains nearly unchanged. The substitution of Cr3+ for Al3+ may have caused the expansion of a axis, while keeping the c axis unchanged in the emerald lattice. As a consequence, the Al-O-Si and Al-O-Be bonding angles are found to decrease, while the angle of Si-O-Be increases as the Al-O distance increases during the Cr replacement.

  5. Structural and quantitative analysis of Equisetum alkaloids.

    Science.gov (United States)

    Cramer, Luise; Ernst, Ludger; Lubienski, Marcus; Papke, Uli; Schiebel, Hans-Martin; Jerz, Gerold; Beuerle, Till

    2015-08-01

    Equisetum palustre L. is known for its toxicity for livestock. Several studies in the past addressed the isolation and identification of the responsible alkaloids. So far, palustrine (1) and N(5)-formylpalustrine (2) are known alkaloids of E. palustre. A HPLC-ESI-MS/MS method in combination with simple sample work-up was developed to identify and quantitate Equisetum alkaloids. Besides the two known alkaloids six related alkaloids were detected in different Equisetum samples. The structure of the alkaloid palustridiene (3) was derived by comprehensive 1D and 2D NMR experiments. N(5)-Acetylpalustrine (4) was also thoroughly characterized by NMR for the first time. The structure of N(5)-formylpalustridiene (5) is proposed based on mass spectrometry results. Twenty-two E. palustre samples were screened by a HPLC-ESI-MS/MS method after development of a simple sample work-up and in most cases the set of all eight alkaloids were detected in all parts of the plant. A high variability of the alkaloid content and distribution was found depending on plant organ, plant origin and season ranging from 88 to 597mg/kg dried weight. However, palustrine (1) and the alkaloid palustridiene (3) always represented the main alkaloids. For the first time, a comprehensive identification, quantitation and distribution of Equisetum alkaloids was achieved.

  6. Nonlinear transient analysis of joint dominated structures

    Science.gov (United States)

    Chapman, J. M.; Shaw, F. H.; Russell, W. C.

    1987-01-01

    A residual force technique is presented that can perform the transient analyses of large, flexible, and joint dominated structures. The technique permits substantial size reduction in the number of degrees of freedom describing the nonlinear structural models and can account for such nonlinear joint phenomena as free-play and hysteresis. In general, joints can have arbitrary force-state map representations but these are used in the form of residual force maps. One essential feature of the technique is to replace the arbitrary force-state maps describing the nonlinear joints with residual force maps describing the truss links. The main advantage of this replacement is that the incrementally small relative displacements and velocities across a joint are not monitored directly thereby avoiding numerical difficulties. Instead, very small and 'soft' residual forces are defined giving a numerically attractive form for the equations of motion and thereby permitting numerically stable integration algorithms. The technique was successfully applied to the transient analyses of a large 58 bay, 60 meter truss having nonlinear joints. A method to perform link testing is also presented.

  7. Structuring as a Basis for Product Modelling

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hansen, Claus Thorp

    1999-01-01

    Structure means the way which things are built up. A composite product does not exhibit one structure, but hides in its structure of parts several different structuring principles, which fit the production, service, transport etc. Structuring of product models is complex where many factors...... are influencing. This paper identifies four factors that are influencing the structure of a product model: genetics, functionality/property, product life and product assortment. Three principles, which support determination of product model structures, are proposed....

  8. Data analysis of asymmetric structures advanced approaches in computational statistics

    CERN Document Server

    Saito, Takayuki

    2004-01-01

    Data Analysis of Asymmetric Structures provides a comprehensive presentation of a variety of models and theories for the analysis of asymmetry and its applications and provides a wealth of new approaches in every section. It meets both the practical and theoretical needs of research professionals across a wide range of disciplines and  considers data analysis in fields such as psychology, sociology, social science, ecology, and marketing. In seven comprehensive chapters this guide details theories, methods, and models for the analysis of asymmetric structures in a variety of disciplines and presents future opportunities and challenges affecting research developments and business applications.

  9. Statistical energy analysis of complex structures, phase 2

    Science.gov (United States)

    Trudell, R. W.; Yano, L. I.

    1980-01-01

    A method for estimating the structural vibration properties of complex systems in high frequency environments was investigated. The structure analyzed was the Materials Experiment Assembly, (MEA), which is a portion of the OST-2A payload for the space transportation system. Statistical energy analysis (SEA) techniques were used to model the structure and predict the structural element response to acoustic excitation. A comparison of the intial response predictions and measured acoustic test data is presented. The conclusions indicate that: the SEA predicted the response of primary structure to acoustic excitation over a wide range of frequencies; and the contribution of mechanically induced random vibration to the total MEA is not significant.

  10. Applications of Mass Spectrometry to Structural Analysis of Marine Oligosaccharides

    Directory of Open Access Journals (Sweden)

    Yinzhi Lang

    2014-06-01

    Full Text Available Marine oligosaccharides have attracted increasing attention recently in developing potential drugs and biomaterials for their particular physical and chemical properties. However, the composition and sequence analysis of marine oligosaccharides are very challenging for their structural complexity and heterogeneity. Mass spectrometry (MS has become an important technique for carbohydrate analysis by providing more detailed structural information, including molecular mass, sugar constituent, sequence, inter-residue linkage position and substitution pattern. This paper provides an overview of the structural analysis based on MS approaches in marine oligosaccharides, which are derived from some biologically important marine polysaccharides, including agaran, carrageenan, alginate, sulfated fucan, chitosan, glycosaminoglycan (GAG and GAG-like polysaccharides. Applications of electrospray ionization mass spectrometry (ESI-MS are mainly presented and the general applications of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS are also outlined. Some technical challenges in the structural analysis of marine oligosaccharides by MS have also been pointed out.

  11. Applications of mass spectrometry to structural analysis of marine oligosaccharides.

    Science.gov (United States)

    Lang, Yinzhi; Zhao, Xia; Liu, Lili; Yu, Guangli

    2014-06-30

    Marine oligosaccharides have attracted increasing attention recently in developing potential drugs and biomaterials for their particular physical and chemical properties. However, the composition and sequence analysis of marine oligosaccharides are very challenging for their structural complexity and heterogeneity. Mass spectrometry (MS) has become an important technique for carbohydrate analysis by providing more detailed structural information, including molecular mass, sugar constituent, sequence, inter-residue linkage position and substitution pattern. This paper provides an overview of the structural analysis based on MS approaches in marine oligosaccharides, which are derived from some biologically important marine polysaccharides, including agaran, carrageenan, alginate, sulfated fucan, chitosan, glycosaminoglycan (GAG) and GAG-like polysaccharides. Applications of electrospray ionization mass spectrometry (ESI-MS) are mainly presented and the general applications of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) are also outlined. Some technical challenges in the structural analysis of marine oligosaccharides by MS have also been pointed out.

  12. Economic analysis of the structure, Integration and Performance of ...

    African Journals Online (AJOL)

    Economic analysis of the structure, Integration and Performance of Rice Markets in Dekina Local Government Area of Kogi ... Open Access DOWNLOAD FULL TEXT ... The data for the study were collected with the aid of a questionnaire.

  13. Convected transient analysis for large space structures maneuver and deployment

    Science.gov (United States)

    Housner, J.

    1984-01-01

    Convected-transient analysis techniques in the finite-element method are used to investigate the deployment and maneuver of large spacecraft structures with multiple-member flexible trusses and frames. Numerical results are presented for several sample problems.

  14. Wheat yield dynamics: a structural econometric analysis.

    Science.gov (United States)

    Sahin, Afsin; Akdi, Yilmaz; Arslan, Fahrettin

    2007-10-15

    In this study we initially have tried to explore the wheat situation in Turkey, which has a small-open economy and in the member countries of European Union (EU). We have observed that increasing the wheat yield is fundamental to obtain comparative advantage among countries by depressing domestic prices. Also the changing structure of supporting schemes in Turkey makes it necessary to increase its wheat yield level. For this purpose, we have used available data to determine the dynamics of wheat yield by Ordinary Least Square Regression methods. In order to find out whether there is a linear relationship among these series we have checked each series whether they are integrated at the same order or not. Consequently, we have pointed out that fertilizer usage and precipitation level are substantial inputs for producing high wheat yield. Furthermore, in respect for our model, fertilizer usage affects wheat yield more than precipitation level.

  15. Structural shell analysis understanding and application

    CERN Document Server

    Blaauwendraad, Johan

    2014-01-01

    The mathematical description of the properties of a shell is much more elaborate than those of beam and plate structures. Therefore many engineers and architects are unacquainted with aspects of shell behaviour and design, and are not familiar with sufficiently reliable shell theories for the different shell types as derived in the middle of the 20th century. Rather than contributing to theory development, this university textbook focuses on architectural and civil engineering schools. Of course, practising professionals will profit from it as well. The book deals with thin elastic shells, in particular with cylindrical, conical and spherical types, and with elliptic and hyperbolic paraboloids. The focus is on roofs, chimneys, pressure vessels and storage tanks. Special attention is paid to edge bending disturbance zones, which is indispensable knowledge in FE meshing. A substantial part of the book results from research efforts in the mid 20th century at Delft University of Technology. As such, it is a valua...

  16. Ellipsometric Analysis of Cadmium Telluride Films’ Structure

    OpenAIRE

    Anna Evmenova; Volodymyr Odarych; Mykola Vuichyk; Fedir Sizov

    2015-01-01

    Ellipsometric analysis of CdTe films grown on Si and CdHgTe substrates at the “hot-wall” epitaxy vacuum setup has been performed. It has been found that ellipsometric data calculation carried out by using a simple one-layer film model leads to radical distortion of optical constants spectra: this fact authenticates the necessity to attract a more complicated model that should include heterogeneity of films. Ellipsometric data calculation within a two-layer film model permitted to conclude tha...

  17. ‘Designerly’ Analysis of Participation Structures

    DEFF Research Database (Denmark)

    Buur, Jacob; Beuthel, Maria Rosa; Caglio, Agnese

    2013-01-01

    With the inclusion of not only users but stake-holders of many different kinds, design processes turn into complex collaborative challenges. Thus, improving design practices requires research into how people participate and contribute in social interaction. But research methods for understand......-ing such activities tend to be highly analytical and hence difficult for design researchers to engage with, if results are meant to be actionable. Through a series of experiments we develop tangible support for a ‘designerly’ interaction analysis of one important aspect of collaborative design activities...

  18. Left or right? Sources of political orientation: the roles of genetic factors, cultural transmission, assortative mating, and personality.

    Science.gov (United States)

    Kandler, Christian; Bleidorn, Wiebke; Riemann, Rainer

    2012-03-01

    In this study, we used an extended twin family design to investigate the influences of genetic and cultural transmission as well as different sources of nonrandom mating on 2 core aspects of political orientation: acceptance of inequality and rejecting system change. In addition, we studied the sources of phenotypic links between Big Five personality traits and political beliefs using self- and other reports. Data of 1,992 individuals (224 monozygotic and 166 dizygotic twin pairs, 92 unmatched twins, 530 spouses of twins, 268 fathers, and 322 mothers) were analyzed. Genetically informative analyses showed that political attitudes are genetically but not environmentally transmitted from parents to offspring and that a substantial proportion of this genetic variance can be accounted for by genetic variance in personality traits. Beyond genetic effects and genotypic assortative mating, generation-specific environmental sources act to increase twins' and spouses' resemblance in political beliefs. The results suggest multiple sources of political orientations in a modern democracy.

  19. Push-Over Analysis for Concrete Structures of Tall Building

    Institute of Scientific and Technical Information of China (English)

    朱杰江; 张佩军; 吕西林; 容柏生

    2004-01-01

    In this paper, push-over analysis for tall concrete structures was made and a corresponding computer program was given.Several kinds of elements in the program were considered to meet the demand of tall buildings with complex structural type. These elements included beam-column element for beams and columns, single slice wall element and three vertical line element for walls, and tube-wall element for tubes. Computational example for verifying the models indicates that the result obtained by this method is identical with a well-known test result and the program can be used to search for the full process of structural reaction, even the softening stage of the structure. With this push-over analysis method, an actual tall building with complex structural type was analyzed, and the result has been put into practice of the structural design of the building.

  20. Solid lipid nanoparticles regulate functional assortment of mouse mesenchymal stem cells.

    Science.gov (United States)

    Chabra, S; Ranjan, M; Bhandari, R; Kaur, T; Aggrawal, M; Puri, V; Mahajan, N; Kaur, I P; Puri, S; Sobti, R C

    2011-01-01

    A rapid decline in self-renewability, viability and function, of isolated stem cells are major hurdles in developing cell based therapies. There has been an increasing interest towards identifying a support material for maintaining stem cell features of the isolated cells. Pioneering observations of the present paper, demonstrate functionally diverse potential of Solid Lipid Nanoparticles (SLNs) in deciding the fate & behavior of mouse mesenchymal stem cell. The evidences are provided to show the dual nature of the SLNs for being a scaffold for the stem cell attachment, to retain stemness, and as reagent for inducing stem cell differentiation. Scanning electron microscopic examinations together with expression analysis were used to conform to such observations. Results of the study thus suggest that Solid lipid nanoparticles can be used as a good support material when functionalized to achieve adhesive properties and as a molecular paradigm for studying the adipocytic differentiation. We envisage a new role of SLNs towards regulating stem cell character by orchestrating the structural alignment during preparation of Solid lipid nanoparticles.

  1. Discrete Discriminant analysis based on tree-structured graphical models

    DEFF Research Database (Denmark)

    Perez de la Cruz, Gonzalo; Eslava, Guillermina

    The purpose of this paper is to illustrate the potential use of discriminant analysis based on tree{structured graphical models for discrete variables. This is done by comparing its empirical performance using estimated error rates for real and simulated data. The results show that discriminant...... analysis based on tree{structured graphical models is a simple nonlinear method competitive with, and sometimes superior to, other well{known linear methods like those assuming mutual independence between variables and linear logistic regression....

  2. Probabilistic Nonlinear Analysis of Reinforced Concrete Bubbler Tower Structure Failure

    Directory of Open Access Journals (Sweden)

    Králik Juraj

    2014-06-01

    Full Text Available This paper describes the reliability analysis of concrete bubbler tower structure of nuclear power plant with the reactor WWER 440 under high internal overpressure. There is showed summary of calculation models and calculation methods for the probability analysis of the structural integrity considering degradation effects and high internal overpressure. The uncertainties of the resistance and the calculation model were taking in the account in the RSM method.

  3. Implementation of efficient sensitivity analysis for optimization of large structures

    Science.gov (United States)

    Umaretiya, J. R.; Kamil, H.

    1990-01-01

    The paper presents the theoretical bases and implementation techniques of sensitivity analyses for efficient structural optimization of large structures, based on finite element static and dynamic analysis methods. The sensitivity analyses have been implemented in conjunction with two methods for optimization, namely, the Mathematical Programming and Optimality Criteria methods. The paper discusses the implementation of the sensitivity analysis method into our in-house software package, AutoDesign.

  4. Discrete Discriminant analysis based on tree-structured graphical models

    DEFF Research Database (Denmark)

    Perez de la Cruz, Gonzalo; Eslava, Guillermina

    The purpose of this paper is to illustrate the potential use of discriminant analysis based on tree{structured graphical models for discrete variables. This is done by comparing its empirical performance using estimated error rates for real and simulated data. The results show that discriminant a...... analysis based on tree{structured graphical models is a simple nonlinear method competitive with, and sometimes superior to, other well{known linear methods like those assuming mutual independence between variables and linear logistic regression....

  5. Seismic design and analysis of nuclear power plant structures

    Institute of Scientific and Technical Information of China (English)

    Pentti Varpasuo

    2013-01-01

    The seismic design and analysis of nuclear power plant (NPP) begin with the seismic hazard assessment and design ground motion development for the site.The following steps are needed for the seismic hazard assessment and design ground motion development:a.the development of regional seismo-tectonic model with seismic source areas within 500 km radius centered to the site; b.the development of strong motion prediction equations;c.logic three development for taking into account uncertainties and seismic hazard quantification; d.the development of uniform hazard response spectra for ground motion at the site; e.simulation of acceleration time histories compatible with uniform hazard response spectra.The following phase two in seismic design of NPP structures is the analysis of structural response for the design ground motion.This second phase of the process consists of the following steps:a.development of structural models of the plant buildings; b.development of the soil model underneath the plant buildings for soil-structure interaction response analysis; c.determination of in-structure response spectra for the plant buildings for the equipment response analysis.In the third phase of the seismic design and analysis the equipment is analyzed on the basis of in-structure response spectra.For this purpose the structural models of the mechanical components and piping in the plant are set up.In large 3D-structural models used today the heaviest equipment of the primary coolant circuit is included in the structural model of the reactor building.In the fourth phase the electrical equipment and automation and control equipment are seismically qualified with the aid of the in-structure spectra developed in the phase two using large three-axial shaking tables.For this purpose the smoothed envelope spectra for calculated in-structure spectra are constructed and acceleration time is fitted to these smoothed envelope spectra.

  6. Structural and functional analysis of rice genome

    Indian Academy of Sciences (India)

    Akhilesh K. Tyagi; Jitendra P. Khurana; Paramjit Khurana; Saurabh Raghuvanshi; Anupama Gaur; Anita Kapur; Vikrant Gupta; Dibyendu Kumar; V. Ravi; Shubha Vij; Parul Khurana; Sulabha Sharma

    2004-04-01

    Rice is an excellent system for plant genomics as it represents a modest size genome of 430 Mb. It feeds more than half the population of the world. Draft sequences of the rice genome, derived by whole-genome shotgun approach at relatively low coverage (4–6 X), were published and the International Rice Genome Sequencing Project (IRGSP) declared high quality (>10 X), genetically anchored, phase 2 level sequence in 2002. In addition, phase 3 level finished sequence of chromosomes 1, 4 and 10 (out of 12 chromosomes of rice) has already been reported by scientists from IRGSP consortium. Various estimates of genes in rice place the number at > 50,000. Already, over 28,000 full-length cDNAs have been sequenced, most of which map to genetically anchored genome sequence. Such information is very useful in revealing novel features of macro- and micro-level synteny of rice genome with other cereals. Microarray analysis is unraveling the identity of rice genes expressing in temporal and spatial manner and should help target candidate genes useful for improving traits of agronomic importance. Simultaneously, functional analysis of rice genome has been initiated by marker-based characterization of useful genes and employing functional knock-outs created by mutation or gene tagging. Integration of this enormous information is expected to catalyze tremendous activity on basic and applied aspects of rice genomics.

  7. Structural Analysis of Women’s Heptathlon

    Directory of Open Access Journals (Sweden)

    Freya Gassmann

    2016-02-01

    Full Text Available The heptathlon comprises the results of seven single disciplines, assuming an equal influence from each discipline, depending on the measured performance. Data analysis was based on the data recorded for the individual performances of the 10 winning heptathletes in the World Athletics Championships from 1987 to 2013 and the Olympic Games from 1988 to 2012. In addition to descriptive analysis methods, correlations, bivariate and multivariate linear regressions, and panel data regressions were used. The transformation of the performances from seconds, centimeters, and meters into points showed that the individual disciplines do not equally affect the overall competition result. The currently valid conversion formula for the run, jump, and throw disciplines prefers the sprint and jump disciplines but penalizes the athletes performing in the 800 m run, javelin throw, and shotput disciplines. Furthermore, 21% to 48% of the variance of the sum of points can be attributed to the performances in the disciplines of long jump, 200 m sprint, 100 m hurdles, and high jump. To balance the effects of the single disciplines in the heptathlon, the formula to calculate points should be reevaluated.

  8. Parenting across Racial and Class Lines: Assortative Mating Patterns of New Parents Who Are Married, Cohabiting, Dating or No Longer Romantically Involved

    Science.gov (United States)

    Goldstein, Joshua R.; Harknett, Kristen

    2006-01-01

    We examine the assortative mating patterns of new parents who are married, cohabiting, romantically involved and no longer romantically involved. Using data from the Fragile Families and Child Wellbeing study, we find that relationship status at the time of a birth depends mainly on father's race rather than on whether mother and father's…

  9. Multiscale analysis of structure development in expanded starch snacks

    NARCIS (Netherlands)

    Sman, van der R.G.M.; Broeze, J.

    2014-01-01

    In this paper we perform a multiscale analysis of the food structuring process of the expansion of starchy snack foods like keropok, which obtains a solid foam structure. In particular, we want to investigate the validity of the hypothesis of Kokini and coworkers, that expansion is optimal at the mo

  10. Tools for analysis of Dirac structures on Hilbert spaces

    NARCIS (Netherlands)

    Golo, G.; Iftime, O.V.; Zwart, Heiko J.; van der Schaft, Arjan

    2004-01-01

    In this paper tools for the analysis of Dirac structures on Hilbert spaces are developed. Some properties are pointed out and two natural representations of Dirac structures on Hilbert spaces are presented. The theory is illustrated on the example of the ideal transmission line.

  11. Reliability-Analysis of Offshore Structures using Directional Loads

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Bloch, Allan; Sterndorff, M. J.

    2000-01-01

    Reliability analyses of offshore structures such as steel jacket platforms are usually performed using stochastic models for the wave loads based on the omnidirectional wave height. However, reliability analyses with respect to structural failure modes such as total collapse of a structure...... heights from the central part of the North Sea. It is described how the stochastic model for the directional wave heights can be used in a reliability analysis where total collapse of offshore steel jacket platforms is considered....

  12. Ellipsometric Analysis of Cadmium Telluride Films’ Structure

    Directory of Open Access Journals (Sweden)

    Anna Evmenova

    2015-01-01

    Full Text Available Ellipsometric analysis of CdTe films grown on Si and CdHgTe substrates at the “hot-wall” epitaxy vacuum setup has been performed. It has been found that ellipsometric data calculation carried out by using a simple one-layer film model leads to radical distortion of optical constants spectra: this fact authenticates the necessity to attract a more complicated model that should include heterogeneity of films. Ellipsometric data calculation within a two-layer film model permitted to conclude that cadmium telluride films have an outer layer that consists of the three-component mixture of CdTe, cavities, and basic matter oxide. Ratio of mixture components depends on the time of deposition, that is, on the film thickness. The inner layer consists of cadmium telluride.

  13. Sediment Analysis Using a Structured Programming Approach

    Directory of Open Access Journals (Sweden)

    Daniela Arias-Madrid

    2012-12-01

    Full Text Available This paper presents an algorithm designed for the analysis of a sedimentary sample of unconsolidated material and seeks to identify very quickly the main features that occur in a sediment and thus classify them fast and efficiently. For this purpose, it requires that the weight of each particle size to be entered in the program and using the method of Moments, which is based on four equations representing the mean, standard deviation, skewness and kurtosis, is found the attributes of the sample in few seconds. With the program these calculations are performed in an effective and more accurately way, obtaining also the explanations of the results of the features such as grain size, sorting, symmetry and origin, which helps to improve the study of sediments and in general the study of sedimentary rocks.

  14. Structural model analysis of multiple quantitative traits.

    Directory of Open Access Journals (Sweden)

    Renhua Li

    2006-07-01

    Full Text Available We introduce a method for the analysis of multilocus, multitrait genetic data that provides an intuitive and precise characterization of genetic architecture. We show that it is possible to infer the magnitude and direction of causal relationships among multiple correlated phenotypes and illustrate the technique using body composition and bone density data from mouse intercross populations. Using these techniques we are able to distinguish genetic loci that affect adiposity from those that affect overall body size and thus reveal a shortcoming of standardized measures such as body mass index that are widely used in obesity research. The identification of causal networks sheds light on the nature of genetic heterogeneity and pleiotropy in complex genetic systems.

  15. Tanker Structural Analysis for Minor Collisions

    Science.gov (United States)

    1975-12-01

    masses (including virtual masses of the water), the initial bearings, and velocities. 2. Throughout the analysis, the bow of the striking ship Is...initial velocity of the striking ship: m( F ______ (1 t 0 V20) =0.0 f= virtual mass, ship I 2 = virtual mass, ship 2~ m I V . V f ’ K’ Jt 11 FIUR m-2...situ .K. 5Y( i~ lZAKD bow $H 14ILIQj P Lh5T I C. EQ k Y kps) 0 0 94-1 W~IAk) J~~E 0 oC4O.1 ,I Hi PL~c,1C. tlA% ;OQ)- AULA / ;0) 4 4 4~IN -c Q

  16. Diameter structure modeling and the calculation of plantation volume of black poplar clones

    Directory of Open Access Journals (Sweden)

    Andrašev Siniša

    2004-01-01

    Full Text Available A method of diameter structure modeling was applied in the calculation of plantation (stand volume of two black poplar clones in the section Aigeiros (Duby: 618 (Lux and S1-8. Diameter structure modeling by Weibull function makes it possible to calculate the plantation volume by volume line. Based on the comparison of the proposed method with the existing methods, the obtained error of plantation volume was less than 2%. Diameter structure modeling and the calculation of plantation volume by diameter structure model, by the regularity of diameter distribution, enables a better analysis of the production level and assortment structure and it can be used in the construction of yield and increment tables.

  17. A method for rapid similarity analysis of RNA secondary structures

    Directory of Open Access Journals (Sweden)

    Liu Na

    2006-11-01

    Full Text Available Abstract Background Owing to the rapid expansion of RNA structure databases in recent years, efficient methods for structure comparison are in demand for function prediction and evolutionary analysis. Usually, the similarity of RNA secondary structures is evaluated based on tree models and dynamic programming algorithms. We present here a new method for the similarity analysis of RNA secondary structures. Results Three sets of real data have been used as input for the example applications. Set I includes the structures from 5S rRNAs. Set II includes the secondary structures from RNase P and RNase MRP. Set III includes the structures from 16S rRNAs. Reasonable phylogenetic trees are derived for these three sets of data by using our method. Moreover, our program runs faster as compared to some existing ones. Conclusion The famous Lempel-Ziv algorithm can efficiently extract the information on repeated patterns encoded in RNA secondary structures and makes our method an alternative to analyze the similarity of RNA secondary structures. This method will also be useful to researchers who are interested in evolutionary analysis.

  18. Modelization and structural analysis of FDM parts

    Science.gov (United States)

    Martínez, J.; Diéguez, J. L.; Ares, J. E.; Pereira, A.; Pérez, J. A.

    2012-04-01

    Get prototypes from technologies of Rapid Prototyping (RP) is a very important step for the development of new products. In some cases, these prototypes have mechanical properties lower than the final product, which prevents the designers to use all of the potential that these technologies can provide. In this study the RP technology known as FDM (Fused Deposition Modeling) was used to manufacture samples used in tests, in where the orientation of deposition wires in layers were varying depending on manufacturing placement. Mechanical tests were performed to verify the stiffness of the final pieces obtained. The Classical Theory of Laminates (TCL) will be used to predict the mechanical behavior of the parts in different orientations of manufacturing. Thus, this study aims to evaluate the influence of the strategies in the deposition of construction material on the mechanical properties of parts obtained by the FDM and analyzes manufacturing factors for a future generation of a finite elements analytic model that could be used to obtain the structural behavior of parts made by rapid prototyping with FDM technology.

  19. Analysis of boron carbides' electronic structure

    Science.gov (United States)

    Howard, Iris A.; Beckel, Charles L.

    1986-01-01

    The electronic properties of boron-rich icosahedral clusters were studied as a means of understanding the electronic structure of the icosahedral borides such as boron carbide. A lower bound was estimated on bipolaron formation energies in B12 and B11C icosahedra, and the associated distortions. While the magnitude of the distortion associated with bipolaron formation is similar in both cases, the calculated formation energies differ greatly, formation being much more favorable on B11C icosahedra. The stable positions of a divalent atom relative to an icosahedral borane was also investigated, with the result that a stable energy minimum was found when the atom is at the center of the borane, internal to the B12 cage. If incorporation of dopant atoms into B12 cages in icosahedral boride solids is feasible, novel materials might result. In addition, the normal modes of a B12H12 cluster, of the C2B10 cage in para-carborane, and of a B12 icosahedron of reduced (D sub 3d) symmetry, such as is found in the icosahedral borides, were calculated. The nature of these vibrational modes will be important in determining, for instance, the character of the electron-lattice coupling in the borides, and in analyzing the lattice contribution to the thermal conductivity.

  20. STRUCTURAL ANALYSIS OF CONDITIONAL PREPARATION IN JUDO

    Directory of Open Access Journals (Sweden)

    Slavko Obadov

    2006-06-01

    Full Text Available Conditional preparation is a constituent part of overall sports preparation. Conditional training might be defined as a process of improvement of a sportsman’s functional and motor abilities, morphological characteristics, health, as well as the required motor knowledge. Conditional preparation can be might be classified as: general, basic and situational conditional preparation. Programs of the conditional training might be classified as: developing, resuming, recovering, preventive and recovering ones. High level of the general physical preparation enables maximum demonstration of the physical abilities of a sportsman during the stage of improvement of the specific motor abilities. Good general preparation of a sportsman enables him to push beyond his functional limits in order to cope with heavy loads easier, which subsequently enables him to achieve top performance level. Basic conditional preparation assumes the development of the most important judo abilities. Specific conditional preparation is related directly to the execution of different structural elements under the conditional requirements. Situational conditional preparation enables integration of the tactical and conditional training.

  1. Structure analysis of active components of traditional Chinese medicines

    DEFF Research Database (Denmark)

    Zhang, Wei; Sun, Qinglei; Liu, Jianhua

    2013-01-01

    Traditional Chinese Medicines (TCMs) have been widely used for healing of different health problems for thousands of years. They have been used as therapeutic, complementary and alternative medicines. TCMs usually consist of dozens to hundreds of various compounds, which are extracted from raw...... samples. NMR, on the other hand, provides not only information of primary structures but also information of higher order structures, complementing the components structure analysis by HPLC-MS. The most recent progress in the analysis of the commonly used TCMs will be summarized...

  2. Structural mode significance using INCA. [Interactive Controls Analysis computer program

    Science.gov (United States)

    Bauer, Frank H.; Downing, John P.; Thorpe, Christopher J.

    1990-01-01

    Structural finite element models are often too large to be used in the design and analysis of control systems. Model reduction techniques must be applied to reduce the structural model to manageable size. In the past, engineers either performed the model order reduction by hand or used distinct computer programs to retrieve the data, to perform the significance analysis and to reduce the order of the model. To expedite this process, the latest version of INCA has been expanded to include an interactive graphical structural mode significance and model order reduction capability.

  3. Structural mode significance using INCA. [Interactive Controls Analysis computer program

    Science.gov (United States)

    Bauer, Frank H.; Downing, John P.; Thorpe, Christopher J.

    1990-01-01

    Structural finite element models are often too large to be used in the design and analysis of control systems. Model reduction techniques must be applied to reduce the structural model to manageable size. In the past, engineers either performed the model order reduction by hand or used distinct computer programs to retrieve the data, to perform the significance analysis and to reduce the order of the model. To expedite this process, the latest version of INCA has been expanded to include an interactive graphical structural mode significance and model order reduction capability.

  4. Structural analysis of cell wall polysaccharides using PACE

    Energy Technology Data Exchange (ETDEWEB)

    Mortimer, Jennifer C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint BioEnergy Institute

    2017-01-01

    The plant cell wall is composed of many complex polysaccharides. The composition and structure of the polysaccharides affect various cell properties including cell shape, cell function and cell adhesion. Many techniques to characterize polysaccharide structure are complicated, requiring expensive equipment and specialized operators e.g. NMR, MALDI-MS. PACE (Polysaccharide Analysis using Carbohydrate gel Electrophoresis) uses a simple, rapid technique to analyze polysaccharide quantity and structure (Goubet et al. 2002). Whilst the method here describes xylan analysis, it can be applied (by use of the appropriate glycosyl hydrolase) to any cell wall polysaccharide.

  5. Structural analysis of Aircraft fuselage splice joint

    Science.gov (United States)

    Udaya Prakash, R.; Kumar, G. Raj; Vijayanandh, R.; Senthil Kumar, M.; Ramganesh, T.

    2016-09-01

    In Aviation sector, composite materials and its application to each component are one of the prime factors of consideration due to the high strength to weight ratio, design flexibility and non-corrosive so that the composite materials are widely used in the low weight constructions and also it can be treated as a suitable alternative to metals. The objective of this paper is to estimate and compare the suitability of a composite skin joint in an aircraft fuselage with different joints by simulating the displacement, normal stress, vonmises stress and shear stress with the help of numerical solution methods. The reference Z-stringer component of this paper is modeled by CATIA and numerical simulation is carried out by ANSYS has been used for splice joint presents in the aircraft fuselage with three combinations of joints such as riveted joint, bonded joint and hybrid joint. Nowadays the stringers are using to avoid buckling of fuselage skin, it has joined together by rivets and they are connected end to end by splice joint. Design and static analysis of three-dimensional models of joints such as bonded, riveted and hybrid are carried out and results are compared.

  6. Neighborhood structure effects on the Dynamic response of soil-structure interaction by harmonic analysis

    Directory of Open Access Journals (Sweden)

    Pan Dan-guang

    2015-01-01

    Full Text Available For realizing the variation of structural dynamic characteristics due to neighbor structure in buildings group, the surface structure is idealized as an equivalent single degree of freedom system with rigid base whose site consists of a single homogeneous layer. Based on the model, a equivalent method on the equivalent seismic excitation is proposed. Then, the differences of seismic response and equivalent seismic input between soil - structure interaction (SSI system and structure -soil-structure interaction (SSSI system are investigated by harmonic analysis. The numerical results show that dynamic responses would be underestimated in SSSI system when the forcing frequencies are close to the Natural frequency if the effects of neighborhood structure were ignored. Neighborhood structure would make the translational displacement increase and rocking vibration decrease. When establishing an effective seismic input, it is necessary to consider the impact of inertia interaction.

  7. Advanced analysis and design for fire safety of steel structures

    CERN Document Server

    Li, Guoqiang

    2013-01-01

    Advanced Analysis and Design for Fire Safety of Steel Structures systematically presents the latest findings on behaviours of steel structural components in a fire, such as the catenary actions of restrained steel beams, the design methods for restrained steel columns, and the membrane actions of concrete floor slabs with steel decks. Using a systematic description of structural fire safety engineering principles, the authors illustrate the important difference between behaviours of an isolated structural element and the restrained component in a complete structure under fire conditions. The book will be an essential resource for structural engineers who wish to improve their understanding of steel buildings exposed to fires. It is also an ideal textbook for introductory courses in fire safety for master’s degree programs in structural engineering, and is excellent reading material for final-year undergraduate students in civil engineering and fire safety engineering. Furthermore, it successfully bridges th...

  8. Structural analysis for diagnosis with application to ship propulsion problem

    DEFF Research Database (Denmark)

    Izadi-Zamanabadi, Roozbeh; Blanke, Mogens

    2002-01-01

    Aiming at design of algorithms for fault diagnosis, structural analysis of systems offers concise yet easy overall analysis. Graph-based matching, which is the essential tech-nique to obtain redundant information for diagnosis, is reconsidered in this paper. Matching is reformulated as a problem ...

  9. Structural analysis for diagnosis with application to ship propulsion problem

    DEFF Research Database (Denmark)

    Izadi-Zamanabadi, Roozbeh; Blanke, Mogens

    2002-01-01

    Aiming at design of algorithms for fault diagnosis, structural analysis of systems offers concise yet easy overall analysis. Graph-based matching, which is the essential tech-nique to obtain redundant information for diagnosis, is reconsidered in this paper. Matching is reformulated as a problem...

  10. Fluid-structure coupled analysis of underwater cylindrical shells

    Institute of Scientific and Technical Information of China (English)

    AI Shang-mao; SUN Li-ping

    2008-01-01

    Underwater cylindrical shell structures have been found a wide of application in many engineering fields,such as the element of marine,oil platforms,etc.The coupled vibration analysis is a hot issue for these underwater structures.The vibration characteristics of underwater structures are influenced not only by hydrodynamic pressure but also by hydrostatic pressure corresponding to different water depths.In this study,an acoustic finite element method was used to evaluate the underwater structures.Taken the hydrostatic pressure into account in terms of initial stress stiffness,an acoustical fluid-structure coupled analysis of underwater cylindrical shells has been made to study the effect of hydrodynamic pressures on natural frequency and sound radiation.By comparing with the frequencies obtained by the acoustic finite element method and by the added mass method based on the Bessel function,the validity of present analysis was checked.Finally,test samples of the sound radiation of stiffened cylindrical shells were acquired by a harmonic acoustic analysis.The results showed that hydrostatic pressure plays an important role in determining a large submerged body motion,and the characteristics of sound radiation change with water depth. Furthermore,the analysis methods and the results are of significant reference value for studies of other complicated submarine structures.

  11. Structure optimization and simulation analysis of the quartz micromachined gyroscope

    Science.gov (United States)

    Wu, Xuezhong; Wang, Haoxu; Xie, Liqiang; Dong, Peitao

    2014-03-01

    Structure optimization and simulation analysis of the quartz micromachined gyroscope are reported in this paper. The relationships between the structure parameters and the frequencies of work mode were analysed by finite element analysis. The structure parameters of the quartz micromachined gyroscope were optimized to reduce the difference between the frequencies of the drive mode and the sense mode. The simulation results were proved by testing the prototype gyroscope, which was fabricated by micro-electromechanical systems (MEMS) technology. Therefore, the frequencies of the drive mode and the sense mode can match each other by the structure optimization and simulation analysis of the quartz micromachined gyroscope, which is helpful in the design of the high sensitivity quartz micromachined gyroscope.

  12. Rapid structural analysis of nanomaterials in aqueous solutions

    Science.gov (United States)

    Ryuzaki, Sou; Tsutsui, Makusu; He, Yuhui; Yokota, Kazumichi; Arima, Akihide; Morikawa, Takanori; Taniguchi, Masateru; Kawai, Tomoji

    2017-04-01

    Rapid structural analysis of nanoscale matter in a liquid environment represents innovative technologies that reveal the identities and functions of biologically important molecules. However, there is currently no method with high spatio-temporal resolution that can scan individual particles in solutions to gain structural information. Here we report the development of a nanopore platform realizing quantitative structural analysis for suspended nanomaterials in solutions with a high z-axis and xy-plane spatial resolution of 35.8 ± 1.1 and 12 nm, respectively. We used a low thickness-to-diameter aspect ratio pore architecture for achieving cross sectional areas of analyte (i.e. tomograms). Combining this with multiphysics simulation methods to translate ionic current data into tomograms, we demonstrated rapid structural analysis of single polystyrene (Pst) beads and single dumbbell-like Pst beads in aqueous solutions.

  13. Structure optimization and simulation analysis of the quartz micromachined gyroscope

    Directory of Open Access Journals (Sweden)

    Xuezhong Wu

    2014-02-01

    Full Text Available Structure optimization and simulation analysis of the quartz micromachined gyroscope are reported in this paper. The relationships between the structure parameters and the frequencies of work mode were analysed by finite element analysis. The structure parameters of the quartz micromachined gyroscope were optimized to reduce the difference between the frequencies of the drive mode and the sense mode. The simulation results were proved by testing the prototype gyroscope, which was fabricated by micro-electromechanical systems (MEMS technology. Therefore, the frequencies of the drive mode and the sense mode can match each other by the structure optimization and simulation analysis of the quartz micromachined gyroscope, which is helpful in the design of the high sensitivity quartz micromachined gyroscope.

  14. Automated analysis of fundamental features of brain structures.

    Science.gov (United States)

    Lancaster, Jack L; McKay, D Reese; Cykowski, Matthew D; Martinez, Michael J; Tan, Xi; Valaparla, Sunil; Zhang, Yi; Fox, Peter T

    2011-12-01

    Automated image analysis of the brain should include measures of fundamental structural features such as size and shape. We used principal axes (P-A) measurements to measure overall size and shape of brain structures segmented from MR brain images. The rationale was that quantitative volumetric studies of brain structures would benefit from shape standardization as had been shown for whole brain studies. P-A analysis software was extended to include controls for variability in position and orientation to support individual structure spatial normalization (ISSN). The rationale was that ISSN would provide a bias-free means to remove elementary sources of a structure's spatial variability in preparation for more detailed analyses. We studied nine brain structures (whole brain, cerebral hemispheres, cerebellum, brainstem, caudate, putamen, hippocampus, inferior frontal gyrus, and precuneus) from the 40-brain LPBA40 atlas. This paper provides the first report of anatomical positions and principal axes orientations within a standard reference frame, in addition to "shape/size related" principal axes measures, for the nine brain structures from the LPBA40 atlas. Analysis showed that overall size (mean volume) for internal brain structures was preserved using shape standardization while variance was reduced by more than 50%. Shape standardization provides increased statistical power for between-group volumetric studies of brain structures compared to volumetric studies that control only for whole brain size. To test ISSN's ability to control for spatial variability of brain structures we evaluated the overlap of 40 regions of interest (ROIs) in a standard reference frame for the nine different brain structures before and after processing. Standardizations of orientation or shape were ineffective when not combined with position standardization. The greatest reduction in spatial variability was seen for combined standardizations of position, orientation and shape. These

  15. Structural analysis of superconducting dipole prototype for HIAF

    CERN Document Server

    Zhang, Xiaoying; Ni, Dongsheng; Chen, Yuquan; Wu, Wei; Ma, Lizhen

    2015-01-01

    The High Intensity Heavy-Ion Accelerator Facility is a new project in the Institute of Modern Physics. The dipole magnets of all rings are conceived as fast cycled superconducting magnet with high magnetic field and large gap, the warm iron and superconducting coil structure (superferric) is adopted. The reasonable structure design of coil and cryostat is very important for reliable operation. Based on the finite element software ANSYS, the mechanical analysis of electromagnetic stress, the thermal stress in the cooling down and the stress in the pumping are showed in detail. According to the analysis result, the supporter structure is the key problem of coil system. With reasonable support's structure design, the stress and the deformation of coil structure can be reduced effectively, which ensure the stable operation of superconducting coil system.

  16. Stress Analysis of Ellipsoidal Shell with Inner Guide Structure

    Institute of Scientific and Technical Information of China (English)

    Wei-Wei Zhang; Xiao-Song Wang; Meng Chen; Shi-Jian Yuan

    2014-01-01

    In order to overcome stress concentration and increase fatigue life of ellipsoidal shells with inner guide structure, the stress analysis for strength check is very important. Owing to the main sectional profile with ellipsoidal shape, the stress distribution for perfect ellipsoidal shell is firstly conducted based on the theoretical calculation and strain gauges measurement. The experiment results show that the stresses increase gradually from pole region to equatorial plane, but still within elastic range. Secondly, strain gauge measurement for ellipsoidal shells with inner guide structure is conducted. The results show that stresses are concentrated at the vicinity of bottom plate and beyond elastic range, so the structural redesign is needed. Finally based on the analysis mentioned above, a redesigned structure with local thickening is proposed. Experimental research shows that the stress varies more even after structural redesign and within allowable range. Numerical simulation shows that both the deformation and fatigue life after redesign are acceptable.

  17. Course transformation: Content, structure and effectiveness analysis

    Science.gov (United States)

    DuHadway, Linda P.

    The organization of learning materials is often limited by the systems available for delivery of such material. Currently, the learning management system (LMS) is widely used to distribute course materials. These systems deliver the material in a text-based, linear way. As online education continues to expand and educators seek to increase their effectiveness by adding more effective active learning strategies, these delivery methods become a limitation. This work demonstrates the possibility of presenting course materials in a graphical way that expresses important relations and provides support for manipulating the order of those materials. The ENABLE system gathers data from an existing course, uses text analysis techniques, graph theory, graph transformation, and a user interface to create and present graphical course maps. These course maps are able to express information not currently available in the LMS. Student agents have been developed to traverse these course maps to identify the variety of possible paths through the material. The temporal relations imposed by the current course delivery methods have been replaced by prerequisite relations that express ordering that provides educational value. Reducing the connections to these more meaningful relations allows more possibilities for change. Technical methods are used to explore and calibrate linear and nonlinear models of learning. These methods are used to track mastery of learning material and identify relative difficulty values. Several probability models are developed and used to demonstrate that data from existing, temporally based courses can be used to make predictions about student success in courses using the same material but organized without the temporal limitations. Combined, these demonstrate the possibility of tools and techniques that can support the implementation of a graphical course map that allows varied paths and provides an enriched, more informative interface between the educator

  18. DYNAMIC ANALYSIS OF UNDERGROUND COMPOSITE STRUCTURES UNDER EXPLOSION LOADING

    Institute of Scientific and Technical Information of China (English)

    赵晓兵; 薛大为; 赵玉祥

    2004-01-01

    In selecting rational types of underground structures resisting explosion, in order to improve stress states of the structural section and make full use of material strength of each part of the section, the research method of composite structures is presented. Adopting the analysis method of micro-section free body, equilibrium equations, constraint equations and deformation coordination equations are given. Making use of the concept of generalized work and directly introducing Lagrange multiplier specific in physical meaning, the validity of the constructed generalized functional is proved by using variation method. The rational rigidity matching relationship of composite structure section is presented through example calculations.

  19. Application Analysis of Strengthened Story in Frame-Core Structures

    Institute of Scientific and Technical Information of China (English)

    SU Yuan; CHEN Chuan-yao; LI Li

    2009-01-01

    Lateral deflection formulas are presented for analysis of the strengthened story applied to frame-core structures. For the frame-core structures with top outriggers and with middle outriggers, the relationship between stiffness characteristic parameters of frame and outriggers and the top drift of structures under different loads is analyzed. It is indicated that when stiffness characteristic parameter of frame is large, outrigger efficiency for top drift reduction is low, and the mutation of internal forces occurs; when the stiffness characteristic parameter of frame is less than 3, installing the strengthened story is advantageous to frame-core structures.

  20. A discourse on sensitivity analysis for discretely-modeled structures

    Science.gov (United States)

    Adelman, Howard M.; Haftka, Raphael T.

    1991-01-01

    A descriptive review is presented of the most recent methods for performing sensitivity analysis of the structural behavior of discretely-modeled systems. The methods are generally but not exclusively aimed at finite element modeled structures. Topics included are: selections of finite difference step sizes; special consideration for finite difference sensitivity of iteratively-solved response problems; first and second derivatives of static structural response; sensitivity of stresses; nonlinear static response sensitivity; eigenvalue and eigenvector sensitivities for both distinct and repeated eigenvalues; and sensitivity of transient response for both linear and nonlinear structural response.

  1. Accuracy of Dynamic and Acoustic Analysis of Lightweight Panel Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Dickow, Kristoffer Ahrens; Andersen, Lars Vabbersgaard

    2012-01-01

    in such buildings is important. In the lowfrequency range, prediction of sound and vibration in building structures may be achieved by finite-element analysis (FEA). The aim of this paper is to compare the two commercial codes ABAQUS and ANSYS for FEA of an acoustic-structural coupling in a timber lightweight panel...... structure. For this purpose, modal analyses are carried out employing a fully coupled model of sound waves within an acoustic medium and vibrations in the structural part. The study concerns the frequency range 50–250 Hz....

  2. Modeling and structural analysis of PA clan serine proteases

    Directory of Open Access Journals (Sweden)

    Laskar Aparna

    2012-05-01

    Full Text Available Abstract Background Serine proteases account for over a third of all known proteolytic enzymes; they are involved in a variety of physiological processes and are classified into clans sharing structural homology. The PA clan of endopeptidases is the most abundant and over two thirds of this clan is comprised of the S1 family of serine proteases, which bear the archetypal trypsin fold and have a catalytic triad in the order Histidine, Aspartate, Serine. These proteases have been studied in depth and many three dimensional structures have been experimentally determined. However, these structures mostly consist of bacterial and animal proteases, with a small number of plant and fungal proteases and as yet no structures have been determined for protozoa or archaea. The core structure and active site geometry of these proteases is of interest for many applications. This study investigated the structural properties of different S1 family serine proteases from a diverse range of taxa using molecular modeling techniques. Results Our predicted models from protozoa, archaea, fungi and plants were combined with the experimentally determined structures of 16 S1 family members and used for analysis of the catalytic core. Amino acid sequences were submitted to SWISS-MODEL for homology-based structure prediction or the LOOPP server for threading-based structure prediction. Predicted models were refined using INSIGHT II and SCRWL and validated against experimental structures. Investigation of secondary structures and electrostatic surface potential was performed using MOLMOL. The structural geometry of the catalytic core shows clear deviations between taxa, but the relative positions of the catalytic triad residues were conserved. Some highly conserved residues potentially contributing to the stability of the structural core were identified. Evolutionary divergence was also exhibited by large variation in secondary structure features outside the core

  3. Structural Analysis: Shape Information via Points-To Computation

    CERN Document Server

    Marron, Mark

    2012-01-01

    This paper introduces a new hybrid memory analysis, Structural Analysis, which combines an expressive shape analysis style abstract domain with efficient and simple points-to style transfer functions. Using data from empirical studies on the runtime heap structures and the programmatic idioms used in modern object-oriented languages we construct a heap analysis with the following characteristics: (1) it can express a rich set of structural, shape, and sharing properties which are not provided by a classic points-to analysis and that are useful for optimization and error detection applications (2) it uses efficient, weakly-updating, set-based transfer functions which enable the analysis to be more robust and scalable than a shape analysis and (3) it can be used as the basis for a scalable interprocedural analysis that produces precise results in practice. The analysis has been implemented for .Net bytecode and using this implementation we evaluate both the runtime cost and the precision of the results on a num...

  4. Dynamic Analysis of Partially Embedded Structures Considering Soil-Structure Interaction in Time Domain

    Directory of Open Access Journals (Sweden)

    Sanaz Mahmoudpour

    2011-01-01

    Full Text Available Analysis and design of structures subjected to arbitrary dynamic loadings especially earthquakes have been studied during past decades. In practice, the effects of soil-structure interaction on the dynamic response of structures are usually neglected. In this study, the effect of soil-structure interaction on the dynamic response of structures has been examined. The substructure method using dynamic stiffness of soil is used to analyze soil-structure system. A coupled model based on finite element method and scaled boundary finite element method is applied. Finite element method is used to analyze the structure, and scaled boundary finite element method is applied in the analysis of unbounded soil region. Due to analytical solution in the radial direction, the radiation condition is satisfied exactly. The material behavior of soil and structure is assumed to be linear. The soil region is considered as a homogeneous half-space. The analysis is performed in time domain. A computer program is prepared to analyze the soil-structure system. Comparing the results with those in literature shows the exactness and competency of the proposed method.

  5. Dynamic Analysis of Composite Structural System for Looms Industry

    Directory of Open Access Journals (Sweden)

    Jigar K. Sevalia

    2014-02-01

    Full Text Available All the structures subjected to any kind of loads or displacement tends to behave dynamically. Thus the structures are always under continuous loading. The industrial buildings have to support the machineries in motion which are under high degree of vibrations. And so the design of base and the foundations of such structures under vibrations are very important and need to be stable. Problems of dynamics of bases and foundations are to be studied carefully, so as to understand the response characteristics of the power loom industry structure. This is very important from the economic point of view as well as to secure the stability and safety of the structure; dynamic analysis was carried out for Ground + One storey industry load bearing structure using STAAD.Pro software. In this paper, an attempt has been made to study the dynamic analysis of the structure under vibrations caused by reciprocating type machines. This paper makes attempt to study the effects of various structural parameters like Beam Size, Column Size and Storey Height and Wall Thickness variation on Frequency and Displacement of the industrial building which in future will serve as guidelines to the structural engineers and the industry people.

  6. Ambient Response Analysis Modal Analysis for Large Structures

    DEFF Research Database (Denmark)

    Brincker, Rune; Andersen, Palle

    1999-01-01

    In this paper an outline is given of the basic ideas in ambient respons analysis, i.e. when modal analyses is performed on systems based on output only. Some of the most known techniques are briefly introduced, and the basic problems discussed. The introduced techniques are the frequency domain...... based peak-picking methods, the polyreference LSCE method, the stochastic subspace method for estimation of state space systems and the prediction error method for estimation of Auto-Regressive Moving Average Vector models. The techniques are illustrated on an example of ambient response measurments...

  7. RNA STRAND: The RNA Secondary Structure and Statistical Analysis Database

    Directory of Open Access Journals (Sweden)

    Andronescu Mirela

    2008-08-01

    Full Text Available Abstract Background The ability to access, search and analyse secondary structures of a large set of known RNA molecules is very important for deriving improved RNA energy models, for evaluating computational predictions of RNA secondary structures and for a better understanding of RNA folding. Currently there is no database that can easily provide these capabilities for almost all RNA molecules with known secondary structures. Results In this paper we describe RNA STRAND – the RNA secondary STRucture and statistical ANalysis Database, a curated database containing known secondary structures of any type and organism. Our new database provides a wide collection of known RNA secondary structures drawn from public databases, searchable and downloadable in a common format. Comprehensive statistical information on the secondary structures in our database is provided using the RNA Secondary Structure Analyser, a new tool we have developed to analyse RNA secondary structures. The information thus obtained is valuable for understanding to which extent and with which probability certain structural motifs can appear. We outline several ways in which the data provided in RNA STRAND can facilitate research on RNA structure, including the improvement of RNA energy models and evaluation of secondary structure prediction programs. In order to keep up-to-date with new RNA secondary structure experiments, we offer the necessary tools to add solved RNA secondary structures to our database and invite researchers to contribute to RNA STRAND. Conclusion RNA STRAND is a carefully assembled database of trusted RNA secondary structures, with easy on-line tools for searching, analyzing and downloading user selected entries, and is publicly available at http://www.rnasoft.ca/strand.

  8. RF-thermal-structural-RF coupled analysis on a travelling wave disk-loaded accelerating structure

    Institute of Scientific and Technical Information of China (English)

    PEI Shi-Lun; CHI Yun-Long; ZHANG Jing-Ru; HOU Mi; LI Xiao-Ping

    2012-01-01

    The travelling wave (TW) disk-loaded accelerating structure is one of the key components in normal conducting (NC) linear accelerators,and has been studied for many years.In the design process,usually after the dimensions of each cell and the two couplers are finalized,the structure is fabricated and tuned,and then the whole structure RF characteristics are measured by using a vector network analyzer.Before fabrication,the whole structure characteristics (including RF,thermal and structural ones) are less simulated due to the limited capability of currently available computers.In this paper,we described a method for performing RF-thermal-structural-RF coupled analysis on a TW disk-loaded structure using only one PC.In order to validate our method,we first analyzed and compared our RF simulation results on the 3 m long BEPC Ⅱ structure with the corresponding experimental results,which shows very good consistency.Finally,the RF-thermal-structure-RF coupled analysis results on the 1.35 m long NSC KIPT linac accelerating structure are presented.

  9. Structural analysis of guyed mast exposed to wind action

    Directory of Open Access Journals (Sweden)

    Pezo Milada L.

    2016-01-01

    Full Text Available The behavior of the mast is non-linear due to its slenderness and compliant guy-support system, having a tendency to lose stability and even crush suddenly. Wind load is one of the main factors affecting the stability of the structure of the mast. Structural assessment of the different mast configurations has been investigated in the past. Furthermore, European standards EN 1993-3-1:2006 and EN 1993-1-6:2007 already provides some guidelines about the basis of structural analysis of masts and towers. This paper presents the results of numerical simulations of a guyed mast exposed to wind action using finite element method. Structural analyses were performed for three different constant wind loads, modal analysis provides the values of natural frequency and mode shapes, while the stability analysis was performed for the first three buckling load factor values. The motivation for this study is to investigate the contribution of finite element method to structural analysis of a lattice structure such as guyed mast as an alternative and/or improvement to the literature and codes. [Projekat Ministarstva nauke Republike Srbije, br. TR33036

  10. Numerical Analysis of Vibrations of Structures under Moving Inertial Load

    CERN Document Server

    Bajer, Czeslaw I

    2012-01-01

    Moving inertial loads are applied to structures in civil engineering, robotics, and mechanical engineering. Some fundamental books exist, as well as thousands of research papers. Well known is the book by L. Frýba, Vibrations of Solids and Structures Under Moving Loads, which describes almost all problems concerning non-inertial loads. This book presents broad description of numerical tools successfully applied to structural dynamic analysis. Physically we deal with non-conservative systems. The discrete approach formulated with the use of the classical finite element method results in elemental matrices, which can be directly added to global structure matrices. A more general approach is carried out with the space-time finite element method. In such a case, a trajectory of the moving concentrated parameter in space and time can be simply defined. We consider structures described by pure hyperbolic differential equations such as strings and structures described by hyperbolic-parabolic differential equations ...

  11. Purification and Structural Analysis of Plectin and BPAG1e.

    Science.gov (United States)

    Manso, José A; García Rubio, Inés; Gómez-Hernández, María; Ortega, Esther; Buey, Rubén M; Carballido, Ana M; Carabias, Arturo; Alonso-García, Noelia; de Pereda, José M

    2016-01-01

    Plectin and BPAG1e belong to the plakin family of high-molecular-weight proteins that interconnect the cytoskeletal systems and anchor them to junctional complexes. Plectin and BPAG1e are prototypical plakins with a similar tripartite modular structure. The N- and C-terminal regions are built of multiple discrete structural domains, while the central rod domain mediates dimerization by coiled-coil interactions. Owing to the mosaic organization of plakins, the structure of their constituent individual domains or small multi-domain segments can be analyzed isolated. Yet, understanding the integrated function of large regions, oligomers, and heterocomplexes of plakins is difficult due to the large and segmented structure. Here, we describe methods for the production of plectin and BPAG1e samples suitable for structural and biophysical analysis. In addition, we discuss the combination of hybrid methods that yield information at several resolution levels to study the complex, multi-domain, and flexible structure of plakins.

  12. Numerical Analysis on Neutron Shielding Structure of ITER Vacuum Vessel

    Institute of Scientific and Technical Information of China (English)

    LIU Changle; WU Songtao; YU Jie; SHENG Daolin

    2008-01-01

    The neutron shielding component of ITER (International Thermonuclear Experi-mental Reactor) vacuum vessel is a kind of structure resembling a wall in appearance. A FE (finite element) model is set up by using ANSYS code in terms of its structural features. Static analysis, thermal expansion analysis and dynamic analysis are performed. The static results show that the stress and displacement distribution are allowable, but the high stress appears in the junction between the upper and lower parts. The modal analysis indicates that the biggest defor-mation exists in the port area. Through modal superposition, the single-point response has been found with the lower rank frequency of the acceleration seismic response spectrum. But the defor-mation and the stress values are within the permissible limit. The analysis results would benefit the work in the next step and provide some reference for the implementation of the engineering plan in the future.

  13. Skeleton-Sectional Structural Analysis for 3D Printing

    Institute of Scientific and Technical Information of China (English)

    Wen-Peng Xu; Wei Li; Li-Gang Liu

    2016-01-01

    3D printing has become popular and has been widely used in various applications in recent years. More and more home users have motivation to design their own models and then fabricate them using 3D printers. However, the printed objects may have some structural or stress defects as the users may be lack of knowledge on stress analysis on 3D models. In this paper, we present an approach to help users analyze a model’s structural strength while designing its shape. We adopt sectional structural analysis instead of conventional FEM (Finite Element Method) analysis which is computationally expensive. Based on sectional structural analysis, our approach imports skeletons to assist in integrating mesh designing, strength computing and mesh correction well. Skeletons can also guide sections building and load calculation for analysis. For weak regions with high stress over a threshold value in the model from analysis result, our system corrects them by scaling the corresponding bones of skeleton so as to make these regions stiff enough. A number of experiments have demonstrated the applicability and practicability of our approach.

  14. Transfinite element methodology towards a unified thermal/structural analysis

    Science.gov (United States)

    Tamma, K. K.; Railkar, S. B.

    1986-01-01

    The paper describes computational developments towards thermal/structural modeling and analysis via a generalized common numerical methodology for effectively and efficiently interfacing interdisciplinary areas. The proposed formulations use transform methods in conjunction with finite element developments for each of the heat transfer and structural disciplines, respectively, providing avenues for obtaining the structural response due to thermal effects. An alternative methodology for unified thermal/structural analysis is presented. The potential of the approach is outlined in comparison with conventional schemes and existing practices. Highlights and characteristic features of the approach are described via general formulations and applications to several problems. Results obtained demonstrate excellent agreement in comparison with analytic and/or conventional finite element schemes accurately and efficiently.

  15. Structural Analysis of the ITER VV Lower Port Region

    Institute of Scientific and Technical Information of China (English)

    CAI Yingxiang; WU Songtao; YU Jie

    2007-01-01

    A structural analysis of the International Thermonuclear Experimental Reactor (ITER)vacuum vessel's lower port region Was presented by means of a finite element analysis method.The purpose is to evaluate the stress and displacement level on this structure under various combinations of five designed loads,including the gravity of the vacuum vessel,seismic loads,electromagnetic loads,and possible pressure loads to ensure structural safety.The cyclic symmetry finite element model of this structure Was developed by using ANSYS code.The results showed that the maximum stress does not exceed the allowable value for any of the load combinations according to ASME code and the nine vacuum vessel(VV)supports have the ability to sustain the entire VV and in vessel-components and withstand load combinations under both normal as well as off-normal operation conditions.Stress mainly concentrates on the connecting region of the VV support and lower port stub extension.

  16. A Morphogenetic Design Approach with Embedded Structural Analysis

    DEFF Research Database (Denmark)

    Jensen, Mads Brath; Kirkegaard, Poul Henning; Holst, Malene Kirstine

    2010-01-01

    The present paper explores a morphogenetic design approach with embedded structural analysis for architectural design. A material system based on a combined space truss and membrane system has been derived as a growth system with inspiration from natural growth of plants. The structural system...... is capable of adding new elements based on a structural analysis of the existing components and their internal stress levels. A GA decision-making procedure that control the generation of the growth cycles is introduced. This evaluation and generation loop is capable of successfully making decisions based...... on several, and often conflicting, inputs formulated from architectural requirements. An experiment with a tri-pyramid component has been considered, but many other space truss systems could be explored in the same manner and result in highly performative outcomes. not only with respect to the structural...

  17. 基于灰色局势决策的备件品种级别配置%Application of Grey Situation Decision Approach to Determining the Assortment of Spares and Level of Repair

    Institute of Scientific and Technical Information of China (English)

    李云锋; 王瑞林; 贾云非; 长建宇

    2011-01-01

    Analyzes the significant factors which have influence on spares assortment. This paper introduce a new method of quantizing spares assortment that is grey situation decision approach. It accounts for spares assortment basis on level of repair.%分析了影响备件品种确定的主要因素,引入灰色局势决策法,解决了按维修级别进行备件品种确定的问题,提供一种新的备件品种量化方法.

  18. Earthquake resistant structural design of house JUBHome using simplified analysis

    OpenAIRE

    Lenarčič, Matej

    2016-01-01

    In this thesis we have designed steel reinforcement for a structure using JUBhome system, on the basis of simplified analysis. Design of the structure was carried out according to standards and guidelines for earthquake resistant design of foundations and reinforced concrete walls. In the first part of thesis we have introduced earthquake loads, guidelines for earthquake resistant design and controls, which have to be fulfilled, when using foundation system JUBHome BASE and wall JUBHome WALL....

  19. Structural Analysis of Bacillus subtilis Spore Peptidoglycan During Sporulation

    OpenAIRE

    2000-01-01

    Structural analysis of Bacillus subtilis spore peptidoglycan during sporulation:Jennifer L. Meador-Parton:David L. Popham, Chairman:Department of Biology:(ABSTRACT):Bacterial spore peptidoglycan (PG) is very loosely cross-linked relative to vegetative PG. Theories suggest that loosely cross-linked spore PG may have a flexibility which contributes to the attainment of spore core dehydration. The structure of the PG found in fully dormant spores has previously been examined in wild type and m...

  20. Protein secondary structure analysis with a coarse-grained model

    OpenAIRE

    Kneller, Gerald R.; Hinsen, Konrad

    2014-01-01

    The paper presents a geometrical model for protein secondary structure analysis which uses only the positions of the $C_{\\alpha}$-atoms. We construct a space curve connecting these positions by piecewise polynomial interpolation and describe the folding of the protein backbone by a succession of screw motions linking the Frenet frames at consecutive $C_{\\alpha}$-positions. Using the ASTRAL subset of the SCOPe data base of protein structures, we derive thresholds for the screw parameters of se...

  1. An Approach to Structural Approximation Analysis by Artificial Neural Networks

    Institute of Scientific and Technical Information of China (English)

    陆金桂; 周济; 王浩; 陈新度; 余俊; 肖世德

    1994-01-01

    This paper theoretically proves that a three-layer neural network can be applied to implementing exactly the function between the stresses and displacements and the design variables of any elastic structure based on the Kolmogorov’s mapping neural network existence theorem. A new approach to the structural approximation analysis with the global characteristic based on artificial neural networks is presented. The computer simulation experiments made by this paper show that the new approach is effective.

  2. Efficient explicit formulation for practical fuzzy structural analysis

    Indian Academy of Sciences (India)

    A S Balu; B N Rao

    2011-08-01

    This paper presents a practical approach based on High Dimensional Model Representation (HDMR) for analysing the response of structures with fuzzy parameters. The proposed methodology involves integrated finite element modelling, HDMR based response surface generation, and explicit fuzzy analysis procedures. The uncertainties in the material, geometric, loading and structural parameters are represented using fuzzy sets. To facilitate efficient computation, a HDMR based response surface generation is employed for the approximation of the fuzzy finite element response quantity.

  3. Better Finite-Element Analysis of Composite Shell Structures

    Science.gov (United States)

    Clarke, Gregory

    2007-01-01

    A computer program implements a finite-element-based method of predicting the deformations of thin aerospace structures made of isotropic materials or anisotropic fiber-reinforced composite materials. The technique and corresponding software are applicable to thin shell structures in general and are particularly useful for analysis of thin beamlike members having open cross-sections (e.g. I-beams and C-channels) in which significant warping can occur.

  4. Identification of similar regions of protein structures using integrated sequence and structure analysis tools

    Directory of Open Access Journals (Sweden)

    Heiland Randy

    2006-03-01

    Full Text Available Abstract Background Understanding protein function from its structure is a challenging problem. Sequence based approaches for finding homology have broad use for annotation of both structure and function. 3D structural information of protein domains and their interactions provide a complementary view to structure function relationships to sequence information. We have developed a web site http://www.sblest.org/ and an API of web services that enables users to submit protein structures and identify statistically significant neighbors and the underlying structural environments that make that match using a suite of sequence and structure analysis tools. To do this, we have integrated S-BLEST, PSI-BLAST and HMMer based superfamily predictions to give a unique integrated view to prediction of SCOP superfamilies, EC number, and GO term, as well as identification of the protein structural environments that are associated with that prediction. Additionally, we have extended UCSF Chimera and PyMOL to support our web services, so that users can characterize their own proteins of interest. Results Users are able to submit their own queries or use a structure already in the PDB. Currently the databases that a user can query include the popular structural datasets ASTRAL 40 v1.69, ASTRAL 95 v1.69, CLUSTER50, CLUSTER70 and CLUSTER90 and PDBSELECT25. The results can be downloaded directly from the site and include function prediction, analysis of the most conserved environments and automated annotation of query proteins. These results reflect both the hits found with PSI-BLAST, HMMer and with S-BLEST. We have evaluated how well annotation transfer can be performed on SCOP ID's, Gene Ontology (GO ID's and EC Numbers. The method is very efficient and totally automated, generally taking around fifteen minutes for a 400 residue protein. Conclusion With structural genomics initiatives determining structures with little, if any, functional characterization

  5. Application Effect Analyses of Computer Cotton Assorting System%计算机配棉系统的应用效果分析

    Institute of Scientific and Technical Information of China (English)

    丁忠平; 袁安民

    2011-01-01

    Cotton assorting and prediction yarn quality effect by computer cotton assorting system was analyzed. Functions of computer cotton assorting system were introduced. Micronaire value and fiber length were selected as the first case,micronaire value,fiber length and fiber uniform were selected as the second case,cotton assorting and spinning test were done in the two cases. The result shows that the error between prediction data of the first case and practical data are larger. While the error between prediction data of the second case and practical data are less, the yam quality can fit use demands. It is considered that better yarn quality prediction result can be got when cotton bales classification of computer cotton assorting system can be set rationally according to raw material. Prediction result of computer cotton assorting system can be more accurate when equipment, processing etc are considered comprehensively.%分析计算机配棉系统配棉及预测成纱质量的效果.介绍了计算机配棉系统的功能,分别选取马克隆值和长度(方案1)及马克隆值、长度和纤维整齐度(方案2)为参数进行配棉及纺纱试验.试验结果表明:方案1的预测理论数据与实际生产数据误差较大,而方案2的误差明显减小,生产出的成纱质量符合使用要求.认为:根据原料情况合理设置计算机配棉系统的棉包分类分组方能取得理想的成纱质量预测结果,如能综合考虑设备、工艺等因素,计算机配棉系统的预测结果会更加精确.

  6. Analysis of gallstone composition and structure in Jharkhand region.

    Science.gov (United States)

    Sharma, Rajani; Soy, Snehi; Kumar, Chandan; Sachan, Shashwati Ghosh; Sharma, Shubha Rani

    2015-01-01

    The aim of this study was to analyze gallstones structurally and chemically as this may help to direct the measures for its treatment. On the basis of morphology, 459 gallstones were categorized into pigmented, cholesterol, and mixed gallstones and analyzed for their chemical structure and composition. Elementary analysis was done with the help of inductively coupled plasma, optical emission spectrophotometry. Fourier transform infrared spectroscopy was used for compound analysis. The effects of thermal stability were analyzed by thermal gravimetric analysis (TGA). Statistical analysis was done to correlate gallstone composition with their shape and number in gallbladder. Pigmented gallstones were predominant and generally occurred in multiple forms, cholesterol as solitaire and black pigmented as slug (χ (2) = 3.56; p gallstones while pigmented gallstones were more compact in structure. Both types of structure were seen in mixed stones while black pigmented stones were amorphous in nature. This difference in structures might be due to difference in chemical compositions. Cholesterol and mixed stones contained basically cholesterol, brown pigmented constituted bilirubin as a major component, and black stones differed from brown pigmented stones by the presence of Ca palmitate. Bilirubin and palmitate were thermally more stable than cholesterol; hence pigmented gallstones were thermally more stable than cholesterol gallstones, as seen in TGA study. Pigmented gallstones were most common in this study of gallstones from the Jharkhand region.

  7. Reliability analysis of ship structure system with multi-defects

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    This paper analyzes the influence of multi-defects including the initial distortions,welding residual stresses,cracks and local dents on the ultimate strength of the plate element,and has worked out expressions of reliability calculation and sensitivity analysis of the plate element.Reliability analysis is made for the system with multi-defects plate elements.Failure mechanism,failure paths and the calculating approach to global reliability index are also worked out.After plate elements with multi-defects fail,the formula of reverse node forces which affect the residual structure is deduced,so are the sensitivity expressions of the system reliability index.This ensures calculating accuracy and rationality for reliability analysis,and makes it convenient to find weakness plate elements which affect the reliability of the structure system.Finally,for the validity of the approach proposed,we take the numerical example of a ship cabin to compare and contrast the reliability and the sensitivity analysis of the structure system with multi-defects with those of the structure system with no defects.The approach has implications for the structure design,rational maintenance and renewing strategy.

  8. Finite element analysis of structures through unified formulation

    CERN Document Server

    Carrera, Erasmo; Petrolo, Marco; Zappino, Enrico

    2014-01-01

    The finite element method (FEM) is a computational tool widely used to design and analyse  complex structures. Currently, there are a number of different approaches to analysis using the FEM that vary according to the type of structure being analysed: beams and plates may use 1D or 2D approaches, shells and solids 2D or 3D approaches, and methods that work for one structure are typically not optimized to work for another. Finite Element Analysis of Structures Through Unified Formulation deals with the FEM used for the analysis of the mechanics of structures in the case of linear elasticity. The novelty of this book is that the finite elements (FEs) are formulated on the basis of a class of theories of structures known as the Carrera Unified Formulation (CUF). It formulates 1D, 2D and 3D FEs on the basis of the same ''fundamental nucleus'' that comes from geometrical relations and Hooke''s law, and presents both 1D and 2D refined FEs that only have displacement variables as in 3D elements. It also covers 1D...

  9. Tools for integrated sequence-structure analysis with UCSF Chimera

    Directory of Open Access Journals (Sweden)

    Huang Conrad C

    2006-07-01

    Full Text Available Abstract Background Comparing related structures and viewing the structures in the context of sequence alignments are important tasks in protein structure-function research. While many programs exist for individual aspects of such work, there is a need for interactive visualization tools that: (a provide a deep integration of sequence and structure, far beyond mapping where a sequence region falls in the structure and vice versa; (b facilitate changing data of one type based on the other (for example, using only sequence-conserved residues to match structures, or adjusting a sequence alignment based on spatial fit; (c can be used with a researcher's own data, including arbitrary sequence alignments and annotations, closely or distantly related sets of proteins, etc.; and (d interoperate with each other and with a full complement of molecular graphics features. We describe enhancements to UCSF Chimera to achieve these goals. Results The molecular graphics program UCSF Chimera includes a suite of tools for interactive analyses of sequences and structures. Structures automatically associate with sequences in imported alignments, allowing many kinds of crosstalk. A novel method is provided to superimpose structures in the absence of a pre-existing sequence alignment. The method uses both sequence and secondary structure, and can match even structures with very low sequence identity. Another tool constructs structure-based sequence alignments from superpositions of two or more proteins. Chimera is designed to be extensible, and mechanisms for incorporating user-specific data without Chimera code development are also provided. Conclusion The tools described here apply to many problems involving comparison and analysis of protein structures and their sequences. Chimera includes complete documentation and is intended for use by a wide range of scientists, not just those in the computational disciplines. UCSF Chimera is free for non-commercial use and is

  10. 2-D Finite Element Analysis of Massive RC Structures

    DEFF Research Database (Denmark)

    Saabye Ottosen, Niels

    1982-01-01

    Nonlinear analysis of concrete structures using finite elements is discussed. The applications include a thick-walled top-closure for a pressure vessel as well as the delicate problems of beams failing in shear. The top-closure analysis evaluates the effect of two different failure criteria...... and modeling of a realistic post-failure behavior is demonstrated to be mandatory for accurate structural predictions. For shear beams it is shown that the primary cause of failure is strain softening adjacent to the load point....

  11. SEISMIC RANDOM VIBRATION ANALYSIS OF LOCALLY NONLINEAR STRUCTURES

    Institute of Scientific and Technical Information of China (English)

    ZhaoYan; LinJiahao; ZhangYahui; AnWei

    2003-01-01

    A nonlinear seismic analysis method for complex frame structures subjected to stationary random ground excitations is proposed. The nonlinear elasto-plastic behaviors may take place only on a small part of the structure. The Bouc-Wen differential equation model is used to model the hysteretic characteristics of the nonlinear components. The Pseudo Excitation Method (PEM) is used in solving the linearized random differential equations to replace the solution of the less efficient Lyapunov equation. Numerical results of a real bridge show that .the method proposed is effective for practical engineering analysis.

  12. Analysis of structural hot-spot stress in orthotropic plates

    Institute of Scientific and Technical Information of China (English)

    Chen Ce; Ji Bohai; Xu Hanjiang

    2012-01-01

    On the basis of the actual steel deck structure of Taizhou Bridge, this paper carries out hot-spot stress analysis on some key spots by using the finite element model which simulates local structure of orthotropic steel bridge decks. A finite element model is established for local structure of orthotropic steel bridge decks, and in the analysis of linear elasticity of the structure, face load is employed to simulate the loads from vehicle wheels. Analysis results show that main stresses are relatively heavy at the joints between diaphragm plates, top plates and U-shaped ribs and the joints between diaphragm plates and U-shaped ribs. These joints shall be regarded as key points for hot-spot stress analysis. Different mesh densities are adopted in the finite element model and the main stresses at different hot spots are contrasted and linear extrapolation is carried out using extrapolation formulae. Results show that different mesh densities have different influences on the hot-spot stresses at the welded seams of U-shaped ribs. These influences shall be considered in calculation and analysis.

  13. Optimal fatigue analysis of structures during complex loadings

    Directory of Open Access Journals (Sweden)

    Karaouni Habib

    2016-01-01

    Full Text Available A new framework for high cycle fatigue analysis of metallic structures under complex multi-parameter loadings was here developed. This allows to reduce the analysis on a 2-D window with a characterized one-parameter cyclic loading thanks to an equivalence rule relative to damage between any two loadings. The simplified inelastic analysis introduced by J. Zarka [J. Zarka et al. 1990. A new approach in inelastic analysis of structures. CADLM] was used to find the limit state of the structure. A new design rules for fatigue analysis by utilizing automatic learning systems was successfully performed. A database was built by coupling numerical simulations and experimental results on several welded specimens which are considered as a general structure in the proposed approach. This could be possible by the introduction of an intelligent description of a general fatigue case based on the actual theories and models. A software, FATPRO [M.I. Systems, FatPro, available at http://www.mzintsys.com/our_products_fatpro.html], based on this work has been developed at MZ Intelligent Systems.

  14. Random Time Dependent Resistance Analysis on Reinforced Concrete Structures

    Institute of Scientific and Technical Information of China (English)

    GUAN Chang-sheng; WU Ling

    2002-01-01

    The analysis method on random time dependence of reinforced concrete material is introduced,the effect mechanism on reinforced concrete are discussed, and the random time dependence resistance of reinforced concrete is studied. Furthermore, the corrosion of steel bar in reinforced concrete structures is analyzed. A practical statistical method of evaluating the random time dependent resistance, which includes material, structural size and calculation influence, is also established. In addition, an example of predicting random time dependent resistance of reinforced concrete structural element is given.

  15. Analysis of the spiral structure in a simulated galaxy

    CERN Document Server

    Mata-Chávez, Dolores; Puerari, Ivânio

    2014-01-01

    We analyze the spiral structure that results in a numerical simulation of a galactic disk with stellar and gaseous components evolving in a potential that includes an axisymmetric halo and bulge. We perform a second simulation without the gas component to observe how it affects the spiral structure in the disk. To quantify this, we use a Fourier analysis and obtain values for the pitch angle and the velocity of the self-excited spiral pattern of the disk. The results show a tighter spiral in the simulation with gaseous component. The spiral structure is consistent with a superposition of waves, each with a constant pattern velocity in given radial ranges.

  16. Structural parameter identifiability analysis for dynamic reaction networks

    DEFF Research Database (Denmark)

    Davidescu, Florin Paul; Jørgensen, Sten Bay

    2008-01-01

    . The proposed analysis is performed in two phases. The first phase determines the structurally identifiable reaction rates based on reaction network stoichiometry. The second phase assesses the structural parameter identifiability of the specific kinetic rate expressions using a generating series expansion...... method based on Lie derivatives. The proposed systematic two phase methodology is illustrated on a mass action based model for an enzymatically catalyzed reaction pathway network where only a limited set of variables is measured. The methodology clearly pinpoints the structurally identifiable parameters...

  17. NRT Rotor Structural / Aeroelastic Analysis for the Preliminary Design Review

    Energy Technology Data Exchange (ETDEWEB)

    Ennis, Brandon Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Paquette, Joshua A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-10-01

    This document describes the initial structural design for the National Rotor Testbed blade as presented during the preliminary design review at Sandia National Laboratories on October 28- 29, 2015. The document summarizes the structural and aeroelastic requirements placed on the NRT rotor for satisfactory deployment at the DOE/SNL SWiFT experimental facility to produce high-quality datasets for wind turbine model validation. The method and result of the NRT blade structural optimization is also presented within this report, along with analysis of its satisfaction of the design requirements.

  18. An Analysis of the Service Structure of China Post

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The environment of the postal industry in China has experienced tremendous changes in the past few years. The environmental changes have some effects on the elements that decide the service structure of China Post. In such context, the current service structure of China Post needs some improvements to adapt itself to the changing environment. Aiming at the optimization of the service structure of China Post, this paper reviews the law of its development and makes an analysis of its current characteristics and the existing problems.

  19. STUDIES REGARDING THE STATIC ANALYSIS OF TRUSS STRUCTURES

    Directory of Open Access Journals (Sweden)

    URDEA Mihaela

    2017-05-01

    Full Text Available This paper refers to linear static analysis of truss and beams structures modelled in SolidWorks. In SolidWorks truss and frame elements are available only for staticstudies. For illustration it was modelled and studied the behaviour of a support of pipe. The truss is a welded structure modelled with Weldment Structural Members and it is often found in industrial constructions. During this study, there have been investigated the following FEA steps: Pre-Processing, Processing and Post-Processing.The results of this study are images corresponding to Axial Stress and The Maximum Displacement in different situations.

  20. Computational analysis of RNA structures with chemical probing data.

    Science.gov (United States)

    Ge, Ping; Zhang, Shaojie

    2015-06-01

    RNAs play various roles, not only as the genetic codes to synthesize proteins, but also as the direct participants of biological functions determined by their underlying high-order structures. Although many computational methods have been proposed for analyzing RNA structures, their accuracy and efficiency are limited, especially when applied to the large RNAs and the genome-wide data sets. Recently, advances in parallel sequencing and high-throughput chemical probing technologies have prompted the development of numerous new algorithms, which can incorporate the auxiliary structural information obtained from those experiments. Their potential has been revealed by the secondary structure prediction of ribosomal RNAs and the genome-wide ncRNA function annotation. In this review, the existing probing-directed computational methods for RNA secondary and tertiary structure analysis are discussed.