Final priority; Technical Assistance on State Data Collection--IDEA Data Management Center. Final priority.

Science.gov (United States)

2014-08-05

The Assistant Secretary for the Office of Special Education and Rehabilitative Services (OSERS) announces a priority under the Technical Assistance on State Data Collection program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to fund a cooperative agreement to establish and operate an IDEA Data Management Center (Center) that will provide technical assistance (TA) to improve the capacity of States to meet the data collection requirements of the Individuals with Disabilities Education Act (IDEA).

Enresa's Participation in the Technical Assistance Programmes to the Eastern European Countries

International Nuclear Information System (INIS)

Beceiro, A. R.; Vico, E.

2000-01-01

This article briefly describes the participation of ENRESA in the technical assistance programmes to the Central and Eastern European countries (PHARE) and to the New Independent States (TACIS) as well as in the co-operation programmes all of them established by the European Commission. It is worth to point out the active role of ENRESA within the European Consortium CASSIOPEE, formed in 1993 by the six radioactive waste management companies in existence in the European Union at that time. CASSIOPEE was created to assist the European Commission in the area of radioactive waste management of the PHARE and TACIS technical assistance programmes. (Author)

Emergency notification and assistance technical operations manual. Emergency preparedness and response. Date effective: 1 February 2007

International Nuclear Information System (INIS)

2007-01-01

The Convention on Early Notification of a Nuclear Accident (the 'Early Notification Convention') and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (the 'Assistance Convention') are the prime legal instruments that establish an international framework to facilitate the exchange of information and the prompt provision of assistance in the event of a nuclear or radiological emergency, with the aim of minimizing the consequences. The International Atomic Energy Agency has specific functions assigned to it under these Conventions, to which, in addition to a large number of States, the World Health Organization (WHO), the World Meteorological Organization (WMO) and the Food and Agriculture Organization of the United Nations (FAO) are full parties. The arrangements provided between the IAEA, States that are IAEA Member States and/or Parties to one or both Conventions, all other relevant international intergovernmental organizations, and other States for facilitating the implementation of these Conventions - specifically concerning those articles that are operational in nature - are documented in the Emergency Notification and Assistance Technical Operations Manual (ENATOM). ENATOM was first issued on 18 January 1989. Member States, Parties to the Early Notification and Assistance Conventions, relevant international organizations and other States have since then regularly received updates to the manual. In 2000, a complete revision of ENATOM was reissued as EPR-ENATOM (2000) to reflect technological developments, changes in operational concepts, views on standards in the area of emergency preparedness and response, and Member States' expectations. Since then ENATOM has been reviewed and reissued biennially in line with the review cycle of the Joint Radiation Emergency Management Plan of the International Organizations (the 'Joint Plan'). Since the last edition of ENATOM in 2004, several factors have warranted some modifications to

Building, Maintaining, and Ending Relationships: An Urban School District and a Technical Assistance Team. Documentation and Technical Assistance in Urban Schools.

Science.gov (United States)

Holmes, Manford L.

This paper describes the nature of the relationships developed between the technical assistance team of the Documentation and Technical Assistance (DTA) Project and members of a Chicago (Illinois) school district staff with whom the DTA worked. First, the methodology with which the technical assistance work was studied is described, as is the…

IAEA technical co-operation with least developed Member States. Special evaluation

International Nuclear Information System (INIS)

1993-01-01

The main purposes of this evaluation were to: Review the overall situation with regard to IAEA technical co-operation with least developed Member States, including specific conditions in nuclear-related activities prevailing in these countries, approaches and practices used by the IAEA in providing assistance to LDCs, and the main results of the co-operation in question. Identify any adjustments to technical co-operation with LDC Member States that may strengthen this activity

34 CFR 300.119 - Technical assistance and training activities.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Technical assistance and training activities. 300.119... Technical assistance and training activities. Each SEA must carry out activities to ensure that teachers and....114; and (b) Are provided with technical assistance and training necessary to assist them in this...

Technical Assistance Needs Assessments (TANAs)

Science.gov (United States)

The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

Independent technical review of the Hanford Tank Farm Operations

International Nuclear Information System (INIS)

1992-07-01

The Independent Technical Assessment of the Hanford Tank Farm Operations was commissioned by the Assistant Secretary for Environmental Restoration and Waste Management on November 1, 1991. The Independent Technical Assessment team conducted on-site interviews and inspections during the following periods: November 18 to 22,1991; April 13 to 17; and April 27 to May 1, 1992. Westinghouse Hanford Company is the management and operating contractor for the Department of Energy at the Hanford site. The Hanford Tank Farm Operations consists of 177 underground storage tanks containing 61 million gallons of high-level radioactive mixed wastes from the chemical reprocessing of nuclear fuel. The Tank Farm Operations also includes associated transfer lines, ancillary equipment, and instrumentation. The Independent Technical Assessment of the Hanford Tank Farm Operations builds upon the prior assessments of the Hanford Waste Vitrification System and the Hanford Site Tank Waste Disposal Strategy.The objective of this technical assessment was to determine whether an integrated and sound program exists to manage the tank-waste storage and tankfarm operations consistent with the Assistant Secretary for Environmental Restoration and Waste Management's guidance of overall risk minimization. The scope of this review includes the organization, management, operation, planning, facilities, and mitigation of the safety-concerns of the Hanford Tank Waste Remediation System. The assessments presented in the body of this report are based on the detailed observations discussed in the appendices. When the assessments use the term ''Hanford'' as an organizational body it means DOE-RL and Westinghouse Hanford Company as a minimum, and in many instances all of the stake holders for the Hanford site

Technical Assistance Contractor management plan. Revision 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) as the prime contractor and three teaming partner subcontractors: Roy F. Weston, Inc. (RFW), AGRA Earth and Environmental, Inc. (AGRA), and Geraghty and Miller, Inc. (G and M). The TAC contract`s scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both Surface and Ground Water Projects. The TAC team supports the DOE in completing surface remedial action and initiating ground water remediation work for start-up, characterization, compliance planning, design, construction oversight, and remedial operations. The TAC provides the DOE UMTRA Project Team with a dedicated management, scientific, and technical resource base in Albuquerque, New Mexico, which is supplemented by corporate resources. A carefully developed and maintained staff of technical experts is available to assess, analyze, develop, and execute cost-effective solutions to the demanding technical and institutional problems presented by the UMTRA Project.

Sources of technical assistance

International Nuclear Information System (INIS)

Laue, H.J.

1977-01-01

This paper shows examples of technical assistance programmes within bilateral cooperation agreements between the Federal Republic of Germany and a number of developing countries of very different characteristics and summarizes the possibilities of technical assistance granted by international organizations, such as IAEA, UNDP, etc. A basic requirement for a successful transfer of technology is a high knowledge level of the indigenous scientists and engineers. Therefore, programmes for training and education and for information exchange are presented. Based on these, the means and methods of planning, performance and quality assurance are explained by practical examples and are related to the progress achieved in the use of nuclear energy and in establishing a national industry in the developing countries. (orig.) [de

Assistant Personal Robot (APR: Conception and Application of a Tele-Operated Assisted Living Robot

Directory of Open Access Journals (Sweden)

Eduard Clotet

2016-04-01

Full Text Available This paper presents the technical description, mechanical design, electronic components, software implementation and possible applications of a tele-operated mobile robot designed as an assisted living tool. This robotic concept has been named Assistant Personal Robot (or APR for short and has been designed as a remotely telecontrolled robotic platform built to provide social and assistive services to elderly people and those with impaired mobility. The APR features a fast high-mobility motion system adapted for tele-operation in plain indoor areas, which incorporates a high-priority collision avoidance procedure. This paper presents the mechanical architecture, electrical fundaments and software implementation required in order to develop the main functionalities of an assistive robot. The APR uses a tablet in order to implement the basic peer-to-peer videoconference and tele-operation control combined with a tactile graphic user interface. The paper also presents the development of some applications proposed in the framework of an assisted living robot.

7 CFR 1580.302 - Technical assistance and services.

Science.gov (United States)

2010-01-01

... producers written confirmation of all technical assistance meetings. Producers shall also have access to technical information provided in writing and electronically. (d) Producers shall also be provided... 7 Agriculture 10 2010-01-01 2010-01-01 false Technical assistance and services. 1580.302 Section...

10 CFR 440.23 - Oversight, training, and technical assistance.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Oversight, training, and technical assistance. 440.23... PERSONS § 440.23 Oversight, training, and technical assistance. (a) The Secretary and the appropriate..., directly or indirectly, training and technical assistance to any grantee or subgrantee. Such training and...

Superfund Technical Assistance Grants

Data.gov (United States)

U.S. Environmental Protection Agency — This asset includes data related to the Superfund Technical Assistance Grant program, including grant number, award amounts, award dates, period of performance,...

The Agency's Technical Co-operation activities in 1984. Report by the Director General

International Nuclear Information System (INIS)

1985-08-01

The year 1984 can be described as one during which efforts were made to increase momentum in the development co-operation between the Agency and its Member States while continuing to improve the quality of the technical assistance rendered. For the first time, the adjusted programme exceeded $50 million. During the year, changes were introduced in the administration of the programme in line with recommendations endorsed by the Board in 1983 at the end of its first technical co-operation policy review. In 1984, when the new technical co-operation policies were applied, there were three principal aims. First, the flow of Technical Assistance and Co-operation Fund resources was to be improved; by decreasing accumulated unobligated balances, an optimum level of resource utilization was to be attained by 1986. Second, procedures for the procurement of goods and services were to be streamlined in order to permit substantial increases in programme delivery. Third, systematic project evaluation was to lead to a number of specific actions that would increase the effectiveness of the Agency's development assistance. With regard to the first aim, implementation increased by 44% over the 1983 level, passing the $30 million mark in October and reaching $36.6 million by the end of the year. Of this amount, $31.8 million related to the implementation of activities programmed for 1984. Therefore, an increase in total resources of only 4% was accompanied by an increase in current-year implementation of 34%. As a result, the upward trend in the unobligated balance was checked, and earmarkings against the TACF actually decreased. The implementation rate against the TACF rose from 58% in 1983 to 65% in 1984, reaching the level that had been set as a target. If this performance can be maintained in 1985, it will be possible to reach the optimum level of TACF resource utilization one year earlier than originally expected. As regards the second aim, streamlined procedures introduced in

22 CFR 120.22 - Technical assistance agreement.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Technical assistance agreement. 120.22 Section... DEFINITIONS § 120.22 Technical assistance agreement. An agreement (e.g., contract) for the performance of a... license to manufacture defense articles. Assembly of defense articles is included under this section...

34 CFR 366.11 - What financial assistance does the Secretary provide for training and technical assistance?

Science.gov (United States)

2010-07-01

... for training and technical assistance? 366.11 Section 366.11 Education Regulations of the Offices of..., DEPARTMENT OF EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.11 What financial assistance does the Secretary provide for training and technical assistance? (a) From funds, if...

34 CFR 366.10 - What agencies are eligible for assistance to provide training and technical assistance?

Science.gov (United States)

2010-07-01

... training and technical assistance? 366.10 Section 366.10 Education Regulations of the Offices of the... EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.10 What agencies are eligible for assistance to provide training and technical assistance? Entities that have experience in the...

The Effect of Technical Assistance on Involvement and Use: The Case of a Research, Evaluation, and Technical Assistance Project

Science.gov (United States)

Roseland, Denise; Volkov, Boris B.; Callow-Heusser, Catherine

2011-01-01

In contrast to typical National Science Foundation program evaluations, the Utah State Math Science Partnership-Research, Evaluation and Technical Assistance Project (MSP-RETA) provided technical assistance (TA) in two forms: direct TA for up to 10 projects a year, and professional development sessions for a larger number of project staff. Not…

Technical assistance contractor management plan: Surface and ground water

International Nuclear Information System (INIS)

1994-09-01

This report presents the general management structure of the Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. This team is a partnership of four major private subcontractors, which teamed together, are striving to be the leader in environmental restoration of uranium mining and milling operations. It will provide a pool of experts in various aspects of the technologies necessary to accomplish this goal, available to DOE to deal with mission concerns. The report expands on goals from TAC's mission statement, which include management concerns, environment, safety, and health, quality, technical support, communications, and personnel

Technical assistance contractor management plan: Surface and ground water

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

This report presents the general management structure of the Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. This team is a partnership of four major private subcontractors, which teamed together, are striving to be the leader in environmental restoration of uranium mining and milling operations. It will provide a pool of experts in various aspects of the technologies necessary to accomplish this goal, available to DOE to deal with mission concerns. The report expands on goals from TAC`s mission statement, which include management concerns, environment, safety, and health, quality, technical support, communications, and personnel.

76 FR 6810 - Announcement of Funding Awards for the Special Needs Assistance Programs-Technical Assistance...

Science.gov (United States)

2011-02-08

... Awards for the Special Needs Assistance Programs--Technical Assistance (SNAPS--TA) Fiscal Year 2010... funding awards for HUD'S Fiscal Year 2010 Special Needs Assistance Programs--Technical Assistance (SNAPS... Department in a competition for funding under the Notice of Funding Availability (NOFA) for the Special Needs...

19 CFR 213.4 - Disclosure of receipt of technical assistance.

Science.gov (United States)

2010-04-01

....4 Section 213.4 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE TRADE REMEDY ASSISTANCE § 213.4 Disclosure of receipt of technical assistance. An... received technical assistance from the Trade Remedy Assistance Office in any resulting petition, complaint...

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy

DEFF Research Database (Denmark)

Gjeraa, Kirsten; Mundt, Anna S.; Spanager, Lene

2017-01-01

Background Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived...... with complementary and overlapping scopes of practice between surgical and anesthesia subteams. Conclusions This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important...... by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. Methods This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data...

International technical assistance example. Consortium action in Bulgaria

International Nuclear Information System (INIS)

Mattei, J.M.; Milhem, J.L.

1993-03-01

The safety status achieved last year at the Kozloduy Nuclear Power Plant (NPP) and the capability of the Bulgarian Nuclear Safety Authority (BNSA) to assess the safety of the plant and the adequacy of proposed improvements have been matters of international concern. However, the Kozloduy NPP contributes 35-40 per cent of the electrical generating capacity in Bulgaria. For further operation of the plants, it is therefore, essential that safety is improved. In july 1991, the Commission of the European Communities (CEC) instituted a Six Months Emergency Action Programme for Bulgaria under the PHARE regional nuclear safety programme. The programme consisted of three parts: - an industrial emergency programme supporting the utility of the Kozloduy NPP, - a study to evaluate Bulgaria's electricity needs, - technical assistance for reinforcement of the Bulgarian Nuclear Safety Authority. For the third part, complementary to the industrial emergency programme carried out by the WANO (World Association of Nuclear Operators), a Consortium of expert institutions and regulatory from EC member states was established by CEC for assistance to BNSA. The Consortium consisted of: - Institut de Protection et de Surete Nucleaire (IPSN), France, technical support of the French regulatory body, - Gesellschaft fur Anlagen und Reaktorsicherheit (GRS) mbH, Germany, an organization in safety engineering, technical support of governmental regulatory body, - AIB-Vincotte Nuclear (AVN), Belgium, the organization authorized by the Belgian Government for licensing and inspection of nuclear power plants, - UK Atomic Energy Authority (AEA Technology), an independent UK Government owned nuclear R and D and consultancy organization, - Nuclear Installations Inspectorate (NII) of the Health and Safety Executive, United Kingdom, the nuclear regulatory body for the United Kingdom

Emergency notification and assistance technical operations manual. Emergency preparedness and response. Date effective: 1 December 2002

International Nuclear Information System (INIS)

2002-11-01

The Convention on Early Notification of a Nuclear Accident (the 'Early Notification Convention') and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (the 'Assistance Convention') are the prime legal instruments that establish an international framework to facilitate the exchange of information and the prompt provision of assistance in the event of a nuclear accident or radiological emergency, with the aim of minimizing their consequences. The International Atomic Energy Agency (IAEA) has specific functions assigned to it under these Conventions, to which, in addition to a large number of States (Section 1.7), the World Health Organization (WHO), the World Meteorological Organization (WMO) and the Food and Agriculture Organization of the United Nations (FAO) are full parties. The arrangements between the IAEA, States that are IAEA Member States and/or Parties to one or both Conventions, all other relevant international intergovernmental organizations, and other States for facilitating the implementation of these Conventions specifically concerning those articles that are operational in nature - are documented in the Emergency Notification and Assistance Technical Operations Manual (ENATOM). In 2000, a complete revision of ENATOM, with all relevant sections updated, withdrawn or replaced with new material, was reissued as EPR-ENATOM (2000) to reflect new technological developments, operational concepts, views on standards in the area of emergency preparedness and response, and Member States' expectations. A separate publication, EPR-JPLAN (2000), the Joint Radiation Emergency Management Plan of the International Organizations (Joint Plan'), described a common understanding of how each of six co-sponsoring international organizations will act during a response and in making preparedness arrangements. It is intended that the ENATOM is reviewed and reissued biennially in line with the review cycle of the Joint Plan. Since the

Emergency notification and assistance technical operations manual. Emergency preparedness and response. Date effective: 1 December 2000

International Nuclear Information System (INIS)

2000-11-01

The Convention on Early Notification of a Nuclear Accident (the 'Early Notification Convention') and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (the 'Assistance Convention') are the prime legal instruments that establish an international framework to facilitate the exchange of information and the prompt provision of assistance in the event of a nuclear accident or radiological emergency, with the aim of minimizing the consequences. The International Atomic Energy Agency (IAEA) has specific functions assigned to it under these Conventions, to which the World Health Organization (WHO), the World Meteorological Organization (WMO) and the Food and Agriculture Organization of the United Nations (FAO) are full parties. Since 1989, the arrangements between the IAEA, States which are IAEA Member States and/or Parties to one or both Conventions, all other relevant international intergovernmental organizations, and other States for facilitating the implementation of the Conventions - specifically of those of their articles which are operational in nature have been documented in the Emergency Notification and Assistance Technical Operations Manual (ENATOM). Recent events, for example, the launch of the Cassini satellite (USA, 1997), the Acerinox accident (Spain, 1998), the JCO criticality accident (Japan, 1999), the Istanbul accident (Turkey, 1999) and the Samut Prakarn accident (Thailand, 2000), have raised new issues and highlighted the expectation of States that the IAEA will use the framework of the Early Notification and Assistance Conventions to obtain and provide real-time emergency related information on such events. While the Early Notification Convention requires States Parties to report only accidents that may have significant transboundary radiological consequences, States may under the Assistance Convention legitimately request the assistance of the IAEA or an Accident State in obtaining information concerning a

75 FR 13521 - Centers for Independent Living Program-Training and Technical Assistance

Science.gov (United States)

2010-03-22

... DEPARTMENT OF EDUCATION Centers for Independent Living Program--Training and Technical Assistance... for Independent Living Program--Training and Technical Assistance (CIL-TA program). The Assistant... appropriated for the CIL program to provide training and technical assistance to CILs, agencies eligible to...

The Agency's Technical Co-operation programme with Algeria, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With $3.6 million of Agency support received, Algeria ranks 41st among all recipients of technical assistance in the period 1958-1991. Seventy per cent of the assistance received during the past ten years has been in the form of equipment, followed by expert services (17%) and training (13%). Almost all of the resources were provided by the Technical Assistance and Co-operation Fund (97%), the remaining 3% were made available through assistance in kind. With regard to project disbursement by sector, the three major areas have been nuclear physics and chemistry (28%), agriculture (27%) and nuclear medicine (20%)

40 CFR 35.4005 - What is a Technical Assistance Grant?

Science.gov (United States)

2010-07-01

... public participation in decision making at eligible sites. A TAG allows your group to procure independent... Technical Assistance Grant? A Technical Assistance Grant (TAG) provides money for your group to obtain... how a technical advisor can help your group include, but are not limited to: (a) Reviewing preliminary...

The Agency's Technical Co-operation programme with Niger, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With some $1.5 million of Agency support received, Niger ranks 65th among all recipients of technical assistance in the period 1958 through 1991. About two-thirds of the assistance received during the past ten years has been provided in the form of equipment (62%), complemented by expert services (26%) and training (12%). Almost the entire resources utilized were provided by the Technical Assistance and Co-operation Fund (96%), with only a small share made available through assistance in kind (4%). With regard to project disbursements by sector, the four major areas have been agriculture (34%), general atomic energy development (31%), hydrology (18%) and nuclear safety (12%)

RF Regional Technical Centers for MPC and A Sustainability Operations

International Nuclear Information System (INIS)

Lambert, L D; Toth, W J; Hendrickson, S

2004-01-01

The National Nuclear Security Administration (NNSA) programmatic vision to be a catalyst in Russia's assumption of responsibility for long-term system operation is exemplified in the sustainability cooperation with the RF Ministry of Defense (MOD). An identified goal for the MPC and A Program is to encourage the development of Russian Federation (RF) capabilities and commitments to operate and maintain safeguard improvements. The RF MOD Technical Support Center development fulfills the NNSA mission and MPC and A Program goal. The regional technical center concept involves a systematic approach to aid in the determination of the level of sustainability assistance required to transition operators, maintenance, training, and testing of MPC and A systems to the RF MOD. This paper describes the process used to create the RF MOD Technical support center. First are described the needs analyses conducted to determine the key system sustainability factors requiring support. These sustainability functions are then compiled to influence the form and ultimate physical design of the technical support center. Operational interfaces are described, in detail that show the benefit of the center to the individual sites. Finally, benefits relating to information accessibility and other economies of scale are described that highlight the central center concept's strengths

76 FR 7870 - Agency Information Collection Activities: Cybersecurity and Communications Technical Assistance...

Science.gov (United States)

2011-02-11

...: Technical Assistance Request and Evaluation. Form: DHS Form 9042, DHS Form 9043. OMB Number: 1670-NEW... technical assistance requests from each State and territory. The Technical Assistance Evaluation Form is... will be submitted electronically. Evaluation forms may be submitted electronically or in paper form...

32 CFR 203.12 - Technical assistance for public participation provider qualifications.

Science.gov (United States)

2010-07-01

... waste problems. (2) Experience in making technical presentations. (3) Demonstrated writing skills. (4... 32 National Defense 2 2010-07-01 2010-07-01 false Technical assistance for public participation... THE SECRETARY OF DEFENSE (CONTINUED) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP...

The Agency's Technical Co-operation activities in 1986. Report by the Director General

International Nuclear Information System (INIS)

1987-08-01

During 1986, a total of 854 projects were operational and 71 training courses were held. These activities involved 1930 expert assignments. In addition, 937 persons received training under the fellowship programme. Performance indicators (non-financial) are given in Part II of this report (Sections B and C) in order to provide some impression of the increase in implementation actions related to the delivery of a growing programme. Although total resources were higher in 1986 than in previous years, the overall growth rate declined further while new obligations and disbursements increased steeply. The near-stagnation in the net expenditure rate for Technical Assistance and Co-operation Fund (TACF) resources which occurred in 1985 prompted close monitoring and follow-up measures in 1986. These actions led to an all-time high TACF net expenditure rate, namely 75.7%, in 1986. As the TACF represented 71% of all technical co-operation resources, overall programme performance in terms of net expenditure reached 67.6%, which is also the highest rate ever recorded. TACF resources increased by 11%. Pledges and miscellaneous income covered 92.7% of the target. The percentage attainment of the target has been declining since 1983. As actual disbursements against the TACF increased at a much higher rate than new resources, the unobligated balance decreased to the extent that striving for even higher net expenditure rates would no longer be consistent with judicious resource management. The share of extrabudgetary funds in the programme declined: they accounted for 14.5% of the resources and 12.6% of the disbursements in 1986. The Federal Republic of Germany became the largest contributor of extrabudgetary funds. Special attention will be given to the utilization of these resources so that delivery rates can be improved. As anticipated, UNDP's share in resources and disbursements increased and several new large-scale projects were approved. In-kind assistance continued to play a

Endoscopic-assisted interhemispheric parieto-occipital transtentorial approach for microsurgical resection of a pineal region tumor: operative video and technical nuances.

Science.gov (United States)

Liu, James K

2016-01-01

The angle of the straight sinus and tentorium cerebelli can often influence the choice of surgical approach to the pineal region. The supracerebellar infratentorial approach can be technically challenging and a relative contraindication in cases where the angle of the straight sinus and tentorium is very steep. Similarly, an occipital transtentorial approach, which uses a low occipital craniotomy at the junction of the superior sagittal sinus and transverse sinus, may not provide the best trajectory to the pineal region in patients with a steep tentorium. In addition, this approach often necessitates retraction on the occipital lobe to access the tentorial incisura and pineal region, which can increase the risk of visual compromise. In this operative video, the author demonstrates an alternative route using an endoscopic-assisted interhemispheric parieto-occipital transtentorial approach to a pineal region tumor in a patient with a steep straight sinus and tentorium. The approach provided a shorter route and more direct trajectory to the tumor at the tentorial incisura, and avoided direct fixed retraction on the occipital lobe when performed using the lateral position, thereby minimizing visual complications. This video atlas demonstrates the operative technique and surgical nuances, including the application of endoscopic-assisted microsurgical resection and operative pearls for preservation of the deep cerebral veins. In summary, the parieto-occipital transtentorial approach with endoscopic assistance is an important approach in the armamentarium for surgical management of pineal region tumors. The video can be found here: https://youtu.be/Ph4veG14aTk .

The Agency's Technical Co-operation programme with Ethiopia, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With some $2.5 million of Agency support received, Ethiopia ranks 54th among all recipients of technical assistance in the period 1958 through 1991. More than half of the assistance received during the past ten years has been provided in the form of equipment (55%), complemented by expert services (16%) and training (29%). The best part of the resources was provided by the Technical Assistance and Co-operation Fund (88%), the remainder was made available through assistance in kind (6%), UNDP and extrabudgetary contributions (3% each). During the past ten years, project disbursements went to four major areas: agriculture (45%), nuclear medicine (35%), nuclear safety (14%) and nuclear engineering and technology (6%)

The Agency's Technical Co-operation programme with Uganda, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With $1.6 million of Agency support received, Uganda ranks 61st among all recipients of technical assistance in the period 1958 through 1991. Almost half of the assistance received during the past ten years has been provided in the form of equipment (47%), complemented by a strong training component (37%), while expert services have received only a relatively small share (16%). Ninety-eight per cent of the resources were provided by the Technical Assistance and Co-operation Fund, the remaining two per cent were made available through assistance in kind. During the past ten years, project activities - and disbursements - have concentrated exclusively on three major areas: agriculture (64%), nuclear medicine (24%) and nuclear safety (12%)

The Agency's Technical Co-operation programme with Cameroon, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With $1.3 million of Agency support received, Cameroon ranks 68th among all recipients of technical assistance in the period 1958 through 1991. More than half of the assistance received during the past ten years has been provided in the form of equipment (61%), followed by expert services (24%) and training (15%). The best part of the resources were provided by the Technical Assistance and Co-operation Fund (90%); the remaining ten per cent were made available through extrabudgetary contributions (8%) and assistance in kind (2%). With regard to project disbursements by sector, the four major areas have been nuclear physics and chemistry (38%), agriculture (23%), nuclear medicine (14%) and hydrology (13%)

Solar Technical Assistance Team 2013 Webinars | State, Local, and Tribal

Science.gov (United States)

Governments | NREL 3 Webinars Solar Technical Assistance Team 2013 Webinars The Solar Technical Assistance Team (STAT) 2013 webinar series provides an overview of solar technologies, resources, and the following sessions are available: Solar Finance for Residential and Commercial Customers and Potential Roles

The Agency's Technical Co-operation programme with Brazil, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $17 million of Agency support received, Brazil ranks 2nd among all recipients of technical assistance during the period 1958 through 1991. Over half of the assistance received during the past ten years has been provided in the form of equipment (51%), complemented by expert services (34%) and training (15%). Almost two-thirds of the funds were made available through the Technical Assistance and Co-operation Fund (63%), the rest was provided through extrabudgetary contributions (30%), assistance in kind (4%) and UNDP (3%). With regard to total disbursements - by sector - under those projects that were operational during the period 1982 through November 1992, the three major areas have been: general atomic energy development (47%), nuclear safety (22%) and agriculture (13%). During the same period, the country has provided experts and training course lectures for a total of 405 assignments, and has hosted 178 fellowships and scientific visits as well as 46 regional and interregional training events with a total of 603 participants

The Agency's Technical Co-operation activities in 1987. Report by the Director General

International Nuclear Information System (INIS)

1988-08-01

This report is part of a wide range of documentation which the Agency provides to Member States on its technical co-operation activities at various times during the year. It is, in particular, complemented by the achievement reporting submitted to the Technical Assistance and Co-operation Committee of the Board in the annual implementation reports that give the status of the technical co-operation programmes as at 30 September in each year. Following the 1986 Technical Co-operation Seminar and based on continuing consultations with Member States various steps to improve the quality of the programme were taken in 1987: for example, new project request forms and management plans were introduced and preparatory assistance was expanded. Office automation was intensified and the computerized data base covering technical co-operation was enhanced further. Work continues on the adaptation of data provided by the new Financial Information and Control System (FIGS) to the needs of the technical co-operation programmes and vice-versa. While several problems have still to be overcome, it has on the whole, been possible in this report to re-establish data comparability with previous years. Evaluation has become an integral part of the Agency's technical cooperation activities. In addition to on-going mid-project and end-of-project evaluations, expert services and fellowships were evaluated in 1987 and the first country programme evaluation was also undertaken. During 1987, a total of 962 projects were operational and 64 training courses were held. These activities involved 1808 expert assignments while 1975 persons received training abroad. Of the provisions in the 1987 total adjusted programme, one half was earmarked for equipment, while the other half was equally divided between ear markings for experts and for training. Of the Agency's technical co-operation resources in 1987, 72.5% came from the Technical Assistance and Co-operation Fund, 13.7% from extra budgetary

The Agency's Technical Co-operation programme with Guatemala, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $3 million of Agency support received, Guatemala ranks 46th among all recipients of technical assistance in the period 1958 - 1991. Almost three quarters of the assistance during the past ten years has been provided in the form of equipment (72%), followed by training (15%) and expert services (13%). Seventy-eight per cent of the resources were provided by the Technical Assistance and Co-operation Fund, the rest was made available through extrabudgetary contributions (21%) and assistance in kind (1%). With regard to project disbursement by sector, the largest areas have been nuclear physics and chemistry (37%), agriculture (28%), nuclear medicine (16%) and hydrology (8%). The remaining 11% were shared by general atomic energy development, nuclear raw materials, nuclear engineering and technology, and nuclear safety

The Agency's Technical Co-operation programme with Uruguay, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $4.2 million of Agency support received, Uruguay ranks 37th among all recipients of technical assistance in the period 1958 - 1991. More than half of the assistance during the past ten years has been provided in the form of equipment (67%), followed by expert services (19%) and training (14%). Seventy-three per cent of the resources were provided through the Technical Assistance and Co-operation Fund, while 24% were made available through extrabudgetary contributions. The remaining 3% were provided through assistance in kind, with only an insignificant contribution by UNDP. With regard to project disbursement by sector, the largest areas have been nuclear medicine (35%), agriculture (23%), general atomic energy development (17%), followed by nuclear physics and chemistry (11%) and industry and hydrology (7%)

The Agency's Technical Co-operation programme with Mali, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $2.7 million of Agency support received, Mali ranks 51st among all recipients of technical assistance in the period 1958 through 1991. More than half of the assistance during the past ten years has been provided in the form of equipment (58%), followed by expert services (27%) and training (15%). With a share of 93%, the Technical Assistance and Co-operation Fund has provided the best part of the resources, while only very small shares were made available through extrabudgetary contributions and assistance in kind (5% and 2%, respectively). With regard to project disbursements during the past ten years, by sector, the four major areas have been hydrology (31%), nuclear medicine (24%), agriculture (21%) and nuclear raw materials (16%)

The Agency's Technical Co-operation programme with Zambia, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With $5.5 million of Agency support received, Zambia ranks 33rd among all recipients of technical assistance in the period 1958 through 1991. More than half of the assistance during the past ten years has been provided in the form of equipment (61%), followed by expert services (25%) and training (14%). Almost all of the resources made available came from the Technical Assistance and Co-operation Fund (93%), with only very small shares provided through extrabudgetary contributions (4%) and assistance in kind (3%). With regard to project disbursements during the past ten years, by sector, the largest areas have been agriculture (33%) and general atomic energy development (23%), followed by industry and hydrology (19%), nuclear raw materials (13%) and nuclear safety (6%)

The Agency's Technical Co-operation programme with Senegal, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With $2.2 million of Agency support received, Senegal ranks 56th among all recipients of technical assistance in the period 1958 - 1991. More than one-third of the assistance during the past ten years has been provided in the form of equipment (67%), followed by expert services (21%) and training (12%). Eighty per cent of the resources were provided by the Technical Assistance and Co-operation Fund, while 16% were made available by UNDP and about 2% each through extrabudgetary contributions and assistance in kind. With regard to project disbursement by sector, by far the largest area has been agriculture (43%). Smaller shares have gone to general atomic energy development (15%), nuclear physics and chemistry (13%), nuclear medicine and hydrology (11% each), and nuclear safety (7%)

77 FR 47501 - Applications for New Awards; Technical Assistance on State Data Collection, Analysis, and...

Science.gov (United States)

2012-08-08

... Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical... for New Awards; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA... Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on...

TADS: Technical Assistance Development System.

Science.gov (United States)

Epting, Rosemary, Ed.

Described is the Technical Assistance Development System (TADS), a component of the Frank Porter Graham Child Development Center of the University of North Carolina at Chapel Hill which offers support services to preschool demonstration centers for handicapped children in the First Chance Network. Discussed are the four types of services offered:…

The Agency's Technical Co-operation programme with Sierra Leone, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $1.1 million of Agency support received, Sierra Leone ranks 70th among all recipients of technical assistance in the period 1958 through 1991. Almost equal shares of the assistance during the past ten years have been provided in the form of equipment (40%) and expert services (37%), while the share of the training component was 23%. The best part of the resources was provided by the Technical Assistance and Co-operation Fund (96%), the remaining 4% was made available through assistance in kind. During the past ten years, project activities - and disbursements - have concentrated exclusively on three major areas: nuclear medicine (52%), general atomic energy development (25%) and agriculture (23%)

The international cooperation year - Technical assistance through IAEA

International Nuclear Information System (INIS)

1965-01-01

In 1964, sixty-two countries benefited from the Agency's technical assistance programme, which involved an actual expenditure of more than 3 million dollars (including some payments against obligations incurred in previous years). This represents an increase of 29 percent over the amount of $2,423,000. spent in 1963. In addition to funds provided from the Agency's own resources and from the United Nations Expanded Programme of Technical Assistance, many gifts in kind - equipment, fellowships, and expert services - were supplied through the Agency, to a value of $708,000

5 CFR 340.203 - Technical assistance.

Science.gov (United States)

2010-01-01

... part-time employment practices; (3) Development of special recruitment and selection techniques for...-TIME CAREER EMPLOYMENT (PART-TIME, SEASONAL, ON-CALL, AND INTERMITTENT) Regulatory Requirements-Part-Time Employment § 340.203 Technical assistance. (a) The Office of Personnel Management shall provide...

The Agency's Technical Co-operation programme with Mexico, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With almost $7.7 million of Agency support received, Mexico ranks 21st among all recipients of technical assistance during the period 1958 through 1991. The largest share of the assistance received during the past ten years has been in the form of expert services (36%), followed by equipment and training (27% each) and sub-contracts (10%). Almost two-thirds of the funds available were provided by the Technical Assistance and Co-operation Fund (65%), the rest was made available through extrabudgetary contributions (21%) and assistance in kind (14%). With regard to project disbursements during the past ten years, by sector the five major areas have been nuclear safety (34%), nuclear engineering and technology (27%), agriculture (17%), nuclear physics and chemistry (9%), and nuclear techniques in industry and hydrology (9%)

The Agency's Technical Co-operation programme with Zaire, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With $3.9 million of Agency support received, Zaire ranks 38th among all recipients of technical assistance in the period 1958 through 1991. More than half of the assistance during the past ten years has been provided in the form of equipment (60%), followed by training (24%) and expert services (16%). With a share of 76%, the Technical Assistance and Co-operation Fund has provided more than three quarters of the total resources available, while only small shares were made available through UNDP (11%), extrabudgetary contributions (4%) and assistance in kind (9%). With regard to project disbursements during the past ten years, by sector, the largest area has been general atomic energy development (26%), followed by agriculture (18%), nuclear safety (18%), nuclear techniques in industry and hydrology (13%), and nuclear physics and chemistry (11%)

The Agency's Technical Co-operation programme with Nigeria, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $9.3 million of Agency support received, Nigeria ranks 14th among all recipients of technical assistance in the period 1958 through 1991. During the past ten years, 44% of this assistance has been provided in the form of equipment, followed by training (27%), expert services (26%) and sub-contracts (3%). With 45% and 44%, respectively, the Technical Assistance and Co-operation Fund and extrabudgetary contributions hold almost equal shares in the total resources made available, while in-kind assistance accounts for 9% and UNDP for 2% of the resources. With regard to project disbursement during the past ten years, by sector, by far the largest area has been agriculture (70%), with significantly smaller shares going to nuclear physics and chemistry (11%), nuclear medicine (8%) and nuclear safety (7%)

78 FR 16447 - Rehabilitation Continuing Education Program (RCEP) for the Technical Assistance and Continuing...

Science.gov (United States)

2013-03-15

... (RCEP) for the Technical Assistance and Continuing Education Centers (TACE Centers); Proposed Extension... (RCEP) for the Technical Assistance and Continuing Education Centers (TACE Centers), the Secretary... with disabilities through enhanced technical assistance (TA) and continuing education (CE) for State...

International Economic Association on organization of co-operative production and development of equipment and providing technical assistance in construction of nuclear power plants - ''INTERATOMENERGO''

International Nuclear Information System (INIS)

Mal'tsev, N.D.

1979-01-01

History is stated of foundation of the International Economic Association ''Interatomenergo''. Structure is given of the Association and the list of main problems to be solved by it. Project is given of the programm of co-operation in the field of scientific and technical works as well as of design and projecting works in creation of new types of equipment for nuclear power plants, in particular, creation of serial power units with improved WWER-1000 reactor. Directions are stated of activity of the Association in the field of providing assistance in construction and exploitation of nuclear power plants as well as in training of operational personnel [ru

77 FR 47495 - Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting-National...

Science.gov (United States)

2012-08-08

... Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical... 34 CFR Chapter III [CFDA Number 84.373Z] Final Priority; Technical Assistance on State Data Collection, Analysis, and Reporting--National IDEA Technical Assistance Center on Early Childhood...

50-year of the Technical Assistance Service to Industry (SATI): notes from a heterodoxy

International Nuclear Information System (INIS)

Enriquez, Santiago N.

2011-01-01

This report is in honor of the 50° creation anniversary of the Service of Technical Assistance to Industry (SATI),a service with no background in Argentina. This occasion is appropriate to think the historical conditions which made possible the existence of the SATI in the National Atomic Energy Commission. Secondly, this report describes its operative characteristics and its achievements in different fields: from the technical and industry-learning aspects, up to the development of the conception about the relation between Science, Technology and Society. (author) [es

Functional Vision Observation. Technical Assistance Paper.

Science.gov (United States)

Florida State Dept. of Education, Tallahassee. Bureau of Education for Exceptional Students.

Technical assistance is provided concerning documentation of functional vision loss for Florida students with visual impairments. The functional vision observation should obtain enough information for determination of special service eligibility. The observation is designed to supplement information on the medical eye examination, and is conducted…

The Agency's technical co-operation activities in 1985. Report by the Director General

International Nuclear Information System (INIS)

1986-08-01

Although total resources and disbursements were higher in 1985 than in previous years, the growth rates for both declined somewhat. New resources for the Technical Assistance and Co-operation Fund (TACF) increased by 13%, the TACF accounting for over 66% of all technical co-operation resources in 1985. Pledges made towards the 1985 target for voluntary contributions to the TACF came close to 90% of the target. Although a significant loss on exchange had to be absorbed by the Fund, 96.9% of the target was covered thanks to additional income. Although extrabudgetary resources declined in 1985, they still accounted for one fifth of all technical assistance resources. There was a significant increase in in-kind contributions; this was attributable to the support for non-destructive testing training in Latin America given by Canada, which was the second largest donor of in-kind assistance after the United States. UNDP resources rose very slightly. With UNDP's new five-year programming cycle beginning in 1987, there may be further increases if new projects are identified and timely action taken. New information on implementation expressed as net expenditure and net expenditure rates has been introduced in the form of Expenditure Summaries I, II and III, which provide a more precise picture of performance by fund, geographic area, programme component, field of activity and technical Division. Net expenditure against all funds stood at 57.9%. Net expenditure against the TACF was 66.3%. As UNDP resources and funds in trust account for relatively small shares of the programme, their utilization does not influence the overall net expenditure rate significantly. However, the slow utilization of extrabudgetary resources did have an adverse effect on programme performance as a whole. Net expenditures from the TACF continued to increase at a higher rate than resources, so that the unobligated balance declined for the second consecutive year. In the past, the growing unobligated

Report of the Office of Nuclear Reactor Regulation technical assistance task force

International Nuclear Information System (INIS)

1981-11-01

In 1981, the Director of the Office of Nuclear Reactor Regulation (NRR) of the Nuclear Regulatory Commission (NRC) chartered a task force to assess the office program of technical assistance and to recommend improvements. The task force divided the technical assistance program into four areas, and the practices in each area were assessed through a series of surveys of staff, management, and contractor personnel. The task force placed emphasis in its interview and assessment process on the problem areas that exist in the technical assistance program. The report thus reflects a weight on the faults found as a result of the inquiries made. The four major areas of technical assistance contracting studied were program planning, program management and execution, program control and management information systems, and program administration and coordination

The Agency's Technical Co-operation programme with Cote d'Ivoire, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $1.7 million of Agency support received, Cote d'Ivoire ranks 60th among all recipients of technical assistance in the period 1958 through 1991. Over half of the assistance received during the past ten years has been in the form of equipment (59%), complemented by expert services (26%) and training (15%). The best part of the resources was provided by the Technical Assistance and Co-operation Fund (91%), the remainder was made available through extrabudgetary contributions (7%) and through assistance in kind (2%). During the past ten years, project activities - and disbursements - have concentrated exclusively on three major areas: agriculture (59%), general atomic energy development (30%) and nuclear safety (11%)

The Agency's Technical Co-operation programme with Kenya, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With almost $3.9 million of Agency support received, Kenya ranks 39th among all recipients of technical assistance during the period 1958-1991. Almost half of the assistance during the past ten years has been provided in the form of the equipment (44%), followed by training (33%) and expert services (23%). Two-thirds of the funds available were provided by the Technical Assistance and Co-operation Fund (66%), while extra-budgetary contributions accounted for 18%, in-kind contributions for 14%, and UNDP for 2% of the resources. With regard to project disbursements during the past ten years, by sector, the four major areas have been general atomic energy development (30%), agriculture (22%), nuclear medicine and nuclear safety (13% each)

Program of technical assistance to the Organization for the Prohibition of Chemical Weapons - lessons learned from the U.S. program of technical assistance to IAEA safeguards. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

The Defense Nuclear Agency is sponsoring a technical study of the requirements of a vehicle to meet the OPCW`s future needs for enhanced chemical weapons verification capabilities. This report provides information about the proven mechanisms by which the U.S. provided both short- and long-term assistance to the IAEA to enhance its verification capabilities. Much of the technical assistance has generic application to international organizations verifying compliance with disarmament treaties or conventions. In addition, some of the equipment developed by the U.S. under the existing arrangements can be applied in the verification of other disarmament treaties or conventions. U.S. technical assistance to IAEA safeguards outside of the IAEA`s regular budget proved to be necessary. The U.S. technical assistance was successful in improving the effectiveness of IAEA safeguards for its most urgent responsibilities and in providing the technical elements for increased IAEA {open_quotes}readiness{close_quotes} for the postponed responsibilities deemed important for U.S. policy objectives. Much of the technical assistance was directed to generic subjects and helped to achieve a system of international verification. It is expected that the capabilities of the Organization for the Prohibition of Chemical Weapons (OPCW) to verify a state`s compliance with the {open_quotes}Chemical Weapons Convention{close_quotes} will require improvements. This report presents 18 important lessons learned from the experience of the IAEA and the U.S. Program of Technical Assistance to IAEA Safeguards (POTAS), organized into three tiers. Each lesson is presented in the report in the context of the difficulty, need and history in which the lesson was learned. Only the most important points are recapitulated in this executive summary.

Final priority; technical assistance to improve state data capacity--National Technical Assistance Center to improve state capacity to accurately collect and report IDEA data. Final priority.

Science.gov (United States)

2013-05-20

The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State Data Capacity program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2013 and later years. We take this action to focus attention on an identified national need to provide technical assistance (TA) to States to improve their capacity to meet the data collection and reporting requirements of the Individuals with Disabilities Education Act (IDEA). We intend this priority to establish a TA center to improve State capacity to accurately collect and report IDEA data (Data Center).

Security and emergency management technical assistance for the top 50 transit agencies

Science.gov (United States)

2007-04-01

Between May 2002 and July 2006, the Federal Transit Administration (FTA) provided technical assistance to the top 50 transit agencies through the Security and Emergency Management Technical Assistance Program (SEMTAP). The scope and purpose of the pr...

The Agency's Technical Co-operation programme with Costa Rica, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $2.8 million of Agency support received, Costa Rica ranks 49th among all recipients of technical assistance in the period 1958-1991. Over half of the assistance during the past ten years has been provided in the form of equipment (52%), followed by expert services (37%) and training (11%). Sixty-two per cent of the resources were made available through the Technical Assistance and Co-operation Fund, while 37% of the resources were provided by UNDP. The rest was made available through extrabudgetary contributions (5%) and through in-kind assistance (1%). With regard to project disbursement by sector, the largest areas have been nuclear raw materials (36%), nuclear physics and chemistry (24%) and agriculture (20%). Smaller shares have gone to hydrology (11%) and nuclear medicine (8%)

The Agency's Technical Co-operation programme with Madagascar, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $3.5 million of Agency support received, Madagascar ranks 42nd among all recipients of technical assistance in the period 1958 through 1991. More than half of the assistance during the past ten years has been provided in the form of equipment (55%), followed by expert services (32%) and training (13%). With a share of 69%, the Technical Assistance and Co-operation Fund has provided more than two-thirds of the total resources available, while 29% were made available through UNDP and 2% through assistance in kind. Extrabudgetary contributions accounted for less than one per cent. With regard to project disbursements during the past ten years, by sector, by far the largest area has been nuclear raw materials (66%), followed by nuclear physics and chemistry (18%). Only small shares have gone to nuclear safety (7%), agriculture (5%) and nuclear engineering and technology (4%)

The Agency's Technical Co-operation programme with Cuba, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With almost $8.2 million of Agency support received, Cuba ranks 19th among all recipients of technical assistance in the period 1958 - 1991, whereby it ranked as high as 3rd in 1982 and 4th in 1984. Over three quarters of the assistance during the past ten years has been provided in the form of equipment (81%), followed by expert services (10%) and training (9%). Seventy-one per cent of the resources were made available through the Technical Assistance and Co-operation Fund, while 28% of the resources were provided by UNDP. The remaining 1% was made available through extrabudgetary and in-kind contributions. With regard to project disbursements by sector, the largest areas have been general atomic energy development (36%), agriculture (20%), nuclear physics and chemistry (10%) and nuclear safety (10%). Industry and hydrology, nuclear engineering and technology, and nuclear medicine have each received less than ten per cent of the assistance provided

The Agency's Technical Co-operation programme with Ghana, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $6.5 million of Agency support received, Ghana ranks 29th among all recipients of technical assistance in the period 1958 - 1991. More than half of the assistance during the past ten years has been provided in the form of equipment (53%), followed by training through fellowships and scientific visits (34%) and expert services (13%). Seventy-four per cent of the resources were provided by the Technical Assistance and Co-operation Fund, 13% through assistance in kind, 11% through extrabudgetary contributions, and 2% by UNDP. It should be noted that the share for extrabudgetary contributions includes an amount of $250,000 made available by the Ghanaian Government for the purchase of equipment by the Agency under a funds-in-trust arrangement. With regard to project disbursement by sector, the largest share has gone to agriculture (36%), followed by nuclear physics and chemistry (21%), nuclear medicine (16%), industry and hydrology (14%) and nuclear engineering and technology (9%)

77 FR 46658 - Proposed Priority; Technical Assistance To Improve State Data Capacity-National Technical...

Science.gov (United States)

2012-08-06

... Assistance To Improve State Data Capacity--National Technical Assistance Center To Improve State Capacity To... and later years. We take this action to focus attention on an identified national need to provide TA to improve the capacity of States to meet the data collection requirements of the Individuals with...

Technical assistance efforts at EG and G Idaho, Inc

Energy Technology Data Exchange (ETDEWEB)

Engen, I.A.; Toth, W.J.

1981-01-01

As part of DOE's geothermal outreach program, EG and G Idaho has been funded since 1977 to provide technical information and assistance to parties interested in the direct applications of geothermal energy. In this time information has been provided to over 1000 requestors and technical assistance and analyses have been supplied to over 250 parties interested in developing geothermal resources. Many of the latter efforts are leading to direct-use projects that use geothermal resources to replace fossil fuels. A few of the more promising projects are discussed.

The provision of technical assistance by the Agency with special reference to 1971. Report by the Director General

International Nuclear Information System (INIS)

1972-07-01

Following its usual practice, the Board of Governors has requested the communication to the General Conference of the material it used in reviewing the provision of technical assistance by the Agency, with special reference to 1971; this material is accordingly reproduced in the present document. The review was carried out pursuant to paragraph 20 of the Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. 2. The use of the resources placed at the Agency's disposal, in the form of voluntary contributions, gifts in kind, UNDP(SF) and UNDP(TA) funds, for the provision of technical assistance is reviewed in this document; data on UNDP(SF) assistance in respect of projects for which the IAEA was the executing agent have been incorporated in the statistical tables and figures for the first time. This has been done to establish a broader basis for comparison of the data that will be included in the report to be submitted one year hence, in which special reference will be made to the technical assistance provided by the Agency in 1972, which will reflect the full integration of the Special Fund and Technical Assistance components of UNDP, In addition, information is given with regard to the UNDP(SF) projects for which the Agency served as sub-contractor in 1971 in Annex III. 3. The three principal elements of the technical assistance provided are expert services, equipment and fellowships. The main objectives of the assistance are to promote the transfer of skills and knowledge relating to the peaceful uses of atomic energy, to support the efforts made by recipient countries to carry out their atomic energy activities more efficiently, and to ensure that the knowledge acquired can continue to be applied after Agency projects have been completed. The achievement of the latter objective, however, depends largely on the ability of Governments to make adequate facilities available and to recruit and retain the requisite

The provision of technical assistance by the Agency with special reference to 1971. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

1972-07-15

Following its usual practice, the Board of Governors has requested the communication to the General Conference of the material it used in reviewing the provision of technical assistance by the Agency, with special reference to 1971; this material is accordingly reproduced in the present document. The review was carried out pursuant to paragraph 20 of the Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. 2. The use of the resources placed at the Agency's disposal, in the form of voluntary contributions, gifts in kind, UNDP(SF) and UNDP(TA) funds, for the provision of technical assistance is reviewed in this document; data on UNDP(SF) assistance in respect of projects for which the IAEA was the executing agent have been incorporated in the statistical tables and figures for the first time. This has been done to establish a broader basis for comparison of the data that will be included in the report to be submitted one year hence, in which special reference will be made to the technical assistance provided by the Agency in 1972, which will reflect the full integration of the Special Fund and Technical Assistance components of UNDP, In addition, information is given with regard to the UNDP(SF) projects for which the Agency served as sub-contractor in 1971 in Annex III. 3. The three principal elements of the technical assistance provided are expert services, equipment and fellowships. The main objectives of the assistance are to promote the transfer of skills and knowledge relating to the peaceful uses of atomic energy, to support the efforts made by recipient countries to carry out their atomic energy activities more efficiently, and to ensure that the knowledge acquired can continue to be applied after Agency projects have been completed. The achievement of the latter objective, however, depends largely on the ability of Governments to make adequate facilities available and to recruit and retain the requisite

Important Non-Technical Skills in Video-Assisted Thoracoscopic Surgery Lobectomy: Team Perspectives.

Science.gov (United States)

Gjeraa, Kirsten; Mundt, Anna S; Spanager, Lene; Hansen, Henrik J; Konge, Lars; Petersen, René H; Østergaard, Doris

2017-07-01

Safety in the operating room is dependent on the team's non-technical skills. The importance of non-technical skills appears to be different for minimally invasive surgery as compared with open surgery. The aim of this study was to identify which non-technical skills are perceived by team members to be most important for patient safety, in the setting of video-assisted thoracoscopic surgery (VATS) lobectomy. This was an explorative, semistructured interview-based study with 21 participants from all four thoracic surgery centers in Denmark that perform VATS lobectomy. Data analysis was deductive, and directed content analysis was used to code the text into the Oxford Non-Technical Skills system for evaluating operating teams' non-technical skills. The most important non-technical skills described by the VATS teams were planning and preparation, situation awareness, problem solving, leadership, risk assessment, and teamwork. These non-technical skills enabled the team to achieve shared mental models, which in turn facilitated their efforts to anticipate next steps. This was viewed as important by the participants as they saw VATS lobectomy as a high-risk procedure with complementary and overlapping scopes of practice between surgical and anesthesia subteams. This study identified six non-technical skills that serve as the foundation for shared mental models of the patient, the current situation, and team resources. These findings contribute three important additions to the shared mental model construct: planning and preparation, risk assessment, and leadership. Shared mental models are crucial for patient safety because they enable VATS teams to anticipate problems through adaptive patterns of both implicit and explicit coordination. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Problems of technical cooperation

International Nuclear Information System (INIS)

Noramli, M.

1987-01-01

The main principles of the IAEA technical co-operation program, which intends to answer the requirements of the member states as regards technical assistance, are presented. IAEA offers its assistance in the supervision and financial support of the projects, which promise direct and quick profit to the member states. Projects related to the satisfaction of the main demands of humanity, industrial use, energy generation, radiation protection and other fields, which can promote the contribution of nuclear power generation to the course of peace, protection of health and thriving of states, are among them. 35 million dollars (USA) was allocated for the IAEA technical assistance and realization of the co-operation program in 1987

25 CFR 1200.44 - What action will the Department take on requests for technical assistance?

Science.gov (United States)

2010-04-01

... technical assistance? 1200.44 Section 1200.44 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF THE INTERIOR AMERICAN INDIAN TRUST FUND MANAGEMENT REFORM ACT Technical Assistance § 1200.44 What action will the Department take on requests for technical assistance? We will respond in writing...

10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Grant application submittals for technical assistance and... Grant application submittals for technical assistance and energy conservation measures. (a) Each... assistance for energy conservation measures, including renewable resource measures, shall include the...

Technical assistance and the transfer of remote sensing technology. [for economic development

Science.gov (United States)

Chipman, R.

1977-01-01

The transfer of technology from industrialized countries to the third world is a very complicated process and one that requires a great deal of research and development. The political and social obstacles to this transfer are generally greater than the technical obstacles, but technical assistance programs have neither the competence nor the inclination to deal with these factors adequately. Funding for technical assistance in remote sensing is now expanding rapidly, and there is a growing need for institutions to study and promote the effective use of this technology for economic development. The United Nations, the Food and Agriculture Organization, the World Bank, the United States Agency for International Development and the Canadian technical assistance agencies take different approaches to the problem and deal with the political pressures in different ways.

76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular

Science.gov (United States)

2011-04-04

... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...

Advanced Public Transportation Systems. Technical Assistance Brief 2

Science.gov (United States)

1993-01-01

The Advanced Public Transportation Systems (APTS) Program requires evaluation : of pilot projects. This technical assistance brief discusses the guidelines set : for developing evaluation framework and methodology for local projects. 4p.

42 CFR 493.1838 - Training and technical assistance for unsuccessful participation in proficiency testing.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Training and technical assistance for unsuccessful... REQUIREMENTS Enforcement Procedures § 493.1838 Training and technical assistance for unsuccessful participation... may require the laboratory to undertake training of its personnel, or to obtain necessary technical...

International technical assistance example. Consortium action in Bulgaria; Exemple d`assistance internationale. Cas de la Bulgarie, action du consortium

Energy Technology Data Exchange (ETDEWEB)

Mattei, J M; Milhem, J L [CEA Centre d` Etudes de Fontenay-aux-Roses, 92 (France). Inst. de Protection et de Surete Nucleaire; Heuser, F W; Kelm, P [Gesellschaft fuer Reaktorsicherheit mbH (GRS), Koeln (Germany)

1993-03-01

The safety status achieved last year at the Kozloduy Nuclear Power Plant (NPP) and the capability of the Bulgarian Nuclear Safety Authority (BNSA) to assess the safety of the plant and the adequacy of proposed improvements have been matters of international concern. However, the Kozloduy NPP contributes 35-40 per cent of the electrical generating capacity in Bulgaria. For further operation of the plants, it is therefore, essential that safety is improved. In july 1991, the Commission of the European Communities (CEC) instituted a Six Months Emergency Action Programme for Bulgaria under the PHARE regional nuclear safety programme. The programme consisted of three parts: - an industrial emergency programme supporting the utility of the Kozloduy NPP, - a study to evaluate Bulgaria`s electricity needs, - technical assistance for reinforcement of the Bulgarian Nuclear Safety Authority. For the third part, complementary to the industrial emergency programme carried out by the WANO (World Association of Nuclear Operators), a Consortium of expert institutions and regulatory from EC member states was established by CEC for assistance to BNSA. The Consortium consisted of: - Institut de Protection et de Surete Nucleaire (IPSN), France, technical support of the French regulatory body, - Gesellschaft fur Anlagen und Reaktorsicherheit (GRS) mbH, Germany, an organization in safety engineering, technical support of governmental regulatory body, - AIB-Vincotte Nuclear (AVN), Belgium, the organization authorized by the Belgian Government for licensing and inspection of nuclear power plants, - UK Atomic Energy Authority (AEA Technology), an independent UK Government owned nuclear R and D and consultancy organization, - Nuclear Installations Inspectorate (NII) of the Health and Safety Executive, United Kingdom, the nuclear regulatory body for the United Kingdom.

The 1962 programme of technical assistance

International Nuclear Information System (INIS)

1962-01-01

Experts and equipment are provided by the Agency in response to requests from Member States after the requests have been examined by technical, financial and other relevant criteria. Under the 1962 programme to be financed with the Agency's own resources, assistance in the form of services of experts and equipment will be given to the following countries: Argentina, Brazil, Burma, Ceylon, Chile, Denmark, El Salvador, Ghana, Haiti, Indonesia, Iran, Iraq, Israel, Japan, Korea, Mexico, Pakistan, Paraguay, the Philippines, Portugal, Thailand, Tunisia, Turkey, the United Arab Republic, and Yugoslavia. Some details of the individual projects of assistance to be financed with the Agency's own resources are given

The Agency's Technical Co-operation programme with Peru, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $12.6 million of Agency support received, Peru ranks 4th among all recipients of technical assistance in the period 1958 - 1991, whereby it ranked as high as 2nd in each of the four years 1982 through 1985. More than half of the assistance during the past ten years has been provided in the form of equipment (59%), followed by expert services (29%) and training (12%). Forty-five per cent of the resources were provided by the Technical Assistance and Co-operation Fund, while 29% of the resources were made available through extrabudgetary contributions, and 21% by UNDP. The remaining 5% were provided in kind. With regard to project disbursement by sector, the largest areas have been agriculture (27%), general atomic energy development (17%), nuclear raw materials (14%), nuclear medicine (12%) and industry and hydrology (11%). Nuclear safety, nuclear engineering and technology, and nuclear physics and chemistry have each received less than ten per cent of the assistance provided

The Agency's Technical Co-operation programme with Egypt, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $22.2 million of Agency support received, Egypt ranks first among all recipients of technical assistance, not only for the period 1958 - 1991, but also held this rank in each of the five years 1982 through 1986 and in 1988. More than half of this assistance has been provided in the form of equipment (57%), followed by expert services (19%), training (17%) and sub-contracts (7%). With 42% and 43%, respectively, the Technical Assistance and Co-operation Fund and extrabudgetary contributions hold almost equal shares in the total resources available, while in-kind assistance accounts for 9% and UNDP for 6% of the resources. With regard to project disbursement during the past ten years, by sector, the two largest areas have been nuclear safety (34%) and agriculture (33%), followed by nuclear engineering and technology (11%). Smaller shares - from 4% to 7% each-- have gone to industry and hydrology, nuclear medicine, nuclear physics and chemistry, and general atomic energy development

The French Space Operation Act: Technical Regulations

Science.gov (United States)

Trinchero, J. P.; Lazare, B.

2010-09-01

The French Space Operation Act(FSOA) stipulates that a prime objective of the National technical regulations is to protect people, property, public health and the environment. Compliance with these technical regulations is mandatory as of 10 December 2010 for space operations by French space operators and for space operations from French territory. The space safety requirements and regulations governing procedures are based on national and international best practices and experience. A critical design review of the space system and procedures shall be carried out by the applicant, in order to verify compliance with the Technical Regulations. An independent technical assessment of the operation is delegated to CNES. The principles applied when drafting technical regulations are as follows: requirements must as far as possible establish the rules according to the objective to be obtained, rather than how it is to be achieved; requirements must give preference to international standards recognised as being the state of the art; requirements must take previous experience into account. Technical regulations are divided into three sections covering common requirements for the launch, control and return of a space object. A dedicated section will cover specific rules to be applied at the Guiana Space Centre. The main topics addressed by the technical regulations are: operator safety management system; study of risks to people, property, public health and the Earth’s environment; impact study on the outer space environment: space debris generated by the operation; planetary protection.

The Agency's Technical Co-operation programme with Sudan, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $5.7 million of Agency support received, Sudan ranks 31st among all recipients of technical assistance in the period 1958 through 1991. Over the past ten years, almost equal shares of this assistance were provided in the form of equipment (46%) and training (42%), and only a small percentage was provided in the form of expert services (12%). The best part of the resources was made available through the Technical Assistance and Co-operation Fund (77%), while in-kind and extrabudgetary contributions account for 13% and 10% of the resources, respectively. With regard to project disbursement during the past ten years, by sector, the two largest areas have been general atomic energy development (37%) and agriculture (21%), followed by nuclear medicine (14%). Smaller shares (6% each) have gone to nuclear physics and chemistry, nuclear engineering and technology, hydrology, and nuclear safety

Development of nuclear technology through International Technical Cooperation programme: Malaysian experience

International Nuclear Information System (INIS)

Ainul Hayati Daud

1997-01-01

In the advent of new technologies and knowledge, countries need to rely on one another for progress and development. At the same time, new challenges to development, which are beyond the competence of any country to approach individually, have emerged. These have led to greater need for international co-operation, particularly among the developing countries. In Malaysia, international technical co-operation has contributed significantly towards the development of nuclear technology. Malaysia has received technical assistance through the multilateral, regional and bilateral co-operation. This assistance complements the efforts of the government to meet the primary objectives of science and technology programme, which are; intensification of R and D capacity and applications of technologies, both acquired and developed, in national development. Over the last one and a half decade, more than 70 projects valued almost USD 15 millions, were implemented under the Technical Assistance Programme of the International Atomic Energy Agency and the Bilateral Technical Assistance Programme of Japan and Australia. Malaysia also has benefited from the regional technical co-operation programme such Regional Co-operative Agreement for Asia and Pacific Region, United Nation Department Programme, International Nuclear Co-operation in Asia. While receiving assistance, Malaysia continues to assist other developing countries in their development efforts in the fields of nuclear technology, through the various international co-operation programmes. This report reviews the technical assistance received through the international co-operation and its contributions towards the development of nuclear technology in Malaysia for period 1980 - 1996

Solar Technical Assistance Team Profile: Megan Day | State, Local, and

Science.gov (United States)

Tribal Governments | NREL Technical Assistance Team Profile: Megan Day Solar Technical governments to grow their installed solar capacity. We're finding out which communities have the most installed solar--both in terms of total capacity and per capita--and trying to figure out what the

77 FR 20369 - Applications for New Awards; Centers for Independent Living-Training and Technical Assistance

Science.gov (United States)

2012-04-04

... Education ACTION: Notice. Overview Information Centers for Independent Living--Training and Technical.... Funding Opportunity Description Purpose of Program The purpose of the Training and Technical Assistance grant under the Centers for Independent Living program is to provide training and technical assistance...

Technical assistance and Article IV of the NPT

International Nuclear Information System (INIS)

Bittencourt, H.F.S.

1975-01-01

The main concepts expressed in article IV of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) can also be found in the Statute of the International Atomic Energy Agency. My predecessor, Mr. Upendra Goswami, wrote the following some years ago: ''Even today, after a lapse of 14 years, the IAEA often presents to the outside world the aspect of an organization in which the control activities loom large and the promotional activities appear as a bit of thin icing on a 'safeguards' cake. But a closer look at the organization today would convince the intelligent observer that whatever might have been the object of the founding fathers, the organization promotes peaceful uses no less vigorously than it controls proliferation of nuclear arms.'' Since the IAEA's technical assistance programme started in 1958 and the NPT only came into existence ten years later, it is quite clear that the IAEA already had considerable experience in promoting the peaceful uses of atomic energy. However, in my view, we should always keep in mind that the technical assistance programme derives primarily from the Statute of the IAEA through a liberal interpretation of the intentions of our founding fathers, and in fact emerges as the sum total of requests from developing Member States. Since its inception in 1958, the IAEA's technical assistance programme has undergone some changes in its orientation and it is to this matter that I would like to call attention. (author)

TADS and Technical Assistance: Readings on System Design, Needs Assessment, Consultation, and Evaluation.

Science.gov (United States)

Trohanis, Pascal L., Ed.

The document reviews the technical assistance process used by TADS (Technical Assistance Development System), a project to provide support to HCEEP (Handicapped Children's Early Education Program) demonstration projects serving young handicapped children and their families. Chapter 1, by P. Trohanis, focuses on a number of questions that people…

The Agency's Technical Co-operation programme with the United Republic of Tanzania, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $ 3.4 million of Agency support received, the United Republic of Tanzania ranks 44th among all recipients of technical assistance in the period 1958 - 1991. Almost half of the assistance during the past ten years has been provided in the form of equipment (49%), followed by training through fellowships and scientific visits (29%) and expert services (22%). Ninety-two per cent of the resources were provided by the Technical Assistance and Co-operation Fund, the rest was made available through assistance in kind (5%) and through extrabudgetary contributions (3%). With regard to project disbursement by sector, by far the largest share has gone to agriculture (48%), followed by nuclear physics (20%), nuclear safety (17%) and nuclear medicine (11%)

IAEA's technical co-operation programme and its role in assisting member states in the safe utilisation of nuclear power

International Nuclear Information System (INIS)

Reed, J.

2000-01-01

In this contribution the author deals with the technical co-operation projects of the IAEA. The Agency's technical co-operation programme is a most welcome mechanism for the transfer of nuclear technology, and to developing countries it is certainly the most attractive side of the Agency, since it is through this programme that the IAEA can contribute to the solution of their problems through the provision of know-how, technology and training. (authors)

Manpower development for safe operation of nuclear power plant. China. Seminar on the technical support functions. Activity: 6.1.1-Task-03. Technical report

International Nuclear Information System (INIS)

Kofron, K.L.

1994-01-01

The seminar was held in Wuhan PRC from 01.10/94 - 01/14/94. It revolved about the role of the Technical Support Groups, both onsite and offsite, of the Nuclear Power Plant. This was to assist the Chinese in deciding their best course of action for the establishment and operation of this group

7 CFR 1470.8 - Technical and other assistance.

Science.gov (United States)

2010-01-01

... potential applicants dealing with the requirements of certification under the National Organic Program and... 652. (b) NRCS retains approval authority over certification of work done by non-NRCS personnel for the... production system, including specialty crop and organic production. In providing technical assistance to...

RANET technical guidelines: Interim technical guidelines for national assistance capabilities. Emergency preparedness and response. Date effective: 1 January 2007

International Nuclear Information System (INIS)

2006-12-01

The publication is issued as an attachment to EPR-RANET (2006) and has the same status. It provides administrative and technical guidelines for National Assistance Capabilities and enters into effect on 1 January 2007. Additional technical guidelines are under development by assistance work group under international Action Plan for Strengthening the International Preparedness and Response System for Nuclear and Radiological Emergencies. As these are finalised they will be included in this document

Emergency Response and Humanitarian Assistance Operations

Science.gov (United States)

2010-12-01

Humanitarian Assistance Operations Op Food DSTr I Support food distribution with U.S. ARMY / WFP - 03 to 18Fev2010 15 Dias 637,5 Ton de alimentos ...distribution by WFP – 10 a 18Mar2010 – 21 a 28Mar2010 1.723 Ton de Alimentos em 30 Dias Humanitarian Assistance Operations Op Food DSTr II Supporting food...distribution by WFP – 10 a 18Mar2010 8 Dias 420 Ton de alimentos Humanitarian Assistance Operations Op Food DSTr III Supporting food distribution by

Pennsylvania Department of Transportation's Local Technical Assistance Program (LTAP).

Science.gov (United States)

2010-11-01

The Pennsylvania Department of Transportations (PennDOT) Local Technical Assistance Program : (LTAP) was awarded to the Pennsylvania State Association of Township Supervisors (PSATS), with the : contract start date of December 1, 2005. PSATS led t...

13 CFR 124.704 - What additional management and technical assistance is reserved exclusively for concerns eligible...

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What additional management and.../SMALL DISADVANTAGED BUSINESS STATUS DETERMINATIONS 8(a) Business Development Management and Technical Assistance Program § 124.704 What additional management and technical assistance is reserved exclusively for...

Private sector involvement in the US program of technical assistance to IAEA safeguards

International Nuclear Information System (INIS)

Pepper, S.E.; Epel, L.; Maise, G.; Reisman, A.; Skalyo, J.

1995-01-01

The US Program of Technical Assistance to IAEA Safeguards (POTAS) relies on technical expertise found in the U. S private and public sectors. Since 1993, the international Safeguards Project Office (ISPO) has sought to increase the role of the private sector in POTAS. ISPO maintains and continues to develop a database of US companies interested in providing technical expertise to the IAEA. This database is used by ISPO to find appropriate contractors to respond to IAEA requests for technical assistance when the assistance can be provided by the private sector. The private sector is currently providing support in the development of equipment, training, and procedure preparation. POTAS also supports the work of private consultants. This paper discusses ISPO's efforts to identify suitable vendors and discusses conditions that hinder more substantial involvement by the private sector. In addition, the paper will discuss selected projects that are currently in progress and identify common problems that impede the progress and success of tasks performed by the private sector

34 CFR 86.302 - What are the procedures used by the Secretary for providing information or technical assistance?

Science.gov (United States)

2010-07-01

... providing information or technical assistance? 86.302 Section 86.302 Education Office of the Secretary... information or technical assistance? (a) The Secretary provides information or technical assistance to an IHE in writing, through site visits, or by other means. (b) The IHE shall inform the Secretary of any...

Final priority. Rehabilitation Training: Job-Driven Vocational Rehabilitation Technical Assistance Center. Final priority.

Science.gov (United States)

2014-08-19

The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Rehabilitation Training program to establish a Job-Driven Vocational Rehabilitation Technical Assistance Center (JDVRTAC). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to focus on training in an area of national need. Specifically, this priority responds to the Presidential Memorandum to Federal agencies directing them to take action to address job-driven training for the Nation's workers. The JDVRTAC will provide technical assistance (TA) to State vocational rehabilitation (VR) agencies to help them develop for individuals with disabilities training and employment opportunities that meet the needs of today's employers.

76 FR 41293 - Solicitation of Proposals for Technical Assistance Funding From the Native American Business...

Science.gov (United States)

2011-07-13

... for NABDI Technical Assistance Funding D. Submission of Application in Digital Format E. Application.... The IEED has spent considerable time and expense in collecting digital land grids, geographic...: Marketing studies. 9. What the NABDI Technical Assistance Funding Cannot Fund As stated above, these funds...

77 FR 34354 - Notice Inviting Informal Public Comment on Training and Technical Assistance and Disability...

Science.gov (United States)

2012-06-11

... and Technical Assistance and Disability Inclusion Programming AGENCY: Corporation for National and... implementation of a unified training and technical assistance (TTA) strategy and disability inclusion programming... to CNCS as we plan and prepare for this work. We will accept comments in writing, as described below...

13 CFR 124.701 - What is the purpose of the 7(j) management and technical assistance program?

Science.gov (United States)

2010-01-01

...) Business Development Management and Technical Assistance Program § 124.701 What is the purpose of the 7(j... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What is the purpose of the 7(j) management and technical assistance program? 124.701 Section 124.701 Business Credit and Assistance SMALL...

Technical quality assurance in conventional radiography by X-ray assistants

International Nuclear Information System (INIS)

Juran, R.; Buehler, G.; Schmidt, D.

1989-01-01

Without the X-ray assistant, regularly involved in everyday practice, technical quality assurance can hardly be accomplished. Therefore a model for the organization of quality assurance was developed and tested in practice. It implies accountable technical checks by the technician, that are controlled by a quality supervisor, and are subsequently evaluated by the radiation physics department. This positively influences quality consciousness of the radiographers and therefore the quality itself. (author)

Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015-2016.

Science.gov (United States)

Chiappone, Alethea; Smith, Teresa M; Estabrooks, Paul A; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

2018-04-26

The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015-2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily general information rather than tailored technical assistance. Technical

Pattern and impact of the Agency's technical assistance programme in the Asia and Pacific Region

International Nuclear Information System (INIS)

Nethsinghe, D.A.

1979-01-01

The main objectives of the Agency's technical assistance programmes are to promote the transfer of skills and knowledge relating to the peaceful uses of atomic energy to developing countries, to support the efforts of these countries to carry out their atomic energy activities safely and more efficiently, and to ensure that the technology transferred can continue to be applied usefully after the Agency's assistance has been completed. The assistance can be in the form of fellowship awards for training, for expert and consulting services, and for equipment. It may cover a wide range of scientific and technical fields. The impact of the Agency's technical assistance in several of these fields, i.e., reactors and power plants, prospecting for uranium and other raw materials, agriculture, industrial applications, and nuclear medicine, are reviewed

Training and technical assistance to enhance capacity building between prevention research centers and their partners.

Science.gov (United States)

Spadaro, Antonia J; Grunbaum, Jo Anne; Dawkins, Nicola U; Wright, Demia S; Rubel, Stephanie K; Green, Diane C; Simoes, Eduardo J

2011-05-01

The Centers for Disease Control and Prevention has administered the Prevention Research Centers Program since 1986. We quantified the number and reach of training programs across all centers, determined whether the centers' outcomes varied by characteristics of the academic institution, and explored potential benefits of training and technical assistance for academic researchers and community partners. We characterized how these activities enhanced capacity building within Prevention Research Centers and the community. The program office collected quantitative information on training across all 33 centers via its Internet-based system from April through December 2007. Qualitative data were collected from April through May 2007. We selected 9 centers each for 2 separate, semistructured, telephone interviews, 1 on training and 1 on technical assistance. Across 24 centers, 4,777 people were trained in 99 training programs in fiscal year 2007 (October 1, 2006-September 30, 2007). Nearly 30% of people trained were community members or agency representatives. Training and technical assistance activities provided opportunities to enhance community partners' capacity in areas such as conducting needs assessments and writing grants and to improve the centers' capacity for cultural competency. Both qualitative and quantitative data demonstrated that training and technical assistance activities can foster capacity building and provide a reciprocal venue to support researchers' and the community's research interests. Future evaluation could assess community and public health partners' perception of centers' training programs and technical assistance.

Technical co-operation report for 2001. Report by the Director General

International Nuclear Information System (INIS)

2001-01-01

the General Conference in resolution GC(45)/RES/11, the Secretariat has worked with Member States during the past year to update the Technical Cooperation Strategy, endorsed by the Board in 1997. Through implementation of the Strategy, the Agency has been successful in raising the quality of technical co-operation projects and increasing the impact of the programme on the development goals of its Member States. The Third Standing Advisory Group on Technical Assistance and Cooperation (SAGTAC III), which met in August 2001 and March 2002, examined the Strategy and advised the Director General on future objectives and the performance indicators with which to measure progress towards these objectives

Technical co-operation report for 2001. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

the General Conference in resolution GC(45)/RES/11, the Secretariat has worked with Member States during the past year to update the Technical Cooperation Strategy, endorsed by the Board in 1997. Through implementation of the Strategy, the Agency has been successful in raising the quality of technical co-operation projects and increasing the impact of the programme on the development goals of its Member States. The Third Standing Advisory Group on Technical Assistance and Cooperation (SAGTAC III), which met in August 2001 and March 2002, examined the Strategy and advised the Director General on future objectives and the performance indicators with which to measure progress towards these objectives.

Technical co-operation report for 2002. Report by the Director General

International Nuclear Information System (INIS)

2003-08-01

and to requests from Member States, the use of regional expertise is being expanded as a way to promote technical co-operation among developing countries. Member States are increasingly sharing their experience in building capacity to use nuclear techniques, and regional rosters of experts are being compiled to facilitate their participation in national and regional projects. In order to make a better use of the capabilities of Member State institutions, the Agency has initiated the work to develop well-defined policies and procedures for national execution of technical co-operation activities in national and regional projects. In response to a request from the Standing Advisory Group on Technical Assistance and Co-operation (SAGTAC) to look at new programme approval options, the Secretariat analyzed relevant stages of the entire programme cycle. The assessment identified a number of possible areas for action, and the information will be submitted to SAGTAC (July 2003) as background material when it reconsiders the subject of programme approval options. Technical co-operation programme implementation, measured in financial terms, increased to an all-time high of $74.6 million, well above the record level attained in 2001. This is an indication of the continued importance of the technical co-operation programme to Member States. However, new resources received for the programme were down to $67.7 million, the lowest level since 1998. It will be increasingly difficult to deliver the entire programme, which is based on extensive upstream work, realistic workplans and careful budgeting, if the resources for funding it are not assured and predictable. In addition, the international political situation made it more difficult to deliver the programme during the past year, and it will be necessary for all Member States to support the Secretariat in its efforts to implement the approved programme in the coming year

Technical assistance in Latin America

International Nuclear Information System (INIS)

Oteiza-Quirno, A.

1976-01-01

As in the other regions, nuclear technology development in Latin America reflects mainly the degree of technological development already existing in each country. It is quite significant that in nearly all countries in Latin America the medical profession has been the first to show interest in using nuclear techniques. As a result, a country such as Uruguay has become a source of recruitment for technical assistance experts in nuclear medicine to other developing countries, while at the same time it continues to receive assistance for new sophisticated techniques from the IAEA. Part of this assistance, in turn, comes from the neighbouring countries, Argentina and Brazil. For example, an expert from Uruguay is currently assigned under an Agency programme to Costa Rica, El Salvador and Guatemala, and experts from Argentina and Brazil have been sent to Uruguay. This is an example of 'horizontal' development, meaning mutual assistance between developing countries under programmes supported by the United Nations Agencies, which is now being emphasized by the United Nations Development Programme (UNDP). Still in the field of nuclear medicine, another significant model is provided by Bolivia. With assistance from the IAEA, and thanks to the availability of a good professional infrastructure in that country, a net of nuclear medicine services has been started, consisting of a well-developed nuclear medicine centre in La Paz and regional centres in Cochabamba, Sucre and Santa Cruz. Because of its great variations in altitude, Bolivia is in the position of being able to conduct research on the adaptation of man to diverse environmental conditions. The Agency has contributed, and continues to do so, to these programmes by sending experts, providing for training abroad of Bolivian doctors under its fellowship programmes, and providing basic equipment for all four centres. Independently of the cases described above, the IAEA has implemented or is implementing a considerable

Technical assistance from state health departments for communities engaged in policy, systems, and environmental change: the ACHIEVE Program.

Science.gov (United States)

Hefelfinger, Jenny; Patty, Alice; Ussery, Ann; Young, Walter

2013-10-24

This study assessed the value of technical assistance provided by state health department expert advisors and by the staff of the National Association of Chronic Disease Directors (NACDD) to community groups that participated in the Action Communities for Health, Innovation, and Environmental Change (ACHIEVE) Program, a CDC-funded health promotion program. We analyzed quantitative and qualitative data reported by community project coordinators to assess the nature and value of technical assistance provided by expert advisors and NACDD staff and the usefulness of ACHIEVE resources in the development and implementation of community action plans. A grounded theory approach was used to analyze and categorize phrases in text data provided by community coordinators. Open coding placed conceptual labels on text phrases. Frequency distributions of the quantitative data are described and discussed. The most valuable technical assistance and program support resources were those determined to be in the interpersonal domain (ie, interactions with state expert advisors, NACDD staff, and peer-to-peer support). The most valuable technical assistance events were action institutes, coaches' meetings, webinars, and technical assistance conference calls. This analysis suggests that ACHIEVE communities valued the management and training assistance provided by expert advisors and NACDD staff. State health department expert advisors provided technical guidance and support, including such skills or knowledge-based services as best-practice strategies, review and discussion of community assessment data, sustainability planning, and identification of possible funding opportunities. NACDD staff led development and implementation of technical assistance events.

The power of a collaborative relationship between technical assistance providers and community prevention teams: A correlational and longitudinal study.

Science.gov (United States)

Chilenski, Sarah M; Perkins, Daniel F; Olson, Jonathan; Hoffman, Lesa; Feinberg, Mark E; Greenberg, Mark; Welsh, Janet; Crowley, D Max; Spoth, Richard

2016-02-01

Historically, effectiveness of community collaborative prevention efforts has been mixed. Consequently, research has been undertaken to better understand the factors that support their effectiveness; theory and some related empirical research suggests that the provision of technical assistance is one important supporting factor. The current study examines one aspect of technical assistance that may be important in supporting coalition effectiveness, the collaborative relationship between the technical assistance provider and site lead implementer. Four and one-half years of data were collected from technical assistance providers and prevention team members from the 14 community prevention teams involved in the PROSPER project. Spearman correlation analyses with longitudinal data show that the levels of the collaborative relationship during one phase of collaborative team functioning associated with characteristics of internal team functioning in future phases. Results suggest that community collaborative prevention work should consider the collaborative nature of the technical assistance provider - prevention community team relationship when designing and conducting technical assistance activities, and it may be important to continually assess these dynamics to support high quality implementation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Endoscopic and keyhole endoscope-assisted neurosurgical approaches: a qualitative survey on technical challenges and technological solutions.

Science.gov (United States)

Marcus, Hani J; Cundy, Thomas P; Hughes-Hallett, Archie; Yang, Guang-Zhong; Darzi, Ara; Nandi, Dipankar

2014-10-01

The literature reflects a resurgence of interest in endoscopic and keyhole endoscope-assisted neurosurgical approaches as alternatives to conventional microsurgical approaches in carefully selected cases. The aim of this study was to assess the technical challenges of neuroendoscopy, and the scope for technological innovations to overcome these barriers. All full members of the Society of British Neurosurgeons (SBNS) were electronically invited to participate in an online survey. The open-ended structured survey asked three questions; firstly, whether the surgeon presently utilises or has experience with endoscopic or endoscope-assisted approaches; secondly, what they consider to be the major technical barriers to adopting such approaches; and thirdly, what technological advances they foresee improving safety and efficacy in the field. Responses were subjected to a qualitative research method of multi-rater emergent theme analysis. Three clear themes emerged: 1) surgical approach and better integration with image-guidance systems (20%), 2) intra-operative visualisation and improvements in neuroendoscopy (49%), and 3) surgical manipulation and improvements in instruments (74%). The analysis of responses to our open-ended survey revealed that although opinion was varied three major themes could be identified. Emerging technological advances such as augmented reality, high-definition stereo-endoscopy, and robotic joint-wristed instruments may help overcome the technical difficulties associated with neuroendoscopic approaches. Results of this qualitative survey provide consensus amongst the technology end-user community such that unambiguous goals and priorities may be defined. Systems integrating these advances could improve the safety and efficacy of endoscopic and endoscope-assisted neurosurgical approaches.

Enhancing Effective Stakeholder Participation in Local Groundwater Sustainability Planning through Technical Assistance in California

Science.gov (United States)

Weintraub, C.; Christian-Smith, J.; Dobbin, K.; Cullen, K.

2017-12-01

This presentation will share content from UCS's new publication, Getting Involved in Groundwater; A Guide to Effective Engagement in California's Groundwater Sustainability Plans, as well as lessons learned from collaborating with community organizations to provide technical assistance to Groundwater Sustainability Agency (GSA) board members and stakeholders in the San Joaquin Valley on Groundwater Sustainability Plan (GSP) development. California's Sustainable Groundwater Management Act (SGMA) mandates extensive stakeholder engagement, presenting an opportunity for unincorporated, low-income communities that have historically been affected by but not included in water decisions. However, implementation requires a concerted, thoughtful effort. Through technical assistance and strategic outreach, the Union of Concerned Scientists (UCS) is working to ensure stakeholder engagement in GSP development is robust, diverse, and supported by the best science available. UCS created the GSP stakeholder engagement guide to equip GSA members, scientists and interested community members to meaningfully engage in the GSP development process. The guide serves as a technical primer on SGMA's GSP process and as a resource for understanding groundwater management in California. The guide is just one component of a larger effort to overcome barriers to effective engagement in sustainable groundwater management, especially those presented by technical information. In April, UCS co-hosted a technical assistance workshop for GSA and advisory committee members in Visalia, CA with the Community Water Center (CWC), a local environmental justice non-profit. The workshop was well received and UCS and the CWC were invited to host a second workshop in June. To deepen this engagement and provide one-on-one technical assistance, UCS developed a program to match relevant water experts in the UCS Science Network with GSA members or involved community members in need of specific technical support

Text processing for technical reports (direct computer-assisted origination, editing, and output of text)

Energy Technology Data Exchange (ETDEWEB)

De Volpi, A.; Fenrick, M. R.; Stanford, G. S.; Fink, C. L.; Rhodes, E. A.

1980-10-01

Documentation often is a primary residual of research and development. Because of this important role and because of the large amount of time consumed in generating technical reports, particularly those containing formulas and graphics, an existing data-processing computer system has been adapted so as to provide text-processing of technical documents. Emphasis has been on accuracy, turnaround time, and time savings for staff and secretaries, for the types of reports normally produced in the reactor development program. The computer-assisted text-processing system, called TXT, has been implemented to benefit primarily the originator of technical reports. The system is of particular value to professional staff, such as scientists and engineers, who have responsibility for generating much correspondence or lengthy, complex reports or manuscripts - especially if prompt turnaround and high accuracy are required. It can produce text that contains special Greek or mathematical symbols. Written in FORTRAN and MACRO, the program TXT operates on a PDP-11 minicomputer under the RSX-11M multitask multiuser monitor. Peripheral hardware includes videoterminals, electrostatic printers, and magnetic disks. Either data- or word-processing tasks may be performed at the terminals. The repertoire of operations has been restricted so as to minimize user training and memory burden. Spectarial staff may be readily trained to make corrections from annotated copy. Some examples of camera-ready copy are provided.

Technical co-operation report for 2000. Report by the Director General

International Nuclear Information System (INIS)

2001-01-01

This report covers three separate topics. Part one fulfills the Agency's obligation under the General Conference resolution GC(44)/RES/18 to report on the Strengthening of Technical Co-operation. It covers the period from 1 April 2000 to 31 March 2001. The report examines the finalization of the 2001-2002 technical co-operation programme and several key concepts of the Technical Co-operation Strategy such as Partners in Development, Technical Co-operation among Developing Countries, and the continuing evolution of Regional Resource Centres. Reflecting an important trend in the technical co-operation programme, which was mandated by the General Conference, the report describes the results achieved in several programmes in least developed countries. Part two reports on the major achievements of the technical co-operation programme in 2000 in the different regions of the world. Part three presents a summary of the financial and non-financial parameters of the technical co-operation programme. The supplement to the report provides a more detailed review of resources and contributions, disbursements and non-financial indicators

Technical co-operation report for 2000. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This report covers three separate topics. Part one fulfills the Agency's obligation under the General Conference resolution GC(44)/RES/18 to report on the Strengthening of Technical Co-operation. It covers the period from 1 April 2000 to 31 March 2001. The report examines the finalization of the 2001-2002 technical co-operation programme and several key concepts of the Technical Co-operation Strategy such as Partners in Development, Technical Co-operation among Developing Countries, and the continuing evolution of Regional Resource Centres. Reflecting an important trend in the technical co-operation programme, which was mandated by the General Conference, the report describes the results achieved in several programmes in least developed countries. Part two reports on the major achievements of the technical co-operation programme in 2000 in the different regions of the world. Part three presents a summary of the financial and non-financial parameters of the technical co-operation programme. The supplement to the report provides a more detailed review of resources and contributions, disbursements and non-financial indicators.

45 CFR 2524.10 - For what purposes will technical assistance and training funds be made available?

Science.gov (United States)

2010-10-01

... OTHER SPECIAL GRANTS § 2524.10 For what purposes will technical assistance and training funds be made... 45 Public Welfare 4 2010-10-01 2010-10-01 false For what purposes will technical assistance and training funds be made available? 2524.10 Section 2524.10 Public Welfare Regulations Relating to Public...

Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015–2016

Science.gov (United States)

Smith, Teresa M.; Estabrooks, Paul A.; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

2018-01-01

Purpose and Objectives The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. Intervention Approach We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015–2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. Evaluation Methods We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Results Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily

National Institute of Justice (NIJ) Center Requirements Definition, Technical Assistance, and Analysis

National Research Council Canada - National Science Library

Frantz, Frederick

2003-01-01

.... The current technology thrust areas for the Northeast Region are Concealed Weapons Detection, Secure Communications, Computer Forensics, Information Management, AGILE, and various technical assistance projects...

Writer`s guide for technical procedures

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

A primary objective of operations conducted in the US Department of Energy (DOE) complex is safety. Procedures are a critical element of maintaining a safety envelope to ensure safe facility operation. This DOE Writer`s Guide for Technical Procedures addresses the content, format, and style of technical procedures that prescribe production, operation of equipment and facilities, and maintenance activities. The DOE Writer`s Guide for Management Control Procedures and DOE Writer`s Guide for Emergency and Alarm Response Procedures are being developed to assist writers in developing nontechnical procedures. DOE is providing this guide to assist writers across the DOE complex in producing accurate, complete, and usable procedures that promote safe and efficient operations that comply with DOE orders, including DOE Order 5480.19, Conduct of Operations for DOE Facilities, and 5480.6, Safety of Department of Energy-Owned Nuclear Reactors.

Applied Operations Research: Operator's Assistant

Science.gov (United States)

Cole, Stuart K.

2015-01-01

NASA operates high value critical equipment (HVCE) that requires trouble shooting, periodic maintenance and continued monitoring by Operations staff. The complexity HVCE and information required to maintain and trouble shoot HVCE to assure continued mission success as paper is voluminous. Training on new HVCE is commensurate with the need for equipment maintenance. LaRC Research Directorate has undertaken a proactive research to support Operations staff by initiation of the development and prototyping an electronic computer based portable maintenance aid (Operator's Assistant). This research established a goal with multiple objectives and a working prototype was developed. The research identified affordable solutions; constraints; demonstrated use of commercial off the shelf software; use of the US Coast Guard maintenance solution; NASA Procedure Representation Language; and the identification of computer system strategies; where these demonstrations and capabilities support the Operator, and maintenance. The results revealed validation against measures of effectiveness and overall proved a substantial training and capability sustainment tool. The research indicated that the OA could be deployed operationally at the LaRC Compressor Station with an expectation of satisfactorily results and to obtain additional lessons learned prior to deployment at other LaRC Research Directorate Facilities. The research revealed projected cost and time savings.

Examining the Highs and Lows of the Collaborative Relationship Between Technical Assistance Providers and Prevention Implementers.

Science.gov (United States)

Chilenski, Sarah M; Welsh, Janet; Olson, Jonathan; Hoffman, Lesa; Perkins, Daniel F; Feinberg, Mark E

2018-02-01

The PROSPER model uses a three-tiered community partnership, university researcher, and Cooperative Extension-based technical assistance system to support the delivery of evidence-based interventions in communities. This study examines the trajectory and predictors of the collaborative relationship between technical assistance providers and community teams across the three phases of organization, implementation, and sustainability. Members of 14 PROmoting School-university-community Partnerships to Enhance Resilience (PROSPER) community teams and directors of local agencies rated communities' levels of readiness and adolescent substance use norms. Technical assistance providers rated their collaborative relationship with their teams at 14 occasions across 4.5 years. Results from mixed models show that levels of collaboration were stable until the sustainability phase, when they increased significantly. Team differences in change were significant during the implementation phase. Community readiness predicted levels of the collaborative relationship over time: high community readiness was associated with a high level of collaboration during organization, but a decline in collaboration during implementation. These results provide a more nuanced understanding of the relationship between technical assistance provision and community prevention teams and lead to recommendations to improve dissemination models to achieve a greater public health impact.

The next step: intelligent digital assistance for clinical operating rooms

Directory of Open Access Journals (Sweden)

Miehle Juliana

2017-08-01

Full Text Available With the emergence of new technologies, the surgical working environment becomes increasingly complex and comprises many medical devices that have to be taken cared of. However, the goal is to reduce the workload of the surgical team to allow them to fully focus on the actual surgical procedure. Therefore, new strategies are needed to keep the working environment manageable. Existing research projects in the field of intelligent medical environments mostly concentrate on workflow modeling or single smart features rather than building up a complete intelligent environment. In this article, we present the concept of intelligent digital assistance for clinical operating rooms (IDACO, providing the surgeon assistance in many different situations before and during an ongoing procedure using natural spoken language. The speech interface enables the surgeon to concentrate on the surgery and control the technical environment at the same time, without taking care of how to interact with the system. Furthermore, the system observes the context of the surgery and controls several devices autonomously at the appropriate time during the procedure.

Visual assistance system for cyclotron operation

International Nuclear Information System (INIS)

Okamura, Tetsuya; Tachikawa, Toshiki; Murakami, Tohru.

1994-01-01

A computer-based operation system for a cyclotron which assists operators has been developed. It is the operation assistance system depending on visual sense to indicate beam parameters to operators. First, the mental model of operators at the time of beam adjustment was analyzed, and it was presumed to be composed of five partial mental models, that is, beam behavior model, feasible setting region model, parameter sensitivity model, parameter interrelation model and status map model. Next, three visual interfaces were developed. Beam trajectory is rapidly calculated and graphically displayed whenever operators change parameters. Feasible setting regions (FSR) for parameters that satisfy the beam acceptance criteria of a cyclotron are indicated. The distribution of beam current values which are the quantity for evaluating adjustment is indicated as search history. Finally, for evaluating the system effectiveness, the search time required to reach the optimum conditions was measured. In addition, the system usability was evaluated by written questionnaires. The result of experiment showed the reduction of search time by about 65%. The written questionnaires survey showed the operators highly evaluate system usability. (K.I.)

13 CFR 120.714 - How are grants made to non-lending technical assistance providers (NTAP)?

Science.gov (United States)

2010-01-01

... entity that is not an Intermediary may apply to SBA for a grant to provide marketing, management and... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false How are grants made to non-lending technical assistance providers (NTAP)? 120.714 Section 120.714 Business Credit and Assistance SMALL BUSINESS...

UMTRA technical assistance contractor Quality Assurance Program Plan

International Nuclear Information System (INIS)

Pehrson, P.

1993-01-01

This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAC Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements. The key to ensuring compliance with this directive is a two-step professional approach: utilize the quality system in all areas of activity, and generate a personal commitment from all personnel to provide quality service. The quality staff will be experienced, trained professionals capable of providing maximum flexibility to Project goal attainment. Such flexibility will enable the staff to be more cost effective and to further improve communication and coordination. To provide control details, this QAPP will be supplemented by approved standard operating procedures that provide requirements for performing the various TAC quality-related activities. These procedures shall describe applicable design input and document control activities and documentation

Operations Monitoring Assistant System Design

Science.gov (United States)

1986-07-01

Logic. Artificial Inteligence 25(1)::75-94. January.18. 41 -Nils J. Nilsson. Problem-Solving Methods In Artificli Intelligence. .klcG raw-Hill B3ook...operations monitoring assistant (OMA) system is designed that combines operations research, artificial intelligence, and human reasoning techniques and...KnowledgeCraft (from Carnegie Group), and 5.1 (from Teknowledze). These tools incorporate the best methods of applied artificial intelligence, and

Co-operation in nuclear development: The case of Hungary

International Nuclear Information System (INIS)

Kroen, H.

1990-01-01

Hungary became a Member of the IAEA in 1957 and has participated in the programme of technical assistance and co-operation from its start in 1958. By the end of 1976, Hungary ranked as the fifteenth largest recipient of IAEA technical assistance. Since then, there has been a significant increase in overall technical co-operation activities, and by the end of 1988 a total of over US $9.5 million of assistance had been received by Hungary, making it the fifth largest recipient of all Member States. In view of this situation, a special evaluation review was carried out in 1989 of the IAEA's technical co-operation programme in Hungary over the period 1976-1989. This evaluation review has shown that, simultaneously with the increase in the IAEA's support, there has been a rapid development in Hungary of the national nuclear infrastructure and this has permitted the country to absorb and utilize the assistance provided to the maximum extent. 7 figs

The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (Spanish Edition); Texto Revisado de Los Principios Rectores n Normas Generales de Ejecucion Para la Prestacion de Asistencia Tecnica por el Organismo

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-03-15

The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules. [Spanish] El 21 de febrero de 1979 la Junta de Gobernadores aprobo el texto revisado de los Principios rectores y normas generales de ejecucion para la prestacion de asistencia tecnica por el Organismo. Para informacion de todos los Estados Miembros, en el presente documento se transcribe dicho texto. En el Anexo del texto revisado de los Principios rectores y normas generales de ejecucion se transcriben tambien las disposiciones prescritas por la Junta de Gobernadores el 24 de septiembre de 1977 acerca de la aplicacion de salvaguardias en relacion con la asistencia tecnica.

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Science.gov (United States)

2010-04-01

... capacity building and technical assistance efforts aimed at improving the competencies of the personnel who... developed with funds under this section are made available to be shared with other States, SDA's and the... contributing to the National Network. (2) All shared costs shall be allocated among the contributing funding...

The evaluator as technical assistant: A model for systemic reform support

Science.gov (United States)

Century, Jeanne Rose

This study explored evaluation of systemic reform. Specifically, it focused on the evaluation of a systemic effort to improve K-8 science, mathematics and technology education. The evaluation was of particular interest because it used both technical assistance and evaluation strategies. Through studying the combination of these roles, this investigation set out to increase understanding of potentially new evaluator roles, distinguish important characteristics of the evaluator/project participant relationship, and identify how these roles and characteristics contribute to effective evaluation of systemic science education reform. This qualitative study used interview, document analysis, and participant observation as methods of data collection. Interviews were conducted with project leaders, project participants, and evaluators and focused on the evaluation strategies and process, the use of the evaluation, and technical assistance. Documents analyzed included transcripts of evaluation team meetings and reports, memoranda and other print materials generated by the project leaders and the evaluators. Data analysis consisted of analytic and interpretive procedures consistent with the qualitative data collected and entailed a combined process of coding transcripts of interviews and meetings, field notes, and other documents; analyzing and organizing findings; writing of reflective and analytic memos; and designing and diagramming conceptual relationships. The data analysis resulted in the development of the Multi-Function Model for Systemic Reform Support. This model organizes systemic reform support into three functions: evaluation, technical assistance, and a third, named here as "systemic perspective." These functions work together to support the project's educational goals as well as a larger goal--building capacity in project participants. This model can now serve as an informed starting point or "blueprint" for strategically supporting systemic reform.

The Agency's Technical Co-operation programme with Argentina, 1982-1992. Country programme summaries

International Nuclear Information System (INIS)

1992-01-01

The country programme summary reported here is one in the series of such studies being undertaken of the Agency's TC programme with Member States. With over $7.5 million of Agency support received, Argentina ranks 22nd among all recipients of technical assistance during the period 1958 through 1991. Forty-six per cent of the assistance received during the past ten years has been provided in the form of equipment, complemented by expert services (40%) and training (14%). The largest share of the resources was made available by UNDP (87%), and only small shares were provided through the TACF (12%) and assistance in kind (less than 1%). With regard to total disbursements - by sector - under those projects that were operational during the period 1982 through mid-December 1992, by far the largest area has been nuclear engineering and technology (91%), while only very small shares went to nuclear safety (4%), industry and hydrology (3%) and agriculture (2%). During the same period, the country has provided experts and training course lectures for a total of 601 assignments, and has hosted 153 fellowships and scientific visits as well as 42 regional and interregional training courses with a total of 568 participants

Technical assistance and seasonality in the diet and production of dairy herds in household agriculture of Western Paraná

Directory of Open Access Journals (Sweden)

Rodrigo Cesar dos Reis Tinini

2015-02-01

Full Text Available The objective of the present study was to characterize the food sources, as well as the composition and quality of milk obtained from household farms of western Paraná State (Brazil with and without technical assistance during the different seasons. For such, 24 properties were selected, 12 of which only received assistance and technical support. Four milk samples were taken (summer, autumn, winter and spring to assess the physicochemical composition, somatic cell count and total bacterial count and feed supplied to the animals to assess the chemical composition (crude protein, ash, dry matter and neutral detergent fiber. The data were analyzed in a completely randomized design with a 2 × 4 factorial arrangement; the first factor was the presence and absence of technical assistance and the second factor was the four seasons of the year. Due to the dairy tradition of properties in the region, technical assistance had no significant effects on the health and nutritional quality of food, the number of animals, the production, or total bacterial count, which suffered oscillations only depending on the seasons of the year. However, the presence of assistance contributed to reducing somatic cell counts of milk produced and marketed. The technical assistance does not affect the quality of forages and concentrates used or the milk composition; however, it improves the sanitary quality of the milk produced throughout the four seasons of the year in household farms of western Paraná.

TECHNICAL BASIS FOR VENTILATION REQUIREMENTS IN TANK FARMS OPERATING SPECIFICATIONS DOCUMENTS

Energy Technology Data Exchange (ETDEWEB)

BERGLIN, E J

2003-06-23

This report provides the technical basis for high efficiency particulate air filter (HEPA) for Hanford tank farm ventilation systems (sometimes known as heating, ventilation and air conditioning [HVAC]) to support limits defined in Process Engineering Operating Specification Documents (OSDs). This technical basis included a review of older technical basis and provides clarifications, as necessary, to technical basis limit revisions or justification. This document provides an updated technical basis for tank farm ventilation systems related to Operation Specification Documents (OSDs) for double-shell tanks (DSTs), single-shell tanks (SSTs), double-contained receiver tanks (DCRTs), catch tanks, and various other miscellaneous facilities.

Fiscal 1994 report for April. PHARE and TACIS: Technical assistance by EC; PHARE to TACIS: EC no gijutsu enjo

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-06-01

Although the PHARE (Poland and Hungary Assistance for Restructuring of Economy) program which was started in December 1989 was initially intended to work for Poland and Hungary, yet the number of countries to enjoy the assistance has increased due to political changes in progress in CEE (Central and Eastern Europe) countries, and now 11 countries are under cover of the program. PHARE assistance funds are not loans, but are granted to the receiving countries as subsidies for their economic renovation activities. The funds are not invested directly in business activities, but are utilized to help governments implement their renovation programs. That is, they are spent for investigations for various renovation programs, policy and program formulation, transfer of professional knowledge and technology, and for technical assistance for education and training. The TACIS (Technical Assistance CIS) program which was started in July 1991 is again for technical assistance like PHARE, and aims to help NIS (New Independent State) countries implement their projects for transition to the market economy. Assistance activities include counselling about policy formulation, system and legal framework building, and training of experts and the supply of equipment required for carrying out the said assistance activities. (NEDO)

Safe operation of critical assemblies and research reactors. Code of practice and Technical appendix. 1971 ed

International Nuclear Information System (INIS)

Cox, J.

1971-01-01

This book is in two parts. The first is a Code of Practice for the Safe Operation of Critical Assemblies and Research Reactors, prepared as a result of a meeting of experts which took place in Vienna on 20-24 May 1968. The Code has been prepared by the International Atomic Energy Agency in co-operation with the World Health Organization, and its publication is sponsored by both organizations. In addition, the Code was approved by the Board of Governors of the International Atomic Energy Agency on 16 December 1968 as part of the Agency's safety standards, which are applied to operations undertaken by Member States with the assistance of the Agency. The Board, in approving the publication of the present book, also recommended Member States to take the Code into account in the formulation of national regulations and recommendations. The second part of the book is a Technical Appendix to give information and illustrative samples that would be helpful in implementing the Code of Practice. This second part, although published under the same cover, is not part of the Code. An extensive Bibliography, amplifying the Technical Appendix, is included at the end.

The Agency's Technical Co-operation programme in Chile, 1981-1991. Country programme evaluation

International Nuclear Information System (INIS)

1992-01-01

Agency support for nuclear activities in Chile dates back to the early 1960s. During the last ten years, the period covered by this evaluation, this support has considerably expanded. In the period 1981-1991, 62 Agency projects with allotments amounting to over $7 million were completed or are under implementation. Through this co-operation Chile has received 360 man-months of expert services, $3.4 million worth of equipment, and 105 fellowships for some 390 man-months of training. In addition, 262 Chileans attended 219 Agency regional and interregional training courses, and Chilean institutions were awarded 40 research contracts worth over $325,000. This evaluation covers ten years of Agency technical co-operation with Chile, during which 35 projects were completed and 27 are still being implemented. Eight major sectors received assistance: general atomic energy development; nuclear physics; nuclear raw materials; nuclear engineering and technology; nuclear techniques in agriculture; nuclear medicine; hydrology; and nuclear safety. The evaluation concluded that, overall, the Agency's technical co-operation activities have, in keeping with the national priorities concerning peaceful nuclear applications, contributed substantially to the establishment of Chile's nuclear scientific and technical infrastructure, and played a major role in Chile's efforts to introduce nuclear applications in a number of sectors of the economy, with many benefits for broader national development objectives. Another strength of the Agency's programme with Chile is the high level of commitment and dedication that was noted in the great majority of recipient institutions, and in particular at the Comision Chilena de Energia Nuclear, CChEN. Mention should also be made of the fact that bureaucracy appears to be less severe than in some other developing countries, and that constraints that frequently affect other countries, such as insufficient counterpart commitment and lack of continuity of

Technical aspects of ageing for long-term operation

International Nuclear Information System (INIS)

2003-01-01

The aspects of plant ageing management gained increasing attention over the last ten years. Numerous technical studies have been performed to study the impact of ageing mechanisms on the safe and reliable operation of nuclear power plants. National research activities have been initiated or are in progress to provide the technical basis for decision making processes. The long-term operation of nuclear power plants is influenced by economic considerations, the socio-economic environment including public acceptance, developments in research and the regulatory framework, the availability of technical infrastructure to maintain and service the systems, structures and components as well as qualified personnel. This document restricts itself to the technical aspects of the basis for long-term operation. Its objective is the characterisation of technical key items. Regulatory aspects are being discussed within CNRA. The light water reactor (LWR) nuclear power plants in operation are generically of pressurised water reactor (PWR) or boiling water reactor (BWR) type. The design principles of the nuclear steam supply system (NSSS) are proven in long-term operation as well as the principles being applied to the balance of plant (BOP), although a rather large variety of technical solutions do exist. The steps in the developments were tremendous in the 60's and 70's up to a power output of 1200 MWe followed by a period of further optimisation in the 80's and 90's, which raised it close to 1500 MWe. The NPPs in operation can be grouped into different generations of design in order to characterise similarities in technical principles and manufacturing standards. In the area of civil and mechanical structures and components there has been continuous development to optimise the design, the materials used as well as the manufacturing technology. The majority of these structures and components is still in use. In principle there are no major obstacles to further use of these

Ignalina plant licensing process, international co-operation and assistance

International Nuclear Information System (INIS)

Bystedt, P.

1999-01-01

The challenge for Lithuania as a country with regained independence was to perform a licensing review in a way never done before in the country and in a time schedule that was extremely short. The work included establishing of the licensing base, strengthening the regulatory authority and organising the technical support, establish and implement a safety improvement program, production of the safety case and review of the safety case, and to derive a conclusion regarding whether to issue a licence or not. This was to be done together with other tasks, such as implementation of modifications included in the safety improvement programme at Ignalina, implementation of a new storage for spent fuel and, most important of all, to manage the operational safety at the plant. The achievements are impressive seen in view of the point of start and in view of the time and resources that have been available. Lithuania has put forward a unique safety documentation of an RBMK reactor and presented an in-depth safety evaluation in full openness to Western experts, giving the unique possibility to compare the safety of the Ignalina reactors to Western standards. The co-operation that has been established between Lithuania and Western experts through different assistance programmes is of outmost value, for all involved parties. Co-operation should continue as one element of the challenges for the future

A review of IAEA's technical co-operation programme

International Nuclear Information System (INIS)

Samiei, M.

2004-01-01

Full text: The Technical Co-operation (TC) Programme is part of the Agency's mandate 'to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world.' The IAEA's role under this Programme is that of a scientific and technical agency making a discrete but significant contribution to sustainable development goals through the transfer of nuclear science and technology. TC is a high impact programme focusing on development needs with about 800 active projects annually with a budget of over $70M, 30% of which is targeted on training and capacity building in over 100 Member States. Since 1970, over 80,000 scientists and specialists from developing countries have been trained in nuclear science and technology and in nuclear power and safety. A number of trends in the world at large will be likely to influence the Agency's TC programme in the next several years: The use of nuclear technologies in developing countries is growing as local infrastructures improve and technology transfer increases, especially among developing countries; Some countries and institutions are becoming more self-reliant as viable markets develop for nuclear technology, based on an increased awareness of their benefits; As facilities age, safe strategies for life extension and for decommissioning are assuming increasing importance, while there is some renewed positive attention to nuclear power in several parts of the world. Concern is increasing related to the potential for malicious acts involving nuclear facilities or unsecured nuclear and other radioactive material. As the nuclear workforce ages, the management of nuclear knowledge is gaining increasing importance, including the need to maintain the safety and security of nuclear installations and their continued reliable operation. It is difficult to forecast precisely how these trends will influence the assistance requested by Member States, but it is already clear that there will be increased

Predicting technology operational availability using technical maturity assessment

International Nuclear Information System (INIS)

Kenley, C.R.; Creque, T.R.

1998-01-01

A technical maturity assessment method was performed by systems engineers in collaboration with an advisory panel composed of team members from different Department of Energy sites and from different engineering and science disciplines. Various stabilization technologies were assessed annually as to their relative maturity and availability for use in stabilizing nuclear materials. After three years of assessments, several of the technologies are now components of operational systems. A regression analysis of the historical assessments was performed, and it was concluded that the numerical technical maturity score produced by a team of experts can provide a powerful predictor of the time remaining until the operational application of technologies

Training for Technical Assistants: Technical Assistance Program

Science.gov (United States)

1986-09-01

shortage of technical ptfesson until such time as English , "speking instructors might be trained, There. would be An aumcation of committed on-calI...12 hours in classroom Instruction, students in English as a Second nel Research and Development Computer.taught students Language. The program Is...hbeels "p.-ogram. A Iot ’ atar boiler arn tank heats týe food enroute to its destination. 1.0. A new tor of dust ptectleon to protect machine .perators

Methodological approach to participatory formulation of agricultural technical assistance plans with territorial approach

Directory of Open Access Journals (Sweden)

Holmes Rodríguez Espinosa

2015-10-01

Full Text Available The collective identification of needs and shared decision-making in projects’ formulation for agricultural development is a process that requires the identification of participatory methodologies to promote active and reflective engagement of producers. The aim of this study was to evaluate a methodological approach for participatory formulation of technical assistance plan with territorial approach. Matrix analysis for the identification and prioritization of the most limiting technical assistance factors for milk production was performed and alternative solutions were defined, through participatory workshops with farmers. The results show the advantages of a collective reflection with stakeholders and quantitative tools reducing subjectivity in decision-making, improving participation in their own development and identifying acceptable alternatives to farmers and viable to the municipality in order to improve lack of pasture and forage management, implementation of good agricultural practices GAP and rational use of agrochemicals.

Estimation of regulated term of technical systems further operation

International Nuclear Information System (INIS)

Strel'nikov, V.P.

2008-01-01

The technique of estimating the regulated term of technical systems further operation on the basis of data on failures during operation and use of probabilistic-physical model of failures (DN-distribution) is proposed

Occupational exposure to ambient electromagnetic fields of technical operational personnel working for a mobile telephone operator

International Nuclear Information System (INIS)

Chauvin, S.; Gibergues, M. L.; Wuethrich, G.; Picard, D.; Desreumaux, J. P.; Bouillet, J. C.

2009-01-01

In order to investigate the exposure of operational personnel to radiofrequency electromagnetic fields when working for a mobile telephone operator, exposimeters were used to make individual records on 23 Technical Operations personnel (mobile telephone maintenance staff) and also on 22 Other Workers. The exposure densities, to which each of the 45 subjects was subjected, were quantified using 229 exposure indicators. Cluster analysis techniques were applied to the data, in an attempt to show that they would re-emerge as belonging to one of the two groups, i.e. the Technical Operational Personnel group or the Other Workers group. This exploratory investigation has shown that the cluster analysis does not reveal a sufficiently reliable emergence of the two groups, even though certain exposure indicators were significantly different for the two groups. In addition, the use of a Learning Group method does not lead to the discovery of a predictive law that could identify the Technical Operational Personnel as a sub-group within the overall group. (authors)

200-UP-2 Operable Unit technical baseline report

International Nuclear Information System (INIS)

Deford, D.H.

1991-02-01

This report is prepared in support of the development of a Remedial Investigation/Feasibility Study (RI/FS) Work Plan for the 200-UP-2 Operable Unit by EBASCO Environmental, Incorporated. It provides a technical baseline of the 200-UP-2 Operable Unit and results from an environmental investigation undertaken by the Technical Baseline Section of the Environmental Engineering Group, Westinghouse Hanford Company (Westinghouse Hanford). The 200-UP-2 Operable Unit Technical Baseline Report is based on review and evaluation of numerous Hanford Site current and historical reports, Hanford Site drawings and photographs and is supplemented with Hanford Site inspections and employee interviews. No field investigations or sampling were conducted. Each waste site in the 200-UP-2 Operable Unit is described separately. Close relationships between waste units, such as overflow from one to another, are also discussed. The 200-UP-2 Operable Unit consists of liquid-waste disposal sites in the vicinity of, and related to, U Plant operations in the 200 West Area of the Hanford Site. The ''U Plant'' refers to the 221-U Process Canyon Building, a chemical separations facility constructed during World War 2. It also includes the Uranium Oxide (UO 3 ) Plant, which was constructed at the same time and, like the 221-U Process Canyon Building, was later converted for other missions. Waste sites in the 200-UP-2 Operable Unit are associated with the U Plant Uranium Metal Recovery Program mission that occurred between 1952 and 1958 and the UO 3 Plant's ongoing uranium oxide mission and include one or more cribs, reverse wells, french drains, septic tanks and drain fields, trenches, catch tanks, settling tanks, diversion boxes, waste vaults, and the lines and encasements that connect them. 11 refs., 1 tab

76 FR 35864 - Proposed Priority; Special Demonstration Programs-National Technical Assistance Projects To...

Science.gov (United States)

2011-06-20

... have national significance and improve the performance of State vocational rehabilitation (VR) agencies... Centers, the American Indian Vocational Rehabilitation Technical Assistance Center, and the Independent... of each priority as absolute, competitive preference, or invitational through a notice in the Federal...

UMTRA technical assistance contractor quality assurance program plan

International Nuclear Information System (INIS)

1994-10-01

This Quality Assurance Program Plan (QAPP) provides the primary requirements for the integration of quality functions into all Technical Assistance Contractor (TAC) Project organization activities. The QAPP is the written directive authorized by the TAc Program Manager to accomplish this task and to implement procedures that provide the controls and sound management practices needed to ensure TAC contractual obligations are met. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization functions are executed in a manner that will protect public health and safety, promote the success of the Project, and meet or exceed contract requirements

Technical co-operation report for 2002. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-08-01

General Conference resolution GC(46)/RES/10 reiterated the need to strengthen the technical co- operation programme and requested the Director General to report to the Board of Governors periodically and to the General Conference at its forty-seventh (2003) session on the implementation of resolution GC(46)/RES/10. Part A of this report responds to the General Conference resolution by providing an overview of the progress achieved in technical co-operation policies, strategies, working relations, and internal management during the period 1 April 2002 to 31 March 2003, as well as the major new challenges facing the technical co-operation programme. Part B reports on operational activities and programme performance at the country and regional levels during the calendar year 2002, and Part C reviews the use of financial and human resources in the programme at an aggregate level. As part of its efforts to refine policies for improving programme development, the Agency reviewed the Technical Co-operation Strategy in 2002. The resulting document, The Technical Co-operation Strategy: the 2002 Review (document GOV/INF/2002/8/Mod.1), states that the strategic goal originally identified in the Strategy in 1997 remains valid, and defines four objectives to guide the technical co-operation programme: applying the central criterion (strong government commitment), developing strategic partnerships, increasing the level of funding for technical co-operation, and promoting greater sustainability and self-reliance of nuclear institutions. In line with the Technical Co-operation Strategy, one of the key features of the Agency.s work in 2002 was continuing consultations with Member States at both the policy and operational levels on the management of the ongoing technical co-operation programme and on planning for future activities. The dialogue with Member States aimed at clarifying the strategic objectives and key tools for the utilization of resources to achieve maximum

Training and technical assistance for compliance with beverage and physical activity components of New York City's regulations for early child care centers.

Science.gov (United States)

Kakietek, Jakub; Dunn, Lillian; O'Dell, Sarah Abood; Jernigan, Jan; Kettel Khan, Laura

2014-10-16

In 2006, the New York City Department of Health and Mental Hygiene (DOHMH) passed regulations for child care centers that established standards for beverages provided to children and set a minimum amount of time for daily physical activity. DOHMH offered several types of training and technical assistance to support compliance with the regulations. This article analyzes the association between training and technical assistance provided and compliance with the regulations in a sample of 174 group child care centers. Compliance was measured by using a site inventory of beverages stored on premises and a survey of centers' teachers regarding the amount of physical activity provided. Training and technical assistance measures were based on the DOHMH records of training and technical assistance provided to the centers in the sample and on a survey of center directors. Ordinal logistic regression was used to assess the association between training and technical assistance measures and compliance with the regulations. Measures of training related to physical activity the center received: the number of staff members who participated in Sport, Play and Active Recreation for Kids (SPARK) and other training programs in which a center participated were associated with better compliance with the physical activity regulations. Neither training nor technical assistance were associated with compliance with the regulations related to beverages. Increased compliance with regulations pertaining to physical activity was not related to compliance with beverage regulations. Future trainings should be targeted to the specific regulation requirements to increase compliance.

Technical assistance for Meharry Medical College Energy Efficiency Project. Final project status and technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-05-08

This report presents the results of a program to provide technical assistance to Meharry Medical College. The purpose of the program is to facilitate Meharry`s effort to finance a campus-wide facility retrofit. The US Department of Energy (USDOE) funded the program through a grant to the Tennessee Department of Economic and Community Development (TECD). The University of Memphis-Technology and Energy Services (UM-TES), under contract to TECD, performed program services. The report has three sections: (1) introduction; (2) project definition, financing, and participants; and (3) opportunities for federal participation.

Assessing Nurse Anaesthetists' Non-Technical Skills in the operating room.

Science.gov (United States)

Lyk-Jensen, H T; Jepsen, R M H G; Spanager, L; Dieckmann, P; Østergaard, D

2014-08-01

Incident reporting and fieldwork in operating rooms have shown that some of the errors that arise in anaesthesia relate to inadequate use of non-technical skills. To provide a tool for training and feedback on nurse anaesthetists' non-technical skills, this study aimed to adapt the Anaesthetists' Non-Technical Skills (ANTS) as a behavioural marker system for the formative assessment of nurse anaesthetists' non-technical skills in the operating room. A qualitative approach with focus group interviews was used to identify the non-technical skills of nurse anaesthetists in the operating room. The interview data were transcribed verbatim. Directed content analysis was used to code and sort data deductively into the ANTS categories: task management, team working, situation awareness and decision making. The prototype named Nurse Anaesthetists' Non-Technical Skills (N-ANTS) was presented and discussed in a group of subject matter experts to ensure face validity. The N-ANTS system consists of the same four categories as ANTS and 15 underlying elements. Three to five good and poor behavioural markers for each element were identified. The headings and definitions of the categories and elements were adjusted to encompass the behavioural markers in N-ANTS. The differences that emerged mainly reflected statements regarding the establishment of role, competence, and task delegation. A behavioural marker system, N-ANTS, for nurse anaesthetists was adapted from a behavioural marker system, ANTS, for anaesthesiologists. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Introductory statement at the Technical Assistance and Co-operation Committee of the Board of Governors. Vienna, 17 November 2003 [As delivered

International Nuclear Information System (INIS)

ElBaradei, M.

2003-01-01

The IAEA's technical co-operation (TC) programme is focused on putting advanced science to work to meet the economic and social needs of developing countries. The TC planning process is briefly discussed, including recent evaluation results; highlighting of a number of key activities; and reviewing the current status of TC implementation and funding. The areas of activity include: The use of radiotherapy in cancer treatment; isotope hydrology; monitoring coastal and marine environment; plant breeding applications. Program implementation as well as program funding is discussed. The Agency is also working to reinforce technical co-operation among developing countries (TCDC), that is, the pooling of resources and expertise in areas of mutual benefit. It is stated that the TC programme has become a powerful tool for transferring nuclear science and technology to developing countries. But only if we work together in partnership can we ensure the success of the programme. I look forward to the continuation and further development of that partnership

Organizational Structures and Processes to Support and Sustain Effective Technical Assistance in a State-Wide Multi-Tiered System of Support Initiative

Science.gov (United States)

Morrison, Julie Q.; Russell, Christine; Dyer, Stephanie; Metcalf, Terri; Rahschulte, Rebecca L.

2014-01-01

Despite the national proliferation of technical assistance as a driver for school reform and as a model for embedded and sustained professional development, very little is known about the organizational structures and processes needed to support technical assistance. The purpose of this paper is to describe a structured needs assessment process…

Automated Intelligent Assistant for mass spectrometry operation

International Nuclear Information System (INIS)

Filby, E.E.; Rankin, R.A.; Yoshida, D.E.

1991-01-01

The Automated Intelligent Assistant is designed to insure that our mass spectrometers produce timely, high-quality measurement data. The design combines instrument interfacing and expert system technology to automate an adaptable set-point damage prevention strategy. When shutdowns occur, the Assistant can help guide troubleshooting efforts. Stored real-time data will help our development program upgrade and improve the system, and also make it possible to re-run previously-observed instrument problems as ''live'' training exercises for the instrument operators. Initial work has focused on implementing the Assistant for the instrument ultra-high vacuum components. 14 refs., 5 figs

Accelerator assisted repositories, technical issue identification and economic assessment

Energy Technology Data Exchange (ETDEWEB)

Myers, T.; Favale, A.; Berwald, D. [Northrop Grumman Corp., Bethpage, NY (United States)

1995-12-31

An investigation (technical and economic) is presented to quantify the impact of accelerator assisted repository (AAR) system on the US national nuclear repository strategy. An overview of US spent fuel policy is presented which provides a means to comparatively assess competing spent fuel disposition technologies under investigation. The advantages of an AAR system are highlighted and discussed. A companion economic analysis is presented. The results indicate that although a US geologic waste repository will continue to be required, waste partitioning and accelerator transmutation of selected actinides, and long-lived fission products, can result in substantial benefits. (author) 18 refs.

Crisis assistance to nuclear operators: the manufacturer missions and methods

International Nuclear Information System (INIS)

Touati, J.

1995-01-01

Since 1985, the Framatome Company has provided to Electricite de France (EDF) a technical assistance in the case of major accident on a nuclear power plant. During the accident crisis, Framatome establishes a diagnosis and a forecast about the installation state and proposes the safest solutions to the operator for a limitation of accident consequences. Different tools have been developed by Framatome to identify the consequences of electric power outages or to control the state of coolant circuits using expert systems and a data base about reactor component characteristics. A thermo-hydraulic analysis of the accident is performed by the system, using data transmitted to the crisis center, and hypotheses about the origin of the accident are proposed by the expert. After validation, a classification of risks is established and the best strategy to follow is determined by the system, in particular when non-conventional means are required. (J.S.). 1 fig

Observation of behavioural markers of non-technical skills in the operating room and their relationship to intra-operative incidents.

Science.gov (United States)

Siu, Joey; Maran, Nikki; Paterson-Brown, Simon

2016-06-01

The importance of non-technical skills in improving surgical safety and performance is now well recognised. Better understanding is needed of the impact that non-technical skills of the multi-disciplinary theatre team have on intra-operative incidents in the operating room (OR) using structured theatre-based assessment. The interaction of non-technical skills that influence surgical safety of the OR team will be explored and made more transparent. Between May-August 2013, a range of procedures in general and vascular surgery in the Royal Infirmary of Edinburgh were performed. Non-technical skills behavioural markers and associated intra-operative incidents were recorded using established behavioural marking systems (NOTSS, ANTS and SPLINTS). Adherence to the surgical safety checklist was also observed. A total of 51 procedures were observed, with 90 recorded incidents - 57 of which were considered avoidable. Poor situational awareness was a common area for surgeons and anaesthetists leading to most intra-operative incidents. Poor communication and teamwork across the whole OR team had a generally large impact on intra-operative incidents. Leadership was shown to be an essential set of skills for the surgeons as demonstrated by the high correlation of poor leadership with intra-operative incidents. Team-working and management skills appeared to be especially important for anaesthetists in the recovery from an intra-operative incident. A significant number of avoidable incidents occur during operative procedures. These can all be linked to failures in non-technical skills. Better training of both individual and team in non-technical skills is needed in order to improve patient safety in the operating room. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Technical assistance contractor occurrence reporting and processing system

International Nuclear Information System (INIS)

1996-08-01

Members of the Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance Contractor (TAC) are responsible to notify management of TAC occurrence reporting and processing system (ORPS) classified occurrences .An ORPS occurrence is an unexpected or unplanned event on DOE property which causes bodily harm, death, damage to government property, exposure to toxic or hazardous substances above acceptable limits to workers, the environment, or general public. Examples of potential reportable occurrences include, but not limited to, site personnel exposures to airborne contaminants, incidents which could expose the general public to high levels of radiation or other contaminants, a vehicle accident resulting in property damage or personnel injuries. Listed TAC manager/staff contacts, with the assistance of TAC ORPS Program Coordinators, will determine if the occurrence is reportable under Department of Energy (DOE) Order M 232.1-2. The reportable occurrences will be classified as emergency, unusual, or off-normal. If determined to be reportable, listed TAC manager/staff will verbally report the details of the occurrence to the DOE Duty Officer within 2 hours of initial notification, and provide a written report of the event by noon the following work day

Ergonomic requirements for the operation of machines and technical equipment

Directory of Open Access Journals (Sweden)

Górny Adam

2017-01-01

Full Text Available In order to operate machinery and equipment safely, it is critical for the solutions in place to conform to design-related and operating requirements. Design-related requirements are primarily the responsibility of machine designers/developers and manufacturers. Operating requirements should be satisfied by employers, who are responsible for ensuring safe working conditions for their employees. Under applicable laws, machinery and equipment should be designed, produced and then operated without placing excessive loads on workers and in keeping with machine functionality and intended use. One should also ensure that machinery and equipment can be maintained and adjusted without exposing their operators to hazards. Ergonomic criteria are an integral part of such requirements. They ensure that human users and operators of technical equipment are enabled to function properly. Design-related requirements are viewed as a priority safety consideration. While they facilitate the use of technical tools, the actual safety of employees ultimately depends on the satisfaction of specific requirements during operation.

Electronic health records and technical assistance to improve quality of primary care: Lessons for regional extension centers.

Science.gov (United States)

Boas, Samuel J; Bishop, Tara F; Ryan, Andrew M; Shih, Sarah C; Casalino, Lawrence P

2014-07-01

In 2009, the American Recovery and Reinvestment Act apportioned $643 million for a Health Information Technology Extension Program, which established Regional Extension Centers (RECs) to support the implementation and use of electronic health records (EHRs). Little is known, however, about how RECs should assist in EHR implementation and how they should structure ongoing support. The purpose of this paper is to describe physicians' experiences with the Primary Care Information Project (PCIP), an REC run by the New York City Department of Health and Mental Hygiene. We interviewed 17 physicians enrolled in PCIP to understand the role of the EHRon quality of care and their experience with technical assistance from PCIP. All physicians stated that they felt that the EHR improved the quality of care they delivered to their patients particularly because it helped them track patients. All the physicians found technical assistance helpful but most wanted ongoing assistance months or years after they adopted the EHR. © 2013 Published by Elsevier Inc.

Process waste assessment approach, training and technical assistance for DOE contractors

International Nuclear Information System (INIS)

Pemberton, S.

1994-03-01

The Department of Energy (DOE) and its contractors are faced with a large waste management problem as are other industries. One of the tools used in a successful waste minimization pollution prevention (WMin/P2) program is a process waste assessment (PWA). The purpose of this project was to share the Kansas City Plant's (KCP's) PWA expertise with other DOE personnel and DOE contractors. This consisted of two major activities: (1) The KCP's PWA graded approach methodology was modified with the assistance of DOE/Defense Program's laboratories, and (2) PWA training and technical assistance were provided to interested DOE personnel and DOE contractors. This report documents the FY93 efforts, lesson learned, and future plans for both PWA-related activities

UMTRA project technical assistance contractor quality assurance implementation plan

International Nuclear Information System (INIS)

1994-03-01

The Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance contractor (TAC) Quality Assurance Implementation Plan (QAIP) outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QAIP is subordinate to the latest issue of the UMTRA Project TAC Quality Assurance Program Plan (QAPP) (DOE, 1993a), which was developed using US Department of Energy (DOE) Order 5700.6C quality assurance (QA) criteria. The QAIP addresses technical aspects of the TAC UMTRA Project surface and ground water programs. All QA issues in the QAIP shall comply with requirements contained in the TAC QAPP (DOE, 1933a). Because industry standards for data acquisition and data control are not addressed in DOE Order 5700.6C, the QAIP has been formatted to the 14 US Environmental Protection Agency (EPA) Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) QA requirements. DOE Order 5700.6C criteria that are not contained in the CERCLA requirements are added to the QAIP as additional requirements in Sections 15.0 through 18.0. Project documents that contain CERCLA requirements and 5700.6 criteria shall be referenced in this document to avoid duplication. Referenced documents are not included in this QAIP but are available through the UMTRA Project Document Control Center

Annual report of Department of Research Reactor and Tandem Accelerator, JFY2011. Operation, utilization and technical development of JRR-3, JRR-4, NSRR and tandem accelerator

International Nuclear Information System (INIS)

Ishii, Tetsuro; Nakamura, Kiyoshi; Kawamata, Satoshi; Ishikuro, Yasuhiro; Kawashima, Kazuhito; Kabumoto, Hiroshi; Nakamura, Takemi; Tamura, Itaru; Kawasaki, Sayuri; Sataka, Masao

2013-03-01

The Department of Research Reactors and Tandem Accelerator is in charge of the operation, utilization and technical development of JRR-3(Japan Research Reactor No.3), JRR-4(Japan Research Reactor No.4), NSRR(Nuclear Safety Research Reactor) and Tandem Accelerator. This annual report describes a summary of activities of services and technical developments carried out in the period between April 1, 2011 and March 31, 2012. The activities were categorized into six service/development fields: (1) Recovery from the Great East Japan Earthquake, (2) Operation and maintenance of research reactors and tandem accelerator, (3) Utilization of research reactors and tandem accelerator, (4) Upgrading of utilization techniques of research reactors and tandem accelerator, (5) Safety administration for research reactors and tandem accelerator, (6) International cooperation. Also contained are lists of publications, meetings, granted permissions on lows and regulations concerning atomic energy, number of staff members dispatched to Fukushima for the technical assistance, commendation, outcomes in service and technical developments and so on. (author)

Outlook for the IAEA's technical co-operation programme

International Nuclear Information System (INIS)

Samiei, Massoud

1998-01-01

This is a slide presentation dealing with the following subjects: - the IAEA's programmes; - the technical co-operation programme; - past trends in the TC programme; - new initiatives in TC; - TC programme profile; - perspectives for the future. The major programmes conducted by IAEA are concerning: - nuclear power and fuel cycle; - nuclear applications; - nuclear, radiation and waste safety, nuclear verification and security material; - management of technical co-operation; - policy making, coordination and support. In relation with the IAEA role in development process the author presents the legal framework for TC, the programme structure, and programme areas, resources, budgets, cycle, approval and implementation. Two plots regarding the recipients with and without NPP's are displayed for the period 1980-1994. Also, according to the status of the member states (without and with nuclear power programme) the programme priorities are presented. For the first case these are: radiation and waste safety, food and agriculture, water resources management human health and nutrition, human resources development, environmental protection and industrial applications. For the second case there are mentioned: radiation and nuclear safety, nuclear power operation and maintenance management, radioactive waste management, environment protection and sustainable energy options. Concerning the regional distribution the following figures are given for 1997: West Asia, 9%; Europe, 18%; Inter-regional, 11%; Africa, 24%; Latin America, 21%; East Asia and Pacific, 17%. In conclusion, the hope is expressed that the value of Technical Co-operation Programme would be seen not only in the successful transfer of technology but also, in the way that the nuclear technologies may satisfy demands for sustainable development by having a lasting impact on the life of the majority in a cost effective and environmentally sound manner

Technical Assistance and Program Support: DoD Historical Black Colleges and Universities and Minority Institutions Program

National Research Council Canada - National Science Library

Andrews, Aaron

2003-01-01

... (His), the United Negro College Fund Special Programs developed and implemented a comprehensive technical assistance and infrastructure program This program has provided HBCUs, HSIs, TCUs, and MIs...

Non-technical skills of the operating theatre scrub nurse: literature review.

Science.gov (United States)

Mitchell, Lucy; Flin, Rhona

2008-07-01

This paper is a report of a review to identify the non-technical (cognitive and social) skills used by scrub nurses. Recognition that failures in non-technical skills contributed to accidents in high-risk industries led to the development of research programmes to study the role of cognition and social interactions in operational safety. Recently, psychological research in operating theatres has revealed the importance of non-technical skills in safe and efficient performance. Most of the studies to date have focused on anaesthetists and surgeons. On-line sources and university library catalogues, publications of the Association for Perioperative Practice, National Association of Theatre Nurses and Association of Peri-Operative Registered Nurses were searched in 2007. Studies were included in the review if they presented data from scrub nurses on one or more of their non-technical skills. These findings were examined in relation to an existing medical non-technical skills framework with categories of communication, teamwork, leadership, situation awareness and decision-making. Of 424 publications retrieved, 13 were reviewed in detail. Ten concerned communication and eight of those also had data on teamwork. In 11 papers teamwork was examined, and one focused on nurses' situation awareness, teamwork and communication. None of the papers we reviewed examined leadership or decision-making by scrub nurses. Further work is needed to identify formally the non-technical skills which are important to the role of scrub nurse and then to design training in the identified non-technical skills during the education and development of scrub nurses.

Technical Diagnostics of Ventilation Units for Energy Efficiency and Safety of Operation

Directory of Open Access Journals (Sweden)

Kuzin Evgeny

2017-01-01

Full Text Available The article considers the questions of application of technical diagnostics fan installations methods for providing safe operation, the system of the technical maintenance improvement and repair. Due to the feet that one of the most important aspects in fan operation in mining is energy efficiency and energy saving, the lack of the data in the control of the level in vibration of stationary sensors is shown. The necessity of taking into account the geometric parameters of the intake channel has been shown, and also the necessity of creation of the reference masks for the assessment of technical condition and energy efficiency when operating fan installations in mining. The results of technical diagnostics of the main fans using the methods of vibration diagnostics are provided. Aspects of vibration at characteristic points are shown. The necessity for further accumulation of data characterizing vibration for adjustment of the reference masks and more accurate detection of defects and deviations from the energy-efficient mode of operation of the fan installations is given.

Technical Diagnostics of Ventilation Units for Energy Efficiency and Safety of Operation

Science.gov (United States)

Kuzin, Evgeny; Shahmanov, Vitality; Dubinkin, Dmitriy

2017-11-01

The article considers the questions of application of technical diagnostics fan installations methods for providing safe operation, the system of the technical maintenance improvement and repair. Due to the feet that one of the most important aspects in fan operation in mining is energy efficiency and energy saving, the lack of the data in the control of the level in vibration of stationary sensors is shown. The necessity of taking into account the geometric parameters of the intake channel has been shown, and also the necessity of creation of the reference masks for the assessment of technical condition and energy efficiency when operating fan installations in mining. The results of technical diagnostics of the main fans using the methods of vibration diagnostics are provided. Aspects of vibration at characteristic points are shown. The necessity for further accumulation of data characterizing vibration for adjustment of the reference masks and more accurate detection of defects and deviations from the energy-efficient mode of operation of the fan installations is given.

Results from Consultancy Meeting on Qualified Technical Centres

International Nuclear Information System (INIS)

Novakovic, Mladen

2017-01-01

Qualified Technical Centres (QTC) - Current Situation: •Many Member States (MS) need help dealing with DSRS; •Most seek assistance, which can include funding, through the IAEA; •Technical assistance is provided by various governmental organization and private companies (service providers = SP). QTC - Method of Delivery Numerous MS requests are pressing the IAEA’s capacity to assist: •Use qualified internal and external experts/contractors; •Limited pool for DSRS and need to expand; •Dedicated and specialized equipment; •Mobile hot cell; •Mobile tool kit; •Field operations; •Coordinated approach with Nuclear Security and Safety. Qualified Technical Centres for the Management of DSRS: •The challenge is to scale up the support for safe and secure management of DSRS; •Strengthen existing capacity of some MS to support others and make support more sustainable; •Expands the support that can be readily provided and meet the many needs of MS

Technical assistance to Ohio closure sites; Recommendations toaddress contaminated soils, concrete, and corrective action managementunit/groundwater contamination at Ashtabula, Ohio

Energy Technology Data Exchange (ETDEWEB)

Charoglu, Emily; Eddy-Dilek, Carol; Gombert, Dirk; Hazen, Terry; Johnson, Bob; Looney, Brian; Krstich, Michael A.; Rautman, Chris; Tripp,Julia; Whitmill, Larry

2002-08-26

The Ashtabula Environmental Management Project (AEMP) at Department of Energy-Ohio (DOE-OH) requested technical assistance from the EM-50 Lead Lab to aid in defining new cost and time effective approaches in the following problem areas: soils, concrete, and groundwater/Corrective Action Management Unit (CAMU) at RMIES in Ashtabula, Ohio. Attachment 1 provides the site request for assistance. The technical assistance team assembled for this request is provided in Attachment 2. These individuals reviewed key site information prior to convening with DOE and contractor personnel (RMIES and Earthline) for a three-and-a-half-day meeting to better understand baseline technologies, limitations, and site-specific issues. After listening to presentations about the nature and extent of known contamination, the team broke out into several groups to brainstorm ideas and develop viable solutions. This executive summary details unresolved issues requiring management attention as well as recommendations to address soils, concrete, and groundwater/CAMU. It also provides a summary of additional technical assistance that could be provided to the site. More details are presented in the body of this report.

Sources of transportation expertise by selected technical areas

International Nuclear Information System (INIS)

1987-01-01

The US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) has assigned components of its Waste Transportation Program to three of the DOE Operations offices. The DOE Oak Ridge Operations Office (ORO) is responsible for the transportation operations design, development, acquisition, testing, implementation, and program management, including the equipment, facilities, and services of the transportation system. Within ORO, the OCRWM transportation component is assigned to the Transportation Operations Project Office (TOPO). The specific activities involved in the ORO/TOPO include procurement, operational testing, inspection, logistics, interfaces, maintenance, management and improvements, and system operation. Oak Ridge Associated Universities (ORAU) has developed (and will maintain and enhance) a data base of sources of transportation expertise in selected technical areas for ORO. The data base includes individuals and organizations who have indicated that they have capabilities and interest in assisting ORO in the design, development, implementation, and management of the OCRWM transportation system. This assistance might be in the form of consulting or subcontract work and/or participation in peer review panels, technical evaluation committees, workshops, advisory groups, etc. This initial project was completed in the four month period of January 30, 1987 through May 31, 1987

Coaching Non-technical Skills Improves Surgical Residents' Performance in a Simulated Operating Room.

Science.gov (United States)

Yule, Steven; Parker, Sarah Henrickson; Wilkinson, Jill; McKinley, Aileen; MacDonald, Jamie; Neill, Adrian; McAdam, Tim

2015-01-01

To investigate the effect of coaching on non-technical skills and performance during laparoscopic cholecystectomy in a simulated operating room (OR). Non-technical skills (situation awareness, decision making, teamwork, and leadership) underpin technical ability and are critical to the success of operations and the safety of patients in the OR. The rate of developing assessment tools in this area has outpaced development of workable interventions to improve non-technical skills in surgical training and beyond. A randomized trial was conducted with senior surgical residents (n = 16). Participants were randomized to receive either non-technical skills coaching (intervention) or to self-reflect (control) after each of 5 simulated operations. Coaching was based on the Non-Technical Skills For Surgeons (NOTSS) behavior observation system. Surgeon-coaches trained in this method coached participants in the intervention group for 10 minutes after each simulation. Primary outcome measure was non-technical skills, assessed from video by a surgeon using the NOTSS system. Secondary outcomes were time to call for help during bleeding, operative time, and path length of laparoscopic instruments. Non-technical skills improved in the intervention group from scenario 1 to scenario 5 compared with those in the control group (p = 0.04). The intervention group was faster to call for help when faced with unstoppable bleeding in the final scenario (no. 5; p = 0.03). Coaching improved residents' non-technical skills in the simulated OR compared with those in the control group. Important next steps are to implement non-technical skills coaching in the real OR and assess effect on clinically important process measures and patient outcomes. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Prototype for an automated technical specification information system

International Nuclear Information System (INIS)

Quinn, E.L.; Mills, R.H.; Groves, J.E.

1985-01-01

The Southern California Edison (SCE) Automated Technical Specification Information System (ATSIS) at the San Onofre nuclear generating station (SONGS) has been developed as a prototype for an on-line information management system. This system provides an appropriate level of update, inquiry, and report generation capabilities to help support plant operators at SONGS in their efforts to anticipate, identify, document, and track certain actions and activities associated with plant technical specifications and associated limiting conditions of operation (LCOs). Substantially increased emphasis is being placed on adherence to nuclear regulatory requirements and commitments contained on the operating licenses of nuclear power plants. Additionally, as each year passes, such requirements are becoming increasingly detailed and complex, making it more and more difficult to track and ensure total compliance with the many and varied requirements. To assist the operations department at SONGs in meeting their regulatory commitments, in January 1985 SCE commenced gathering together the leading technical expertise available in the industry to develop a computerized system to track all technical specification-related equipment for operability and impact on LCOs

Operating experience feedback report: Technical specifications: Commercial power reactors

International Nuclear Information System (INIS)

O'Reilly, P.D.; Plumlee, G.L. III.

1989-03-01

This report documents a trends and patterns analysis of technical specification (TS)-related licensee event reports (LERs) conducted by the Nuclear Regulatory Commission's (NRC's) Office for Analysis and Evaluation of Operational Data (AEOD). The objectives of this analysis were (1) to identify and catalog technical specification-related LERs, (2) to categorize and evaluate the events reported in these a LERs, (3) to identify any issues arising from the evaluation which appear to have generic safety significance, or which relate to the on-going Technical Specification Improvement Program, and (4) to trend the results obtained from the analysis of the data obtained in (1) through (3). 9 refs., 9 figs., 22 tabs

76 FR 63628 - Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR)

Science.gov (United States)

2011-10-13

...] Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR) AGENCY: Federal... Individual Assistance Operations Manual (9327.2-PR). DATES: Comments must be received by November 14, 2011... of the draft Preliminary Damage Assessment for Individual Assistance Operations Manual (9327.2-PR) on...

Shift technical advisors: in the eyes of the NRC

International Nuclear Information System (INIS)

Crocker, L.P.

1981-01-01

Since January 1, 1980, the NRC has required that Shift Technical Advisors be on-shift at all operating nuclear power plants. The objective of the requirement is to assure that technical expertise is immediately available to each operating shift to assess off-normal events and to provide advice to control room personnel. Further, this advice and assistance is to be provided by an individual not responsible for control manipulations or for directing the activities of reactor operators. The long-term requirement for on-shift technical expertise is firm. However, the exact manner in which this expertise must be furnished has not been determined. Licensees have proposed various alternatives to meet this requirement. These proposals still are being reviewed by the NRC staff

77 FR 37390 - Notice Inviting Informal Public Comment on Training and Technical Assistance and Disability...

Science.gov (United States)

2012-06-21

... and Technical Assistance and Disability Inclusion Programming AGENCY: Corporation for National and... Disability Inclusion Programming; correction. SUMMARY: The Corporation for National and Community Service... Disability Inclusion Programming that appeared in the Federal Register of June 11, 2012 (75 FR 34354). That...

[Change management: An analysis of actors; perceptions about technical assistance in the Democratic Republic of Congo].

Science.gov (United States)

Ribesse, Nathalie; Iyeti, Alain; Macq, Jean

2015-01-01

Technical assistance (TA) is a common component of health system strengthening interventions. This type of intervention is too often designed and evaluated according to a logic that fails to take into account social complexity. Actors' perceptions are one element of this complexity. This article presents a study conducted in the Democratic Republic of Congo designed to identify perceptions concerning two types of technical support providers for health system strengthening: long-term technical assistants (agents of development agencies) and provincial technical advisors (agents of the Ministry of Health). Interviews were conducted with an innovative tool inspired by the principles of systems thinking. Interviewees were actors involved in a TA intervention in the province of Bandundu. Their expectations regarding TA providers were identified in terms of personal characteristics (knowledge, know-how and interpersonal skills), roles, and styles of interaction for capacity building ("interventionist/ prescriptive axes"). Interviewees emphasized the importance of mutual learning and the quality of interactions, which depends on TA provider's interpersonal skills and mutual willingness. Perceptions of TA provider's characteristics tend to be similar, but several differences were observed concerning the expectations about the roles of TAs, and the style that should be adopted for capacity building. Ignoring these differences in expectations may be a threat to the effectiveness of TA.

75 FR 21349 - Solicitation for a Cooperative Agreement-Evaluation of Technical Assistance for Evidence-Based...

Science.gov (United States)

2010-04-23

... Criminal Justice Systems (the Framework), which is designed to advance constructive change in local level... analysis plan; Develop data collection instruments to include site visit protocols, structured or semi...--Evaluation of Technical Assistance for Evidence-Based Decisionmaking in Local Criminal Justice Systems AGENCY...

IAEA technical co-operation activities in the 1990s

International Nuclear Information System (INIS)

1995-01-01

The desire to extend the many benefits of the peaceful uses of nuclear technology to all countries led as long ago as 1957 to the establishment of the IAEA and to immediate introduction of a technical co-operation programme. In the more than thirty years that have passed since that time, the potential applications of nuclear techniques have greatly expanded. Over the period, many of the applications have moved from research laboratories into hospitals, farms and industrial enterprises. The direct resources made available to the IAEA by its Member States to support technology transfer processes have grown rapidly since the late 1950s. The current trends in the technical co-operation activities of the IAEA and some examples of projects supported by the IAEA are briefly presented in this document

IAEA technical co-operation and the NPT

International Nuclear Information System (INIS)

Velez Ocon, C.

1985-01-01

The IAEA technical co-operation programme promotes nuclear techniques and technologies in the developing countries. The Statute, the NPT, and the Revised Guiding Principles all reflect the desire of countries to foster an international climate where it will be unacceptable for a non-nuclear-weapon State to indulge in the development of military nuclear technology and reprehensible for States possessing this technology to offer it to others

Technical Co-operation Report for 1996. Report by the Director General

International Nuclear Information System (INIS)

1997-01-01

The Agency's Technical Cooperation (TC) Programme made further progress during 1996 in implementing recent initiatives to strengthen efficiency and effectiveness. These initiatives seek to maximize the developmental contribution of counterpart institutions by emphasizing the management of technology to solve social and economic problems. The new direction has been embodied in the term ''Partners in Development''. The Partners in Development approach is reflected in last year's Report to the Board of Governors and the General Conference on Strengthening of the Agency's Technical Co-operation Activities, which provided an update on ongoing activities and elaborated new initiatives. The 1995 Technical Cooperation Report focused on the progress in implementing these initiatives. Next year, the Secretariat plans to combine the TC Report with the Report on Strengthening of the Agency's Technical Co-operation Activities in order to improve the clarity, consistency and economy of these presentations. Establishing a development partnership with Member States is the central goal of a new Strategy for TC. The refinement of this strategy required considerable effort during 1996, when the process first began to define objectives, targets and the means of accomplishing them. Alongside internal consultations, the role of SAGTAC became instrumental in reaching consensus on the main elements of the strategy. Future efforts include the formulation of implementation plans for the strategy. Once completed, the strategy will be presented to the TACC and Board in 1997. Reflecting these developments, section A of this Report presents the basic features of the TC Strategy, and the approach to be taken to achieve its objectives. The Strategy addresses among others the recommendations contained in resolution GC(40)/RES/13 on the Strengthening of Technical Co-operation: activities to improve the scientific and technological capabilities of developing countries; to achieve sustainable

MATHEMATICAL MODELS OF PROCESSES AND SYSTEMS OF TECHNICAL OPERATION FOR ONBOARD COMPLEXES AND FUNCTIONAL SYSTEMS OF AVIONICS

Directory of Open Access Journals (Sweden)

Sergey Viktorovich Kuznetsov

2017-01-01

Full Text Available Modern aircraft are equipped with complicated systems and complexes of avionics. Aircraft and its avionics tech- nical operation process is observed as a process with changing of operation states. Mathematical models of avionics pro- cesses and systems of technical operation are represented as Markov chains, Markov and semi-Markov processes. The pur- pose is to develop the graph-models of avionics technical operation processes, describing their work in flight, as well as during maintenance on the ground in the various systems of technical operation. The graph-models of processes and sys- tems of on-board complexes and functional avionics systems in flight are proposed. They are based on the state tables. The models are specified for the various technical operation systems: the system with control of the reliability level, the system with parameters control and the system with resource control. The events, which cause the avionics complexes and func- tional systems change their technical state, are failures and faults of built-in test equipment. Avionics system of technical operation with reliability level control is applicable for objects with constant or slowly varying in time failure rate. Avion- ics system of technical operation with resource control is mainly used for objects with increasing over time failure rate. Avionics system of technical operation with parameters control is used for objects with increasing over time failure rate and with generalized parameters, which can provide forecasting and assign the borders of before-fail technical states. The pro- posed formal graphical approach avionics complexes and systems models designing is the basis for models and complex systems and facilities construction, both for a single aircraft and for an airline aircraft fleet, or even for the entire aircraft fleet of some specific type. The ultimate graph-models for avionics in various systems of technical operation permit the beginning of

Non-technical skills of surgeons and anaesthetists in simulated operating theatre crises.

Science.gov (United States)

Doumouras, A G; Hamidi, M; Lung, K; Tarola, C L; Tsao, M W; Scott, J W; Smink, D S; Yule, S

2017-07-01

Deficiencies in non-technical skills (NTS) have been increasingly implicated in avoidable operating theatre errors. Accordingly, this study sought to characterize the impact of surgeon and anaesthetist non-technical skills on time to crisis resolution in a simulated operating theatre. Non-technical skills were assessed during 26 simulated crises (haemorrhage and airway emergency) performed by surgical teams. Teams consisted of surgeons, anaesthetists and nurses. Behaviour was assessed by four trained raters using the Non-Technical Skills for Surgeons (NOTSS) and Anaesthetists' Non-Technical Skills (ANTS) rating scales before and during the crisis phase of each scenario. The primary endpoint was time to crisis resolution; secondary endpoints included NTS scores before and during the crisis. A cross-classified linear mixed-effects model was used for the final analysis. Thirteen different surgical teams were assessed. Higher NTS ratings resulted in significantly faster crisis resolution. For anaesthetists, every 1-point increase in ANTS score was associated with a decrease of 53·50 (95 per cent c.i. 31·13 to 75·87) s in time to crisis resolution (P technical skills scores were lower during the crisis phase of the scenarios than those measured before the crisis for both surgeons and anaesthetists. A higher level of NTS of surgeons and anaesthetists led to quicker crisis resolution in a simulated operating theatre environment. © 2017 BJS Society Ltd Published by John Wiley & Sons Ltd.

Annual report of Department of Research Reactor and Tandem Accelerator, JFY2012. Operation, utilization and technical development of JRR-3, JRR-4, NSRR, Tandem Accelerator and RI Production Facility

International Nuclear Information System (INIS)

Murayama, Yoji; Ishii, Tetsuro; Nakamura, Kiyoshi; Uno, Yuki; Ishikuro, Yasuhiro; Kawashima, Kazuhito; Ishizaki, Nobuhiro; Matsumura, Taichi; Nagahori, Kazuhisa; Odauchi, Shouji; Maruo, Takeshi

2014-03-01

The Department of Research Reactor and Tandem Accelerator is in charge of the operation, utilization and technical development of JRR-3(Japan Research Reactor No.3), JRR-4(Japan Research Reactor No.4), NSRR(Nuclear Safety Research Reactor), Tandem Accelerator and RI Production Facility. This annual report describes a summary of activities of services and technical developments carried out in the period between April 1, 2012 and March 31, 2013. The activities were categorized into five service/development fields: (1) Operation and maintenance of research reactors and tandem accelerator, (2) Utilization of research reactors and tandem accelerator, (3) Upgrading of utilization techniques of research reactors and tandem accelerator, (4) Safety administration for department of research reactor and tandem accelerator, (5) International cooperation. Also contained are lists of publications, meetings, granted permissions on laws and regulations concerning atomic energy, number of staff members dispatched to Fukushima for the technical assistance, outcomes in service and technical developments and so on. (author)

The Mission Operations Planning Assistant

Science.gov (United States)

Schuetzle, James G.

1987-01-01

The Mission Operations Planning Assistant (MOPA) is a knowledge-based system developed to support the planning and scheduling of instrument activities on the Upper Atmospheric Research Satellite (UARS). The MOPA system represents and maintains instrument plans at two levels of abstraction in order to keep plans comprehensible to both UARS Principal Investigators and Command Management personnel. The hierarchical representation of plans also allows MOPA to automatically create detailed instrument activity plans from which spacecraft command loads may be generated. The MOPA system was developed on a Symbolics 3640 computer using the ZetaLisp and ART languages. MOPA's features include a textual and graphical interface for plan inspection and modification, recognition of instrument operational constraint violations during the planning process, and consistency maintenance between the different planning levels. This paper describes the current MOPA system.

Program Assistant | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Job Summary Under the direction of the Program Leader, the Program ... of the operations of the Program, and assists with information management the team. ... and distribution of documents and providing the necessary technical devices;; Takes ... mailings or distribution;; Prepares training kits or information packages and ...

78 FR 39260 - Applications for New Awards; Technical Assistance and Dissemination To Improve Services and...

Science.gov (United States)

2013-07-01

... collaborative network of State deaf-blind TA projects. Using advances in communication and social media, the... their academic and social outcomes; empower children who are deaf-blind to engage in self-advocacy so... Improve Services and Results for Children With Disabilities--State Technical Assistance Projects To...

77 FR 36501 - Applications for New Awards: Technical Assistance and Dissemination To Improve Services and...

Science.gov (United States)

2012-06-19

... consumers on the Center's Web site, as required under paragraph (a)(1)(i) in the Technical Assistance and... components needed to support the use and sustainability of effective services and evidence-based..., guidance, implementation tools, and other materials at no cost to the consumer on: (A) Current...

Environmental Measurements Laboratory fiscal year 1998: Accomplishments and technical activities

Energy Technology Data Exchange (ETDEWEB)

Erickson, M.D.

1999-01-01

The Environmental Measurements Laboratory (EML) is government-owned, government-operated, and programmatically under the DOE Office of Environmental Management. The Laboratory is administered by the Chicago Operations Office. EML provides program management, technical assistance and data quality assurance for measurements of radiation and radioactivity relating to environmental restoration, global nuclear nonproliferation, and other priority issues for the Department of Energy, as well as for other government, national, and international organizations. This report presents the technical activities and accomplishments of EML for Fiscal Year 1998.

ENIKO MIFI theses for discussion on implementation of training assistance

International Nuclear Information System (INIS)

Kucherenko, A.A.; Kazennov, A.Yu

1993-01-01

One of the important roles of the IAEA is to assist countries on technical co-operation on training personnel in various fields of nuclear power plant operation. This document presents considerations and recommendations concerning recipient countries needs in the improvement of training system. 3 tabs

Three-Dimensional Path Planning Software-Assisted Transjugular Intrahepatic Portosystemic Shunt: A Technical Modification

Energy Technology Data Exchange (ETDEWEB)

Tsauo, Jiaywei, E-mail: 80732059@qq.com; Luo, Xuefeng, E-mail: luobo-913@126.com [West China Hospital of Sichuan University, Institute of Interventional Radiology (China); Ye, Linchao, E-mail: linchao.ye@siemens.com [Siemens Ltd, Healthcare Sector (China); Li, Xiao, E-mail: simonlixiao@gmail.com [West China Hospital of Sichuan University, Institute of Interventional Radiology (China)

2015-06-15

PurposeThis study was designed to report our results with a modified technique of three-dimensional (3D) path planning software assisted transjugular intrahepatic portosystemic shunt (TIPS).Methods3D path planning software was recently developed to facilitate TIPS creation by using two carbon dioxide portograms acquired at least 20° apart to generate a 3D path for overlay needle guidance. However, one shortcoming is that puncturing along the overlay would be technically impossible if the angle of the liver access set and the angle of the 3D path are not the same. To solve this problem, a prototype 3D path planning software was fitted with a utility to calculate the angle of the 3D path. Using this, we modified the angle of the liver access set accordingly during the procedure in ten patients.ResultsFailure for technical reasons occurred in three patients (unsuccessful wedged hepatic venography in two cases, software technical failure in one case). The procedure was successful in the remaining seven patients, and only one needle pass was required to obtain portal vein access in each case. The course of puncture was comparable to the 3D path in all patients. No procedure-related complication occurred following the procedures.ConclusionsAdjusting the angle of the liver access set to match the angle of the 3D path determined by the software appears to be a favorable modification to the technique of 3D path planning software assisted TIPS.

The non-technical skills used by anaesthetic technicians in critical incidents reported to the Australian Incident Monitoring System between 2002 and 2008.

Science.gov (United States)

Rutherford, J S; Flin, R; Irwin, A

2015-07-01

The outcome of critical incidents in the operating theatre has been shown to be influenced by the behaviour of anaesthetic technicians (ATs) assisting anaesthetists, but the specific non-technical skills involved have not been described. We performed a review of critical incidents (n=1433) reported to the Australian Incident Monitoring System between 2002 and 2008 to identify which non-technical skills were used by ATs. The reports were assessed if they mentioned anaesthetic assistance or had the boxes ticked to identify "inadequate assistance" or "absent supervision or assistance". A total of 90 critical incidents involving ATs were retrieved, 69 of which described their use of non-technical skills. In 20 reports, the ATs ameliorated the critical incident, whilst in 46 they exacerbated the critical incident, and three cases had both positive and negative non-technical skills described. Situation awareness was identified in 39 reports, task management in 23, teamwork in 21 and decision-making in two, but there were no descriptions of issues related to leadership, stress or fatigue management. Situation awareness, task management and teamwork appear to be important non-technical skills for ATs in the development or management of critical incidents in the operating theatre. This analysis has been used to support the development of a non-technical skills taxonomy for anaesthetic assistants.

UMTRA project technical assistance contractor quality assurance implementation plan for surface and ground water

International Nuclear Information System (INIS)

1994-09-01

The Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance Contractor (TAC) Quality Assurance Implementation Plan (QAIP) outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QAIP is subordinate to the latest issue of the UMTRA Project TAC Quality Assurance Program Plan (QAPP). The QAIP addresses technical aspects of the TAC UMTRA Project surface and ground water programs. The QAIP is authorized and approved by the TAC Project Manager and QA manager. The QA program is designed to use monitoring, audit, and surveillance functions as management tools to ensure that all Project organization activities are carried out in a manner that will protect public health and safety, promote the success of the UMTRA Project and meet or exceed contract requirements

25 CFR 30.111 - When should the tribal governing body or school board request technical assistance?

Science.gov (United States)

2010-04-01

... maximize the time the tribal governing body or school board has to develop an alternative definition of AYP... should request technical assistance before formally notifying the Secretary of its intention to waive the Secretary's definition of AYP. Approval of Alternative Definition ...

200-BP-5 operable unit Technical Baseline report

International Nuclear Information System (INIS)

Jacques, I.D.; Kent, S.K.

1991-10-01

This report supports development of a remedial investigation/feasibility study work plan for the 200-BP-5 operable unit. The report summarizes baseline information for waste sites and unplanned release sites located in the 200-BP-5 operable unit. The sites were investigated by the Technical Baseline Section of the Environmental Engineering Group, Westinghouse Hanford Company (Westinghouse Hanford). The investigation consisted of review and evaluation of current and historical Hanford Site reports, drawings, and photographs, and was supplemented with recent inspections of the Hanford Site and employee interviews. No field investigations or sampling were conducted

Manpower development for safe operation of nuclear power plant. China. Seminar on the technical support functions. Activity: 6.1.1-Task-03. Technical report

International Nuclear Information System (INIS)

Groom, S.H.

1994-01-01

The workshop which was intended to present operating experiences from utilities with a wide range of numbers of operating nuclear units. The speaker, S.H. Groom, presented N.B. Power's experience with a single nuclear unit, and intended to: Present the objectives, organization, and scope of work of the central and site Technical Service groups within N.B. Power which support the operation of the Point Lepreau NGS; Define responsibilities of, and interfaces between the on-site and the central technical service staff; Recommend methods for the establishment and maintenance of an efficient technical support group for the operation of any nuclear power plant

New operator assistance features in the CMS Run Control System

Science.gov (United States)

Andre, J.-M.; Behrens, U.; Branson, J.; Brummer, P.; Chaze, O.; Cittolin, S.; Contescu, C.; Craigs, B. G.; Darlea, G.-L.; Deldicque, C.; Demiragli, Z.; Dobson, M.; Doualot, N.; Erhan, S.; Fulcher, J. R.; Gigi, D.; Gładki, M.; Glege, F.; Gomez-Ceballos, G.; Hegeman, J.; Holzner, A.; Janulis, M.; Jimenez-Estupiñán, R.; Masetti, L.; Meijers, F.; Meschi, E.; Mommsen, R. K.; Morovic, S.; O'Dell, V.; Orsini, L.; Paus, C.; Petrova, P.; Pieri, M.; Racz, A.; Reis, T.; Sakulin, H.; Schwick, C.; Simelevicius, D.; Vougioukas, M.; Zejdl, P.

2017-10-01

During Run-1 of the LHC, many operational procedures have been automated in the run control system of the Compact Muon Solenoid (CMS) experiment. When detector high voltages are ramped up or down or upon certain beam mode changes of the LHC, the DAQ system is automatically partially reconfigured with new parameters. Certain types of errors such as errors caused by single-event upsets may trigger an automatic recovery procedure. Furthermore, the top-level control node continuously performs cross-checks to detect sub-system actions becoming necessary because of changes in configuration keys, changes in the set of included front-end drivers or because of potential clock instabilities. The operator is guided to perform the necessary actions through graphical indicators displayed next to the relevant command buttons in the user interface. Through these indicators, consistent configuration of CMS is ensured. However, manually following the indicators can still be inefficient at times. A new assistant to the operator has therefore been developed that can automatically perform all the necessary actions in a streamlined order. If additional problems arise, the new assistant tries to automatically recover from these. With the new assistant, a run can be started from any state of the sub-systems with a single click. An ongoing run may be recovered with a single click, once the appropriate recovery action has been selected. We review the automation features of CMS Run Control and discuss the new assistant in detail including first operational experience.

New Operator Assistance Features in the CMS Run Control System

Energy Technology Data Exchange (ETDEWEB)

Andre, J.M.; et al.

2017-11-22

During Run-1 of the LHC, many operational procedures have been automated in the run control system of the Compact Muon Solenoid (CMS) experiment. When detector high voltages are ramped up or down or upon certain beam mode changes of the LHC, the DAQ system is automatically partially reconfigured with new parameters. Certain types of errors such as errors caused by single-event upsets may trigger an automatic recovery procedure. Furthermore, the top-level control node continuously performs cross-checks to detect sub-system actions becoming necessary because of changes in configuration keys, changes in the set of included front-end drivers or because of potential clock instabilities. The operator is guided to perform the necessary actions through graphical indicators displayed next to the relevant command buttons in the user interface. Through these indicators, consistent configuration of CMS is ensured. However, manually following the indicators can still be inefficient at times. A new assistant to the operator has therefore been developed that can automatically perform all the necessary actions in a streamlined order. If additional problems arise, the new assistant tries to automatically recover from these. With the new assistant, a run can be started from any state of the sub-systems with a single click. An ongoing run may be recovered with a single click, once the appropriate recovery action has been selected. We review the automation features of CMS Run Control and discuss the new assistant in detail including first operational experience.

78 FR 1823 - Cable Television Technical and Operational Requirements

Science.gov (United States)

2013-01-09

... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 79 [MB Docket No. 12-217; DA 12-2081] Cable Television Technical and Operational Requirements AGENCY: Federal Communications Commission. ACTION: Proposed rule; extension of reply comment period. SUMMARY: In this document, the Commission extends the deadline...

Training for single port video assisted thoracoscopic surgery lung resections.

Science.gov (United States)

McElnay, Philip J; Lim, Eric

2015-11-01

With many surgical training programmes providing less time for training it can be challenging for trainees to acquire the necessary surgical skills to perform complex video assisted thoracoscopic surgery (VATS) lung resections. Indeed as the utilization of single port operations increases the need to approach the operating theatre with already-existing excellent hand-eye coordination skills increases. We suggest that there are a number of ways that trainees can begin to develop these necessary skills. Firstly, using computer games that involve changing horizons and orientations. Secondly, utilizing box-trainers to practice using the thoracoscopic instruments. Thirdly, learning how essential tools such as the stapler work. Trainees will then be able to progress to meaningfully assisting in theatre and indeed learning how to perform the operation themselves. At this stage is useful to observe expert surgeons whilst they operate-to watch both their technical and non-technical skills. Ultimately, surgery is a learned skill and requires implementation of these techniques over a sustained period of time.

Guide to Federal Funding, Financing, and Technical Assistance for Plug-in Electric Vehicles and Charging Stations

Energy Technology Data Exchange (ETDEWEB)

None, None

2016-07-29

The U.S. Department of Energy and the U.S. Department of Transportation have published a guide to highlight examples of federal support and technical assistance for plug-in electric vehicles (PEVs) and charging stations. The guide provides a description of each opportunity and a point of contact to assist those interested in advancing PEV technology. The Department of Energy’s Alternative Fuels Data Center provides a comprehensive database of federal and state programs that support plug-in electric vehicles and infrastructure.

Assessment of training and technical assistance needs of Colorectal Cancer Control Program Grantees in the U.S.

Science.gov (United States)

Escoffery, Cam; Hannon, Peggy; Maxwell, Annette E; Vu, Thuy; Leeman, Jennifer; Dwyer, Andrea; Mason, Caitlin; Sowles, Shaina; Rice, Ketra; Gressard, Lindsay

2015-01-31

Practitioners often require training and technical assistance to build their capacity to select, adapt, and implement evidence-based interventions (EBIs). The CDC Colorectal Cancer Control Program (CRCCP) aims to promote CRC screening to increase population-level screening. This study identified the training and technical assistance (TA) needs and preferences for training related to the implementation of EBIs among CRCCP grantees. Twenty-nine CRCCP grantees completed an online survey about their screening activities, training and technical assistance in 2012. They rated desire for training on various evidence-based strategies to increase cancer screening, evidence-based competencies, and program management topics. They also reported preferences for training formats and facilitators and barriers to trainings. Many CRCCP grantees expressed the need for training with regards to specific EBIs, especially system-level and provider-directed EBIs to promote CRC screening. Grantees rated these EBIs as more difficult to implement than client-oriented EBIs. Grantees also reported a moderate need for training regarding finding EBIs, assessing organizational capacity, implementing selected EBIs, and conducting process and outcome evaluations. Other desired training topics reported with higher frequency were partnership development and data collection/evaluation. Grantees preferred training formats that were interactive such as on-site trainings, webinars or expert consultants. Public health organizations need greater supports for adopting evidence-based interventions, working with organizational-level change, partnership development and data management. Future capacity building efforts for the adoption of EBIs should focus on systems or provider level interventions and key processes for health promotion and should be delivered in a variety of ways to assist local organizations in cancer prevention and control.

77 FR 43616 - Office of the Assistant Secretary for Office of Disability Employment Program, National Technical...

Science.gov (United States)

2012-07-25

... Center will utilize social media and other electronic tools to influence its target audience of youth as..., foster care, transportation, mental health, vocational rehabilitation and others on effective practices..., National Technical Assistance and Demonstration Center on Preparing Youth With Disabilities for Employment...

Integrating research, legal technical assistance, and advocacy to inform shared use legislation in Mississippi.

Science.gov (United States)

Spengler, John O; Frost, Natasha R; Bryant, Katherine K

2014-01-01

The purpose of this article was to describe the process by which research findings informed the successful passage of legislation designed to increase opportunities for physical activity in Mississippi, and discuss implications and lessons learned from this process. The article is descriptive and conceptual, and addresses the collaborative process by which research, legal technical assistance, and advocacy informed and shaped shared use legislation in Mississippi. Collaborators informing this article were an Active Living Research grantee, a staff attorney with the Public Health Law Center, the American Heart Association Mississippi Government Relations Director, and community partners. The American Heart Association and Public Health Law Center developed policy guidance in the form of sample language for legislation as a starting point for states in determining policy needed to eliminate or reduce barriers to the shared use of school recreational facilities. The policy guidance was informed by evidence from Active Living Research-funded research studies. The American Heart Association, supporting a bill shaped by the policy guidance, led the effort to advocate for successful shared use legislation in Mississippi. Research should be policy relevant and properly translated and disseminated. Legal technical assistance should involve collaboration with both researchers and advocates so that policymakers have the information to make evidence-based decisions. Government relations directors should collaborate with legal technical staff to obtain and understand policy guidance relevant to their advocacy efforts. Effective collaborations, with an evidence-based approach, can lead to informed, successful policy change.

Results of Scientific and Technical Supervision of Hydraulic Fracturing Operations

Directory of Open Access Journals (Sweden)

I.Kh. Makhmutov

2017-11-01

Full Text Available The paper presents actual results of the research conducted as part of a field pilot project which consisted in interpretation of minifrac test data and evaluation of the efficiency of the scientific and technical supervision of fracking operations. The research program involved 11 wells targeting Devonian terrigenous reservoirs. Minifrac tests in one perforation interval were performed only in seven wells, that is approximately in 64% of total well count. A reliable fracture closure estimate was obtained only in six wells (55%, beginning of pseudoradial flow was observed only in one well out of 11 wells (9%. Hence, conventional minifrac tests should be supplemented with other diagnostic injection tests. Analysis of the performance of hydraulic fracturing operations conducted according to this pilot project plan indicates that fracture modelling, and scientific and technical supervision of fracking operations performed by Hydrofrac Research Laboratory of Institute TatNIPIneft Tatneft PJSC have yielded beneficial effects, namely 1.44 times increase in oil production rates.

Knowledge based operation assist system for JAERI AVF cyclotron

International Nuclear Information System (INIS)

Agematsu, T.; Okumura, S.; Yokota, W.; Arakawa, K.; Murakami, T.; Okamura, T.

1992-01-01

We have developed two operation assist systems for easy and rapid operation of the JAERI AVF cyclotron. One is a knowledge based expert system guiding the sequence of parameter adjustment to inexperienced cyclotron operators. The other is a real-time simulation of the beam trajectories which are calculated from actual operating parameters. It graphically indicates feasible setting range of parameters that satisfies the acceptance of the cyclotron. These systems provide a human interface to adjust the parameters of the cyclotron. (author)

Technical Status Report of the Regulatory Assistance Project: October 2001-February 2003

Energy Technology Data Exchange (ETDEWEB)

2003-08-01

This report details the work undertaken from October 2001 to February 2003 by the Regulatory Assistance Project under subcontract to the National Renewable Energy Laboratory. The objectives of this work were to develop regulatory policy options that would reduce the institutional and infrastructure barriers to full-value deployment of distributed power systems. Specific tasks included leading technical workshops on removing or overcoming regulatory barriers to distributed resources for state utility regulators and developing a draft model rule on emission performance standards for distributed generation.

Minilaparoscopy-assisted transumbilical laparoscopic cholecystectomy

Directory of Open Access Journals (Sweden)

GERALDO JOSÉ DE SOUZA LIMA

Full Text Available ABSTRACT The role of laparoscopy in the modern surgery era is well established. With the prospect of being able to improve the already privileged current situation, new alternatives have been proposed, such as natural orifice endoscopic surgery (NOTES, the method for single transumbilical access (LESS - Laparo-endoscopic single-site surgery and minilaparoscopy (MINI. The technique proposed by the authors uses a laparoscope with an operative channel like the flexible endoscope used in NOTES. All operative times are carried out through the umbilical trocar as in LESS, and assisted by a minilaparoscopy grasper. This new technic combines, and results from, the rationalization of technical particularities and synergy of these three approaches, seeking to join their advantages and minimize their disadvantages.

Manpower development for safe operation of nuclear power plant. China. Seminar on the technical support functions. Activity: 6.1.1-Task-03. Technical report

International Nuclear Information System (INIS)

Bouget, Y.H.

1994-01-01

The seminar discussed the objectives, organization and scope of work of the Central and Site Technical Service Department in support of operating NPP; transfer of capability to establish and maintain an efficient operation support; defined the responsibilities and interface between on site and Central Technical Staff

75 FR 68026 - Native American CDFI Assistance (NACA) Program

Science.gov (United States)

2010-11-04

... counseling (pre- and post- ), self-employment technical assistance, entrepreneurship training, and financial... of needs including, but not limited to, development of strategic planning documents (such as strategic or capitalization plans), market analyses or product feasibility analyses, operational policies...

UMTRA project technical assistance contractor quality assurance implementation plan for surface and ground water, Revision 2

International Nuclear Information System (INIS)

1995-11-01

This document contains the Technical Assistance Contractor (TAC) Quality Assurance Implementation Plan (QAIP) for the Uranium Mill Tailings Remedial Action (UMTRA) Project. The QAIP outlines the primary requirements for integrating quality functions for TAC technical activities applied to the surface and ground water phases of the UMTRA Project. The QA program is designed to use monitoring, audit, and surveillance activities as management tools to ensure that UMTRA Project activities are carried out in amanner to protect public health and safety, promote the success of the UMTRA Project, and meet or exceed contract requirements

The VOICES/VOCES success story: effective strategies for training, technical assistance and community-based organization implementation.

Science.gov (United States)

Hamdallah, Myriam; Vargo, Sue; Herrera, Jennifer

2006-08-01

The Centers for Disease Control and Prevention's Diffusion of Effective Behavioral Interventions (DEBI) project successfully disseminated VOICES/VOCES, a brief video-based HIV risk reduction intervention targeting African American and Latino heterosexual men and women at risk for HIV infection. Elements of the dissemination strategy included a comprehensive and user-friendly intervention kit, comprising (a) an implementationmanual and othermaterials necessary for conducting the intervention (b) a Training of Facilitators (TOF) curriculum used to teach agency staff how to implement the EBI in their setting, (c) a network of expert trainers who attend a training institute to become adept at using the TOF curriculum to train facilitators, (d) a comprehensive training coordination center to plan and deliver TOF trainings, (e) proactive technical assistance to trainers, and (f) post-TOF technical assistance for local implementers. This article reports on those strategies and a local CBO's successful participation in DEBI, resulting implementation of VOICES/VOCES, with unique approaches to adaptation and tailoring.

Expert systems to assist plant operation

International Nuclear Information System (INIS)

Matsumoto, Yoshihiro; Mori, Nobuyuki; Wada, Norio

1985-01-01

Large-scale real-time process control systems, such as those for electric power dispatching, large thermal and nuclear power stations, steel mill plants and manufacturing automation systems, need expert systems to assist operator's decision. The expert systems newly developed to fulfill the requirement are founded on OKBS (object oriented knowledge based system). OKBS provides various object types: fuzzy logic type, production rule type, frame type, state transition type, abstract data type and input/output transformation type. (author)

Training of technical staff for nuclear power station operation

International Nuclear Information System (INIS)

Haire, T.P.; Myerscough, P.B.

1981-01-01

The statutory training requirements covering the technical staff in the CEGB (Central Electricity Generating Board) are discussed. Details of the training programmes emphasize the importance of the staff having a thorough understanding of the nuclear processes involved in the station operation and not relying solely upon a mechanistic approach to operating procedures. The impact of this philosophy on the design of training simulators is examined and a brief comparison is made with the training philosophies in other countries. (U.K.)

Technical assistance for development of thermally conductive nitride filler for epoxy molding compounds

Energy Technology Data Exchange (ETDEWEB)

Ryu, Ho Jin; Song, Kee Chan; Jung, In Ha

2005-07-15

Technical assistance was carried out to develop nitride filler for thermally conductive epoxy molding compounds. Carbothermal reduction method was used to fabricate silicon nitride powder from mixtures of silica and graphite powders. Microstructure and crystal structure were observed by using scanning electron microscopy and x-ray diffraction technique. Thermal properties of epoxy molding compounds containing silicon nitride were measured by using laser flash method. Fabrication process of silicon nitride nanowire was developed and was applied to a patent.

Continued benefits of a technical assistance web site to local tobacco control coalitions during a state budget shortfall.

Science.gov (United States)

Buller, David B; Young, Walter F; Bettinghaus, Erwin P; Borland, Ron; Walther, Joseph B; Helme, Donald; Andersen, Peter A; Cutter, Gary R; Maloy, Julie A

2011-01-01

A state budget shortfall defunded 10 local tobacco coalitions during a randomized trial but defunded coalitions continued to have access to 2 technical assistance Web sites. To test the ability of Web-based technology to provide technical assistance to local tobacco control coalitions. Randomized 2-group trial with local tobacco control coalitions as the unit of randomization. Local communities (ie, counties) within the State of Colorado. Leaders and members in 34 local tobacco control coalitions funded by the state health department in Colorado. Two technical assistance Web sites: A Basic Web site with text-based information and a multimedia Enhanced Web site containing learning modules, resources, and communication features. Use of the Web sites in minutes, pages, and session and evaluations of coalition functioning on coalition development, conflict resolution, leadership satisfaction, decision-making satisfaction, shared mission, personal involvement, and organization involvement in survey of leaders and members. Coalitions that were defunded but had access to the multimedia Enhanced Web site during the Fully Funded period and after defunding continued to use it (treatment group × funding status × period, F(3,714) = 3.18, P = .0234). Coalitions with access to the Basic Web site had low Web site use throughout and use by defunded coalitions was nearly zero when funding ceased. Members in defunded Basic Web site coalitions reported that their coalitions functioned worse than defunded Enhanced Web site coalitions (coalition development: group × status, F(1,360) = 4.81, P = .029; conflict resolution: group × status, F(1,306) = 5.69, P = .018; leadership satisfaction: group × status, F(1,342) = 5.69, P = .023). The Enhanced Web site may have had a protective effect on defunded coalitions. Defunded coalitions may have increased their capacity by using the Enhanced Web site when fully funded or by continuing to use the available online resources after defunding

State-Targeted Funding and Technical Assistance to Increase Access to Medication Treatment for Opioid Use Disorder.

Science.gov (United States)

Abraham, Amanda J; Andrews, Christina M; Grogan, Colleen M; Pollack, Harold A; D'Aunno, Thomas; Humphreys, Keith; Friedmann, Peter D

2018-04-01

As the United States grapples with an opioid epidemic, expanding access to effective treatment for opioid use disorder is a major public health priority. Identifying effective policy tools that can be used to expand access to care is critically important. This article examines the relationship between state-targeted funding and technical assistance and adoption of three medications for treating opioid use disorder: oral naltrexone, injectable naltrexone, and buprenorphine. This study draws from the 2013-2014 wave of the National Drug Abuse Treatment System Survey, a nationally representative, longitudinal study of substance use disorder treatment programs. The sample includes data from 695 treatment programs (85.5% response rate) and representatives from single-state agencies in 49 states and Washington, D.C. (98% response rate). Logistic regression was used to examine the relationships of single-state agency targeted funding and technical assistance to availability of opioid use disorder medications among treatment programs. State-targeted funding was associated with increased program-level adoption of oral naltrexone (adjusted odds ratio [AOR]=3.14, 95% confidence interval [CI]=1.49-6.60, p=.004) and buprenorphine (AOR=2.47, 95% CI=1.31-4.67, p=.006). Buprenorphine adoption was also correlated with state technical assistance to support medication provision (AOR=1.18, 95% CI=1.00-1.39, p=.049). State-targeted funding for medications may be a viable policy lever for increasing access to opioid use disorder medications. Given the historically low rates of opioid use disorder medication adoption in treatment programs, single-state agency targeted funding is a potentially important tool to reduce mortality and morbidity associated with opioid disorders and misuse.

Regular pipeline maintenance of gas pipeline using technical operational diagnostics methods

Energy Technology Data Exchange (ETDEWEB)

Volentic, J [Gas Transportation Department, Slovensky plynarensky priemysel, Slovak Gas Industry, Bratislava (Slovakia)

1998-12-31

Slovensky plynarensky priemysel (SPP) has operated 17 487 km of gas pipelines in 1995. The length of the long-line pipelines reached 5 191 km, distribution network was 12 296 km. The international transit system of long-line gas pipelines ranged 1 939 km of pipelines of various dimensions. The described scale of transport and distribution system represents a multibillion investments stored in the ground, which are exposed to the environmental influences and to pipeline operational stresses. In spite of all technical and maintenance arrangements, which have to be performed upon operating gas pipelines, the gradual ageing takes place anyway, expressed in degradation process both in steel tube, as well as in the anti-corrosion coating. Within a certain time horizon, a consistent and regular application of methods and means of in-service technical diagnostics and rehabilitation of existing pipeline systems make it possible to save substantial investment funds, postponing the need in funds for a complex or partial reconstruction or a new construction of a specific gas section. The purpose of this presentation is to report on the implementation of the programme of in-service technical diagnostics of gas pipelines within the framework of regular maintenance of SPP s.p. Bratislava high pressure gas pipelines. (orig.) 6 refs.

Regular pipeline maintenance of gas pipeline using technical operational diagnostics methods

Energy Technology Data Exchange (ETDEWEB)

Volentic, J. [Gas Transportation Department, Slovensky plynarensky priemysel, Slovak Gas Industry, Bratislava (Slovakia)

1997-12-31

Slovensky plynarensky priemysel (SPP) has operated 17 487 km of gas pipelines in 1995. The length of the long-line pipelines reached 5 191 km, distribution network was 12 296 km. The international transit system of long-line gas pipelines ranged 1 939 km of pipelines of various dimensions. The described scale of transport and distribution system represents a multibillion investments stored in the ground, which are exposed to the environmental influences and to pipeline operational stresses. In spite of all technical and maintenance arrangements, which have to be performed upon operating gas pipelines, the gradual ageing takes place anyway, expressed in degradation process both in steel tube, as well as in the anti-corrosion coating. Within a certain time horizon, a consistent and regular application of methods and means of in-service technical diagnostics and rehabilitation of existing pipeline systems make it possible to save substantial investment funds, postponing the need in funds for a complex or partial reconstruction or a new construction of a specific gas section. The purpose of this presentation is to report on the implementation of the programme of in-service technical diagnostics of gas pipelines within the framework of regular maintenance of SPP s.p. Bratislava high pressure gas pipelines. (orig.) 6 refs.

Technical evolution and operation of French CO2 cooled reactors (UNGG)

International Nuclear Information System (INIS)

Berthion, Y.

1986-10-01

The technical evolution of the five French CO 2 cooled reactors (UNGG) from 1981 to 1986 needs to be outlined. These technical evolutions concerned the fuel element of Bugey 1 which is now slightly enriched, as well as the load reduction operation required by the grid. In addition work in underway to increase the safety at the two St Laurent units, or to repair the hot steel upper-structures of Chinon-3 unit

The assisting system for uranium enrichment plant operation

International Nuclear Information System (INIS)

Nakazawa, Hiroaki; Yamamoto, Fumio

1990-01-01

We have been developing an operation assisting system, partially supported by AI system, for uranium enrichment plant. The AI system is a proto-type system aiming a final one which can be applied to any future large uranium enrichment plant and also not only to specific operational area but also to complex and multi-phenomenon operational area. An existing AI system, for example facility diagnostic system that utilizes the result of CCT analysis as knowledge base, has weakness in flexibility and potentiality. To build AI system, we have developed the most suitable knowledge representations using deep knowledge for each facility or operation of uranium enrichment plant. This paper describes our AI proto-type system adopting several knowledge representations that can represent an uranium enrichment plant's operation with deep knowledge. (author)

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

Science.gov (United States)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

An object-oriented-database-system to assist control room staff

Energy Technology Data Exchange (ETDEWEB)

Schildt, G H [Vienna Univ. of Technology, Vienna (Austria). Inst. for Automation

1997-12-31

In order to assist control room staff of failure of any electrical or mechanical component a new objects-oriented-database-system (OODBS) has been developed and installed. Monitoring and diagnostics may be supported by this OODBS within a well-defined response time. The operator gets a report on different levels: For example, at a first level data about the vendor of a device (like reactor vessel internals, pumps, valves, etc.), data of installation, history of failures since installation, at a second level e.g. technical data of the device, at a next level e.g. a scanned photo of the device with its identification number within a certain compartment, and at another level using a CAD-system presenting technical drawings and corresponding part lists in order to assist necessary communication between operator and maintenance technician. (author). 3 refs, 10 figs.

An object-oriented-database-system to assist control room staff

International Nuclear Information System (INIS)

Schildt, G.H.

1996-01-01

In order to assist control room staff of failure of any electrical or mechanical component a new objects-oriented-database-system (OODBS) has been developed and installed. Monitoring and diagnostics may be supported by this OODBS within a well-defined response time. The operator gets a report on different levels: For example, at a first level data about the vendor of a device (like reactor vessel internals, pumps, valves, etc.), data of installation, history of failures since installation, at a second level e.g. technical data of the device, at a next level e.g. a scanned photo of the device with its identification number within a certain compartment, and at another level using a CAD-system presenting technical drawings and corresponding part lists in order to assist necessary communication between operator and maintenance technician. (author). 3 refs, 10 figs

IAEA Safeguards and technical support programs: POTAS in the 1990s

International Nuclear Information System (INIS)

Kessler, C.J.

1991-01-01

The US Program of Technical Assistance to IAEA Safeguards (POTAS) has since 1978 provided technology and technical assistance to the IAEA to support its nuclear safeguards activities. The present level of support, $6.9 million per year, equals 10% of the Department of Safeguards annual budget. During the next decade, the International Atomic Energy Agency (IAEA) will face new technical challenges in carrying out its verification activities. To help the IAEA acquire the technology and other technical support that it will require in the 1990s, POTAS expects to continue its assistance, both in the areas established in the past and in additional areas dictated by newly identified IAEA safeguards requirements. This paper will look at the political and policy context within which the Department of Safeguards, and hence POTAS, operates, and how that context is expected to evolve over the next decade. The roles and functions of POTAS will be identified and discussed in terms of their historical evolution. Lastly, the paper will consider how POTAS is expected to change during the 1990s, both to maintain effectiveness in existing roles and functions, and to meet the challenge of the changing policy context. 5 refs

Operating environment threats influence on the maritime ferry technical system safety – the numerical approach

Directory of Open Access Journals (Sweden)

Kuligowska Ewa

2017-06-01

Full Text Available The material given in this paper delivers the procedure for numerical approach that allows finding the main practically important safety characteristics of the complex technical systems at the variable operation conditions including operating environment threats. The obtained results are applied to the safety evaluation of the maritime ferry technical system. It is assumed that the conditional safety functions are different at various operation states and have the exponential forms. Using the procedure and the program written in Mathematica, the considered maritime ferry technical system main characteristics including: the conditional and the unconditional expected values and standard deviations of the system lifetimes, the unconditional safety function and the risk function are determined.

Turnaround operations analysis for OTV. Volume 2: Detailed technical report

Science.gov (United States)

1988-01-01

The objectives and accomplishments were to adapt and apply the newly created database of Shuttle/Centaur ground operations. Previously defined turnaround operations analyses were to be updated for ground-based OTVs (GBOTVs) and space-based OTVs (SBOTVs), design requirements identified for both OTV and Space Station accommodations hardware, turnaround operations costs estimated, and a technology development plan generated to develop the required capabilities. Technical and programmatic data were provided for NASA pertinent to OTV round and space operations requirements, turnaround operations, task descriptions, timelines and manpower requirements, OTV modular design and booster and Space Station interface requirements. SBOTV accommodations development schedule, cost and turnaround operations requirements, and a technology development plan for ground and space operations and space-based accommodations facilities and support equipment. Significant conclusion are discussed.

Sustainable hydropower in Lower Mekong Countries: Technical assessment and training travel report

Energy Technology Data Exchange (ETDEWEB)

Hadjerioua, Boualem [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-08-01

The U.S. Agency for International Development (USAID), through their partnership with the U.S. Department of the Interior (DOI), requested the support of Oak Ridge National Laboratory (ORNL) to provide specialized technical assistance as part of the Smart Infrastructure for the Mekong (SIM) Program in Thailand. Introduced in July 2013 by U.S. Secretary of State John Kerry, SIM is a U.S. Government Inter-Agency program that provides Lower Mekong partner countries with targeted, demand-driven technical and scientific assistance to support environmentally sound, climate conscious and socially equitable infrastructure, clean energy development, and water resources optimization. The U.S. Government is committed to supporting sustainable economic development within the region by providing tools, best practices, technical assistance, and lessons learned for the benefit of partner countries. In response to a request from the Electricity Generating Authority of Thailand (EGAT), a SIM project was developed with two main activities: 1) to promote hydropower sustainability and efficiency through technical assessment training at two existing hydropower assets in Thailand, and 2) the design and implementation of one national and two or three regional science and policy workshops, to be co-hosted with EGAT, to build common understanding of and commitment to environmental and social safeguards for Mekong Basin hydropower projects. The U.S. Department of Energy (DOE) is leading the technical assessment (Activity 1), and has contracted ORNL to provide expert technical assistance focused on increasing efficiency at existing projects, with the goal of increasing renewable energy generation at little to no capital cost. ORNL is the leading national laboratory in hydropower analysis, with a nationally recognized and highly qualified team of scientists addressing small to large-scale systems (basin-, regional-, and national-scale) energy generation optimization analysis for DOE. The

American Recovery and Reinvestment Act (ARRA) FEMP Technical Assistance for Geothermal Resource Evaluation Projects

Energy Technology Data Exchange (ETDEWEB)

Robert P. Breckenridge; Thomas R. Wood; Joel Renner

2010-09-01

The purpose of this document is to report on the evaluation of geothermal resource potential on and around three different United States (U. S.) Air Force Bases (AFBs): Nellis AFB and Air Force Range (AFR) in the State of Nevada (see maps 1 and 5), Holloman AFB in the State of New Mexico (see map 2), and Mountain Home AFB in the State of Idaho (see map 3). All three sites are located in semi-arid parts of the western U. S. The U. S. Air Force, through its Air Combat Command (ACC) located at Langley AFB in the State of Virginia, asked the Federal Energy Management Program (FEMP) for technical assistance to conduct technical and feasibility evaluations for the potential to identify viable geothermal resources on or around three different AFBs. Idaho National Laboratory (INL) is supporting FEMP in providing technical assistance to a number of different Federal Agencies. For this report, the three different AFBs are considered one project because they all deal with potential geothermal resource evaluations. The three AFBs will be evaluated primarily for their opportunity to develop a geothermal resource of high enough quality grade (i.e., temperature, productivity, depth, etc.) to consider the possibility for generation of electricity through a power plant. Secondarily, if the resource for the three AFBs is found to be not sufficient enough for electricity generation, then they will be described in enough detail to allow the base energy managers to evaluate if the resource is suitable for direct heating or cooling. Site visits and meetings by INL personnel with the staff at each AFB were held in late FY-2009 and FY-2010. This report provides a technical evaluation of the opportunities and challenges for developing geothermal resources on and around the AFBs. An extensive amount of literature and geographic information was evaluated as a part of this assessment. Resource potential maps were developed for each of the AFBs.

A visual assistance environment for cyclotron operation

International Nuclear Information System (INIS)

Okamura, Tetsuya; Murakami, Tohru; Agematsu, Takashi; Okumura, Susumu; Arakawa, Kazuo.

1993-01-01

A computer-based operation system for a cyclotron which assists inexperienced operators has been developed. Cyclotron start-up operations require dozens of adjustable parameters to be finely tuned to maximize extracted beam current. The human interfaces of the system provide a visual environment designed to enhance beam parameter adjustments. First, the mental model of operators is analyzed. It is supposed to be composed of five partial mental models: beam behavior model, feasible setting regions model, parameter sensitivity model, parameter mutual relation model, and status map model. Next, based on these models, three visual interfaces are developed, i.e., (1) Beam trajectory is rapidly calculated and graphically displayed whenever the operators change the cyclotron parameters. (2) Feasible setting regions (FSR) of the parameters that satisfy the cyclotron's beam acceptance criteria are indicated. (3) Search traces, being a historical visual map of beam current values, are superimposed on the FSRs. Finally, to evaluate system effectiveness, the search time required to reach maximum beam current conditions was measured. In addition, system operability was evaluated using written questionnaires. Results of the experiment showed that the search time to reach specific beam conditions was reduced by approximately 65% using these interfaces. The written questionnaires survey showed the operators highly evaluate system operability. (author)

Operational Plan Ontology Model for Interconnection and Interoperability

Science.gov (United States)

Long, F.; Sun, Y. K.; Shi, H. Q.

2017-03-01

Aiming at the assistant decision-making system’s bottleneck of processing the operational plan data and information, this paper starts from the analysis of the problem of traditional expression and the technical advantage of ontology, and then it defines the elements of the operational plan ontology model and determines the basis of construction. Later, it builds up a semi-knowledge-level operational plan ontology model. Finally, it probes into the operational plan expression based on the operational plan ontology model and the usage of the application software. Thus, this paper has the theoretical significance and application value in the improvement of interconnection and interoperability of the operational plan among assistant decision-making systems.

Technical information report: Plasma melter operation, reliability, and maintenance analysis

International Nuclear Information System (INIS)

Hendrickson, D.W.

1995-01-01

This document provides a technical report of operability, reliability, and maintenance of a plasma melter for low-level waste vitrification, in support of the Hanford Tank Waste Remediation System (TWRS) Low-Level Waste (LLW) Vitrification Program. A process description is provided that minimizes maintenance and downtime and includes material and energy balances, equipment sizes and arrangement, startup/operation/maintence/shutdown cycle descriptions, and basis for scale-up to a 200 metric ton/day production facility. Operational requirements are provided including utilities, feeds, labor, and maintenance. Equipment reliability estimates and maintenance requirements are provided which includes a list of failure modes, responses, and consequences

Assessment of comparative skills between hand-assisted and straight laparoscopic colorectal training on an augmented reality simulator.

Science.gov (United States)

Leblanc, F; Delaney, C P; Neary, P C; Rose, J; Augestad, K M; Senagore, A J; Ellis, C N; Champagne, B J

2010-09-01

The aim of this study was to compare skills sets during a hand-assisted and straight laparoscopic colectomy on an augmented reality simulator. Twenty-nine surgeons, assigned randomly in 2 groups, performed laparoscopic sigmoid colectomies on a simulator: group A (n = 15) performed hand-assisted then straight procedures; group B (n = 14) performed straight then hand-assisted procedures. Groups were compared according to prior laparoscopic colorectal experience, performance (time, instrument path length, and instrument velocity changes), technical skills, and operative error. Prior laparoscopic colorectal experience was similar in both groups. Both groups had better performances with the hand-assisted approach, although technical skill scores were similar between approaches. The error rate was higher with the hand-assisted approach in group A, but similar between both approaches in group B. These data define the metrics of performance for hand-assisted and straight laparoscopic colectomy on an augmented reality simulator. The improved scores with the hand-assisted approach suggest that with this simulator a hand-assisted model may be technically easier to perform, although it is associated with increased intraoperative errors.

A technical system to improve the operational monitoring of the Zaporozhye nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Beyer, M; Carl, H; Nowak, K [Technischer Ueberwachungsverein Rheinland, Koeln (Germany). Inst. for Nuclear Engineering and Radiation Protection; Schumann, P; Seidel, A; Weiss, F P; Zschau, J

1998-10-01

As part of the programme implemented by the German Ministry of Environment, Nature Conservation and Reactor Safety to cooperate with the Central and Eastern European States (CEES) and the Commonwealth of Independent States (CIS) in the area of nuclear safety, a technical system to improve operational monitoring has been designed, specified and established since 1992 as a pilot project in the Zaporozhye/Ukraine nuclear power plant by Forschungszentrum Rossendorf and Technischer Ueberwachungsverein Rheinland with a significant contribution from the State Scientific and Technical Centre of the Ukrainian supervisory authority. The technical system complements existing operational checking and monitoring facilities by including modern means of information technology. It enables a continuous monitoring of the state of unit 5 in normal operation and in cases of anomalies or incidents so that when recognisable deviations from the regular plant operation occur, the Ukrainian supervisory authority can immediately inquire and if necessary impose conditions on the operator. The radiological and meteorological parameters at the nuclear power plant location are monitored to the extent necessary to assess the current radiation situation and to implement efficient emergency management measures. (orig.)

A technical system to improve the operational monitoring of the Zaporozhye nuclear power plant

International Nuclear Information System (INIS)

Beyer, M.; Carl, H.; Nowak, K.; Schumann, P.; Seidel, A.; Weiss, F.P.; Zschau, J.

1998-01-01

As part of the programme implemented by the German Ministry of Environment, Nature Conservation and Reactor Safety to cooperate with the Central and Eastern European States (CEES) and the Commonwealth of Independent States (CIS) in the area of nuclear safety, a technical system to improve operational monitoring has been designed, specified and established since 1992 as a pilot project in the Zaporozhye/Ukraine nuclear power plant by Forschungszentrum Rossendorf and Technischer Ueberwachungsverein Rheinland with a significant contribution from the State Scientific and Technical Centre of the Ukrainian supervisory authority. The technical system complements existing operational checking and monitoring facilities by including modern means of information technology. It enables a continuous monitoring of the state of unit 5 in normal operation and in cases of anomalies or incidents so that when recognisable deviations from the regular plant operation occur, the Ukrainian supervisory authority can immediately inquire and if necessary impose conditions on the operator. The radiological and meteorological parameters at the nuclear power plant location are monitored to the extent necessary to assess the current radiation situation and to implement efficient emergency management measures. (orig.)

Unlocking investment in cities: ELENA-EIB technical assistance facility

International Nuclear Information System (INIS)

Cicmanova, Jana; Garabetian, Thomas

2015-06-01

Energy Cities prepared a review of projects undertaken in the cities of Paris, Malmoe (in association with Lund and Helsingborg), Barcelona, Bristol and Brussels-Capital that received support from the ELENA-EIB facility. The aim of this study is to identify the ways in which technical assistance programs such as ELENA-EIB can help unlock investment in cities. The projects we reviewed (developed by Energy Cities' members) cover a wide array of sectors, from public building refurbishment to public transport or renewable energy production. These five projects illustrate how cities can focus on developing capacity in a long-term perspective, looking at the expected benefits of an investment or a support mechanism beyond that of the project itself. Overall, we found that project development assistance mechanisms such as ELENA can be beneficial to trigger investment for climate action in cities. Cities maximise the benefits of such a program by looking at how their climate-protection actions can generate benefits for the citizens, or how to systematically integrate climate action in other investment projects. Project development assistance (PDA) affects cities by allowing them to develop a new vision of the way they prepare an investment program. The search of synergies and the override of silo mentalities were a core element in the projects we reviewed. Indeed, the support provided by the European Union through ELENA-EIB is used by the local authorities to develop a transversal approach to climate action. The grant provided for PDA and the requirements of the ELENA-EIB facility represent an opportunity for local authorities to set up a new strategy regarding energy efficiency and renewable energy actions. It can be the necessary push for cities and local authorities to change the way they plan their investments, and develop projects to achieve their climate objectives. Besides, the grant is used for building long-term capacity in the development of investment programs

Additive Manufacturing (AM) in Expeditionary Operations: Current Needs, Technical Challenges, and Opportunities

Science.gov (United States)

2016-06-01

REPORT TYPE AND DATES COVERED Master’s Thesis 06-30-2014 to 06-17-2016 4. TITLE AND SUBTITLE ADDITIVE MANUFACTURING (AM) IN EXPEDITIONARY OPERATIONS: CUR...CODE 13. ABSTRACT (maximum 200 words) Additive manufacturing (AM), or 3D printing, is poised to change the world of military expeditionary operations...unlimited ADDITIVE MANUFACTURING (AM) IN EXPEDITIONARY OPERATIONS: CURRENT NEEDS, TECHNICAL CHALLENGES, AND OPPORTUNITIES Matthew Daniel Friedell Captain

Assisted supervision of a computer aided tele-operation system

Energy Technology Data Exchange (ETDEWEB)

Le Bars, H; Gravez, P; Fournier, R

1994-12-31

This paper talks about Computer Aided Tele-operation (CAT) in dismantling and maintenance of nuclear plants. The current research orientations at CEA, basic concepts of the supervision assistance system and the realisation of a prototype are presented. (TEC). 3 refs., 4 figs.

Assisted supervision of a computer aided tele-operation system

International Nuclear Information System (INIS)

Le Bars, H.; Gravez, P.; Fournier, R.

1994-01-01

This paper talks about Computer Aided Tele-operation (CAT) in dismantling and maintenance of nuclear plants. The current research orientations at CEA, basic concepts of the supervision assistance system and the realisation of a prototype are presented. (TEC). 3 refs., 4 figs

14 CFR 399.91 - Air carrier participation in programs of technical assistance to airlines of less developed...

Science.gov (United States)

2010-01-01

... performance at reasonable cost and within a reasonable period of time consistent with the ability of the... interfere with the primary business of the subsidized carrier which is to provide air transportation in the... effectiveness in a technical assistance program would not only divert the attention of top management from...

The use of computer graphics to assist in-reactor operations

International Nuclear Information System (INIS)

Smith, A.L.

1995-01-01

A number of complex inspection and repair tasks have been carried out inside Nuclear Electric's gas cooled reactors using multi-link manipulators. The paper describes how computer graphics are integrated into the manipulator system and perform a key role during many phases of a project. Graphics simulation is used to assist with conceptual design, detailed path planning, rehearsals, quality assurance, demonstrations and, critically, as an on-line tool to assist the real-time operation of the equipment whilst performing complex in-reactor tasks. The techniques used are illustrated by recent examples of use to assist the inspection and repair of in-reactor components. (Author)

TECHNICAL RISK RATING OF DOE ENVIRONMENTAL PROJECTS - 9153

International Nuclear Information System (INIS)

Cercy, M.; Fayfich, Ronald; Schneider, Steven P.

2008-01-01

The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. The scope of work is diverse, with projects ranging from single acquisitions to collections of projects and operations that span several decades and costs from hundreds of millions to billions US$. The need to be able to manage and understand the technical risks from the project to senior management level has been recognized as an enabler to successfully completing the mission. In 2008, DOE-EM developed the Technical Risk Rating as a new method to assist in managing technical risk based on specific criteria. The Technical Risk Rating, and the criteria used to determine the rating, provides a mechanism to foster open, meaningful communication between the Federal Project Directors and DOE-EM management concerning project technical risks. Four indicators (technical maturity, risk urgency, handling difficulty and resolution path) are used to focus attention on the issues and key aspects related to the risks. Pressing risk issues are brought to the forefront, keeping DOE-EM management informed and engaged such that they fully understand risk impact. Use of the Technical Risk Rating and criteria during reviews provides the Federal Project Directors the opportunity to openly discuss the most significant risks and assists in the management of technical risks across the portfolio of DOE-EM projects. Technical Risk Ratings can be applied to all projects in government and private industry. This paper will present the methodology and criteria for Technical Risk Ratings, and provide specific examples from DOE-EM projects

International co-operation

International Nuclear Information System (INIS)

1997-01-01

In 1996, Nuclear Regulatory Authority of the Slovak Republic (NRA SR) ensured the Slovak Republic (SR) obligations with relation to the international agreements and with the SR membership in the IAEA.International co-operation has been ensured on the basis of the bilateral international agreements. With the Ministry of Foreign Affairs co-operation, the SR fulfilled its financial obligations to this organization in due time and in the full scope. Representing Central and Eastern Europe interest in the Board of Governors, the SR participation in the highest executive in the highest executive authority was finished in 1996.The Board of Governors Vice-chairman position was executed by NRA SR Chairman. 5 national and 6 regional technical co-operation and assistance projects were realized in 1996. 12 organizations participated in these projects and accordingly 104 experts took part in training programmes, scientific visits or as the mission members abroad. Besides, Slovak experts participated at work of technical advisory and consultation groups with the significant assistance. In the framework of IAEA co-operation, the SR was visited by 11 expert missions formed by 28 experts from 19 countries including IAEA. Slovak organizations, namely institutes of the Academy of Sciences, Slovak research centres and universities participated in IAEA scientific and research activities through NRA SR. 15 scientific contracts in total were approved and realized and these contracts are utilized as supplementary financing of the own scientific and research projects. Other international co-operation and regional co-operation activities of the NRA SR in 1996 are reviewed

Training for Success: Intelligence Training in Support of Humanitarian Assistance Operations

Science.gov (United States)

2016-06-10

11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION / AVAILABILITY STATEMENT Approved for Public Release; Distribution is Unlimited 13...makeshift tent hospitals or military helicopters and trucks delivering food, water and blankets as these are the images presented around the world by...Operation Unified Response in Haiti, Operation Tomodachi in 5 Japan, and Operation United Assistance in Liberia and Western Africa , were selected

Technical co-operation report for 1999. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-08-01

This report presents the IAEA Technical Co-operation (TC) activities in 1999 and covers three separate topics. Part I reports on the Strengthening of TC and looks at the elements of the TC Strategy and how they contributed to the TC Programme. Part II reports on the major achievements of the TC Programme in 1999 in different regions of the world. In addition to reviewing some of the results of national and regional activities in each region - including activities under Regional Co-operation Agreements - this section looks at three interregional projects, and provides highlights of selected projects that were closed in 1999. Part III presents a technical discussion of the financial parameters of the TC Programme. A more detailed review of resources and contributions, disbursements, and non-financial indicators is provided in a Supplement to this report.

Technical co-operation report for 1999. Report by the Director General

International Nuclear Information System (INIS)

2000-08-01

This report presents the IAEA Technical Co-operation (TC) activities in 1999 and covers three separate topics. Part I reports on the Strengthening of TC and looks at the elements of the TC Strategy and how they contributed to the TC Programme. Part II reports on the major achievements of the TC Programme in 1999 in different regions of the world. In addition to reviewing some of the results of national and regional activities in each region - including activities under Regional Co-operation Agreements - this section looks at three interregional projects, and provides highlights of selected projects that were closed in 1999. Part III presents a technical discussion of the financial parameters of the TC Programme. A more detailed review of resources and contributions, disbursements, and non-financial indicators is provided in a Supplement to this report

78 FR 65440 - Notice of Funds Availability (NOFA) Inviting Applications for the Native American CDFI Assistance...

Science.gov (United States)

2013-10-31

... post- ), self-employment technical assistance, entrepreneurship training, and financial management... organization's strategic direction, mission, or business operation and, thereby, its status as a Certified CDFI...

Commingled uranium-tailings study. Volume II. Technical report

Energy Technology Data Exchange (ETDEWEB)

None

1982-06-30

Public Law 96-540, Section 213, directs the Secretary of Energy to develop a plan for a cooperative program to provide assistance in the stabilization and management of defense-related uranium mill tailings commingled with other tailings. In developing the plan, the Secretary is further directed to: (1) establish the amount and condition of tailings generated under federal contracts; (2) examine appropriate methodologies for establishing the extent of federal assistance; and (3) consult with the owners and operators of each site. This technical report summarizes US Department of Energy (DOE) and contractor activities in pursuit of items (1), (2), and (3) above. Recommendations regarding policy and a cooperative plan for federal assistance are under separate cover as Volume I.

GANIL, Technical report on operating accelerators, 1995-1996

International Nuclear Information System (INIS)

Bex, M.

1998-01-01

This report covers the years 1995-1996 and presents the GANIL accelerator operation, the machine studies, the technical developments, the safety problems, the SISSI system and the THI project. The technical developments refer to: production of multicharged metallic ions by the association of an excimer laser and an ECR source; production of multicharged metallic ions with an ECR source by the sputtering method; detection of beam losses and safety system for these losses; rotating spiraled wire; renovation or RF systems; renovation of power supplies and NMR system; upgrade of GANIL control system cluster; adaptation of the GANIL control system to the SPIRAL project and control system for NMR probe measurements. Annexes giving the experiments performed in nuclear physics and in fast ion physics are given as well as a list of the beams accelerated together with their characteristics (charged state, frequency, final energy, intensity on target). Also added is a list of publications

Laparoscopic assistance by operating room nurses: Results of a virtual-reality study.

Science.gov (United States)

Paschold, M; Huber, T; Maedge, S; Zeissig, S R; Lang, H; Kneist, W

2017-04-01

Laparoscopic assistance is often entrusted to a less experienced resident, medical student, or operating room nurse. Data regarding laparoscopic training for operating room nurses are not available. The aim of the study was to analyse the initial performance level and learning curves of operating room nurses in basic laparoscopic surgery compared with medical students and surgical residents to determine their ability to assist with this type of procedure. The study was designed to compare the initial virtual reality performance level and learning curves of user groups to analyse competence in laparoscopic assistance. The study subjects were operating room nurses, medical students, and first year residents. Participants performed three validated tasks (camera navigation, peg transfer, fine dissection) on a virtual reality laparoscopic simulator three times in 3 consecutive days. Laparoscopic experts were enrolled as a control group. Participants filled out questionnaires before and after the course. Nurses and students were comparable in their initial performance (p>0.05). Residents performed better in camera navigation than students and nurses and reached the expert level for this task. Residents, students, and nurses had comparable bimanual skills throughout the study; while, experts performed significantly better in bimanual manoeuvres at all times (p<0.05). The included user groups had comparable skills for bimanual tasks. Residents with limited experience reached the expert level in camera navigation. With training, nurses, students, and first year residents are equally capable of assisting in basic laparoscopic procedures. Copyright © 2017 Elsevier Ltd. All rights reserved.

Technical co-operation report for 1998. Report by the Director General

International Nuclear Information System (INIS)

1999-01-01

This report presents the IAEA Technical Co-operation (TC) activities during 1998 and highlights most significant accomplishments. Part I of this report reviews the strengthening of TC, both in financial aspects and through implementation of the TC strategy. Part II reviews extensively the actual output of the TC programme; it looks at each geographic region, and reports on the results of national, regional and, where applicable, interregional activities in those regions. Part III presents a technical discussion of the financial parameters of the TC programme and ends with financial implementation summaries

Technical co-operation report for 1998. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

This report presents the IAEA Technical Co-operation (TC) activities during 1998 and highlights most significant accomplishments. Part I of this report reviews the strengthening of TC, both in financial aspects and through implementation of the TC strategy. Part II reviews extensively the actual output of the TC programme; it looks at each geographic region, and reports on the results of national, regional and, where applicable, interregional activities in those regions. Part III presents a technical discussion of the financial parameters of the TC programme and ends with financial implementation summaries.

7 CFR 610.4 - Technical assistance furnished.

Science.gov (United States)

2010-01-01

... consultants who provide services such as engineering, planning, environmental assessment, tax assessment, and... of program assistance, planning assistance, application of conservation practices, and assistance in...) County and other local government units such as park authorities, departments of public works, planning...

A conservation ontology and knowledge base to support delivery of technical assistance to agricultural producers in the united states

Science.gov (United States)

Information systems supporting the delivery of conservation technical assistance by the United States Department of Agriculture (USDA) to agricultural producers on working lands have become increasingly complex over the past 25 years. They are constrained by inconsistent coordination of domain knowl...

43 CFR 23.5 - Technical examination of prospective surface exploration and mining operations.

Science.gov (United States)

2010-10-01

... mining operations vary widely with respect to topography, climate, surrounding land uses, proximity to... surface exploration and mining operations. 23.5 Section 23.5 Public Lands: Interior Office of the Secretary of the Interior SURFACE EXPLORATION, MINING AND RECLAMATION OF LANDS § 23.5 Technical examination...

A technical system to improve the operational monitoring of the Zaporozh'ye nuclear power plant

International Nuclear Information System (INIS)

Beyer, M.; Carl, H.; Schumann, P.; Seidel, A.; Weiss, F.-P.; Zschau, J.; Nowak, K.

1997-01-01

As part of a programme of cooperation with Central and Eastern European states, a technical system has been established for the Zaporozhe nuclear power plant, which complements existing operational checking and monitoring facilities with modern means of information technology. It makes it possible to continuously monitor the state of the units in normal operation and in cases of anomalies or incidents. The parameters selected for monitoring are listed, and the system of automatic evaluation at the power plant site is described in detail. Test operation of the technical system started in late 1995 and the industrial testing phase in mid-1996. (A.K.)

Control rod guide tube wear in operating reactors; operating experience report. Technical report December 1977-December 1979

International Nuclear Information System (INIS)

Riggs, R.

1980-04-01

Evidence of control rod guide tube wear has been observed in operating pressurized water reactors. The cause of this wear is identified as flow-induced vibration of the control rods. This report describes the measures being taken by both the industry and the NRC to deal with this matter. The staff also presents its technical positions and requirements to support continued operation of the plants as of December 1979 pending completion of this generic effort

48{sup th} Annual meeting on nuclear technology (AMNT 2017). Key topic / Enhanced safety and operation excellence. Technical session: Operation and safety of nuclear installations, fuel

Energy Technology Data Exchange (ETDEWEB)

Hollands, Thorsten [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany). Bereich Reaktorsicherheitsforschung

2017-12-15

The sessions Fuel and Materials and Containment and SFP, as part of the Technical Sessions Operation and Safety of Nuclear Installations, Fuel implemented in the Key Topic Enhanced Safety and Operation Excellence were chaired by Dr. Thorsten Hollands (Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH) and Dr. Erwin Fischer (PreussenElektra GmbH) who was the keynote coordinator for the Technical Sessions. Both sessions consist of a keynote lecture followed by technical presentations.

General design of a technical assistance program to help DOE/prime contractor buyers in doing business with small disadvantaged businesses

Energy Technology Data Exchange (ETDEWEB)

Wood, M.T.; Radford, L.R.; Saari, L.M.; Wright, J.

1986-04-01

This report offers a design and recommendations for implementing a program of education to assist Department of Energy buyers and procurement officers in increasing the quality and quantity of small disadvantaged business (DB) participation in their contracted work. The recommendations are based on a previous companion report, ''Issues in Contracting with Small Minority Businesses,'' from which technical assistance and related needs were derived. The assistance program is based on buyer and disadvantaged-business needs, as determined from synthesizing the results of interviews with over two dozen minority business leaders and procurement officers.

Computer-assisted power plant management

International Nuclear Information System (INIS)

Boettcher, D.

1990-01-01

Operating a power plant and keeping it operational is ensured by a multiplicity of technical management subtasks which are cross referenced and based on an extensive inventory of descriptive and operational plant data. These data stocks are still registered in an isolated mode and managed and updated manually. This is a labor intensive, error prone procedure. In this situation, the introduction of a computer-assisted plant management system, whose core is a data-base of assured quality common to all activities, and which contains standardized processing aids fully planned for the subtasks occurring in the plant, is likely to achieve a considerable improvement in the quality of plant management and to relieve the staff of administrative activities. (orig.) [de

EVALUATING THE OVERALL TECHNICAL EFFICIENCY OF ISLAMIC BANKS OPERATING IN THE MENA REGION DURING THE FINANCIAL CRISIS.

Directory of Open Access Journals (Sweden)

Ali Said

2013-04-01

Full Text Available The present paper measured overall technical efficiency of Islamic banks operating in the MENA region during the financial crisis of 2007-2009 to address the question what are the levels of overall, pure technical and scale efficiency of Islamic banks operating in the MENA region and how they evolved during the financial crisis. This paper addresses this question technical, pure technical, and scale efficiency measures are analyzed by employing on-parametric technique, Data Envelopment Analysis (DEA. The study results suggested that Islamic banks in other MENA countries and North Africa on an average are relatively technically inefficient. This might be due to the underdeveloped banking system in those countries. In addition, the decomposition of technical efficiency into pure technical and scale efficiency shows that on average, the Islamic banks in North Africa counties and other MENA counties are having problems in the allocation of resources between their inputs and outputs mix compare to Islamic banks in GCC.

The Nuclear Emergency Assistance Team, a mobile intervention facility for nuclear accidents

International Nuclear Information System (INIS)

Koelzer, W.

1975-01-01

A nuclear emergency assistance team consisting of a vehicle pool and a stock of technical equipment was set up for operation in case of major reactor accidents. The equipment is kept in 6 containers which can be shipped on trucks, by rail or by helicopter or plane. Technical equipment and tasks of each container are briefly explained. Special transport vehicles for remote handling of contaminated material are described. (ORU) [de

Technical and operational organisation of the 'Swiss Marketplace': GridCode CH

International Nuclear Information System (INIS)

Imhof, K.; Baumann, R.

2001-01-01

This article describes the minimum requirements placed on the operators of electricity grids by the planned Swiss Electricity Market Law. These are compiled in the Swiss Grid Code - GridCode CH. The various players in an open electricity market such as generating companies, power brokers, those responsible for balance groups, grid operators, system co-ordinators, the operators of fine distribution networks and the final consumer and the roles they play are examined. The history of the development of the Grid Code, which contains technical and operational regulations for the successful co-operation of the market players, is reviewed. The contractual obligations of the partners involved and, in particular, regulations concerning metering, measured value designation and the provision of data are discussed

Technically-oriented operation management systems in conjunction with commercial DB systems

Energy Technology Data Exchange (ETDEWEB)

Lex, M.; Heselmann, B. [GiS mbH, Erlangen (Germany); Eschbach, P. [BASF Consult GmbH, Muenchen (Germany)

2001-07-01

Due to the liberalization of the electricity market, the efficiency and competitiveness of a power plant is increasingly measured at the cost per amount of energy generated. Thus, aspects of market-orientation and clearly cheaper electricity generation are in the foreground. Technically-oriented DP systems are necessary to save operating cost. These systems have structures differing from the mere business-oriented systems, because of the different frame conditions and operators' desire to stand out against rivalling competitors by technical and organizational measures. (orig.) [German] Die Effektivitaet und damit Konkurrenzfaehigkeit eines Kraftwerkes wird mit der Liberalisierung des Strommarktes verstaerkt an den Kosten je erzeugter Energieeinheit gemessen. Fuer den Betrieb ruecken damit Aspekte einer marktgerechten und somit deutlich kostenguenstigeren Stromerzeugung verstaerkt in den Vordergrund. Wer Betriebskosten sparen will, braucht technisch orientierte DV-Systeme, die aufgrund der unterschiedlichen Rahmenbedingungen und des Wunsches aller Anlagenbetreiber, sich durch technisch-organisatorische Massnahmen vom Wettbewerb vorteilhaft abzuheben, voellig andere Strukturen aufweisen als die betriebswirtschaftlich orientierten Systeme. (orig.)

Assuring PSA technical adequacy for new advanced light water reactor designs

International Nuclear Information System (INIS)

Lutz, R.J.; Detar, H.L.; Schneider, R.E.

2012-01-01

The Probabilistic Safety Assessment (PSA) for an Advanced Light Water Reactor (ALWR) must exhibit a high level of technical adequacy, or technical quality, in order to be used as a reliable tool for making risk informed decisions concerning design and eventual operation of the plant. During the design phase, decisions on some design features may use the PSA as an input. Also, the PSA may be used as input to other operational decisions during plant design and construction including the development of procedures, development of technical specification limiting conditions for operation and scheduling of preventive maintenance activities. For the existing fleet of light water reactors (LWRs), PSA technical adequacy can be judged from wide ranging acceptance criteria such as the PRA (Probabilistic Risk Assessment) Standard in the United States of America that was developed jointly by the American Society of Mechanical Engineers (ASME) and the American Nuclear Society (ANS). However, the requirements for PRA technical adequacy in this PRA Standard assumes that the plant is built and has operation experience. Some of the requirements cannot be met for ALWRs in the design or construction phase and with no operational history. Key elements of a high level of technical adequacy include procedures, operator interviews, plant walk-downs and equipment reliability histories. The ability to include these key elements into the ALWR PSA to improve technical adequacy will progress as the ALWR progresses from the design stage through the construction stage and finally to the fuel load / pre-operational stage. As the technical adequacy becomes more robust, more confidence can be placed on risk-informed decisions that are made with the PSA. To assist in using the PSA as input to design and operational decisions in the design and construction stages of an ALWR, an addition to the ASME/ANS PRA Standard is being developed. The intent of this addition to the Standard is to provide

Tore Supra: technical aspects and early results after one year of operation

International Nuclear Information System (INIS)

Gravier, R.

1989-01-01

After one year operation (1988 to 1989), technical aspects of component systems and equipment of Tore Supra are summarized. Particular attention is given to the operation with: supraconducting toroidal field coil system, cryogenic system, poloidal field system, in vessel equipment, first wall conditioning, pump limiter. The ergodic divertor experiments and the current drive experiment are reported. The plasma heating methods adopted in Tore Supra are presented

Robot-assisted pyeloplasty for pelvi-ureteric junction obstruction of lower moiety in partial duplex system: A technical challenge

Directory of Open Access Journals (Sweden)

Girdhar S Bora

2016-01-01

Full Text Available Management of pelvi-ureteric junction obstruction (PUJO in a duplex system is technically challenging as dissection at the pelvis may jeopardize the vascularity of the normal moiety ureter. Anastomosing the pelvis to the one single ureter will have a risk of future development of stricture which then will risk both the moieties. Robotic assistance enables appropriate tissue dissection; minimal handling of normal ureter and precision in suturing, overcoming the potential challenges involved in the minimally invasive management of such complex cases. We report the feasibility and efficacy of robot-assisted laparoscopic pyeloplasty in such case.

Cooperation of Russian and EU technical support organizations

International Nuclear Information System (INIS)

Kuznetsov, M.V.; Kozlov, Vl.V.; Kapralov, E.Yu.

2007-01-01

Since 1992, the fruitful collaboration of the Russian and Western-European technical support organizations (TSOs) is being continued due to the support of the European Commission. There are two main areas of activities. The first one is more of methodological assistance and enhancing RF TSOs capabilities to support Rostekhnadzor decision making process. Experience and knowledge acquired in this area projects increase RF TSOs capabilities regarding a wide spectrum of safety related issues assessment, in particular safety analyses, reactor vessel embrittlement, application of 'leak before break' concept, severe accident and accident management, fire risk evaluation, etc. The second area is focused on licensing related assessments of EC financed on site assistance projects (modernisations). This area projects promote implementation in Russia a licensing process based on a technical dialogue between operator and regulator as well contributes to transfer of Western practice in assessment of NPPs modernization. The improvement of managerial, scientific and technical capabilities of RF TSO experts may be considered as noteworthy and practical result of the TSOs cooperation. The continuation of such modality of RF and EU TSOs cooperation will be a good basis to cope with present and future challenges faced by TSOs in enhancing nuclear safety. (author)

75 FR 81832 - Technical Service Provider Assistance

Science.gov (United States)

2010-12-29

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service 7 CFR Part 652 Technical Service... as of Jan. 1, 2010, on page 565, in Sec. 652.2, the first definition for ``Technical service'' is removed. [FR Doc. 2010-32945 Filed 12-28-10; 8:45 am] BILLING CODE 1505-01-D ...

DESIGNING AND BUILDING EXERCISE MODEL OF TECHNICAL ENGLISH VOCABULARIES USING CALL (COMPUTER ASSISTED LANGUAGE LEARNING

Directory of Open Access Journals (Sweden)

Yogi Widiawati

2017-11-01

Full Text Available The research is aimed to assist and facilitate the students of Electrical and Electronics Department of Politeknik Negeri Jakarta (State Polytechnics of Jakarta, Indonesia, in learning technical English vocabulary. As technical students, they study ESP (English for Specific Purposes and they find some obstacles in memorizing technical vocabularies which are very important in order to read and understand manual books for laboratory and workshop. Some English technical vocabularies among others are “generate”, “pile”, “bench”, et cetera. The research outcome is software which will be beneficial for technical students, especially electrical and electronics students. This software can be used to practice their vocabulary skills, so they will be more skillful and knowledgeable. This software is designed by using the program of Rapid E-Learning Suite Version 5.2 and Flash CS3. The software practice contains some exercises on reading text and reading comprehension questions and presented with the multiple answers. This software is handy and flexible because students can bring it anywhere and be studied anytime. It is handy because this software is put and saved in CD (compact disc, so the students can take it with them anywhere and anytime they want to learn. In other words, they have flexibility to learn and practice English Technical Vocabularies. As a result, the students are found one of the ways to overcome their problems of memorizing vocabularies. The product is a kind of software which is easily used and portable so that the students can use the software anywhere and anytime. It consists of 3 (three sections of exercises. At the end of each exercise, the students are evaluated automatically by looking at the scoring system. These will encourage them to get good score by repeating it again and again. So the technical words are not problem for them. Furthermore, the students can practice technical English vocabulary both at home and

Technical data for concentrated solar power plants in operation, under construction and in project

Directory of Open Access Journals (Sweden)

Ugo Pelay

2017-08-01

Full Text Available This article presents technical data for concentrated solar power (CSP plants in operation, under construction and in project all over the world in the form of tables. These tables provide information about plants (e.g., name of the CSP plant, country of construction, owner of the plant, aim of the plant and their technical characteristics (e.g., CSP technology, solar power, area of the plant, presence and type of hybridization system, electricity cost, presence and type of TES, power cycle fluid, heat transfer fluid, operating temperature, operating pressure, type of turbine, type and duration of storage, etc.. Further interpretation of the data and discussions on the current state-of-the-art and future trends of CSP can be found in the associated research article (Pelay et al., 2017 [1].

Audit of Wolf Creek Generating Station, Unit 1 technical specifications. Final technical evaluation report

International Nuclear Information System (INIS)

Stromberg, H.M.

1985-07-01

This document was prepared for the Nuclear Regulatory Commission (NRC) to assist them in determining whether the Wolf Creek Generating Station Unit 1 Technical Specifications (T/S), which govern plant systems configurations and operations, are in conformance with the assumptions of the Final Safety Analysis Report (FSAR) as amended, the requirements of the Safety Evaluation Report (SER) as supplemented, and the Comments and Responses to the Wolf Creek Technical Specification Draft Inspection Report. A comparative audit of the FSAR as amended, the SER as supplemented, and the Draft Inspection Report was performed with the Wolf Creek T/S. Several discrepancies were identified and subsequently resolved through discussions with the cognizant NRC reviewer, NRC staff reviewers and/or utility representatives. The Wolf Creek Generating Station Unit 1 T/S, to the extent reviewed, are in conformance with the FSAR, SER, and Draft Inspection Report

Technical co-operation report for 1997. Report by the Director General

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-08-01

This report covers the IAEA Technical Co-operation (TC) activities during 1997, gives examples of the most significant accomplishments during the year and sets out the status of resources and delivery of the TC programme. The document outlines the steps taken to strengthen planning, design, monitoring and evaluation of TC projects. It also describes how the programme's operational base is being broadened to form new partnerships, using Country Programme Frameworks and Thematic Planning to meet the Member States' priority needs and expand project impact.

Technical co-operation report for 1997. Report by the Director General

International Nuclear Information System (INIS)

1998-08-01

This report covers the IAEA Technical Co-operation (TC) activities during 1997, gives examples of the most significant accomplishments during the year and sets out the status of resources and delivery of the TC programme. The document outlines the steps taken to strengthen planning, design, monitoring and evaluation of TC projects. It also describes how the programme's operational base is being broadened to form new partnerships, using Country Programme Frameworks and Thematic Planning to meet the Member States' priority needs and expand project impact

Operationality Improvement Control of Electric Power Assisted Wheelchair by Fuzzy Algorithm Considering Posture Angle

Science.gov (United States)

Murakami, Hiroki; Seki, Hirokazu; Minakata, Hideaki; Tadakuma, Susumu

This paper describes a novel operationality improvement control for electric power assisted wheelchairs. “Electric power assisted wheelchair” which assists the driving force by electric motors is expected to be widely used as a mobility support system for elderly people and disabled people, however, the performance of the straight and circular road driving must be further improved because the two wheels drive independently. This paper proposes a novel operationality improvement control by fuzzy algorithm to realize the stable driving on straight and circular roads. The suitable assisted torque of the right and left wheels is determined by fuzzy algorithm based on the posture angular velocity, the posture angle of the wheelchair, the human input torque proportion and the total human torque of the right and left wheels. Some experiments on the practical roads show the effectiveness of the proposed control system.

Substitution of Assisted Living Services by Assistive Technology - Experts Opinions and Technical Feasibility.

Science.gov (United States)

Schwartze, Jonas; Prekazi, Arianit; Schrom, Harald; Marschollek, Michael

2017-01-01

Ambient assisted living (AAL) may support ageing in place but is primarily driven by technology. The aim of this work is, to identifying reasons to move into assisted living institutions, their range of service and possible substitutability. We did semi-structured interviews with five experts from assisted living institutions and used results to design and implement assistive technologies in an AAL environment using BASIS, a cross domain bus system for smart buildings. Reasons for moving to assisted living institutions are expected benefits for chronic health problems, safety, social isolation and carefree living. We implemented six application systems for inactivity monitoring, stove shutdown, air quality monitoring, medication and appointment reminders, detection of unwanted situations before leaving and optical ringing of the doorbell. Substitution of selected assisted living services is feasible and has potential to delay necessity to move into assisted living institution if complement social services are installed.

TECHNICAL AND ECONOMIC EVALUATION OF THE HARVEST OF EUCALYPTUS WITH FELLER-BUNCHER IN DIFFERENT OPERATING CONDITIONS

Directory of Open Access Journals (Sweden)

Danilo Simões

2010-12-01

Full Text Available This study aimed to technically and economically evaluate the Feller-buncher in different conditions of harvest in eucalyptus forests of second cut. The technical analysis included a study of time and movements by the method of continuous time, and operational performance was determined by volume in cubic meters of harvested wood. The economic analysis included the parameters of operational cost, harvest cost and energy consumption. The analysis of the data showed that the composition of main line harvesting and the arrangement of bundles of trees influenced operational performance. The average operational cost was US$ 86.26 per hour of actual work, which resulted in an average cost of forest harvesting of US$ 1.09 m-³.

Independent technical review of the Pinellas Plant

Energy Technology Data Exchange (ETDEWEB)

1994-07-01

This report documents an Independent Technical Review (ITR) of facilities, organizations, plans, activities and various other elements required to successfully transition the Pinellas Plant from Defense Program (DP) funded operation to either community developed reuse or safe deactivation leading to decontamination and decommissioning (D&D). The review was conducted at the request of the Department of Energy (DOE) Deputy Assistant Secretary for Facility Transition and Management (EM-60) and is a consensus of the nine member ITR Team.

Feasibility and safety of augmented reality-assisted urological surgery using smartglass.

Science.gov (United States)

Borgmann, H; Rodríguez Socarrás, M; Salem, J; Tsaur, I; Gomez Rivas, J; Barret, E; Tortolero, L

2017-06-01

To assess the feasibility, safety and usefulness of augmented reality-assisted urological surgery using smartglass (SG). Seven urological surgeons (3 board urologists and 4 urology residents) performed augmented reality-assisted urological surgery using SG for 10 different types of operations and a total of 31 urological operations. Feasibility was assessed using technical metadata (number of photographs taken/number of videos recorded/video time recorded) and structured interviews with the urologists on their use of SG. Safety was evaluated by recording complications and grading according to the Clavien-Dindo classification. Usefulness of SG for urological surgery was queried in structured interviews and in a survey. The implementation of SG use during urological surgery was feasible with no intrinsic (technical defect) or extrinsic (inability to control the SG function) obstacles being observed. SG use was safe as no grade 3-5 complications occurred for the series of 31 urological surgeries of different complexities. Technical applications of SG included taking photographs/recording videos for teaching and documentation, hands-free teleconsultation, reviewing patients' medical records and images and searching the internet for health information. Overall usefulness of SG for urological surgery was rated as very high by 43 % and high by 29 % of surgeons. Augmented reality-assisted urological surgery using SG is both feasible and safe and also provides several useful functions for urological surgeons. Further developments and investigations are required in the near future to harvest the great potential of this exciting technology for urological surgery.

Advances in Robotic-Assisted Radical Prostatectomy over Time

Directory of Open Access Journals (Sweden)

Emma F. P. Jacobs

2013-01-01

Full Text Available Since the introduction of robot-assisted radical prostatectomy (RALP, robotics has become increasingly more commonplace in the armamentarium of the urologic surgeon. Robotic utilization has exploded across surgical disciplines well beyond the fields of urology and prostate surgery. The literature detailing technical steps, comparison of large surgical series, and even robotically focused randomized control trials are available for review. RALP, the first robot-assisted surgical procedure to achieve widespread use, has recently become the primary approach for the surgical management of localized prostate cancer. As a result, surgeons are constantly trying to refine and improve upon current technical aspects of the operation. Recent areas of published modifications include bladder neck anastomosis and reconstruction, bladder drainage, nerve sparing approaches and techniques, and perioperative and postoperative management including penile rehabilitation. In this review, we summarize recent advances in perioperative management and surgical technique for RALP.

Operation and evaluation of online risk communication assistant tool, 'ORCAT'

International Nuclear Information System (INIS)

Kimura, Hiroshi; Katsumura, Soichiro; Furuta, Kazuo; Matsumura, Kenichi; Tanaka, Hiroshi

2005-01-01

Risk communication about the high-level radioactive waste (HLW) disposal is necessary for public acceptance of HLW disposal program. Online Risk Communication Assistant Tool (ORCAT) system is developed in order to support risk communication for high-level radioactive disposal on World Wide Web. We have carried out two test operations of ORCAT system. First test operation is carried out from Jun. 26 to Feb. 13, 2003. After the first operation, we improved the ORCAT system, and carried out the second test operation from Dec. 4 to 22, 2004. In the second test operation, 20 participants replayed the questionnaire about usability of ORCAT system. In consequence, we found that the ORCAT system remains what need to refine, but is evaluated useful to the risk communication about the HLW disposal. (author)

Discovering Hidden Resources: Assistive Technology Recycling, Refurbishing, and Redistribution. RESNA Technical Assistance Project.

Science.gov (United States)

RESNA: Association for the Advancement of Rehabilitation Technology, Arlington, VA.

This monograph discusses the benefits of recycling and reusing assistive technology for students with disabilities. It begins by discussing the benefits of recycled assistive technology for suppliers, students, and consumers, and then profiles programmatic models for assistive technology recycling programs. The advantages and disadvantages for…

Risk-based technical specifications program: Site interview results

International Nuclear Information System (INIS)

Andre, G.R.; Baker, A.J.; Johnson, R.L.

1991-08-01

The Electric Power Research Institute and Pacific Gas and Electric Company are sponsoring a program directed at improving Technical Specifications using risk-based methods. The major objectives of the program are to develop risk-based approaches to improve Technical Specifications and to develop an Interactive Risk Advisor (IRA) prototype. The IRA is envisioned as an interactive system that is available to plant personnel to assist in controlling plant operation. Use of an IRA is viewed as a method to improve plant availability while maintaining or improving plant safety. In support of the program, interviews were conducted at several PWR and BWR plant sites, to elicit opinions and information concerning risk-based approaches to Technical Specifications and IRA requirements. This report presents the results of these interviews, including the functional requirements of an IRA. 2 refs., 6 figs., 2 tabs

Technical/institutional prerequisite for nuclear forensics response framework

International Nuclear Information System (INIS)

Tamai, Hiroshi; Okubo, Ayako; Kimura, Yoshiki; Kokaji, Lisa; Shinohara, Nobuo; Tomikawa, Hirofumi

2016-01-01

Nuclear Forensics capability has been developed under the international collaborations. For its effective function, technical development in analysis of seized nuclear materials as well as the institutional development in comprehensive response framework are required under individual national responsibility. In order to keep the “chain of custody” in the proper operation of sample collection at the event scene, radiological analysis at the laboratory, storage of the samples, and further inspection and trial, close cooperation and information sharing between relevant organisations are essential. IAEA issues the Implementing Guide to provide the model action plan and assists individual national development. Some countries at the advancing stage of national response framework, promote the international cooperation for the technical improvement and awareness cultivation. Examples in such national developments will be introduced and prospective technical/institutional prerequisite for nuclear forensics response framework will be studied. (author)

SCFA lead lab technical assistance at Oak Ridge Y-12 nationalsecurity complex: Evaluation of treatment and characterizationalternatives of mixed waste soil and debris at disposal area remedialaction DARA solids storage facility (SSF)

Energy Technology Data Exchange (ETDEWEB)

Hazen, Terry

2002-08-26

On July 17-18, 2002, a technical assistance team from the U.S. Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) met with the Bechtel Jacobs Company Disposal Area Remedial Action (DARA) environmental project leader to review treatment and characterization options for the baseline for the DARA Solids Storage Facility (SSF). The technical assistance request sought suggestions from SCFA's team of technical experts with experience and expertise in soil treatment and characterization to identify and evaluate (1) alternative treatment technologies for DARA soils and debris, and (2) options for analysis of organic constituents in soil with matrix interference. Based on the recommendations, the site may also require assistance in identifying and evaluating appropriate commercial vendors.

Virtual modeling of robot-assisted manipulations in abdominal surgery.

Science.gov (United States)

Berelavichus, Stanislav V; Karmazanovsky, Grigory G; Shirokov, Vadim S; Kubyshkin, Valeriy A; Kriger, Andrey G; Kondratyev, Evgeny V; Zakharova, Olga P

2012-06-27

To determine the effectiveness of using multidetector computed tomography (MDCT) data in preoperative planning of robot-assisted surgery. Fourteen patients indicated for surgery underwent MDCT using 64 and 256-slice MDCT. Before the examination, a specially constructed navigation net was placed on the patient's anterior abdominal wall. Processing of MDCT data was performed on a Brilliance Workspace 4 (Philips). Virtual vectors that imitate robotic and assistant ports were placed on the anterior abdominal wall of the 3D model of the patient, considering the individual anatomy of the patient and the technical capabilities of robotic arms. Sites for location of the ports were directed by projection on the roentgen-positive tags of the navigation net. There were no complications observed during surgery or in the post-operative period. We were able to reduce robotic arm interference during surgery. The surgical area was optimal for robotic and assistant manipulators without any need for reinstallation of the trocars. This method allows modeling of the main steps in robot-assisted intervention, optimizing operation of the manipulator and lowering the risk of injuries to internal organs.

Analysis of the prevailing standard and technical documents for their applicability under conditions of the 'Ukrytie' operation and technical proposals relating to the elaboration of new ones concerning fire safety

International Nuclear Information System (INIS)

Nazarenko, B.S.; Emets, V.G.

1998-01-01

An analysis of the prevailing laws and standards and technical documents (STD) to ensure safe operation of nuclear power installations, with requirements of nuclear, radiation and fire safety taken into account, has been performed. Proposals on application of some items of prevailing STD under conditions of the 'Ukrytie' operation are presented. Also given are technical proposals on correction of the prevailing operational standard documents and elaboration of special STD

13 CFR 108.2010 - Restrictions on use of Operational Assistance grant funds.

Science.gov (United States)

2010-01-01

... Assistance in connection with a Low-Income Investment made by the SSBIC with Regulatory Capital raised after... ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Requirements and Procedures for Operational...

[Intelligent operating room suite : From passive medical devices to the self-thinking cognitive surgical assistant].

Science.gov (United States)

Kenngott, H G; Wagner, M; Preukschas, A A; Müller-Stich, B P

2016-12-01

Modern operating room (OR) suites are mostly digitally connected but until now the primary focus was on the presentation, transfer and distribution of images. Device information and processes within the operating theaters are barely considered. Cognitive assistance systems have triggered a fundamental rethinking in the automotive industry as well as in logistics. In principle, tasks in the OR, some of which are highly repetitive, also have great potential to be supported by automated cognitive assistance via a self-thinking system. This includes the coordination of the entire workflow in the perioperative process in both the operating theater and the whole hospital. With corresponding data from hospital information systems, medical devices and appropriate models of the surgical process, intelligent systems could optimize the workflow in the operating theater in the near future and support the surgeon. Preliminary results on the use of device information and automatically controlled OR suites are already available. Such systems include, for example the guidance of laparoscopic camera systems. Nevertheless, cognitive assistance systems that make use of knowledge about patients, processes and other pieces of information to improve surgical treatment are not yet available in the clinical routine but are urgently needed in order to automatically assist the surgeon in situation-related activities and thus substantially improve patient care.

How operator admittance affects the response of a teleoperation system to assistive forces – A model analytic study and simulation

International Nuclear Information System (INIS)

Wildenbeest, J.G.W.; Abbink, D.A.; Boessenkool, H.; Heemskerk, C.J.M.; Koning, J.F.

2013-01-01

Highlights: ► We developed a computational model of a human operator controlling a teleoperation system based on feedforward control, while performing a free-space motion. ► We studied how assistive forces affect the response of the combined system of telemanipulator and operator, when operator admittance changes due to task instruction or arm configuration. ► Inappropriate assistive forces can lead to assistive forces that are either not perceived, or deflect the combined system; assistive forces should be tailored to operator admittance. ► It is required to study, measure and quantitatively model operator behavior for teleoperated tasks in more detail. -- Abstract: Haptic shared control is a promising approach to increase the effectiveness of remote handling operations. While in haptic shared control the operator is continuously guided with assistive forces, the operator's response to forces is not fully understood. This study describes the development of a computational model of a human operator controlling a teleoperation system based on feedforward control. In a simulation, the operator's response to repulsive forces in free-space motions was modeled for two degrees of freedom, for two operator endpoint admittances (estimated by means of closed-loop identification techniques). The simulation results show that similar repulsive forces lead to substantial discrepancies in response when admittance settings mismatch; wrongly estimated operator admittances can lead to assistive forces that are either not perceived, or deflect the combined system of human operator and telemanipulator. It is concluded that assistive forces should be tailored to the arm configuration and the type of task performed. In order to utilize haptic shared control to its full potential, it is required to study, measure and quantitatively model operator behavior for teleoperated tasks in more detail

How operator admittance affects the response of a teleoperation system to assistive forces – A model analytic study and simulation

Energy Technology Data Exchange (ETDEWEB)

Wildenbeest, J.G.W., E-mail: j.g.w.wildenbeest@tudelft.nl [Department of Biomechanical Engineering, Delft University of Technology, Mekelweg 2, 2626 CD Delft (Netherlands); Heemskerk Innovative Technology B.V., Jonckerweg 12, 2201 DZ Noordwijk (Netherlands); Abbink, D.A. [Department of Biomechanical Engineering, Delft University of Technology, Mekelweg 2, 2626 CD Delft (Netherlands); Boessenkool, H. [FOM Institute DIFFER (Dutch Institute of Fundamental Energy Research), Association EUROTOM-FOM, Partner in the Trilateral Eurogio Cluster, P.O. Box 1207, 3430 BE Nieuwegein (Netherlands); Heemskerk, C.J.M.; Koning, J.F. [Heemskerk Innovative Technology B.V., Jonckerweg 12, 2201 DZ Noordwijk (Netherlands); FOM Institute DIFFER (Dutch Institute of Fundamental Energy Research), Association EUROTOM-FOM, Partner in the Trilateral Eurogio Cluster, P.O. Box 1207, 3430 BE Nieuwegein (Netherlands)

2013-10-15

Highlights: ► We developed a computational model of a human operator controlling a teleoperation system based on feedforward control, while performing a free-space motion. ► We studied how assistive forces affect the response of the combined system of telemanipulator and operator, when operator admittance changes due to task instruction or arm configuration. ► Inappropriate assistive forces can lead to assistive forces that are either not perceived, or deflect the combined system; assistive forces should be tailored to operator admittance. ► It is required to study, measure and quantitatively model operator behavior for teleoperated tasks in more detail. -- Abstract: Haptic shared control is a promising approach to increase the effectiveness of remote handling operations. While in haptic shared control the operator is continuously guided with assistive forces, the operator's response to forces is not fully understood. This study describes the development of a computational model of a human operator controlling a teleoperation system based on feedforward control. In a simulation, the operator's response to repulsive forces in free-space motions was modeled for two degrees of freedom, for two operator endpoint admittances (estimated by means of closed-loop identification techniques). The simulation results show that similar repulsive forces lead to substantial discrepancies in response when admittance settings mismatch; wrongly estimated operator admittances can lead to assistive forces that are either not perceived, or deflect the combined system of human operator and telemanipulator. It is concluded that assistive forces should be tailored to the arm configuration and the type of task performed. In order to utilize haptic shared control to its full potential, it is required to study, measure and quantitatively model operator behavior for teleoperated tasks in more detail.

Technical reference book for the Energy Economic Data Base Program: EEDB Phase 9 (1987)

International Nuclear Information System (INIS)

1988-07-01

This document provides the current technical design bases for each technical data model (of and electric generating plant) in the eighth update. It contains a set of detailed system design descriptions (supplemented with engineering drawings) for the technical data models. This distribution is the latest in a series published since 1978. The overall program purpose is to provide periodically updated, detailed base construction cost estimates for large nuclear electric operating plants. These data, which are representative of current US powerplant construction cost experience, are a useful contribution to program planning by the Office of the Assistant Secretary for Nuclear Energy

SCFA lead lab technical assistance at Lawrence Berkeley National Laboratory: Baseline review of three groundwater plumes

Energy Technology Data Exchange (ETDEWEB)

Hazen, Terry; et al.

2002-09-26

During the closeout session, members of the technical assistance team conveyed to the site how impressed they were at the thoroughness of the site's investigation and attempts at remediation. Team members were uniformly pleased at the skilled detection work to identify sources, make quick remediation decisions, and change course when a strategy did not work well. The technical assistance team also noted that, to their knowledge, this is the only DOE site at which a world-class scientist has had primary responsibility for the environmental restoration activities. This has undoubtedly contributed to the successes observed and DOE should take careful note. The following overall recommendations were agreed upon: (1) The site has done a phenomenal job of characterization and identifying and removing source terms. (2) Technologies selected to date are appropriate and high impact, e.g. collection trenches are an effective remedial strategy for this complicated geology. The site should continue using technology that is adapted to the site's unique geology, such as the collection trenches. (3) The site should develop a better way to determine the basis of cleanup for all sites. (4) The sentinel well system should be evaluated and modified, if needed, to assure that the sentinel wells provide coverage to the current site boundary. Potential modifications could include installation, abandonment or relocation of wells based on the large amount of data collected since the original sentinel well system was designed. (5) Modeling to assist in remedial design and communication should continue. (6) The site should develop a plan to ensure institutional memory. (7) The most likely possibility for improving closure to 2006 is by removing the residual source of the Old Town plume and establishing the efficacy of remediation for the 51/64 plume.

Transcanalicular laser-assisted dacryocystorhinostomy.

Science.gov (United States)

Rosen, N; Barak, A; Rosner, M

1997-09-01

Current techniques of laser-assisted dacryocystorhinostomy are mostly endonasal. In this report, the authors describe their technique of laser-assisted dacryocystorhinostomy performed through the canaliculi and the surgical results they achieved. Fourteen patients with nasolacrimal duct obstruction underwent transcanalicular laser-assisted dacryocystorhinostomy. The bony ostium was perforated using a fiber optic-transmitting, giant-pulse Nd:YAG laser, with an energy of 0.5 to 4 J per pulse. The total energy used to create an ostium was 18 to 34 J. A silicone tube was inserted through the canaliculi and the ostium into the nasal cavity and kept in place for 5 to 7 months. Patients were observed for 18 to 22 months. Nine of the 14 patients (64%) reported the disappearance of epiphora following surgery. In 3 patients, no relief of epiphora was obtained. In 1 patient the operation was not completed because of severe nasal bleeding. In another, tearing began 12 months after surgery (6 months after tube removal). Transcanalicular laser-assisted dacryocystorhinostomy is a potentially useful method for performing dacryocystorhinostomy. Technical modifications and improvements are needed to increase the success rate.

Risk-based configuration control: Application of PSA in improving technical specifications and operational safety

International Nuclear Information System (INIS)

Samanta, P.K.; Kim, I.S.; Vesely, W.E.

1992-01-01

Risk-based configuration control is the management of component configurations using a risk perspective to control risk and assure safety. A configuration, as used here, is a set of component operability statuses that define the state of a nuclear power plant. If the component configurations that have high risk implications do not occur, then the risk from the operation of nuclear power plants would be minimal. The control of component configurations, i.e., the management of component statuses, to minimize the risk from components being unavailable, becomes difficult, because the status of a standby safety system component is often not apparent unless it is tested. Controlling plant configuration from a risk-perspective can provide more direct risk control and also more operational flexibility by allowing looser controls in areas unimportant to risk. Risk-based configuration control approaches can be used to replace parts of nuclear power plant Technical Specifications. With the advances in probabilistic safety assessment (PSA) technology, such approaches to improve Technical Specifications and operational safety are feasible. In this paper, we present an analysis of configuration risks, and a framework for risk-based configuration control to achieve the desired control of risk-significant configurations during plant operation

Use of experience for the improvement of technical specifications for operation

International Nuclear Information System (INIS)

Schweitz, J.P.; Seveon, J.J.

1987-11-01

The lessons drawn from experience led EdF to define in 1980 a national specification standard, to be applied to the first standardized series of 900 MWe units and to be adapted to the later 1300 MWe units. This document is periodically revised, every two years or so, to take into account new trends in safety thinking and lessons learnt from operating experience. In this paper we present the main developments in the field of technical specifications, particularly: the definition of rules applicable in the event of unavailability of safety-related equipment, the integration of plant unit operating feedback for specifications optimization

Technical specifications manual for the MARK-1 pulsed ionizing radiation detection system

International Nuclear Information System (INIS)

Lawrence, R.S.; Harker, Y.D.; Jones, J.L.; Hoggan, J.M.

1993-03-01

The MARK-1 detection system was developed by the Idaho National Engineering Laboratory for the US Department of Energy Office of Arms Control and Nonproliferation. The completely portable system was designed for the detection and analysis of intense photon emissions from pulsed ionizing radiation sources. This manual presents the technical design specifications for the MARK-1 detection system and was written primarily to assist the support or service technician in the service, calibration, and repair of the system. The manual presents the general detection system theory, the MARK-1 component design specifications, the acquisition and control software, the data processing sequence, and the system calibration procedure. A second manual entitled: Volume 2: Operations Manual for the MARK-1 Pulsed Ionizing Radiation Detection System (USDOE Report WINCO-1108, September 1992) provides a general operational description of the MARK-1 detection system. The Operations Manual was written primarily to assist the field operator in system operations and analysis of the data

Technical Review of Operator's Destructive Analyses at the Rokkasho Reprocessing Plant: Strengthening the Transparency of the Operator's Measurement System

International Nuclear Information System (INIS)

Sato, N.; Katchi, T.; Niitsu, Y.; Duhamel, G.; Decaillon, J.-G.; Toervenyi, A.; Sayama, H.; Hara, S.

2015-01-01

The Rokkasho Reprocessing Plant is a large-scale nuclear facility in Japan. For the purposes of process control, product management and nuclear material accountancy for safeguards purposes, the laboratory of the facility operator analyzes thousands of samples from various process streams and with a multitude of matrices. Transparency of operational procedures, quality control measures and sample analytical results among the facility operator and state and international safeguards authorities are required to assess the facility operator's measurement system, and thus to assure a credible safeguards approach. The facility operator, Japan Nuclear Fuel, Limited (JNFL), is engaged in continuous improvement of its nuclear material analyzes. For the declarations to the inspectorates, it is important that JNFL and the safeguards authorities be able to confirm that the analytical methods used by JNFL are reliable and meet the latest version of the International Target Values. Since 2012 JNFL, the IAEA and the SSAC have carried out several technical reviews of the destructive analysis (DA) processes as a means of strengthening the transparency of the DA measurement systems. The goal of the DA technical reviews is to (1) assess past commitments of the JNFL plan for analytical improvement, (2) review the JNFL Quality System by means of documentation reviews and in-field demonstrations, and (3) review the analytical performance of the JNFL lab through its own results or from inter-laboratory comparison exercises. Throughout this process, subject-matter experts from all organizations met with JNFL laboratory staff and discussed analytical concerns and solutions. The outcome of these technical reviews was a series of recommendations to JNFL for strengthening its plan for continuous improvement. This paper presents the methodology of the DA technical reviews, the communication scheme and some examples of the outcome for JNFL to improve its DA methods and analytical

Gulf Coast Section SPE Production Operations Study Group-technical highlights from a series of frac pack treatment symposiums

Energy Technology Data Exchange (ETDEWEB)

McLarty, J.M.; DeBonis, V.

1995-12-31

One of the main functions of the SPE is to provide a means for collection, dissemination, and exchange of technical information and to provide technical forums that afford opportunities for members to maintain and upgrade their technical competence. The large chapters (such as Houston SPE) located near many oil company headquarters have the advantage of being able to bring together a cross section of service company and operator personnel representing operations and research from major and independent operators. This paper describes a series of 1-day symposiums on frac pack technology that were organized by the Houston-based Gulf Coast Section SPE Production Operations Study Group. These study sessions provided a means for the local members of the industry to further develop a new technology as a team. Publishing the major focus and contributions of the seminars will allow sharing of the technology with chapters outside of Houston.

Technical Challenges and Opportunities of Centralizing Space Science Mission Operations (SSMO) at NASA Goddard Space Flight Center

Science.gov (United States)

Ido, Haisam; Burns, Rich

2015-01-01

The NASA Goddard Space Science Mission Operations project (SSMO) is performing a technical cost-benefit analysis for centralizing and consolidating operations of a diverse set of missions into a unified and integrated technical infrastructure. The presentation will focus on the notion of normalizing spacecraft operations processes, workflows, and tools. It will also show the processes of creating a standardized open architecture, creating common security models and implementations, interfaces, services, automations, notifications, alerts, logging, publish, subscribe and middleware capabilities. The presentation will also discuss how to leverage traditional capabilities, along with virtualization, cloud computing services, control groups and containers, and possibly Big Data concepts.

Technical requirements on knowledge base and instrumentation system for decision making in plant operation and maintenance

International Nuclear Information System (INIS)

Kitamura, Masaharu; Yoshikawa, Shinji; Hasegawa, Makoto

1998-03-01

A series of technical surveys and studies are described in this report to examine and identify technical requirements to be posed on knowledge base and instrumentation system as the fundamental in high reliability computational decision making in operation and maintenance of nuclear power plants. Monitoring and diagnosis are focused as the important tasks among the operation/maintenance-related tasks. A concrete monitoring and diagnosis system configuration has been proposed consisting of distributed symptom database and of on-demand measurement subsystem. An prototype of the proposed system configuration has been successfully verified. (author)

Report on operation, utilization and technical development of research reactors and hot laboratory

International Nuclear Information System (INIS)

1980-03-01

Activities of the Division of Research Reactor Operation in fiscal 1978 are described. The division is responsible for operation and maintenance of JRR-2, JRR-3, JRR-4 and Hot Laboratory. In the above connection, various other works are performed, including technical management of fuel and coolant, radiation control, irradiation technique, etc. In Hot Laboratory, postirradiation examinations of fuels and materials are made, and also development of examination methods. (author)

Report on operation utilization and technical development of research reactors and hot laboratory

International Nuclear Information System (INIS)

1982-03-01

Activities of the Division of Research Reactor Operation in fiscal 1980 are described. The division is responsible for operation and maintenance of JRR-2, JRR-3, JRR-4 and Hot Laboratory. In the above connection, various other works are performed, including technical management of fuel and coolant, radiation control, irradiation technique, etc. In Hot Laboratory, postirradiation examinations of fuels and materials are made, and also development of examination methods. (author)

Report on operation, utilization and technical development of Research Reactors and Hot Laboratory

International Nuclear Information System (INIS)

1984-10-01

Activities of the Division of Research Reactor Operation in fiscal 1981 are described. The division is responsible for operation and maintenance of JRR-2, JRR-3, JRR-4 and Hot Laboratory. In the above connection, various other works are performed, including technical management of fuel and coolant, radiation control, irradiation technique, etc. In Hot Laboratory, postirradiation examinations of fuels and materials are made, and also development of examination methods. (author)

The IAEA technical Co-operation a partner in development in Latin America

International Nuclear Information System (INIS)

El-Saiedi, A.

1995-01-01

Each country was to find means of achieving sustainable development, and for this, technology within a framework of regional and international co-operation are of utmost importance. The IAEA plays a major role in promoting nuclear technologies for development. Highlights of the IAEA's technical cooperation programme are given in this paper

7. IAEA Technical Meeting on Steady State Operation of Magnetic Fusion Devices - Booklet of abstracts

International Nuclear Information System (INIS)

2015-01-01

This meeting has provided an appropriate forum to discuss current issues covering a wide range of technical topics related to the steady state operation issues and also to encourage forecast of the ITER performances. The technical meeting includes invited and contributed papers. The topics that have been dealt with are: 1) Superconducting devices (ITER, KSTAR, Tore-Supra, HT-7U, EAST, LHD, Wendelstein-7-X,...); 2) Long-pulse operation and advanced tokamak physics; 3) steady state fusion technologies; 4) Long pulse heating and current drive; 5) Particle control and power exhaust, and 6) ITER-related research and development issues. This document gathers the abstracts

Technical and operational assessment of molecular nanotechnology for space operations

Science.gov (United States)

McKendree, Thomas Lawrence

2001-07-01

This study assesses the performance of conventional technology and three levels of molecular nanotechnology (MNT) for space operations. The measures of effectiveness are technical performance parameters for five space transportation architectures, and the total logistics cost for an evaluation scenario with mining, market and factory locations on the Moon, Mars and asteroids. On these measures of effectiveness, improvements of 2--4 orders of magnitude are seen in chemical rockets, solar electric ion engines, solar sail accelerations (but not transit times), and in structural masses for planetary skyhooks and towers. Improvements in tether performance and logistics costs are nearer to 1 order of magnitude. Appendices suggest additional improvements may be possible in space mining, closed-environment life support, flexible operations, and with other space transportation architectures. In order to assess logistics cost, this research extends the facility location problem of location theory to orbital space. This extension supports optimal siting of a single facility serving circular, coplanar orbits, locations in elliptic planetary and moon orbits, and heuristic siting of multiple facilities. It focuses on conventional rocket transportation, and on high performance rockets supplying at least 1 m/s2 acceleration and 500,000 m/s exhaust velocity. Mathematica implementations are provided in appendices. Simple MNT allows diamond and buckytube construction. The main benefits are in chemical rocket performance, solar panel specific power, solar electric ion engine performance, and skyhook and tower structural masses. Complex MNT allows very small machinery, permitting large increases in solar panel specific power, which enables solar electric ion engines that are high performance rockets, and thus reduces total logistics costs an order of magnitude. Most Advance MNT allows molecular manufacturing, which enables self-repair, provides at least marginal improvements in nearly

NREL technical assistance to Argentina

Energy Technology Data Exchange (ETDEWEB)

Lilienthal, P. [National Renewable Energy Lab., Golden, CO (United States)

1997-12-01

This paper describes assistance to Argentina from the National Renewable Energy Laboratory which has touched on four programs: tariff analysis for rural concessions programs; wind/diesel hybrid retrofits in Patagonia; small hybrid systems designs for rural schools; an assessment of wind resources. The paper expands briefly on the first two points.

Expert systems for plant operations training and assistance

International Nuclear Information System (INIS)

Pack, R.W.; Lazar, P.M.; Schmidt, R.V.; Gaddy, C.D.

1988-01-01

The project described in this paper explored the use of expert systems for plant operations training and assistance. Three computer technologies were reviewed: computer-aided instruction, expert systems, and expert training systems (ETS). The technology of CAI has been developed since the early 1960s, and a wide range of applications are available commercially today. Expert systems have been developed primarily as job performance aids, and the number of commercial applications is increasing. A fully developed ETS has models of the trainer and trainee, in addition to a knowledge base

Computerized aids and human factors in nuclear power plant operation

International Nuclear Information System (INIS)

Bastl, W.

1988-01-01

When guiding a complex process and associated intermeshed systems in a nuclear power plant, a primary issue consists of the call for excellent information. Technically speaking, today's centralized control rooms are at the end of a development phase which has been governed by the introduction of remote information and remote control systems. But by centralization, an information overload problem arose, and it has been solved by dividing panels according to systems, operational phases and specific tasks. In addition, the overview and relationship of systems have been visualized by mimic diagrams. It is attempted to make transparent the technical back-ground of the processes and systems to be controlled, thus to provide the necessary basis for understanding the problems of operators. Practical examples are used for the purpose. The information dilemma, the systems for high level information, automation and information, plant safety and information, and the problem of where to go from here are described. Computerized operator aids must be discussed along assistance in information and assistance in automatic control. (Kako, I.)

The IAEA technical Co-operation a partner in development in Latin America

Energy Technology Data Exchange (ETDEWEB)

El-Saiedi, A [International Atomic Energy Agency, Vienna (Austria). Div. of Public Information

1995-10-01

Each country was to find means of achieving sustainable development, and for this, technology within a framework of regional and international co-operation are of utmost importance. The IAEA plays a major role in promoting nuclear technologies for development. Highlights of the IAEA`s technical cooperation programme are given in this paper.

On the issue of selecting technical and operational parameters for buses in urban passenger routes

Directory of Open Access Journals (Sweden)

Rudzinskyi V.V.

2017-10-01

Full Text Available Problems of a public transport bus service in urban areas were analyzed. The aim of the article is to determine actual operational parameters of buses during passenger transportation in Zhytomyr. Ways of determining technical and operational parameters of buses were developed using visual and tabular methods of city buses real-time speed and acceleration performance registration by GPS-monitoring system with the help of a communicational and informational intelligent transport system of the city. Experimental studies of city buses motion parameters were presented. A comprehensive survey of passenger traffic and conditions of public transport functioning in Zhytomyr was carried out. The values of technical and operational parameters of buses on city routes were obtained. Preliminarily conclusions and recommendations considering the criteria for selecting the optimal rolling stock for a bus network of the city were suggested.

Missouri local technical assistance program at Missouri University of Science and Technology (formerly University of Missouri--Rolla) : annual progress report January-December 2007.

Science.gov (United States)

2009-02-01

This annual report is a summary of the activities during 2007 for the Missouri Local Technical Assistance Program (Missouri LTAP), which is located at Missouri University of Science and Technology. The report highlights Missouri LTAPs performance ...

Independent verification of a material balance at a LEU fuel fabrication plant. Program for technical assistance to IAEA safeguards

International Nuclear Information System (INIS)

Sorenson, R.J.; McSweeney, T.I.; Hartman, M.G.; Brouns, R.J.; Stewart, K.B.; Granquist, D.P.

1977-11-01

This report describes the application of methodology for planning an inspection according to the procedures of the International Atomic Energy Agency (IAEA), and an example evaluation of data representative of low-enriched uranium fuel fabrication facilities. Included are the inspection plan test criteria, the inspection sampling plans, the sample data collected during the inspection, acceptance testing of physical inventories with test equipment, material unaccounted for (MUF) evaluation, and quantitative statements of the results and conclusions that could be derived from the inspection. The analysis in this report demonstrates the application of inspection strategies which produce quantitative results. A facility model was used that is representative of large low-enriched uranium fuel fabrication plants with material flows, inventory sizes, and compositions of material representative of operating commercial facilities. The principal objective was to determine and illustrate the degree of assurance against a diversion of special nuclear materials (SNM) that can be achieved by an inspection and the verification of material flows and inventories. This work was performed as part of the USA program for technical assistance to the IAEA. 10 figs, 14 tables

Lowest Price, Technically Acceptable Evaluation Criteria Used in the November 2014 Request for Proposal for the Program Executive Office Soldier Systems Engineering and Technical Assistance (SETA) Contract

Science.gov (United States)

2017-09-01

GS-0895-09 Industrial Engineering Technician 23.04 7.56 GS-0810-09 Civil Engineering Developmental (Programming) 23.04 7.56 GS-0810-11 Civil ... Engineering –Programming 27.88 9.14 GS-0810-12 Civil Engineering –Design 33.41 10.96 GS-2210-09 Info Tech Spec (Network Systems/Customer Support) 23.04...USED IN THE NOVEMBER 2014 REQUEST FOR PROPOSAL FOR THE PROGRAM EXECUTIVE OFFICE SOLDIER SYSTEMS ENGINEERING AND TECHNICAL ASSISTANCE (SETA) CONTRACT

Renewable Energy Project Development Assistance (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2013-07-01

This fact sheet provides information on the Tribes selected to receive assistance from the U.S. Department of Energy Office of Indian Energy 2013 Strategic Technical Assistance Response Team (START) Program, which provides technical expertise to support the development of next-generation energy projects on tribal lands.

Insight into the da Vinci® Xi - technical notes for single-docking left-sided colorectal procedures.

Science.gov (United States)

Ngu, James Chi-Yong; Sim, Sarah; Yusof, Sulaiman; Ng, Chee-Yung; Wong, Andrew Siang-Yih

2017-12-01

The adoption of robot-assisted laparoscopic colorectal surgery has been hampered by issues with docking, operative duration, technical difficulties in multi-quadrant access, and cost. The da Vinci® Xi has been designed to overcome some of these limitations. We describe our experience with the system and offer technical insights to its application in left-sided colorectal procedures. Our initial series of left-sided robotic colorectal procedures was evaluated. Patient demographics and operative outcomes were recorded prospectively using a predefined database. Between March 2015 and April 2016, 54 cases of robot-assisted laparoscopic left-sided colorectal procedures were successfully completed with no cases of conversion. The majority were low anterior resections for colorectal malignancies. Using the da Vinci® Xi Surgical System, multi-quadrant surgery involving dissection from the splenic flexure to the pelvis was possible without redocking. The da Vinci® Xi simplifies the docking procedure and makes single-docking feasible for multi-quadrant left-sided colorectal procedures. Copyright © 2016 John Wiley & Sons, Ltd.

7 CFR 3430.55 - Technical reporting.

Science.gov (United States)

2010-01-01

... required to submit other technical reports or submit the CRIS reports more frequently than annually... 7 Agriculture 15 2010-01-01 2010-01-01 false Technical reporting. 3430.55 Section 3430.55... ASSISTANCE PROGRAMS-GENERAL AWARD ADMINISTRATIVE PROVISIONS Post-Award and Closeout § 3430.55 Technical...

Relationship between intraoperative non-technical performance and technical events in bariatric surgery.

Science.gov (United States)

Fecso, A B; Kuzulugil, S S; Babaoglu, C; Bener, A B; Grantcharov, T P

2018-03-30

The operating theatre is a unique environment with complex team interactions, where technical and non-technical performance affect patient outcomes. The correlation between technical and non-technical performance, however, remains underinvestigated. The purpose of this study was to explore these interactions in the operating theatre. A prospective single-centre observational study was conducted at a tertiary academic medical centre. One surgeon and three fellows participated as main operators. All patients who underwent a laparoscopic Roux-en-Y gastric bypass and had the procedures captured using the Operating Room Black Box ® platform were included. Technical assessment was performed using the Objective Structured Assessment of Technical Skills and Generic Error Rating Tool instruments. For non-technical assessment, the Non-Technical Skills for Surgeons (NOTSS) and Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) tools were used. Spearman rank-order correlation and N-gram statistics were conducted. Fifty-six patients were included in the study and 90 procedural steps (gastrojejunostomy and jejunojejunostomy) were analysed. There was a moderate to strong correlation between technical adverse events (r s  = 0·417-0·687), rectifications (r s  = 0·380-0·768) and non-technical performance of the surgical and nursing teams (NOTSS and SPLINTS). N-gram statistics showed that after technical errors, events and prior rectifications, the staff surgeon and the scrub nurse exhibited the most positive non-technical behaviours, irrespective of operator (staff surgeon or fellow). This study demonstrated that technical and non-technical performances are related, on both an individual and a team level. Valuable data can be obtained around intraoperative errors, events and rectifications. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

72201 - Temporary reduction of resources for technical infrastructure (TI) operation (ex TCR)

CERN Multimedia

Peter Sollander

2005-01-01

For a period of two years starting on 1 April 2005, the technical infrastructure will be supervised by a single TI operator rather than two. Initially, this operator will not be able to leave the control room for on-site interventions. Only stand-by staff will be available for breakdown repairs and, as a result, intervention times outside normal working hours are liable to increase. Response times on the 72201 phone number may similarly increase. All requests for breakdown repairs may be sent to the new e-mail address: service-ti@cern.ch; the old address - tcr@cern.ch - will stay in operation. Thank you for your understanding. Peter Sollander AB/OP/TI

Technical Condition of Earthen Dams at Nizhegorodskaya HPP After 60 Years of Operation

Energy Technology Data Exchange (ETDEWEB)

Kuznetsov, V. S., E-mail: kuznetsovVS@vniig.ru; Ladenko, S. Yu., E-mail: ladenko@yandex.ru [B. E. Vedeneev All-Russian Research Institute of Hydraulic Engineering (JSC) (Russian Federation)

2016-03-15

The complex of hydraulic engineering installations includes five earthen dams. All facilities are of Class I. The diagnostic parameters of dam operation and technical condition monitored via in-situ observation for seepage mode, seepage strength, settlement, static stability, etc. generally meet design assumptions and safety criteria. Despite individual defects and signs of “aging” identified over the period of earthen dam operation, these are currently in a satisfactory and operable state. The long, 60-year operating period of the dams with no serious overhauls or emergencies has demonstrated the high reliability of the facilities, the correctness of the design and technological solutions adopted and implemented in the construction, and the high professional level of their operation in close cooperation with science.

The technical support organization at BNL is twenty years old

International Nuclear Information System (INIS)

Indusi, J.P.

1988-01-01

The Technical Support Organization was established by the Atomic Energy Commission in January 1968 at Brookhaven National Laboratory (BNL). The original idea came from a small group of scientists at BNL. The group included Willy Higinbotham, Herb Kouts, Frank Miles, Richard Dodson, and Gerhardt Friedlander. The AEC endorsed the idea of a technical support group to provide technical assistance to AEC's Office of Safeguards and Materials Management and they sent requests for expressions of interest throughout the complex. For a number of reasons, to be discussed in the paper, the Technical Support Organization was established at BNL. An early project was the Conceptual Design for Safeguarding Nuclear Material which formed the first logical and systematic description of the integration of several elements into a safeguards system for protecting nuclear materials. Many other projects were undertaken over the years. TSO today provides technical assistance to the DOE Office of Safeguards and Secuirty, the Office of Classification and Technology Policy, and the Office of Security Evaluations. Technical support to the IAEA is provided under the Program of Technical Assistance to Agency Safeguards (POTAS). Recently, TSO began a program of technical assistance to the Air Force Weapons Laboratory in the area of nuclear systems security

Unusual occurrences during LMFR operation. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

2000-10-01

Design of liquid metal cooled fast reactors (LMFRs) is still in evolution, and only a small number of LMFRs are in operation around the world. Specialists operating these LMFRs have gained valuable experience from incidents, failures, and other events that took place in the reactors. These unusual occurrences, lessons learned and measures undertaken to prevent recurrences are often either not reported in the literature, or reported only briefly and without sufficient detail. Hence there is a need for specialists designing and operating LMFRs to share their knowledge on unusual occurrences. Considerable experimental and theoretical knowledge in this field were collected by several Member states over the past decades. The needs in generalisation, review and documentation of fundamental knowledge in liquid metal cooled reactor technology were a major consideration in the recommendation by the International Working group on fast reactors for the IAEA to convene this Technical Committee meeting on the subject of unusual occurrences during LMFR operation and the consequences for reactor systems

The role of technical assistance in the replication of effective HIV interventions.

Science.gov (United States)

O'Donnell, L; Scattergood, P; Adler, M; Doval, A S; Barker, M; Kelly, J A; Kegeles, S M; Rebchook, G M; Adams, J; Terry, M A; Neumann, M S

2000-01-01

This article examines the role of technical assistance (TA) in supporting the replication of proven HIV interventions. A case study of the replication of the VOICES/VOCES intervention elucidates the level and types of TA provided to support new users through the adoption process. TA included help in garnering administrative support, identifying target audiences, recruiting groups for sessions, maintaining fidelity to the intervention's core elements, tailoring the intervention to meet clients' needs, strengthening staff members' facilitation skills, troubleshooting challenges, and devising strategies to sustain the intervention. Two to four hours per month of TA were provided to each agency adopting the intervention, at an estimated monthly cost of $206 to $412. Findings illustrate how TA supports replication by establishing a conversation between the researcher TA providers experienced with the intervention and new users. This communication helps preserve key program elements and contributes to ongoing refinement of the intervention.

Development and Technical Validation of the Mobile Based Assistive Listening System: A Smartphone-Based Remote Microphone.

Science.gov (United States)

Lopez, Esteban Alejandro; Costa, Orozimbo Alves; Ferrari, Deborah Viviane

2016-10-01

The purpose of this research note is to describe the development and technical validation of the Mobile Based Assistive Listening System (MoBALS), a free-of-charge smartphone-based remote microphone application. MoBALS Version 1.0 was developed for Android (Version 2.1 or higher) and was coded with Java using Eclipse Indigo with the Android Software Development Kit. A Wi-Fi router with background traffic and 2 affordable smartphones were used for debugging and technical validation comprising, among other things, multicasting capability, data packet loss, and battery consumption. MoBALS requires at least 2 smartphones connected to the same Wi-Fi router for signal transmission and reception. Subscriber identity module cards or Internet connections are not needed. MoBALS can be used alone or connected to a hearing aid or cochlear implant via direct audio input. Maximum data packet loss was 99.28%, and minimum battery life was 5 hr. Other relevant design specifications and their implementation are described. MoBALS performed as a remote microphone with enhanced accessibility features and avoids overhead expenses by using already-available and affordable technology. The further development and technical revalidation of MoBALS will be followed by clinical evaluation with persons with hearing impairment.

Design and performance evaluation of collision protection-based safety operation for a haptic robot-assisted catheter operating system.

Science.gov (United States)

Zhang, Linshuai; Guo, Shuxiang; Yu, Huadong; Song, Yu; Tamiya, Takashi; Hirata, Hideyuki; Ishihara, Hidenori

2018-02-23

The robot-assisted catheter system can increase operating distance thus preventing the exposure radiation of the surgeon to X-ray for endovascular catheterization. However, few designs have considered the collision protection between the catheter tip and the vessel wall. This paper presents a novel catheter operating system based on tissue protection to prevent vessel puncture caused by collision. The integrated haptic interface not only allows the operator to feel the real force feedback, but also combines with the newly proposed collision protection mechanism (CPM) to mitigate the collision trauma. The CPM can release the catheter quickly when the measured force exceeds a certain threshold, so as to avoid the vessel puncture. A significant advantage is that the proposed mechanism can adjust the protection threshold in real time by the current according to the actual characteristics of the blood vessel. To verify the effectiveness of the tissue protection by the system, the evaluation experiments in vitro were carried out. The results show that the further collision damage can be effectively prevented by the CPM, which implies the realization of relative safe catheterization. This research provides some insights into the functional improvements of safe and reliable robot-assisted catheter systems.

Nuklearna Elektrarna Krskoanaging Technical Documentation for the 'Rightsized' 90's and Beyond

International Nuclear Information System (INIS)

Gradisar, D.; Freeland, K. R.

1996-01-01

Nuklearna Elektrarna Krsko was constructed as a turnkey plant, entering commercial service in 1981. NEK operates the plant with a unique management philosophy which has adapted well to the demands of today's business environment. Contributing to this success has been the NEK Management Information System (MIS) that has assisted NEK in 'making more with less'. A key element of the MIS is the Technical Document system, which includes the DCM (Document Control Module) and QRM (Quality Records Management), enabling the successful retrofit of the existing document management and 'turnkey' plant records environment to a new, thoroughly integrated system controlling plant operation and configuration management. The system integrates the Engineering Equipment and Configuration Management data systems, providing immediate, realtime cross-reference of plant equipment and plant modifications with technical documentation. (author)

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

Science.gov (United States)

Selwitz, Jason Lawrence

2017-01-01

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum…

Implementing assessments of robot-assisted technical skill in urological education: a systematic review and synthesis of the validity evidence.

Science.gov (United States)

Goldenberg, Mitchell G; Lee, Jason Y; Kwong, Jethro C C; Grantcharov, Teodor P; Costello, Anthony

2018-03-31

To systematically review and synthesise the validity evidence supporting intraoperative and simulation-based assessments of technical skill in urological robot-assisted surgery (RAS), and make evidence-based recommendations for the implementation of these assessments in urological training. A literature search of the Medline, PsycINFO and Embase databases was performed. Articles using technical skill and simulation-based assessments in RAS were abstracted. Only studies involving urology trainees or faculty were included in the final analysis. Multiple tools for the assessment of technical robotic skill have been published, with mixed sources of validity evidence to support their use. These evaluations have been used in both the ex vivo and in vivo settings. Performance evaluations range from global rating scales to psychometrics, and assessments are carried out through automation, expert analysts, and crowdsourcing. There have been rapid expansions in approaches to RAS technical skills assessment, both in simulated and clinical settings. Alternative approaches to assessment in RAS, such as crowdsourcing and psychometrics, remain under investigation. Evidence to support the use of these metrics in high-stakes decisions is likely insufficient at present. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

iPod touch-assisted instrumentation of the spine: a technical report.

Science.gov (United States)

Jost, Gregory F; Bisson, Erica F; Schmidt, Meic H

2013-12-01

Instrumentation of the spine depends on choosing the correct insertion angles to implant screws. Although modern image guidance facilitates precise instrumentation of the spine, the equipment is costly and availability is limited. Although most surgeons use lateral fluoroscopy to guide instrumentation in the sagittal plane, the lateromedial angulation is often chosen by estimation. To overcome the associated uncertainty, iPod touch-based applications for measuring angles can be used to assist with screw implantation. To evaluate the use of the iPod touch to adjust instruments to the optimal axial insertion angle for placement of pedicle screws in the lumbar spine. Twenty lumbar pedicle screws in 5 consecutive patients were implanted using the iPod touch. The lateromedial angulation was measured on preoperative images and reproduced in the operative field with the iPod touch. The instruments to implant the screws were aligned with the side of the iPod for screw insertion. Actual screw angles were remeasured on postoperative imaging. We collected demographic, clinical, and operative data for each patient. In 16 of 20 screws, the accuracy of implantation was within 3 degrees of the ideal trajectory. The 4 screws with an angle mismatch of 7 to 13 degrees were all implanted at the caudal end of the exposure, where maintaining the planned angulation was impeded by strong muscles pushing medially. iPod touch-assisted instrumentation of the spine is a very simple technique, which, in combination with a lateral fluoroscopy, may guide placement of pedicle screws in the lumbar spine.

Technical specifications manual for the MARK-1 pulsed ionizing radiation detection system. Volume 1

Energy Technology Data Exchange (ETDEWEB)

Lawrence, R.S.; Harker, Y.D.; Jones, J.L.; Hoggan, J.M.

1993-03-01

The MARK-1 detection system was developed by the Idaho National Engineering Laboratory for the US Department of Energy Office of Arms Control and Nonproliferation. The completely portable system was designed for the detection and analysis of intense photon emissions from pulsed ionizing radiation sources. This manual presents the technical design specifications for the MARK-1 detection system and was written primarily to assist the support or service technician in the service, calibration, and repair of the system. The manual presents the general detection system theory, the MARK-1 component design specifications, the acquisition and control software, the data processing sequence, and the system calibration procedure. A second manual entitled: Volume 2: Operations Manual for the MARK-1 Pulsed Ionizing Radiation Detection System (USDOE Report WINCO-1108, September 1992) provides a general operational description of the MARK-1 detection system. The Operations Manual was written primarily to assist the field operator in system operations and analysis of the data.

Teamwork, communication, and anaesthetic assistance in Scotland.

Science.gov (United States)

Rutherford, J S; Flin, R; Mitchell, L

2012-07-01

Teamwork involves supporting others, solving conflicts, exchanging information, and co-ordinating activities. This article describes the results of interviews with anaesthetic assistants (n=22) and consultant anaesthetists (n=11), investigating the non-technical skills involved in the effective teamwork of the anaesthetic assistants in the operating theatre. Anaesthetic assistants most commonly saw themselves as either being part of a theatre team or an anaesthetic subgroup and most commonly described the senior theatre nurse as their team leader. Examples of supporting others included the following: checking equipment, providing equipment, being a second pair of eyes, providing emotional and decision support, and supporting trainee anaesthetists. Of the 19 anaesthetic assistants who were asked if they would speak up if they disagreed with a decision in theatre, only 14 said that they would voice their concerns, and the most common approach was to ask for the logic behind the decision. The WHO checklist was described as prompting some anaesthetists to describe their anaesthetic plan to the anaesthetic assistant, when previously the anaesthetist would have failed to communicate their intentions in time for equipment to be prepared. The prioritization of activities to achieve co-ordination and the anaesthetic assistants becoming familiar with the idiosyncrasies of their regular anaesthetists were also described by anaesthetic assistants.

Technical support for universal health coverage pilots in Karnataka ...

International Development Research Centre (IDRC) Digital Library (Canada)

Technical support for universal health coverage pilots in Karnataka and Kerala. This project will provide evidence-based support to implement universal health coverage (UHC) pilot activities in two Indian states: Kerala and Karnataka. The project team will provide technical assistance to these early adopter states to assist ...

Evaluation of bilateral and multilateral defence co-operation and assistance / Najaf Gambarov

Index Scriptorium Estoniae

Gambarov, Najaf

2003-01-01

Ettekanne Aserbaidžaani sõjalis-poliitilisest koostööst välisriikide relvajõududega ja rahvusvaheliste organisatsioonidega 22.-23. septembrini 2003 Vilniuses toimunud seminaril "South Caucasus: making the best use of external assistance for stability building and for co-operation with NATO"

78 FR 25292 - Announcement of Funding Awards; Office of Native American Programs Training and Technical...

Science.gov (United States)

2013-04-30

... Awards; Office of Native American Programs Training and Technical Assistance; Fiscal Year 2012 AGENCY... (NOFA) for the Office of Native American Programs Training and Technical Assistance (ONAP T&TA). This... nonprofit organizations, as well as for-profit entities to provide Training & Technical Assistance to the...

Geothermal direct-heat utilization assistance. Quarterly project progress report, July 1996--September 1996. Federal Assistance Program

Energy Technology Data Exchange (ETDEWEB)

Lienau, P.

1996-11-01

This report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the fourth quarter of FY-96. It describes 152 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment, economics and resources. Research activities are summarized on greenhouse peaking. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, and progress monitor reports on geothermal resources and utilization.

Energy saving in the design and operation of fans; The development of technical literature for the specification of fume extraction systems

Energy Technology Data Exchange (ETDEWEB)

Gibbons, A [Plastic Fabrications and Environmental Technology Ltd., Armagh, Northern Ireland (United Kingdom)

1995-12-01

The processes involved in producing technical literature to assist in the selection of fans are discussed. Desktop publishing has been found to provide an effective method of matching the detail of the literature to the needs of the customer. (author)

PARAMETRIC DIAGNOSTICS OF THE CENTRIFUGAL SUPERCHARGER'S TECHNICAL CONDITION DURING OPERATION

Directory of Open Access Journals (Sweden)

Regina A. Khuramshina

2017-01-01

Full Text Available Abstract. Objectives The main aim is to develop a mathematical model of a centrifugal compressor and carry out a parametric diagnostics of a centrifugal supercharger's technical condition during operation. Methods  A model is proposed for calculating the thermodynamic properties of natural gas, reducing the parameters of a centrifugal compressor to the initial conditions and to the rotation frequency, as well as the integral indicators of the supercharger's technical state. The technical state of the gas path of the centrifugal supercharger of the compressor unit is determined by the parametric diagnostic method. Results  The software implementation of the mathematical model of centrifugal compressor is carried out using a DVIGwT PC. The analysis of calculations indicates that the model is appropriate, with the error being due to taking into account the properties of iso-butane and i-hexane, in contrast with the VNIIGAZ technique. The evaluation studies of a centrifugal compressor's state are indicative of the presence or absence of its defects. Conclusion  Among a number of the diagnostic methods for evaluating a centrifugal supercharger, the most effective is vibrodiagnostics. However, the search for malfunctions and nascent defects in the flowing part of the centrifugal compressor cannot be limited only to vibrodiagnostic data, which provides about 60% of the reliable information about the state of the gas-air tract. About 20% of the compressor's malfunctions and approximately half of the dangerous modes of the supercharger's flow-through part is detected using thermogasdynamic parametric analysis (parametric diagnostics. The main difficulty of the control over the technical state of the flow-through part of the centrifugal supercharger is in the complication of the quantitative evaluation of the processes taking place in the supercharger, which leads to problems in providing reliable diagnosis during a reasonable period of time.

Evaluation of bilateral and multilateral defence co-operation and assistance / Arthur Aghabekyan

Index Scriptorium Estoniae

Aghabekyan, Arthur

2003-01-01

Ettekanne Armeenia sõjalis-poliitilisest koostööst välisriikidega ja osalemisest rahvusvahelistes sõjalistes koostööprogrammides 22.-23. septembrini 2003 Vilniuses toimunud seminaril "South Caucasus: making the best use of external assistance for stability building and for co-operation with NATO"

7 CFR 652.4 - Technical service standards.

Science.gov (United States)

2010-01-01

... technologies and practices. (c) A technical service provider must assume responsibility in writing for the... 7 Agriculture 6 2010-01-01 2010-01-01 false Technical service standards. 652.4 Section 652.4..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.4...

The relationship between type of secondary education and subject choice with technically oriented aptitudes for automotive operators

Directory of Open Access Journals (Sweden)

Juliet I. Puchert

2017-10-01

Full Text Available Orientation: The central theme of this study attends to the role of secondary education in relation to two broad categories of specific aptitudes (psychomotor and spatial abilities. Utilising type of secondary education (incorporating subject choice could be a crucial selection mechanism for high-volume, entry-level technical positions. Research purpose: The objective of this research was to investigate whether the type of secondary education (incorporating subject choice could be used as a proxy for psychomotor (dexterity and coordination and/or spatial (ability to mentally assemble representations and spatial perception 2-D and 3-D aptitudes in the selection of operators for an automotive plant in South Africa. Motivation for the study: The motivation for this study arose from the evident gap in academic literature as well as the selection needs of the automotive industry. Research design, approach and method: A quantitative approach with a cross-sectional research design was used with a convenience sample (n = 1566 of work-seeking applicants for automotive operator positions in South Africa. These applicants completed a biographical questionnaire and five sub-tests from the Trade Aptitude Test Battery. The Chi-square test was used to determine the association between form of Grade 12 qualification and selected technical aptitudes. Main findings: Statistically and practically significant relationships were found between type of secondary education (incorporating subject choice, eye–hand coordination and spatial visualisation. Broad performance levels in the five aptitude instruments employed in this study were significantly associated with the type of matriculation certificate held by applicants. Specifically, types of secondary education that included mathematics and/or science as subjects were associated with higher levels of performance in the five specific aptitudes. Practical/managerial implications: The type of secondary education

Nuklearna Elektrarna Krsko: managing technical documentation for the 'rightsized' 90's and beyond

International Nuclear Information System (INIS)

Gradisar, D.; Freeland, K.R.

1996-01-01

Nuklearna Elektrarna Krsko (NEK) was constructed as a turnkey plant, entering commercial service in 1981. NEK operates the plant with a unique management philosophy which has adapted well to the demands of today's business environment. Contributing to this success has been the NEK Management Information System (MIS) that has assisted NEK in 'making more with less'. A key element of the MIS is the Technical Document system, which includes the DCM (Document Control Module) and QRM (Quality Records Management), enabling the successful retrofit of the existing document management and 'turnkey' plant records environment to a new, thoroughly integrated system controlling plant operation and configuration management. The system integrates the Engineering Equipment and Configuration Management data systems, providing immediate, realtime cross-reference of plant equipment and plant modifications with technical documentation. (author)

The Agency's technical co-operation programme with Ecuador 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Ecuador carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Thailand 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Thailand carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Malaysia 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Malaysia carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Pakistan 1985-1995 country programme summaries

International Nuclear Information System (INIS)

1995-01-01

This report contains a review of the Agency's technical co-operation activities in Pakistan carried out during 1985-1995. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Nigeria 1986-1996 country programme summaries

International Nuclear Information System (INIS)

1996-01-01

This report contains a review of the Agency's technical co-operation activities in Nigeria carried out during 1986-1996. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Colombia 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Colombia carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Portugal 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Portugal carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Jamaica 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Jamaica carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Bolivia 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Bolivia carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Panama 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Panama carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Bangladesh 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Bangladesh carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Panama 1985-1995 country programme summaries

International Nuclear Information System (INIS)

1995-01-01

This report contains a review of the Agency's technical co-operation activities in Panama carried out during 1985-1995. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Guatemala 1985-1995 country programme summaries

International Nuclear Information System (INIS)

1995-01-01

This report contains a review of the Agency's technical co-operation activities in Guatemala carried out during 1985-1995. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Iceland 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Iceland carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Bangladesh 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Bangladesh carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Cyprus 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Cyprus carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Albania 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Albania carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Indonesia 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Indonesia carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Poland 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Poland carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Romania 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Romania carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Greece 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Greece carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Nicaragua 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Nicaragua carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Afghanistan 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Afghanistan carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Bolivia 1986-1996 country programme summaries

International Nuclear Information System (INIS)

1996-01-01

This report contains a review of the Agency's technical co-operation activities in Bolivia carried out during 1986-1996. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Myanmar 1985-1995 country programme summaries

International Nuclear Information System (INIS)

1995-01-01

This report contains a review of the Agency's technical co-operation activities in Myanmar carried out during 1985-1995. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Jordan 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Jordan carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Hungary 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Hungary carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Egypt 1985-1995 country programme summaries

International Nuclear Information System (INIS)

1995-01-01

This report contains a review of the Agency's technical co-operation activities in Egypt carried out during 1985-1995. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Mongolia 1985-1995 country programme summaries

International Nuclear Information System (INIS)

1995-01-01

This report contains a review of the Agency's technical co-operation activities in Mongolia carried out during 1985-1995. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Paraguay 1983-1993 country programme summaries

International Nuclear Information System (INIS)

1993-01-01

This report contains a review of the Agency's technical co-operation activities in Paraguay carried out during 1983-1993. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Mexico 1986-1996 country programme summaries

International Nuclear Information System (INIS)

1996-01-01

This report contains a review of the Agency's technical co-operation activities in Mexico carried out during 1986-1996. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

The Agency's technical co-operation programme with Paraguay 1984-1994 country programme summaries

International Nuclear Information System (INIS)

1994-01-01

This report contains a review of the Agency's technical co-operation activities in Paraguay carried out during 1984-1994. In terms of coverage and analytical depth, country programmes summaries stand somewhere midway between in-depth country programme evaluations and individual project evaluations. They attempt to provide a comprehensive, descriptive picture of the Agency's co-operation with a Member State in a manner that will be particularly useful for programming decisions. The attempt is very much to describe - largely through statistical data - not to provide independent analysis and evaluation

Playing on strengths : technical innovations keep Canadian industry on top

International Nuclear Information System (INIS)

Harvie, W.

1997-01-01

The Western Canada Sedimentary Basin is one of Canada's major petroleum regions. Some fields in the region have been in production for 80 years. Since most of the major discoveries have been made, the challenge today is to use new technologies to find smaller reservoirs and to extract as much oil as possible from the depleting reserves. The following technical innovations were developed by Canadian companies for enhanced oil recovery: (1) steam assisted gravity drainage for heavy oil, (2) horizontal drilling, (3) coiled tube drilling, (4) single well steam assisted gravity drainage, (5) hydrocyclone technology in which briny water is sent down the borehole for reinjection and in which centrifugal force sends the lighter oil to the middle of the hydrocyclone where it is collected, and (6) portable top drives aimed at newer versions of large land drilling rigs and offshore operations. Multi-lateral techniques have also been used to increase production on heavy oil properties. These and other technical innovations are recognized as the single best advantage that Canadians have to offer the global marketplace. 4 figs

A Motion Control of a Robotic Walker for Continuous Assistance during Standing, Walking and Seating Operation

OpenAIRE

Chugo, Daisuke; Takase, Kunikatsu

2010-01-01

In this paper, we develop an active walker system for standing, walking and seating operation continuously which cooperates the developed standing assistance system with safety and stability. For realizing these conditions, our walker coordinates the assisting position cooperating the standing assistance manipulator according to the posture of the patient. Furthermore, our walker adjusts a seating position when the patient sit down which has high risk for falling down. Using our proposed syst...

International co-operation through scientific and technical nuclear societies

International Nuclear Information System (INIS)

Manning Muntzing, L.

1983-01-01

As an international organization the American Nuclear Society (ANS) has played an active role in international co-operation of nuclear technology exchange since its establishment in 1954. The ANS has a membership of over 13,000 individuals, of whom approximately 1200 live overseas in forty countries. To carry out the goals of the Society, local sections have been established. Currently the ANS maintains 48 local sections in the United States of America and 8 overseas local sections in Africa, Asia, Europe and South America. The ANS also has formal agreements for co-operation with The Asociacion Argentina de Tecnologia Nuclear (AATN), the Israel Nuclear Society (INS), and the Chinese Nuclear Society (CNS). In 1977 the Japan Atomic Energy Society (JAES), the European Nuclear Society (ENS), and the ANS co-operation in sponsoring the First International Conference on Transfer of Nuclear Technology (ICONTT I) in Tehran, Iran. In 1982, the Second International Conference on Transfer of Nuclear Technology (ICONTT II), Buenos Aires, Argentina, was sponsored through the co-operation of the AATN, the ENS and the ANS. The ANS and its overseas sections sponsor the Pacific Basin Conference approximately every three years to discuss nuclear matters of concern to the countries around the Pacific Ocean. In 1981 the ANS held a Nuclear Technology Exhibit in Beijing, the People's Republic of China. In addition to meetings, the ANS is extensively involved in the co-operative exchange of applied nuclear research information through its publications. Nuclear Technology, a technical journal, is published monthly under joint ownership of the ENS and the ANS. The ANS has been a leader in voluntary standards development since 1958. In its dedication to the co-operation of international nuclear technology the ANS maintains a comprehensive international exchange of nuclear standards

Areas and programmes of technical assistance

International Nuclear Information System (INIS)

1998-01-01

The cooperation between the Atomic Energy Commission of Costa Rica, and the International Atomic Energy Agency, has permitted to carry out programmes and projects which agree with the national objectives of development. In the areas of environmental hydrology; physical sciences and chemistry; industry and geological sciences; health and animal production; biological sciences, agriculture and alimentation; scientific and technical information. (author) [es

Geothermal direct-heat utilization assistance: Federal assistance program. Quarterly project progress report, October--December 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

The report summarizes geothermal technical assistance, R&D and technology transfer activities of the Geo-Heat Center at Oregon Institute of Technology for the first quarter of FY-96. It describes 90 contacts with parties during this period related to technical assistance with geothermal direct heat projects. Areas dealt with include geothermal heat pumps, space heating, greenhouses, aquaculture, equipment and resources. Research activities are summarized on low-temperature resource assessment, geothermal district heating system cost evaluation and silica waste utilization project. Outreach activities include the publication of a geothermal direct use Bulletin, dissemination of information, geothermal library, technical papers and seminars, development of a webpage, and progress monitor reports on geothermal resources and utilization.

Technical progress, the concept of individualized cancer treatment and the innovation of computer-assisted radiotherapy planning

International Nuclear Information System (INIS)

Merkle, K.; Tanneberger, S.; Matschke, S.

1985-01-01

After a first step of cancerogenesis, the further development of the tumor is an individual process. At the end of this process the tumor is formed as an individual in the individual. The individuality of cancer exists on the level of organs, tissues and cells and includes an individual tumor-host relationship. Today, optimized cancer treatment requires a most precise biological characterization possible of the tumor and of the tumor-host relationship, which will provide objective information about the individual character of every tumor. Routine analysis and strict therapeutic consideration of the clinical and biological individuality of human cancer can offer real chances for the improvement of cancer treatment. A routine acquisition of individual tumor characteristics will be possible only if methods and equipment are available for the registration of suitable parameters. In this context technical innovations have an essential influence on the realization of the concept of individualized cancer treatment. With the method of flow cytophotometry and other techniques examples are given in how far the ideas of individual cancer management can be realized by introduction of new technical solutions into medical research and clinical practice. Unfortunately there is still a lack of methodology in individualizing cancer treatment. The individualization of radiotherapy is connected to an extremely high degree of technical innovations. Particularly this refers to the topometrical description of the target volume in relation to the adjacent anatomical structures and the body contour as well as the fitting of isodoses to the shape and size of the target volume. As an example of innovation of a technical solution for individual radiotherapy planning the computer-assisted radiotherapy planning system DOPSY is described. (author)

Drive Control Scheme of Electric Power Assisted Wheelchair Based on Neural Network Learning of Human Wheelchair Operation Characteristics

Science.gov (United States)

Tanohata, Naoki; Seki, Hirokazu

This paper describes a novel drive control scheme of electric power assisted wheelchairs based on neural network learning of human wheelchair operation characteristics. “Electric power assisted wheelchair” which enhances the drive force of the operator by employing electric motors is expected to be widely used as a mobility support system for elderly and disabled people. However, some handicapped people with paralysis of the muscles of one side of the body cannot maneuver the wheelchair as desired because of the difference in the right and left input force. Therefore, this study proposes a neural network learning system of such human wheelchair operation characteristics and a drive control scheme with variable distribution and assistance ratios. Some driving experiments will be performed to confirm the effectiveness of the proposed control system.

U.S. assistance enhancing safety culture in countries operating Soviet-designed reactors

International Nuclear Information System (INIS)

Guppy, J.G.; Horak, W.C.; Reisman, A.W.

1995-01-01

The United States Department of Energy (USDOE) is managing the International Nuclear Safety Program (INSP), which is aimed at providing assistance to enhance safety at commercial nuclear power plants (NPPS) in Russia and Ukraine, as well as Central European countries (CEC). The funding for this program has been provided by the US Agency for International Development (AID). Brookhaven National Laboratory has been assisting DOE in certain portions of this program. The enhancement of safety culture is one of the most important goals of the joint International Nuclear Safety Program. In terms of the INSP, safety culture is comprised of two major components; (1) an environment that is a function of regulations, management sensitivity and structure; and (2) an individual commitment to safety in the day to day execution of activities in terms of thought and accountability. The long term impact of the INSP activities can only be measured by the effectiveness of strengthening safety culture within our partner counties. The strengthening of this culture will manifest in reduced risk of a nuclear accident long after other evidence of the INSP activities has disappeared. One area within the INSP, which has already led to a number of successful specific projects, is under the plant safety upgrade activities. Here, the US and the partner countries jointly identify specific target areas for the INSP efforts. Each identified area has a major component involving safety culture enhancement. With any direct involvement in the particular assistance activities, areas are identified to include a need for training. As technical experts and management from the partner country are assisted in addressing the identified needs, the training programs are provided which will not only address the specific need at hand, but will also teach skills which can be applied to different, but related needs that may exist or develop

Taking care of you and care for others: an analysis of the activity of the work of technical and nursing assistants of a psychiatric institution for children and adolescents.

Science.gov (United States)

Mendes, Davidson Passos; Moraes, Geraldo Fabiano de Souza; Mendes, Juliana Cristina de Lima

2012-01-01

Our objective in this study, the analysis of potential fields of risk management in nursing work in psychiatric care to adolescents and children, while settings that go from the relationship between technical and organizational determinants of work activity and the skills of operators. It was established focus on the work process of the Technical and Nursing Assistants to seek for response elements in an attempt to understand the health-disease process experienced by these workers. It was used for analysis and data collection, through the method of Ergonomic Work Analysis (EWA), fifteen workers of nursing staff - T&NA, between effectives and contractors, and the strategies of action and regulation of these workers in relation to the interface that they deal with. The results show that the workers are exposed to all charges in an intense and specific way, causing physical and mental wear, as it approaches the psychological distress, exposure to the psychic pressure, not only through contact with the object of work, but the complexity of these relationships that are involved in nursing staff.

Steady state operation of tokamaks. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

2000-10-01

The first IAEA Technical Committee Meeting (TCM) on Steady State Operation of Tokamaks was organized to discuss the operations of present long-pulse tokamaks (TRIAM-1M, TORE SUPRA, MT-7, HT-7M, HL-1M) and the plans for future steady-state tokamaks such as SST-1, CIEL, and HT-7U. This meeting, held from 13-15 October 1998, was hosted by the Academia Sinica Institute of Plasma Physics (ASIPP), Hefei, China. Participants from China, France, India, Japan, the Russian Federation, and the IAEA participated in the meeting. There were 18 individual presentations plus general discussions on many topics, including superconducting magnet systems, cryogenics, plasma position control, non-inductive current drive, auxiliary heating, plasma-wall interactions, high heat flux components, particle control, and data acquisition

Works Technical Department progress report, March 1961

Energy Technology Data Exchange (ETDEWEB)

None

1961-04-19

This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

Dolphin-Assisted Therapy as a Verbal Operant Condition for Children with Autism

Science.gov (United States)

Terrasi, Renee Marie

2007-01-01

This study examined the effects of Dolphin-Assisted Therapy (DAT) as a reinforcer for verbal operant production in children with Autism Spectrum Disorder. Three children who attended a dolphin therapy program participated in this single subject research study. Baseline data was collected for each child via a video tape provided by parents and…

STDAC: Solar Thermal Design Assistance Center annual report fiscal year 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

The Solar Thermal Design Assistance Center (STDAC) at Sandia is a resource provided by the DOE Solar Thermal Program. The STDAC`s major objective is to accelerate the use of solar thermal systems by providing direct technical assistance to users in industry, government, and foreign countries; cooperating with industry to test, evaluate, and develop renewable energy systems and components; and educating public and private professionals, administrators, and decision makers. This FY94 report highlights the activities and accomplishments of the STDAC. In 1994, the STDAC continued to provide significant direct technical assistance to domestic and international organizations in industry, government, and education, Applying solar thermal technology to solve energy problems is a vital element of direct technical assistance. The STDAC provides information on the status of new, existing, and developing solar technologies; helps users screen applications; predicts the performance of components and systems; and incorporates the experience of Sandia`s solar energy personnel and facilities to provide expert guidance. The STDAC directly enhances the US solar industry`s ability to successfully bring improved systems to the marketplace. By collaborating with Sandia`s Photovoltaic Design Assistance Center and the National Renewable Energy Laboratory the STDAC is able to offer each customer complete service in applying solar thermal technology. At the National Solar Thermal Test Facility the STDAC tests and evaluates new and innovative solar thermal technologies. Evaluations are conducted in dose cooperation with manufacturers, and the results are used to improve the product and/or quantify its performance characteristics. Manufacturers, in turn, benefit from the improved design, economic performance, and operation of their solar thermal technology. The STDAC provides cost sharing and in-kind service to manufacturers in the development and improvement of solar technology.

3-Dimensional printing guide template assisted percutaneous vertebroplasty: Technical note.

Science.gov (United States)

Li, Jian; Lin, JiSheng; Yang, Yong; Xu, JunChuan; Fei, Qi

2018-06-01

Percutaneous vertebroplasty (PVP) is currently considered as an effective treatment for pain caused by acute osteoporotic vertebral compression fracture. Recently, puncture-related complications are increasingly reported. It's important to find a precise technique to reduce the puncture-related complications. We report a case and discussed the novel surgical technique with step-by-step operating procedures, to introduce the precise PVP assisted by a 3-dimensional printing guide template. Based on the preoperative CT scan and infrared scan data, a well-designed individual guide template could be established in a 3-dimensional reconstruction software and printed out by a 3-dimensional printer. In real operation, by matching the guide template to patient's back skin, cement needles' insertion orientation and depth were easily established. Only 14 times C-arm fluoroscopy with HDF mode (total exposure dose was 4.5 mSv) were required during the procedure. The operation took only 17 min. Cement distribution in the vertebral body was very good without any puncture-related complications. Pain was significantly relieved after surgery. In conclusion, the novel precise 3-dimensional printing guide template system may allow (1) comprehensive visualization of the fractured vertebral body and the individual surgical planning, (2) the perfect fitting between skin and guide template to ensure the puncture stability and accuracy, and (3) increased puncture precision and decreased puncture-related complications, surgical time and radiation exposure. Copyright © 2018 Elsevier Ltd. All rights reserved.

Tribal Colleges and Universities/American Indian Research and Education Initiatives Advanced Manufacturing Technical Assistance Project

Energy Technology Data Exchange (ETDEWEB)

Atcitty, Stanley [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-02-01

The overall goal of this project is to establish a network of TCUs with essential advanced manufacturing (AM) facilities, associated training and education programs, and private sector and federal agency partnerships to both prepare an American Indian AM workforce and create economic and employment opportunities within Tribal communities through design, manufacturing, and marketing of high quality products. Some examples of high quality products involve next generation grid components such as mechanical energy storage, cabling for distribution of energy, and electrochemical energy storage enclosures. Sandia National Laboratories (Sandia) is tasked to provide technical advising, planning, and academic program development support for the TCU/American Indian Higher Education Consortium (AIHEC) Advanced Manufacturing Project. The TCUs include Bay Mills Community College (BMCC), Cankdeska Cikana Community College (CCCC), Navajo Technical University (NTU), Southwestern Indian Polytechnic Institute (SIPI), and Salish Kooteani College. AIHEC and Sandia, with collaboration from SIPI, will be establishing an 8-week summer institute on the SIPI campus during the summer of 2017. Up to 20 students from TCUs are anticipated to take part in the summer program. The goal of the program is to bring AM science, technology, engineering, and mathematics (STEM) awareness and opportunities for the American Indian students. Prior to the summer institute, Sandia will be providing reviews on curriculum plans at the each of the TCUs to ensure the content is consistent with current AM design and engineering practice. In addition, Sandia will provide technical assistance to each of the TCUs in regards to their current AM activities.

Independent Electricity Market Operator integration management participant technical reference manual

International Nuclear Information System (INIS)

1999-01-01

The document provides potential participants with the essential technical information to permit them to participate in the IMO-administered markets, and is not intended to be a complete technical reference manual for all issues within the realm of electricity production, distribution, or consumption. Written for the participants, it provides only that information which is relevant to the participant for interfacing with the IMO and participating in the market. Written as a generic guide, all the information contained within it may not be relevant to all the participants. The document's intent is to provide participants with a description of the various facilities and interfaces required by market participants to take part in the IMO-administered markets. The document supplements the market rules and provides installation, set-up, and configuration information for the various tools and facilities that will be required for market participation as a supplier, carrier/delivery (transmitter/distributor), generator, or consumer in the market. Aspects considered include: participant workstation specifications, dispatch workstation specification, message exchange, remote terminal unit specification, AGC operational RTU specification, real time network connection specification, telephone connection specification, revenue administration specification, funds administration specification, data catalogues, market information, power grid connection requirements, and appendices

Technical innovations at NPP Dukovany - for safe and efficient operation

International Nuclear Information System (INIS)

Sabata, M.; Vasa, I.

2000-01-01

Inherent features of the NPP Dukovany design provide a significant confidence in its nuclear safety assurance; among these features should be emphasised the reactor core stability and its control and protection system capability to hold the reactor in safe state following scram or accident conditions. Nevertheless, NPP Dukovany was designed in the early seventies, and current requirements for nuclear safety assurance are more strict and/or specific as a result of the technical development and lessons learned from nuclear accidents. The paper compares the safety design base established at the time of NPP Dukovany project implementation and the current reference design base. The paper also presents procedures applied to implement technical and operational measures which are introduced to fulfil the current basic safety criteria. The scope of such measures applied at NPP Dukovany is compared with that of EU countries introduced for the same reason - to meet the updated safety related requirements. Examples of some innovations already implemented or under implementation give an idea how NPP Dukovany proceeds in reaching the goal of harmonising its safety with the requirements to be met before the Czech Republic becomes a member country of the European Union. (author)

Improving integration and coordination of funding, technical assistance, and reporting/data collection: recommendations from CDC and USAPI stakeholders.

Science.gov (United States)

Ka'opua, Lana Sue I; White, Susan F; Rochester, Phyllis F; Holden, Debra J

2011-03-01

Current US Federal funding mechanisms may foster program silos that disable sharing of resources and information across programs within a larger system of public health services. Such silos present challenges to USAPI communities where human resources, health infrastructure, and health financing are limited. Integrative and coordinated approaches have been recommended. The CDC Pacific Islands Integration and Coordination project was initiated by the CDC Division of Cancer Prevention and Control (DCPC). The project aim was to identify ways for the CDC to collaborate with the USAPI in improving CDC activities and processes related to chronic disease. This article focuses on recommendations for improving coordination and integration in three core areas of health services programming: funding, program reporting/data collection and analysis, and technical assistance. Preliminary information on challenges and issues relevant to the core areas was gathered through site visits, focus groups, key informant interviews, and other sources. This information was used by stakeholder groups from the CDC and the USAPI to develop recommendations in the core programming areas. Recommendations generated at the CDC and USAPI stakeholder meetings were prepared into a single set of recommendations and stakeholders reviewed the document for accuracy prior to its dissemination to CDC's National Center for Chronic Disease Prevention and Health Promotion programs management and staff. Key recommendations, include: (1) consideration of resources and other challenges unique to the USAPI when reviewing funding applications, (2) consideration of ways to increase flexibility in USAPI use of program funds, (3) dedication of funding and human resources for technical assistance, (4) provision of opportunities for capacity-building across programs and jurisdictions, (5) consideration of ways to more directly link program reporting with technical assistance. This project provided a unique opportunity

Annual report on operation, utilization and technical development of research reactors and hot laboratory

International Nuclear Information System (INIS)

1990-09-01

This report describes the activities of the Department of Research Reactor Operation in fiscal year of 1989. It also presents some technical topics on the reactor operation and utilization in details. The Department is responsible for operation of the research reactors, JRR-2 and JRR-4, and the Hot Laboratory. The research reactor JRR-3 was reconstructed to enhance the performance for utilization. The first criticality was achieved on March 22, 1989, and it subsequently went into operation. In connection with the reactor operation, the various research and development activities in the area of fuel management, water chemistry, radiation monitoring and material irradiation have been made. In the Hot Laboratory, post-irradiation examinations of fuels and materials have been carried out along with the development of related techniques. (author)

Evolution of robotic nephrectomy for living donation: from hand-assisted to totally robotic technique.

Science.gov (United States)

Giacomoni, Alessandro; Di Sandro, Stefano; Lauterio, Andrea; Concone, Giacomo; Mangoni, Iacopo; Mihaylov, Plamen; Tripepi, Matteo; De Carlis, Luciano

2014-09-01

The application of robotic-assisted surgery offers EndoWrist instruments and 3-D visualization of the operative field, which are improvements over traditional laparoscopy. The results of the few studies published so far have shown that living donor nephrectomy using the robot-assisted technique is safe, feasible, and offers advantages to patients. Since November 2009, 16 patients have undergone robotic-assisted living donor nephrectomy at our Institute. Patients were divided into two groups according to the surgical technique adopted for the procedure: Group A, hand-assisted robotic nephrectomy (eight patients); Group B, totally robotic nephrectomy (eight patients). Intra-operative bleeding was similar in the two groups (90 vs 100 mL for Group A and B, respectively). Median warm ischemia time was significantly shorter in Group A (2.3 vs 5.1 min for Group A and B, respectively, P-value = 0.05). Switching to the open procedure was never required. Median operative time was not significantly longer in Group A than Group B (275 min vs 250 min, respectively). Robotic assisted living kidney recovery is a safe and effective procedure. Considering the overall technical, clinical, and feasibility aspects of living kidney donation, we believe that the robotic assisted technique is the method of choice for surgeon's comfort and donors' safety. Copyright © 2014 John Wiley & Sons, Ltd.

Solar-assisted biomass-district heating: projects in Austria and operational data; Solarunterstuetzte Biomasse-Fernwaermeversorgung: Projekte in Oesterreich und Betriebsdaten

Energy Technology Data Exchange (ETDEWEB)

Faninger, G. [Institut fuer Interdisziplinaere Forschung und Fortbildung der Universitaeten Klagenfurt, Innsbruck und Wien (IFF), Klagenfurt (Austria)

1998-12-31

In recent years small-volume biomass district heating systems (district heat grids) have attracted increasing interest in Austria. By the end of 1997 some 359 biomass-district heating systems with an overall capacity of approximately 483 MW were in operation. If a biomass-district heating plant and a solar plant are combined the solar plant can supply most of the heat required outside the heating season. At present Austria runs 12 solar-assisted biomass-district heating grids with collector areas between 225 square metres and 1,250 square metres. In order to run these biomass-district heating systems in an economically and technically efficient way it is necessary to assure high quality in terms of planning, construction and operation. A list of criteria is set up on the basis of first operational data in order to evaluate energy efficiency and economic performance. These criteria should be applied in order to ensure that energy, environment and economy are equally considered in the planning and construction of solar-assisted biomass-district heating plants. They should also be helpful for the approval procedures of projects. (orig.) [Deutsch] Kleinraeumige Biomasse-Fernwaermeanlagen (Nahwaermenetze) fanden in den letzten Jahren zunehmendes Interesse in Oesterreich. So waren Ende 1997 insgesamt 359 Biomasse-Fernwaermeanlagen mit einer installierten Gesamtleistung von etwa 483 MW in Betrieb. Die Kombination einer Biomasse-Fernwaermeanlage mit einer Solaranlage bringt den Vorteil, dass die Waermebereitstellung ausserhalb der Heizsaison zu einem hohen Anteil ueber die Solaranlage vorgenommen werden kann. Derzeit werden in Oesterreich 12 solarunterstuetzte Biomasse-Nahwaermenetze mit Kollektorflaechen von 225 m{sup 2} bis 1.250 m{sup 2} betrieben. Um einen moeglichst effizienten und damit auch wirtschaftlichen Betrieb von solarunterstuetzten Biomasse-Fernwaermeanlagen zu gewaehrleisten, werden hohe Anforderungen an Planung, Ausfuehrung und Betrieb gestellt. Auf der

Technical basis for the initiation and cessation of environmentally-assisted cracking of low-alloy steels in elevated temperature PWR environments

International Nuclear Information System (INIS)

James, L.A.

1997-01-01

The Section 11 Working Group on Flaw Evaluation of the ASME B and PV Code Committee is considering a Code Case to allow the determination of the conditions under which environmentally-assisted cracking of low-alloy steels could occur in PWR primary environments. This paper provides the technical support basis for such an EAC Initiation and Cessation Criterion by reviewing the theoretical and experimental information in support of the proposed Code Case

Technical basis for the initiation and cessation of environmentally-assisted cracking of low-alloy steels in elevated temperature PWR environments

Energy Technology Data Exchange (ETDEWEB)

James, L.A.

1997-10-01

The Section 11 Working Group on Flaw Evaluation of the ASME B and PV Code Committee is considering a Code Case to allow the determination of the conditions under which environmentally-assisted cracking of low-alloy steels could occur in PWR primary environments. This paper provides the technical support basis for such an EAC Initiation and Cessation Criterion by reviewing the theoretical and experimental information in support of the proposed Code Case.

Laparoscopy-Assisted Cystectomy: Management of a Large Ovarian Cyst with Torsion

Directory of Open Access Journals (Sweden)

Emin Üstunyurt