WorldWideScience

Sample records for assessing soluble scfv

  1. Flow cytometry-based methods for assessing soluble scFv activities and detecting pathogen antigens in solution

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Sean; Weigel, Kris M.; Miller, Keith D.; Ndung' u, Joseph; Buscher, Philippe; Tran, Thao N.; Baird, Cheryl L.; Cangelosi, Gerard A.

    2010-04-01

    Novel methods are reported for evaluating and utilizing single chain fragment variable (scFv) antibodies derived from yeast-display libraries. Yeast-display was used to select scFv specific to invariant surface glycoproteins (ISG) of Trypanosoma brucei. A limiting step in the isolation of scFv from nonimmune libraries is the conversion of highly active yeast-displayed scFv into soluble antibodies that can be used in standard immunoassays. Challenges include limited solubility or activity following secretion and purification of scFv. For this reason, few scFv derived from yeast-display platforms have moved into development and implementation as diagnostic reagents. To address this problem, assays were developed that employ both yeastdisplayed and secreted scFv as analytical reagents. The first is a competitive inhibition flow cytometry (CIFC) assay that detects secreted scFv by virtue of its ability to competitively inhibit the binding of biotinylated antigen to yeast-displayed scFv. The second is an epitope binning assay that uses secreted scFv toidentify additional yeast-displayed scFv that bind nonoverlapping or noncompeting epitopes on an antigen. The epitope binning assay was used not only to identify sandwich assay pairs with yeast-displayed scFv, but also to identify active soluble scFv present in low concentration in a crude expression extract. Finally, a CIFC assay was developed that bypasses entirely the need for soluble scFv expression, by using yeast displayed scFv to detect unlabeled antigen in samples. These methods will facilitate the continued development and practical implementation of scFv derived from yeast-display libraries.

  2. Expression and bioactivity identification of soluble MG7 scFv

    Institute of Scientific and Technical Information of China (English)

    Zhao-Cai Yu; Jie Ding; Bo-Rong Pan; Dai-Ming Fan; Xue-Yong Zhang

    2002-01-01

    AIM: To examine the molecular mass and identify thebioactivity of MG7 scFv for its application as a targetingmediator in gene therapy of gastric cancer.METHODS: Two strongly positive recombinant phage clonesscreened from MG7 recombinant phage antibody library wereseparately transfected into E. coli TG1. Plasmid wasisolated from the transfected E. coli TG1 and digested byEcoR Ⅰ and Hind Ⅲ to examine the length of exogenousscFv gene. Then, the positive recombinant phage cloneswere individually transfected into E. coli HB2151. Thetransfectant was cultured and induced by IPTG. Perplasmicextracts was prepared from the induced transfectant byosmotic shock. ELISA was used to examine the antigen-binding affinity of the soluble MG7 scFv. Immunodottingassay was adopted to evaluate the yield of soluble MG7 scFvproduced by transfected E. coli HB2151. Western blot wasused to examine the molecular mass of MG7 scFv. Finally,the nucleotide sequence of MG7 scFv was examined by DNAsequencing.RESULTS: Two positive recombinant phage clones werefound to contain the exogenous scFv gene. ELISA showedthat MG7 scFv had strong antigen-binding affinity.Immuodotting assay showed that transfected E. coli HB2151could successfully produce the soluble MG7 scFv with highyield via induction by IPTG. The molecular mass of MG7scFv was 30 kDa by western blot. DNA sequencingdemonstrated that the VH and VL genes of MG7 scFv were363bp and 321 bp, respectively.CONCLUSION: We have successfully developed the solubleMG7 scFv which possessed strong antigen-binding affinity.

  3. Re-engineering of the PAM1 phage display monoclonal antibody to produce a soluble, versatile anti-homogalacturonan scFv

    DEFF Research Database (Denmark)

    Manfield, I. W.; Bernal Giraldo, Adriana Jimena; Møller, I.;

    2006-01-01

    Antibody phage display is an increasingly important alternative method for the production of monoclonal antibodies (mAbs) and involves the expression of antibody fragments (scFvs) at the surface of bacteriophage particles. We have previously used this technique to generate a phage mAb (PAM1phage...... of the PAM1 mAb, we describe here the production of a phage-free, soluble scFv version of the PAM1 mAb (PAM1scFv). Using the new PAM1scFv probe, the occurrence of the HG epitope recognized can now be localized with high resolution within micro-domains of plant cell walls....

  4. Co-expression of Dsb proteins enables soluble expression of a single-chain variable fragment (scFv) against human type 1 insulin-like growth factor receptor (IGF-1R) in E. coli.

    Science.gov (United States)

    Sun, Xue-Wen; Wang, Xiao-Hua; Yao, Yan-Bing

    2014-12-01

    Type 1 insulin-like growth factor receptor (IGF-1R) is a promising therapeutic target for cancer treatment. A single-chain variable fragment (scFv) against human IGF-1R forms inclusion body when expressed in periplasmic space of E. coli routinely. Here, we described that co-expression of appropriate disulfide bonds (Dsb) proteins known to catalyze the formation and isomerization of Dsb can markedly recover the soluble expression of target scFv in E. coli. A 50 % recovery in solubility of the scFv was observed upon co-expression of DsbC alone, and a maximum solubility (80 %) was obtained when DsbA and DsbC were co-expressed in combination. Furthermore, the soluble scFv present full antigen-binding activity with IGF-1R, suggesting its correct folding. This study also suggested that the selection of Dsb proteins should be tested case-by-case if the approach of co-expression of Dsb system is adopted to address the problem of insoluble expression of proteins carrying Dsb.

  5. THE CONSTRUCTION AND EXPRESSION OF THE MURINE SCFV GENE IN E. COLI AGAINST HUMAN CERVICAL CANCER

    Institute of Scientific and Technical Information of China (English)

    Wang Ying; Chen Wei; Li Xu

    2006-01-01

    Objective To obtain the gene of murine Single chain Fv fragment (ScFv) against human cervical cancer and to express it in E. coli. Methods The variable region gene fragments of the heavy and light chains, which were amplified respectively using recombinant DNA techniques from CsA125 hybridoma cells, were spliced together through a flexible linker to ScFv against human cervical cancer. The ScFv genes were then cloned into expression vector pCANTAB 5E and expressed in E. coli HB2151 and TG1 respectively. The soluble ScFv were characterized by SDS PAGE and Western blot. The antigen-binding activities of the soluble and phage displayed ScFv were assayed by ELISA and cell immunohistochemical analysis. Results The expressed ScFv antibodies were soluble and phage displayed. The soluble ScFv secreted and expressed in E. coli HB2151 induced by IPTG were confirmed with SDS-PAGE, Western blot and ELISA. The specific binding capacity of the soluble and phage displayed ScFv to the surface associated antigen of human cervical cancer cell line was further confirmed with immunohistochemical studies. Conclusion The soluble and phage displayed ScFv expressed in E. coli against human cervical cancer showed high, specific affinity for the cervical cancer cell line surface associated antigen.

  6. 一种特异性识别斑马鱼卵黄蛋白原的噬菌体展示单链抗体的可溶性表达方案%Strategy for soluble expression of phage-displayed scFv antibody specific for zebrafish vitellogenin

    Institute of Scientific and Technical Information of China (English)

    饶瑜; 钟利桥; 张凤; 张晓华; 戴和平

    2011-01-01

    We developed a new method for soluble expression of phage-displayed scFv antibody specific for zebrafish vitellogenin. The scFv antibody F5 could bind zebrafish vitellogenin specifically in phage-displayed form but not soluble form. The gene of scFv antibody F5 was cloned into vector pET 32a and transferred into Escherichia coli ori DE3. With inducible expression, soluble scFv antibody 32a-F5 was obtained successfully and could also specifically bind to zebrafish vitellogenin. The insoluble expression of phage-displayed scFv antibody was a common problem in the practical use of phage display. This study offered a feasible way to express soluble scFv antibodies with biological activity.%为了实现特异性识别斑马鱼卵黄蛋白原的噬菌体展示单链抗体的可溶性表达,将不能以可溶性蛋白形式表达的、只能以噬菌体展示形式特异性识别斑马鱼卵黄蛋白原的单链抗体F5的基因,克隆到pET 32a载体并转化入大肠杆菌ori DE3中.结果表明,通过诱导表达,可获得可溶性的并且仍特异性识别斑马鱼卵黄蛋白原的单链抗体32a-F5.噬菌体展示单链抗体不能可溶性表达是噬菌体展示技术应用中常见的问题,该方法提供了一种表达可溶性单链抗体的可行性方案.

  7. Generation of anti-idiotype scFv for pharmacokinetic measurement in lymphoma patients treated with chimera anti-CD22 antibody SM03.

    Directory of Open Access Journals (Sweden)

    Qi Zhao

    Full Text Available Pre-clinical and clinical studies of therapeutic antibodies require highly specific reagents to examine their immune responses, bio-distributions, immunogenicity, and pharmacodynamics in patients. Selective antigen-mimicking anti-idiotype antibody facilitates the assessment of therapeutic antibody in the detection, quantitation and characterization of antibody immune responses. Using mouse specific degenerate primer pairs and splenocytic RNA, we generated an idiotype antibody-immunized phage-displayed scFv library in which an anti-idiotype antibody against the therapeutic chimera anti-CD22 antibody SM03 was isolated. The anti-idiotype scFv recognized the idiotype of anti-CD22 antibody and inhibited binding of SM03 to CD22 on Raji cell surface. The anti-idiotype scFv was subsequently classified as Ab2γ type. Moreover, our results also demonstrated firstly that the anti-idiotype scFv could be used for pharmacokinetic measurement of circulating residual antibody in lymphoma patients treated with chimera anti-CD22 monoclonal antibody SM03. Of important, the present approach could be easily adopted to generate anti-idiotype antibodies for therapeutic antibodies targeting membrane proteins, saving the cost and time for producing a soluble antigen.

  8. Isolation of anti-T cell receptor scFv mutants by yeast surface display.

    Science.gov (United States)

    Kieke, M C; Cho, B K; Boder, E T; Kranz, D M; Wittrup, K D

    1997-11-01

    Yeast surface display and sorting by flow cytometry have been used to isolate mutants of an scFv that is specific for the Vbeta8 region of the T cell receptor. Selection was based on equilibrium binding by two fluorescently labeled probes, a soluble Vbeta8 domain and an antibody to the c-myc epitope tag present at the carboxy-terminus of the scFv. The mutants that were selected in this screen included a scFv with threefold increased affinity for the Vbeta8 and scFv clones that were bound with reduced affinities by the anti-c-myc antibody. The latter finding indicates that the yeast display system may be used to map conformational epitopes, which cannot be revealed by standard peptide screens. Equilibrium antigen binding constants were estimated within the surface display format, allowing screening of isolated mutants without necessitating subcloning and soluble expression. Only a relatively small library of yeast cells (3 x 10[5]) displaying randomly mutagenized scFv was screened to identify these mutants, indicating that this system will provide a powerful tool for engineering the binding properties of eucaryotic secreted and cell surface proteins.

  9. Generation of a recombinant single-chain variable fragment (scFv) targeting 5-methyl-2'-deoxycytidine.

    Science.gov (United States)

    Ohshima, Motohiro; Tadakuma, Tomomi; Hayashi, Hideki; Inoue, Kazuyuki; Itoh, Kunihiko

    2010-01-01

    We generated a single-chain variable fragment (scFv) against 5-methyl-2'-deoxycytidine (m(5)dCyd) using phage display technology. The heavy and light chain variable region genes were amplified by the polymerase chain reaction (PCR) from hybridoma cell line FMC9 and assembled as an scFv fragment with a flexible linker (Gly(4)-Ser)(3). The scFv DNA fragment was then cloned into pCANTAB-5E, and a phage displaying the scFv was produced. Antigen-positive phage clones were successfully selected by enzyme-linked immunosorbent assay (ELISA). The scFv was modified with FLAG and His tags for detection and purification. The scFv reacted strongly with m(5)dCyd and weakly with 5-methylcytidine (m(5)Cyd) but not with cytidine (Cyd) and 1-methyladenosine in a manner similar to the monoclonal antibody (MoAb). Although the specificities of scFv and MoAb were almost identical, the sensitivity of the scFv (IC(50) 0.054 microg/ml) was approximately 80 times higher than that of the parent MoAb (IC(50) 4.27 microg/ml), determined by inhibition ELISA. As a biochemical application of this scFv, we quantified the m(5)dCyd content of genomic DNA by enzymatic hydrolysis using inhibition ELISA. The cancer cell lines HeLa, HeLa S3 and MDA-MB-453 contained approximately 1% of the methylated DNA in total genomic DNA, as did peripheral blood cell genomic DNA from healthy volunteers, but HT29 and T-47D showed hypomethylation compared with the HeLa, HeLa S3 and MDA-MB-453 cell lines. The scFv generated here may be applicable to the assessment of cellular DNA methylation levels and is more sensitive than the MoAb.

  10. Generation and Characterization of C305, a Murine Neutralizing scFv Antibody That Can Inhibit BLyS Binding to Its Receptor BCMA

    Institute of Scientific and Technical Information of China (English)

    Mei-Yun LIU; Wei HAN; Yan-Li DING; Tian-Hong ZHOU; Rui-Yang TIAN; Sheng-Li YANG; Hui LIU; Yi GONG

    2005-01-01

    B-lymphocyte stimulator (BLyS) is a member of the tumor necrosis factor (TNF) family and a key regulator of B cell response. Neutralizing single-chain fragment variable (scFv) antibody against BLyS binding to its receptor BCMA has the potential to play a prominent role in autoimmune disease therapy. A phage display scFv library constructed on pIII protein of M13 filamentous phage was screened using BLyS.After five rounds of panning, their binding activity was characterized by phage-ELISA. Nucleotide sequencing revealed that at least two different scFv gene fragments (C305 and D416) were obtained. The two different scFv gene fragments were expressed to obtain the soluble scFv antibodies, then the soluble scFv antibodies were characterized by means of competitive ELISA and in vitro neutralization assay. The results indicated that C305 is the neutralizing scFv antibody that can inhibit BLyS binding to its receptor BCMA.

  11. Construction, Expression and In Vitro Biological Behaviors of Ig scFv Fragment in Patients with Chronic B Cell Leukemia

    Institute of Scientific and Technical Information of China (English)

    ZHU Lijuan; LIAO Wenjun; ZHU Huifen; LEI Ping; WANG Zhihua; SHAO Jingfang; ZHANG Yue; SHEN Guanxin

    2006-01-01

    The expression vector of SmIg scFv fragment was constructed in patient with B cell chronic lymphocyte leukemia (B-CLL) and expressed in E. coli to obtain scFv fragment, and the effect of the protein on the proliferation of stimulated peripheral blood mononuclear cells (PBMC) was investigated in vitro. Two pairs of primers were designed, and variable region genes of light chain and heavy chain were amplified by PCR respectively from the pGEM-T vectors previously constructed in our laboratory which containing light chain gene or Fd fragment of heavy chain gene. The PCR product was digested, purified and inserted into pHEN2 vector to construct the soluble expression vector pHEN2-scFv. After the induction by IPTG, the scFv protein was identified by SDSPAGE electrophoresis and purified by Ni-NTA-Chromatography. MTT was used to determine the effect of purified protein on the proliferation of stimulated PBMC in vitro. Plasmid PCR and restriction enzyme digestion of pHEN2-scFv revealed the pHEN2-scFv vector was constructed successfully. Id-scFv protein was expressed in positive clone after induced by IPTG. SDS-PAGE analysis showed that the relative molecular weight of fusion protein was about 30 kD (1 kD=0.9921 ku),which was consistent with the theoretically predicted value. Proliferation of PBMC could be induced by purified Id-scFv. It was suggested that the expression vector of SmIg scFv fragment was constructed successfully, and scFv protein was expressed and secreted from E. coli, which could induce proliferation of PBMC. This may lay an experimental foundation for further research of IdHSP complex vaccine for B-CLL.

  12. 抗镰刀菌单链抗体在大肠杆菌中可溶性表达条件的研究%A Study on the Optimization of Condition for Soluble Expression of Fusarium-specific scFv Antibody in Escherichia coli

    Institute of Scientific and Technical Information of China (English)

    胡祖权; 李和平; 吴平; 廖玉才; 张静柏

    2015-01-01

    The objectives of the work is to optimize the conditions for inducing expression, and obtain the soluble and high-yield expression of a Fusarium-specific single-chain variable fragment(scFv)antibody in the periplasmic space of Escherichia coli XL1-Blue. The recombinant plasmid containing a Fusarium-specific scFv antibody FvSG7 was transferred into E. coli XL1-Blue. After the culture medium for inducing selected, the soluble expression level and activity of FvSG7 antibody were analyzed by Western blot and ELISA detection for studying the influence of temperature, IPTG concentration and induction time on expression level. The maximum productivity of soluble FvSG7 antibody was obtained after induction at 25℃for 2 h, with a final concentration of 0.1 mmol/L β-D-thiogalactopyranoside(IPTG)and the cultured bacteria growing to the OD600 value of 0.5. In conclusion, the soluble expression of FvSG7 antibody in the periplasm of E. coli XL1-Blue increased significantly by optimizing the expression’s conditions of induction temperature, IPTG concentration and induction time.%通过优化诱导表达条件,实现抗镰刀菌单链抗体在大肠杆菌周质中高效可溶性表达。将抗镰刀菌单链抗体FvSG7转化到大肠杆菌XL1-Blue中,确定诱导表达培养基,诱导温度、诱导剂IPTG的浓度和诱导时间条件下培养重组大肠杆菌,通过Western杂交和ELISA检测分析单链抗体的可溶性表达情况以及抗体的活性。重组大肠杆菌培养至OD600nm为0.5时加入终浓度为0.1 mmol/L IPTG,25℃诱导表达2 h可获得最大量的可溶性单链抗体。通过对诱导温度、IPTG浓度和诱导时间等表达条件的优化,可以显著提高FvSG7抗体在大肠杆菌XL1-Blue周质中的表达量。

  13. Solubility measurement of trivalent lanthanide for performance assessment

    Energy Technology Data Exchange (ETDEWEB)

    Shibutani, Sanae [Power Reactor and Nuclear Fuel Development Corp., Tokai, Ibaraki (Japan). Tokai Works

    1996-03-01

    The solubility is estimated using thermodynamic data for performance assessment of the geological disposal system for high level radioactive waste. To calculate reliable solubility, the development of thermodynamic database is needed. We obtained the hydrolysis constants of Sm(OH){sub 3}(cr), SmOHCO{sub 3}(cr) and NdOHCO{sub 3}(cr) by solubility measurements. The solubility measurements of Sm(OH){sub 3}(cr) were conducted under low CO{sub 2} concentration system(Ar>99.999%), 24-27degC, ionic strength I=0.1, pH7-12.1. For hydroxo-carbonates were conducted in air, 25 {+-} 0.5degC, ionic strength I=0.1, pH5.7-9.7. The solubilities were similar to those of americium. The results were Sm(OH){sub 3}(cr) {r_reversible} Sm{sup 3+} + 3H{sub 2}O - 3H{sup +}; logK = 66.4, SmOHCO{sub 3}(cr) {r_reversible} Sm{sup 3+} + H{sub 2}O - H{sup +} + CO{sub 3}{sup 2-}; logK = -8.69, NdOHCO{sub 3}(cr) {r_reversible} Nd{sup 3+} + H{sub 2}O - H{sup +} + CO{sub 3}{sup 2-}; logK = -7.89. The solubilities of samarium and neodymium under the geological disposal condition were estimated at 10{sup -6}-10{sup -8} mol/l. (author).

  14. Effective single chain antibody (scFv) concentrations in vivo via adenoviral vector mediated expression of secretory scFv

    NARCIS (Netherlands)

    Arafat, WO; Gomez-Navarro, J; Buchsbaum, DJ; Xiang, J; Casado, E; Barker, SD; Mahasreshti, PJ; Haisma, HJ; Barnes, MN; Siegal, GP; Alvarez, RD; Hemminki, A; Nettelbeck, DM; Curiel, DT

    2002-01-01

    Single chain antibodies (scFv) represent powerful interventional agents for the achievement of targeted therapeutics. The practical utility of these agents have been limited, however, by difficulties related to production of recombinant scFv and the achievement of effective and sustained levels of s

  15. Cloning of scFv from hybridomas using a rational strategy: Application as a receptor to sensitive detection microcystin-LR in water.

    Science.gov (United States)

    Zhang, Xiuyuan; He, Kuo; Zhao, Ruiping; Wang, Lixia; Jin, Yandan

    2016-10-01

    Single chain variable fragment (scFv), containing of heavy and light chains (VH and VL) joined by a short peptide linker, has been used widely for immunodetection. Nevertheless, cloning functional variable genes is still a bottle neck for the scFv generation technology. Here, a rational strategy for cloning and selecting variable region genes from an anti-microcystin-LR hybridoma was devised, then the functional VH and VL genes were recloned and assembled to scFv using splicing overlap extension PCR. The resulting scFv gene was recombinantly expressed as a soluble scFv-alkaline phosphatase fusion protein (scFv-AP) by vector PLIP6/GN. Then an indirect competitive chemiluminescent enzyme immunoassay (ic-CLEIA) for detection of microcystin-LR was developed. The half-maximum inhibition concentrations (IC50) and limits of detection (LODs, IC15) were 0.81 ± 0.04 μgL(-1) and 0.13 ± 0.03 μgL(-1), respectively. With the mean coefficient of variation lowing 8%, the mean recovery in intra-assay and inter-assay were 100.06% and 96.46%, The proposed strategy should be useful for generation scFv in a rapid and simple way.

  16. Baculovirus display of single chain antibody (scFv using a novel signal peptide

    Directory of Open Access Journals (Sweden)

    Gonzalez Gaëlle

    2010-11-01

    Full Text Available Abstract Background Cells permissive to virus can become refractory to viral replication upon intracellular expression of single chain fragment variable (scFv antibodies directed towards viral structural or regulatory proteins, or virus-coded enzymes. For example, an intrabody derived from MH-SVM33, a monoclonal antibody against a conserved C-terminal epitope of the HIV-1 matrix protein (MAp17, was found to exert an inhibitory effect on HIV-1 replication. Results Two versions of MH-SVM33-derived scFv were constructed in recombinant baculoviruses (BVs and expressed in BV-infected Sf9 cells, N-myristoylation-competent scFvG2/p17 and N-myristoylation-incompetent scFvE2/p17 protein, both carrying a C-terminal HA tag. ScFvG2/p17 expression resulted in an insoluble, membrane-associated protein, whereas scFvE2/p17 was recovered in both soluble and membrane-incorporated forms. When coexpressed with the HIV-1 Pr55Gag precursor, scFvG2/p17 and scFvE2/p17 did not show any detectable negative effect on virus-like particle (VLP assembly and egress, and both failed to be encapsidated in VLP. However, soluble scFvE2/p17 isolated from Sf9 cell lysates was capable of binding to its specific antigen, in the form of a synthetic p17 peptide or as Gag polyprotein-embedded epitope. Significant amounts of scFvE2/p17 were released in the extracellular medium of BV-infected cells in high-molecular weight, pelletable form. This particulate form corresponded to BV particles displaying scFvE2/p17 molecules, inserted into the BV envelope via the scFv N-terminal region. The BV-displayed scFvE2/p17 molecules were found to be immunologically functional, as they reacted with the C-terminal epitope of MAp17. Fusion of the N-terminal 18 amino acid residues from the scFvE2/p17 sequence (N18E2 to another scFv recognizing CD147 (scFv-M6-1B9 conferred the property of BV-display to the resulting chimeric scFv-N18E2/M6. Conclusion Expression of scFvE2/p17 in insect cells using a BV

  17. Expression, production, and renaturation of a functional single-chain variable antibody fragment (scFv against human ICAM-1

    Directory of Open Access Journals (Sweden)

    H. Sun

    2014-07-01

    Full Text Available Intercellular adhesion molecule-1 (ICAM-1 is an important factor in the progression of inflammatory responses in vivo. To develop a new anti-inflammatory drug to block the biological activity of ICAM-1, we produced a monoclonal antibody (Ka=4.19×10−8 M against human ICAM-1. The anti-ICAM-1 single-chain variable antibody fragment (scFv was expressed at a high level as inclusion bodies in Escherichia coli. We refolded the scFv (Ka=2.35×10−7 M by ion-exchange chromatography, dialysis, and dilution. The results showed that column chromatography refolding by high-performance Q Sepharose had remarkable advantages over conventional dilution and dialysis methods. Furthermore, the anti-ICAM-1 scFv yield of about 60 mg/L was higher with this method. The purity of the final product was greater than 90%, as shown by denaturing gel electrophoresis. Enzyme-linked immunosorbent assay, cell culture, and animal experiments were used to assess the immunological properties and biological activities of the renatured scFv.

  18. Construction of multiform scFv antibodies using linker peptide

    Institute of Scientific and Technical Information of China (English)

    Shihua Wang; Cengjie Zheng; Ying Liu; Huirong Zheng; Zonghua Wang

    2008-01-01

    Multiform single chain variable fragments (acFvs) including different length linker scFvs and bispecific seFv were constructed. The linker lengths of 0, 3, 5, 8, 12, and 15 amino acids between VH and VL of antideoxynivalenol (anti-DON) scFv were used to analyze the affinities of scFvs. The affinity constants of these scFvs increased when the linker was lower than 12 amino acids. The affinity constant would not change when the linker was longer than 12 amino acids. Fusion gene of anti-DON seFv and antizearalenone (anti-ZEN) scFv was also constructed through eormection by a short peptide tinker DNA to express a bispecific scFv. The affinity constants assay showed that the two scFvs of fusion bispecific scFv remained their own affinity compared to their parental scFvs. Competitive direct enzyme linked immunosorbent assay was used to detect DON and ZEN in contaminated wheat (Triticum aestivum L.) samples, and the results indicated that this bispecifie acFv was applicable in DON and ZEN detection. This work confirmed that bispecific scFv could be successfully obtained, and might also have an application in diagnosing fungal infection, and breeding transgertic plants.

  19. Optimisation of production of a domoic acid-binding scFv antibody fragment in Escherichia coli using molecular chaperones and functional immobilisation on a mesoporous silicate support.

    Science.gov (United States)

    Hu, Xuejun; O'Hara, Liam; White, Simon; Magner, Edmond; Kane, Marian; Wall, J Gerard

    2007-03-01

    Domoic acid is a potent neurotoxin that can lead to amnesic shellfish poisoning in humans through ingestion of contaminated shellfish. We have produced and purified an anti-domoic acid single-chain Fragment variable (scFv) antibody fragment from the Escherichia coli periplasm. Yields of functional protein were increased by up to 100-fold upon co-production of E. coli DnaKJE molecular chaperones but co-overproduction of GroESL led to a reduction in solubility of the scFv. Co-production of the peptidyl-prolyl isomerase trigger factor resulted in accumulation of unprocessed scFv in the E. coli cytoplasm. This was due to an apparent bottleneck in translocation of the cytoplasmic membrane by the recombinant polypeptide. Co-expression of the E. coli disulfide bond isomerase dsbC increased scFv yields by delaying lysis of the host bacterial cells though this effect was not synergistic with molecular chaperone co-production. Meanwhile, use of a cold-shock promoter for protein production led to accumulation of greater amounts of scFv polypeptide which was predominantly in insoluble form and could not be rescued by chaperones. Purification of the scFv was achieved using an optimised metal affinity chromatography procedure and the purified protein bound domoic acid when immobilised on a mesoporous silicate support. The work outlines the potential benefit of applying a molecular chaperone/folding catalyst screening approach to improve antibody fragment production for applications such as sensor development.

  20. Construction of a human functional single-chain variable fragment (scFv) antibody recognizing the malaria parasite Plasmodium falciparum.

    Science.gov (United States)

    Wajanarogana, Sumet; Prasomrothanakul, Teerawat; Udomsangpetch, Rachanee; Tungpradabkul, Sumalee

    2006-04-01

    Falciparum malaria is one of the most deadly and profound human health problems around the tropical world. Antimalarial drugs are now considered to be a powerful treatment; however, there are drugs currently being used that are resistant to Plasmodium falciparum parasites spreading in different parts of the world. Although the protective immune response against intraerythrocytic stages of the falciparum malaria parasite is still not fully understood, immune antibodies have been shown to be associated with reduced parasite prevalence. Therefore antibodies of the right specificity present in adequate concentrations and affinity are reasonably effective in providing protection. In the present study, VH (variable domain of heavy chain) and VL (variable domain of light chain) were isolated from human blood lymphocytes of P. falciparum in one person who had high serum titre to RESA (ring-infected erythrocyte surface antigen). Equal amounts of VH and VL were assembled together with universal linker (G4S)3 to generate scFvs (single-chain variable fragments). The scFv antibodies were expressed with a phage system for the selection process. Exclusively, an expressed scFv against asynchronous culture of P. falciparum-infected erythrocytes was selected and characterized. Sequence analysis of selected scFv revealed that this clone could be classified into a VH family-derived germline gene (VH1) and Vkappa family segment (Vkappa1). Using an indirect immunofluorescence assay, we could show that soluble expressed scFv reacted with falciparum-infected erythrocytes. The results encourage the further study of scFvs for development as a potential immunotherapeutic agent.

  1. Development of single-chain variable fragments (scFv) against influenza virus targeting hemagglutinin subunit 2 (HA2).

    Science.gov (United States)

    Li, Tai-Wei; Cheng, Shu-Fang; Tseng, Yen-Tzu; Yang, Yu-Chih; Liu, Wen-Chun; Wang, Sheng-Cyuan; Chou, Mei-Ju; Lin, Yu-Jen; Wang, Yueh; Hsiao, Pei-Wen; Wu, Suh-Chin; Chang, Ding-Kwo

    2016-01-01

    Influenza A viruses (IAV) are widespread in birds and domestic poultry, occasionally causing severe epidemics in humans and posing health threats. Hence, the need to develop a strategy for prophylaxis or therapy, such as a broadly neutralizing antibody against IAV, is urgent. In this study, single-chain variable fragment (scFv) phage display technology was used to select scFv fragments recognizing influenza envelope proteins. The Tomlinson I and J scFv phage display libraries were screened against the recombinant HA2 protein (rHA2) for three rounds. Only the third-round elution sample of the Tomlinson J library showed high binding affinity to rHA2, from which three clones (3JA18, 3JA62, and 3JA78) were chosen for preparative-scale production as soluble antibody by E. coli. The clone 3JA18 was selected for further tests due to its broad affinity for influenza H1N1, H3N2 and H5N1. Simulations of the scFv 3JA18-HA trimer complex revealed that the complementarity-determining region of the variable heavy chain (VH-CDR2) bound the stem region of HA. Neutralization assays using a peptide derived from VH-CDR2 also supported the simulation model. Both the selected antibody and its derived peptide were shown to suppress infection with H5N1 and H1N1 viruses, but not H3N2 viruses. The results also suggested that the scFvs selected from rHA2 could have neutralizing activity by interfering with the function of the HA stem region during virus entry into target cells.

  2. A New Simulated Plasma for Assessing the Solubility of Mineral Trioxide Aggregate

    Science.gov (United States)

    Samiei, Mohammad; Shahi, Shahriar; Aslaminabadi, Naser; Valizadeh, Hadi; Aghazadeh, Zahra; Pakdel, Seyyed Mahdi Vahid

    2015-01-01

    Introduction: Solubility of mineral trioxide aggregate (MTA) is an important characteristic that affects other properties such as microleakage and biocompatibility. Distilled water (DW) has previously been used for solubility tests. This experimental study compared the solubility of MTA in DW, synthetic tissue fluid (STF) and new simulated plasma (SP). Methods and Materials: In this study, 36 samples of tooth-colored ProRoot MTA were prepared and divided into three groups (n=12) to be immersed in three different solutions (DW, STF, and SP). Solubility tests were conducted at 2, 5, 9, 14, 21, 30, 50, and 78-day intervals. The unequal variance F-test (Welch test) was utilized to determine the effect of solubility media and Games-Howell analysis was used for pairwise comparisons. The repeated-measures ANOVA was used to assess the importance of immersion duration. Results: Welch test showed significant differences in solubility rates of samples between all the different solubility media at all the study intervals (P<0.05) except for the 14-day interval (P=0.094). The mixed repeated-measures ANOVA revealed a significant difference in solubility rate of MTA in three different solutions at all time-intervals (P=0.000). Games-Howell post-hoc test revealed that all pairwise comparisons were statistically significant at all time-intervals (P=0.000). Conclusion: Based on the findings of this study, the long-term solubility of MTA in simulated plasma was less than that in synthetic tissue fluid and distilled water. PMID:25598806

  3. Thermodynamic assessment of solubility and activity of iron, chromium, and nickel in lead bismuth eutectic

    Science.gov (United States)

    Gossé, Stéphane

    2014-06-01

    Lead-Bismuth Eutectic (LBE) is a heavy liquid alloy used as a coolant for the Lead-Cooled Fast Reactors and spallation target for Accelerator Driven Systems. LBE is also considered in sodium fast reactor designs as coolant in secondary circuit to avoid any occurrence of the reaction between sodium and water in steam generators. Even if this coolant presents many advantages due to its thermophysical properties, corrosion towards structural materials remains one of the major issues of LBE. Because corrosion in LBE is partly driven by dissolution processes, the solubility and chemical activity of the main elements of the alloy are the key parameters to model the related corrosion processes. Using the Calphad method and the Thermo-Calc software, a thermodynamic database was developed to assess the interaction between Cr-Ni-Fe alloys and LBE. The current thermodynamic data on the Cr-Fe-Ni + Bi-Pb quinary system was reviewed and the Bi-Cr and Cr-Pb binary phase diagrams were assessed. Fe, Cr and Ni solubilities (in at. fraction, T in K) at LBE composition were calculated: Fe solubility at LBE composition: log10 (SFe)=0.5719-4398.6T (399-1173 K) Cr solubility at LBE composition: log10 (SCr)=-0.2757-3056.1T (399-1173 K) Ni solubility at LBE composition: log10 (SNi)=2.8717-2932.9T (528-742 K) log10 (SNi)=0.2871-1006.3T (742-1173 K) Then, the thermodynamic assessment performed in this study was used to predict more accurately the Fe, Cr and Ni activities and solubilities in the case of four austenitic model alloys also studied in the framework of corrosion tests [1]. The calculated activities and solubilities provide thermodynamic data to better understand dissolution or precipitation phenomena observed during LBE corrosion processes.

  4. WATER ACTIVITY DATA ASSESSMENT TO BE USED IN HANFORD WASTE SOLUBILITY CALCULATIONS

    Energy Technology Data Exchange (ETDEWEB)

    DISSELKAMP RS

    2011-01-06

    The purpose of this report is to present and assess water activity versus ionic strength for six solutes:sodium nitrate, sodium nitrite, sodium chloride, sodium carbonate, sodium sulfate, and potassium nitrate. Water activity is given versus molality (e.g., ionic strength) and temperature. Water activity is used to estimate Hanford crystal hydrate solubility present in the waste.

  5. Expression of anti-tumor necrosis factor alpha (TNFα) single-chain variable fragment (scFv) in Spirodela punctata plants transformed with Agrobacterium tumefaciens.

    Science.gov (United States)

    Balaji, Parthasarathy; Satheeshkumar, P K; Venkataraman, Krishnan; Vijayalakshmi, M A

    2016-05-01

    Therapeutic antibodies against tumor necrosis factor alpha (TNFα) have been considered effective for some of the autoimmune diseases such as rheumatoid arthritis, Crohn's diseases, and so on. But associated limitations of the current therapeutics in terms of cost, availability, and immunogenicity have necessitated the need for alternative candidates. Single-chain variable fragment (scFv) can negate the limitations tagged with the anti-TNFα therapeutics to a greater extent. In the present study, Spirodela punctata plants were transformed with anti-TNFα through in planta transformation using Agrobacterium tumefaciens strain, EHA105. Instead of cefotaxime, garlic extract (1 mg/mL) was used to remove the agrobacterial cells after cocultivation. To the best of our knowledge, this report shows for the first time the application of plant extracts in transgenic plant development. 95% of the plants survived screening under hygromycin. ScFv cDNA integration in the plant genomic DNA was confirmed at the molecular level by PCR. The transgenic protein expression was followed up to 10 months. Expression of scFv was confirmed by immunodot blot. Protein expression levels of up to 6.3% of total soluble protein were observed. β-Glucuronidase and green fluorescent protein expressions were also detected in the antibiotic resistant plants. The paper shows the generation of transgenic Spirodela punctuata plants through in planta transformation.

  6. Cloning and expression in Escherichia coli of a human gelatinase B-inhibitory single-chain immunoglobulin variable fragment (scFv).

    Science.gov (United States)

    Zhou, N; Paemen, L; Opdenakker, G; Froyen, G

    1997-09-15

    The murine monoclonal antibody REGA-3G12 selectively and specifically inhibits the activity of human gelatinase B. The cDNA fragments which encode the variable regions of the light and heavy chains were isolated by PCR-mediated cloning and sequenced. Single-chain Fv expression constructs for Escherichia coli were generated in which c-myc tag sequences were encoded. Inducible expression of the scFv and secretion to the periplasm were obtained with higher yields when the c-myc tag sequence was positioned at the amino-terminal side. The inhibitory activity of purified scFv on neutrophil gelatinase B was tested in a gelatin degradation assay and it was found to possess a similar specific activity as that of the intact monoclonal antibody and of the pepsin-clipped F(ab')2 derivative. This shows for the first time that inhibition of soluble enzymes with scFv is possible and opens new perspectives for the treatment of diseases with excessive and detrimental enzyme production in the host.

  7. Update of a thermodynamic database for radionuclides to assist solubility limits calculation for performance assessment

    Energy Technology Data Exchange (ETDEWEB)

    Duro, L.; Grive, M.; Cera, E.; Domenech, C.; Bruno, J. (Enviros Spain S.L., Barcelona (ES))

    2006-12-15

    This report presents and documents the thermodynamic database used in the assessment of the radionuclide solubility limits within the SR-Can Exercise. It is a supporting report to the solubility assessment. Thermodynamic data are reviewed for 20 radioelements from Groups A and B, lanthanides and actinides. The development of this database is partially based on the one prepared by PSI and NAGRA. Several changes, updates and checks for internal consistency and completeness to the reference NAGRA-PSI 01/01 database have been conducted when needed. These modifications are mainly related to the information from the various experimental programmes and scientific literature available until the end of 2003. Some of the discussions also refer to a previous database selection conducted by Enviros Spain on behalf of ANDRA, where the reader can find additional information. When possible, in order to optimize the robustness of the database, the description of the solubility of the different radionuclides calculated by using the reported thermodynamic database is tested in front of experimental data available in the open scientific literature. When necessary, different procedures to estimate gaps in the database have been followed, especially accounting for temperature corrections. All the methodologies followed are discussed in the main text

  8. Synergistic capture of Clostridium botulinum Type A neurotoxin by scFv antibodies to novel epitopes

    Energy Technology Data Exchange (ETDEWEB)

    Gray, Sean A.; Barr, John R.; Kalb, Suzanne R.; Marks, James D.; Baird, Cheryl L.; Cangelosi, Gerard A.; Miller, Keith D.; Feldhaus, Michael J.

    2011-10-01

    A non-immune library of human single chain fragment variable (scFv) antibodies displayed on Saccharomyces cerevisiae was screened for binding to the Clostridium botulinum neurotoxin serotype A binding domain [BoNT/A (Hc)] with the goal of identifying scFv to novel epitopes. To do this, an antibody-mediated labeling strategy was used in which antigen-binding yeast clones were selected after labeling with previously characterized monoclonal antibodies (MAbs) specific to the Hc. Twenty unique scFv clones were isolated that bound Hc. Of these, three also bound to full-length BoNT/A toxin complex with affinities ranging from 5 nM to 170 nM. Epitope binning showed that the three unique clones recognized at least two epitopes that were distinct from one another and from the detection MAbs. After production in E. coli, the scFv were coupled to magnetic particles and tested for their ability to capture BoNT/A holotoxin using an Endopep-MS assay. In this assay, toxin captured by scFv coated magnetic particles was detected by incubation of the complex with a peptide containing a BoNT/A-specific cleavage sequence. Mass spectrometry was used to detect the ratio of intact peptide to cleavage products as evidence for toxin capture. When tested individually, each of the scFv showed a weak positive Endopep-MS result. However, when the particles were coated with all three scFv simultaneously, they exhibited significantly higher Endopep-MS activity, consistent with synergistic binding. These results demonstrate novel approaches toward the isolation and characterization of scFv antibodies specific to unlabeled antigen. They also provide evidence that distinct scFv antibodies can work synergistically to increase the efficiency of antigen capture onto a solid support.

  9. The modeler's influence on calculated solubilities for performance assessments at the Aspo Hard-rock Laboratory

    Science.gov (United States)

    Ernren, A.T.; Arthur, R.; Glynn, P.D.; McMurry, J.

    1999-01-01

    Four researchers were asked to provide independent modeled estimates of the solubility of a radionuclide solid phase, specifically Pu(OH)4, under five specified sets of conditions. The objectives of the study were to assess the variability in the results obtained and to determine the primary causes for this variability.In the exercise, modelers were supplied with the composition, pH and redox properties of the water and with a description of the mineralogy of the surrounding fracture system A standard thermodynamic data base was provided to all modelers. Each modeler was encouraged to use other data bases in addition to the standard data base and to try different approaches to solving the problem.In all, about fifty approaches were used, some of which included a large number of solubility calculations. For each of the five test cases, the calculated solubilities from different approaches covered several orders of magnitude. The variability resulting from the use of different thermodynamic data bases was in most cases, far smaller than that resulting from the use of different approaches to solving the problem.

  10. Production of monoclonal anti-GP Ⅱ b/Ⅲa scFv antibodies from scFv phage libraries%从scFv噬菌体抗体库中筛选抗GPⅡ b/Ⅲa单链抗体

    Institute of Scientific and Technical Information of China (English)

    夏红利; 谭最; 陈德杰; 乔建国; 邱仁峰

    2011-01-01

    目的 从scFv噬菌体库中获取人源化特异性Anti-GPⅡb/Ⅲa单克隆scFv抗体.方法 对Tomlinson I+J scFv文库进行3次淘洗,富集特异性的抗GPⅡb/Ⅲa抗体.通过酶联免疫吸附试验(ELISA)和双脱氧终止法基因测序及同源性对比,检测出人源化的抗GPⅡb/Ⅲa单克隆抗体.结果 在3次淘洗后,得到了抗GPⅡb/Ⅲa单克隆噬菌体抗体,阳性克隆的获取率在95.6%以上;ELISA和基因测序筛选出25种不同的全长抗GPⅡb/Ⅲa噬菌体抗体,这些基因序列与人免疫球蛋白可变区基因同源性达到89%以上;分泌性抗体ELISA检测提示这些抗体顺利表达了蛋白并特异性结合GPⅡb/Ⅲa,其中15种scFv对GPⅡb/Ⅲa有更强的阳性反应.结论 人源化的特异性抗-GPⅡb/Ⅲa scFv能通过噬菌体展示技术快速有效地获得.%Objective To screen monoclonal anti-GP Ⅱ b/Ⅲ a antibodies from scFv phage libraries and obtain specific monoclonal anti-GP Ⅱ b/Ⅲ a scFv. Methods Specific anti-GP Ⅱ b/Ⅲ a scFv antibodies were enriched by three rounds of selection from Tomlinson Ⅰ + J libraries. By using polyclonal and monoclonal phage enzyme linked immunosorbent assay ( ELISA) and gene sequencing by bideoxy chain termination, full-length specific monoclonal anti-GP Ⅱ b/Ⅲ a antibodies were picked out and their gene sequences were obtained. Results Twenty-five different full-length monoclonal scFv phage fragments were obtained after three rounds of panning and their gene sequences were identified, and positive rate of monoclones was above 95.6%; homology comparison with variable regions of human immunoglobulin gene showed the similarity was above 89%; the result of soluble scFv ELISA showed that these specific scFv could be expressed smoothly, and 15 full-length monoclonal scFv antibodies were stronger positive than the other in these scFv. Conclusion Antibody phage display was a rapid and effective method to obtain Anti-GP Ⅱ b/Ⅲ a scFv fragements.

  11. Chemical Chaperones Increasing Expression Level of Soluble Single-chain Fv Antibody(scFv2F3)

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Glutathione peroxidase (GPX) is a selenoenzyme that protects the biomembrane and other cellular components against oxidative damage. The selenium-containing single chain Fv fragment of monoclonal antibody 2F3 (SescFv2F3 ) is a kind of GPX mimic and it has a wide clinical applications because of its high activity and low antigenicity. Se-scFv2F3 is generated by the chemical modification of the single chain Fy fragment of monoclonal antibody 2F3 ( scFv2F3 ), which can be expressed in E. coli. In this article, the effect of chemical chaperones, such as glycerol, glucose, and β-cyclodextrin added to the culture medium, on the expression of soluble scFv2F3 was investigated. The expression level was evaluated by the determination of soluble scFv2F3 contents in the whole cell lysates.The results suggest that both glycerol and β-cyclodextrin greatly increase the expression level of soluble scFv2F3, and β-cyclodextrin is found to be more effective compared with glycerol. Glucose has a slight effect on the expression level of soluble scFv2F3. This is the first example, wherein β-cyclodextrin has been used as a chemical chaperone during the cell culture to improve the expression level of recombinant proteins. In addition, chemical chaperones are found to decrease the toxic effect of IPTG on cells.

  12. Affinity Purification of Tumor Necrosis Factor-α Expressed in Raji Cells by Produced scFv Antibody Coupled CNBr-Activated Sepharose

    Directory of Open Access Journals (Sweden)

    Safar Farajnia

    2013-02-01

    Full Text Available Purpose: Recombinant tumor necrosis factor-alpha (TNF-α has been utilized as an antineoplastic agent for the treatment of patients with melanoma and sarcoma. It targets tumor cell antigens by impressing tumor-associated vessels. Protein purification with affinity chromatography has been widely used in the downstream processing of pharmaceutical-grade proteins. Methods: In this study, we examined the potential of our produced anti-TNF-scFv fragments for purification of TNF-α produced by Raji cells. he Raji cells were induced by lipopolysaccharides (LPS to express TNF-α. Western blotting and Fluorescence-activated cell sorting (FACS flow cytometry analyses were used to evaluate the TNF-α expression. The anti-TNF-α scFv selected from antibody phage display library was coupled to CNBr-activated sepharose 4B beads used for affinity purification of expressed TNF-α and the purity of the protein was assessed by SDS-PAGE. Results: Western blot and FACS flow cytometry analyses showed the successful expression of TNF-α with Raji cells. SDS-PAGE analysis showed the performance of scFv for purification of TNF-α protein with purity over 95%. Conclusion: These findings confirm not only the potential of the produced scFv antibody fragments but also this highly pure recombinant TNF-α protein can be applied for various in vitro and in vivo applications.

  13. Construction of an anti-IL-1β scfv and TNFRI fusion protein and its therapeutic effect on RA mice model.

    Science.gov (United States)

    Kan, Fangming; Ren, Guiping; Guo, Mo; Qi, Jianying; Zhang, Yu; Han, Yang; Zhang, Yakun; Li, Deshan

    2014-01-01

    IL-1β and TNF-α play key roles in the inflammatory response. Their abnormal expression may cause the occurrence of various diseases, such as RA. Recently, medicines of target TNF-α and IL-1β have become popular in the clinical practice. Although these biological agents can get mostly good results, they are not effective in all patients. The reason for this result may be that these biological agents could not fully inhibit a variety of inflammatory cytokines in the inflammatory response. In the present study, a fusion protein gene which encoded human interleukin-1β scfv and soluble TNF receptor I (sTNFRI) was cloned. A number of in vitro assays demonstrated that anti-IL-1β scfv/TNFRI simultaneously bound to both targets. The bioactivity assay showed that the fusion protein could inhibit both the cytotoxicity of hTNF-α on L929 cells and hIL-1β-induced proliferation of L929 cells, indicating that the fusion protein has the ability to neutralize both hTNF-α and hIL-1β. In this study, we established the chicken type II collagen-induced rheumatoid arthritis model in Kunming mice, and evaluated the pharmacological effect of the fusion protein in vivo. Model mice were randomly divided into 8 groups (n=8): CIA model control group, DEX treatment group (1 mg/kg), intraperitoneal treatment group (highdose: 5 mg/kg; medium-dose: 2 mg/kg; low-dose: 0.8 mg/kg), subcutaneous treatment group (high-dose: 5 mg/kg; medium- dose: 2 mg/kg; low-dose: 0.8 mg/kg), and healthy mice as control. The control group received the same volume of saline. The mice were administrated once every 2 days. Arthritis index, anti-CII antibody titers, cytokine levels, histopathological changes were examined. The results showed that anti-IL-1β scfv/TNFRI fusion protein could reduce the degree of joint swelling, inflammatory cell infiltration, synovial cell proliferation and the level of CII antibody in the sera. The Real-time PCR analysis showed that anti-IL-1β scfv/TNFRI had the ability to

  14. Fast conversion of scFv to Fab antibodies using type IIs restriction enzymes.

    Science.gov (United States)

    Sanmark, Hanna; Huovinen, Tuomas; Matikka, Tero; Pettersson, Tiina; Lahti, Maria; Lamminmäki, Urpo

    2015-11-01

    Single chain variable fragment (scFv) antibody libraries are widely used for developing novel bioaffinity reagents, although Fab or IgG molecules are the preferred antibody formats in many final applications. Therefore, rapid conversion methods for combining multiple DNA fragments are needed to attach constant domains to the scFv derived variable domains. In this study we describe a fast and easy cloning method for the conversion of single framework scFv fragments to Fab fragments using type IIS restriction enzymes. All cloning steps excluding plating of the Fab transformants can be done in 96 well plates and the procedure can be completed in one working day. The concept was tested by converting 69 scFv clones into Fab format on 96 well plates, which resulted in 93% success rate. The method is particularly useful as a high-throughput tool for the conversion of the chosen scFv clones into Fab molecules in order to analyze them as early as possible, as the conversion can significantly affect the binding properties of the chosen clones.

  15. Construction of Human ScFv Phage Display Library against Ovarian Tumor

    Institute of Scientific and Technical Information of China (English)

    XIA Jinsong; BI Hao; YAO Qin; QU Shen; ZONG Yiqiang

    2006-01-01

    In order to construct a single chain fragment variable (ScFv) phage display library against ovarian tumor, by using RT-PCR, the human heavy chain variable region genes (VH) and light chain variable region genes (VL) were amplified from lymphocytes of ovarian tumor patients and subsequently assembled into ScFv genes by SOE. The resulting ScFv genes were electrotransformed into E.coli TG1 and amplified with the co-infection of helper phage M13KO7 to obtain phage display library. The capacity and titer of the resulting library were detected. The phage antibody library with a capacity of approximately 3 × 109 cfu/μg was obtained. After amplification with helper phage, the titer of antibody library reached 5 × 1012 cfu/mL. Human ScFv library against ovarian tumor was constructed successfully, which laid a foundation for the screening of ovarian tumor specific ScFv for the radioimmunoimaging diagnosis of ovarian tumor.

  16. Alternate source term models for Yucca Mountain performance assessment based on natural analog data and secondary mineral solubility

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, W.M.; Codell, R.B.

    1999-07-01

    Performance assessment calculations for the proposed high level radioactive waste repository at Yucca Mountain, Nevada, were conducted using the Nuclear Regulatory Commission Total-System Performance Assessment (TPA 3.2) code to test conceptual models and parameter values for the source term based on data from the Pena Blanca, Mexico, natural analog site and based on a model for coprecipitation and solubility of secondary schoepite. In previous studies the value for the maximum constant oxidative alteration rate of uraninite at the Nopal I uranium body at Pena Blanca was estimated. Scaling this rate to the mass of uranium for the proposed Yucca Mountain repository yields an oxidative alteration rate of 22 kg/y, which was assumed to be an upper limit on the release rate from the proposed repository. A second model was developed assuming releases of radionuclides are based on the solubility of secondary schoepite as a function of temperature and solution chemistry. Releases of uranium are given by the product of uranium concentrations at equilibrium with schoepite and the flow of water through the waste packages. For both models, radionuclides other than uranium and those in the cladding and gap fraction were modeled to be released at a rate proportional to the uranium release rate, with additional elemental solubility limits applied. Performance assessment results using the Pena Blanca oxidation rate and schoepite solubility models for Yucca Mountain were compared to the TPA 3.2 base case model, in which release was based on laboratory studies of spent fuel dissolution, cladding and gap release, and solubility limits. Doses calculated using the release rate based on natural analog data and the schoepite solubility models were smaller than doses generated using the base case model. These results provide a degree of confidence in safety predictions using the base case model and an indication of how conservatism in the base case model may be reduced in future analyses.

  17. Macrophage activity assessed by soluble CD163 in early rheumatoid arthritis

    DEFF Research Database (Denmark)

    Greisen, Stinne Ravn; Møller, Holger Jon; Stengaard-Pedersen, Kristian;

    2015-01-01

    OBJECTIVES: Rheumatoid arthritis (RA) is a chronic autoimmune disease where TNF-α is a central mediator of inflammation, and is cleaved from the cell surface by TACE/ADAM17. This metalloproteinase is also responsible for the release of soluble (s) CD163. Soluble CD163 reflects macrophage activation...

  18. High efficiency recovery and epitope specific sorting of an scFv yeast display library

    Energy Technology Data Exchange (ETDEWEB)

    Siegel, Robert W.; Coleman, James R.; Miller, Keith D.; Feldhaus, Michael

    2004-03-01

    In order to more productively utilize the rich source of antigen specific reagents present in the previously described non-immune scFv yeast display library (Feldhaus et al., 2003) one must be able to efficiently isolate and characterize clones within the library. To this end, we have developed and validated a magnetic bead sorting technique utilizing the Miltenyi MacsTm system to recover greater than 90% of the antigen specific clones present in the library. In combination with flow cytometry, we rapidly reduced diversity and enriched for antigen specific clones in three rounds of selection. Furthermore, we demonstrate the use of pre-existing monoclonal antibodies (mAbs) for antigen labeling and subsequent flow cytometric sorting and characterization of epitope specific scFv. Combining these two improvements in library screening allowed isolation and characterization of 3 epitope specific scFv (including a previously uncharacterized epitope) to a 6 kd protein, epidermal growth factor EGF.

  19. Isolation and characterization of anti c-met single chain fragment variable (scFv) antibodies.

    Science.gov (United States)

    Qamsari, Elmira Safaie; Sharifzadeh, Zahra; Bagheri, Salman; Riazi-Rad, Farhad; Younesi, Vahid; Abolhassani, Mohsen; Ghaderi, Sepideh Safaei; Baradaran, Behzad; Somi, Mohammad Hossein; Yousefi, Mehdi

    2017-12-01

    The receptor tyrosine kinase (RTK) Met is the cell surface receptor for hepatocyte growth factor (HGF) involved in invasive growth programs during embryogenesis and tumorgenesis. There is compelling evidence suggesting important roles for c-Met in colorectal cancer proliferation, migration, invasion, angiogenesis, and survival. Hence, a molecular inhibitor of an extracellular domain of c-Met receptor that blocks c-Met-cell surface interactions could be of great thera-peutic importance. In an attempt to develop molecular inhibitors of c-Met, single chain variable fragment (scFv) phage display libraries Tomlinson I + J against a specific synthetic oligopeptide from the extracellular domain of c-Met receptor were screened; selected scFv were then characterized using various immune techniques. Three c-Met specific scFv (ES1, ES2, and ES3) were selected following five rounds of panning procedures. The scFv showed specific binding to c-Met receptor, and significantly inhibited proliferation responses of a human colorectal carcinoma cell line (HCT-116). Moreover, anti- apoptotic effects of selected scFv antibodies on the HCT-116 cell line were also evaluated using Annexin V/PI assays. The results demonstrated rates of apoptotic cell death of 46.0, 25.5, and 37.8% among these cells were induced by use of ES1, ES2, and ES3, respectively. The results demonstrated ability to successfully isolate/char-acterize specific c-Met scFv that could ultimately have a great therapeutic potential in immuno-therapies against (colorectal) cancers.

  20. Recombinant norovirus-specific scFv inhibit virus-like particle binding to cellular ligands

    Directory of Open Access Journals (Sweden)

    Hardy Michele E

    2008-01-01

    Full Text Available Abstract Background Noroviruses cause epidemic outbreaks of gastrointestinal illness in all age-groups. The rapid onset and ease of person-to-person transmission suggest that inhibitors of the initial steps of virus binding to susceptible cells have value in limiting spread and outbreak persistence. We previously generated a monoclonal antibody (mAb 54.6 that blocks binding of recombinant norovirus-like particles (VLP to Caco-2 intestinal cells and inhibits VLP-mediated hemagglutination. In this study, we engineered the antigen binding domains of mAb 54.6 into a single chain variable fragment (scFv and tested whether these scFv could function as cell binding inhibitors, similar to the parent mAb. Results The scFv54.6 construct was engineered to encode the light (VL and heavy (VH variable domains of mAb 54.6 separated by a flexible peptide linker, and this recombinant protein was expressed in Pichia pastoris. Purified scFv54.6 recognized native VLPs by immunoblot, inhibited VLP-mediated hemagglutination, and blocked VLP binding to H carbohydrate antigen expressed on the surface of a CHO cell line stably transfected to express α 1,2-fucosyltransferase. Conclusion scFv54.6 retained the functional properties of the parent mAb with respect to inhibiting norovirus particle interactions with cells. With further engineering into a form deliverable to the gut mucosa, norovirus neutralizing antibodies represent a prophylactic strategy that would be valuable in outbreak settings.

  1. Assessment of the solubility and bioaccessibility of arsenic in realgar wine using a simulated gastrointestinal system

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Yingnan; Sun Guoxin [Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085 (China); Williams, Paul N. [Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085 (China); Lancaster Environment Centre, Lancaster University, Lancaster, LA1 4YQ (United Kingdom); Huang Qing [Lancaster Environment Centre, Lancaster University, Lancaster, LA1 4YQ (United Kingdom); Zhu Yongguan, E-mail: ygzhu@rcees.ac.cn [Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085 (China); Key Lab of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361003 (China)

    2011-05-15

    Consumption of arsenic (As) wine is a traditional activity during the classic Chinese festival of Duanwu, colloquially known worldwide as the Dragon Boat Day. Arsenic wine is drunk on the morning of the fifth day of the fifth lunar calendar month to commemorate the death of Qu Yuan, a famed Chinese poet who drowned himself in protest of a corrupt government, and to protect against ill fortune. Although realgar minerals are characteristically composed of sparingly soluble tetra-arsenic tetra-sulfides (As{sub 4}S{sub 4}), purity does vary with up to 10% of As being present as non-sulfur bound species, such as arsenate (As{sup V}) and arsenite (As{sup III}). Despite, the renewed interest in As speciation and the bioaccessibility of the active As components in realgar based Chinese medicines, little is known about the safety surrounding the cultural practice of drinking As wine. In a series of experiments the speciation and solubility of As in a range of wines were investigated. Furthermore, a simulated gastrointestinal system was employed to predict the impact of digestive processes on As bioavailability. The predominant soluble As species found in all the wines were As{sup III} and As{sup V}. Based on typical As wine recipes employing 0.1 g realgar mL{sup -1} wine, the concentration of dissolved As ranged from ca. 100 to 400 mg L{sup -1} depending on the ethanol content of the preparation: with the As solubility found to be higher in wines with a lower proportion of ethanol. Based on a common 100 mL measure of wine with a concentration of 400 mg As L{sup -1}, the amount of soluble As would equate to around half of the acute minimal lethal dose for adults. This is likely an underestimate of the bioaccessible concentration, as a three-fold increase in bioaccessibility could be observed in the intestinal phase based on the results from the stimulated gastrointestinal system. - Research highlights: {yields} Drinking realgar wine is a traditional activity during the

  2. Assessment of absorption potential of poorly water-soluble drugs by using the dissolution/permeation system.

    Science.gov (United States)

    Kataoka, Makoto; Yano, Koji; Hamatsu, Yoriko; Masaoka, Yoshie; Sakuma, Shinji; Yamashita, Shinji

    2013-11-01

    This study aims to assess the absorption potential of oral absorption of poorly water-soluble drugs by using the dissolution/permeation system (D/P system). The D/P system can be used to perform analysis of drug permeation under dissolution process and can predict the fraction of absorbed dose in humans. When celecoxib at 1/100 of a clinical dose was applied to the D/P system, percentage of dose dissolved and permeated significantly decreased with an increase in the applied amount, resulting in the oral absorption being predicted to be 22-55%. Whereas similar dissolution and permeation profiles of montelukast sodium were observed, estimated absorption (69-85%) was slightly affected. Zafirlukast absorption (33-36%) was not significantly affected by the dose, although zafirlukast did not show complete dissolution. The relationship between clinical dose and predicted oral absorption of drugs corresponded well to clinical observations. The limiting step of the oral absorption of celecoxib and montelukast sodium was solubility, while that of zafirlukast was dissolution rate. However, due to high permeability of montelukast, oral absorption was not affected by dose. Therefore, the D/P system is a useful tool to assess the absorption potential of poorly water-soluble drugs for oral use.

  3. Assessment of the solubility and bioaccessibility of arsenic in realgar wine using a simulated gastrointestinal system.

    Science.gov (United States)

    Zhang, Ying-Nan; Sun, Guo-Xin; Williams, Paul N; Huang, Qing; Zhu, Yong-Guan

    2011-05-15

    Consumption of arsenic (As) wine is a traditional activity during the classic Chinese festival of Duanwu, colloquially known worldwide as the Dragon Boat Day. Arsenic wine is drunk on the morning of the fifth day of the fifth lunar calendar month to commemorate the death of Qu Yuan, a famed Chinese poet who drowned himself in protest of a corrupt government, and to protect against ill fortune. Although realgar minerals are characteristically composed of sparingly soluble tetra-arsenic tetra-sulfides (As(4)S(4)), purity does vary with up to 10% of As being present as non-sulfur bound species, such as arsenate (As(V)) and arsenite (As(III)). Despite, the renewed interest in As speciation and the bioaccessibility of the active As components in realgar based Chinese medicines, little is known about the safety surrounding the cultural practice of drinking As wine. In a series of experiments the speciation and solubility of As in a range of wines were investigated. Furthermore, a simulated gastrointestinal system was employed to predict the impact of digestive processes on As bioavailability. The predominant soluble As species found in all the wines were As(III) and As(V). Based on typical As wine recipes employing 0.1 g realgar mL(-1) wine, the concentration of dissolved As ranged from ca. 100 to 400 mg L(-1) depending on the ethanol content of the preparation: with the As solubility found to be higher in wines with a lower proportion of ethanol. Based on a common 100 mL measure of wine with a concentration of 400 mg As L(-1), the amount of soluble As would equate to around half of the acute minimal lethal dose for adults. This is likely an underestimate of the bioaccessible concentration, as a three-fold increase in bioaccessibility could be observed in the intestinal phase based on the results from the stimulated gastrointestinal system.

  4. Revisiting Pocos de Caldas. Application of the co-precipitation approach to establish realistic solubility limits for performance assessment

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, J.; Duro, L.; Jordana, S.; Cera, E. [QuantiSci, Barcelona (Spain)

    1996-02-01

    Solubility limits constitute a critical parameter for the determination of the mobility of radionuclides in the near field and the geosphere, and consequently for the performance assessment of nuclear waste repositories. Mounting evidence from natural system studies indicate that trace elements, and consequently radionuclides, are associated to the dynamic cycling of major geochemical components. We have recently developed a thermodynamic approach to take into consideration the co-precipitation and co-dissolution processes that mainly control this linkage. The approach has been tested in various natural system studies with encouraging results. The Pocos de Caldas natural analogue was one of the sites where a full testing of our predictive geochemical modelling capabilities were done during the analogue project. We have revisited the Pocos de Caldas data and expanded the trace element solubility calculations by considering the documented trace metal/major ion interactions. This has been done by using the co-precipitation/co-dissolution approach. The outcome is as follows: A satisfactory modelling of the behaviour of U, Zn and REEs is achieved by assuming co-precipitation with ferrihydrite. Strontium concentrations are apparently controlled by its co-dissolution from Sr-rich fluorites. From the performance assessment point of view, the present work indicates that calculated solubility limits using the co-precipitation approach are in close agreement with the actual trace element concentrations. Furthermore, the calculated radionuclide concentrations are 2-4 orders of magnitude lower than conservative solubility limits calculated by assuming equilibrium with individual trace element phases. 34 refs, 18 figs, 13 tabs.

  5. The inhibition of lung cancer cell growth by intracellular immunization with LC-1 ScFv

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A monoclonal antibody, LC-l, recognizing lung cancer associated common antigens was obtained in authors' laboratory. Its single chain Fv fragment (ScFv) named LC-1 ScFv was constructed based on recombinant phage displayed techniques. For expression on cell membrane, LC-1 ScFv was cloned into pDisplay vector, which directed the cloned gene to express as cell membrane bound protein. The resulting plasmid was sequenced and then introduced by the lipofectin method into a lung adenocarcinoma cell line SPC-A-1. G418 resistant cells were obtained by G418 selection. After transfection, LC-1 ScFv expression was observed by Western blot analysis and the expression of cognate antigens was down-regulated as shown in ELISA assay. SPC-A-1-pDisplay-ScFv cells grew in vitro at lower speed than the control intact cells and the cells transfected with vacant vector. Flow cytometry analysis detected a substantial increase in G1 phase and decrease in S phase in population of SPC-A-1-pDisplay-ScFv cells compared to SPC-A-1 and SPC-A1-pDisplay cells. Semi-quantitative RT-PCR analysis showed that c-myc expression was down-regulated in SPC-A-1-pDisplay-ScFv cells. It seems that the antigens recognized by LC-1 may be in some way involved in a growth stimulating pathway and the antibody blocking of the function of the antigens shut down the pathway and thus down-regulate the expression of c-myc and growth of the cells.

  6. Cloning, expression, purification, and characterization of LC-1 ScFv with GFP tag

    Institute of Scientific and Technical Information of China (English)

    LU Min; GONG Xing-guo; YU Hong; LI Jian-yong

    2005-01-01

    Total RNA was isolated from the hybridoma cell line (LC-1), which secretes anti-lung adenocarcinoma monoclonal antibody, and was transferred into cDNA. Based on the FR1 (framework region 1) and FR4 conserved regions of LC-I gene, the variable regions of heavy chain (Vh) and light chain (Vl) were amplified, and the Vh and modified Vl were connected to single chain Fv (ScFv) by SOE-PCR (splice overlap extension PCR). The modified ScFv was fused with green fluorescent protein (GFP)and introduced into E. coli JMi09. The fusion protein induced by IPTG (Isopropylthiogalactoside) was about 57000 on a 10%SDS-PAGE gel (10% Sds Polyacrylamide Gel Electrophoresis), and primarily manifested as inclusion bodies. The renatured protein purified by Ni-NTA Superflow resins showed ability to bind to antigen on SPC-A-1 lung adenocarcinoma. In addition, the induced host cells fluoresced bright green under 395 nm wavelength, which indicated that the expected protein with dual activity was expressed in the prokaryotic system. The ScFv with GFP tag used in this research can be applied as a new reagent to detect immunological dye, and provide a feasible way to detect adenocarcinoma in a clinical setting.

  7. Selection of affinity-improved neutralizing human scFv against HBV PreS1 from CDR3 VH/VL mutant library.

    Science.gov (United States)

    Chen, YanMin; Bai, Yin; Guo, XiaoChen; Wang, WenFei; Zheng, Qi; Wang, FuXiang; Sun, Dejun; Li, DeShan; Ren, GuiPing; Yin, JieChao

    2016-07-01

    A CDR3 mutant library was constructed from a previously isolated anti-HBV neutralizing Homo sapiens scFv-31 template by random mutant primers PCR. Then the library was displayed on the inner membrane surface in Escherichia coli periplasmic space. Seven scFv clones were isolated from the mutant library through three rounds of screening by flow cytometry. Competition ELISA assay indicates that isolated scFv fragments show more efficient binding ability to HBV PreS1 compared with parental scFv-31. HBV neutralization assay indicated that two clones (scFv-3 and 59) show higher neutralizing activity by blocking the HBV infection to Chang liver cells. Our method provides a new strategy for rapid screening of mutant antibody library for affinity-enhanced scFv clones and the neutralizing scFvs obtained from this study provide a potential alternative of Hepatitis B immune globulin.

  8. The Development of a Recombinant scFv Monoclonal Antibody Targeting Canine CD20 for Use in Comparative Medicine.

    Directory of Open Access Journals (Sweden)

    Saurabh Jain

    Full Text Available Monoclonal antibodies are leading agents for therapeutic treatment of human diseases, but are limited in use by the paucity of clinically relevant models for validation. Sporadic canine tumours mimic the features of some human equivalents. Developing canine immunotherapeutics can be an approach for modeling human disease responses. Rituximab is a pioneering agent used to treat human hematological malignancies. Biologic mimics that target canine CD20 are just being developed by the biotechnology industry. Towards a comparative canine-human model system, we have developed a novel anti-CD20 monoclonal antibody (NCD1.2 that binds both human and canine CD20. NCD1.2 has a sub-nanomolar Kd as defined by an octet red binding assay. Using FACS, NCD1.2 binds to clinically derived canine cells including B-cells in peripheral blood and in different histotypes of B-cell lymphoma. Immunohistochemical staining of canine tissues indicates that the NCD1.2 binds to membrane localized cells in Diffuse Large B-cell lymphoma, Marginal Zone Lymphoma, and other canine B-cell lymphomas. We cloned the heavy and light chains of NCD1.2 from hybridomas to determine whether active scaffolds can be acquired as future biologics tools. The VH and VL genes from the hybridomas were cloned using degenerate primers and packaged as single chains (scFv into a phage-display library. Surprisingly, we identified two scFv (scFv-3 and scFv-7 isolated from the hybridoma with bioactivity towards CD20. The two scFv had identical VH genes but different VL genes and identical CDR3s, indicating that at least two light chain mRNAs are encoded by NCD1.2 hybridoma cells. Both scFv-3 and scFv-7 were cloned into mammalian vectors for secretion in CHO cells and the antibodies were bioactive towards recombinant CD20 protein or peptide. The scFv-3 and scFv-7 were cloned into an ADEPT-CPG2 bioconjugate vector where bioactivity was retained when expressed in bacterial systems. These data identify a

  9. The Development of a Recombinant scFv Monoclonal Antibody Targeting Canine CD20 for Use in Comparative Medicine.

    Science.gov (United States)

    Jain, Saurabh; Aresu, Luca; Comazzi, Stefano; Shi, Jianguo; Worrall, Erin; Clayton, John; Humphries, William; Hemmington, Sandra; Davis, Paul; Murray, Euan; Limeneh, Asmare A; Ball, Kathryn; Ruckova, Eva; Muller, Petr; Vojtesek, Borek; Fahraeus, Robin; Argyle, David; Hupp, Ted R

    2016-01-01

    Monoclonal antibodies are leading agents for therapeutic treatment of human diseases, but are limited in use by the paucity of clinically relevant models for validation. Sporadic canine tumours mimic the features of some human equivalents. Developing canine immunotherapeutics can be an approach for modeling human disease responses. Rituximab is a pioneering agent used to treat human hematological malignancies. Biologic mimics that target canine CD20 are just being developed by the biotechnology industry. Towards a comparative canine-human model system, we have developed a novel anti-CD20 monoclonal antibody (NCD1.2) that binds both human and canine CD20. NCD1.2 has a sub-nanomolar Kd as defined by an octet red binding assay. Using FACS, NCD1.2 binds to clinically derived canine cells including B-cells in peripheral blood and in different histotypes of B-cell lymphoma. Immunohistochemical staining of canine tissues indicates that the NCD1.2 binds to membrane localized cells in Diffuse Large B-cell lymphoma, Marginal Zone Lymphoma, and other canine B-cell lymphomas. We cloned the heavy and light chains of NCD1.2 from hybridomas to determine whether active scaffolds can be acquired as future biologics tools. The VH and VL genes from the hybridomas were cloned using degenerate primers and packaged as single chains (scFv) into a phage-display library. Surprisingly, we identified two scFv (scFv-3 and scFv-7) isolated from the hybridoma with bioactivity towards CD20. The two scFv had identical VH genes but different VL genes and identical CDR3s, indicating that at least two light chain mRNAs are encoded by NCD1.2 hybridoma cells. Both scFv-3 and scFv-7 were cloned into mammalian vectors for secretion in CHO cells and the antibodies were bioactive towards recombinant CD20 protein or peptide. The scFv-3 and scFv-7 were cloned into an ADEPT-CPG2 bioconjugate vector where bioactivity was retained when expressed in bacterial systems. These data identify a recombinant anti-CD20

  10. Development of single chain variable fragment (scFv) antibodies against surface proteins of 'Ca. Liberibacter asiaticus'.

    Science.gov (United States)

    Yuan, Qing; Jordan, Ramon; Brlansky, Ronald H; Minenkova, Olga; Hartung, John

    2016-03-01

    'Candidatus Liberibacter asiaticus' is the causal agent of citrus huanglongbing, the most serious disease of citrus worldwide. We have developed and applied immunization and affinity screening methods to develop a primary library of recombinant single chain variable fragment (scFv) antibodies in an M13 vector, pKM19. The antibody population is enriched for antibodies that bind antigens of 'Ca. Liberibacter asiaticus'. The primary library has more than 10(7) unique antibodies and the genes that encode them. We have screened this library for antibodies that bind to specifically-chosen proteins that are present on the surface of 'Ca. Liberibacter asiaticus'. These proteins were used as targets for affinity-based selection of scFvs that bind to the major outer membrane protein, OmpA; the polysaccharide capsule protein KpsF; a protein component of the type IV pilus (CapF); and, two flagellar proteins FlhA and FlgI. These scFvs have been used in ELISA and dot blot assays against purified protein antigens and 'Ca. Liberibacter asiaticus' infected plant extracts. We have also recloned many of these scFvs into a plasmid expression vector designed for the production of scFvs. Screening of these scFvs was more efficient when phage-bound, rather than soluble scFvs, were used. We have demonstrated a technology to produce antibodies at will and against any protein target encoded by 'Ca. Liberibacter asiaticus'. Applications could include advanced diagnostic methods for huanglongbing and the development of immune labeling reagents for in planta applications.

  11. NOVEL AMYLOID-BETA SPECIFIC scFv and VH ANTIBODY FRAGMENTS FROM HUMAN AND MOUSE PHAGE DISPLAY ANTIBODY LIBRARIES

    Science.gov (United States)

    Medecigo, M.; Manoutcharian, K.; Vasilevko, V.; Govezensky, T.; Munguia, M. E.; Becerril, B.; Luz-Madrigal, A.; Vaca, L.; Cribbs, D. H.; Gevorkian, G.

    2010-01-01

    Anti-amyloid immunotherapy has been proposed as an appropriate therapeutic approach for Alzheimer’s disease (AD). Significant efforts have been made towards the generation and assessment of antibody-based reagents capable of preventing and clearing amyloid aggregates as well as preventing their synaptotoxic effects. In this study, we selected a novel set of human anti-amyloid-beta peptide 1-42 (Aβ1-42) recombinant monoclonal antibodies in a single chain fragment variable (scFv) and a single domain (VH) formats. We demonstrated that these antibody fragments recognize in a specific manner amyloid beta deposits in APP/Tg mouse brains, inhibit toxicity of oligomeric Aβ1-42 in neuroblastoma cell cultures in a concentration-dependently manner and reduced amyloid deposits in APP/Tg2576 mice after intracranial administration. These antibody fragments recognize epitopes in the middle/C-terminus region of Aβ, which makes them strong therapeutic candidates due to the fact that most of the Aβ species found in the brains of AD patients display extensive N-terminus truncations/modifications. PMID:20451261

  12. Assessment of efficacy and safety of various adjuvant formulations with a total soluble extract of Trichinella spiralis

    Directory of Open Access Journals (Sweden)

    Aucouturier J.

    2001-06-01

    Full Text Available Trichinellosis, a re-emerging zoonosis in several countries and pig, is the main species responsible for its transmission to human. Vaccination of swine could be an alternative to prevent the risk of human contamination. In order to develop an efficient and safe inactivate vaccine, the choice of the adjuvant is an important issue. The aim of this study was to develop and select potent and safe adjuvants by screening them in an experimental model with a crude soluble antigen from L1 muscular larvae (ML of Trichinella spiralis (Ts. The efficacy was checked by the quantification of specific antibody levels. Specific and non-specific IgE antibody levels were also assessed. Safety was checked by the assessment of the local reaction at the injection site.Various Montanide® ISA adjuvant formulations including water in oil, oil in water and multiphasic emulsions, but also nanoparticles or microbeads were tested. The results clearly showed differences between the antibody responses induced by the adjuvants and demonstrated the necessity to use an adjuvant to obtain a specific IgG (IgG1or lgG2a response directed against the total soluble extract of Ts. All the formulations enhanced the humoral immune response. The origin of the oil contained in the emulsions played an important role on the efficacy. Indeed emulsions based on mineral oils were more efficient than those based on metabolisable oils. However it was linked with stronger local reactions. Multiphasic and oil in water emulsions but also nanoparticles failed to induce 1gG2a antibody levels. Microbeads and water in oil formulations based on mineral oils were more efficient. This experimentation allowed then the selection of several adjuvants which efficacy will be further Investigated by a challenge test and an analysis of the cellular populations involved in the mechanism of the immune response.

  13. A humanized anti-M2 scFv shows protective in vitro activity against influenza

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, Andrew M [Los Alamos National Laboratory; Velappan, Nileena [Los Alamos National Laboratory; Schmidt, Jurgen G [Los Alamos National Laboratory

    2008-01-01

    M2 is one of the most conserved influenza proteins, and has been widely prospected as a potential universal vaccine target, with protection predominantly mediated by antibodies. In this paper we describe the creation of a humanized single chain Fv from 14C2, a potent monoclonal antibody against M2. We show that the humanized scFv demonstrates similar activity to the parental mAb: it is able to recognize M2 in its native context on cell surfaces and is able to show protective in vitro activity against influenza, and so represents a potential lead antibody candidate for universal prophylactic or therapeutic intervention in influenza.

  14. Production, purification, and characterization of scFv TNF ligand fusion proteins.

    Science.gov (United States)

    Fick, Andrea; Wyzgol, Agnes; Wajant, Harald

    2012-01-01

    Single-chain variable fragments (scFvs) specific for tumor-associated cell surface antigens are the most broadly used reagents to direct therapeutic or diagnostic effector molecules, such as toxins, radioisotopes, and CD3-stimulating scFvs, to tumors. One novel class of effector molecules that can be targeted to tumors by scFvs are ligands of the tumor necrosis factor (TNF) family. Typically, these molecules have apoptosis inducing and/or immune stimulating properties and are therefore highly attractive for cancer treatment. N-terminal fusion of scFvs does not interfere with the receptor binding capabilities of TNF ligands and thus allows the straightforward generation of scFv TNF ligand fusion proteins. We report here a protocol for the purification of eukaryotically produced scFv TNF ligand fusion proteins based on affinity chromatography on anti-Flag agarose and further describe assays for the determination of the targeting index of this type of scFv-targeted proteins.

  15. A Novel Human scFv Library with Non-Combinatorial Synthetic CDR Diversity.

    Science.gov (United States)

    Bai, Xuelian; Kim, Jihye; Kang, Seungmin; Kim, Wankyu; Shim, Hyunbo

    2015-01-01

    The present work describes the construction and validation of a human scFv library with a novel design approach to synthetic complementarity determining region (CDR) diversification. The advantage of synthetic antibody libraries includes the possibility of exerting fine control over factors like framework sequences, amino acid and codon usage, and CDR diversity. However, random combinatorial synthesis of oligonucleotides for CDR sequence diversity also produces many clones with unnatural sequences and/or undesirable modification motifs. To alleviate these issues, we designed and constructed a novel semi-synthetic human scFv library with non-combinatorial, pre-designed CDR diversity and a single native human framework each for heavy, kappa, and lambda chain variable domains. Next-generation sequencing analysis indicated that the library consists of antibody clones with highly nature-like CDR sequences and the occurrence of the post-translational modification motifs is minimized. Multiple unique clones with nanomolar affinity could be isolated from the library against a number of target antigens, validating the library design strategy. The results demonstrate that it is possible to construct a functional antibody library using low, non-combinatorial synthetic CDR diversity, and provides a new strategy for the design of antibody libraries suitable for demanding applications.

  16. Assessment of functional integrity of liver among workers exposed to soluble nickel compounds during nickel plating

    Directory of Open Access Journals (Sweden)

    Kalahasthi Ravi Babu

    2006-01-01

    Full Text Available The present study investigates the functional integrity of liver among workers exposed to nickel during nickel-plating process. The functional integrity of liver was assessed in 69 workers who are exposed to nickel during nickel plating and considered as nickel-exposed workers; and 50 administrative workers residing in same city, but away from the place of work of study group, were considered as control group. The level of urine nickel was measured by using a flameless atomic absorption spectrophotometer. Using kits supplied by Bayer Diagnostics, we determined serum markers of liver function tests. Results: The levels of urine nickel were significantly increased in high-and moderate-exposure groups as compared to control group. The levels of serum transaminases -viz, alanine transaminase and aspartate transaminase-were significantly increased in nickel-exposed workers, who had high urine nickel levels as compared to control group. The level of serum albumin was negatively correlated with urine nickel levels. The levels of serum transaminases and serum g- glutamyl- transpeptidase were positively and significantly correlated with urine nickel levels. Conclusion: Results indicate that workers who had high urine nickel levels had a consistent effect on hepatic inflammatory function.

  17. Sorption, Diffusion and Solubility Databases for Performance Assessment; Base de Datos de Sorcion, Difusion y Solubilidad para la Evacuacion del Comportamiento

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Gutierrez, M. [Ciemat, Madrid (Spain)

    2000-07-01

    This report presents a deterministic and probabilistic databases for application in Performance Assessment of a high-level radioactive waste disposal. This work includes a theoretical description of sorption, diffusion and solubility phenomena of radionuclides in geological media. The report presents and compares the database of different nuclear wastes management agencies, describes the materials in the Spanish reference system, and the results of sorption diffusion and solubility in this system, with both the deterministic and probabilistic approximation. the probabilistic approximation is presented in the form of probability density functions (pdf). (Author) 52 refs.

  18. Hyperspectral Imaging Coupled with Random Frog and Calibration Models for Assessment of Total Soluble Solids in Mulberries

    Directory of Open Access Journals (Sweden)

    Yan-Ru Zhao

    2015-01-01

    Full Text Available Chemometrics methods coupled with hyperspectral imaging technology in visible and near infrared (Vis/NIR region (380–1030 nm were introduced to assess total soluble solids (TSS in mulberries. Hyperspectral images of 310 mulberries were acquired by hyperspectral reflectance imaging system (512 bands and their corresponding TSS contents were measured by a Brix meter. Random frog (RF method was used to select important wavelengths from the full wavelengths. TSS values in mulberry fruits were predicted by partial least squares regression (PLSR and least-square support vector machine (LS-SVM models based on full wavelengths and the selected important wavelengths. The optimal PLSR model with 23 important wavelengths was employed to visualise the spatial distribution of TSS in tested samples, and TSS concentrations in mulberries were revealed through the TSS spatial distribution. The results declared that hyperspectral imaging is promising for determining the spatial distribution of TSS content in mulberry fruits, which provides a reference for detecting the internal quality of fruits.

  19. An efficient method for variable region assembly in the construction of scFv phage display libraries using independent strand amplification.

    Science.gov (United States)

    Sotelo, Pablo; Collazo, Noberto; Zuñiga, Roberto; Gutiérrez-González, Matías; Catalán, Diego; Ribeiro, Carolina Hager; Aguillón, Juan Carlos; Molina, María Carmen

    2012-01-01

    Phage display library technology is a common method to produce human antibodies. In this technique, the immunoglobulin variable regions are displayed in a bacteriophage in a way that each filamentous virus displays the product of a single antibody gene on its surface. From the collection of different phages, it is possible to isolate the virus that recognizes specific targets. The most common form in which to display antibody variable regions in the phage is the single chain variable fragment format (scFv), which requires assembly of the heavy and light immunoglobulin variable regions in a single gene. In this work, we describe a simple and efficient method for the assembly of immunoglobulin heavy and light chain variable regions in a scFv format. This procedure involves a two-step reaction: (1) DNA amplification to produce the single strand form of the heavy or light chain gene required for the fusion; and (2) mixture of both single strand products followed by an assembly reaction to construct a complete scFv gene. Using this method, we produced 6-fold more scFv encoding DNA than the commonly used splicing by overlap extension PCR (SOE-PCR) approach. The scFv gene produced by this method also proved to be efficient in generating a diverse scFv phage display library. From this scFv library, we obtained phages that bound several non-related antigens, including recombinant proteins and rotavirus particles.

  20. Generation and Characterization of an scFv Directed against Site II of Rabies Glycoprotein

    Directory of Open Access Journals (Sweden)

    Shukra M. Aavula

    2011-01-01

    Full Text Available Recombinant antibody phage display technology is a vital tool that facilitates identification of specific binding molecules to a target enabling the rapid generation and selection of high affinity, fully human, or mouse antibody product candidates essentially directed towards disease target appropriate for antibody therapy. In this study, a recombinant single-chain Fv antibody fragment (scFv A11 was isolated from immune spleen cells obtained from mice immunized with inactivated rabies virus (Pasteur strain using standard methodology and was characterized for its specificity towards the rabies virus glycoprotein. Epitope mapping using peptide libraries and truncated glycoprotein polypeptides suggested that A11 bound to the antigenic site II of rabies glycoprotein against which a majority of rabies virus neutralizing antibodies are directed. The use of the above technology could, therefore, allow development of scFvs with different specificities against the rabies glycoprotein as an alternative to the more cumbersome protocols used for the development of monoclonal antibodies.

  1. Development of single chain variable fragment (scFv) antibodies against Xylella fastidiosa subsp. pauca by phage display.

    Science.gov (United States)

    Yuan, Qing; Jordan, Ramon; Brlansky, Ronald H; Istomina, Olga; Hartung, John

    2015-10-01

    Xylella fastidiosa is a member of the gamma proteobacteria. It is fastidious, insect-vectored and xylem-limited and causes a variety of diseases, some severe, on a wide range of economically important perennial crops, including grape and citrus. Antibody based detection assays are commercially available for X. fastidiosa, and are effective at the species, but not at the subspecies level. We have made a library of scFv antibody fragments directed against X. fastidiosa subsp. pauca strain 9a5c (citrus) by using phage display technology. Antibody gene repertoires were PCR-amplified using 23 primers for the heavy chain variable region (V(H)) and 21 primers for the light chain variable region (V(L)). The V(H) and V(L) were joined by overlap extension PCR, and then the genes of the scFv library were ligated into the phage vector pKM19. The library contained 1.2×10(7) independent clones with full-length scFv inserts. In each of 3cycles of affinity-selection with 9a5c, about 1.0×10(12) phage were used for panning with 4.1×10(6), 7.1×10(6), 2.1×10(7) phage recovered after the first, second and third cycles, respectively. Sixty-six percent of clones from the final library bound X. fastidiosa 9a5c in an ELISA. Some of these scFv antibodies recognized strain 9a5c and did not recognize X. fastidiosa strains that cause Pierce's disease of grapevine.

  2. Recombinant scFv Antibodies against E Protein and N Protein of Severe Acute Respiratory Syndrome Virus

    Institute of Scientific and Technical Information of China (English)

    Hui LIU; Yan-Li DING; Wei HAN; Mei-Yun LIU; Rui-Yang TIAN; Sheng-Li YANG; Yi GONG

    2004-01-01

    Three single chain antibodies(scFv)against the proteins of severe acute respiratory syndrome coronavirus(SARS-CoV)were isolated by phage display from an scFv antibody library.Bio-panning was carried out against immobilized purified envelope(E)and nucleocapsid(N)proteins of SARS-CoV.Their binding activity and specificity to E or N protein of SARS-CoV were characterized by phage-ELISA.Two of them,B 10 and C20,could recognize non-overlapping epitopes of the E protein according to the two-site binding test result.Clone A 17 could recognize N protein.The sequence of the epitope or overlapping epitope of scFv antibody A17 was PTDSTDNNQNGGRNGARPKQRRPQ.The affinity(equilibrium dissociation constant,Kd)of SARS-CoV E protein was 5.7×10-8 M for B10 and 8.9×10-8 M for C20.The affinity of A17for N protein was 2.1 x 10-6 M.All three scFv antibodies were purified with affinity chromatography and determined by Western blot.

  3. Primary structure and functional scFv antibody expression of an antibody against the human protooncogen c-myc.

    Science.gov (United States)

    Fuchs, P; Breitling, F; Little, M; Dübel, S

    1997-06-01

    The immunoglobulin heavy- and light-chain variable region (Vh and Vl) genes were isolated from Myc1-9E10 hybridoma cells, which secreted monoclonal antibody against human oncogen c-myc. The expression vector pOPE52-c-myc was constructed for the recombinant production in E. coli. A 30 kDa single chain fragment (scFv) expression product was found in the periplasmic space by SDS-PAGE and immunoblotting. A significant fraction was processed correctly as demonstrated with an antiserum recognizing the processed aminoterminus only. The specific binding of the scFv fragment to the peptide epitope of the maternal monoclonal antibody was demonstrated and the primary sequence of the variable regions was determined. Sequence comparison with previously published partial Vh and Vl sequences from this hybridoma cell line revealed a genetic heterogeneity for the light chain variable region. The potential use of this scFv as a new tool for detection and purification of tagged proteins, for adding costimulatory signals to the surface of cancer cells as well as for analyzing c-myc function in the living cell by cytoplasmic expression is discussed.

  4. Cell Penetrable Human scFv Specific to Middle Domain of Matrix Protein-1 Protects Mice from Lethal Influenza

    Directory of Open Access Journals (Sweden)

    Fonthip Dong-din-on

    2015-01-01

    Full Text Available A new anti-influenza remedy that can tolerate the virus antigenic variation is needed. Influenza virus matrix protein-1 (M1 is highly conserved and pivotal for the virus replication cycle: virus uncoating, assembly and budding. An agent that blocks the M1 functions should be an effective anti-influenza agent. In this study, human scFv that bound to recombinant M1 middle domain (MD and native M1 of A/H5N1 was produced. Phage mimotope search and computerized molecular docking revealed that the scFv bound to the MD conformational epitope formed by juxtaposed helices 7 and 9 of the M1. The scFv was linked molecularly to a cell penetrable peptide, penetratin (PEN. The PEN-scFv (transbody, when used to treat the cells pre-infected with the heterologous clade/subclade A/H5N1 reduced the viral mRNA intracellularly and in the cell culture fluids. The transbody mitigated symptom severity and lung histopathology of the H5N1 infected mice and caused reduction of virus antigen in the tissues as well as extricated the animals from the lethal challenge in a dose dependent manner. The transbody specific to the M1 MD, either alone or in combination with the cognate human scFvs specific to other influenza virus proteins, should be an effective, safe and mutation tolerable anti-influenza agent.

  5. Soluble NCAM

    DEFF Research Database (Denmark)

    Secher, Thomas

    2008-01-01

    The neural cell adhesion molecule (NCAM) is a membrane-bound glycoprotein involved in homophilic interactions that facilitate cell-cell adhesion. In addition to a number of membrane-bound isoforms, NCAM also exists in several soluble isoforms that have been identified in cerebrospinal fluid, bloo...

  6. Cloning approach and functional analysis of anti-intimin single-chain variable fragment (scFv

    Directory of Open Access Journals (Sweden)

    Elias Waldir P

    2011-02-01

    Full Text Available Abstract Background Intimin is an important virulence factor involved in the pathogenesis of enteropathogenic Escherichia coli (EPEC and enterohemorrhagic Escherichia coli (EHEC. Both pathogens are still important causes of diarrhea in children and adults in many developing and industrialized countries. Considering the fact that antibodies are important tools in the detection of various pathogens, an anti-intimin IgG2b monoclonal antibody was previously raised in immunized mice with the conserved sequence of the intimin molecule (int388-667. In immunoblotting assays, this monoclonal antibody showed excellent specificity. Despite good performance, the monoclonal antibody failed to detect some EPEC and EHEC isolates harboring variant amino acids within the 338-667 regions of intimin molecules. Consequently, motivated by its use for diagnosis purposes, in this study we aimed to the cloning and expression of the single-chain variable fragment from this monoclonal antibody (scFv. Findings Anti-intimin hybridoma mRNA was extracted and reversely transcripted to cDNA, and the light and heavy chains of the variable fragment of the antibody were amplified using commercial primers. The amplified chains were cloned into pGEM-T Easy vector. Specific primers were designed and used in an amplification and chain linkage strategy, obtaining the scFv, which in turn was cloned into pAE vector. E. coli BL21(DE3pLys strain was transformed with pAE scFv-intimin plasmid and subjected to induction of protein expression. Anti-intimin scFv, expressed as inclusion bodies (insoluble fraction, was denatured, purified and submitted to refolding. The protein yield was 1 mg protein per 100 mL of bacterial culture. To test the functionality of the scFv, ELISA and immunofluorescence assays were performed, showing that 275 ng of scFv reacted with 2 mg of purified intimin, resulting in an absorbance of 0.75 at 492 nm. The immunofluorescence assay showed a strong reactivity with

  7. Cereal crops as viable production and storage systems for pharmaceutical scFv antibodies.

    Science.gov (United States)

    Stöger, E; Vaquero, C; Torres, E; Sack, M; Nicholson, L; Drossard, J; Williams, S; Keen, D; Perrin, Y; Christou, P; Fischer, R

    2000-03-01

    This report describes the stable expression of a medically important antibody in the staple cereal crops rice and wheat. We successfully expressed a single-chain Fv antibody (ScFvT84.66) against carcinoembryonic antigen (CEA), a well characterized tumor-associated marker antigen. scFv constructs were engineered for recombinant antibody targeting to the plant cell apoplast and ER. Up to 30 microg/g of functional recombinant antibody was detected in the leaves and seeds of wheat and rice. We confirmed that transgenic dry seeds could be stored for at least five months at room temperature, without significant loss of the amount or activity of scFvT84.66. Our results represent the first transition from model plant expression systems, such as tobacco and Arabidopsis, to widely cultivated cereal crops, such as rice and wheat, for expression of an antibody molecule that has already shown efficacy in clinical applications. Thus, we have established that molecular pharming in cereals can be a viable production system for such high-value pharmaceutical macromolecules. Our findings provide a strong foundation for exploiting alternative uses of cereal crops both in industrialized and developing countries.

  8. Cloning single-chain antibody fragments (ScFv) from hyrbidoma cells.

    Science.gov (United States)

    Toleikis, Lars; Frenzel, André

    2012-01-01

    Despite the rising impact of the generation of antibodies by phage display and other technologies, hybridoma technology still provides a valuable tool for the generation of high-affinity binders against different targets. But there exist several limitations of using hybridoma-derived antibodies. The source of the hybridoma clones are mostly rat or mouse B-lymphocytes. Therefore a human-anti-mouse or human-anti-rat antibody response may result in immunogenicity of these antibodies. This leads to the necessity of humanization of these antibodies where the knowledge of the amino acid sequence of the proteins is inalienable. Furthermore, additional in vitro modifications, e.g., affinity maturation or fusion to other proteins, are dependent on cloning of the antigen-binding domains.Here we describe the isolation of RNA from hybridoma cells and the primers that can be used for the amplification of VL and VH as well as the cloning of the antibody in scFv format and its expression in Escherichia coli.

  9. Assessment of the solubility of thorium and uranium from black sand of Camargue in both simulated lung and gut fluids for dose calculation after internal exposure

    Energy Technology Data Exchange (ETDEWEB)

    Frelon, S.; Chazel, V.; Tourlonias, E.; Paquet, F. [IRSN/ DRPH/ SRBE, LRTOX, BP 166, 26702 Pierrelatte Cedex (France); Blanchardon, E. [IRSN/ DRPH/ SDI, LEDI, BP 17, 92262 Fontenay Aux Roses Cedex (France); Bouisset, P. [IRSN/ DEI/ STEME, LMRE, Bois des rames, 91400 Orsay (France); Pourcelot, L. [IRSN/ DEI/ SESURE, LERCM, BP3, 13 115 St Paul lez Durance Cedex (France)

    2006-07-01

    In the south of France, some beaches of Camargue present a high rate of natural radioactivity due to thorium and uranium from zircon and apatite heavy minerals present in the so-called black sand. These radionuclides may lead to internal exposure consecutive to inhalation or ingestion of this sand. The accurate assessment of radiological risk after internal exposure of public frequenting these beaches requires some information on the human bioavailability of U and Th from the sand. Both routes of intake were studied in this work and the consecutive dose delivered was calculated under two different scenarios for each type of exposure. As far as inhalation is concerned, the first important conclusion is that the inhalable fraction, i.e. particles with aerodynamic diameters below 50 {mu}m, was tiny (0.002%) in this sample of sand. Moreover in vitro assays of solubility were performed for this fraction and showed that U and Th as well as their progeny presented moderate solubility. Then effective doses under several scenarios were calculated and seem to demonstrate a very poor risk of exposure after inhalation. Indeed, a dose of 1 mSv would be received by a babies after inhalation of about 40 Kg of sand, that is impossible, whereas a more realistic scenario of chronic exposure only reached 31 {mu} Sv. In case of ingestion, the solubility of Th and U in the gastrointestinal fluids was found to be very low with a maximum solubility of 0.5% of the initial mass of radioelement in the sample of sand. Then the worst hypothesis studied yields an effective dose of 0.018 mSv./(g-swallowed sand) that is roughly 50 times less than the legal annual dose limit for members of the public. as a conclusion, the possible internal dose after exposure by inhalation or ingestion of black sand of Camargue seems to be very low under the conditions of this study. (N.C.)

  10. Synthesis and application of a N-1' fluorescent biotinyl derivative inducing the specific carboxy-terminal dual labeling of a novel RhoB-selective scFv.

    Science.gov (United States)

    Chaisemartin, L; Chinestra, P; Favre, G; Blonski, C; Faye, J C

    2009-05-20

    The fluorescent site-specific labeling of protein would provide a new, easy-to-use alternative to biochemical and immunochemical methods. We used an intein-mediated strategy for covalent labeling of the carboxy-terminal amino acid of a RhoB-selective scFv previously isolated from a phage display library (a human synthetic V(H) + V(L) scFv phage library). The scFv fused to the Mxe intein was produced in E. coli and purified and was then labeled with a newly synthesized fluorescent biotinyl cysteine derivative capable of inducing scFv-Mxe intein splicing. In this study, we investigated the splicing and labeling properties of various amino acids in the hinge domain between scFv and Mxe under thiol activation. In this dual labeling system, the fluorescein is used for antibody detection and biotin is used for purification, resulting in a high specific activity for fluorescence. We then checked that the purified biotinylated fluorescent scFv retained its selectivity for RhoB without modification of its affinity.

  11. Tetanus Neurotoxin Neutralizing Antibodies Screened from a Human Immune scFv Antibody Phage Display Library.

    Science.gov (United States)

    Wang, Han; Yu, Rui; Fang, Ting; Yu, Ting; Chi, Xiangyang; Zhang, Xiaopeng; Liu, Shuling; Fu, Ling; Yu, Changming; Chen, Wei

    2016-09-11

    Tetanus neurotoxin (TeNT) produced by Clostridium tetani is one of the most poisonous protein substances. Neutralizing antibodies against TeNT can effectively prevent and cure toxicosis. Using purified Hc fragments of TeNT (TeNT-Hc) as an antigen, three specific neutralizing antibody clones recognizing different epitopes were selected from a human immune scFv antibody phage display library. The three antibodies (2-7G, 2-2D, and S-4-7H) can effectively inhibit the binding between TeNT-Hc and differentiated PC-12 cells in vitro. Moreover, 2-7G inhibited TeNT-Hc binding to the receptor via carbohydrate-binding sites of the W pocket while 2-2D and S-4-7H inhibited binding of the R pocket. Although no single mAb completely protected mice from the toxin, they could both prolong survival when challenged with 20 LD50s (50% of the lethal dose) of TeNT. When used together, the mAbs completely neutralized 1000 LD50s/mg Ab, indicating their high neutralizing potency in vivo. Antibodies recognizing different carbohydrate-binding pockets could have higher synergistic toxin neutralization activities than those that recognize the same pockets. These results could lead to further production of neutralizing antibody drugs against TeNT and indicate that using TeNT-Hc as an antigen for screening human antibodies for TeNT intoxication therapy from human immune antibody library was convenient and effective.

  12. Tetanus Neurotoxin Neutralizing Antibodies Screened from a Human Immune scFv Antibody Phage Display Library

    Science.gov (United States)

    Wang, Han; Yu, Rui; Fang, Ting; Yu, Ting; Chi, Xiangyang; Zhang, Xiaopeng; Liu, Shuling; Fu, Ling; Yu, Changming; Chen, Wei

    2016-01-01

    Tetanus neurotoxin (TeNT) produced by Clostridium tetani is one of the most poisonous protein substances. Neutralizing antibodies against TeNT can effectively prevent and cure toxicosis. Using purified Hc fragments of TeNT (TeNT-Hc) as an antigen, three specific neutralizing antibody clones recognizing different epitopes were selected from a human immune scFv antibody phage display library. The three antibodies (2-7G, 2-2D, and S-4-7H) can effectively inhibit the binding between TeNT-Hc and differentiated PC-12 cells in vitro. Moreover, 2-7G inhibited TeNT-Hc binding to the receptor via carbohydrate-binding sites of the W pocket while 2-2D and S-4-7H inhibited binding of the R pocket. Although no single mAb completely protected mice from the toxin, they could both prolong survival when challenged with 20 LD50s (50% of the lethal dose) of TeNT. When used together, the mAbs completely neutralized 1000 LD50s/mg Ab, indicating their high neutralizing potency in vivo. Antibodies recognizing different carbohydrate-binding pockets could have higher synergistic toxin neutralization activities than those that recognize the same pockets. These results could lead to further production of neutralizing antibody drugs against TeNT and indicate that using TeNT-Hc as an antigen for screening human antibodies for TeNT intoxication therapy from human immune antibody library was convenient and effective. PMID:27626445

  13. Tetanus Neurotoxin Neutralizing Antibodies Screened from a Human Immune scFv Antibody Phage Display Library

    Directory of Open Access Journals (Sweden)

    Han Wang

    2016-09-01

    Full Text Available Tetanus neurotoxin (TeNT produced by Clostridium tetani is one of the most poisonous protein substances. Neutralizing antibodies against TeNT can effectively prevent and cure toxicosis. Using purified Hc fragments of TeNT (TeNT-Hc as an antigen, three specific neutralizing antibody clones recognizing different epitopes were selected from a human immune scFv antibody phage display library. The three antibodies (2-7G, 2-2D, and S-4-7H can effectively inhibit the binding between TeNT-Hc and differentiated PC-12 cells in vitro. Moreover, 2-7G inhibited TeNT-Hc binding to the receptor via carbohydrate-binding sites of the W pocket while 2-2D and S-4-7H inhibited binding of the R pocket. Although no single mAb completely protected mice from the toxin, they could both prolong survival when challenged with 20 LD50s (50% of the lethal dose of TeNT. When used together, the mAbs completely neutralized 1000 LD50s/mg Ab, indicating their high neutralizing potency in vivo. Antibodies recognizing different carbohydrate-binding pockets could have higher synergistic toxin neutralization activities than those that recognize the same pockets. These results could lead to further production of neutralizing antibody drugs against TeNT and indicate that using TeNT-Hc as an antigen for screening human antibodies for TeNT intoxication therapy from human immune antibody library was convenient and effective.

  14. Screening and immunological identification of the human ScFv antibody against PSMA%全人源抗PSMA单链抗体的筛选及免疫活性鉴定

    Institute of Scientific and Technical Information of China (English)

    张才田; 刘金霞

    2011-01-01

    Objective To screen and identify a human single-chain variable fragment(scFv) antibody against prostate specific membrane antigen(PSMA) from a human scFv antibody library.Methods Using a synthetic PSMA peptide as the coating antigen, the antibody library was screened by five rounds of combining-eluting-amplification.The phage antibody against PSMA with high specificity was screened out from the human scFv antibody library and its binding ability to the antigen was tested by ELISA.The soluble antibody was produced by plasmids extracted from highly specific clones, whose binding ability to PSMA was further identified by Western blot and immunohistochemistry.The affinity constant of the soluble antibody was measured by non-competitive ELISA.Results The screened phage antibody was specific for PSMA by ELISA.The soluble antibody was also specific for PSMA, its molecular weight was about 30 kD by SDS-PAGE and its affinity constant was about 5.077 × 106 L/mol.Conclusions The screened scFv antibody is specific and has low immunogenicity.It can be further used in the target treatment of malignant tumors.%目的 从全人源单链噬菌体抗体库中筛选出抗前列腺特异性膜抗原(PSMA)特异性单链抗体并进行免疫活性鉴定.方法 以合成的PSMA多肽为抗原,经过五轮吸附-洗脱-扩增,从单链噬菌体抗体库中筛选出特异性抗PSMA噬菌体抗体,ELISA检测其抗原结合能力,并对特异性较强的克隆提取质粒,表达可溶性抗体.Western Blotting和免疫组织化学检测其抗原结合性,非竞争ELSIA法检测其亲和常数.结果 从单链噬菌体抗体库中筛选出的噬菌体抗体,经ELISA鉴定为抗PSMA的特异性噬菌体抗体.抗PSMA可溶性抗体相对分子质量约为3.0×104,与PSMA特异性结合,其亲和常数约为5.077×106L/mol.结论 所得全人源抗PSMA单链抗体保留完整抗体分子结合抗原的特异性,免疫原性弱,是肿瘤导向治疗的理想栽体.

  15. Generation of functional scFv intrabody to abate the expression of CD147 surface molecule of 293A cells

    Directory of Open Access Journals (Sweden)

    Mai Sabine

    2008-01-01

    Full Text Available Abstract Background Expression of intracellular antibodies (intrabodies has become a broadly applicable technology for generation of phenotypic knockouts in vivo. The method uses surface depletion of cellular membrane proteins to examine their biological function. In this study, we used this strategy to block the transport of cell surface molecule CD147 to the cell membrane. Phage display technology was introduced to generate the functional antibody fragment to CD147, and we subsequently constructed a CD147-specific scFv that was expressed intracellularly and retained in the endoplasmic reticulum by adenoviral gene transfer. Results The recombinant antibody fragments, Fab and scFv, of the murine monoclonal antibody (clone M6-1B9 reacted specifically to CD147 by indirect enzyme-linked immunosorbent assays (ELISA using a recombinant CD147-BCCP as a target. This indicated that the Fab- and scFv-M6-1B9 displaying on phage surfaces were correctly folded and functionally active. We subsequently constructed a CD147-specific scFv, scFv-M6-1B9-intrabody, in 293A cells. The expression of CD147 on 293A cell surface was monitored at 36 h after transduction by flow cytometry and demonstrated remarkable reduction. Colocalization of scFv-M6-1B9 intrabody with CD147 in the ER network was depicted using a 3D deconvolution microscopy system. Conclusion The results suggest that our approach can generate antibody fragments suitable for decreasing the expression of CD147 on 293A cells. This study represents a step toward understanding the role of the cell surface protein, CD147.

  16. Soluble vs. insoluble fiber

    Science.gov (United States)

    Insoluble vs. soluble fiber; Fiber - soluble vs. insoluble ... There are 2 different types of fiber -- soluble and insoluble. Both are important for health, digestion, and preventing diseases. Soluble fiber attracts water and turns to gel during digestion. ...

  17. Neural network and principal component regression in non-destructive soluble solids content assessment:a comparison

    Institute of Scientific and Technical Information of China (English)

    Kim-seng CHIA; Herlina ABDUL RAHIM; Ruzairi ABDUL RAHIM

    2012-01-01

    Visible and near infrared spectroscopy is a non-destructive,green,and rapid technology that can be utilized to estimate the components of interest without conditioning it,as compared with classical analytical methods.The objective of this paper is to compare the performance of artificial neural network (ANN) (a nonlinear model) and principal component regression (PCR) (a linear model) based on visible and shortwave near infrared (VIS-SWNIR) (400-1000 nm) spectra in the non-destructive soluble solids content measurement of an apple.First,we used multiplicative scattering correction to pre-process the spectral data.Second,PCR was applied to estimate the optimal number of input variables.Third,the input variables with an optimal amount were used as the inputs of both multiple linear regression and ANN models.The initial weights and the number of hidden neurons were adjusted to optimize the performance of ANN.Findings suggest that the predictive performance of ANN with two hidden neurons outperforms that of PCR.

  18. Diagnostic potential of recombinant scFv antibodies generated against hemagglutinin protein of influenza A virus

    Directory of Open Access Journals (Sweden)

    Roopali eRajput

    2015-09-01

    Full Text Available Human influenza A viruses have been the cause of enormous socio-economic losses worldwide. In order to combat such a notorious pathogen, hemagglutinin protein (HA has been a preferred target for generation of neutralizing-antibodies, as potent therapeutic/ diagnostic agents. In the present study, recombinant anti-HA single chain variable fragment (scFv antibodies were constructed using the phage display technology to aid in diagnosis and treatment of human influenza A virus infections. Spleen cells of mice hyper-immunized with A/New Caledonia/20/99 (H1N1 virus were used as the source for recombinant antibody (rAb production. The antigen-binding phages were quantified after 6 rounds of bio-panning against A/New Caledonia/20/99 (H1N1, A/California/07/2009 (H1N1-like, or A/Udorn/307/72(H3N2 viruses. The phage yield was maximum for the A/New Caledonia/20/99 (H1N1, however, considerable cross-reactivity was observed for the other virus strains as well. The HA-specific polyclonal rAb preparation was subjected to selection of single clones for identification of high reactive relatively conserved epitopes. The high affinity rAbs were tested against certain known conserved HA epitopes by peptide ELISA. Three recombinant mAbs showed reactivity with both the H1N1 strains and one (C5 showed binding with all the three viral strains. The C5 antibody was thus used for development of an ELISA test for diagnosis of influenza virus infection. Based on the sample size in the current analysis, the ELISA test demonstrated 83.9% sensitivity and 100% specificity. Thus, the ELISA, developed in our study, may prove as a cheaper alternative to the presently used real time RT-PCR test for detection of human influenza A viruses in clinical specimens, which will be beneficial, especially in the developing countries. Since, the two antibodies identified in this study are reactive to conserved HA epitopes; these may prove as potential therapeutic agents as well.

  19. scFv from Antibody That Mimics gp43 Modulates the Cellular and Humoral Immune Responses during Experimental Paracoccidioidomycosis.

    Science.gov (United States)

    Jannuzzi, Grasielle Pereira; Tavares, Aldo Henrique F P; Kaihami, Gilberto Hideo; de Almeida, José Roberto Fogaça; de Almeida, Sandro Rogério; Ferreira, Karen Spadari

    2015-01-01

    Paracoccidioidomycosis (PCM), caused by Paracoccidioides species is a prevalent systemic and progressive mycosis that occurs in Latin America. It is caused by Paracoccidioides species. Immunization with dendritic cells transfected with a plasmid encoding the scFv (pMAC/PS-scFv) that mimics the main antigen of P. brasiliensis (gp43) confers protection in experimental PCM. DCs link innate and adaptive immunity by recognizing invading pathogens and selecting the type of effector T cell to mediate the immune response. Here, we showed that DC-pMAC/PS-scFv induces the activation of CD4+ and CD8+ T cells. Moreover, our results demonstrated that BALB/c mice infected with P. brasiliensis and treated with DC-pMAC/PS-scFv showed the induction of specific IgG production against gp43 and IFN-γ, IL-12 and IL-4 cytokines. Analysis of regional lymph nodes revealed increases in the expression of clec7a, myd88, tlr2, gata3 and tbx21, which are involved in the immune response. Taken together, our results indicate that the scFv modulates the humoral and cellular immune responses and presents epitopes to CD4+ and CD8+ T cells.

  20. scFv from Antibody That Mimics gp43 Modulates the Cellular and Humoral Immune Responses during Experimental Paracoccidioidomycosis.

    Directory of Open Access Journals (Sweden)

    Grasielle Pereira Jannuzzi

    Full Text Available Paracoccidioidomycosis (PCM, caused by Paracoccidioides species is a prevalent systemic and progressive mycosis that occurs in Latin America. It is caused by Paracoccidioides species. Immunization with dendritic cells transfected with a plasmid encoding the scFv (pMAC/PS-scFv that mimics the main antigen of P. brasiliensis (gp43 confers protection in experimental PCM. DCs link innate and adaptive immunity by recognizing invading pathogens and selecting the type of effector T cell to mediate the immune response. Here, we showed that DC-pMAC/PS-scFv induces the activation of CD4+ and CD8+ T cells. Moreover, our results demonstrated that BALB/c mice infected with P. brasiliensis and treated with DC-pMAC/PS-scFv showed the induction of specific IgG production against gp43 and IFN-γ, IL-12 and IL-4 cytokines. Analysis of regional lymph nodes revealed increases in the expression of clec7a, myd88, tlr2, gata3 and tbx21, which are involved in the immune response. Taken together, our results indicate that the scFv modulates the humoral and cellular immune responses and presents epitopes to CD4+ and CD8+ T cells.

  1. The effects of N-terminal insertion into VSV-G of an scFv peptide

    Directory of Open Access Journals (Sweden)

    Piechaczyk Marc

    2006-09-01

    Full Text Available Abstract Recombinant retroviruses, including lentiviruses, are the most widely used vectors for both in vitro and in vivo stable gene transfer. However, the inability to selectively deliver transgenes into cells of interest limits the use of this technology. Due to its wide tropism, stability and ability to pseudotype a range of viral vectors, vesicular stomatitis virus G protein (VSV-G is the most commonly used pseudotyping protein. Here, we attempted to engineer this protein for targeting purposes. Chimaeric VSV-G proteins were constructed by linking a cell-directing single-chain antibody (scFv to its N-terminal. We show that the chimaeric VSV-G molecules can integrate into retroviral and lentiviral particles. HIV-1 particles pseudotyped with VSV-G linked to an scFv against human Major Histocompatibility Complex class I (MHC-I bind strongly and specifically to human cells. Also, this novel molecule preferentially drives lentiviral transduction of human cells, although the titre is considerably lower that viruses pseudotyped with VSV-G. This is likely due to the inefficient fusion activity of the modified protein. To our knowledge, this is the first report where VSV-G was successfully engineered to include a large (253 amino acids exogenous peptide and where attempts were made to change the infection profile of VSV-G pseudotyped vectors.

  2. Cloud droplet activation: solubility revisited

    Directory of Open Access Journals (Sweden)

    L. T. Padró

    2007-02-01

    Full Text Available Soluble compounds present in atmospheric aerosol facilitate their transformation into cloud droplets by depressing the equilibrium vapor pressure required for activation. Their impact depends on the amount of dissolved substance in the aerosol aqueous phase, which in turn is controlled by its solubility. This study explores the impact of particle curvature on solubility, expressed in terms of a Kelvin enhancement. The augmented solubility, termed "Curvature Enhanced Solubility" (CES, is then introduced into Köhler theory for assessment of its impact on CCN activity for several organic compounds with a wide range of aqueous solubility. The interfacial energy between solute and aqueous phase required for quantification of CES is determined from existing correlations based on bulk solubility, and concurrent measurements of contact angle and surface tension. A number of important findings arise from this study: i CES can substantially increase solubility and impact CCN activity but only if the aerosol is initially wet, ii CES can stabilize highly supersaturated solutions, and provide a mechanism for retention of an aerosol aqueous phase even at very low relative humidity (RH, and, iii trace amounts of surfactant impurities can magnify the impact of CES.

  3. Pure Phase Solubility Limits: LANL

    Energy Technology Data Exchange (ETDEWEB)

    C. Stockman

    2001-01-26

    products, complex stability constants, and redox potentials for radionuclides in different oxidation states, form the underlying database to be used for those calculations. The potentially low solubilities of many radionuclides in natural waters constitute the first barrier for their migration from the repository into the environment. Evaluation of this effect requires a knowledge of the site-specific water chemistry and the expected spatial and temporal ranges of its variability. Quantitative determinations of radionuclide solubility in waters within the range of chemistry must be made. Speciation and molecular complexation must be ascertained to interpret and apply solubility results. The solubilities thus determined can be used to assess the effectiveness of solubility in limiting radionuclide migration. These solubilities can also be used to evaluate the effectiveness of other retardation processes expected to occur once dissolution of the source material and migration begin. Understanding the solubility behavior of radionuclides will assist in designing valuable sorption experiments that must be conducted below the solubility limit since only soluble species participate in surface reactions and sorption processes. The present strategy for radionuclide solubility tasks has been to provide a solubility model from bulk-experiments that attempt to bracket the estimate made for this Analysis and Modeling Report (AMR) of water conditions on site. The long-term goal must be to develop a thermodynamic database for solution speciation and solid-state determination as a prerequisite for transport calculations and interpretation of empirical solubility data. The model has to be self-consistent and tested against known solubility studies in order to predict radionuclide solubilities over the continuous distribution ranges of potential water compositions for performance assessment of the site. Solubility studies upper limits for radionuclide concentrations in natural waters. The

  4. Solubility of uranium and thorium from a healing earth in synthetic gut fluids: a case study for use in dose assessments.

    Science.gov (United States)

    Höllriegl, Vera; Li, Wei Bo; Leopold, Karsten; Gerstmann, Udo; Oeh, Uwe

    2010-11-01

    The aim of this case study was to estimate the bioaccessibility of uranium ((238)U) and thorium ((232)Th) from a healing earth by analysing the solubility of these radionuclides in synthetic gastric and intestinal fluids. An easy applicable in vitro test system was used to investigate the fractional mobilization of the soil contaminants being potentially available for absorption under human in vivo conditions. These findings provided the basis for a prospective dose assessment. The solubility experiments were performed using two different in vitro digestion methods. The concentrations of (238)U and (232)Th in the solutions extracted from the soil were measured by inductively coupled plasma mass spectrometry (ICP-MS). The dissolved fractions in the synthetic gastrointestinal fluid ranged in average from 10.3% to 13.8% for (238)U and from 0.3% to 1.6% for (232)Th, respectively, depending on the digestion method. Subsequently, the committed effective doses from intake of (238)U and (232)Th after ingestion of the healing earth during 1 year were evaluated for adult persons. Thereby ingestion dose coefficients calculated as a function of bioaccessibility were used. The dose assessments ranged between 4.3 × 10(-7)-1.9 × 10(-6) Sv y(-1) for (238)U and 5.6 × 10(-7)-3.3 × 10(-6) Sv y(-1) for (232)Th, respectively. On the basis of the assumptions and estimations made, the present work indicates a relatively low radiation risk due to (238)U and (232)Th after internal exposure of the healing earth.

  5. Visual evoked response changes following intrathecal injection of water-soluble contrast media: a possible method of assessing neurotoxicity and a comparison of metrizamide and iopamidol.

    Science.gov (United States)

    Broadbridge, A T; Bayliss, S G; Firth, R; Farrell, G

    1984-09-01

    An investigation was carried out to ascertain if there was a change in visual evoked responses following the intrathecal injection of water-soluble contrast media for myeloradiculography and if this change provided an indication of neurotoxicity as assessed by the onset of headache during a period of 20 h following the radiological examination. The patients were unselected and examined, when facilities for measuring the visual evoked response were available, immediately before and at 1 and 20 h after the examination. Control readings were carried out before, 1 h and 20 h after lumbar puncture in patients who did not have an injection of contrast medium. The first 25 patients in the series received metrizamide; when iopamidol became available a change to the newer medium was made and iopamidol was used on all subsequent patients. All the injections were carried out by the same radiologist and the patients were kept in hospital overnight and interviewed the next morning, avoiding a specific reference to headache unless the patient denied all symptoms. It was found that the latency of the visual evoked response was affected in some cases by the presence of contrast medium in the cerebrospinal fluid and that there was a correlation between the severity of headaches and the delay in the visual evoked response at the 20 h post-myelogram measurement, but not at 1 h after the examination. It would appear, therefore, that the visual evoked response measurement is a valid method of assessing, in the short term, the neurotoxicity of intrathecal water-soluble contrast media and that, on this evidence, iopamidol is less neurotoxic than metrizamide. We are not aware of any long-term complications resulting from the use of either contrast medium.

  6. DARPA Antibody Technology Program. Standardized Test Bed for Antibody Characterization: Characterization of an MS2 ScFv Antibody Produced by Illumina

    Science.gov (United States)

    2016-08-01

    ECBC-TR-1395 DARPA ANTIBODY TECHNOLOGY PROGRAM STANDARDIZED TEST BED FOR...Thompson James Carney RESEARCH AND TECHNOLOGY DIRECTORATE Candice Warner Melody Zacharko EXCET, INC. Springfield, VA 22151-2110...4. TITLE AND SUBTITLE DARPA Antibody Technology Program Standardized Test Bed for Antibody Characterization: Characterization of an MS2 ScFv

  7. Ligation-based assembly for constructing mouse synthetic scFv libraries by chain shuffling with in vivo-amplified VH and VL fragments.

    Science.gov (United States)

    Nishi, Michiru; Jian, Nan; Yamamoto, Keiko; Seto, Haruyo; Nishida, Yuichi; Tonoyama, Yasuhiro; Shimizu, Nobuyoshi; Nishi, Yoshisuke

    2014-10-01

    In vitro assembly of two or three PCR fragments using primers is a common method of constructing scFv fragments for display on the surface of phage. However, mismatch annealing often occurs during in this step, leading to cloning and display of incomplete Fab or scFv fragments. To overcome this limitation, we developed a ligation-based two-fragment assembly (LTFA) protocol that involved separately cloning VH and Vκ fragments into the high-copy-number plasmid pUC18. The VH and Vκ fragments had randomized complementarity-determining region 3 (CDR3) and were joined with a peptidyl linker composed of (G4S)3. Using this approach, complete sequences of scFv fragments were successfully constructed, and the sequencing of 83 scFv clones revealed that none of the sequences, including the linker region, contained deletions or mutations. In contrast, linker sequences generated using a conventional two-fragment PCR assembly (TFPA) protocol often contained sequence anomalies, including large truncations. Using the LTFA protocol, a final library size of 1.0×10(8)cfu was achieved. Examination of the amino acid profiles of the generated scFv fragments within the randomized regions introduced using degenerate codons did not detect any bias from that expected based on stochastic distribution. After several cycles of panning with this library, antigen-specific scFvs against two reference antigens, hen egg lysozyme and streptavidin were detected. In addition, scFvs with specificity against peptidyl antigens in the loop region of the Medaka ortholog of human C6orf89, which encodes a histone deacetylase enhancer that interacts with the bombesin receptor, were also obtained. The LTFA protocol developed here is robust and allows for the easy construction of integral scFv fragments compared with conventional TFPA. Utilizing LTFA, other CDRs can be readily combined. This approach also allows for the in vitro maturation of scFv fragments by separately introducing randomization in CDRs or

  8. Assessment of the radium-barium co-precipitation and its potential influence on the solubility of Ra in the near-field

    Energy Technology Data Exchange (ETDEWEB)

    Grandia, Fidel; Merino, Joan; Bruno, Jordi (Amphos XXI Consulting S.L., Barcelona (Spain))

    2008-08-15

    Radium 226 is one of the main contributors to radiological dose in some of the scenarios contemplated in the recent SR Can safety assessment. The relative contribution of the 226Ra dose is clearly dependent on the source term value for this radionuclide, which is directly connected to its solubility behaviour. Most of the source term calculations performed for this radionuclide pessimistically assume that its solubility is controlled by the individual solubility of RaSO{sub 4}(s), the most insoluble phase under near field conditions, while the abundant information from early radiochemical research, natural system studies and anthropogenic systems would indicate that Ra(II) is mainly associated to BaSO{sub 4}(s) precipitation. In this work we have investigated the extensive literature concerning the mechanisms and processes controlling the co-precipitation/solid solution formation behaviour of the Ra(II)/Ba(II) sulphate system. We have also established the necessary thermodynamic moles to model the solubility behaviour in the vicinity of the spent fuel system. Calculations using an ATM-104 fuel at 40 MWd/kg U show that barium and radium inventories per canister progressively grow with time after deposition, most of the barium is produced in the initial 500 years. In the unlikely event of a contact of sulphate-containing groundwaters with the fuel, Ba(II) will precipitate as BaSO{sub 4}(s). The production of 226Ra reaches its peak some 300,000 years after deposition. This substantial time gap indicates that most of the BaSO{sub 4}(s) will be present when and if radium is released from the fuel, even if some Ra(II) and Ba(II) will be released contemporaneously. Two potential scenarios have been addressed from the mechanistic point of view. In the event of a simultaneous release of Ra with Ba, the former will be readily incorporated into the precipitating BaSO{sub 4} to build a Ra Ba sulphate solid solution. All the existing evidence indicates, that in this case, the

  9. Assessment of the combined approach of N-alkylation and salt formation to enhance aqueous solubility of tertiary amines using bupivacaine as a model drug

    DEFF Research Database (Denmark)

    Nielsen, Anders Bach; Frydenvang, Karla Andrea; Liljefors, Tommy;

    2005-01-01

    Quaternary prodrug types of poorly water-soluble tertiary amines have been shown to exhibit significantly enhanced solubilities as compared to the parent amine. In the present study the combined effect of N-alkylation and salt formation to enhance aqueous solubility of tertiary amines have been...... tertiary amine (up to a factor of 3200 at pH 8). A moderate reduction in solubility with increasing length of the alkyl chain was observed for the iodide salts of the N-alkylated bupivacaine derivatives. In case of the N-methyl-bupivacaine derivative variation of the counterion had a significant impact...

  10. Generation and characterization of a human single-chain fragment variable (scFv antibody against cytosine deaminase from Yeast

    Directory of Open Access Journals (Sweden)

    Tombesi Marina

    2008-09-01

    Full Text Available Abstract Background The ability of cytosine deaminase (CD to convert the antifungal agent 5-fluorocytosine (5-FC into one of the most potent and largely used anticancer compound such as 5-fluorouracil (5-FU raised considerable interest in this enzyme to model gene or antibody – directed enzyme-prodrug therapy (GDEPT/ADEPT aiming to improve the therapeutic ratio (benefit versus toxic side-effects of cancer chemotherapy. The selection and characterization of a human monoclonal antibody in single chain fragment (scFv format represents a powerful reagent to allow in in vitro and in vivo detection of CD expression in GDEPT/ADEPT studies. Results An enzymatic active recombinant CD from yeast (yCD was expressed in E. coli system and used as antigen for biopanning approach of the large semi-synthetic ETH-2 antibody phage library. Several scFvs were isolated and specificity towards yCD was confirmed by Western blot and ELISA. Further, biochemical and functional investigations demonstrated that the binding of specific scFv with yCD did not interfere with the activity of the enzyme in converting 5-FC into 5-FU. Conclusion The construction of libraries of recombinant antibody fragments that are displayed on the surface of filamentous phage, and the selection of phage antibodies against target antigens, have become an important biotechnological tool in generating new monoclonal antibodies for research and clinical applications. The scFvH5 generated by this method is the first human antibody which is able to detect yCD in routinary laboratory techniques without interfering with its enzymatic function.

  11. Solubility assessment of 232Th from various types of soil in Malaysia using USP and DIN In Vitro digestion method

    Science.gov (United States)

    Rashid, Nur Shahidah Abdul; Perama, Yasmin Mohd Idris; Salih, Fitri Hakeem Mohd; Sarmani, Sukiman; Majid, Amran Ab.; Siong, Khoo Kok

    2016-11-01

    The overall results of the study showed that the concentrations of 232Th radionuclide using DIN digestion method during gastric phase are 0.0015 mg/kg - 0.0554 mg/kg and 0.0015 mg/kg - 0.0139 mg/kg during intestinal phase, respectively. As for USP digestion method during gastric phase are between 0.0877 mg/kg - 0.4964 mg/kg and 0.0207 mg/kg - 0.2291 mg/kg. The results from the measurements in various types of soils indicates some elevation of 232Th concentration in some types of soil compared to UNSCEAR reference values, in which may be a result from the impact of previous mining activity in the surrounding area and considered to be safe. In general, the results of 232Th concentrations from in vitro extraction technique is considered to be safe. By natural processes, thorium ingestion is getting transferred to living beings through different pathways and need to be monitored in order to assess possible hazards. Environmental studies are generally carried out to trace the pathway of radionuclides/radiotoxic elements to reach living organism. Environmental monitoring and meaningful interpretation of data from man-made pollution are more complicated without adequate knowledge about the natural abundance of radioactive elements in the environment.

  12. Soluble Human Epidermal Growth Factor Receptor 2 (sHER2 as a Potential Risk Assessment, Screening, and Diagnostic Biomarker of Lung Adenocarcinoma

    Directory of Open Access Journals (Sweden)

    Andre T. Baron

    2013-01-01

    Full Text Available Lung cancer is the leading cause of cancer-related death in the United States. Here, we evaluated the potential clinical utility of soluble human epidermal growth factor receptor 2 (sHER2 for the risk assessment, screening, and diagnosis of non-small cell lung cancer (NSCLC using an unmatched case-control study design. Serum sHER2 concentrations were measured by immunoassay in 244 primary NSCLC cases and 218 healthy controls. Wilcoxon rank-sum tests, logistic regression models, and receiver operating characteristic plots were used to assess whether sHER2 is associated with lung cancer. Median serum sHER2 concentrations are higher in patients with adenocarcinoma than squamous cell carcinoma regardless of gender, and sHER2 is a weak, independent biomarker of adenocarcinoma, but not of squamous cell carcinoma, adjusted for age and gender. The age-adjusted relative risk (odds of adenocarcinoma is 3.95 (95% CI: 1.22, 12.81 and 7.93 (95% CI: 2.26, 27.82 greater for women and men with high sHER2 concentrations (≥6.60 ng/mL vs. low sHER2 concentrations (≤1.85 ng/mL, respectively. When adjusted for each other, sHER2, age, and gender discern healthy controls from patients with primary adenocarcinomas of the lung with 85.9% accuracy. We conclude that even though serum sHER2 is not a strong, stand-alone discriminatory biomarker of adenocarcinoma, sHER2 may be a useful, independent covariate in multivariate risk assessment, screening, and diagnostic models of lung cancer.

  13. Assessment of the radium-barium co-precipitation and its potential influence on the solubility of Ra in the near-field

    Energy Technology Data Exchange (ETDEWEB)

    Grandia, Fidel; Merino, Joan; Bruno, Jordi (Amphos XXI Consulting S.L., Barcelona (Spain))

    2008-08-15

    Radium 226 is one of the main contributors to radiological dose in some of the scenarios contemplated in the recent SR Can safety assessment. The relative contribution of the 226Ra dose is clearly dependent on the source term value for this radionuclide, which is directly connected to its solubility behaviour. Most of the source term calculations performed for this radionuclide pessimistically assume that its solubility is controlled by the individual solubility of RaSO{sub 4}(s), the most insoluble phase under near field conditions, while the abundant information from early radiochemical research, natural system studies and anthropogenic systems would indicate that Ra(II) is mainly associated to BaSO{sub 4}(s) precipitation. In this work we have investigated the extensive literature concerning the mechanisms and processes controlling the co-precipitation/solid solution formation behaviour of the Ra(II)/Ba(II) sulphate system. We have also established the necessary thermodynamic moles to model the solubility behaviour in the vicinity of the spent fuel system. Calculations using an ATM-104 fuel at 40 MWd/kg U show that barium and radium inventories per canister progressively grow with time after deposition, most of the barium is produced in the initial 500 years. In the unlikely event of a contact of sulphate-containing groundwaters with the fuel, Ba(II) will precipitate as BaSO{sub 4}(s). The production of 226Ra reaches its peak some 300,000 years after deposition. This substantial time gap indicates that most of the BaSO{sub 4}(s) will be present when and if radium is released from the fuel, even if some Ra(II) and Ba(II) will be released contemporaneously. Two potential scenarios have been addressed from the mechanistic point of view. In the event of a simultaneous release of Ra with Ba, the former will be readily incorporated into the precipitating BaSO{sub 4} to build a Ra Ba sulphate solid solution. All the existing evidence indicates, that in this case, the

  14. Assessment of cellular estrogenic activity based on estrogen receptor-mediated reduction of soluble-form catechol-O-methyltransferase (COMT) expression in an ELISA-based system.

    Science.gov (United States)

    Ho, Philip Wing-Lok; Tse, Zero Ho-Man; Liu, Hui-Fang; Lu, Song; Ho, Jessica Wing-Man; Kung, Michelle Hiu-Wai; Ramsden, David Boyer; Ho, Shu-Leong

    2013-01-01

    Xenoestrogens are either natural or synthetic compounds that mimic the effects of endogenous estrogen. These compounds, such as bisphenol-A (BPA), and phthalates, are commonly found in plastic wares. Exposure to these compounds poses major risk to human health because of the potential to cause endocrine disruption. There is huge demand for a wide range of chemicals to be assessed for such potential for the sake of public health. Classical in vivo assays for endocrine disruption are comprehensive but time-consuming and require sacrifice of experimental animals. Simple preliminary in vitro screening assays can reduce the time and expense involved. We previously demonstrated that catechol-O-methyltransferase (COMT) is transcriptionally regulated by estrogen via estrogen receptor (ER). Therefore, detecting corresponding changes of COMT expression in estrogen-responsive cells may be a useful method to estimate estrogenic effects of various compounds. We developed a novel cell-based ELISA to evaluate cellular response to estrogenicity by reduction of soluble-COMT expression in ER-positive MCF-7 cells exposed to estrogenic compounds. In contrast to various existing methods that only detect bioactivity, this method elucidates direct physiological effect in a living cell in response to a compound. We validated our assay using three well-characterized estrogenic plasticizers - BPA, benzyl butyl phthalate (BBP), and di-n-butyl phthalate (DBP). Cells were exposed to either these plasticizers or 17β-estradiol (E2) in estrogen-depleted medium with or without an ER-antagonist, ICI 182,780, and COMT expression assayed. Exposure to each of these plasticizers (10(-9)-10(-7)M) dose-dependently reduced COMT expression (pvitro assays of similar sensitivity. To satisfy the demand for in vitro assays targeting different cellular components, a cell-based COMT assay provides useful initial screening to supplement the current assessments of xenoestrogens for potential estrogenic activity.

  15. Gas solubilities widespread applications

    CERN Document Server

    Gerrard, William

    1980-01-01

    Gas Solubilities: Widespread Applications discusses several topics concerning the various applications of gas solubilities. The first chapter of the book reviews Henr's law, while the second chapter covers the effect of temperature on gas solubility. The third chapter discusses the various gases used by Horiuti, and the following chapters evaluate the data on sulfur dioxide, chlorine data, and solubility data for hydrogen sulfide. Chapter 7 concerns itself with solubility of radon, thoron, and actinon. Chapter 8 tackles the solubilities of diborane and the gaseous hydrides of groups IV, V, and

  16. Dendritic cells transfected with scFv from Mab 7.B12 mimicking original antigen gp43 induces protection against experimental Paracoccidioidomycosis.

    Directory of Open Access Journals (Sweden)

    Karen S Ferreira

    Full Text Available Paracoccidioidomycosis (PCM, endemic in Latin America, is a progressive systemic mycosis caused by Paracoccidioides brasiliensis (P. brasiliensis, which primarily attacks lung tissue. Dendritic cells (DCs are able to initiate a response in naïve T cells, and they also participate in Th-cell education. Furthermore, these cells have been used for therapy in several disease models. Here we transfected DCs with a plasmid (pMAC/PS-scFv encoding a single chain variable fragment (scFv of an anti-Id antibody that is capable of mimicking gp43, the main antigenic component of P. brasiliensis. First, Balb/c mice were immunized subcutaneously with pMAC/PS-scFv and, after seven days, scFv protein was presented to the regional lymph nodes cells. Moreover, we showed that the DCs transfected with scFv were capable of efficiently activating proliferation of total lymph node cells and inducing a decrease in lung infection. Therefore, our results suggested that the use of scFv-transfected DCs may be a promising therapy in the paracoccidioidomycosis (PCM model.

  17. Dendritic cells transfected with scFv from Mab 7.B12 mimicking original antigen gp43 induces protection against experimental Paracoccidioidomycosis.

    Science.gov (United States)

    Ferreira, Karen S; Maranhão, Andrea Q; Garcia, Maria C C; Brígido, Marcelo M; Santos, Suelen S; Lopes, José D; Almeida, Sandro R

    2011-01-07

    Paracoccidioidomycosis (PCM), endemic in Latin America, is a progressive systemic mycosis caused by Paracoccidioides brasiliensis (P. brasiliensis), which primarily attacks lung tissue. Dendritic cells (DCs) are able to initiate a response in naïve T cells, and they also participate in Th-cell education. Furthermore, these cells have been used for therapy in several disease models. Here we transfected DCs with a plasmid (pMAC/PS-scFv) encoding a single chain variable fragment (scFv) of an anti-Id antibody that is capable of mimicking gp43, the main antigenic component of P. brasiliensis. First, Balb/c mice were immunized subcutaneously with pMAC/PS-scFv and, after seven days, scFv protein was presented to the regional lymph nodes cells. Moreover, we showed that the DCs transfected with scFv were capable of efficiently activating proliferation of total lymph node cells and inducing a decrease in lung infection. Therefore, our results suggested that the use of scFv-transfected DCs may be a promising therapy in the paracoccidioidomycosis (PCM) model.

  18. The change of the scFv into the Fab format improves the stability and in vivo toxin neutralization capacity of recombinant antibodies.

    Science.gov (United States)

    Quintero-Hernández, Veronica; Juárez-González, Victor R; Ortíz-León, Mauricio; Sánchez, Rosalba; Possani, Lourival D; Becerril, Baltazar

    2007-02-01

    The antigen-binding fragment (Fab) has been considered a more functionally stable version of recombinant antibodies than single chain antibody fragments (scFvs), however this intuitive consideration has not been sufficiently proven in vivo. This communication shows that three out of four specific scFvs against a scorpion toxin, with different affinities and stabilities, become neutralizing in vivo when expressed as Fabs, despite the fact that they are not neutralizing in the scFv format. A scFv fragment previously obtained from a neutralizing mouse antibody (BCF2) was used to produce three derived scFvs by directed evolution. Only one of them was neutralizing, however when expressed as Fab, all of them became neutralizing fragments in vivo. The initial scFvBCF2 (earlier used for directed evolution) was not neutralizing in the scFv format. After expressing it as Fab did not become a neutralizing fragment, but did reduce the intoxication symptoms of experimental mice. The stability of the four Fabs derived from their respective scFvs was improved when tested in the presence of guanidinium chloride. The in vitro stability of the Fab format has been shown earlier, but the physiological consequences of this stability are shown in this communication. The present results indicate that improved functional stability conferred by the Fab format can replace additional maturation steps, when the affinity and stability are close to the minimum necessary to be neutralizing.

  19. Pure Phase Solubility Limits: LANL

    Energy Technology Data Exchange (ETDEWEB)

    C. Stockman

    2001-01-26

    products, complex stability constants, and redox potentials for radionuclides in different oxidation states, form the underlying database to be used for those calculations. The potentially low solubilities of many radionuclides in natural waters constitute the first barrier for their migration from the repository into the environment. Evaluation of this effect requires a knowledge of the site-specific water chemistry and the expected spatial and temporal ranges of its variability. Quantitative determinations of radionuclide solubility in waters within the range of chemistry must be made. Speciation and molecular complexation must be ascertained to interpret and apply solubility results. The solubilities thus determined can be used to assess the effectiveness of solubility in limiting radionuclide migration. These solubilities can also be used to evaluate the effectiveness of other retardation processes expected to occur once dissolution of the source material and migration begin. Understanding the solubility behavior of radionuclides will assist in designing valuable sorption experiments that must be conducted below the solubility limit since only soluble species participate in surface reactions and sorption processes. The present strategy for radionuclide solubility tasks has been to provide a solubility model from bulk-experiments that attempt to bracket the estimate made for this Analysis and Modeling Report (AMR) of water conditions on site. The long-term goal must be to develop a thermodynamic database for solution speciation and solid-state determination as a prerequisite for transport calculations and interpretation of empirical solubility data. The model has to be self-consistent and tested against known solubility studies in order to predict radionuclide solubilities over the continuous distribution ranges of potential water compositions for performance assessment of the site. Solubility studies upper limits for radionuclide concentrations in natural waters. The

  20. Nonzero Solubility Rule

    Institute of Scientific and Technical Information of China (English)

    尉志武; 周蕊; 刘芸

    2002-01-01

    A solubility-related rule, nonzero solubility rule, is introduced in this paper. It is complementary to the existing rules such as the "like dissolves like" rule and can be understood on the basis of classical chemical thermodynamics.

  1. An assessment of the performance of the Monitor for AeRosols and GAses in ambient air (MARGA: a semi-continuous method for soluble compounds

    Directory of Open Access Journals (Sweden)

    I. C. Rumsey

    2013-09-01

    Full Text Available Ambient air monitoring as part of the US Environmental Protection Agency's (US EPA's Clean Air Status and Trends Network (CASTNet currently uses filter packs to measure weekly integrated concentrations. The US EPA is interested in supplementing CASTNet with semi-continuous monitoring systems at select sites to characterize atmospheric chemistry and deposition of nitrogen and sulfur compounds at higher time resolution than the filter pack. The Monitor for AeRosols and GAses in ambient air (MARGA measures water-soluble gases and aerosols at hourly temporal resolution. The performance of the MARGA was assessed under the US EPA Environmental Technology Verification (ETV program. The assessment was conducted in Research Triangle Park, North Carolina from 8 September–8 October 2010 and focused on gaseous SO2, HNO3 and NH3 and aerosol SO4−, NO3− and NH4+. Precision of the MARGA was evaluated by calculating the median absolute relative percent difference (MARPD between paired hourly results from duplicate MARGA units (MUs, with a performance goal of 2, SO42− and NH4+, with all three compounds passing the accuracy and precision goals by a significant margin. The performance of the MARGA in measuring NO3− could not be evaluated due to the different sampling efficiency of coarse NO3− by the MUs and the filter pack. Estimates of "fine" NO3− were calculated for the MUs and the filter pack. Using this and results from a previous study, it is concluded that if the MUs and the filter pack were sampling the same particle size, the MUs would have good agreement in terms of precision and accuracy. The MARGA performed moderately well in measuring HNO3 and NH3, though neither met the linear regression slope goals. However, recommendations for improving the measurement of HNO3 and NH3 are discussed. It is concluded that SO42−, SO2, NO3−, HNO3, NH4+ and NH3 concentrations can be measured with acceptable accuracy and precision when the MARGA is

  2. Assessment of cellular estrogenic activity based on estrogen receptor-mediated reduction of soluble-form catechol-O-methyltransferase (COMT expression in an ELISA-based system.

    Directory of Open Access Journals (Sweden)

    Philip Wing-Lok Ho

    Full Text Available Xenoestrogens are either natural or synthetic compounds that mimic the effects of endogenous estrogen. These compounds, such as bisphenol-A (BPA, and phthalates, are commonly found in plastic wares. Exposure to these compounds poses major risk to human health because of the potential to cause endocrine disruption. There is huge demand for a wide range of chemicals to be assessed for such potential for the sake of public health. Classical in vivo assays for endocrine disruption are comprehensive but time-consuming and require sacrifice of experimental animals. Simple preliminary in vitro screening assays can reduce the time and expense involved. We previously demonstrated that catechol-O-methyltransferase (COMT is transcriptionally regulated by estrogen via estrogen receptor (ER. Therefore, detecting corresponding changes of COMT expression in estrogen-responsive cells may be a useful method to estimate estrogenic effects of various compounds. We developed a novel cell-based ELISA to evaluate cellular response to estrogenicity by reduction of soluble-COMT expression in ER-positive MCF-7 cells exposed to estrogenic compounds. In contrast to various existing methods that only detect bioactivity, this method elucidates direct physiological effect in a living cell in response to a compound. We validated our assay using three well-characterized estrogenic plasticizers - BPA, benzyl butyl phthalate (BBP, and di-n-butyl phthalate (DBP. Cells were exposed to either these plasticizers or 17β-estradiol (E2 in estrogen-depleted medium with or without an ER-antagonist, ICI 182,780, and COMT expression assayed. Exposure to each of these plasticizers (10(-9-10(-7M dose-dependently reduced COMT expression (p<0.05, which was blocked by ICI 182,780. Reduction of COMT expression was readily detectable in cells exposed to picomolar level of E2, comparable to other in vitro assays of similar sensitivity. To satisfy the demand for in vitro assays targeting different

  3. Assessment of serum levels of soluble CD40L in Egyptian children and adolescents with type 1 diabetes mellitus: Relationship to microalbuminuria and glycemic control

    Directory of Open Access Journals (Sweden)

    Kotb Abbass Metwalley

    2013-01-01

    Full Text Available Context: Soluble CD40 ligand (sCD40L is known to be elevated in different clinical situations including hypercholesterolemia, acute coronary syndromes, and type 2 diabetes mellitus (T2DM, Data about the relationship between type 1 diabetes mellitus (T1DM and sCD40L is limited. In addition, the potential role ofsCD40Lin the pathogenesis of vascular complications in children and adolescents with T1DM is to be clarified. Hence, the study aimed at assessment of sCD40L levels in children and adolescents with T1DM and correlation of these levels with glycemic control and microalbuminuria. Settings and Design: Cross-sectional controlled study. Materials and Methods: The study was performed in the Pediatric Endocrinology and Diabetes Unit, Assuit University Children Hospital, Assiut, Egypt. It included 70 children and adolescents with T1DM (mean age 14. 76 ± 2.21 years. Cases were further subdivided into 43 cases with normoalbuminuria and 27 cases with microalbuminuria according to presence or absence or microalbuminuria in fresh urine samples. Twentyfive healthy subjects, age- and sex-matched were included as control group (mean age = 13.62 ± 2.11 years. Studied cases were subjected to medical history, clinical examination, and laboratory assessment of fasting blood glucose (FBG, lipid profile, glycosylated hemoglobin (HbA1c, and sCD40L were performed. Results: Mean HbA1c and sCD40L were significantly higher in diabetic children (n = 70 compared to control (n = 25 (P < 0.001 for each. Mean HbA1c and sCD40L levels were significantly higher in microalbuminuric cases (n = 27 compared to normoalbuminuric cases (n = 43 (P < 0.05 and <0.01, respectively.We also observed a significant positive correlation between sCD40L levels and the age, diabetes duration, HbA1c, and urinary albumin creatinine ratio. Conclusions: The high serum sCD40L levels in children and adolescents with T1DM particularly in those with microalbminuria and its positive correlation with

  4. CYCLODEXTRIN INCLUSION COMPLEX TO ENHANCE SOLUBILITY OF POORLY WATER SOLUBLE DRUGS: A REVIEW

    Directory of Open Access Journals (Sweden)

    V.B. Chaudhary * 1 and J. K. Patel 2

    2013-01-01

    Full Text Available Low solubility compounds show dissolution rate limited absorption and hence poor absorption, distribution and target organ delivery. Improvement of aqueous solubility in such a case is valuable goal to improve therapeutic efficacy. Complexation with CDs by different methods like physical mixing, melting, kneding, spray drying, freeze drying, co-evaporation has been reported to enhance the solubility, dissolution rate and bioavability of poorly water soluble drugs. The formation of inclusion complex can be confirmed by DSC, FTIR, XRD and SEM study. This review aims to assess the use of cyclodextrines as complexing agents to enhance the solubility of poorly soluble drugs and hence to resolve the many issues associated with developing and commercializing poorly water soluble drugs.

  5. Solubility database for TILA-99

    Energy Technology Data Exchange (ETDEWEB)

    Vuorinen, U.; Carlsson, T. [VTT Chemical Technology, Espoo (Finland); Kulmala, S.; Hakanen, M. [Helsinki Univ. (Finland). Lab. of Radiochemistry; Ahonen, L. [Geological Survey of Finland, Espoo (Finland)

    1998-11-01

    The safety assessment of spent fuel disposal requires solubility values for several elements estimated in Finnish disposal conditions. In Finland four sites (Haestholmen, Kivetty, Olkiluoto and Romuvaara) are investigated for the disposal of spent fuel. Haestholmen and OLkiluoto are onshore sites, while Kivetty and Romuvaara are inland sites. Based on groundwater analysis and classification according to salinity at the planned disposal depth mainly fresh groundwater is encountered at Kivetty and Romuvaara, while brackish and saline water-types are met at Haestholmen and Olkiluoto. Very saline, almost brine-type water ({approx}70 g/l) has been found in the deepest parts of the investigated bedrock at one of the sites (Olkiluoto). The reference waters and conditions were chosen according to the water-types. The considered reference conditions incorporated both the near- and far-field, and both oxidizing and reducing conditions were considered. In the reference conditions, the changes in solubilities were also estimated as caused by possible variations in the pH, carbonate content and redox conditions. Uranium, which is the main component of spent fuel is dealt with in a separate report presenting the solubility of uranium and spent fuel dissolution. In this work the solubilities of all the other elements of concern (Am, Cu, Nb, Np, Pa, Pd, Pu, Ra, Se, Sn, Tc, Zr, Cm, Ni, Sr, Th, C, Cl, Cs, Fe, Ho, I, and Sm) in the safety assessment are considered. Some discussion on the corrosion of the spent fuel canister is also presented. For the estimation of solubilities of the elements in question, literature data was collected that mainly comprised experimentally measured concentrations. The sources used were spent fuel experiments, concentrations measured in solubility measurements, natural concentrations and concentrations from natural analogue sites (especially Palmottu and Hyrkkoelae in Finland) as well as the concentrations measured at the Finnish investigation sites

  6. Soluble oil cutting fluid

    Energy Technology Data Exchange (ETDEWEB)

    Rawlinson, A.P.; White, J.

    1987-06-23

    A soluble oil, suitable when diluted with water, for use as a cutting fluid comprises an alkali or alkaline-earth metal alkyl benzene sulphonate, a fatty acid diethanolamide, a mixed alkanolamine borate, a polyisobutenesuccinimide and a major proportion of mineral oil. The soluble oil is relatively stable without the need for a conventional coupling agent and some soluble oil emulsions are bio-static even though conventional biocides are not included.

  7. Assessment of the Fusion Tags on Increasing Soluble Production of the Active TEV Protease Variant and Other Target Proteins in E. coli.

    Science.gov (United States)

    Yu, Xuelian; Sun, Jiaqi; Wang, Weiyu; Jiang, Li; Cheng, Beijiu; Fan, Jun

    2016-12-17

    In this study, five fusion tags affecting soluble production and cleavage activity of the tobacco etch virus (TEV) protease (TEVp) variant in Escherichia coli strains BL21 (DE3) and Rosetta™ (DE3) are investigated. Combination of the augmenting rare transfer RNAs (tRNAs) and the fused expressivity tag (N-terminal seven amino acid residues of E. coli translation initiation factor II) promotes the soluble TEVp partner expressed at relatively high level. Attachment of the maltose-binding protein (MBP) tag increases soluble expression of the protease released from the fusion protein in E. coli cells, but the incorporated TEVp recognition sequence slightly decreases expressivity of the fusion construct. Except for the green fluorescent protein, the attached expressivity tag shows less efficiency than the MBP tag in enhancing expression levels of the selected five target proteins in the Rosetta™ (DE3) cells under different induction conditions. Our results identified that high-level production of the functional target protein as the fusion partner in E. coli is combined with the intrinsic property of fusion tag, fusion protein stability, inherent folding of target protein, rare tRNA abundance, and the incorporated linker. Purified TEVp fusion constructs with the N-terminal expressivity tag, as well as the MBP partner, are the ideal alternatives for removing fusion tag.

  8. The Solubility of struvite

    DEFF Research Database (Denmark)

    Aage, H. K.; Andersen, Bertel Lohmann; Blom, A.

    1997-01-01

    The solubility of magnesium-amonium-phosphate (struvite) has been studied emloying the radioisotope 32P as tracer. The amount of sample in solution is determined by measuring the Cherenkov radiation due to the beta-particles emitted from this radionuclide. The thermodynamic solubility product...

  9. Chemiluminescent nitrogen detection (CLND) to measure kinetic aqueous solubility.

    Science.gov (United States)

    Kestranek, Aimee; Chervenak, Andrew; Longenberger, Justin; Placko, Steven

    2013-01-01

    Solubility is the dose-limiting property for in vitro studies, and therefore is a critical physicochemical property to measure in drug discovery. Solubility data can be used to guide lead optimization, troubleshoot erratic bioassay results, and identify potential downstream liabilities such as insufficient solubility for bioassays or oral bioavailability. Typically, early in vitro studies are performed using library compounds prepared as dimethylsulfoxide (DMSO) stock solutions, resulting in in vitro test solutions containing DMSO at low concentration (<5% v/v). Since DMSO can affect the apparent solubility, it is desirable to obtain solubility data under conditions mimicking the in vitro study. Kinetic solubility (from DMSO stock solutions) is often preferred over thermodynamic solubility (from dry powder) in early drug discovery. The protocols in this article describe a general procedure for assessing kinetic aqueous solubility of early drug discovery compounds using a miniaturized shake flask method with chemiluminescent nitrogen detection (CLND).

  10. Screening and identification of human ZnT8-specific single-chain variable fragment (scFv) from type 1 diabetes phage display library.

    Science.gov (United States)

    Wu, Qian; Wang, Xiaodong; Gu, Yong; Zhang, Xiao; Qin, Yao; Chen, Heng; Xu, Xinyu; Yang, Tao; Zhang, Mei

    2016-07-01

    Zinc transporter 8 (ZnT8) is a major autoantigen and a predictive marker in type 1 diabetes (T1D). To investigate ZnT8-specific antibodies, a phage display library from T1D was constructed and single-chain antibodies against ZnT8 were screened and identified. Human T1D single-chain variable fragment (scFv) phage display library consists of approximately 1×10(8) clones. After four rounds of bio-panning, seven unique clones were positive by phage ELISA. Among them, C27 and C22, which demonstrated the highest affinity to ZnT8, were expressed in Escherichia coli Top10F' and then purified by affinity chromatography. C27 and C22 specifically bound ZnT8 N/C fusion protein and ZnT8 C terminal dimer with one Arg325Trp mutation. The specificity to human islet cells of these scFvs were further confirmed by immunohistochemistry. In conclusion, we have successfully constructed a T1D phage display antibody library and identified two ZnT8-specific scFv clones, C27 and C22. These ZnT8-specific scFvs are potential agents in immunodiagnostic and immunotherapy of T1D.

  11. Delineation of BmSXP antibody V-gene usage from a lymphatic filariasis based immune scFv antibody library.

    Science.gov (United States)

    Rahumatullah, Anizah; Ahmad, Azimah; Noordin, Rahmah; Lim, Theam Soon

    2015-10-01

    Phage display technology is an important tool for antibody generation or selection. This study describes the development of a scFv library and the subsequent analysis of identified monoclonal antibodies against BmSXP, a recombinant antigen for lymphatic filariasis. The immune library was generated from blood of lymphatic filariasis infected individuals. A TA based intermediary cloning approach was used to increase cloning efficiency for the library construction process. A diverse immune scFv library of 10(8) was generated. Six unique monoclonal antibodies were identified from the 50 isolated clones against BmSXP. Analysis of the clones showed a bias for the IgHV3 and Vκ1 (45.5%) and IgHV2 and Vκ3 (27.3%) gene family. The most favored J segment for light chain is IgKJ1 (45.5%). The most favored D and J segment for heavy chain are IgHD6-13 (75%) and IgHJ3 (47.7%). The information may suggest a predisposition of certain V genes in antibody responses against lymphatic filariasis.

  12. Aptamers, antibody scFv, and antibody Fab' fragments: An overview and comparison of three of the most versatile biosensor biorecognition elements.

    Science.gov (United States)

    Crivianu-Gaita, Victor; Thompson, Michael

    2016-11-15

    The choice of biosensing elements is crucial for the development of the optimal biosensor. Three of the most versatile biosensing elements are antibody single-chain Fv fragments (scFv), antibody fragment-antigen binding (Fab') units, and aptamers. This article provides an overview of these three biorecognition elements with respects to their synthesis/engineering, various immobilization techniques, and examples of their use in biosensors. Furthermore, the final section of the review compares and contrasts their characteristics (time/cost of development, ease and variability of immobilization, affinity, stability) illustrating their advantages and disadvantages. Overall, scFv fragments are found to display the highest customizability (i.e. addition of functional groups, immobilizing peptides, etc.) due to recombinant synthesis techniques. If time and cost are an issue in the development of the biosensor, Fab' fragments should be chosen as they are relatively cheap and can be developed quickly from whole antibodies (several days). However, if there are sufficient funds and time is not a factor, aptamers should be utilized as they display the greatest affinity towards their target analytes and are extremely stable (excellent biosensor regenerability).

  13. Assessing the impact of polymers on the pH-induced precipitation behavior of poorly water soluble compounds using synchrotron wide angle X-ray scattering.

    Science.gov (United States)

    Hsieh, Yi-Ling; Box, Karl; Taylor, Lynne S

    2014-09-01

    The aim of this study was to investigate the pH-induced precipitation behavior of four ionizable compounds (papaverine, dipyridamole, glyburide, and warfarin) in the absence and presence of polymers. Polymers selected included nonionic, anionic, and cationic polymers. Precipitates were analyzed immediately after formation using high-energy radiation wide-angle X-ray scattering analysis and polarized light microscopy. Papaverine immediately crystallized to the original solid-state form upon creation of a highly supersaturated solution and polymers were unable to prevent crystallization. Dipyridamole also crystallized rapidly, forming a metastable polymorph that was stabilized by several of the cellulosic polymers. For glyburide and warfarin, although the compounds readily crystallized in the absence of the polymers, several of the polymers were able to prevent crystallization for more than 6 h. In general, measurements of solution concentration immediately following precipitation corroborated the solid-state analysis results, with the solution phase for the noncrystalline precipitates having a concentration considerably higher than that of the equilibrium solubility value, whereas for the crystalline precipitates, values were closer to the equilibrium solubility. Thus, precipitation to a noncrystalline solid was found to be promoted by the presence of some polymers, resulting in the formation of a supersaturated solution.

  14. Assessment of a five-layer laminate technique to measure the saturation solubility of drug in pressure-sensitive adhesive film.

    Science.gov (United States)

    Reismann, Simone; Lee, Geoffrey

    2012-07-01

    A five-layer laminate technique is used to determine the saturation solubility of a drug in a thin polymer film, c(p)(s), of pressure-sensitive adhesive (PSA) used to prepare transdermal patches. A drug-loaded donor polymer film is attached via a separating membrane to an initially drug-free acceptor polymer film. Diffusion of drug occurs into the acceptor up to saturation solubility equilibrium. This systematic study of the technique using the drug tamsulosin and the PSA Duro Tak 87-4098 was a kinetic analysis of the diffusion process. It was found that the technique gives an equilibrium value for c(p)(s) in a PSA polymer film in the presence of crystalline phase of the drug in the donor. A highly permeable Perthese-separating membrane caused overshoot in the acceptor, most likely induced by initial supersaturation of the donor. Change to a less-permeable ethylene-vinyl-acetate-separating membrane avoided overshoot, but gave a prolonged time, >300 days, to equilibrium. Preloading the acceptor accelerated the equilibration process to approximately 50 days with the Perthese. Suitable experimental conditions are identified that, if performed correctly, allow the technique to give an equilibrium value for c(p)(s).

  15. Soluble CD163

    DEFF Research Database (Denmark)

    Parkner, Tina; Sørensen, L P; Nielsen, A R;

    2012-01-01

    Soluble CD163 (sCD163) was recently identified as a strong risk marker for developing type 2 diabetes. We hypothesised that sCD163 independently associates with insulin resistance.......Soluble CD163 (sCD163) was recently identified as a strong risk marker for developing type 2 diabetes. We hypothesised that sCD163 independently associates with insulin resistance....

  16. AW-101 entrained solids - Solubility versus temperature

    Energy Technology Data Exchange (ETDEWEB)

    GJ Lumetta; RC Lettau; GF Piepel

    2000-03-31

    This report describes the results of a test conducted by Battelle to assess the solubility of the solids entrained in the diluted AW-101 low-activity waste (LAW) sample. BNFL requested Battelle to dilute the AW-1-1 sample using de-ionized water to mimic expected plant operating conditions. BNFL further requested Battelle to assess the solubility of the solids present in the diluted AW-101 sample versus temperature conditions of 30, 40, and 50 C. BNFL requested these tests to assess the composition of the LAW supernatant and solids versus expected plant-operating conditions. The work was conducted according to test plan BNFL-TP-29953-7, Rev. 0, Determination of the Solubility of LAW Entrained Solids. The test went according to plan, with no deviations from the test plan.

  17. Targeting the active site of the placental isozyme of alkaline phosphatase by phage-displayed scFv antibodies selected by a specific uncompetitive inhibitor

    Directory of Open Access Journals (Sweden)

    Kala Mrinalini

    2005-12-01

    Full Text Available Abstract Background The isozymes of alkaline phosphatase, the tissue non-specific, intestinal and placental, have similar properties and a high degree of identity. The placental isozyme (PLAP is an oncofetal antigen expressed in several malignancies including choriocarcinoma, seminoma and ovarian carcinoma. We had earlier attempted to isolate PLAP-specific scFv from a synthetic human immunoglobulin library but were unable to do so, presumably because of the similarity between the isozymes. In this work, we have employed a PLAP-specific uncompetitive inhibitor, L-Phe-Gly-Gly, to select isozyme specific scFvs. An uncompetitive inhibitor binds to the enzyme in the presence of substrate and stabilizes the enzyme-substrate complex. Several uncompetitive inhibitors have varying degrees of isozyme specificity for human alkaline phosphatase isozymes. A specific uncompetitive inhibitor would be able to unmask conformational differences between the otherwise very similar molecules. Also, such inhibitors would be directed to regions at/close to the active site of the enzyme. In this work, the library was first incubated with PLAP and the bound clones then eluted by incubation with L-Phe-Gly-Gly along with the substrate, para-nitro phenyl phosphate (pNPP. The scFvs were then studied with regard to the biochemical modulation of their binding, isozyme specificity and effect on enzyme activity. Results Of 13 clones studied initially, the binding of 9 was inhibited by L-Phe-Gly-Gly (with pNPP and 2 clones were inhibited by pNPP alone. Two clones had absolute and 2 clones had partial specificity to PLAP. Two clones were cross-reactive with only one other isozyme. Three scFv clones, having an accessible His6-tag, were purified and studied for their modulation of enzyme activity. All the three scFvs inhibited PLAP activity with the kinetics of competitive inhibition. Cell ELISA could demonstrate binding of the specific scFvs to the cell surface expressed PLAP

  18. Stability engineering of anti-EGFR scFv antibodies by rational design of a lambda-to-kappa swap of the VL framework using a structure-guided approach.

    Science.gov (United States)

    Lehmann, Andreas; Wixted, Josephine H F; Shapovalov, Maxim V; Roder, Heinrich; Dunbrack, Roland L; Robinson, Matthew K

    2015-01-01

    Phage-display technology facilitates rapid selection of antigen-specific single-chain variable fragment (scFv) antibodies from large recombinant libraries. ScFv antibodies, composed of a VH and VL domain, are readily engineered into multimeric formats for the development of diagnostics and targeted therapies. However, the recombinant nature of the selection strategy can result in VH and VL domains with sub-optimal biophysical properties, such as reduced thermodynamic stability and enhanced aggregation propensity, which lead to poor production and limited application. We found that the C10 anti-epidermal growth factor receptor (EGFR) scFv, and its affinity mutant, P2224, exhibit weak production from E. coli. Interestingly, these scFv contain a fusion of lambda3 and lambda1 V-region (LV3 and LV1) genes, most likely the result of a PCR aberration during library construction. To enhance the biophysical properties of these scFvs, we utilized a structure-based approach to replace and redesign the pre-existing framework of the VL domain to one that best pairs with the existing VH. We describe a method to exchange lambda sequences with a more stable kappa3 framework (KV3) within the VL domain that incorporates the original lambda DE-loop. The resulting scFvs, C10KV3_LV1DE and P2224KV3_LV1DE, are more thermodynamically stable and easier to produce from bacterial culture. Additionally, C10KV3_LV1DE and P2224KV3_LV1DE retain binding affinity to EGFR, suggesting that such a dramatic framework swap does not significantly affect scFv binding. We provide here a novel strategy for redesigning the light chain of problematic scFvs to enhance their stability and therapeutic applicability.

  19. Assessment of the E-Selectin rs5361 (561A>C Polymorphism and Soluble Protein Concentration in Acute Coronary Syndrome: Association with Circulating Levels

    Directory of Open Access Journals (Sweden)

    Elena Sandoval-Pinto

    2014-01-01

    Full Text Available Introduction. The acute coronary syndrome (ACS is a complex disease where genetic and environmental factors are involved. E-selectin gene is a candidate for ACS progression due to its contribution in the inflammatory process and endothelial function. The rs5361 (561A>C polymorphism in the E-selectin gene has been linked to changes in gene expression, affinity for its receptor, and plasmatic levels; therefore it is associated with an increased risk of cardiovascular disease. The aim of this study was to determine the association of the rs5361 polymorphism with ACS and to measure serum levels of soluble E-selectin (sE-selectin. Materials and Methods. 283 ACS patients and 205 healthy subjects (HS from Western Mexico were included. The polymerase chain reaction-restriction fragment length polymorphism was used to determine the rs5361 polymorphism. The sE-selectin levels were measured by enzyme-linked immunosorbent assay. Results. Neither genotype nor allele frequencies of the rs5361 polymorphism showed statistical differences between groups. The sE-selectin levels were significantly higher in ACS patients compared to HS (54.58 versus 40.41 ng/ml, P=0.02. The C allele had no effect on sE-selectin levels. Conclusions. The rs5361 E-selectin gene polymorphism is not a susceptibility marker for ACS in Western Mexico population. However, sE-selectin may be a biological marker of ACS.

  20. Recognition of Vipera ammodytes meridionalis neurotoxin vipoxin and its components using phage-displayed scFv and polyclonal antivenom sera.

    Science.gov (United States)

    Stoyanova, Vishnya; Aleksandrov, Radoslav; Lukarska, Maria; Duhalov, Deyan; Atanasov, Vasil; Petrova, Svetla

    2012-10-01

    Vipoxin is a potent postsynaptic heterodimeric neurotoxin isolated from the venom of the Bulgarian snake Vipera ammodytes meridionalis, whose snakebites cause different and strongly manifested pathophysiological effects (neurotoxic, hemolytic, anticoagulant, convulsant, hypotensive, hyperglycemic etc.). The neutralization of snake toxins calls for extensive research through the application of different approaches: antibodies, non-immunologic inhibitors, natural products derived from plants and animals, as well as synthetic drugs. In this study, we applied naive Tomlinson I + J (Cambridge, UK) libraries to obtain recombinant human scFv antibodies against the vipoxin's two subunits--basic and toxic phospholipase A₂ (PLA₂) and acidic, non-toxic component. We found that 33 of more than hundred tested clones were positive and recognized vipoxin and its subunits. Enriched scFv-phage samples (1.2 × 10⁹ pfu/ml) were analyzed for their binding (ELISA) and enzyme-inhibiting abilities. Single chain Fv-phage clones--D₁₂, E₃, F₆, D₁₀ and G₅ exhihest binding affinity for the toxic component. Clones A₁, D₁₂ and C₁₂ recognized preferentially vipoxin's acidic component. Clones E₃, G₅ and H₄ inhibited the enzymatic activity of both vipoxin and its purified and separated toxic subunit to the highest extent. Six of the selected clones (E₃, G₅, H₄, C₁₂, D₁₀ and A₁₁) inhibited direct hemolytic activity of vipoxin and its pure PLA₂ subunit. The obtained specific scFv antibodies will be used for epitope mapping studies required to shed light on the role of the phospholipase A₂ activity for the vipoxin toxicity and its effective neutralization.

  1. New cut-off values for ferritin and soluble transferrin receptor for the assessment of iron deficiency in children in a high infection pressure area

    NARCIS (Netherlands)

    K.S. Phiri; J.C.J. Calis; A. Siyasiya; I. Bates; B. Brabin; M. Boele van Hensbroek

    2009-01-01

    Background: Due to the potential risk of iron supplementation in iron replete children, it is important to properly identify children who may require iron supplementation. However, assessment of the iron status has proven to be difficult, especially in children living in areas with high infection pr

  2. Assessment of in situ immobilization of Lead (Pb) and Arsenic (As) in contaminated soils with phosphate and iron: solubility and bioaccessibility

    NARCIS (Netherlands)

    Cui, Y.S.; Du, X.; Weng, L.P.; Riemsdijk, van W.H.

    2010-01-01

    The effect of in situ immobilization of lead (Pb) and arsenic (As) in soil with respectively phosphate and iron is well recognized. However, studies on combined Pb and As-contaminated soil are fewer, and assessment of the effectiveness of the immobilization on mobility and bioaccessibility is also n

  3. A randomized trial to assess anti-HIV activity in female genital tract secretions and soluble mucosal immunity following application of 1% tenofovir gel.

    Directory of Open Access Journals (Sweden)

    Marla J Keller

    Full Text Available BACKGROUND: Preclinical and early phase clinical microbicide studies have not consistently predicted the outcome of efficacy trials. To address this gap, candidate biomarkers of microbicide pharmacodynamics and safety were evaluated in a double-blind, placebo-controlled trial of tenofovir gel, the first microbicide to demonstrate significant protection against HIV acquisition. METHODS: 30 women were randomized to apply a single daily dose of tenofovir or placebo gel for 14 consecutive days. Anti-HIV activity was measured in cervicovaginal lavage (CVL on Days 0, 3, 7, 14 and 21 by luciferase assay as a surrogate marker of pharmacodynamics. Endogenous activity against E. coli and HSV-2 and concentrations of immune mediators were quantified in CVL as candidate biomarkers of safety. Tenofovir levels were measured in CVL and blood. RESULTS: A significant increase in anti-HIV activity was detected in CVL from women who applied tenofovir gel compared to their endogenous anti-HIV activity in genital tract secretions on Day 0 and compared to activity in CVL from women in the placebo group. The activity correlated significantly with CVL concentration of tenofovir (r = 0.6, p<0.001 and fit a sigmoid E(max pharmacodynamic model. Anti-HIV activity in CVL from women who applied tenofovir persisted when virus was introduced in semen, whereas endogenous anti-HIV activity decreased. Tenofovir did not trigger an inflammatory response or induce sustained loss in endogenous antimicrobial activity or immune mediators. CONCLUSIONS: Tenofovir gel had no deleterious impact on soluble mucosal immunity. The increased anti-HIV activity in CVL, which persisted in the presence of semen and correlated with tenofovir concentration, is consistent with the efficacy observed in a recent clinical trial. These results promote quantified CVL anti-HIV activity as a surrogate of tissue pharmacodynamics and as a potential biomarker of adherence to product. This simple, feasible and

  4. Sequence Analysis of ScFv Gene for Anti-alpha-toxin%两种抗α毒素单链抗体基因的序列分析

    Institute of Scientific and Technical Information of China (English)

    赵宝华; 许崇波

    2001-01-01

    应用RT-PCR技术,从两株分泌具有中和活性的抗A型产气荚膜梭菌α毒素单克隆抗体(McAb)的杂交瘤细胞株2E3和1A8中,分别扩增出抗体VH和VL基因,用Linker(Gly4Ser)3基因,将VH和VL基因连接成ScFv基因2E3-ScFv和1A8-ScFv,并将其克隆至pGEM-T载体中.经核苷酸序列分析证实,VH和VL基因以及Linker基因拼接正确,2E3-ScFv基因全长为729bp,经计算机分析,VH和VL基因均为新发现的基因序列,符合功能性重排的鼠抗体可变区基因特征.2E3-ScFv的VH和VL基因分别属于鼠免疫球蛋白重链Ⅱ(B)和轻链kⅢ家簇;而1A8-ScFv的VH和VL基因分别属于鼠免疫球蛋白重链Ⅱ(A)和轻链κⅥ家簇.%The VH and VL genes were amplified from two hybridoma cell lines producing mouse McAb against alpha-txoin of Clostridium perfringens type A by RT-PCR. The VH and VL genes were connected through a flexible Linker (Gly4Ser)3,and the VH-Linker-VL(ScFv) fusion gene was cloned into a clone vector pGEM-T. The 2E3-ScFv and 1A8-ScFv gene were sequenced and analyzed by computer. The ScFv genes consist of 726 bp and 729 bp respectively.Both VH and VL genes were functionally rearranged mouse immunoglobulin variable region genes and appeared to be new genes. According to Kabat classed method,the VH gene segment and VL gene segment of 2E3-ScFv belong to the mouse Ig heavy chain subgroup Ⅱ (B) and к chain subgroup Ⅲ respectively,but the VH gene segment and VL gene segment of 1A8 -ScFv belong to the mouse Ig heavy chain subgroup Ⅱ (A) and к chain subgroup Ⅵ respectively.

  5. 人源抗创伤弧菌溶血素蛋白单链抗体的筛选及初步鉴定%Screening and initial identification of human anti-vibrio vulnificus haemolysin ScFv

    Institute of Scientific and Technical Information of China (English)

    谢学渊; 付凯飞; 王欲晓; 吴成林; 周丽君

    2016-01-01

    目的 从天然单链(scFv)大容量噬菌体抗体库中筛选特异性抗创伤弧菌溶血素蛋白(vibrio vulnificus haemolysin,VVH)的scFv并进行初步鉴定.方法 以表达纯化后的VVH为靶抗原,采用酸洗脱的方法从天然大容量噬菌体抗体库中筛选人源抗VVH噬菌体单链抗体,并将噬菌体抗体的上清梯度稀释后感染HB2151菌,经异丙基-β-D-硫代半乳糖苷(IPTG)诱导表达后获得抗VVH蛋白可溶性单链抗体,ELISA检测其与抗原结合活性,DNA序列测定鉴定抗体序列.结果 经过4轮筛选,共筛选到22株可以与VVH结合的噬菌体阳性克隆,其中8株获得可溶性表达,DNA序列分析表明获得3株可变区基因型不同的单链抗体.结论 利用大容量噬菌体抗体库筛选技术获得抗创伤弧菌溶血素蛋白的可溶性抗体,为创伤弧菌感染的治疗奠定了基础.%Objective To screen specific human antibodies against Vibrio vulnificus hemolysin (VVH ) from natural single stranded large capacity phage antibody library and to perform initial identification of the antibodies,for the treatment of vibrio vulnificus infection.Methods The specific antibody against purified VVH was screened from large natural phage antibody library by 4 rounds of " adsorption-elution-amplification" screening process.Soluble ScFvs were prepared through infecting E coli.HB2151 and inducing expression with IPTG.The antigen binding activity and DNA sequence of the antibodies against VVH were identified by ELISA and DNA fingerprint analysis.Results After 4 rounds of panning,22 positive clones with specific binding ability to VVH were obtained,of which 8 obtained soluble expressions.DNA sequence analyses showed that the variable region genes of the clones belonged to different subgroups of immunoglobulin gene family.Conclusions The acquirement of human anti-VVH ScFv from large phage antibody library has laid a good foundation for the treatment of vibrio vulnificus infection.

  6. Toxicity assessment using Lactuca sativa L. bioassay of the metal(loid)s As, Cu, Mn, Pb and Zn in soluble-in-water saturated soil extracts from an abandoned mining site

    Energy Technology Data Exchange (ETDEWEB)

    Bagur-Gonzalez, Maria Gracia [Univ. of Granada, Faculty of Sciences, Dept. of Analytical Chemistry, Granada (Spain); Univ. of Granada-CSIC, Inst. Andaluz de Ciencias de la Tierra, Faculty of Sciences, Granada (Spain); Estepa-Molina, Carmen [Univ. of Granada, Faculty of Sciences, Dept. of Mineralogy and Petrology, Granada (Spain); Martin-Peinado, Francisco [Univ. of Granada, Faculty of Sciences, Dept. of Soil Science, Granada (Spain); Morales-Ruano, Salvador [Univ. of Granada-CSIC, Inst. Andaluz de Ciencias de la Tierra, Faculty of Sciences, Granada (Spain); Univ. of Granada, Faculty of Sciences, Dept. of Mineralogy and Petrology, Granada (Spain)

    2011-02-15

    We used the different soluble-in-water concentrations of As, Cu, Mn, Pb and Zn from contaminated soils in an abandoned mining area (anthropogenic origin) to assess the phytotoxicity of the abandoned site using the results obtained with a Lactuca sativa L. bioassay. Material and methods The study has been carried out on potentially polluted samples from the Rodalquilar mining district (southern Spain). The area was sampled according to the different metallurgical treatments for gold extraction used in each one: dynamic cyanidation and heap leaching. The saturation extracts were obtained by filtering each saturated paste with a vacuum-extraction pump, in which measurements of metal(loid) concentrations, pH and electrical conductivity were made. The variables evaluated in the bioassay, defined as toxicity indices ranging from -1 (maximum phytotoxicity) to >0 (hormesis), were seed germination (SG) and root elongation (RE) of lettuce seeds. Results and discussion In areas with a low degree of contamination, the most sensitive toxicity index is RE, whereas in highly contaminated areas, both RE and SG are good estimators of soil toxicity. According to these results, samples from the western area showed moderate to low toxicity, which was closely related to water-soluble As concentrations. Samples from the eastern area had a high degree of toxicity in 40% of the soils. Conclusions The comparison of the two indices (SG and RE) defined using the L. sativa L. bioassay indicates that, for areas with a low degree of contamination, the most sensitive toxicity index is RE, whereas in highly contaminated areas, both RE and SG are good estimators of soil phytotoxicity. Unsupervised pattern recognition methods such as HCA and PCA enabled us to conclude that the low/moderate phytotoxicity of the soils is related to the extraction process used for the recovery of gold (mainly dynamic cyanidation in tanks located in the eastern area) and to the As and Pb contents. (orig.)

  7. Soluble and insoluble fiber (image)

    Science.gov (United States)

    Dietary fiber is the part of food that is not affected by the digestive process in the body. ... of the stool. There are two types of dietary fiber, soluble and insoluble. Soluble fiber retains water and ...

  8. Uranyl Oxalate Solubility

    Energy Technology Data Exchange (ETDEWEB)

    Leturcq, G.; Costenoble, S.; Grandjean, S. [CEA Marcoule DEN/DRCP/SCPS/LCA - BP17171 - 30207 Bagnols sur Ceze cedex (France)

    2008-07-01

    The solubility of uranyl oxalate was determined at ambient temperature by precipitation in oxalic-nitric solutions, using an initial uranyl concentration of 0.1 mol/L. Oxalic concentration varied from 0.075 to 0.3 mol/L while nitric concentration ranged between 0.75 and 3 mol/L. Dissolution tests, using complementary oxalic-nitric media, were carried out for 550 hours in order to study the kinetic to reach thermodynamic equilibrium. Similar solubility values were reached by dissolution and precipitation. Using the results, it was possible to draw the solubility surface versus oxalic and nitric concentrations and to determine both the apparent solubility constant of UO{sub 2}C{sub 2}O{sub 4}, 3H{sub 2}O (Ks) and the apparent formation constant of the first uranyl-oxalate complex UO{sub 2}C{sub 2}O{sub 4} (log {beta}1), for ionic strengths varying between 1 and 3 mol/L. Ks and log {beta}1 values were found to vary from 1.9 10{sup -8} to 9.2 10{sup -9} and from 5.95 to 6.06, respectively, when ionic strength varied from 1 to 3 mol/L. A second model may fit our data obtained at an ionic strength of 3 mol/L suggesting as reported by Moskvin et al. (1959) that no complexes are formed for [H{sup +}] at 3 M. The Ks value would then be 1.3 10{sup -8}. (authors)

  9. Microscopic views of drug solubility

    OpenAIRE

    Bondesson, Laban

    2006-01-01

    The development of computational models for predicting drug solubility has increased drastically during the last decades. Nevertheless these models still have diffculties to estimate the aqueous solubility as accurate as desired. In this thesis di erent aspects that are known to have a large impact on the aqueous solubility of a molecule have been studied in detail using various theoretical methods with intension to provide microscopic view on drug solubility. The rst aspect studied is the hy...

  10. Soluble porphyrin polymers

    Science.gov (United States)

    Gust, Jr., John Devens; Liddell, Paul Anthony

    2015-07-07

    Porphyrin polymers of Structure 1, where n is an integer (e.g., 1, 2, 3, 4, 5, or greater) ##STR00001## are synthesized by the method shown in FIGS. 2A and 2B. The porphyrin polymers of Structure 1 are soluble in organic solvents such as 2-MeTHF and the like, and can be synthesized in bulk (i.e., in processes other than electropolymerization). These porphyrin polymers have long excited state lifetimes, making the material suitable as an organic semiconductor for organic electronic devices including transistors and memories, as well as solar cells, sensors, light-emitting devices, and other opto-electronic devices.

  11. Novel electrosprayed nanospherules for enhanced aqueous solubility and oral bioavailability of poorly water-soluble fenofibrate

    Science.gov (United States)

    Yousaf, Abid Mehmood; Mustapha, Omer; Kim, Dong Wuk; Kim, Dong Shik; Kim, Kyeong Soo; Jin, Sung Giu; Yong, Chul Soon; Youn, Yu Seok; Oh, Yu-Kyoung; Kim, Jong Oh; Choi, Han-Gon

    2016-01-01

    Purpose The purpose of the present research was to develop a novel electrosprayed nanospherule providing the most optimized aqueous solubility and oral bioavailability for poorly water-soluble fenofibrate. Methods Numerous fenofibrate-loaded electrosprayed nanospherules were prepared with polyvinylpyrrolidone (PVP) and Labrafil® M 2125 as carriers using the electrospray technique, and the effect of the carriers on drug solubility and solvation was assessed. The solid state characterization of an optimized formulation was conducted by scanning electron microscopy, powder X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopic analyses. Oral bioavailability in rats was also evaluated for the formulation of an optimized nanospherule in comparison with free drug and a conventional fenofibrate-loaded solid dispersion. Results All of the electrosprayed nanospherule formulations had remarkably enhanced aqueous solubility and dissolution compared with free drug. Moreover, Labrafil M 2125, a surfactant, had a positive influence on the solubility and dissolution of the drug in the electrosprayed nanospherule. Increases were observed as the PVP/drug ratio increased to 4:1, but higher ratios gave no significant increases. In particular, an electrosprayed nanospherule composed of fenofibrate, PVP, and Labrafil M 2125 at the weight ratio of 1:4:0.5 resulted in a particle size of amorphous state. It demonstrated the highest solubility (32.51±2.41 μg/mL), an excellent dissolution (~85% in 10 minutes), and an oral bioavailability ~2.5-fold better than that of the free drug. It showed similar oral bioavailability compared to the conventional solid dispersion. Conclusion Electrosprayed nanospherules, which provide improved solubility and bioavailability, are promising drug delivery tools for oral administration of poorly water-soluble fenofibrate. PMID:26834471

  12. Determination of radionuclide solubility limits to be used in SR 97. Uncertainties associated to calculated solubilities

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, J.; Cera, E.; Duro, L.; Jordana, S. [QuantiSci S.L., Barcelona (Spain); Pablo, J. de [DEQ-UPC, Barcelona (Spain); Savage, D. [QuantiSci Ltd., Henley-on-Thames (United Kingdom)

    1997-12-01

    The thermochemical behaviour of 24 critical radionuclides for the forthcoming SR97 PA exercise is discussed. The available databases are reviewed and updated with new data and an extended database for aqueous and solid species of the radionuclides of interest is proposed. We have calculated solubility limits for the radionuclides of interest under different groundwater compositions. A sensitivity analysis of the calculated solubilities with the composition of the groundwater is presented. Besides selecting the most likely solubility limiting phases, in this work we have used coprecipitation approaches in order to calculate more realistic solubility limits for minor radionuclides, such as Ra, Am and Cm. The comparison between the calculated solubilities and the concentrations measured in relevant natural systems (NA) and in spent fuel leaching experiments helps to assess the validity of the methodology used and to derive source term concentrations for the radionuclides studied. The uncertainties associated to the solubilities of the main radionuclides involved in the spent nuclear fuel have also been discussed in this work. The variability of the groundwater chemistry; redox conditions and temperature of the system have been considered the main factors affecting the solubilities. In this case, a sensitivity analysis has been performed in order to study solubility changes as a function of these parameters. The uncertainties have been calculated by including the values found in a major extent in typical granitic groundwaters. The results obtained from this analysis indicate that there are some radionuclides which are not affected by these parameters, i.e. Ag, Cm, Ho, Nb, Ni, Np, Pu, Se, Sm, Sn, Sr, Tc and U

  13. SITE-94. Radionuclide solubilities for SITE-94

    Energy Technology Data Exchange (ETDEWEB)

    Arthur, R.; Apted, M. [QuantiSci, Denver, CO (United States)

    1996-12-01

    In this report, solubility constraints are evaluated on radioelement source-term concentrations supporting the SITE-94 performance assessment. Solubility models are based on heterogeneous-equilibrium, mass- and charge-balance constraints incorporated into the EQ3/6 geochemical software package, which is used to calculate the aqueous speciation behavior and solubilities of U, Th, Pu, Np, Am, Ni, Ra, Se, Sn, Sr, Tc and Zr in site groundwaters and near-field solutions. The chemical evolution of the near field is approximated using EQ3/6 in terms of limiting conditions at equilibrium, or steady state, in three closed systems representing fully saturated bentonite, Fe{sup o} corrosion products of the canister, and spent fuel. The calculations consider both low-temperature (15 deg C) and high-temperature (80 deg C) conditions in the near field, and the existence of either reducing or strongly oxidizing conditions in each of the bentonite, canister, and spent-fuel barriers. Heterogeneities in site characteristics are evaluated through consideration of a range of initial groundwaters and their interactions with engineered barriers. Aqueous speciation models for many radioelements are constrained by thermodynamic data that are estimated with varying degrees of accuracy. An important question, however, is how accurate do these models need to be for purposes of estimating source-term concentrations? For example, it is unrealistic to expect a high degree of accuracy in speciation models if such models predict solubilities that are below the analytical detection limit for a given radioelement. From a practical standpoint, such models are irrelevant if calculated solubilities cannot be tested by direct comparison to experimental data. In the absence of models that are both accurate and relevant for conditions of interest, the detection limit could define a pragmatic upper limit on radioelement solubility 56 refs, 25 tabs, 10 figs

  14. Molecular characterization of a single-chain antibody variable fragment (scFv) specific for PspA from Streptococcus pneumoniae.

    Science.gov (United States)

    Jang, ShinA; Kim, Gyuhee; Oh, Jihye; Lee, Seungyeop; Kim, Dongho; Kim, Kook-Han; Kim, Yong Ho; Rhee, Dong-Kwon; Lee, Sangho

    2017-01-01

    Streptococcus pneumoniae is a major infectious agent responsible for pneumonia, otitis media, sepsis and meningitis. Pneumococcal surface protein A (PspA) is a well-characterized virulence factor localized on the surface and a target for vaccine development. In this study, we screened a single-chain antibody variable fragment (scFv) using phage display from a human synthetic library to select a clone 2B11. Affinity (Kd) of 2B11 was measured to be 5 nM using biolayer interferometry. 2B11 exhibited a dose-dependent recognition of recombinant PspA with no cross-reactivity towards pneumococcal antigens. The epitope on PspA was defined to residues 231-242 by mutational analysis. Molecular docking analysis supported the experimentally determined epitope, suggesting that the helix spanning residues 231-242 can bind to 2B11 with residues in the CDR-H3 (complementarity determining region 3 in the heavy chain) actively participating in the molecular contacts. Comparison of 2B11 with a commercial PspA antibody revealed that 2B11 exhibited a better specificity towards recombinant PspA antigen. 2B11 was capable of detecting endogenous PspA from pneumococcal lysates with affinity similar to that of the commercial antibody. Our study provides a molecular tool for biosensors detecting pneumococcal diseases.

  15. Recovery of active anti TNF-α ScFv through matrix-assisted refolding of bacterial inclusion bodies using CIM monolithic support.

    Science.gov (United States)

    Sushma, Krishnan; Bilgimol, Chuvappumkal Joseph; Vijayalakshmi, Mookambeswaran A; Satheeshkumar, Padikara Kutty

    2012-04-01

    Anti TNF-α molecules are important as therapeutic agents for many of the autoimmune diseases in chronic stage. Here we report the expression and purification of a recombinant single chain variable fragment (ScFv) specific to TNF-α from inclusion bodies. In contrast to the conventional on column refolding using the soft gel supports, an efficient methodology using monolithic matrix has been employed. Nickel (II) coupled to convective interaction media (CIM) support was utilized for this purpose with 6M guanidine hydrochloride (GuHCl) as the chaotropic agent. The protein purified after solubilization and refolding proved to be biologically active with an IC₅₀ value of 15 μg. To the best of our knowledge, this is the first report showing the application of methacrylate based chromatographic supports for matrix-assisted refolding and purification of Escherichia coli inclusion bodies. The results are promising to elaborate the methodology further to exploit the potential positive features of monoliths in protein refolding science.

  16. Solubility of C60 in solvent mixtures.

    Science.gov (United States)

    Kulkarni, Pradnya P; Jafvert, Chad T

    2008-02-01

    The potential large-scale production of fullerene C60 and its widespread use in consumer products may translate into occupational and public exposure and in long-term environmental exposure. To assess the risk and fate of C60 in the environment, it is important to understand its solvate formation in common industrial solvents as the solvates may affect various properties of C60 including reactivity and toxicity, particularly when solvates occur in C60 clusters. In this study, the solubility measurements in mixed solvent system can provide useful information about solvate formation. The solubility of C60 was measured in pure toluene, tetrahydrofuran, ethanol, and acetonitrile to be 3000, 11, 1.4, and 0.04 mg/L, respectively. Additionally, the solubility of C60 was measured in mixtures of toluene-acetonitrile, toluene-ethanol, toluene-tetrahydrofuran, and acetonitrile-tetrahydrofuran. The solubility data were modeled with some accuracy using Wohl's equation. The estimated crystal energy term for C60 in tetrahydrofuran was different than that in the other solvents, indicating that the C60 solid phase in equilibrium with tetrahydrofuran solution may be a solvated crystal.

  17. Water-soluble cavitands - synthesis, solubilities and binding properties

    NARCIS (Netherlands)

    Middel, Oskar; Verboom, Willem; Reinhoudt, David N.

    2002-01-01

    Water-soluble cavitand receptors have been obtained by the introduction of ionizable groups (5, 21-28, 39) and neutral hydrophilic tetraethylene glycol based dendritic wedges (19, 20). The synthesis of these cavitands and a study of their water solubilities and binding properties toward neutral orga

  18. Actinide (III) solubility in WIPP Brine: data summary and recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Borkowski, Marian; Lucchini, Jean-Francois; Richmann, Michael K.; Reed, Donald T.

    2009-09-01

    The solubility of actinides in the +3 oxidation state is an important input into the Waste Isolation Pilot Plant (WIPP) performance assessment (PA) models that calculate potential actinide release from the WIPP repository. In this context, the solubility of neodymium(III) was determined as a function of pH, carbonate concentration, and WIPP brine composition. Additionally, we conducted a literature review on the solubility of +3 actinides under WIPP-related conditions. Neodymium(III) was used as a redox-invariant analog for the +3 oxidation state of americium and plutonium, which is the oxidation state that accounts for over 90% of the potential release from the WIPP through the dissolved brine release (DBR) mechanism, based on current WIPP performance assessment assumptions. These solubility data extend past studies to brine compositions that are more WIPP-relevant and cover a broader range of experimental conditions than past studies.

  19. DNA immunization combined with scFv phage display identifies antagonistic GCGR specific antibodies and reveals new epitopes on the small extracellular loops.

    Science.gov (United States)

    van der Woning, Bas; De Boeck, Gitte; Blanchetot, Christophe; Bobkov, Vladimir; Klarenbeek, Alex; Saunders, Michael; Waelbroeck, Magali; Laeremans, Toon; Steyaert, Jan; Hultberg, Anna; De Haard, Hans

    2016-01-01

    The identification of functional monoclonal antibodies directed against G-protein coupled receptors (GPCRs) is challenging because of the membrane-embedded topology of these molecules. Here, we report the successful combination of llama DNA immunization with scFv-phage display and selections using virus-like particles (VLP) and the recombinant extracellular domain of the GPCR glucagon receptor (GCGR), resulting in glucagon receptor-specific antagonistic antibodies. By immunizing outbred llamas with plasmid DNA containing the human GCGR gene, we sought to provoke their immune system, which generated a high IgG1 response. Phage selections on VLPs allowed the identification of mAbs against the extracellular loop regions (ECL) of GCGR, in addition to multiple VH families interacting with the extracellular domain (ECD) of GCGR. Identifying mAbs binding to the ECL regions of GCGR is challenging because the large ECD covers the small ECLs in the energetically most favorable 'closed conformation' of GCGR. Comparison of Fab with scFv-phage display demonstrated that the multivalent nature of scFv display is essential for the identification of GCGR specific clones by selections on VLPs because of avid interaction. Ten different VH families that bound 5 different epitopes on the ECD of GCGR were derived from only 2 DNA-immunized llamas. Seven VH families demonstrated interference with glucagon-mediated cAMP increase. This combination of technologies proved applicable in identifying multiple functional binders in the class B GPCR context, suggesting it is a robust approach for tackling difficult membrane proteins.

  20. Isolation and characterisation of a human-like antibody fragment (scFv that inactivates VEEV in vitro and in vivo.

    Directory of Open Access Journals (Sweden)

    Torsten Rülker

    Full Text Available Venezuelan equine encephalitis virus (VEEV belongs to the Alphavirus genus and several species of this family are pathogenic to humans. The viruses are classified as potential agents of biological warfare and terrorism and sensitive detection as well as effective prophylaxis and antiviral therapies are required.In this work, we describe the isolation of the anti-VEEV single chain Fragment variable (scFv, ToR67-3B4, from a non-human primate (NHP antibody gene library. We report its recloning into the bivalent scFv-Fc format and further immunological and biochemical characterisation.The scFv-Fc ToR67-3B4 recognised viable as well as formalin and ß-propionolactone (ß-Pl inactivated virus particles and could be applied for immunoblot analysis of VEEV proteins and immuno-histochemistry of VEEV infected cells. It detected specifically the viral E1 envelope protein of VEEV but did not react with reduced viral glycoprotein preparations suggesting that recognition depends upon conformational epitopes. The recombinant antibody was able to detect multiple VEEV subtypes and displayed only marginal cross-reactivity to other Alphavirus species except for EEEV. In addition, the scFv-Fc fusion described here might be of therapeutic use since it successfully inactivated VEEV in a murine disease model. When the recombinant antibody was administered 6 hours post challenge, 80% to 100% of mice survived lethal VEEV IA/B or IE infection. Forty to sixty percent of mice survived when scFv-Fc ToR67-3B4 was applied 6 hours post challenge with VEEV subtypes II and former IIIA. In combination with E2-neutralising antibodies the NHP antibody isolated here could significantly improve passive protection as well as generic therapy of VEE.

  1. 抗胃癌单链抗体免疫毒素重组质粒的构建及表达%Construction of Anti-carcinoma ScFv Immunotoxin Recombina nt Plasmid and its Expression

    Institute of Scientific and Technical Information of China (English)

    韩梅; 戴寿芝; 靳更林; 寿成超

    2001-01-01

    Objectives To construct the recombinant plasm id that expresses anti-carcinoma ScF v immunotoxin.Methods By recombinant technique,the cDNA coding the anti-carcinoma ScFv antibody was recombined with the cDNA coding Pseudomonas areuginosa exotoxin to form the recombinanr plasmid.The E Coli.BL-21,after bein g transformed with the recombinant plasmid,was induced by IPTG to express the an ti-carcinoma ScFv immumotoxin.Results The recombinantion of pla smid was identifide to be correct by endonuclease restriction analysis and the B L-21 that contain the recombinant plasmid abundantly expressed the immunotoxin b y IPTG inducement.The size of the expressed protein is similar to that anticipat ed in MW. Conclusions The recombinant plasmid that can express the anti -carcinoma ScFv immunotoxin is successfully obtained.%目的 构建能表达抗胃癌单链抗体免疫毒素的重组质粒并进行表达。方法 应用基因工程方法,将抗胃癌的单链抗体基因与绿脓杆菌外毒素基因进行重组,得到的重组质粒转化大肠杆菌BL-21 ,鉴定后的阳性克隆经IPTG诱导表达。结果 重组质粒经酶切鉴定正确,IPTG诱导后可看到明显的表达带,分子大小与预计值相符。结论 得到了能表达抗胃癌单链抗体免疫毒素的重组质粒。

  2. Assessing water salinity along River Limón and Caño San Miguel irrigation paleochannel (Maracaibo, Venezuela) as affected by the balance of soluble salts in alluvium soils

    Science.gov (United States)

    Rodriguez, Raquel; Moreno, Juan; Hermosilla, Daphne; Gascó, Antonio

    2013-04-01

    The saline degradation of soils that are irrigated with brackish water is worrisome increasing worldwide, and it may further affect the salinity of fresh water in those streams flowing across. The problem that is caused by an increasing concentration of salts that are more soluble than gypsum depends on the quality of irrigation water, climatic aridity, and drainage limitations. All these conditions meet in the alluvium soils of River Limón basin that are crossed by Caño San Miguel irrigation paleochannel. River Limón's regulation by closing Manuelote and Tulé artificial reservoirs has diminished the input of water and sediments from flooding events, which exerted dilutive effects in the past. In addition, the balance of soluble salts in these soils has also registered further net accumulation during those extremely dry years happened before 2006, because the great dilution contribution of ombrogenic dammed water coming from rain has not been enough to compensate salts concentration generated by water evapotranspiration in those irrigated soils of the middle basin, particularly in the absence of superficial runoff and deep drainage. Considering those semi-arid climate conditions prevailing in the area (annual precipitation = 710 mm; potential evapotransporation = 2361 mm), it resulted that water analyses in River Limón showed a ten-fold increased maximum annual salinity concentration (March) along the stream; that is, an electric conductivity (Ce) of 0.37 dS•m-1 (at 25 °C) at Puente Carrasquero pumping station, where water for crop irrigation is subtracted, turns to 34.60 dS•m-1 (at 25 °C) at its base level in Puerto Mara, where it discharges to Lake Maracaibo. In addition, the quality of irrigation water from Caño San Miguel, which aggregates to those coming from River Limón at the pumping station located in Carrasquero just before running through the alluvium of this water stream, resulted pretty irregular. In short, it spanned form C1 to C4 soil

  3. Construction and identification of anti-ENR phage display scFv libraries%抗恩诺沙星噬菌体单链抗体库的构建及鉴定

    Institute of Scientific and Technical Information of China (English)

    温凯; 沈建忠; 孟辉; 吴聪明; 王战辉; 张素霞

    2011-01-01

    本研究以兽药恩诺沙星为对象,构建噬菌体抗体库,为低成本、快速制备目的抗体提供新的途径.以恩诺沙星-鸡卵清蛋白(ENR-OVA)为免疫原对Balb/c小鼠进行免疫,取其脾细胞提取总RNA,并分别扩增全套抗体轻、重链基因,通过重叠延伸PCR技术,以编码柔性多肽(Gly3Ser)4的基因为接头,将轻重链基因组装为完整的scFv基因,将之克隆入pCANTAB5E载体,转化大肠杆菌XL1-Blue,以辅助噬菌体M13KO7对其进行超感染,构建噬菌体抗体库并进行富集、筛选和鉴定;构建了库容量约为2.2×106的抗恩诺沙星噬菌体单链抗体库,并筛选出26株阳性克隆,为表达单链抗体、建立免疫检测方法奠定基础.%This study focuses on construction and identification of immunized phage display library from splenocytes of hyperimmunized BALB/C mice for screening and isolation of scFv fragment against ENR, an alternative method to produce antibodies for veterinary drug residues detection. The total RNA was isolated from splenocytes of a BALB/C mouse hyperimmunized with the Enrofloxacin conjugated to chicken OVA. Variable light and heavy domains of the immunoglobulin genes were amplified by PCR and assembled to produce full-length single-chain Fv(scFV) by overlap extension PCR using a linker primer containing flexible polypeptide-(Gly3Ser)4. The scFv DNA fragment was ligated into phagemid vector pCANTAB5E and electroporated into E. coli XL1-Blue cells. The transformed cells were rescued by M13KO7 helper phage and phage libraries were constructed. The size of antibody libraries is 2.2 × 106. Following the construction of phage display scFv libraries, the recombinant phage displaying scFv were enriched and identified. There are 26 clones against ENR generated in this study.

  4. Novel electrosprayed nanospherules for enhanced aqueous solubility and oral bioavailability of poorly water-soluble fenofibrate

    Directory of Open Access Journals (Sweden)

    Yousaf AM

    2016-01-01

    Full Text Available Abid Mehmood Yousaf,1,2 Omer Mustapha,1 Dong Wuk Kim,1 Dong Shik Kim,1 Kyeong Soo Kim,1 Sung Giu Jin,1 Chul Soon Yong,3 Yu Seok Youn,4 Yu-Kyoung Oh,5 Jong Oh Kim,3 Han-Gon Choi1 1College of Pharmacy and Institute of Pharmaceutical Science and Technology, Hanyang University, Ansan, Gyeonggi, South Korea; 2Faculty of Pharmacy, University of Central Punjab, Johar, Lahore, Pakistan; 3College of Pharmacy, Yeungnam University, Gyongsan, North Gyeongsang, 4School of Pharmacy, Sungkyunkwan University, Suwon, Gyeonggi, 5College of Pharmacy, Seoul National University, Seoul, South Korea Purpose: The purpose of the present research was to develop a novel electrosprayed nanospherule providing the most optimized aqueous solubility and oral bioavailability for poorly water-soluble fenofibrate.Methods: Numerous fenofibrate-loaded electrosprayed nanospherules were prepared with polyvinylpyrrolidone (PVP and Labrafil® M 2125 as carriers using the electrospray technique, and the effect of the carriers on drug solubility and solvation was assessed. The solid state characterization of an optimized formulation was conducted by scanning electron microscopy, powder X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopic analyses. Oral bioavailability in rats was also evaluated for the formulation of an optimized nanospherule in comparison with free drug and a conventional fenofibrate-loaded solid dispersion.Results: All of the electrosprayed nanospherule formulations had remarkably enhanced aqueous solubility and dissolution compared with free drug. Moreover, Labrafil M 2125, a surfactant, had a positive influence on the solubility and dissolution of the drug in the electrosprayed nanospherule. Increases were observed as the PVP/drug ratio increased to 4:1, but higher ratios gave no significant increases. In particular, an electrosprayed nanospherule composed of fenofibrate, PVP, and Labrafil M 2125 at the weight ratio of 1

  5. Solid solubility of germanium in silver

    Energy Technology Data Exchange (ETDEWEB)

    Kazemi, Hamed [Laboratory of Mechanical Metallurgy, Ecole Polytechnique Federale de Lausanne, EPFL, CH-1015 Lausanne (Switzerland); Weber, Ludger, E-mail: ludger.weber@epfl.ch [Laboratory of Mechanical Metallurgy, Ecole Polytechnique Federale de Lausanne, EPFL, CH-1015 Lausanne (Switzerland)

    2012-09-20

    Highlights: Black-Right-Pointing-Pointer The solvus line in the binary Ag-Ge system has been assessed based on measurements of electrical resistivity and specific gravity. Black-Right-Pointing-Pointer The two measurement techniques yield close agreement. Black-Right-Pointing-Pointer The data found in this contribution indicate lower solid solubility than in previous assessments. Black-Right-Pointing-Pointer Redlich-Kister parameters have been evaluated to describe the solvus line. - Abstract: The solid solubility of germanium in silver has been measured in the temperature range of 520 K to 913 K via measurements of density and of electrical conductivity of two near-eutectic Ag-Ge alloys. The atomic fraction of germanium in solid solution varied between 0.014 and 0.089 over the mentioned range of temperature and an extrapolated maximum solubility of 0.093 at the eutectic temperature of 924 K is found. For samples with spheroidized Ge-particles before the equilibrium heat treatments at low temperature for 24 or 48 h, thermodynamic equilibrium was supposedly not achieved at temperatures below 723 K. Much longer heat treatments (tens of days) on the significantly finer as-cast microstructure allowed to reach equilibrium probably down to 600 K. Independently of whether thermodynamic equilibrium was reached or not the electrical conductivity and the density measurements yielded good agreement typically within a few tenth of percent of atomic Ge-concentration in solid solution in {alpha}-Ag for a given temperature. The results are close to, yet consistently slightly lower than, the values given by Owen and Rowland on which the current assessment of the solvus in the Ag-Ge binary is based. More recent results by Filipponi and co-workers are clearly not in agreement with the data presented here.

  6. SOLUBILITY ENHANCEMENT OF POORLY WATER SOLUBLE DRUGS BY SOLID DISPERSIO

    Directory of Open Access Journals (Sweden)

    Amita Verm

    2012-01-01

    Full Text Available Solid dispersions have been employed to enhance the dissolution rates of poorly water-soluble drugs. Many approaches have been investigated for the preparation of solid dispersions. This paper reports the various solubility enhancement strategies in solid dispersion. The approaches described are fusion (melting, solvent evaporation, lyophilization (freeze drying, melt agglomeration process, extruding method, spray drying technology, use of surfactant, electro static spinning method and super critical fluid technology. This paper also highlights the potential applications and limitations of theseapproaches in solid dispersions.

  7. Aqueous solubility, dispersibility and toxicity of biodiesels

    Energy Technology Data Exchange (ETDEWEB)

    Hollebone, B.P.; Fieldhouse, B.; Lumley, T.C.; Landriault, M. [Environment Canada, Ottawa, ON (Canada). ; Doe, K.; Jackman, P. [Environment Canada, Moncton, NB (Canada). Toxicology Laboratory, Environmental Science Centre

    2007-07-01

    The renewed interest in the use of biological fuels can be attributed to that fact that feedstocks for fatty-acid ester biodiesels are renewable and can be reclaimed from waste. Although there are significant benefits to using biodiesels, their increased use leaves potential for accidental release to the environment. Therefore, their environmental behaviours and impacts must be evaluated along with the risk associated with their use. Biodiesel fuels may be made from soy oil, canola oil, reclaimed restaurant grease, fish oil and animal fat. The toxicological fate of biofuel depends on the variability of its chemical composition. This study provided an initial assessment of the aqueous fate and effects of biodiesel from a broad range of commonly available feedstocks and their blends with petroleum diesels. The study focused primarily on the fate and impact of these fuels in fresh-water. The use of chemical dispersion as a countermeasure for saltwater was also investigated. The exposure of aquatic ecosystems to biodiesels and petroleum diesel occurs via the transfer of material from the non-aqueous phase liquid (NAPL) into the aqueous phase, as both soluble and dispersed components. The aqueous solubilities of the fuels were determined from the equilibrium water-accommodated fraction concentrations. The acute toxicities of many biodiesels were reported for 3 test species used by Environment Canada for toxicological evaluation, namely rainbow trout, the water flea and a luminescent bacterium. This study also evaluated the natural potential for dispersion of the fuels in the water column in both low and high-energy wave conditions. Chemical dispersion as a potential countermeasure for biodiesel spills was also evaluated using solubility testing, acute toxicity testing, and dispersibility testing. It was shown that biodiesels have much different fates and impacts from petroleum diesels. The compounds partitioning into the water column are also very different for each

  8. The Solubility Rules: Why Are All Acetates Soluble?

    Science.gov (United States)

    van der Sluys, William G.

    2001-01-01

    According to the solubility rules presented in many introductory chemistry texts, all (or most) acetate salts are soluble in aqueous solution. The thermodynamic factors that contribute to the solubility of acetates are compared with those of other slightly basic anions. In particular, the hydration enthalpy of acetate is calculated using the Born-Haber approach, from lattice energies, heats of solution, and the hydration energies of several cations. The hydration enthalpy of acetate (-375 kJ/mol) is similar to that of chloride ({355 kJ/mol), nitrite ({383 kJ/mol), and nitrate ({370 kJ/mol), which are all considerably less exothermic than fluoride ({497 kJ/mol). This was somewhat unexpected, since hydration enthalpies generally correlate well with the acid-base properties of an ion, and acetate is more basic than fluoride. Factors influencing the solubility and acid-base properties of acetates, such as the electron donating and hydrophobic nature of the methyl group, are discussed in light of the thermodynamic data.

  9. Preliminary considerations concerning actinide solubilities

    Energy Technology Data Exchange (ETDEWEB)

    Newton, T.W.; Bayhurst, B.P.; Daniels, W.R.; Erdal, B.R.; Ogard, A.E.

    1980-01-01

    Work at the Los Alamos Scientific Laboratory on the fundamental solution chemistry of the actinides has thus far been confined to preliminary considerations of the problems involved in developing an understanding of the precipitation and dissolution behavior of actinide compounds under environmental conditions. Attempts have been made to calculate solubility as a function of Eh and pH using the appropriate thermodynamic data; results have been presented in terms of contour maps showing lines of constant solubility as a function of Eh and pH. Possible methods of control of the redox potential of rock-groundwater systems by the use of Eh buffers (redox couples) is presented.

  10. Atmospheric Deposition of Soluble Organic Nitrogen due to Biomass Burning

    Science.gov (United States)

    Ito, A.; Lin, G.; Penner, J. E.

    2014-12-01

    Atmospheric deposition of reactive nitrogen (N) species from large fires may contribute to enrichment of nutrients in aquatic ecosystems. Here we use an atmospheric chemistry transport model to investigate the supply of soluble organic nitrogen (ON) from open biomass burning to the ocean. The model results show that the annual deposition rate of soluble ON to the oceans is increased globally by 13% with the increase being particularly notable over the coastal water downwind from the source regions. The estimated deposition of soluble ON due to haze events from the secondary formation is more than half of that from the primary sources. We examine the secondary formation of particulate C-N compounds (e.g., imidazole) from the reactions of glyoxal and methylglyoxal with atmospheric ammonium in wet aerosols and upon cloud evaporation. These ON sources result in a significant contribution to the open ocean, suggesting that atmospheric processing in aqueous phase may have a large effect. We compare the soluble ON concentration in aerosols with and without open biomass burning as a case study in Singapore. The model results demonstrate that the soluble ON concentration in aerosols is episodically enriched during the fire events, compared to the without smoke simulations. However, the model results show that the daily soluble ON concentration can be also enhanced in the without smoke simulations during the same period, compared to the monthly averages. This indicates that care should be taken when using in-situ observations to constrain the soluble ON source strength from biomass burning. More accurate quantification of the soluble ON burdens with no smoke sources is therefore needed to assess the effect of biomass burning on bioavailable ON input to the oceans.

  11. Solubility limits on radionuclide dissolution

    Energy Technology Data Exchange (ETDEWEB)

    Kerrisk, J.F.

    1984-12-31

    This paper examines the effects of solubility in limiting dissolution rates of a number of important radionuclides from spent fuel and high-level waste. Two simple dissolution models were used for calculations that would be characteristics of a Yucca Mountain repository. A saturation-limited dissolution model, in which the water flowing through the repository is assumed to be saturated with each waste element, is very conservative in that it overestimates dissolution rates. A diffusion-limited dissolution model, in which element-dissolution rates are limited by diffusion of waste elements into water flowing past the waste, is more realistic, but it is subject to some uncertainty at this time. Dissolution rates of some elements (Pu, Am, Sn, Th, Zr, Sm) are always limited by solubility. Dissolution rates of other elements (Cs, Tc, Np, Sr, C, I) are never solubility limited; their release would be limited by dissolution of the bulk waste form. Still other elements (U, Cm, Ni, Ra) show solubility-limited dissolution under some conditions. 9 references, 3 tables.

  12. CO₂-H₂O mixtures in the geologic sequestration of CO₂. I. Assessment and calculation of mutual solubilities from 12 to 100 degrees C and up to 600 bar

    Energy Technology Data Exchange (ETDEWEB)

    Spycher, Nicolas; Pruess, Karsten; Ennis-King, Jonathan

    2002-07-29

    Evaluating the feasibility of CO₂ geologic sequestration requires the use of pressure-temperature-composition (P-T-X) data for mixtures of CO₂ and H₂O at moderate pressures and temperatures (typically below 500 bar and below 100°C). For this purpose, published experimental P-T-X data in this temperature and pressure range are reviewed. These data cover the two-phase region where a CO₂-rich phase (generally gas) and an H₂O-rich liquid coexist and are reported as the mutual solubilities of H₂O and CO₂ in the two coexisting phases. For the most part, mutual solubilities reported from various sources are in good agreement. The mixing behavior of H₂O in the compressed gas phase is highly nonideal. A noniterative procedure is presented to calculate the composition of the compressed CO₂ and liquid H₂O phases at equilibrium, based on equating chemical potentials and using the Redlich-Kwong equation of state to express departure from ideal behavior. The procedure is an extension of that used by King et al. (1992), covering a broader range of temperatures and experimental data than those authors, and is readily expandable to a nonideal liquid phase. The calculation method and formulation are kept as simple as possible to avoid degrading the performance of numerical models of water-CO₂ flows for which they are intended. The method is implemented in a computer routine, and inverse modeling is used to determine, simultaneously, new Redlich-Kwong parameters for the H₂O-CO₂ mixture, as well as aqueous solubility constants for gaseous and liquid CO₂ as a function of temperature. In doing so, mutual solubilities of H₂O from 12 to 100°C and CO₂ from 15 to 110°C and up to 600 bar are generally reproduced within a few percent of experimental values. Fugacity coefficients of pure CO₂ are reproduced mostly within one percent of published reference data.

  13. Solubility of sparingly soluble drug derivatives of anthranilic acid.

    Science.gov (United States)

    Domańska, Urszula; Pobudkowska, Aneta; Pelczarska, Aleksandra

    2011-03-24

    This work is a continuation of our systematic study of the solubility of pharmaceuticals (Pharms). All substances here are derivatives of anthranilic acid, and have an anti-inflammatory direction of action (niflumic acid, flufenamic acid, and diclofenac sodium). The basic thermal properties of pure Pharms, i.e., melting and glass-transition temperatures as well as the enthalpy of melting, have been measured with the differential scanning microcalorimetry technique (DSC). Molar volumes have been calculated with the Barton group contribution method. The equilibrium mole fraction solubilities of three pharmaceuticals were measured in a range of temperatures from 285 to 355 K in three important solvents for Pharm investigations: water, ethanol, and 1-octanol using a dynamic method and spectroscopic UV-vis method. The experimental solubility data have been correlated by means of the commonly known G(E) equation: the NRTL, with the assumption that the systems studied here have revealed simple eutectic mixtures. pK(a) precise measurement values have been investigated with the Bates-Schwarzenbach spectrophotometric method.

  14. Soluble-oil cutting fluid

    Energy Technology Data Exchange (ETDEWEB)

    Rawlinson, A.P.; Whitby, R.D.; White, J.

    1989-04-11

    A composition for the preparation of a soluble oil for use in a cutting fluid comprises a mineral oil and, as an emuslifier, an effective amount of a sulfonate of a branched polymer of a C/sub 3/ to C/sub 5/ olefin. Preferably the polyolefin chain of the sulphonate has an average molecular weight in the range 275 to 560 and the polyolefin is polyisobutene. A soluble oil can be prepared from the above composition by the addition of a conventional corrosion inhibitor and diluted with water to make a cutting fluid. Advantages of the novel emulsifier are that it is resistant to breakdown by micro-organisms and does not require the addition of a coupling agent.

  15. Soluble Precursor Route to Polyanilines

    Science.gov (United States)

    1993-01-01

    condensation were not successful, but further work produced polymer under the following conditions: Synthesis Diketone I (2.40 g, 10.0 mmol) in 10 mL...goal of producing a processible form of the conducting polymer polyaniline (PANI), the Phase I program concentrated on development of the synthesis of...extension of the original research to a Phase II effort. Diketone - Diamine Polycondensation Towards a Soluble PAni Precursor To achieve the

  16. The Solubility Parameters of Ionic Liquids

    Directory of Open Access Journals (Sweden)

    Andrzej Marciniak

    2010-04-01

    Full Text Available The Hildebrand’s solubility parameters have been calculated for 18 ionic liquids from the inverse gas chromatography measurements of the activity coefficients at infinite dilution. Retention data were used for the calculation. The solubility parameters are helpful for the prediction of the solubility in the binary solvent mixtures. From the solubility parameters, the standard enthalpies of vaporization of ionic liquids were estimated.

  17. Radionuclide solubility control by solid solutions

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, F.; Klinkenberg, M.; Rozov, K.; Bosbach, D. [Forschungszentrum Juelich GmbH (Germany). Inst. of Energy and Climate Research - Nuclear Waste Management and Reactor Safety (IEK-6); Vinograd, V. [Frankfurt Univ. (Germany). Inst. of Geosciences

    2015-07-01

    The migration of radionuclides in the geosphere is to a large extend controlled by sorption processes onto minerals and colloids. On a molecular level, sorption phenomena involve surface complexation, ion exchange as well as solid solution formation. The formation of solid solutions leads to the structural incorporation of radionuclides in a host structure. Such solid solutions are ubiquitous in natural systems - most minerals in nature are atomistic mixtures of elements rather than pure compounds because their formation leads to a thermodynamically more stable situation compared to the formation of pure compounds. However, due to a lack of reliable data for the expected scenario at close-to equilibrium conditions, solid solution systems have so far not been considered in long-term safety assessments for nuclear waste repositories. In recent years, various solid-solution aqueous solution systems have been studied. Here we present state-of-the art results regarding the formation of (Ra,Ba)SO{sub 4} solid solutions. In some scenarios describing a waste repository system for spent nuclear fuel in crystalline rocks {sup 226}Ra dominates the radiological impact to the environment associated with the potential release of radionuclides from the repository in the future. The solubility of Ra in equilibrium with (Ra,Ba)SO{sub 4} is much lower than the one calculated with RaSO{sub 4} as solubility limiting phase. Especially, the available literature data for the interaction parameter W{sub BaRa}, which describes the non-ideality of the solid solution, vary by about one order of magnitude (Zhu, 2004; Curti et al., 2010). The final {sup 226}Ra concentration in this system is extremely sensitive to the amount of barite, the difference in the solubility products of the end-member phases, and the degree of non-ideality of the solid solution phase. Here, we have enhanced the fundamental understanding regarding (1) the thermodynamics of (Ra,Ba)SO{sub 4} solid solutions and (2) the

  18. Cloud processing of soluble gases

    Science.gov (United States)

    Laj, P.; Fuzzi, S.; Facchini, M. C.; Lind, J. A.; Orsi, G.; Preiss, M.; Maser, R.; Jaeschke, W.; Seyffer, E.; Helas, G.; Acker, K.; Wieprecht, W.; Möller, D.; Arends, B. G.; Mols, J. J.; Colvile, R. N.; Gallagher, M. W.; Beswick, K. M.; Hargreaves, K. J.; Storeton-West, R. L.; Sutton, M. A.

    Experimental data from the Great Dun Fell Cloud Experiment 1993 were used to investigate interactions between soluble gases and cloud droplets. Concentrations of H 2O 2, SO 2, CH 3COOOH, HCOOH, and HCHO were monitored at different sites within and downwind of a hill cap cloud and their temporal and spatial evolution during several cloud events was investigated. Significant differences were found between in-cloud and out-of-cloud concentrations, most of which could not be explained by simple dissolution into cloud droplets. Concentration patterns were analysed in relation to the chemistry of cloud droplets and the gas/liquid equilibrium. Soluble gases do not undergo similar behaviour: CH 3COOH simply dissolves in the aqueous phase and is outgassed upon cloud dissipation; instead, SO 2 is consumed by its reaction with H 2O 2. The behaviour of HCOOH is more complex because there is evidence for in-cloud chemical production. The formation of HCOOH interferes with the odd hydrogen cycle by enhancing the liquid-phase production of H 2O 2. The H 2O 2 concentration in cloud therefore results from the balance of consumption by oxidation of SO 2 in-cloud production, and the rate by which it is supplied to the system by entrainment of new air into the clouds.

  19. Dye solubility in supercritical carbon dioxide fluid

    Directory of Open Access Journals (Sweden)

    Yan Jun

    2015-01-01

    Full Text Available Supercritical carbon dioxide fluid is an alternative solvent for the water of the traditional dyeing. The solubility of dyestuff affects greatly the dyeing process. A theoretical model for predicting the dye solubility is proposed and verified experimentally. The paper concludes that the pressure has a greater impact on the dyestuff solubility than temperature, and an optimal dyeing condition is suggested for the highest distribution coefficient of dyestuff.

  20. Issues concerning the determination of solubility products of sparingly soluble crystalline solids. Solubility of HfO{sub 2}(cr)

    Energy Technology Data Exchange (ETDEWEB)

    Rai, Dhanpat [Rai Enviro-Chem, LLC, Yachats, OR (United States); Kitamura, Akira [Japan Atomic Energy Agency, Ibaraki (Japan); Rosso, Kevin M. [Pacific Northwest National Laboratory, Richland, WA (United States); Sasaki, Takayuki; Kobayashi, Taishi [Kyoto Univ. (Japan)

    2016-11-01

    Solubility studies were conducted with HfO{sub 2}(cr) solid as a function HCl and ionic strength ranging from 2.0 to 0.004 mol kg{sup -1}. These studies involved (1) using two different amounts of the solid phase, (2) acid washing the bulk solid phase, (3) preheating the solid phase to 1400 C, and (4) heating amorphous HfO{sub 2}(am) suspensions to 90 C to ascertain whether the HfO{sub 2}(am) converts to HfO{sub 2}(cr) and to determine the solubility from the oversaturation direction. Based on the results of these treatments it is concluded that the HfO{sub 2}(cr) contains a small fraction of less crystalline, but not amorphous, material [HfO{sub 2}(lcr)] and this, rather than the HfO{sub 2}(cr), is the solubility-controlling phase in the range of experimental variables investigated in this study. The solubility data are interpreted using both the Pitzer and SIT models and they provide log{sub 10} K{sup 0} values of -(59.75±0.35) and -(59.48±0.41), respectively, for the solubility product of HfO{sub 2}(lcr)[HfO{sub 2}(lcr) + 2H{sub 2}O ↔ Hf{sup 4+} + 4OH{sup -}]. The log{sub 10} of the solubility product of HfO{sub 2}(cr) is estimated to be < -63. The observation of a small fraction of less crystalline higher solubility material is consistent with the general picture that mineral surfaces are often structurally and/or compositionally imperfect leading to a higher solubility than the bulk crystalline solid. This study stresses the urgent need, during interpretation of solubility data, of taking precautions to make certain that the observed solubility behavior for sparingly-soluble solids is assigned to the proper solid phase.

  1. Assessment

    Institute of Scientific and Technical Information of China (English)

    Geoff Brindley

    2005-01-01

    @@ Introduction TERMINOLOGY AND KEY CONCEPTS The term assessment refers to a variety of ways of collecting information on a learner's language ability or achievement. Although testing and assessment are often used interchangeably, the latter is an umbrella term encompassing measurement instruments administered on a ‘one-off’ basis such as tests, as well as qualitative methods of monitoring and recording student learning such as observation, simulations of project work. Assessment is also distinguished from evaluation which is concerned with the overall language programme and not just with what individual students have learnt. Proficiency assessment refers to the assessment of general language abilities acquired by the learner independent of a course of study.This kind of assessment is often done through the administration of standardised commercial language-proficency tests. On the other hand, assessment of achievement aims to establish what a student had learned in relation to a particular course or curriculum (thus frequently carried out by the teacher) .Achievement assesssment may be based either on the specific content of the course or on the course objectives (Hughes 1989).

  2. Molecular Thermodynamic Modeling of Mixed Solvent Solubility

    DEFF Research Database (Denmark)

    Ellegaard, Martin Dela; Abildskov, Jens; O’Connell, John P.

    2010-01-01

    A method based on statistical mechanical fluctuation solution theory for composition derivatives of activity coefficients is employed for estimating dilute solubilities of 11 solid pharmaceutical solutes in nearly 70 mixed aqueous and nonaqueous solvent systems. The solvent mixtures range from...... nearly ideal to strongly nonideal. The database covers a temperature range from 293 to 323 K. Comparisons with available data and other existing solubility methods show that the method successfully describes a variety of observed mixed solvent solubility behaviors using solute−solvent parameters from...... global regression of ternary data as well as predictions based on pure solvent solubilities with an average error of about 10% on mole fractions....

  3. Equilibrium drug solubility measurements in 96-well plates reveal similar drug solubilities in phosphate buffer pH 6.8 and human intestinal fluid.

    Science.gov (United States)

    Heikkilä, Tiina; Karjalainen, Milja; Ojala, Krista; Partola, Kirsi; Lammert, Frank; Augustijns, Patrick; Urtti, Arto; Yliperttula, Marjo; Peltonen, Leena; Hirvonen, Jouni

    2011-02-28

    This study was conducted to develop a high throughput screening (HTS) method for the assessment of equilibrium solubility of drugs. Solid-state compounds were precipitated from methanol in 96-well plates, in order to eliminate the effect of co-solvent. Solubility of twenty model drugs was analyzed in water and aqueous solutions (pH 1.2 and 6.8) in 96-well plates and in shake-flasks (UV detection). The results obtained with the 96-well plate method correlated well (R(2)=0.93) between the shake-flask and 96-well plates over the wide concentration scale of 0.002-169.2mg/ml. Thereafter, the solubility tests in 96-well plates were performed using fasted state human intestinal fluid (HIF) from duodenum of healthy volunteers. The values of solubility were similar in phosphate buffer solution (pH 6.8) and HIF over the solubility range of 10(2)-10(5)μg/ml. The new 96-well plate method is useful for the screening of equilibrium drug solubility during the drug discovery process and it also allows the use of human intestinal fluid in solubility screening.

  4. Solubility Enhancement of a Poorly Water Soluble Drug by Forming Solid Dispersions using Mechanochemical Activation

    OpenAIRE

    Rojas-Oviedo, I.; Retchkiman-Corona, B.; Quirino-Barreda, C. T.; Cárdenas, J.; Schabes-Retchkiman, P. S.

    2012-01-01

    Mechanochemical activation is a practical cogrinding operation used to obtain a solid dispersion of a poorly water soluble drug through changes in the solid state molecular aggregation of drug-carrier mixtures and the formation of noncovalent interactions (hydrogen bonds) between two crystalline solids such as a soluble carrier, lactose, and a poorly soluble drug, indomethacin, in order to improve its solubility and dissolution rate. Samples of indomethacin and a physical mixture with a weigh...

  5. Plasma soluble urokinase plasminogen activator receptor (suPAR) level is associated with myocardial impairment assessed with advanced echocardiography in Type 1 Diabetes Patients with normal ejection fraction and without known heart disease or end stage renal disease

    DEFF Research Database (Denmark)

    Theilade, Simone; Rossing, Peter; Eugen-Olsen, Jesper;

    2016-01-01

    PAR is associated with early myocardial impairment assessed with advanced echocardiographic methods. Methods In an observational study on 318 type 1 diabetes patients without known heart disease and with normal left ventricular ejection fraction (LVEF) (biplane LVEF >45%), we performed conventional, tissue Doppler...... was: 58±5%. suPAR levels were not associated with LVEF (p = 0.11). In adjusted models, higher suPAR levels were independently associated with both impaired systolic function assessed with global longitudinal strain (GLS) and tissue velocity s', and with impaired diastolic measures a' and e'/a' (all p...... ≤ 0.034). In multivariable analysis including cardiovascular riskfactors and both systolic and diastolic measures (GLS and e'/a') both remained independently associated with suPAR levels (p ≤ 0.012). Conclusions In type 1 diabetes patients with normal LVEF and without known heart disease, su...

  6. Specific single chain variable fragment (ScFv) antibodies to angiotensin II AT(2) receptor: evaluation of the angiotensin II receptor expression in normal and tumor-bearing mouse lung.

    Science.gov (United States)

    Tamura, Masaaki; Yan, Heping; Zegarra-Moro, Ofelia; Edl, Jennifer; Oursler, Stephanie; Chard-Bergstrom, Cindy; Andrews, Gordon; Kanehira, Tsutomu; Takekoshi, Susumu; Mernaugh, Ray

    2008-08-01

    To gain insight into the mechanism by which angiotensin II type 2 receptor (AT(2)) regulates carcinogen-induced lung tumorigenesis, we have newly developed anti-AT(2) single chain variable fragment (ScFv) antibodies using a rodent phage-displayed recombinant antibody library with various peptide fragments of the receptor protein, and investigated the expression of the AT(2) receptor protein. The specificity of the antibodies was verified using AT(2) over-expressing COS-7 cells and AT(2) naturally expressing PC12W cells. In control wild type mouse lung, a stronger immunoreactivity was observed in bronchial epithelial cells. A moderate immunoreactivity was detected in pulmonary vascular walls and vascular endothelial cells. In the lungs possessing tobacco-specific nitrosamine (NNK)-induced tumors, significantly increased AT(2) and AT(1 )immunostaining was observed in adenomatous lesions. These data suggest that the increase in both receptors' expression in the alveolar epithelial cells may be accompanied with the onset of NNK-induced tumorigenesis and hence play important roles in lung tumorigenesis.

  7. Solubility Characteristics of PCBM and C60.

    Science.gov (United States)

    Boucher, David; Howell, Jason

    2016-11-10

    Empirical data indicate that several good solvents for C60 and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) have substantial polar and hydrogen-bonding components, which are not intrinsic to the structure of the C60 and PCBM molecules themselves. Functional solubility parameter (FSP) and convex solubility parameter (CSP) computations are performed on C60 and PCBM using solubility data available in the literature. The CSP and FSP results are compared to previously reported Hansen solubility parameters (HSPs) and to the parameters calculated using additive functional group contribution methods. The CSP and FSP methods confirm the anomalously large polar and hydrogen-bonding parameters, δP and δH, obtained experimentally for C60 and PCBM. This behavior, which is quite irregular given the structure of the molecules, is due to the fact that several good solvents have high δP and δH values. Thus, these irregularities are highlighted by the CSP and FSP calculations. Additional contradictory solubility characteristics are disclosed by comparing the experimental solubility parameters to a linear solvation energy relationship (LSER) model, additive functional group calculations, and COSMO-RS computations. The FSP solubility function strongly suggests that the solubility parameters do not accurately represent the cohesive energy density properties of C60 and PCBM, as intended, but rather they manifest the properties of the solvents, e.g., high δP and δH values, that are necessary to accommodate these molecules in the liquid phase.

  8. A Colorful Solubility Exercise for Organic Chemistry

    Science.gov (United States)

    Shugrue, Christopher R.; Mentzen, Hans H., II; Linton, Brian R.

    2015-01-01

    A discovery chemistry laboratory has been developed for the introductory organic chemistry student to investigate the concepts of polarity, miscibility, solubility, and density. The simple procedure takes advantage of the solubility of two colored dyes in a series of solvents or solvent mixtures, and the diffusion of colors can be easily…

  9. Applications of soluble dietary fibers in beverages

    OpenAIRE

    C. I. Beristain; M. E. Rodríguez-Huezo; C. Lobato-Calleros; F. Cruz-Sosa; R. Pedroza-Islas; J. R. Verde-Calvo

    2006-01-01

    In this work the importance of soluble dietary fibers in the human diet is discussed. Traditional and new sources of soluble dietary fiber are mentioned, and a description of how to apply them in different types of beverages such as energy drinks, sport drinks, carbonated beverages and protein-based beverages in order to achieve enhanced functional properties is given.

  10. Light extinction method for solubility measurement

    Institute of Scientific and Technical Information of China (English)

    Shui Wang; Jingkang Wang; Qiuxiang Yin; Yongli Wang

    2005-01-01

    A novel measurement method for chemical solubility determination is brought forward, in which the advantages of two kinds of traditional methods are united. The results show that the concentration of unsolved particles suspending in the solution can be determined by measuring I/I0 (ratio of the transmission intensity to the incident intensity) of the laser beam permeating through the solution according to Lamben-Beer law. The biggest relative deviation for the solubility data determined is less than 1.5% for the sparingly soluble substances and 0.3% for the opulently soluble substances. By comparison of the experimental solubility data with previous data, the light extinction method is demonstrated to be stable and reliable.

  11. A Strategy for Generating a Broad-Spectrum Monoclonal Antibody and Soluble Single-Chain Variable Fragments against Plant Potyviruses.

    Science.gov (United States)

    Liu, Han-Lin; Lin, Wei-Fang; Hu, Wen-Chi; Lee, Yung-An; Chang, Ya-Chun

    2015-10-01

    Potyviruses are major pathogens that often cause mixed infection in calla lilies. To reduce the time and cost of virus indexing, a detection method for the simultaneous targeting of multiple potyviruses was developed by generating a broad-spectrum monoclonal antibody (MAb) for detecting the greatest possible number of potyviruses. The conserved 121-amino-acid core regions of the capsid proteins of Dasheen mosaic potyvirus (DsMV), Konjak mosaic potyvirus (KoMV), and Zantedeschia mild mosaic potyvirus (ZaMMV) were sequentially concatenated and expressed as a recombinant protein for immunization. After hybridoma cell fusion and selection, one stable cell line that secreted a group-specific antibody, named C4 MAb, was selected. In the reaction spectrum test, the C4 MAb detected at least 14 potyviruses by indirect enzyme-linked immunosorbent assay (I-ELISA) and Western blot analysis. Furthermore, the variable regions of the heavy (VH) and light (VL) chains of the C4 MAb were separately cloned and constructed as single-chain variable fragments (scFvs) for expression in Escherichia coli. Moreover, the pectate lyase E (PelE) signal peptide of Erwinia chrysanthemi S3-1 was added to promote the secretion of C4 scFvs into the medium. According to Western blot analysis and I-ELISA, the soluble C4 scFv (VL-VH) fragment showed a binding specificity similar to that of the C4 MAb. Our results demonstrate that a recombinant protein derived from fusion of the conserved regions of viral proteins has the potential to produce a broad-spectrum MAb against a large group of viruses and that the PelE signal peptide can improve the secretion of scFvs in E. coli.

  12. Indomethacin solubility estimation in 1,4-dioxane + water mixtures by the extended hildebrand solubility approach

    Directory of Open Access Journals (Sweden)

    Miller A Ruidiaz

    2011-09-01

    Full Text Available Extended Hildebrand Solubility Approach (EHSA was successfully applied to evaluate the solubility of Indomethacin in 1,4-dioxane + water mixtures at 298.15 K. An acceptable correlation-performance of EHSA was found by using a regular polynomial model in order four of the W interaction parameter vs. solubility parameter of the mixtures (overall deviation was 8.9%. Although the mean deviation obtained was similar to that obtained directly by means of an empiric regression of the experimental solubility vs. mixtures solubility parameters, the advantages of EHSA are evident because it requires physicochemical properties easily available for drugs.

  13. Reproducibility over time and effect of low-dose aspirin on soluble P-selectin and soluble CD40 ligand.

    Science.gov (United States)

    Valdes, Vanessa; Nardi, Michael A; Elbaum, Lindsay; Berger, Jeffrey S

    2015-07-01

    Platelet markers [soluble CD40 ligand (sCD40L) and soluble p selectin (sPselectin)] are associated with platelet activation and cardiovascular events. We sought to investigate the reproducibility of these markers over time and the effect of low-dose aspirin on sCD40L and sPselectin in plasma and serum. Following an overnight fast, 40 healthy volunteers had weekly phlebotomy and were administered aspirin 81 mg/day between weeks 3 and 4. Reproducibility over time was assessed by coefficient of variation (CV) and inter-class correlation coefficient. Correlation between markers was assessed using Pearson r statistic. Difference between levels pre- and post-aspirin was measured with Wilcoxon signed-rank test. Data are presented as median (interquartile range). sCD40L and sPselectin measurements were reproducible over time in plasma and serum (CV < 10 %). Measurement of sCD40L and sPselectin in plasma correlated with levels in serum before aspirin and after aspirin. There was no significant correlation between sCD40L and sPselectin. After 1-week of aspirin 81 mg/day, there was a reduction in sCD40L and sPselectin in serum and plasma, respectively. Soluble CD40L and sPselectin are independent markers that are reproducible over time in both plasma and sera and are reduced by 1-week of low-dose aspirin.

  14. Solubilities of uranium for TILA-99

    Energy Technology Data Exchange (ETDEWEB)

    Ollila, K. [VTT Chemical Technology, Espoo (Finland); Ahonen, L. [Geological Survey of Finland, Espoo (Finland)

    1998-11-01

    This report presents the evaluation of the uranium solubilities in the reference waters of TILA-99. The behaviour of uranium has been discussed separately in the near-field and far-field conditions. The bentonite/groundwater interactions have been considered in the compositions of the fresh and saline near-field reference waters. The far-field groundwaters` compositions include fresh, brackish, saline and very saline, almost brine-type compositions. The pH and redox conditions, as the main parameters affecting the solubilities, are considered. A literature study was made in order to obtain information on the recent dissolution and leaching experiments of UO{sub 2} and spent fuel. The latest literature includes studies on UO{sub 2} solubility under anoxic conditions, in which the methods for simulating the reducing conditions of deep groundwater have been improved. Studies on natural uraninite and its alteration products give a valuable insight into the long-term behaviour of spent fuel. Also the solubility equilibria for some relevant poorly known uranium minerals have been determined. The solubilities of the selected solubility-limiting phases were calculated using the geochemical code, EQ3/6. The NEA database for uranium was the basis for the modelling. The recently extended and updated SR `97 database was used for comparison. The solubility products for uranophane were taken from the latest literature. The recommended values for solubilities were given after a comparison between the calculated solubilities, experimental information and measured concentrations in natural groundwaters. The experiments include several UO{sub 2} dissolution studies in synthetic groundwaters with compositions close to the reference groundwaters. (author) 81 refs.

  15. Water Soluble Polymers for Pharmaceutical Applications

    Directory of Open Access Journals (Sweden)

    Veeran Gowda Kadajji

    2011-11-01

    Full Text Available Advances in polymer science have led to the development of novel drug delivery systems. Some polymers are obtained from natural resources and then chemically modified for various applications, while others are chemically synthesized and used. A large number of natural and synthetic polymers are available. In the present paper, only water soluble polymers are described. They have been explained in two categories (1 synthetic and (2 natural. Drug polymer conjugates, block copolymers, hydrogels and other water soluble drug polymer complexes have also been explained. The general properties and applications of different water soluble polymers in the formulation of different dosage forms, novel delivery systems and biomedical applications will be discussed.

  16. Effect of Cyclodextrin Types and Co-Solvent on Solubility of a Poorly Water Soluble Drug

    Science.gov (United States)

    Charumanee, Suporn; Okonogi, Siriporn; Sirithunyalug, Jakkapan; Wolschann, Peter; Viernstein, Helmut

    2016-01-01

    The aim of the study was to investigate the solubility of piroxicam (Prx) depending on the inclusion complexation with various cyclodextrins (CDs) and on ethanol as a co-solvent. The phase-solubility method was applied to determine drug solubility in binary and ternary systems. The results showed that in systems consisting of the drug dissolved in ethanol–water mixtures, the drug solubility increased exponentially with a rising concentration of ethanol. The phase solubility measurements of the drug in aqueous solutions of CDs, β-CD and γ-CD exhibited diagrams of AL-type, whereas 2,6-dimethyl-β-CD revealed AP-type. The destabilizing effect of ethanol as a co-solvent was observed for all complexes regardless of the CD type, as a consequence of it the lowering of the complex formation constants. In systems with a higher concentration of ethanol, the drug solubility was increased in opposition to the decreasing complex formation constants. According to this study, the type of CDs played a more important role on the solubility of Prx, and the use of ethanol as a co-solvent exhibited no synergistic effect on the improvement of Prx solubility. The Prx solubility was increased again due to the better solubility in ethanol. PMID:27763573

  17. Solubility prediction of satranidazole in propylene glycol-water mixtures using extended hildebrand solubility approach.

    Science.gov (United States)

    Rathi, P B

    2011-11-01

    Extended Hildebrand solubility approach is used to estimate the solubility of satranidazole in binary solvent systems. The solubility of satranidazole in various propylene glycol-water mixtures was analyzed in terms of solute-solvent interactions using a modified version of Hildebrand-Scatchard treatment for regular solutions. The solubility equation employs term interaction energy (W) to replace the geometric mean (δ(1)δ(2)), where δ(1) and δ(2) are the cohesive energy densities for the solvent and solute, respectively. The new equation provides an accurate prediction of solubility once the interaction energy, W, is obtained. In this case, the energy term is regressed against a polynomial in δ(1) of the binary mixture. A quartic expression of W in terms of solvent solubility parameter was found for predicting the solubility of satranidazole in propylene glycol-water mixtures. The expression yields an error in mole fraction solubility of ~3.74%, a value approximating that of the experimentally determined solubility. The method has potential usefulness in preformulation and formulation studies during which solubility prediction is important for drug design.

  18. Solubility prediction of satranidazole in propylene glycol-water mixtures using extended hildebrand solubility approach

    Directory of Open Access Journals (Sweden)

    P B Rathi

    2011-01-01

    Full Text Available Extended Hildebrand solubility approach is used to estimate the solubility of satranidazole in binary solvent systems. The solubility of satranidazole in various propylene glycol-water mixtures was analyzed in terms of solute-solvent interactions using a modified version of Hildebrand-Scatchard treatment for regular solutions. The solubility equation employs term interaction energy (W to replace the geometric mean (δ1δ2 , where δ1 and δ2 are the cohesive energy densities for the solvent and solute, respectively. The new equation provides an accurate prediction of solubility once the interaction energy, W, is obtained. In this case, the energy term is regressed against a polynomial in δ1 of the binary mixture. A quartic expression of W in terms of solvent solubility parameter was found for predicting the solubility of satranidazole in propylene glycol-water mixtures. The expression yields an error in mole fraction solubility of ~3.74%, a value approximating that of the experimentally determined solubility. The method has potential usefulness in preformulation and formulation studies during which solubility prediction is important for drug design.

  19. Effect of Cyclodextrin Types and Co-Solvent on Solubility of a Poorly Water Soluble Drug

    Directory of Open Access Journals (Sweden)

    Suporn Charumanee

    2016-10-01

    Full Text Available The aim of the study was to investigate the solubility of piroxicam (Prx depending on the inclusion complexation with various cyclodextrins (CDs and on ethanol as a co-solvent. The phase-solubility method was applied to determine drug solubility in binary and ternary systems. The results showed that in systems consisting of the drug dissolved in ethanol–water mixtures, the drug solubility increased exponentially with a rising concentration of ethanol. The phase solubility measurements of the drug in aqueous solutions of CDs, β-CD and γ-CD exhibited diagrams of AL-type, whereas 2,6-dimethyl-β-CD revealed AP-type. The destabilizing effect of ethanol as a co-solvent was observed for all complexes regardless of the CD type, as a consequence of it the lowering of the complex formation constants. In systems with a higher concentration of ethanol, the drug solubility was increased in opposition to the decreasing complex formation constants. According to this study, the type of CDs played a more important role on the solubility of Prx, and the use of ethanol as a co-solvent exhibited no synergistic effect on the improvement of Prx solubility. The Prx solubility was increased again due to the better solubility in ethanol.

  20. Organogel formation rationalized by Hansen solubility parameters.

    Science.gov (United States)

    Raynal, Matthieu; Bouteiller, Laurent

    2011-08-07

    Some organic compounds gelate particular solvents by forming a network of anisotropic fibres. We show that Hansen solubility parameters can be used to predict the range of solvents that are likely to be gelled by any given gelator.

  1. Enhanced dopant solubility in strained silicon

    Energy Technology Data Exchange (ETDEWEB)

    Adey, J [School of Physics, University of Exeter, Exeter EX4 4QL (United Kingdom); Jones, R [School of Physics, University of Exeter, Exeter EX4 4QL (United Kingdom); Briddon, P R [Physics Centre, School of Natural Science, Newcastle upon Tyne NE1 7RU (United Kingdom)

    2004-12-22

    The effect of biaxial strain on the solubility of the common donor arsenic and acceptor boron is calculated using spin-polarized local density functional theory. The change in solubility with strain is considered in terms of contributions from the change in total energy and Fermi energy with strain. The solubility of boron is found to be enhanced by compressive biaxial strain due to a reduction in the total energy of the small substitutional impurity and an increase in the Fermi energy for compressive strain. The solubility of arsenic is shown to be enhanced by tensile strain and this is due entirely to the change in Fermi energy. For boron as well as arsenic the change in Fermi energy with strain is shown to make the dominant contribution.

  2. A framework for API solubility modelling

    DEFF Research Database (Denmark)

    Conte, Elisa; Gani, Rafiqul; Crafts, Peter

    The solubility of solid organic compounds in water and organic solvents is a fundamental thermodynamic property for many purposes such as product-process design and optimization, for the chemical and pharmaceutical industry. Experimental literature solubility data are usually scarce and temperature......-dependent measurements are expensive in terms of time and resources. The few available data are badly organized and difficult to use for fast solubility calculations and solvent screening. Available models often require time consuming and complex implementation together with a good user expertise for their efficient use....... In addition, most of the models are not predictive and requires experimental data for the calculation of the needed parameters. This work aims at developing an efficient framework for the solubility modelling of Active Pharmaceutical Ingredients (API) in water and organic solvents. With this framework...

  3. DEVELOPMENT OF SOLUBILITY PRODUCT VISUALIZATION TOOLS

    Energy Technology Data Exchange (ETDEWEB)

    T.F. Turner; A.T. Pauli; J.F. Schabron

    2004-05-01

    Western Research Institute (WRI) has developed software for the visualization of data acquired from solubility tests. The work was performed in conjunction with AB Nynas Petroleum, Nynashamn, Sweden who participated as the corporate cosponsor for this Jointly Sponsored Research (JSR) task. Efforts in this project were split between software development and solubility test development. The Microsoft Windows-compatible software developed inputs up to three solubility data sets, calculates the parameters for six solid body types to fit the data, and interactively displays the results in three dimensions. Several infrared spectroscopy techniques have been examined for potential use in determining bitumen solubility in various solvents. Reflectance, time-averaged absorbance, and transmittance techniques were applied to bitumen samples in single and binary solvent systems. None of the techniques were found to have wide applicability.

  4. Experimental and theoretical studies on physico-chemical parameters affecting the solubility of phosphogypsum.

    Science.gov (United States)

    Papanicolaou, Fanos; Antoniou, Stella; Pashalidis, Ioannis

    2009-10-01

    Phosphogypsum is a waste by-product of the phosphate fertilizer industry, which is usually disposed in the environment because of its restricted use in industrial applications. Physico-chemical conditions existing in stack fluids and leachates are of major importance and determine solubility and redox stability of phosphogypsum, as well as radionuclide release from stacks to terrestrial environments. The aim of this study is to assess the effect of key parameters (e.g. ionic strength, temperature, pH) on the solubility of phosphogypsum. Phosphogypsum sampling and in-situ measurements were carried out at a coastal stack in Cyprus, solubility experiments were performed in simulated laboratory systems and thermodynamic calculations by means of MINTEQA2, an equilibrium speciation model. Generally, increasing ionic strength and temperature leads to increased phosphogypsum solubility, with the former being much more effective. The increased solubility of phosphogypsum in saline solutions is attributed solely to ionic strength effects on the activity of ionic species in solution and no solid phase transformations could be observed. The effect of pH on phosphogypsum solubility seems to be insignificant at least in a pH range between 4 and 8. Regarding uranium levels, there is a strong correlation between salinity and uranium concentration and linear correlation between phosphogypsum solubility and uranium levels in stack solutions, indicating the incorporation of uranium into the gypsum lattice and the formation of a solid solution.

  5. Experimental and theoretical studies on physico-chemical parameters affecting the solubility of phosphogypsum

    Energy Technology Data Exchange (ETDEWEB)

    Papanicolaou, Fanos; Antoniou, Stella [Chemistry Department, University of Cyprus, P.O. Box 20537, 1678 Nicosia (Cyprus); Pashalidis, Ioannis [Chemistry Department, University of Cyprus, P.O. Box 20537, 1678 Nicosia (Cyprus)], E-mail: pspasch@ucy.ac.cy

    2009-10-15

    Phosphogypsum is a waste by-product of the phosphate fertilizer industry, which is usually disposed in the environment because of its restricted use in industrial applications. Physico-chemical conditions existing in stack fluids and leachates are of major importance and determine solubility and redox stability of phosphogypsum, as well as radionuclide release from stacks to terrestrial environments. The aim of this study is to assess the effect of key parameters (e.g. ionic strength, temperature, pH) on the solubility of phosphogypsum. Phosphogypsum sampling and in-situ measurements were carried out at a coastal stack in Cyprus, solubility experiments were performed in simulated laboratory systems and thermodynamic calculations by means of MINTEQA2, an equilibrium speciation model. Generally, increasing ionic strength and temperature leads to increased phosphogypsum solubility, with the former being much more effective. The increased solubility of phosphogypsum in saline solutions is attributed solely to ionic strength effects on the activity of ionic species in solution and no solid phase transformations could be observed. The effect of pH on phosphogypsum solubility seems to be insignificant at least in a pH range between 4 and 8. Regarding uranium levels, there is a strong correlation between salinity and uranium concentration and linear correlation between phosphogypsum solubility and uranium levels in stack solutions, indicating the incorporation of uranium into the gypsum lattice and the formation of a solid solution.

  6. Correlation of Helium Solubility in Liquid Nitrogen

    Science.gov (United States)

    VanDresar, Neil T.; Zimmerli, Gregory A.

    2012-01-01

    A correlation has been developed for the equilibrium mole fraction of soluble gaseous helium in liquid nitrogen as a function of temperature and pressure. Experimental solubility data was compiled and provided by National Institute of Standards and Technology (NIST). Data from six sources was used to develop a correlation within the range of 0.5 to 9.9 MPa and 72.0 to 119.6 K. The relative standard deviation of the correlation is 6.9 percent.

  7. Low Soluble Syndecan-1 Precedes Preeclampsia.

    Directory of Open Access Journals (Sweden)

    Robin E Gandley

    Full Text Available Syndecan-1 (Sdc1; CD138 is a major transmembrane heparan sulfate proteoglycan expressed on the extracellular, luminal surface of epithelial cells and syncytiotrophoblast, thus comprising a major component of the glycocalyx of these cells. The "soluble" (shed form of Sdc1 has paracrine and autocrine functions and is normally produced in a regulated fashion. We compared plasma soluble Sdc1 concentrations, in relation to placental Sdc1 expression, in uncomplicated (control and preeclamptic pregnancies.We evaluated soluble Sdc1 across uncomplicated pregnancy, and between preeclamptic, gestational hypertensive and control patients at mid-pregnancy (20 weeks and 3rd trimester by ELISA. Placental expression level of Sdc1 was compared between groups in relation to pre-delivery plasma soluble Sdc1. Participants were recruited from Magee-Womens Hospital.In uncomplicated pregnancy, plasma soluble Sdc1 rose significantly in the 1st trimester, and reached an approximate 50-fold increase at term compared to post pregnancy levels. Soluble Sdc1 was lower at mid-pregnancy in women who later developed preeclampsia (P<0.05, but not gestational hypertension, compared to controls, and remained lower at late pregnancy in preeclampsia (P<0.01 compared to controls. Sdc1 was prominently expressed on syncytiotrophoblast of microvilli. Syncytiotrophoblast Sdc1 immunostaining intensities, and mRNA content in villous homogenates, were lower in preeclampsia vs. controls (P<0.05. Soluble Sdc1 and Sdc1 immunostaining scores were inversely associated with systolic blood pressures, and positively correlated with infant birth weight percentile.Soluble Sdc1 is significantly lower before the clinical onset of preeclampsia, with reduced expression of Sdc1 in the delivered placenta, suggesting a role for glycocalyx disturbance in preeclampsia pathophysiology.

  8. Expression and optimization of anti-AFB1 scFv in Escherichia coli%抗黄曲霉毒素B1单链抗体在大肠杆菌中的表达及优化

    Institute of Scientific and Technical Information of China (English)

    杨炼; 张艳红; 丁虎生; 王丽云; 陈卫; 张灏

    2009-01-01

    [Objective] A drawback of the expression of single chain antibody fragment (scFv) in prokaryotic system is the protein accumulation in the cytoplasm as inclusion body. We aimed at high-level production of an anti-aflatoxin Bl scFv in functional form. [Methods] The gene of scFv-H4 was cloned into pET22b vector and transformed into E. coli BL21(DE3) and Origami (DE3), respectively. The amount of functional scFv-H4 was optimized in terms of IPTG concentration and induction temperature. [Results] scFv-H4 could be expressed in both BL21(DE3) and Origami (DE3). Compared with BL21(DE3), Origami(DE3) could express multifunctional scFv-H4 (35 mg/mL) and less in inclusion body (11% of the total expression) . The expression of scFv-H4 was significantly affected by induction temperature rather than IPTG concentration. [Conclusion] The p£T22b could be used for high-level expression of the functional scFv-H4 in Origami (DE3) , which has an oxidative cytoplasm. In addition, the induction at low temperature avoided the formation of inclusion body.%[目的]继杂交瘤技术后,重组抗体技术是新一代的抗体制备技术.然而如何用原核系统中较多地表达具有生物活性的单链抗体,避免包涵体形成仍是一个需要探讨的问题.[方法]将目的基因scFv-H4克隆到载体pET22b上,分别转入大肠杆菌BL21(DE3)和Origami(DE3)中,通过改变诱导温度和IPTG浓度,比较具有生物活性的蛋白量以及包涵体的量.[结果]在BL21(DE3)中,pET22b能产生大量表达scFv-H4,而BL21(DE3)的含有trxA和gor双突变的衍生菌Origami(DE3)表达的scFv-H4的总量较少,但是具有生物活性的蛋白量较多(35 mg/L培养物),具有生物活性的蛋白比例也较BL2l(DE3)高.另外IFrG的浓度对scFv-H4表达没有显著影响,而较高的诱导温度会促使表达的蛋白形成包涵体.[结论]在较低的温度下,pET22b能在Origami(DE3)能较好地表达具有生物活性的scFv-H4,减少包涵体的比例,为后续的抗

  9. Solubility of deposited airborne heavy metals

    Science.gov (United States)

    Cizmecioglu, Sibel C.; Muezzinoglu, Aysen

    2008-09-01

    Toxic effects of heavy metals in water and soil environments are important. Quantifying the heavy metal concentrations and their solubilities in dry and wet deposition samples is part of atmospheric research. Soluble fractions of the deposited air pollutants are important in food chain mechanisms as heavy metals may cause ecotoxic impacts. In this study, the solubilities of Cr, Cd, Pb, Cu, Zn, and Ni were investigated in deposition samples for total, dissolved, and suspended fractions after collection in a surrogate, water-surface sampler in Izmir, Turkey, during October 2003 to June 2004. To find overall solubility of each metal in dry and wet deposition samples, concentrations in soluble and suspended phases of aqueous solutions were analyzed separately. Ratios between total and dissolved forms and the metals in the same forms were analyzed and evaluated statistically. It was found that the deposited metal fluxes were significantly correlated in wet deposition with the highest correlation between Cd and Pb in the soluble and total forms. Comparatively smaller correlations were found between these metal fluxes in dry deposition samples. Results of this study showed the importance of metal pollution, especially ecotoxic properties of heavy metals in wet deposition far more than dry deposition.

  10. Production, solubility and antioxidant activity of curcumin nanosuspension

    Directory of Open Access Journals (Sweden)

    Deivis de Moraes Carvalho

    2015-03-01

    Full Text Available Curcumin is a powerful bioactive agent and natural antioxidant, but it is practically water-insoluble and has low bioavailability; a possible solution to this obstacle would be formulations of curcumin nanoparticles. Surfactants such as tween 80 can be used to stabilize low-solubility molecules preventing particle aggregation. The objectives of this study were the preparation of a suspension with curcumin nanoparticles in tween 80, the testing of pure curcumin solubility and of a simple mixture of curcumin with tween 80 and nanosuspension in water and ethanol as solvents, and finally the assessment of the antioxidant activity. We prepared the nanosuspension by injecting a curcumin solution in dichloromethane at low flow in water with tween 80 under heating and ultrasound. The analysis of particles size was conducted through dynamic light scattering; the non-degradation of curcumin was verified through thin-layer chromatography. The analyses of antioxidant activity were carried out according to the DPPH method. The method applied to reduce the particles size was efficient. Both the curcumin suspension and nanosuspension in tween 80 increased its solubility. Curcumin and the formulations presented antioxidant activity.

  11. Modeling the Hydrogen Solubility in Liquid Aluminum Alloys

    Science.gov (United States)

    Harvey, Jean-Philippe; Chartrand, Patrice

    2010-08-01

    The modeling of hydrogen solubility in multicomponent Al-(Li, Mg, Cu, and Si) liquid phase has been performed with a thermodynamic approach using the modified quasichemical model with the pair approximation (MQMPA). All hydrogen solubility data available in literature was assessed critically to obtain the binary parameters of the MQMPA model for the Al-H, Li-H, Mg-H, Cu-H, Zn-H, and Si-H melts. For the Li-H system, a new thermodynamic description of the stable solid lithium hydride was determined based on the c p found in literature. The thermodynamic model for the Al-Li system also was reassessed in this work to take into account the short-range ordering observed for this system. Built-in interpolation techniques allow the model to estimate the thermodynamic properties of the multicomponent liquid solution from the liquid model parameters of the lower order subsystems. A comparison of the calculated hydrogen solubility performed at various equilibrium conditions of temperature, pressure, and composition with the available experimental data found in the literature is presented in this work, as well as a comparison with some results from previous modeling.

  12. Interlaboratory validation of small-scale solubility and dissolution measurements of poorly water-soluble drugs

    DEFF Research Database (Denmark)

    Andersson, Sara B. E.; Alvebratt, Caroline; Bevernage, Jan

    2016-01-01

    The purpose of this study was to investigate the interlaboratory variability in determination of apparent solubility (Sapp) and intrinsic dissolution rate (IDR) using a miniaturized dissolution instrument. Three poorly water-soluble compounds were selected as reference compounds and measured...... showed a need for a standardized protocol including both the experimental assay and the data analysis. Standardization at both these levels decreased the interlaboratory variability. The results also illustrated the difficulties in performing disc IDR on poorly water-soluble drugs because...

  13. “ Enhancement of Solubility of poorly water soluble drug by solid dispersion technique”

    Directory of Open Access Journals (Sweden)

    V.R.Tagalpallewar

    2015-02-01

    Full Text Available Atovaquone and Satrinidazole has poor solubility resulting in low oral absorption hence low oral bioavailability. Hence to improve the solubility of poorly Atovaquone and Satrinidazole , hydrophilic polymers were used to enhance the dissolution by solid dispersion technique. Polyehylene Glycol 4000 and PVP k30 used to enhance the dissolution of both the drug by Solubilisation. Many alternative techniques have been used to improve such bioavailability; this study thus employed the simple solid dispersion technique and incorporated excipients which can increase the bioavailability of these drugs directly enhancing the dissolution rate of the drug and indirectly by reducing particle size.The aim of present work is to enhance the dissolution of poorly water soluble drug by using solid dispersion technique. To improve the dissolution rate, by using the various concentration of carrier or matrix with drug and hence ,improve the bioavailability of poorly water soluble drug by formulating solid dispersion.To enhance the solubility of poorly water soluble drug ,by means of solubilising agent. In case of poorly water soluble drug, dissolution may be the rate limiting step in the process of absorption. In such case ,we can improve their solubility and dissolution rate.To study the effect of surfactant on the solid dispersion of poorly water soluble drug.

  14. Effect of ranitidine on soluble interleukin 2 receptors and CD8 molecules in surgical patients

    DEFF Research Database (Denmark)

    Nielsen, Hans Jørgen; Mynster, T; Jensen, S;

    1994-01-01

    The effect of perioperative immunomodulation with the H2-receptor antagonist ranitidine on postoperative changes in soluble interleukin (IL) 2 receptor and soluble CD8 levels was assessed in 24 patients undergoing major elective abdominal surgery. Eleven patients were randomized to receive...... intravenous ranitidine 100 mg twice daily for 4 days from skin incision, followed by oral ranitidine 150 mg twice daily for a further 5 days; 13 control patients received no ranitidine. Routine blood analysis, clinical data, duration of surgery, anaesthesia, antibiotic prophylaxis and perioperative blood...... transfusion were similar in the two groups. Serum concentrations of soluble IL-2 receptor and CD8 were measured before operation (day 0) and in the morning of postoperative days 1, 3 and 9 using commercial enzyme-linked immunosorbent assay kits. In patients treated with ranitidine, the serum level of soluble...

  15. Impact of selected composition and ripening conditions on CO2 solubility in semi-hard cheese.

    Science.gov (United States)

    Acerbi, F; Guillard, V; Guillaume, C; Gontard, N

    2016-02-01

    Despite CO2 being one of the most important gases affecting the quality of most semi-hard cheeses, the thermodynamic properties of this molecule in relation to cheese ripening have rarely been investigated. In this study the CO2 solubility coefficient was experimentally assessed in semi-hard cheese as a function of the most relevant compositional and ripening variables. As expected, CO2 solubility was found to linearly decrease with temperature in the range 2-25 °C. Unexpectedly, solubility was not significantly different at 39% and 48% moisture, while it was found lower at 42%. Unavoidable changes in protein content of the three cheese variants is suspected to produce an interaction with water content, leading to complex interpretation of the results. Increasing salt content in cheese from 0 to 2.7%w/w significantly decreased CO2 solubility by about 25%, probably due to the increased bonded water molecules in the cheese water phase.

  16. Redefining solubility parameters: the partial solvation parameters.

    Science.gov (United States)

    Panayiotou, Costas

    2012-03-21

    The present work reconsiders a classical and universally accepted concept of physical chemistry, the solubility parameter. Based on the insight derived from modern quantum chemical calculations, a new definition of solubility parameter is proposed, which overcomes some of the inherent restrictions of the original definition and expands its range of applications. The original single solubility parameter is replaced by four partial solvation parameters reflecting the dispersion, the polar, the acidic and the basic character of the chemical compounds as expressed either in their pure state or in mixtures. Simple rules are adopted for the definition and calculation of these four parameters and their values are tabulated for a variety of common substances. In contrast, however, to the well known Hansen solubility parameters, their design and evaluation does not rely exclusively on the basic rule of "similarity matching" for solubility but it makes also use of the other basic rule of compatibility, namely, the rule of "complementarity matching". This complementarity matching becomes particularly operational with the sound definition of the acidic and basic components of the solvation parameter based on the third σ-moments of the screening charge distributions of the quantum mechanics-based COSMO-RS theory. The new definitions are made in a simple and straightforward manner, thus, preserving the strength and appeal of solubility parameter stemming from its simplicity. The new predictive method has been applied to a variety of solubility data for systems of pharmaceuticals and polymers. The results from quantum mechanics calculations are critically compared with the results from Abraham's acid/base descriptors.

  17. In vitro models to evaluate the permeability of poorly soluble drug entities: Challenges and perspectives

    DEFF Research Database (Denmark)

    Buckley, S. T.; Fischer, S. M.; Fricker, G.;

    2012-01-01

    The application of in vitro models in drug permeability studies represents a useful screening tool for assessing the biopharmaceutical appropriateness of new chemical entities (NCEs). Of note, there remains an ever-increasing number of NCEs which exhibit poor aqueous solubility. However, in their...... soluble drugs and critically assess those experimental modifications and solutions employed thus far in terms of their capacity to generate results with improved accuracy and precision. (C) 2011 Elsevier B.V. All rights reserved.......The application of in vitro models in drug permeability studies represents a useful screening tool for assessing the biopharmaceutical appropriateness of new chemical entities (NCEs). Of note, there remains an ever-increasing number of NCEs which exhibit poor aqueous solubility. However...... a more bio-relevant model system which offers good compatibility with poorly soluble compounds. Moreover, in many instances poorly soluble drugs necessitate the inclusion of excipients to facilitate efficient delivery and to enhance their bioavailability. Thus, there exists an increasing demand...

  18. The amorphous solid dispersion of the poorly soluble ABT-102 forms nano/microparticulate structures in aqueous medium: impact on solubility

    Directory of Open Access Journals (Sweden)

    Frank KJ

    2012-11-01

    Full Text Available Kerstin J Frank,1,3 Ulrich Westedt,2 Karin M Rosenblatt,2 Peter Hölig,2 Jörg Rosenberg,2 Markus Mägerlein,2 Gert Fricker,3 Martin Brandl11Department of Physics, Chemistry and Pharmacy, University of Southern Denmark, Odense, Denmark; 2Abbott GmbH and Co. KG, Ludwigshafen, Germany; 3Department of Pharmaceutical Technology, University of Heidelberg, Heidelberg, GermanyAbstract: Amorphous solid dispersions (ASDs are a promising formulation approach for poorly soluble active pharmaceutical ingredients (APIs, because they ideally enhance both dissolution rate and solubility. However, the mechanism behind this is not understood in detail. In the present study, we investigated the supramolecular and the nano/microparticulate structures that emerge spontaneously upon dispersion of an ASD in aqueous medium and elucidated their influence on solubility. The ASD, prepared by hot melt extrusion, contained the poorly soluble ABT-102 (solubility in buffer, 0.05 µg/mL, a hydrophilic polymer, and three surfactants. The apparent solubility of ABT-102 from the ASD-formulation was enhanced up to 200 times in comparison to crystalline ABT-102. At the same time, the molecular solubility, as assessed by inverse equilibrium dialysis, was enhanced two times. Asymmetrical flow field-flow fractionation in combination with a multiangle light-scattering detector, an ultraviolet detector, and a refractometer enabled us to separate and identify the various supramolecular assemblies that were present in the aqueous dispersions of the API-free ASD (placebo and of binary/ternary blends of the ingredients. Thus, the supramolecular assemblies with a molar mass between 20,000 and 90,000 could be assigned to the polyvinylpyrrolidone/vinyl acetate 64, while two other kinds of assemblies were assigned to different surfactant assemblies (micelles. The amount of ABT-102 remaining associated with each of the assemblies upon fractionation was quantified offline with high

  19. Equilibrium Solubility of CO2 in Alkanolamines

    DEFF Research Database (Denmark)

    Waseem Arshad, Muhammad; Fosbøl, Philip Loldrup; von Solms, Nicolas

    2014-01-01

    Equilibrium solubility of CO2 were measured in aqueous solutions of Monoethanolamine (MEA) and N,N-diethylethanolamine(DEEA). Equilibrium cells are generally used for these measurements. In this study, the equilibrium data were measured from the calorimetry. For this purpose a reaction calorimeter...... (model CPA 122 from ChemiSens AB, Sweden) was used. The advantage of this method is being the measurement of both heats of absorption and equilibrium solubility data of CO2 at the same time. The measurements were performed for 30 mass % MEA and 5M DEEA solutions as a function of CO2 loading at three...... different temperatures 40, 80 and 120 ºC. The measured 30 mass % MEA and 5M DEEA data were compared with the literature data obtained from different equilibrium cells which validated the use of calorimeters for equilibrium solubility measurements....

  20. Modeling of Salt Solubilities in Mixed Solvents

    DEFF Research Database (Denmark)

    Chiavone-Filho, O.; Rasmussen, Peter

    2000-01-01

    A method to correlate and predict salt solubilities in mixed solvents using a UNIQUAC+Debye-Huckel model is developed. The UNIQUAC equation is applied in a form with temperature-dependent parameters. The Debye-Huckel model is extended to mixed solvents by properly evaluating the dielectric...... constants and the liquid densities of the solvent media. To normalize the activity coefficients, the symmetric convention is adopted. Thermochemical properties of the salt are used to estimate the solubility product. It is shown that the proposed procedure can describe with good accuracy a series of salt...

  1. Hansen Solubility Parameters for Octahedral Oligomeric Silsesquioxanes

    Science.gov (United States)

    2012-08-28

    referred to as octa(phenethyl), POSS and either polystyrene22 or polyvinyl chloride .23 However, in many cases, the reported solubility of POSS...References 1. Hansen, C. M., Hansen Solubility Parameters: A User’s Handbook . 2nd ed.; CRC Press: Boca Raton, FL, 2007. 2. Vink, P.; Bots, T. L. Formulation ...Acetonitrile 1.82 Fail E- 1.85 Fail E- 2.40 Fail E- Acetone 0.33 Pass E+ 0.58 Pass E+ 1.27 Pass U+ Allyl Chloride 1.64 Fail E- 1.83 Fail E- 1.42 Fail E

  2. Soluble Mediators Regulating Immunity in Early Life

    Directory of Open Access Journals (Sweden)

    Matthew Aaron Pettengill

    2014-09-01

    Full Text Available Soluble factors in blood plasma have a substantial impact on both the innate and adaptive immune responses. The complement system, antibodies, and antimicrobial proteins and peptides (APPs, can directly interact with potential pathogens, protecting against systemic infection. The extracellular environment also has a critical influence on immune cell maturation, activation, and effector functions, and many of the factors in plasma, including hormones, vitamins, and purines, have been shown to influence these processes for leukocytes of both the innate and adaptive immune systems. In this review we give particular consideration to soluble mediators in plasma for which age-dependent differences in abundance may influence the ontogeny of immune function.

  3. Solubilities of krypton and xenon in dichlorodifluoromethane

    Energy Technology Data Exchange (ETDEWEB)

    Shaffer, J.H.; Shockley, W.E.; Greene, C.W.

    1984-07-01

    The solubility behavior of krypton and xenon in dichlorodifluoromethane was investigated for the Consolidated Fuel Reprocessing Program (CFRP) in support of the fluorocarbon absorption process. The solubility data derived from solute radioisotopes had uncertainties of approx. 0.1%. Values for Henry's law constants were initially determined under equilibrium conditions at infinite solute dilution. Based on these results, the study was extended to finite solute concentrations. Nonidealities in the two binary systems were expressed as gas phase fugacity coefficients for each solute at 10/sup 0/ intervals over the range -30 to +50/sup 0/C. 22 references, 4 figures, 2 tables.

  4. Buckminsterfullerene's (C60) octanol-water partition coefficient (Kow) and aqueous solubility.

    Science.gov (United States)

    Jafvert, Chad T; Kulkarni, Pradnya P

    2008-08-15

    To assess the risk and fate of fullerene C60 in the environment, its water solubility and partition coefficients in various systems are useful. In this study, the log Kow of C60 was measured to be 6.67, and the toluene-water partition coefficient was measured at log Ktw = 8.44. From these values and the respective solubilities of C60 in water-saturated octanol and water-saturated toluene, C60's aqueous solubility was calculated at 7.96 ng/L(1.11 x 10(-11) M) for the organic solvent-saturated aqueous phase. Additionally, the solubility of C60 was measured in mixtures of ethanol-water and tetrahydrofuran-water and modeled with Wohl's equation to confirm the accuracy of the calculated solubility value. Results of a generator column experiment strongly support the hypothesis that clusters form at aqueous concentrations below or near this calculated solubility. The Kow value is compared to those of other hydrophobic organic compounds, and bioconcentration factors for C60 were estimated on the basis of Kow.

  5. Highly potent soluble amyloid-β seeds in human Alzheimer brain but not cerebrospinal fluid

    Science.gov (United States)

    Kaeser, Stephan A.; Maia, Luis F.; Portelius, Erik; Pinotsi, Dorothea; Kaminski, Clemens F.; Winkler, David T.; Maetzler, Walter; Keyvani, Kathy; Spitzer, Philipp; Wiltfang, Jens; Kaminski Schierle, Gabriele S.; Zetterberg, Henrik; Staufenbiel, Matthias; Jucker, Mathias

    2017-01-01

    The soluble fraction of brain samples from patients with Alzheimer’s disease contains highly biologically active amyloid-β seeds. In this study, we sought to assess the potency of soluble amyloid-β seeds derived from the brain and cerebrospinal fluid. Soluble Alzheimer’s disease brain extracts were serially diluted and then injected into the hippocampus of young, APP transgenic mice. Eight months later, seeded amyloid-β deposition was evident even when the hippocampus received subattomole amounts of brain-derived amyloid-β. In contrast, cerebrospinal fluid from patients with Alzheimer’s disease, which contained more than 10-fold higher levels of amyloid-β peptide than the most concentrated soluble brain extracts, did not induce detectable seeding activity in vivo. Similarly, cerebrospinal fluid from aged APP-transgenic donor mice failed to induce cerebral amyloid-β deposition. In comparison to the soluble brain fraction, cerebrospinal fluid largely lacked N-terminally truncated amyloid-β species and exhibited smaller amyloid-β-positive particles, features that may contribute to the lack of in vivo seeding by cerebrospinal fluid. Interestingly, the same cerebrospinal fluid showed at least some seeding activity in an in vitro assay. The present results indicate that the biological seeding activity of soluble amyloid-β species is orders of magnitude greater in brain extracts than in the cerebrospinal fluid. PMID:25212850

  6. Constraints on soluble aerosol iron flux to the Southern Ocean at the Last Glacial Maximum

    Science.gov (United States)

    Conway, T. M.; Wolff, E. W.; Röthlisberger, R.; Mulvaney, R.; Elderfield, H. E.

    2015-07-01

    Relief of iron (Fe) limitation in the Southern Ocean during ice ages, with potentially increased carbon storage in the ocean, has been invoked as one driver of glacial-interglacial atmospheric CO2 cycles. Ice and marine sediment records demonstrate that atmospheric dust supply to the oceans increased by up to an order of magnitude during glacial intervals. However, poor constraints on soluble atmospheric Fe fluxes to the oceans limit assessment of the role of Fe in glacial-interglacial change. Here, using novel techniques, we present estimates of water- and seawater-soluble Fe solubility in Last Glacial Maximum (LGM) atmospheric dust from the European Project for Ice Coring in Antarctica (EPICA) Dome C and Berkner Island ice cores. Fe solubility was very variable (1-42%) during the interval, and frequently higher than typically assumed by models. Soluble aerosol Fe fluxes to Dome C at the LGM (0.01-0.84 mg m-2 per year) suggest that soluble Fe deposition to the Southern Ocean would have been >=10 × modern deposition, rivalling upwelling supply.

  7. Connecting the solubility and CCN activation of complex organic aerosols: a theoretical study using solubility distributions

    Science.gov (United States)

    Riipinen, I.; Rastak, N.; Pandis, S. N.

    2015-06-01

    We present a theoretical study investigating the cloud activation of multicomponent organic particles. We modeled these complex mixtures using solubility distributions (analogous to volatility distributions in the VBS, i.e., volatility basis set, approach), describing the mixture as a set of surrogate compounds with varying water solubilities in a given range. We conducted Köhler theory calculations for 144 different mixtures with varying solubility range, number of components, assumption about the organic mixture thermodynamics and the shape of the solubility distribution, yielding approximately 6000 unique cloud condensation nucleus (CCN)-activation points. The results from these comprehensive calculations were compared to three simplifying assumptions about organic aerosol solubility: (1) complete dissolution at the point of activation; (2) combining the aerosol solubility with the molar mass and density into a single effective hygroscopicity parameter κ; and (3) assuming a fixed water-soluble fraction ϵeff. The complete dissolution was able to reproduce the activation points with a reasonable accuracy only when the majority (70-80%) of the material was dissolved at the point of activation. The single-parameter representations of complex mixture solubility were confirmed to be powerful semi-empirical tools for representing the CCN activation of organic aerosol, predicting the activation diameter within 10% in most of the studied supersaturations. Depending mostly on the condensed-phase interactions between the organic molecules, material with solubilities larger than about 0.1-100 g L-1 could be treated as soluble in the CCN activation process over atmospherically relevant particle dry diameters and supersaturations. Our results indicate that understanding the details of the solubility distribution in the range of 0.1-100 g L-1 is thus critical for capturing the CCN activation, while resolution outside this solubility range will probably not add

  8. Levels of soluble VCAM-1, soluble ICAM-1, and soluble E-selectin in patients with tuberculous pleuritis

    Directory of Open Access Journals (Sweden)

    A. Hamzaoui

    1996-01-01

    Full Text Available Tuberculosis is characterized by the presence of activated mononuclear cells both in the peripheral circulation and in pleural fluid. Expression and up-regulation of adhesion molecules is the basis of cell-cell adhesion in granuloma formation and in leukocyte migration to the inflammatory site. Soluble isoforms of adhesion molecules have been described, and their expression at high levels indicated an activated state. The purpose of this study was to evaluate levels of soluble adhesion molecules in serum and pleural fluid from patients with tuberculous pleural effusions, compared with non-tuberculous pleural effusions. We analysed levels of soluble vascular cell adhesion molecule-1 (s.VCAM-1, soluble intercellular adhesion molecule-1 (s.ICAM-1, and soluble E-selectin (sE-selectin in serum and pleural fluid from patients with tuberculous pleuritis, by sandwich ELISA. Serum levels of s.ICAM-1 and s.VCAM-1 in patients with tuberculosis were higher than those in healthy controls (p < 0.001. Levels of sE-selectin levels were in the normal range compared with control groups. In pleural fluid, levels of s.VCAM-1 and s.ICAM-1 were increased in pleural effusions. Patients with tuberculous pleural effusion exhibited high levels of s.ICAM-1 compared with patients with neoplastic pleural involvement. Up-regulation of s.VCAM-1 and s.ICAM-1 in serum, along with increased levels of sE-selectin in pleural effusions from tuberculous patients, may result in transmigration of activated inflammatory cells inducing pleural damage, which may contribute to the pathological processes involved.

  9. A new expanded solubility parameter approach.

    Science.gov (United States)

    Stefanis, Emmanuel; Panayiotou, Costas

    2012-04-15

    The partial or Hansen solubility parameters (HSP) are important properties of the various substances and very useful tools for the selection of their solvents or the prediction of their behaviour in numerous applications. Their design and evaluation relies on the basic rule of "similarity matching" for solubility. The present work attempts to enhance the capacity of HSPs by incorporating into their evaluation the other basic rule of solubility, namely, the rule of "complementarity matching". This is done in a simple and straightforward manner by splitting the hydrogen bonding HSP into its acidic or proton donor component and its basic or proton acceptor one. The splitting is based on the third σ-moments of the screening charge distributions or sigma profiles of the quantum-mechanics based COSMO-RS theory. The whole development and application does not involve any sophisticated calculations or any strong specific background. The new method has been applied to a variety of solubility data for systems of pharmaceutical interest in order to verify the significant improvement over the classical HSP approach. The application of the new method requires, of course, the knowledge of the HSPs. For this reason, in Appendix A is presented an updated version of a robust and reliable group-contribution method for the calculation of the HSPs. The key features of this combined tool are critically discussed.

  10. Water-soluble polymers and compositions thereof

    Science.gov (United States)

    Smith, B.F.; Robison, T.W.; Gohdes, J.W.

    1999-04-06

    Water-soluble polymers including functionalization from the group of amino groups, carboxylic acid groups, phosphonic acid groups, phosphonic ester groups, acylpyrazolone groups, hydroxamic acid groups, aza crown ether groups, oxy crown ethers groups, guanidinium groups, amide groups, ester groups, aminodicarboxylic groups, permethylated polyvinylpyridine groups, permethylated amine groups, mercaptosuccinic acid groups, alkyl thiol groups, and N-alkylthiourea groups are disclosed.

  11. Monocyte/macrophage-derived soluble CD163

    DEFF Research Database (Denmark)

    Andersen, Morten N; Abildgaard, Niels; Maniecki, Maciej B;

    2014-01-01

    OBJECTIVES: Macrophages play an important role in cancer by suppression of adaptive immunity and promotion of angiogenesis and metastasis. Tumor-associated macrophages strongly express the hemoglobin scavenger receptor CD163, which can also be found as a soluble protein in serum and other body fl...

  12. Enhancement of solubility and dissolution rate of poorly water soluble raloxifene using microwave induced fusion method

    OpenAIRE

    Payal Hasmukhlal Patil; Veena Sailendra Belgamwar; Pratibha Ramratan Patil; Sanjay Javerilal Surana

    2013-01-01

    The objective of the present work was to enhance the solubility and dissolution rate of the drug raloxifene HCl (RLX), which is poorly soluble in water. The solubility of RLX was observed to increase with increasing concentration of hydroxypropyl methylcellulose (HPMC E5 LV). The optimized ratio for preparing a solid dispersion (SD) of RLX with HPMC E5 LV using the microwave-induced fusion method was 1:5 w/w. Microwave energy was used to prepare SDs. HPMC E5 LV was used as a hydrophilic carri...

  13. Anhydrite solubility in differentiated arc magmas

    Science.gov (United States)

    Masotta, M.; Keppler, H.

    2015-06-01

    The solubility of anhydrite in differentiated arc magmas was experimentally studied at 200 MPa and 800-1000 °C over a range of oxygen fugacities, from 0.5 log units above the Ni-NiO buffer to the hematite-magnetite buffer. Anhydrite is stable only at oxidizing conditions (fO2 ⩾ Re-ReO2), whereas sulfides only form under reducing conditions. The solubility of anhydrite in the melt ultimately regulates the amount of sulfur available to partition between melt and fluid phase during the eruption. At oxidizing conditions, the solubility product of anhydrite increases with temperature, nbo/t and melt water content. We provide a new calibration of the anhydrite solubility product (KSP = XCaO * XSO3), which reproduces all available experimental data with greatly improved accuracy: In this equation, the molar fractions XCaO and XSO3 in the melt as well as the number of non-bridging oxygen atoms per tetrahedron (nbo/t) are calculated on an anhydrous basis (H2O refers to the melt water content, T is temperature in Kelvin). We apply our model to estimate the sulfur yield of some recent volcanic eruptions and we show that the sulfur yield of the 1991 Mt. Pinatubo dacite eruption was unusually large, because only a small fraction of the sulfur was locked up in anhydrite. In general, high sulfur yields are expected when anhydrite solubility in the melt is high, i.e. for somewhat depolymerized melts. For rhyolitic systems, most of the available sulfur will be locked up in anhydrite, so that even very large eruptions may only have a small effect on global surface temperatures. Our model therefore allows improved predictions of the environmental impact of explosive volcanic eruptions.

  14. Scoring function to predict solubility mutagenesis

    Directory of Open Access Journals (Sweden)

    Deutsch Christopher

    2010-10-01

    Full Text Available Abstract Background Mutagenesis is commonly used to engineer proteins with desirable properties not present in the wild type (WT protein, such as increased or decreased stability, reactivity, or solubility. Experimentalists often have to choose a small subset of mutations from a large number of candidates to obtain the desired change, and computational techniques are invaluable to make the choices. While several such methods have been proposed to predict stability and reactivity mutagenesis, solubility has not received much attention. Results We use concepts from computational geometry to define a three body scoring function that predicts the change in protein solubility due to mutations. The scoring function captures both sequence and structure information. By exploring the literature, we have assembled a substantial database of 137 single- and multiple-point solubility mutations. Our database is the largest such collection with structural information known so far. We optimize the scoring function using linear programming (LP methods to derive its weights based on training. Starting with default values of 1, we find weights in the range [0,2] so that predictions of increase or decrease in solubility are optimized. We compare the LP method to the standard machine learning techniques of support vector machines (SVM and the Lasso. Using statistics for leave-one-out (LOO, 10-fold, and 3-fold cross validations (CV for training and prediction, we demonstrate that the LP method performs the best overall. For the LOOCV, the LP method has an overall accuracy of 81%. Availability Executables of programs, tables of weights, and datasets of mutants are available from the following web page: http://www.wsu.edu/~kbala/OptSolMut.html.

  15. HYDROTROPY: A PROMISING TOOL FOR SOLUBILITY ENHANCEMENT: A REVIEW

    Directory of Open Access Journals (Sweden)

    Kapadiya Nidhi

    2011-06-01

    Full Text Available The study on solubility yields information about the structure and intermolecular forces of drugs. Use of the solubility characteristics in bioavailability, pharmacological action and solubility enhancement of various poorly soluble compounds is a challenging task for researchers and pharmaceutical scientists. Hydrotropy is one of the solubility enhancement techniques which enhance solubility to many folds with use of hydrotropes like sodium benzoate, sodium citrate, urea, niacinamide etc. and have many advantages like; it does not require chemical modification of hydrophobic drugs, use of organic solvents, or preparation of emulsion system etc.

  16. Solubility Enhancement of a Poorly Water Soluble Drug by Forming Solid Dispersions using Mechanochemical Activation

    Science.gov (United States)

    Rojas-Oviedo, I.; Retchkiman-Corona, B.; Quirino-Barreda, C. T.; Cárdenas, J.; Schabes-Retchkiman, P. S.

    2012-01-01

    Mechanochemical activation is a practical cogrinding operation used to obtain a solid dispersion of a poorly water soluble drug through changes in the solid state molecular aggregation of drug-carrier mixtures and the formation of noncovalent interactions (hydrogen bonds) between two crystalline solids such as a soluble carrier, lactose, and a poorly soluble drug, indomethacin, in order to improve its solubility and dissolution rate. Samples of indomethacin and a physical mixture with a weight ratio of 1:1 of indomethacin and lactose were ground using a high speed vibrating ball mill. Particle size was determined by electron microscopy, the reduction of crystallinity was determined by calorimetry and transmission electron microscopy, infrared spectroscopy was used to find evidence of any interactions between the drug and the carrier and the determination of apparent solubility allowed for the corroboration of changes in solubility. Before grinding, scanning electron microscopy showed the drug and lactose to have an average particle size of around 50 and 30 μm, respectively. After high speed grinding, indomethacin and the mixture had a reduced average particle size of around 5 and 2 μm, respectively, showing a morphological change. The ground mixture produced a solid dispersion that had a loss of crystallinity that reached 81% after 30 min of grinding while the drug solubility of indomethacin within the solid dispersion increased by 2.76 fold as compared to the pure drug. Drug activation due to hydrogen bonds between the carboxylic group of the drug and the hydroxyl group of lactose as well as the decrease in crystallinity of the solid dispersion and the reduction of the particle size led to a better water solubility of indomethacin. PMID:23798775

  17. Biorelevant solubility of poorly soluble drugs: rivaroxaban, furosemide, papaverine and niflumic acid.

    Science.gov (United States)

    Takács-Novák, Krisztina; Szőke, Vera; Völgyi, Gergely; Horváth, Péter; Ambrus, Rita; Szabó-Révész, Piroska

    2013-09-01

    In this work the biorelevant solubility of four drugs representing different acid-base property, wide range of lipohilicity and low aqueous solubility was studied. The equilibrium solubility of rivaroxaban (non-ionizable), furosemide (acid), papaverine (base) and niflumic acid (ampholyte) was determined in simulated gastric fluid (SGF pH 1.2), in simulated intestinal fluid fasted state (FaSSIF pH 6.5) and fed state (FeSSIF pH 5.0) and their corresponding blank buffers at a temperature of 37 °C using saturation shake-flask method. The concentration was measured by optimized HPLC analysis. The solubilizing effect of bile acid/lipid micelles as additive components of biorelevent media (BRM) is expressed with the solubility ratio (SR: SBRM/Sblank buffer) and the food effect was estimated from SFeSSIF/SFaSSIF coefficient. It was revealed that ionization plays primarily role in solubility of compounds which undergo ionization in BRM. The solubilizing effect in FaSSIF was marginal for the neutral compound (rivaroxaban) and for molecules are anionic at pH 6.5 (furosemide and niflumic acid). The higher concentration of solubilizing agents in FeSSIF improved the solubility of papaverine carrying positive charge and niflumic acid being partially zwitterionic at pH 5.0.

  18. Enhancement of solubility and dissolution rate of poorly water soluble raloxifene using microwave induced fusion method

    Directory of Open Access Journals (Sweden)

    Payal Hasmukhlal Patil

    2013-09-01

    Full Text Available The objective of the present work was to enhance the solubility and dissolution rate of the drug raloxifene HCl (RLX, which is poorly soluble in water. The solubility of RLX was observed to increase with increasing concentration of hydroxypropyl methylcellulose (HPMC E5 LV. The optimized ratio for preparing a solid dispersion (SD of RLX with HPMC E5 LV using the microwave-induced fusion method was 1:5 w/w. Microwave energy was used to prepare SDs. HPMC E5 LV was used as a hydrophilic carrier to enhance the solubility and dissolution rate of RLX. After microwave treatment, the drug and hydrophilic polymer are fused together, and the drug is converted from the crystalline form into an amorphous form. This was confirmed through scanning electron microscopy (SEM, differential scanning calorimetry (DSC and powder X-ray diffraction (PXRD studies. These results suggested that the microwave method is a simple and efficient method of preparing SDs. The solubility and dissolution rate of the SDs were increased significantly compared with pure RLX due to the surfactant and wetting properties of HPMC E5 LV and the formation of molecular dispersions of the drug in HPMC E5 LV. It was concluded that the solubility and dissolution rate of RLX are increased significantly when an SD of the drug is prepared using the microwave-induced fusion method.

  19. C-104 high-level waste solids: Washing/leaching and solubility versus temperature studies

    Energy Technology Data Exchange (ETDEWEB)

    GJ Lumetta; DJ Bates; JP Bramson; LP Darnell; OT Farmer III; SK Fiskum; LR Greenwood; FV Hoopes; CZ Soderquist; MJ Steele; RT Steele; MW Urie; JJ Wagner

    2000-05-17

    This report describes the results of a test conducted by Battelle to assess the effects of inhibited water washing and caustic leaching on the composition of the C-104 HLW solids. The objective of this work was to determine the composition of the C-104 solids remaining after washing with 0.01 M NaOH or leaching with 3 M NaOH. Another objective of this test was to determine the solubility of the C-104 solids as a function of temperature. The work was conducted according to test plan BNFL-TP-29953-8, Rev. 0, ``Determination of the Solubility of HLW Sludge Solids.

  20. Effect of ranitidine on soluble interleukin 2 receptors and CD8 molecules in surgical patients

    DEFF Research Database (Denmark)

    Nielsen, Hans Jørgen; Mynster, T; Jensen, S

    1994-01-01

    The effect of perioperative immunomodulation with the H2-receptor antagonist ranitidine on postoperative changes in soluble interleukin (IL) 2 receptor and soluble CD8 levels was assessed in 24 patients undergoing major elective abdominal surgery. Eleven patients were randomized to receive...... intravenous ranitidine 100 mg twice daily for 4 days from skin incision, followed by oral ranitidine 150 mg twice daily for a further 5 days; 13 control patients received no ranitidine. Routine blood analysis, clinical data, duration of surgery, anaesthesia, antibiotic prophylaxis and perioperative blood...

  1. Benzodicarbomethoxytetrathiafulvalene derivatives as soluble organic semiconductors.

    Science.gov (United States)

    Otón, Francisco; Pfattner, Raphael; Oxtoby, Neil S; Mas-Torrent, Marta; Wurst, Klaus; Fontrodona, Xavier; Olivier, Yoann; Cornil, Jérôme; Veciana, Jaume; Rovira, Concepció

    2011-01-07

    A series of new tetrathiafulvalene (TTF) derivatives bearing dimethoxycarbonyl and phenyl or phthalimidyl groups fused to the TTF core (6 and 15-18) has been synthesized as potential soluble semiconductor materials for organic field-effect transistors (OFETs). The electron-withdrawing substituents lower the energy of the HOMO and LUMO levels and increase the solubility and stability of the semiconducting material. Crystal structures of all new TTF derivatives are also described, and theoretical DFT calculations were carried out to study the potential of the crystals to be used in OFET. In the experimental study, the best performing device exhibited a hole mobility up to 7.5 × 10(-3) cm(2) V(-1) s(-1)).

  2. Soluble organic nanotubes for catalytic systems

    Science.gov (United States)

    Xiong, Linfeng; Yang, Kunran; Zhang, Hui; Liao, Xiaojuan; Huang, Kun

    2016-03-01

    In this paper, we report a novel method for constructing a soluble organic nanotube supported catalyst system based on single-molecule templating of core-shell bottlebrush copolymers. Various organic or metal catalysts, such as sodium prop-2-yne-1-sulfonate (SPS), 1-(2-(prop-2-yn-1-yloxy)ethyl)-1H-imidazole (PEI) and Pd(OAc)2 were anchored onto the tube walls to functionalize the organic nanotubes via copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. Depending on the ‘confined effect’ and the accessible cavity microenvironments of tubular structures, the organic nanotube catalysts showed high catalytic efficiency and site-isolation features. We believe that the soluble organic nanotubes will be very useful for the development of high performance catalyst systems due to their high stability of support, facile functionalization and attractive textural properties.

  3. Preparation of Hydrochlorothiazide Nanoparticles for Solubility Enhancement

    Directory of Open Access Journals (Sweden)

    Eliska Vaculikova

    2016-08-01

    Full Text Available Nanoparticles can be considered as a useful tool for improving properties of poorly soluble active ingredients. Hydrochlorothiazide (Class IV of the Biopharmaceutical Classification System was chosen as a model compound. Antisolvent precipitation-solvent evaporation and emulsion solvent evaporation methods were used for preparation of 18 samples containing hydrochlorothiazide nanoparticles. Water solutions of surfactants sodium dodecyl sulfate, Tween 80 and carboxymethyl dextran were used in mass concentrations of 1%, 3% and 5%. Acetone and dichloromethane were used as solvents of the model compound. The particle size of the prepared samples was measured by dynamic light scattering. The selected sample of hydrochlorothiazide nanoparticles stabilized with carboxymethyl dextran sodium salt with particle size 2.6 nm was characterized additionally by Fourier transform mid-infrared spectroscopy and scanning electron microscopy. It was found that the solubility of this sample was 6.5-fold higher than that of bulk hydrochlorothiazide.

  4. Biochemical synthesis of water soluble conducting polymers

    Science.gov (United States)

    Bruno, Ferdinando F.; Bernabei, Manuele

    2016-05-01

    An efficient biomimetic route for the synthesis of conducting polymers/copolymers complexed with lignin sulfonate and sodium (polystyrenesulfonate) (SPS) will be presented. This polyelectrolyte assisted PEG-hematin or horseradish peroxidase catalyzed polymerization of pyrrole (PYR), 3,4 ethyldioxithiophene (EDOT) and aniline has provided a route to synthesize water-soluble conducting polymers/copolymers under acidic conditions. The UV-vis, FTIR, conductivity and cyclic voltammetry studies for the polymers/copolymer complex indicated the presence of a thermally stable and electroactive polymers. Moreover, the use of water-soluble templates, used as well as dopants, provided a unique combination of properties such as high electronic conductivity, and processability. These polymers/copolymers are nowadays tested/evaluated for antirust features on airplanes and helicopters. However, other electronic applications, such as photovoltaics, for transparent conductive polyaniline, actuators, for polypyrrole, and antistatic films, for polyEDOT, will be proposed.

  5. Influence of Polymer Molecular Weight on Drug-Polymer Solubility

    DEFF Research Database (Denmark)

    Knopp, Matthias Manne; Olesen, Niels Erik; Holm, Per

    2015-01-01

    In this study, the influence of polymer molecular weight on drug-polymer solubility was investigated using binary systems containing indomethacin (IMC) and polyvinylpyrrolidone (PVP) of different molecular weights. The experimental solubility in PVP, measured using a differential scanning...... calorimetry annealing method, was compared with the solubility calculated from the solubility of the drug in the liquid analogue N-vinylpyrrolidone (NVP). The experimental solubility of IMC in the low-molecular-weight PVP K12 was not significantly different from that in the higher molecular weight PVPs (K25......, K30, and K90). The calculated solubilities derived from the solubility in NVP (0.31-0.32 g/g) were found to be lower than those experimentally determined in PVP (0.38-0.40 g/g). Nevertheless, the similarity between the values indicates that the analogue solubility can provide valuable indications...

  6. Water soluble azido polyisocyanopeptides as functional β-sheet mimics

    NARCIS (Netherlands)

    Schwartz, Erik; Koepf, Matthieu; Kitto, Heather J.; Espelt, Mónica; Nebot-Carda, Vicent J.; Gelder, de Rene; Nolte, Roeland J.M.; Cornelissen, Jeroen J.L.M.; Rowan, Alan E.

    2009-01-01

    The design and synthesis of functional biomimetic water soluble polymers with a defined secondary structure has been developed using β-sheet polyisocyanopeptide scaffolds. Water soluble isocyanopolymers were prepared by random copolymerisation of the azido functionalized isocyanopeptides with nonfun

  7. Thermal degradation of organo-soluble polyimides

    Institute of Scientific and Technical Information of China (English)

    黄俐研; 史燚; 金熹高

    1999-01-01

    The thermal degradation behavior of two organo-soluble polyimides was investigated by high resolution pyrolysis-gas chromatography/mass spectrometry. The pyrolyzates of the polymers at various temperatures were identified and characterized quantitatively. The relationship between the polymer structure and pyrolyzate distribution was discussed. The kinetic parameters of the thermal degradation were calculated based on thermogravimetric measurements. Finally, the thermal degradation mechanism for the polymers was suggested.

  8. Chlorine solubility in evolved alkaline magmas

    Directory of Open Access Journals (Sweden)

    M. R. Carroll

    2005-06-01

    Full Text Available Experimental studies of Cl solubility in trachytic to phonolitic melts provide insights into the capacity of alkaline magmas to transport Cl from depth to the earth?s surface and atmosphere, and information on Cl solubility variations with pressure, temperature and melt or fluid composition is crucial for understanding the reasons for variations in Cl emissions at active volcanoes. This paper provides a brief review of Cl solubility experiments conducted on a range of trachytic to phonolitic melt compositions. Depending on the experimental conditions the melts studied were in equilibrium with either a Cl-bearing aqueous fluid or a subcritical assemblage of low- Cl aqueous fluid + Cl-rich brine. The nature of the fluid phase(s was identified by examination of fluid inclusions present in run product glasses and the fluid bulk composition was calculated by mass balance. Chlorine concentrations in the glass increase with increasing Cl molality in the fluid phase until a plateau in Cl concentration is reached when melt coexists with aqueous fluid + brine. With fluids of similar Cl molality, higher Cl concentrations are observed in peralkaline phonolitic melts compared with peraluminous phonolitic melts; overall the Cl concentrations observed in phonolitic and trachytic melts are approximately twice those found in calcalkaline rhyolitic melts under similar conditions. The observed negative pressure dependence of Cl solubility implies that Cl contents of melts may actually increase during magma decompression if the magma coexists with aqueous fluid and Cl-rich brine (assuming melt-vapor equilibrium is maintained. The high Cl contents (approaching 1 wt% Cl observed in some melts/glasses from the Vesuvius and Campi Flegrei areas suggest saturation with a Cl-rich brine prior to eruption.

  9. Influence of measurement uncertainties on fractional solubility of iron in mineral aerosols over the oceans

    Science.gov (United States)

    Meskhidze, Nicholas; Johnson, Matthew S.; Hurley, David; Dawson, Kyle

    2016-09-01

    The atmospheric supply of mineral dust iron (Fe) plays a crucial role in the Earth's biogeochemical cycle and is of specific importance as a micronutrient in the marine environment. Observations show several orders of magnitude variability in the fractional solubility of Fe in mineral dust aerosols, making it hard to assess the role of mineral dust in the global ocean biogeochemical Fe cycle. In this study we compare the operational solubility of mineral dust aerosol Fe associated with the flow-through leaching protocol to the results of the global 3-D chemical transport model GEOS-Chem. According to the protocol, aerosol Fe is defined as soluble by first deionized water leaching of mineral dust through a 0.45 μm pore size membrane followed by acidification and storage of the leachate over a long period of time prior to analysis. To estimate the uncertainty in soluble Fe results introduced by the flow-through leaching protocol, we prescribe an average 50% (range of 30-70%) fractional solubility to sub-0.45 μm sized mineral dust particles that may inadvertently pass the filter and end up in the acidified (at pH ∼ 1.7) leachate for a couple of month period. In the model, the fractional solubility of Fe is either explicitly calculated using a complex mineral aerosol Fe dissolution equations, or prescribed to be 1% and 4% often used by global ocean biogeochemical Fe cycle models to reproduce the broad characteristics of the presently observed ocean dissolved iron distribution. Calculations show that the fractional solubility of Fe derived through the flow-through leaching is higher compared to the model results. The largest differences (∼40%) are predicted to occur farther away from the dust source regions, over the areas where sub-0.45 μm sized mineral dust particles contribute a larger fraction of the total mineral dust mass. This study suggests that different methods used in soluble Fe measurements and inconsistences in the operational definition of

  10. Study of serum Helicobacter pylori soluble antigen

    Institute of Scientific and Technical Information of China (English)

    吴勤动; 朱永良

    2002-01-01

    Objective:to explore a new serological method for detecting Helicobacter pylori(H.pylori) infection.Methods:Serum soluble antigen of H.pylori was detected by using avidin-biotin ELISA technique to evaluate the status of H.pylori infection and for comparison with rapid urease test(RUT).histologic examination and serology,Results:The sensitivity,specificity,positive predictive value and negative predictive value were 77.46% ,91.07%,91.67% and 76.12%,respectively.The prevalence rate of werum H. pylori soluble antigen in 138 patients undergong endoscopy was similar to the rate obtained by 14 C-UBT methods(P>0.05).Conclusions:The detection of serum H.pylori soluble antigen(HpSAg) could be used as a new serological method which is accurate,and convenient,not affected by the memorizing raction of serum antibody;is more sensitive,more specific and suitable for dinical diagriosis,and evaluation of eradication and for follow-up of H.pylori as well as for detection in children and pregnant women.

  11. Vacuole/extravacuole distribution of soluble protease in Hippeastrum petal and Triticum leaf protoplasts

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, G.J.; Mulready, P.; Cutt, J.

    1981-11-01

    The subcellular distribution of soluble protease in anthesis-stage, anthocyanin-containing Hippeastrum cv. Dutch Red Hybrid petal protoplasts has been reevaluated and that of Triticum aestivum L. var. Red Coat leaf protoplasts determined using /sup 125/I-fibrin as a protease substrate and improved methods for protoplast and vacuole volume estimation. Results indicate that about 20% of the Hippeastrum petal-soluble protease and about 90% of the wheat leaf-soluble protease can be assigned to the vacuole. Protoplast isolation enzyme labeled with /sup 125/I has been used to assess the efficiency of removing isolation enzyme from protoplasts by repeated washing and by separation of protoplasts from debris using density centrifugation. Results of these studies suggest that protoplasts prepared by both methods retain low levels of isolation enzyme. However, when protoplasts prepared by either method were lysed with washing medium lacking osmoticum, little isolation enzyme contaminated the lysates.

  12. CHANGES OF SOLUBLE FAS AND SOLUBLE FAS LIGAND IN SERUM AND PERITONEAL FLUID OF INFERTILE PATIENTS WITH ENDOMETRIOSIS

    Institute of Scientific and Technical Information of China (English)

    令狐华; 徐小蓉; 骆建云; 庄琳

    2004-01-01

    Objective To evaluate the relationship between levels of soluble Fas (sFas) and soluble Fas ligand (sFasL) in serum and peritoneal fluid of endometriosis-associated infertility.Methods The soluble Fas ligand and soluble Fas levels in serum and peritoneal fluid of 20infertile patients with endometriosis were assessed with enzyme-linked immunosorbent assay, and were compared with 14 infertile patients due to chronic pelvic infectious disease and 16 fertile controls. Results The sFasL levels were significantly higher in infertile patients with endometriosis (175.09 ±80.55 pg/mL in serum and 284.50 ± 152.38 pg/mL in peritoneal fluid) than those of infertile controls (88.47±43.55 pg/mL in serum and 17.30±9.62 pg/mL in peritoneal fluid) and fertile controls (16.13 ±11.75 pg/mL in serum and 8.84 ± 2.31 pg/mL in peritoneal fluid). In contrast, as for the sFas levels, infertile patients with endometriosis (828.60±429.65 pg/mL in serum and 349.61 ±288.89 pg/mL in peritoneal fluid) did not show any significant difference compared with those in infertile patients resulting from pelvic infectious disease (868.75 ± 570.48 pg/mL in serum and 181.76 ± 157.78 pg/mL in peritoneal fluid) and fertile control (822.26± 129.12 pg/mL in serum and 318.42 ± 145.16 pg/mL in peritoneal fluid). Conclusions Based upon these results, high level of sFasL in serum and peritoneal fluid and thus apoptosis mediated by it may be implicated in the mechanism involved in endometriosis-related infertility.

  13. Functional characterization of two scFv-Fc antibodies from an HIV controller selected on soluble HIV-1 Env complexes: a neutralizing V3- and a trimer-specific gp41 antibody.

    Directory of Open Access Journals (Sweden)

    Maria Trott

    Full Text Available HIV neutralizing antibodies (nAbs represent an important tool in view of prophylactic and therapeutic applications for HIV-1 infection. Patients chronically infected by HIV-1 represent a valuable source for nAbs. HIV controllers, including long-term non-progressors (LTNP and elite controllers (EC, represent an interesting subgroup in this regard, as here nAbs can develop over time in a rather healthy immune system and in the absence of any therapeutic selection pressure. In this study, we characterized two particular antibodies that were selected as scFv antibody fragments from a phage immune library generated from an LTNP with HIV neutralizing antibodies in his plasma. The phage library was screened on recombinant soluble gp140 envelope (Env proteins. Sequencing the selected peptide inserts revealed two major classes of antibody sequences. Binding analysis of the corresponding scFv-Fc derivatives to various trimeric and monomeric Env constructs as well as to peptide arrays showed that one class, represented by monoclonal antibody (mAb A2, specifically recognizes an epitope localized in the pocket binding domain of the C heptad repeat (CHR in the ectodomain of gp41, but only in the trimeric context. Thus, this antibody represents an interesting tool for trimer identification. MAb A7, representing the second class, binds to structural elements of the third variable loop V3 and neutralizes tier 1 and tier 2 HIV-1 isolates of different subtypes with matching critical amino acids in the linear epitope sequence. In conclusion, HIV controllers are a valuable source for the selection of functionally interesting antibodies that can be selected on soluble gp140 proteins with properties from the native envelope spike.

  14. The Hildebrand Solubility Parameters of Ionic Liquids—Part 2

    Directory of Open Access Journals (Sweden)

    Andrzej Marciniak

    2011-06-01

    Full Text Available The Hildebrand solubility parameters have been calculated for eight ionic liquids. Retention data from the inverse gas chromatography measurements of the activity coefficients at infinite dilution were used for the calculation. From the solubility parameters, the enthalpies of vaporization of ionic liquids were estimated. Results are compared with solubility parameters estimated by different methods.

  15. 21 CFR 520.2087 - Roxarsone soluble powder.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Roxarsone soluble powder. 520.2087 Section 520...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS ORAL DOSAGE FORM NEW ANIMAL DRUGS § 520.2087 Roxarsone soluble powder. (a) Specifications. Each ounce (avoirdupois) of soluble powder contains 21.7 grams of...

  16. Mirabilite solubility in equilibrium sea ice brines

    Science.gov (United States)

    Butler, Benjamin Miles; Papadimitriou, Stathys; Santoro, Anna; Kennedy, Hilary

    2016-06-01

    The sea ice microstructure is permeated by brine channels and pockets that contain concentrated seawater-derived brine. Cooling the sea ice results in further formation of pure ice within these pockets as thermal equilibrium is attained, resulting in a smaller volume of increasingly concentrated residual brine. The coupled changes in temperature and ionic composition result in supersaturation of the brine with respect to mirabilite (Na2SO4·10H2O) at temperatures below -6.38 °C, which consequently precipitates within the sea ice microstructure. Here, mirabilite solubility in natural and synthetic seawater derived brines, representative of sea ice at thermal equilibrium, has been measured in laboratory experiments between 0.2 and -20.6 °C, and hence we present a detailed examination of mirabilite dynamics within the sea ice system. Below -6.38 °C mirabilite displays particularly large changes in solubility as the temperature decreases, and by -20.6 °C its precipitation results in 12.90% and 91.97% reductions in the total dissolved Na+ and SO42- concentrations respectively, compared to that of conservative seawater concentration. Such large non-conservative changes in brine composition could potentially impact upon the measurement of sea ice brine salinity and pH, whilst the altered osmotic conditions may create additional challenges for the sympagic organisms that inhabit the sea ice system. At temperatures above -6.38 °C, mirabilite again displays large changes in solubility that likely aid in impeding its identification in field samples of sea ice. Our solubility measurements display excellent agreement with that of the FREZCHEM model, which was therefore used to supplement our measurements to colder temperatures. Measured and modelled solubility data were incorporated into a 1D model for the growth of first-year Arctic sea ice. Model results ultimately suggest that mirabilite has a near ubiquitous presence in much of the sea ice on Earth, and illustrate the

  17. Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment.

    Science.gov (United States)

    Ortengren, U; Wellendorf, H; Karlsson, S; Ruyter, I E

    2001-12-01

    Water sorption and solubility of six proprietary composite resin materials were assessed, and monomers eluted from the organic matrix during water storage identified. Water sorption and solubility tests were carried out with the following storage times: 4 h, 24 h and 7, 60 and 180 days. After storage, water sorption and solubility were determined. Eluted monomers were analysed by high performance liquid chromatography (HPLC). Correlation between the retention time of the registered peak and the reference peak was observed, and UV-spectra confirmed the identity. The results showed an increase in water sorption until equilibrium for all materials with one exception. The solubility behaviour of the composite resin materials tested revealed variations, with both mass decrease and increase. The resin composition influences the water sorption and solubility behaviour of composite resin materials. The HPLC analysis of eluted components revealed that triethyleneglycol dimethacrylate (TEGDMA) was the main monomer released. Maximal monomer concentration in the eluate was observed after 7 days. During the test period, quantifiable quantities of urethanedimethacrylate (UEDMA) monomer were observed, whereas 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)-phenyl]propane (Bis-GMA) was only found in detectable quantities. No detectable quantities of bisphenol-A were observed during the test period.

  18. Sorption and solubility of ofloxacin and norfloxacin in water-methanol cosolvent.

    Science.gov (United States)

    Peng, Hongbo; Li, Hao; Wang, Chi; Zhang, Di; Pan, Bo; Xing, Baoshan

    2014-05-01

    Prediction of the properties and behavior of antibiotics is important for their risk assessment and pollution control. Theoretical calculation was incorporated in our experimental study to investigate the sorption of ofloxacin (OFL) and norfloxacin (NOR) on carbon nanotubes and their solubilities in water, methanol, and their mixture. Sorption for OFL and NOR decreased as methanol volume fractions (fc) increased. But the log-linear cosolvency model could not be applied as a general model to describe the cosolvent effect on OFL and NOR sorption. We computed the bond lengths of possible hydrogen bonds between solute and solvent and the corresponding interaction energies using Density Functional Theory. The decreased OFL solubility with increased fc could be attributed to the generally stronger hydrogen bond between OFL and H2O than that between OFL and CH3OH. Solubility of NOR varied nonmonotonically with increasing fc, which may be understood from the stronger hydrogen bond of NOR-CH3OH than NOR-H2O at two important sites (-O18 and -O21). The interaction energies were also calculated for the solute surrounded by solvent molecules at all the possible hydrogen bond sites, but it did not match the solubility variations with fc for both chemicals. The difference between the simulated and real systems was discussed. Similar sorption but different solubility of NOR and OFL from water-methanol cosolvent suggested that sorbate-solvent interaction seems not control their sorption.

  19. Structure-property relationships in halogenbenzoic acids: Thermodynamics of sublimation, fusion, vaporization and solubility.

    Science.gov (United States)

    Zherikova, Kseniya V; Svetlov, Aleksey A; Kuratieva, Natalia V; Verevkin, Sergey P

    2016-10-01

    Temperature dependences of vapor pressures for 2-, 3-, and 4-bromobenzoic acid, as well as for five isomeric bromo-methylbenzoic acids were studied by the transpiration method. Melting temperatures and enthalpies of fusion for all isomeric bromo-methylbenzoic acids and 4-bromobenzoic acid were measured with a DSC. The molar enthalpies of sublimation and vaporization were derived. These data together with results available in the literature were collected and checked for internal consistency using a group-additivity procedure and results from X-ray structural diffraction studies. Specific (hydrogen bonding) interactions in the liquid and in the crystal phase of halogenbenzoic acids were quantified based on experimental values of vaporization and sublimation enthalpies. Structure-property correlations of solubilities of halogenobenzoic acids with sublimation pressures and sublimation enthalpies were developed and solubilities of bromo-benzoic acids were estimated. These new results resolve much of the ambiguity in the available thermochemical and solubility data on bromobenzoic acids. The approach based on structure property correlations can be applied for the assessment of water solubility of sparingly soluble drugs.

  20. Multimodel Predictive System for Carbon Dioxide Solubility in Saline Formation Waters

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zan; Small, Mitchell J; Karamalidis, Athanasios K

    2013-02-05

    The prediction of carbon dioxide solubility in brine at conditions relevant to carbon sequestration (i.e., high temperature, pressure, and salt concentration (T-P-X)) is crucial when this technology is applied. Eleven mathematical models for predicting CO{sub 2} solubility in brine are compared and considered for inclusion in a multimodel predictive system. Model goodness of fit is evaluated over the temperature range 304–433 K, pressure range 74–500 bar, and salt concentration range 0–7 m (NaCl equivalent), using 173 published CO{sub 2} solubility measurements, particularly selected for those conditions. The performance of each model is assessed using various statistical methods, including the Akaike Information Criterion (AIC) and the Bayesian Information Criterion (BIC). Different models emerge as best fits for different subranges of the input conditions. A classification tree is generated using machine learning methods to predict the best-performing model under different T-P-X subranges, allowing development of a multimodel predictive system (MMoPS) that selects and applies the model expected to yield the most accurate CO{sub 2} solubility prediction. Statistical analysis of the MMoPS predictions, including a stratified 5-fold cross validation, shows that MMoPS outperforms each individual model and increases the overall accuracy of CO{sub 2} solubility prediction across the range of T-P-X conditions likely to be encountered in carbon sequestration applications.

  1. 全人源抗鼻咽癌噬菌体单链抗体的筛选与鉴定%Screening and characterization of human scFv antibodies against nasopharyngeal carcinoma

    Institute of Scientific and Technical Information of China (English)

    李艳东; 谢平丽; 王甲甲; 李跃辉; 胡锦跃; 李官成

    2009-01-01

    目的 从全人源抗鼻咽癌噬菌体抗体库中筛选特异性单链抗体(ScFv),并对其特异性进行鉴定.方法 通过噬菌体表面展示技术把ScFv表达在噬菌体表面,以鼻咽癌细胞作为抗原,用抗原递减法,通过"吸附-洗脱-扩增"过程筛选并富集特异性抗体,及ELISA筛选,获得特异阳性克隆进行免疫组化鉴定并测序.结果 通过对抗体库进行三轮正负淘洗和富集后,随机挑选4212个克隆进行ELISA,发现3个克隆对CNE2呈强阳性反应,而与人正常细胞系HUVEC等呈弱阳性反应或不反应.对克隆HNSAO33进一步进行免疫细胞化学验证,结果与ELISA反应一致;免疫组织化学鉴定表明克隆HNSAO33与鼻咽癌组织和鼻咽组织阳性率的差别有统计学意义.结论 通过淘选富集、ELISA和免疫化学鉴定获得特异性较强的噬菌体克隆,为鼻咽癌发病机制的研究和临床诊断以及治疗奠定了基础.%Objective To screen the anti-nasopharyngeal carcinoma scFv from a human anti-nasopharyngeal carcinoma single-chain phage antibody library, and identify its characteristics. Methods The single-chain phage antibody library was subjected to three rounds of positive and negative cell panning and enrichment, and then it was selected by ELISA. The binding specificity of phage antibodies with naso-pharyngeal carcinoma cells was confirmed by immunohistochemistry. Results After panning, enrichment and testing by ELISA, 3 phage an-tibody clones reacting with CNE2 more strongly than HUVEC and NP69 were picked out from 4212 clones. One clone, HNSAO33, was fur-ther analyzed after DNA sequencing. The results of immunohistochemistry with cultured cells were similar to those of ELISA. HNSAO33 spe-cifically reacted to nasopharyngeal carcinoma cells in most human nasopharyngeal carcinoma tissue sections except a few human normal naso-pharyngeal tissue sections. The distinction of positive rates was of a great statistical significance. Conclusion ELISA

  2. Production of a soluble single-chain variable fragment antibody against okadaic acid and exploration of its specific binding.

    Science.gov (United States)

    He, Kuo; Zhang, Xiuyuan; Wang, Lixia; Du, Xinjun; Wei, Dong

    2016-06-15

    Okadaic acid is a lipophilic marine algal toxin commonly responsible for diarrhetic shellfish poisoning (DSP). Outbreaks of DSP have been increasing and are of worldwide public health concern; therefore, there is a growing demand for more rapid, reliable, and economical analytical methods for the detection of this toxin. In this study, anti-okadaic acid single-chain variable fragment (scFv) genes were prepared by cloning heavy and light chain genes from hybridoma cells, followed by fusion of the chains via a linker peptide. An scFv-pLIP6/GN recombinant plasmid was constructed and transformed into Escherichia coli for expression, and the target scFv was identified with IC-CLEIA (chemiluminescent enzyme immunoassay). The IC15 was 0.012 ± 0.02 μg/L, and the IC50 was 0.25 ± 0.03 μg/L. The three-dimensional structure of the scFv was simulated with computer modeling, and okadaic acid was docked to the scFv model to obtain a putative structure of the binding complex. Two predicted critical amino acids, Ser32 and Thr187, were then mutated to verify this theoretical model. Both mutants exhibited significant loss of binding activity. These results help us to understand this specific scFv-antigen binding mechanism and provide guidance for affinity maturation of the antibody in vitro. The high-affinity scFv developed here also has potential for okadaic acid toxin detection.

  3. Development of a Total Organic Carbon method for the quantitative determination of solubility enhancement by cyclodextrins: Application to essential oils.

    Science.gov (United States)

    Kfoury, Miriana; Auezova, Lizette; Greige-Gerges, Hélène; Fourmentin, Sophie

    2016-04-28

    Formation of inclusion complexes with cyclodextrins (CDs) is known to enhance guest solubility in aqueous medium. Different techniques allow determining the evolution in solubility of individual guest compounds. However, examination of mixtures solubility encapsulated in CDs is still a challenge. This is mainly related to the difference in the response of mixture components to the applied technique or to the fact that most of the conventional methods examine the signal of an individual constituent of the mixture. Thus, applying current techniques may not reflect the behavior of the whole mixture. Here, we used for the first time Total Organic Carbon (TOC) analysis to explore and assess the efficiency of 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) to enhance the solubility of natural complex mixtures such as essential oils (EOs). Phase solubility studies were performed for eleven EOs with HP-β-CD. The TOC method has provided good validation parameters for linearity, precision and accuracy. For further validation of the method, phase solubility studies were performed with HP-β-CD for eugenol, as a model EO component. The eugenol solubility was determined by UV-Visible and TOC analyses in order to compare the results. Data obtained from both methods were similar (p encapsulation.

  4. Extended Hansen solubility approach: naphthalene in individual solvents.

    Science.gov (United States)

    Martin, A; Wu, P L; Adjei, A; Beerbower, A; Prausnitz, J M

    1981-11-01

    A multiple regression method using Hansen partial solubility parameters, delta D, delta p, and delta H, was used to reproduce the solubilities of naphthalene in pure polar and nonpolar solvents and to predict its solubility in untested solvents. The method, called the extended Hansen approach, was compared with the extended Hildebrand solubility approach and the universal-functional-group-activity-coefficient (UNIFAC) method. The Hildebrand regular solution theory was also used to calculate naphthalene solubility. Naphthalene, an aromatic molecule having no side chains or functional groups, is "well-behaved', i.e., its solubility in active solvents known to interact with drug molecules is fairly regular. Because of its simplicity, naphthalene is a suitable solute with which to initiate the difficult study of solubility phenomena. The three methods tested (Hildebrand regular solution theory was introduced only for comparison of solubilities in regular solution) yielded similar results, reproducing naphthalene solubilities within approximately 30% of literature values. In some cases, however, the error was considerably greater. The UNIFAC calculation is superior in that it requires only the solute's heat of fusion, the melting point, and a knowledge of chemical structures of solute and solvent. The extended Hansen and extended Hildebrand methods need experimental solubility data on which to carry out regression analysis. The extended Hansen approach was the method of second choice because of its adaptability to solutes and solvents from various classes. Sample calculations are included to illustrate methods of predicting solubilities in untested solvents at various temperatures. The UNIFAC method was successful in this regard.

  5. Characterization of Soluble Organics in Produced Water

    Energy Technology Data Exchange (ETDEWEB)

    Bostick, D.T.

    2002-01-16

    Soluble organics in produced water and refinery effluents represent treatment problems for the petroleum industry. Neither the chemistry involved in the production of soluble organics nor the impact of these chemicals on total effluent toxicity is well understood. The U.S. Department of Energy provides funding for Oak Ridge National Laboratory (ORNL) to support a collaborative project with Shell, Chevron, Phillips, and Statoil entitled ''Petroleum and Environmental Research Forum project (PERF 9844: Manage Water-Soluble Organics in Produced Water''). The goal of this project, which involves characterization and evaluation of these water-soluble compounds, is aimed at reducing the future production of such contaminants. To determine the effect that various drilling conditions might have on water-soluble organics (WSO) content in produced water, a simulated brine water containing the principal inorganic components normally found in Gulf of Mexico (GOM) brine sources was prepared. The GOM simulant was then contacted with as-received crude oil from a deep well site to study the effects of water cut, produced-water pH, salinity, pressure, temperature, and crude oil sources on the type and content of the WSO in produced water. The identities of individual semivolatile organic compounds (SVOCs) were determined in all as-received crude and actual produced water samples using standard USEPA Method (8270C) protocol. These analyses were supplemented with the more general measurements of total petroleum hydrocarbon (TPH) content in the gas (C{sub 6}-C{sub 10}), diesel (C{sub 10}-C{sub 20}), and oil (C{sub 20}-C{sub 28}) carbon ranges as determined by both gas chromatographic (GC) and infrared (IR) analyses. An open liquid chromatographic procedure was also used to differentiate the saturated hydrocarbon, aromatic hydrocarbon, and polar components within the extractable TPH. Inorganic constituents in the produced water were analyzed by ion

  6. 细胞表达流感病毒抗体CR6261VH与scFv对流感病毒感染的影响%Effect of antibody CR6261 VH and scFv expression on influenza virus infection

    Institute of Scientific and Technical Information of China (English)

    李燕; 李秀岚; 严景华

    2011-01-01

    The emerging CR6261 antibody could neutralize several subtype influenza virus with high affinity, whose VH domain binds to the HA protein conserved domain. Therefore, it has drawn much attention as a potential broad-spectrum therapeutic antibody against influenza virus. In this study, we constructed the eukaryotic expression vectors pCR6261VH, pCR6261VH-GFP and pCR6261scFv and screened the monoclonal cell lines that could stably express CR6261VH, CR6261VH-GFP and CR6261scFv on the cell membrane. After influenza virus infecting the stable cell lines, the titers of viruses were tested by hemagglutination inhibition test. The result shows that the titers of viruses in CR6261scFv and CR6261VH-GFP stable expression cell lines decreased and there was no obvious discrimination between the CR6261VH expression cell line and the negative control, suggesting that CR6261VH and CR6261scFv expressing on the cell membrane could partly inhibit the virus infection. Though the effective inhibition strategy is undergoing, our research will provide new clues for the breeding of anti influenza transgenic animals.%由于新发现的流感病毒抗体CR6261可以中和多种亚型的流感病毒,而且是其VH区结合于流感病毒蛋白HA的保守区,因此该抗体有望成为一种广谱的流感治疗性抗体而备受关注.通过构建真核表达栽体pCR6261VH、pCR6261VH-GFP、pCR6261 scFv,成功地筛选到在细胞膜上稳定表达CR6261 VH、CR6261VH-GFP与CR6261 scFv的单克隆细胞系.用流感病毒去感染稳定细胞系,间隔12 h取上清检测病毒血凝效价.结果表明:稳定表达CR6261 scFv和CR6261VH-GFP细胞系能够降低病毒的血凝效价,而表达CR6261VH细胞系的血凝效价与对照无显著差异.说明CR6261VH与CR6261scFv在细胞膜上表达能够部分抑制病毒侵染细胞.尽管更有效的抑制策略还在研究中,但本研究将为抗流感转基因动物的育种提供新的思路.

  7. 肿瘤干细胞表面标志物CD133单链抗体基因的分离与鉴定%Identification and characterization of single chain antibody of cancer stem cell surface marker CD133 scFv CD133

    Institute of Scientific and Technical Information of China (English)

    韩瑜; 周炳喜; 张延瑞; 韩双印

    2011-01-01

    Objective To identify,construct and express scFv CD133,verify its biological function.Methods VL and VH were isolated from hybridoma of mAb CD133 by using antibody engineering technology.Its DNA sequencing and CDR were determined.scFv CD133 was then cloned into pET32a,transformed into Origami,induced by IPTG,purified by Ni2+-NTA His resin.Its affinity and specificity were tested by NH4SCN elution and ELISA.Results The size of VL and VH of scFv CD133 was 339 bp and 342 bp,which coded 113 and 114 amino acid separately.Its VL belonged to mouse Igκ chain and VH belonged to mouse IgG heavy chain subtype I.The molecular weight of scFv CD133 was about 27 × 103 which was testified by SDSPAGE and Western blot.Its affinity and specificity were also verified.Conclusion scFv CD133 has been successfully constructed and expressed in Origami,which could supply basis for target therapy of CD+133 cancer stem cell.%目的 分离、构建和表达抗人CD133单链抗体(scFvCD133),测定其生物学活性.方法 用抗体工程技术从抗人CD133单克隆抗体(mAb)杂交瘤细胞中分离抗体可变区基因(VL和VH),测定DNA序列并确定抗体互补决定区(CDR);将scFv CD133基因克隆至pET32a中,转化Origami菌株,IPTG诱导,Ni2+-NTA His树脂纯化单链抗体,梯度硫氰酸盐洗脱法和酶联免疫吸附(ELISA)法检测其亲和性和特异性.结果 scFvCD133基因VL和VH长度分别为339 bp和342 bp,各编码113和114个氨基酸,其中VL隶属于小鼠Ig κ轻链,VH隶属于小鼠Ig重链Ⅰ亚类.scFvCD133经SDS-PAGE和Western blot 分析证明相对分子质量为27 × 103,体外实验具有一定的亲和性和特异性.结论 获得scFv CD133基因,为CD+133肿瘤干细胞的靶向治疗奠定了基础.

  8. Hansen solubility parameters for polyethylene glycols by inverse gas chromatography.

    Science.gov (United States)

    Adamska, Katarzyna; Voelkel, Adam

    2006-11-03

    Inverse gas chromatography (IGC) has been applied to determine solubility parameter and its components for nonionic surfactants--polyethylene glycols (PEG) of different molecular weight. Flory-Huggins interaction parameter (chi) and solubility parameter (delta(2)) were calculated according to DiPaola-Baranyi and Guillet method from experimentally collected retention data for the series of carefully selected test solutes. The Hansen's three-dimensional solubility parameters concept was applied to determine components (delta(d), delta(p), delta(h)) of corrected solubility parameter (delta(T)). The molecular weight and temperature of measurement influence the solubility parameter data, estimated from the slope, intercept and total solubility parameter. The solubility parameters calculated from the intercept are lower than those calculated from the slope. Temperature and structural dependences of the entopic factor (chi(S)) are presented and discussed.

  9. Extended Hansen approach: calculating partial solubility parameters of solid solutes.

    Science.gov (United States)

    Wu, P L; Beerbower, A; Martin, A

    1982-11-01

    A multiple linear regression method, known as the extended Hansen solubility approach, was used to estimate the partial solubility parameters, delta d, delta p, and delta h for crystalline solutes. The method is useful, since organic compounds may decompose near their melting points, and it is not possible, to determine solubility parameters for these solid compounds by the methods used for liquid solvents. The method gives good partial and total solubility parameters for naphthalene; with related compounds, less satisfactory results were obtained. At least three conditions, pertaining to the regression equation and the solvent systems, must be met in order to obtain reasonable solute solubility parameters. In addition to providing partial solubility parameters, the regression equations afford a calculation of solute solubility in both polar and nonpolar solvents.

  10. SYNTHESIS AND CHARACTERIZATION OF FULLY SOLUBLE POLYPHENYLENEVINYLENE

    Institute of Scientific and Technical Information of China (English)

    Jiang-qing Pan; Zi-kuan Chen; Yang Xiao; Wei Huang

    2000-01-01

    Fully soluble poly[2-methoxy-5-(2'-ethylhexyl)-oxy)-p-phenylenevinylene] (MEH-PPV) was synthesized by the addition of molecular weight modifiers (chain stopper, free radical scavengers) to a polymerization system containing monomer, catalyst and a solvent. These PPV products synthesized in this work were characterized by IR, NMR, UV-visible spectroscopy and GPC. Results show that the Mw of polyphenylvinylene (PPV) can be controlled by the addition of chain stopper (benzyl bromide) and radical inhibitor (2,6-di-tert-butyl-4-methyl phenol). The polymerization mechanism in the presence of these additives was also discussed. A dual mechanism involving carbene for PPV polymerization was proposed.

  11. The Marangoni flow of soluble amphiphiles

    CERN Document Server

    Roché, Matthieu; Griffiths, Ian M; Roux, Sébastien Le; Cantat, Isabelle; Saint-Jalmes, Arnaud; Stone, Howard A

    2013-01-01

    Surfactant distribution heterogeneities at a fluid/fluid interface trigger the Marangoni effect, i.e. a bulk flow due to a surface tension gradient. The influence of surfactant solubility in the bulk on these flows remains incompletely characterized. Here we study Marangoni flows sustained by injection of hydrosoluble surfactants at the air/water interface. We show that the flow extent increases with a decrease of the critical micelle concentration, i.e. the concentration at which these surfactants self-assemble in water. We document the universality of the surface velocity field and predict scaling laws based on hydrodynamics and surfactant physicochemistry that capture the flow features.

  12. Prediction of gas solubilities in ionic liquids.

    Science.gov (United States)

    Oliferenko, Alexander A; Oliferenko, Polina V; Seddon, Kenneth R; Torrecilla, José S

    2011-10-14

    Ionic liquids (of which it is estimated that there are at least one million simple fluids) generate a rich chemical space, which is now just at the beginning of its systematic exploration. Many properties of ionic liquids are truly unique and, which is more important, can be finely tuned. Differential solubility of industrial chemicals in ionic liquids is particularly interesting, because it can be a basis for novel, efficient, environmentally friendly technologies. Given the vast number of potential ionic liquids, and the impossibility of a comprehensive empirical exploration, it is essential to extract the maximum information from extant data. We report here some computational models of gas solubility. These multiple regression- and neural network-based models cover a chemical space spanned by 48 ionic liquids and 23 industrially important gases. Molecular polarisabilities and special Lewis acidity and basicity descriptors calculated for the ionic liquid cations and anions, as well as for the gaseous solutes, are used as input parameters. The quality of fit "observed versus predicted Henry's law constants" is particularly good for the neural network model. Validation was established with an external dataset, again with a high quality fit. In contrast to many other neural network models published, our model is no "black box", since contributions of the parameters and their nonlinearity characteristics are calculated and analysed.

  13. Actinide Solubility and Speciation in the WIPP

    Energy Technology Data Exchange (ETDEWEB)

    Reed, Donald T. [Los Alamos National Laboratory

    2015-11-02

    The presentation begins with the role and need for nuclear repositories (overall concept, international updates (Sweden, Finland, France, China), US approach and current status), then moves on to the WIPP TRU repository concept (design, current status--safety incidents of February 5 and 14, 2014, path forward), and finally considers the WIPP safety case: dissolved actinide concentrations (overall approach, oxidation state distribution and redox control, solubility of actinides, colloidal contribution and microbial effects). The following conclusions are set forth: (1) International programs are moving forward, but at a very slow and somewhat sporadic pace. (2) In the United States, the Salt repository concept, from the perspective of the long-term safety case, remains a viable option for nuclear waste management despite the current operational issues/concerns. (3) Current model/PA prediction (WIPP example) are built on redundant conservatisms. These conservatisms are being addressed in the ongoing and future research to fill existing data gaps--redox control of plutonium by Fe(0, II), thorium (analog) solubility studies in simulated brine, contribution of intrinsic and biocolloids to the mobile concentration, and clarification of microbial ecology and effects.

  14. Study of serum Helicobacter pylori soluble antigen

    Institute of Scientific and Technical Information of China (English)

    吴勤动; 朱永良

    2002-01-01

    Objective: to explore a new serological method for detecting Helicobac ter pylori ( H. pylori ) infection. Methods: Serum soluble antigen of H. p ylor i was detected by using avidin-biotin ELISA technique to evaluate the status of H. pylori infection and for comparison with rapid urease test ( RUT ), histo logi c examination and serology. Results: The sensitivity, specificity, positive pred ictive value and negative predictive value were 77.46%, 91.07%, 91.67% a nd 76.12 %, respectively. The prevalence rate of serum H. pylori soluble antigen in 138 patients undergoing endoscopy was similar to the rate obtained by 14 C-UBT met hods ( P>0.05 ). Conclusions: The detection of serum H. pylori solub le antigen( HpSAg) could be used as a new serological method which is accurate, and convenie nt, not affected by the memorizing reaction of serum antibody; is more sensitive , m ore specific and suitable for clinical diagnosis, and evaluation of eradication and for follow-up of H. pylori as well as for detection in children and pre gnant women.

  15. Nonlinear water waves with soluble surfactant

    Science.gov (United States)

    Lapham, Gary; Dowling, David; Schultz, William

    1998-11-01

    The hydrodynamic effects of surfactants have fascinated scientists for generations. This presentation describes an experimental investigation into the influence of a soluble surfactant on nonlinear capillary-gravity waves in the frequency range from 12 to 20 Hz. Waves were generated in a plexiglass wave tank (254 cm long, 30.5 cm wide, and 18 cm deep) with a triangular plunger wave maker. The tank was filled with carbon- and particulate-filtered water into which the soluble surfactant Triton-X-100® was added in known amounts. Wave slope was measured nonintrusively with a digital camera running at 225 fps by monitoring the position of light beams which passed up through the bottom of the tank, out through the wavy surface, and onto a white screen. Wave slope data were reduced to determine wave damping and the frequency content of the wave train. Both were influenced by the presence of the surfactant. Interestingly, a subharmonic wave occurring at one-sixth the paddle-driving frequency was found only when surfactant was present and the paddle was driven at amplitudes high enough to produce nonlinear waves in clean water. Although the origins of this subharmonic wave remain unclear, it appears to be a genuine manifestation of the combined effects of the surfactant and nonlinearity.

  16. Development of solid lipid nanoparticles for enhanced solubility of poorly soluble drugs

    DEFF Research Database (Denmark)

    Potta, Sriharsha Gupta; Minemi, Sriharsha; Nukala, Ravi Kumar

    2010-01-01

    Cyclosporine (CyA) solid lipid nanoparticles were prepared by using a solvent free high pressure homogenization process. CyA was incorporated into SLNs that consisted of stearic acid, trilaurin or tripalmitin lipid solid cores in order to enhance drug solubility. The process was conducted...

  17. Enhancement of carvedilol solubility by solid dispersion technique using cyclodextrins, water soluble polymers and hydroxyl acid.

    Science.gov (United States)

    Yuvaraja, K; Khanam, Jasmina

    2014-08-01

    Aim of the present work is to enhance aqueous solubility of carvedilol (CV) by solid dispersion technique using wide variety of carriers such as: β-cyclodextrin (βCD), hydroxypropyl-β-cyclodextrin (HPβCD), tartaric acid (TA), polyvinyl pyrrolidone K-30 (PVP K-30) and poloxamer-407 (PLX-407). Various products of 'CV-solid dispersion' had been studied extensively in various pH conditions to check enhancement of solubility and dissolution characteristics of carvedilol. Any physical change upon interaction between CV and carriers was confirmed by instrumental analysis: XRD, DSC, FTIR and SEM. Negative change of Gibb's free energy and complexation constants (Kc, 75-240M(-1), for cyclodextrins and 1111-20,365M(-1), for PVP K-30 and PLX-407) were the evidence of stable nature of the binding between CV and carriers. 'Solubility enhancement factor' of ionized-CV was found high enough (340 times) with HPβCD in presence of TA. TA increases the binding efficiency of cyclodextrin and changing the pH of microenvironment in dissolution medium. In addition, ionization process was used to increase the apparent intrinsic solubility of drug. In vitro, dissolution time of CV was remarkably reduced in the solid dispersion system compared to that of pure drug. This may be attributed to increased wettability, dispersing ability and transformation of crystalline state of drug to amorphous one.

  18. Overview of milling techniques for improving the solubility of poorly water-soluble drugs

    Directory of Open Access Journals (Sweden)

    Zhi Hui Loh

    2015-07-01

    Full Text Available Milling involves the application of mechanical energy to physically break down coarse particles to finer ones and is regarded as a “top–down” approach in the production of fine particles. Fine drug particulates are especially desired in formulations designed for parenteral, respiratory and transdermal use. Most drugs after crystallization may have to be comminuted and this physical transformation is required to various extents, often to enhance processability or solubility especially for drugs with limited aqueous solubility. The mechanisms by which milling enhances drug dissolution and solubility include alterations in the size, specific surface area and shape of the drug particles as well as milling-induced amorphization and/or structural disordering of the drug crystal (mechanochemical activation. Technology advancements in milling now enable the production of drug micro- and nano-particles on a commercial scale with relative ease. This review will provide a background on milling followed by the introduction of common milling techniques employed for the micronization and nanonization of drugs. Salient information contained in the cited examples are further extracted and summarized for ease of reference by researchers keen on employing these techniques for drug solubility and bioavailability enhancement.

  19. Experimental measurement of solid solutes solubility in nanofluids

    Science.gov (United States)

    Fard, Manouchehr Manouchehrian; Beiki, Hossein

    2016-08-01

    The solubility of benzoic and salicylic acids was measured at a temperature range from 293 to 333 K in two types of water based nanofluids employed as the solvent. Silica and γ-alumina nanoparticles with volume concentrations of 0.025, 0.05, 0.1, 0.2 and 0.4 % were dispersed into de-ionized water as the based fluid. The results revealed that the solubility of nanofluid followed the same trend as pure water solubility with increasing temperature. At low temperatures, below 330 K for γ-Al2O3 nanofluids and 323 K for SiO2 nanofluids, nanoparticles had no effect on solubility, but by increasing the temperature, nanofluid solubility decreased. The maximum reduction in the solubility of compounds was observed at the temperature of 333 K and in 0.1 % γ-Alumina nanofluid and 0.025 % Silica nanofluids. Nanofluids solubility decreased up to a critical nanoparticles concentration while increased by increasing nanoparticles concentration further. The maximum reduction of nanofluids solubility at critical concentration was about 12.43 % for salicylic acid and 10.24 % for benzoic acid in 0.025 % SiO2 nanofluid. Nanofluids solubility was found to be strongly dependent on nanoparticles size. Bigger nanoparticles were more effective than smaller ones on nanofluids solubility.

  20. Partial solubility parameters and solvatochromic parameters for predicting the solubility of single and multiple drugs in individual solvents.

    Science.gov (United States)

    Bustamante, P; Martin, A; Gonzalez-Guisandez, M A

    1993-06-01

    A modification of the extended Hansen method is used for estimating the solubility of sulfadiazine and other organic drug molecules in a number of individual solvents ranging from nonpolar to highly polar. The equations obtained for each drug involve the partial solubility parameters of the solvents and allow the prediction of solubility of these drugs in a new solvent. Furthermore, a number of drugs (e.g., sulfadiazine, sulfamethoxypyridazine, naphthalene, and some benzoic acid derivatives) are combined in a single expression including the ideal solubility of the drugs and the partial solubility parameters of the solvents. The equation fits the solubilities of these drugs in a wide variety of solvents and may be used to predict the solubility of other sulfonamides and benzoic acid derivatives in semipolar and highly polar solvents. The solvatochromic parameter approach is also used in models for predicting the solubility of single drugs in individual solvents. It was tested with multiple solutes as was the partial solubility parameter approach. However, the latter approach is superior; the parameters of the solubility parameter method are all statistically significant for drugs tested individually or together in a single equation, a condition that is not obtained with the solvatochromic model.

  1. Selection of solubility parameters for characterization of pharmaceutical excipients.

    Science.gov (United States)

    Adamska, Katarzyna; Voelkel, Adam; Héberger, Károly

    2007-11-09

    The solubility parameter (delta(2)), corrected solubility parameter (delta(T)) and its components (delta(d), delta(p), delta(h)) were determined for series of pharmaceutical excipients by using inverse gas chromatography (IGC). Principal component analysis (PCA) was applied for the selection of the solubility parameters which assure the complete characterization of examined materials. Application of PCA suggests that complete description of examined materials is achieved with four solubility parameters, i.e. delta(2) and Hansen solubility parameters (delta(d), delta(p), delta(h)). Selection of the excipients through PCA of their solubility parameters data can be used for prediction of their behavior in a multi-component system, e.g. for selection of the best materials to form stable pharmaceutical liquid mixtures or stable coating formulation.

  2. Solubility increases associated with crystalline drug nanoparticles: methodologies and significance.

    Science.gov (United States)

    Van Eerdenbrugh, Bernard; Vermant, Jan; Martens, Johan A; Froyen, Ludo; Humbeeck, Jan Van; Van den Mooter, Guy; Augustijns, Patrick

    2010-10-01

    In this manuscript, the determination of solubility of crystalline drug nanosuspensions by a range of methods is critically investigated. As the determinations of solubility were performed in the presence of the solubilizing nanosuspension stabilizer d-α-tocopherol polyethylene glycol 1000 succinate (TPGS), the potential effects of this excipient on the measurements were studied first. Solubility data of nanosuspensions of itraconazole, loviride, phenytoin and naproxen were generated using different methodologies. Data obtained using separation-based methodologies (centrifugation, filtration and ultracentrifugation) proved to be of limited use, due to poor nanoparticle separation efficiencies and/or significant adsorption of TPGS onto the nanoparticle surfaces. Light scattering and turbidity were found to be more suitable for the determination of nanosuspension solubility. The obtained data show that, unlike earlier reports, the solubility increases due to nanosizing are small, with measured increases of only 15%. These solubility increases are in fair agreement with what would be predicted based on the Ostwald-Freundlich equation.

  3. Exactly soluble model of boundary degeneracy

    Science.gov (United States)

    Ganeshan, Sriram; Gorshkov, Alexey V.; Gurarie, Victor; Galitski, Victor M.

    2017-01-01

    We investigate the topological degeneracy that can be realized in Abelian fractional quantum spin Hall states with multiply connected gapped boundaries. Such a topological degeneracy (also dubbed as "boundary degeneracy") does not require superconducting proximity effect and can be created by simply applying a depletion gate to the quantum spin Hall material and using a generic spin-mixing term (e.g., due to backscattering) to gap out the edge modes. We construct an exactly soluble microscopic model manifesting this topological degeneracy and solve it using the recently developed technique [S. Ganeshan and M. Levin, Phys. Rev. B 93, 075118 (2016), 10.1103/PhysRevB.93.075118]. The corresponding string operators spanning this degeneracy are explicitly calculated. It is argued that the proposed scheme is experimentally reasonable.

  4. DEVELOPMENT OF PETROLUEM RESIDUA SOLUBILITY MEASUREMENT METHODOLOGY

    Energy Technology Data Exchange (ETDEWEB)

    Per Redelius

    2006-03-01

    In the present study an existing spectrophotometry system was upgraded to provide high-resolution ultraviolet (UV), visible (Vis), and near infrared (NIR) analyses of test solutions to measure the relative solubilities of petroleum residua dissolved in eighteen test solvents. Test solutions were prepared by dissolving ten percent petroleum residue in a given test solvent, agitating the mixture, followed by filtration and/or centrifugation to remove insoluble materials. These solutions were finally diluted with a good solvent resulting in a supernatant solution that was analyzed by spectrophotometry to quantify the degree of dissolution of a particular residue in the suite of test solvents that were selected. Results obtained from this approach were compared with spot-test data (to be discussed) obtained from the cosponsor.

  5. Use of Hansen Solubility Parameters in Fuel Treatment Processes

    Science.gov (United States)

    2014-03-17

    Charts 3. DATES COVERED (From - To) Jan 2014- Mar 2014 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER In-House Use of Hansen Solubility Parameters in...distribution is unlimited. AFRL Public Affairs Clearance # USE OF HANSEN SOLUBILITY PARAMETERS IN FUEL TREATMENT PROCESSES 17 March 2014 Andrew J...Treatment Needs – Hansen Solubility Parameters • Dyes – Experimental HSP Determination – Extrapolation to Other Dyes • Predictions for Extraction Fluids

  6. Thermodynamic analysis for solubility of pimelic acid in ionic liquids

    Science.gov (United States)

    Li, Hua; Jiao, Xingli; Chen, Xiaoshuang

    2014-07-01

    Based on the solubilities of pimelic acid in ionic liquids [EMIM][HSO4], [PMIM]Br, [i-PMIM][HSO4], [BMIM]Br, and [BMIM][HSO4], dissolution enthalpy and dissolution entropy at different temperatures have been calculated. The experimental data of solubilities are correlated with the modified Apelblat equation. The thermodynamic properties of pimelic acid in ionic liquids were discussed. The solubilities correlated by the model are in good agreement with experimental data.

  7. Nanosuspension: An approach to enhance solubility of drugs

    OpenAIRE

    Patel, Vishal R.; Y K Agrawal

    2011-01-01

    One of the major problems associated with poorly soluble drugs is very low bioavailability. The problem is even more complex for drugs like itraconazole, simvastatin, and carbamazepine which are poorly soluble in both aqueous and nonaqueous media, belonging to BCS class II as classified by biopharmaceutical classification system. Formulation as nanosuspension is an attractive and promising alternative to solve these problems. Nanosuspension consists of the pure poorly water-soluble drug witho...

  8. Aqueous solubilities of phenol derivatives by conductivity measurements

    Energy Technology Data Exchange (ETDEWEB)

    Achard, C.; Jaoui, M.; Schwing, M.; Rogalski, M. [Univ. de Metz (France). Lab. de Thermodynamique et d`Analyse Chimique

    1996-05-01

    The aqueous solubilities of five chlorophenols and three nitrophenols were measured by conductimetry at temperatures between 15 and 48C. The solubilities of 2-chlorophenol, 4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol, 2-nitrophenol, 4-nitrophenol, and 2,4-dinitrophenol were studied. Automatic conductivity measurements allow the determination of the solute concentration and, hence, the determination of the solubility. Emulsion formation can also be followed. Results obtained are in good agreement with literature values.

  9. Determination of solubility of uranium in liquid sodium

    Institute of Scientific and Technical Information of China (English)

    YANG Tongzai; XING Pifeng; YE Shiyou; LONG Kaiming; FU Zhonghua; HE Yuhui; JIANG Tao

    2008-01-01

    An experimental technique has been developed which overcomes the two major problems common to liquid metal solubility measurements, namely, maintaining the integrity of the samples during transfer of the liquid sodium from container to whatever device is used for analysis and detecting solute at very low concentration in liquid sodium. The solubility of uranium in liquid sodium has been measured over the temperature range 150~400℃, by equilibration and sampling technique, the solubility of uranium is approximately 0.00001%.

  10. Solubility of strontium-substituted apatite by solid titration

    OpenAIRE

    Pan, HB; Darvell, BW; Luk, KDK; Lu, WW; Li, ZY; Lam, WM; Wong, JC

    2009-01-01

    Solid titration was used to explore the solubility isotherms of partially (Srx-HAp, x = 1, 5, 10, 40, 60 mol.%) and fully substituted strontium hydroxyapatite (Sr-HAp). Solubility increased with increasing strontium content. No phase other than strontium-substituted HAp, corresponding to the original titrant, was detected in the solid present at equilibrium; in particular, dicalcium hydrogen phosphate was not detected at low pH. The increase in solubility with strontium content is interpreted...

  11. Global modeling study of soluble organic nitrogen from open biomass burning

    Science.gov (United States)

    Ito, Akinori; Lin, Guangxing; Penner, Joyce E.

    2015-11-01

    Atmospheric deposition of reactive nitrogen (N) species from large fires may contribute to enrichment of nutrients in aquatic ecosystems. Here we use an atmospheric chemistry transport model to investigate the supply of soluble organic nitrogen (ON) from open biomass burning to the ocean. The model results show that the annual deposition rate of soluble ON to the oceans (14 Tg N yr-1) is increased globally by 13% with the increase being particularly notable over the tropical oceans downwind from the source regions. The estimated deposition of soluble ON due to biomass burning from the secondary formation (1.0 Tg N yr-1) is close to that from the primary sources (1.2 Tg N yr-1). We examine the secondary formation of particulate C-N compounds (i.e., imidazole, methyl imidazole, and N-containing oligomers) from the reactions of glyoxal (CHOCHO) and methylglyoxal (CH3COCHO) with ammonium (NH4+) in wet aerosols and upon cloud evaporation. These ON sources result in a significant contribution to the open ocean (1.3 Tg N yr-1), suggesting that atmospheric processing in aqueous-phase may have a large effect. We compare the soluble ON concentration in aerosols with and without open biomass burning as a case study in Singapore. The model results demonstrate that the soluble ON concentration in aerosols is episodically enriched during the fire events, compared to the case without smoke simulations. At the same time, the model results show that the daily soluble ON concentration can be also enhanced in the case without smoke simulations, compared to the monthly averages. These results may suggest that both the primary source strength of ON and the secondary formation rates of ON should be taken into consideration when using in-situ observations to constrain the calculated soluble ON burden due to biomass burning. More accurate quantification of the soluble ON burdens both with and without smoke sources is therefore needed to assess the effect of biomass burning on bioavailable

  12. A Path to Soluble Molecularly Imprinted Polymers

    Directory of Open Access Journals (Sweden)

    Abhilasha Verma

    2011-12-01

    Full Text Available Molecular imprinting is a technique for making a selective binding site for a specific chemical. The technique involves building a polymeric scaffold of molecular complements containing the target molecule. Subsequent removal of the target leaves a cavity with a structural “memory” of the target. Molecularly imprinted polymers (MIPs can be employed as selective adsorbents of specific molecules or molecular functional groups. In addition, sensors for specific molecules can be made using optical transduction through lumiphores residing in the imprinted site. We have found that the use of metal ions as chromophores can improve selectivity due to selective complex formation. The combination of molecular imprinting and spectroscopic selectivity can result in sensors that are highly sensitive and nearly immune to interferences. A weakness of conventional MIPs with regard to processing is the insolubility of crosslinked polymers. Traditional MIPs are prepared either as monoliths and ground into powders or are prepared in situ on a support. This limits the applicability of MIPs by imposing tedious or difficult processes for their inclusion in devices. The size of the particles hinders diffusion and slows response. These weaknesses could be avoided if a means were found to prepare individual macromolecules with crosslinked binding sites with soluble linear polymeric arms. This process has been made possible by controlled free radical polymerization techniques that can form pseudo-living polymers. Modern techniques of controlled free radical polymerization allow the preparation of block copolymers with potentially crosslinkable substituents in specific locations. The inclusion of crosslinkable mers proximate to the binding complex in the core of a star polymer allows the formation of molecularly imprinted macromolecules that are soluble and processable. Due to the much shorter distance for diffusion, the polymers exhibit rapid responses. This paper

  13. Solubility of xenon in amino-acid solutions. II. Nine less-soluble amino acids

    Science.gov (United States)

    Kennan, Richard P.; Himm, Jeffrey F.; Pollack, Gerald L.

    1988-05-01

    Ostwald solubility (L) of xenon gas, as the radioisotope 133Xe, has been measured as a function of solute concentration, at 25.0 °C, in aqueous solutions of nine amino acids. The amino-acid concentrations investigated covered much of their solubility ranges in water, viz., asparagine monohydrate (0-0.19 M), cysteine (0-1.16 M), glutamine (0-0.22 M), histidine (0-0.26 M), isoleucine (0-0.19 M), methionine (0-0.22 M), serine (0-0.38 M), threonine (0-1.4 M), and valine (0-0.34 M). We have previously reported solubility results for aqueous solutions of six other, generally more soluble, amino acids (alanine, arginine, glycine, hydroxyproline, lysine, and proline), of sucrose and sodium chloride. In general, L decreases approximately linearly with increasing solute concentration in these solutions. If we postulate that the observed decreases in gas solubility are due to hydration, the results under some assumptions can be used to calculate hydration numbers (H), i.e., the number of H2O molecules associated with each amino-acid solute molecule. The average values of hydration number (H¯) obtained at 25.0 °C are 15.3±1.5 for asparagine, 6.8±0.3 for cysteine, 11.5±1.1 for glutamine, 7.3±0.7 for histidine, 5.9±0.4 for isoleucine, 10.6±0.8 for methionine, 11.2±1.3 for serine, 7.7± 1.0 for threonine, and 6.6±0.6 for valine. We have also measured the temperature dependence of solubility L(T) from 5-40 °C for arginine, glycine, and proline, and obtained hydration numbers H¯(T) in this range. Between 25-40 °C, arginine has an H¯ near zero. This may be evidence for an attractive interaction between xenon and arginine molecules in aqueous solution.

  14. On barium oxide solubility in barium-containing chloride melts

    Energy Technology Data Exchange (ETDEWEB)

    Nikolaeva, Elena V.; Zakiryanova, Irina D.; Bovet, Andrey L.; Korzun, Iraida V. [Ural Federal Univ., Yekaterinburg (Russian Federation). Inst. of High Temperature Electrochemistry

    2016-11-01

    Oxide solubility in chloride melts depends on temperature and composition of molten solvent. The solubility of barium oxide in the solvents with barium chloride content is essentially higher than that in molten alkali chlorides. Spectral data demonstrate the existence of oxychloride ionic groupings in such melts. This work presents the results of the BaO solubility in two molten BaCl{sub 2}-NaCl systems with different barium chloride content. The received data together with earlier published results revealed the main regularities of BaO solubility in molten BaO-BaCl{sub 2}-MCl systems.

  15. Solubilities of Cimaterol and Mabuterol in SF-CO2

    Institute of Scientific and Technical Information of China (English)

    李淑芳

    2000-01-01

    The solubilities of two β-agonists, cimaterol and mabuterol, in supercritical carbon dioxide (SF-CO2) were measured by a recirculating method at temperatures of 40℃ and 60℃ and pressures between 9 MPa to 49 MPa.The compounds exhibit very limited solubilities in the range of 10-5 to 10-7 (mole fraction). Cimaterol has a higher solubility than that of mabuterol. The experimental data of solubility were correlated by four density-based models.The correlation accuracy highly depends on the system investigated, which is mainly determined by the density ranges and temperature.

  16. Are soluble and membrane-bound rat brain acetylcholinesterase different

    Energy Technology Data Exchange (ETDEWEB)

    Andres, C.; el Mourabit, M.; Stutz, C.; Mark, J.; Waksman, A. (Centre de Neurochimie du C.N.R.S., Strasbourg, (France))

    1990-11-01

    Salt-soluble and detergent-soluble acetylcholinesterases (AChE) from adult rat brain were purified to homogeneity and studied with the aim to establish the differences existing between these two forms. It was found that the enzymatic activities of the purified salt-soluble AChE as well as the detergent-soluble AChE were dependent on the Triton X-100 concentration. Moreover, the interaction of salt-soluble AChE with liposomes suggests amphiphilic behaviour of this enzyme. Serum cholinesterase (ChE) did not bind to liposomes but its activity was also detergent-dependent. Detergent-soluble AChE remained in solution below critical micellar concentrations of Triton X-100. SDS polyacrylamide gel electrophoresis of purified, Biobeads-treated and iodinated detergent-soluble 11 S AChE showed, under non reducing conditions, bands of 69 kD, 130 kD and greater than 250 kD corresponding, respectively, to monomers, dimers and probably tetramers of the same polypeptide chain. Under reducing conditions, only a 69 kD band was detected. It is proposed that an amphiphilic environment stabilizes the salt-soluble forms of AChE in the brain in vivo and that detergent-soluble Biobeads-treated 11 S AChE possess hydrophobic domain(s) different from the 20 kD peptide already described.

  17. Method for Predicting Solubilities of Solids in Mixed Solvents

    DEFF Research Database (Denmark)

    Ellegaard, Martin Dela; Abildskov, Jens; O'Connell, J. P.

    2009-01-01

    A method is presented for predicting solubilities of solid solutes in mixed solvents, based on excess Henry's law constants. The basis is statistical mechanical fluctuation solution theory for composition derivatives of solute/solvent infinite dilution activity coefficients. Suitable approximations...... are made for a single parameter characterizing solute/solvent interactions. Comparisons with available data show that the method is successful in describing a variety of observed mixed solvent solubility behavior, including nearly ideal systems with small excess solubilities, systems with solute......-independent excess solubilities, and systems deviating from these simple rules. Successful predictions for new solvent mixtures cat? be made using limited data from other mixtures....

  18. Effect of magnesium carbonate on the solubility, dissolution and oral bioavailability of fenofibric acid powder as an alkalising solubilizer.

    Science.gov (United States)

    Kim, Kyeong Soo; Kim, Jeong Hyun; Jin, Sung Giu; Kim, Dong Wuk; Kim, Dong Shik; Kim, Jong Oh; Yong, Chul Soon; Cho, Kwan Hyung; Li, Dong Xun; Woo, Jong Soo; Choi, Han-Gon

    2016-04-01

    To investigate the possibility of developing a novel oral pharmaceutical product using fenofibric acid instead of choline fenofibrate, the powder properties, solubility, dissolution and pharmacokinetics in rats of fenofibrate, choline fenofibrate and fenofibric acid were compared. Furthermore, the effect of magnesium carbonate, an alkalising agent on the solubility, dissolution and oral bioavailability of fenofibric acid was assessed, a mixture of fenofibric acid and magnesium carbonate being prepared by simple blending at a weight ratio of 2/1. The three fenofibrate derivatives showed different particle sizes and melting points with similar crystalline shape. Fenofibric acid had a significantly higher aqueous solubility and dissolution than fenofibrate, but significantly lower solubility and dissolution than choline fenofibrate. However, the fenofibric acid/magnesium carbonate mixture greatly improved the solubility and dissolution of fenofibric acid with an enhancement to levels similar with those for choline fenofibrate. Fenofibric acid gave lower plasma concentrations, AUC and Cmax values compared to choline fenofibrate in rats. However, the mixture resulted in plasma concentrations, AUC and Cmax values levels not significantly different from those for choline fenofibrate. Specifically, magnesium carbonate increased the aqueous solubility, dissolution and bioavailability of fenofibric acid by about 7.5-, 4- and 1.6-fold, respectively. Thus, the mixture of fenofibric acid and magnesium carbonate at the weight ratio of 2/1 might be a candidate for an oral pharmaceutical product with improved oral bioavailability.

  19. Urinary water-soluble vitamins and their metabolite contents as nutritional markers for evaluating vitamin intakes in young Japanese women.

    Science.gov (United States)

    Fukuwatari, Tsutomu; Shibata, Katsumi

    2008-06-01

    Little information is available to estimate water-soluble vitamin intakes from urinary vitamins and their metabolite contents as possible nutritional markers. Determination of the relationships between the oral dose and urinary excretion of water-soluble vitamins in human subjects contributes to finding valid nutrition markers of water-soluble vitamin intakes. Six female Japanese college students were given a standard Japanese diet in the first week, the same diet with a synthesized water-soluble vitamin mixture as a diet with approximately onefold vitamin mixture based on Dietary Reference Intakes (DRIs) for Japanese in the second week, with a threefold vitamin mixture in the third week, and a sixfold mixture in the fourth week. Water-soluble vitamins and their metabolites were measured in the 24-h urine collected each week. All urinary vitamins and their metabolite levels except vitamin B(12) increased linearly in a dose-dependent manner, and highly correlated with vitamin intake (r=0.959 for vitamin B(1), r=0.927 for vitamin B(2), r=0.965 for vitamin B(6), r=0.957 for niacin, r=0.934 for pantothenic acid, r=0.907 for folic acid, r=0.962 for biotin, and r=0.952 for vitamin C). These results suggest that measuring urinary water-soluble vitamins and their metabolite levels can be used as good nutritional markers for assessing vitamin intakes.

  20. Plasma soluble prion protein, a potential biomarker for sport-related concussions: a pilot study.

    Science.gov (United States)

    Pham, Nam; Akonasu, Hungbo; Shishkin, Rhonda; Taghibiglou, Changiz

    2015-01-01

    Sport-related mild traumatic brain injury (mTBI) or concussion is a significant health concern to athletes with potential long-term consequences. The diagnosis of sport concussion and return to sport decision making is one of the greatest challenges facing health care clinicians working in sports. Blood biomarkers have recently demonstrated their potential in assisting the detection of brain injury particularly, in those cases with no obvious physical injury. We have recently discovered plasma soluble cellular prion protein (PrP(C)) as a potential reliable biomarker for blast induced TBI (bTBI) in a rodent animal model. In order to explore the application of this novel TBI biomarker to sport-related concussion, we conducted a pilot study at the University of Saskatchewan (U of S) by recruiting athlete and non-athlete 18 to 30 year-old students. Using a modified quantitative ELISA method, we first established normal values for the plasma soluble PrP(C) in male and female students. The measured plasma soluble PrP(C) in confirmed concussion cases demonstrated a significant elevation of this analyte in post-concussion samples. Data collected from our pilot study indicates that the plasma soluble PrP(C) is a potential biomarker for sport-related concussion, which may be further developed into a clinical diagnostic tool to assist clinicians in the assessment of sport concussion and return-to-play decision making.

  1. Plasma soluble prion protein, a potential biomarker for sport-related concussions: a pilot study.

    Directory of Open Access Journals (Sweden)

    Nam Pham

    Full Text Available Sport-related mild traumatic brain injury (mTBI or concussion is a significant health concern to athletes with potential long-term consequences. The diagnosis of sport concussion and return to sport decision making is one of the greatest challenges facing health care clinicians working in sports. Blood biomarkers have recently demonstrated their potential in assisting the detection of brain injury particularly, in those cases with no obvious physical injury. We have recently discovered plasma soluble cellular prion protein (PrP(C as a potential reliable biomarker for blast induced TBI (bTBI in a rodent animal model. In order to explore the application of this novel TBI biomarker to sport-related concussion, we conducted a pilot study at the University of Saskatchewan (U of S by recruiting athlete and non-athlete 18 to 30 year-old students. Using a modified quantitative ELISA method, we first established normal values for the plasma soluble PrP(C in male and female students. The measured plasma soluble PrP(C in confirmed concussion cases demonstrated a significant elevation of this analyte in post-concussion samples. Data collected from our pilot study indicates that the plasma soluble PrP(C is a potential biomarker for sport-related concussion, which may be further developed into a clinical diagnostic tool to assist clinicians in the assessment of sport concussion and return-to-play decision making.

  2. Refuse derived soluble bio-organics enhancing tomato plant growth and productivity

    Energy Technology Data Exchange (ETDEWEB)

    Sortino, Orazio [Dipartimento di Scienze Agronomiche Agrochimiche e delle Produzioni Animali, Universita degli Studi di Catania, Via Valdisavoia 5, 95123 Catania (Italy); Dipasquale, Mauro [Dipartimento di Chimica, Universita di Torino, Via P. Giuria 7, 10125 Torino (Italy); Montoneri, Enzo, E-mail: enzo.montoneri@unito.it [Dipartimento di Chimica, Universita di Torino, Via P. Giuria 7, 10125 Torino (Italy); Tomasso, Lorenzo; Perrone, Daniele G. [Dipartimento di Chimica, Universita di Torino, Via P. Giuria 7, 10125 Torino (Italy); Vindrola, Daniela; Negre, Michele; Piccone, Giuseppe [Dipartimento di Valorizzazione e Protezione delle Risorse Agroforestali, Universita di Torino, Via L. da Vinci 44, 10095 Grugliasco (Italy)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Municipal bio-wastes are a sustainable source of bio-based products. Black-Right-Pointing-Pointer Refuse derived soluble bio-organics promote chlorophyll synthesis. Black-Right-Pointing-Pointer Refuse derived soluble bio-organics enhance plant growth and fruit ripening rate. Black-Right-Pointing-Pointer Sustainable chemistry exploiting urban refuse allows sustainable development. Black-Right-Pointing-Pointer Chemistry, agriculture and the environment benefit from biowaste technology. - Abstract: Municipal bio-refuse (CVD), containing kitchen wastes, home gardening residues and public park trimmings, was treated with alkali to yield a soluble bio-organic fraction (SBO) and an insoluble residue. These materials were characterized using elemental analysis, potentiometric titration, and 13C NMR spectroscopy, and then applied as organic fertilizers to soil for tomato greenhouse cultivation. Their performance was compared with a commercial product obtained from animal residues. Plant growth, fruit yield and quality, and soil and leaf chemical composition were the selected performance indicators. The SBO exhibited the best performance by enhancing leaf chlorophyll content, improving plant growth and fruit ripening rate and yield. No product performance-chemical composition relationship could be assessed. Solubility could be one reason for the superior performance of SBO as a tomato growth promoter. The enhancement of leaf chlorophyll content is discussed to identify a possible link with the SBO photosensitizing properties that have been demonstrated in other work, and thus with photosynthetic performance.

  3. Increased expression of cytokines, soluble cytokine receptors, soluble apoptosis ligand and apoptosis in dengue.

    Science.gov (United States)

    Arias, Julia; Valero, Nereida; Mosquera, Jesús; Montiel, Milagros; Reyes, Eduardo; Larreal, Yraima; Alvarez-Mon, Melchor

    2014-03-01

    Several studies have been performed to determine biomarkers that define the risk factors to developing severe forms of dengue. In this study, the levels of TNF-α, IL-6, IL-1, IL-17, soluble interleukin-1 receptor like 1 protein (sST2), soluble TNF-related apoptosis-inducing ligand (sTRAIL), IL-12 and soluble receptors for TNF (sTNF-RI and sTNF-RII) were determined by ELISA in dengue patients and monocyte/macrophage cultures. Dengue was classified as dengue without warning symptoms (DNWS), with warning symptoms (DWWS) and severe dengue (SD). High values of IL-6, sTNFRI, sTNFRII and sST2 were observed in DWWS and/or SD and IL-12 and sTRAIL in DNWS. TNF-α and IL-17 were increased not associated to the disease severity. High production of TNF-α, IL-1β, IL-12, IL-17, sST2 and sTRAIL and apoptosis expression were observed in dengue monocyte/macrophage cultures. This study shows that beneficial or deleterious biomarkers can be present in dengue regardless the disease severity and that monocytes may be in part the source of studied molecules.

  4. Screening scFv Specific to Vcam-1 by Phage Display Library and Its Activity Evaluation%噬菌体展示库筛选构建血管细胞黏附分子-1单链抗体及其效价检测

    Institute of Scientific and Technical Information of China (English)

    刘纯宝; 宋夷龄; 张永学

    2015-01-01

    were transferred into E.coli ,and the clone with the highest expression was regarded as the final requisite one.Competent cells were infected by the final requisite clone and scFv was expressed.After purification ,the activity of scFv was tested by ELISA and its affinity was evaluated.Results Molecular weight of Vcam‐1 antigen protein was 85-90 kD.Positive clones were screened out by taking Vcam‐1 protein as the antigen ,and 9 high titer clones were obtained by single phage ELISA.Gene sequencing of these clones was carried out and 3 sequences were obtained ,1 of which got the highest expression.Molecular weight of the expressed scFv was about 30 kD.The scFv got high affinity to Vcam‐1 antigen according to ELISA ,in spite of its lower activity than full‐length monoclonal antibody.Conclusion scFv antibody specific to Vcam‐1 was successfully obtained from phage display librar‐y ,which laid the foundation of subsequent in vivo diagnosis and therapy.

  5. Biological significance of soluble IL-2 receptor

    Directory of Open Access Journals (Sweden)

    Calogero Caruso

    1993-01-01

    Full Text Available A NUMBER of receptors for growth factors and differentiation antigens have been found to be secreted or released by cells. Following mononuclear cell (MNC activation and interleukin-2 receptor (IL-2R expression, a soluble form of the Alpha;-chain of IL-2R (sIL-2R is released. The sIL-2R has been shown to be present in the culture supernatants of activated MNCs as well as in normal sera and, in higher amounts, in sera from subjects affected by several diseases including neoplastic, infectious and autoimmune ones, and in sera from transplanted patients suffering allograft rejection. The blood sIL-2R levels depend on the number of producing cells and the number of molecules per cell, so that sIL-2R blood values may represent an index of the number and the functional state of producing cells, both normal and neoplastic. Thus, monitoring of the immune system, mostly T-cells and haematological malignancies might be targets for the measurement of sIL-2R. Since many conditions may influence sIL-2R production, little diagnostic use may result from these measurements. However, since blood sIL-2R levels may correlate with disease progression and/or response to therapy, their measurement may be a useful index of activity and extent of disease. The precise biological role of the soluble form of the IL-2R is still a matter of debate. However, we know that increased sIL-2R levels may be observed in association with several immunological abnormalities and that sIL-2R is able to bind IL-2. It is conceivable then that in these conditions the excess sIL-2R released in vivo by activated lymphoid cells or by neoplastic cells may somehow regulate IL-2-dependent processes. On the other hand, it cannot exclude that sIL-2R is a by-product without biological significance. Finally, it is puzzling that in many conditions in which an increase of blood sIL-2R values has been observed, MNCs display a decreased in vitro capacity to produce sIL-2R. These seemingly contrasting

  6. Production of soluble Neprilysin by endothelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Kuruppu, Sanjaya, E-mail: Sanjaya.Kuruppu@monash.edu [Department of Biochemistry and Molecular Biology, Building 77, Monash University, Wellington Rd, Clayton, Vic 3800 (Australia); Rajapakse, Niwanthi W. [Department of Physiology, Building 13F, Monash University, Wellington Rd, Clayton, Vic 3800 (Australia); Minond, Dmitriy [Torrey Pines Institute for Molecular Studies, 11350 SW Village Parkway, Port Saint Lucie, FL 34987 (United States); Smith, A. Ian [Department of Biochemistry and Molecular Biology, Building 77, Monash University, Wellington Rd, Clayton, Vic 3800 (Australia)

    2014-04-04

    Highlights: • A soluble full-length form of Neprilysin exists in media of endothelial cells. • Exosomal release is the key mechanism for the production of soluble Neprilysin. • Inhibition of ADAM-17 by specific inhibitors reduce Neprilysin release. • Exosome mediated release of Neprilysin is dependent on ADAM-17 activity. - Abstract: A non-membrane bound form of Neprilysin (NEP) with catalytic activity has the potential to cleave substrates throughout the circulation, thus leading to systemic effects of NEP. We used the endothelial cell line Ea.hy926 to identify the possible role of exosomes and A Disintegrin and Metalloprotease 17 (ADAM-17) in the production of non-membrane bound NEP. Using a bradykinin based quenched fluorescent substrate (40 μM) assay, we determined the activity of recombinant human NEP (rhNEP; 12 ng), and NEP in the media of endothelial cells (10% v/v; after 24 h incubation with cells) to be 9.35 ± 0.70 and 6.54 ± 0.41 μmols of substrate cleaved over 3 h, respectively. The presence of NEP in the media was also confirmed by Western blotting. At present there are no commercially available inhibitors specific for ADAM-17. We therefore synthesised two inhibitors TPI2155-14 and TPI2155-17, specific for ADAM-17 with IC{sub 50} values of 5.36 and 4.32 μM, respectively. Treatment of cells with TPI2155-14 (15 μM) and TPI2155-17 (4.3 μM) resulted in a significant decrease in NEP activity in media (62.37 ± 1.43 and 38.30 ± 4.70, respectively as a % of control; P < 0.0001), implicating a possible role for ADAM-17 in NEP release. However, centrifuging media (100,000g for 1 h at 4 °C) removed all NEP activity from the supernatant indicating the likely role of exosomes in the release of NEP. Our data therefore indicated for the first time that NEP is released from endothelial cells via exosomes, and that this process is dependent on ADAM-17.

  7. One-phase synthesis of gold nanoparticles with varied solubility.

    Science.gov (United States)

    Dubavik, Aliaksei; Lesnyak, Vladimir; Gaponik, Nikolai; Eychmüller, Alexander

    2011-08-16

    We developed a straightforward synthesis of gold nanoparticles with diameters in the range 2.1-7.0 nm which display solubility in both aqueous and nonpolar (toluene, chloroform) media. This versatile solubility of the nanoparticles is achieved by the use of a thiolated PEG capping agent. Their plasmon resonance band is virtually unaltered in different media.

  8. Factors affecting the solubility of Bacillus halmapalus alpha-amylase

    DEFF Research Database (Denmark)

    Faber, Cornelius; Hobley, Timothy John; Mollerup, Jørgen

    2008-01-01

    A detailed study of the solubility of recombinant Bacillus halmapalus alpha-amylase has been conducted. A semi-purified preparation from a bulk crystallisation was chos en that contained six isoforms with pI-values of between 5.5 and 6.1. The solubility was strongly affected by pH and could...

  9. A Lab Experiment to Introduce Gas/Liquid Solubility

    Science.gov (United States)

    Fonsecaa, I. M. A.; Almeida, J. P. B.; Fachada, H. C.

    2008-01-01

    A simplified version of a volumetric apparatus for gas/liquid solubility measurements is proposed. The procedure familiarizes undergraduate students with the experimental study of the solubility of a gas in a liquid and contributes to the understanding of this important phase equilibrium concept. The experimental results report the determination…

  10. Solubilities of sub- and supercritical carbon dioxide in polyester resins

    NARCIS (Netherlands)

    Nalawade, SP; Picchioni, F; Janssen, LPBM; Patil, VE; Keurentjes, JTF; Staudt, R; Nalawade, Sameer P.; Patil, Vishal E.; Keurentjes, Jos T.F.

    2006-01-01

    In supercritical carbon dioxide (CO2) assisted polymer processes the solubility of CO2 in a polymer plays a vital role. The higher the amount of CO2 dissolved in a polymer the higher is the viscosity reduction of the polymer. Solubilities Of CO2 in polyester resins based on propoxylated bisphenol (P

  11. Facilitating protein solubility by use of peptide extensions

    Science.gov (United States)

    Freimuth, Paul I; Zhang, Yian-Biao; Howitt, Jason

    2013-09-17

    Expression vectors for expression of a protein or polypeptide of interest as a fusion product composed of the protein or polypeptide of interest fused at one terminus to a solubility enhancing peptide extension are provided. Sequences encoding the peptide extensions are provided. The invention further comprises antibodies which bind specifically to one or more of the solubility enhancing peptide extensions.

  12. Genetic Analyses of Soluble Carbohydrate Concentrations in Onion Bulbs

    Science.gov (United States)

    Fructans are the primary soluble carbohydrate in onion (Allium cepa L.) bulbs and show significant correlations with dry weights and pungency. In this research, we estimated the genetic effects and interactions between two chromosome regions associated with higher amounts of soluble carbohydrates i...

  13. Cloud condensation nuclei activation of limited solubility organic aerosol

    Science.gov (United States)

    Huff Hartz, Kara E.; Tischuk, Joshua E.; Chan, Man Nin; Chan, Chak K.; Donahue, Neil M.; Pandis, Spyros N.

    The cloud condensation nuclei (CCN) activation of 19 organic species with water solubilities ( Csat) ranging from 10 -4 to 10 2 g solute 100 g -1 H 2O was measured. The organic particles were generated by nebulization of an aqueous or an alcohol solution. Use of alcohols as solvents enables the measurement of low solubility, non-volatile organic CCN activity and reduces the likelihood of residual water in the aerosol. The activation diameter of organic species with very low solubility in water ( Csat<0.3 g 100 g -1 H 2O) is in agreement with Köhler theory using the bulk solubility (limited solubility case) of the organic in water. Many species, including 2-acetylbenzoic acid, aspartic acid, azelaic acid, glutamic acid, homophthalic acid, phthalic acid, cis-pinonic acid, and salicylic acid are highly CCN active in spite of their low solubility (0.3 g 100 g -1 H 2O< Csat<1 g 100 g -1 H 2O), and activate almost as if completely water soluble. The CCN activity of most species is reduced, if the particles are produced using non-aqueous solvents. The existence of the particles in a metastable state at low RH can explain the observed enhancement in CCN activity beyond the levels suggested by their solubility.

  14. Observations on the Apparent Solubility of Carbonate-Apatites.

    Science.gov (United States)

    Shellis; Lee; Wilson

    1999-10-15

    Previousreports indicating that the apparent solubilities of carbonate-apatites are low appear to conflict with findings that carbonate incorporation into the apatite structure tends to reduce stability. Carbonate-apatites were prepared by a precipitation method and by hydrolysis of monetite and brushite. Apparent solubility profiles were determined by measuring dissolution after exposure for 24 h to acetate buffers with known saturations with respect to hydroxyapatite. All preparations showed a range of apparent solubilities, in agreement with previous work. Precipitated samples had higher apparent solubilities than samples prepared by hydrolysis and this was correlated with differences in crystallinity. Further experiments showed that pyrophosphate ion reduced the apparent solubility, but it was concluded that pyrophosphate occurring naturally in synthetic apatites would be insufficient to cause low apparent solubilities. Microscopical observations showed that precipitated carbonate-apatites were composed of small crystals of uniform size, whereas carbonate-apatites prepared by hydrolysis consisted of both small crystals and very large crystals. The low apparent solubilities observed in the latter preparations are attributed to the large crystals. The surface phenomena possibly involved in apparent solubility behavior are discussed. Copyright 1999 Academic Press.

  15. Aqueous solubility prediction: do crystal lattice interactions help?

    Science.gov (United States)

    Salahinejad, Maryam; Le, Tu C; Winkler, David A

    2013-07-01

    Aqueous solubility is a very important physical property of small molecule drugs and drug candidates but also one of the most difficult to predict accurately. Aqueous solubility plays a major role in drug delivery and pharmacokinetics. It is believed that crystal lattice interactions are important in solubility and that including them in solubility models should improve the accuracy of the models. We used calculated values for lattice energy and sublimation enthalpy of organic molecules as descriptors to determine whether these would improve the accuracy of the aqueous solubility models. Multiple linear regression employing an expectation maximization algorithm and a sparse prior (MLREM) method and a nonlinear Bayesian regularized artificial neural network with a Laplacian prior (BRANNLP) were used to derive optimal predictive models of aqueous solubility of a large and highly diverse data set of 4558 organic compounds over a normal ambient temperature range of 20-30 °C (293-303 K). A randomly selected test set and compounds from a solubility challenge were used to estimate the predictive ability of the models. The BRANNLP method showed the best statistical results with squared correlation coefficients of 0.90 and standard errors of 0.645-0.665 log(S) for training and test sets. Surprisingly, including descriptors that captured crystal lattice interactions did not significantly improve the quality of these aqueous solubility models.

  16. Le Chatelier's Principle Applied to the Temperature Dependence of Solubility.

    Science.gov (United States)

    Treptow, Richard S.

    1984-01-01

    One effect of temperature is its influence on solubility, and that effect is used as a common example when teaching Le Chatelier's principle. Attempts to clarify the question of whether the principle holds in the case of the solubility of ionic compounds in water by investigating the literature data in detail. (JN)

  17. Solid Phospholipid Dispersions for Oral Delivery of Poorly Soluble Drugs

    DEFF Research Database (Denmark)

    Fong, Sophia Yui Kau; Martins, Susana M; Brandl, Martin;

    2016-01-01

    Celecoxib (CXB) is a Biopharmaceutical Classification System class II drug in which its oral bioavailability is limited by poor aqueous solubility. Although a range of formulations aiming to increase the solubility of CXB have been developed, it is not completely understood, whether (1) an increase...

  18. 21 CFR 520.110 - Apramycin sulfate soluble powder.

    Science.gov (United States)

    2010-04-01

    ...) caused by strains of E. coli sensitive to apramycin. (2) It is administered for 7 days in drinking water... sulfate soluble powder. (a) Specifications. A water soluble powder used to make a medicated drinking water containing apramycin sulfate equivalent to 0.375 gram of apramycin activity per gallon of drinking water....

  19. [Dynamic QTL and correlated characters of tomato soluble solid content.].

    Science.gov (United States)

    Jia, Jun-Zhong; Tian, Li-Ping; Xue, Lin; Wei, Yi-Nong

    2010-10-01

    Two hundred and six F2:3 families from the cross between TD22 and HT-1-1-1-1 were used for dynamic QTL research of tomato soluble solid content and correlative traits, and correlation analysis of soluble solid content (SSC) with fruit weight (FW), fruit shape index (FSI), soluble sugar, vitamin C (VC), and organic acid at three different development stages. The results showed that there were differences in QTL loci for soluble solid content during the three stages of tomato fruit development. Four and eight QTLs were detected in green ripe stage and red ripe stage, respectively. These QTLs showed dynamic changes, and two markers LEaat006 and Tomato|TC162363 were detected in two stages, which might be useful in molecular-marker assisted selection (MAS). The result also showed that there was extremely significant difference in SSC at the three different stages, and its main correlative traits were different at different stages. Soluble solid content was positively correlated with soluble sugar, but negatively correlated with FW at green ripe stage; SSC was positively correlated with soluble sugar and organic acid at yellow ripe stage; SSC was positively correlated with soluble sugar and organic acid, but negatively correlated with fruit weight at red ripe stage. Based on correlation analysis of these traits, linear regression model was constructed. Non-tested varieties were used to test the fitness, and the result showed that it is well fitted, and the fitness is above 95%.

  20. Solubility of hydrogen in octane, 1-octanol, and squalane

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.J.; Way, T.R.; Feldman, K.T. Jr. [Thermal Electric Devices, Inc., Albuquerque, NM (United States); Razani, A. [Univ. of New Mexico, Albuquerque, NM (United States). Mechanical Engineering Dept.

    1997-01-01

    The solubilities of hydrogen in various liquids were measured over the pressure ranges from 690 to 1,380 kPa at a temperature of 22 C by using the modified Benson and Krause method. The liquids include octane, 1-octanol, and squalane. The solubility increases with increasing pressure and is described by Henry`s Law.

  1. Solubilities of Isophthalic Acid in Acetic Acid + Water Solvent Mixtures

    Institute of Scientific and Technical Information of China (English)

    CHENG Youwei; HUO Lei; LI Xi

    2013-01-01

    The solubilities of isophthalic acid (1) in binary acetic acid (2) + water (3) solvent mixtures were determined in a pressurized vessel.The temperature range was from 373.2 to 473.2K and the range of the mole fraction of acetic acid in the solvent mixtures was from x2 =0 to 1.A new method to measure the solubility was developed,which solved the problem of sampling at high temperature.The experimental results indicated that within the temperature range studied,the solubilities of isophthalic acid in all mixtures showed an increasing trend with increasing temperature.The experimental solubilities were correlated by the Buchowski equation,and the calculate results showed good agreement with the experimental solubilities.Furthermore,the mixed solvent systems were found to exhibit a maximum solubility effect on the solubility,which may be attributed to the intermolecular association between the solute and the solvent mixture.The maximum solubility effect was well modeled by the modified Wilson equation.

  2. Purification and characterization of a soluble calnexin from human placenta

    DEFF Research Database (Denmark)

    Olsen, Dorthe T; Peng, Li; Træholt, Sofie D;

    2013-01-01

    Calreticulin (Crt) and calnexin (Cnx) are homologous endoplasmic reticulum (ER) chaperones involved in protein folding and quality control. Crt is a soluble ER luminal Mr 46 kDa protein and Cnx is a Mr 67kDa ER membrane protein. During purification of Crt from human placenta a soluble form of Cnx...

  3. Zinc solubility and fractionation in cultivated calcareous soils irrigated with wastewater.

    Science.gov (United States)

    Nazif, W; Marzouk, E R; Perveen, S; Crout, N M J; Young, S D

    2015-06-15

    The solubility, lability and fractionation of zinc in a range of calcareous soils from Peshawar, Pakistan were studied (18 topsoils and 18 subsoils). The lability (E-value) of Zn was assessed as the fraction isotopically exchangeable with (70)Zn(2+); comparative extractions included 0.005 M DTPA, 0.43 M HNO3 and a Tessier-style sequential extraction procedure (SEP). Because of the extremely low concentration of labile Zn the E-value was determined in soils suspended in 0.0001 M Na2-EDTA which provided reliable analytical conditions in which approximately 20% of the labile Zn was dissolved. On average, only 2.4% of soil Zn was isotopically exchangeable. This corresponded closely to Zn solubilised by extraction with 0.005 DTPA and by the carbonate extraction step (F1+F2) of the Tessier-style SEP. Crucially, although the majority of the soil CaCO3 was dissolved in F2 of the SEP, the DTPA dissolved only a very small proportion of the soil CaCO3. This suggests a superficial carbonate-bound form of labile Zn, accessible to extraction with DTPA and to isotopic exchange. Zinc solubility from soil suspended in 0.01 M Ca(NO3)2 (PCO2 controlled at 0.03) was measured over three days. Following solution speciation using WHAM(VII) two simple solubility models were parameterised: a pH dependent 'adsorption' model based on the labile (isotopically exchangeable) Zn distribution coefficient (Kd) and an apparent solubility product (Ks) for ZnCO3. The distribution coefficient showed no pH-dependence and the solubility model provided the best fit to the free ion activity (Zn(2+)) data, although the apparent value of log10 Ks (5.1) was 2.8 log units lower than that of the mineral smithsonite (ZnCO3).

  4. The solubility of toluene in aqueous salt solutions.

    Science.gov (United States)

    Poulson, S; Harrington, R; Drever, J

    1999-03-01

    The solubility of toluene has been measured in distilled water, and in various inorganic salt solutions. Values of the Setschenow constant, K(S), which quantify toluene solubility versus salt concentration, have been determined for each salt. Values of K(S) are compared to the activity of water for the salt solutions. Data from this study, consistent with earlier data, suggests that the effects of salts upon toluene solubility are non-additive. This contrasts the additive behavior of inorganic salts upon the solubility of nonpolar organic compounds, such as benzene and naphthalene, reported in the literature. Specific interaction between slightly polar toluene and ions in solution is suggested as a possible explanation for the non-additive effect of salts on the solubility of toluene.

  5. Surface state of carbon nanotubes and Hansen solubility parameters.

    Science.gov (United States)

    Detriche, S; Nagy, J B; Mekhalif, Z; Delhalle, J

    2009-10-01

    Carbon nanotubes (CNTs) are often described as insoluble or poorly soluble in organic solvents. In a recent study, we have reported that nonfunctionalized CNTs can be solubilized in suitably chosen organic solvents. Furthermore, their solubility could be understood in terms of the Hansen Solubility Parameters (HSPs). The present work addresses further the question of the CNTs solubility by considering a larger range of solvents. A second part is devoted to the application of the HSPs to two types of functionalized CNTs: oxidized and silanized. These results stress the critical role played by the surface state of the CNTs, on the one hand, and the interest in using the HSPs to guide solubility investigations, on the other hand.

  6. Molecular model for solubility of gases in flexible polymers

    DEFF Research Database (Denmark)

    Neergaard, Jesper; Hassager, Ole; Szabo, Peter

    1999-01-01

    We propose a model for a priori prediction of the solubility of gases in flexible polymers. The model is based on the concept of ideal solubility of gases in liquids. According to this concept, the mole fraction of gases in liquids is given by Raoult's law with the total pressure and the vapor...... the length of the rods with the molecular weight corresponding to a Kuhn step. The model provides a tool for crude estimation of the gas solubility on the basis of only the monomer unit of the polymer and properties of the gas. A comparison with the solubility data for several gases in poly......(dimethylsiloxane) reveals agreement between the data and the model predictions within a factor of 7 and that better model results are achieved for temperatures below the critical temperature of the gas. The model predicts a decreasing solubility with increasing temperature (because of the increasing vapor pressure...

  7. Solubility, photostability and antifungal activity of phenylpropanoids encapsulated in cyclodextrins.

    Science.gov (United States)

    Kfoury, Miriana; Lounès-Hadj Sahraoui, Anissa; Bourdon, Natacha; Laruelle, Frédéric; Fontaine, Joël; Auezova, Lizette; Greige-Gerges, Hélène; Fourmentin, Sophie

    2016-04-01

    Effects of the encapsulation in cyclodextrins (CDs) on the solubility, photostability and antifungal activities of some phenylpropanoids (PPs) were investigated. Solubility experiments were carried out to evaluate the effect of CDs on PPs aqueous solubility. Loading capacities and encapsulation efficiencies of freeze-dried inclusion complexes were determined. Moreover, photostability assays for both inclusion complexes in solution and solid state were performed. Finally, two of the most widespread phytopathogenic fungi, Fusarium oxysporum and Botrytis cinerea, were chosen to examine the antifungal activity of free and encapsulated PPs. Results showed that encapsulation in CDs significantly increased the solubility and photostability of studied PPs (by 2 to 17-fold and 2 to 44-fold, respectively). Free PPs revealed remarkable antifungal properties with isoeugenol showing the lowest half-maximal inhibitory concentration (IC50) values of mycelium growth and spore germination inhibition. Encapsulated PPs, despite their reduced antifungal activity, could be helpful to solve drawbacks such as solubility and stability.

  8. New Biopolymer Nanoparticles Improve the Solubility of Lipophilic Megestrol Acetate

    Directory of Open Access Journals (Sweden)

    Malwina Lachowicz

    2016-02-01

    Full Text Available As many substances are poorly soluble in water and thus possess decreased bioavailability, creating orally administered forms of these substances is a challenge. The objective of this study was to determine whether the solubility of megestrol acetate, a Biopharmaceutical Classification System (BCS class II drug, can be improved by using a newly-synthesized surfactant (Rofam 70: a rapeseed methyl ester ethoxylate and compare it with two references surfactants (Tween 80, Pluronic F68 at three different pH values. Spectrophotometry was used to compare the solubility profiles in the presence of three tested surfactants at pH 5.0, 7.4 and 9.0. Rapeseed methyl ester ethoxylate was found to improve the solubility of the BCS Class II drug and increase its bioavailability; It increased drug solubility more effectively than Pluronic F68. Its cytotoxicity results indicate its possible value as a surfactant in Medicine and Pharmacy.

  9. [Soluble brain proteins in autosomal trisomy syndromes].

    Science.gov (United States)

    Mikhneva, L M; Baryshevskaia, V D

    1981-01-01

    The authors examined the soluble proteins of the brain frontal lobes in the newborn with trisomias of the 13th, 18th, and 21st chromosomes (Down's, Patau's, and Edwards' syndromes). The examinations were carried out on autopsy material (the post-mortem period not exceeding 24 hours) by the method of disc electrophoresis in polyacrylamide gel. The brain tissue was taken from 17 newborn infants with Down's syndrome; 9 infants with Patau's syndrome; and 7 infants with Edwards' syndrome. For the control the brain of 21 newborn infants without defects of the CNS development (the death cause being analogous) was taken. In all the syndromes studied diversely directed but relatively specific shifts were revealed on the proteinograms. It was the albumin section which appeared to be the most sensitive to the chromosomal pathology: in cases of Down's and Patau's syndromes the protein content in it was reduced, whereas in cases of Edwards' syndrome it was increased. In the latter syndrome the relative amount of neuronines S-5 and S-6, and in Patau's syndrome the amount of neuronine S-6 were lowered, this lowering being statistically significantly. In all the trisomias a tendency to a diminution of the zone of the acidic neurospecific cerebral proteins was noted. This is, possibly, due to the lower level of the CNS functional activity in chromosomal pathologies.

  10. Bicarbonate-Regulated Soluble Adenylyl Cyclase

    Directory of Open Access Journals (Sweden)

    Wuttke MS

    2001-07-01

    Full Text Available Soluble adenylyl cyclase (sAC represents a novel form of mammalian adenylyl cyclase structurally, molecularly, and biochemically distinct from the G protein-regulated, transmembrane adenylyl cyclases (tmACs. sAC possesses no transmembrane domains and is insensitive to classic modulators of tmACs, such as heterotrimeric G proteins and P site ligands. Thus, sAC defines an independently regulated cAMP signaling system within mammalian cells. sAC is directly stimulated by bicarbonate ion both in vivo in heterologously expressing cells and in vitro using purified protein. sAC appears to be the predominant form of adenylyl cyclase (AC in mammalian sperm, and its direct activation by bicarbonate provides a mechanism for generating the cAMP required to complete the bicarbonate-induced processes necessary for fertilization, including hyperactivated motility, capacitation, and the acrosome reaction. Immunolocalization studies reveal sAC is also abundantly expressed in other tissues which respond to bicarbonate or carbon dioxide levels suggesting it may function as a general bicarbonate/CO(2 sensor throughout the body.

  11. Soluble serum Klotho levels in healthy subjects

    DEFF Research Database (Denmark)

    Pedersen, Lise Mariager; Pedersen, Susanne Møller; Brasen, Claus Lohman

    2013-01-01

    OBJECTIVE: Soluble serum Klotho, is a new biomarker linked to chronic kidney disease, cardiovascular disease and diabetes. This study describes the evaluation and comparison of two different immunoassays and establishment of assay specific reference intervals in adults. Design and methods Serum...... of serum Klotho. RESULTS: Serum Klotho levels were significantly higher in time-resolved fluorescence immunoassay (TRF) compared to an ELISA (IBL) and no correlation were found between the assays. No signal was obtained in either assay when the standard curve was switched between the two different...... immunoassays. The median serum Klotho concentration using TRF was 61ng/mL (2.5-97.5% reference limits; 11-181ng/mL) for males and 99ng/mL (2.5-97.5% reference limits; 19-316ng/mL) for females while the ELISA gave a mean value of 472pg/mL (2.5-97.5% reference limits; 204-741pg/mL) with no difference between...

  12. Droplet evaporation on a soluble substrate

    Science.gov (United States)

    Mailleur, Alexandra; Pirat, Christophe; Colombani, Jean; CNES Collaboration

    2015-11-01

    Stains left by evaporated droplets are ubiquitous in everyday life as well as in industrial processes. Whatever the composition of the evaporating liquid (colloidal suspensions, biological fluids...), the stains are mostly constituted by a deposit at the periphery of the dried drop, similar to a coffee stain (Deegan, 1997). All these studies have been carried with non-reacting solids. In this presentation, we focus on the behavior of a pure-water droplet evaporating on a soluble substrate which is more complex, since three phenomena are strongly interacting: the dissolution of the substrate, the diffusion/convection of the dissolved species into the drop and the evaporation of the liquid. NaCl and KCl single crystals have been chosen for this experimental study as they are fast-dissolving solids. We have observed that the dissolution induces a pinning of the triple line from the beginning of the evaporation, leading to a decrease of the contact angle in time. At the end of the evaporation, a peripheral deposit is always formed, proof of an outward flow inside the drop (coffee-ring effect). The authors would like to thank the CNES for the financial support.

  13. 可溶性晚期糖基化终末产物受体在急性呼吸窘迫综合征患者诊断及预后评估中的应用价值%Application Value of Soluble Receptor of Advanced Glycation End products in the Diagnostic and prognostic Assessment of patients With Acute Respiratory Distress Syndrome

    Institute of Scientific and Technical Information of China (English)

    胡占升

    2014-01-01

    目的:探讨可溶性晚期糖基化终末产物受体(sRAGE)在急性呼吸窘迫综合征(ARDS)患者诊断及预后预测中的价值。方法选取2012年3月-2013年3月入住辽宁医学院附属第一医院重症监护病房的 ARDS 患者60例为 ARDS 组,根据氧合指数(PaO2/ FiO2)将 ARDS 组分为轻度 ARDS 组(23例)、中度 ARDS 组(23例)及重度ARDS 组(14例),根据预后分为死亡组(18例)及存活组(42例);另选择同时期入住重症监护病房的非 ARDS 患者60例为非 ARDS 组。采用酶联免疫吸附试验(ELISA)法检测患者血浆 sRAGE 水平,记录患者PaO2/ FiO2。结果ARDS 组较非 ARDS 组患者 sRAGE 水平升高,PaO2/ FiO2降低,差异有统计学意义(P é0.05)。不同严重程度 ARDS 组患者 sRAGE 水平及PaO2/ FiO2比较,差异均有统计学意义(P é0.05);其中中度 ARDS 组、重度 ARDS 组较轻度 ARDS组,重度 ARDS 组较中度 ARDS 组患者 sRAGE 水平升高,PaO2/ FiO2降低,差异有统计学意义(P é0.05)。死亡组较存活组 ARDS 患者 sRAGE 水平升高,PaO2/ FiO2降低,差异有统计学意义( P é0.05)。直线相关性分析显示,ARDS组患者 sRAGE 水平与PaO2/ FiO2呈负相关(r =-0.949,P =0.0002)。结论 sRAGE 在 ARDS 患者预后预测方面存在价值,可作为评价 ARDS 预后的一个生化标记物;在诊断方面可能存在一定价值,有待于进一步研究验证。%Objective To discuss the application value about soluble receptor for advanced glycation end products (sRAGE)in the diagnostic and prognostic assessment of patients with acute respiratory distress syndrome(ARDS)in the inten-sive care unit(ICU). Methods 60 ARDS patients admitted to the First Affiliated Hospital of Liaoning Medical University from March 2012 to March 2013 were selected. The patients were divided into mild group(23 cases),moderate group(23 cases)and severe group(14 cases)based on o

  14. Small acid soluble proteins for rapid spore identification.

    Energy Technology Data Exchange (ETDEWEB)

    Branda, Steven S.; Lane, Todd W.; VanderNoot, Victoria A.; Jokerst, Amanda S.

    2006-12-01

    This one year LDRD addressed the problem of rapid characterization of bacterial spores such as those from the genus Bacillus, the group that contains pathogenic spores such as B. anthracis. In this effort we addressed the feasibility of using a proteomics based approach to spore characterization using a subset of conserved spore proteins known as the small acid soluble proteins or SASPs. We proposed developing techniques that built on our previous expertise in microseparations to rapidly characterize or identify spores. An alternative SASP extraction method was developed that was amenable to both the subsequent fluorescent labeling required for laser-induced fluorescence detection and the low ionic strength requirements for isoelectric focusing. For the microseparations, both capillary isoelectric focusing and chip gel electrophoresis were employed. A variety of methods were evaluated to improve the molecular weight resolution for the SASPs, which are in a molecular weight range that is not well resolved by the current methods. Isoelectric focusing was optimized and employed to resolve the SASPs using UV absorbance detection. Proteomic signatures of native wild type Bacillus spores and clones genetically engineered to produce altered SASP patterns were assessed by slab gel electrophoresis, capillary isoelectric focusing with absorbance detection as well as microchip based gel electrophoresis employing sensitive laser-induced fluorescence detection.

  15. Differential solubility of curcuminoids in serum and albumin solutions: implications for analytical and therapeutic applications

    Directory of Open Access Journals (Sweden)

    Quitschke Wolfgang W

    2008-11-01

    serum. Conclusion These results suggest the possibility of alternative therapeutic approaches by injection or infusion of relatively small amounts of curcuminoid-enriched serum. They also provide tools to reproducibly solubilize curcuminoids for analysis in cell culture applications. The differential solubility of curcuminoids achieved by different methods of solubilization offers convenient alternatives to assess the diverse biological effects contributed by curcumin and its derivatives.

  16. Development of supercritical fluid extraction and supercritical fluid chromatography purification methods using rapid solubility screening with multiple solubility chambers.

    Science.gov (United States)

    Gahm, Kyung H; Huang, Ke; Barnhart, Wesley W; Goetzinger, Wolfgang

    2011-01-01

    Rapid solubility screening in diverse supercritical fluids (SCFs) was carried out via multiple solubility chambers with a trapping device and online ultraviolet (UV) detection. With this device, it was possible to rapidly study the solubility variations of multiple components in a mixture. Results from solubility studies have been used to develop efficient supercritical fluid extraction (SFE) and supercritical fluid chromatography (SFC) methods. After the investigation of solubilities of theophylline and caffeine in several neat organic solvents and SCFs, advantages of SFE over conventional organic solvent extraction were demonstrated with a model mixture of theophylline and caffeine. The highest solubility ratio of 1:40 (theophylline:caffeine) was observed in the SCF with 20% acetonitrile (MeCN), where a ratio of 1:11 was the highest in the neat organic solvents. A model mixture of theophylline:caffeine (85:15 w/w, caffeine as an impurity) was successfully purified by SFE by leveraging the highest solubility difference. The SCF with 20% MeCN selectively removed caffeine and left theophylline largely intact. Rapid SCF solubility screening was applied to development of SFE and SFC methods in a drug discovery environment. Two successful applications were demonstrated with proprietary Amgen compounds to either remove an achiral impurity before chiral purification or enhance chiral chromatographic throughput.

  17. Serum Levels of Soluble Fas Ligand and Soluble Fas Receptor in Patients with Chronic Congestive Heart Failure

    Institute of Scientific and Technical Information of China (English)

    李刚; 令狐华; 魏良明

    2002-01-01

    @@ To understand the pathophysiologic significances of soluble Fas Ligand (sFasL) and soluble Fas receptor (sFas) in chronic congestive heart failure (CHF) and to determine the relationship of circulating levels of sFasL and sFas to the severity of CHF, the serum sFasL and sfas levels were evaluated in patients with CHF.

  18. AN OVERVIEW ON SOLUBILITY ENHANCEMENT TECHNIQUES FOR POORLY SOLUBLE DRUGS AND SOLID DISPERSION AS AN EMINENT STRATEGIC APPROACH

    Directory of Open Access Journals (Sweden)

    Sandhiya Jatwani et al.

    2012-04-01

    Full Text Available Solubility is an important parameter to achieve desired concentration of drug in systemic circulation for pharmacological response to be shown. Among all newly discovered chemical entities most of the drugs are lipophillic and fail to reach market due to their poor water solubility. The solubility behavior remains one of the most challenging aspect informational development. Hence various techniques are used for the improvement of solubility of poorly water soluble drugs which include micronization, chemical modification, pH adjustment, solid dispersion, complexation, co-solvency micellar solubilization, hydrotrophy etc. Of all these approaches solid dispersion have attracted tremendous interest as an efficient means of improving the dissolution rate and hence the bioavailability to arrange of hydrophobic drugs. This article reviews the various preparation techniques and types of solid dispersion based on molecular arrangement. Finally some of the practical aspects have also been considered for the preparation of dispersions.

  19. Amphotericin B lipid soluble formulations versus amphotericin B in cancer patients with neutropenia

    DEFF Research Database (Denmark)

    Johansen, Helle Krogh; Gøtzsche, Peter C

    2014-01-01

    BACKGROUND: Patients with cancer who are treated with chemotherapy or receive a bone marrow transplant have an increased risk of acquiring fungal infections. Such infections can be life-threatening. Antifungal drugs are therefore often given prophylactically to such patients, or when they have...... a fever. OBJECTIVES: To compare the benefits and harms of lipid soluble formulations of amphotericin B with conventional amphotericin B in cancer patients with neutropenia. SEARCH METHODS: We searched PubMed from 1966 to 7 July 2014 and the reference lists of identified articles. SELECTION CRITERIA......: Randomised clinical trials comparing lipid soluble formulations of amphotericin B with conventional amphotericin B. DATA COLLECTION AND ANALYSIS: The two review authors independently assessed trial eligibility and risk of bias and abstracted data. MAIN RESULTS: We found 13 trials (1960 patients). Lipid...

  20. C-106 High-Level Waste Solids: Washing/Leaching and Solubility Versus Temperature Studies

    Energy Technology Data Exchange (ETDEWEB)

    GJ Lumetta; DJ Bates; PK Berry; JP Bramson; LP Darnell; OT Farmer III; LR Greenwood; FV Hoopes; RC Lettau; GF Piepel; CZ Soderquist; MJ Steele; RT Steele; MW Urie; JJ Wagner

    2000-01-26

    This report describes the results of a test conducted by Battelle to assess the effects of inhibited water washing and caustic leaching on the composition of the Hanford tank C-106 high-level waste (HLW) solids. The objective of this work was to determine the composition of the C-106 solids remaining after washing with 0.01M NaOH or leaching with 3M NaOH. Another objective of this test was to determine the solubility of various C-106 components as a function of temperature. The work was conducted according to test plan BNFL-TP-29953-8,Rev. 0, Determination of the Solubility of HLW Sludge Solids. The test went according to plan, with only minor deviations from the test plan. The deviations from the test plan are discussed in the experimental section.

  1. Expression of soluble Toll-like receptors in pleural effusions

    Institute of Scientific and Technical Information of China (English)

    YANG Hai-bo; XIE Kai-qing; DENG Jing-min; QIN Shou-ming

    2010-01-01

    Background The Toll-like receptors (TLRs) represent a group of single-pass transmembrane receptors expressed on sentinel cells that are central to innate immune responses.The aim of this study was to investigate the presence of soluble TLRs in pleural effusions, and the diagnostic values of TLRs for pleural effusion with various etiologies.Methods Pleural effusion and serum samples were collected from 102 patients (36 with malignant pleural effusion, 36with tuberculous pleural effusion, 18 with bacterial pleural effusion, and 12 with transudative pleural effusion).The concentrations of TLR1 to TLR10 were determined in effusion and serum samples by enzyme linked immunosorbent assay.Four classical parameters (protein, lactate dehydrogenase, glucose and C-reactive protein (CRP)) in the pleural fluid were also assessed.Receiver-operating characteristic curves were used to assess the sensitivity and specificity of pleural fluid TLRs and biochemical parameters for differentiating bacterial pleural effusion.Results The concentrations of TLR1, TLR3, TLR4, TLR7 and TLR9 in bacterial pleural effusion were significantly higher than those in malignant, tuberculous, and transudative groups, respectively.Analysis of receiver operating characteristic curves revealed that the area under the curves of TLR1, TLR3, TLR4, TLR7 and TLR9 were 0.831, 0.843,0.842, 0.883 and 0.786, respectively, suggesting that these TLRs play a role in the diagnosis of bacterial pleural effusion.Also, the diagnostic value of TLRs for bacterial pleural effusions was much better than that of biochemical parameters (protein, lactate dehydrogenase, glucose and CRP).Conclusions The concentrations of TLR1, TLR3, TLR4, TLR7 and TLR9 appeared to be increased in bacterial pleural effusion compared to non-bacterial pleural effusions.Determination of these pleural TLRs may improve the ability of clinicians to differentiate pleural effusion patients of bacterial origin from those with other etiologies.

  2. Ion Association versus Ion Interaction Models in Examining Electrolyte Solutions: Application to Calcium Hydroxide Solubility Equilibrium

    Science.gov (United States)

    Menéndez, M. Isabel; Borge, Javier

    2014-01-01

    The heterogeneous equilibrium of the solubility of calcium hydroxide in water is used to predict both its solubility product from solubility and solubility values from solubility product when inert salts, in any concentration, are present. Accepting the necessity of including activity coefficients to treat the saturated solution of calcium…

  3. Soluble Thrombomodulin and Major Orthopedic Surgery

    Directory of Open Access Journals (Sweden)

    Irina P. Antropova

    2016-09-01

    Full Text Available Background: A high level of soluble thrombomodulin (sTM is associated with a lower risk of thrombosis but can cause severe bleeding after operations. Deep vein thrombosis (DVT and blood loss are serious threats after orthopedic surgery. The aim of our pilot study was to evaluate the effect of the preoperative level of sTM on coagulation and inflammation as well as the blood loss and the development of symptomatic DVT after total large joint replacement. Methods and Results: In all patients (n=50 who underwent total hip or knee replacement, sTM, PrC, D-dimer, vWF, CRP, and platelets were determined before and after the operation. According to the preoperative sTM level, patients were divided into 2 groups: the thrombomodulin low (TML group (n=25 and thrombomodulin high (TMH group (n=25. The concentration of sTM was 4.4 [3.4, 4.7] ng/ml in the TML-group and 8.7[7.3, 10.6] ng/ml in the TMH-group. After surgery, D-dimer, vWF, platelet count and CRP were higher and total blood loss was lower in the TML group. In the TML-group, a symptomatic DVT was detected in 3(12% patients; in the TMH-group, a symptomatic DVT was identified only in 1(4% case. Conclusion: These findings support the important role of sTM in coagulation, inflammation, bleeding, and presumably in venous thrombosis after major orthopedic surgery.

  4. Prediction of benzodiazepines solubility using different cosolvency models.

    Science.gov (United States)

    Nokhodchi, A; Shokri, J; Barzegar-Jalali, M; Ghafourian, T

    2002-07-01

    The solubility of four benzodiazepines (BZPs) including diazepam (DIZ), lorazepam (LRZ) clonazepam (CLZ), and chlordiazepoxide (CHZ) in water-cosolvent (ethanol propylene glycol and polyethylene glycol 200) binary systems were studied. In general, increasing the volume fraction of cosolvents resulted in an increase in the solubility of benzodiazepines. The mole fraction solubilities were fitted to the various cosolvency models, namely extended Hildebrand approach (EHA), excess free energy (EFE), combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K), general single model (GSM), mixture response surface (MR-S). double log-log (DL-L), and linear double log-log (LDL-L). The results showed that DL-L model was the best model in predicting the solubility of all drugs in all the water-cosolvent mixtures (OAE% = 4.71). The minimum and maximum errors were observed for benzodiazepine's solubility in water-propylene glycol and water-ethanol mixtures which were 2.67 and 11.78%, respectively. Three models (EFE, CNIBS/R-K and LDL-L) were chosen as general models for solubility descriptions of these structurally similar drugs in each of the solvent systems. Among these models, the EFE model was the best in predicting the solubility of benzodiazepines in binary solvent mixtures (OAE% = 11.19).

  5. Comparative evaluation of various solubility enhancement strategies for furosemide.

    Science.gov (United States)

    Murtaza, Ghulam; Khan, Shujaat Ali; Najam-ul-Haq, Muhammad; Hussain, Izhar

    2014-07-01

    Drugs with good solubility exhibit good oral absorption, and subsequently good bioavailability. Thus, most exigent phase of drug development practice particularly for oral dosage forms is the enhancement of drug solubility. This review describes various traditional and novel methodologies proposed for the solubility enhancement of furosemide. For furosemide, solubility and permeability are crucial rate limiting factors to achieve its desired level in systemic circulation for pharmacological response. Thus, problematic solubility of furosemide is one of the main challenges for dosage form developing researchers. Various procedures, illustrated in this review, have been successfully employed to improve the furosemide solubility; however successful improvement essentially depends on the assortment of technique. It is concluded from the results that dissolution rate of drug increases by increasing the quantity of solubility enhancer. Dissolution rate also depends upon the type of enhancer and dissolution medium. In order to achieve relatively enhanced percentage drug release after 30 min (DP30), complexation by solvent evaporation using β-cyclodextrin is the best method. Solid dispersion is found the best if polyethylene glycol is used as enhancer along with microcrystalline cellulose as hydrophilic adsorbent. All the approaches narrated in this article possess good perceptions for additional research i.e. in-vivo studies should be carried out focusing on delivery system development.

  6. Solubility Enhancement of Raloxifene Using Inclusion Complexes and Cogrinding Method

    Directory of Open Access Journals (Sweden)

    Payal H. Patil

    2013-01-01

    Full Text Available The objective of the present work was to enhance the solubility and dissolution of practically water-insoluble drug raloxifene HCl (RLX, for the same two approaches that were used. In the first approach, drug was kneaded with hydroxypropyl-β-cyclodextrin (HPβCD, and in the second one drug was cogrinded with modified guar gum (MGG. The drug-cyclodextrin complex and drug-MGG cogrind mixtures were characterized by differential scanning calorimetry, X-ray diffraction studies, scanning electron microscopy, and Fourier transform infrared spectroscopy. The solubility and dissolution study reveals that solubility and dissolution rate of RLX remarkably increased in both methods. It was concluded that the prepared inclusion complex showed a remarkable increase in solubility and dissolution of poorly water-soluble drug raloxifene. In the cogrinding mixture, a natural modified gum is used as a surfactant and enhances the solubility and dissolution of RLX without requiring addition of organic solvent or high temperature for its preparation; thus, process is less cumbersome and cost effective. But when both methods were compared; HPβCD complexation method showed significant enhancement of drug solubility.

  7. An Improved Automated Setup for Solubility Determination of Drugs

    Directory of Open Access Journals (Sweden)

    Ahmad Ghanbari 1, Yashar Sarbaz, Vahid Jouyban-Gharamaleki, Karim Jouyban-Gharamaleki, Jafar Soleymani, Abolghasem Jouyban

    2016-09-01

    Full Text Available Background: Solubility of a drug/drug candidate is an essential information in the pharmaceutical area. Classical solubility determination method used in the laboratories are expensive and time-consuming. Attempts were made to provide an automated solubility determination setup based on a laser monitoring technique. Methods: In a previously developed setup, drug powder was added to a given quantity of the solvent which made some troubles in practical applications. The present work reports another setup which adds solvent to a given mass of the drug. The validity of the measured solubilities is checked by comparing the measured solubilities of acetaminophen at two temperatures in water and ethanol mixtures with the corresponding data from the literature. Results: The results reveal that the improved setup could overcome the limitations of the previously developed setup and could be used for drug solubility determination. Conclusion: The improved setup overcomes the troubles made in the previous setup and could be used in generating large amount of solubility data to be used in the pharmaceutical industry.

  8. Uranium (VI) solubility in carbonate-free ERDA-6 brine

    Energy Technology Data Exchange (ETDEWEB)

    Lucchini, Jean-francois [Los Alamos National Laboratory; Khaing, Hnin [Los Alamos National Laboratory; Reed, Donald T [Los Alamos National Laboratory

    2010-01-01

    When present, uranium is usually an element of importance in a nuclear waste repository. In the Waste Isolation Pilot Plant (WIPP), uranium is the most prevalent actinide component by mass, with about 647 metric tons to be placed in the repository. Therefore, the chemistry of uranium, and especially its solubility in the WIPP conditions, needs to be well determined. Long-term experiments were performed to measure the solubility of uranium (VI) in carbonate-free ERDA-6 brine, a simulated WIPP brine, at pC{sub H+} values between 8 and 12.5. These data, obtained from the over-saturation approach, were the first repository-relevant data for the VI actinide oxidation state. The solubility trends observed pointed towards low uranium solubility in WIPP brines and a lack of amphotericity. At the expected pC{sub H+} in the WIPP ({approx} 9.5), measured uranium solubility approached 10{sup -7} M. The objective of these experiments was to establish a baseline solubility to further investigate the effects of carbonate complexation on uranium solubility in WIPP brines.

  9. SULFATE SOLUBILITY LIMIT VERIFICATION FOR DWPF SLUDGE BATCH 7A

    Energy Technology Data Exchange (ETDEWEB)

    Billings, A.

    2011-04-19

    During processing at the Defense Waste Processing Facility (DWPF), high sulfate concentrations in the feed are a concern to DWPF as it can lead to the formation of a detrimental, sulfate-rich, molten salt phase on the surface of the glass melt pool. To avoid these issues, a sulfate concentration limit was implemented into the Product Composition Control System (PCCS). Related to SB7a frit development efforts, the Savannah River National Laboratory (SRNL) assessed the viability of using the current 0.6 wt % SO{sub 4}{sup 2-} limit set for SB6 (in glass) and the possibility of increasing the SO{sub 4}{sup 2-} solubility limit in PCCS to account for anticipated sulfur concentrations, targeted waste loadings, and inclusion of secondary streams (e.g., Actinide Removal Process (ARP)) with two recommended frits (Frit 418 and Frit 702) for SB7a processing. For a nominal SB7a blend with a 63 inch SB6 heel remaining in Tank 40 (projection SB7a-63), a 0.60 wt% SO{sub 4}{sup 2-} in glass limit was determined for waste loadings of 34 wt% up to 40 wt% with Frit 418 based on crucible melts with batched chemicals. SRNL also examined the inclusion of ARP for the same blending scenario (SB7a-63-ARP) with Frit 418 and at least a 0.6 wt% SO{sub 4}{sup 2-} level, and waste loadings of 34 wt% to 40 wt% were also acceptable. When a visible yellow and/or white sulfate salt layer was visible on the surface of any cooled glass, it was assumed to have surpassed the solubility limit of SO{sub 4}{sup 2-} for that particular composition. All of the glasses fabricated at these concentrations did not exhibit a sulfate rich salt layer on the surface of the glass melt and retained the majority of the batched SO{sub 4}{sup 2-}. At higher levels of SO{sub 4}{sup 2-} 'spiked' into the projected sludge compositions over the aforementioned interval of waste loadings, with Frit 418, low viscosity sulfur layers were observed on the surface of glass melts which confirm exceeding the solubility

  10. Melanoma-associated Chondroitin Sulfate Proteoglycan (MCSP-targeted delivery of soluble TRAIL potently inhibits melanoma outgrowth in vitro and in vivo

    Directory of Open Access Journals (Sweden)

    van Waarde Aren

    2010-11-01

    Full Text Available Abstract Background Advanced melanoma is characterized by a pronounced resistance to therapy leading to a limited patient survival of ~6 - 9 months. Here, we report on a novel bifunctional therapeutic fusion protein, designated anti-MCSP:TRAIL, that is comprised of a melanoma-associated chondroitin sulfate proteoglycan (MCSP-specific antibody fragment (scFv fused to soluble human TRAIL. MCSP is a well-established target for melanoma immunotherapy and has recently been shown to provide important tumorigenic signals to melanoma cells. TRAIL is a highly promising tumoricidal cytokine with no or minimal toxicity towards normal cells. Anti-MCSP:TRAIL was designed to 1. selectively accrete at the cell surface of MCSP-positive melanoma cells and inhibit MCSP tumorigenic signaling and 2. activate apoptotic TRAIL-signaling. Results Treatment of a panel of MCSP-positive melanoma cell lines with anti-MCSP:TRAIL induced TRAIL-mediated apoptotic cell death within 16 h. Of note, treatment with anti-MCSP:sTRAIL was also characterized by a rapid dephosphorylation of key proteins, such as FAK, implicated in MCSP-mediated malignant behavior. Importantly, anti-MCSP:TRAIL treatment already inhibited anchorage-independent growth by 50% at low picomolar concentrations, whereas > 100 fold higher concentrations of non-targeted TRAIL failed to reduce colony formation. Daily i.v. treatment with a low dose of anti-MCSP:TRAIL (0.14 mg/kg resulted in a significant growth retardation of established A375 M xenografts. Anti-MCSP:TRAIL activity was further synergized by co-treatment with rimcazole, a σ-ligand currently in clinical trials for the treatment of various cancers. Conclusions Anti-MCSP:TRAIL has promising pre-clinical anti-melanoma activity that appears to result from combined inhibition of tumorigenic MCSP-signaling and concordant activation of TRAIL-apoptotic signaling. Anti-MCSP:TRAIL alone, or in combination with rimcazole, may be of potential value for the

  11. Microwave-Assisted Soluble Polymer-supported Synthesis of Peptoids

    Institute of Scientific and Technical Information of China (English)

    XU Guo-Yu; ZHANG Gang-Shen; YANG Gui-Chun; CHEN Zu-Xing

    2003-01-01

    @@ Libraries of peptide-like compounds are attractive sources of binding agents for proteomics applications. The synthesis of oligomeric combinatorial libraries of peptidomimetics is usually more straightforward than the creation of large libraries of more "drug-like" molecules. Herein we report synthesis of peptoids on soluble high loading Noncross-linked polystyrene. The synthesis route consists of: (a) preparation "soluble wang resin" from non-crosslinked polystyrene and 4-hydroxybenzyl alcohol via ether linkage, (b) an esterification step performed by the addition of bromoacetyl bromide to "soluble wang resin" and (c) a nucleophilic displacement of bromide with a primary amine.

  12. Soluble haemoglobin is a marker of recent Plasmodium falciparum infections

    DEFF Research Database (Denmark)

    Jakobsen, P H; Bygbjerg, I C; Theander, T G;

    1997-01-01

    . falciparum malaria compared to the levels during acute disease. Thus, both soluble Hb and haptoglobin appear to be markers of recent P. falciparum infections. Very high levels of CRP protein were measured in some of the malaria patients at the day of treatment while lower levels were recorded 7 and 30 days...... after treatment. Soluble Hb levels were associated with malariometric parameters in a similar fashion to haptoglobin. The new Mab-based assay for measuring soluble Hb in the peripheral blood of malaria patients may be useful for future epidemiological studies of malaria....

  13. Tariff discrimination on Brazil's soluble coffee: an economic analysis

    Directory of Open Access Journals (Sweden)

    Marislei Nishijima

    2010-06-01

    Full Text Available This article evaluates the impacts of the imposition of tariffs on the Brazilian soluble coffee mainly by European countries as of the 1990s. More particularly, it verifies whether the imposition of discriminatory trade tariffs by the European Union and of non-discriminatory ones by some Eastern European countries reflects on the international demand for this commodity. For this purpose, dynamic models of global demand for Brazilian soluble coffee were estimated for the 1995-2003 period using data from the International Coffee Organization. Findings suggest that existing tariffs significantly account for the reduction of Brazilian share of soluble in the world market.

  14. Infinitely many not locally soluble $SI^*$-groups

    CERN Document Server

    Mikaelian, Vahagn H

    2012-01-01

    The class of those (torsion-free) $SI^*$-groups which are not locally soluble, has the cardinality of the continuum. Moreover, these groups are not only pairwise non-isomorphic, but also they generate pairwise different varieties of groups. Thus, the set of varieties generated by not locally soluble $SI^*$-groups is of the same cardinality as the set of all varieties of groups. It is possible to localize a variety of groups which contains all groups and varieties constructed. The examples constructed here continue the well known example of a not locally soluble $SI^*$-group built by Hall and by Kov\\'acs and Neumann.

  15. tRNA concentration fine tunes protein solubility.

    Science.gov (United States)

    Fedyunin, Ivan; Lehnhardt, Lothar; Böhmer, Nadine; Kaufmann, Paul; Zhang, Gong; Ignatova, Zoya

    2012-09-21

    Clusters of codons pairing to low-abundance tRNAs synchronize the translation with co-translational folding of single domains in multidomain proteins. Although proven with some examples, the impact of the ribosomal speed on the folding and solubility on a global, cell-wide level remains elusive. Here we show that upregulation of three low-abundance tRNAs in Escherichia coli increased the aggregation propensity of several cellular proteins as a result of an accelerated elongation rate. Intriguingly, alterations in the concentration of the natural tRNA pool compromised the solubility of various chaperones consequently rendering the solubility of some chaperone-dependent proteins.

  16. Improved water solubility of neohesperidin dihydrochalcone in sweetener blends.

    Science.gov (United States)

    Benavente-García, O; Castillo, J; Del Baño, M J; Lorente, J

    2001-01-01

    Significant technological advantages in terms of sweetness synergy and hence cost-saving can be obtained if neohesperidin dihydrochalcone (NHDC) is used in sweetener blends with other intense or bulk sweeteners. The combination of NHDC with sodium saccharin or sodium cyclamate is an excellent method to improve the water solubility at room temperature of NHDC. In the case of NHDC-sodium saccharin, two different methods for blend preparation, a simple mixture and a cosolubilized mixture, can be used, with similar results obtained for solubility and solution stability properties. To improve temporally the water solubility of NHDC in combination with sodium cyclamate, it is absolutely necessary to prepare cosolubilized blends.

  17. Influence of polyvinylpyrrolidone quantity on the solubility, crystallinity and oral bioavailability of fenofibrate in solvent-evaporated microspheres.

    Science.gov (United States)

    Yousaf, Abid Mehmood; Kim, Dong Wuk; Kim, Dong Shik; Kim, Jong Oh; Youn, Yu Seok; Cho, Kwan Hyung; Yong, Chul Soon; Choi, Han-Gon

    2016-06-01

    The objective of this study is to explore the influence of polyvinylpyrrolidone (PVP) quantity on the solubility, crystallinity and oral bioavailability of poorly water-soluble fenofibrate in solvent-evaporated microspheres. Numerous microspheres were prepared with fenofibrate, sodium lauryl sulphate (SLS) and PVP using the spray-drying technique. Their aqueous solubility, dissolution, physicochemical properties and pharmacokinetics in rats were assessed. The drug in the solvent-evaporated microspheres composed of fenofibrate, PVP and SLS at the weight ratio of 1:0.5:0.25 was not entirely changed to the amorphous form and partially in the microcrystalline state. However, the microspheres at the weight ratio of 1:4:0.25 provided the entire conversion to the amorphous form. The latter microspheres, with an improvement of about 115 000-fold in aqueous solubility and 5.6-fold improvement in oral bioavailability compared with the drug powder, gave higher aqueous solubility and oral bioavailability compared with the former. Thus, PVP quantity played an important role in these properties of fenofibrate in the solvent-evaporated microspheres.

  18. Morphological Analysis and Solubility of Lead Particles: Effect of Phosphates and Implications to Drinking Water (Presentation)

    Science.gov (United States)

    Describe lead synthesis experiments conduced to model the impact of water quality on lead particles and solubility Develop a model system that can be used for lead solubility studies Understand how phosphates impact morphology and solubility transformations with time

  19. Deep cavitand receptors with pH-independent water solubility.

    Science.gov (United States)

    Lledó, Agustí; Rebek, Julius

    2010-12-07

    Pendant oligoethyleneglycol groups confer water solubility to a cavitand over a wide pH range. The kinetic stability of the host-guest complexes reveals an effective stabilization through hydrogen bonding even in the highly competitive aqueous environment.

  20. Internal pressure and solubility parameter as a function of pressure

    DEFF Research Database (Denmark)

    Verdier, Sylvain Charles Roland; Andersen, Simon Ivar

    2005-01-01

    The main goal of this work was to measure the solubility parameter of a complex mixture, such as a crude oil, especially as a function of pressure. Thus, its definition is explained, as well as the main approximations generally used in literature. Then, the internal pressure is investigated, since...... it is presented as an alternative of the solubility parameter. In this work, the assumption that internal pressure is a measure of the physical solubility parameter was made, i.e. representing the dispersion and polar forces. As for the pressure influence, it was seen that internal pressure reaches a maximum...... contrary to solubility parameter. An indirect method was chosen to estimate internal pressure, using thermal expansivities (determined by microcalorimetry) and isothermal compressibilities (determined by density measurements). The uncertainty is within 2% for the expansivity and 0.1% for the density. Five...

  1. Applications of laser in the field of chemical solubility determination

    Institute of Scientific and Technical Information of China (English)

    Mingming Chen(陈明鸣); Peisheng Ma(马沛生); Xinxing Liu(柳新星)

    2003-01-01

    A novel experiment method for chemical solubility determination was brought forward, in which opticsand chemistry principles are united and the change of laser intensity indicates the process of chemicaldissolving. The more undissolved solid exists in the mixture of solute and solvent, the less transmittedlaser intensity is detected. Only when the transmitted laser intensity in stirring state and that in staticstate comes into equalization, the dissolving process stops. Under the help of laser intensity judgement,measurements turn to be more feasible and objective, especially at high pressure. The average relativeerrors for the solubility data determined in this paper are 2.3% for those in the minor value scope and 1.7%for those in the high value scope respectively. Comparison of the experimental solubility data with theliterature ones demonstrates that the laser-aid solubility determination apparatus is stable and reliable.

  2. Water-soluble pyrrolopyrrole cyanine (PPCy) NIR fluorophores.

    Science.gov (United States)

    Wiktorowski, Simon; Rosazza, Christelle; Winterhalder, Martin J; Daltrozzo, Ewald; Zumbusch, Andreas

    2014-05-11

    Water-soluble derivatives of pyrrolopyrrole cyanines (PPCys) have been synthesized by a post-synthetic modification route. In highly polar media, these dyes are excellent NIR fluorophores. Labeling experiments show how these novel dyes are internalized into mammalian cells.

  3. Nanosuspension: An approach to enhance solubility of drugs

    Directory of Open Access Journals (Sweden)

    Vishal R Patel

    2011-01-01

    Full Text Available One of the major problems associated with poorly soluble drugs is very low bioavailability. The problem is even more complex for drugs like itraconazole, simvastatin, and carbamazepine which are poorly soluble in both aqueous and nonaqueous media, belonging to BCS class II as classified by biopharmaceutical classification system. Formulation as nanosuspension is an attractive and promising alternative to solve these problems. Nanosuspension consists of the pure poorly water-soluble drug without any matrix material suspended in dispersion. Preparation of nanosuspension is simple and applicable to all drugs which are water insoluble. A nanosuspension not only solves the problems of poor solubility and bioavailability, but also alters the pharmacokinetics of drug and thus improves drug safety and efficacy. This review article describes the preparation methods, characterization, and applications of the nanosuspension.

  4. Nanosuspension: An approach to enhance solubility of drugs.

    Science.gov (United States)

    Patel, Vishal R; Agrawal, Y K

    2011-04-01

    One of the major problems associated with poorly soluble drugs is very low bioavailability. The problem is even more complex for drugs like itraconazole, simvastatin, and carbamazepine which are poorly soluble in both aqueous and nonaqueous media, belonging to BCS class II as classified by biopharmaceutical classification system. Formulation as nanosuspension is an attractive and promising alternative to solve these problems. Nanosuspension consists of the pure poorly water-soluble drug without any matrix material suspended in dispersion. Preparation of nanosuspension is simple and applicable to all drugs which are water insoluble. A nanosuspension not only solves the problems of poor solubility and bioavailability, but also alters the pharmacokinetics of drug and thus improves drug safety and efficacy. This review article describes the preparation methods, characterization, and applications of the nanosuspension.

  5. Improving tenoxicam solubility and bioavailability by cosolvent system.

    Science.gov (United States)

    Yeh, Ming-Kung; Chang, Li-Chien; Chiou, Andy Hong-Jey

    2009-01-01

    The formulation study of tenoxicam, a poorly water-soluble drug, was developed by use of a ternary cosolvent system and has significantly enhanced the solubility. Additionally, the relative bioavailability of testing formulation was also evaluated by New Zealand rabbit with a single i.m. injection. The three-phase diagram for dimethylsulfoxide (DMSO)/propylene glycol/water, DMSO/ethanol/water, and DMSO/polyethoxylated castor oil/ethanol system was developed. The volume ratio of 5:4:1 in the DMSO/polyethoxylated castor oil/ethanol system resulted in a more suitable vehicle than other systems, with a high solubility (20.73 mg/ml) and low viscosity (10.0 Cp). A pharmacokinetic study of bioequivalence (F (rel) = 0.89) was also obtained. The present study not only provides a novel strategy improving tenoxicam solubility but also helps further scientific knowledge for the development of parenteral formulations.

  6. Which Starch Fraction is Water-Soluble, Amylose or Amylopectin?

    Science.gov (United States)

    Green, Mark M.; And Others

    1975-01-01

    A survey of 22 popular organic chemistry textbooks showed that only four correctly stated that of the two components of starch, amylopectin is the water-soluble, and amylose is the water-insoluble. (MLH)

  7. Liquid antisolvent precipitation process for solubility modulation of bicalutamide.

    Science.gov (United States)

    Meer, Tarique Ali; Sawant, Kiran P; Amin, Purnima D

    2011-12-01

    Liquid antisolvent process was explored as a solubility modulating tool. Bicalutamide, a poorly water soluble drug, was used as a candidate. Low aqueous solubility and poor dissolution of bicalutamide results into poor and variable bioavailability. Therefore, the objective of the present work was to modify the solubility of bicalutamide using the liquid antisolvent precipitation process. HPMC E5 and Poloxamer 407 were shortlisted as a hydrophilic polymer and surfactant, respectively, for the process. Process optimization was done with respect to the hydrophilic polymer, surfactant and drug loading concentration. The resultant microcrystals were characterized with various instrumental techniques for material characterization such as IR, DSC, SEM, XRD, particle size, specific surface area and dissolution kinetics.

  8. Solubility of actinides and surrogates in nuclear glasses; Solubilite des actinides et de leurs simulants dans les verres nucleaires. Limites d'incorporation et comprehension des mecanismes

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, Ch

    2003-07-01

    The nuclear wastes are currently incorporated in borosilicate glass matrices. The resulting glass must be perfectly homogeneous. The work discussed here is a study of actinide (thorium and plutonium) solubility in borosilicate glass, undertaken to assess the extent of actinide solubility in the glass and to understand the mechanisms controlling actinide solubilization. Glass specimens containing; actinide surrogates were used to prepare and optimize the fabrication of radioactive glass samples. These preliminary studies revealed that actinide Surrogates solubility in the glass was enhanced by controlling the processing temperature, the dissolution kinetic of the surrogate precursors, the glass composition and the oxidizing versus reducing conditions. The actinide solubility was investigated in the borosilicate glass. The evolution of thorium solubility in borosilicate glass was determined for temperatures ranging from 1200 deg C to 1400 deg C.Borosilicate glass specimens containing plutonium were fabricated. The experimental result showed that the plutonium solubility limit ranged from 1 to 2.5 wt% PuO{sub 2} at 1200 deg C. A structural approach based on the determination of the local structure around actinides and their surrogates by EXAFS spectroscopy was used to determine their structural role in the glass and the nature of their bonding with the vitreous network. This approach revealed a correlation between the length of these bonds and the solubility of the actinides and their surrogates. (author)

  9. Substituted Polyfluorene-Based Hole Transport Layer with Tunable Solubility

    OpenAIRE

    Craciun, N. I.; Wildeman, J.; Blom, P. W. M.

    2010-01-01

    We report on the synthesis and electrical characterization of polyfluorene-triarylamine-based hole transport layers (HTLs). The solubility of the HTL can be tuned by adjustment of the chemical structure without loss of the charge transport properties. Double-layer polymer light-emitting diodes are constructed with an HTL that is not soluble in toluene at room temperature, combined with a poly(p-phenylene vinylene) (PPV)-derivative-based light-emitting layer. The addition of the HTL enhances t...

  10. Fluorinated Silsesquioxanes: Structure, Solubility, and Wetting (Briefing charts)

    Science.gov (United States)

    2015-08-01

    values based on Hansen Solubiliy Parameters (for “liquid” surfaces) γlv (dyn / cm) γdlv (dyn / cm) Fluorodecyl T8 (est. HSP) 34.6 24.8 Fluorohexyl T8 (est...Charts 3. DATES COVERED (From - To) July 2015-July 2015 4. TITLE AND SUBTITLE FLUORINATED SILSESQUIOXANES: STRUCTURE, SOLUBILITY , AND WETTING...FLUORINATED SILSESQUIOXANES: STRUCTURE, SOLUBILITY , AND WETTING Joseph Mabry, Andrew Guenthner, Scott Iacono, Raymond Campos, Sean Ramirez, Brian Moore

  11. THE SOLUBILITY OF MILAS BAUXITE ORE IN SULPHURIC ACI

    Directory of Open Access Journals (Sweden)

    Mustafa GULFEN

    2001-06-01

    Full Text Available The effects of calcination conditions,sulphuric acid concentrations and dissolvingtemperature and period as parameters to thesolubility of the bauxite ore from Gobekdagı reservesin Mugla-Milas region were investigated. The bauxitesamples were calcined in different periods at differenttemperatures. Then the solubility of the calcinedbauxite samples in sulphuric acid solution wasexamined. Dissolving activation energy (Ea wascalculated using the optimum kinetics equation andthe results obtained from the solubility studiesexamined dissolving temperatures and periods

  12. Hydrogen solubility in rare earth based hydrogen storage alloys

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, Hirohisa [Tokai Univ., Kanagawa (Japan). School of Engineering; Kuji, Toshiro [Mitsui Mining and Smelting Co. Ltd., Saitama (Japan)

    1999-09-01

    This paper reviews significant results of recent studies on the hydrogen storage properties of rare earth based AB{sub 5} (A: rare earth element, B: transition element) alloys The hydrogen solubility and the hydride formation, typically appeared in pressure-composition isotherms (PCT), are strongly dependent upon alloy composition, structure, morphology and even alloy particle size. Typical experimental results are shown to describe how these factors affect the hydrogen solubility and storage properties.

  13. Soluble mediators and the interaction of drugs in IBD

    DEFF Research Database (Denmark)

    Rask-Madsen, J

    1998-01-01

    , which provides the clinical manifestations of IBD. Other important soluble mediators of inflammation include complement-derived and chemotactic peptides, specific adhesion molecules, neuropeptides and reactive metabolites of oxygen and nitrogen. Current established therapies, such as glucocorticoids...... and 5-aminosalicylic acid (5-ASA), inhibit raised concentrations of these interdependent soluble mediators of inflammation, which may amplify one another or have parallel effects. Future medical options for treatment of IBD aim at removing perpetuating antigens or inhibiting the entry of inflammatory...

  14. Soluble and stable zethrenebis(dicarboximide) and its quinone

    KAUST Repository

    Sun, Zhe

    2010-10-15

    Soluble and stable zethrenebis(dicarboximide) (1) was synthesized by an in situ Stille cross coupling/transannular cyclization reaction. 1 showed largely improved photostability and solubility compared with the very unstable zethrene and it also exhibited far-red absorption and emission with high photoluminescence quantum yield. Bromination of 1 with NBS/DMF gave its quinone form 2 via an unusual pathway. © 2010 American Chemical Society.

  15. Zinc solubility and fractionation in cultivated calcareous soils irrigated with wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Nazif, W. [Division of Agricultural and Environmental Sciences, School of Biosciences, University of Nottingham, Sutton Bonington, Leicestershire LE12 5RD (United Kingdom); Marzouk, E.R. [Division of Soil and Water Sciences, Faculty of Environmental Agricultural Sciences, Suez Canal University, North Sinai 45516 (Egypt); Perveen, S. [Department of Soil and Environmental Sciences, Khyber Pakhtunkhwa Agricultural University, Peshawar (Pakistan); Crout, N.M.J. [Division of Agricultural and Environmental Sciences, School of Biosciences, University of Nottingham, Sutton Bonington, Leicestershire LE12 5RD (United Kingdom); Young, S.D., E-mail: scott.young@nottingham.ac.uk [Division of Agricultural and Environmental Sciences, School of Biosciences, University of Nottingham, Sutton Bonington, Leicestershire LE12 5RD (United Kingdom)

    2015-06-15

    The solubility, lability and fractionation of zinc in a range of calcareous soils from Peshawar, Pakistan were studied (18 topsoils and 18 subsoils). The lability (E-value) of Zn was assessed as the fraction isotopically exchangeable with {sup 70}Zn{sup 2+}; comparative extractions included 0.005 M DTPA, 0.43 M HNO{sub 3} and a Tessier-style sequential extraction procedure (SEP). Because of the extremely low concentration of labile Zn the E-value was determined in soils suspended in 0.0001 M Na{sub 2}-EDTA which provided reliable analytical conditions in which approximately 20% of the labile Zn was dissolved. On average, only 2.4% of soil Zn was isotopically exchangeable. This corresponded closely to Zn solubilised by extraction with 0.005 DTPA and by the carbonate extraction step (F1 + F2) of the Tessier-style SEP. Crucially, although the majority of the soil CaCO{sub 3} was dissolved in F2 of the SEP, the DTPA dissolved only a very small proportion of the soil CaCO{sub 3}. This suggests a superficial carbonate-bound form of labile Zn, accessible to extraction with DTPA and to isotopic exchange. Zinc solubility from soil suspended in 0.01 M Ca(NO{sub 3}){sub 2} (PCO{sub 2} controlled at 0.03) was measured over three days. Following solution speciation using WHAM(VII) two simple solubility models were parameterised: a pH dependent ‘adsorption’ model based on the labile (isotopically exchangeable) Zn distribution coefficient (Kd) and an apparent solubility product (Ks) for ZnCO{sub 3}. The distribution coefficient showed no pH-dependence and the solubility model provided the best fit to the free ion activity (Zn{sup 2+}) data, although the apparent value of log{sub 10} Ks (5.1) was 2.8 log units lower than that of the mineral smithsonite (ZnCO{sub 3}). - Highlights: • Isotopically exchangeable Zn in the calcareous soils of Peshawar is extremely low. • There is no evidence of topsoil enrichment from the use of wastewater for irrigation. • Solubility

  16. Phytotoxicity of soluble graphitic nanofibers to model plant species.

    Science.gov (United States)

    Gorka, Danielle E; Jeger, Jonathan Litvak; Zhang, Hongbo; Ma, Yanwen; Colman, Benjamin P; Bernhardt, Emily S; Liu, Jie

    2016-12-01

    Carbon nanomaterials are considered promising for applications in energy storage, catalysis, and electronics. This has motivated study of their potential environmental toxicity. Recently, a novel nanomaterial consisting of graphene oxide wrapped around a carbon nanotube (CNT) core was synthesized. The resulting soluble graphitic nanofibers were found to have superior catalytic properties, which could result in their use in fuel cells. Before this material undergoes widespread use, its environmental toxicity must be determined because of its aqueous solubility. The authors used the plant species Lolium multiflorum, Solanum lycopersicum, and Lactuca sativa to study the toxicity of the soluble graphitic nanofibers, as well as multiwalled carbon nanotubes (MWCNTs) and graphene oxide, all synthesized in-house. Soluble graphitic nanofiber-exposed plant roots and shoots showed decreased growth, with roots showing more toxicity than shoots. Decreased pH of nanomaterial solutions corresponded to insignificantly decreased root growth, suggesting that another mechanism of toxicity must exist. Agglomeration and adsorption of soluble graphitic nanofibers onto the roots likely caused the remaining toxicity because a gray layer could be seen around the surface of the root. Multiwalled carbon nanotubes showed little toxicity over the concentration range tested, whereas graphene oxide showed a unique pattern of high toxicity at both the lowest and highest concentrations tested. Overall, soluble graphitic nanofibers showed moderate toxicity between that of the more toxic graphene oxide and the relatively nontoxic MWCNTs. Environ Toxicol Chem 2016;35:2941-2947. © 2016 SETAC.

  17. Determination of solubility parameters for poly(3-hydroxyalkanoates).

    Science.gov (United States)

    Terada, M; Marchessault, R H

    1999-01-01

    The three dimensional solubility parameters defined by Hansen are based on dispersion forces between structural units, interaction between polar groups and hydrogen bonding. For polar polymers such as poly(3-hydroxyalkanoates), P(3HA), this approach was used to obtain the three coordinates of a solubility parameter in terms of: a dispersion part, a polar part and a hydrogen bonding part. Thirty-eight different solvents for poly(3-hydroxybutyrate), PHB, which are mentioned in the literature are examined by this method and the theoretical predictions are compared with the experimental reports. Another overall comparison between PHA polymers provides their Hansen and Hildebrand parameters for side chain lengths up to C13. In this series a linear progression in calculated solubility parameters with side chain length was found. An Appendix provides information and data on calculation of the solubility parameters. While the solubility information is limited and only covers homopolymers, it should help to highlight some of the contradictions regarding PHB solubility. This semi-empirical approach is only valid for amorphous polymers hence crystallinity effects, which are important with PHB, as well as molecular weight effects still require analysis.

  18. Solubility Advantage (and Disadvantage) of Pharmaceutical Amorphous Solid Dispersions.

    Science.gov (United States)

    Huang, Siyuan; Mao, Chen; Williams, Robert O; Yang, Chia-Yi

    2016-12-01

    The solubility of a drug is ultimately governed by its chemical potential as it is present in the undissolved solute. For a pharmaceutical amorphous solid dispersion (ASD), its solubility depends on the state and composition of the undissolved solute when the ASD is equilibrated with water. Concerning the undissolved solute phase that can contain up to 3 components (drug, polymer, and water), we developed a complete thermodynamic model to calculate the chemical potential of a drug in the multicomponent, amorphous system. This approach enables the estimation of the true solubility advantage of ASD from calorimetric measurements and moisture sorption isotherms. Both theoretical estimation and experimental studies, using indomethacin (IMC)/Eudragit E ASD systems, show that the solubility advantage of the amorphous IMC is significantly reduced through ASD formation and water partitioning. For the ASD with 70% drug loading, the solubility of IMC is lower than its crystalline counterpart. Our results show that stabilization through the ASD formation and water sorption can be manifested by the lowering of drug solubility; they demonstrate that the core property in ASD development is the drug chemical potential, which is essentially the thermodynamic driving force and can be quantitated using the model presented in this work.

  19. Formulation and Evaluation of Hydrotropic Solublization Based Suspensions of Griseofulvin

    Directory of Open Access Journals (Sweden)

    A. S. Shete,

    2010-02-01

    Full Text Available Purpose: Hydrotropes increases the solubility of organics in water. Objective of present investigation was to enhance the solubility of griseofulvin using the technique of hydrotropic solubilization technique and convert them into suitable oral liquid dosage form (suspension useful for enhancement of bioavailability. Methods: 0.5M, 1M, 2M of the hydrotropes (tri sodium citrate, urea, sodium acetate, sodium benzoate and sodium salicylates were used to study the saturation solubility. Solubility was found to be greater with sodium benzoate. Suspensions were prepared by using sodium benzoate solution, greseofulvin, xanthan gum, acacia, sodium alginate as a aqueous phase, dispersed phase and suspending agents respectively. Prepared suspensions were characterized for appearance of phases, density, particle size of dispersed Phase, pourability, sedimentationvolume and invitro drug release. Results: All formulations of sodium benzoate suspension were uniformly distributed, density in the range of 1.020 to 1.050gm/ml, particle size of the dispersed phase was 10μm to 20μm, suspensions were easily pourable from the bottle and sedimentation volume in the rage of 0.5-1. More than 70% drug release was obtained at the end of the 45 minutes. Conclusions: Hydrotropic solublization technique for preparation of suspensions of poor water soluble drugs will gave stability to the formulation and helps in enhancement of bioavailability of greseofulvin.

  20. Phytosterol ester constituents affect micellar cholesterol solubility in model bile.

    Science.gov (United States)

    Brown, Andrew W; Hang, Jiliang; Dussault, Patrick H; Carr, Timothy P

    2010-09-01

    Plant sterols and stanols (phytosterols) and their esters are nutraceuticals that lower LDL cholesterol, but the mechanisms of action are not fully understood. We hypothesized that intact esters and simulated hydrolysis products of esters (phytosterols and fatty acids in equal ratios) would differentially affect the solubility of cholesterol in model bile mixed micelles in vitro. Sodium salts of glycine- and taurine-conjugated bile acids were sonicated with phosphatidylcholine and either sterol esters or combinations of sterols and fatty acids to determine the amount of cholesterol solubilized into micelles. Intact sterol esters did not solubilize into micelles, nor did they alter cholesterol solubility. However, free sterols and fatty acids altered cholesterol solubility independently (no interaction effect). Equal contents of cholesterol and either campesterol, stigmasterol, sitosterol, or stigmastanol (sitostanol) decreased cholesterol solubility in micelles by approximately 50% compared to no phytosterol present, with stigmasterol performing slightly better than sitosterol. Phytosterols competed with cholesterol in a dose-dependent manner, demonstrating a 1:1 M substitution of phytosterol for cholesterol in micelle preparations. Unsaturated fatty acids increased the micelle solubility of sterols as compared with saturated or no fatty acids. No differences were detected in the size of the model micelles. Together, these data indicate that stigmasterol combined with saturated fatty acids may be more effective at lowering cholesterol micelle solubility in vivo.

  1. Study of pH-dependent drugs solubility in water

    Directory of Open Access Journals (Sweden)

    Pobudkowska A.

    2014-01-01

    Full Text Available The solubilities of five sparingly soluble drug-compounds in water have been measured at constant temperatures (298.1K and 310.1K by the classical saturation shake-flask method. All substances presented in this work are derivatives of anthranilic acid: flufenamic acid, (FLU, mefenamic acid, (MEF, niflumic acid, (NIF, diclofenac sodium, (DIC, and meclofenamic sodium, (MEC. All of them have anti-inflammatory action. Since the aqueous solubility of the ionized drug is significantly higher than the unionized, the experimental conditions that affect equilibrium solubility values such as composition of aqueous buffer have been examined. The Henderson-Hasselbalch (HH relationship has been used to predict the pH-dependent solubility profiles of chosen drugs at two temperatures. For this purpose the pKa values of the investigated drugs have been determined with Bates-Schwarzenbach spectrophotometric method at temperature 310.1 K. At temperature 298.1K these values were reported earlier. Similar values of pKa were obtained from the solubility measurements.

  2. Life Cycle Assessment and Risk Assessment

    DEFF Research Database (Denmark)

    Olsen, Stig Irving

    Life Cycle Assessment (LCA) is a tool for environmental assessment of product and systems – over the whole life cycle from acquisition of raw materials to the end-of-life of the product – and encompassing all environmental impacts of emissions and resource usage, e.g. global warming, acidification...... and toxicity. Whereas Risk Assessment (RA) aims to identify absolute risks, LCA assess potential or relative impacts. LCA is readily applicable to nanotechnologies and several studies have been carried out, but LCA faces large problems when addressing toxic impacts of nanomaterials emitted during the life...... cycle. The models for assessing toxic impacts in LCA are to a large extent based on those developed for RA, e.g. EUSES, and require basic information about the inherent properties of the emissions like solubility, LogKow,ED50 etc. Additionally, it is a prerequisite to know how to characterize...

  3. Colloid-Facilitated Transport of Low-Solubility Radionuclides: A Field, Experimental, and Modeling Investigation

    Energy Technology Data Exchange (ETDEWEB)

    Kersting, A B; Reimus, P W; Abdel-Fattah, A; Allen, P G; Anghel, I; Benedict, F C; Esser, B K; Lu, N; Kung, K S; Nelson, J; Neu, M P; Reilly, S D; Smith, D K; Sylwester, E R; Wang, L; Ware, S D; Warren, RG; Williams, R W; Zavarin, M; Zhao, P

    2003-02-01

    rate of Pu transport. Currently, the role of colloids in facilitating the transport of low-solubility radionuclides is not understood well enough to effectively model contaminant transport. A fundamental understanding of the role that colloids may or may not play in the transport of low-solubility radionuclides is needed in order to predict contaminant transport, design remediation strategies and provide risk assessments. Ryan and Elimelech (1996) have argued that in order to evaluate the potential for colloids to transport radionuclides, several criteria must be met: (1) colloids must exist and be stable, (2) radionuclides must have a high sorption affinity for the colloids, and (3) colloids must be transported. Only then can we understand the conditions where colloids can and will facilitate transport of radionuclides. In this report we compile the results from a series of field, laboratory and modeling studies funded by the UGTA program in order to evaluate the potential for colloids to transport low-solubility radionuclides at the NTS. The studies presented in this report fall under three general areas of investigation: Characterization of natural colloids in groundwater at NTS, Pu sorption/desorption experiments on colloid minerals identified in NTS groundwater, and Transport of Pu-doped colloids through fractured rock core. Chapter 1 is a background review of our current understanding of colloids and their role in facilitating contaminant transport. Chapters 2, and 3 are field studies that focused on characterizing natural colloids at different hydrologic environments at the NTS and address Ryan and Elimelech's (1996) first criteria regarding the existence and stability of colloids. Chapters 4, 5 and 6 are laboratory experimental studies that investigate the sorption/desorption behavior of Pu and other low-solubility radionuclides on colloid minerals observed in NTS groundwater. These studies evaluate Ryan and Elimelech's (1996) second criteria that the

  4. Soluble plantain fibre blocks adhesion and M-cell translocation of intestinal pathogens.

    Science.gov (United States)

    Roberts, Carol L; Keita, Asa V; Parsons, Bryony N; Prorok-Hamon, Maelle; Knight, Paul; Winstanley, Craig; O' Kennedy, Niamh; Söderholm, Johan D; Rhodes, Jonathan M; Campbell, Barry J

    2013-01-01

    Dietary fibres may have prebiotic effects mediated by promotion of beneficial bacteria. This study explores the possibility that soluble plant fibre may also improve health by inhibiting epithelial adhesion and translocation by pathogenic bacteria. We have focussed on soluble non-starch polysaccharide (NSP) from plantain bananas (Musa spp.) which previous studies showed to be particularly effective at blocking Escherichia coli epithelial adherence. In vitro and ex vivo studies assessed the ability of plantain NSP to inhibit epithelial cell adhesion and invasion of various bacterial pathogens, and to inhibit their translocation through microfold (M)-cells and human Peyer's patches mounted in Ussing chambers. Plantain NSP showed dose-related inhibition of epithelial adhesion and M-cell translocation by a range of pathogens. At 5mg/ml, a concentration readily achievable in the gut lumen, plantain NSP inhibited adhesion to Caco2 cells by Salmonella Typhimurium (85.0 ± 8.2%, PPlantain NSP also inhibited invasion of Caco2 cells by S. Typhimurium (80.2 ± 9.7%) and Sh. sonnei (46.7 ± 13.4%); PPlantain NSP, 5mg/ml, also inhibited translocation of S. Typhimurium and Sh. sonnei across M-cells by 73.3 ± 5.2% and 46.4 ± 7.7% respectively (Pplantain NSP (Pplantain fibre can block epithelial adhesion and M-cell translocation of intestinal pathogens. This represents an important novel mechanism by which soluble dietary fibres can promote intestinal health and prevent infective diarrhoea.

  5. Optimizing conditions for production of high levels of soluble recombinant human growth hormone using Taguchi method.

    Science.gov (United States)

    Savari, Marzieh; Zarkesh Esfahani, Sayyed Hamid; Edalati, Masoud; Biria, Davoud

    2015-10-01

    Human growth hormone (hGH) is synthesized and stored by somatotroph cells of the anterior pituitary gland and can effect on body metabolism. This protein can be used to treat hGH deficiency, Prader-Willi syndrome and Turner syndrome. The limitations in current technology for soluble recombinant protein production, such as inclusion body formation, decrease its usage for therapeutic purposes. To achieve high levels of soluble form of recombinant human growth hormone (rhGH) we used suitable host strain, appropriate induction temperature, induction time and culture media composition. For this purpose, 32 experiments were designed using Taguchi method and the levels of produced proteins in all 32 experiments were evaluated primarily by ELISA and dot blotting and finally the purified rhGH protein products assessed by SDS-PAGE and Western blotting techniques. Our results indicate that media, bacterial strains, temperature and induction time have significant effects on the production of rhGH. The low cultivation temperature of 25°C, TB media (with 3% ethanol and 0.6M glycerol), Origami strain and a 10-h induction time increased the solubility of human growth hormone.

  6. Acid-base properties and solubility of pindolol, diazepam and chlordiazepoxide in SDS micelles.

    Science.gov (United States)

    de Castro, B; Domingues, V; Gameiro, P; Lima, J L; Oliveira, A; Reis, S

    1999-09-30

    The effect of sodium dodecyl sulphate (SDS) on the acid-base properties and on the solubility of a beta-blocker (pindolol) and of two benzodiazepines (diazepam and chlordiazepoxide) has been assessed. The study was performed by potentiometric and spectrophotometric determinations of the acidity constants and by spectrophotometric evaluation of the solubilities of the pharmaceutical drugs in aqueous solution and in solutions to which was added SDS with concentrations below and above the critical micelle concentration (cmc), at 25 degrees C and at an ionic strength 0.1 M (NaCl). The effect of the organized assemblies on the pKa values was quantified by the application of two theoretical models that differ in the inclusion of ionic exchange between positively charged species in solution. These models have allowed the determination of the binding constants for drug/micelle and yielded values in good agreement with those obtained by the solubility method, and in addition provide a more detailed picture of the effect of drug charge on its partition. The results can be taken to evidence different interaction modes of the drugs with the SDS micelles.

  7. Role of VAM on growth and phosphorus nutrition of maize with low soluble phosphate fertilization

    Directory of Open Access Journals (Sweden)

    Amitava Rakshit

    2010-01-01

    Full Text Available The effect of vesicular arbuscular mycorrhizal (VAM infection on growth and P nutrition in Maize (Zea mays, cv.DDH hybrid were assessed in Oxisol pot experiment. Maize was grown inoculated with spores of VAM fungi Glomus mosseae or non-inoculated. Low soluble ferrous phosphate (FePO4.4H2O was added to the mycorrhized and non-micrrohized maized. The dry weight of mycorrhized plants with added phosphate (P were higher than in mycorrhized plants without added P or non-mycorrhized plants with added P. The amount of P in the soil samples from pots with mycorrhizal plants fertilized with P was evidently smaller than those in samples also fertilized non-mycorrhizal plants. The percentage of P was higher in tissues of fertilized mycorrhial plants than in those mycorrihzed plants without or nonmycorrhized plants with added low-soluble P. These results indicated that plants in VAM symbiosis mobilize P better from low-soluble P than non-mycorrhized plants.

  8. Determination of water-soluble forms of oxalic and formic acids in soils by ion chromatography

    Science.gov (United States)

    Karicheva, E.; Guseva, N.; Kambalina, M.

    2016-03-01

    Carboxylic acids (CA) play an important role in the chemical composition origin of soils and migration of elements. The content of these acids and their salts is one of the important characteristics for agrochemical, ecological, ameliorative and hygienic assessment of soils. The aim of the article is to determine water-soluble forms of same carboxylic acids — (oxalic and formic acids) in soils by ion chromatography with gradient elution. For the separation and determination of water-soluble carboxylic acids we used reagent-free gradient elution ion-exchange chromatography ICS-2000 (Dionex, USA), the model solutions of oxalate and formate ions, and leachates from soils of the Kola Peninsula. The optimal gradient program was established for separation and detection of oxalate and formate ions in water solutions by ion chromatography. A stability indicating method was developed for the simultaneous determination of water-soluble organic acids in soils. The method has shown high detection limits such as 0.03 mg/L for oxalate ion and 0.02 mg/L for formate ion. High signal reproducibility was achieved in wide range of intensities which correspond to the following ion concentrations: from 0.04 mg/g to 10 mg/L (formate), from 0.1 mg/g to 25 mg/L (oxalate). The concentration of formate and oxalate ions in soil samples is from 0.04 to 0.9 mg/L and 0.45 to 17 mg/L respectively.

  9. Role of VAM on growth and phosphorus nutrition of maize with low soluble phosphate fertilization

    Directory of Open Access Journals (Sweden)

    Rakshit Amitava

    2010-03-01

    Full Text Available The effect of vesicular arbuscular mycorrhizal (VAM infection on growth and P nutrition in Maize (Zea mays, cv.DDH hybrid were assessed in Oxisol pot experiment. Maize was grown inoculated with spores of VAM fungi Glomus mosseae or non-inoculated. Low soluble ferrous phosphate (FePO4.4H2O was added to the mycorrhized and non-micrrohized maized. The dry weight of mycorrhized plants with added phosphate (P were higher than in mycorrhized plants without added P or non-mycorrhized plants with added P. The amount of P in the soil samples from pots with mycorrhizal plants fertilized with P was evidently smaller than those in samples also fertilized non-mycorrhizal plants. The percentage of P was higher in tissues of fertilized mycorrhial plants than in those mycorrihzed plants without or nonmycorrhized plants with added low-soluble P. These results indicated that plants in VAM symbiosis mobilize P better from low-soluble P than non-mycorrhized plants.

  10. Rapid dissolution of soluble uranyl phases in arid, mine-impacted catchments near Church Rock, NM.

    Science.gov (United States)

    deLemos, Jamie L; Bostick, Benjamin C; Quicksall, Andrew N; Landis, Joshua D; George, Christine C; Slagowski, Naomi L; Rock, Tommy; Brugge, Doug; Lewis, Johnnye; Durant, John L

    2008-06-01

    We tested the hypothesis that runoff of uranium-bearing particles from mining waste disposal areas was a significant mechanism for redistribution of uranium in the northeastern part of the Upper Puerco River watershed (New Mexico). However, our results were not consistent with this hypothesis. Analysis of > 100 sediment and suspended sediment samples collected adjacent to and downstream from uranium source areas indicated that uranium levels in the majority of the samples were not elevated above background. Samples collected within 50 m of a known waste disposal site were subjected to detailed geochemical characterization. Uranium in these samples was found to be highly soluble; treatment with synthetic pore water for 24 h caused dissolution of 10--50% of total uranium in the samples. Equilibrium uranium concentrations in pore water were > 4.0 mg/L and were sustained in repeated wetting events, effectively depleting soluble uranium from the solid phase. The dissolution rate of uranium appeared to be controlled by solid-phase diffusion of uranium from within uranium-bearing mineral particles. X-ray adsorption spectroscopy indicated the presence of a soluble uranyl silicate, and possibly a uranyl phosphate. These phases were exhausted in transported sediment suggesting that uranium was readily mobilized from sediments in the Upper Puerco watershed and transported in the dissolved load. These results could have significance for uranium risk assessment as well as mining waste management and cleanup efforts.

  11. Characterization of soluble dietary fiber from Moringa oleifera seeds and its immunomodulatory effects.

    Science.gov (United States)

    Anudeep, Sandanamudi; Prasanna, Vaddi K; Adya, Shruthi M; Radha, Cheruppanpullil

    2016-10-01

    Moringa oleifera (moringa or drumstick) seeds are a potential source of dietary fiber with 6.5% w/w soluble dietary fiber. Biochemical characterization of moringa seed soluble fiber revealed that it is a glycoprotein with 5% neutral sugars. Arabinose and xylose are the major neutral sugars identified by gas liquid chromatography (GLC). Moringa seed soluble fiber was identified as protease resistant-glycoprotein and termed as moringa seed resistant protein (MSRP). MSRP was found to be a homodimer (18kDa) containing two 9kDa monomeric units as revealed by SDS-PAGE analysis with pI 10.8. Immunostimulating activity of MSRP was assessed by murine splenocyte proliferation and production of NO from macrophages. MSRP at low concentration (0.01μg/well) strongly increased proliferation of splenocytes, while MSRP at high concentration weakly responded. MSRP induced 6-fold increase in NO production when compared to the control which indicates the activation of macrophages. MSRP isolated from defatted moringa seed flour is a potent mitogen, enhancing the proliferation of lymphocytes and inducing NO from macrophages. This study concludes that moringa seed is a potential nutritional source to promote the immune system of the host.

  12. Determination of Uncertainties for +III and +IV Actinide Solubilities in the WIPP Geochemistry Model for the 2009 Compliance Recertification Application

    Science.gov (United States)

    Ismail, A. E.; Xiong, Y.; Nowak, E. J.; Brush, L. H.

    2009-12-01

    The Waste Isolation Pilot Plant (WIPP) is a U.S. Department of Energy (DOE) repository in southeast New Mexico for defense-related transuranic (TRU) waste. Every five years, the DOE is required to submit an application to the Environmental Protection Agency (EPA) demonstrating the WIPP’s continuing compliance with the applicable EPA regulations governing the repository. Part of this recertification effort involves a performance assessment—a probabilistic evaluation of the repository performance with respect to regulatory limits on the amount of releases from the repository to the accessible environment. One of the models used as part of the performance assessment process is a geochemistry model, which predicts solubilities of the radionuclides in the brines that may enter the repository in the different scenarios considered by the performance assessment. The dissolved actinide source term comprises actinide solubilities, which are input parameters for modeling the transport of radionuclides as a result of brine flow through and from the repository. During a performance assessment, the solubilities are modeled as the product of a “base” solubility determined from calculations based on the chemical conditions expected in the repository, and an uncertainty factor that describes the potential deviations of the model from expected behavior. We will focus here on a discussion of the uncertainties. To compute a cumulative distribution function (CDF) for the uncertainties, we compare published, experimentally measured solubility data to predictions made using the established WIPP geochemistry model. The differences between the solubilities observed for a given experiment and the calculated solubilities from the model are used to form the overall CDF, which is then sampled as part of the performance assessment. We will discuss the methodology used to update the CDF’s for the +III actinides, obtained from data for Nd, Am, and Cm, and the +IV actinides, obtained

  13. Cyclodextrins and ternary complexes: technology to improve solubility of poorly soluble drugs

    Directory of Open Access Journals (Sweden)

    Janisse Crestani de Miranda

    2011-12-01

    Full Text Available Cyclodextrins (CDs are cyclic oligosaccharides composed of D-glucopyranoside units linked by glycosidic bonds. Their main property is the ability to modify the physicochemical and biological characteristics of low-soluble drugs through the formation of drug:CD inclusion complexes. Inclusion complexation requires that host molecules fit completely or partially within the CD cavity. This adjustment is directly related to the physicochemical properties of the guest and host molecules, easy accommodation of guest molecules within the CD cavity, stoichiometry, therapeutic dose, and toxicity. However, dosage forms may achieve a high volume, depending on the amount of CD required. Thus, it is necessary to increase solubilization efficiency in order to use smaller amounts of CD. This can be achieved by adding small amounts of water-soluble polymers to the system. This review addresses aspects related to drug complexation with CDs using water-soluble polymers to optimize the amount of CD used in the formulation in order to increase drug solubility and reduce dosage form volume.Ciclodextrinas (CDs são oligossacarídeos cíclicos, compostos por unidades D-glicopiranosídicas ligadas entre si por meio de ligações glicosídicas e sua principal propriedade está na capacidade de alterar as características físico-químicas e biológicas de fármacos com baixa solubilidade por meio da formação de complexos de inclusão fármaco:CD. Para a formação dos complexos de inclusão a molécula hospedeira necessita ajustar-se total ou parcialmente no interior da cavidade da CD, onde este ajuste está diretamente ligado a propriedades físico-químicas da molécula hóspede e hospedeira, facilidade de alojamento da molécula hóspede no interior da cavidade da CD, estequiometria, dose terapêutica e toxicidade. No entanto, as formas farmacêuticas podem atingir um elevado volume, em função da quantidade de CD requerida, sendo necessário aumentar sua efici

  14. Raised soluble P-selectin moderately accelerates atherosclerotic plaque progression.

    Science.gov (United States)

    Woollard, Kevin J; Lumsden, Natalie G; Andrews, Karen L; Aprico, Andrea; Harris, Emma; Irvine, Jennifer C; Jefferis, Ann-maree; Fang, Lu; Kanellakis, Peter; Bobik, Alex; Chin-Dusting, Jaye P F

    2014-01-01

    Soluble P-selectin (sP-selectin), a biomarker of inflammatory related pathologies including cardiovascular and peripheral vascular diseases, also has pro-atherosclerotic effects including the ability to increase leukocyte recruitment and modulate thrombotic responses in vivo. The current study explores its role in progressing atherosclerotic plaque disease. Apoe-/- mice placed on a high fat diet (HFD) were given daily injections of recombinant dimeric murine P-selectin (22.5 µg/kg/day) for 8 or 16 weeks. Saline or sE-selectin injections were used as negative controls. In order to assess the role of sP-selectin on atherothrombosis an experimental plaque remodelling murine model, with sm22α-hDTR Apoe-/- mice on a HFD in conjunction with delivery of diphtheria toxin to induce targeted vascular smooth muscle apoptosis, was used. These mice were similarly given daily injections of sP-selectin for 8 or 16 weeks. While plaque mass and aortic lipid content did not change with sP-selectin treatment in Apoe-/- or SM22α-hDTR Apoe-/- mice on HFD, increased plasma MCP-1 and a higher plaque CD45 content in Apoe-/- HFD mice was observed. As well, a significant shift towards a more unstable plaque phenotype in the SM22α-hDTR Apoe-/- HFD mice, with increased macrophage accumulation and lower collagen content, leading to a lower plaque stability index, was observed. These results demonstrate that chronically raised sP-selectin favours progression of an unstable atherosclerotic plaque phenotype.

  15. [Good laboratory practice of equilibrium solubility measurement II. Study of pH-dependent solubility of ionizable compounds].

    Science.gov (United States)

    Völgyi, Gergely; Baka, Edit; Kovács, Márta; Takácsné, Novák Krisztina

    2011-01-01

    In this paper the pH-equilibrium solubility profiles of ionizable drugs are presented. The aim of the present work was to study the validity of the Henderson-Hasselbalch (HH) relationship in the case of structurally diverse weak bases. In the case of monoprotic bases, namely papaverine, promethazine and propafenone the experimental equilibrium solubility data precisely follow the theoretical HH curve until the limit of salt solubility. The common ion effect on salt solubility was found to be significant at low pHs. Deviation from the HH equation in the case of dibasic quetiapine hydrogen fumarate can be easily interpreted with the formation of different salt compositions. The significance of pH control and the effect of the salt form (e.g., fumarate) was also investigated. It is critical that the pKa value and the intrinsic solubility are accurately determined when the HH relationship is used to predict the pH-dependent aqueous solubility of drugs.

  16. β-Cyclodextrin-dextran polymers for the solubilization of poorly soluble drugs

    DEFF Research Database (Denmark)

    Di Cagno, Massimiliano; Nielsen, Thorbjørn Terndrup; Lambertsen Larsen, Kim

    2014-01-01

    NMR and isothermal titration calorimetry. Moreover, thermodynamic parameters of the complexation reaction between β-CD units and drug molecules in terms of molar enthalpy of complexation, equilibrium constant, and stability of the β-CD units/drug molecules complexes were also measured. For evaluation......The aim of this work was to assess the potential of β-cyclodextrin (β-CD)-dextran polymers for drug delivery, in terms of molecular mass, the complexation reaction mechanism using a model drug, and solubilization efficiency for examples of poorly soluble model drugs. For this purpose size analysis...

  17. The Serum Levels of Soluble Fas Ligand and Soluble Fas Receptor in Patients with chronic congestive heart failure

    Institute of Scientific and Technical Information of China (English)

    李刚; 令狐华; 魏良明; 陈运贞

    2002-01-01

    Objectives To investigate the association of soluble Fas ligand(sFasL) andsoluble Fas receptor(sFas)with human chronic congestive heart failure(CHF). Methods The serumlevel of sFasL and sFas in 33 patients with CHF (13in cardiac function class Ⅱ, 17 in class Ⅲ, 3 inclass IV, NYHA) was assessed with enzyme- linkedimmunosorbent assay, and was compared with that of18 age-, blood pressure- matched patients with cardiac function class I (NYHA). Results There wasno difference in the level of sFasL between the twogroups [CHF group: 231.50 + / - 84.50 (cardiacfunction class Ⅱ 216.50+/-96.00 , class Ⅲ226.80 + / - 85.70, class IV 244. 00 + / - 73.00 )vs. cardiac function class I group: 217.50+ /-89. 00 pg/mL, P>0. 05 ]. However, the level of sFaswas significantly higher in the patients with CHF thanthose of cardiac function class I group [CHF group:1353.30+/-507.71 (cardiac function class Ⅱ1154.85+/-371.20 , class Ⅲ 1412.88+/-493.62, class IV1875.67 + / - 806. 10) vs, cardiacfunction class I group: 983.11 + / -461.26 pg/mL,P<0. 05 ]. Conclusions sFasL was not associatedwith human CHF. However, the elevation of serumlevel of sFas was proportion to the severity of humanCHF. sFas may play an important role in the patho-genesis of human CHF.

  18. Proteolysis during ensilage of forages varying in soluble sugar content.

    Science.gov (United States)

    Davies, D R; Merry, R J; Williams, A P; Bakewell, E L; Leemans, D K; Tweed, J K

    1998-02-01

    The effect of contrasting concentrations of water-soluble carbohydrates of herbage on silage fermentation and composition was examined using grass with high [250 g/kg of dry matter (DM)] concentrations of water-soluble carbohydrates and grass and clover with low (66 g/kg of DM) concentrations of water-soluble carbohydrates. Herbages were ensiled untreated, after inoculation with lactic acid bacteria, or after treatment with formic acid. Good quality silages were produced from herbage with high concentrations of water-soluble carbohydrates, regardless of treatment, and all pH values were below 3.7 after 90 d of ensilage. However, the silage formed from inoculated herbage had a significantly lower concentration of ammonia N and a significantly higher proportion of residual ribulose-1,5-bisphosphate carboxylase compared with the other two silages. Fast protein liquid chromatography (Pharmacia, Uppsala, Sweden) was used to measure ribulose-1,5-bisphosphate carboxylase, and measurement of true plant protein fractions in herbage and silage showed benefits over traditional measurements such as the measurement of N and ammonia N. Herbages with low concentrations of water-soluble carbohydrates produced inferior quality silages that had lower ribulose-1,5-bisphosphate carboxylase contents and higher ammonia N contents, regardless of treatment; few significant differences were observed among treatments. Under good ensiling conditions, when available water-soluble carbohydrate is adequate, the use of inoculants can improve fermentation characteristics and increase the ribulose-1,5-bisphosphate carboxylase content of silages. However, when the herbage has low concentrations of water-soluble carbohydrates, even in inoculated herbages, lactic acid bacteria may follow a heterofermentative pathway instead of a homofermentative pathway, which can result in a decrease in silage quality and a reduction in intact ribulose-1,5-bisphosphate carboxylase.

  19. One-pot synthesis and control of aqueous soluble and organic soluble carbon dots from a designable waterborne polyurethane emulsion

    Science.gov (United States)

    Gu, Jiangjiang; Hu, Donghua; Huang, Jin; Huang, Xin; Zhang, Qiuhong; Jia, Xudong; Xi, Kai

    2016-02-01

    Carbon dots (CDs) have a wide range of applications and have drawn great interest in the recent decade. The fabrication and control of CDs with different solubilities are still urgent problems for their practical use. In this paper, aqueous soluble and organic soluble CDs (ACDs, OCDs) were produced by one-pot hydrothermal treatment of a designable waterborne polyurethane (WPU) emulsion. The difference in the solubility and fluorescence of these two kinds of CDs was attributed to the various functional groups on the surface, which were derived from the different segment fragments formed by hydrothermal treatment of a block polymer. It was found that the yields of the ACDs and OCDs could be regulated by means of selecting different soft segments in WPU. The more hydrophobic soft segments could result in an increase of the OCDs and a decrease of the ACDs. While the soft segments were hydrophilic or hydrolysable under hydrothermal conditions, only ACDs were obtained. The ACDs had good fluorescence and showed low cytotoxicity for use in multicolour bio-imaging. The OCDs processed good solubility in a wide range of organic solvents and were suitable for preparing fluorescent composite films with polymers.Carbon dots (CDs) have a wide range of applications and have drawn great interest in the recent decade. The fabrication and control of CDs with different solubilities are still urgent problems for their practical use. In this paper, aqueous soluble and organic soluble CDs (ACDs, OCDs) were produced by one-pot hydrothermal treatment of a designable waterborne polyurethane (WPU) emulsion. The difference in the solubility and fluorescence of these two kinds of CDs was attributed to the various functional groups on the surface, which were derived from the different segment fragments formed by hydrothermal treatment of a block polymer. It was found that the yields of the ACDs and OCDs could be regulated by means of selecting different soft segments in WPU. The more

  20. Characterization of antibodies in single-chain format against the E7 oncoprotein of the Human papillomavirus type 16 and their improvement by mutagenesis

    Directory of Open Access Journals (Sweden)

    Accardi Luisa

    2007-01-01

    Full Text Available Abstract Background Human papillomaviruses (HPV are the etiological agents of cervical cancer. The viral E7 protein plays a crucial role in viral oncogenesis. Many strategies have been explored to block the E7 oncoprotein activity. The single-chain variable antibody fragments (scFvs are valuable tools in cancer immunotherapy and can be used as "intracellular antibodies" to knock out specific protein functions. For both in vivo and in vitro employment, the scFv intrinsic solubility and stability are important to achieve long-lasting effects. Here we report the characterization in terms of reactivity, solubility and thermal stability of three anti-HPV16 E7 scFvs. We have also analysed the scFv43 sequence with the aim of improving stability and then activity of the antibody, previously shown to have antiproliferative activity when expressed in HPV16-positive cells. Methods The three anti-HPV16 E7 scFv 32, 43 51 were selected from the ETH-2 "phage-display" library. Thermal stability was evaluated with ELISA by determining the residual activity of each purified scFv against the recombinant HPV16 E7, after incubation in the presence of human seroalbumine for different time-intervals at different temperatures. Sequence analysis of the scFvs was performed with BLAST and CLUSTALL programs. The scFv43 aminoacid changes were reverted back to the consensus sequence from the immunoglobuline database by site-directed mutagenesis. ScFv solubility was evaluated with Western blotting by determining their relative amounts in the soluble and insoluble fractions of both prokaryotic and eukaryotic systems. Results ScFv51 was the most thermally stable scFv considered. Sequence analysis of the most reactive scFv43 has evidenced 2 amino acid changes possibly involved in molecule stability, in the VH and VL CDR3 regions respectively. By mutagenesis, two novel scFv43-derived scFvs were obtained, scFv43 M1 and M2. ScFv43 M2 showed to have improved thermal stability and

  1. Partial-solubility parameters of naproxen and sodium diclofenac.

    Science.gov (United States)

    Bustamante, P; Peña, M A; Barra, J

    1998-09-01

    The expanded Hansen method was tested for determination of the solubility parameters of two non-steroidal anti-inflammatory drugs, naproxen and sodium diclofenac. This work describes for the first time the application of the method to the sodium salt of a drug. The original dependent variable of the expanded Hansen method, involving the activity coefficient of the drug, was compared with the direct use of the logarithm of the mole fraction solubility 1nX2 in the solubility models. The solubility of both drugs was measured in pure solvents of several chemical classes and the activity coefficient was obtained from the molar heat and the temperature of fusion. Differential scanning calorimetry was performed on the original powder and on the solid phase after equilibration with the pure solvents, enabling detection of possible changes of the thermal properties of the solid phase that might change the value of the activity coefficient. The molar heat and temperature of fusion of sodium diclofenac could not be determined because this drug decomposed near the fusion temperature. The best results for both drugs were obtained with the dependent variable 1nX2 in association with the four-parameter model which includes the acidic and basic partial-solubility parameters delta(a) and delta(b) instead of the Hansen hydrogen bonding parameter delta(h). Because the dispersion parameter does not vary greatly from one drug to another, the variation of solubility among solvents is largely a result of the dipolar and hydrogen-bonding parameters, a fact that is being consistently found for other drugs of small molecular weight. These results support earlier findings with citric acid and paracetamol that the expanded Hansen approach is suitable for determining partial-solubility parameters. The modification introduced in the expanded Hansen method, i.e. the use of 1nX2 as the dependent variable, provides better results than the activity coefficient used in the original method. This is

  2. Helix kinks are equally prevalent in soluble and membrane proteins.

    Science.gov (United States)

    Wilman, Henry R; Shi, Jiye; Deane, Charlotte M

    2014-09-01

    Helix kinks are a common feature of α-helical membrane proteins, but are thought to be rare in soluble proteins. In this study we find that kinks are a feature of long α-helices in both soluble and membrane proteins, rather than just transmembrane α-helices. The apparent rarity of kinks in soluble proteins is due to the relative infrequency of long helices (≥20 residues) in these proteins. We compare length-matched sets of soluble and membrane helices, and find that the frequency of kinks, the role of Proline, the patterns of other amino acid around kinks (allowing for the expected differences in amino acid distributions between the two types of protein), and the effects of hydrogen bonds are the same for the two types of helices. In both types of protein, helices that contain Proline in the second and subsequent turns are very frequently kinked. However, there are a sizeable proportion of kinked helices that do not contain a Proline in either their sequence or sequence homolog. Moreover, we observe that in soluble proteins, kinked helices have a structural preference in that they typically point into the solvent.

  3. Total and soluble oxalate content of some Indian spices.

    Science.gov (United States)

    Ghosh Das, Sumana; Savage, G P

    2012-06-01

    Spices, such as cinnamon, cloves, cardamom, garlic, ginger, cumin, coriander and turmeric are used all over the world as flavouring and colouring ingredients in Indian foods. Previous studies have shown that spices contain variable amounts of total oxalates but there are few reports of soluble oxalate contents. In this study, the total, soluble and insoluble oxalate contents of ten different spices commonly used in Indian cuisine were measured. Total oxalate content ranged from 194 (nutmeg) to 4,014 (green cardamom) mg/100 g DM, while the soluble oxalate contents ranged from 41 (nutmeg) to 3,977 (green cardamom) mg/100 g DM. Overall, the percentage of soluble oxalate content of the spices ranged from 4.7 to 99.1% of the total oxalate content which suggests that some spices present no risk to people liable to kidney stone formation, while other spices can supply significant amounts of soluble oxalates and therefore should be used in moderation.

  4. Effectiveness of fluidized pellet bed for removing soluble contaminants

    Institute of Scientific and Technical Information of China (English)

    WANG Xiaochang; LI Zhihua; WANG Zhen; LI Jinrong; LI Jiayu; CHEN Rong

    2009-01-01

    Fluidized pellet bed (FPB) has been successfully applied in water and wastewater treatment. However, the removal mechanism of contaminants especially the soluble ones, is still unclear. This study aimed to evaluate the effectiveness of FPB reactor for removing soluble contaminants from synthetic wastewater. By only coagulation through jar test operation with addition of polyaluminium chloride (PACl) as primary coagulant and polyacryamide (PAM) as coagulant-aid, the removals of soluble chemical oxygen demand (COD), suspended solids (SS), total phosphorus (TP), and NH4+-N were found to be only 2.2%--7.5%, 5.7%--25.5%, and 9.9%--18.5%, respectively. However, by FPB operation under the same dosage of coagulants, these values increased to 82.7%, 37.2%, and 50%, indicating that the formation of pellets in the FPB effectively enhanced the removal of soluble contaminants. By careful comparison of the settleablility and filterability of the pollutants after coagulation, the originally soluble contaminants could be divided into three groups, namely: (i) coagulated-and-settleable, (ii) coagulated-but-nonsettleable, and (iii) uncoagulable. It was found that not only the first two groups but also a large part of the third group could be effectively removed by FPB operation. However, the mechanism for the removal of the uncoagulable pollutants by FPB operation still needs further investigation.

  5. Solubility of β-cyclodextrin in different mixed solvents

    Institute of Scientific and Technical Information of China (English)

    Yu Yong; Li Jiguang; Sun Yan; Liang Qianqing; Peng Xiaoming; Liu Yansheng; Hu Yufeng

    2008-01-01

    The solubility of β-cyclodextrin(β-CD)in ionic liquid/N,N-dimethyl-acetamide(IL/DMAC)mixed solvent and in LiCl/DMAC mixed solvent was investigated at 323.15 K and 353.15 K.The results showed that the solubility of β-CD in IL/DMAC system increased with increasing temperature,but decreased in LiCl/DMAC system.β-CD had the highest solubility in IL/DMAC system with[Cl]- or[Br]- anions.The solubility of β-CD in LiCl/DMAC system was lower than that in IL/DMAC system with [Cl]- or[Br]- anions but higher than that in IL/DMAC system with weak-coordinated anions(e.g[BF4]- or[PF6]-).The effects of substituent groups(benzyl and butyl)of cation and the structure of cations on β-cyclodextrin solubility were also investigated.

  6. The impacts of surface polarity on the solubility of nanoparticle.

    Science.gov (United States)

    Zhu, Jianzhuo; Ou, Xinwen; Su, Jiguo; Li, Jingyuan

    2016-07-28

    In order to study the dependence of water solubility and hydration behavior of nanoparticles on their surface polarity, we designed polar nanoparticles with varying surface polarity by assigning atomic partial charge to the surface of C60. The water solubility of the nanoparticle is enhanced by several orders of magnitude after the introduction of surface polarity. Nevertheless, when the atomic partial charge grows beyond a certain value (qM), the solubility continuously decreases to the level of nonpolar nanoparticle. It should be noted that such qM is comparable with atomic partial charge of a variety of functional groups. The hydration behaviors of nanoparticles were then studied to investigate the non-monotonic dependence of solubility on the surface polarity. The interaction between the polar nanoparticle and the hydration water is stronger than the nonpolar counterpart, which should facilitate the dissolution of the nanoparticles. On the other hand, the surface polarity also reduces the interaction of hydration water with the other water molecules and enhances the interaction between the nanoparticles which may hinder their dispersion. Besides, the introduction of surface polarity disturbs and even rearranges the hydration structure of nonpolar nanoparticle. Interestingly, the polar nanoparticle with less ordered hydration structure tends to have higher water solubility.

  7. Uranium(VI) solubility in carbonate-free WIPP brine

    Energy Technology Data Exchange (ETDEWEB)

    Lucchini, J.F.; Borkowski, M.; Richmann, M.K.; Reed, D.T. [Los Alamos National Lab. (LANL), Carlsbad, NM (United States). Earth and Environmental Sciences Div.

    2013-08-01

    The solubility of uranium(VI) was determined in WIPP-relevant brines as a function of pC{sub H+} and ionic strength, in the absence of carbonate. Carbonate concentration was below 2 x 10{sup -5} M, measured using the gas chromatography method. In the absence of carbonate, the uranium(VI) solubilities were about x 10{sup -6} M in GWB at pC{sub H+} {>=} 7 and about 10{sup -8}-10{sup -7} M in ERDA-6 brine at pC{sub H+} {>=} 8. Solubility of uranium(VI) was also measured in NaCl media at the same levels as in ERDA-6 brine. The data established a uranium solubility that was 10-100 times lower than published results from Diaz-Arocas and Grambow, and they are in good agreement with modeling results and other literature data. In the absence of carbonate, hydrolysis was the main complexation and precipitation mechanisms for uranium(VI) solubility at high ionic strength and pC{sub H+} {>=} 7. However, the effect of borate complexation was noticeable at pC{sub H+} {proportional_to} 8-9. (orig.)

  8. Protein Modifications after Foxtail Millet Extrusion: Solubility and Molecular Weight

    Directory of Open Access Journals (Sweden)

    Xuewei Zhao

    2015-03-01

    Full Text Available With the aim of illustrating the effects of extrusion cooking on the solubility of proteins in foxtail millet and their molecular basis, foxtail millet was extruded at five barrel temperature profiles and feed moisture contents. The proteins of raw and extrudate samples were extracted with six solutions sequentially. Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE of total protein and Starch Granule-Associate Protein (SGAP was performed. Extrusion caused a significant decrease in globulin, setarin and glutelin fractions with a corresponding increase in SDS- and SDS+2-ME-soluble and residual fractions. Increasing extrusion temperature or moisture content all led to SDS-soluble fraction decrease, while SDS+2-ME-soluble fraction increase. SDS-PAGE demonstrated that disulfide bond cross-linking occurred among glutelin and with setarin subunits. Extrusion had a less pronounced impact on the 60 kDa SGAP than the other middle-high molecular weight subunits. It is the protein-protein interaction shift from electrostatic force to hydrophobic and/or hydrogen forces and covalent disulfide cross-links that contributed to the decreased solubility of protein in foxtail millet extrudates.

  9. Distribution of soluble amino acids in maize endosperm mutants

    Directory of Open Access Journals (Sweden)

    Toro Alejandro Alberto

    2003-01-01

    Full Text Available For human nutrition the main source of vegetable proteins are cereal and legume seeds. The content of total soluble amino acids in mature endosperm of wild-type, opaque and floury maize (Zea mays L. mutants were determined by HPLC. The total absolute concentration of soluble amino acids among the mutants varied depending on the mutant. The o11 and o13 mutants exhibited the highest average content, whereas o10, fl3 and fl1 exhibited the lowest average content. In general, the mutants exhibited similar concentrations of total soluble amino acids when compared to the wild-type lines, with the clear exception of mutants o11 and fl1, with the o11 mutant exhibiting a higher concentration of total soluble amino acids when compared to its wild-type counterpart W22 and the fl1 mutant a lower concentration when compared to its wild-type counterpart Oh43. For methionine, the mutants o2 and o11 and wild-type Oh43 exhibited the highest concentrations of this amino acid. Significant differences were not observed between mutants for other amino acids such as lysine and threonine. The high lysine concentrations obtained originally for these mutants may be due to the amino acids incorporated into storage proteins, but not those present in the soluble form.

  10. Fat-soluble and water-soluble vitamin contents of breast milk from Japanese women.

    Science.gov (United States)

    Sakurai, Takayuki; Furukawa, Miyako; Asoh, Miyuki; Kanno, Takahiro; Kojima, Tadashi; Yonekubo, Akie

    2005-08-01

    To determine the concentrations of fat-soluble and water-soluble vitamins in the maternal milk of Japanese women, we collected human milk samples from more than 4,000 mothers living throughout Japan between December 1998 and September 1999, and defined as group A the 691 samples among these that met the following conditions: breast milk of mothers who were under 40 y of age, who did not smoke habitually and/or use vitamin supplements, and whose babies showed no symptoms of atopy and had birth weights of 2.5 kg or more. We then analyzed the contents of vitamins individually. Large differences were observed among the contents of individual human milk samples. The mean contents of each component were as follows: vitamin A, 159.0 +/- 95.2 IU/100 mL; vitamin E, 0.325 +/- 0.165 alpha-TE mg/100mL; vitamin D3 (cholecalciferol), 8.0 +/- 10.7 ng/100mL; vitamin B1 (thiamin), 12.3 +/- 3.2 microg/100 mL; vitamin B2, 38.4 +/- 12.7 microg/100 mL; vitamin B6, 5.7 +/- 2.5 microg/100 mL; vitamin B12, 0.04 +/- 0.02 microg/100 mL; vitamin C, 5.1 +/- 1.9 mg/100 mL; biotin, 0.50 +/- 0.23 microg/100 mL; choline, 9.2 +/- 1.8 mg/100 mL; folic acid, 6.2 +/- 2.9 microg/100 mL; inositol, 12.6 +/- 3.6 mg/100 mL; niacin (nicotinamide), 32.9 +/- 20.4 microg/100 mL and pantothenic acid, 0.27 +/- 0.09 mg/100 mL. The concentrations of derivatives and/or related compounds of vitamin A (retinol, beta-carotene), vitamin E (alpha-, beta-, gamma-, and delta-tocopherol), and B2 (riboflavin, FMN, and FAD) were determined separately. The contents of each were found to vary greatly as the duration of lactation increased. The present results indicate that it is necessary to evaluate individual differences in human milk in order to perform valid research regarding infant formula.

  11. EFFECT OF NON IONIC SURFACTANT ON THE SOLUBILITY AND DISSOLUTION OF SIMVASTATIN

    Directory of Open Access Journals (Sweden)

    Kumar Sandeep

    2011-03-01

    Full Text Available Various investigators have been facing the problems in improving solubility, dissolution and bioavailability of poorly water soluble drugs. Solid dispersion is a unique approach to improve the solubility of poorly water soluble drugs. In the present study an attempt has been made to improve the solubility and dissolution of poorly soluble drug Simvastatin (SIM using Poloxamer 188 (PXM as carrier. The kneading technique was used to prepare solid dispersions in different ratios. In conclusion, solubility and dissolution enhancement of SIM was improved by preparing its solid dispersion with PXM.

  12. HETEROJUNCTION DIODES OF POROUS SILICON WITH SOLUBLE POLYANILINE

    Institute of Scientific and Technical Information of China (English)

    Jun-hua Fan; Mei-xiang Wan; Dao-ben Zhu

    1999-01-01

    Two kinds of heterojunction diodes of porous silicon (PS) with soluble polyaniline (PANI) were fabricated. One is a heterojunction diode of PS with water-soluble copolymer of polyaniline(PAOABSA),Al/PS-PAOABSA/Au cell as rectifying diode. Another is a heterojunction diode of PS with soluble polyaniline doped with DBSA, Al/PS-PANI (DBSA)/Au cell as light emitting diode (LED). The rectifying characteristics of the rectifying diodes were measured as a function of the degree of sulfonation and thickness of the copolymers, as well as oxidation of PS. The rectifying ratio of the heterojunction can reach 5.0×104 at ±3 V bias. For the LED, the photoluminescence (PL) and electroluminescence (EL) spectra were measured and discussed.

  13. Solubilities of gases in simulated Tank 241-SY-101 wastes

    Energy Technology Data Exchange (ETDEWEB)

    Norton, J.D.; Pederson, L.R.

    1995-09-01

    Oxygen, nitrogen, hydrogen, methane, and nitrous oxide solubilities were evaluated as a function of temperature in SYl-SIM-93B, a homogeneous simulated waste mixture containing sodium hydroxide, sodium nitrite, sodium nitrate, sodium aluminate, and sodium carbonate, the principal inorganic constituents of the wastes in Tank 241-SY-101. Ammonia solubility data for this simulated waste was obtained as a function of temperature in an earlier study. The choice of a homogeneous waste mixture in this study has the advantage of eliminating complications associated with a changing electrolyte concentration as a function of temperature that would be encountered with a slurry simulant. Dissolution is one of the means by which gases may be retained in Hanford Site wastes. While models are available to estimate gas solubilities in electrolyte solutions, few data are in existence that pertain to highly concentrated, multicomponent electrolytes such as those stored in Hanford Site waste tanks.

  14. Thermodynamic approach to boron nitride nanotube solubility and dispersion

    Science.gov (United States)

    Tiano, A. L.; Gibbons, L.; Tsui, M.; Applin, S. I.; Silva, R.; Park, C.; Fay, C. C.

    2016-02-01

    Inadequate dispersion of nanomaterials is a critical issue that significantly limits the potential properties of nanocomposites and when overcome, will enable further enhancement of material properties. The most common methods used to improve dispersion include surface functionalization, surfactants, polymer wrapping, and sonication. Although these approaches have proven effective, they often achieve dispersion by altering the surface or structure of the nanomaterial and ultimately, their intrinsic properties. Co-solvents are commonly utilized in the polymer, paint, and art conservation industries to selectively dissolve materials. These co-solvents are utilized based on thermodynamic interaction parameters and are chosen so that the original materials are not affected. The same concept was applied to enhance the dispersion of boron nitride nanotubes (BNNTs) to facilitate the fabrication of BNNT nanocomposites. Of the solvents tested, dimethylacetamide (DMAc) exhibited the most stable, uniform dispersion of BNNTs, followed by N,N-dimethylformamide (DMF), acetone, and N-methyl-2-pyrrolidone (NMP). Utilizing the known Hansen solubility parameters of these solvents in comparison to the BNNT dispersion state, a region of good solubility was proposed. This solubility region was used to identify co-solvent systems that led to improved BNNT dispersion in poor solvents such as toluene, hexane, and ethanol. Incorporating the data from the co-solvent studies further refined the proposed solubility region. From this region, the Hansen solubility parameters for BNNTs are thought to lie at the midpoint of the solubility sphere: 16.8, 10.7, and 9.0 MPa1/2 for δd, δp, and δh, respectively, with a calculated Hildebrand parameter of 21.8 MPa1/2.Inadequate dispersion of nanomaterials is a critical issue that significantly limits the potential properties of nanocomposites and when overcome, will enable further enhancement of material properties. The most common methods used to

  15. Determination and Correlation of Solubility of Nonivamide in Different Solvents☆

    Institute of Scientific and Technical Information of China (English)

    Yifeng Cao; Qiwei Yang; Huabin Xing⁎; Zongbi Bao; Baogen Su; Yiwen Yang; Qilong Ren

    2014-01-01

    The solubility of nonivamide in dimethyl sulfoxide, methanol, acetone, ethyl acetate, methyl tert-butyl ether, ace-tonitrile, n-hexane and water over the temperature range of 293.2 K to 323.2 K was measured. The results reveal that the solubility of nonivamide is greatly influenced by the hydrogen-bond basicity of solvent and increases with temperature. The experimental data were correlated with the modified Apelblat equation. The dissolution enthalpy and entropy of nonivamide in different solvents were obtained from the correlation of lnx with 1/T using the van't Hoff equation. The calculated nonivamide solubility is in good agreement with experimental data for most of the solvents.

  16. Poliovirus Mutants Resistant to Neutralization with Soluble Cell Receptors

    Science.gov (United States)

    Kaplan, Gerardo; Peters, David; Racaniello, Vincent R.

    1990-12-01

    Poliovirus mutants resistant to neutralization with soluble cellular receptor were isolated. Replication of soluble receptor-resistant (srr) mutants was blocked by a monoclonal antibody directed against the HeLa cell receptor for poliovirus, indicating that the mutants use this receptor to enter cells. The srr mutants showed reduced binding to HeLa cells and cell membranes. However, the reduced binding phenotype did not have a major impact on viral replication, as judged by plaque size and one-step growth curves. These results suggest that the use of soluble receptors as antiviral agents could lead to the selection of neutralization-resistant mutants that are able to bind cell surface receptors, replicate, and cause disease.

  17. Improved solubility of replication factor C (RFC) Walker A mutants.

    Science.gov (United States)

    Marzahn, Melissa R; Bloom, Linda B

    2012-06-01

    Protein insolubility often poses a significant problem during purification protocols and in enzyme assays, especially for eukaryotic proteins expressed in a recombinant bacterial system. The limited solubility of replication factor C (RFC), the clamp loader complex from Saccharomyces cerevisiae, has been previously documented. We found that mutant forms of RFC harboring a single point mutation in the Walker A motif were even less soluble than the wild-type complex. The addition of maltose at 0.75 M to the storage and assay buffers greatly increases protein solubility and prevents the complex from falling apart. Our analysis of the clamp loading reaction is dependent on fluorescence-based assays, which are environmentally sensitive. Using wt RFC as a control, we show that the addition of maltose to the reaction buffers does not affect fluorophore responses in the assays or the enzyme activity, indicating that maltose can be used as a buffer additive for further downstream analysis of these mutants.

  18. Solubility and Bioavailability Enhancement of Poorly Aqueous Soluble Atorvastatin: In Vitro, Ex Vivo, and In Vivo Studies

    Directory of Open Access Journals (Sweden)

    Madhuri S. Rodde

    2014-01-01

    Full Text Available The objective of this investigation was to improve the solubility of the poorly water soluble drug atorvastatin (ATR, using solid dispersion (SD techniques, with Neem Gum (NG as a hydrophilic carrier. The effects of the polymer concentration and method of preparation on the solubility and dissolution rate were studied. The results showed that the solubility of ATR increases with increasing NG concentration. However, dissolution rate of ATR from its SD was dependent on the method used to prepare SD. An in vitro drug release study revealed that the solvent evaporation technique is a more convenient and effective method of preparing SD than kneading method. The SD was characterized using DSC, SEM, and XRD study. An in vivo study was performed in which the 3-hydroxy-3-methyl-glutaryl-coenzyme A (HMG CoA reductase inhibition activity was measured. A significant reduction in HMG CoA reductase activity was observed with SD of ATR compared with the plain drug. An ex vivo absorption study was carried out using modified apparatus developed in our laboratory. The in vitro drug release and in vivo and ex vivo studies clearly demonstrated the potential of hydrophilic NG in enhancing the solubility, dissolution rate, and bioavailability of ATR.

  19. Binding of HIV-1 gp41-directed neutralizing and non-neutralizing fragment antibody binding domain (Fab and single chain variable fragment (ScFv antibodies to the ectodomain of gp41 in the pre-hairpin and six-helix bundle conformations.

    Directory of Open Access Journals (Sweden)

    John M Louis

    Full Text Available We previously reported a series of antibodies, in fragment antigen binding domain (Fab formats, selected from a human non-immune phage library, directed against the internal trimeric coiled-coil of the N-heptad repeat (N-HR of HIV-1 gp41. Broadly neutralizing antibodies from that series bind to both the fully exposed N-HR trimer, representing the pre-hairpin intermediate state of gp41, and to partially-exposed N-HR helices within the context of the gp41 six-helix bundle. While the affinities of the Fabs for pre-hairpin intermediate mimetics vary by only 2 to 20-fold between neutralizing and non-neutralizing antibodies, differences in inhibition of viral entry exceed three orders of magnitude. Here we compare the binding of neutralizing (8066 and non-neutralizing (8062 antibodies, differing in only four positions within the CDR-H2 binding loop, in Fab and single chain variable fragment (ScFv formats, to several pre-hairpin intermediate and six-helix bundle constructs of gp41. Residues 56 and 58 of the mini-antibodies are shown to be crucial for neutralization activity. There is a large differential (≥ 150-fold in binding affinity between neutralizing and non-neutralizing antibodies to the six-helix bundle of gp41 and binding to the six-helix bundle does not involve displacement of the outer C-terminal helices of the bundle. The binding stoichiometry is one six-helix bundle to one Fab or three ScFvs. We postulate that neutralization by the 8066 antibody is achieved by binding to a continuum of states along the fusion pathway from the pre-hairpin intermediate all the way to the formation of the six-helix bundle, but prior to irreversible fusion between viral and cellular membranes.

  20. 抗黄曲霉毒素B1单链抗体在Sf9昆虫细胞中的表达与性质分析%Expression and Characterization of Anti-AFB1 scFv Expressed in Sf9 Cell

    Institute of Scientific and Technical Information of China (English)

    刘爱平; 李诚; 刘书亮; 王小红; 陈福生

    2016-01-01

    目的:在原核表达抗黄曲霉毒素B1(aflatoxin B1,AFB1)单链抗体(single chain Fv fragment,scFv)研究的基础上,为进一步了解和提高抗AFB1 scFv的活性,利用Sf9昆虫细胞表达抗AFB1scFv,并对其活性进行探索研究.方法:构建pFastBac 1-scFv2E6VHVL重组质粒,将重组质粒转化Escherichia coli(E.coli)DH10Bac细胞,进行蓝白斑筛选,挑取阳性克隆.提取相应的重组杆状病毒穿梭载体Bacmid侵染Sf9昆虫细胞,表达scFv,利用镍亲和层析法纯化scFv,并以ELISA检测scFv活性.结果:蓝白斑筛选后,经菌落PCR和测序验证挑取的白斑阳性单克隆含有正确的单链抗体基因.提取相应的重组杆状病毒穿梭载体Bacmid侵染Sf9昆虫细胞,通过Westem blot检测得知抗AFB1 scFv在Sf9昆虫细胞中成功表达.AFB1对scFv的抑制中浓度(IC50)为30μg/ml.结论:与E.coli BL21 (DE3)表达系统相比,scFv灵敏度转好,但仍有较大提升空间.

  1. Innovative method and apparatus for the deep cleaning of soluble salts from mortars and lithic materials

    Science.gov (United States)

    Gaggero, Laura; Ferretti, Maurizio; Torrielli, Giulia; Caratto, Valentina

    2016-04-01

    Porous materials (e.g. plasters, mortars, concrete, and the like) used in the building industry or in artworks fail to develop, after their genesis, salts such as nitrates, carbonates (e.g. potassium carbonate, magnesium carbonate, calcium carbonate), chlorides (e.g. sodium chloride) and/or others, which are a concurrent cause of material deterioration phenomena. In the case of ancient or cultural heritage buildings, severe damage to structures and works of art, such as fresco paintings are possible. In general, in situ alteration pattern in mortars and frescoes by crystallization of soluble salts from solutions is caused by capillar rise or circulation in damp walls. Older buildings can be more subject to capillary rise of ion-rich waters, which, as water evaporates, create salt crystals inside the walls. If this pattern reveals overwhelming upon other environmental decay factors, the extraction of salts is the first restoration to recover the artpiece after the preliminary assessment and mitigation of the causes of soaking. A new method and apparatus, patented by University of Genoa [1] improves the quality and durability of decontamination by soluble salts, compared with conventional application of sepiolite or cellulose wraps. The conventional application of cellulose or sepiolite requires casting a more or less thick layer of wrap on the mortar, soaking with distilled water, and waiting until dry. The soluble salts result trapped within the wrap. A set of artificial samples reproducing the stratigraphy of frescoes was contaminated with saline solution of known concentration. The higher quality of the extraction was demonstrated by trapping the salts within layers of Japanese paper juxtaposed to the mortar; the extraction with the dedicated apparatus was operated in a significantly shorter time than with wraps (some hours vs. several days). Two cycles of about 15 minutes are effective in the deep cleaning from contaminant salts. The decontamination was

  2. pH-Dependent solubility and permeability criteria for provisional biopharmaceutics classification (BCS and BDDCS) in early drug discovery.

    Science.gov (United States)

    Varma, Manthena V; Gardner, Iain; Steyn, Stefanus J; Nkansah, Paul; Rotter, Charles J; Whitney-Pickett, Carrie; Zhang, Hui; Di, Li; Cram, Michael; Fenner, Katherine S; El-Kattan, Ayman F

    2012-05-07

    pH-dependent permeability and solubility criteria that can be used to assign provisional biopharmaceutics class at early stage of the drug discovery process. Additionally, such a classification system will enable discovery scientists to assess the potential limiting factors to oral absorption, as well as help predict the drug disposition mechanisms and potential drug-drug interactions.

  3. Plasma Soluble CD163 Level Independently Predicts All-Cause Mortality in HIV-1-Infected Individuals

    DEFF Research Database (Denmark)

    Knudsen, Troels Bygum; Ertner, Gideon; Petersen, Janne;

    2016-01-01

    Background: CD163, a monocyte- and macrophage-specific scavenger receptor, is shed as soluble CD163 (sCD163) during the proinflammatory response. Here, we assessed the association between plasma sCD163 levels and progression to AIDS and all-cause mortality among individuals infected with human im.......35 [95% CI, 1.13–1.63], respectively). Conclusions: Plasma sCD163 was an independent marker of all-cause mortality in a cohort of HIV–infected individuals, suggesting that monocyte/macrophage activation may play a role in HIV pathogenesis and be a target of intervention.......Background: CD163, a monocyte- and macrophage-specific scavenger receptor, is shed as soluble CD163 (sCD163) during the proinflammatory response. Here, we assessed the association between plasma sCD163 levels and progression to AIDS and all-cause mortality among individuals infected with human...... immunodeficiency virus type 1 (HIV). Methods: Plasma sCD163 levels were measured in 933 HIV–infected individuals. Hazard ratios (HRs) with 95% confidence intervals (CIs) associated with mortality were computed by Cox proportional hazards regression. Results: At baseline, 86% were receiving antiretroviral treatment...

  4. Prediction of the Aqueous Solubilities of Polychlorinated Biphenyls

    Institute of Scientific and Technical Information of China (English)

    Shu Shen LIU; Shi Hai CUI; Lian Sheng WANG

    2004-01-01

    Using the molecular electronegativity distance vector descriptors derived directly from the molecular topological structures, the aqueous solubilities of polychlorinated biphenyls(PCBs)were predicted. A three-variable regression equation with correlation coefficient of 0.9739 and the root mean square errors of 0.26 was developed. The descriptors included in the equation represent three interactions between three pairs of atomic types,I.e.,atom-C=and>C=,-C=and-Cl,and-Cland-Cl.It has been proved that the aqueous solubilities of 137 PCB congeners can be accurately predicted as long as there are more than 65 calibration compounds.

  5. A Soluble, Folded Protein without Charged Amino Acid Residues

    DEFF Research Database (Denmark)

    Højgaard, Casper; Kofoed, Christian; Espersen, Roall;

    2016-01-01

    Charges are considered an integral part of protein structure and function, enhancing solubility and providing specificity in molecular interactions. We wished to investigate whether charged amino acids are indeed required for protein biogenesis and whether a protein completely free of titratable...... side chains can maintain solubility, stability, and function. As a model, we used a cellulose-binding domain from Cellulomonas fimi, which, among proteins of more than 100 amino acids, presently is the least charged in the Protein Data Bank, with a total of only four titratable residues. We find...

  6. Preparation of soluble and insoluble polymer supported IBX reagents.

    Science.gov (United States)

    Reed, Neal N; Delgado, Mercedes; Hereford, Kristina; Clapham, Bruce; Janda, Kim D

    2002-08-05

    A series of soluble and insoluble polymer supported versions of the versatile oxidizing reagent IBX has been prepared. Each of the reagents were evaluated for their efficiency in the conversion of benzyl alcohol to benzaldehyde. Results from this study were that the soluble, non-crosslinked polystyrene supported IBX reagent gave the best rate of conversion to benzaldehyde, while the macroporous polymer supported IBX resin provided a superior rate of conversion to benzaldehyde when compared with a gel type resin. The macroporous IBX reagent was also shown to convert a series of alcohols to the corresponding aldehydes and ketones.

  7. Fire Resistance of Wood Impregnated with Soluble Alkaline Silicates

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Giudice

    2007-01-01

    Full Text Available The aim of this paper is to determine the fire performance of wood panels (Araucaria angustifolia impregnated with soluble alkaline silicates. Commercial silicates based on sodium and potassium with 2.5/1.0 and 3.0/1.0 silica/alkali molar ratios were selected; solutions and glasses were previously characterized. Experimental panels were tested in a limiting oxygen chamber and in a two-foot tunnel. Results displayed a high fire-retardant efficiency using some soluble silicates.

  8. About the solubility of reduced SWCNT in DMSO

    Energy Technology Data Exchange (ETDEWEB)

    Guan Jingwen; Martinez-Rubi, Yadienka; Denommee, Stephane; Ruth, Dean; Kingston, Christopher T; Daroszewska, Malgosia; Barnes, Michael; Simard, Benoit [Molecular and Nanomaterial Architectures Group, Steacie Institute for Molecular Sciences, National Research Council of Canada, Ottawa, ON, K1A 0R6 (Canada)], E-mail: benoit.simard@nrc-cnrc.gc.ca

    2009-06-17

    Single-walled carbon nanotubes (SWCNT) have been reduced with sodium naphthalide in THF. The reduced SWCNT are not only soluble in dimethylsulfoxide (DMSO) to form a stable solution/suspension, but also react spontaneously at room temperature with DMSO to evolve hydrocarbon gases and are converted into functionalized SWCNT. The degree of functionalization is about 2C% and the addends are mainly methyl and small oxygen-containing hydrocarbons. The functionalized SWCNT are apparently more soluble and stable in DMSO solution. It may open a new era for further processing and applications.

  9. Poly(trimethylsilylcyclooctatetraene): A soluble conjugated polyacetylene via olefin metathesis

    Energy Technology Data Exchange (ETDEWEB)

    Ginsburg, E.J.; Gorman, C.B.; Grubbs, R.H.; Marder, S.R. (California Institute of Technology, Pasadena (USA))

    1989-09-13

    highly conjugated polymers, such as polyacetylene, polythiophene, and poly(p-phenylene vinylene), have been the subject of intensive research due to their intriguing optical and electronic properties. These parent systems are highly desirable for experimental and theoretical studies due to their simplicity. Their intractability, however, has made characterization an arduous task, and insolubility has severely limited their applications. Researchers have successfully circumvented these obstacles by synthesizing soluble alkyl- and alkoxy-substituted polythiphenes and poly(p-phenylene vinylenes). Analogous soluble highly conjugated polyacetylene derivatives have proven more elusive. The authors report here the synthesis of such a polymer using ring-opening metathesis polymerization (ROMP).

  10. Mechanisms and solubility equations of gas dissolving in water

    Institute of Scientific and Technical Information of China (English)

    付晓泰; 王振平; 卢双舫

    1996-01-01

    The two mechanisms of gas dissolving in water, interstice filling and aquation, are proposed. General equations of gas solubility have been deduced from the mechanisms and experimental observations. Dependence of Henry’s coefficient on temperature, pressure, aquation equilibrium constant and gas molecular wlume is discussed. The theoretical equations were verified by experimental data, which shows that the theoretical results of the solubility of methane are in good agreement with the experimental data in the range of 20 -160℃ and under a pressure of less than 60 MPa.

  11. REFRACTOMETRIC METHOD FOR EVALUATION OF SOYBEAN PROTEIN SOLUBILITY

    Directory of Open Access Journals (Sweden)

    RODICA CĂPRIŢĂ

    2013-07-01

    Full Text Available During the manufacture of soybean meal a quick control is essential, so that simple and rapid methods, to enable an immediate decision to be made, are of value A simple and rapid method for estimating soybean protein solubility on the basis of changes in the refractive index of dilute potassium hydroxide solution extracts was tested and we found to be highly correlated with the usual protein solubility test in KOH (r = 0.9382. Determination of biophysical parameters instead of chemical indices has two great advantages: the methods are nonpolluting since they don’t use chemical substances, and the methods are very rapid.

  12. Improving Tenoxicam Solubility and Bioavailability by Cosolvent System

    OpenAIRE

    Yeh, Ming-Kung; Chang, Li-Chien; Chiou, Andy Hong-Jey

    2009-01-01

    The formulation study of tenoxicam, a poorly water-soluble drug, was developed by use of a ternary cosolvent system and has significantly enhanced the solubility. Additionally, the relative bioavailability of testing formulation was also evaluated by New Zealand rabbit with a single i.m. injection. The three-phase diagram for dimethylsulfoxide (DMSO)/propylene glycol/water, DMSO/ethanol/water, and DMSO/polyethoxylated castor oil/ethanol system was developed. The volume ratio of 5:4:1 in the D...

  13. Control of Fusion and Solubility in Fusion Systems

    CERN Document Server

    Craven, David A

    2009-01-01

    In this article, we consider the control of fusion in fusion systems, proving three previously known, non-trivial results in a new, largely elementary way. We then reprove a result of Aschbacher, that the product of two strongly closed subgroups is strongly closed; to do this, we consolidate the theory of quotients of fusion systems into a consistent theory. We move on considering p-soluble fusion systems, and prove that they are constrained, allowing us to effectively characterize fusion systems of p-soluble groups. This leads us to recast Thompson Factorization for Qd(p)-free fusion systems, and consider Thompson Factorization for more general fusion systems.

  14. Rocky core solubility in Jupiter and giant exoplanets

    CERN Document Server

    Wilson, Hugh F

    2011-01-01

    Gas giants are believed to form by the accretion of hydrogen-helium gas around an initial protocore of rock and ice. The question of whether the rocky parts of the core dissolve into the fluid H-He layers following formation has significant implications for planetary structure and evolution. Here we use ab initio calculations to study rock solubility in fluid hydrogen, choosing MgO as a representative example of planetary rocky materials, and find MgO to be highly soluble in H for temperatures in excess of approximately 10000 K, implying significant redistribution of rocky core material in Jupiter and larger exoplanets.

  15. Soluble fractalkine in the plasma of fibromyalgia patients

    Directory of Open Access Journals (Sweden)

    JUAN J. GARCIA

    2014-12-01

    Full Text Available Fibromyalgia is a form of non-articular rheumatism in which inflammatory cytokines seem to be involved. However, there is still no analytical specific diagnostic criterion for this disease. The aim was to examine a possible role of fractalkine as a biomarker in fibromyalgia. Plasma levels of soluble fractalkine were compared between women diagnosed with fibromyalgia (n=17 and healthy women (n=10 as controls. Fractalkine released by monocytes was also evaluated. Fibromyalgia patients showed lower plasma fractalkine than healthy women. Since most inflammatory pathologies show elevated plasma levels of soluble fractalkine, the results may contribute towards a differential diagnosis for fibromyalgia.

  16. Evaluating the ready biodegradability of two poorly water-soluble substances: comparative approach of bioavailability improvement methods (BIMs).

    Science.gov (United States)

    Sweetlove, Cyril; Chenèble, Jean-Charles; Barthel, Yves; Boualam, Marc; L'Haridon, Jacques; Thouand, Gérald

    2016-09-01

    Difficulties encountered in estimating the biodegradation of poorly water-soluble substances are often linked to their limited bioavailability to microorganisms. Many original bioavailability improvement methods (BIMs) have been described, but no global approach was proposed for a standardized comparison of these. The latter would be a valuable tool as part of a wider strategy for evaluating poorly water-soluble substances. The purpose of this study was to define an evaluation strategy following the assessment of different BIMs adapted to poorly water-soluble substances with ready biodegradability tests. The study was performed with two poorly water-soluble chemicals-a solid, anthraquinone, and a liquid, isodecyl neopentanoate-and five BIMs were compared to the direct addition method (reference method), i.e., (i) ultrasonic dispersion, (ii) adsorption onto silica gel, (iii) dispersion using an emulsifier, (iv) dispersion with silicone oil, and (v) dispersion with emulsifier and silicone oil. A two-phase evaluation strategy of solid and liquid chemicals was developed involving the selection of the most relevant BIMs for enhancing the biodegradability of tested substances. A description is given of a BIM classification ratio (R BIM), which enables a comparison to be made between the different test chemical sample preparation methods used in the various tests. Thereby, using this comparison, the BIMs giving rise to the greatest biodegradability were ultrasonic dispersion and dispersion with silicone oil or with silicone oil and emulsifier for the tested solid chemical, adsorption onto silica gel, and ultrasonic dispersion for the liquid one.

  17. Using soluble polymers to enforce catalyst-phase-selective solubility and as antileaching agents to facilitate homogeneous catalysis.

    Science.gov (United States)

    Liang, Yannan; Harrell, Mary L; Bergbreiter, David E

    2014-07-28

    The enforced phase-selective solubility of polyisobutylene (PIB)-bound Rh(II) catalysts in biphasic heptane/acetonitrile mixtures can be used not only to recycle these catalysts but also to minimize bimolecular reactions with ethyl diazoacetate. When cyclopropanation and O-H insertion reactions are carried out with PIB-bound Rh(II) catalysts either with or without addition of an unfunctionalized hydrocarbon polymer cosolvent, dimer by-product formation is suppressed even without slow syringe pump addition of the ethyl diazoacetate. This suppression of by-product formation is shown to be due to increased phase segregation of the soluble polymer-bound catalyst and the ethyl diazoacetate reactant. These studies also reveal that added hydrocarbon polymer cosolvents can function as antileaching agents, decreasing the already small amount of a soluble polymer-bound species that leaches into a polar phase in a biphasic mixture during a liquid/liquid separation step.

  18. PLUTONIUM SOLUBILITY IN SIMULATED SAVANNAH RIVER SITE WASTE SOLUTIONS

    Energy Technology Data Exchange (ETDEWEB)

    Rudisill, T.; Hobbs, D.; Edwards, T.

    2010-09-27

    To address the accelerated disposition of the supernate and salt portions of Savannah River Site (SRS) high level waste (HLW), solubility experiments were performed to develop a predictive capability for plutonium (Pu) solubility. A statistically designed experiment was used to measure the solubility of Pu in simulated solutions with salt concentrations and temperatures which bounded those observed in SRS HLW solutions. Constituents of the simulated waste solutions included: hydroxide (OH{sup -}), aluminate (Al(OH){sub 4}{sup -}), sulfate (SO{sub 4}{sup 2-}), carbonate (CO{sub 3}{sup 2-}), nitrate (NO{sub 3}{sup -}), and nitrite (NO{sub 2}{sup -}) anions. Each anion was added to the waste solution in the sodium form. The solubilities were measured at 25 and 80 C. Five sets of samples were analyzed over a six month period and a partial sample set was analyzed after nominally fifteen months of equilibration. No discernable time dependence of the measured Pu concentrations was observed except for two salt solutions equilibrated at 80 C which contained OH{sup -} concentrations >5 mol/L. In these solutions, the Pu solubility increased with time. This observation was attributed to the air oxidation of a portion of the Pu from Pu(IV) to the more soluble Pu(V) or Pu(VI) valence states. A data driven approach was subsequently used to develop a modified response surface model for Pu solubility. Solubility data from this study and historical data from the literature were used to fit the model. The model predicted the Pu solubility of the solutions from this study within the 95% confidence interval for individual predictions and the analysis of variance indicated no statistically significant lack of fit. The Savannah River National Laboratory (SRNL) model was compared with predicted values from the Aqueous Electrolyte (AQ) model developed by OLI Systems, Inc. and a solubility prediction equation developed by Delegard and Gallagher for Hanford tank waste. The agreement between

  19. PLUTONIUM SOLUBILITY IN HIGH-LEVEL WASTE ALKALI BOROSILICATE GLASS

    Energy Technology Data Exchange (ETDEWEB)

    Marra, J.; Crawford, C.; Fox, K.; Bibler, N.

    2011-01-04

    The solubility of plutonium in a Sludge Batch 6 (SB6) reference glass and the effect of incorporation of Pu in the glass on specific glass properties were evaluated. A Pu loading of 1 wt % in glass was studied. Prior to actual plutonium glass testing, surrogate testing (using Hf as a surrogate for Pu) was conducted to evaluate the homogeneity of significant quantities of Hf (Pu) in the glass, determine the most appropriate methods to evaluate homogeneity for Pu glass testing, and to evaluate the impact of Hf loading in the glass on select glass properties. Surrogate testing was conducted using Hf to represent between 0 and 1 wt % Pu in glass on an equivalent molar basis. A Pu loading of 1 wt % in glass translated to {approx}18 kg Pu per Defense Waste Processing Facility (DWPF) canister, or about 10X the current allowed limit per the Waste Acceptance Product Specifications (2500 g/m{sup 3} of glass or about 1700 g/canister) and about 30X the current allowable concentration based on the fissile material concentration limit referenced in the Yucca Mountain Project License Application (897 g/m{sup 3}3 of glass or about 600 g Pu/canister). Based on historical process throughput data, this level was considered to represent a reasonable upper bound for Pu loading based on the ability to provide Pu containing feed to the DWPF. The task elements included evaluating the distribution of Pu in the glass (e.g. homogeneity), evaluating crystallization within the glass, evaluating select glass properties (with surrogates), and evaluating durability using the Product Consistency Test -- Method A (PCT-A). The behavior of Pu in the melter was evaluated using paper studies and corresponding analyses of DWPF melter pour samples.The results of the testing indicated that at 1 wt % Pu in the glass, the Pu was homogeneously distributed and did not result in any formation of plutonium-containing crystalline phases as long as the glass was prepared under 'well-mixed' conditions

  20. Production of a human single-chain variable fragment antibody against esophageal carcinoma

    Institute of Scientific and Technical Information of China (English)

    Ming-Yan Xu; Xiao-Hu Xu; Geng-Zhen Chen; Xiao-Ling Deng; Jonathan Li; Xiao-Jun Yu; Mei-Zhen Chen

    2004-01-01

    AIM: To construct a phage display library of human singlechain variable fragment (scFv) antibodies associated with esophageal cancer and to preliminarily screen a scFv antibody against esophageal cancer.METHODS: Total RNA extracted from metastatic lymph nodes of esophageal cancer patients was used to construct a scFv gene library. Rescued by M13K07 helper phage, the scFv phage display library was constructed. esophageal cancer cell line Eca 109 and normal human esophageal epithelial cell line (NHEEC) were used for panning and subtractive panning of the scFv phage display library to obtain positive phage clones. Soluble scFv was expressed in E.coli HB2151 which was transfected with the positive phage clone, then purified by affinity chromatography.Relative molecular mass of soluble scFv was estimated by Western blotting, its bioactivity was detected by cell ELISA assay. Sequence of scFv was determined using the method of dideoxynucleotide sequencing.RESULTS: The size of scFv gene library was approximately 9×106 clones. After four rounds of panning with Eca109 and three rounds of subtractive panning with NHEEC cells, 25 positive phage clones were obtained. Soluble scFv was found to have a molecular mass of 31 ku and was able to bind to Eca109 cells, but not to HeLa and NHEEC cells. Variable heavy (VH) gene from one of the positive clones was shown to be derived from the γ chain subgroup Ⅳ of immunoglobulin, and variable light (VL) gene from the κchain subgroup I of immunoglobulin.CONCLUSION: A human scFv phage display library can be constructed from the metastatic lymph nodes of esophageal cancer patients. A whole human scFv against esophageal cancer shows some bioactivity.

  1. Phosphoryl choline-grafted water-soluble carbon nanotube

    Institute of Scientific and Technical Information of China (English)

    Tao Zhang; Kai Xi; Min Gu; Zheng Sheng Jiang

    2008-01-01

    Water-soluble property is the precondition of biomedical evaluation and application of carbon nanotube (CNT). Novel watersoluble CNT was synthesized in this letter by grafting phosphoryi choline (PC) onto multi-wall CNTs. Utilizing FTIR, XPS, TGAand TEM, the title CNTs were characterized and it was found that the target products could facilely dissolve in water.

  2. Substituted polyfluorene-based hole transport layer with tunable solubility

    NARCIS (Netherlands)

    Craciun, N.I.; Wildeman, J.; Blom, P.W.M.

    2010-01-01

    We report on the synthesis and electrical characterization of polyfluorene-triarylamine-based hole transport layers (HTLs). The solubility of the HTL can be tuned by adjustment of the chemical structure without loss of the charge transport properties. Double-layer polymer light-emitting diodes are c

  3. Substituted Polyfluorene-Based Hole Transport Layer with Tunable Solubility

    NARCIS (Netherlands)

    Craciun, N. I.; Wildeman, J.; Blom, P. W. M.

    2010-01-01

    We report on the synthesis and electrical characterization of polyfluorene-triarylamine-based hole transport layers (HTLs). The solubility of the HTL can be tuned by adjustment of the chemical structure without loss of the charge transport properties. Double-layer polymer light-emitting diodes are c

  4. Soluble CD40 ligand in acute coronary syndromes

    NARCIS (Netherlands)

    C. Heeschen (Christopher); S. Dimmeler (Stefanie); C.W. Hamm (Christian); A.M. Zeiher (Andreas); M.L. Simoons (Maarten); M.J.B.M. van den Brand (Marcel); H. Boersma (Eric)

    2003-01-01

    textabstractBACKGROUND: CD40 ligand is expressed on platelets and released from them on activation. We investigated the predictive value of soluble CD40 ligand as a marker for clinical outcome and the therapeutic effect of glycoprotein IIb/IIIa receptor inhibition in patients with acute coronary syn

  5. Solubility of carbon dioxide in aqueous piperazine solutions

    NARCIS (Netherlands)

    Derks, P. W. J.; Dijkstra, H. B. S.; Hogendoorn, J. A.; Versteeg, G. F.

    2005-01-01

    In the present work, new experimental data are presented on the solubility of carbon dioxide in aqueous piperazine solutions, for concentrations of 0.2 and 0.6 molar piperazine and temperatures of 25, 40, and 70°C respectively. The present data, and other data available in the literature, were corr

  6. Solubilities of ferrocene and acetylferrocene in supercritical carbon dioxide

    DEFF Research Database (Denmark)

    Kazemi, Somayeh; Belandria, Veronica; Janssen, Nico

    2012-01-01

    In this work, the solubilities of ferrocene and acetylferrocene in supercritical carbon dioxide (scCO2) were measured using an analytical method in a quasi-flow apparatus. High-performance liquid chromatography was applied through an online sampling procedure to determine the concentration...

  7. On a Class of p-Soluble Groups

    Institute of Scientific and Technical Information of China (English)

    A. Ballester-Bolinches; R. Esteban-Romero; M.C. Pedraza-Aguilera

    2005-01-01

    Let p be a prime. The class of all p-soluble groups G such that every p-chief factor of G is cyclic and all p-chief factors of G are G-isomorphic is studied in this paper.Some results on T-, PT-, and PST-groups are also obtained.

  8. Solubility of nonelectrolytes: a first-principles computational approach.

    Science.gov (United States)

    Jackson, Nicholas E; Chen, Lin X; Ratner, Mark A

    2014-05-15

    Using a combination of classical molecular dynamics and symmetry adapted intermolecular perturbation theory, we develop a high-accuracy computational method for examining the solubility energetics of nonelectrolytes. This approach is used to accurately compute the cohesive energy density and Hildebrand solubility parameters of 26 molecular liquids. The energy decomposition of symmetry adapted perturbation theory is then utilized to develop multicomponent Hansen-like solubility parameters. These parameters are shown to reproduce the solvent categorizations (nonpolar, polar aprotic, or polar protic) of all molecular liquids studied while lending quantitative rigor to these qualitative categorizations via the introduction of simple, easily computable parameters. Notably, we find that by monitoring the first-order exchange energy contribution to the total interaction energy, one can rigorously determine the hydrogen bonding character of a molecular liquid. Finally, this method is applied to compute explicitly the Flory interaction parameter and the free energy of mixing for two different small molecule mixtures, reproducing the known miscibilities. This methodology represents an important step toward the prediction of molecular solubility from first principles.

  9. Application of the Hansen solubility Parameters theory to carbon nanotubes.

    Science.gov (United States)

    Detriche, S; Zorzini, G; Colomer, J F; Fonseca, A; Nagy, J B

    2008-11-01

    Carbon nanotubes (CNT) are very promising nano-objects due to their exceptional properties. However, their tendency to form bundles as well as their insolubility in common solvents makes them difficult to handle. The main way to solve the problem is chemical or physical CNTs functionalisations, with all the problems inherent to the methods. In this contribution, we present a new approach that allows predicting the solubility of carbon nanotubes in many solvents but also predicting the most appropriate solvents to use for given samples of CNTs. Solubilisation and dispersion being directly connected, the present approach of solubilisation proves also to be efficient in dispersing the CNTs bundles. This contribution is a first step toward the control of carbon nanotube's dispersion in polymers and their homogenous functionalisation. Moreover, we also report here a new method, based on solvents, to separate carbon nanotubes by size, the use of mixture of non-solvents in order to obtain good solvents and the use of mixture of good solvents to obtain higher solubility. The use of mixture of good solvents allowed us to obtain high solubility, up to three times higher then that reported in literature. We have also measured and analysed the solubility of some functionalised carbon nanotubes.

  10. Water-soluble constituents of cumin: monoterpenoid glucosides.

    Science.gov (United States)

    Ishikawa, Toru; Takayanagi, Tomomi; Kitajima, Junichi

    2002-11-01

    From the water-soluble portion of the methanol extract of cumin (fruit of Cuminum cyminum L.), which has been used as a spice and medicine since antiquity, sixteen monoterpenoid glucosides, including twelve new compounds, were isolated. Their structures were clarified by spectral investigation.

  11. Efficient and Convenient Preparation of Water-Soluble Fullerenol

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jian-Min章建民; YANG Wen杨文; HE Ping何萍; ZHU Shi-Zheng朱士正

    2004-01-01

    An efficient and convenient preparation of fullerenols was described. With polyethylene glycol (PEG) 400 as catalyst, fullerenols were conveniently synthesized via the direct reaction of fullerene with aqueous NaOH. By control of reaction conditions, either water-soluble C60 fullerenol or water-insoluble C60 fullerenol could be obtained selectively.

  12. Urinary Soluble CD163 in Active Renal Vasculitis

    NARCIS (Netherlands)

    O'Reilly, Vincent P.; Wong, Limy; Kennedy, Claire; Elliott, Louise A.; O'Meachair, Shane; Coughlan, Alice Marie; O'Brien, Eoin C.; Ryan, Michelle M.; Sandoval, Diego; Connolly, Emma; Dekkema, Gerjan J.; Lau, Jiaying; Abdulahad, Wayel H.; Heeringa, Peter; Buckley, Colm; O'Brien, Cathal; Finn, Stephen; Cohen, Clemens D.; Lindemeyer, Maja T.; Hickey, Fionnuala B.; O'Hara, Paul V.; Feighery, Conleth; Moran, Sarah M.; Mellotte, George; Clarkson, Michael R.; Dorman, Anthony J.; Murray, Patrick T.; Little, Mark A.; Sanders, Johannes

    2016-01-01

    A specific biomarker that can separate active renal vasculitis from other causes of renal dysfunction is lacking, with a kidney biopsy often being required. Soluble CD163 (sCD163), shed by monocytes and macrophages, has been reported as a potential biomarker in diseases associated with excessive mac

  13. Water-soluble diphosphadiazacyclooctanes as ligands for aqueous organometallic catalysis

    KAUST Repository

    Boulanger, Jérôme

    2012-12-01

    Two new water-soluble diphosphacyclooctanes been synthesized and characterized by NMR and surface tension measurements. Both phosphanes proved to coordinate rhodium in a very selective way as well-defined bidentates were obtained. When used in Rh-catalyzed hydroformylation of terminal alkenes, both ligands positively impacted the reaction chemoselectivity. © 2012 Elsevier B.V.

  14. Rapid solubility and mineral storage of CO2 in basalt

    DEFF Research Database (Denmark)

    Gislason, Sigurdur R.; Broecker, W.S.; Gunnlaugsson, E.

    2014-01-01

    rich in divalent metal cations such as basalts and ultra-mafic rocks. We have demonstrated the dissolution of CO2 into water during its injection into basalt leading to its geologic solubility storage in less than five minutes and potential geologic mineral storage within few years after injection [1...

  15. Hansen solubility parameters for a carbon fiber/epoxy composite

    DEFF Research Database (Denmark)

    Launay, Helene; Hansen, Charles M.; Almdal, Kristoffer

    2007-01-01

    In this study, the physical affinity between an epoxy matrix and oxidized, unsized carbon fibers has been evaluated using Hansen solubility (cohesion) parameters (HSP). A strong physical compatibility has been shown, since their respective HSP are close. The use of a glassy carbon substrate...

  16. A Soluble, Folded Protein without Charged Amino Acid Residues

    DEFF Research Database (Denmark)

    Højgaard, Casper; Kofoed, Christian; Espersen, Roall;

    2016-01-01

    Charges are considered an integral part of protein structure and function, enhancing solubility and providing specificity in molecular interactions. We wished to investigate whether charged amino acids are indeed required for protein biogenesis and whether a protein completely free of titratable ...

  17. Optimization of translation profiles enhances protein expression and solubility.

    Directory of Open Access Journals (Sweden)

    Anne-Katrin Hess

    Full Text Available mRNA is translated with a non-uniform speed that actively coordinates co-translational folding of protein domains. Using structure-based homology we identified the structural domains in epoxide hydrolases (EHs and introduced slow-translating codons to delineate the translation of single domains. These changes in translation speed dramatically improved the solubility of two EHs of metagenomic origin in Escherichia coli. Conversely, the importance of transient attenuation for the folding, and consequently solubility, of EH was evidenced with a member of the EH family from Agrobacterium radiobacter, which partitions in the soluble fraction when expressed in E. coli. Synonymous substitutions of codons shaping the slow-transiting regions to fast-translating codons render this protein insoluble. Furthermore, we show that low protein yield can be enhanced by decreasing the free folding energy of the initial 5'-coding region, which can disrupt mRNA secondary structure and enhance ribosomal loading. This study provides direct experimental evidence that mRNA is not a mere messenger for translation of codons into amino acids but bears an additional layer of information for folding, solubility and expression level of the encoded protein. Furthermore, it provides a general frame on how to modulate and fine-tune gene expression of a target protein.

  18. Soluble Eggshell Mebrane Protein:Antibacterial Property and Biodegradability

    Institute of Scientific and Technical Information of China (English)

    YI Feng; YU Jian; LI Qiang; GUO Zhaoxia

    2007-01-01

    The antibacterial property and biodegradability of soluble eggshell membrane protein (SEP)are reported. Unlike the natural eggshell membrane (ESM), SEP does not possess antibacterial property against E.coli. The biodegradation tests with trypsin show that both ESM and SEP are biodegradable.

  19. Le Chatelier's Principle and the Prediction Temperature on Solubilities.

    Science.gov (United States)

    Fernandez-Prini, R.

    1982-01-01

    Discusses Le Chatelier's Principle from a thermodynamic perspective and applies it to the effect of temperature on the solubility of gases in liquids. Rationale of this discussion is to evaluate data in a previous article claimed to be contradictory to the Principle. (Author/JN)

  20. Soluble fiber polysaccharides: effects on plasma cholesterol and colonic fermentation.

    Science.gov (United States)

    Topping, D L

    1991-07-01

    Many soluble-fiber polysaccharides, used as stabilizers and thickeners by the food industry, lower plasma cholesterol and slow small intestinal transit and nutrient absorption. Although nondigestible by human enzymes, these polysaccharides are fermented by the large-bowel microflora, yielding short-chain fatty acids that are absorbed and contribute to energy. The caloric yield from fiber polysaccharides needs to be quantified. Short-chain fatty acid production from soluble fibers is modified by the presence of insoluble fibers but, in total, is probably less than from other carbohydrates, e.g., resistant starch. Short-chain fatty acids do not seem to mediate effects of fiber on plasma cholesterol, but in the large bowel they exert the trophic and antineoplastic effects of dietary fiber. The mechanism for cholesterol reduction by soluble fibers relates to enhanced steroid excretion and altered fat absorption and may be a function of the viscosity of these fibers in solution. The relationships between the chemical structure of soluble polysaccharides and their documented physiologic effects are not yet clear. By using polysaccharides of defined structure and properties, it should be possible to identify those characteristics that predict physiologic actions.

  1. Emulsion properties of algae soluble protein isolate from Tetraselmis sp.

    NARCIS (Netherlands)

    Schwenzfeier, A.; Helbig, A.; Wierenga, P.A.; Gruppen, H.

    2013-01-01

    To study possible applications of microalgae proteins in foods, a colourless, protein-rich fraction was isolated from Tetraselmis sp. In the present study the emulsion properties of this algae soluble protein isolate (ASPI) were investigated. Droplet size and droplet aggregation of ASPI stabilized o

  2. The anaerobic treatment of low strength soluble wastewaters.

    NARCIS (Netherlands)

    Kato, M.T.

    1994-01-01

    Low strength soluble wastewaters with chemical oxygen demand (COD) of less than 2000 mg/I are mostly from food processing industries. They commonly contain simple substrates such as short- chain fatty acids, alcohols and carbohydrates. The application of anaerobic technology has been mostly directed

  3. Soluble guanylate cyclase : a potential therapeutic target for heart failure

    NARCIS (Netherlands)

    Gheorghiade, Mihai; Marti, Catherine N.; Sabbah, Hani N.; Roessig, Lothar; Greene, Stephen J.; Boehm, Michael; Burnett, John C.; Campia, Umberto; Cleland, John G. F.; Collins, Sean P.; Fonarow, Gregg C.; Levy, Phillip D.; Metra, Marco; Pitt, Bertram; Ponikowski, Piotr; Sato, Naoki; Voors, Adriaan A.; Stasch, Johannes-Peter; Butler, Javed

    2013-01-01

    The number of annual hospitalizations for heart failure (HF) and the mortality rates among patients hospitalized for HF remains unacceptably high. The search continues for safe and effective agents that improve outcomes when added to standard therapy. The nitric oxide (NO)-soluble guanylate cyclase

  4. Glycan-dependent immunogenicity of recombinant soluble trimeric hemagglutinin

    NARCIS (Netherlands)

    Vries, de R.P.; Smit, C.H.; Bruin, de E.; Rigter, A.; Vries, de E.; Cornelissen, A.H.M.; Eggink, D.; Chung, N.P.Y.; Moore, J.P.; Sanders, R.W.; Hokke, C.H.; Koopmans, M.P.G.; Rottier, P.J.M.; Haan, de C.A.M.

    2012-01-01

    Recombinant soluble trimeric influenza A virus (IAV) hemagglutinin (sHA3) has proven an effective vaccine antigen against IAV. Here, we investigate to what extent the glycosylation status of the sHA3 glycoprotein affects its immunogenicity. Different glycosylation forms of subtype H5 trimeric HA pro

  5. Solubility determination from clear points upon solvent addition

    NARCIS (Netherlands)

    Reus, M.A.; Heijden, A.E.D.M. van der; Horst, J.H. ter

    2015-01-01

    A method is described for determining the solubility of multicomponent crystalline compounds from clear points upon sample dilution at a constant temperature. Clear points are established by continuously adding a solvent mixture to a suspension of known composition until a clear solution appears. Fo

  6. Optimization of translation profiles enhances protein expression and solubility.

    Science.gov (United States)

    Hess, Anne-Katrin; Saffert, Paul; Liebeton, Klaus; Ignatova, Zoya

    2015-01-01

    mRNA is translated with a non-uniform speed that actively coordinates co-translational folding of protein domains. Using structure-based homology we identified the structural domains in epoxide hydrolases (EHs) and introduced slow-translating codons to delineate the translation of single domains. These changes in translation speed dramatically improved the solubility of two EHs of metagenomic origin in Escherichia coli. Conversely, the importance of transient attenuation for the folding, and consequently solubility, of EH was evidenced with a member of the EH family from Agrobacterium radiobacter, which partitions in the soluble fraction when expressed in E. coli. Synonymous substitutions of codons shaping the slow-transiting regions to fast-translating codons render this protein insoluble. Furthermore, we show that low protein yield can be enhanced by decreasing the free folding energy of the initial 5'-coding region, which can disrupt mRNA secondary structure and enhance ribosomal loading. This study provides direct experimental evidence that mRNA is not a mere messenger for translation of codons into amino acids but bears an additional layer of information for folding, solubility and expression level of the encoded protein. Furthermore, it provides a general frame on how to modulate and fine-tune gene expression of a target protein.

  7. Predictions of Actinide Solubilities under Near-Field Conditions Expected in the WIPP

    Science.gov (United States)

    Brush, L. H.; Xiong, Y.

    2009-12-01

    The Waste Isolation Pilot Plant (WIPP) is a U.S. Department of Energy (DOE) repository in southeast New Mexico for defense-related transuranic (TRU) waste. The repository, which opened in March 1999, is located at a subsurface depth of 655 m (2150 ft) in the Salado Fm., a Permian bedded-salt formation. The repository will eventually contain the equivalent of 844,000 208 L (55 gal) drums of TRU waste. After filling the rooms and access drifts and installing panel closures, creep closure of the salt will crush the steel waste containers in most cases and encapsulate the waste. The WIPP actinide source term model used for long-term performance assessment (PA) of the repository comprises dissolved and suspended submodels (solubilities and colloids). This presentation will describe the solubilities. From the standpoint of long-term PA, the order of importance of the radioelements in the TRU waste to be emplaced in the WIPP is Pu ~ Am >> U > Th >> Np ~ Cm and fission products. The DOE has included all of these actinides, but not fission products, in the WIPP Actinide Source Term Program (ASTP). Anoxic corrosion of Fe- and Al-base metals and microbial consumption of cellulosic, plastic, and rubber materials will produce gas and create strongly reducing conditions in the WIPP after closure. The use of MgO as an engineered barrier to consume microbially produced CO2 will result in low fCO2 and basic pH. Under these conditions, Th, U, Np, Pu, and Am will speciate essentially entirely as Th(IV), U(IV), Np(IV), Pu(III), and Am(III); or Th(IV), U(VI), Np(V), Pu(IV), and Am(III). The DOE has developed thermodynamic speciation-and-solubility models for +III, +IV, and +V actinides in brines. Experimental data for Nd, Am, and Cm species were used to parameterize the +III Pitzer activity-coefficient model; data for Th species were used for the +IV model; and data for Np(V) species were used for the +V model. These models include the effects of the organic ligands acetate, citrate

  8. Evaluating the mutagenicity of the water-soluble fraction of air particulate matter: A comparison of two extraction strategies.

    Science.gov (United States)

    Palacio, Isabel C; Oliveira, Ivo F; Franklin, Robson L; Barros, Silvia B M; Roubicek, Deborah A

    2016-09-01

    Many studies have focused on assessing the genotoxic potential of the organic fraction of airborne particulate matter. However, the determination of water-soluble compounds, and the evaluation of the toxic effects of these elements can also provide valuable information for the development of novel strategies to control atmospheric air pollution. To determine an appropriate extraction method for assessing the mutagenicity of the water-soluble fraction of PM, we performed microwave assisted (MW) and ultrasonic bath (US) extractions, using water as solvent, in eight different air samples (TSP and PM10). Mutagenicity and extraction performances were evaluated using the Salmonella/microsome assay with strains TA98 and TA100, followed by chemical determination of water-soluble metals. Additionally, we evaluated the chemical and biological stability of the extracts testing their mutagenic potential and chemically determining elements present in the samples along several periods after extraction. Reference material SRM 1648a was used. The comparison of MW and US extractions did not show differences on the metals concentrations, however positive mutagenic responses were detected with TA98 strain in all samples extracted using the MW method, but not with the US bath extraction. The recovery, using reference material was better in samples extracted with MW. We concluded that the MW extraction is more efficient to assess the mutagenic activity of the soluble fraction of airborne PM. We also observed that the extract freezing and storage over 60 days has a significant effect on the mutagenic and analytical results on PM samples, and should be avoided.

  9. Grazing behaviour, intake, rumen function and milk production of dairy cows offered Lolium perenne containing different levels of water-soluble carbohydrates

    NARCIS (Netherlands)

    Taweel, H.Z.; Tas, B.M.; Smit, H.J.; Elgersma, A.; Dijkstra, J.; Tamminga, S.

    2006-01-01

    The aim of this study was to assess grazing behaviour, intake, rumen function, milk production and composition of dairy cows grazing perennial ryegrass varieties that were morphologically and chemically similar, but differed in their water-soluble carbohydrate (WSC) concentration. Eight multiparous

  10. Temperature and curing time affect composite sorption and solubility

    Directory of Open Access Journals (Sweden)

    Fabrício Luscino Alves de Castro

    2013-04-01

    Full Text Available Objective: This study evaluated the effect of temperature and curing time on composite sorption and solubility. Material and Methods: Seventy five specimens (8×2 mm were prepared using a commercial composite resin (ICE, SDI. Three temperatures (10°C, 25°C and 60°C and five curing times (5 s, 10 s, 20 s, 40 s and 60 s were evaluated. The specimens were weighed on an analytical balance three times: A: before storage (M1; B: 7 days after storage (M2; C: 7 days after storage plus 1 day of drying (M3. The storage solution consisted of 75% alcohol/25% water. Sorption and solubility were calculated using these three weights and specimen dimensions. The data were analyzed using the Kruskal-Wallis and Mann-Whitney U Tests (α=5%. Results: The results showed that time, temperature and their interaction influenced the sorption and solubility of the composite (p0.05. The 60°C composite temperature led to lower values of sorption for all curing times when compared with the 10°C temperature (p0.05. Solubility was similar at 40 s and 60 s for all temperatures (p>0.05, but was higher at 10°C than at 60°C for all curing times (p0.05. Conclusions: In conclusion, higher temperatures or longer curing times led to lower sorption and solubility values for the composite tested; however, this trend was only significant in specific combinations of temperature and curing times.

  11. Tuning solubility and stability of hydrochlorothiazide co-crystals.

    Science.gov (United States)

    Sanphui, Palash; Rajput, Lalit

    2014-02-01

    Hydrochlorothiazide (HCT), C7H8ClN3O4S2, is a diuretic BCS (Biopharmaceutics Classification System) class IV drug which has primary and secondary sulfonamide groups. To modify the aqueous solubility of the drug, co-crystals with biologically safe co-formers were screened. Multi-component molecular crystals of HCT were prepared with nicotinic acid, nicotinamide, succinamide, p-aminobenzoic acid, resorcinol and pyrogallol using liquid-assisted grinding. The co-crystals were characterized by FT-IR spectroscopy, powder X-ray diffraction (PXRD) and differential scanning calorimetry. Single crystal structures were obtained for four of them. The N-H...O sulfonamide catemer synthons found in the stable polymorph of pure HCT are replaced in the co-crystals by drug-co-former heterosynthons. Isostructural co-crystals with nicotinic acid and nicotinamide are devoid of the common sulfonamide dimer/catemer synthons. Solubility and stability experiments were carried out for the co-crystals in water (neutral pH) under ambient conditions. Among the six binary systems, the co-crystal with p-aminobenzoic acid showed a sixfold increase in solubility compared with pure HCT, and stability up to 24 h in an aqueous medium. The co-crystals with nicotinamide, resorcinol and pyrogallol showed only a 1.5-2-fold increase in solubility and transformed to HCT within 1 h of the dissolution experiment. An inverse correlation is observed between the melting points of the co-crystals and their solubilities.

  12. Neutral detergent-soluble fiber improves gut barrier function in twenty-five-day-old weaned rabbits.

    Science.gov (United States)

    Gómez-Conde, M S; García, J; Chamorro, S; Eiras, P; Rebollar, P G; Pérez de Rozas, A; Badiola, I; de Blas, C; Carabaño, R

    2007-12-01

    The effect of neutral detergent-soluble fiber level on gut barrier function and intestinal microbiota was examined in weaned rabbits. A control diet (AH) containing 103 g of neutral detergent-soluble fiber/ kg of DM included alfalfa hay as main source of fiber. Another diet (B-AP) was formulated by replacing half of the alfalfa hay with a mixture of beet and apple pulp resulting in 131 g of soluble fiber/kg of DM. A third diet (OH) was obtained by substituting half of the alfalfa hay with a mix of oat hulls and a soybean protein concentrate and contained 79 g of soluble fiber/kg of DM. Rabbits weaned at 25 d and slaughtered at 35 d were used to determine ileal digestibility, jejunal morphology, sucrase activity, lamina propria lymphocytes, and intestinal microbiota. Suckling 35-d-old rabbits were used to assess mucosa morphology. Mortality (from weaning to 63 d of age) was also determined. Villous height of the jejunal mucosa increased with soluble fiber (P = 0.001). Rabbits fed with the greatest level of soluble fiber (BA-P diet) showed the highest villous height/ crypt depth ratio (8.14; P = 0.001), sucrase specific activity (8,671 mumol of glucose/g of protein; P = 0.019), and the greatest ileal starch digestibility (96.8%; P = 0.002). The opposite effects were observed in rabbits fed decreased levels of soluble fiber (AH and OH diets; 4.70, 5,848 mumol of glucose/g of protein, as average, respectively). The lowest ileal starch digestibility was detected for animals fed OH diet (93.2%). Suckling rabbits of the same age showed a lower villous height/crypt depth ratio (6.70) compared with the B-AP diet group, but this ratio was higher than the AH or OH diet groups. Lower levels of soluble fiber tended (P = 0.074) to increase the cellular immune response (CD8+ lymphocytes). Diet affected IL-2 production (CD25+, P = 0.029; CD5+CD25+, P = 0.057), with no clear relationship between soluble fiber and IL-2. The intestinal microbiota biodiversity was not affected by

  13. Plant-available and water-soluble phosphorus in soils amended with separated manure solids.

    Science.gov (United States)

    Gasser, M-O; Chantigny, M H; Angers, D A; Bittman, S; Buckley, K E; Rochette, P; Massé, D

    2012-01-01

    Physical, chemical, or biological treatment of animal liquid manure generally produces a dry-matter rich fraction (DMF) that contains most of the initial phosphorus (P). Our objective was to assess the solubility and plant availability of P from various DMFs as a function of soil P status. Eight different DMFs were obtained from liquid swine (LSM) and dairy cattle (LDC) manures treated by natural decantation, anaerobic digestion, chemical flocculation, composting, or mechanical separation. The DMFs were compared with mineral P fertilizer in a pot experiment with oat ( L.) grown in four soils with varied P-fixing capacities and P saturation levels. The DMFs were added at a rate of 50 mg P kg soil and incubated 14 d before seeding. Soil water-extractable P (P) at all water:soil extraction ratios (2:1, 20:1, and 200:1) was slightly higher when DMFs were derived from LDC rather than LSM. Soil P at the 2:1 ratio was lower with anaerobically digested LSM. At the 2:1 extraction ratio, DMF P was less soluble than mineral P as P saturation in soils increased. In soils with a lower P-fixing capacity, DMF P appeared less water soluble than mineral P under 20:1 and 200:1 extraction ratios. After 72 d of plant growth, DMFs produced yields comparable to mineral P fertilizer. Although the plant availability of P from DMFs was comparable to mineral P fertilizer, P from DMFs could be less vulnerable to leaching or runoff losses in soils with a high P saturation level or low P-fixing capacity.

  14. Water-soluble chelating polymers for removal of actinides from wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Jarvinen, G.D. [Los Alamos National Lab., NM (United States)

    1997-10-01

    Polymer filtration is a technology under development to selectively recover valuable or regulated metal ions from process or wastewaters. The technology uses water-soluble chelating polymers that are designed to selectively bind with metal ions in aqueous solutions. The polymers have a sufficiently large molecular weight that they can be separated and concentrated using available ultrafiltration (UF) technology. The UF range is generally considered to include molecular weights from about 3000 to several million daltons and particles sizes of about 2 to 1000 nm. Water and smaller unbound components of the solution pass freely through the UF membrane. The polymers can then be reused by changing the solution conditions to release the metal ions that are recovered in concentrated form for recycle or disposal. Some of the advantages of polymer filtration relative to technology now in use are rapid binding kinetics, high selectivity, low energy and capital costs, and a small equipment footprint. Some potential commercial applications include electroplating rinse waters, photographic processing, nuclear power plant cooling water; remediation of contaminated soils and groundwater; removal of mercury contamination; and textile, paint and dye production. The purpose of this project is to evaluate this technology to remove plutonium, americium, and other regulated metal ions from various process and waste streams found in nuclear facilities. The work involves preparation of the water-soluble chelating polymers; small-scale testing of the chelating polymer systems for the required solubility, UF properties, selectivity and binding constants; followed by an engineering assessment at a larger scale to allow comparison to competing separation technologies. This project focuses on metal-ion contaminants in waste streams at the Plutonium Facility and the Waste Treatment Facility at LANL. Potential applications at other DOE facilities are also apparent.

  15. Doping in the Valley of Hydrogen Solubility: A Route to Designing Hydrogen-Resistant Zirconium Alloys

    Science.gov (United States)

    Youssef, Mostafa; Yang, Ming; Yildiz, Bilge

    2016-01-01

    Hydrogen pickup and embrittlement pose a challenging safety limit for structural alloys used in a wide range of infrastructure applications, including zirconium alloys in nuclear reactors. Previous experimental observations guide the empirical design of hydrogen-resistant zirconium alloys, but the underlying mechanisms remain undecipherable. Here, we assess two critical prongs of hydrogen pickup through the ZrO2 passive film that serves as a surface barrier of zirconium alloys; the solubility of hydrogen in it—a detrimental process—and the ease of H2 gas evolution from its surface—a desirable process. By combining statistical thermodynamics and density-functional-theory calculations, we show that hydrogen solubility in ZrO2 exhibits a valley shape as a function of the chemical potential of electrons, μe . Here, μe , which is tunable by doping, serves as a physical descriptor of hydrogen resistance based on the electronic structure of ZrO2 . For designing zirconium alloys resistant against hydrogen pickup, we target either a dopant that thermodynamically minimizes the solubility of hydrogen in ZrO2 at the bottom of this valley (such as Cr) or a dopant that maximizes μe and kinetically accelerates proton reduction and H2 evolution at the surface of ZrO2 (such as Nb, Ta, Mo, W, or P). Maximizing μe also promotes the predomination of a less-mobile form of hydrogen defect, which can reduce the flux of hydrogen uptake. The analysis presented here for the case of ZrO2 passive film on Zr alloys serves as a broadly applicable and physically informed framework to uncover doping strategies to mitigate hydrogen embrittlement also in other alloys, such as austenitic steels or nickel alloys, which absorb hydrogen through their surface oxide films.

  16. Potent Systemic Anticancer Activity of Adenovirally Expressed EGFR-Selective TRAIL Fusion Protein

    NARCIS (Netherlands)

    Bremer, Edwin; van Dam, Gooitzen M.; de Bruyn, Marco; van Riezen, Manon; Dijkstra, Marike; Kamps, Gera; Helfrich, Wijnand; Haisma, Hidde

    2008-01-01

    Previously, we demonstrated potent tumor cell-selective pro-apoptotic activity of scFv425:sTRAIL, a recombinant fusion protein comprised of EGFR-directed antibody fragment (scFv425) genetically fused to human soluble TNF-related apoptosis-inducing ligand (sTRAIL). Here, we report on the promising th

  17. SOME FACTORS' EFFECTS ON THE SOLUBILITY OF PROTEIN FROM YELLOW MEALWORM ( TENEBRIO MOLITOR L) LARVAE

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Studies were conducted to investigate the effects of pH value, extraction time, extraction temper- ature, ratio of material to extraction medium and salt concentration on the solubility of yellow mealworm larvae protein, Tne results showed that pH value greatly influenced the solubility, minimum solubility was found at pH 5.8 and a maximum at pH 10 - 12. Salt ion could increase the solubility at the iso-electric point pH and slightly decreased the solubility at the pH value higher than that of the iso-electric point. Other factors did not significantly affect the solubility of the protein.

  18. Predicting the solubility of sulfamethoxypyridazine in individual solvents. II: Relationship between solute-solvent interaction terms and partial solubility parameters.

    Science.gov (United States)

    Martin, A; Bustamante, P; Escalera, B; Sellés, E

    1989-08-01

    In the first paper in the series, an expanded system of parameters was devised to account for orientation and induction effects, and the term Wh was introduced to replace delta 1h delta 2h of the extended Hansen solubility approach. In the present report, a new term, Kh = Wh/delta 1h delta 2h is observed to take on values larger or smaller than unity depending on whether the hydrogen bonded solute-solvent interaction is larger or smaller than predicted by the term delta 1h delta 2h. The acidic delta a and basic delta b solubility parameters are used to represent two parameters, sigma and tau, suggested by Small in his study of proton donor-acceptor properties. The Small equation, including a heat of mixing term for hydrogen bonded species, is shown to be capable of semiquantitative evaluation. A partial molar heat delta H2h of hydrogen bonding is calculated using delta h and Wh terms; delta H2h is found to be correlated with the logarithm of the residual activity coefficient, In alpha R, a term representing strong solute-solvent interaction. The terms Wh, delta H2h, and In alpha 2R may be used to test the deviation from the geometric mean assumed in regular solution theory, and to replace the hydrogen bonding terms of the extended Hansen three-parameter model. The solubility of sulfamethoxypyridazine in 30 solvents is used to test the semiempirical solubility equations. The results are interpreted in terms of partial solubility parameters and the proton donor-acceptor properties of the solvents.

  19. Selection of excipients for melt extrusion with two poorly water-soluble drugs by solubility parameter calculation and thermal analysis.

    Science.gov (United States)

    Forster, A; Hempenstall, J; Tucker, I; Rades, T

    2001-09-11

    The aim of this study was to determine the miscibility of drug and excipient to predict if glass solutions are likely to form when drug and excipient are melt extruded. Two poorly water-soluble drugs, indomethacin and lacidipine, were selected along with 11 excipients (polymeric and non-polymeric). Estimation of drug/excipient miscibility was performed using a combination of the Hoy and Hoftzyer/Van Krevelen methods for Hansen solubility parameter calculation. Miscibility was experimentally investigated with differential scanning calorimetry (DSC) and hot stage microscopy (HSM). Studies were performed at drug/excipient ratios, 1:4, 1:1 and 4:1. Analysis of the glass transition temperature (T(g)) was performed by quench cooling drug/excipient melts in the DSC. Differences in the drug/excipient solubility parameters of 10 MPa(1/2) were expected to indicate a lack of miscibility and not form glass solutions when melt extruded. Experimentally, miscibility was shown by changes in drug/excipient melting endotherms and confirmed by HSM investigations. Experimental results were in agreement with solubility parameter predictions. In addition, drug/excipient combinations predicted to be largely immiscible often exhibited more than one T(g) upon reheating in the DSC. Melt extrusion of miscible components resulted in amorphous solid solution formation, whereas extrusion of an "immiscible" component led to amorphous drug dispersed in crystalline excipient. In conclusion, combining calculation of Hansen solubility parameters with thermal analysis of drug/excipient miscibility can be successfully applied to predict formation of glass solutions with melt extrusion.

  20. Pharmacokinetic parameters and biodistribution of soluble cytokine receptors.

    Science.gov (United States)

    Jacobs, C A; Beckmann, M P; Mohler, K; Maliszewski, C R; Fanslow, W C; Lynch, D H

    1993-01-01

    The potential use of soluble cytokine receptors as therapeutics in disease states when excessive or prolonged cytokine expression leads to pathogenesis is just beginning (Van Brunt, 1989). The inhibitory effects of soluble receptors have been found to be highly potent and specific for their respective cytokines (Maliszewski and Fanslow, 1990; Maliszewski et al., 1990). Recent in vivo data have shown that exogenously administered soluble receptors can function as cytokine antagonists and suppress autoimmune inflammatory responses (Jacobs et al., 1991a), allograft rejection, and alloreactivity (Fanslow et al., 1990b). The proposed frequency of administration and dosage of a therapeutic agent is dependent on the half-life of the agent and the route of administration. The elimination or half-life of a drug usually depends on its physiochemical properties (molecular size, glycosylation, isoelectric point, and hydrophobic/hydrophilic properties) (DiPalma and DiGregorio, 1990; Katzung, 1984). The half-life will also depend on the mechanism of clearance for that specific receptor. Once pharmacokinetic data are available for soluble receptors, the therapeutic potential of these molecules can be better evaluated. Only limited pharmacokinetic data are currently available for soluble cytokine receptors (Jacobs et al., 1991b). For sIL-1R, the majority of an intravenously administered dose was cleared in the second elimination phase, with a reasonably long half-life (6.3 hr), such that the entire dose was not eliminated until 35 hr. If administration is by subcutaneous injection, the half-life was even more prolonged. One explanation for the prolonged half-life is the minimal distribution to liver and kidneys and thus low levels of clearance by these organs. In contrast, elimination of intravenously administered sIL-4R was relatively rapid, with a short half-life (2.3 hr). This appeared mainly due to liver distribution and clearance, which has been the highest observed for any

  1. The time-dependent health and biochemical effects in rats exposed to stainless steel welding dust and its soluble form.

    Science.gov (United States)

    Halatek, Tadeusz; Stanislawska, Magdalena; Kaminska, Irena; Cieslak, Malgorzata; Swiercz, Radoslaw; Wasowicz, Wojciech

    2017-02-23

    Welding processes that generate fumes containing toxic metals, such as hexavalent chromium (Cr(VI)), manganese (Mn), and nickel (Ni), have been implicated in lung injury, inflammation, and lung tumor promotion in animal models. The principal objective of this study was to determine the dynamics of toxic effects of inhalation exposure to morphologically rated welding dust from stainless steel welding and its soluble form in TSE System with a dynamic airflow. We assessed the pulmonary toxicity of welding dust in Wistar rats exposed to 60.0 mg/m(3) of respirable-size welding dust (mean diameter 1.17 µm) for 2 weeks (6 h/day, 5 days/week); the aerosols were generated in the nose-only exposure chambers (NOEC). An additional aim included the study of the effect of betaine supplementation on oxidative deterioration in rat lung during 2 weeks of exposure to welding dust or water-soluble dust form. The animals were divided into eight groups (n = 8 per group): control, dust, betaine, betaine + dust, soluble-form dust, soluble-form dust + betaine, saline and saline + betaine groups. Rats were euthanized 1 or 2 weeks after the last exposure for assessment of pulmonary toxicity. Differential cell counts, total protein concentrations and cellular enzyme (lactate dehydrogenase-LDH) activities were determined in bronchoalveolar lavage (BAL) fluid, and corticosterone and thiobarbituric acid reactive substances (TBARS) concentrations were assessed in serum. The increase in polymorphonuclear (PMN) leukocytes in BAL fluid (a cytological index of inflammatory responses of the lung) is believed to reflect pulmonary toxicity of heavy metals. Biomarkers of toxicity assessed in bronchoalveolar fluids indicate that the level of the toxic effect depends mainly on the solubility of studied metal compounds; biomarkers that showed treatment effects included: total cell, neutrophil and lymphocyte counts, total protein concentrations, and cellular enzyme (lactate dehydrogenase) activity

  2. Use of surfactants as plasticizers in preparing solid dispersions of poorly soluble API: selection of polymer-surfactant combinations using solubility parameters and testing the processability.

    Science.gov (United States)

    Ghebremeskel, Alazar N; Vemavarapu, Chandra; Lodaya, Mayur

    2007-01-10

    Formation of solid dispersions as a means to enhance the dissolution rate of poorly soluble Active pharmaceutical ingredients (APIs) typically employs hydrophilic polymer systems and surfactants. While the utility of the surfactant systems in solubilization is well known, the secondary effects of the same on processing and subsequent physical stability of the solid dispersions needs to be studied further. Physical blends of the poorly soluble API and hydrophilic polymers such as PVP-K30, Plasdone-S630, HPMC-E5, HPMCAS, and Eudragit L100 with mass ratio 1:1 were prepared. The surfactants tested in this study included Tween-80, Docusate sodium, Myrj-52, Pluronic-F68 and SLS. Thermal analysis of the API-polymer-surfactant blends suggested that the surfactants caused solvation/plasticization, manifesting in reduction of (i) the melting (T(m)) of API (ii) T(g) of the polymers and (iii) the combined T(g) of the solid dispersion formed from quench cooling. Explanation of these effects of surfactants is attempted based on their physical state (at the temperature of interest), HLB values and similarity of their solubility parameter values with respect to drug-polymer systems. Furthermore, extruded matrices containing different API-polymer (PVP-K30, Plasdone-S630, and HPMC-E5) mixtures prepared with and without surfactants, were produced by feeding the powder blend through a hot-melt extruder. The melt viscosity of the polymer blends was assessed by torque rheometry using a Haake Rheomix. The physicochemical properties of the extruded API-polymer-surfactant were characterized by differential scanning calorimetry, X-ray diffraction, Raman spectroscopy, and polarized microscopy. The results demonstrated that the glass transition temperature of the carrier polymers decreased as direct result of the surfactants in the extrudate, due to an increase in the chain mobility of polymers. A decrease in the melt viscosity was seen due to a plasticization of the polymer. The drug release

  3. Consideration on thermodynamic data for predicting solubility and chemical species of elements in groundwater. Part 1: Tc, U, Am

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, Tetsuji; Takeda, Seiji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1999-01-01

    The solubility determines the release of radionuclides from waste form and is used as a source term in radionuclide migration analysis in performance assessment of radioactive waste repository. Complexations of radionuclides by ligands in groundwater affect the interaction between radionuclides and geologic media, thus affect their migration behavior. Thermodynamic data for Tc, Am and U were reviewed and compiled to be used for predicting the solubility and chemical species in groundwater. Thermodynamic data were reviewed with emphasis on the hydrolysis and carbonate complexation that can dominate the speciation in typical groundwater. Thermodynamic data for other species were selected based on existing database. Thermodynamic data for other important elements are under investigation, thus shown in an appendix for temporary use. (author)

  4. Beryllium solubility in occupational airborne particles: Sequential extraction procedure and workplace application.

    Science.gov (United States)

    Rousset, Davy; Durand, Thibaut

    2016-01-01

    Modification of an existing sequential extraction procedure for inorganic beryllium species in the particulate matter of emissions and in working areas is described. The speciation protocol was adapted to carry out beryllium extraction in closed-face cassette sampler to take wall deposits into account. This four-step sequential extraction procedure aims to separate beryllium salts, metal, and oxides from airborne particles for individual quantification. Characterization of the beryllium species according to their solubility in air samples may provide information relative to toxicity, which is potentially related to the different beryllium chemical forms. Beryllium salts (BeF(2), BeSO(4)), metallic beryllium (Bemet), and beryllium oxide (BeO) were first individually tested, and then tested in mixtures. Cassettes were spiked with these species and recovery rates were calculated. Quantitative analyses with matched matrix were performed using inductively coupled plasma mass spectrometry (ICP-MS). Method Detection Limits (MDLs) were calculated for the four matrices used in the different extraction steps. In all cases, the MDL was below 4.2 ng/sample. This method is appropriate for assessing occupational exposure to beryllium as the lowest recommended threshold limit values are 0.01 µg.m(-3) in France([) (1) (]) and 0.05 µg.m(-3) in the USA.([ 2 ]) The protocol was then tested on samples from French factories where occupational beryllium exposure was suspected. Beryllium solubility was variable between factories and among the same workplace between different tasks.

  5. Water-soluble chemistry and weathering characteristics of some tills in Western Dronning Maud Land, Antarctica

    Directory of Open Access Journals (Sweden)

    Lintinen, P.

    1997-12-01

    Full Text Available The water-soluble chemistry and weathering characteristics of tills were studied on three nunataks with differing bedrock characteristics in the Vestfjella and Heimefrontfjella areas of the Western Dronning Maud Land, Antarctica. The chemical analyses were performed using ion chromatography and ICP-AES. The relative weathering characteristics of the till surface boulders was assessed in study locations. No colour differences were observed in test pits dug in Basen and Utpostane nunataks at Vestfjella, whereas the till in Mygehenget nunatak at Heimefrontfjella has a pronounced soil profile in which the surface part has a banded rusty brown and light-coloured accumulations. The highest concentrations of readily soluble ions were recorded in the Mygehenget samples characterized by high (SO42- (5800-39000 ppm and Mg concentrations (540-6000 ppm, while the Basen samples had the highest concentrations of Fe2+(23-390 ppm, Al3+ (60-1000 ppm and Si4+ (23-1700 ppm and the Utpostane samples the lowest ones. The SO4/Na+, Na+/CI- and Mg2+/Na+ ratios for the samples differ markedly from those typically encountered in sea water. The presence of the highest concentrations of many of the analysed ions in the Mygehenget soil samples is in line with the advanced weathering of the surface boulders. The high Fe2+ , Si4+ and Al3+ concentrations in the Basen samples may be attributable to the weathering of olivine alteration products.

  6. Water soluble ions in aerosols (TSP) : Characteristics, sources and seasonal variation over the central Himalayas, Nepal

    Science.gov (United States)

    Tripathee, Lekhendra; Kang, Shichang; Zhang, Qianggong; Rupakheti, Dipesh

    2016-04-01

    Atmspheric pollutants transported from South Asia could have adverse impact on the Himalayan ecosystems. Investigation of aerosol chemistry in the Himalayan region in Nepal has been limited on a temporal and spatial scale to date. Therefore, the water-soluble ionic composition of aerosol using TSP sampler was investigated for a year period from April 2013 to March 2014 at four sites Bode, Dhunche, Lumbini and Jomsom characterized as an urban, rural, semi-urban and remote sites in Nepal. During the study period, the highest concentration of major cation was Ca2+ with an average concentration of 8.91, 2.17, 7.85 and 6.42 μg m-3 and the highest concentration of major anion was SO42- with an average of 10.96, 4.06, 6.85 and 3.30 μg m-3 at Bode, Dhunche, Lumbini and Jomsom respectively. The soluble ions showed the decrease in concentrations from urban to the rural site. Correlations and PCA analysis suggested that that SO42-, NO3- and NH4+ were derived from the anthropogenic sources where as the Ca2+ and Mg2+ were from crustal sources. Our results also suggest that the largest acid neutralizing agent at our sampling sites in the central Himalayas are Ca2+ followed by NH4+. Seasonal variations of soluble ions in aerosols showed higher concentrations during pre-monsoon and winter (dry-periods) due to limited precipitation amount and lower concentrations during the monsoon which can be explained by the dilution effect, higher the precipitation lower the concentration. K+ which is regarded as the tracer of biomss burning had a significant peaks during pre-monsoon season when the forest fires are active around the regions. In general, the results of this study suggests that the atmospheric chemistry is influenced by natural and anthropogenic sources. Thus, soluble ionic concentrations in aerosols from central Himalayas, Nepal can provide a useful database to assess atmospheric environment and its impacts on human health and ecosystem in the southern side of central

  7. Plasma soluble L-selectin in medicated patients with schizophrenia and healthy controls

    Science.gov (United States)

    Yang, Fang; Amin, Pooja A.; Zunta-Soares, Giovana; Colpo, Gabriela D.; Stertz, Laura; Sharma, Ajaykumar N.; Fries, Gabriel R.; Walss-Bass, Consuelo; Soares, Jair C.; Okusaga, Olaoluwa O.

    2017-01-01

    Immune dysfunction has been implicated in the pathophysiology of schizophrenia. Leukocyte migration to the site of inflammation is a fundamental step of immune response which involves P-, E-, and L-selectins. Elevated selectin levels have been reported in un-medicated first-episode patients with schizophrenia but not in medicated patients with multi-episode schizophrenia. We measured fasting plasma soluble P-, E-, and L-selectin in 39 medicated patients with multi-episode schizophrenia and 19 healthy controls. In patients, psychotic symptom severity and cognitive function were assessed with the Positive and Negative Syndrome Scale (PANSS) and the NIH Toolbox Cognitive Test Battery respectively. C-reactive protein (CRP) and Body Mass Index (BMI) were measured in patients and controls. Comparison of selectin levels between patients and controls was done with t-tests and linear regression. Pearson correlation coefficients between plasma selectins and PANSS and cognitive measures were calculated. Geometric mean plasma soluble L-selectin level was lower in patients compared to controls from unadjusted (606.7 ± 1.2 ng/ml vs. 937.7 ± 1.15 ng/ml, p < 0.001) and adjusted analyses (β = 0.59; CI 0.41 to 0.88, p = 0.011). There was a trend towards higher plasma soluble P-selectin in patients compared to controls (90.4 ± 1.2ng/ml vs. 71.8 ± 1.2ng/ml, p = 0.059) in the unadjusted analysis. There was no association between the selectins and psychotic symptoms or cognitive function in the patients. In addition, the selectins were not significantly associated with CRP or BMI. The limitations of this study include small sample size and unavailability of information on medications and blood cell counts. The potential utility of soluble L-selectin as a biomarker of antipsychotic exposure in patients with schizophrenia and the concomitant change in immune response with the use of antipsychotics should be further evaluated. PMID:28334045

  8. Capacity for absorption of water-soluble secondary metabolites greater in birds than in rodents.

    Directory of Open Access Journals (Sweden)

    William H Karasov

    Full Text Available Plant secondary metabolites (SMs are pervasive in animal foods and potentially influence feeding behavior, interspecies interactions, and the distribution and abundance of animals. Some of the major classes of naturally occurring SMs in plants include many water-soluble compounds in the molecular size range that could cross the intestinal epithelium via the paracellular space by diffusion or solvent drag. There are differences among species in paracellular permeability. Using Middle Eastern rodent and avian consumers of fruits containing SMs, we tested the hypothesis that avian species would have significantly higher paracellular permeability than rodent species. Permeability in intact animals was assessed using standard pharmacological methodology to measure absorption of two radiolabeled, inert, neutral water-soluble probes that do not interact with intestinal nutrient transporters, L-arabinose (M(r = 150.1 Da and lactulose (M(r = 342.3 Da. We also measured absorption of labeled 3-O-methyl-D-glucose (3OMD-glucose; M(r = 194.2 Da, which is a nonmetabolized analogue of D-glucose that is passively absorbed through the paracellular space but also transported across the enterocyte membranes. Most glucose was absorbed by all species, but arabinose fractional absorption (f was nearly three times higher in birds (1.03±0.17, n = 15 in two species compared to rodents (0.37±0.06, n = 10 in two species (P<0.001. Surprisingly, the apparent rates of absorption in birds of arabinose exceeded those of 3OMD-glucose. Our findings are in agreement with previous work showing that the paracellular pathway is more prominent in birds relative to nonflying mammals, and suggests that birds may be challenged by greater absorption of water-soluble, dietary SMs. The increased expression of the paracellular pathway in birds hints at a tradeoff: the free energy birds gain by absorbing water-soluble nutrients passively may be offset by the metabolic

  9. Microparticulation of whey protein: related factors affecting the solubility.

    Science.gov (United States)

    Lieske, B; Konrad, G

    1994-10-01

    Solubility of Simplesse 100, the only whey-based fat substitute, was found to be good, considering the fact that technology for preparation of Simplesse 100 is a sequence of thermal steps. To characterize this phenomen, gel chromatography on Sephadex G-100, Sephacryl S-1000 and SDS-PAGE were used, supported by high-speed separation, UV studies and analytical procedures. Results show that the unusual solubility characteristic of microparticulated whey protein is related to two molecular effects: (1) optimal defolding of protein molecules and (2) stabilization of the defolded status by carbohydrate. Both effects were considered to favour non-covalent bonds, which contribute to the outstanding physico-functional and nutritive properties of microparticles.

  10. Role of Hansen solubility parameters in solid phase extraction.

    Science.gov (United States)

    Bielicka-Daszkiewicz, K; Voelkel, A; Pietrzyńska, M; Héberger, K

    2010-08-27

    The sorbent-eluent systems combined from eight polymeric sorbents and seven solvents as eluents were used for the extraction of phenol and its oxidation products from water samples. The individual interactions between sorbents, eluents and analytes were characterized by Hansen solubility parameters. Principal components analysis (PCA) was used for revealing the dominant interactions (dispersive, polar, and hydrogen bonding type) in sorbent-analyte-eluent systems. The importance of solubility parameters was also determined by a novel procedure based on sum of ranking differences (SRD). Although PCA and ranking by SRD are based on different principles and calculations, they have provided very similar results. The recovery in a given system has been predicted from the magnitudes of mutual interactions (sorbent-analyte, sorbent-eluent, analyte-eluent) by multiple linear regression.

  11. Measurement of multicomponent solubility parameters for graphene facilitates solvent discovery.

    Science.gov (United States)

    Hernandez, Yenny; Lotya, Mustafa; Rickard, David; Bergin, Shane D; Coleman, Jonathan N

    2010-03-02

    We have measured the dispersibility of graphene in 40 solvents, with 28 of them previously unreported. We have shown that good solvents for graphene are characterized by a Hildebrand solubility parameter of delta(T) approximately 23 MPa(1/2) and Hansen solubility parameters of delta(D) approximately 18 MPa(1/2), delta(P) approximately 9.3 MPa(1/2), and delta(H) approximately 7.7 MPa(1/2). The dispersibility is smaller for solvents with Hansen parameters further from these values. We have used transmission electron microscopy (TEM) analysis to show that the graphene is well exfoliated in all cases. Even in relatively poor solvents, >63% of observed flakes have <5 layers.

  12. WATER SOLUBLE MAGNETITE NANOPARTICLES FOR ANTIMICROBIAL DRUGS DELIVERY

    Directory of Open Access Journals (Sweden)

    Dan Eduard Mihaiescu

    2012-06-01

    Full Text Available Water-soluble magnetite has been prepared through precipitation approach. These nanoparticles coated with sulfanilic acid could be dispersed in hydrated aqueous systems. The product was characterized with X-ray powder diffraction (XRD, Dynamic Light Scattering (DLS and the in vitro efficacy as antibiotic delivery vehicles as well as their influence on the eukariotic cells. The XRD pattern confirm the product to be Fe3O4. The nanoparticles with average size 10.45 nanometers are not cytotoxic and do not influence the eukariotic HeLa cell cycle, representing potential tools for the delivery of drugs in a safe manner. Water soluble magnetite improves the activity of currently used antibiotics, representing potential as a nanocarrier for these antimicrobial substances, to achieve extracellular and intracellular targets.

  13. Preparation of water soluble chitosan by hydrolysis using hydrogen peroxide.

    Science.gov (United States)

    Xia, Zhenqiang; Wu, Shengjun; Chen, Jinhua

    2013-08-01

    Chitosan is not soluble in water, which limits its wide application particularly in the medicine and food industry. In the present study, water soluble chitosan (WSC) was prepared by hydrolyzing chitosan using hydrogen peroxide under the catalysis of phosphotungstic acid in homogeneous phase. Factors affecting hydrolysis were investigated and the optimal hydrolysis conditions were determined. The WSC structure was characterized by Fourier transform infrared spectroscopy. The resulting products were composed of chitooligosaccharides of DP 2-9. The WSC content of the product and the yield were 94.7% and 92.3% (w/w), respectively. The results indicate that WSC can be effectively prepared by hydrolysis of chitosan using hydrogen peroxide under the catalysis of phosphotungstic acid.

  14. Solubility and aggregation of Gly(5) in water.

    Science.gov (United States)

    Karandur, Deepti; Wong, Ka-Yiu; Pettitt, B Montgomery

    2014-08-14

    Experimentally, the solubility of oligoglycines in water decreases as its length increases. Computationally, the free energy of solvation becomes more favorable with chain length for short (n = 1-5) oligoglycines. We present results of large scale simulations with over 600 pentaglycines at varying concentrations in explicit solvent to consider the mechanism of aggregation. The solubility limit of Gly5 for the force field used was calculated and compared with experimental values. We find that intermolecular interactions between pentaglycines are favored over interactions between glycine and water, leading to their aggregation. However, the interaction driving peptide associations, liquid-liquid phase separation, are not predominantly hydrogen bonding. Instead, non-hydrogen bonding interactions between partially charged atoms on the peptide backbone allow the formation of dipole-dipole and charge layering correlations that mechanistically stabilize the formation of large, stable peptide clusters.

  15. Soluble microbial products and their implications in mixed culture biotechnology.

    Science.gov (United States)

    Ni, Bing-Jie; Rittmann, Bruce E; Yu, Han-Qing

    2011-09-01

    Soluble microbial products (SMP) are soluble organic compounds released during normal biomass metabolism in mixed culture biotechnology. In this review, we give the up-to-date status on several essential SMP issues: mechanisms of SMP formation, differentiation between utilization-associated products (UAP) and biomass-associated products (BAP), biodegradability of the SMP components, how formation of SMP by autotrophs controls effluent quality and supports a substantial population of heterotrophs, mathematical modeling that includes SMP, and improving effluent quality by controlling SMP. We also present two timely examples that highlight our current understanding and give an indication of how SMP affects the performance of modern mixed culture biotechnology: membrane fouling of membrane bioreactors (MBRs) and the dynamics of SMP in anaerobic systems.

  16. Determination and Correlation for Solubility of Aromatic Acids in Solvents

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Solubility of benzoic acid, terephthalic acid and 2,6-naphthalene dicarboxylic acid in water, acetic acid, N,N-dimethyfformamide, N,N-dimethylacetamide, dimethyl sulphoxide and N-methyl-2-ketopyrrolidine were measured by dynamic method. The solubilities were calculated by UNIFAC group contribution method, in which new groups, BCCOOH and NCCOOH, were introduced to express the activity coefficients of aromatic acids and new interaction parameters of the new groups were expressed as the function of temperature, which were determined from the experimental data. The new interaction parameters provided good calculated result. The experimental data were also correlated with Wilson and λ-h models, and results were compared with present UNIFAC model.

  17. Soluble and cell surface receptors for tumor necrosis factor

    DEFF Research Database (Denmark)

    Wallach, D; Engelmann, H; Nophar, Y

    1991-01-01

    Tumor necrosis factor (TNF) initiates its multiple effects on cell function by binding at a high affinity to specific cell surface receptors. Two different molecular species of these receptors, which are expressed differentially in different cells, have been identified. The cDNAs of both receptor...... have recently been cloned. Antibodies to one of these receptor species (the p55, type I receptor) can trigger a variety of TNF like effects by cross-linking of the receptor molecules. Thus, it is not TNF itself but its receptors that provide the signal for the response to this cytokine...... in certain pathological situations. Release of the soluble receptors from the cells seems to occur by proteolytic cleavage of the cell surface forms and appears to be a way of down-regulating the cell response to TNF. Because of their ability to bind TNF, the soluble receptors exert an inhibitory effect...

  18. The Solubility of Natural Cellulose After DBD Plasma Treatment

    Institute of Scientific and Technical Information of China (English)

    WU Jun; ZENG Fengcai; CHEN Bingqiang

    2008-01-01

    Natural cellulose was treated by an atmospheric DBD plasma. The solubility of cel-lulose in a diluted alkaline solution after the plasma treatment was investigated. The properties were characterized by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spec-troscopy (FTIR) and scanning electron microscopy (SEM). The results indicated that the surface of cellulose treated by the argon DBD plasma was significantly etched, and the relevant force of hy-drogen bonding was decreased. This might be the essential reason for the solubility improvement of natural cellulose in the diluted alkaline solution. Through a comparison of two discharge modes, the atmospheric DBD plasma gun and the parallel plate capacitively coupled DBD plasma, it wasfound that the atmospheric DBD plasma gun was more effective in fragmentizing the cellulose due to its production of a high energy plasma based on its special structure [6] .

  19. Purification and characterization of a soluble calnexin from human placenta.

    Science.gov (United States)

    Olsen, Dorthe T; Peng, Li; Træholt, Sofie D; Duus, Karen; Højrup, Peter; Houen, Gunnar

    2013-11-01

    Calreticulin (Crt) and calnexin (Cnx) are homologous endoplasmic reticulum (ER) chaperones involved in protein folding and quality control. Crt is a soluble ER luminal Mr 46 kDa protein and Cnx is a Mr 67kDa ER membrane protein. During purification of Crt from human placenta a soluble form of Cnx (sCnx) was consistently identified in a separate ion exchange chromatography peak. The sCnx was further purified and characterised. This showed that the protein had been cleaved after residue 472 (between Gln and Met), thus liberating it from the transmembrane and cytoplasmic parts of Cnx. The extraction and initial purification steps were carried out in the presence of protease inhibitors, thus ruling out that the cleavage was an artefact of the isolation procedure. This indicates that sCnx may have a physiological chaperone function similar to that of Crt.

  20. Mechanisms for oral absorption of poorly water-soluble compounds

    DEFF Research Database (Denmark)

    Lind, Marianne Ladegaard

    in the development of lipid-based formulations. However, in order for optimum formulations to be developed, knowledge of the mechanisms of absorption of poorly water-soluble drug substances is desired. Accordingly, the purpose of this PhD study was to study the effects of endogenous surfactants (bile salts...... the intake of a lipid-rich meal can increase the bioavailability due to slower gastric emptying, increased solubilization of the drug substance in the intestinal fluids by endogenous and exogenous components, inhibition of efflux carriers and induction of intestinal lymphatic transport. Some...... of these processes can also be obtained by formulating the poorly water-soluble drug substances in lipid-based formulations. Then the drug substance is in solution when administered. Consequently, an enhanced and less variable bioavailability can be obtained, and this has led to an increasing interest...

  1. Human Soluble TRAIL Protein Inducing Apoptosis in Osteosarcoma Cell

    Institute of Scientific and Technical Information of China (English)

    ZHU Shaobo; YU Aixi; ZHANG Zhongning; WU Gang

    2007-01-01

    This study is to examine the effect of human recombinant soluble TRAIL (TNF-related apoptosis-inducing ligand) protein inducing apoptosis in MG-63 human osteosarcoma cells. The inhibitive rates of TRAIL to MG-63 cells were detected by MTT assay. The apoptosis induced by TRAIL in MG-63 human osteosarcoma cells was analyzed with FACS and TUNEL and the apoptotic bodies were observed by transmission electron microscope. MTT assay showed that the inhibitive rates of 500, 1 000,2 000 and 4 000 ng/mL TRAIL for 24 h were 10.1%, 24.3%,50.6% and 97.7% respectively. Flow cytometric analysis showed that after MG-63 cells were treated with 2 μg/mL TRAIL for 6 h,obvious apoptotic peak would immediately appear before diploid peak. Human soluble TRAIL protein can quickly kill MG-63 osteosarcoma cells selectively, and may have potential value for clinical treatment of osteosarcoma.

  2. Soluble vascular endothelial growth factor in various blood transfusion components

    DEFF Research Database (Denmark)

    Nielsen, Hans Jørgen; Werther, K; Mynster, T;

    1999-01-01

    BACKGROUND: Blood transfusion may reduce survival after curative surgery for solid tumors. This may be related to extracellular content of cancer growth factors present in transfusion components. Vascular endothelial growth factor (VEGF) is a potent stimulator of angiogenesis in solid tumors....... The potential content of VEGF in various blood components for transfusion was evaluated. STUDY DESIGN AND METHODS: Soluble VEGF (sVEGF, isotype 165) was determined by an enzyme-linked immunosorbent assay (EIA) in serum and plasma samples and in lysed cells from healthy volunteers. Subsequently, total content...... of platelet-derived soluble plasminogen activator inhibitor type 1 (sPAI-1) was determined by an EIA in the same samples. Finally, the extracellular accumulation of sVEGF was determined in nonfiltered WB and SAGM blood during storage for 35 days and in BCP pools during storage for 7 days. RESULTS...

  3. OZONE TREATMENT OF SOLUBLE ORGANICS IN PRODUCED WATER

    Energy Technology Data Exchange (ETDEWEB)

    Klasson, KT

    2002-03-14

    This project was an extension of previous research to improve the applicability of ozonation and will help address the petroleum-industry problem of treating produced water containing soluble organics. The goal of this project was to maximize oxidation of hexane-extractable organics during a single-pass operation. The project investigated: (1) oxidant production by electrochemical and sonochemical methods, (2) increasing the mass transfer rate in the reactor by forming microbubbles during ozone injection into the produced water, and (3) using ultraviolet irradiation to enhance the reaction if needed. Several types of methodologies for treatment of soluble organics in synthetic and actual produced waters have been performed. The technologies tested may be categorized as follows: (1) Destruction via sonochemical oxidation at different pH, salt concentration, ultraviolet irradiation, and ferrous iron concentrations. (2) Destruction via ozonation at different pH, salt concentration, hydrogen peroxide concentrations, ultraviolet irradiation, temperature, and reactor configurations.

  4. Solubility of the sesquiterpene alcohol patchoulol in supercritical carbon dioxide.

    Science.gov (United States)

    Hybertson, Brooks M

    2007-01-01

    The solubility of the sesquiterpene alcohol patchoulol in supercritical carbon dioxide was measured at P ranging from 10.0 MPa to 25.0 MPa and T of 40.0 and 50.0 °C using a simple microsampling type apparatus with a 100.5 µL sample loop to remove aliquots for off-line analysis. The system was first validated using vanillin with off-line spectrophotometric analysis, then utilized for patchoulol measurements with off-line GC-MS analysis. The measured solubility of patchoulol in supercritical CO(2) ranged from mole fractions of 0.43 × 10(-3) at 10.0 MPa and 50.0 °C to 9.45 × 10(-3) at 25.0 MPa and 40.0 °C.

  5. Examination of Solubility Models for the Determination of Transition Metals within Liquid Alkali Metals

    Directory of Open Access Journals (Sweden)

    Jeremy Isler

    2016-06-01

    Full Text Available The experimental solubility of transition metals in liquid alkali metal was compared to the modeled solubility calculated using various equations for solubility. These equations were modeled using the enthalpy calculations of the semi-empirical Miedema model and various entropy calculations. The accuracy of the predicted solubility compared to the experimental data is more dependent on which liquid alkali metal is being examined rather than the transition metal solute examined. For liquid lithium the calculated solubility by the model was generally larger than experimental values, while for liquid cesium the modeling solubility was significantly smaller than the experimental values. For liquid sodium, potassium, and rubidium the experimental solubilities were within the range calculated by this study. Few data approached the predicted temperature dependence of solubility and instead most data exhibited a less pronounced temperature dependence.

  6. New water-soluble carbamate ester derivatives of resveratrol

    OpenAIRE

    Andrea Mattarei; Massimo Carraro; Michele Azzolini; Cristina Paradisi; Mario Zoratti; Lucia Biasutto

    2014-01-01

    Low bioavailability severely hinders exploitation of the biomedical potential of resveratrol. Extensive phase-II metabolism and poor water solubility contribute to lowering the concentrations of resveratrol in the bloodstream after oral administration. Prodrugs may provide a solution—protection of the phenolic functions hinders conjugative metabolism and can be exploited to modulate the physicochemical properties of the compound. We report here the synthesis and characterization of carb...

  7. Measuring Compartment Size and Gas Solubility in Marine Mammals

    Science.gov (United States)

    2014-09-30

    understand better the health status of marine mammals . OBJECTIVE 2 Aim 1: Design of anaerobic grinder. The device was tested in three deceased... Mammals Michael Moore Biology Department Woods Hole Oceanographic Institution Woods Hole, MA 02543 phone: (508) 289-3228 fax: (508) 457...study is to develop methods to estimate marine mammal tissue compartment sizes, and tissue gas solubility. We aim to improve the data available for

  8. Multiple sources of soluble atmospheric iron to Antarctic waters

    Science.gov (United States)

    Winton, V. H. L.; Edwards, R.; Delmonte, B.; Ellis, A.; Andersson, P. S.; Bowie, A.; Bertler, N. A. N.; Neff, P.; Tuohy, A.

    2016-03-01

    The Ross Sea, Antarctica, is a highly productive region of the Southern Ocean. Significant new sources of iron (Fe) are required to sustain phytoplankton blooms in the austral summer. Atmospheric deposition is one potential source. The fractional solubility of Fe is an important variable determining Fe availability for biological uptake. To constrain aerosol Fe inputs to the Ross Sea region, fractional solubility of Fe was analyzed in a snow pit from Roosevelt Island, eastern Ross Sea. In addition, aluminum, dust, and refractory black carbon (rBC) concentrations were analyzed, to determine the contribution of mineral dust and combustion sources to the supply of aerosol Fe. We estimate exceptionally high dissolved Fe (dFe) flux of 1.2 × 10-6 g m-2 y-1 and total dissolvable Fe flux of 140 × 10-6 g m-2 y-1 for 2011/2012. Deposition of dust, Fe, Al, and rBC occurs primarily during spring-summer. The observed background fractional Fe solubility of ~0.7% is consistent with a mineral dust source. Radiogenic isotopic ratios and particle size distribution of dust indicates that the site is influenced by local and remote sources. In 2011/2012 summer, relatively high dFe concentrations paralleled both mineral dust and rBC deposition. Around half of the annual aerosol Fe deposition occurred in the austral summer phytoplankton growth season; however, the fractional Fe solubility was low. Our results suggest that the seasonality of dFe deposition can vary and should be considered on longer glacial-interglacial timescales.

  9. Functionalized Carbosilane Dendritic Species as Soluble Support in Organic Synthesis

    NARCIS (Netherlands)

    Koten, G. van; Hovestad, N.J.; Ford, A.; Jastrzebski, J.T.B.H.

    2000-01-01

    A new methodology, which is compatible with the use of reactive organometallic reagents, has been developed for the use of carbosilane dendrimers as soluble supports in organic synthesis. Hydroxy-functionalized dendritic carbosilanes Si[CH2CH2CH2SiMe2(C6H4CH(R)OH)]4 (G0-OH, R = H or (S)-Me) and Si[C

  10. Measuring Compartment Size and Gas Solubility in Marine Mammals

    Science.gov (United States)

    2015-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Measuring Compartment Size and Gas Solubility in Marine...relative size of different tissues in various marine mammal species, as well as our understanding of their different morphological and physiological...available for the relative size of different tissues in various marine mammal species, as well as our understanding of the different morphological and

  11. Water Soluble Iron aminoclay for Catalytic Reduction of Nitrophenol

    Directory of Open Access Journals (Sweden)

    S. ANBU ANJUGAM VANDARKUZHALI

    2013-06-01

    Full Text Available Water soluble iron decorated phyllosilicate is synthesized through one pot sol-gel synthesis by a wet chemical method using NaBH4 as reducing agent. The as-synthesized nanocomposite is characterized by powder-XRD and TGA techniques. The morphology of the composite is obtained using HRSEM and HRTEM. The prepared nanocomposite is an efficient catalyst for the reduction of nitrophenol.

  12. Hildebrand solubility parameters measurement via sessile drops evaporation

    Science.gov (United States)

    Fang, Xiaohua; Li, Bingquan; Sokolov, Jonathan C.; Rafailovich, Miriam H.; Gewaily, Dina

    2005-08-01

    A method for the measurement of Hildebrand solubility parameter has been developed. This method was based on the measurement of the sessile drop contact angle and contact base width during its evaporation. Experimental results showed that this method is accurate and insensitive to the measurement conditions. The major advantages of this method are that it is time efficient and requires a small amount of liquid (microliter) for the measurement.

  13. Study on the polarity, solubility, and stacking characteristics of asphaltenes

    KAUST Repository

    Zhang, Long-li

    2014-07-01

    The structure and transformation of fused aromatic ring system in asphaltenes play an important role in the character of asphaltenes, and in step affect the properties of heavy oils. Polarity, solubility and structural characteristics of asphaltenes derived from Tahe atmospheric residue (THAR) and Tuo-826 heavy crude oil (Tuo-826) were analyzed for study of their internal relationship. A fractionation method was used to separate the asphaltenes into four sub-fractions, based on their solubility in the mixed solvent, for the study of different structural and physical-chemical properties, such as polarity, solubility, morphology, stacking characteristics, and mean structural parameters. Transmission electron microscope (TEM) observation can present the intuitive morphology of asphaltene molecules, and shows that the structure of asphaltenes is in local order as well as long range disorder. The analysis results showed that n-heptane asphaltenes of THAR and Tuo-826 had larger dipole moment values, larger fused aromatic ring systems, larger mean number of stacking layers, and less interlayer spacing between stacking layers than the corresponding n-pentane asphaltenes. The sub-fractions that were inclined to precipitate from the mixture of n-heptane and tetrahydrofuran had larger polarity and less solubility. From the first sub-fraction to the fourth sub-fraction, polarity, mean stacking numbers, and average layer size from the TEM images follow a gradual decrease. The structural parameters derived from TEM images could reflect the largest fused aromatic ring system in asphaltene molecule, yet the parameters derived from 1H NMR data reflected the mean message of poly-aromatic ring systems. The structural parameters derived from TEM images were more consistent with the polarity variation of sub-fractions than those derived from 1H NMR data, which indicates that the largest fused aromatic ring system will play a more important role in the stacking characteristics of

  14. Solubility and Phase Behavior of CL20 in Supercritical Fluids

    Science.gov (United States)

    2006-09-01

    supercritical state. The fugacity of the solute in the supercritical fluid can be evaluated using a cubic equation of state such as the Redlich - Kwong ...pro- gram was validated using available literature data for the solubility of naphthalene and of biphenyl in supercritical CO2. The applicability of...promising process using environmentally benign compressed gases as either solvents or anti-solvents is being investi- gated for applications in

  15. The solubilities and solubility products of zirconium hydroxide and oxide after aging at 278, 313, and 333 K

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Taishi; Uemura, Takuya; Sasaki, Takayuki; Takagi, Ikuji [Kyoto Univ. (Japan). Dept. of Nuclear Engineering; Moriyama, Hirotake [Kyoto Univ. (Japan). Research Reactor Inst.

    2016-07-01

    The solubilities of zirconium hydroxide and oxide after aging at 278, 313, and 333 K were measured at 278, 298, 313, and 333 K in the pH{sub c} range of 0.3-7 in a 0.5 M ionic strength solution of NaClO{sub 4} and HClO{sub 4}. Size distributions of the colloidal species were investigated by ultrafiltration using membranes with different pore sizes, and the solid phases were examined by X-ray diffraction. The apparent solubility of zirconium amorphous hydroxide (Zr(OH){sub 4}(am)), prepared by the oversaturation method, decreased with increasing aging temperature (T{sub a}), and the size distributions obtained after aging at elevated temperatures indicated the growth of the colloidal species. We, therefore, suggested that agglomeration of the colloidal species and dehydration and crystallization of Zr(OH){sub 4}(am) as the solubility-limiting solid phase occurred over the course of aging at elevated temperatures. For sample solutions of the crystalline oxide (ZrO{sub 2}(cr)), the aging temperature had no significant effect on the solubility, but the solubility data at lower temperatures were found to be slightly higher than those at higher temperatures, implying a small fraction of the amorphous components. In the analysis of different solid phases (Zr(OH){sub 4}(s,T{sub a}), T{sub a} = 278, 313, and 333 K) depending on the aging temperatures, the solubility products (K{sub sp}, T{sub a}) were determined at different measurement temperatures, and the enthalpy change (Δ{sub r}H {sup circle}) for Zr{sup 4+} 4OH{sup -} <=> Zr(OH){sub 4}(s,T{sub a}) was calculated using the van't Hoff equation. The solid-phase-transformation process at elevated temperatures was also analyzed based on the obtained K{sub sp}, T{sub a} and Δ{sub r}H {sup circle} values.

  16. A Novel Approach to Bioleach Soluble Phosphorus from Rock Phosphate

    Institute of Scientific and Technical Information of China (English)

    池汝安; 肖春桥; 黄晓慧; 王存文; 吴元欣

    2007-01-01

    A novel approach to bioleach soluble phosphorus from rock phosphate, involving the bio-oxidation of pyrite by adaptated Acidithiobacillus ferrooxidans (At. f) and the product of sulfuric acid to dissolve rock phosphate, has been proposed in this paper. The soluble phosphorus could be leached more effectively in the presence of pyrite by At. f than that leached directly by sulfuric acid. The optimal technological parameters are presented. The highest phosphorus leaching rate is 9.00% when the culture substrate is the mixture of FeSO4·7H2O and pyrite, the phosphorus leaching rate is 8.00% when the initial pH and culture time are 2.5 and 5 d, respectively. The optimal rock phosphate particle size is 0.05 mm for the leaching of phosphorus. The bigger the grains of pyrite, the lower the phosphorus leaching rate. The bacterium At. f should be appropriately adaptated, which makes it easier to bioleach soluble phosphorus from rock phosphate.

  17. SYNTHESIS AND CHARACTERIZATION OF HIGHLY SOLUBLE AROMATIC POLYIMIDES

    Institute of Scientific and Technical Information of China (English)

    Xiao-hua Huang; Wei Huang; Yong-feng Zhou; De-yue Yan

    2011-01-01

    Two highly soluble aromatic polyimides were synthesized successfully from a diamine with two tert-butyl groups (MBTBA) and dianhydrides with a thioether or sulfone moiety (DTDA and DSDA). Both of them showed excellent solubility in common solvents such as chloroform, tetrahydrofuran and dioxane at the room temperature. The numberaverage molecular weight was 6.0 × 104 and 8.3 × 104 according to gel permeation chromatography relative to a polystyrene standard, and the polydispersity index was 1.80 and 1.82 respectively. The glass-transition temperatures of them were 286℃and 314℃ (or 315℃ and 358℃) respectively, as measured by differential scanning calorimetry (or dynamic mechanical analysis). The 5% weight loss temperature of both was near 490℃ in N2 by thermogravimetric analysis. These results indicated that the tert-butyl pendent groups reduced the interactions among polymer chains and the thioether or sulfone moiety was flexible which may improve their solubility in conventional organic solvents without the loss of thermal stability.Transparent and flexible films of the two polyimides were obtained via solution casting. The MBTBA-DTDA membrane had higher storage moduli than those of the MBTBA-DSDA membrane.

  18. Fat-Soluble Vitamin Status in Self-Neglecting Elderly

    Science.gov (United States)

    Kala, G.; Oliver, S. Mathews; Kelly, P. A.; Pickens, S.; Burnett, J.; Dyer, C. B.; Smith, S. M.

    2006-01-01

    Elder self-neglect is a form of elder mistreatment. The systematic characterization of self-neglecting individuals is the goal of the CREST project. Reported here is the evaluation of fat-soluble vitamin status. Self-neglect (SN) subjects were recruited and consented following referral from Adult Protective Services. Control (CN) subjects were matched for age, gender, race, and socioeconomic status, as possible. We report here on 47 SN subjects (age 77 plus or minus 7, mean plus or minus SD; body weight 76 kg plus or minus 26) and 40 CN subjects (77 y plus or minus 7, 79 kg plus or minus 20). Blood samples were analyzed for indices of fat-soluble vitamin status. Plasma retinol (p less than 0.01) was lower in SN subjects. Plasma tocopherol tended (p less than 0.06) to be lower in SN subjects, while gamma-tocopherol was unchanged. SN subjects tended to have lower serum 25-OH vitamin D (p less than 0.11), and to be vitamin D deficient (26% below 23 mmol/L). Hypercalcemia occurred more often in SN subjects (23% had values above 2.56 mmol/L), as did elevated parathyroid hormone concentrations (p less than 0.05). These data demonstrate that many nutrients are affected in the self-neglecting elderly, and that long-term deficits are evident by the nature of changes in fat soluble vitamins.

  19. Soluble organic nitrogen in forest soils of northeast China

    Institute of Scientific and Technical Information of China (English)

    SONG Li-chen; HAO Jing-mei; CUI Xiao-yang

    2008-01-01

    Soluble organic nitrogen (SON) is recognized as a sensitive indicator of soil nitrogen status. The present work was conducted in the temperate forests of northeast China where soils are typically characterized by high organic matter and high organic nitrogen content, and soil sampling was made in early spring just after the freeze-thaw period. The water extracted SON pools in the organic layer of forest soils were measured within the range from 156.0 mg·kg-1 to 292.6 mg·kg-1, a similar magnitude of salt solution extracted SON pools reported in literatures. However, the water soluble SON pools in 0-15 cm mineral soils in present study were much higher (3-10 times) than any other reports, ranging from 58.6 mg·kg-1 to 125.2 mg·kg-1. Water soluble SON varied markedly among the soils under different forests and at different sites. The SON in water extracts were positively and significantly correlated to soil organic matter and total nitrogen contents, but negatively correlated to microbial biomass nitrogen (MBN). The reasons of the abnormally large SON pools and the negative correlations between SON and MBN in the 0-15cm mineral soils in this study were specially discussed.

  20. Solubility effects in waste-glass/demineralized-water systems

    Energy Technology Data Exchange (ETDEWEB)

    Fullam, H.T.

    1981-06-01

    Aqueous systems involving demineralized water and four glass compositions (including standins for actinides and fission products) at temperatures of up to 150/sup 0/C were studied. Two methods were used to measure the solubility of glass components in demineralized water. One method involved approaching equilibrium from subsaturation, while the second method involved approaching equilibrium from supersaturation. The aqueous solutions were analyzed by induction-coupled plasma spectrometry (ICP). Uranium was determined using a Scintrex U-A3 uranium analyzer and zinc and cesium were determined by atomic absorption. The system that results when a waste glass is contacted with demineralized water is a complex one. The two methods used to determine the solubility limits gave very different results, with the supersaturation method yielding much higher solution concentrations than the subsaturation method for most of the elements present in the waste glasses. The results show that it is impossible to assign solubility limits to the various glass components without thoroughly describing the glass-water systems. This includes not only defining the glass type and solution temperature, but also the glass surface area-to-water volume ratio (S/V) of the system and the complete thermal history of the system. 21 figures, 22 tables. (DLC)