International Accreditation of ASME Codes and Standards

International Nuclear Information System (INIS)

Green, Mervin R.

1989-01-01

ASME established a Boiler Code Committee to develop rules for the design, fabrication and inspection of boilers. This year we recognize 75 years of that Code and will publish a history of that 75 years. The first Code and subsequent editions provided for a Code Symbol Stamp or mark which could be affixed by a manufacturer to a newly constructed product to certify that the manufacturer had designed, fabricated and had inspected it in accordance with Code requirements. The purpose of the ASME Mark is to identify those boilers that meet ASME Boiler and Pressure Vessel Code requirements. Through thousands of updates over the years, the Code has been revised to reflect technological advances and changing safety needs. Its scope has been broadened from boilers to include pressure vessels, nuclear components and systems. Proposed revisions to the Code are published for public review and comment four times per year and revisions and interpretations are published annually; it's a living and constantly evolving Code. You and your organizations are a vital part of the feedback system that keeps the Code alive. Because of this dynamic Code, we no longer have columns in newspapers listing boiler explosions. Nevertheless, it has been argued recently that ASME should go further in internationalizing its Code. Specifically, representatives of several countries, have suggested that ASME delegate to them responsibility for Code implementation within their national boundaries. The question is, thus, posed: Has the time come to franchise responsibility for administration of ASME's Code accreditation programs to foreign entities or, perhaps, 'institutes.' And if so, how should this be accomplished?

Temporal Deductive Verification of Basic ASM Models

OpenAIRE

Daho, Hocine El-Habib; University of Oran; Benhamamouch, Djillali; University of Oran

2010-01-01

Abstract State Machines (ASMs, for short) provide a practical new computational model which has been applied in the area of software engineering for systems design and analysis. However, reasoning about ASM models occurs, not within a formal deductive system, but basically in the classical informal proofs style of mathematics. Several formal verification approaches for proving correctness of ASM models have been investigated. In this paper we consider the use of the TLA+logic for the deductive...

Meeting the difficulties of an ASME calibration for pipe welds

Energy Technology Data Exchange (ETDEWEB)

Ginzel, E., E-mail: eginzel@mri.on.ca [Materials Research Inst., Waterloo, Ontario (Canada); Ginzel, R.; Buchholz, J., E-mail: rginzel@eclipsescientific.com [Eclipse Scientific, Waterloo, Ontario (Canada)

2013-11-15

The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel code Section V deals with Non-Destructive Testing (NDT). In North America the use of ASME Sec. V is not always limited to just ASME regulated projects. Even such seemingly unrelated Standards as CSA Z662 (the Canadian construction standard for Oil and Gas Pipeline Systems) references this document for some aspects of the NDT. ASME has several codes that are dedicated to piping welds, for example ASME 31.1, 31.3 and 31.8. All of them reference back to ASME Section V Article 4 for the accepted techniques to use when UT is the examination option, but sometimes ASME is not very helpful. As they try to leave options open in one area they close the doors in others, or so it seems when reading the clauses as mandatory where you see the word 'shall'. This paper will attempt to layout the issues with pipe weld inspections as per Article 4, 2011 edition. Like all other codes and standards, ASME is a regulated standard that is regularly reviewed and updated, and one must be careful to reference the year of the edition being used. For the purposes of this paper we have used the 2010/11 edition. (author)

Meeting the difficulties of an ASME calibration for pipe welds

International Nuclear Information System (INIS)

Ginzel, E.; Ginzel, R.; Buchholz, J.

2013-01-01

The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel code Section V deals with Non-Destructive Testing (NDT). In North America the use of ASME Sec. V is not always limited to just ASME regulated projects. Even such seemingly unrelated Standards as CSA Z662 (the Canadian construction standard for Oil and Gas Pipeline Systems) references this document for some aspects of the NDT. ASME has several codes that are dedicated to piping welds, for example ASME 31.1, 31.3 and 31.8. All of them reference back to ASME Section V Article 4 for the accepted techniques to use when UT is the examination option, but sometimes ASME is not very helpful. As they try to leave options open in one area they close the doors in others, or so it seems when reading the clauses as mandatory where you see the word 'shall'. This paper will attempt to layout the issues with pipe weld inspections as per Article 4, 2011 edition. Like all other codes and standards, ASME is a regulated standard that is regularly reviewed and updated, and one must be careful to reference the year of the edition being used. For the purposes of this paper we have used the 2010/11 edition. (author)

An example of a component replacement when applying ASME N509 and ASME N510 to older ventilation systems

Energy Technology Data Exchange (ETDEWEB)

Arndt, T.E. [Westinghouse Hanford Company, Richland, WA (United States)

1995-02-01

This paper presents an example of a component replacement (electric heater) when installed in an older ventilation system that was constructed before the issuance of ASME N509{sup 1} and N510{sup 2}. Many of the existing ventilation systems at the Hanford Site were designed, fabricated, and installed before the issuance of ASME N509{sup 1} and N510{sup 2}. Requiring the application of these codes to existing ventilation systems presents challenges to the engineer when design changes are needed. Although it may seem that the application of ASME N509{sup 1} or N510{sup 2} may be a hindrance at times, this does not need to occur. Proper preparation at the start of project or design modifications can minimize frustration to the engineer when it is judged that portions of ASME N509{sup 1} and N510{sup 2} do not apply in a particular application.

Review of ASME-NH Design Materials for Creep-Fatigue

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Kim, Jong Bum

2010-01-01

To review and recommend the candidate design materials for the Sodium-Cooled Fast Reactor, the material sensitivity evaluations by the comparison of design data between the ASME-NH materials were performed by using the SIE ASME-NH computer program implementing the material database of the ASME-NH. The design material data provided by the ASME-NH code are the elastic modulus and yield Strength, Time-Independent Allowable Stress Intensity value, time-dependent allowable stress intensity value, expected minimum stress-to rupture value, stress rupture Factors for weldment, isochronous stress-strain curves, and design fatigue curves. Among these, the data related with the creep-fatigue evaluation are investigated in this study

Cisco ASM Router

CERN Multimedia

2001-01-01

One of the two "ASM/2-32EM" boxes installed in 1988, from "Cisco Systems Inc." - then an unknown 20-employee company in Menlo Park, California (USA). This is one of the first two Cisco boxes to appear in Switzerland, and possibly Europe. The 220v power supply was a special modification made for use at CERN. They supported IP address filtering, which seemed just what CERN needed to help protect the new Cray XMP-48 super computer from network hackers. The two ASM boxes were both routers and terminal servers. They protected a secure private Ethernet segment used by the Cray project, as well as providing secure terminal connections to that segment, including CERN's first dialback terminal service, which allowed Cray and CERN system analysts to work on the machine from home, using another Cisco feature called TACACS. (Kindly offered by B. Segal who discovered this company while at a Usenix Conference in Phoenix, Arizona in June 1987.)

Report on the Current Technical Issues on ASME Nuclear Code and Standard

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Lee, B. S.; Yoo, S. H.

2008-11-01

This report describes the analysis on the current revision movement related to the mechanical design issues of the U.S ASME nuclear code and standard. ASME nuclear mechanical design in this report is composed of the nuclear material, primary system, secondary system and high temperature reactor. This report includes the countermeasures based on the ASME Code meeting for current issues of each major field. KAMC(ASME Mirror Committee) of this project is willing to reflect a standpoint of the domestic nuclear industry on ASME nuclear mechanical design and play a technical bridge role for the domestic nuclear industry in ASME Codes application

Regulation of dynein-mediated autophagosomes trafficking by ASM in CASMCs.

Science.gov (United States)

Xu, Ming; Zhang, Qiufang; Li, Pin-Lan; Nguyen, Thaison; Li, Xiang; Zhang, Yang

2016-01-01

Acid sphingomyelinase (ASM; gene symbol Smpd1) has been shown to play a crucial role in autophagy maturation by controlling lysosomal fusion with autophagosomes in coronary arterial smooth muscle cells (CASMCs). However, the underlying molecular mechanism by which ASM controls autophagolysosomal fusion remains unknown. In primary cultured CASMCs, lysosomal Ca2+ induced by 7-ketocholesterol (7-Ket, an atherogenic stimulus and autophagy inducer) was markedly attenuated by ASM deficiency or TRPML1 gene silencing suggesting that ASM signaling is required for TRPML1 channel activity and subsequent lysosomal Ca(2+) release. In these CASMCs, ASM deficiency or TRPML1 gene silencing markedly inhibited 7-Ket-induced dynein activation. In addition, 7-Ket-induced autophagosome trafficking, an event associated with lysosomal Ca(2+) release and dynein activity, was significantly inhibited in ASM-deficient (Smpd1(-/-)) CASMCs compared to that in Smpd1(+/+) CASMCs. Finally, overexpression of TRPML1 proteins restored 7-Ket-induced lysosomal Ca(2+) release and autophagosome trafficking in Smpd1-/- CASMCs. Collectively, these results suggest that ASM plays a critical role in regulating lysosomal TRPML1-Ca(2+) signaling and subsequent dynein-mediated autophagosome trafficking, which leads its role in controlling autophagy maturation in CASMCs under atherogenic stimulation.

ASME nuclear codes and standards risk management strategic planning

International Nuclear Information System (INIS)

Hill, Ralph S. III; Balkey, Kenneth R.; Erler, Bryan A.; Wesley Rowley, C.

2007-01-01

This paper is prepared in honor and in memory of the late Professor Emeritus Yasuhide Asada to recognize his contributions to ASME Nuclear Codes and Standards initiatives, particularly those related to risk-informed technology and System Based Code developments. For nearly two decades, numerous risk-informed initiatives have been completed or are under development within the ASME Nuclear Codes and Standards organization. In order to properly manage the numerous initiatives currently underway or planned for the future, the ASME Board on Nuclear Codes and Standards (BNCS) has an established Risk Management Strategic Plan (Plan) that is maintained and updated by the ASME BNCS Risk Management Task Group. This paper presents the latest approved version of the plan beginning with a background of applications completed to date, including the recent probabilistic risk assessment (PRA) standards developments for nuclear power plant applications. The paper discusses planned applications within ASME Nuclear Codes and Standards that will require expansion of the ASME PRA Standard to support new advanced light water reactor and next generation reactor developments, such as for high temperature gas-cooled reactors. Emerging regulatory developments related to risk-informed, performance- based approaches are summarized. A long-term vision for the potential development and evolution to a nuclear systems code that adopts a risk-informed approach across a facility life-cycle (design, construction, operation, maintenance, and closure) is also summarized. Finally, near term and long term actions are defined across the ASME Nuclear Codes and Standards organizations related to risk management, including related U.S. regulatory activities. (author)

AsmL Specification of a Ptolemy II Scheduler

DEFF Research Database (Denmark)

Lázaro Cuadrado, Daniel; Koch, Peter; Ravn, Anders Peter

2003-01-01

Ptolemy II is a tool that combines different computational models for simulation and design of embedded systems. AsmL is a software specification language based on the Abstract State Machine formalism. This paper reports on development of an AsmL model of the Synchronous Dataflow domain scheduler...

A user's perspective on the merits and shortcomings of ASME Section III

International Nuclear Information System (INIS)

Antaki, G.A.

1994-01-01

There are several aspects of Section III which when compared to process industry codes (ASME VIII, ASME B31.3, API, etc.) have proven to be a significant improvement in engineering practice. There are, however, other aspects of ASME III which have added to costs without clear benefits in safety or reliability. The authors present a user's perspective on some of the relative merits and shortcomings of the nuclear codes (ASME III and XI) compared to the process industry codes (such as ASME VIII, B31.3 and API)

Significant issues and changes for ANSI/ASME OM-1 1981, part 1, ASME OMc code-1994, and ASME OM Code-1995, Appendix I, inservice testing of pressure relief devices in light water reactor power plants

Energy Technology Data Exchange (ETDEWEB)

Seniuk, P.J.

1996-12-01

This paper identifies significant changes to the ANSI/ASME OM-1 1981, Part 1, and ASME Omc Code-1994 and ASME OM Code-1995, Appendix I, {open_quotes}Inservice Testing of Pressure Relief Devices in Light-Water Reactor Power Plants{close_quotes}. The paper describes changes to different Code editions and presents insights into the direction of the code committee and selected topics to be considered by the ASME O&M Working Group on pressure relief devices. These topics include scope issues, thermal relief valve issues, as-found and as-left set-pressure determinations, exclusions from testing, and cold setpoint bench testing. The purpose of this paper is to describe some significant issues being addressed by the O&M Working Group on Pressure Relief Devices (OM-1). The writer is currently the chair of OM-1 and the statements expressed herein represents his personal opinion.

Significant issues and changes for ANSI/ASME OM-1 1981, part 1, ASME OMc code-1994, and ASME OM Code-1995, Appendix I, inservice testing of pressure relief devices in light water reactor power plants

International Nuclear Information System (INIS)

Seniuk, P.J.

1996-01-01

This paper identifies significant changes to the ANSI/ASME OM-1 1981, Part 1, and ASME Omc Code-1994 and ASME OM Code-1995, Appendix I, open-quotes Inservice Testing of Pressure Relief Devices in Light-Water Reactor Power Plantsclose quotes. The paper describes changes to different Code editions and presents insights into the direction of the code committee and selected topics to be considered by the ASME O ampersand M Working Group on pressure relief devices. These topics include scope issues, thermal relief valve issues, as-found and as-left set-pressure determinations, exclusions from testing, and cold setpoint bench testing. The purpose of this paper is to describe some significant issues being addressed by the O ampersand M Working Group on Pressure Relief Devices (OM-1). The writer is currently the chair of OM-1 and the statements expressed herein represents his personal opinion

Application procedures and analysis examples of the SIE ASME-NH program

International Nuclear Information System (INIS)

Kim, Seok Hoon; Koo, G. H.; Kim, J. B.

2010-12-01

In this report, the design rule of the ASME-NH Code was briefly summarized and the application procedures of SIE ASME-NH program were analysed, the analysis examples were described. The SIE ASME-NH program was developed according to the ASME Code Section III Subsection NH rules to perform the primary stress limits, the accumulated inelastic strain limits and the creep fatigue damage evaluations in the structural design of nuclear power plants operating with high temperatures over creep temperature at normal operating conditions. In the analysis examples, the benchmark problem for the high temperature reactor vessel which was discussed in the SIE ASME-NH user's seminar was described. Also, the preliminary structural analysis of an Advanced Burner Test Reactor internal structure was described. Considering the load combinations of the various cycle types submitted from significant operating conditions, the integrity of a reactor internal structure was reviewed according to the stress and strain limits of the ASME-NH rules and the analysis and evaluation results were summarized

ASME nuclear codes and standards risk management strategic plan

International Nuclear Information System (INIS)

Balkey, Kenneth R.

2003-01-01

Over the past 15 years, several risk-informed initiatives have been completed or are under development within the ASME Nuclear Codes and Standards organization. In order to better manage the numerous initiatives in the future, the ASME Board on Nuclear Codes and Standards has recently developed and approved a Risk Management Strategic Plan. This paper presents the latest approved version of the plan beginning with a background of applications completed to date, including the recent issuance of the ASME Standard for Probabilistic Risk Assessment (PRA) for Nuclear Power Plant Applications. The paper discusses potential applications within ASME Nuclear Codes and Standards that may require expansion of the PRA Standard, such as for new generation reactors, or the development of new PRA Standards. A long-term vision for the potential development and evolution to a nuclear systems code that adopts a risk-informed approach across a facility life-cycle (design, construction, operation, maintenance, and closure) is summarized. Finally, near term and long term actions are defined across the ASME Nuclear Codes and Standards organizations related to risk management, and related U.S. regulatory activities are also summarized. (author)

Computer Program of SIE ASME-NH (Revision 1.0) Code

Energy Technology Data Exchange (ETDEWEB)

Koo, Gyeong Hoi; Lee, J. H

2008-01-15

In this report, the SIE ASME (Structural Integrity Evaluations by ASME-NH) (Revision 1.0), which has a computerized implementation of ASME Pressure Vessels and Piping Code Section III Subsection NH rules, is developed to apply to the next generation reactor design subjecting to the elevated temperature operations over 500 .deg. C and over 30 years design lifetime, and the user's manual for this program is described in detail.

Computer Program of SIE ASME-NH (Revision 1.0) Code

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Lee, J. H.

2008-01-01

In this report, the SIE ASME (Structural Integrity Evaluations by ASME-NH) (Revision 1.0), which has a computerized implementation of ASME Pressure Vessels and Piping Code Section III Subsection NH rules, is developed to apply to the next generation reactor design subjecting to the elevated temperature operations over 500 .deg. C and over 30 years design lifetime, and the user's manual for this program is described in detail

Recent development in the ASME O and M committee codes, standards, and guides

International Nuclear Information System (INIS)

Rowley, C.W.

1999-01-01

The ASME O and M Committee continues to expand and update its code, standards, and guides as contained in the ASME OM Code and the ASME OM Standards/Guides. This paper will describe recent changes to these two ASME documents, including technical inquiries, code cases, and the major reformat of the ASME OM Code 1998 Edition. Also two new Parts to the ASME OM S/G will be discussed: OM Part 23 and OM Part 24, which are close to being initially published. A third new Part to the ASME OM S/G has been authorized and has recently started to get organized: Part 26, 'Thermal Calibration of RTDs'. In addition this paper will describe the future plans for these two documents as provided in the O and M Committee Strategic Plan. (author)

Future direction of ASME nuclear codes and standards

International Nuclear Information System (INIS)

Ennis, Kevin; Sheehan, Mark E.

2003-01-01

While the nuclear power industry in the US is in a period of stasis, there continues to be a great deal of activity in the ASME nuclear standards development arena. As plants age, the need for new approaches in standardization changes with the changing needs of the industry. New tools are becoming available in the form of risk analysis, and this is finding its way into more and more of ASME's standards activities. This paper will take a look at the direction that ASME nuclear Codes and Standards are heading in this and other areas, as well as taking a look at some advance reactor concepts and plans for standards to address new technologies

Dynamic fracture toughness of ASME SA508 Class 2a ASME SA533 grade A Class 2 base and heat affected zone material and applicable weld metals

International Nuclear Information System (INIS)

Logsdon, W.A.; Begley, J.A.; Gottshall, C.L.

1978-03-01

The ASME Boiler and Pressure Vessel Code, Section III, Article G-2000, requires that dynamic fracture toughness data be developed for materials with specified minimum yield strengths greater than 50 ksi to provide verification and utilization of the ASME specified minimum reference toughness K/sub IR/ curve. In order to qualify ASME SA508 Class 2a and ASME SA533 Grade A Class 2 pressure vessel steels (minimum yield strengths equal 65 kip/in. 2 and 70 kip/in. 2 , respectively) per this requirement, dynamic fracture toughness tests were performed on these materials. All dynamic fracture toughness values of SA508 Class 2a base and HAZ material, SA533 Grade A Class 2 base and HAZ material, and applicable weld metals exceeded the ASME specified minimum reference toughness K/sub IR/ curve

Penetration of ASM 981 in canine skin: a comparative study.

Science.gov (United States)

Gutzwiller, Meret E Ricklin; Reist, Martin; Persohn, Elke; Peel, John E; Roosje, Petra J

2006-01-01

ASM 981 has been developed for topical treatment of inflammatory skin diseases. It specifically inhibits the production and release of pro-inflammatory cytokines. We measured the skin penetration of ASM 981 in canine skin and compared penetration in living and frozen skin. To make penetration of ASM 981 visible in dog skin, tritium labelled ASM 981 was applied to a living dog and to defrosted skin of the same dog. Using qualitative autoradiography the radioactive molecules were detected in the lumen of the hair follicles until the infundibulum, around the superficial parts of the hair follicles and into a depth of the dermis of 200 to 500 microm. Activity could not be found in deeper parts of the hair follicles, the dermis or in the sebaceous glands. Penetration of ASM 981 is low in canine skin and is only equally spread in the upper third of the dermis 24 hours after application. Penetration in frozen skin takes even longer than in living canine skin but shows the same distribution.

Hydrofluorocarbon (HFC) Scenarios, Climate Effects and the Montreal Protocol

Science.gov (United States)

Velders, G. J. M.; Fahey, D. W.; Daniel, J. S.

2016-12-01

The Montreal Protocol has reduced the use of ozone-depleting substances by more than 95% from its peak levels in the 1980s. As a direct result the use of hydrofluorocarbons (HFCs) as substitute compounds has increased significantly. National regulations to limit HFC use have been adopted recently in the European Union, Japan and USA, and four proposals have been submitted to amend the Montreal Protocol to substantially reduce growth in HFC use. The Parties of the Montreal Protocol have discussed these proposals during their meetings in 2016. The effects of the national regulations and Montreal Protocol amendment proposals on climate forcings and surface temperatures will be presented. Global scenarios of HFC emissions reach 4.0-5.3 GtCO2-eq yr-1 in 2050, which corresponds to a projected growth from 2015 to 2050 which is 9% to 29% of that for CO2 over the same time period. In 2050, in percent of global HFC emissions, China ( 30%), India and the rest of Asia ( 25%), Middle East and northern Africa ( 10%), and USA ( 10%) are the principal source regions; and refrigeration and stationary air conditioning are the major use sectors. Calculated baseline emissions are reduced by 90% in 2050 by implementing the North America Montreal Protocol amendment proposal. This corresponds to a reduction in surface temperature attributed to HFCs from 0.1 oC to 0.04 oC in 2050 and from 0.3-0.4 oC to 0.02 oC in 2100.

ASME factory authorization system and the situation in Japan

International Nuclear Information System (INIS)

Futagawa, Kiyoshi

1978-01-01

Since about three or four years ago, the enterprises of machinery, iron and steel and welding materials in Japan are paying much attention to the acquisition of ASME (American Society of Mechanical Engineers) certificates or authorization to stamp the code symbols. That is, over 70 factories in Japan have undergone ASME examination, and consequently acquired the authorization or certificates. Such authorization is divided into over 20 kinds, of which about 7 are possessed by the companies in Japan. In nuclear field, the kinds of authorization are N (nuclear vessel), NPT (nuclear vessel parts), NV (nuclear vessel safety valve), and MM (material manufacturing). In non-nuclear fields, they are S (power boilers), U (pressure vessels, in Div. 1), and U2 (pressure vessels in Div. 2). The following matters are described: ASME setup, authorization procedures of ASME for factories, the kinds of authorization, factories in Japan holding the authorization or certificates, and renewal of the authorization. (Mori, K.)

Statistical analysis of the ASME KIc database

International Nuclear Information System (INIS)

Sokolov, M.A.

1998-01-01

The American Society of Mechanical Engineers (ASME) K Ic curve is a function of test temperature (T) normalized to a reference nil-ductility temperature, RT NDT , namely, T-RT NDT . It was constructed as the lower boundary to the available K Ic database. Being a lower bound to the unique but limited database, the ASME K Ic curve concept does not discuss probability matters. However, a continuing evolution of fracture mechanics advances has led to employment of the Weibull distribution function to model the scatter of fracture toughness values in the transition range. The Weibull statistic/master curve approach was applied to analyze the current ASME K Ic database. It is shown that the Weibull distribution function models the scatter in K Ic data from different materials very well, while the temperature dependence is described by the master curve. Probabilistic-based tolerance-bound curves are suggested to describe lower-bound K Ic values

ASME nuclear codes and standards: Scope of coverage and current initiatives

International Nuclear Information System (INIS)

Eisenberg, G. M.

1995-01-01

The objective of this paper is to address the broad scope of coverage of nuclear codes, standards and guides produced and administered by the American Society of Mechanical Engineers (ASME). Background information is provided regarding the evolution of the present activities. Details are provided on current initiatives intended to permit ASME to meet the needs of a changing nuclear industry on a worldwide scale. During the early years of commercial nuclear power, ASME produced a code for the construction of nuclear vessels used in the reactor coolant pressure boundary, containment and auxiliary systems. In response to industry growth, ASME Code coverage soon broadened to include rules for construction of other nuclear components, and inservice inspection of nuclear reactor coolant systems. In the years following this, the scope of ASME nuclear codes, standards and guides has been broadened significantly to include air cleaning activities for nuclear power reactors, operation and maintenance of nuclear power plants, quality assurance programs, cranes for nuclear facilities, qualification of mechanical equipment, and concrete reactor vessels and containments. ASME focuses on globalization of its codes, standards and guides by encouraging and promoting their use in the international community and by actively seeking participation of international members on its technical and supervisory committees and in accreditation activities. Details are provided on current international representation. Initiatives are underway to separate the technical requirements from administrative and enforcement requirements, to convert to hard metric units, to provide for non-U. S. materials, and to provide for translations into non-English languages. ASME activity as an accredited ISO 9000 registrar for suppliers of mechanical equipment is described. Rules are being developed for construction of containment systems for nuclear spent fuel and high-level waste transport packagings. Intensive

Highlights of proposed changes to ANSI/ASME N509-80

International Nuclear Information System (INIS)

Ornberg, S.C.

1987-01-01

The ASME Committee on Nuclear Air and Gas Treatment (CONAGT) are at the time of this writing considering performing maintenance revisions of ANSI N509 and N510 based on the results of a required 5-year review and comments received from users of the standards at workshops and through inquiries. This paper discusses the highlights of the significant revisions to ANSI/ASME N509 and explains the reasons for the changes. It should be emphasized that these revisions are not yet approved by ASME CONAGT, the board of Nuclear Codes and Standards, or ANSI

Equilíbrio corporal em crianças e adolescentes asmáticos e não asmáticos

Directory of Open Access Journals (Sweden)

Marta Cristina Rodrigues da Silva

2013-06-01

Full Text Available O objetivo foi analisar e comparar o equilíbrio corporal em crianças e adolescentes asmáticos e não asmáticos. Fizeram parte do grupo de estudos 24 sujeitos com idades de 7 a 14 anos divididos em dois grupos: grupo asmático e grupo controle. Para avaliação do equilíbrio corporal utilizou-se uma plataforma de força. Foram utilizadas as condições, olhos abertos e fechados com três tentativas aleatórias, com duração de 30 segundos cada uma. Os resultados apontaram diferença significativa entre os grupos, no teste de equilíbrio com olhos abertos apresentando maior amplitude de deslocamento na direção ântero-posterior (COPap (p = 0,04, e médio lateral (COPml (p = 0,02 no grupo asmático. Enquanto que no teste com olhos fechados a diferença foi significante apenas na amplitude de deslocamento ântero-posterior (COPap (p = 0,02 e Área de Elipse (p=0,03. Desse modo, a asma com suas limitações e consequências parece influenciar negativamente no equilíbrio corporal de seus portadores quando comparados com crianças sem a patologia e da mesma faixa etária.

Montreal Protocol Benefits simulated with CCM SOCOL

Directory of Open Access Journals (Sweden)

T. Egorova

2013-04-01

Full Text Available Ozone depletion is caused by the anthropogenic increase of halogen-containing species in the atmosphere, which results in the enhancement of the concentration of reactive chlorine and bromine in the stratosphere. To reduce the influence of anthropogenic ozone-depleting substances (ODS, the Montreal Protocol was agreed by Governments in 1987, with several Amendments and Adjustments adopted later. In order to assess the benefits of the Montreal Protocol and its Amendments and Adjustments (MPA on ozone and UV radiation, two different runs of the chemistry-climate model (CCM SOCOL have been carried out. The first run was driven by the emission of ozone depleting substances (ODS prescribed according to the restrictions of the MPA. For the second run we allow the ODS to grow by 3% annually. We find that the MPA would have saved up to 80% of the global annual total ozone by the end of the 21st century. Our calculations also show substantial changes of the stratospheric circulation pattern as well as in surface temperature and precipitations that could occur in the world without MPA implementations. To illustrate the changes in UV radiation at the surface and to emphasise certain features, which can only be seen for some particular regions if the influence of the cloud cover changes is accounted for, we calculate geographical distribution of the erythemally weighted irradiance (Eery. For the no Montreal Protocol simulation Eery increases by factor of 4 to 16 between the 1970s and 2100. For the scenario including the Montreal Protocol it is found that UV radiation starts to decrease in 2000, with continuous decline of 5% to 10% at middle latitudes in the both Northern and Southern Hemispheres.

UV Impacts Avoided by the Montreal Protocol

Science.gov (United States)

Newman, Paul; McKenzie, Richard

2010-01-01

Temporal and geographical variabilities in the future "World Expected" UV environment are compared with the "World Avoided", which would have occurred without the Montreal Protocol on protection of the ozone layer and its subsequent amendments and adjustments. Based on calculations of clear-sky UV irradiances, the effects of the Montreal Protocol have been hugely beneficial to avoid the health risks, such as skin cancer, which are associated with high UV, while there is only a small increase in health risks, such as vitamin D deficiency, that are associated with low UV. However, interactions with climate change may lead to changes in cloud and albedo, and possibly behavioural changes which could also be important.

SDZ ASM 981: an emerging safe and effective treatment for atopic dermatitis.

Science.gov (United States)

Luger, T; Van Leent, E J; Graeber, M; Hedgecock, S; Thurston, M; Kandra, A; Berth-Jones, J; Bjerke, J; Christophers, E; Knop, J; Knulst, A C; Morren, M; Morris, A; Reitamo, S; Roed-Petersen, J; Schoepf, E; Thestrup-Pedersen, K; Van Der Valk, P G; Bos, J D

2001-04-01

SDZ ASM 981 is a selective inhibitor of the production of pro-inflammatory cytokines from T cells and mast cells in vitro. It is the first ascomycin macrolactam derivative under development for the treatment of inflammatory skin diseases. This study was designed to determine the safety and efficacy of SDZ ASM 981 cream at concentrations of 0.05%, 0.2%, 0.6% and 1.0% in the treatment of patients with atopic dermatitis and to select the concentration to be used in phase III studies. This was a double-blind, randomized, parallel-group, multicentre dose-finding study. A total of 260 patients were randomly assigned to treatment with SDZ ASM 981 cream at concentrations of 0.05%, 0.2%, 0.6%, or 1.0%, matching vehicle cream, or the internal control 0.1% betamethasone-17-valerate cream (BMV). Treatment was given twice daily for up to 3 weeks. A clear dose-response relationship for SDZ ASM 981 was evident, with 0.2%, 0.6% and 1.0% SDZ ASM 981 creams all being significantly more effective than vehicle (P = 0.041, 0.001 and 0.008, respectively) in terms of baseline to end-point changes in the Eczema Area Severity Index (EASI) and pruritus score. The 1.0% cream was the most effective SDZ ASM 981 concentration. BMV was more effective than the SDZ ASM 981 creams tested in this study. It appears that the efficacy plateau was not reached with the SDZ ASM 981 creams within 3 weeks treatment. SDZ ASM 981 was well tolerated. Burning or a feeling of warmth were the only adverse events reported more frequently in the 0.6% and 1.0% SDZ ASM 981 treatment groups than in the vehicle treatment group (42.9%, 48.9% and 34.9%, respectively). Few systemic adverse events were reported during the study (headache was the most frequent systemic event reported by 15 of 252 patients) and none was considered to be related to treatment. The local tolerability profile of the 1.0% cream was similar to that of the lower concentrations. 1.0% SDZ ASM 981 cream, which was shown to be safe, well tolerated and

Consideration of the Construction Code for TBM-body in ASME BPVC

International Nuclear Information System (INIS)

Kim, Dongjun; Kim, Yunjae; Kim, Suk Kwon; Park, Sung Dae; Lee, Dong Won

2016-01-01

In this paper, ASME code is briefly introduced, and the TBM-body is classified for selecting the ASME section. With the classification of TBM-body, the appropriate section is determined. Helium Cooled Ceramic Reflector (HCCR) Test Blanket System (TBS) has been designed to research on the functions of breeding blanket by KO TBM team. The functions has three subjects as 1) Tritium breeding, 2) Heat conversion and extraction, and 3) Neutron and Gamma-ray shielding. For the process of design, it is needed to select the appropriate construction code as the design criteria. ITER Organization (IO) has proposed that RCC-MR Edition 2007 ver. shall be used for TBM-shield. Because the TBM-shield is connected to the vacuum boundary. For the other part of TBM-set, TBM-body, there is no constraint on the selected code, and the manufacturer can appropriately select the construction code to apply design and fabrication parts. KO TBM Team has considered whether it is appropriate to choose any code for TBM-body. One of the things is ASME code. The advantage of ASME choice is suitable to the domestic status. In the domestic nuclear plant, ASME or KEPIC code is used as regulatory requirements. Based on this, it is possible to prepare a domestic fusion plant regulatory. In this paper, the construction code of TBM-body was determined in ASME BPVC. For the determination of code, the structure of ASME BPVC was introduced and the classification for TBM-body was conducted by the ITER criteria. And the operation conditions of TBM-body that contained creep and irradiation effects was considered to determine the construction code

Consideration of the Construction Code for TBM-body in ASME BPVC

Energy Technology Data Exchange (ETDEWEB)

Kim, Dongjun; Kim, Yunjae [Korea Univ., Seoul (Korea, Republic of); Kim, Suk Kwon; Park, Sung Dae; Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this paper, ASME code is briefly introduced, and the TBM-body is classified for selecting the ASME section. With the classification of TBM-body, the appropriate section is determined. Helium Cooled Ceramic Reflector (HCCR) Test Blanket System (TBS) has been designed to research on the functions of breeding blanket by KO TBM team. The functions has three subjects as 1) Tritium breeding, 2) Heat conversion and extraction, and 3) Neutron and Gamma-ray shielding. For the process of design, it is needed to select the appropriate construction code as the design criteria. ITER Organization (IO) has proposed that RCC-MR Edition 2007 ver. shall be used for TBM-shield. Because the TBM-shield is connected to the vacuum boundary. For the other part of TBM-set, TBM-body, there is no constraint on the selected code, and the manufacturer can appropriately select the construction code to apply design and fabrication parts. KO TBM Team has considered whether it is appropriate to choose any code for TBM-body. One of the things is ASME code. The advantage of ASME choice is suitable to the domestic status. In the domestic nuclear plant, ASME or KEPIC code is used as regulatory requirements. Based on this, it is possible to prepare a domestic fusion plant regulatory. In this paper, the construction code of TBM-body was determined in ASME BPVC. For the determination of code, the structure of ASME BPVC was introduced and the classification for TBM-body was conducted by the ITER criteria. And the operation conditions of TBM-body that contained creep and irradiation effects was considered to determine the construction code.

ASME nuclear codes and standards: Recent technical initiatives

International Nuclear Information System (INIS)

Feigel, R. E.

1995-01-01

Although nuclear power construction is currently in a hiatus in the US, ASME and its volunteer committees remain committed to continual improvements in the technical requirements in its nuclear codes. This paper provides an overview of several significant recent revisions to ASME' s nuclear codes. Additionally, other important initiatives currently being addressed by ASME committees will be described. With the largest population of operating light water nuclear plants in the world and worldwide use of its nuclear codes, ASME continues to support technical advancements in its nuclear codes and standards. While revisions of various magnitude are an ongoing process, several recent revisions embody significant changes based on state of the art design philosophy and substantial industry experience. In the design area, a significant revisions has recently been approved which will significantly reduce conservatisms in seismic piping design as well as provide simplified design rules. Major revisions have also been made to the requirements for nuclear material manufacturers and suppliers, which should result in clearer understanding of this difficult administrative area of the code. In the area of Section XI inservice rules, substantial studies are underway to investigate the application of probabilistic, risked based inspection in lieu of the current deterministic inspection philosophy. While much work still is required in this area, it is an important potential application of the emerging field of risk based inspection

ASME Code Efforts Supporting HTGRs

Energy Technology Data Exchange (ETDEWEB)

D.K. Morton

2012-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

ASME Code Efforts Supporting HTGRs

Energy Technology Data Exchange (ETDEWEB)

D.K. Morton

2011-09-01

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

Analysis of the Current Technical Issues on ASME Code and Standard for Nuclear Mechanical Design(2009)

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Lee, B. S.; Yoo, S. H.

2009-11-01

This report describes the analysis on the current revision movement related to the mechanical design issues of the U.S ASME nuclear code and standard. ASME nuclear mechanical design in this report is composed of the nuclear material, primary system, secondary system and high temperature reactor. This report includes the countermeasures based on the ASME Code meeting for current issues of each major field. KAMC(ASME Mirror Committee) of this project is willing to reflect a standpoint of the domestic nuclear industry on ASME nuclear mechanical design and play a technical bridge role for the domestic nuclear industry in ASME Codes application

Analysis of the Current Technical Issues on ASME Code and Standard for Nuclear Mechanical Design(2009)

Energy Technology Data Exchange (ETDEWEB)

Koo, Gyeong Hoi; Lee, B. S.; Yoo, S. H.

2009-11-15

This report describes the analysis on the current revision movement related to the mechanical design issues of the U.S ASME nuclear code and standard. ASME nuclear mechanical design in this report is composed of the nuclear material, primary system, secondary system and high temperature reactor. This report includes the countermeasures based on the ASME Code meeting for current issues of each major field. KAMC(ASME Mirror Committee) of this project is willing to reflect a standpoint of the domestic nuclear industry on ASME nuclear mechanical design and play a technical bridge role for the domestic nuclear industry in ASME Codes application

GC-ASM: Synergistic Integration of Graph-Cut and Active Shape Model Strategies for Medical Image Segmentation.

Science.gov (United States)

Chen, Xinjian; Udupa, Jayaram K; Alavi, Abass; Torigian, Drew A

2013-05-01

Image segmentation methods may be classified into two categories: purely image based and model based. Each of these two classes has its own advantages and disadvantages. In this paper, we propose a novel synergistic combination of the image based graph-cut (GC) method with the model based ASM method to arrive at the GC-ASM method for medical image segmentation. A multi-object GC cost function is proposed which effectively integrates the ASM shape information into the GC framework. The proposed method consists of two phases: model building and segmentation. In the model building phase, the ASM model is built and the parameters of the GC are estimated. The segmentation phase consists of two main steps: initialization (recognition) and delineation. For initialization, an automatic method is proposed which estimates the pose (translation, orientation, and scale) of the model, and obtains a rough segmentation result which also provides the shape information for the GC method. For delineation, an iterative GC-ASM algorithm is proposed which performs finer delineation based on the initialization results. The proposed methods are implemented to operate on 2D images and evaluated on clinical chest CT, abdominal CT, and foot MRI data sets. The results show the following: (a) An overall delineation accuracy of TPVF > 96%, FPVF ASM for different objects, modalities, and body regions. (b) GC-ASM improves over ASM in its accuracy and precision to search region. (c) GC-ASM requires far fewer landmarks (about 1/3 of ASM) than ASM. (d) GC-ASM achieves full automation in the segmentation step compared to GC which requires seed specification and improves on the accuracy of GC. (e) One disadvantage of GC-ASM is its increased computational expense owing to the iterative nature of the algorithm.

Operating nuclear plant feedback to ASME and French codes

International Nuclear Information System (INIS)

Journet, J.; O'Donnell, W.J.

1996-01-01

The French have an advantage in nuclear plant operating experience feedback due to the highly centralized nature of their nuclear industry. There is only one utility in charge of design as well as operations (EDF) and only one reactor vendor (Framatome). The ASME Code has played a key role in resolving technical issues in the design and operation of nuclear plants since the inception of nuclear power. The committee structure of the Code brings an ideal combination of senior technical people with both broad and specialized experience to bear on complex how safe is safe enough technical issues. The authors now see an even greater role for the ASME Code in a proposed new regulatory era for the US nuclear industry. The current legalistic confrontational regulatory era has been quite destructive. There now appears to be a real opportunity to begin a new era of technical consensus as the primary means for resolving safety issues. This change can quickly be brought about by having the industry take operating plant problems and regulatory technical issues directly to the ASME Code for timely resolution. Surprisingly, there is no institution in the US nuclear industry with such a mandate. In fact, the industry is organized to feedback through the Nuclear Regulatory Commission issues which could be far better resolved through the ASME Code. Major regulatory benefits can be achieved by closing this loop and providing systematic interaction with the ASME Code. The essential elements of a new regulatory era and ideas for organizing US institutional industry responsibilities, taken from the French experience, are described in this paper

ASME method for particle reconstruction

International Nuclear Information System (INIS)

Ierusalimov, A.P.

2009-01-01

The method of approximate solution of motion equation (ASME) was used to reconstruct the parameters for charged particles. It provides a good precision for momentum, angular and space parameters of particles in coordinate detectors. The application of the method for CBM, HADES and MPD/NICA setups is discussed

Regulatory Endorsement Activities for ASME Nuclear Codes and Standards

International Nuclear Information System (INIS)

West, Raymond A.

2006-01-01

The ASME Board on Nuclear Codes and Standards (BNCS) has formed a Task Group on Regulatory Endorsement (TG-RE) that is currently in discussions with the United States Nuclear Regulatory Commission (NRC) to look at suggestions and recommendations that can be used to help with the endorsement of new and revised ASME Nuclear Codes and Standards (NC and S). With the coming of new reactors in the USA in the very near future we need to look at both the regulations and all the ASME NC and S to determine where we need to make changes to support these new plants. At the same time it is important that we maintain our operating plants while addressing ageing management needs of our existing reactors. This is going to take new thinking, time, resources, and money. For all this to take place the regulations and requirements that we use must be clear concise and necessary for safety and to that end both the NRC and ASME are working together to make this happen. Because of the influence that the USA has in the world in dealing with these issues, this paper is written to inform the international nuclear engineering community about the issues and what actions are being addressed under this effort. (author)

Integrin and GPCR Crosstalk in the Regulation of ASM Contraction Signaling in Asthma.

Science.gov (United States)

Teoh, Chun Ming; Tam, John Kit Chung; Tran, Thai

2012-01-01

Airway hyperresponsiveness (AHR) is one of the cardinal features of asthma. Contraction of airway smooth muscle (ASM) cells that line the airway wall is thought to influence aspects of AHR, resulting in excessive narrowing or occlusion of the airway. ASM contraction is primarily controlled by agonists that bind G protein-coupled receptor (GPCR), which are expressed on ASM. Integrins also play a role in regulating ASM contraction signaling. As therapies for asthma are based on symptom relief, better understanding of the crosstalk between GPCRs and integrins holds good promise for the design of more effective therapies that target the underlying cellular and molecular mechanism that governs AHR. In this paper, we will review current knowledge about integrins and GPCRs in their regulation of ASM contraction signaling and discuss the emerging concept of crosstalk between the two and the implication of this crosstalk on the development of agents that target AHR.

The Importance of the Montreal Protocol in Protecting the Earth's Hydroclimate

Science.gov (United States)

Seager, R.; Wu, Y.; Polvani, L. M.

2012-12-01

The 1987 Montreal Protocol regulating emissions of ozone depleting chlorofluorocarbons (CFCs) was motivated primarily by the harm to human health and ecosystems arising from increased exposure to ultraviolet-B (UV-B) radiation associated with depletion from the ozone layer. It is now known that the Montreal Protocol has reduced global warming since CFCs are greenhouse gases (GHGs). In this paper we show that the Montreal Protocol also significantly protects the Earth's hydroclimate, even though this was also not a motivating factor in the decision-making that led to the Protocol. General Circulation Model (GCM) results show that in the coming decade (2020-29), under the 'World Avoided' scenario of no regulations on CFC emissions, the subtropical dry zones would in general get drier, and the middle and high latitude regions wetter. This change is similar, in both pattern and magnitude, to that in the coming decade caused by projected increases in carbon dioxide concentrations. This implies that because of the Montreal Protocol, and the ozone depletion and global warming associated with CFCs thus avoided, the hydrological cycle changes in the coming decade will be significantly less than what they otherwise would have been.

Risk-informed technology developments for nuclear power plants within the ASME in 2000-2001

International Nuclear Information System (INIS)

Wesley Rowley, C.; Balkey, K.R.

2001-01-01

The purpose of this paper is to provide information on developments within the ASME to support risk-informing NRC regulations for nuclear power plants. This paper builds on a publication at ICONE-8 that discussed ASME risk-informed nuclear power plant initiatives, both in Research and in Codes and Standards, particularly those related to risk-informing Part 50 of the 10 CFR (Code of federal regulations). During the past year, the ASME BNCS formed a Task Force to focus the Society's efforts to support risk-informing 10 CFR Part 50. Key efforts underway that are guided by the task force include finalizing the ASME PRA (probability risk assessment) Standard, developing a Code Case to risk-inform the repair, replacement, and modification activities for ASME components, and developing a Code Case to risk-inform the safety classification of pressure boundary components. Several other initiatives are also under investigation such as introducing risk insights into other ASME nuclear codes and standards supported by appropriate research and technical basis information. Supplementary information will also be provided to update an initial high level plan of ASME risk-informed initiatives for nuclear power plants that was presented at ICONE-8, including plans to communicate these risk-informed technology developments to the public. The authors included and acknowledged contributions from several other cognizant members of the ASME BNCS (board on nuclear codes standards) Task Group on RIP50 in the paper. (authors)

Seismic Vulnerability Assessment for Montreal -An Application of HAZUS-MH4

Science.gov (United States)

Yu, Keyan

2011-12-01

Seismic loss estimation for Montreal, Canada is performed for a 2% in 50 years seismic hazard using the HAZUS-MH4 tool developed by US Federal Emergency Management. The software is manipulated to accept a Canadian setting for the Montreal study region, which includes 522 census tracts. The accuracy of loss estimations using HAZUS is dependent on the quality and quantity of data collection and preparation. The data collected for Montreal study region comprise: (1) the building inventory (2) hazard maps regarding soil amplification, liquefaction, and landslides (3) population distribution at three different times of the day (4) census demographic information and (5) synthetic ground motion contour maps using three different ground motion prediction equations. All these data are prepared and assembled into geodatabases that are compatible with the HAZUS software. The study estimated that roughly 5% of the building stock would be damaged with direct economic losses evaluated at 1.4 billion dollars for a scenario corresponding to the 2% in 50 years scenario. The maximum number of casualties associated with this scenario corresponds to a time of occurrence of 2pm and would result in approximately 500 people being injured. Epistemic uncertainty was considered by obtaining damage estimates for three attenuation functions that were developed for Eastern North America. The results indicate that loss estimates are highly sensitive to the choice of the attenuation function and suggests that epistemic uncertainty should be considered both for the definition of the hazard function and in loss estimation methodologies. The next steps in the study should be to increase the size of the survey area to the Greater Montreal which includes more than 3 million inhabitants and to perform more targeted studies for critical areas such as downtown Montreal, and the south-eastern tip of Montreal. The current study was performed mainly for the built environment; the next phase will need to

Inhibition of allergen-induced basophil activation by ASM-024, a nicotinic receptor ligand.

Science.gov (United States)

Watson, Brittany M; Oliveria, John Paul; Nusca, Graeme M; Smith, Steven G; Beaudin, Sue; Dua, Benny; Watson, Rick M; Assayag, Evelynne Israël; Cormier, Yvon F; Sehmi, Roma; Gauvreau, Gail M

2014-01-01

Nicotinic acetylcholine receptors (nAChRs) were identified on eosinophils and shown to regulate inflammatory responses, but nAChR expression on basophils has not been explored yet. We investigated surface receptor expression of nAChR α4, α7 and α1/α3/α5 subunits on basophils. Furthermore, we examined the effects of ASM-024, a synthetic nicotinic ligand, on in vitro anti-IgE and in vivo allergen-induced basophil activation. Basophils were enriched from the peripheral blood of allergic donors and the expression of nAChR subunits and muscarinic receptors was determined. Purified basophils were stimulated with anti-IgE in the presence of ASM-024 with or without muscarinic or nicotinic antagonists for the measurement of CD203c expression and histamine release. The effect of 9 days of treatment with 50 and 200 mg ASM-024 on basophil CD203c expression was examined in the blood of mild allergic asthmatics before and after allergen inhalation challenge. nAChR α4, α7 and α1/α3/α5 receptor subunit expression was detected on basophils. Stimulation of basophils with anti-IgE increased CD203c expression and histamine release, which was inhibited by ASM-024 (10(-5) to 10(-)(3) M, p ASM-024 was reversed in the presence of muscarinic and nicotinic antagonists. In subjects with mild asthma, ASM-024 inhalation significantly inhibited basophil CD203c expression measured 24 h after allergen challenge (p = 0.03). This study shows that ASM-024 inhibits IgE- and allergen-induced basophil activation through both nicotinic and muscarinic receptors, and suggests that ASM-024 may be an efficacious agent for modulating allergic asthma responses. © 2015 S. Karger AG, Basel.

Acid Sphingomyelinase (ASM) is a Negative Regulator of Regulatory T Cell (Treg) Development.

Science.gov (United States)

Zhou, Yuetao; Salker, Madhuri S; Walker, Britta; Münzer, Patrick; Borst, Oliver; Gawaz, Meinrad; Gulbins, Erich; Singh, Yogesh; Lang, Florian

2016-01-01

Regulatory T cell (Treg) is required for the maintenance of tolerance to various tissue antigens and to protect the host from autoimmune disorders. However, Treg may, indirectly, support cancer progression and bacterial infections. Therefore, a balance of Treg function is pivotal for adequate immune responses. Acid sphingomyelinase (ASM) is a rate limiting enzyme involved in the production of ceramide by breaking down sphingomyelin. Previous studies in T-cells have suggested that ASM is involved in CD28 signalling, T lymphocyte granule secretion, degranulation, and vesicle shedding similar to the formation of phosphatidylserine-exposing microparticles from glial cells. However, whether ASM affects the development of Treg has not yet been described. Splenocytes, isolated Naive T lymphocytes and cultured T cells were characterized for various immune T cell markers by flow cytometery. Cell proliferation was measured by Carboxyfluorescein succinimidyl ester (CFSE) dye, cell cycle analysis by Propidium Iodide (PI), mRNA transcripts by q-RT PCR and protein expression by Western Blotting respectively. ASM deficient mice have higher number of Treg compared with littermate control mice. In vitro induction of ASM deficient T cells in the presence of TGF-β and IL-2 lead to a significantly higher number of Foxp3+ induced Treg (iTreg) compared with control T-cells. Further, ASM deficient iTreg has less AKT (serine 473) phosphorylation and Rictor levels compared with control iTreg. Ceramide C6 led to significant reduction of iTreg in both ASM deficient and WT mice. The reduction in iTreg leads to induction of IL-1β, IL-6 and IL-17 but not IFN-γ mRNA levels. ASM is a negative regulator of natural and iTreg. © 2016 The Author(s) Published by S. Karger AG, Basel.

The Montreal Protocol treaty and its illuminating history of science-policy decision-making

Science.gov (United States)

Grady, C.

2017-12-01

The Montreal Protocol on Substances that Deplete the Ozone Layer, hailed as one of the most effective environmental treaties of all time, has a thirty year history of science-policy decision-making. The partnership between Parties to the Montreal Protocol and its technical assessment panels serve as a basis for understanding successes and evaluating stumbles of global environmental decision-making. Real-world environmental treaty negotiations can be highly time-sensitive, politically motivated, and resource constrained thus scientists and policymakers alike are often unable to confront the uncertainties associated with the multitude of choices. The science-policy relationship built within the framework of the Montreal Protocol has helped constrain uncertainty and inform policy decisions but has also highlighted the limitations of the use of scientific understanding in political decision-making. This talk will describe the evolution of the scientist-policymaker relationship over the history of the Montreal Protocol. Examples will illustrate how the Montreal Protocol's technical panels inform decisions of the country governments and will characterize different approaches pursued by different countries with a particular focus on the recently adopted Kigali Amendment. In addition, this talk will take a deeper dive with an analysis of the historic technical panel assessments on estimating financial resources necessary to enable compliance to the Montreal Protocol compared to the political financial decisions made through the Protocol's Multilateral Fund replenishment negotiation process. Finally, this talk will describe the useful lessons and challenges from these interactions and how they may be applicable in other environmental management frameworks across multiple scales under changing climatic conditions.

ASM-024, a piperazinium compound, promotes the in vitro relaxation of β2-adrenoreceptor desensitized tracheas.

Science.gov (United States)

Israël-Assayag, Evelyne; Beaulieu, Marie-Josée; Cormier, Yvon

2015-01-01

Inhaled β2-adrenoreceptor agonists are widely used in asthma and chronic obstructive pulmonary disease (COPD) for bronchoconstriction relief. β2-Adrenoreceptor agonists relax airway smooth muscle cells via cyclic adenosine monophosphate (cAMP) mediated pathways. However, prolonged stimulation induces functional desensitization of the β2-adrenoreceptors (β2-AR), potentially leading to reduced clinical efficacy with chronic or prolonged administration. ASM-024, a small synthetic molecule in clinical stage development, has shown activity at the level of nicotinic receptors and possibly at the muscarinic level and presents anti-inflammatory and bronchodilator properties. Aerosolized ASM-024 reduces airway resistance in mice and promotes in-vitro relaxation of tracheal and bronchial preparations from animal and human tissues. ASM-024 increased in vitro relaxation response to maximally effective concentration of short-acting beta-2 agonists in dog and human bronchi. Although the precise mechanisms by which ASM-024 promotes airway smooth muscle (ASM) relaxation remain unclear, we hypothesized that ASM-024 will attenuate and/or abrogate agonist-induced contraction and remain effective despite β2-AR tachyphylaxis. β2-AR tachyphylaxis was induced with salbutamol, salmeterol and formoterol on guinea pig tracheas. The addition of ASM-024 relaxed concentration-dependently intact or β2-AR desensitized tracheal rings precontracted with methacholine. ASM-024 did not induce any elevation of intracellular cAMP in isolated smooth muscle cells; moreover, blockade of the cAMP pathway with an adenylate cyclase inhibitor had no significant effect on ASM-024-induced guinea pig trachea relaxation. Collectively, these findings show that ASM-024 elicits relaxation of β2-AR desensitized tracheal preparations and suggest that ASM-024 mediates smooth muscle relaxation through a different target and signaling pathway than β2-adrenergic receptor agonists. These findings suggest ASM-024

Tuberculosis and homelessness in Montreal: a retrospective cohort study

Science.gov (United States)

2011-01-01

Background Montreal is Canada's second-largest city, where mean annual tuberculosis (TB) incidence from 1996 to 2007 was 8.9/100,000. The objectives of this study were to describe the epidemiology of TB among homeless persons in Montreal and assess patterns of transmission and sharing of key locations. Methods We reviewed demographic, clinical, and microbiologic data for all active TB cases reported in Montreal from 1996 to 2007 and identified persons who were homeless in the year prior to TB diagnosis. We genotyped all available Mycobacterium tuberculosis isolates by IS6110 restriction fragment length polymorphism (IS6110-RFLP) and spoligotyping, and used a geographic information system to identify potential locations for transmission between persons with matching isolates. Results There were 20 cases of TB in homeless persons, out of 1823 total reported from 1996-2007. 17/20 were Canadian-born, including 5 Aboriginals. Homeless persons were more likely than non-homeless persons to have pulmonary TB (20/20), smear-positive disease (17/20, odds ratio (OR) = 5.7, 95% confidence interval (CI): 1.7-20), HIV co-infection (12/20, OR = 14, 95%CI: 4.8-40), and a history of substance use. The median duration from symptom onset to diagnosis was 61 days for homeless persons vs. 28 days for non-homeless persons (P = 0.022). Eleven homeless persons with TB belonged to genotype-defined clusters (OR = 5.4, 95%CI: 2.2-13), and ten potential locations for transmission were identified, including health care facilities, homeless shelters/drop-in centres, and an Aboriginal community centre. Conclusions TB cases among homeless persons in Montreal raise concerns about delayed diagnosis and ongoing local transmission. PMID:22034944

Analysis of preservice inspection relief requests and recommendations for ASME code changes

International Nuclear Information System (INIS)

Cook, J.F.

1985-05-01

NRC regulations require that preservice inspection (PSI) of nuclear plants be performed in accordance with referenced editions and addenda of Division 1 rules of Section XI, ''Rules for Inservice Inspection of Nuclear Power Plant Components'', of the ASME Boiler and Pressure Vessel Code (ASME Code). The regulations permit applicants to request and obtain relief from the NRC from specific ASME Code requirements that are determined to be impractical. Applicant requests for relief from preservice inspection (PSI) requirements were compiled and analyzed. From this data, covering a total of 178 relief requests, common problems with examination requirements were identified. Changes to examination requirements to solve selected problems are proposed. By following later ASME Code requirements, 46 out of the 178 relief requests can be eliminated. Implementing proposed Code changes would eliminate another 25 relief requests, leaving 107 relief requests out of the original 178 relief requests covered by this survey

Evaluation of practicality of ASME code, Section XI

International Nuclear Information System (INIS)

Mattu, R.K.; Lauderdale, J.R.; Liu, S.N.; Lance, J.J.

2004-01-01

Many nuclear power plants have found that it is impractical or unduly burdensome to comply with some ASME Boiler and Pressure Code provisions and have sought relief from those provisions from the Nuclear Regulatory Commission. An Electric Power Research Institute (EPRI) project is evaluating such Code provisions and alternatives to them that will meet the safety intent of the Code with less burden on utilities. The methodology is to extract data from an on-line data base of relief requests since 1980, analyse the data to identify burdensome provisions for which there are satisfactory alternatives, and recommend changes in the Code to the ASME. (author)

Protocolos de Montreal e Kyoto: pontos em comum e diferenças fundamentais Montreal and Kyoto Protocols: common points and essential differences

Directory of Open Access Journals (Sweden)

Darly Henriques da Silva

2009-12-01

Full Text Available Os Protocolos de Montreal e Kyoto, tratados internacionais de defesa do meio ambiente e da vida, controlam gases que provocam o buraco na camada de ozônio e o efeito estufa, respectivamente, resultantes de atividades industriais e uso da terra. O artigo enfatiza pontos comuns e diferenças entre eles, fornecendo atualização dos protocolos.Montreal and Kyoto Protocols, international treaties, aim at safeguarding the environment and life by controlling the use of gases which deplete the ozone layer and cause the greenhouse effect, respectively, due to industrial and land use activities. The article highlights common points and differences and provides an update discussion about the protocols.

NIST/ASME Steam Properties Database

Science.gov (United States)

SRD 10 NIST/ASME Steam Properties Database (PC database for purchase)   Based upon the International Association for the Properties of Water and Steam (IAPWS) 1995 formulation for the thermodynamic properties of water and the most recent IAPWS formulations for transport and other properties, this updated version provides water properties over a wide range of conditions according to the accepted international standards.

High Level Analysis, Design and Validation of Distributed Mobile Systems with CoreASM

Science.gov (United States)

Farahbod, R.; Glässer, U.; Jackson, P. J.; Vajihollahi, M.

System design is a creative activity calling for abstract models that facilitate reasoning about the key system attributes (desired requirements and resulting properties) so as to ensure these attributes are properly established prior to actually building a system. We explore here the practical side of using the abstract state machine (ASM) formalism in combination with the CoreASM open source tool environment for high-level design and experimental validation of complex distributed systems. Emphasizing the early phases of the design process, a guiding principle is to support freedom of experimentation by minimizing the need for encoding. CoreASM has been developed and tested building on a broad scope of applications, spanning computational criminology, maritime surveillance and situation analysis. We critically reexamine here the CoreASM project in light of three different application scenarios.

Estimates of margins in ASME Code strength values for stainless steel nuclear piping

International Nuclear Information System (INIS)

Ware, A.G.

1995-01-01

The margins in the ASME Code stainless steel allowable stress values that can be attributed to the variations in material strength are evaluated for nuclear piping steels. Best-fit curves were calculated for the material test data that were used to determine allowable stress values for stainless steels in the ASME Code, supplemented by more recent data, to estimate the mean stresses. The mean yield stresses (on which the stainless steel S m values are based) from the test data are about 15 to 20% greater than the ASME Code yield stress values. The ASME Code yield stress values are estimated to approximately coincide with the 97% confidence limit from the test data. The mean and 97% confidence limit values can be used in the probabilistic risk assessments of nuclear piping

A comparative study for SMART steam generator sizing based on ASME and Russian standard

International Nuclear Information System (INIS)

Kim, Y. W.; Kim, J. I.; Jang, M. H.

2000-01-01

A systematic comparison of ASME and Russian standard with respect to the design of SMART steam generator has been carried out. Classification of allowable stress in the Russian standard is quite different from that of ASME. Allowable stress of Russian standard and stress intensity defined in ASME were compared for various steam generator tube material as a function of design temperature. Equations and methodology of determining the thickness for the important parts of steam generator have been analyzed. For the tube subjected to internal and/or external pressure, Russian standard use the same equation in the sizing of tube with different allowable stress. However, ASME use different equations with the same value of allowable stress intensity. The hydraulic test pressure of ASME was also compared with that of Russian standard. In general, hydraulic test pressure determined by Russian standard is higher since it considers difference between allowable stress of test temperature and that of design temperature

A minimal path searching approach for active shape model (ASM)-based segmentation of the lung

Science.gov (United States)

Guo, Shengwen; Fei, Baowei

2009-02-01

We are developing a minimal path searching method for active shape model (ASM)-based segmentation for detection of lung boundaries on digital radiographs. With the conventional ASM method, the position and shape parameters of the model points are iteratively refined and the target points are updated by the least Mahalanobis distance criterion. We propose an improved searching strategy that extends the searching points in a fan-shape region instead of along the normal direction. A minimal path (MP) deformable model is applied to drive the searching procedure. A statistical shape prior model is incorporated into the segmentation. In order to keep the smoothness of the shape, a smooth constraint is employed to the deformable model. To quantitatively assess the ASM-MP segmentation, we compare the automatic segmentation with manual segmentation for 72 lung digitized radiographs. The distance error between the ASM-MP and manual segmentation is 1.75 +/- 0.33 pixels, while the error is 1.99 +/- 0.45 pixels for the ASM. Our results demonstrate that our ASM-MP method can accurately segment the lung on digital radiographs.

A Minimal Path Searching Approach for Active Shape Model (ASM)-based Segmentation of the Lung.

Science.gov (United States)

Guo, Shengwen; Fei, Baowei

2009-03-27

We are developing a minimal path searching method for active shape model (ASM)-based segmentation for detection of lung boundaries on digital radiographs. With the conventional ASM method, the position and shape parameters of the model points are iteratively refined and the target points are updated by the least Mahalanobis distance criterion. We propose an improved searching strategy that extends the searching points in a fan-shape region instead of along the normal direction. A minimal path (MP) deformable model is applied to drive the searching procedure. A statistical shape prior model is incorporated into the segmentation. In order to keep the smoothness of the shape, a smooth constraint is employed to the deformable model. To quantitatively assess the ASM-MP segmentation, we compare the automatic segmentation with manual segmentation for 72 lung digitized radiographs. The distance error between the ASM-MP and manual segmentation is 1.75 ± 0.33 pixels, while the error is 1.99 ± 0.45 pixels for the ASM. Our results demonstrate that our ASM-MP method can accurately segment the lung on digital radiographs.

Greek women and broken nerves in Montreal.

Science.gov (United States)

Dunk, P

1989-05-01

In this paper, I examine the importance of class, ethnicity and gender in the causation and meaning of somatization for Greek women in Montreal. I argue that nevra--a form of psychosocial distress experienced by many of the women--is a phenomenon of the poor working conditions, low wages and gender relations in the Greek community. Data is based on interviews with 100 Greek families in Montreal and 45 patients in two different clinical settings. Comparing results with material on nervios and nerves from Latin America and the United States, I concur with Low (1985) that nerves should be viewed as a 'culturally-interpreted symptom' rather than a 'culture bound syndrome'. It is further suggested that the importance of social and material conditions and gender relations in mediating the cultural interpretation must be stressed. Failure to do so often results in the medicalization of nevra and the creation of a chronic sick role for the patient.

Passport of global nuclear business. ASME code certificate acquirement and inspection practices

International Nuclear Information System (INIS)

Kawabata, Hiroyuki; Terajima, Makoto; Anami, Kazuhiro

2010-01-01

There are possibilities of Japanese nuclear industries to participate in global business such as new and additional construction of nuclear power plants in US and also Asian and other developing countries in the world. It is requisite to acquire ASME code certificate for global business participation, just as passport. This article consists of five papers on present status of ASME code certificate acquirement and inspection practices of nuclear components vendors in the area of Japanese nuclear business. Activities of JSME Committee on Power Generation Facility Codes to make JSME codes corresponded to ASME nuclear codes and standards for their international deployment are also described. (T. Tanaka)

Review of ASME nuclear codes and standards- subcommittee on repairs, replacements, and modifications

International Nuclear Information System (INIS)

Mawson, T.J.

1990-01-01

As requested by the ASME board on Nuclear Codes and Standards, the Pressure Vessel Research Committee initiated a project to review Sections III and XI of the ASME Boiler and Pressure Vessel Code for the purposes of improving, clarifying, providing transition, consistency, compatibility, and simplifying code requirements. The project was organized with six subcommittees to address various Code activities: design; tests and examinations; documentation; quality assurance; repair, replacement and modification; and general requirements. This paper discusses how the subcommittee on repair, replacement and modification was organized to review the repair, replacement and modification requirements of the ASME boiler and pressure vessel code, Section III and Section XI for Class 1, 2, and 3 and MC components and their supports, and other documents of the nuclear industry related to the repair, replacement and modification requirements of the ASME code

[Ca2+]i oscillations in ASM: relationship with persistent airflow obstruction in asthma.

Science.gov (United States)

Sweeney, David; Hollins, Fay; Gomez, Edith; Saunders, Ruth; Challiss, R A John; Brightling, Christopher E

2014-07-01

The cause of airway smooth muscle (ASM) hypercontractility in asthma is not fully understood. The relationship of spontaneous intracellular calcium oscillation frequency in ASM to asthma severity was investigated. Oscillations were increased in subjects with impaired lung function abolished by extracellular calcium removal, attenuated by caffeine and unaffected by verapamil or nitrendipine. Whether modulation of increased spontaneous intracellular calcium oscillations in ASM from patients with impaired lung function represents a therapeutic target warrants further investigation. © 2014 The Authors. Respirology published by Wiley Publishing Asia Pty Ltd on behalf of Asian Pacific Society of Respirology.

Investigating ASME allowable loads with finite element analyses

International Nuclear Information System (INIS)

Mattar Neto, Miguel; Bezerra, Luciano M.; Miranda, Carlos A. de J.; Cruz, Julio R.B.

1995-01-01

The evaluation of nuclear components using finite element analysis (FEA) does not generally fall into the shell type verification adopted by the ASME Code. Consequently, the demonstration that the modes of failure are avoided sometimes is not straightforward. Allowable limits, developed by limit load theory, require the computation of shell membrane and bending stresses. How to calculate these stresses from FEA is not necessarily self-evident. One approach to be considered is to develop recommendations in a case-by-case basis for the most common pressure vessel geometries and loads based on comparison between the results of elastic and plastic FEA. In this paper, FE analyses of common 2D and complex 3D geometries are examined and discussed. It will be clear that in the cases studied, stress separation and categorization are not self-evident and simple tasks to undertake. Certain unclear recommendations of ASME Code can lead the stress analyst to non conservative designs as will be demonstrated in this paper. At the endo of this paper, taking into account comparison between elastic and elastic-plastic FE results from ANSYS some observations, suggestions and conclusions about the degree of conservatism of the ASME recommendations will be addressed. (author)

ASM LabCap's contributions to disease surveillance and the International Health Regulations (2005).

Science.gov (United States)

Specter, Steven; Schuermann, Lily; Hakiruwizera, Celestin; Sow, Mah-Séré Keita

2010-12-03

The revised International Health Regulations [IHR(2005)], which requires the Member States of the World Health Organization (WHO) to develop core capacities to detect, assess, report, and respond to public health threats, is bringing new challenges for national and international surveillance systems. As more countries move toward implementation and/or strengthening of their infectious disease surveillance programs, the strengthening of clinical microbiology laboratories becomes increasingly important because they serve as the first line responders to detect new and emerging microbial threats, re-emerging infectious diseases, the spread of antibiotic resistance, and the possibility of bioterrorism. In fact, IHR(2005) Core Capacity #8, "Laboratory", requires that laboratory services be a part of every phase of alert and response.Public health laboratories in many resource-constrained countries require financial and technical assistance to build their capacity. In recognition of this, in 2006, the American Society for Microbiology (ASM) established an International Laboratory Capacity Building Program, LabCap, housed under the ASM International Board. ASM LabCap utilizes ASM's vast resources and its membership's expertise-40,000 microbiologists worldwide-to strengthen clinical and public health laboratory systems in low and low-middle income countries. ASM LabCap's program activities align with HR(2005) by building the capability of resource-constrained countries to develop quality-assured, laboratory-based information which is critical to disease surveillance and the rapid detection of disease outbreaks, whether they stem from natural, deliberate or accidental causes.ASM LabCap helps build laboratory capacity under a cooperative agreement with the U.S. Centers for Disease Control and Prevention (CDC) and under a sub-contract with the Program for Appropriate Technology in Health (PATH) funded by the United States Agency for International Development (USAID

ASME section XI: rules for inservice inspection of nuclear power plants -an introspection

Energy Technology Data Exchange (ETDEWEB)

John, P K; Anto, Y; Mungikar, C P; Wagh, P M [Nuclear Power Corporation of India Ltd., Tarapur (India). Tarapur Atomic Power Station

1994-12-31

Section XI of the ASME BPV code is addressed to the examination, test and inspection requirements of the components of nuclear power plants (NPPs). Since its inception in 1970, this code section has undergone vast changes -probably the most among other ASME BPV code sections. Section XI is full fledged and lays down requirements with regard to all preservice inspections, inservice inspection, repair and replacement of components, tests of system etc. Tarapur Atomic Power Station (TAPS) has the distinction of being one of the earliest BWR type NPPs in the world that has an inservice inspection programme organised in line with the ASME section XI requirements. This paper summarises the experiences gained from time to time using this code section and a few suggestions to prospective users. An effort is also made to explain the philosophy of inservice inspection from ASME section XI point of view. 3 refs.

ASME section XI: rules for inservice inspection of nuclear power plants -an introspection

International Nuclear Information System (INIS)

John, P.K.; Anto, Y.; Mungikar, C.P.; Wagh, P.M.

1994-01-01

Section XI of the ASME BPV code is addressed to the examination, test and inspection requirements of the components of nuclear power plants (NPPs). Since its inception in 1970, this code section has undergone vast changes -probably the most among other ASME BPV code sections. Section XI is full fledged and lays down requirements with regard to all preservice inspections, inservice inspection, repair and replacement of components, tests of system etc. Tarapur Atomic Power Station (TAPS) has the distinction of being one of the earliest BWR type NPPs in the world that has an inservice inspection programme organised in line with the ASME section XI requirements. This paper summarises the experiences gained from time to time using this code section and a few suggestions to prospective users. An effort is also made to explain the philosophy of inservice inspection from ASME section XI point of view. 3 refs

Technical requirements for the ASME PRA standard for nuclear power plant applications

International Nuclear Information System (INIS)

Fleming, Karl N.; Bernsen, Sidney A.; Simard, Ronald L.

2000-01-01

In 1998 the American Society of Mechanical Engineers (ASME) formed the Committee on Nuclear Risk Management (CNRM) and a Project Team to develop a standard on PRAs for use in risk informed applications. This ASME standard is being developed to help provide an adequate level of quality in PRAs that are being used to support ASME initiatives to risk informed in-service inspection (ISI) and in-service testing (IST) of nuclear power plant components. A related need supported by the industry and the U.S. Nuclear Regulatory Commission is to reduce the level of effort that is being expended in pilot applications of risk informed initiatives to address questions about the sufficiency of quality in the supporting PRA models. The purpose of this paper is to discuss the authors' views on some of the technical issues that were encountered in the effort to develop the ASME PRA standard. Draft 12 of this standard has been issued for comment, and is currently being finalized with the aim of releasing the standard in early 2001. (author)

Interpreting ASME limits and philosophy in FEA of pressure vessel parts

International Nuclear Information System (INIS)

Bezerra, L.M.; Cruz, J.R.B.; Miranda, C.A.J.; Neto, M.M.

1995-01-01

In recent years there has been an effort to interpret finite element (FE) stress results on the light of the ASME B and PV rules and philosophy. Many task groups have issued guidelines on stress linearization and classifications. All those attempts have come up trying to cope modern FE techniques with the rules imposed by the ASME Code. This paper is an independent contribution to the Pressure Vessel Research Council (PVRC) groups which are studying the stress classification and the failure mechanism in a FE framework. This work tries to complement the interesting work by Hollinger and Hechmer presented in the PVP-94 in Minneapolis. In that paper, the authors examined a typical support skirt and showed relations between the skirt collapse load obtained by finite element analysis and the loads allowed from the ASME stress limits. To complement such paper, in the present article, different skirt geometry configurations are analyzed. The configurations here investigated consist of similar support skirts but with different angles of attachments between cylinder and cone parts. It will be possible to observe the influence of the bending stress in the collapse load and its relation to the allowable loads inferred from the ASME limits. A pressure vessel with torispherical head under internal pressure is also examined. Using elastic and limit load FEA, the present paper determines the collapse loads of the configurations. It sets up the relations between these collapse loads, stress categories, and limits dictated by the ASME Code Subsection NB. On the light of NB rules and philosophy, this paper shows how different methods of stress assessment, classification, and limits may influence in the design of a pressure vessel

14 CFR 330.31 - What data must air carriers submit concerning ASMs or RTMs?

Science.gov (United States)

2010-01-01

... combination passenger/cargo carrier, you must have submitted your August 2001 total completed ASM report to... correct an error that you document to the Department, you must not alter the ASM or RTM reports you...

Technical Challenge and Demonstration of Advanced Solution Monitoring and Measurement System (ASMS)

International Nuclear Information System (INIS)

Takaya, A.; Mukai, Y.; Nakamura, H.; Hosoma, T.; Yoshimoto, K.; Tamura, T.; Iwamoto, T.

2010-01-01

JNFL and JAEA have collaboratively started to develop an Advanced Solution Measurement and monitoring System (ASMS) as a part of technical challenge intended for next generation safeguards NDA equipment. After we completed feasibility study by using small detectors, the second stage of ASMS has installed into PCDF tank located in a cell, and then tested and calibrated by Pu nitrate solution experimentally. There was no experience measuring around 50kg Pu inventory directly, so it was very challenging work. The conventional SMMS (Solution Monitoring and Measurement System) that is composed of precision manometers acquires density, level and temperature of solution, so that the sampling and analysis are essential to obtain the nuclear material amount in the tank. The SMMS has two weak points on verification and monitoring of the nuclear material flow and inventory; (1) Direct measurement of the inventory cannot be done, (2) Solution rework and reagent adjustment operation in actual plant will make miss-interpretation on the monitoring evaluation. The purpose of ASMS development is to establish quantitative plutonium mass measurement technique directly by NDA of high concentrated pure plutonium nitrate solution and monitoring capability for solution transfers in a process. The merits of ASMS are considered below; (1) Provide direct Pu measurement and continuous monitoring capability, (2) Eliminate sampling and analysis at IIV, (3) Reduce unmeasured inventory. The target of the measurement uncertainty of ASMS is set less than 6% (1sigma) which is equivalent to meet the detection level of the partial defect at IIV by NDA. Known-alpha coincidence counting technique is applied to the ASMS, which is similar to the NDAs for MOX powder as a principle measurement technique. Especially, three following points are key techniques to establish ASMS. (1) Pre-determination of plutonium isotopic composition because it impacts alpha and rho-zero values to obtain multiplication

Design Procedure of Graphite Components by ASME HTR Codes

Energy Technology Data Exchange (ETDEWEB)

Kang, Ji-Ho; Jo, Chang Keun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet.

Design Procedure of Graphite Components by ASME HTR Codes

International Nuclear Information System (INIS)

Kang, Ji-Ho; Jo, Chang Keun

2016-01-01

In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet

The ASM Curriculum Guidelines for Undergraduate Microbiology: A Case Study of the Advocacy Role of Societies in Reform Efforts.

Science.gov (United States)

Horak, Rachel E A; Merkel, Susan; Chang, Amy

2015-05-01

A number of national reports, including Vision and Change in Undergraduate Biology Education: A Call to Action, have called for drastic changes in how undergraduate biology is taught. To that end, the American Society for Microbiology (ASM) has developed new Curriculum Guidelines for undergraduate microbiology that outline a comprehensive curriculum for any undergraduate introductory microbiology course or program of study. Designed to foster enduring understanding of core microbiology concepts, the Guidelines work synergistically with backwards course design to focus teaching on student-centered goals and priorities. In order to qualitatively assess how the ASM Curriculum Guidelines are used by educators and learn more about the needs of microbiology educators, the ASM Education Board distributed two surveys to the ASM education community. In this report, we discuss the results of these surveys (353 responses). We found that the ASM Curriculum Guidelines are being implemented in many different types of courses at all undergraduate levels. Educators indicated that the ASM Curriculum Guidelines were very helpful when planning courses and assessments. We discuss some specific ways in which the ASM Curriculum Guidelines have been used in undergraduate classrooms. The survey identified some barriers that microbiology educators faced when trying to adopt the ASM Curriculum Guidelines, including lack of time, lack of financial resources, and lack of supporting resources. Given the self-reported challenges to implementing the ASM Curriculum Guidelines in undergraduate classrooms, we identify here some activities related to the ASM Curriculum Guidelines that the ASM Education Board has initiated to assist educators in the implementation process.

The ASM Curriculum Guidelines for Undergraduate Microbiology: A Case Study of the Advocacy Role of Societies in Reform Efforts

Directory of Open Access Journals (Sweden)

Rachel E.A. Horak

2015-03-01

Full Text Available A number of national reports, including Vision and Change in Undergraduate Biology Education: A Call to Action, have called for drastic changes in how undergraduate biology is taught. To that end, the American Society for Microbiology (ASM developed new Curriculum Guidelines for undergraduate microbiology that outline a comprehensive curriculum for any undergraduate introductory microbiology course or program of study. Designed to foster enduring understanding of core microbiology concepts, the Guidelines work synergistically with backwards course design to focus teaching on student-centered goals and priorities.  In order to qualitatively assess how the ASM Curriculum Guidelines are used by educators and learn more about the needs of microbiology educators, the ASM Education Board distributed two surveys to the ASM education community. In this report, we discuss results of these surveys (353 responses. We found that the ASM Curriculum Guidelines are being implemented in many different types of courses at all undergraduate levels. Educators indicated that the ASM Curriculum Guidelines were very helpful when planning courses and assessments. We discuss some specific ways in which the ASM Curriculum Guidelines have been used in undergraduate classrooms. The survey identified some barriers that microbiology educators faced when trying to adopt the ASM Curriculum Guidelines, including lack of time, lack of financial resources, and lack of supporting resources. Given the self-reported challenges to implementing the ASM Curriculum Guidelines in undergraduate classrooms, we identify here some activities related to the ASM Curriculum Guidelines that the ASM Education Board has initiated to assist educators in the implementation process.

ASME Section XI philosophy related to operating nuclear plant fatigue damage protection

International Nuclear Information System (INIS)

Gosselin, S.R.

1995-01-01

When faced with operating fatigue concerns, nuclear plants traditionally look to the requirements contained in the original construction design code, ASME Section 3, as a basis for component operability. These rules constitute the requirements for nuclear power plant vessel and component construction and, when combined with the Owner's Design Specification, provide reasonable assurance of reliable operation. However, once construction is complete and operation begins, the purpose of any subsequent evaluations shifts from component ''design qualification'' to component ''fitness for service.'' This is a role that has been assumed for ASME Section 11. This paper presents a philosophy, recently endorsed by the ASME Section 11 Executive Committee, intended to guide future Code activities regarding fatigue and its impact on component serviceability

Validity of Montreal Cognitive Assessment in non-english speaking patients with Parkinson's disease.

Science.gov (United States)

Krishnan, Syam; Justus, Sunitha; Meluveettil, Radhamani; Menon, Ramshekhar N; Sarma, Sankara P; Kishore, Asha

2015-01-01

The Montreal Cognitive Assessment is a brief and easy screening tool for accurately testing cognitive dysfunction in Parkinson's disease. We tested its validity for use in non-English (Malayalam) speaking patients with Parkinson's disease. We developed a Malayalam (a south-Indian language) version of Montreal Cognitive Assessment and applied to 70 patients with Parkinson's disease and 60 age- and education-matched healthy controls. Metric properties were assessed, and the scores were compared with the performance in validated Malayalam versions of Mini Mental Status Examination and Addenbrooke's Cognitive Examination. The Montreal Cognitive Assessment-Malayalam showed good internal consistency and test-retest reliability and its scores correlated with Mini Mental Status Examination (patients: R = 0.70; P speaking Parkinson's disease patients for early screening and potential future interventions for cognitive dysfunction.

115-year-old society knows how to reach young scientists: ASM Young Ambassador Program.

Science.gov (United States)

Karczewska-Golec, Joanna

2015-12-25

With around 40,000 members in more than 150 countries, American Society for Microbiology (ASM) faces the challenge of meeting very diverse needs of its increasingly international members base. The newly launched ASM Young Ambassador Program seeks to aid the Society in this effort. Equipped with ASM conceptual support and financing, Young Ambassadors (YAs) design and pursue country-tailored approaches to strengthen the Society's ties with local microbiological communities. In a trans-national setting, the active presence of YAs at important scientific events, such as 16th European Congress on Biotechnology, forges new interactions between ASM and sister societies. The paper presents an overview of the Young Ambassadors-driven initiatives at both global and country levels, and explores the topic of how early-career scientists can contribute to science diplomacy and international relations. Copyright © 2014 Elsevier B.V. All rights reserved.

Researching on knowledge architecture of design by analysis based on ASME code

International Nuclear Information System (INIS)

Bao Shiyi; Zhou Yu; He Shuyan

2003-01-01

The quality of knowledge-based system's knowledge architecture is one of decisive factors of knowledge-based system's validity and rationality. For designing the ASME code knowledge based system, this paper presents a knowledge acquisition method which is extracting knowledge through document analysis consulted domain experts' knowledge. Then the paper describes knowledge architecture of design by analysis based on the related rules in ASME code. The knowledge of the knowledge architecture is divided into two categories: one is empirical knowledge, and another is ASME code knowledge. Applied as the basement of the knowledge architecture, a general procedural process of design by analysis that is met the engineering design requirements and designers' conventional mode is generalized and explained detailed in the paper. For the sake of improving inference efficiency and concurrent computation of KBS, a kind of knowledge Petri net (KPN) model is proposed and adopted in expressing the knowledge architecture. Furthermore, for validating and verifying of the empirical rules, five knowledge validation and verification theorems are given in the paper. Moreover the research production is applicable to design the knowledge architecture of ASME codes or other engineering standards. (author)

Approaching application of risk-based inspection to ASME code section XI

International Nuclear Information System (INIS)

Hedden, Owen F.

1995-01-01

This paper will describe current efforts within the ASME Boiler and Pressure Vessel Committee's Subcommittee on Nuclear Inservice Inspection to introduce risk-based technology to optimize inservice inspection of nuclear power plants. The subcommittee is responsible for the content of ASME Boiler and Pressure Vessel Code Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components. The paper will first provide the historical background for the inspection program currently in Section XI. It will then describe the development of new technology through the ASME Center for Research and Technology Development program. Next, the work now going on in two of the groups under the Section XI committee will be described in detail. Each of these two efforts is directed toward the application of new risk-based inspection technology to nuclear piping systems. Finally, the directions of additional research and applications of the technology will be discussed. (author)

Structural and functional analysis of the ASM p.Ala359Asp mutant that causes acid sphingomyelinase deficiency.

Science.gov (United States)

Acuña, Mariana; Castro-Fernández, Víctor; Latorre, Mauricio; Castro, Juan; Schuchman, Edward H; Guixé, Victoria; González, Mauricio; Zanlungo, Silvana

2016-10-21

Niemann-Pick disease (NPD) type A and B are recessive hereditary disorders caused by deficiency in acid sphingomyelinase (ASM). The p.Ala359Asp mutation has been described in several patients but its functional and structural effects in the protein are unknown. In order to characterize this mutation, we modeled the three-dimensional ASM structure using the recent available crystal of the mammalian ASM as a template. We found that the p.Ala359Asp mutation is localized in the hydrophobic core and far from the sphingomyelin binding site. However, energy function calculations using statistical potentials indicate that the mutation causes a decrease in ASM stability. Therefore, we investigated the functional effect of the p.Ala359Asp mutation in ASM expression, secretion, localization and activity in human fibroblasts. We found a 3.8% residual ASM activity compared to the wild-type enzyme, without changes in the other parameters evaluated. These results support the hypothesis that the p.Ala359Asp mutation causes structural alterations in the hydrophobic environment where ASM is located, decreasing its enzymatic activity. A similar effect was observed in other previously described NPDB mutations located outside the active site of the enzyme. This work shows the first full size ASM mutant model describe at date, providing a complete analysis of the structural and functional effects of the p.Ala359Asp mutation over the stability and activity of the enzyme. Copyright © 2016 Elsevier Inc. All rights reserved.

Roles of the outer membrane protein AsmA of Salmonella enterica in the control of marRAB expression and invasion of epithelial cells.

Science.gov (United States)

Prieto, Ana I; Hernández, Sara B; Cota, Ignacio; Pucciarelli, M Graciela; Orlov, Yuri; Ramos-Morales, Francisco; García-del Portillo, Francisco; Casadesús, Josep

2009-06-01

A genetic screen for suppressors of bile sensitivity in DNA adenine methylase (dam) mutants of Salmonella enterica serovar Typhimurium yielded insertions in an uncharacterized locus homologous to the Escherichia coli asmA gene. Disruption of asmA suppressed bile sensitivity also in phoP and wec mutants of S. enterica and increased the MIC of sodium deoxycholate for the parental strain ATCC 14028. Increased levels of marA mRNA were found in asmA, asmA dam, asmA phoP, and asmA wec strains of S. enterica, suggesting that lack of AsmA activates expression of the marRAB operon. Hence, asmA mutations may enhance bile resistance by inducing gene expression changes in the marRAB-controlled Mar regulon. In silico analysis of AsmA structure predicted the existence of one transmembrane domain. Biochemical analysis of subcellular fractions revealed that the asmA gene of S. enterica encodes a protein of approximately 70 kDa located in the outer membrane. Because AsmA is unrelated to known transport and/or efflux systems, we propose that activation of marRAB in asmA mutants may be a consequence of envelope reorganization. Competitive infection of BALB/c mice with asmA(+) and asmA isogenic strains indicated that lack of AsmA attenuates Salmonella virulence by the oral route but not by the intraperitoneal route. Furthermore, asmA mutants showed a reduced ability to invade epithelial cells in vitro.

The approach to analysis of significance of flaws in ASME section III and section XI

International Nuclear Information System (INIS)

Cowan, A.

1979-01-01

ASME III Appendix G and ASME XI Appendix A describe linear elastic fracture mechanics methods to assess the significance of defects in thick-walled pressure vessels for nuclear reactor systems. The assessment of fracture toughness, Ksub(Ic), is based upon recommendations made by a Task Group of the USA Pressure Vessel Research Committee and is dependent upon correlations with drop weight and Charpy V-notch data to give a lower bound of fracture toughness Ksub(IR). The methods used in the ASME Appendices are outlined noting that, whereas ASME III Appendix G defines a procedure for obtaining allowable pressure vessel loadings for normal service in the presence of a defect, ASME XI Appendix A defines methods for assessing the significance of defects (found by volumetric inspection) under normal and emergency and faulted conditions. The methods of analysis are discussed with respect to material properties, flaw characterisation, stress analysis and recommended safety factors; a short discussion is given on the applicability of the data and methods to other materials and non-nuclear structures. (author)

Comparison of SKIFS 2004:1 and Tillsynshandbok PSA against the ASME PRA Standard and European requirements on PSA

International Nuclear Information System (INIS)

Hellstroem, Per

2005-04-01

Requirements on PSA for risk informed applications are expressed in different international documents. The ASME PRA standard published in spring 2002 is one such document, PSA requirements are also expressed in the European Utility Requirements (EUR) for new reactors. The Swedish PSA requirements are provided in the Swedish regulators (SKI) statutes SKIFS 2004:1. SKI also has a review handbook for PSA activities (SKI report 2003:48). The review handbook is a support during review of the utilities PSA activities and the PSAs themselves. The review handbook expresses SKIs expectations by providing so called important aspects for both the PSA work and the PSAs, A comparison of SKIFS requirements and the important aspects in the Review handbook, on one side, and the requirements on PSA in EUR and ASME on the other side, is presented. The comparison shows a large difference in the level of detail in the different documents, where ASME is most detailed and specific. This is expected since the SKI review handbook not is a 'PSA guide' in the same way as the ASME PRA standard. A direct comparison of the ASME PRA standard requirements with the important aspects in the review handbook cannot answer the question which ASME capacity level that is achieved by a PSA meeting all important aspects. The conclusion is that it is not likely to achieve capacity level 2 and 3, since very few ASME level 3 attributes are explicitly expressed as important aspects, though many are expressed in general terms. The review handbook important aspects that are most similar to the ASME capacity level 1 attributes are initiating events, sequence analysis, and system analysis while less similarity is found for analysis of operator actions data analysis, quantification and containment analysis (level 2). Less similarity is found for capacity level 2 and 3. However, the number of additional ASME attributes on capacity level 2 and 3 are few. There are also important aspects in the review handbook that

Neurospora crassa ASM-1 complements the conidiation defect in a stuA mutant of Aspergillus nidulans.

Science.gov (United States)

Chung, Dawoon; Upadhyay, Srijana; Bomer, Brigitte; Wilkinson, Heather H; Ebbole, Daniel J; Shaw, Brian D

2015-01-01

Aspergillus nidulans StuA and Neurospora crassa ASM-1 are orthologous APSES (ASM-1, PHD1, SOK2, Efg1, StuA) transcription factors conserved across a diverse group of fungi. StuA and ASM-1 have roles in asexual (conidiation) and sexual (ascospore formation) development in both organisms. To address the hypothesis that the last common ancestor of these diverse fungi regulated conidiation with similar genes, asm-1 was introduced into the stuA1 mutant of A. nidulans. Expression of asm-1 complemented defective conidiophore morphology and restored conidia production to wild type levels in stuA1. Expression of asm-1 in the stuA1 strain did not rescue the defect in sexual development. When the conidiation regulator AbaA was tagged at its C-terminus with GFP in A. nidulans, it localized to nuclei in phialides. When expressed in the stuA1 mutant, AbaA::GFP localized to nuclei in conidiophores but no longer was confined to phialides, suggesting that expression of AbaA in specific cell types of the conidiophore was conditioned by StuA. Our data suggest that the function in conidiation of StuA and ASM-1 is conserved and support the view that, despite the great morphological and ontogenic diversity of their condiphores, the last common ancestor of A. nidulans and N. crassa produced an ortholog of StuA that was involved in conidiophore development. © 2015 by The Mycological Society of America.

Inservice inspection procedures and training according to the ASME code

International Nuclear Information System (INIS)

Greenwald, S.M.; Chockie, L.J.

1987-01-01

Mandatory training of the technical staff at a nuclear power plant is of paramount importance if we are to avoid costly plant shutdowns. This training should include the requirements for both Preservice and Inservice Inspection, in addition to Quality Assurance procedures as required by the American Society of Mechanical Engineers (ASME) Code. The training is best accomplished by utilizing instructors who are thoroughly familiar with plant operations and the ASME Code, as well as serving on one of the Code committees. This paper focuses on the Inservice Inspection procedures and the results of an intensive training effort to implement such procedures. (author)

Corticosteroids reduce IL-6 in ASM cells via up-regulation of MKP-1.

Science.gov (United States)

Quante, Timo; Ng, Yee Ching; Ramsay, Emma E; Henness, Sheridan; Allen, Jodi C; Parmentier, Johannes; Ge, Qi; Ammit, Alaina J

2008-08-01

The mechanisms by which corticosteroids reduce airway inflammation are not completely understood. Traditionally, corticosteroids were thought to inhibit cytokines exclusively at the transcriptional level. Our recent evidence, obtained in airway smooth muscle (ASM), no longer supports this view. We have found that corticosteroids do not act at the transcriptional level to reduce TNF-alpha-induced IL-6 gene expression. Rather, corticosteroids inhibit TNF-alpha-induced IL-6 secretion by reducing the stability of the IL-6 mRNA transcript. TNF-alpha-induced IL-6 mRNA decays at a significantly faster rate in ASM cells pretreated with the corticosteroid dexamethasone (t(1/2) = 2.4 h), compared to vehicle (t(1/2) = 9.0 h; P ASM cells.

The ASME research task force on risk-based in-service inspection

International Nuclear Information System (INIS)

Balkey, K.R.; Chapman, O.J.V.

1997-01-01

The use of risk-based methods in the development of in-service inspection (ISI) and in-service testing (IST) programs for nuclear power plant and other industrial applications has been studied for the last several years through the American Society of Mechanical Engineers Centre for Research and Technology Development (ASME 1991, 1992, 1994, 1996). The results of this work are being used as a foundation to develop specific requirements for implementation of risk-based technology in ASME Codes and Standards, regulatory requirements and industry programs both in the U.S. and other countries. This paper provides a brief overview of the ASME Research Methodology and how it has been adapted for application to the inspection of piping within the USA. It also relates how the reliability of nondestructive examination (NDE) methods for pressure boundary components can impact the risk and discusses the relationship between this and NDE qualification/demonstration now being implemented in Europe and the USA. (orig.)

Proceedings: 2001 ASME/EPRI Radwaste Workshop

International Nuclear Information System (INIS)

2001-01-01

Nuclear utilities continually evaluate methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has increased the emphasis on this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technology and management improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail

The Montreal Protocol for Identification of Amusia.

Science.gov (United States)

Vuvan, D T; Paquette, S; Mignault Goulet, G; Royal, I; Felezeu, M; Peretz, I

2018-04-01

The Montreal Battery for the Evaluation of Amusia (MBEA; Peretz, Champod, & Hyde Annals of the New York Academy of Sciences, 999, 58-75, 2003) is an empirically grounded quantitative tool that is widely used to identify individuals with congenital amusia. The use of such a standardized measure ensures that the individuals tested will conform to a specific neuropsychological profile, allowing for comparisons across studies and research groups. Recently, a number of researchers have published credible critiques of the usefulness of the MBEA as a diagnostic tool for amusia. Here we argue that the MBEA and its online counterpart, the AMUSIA tests (Peretz et al. Music Perception, 25, 331-343, 2008), should be considered steps in a screening process for amusia, rather than standalone diagnostic tools. The goal of this article is to present, in detailed and easily replicable format, the full protocol through which congenital amusics should be identified. In providing information that has often gone unreported in published articles, we aim to clarify the strengths and limitations of the MBEA and to make recommendations for its continued use by the research community as part of the Montreal Protocol for Identification of Amusia.

Revision of the ASME nuclear quality assurance standard and its historical background

International Nuclear Information System (INIS)

Suzuki, Tetsuya

2009-01-01

ASME NQA-1-2008 'Quality Assurance Requirements for Nuclear Facility Applications' will be endorsed by US NRC by the end of 2009. This standard will apply to design, construction and operation of nuclear power plants newly erected in USA. It is important to Japanese vendors developing nuclear business in USA. Historical background, significance of revision and main revised points of the ASME nuclear quality assurance standard are described in the present paper. (T. Tanaka)

Cyclin D1 in ASM Cells from Asthmatics Is Insensitive to Corticosteroid Inhibition.

Science.gov (United States)

Allen, Jodi C; Seidel, Petra; Schlosser, Tobias; Ramsay, Emma E; Ge, Qi; Ammit, Alaina J

2012-01-01

Hyperplasia of airway smooth muscle (ASM) is a feature of the remodelled airway in asthmatics. We examined the antiproliferative effectiveness of the corticosteroid dexamethasone on expression of the key regulator of G(1) cell cycle progression-cyclin D1-in ASM cells from nonasthmatics and asthmatics stimulated with the mitogen platelet-derived growth factor BB. While cyclin D1 mRNA and protein expression were repressed in cells from nonasthmatics in contrast, cyclin D1 expression in asthmatics was resistant to inhibition by dexamethasone. This was independent of a repressive effect on glucocorticoid receptor translocation. Our results corroborate evidence demonstrating that corticosteroids inhibit mitogen-induced proliferation only in ASM cells from subjects without asthma and suggest that there are corticosteroid-insensitive proliferative pathways in asthmatics.

The importance of the Montreal Protocol in protecting climate

NARCIS (Netherlands)

Velders, G.J.M.; Andersen, S.O.; Daniel, J.S.; Fahey, D.W.; McFarland, M.

2007-01-01

The 1987 Montreal Protocol on Substances that Deplete the Ozone Layer is a landmark agreement that has successfully reduced the global production, consumption, and emissions of ozone-depleting substances (ODSs). ODSs are also greenhouse gases that contribute to the radiative forcing of climate

Proceedings: 2000 ASME/EPRI Radwaste Workshop

International Nuclear Information System (INIS)

2001-01-01

Nuclear utilities are continually evaluating methods to improve operations and reduce costs associated with radioactive waste management. The continuing deregulation process has added increased emphasis to this activity. The Annual ASME/EPRI Workshop facilitates this effort by communicating technological and managerial improvements throughout the industry. This workshop, restricted to utility radwaste professionals, also serves to communicate practical in-plant improvements with the opportunity to discuss them in detail

Rethinking ASME III seismic analysis for piping operability evaluations

International Nuclear Information System (INIS)

Adams, T.M.; Stevenson, J.D.

1994-01-01

It has been recognized since the mid 1980's that there are very large seismic margins to failure for nuclear piping systems when designed using current industry practice, design criteria, and methods. As a result of this realization there are or have been approximately eighteen initiatives within the ASME , Boiler and Pressure Vessel Code Section III, Division 1, in the form of proposed code cases and proposed code text changes designed to reduce these failure margins to more realistic values. For the most part these initiatives have concentrated on reclassifying seismic inertia stresses in the piping as secondary and increasing the allowable stress limits permitted by Section III of the ASME, Boiler Code. This paper focuses on the application of non-linear spectral analysis methods as a method to reduce the input seismic demand determination and thereby reduce the seismic failure margins. The approach is evaluated using the ASME Boiler Pressure Vessel Code Section III Subgroup on Design benchmark procedure as proposed by the Subgroup's Special Task Group on Integrated Piping Criteria. Using this procedure, criteria are compared to current code criterion and analysis methods, and several other of the currently proposed Boiler and Pressure Vessel, Section III, changes. Finally, the applicability of the non-linear spectral analysis to continued Safe Operation Evaluations is reviewed and discussed

Estimating the health benefits of planned public transit investments in Montreal.

Science.gov (United States)

Tétreault, Louis-François; Eluru, Naveen; Hatzopoulou, Marianne; Morency, Patrick; Plante, Celine; Morency, Catherine; Reynaud, Frederic; Shekarrizfard, Maryam; Shamsunnahar, Yasmin; Faghih Imani, Ahmadreza; Drouin, Louis; Pelletier, Anne; Goudreau, Sophie; Tessier, Francois; Gauvin, Lise; Smargiassi, Audrey

2018-01-01

Since public transit infrastructure affects road traffic volumes and influences transportation mode choice, which in turn impacts health, it is important to estimate the alteration of the health burden linked with transit policies. We quantified the variation in health benefits and burden between a business as usual (BAU) and a public transit (PT) scenarios in 2031 (with 8 and 19 new subway and train stations) for the greater Montreal region. Using mode choice and traffic assignment models, we predicted the transportation mode choice and traffic assignment on the road network. Subsequently, we estimated the distance travelled in each municipality by mode, the minutes spent in active transportation, as well as traffic emissions. Thereafter we estimated the health burden attributed to air pollution and road traumas and the gains associated with active transportation for both the BAU and PT scenarios. We predicted a slight decrease of overall trips and kilometers travelled by car as well as an increase of active transportation for the PT in 2031 vs the BAU. Our analysis shows that new infrastructure will reduce the overall burden of transportation by 2.5 DALYs per 100,000 persons. This decrease is caused by the reduction of road traumas occurring in the inner suburbs and central Montreal region as well as gains in active transportation in the inner suburbs. Based on the results of our study, transportation planned public transit projects for Montreal are unlikely to reduce drastically the burden of disease attributable to road vehicles and infrastructures in the Montreal region. The impact of the planned transportation infrastructures seems to be very low and localized mainly in the areas where new public transit stations are planned. Copyright © 2017 Elsevier Inc. All rights reserved.

Face-offs in reproductive immunology: the Montreal forum meeting report.

Science.gov (United States)

Croy, B Anne; Baines, Malcolm G

2004-10-01

The combined 12th International Congress of Immunology (ICI) and the 4th Annual Conference of the Federation of Clinical Immunological Societies (FOCIS) was held in Montreal, Canada July 18-23, 2004 and attracted over 6000 immunologists and almost 4000 abstracts. The host society, the Canadian Society for Immunology (CSI) spent many years in preparation for this large meeting and encouraged its members to propose topics for symposia and mini-symposia and to sponsor satellite meetings. With sponsorship of CSI; the Canadian Institutes of Health Research; the University of Guelph, Guelph, ON; Queen's University, Kingston, ON; McGill University, Montreal, QU, Canada; and the American Society for Reproductive Immunology, a focused, highly successful, one day satellite meeting on human uterine immunology was held. The highlights of the presentations and discussions are reported.

Interaction between endoplasmic/sarcoplasmic reticulum stress (ER/SR stress), mitochondrial signaling and Ca(2+) regulation in airway smooth muscle (ASM).

Science.gov (United States)

Delmotte, Philippe; Sieck, Gary C

2015-02-01

Airway inflammation is a key aspect of diseases such as asthma. Several inflammatory cytokines (e.g., TNFα and IL-13) increase cytosolic Ca(2+) ([Ca(2+)]cyt) responses to agonist stimulation and Ca(2+) sensitivity of force generation, thereby enhancing airway smooth muscle (ASM) contractility (hyper-reactive state). Inflammation also induces ASM proliferation and remodeling (synthetic state). In normal ASM, the transient elevation of [Ca(2+)]cyt induced by agonists leads to a transient increase in mitochondrial Ca(2+) ([Ca(2+)]mito) that may be important in matching ATP production with ATP consumption. In human ASM (hASM) exposed to TNFα and IL-13, the transient increase in [Ca(2+)]mito is blunted despite enhanced [Ca(2+)]cyt responses. We also found that TNFα and IL-13 induce reactive oxidant species (ROS) formation and endoplasmic/sarcoplasmic reticulum (ER/SR) stress (unfolded protein response) in hASM. ER/SR stress in hASM is associated with disruption of mitochondrial coupling with the ER/SR membrane, which relates to reduced mitofusin 2 (Mfn2) expression. Thus, in hASM it appears that TNFα and IL-13 result in ROS formation leading to ER/SR stress, reduced Mfn2 expression, disruption of mitochondrion-ER/SR coupling, decreased mitochondrial Ca(2+) buffering, mitochondrial fragmentation, and increased cell proliferation.

Selections from the ABC 2011 Annual Convention, Montreal, Canada

Science.gov (United States)

Whalen, D. Joel; Andersen, Ken; Campbell, Gloria; Crenshaw, Cheri; Cross, Geoffrey A.; Grinols, Anne Bradstreet; Hildebrand, John; Newman, Amy; Ortiz, Lorelei A.; Paulson, Edward; Phillabaum, Melinda; Powell, Elizabeth A.; Sloan, Ryan

2012-01-01

The 12 Favorite Assignments featured in this article were presented at the 2011 Annual Convention of the Association for Business Communication (ABC), Montreal, Canada. A variety of learning objectives are featured: delivering bad news, handling difficult people, persuasion, reporting financial analysis, electronic media, face-to-face…

Identifying and Measuring Dimensions of Urban Deprivation in Montreal: An Analysis of the 1996 Census Data.

Science.gov (United States)

Langlois, Andre; Kitchen, Peter

2001-01-01

Used 1996 Canadian census data to examine the spatial structure and intensity of urban deprivation in Montreal. Analysis of 20 indicators of urban deprivation identified 6 main types of deprivation in the city and found that they were most visible on the Island of Montreal. Urban deprivation was not confined to the inner city. (SM)

Roles of the Outer Membrane Protein AsmA of Salmonella enterica in the Control of marRAB Expression and Invasion of Epithelial Cells▿

OpenAIRE

Prieto, Ana I.; Hernández, Sara B.; Cota, Ignacio; Pucciarelli, M. Graciela; Orlov, Yuri; Ramos-Morales, Francisco; García-del Portillo, Francisco; Casadesús, Josep

2009-01-01

A genetic screen for suppressors of bile sensitivity in DNA adenine methylase (dam) mutants of Salmonella enterica serovar Typhimurium yielded insertions in an uncharacterized locus homologous to the Escherichia coli asmA gene. Disruption of asmA suppressed bile sensitivity also in phoP and wec mutants of S. enterica and increased the MIC of sodium deoxycholate for the parental strain ATCC 14028. Increased levels of marA mRNA were found in asmA, asmA dam, asmA phoP, and asmA wec strains of S....

Technical justification for ASME code section xi crack detection by visual examination

International Nuclear Information System (INIS)

Nickell, R.E.; Rashid, Y.R.

2001-01-01

A critical technical element of nuclear power plant license renewal in the United States is the demonstration that the effects of aging do not compromise the intended safety function(s) of a system, structure, or component during the extended term of operation. The demonstration may take either of two forms. First, it can be shown that the design basis for the system, structure, or component is sufficiently robust that the aging effects have been insignificant through the current license term, and will continue to be insignificant through the extended term. Alternatively, it can be shown that, while the aging effects may be potentially significant, those effects can be managed and functionality maintained by defined programmatic activities during the extended term of operation. The first of the two approaches is generally provided by the construction basis, such as construction in accordance with the ASME Code Section III and other consensus codes and standards. The second of the two approaches is often provided by periodic inservice inspection and testing, in accordance with the ASME Code Section XI. The purpose of the ASME Section XI inspections and tests is to assure that systems, components, and structures are fit for continued service until the next scheduled inspection or test. The purpose of this paper is to document the effectiveness of the current ASME Code Section XI visual examination procedures in detecting the effects of aging for systems, structures, and components that are tolerant of mature cracks. (author)

ASME and RCC-MR comparison for the prevention of fatigue analysis

International Nuclear Information System (INIS)

Autrusson, B.; Acker, D.

1989-01-01

The purpose of this survey is to compare the simplified methods, without reference to the safety factor allowed for the mechanical properties. An application of both codes, RCC-MR and ASME, on the design of the wall mock-up of the NET project is made and also an estimation with an elastoplastic analysis. In the case of fatigue analysis according to ASME in the plastic field, the elastic stress is magnified by a K e factor derived from stress variation, S n , disregarding geometrical discontinuities. According to RCC-MR, the elastic maximum strain will magnified by two coefficients accounting for plasticity and variation of Poisson ratio

SUSTAINABILITY ASSESSMENT IN URBAN PLANNING. A CHALLENGE FOR A METHODOLOGICAL CONSTRUCTION: MONTREAL AS CASE STUDY

Directory of Open Access Journals (Sweden)

María de Lourdes Flores Lucero

2014-09-01

Full Text Available In this paper we describe the methodological process for the qualitative evaluation of the concept of sustainability and its application in the island of Montreal. At the same time we present our theoretical approach and the main results issued of the assessment. We take as analytical tools the Montreal Urban Plan of 2004 and the Strategic Plan for Sustainable Development 2005. We conclude with two main points, first, that the theoretical and pragmatic aspects of urban sustainability in Montreal have been treated in an organic, complex, dynamic and flexible way, allowing social participation and the inclusion of the values of all stakeholders, which are both key elements to follow the path towards sustainability; and secondly, that the approach to an object with such features requires the construction of complex, organic and methodological processes.

Simulation and optimization of a coking wastewater biological treatment process by activated sludge models (ASM).

Science.gov (United States)

Wu, Xiaohui; Yang, Yang; Wu, Gaoming; Mao, Juan; Zhou, Tao

2016-01-01

Applications of activated sludge models (ASM) in simulating industrial biological wastewater treatment plants (WWTPs) are still difficult due to refractory and complex components in influents as well as diversity in activated sludges. In this study, an ASM3 modeling study was conducted to simulate and optimize a practical coking wastewater treatment plant (CWTP). First, respirometric characterizations of the coking wastewater and CWTP biomasses were conducted to determine the specific kinetic and stoichiometric model parameters for the consecutive aeration-anoxic-aeration (O-A/O) biological process. All ASM3 parameters have been further estimated and calibrated, through cross validation by the model dynamic simulation procedure. Consequently, an ASM3 model was successfully established to accurately simulate the CWTP performances in removing COD and NH4-N. An optimized CWTP operation condition could be proposed reducing the operation cost from 6.2 to 5.5 €/m(3) wastewater. This study is expected to provide a useful reference for mathematic simulations of practical industrial WWTPs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Mini‑Mental State Exam versus Montreal Cognitive Assessment in ...

African Journals Online (AJOL)

Background: Mini‑mental state exam (MMSE) was used several times but no study has examined cognition on the Montreal Cognitive Assessment (MoCA) in diabetes and diabetic retinopathy (DR). In this study, we compared MMSE with MoCA in patients with DR and searched for an association between the severity of DR ...

Basic requirements of mechanical properties for nuclear pressure vessel materials in ASME-BPV code

International Nuclear Information System (INIS)

Ning Dong; Yao Weida

2011-01-01

The four basic aspects of strengths, ductility, toughness and fatigue strengths can be summarized for overall mechanical properties requirements of materials for nuclear pressure-retaining vessels in ASME-BPV code. These mechanical property indexes involve in the factors of melting, manufacture, delivery conditions, check or recheck for mechanical properties and chemical compositions, etc. and relate to degradation and damage accumulation during the use of materials. This paper specifically accounts for the basic requirements and theoretic basis of mechanical properties for nuclear pressure vessel materials in ASME-BPV code and states the internal mutual relationships among the four aspects of mechanical properties. This paper focuses on putting forward at several problems on mechanical properties of materials that shall be concerned about during design and manufacture for nuclear pressure vessels according to ASME-BPV code. (author)

Función adrenal y metabolismo lipídico en niños asmáticos tratados con budesonida

Directory of Open Access Journals (Sweden)

Paoli-de Valeri Mariela

1999-01-01

Full Text Available Objetivo. Evaluar el efecto de bajas dosis de budesonida inhalado sobre la función adrenal y el metabolismo lipídico en niños asmáticos. Material y métodos. Se estudiaron: 10 niños asmáticos (edad promedio, 8.6 años tratados con budesonida inhalado (200-300 µg/día por un lapso mayor a tres meses (grupo A; 15 niños asmáticos (edad promedio, 7.8 años sin tratamiento esteroideo (grupo B, y 10 niños no asmáticos (grupo C. Se determinaron los niveles de cortisol basal y postestímulo con ACTH, andrógenos adrenales, lípidos y cortisol urinario. Resultados. Entre los grupos A y B no hubo diferencias significativas en las variables estudiadas. En los niños asmáticos (grupo A-B el cortisol urinario fue significativamente mayor en relación con el grupo C. Los niveles de triglicéridos, colesterol total, colesterol de la lipoproteína de baja densidad e índices aterogénicos fueron mayores en el grupo de niños asmáticos, con y sin budesonida, comparados con el grupo C. Conclusiones. El tratamiento con dosis bajas de budesonida inhalado en niños asmáticos no modificó la función del eje adrenal ni el metabolismo lipídico. Los pacientes asmáticos presentaron un perfil lipídico aterogénico que podría incrementar el riesgo de enfermedad cardiovascular.

Bibliometric Analyses Reveal Patterns of Collaboration between ASMS Members

Science.gov (United States)

Palmblad, Magnus; van Eck, Nees Jan

2018-03-01

We have explored the collaborative network of the current American Society for Mass Spectrometry (ASMS) membership using bibliometric methods. The analysis shows that 4249 members are connected in a single, large, co-authorship graph, including the majority of the most published authors in the field of mass spectrometry. The map reveals topographical differences between university groups and national laboratories, and that the co-authors with the strongest links have long worked together at the same location. We have collected and summarized information on the geographical distribution of members, showing a high coverage of active researchers in North America and Western Europe. Looking at research fields, we could also identify a number of new or `hot' topics among ASMS members. Interactive versions of the maps are available on-line at https://goo.gl/UBNFMQ (collaborative network) and https://goo.gl/WV25vm (research topics). [Figure not available: see fulltext.

Phosphorus cycling in Montreal's food and urban agriculture systems.

Science.gov (United States)

Metson, Geneviève S; Bennett, Elena M

2015-01-01

Cities are a key system in anthropogenic phosphorus (P) cycling because they concentrate both P demand and waste production. Urban agriculture (UA) has been proposed as a means to improve P management by recycling cities' P-rich waste back into local food production. However, we have a limited understanding of the role UA currently plays in the P cycle of cities or its potential to recycle local P waste. Using existing data combined with surveys of local UA practitioners, we quantified the role of UA in the P cycle of Montreal, Canada to explore the potential for UA to recycle local P waste. We also used existing data to complete a substance flow analysis of P flows in the overall food system of Montreal. In 2012, Montreal imported 3.5 Gg of P in food, of which 2.63 Gg ultimately accumulated in landfills, 0.36 Gg were discharged to local waters, and only 0.09 Gg were recycled through composting. We found that UA is only a small sub-system in the overall P cycle of the city, contributing just 0.44% of the P consumed as food in the city. However, within the UA system, the rate of recycling is high: 73% of inputs applied to soil were from recycled sources. While a Quebec mandate to recycle 100% of all organic waste by 2020 might increase the role of UA in P recycling, the area of land in UA is too small to accommodate all P waste produced on the island. UA may, however, be a valuable pathway to improve urban P sustainability by acting as an activity that changes residents' relationship to, and understanding of, the food system and increases their acceptance of composting.

The 1997 NRC IST workshops and the status of questions and issues directed to the ASME O and M committee

International Nuclear Information System (INIS)

DiBiasio, A.M.

1998-05-01

This paper describes the results of the four NRC Inservice Testing (IST) Workshops which were held in early 1997 pertaining to NRC Inspection Procedure P 73756, Inservice Testing of Pumps and Valves. It also presents the status of the ASME code committees' resolution of certain questions forwarded to the ASME by the NRC. These questions relate to code interpretations, inconsistencies in the code, and industry concerns that are most appropriately resolved through the ASME consensus process. The ASME committees reviewed the questions at their December 1997 and March 1998 code meetings. Of particular interest are those questions for which the ASME code committees did not agree with the NRC response. These questions, as well as those which the committees provided some additional insight or input, are presented in this paper

A Retrospective Look at 20 Years of ASM Education Programs (1990-2010 and a Prospective Look at the Next 20 Years (2011-2030

Directory of Open Access Journals (Sweden)

Amy Chang

2011-03-01

Full Text Available The Education Board of the American Society for Microbiology (ASM was established in the mid-1970s to address the graduate and medical education needs of ASM members. Since then, I have watched our offerings evolve from a small, graduate-level travel grant program for ASM meetings to a growing suite of professional development and networking opportunities including fellowships, publications, and conferences. Along the way, our audience has expanded from  graduate students to undergraduate biology and K-12 teachers, students of all ages, researchers, and the public.I have been fortunate enough to watch several pivotal programs and projects support our growth and change the status quo by providing opportunities for biology educators to flourish. These include the: (i Coalition for Education in the Life Sciences, (ii ASM Division on Microbiology Education, (iii ASM Conference for Undergraduate Educators, (iv ASM Journal of Microbiology & Biology Education, and (v ASM Fellowship Fund. In this review, the background and details I offer on each initiative help explain ASM Education offerings, how our growth has been supported, and where are we headed.

The ASME Section 11 Special Working Group On Plant Life Extension

International Nuclear Information System (INIS)

Katz, L.R.

1990-01-01

The codes and standards applicable to plant life extension have not been identified in the U.S. at this time. However, several initiatives have been taken to establish specific codes and standards pertaining to nuclear plant life extension (PLEX). One of these initiatives, sponsored by ASME, is the Section XI Special Working Group on Plant Life Extension (SWG-PLEX). The SWG-PLEX reports to the ASME Section XI Subcommittee and is responsible for recommending or drafting rules and requirements for modifying Section XI to accommodate age-related degradation to support nuclear plant life extension. This paper summarizes the results and reports the activities of the SWG-PLEX during the 1989/1990 period

Bronchodilatory and anti-inflammatory effects of ASM-024, a nicotinic receptor ligand, developed for the treatment of asthma.

Science.gov (United States)

Assayag, Evelyne Israël; Beaulieu, Marie-Josée; Cormier, Yvon

2014-01-01

Conventional asthma and COPD treatments include the use of bronchodilators, mainly β2-adrenergic agonists, muscarinic receptor antagonists and corticosteroids or leukotriene antagonists as anti-inflammatory agents. These active drugs are administered either separately or given as a fixed-dose combination medication into a single inhaler. ASM-024, a homopiperazinium compound, derived from the structural modification of diphenylmethylpiperazinium (DMPP), has been developed to offer an alternative mechanism of action that could provide symptomatic control through combined anti-inflammatory and bronchodilator properties in a single entity. A dose-dependent inhibition of cellular inflammation in bronchoalveolar lavage fluid was observed in ovalbumin-sensitized mice, subsequently treated for 3 days by nose-only exposure with aerosolized ASM-024 at doses up to 3.8 mg/kg (ED50 = 0.03 mg/kg). The methacholine ED250 values indicated that airway hyperresponsivenness (AHR) to methacholine decreased following ASM-024 administration by inhalation at a dose of 1.5 mg/kg, with a value of 0.145 ± 0.032 mg/kg for ASM 024-treated group as compared to 0.088 ± 0.023 mg/kg for untreated mice. In in vitro isometric studies, ASM-024 elicited dose-dependent relaxation of isolated mouse tracheal, human, and dog bronchial preparations contracted with methacholine and guinea pig tracheas contracted with histamine. ASM-024 showed also a dose and time dependant protective effect on methacholine-induced contraction. Overall, with its combined anti-inflammatory, bronchodilating and bronchoprotective properties, ASM-024 may represent a new class of drugs with a novel pharmacological approach that could prove useful for the chronic maintenance treatment of asthma and, possibly, COPD.

Creep-fatigue damage evaluation for SS-316LN (ORNL PLATES): - RCC-MR vs. ASME SEC III - NH

International Nuclear Information System (INIS)

Sati, Bhuwan Chandra; Jalaldeen, S.; Velusamy, K.; Selvaraj, P.

2016-01-01

Investigations of high temperature tests done on ORNL plate with deformation control loading, under creep-fatigue damage have been presented. The test results with methodology of RCC-MR and ASME-NH life prediction under creep-fatigue loading have been assessed. The stress relaxation effect in calculating the life using RCC-MR under creep-fatigue damage is found to be significant in presence of secondary stress. RCC-MR: 2007 is more realistic number of cycles (predicts 51 number of cycles) as compared to ASME-NH (predicts 312 number of cycles) which is demonstrated by the experimental work (observed 86 numbers of cycles). Between RCC-MR and experimental work, design code seems to be more conservative for life prediction due to creep-fatigue damage. For fatigue damage, the approaches are same and the difference comes from material properties and the starting stress for applying Neuber's rule. ASME approach has the limitation of stress range magnitude. ASME approach predicts lower elastic plus plastic strain for the cases having S* above the linear stress limit. For creep strain and creep damage evaluation, ASME and RCC-MR have different approaches for calculating the stress at the beginning and during the hold period. The RCC-MR takes account of cyclic hardening or softening effects (hardening in the present case of 316 LN) by means of the cyclic stress-strain curve and the benefit of symmetrization effects which are significant for this material. The ASME code neglects these effects and instead relies on an approach based on the isochronous stress-strain curves. (author)

A study on technical issues of materials and design bases in ASME section III subsection NH code

International Nuclear Information System (INIS)

Lee, Hyeong Yeon; Kim, Jong Bum; Yoo, Bong

2000-12-01

In this study, an analysis of evaluation report by ORNL on the technical issues of elevated temperatures design guide line, ASME Code Section III Subsection NH was conducted and a brief evaluation procedure of the creep-fatigue damage was presented. ORNL published the report in 1993 and reviewed the issue areas where code rules or regulatory guides may be lacking or inadequate to ensure safe operation over the expected life cycles for liquid metal reactor systems. From historical viewpoint of the ASME NH code development, ASME Code Case 47 was changed much in 1989 edition, which includes the stress relaxation behavior in creep damage evaluation. Afterwards the 1992 version of CC N-47 was upgraded to Subsection NH in 1995 edition, which is the same with that of CC N-47 1992 edition except few material data. This report brings up the technical and regulatory issues that can not guarantee the safe and reliable operation of the ALMR which got the conceptual design certification from NRC. Twenty three technical issues were raised and settlement methodology were proposed. Additionally, the status of items approved by ASME code subgroup of elevated temperature design committee for the revision of the most recent 1998 edition of ASME NH was described

ASSESSING THE IMPACT OF THE HIGHWAY 25 EXPANSION PROJECT ON AIR QUALITY IN MONTREAL USING GIS

Directory of Open Access Journals (Sweden)

Mioara CHIABURU

2010-06-01

Full Text Available Assessing the impact of the highway 25 expansion project on air quality in montreal using gis. The aim of the paper is to assess local air pollution implications of the Highway 25 expansion project from Montreal. The basic concept of the roadway air dispersion model consists in calculating air pollutant levels in the vicinity of a highway by considering it as a line source. To fulfill this assessment, GIS software was used in order to determine pollutant distribution around the study area based on data collected by existing air monitoring stations located in the City of Montreal. GIS interpolation methods, notably Kriging and Inverse Distance Weighted (IDW, was used to generate maps of pollutant concentrations across the study area. From the results, recommendations will be made in regards to the project and appropriate mitigatory alternatives suggested.

Climate change impacts on pollinic productivity and allergic rhinitis in Montreal between 1994 and 2002

Energy Technology Data Exchange (ETDEWEB)

Garneau, M.; Breton, M.; Fortier, I. [Quebec Univ., Montreal, PQ (Canada)

2005-07-01

This presentation defined the correlation between pollinic concentrations of ragweed and medical consultations for allergic rhinitis in Montreal between 1994 and 2002, taking into account meteorological variables and socio-economic factors. The spatio-temporal dynamic of pollinic, meteorological, socio-economic and epidemiological values was reconstituted from descriptive, geographical and statistical analyses. Throughout the ragweed pollinic seasons (August to October) between 1994 and 2002 in the Montreal island area, there were 7,138 consultations for allergic rhinitis. The study concluded that the lengthening of the pollinic seasons, as well as the increase in the average number of medical consultations, combined with the significant correlation linking the temperature to pollinic concentrations suggests that the population affected by pollen allergies will increase over the coming decades in Montreal, and that it will affect certain areas more than others, which is consistent with the anticipated impacts of the rise in temperatures forecasted by different models of climate scenarios.

ASM-3 acid sphingomyelinase functions as a positive regulator of the DAF-2/AGE-1 signaling pathway and serves as a novel anti-aging target.

Directory of Open Access Journals (Sweden)

Yongsoon Kim

Full Text Available In C. elegans, the highly conserved DAF-2/insulin/insulin-like growth factor 1 receptor signaling (IIS pathway regulates longevity, metabolism, reproduction and development. In mammals, acid sphingomyelinase (ASM is an enzyme that hydrolyzes sphingomyelin to produce ceramide. ASM has been implicated in CD95 death receptor signaling under certain stress conditions. However, the involvement of ASM in growth factor receptor signaling under physiological conditions is not known. Here, we report that in vivo ASM functions as a positive regulator of the DAF-2/IIS pathway in C. elegans. We have shown that inactivation of asm-3 extends animal lifespan and promotes dauer arrest, an alternative developmental process. A significant cooperative effect on lifespan is observed between asm-3 deficiency and loss-of-function alleles of the age-1/PI 3-kinase, with the asm-3; age-1 double mutant animals having a mean lifespan 259% greater than that of the wild-type animals. The lifespan extension phenotypes caused by the loss of asm-3 are dependent on the functions of daf-16/FOXO and daf-18/PTEN. We have demonstrated that inactivation of asm-3 causes nuclear translocation of DAF-16::GFP protein, up-regulates endogenous DAF-16 protein levels and activates the downstream targeting genes of DAF-16. Together, our findings reveal a novel role of asm-3 in regulation of lifespan and diapause by modulating IIS pathway. Importantly, we have found that two drugs known to inhibit mammalian ASM activities, desipramine and clomipramine, markedly extend the lifespan of wild-type animals, in a manner similar to that achieved by genetic inactivation of the asm genes. Our studies illustrate a novel strategy of anti-aging by targeting ASM, which may potentially be extended to mammals.

ASM-3 acid sphingomyelinase functions as a positive regulator of the DAF-2/AGE-1 signaling pathway and serves as a novel anti-aging target.

Science.gov (United States)

Kim, Yongsoon; Sun, Hong

2012-01-01

In C. elegans, the highly conserved DAF-2/insulin/insulin-like growth factor 1 receptor signaling (IIS) pathway regulates longevity, metabolism, reproduction and development. In mammals, acid sphingomyelinase (ASM) is an enzyme that hydrolyzes sphingomyelin to produce ceramide. ASM has been implicated in CD95 death receptor signaling under certain stress conditions. However, the involvement of ASM in growth factor receptor signaling under physiological conditions is not known. Here, we report that in vivo ASM functions as a positive regulator of the DAF-2/IIS pathway in C. elegans. We have shown that inactivation of asm-3 extends animal lifespan and promotes dauer arrest, an alternative developmental process. A significant cooperative effect on lifespan is observed between asm-3 deficiency and loss-of-function alleles of the age-1/PI 3-kinase, with the asm-3; age-1 double mutant animals having a mean lifespan 259% greater than that of the wild-type animals. The lifespan extension phenotypes caused by the loss of asm-3 are dependent on the functions of daf-16/FOXO and daf-18/PTEN. We have demonstrated that inactivation of asm-3 causes nuclear translocation of DAF-16::GFP protein, up-regulates endogenous DAF-16 protein levels and activates the downstream targeting genes of DAF-16. Together, our findings reveal a novel role of asm-3 in regulation of lifespan and diapause by modulating IIS pathway. Importantly, we have found that two drugs known to inhibit mammalian ASM activities, desipramine and clomipramine, markedly extend the lifespan of wild-type animals, in a manner similar to that achieved by genetic inactivation of the asm genes. Our studies illustrate a novel strategy of anti-aging by targeting ASM, which may potentially be extended to mammals.

ASM-3 Acid Sphingomyelinase Functions as a Positive Regulator of the DAF-2/AGE-1 Signaling Pathway and Serves as a Novel Anti-Aging Target

Science.gov (United States)

Kim, Yongsoon; Sun, Hong

2012-01-01

In C. elegans, the highly conserved DAF-2/insulin/insulin-like growth factor 1 receptor signaling (IIS) pathway regulates longevity, metabolism, reproduction and development. In mammals, acid sphingomyelinase (ASM) is an enzyme that hydrolyzes sphingomyelin to produce ceramide. ASM has been implicated in CD95 death receptor signaling under certain stress conditions. However, the involvement of ASM in growth factor receptor signaling under physiological conditions is not known. Here, we report that in vivo ASM functions as a positive regulator of the DAF-2/IIS pathway in C. elegans. We have shown that inactivation of asm-3 extends animal lifespan and promotes dauer arrest, an alternative developmental process. A significant cooperative effect on lifespan is observed between asm-3 deficiency and loss-of-function alleles of the age-1/PI 3-kinase, with the asm-3; age-1 double mutant animals having a mean lifespan 259% greater than that of the wild-type animals. The lifespan extension phenotypes caused by the loss of asm-3 are dependent on the functions of daf-16/FOXO and daf-18/PTEN. We have demonstrated that inactivation of asm-3 causes nuclear translocation of DAF-16::GFP protein, up-regulates endogenous DAF-16 protein levels and activates the downstream targeting genes of DAF-16. Together, our findings reveal a novel role of asm-3 in regulation of lifespan and diapause by modulating IIS pathway. Importantly, we have found that two drugs known to inhibit mammalian ASM activities, desipramine and clomipramine, markedly extend the lifespan of wild-type animals, in a manner similar to that achieved by genetic inactivation of the asm genes. Our studies illustrate a novel strategy of anti-aging by targeting ASM, which may potentially be extended to mammals. PMID:23049887

Abelian Sandpile Model (ASM) and Infinite Volume Limit

Indian Academy of Sciences (India)

ASM- Properties. Any possible sequence of topplings leads to the same stable configuration [Dhar]. The result of particle addition at and subsequent relaxation is given by an operator. £ бвд £ евд £. , where вд £. ¢. ¦. ¤ззз ¤ вг иг . £. ©. ¢ йа£. (Abelian). 7-b ...

46 CFR 53.01-3 - Adoption of section IV of the ASME Boiler and Pressure Vessel Code.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Adoption of section IV of the ASME Boiler and Pressure...) MARINE ENGINEERING HEATING BOILERS General Requirements § 53.01-3 Adoption of section IV of the ASME Boiler and Pressure Vessel Code. (a) Heating boilers shall be designed, constructed, inspected, tested...

Temporal Evolution of Poststroke Cognitive Impairment Using the Montreal Cognitive Assessment

NARCIS (Netherlands)

Nijsse, Britta; Visser-Meily, Johanna M A; van Mierlo, Maria L; Post, Marcel W M; de Kort, Paul L M; van Heugten, Caroline M

BACKGROUND AND PURPOSE: The Montreal Cognitive Assessment (MoCA) is nowadays recommended for the screening of poststroke cognitive impairment. However, little is known about the temporal evolution of MoCA-assessed cognition after stroke. The objective of this study was to examine the temporal

Temporal Evolution of Poststroke Cognitive Impairment Using the Montreal Cognitive Assessment

NARCIS (Netherlands)

Nijsse, Britta; Visser-Meily, Johanna M.A.; van Mierlo, Maria L.; Post, Marcel W. M.; de Kort, Paul. L. M.; van Heugten, Caroline M.

Background and Purpose-The Montreal Cognitive Assessment (MoCA) is nowadays recommended for the screening of poststroke cognitive impairment. However, little is known about the temporal evolution of MoCA-assessed cognition after stroke. The objective of this study was to examine the temporal pattern

46 CFR 52.01-2 - Adoption of section I of the ASME Boiler and Pressure Vessel Code.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Adoption of section I of the ASME Boiler and Pressure...) MARINE ENGINEERING POWER BOILERS General Requirements § 52.01-2 Adoption of section I of the ASME Boiler and Pressure Vessel Code. (a) Main power boilers and auxiliary boilers shall be designed, constructed...

Estimates of the burst reliability of thin-walled cylinders designed to meet the ASME Code allowables

International Nuclear Information System (INIS)

Stancampiano, P.A.; Zemanick, P.P.

1976-01-01

Pressure containment components in nuclear power plants are designed by the conventional deterministic safety factor approach to meet the requirements of the ASME Pressure Vessel Code, Section III. The inevitable variabilities and uncertainties associated with the design, manufacture, installation, and service processes suggest a probabilistic design approach may also be pertinent. Accordingly, the burst reliabilities of two thin-walled 304 SS cylindrical vessels such as might be employed in liquid metal plants are estimated. A large vessel fabricated from rolled plate per ASME SA-240 and a smaller pipe sized vessel also fabricated from rolled plate per ASME SA-358 are considered. The vessels are sized to just meet the allowable ASME Code primary membrance stresses at 800 0 F (427 0 C). The bursting probability that the operating pressure is greater than the burst strength of the cylinders is calculated using stress-strength interference theory by direct Monte Carlo simulation on a high speed digital computer. A sensitivity study is employed to identify those design parameters which have the greatest effect on the reliability. The effects of preservice quality assurance defect inspections on the reliability are also evaluated parametrically

A Survey of Variable Extragalactic Sources with XTE's All Sky Monitor (ASM)

Science.gov (United States)

Jernigan, Garrett

1998-01-01

The original goal of the project was the near real-time detection of AGN utilizing the SSC 3 of the ASM on XTE which does a deep integration on one 100 square degree region of the sky. While the SSC never performed sufficiently well to allow the success of this goal, the work on the project has led to the development of a new analysis method for coded aperture systems which has now been applied to ASM data for mapping regions near clusters of galaxies such as the Perseus Cluster and the Coma Cluster. Publications are in preparation that describe both the new method and the results from mapping clusters of galaxies.

Assessment of induction elbows for an ASME Code application

International Nuclear Information System (INIS)

Panesar, J.S.; Soliman, M.

1991-01-01

The ASME Nuclear Codes impose some specific requirements on the wall thickness uniformity and the out-of-roundness of cross sections of the elbows for Nuclear Power Plant applications. Due to some of these requirements, manufacturing and installation of these elbows can be time consuming and quite expensive. This paper explores the feasibility of using induction elbows for nuclear application from the stress analysis point of view. To this end, three different sizes of 90deg elbows have been analyzed based on the geometry of an 'ASME Code' elbow and an elbow formed by induction bending. The analysis is carried out for internal pressure, in-plane and out-of-plane loads. Based on the results of these three carbon steel elbows, the use of induction elbows in some of the CANDU-PHW (CANadian Deuterium Uranium-Pressurized Heavy Water) power plant applications seems encouraging. However, before the feasibility can be fully confirmed analysis and induction bending tests over a wider range of geometries, loading conditions, and materials are required. (author)

Utilização de Ecolife® e Acibenzolar-s-metil (ASM no controle da antracnose da banana em pós-colheita Use of Ecolife® and Acibenzolar-S-metil (ASM on the control of antracnosis in banana post-harvest

Directory of Open Access Journals (Sweden)

Luciano Marinho Furtado

2010-09-01

Full Text Available O objetivo deste trabalho foi avaliar a ação dos produtos ASM e Ecolife no controle da antracnose pós-colheita em frutos de banana. Frutos sadios de banana, variedades maçã, prata, pacovan e cacau , em fase intermediária de maturação, foram imersos previamente em soluções de ASM e Ecolife e inoculados com Colletotrichum musae. Utilizou-se o delineamento inteiramente casualizado, em esquema fatorial com quatro repetições. Os resultados apresentados demonstraram a eficácia dos produtos nas concentrações de 5 ml/ L (Ecolife e 0,50g/ L (ASM no controle da antracnose nas variedades analisa das. A variedade cacau apresentou menor lesão quando tratada com o Ecolife (5,79 mm. Com relação ao efeito do ASM, a bana na prata demonstrou um melhor resultado, com tamanho médio de lesão de 5,62 mm. Com o decorrer do processo de maturação dos frutos houve um decréscimo na severidade da doença nas quatro variedades estudadas, exceto no tratamento testemunha, que continuou apresentando aumento no tamanho das lesões nos frutos e atingir a polpa ao final da maturação.The aim of this work was to evaluate the effects of ASM and Ecolife on the control of post-harvest antracnosis in banana. Banana fruits of Maçã, Prata, Pacovan and Figo varieties, at intermediate stage of maturation, were immersed in solutions of ASM and Ecolife and inoculated with Colletotrichum musae A completely randomized design was used, at a factorial scheme 4x2 (four varieties x two products with four replicates. The presented results demonstrated the susceptibility of the fruits to the disease, mainly Maça variety with lesion of 17,99 mm. It was demosntrated the effectiveness of products at concentrations of 5ml. L-1 (Ecolife and 0.50g. L-1 (ASM on antracnosis control. The Figo variety presented the smallest injuries when treated with Ecolife (5.79 mm. Regarding ASM effects, Prata variety demonstrated the best performance, with 5.62 mm of injuries diameter

Recommendations to ASME for code guidelines and criteria for continued operation of equipment

International Nuclear Information System (INIS)

Harvey, J.F.

1993-01-01

In May 1988, the American Society of Mechanical Engineers, ASME, asked the Pressure Vessel Research Council, PVRC, to review the part it should play in the continued operation of equipment originally designed and fabricated to the ASME codes and rules. This was prompted solely by an economic opportunity in which the capital expenditures to replace plants was far more costly than evaluating, repairing, and extending the nominal design life of the individual component. For instance, nuclear plants are normally designed for a life of 40 years, while fossil fired facilities may have been designed for other time lives, yet at the end of their original design life may actually have many useful years remaining. While this action was economically prompted, it inherently involved a two-fold one; namely, (1) safety, (2) legal. There is no question of safety to operating personnel. While codes for fossil components do not specify design lives, their adoption by many states provides a legal means of procedure in event of a mishap. This recognizes a cradle-to-grave safety responsibility. It is toward maintaining ASMEs leadership as a code authority that this report has been prepared

The precautionary principle as a provisional instrument in environmental policy: The Montreal Protocol case study

International Nuclear Information System (INIS)

Jacobs, J. Roger

2014-01-01

Highlights: • I examine whether a policy invoked under the Precautionary Principle can move beyond provisional status. • I review the certainty of conclusions based upon the Global Ozone Research and Monitoring Project. • There is high certainty that anthropogenic ozone depletion has health consequences in polar regions. • Current research focuses on long term projections of risk that perpetuates high uncertainty. • Establishment of a community to generate Assessments acts to perpetuate the period of uncertainty. - Abstract: Environmental studies identify possible threats to the health of the public or the environment when the scientific certainty of risk is low, but the potential cost is high. Governments may respond by invoking the Precautionary Principle, holding that scientific certainty is not required to take actions that reduce possible risk. EU guidelines suggest that precautionary measures remain provisional until sufficient scientific certainty is generated. Here I study the Scientific Assessments produced for the Montreal Protocol, and the scientific community that generates them, and ask whether a long-standing program of scientific investigation and monitoring can generate sufficient scientific certainty to move beyond dependence on the Precautionary Principle. When the Montreal Protocol was ratified, many scientists strongly suspected that anthropogenic substances like chlorofluorocarbons were depleting stratospheric ozone. Although the risk was uncertain, the perceived cost to public health of ozone depletion was high. A quarter century after formulating the Montreal Protocol, science can define the conditions for ozone depletion with great certainty, but uncertainty remains in determining the scale and distribution of the attributable increase in damaging ultra-violet (UV) radiation. Organisations, such as NASA, and scientists that contribute to the Scientific Assessments comprise the community in which the scientific consensus of risk is

ASM Based Synthesis of Handwritten Arabic Text Pages

Directory of Open Access Journals (Sweden)

Laslo Dinges

2015-01-01

Full Text Available Document analysis tasks, as text recognition, word spotting, or segmentation, are highly dependent on comprehensive and suitable databases for training and validation. However their generation is expensive in sense of labor and time. As a matter of fact, there is a lack of such databases, which complicates research and development. This is especially true for the case of Arabic handwriting recognition, that involves different preprocessing, segmentation, and recognition methods, which have individual demands on samples and ground truth. To bypass this problem, we present an efficient system that automatically turns Arabic Unicode text into synthetic images of handwritten documents and detailed ground truth. Active Shape Models (ASMs based on 28046 online samples were used for character synthesis and statistical properties were extracted from the IESK-arDB database to simulate baselines and word slant or skew. In the synthesis step ASM based representations are composed to words and text pages, smoothed by B-Spline interpolation and rendered considering writing speed and pen characteristics. Finally, we use the synthetic data to validate a segmentation method. An experimental comparison with the IESK-arDB database encourages to train and test document analysis related methods on synthetic samples, whenever no sufficient natural ground truthed data is available.

ASM Based Synthesis of Handwritten Arabic Text Pages.

Science.gov (United States)

Dinges, Laslo; Al-Hamadi, Ayoub; Elzobi, Moftah; El-Etriby, Sherif; Ghoneim, Ahmed

2015-01-01

Document analysis tasks, as text recognition, word spotting, or segmentation, are highly dependent on comprehensive and suitable databases for training and validation. However their generation is expensive in sense of labor and time. As a matter of fact, there is a lack of such databases, which complicates research and development. This is especially true for the case of Arabic handwriting recognition, that involves different preprocessing, segmentation, and recognition methods, which have individual demands on samples and ground truth. To bypass this problem, we present an efficient system that automatically turns Arabic Unicode text into synthetic images of handwritten documents and detailed ground truth. Active Shape Models (ASMs) based on 28046 online samples were used for character synthesis and statistical properties were extracted from the IESK-arDB database to simulate baselines and word slant or skew. In the synthesis step ASM based representations are composed to words and text pages, smoothed by B-Spline interpolation and rendered considering writing speed and pen characteristics. Finally, we use the synthetic data to validate a segmentation method. An experimental comparison with the IESK-arDB database encourages to train and test document analysis related methods on synthetic samples, whenever no sufficient natural ground truthed data is available.

Towards a consensus-based biokinetic model for green microalgae – The ASM-A

DEFF Research Database (Denmark)

Wágner, Dorottya Sarolta; Valverde Pérez, Borja; Sæbø, Mariann

2016-01-01

developed to predict microalgal growth. However, none of these models can effectively describe all the relevant processes when microalgal growth is coupled with nutrient removal and recovery from wastewaters. Here, we present a mathematical model developed to simulate green microalgal growth (ASM-A) using...... and substrate availability can introduce significant variability on parameter values for predicting the reaction rates for bulk nitrate and the intracellularly stored nitrogen state-variables, thereby requiring scenario specific model calibration. ASM-A was identified using standard cultivation medium...

Application of adjusted subpixel method (ASM) in HRCT measurements of the bronchi in bronchial asthma patients and healthy individuals.

Science.gov (United States)

Mincewicz, Grzegorz; Rumiński, Jacek; Krzykowski, Grzegorz

2012-02-01

Recently, we described a model system which included corrections of high-resolution computed tomography (HRCT) bronchial measurements based on the adjusted subpixel method (ASM). To verify the clinical application of ASM by comparing bronchial measurements obtained by means of the traditional eye-driven method, subpixel method alone and ASM in a group comprised of bronchial asthma patients and healthy individuals. The study included 30 bronchial asthma patients and the control group comprised of 20 volunteers with no symptoms of asthma. The lowest internal and external diameters of the bronchial cross-sections (ID and ED) and their derivative parameters were determined in HRCT scans using: (1) traditional eye-driven method, (2) subpixel technique, and (3) ASM. In the case of the eye-driven method, lower ID values along with lower bronchial lumen area and its percentage ratio to total bronchial area were basic parameters that differed between asthma patients and healthy controls. In the case of the subpixel method and ASM, both groups were not significantly different in terms of ID. Significant differences were observed in values of ED and total bronchial area with both parameters being significantly higher in asthma patients. Compared to ASM, the eye-driven method overstated the values of ID and ED by about 30% and 10% respectively, while understating bronchial wall thickness by about 18%. Results obtained in this study suggest that the traditional eye-driven method of HRCT-based measurement of bronchial tree components probably overstates the degree of bronchial patency in asthma patients. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Application of adjusted subpixel method (ASM) in HRCT measurements of the bronchi in bronchial asthma patients and healthy individuals

International Nuclear Information System (INIS)

Mincewicz, Grzegorz; Rumiński, Jacek; Krzykowski, Grzegorz

2012-01-01

Background: Recently, we described a model system which included corrections of high-resolution computed tomography (HRCT) bronchial measurements based on the adjusted subpixel method (ASM). Objective: To verify the clinical application of ASM by comparing bronchial measurements obtained by means of the traditional eye-driven method, subpixel method alone and ASM in a group comprised of bronchial asthma patients and healthy individuals. Methods: The study included 30 bronchial asthma patients and the control group comprised of 20 volunteers with no symptoms of asthma. The lowest internal and external diameters of the bronchial cross-sections (ID and ED) and their derivative parameters were determined in HRCT scans using: (1) traditional eye-driven method, (2) subpixel technique, and (3) ASM. Results: In the case of the eye-driven method, lower ID values along with lower bronchial lumen area and its percentage ratio to total bronchial area were basic parameters that differed between asthma patients and healthy controls. In the case of the subpixel method and ASM, both groups were not significantly different in terms of ID. Significant differences were observed in values of ED and total bronchial area with both parameters being significantly higher in asthma patients. Compared to ASM, the eye-driven method overstated the values of ID and ED by about 30% and 10% respectively, while understating bronchial wall thickness by about 18%. Conclusions: Results obtained in this study suggest that the traditional eye-driven method of HRCT-based measurement of bronchial tree components probably overstates the degree of bronchial patency in asthma patients.

Feature extraction for face recognition via Active Shape Model (ASM) and Active Appearance Model (AAM)

Science.gov (United States)

Iqtait, M.; Mohamad, F. S.; Mamat, M.

2018-03-01

Biometric is a pattern recognition system which is used for automatic recognition of persons based on characteristics and features of an individual. Face recognition with high recognition rate is still a challenging task and usually accomplished in three phases consisting of face detection, feature extraction, and expression classification. Precise and strong location of trait point is a complicated and difficult issue in face recognition. Cootes proposed a Multi Resolution Active Shape Models (ASM) algorithm, which could extract specified shape accurately and efficiently. Furthermore, as the improvement of ASM, Active Appearance Models algorithm (AAM) is proposed to extracts both shape and texture of specified object simultaneously. In this paper we give more details about the two algorithms and give the results of experiments, testing their performance on one dataset of faces. We found that the ASM is faster and gains more accurate trait point location than the AAM, but the AAM gains a better match to the texture.

The intracarotid amobarbital procedure (Wada test with two protocols combined, Montreal and Seattle Procedimentos do amobarbital intracarotideo (teste de Wada com dois protocolos combinados, Montreal e Seattle

Directory of Open Access Journals (Sweden)

Paulo J. M. Leite

1997-06-01

Full Text Available The intracarotid amobarbital procedure was carried out in 8 male and 7 female candidates to temporal lobectomy, and a female candidate to frontal lesionectomy, aged 18-50 (mean 32.5 years. Language and memory were tested after injection in each hemisphere. Both were measured by the Montreal procedure. In 9 patients language and memory were evaluated with the Seattle procedure too. In 12 patients the left hemisphere was dominant for language; three had bilateral dominance. In I patient the Seattle procedure demonstrated the dominant hemisphere by relatively slowness of speech during the drug effect in the left hemisphere. Memory was defined to be in the left hemisphere in 12 patients, in the right in 2, bilateral in 1 and in another lateralization was not possible. In 1 patient memory dominance was determined by the Montreal protocol alone because of lack of cooperation. These early results indicate that the methods may be complementary for determination of language and memory dominance in epilepsy surgery candidates.O testo do amobarbital intracarotídeo foi realizado em 8 homens e 7 mulheres candidatos a lobectomia temporal e em uma mulher candidata a lesionectomia frontal, com idades de 18-50 (média 32,5 anos. Linguagem e memória foram testadas após a injeção do amobarbial em cada hemisfério cerebral. Todos os pacientes foram avaliados pelo método de Montreal e 9 também pelo método de Seattle. Em 12 pacientes o hemisfério cerebral esquerdo foi dominante para linguagem e em 3 pacientes houve dominância bilateral. Em uma paciente a linguagem foi determinada apenas através do método de Seattle, com lentificação relativa da fal a, sob ação da droga no hemisfério cerebral esquerdo. Dominância da memória à esquerda foi observada em 12 pacientes, à direita em 2, bilateral em 1 e em outro não foi lateralizada. Dominância da memória foi definida apenas através do método de Montreal em um paciente, devido à pouca coopera

3D automatic anatomy segmentation based on iterative graph-cut-ASM.

Science.gov (United States)

Chen, Xinjian; Bagci, Ulas

2011-08-01

This paper studies the feasibility of developing an automatic anatomy segmentation (AAS) system in clinical radiology and demonstrates its operation on clinical 3D images. The AAS system, the authors are developing consists of two main parts: object recognition and object delineation. As for recognition, a hierarchical 3D scale-based multiobject method is used for the multiobject recognition task, which incorporates intensity weighted ball-scale (b-scale) information into the active shape model (ASM). For object delineation, an iterative graph-cut-ASM (IGCASM) algorithm is proposed, which effectively combines the rich statistical shape information embodied in ASM with the globally optimal delineation capability of the GC method. The presented IGCASM algorithm is a 3D generalization of the 2D GC-ASM method that they proposed previously in Chen et al. [Proc. SPIE, 7259, 72590C1-72590C-8 (2009)]. The proposed methods are tested on two datasets comprised of images obtained from 20 patients (10 male and 10 female) of clinical abdominal CT scans, and 11 foot magnetic resonance imaging (MRI) scans. The test is for four organs (liver, left and right kidneys, and spleen) segmentation, five foot bones (calcaneus, tibia, cuboid, talus, and navicular). The recognition and delineation accuracies were evaluated separately. The recognition accuracy was evaluated in terms of translation, rotation, and scale (size) error. The delineation accuracy was evaluated in terms of true and false positive volume fractions (TPVF, FPVF). The efficiency of the delineation method was also evaluated on an Intel Pentium IV PC with a 3.4 GHZ CPU machine. The recognition accuracies in terms of translation, rotation, and scale error over all organs are about 8 mm, 10 degrees and 0.03, and over all foot bones are about 3.5709 mm, 0.35 degrees and 0.025, respectively. The accuracy of delineation over all organs for all subjects as expressed in TPVF and FPVF is 93.01% and 0.22%, and all foot bones for

3D automatic anatomy segmentation based on iterative graph-cut-ASM

International Nuclear Information System (INIS)

Chen, Xinjian; Bagci, Ulas

2011-01-01

Purpose: This paper studies the feasibility of developing an automatic anatomy segmentation (AAS) system in clinical radiology and demonstrates its operation on clinical 3D images. Methods: The AAS system, the authors are developing consists of two main parts: object recognition and object delineation. As for recognition, a hierarchical 3D scale-based multiobject method is used for the multiobject recognition task, which incorporates intensity weighted ball-scale (b-scale) information into the active shape model (ASM). For object delineation, an iterative graph-cut-ASM (IGCASM) algorithm is proposed, which effectively combines the rich statistical shape information embodied in ASM with the globally optimal delineation capability of the GC method. The presented IGCASM algorithm is a 3D generalization of the 2D GC-ASM method that they proposed previously in Chen et al.[Proc. SPIE, 7259, 72590C1-72590C-8 (2009)]. The proposed methods are tested on two datasets comprised of images obtained from 20 patients (10 male and 10 female) of clinical abdominal CT scans, and 11 foot magnetic resonance imaging (MRI) scans. The test is for four organs (liver, left and right kidneys, and spleen) segmentation, five foot bones (calcaneus, tibia, cuboid, talus, and navicular). The recognition and delineation accuracies were evaluated separately. The recognition accuracy was evaluated in terms of translation, rotation, and scale (size) error. The delineation accuracy was evaluated in terms of true and false positive volume fractions (TPVF, FPVF). The efficiency of the delineation method was also evaluated on an Intel Pentium IV PC with a 3.4 GHZ CPU machine. Results: The recognition accuracies in terms of translation, rotation, and scale error over all organs are about 8 mm, 10 deg. and 0.03, and over all foot bones are about 3.5709 mm, 0.35 deg. and 0.025, respectively. The accuracy of delineation over all organs for all subjects as expressed in TPVF and FPVF is 93.01% and 0.22%, and

Low appendicular skeletal muscle mass (ASM) with limited mobility and poor health outcomes in middle-aged African Americans.

Science.gov (United States)

Malmstrom, Theodore K; Miller, Douglas K; Herning, Margaret M; Morley, John E

2013-09-01

Recent efforts to provide a consensus definition propose that sarcopenia be considered a clinical syndrome associated with the loss of both skeletal muscle mass and muscle function that occurs with aging. Validation of sarcopenia definitions that include both low muscle mass and poor muscle function is needed. In the population-based African American Health (AAH) study (N = 998 at baseline/wave 1), muscle mass and mobility were evaluated in a clinical testing center in a subsample of N = 319 persons (ages 52-68) at wave 4 (2004). Muscle mass was measured using dual energy x-ray absorptiometry and mobility by a 6-min walk test and 4-m gait walk test. Height corrected appendicular skeletal mass (ASM; 9.0 ± 1.5 in n = 124 males, 8.3 ± 2.2 in n = 195 females) was computed as total lean muscle mass in arms and legs (kilograms) divided by the square of height (meters). Cross-sectional and longitudinal (6-year) associations of low ASM (bottom 25 % AAH sample; ASM with limited mobility (4-m gait walk ≤1 m/s or 6-min walk ASM with limited mobility was associated with IADL difficulties (p = .008) and frailty (p = .040) but not with ADL difficulties or falls in cross-sectional analyses; and with ADL difficulties (p = .022), IADL difficulties (p = .006), frailty (p = .039), and mortality (p = .003) but not with falls in longitudinal analyses adjusted for age and gender. Low ASM alone was marginally associated with mortality (p = .085) but not with other outcomes in cross-sectional or longitudinal analyses. Low ASM with limited mobility is associated with poor health outcomes among late middle-aged African Americans.

A novel anti-inflammatory drug, SDZ ASM 981, for the treatment of skin diseases: in vitro pharmacology.

Science.gov (United States)

Grassberger, M; Baumruker, T; Enz, A; Hiestand, P; Hultsch, T; Kalthoff, F; Schuler, W; Schulz, M; Werner, F J; Winiski, A; Wolff, B; Zenke, G

1999-08-01

SDZ ASM 981, a novel ascomycin macrolactam derivative, has high anti-inflammatory activity in animal models of allergic contact dermatitis and shows clinical efficacy in atopic dermatitis, allergic contact dermatitis and psoriasis, after topical application. Here we report on the in vitro activities of this promising new drug. SDZ ASM 981 inhibits the proliferation of human T cells after antigen-specific or non-specific stimulation. It downregulates the production of Th1 [interleukin (IL)-2, interferon-gamma] and Th2 (IL-4, IL-10) type cytokines after antigen-specific stimulation of a human T-helper cell clone isolated from the skin of an atopic dermatitis patient. SDZ ASM 981 inhibits the phorbol myristate acetate/phytohaemagglutinin-stimulated transcription of a reporter gene coupled to the human IL-2 promoter in the human T-cell line Jurkat and the IgE/antigen-mediated transcription of a reporter gene coupled to the human tumour necrosis factor (TNF)-alpha promoter in the murine mast-cell line CPII. It does not, however, affect the human TNF-alpha promoter controlled transcription of a reporter gene in a murine dendritic cell line (DC18 RGA) after stimulation via the FcgammaRIII receptor. SDZ ASM 981 also prevents the release of preformed pro-inflammatory mediators from mast cells, as shown in the murine cell line CPII after stimulation with IgE/antigen. In summary, these results demonstrate that SDZ ASM 981 is a specific inhibitor of the production of pro-inflammatory cytokines from T cells and mast cells in vitro.

Comparative evaluation of structural integrity for ITER blanket shield block based on SDC-IC and ASME code

Energy Technology Data Exchange (ETDEWEB)

Shim, Hee-Jin [ITER Korea, National Fusion Research Institute, 169-148 Gwahak-Ro, Yuseong-Gu, Daejeon (Korea, Republic of); Ha, Min-Su, E-mail: msha12@nfri.re.kr [ITER Korea, National Fusion Research Institute, 169-148 Gwahak-Ro, Yuseong-Gu, Daejeon (Korea, Republic of); Kim, Sa-Woong; Jung, Hun-Chea [ITER Korea, National Fusion Research Institute, 169-148 Gwahak-Ro, Yuseong-Gu, Daejeon (Korea, Republic of); Kim, Duck-Hoi [ITER Organization, Route de Vinon sur Verdon - CS 90046, 13067 Sant Paul Lez Durance (France)

2016-11-01

Highlights: • The procedure of structural integrity and fatigue assessment was described. • Case studies were performed according to both SDC-IC and ASME Sec. • III codes The conservatism of the ASME code was demonstrated. • The study only covers the specifically comparable case about fatigue usage factor. - Abstract: The ITER blanket Shield Block is a bulk structure to absorb radiation and to provide thermal shielding to vacuum vessel and external vessel components, therefore the most significant load for Shield Block is the thermal load. In the previous study, the thermo-mechanical analysis has been performed under the inductive operation as representative loading condition. And the fatigue evaluations were conducted to assure structural integrity for Shield Block according to Structural Design Criteria for In-vessel Components (SDC-IC) which provided by ITER Organization (IO) based on the code of RCC-MR. Generally, ASME code (especially, B&PV Sec. III) is widely applied for design of nuclear components, and is usually well known as more conservative than other specific codes. For the view point of the fatigue assessment, ASME code is very conservative compared with SDC-IC in terms of the reflected K{sub e} factor, design fatigue curve and other factors. Therefore, an accurate fatigue assessment comparison is needed to measure of conservatism. The purpose of this study is to provide the fatigue usage comparison resulting from the specified operating conditions shall be evaluated for Shield Block based on both SDC-IC and ASME code, and to discuss the conservatism of the results.

Comparative evaluation of structural integrity for ITER blanket shield block based on SDC-IC and ASME code

International Nuclear Information System (INIS)

Shim, Hee-Jin; Ha, Min-Su; Kim, Sa-Woong; Jung, Hun-Chea; Kim, Duck-Hoi

2016-01-01

Highlights: • The procedure of structural integrity and fatigue assessment was described. • Case studies were performed according to both SDC-IC and ASME Sec. • III codes The conservatism of the ASME code was demonstrated. • The study only covers the specifically comparable case about fatigue usage factor. - Abstract: The ITER blanket Shield Block is a bulk structure to absorb radiation and to provide thermal shielding to vacuum vessel and external vessel components, therefore the most significant load for Shield Block is the thermal load. In the previous study, the thermo-mechanical analysis has been performed under the inductive operation as representative loading condition. And the fatigue evaluations were conducted to assure structural integrity for Shield Block according to Structural Design Criteria for In-vessel Components (SDC-IC) which provided by ITER Organization (IO) based on the code of RCC-MR. Generally, ASME code (especially, B&PV Sec. III) is widely applied for design of nuclear components, and is usually well known as more conservative than other specific codes. For the view point of the fatigue assessment, ASME code is very conservative compared with SDC-IC in terms of the reflected K_e factor, design fatigue curve and other factors. Therefore, an accurate fatigue assessment comparison is needed to measure of conservatism. The purpose of this study is to provide the fatigue usage comparison resulting from the specified operating conditions shall be evaluated for Shield Block based on both SDC-IC and ASME code, and to discuss the conservatism of the results.

ASME AG-1 Section FC Qualified HEPA Filters; a Particle Loading Comparison - 13435

International Nuclear Information System (INIS)

Stillo, Andrew; Ricketts, Craig I.

2013-01-01

High Efficiency Particulate Air (HEPA) Filters used to protect personnel, the public and the environment from airborne radioactive materials are designed, manufactured and qualified in accordance with ASME AG-1 Code section FC (HEPA Filters) [1]. The qualification process requires that filters manufactured in accordance with this ASME AG-1 code section must meet several performance requirements. These requirements include performance specifications for resistance to airflow, aerosol penetration, resistance to rough handling, resistance to pressure (includes high humidity and water droplet exposure), resistance to heated air, spot flame resistance and a visual/dimensional inspection. None of these requirements evaluate the particle loading capacity of a HEPA filter design. Concerns, over the particle loading capacity, of the different designs included within the ASME AG-1 section FC code[1], have been voiced in the recent past. Additionally, the ability of a filter to maintain its integrity, if subjected to severe operating conditions such as elevated relative humidity, fog conditions or elevated temperature, after loading in use over long service intervals is also a major concern. Although currently qualified HEPA filter media are likely to have similar loading characteristics when evaluated independently, filter pleat geometry can have a significant impact on the in-situ particle loading capacity of filter packs. Aerosol particle characteristics, such as size and composition, may also have a significant impact on filter loading capacity. Test results comparing filter loading capacities for three different aerosol particles and three different filter pack configurations are reviewed. The information presented represents an empirical performance comparison among the filter designs tested. The results may serve as a basis for further discussion toward the possible development of a particle loading test to be included in the qualification requirements of ASME AG-1

ASME AG-1 Section FC Qualified HEPA Filters; a Particle Loading Comparison - 13435

Energy Technology Data Exchange (ETDEWEB)

Stillo, Andrew [Camfil Farr, 1 North Corporate Drive, Riverdale, NJ 07457 (United States); Ricketts, Craig I. [New Mexico State University, Department of Engineering Technology and Surveying Engineering, P.O. Box 30001 MSC 3566, Las Cruces, NM 88003-8001 (United States)

2013-07-01

High Efficiency Particulate Air (HEPA) Filters used to protect personnel, the public and the environment from airborne radioactive materials are designed, manufactured and qualified in accordance with ASME AG-1 Code section FC (HEPA Filters) [1]. The qualification process requires that filters manufactured in accordance with this ASME AG-1 code section must meet several performance requirements. These requirements include performance specifications for resistance to airflow, aerosol penetration, resistance to rough handling, resistance to pressure (includes high humidity and water droplet exposure), resistance to heated air, spot flame resistance and a visual/dimensional inspection. None of these requirements evaluate the particle loading capacity of a HEPA filter design. Concerns, over the particle loading capacity, of the different designs included within the ASME AG-1 section FC code[1], have been voiced in the recent past. Additionally, the ability of a filter to maintain its integrity, if subjected to severe operating conditions such as elevated relative humidity, fog conditions or elevated temperature, after loading in use over long service intervals is also a major concern. Although currently qualified HEPA filter media are likely to have similar loading characteristics when evaluated independently, filter pleat geometry can have a significant impact on the in-situ particle loading capacity of filter packs. Aerosol particle characteristics, such as size and composition, may also have a significant impact on filter loading capacity. Test results comparing filter loading capacities for three different aerosol particles and three different filter pack configurations are reviewed. The information presented represents an empirical performance comparison among the filter designs tested. The results may serve as a basis for further discussion toward the possible development of a particle loading test to be included in the qualification requirements of ASME AG-1

ASME Evaluation on Grid Mobile E-Commerce Process

OpenAIRE

Dan Chang; Wei Liao

2012-01-01

With the development of E-commerce, more scholars have paid attention to research on Mobile E-commerce and mostly focus on the optimization and evaluation of existing process. This paper researches the evaluation of Mobile E-commerce process with a method called ASME. Based on combing and analyzing current mobile business process and utilizing the grid management theory, mobile business process based on grid are constructed. Firstly, the existing process, namely Non-grid Mobile E-commerce, an...

Conservatism of ASME KIR-reference curve with respect to crack arrest

International Nuclear Information System (INIS)

Wallin, K.; Rintamaa, R.; Nagel, G.

1999-01-01

The conservatism of the RT NDT temperature indexing parameter and the ASME K IR -reference curve with respect to crack arrest toughness, has been evaluated. Based on an analysis of the original ASME K Ia data, it was established that inherently, the ASME K IR -reference curve corresponds to an overall 5% lower bound curve with respect to crack arrest. It was shown that the scatter of crack arrest toughness is essentially material independent and has a standard deviation of 18% and the temperature dependence of K Ia has the same form as predicted by the master curve for crack initiation toughness. The 'built in' offset between the mean 100 MPa√(m) crack arrest temperature, TK Ia , and RT NDT is 38 C (TK Ia =RT NDT +38 C) and the experimental relation between TK Ia and NDT is, TK Ia =NDT+28 C. The K IR -reference curve using NDT as reference temperature will be conservative with respect to the general 5% lower bound K Ia(5%) -curve, with a 75% confidence. The use of RT NDT , instead of NDT, will generally increase the degree of conservatism, both for non-irradiated as well as irradiated materials, close to a 95% confidence level. This trend is pronounced for materials with Charpy-V upper shelf energies below 100 J. It is shown that the K IR -curve effectively constitutes a deterministic lower bound curve for crack arrest. The findings are valid both for nuclear pressure vessel plates, forgings and welds. (orig.)

Conservatism of ASME KIR-reference curve with respect to crack arrest

International Nuclear Information System (INIS)

Wallin, K.; Rintamaa, R.; Nagel, G.

2001-01-01

The conservatism of the RT NDT temperature indexing parameter and the ASME K IR -reference curve with respect to crack arrest toughness, has been evaluated. Based on an analysis of the original ASME K Ia data, it was established that inherently, the ASME K IR -reference curve corresponds to an overall 5% lower bound curve with respect to crack arrest. It was shown that the scatter of crack arrest toughness is essentially material independent and has a standard deviation (S.D.) of 18% and the temperature dependence of K Ia has the same form as predicted by the master curve for crack initiation toughness. The 'built in' offset between the mean 100 MPa√m crack arrest temperature, TK Ia , and RT NDT is 38 deg. C (TK Ia =RT NDT +38 deg. C) and the experimental relation between TK Ia and NDT is, TK Ia =NDT+28 deg. C. The K IR -reference curve using NDT as reference temperature will be conservative with respect to the general 5% lower bound K Ia(5%) -curve, with a 75% confidence. The use of RT NDT , instead of NDT, will generally increase the degree of conservatism, both for non-irradiated as well as irradiated materials, close to a 95% confidence level. This trend is pronounced for materials with Charpy-V upper shelf energies below 100 J. It is shown that the K IR -curve effectively constitutes a deterministic lower bound curve for crack arrest The findings are valid both for nuclear pressure vessel plates, forgings and welds

New Regional and Global HFC Projections and Effects of National Regulations and Montreal Protocol Amendment Proposals

Science.gov (United States)

Velders, G. J. M.

2015-12-01

Hydrofluorocarbons (HFCs) are used as substitutes for ozone-depleting substances that are being phased out globally under Montreal Protocol regulations. New global scenarios of HFC emissions reach 4.0-5.3 GtCO2-eq yr-1 in 2050, which corresponds to a projected growth from 2015 to 2050 which is 9% to 29% of that for CO2 over the same time period. New baseline scenarios are formulated for 10 HFC compounds, 11 geographic regions, and 13 use categories. These projections are the first to comprehensively assess production and consumption of individual HFCs in multiple use sectors and geographic regions with emission estimates constrained by atmospheric observations. In 2050, in percent of global HFC emissions, China (~30%), India and the rest of Asia (~25%), Middle East and northern Africa (~10%), and USA (~10%) are the principal source regions; and refrigeration and stationary air conditioning are the major use sectors. National regulations to limit HFC use have been adopted recently in the European Union, Japan and USA, and four proposals have been submitted in 2015 to amend the Montreal Protocol to substantially reduce growth in HFC use. Calculated baseline emissions are reduced by 90% in 2050 by implementing the North America Montreal Protocol amendment proposal. Global adoption of technologies required to meet national regulations would be sufficient to reduce 2050 baseline HFC consumption by more than 50% of that achieved with the North America proposal for most developed and developing countries. The new HFC scenarios and effects of national regulations and Montreal Protocol amendment proposals will be presented.

Statistical analysis of geomagnetic field intensity differences between ASM and VFM instruments onboard Swarm constellation

Science.gov (United States)

De Michelis, Paola; Tozzi, Roberta; Consolini, Giuseppe

2017-02-01

From the very first measurements made by the magnetometers onboard Swarm satellites launched by European Space Agency (ESA) in late 2013, it emerged a discrepancy between scalar and vector measurements. An accurate analysis of this phenomenon brought to build an empirical model of the disturbance, highly correlated with the Sun incidence angle, and to correct vector data accordingly. The empirical model adopted by ESA results in a significant decrease in the amplitude of the disturbance affecting VFM measurements so greatly improving the vector magnetic data quality. This study is focused on the characterization of the difference between magnetic field intensity measured by the absolute scalar magnetometer (ASM) and that reconstructed using the vector field magnetometer (VFM) installed on Swarm constellation. Applying empirical mode decomposition method, we find the intrinsic mode functions (IMFs) associated with ASM-VFM total intensity differences obtained with data both uncorrected and corrected for the disturbance correlated with the Sun incidence angle. Surprisingly, no differences are found in the nature of the IMFs embedded in the analyzed signals, being these IMFs characterized by the same dominant periodicities before and after correction. The effect of correction manifests in the decrease in the energy associated with some IMFs contributing to corrected data. Some IMFs identified by analyzing the ASM-VFM intensity discrepancy are characterized by the same dominant periodicities of those obtained by analyzing the temperature fluctuations of the VFM electronic unit. Thus, the disturbance correlated with the Sun incidence angle could be still present in the corrected magnetic data. Furthermore, the ASM-VFM total intensity difference and the VFM electronic unit temperature display a maximal shared information with a time delay that depends on local time. Taken together, these findings may help to relate the features of the observed VFM-ASM total intensity

Simulation of municipal-industrial full scale WWTP in an arid climate by application of ASM3

Directory of Open Access Journals (Sweden)

Abdelsalam Elawwad

2017-03-01

Full Text Available In developing countries, and due to the high cost of treatment of industrial wastewater, municipal wastewater treatment facilities usually receive a mixture of municipal wastewater and partially treated industrial wastewater. As a result, an increased potential for shock loads with high pollutant concentrations is expected. The use of mathematical modelling of wastewater treatment is highly efficient in such cases. A dynamic model based on activated sludge model no. 3 (ASM3 describing the performance of the activated sludge process at a full scale wastewater treatment plant (WWTP receiving mixed domestic–industrial wastewater located in an arid area is presented. ASM3 was extended by adding the Arrhenius equation to respond to changes in temperature. BioWin software V.4 was used as the model platform. The model was calibrated under steady-state conditions, adjusting only three kinetic and stoichiometric parameters: maximum heterotrophic growth rate (μH = 8 d−1, heterotrophic aerobic decay rate (bH, O2 = 0.18 d−1, and aerobic heterotrophic yield (YH,O2 = 0.4 (gCOD/gCOD. ASM3 was successful in predicting the WWTP performance, as the model was validated with 10 months of routine daily measurements. ASM3 extended with the Arrhenius equation could be helpful in the design and operation of WWTPs with mixed municipal–industrial influent in arid areas.

Spectrum of SMPD1 mutations in Asian-Indian patients with acid sphingomyelinase (ASM)-deficient Niemann-Pick disease.

Science.gov (United States)

Ranganath, Prajnya; Matta, Divya; Bhavani, Gandham SriLakshmi; Wangnekar, Savita; Jain, Jamal Mohammed Nurul; Verma, Ishwar C; Kabra, Madhulika; Puri, Ratna Dua; Danda, Sumita; Gupta, Neerja; Girisha, Katta M; Sankar, Vaikom H; Patil, Siddaramappa J; Ramadevi, Akella Radha; Bhat, Meenakshi; Gowrishankar, Kalpana; Mandal, Kausik; Aggarwal, Shagun; Tamhankar, Parag Mohan; Tilak, Preetha; Phadke, Shubha R; Dalal, Ashwin

2016-10-01

Acid sphingomyelinase (ASM)-deficient Niemann-Pick disease is an autosomal recessive lysosomal storage disorder caused by biallelic mutations in the SMPD1 gene. To date, around 185 mutations have been reported in patients with ASM-deficient NPD world-wide, but the mutation spectrum of this disease in India has not yet been reported. The aim of this study was to ascertain the mutation profile in Indian patients with ASM-deficient NPD. We sequenced SMPD1 in 60 unrelated families affected with ASM-deficient NPD. A total of 45 distinct pathogenic sequence variants were found, of which 14 were known and 31 were novel. The variants included 30 missense, 4 nonsense, and 9 frameshift (7 single base deletions and 2 single base insertions) mutations, 1 indel, and 1 intronic duplication. The pathogenicity of the novel mutations was inferred with the help of the mutation prediction software MutationTaster, SIFT, Polyphen-2, PROVEAN, and HANSA. The effects of the identified sequence variants on the protein structure were studied using the structure modeled with the help of the SWISS-MODEL workspace program. The p. (Arg542*) (c.1624C>T) mutation was the most commonly identified mutation, found in 22% (26 out of 120) of the alleles tested, but haplotype analysis for this mutation did not identify a founder effect for the Indian population. To the best of our knowledge, this is the largest study on mutation analysis of patients with ASM-deficient Niemann-Pick disease reported in literature and also the first study on the SMPD1 gene mutation spectrum in India. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Comparison of ASME pressure–temperature limits on the fracture probability for a pressurized water reactor pressure vessel

International Nuclear Information System (INIS)

Chou, Hsoung-Wei; Huang, Chin-Cheng

2017-01-01

Highlights: • P-T limits based on ASME K_I_a curve, K_I_C curve and RI method are presented. • Probabilistic and deterministic methods are used to evaluate P-T limits on RPV. • The feasibility of substituting P-T curves with more operational is demonstrated. • Warm-prestressing effect is critical in determining the fracture probability. - Abstract: The ASME Code Section XI-Appendix G defines the normal reactor startup (heat-up) and shut-down (cool-down) operation limits according to the fracture toughness requirement of reactor pressure vessel (RPV) materials. This paper investigates the effects of different pressure-temperature limit operations on structural integrity of a Taiwan domestic pressurized water reactor (PWR) pressure vessel. Three kinds of pressure-temperature limits based on different fracture toughness requirements – the K_I_a fracture toughness curve of ASME Section XI-Appendix G before 1998 editions, the K_I_C fracture toughness curve of ASME Section XI-Appendix G after 2001 editions, and the risk-informed revision method supplemented in ASME Section XI-Appendix G after 2013 editions, respectively, are established as the loading conditions. A series of probabilistic fracture mechanics analyses for the RPV are conducted employing ORNL’s FAVOR code considering various radiation embrittlement levels under these pressure-temperature limit conditions. It is found that the pressure-temperature operation limits which provide more operational flexibility may lead to higher fracture risks to the RPV. The cladding-induced shallow surface breaking flaws are the most critical and dominate the fracture probability of the RPV under pressure-temperature limit transients. Present study provides a risk-informed reference for the operation safety and regulation viewpoint of PWRs in Taiwan.

Interpretation, with respect to ASME code Case N-318, of limit moment and fatigue tests of lugs welded to pipe

International Nuclear Information System (INIS)

Foster, D.C.; Van Duyne, D.A.; Budlong, L.A.; Muffett, J.W.; Wais, E.A.; Streck, G.; Rodabaugh, E.C.

1990-01-01

Two nonmandatory ASME code cases have been used often in the evaluation of lugs on nuclear-power- plant piping systems. ASME Code Case N-318 provides guidance for evaluation of the design of rectangular cross-section attachments on Class 2 or 3 piping, and ASME Code Case N-122 provides guidance for evaluation of lugs on Class 1 piping. These code cases have been reviewed and evaluated based on available test data. The results indicate that the Code cases are overly conservative. Recommendations for revisions to the cases are presented which, if adopted, will reduce the overconservatism

ASFMRA Chapter Strategic Planning: Iowa Chapter Case Study

OpenAIRE

Trede, Larry

2006-01-01

This paper summarizes the strategic planning process used by the Iowa Chapter of the American Society of Farm Managers and Rural Appraisers to develop a new vision, mission statement, and chapter objectives. Procedures included the use of a focus group and a quantitative survey. The results indicated a strong need for chapter member continuing education, a chapter member services program, and a strong outreach/public relations program. As a result of the strategic planning process, a new chap...

Review of the margins for ASME code fatigue design curve - effects of surface roughness and material variability

International Nuclear Information System (INIS)

Chopra, O. K.; Shack, W. J.

2003-01-01

The ASME Boiler and Pressure Vessel Code provides rules for the construction of nuclear power plant components. The Code specifies fatigue design curves for structural materials. However, the effects of light water reactor (LWR) coolant environments are not explicitly addressed by the Code design curves. Existing fatigue strain-vs.-life ((var e psilon)-N) data illustrate potentially significant effects of LWR coolant environments on the fatigue resistance of pressure vessel and piping steels. This report provides an overview of the existing fatigue (var e psilon)-N data for carbon and low-alloy steels and wrought and cast austenitic SSs to define the effects of key material, loading, and environmental parameters on the fatigue lives of the steels. Experimental data are presented on the effects of surface roughness on the fatigue life of these steels in air and LWR environments. Statistical models are presented for estimating the fatigue (var e psilon)-N curves as a function of the material, loading, and environmental parameters. Two methods for incorporating environmental effects into the ASME Code fatigue evaluations are discussed. Data available in the literature have been reviewed to evaluate the conservatism in the existing ASME Code fatigue evaluations. A critical review of the margins for ASME Code fatigue design curves is presented

Review of the margins for ASME code fatigue design curve - effects of surface roughness and material variability.

Energy Technology Data Exchange (ETDEWEB)

Chopra, O. K.; Shack, W. J.; Energy Technology

2003-10-03

The ASME Boiler and Pressure Vessel Code provides rules for the construction of nuclear power plant components. The Code specifies fatigue design curves for structural materials. However, the effects of light water reactor (LWR) coolant environments are not explicitly addressed by the Code design curves. Existing fatigue strain-vs.-life ({var_epsilon}-N) data illustrate potentially significant effects of LWR coolant environments on the fatigue resistance of pressure vessel and piping steels. This report provides an overview of the existing fatigue {var_epsilon}-N data for carbon and low-alloy steels and wrought and cast austenitic SSs to define the effects of key material, loading, and environmental parameters on the fatigue lives of the steels. Experimental data are presented on the effects of surface roughness on the fatigue life of these steels in air and LWR environments. Statistical models are presented for estimating the fatigue {var_epsilon}-N curves as a function of the material, loading, and environmental parameters. Two methods for incorporating environmental effects into the ASME Code fatigue evaluations are discussed. Data available in the literature have been reviewed to evaluate the conservatism in the existing ASME Code fatigue evaluations. A critical review of the margins for ASME Code fatigue design curves is presented.

Choix linguistiques, changements et alternances de langue: Les comportements multilingues des italophones de Montreal (Linguistic Choices, Changes, and Code Switching: The Linguistics Behaviors of Italophones of Montreal).

Science.gov (United States)

Labrie, Normand

A study of 15 fathers and their 16 sons in an italophone community in Montreal (Canada) focused on the usage of Italian, French, and English in communication between generations and in a variety of activities. Data were drawn from 45 hours of taped conversation in home and work settings, which included 4,848 instances of language contact. Of the…

Historic cohort study in Montreal's fur industry.

Science.gov (United States)

Guay, D; Siemiatycki, J

1987-01-01

A historic cohort mortality study was carried out among two groups of male workers in the Montreal fur industry: 263 dressers and dyers and 599 fur garment manufacturers. The first group is exposed to a very wide variety of chemicals used in tanning, cleaning, and dyeing fur, including substances considered to be carcinogenic and/or mutagenic. The second group is exposed to residue from the dressing and dyeing stage and to respirable fur dust. The cohorts consisted of all active members of two unions as of January 1, 1966. The mean age of the workers was 43.2 and the mean number of years since first employment 14.1. The follow-up period was from January 1, 1966, to December 31, 1981; 95% of the workers were successfully traced. Observed deaths were compared with those expected based on mortality rates of the population of metropolitan Montreal. Standardized mortality ratios (SMRs) for the manufacturers were significantly low, probably because of the ethnic composition of the cohort and a healthy worker effect. SMRs for the dressers and dyers were also low, but not as low as for the manufacturers. When attention was restricted to the French Canadians in the cohort, the observed deaths were close to the expected; there was a noteworthy excess of colorectal cancer (four observed, 0.8 expected) for dressers and dyers. Apart from this weak suggestive evidence, the results did not indicate any excess mortality risks in the fur industry. However, because of the relatively small number of expected and observed deaths in the cohort and especially among the heavily exposed dressers and dyers, the confidence intervals around SMR estimates were wide and excess risks cannot be ruled out.

The Montreal Protocol's multilateral fund and sustainable development

International Nuclear Information System (INIS)

Luken, Ralph; Grof, Tamas

2006-01-01

The 1987 Montreal Protocol is widely seen as a global environmental accord that has produced tangible results in terms of reductions in ozone-depleting substances. In addition, there have been other benefits, largely unrecognized and undocumented, that can best be characterized in a sustainable development framework based on a review of 50 out of 931 projects implemented over a 13 year period by one of the four implementing agencies of the Multilateral Fund for the Implementation of the Montreal Protocol. All investment projects have reduced ozone depleting potential and global warming potential. Some projects have reduced atmospheric emissions and contamination of groundwater. Other projects have increased the competitiveness of enterprises in domestic and international markets and have sustained and in a few cases created employment opportunities. Others, fewer in number, have potentially contributed to environmental problems, have initially created difficulties in maintaining productivity and quality standards and have decreased the number of employment opportunities because of the need to rationalize manufacturing processes. The potential contributions from Multilateral Fund investment projects to sustainable development could probably have been amplified with project design guidance for the technical staffs of all three implementing agencies executing investment projects. In thinking about other multilateral environmental agreements, one can see the need for similar guidance for Global Environment Facility funded projects supporting the focal areas of climate change, international waters, ozone depletion and persistent organic pollutants. Some of them have the potential to generate multiple beneficial impacts in addition to their stated environmental objective if designed and implemented within a sustainable development framework. (author)

Flujo espiratorio máximo en niños asmáticos: Casos y controles

Directory of Open Access Journals (Sweden)

Arturo Recabarren Lozada

1995-04-01

Full Text Available Con el fin de determinar las variaciones del Flujo Espiratorio Máximo (PEF, se estudiaron a 38 niños asmáticos (CASOS en período intercrítico de la enfermedad y a 38 niños sanos (CONTROLES, de ambos sexos comprendidos entre los 5 y 15 años de edad. Los niños asmáticos fueron clasificados por parámetros clínicos en determinado grado de severidad de asma bronquial, determinando el PEF de cada niño objeto de estudio conel mini-Wright Peak Flow Meter, en 2 registros diarios a los 06 y 18 horas, durante 7 días consecutivos, obteniendo la variabilidad del mismo. Se encuentra diferencia en la variabilidad global de niños asmáticos de todos los grados de severidad de la enfermedad comprada con la de los niños normales, con diferencia estadística altamente significativa (p<0.000001. Las variaciones diurnas del PEF ayuda en el diagnóstico del asma bronquial y también son útiles para realizar la catalogación de severidad de la enfermedad. El PEF correlaciona bien con los síntomas presentados por los pacientes y por lo tanto guarda correspondencia con la Hiperreactividad bronquial (HRB del niño asmático. Postulamos que un niño con historia clínica sugestiva, una variabilidad global mayor del 8% indica que el diagnóstico de asma es altamente probable (Rev Med Hered 1995; 6: 76-82

Statistical re-evaluation of the ASME KIC and KIR fracture toughness reference curves

International Nuclear Information System (INIS)

Wallin, K.

1999-01-01

Historically the ASME reference curves have been treated as representing absolute deterministic lower bound curves of fracture toughness. In reality, this is not the case. They represent only deterministic lower bound curves to a specific set of data, which represent a certain probability range. A recently developed statistical lower bound estimation method called the 'master curve', has been proposed as a candidate for a new lower bound reference curve concept. From a regulatory point of view, the master curve is somewhat problematic in that it does not claim to be an absolute deterministic lower bound, but corresponds to a specific theoretical failure probability that can be chosen freely based on application. In order to be able to substitute the old ASME reference curves with lower bound curves based on the master curve concept, the inherent statistical nature (and confidence level) of the ASME reference curves must be revealed. In order to estimate the true inherent level of safety, represented by the reference curves, the original database was re-evaluated with statistical methods and compared to an analysis based on the master curve concept. The analysis reveals that the 5% lower bound master curve has the same inherent degree of safety as originally intended for the K IC -reference curve. Similarly, the 1% lower bound master curve corresponds to the K IR -reference curve. (orig.)

Statistical re-evaluation of the ASME KIC and KIR fracture toughness reference curves

International Nuclear Information System (INIS)

Wallin, K.; Rintamaa, R.

1998-01-01

Historically the ASME reference curves have been treated as representing absolute deterministic lower bound curves of fracture toughness. In reality, this is not the case. They represent only deterministic lower bound curves to a specific set of data, which represent a certain probability range. A recently developed statistical lower bound estimation method called the 'Master curve', has been proposed as a candidate for a new lower bound reference curve concept. From a regulatory point of view, the Master curve is somewhat problematic in that it does not claim to be an absolute deterministic lower bound, but corresponds to a specific theoretical failure probability that can be chosen freely based on application. In order to be able to substitute the old ASME reference curves with lower bound curves based on the master curve concept, the inherent statistical nature (and confidence level) of the ASME reference curves must be revealed. In order to estimate the true inherent level of safety, represented by the reference curves, the original data base was re-evaluated with statistical methods and compared to an analysis based on the master curve concept. The analysis reveals that the 5% lower bound Master curve has the same inherent degree of safety as originally intended for the K IC -reference curve. Similarly, the 1% lower bound Master curve corresponds to the K IR -reference curve. (orig.)

Summary of design of nuclear vessels and piping to ASME III (NB, NC, ND) and vessels to BS 5500

International Nuclear Information System (INIS)

Harrop, L.P.

1992-01-01

There is a hierarchy of design code requirements for pressurised components, starting with non-nuclear codes as the minimum and progressing through the ASME III nuclear Classes 3, 2, 1. In establishing and assessing the safety justifications of nuclear plants it is important to have an appreciation of the gradation of requirements in the ASME III design rules and how these go beyond non-nuclear component design rules. There are two broad aspects to the structural integrity of pressurised components, namely the achievement of integrity and the demonstration of integrity. The technical requirements of design codes are associated with achieving integrity while the documentary aspects are usually associated with demonstrating integrity. In practice documents also have a part in achieving integrity in the communication of information between different organisations and personnel involved in the design process. It is not possible to assign simple numerical measures to the relative integrity afforded by non-nuclear codes and the three Classes of ASME III. Instead it is necessary to compare the different requirements of the rules for the various technical and documentary aspects. This paper summarises the most important technical and documentary aspects of the three Classes of the ASME III Code for vessels and the non-nuclear code BS 5500. A similar summary is also provided for the three Classes of ASME III rules for piping. The intention is that the paper provides a basis for appreciating the relative integrity afforded by these various rules. (author)

Application of ASME code AG-1 to YGN 3 ampersand 4 plants, South Korea

International Nuclear Information System (INIS)

Kim, Y.K.; Porco, R.D.; York, Y.D.

1993-01-01

Yonggwang Nuclear Power Plant Units 3 ampersand 4 are located on the southwestern coast of South Korea on the Yellow Sea. The plant is owned by Korea Electric Power Corp. (KEPCO), with the engineering being performed by Korea Power Engineering Co., Inc. (KOPEC) and Sargent and Lundy under a technology transfer agreement. The plants are both 950 Megawatt (electric) pressurized water reactors of US design. Under contract to KEPCO, Korea Heavy Industries and Construction Co., Ltd. and Ellis and Watts, Division of Dynamics Corporation of America, Batavia, Ohio, supplied major components to the YGN plants in compliance to ASME AG-1. These components included safety related Air Cleaning Units, Reactor containment Fan Cooler Units, Air Handling Units, Cubicle Coolers, Duct Electric Heaters, and fans. This paper details the extent of applicability of ASME Code AG-1 to the specific equipment, description of the equipment, conformance, testing, and design required. The paper also discusses the problems encountered in implementing ASME AG-1, working around Code sections that were not complete at contract inception, conflicts in project documents and related problems. Also discussed are the logistics problems, material availability, and quality assurance aspects complicating the applications of ASME AG-1, due to the required Korean content for some components. Based on successfully supplying the equipment referenced above, it has been concluded that AG-1 is a working document and can be successfully implemented. It provides the requirements necessary for performance, design, construction, acceptance testing, and quality assurance of equipment used as components in nuclear air and gas treatment systems in nuclear facilities. The paper also addresses lessons learned and aspects of mixing US design and US built components in Korean built assemblies

Comparison of the ASME Environmental Fatigue Design Curve with the Leax' Low Bound Model

International Nuclear Information System (INIS)

Jeong, Ill Seok; Kim, Wan Jae; Jun, Hyun Ik

2010-01-01

Environmental fatigue issue long time argued between industry and regulator. The issues of the debates are about environmental fatigue data only from experiment laboratories, no evidences in fields, and over conservatism. However, NRC issued the requirement to implement it to the construction design prior to industry practical design code. American Society of Mechanical Engineers (ASME) determined to issue non-mandatory code cases of environmental fatigue design. This paper evaluated the conservatism of the ASME proposed environmental fatigue design curve in comparison with the Leax' low bound approach model of environmental fatigue curve. A group of CF8M cast austenitic stainless steel (CASS) produced in KEPCO Research Center was introduced in the evaluation

46 CFR 54.01-2 - Adoption of division 1 of section VIII of the ASME Boiler and Pressure Vessel Code.

Science.gov (United States)

2010-10-01

... Boiler and Pressure Vessel Code. 54.01-2 Section 54.01-2 Shipping COAST GUARD, DEPARTMENT OF HOMELAND... division 1 of section VIII of the ASME Boiler and Pressure Vessel Code. (a) Pressure vessels shall be designed, constructed, and inspected in accordance with section VIII of the ASME Boiler and Pressure Vessel...

Effects of ASM-024, a modulator of acetylcholine receptor function, on airway responsiveness and allergen-induced responses in patients with mild asthma.

Science.gov (United States)

Boulet, Louis-Philippe; Gauvreau, Gail M; Cockcroft, Donald W; Davis, Beth; Vachon, Luc; Cormier, Yvon; O'Byrne, Paul M

2015-01-01

To evaluate the safety, tolerability and clinical activity of ASM-024, a new cholinergic compound with dual nicotinic and muscarinic activity, in mild allergic asthma. The present study involved 24 stable, mild allergic asthmatic subjects. In a cross-over design, ASM-024 (50 mg or 200 mg) or placebo were administered once daily by nebulization over three periods of nine consecutive days separated by a three-week washout. The effect of each treatment on the forced expiratory volume in 1 s (FEV1), provocative concentration of methacholine causing a 20% decline in FEV1 (PC20), early and late asthmatic responses, and allergen-induced inflammation were measured. Seventeen subjects completed the study. During treatment with ASM-024 at 50 mg or 200 mg, the PC20 value increased respectively from a mean (± SD) 2.56±3.86 mg/mL to 4.11 mg/mL (P=0.007), and from 3.12±4.37 mg/mL to 5.23 mg/mL (P=0.005) (no change with placebo). On day 7 (day preceding allergen challenge), postdosing FEV1 increased by 2.0% with 50 mg (P=0.005) and 1.9% with 200 mg (P=0.008) (placebo -1.1%). ASM-24 had no inhibitory effect on early and late asthmatic responses, nor on sputum eosinophil or neutrophil levels. ASM-024 induced no serious adverse events, but caused cough in 22% and 48% of the subjects with 50 mg and 200 mg, respectively, compared with 10% who were on placebo. ASM-024 did not inhibit allergen-induced asthmatic response and related airway inflammation, but reduced methacholine airway responsiveness and slightly improved lung function. The mechanism by which ASM-024 improves these outcomes requires further study.

IL-17A acts via p38 MAPK to increase stability of TNF-alpha-induced IL-8 mRNA in human ASM.

Science.gov (United States)

Henness, Sheridan; van Thoor, Eveline; Ge, Qi; Armour, Carol L; Hughes, J Margaret; Ammit, Alaina J

2006-06-01

Human airway smooth muscle (ASM) plays an immunomodulatory role in asthma. Recently, IL-17A has become of increasing interest in asthma, being found at elevated levels in asthmatic airways and emerging as playing an important role in airway neutrophilia. IL-17A predominantly exerts its neutrophil orchestrating role indirectly via the induction of cytokines by resident airway structural cells. Here, we perform an in vitro study to show that although IL-17A did not induce secretion of the CXC chemokine IL-8 from ASM cells, IL-17A significantly potentiates TNF-alpha-induced IL-8 protein secretion and gene expression in a concentration- and time-dependent manner (P ASM cells, acting via a p38 MAPK-dependent posttranscriptional pathway to augment TNF-alpha-induced secretion of the potent neutrophil chemoattractant IL-8 from ASM cells.

Understanding the Long-Term Spectral Variability of Cygnus X-1 from BATSE and ASM Observations

Science.gov (United States)

Zdziarski, Andrzej A.; Poutanen, Juri; Paciesas, William S.; Wen, Linqing; Six, N. Frank (Technical Monitor)

2002-01-01

We present a spectral analysis of observations of Cygnus X-1 by the RXTE/ASM (1.5-12 keV) and CGRO/BATSE (20-300 keV), including about 1200 days of simultaneous data. We find a number of correlations between intensities and hardnesses in different energy bands from 1.5 keV to 300 keV. In the hard (low) spectral state, there is a negative correlation between the ASM 1.5-12 keV flux and the hardness at any energy. In the soft (high) spectral state, the ASM flux is positively correlated with the ASM hardness (as previously reported) but uncorrelated with the BATSE hardness. In both spectral states, the BATSE hardness correlates with the flux above 100 keV, while it shows no correlation with the flux in the 20-100 keV range. At the same time, there is clear correlation between the BATSE fluxes below and above 100 keV. In the hard state, most of the variability can be explained by softening the overall spectrum with a pivot at approximately 50 keV. The observations show that there has to be another, independent variability pattern of lower amplitude where the spectral shape does not change when the luminosity changes. In the soft state, the variability is mostly caused by a variable hard (Comptonized) spectral component of a constant shape superimposed on a constant soft blackbody component. These variability patterns are in agreement with the dependence of the rms variability on the photon energy in the two states. We interpret the observed correlations in terms of theoretical Comptonization models. In the hard state, the variability appears to be driven mostly by changing flux in seed photons Comptonized in a hot thermal plasma cloud with an approximately constant power supply. In the soft state, the variability is consistent with flares of hybrid, thermal/nonthermal, plasma with variable power above a stable cold disk. Also, based on broadband pointed observations simultaneous with those of the ASM and BATSE, we find the intrinsic bolometric luminosity increases by a

High temperature structural integrity evaluation method and application studies by ASME-NH for the next generation reactor design

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Lee, Jae Han

2006-01-01

The main purpose of this paper is to establish the high temperature structural integrity evaluating procedures for the next generation reactors, which are to be operated at over 500 .deg. C and for 60 years. To do this, comparison studies of the high temperature structural design codes and assessment procedures such as the ASME-NH (USA), RCC-MR (France), DDS (Japan), and R5 (UK) are carried out in view of the accumulated inelastic strain and the creep-fatigue damage evaluations. Also the application procedures of the ASME-NH rules with the actual thermal and structural analysis results are described in detail. To overcome the complexity and the engineering costs arising from a real application of the ASME-NH rules by hand, all the procedures established in this study such as the time-dependent primary stress limits, total accumulated creep ratcheting strain limits, and the creep-fatigue damage limits are computerized and implemented into the SIE ASME-NH program. Using this program, the selected high temperature structures subjected to two cycle types are evaluated and the parametric studies for the effects of the time step size, primary load, number of cycles, normal temperature for the creep damage evaluations and the effects of the load history on the creep ratcheting strain calculations are investigated

Modification of the ASME code z-factor for circumferential surface crack in nuclear ferritic pipings

International Nuclear Information System (INIS)

Choi, Young Hwan; Chung, Yon Ki; Koh, Wan Young; Lee, Joung Bae

1996-01-01

The purpose of this paper is to modify the ASME Code Z-Factor, which is used in the evaluation of circumferential surface crack in nuclear ferritic pipings. The ASME Code Z-Factor is a load multiplier to compensate plastic load with elasto-plastic load. The current ASME Code Z-Factor underestimates pipe maximum load. In this study, the original SC. TNP method is modified first because the original SC. TNP method has a problem that the maximum allowable load predicted from the original SC. TNP method is slightly higher than that measured from the experiment. Then the new Z-Factor is developed using the modified SC. TNP method. The desirability of both the modified SC. TNP method and the new Z-Factor is examined using the experimental results for the circumferential surface crack in pipings. The results show that (1) the modified SC. TNP method is good for predicting the circumferential surface crack behavior in pipings, and (2) the Z-Factor obtained from the modified SC. TNP method well predicts the behavior of circumferential surface crack in ferritic pipings. 30 refs., 13 figs., 4 tabs. (author)

Iterative and non-iterative solutions of engine flows using ASM and k-ε turbulence models

International Nuclear Information System (INIS)

Khaleghi, H.; Fallah, E.

2003-01-01

Various turbulent models are widely developed in order to make a good prediction of turbulence phenomena in different applications. The standard k-ε model shows a poor prediction for some applications. The Reynolds Stress Model (RSM) is expected to give a better prediction of turbulent characteristics, because a separate differential equation for each Reynolds stress component is solved in this model. In order to save both time and memory in this calculation a new Algebraic Stress Model (ASM) which was developed by Lumly et al in 1995 is used for calculations of flow characteristics in the internal combustion engine chamber. With using turbulent realizability principles, this model becomes a powerful and reliable turbulence model. In this paper the abilities of the model is examined in internal combustion engine flows. The results of ASM and k-ε models are compared with the experimental data. It is shown that the poor predictions of k-ε model are modified by ASM model. Also in this paper non-iterative PISO and iterative SIMPLE solution algorithms are compared. The results show that the PISO solution algorithm is the preferred and more efficient procedure in the calculation of internal combustion engine. (author)

Economics of "essential use exemptions" for metered-dose inhalers under the Montreal Protocol.

Science.gov (United States)

DeCanio, Stephen J; Norman, Catherine S

2007-10-01

The Montreal Protocol on Substances that Deplete the Ozone Layer has led to rapid reductions in the use of ozone-depleting substances worldwide. However, the Protocol provides for "essential use exemptions" (EUEs) if there are no "technically and economically feasible" alternatives. An application that might qualify as an "essential use" is CFC-powered medical metered-dose inhalers (MDIs) for the treatment of asthma and chronic obstructive pulmonary disease (COPD), and the US and other nations have applied for exemptions in this case. One concern is that exemptions are necessary to ensure access to medications for low-income uninsureds. We examine the consequences of granting or withholding such exemptions, and conclude that government policies and private-sector programs are available that make it economically feasible to phase out chlorofluorocarbons (CFCs) in this application, thereby furthering the global public health objectives of the Montreal Protocol without compromising the treatment of patients who currently receive medication by means of MDIs.

Adoption of ASME Code Section XI for ISI to Research Reactors

International Nuclear Information System (INIS)

Tawfik, Y.E.; El-sesy, I.A.; Shaban, H.I.; Ibrahim, M.M.

2002-01-01

ETRR-2 (Second Egyptian thermal research reactor) is a multi-purpose, pool- type reactor with an open water surface and variable core arrangement. The core power is 22 MWth, cooled and moderated by light water and with beryllium reflectors. It contains plate- type fuel elements (MTR type, 19.7% enriched uranium) with aluminum clad. The ETRR-2 reactor consist of 57 systems and around 200 subsystems. These systems contain many mechanical components such as tanks, pipes, valves, pumps, heat exchangers, cooling tower, air compressors, and supports. In this present work, a trial was made to adopt the general requirements of ASME code, section XI to ETRR-2 research reactor. ASME (American Society of Mechanical Engineers) boiler and pressure vessel Code, section XI, provides requirements for in-service inspection (ISI) and in-service testing (IST) of components and systems, and repair/replacement activities in a nuclear power plant. Also, IAEA (International Atomic Energy Authority) has published some recommendations for ISI for research reactors similar to that rules and requirements specified in ASME. The complete ISI program requires several steps that have to be performed in sequence. These steps are described in many logic flow charts (LFC's). These logic flow charts include; the general LFC's for all steps required to complete ISI program, the LFC's for examination requirements, the LFC's for flaw evaluation modules, and the LFC's for acceptability of welds for class 1 components. This program includes, also, the inspection program for welded parts of the reactor components during its lifetime. This inspection program is applied for each system and subsystem of ETRR-2 reactor. It includes the examination area type, the component type, the part to be examined, the weld type, the examination method, the inspection program schedule, and the detailed figures of the welded components. (authors)

SDZ ASM 981: an emerging safe and effective treatment for atopic dermatitis.

NARCIS (Netherlands)

Luger, T.; Leent, E.J. van; Graeber, M.; Hedgecock, S.; Thurston, M.; Kandra, A.; Berth-Jones, J.; Bjerke, J.; Christophers, E.; Knop, J.; Knulst, A.C.; Morren, M.; Morris, A.; Reitamo, S.; Roed-Petersen, J.; Schoepf, E.; Thestrup-Pedersen, K.; Valk, P.G.M. van der; Bos, J.D.

2001-01-01

BACKGROUND: SDZ ASM 981 is a selective inhibitor of the production of pro-inflammatory cytokines from T cells and mast cells in vitro. It is the first ascomycin macrolactam derivative under development for the treatment of inflammatory skin diseases. OBJECTIVES: This study was designed to determine

SDZ ASM 981: an emerging safe and effective treatment for atopic dermatitis

NARCIS (Netherlands)

Luger, T; Van Leent, EJM; Graeber, M; Hedgecock, S; Thurston, M; Kandra, A; Berth-Jones, J; Bjerke, J; Christophers, E; Knulst, AC; Morren, M; Morris, A; Reitamo, S; Roed-Petersen, J; Schoepf, E; Thestrup-Pedersen, K; van der Valk, P. G. M.; Bos, JD

Background SDZ ASM 981 is a selective inhibitor of the production of pro-inflammatory cytokines from T cells and mast cells in vitro. It is the first ascomycin macrolactam derivative under development for the treatment of inflammatory skin diseases. Objectives This study was: designed to determine

Design and test of ASME strainer for primary cooling system in HANARO

International Nuclear Information System (INIS)

Park, Yong-Chul; Ryu, Jeong-Soo

1999-01-01

The ASME strainers have been newly installed at the suction side of each reactor coolant pump to get rid of the foreign materials which may damage the pump impeller or interfere with the coolant path of fuel flow tube or primary plate type heat exchanger. The strainer was designed in accordance with ASME SEC. III, DIV. 1, ND and the structural integrity was verified by seismic analysis. The screen was designed in accordance with the effective void area from the result of flow analysis for T-type strainer. After installation of the strainer, it was confirmed through the field test that the flow characteristics of primary cooling system were not adversely affected. The pressure loss coefficient was calculated by Darcy equation using the pressure difference through each strainer and the flow rate measured during the strainer performance test. And these are useful data to predict flow variations by the pressure difference. (author)

Comparisons of ratchetting analysis methods using RCC-M, RCC-MR and ASME codes

International Nuclear Information System (INIS)

Yang Yu; Cabrillat, M.T.

2005-01-01

The present paper compares the simplified ratcheting analysis methods used in RCC-M, RCC-MR and ASME with some examples. Firstly, comparisons of the methods in RCC-M and efficiency diagram in RCC-MR are investigated. A special method is used to describe these two methods with curves in one coordinate, and the different conservation is demonstrated. RCC-M method is also be interpreted by SR (second ratio) and v (efficiency index) which is used in RCC-MR. Hence, we can easily compare the previous two methods by defining SR as abscissa and v as ordinate and plotting two curves of them. Secondly, comparisons of the efficiency curve in RCC-MR and methods in ASME-NH APPENDIX T are investigated, with significant creep. At last, two practical evaluations are performed to show the comparisons of aforementioned methods. (authors)

When a Plant Resistance Inducer Leaves the Lab for the Field: Integrating ASM into Routine Apple Protection Practices.

Science.gov (United States)

Marolleau, Brice; Gaucher, Matthieu; Heintz, Christelle; Degrave, Alexandre; Warneys, Romain; Orain, Gilles; Lemarquand, Arnaud; Brisset, Marie-Noëlle

2017-01-01

Plant resistance inducers, also called elicitors, could be useful to reduce the use of pesticides. However, their performance in controlling diseases in the field remains unsatisfactory due to lack of specific knowledge of how they can integrate crop protection practices. In this work, we focused on apple crop and acibenzolar- S -methyl (ASM), a well-known SAR (systemic acquired resistance) inducer of numerous plant species. We provide a protocol for orchard-effective control of apple scab due to the ascomycete fungus Venturia inaequalis , by applying ASM in combination with a light integrated pest management program. Besides we pave the way for future optimization levers by demonstrating in controlled conditions (i) the high influence of apple genotypes, (ii) the ability of ASM to prime defenses in newly formed leaves, (iii) the positive effect of repeated elicitor applications, (iv) the additive effect of a thinning fruit agent.

Corticosteroid-Induced MKP-1 Represses Pro-Inflammatory Cytokine Secretion by Enhancing Activity of Tristetraprolin (TTP) in ASM Cells.

Science.gov (United States)

Prabhala, Pavan; Bunge, Kristin; Ge, Qi; Ammit, Alaina J

2016-10-01

Exaggerated cytokine secretion drives pathogenesis of a number of chronic inflammatory diseases, including asthma. Anti-inflammatory pharmacotherapies, including corticosteroids, are front-line therapies and although they have proven clinical utility, the molecular mechanisms responsible for their actions are not fully understood. The corticosteroid-inducible gene, mitogen-activated protein kinase (MAPK) phosphatase 1 (MKP-1, DUSP1) has emerged as a key molecule responsible for the repressive effects of steroids. MKP-1 is known to deactivate p38 MAPK phosphorylation and can control the expression and activity of the mRNA destabilizing protein-tristetraprolin (TTP). But whether corticosteroid-induced MKP-1 acts via p38 MAPK-mediated modulation of TTP function in a pivotal airway cell type, airway smooth muscle (ASM), was unknown. While pretreatment of ASM cells with the corticosteroid dexamethasone (preventative protocol) is known to reduce ASM synthetic function in vitro, the impact of adding dexamethasone after stimulation (therapeutic protocol) had not been explored. Whether dexamethasone modulates TTP in a p38 MAPK-dependent manner in this cell type was also unknown. We address this herein and utilize an in vitro model of asthmatic inflammation where ASM cells were stimulated with the pro-asthmatic cytokine tumor necrosis factor (TNF) and the impact of adding dexamethasone 1 h after stimulation assessed. IL-6 mRNA expression and protein secretion was significantly repressed by dexamethasone acting in a temporally distinct manner to increase MKP-1, deactivate p38 MAPK, and modulate TTP phosphorylation status. In this way, dexamethasone-induced MKP-1 acts via p38 MAPK to switch on the mRNA destabilizing function of TTP to repress pro-inflammatory cytokine secretion from ASM cells. J. Cell. Physiol. 231: 2153-2158, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Applicability of Montreal Process Criterion 1 - conservation of biological diversity - to rangeland sustainability

Science.gov (United States)

Curtis H. Flather; Carolyn Hull Sieg

2000-01-01

Nine indicators of biodiversity conservation have been defined by the nations participating in the Montreal Process for assessing sustainability of temperate and boreal forests. Five of these indicators address compositional and spatial diversity of ecosystems; two address species diversity; and two are indirect measures of genetic diversity. Our objective was to...

SDZ ASM 981: an emerging safe and effective treatment for atopic dermatitis

NARCIS (Netherlands)

Luger, T.; van Leent, E. J.; Graeber, M.; Hedgecock, S.; Thurston, M.; Kandra, A.; Berth-Jones, J.; Bjerke, J.; Christophers, E.; Knop, J.; Knulst, A. C.; Morren, M.; Morris, A.; Reitamo, S.; Roed-Petersen, J.; Schoepf, E.; Thestrup-Pedersen, K.; van der Valk, P. G.; Bos, J. D.

2001-01-01

SDZ ASM 981 is a selective inhibitor of the production of pro-inflammatory cytokines from T cells and mast cells in vitro. It is the first ascomycin macrolactam derivative under development for the treatment of inflammatory skin diseases. This study was designed to determine the safety and efficacy

Career development through local chapter involvement: perspectives from chapter members.

Science.gov (United States)

Thomas, Melissa; Inniss-Richter, Zipporah; Mata, Holly; Cottrell, Randall R

2013-07-01

The importance of career development in professional organizations has been noted in the literature. Personal and professional benefits of membership regardless of discipline can be found across the career spectrum from student to executive. The benefits of professional membership with respect to career development in local chapter organizations have seldom been studied. Local chapter participation may offer significant career development opportunities for the practitioner, faculty member, and student. The purpose of this study was to explore the importance of local chapter involvement to the career development of health education practitioners. An 18-item questionnaire was disseminated to the membership of three local SOPHE (Society for Public Health Education) chapters that explored the level of local chapter involvement and the impact of how specific professional development activities impacted career development. The results of the survey highlighted the importance of continuing education programs, networking, and leadership experience in developing one's career that are offered by local SOPHE chapter involvement. Making a positive impact in the community and earning the respect of one's peers were most often reported as indicators of career success. These factors can directly impact local chapter participation. Career development can certainly be enhanced by active participation in the local chapter of a professional association.

Integrity evaluation for stud female threads on pressure vessel according to ASME code using FEM

International Nuclear Information System (INIS)

Kim, Moon Young; Chung, Nam Yong

2003-01-01

The extension of design life among power plants is increasingly becoming a world-wide trend. Kori no.1 unit in Korea is operating two cycle. It has two man-ways for tube inspection in a steam generator which is one of the important components in a nuclear power plant. Especially, stud bolts for man-way cover have damaged by disassembly and assembly several times and degradation for bolt materials for long term operation. It should be evaluated and compared by ASME code criteria for integrity evaluation. Integrity evaluation criteria which has been made by the manufacturer is not applied on the stud bolts of nuclear pressure vessels directly because it is controlled by the yield stress of ASME code. It can apply evaluation criteria through FEM analysis to damaged female threads and to evaluated safety for helical-coil method which is used according to code case-N-496-1. From analysis results, we found that it is the same results between stress intensity which got from FEM analysis on damaged female threads over 10% by manufacture integrity criteria and 2/3 yield strength criteria on ASME code. It was also confirmed that the helical-coil repair method would be safe

The Montreal Lectures: 2 August - 2 October, 1944

Energy Technology Data Exchange (ETDEWEB)

Arsenault, J.E

2007-06-15

The Second World War began in the summer of 1939 and spurred atomic science in the direction of weapons development. The United Kingdom (U.K.) was far ahead until about the summer of 1941 at which time the United States (U.S.) began to have serious interest in atomic weapons. Seen from Europe, the U.S. was a greater distance from the theatre of war and was deemed to be a safer place to conduct atomic research. In addition to good research centres it also had greater financial, manpower, and material resources. Early attempts at full collaboration between the U.K. and the U.S. met with little success and this led to the formation of a joint British-Canadian atomic weapons effort in 1942, with research laboratories located in Montreal, which were well up and running by spring 1943. The Montreal laboratory (ML) initially was administered by the National Research Council (NRC) and scientific direction was provided by the U.K. The ML was the foundation from which the Canadian nuclear industry evolved to the present time. Interest in atomic weapons development by the U.S. had been greatly accelerated by the Japanese attack on Pearl Harbour on 7 December 1941. By the beginning of 1943 it was spending 10 times as much as the U.K. on atomic weapons research. From then on, the U.S. set the Allied agenda for the development of atomic weapons, in varying degrees of collaboration with the U.K. and Canada. This spending which grew to about $2B by the middle of 1945, was directed by the U.S. Army Corps of Engineers under the Manhattan Project, officially established on 13 August 1942, and led by Gen. Leslie R. Groves From 17 September 1942. (author)

The Montreal Lectures: 2 August - 2 October, 1944

International Nuclear Information System (INIS)

Arsenault, J.E.

2007-01-01

The Second World War began in the summer of 1939 and spurred atomic science in the direction of weapons development. The United Kingdom (U.K.) was far ahead until about the summer of 1941 at which time the United States (U.S.) began to have serious interest in atomic weapons. Seen from Europe, the U.S. was a greater distance from the theatre of war and was deemed to be a safer place to conduct atomic research. In addition to good research centres it also had greater financial, manpower, and material resources. Early attempts at full collaboration between the U.K. and the U.S. met with little success and this led to the formation of a joint British-Canadian atomic weapons effort in 1942, with research laboratories located in Montreal, which were well up and running by spring 1943. The Montreal laboratory (ML) initially was administered by the National Research Council (NRC) and scientific direction was provided by the U.K. The ML was the foundation from which the Canadian nuclear industry evolved to the present time. Interest in atomic weapons development by the U.S. had been greatly accelerated by the Japanese attack on Pearl Harbour on 7 December 1941. By the beginning of 1943 it was spending 10 times as much as the U.K. on atomic weapons research. From then on, the U.S. set the Allied agenda for the development of atomic weapons, in varying degrees of collaboration with the U.K. and Canada. This spending which grew to about $2B by the middle of 1945, was directed by the U.S. Army Corps of Engineers under the Manhattan Project, officially established on 13 August 1942, and led by Gen. Leslie R. Groves From 17 September 1942. (author)

Parametric study of emerging high power accelerator applications using Accelerator Systems Model (ASM)

International Nuclear Information System (INIS)

Berwald, D.H.; Mendelsohn, S.S.; Myers, T.J.; Paulson, C.C.; Peacock, M.A.; Piaszczyk, CM.; Rathke, J.W.; Piechowiak, E.M.

1996-01-01

Emerging applications for high power rf linacs include fusion materials testing, generation of intense spallation neutrons for neutron physics and materials studies, production of nuclear materials and destruction of nuclear waste. Each requires the selection of an optimal configuration and operating parameters for its accelerator, rf power system and other supporting subsystems. Because of the high cost associated with these facilities, economic considerations become paramount, dictating a full evaluation of the electrical and rf performance, system reliability/availability, and capital, operating, and life cycle costs. The Accelerator Systems Model (ASM), expanded and modified by Northrop Grumman during 1993-96, provides a unique capability for detailed layout and evaluation of a wide variety of normal and superconducting accelerator and rf power configurations. This paper will discuss the current capabilities of ASM, including the available models and data base, and types of trade studies that can be performed for the above applications. (author)

Literacy promotion at the Montreal Children’s Hospital

Science.gov (United States)

Erdos, Caroline; Ferdinand, Jae-Marie

2017-01-01

Abstract The foundations for language and literacy are set in utero when babies hear the tone of their mother’s voice (1). There is strong evidence of a positive relationship between early literacy experiences and language and academic outcomes (2). Unfortunately, many parents do not know about the benefits of reading to and with young children, and many children enter school without the basic skills needed to learn to read and succeed. Physicians who have contact with young families are in a distinctive position to promote reading, though despite its evidence base, it has not yet become a universal intervention. A short description of the projects at the Montreal Children’s Hospital is provided. PMID:29479189

The impact of the petrochemical industry in the economic development framework of the Montreal region

International Nuclear Information System (INIS)

Danis, M.

1992-01-01

A brief overview of the petrochemical industry in Canada was presented. The industry, which employs approximately 100,000 Canadians, has an annual production estimated to be in excess of 20 billion dollars. Similarly, in the province of Quebec, the petrochemical industry makes a very significant contribution to the economy of the province, especially to that of the Montreal region. Recent initiatives and investments by the Canadian Government in the petrochemical sector were summarized. Among these, subsidies to Petromont to improve and modernize its plant facilities in Varennes, to Himont Canada, also of Varennes, to develop a new manufacturing process, to Gaz Metropolitain to establish a centre of gas technology, were highlighted. These and other government measures and initiatives provide a solid foundation for the petrochemical industry to continue to play a pre-eminent role in the economy of the Montreal region

Scope and implementation of standards ASME N510 / N511 in air treatment system (HVAC) of the Asco nuclear power plant; Alcance e implementacion de las normas ASME N511 en el sistema de tratamiento de aire (HVAC) de la central nuclear de Asco

Energy Technology Data Exchange (ETDEWEB)

Jaimot Jimenez, J. J.

2013-07-01

With the ITC for renewal of license units 1 and 2 of Asco, the CSN It required the commissioning tests underway in the air, according to ASME N510 filter units. It is required that, for safety-related units, to undertake preventive inspections according to ASME N511. All these requirements, in tight deadlines, have represented a great challenge for the organizations of maintenance and engineering of ANAV.

The Tanenbaum Open Science Institute: Leading a Paradigm Shift at the Montreal Neurological Institute.

Science.gov (United States)

Poupon, Viviane; Seyller, Annabel; Rouleau, Guy A

2017-08-30

The Montreal Neurological Institute is adopting an Open Science Policy that will be enacted by the Tanenbaum Open Science Institute. The aim is to accelerate the generation of knowledge and novel effective treatments for brain disorders by freeing science. Copyright © 2017 Elsevier Inc. All rights reserved.

Technical report on comparative analysis of ASME QA requirements and ISO series

International Nuclear Information System (INIS)

Kim, Kwan Hyun

2000-06-01

This technical report provides the differences on the QA requirement ASME and ISO in nuclear fields. This report applies to the quality assurance(QA) programmes of the design of two requirement. The organization having overall responsibility for the nuclear design, preservation, fabrication shall be described in this report in each stage of design project

Impact of ACI-ASME code on design and construction of nuclear containment structures

International Nuclear Information System (INIS)

Reedy, R.F.

1978-01-01

The effect of the ACI-ASME code for design and construction of concrete containment structures on the nuclear and concrete industries is examined. Topics covered include purpose of the code, general requirements, responsibilities and duties, design and construction specifications, quality assurance, inspection, the liner, and stamping

Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G.

2008-11-01

This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X

Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

Energy Technology Data Exchange (ETDEWEB)

Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G

2008-11-15

This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X.

Precipitation-hardening stainless steel bars, shapes, and forgings (ASME SA-564 with additional requirements)

International Nuclear Information System (INIS)

1975-05-01

A standard prescribing requirements for precipitation-hardening stainless steel bars, shapes, and forgings (ASME SA-564 with additional requirements) for nuclear and associated applications is presented. This standard supersedes RDT M 7-6T, dated January 1974. (U.S.)

Inelasticity and the ASME code

International Nuclear Information System (INIS)

Berman, I.

1978-01-01

Although it may have more general applicability, this paper is specifically concerned with some aspects of plasticity for class I nuclear components that are contained in section III of the ASME Boiler and Pressure Vessel Code. It directly addresses design for components at temperatures at which creep is not a factor. A review is made of the relationship of plasticity to each of the three failure modes that the stress limits are intended to prevent. It is found that the prevention of bursting and gross distortion from a single application of pressure and the prevention of fatigue failure caused by repeated cycles of peak stresses are well supported by experimental results. The experimental verification for the rules to show that the primary plus secondary stresses shakedown to elastic behavior is not clear. Various directed efforts which could lead to greater assurance of shakedown to elastic behavior are suggested. The major approach should be a massive program to develop a test matrix of experimental information for various portions of each component of interest in the Code. (Auth.)

Computer mapping as an aid in air-pollution studies: Montreal region study

Energy Technology Data Exchange (ETDEWEB)

Granger, J M

1972-01-01

Through the use of computer-mapping programs, an operational technique has been designed which allows an almost-instant appraisal of the intensity of atmospheric pollution in an urban region on the basis of epiphytic sensitivity. The epiphytes considered are essentially lichens and mosses growing on trees. This study was applied to the Montreal region, with 349 samplings statiions distributed nearly uniformly. Computer graphics of the findings are included in the appendix.

Acquisition and Processing of High Resolution Hyperspectral Imageries for the 3d Mapping of Urban Heat Islands and Microparticles of Montreal

Science.gov (United States)

Mongeau, R.; Baudouin, Y.; Cavayas, F.

2017-10-01

Ville de Montreal wanted to develop a system to identify heat islands and microparticles at the urban scale and to study their formation. UQAM and UdeM universities have joined their expertise under the framework "Observatoire Spatial Urbain" to create a representative geospatial database of thermal and atmospheric parameters collected during the summer months. They innovated in the development of a methodology for processing high resolution hyperspectral images (1-2 m). In partnership with Ville de Montreal, they integrated 3D geospatial data (topography, transportation and meteorology) in the process. The 3D mapping of intraurban heat islands as well as air micro-particles makes it possible, initially, to identify the problematic situations for future civil protection interventions during extreme heat. Moreover, it will be used as a reference for the Ville de Montreal to establish a strategy for public domain tree planting and in the analysis of urban development projects.

Comparison of ASME Code NB-3200 and NB-3600 results for fatigue analysis of B31.1 branch nozzles

International Nuclear Information System (INIS)

Nitzel, M.E.; Ware, A.G.; Morton, D.K.

1996-01-01

Fatigue analyses wre conducted on two reactor coolant system branch nozzles in an operating PWR designed to the B31.1 Code, for which no explicit fatigue analysis was required by the licensing basis. These analyses were performed as part of resolving issues connected with NRC's Fatigue Action Plan to determine if the cumulative usage factor (CUF) for these nozzles, using the 1992 ASME Code and representative PWR transients, were comparable to nozzles designed and analyzed to the ASME Code. Both NB-3200 and NB-3600 ASME Code methods were used. NB-3200 analyses included the development of finite element models for each nozzle. Although detailed thermal transients were not available for the plant analyzed, representative transients from similar PWRs were applied in each method. CUFs calculated using NB-3200 methods were significantly less than using NB-3600. The paper points out differences in analysis methods and highlights difficulties and unknowns in performing more detailed analyses to reduce conservative assumptions

Development and application of proposed ASME Section XI Code changes for risk-based inspection of piping

International Nuclear Information System (INIS)

West, R.A.

1996-01-01

This synopsis has been written to describe a perspective on the development and application of ASME Section XI Code changes for risk-based inspection of piping. The content is specifically related to the use of risk-based technology for Inservice Inspection (ISI) of piping and efforts made to support the ASME Research/Westinghouse Owners Group/Millstone Unit 3 approach for use of this technology. The opinions contained herein may or may not reflect those of the ASME Codes and Standards Committees responsible for these activities. In order to take such a detailed technical subject and put it into an understandable format, the author has chosen to provide an analogy to simplify what is actually taking place. Risk-based technology in the ISI of piping can be likened to the process of making and using specifically ground prescription glasses to allow for better vision. It provides a process to develop and use these uniquely ground glasses that will dynamically focus on all the locations and obstacles within a plant's piping systems that could cause that plant to trip and fall; more importantly it identifies the locations where the fall could possibly hurt someone else. In this way, Nuclear Safety is being addressed

Argel, Buenos Aires, Montreal: el Comité de Cine del Tercer Mundo (1973 / 1974 / Algiers, Buenos Aires, Montreal: the Third World Cinema Committee (1973 / 1974

Directory of Open Access Journals (Sweden)

Mariano Mestman

2017-02-01

Full Text Available El encuentro de cineastas de Argel (Argelia en diciembre de 1973 es bien conocido en los estudios sobre el cine del Tercer Mundo. En cuanto oportunidad de intercambio y discusión, este encuentro permitió la organización del trabajo de los cineastas y focalizó el debate en tres ejes principales: la contribución del cine a los procesos de liberación nacional, la descolonización de las pantallas del Tercer Mundo y la lucha contra la «alienación cultural». El resultado más importante fue la creación del Comité de Cine del Tercer Mundo. Solo seis meses más tarde, un nuevo encuentro tuvo lugar en Buenos Aires (Argentina. Por un lado, el presente ensayo muestra cómo un proyecto político-cinematográfico (el «tercermundismo» fue tomando forma gradualmente durante esos años y destaca el rol de ambas reuniones en la promoción de esta nueva identidad político-cultural. Por otro, este trabajo también propone la necesidad de incorporar a esta historia otro evento decisivo: los Rencontres Internationales pour un Nouveau Cinema, realizados en Montreal en 1974. Poco considerado incluso por la bibliografía especializada, este encuentro puede considerarse el más importante del cine polí- tico mundial de los años sesenta y setenta. Dada la cantidad y diversidad de los participantes de Europa, Estados Unidos, África y América Latina, la conferencia de Montreal fue crucial en la constitución del diálogo entre los cineastas políticos del Primer Mundo y la tendencia tercermundista construida entre Argel y Buenos Aires.Palabras clave: Tercer Mundo, tercermundismo, Tercer Cine, Nuevo Cine Latinoamericano, Federación Panafricana de CineastasAbstract:The filmmakers meeting held in Algiers (Algeria in December 1973 is a wellknown event among Third World Cinema´s studies. As an opportunity to exchange and discussion, this gathering organised the work of Third World filmmakers and focused the debate on three main issues: the contribution of

Elastic-plastic stress analysis and ASME code evaluation of a bottomhead penetration in a reactor pressure vessel

International Nuclear Information System (INIS)

Ranganath, S.

1979-01-01

Nuclear pressure vessel components are designed to meet the requirements of Section III of the ASME Boiler and Pressure Vessel Code. Specifically, the design must satisfy the limits on stress range and fatigue usage prescribed in NB-3200, Section III ASME Code for the various design and operating conditions for the component. The Code requirements assure that the component does not experience gross yielding and that in general, elastic shakedown occurs following cyclic loading. When elastic stress analysis is performed this can be shown by meeting the limits in the Code on Primary and Primary plus Secondary (P+Q) stress intensities. However, when the P+Q limits cannot be met and elastic Shakedown cannot be demonstrated, plastic analysis may be performed to meet the requirements of the Code. This paper describes the elastic-plastic stress analysis of a Boiling Water Reactor Vessel bottom head in-core penetration and illustrates how plastic analysis can be used in ASME Code evaluations to show Code compliance. Details of the thermal analysis, elastic-plastic stress analysis and fatigue evaluation are presented and it is shown that the in-core penetration satisfies the code requirements. 6 refs

Relocating Precarity and Resiliency within Montreal: The Artists' Bloc of the Immigrant Workers' Centre

Science.gov (United States)

Hall, Koby Rogers; Salamanca, Manuel

2017-01-01

In this document we describe our experience relocating precarity and resiliency by way of arts activism, to denounce and make visible social injustices experienced by im/migrant communities in Montreal. Under the umbrella of the Immigrant Workers' Centre, and other allies from the im/migrant workers' movement, we combine knowledge building, action…

ASTM and ASME-BPE Standards--Complying with the Needs of the Pharmaceutical Industry.

Science.gov (United States)

Huitt, William M

2011-01-01

Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. Through harmonization efforts this relatively new standard has brought together, scrutinized, and refined industry accepted methodologies together with FDA compliance requirements, and has established an American National Standard that provides a comprehensive set of standards that are integral to the pharmaceutical industry. This article describes various American National Standards, including those developed and published by the American Society for Testing and Materials (ASTM), and how they apply to the pharmaceutical industry. It goes on to discuss the harmonization effort that takes place between the various standards developers in an attempt to prevent conflicts and omissions between the many standards. Also included are examples of tables and figures taken from the ASME-BPE Standard. These examples provide the reader with insight to the relevant content of the ASME-BPE Standard. Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and

Elastic creep-fatigue evaluation for ASME code

International Nuclear Information System (INIS)

Severud, L.K.; Winkel, B.V.

1987-01-01

Experience with applying the ASME Code Case N-47 rules for evaluation of creep-fatigue with elastic analysis results has been problematic. The new elastic evaluation methods are intended to bound the stress level and strain range values needed for use in employing the code inelastic analysis creep-fatigue damage counting procedures. To account for elastic followup effects, ad hoc rules for stress classification, shakedown, and ratcheting are employed. Because elastic followup, inelastic strain concentration, and stress-time effects are accounted for, the design fatigue curves in Case N-47 for inelastic analysis are used instead of the more conservative elastic analysis curves. Creep damage assessments are made using an envelope stress-time history that treats multiple load events and repeated cycles during elevated temperature service life. (orig./GL)

Prediction of surface cracks from thick-walled pressurized vessels with ASME code

International Nuclear Information System (INIS)

Thieme, W.

1983-01-01

The ASME-Code, Section XI, Appendix A 'Analysis of flow indications' is still non-mandatory for the pressure components of nuclear power plants. It is certainly difficult to take realistic account of the many factors influencing crack propagation while making life predictions. The accuracy of the US guideline is analysed, and its possible applications are roughly outlined. (orig./IHOE) [de

The statistical background to proposed ASME/MPC fracture toughness reference curves

International Nuclear Information System (INIS)

Oldfield, W.

1981-01-01

The ASME Pressure Vessel Codes define, in Sec. 11, lower bound fracture toughness curves. These curves are used to predict the lower bound fracture toughness on the basis of the RT test procedure. This test is used to remove heat to heat differences, by permitting the lower bound (reference) curve to be moved along the temperature scale according to the measured RT. Numerous objections have been raised to the procedure, and a Subcommittee (the ASME/MPC Working Group on Reference Toughness) is currently revising the codified procedures for fracture toughness prediction. The task has required a substantial amount of statistical work, since the new procedure are to have a statistical basis. Using initiation fracture toughness (J-Integral R curve procedures in the ductile domain) it was shown that when CVN energy data is properly transformed it is highly correlated with valid fracture toughness measurements. A single functional relationship can be used to predict the mean fracture toughness for a sample of steel from a set of CVN energy measurements, and the coefficients of the function tabulated. More importantly, the approximate lower statistical bounds to the initiation fracture toughness behaviour can be similarly predicted, and coefficients for selected bounds have also been tabulated. (orig.)

Development of ASME Code Section 11 visual examination requirements

International Nuclear Information System (INIS)

Cook, J.F.

1990-01-01

Section XI of the American Society for Mechanical Engineers Boiler and Pressure Vessel Code (ASME Code) defines three types of nondestructive examinations, visual, surface, and volumetric. Visual examination is important since it is the primary examination method for many safety-related components and systems and is also used as a backup examination for the components and systems which receive surface or volumetric examinations. Recent activity in the Section XI Code organization to improve the rules for visual examinations is reviewed and the technical basis for the new rules, which cover illumination, vision acuity, and performance demonstration, is explained

The ASM-NSF Biology Scholars Program: An Evidence-Based Model for Faculty Development

Directory of Open Access Journals (Sweden)

Amy L. Chang

2016-05-01

Full Text Available The American Society for Microbiology (ASM established its ASM-NSF (National Science Foundation Biology Scholars Program (BSP to promote undergraduate education reform by 1 supporting biologists to implement evidence-based teaching practices, 2 engaging life science professional societies to facilitate biologists’ leadership in scholarly teaching within the discipline, and 3 participating in a teaching community that fosters disciplinary-level science, technology, engineering, and mathematics (STEM reform. Since 2005, the program has utilized year-long residency training to provide a continuum of learning and practice centered on principles from the scholarship of teaching and learning (SoTL to more than 270 participants (“scholars” from biology and multiple other disciplines. Additionally, the program has recruited 11 life science professional societies to support faculty development in SoTL and discipline-based education research (DBER. To identify the BSP’s long-term outcomes and impacts, ASM engaged an external evaluator to conduct a study of the program’s 2010­–2014 scholars (n = 127 and society partners. The study methods included online surveys, focus groups, participant observation, and analysis of various documents. Study participants indicate that the program achieved its proposed goals relative to scholarship, professional society impact, leadership, community, and faculty professional development. Although participants also identified barriers that hindered elements of their BSP participation, findings suggest that the program was essential to their development as faculty and provides evidence of the BSP as a model for other societies seeking to advance undergraduate science education reform. The BSP is the longest-standing faculty development program sponsored by a collective group of life science societies. This collaboration promotes success across a fragmented system of more than 80 societies representing the life

The ASM-NSF Biology Scholars Program: An Evidence-Based Model for Faculty Development.

Science.gov (United States)

Chang, Amy L; Pribbenow, Christine M

2016-05-01

The American Society for Microbiology (ASM) established its ASM-NSF (National Science Foundation) Biology Scholars Program (BSP) to promote undergraduate education reform by 1) supporting biologists to implement evidence-based teaching practices, 2) engaging life science professional societies to facilitate biologists' leadership in scholarly teaching within the discipline, and 3) participating in a teaching community that fosters disciplinary-level science, technology, engineering, and mathematics (STEM) reform. Since 2005, the program has utilized year-long residency training to provide a continuum of learning and practice centered on principles from the scholarship of teaching and learning (SoTL) to more than 270 participants ("scholars") from biology and multiple other disciplines. Additionally, the program has recruited 11 life science professional societies to support faculty development in SoTL and discipline-based education research (DBER). To identify the BSP's long-term outcomes and impacts, ASM engaged an external evaluator to conduct a study of the program's 2010-2014 scholars (n = 127) and society partners. The study methods included online surveys, focus groups, participant observation, and analysis of various documents. Study participants indicate that the program achieved its proposed goals relative to scholarship, professional society impact, leadership, community, and faculty professional development. Although participants also identified barriers that hindered elements of their BSP participation, findings suggest that the program was essential to their development as faculty and provides evidence of the BSP as a model for other societies seeking to advance undergraduate science education reform. The BSP is the longest-standing faculty development program sponsored by a collective group of life science societies. This collaboration promotes success across a fragmented system of more than 80 societies representing the life sciences and helps

Adaptation illustrations: Chapter 4

Science.gov (United States)

Maria Janowiak; Patricia Butler; Chris Swanston; Matt St. Pierre; Linda. Parker

2012-01-01

In this chapter, we demonstrate how the Adaptation Workbook (Chapter 3) can be used with the Adaptation Strategies and Approaches (Chapter 2) to develop adaptation tactics for two real-world management issues. The two illustrations in this chapter are intended to provide helpful tips to managers completing the Adaptation Workbook, as well as to show how the anticipated...

Comparative studies on the effects of a yucca extract and acibenzolar-S-methyl (ASM) on inhibition of Venturia inaequalis in apple leaves

DEFF Research Database (Denmark)

Bengtsson, Marianne Vibeke; Wulff, Ednar Gadelha; Jørgensen, Hans Jørgen Lyngs

2009-01-01

The effect of an extract of Yucca schidigera on the control and infection process of the apple scab pathogen, Venturia inaequalis, was examined and compared with the chemical resistance inducer, acibenzolar-S-methyl (ASM). In seedling assays, both materials significantly reduced apple scab symptoms...... and pathogen sporulation on leaves and both showed similar control efficacies as the reference treatment, sulphur. Whereas yucca extract and sulphur gave significant inhibition of conidial germination in vitro, ASM did not inhibit germination. Histopathological studies of the infection process of V. inaequalis...... in apple leaves showed that the yucca extract primarily acted by inhibiting pre-penetration events and penetration itself. In contrast, the ASM treatment significantly inhibited more stages of the infection process (pre-penetration, penetration and post-penetration events). These observations suggest...

Alteraciones espirométricas en pacientes asmáticos del municipio Majibacoa, 2009-2013

Directory of Open Access Journals (Sweden)

Mailin Molina Leyva

2014-08-01

Full Text Available Se realizó un estudio descriptivo, con el objetivo de identificar alteraciones espirométricas en pacientes asmáticos del municipio Majibacoa, en el período comprendido desde enero del 2009 a enero del 2013. La muestra se integró por cincuenta pacientes asmáticos con más de 20 años de evolución de la enfermedad. Se les realizó previo consentimiento informado y una prueba espirométrica. Predominó el sexo femenino y las edades comprendidas entre 35 y 54 años. Prevalecieron los pacientes en la categoría de asma persistente severa. El volumen espiratorio forzado del primer segundo se comportó patológico en el mayor por ciento de los pacientes y la capacidad vital forzada mostró alteración en un menor número de pacientes. El patrón espirométrico obstructivo fue el más frecuente en los pacientes estudiados

Nerves and Nostalgia: Expression of Loss Among Greek Immigrants in Montreal

Science.gov (United States)

Lock, Margaret; Wakewich-Dunk, Pamela

1990-01-01

The authors interviewed first-generation Greek immigrant women in Montreal about nonspecific somatic symptoms. The concept of nevra (nerves), which was central to these discussions, was used to link environmental and psychosocial variables with distress and painful physical states. The authors discuss the cultural construction of female identity in Greece and analyze the negative effect of immigration on self-esteem, often manifested as attacks of nevra. Metaphorical concepts, such as nevra, can be used to improve physician understanding and to facilitate communication with, and enhance care of, immigrant patients. PMID:21234036

Long periodicity of Blazar with RXTE ASM, TA and HEGRA

OpenAIRE

Osone, S.; Teshima, M.

2002-01-01

Long periodicity for Mkn501 during a large flare in 1997 have been reported by TA, HEGRA group. Here, we establish this periodicity with archival data of RXTE All Sky Monitor(ASM), Telescope Array(TA) and HEGRA with a chance probability less than $10^{-5}$. We also find that an origin of 23 day periodicity is related with a change of either a gamma factor of electrons $\\gamma$ or the magnetic field or a beaming factor. And, in order to search for a category which have a long periodicity, we m...

[Factors associated with dental consultation in children in Talca (Chile) and in Chilean immigrants in Montreal (Canada)].

Science.gov (United States)

Núñez, Loreto; Icaza, Gloria; Contreras, Violeta; Correa, Gloria; Canales, Tatiana; Mejía, Gloria; Oxman-Martínez, Jacqueline; Moreau, Jacques

2013-01-01

To identify the factors that influence the use of dental services in 4-7-year-olds and in 10-13-year-olds resident in the cities of Talca (Chile) and Montreal (Canada). A nonprobabilistic cross-sectional study was carried out in 147 boys and girls in Talca and in 94 boys and girls in Montreal between 2009 and 2011. Sociodemographic variables were recorded in parents and children, including age and sex. Data were also gathered on parental education, family composition, and proximity to health centers within neighborhoods. The data were analyzed with Fisher's exact test and the robust Cox regression model (with constant time) with a significance level of 0,05. In Talca, parental education was significantly associated with dental care visits at least twice a year. The children of parents with university education were 2.20 times more likely to consult a dentist (95% CI: 1.30-3.73). Children whose parents perceived their children's health positively were 53% (OR = 0,47; 95% CI: 0,28-0,77) less likely to consult a dentist. In Montreal, the children of parents with university education were 2.10 times more likely to consult a dentist (95%CI: 1.17-3.76), while older children (10-13 years) were 2.11 (95% CI: 1.15-3.88) times more likely to consult a dentist. In both cities, parental education level was associated with the use of dental services. Copyright © 2012 SESPAS. Published by Elsevier Espana. All rights reserved.

Comparison of Fatigue crack growth rate of Type 347 stainless steel with ASME and JSME models

Energy Technology Data Exchange (ETDEWEB)

Hong, Seokmin; Min, Ki-Deuk; Jeon, Soon-Hyeok; Lee, Bong-Sang [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this study, the FCGR of 347SS was evaluated in modified PWR high temperature water conditions. The FCGRs of 347SS under modified pressurized-water conditions were measured by using compact-tension (CT) specimens at different levels of dissolved oxygen (DO), and it were compared with other models proposed by ASME and Japanese groups. Corrosion fatigue is main factor of environmental fatigue effect. Increase of DO level in water induced more corrosion damage, and it accelerated FCGR in PWR and FCGR of 347SS in PWR water condition was faster than reference curves in J-PWR and ASME draft code case derived by 304 and 316 stainless steel, but it was slower than J-BWR reference curve. Using J-BWR model for estimating the FCGR of 347SS under PWR might be conservative.

Strengthening the Montreal Protocol: Does it cool down the greenhouse?

International Nuclear Information System (INIS)

Den Elzen, M.G.J.; Swart, R.J.; Rotmans, J.

1992-01-01

Strengthening of the Montreal Protocol is recently being negotiated in London in 1990 in order to achieve further reductions of the regulated CFCs and to include possibly more substances. The implications of different policies with respect to control of ozone depleting substances for climate change are analysed, including the proposed substitution by HCFCs and HFCs, carbon tetrachloride and methylchloroform. A special halocarbon module was developed within the framework of RIVM's Integrated Model to Assess the Greenhouse Effect (IMAGE). IMAGE is a parametrized science based policy model and has been developed to give policy agencies a concise overview of the quantitative aspects of the greenhouse problem, to evaluate various policy options concerning climate change and to serve as a means of communication. It is concluded, from simulations with the halocarbon module, that it is of primary importance to achieve a further reduction of the regulated CFCs compared to the Montreal Protocol with compliance by as many countries as possible. From the perspective of the greenhouse effect the inclusion of longer lived halocarbons, such as carbon tetrachloride and HCFC-22 in the protocol come second. The application of methylchloroform, halons and HCFCs and HFCs with lower global warming potentials (GWPs) than HCFC-22 contributes only marginally to the greenhouse effect in comparison with the much more important greenhouse gases carbon dioxide, methane, ozone and nitrous oxide. Especially if further growth of the total production of HCFCs after complete replacement of the present CFCs can be avoided by using these alternatives with a lower GWP, these substances could therefore be tolerated in a transition period, from the perspective of global warming. 13 figs., 3 tabs., 29 refs

Doxofylline does not increase formoterol-induced cAMP nor MKP-1 expression in ASM cells resulting in lack of anti-inflammatory effect.

Science.gov (United States)

Patel, Brijeshkumar S; Kugel, Michael J; Baehring, Gina; Ammit, Alaina J

2017-08-01

The xanthine doxofylline has been examined in clinical trials and shown to have efficacy and greater tolerability than theophylline in asthma and chronic obstructive pulmonary disease. The 'novofylline' doxofylline has demonstrated bronchodilatory and anti-inflammatory actions in in vivo and ex vivo experimental models of respiratory disease. However, there are limited studies in vitro. We address this herein and examine whether doxofylline has anti-inflammatory impact on primary cultures of airway smooth muscle (ASM) cells. We conduct a series of investigations comparing and contrasting doxofylline with the archetypal xanthine, theophylline, and the specific phosphodiesterase (PDE) 4 inhibitor, cilomilast. We confirm that the xanthine drugs do not have action as PDE inhibitors in ASM cells. Unlike cilomilast, doxofylline (and theophylline) do not increase cAMP production in ASM cells induced by long-acting β 2 -agonist formoterol. Similar to theophylline, and consistent with the lack of cAMP potentiation, doxofylline does not augment formoterol-induced upregulation of the anti-inflammatory protein mitogen-activated protein kinase phosphatase 1 (MKP-1). However, when we examine the effect of doxofylline on secretion of the interleukin 8 from ASM cells stimulated by tumour necrosis factor (an in vitro surrogate measure of inflammation), there was no repression of inflammation. This is in contrast to the anti-inflammatory impact exerted by theophylline and cilomilast in confirmatory experiments. In summary, our study is the first to examine the effect of doxofylline on ASM cells in vitro and highlights some distinct differences between two key members of xanthine drug family, doxofylline and theophylline. Copyright © 2017 Elsevier Ltd. All rights reserved.

Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR & GEN IV

Energy Technology Data Exchange (ETDEWEB)

William J. O’Donnell; Donald S. Griffin

2007-05-07

The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

Elastic creep-fatigue evaluation for ASME [American Society of Mechanical Engineers] code

International Nuclear Information System (INIS)

Severud, L.K.; Winkel, B.V.

1987-02-01

Reassessment of past ASME N-47 creep-fatigue rules have been under way by committee members. The new proposed elastic creep-fatigue methods are easier to apply than those previously in the code case. They also provide a wider range of practical application while still providing conservative assessments. It is expected that new N-47 code rules for elastic creep-fatigue evaluation will be adopted in the near future

Comparative study of design of piping supports class 1, 2 and 3 considering german code KTA and ASME III - NF

International Nuclear Information System (INIS)

Faloppa, Altair A.; Fainer, Gerson; Mattar Neto, Miguel; Elias, Marcos V.

2013-01-01

The objective of this paper is developing a comparative study of the design criteria for class 1, 2, 3 piping supports considering the American Code ASME Section III - NF and the German Code KTA 3205.1 to the Primary Circuit, KTA 3205.2 to the others systems and KTA 3205.3 series-production standards supports of a PWR nuclear power plant. An additional purpose of the paper is a general analysis of the main design concepts of the American Code ASME Boiler and Pressure Vessel Code, Section III, Division 1 and German Nuclear Design Code KTA that was performed in order to aid the comparative study proposed. The relevance of this study is to show the differences between codes ASME and KTA since they were applied in the design of the Nuclear Power Plants Angra 1 and Angra 2, and to the design of Angra 3, which is at the moment under construction. It is also considered their use in the design of nuclear installations such as RMB - Reator MultiProposito Brasileiro and LABGENE - Laboratorio de Geracao Nucleoeletrica. (author)

Statistical re-evaluation of the ASME K{sub IC} and K{sub IR} fracture toughness reference curves

Energy Technology Data Exchange (ETDEWEB)

Wallin, K.; Rintamaa, R. [Valtion Teknillinen Tutkimuskeskus, Espoo (Finland)

1998-11-01

Historically the ASME reference curves have been treated as representing absolute deterministic lower bound curves of fracture toughness. In reality, this is not the case. They represent only deterministic lower bound curves to a specific set of data, which represent a certain probability range. A recently developed statistical lower bound estimation method called the `Master curve`, has been proposed as a candidate for a new lower bound reference curve concept. From a regulatory point of view, the Master curve is somewhat problematic in that it does not claim to be an absolute deterministic lower bound, but corresponds to a specific theoretical failure probability that can be chosen freely based on application. In order to be able to substitute the old ASME reference curves with lower bound curves based on the master curve concept, the inherent statistical nature (and confidence level) of the ASME reference curves must be revealed. In order to estimate the true inherent level of safety, represented by the reference curves, the original data base was re-evaluated with statistical methods and compared to an analysis based on the master curve concept. The analysis reveals that the 5% lower bound Master curve has the same inherent degree of safety as originally intended for the K{sub IC}-reference curve. Similarly, the 1% lower bound Master curve corresponds to the K{sub IR}-reference curve. (orig.)

TRAIL death receptor 4 signaling via lysosome fusion and membrane raft clustering in coronary arterial endothelial cells: evidence from ASM knockout mice.

Science.gov (United States)

Li, Xiang; Han, Wei-Qing; Boini, Krishna M; Xia, Min; Zhang, Yang; Li, Pin-Lan

2013-01-01

Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) and its receptor, death receptor 4 (DR4), have been implicated in the development of endothelial dysfunction and atherosclerosis. However, the signaling mechanism mediating DR4 activation leading to endothelial injury remains unclear. We recently demonstrated that ceramide production via hydrolysis of membrane sphingomyelin by acid sphingomyelinase (ASM) results in membrane raft (MR) clustering and the formation of important redox signaling platforms, which play a crucial role in amplifying redox signaling in endothelial cells leading to endothelial dysfunction. The present study aims to investigate whether TRAIL triggers MR clustering via lysosome fusion and ASM activation, thereby conducting transmembrane redox signaling and changing endothelial function. Using confocal microscopy, we found that TRAIL induced MR clustering and co-localized with DR4 in coronary arterial endothelial cells (CAECs) isolated from wild-type (Smpd1 (+/+)) mice. Furthermore, TRAIL triggered ASM translocation, ceramide production, and NADPH oxidase aggregation in MR clusters in Smpd1 ( +/+ ) CAECs, whereas these observations were not found in Smpd1 (-/-) CAECs. Moreover, ASM deficiency reduced TRAIL-induced O(2) (-[Symbol: see text]) production in CAECs and abolished TRAIL-induced impairment on endothelium-dependent vasodilation in small resistance arteries. By measuring fluorescence resonance energy transfer, we found that Lamp-1 (lysosome membrane marker protein) and ganglioside G(M1) (MR marker) were trafficking together in Smpd1 (+/+) CAECs, which was absent in Smpd1 (-/-) CAECs. Consistently, fluorescence imaging of living cells with specific lysosome probes demonstrated that TRAIL-induced lysosome fusion with membrane was also absent in Smpd1 (-/-) CAECs. Taken together, these results suggest that ASM is essential for TRAIL-induced lysosomal trafficking, membrane fusion and formation of MR redox signaling platforms

Towards a consensus-based biokinetic model for green microalgae - The ASM-A.

Science.gov (United States)

Wágner, Dorottya S; Valverde-Pérez, Borja; Sæbø, Mariann; Bregua de la Sotilla, Marta; Van Wagenen, Jonathan; Smets, Barth F; Plósz, Benedek Gy

2016-10-15

Cultivation of microalgae in open ponds and closed photobioreactors (PBRs) using wastewater resources offers an opportunity for biochemical nutrient recovery. Effective reactor system design and process control of PBRs requires process models. Several models with different complexities have been developed to predict microalgal growth. However, none of these models can effectively describe all the relevant processes when microalgal growth is coupled with nutrient removal and recovery from wastewaters. Here, we present a mathematical model developed to simulate green microalgal growth (ASM-A) using the systematic approach of the activated sludge modelling (ASM) framework. The process model - identified based on a literature review and using new experimental data - accounts for factors influencing photoautotrophic and heterotrophic microalgal growth, nutrient uptake and storage (i.e. Droop model) and decay of microalgae. Model parameters were estimated using laboratory-scale batch and sequenced batch experiments using the novel Latin Hypercube Sampling based Simplex (LHSS) method. The model was evaluated using independent data obtained in a 24-L PBR operated in sequenced batch mode. Identifiability of the model was assessed. The model can effectively describe microalgal biomass growth, ammonia and phosphate concentrations as well as the phosphorus storage using a set of average parameter values estimated with the experimental data. A statistical analysis of simulation and measured data suggests that culture history and substrate availability can introduce significant variability on parameter values for predicting the reaction rates for bulk nitrate and the intracellularly stored nitrogen state-variables, thereby requiring scenario specific model calibration. ASM-A was identified using standard cultivation medium and it can provide a platform for extensions accounting for factors influencing algal growth and nutrient storage using wastewater resources. Copyright �

Assessment of ASME code examinations on regenerative, letdown and residual heat removal heat exchangers

International Nuclear Information System (INIS)

Gosselin, Stephen R.; Cumblidge, Stephen E.; Anderson, Michael T.; Simonen, Fredric A.; Tinsley, G A.; Lydell, B.; Doctor, Steven R.

2005-01-01

Inservice inspection requirements for pressure retaining welds in the regenerative, letdown, and residual heat removal heat exchangers are prescribed in Section XI Articles IWB and IWC of the ASME Boiler and Pressure Vessel Code. Accordingly, volumetric and/or surface examinations are performed on heat exchanger shell, head, nozzle-to-head, and nozzle-to-shell welds. Inspection difficulties associated with the implementation of these Code-required examinations have forced operating nuclear power plants to seek relief from the U.S. Nuclear Regulatory Commission. The nature of these relief requests are generally concerned with metallurgical, geometry, accessibility, and radiation burden. Over 60% of licensee requests to the NRC identify significant radiation exposure burden as the principle reason for relief from the ASME Code examinations on regenerative heat exchangers. For the residual heat removal heat exchangers, 90% of the relief requests are associated with geometry and accessibility concerns. Pacific Northwest National Laboratory was funded by the NRC Office of Nuclear Regulatory Research to review current practice with regard to volumetric and/or surface examinations of shell welds of letdown heat exchangers regenerative heat exchangers and residual (decay) heat removal heat exchangers Design, operating, common preventative maintenance practices, and potential degradation mechanisms are reviewed. A detailed survey of domestic and international PWR-specific operating experience was performed to identify pressure boundary failures (or lack of failures) in each heat exchanger type and NSSS design. The service data survey was based on the PIPExp- database and covers PWR plants worldwide for the period 1970-2004. Finally a risk assessment of the current ASME Code inspection requirements for residual heat removal, letdown, and regenerative heat exchangers is performed. The results are then reviewed to discuss the examinations relative to plant safety and

Tourette Association Chapters

Science.gov (United States)

... com Arizona Email: info@tsa-az.org Website: http://tsa-az.org/ Arkansas Support Group of Northwest ... California/Hawaii Chapter Email: cbrackett2004@yahoo.com Website: http://www.tsanorcal-hawaii.org Southern California Chapter Phone: ...

Efecto de budesonida sobre la densidad y el metabolismo óseo en niños asmáticos

Directory of Open Access Journals (Sweden)

Paoli de Valeri Mariela

2000-01-01

Full Text Available OBJETIVO: Determinar el efecto de la administración de budesonida inhalado sobre la densidad, el contenido mineral y el metabolismo óseo en niños asmáticos. MATERIAL Y MÉTODOS: Estudio transversal realizado de septiembre de 1996 a julio de 1997, en el que se estudiaron 38 niños y niñas de entre 6 y 11 años de edad, seleccionados de la consulta externa de neumonología infantil del Instituto Autónomo Hospital Universitario de Los Andes, Mérida, Venezuela. Se constituyeron tres grupos: nueve niños asmáticos tratados con budesonida inhalado (300 µg/día en promedio durante más de seis meses, (grupo A, 14 niños asmáticos que no recibieron tratamiento esteroideo (grupo B y 15 niños no asmáticos (grupo C. A todos se les practicó una evaluación ósea con marcadores de formación y resorción y con una medición de la densidad (DMO y el contenido mineral óseo (CMO. Se calcularon medidas de tendencia central y de dispersión, se realizó análisis de varianza, y se utilizaron las pruebas de Fisher y Scheffé para comparación de medias. RESULTADOS: En los grupos estudiados (A, B y C los niveles séricos de calcio fueron 9.1±0.3; 9.6±0.4; 9.3±0.6 mg/ml; los de osteocalcina fueron 14.8±4.6; 13.0±2.5; 11.9±3.4 ng/dl; los de telopéptido carboxiterminal del colágeno tipo I (ICTP fueron 19.6±16.5; 14.2±15.4; 13.0±18.3 µg/l; la DMO fue de 0.67±0.06; 0.68±0.06; 0.69±0.06 g/cm², y el CMO fue de 1 158.8±217.4; 1 106.4±256.1; 1 176.5±240.5 g, respectivamente. No hubo diferencias significativas entre los grupos. CONCLUSIONES: La administración de budesonida inhalada en dosis de 100 a 400 µg/día por un periodo de seis meses no produce modificaciones en la densidad y en el metabolismo óseo en niños asmáticos.

Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR and GEN IV

International Nuclear Information System (INIS)

O'Donnell, William J.; Griffin, Donald S.

2007-01-01

The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

Comportamiento de variables clínico-epidemiológicas en pacientes asmáticos. Consultorio Médico de Familia 14, Puerto Padre

Directory of Open Access Journals (Sweden)

José Ramón Martínez Pérez

2015-12-01

Full Text Available Se realizó un estudio descriptivo de corte transversal en 40 pacientes asmáticos de todas las edades, pertenecientes al Consultorio 14 del área de salud de Puerto Padre, provincia de Las Tunas, durante los meses de enero a junio de 2008; con el objetivo de determinar el comportamiento de variables clínico-epidemiológicas en dichos pacientes. Para cumplimentar los objetivos se diseñó una encuesta que recogió las variables de interés. El análisis se hizo a través del sistema Statistix, permitiendo  obtener  la distribución de frecuencia y los porcientos. El test de Chi-Cuadrado se empleó en la comparación de variables cualitativas. Los resultados fueron descritos, interpretados y comparados con otros estudios. Se concluye que los pacientes grado I según Kraeppelin son los mas representados en nuestra población de pacientes asmáticos;  los broncodilatadores son los medicamentos mas utilizados por la población asmática estudiada; el incumplimiento del tratamiento medicamentoso no se relacionó con la severidad de la enfermedad en la población estudiada;  las malas condiciones de la vivienda y  el tabaquismo influyeron de forma negativa en la evolución del paciente asmático.

Analysis of the ASME methodology for evaluation of erosion-corrosion defects with respect to the differences in the calculation and in materials used at the Dukovany NPP

International Nuclear Information System (INIS)

Kadecka, P.

1995-01-01

The problem of evaluation of tolerable defects and thinning of pipe walls was analyzed. In fact, a procedure for evaluation of tolerable defects is described in ASME Code Case N 480 based on the ASME ''Rules for Construction of Nuclear Power Plant Components''. The pipe systems of the Dukovany NPP, however, were constructed to different (East European) standards, and therefore caution should be exercised when applying US standards to this plant. The report demonstrates major differences between the ASME Standard and the proposed Czech standard ''A.S.I. Standards Documentation for Strength Calculations of Equipment and Piping of WWER Type Nuclear Power Plants'' developed by the Czech Association of Mechanical Engineers (A.S.I), evaluates the applicability of Code Case N 480 to the Dukovany plant, and proposes a Czech procedure for the evaluation. The basic characteristics of materials cited by ASME II and carbon steels used in the secondary circuit of the Dukovany NPP are also compared. (P.A.). 78 tabs., 2 figs., 4 refs

Chapter 10: Management recommendations

Science.gov (United States)

Deborah M. Finch; Janie Agyagos; Tracy McCarthey; Robert M. Marshall; Scott H. Stoleson; Mary J. Whitfield

2000-01-01

This chapter was developed over a series of meetings using a group-consensus process. Our recommendations are based on published results, on information compiled in the previous chapters, on expert opinion, and on unpublished data of conservation team members. This chapter is available as temporary guidance until the Recovery Plan for the southwestern willow flycatcher...

FY16 ASME High Temperature Code Activities

Energy Technology Data Exchange (ETDEWEB)

Swindeman, M. J. [Chromtech Inc., Oak Ridge, TN (United States); Jetter, R. I. [R. I Jetter Consulting, Pebble Beach, CA (United States); Sham, T. -L. [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-09-01

One of the objectives of the ASME high temperature Code activities is to develop and validate both improvements and the basic features of Section III, Division 5, Subsection HB, Subpart B (HBB). The overall scope of this task is to develop a computer program to be used to assess whether or not a specific component under specified loading conditions will satisfy the elevated temperature design requirements for Class A components in Section III, Division 5, Subsection HB, Subpart B (HBB). There are many features and alternative paths of varying complexity in HBB. The initial focus of this task is a basic path through the various options for a single reference material, 316H stainless steel. However, the program will be structured for eventual incorporation all the features and permitted materials of HBB. Since this task has recently been initiated, this report focuses on the description of the initial path forward and an overall description of the approach to computer program development.

Large-Eddy Simulation of pollutant dispersion in downtown Montreal: Evaluation of the convective and turbulent mass fluxes

NARCIS (Netherlands)

Gousseau, P.; Blocken, B.J.E.; Stathopoulos, T.; Heijst, van G.J.F.; Seppelt, R.; Voinov, A.A.; Lange, S.; Bankamp, D.

2012-01-01

Abstract: Large-Eddy Simulation of pollutant dispersion from a stack on the roof of a low-rise building in downtown Montreal is performed. Two wind directions are considered, with different wind flow patterns and plume behaviours. The resulting mean concentration field is observed and analysed with

Draft ASME code case on ductile cast iron for transport packaging

International Nuclear Information System (INIS)

Saegusa, T.; Arai, T.; Hirose, M.; Kobayashi, T.; Tezuka, Y.; Urabe, N.; Hueggenberg, R.

2004-01-01

The current Rules for Construction of ''Containment Systems for Storage and Transport Packagings of Spent Nuclear Fuel and High Level Radioactive Material and Waste'' of Division 3 in Section III of ASME Code (2001 Edition) does not include ductile cast iron in its list of materials permitted for use. The Rules specify required fracture toughness values of ferritic steel material for nominal wall thickness 5/8 to 12 inches (16 to 305 mm). New rule for ductile cast iron for transport packaging of which wall thickness is greater than 12 inches (305mm) is required

14 CFR 203.4 - Montreal Agreement as part of airline-passenger contract and conditions of carriage.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Montreal Agreement as part of airline-passenger contract and conditions of carriage. 203.4 Section 203.4 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS WAIVER OF WARSAW CONVENTION LIABILITY LIMITS AND DEFENSES § 203.4...

Activated sludge model (ASM) based modelling of membrane bioreactor (MBR) processes: a critical review with special regard to MBR specificities.

Science.gov (United States)

Fenu, A; Guglielmi, G; Jimenez, J; Spèrandio, M; Saroj, D; Lesjean, B; Brepols, C; Thoeye, C; Nopens, I

2010-08-01

Membrane bioreactors (MBRs) have been increasingly employed for municipal and industrial wastewater treatment in the last decade. The efforts for modelling of such wastewater treatment systems have always targeted either the biological processes (treatment quality target) as well as the various aspects of engineering (cost effective design and operation). The development of Activated Sludge Models (ASM) was an important evolution in the modelling of Conventional Activated Sludge (CAS) processes and their use is now very well established. However, although they were initially developed to describe CAS processes, they have simply been transferred and applied to MBR processes. Recent studies on MBR biological processes have reported several crucial specificities: medium to very high sludge retention times, high mixed liquor concentration, accumulation of soluble microbial products (SMP) rejected by the membrane filtration step, and high aeration rates for scouring purposes. These aspects raise the question as to what extent the ASM framework is applicable to MBR processes. Several studies highlighting some of the aforementioned issues are scattered through the literature. Hence, through a concise and structured overview of the past developments and current state-of-the-art in biological modelling of MBR, this review explores ASM-based modelling applied to MBR processes. The work aims to synthesize previous studies and differentiates between unmodified and modified applications of ASM to MBR. Particular emphasis is placed on influent fractionation, biokinetics, and soluble microbial products (SMPs)/exo-polymeric substances (EPS) modelling, and suggestions are put forward as to good modelling practice with regard to MBR modelling both for end-users and academia. A last section highlights shortcomings and future needs for improved biological modelling of MBR processes. (c) 2010 Elsevier Ltd. All rights reserved.

Modifications to LLNL Plutonium Packaging Systems (PuPS) to achieve ASME VIII UW-13.2(d) Requirements for the DOE Standard 3013-00 Outer Can Weld

International Nuclear Information System (INIS)

Riley, D; Dodson, K

2001-01-01

The Lawrence Livermore National Laboratory (LLNL) Plutonium Packaging System (PuPS) prepares packages to meet the DOE Standard 3013 (Reference 1). The PuPS equipment was supplied by the British Nuclear Fuels Limited (BNFL). The DOE Standard 3013 requires that the welding of the Outer Can meets ASME Section VIII Division 1 (Reference 2). ASME Section VIII references to ASME Section IX (Reference 3) for most of the welding requirements, but UW-13.2 (d) of Section VIII requires a certain depth and width of the weld. In this document the UW-13.2(d) requirement is described as the (a+b)/2t s ratio. This ratio has to be greater than or equal to one to meet the requirements of UW-13.2(d). The Outer Can welds had not been meeting this requirement. Three methods are being followed to resolve this issue: (1) Modify the welding parameters to achieve the requirement, (2) Submit a weld case to ASME that changes the UW-13.2(d) requirement for their review and approval, and (3) Change the requirements in the DOE-STD-3013. Each of these methods are being pursued. This report addresses how the first method was addressed for the LLNL PuPS. The experimental work involved adjusting the Outer Can rotational speed and the power applied to the can. These adjustments resulted in being able to achieve the ASME VIII, UW-13.2(d) requirement

Growing Physics and Astronomy Public Outreach in Montreal

Science.gov (United States)

Simard, Gabrielle; Lepo, Kelly

2017-01-01

AstroMcGill was founded in 2011 by an enthusiastic group of undergraduate students, graduate students and post-doctoral fellows. It serves as the education and public outreach (EPO) branch of the astronomy group within the Physics Department at McGill University in Montreal, Quebec. Over the last five years, AstroMcGill has grown from organizing sporadic visits in a couple primary schools to running a successful inquiry-based outreach programme for grade 4-6 students, the McGill Space Explorers. During the same time span, the attendance at public AstroNight lectures ramped up from attracting a few dozen people to over 500 people each month. We will highlight the recent successes of the programme and our best guesses for the reasons behind this success. We will also discuss the challenges of working in a bilingual city as we juggle our majority anglophone volunteers, a mandatory french science curriculum for primary school children and the (somewhat) overlapping English- and French-speaking communities in the city.

Ascomycin macrolactam derivative SDZ ASM 981 inhibits the release of granule-associated mediators and of newly synthesized cytokines in RBL 2H3 mast cells in an immunophilin-dependent manner.

Science.gov (United States)

Hultsch, T; Müller, K D; Meingassner, J G; Grassberger, M; Schopf, R E; Knop, J

1998-09-01

Mast cells play an important role in the pathological development of many inflammatory and allergic diseases and inhibition of mast cell activation is a potential target for therapeutic intervention. Therefore, the effect of the novel ascomycin macrolactam derivative SDZ ASM 981 on Fc epsilonRI-mediated activation of rat basophilic leukemia (RBL) cells, as a model for mast cell activation, was investigated. First, the ability to inhibit different mast cell immunophilins in vitro was tested. Using recombinant macrophilin-12 (FKBP-12), inhibition of rotamase activity with an IC50 of approximately 6 nM was observed. The rotamase activity of cyclophilin A (18 kDa) was not affected. Secondly, the effect of SDZ ASM 981 on Fc epsilonRI-mediated mast cell activation was investigated in the RBL cell model. SDZ ASM 981 inhibited exocytosis of preformed mediators (e.g. serotonin) with an IC50 of approximately 30 nM. Transcription and release of newly synthesized mediators (e.g. TNF-alpha) was inhibited with an IC50 of approximately 100 nM. The inhibitory effect of SDZ ASM 981 was antagonized by rapamycin. We conclude that SDZ ASM 981 is a potent inhibitor of Fc epsilonRI-mediated activation of mast cells in vitro. The mechanism of action involves formation of (calcineurin) inhibitory complexes with macrophilins. We suggest that this inhibitory action on mast cells might contribute to the antiinflammatory effect of SDZ ASM 981 observed in vivo (e.g. in aptopic dermatitis and psoriasis).

Methodology and guidelines for evaluation of welded attachments on ASME Class 1,2, or 3 piping

International Nuclear Information System (INIS)

Chang, K.C.; Adams, T.M.; Rodabaugh, E.C.

1985-01-01

The ASME Boiler and Pressure Vessel Code, Section III Subsection NB/NC/ND-3600 provides simplified rules for the evaluation and qualification of piping components. The use of rectangular and hollow, circular welded attachments (hereafter called lugs and trunions) is sometimes necessary in order to provide support for piping systems. The Code provides a set of simple and conservative equations, the associated stress indicies, and specified limitations on their applicability for lugs on Class 1 and Class 2/3 piping in Code Cases N-122 and N-318 respectively. Two new ASME Section III Code Cases, N-391 and N-392, have been prepared to provide the corresponding design guidelines for specific trunion configurations. This paper presents the background on the major concepts involved in the development of these Code Cases and provides some general guidelines to the analysts and designers for the qualification of the attachments not covered by the Code Cases

Clinical applications of positron emission tomography at Montreal Neurological Institute

International Nuclear Information System (INIS)

Morgan, P.P.

1983-01-01

The Montreal Neurological Institute occupies a leading position in positron emission tomography (PET) of the brain with the help of the following three techological gains: they have acquired a 'Therascan' positron emission tomograph manufactured by Atomic Energy of Canada Ltd.; also, a 'Baby Cyclotron' manufactured by Japan Steel Works Ltd.; and they have written a computer program to display the results in colour. Four short-lived isotopes are used; 11 C, 15 O, 18 F, 13 N. Studies of the oxygen uptake of tumours, their glucose metabolism (as monitored by 18 F labelled 2-fluoro-2-deoxyglucose), and their uptake of therapeutic agents, provide valuable research and diagnostic information. PET is also being used to study epilepsy and cerebrovascular disease

Using ASM Podcasts to Excite Undergraduate Students about Current Microbiological Research

Directory of Open Access Journals (Sweden)

Stacey E. Lettini

2014-08-01

Full Text Available Innovative technology is often used as a mechanism to engage students in and out of the classroom and can be used to increase critical thinking skills. Podcasts are an excellent way to introduce students to current topics and research in microbiology. The American Society for Microbiology (ASM produces three podcasts that are microbiologically focused: This Week in Microbiology (TWiM, This Week in Parasitology (TWiP, and This Week in Virology (TWiV. These podcasts are usually presented in a manner similar to a journal club, as the presenters regularly invite guests to discuss current research papers. Since students often find reading scientific literature difficult and get bogged down in the details rather than seeing the over-arching purpose of a paper, these podcasts have been used in a General Microbiology course to introduce recent research articles. The students were first assigned an original research article to read and review, and they were asked to generate questions pertaining to things they did not understand. Next, students listened to the corresponding podcast that discussed the article and used it to answer their questions. This was followed by a classroom discussion of the article and the podcast. The ASM podcast helped to demystify original research by providing details of the experimental design and presentation of the results in a language that is more casual and relatable. Students demonstrated greater critical thinking and comprehension of microbiology literature after listening to the podcast. This activity can be used in a variety of courses in the biology curriculum.

Batse/Sax and Batse/RXTE-ASM Joint Spectral Studies of GRBs

Science.gov (United States)

Paciesas, William S.

2002-01-01

We proposed to make joint spectral analysis of gamma-ray bursts (GRBs) in the BATSE data base that are located within the fields of view of either the BeppoSAX wide field cameras (WFCs) or the RXTE all-sky monitor (ASM). The very broad-band coverage obtained in this way would facilitate various studies of GRB spectra that are difficult to perform with BATSE data alone. Unfortunately, the termination of the CGRO mission in June 2000 was not anticipated at the time of the proposal, and the sample of common events turned out to be smaller than we would have liked.

Materials and design bases issues in ASME Code Case N-47

International Nuclear Information System (INIS)

Huddleston, R.L.; Swindeman, R.W.

1993-04-01

A preliminary evaluation of the design bases (principally ASME Code Case N-47) was conducted for design and operation of reactors at elevated temperatures where the time-dependent effects of creep, creep-fatigue, and creep ratcheting are significant. Areas where Code rules or regulatory guides may be lacking or inadequate to ensure the operation over the expected life cycles for the next-generation advanced high-temperature reactor systems, with designs to be certified by the US Nuclear Regulatory Commission, have been identified as unresolved issues. Twenty-two unresolved issues were identified and brief scoping plans developed for resolving these issues

Cyberinfrastructure for Open Science at the Montreal Neurological Institute.

Science.gov (United States)

Das, Samir; Glatard, Tristan; Rogers, Christine; Saigle, John; Paiva, Santiago; MacIntyre, Leigh; Safi-Harab, Mouna; Rousseau, Marc-Etienne; Stirling, Jordan; Khalili-Mahani, Najmeh; MacFarlane, David; Kostopoulos, Penelope; Rioux, Pierre; Madjar, Cecile; Lecours-Boucher, Xavier; Vanamala, Sandeep; Adalat, Reza; Mohaddes, Zia; Fonov, Vladimir S; Milot, Sylvain; Leppert, Ilana; Degroot, Clotilde; Durcan, Thomas M; Campbell, Tara; Moreau, Jeremy; Dagher, Alain; Collins, D Louis; Karamchandani, Jason; Bar-Or, Amit; Fon, Edward A; Hoge, Rick; Baillet, Sylvain; Rouleau, Guy; Evans, Alan C

2016-01-01

Data sharing is becoming more of a requirement as technologies mature and as global research and communications diversify. As a result, researchers are looking for practical solutions, not only to enhance scientific collaborations, but also to acquire larger amounts of data, and to access specialized datasets. In many cases, the realities of data acquisition present a significant burden, therefore gaining access to public datasets allows for more robust analyses and broadly enriched data exploration. To answer this demand, the Montreal Neurological Institute has announced its commitment to Open Science, harnessing the power of making both clinical and research data available to the world (Owens, 2016a,b). As such, the LORIS and CBRAIN (Das et al., 2016) platforms have been tasked with the technical challenges specific to the institutional-level implementation of open data sharing, including: Comprehensive linking of multimodal data (phenotypic, clinical, neuroimaging, biobanking, and genomics, etc.)Secure database encryption, specifically designed for institutional and multi-project data sharing, ensuring subject confidentiality (using multi-tiered identifiers).Querying capabilities with multiple levels of single study and institutional permissions, allowing public data sharing for all consented and de-identified subject data.Configurable pipelines and flags to facilitate acquisition and analysis, as well as access to High Performance Computing clusters for rapid data processing and sharing of software tools.Robust Workflows and Quality Control mechanisms ensuring transparency and consistency in best practices.Long term storage (and web access) of data, reducing loss of institutional data assets.Enhanced web-based visualization of imaging, genomic, and phenotypic data, allowing for real-time viewing and manipulation of data from anywhere in the world.Numerous modules for data filtering, summary statistics, and personalized and configurable dashboards. Implementing

Description of comprehensive pump test change to ASME OM code, subsection ISTB

International Nuclear Information System (INIS)

Hartley, R.S.

1994-01-01

The American Society of Mechanical Engineers (ASME) Operations and Maintenance (OM) Main Committee and Board on Nuclear Codes and Standards (BNCS) recently approved changes to ASME OM Code-1990, Subsection ISTB, Inservice Testing of Pumps in Light-Water Reactor Power Plants. The changes will be included in the 1994 addenda to ISTB. The changes, designated as the comprehensive pump test, incorporate a new, improved philosophy for testing safety-related pumps in nuclear power plants. An important philosophical difference between the open-quotes old codeclose quotes inservice testing (IST) requirements and these changes is that the changes concentrate on less frequent, more meaningful testing while minimizing damaging and uninformative low-flow testing. The comprehensive pump test change establishes a more involved biannual test for all pumps and significantly reduces the rigor of the quarterly test for standby pumps. The increased rigor and cost of the biannual comprehensive tests are offset by the reduced cost of testing and potential damage to the standby pumps, which comprise a large portion of the safety-related pumps at most plants. This paper provides background on the pump testing requirements, discusses potential industry benefits of the change, describes the development of the comprehensive pump test, and gives examples and reasons for many of the specific changes. This paper also describes additional changes to ISTB that will be included in the 1994 addenda that are associated with, but not part of, the comprehensive pump test

Trade restrictions as a means of enforcing compliance with international environmental law. Montreal Protocol on Substances that Deplete the Ozone Layer

International Nuclear Information System (INIS)

Lang, W.

1996-01-01

The contribution reviews primarily Art. 4 of the Montreal Protocol and its efficiency for enforcing compliance with obligations under international environmental law and discusses aspects of possible conflicts with GATT law. (CB)

Revising the diagnosis of congenital amusia with the Montreal Battery of Evaluation of Amusia

OpenAIRE

Pfeifer, Jasmin; Hamann, Silke

2015-01-01

This article presents a critical survey of the prevalent usage of the Montreal Battery of Evaluation of Amusia (MBEA; Peretz et al., 2003) to assess congenital amusia, a neuro-developmental disorder that has been claimed to be present in 4% of the population (Kalmus and Fry, 1980). It reviews and discusses the current usage of the MBEA in relation to cut-off scores, number of used subtests, manner of testing, and employed statistics, as these vary in the literature. Furthermore, data are pres...

Intervención educativa para población infanto-juvenil asmática

Directory of Open Access Journals (Sweden)

Maria Antonia Acevedo Veja

2015-11-01

Full Text Available Se realizó una intervención educativa a la población infanto-juvenil asmática con edades entre ocho y once años en el policlínico de Manatí, Las Tunas, entre enero y julio de 2012, con el objetivo de evaluar la eficacia de la misma. La población de estudio estuvo formada por los 258 pacientes asmáticos de los 29 Consultorios de Médico de Familia (CMF del área, y la muestra por los 50 seleccionados por muestreo aleatorio simple. La información se obtuvo mediante un cuestionario que fue aplicado antes y después de la intervención educativa y los datos fueron recogidos durante la consulta y de la historia clínica individual. Se concluyó que predominó el sexo masculino, con antecedentes de primera línea de asma bronquial, con factores desencadenantes tales como: infecciones respiratorias agudas, polvo y humedad, así como aquellos que presentan signos clínicos de reflujo y que tienen una mala técnica de aplicación de spray. Se apreció un insuficiente nivel de conocimientos sobre la evaluación de severidad de la crisis, los factores desencadenantes, el manejo del spray y el tratamiento intercrisis, y las exacerbaciones.

Auriculoterapia en pacientes asmáticos

Directory of Open Access Journals (Sweden)

Adolfo González Salvador

1997-04-01

Full Text Available Se realiza un estudio para evaluar la eficacia de la auriculopuntura en 30 asmáticos del área de salud de Aguada de Pasajeros, durante los meses de noviembre de 1992 a abril de 1993. El tratamiento se aplicó durante un mes, con seguimiento durante los 5 meses posteriores. Se observó una disminución en la frecuencia, intensidad y duración de las crisis de asma; la mayoría de los pacientes tuvo una evolución satisfactoria y no se presentaron complicaciones. Se concluye que la auriculoterapia es un método útil en pacientes con asma bronquial debido a su eficacia e inocuidadA study was conducted to evaluate the efficacy of auriculopuncture in 30 asthmatic patients from the health area of Aguada de Pasajeros between November, 1992, and April, 1993. The treatment was applied for a month, with a follow-up during the next 5 months. It was observed a reduction in the frequency, intensity and duration of the asthma crises. Most of the patients had a satisfactory evolution and there were no complications. It is concluded that auriculotherapy is a useful method for patients with bronchial asthma due to its effectiveness and innocuousness.

Chapter 13. Radionuclides in medicine

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with problems connected with using of radionuclides in medicine. Methods of treatment with using of radionuclides are reviewed. Chapter consists of next parts: (1) Remotion of thyroid gland; (2) Treatment of cerebrally tumour in nuclear reactor; (3) Artificial heart

Evaluation of flaws in ferritic piping: ASME Code Appendix J, Deformation Plasticity Failure Assessment Diagram (DPFAD)

International Nuclear Information System (INIS)

Bloom, J.M.

1991-08-01

This report summarizes the methods and bases used by an ASME Code procedure for the evaluation of flaws in ferritic piping. The procedure is currently under consideration by the ASME Boiler and Pressure Vessel Code Committee of Section 11. The procedure was initially proposed in 1985 for the evaluation of the acceptability of flaws detected in piping during in-service inspection for certain materials, identified in Article IWB-3640 of the ASME Boiler and Pressure Vessel Code Section 11 ''Rules for In-service Inspection of Nuclear Power Plant Components.'' for which the fracture toughness is not sufficiently high to justify acceptance based solely on the plastic limit load evaluation methodology of Appendix C and IWB-3641. The procedure, referred to as Appendix J, originally included two approaches: a J-integral based tearing instability (J-T) analysis and the deformation plasticity failure assessment diagram (DPFAD) methodology. In Appendix J, a general DPFAD approach was simplified for application to part-through wall flows in ferritic piping through the use of a single DPFAD curve for circumferential flaws. Axial flaws are handled using two DPFAD curves where the ratio of flaw depth to wall thickness is used to determine the appropriate DPFAD curve. Flaws are evaluated in Appendix J by comparing the actual pipe applied stress with the allowable stress with the appropriate safety factors for the flaw size at the end of the evaluation period. Assessment points for circumferential and axial flaws are plotted on the appropriate failure assessment diagram. In addition, this report summarizes the experimental test predictions of the results of the Battelle Columbus Laboratory experiments, the Eiber experiments, and the JAERI tests using the Appendix J DPFAD methodology. Lastly, this report also provides guidelines for handling residual stresses in the evaluation procedure. 22 refs., 13 figs., 5 tabs

A Retrospective Look at 20 Years of ASM Education Programs (1990-2010) and a Prospective Look at the Next 20 Years (2011-2030).

Science.gov (United States)

Chang, Amy

2011-01-01

Professional societies provide visibility and legitimacy to the work of their post secondary educator members, advocate best practices in courses and sponsored student research, and establish deep networks and communities that catalyze members to collectively engage in undergraduate teaching and learning scholarship. Within the American Society for Microbiology (ASM), the Education Board, established in the mid-1970s, assumes this role. I have been fortunate enough to watch several pivotal programs support our growth and change the status quo by providing opportunities for biology educators to flourish. In this retrospective review, the background and details I offer about each initiative help explain ASM Education offerings, how our growth has been supported and how the status quo has changed. In this prospective look, I offer my vision of the future in post secondary education where classroom learning is student-centered and focused on global problems affecting our health and environment. For the profession to proliferate, the ASM must provide members as many opportunities in learning biology as they do with advancing biology to new frontiers.

Challenge - converting to ANSI/ASME NQA Standard 1

International Nuclear Information System (INIS)

Nansen, J.N.

1983-03-01

Prior to August, 1980, Westinghouse Hanford Company operated the Hanford Engineering Development Laboratory Quality Program in accordance with the requirements of RDT F 2-2T and RDT F 2-4T and for a short while to ANSI N45.2. Following the issuance of the national consensus standard ANSI/ ASME NQA Standard 1 in August 1979, and its acceptance by DOE, the Laboratory began making changes to meet these requirements in its internal quality program in August 1980. This was followed with the invoking of these requirements on supplier's programs and all procurement activities in March of 1981. This conversion was completed in approximately six months and provided an opportunity for several improvements. The keynote of this standard is flexibility. A major improvement noted was in the flexibility of application. The program can be tailored to meet specific needs. Vendor surveys under NQA-1 have shown positive results in that the organization and structure of the standard is much easier to follow and understand

Meeting report on the ASM Conference on Mechanisms of Interbacterial Cooperation and Competition.

Science.gov (United States)

Lories, Bram; Parijs, Ilse; Foster, Kevin R; Steenackers, Hans P

2017-08-14

The ASM Conference on Mechanisms of Interbacterial Cooperation and Competition was held in Washington DC, from 1 to 4 March 2017. The conference provided an international forum for sociomicrobiologists from different disciplines to present and discuss new findings. The meeting covered a wide range of topics, spanning molecular mechanisms, ecology, evolution, computation and manipulation of interbacterial interactions, and encompassed social communities in medicine, the natural environment, and industry. This report summarizes the presentations and emerging themes. Copyright © 2017 American Society for Microbiology.

Nupack, the new ASME code for radioactive material transportation packaging containments

International Nuclear Information System (INIS)

Turula, P.

1998-01-01

The American Society of Mechanical Engineers (ASME) has added a new division to the nuclear construction section of its Boiler and Pressure Vessel Code (B and PVC). This Division, commonly referred to as Nupack, has been written to provide a consistent set of technical requirements for containment vessels of transportation packagings for high-level radioactive materials. This paper provides an introduction to Nupack, discusses some of its technical provisions, and describes how it can be used for the design and construction of packaging components. Nupack's general provisions and design requirements are emphasized, while treatment of materials, fabrication and inspection is left for another paper

Nuclear component design ontology building based on ASME codes

International Nuclear Information System (INIS)

Bao Shiyi; Zhou Yu; He Shuyan

2005-01-01

The adoption of ontology analysis in the study of concept knowledge acquisition and representation for the nuclear component design process based on computer-supported cooperative work (CSCW) makes it possible to share and reuse numerous concept knowledge of multi-disciplinary domains. A practical ontology building method is accordingly proposed based on Protege knowledge model in combination with both top-down and bottom-up approaches together with Formal Concept Analysis (FCA). FCA exhibits its advantages in the way it helps establish and improve taxonomic hierarchy of concepts and resolve concept conflict occurred in modeling multi-disciplinary domains. With Protege-3.0 as the ontology building tool, a nuclear component design ontology based ASME codes is developed by utilizing the ontology building method. The ontology serves as the basis to realize concept knowledge sharing and reusing of nuclear component design. (authors)

Developments on ASME Code Cases to Risk-Informed Repair/Replacement Activities in Support of Risk-Informed Regulation Initiatives

International Nuclear Information System (INIS)

Balkey, Kenneth R.; Holston, William C.

2002-01-01

ASME Code Case N-658, 'Risk-Informed Safety Classification for Use in Risk-Informed Repair/Replacement Activities' and Code Case N-660, 'Alternative Repair/Replacement Requirements For Items Classified In Accordance With Risk-Informed Processes' are being completed to expand the breadth of risk-informed requirements for pressure-retaining items. This initiative, which is built from prior ASME Section XI risk-informed inservice inspection developments over the past decade, has been undertaken in conjunction with U.S. risk-informed regulation efforts. The U.S. Nuclear Regulatory Commission (NRC) is working with the industry on risk informing Title 10 Code of Federal Regulations Part 50 (10CFR50). The Nuclear Regulatory Commission's basic proposal is to allow modification of some of the special treatment requirements of 10CFR50. Their effort is proceeding via an Advanced Notice of Public Rulemaking, March 3, 2000, and an announcement of Availability of Draft Rule Wording, November 29, 2001, to add 10 CFR 50.69, 'Risk-Informed Treatment of Structures, Systems and Components'. A parallel task by the Nuclear Energy Institute (NEI) to develop a guideline on how to implement the results of the rulemaking is also well underway via NEI 00-04 (Draft Revision B), 'Option 2 Implementation Guideline', May 2001. This paper summarizes the content and status of approval of the proposed ASME Code Cases, including how they relate to the above NRC and NEI efforts. Some initial results from trial application of the Code Cases will also be cited. (authors)

Handbook of plastic foams: types, properties, manufacture, and applications

National Research Council Canada - National Science Library

Landrock, Arthur H

1995-01-01

... is an introduction and also covers the subject of foam formation. The chapter includes a discussion of the Montreal Protocol mandating the development of foams with substantially reduced CFC content by 1995. Chapter 2 is a comprehensive discussion of thermosetting foams of all types, with the emphasis on urethane and phenolic foams. The authors, K Ashida and K Iwa...

The Montreal Cognitive Assessment (MoCA) is superior to the Mini Mental State Examination (MMSE) in detection of korsakoffs syndrome

NARCIS (Netherlands)

Oudman, Erik; Postma, Albert; Van Der Stigchel, Stefan; Appelhof, Britt; Wijnia, Jan W.; Nijboer, Tanja C W

2014-01-01

The Montreal Cognitive Assessment (MoCA) and Mini Mental State Examination (MMSE) are brief screening instruments for cognitive disorders. Although these instruments have frequently been used in the detection of dementia, there is currently little knowledge on the validity to detect Korsakoffs

Brazing handbook

CERN Document Server

American Welding Society

2007-01-01

By agreement between the American Welding Society C3 Committee on Brazing and Soldering and the ASM Handbook Committee, the AWS Brazing Handbook has been formally adopted as part of the ASM Handbook Series. Through this agreement, the brazing content in the ASM Handbook is significantly updated and expanded. The AWS Brazing Handbook, 5th Edition provides a comprehensive, organized survey of the basics of brazing, processes, and applications. Addresses the fundamentals of brazing, brazement design, brazing filler metals and fluxes, safety and health, and many other topics. Includes new chapters on induction brazing and diamond brazing.

Procedures of ASME code case N-201 for KALIMER. Reactor internal structures

International Nuclear Information System (INIS)

Koo, Gyeong Hoi; Yoo, B.

2001-02-01

The main objective of this report is to describe the design procedure of ASME Boiler and Pressure Vessel Code, Code Case N-201-4, which is an elevated temperature structural design code of the Nuclear reactor internal structures, checking the criteria of stress limit, accumulated inelastic strain and deformation, creep-fatigue damage, and buckling limit. As one of examples, the creep-fatigue damage evaluations are carried out for the KALIMER reactor internal structures of baffle annulus. This report is expected to be very useful in evaluating the structural integrity of the liquid metal reactor operating under an elevated temperature

ASME N510 test results for Savannah River Site AACS filter compartments

Energy Technology Data Exchange (ETDEWEB)

Paul, J.D.; Punch, T.M. [Westinghouse Savannah River Company, Aiken, SC (United States)

1995-02-01

The K-Reactor at the Savannah River Site recently implemented design improvements for the Airborne Activity Confinement System (AACS) by procuring, installing, and testing new Air Cleaning Units, or filter compartments, to ASME AG-11, N509, and N510 requirements. Specifically, these new units provide documentable seismic resistance to a Design Basis Accident earthquake, provide 2 inch adsorber beds with 0.25 second residence time, and meet all AG-1, N509, and N510 requirements for testability and maintainability. This paper presents the results of the Site acceptance testing and discusses an issue associated with sample manifold qualification testing.

Whispers of the Unspeakable: New York and Montreal Newspaper Coverage of the Oscar Wilde Trials in 1895

Directory of Open Access Journals (Sweden)

Greg Robinson

2015-03-01

Full Text Available Greg Robinson’s article “Whispers of the Unspeakable: New York and Montreal Newspaper Coverage of the Oscar Wilde Trials in 1895,” originally published in 2010 in the French-language journal Rue des Beaux Arts, no. 24 (2010, is here republished and—with much gratitude—translated (for the original text, please see http://www.oscholars.com/RBA/twenty-four/24.7/Articles.htm. Robinson’s transnational study focuses on how reading the specific language of newspaper reports of the Oscar Wilde case, literally from a distance, from places less emotionally attached to and nationally distinct from the scandal’s epicenter in London, England, provides insight into “the state of everyday public knowledge and discussion of (homosexuality, at least west of the Atlantic”; thus Robinson’s fascinating research, which involves numerous newspapers—from the elite New York Times to the New York Herald, from the Montreal Daily Star to the French-language papers of Quebec—concludes that the popular press, read transnationally, offers key insights into the developing attitudes toward and levels of interest in the newly forming identity of the “homosexual” across societies.

A comparison of the mini mental state exam to the Montreal cognitive assessment in identifying cognitive deficits in Parkinson's disease

NARCIS (Netherlands)

Zadikoff, Cindy; Fox, Susan H.; Tang-Wai, David F.; Thomsen, Teri; de Bie, Rob M. A.; Wadia, Pettarusup; Miyasaki, Janis; Duff-Canning, Sarah; Lang, Anthony E.; Marras, Connie

2008-01-01

Dementia is an important and increasingly recognized problem in Parkinson's disease (PD). The mini-mental state examination (MMSE) often fails to detect early cognitive decline. The Montreal cognitive assessment (MoCA) is a brief tool developed to detect mild cognitive impairment that assesses a

Risk of lung cancer associated with six types of chlorinated solvents: results from two case-control studies in Montreal, Canada

Science.gov (United States)

Methods: Two case-control studies of occupation and lung cancer were conducted in Montreal, including 2,016 cases and 2,001 population controls. Occupational exposure to a host of agents was evaluated using a combination of subject-reported job history and expert assessment. We e...

Magnetic Resonance Imaging. Chapter 15

Energy Technology Data Exchange (ETDEWEB)

Leach, M. O. [The Institute of Cancer Research and The Royal Marsden Hospital, London (United Kingdom)

2014-09-15

In Chapter 14, the principles of nuclear magnetic resonance were presented, along with an introduction to image forming processes. In this chapter, magnetic resonance imaging (MRI) will be reviewed, beginning with the hardware needed and its impact on image quality. The acquisition processes and image reconstruction will be discussed, as well as the artefacts that are possible, with discussion of the important area of safety and bioeffects completing the chapter.

Design specifications for ASME B and PV Code Section III nuclear class 1 piping

International Nuclear Information System (INIS)

Richardson, J.A.

1978-01-01

ASME B and PV Code Section III code regulations for nuclear piping requires that a comprehensive Design Specification be developed for ensuring that the design and installation of the piping meets all code requirements. The intent of this paper is to describe the code requirements, discuss the implementation of these requirements in a typical Class 1 piping design specification, and to report on recent piping failures in operating light water nuclear power plants in the US. (author)

Report on ANSI/ASME nuclear air and gas treatment standards for nuclear power plants

International Nuclear Information System (INIS)

Fish, J.F.

1979-01-01

Original N Committee, N45-8, has completed and published through the approved American National Standards Institute process two Standards, N-509 and N-510. This committee has been dissolved and replaced by ASME Committee on Nuclear Air and Gas Treatment with expanded scope to cover not only air cleaning, but thermal treatment equipment. Current efforts are directed to produce Code documents rather than Standards type publications. This report summarizes changed scope, current organization and sub-committee coverage areas

Environmental Radioactivity. Chapter 4

International Nuclear Information System (INIS)

Muhamat Omar; Ismail Sulaiman; Zalina Laili

2015-01-01

This chapter explains several things which consist radioactivity measurements, regular and high background radioactivity, radioactive contaminated soil and radioactivity in fertilizers, rocks, building materials, food, water, environments, sediments, flora and fauna. Besides, the natural radioactive gas concentration of radon and toron in the environment also been discussed specifically in this chapter.

ASME code and ratcheting in piping components. Final technical report

International Nuclear Information System (INIS)

Hassan, T.; Matzen, V.C.

1999-01-01

The main objective of this research is to develop an analysis program which can accurately simulate ratcheting in piping components subjected to seismic or other cyclic loads. Ratcheting is defined as the accumulation of deformation in structures and materials with cycles. This phenomenon has been demonstrated to cause failure to piping components (known as ratcheting-fatigue failure) and is yet to be understood clearly. The design and analysis methods in the ASME Boiler and Pressure Vessel Code for ratcheting of piping components are not well accepted by the practicing engineering community. This research project attempts to understand the ratcheting-fatigue failure mechanisms and improve analysis methods for ratcheting predictions. In the first step a state-of-the-art testing facility is developed for quasi-static cyclic and seismic testing of straight and elbow piping components. A systematic testing program to study ratcheting is developed. Some tests have already been performed and the rest will be completed by summer'99. Significant progress has been made in the area of constitutive modeling. A number of sophisticated constitutive models have been evaluated in terms of their simulations for a broad class of ratcheting responses. From the knowledge gained from this evaluation study two improved models are developed. These models are demonstrated to have promise in simulating ratcheting responses in piping components. Hence, implementation of these improved models in widely used finite element programs, ANSYS and/or ABAQUS, is in progress. Upon achieving improved finite element programs for simulation of ratcheting, the ASME Code provisions for ratcheting of piping components will be reviewed and more rational methods will be suggested. Also, simplified analysis methods will be developed for operability studies of piping components and systems. Some of the future works will be performed under the auspices of the Center for Nuclear Power Plant Structures

Organizational Strategies for Critical Transportation Infrastructure: Characteristics of Urban Resilience. The Case of Montreal.

Science.gov (United States)

Beauregard, Stéphane; Therrien, Marie-Christine; Normandin, Julie-Maude

2010-05-01

Organizational Strategies for Critical Transportation Infrastructure: Characteristics of Urban Resilience. The Case of Montreal. Stéphane Beauregard M.Sc. Candidate École nationale d'administration publique Julie-Maude Normandin Ph.D. Candidate École nationale d'administration publique Marie-Christine Therrien Professor École nationale d'administration publique The proposed paper presents preliminary results on the resilience of organizations managing critical infrastructure in the Metropolitan Montreal area (Canada). A resilient city is characterized by a network of infrastructures and individuals capable of maintaining their activities in spite of a disturbance (Godschalk, 2002). Critical infrastructures provide essential services for the functioning of society. In a crisis situation, the interruption or a decrease in performance of critical infrastructures could have important impacts on the population. They are also vulnerable to accidents and cascading effects because on their complexity and tight interdependence (Perrow, 1984). For these reasons, protection and security of the essential assets and networks are one of the objectives of organizations and governments. But prevention and recovery are two endpoints of a continuum which include also intermediate concerns: ensuring organizational robustness or failing with elegance rather than catastrophically. This continuum also includes organizational resilience (or system), or the ability to recover quickly after an interruption has occurred. Wildavsky (1988) proposes that anticipation strategies work better against known problems while resilience strategies focus on unknown problems. Anticipation policies can unnecessarily immobilize investments against risks, while resilience strategies include the potential for a certain sacrifice in the interests of a more long-term survival and adaptation to changing threats. In addition, a too large confidence in anticipation strategies can bring loss of capacity of an

Progress toward NuPack, the ASME code for Type B containments

International Nuclear Information System (INIS)

Turula, P.

1995-01-01

This paper presented a brief status report on the development of an ASME Code Division for nuclear packaging and discussed some of the more interesting policy decisions as to what is and is not covered in terms of analytical methods, criteria, scope, and other aspects. The process of the development of this Division has been very slow and inconsistent. There were many participants with many diverse interests. The Division 3 rules are close to being ready to be issued. They are a compromise between many needs and the result is certainly not perfect. Opportunities for fine tuning and expanding this document will present themselves after it is issued as future needs become clear

Probing the Mysteries of the X-Ray Binary 4U 1210-64 with ASM, MAXI and Suzaku

Science.gov (United States)

Coley, Joel B.; Corbet, R.; Mukai, K.; Pottschmidt, K.

2013-01-01

Optical and X-ray observations of 4U 1210-64 (1ES 1210-646) suggest that the source is a High Mass X-ray Binary (HMXB) probably powered by the Be mechanism. Data acquired by the RXTE All Sky Monitor (ASM), the ISS Monitor of All-sky X-ray Image (MAXI) and Suzaku provide a detailed temporal and spectral description of this poorly understood source. Long-term data produced by ASM and MAXI indicate that the source shows two distinct high and low states. A 6.7-day orbital period of the system was found in folded light curves produced by both ASM and MAXI. A two day Suzaku observation in Dec. 2010 took place during a transition from the minimum to the maximum of the folded light curve. The two day Suzaku observation reveals large variations in flux indicative of strong orbit to orbit variability. Flares in the Suzaku light curve can reach nearly 1.4 times the mean count rate. From a spectral analysis of the Suzaku data, emission lines in the Fe K alpha region were detected at 6.4 keV, 6.7 keV and 6.97 keV interpreted as FeI, FeXXV and FeXXVI. In addition, emission lines were observed at approximately 1.0 and 2.6 keV, corresponding to NeX and SXVI respectively. Thermal bremsstrahlung or power law models both modified by interstellar and partially covering absorption provide a good fit to the continuum data. This source is intriguing for these reasons: i) No pulse period was observed; ii) 6.7 day orbital period is much less than typical orbital periods seen in Be/X-ray Binaries; iii) The optical companion is a B5V--an unusual spectral class for an HMXB; iv) There are extended high and low X-ray states.

Present activity in ASME Section XI regarding risk-informed maintenance

International Nuclear Information System (INIS)

Hedden, Owen; Chockie, Alan

2005-01-01

Since 1996 Section XI of the ASME Boiler and Pressure Vessel Code has actively incorporated risk-informed concepts. The risk-informed process provides a framework for allocating inspection resources in a cost-effective manner and helps focus inspections where most critical for plant safety. Based on the success of the risk-informed ISI piping applications at US and non-US plants, Section XI has refined existing Code Cases and expanded the use of the risk-informed process to a variety of high-risk components and systems. The risk informed approach started in the area of inspection and is now being expanded to other plant maintenance activities. This article summarizes the Section XI actions and the continued development of the risk-informed process to improve nuclear plant maintenance. (author)

Evaluation of conservatisms and environmental effects in ASME Code, Section III, Class 1 fatigue analysis

International Nuclear Information System (INIS)

Deardorff, A.F.; Smith, J.K.

1994-08-01

This report documents the results of a study regarding the conservatisms in ASME Code Section 3, Class 1 component fatigue evaluations and the effects of Light Water Reactor (LWR) water environments on fatigue margins. After review of numerous Class 1 stress reports, it is apparent that there is a substantial amount of conservatism present in many existing component fatigue evaluations. With little effort, existing evaluations could be modified to reduce the overall predicted fatigue usage. Areas of conservatism include design transients considerably more severe than those experienced during service, conservative grouping of transients, conservatisms that have been removed in later editions of Section 3, bounding heat transfer and stress analysis, and use of the ''elastic-plastic penalty factor'' (K 3 ). Environmental effects were evaluated for two typical components that experience severe transient thermal cycling during service, based on both design transients and actual plant data. For all reasonable values of actual operating parameters, environmental effects reduced predicted margins, but fatigue usage was still bounded by the ASME Section 3 fatigue design curves. It was concluded that the potential increase in predicted fatigue usage due to environmental effects should be more than offset by decreases in predicted fatigue usage if re-analysis were conducted to reduce the conservatisms that are present in existing component fatigue evaluations

A strategy for implementation of experience based seismic equipment qualification in IEEE and ASME industry standards

International Nuclear Information System (INIS)

Adams, T.M.

1996-01-01

In the past 20 years, extensive data on the performance of mechanical and electric equipment during actual strong motion earthquakes and seismic qualification tests has been accumulated. Recognizing that an experience based approach provides a technically sound and cost effective method for the seismic qualification of some or certain equipment, the IEEE Nuclear Power Engineering Committee and the ASME Committee on Qualification of Mechanical Equipment established a Special Working Group to investigate the incorporation of experienced based methods into the industry consensus codes and standards currently used in the seismic qualification of Seismic Category Nuclear Power Plant equipment. This paper presents the strategy (course of action) which was developed by the Special Working Group for meeting this objective of incorporation of experience based seismic qualification standards used in the design and seismic qualification of seismic category nuclear power plant equipment. This strategy was recommended to both chartering organizations, the IEEE Nuclear Power Engineering Committee and the ASME Committee on Qualification of Mechanical Equipment for their consideration and implementation. The status of the review and implementation of the Special Working Group's recommended strategy by the sponsoring organization is also discussed

Montreal Communication Evaluation Battery--Portuguese version: age and education effects.

Science.gov (United States)

Kerr, Mônica de Souza; Pagliarin, Karina Carlesso; Mineiro, Ana; Ferré, Perrine; Joanette, Yves; Fonseca, Rochele Paz

2015-01-01

To verify age and education effects on communication performance of healthy adults in the Montreal Communication Evaluation Battery, Portuguese version (MAC-PT). The sample comprised 90 healthy adults from Portugal, European Portuguese speakers, divided into nine groups according to educational level (4-9, 10-13, and > 13 years of formal schooling) and age (19-40, 41-64, and 65-80 years). The influence of age and education was assessed by comparing mean scores between groups, using a two-way analysis of variance followed by Bonferroni post hoc tests (p ≤ 0.05). The results showed that participants' performance was influenced by age in pragmatic-inferential, discursive, and prosodic tasks. Education had the greatest influence on the performance in all processes evaluated by the MAC-PT. Age and education seem to influence the communicative performance and should be considered in the assessment of neurological patients.

Commissioning of the first Manicouagan--Montreal 735 line

Energy Technology Data Exchange (ETDEWEB)

Baril, G A; Cahill, K; Dupont, A; Roberge, G

1966-01-01

In order to meet increasing demand, Hydro-Quebec will develop seven hydro power sites on the Manicouagan and Outardes Rivers to generate a total of 5,700 MW and an additional 30 billion kWh by 1973. On August 22, 1962, it was decided that the power would be transmitted over a 650-km network, using three 735-kV lines and six stations. The wet switching surge withstand level was set at 1,350 kV, based on the results obtained with a transient network analyser. The main 735-kV equipment was purchased from several manufacturers to insure prompt delivery and continuity of service. On September 21st, 1965, the Manicouagan-Levis section of the first line was energized at 735 kV, transmitting 300 MW. A month later, the second section of the line was energized and the power generated at the Manicouagan 2 plant was thus transmitted to Montreal. So far, only two pieces of equipment have shown signs of failure without causing, however, any serious shutdown. Results of tests carried out show that operation of a 735-kV network is safe and economical.

Promoting the APS Chapter Program by sharing its history, best practices, and how-to guide for establishing new chapters.

Science.gov (United States)

Hopper, Mari K

2017-03-01

Early establishment of physiological societies in Oklahoma and Ohio demonstrated the benefits of networking physiologists and paved the way for establishing the APS Chapter Program. Designed to promote the general objectives of the APS, the Chapter Program was officially launched in 1995, with Ohio being the first recognized chapter. There are 13 active chapters regularly engaged in numerous activities designed to advance physiology education and research. In the hopes that others will recognize the important offerings of state chapters and consider organizing one, the aims for this paper are to 1) share a brief history, 2) provide rationale for chapter initiation, and 3) describe the process involved in establishing a chapter. In light of current changes in American Medical Association and Liaison Committee on Medical Education guidelines, the present time may be critical in promoting chapters, as they play a vital role in sustaining recognition and support for the discipline. Copyright © 2017 the American Physiological Society.

Appropriate nominal stresses for use with ASME Code pressure-loading stress indices for nozzles

International Nuclear Information System (INIS)

Rodabaugh, E.C.

1976-06-01

This program is part of a cooperative effort with industry to develop and verify analytical methods for assessing the safety of nuclear pressure-vessel and piping-system design. The study of nominal stresses and stress indices described is part of a continuing study of design rules for nozzles in pressure vessels being coordinated by the PVRC Subcommittee on Reinforced Openings and External Loadings. Results from these studies are used by appropriate ASME Code groups in drafting new and improved design rules

Acid sphingomyelinase (Asm) deficiency patients in The Netherlands and Belgium: disease spectrum and natural course in attenuated patients.

Science.gov (United States)

Hollak, C E M; de Sonnaville, E S V; Cassiman, D; Linthorst, G E; Groener, J E; Morava, E; Wevers, R A; Mannens, M; Aerts, J M F G; Meersseman, W; Akkerman, E; Niezen-Koning, K E; Mulder, M F; Visser, G; Wijburg, F A; Lefeber, D; Poorthuis, B J H M

2012-11-01

Niemann-Pick disease (NPD) is a neurovisceral lysosomal storage disorder caused by acid sphingomyelinase (ASM) deficiency, which can be categorized as either Niemann-Pick disease type A [NPD-A], with progressive neurological disease and death in early childhood, or as Niemann-Pick disease type B [NPD-B], with a more variable spectrum of manifestations. Enzyme replacement therapy (ERT) with recombinant sphingomyelinase is currently studied as potential treatment for NPD-B patients. The objective of this study is to characterize the clinical features of patients with ASM deficiency in the Netherlands and Belgium with focus on the natural disease course of NPD-B patients. Prospective and retrospective data on ASM deficient patients were collected in The Netherlands and part of Belgium. Patients with NPD-B that could be followed prospectively were evaluated every 6-12 months for pulmonary function tests, 6 minute walk test (6 MWT), imaging (bone marrow infiltration measured by QCSI, organ volumes by MRI and CT scan of the lungs) and biochemical markers. Twenty-five patients with ASM deficiency were identified (13 males, 12 females, median age 13years, range 1-59 years). Nine patients had died at the time of the study, including four NPD-A patients at the age of 1,1, 2, 3 and five NPDB patents at the age of 5, 6, 43, 56 and 60 years. There was a high prevalence of homozygosity and compound heterozygosity for the common p.Arg608del mutation in 43% and 19% of NPD-B patients, respectively. In NPD-B patients, thrombocytopenia was present in most, while anemia and leucopenia were less common (33% and 6 % respectively). HDL cholesterol was reduced in most patients. Pulmonary disease was severe in several patients. Follow-up up to 11 years revealed a gradual decrease in platelet count. Detailed investigations in 6 NPD-B patients with follow-up in 4 patients revealed remarkable stable disease parameters up to 6 years, with some decline in pulmonary function and 6 MWT. Bone

Solar water heating at Ikea's Montreal store; Chauffage solaire de l'eau courante au magasin Ikea de Montreal

Energy Technology Data Exchange (ETDEWEB)

Lagana, A.; Sonmor, K. [Ecovision experts-conseils inc., Montreal, PQ (Canada)

2010-01-01

The Ikea store in Montreal has integrated an energy efficient solar water heater into its building infrastructure. In June 2010, 30 fixed solar panels were installed on the roof to recuperate energy from the sun for hot water use in the restaurant and store facilities. Prior to this installation, the store was using natural gas for water heating purposes. During a sunny summer day, the solar water heater can provide 100 percent of the hot water needs of the store, even though it was designed to provide only one-third of the heating requirements. The panels are made of copper and painted with black titanium paint. A solution of water and antifreeze circulates in the panels. Digital controls are used at the pumps to control the temperature. The Ikea store uses approximately 3,100 gallons of water per day. The panels provide more than 60 MWh of energy, and represent a savings of 8440 cubic metres of natural gas, and a savings of 19.7 tons of carbon dioxide. The panels cost $1,300 and the return on investment is estimated to be 15.6 years. 3 figs.

Chapter 6: Conclusions and recommendations

International Nuclear Information System (INIS)

1995-01-01

This chapter provides a brief summary of conclusions with respect to project implementation issues. Furthermore, the chapter contains recommendations on future applications of the modelling system and on water resources management in the project area

Secondary School Mathematics, Chapter 13, Perpendiculars and Parallels (I), Chapter 14, Similarity. Student's Text.

Science.gov (United States)

Stanford Univ., CA. School Mathematics Study Group.

The first chapter of the seventh unit in this SMSG series discusses perpendiculars and parallels; topics covered include the relationship between parallelism and perpendicularity, rectangles, transversals, parallelograms, general triangles, and measurement of the circumference of the earth. The second chapter, on similarity, discusses scale…

Summary and conclusions [Chapter 11

Science.gov (United States)

Daniel G. Neary; John N. Rinne; Alvin L.. Medina

2012-01-01

Summaries and conclusions of each chapter are compiled here to provide a “Quick Reference” guide of major results and recommendations for the UVR. More detail can be obtained from individual chapters.

Evaluation of ASME code flaw analysis procedure using the influence function method for application to PWR primary piping

International Nuclear Information System (INIS)

Hong, S.Y.; Yeater, M.L.

1985-01-01

This paper discusses stress intensity factor calculations and fatigue analysis for a PWR primary coolant piping system. The influence function method is applied to evaluate ASME Code Section XI Appendix A ''analysis of flaw indication'' for the application to a PWR primary piping. Results of the analysis are discussed in detail. (orig.)

Code cases for implementing risk-based inservice testing in the ASME OM code

International Nuclear Information System (INIS)

Rowley, C.W.

1996-01-01

Historically inservice testing has been reasonably effective, but quite costly. Recent applications of plant PRAs to the scope of the IST program have demonstrated that of the 30 pumps and 500 valves in the typical plant IST program, less than half of the pumps and ten percent of the valves are risk significant. The way the ASME plans to tackle this overly-conservative scope for IST components is to use the PRA and plant expert panels to create a two tier IST component categorization scheme. The PRA provides the quantitative risk information and the plant expert panel blends the quantitative and deterministic information to place the IST component into one of two categories: More Safety Significant Component (MSSC) or Less Safety Significant Component (LSSC). With all the pumps and valves in the IST program placed in MSSC or LSSC categories, two different testing strategies will be applied. The testing strategies will be unique for the type of component, such as centrifugal pump, positive displacement pump, MOV, AOV, SOV, SRV, PORV, HOV, CV, and MV. A series of OM Code Cases are being developed to capture this process for a plant to use. One Code Case will be for Component Importance Ranking. The remaining Code Cases will develop the MSSC and LSSC testing strategy for type of component. These Code Cases are planned for publication in early 1997. Later, after some industry application of the Code Cases, the alternative Code Case requirements will gravitate to the ASME OM Code as appendices

Code cases for implementing risk-based inservice testing in the ASME OM code

Energy Technology Data Exchange (ETDEWEB)

Rowley, C.W.

1996-12-01

Historically inservice testing has been reasonably effective, but quite costly. Recent applications of plant PRAs to the scope of the IST program have demonstrated that of the 30 pumps and 500 valves in the typical plant IST program, less than half of the pumps and ten percent of the valves are risk significant. The way the ASME plans to tackle this overly-conservative scope for IST components is to use the PRA and plant expert panels to create a two tier IST component categorization scheme. The PRA provides the quantitative risk information and the plant expert panel blends the quantitative and deterministic information to place the IST component into one of two categories: More Safety Significant Component (MSSC) or Less Safety Significant Component (LSSC). With all the pumps and valves in the IST program placed in MSSC or LSSC categories, two different testing strategies will be applied. The testing strategies will be unique for the type of component, such as centrifugal pump, positive displacement pump, MOV, AOV, SOV, SRV, PORV, HOV, CV, and MV. A series of OM Code Cases are being developed to capture this process for a plant to use. One Code Case will be for Component Importance Ranking. The remaining Code Cases will develop the MSSC and LSSC testing strategy for type of component. These Code Cases are planned for publication in early 1997. Later, after some industry application of the Code Cases, the alternative Code Case requirements will gravitate to the ASME OM Code as appendices.

Development of a software for the ASME code qualification of class-I nuclear piping systems

International Nuclear Information System (INIS)

Mishra, Rajesh; Umashankar, C.; Soni, R.S.; Kushwaha, H.S.; Venkat Raj, V.

1999-11-01

In nuclear industry, the designer often comes across the requirements of Class-1 piping systems which need to be qualified for various normal and abnormal loading conditions. In order to have quick design changes and the design reviews at various stages of design, it is quite helpful if a dedicated software is available for the qualification of Class-1 piping systems. BARC has already purchased a piping analysis software CAESAR-II and has used it for the life extension of heavy water plant, Kota. CAESAR-II facilitates the qualification of Class-2 and Class-3 piping systems among others. However, the present version of CAESAR-II does not have the capability to perform stress checks for the ASME Class-1 nuclear piping systems. With this requirement in mind and the prohibitive costs of commercially available software for the Class-1 piping analyses, it was decided to develop a separate software for this class of piping in such a way that the input and output details of the piping from the CAESAR-II software can be made use of. This report principally contains the details regarding development of a software for codal qualification of Class-1 nuclear piping as per ASME code section-III, NB-3600. The entire work was carried out in three phases. The first phase consisted of development of the routines for reading the output files obtained from the CAESAR-II software, and converting them into required format for further processing. In this phase, the nodewise informations available from the CAESAR-II output file were converted into element-wise informations. The second phase was to develop a general subroutine for reading the various input parameters such as diameter, wall thickness, corrosion allowance, bend radius and also to recognize the bend elements based on the bend radius, directly from the input file of CAESAR-II software. The third phase was regarding the incorporation of the required steps for performing the ASME codal checks as per NB-3600 for Class-1 piping

Nupack, the new Asme code for radioactive material transportation packaging containments

International Nuclear Information System (INIS)

Turula, P.

1998-01-01

The American Society of Mechanical Engineers (ASME) has added a new division to the nuclear construction section of its Boiler and Pressure Vessel Code (B and PVC). This Division, commonly referred to as 'Nupack', has been written to provide a consistent set of technical requirements for containment vessels of transportation packagings for high-level radioactive materials. This paper provides an introduction to Nupack, discusses some of its technical provisions, and describes how it can be used the design and construction of packaging components. Nupack's general provisions and design requirements are emphasized, while treatment of materials, fabrication and inspection is left for another paper. Participation in the Nupack development work described in this paper was supported by the U.S. Department of Energy. (authors)

Office-Based Screening for Dementia in Parkinson Disease: The Montreal Parkinson Risk of Dementia Scale in 4 Longitudinal Cohorts.

Science.gov (United States)

Dawson, Benjamin K; Fereshtehnejad, Seyed-Mohammad; Anang, Julius B M; Nomura, Takashi; Rios-Romenets, Silvia; Nakashima, Kenji; Gagnon, Jean-François; Postuma, Ronald B

2018-06-01

Parkinson disease dementia dramatically increases mortality rates, patient expenditures, hospitalization risk, and caregiver burden. Currently, predicting Parkinson disease dementia risk is difficult, particularly in an office-based setting, without extensive biomarker testing. To appraise the predictive validity of the Montreal Parkinson Risk of Dementia Scale, an office-based screening tool consisting of 8 items that are simply assessed. This multicenter study (Montreal, Canada; Tottori, Japan; and Parkinson Progression Markers Initiative sites) used 4 diverse Parkinson disease cohorts with a prospective 4.4-year follow-up. A total of 717 patients with Parkinson disease were recruited between May 2005 and June 2016. Of these, 607 were dementia-free at baseline and followed-up for 1 year or more and so were included. The association of individual baseline scale variables with eventual dementia risk was calculated. Participants were then randomly split into cohorts to investigate weighting and determine the scale's optimal cutoff point. Receiver operating characteristic curves were calculated and correlations with selected biomarkers were investigated. Dementia, as defined by Movement Disorder Society level I criteria. Of the 607 patients (mean [SD] age, 63.4 [10.1]; 376 men [62%]), 70 (11.5%) converted to dementia. All 8 items of the Montreal Parkinson Risk of Dementia Scale independently predicted dementia development at the 5% significance level. The annual conversion rate to dementia in the high-risk group (score, >5) was 14.9% compared with 5.8% in the intermediate group (score, 4-5) and 0.6% in the low-risk group (score, 0-3). The weighting procedure conferred no significant advantage. Overall predictive validity by the area under the receiver operating characteristic curve was 0.877 (95% CI, 0.829-0.924) across all cohorts. A cutoff of 4 or greater yielded a sensitivity of 77.1% (95% CI, 65.6-86.3) and a specificity of 87.2% (95% CI, 84.1-89.9), with a

Chapter 2. Radionuclides in the biosphere

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with role of radionuclides in the biosphere. Chapter consists of next parts: (1) Natural radionuclides in biosphere; (2) Man-made radionuclides in the biosphere; (3) Ecologically important radionuclides; (4) Natural background; (5) Radiotoxicity and (6) Paths of transfer of radionuclides from the source to human

Results from Evaluation of Proposed ASME AG-1 Section FI Metal Media Filters - 13063

Energy Technology Data Exchange (ETDEWEB)

Wilson, John A.; Giffin, Paxton K.; Parsons, Michael S.; Waggoner, Charles A. [Institute for Clean Energy Technology, Mississippi State University, 205 Research Blvd Starkville, MS 39759 (United States)

2013-07-01

High efficiency particulate air (HEPA) filtration technology is commonly used in Department of Energy (DOE) facilities that require control of radioactive particulate matter (PM) emissions due to treatment or management of radioactive materials. Although HEPA technology typically makes use of glass fiber media, metal and ceramic media filters are also capable of filtering efficiencies beyond the required 99.97%. Sintered metal fiber filters are good candidates for use in DOE facilities due to their resistance to corrosive environments and resilience at high temperature and elevated levels of relative humidity. Their strength can protect them from high differential pressure or pressure spikes and allow for back pulse cleaning, extending filter lifetime. Use of these filters has the potential to reduce the cost of filtration in DOE facilities due to life cycle cost savings. ASME AG-1 section FI has not been approved due to a lack of protocols and performance criteria for qualifying section FI filters. The Institute for Clean Energy Technology (ICET) with the aid of the FI project team has developed a Section FI test stand and test plan capable of assisting in the qualification ASME AG-1 section FI filters. Testing done at ICET using the FI test stand evaluates resistance to rated air flow, test aerosol penetration and resistance to heated air of the section FI filters. Data collected during this testing consists of temperature, relative humidity, differential pressure, flow rate, upstream particle concentration, and downstream particle concentration. (authors)

User-inspired design methodology using Affordance Structure Matrix (ASM for construction projects

Directory of Open Access Journals (Sweden)

Maheswari J. Uma

2017-01-01

Full Text Available Traditionally, design phase of construction projects is often performed with incomplete and inaccurate user preferences. This is due to inefficiencies in the methodologies used for capturing the user requirements that can subsequently lead to inconsistencies and result in non-optimised end-result. Iterations and subsequent reworks due to such design inefficiencies is one of the major reasons for unsuccessful project delivery as they impact project performance measures such as time and cost among others. The existing design theories and practice are primarily based on functional requirements. Function-based design deals with design of artifact alone, which may yield favourable or unfavourable consequences with the design artifact. However, incorporating other interactions such as interactions between user & designer is necessary for optimised end-result. Hence, the objective of this research work is to devise a systematic design methodology considering all the three interactions among users, designers and artefacts for improved design efficiency. In this study, it has been attempted to apply the theory of affordances in a case project that involves the design of an offshore facility. A step-by-step methodology for developing Affordance Structure Matrix (ASM, which integrates House of Quality (HOQ and Design Structure Matrix (DSM, is proposed that can effectively capture the user requirements. HOQ is a popular quality management tool for capturing client requirements and DSM is a matrix-based tool that can capture the interdependency among the design entities. The proposed methodology utilises the strengths of both the tools, as DSM compliments HOQ in the process. In this methodology, different affordances such as AUA (Artifact-User-Affordance, AAA (Artifact-Artifact-Affordance and DDA (Designer-Designer-Affordance are captured systematically. Affordance is considered to be user-driven in this context that is in contrast to prevailing design

Indoor air quality, ventilation and energy conservation. Trip report 5th J Cartier Conference, Montreal 1992, FAGO report 92.37.K

NARCIS (Netherlands)

Hensen, J.L.M.

1992-01-01

This trip report serves as a brief description of my visit to the 5th International Jacques Carrier Conference, in Montreal 1992. First some general infonnation about the conference is presented. Then there is a list of contributions. This is followed by a brief indication of my own contribution,

Twenty years of fracture mechanics and flaw evaluation applications in the ASME Nuclear Code

International Nuclear Information System (INIS)

Riccardella, P.C.

1991-01-01

The paper presents a retrospective on the development and applications of fracture mechanics-based toughness requirements and flaw evaluation methodology in Sections III and XI of the ASME Code. Section III developments range from the rules and requirements for thick section Class 1 pressure vessels to thinner section components in other Classes. Section XI applications include flaw acceptance standards and evaluation methodology for various components ranging from pressure vessels to thins section piping of carbon and austenitic steels. The experience gained in operating plant applications of these rules and procedures are also discussed

Evaluation of air quality in arenas on the Island of Montreal : winter 2006-2007; Evaluation de la qualite de l'air dans les arenas de l'Ile de Montreal

Energy Technology Data Exchange (ETDEWEB)

Price, K.; Beausoleil, M.; Lefebvre, L.

2007-03-15

For the past twenty years, cases of nitrogen dioxide (NO{sub 2}) and carbon monoxide (CO) poisoning have been reported in arenas in Quebec. A 1997 evaluation of air quality in 332 arenas in 9 different countries revealed that 40 per cent of arenas worldwide have high concentration of NO{sub 2}. In Quebec, an air quality review at arenas in Montreal drew similar conclusions, that 69 per cent of the arenas have high concentrations of CO and/or NO{sub 2}. In 1997, Quebec's environmental health committee established criteria of 20 ppm for CO, and 0.5 ppm for NO{sub 2} in arenas, in order to ensure that athletes and the public at large do not suffer negative effects related to the presence of combustible gases. This information was distributed to the administrative personnel in arenas in Quebec by means of an awareness and information campaign. Since then, the number of arenas that have met these criteria for air quality in arenas in Montreal has climbed from 31 per cent in 1997 to 83 per cent in 2004. The practices put into action by arena administrators include: 1) regular maintenance of ice surface cleaning machines and other equipment that use fuel, 2) judicious use of ventilation so that gases can be evacuated from the premises, and, 3) periodic measurements of CO and NO{sub 2} during peak usage times such as tournaments. Other means of lowering gas emissions have also shown to be helpful, such as replacement of ice surface cleaning machines with electrical ones, installation of CO and NO{sub 2} detectors close to the rink surface so that ventilation machines could be activated, and the measurement and constant registration of these gases. It was concluded that these measures could help maintain good air quality in arenas. 15 refs., 1 tabs., 1 fig.

Modelling of green microalgal growth and algal storage processes using wastewater resources

DEFF Research Database (Denmark)

Wágner, Dorottya Sarolta; Plósz, Benedek G.; Valverde Pérez, Borja

2017-01-01

Recent research focuses on the recovery of nutrients, water and energy from wastewater. Microalgal cultivation on wastewater resources is considered as a more sustainable means to produce fertilizers or biofuels. Innovative systems that incorporate microalgal cultivation into conventional wastewa...... have been developed according to the activated sludge modelling (ASM) framework to facilitate the integration with existing modelling frameworks in water treatment. This chapter presents in detail the recently developed ASM-A biokinetic green microalgal process model. The model includes...

El Protocolo de Montreal relativo a las sustancias que agotan la capa de ozono (1999) y la enmienda de Beijing. Un análisis de sus contenidos, alcances y sus percusiones presentes.

OpenAIRE

Zúñiga, Francisco Javier

2015-01-01

El presente ensayo consta de cuatro partes, una desarrolla de manera actualizadalos alcances del Protocolo de Montreal ysus enmiendas, la segunda examina los alcances de la Enmienda de Beijing, seguido de un análisis del impacto que hatenido el Protocolo de Montreal para el país. Finalmente se repasa la ejecución del Protocolo y sus enmiendas en nuestropaís y se agregan consideraciones que su implementación ha supuesto en el desarrollo ...

Being a Creative and an Immigrant in Montreal

Directory of Open Access Journals (Sweden)

Diane-Gabrielle Tremblay

2016-09-01

Full Text Available Work on creative careers has focused on the main national populations, while little research has addressed the situation of artists and creators of immigrant origin or different ethnic groups to determine whether they have the same access to work and employment rights. To respond for a call for research on different ethnic groups in the cultural sector, or the ethnic consequences of the individualization of careers, we therefore undertook research on the creative careers of immigrants in Montreal. We were interested in how they emerged as an artist, how they developed their careers, the access and rights they have in terms of support to their career, as McRobbie seems to indicate that ethnicity adds its “own weight to the life chances of those who are attempting to make a living in these fields. We found that these immigrant artists consider their main difficulties to be the lack of social networks, access to various forms of support to compensate for financial risks and difficulties in finding a job. We conclude with a few suggestions: measures to facilitate networking for immigrants, more training and information on government programs, mentoring support, as well as the support from community organizations, associations, and programs.

The Economic Value of the Greater Montreal Blue Network (Quebec, Canada: A Contingent Choice Study Using Real Projects to Estimate Non-Market Aquatic Ecosystem Services Benefits.

Directory of Open Access Journals (Sweden)

Thomas G Poder

Full Text Available This study used a contingent choice method to determine the economic value of improving various ecosystem services (ESs of the Blue Network of Greater Montreal (Quebec, Canada. Three real projects were used and the evaluation focused on six ESs that are related to freshwater aquatic ecosystems: biodiversity, water quality, carbon sequestration, recreational activities, landscape aesthetics and education services. We also estimated the value associated with the superficies of restored sites. We calculated the monetary value that a household would be willing to pay for each additional qualitative or quantitative unit of different ESs, and these marginal values range from $0.11 to $15.39 per household per unit. Thus, under certain assumptions, we determined the monetary values that all Quebec households would allocate to improve each ES in Greater Montreal by one unit. The most valued ES was water quality ($13.5 million, followed by education services ($10.7 million, recreational activities ($8.9 million, landscape aesthetics ($4.1 million, biodiversity ($1.2 million, and carbon sequestration ($0.1 million. Our results ascribe monetary values to improved (or degraded aquatic ecosystems in the Blue Network of Greater Montreal, but can also enhance economic analyses of various aquatic ecosystem restoration and management projects.

The Economic Value of the Greater Montreal Blue Network (Quebec, Canada): A Contingent Choice Study Using Real Projects to Estimate Non-Market Aquatic Ecosystem Services Benefits.

Science.gov (United States)

Poder, Thomas G; Dupras, Jérôme; Fetue Ndefo, Franck; He, Jie

2016-01-01

This study used a contingent choice method to determine the economic value of improving various ecosystem services (ESs) of the Blue Network of Greater Montreal (Quebec, Canada). Three real projects were used and the evaluation focused on six ESs that are related to freshwater aquatic ecosystems: biodiversity, water quality, carbon sequestration, recreational activities, landscape aesthetics and education services. We also estimated the value associated with the superficies of restored sites. We calculated the monetary value that a household would be willing to pay for each additional qualitative or quantitative unit of different ESs, and these marginal values range from $0.11 to $15.39 per household per unit. Thus, under certain assumptions, we determined the monetary values that all Quebec households would allocate to improve each ES in Greater Montreal by one unit. The most valued ES was water quality ($13.5 million), followed by education services ($10.7 million), recreational activities ($8.9 million), landscape aesthetics ($4.1 million), biodiversity ($1.2 million), and carbon sequestration ($0.1 million). Our results ascribe monetary values to improved (or degraded) aquatic ecosystems in the Blue Network of Greater Montreal, but can also enhance economic analyses of various aquatic ecosystem restoration and management projects.

The role of advocacy coalitions in a project implementation process: the example of the planning phase of the At Home/Chez Soi project dealing with homelessness in Montreal.

Science.gov (United States)

Fleury, Marie-Josée; Grenier, Guy; Vallée, Catherine; Hurtubise, Roch; Lévesque, Paul-André

2014-08-01

This study analyzed the planning process (summer 2008 to fall 2009) of a Montreal project that offers housing and community follow-up to homeless people with mental disorders, with or without substance abuse disorders. With the help of the Advocacy Coalition Framework (ACF), advocacy groups that were able to navigate a complex intervention implementation process were identified. In all, 25 people involved in the Montreal At Home/Chez Soi project were surveyed through interviews (n=18) and a discussion group (n=7). Participant observations and documentation (minutes and correspondence) were also used for the analysis. The start-up phase of the At Home/Chez may be broken down into three separate periods qualified respectively as "honeymoon;" "clash of cultures;" and "acceptance & commitment". In each of the planning phases of the At Home/Chez Soi project in Montreal, at least two advocacy coalitions were in confrontation about their specific belief systems concerning solutions to address the recurring homelessness social problem, while a third, more moderate one contributed in rallying most key actors under specified secondary aspects. The study confirms the importance of policy brokers in achieving compromises acceptable to all advocacy coalitions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Modeling climate effects on hip fracture rate by the multivariate GARCH model in Montreal region, Canada

Science.gov (United States)

Modarres, Reza; Ouarda, Taha B. M. J.; Vanasse, Alain; Orzanco, Maria Gabriela; Gosselin, Pierre

2014-07-01

Changes in extreme meteorological variables and the demographic shift towards an older population have made it important to investigate the association of climate variables and hip fracture by advanced methods in order to determine the climate variables that most affect hip fracture incidence. The nonlinear autoregressive moving average with exogenous variable-generalized autoregressive conditional heteroscedasticity (ARMA X-GARCH) and multivariate GARCH (MGARCH) time series approaches were applied to investigate the nonlinear association between hip fracture rate in female and male patients aged 40-74 and 75+ years and climate variables in the period of 1993-2004, in Montreal, Canada. The models describe 50-56 % of daily variation in hip fracture rate and identify snow depth, air temperature, day length and air pressure as the influencing variables on the time-varying mean and variance of the hip fracture rate. The conditional covariance between climate variables and hip fracture rate is increasing exponentially, showing that the effect of climate variables on hip fracture rate is most acute when rates are high and climate conditions are at their worst. In Montreal, climate variables, particularly snow depth and air temperature, appear to be important predictors of hip fracture incidence. The association of climate variables and hip fracture does not seem to change linearly with time, but increases exponentially under harsh climate conditions. The results of this study can be used to provide an adaptive climate-related public health program and ti guide allocation of services for avoiding hip fracture risk.

Effect of phenotype on health care costs in Crohn's disease: A European study using the Montreal classification.

Science.gov (United States)

Odes, Selwyn; Vardi, Hillel; Friger, Michael; Wolters, Frank; Hoie, Ole; Moum, Bjørn; Bernklev, Tomm; Yona, Hagit; Russel, Maurice; Munkholm, Pia; Langholz, Ebbe; Riis, Lene; Politi, Patrizia; Bondini, Paolo; Tsianos, Epameinondas; Katsanos, Kostas; Clofent, Juan; Vermeire, Severine; Freitas, João; Mouzas, Iannis; Limonard, Charles; O'Morain, Colm; Monteiro, Estela; Fornaciari, Giovanni; Vatn, Morten; Stockbrugger, Reinhold

2007-12-01

Crohn's disease (CD) is a chronic inflammation of the gastrointestinal tract associated with life-long high health care costs. We aimed to determine the effect of disease phenotype on cost. Clinical and economic data of a community-based CD cohort with 10-year follow-up were analyzed retrospectively in relation to Montreal classification phenotypes. In 418 patients, mean total costs of health care for the behavior phenotypes were: nonstricturing-nonpenetrating 1690, stricturing 2081, penetrating 3133 and penetrating-with-perianal-fistula 3356 €/patient-phenotype-year (P<0.001), and mean costs of surgical hospitalization 215, 751, 1293 and 1275 €/patient-phenotype-year respectively (P<0.001). Penetrating-with-perianal-fistula patients incurred significantly greater expenses than penetrating patients for total care, diagnosis and drugs, but not surgical hospitalization. Total costs were similar in the location phenotypes: ileum 1893, colon 1748, ileo-colonic 2010 and upper gastrointestinal tract 1758 €/patient-phenotype-year, but surgical hospitalization costs differed significantly, 558, 209, 492 and 542 €/patient-phenotype-year respectively (P<0.001). By multivariate analysis, the behavior phenotype significantly impacted total, medical and surgical hospitalization costs, whereas the location phenotype affected only surgical costs. Younger age at diagnosis predicted greater surgical expenses. Behavior is the dominant phenotype driving health care cost. Use of the Montreal classification permits detection of cost differences caused by perianal fistula.

46 CFR 56.60-1 - Acceptable materials and specifications (replaces 123 and Table 126.1 in ASME B31.1).

Science.gov (United States)

2010-10-01

... Fittings and Other Piping Components—Magnetic Particle Examination Method. SP-55 Quality Standard for Steel... certification, use is limited to applications within heat exchangers. 12 Hydrostatic testing of these fittings... and Seamless Wrought Steel Pipe. ASME B36.19M 2004 Stainless Steel Pipe. American Society for Testing...

Chapter 27. Superconductors

International Nuclear Information System (INIS)

Vavra, O.

2007-01-01

In this chapter author deals with superconductors and superconductivity. Different chemical materials used as high-temperature superconductors are presented. Some applications of superconductivity are presented.

The ASME section XI code, past, present, and future

International Nuclear Information System (INIS)

Anderson, W.F.; Bush, S.H.; Chockie, L.J.

1982-01-01

A little over a decade has passed since the first drafts of the Codes effecting the program of inservice inspections in the United States have been implemented and enforced in operating power plants. During the ensuing years, advantage has been taken of results of the application of the program of inspections and tests. In several instances, the Code has been revised to correct deficiencies, and additional rules have been added to accommodate additional systems and portions of the plant which were deemed to also be important to safety. Additional rules have now been published to recognize the liquid metal cooled reactor systems and the gas cooled reactor systems along with the water cooled reactor systems. While the past and the present can be stated with considerable certainty, opinions of the authors, each of whom is a member of the American Society of Mechanical Engineers (ASME) Code Committee, are advanced as to their plans which will reveal the direction the Code is projected to follow in the future. (author)

Robust boundary detection of left ventricles on ultrasound images using ASM-level set method.

Science.gov (United States)

Zhang, Yaonan; Gao, Yuan; Li, Hong; Teng, Yueyang; Kang, Yan

2015-01-01

Level set method has been widely used in medical image analysis, but it has difficulties when being used in the segmentation of left ventricular (LV) boundaries on echocardiography images because the boundaries are not very distinguish, and the signal-to-noise ratio of echocardiography images is not very high. In this paper, we introduce the Active Shape Model (ASM) into the traditional level set method to enforce shape constraints. It improves the accuracy of boundary detection and makes the evolution more efficient. The experiments conducted on the real cardiac ultrasound image sequences show a positive and promising result.

Global warming potential estimates for the C1-C3 hydrochlorofluorocarbons (HCFCs) included in the Kigali Amendment to the Montreal Protocol

Science.gov (United States)

Papanastasiou, Dimitrios K.; Beltrone, Allison; Marshall, Paul; Burkholder, James B.

2018-05-01

Hydrochlorofluorocarbons (HCFCs) are ozone depleting substances and potent greenhouse gases that are controlled under the Montreal Protocol. However, the majority of the 274 HCFCs included in Annex C of the protocol do not have reported global warming potentials (GWPs) which are used to guide the phaseout of HCFCs and the future phase down of hydrofluorocarbons (HFCs). In this study, GWPs for all C1-C3 HCFCs included in Annex C are reported based on estimated atmospheric lifetimes and theoretical methods used to calculate infrared absorption spectra. Atmospheric lifetimes were estimated from a structure activity relationship (SAR) for OH radical reactivity and estimated O(1D) reactivity and UV photolysis loss processes. The C1-C3 HCFCs display a wide range of lifetimes (0.3 to 62 years) and GWPs (5 to 5330, 100-year time horizon) dependent on their molecular structure and the H-atom content of the individual HCFC. The results from this study provide estimated policy-relevant GWP metrics for the HCFCs included in the Montreal Protocol in the absence of experimentally derived metrics.

Application of the ASME-code-case N 47 to a typical thickwalled HTR-component made of Incoloy 800

International Nuclear Information System (INIS)

Kemter, F.; Schmidt, A.

Several components of the HTR-plant are exposed to temperatures beyond 500 0 C, i.e. within the high-temperature range. The service life of those components is not only limited by fatigue damage but also mainly by creep damage and accumulated inelastic strain. These can be conservatively estimated according to the ASME-Code (high temperature part CC N47) by means of the results of elastic calculations, yet this simplified method to provide evidence often leads to calculated overloads such as the present case of the live steam collector of the steam generator of a HTR. For providing the evidence that the actual loads of the component are within permissible limits, comprehensive inelastic analyses have to be referred to in such a case. The two-dimensional inelastic analysis which is reported here in detail shows that the creep and fatigue failure as well as the inelastic extensions of the live steam collectors accumulated during the service time are below the permissible limit stated in the ASME-Code and failure of those components while used in the reactor can this be excluded. (orig.) [de

Life story chapters, specific memories and the reminiscence bump

DEFF Research Database (Denmark)

Thomsen, Dorthe Kirkegaard; Pillemer, David B.; Ivcevic, Zorana

2011-01-01

Theories of autobiographical memory posit that extended time periods (here termed chapters) and memories are organised hierarchically. If chapters organise memories and guide their recall, then chapters and memories should show similar temporal distributions over the life course. Previous research...... are over-represented at the beginning of chapters. Potential connections between chapters and the cultural life script are also examined. Adult participants first divided their life story into chapters and identified their most positive and most negative chapter. They then recalled a specific memory from...... demonstrates that positive but not negative memories show a reminiscence bump and that memories cluster at the beginning of extended time periods. The current study tested the hypotheses that (1) ages marking the beginning of positive but not negative chapters produce a bump, and that (2) specific memories...

Evaluation of air quality in arenas on the Island of Montreal : winter 2006-2007

International Nuclear Information System (INIS)

Price, K.; Beausoleil, M.; Lefebvre, L.

2007-03-01

For the past twenty years, cases of nitrogen dioxide (NO 2 ) and carbon monoxide (CO) poisoning have been reported in arenas in Quebec. A 1997 evaluation of air quality in 332 arenas in 9 different countries revealed that 40 per cent of arenas worldwide have high concentration of NO 2 . In Quebec, an air quality review at arenas in Montreal drew similar conclusions, that 69 per cent of the arenas have high concentrations of CO and/or NO 2 . In 1997, Quebec's environmental health committee established criteria of 20 ppm for CO, and 0.5 ppm for NO 2 in arenas, in order to ensure that athletes and the public at large do not suffer negative effects related to the presence of combustible gases. This information was distributed to the administrative personnel in arenas in Quebec by means of an awareness and information campaign. Since then, the number of arenas that have met these criteria for air quality in arenas in Montreal has climbed from 31 per cent in 1997 to 83 per cent in 2004. The practices put into action by arena administrators include: 1) regular maintenance of ice surface cleaning machines and other equipment that use fuel, 2) judicious use of ventilation so that gases can be evacuated from the premises, and, 3) periodic measurements of CO and NO 2 during peak usage times such as tournaments. Other means of lowering gas emissions have also shown to be helpful, such as replacement of ice surface cleaning machines with electrical ones, installation of CO and NO 2 detectors close to the rink surface so that ventilation machines could be activated, and the measurement and constant registration of these gases. It was concluded that these measures could help maintain good air quality in arenas. 15 refs., 1 tabs., 1 fig

The Domestic Foodscapes of Young Low-Income Women in Montreal: Cooking Practices in the Context of an Increasingly Processed Food Supply

Science.gov (United States)

Engler-Stringer, Rachel

2010-01-01

Over the course of the past century, the quantity of prepackaged, pre-prepared foods available in the North American context has increased dramatically. This study examines the shifts in food practices that are taking place through an exploration of the day-to-day cooking practices of a group of young, low-income women in Montreal and considers…

The recommissioning of Montreal's Palais des Congres; Le recommissioning du Palais des congres de Montreal

Energy Technology Data Exchange (ETDEWEB)

Poirier, M. [Palais des Congres, Montreal, PQ (Canada); Deschamps, J.F. [Pageau Morel et Associes, Montreal, PQ (Canada)

2006-12-15

An addition was constructed onto the Palais des Congres building in Montreal in 2002. When the energy performance of the newly recommissioned building failed to meet the expectations of the construction contractor, an Energy Savings Commission was created with a mandate was to reduce energy consumption by 25 per cent over a 3 to 5 year time period, representing a savings of $500,000 per year. The objective was to make advantageous changes that would not compromise occupant comfort or interior air quality. The Committee identified areas of possible improvements in the building's heating, ventilating and air conditioning (HVAC) system. Improvements in lighting systems and humidity control were also investigated. The Committee identified necessary upgrades and evaluated the changes in terms of technical feasibility, financial profit and sustainability. The Committee was also responsible for acquiring the authorization needed to proceed with the investment and implement change. This paper listed the energy saving measures along with the associated savings in electricity and natural gas. It also listed the associated reduction in greenhouse gas emissions. The energy saving measures undertaken by the Committee were based on 3 fundamental principles which included turning off equipment that was not being used in different areas of the building; optimizing the energy use of equipment; and, replacing or modifying inefficient equipment. In November 2005, the Palais des Congres hosted the Energy Efficiency Week, during which time it made use of CANMET's Diagnostic Agent for Building Operators (DABO) software package to achieve energy savings. A program aimed at training employees in energy efficiency was also implemented and feedback on key issues was acquired. Hydro-Quebec also contributed $25,000 towards the energy analysis performed by the Committee. The objective of saving $500,000 in energy costs over a 3 to 5 year period was met. 3 tabs., 1 fig.

106-17 Telemetry Standards Chapter 1

Science.gov (United States)

2017-07-01

Telemetry Standards, RCC Standard 106-17 Chapter 1, July 2017 1-1 CHAPTER 1 Introduction The Telemetry Standards address the here-to-date...for Federal Radio Frequency Management . Copies of that manual may be obtained from: Executive Secretary, Interdepartmental Radio Advisory Committee

Effect of beta2-adrenoceptor agonists and other cAMP-elevating agents on inflammatory gene expression in human ASM cells: a role for protein kinase A.

Science.gov (United States)

Kaur, Manminder; Holden, Neil S; Wilson, Sylvia M; Sukkar, Maria B; Chung, Kian Fan; Barnes, Peter J; Newton, Robert; Giembycz, Mark A

2008-09-01

In diseases such as asthma, airway smooth muscle (ASM) cells play a synthetic role by secreting inflammatory mediators such as granulocyte-macrophage colony-stimulating factor (GM-CSF), IL-6, or IL-8 and by expressing surface adhesion molecules, including ICAM-1. In the present study, PGE(2), forskolin, and short-acting (salbutamol) and long-acting (salmeterol and formoterol) beta(2)-adrenoceptor agonists reduced the expression of ICAM-1 and the release of GM-CSF evoked by IL-1beta in ASM cells. IL-1beta-induced IL-8 release was also repressed by PGE(2) and forskolin, whereas the beta(2)-adrenoceptor agonists were ineffective. In each case, repression of these inflammatory indexes was prevented by adenoviral overexpression of PKIalpha, a highly selective PKA inhibitor. These data indicate a PKA-dependent mechanism of repression and suggest that agents that elevate intracellular cAMP, and thereby activate PKA, may have a widespread anti-inflammatory effect in ASM cells. Since ICAM-1 and GM-CSF are highly NF-kappaB-dependent genes, we used an adenoviral-delivered NF-kappaB-dependent luciferase reporter to examine the effects of forskolin and the beta(2)-adrenoceptor agonists on NF-kappaB activation. There was no effect on luciferase activity measured in the presence of forskolin or beta(2)-adrenoceptor agonists. This finding is consistent with the observation that IL-1beta-induced expression of IL-6, a known NF-kappaB-dependent gene in ASM, was also unaffected by beta(2)-adrenoceptor agonists, forskolin, PGE(2), 8-bromo-cAMP, or rolipram. Collectively, these results indicate that repression of IL-1beta-induced ICAM-1 expression and GM-CSF release by cAMP-elevating agents, including beta(2)-adrenoceptor agonists, may not occur through a generic effect on NF-kappaB.

Chapter 08: Comments on, and additional information for, wood identification

Science.gov (United States)

Alex C. Wiedenhoeft

2011-01-01

This manual has described the theory of identification (Chapter 1), the botanical basis of wood structure (Chapter 2), the use of a hand lens (Chapter 3), how to use cutting tools to prepare wood for observation with a lens (Chapter 4), and the characters used in hand lens wood identification (Chapter 5) before leading you through an identification key (Chapter 6) and...

ASME stress linearization and classification - a discussion based on a case study

International Nuclear Information System (INIS)

Miranda, Carlos A. de J.; Faloppa, Altair A.; Mattar Neto, Miguel; Fainer, Gerson

2011-01-01

The ASME code, specially in its Nuclear Division (Subsection NB - Class I Components), gives some recommendations to the structural analyst on how to perform the verifications required to prove the design as good as the by-analysis prevented failures modes. Each of these failure modes has specific stress limits which are established based on simple but conservative hypothesis like the material perfectly plastic behavior and the shell theory with its typical membrane and bending stresses with linear distribution along the thickness. Other detail to keep in mind is the code distinction between primary and secondary stresses (respectively, stress that came due to equilibrium and due to displacement compatibility). In general, the numerical models used in the analyses are developed with plane or 3D solid elements and due this fact no direct comparison with the code limits can be done and, besides that, the programs do not distinguish between primary and secondary stresses. Mostly, the later are produced due to the temperature variation but they also appear near discontinuities. Sometimes, this classification is not so clear or direct. To perform the required ASME Code verifications the analyst should obtain the membrane and bending stresses from the plane or 3-D model which is called stress linearization and, also, should classify them as primary and secondary. (The excess between the maximum stress at a point and the sum of these linearized values is called peak stress and is included in the fatigue verification.) This task, most of the time is not a simple one due to the nature of the involved load and/or the complex geometry under analysis. In fact, there are several studies discussing on how to perform these stress classification and linearization. The present paper shows a discussion on how to perform these verifications based on a generic geometry found in many plants, from petrochemical to nuclear, which emphasizes some of theses issues. (author)

ASME stress linearization and classification - a discussion based on a case study

Energy Technology Data Exchange (ETDEWEB)

Miranda, Carlos A. de J.; Faloppa, Altair A.; Mattar Neto, Miguel; Fainer, Gerson, E-mail: cmiranda@ipen.b, E-mail: afaloppa@ipen.b, E-mail: mmattar@ipen.b, E-mail: gfainer@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

The ASME code, specially in its Nuclear Division (Subsection NB - Class I Components), gives some recommendations to the structural analyst on how to perform the verifications required to prove the design as good as the by-analysis prevented failures modes. Each of these failure modes has specific stress limits which are established based on simple but conservative hypothesis like the material perfectly plastic behavior and the shell theory with its typical membrane and bending stresses with linear distribution along the thickness. Other detail to keep in mind is the code distinction between primary and secondary stresses (respectively, stress that came due to equilibrium and due to displacement compatibility). In general, the numerical models used in the analyses are developed with plane or 3D solid elements and due this fact no direct comparison with the code limits can be done and, besides that, the programs do not distinguish between primary and secondary stresses. Mostly, the later are produced due to the temperature variation but they also appear near discontinuities. Sometimes, this classification is not so clear or direct. To perform the required ASME Code verifications the analyst should obtain the membrane and bending stresses from the plane or 3-D model which is called stress linearization and, also, should classify them as primary and secondary. (The excess between the maximum stress at a point and the sum of these linearized values is called peak stress and is included in the fatigue verification.) This task, most of the time is not a simple one due to the nature of the involved load and/or the complex geometry under analysis. In fact, there are several studies discussing on how to perform these stress classification and linearization. The present paper shows a discussion on how to perform these verifications based on a generic geometry found in many plants, from petrochemical to nuclear, which emphasizes some of theses issues. (author)

May 2013 Council of Chapter Representatives Notes

Directory of Open Access Journals (Sweden)

Robbins RA

2013-05-01

Full Text Available No abstract available. Article truncated at 150 words. The Council of Chapter Representatives met in conjunction with the ATS meeting in Philadelphia on May 18, 2012.Roll Call. The meeting was called to order at 11 AM. Representatives from Arizona, California, DC Metro, Louisiana, Michigan, New Mexico, New York, Oregon, and Rhode Island were in attendance, and by telephone from Washington.Chapter Updates. Information on chapter activities and a chapter brochure. There are currently 19 active chapters. Most are having annual meetings. Advocacy. Gary Ewart from ATS Government Relations gave a presentation on Washington activities. Highlights included activities on the SGR, a number of air pollution regulations and a letter campaign advocating regulation of cigars. ATS President 2013-14-vision for the coming year. Patrician Finn gave a summary of what she hopes to accomplish over the next year. The theme of her presidency will be health equality. ATS Executive Director-update. Steve Crane gave a positive presentation on the …

The Montreal General Hospital Pain Centre (1974-2000: The Contributions of Ronald Melzack

Directory of Open Access Journals (Sweden)

Mary Ellen Jeans

2000-01-01

Full Text Available This paper chronicles the development of the Montreal General Hospital Pain Centre from its inception in 1974 to the present. Highlighted in particular are the contributions of Ronald Melzack to this history. Data for the article arose, in the main, from an interview with Dr Melzack carried out earlier in the year. Discussions with former and present members of the pain centre team, including former graduate students, provided additional information. The article begins with a recounting of those individuals and events that inspired Ron early in his 'pain career' to pursue his dream of a multidisciplinary pain centre, the first of its kind in Canada. The forces that helped shape the development of this centre and the challenges that had to be overcome are described.

Applicability of ASME sections III and VIII and of B31.1 and B31.3 to DOE facilities

International Nuclear Information System (INIS)

Antaki, G.A.

1993-01-01

DOE order 6430.1A Section 1300-3.2 requires that open-quotes....safety class items shall be designed to the ASME Boiler and Pressure Vessel Code (ASME Section III) or to other comparable safety-related codes and standards...close quotes. This requirement raises a host of technical and practical questions which, to the author's knowledge, have not been fully addressed in the past. This paper attempts to cover the following essential points, in order: Evolution of industry reference codes, Code scope, Safety margins, Logistical considerations, Costs, Backfit considerations. These points are covered in the context of a reference safety class piping and vessel system at a DOE facility which processes radioactive fluids, and which this paper calls the open-quotes reference DOE nuclear facilityclose quotes. In the conclusion, the author proposes three alternatives for code applicability which are ranked technically as open-quotes goodclose quotes, open-quotes closer to 6430.1Aclose quotes and open-quotes closest to 6430.1Aclose quotes. It is however questionable whether the alternatives which are labeled open-quotes closerclose quotes and open-quotes closestclose quotes are practically viable, as will be discussed

Using Kolb's Experiential Learning Cycle in Chapter Presentations

Science.gov (United States)

Stokes-Eley, Stephanie

2007-01-01

Student-led chapter presentations provide an excellent opportunity for instructors to evaluate a student's comprehension of the assigned chapter, as well as the student's ability to present and convey information in a public forum. Although several instructors realize the benefits of requiring students to complete chapter presentations either as…

News from the Library: A new key reference work for the engineer: ASME's Boiler and Pressure Vessel Code at the CERN Library

CERN Multimedia

CERN Library

2011-01-01

The Library is aiming at offering a range of constantly updated reference books, to cover all areas of CERN activity. A recent addition to our collections strengthens our offer in the Engineering field.   The CERN Library now holds a copy of the complete ASME Boiler and Pressure Vessel Code, 2010 edition. This code establishes rules of safety governing the design, fabrication, and inspection of boilers and pressure vessels, and nuclear power plant components during construction. This document is considered worldwide as a reference for mechanical design and is therefore important for the CERN community. The Code published by ASME (American Society of Mechanical Engineers) is kept current by the Boiler and Pressure Committee, a volunteer group of more than 950 engineers worldwide. The Committee meets regularly to consider requests for interpretations, revision, and to develop new rules. The CERN Library receives updates and includes them in the volumes until the next edition, which is expected to ...

Individual- and area-level disparities in access to the road network, subway system and a public bicycle share program on the Island of Montreal, Canada.

Science.gov (United States)

Fuller, Daniel; Gauvin, Lise; Kestens, Yan

2013-02-01

Few studies have examined potential disparities in access to transportation infrastructures, an important determinant of population health. To examine individual- and area-level disparities in access to the road network, public transportation system, and a public bicycle share program in Montreal, Canada. Examining associations between sociodemographic variables and access to the road network, public transportation system, and a public bicycle share program, 6,495 adult respondents (mean age, 48.7 years; 59.0 % female) nested in 33 areas were included in a multilevel analysis. Individuals with lower incomes lived significantly closer to public transportation and the bicycle share program. At the area level, the interaction between low-education and low-income neighborhoods showed that these areas were significantly closer to public transportation and the bicycle share program controlling for individual and urbanicity variables. More deprived areas of the Island of Montreal have better access to transportation infrastructure than less-deprived areas.

Seleucid, Demotic and Mediterranean mathematics versus Chapters VIII and IX of the Nine Chapters: accidental or significant similarities?

DEFF Research Database (Denmark)

Høyrup, Jens

Similarities of geometrical diagrams and arithmetical structures of problems have often been taken as evidence of transmission of mathematical knowledge or techniques between China and “the West”. Confronting on one hand some problems from Chapter VIII of the Nine Chapters with comparable problems...... known from Ancient Greek sources, on the other a Seleucid collection of problems about rectangles with a subset of the triangle problems from Chapter IX, it is concluded, (1) that transmission of some arithmetical riddles without method – not “from Greece” but from a transnational community of traders...

New methods of analysis of materials strength data for the ASME Boiler and Pressure Vessel Code

International Nuclear Information System (INIS)

Booker, M.K.; Booker, B.L.P.

1980-01-01

Tensile and creep data of the type used to establish allowable stress levels for the ASME Boiler and Pressure Vessel Code have been examined for type 321H stainless steel. Both inhomogeneous, unbalanced data sets and well-planned homogeneous data sets have been examined. Data have been analyzed by implementing standard manual techniques on a modern digital computer. In addition, more sophisticated techniques, practical only through the use of the computer, have been applied. The result clearly demonstrates the efficacy of computerized techniques for these types of analyses

Application of the ASME code in designing containment vessels for packages used to transport radioactive materials

International Nuclear Information System (INIS)

Raske, D.T.; Wang, Z.

1992-01-01

The primary concern governing the design of shipping packages containing radioactive materials is public safety during transport. When these shipments are within the regulatory jurisdiction of the US Department of Energy, the recommended design criterion for the primary containment vessel is either Section III or Section VIII, Division 1, of the ASME Boiler and Pressure Vessel Code, depending on the activity of the contents. The objective of this paper is to discuss the design of a prototypic containment vessel representative of a packaging for the transport of high-level radioactive material

Chapter 9: Electronics

International Nuclear Information System (INIS)

Grupen, Claus; Shwartz, Boris A.

2006-01-01

Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques

‘THE BIGGEST MISTAKE GOD EVER MADE WAS TO CREATE JUNKIES’: UNSAFE INJECTION PRACTICES, HEALTH CARE DISCRIMINATION AND OVERDOSE DEATHS IN MONTREAL, CANADA

Directory of Open Access Journals (Sweden)

Jozaghi, Ehsan

2013-01-01

Full Text Available Despite the existence of prevention programmes in Montreal, Canada, injection drug users (IDUs continue to share their injection drug equipment. This practice has led to an increase in the incidences of HIV and Hepatitis C (HCV among IDUs since 2003. The present study was conducted to explore factors contributing to the increased risks of this morbidity. Semi-structured qualitative interviews were conducted as drug users were actively involved in their routine activities. The participants’ narratives indicate that IDUs in Montreal are involved in risky injection behaviour that increases HIV, HCV and bacterial transmission. Moreover, IDUs in Montreal are at an increased risk of overdose and death when they are forced to inject in public washrooms or alleys. In addition, many IDUs have placed the general public at risk by discarding their used needles in public parks, sidewalks and public washrooms. Furthermore, many IDUs in Montreal have faced discrimination and are refused treatment by the health care system. Micro- environmental factors, such as a paucity of safe injection sites, inaccessibility of injection equipment and discrimination all seem to be contributing factors in recent increases in HIV and HCV in Montreal.Malgré les programmes de prévention qui existent à Montréal, Canada, les utilisateurs de drogues injectables (UDI continuent de partager leurs seringues. Cette pratique a mené à une augmentation de l’incidence du virus de l’immunodéficience humaine (VIH et du virus de l’hépatite C (VHC parmi les UDI depuis 2003. La présente étude a été menée afin d’examiner les facteurs qui contribuent à l’augmentation des risques de cette morbidité. Des entretiens qualitatifs semi-directifs ont été réalisés pendant que les utilisateurs faisaient usage de drogues. Les commentaires recueillis auprès des participants ont confirmé que les UDI de Montréal adoptent des comportements d’injection qui augmentent les

Avaliação do programa de atenção a crianças asmáticas acompanhadas nas unidades de saúde do Município do Embu, São Paulo, no período de 1988 a 1993

Directory of Open Access Journals (Sweden)

Renato Nabas Ventura

Full Text Available Com o objetivo de avaliar o desempenho do Programa de Atenção a Crianças Portadoras de "Chiado no Peito", no Município de Embu, São Paulo, foram estudadas 434 crianças e adolescentes de zero a 14 anos, admitidas no programa de maio/88 a julho/93. Mais de 90% desses pacientes nunca haviam sido acompanhados por esse motivo em serviço médico. Apenas 6,2% foram encaminhados a outros serviços de referência durante o acompanhamento no programa. Segundo critérios clínicos, os pacientes foram classificados em: bebê chiador (21,8%, asmáticos leves (41,7%, asmáticos moderados (28,3%, asmáticos graves (7,6% e outros (0,4%. Ao se analisar o comportamento dos asmáticos moderados e graves acompanhados por mais de um ano, observou-se melhora clínica nesses dois grupos, e o que influenciou positivamente esse fato foi a maior aderência ao uso da medicação. O número de exacerbações decresceu entre os asmáticos graves, após um ano de acompanhamento regular, embora durante os 12 meses analisados tenha havido um consumo praticamente constante de medicação broncodilatadora. O abandono ocorreu em 53,2% das crianças matriculadas, principalmente nos primeiros seis meses de acompanhamento, sendo significantemente mais freqüente entre os asmáticos moderados. Concluímos que as crianças com maior aderência ao programa se beneficiaram do mesmo, apesar das dificuldades e da falta de alguns recursos medicamentosos atualmente existentes.

Avaliação do programa de atenção a crianças asmáticas acompanhadas nas unidades de saúde do Município do Embu, São Paulo, no período de 1988 a 1993

Directory of Open Access Journals (Sweden)

Ventura Renato Nabas

1998-01-01

Full Text Available Com o objetivo de avaliar o desempenho do Programa de Atenção a Crianças Portadoras de "Chiado no Peito", no Município de Embu, São Paulo, foram estudadas 434 crianças e adolescentes de zero a 14 anos, admitidas no programa de maio/88 a julho/93. Mais de 90% desses pacientes nunca haviam sido acompanhados por esse motivo em serviço médico. Apenas 6,2% foram encaminhados a outros serviços de referência durante o acompanhamento no programa. Segundo critérios clínicos, os pacientes foram classificados em: bebê chiador (21,8%, asmáticos leves (41,7%, asmáticos moderados (28,3%, asmáticos graves (7,6% e outros (0,4%. Ao se analisar o comportamento dos asmáticos moderados e graves acompanhados por mais de um ano, observou-se melhora clínica nesses dois grupos, e o que influenciou positivamente esse fato foi a maior aderência ao uso da medicação. O número de exacerbações decresceu entre os asmáticos graves, após um ano de acompanhamento regular, embora durante os 12 meses analisados tenha havido um consumo praticamente constante de medicação broncodilatadora. O abandono ocorreu em 53,2% das crianças matriculadas, principalmente nos primeiros seis meses de acompanhamento, sendo significantemente mais freqüente entre os asmáticos moderados. Concluímos que as crianças com maior aderência ao programa se beneficiaram do mesmo, apesar das dificuldades e da falta de alguns recursos medicamentosos atualmente existentes.

Effects of Induction Heat Bending Process on Microstructure and Corrosion Properties of ASME SA312 Gr.TP304 Stainless Steel Pipes

International Nuclear Information System (INIS)

Kim, Nam In; Kim, Young Sik; Kim, Kyung Soo; Chang, Hyun Young; Park, Heung Bae; Sung, Gi Ho; Sung, Gi Ho

2015-01-01

The usage of bending products recently have increased since many industries such as automobile, aerospace, shipbuilding, and chemical plants need the application of pipings. Bending process is one of the inevitable steps to fabricate the facilities. Induction heat bending is composed of compressive bending process by local heating and cooling. This work focused on the effect of induction heat bending process on the properties of ASME SA312 Gr. TP304 stainless steel pipes. Tests were performed for base metal and bended area including extrados, intrados, crown up, and down parts. Microstructure was analyzed using an optical microscope and SEM. In order to determine intergranular corrosion resistance, Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR) test and ASTM A262 practice A and C tests were done. Every specimen revealed non-metallic inclusion free under the criteria of 1.5i of the standard and the induction heat bending process did not affect the non-metallic inclusion in the alloys. Also, all the bended specimens had finer grain size than ASTM grain size number 5 corresponding to the grain sizes of the base metal and thus the grain size of the pipe bended by induction heat bending process is acceptable. Hardness of transition start, bend, and transition end areas of ASME SA312 TP304 stainless steel was a little higher than that of base metal. Intergranular corrosion behavior was determined by ASTM A262 practice A and C and DL-EPR test, and respectively step structure, corrosion rate under 0.3 mm/y, and Degree of Sensitization (DOS) of 0.001 - 0.075 % were obtained. That is, the induction heat bending process didn't affect the intergranular corrosion behavior of ASME SA312 TP304 stainless steel

Assessment of crack-like flaws - Comparison of procedures in BS 7910, API 579-1/ASME FFS-1, RSE-M AND FITNET

International Nuclear Information System (INIS)

Chaudouet, A.

2007-01-01

Among all Fitness For Service Codes enabling to assess flaws in metallic structures and to evaluate their remaining life, new editions of the most important ones at the international level have been issued recently. The latest edition of BS 7910 in United Kingdom has been released in October 2005. In the USA, API and ASME have edited a new standard in 2007, API579-1/ASME FFS-1, dedicated to pressure equipment. In France, the rules concerning the of Light Water Reactors, RSE-M, have been updated in 2005. Finally, in Europe, the FITNET network is writing a document based on BS 7910 but extended with the most recent results in this domain. Rules given in these documents to assess crack-like flaws with respect to fracture and fatigue propagation are presented. They are compared in order to point out the most interesting aspects of each ones and to identify those which could be generalized. An example assessed with the above mentioned 'Codes' enlightens the differences in the results with respect to the 'Code' used. (author) [fr

Aeração nasal em crianças asmáticas Nasal ventilation in asthmatics children

Directory of Open Access Journals (Sweden)

Daniele Andrade da Cunha

2011-10-01

Full Text Available OBJETIVO: identificar a presença de sinais de alterações na expiração de crianças asmáticas. MÉTODO: este estudo foi realizado com 30 crianças com idades entre 6 e 10 anos de ambos os sexos com diagnóstico clínico de asma confirmado pelo prontuário médico e 30 crianças não asmáticas também de ambos os sexos na mesma faixa etária. Foi avaliada a aeração nasal com o espelho milimetrado de Altmann, sendo mensurado o escape de ar nasal objetivando a verificação da saída uni ou bilateral do ar e a relação de simetria entre a narina direita e a esquerda. As imagens foram importadas para o computador por meio do scanner HP da série Scanjet 2400. A análise foi realizada no software Scion Image for Windows (Alpha 4.0.3.2. Para análise das variáveis quantitativas entre grupos foi aplicado o teste t-student e para a análise intragrupos foi aplicado o teste t-Student pareado.Todas as conclusões foram tomadas ao nível de significância de 5%, sendo usados o Excel 2000 e o SPSS v8.0, para as análises. RESULTADOS: não foram encontradas diferenças estatisticamente significantes entre as crianças asmáticas e não-ásmáticas, acerca das mensurações quanto à área total e quanto às áreas das narinas direita e esquerda. CONCLUSÃO: não foi identificada a presença de sinais de alterações na expiração de crianças asmáticas, desta forma, faz-se necessário um estudo mais específico das funções nasal e pulmonar.PURPOSE: to identify the symptoms of changes in the exhalation of asthmatic children. METHOD: this study was conducted with 30 children from 6 to 10 year-old, of both genders and with asthma clinical diagnosis confirmed by medical records and 30 non-asthmatic children from 6 to 10 year-old, of both genders, and with same age. We evaluated the nasal ventilation with Altmann millimeter nasal mirror measuring the nasal air escape in order to check their unilateral or bilateral air output and the relation of

El programa de prevención de Montreal: lecciones para Colombia

Directory of Open Access Journals (Sweden)

Enrique Chaux

2005-08-01

Full Text Available The Montreal Prevention Program has demonstrated a mayor world success in prevention of delinquency and violence. The most aggressive students of second and third grade participated in an intervention that had two components. First, several activities were done to develop social abilities and competencies. These activities occurred in small groups with one or two aggressive boys and other prosocial kids. Second, the families of the aggressive boys were visited several times in a two year period in order to help them develop child rearing practices such as constructive management of conflicts and crisis, handling of rewards, and monitoring the child behavior. Assessment demonstrated that the program decreased the delinquent and aggressive behavior, and also some risk behaviors such as drug use, early sexual activities, gang membership and school dropout. Some of these effects are still measurable in adulthood, almost 15 years after participating in the program. The article presents a detailed analysis of this experience, and also eight lessons for Colombia, among them, that the prevention is rewarding, especially when done early in life.

Psychic centrality: reflections on two psychohistoriographic cultural therapy workshops in Montreal.

Science.gov (United States)

Hickling, Frederick W; Guzder, Jaswant; Robertson-Hickling, Hilary; Snow, Stephen; Kirmayer, Laurence J

2010-02-01

The use of psychohistoriographic cultural therapy (PCT) developed in Jamaica is described in the context of two workshops in Montreal. PCT is a form of group intervention that seeks to elicit and clarify the "psychic centrality" of a group. Psychic centrality refers to a sense of psychological containment or organization of diverse individual points of view through creating a historical map of collective experience. In PCT, this collective map is constructed and techniques borrowed from creative arts therapies are used to develop a performance. This performance provides additional containment and fosters a group process that can contain collective conflicts. The performance can also be used to engage an audience, working to contain conflict while representing diverse perspectives within the group. Factors that may contribute to the effectiveness of PCT and those that may derail the process are identified through the systematic comparison of the two workshops. PCT was demonstrated to cross successfully from a Third to a First World culture, and established potential as a method to facilitate group conflict resolution and for the promotion of pluralistic civil societies.

ASME power test code ptc 4.1 for steam generators; Codigo de pruebas de potencia ASME ptc 4.1 para generadores de vapor

Energy Technology Data Exchange (ETDEWEB)

Plauchu Alcantara, Jorge Alberto [Plauchu Consultores, Morelia, Michoacan (Mexico)

2001-07-01

This presentation is oriented towards those who in this subject have experience in the design and equipment specification, plant projects, factory and field testing, operation or result analyses. An important fraction of the national energy supply, approximately 13%, is applied to the steam generation in the different aspects of the industrial activity, in the electrical industry of public service and in the commercial and services sector. The development of the national programs of energy efficiency verifies this when dedicating to this use of the energy important projects, some of them with support of the USAID. The measurement of the energy utilization or the efficiency of steam generators (or boilers) is made applying some procedure agreed by the parts and the one of greater acceptance and best known in Mexico and internationally is the ASME Power Test Code PTC 4.1 for Steam Generators. The purpose and formality in the determination of efficiency and of steam generation capacity behavior, thermal basic regime or fulfillment of guarantees, radically changes the exigencies of strict attachment to the PTC 4.1 This definition will determine the importance of the test method selected, the deviations and convened exceptions, the influence of the precision and the measurement errors, the consideration of auxiliary equipment, etc. An interpretation or incorrect application of the Test Code has lead and will lead to results and nonreliable decisions. [Spanish] Esta exposicion se orienta a quienes en este tema cuenta con experiencia en diseno y especificacion de equipo, proyecto de planta, pruebas en fabrica y campo, operacion o analisis de resultados. Una fraccion importante de la oferta nacional de energia, 13% aproximadamente, se aplica a la generacion de vapor en diferentes giros de actividad industrial, en la industria electrica, de servicio publico y en el sector de servicios y comercial. El desarrollo de los programas nacionales de eficiencia energetica comprueba

Fundamentals of Dosimetry. Chapter 3

Energy Technology Data Exchange (ETDEWEB)

Yoshimura, E. M. [Universidade de São Paulo, São Paulo (Brazil)

2014-09-15

Determination of the energy imparted to matter by radiation is the subject of dosimetry. The energy deposited as radiation interacts with atoms of the material, as seen in the previous chapter. The imparted energy is responsible for the effects that radiation causes in matter, for instance, a rise in temperature, or chemical or physical changes in the material properties. Several of the changes produced in matter by radiation are proportional to the absorbed dose, giving rise to the possibility of using the material as the sensitive part of a dosimeter. Also, the biological effects of radiation depend on the absorbed dose. A set of quantities related to the radiation field is also defined within the scope of dosimetry. It will be shown in this chapter that, under special conditions, there are simple relations between dosimetric and field description quantities. Thus, the framework of dosimetry is the set of physical and operational quantities that are studied in this chapter.

Soundscape studies in Montreal's Biodome: using enclosed ecosystems to explain biodiversity to the public

Science.gov (United States)

Fisher Favret, K. E.

2016-02-01

The Biodome in Montreal is a unique public museum with over 750 species organized into five different ecosystems. We spent several weeks obtaining soundscapes from three of these: Gulf of St. Lawrence, Labrador Coast, and Sub-Antarctic Islands. The idea was to leverage the accessibility and known biodiversity of these mesocosms to calibrate instruments, evaluate methods for assessing biodiversity, and educate people ranging from the penguin keeper to the general public about soundscape ecology and biodiversity assessments. The Gulf of St. Lawrence exhibit has hundreds of fish that belong to 20 species swimming in 2.5 million gallons of seawater, with seabirds and invertebrates nearby. The Sub-Antarctic Islands exhibit, by contrast, has four species of penguins. As part of Montreal's Space for Life program, there is a searchable index of the species available to the public: http://espacepourlavie.ca/en/fauna-and-flora-biodome.The emerging field of soundscape ecology offers a new approach for effectively monitoring changes in sounds generated by communities ranging from urban centers to oceans. The entropy-based approach pioneered by Sueur et al., (2008) characterizes acoustic spectrograms based on the spectral space-filling properties of the sound producers. By calculating the complexity of the acoustic environment, we can detect cycles over various time scales. Disturbed systems can be detected by changes in the timing and frequency of sounds filling various "niches" in the soundscape that might act as early warnings of changes induced on scales from single events to climate shifts. These changes range from presence or absence of vocalizations by individual species, to changes in the higher order statistics of the daily sound structures that include sounds with physical, biological, and human origins. Here we show what we have learned so far about comparing enclosed ecosystems to the real world outside, and some of the challenges and rewards of using soundscape

Chapter 6: Selenium Toxicity to Aquatic Organisms

Science.gov (United States)

This chapter addresses the characteristics and nature of organic selenium (Se) toxicity to aquatic organisms, based on the most current state of scientific knowledge. As such, the information contained in this chapter relates to the 'toxicity assessment' phase of aquatic ecologi...

Chapter 5: Training

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter 5 presents the 1) initial training; 2) periodic training, which includes: a) periodic training for employees at lower levels of the hierarchy than that of the operator; b) period training for operators; 3) operator training; 4) record of training; 5) safety culture.

L'evaluation du francais des jeunes Anglo-montrealais par leurs pairs francophones (Evaluation of the French of Young Montreal Anglophones by Their Francophone Peers).

Science.gov (United States)

Thibault, Pierrette; Sankoff, Gillian

1999-01-01

Analyzes the reactions of francophone Montrealers (n=116) to the recorded speech of English speakers using French. Particular focus is on finding out which linguistic traits of speech triggered the judgments on the speakers' competence and to what extent they met the judges expectations with regard to their job suitability. (Author/VWL)

[Rape by 2 assaillants and gang rape in Montreal].

Science.gov (United States)

Lamontagne, Y; Boyer, R; Lamontagne, C; Giroux, J

1984-11-01

A survey was conducted in 230 cases of rape and rape attempts heard in the Judicial District of Montreal between January 1975 and May 1978. Data were compiled from the 30 assaults including two or more assaillants. Results show that in cases of rape committed by two men the aggressors are older than gang rapists, meet the victim mainly in her flat or in a bar, and rape her in her own home, in a car or a hotel. In these cases, voyeurism seems to be an important factor since, most of the time, rape is committed by only one of the two aggressors. On the other hand, gang rapists are younger, meet the victim in public places, on the street or when she is hitch-hiking and attack her in one of the aggressors' house, in public places or on the street. Exhibitionism seems more present in this group of rapists. For both groups the victims are mainly single, younger than the aggressors and have diverse occupations. Finally, regarding the legal outcome half of the subjects were liberated or acquitted in both groups. Rape committed by two men had never been studied or compared with gang rape up until now. Results of this survey show dynamic and demographic differences between these two groups of sexual delinquents.

Technical Review on Fitness-for-Service for Buried Pipe by ASME Code Case N-806

International Nuclear Information System (INIS)

Park, Sang Kyu; Lee, Yo Seop; So, Il Su; Lim, Bu Taek

2012-01-01

Fitness-for-Service is a useful technology to determine replacement timing, next inspection timing or in-service when nuclear power plant's buried pipes are damaged. If is possible for buried pipes to be aged by material loss, cracks and occlusion as operating time goes by. Therefore Fitness-for-Service technology for buried pipe is useful for plant industry to perform replacement and repair. Fitness-for-Service for buried pipe is studied in terms of existing code and standard for Fitness-for-Service and a current developing code case. Fitness-for-Service for buried pipe was performed according to Code Case N-806 developed by ASME (American Society of Mechanical Engineers)

Various chapter styles for the memoir class

DEFF Research Database (Denmark)

Madsen, Lars

2008-01-01

Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded.......Document showcasing various chapter title page designs either included in the LaTeX memoir class or is easily manually coded....

Flanged joints with contact outside the bolt circle: ASME Part B design rules

International Nuclear Information System (INIS)

Rodabaugh, E.C.; Moore, S.E.

1976-05-01

The ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, gives rules which are subdivided into ''Part A'' and ''Part B''. Part A covers flanged joints where contact between flanges occurs through a gasket located inside the bolt holes. Part B covers flanged joints with contact outside the bolt holes. This report (a) summarizes the theory for Part B flanged joints, (b) presents examples which show the significant differences between Part A flanged joints and Part B flanged joints, (c) presents the available test data relevant to the characteristics of Part B flanged joints, (d) gives listings of two computer programs which can be used to evaluate the characteristics of Part B flanged joints, and (e) gives recommendations for Code revisions and other aspects of Part B flanged-joint design

IE Information Notice No. 85-33: Undersized nozzle-to-shell welded joints in tanks and heat exchangers constructed under the rules of the ASME boiler and vessel code

International Nuclear Information System (INIS)

Jordan, E.L.

1993-01-01

During the CAT (Construction Appraisal Team) inspections conducted at the River Bend, Shearon Harris, and Braidwood nuclear power projects, the NRC identified undersized nozzle-to-shell welded joints (ASME Category D joints) in tanks and heat exchangers manufactured by various vendors. Specifically, four main steam isolation valve air accumulator tanks were found to have undersized nozzle-to-shell joints at the River Bend plant; seven tanks were found to have undersized nozzle-to-shell weld reinforcements at the Shearon Harris Station; eight tanks and two heat exchangers were found to have undersized nozzle-to-shell weld reinforcements at Braidwood Station. These tanks and heat exchangers were Code stamped and certified as being constructed in accordance with the requirements of the ASME Code. The ASME Code, Section III (NX-3352.4) requires that nozzle-to-shell welded joints have reinforcement (t c ) of 0.7t p or 1/4 inch, whichever is less, where t p is the thickness of the penetrating part. Some of the inspected welded joints did not have the minimum weld reinforcement (t c ) required by the Code. Other joints had the minimum weld reinforcement (t c ) required by the Code, but were found to be undersized with respect to the sizes specified on the applicable construction drawings

31 CFR Appendixes to Chapter V - Note

Science.gov (United States)

2010-07-01

.... Freight forwarders and shippers may not charter, book cargo on, or otherwise deal with blocked vessels. 7. References to regulatory parts in chapter V or other authorities: [BALKANS]: Western Balkans Stabilization... the economic sanctions programs in chapter V. (Please call OFAC Compliance Programs Division for...

Chapter 14. Radionuclides in vegetal production and food processing

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with problems connected with using of radionuclides in vegetal production and food processing. Chapter consist of next parts: (1) Influence of radiation on foods; (2) Radiation sterilisation in health service

Getting the Most from Pi Sigma Alpha Chapters: Exploring the Chapter Activity Grant Program and Its Multiplier Effects

Science.gov (United States)

Alexander, Robert M.

2009-01-01

The political science honor society, Pi Sigma Alpha, has chapters in nearly 700 institutions across the United States. The organization sponsors many programs that can contribute a great deal to students of political science; however, many students are unaware of these opportunities. This article encourages chapter advisors to make use of these…

The ASME Boiler and Pressure Vessel Code: overview

International Nuclear Information System (INIS)

Farr, J.R.

1987-01-01

To become familiar with the Boiler and Pressure Vessel Code of the American Society of Mechanical Engineers, it is necessary to understand the history, organization, and operation of the Boiler Code Committee as well as to become familiar with the important aspects of each Section of the Code. This chapter will review the background and contents of the Code as well as give a review of the salient contents of most sections. (author)

How to write a medical book chapter?

Science.gov (United States)

Kendirci, Muammer

2013-01-01

Invited medical book chapters are usually requested by editors from experienced authors who have made significant contributions to the literature in certain fields requested by an editor from an experienced. Before the start of the writing process a consensus should be established between the editor and the author with regard to the title, deadline, specific instructions and content of the manuscript. Certain issues concerning a chapter can be negotiated by the parties beforehand, but some issues cannot. As writing a medical book chapter is seen as an honor in its own right, the assignment needs to be treated with sincerity by elucidating the topic in detail, and maximal effort should be made to keep in mind that the chapter will reach a large target audience. The purpose of this review article is to provide guidance to residents and junior specialists in the field of urology to improve their writing skills. PMID:26328134

Control and monitoring of landfill gas underground migration at the City of Montreal sanitary landfill site

International Nuclear Information System (INIS)

Heroux, M.; Turcotte, L.

1997-01-01

The proposed paper covers the various aspects of control and monitoring of potential landfill gas (LFG) migration through soil voids or rock fractures at the City of Montreal sanitary landfill site. It depicts the social, geographical and geological context and presents a brief history of the landfill site. It describes the LFG collecting system and LFG migration monitoring equipment and programs. Finally it presents monitoring data taken over last few years. The landfill site is located in a well populated urban area. Since 1968, about 33 million metric tons of domestic and commercial waste have been buried in a former limestone quarry. Because of houses and buildings in the vicinity, 100 m in some locations, LFG underground migration is a major risk. LFG could indeed infiltrate buildings and reach explosive concentrations. So it must be controlled. The City of Montreal acquired the site in 1988 and has progressively built a LFG collecting system, composed of more than 288 vertical wells, to pump out of the landfill 280 million m 3 of gas annually. To verify the efficiency of this system to minimize LFG underground migration, monitoring equipment and programs have also been designed and put into operation. The monitoring network, located all around the landfill area, is composed of 21 well nests automated to monitor presence of gas in the ground in real time. In addition, 55 individual wells, where manual measurements are made, are also available. To complete the monitoring program, some measurements are also taken in buildings, houses and underground utilities in the neighborhood of the site. Monitoring data show that LFG underground migration is well controlled. They also indicate significant decrease of migration over the years corresponding to improvements to the LFG collecting system

Montreal Cognitive Assessment (MoCA): validation study for frontotemporal dementia.

Science.gov (United States)

Freitas, Sandra; Simões, Mário R; Alves, Lara; Duro, Diana; Santana, Isabel

2012-09-01

The Montreal Cognitive Assessment (MoCA) is a brief instrument developed for the screening of milder forms of cognitive impairment, having surpassed the well-known limitations of the Mini-Mental State Examination (MMSE). The aim of the present study was to validate the MoCA as a cognitive screening test for behavioral-variant frontotemporal dementia (bv-FTD) by examining its psychometric properties and diagnostic accuracy. Three matched subgroups of participants were considered: bv-FTD (n = 50), Alzheimer disease (n = 50), and a control group of healthy adults (n = 50). Compared with the MMSE, the MoCA demonstrated consistently superior psychometric properties and discriminant capacity, providing comprehensive information about the patients' cognitive profiles. The diagnostic accuracy of MoCA for bv-FTD was extremely high (area under the curve AUC [MoCA] = 0.934, 95% confidence interval [CI] = 0.866-.974; AUC [MMSE] = 0.772, 95% CI = 0.677-0.850). With a cutoff below 17 points, the MoCA results for sensitivity, specificity, positive predictive value, negative predictive value, and classification accuracy were significantly superior to those of the MMSE. The MoCA is a sensitive and accurate instrument for screening the patients with bv-FTD and represents a better option than the MMSE.

Basic Principles - Chapter 6

Data.gov (United States)

National Aeronautics and Space Administration — This chapter described at a very high level some of the considerations that need to be made when designing algorithms for a vehicle health management application....

The Students’ misconceptions profile on chapter gas kinetic theory

Science.gov (United States)

Jauhariyah, M. N. R.; Suprapto, N.; Suliyanah; Admoko, S.; Setyarsih, W.; Harizah, Z.; Zulfa, I.

2018-03-01

Students have conception and misconceptions in the learning process. Misconceptions are caused by the teacher, students, and learning source. In the previous study, the researcher developed a misconception diagnosis instrument using three-tier on chapter gas kinetic theory. There are 14 items including 5 sub-chapters on gas kinetic theory. The profile of students’ misconceptions shows that students have misconceptions in each sub-chapter. The cause of misconceptions came from preconceptions, associative thinking, reasoning, intuition, and false negative. The highest cause of misconception in this chapter is student’s humanistic thinking.

Manganese concentrations in the air of the Montreal (Canada) subway in relation to surface automobile traffic density

Energy Technology Data Exchange (ETDEWEB)

Boudia, Nacera; Gareau, Lise; Zayed, Joseph [GRIS Interdisciplinary Health Research Group, University of Montreal (Canada); Halley, Renee [Transport Montreal Society (Canada); Kennedy, Greg [Department of Engineering Physics, Ecole Polytechnique de Montreal, Montreal (Canada); Lambert, Jean [Department of Social and Preventive Medicine, Faculty of Medicine, University of Montreal (Canada)

2006-07-31

Methylcyclopentadienyl manganese tricarbonyl (MMT) is an organic derivative of manganese (Mn), used since 1976 in Canadian gasoline as an octane enhancer. Its combustion leads to the emission of Mn particles. Several studies carried out by our research group have established a correlation between atmospheric Mn concentrations and automobile traffic density, suggesting that MMT in gasoline could play a significant role. This study aims to measure Mn concentrations in the air of the underground subway in Montreal (Canada) and to examine the relation with nearby surface automobile traffic density and, by extension, with the use of MMT in gasoline. Three subway stations were chosen for their location in different microenvironments with different traffic densities. Respirable (MnR<5 {mu}m) and total Mn (MnT) were sampled over two weeks, 5 days/week, 12 h/day. For the station located in the lower traffic density area, relatively low levels of MnR and MnT were found, with averages of 0.018 and 0.032 {mu}g/m{sup 3}, respectively. These concentrations are within the range of the background levels in Montreal. For the other two stations, the average concentrations of MnR were twice as high and exceeded the US EPA reference concentration of 0.05 {mu}g/m{sup 3}. Although there may be several sources of Mn from different components of the subway structure and vehicles, no correlation was found between subway traffic and atmospheric Mn in the subway. Since the air in the underground subway is pumped directly from outside without filtration, our findings strongly suggest that the combustion of MMT in automobiles is an important factor. (author)

Bank of Montreal v. Dynex Petroleum Ltd.: the priority of overriding royalties and net profit interests

International Nuclear Information System (INIS)

Dearlove, F.R.

1996-01-01

The practice by the petroleum industry of granting overriding royalties (ORRs) and net profit interests (NPIs), was discussed. Some of the reasons for granting ORRs or NPIs included: (1) securing a lease, (2) obtaining geological information, (3) a condition of employment, or (4) acceptance of risk in exploration. In the recent case of Bank of Montreal versus Dynex Petroleum Ltd., it was held that in Alberta, ORRs and NPIs issuing out of a lessee's interest in an oil and gas lease cannot be a grant of interest in land. The effect of this decision is that it will make it difficult to create an ORR or NPI that is not merely a contract. An appeal is expected

The Chapter 1 Challenge: Colorado's Contribution 1993.

Science.gov (United States)

Petro, Janice Rose; And Others

An overview is provided of Colorado's participation in Chapter 1, the largest federally funded program designed to provide services to elementary and secondary students. Chapter 1 provides financial assistance to state and local education agencies to meet the special needs of educationally deprived children who reside in areas with high…

Probabilistic evaluation of design S-N curve and reliability assessment of ASME code-based evaluation

International Nuclear Information System (INIS)

Zhao Yongxiang

1999-01-01

A probabilistic evaluating approach of design S-N curve and a reliability assessment approach of the ASME code-based evaluation are presented on the basis of Langer S-N model-based P-S-N curves. The P-S-N curves are estimated by a so-called general maximum likelihood method. This method can be applied to deal with the virtual stress amplitude-crack initial life data which have a characteristics of double random variables. Investigation of a set of the virtual stress amplitude-crack initial life (S-N) data of 1Cr18Ni9Ti austenitic stainless steel-welded joint reveals that the P-S-N curves can give a good prediction of scatter regularity of the S-N data. Probabilistic evaluation of the design S-N curve with 0.9999 survival probability has considered various uncertainties, besides of the scatter of the S-N data, to an appropriate extent. The ASME code-based evaluation with 20 reduction factor on the mean life is much more conservative than that with 2 reduction factor on the stress amplitude. Evaluation of the latter in 666.61 MPa virtual stress amplitude is equivalent to 0.999522 survival probability and in 2092.18 MPa virtual stress amplitude equivalent to 0.9999999995 survival probability. This means that the evaluation in the low loading level may be non-conservative and in contrast, too conservative in the high loading level. Cause is that the reduction factors are constants and the factors can not take into account the general observation that scatter of the N data increases with the loading level decreasing. This has indicated that it is necessary to apply the probabilistic approach to the evaluation of design S-N curve

Chapter 5: Summary of model application

International Nuclear Information System (INIS)

1995-01-01

This chapter provides a brief summary of the model applications described in Volume III of the Final Report. This chapter dealt with the selected water management regimes; ground water flow regimes; agriculture; ground water quality; hydrodynamics, sediment transport and water quality in the Danube; hydrodynamics, sediment transport and water quality in the river branch system; hydrodynamics, sediment transport and water quality in the Hrusov reservoir and with ecology in this Danube area

Musical cognition in Alzheimer's disease: application of the Montreal Battery of Evaluation of Amusia.

Science.gov (United States)

Campanelli, Alessandra; Rendace, Lidia; Parisi, Francesco; D'Antonio, Fabrizia; Imbriano, Letizia; de Lena, Carlo; Trebbastoni, Alessandro

2016-07-01

The aim of this study was to assess certain musical abilities in 30 patients with Alzheimer's disease (AD) and 30 healthy controls by using the complete version of the Montreal Battery of Evaluation of Amusia (MBEA). This battery evaluates melodic (scale, contour, and interval) and temporal (rhythm and meter) perception of music and musical memory. We found that altered musical processing is a common feature in AD. Despite that, AD subjects show partially spared abilities for temporal organization of music, though not for melodic perception and musical memory. This peculiar dysfunctional pattern could depend on the neurodegenerative involvement of some specific areas for music perception and memory in the brains of AD patients. Further studies are needed to investigate the usefulness of additional musical tests like the MBEA on larger samples to confirm our preliminary data. © 2016 New York Academy of Sciences.

Comparison of Alternate and Original Items on the Montreal Cognitive Assessment.

Science.gov (United States)

Lebedeva, Elena; Huang, Mei; Koski, Lisa

2016-03-01

The Montreal Cognitive Assessment (MoCA) is a screening tool for mild cognitive impairment (MCI) in elderly individuals. We hypothesized that measurement error when using the new alternate MoCA versions to monitor change over time could be related to the use of items that are not of comparable difficulty to their corresponding originals of similar content. The objective of this study was to compare the difficulty of the alternate MoCA items to the original ones. Five selected items from alternate versions of the MoCA were included with items from the original MoCA administered adaptively to geriatric outpatients (N = 78). Rasch analysis was used to estimate the difficulty level of the items. None of the five items from the alternate versions matched the difficulty level of their corresponding original items. This study demonstrates the potential benefits of a Rasch analysis-based approach for selecting items during the process of development of parallel forms. The results suggest that better match of the items from different MoCA forms by their difficulty would result in higher sensitivity to changes in cognitive function over time.

Montreal Protocol meeting looks to speed up phaseout of ozone depleters

International Nuclear Information System (INIS)

Rotman, D.; Chynoweth, E.

1992-01-01

Delegates from around the world are meeting in Copenhagen this week to debate an accelerated phaseout of chlorofluorocarbons (CFCs), a time schedule for the eventual phaseout of hydrochlorofluorocarbons (HCFCs), and phaseouts of methyl chloroform and carbon tetrachloride. The fate of methyl bromide will also be a hot issue. The fourth meeting of the parties to the Montreal Protocol is widely expected to put through a 100% CFC phaseout by Jan. 1, 1996, coming into agreement with current US and European Community rules. But debate continues over the intermediate phaseout schedule, with European members pushing for an 85% reduction - from a 1986 baseline - by Jan. 1, 1994, and others arguing for a 70% cut by 1994. Delegates are expected to agree to the final phaseout of halons on Jan. 1, 1996, with an 85% cut in carbon tet by 1995. The meeting is also expected to broadly agree on a Jan. 1, 1996 phaseout of methyl chloroform, with a 50% reduction from a 1989 baseline by Jan. 1, 1994. A critical debate for chemical producers will be on the fate of methyl bromide. Many observers expect some phaseout for the chemical, but when and how is undetermined

ASM-Triggered Too Observations of Kilohertz Oscillations in Three Atoll Sources

Science.gov (United States)

Kaaret, P.; Swank, Jean (Technical Monitor)

2000-01-01

Three Rossi Timing Explorer (RXTE) observations were carried out for this proposal based on target of opportunity triggers derived from the All-Sky Monitor (ASM) on RXTE. We obtained short observations of 4U1636-536 (15ks) and 4U1735-44 (23ks) and a longer observation of 4U0614+091 (117ks). Our analysis of our observations of the atoll neutron star x-ray binary 4U1735-44 lead to the discovery of a second high frequency quasiperiodic oscillation (QPO) in this source. These results were published in the Astrophysical Journal Letters. The data obtained on the source 4U0614+091 were used in a comprehensive study of this source, which will be published in the Astrophysical Journal. The data from this proposal were particularly critical for that study as they lead to the detection of the highest QPO frequency every found in the x-ray emission from an x-ray binary which will be important in placing limits on the equation of state of nuclear matter.

instU_3d_asm_Cp: MERRA 3D IAU State, Meteorology Diurnal 1.25 x 1.25 degree V5.2.0 (MAIUCPASM) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MAIUCPASM or instU_3d_asm_Cp data product is the MERRA Data Assimilation System 3-Dimensional assimilated state on pressure, at a reduced resolution. It is a...

Chapter 4. Radioactivity of waters and factors influencing its value

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with radioactivity of waters and factors influencing its value. Chapter consists of next parts: (1) Natural radioactivity of hydrosphere; (2) Radioactive contamination of hydrosphere

Application of the ASME code in the design of the GA-4 and GA-9 casks

International Nuclear Information System (INIS)

Mings, W.J.; Koploy, M.A.

1992-01-01

General Atomics (GA) is developing two spent fuel shipping casks for transport by legal weight truck (LWT). The casks are designed to the loading, environmental conditions and safety requirements defined in Title 10 of the Code of Federal Regulations, Part 71 (10CFR71). To ensure that all components of the cask meet the 10CFR71 rules, GA established structural design criteria for each component based on NRC Regulatory Guides and the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (ASME Code). This paper discusses the criteria used for different cask components, how they were applied and the conservatism and safety margins built into the criteria and assumption

Evaluation of the integrity of reactor vessels designed to ASME Code, Sections I and/or VIII

International Nuclear Information System (INIS)

Hoge, K.G.

1976-01-01

A documented review of nuclear reactor pressure vessels designed to ASME Code, Sections I and/or VIII is made. The review is primarily concerned with the design specifications and quality assurance programs utilized for the reactor vessel construction and the status of power plant material surveillance programs, pressure-temperature operating limits, and inservice inspection programs. The following ten reactor vessels for light-water power reactors are covered in the report: Indian Point Unit No. 1, Dresden Unit No. 1, Yankee Rowe, Humboldt Bay Unit No. 3, Big Rock Point, San Onofre Unit No. 1, Connecticut Yankee, Oyster Creek, Nine Mile Point Unit No. 1, and La Crosse

[Quantitative analysis of the structure of neuronal dendritic spines in the striatum using the Leitz-ASM system].

Science.gov (United States)

Leontovich, T A; Zvegintseva, E G

1985-10-01

Two principal classes of striatum long axonal neurons (sparsely ramified reticular cells and densely ramified dendritic cells) were analyzed quantitatively in four animal species: hedgehog, rabbit, dog and monkey. The cross section area, total dendritic length and the area of dendritic field were measured using "LEITZ-ASM" system. Classes of neurons studied were significantly different in dogs and monkeys, while no differences were noted between hedgehog and rabbit. Reticular neurons of different species varied much more than dendritic ones. Quantitative analysis has revealed the progressive increase in the complexity of dendritic tree in mammals from rabbit to monkey.

Modeling Nitrous Oxide Production during Biological Nitrogen Removal via Nitrification and Denitrification: Extensions to the General ASM Models

DEFF Research Database (Denmark)

Ni, Bing-Jie; Ruscalleda, Maël; Pellicer i Nàcher, Carles

2011-01-01

on N2O production from four different mixed culture nitrification and denitrification reactor study reports. Modeling results confirm that hydroxylamine oxidation by ammonium oxidizers (AOB) occurs 10 times slower when NO2– participates as final electron acceptor compared to the oxic pathway. Among......Nitrous oxide (N2O) can be formed during biological nitrogen (N) removal processes. In this work, a mathematical model is developed that describes N2O production and consumption during activated sludge nitrification and denitrification. The well-known ASM process models are extended to capture N2O...

Chapter 2: Optical Properties of the Water Column

Science.gov (United States)

Kiefer, D. A.; Collins, D. J.

1994-01-01

In this chapter, and in chapter 29, the basic inter-relationship between the flux of radiant energy through the water column and the fixation of carbon by the phytoplankton in the ocean through processes of photosynthesis or primary production will be discussed.

Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter XI: concept evolution, chapter XII: design concept, and chapter XIII: operation and test programme

International Nuclear Information System (INIS)

Tomabechi, Ken; Fujisawa, Noboru; Iida, Hiromasa

1985-07-01

This report corresponds to Chapters XI, XII, and XIII of Japanese contribution report to IAEA INTOR Workship, Phase Two A, Part 2. In the phase Two A, Part 2 workshop, we have studied critical technical issues and have also assessed scientific and technical data bases. Based on those results, the INTOR design have been modified to upgrade the design concept. The major modification items are related to plasma beta value, plasma operation scenario, reactor size reduction, neutron fluence, tritium producing blanket, and implementation of active control coils. In those chapters, the concept evolution for the design modification and main results are described. (author)

Forestry [Chapter 11

Science.gov (United States)

H. Gyde Lund; William A. Befort; James E. Brickell; William M. Ciesla; Elizabeth C. Collins; Raymond L. Czaplewski; Attilio Antonio Disperati; Robert W. Douglass; Charles W. Dull; Jerry D. Greer; Rachel Riemann Hershey; Vernon J. LaBau; Henry Lachowski; Peter A. Murtha; David J. Nowak; Marc A. Roberts; Pierre Schram; Mahadev D. Shedha; Ashbindu Singh; Kenneth C. Winterberger

1997-01-01

Foresters and other resource managers have used aerial photographs to help manage resources since the late 1920s. As discussed in chapter 1, however, it was not until the mid-1940s that their use became common. Obtaining photographic coverage was always a problem. For many areas of the world, reasonably complete coverage did not exist until after World War II. In...

Chapter 6: Accidents

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

Th chapter 6 presents the accidents of: 1) Stimos (Italy - May, 1975); 2) San Salvador (El Salvador - February 5, 1989); 3) Soreq (Israel - June 21, 1990); 4) Nesvizh (Belarus - October 26, 1991); 5) Illinois (USA - February, 1965); 6)Maryland (EUA - December 11, 1991); 7)Hanoi (Vietnam -November 17, 1992); 8)Fleurus (Belgium - March 11, 2006) and final remarks on accidents.

Report, realized on behalf of the foreign Affairs, the Defense and the Armed Forces Commission: - on the law project, carried by the Senate, authorizing the approval of the amendment for the 16 september 1987 Montreal protocol relative to the substances which impoverish the ozone layer, adopted at Montreal the 17 september 1997; - and on the law project, carried by the Senate, authorizing the approval of the amendment for the 16 september 1987 Montreal protocol relative to the substances which impoverish the ozone layer, adopted at Pekin the 3 december 1999

Energy Technology Data Exchange (ETDEWEB)

Guillet, J.J.

2003-07-01

The document presents the text of the law projects concerning the substances which impoverish the ozone layer. Facts of science,protection systems and the two amendments adopted at Montreal in 1997 and Pekin in 1999 are discussed. For each countries data on the substances impoverish the ozone layer, are also given. (A.L.B.)

Use of alumni and employer surveys for internal quality assurance of the DVM program at the University of Montreal.

Science.gov (United States)

Doucet, Michèle Y; Vrins, André

2010-01-01

Annual alumni and employer surveys, initially designed as outcomes assessment tools, were integrated into a new internal quality assurance strategy to improve the doctor of veterinary medicine program at the University of Montreal's Faculté de Médecine Vétérinaire. Data collected annually from the classes of 2004-2007 indicated that alumni and their employers were generally satisfied with their level of preparation after one year of professional activity. Specific weaknesses were found in non-technical skills such as communication and resource management. These data were used in support of other forms of feedback to guide curricular reform.

Chapter 12. Nullification of nuclear reactors

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with problems connected with nullification of nuclear reactors. There are tree basic methods of nullification of nuclear reactors: (1) conservation, (2) safe close (wall up, embed in concrete), (3) direct dismantlement and remotion and two combined ways: (1) combination of mothball with subsequent dismantlement and remotion and (2) combination of safe close with subsequent dismantlement and remotion. Activity levels as well as volumes of radioactive wastes connected with decommissioning of nuclear reactors are reviewed

Review of plants to mitigate particulate matter, ozone as well as nitrogen dioxide air pollutants and applicable recommendations for green roofs in Montreal, Quebec.

Science.gov (United States)

Gourdji, Shannon

2018-05-28

In urbanized regions with expansive impervious surfaces and often low vegetation cover, air pollution due to motor vehicles and other combustion sources, is a problem. The poor air quality days in Montreal, Quebec are mainly due to fine particulate matter and ozone. Businesses using wood ovens are a source of particulates. Careful vegetation selection and increased green roof usage can improve air quality. This paper reviews different green roofs and the capability of plants in particulate matter (PM), ozone (O 3 ) as well as nitrogen dioxide (NO 2 ) level reductions. Both the recommended green roof category and plants to reduce these pollutants in Montreal's zone 5 hardiness region are provided. Green roofs with larger vegetation including shrubs and trees, or intensive green roofs, remove air pollutants to a greater extent and are advisable to implement on existing, retrofitted or new buildings. PM is most effectively captured by pines. The small Pinus strobus 'Nana', Pinus mugho var. pumilio, Pinus mugho 'Slowmound' and Pinus pumila 'Dwarf Blue' are good candidates for intensive green roofs. Drought tolerant, deciduous broadleaved trees with low biogenic volatile organic compound emissions including Japanese Maple or Acer palmatum 'Shaina' and 'Mikawa-Yatsubusa' are options to reduce O 3 levels. Magnolias are tolerant to NO 2 and it is important in their metabolic pathways. The small cold-tolerant Magnolia 'Genie' is a good option to remove NO 2 in urban settings and to indirectly reduce O 3 formation. Given the emissions by Montreal businesses' wood ovens, calculations performed based on their respective complex roof areas obtained via Google Earth Pro indicates 88% Pinus mugho var. pumilio roof coverage can annually remove 92.37 kg of PM 10 of which 35.10 kg is PM 2.5 . The removal rates are 4.00 g/m 2 and 1.52 g/m 2 for PM 10 and PM 2.5 , respectively. This paper provides insight to addressing air pollution through urban rooftop greening. Copyright �

Chapter 0: Executive summary

International Nuclear Information System (INIS)

1995-01-01

This chapter deals with the background (Gabcikovo hydro power scheme was input in October 1992), project objective, project framework, equipment, establishment of the integrated modelling system, model setup, calibration and validation, definitions of scenarios for model application and with the results of model applications

Chapter 14. Greenhouses

Energy Technology Data Exchange (ETDEWEB)

Rafferty, Kevin D.

1998-01-01

Greenhouse heating is one of the most common uses of geothermal resources. Because of the significant heating requirements of greenhouses and their ability to use very low- temperature fluids, they are a natural application. The evaluation of a particular greenhouse project involves consideration of the structure heating requirements, and the system to meet those requirements. This chapter is intended to provide information on each of these areas.

The northern pike, a prized native but disastrous invasive: Chapter 14

Science.gov (United States)

Rutz, David; Massengill, Robert L.; Sepulveda, Adam; Dunker, Kristine J.

2018-01-01

As the chapters in this book describe, the northern pike Esox lucius Linneaus, 1758 is a fascinating fish that plays an important ecological role in structuring aquatic communities (chapter 8), has the capacity to aid lake restoration efforts (chapter 11), and contributes substantially to local economies, both as a highlysought after sport fish (chapter 12) and as a commercial fishing resource (chapter 13). However, despite the magnificent attributes of this fish, there is another side to its story. Specifically, what happens when northern pike, a highly efficient predator, becomes established outside its natural range? To explore this question, this chapter will investigate observed consequences from many locations where northern pike (hereafter referred to as “pike”) have been introduced and discuss potential reasons why pike, under the right circumstances, can be considered an invasive species.

2 CFR 1.200 - Purpose of chapters I and II.

Science.gov (United States)

2010-01-01

... (and thereby implement the Federal Financial Assistance Management Improvement Act of 1999, Pub. L. 106... Introduction toSubtitle A § 1.200 Purpose of chapters I and II. (a) Chapters I and II of subtitle A provide OMB... procedures for management of the agencies' grants and agreements. (b) There are two chapters for publication...

Seasonal Difference in Postthyroidectomy Hypocalcemia: A Montreal-Based Study.

Science.gov (United States)

Mascarella, Marco A; Forest, Véronique-Isabelle; Nhan, Carol; Leboeuf, Rébecca; Tamilia, Michael; Mlynarek, Alex M; Payne, Richard J

2016-02-01

Hypocalcemia following thyroidectomy often prolongs hospital stay and is potentially life-threatening. The objective of this study is to determine whether the season when thyroidectomy is performed is associated with postoperative hypocalcemia. Retrospective case series of patients undergoing thyroid surgery from 2009 to 2015. Tertiary care academic institution in Montreal, Canada. A consecutive sample of 823 patients undergoing thyroidectomy by a single high-volume otolaryngologist for a suspected or confirmed thyroid malignancy. Patient demographics, procedure type, calcium and vitamin D supplementation, and seasonal rate of hypocalcemia postthyroidectomy were calculated and compared. Average seasonal rates of postthyroidectomy hypocalcemia in the winter, spring, summer, and autumn were, respectively, 8.3% (8 of 216), 7.3% (12 of 165), 1.5% (3 of 201), and 3.5% (8 of 228; P operated in the winter were 5.6 times more likely to develop hypocalcemia as compared with those in the summer (P factoring in season when surgery was performed, procedure type, and preoperative vitamin D/calcium supplementation, surgery occurring in the winter predicted a hypocalcemia event (correlation coefficient [SE]: 0.72 [0.024], P = .026; 0.006 [0.025], P = .81; 0.004 [0.019], P = .82, respectively). In this study, patients undergoing thyroidectomy in the winter months were more likely to develop postoperative hypocalcemia when compared with those operated in the summer. Further studies are needed to understand the role of vitamin D in the observed seasonal difference in hypocalcemia rates. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

Palaeoclimate. Chapter 6

Energy Technology Data Exchange (ETDEWEB)

Jansen, E.; Overpeck, J.; Briffa, K.R.; Duplessy, J.C.; Joos, F.; Masson-Delmotte, V.; Olago, D.; Otto-Bliesner, B.; Peltier, W.R.; Rahmstorf, S.; Ramesh, R.; Raynaud, D.; Rind, D.; Solomina, O.; Villalba, R.; Zhang, D.

2007-09-15

This chapter assesses palaeoclimatic data and knowledge of how the climate system changes over interannual to millennial time scales, and how well these variations can be simulated with climate models. Additional palaeoclimatic perspectives are included in other chapters. Palaeoclimate science has made significant advances since the 1970s, when a primary focus was on the origin of the ice ages, the possibility of an imminent future ice age, and the first explorations of the so-called Little Ice Age and Medieval Warm Period. Even in the first IPCC assessment, many climatic variations prior to the instrumental record were not that well known or understood. Fifteen years later, understanding is much improved, more quantitative and better integrated with respect to observations and modelling. After a brief overview of palaeoclimatic methods, including their strengths and weaknesses, this chapter examines the palaeoclimatic record in chronological order, from oldest to youngest. This approach was selected because the climate system varies and changes over all time scales, and it is instructive to understand the contributions that lower-frequency patterns of climate change might make in influencing higher-frequency patterns of variability and change. In addition, an examination of how the climate system has responded to large changes in climate forcing in the past is useful in assessing how the same climate system might respond to the large anticipated forcing changes in the future. Cutting across this chronologically based presentation are assessments of climate forcing and response, and of the ability of state-of-the-art climate models to simulate the responses. Perspectives from palaeoclimatic observations, theory and modelling are integrated wherever possible to reduce uncertainty in the assessment. Several sections also assess the latest developments in the rapidly advancing area of abrupt climate change, that is, forced or unforced climatic change that involves

Palaeoclimate. Chapter 6

International Nuclear Information System (INIS)

Jansen, E.; Overpeck, J.; Briffa, K.R.; Duplessy, J.C.; Joos, F.; Masson-Delmotte, V.; Olago, D.; Otto-Bliesner, B.; Peltier, W.R.; Rahmstorf, S.; Ramesh, R.; Raynaud, D.; Rind, D.; Solomina, O.; Villalba, R.; Zhang, D.

2007-01-01

This chapter assesses palaeoclimatic data and knowledge of how the climate system changes over interannual to millennial time scales, and how well these variations can be simulated with climate models. Additional palaeoclimatic perspectives are included in other chapters. Palaeoclimate science has made significant advances since the 1970s, when a primary focus was on the origin of the ice ages, the possibility of an imminent future ice age, and the first explorations of the so-called Little Ice Age and Medieval Warm Period. Even in the first IPCC assessment, many climatic variations prior to the instrumental record were not that well known or understood. Fifteen years later, understanding is much improved, more quantitative and better integrated with respect to observations and modelling. After a brief overview of palaeoclimatic methods, including their strengths and weaknesses, this chapter examines the palaeoclimatic record in chronological order, from oldest to youngest. This approach was selected because the climate system varies and changes over all time scales, and it is instructive to understand the contributions that lower-frequency patterns of climate change might make in influencing higher-frequency patterns of variability and change. In addition, an examination of how the climate system has responded to large changes in climate forcing in the past is useful in assessing how the same climate system might respond to the large anticipated forcing changes in the future. Cutting across this chronologically based presentation are assessments of climate forcing and response, and of the ability of state-of-the-art climate models to simulate the responses. Perspectives from palaeoclimatic observations, theory and modelling are integrated wherever possible to reduce uncertainty in the assessment. Several sections also assess the latest developments in the rapidly advancing area of abrupt climate change, that is, forced or unforced climatic change that involves

Desobstrução ineficaz das vias aéreas em crianças asmáticas: um estudo descritivo

Directory of Open Access Journals (Sweden)

Lanuza Celes Mendes

2012-01-01

Full Text Available Estudio transversal realizado con 147 niños asmáticos ingresados en un hospital público de Fortaleza-CE, Brasil. Ha sido desarrollado con el objetivo de analizar la efectividad de las características definitorias del diagnóstico de enfermería "limpieza ineficaz de las vías aéreas" en niños asmáticos. Se utilizó un guión de examen físico para recopilar los datos. Las características definitorias más frecuentes fueron ruidos respiratorios agregados (82,3%, disnea (55,8% y cambio en la frecuencia respiratoria (50,3%. El diagnóstico de enfermería: "limpieza ineficaz de las vías aéreas" estuvo presente en el 55,8% de la muestra. La característica definitoria para este diagnóstico fueron los "ruidos respiratorios agregados". La característica específica ha sido "ojos muy abiertos". Con relación a los valores predictivos, los ruidos respiratorios agregados presentaron un alto valor predictivo negativo. Se llegó a la conclusión de que los estudios que contribuyen a configurar el perfil de las características definitorias más comunes a una población particular deben ser fomentados, pues sirven de guía para la práctica de enfermería.

Vessels for elevated temperature service

International Nuclear Information System (INIS)

O'Donnell, W.J.; Porowski, J.S.

1983-01-01

The subject is covered in chapters, entitled: introduction (background; elevated temperature concerns; design tools); design of pressure vessels for elevated temperature per ASME code; basic elevated temperature failure modes; allowable stresses and strains per ASME code (basic allowable stress limits; ASME code limits for bending; time-fraction summations; strain limits; buckling and instability; negligible creep and stress-rupture effects); combined membrane and bending stresses in creep regime; thermal stress cycles; bounding methods based on elastic core concept (bounds on accumulated strains; more accurate bounds; strain ranges; maximum stresses; strains at discontinuities); elastic follow-up; creep strain concentrations; time-dependent fatigue (combined creep rupture and fatigue damage; limits for inelastic design analyses; limits for elastic design analyses); flaw evaluation techniques; type 316 stainless steel; type 304 stainless steel; steel 2 1/4Cr1Mo; Inconel 718; Incolloy 800; Hastelloy X; detailed inelastic design analyses. (U.K.)

Chapter 7: Transport and load of radioactive material

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

Related to the topic, the chapter 7 presents: 1) import License; 2) transport; 3) loading the irradiator. The information presented in this chapter is based on the Brazilian legislation, but said legislation is based on international guidelines; therefore there will be several common and different points from country to country.

Radiation Protection. Chapter 24

Energy Technology Data Exchange (ETDEWEB)

Sutton, D. [Ninewells Hospital, Dundee (United Kingdom); Collins, L. T. [Westmead Hospital, Sydney (Australia); Le Heron, J. [International Atomic Energy Agency, Vienna (Austria)

2014-09-15

Chapter 21, in describing basic radiation biology and radiation effects, demonstrates the need to have a system of radiation protection that allows the many beneficial uses of radiation to be realized while ensuring detrimental radiation effects are either prevented or minimized. This can be achieved with the twin objectives of preventing the occurrence of deterministic effects and of limiting the probability of stochastic effects to a level that is considered acceptable. In a radiology facility, consideration needs to be given to the patient, the staff involved in performing the radiological procedures, members of the public and other staff that may be in the radiology facility, carers and comforters of patients undergoing procedures, and persons who may be undergoing a radiological procedure as part of a biomedical research project. This chapter discusses how the objectives given above are fulfilled through a system of radiation protection and how such a system should be applied practically in a radiology facility.

Update on ASME rules for spent nuclear fuel and high level radioactive material and waste storage containments

International Nuclear Information System (INIS)

Ralph S. Hill III; Foster, G.M.

2005-01-01

In 2004, a new Code Case, N-717, of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (Code) was published. The Code Case provides rules for construction of containments used for storage of spent nuclear fuel and high level radioactive material and waste. The Code Case has been incorporated into Section III of the Code as Division 3, Subsection WC, Class SC Storage Containments, and will be published in the 2005 Addenda. This paper provides an informative background and insight for these rules to provide Owners, regulators, designers, and fabricators with a more comprehensive understanding of the technical basis for these rules. (authors)

Captive breeding of the barndoor skate (Dipturus laevis) at the Montreal Biodome, with comparison notes on two other captive-bred skate species.

Science.gov (United States)

Parent, Serge; Pépin, Serge; Genet, Jean-Pierre; Misserey, Laurent; Rojas, Salvador

2008-03-01

In 1997, the Montreal Biodome obtained five barndoor skates (Dipturus laevis) from the waters off Boston, Massachusetts. Six years later, those specimens began reproducing, and the first egg case was collected in November 2003. Since then, 73 hatchlings have been born and raised. Egg cases were observed year round, and annual fecundity was measured for the first time: one female laid 69 eggs in 2005, 85 in 2006 and 115 in 2007. Egg incubation was longer than believed previously, ranging from 342 to 494 days. Hatching occurred throughout the year. Hatchlings averaged 193 mm total length and 128 mm disk width and weighed 32 g. They were fed krill and diced fish. All but one survived the first month. A photo identification system was useful in recognizing two groups of 10 specimens during their first year, and transponders could be inserted in the wing muscles of 1-year-old skates. Total lengths at birth and at age 2 were similar to the data reported from the wild, suggesting a similar growth pattern in captivity. The reproduction characteristics of the barndoor skate were compared with those of two other skate species currently bred at the Montreal Biodome, the winter skate (Leucoraja ocellata) and the thorny skate (Amblyraja radiata). Zoo Biol 27:145-153, 2008. (c) 2008 Wiley-Liss, Inc.

NRC needs and their implementation-ASME Section IX code

International Nuclear Information System (INIS)

Liaw, B.D.

1985-01-01

The guiding principle from the onset of government regulation for the peaceful use of nuclear energy has been to prescribe only the minimum requirements that are needed for safety. In the pioneer regulators' collective mind, the technical details could be left to the regulated industry through its agents like NSSS vendors and A/E's and their surrogate organizations like ASME, ANS, AIF, etc. However, it has evolved through the years, due either to the bureaucratic momentum or the vacuum in industry leadership, into a situation where one sees an ever increasing number of detailed ''requirements'' prescribed by the regulators. Within the scope of activities covered by Section XI, there is no exception: e.g., NUREG-067, -0531 -1061; NUREG-0313 Rev. 0, Rev. 1, and now Rev. 2; IE Bulletins 82-03, 83-02; and Generic Letters 84-11, and 84-07, etc. for one issue of pipe crack alone; and there are more to come. There appears a consensus among all concerned parties including regulators that this is not a desirable situation and that something must be done to reverse this trend. The purpose of this discussion is, therefore, to explore the areas where the Section XI Code can be restructured to meet this need, and to seek ideas from the representatives of the regulated industry on the methods of implementation that are effective, efficient, and acceptable to all concerned parties

American Red Cross Chapter Regions

Data.gov (United States)

Department of Homeland Security — The Regions are part of the national field level structure to support chapters. The Regions role is admistrative as well as provides oversight and program technical...

Required internship in diagnostic radiology in the fifth year of medicine at Montreal University

International Nuclear Information System (INIS)

Saint-Georges, G.; Raymond-Tremblay, D.; Danais, S.; Dussault, R.; Grignon, A.; Lafortune, M.; Saltiel, J.

1984-01-01

Problems of methodology, organization, and evaluation confronting the radiology departments of the university hospitals affiliated with the University of Montreal, the medical students, and the University itself in connection with an elective internship in radiology offered in the fifth year of medicine, resulted in the formation of a committee to reorganize the course of study. In this concise article the authors describe this and other measures taken by the University to solve these problems. The committees' main purpose was to restructure the internship which was made compulsory so that future physicians would be prepared to draw on the resources of diagnostic radiology and nuclear medicine. To this end, the committee formulated the objectives, content, evaluation system, and pedagogical methods to be used in those courses. The 25 self-teaching modules, together with the observation and practical interpretation of radiology sessions, proved highly useful in solving the initial problems, and were of particular interest to the students. (author)

Selecting corporate political tactics: The Montreal Protocol on substances that deplete the ozone layer

International Nuclear Information System (INIS)

Getz, K.A.

1991-01-01

This study examines factors influencing the choice of one set of tactics over others. The case of ozone depletion is used as the research context, and the data are drawn from US companies having a stake in this issue. A model is developed which suggests that a firm's choice of political tactics (dependent variable) is dependent on the targets of political activity and the nature of the issue of concern (independent variables), and a variety of organizational and industry factors (moderating variables). The paradigm of agency is used to systematically assess the relative importance of these factors. To test the relevance of the model, an empirical study was done. The case of the Montreal protocol on Substances That Deplete the Ozone Layer was chosen as a setting; and 551 firms directly affected by policy intended to protect the ozone layer were surveyed. There were 151 usable responses. Generally, the findings were consistent with the model

A Comparison of the Variability of the Symbiotic X-ray Binaries GX 1+4, 4U 1954+31, and 4U 1700+24 from Swift/BAT and RXTE/ASM Observations

Science.gov (United States)

Corbet, R. H. D.; Sokoloski, J. L.; Mukai, K.; Markwardt, C. B.; Tueller, J.

2007-01-01

We present an analysis of the X-ray variability of three symbiotic X-ray binaries, GX 1+4, 4U 1700+24, and 4U 1954+31, using observations made with the Swift Burst Alert Telescope (BAT) and the Rossi X-ray Timing Explorer (RXTE) All-Sky Monitor (ASM). Observations of 4U 1954+31 with the Swift BAT show modulation at a period near 5 hours. Models to explain this modulation are discussed including the presence of an exceptionally slow X-ray pulsar in the system and accretion instabilities. We conclude that the most likely interpretation is that 4U 1954+31 contains one of the slowest known X-ray pulsars. Unlike 4U 1954+31, neither GX 1+4 nor 4U 1700+24 show any evidence for modulation on a timescale of hours. An analysis of the RXTE ASM light curves of GX l+4, 4U 1700+24, and 4U 1954+31 does not show the presence of periodic modulation in any source, although there is considerable variability on long timescales for all three sources. There is no modulation in GX 1+4 on either the optical 1161 day orbital period or a previously reported 304 day X-ray period. For 4U 1700+24 we do not confirm the 404 day period previously proposed for this source from a shorter duration ASM light curve.

Summary and evaluation of nuclear waste forms. Chapter 12

International Nuclear Information System (INIS)

Lutze, W.; Ewing, R.C.

1988-01-01

In this chapter data are compiled from the foregoing contributed chapters into tables. In a few cases additional more recent data not found in the chapters have been included in the tables. The following waste form data are summarized: physical properties, chemical durability, radiation effects and the status of processing techniques. In addition important aspects of the comparison of waste forms and the response of waste forms (glass and ceramic) to corrosion and radiation effects are discussed. (author). 119 refs.; 6 figs.; 5 tabs

Velódromo Olímpico de Montreal – Canadá

Directory of Open Access Journals (Sweden)

Taillibert, Roger

1976-12-01

Full Text Available This stadium is one of the most interesting ones that have been constructed lately. It has the following basic conditions: harmonious integration with the other Olympic installations; possibilities for future enlargements; total absence of supports; perfect permeability for the natural daylight; and perfect insulations in view of the hard climate of Montreal. Bearing these features in mind, the building consists of two parts: — The velodrome itself with lawn; 285.70 m long and 7.50 m wide courses with a slope varying between 18° and 48° with regard to the horizontal line; gallery for the public; auxiliary premises; dressing rooms, etc. — And the regular spheric roof the plan form of which represents three segments beginning with one buttress in the northeast end and increasing to three buttresses in the southeast end. This entirely self-supporting dome is 172 m long with a maximum height of 32 m. The total surface is 15,000 m2. The work was calculated by means of computers and was carried out with prefabricated pieces of concrete so as to achieve a better quality control of the concrete, and above all, a greater exactness of the prefabricated members. This was an indispensable factor in this case, where the maximum admissible error in most of the pieces was only 1.5 mm.Es uno de los estadios más interesantes de los últimos tiempos, con las siguientes condiciones básicas: armónica integración con las restantes instalaciones olímpicas; posibilidad de transformación para futuras aplicaciones; total ausencia de soportes; amplia permeabilidad a la luz natural; y perfecta estanquidad ante las duras condiciones climáticas de Montreal. Partiendo de estas premisas, el edificio consta de dos partes: — El velódromo propiamente dicho, con: césped; pista de carreras de 285,70 m de desarrollo, 7,50 m de anchura e inclinación variable entre 18° y 48° respecto a la horizontal; gradas para el público; locales auxiliares

Fatores de risco para hospitalização de crianças e adolescentes asmáticos

Directory of Open Access Journals (Sweden)

Laura Lasmar

2002-08-01

Full Text Available OBJETIVO: Verificar a ocorrência e os fatores de risco associados à hospitalização de um grupo de crianças asmáticas e realizar diagnóstico da assistência à saúde desses pacientes. MÉTODOS: Foram estudados 325 pacientes (crianças e adolescentes asmáticos, registrados em um ambulatório de referência, sendo que 202 já haviam sido hospitalizados. O diagnóstico da assistência prestada foi feito por meio de formulário que abordou características gerais das hospitalizações e fatores biológicos, demográficos, socioeconômicos e os relacionados à asma. Análises univariada e multivariada foram empregadas para verificar a associação entre variáveis independentes e a ocorrência de hospitalização. RESULTADOS: Dos pacientes estudados, 62,2% já haviam sido hospitalizados durante sua moléstia, 64,9% iniciaram crises, e 60,9% se internaram no primeiro ano de vida. A maioria (76,0% apresentava formas clínicas moderadas e graves. Apesar disto, 94,2% não estavam em uso de drogas profiláticas, recebendo assistência apenas durante o episódio agudo. Nenhum dos pacientes se encontrava vinculado à atenção primária para controle periódico da doença e profilaxia com corticosteróides inalados. Os familiares (97,8% não dispunham de conhecimentos básicos necessários ao manejo da asma. Os principais fatores de risco para hospitalização foram: a idade de início dos sintomas antes de 12 meses de idade (OR=3,20, IC95%, 1,55-6,61 ou entre 12 e 24 meses (OR=3,89, IC95%, 1,62-9,36, a escolaridade materna inferior a sete anos de estudos (OR=3,06, IC95%, 1,62-5,76, a gravidade da doença (OR=2,32, IC95%, 1,36-3,96, o número de consultas a serviços de urgência igual ou superior a duas vezes por mês (OR=2,19, IC95%, 1,24-3,88 e o diagnóstico de encaminhamento de pneumonia de repetição (OR=2,00; IC95%, 1,06-3,80. CONCLUSÃO: Com vistas à redução dos índices de hospitalização, os serviços de saúde devem se organizar para

Fatores de risco para hospitalização de crianças e adolescentes asmáticos

Directory of Open Access Journals (Sweden)

Lasmar Laura

2002-01-01

Full Text Available OBJETIVO: Verificar a ocorrência e os fatores de risco associados à hospitalização de um grupo de crianças asmáticas e realizar diagnóstico da assistência à saúde desses pacientes. MÉTODOS: Foram estudados 325 pacientes (crianças e adolescentes asmáticos, registrados em um ambulatório de referência, sendo que 202 já haviam sido hospitalizados. O diagnóstico da assistência prestada foi feito por meio de formulário que abordou características gerais das hospitalizações e fatores biológicos, demográficos, socioeconômicos e os relacionados à asma. Análises univariada e multivariada foram empregadas para verificar a associação entre variáveis independentes e a ocorrência de hospitalização. RESULTADOS: Dos pacientes estudados, 62,2% já haviam sido hospitalizados durante sua moléstia, 64,9% iniciaram crises, e 60,9% se internaram no primeiro ano de vida. A maioria (76,0% apresentava formas clínicas moderadas e graves. Apesar disto, 94,2% não estavam em uso de drogas profiláticas, recebendo assistência apenas durante o episódio agudo. Nenhum dos pacientes se encontrava vinculado à atenção primária para controle periódico da doença e profilaxia com corticosteróides inalados. Os familiares (97,8% não dispunham de conhecimentos básicos necessários ao manejo da asma. Os principais fatores de risco para hospitalização foram: a idade de início dos sintomas antes de 12 meses de idade (OR=3,20, IC95%, 1,55-6,61 ou entre 12 e 24 meses (OR=3,89, IC95%, 1,62-9,36, a escolaridade materna inferior a sete anos de estudos (OR=3,06, IC95%, 1,62-5,76, a gravidade da doença (OR=2,32, IC95%, 1,36-3,96, o número de consultas a serviços de urgência igual ou superior a duas vezes por mês (OR=2,19, IC95%, 1,24-3,88 e o diagnóstico de encaminhamento de pneumonia de repetição (OR=2,00; IC95%, 1,06-3,80. CONCLUSÃO: Com vistas à redução dos índices de hospitalização, os serviços de saúde devem se organizar para

Student chapters: effective dissemination networks for informal optics and photonics education

Science.gov (United States)

Fabian, Dirk; Vermeulen, Nathalie; Van Overmeire, Sara

2009-06-01

Professional societies sponsor student chapters in order to foster scholarship and training in photonics at the college and graduate level, but they are also an excellent resource for disseminating photonics knowledge to pre-college students and teachers. Starting in 2006, we tracked the involvement of SPIE student chapter volunteers in informal pre-college education settings. Chapter students reached 2800, 4900 and 11800 pre-college students respectively from 2006-2008 with some form of informal instruction in optics and photonics. As a case study, the EduKit, a self-contained instruction module featuring refractive and diffractive micro-optics developed by the European Network of Excellence on Micro-Optics (NEMO), was disseminated through student chapters in Argentina, Belgium, Canada, China, Colombia, India, Latvia, Mexico, Peru, Russia, Singapore, South Africa, and the United States. We tracked the movement of this material through the network, up to the student-teacher feedback stage. The student chapter network provided rapid dissemination of the material, translation of the material into the local language, and leveraged existing chapter contacts in schools to provide an audience. We describe the student chapter network and its impact on the development of the EduKit teaching module.

Nuclear Medicine Imaging Devices. Chapter 11

Energy Technology Data Exchange (ETDEWEB)

Lodge, M. A.; Frey, E. C. [Russell H. Morgan Department of Radiology and Radiological Sciences, Johns Hopkins University, Baltimore, MD (United States)

2014-12-15

Imaging forms an important part of nuclear medicine and a number of different imaging devices have been developed. This chapter describes the principles and technological characteristics of the main imaging devices used in nuclear medicine. The two major categories are gamma camera systems and positron emission tomography (PET) systems. The former are used to image γ rays emitted by any nuclide, while the latter exploit the directional correlation between annihilation photons emitted by positron decay. The first section of this chapter discusses the principal components of gamma cameras and how they are used to form 2-D planar images as well as 3-D tomographic images (single photon emission computed tomography (SPECT)). The second section describes related instrumentation that has been optimized for PET data acquisition. A major advance in nuclear medicine was achieved with the introduction of multi-modality imaging systems including SPECT/computed tomography (CT) and PET/CT. In these systems, the CT images can be used to provide an anatomical context for the functional nuclear medicine images and allow for attenuation compensation. The third section in this chapter provides a discussion of the principles of these devices.

Risk-informed appendices G and E for section XI of the ASME Boiler and Pressure Vessel Code

International Nuclear Information System (INIS)

Carter, B; Spanner, J.; Server, W.; Gamble, R.; Bishop, B.; Palm, N.; Heinecke, C.

2011-01-01

Full text of publication follows: The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, contains two appendices (G and E) related to reactor pressure boundary integrity. Appendix G provides procedures for defining Service Level A and B pressure temperature limits for ferritic components in the reactor coolant pressure boundary. Recently, an alternative risk informed methodology has been developed for ASME Section XI, Appendix G. The alternative methodology provides simple procedures to define risk informed pressure temperature limits for Service Level A and B events, including leak testing and reactor start up and shut down for both pressurized water reactors (PWRs) and boiling water reactors (BWRs). Risk informed pressure temperature limits provide more operational flexibility, particularly for reactor pressure vessels (RPV) with relatively high irradiation levels and radiation sensitive materials. Appendix E of Section XI provides a methodology for assessing conditions when the Appendix G limits are exceeded. A similar risk informed methodology is being considered for Appendix E. The probabilistic fracture mechanics evaluations used to develop the risk informed relationships included appropriate material properties for the range of RPV materials in operating plants in the United States and operating history and system operational constraints in both BWRs and PWRs. The analysis results were used to define pressure temperature relationships that provide an acceptable level of risk, consistent with safety goals defined by the U.S. Nuclear Regulatory Commission. The alternative methodologies for Appendices G and E will provide greater operational flexibility, especially for Service Level A and B events that may adversely affect efficient and safe plant operation, such as low temperature over pressurization for PWRs and BWR leak testing. Overall, application of the risk informed appendices can result in increased plant

Rehabilitación integral y tolerancia al ejercicio físico en escolares asmáticos severos

Directory of Open Access Journals (Sweden)

. Héctor Alejandro Cruz Oliver

1995-04-01

Full Text Available Se realizó un estudio en 99 escolares asmáticos severos, incluidos en un programa de rehabilitación integral en el centro para niños asmáticos de la Ciudad de los Pioneros "José Martí" en Tarará, durante el curso escolar 1991-1992. A todos los escolares se les sometió antes de comenzar el programa, a una prueba de tolerancia al ejercicio físico mediante la carrera libre, y acorde con los resultados de ésta se clasificaron en 2 grupos; grupo I, con asma inducida por el ejercicio (AIE y grupo II, sin AIE. Al finalizar el programa de rehabilitación al grupo I se le sometió nuevamente a la prueba de tolerancia al ejercicio físico. Todos los escolares se evaluaron mediante la espirometría en condiciones basales antes del programa de rehabilitación y al finalizar éste. En 55 escolares (55,5 % se constató la presencia inicial de AIE. Al finalizar el programa de rehabilitación sólo en 23 de ellos se mantuvo este fenómeno. Con excepción de un escolar perteneciente al grupo I el resto de los niños toleraron sin dificultad las actividades físicas programadas. En relación con los parámetros de función respiratoria no se hallaron diferencias significativas en ninguno de ellos, cuando se compararon ambos grupos entre sí antes del programa de rehabilitación, y después de él. Comparando cada grupo consigo mismo sólo se observó un incremento significativo del flujo máximo medio (MMF en ambos grupos, lo que reflejó una disminución del componente obstructivo bronquial periférico.

Nursery management [Chapter 16

Science.gov (United States)

Kim M. Wilkinson

2009-01-01

This handbook provides an overview of the factors that go into starting and operating a native plant nursery. Management includes all aspects of working with plants in all their phases of growth as described in Chapter 3, Crop Planning and Developing Propagation Protocols. Management also includes working with the community; organizing materials and infrastructure;...

Chapter 8. Data Analysis

Science.gov (United States)

Lyman L. McDonald; Christina D. Vojta; Kevin S. McKelvey

2013-01-01

Perhaps the greatest barrier between monitoring and management is data analysis. Data languish in drawers and spreadsheets because those who collect or maintain monitoring data lack training in how to effectively summarize and analyze their findings. This chapter serves as a first step to surmounting that barrier by empowering any monitoring team with the basic...

Quality Management. Chapter 19

Energy Technology Data Exchange (ETDEWEB)

Hiles, P. A. [Glan Clwyd Hospital, Bodelwyddan (United Kingdom); McLean, I. D. [International Atomic Energy Agency, Vienna (Austria); Christofides, S. [New Nicosia General Hospital, Nicosia (Cyprus)

2014-09-15

This chapter introduces the principles and definitions of quality management systems (QMSs) for radiology facilities, to give a framework to assist in the setting up of such systems and to emphasize the role of the medical physicist in this context. While there is a diversity of terms currently in use to describe quality processes both generally and specifically within radiology, there is broad agreement that the effective management of radiation medicine services demands a quality culture that includes a systematic approach to the elements that govern the delivery of that service. Therefore, the concept of quality assurance (QA) within the radiological facility covers, in its widest sense, all those factors that affect the intended outcome, that is, a clinical diagnosis. The medical physicist has an important role in the overall QMS, especially, but not exclusively, with respect to the equipment performance. A worked example of a quality control (QC) programme is included at the end of the chapter, to demonstrate the depth of detail and involvement of the medical physicist.

Instrumentation for Dosimetry. Chapter 21

Energy Technology Data Exchange (ETDEWEB)

Hourdakis, J. C. [Greek Atomic Energy Commission, Athens (Greece); Nowotny, R. [Medical University of Vienna, Vienna (Austria)

2014-09-15

Measurements of absorbed dose (or air kerma) are required in varying situations in diagnostic radiology. The radiation fields vary from plain, slit and even point projection geometry, and may be stationary or moving, including rotational. Owing to the use of low photon energies for these fields, it is important that dosimeters have a satisfactory energy response. In general, the requirements for dosimeter accuracy are less stringent than those in radiation therapy; however, the dose and dose rate measurements cover a large range. Patient dosimetry (see Chapter 22) is a primary responsibility of the medical physicist specializing in diagnostic radiology and is required by legislation in many countries. Dose data are also required in the optimization of examinations for image quality and dose. Radiation measurement is also critical for occupational and public exposure control (see Chapter 24). Dose measurements are essential in acceptance testing and quality control (see Chapter 19). Several types of dosimeter can be used, provided that they have a suitable energy response, but typically, ionization chambers of a few cubic centimetres in volume, or solid state detectors specifically designed for such measurements, are used. If dosimeters are used to make measurements during an examination, they must not interfere with the examination. These devices are also used for determination of the half value layer (HVL). Special types of ionization chamber are employed for computed tomography (CT), mammography and interventional radiology dosimetry.

Relação da medida da amplitude tóraco-abdominal de adolescentes asmáticos e saudáveis com seu desempenho físico

Directory of Open Access Journals (Sweden)

Renata Pedrolongo Basso

Full Text Available OBJETIVOS: Este estudo teve como objetivo verificar as diferenças das amplitudes tóraco-abdominais nos três níveis (axilar, xifoide e abdominal, nos adolescentes asmáticos e nos saudáveis, e compará-las entre eles. Além de relacioná-las com a capacidade de exercício físico. MATERIAIS E MÉTODOS: Foram avaliados 38 adolescentes, na faixa etária dos 11 aos 15 anos, de ambos os sexos, sendo 19 adolescentes asmáticos, que compuseram o grupo asmático (GA, e 19 saudáveis, que compuseram o grupo saudável (GS. Foi preenchida uma ficha de anamnese e realizada a avaliação antropométrica, espirométrica, o teste do degrau de seis minutos (TD6 e a cirtometria, e calculado o índice de amplitude tóraco-abdominal (IA RESULTADOS: Observou-se diferença significativa para IA entre os níveis axilar e abdominal e xifoidiano e abdominal em ambos os grupos. Não houve diferença significativa quanto ao IA entre os grupos. Somente no GA houve correlação positiva do número total de subidas no TD6 com o IA axilar e xifoide. CONCLUSÃO: Para adolescentes com asma intermitente e persistente leve não houve diferença na cirtometria tóraco-abdominal quando comparados aos saudáveis e houve correlação dos IA axilar e xifoidiano com o desempenho físico no TD6.

Radiation biology. Chapter 20

Energy Technology Data Exchange (ETDEWEB)

Wondergem, J. [International Atomic Energy Agency, Vienna (Austria)

2014-09-15

Radiation biology (radiobiology) is the study of the action of ionizing radiations on living matter. This chapter gives an overview of the biological effects of ionizing radiation and discusses the physical, chemical and biological variables that affect dose response at the cellular, tissue and whole body levels at doses and dose rates relevant to diagnostic radiology.

Water resources (Chapter 12)

Science.gov (United States)

Thomas C. Brown; Romano Foti; Jorge Ramirez

2012-01-01

In this chapter, we focus on the vulnerability of U.S. freshwater supplies considering all lands, not just forest and rangelands. We do not assess the condition of those lands or report on how much of our water supply originates on lands of different land covers or ownerships, because earlier Resources Planning Act (RPA) Assessment work addressed these topics....

Comparisons of ASME-code fatigue-evaluation methods for nuclear Class 1 piping with Class 2 or 3 piping

International Nuclear Information System (INIS)

Rodabaugh, E.C.

1983-06-01

The fatigue evaluation procedure used in the ASME Boiler and Pressure Vessel Code, Sect. III, Nuclear Power Plant Components, for Class 1 piping is different from the procedure used for Class 2 or 3 piping. The basis for each procedure is described, and correlations between the two procedures are presented. Conditions under which either procedure or both may be unconservative are noted. Potential changes in the Class 2 or 3 piping procedure to explicitly cover all loadings are discussed. However, the report is intended to be informative, and while the contents of the report may guide future Code changes, specific recommendations are not given herein

Chapter 8. Ionisation radiation and human organism. Radioactivity of human tissues

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with ionisation radiation and human organism as well as with radioactivity of human tissues. Chapter consists of next parts: (1) Radiation stress of human organism; (2) Radioactivity of human tissues and the factors influencing radioactive contamination; (3) Possibilities of decreasing of radiation stress

[Cardiac Synchronization Function Estimation Based on ASM Level Set Segmentation Method].

Science.gov (United States)

Zhang, Yaonan; Gao, Yuan; Tang, Liang; He, Ying; Zhang, Huie

At present, there is no accurate and quantitative methods for the determination of cardiac mechanical synchronism, and quantitative determination of the synchronization function of the four cardiac cavities with medical images has a great clinical value. This paper uses the whole heart ultrasound image sequence, and segments the left & right atriums and left & right ventricles of each frame. After the segmentation, the number of pixels in each cavity and in each frame is recorded, and the areas of the four cavities of the image sequence are therefore obtained. The area change curves of the four cavities are further extracted, and the synchronous information of the four cavities is obtained. Because of the low SNR of Ultrasound images, the boundary lines of cardiac cavities are vague, so the extraction of cardiac contours is still a challenging problem. Therefore, the ASM model information is added to the traditional level set method to force the curve evolution process. According to the experimental results, the improved method improves the accuracy of the segmentation. Furthermore, based on the ventricular segmentation, the right and left ventricular systolic functions are evaluated, mainly according to the area changes. The synchronization of the four cavities of the heart is estimated based on the area changes and the volume changes.

Assessing the Multiple Benefits of Clean Energy Chapter 1: Introduction

Science.gov (United States)

Chapter 1 of “Assessing the Multiple Benefits of Clean Energy” provides an introduction to the document. /meta name=DC.title content=Assessing the Multiple Benefits of Clean Energy Chapter 1: Introduction

Chapter 2: Irradiators

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter 2 presents the subjects: 1) gamma irradiators which includes: Category-I gamma irradiators (self-contained); Category-II gamma irradiators (panoramic and dry storage); Category-III gamma irradiators (self-contained in water); Category-IV gamma irradiators (panoramic and wet storage); source rack for Category-IV gamma irradiators; product transport system for Category-IV gamma irradiators; radiation shield for gamma irradiators; 2) accelerators which includes: Category-I Accelerators (shielded irradiator); Category-II Accelerators (irradiator inside a shielded room); Irradiation application examples.

Effects of diurnal variations in temperature on non-accidental mortality among the elderly population of Montreal, Québec, 1984-2007.

Science.gov (United States)

Vutcovici, Maria; Goldberg, Mark S; Valois, Marie-France

2014-07-01

The association between ambient temperature and mortality has been studied extensively. Recent data suggest an independent role of diurnal temperature variations in increasing daily mortality. Elderly adults-a growing subgroup of the population in developed countries-may be more susceptible to the effects of temperature variations. The aim of this study was to determine whether variations in diurnal temperature were associated with daily non-accidental mortality among residents of Montreal, Québec, who were 65 years of age and over during the period between 1984 and 2007. We used distributed lag non-linear Poisson models constrained over a 30-day lag period, adjusted for temporal trends, mean daily temperature, and mean daily concentrations of nitrogen dioxide and ozone to estimate changes in daily mortality with diurnal temperature. We found, over the 30 day lag period, a cumulative increase in daily mortality of 5.12% [95% confidence interval (CI): 0.02-10.49%] for a change from 5.9 °C to 11.1 °C (25th to 75th percentiles) in diurnal temperature, and a 11.27% (95%CI: 2.08-21.29%) increase in mortality associated with an increase of diurnal temperature from 11.1 to 17.5 °C (75th to 99th percentiles). The results were relatively robust to adjustment for daily mean temperature. We found that, in Montreal, diurnal variations in temperature are associated with a small increase in non-accidental mortality among the elderly population. More studies are needed in different geographical locations to confirm this effect.

Management of Therapy Patients. Chapter 20

Energy Technology Data Exchange (ETDEWEB)

Dauer, L. T. [Department of Medical Physics, Memorial Sloan Kettering Cancer Center, New York (United States)

2014-12-15

The basic principles of radiation protection and their implementation as they apply to nuclear medicine are covered in general in Chapter 3. This chapter will look at the specific case of nuclear medicine used for therapy. In addition to the standards discussed in Chapter 3, specific guidance on the release of patients after radionuclide therapy can be found in the IAEA’s Safety Reports Series No. 63 [20.1]. When the patient is kept in hospital following radionuclide therapy, the people at risk of exposure include hospital staff whose duties may or may not directly involve the use of radiation. This can be a significant problem. However, it is generally felt that it can be effectively managed with well trained staff and appropriate facilities. On the other hand, once the patient has been released, the groups at risk include members of the patient’s family, including children, and carers; they may also include neighbours, visitors to the household, co-workers, those encountered in public places, on public transport or at public events, and finally, the general public. It is generally felt that these risks can be effectively mitigated by the radiation protection officer (RPO) with patient-specific radiation safety precaution instructions.

Technical basis for the extension of ASME Code Case N-494 for assessment of austenitic piping

International Nuclear Information System (INIS)

Bloom, J.M.

1995-01-01

In 1990, the ASME Boiler and Pressure Vessel Code for Nuclear Components approved Code Case N-494 as an alternative procedure for evaluating laws in Light Water Reactor alterative procedure for evaluating flaws in Light Water Reactor (LWR) ferritic piping. The approach is an alternative to Appendix H of the ASME Code and alloys the user to remove some unnecessary conservatism in the existing procedure by allowing the use of pipe specific material properties. The Code Case is an implementation of the methodology of the Deformation Plasticity Failure Assessment diagram (DPFAD). The key ingredient in the application of DPFAD is that the material stress-strain curve must be in the format of a simple power law hardening stress-strain curve such as the Ramberg-Osgood (R-O) model. Ferritic materials can be accurately fit by the R-O model and, therefore, it was natural to use the DPFAD methodology for the assessment of LWR ferritic piping. An extension of Code Case N-494 to austenitic piping required a modification of the existing DPFAD methodology. The Code Case N-494 approach was revised using the PWFAD procedure in the same manner as in the development of the original N-494 approach for ferritic materials. A lower bound stress-strain curve was used to generate a PWFAD curve for the geometry of a part-through wall circumferential flaw in a cylinder under tension. Earlier work demonstrated that a cylinder under axial tension with a 50% flaw depth, 90 degrees in circumference, and radius to thickness of 10, produced a lower bound FAD curve. Validation of the new proposed Code Case procedure for austenitic piping was performed using actual pipe test data. Using the lower bound PWFAD curve, pipe test results were conservatively predicted. The resultant development of ht PWFAD curve for austenitic piping led to a revision of Code Case N-494 to include a procedure for assessment of flaws in austenitic piping

The application of RCM to ASME code requirements for in-service testing

International Nuclear Information System (INIS)

Rowley, C.W.

1990-01-01

This paper reports that the high reliability of nuclear power plant systems and components is highly important for both nuclear safety and electrical power production economics. The optimum operating performance of these plant systems and components is heavily dependent on the original or modified design for its inherent reliability and the appropriate trade-off in preventive and corrective maintenance for its developed reliability. In developing this optimum operating performance goal, the plant staff could rely solely on the experience of its personnel. However using this internal subjective approach, the average nuclear power availability has been far less than 80%. Obviously the production economics of a nuclear power plant is the province of the owner-operator, but the safety system and component performance impacts the entire industry. Hence the nuclear industry needs to have in-service testing requirements that maintain the necessary safety standards. Historically the ASME Inservice Testing Code has been a vehicle for defining some of those necessary safety standards, such as inservice testing of pumps, valves, and snubbers. The nuclear industry needs to expand the code testing to include all the systems that affect these necessary safety standards

Interim status report on the revision of ASME PTC 12.1 -- closed feedwater heaters

International Nuclear Information System (INIS)

Stellern, J.L.; Hoobler, J.V.; Milton, J.W.; Welch, T.; Kona, C.; Thompson, H.N.; Tsou, J.L.

1993-01-01

The ASME Performance Test Code (PTC) 12.1-1978 for the performance testing of feedwater heaters is being revised extensively and updated. The committee anticipates that the final draft of the proposed Code will be ready for industry review in 1993. This Code revision will greatly enhance the usefulness and cost effectiveness of feedwater heater performance testing. This paper has been prepared to report on the progress of the committee and to disseminate information on the nature of the revision. Included in this paper are some of the notable changes intended for the Code. The most extensive change is the calculation method, which is described in step-by-step detail. An approach is also described for using ultrasonic flow techniques to test individual or split-string feedwater heaters, when flow nozzles are not available. Additionally some educational information on the use and limitations of ultrasonic measurement instrumentation is included. Discussion is also included on the required uncertainty analysis. 3 refs., 2 figs., 2 tabs

Proposed recommendations for the reform of chapter 11 U.S. Bankruptcy Code

NARCIS (Netherlands)

Wessels, B.; de Weijs, R.

2015-01-01

The US Bankruptcy Code’s chapter 11 procedure is both in practice and conceptually the most important insolvency procedure worldwide. Many countries, including the Netherlands, look at Chapter 11 for inspiration in revising their own insolvency laws. Chapter 11 is, however, itself up for revision.

Energy and wastes. Chapter 1

International Nuclear Information System (INIS)

2002-01-01

In the Chapter 1 'Energy and wastes' it is shown the wastes generation inevitability at power production, because there are no absolutely wasteless technologies. After energy production technologies analysis the data that nuclear energy is most ecologically acceptable at maintenance related radiation safety measures

Average number of compressors in operation per day in 25 skating rinks of the City of Montreal; Nombre moyens de compresseurs par jour en fonction dans 25 arenas de la Ville de Montreal

Energy Technology Data Exchange (ETDEWEB)

Dumas, C. [Ville de Montreal, PQ (Canada). Direction des Immeubles Gestion de l' Energie et du Genie Climatique

2002-09-30

Since the summer of 2001, 25 skating rinks from the territory of the old City of Montreal have been linked through a network to the remote management system. This initiative enables the people responsible for the skating rink to easily obtain statistics on the operation of refrigeration systems and to compile this information in the memory of a personal computer (PC). Each compressor system is equipped with a current transformer which acts as proof of monitored operation by the remote management system. Every minute, the compressors are asked in sequence to report on their status. The process by which the data is entered, filtered and analysed was explained and an example provided to better illustrate the concept. As a rule, management believes that it is possible to lower the power of existing refrigeration systems and to select new refrigeration systems according to the data acquired. Based on the results obtained so far, the power of some of the refrigeration systems has already been reduced by letting go one or two of the six refrigeration circuits of a skating rink. 2 tabs.

Anti-CTGF single-chain variable fragment dimers inhibit human airway smooth muscle (ASM) cell proliferation by down-regulating p-Akt and p-mTOR levels.

Science.gov (United States)

Gao, Wei; Cai, Liting; Xu, Xudong; Fan, Juxiang; Xue, Xiulei; Yan, Xuejiao; Qu, Qinrong; Wang, Xihua; Zhang, Chen; Wu, Guoqiu

2014-01-01

Connective tissue growth factor (CTGF) contributes to airway smooth muscle (ASM) cell hyperplasia in asthma. Humanized single-chain variable fragment antibody (scFv) was well characterized as a CTGF antagonist in the differentiation of fibroblast into myofibroblast and pulmonary fibrosis in our previous studies. To further improve the bioactivity of scFv, we constructed a plasmid to express scFv-linker-matrilin-6×His fusion proteins that could self-assemble into the scFv dimers by disulfide bonds in matrilin under non-reducing conditions. An immunoreactivity assay demonstrated that the scFv dimer could highly bind to CTGF in a concentration-dependent manner. The MTT and EdU assay results revealed that CTGF (≥10 ng/mL) promoted the proliferation of ASM cells, and this effect was inhibited when the cells were treated with anti-CTGF scFv dimer. The western blot analysis results showed that increased phosphorylation of Akt and mTOR induced by CTGF could be suppressed by this scFv dimer. Based on these findings, anti-CTGF scFv dimer may be a potential agent for the prevention of airway remodeling in asthma.

ITER's Tokamak Cooling Water System and the the Use of ASME Codes to Comply with French Regulations of Nuclear Pressure Equipment

International Nuclear Information System (INIS)

Berry, Jan; Ferrada, Juan J.; Curd, Warren; Dell Orco, Giovanni; Barabash, Vladimir; Kim, Seokho H.

2011-01-01

During inductive plasma operation of ITER, fusion power will reach 500 MW with an energy multiplication factor of 10. The heat will be transferred by the Tokamak Cooling Water System (TCWS) to the environment using the secondary cooling system. Plasma operations are inherently safe even under the most severe postulated accident condition a large, in-vessel break that results in a loss-of-coolant accident. A functioning cooling water system is not required to ensure safe shutdown. Even though ITER is inherently safe, TCWS equipment (e.g., heat exchangers, piping, pressurizers) are classified as safety important components. This is because the water is predicted to contain low-levels of radionuclides (e.g., activated corrosion products, tritium) with activity levels high enough to require the design of components to be in accordance with French regulations for nuclear pressure equipment, i.e., the French Order dated 12 December 2005 (ESPN). ESPN has extended the practical application of the methodology established by the Pressure Equipment Directive (97/23/EC) to nuclear pressure equipment, under French Decree 99-1046 dated 13 December 1999, and Order dated 21 December 1999 (ESP). ASME codes and supplementary analyses (e.g., Failure Modes and Effects Analysis) will be used to demonstrate that the TCWS equipment meets these essential safety requirements. TCWS is being designed to provide not only cooling, with a capacity of approximately 1 GW energy removal, but also elevated temperature baking of first-wall/blanket, vacuum vessel, and divertor. Additional TCWS functions include chemical control of water, draining and drying for maintenance, and facilitation of leak detection/localization. The TCWS interfaces with the majority of ITER systems, including the secondary cooling system. U.S. ITER is responsible for design, engineering, and procurement of the TCWS with industry support from an Engineering Services Organization (ESO) (AREVA Federal Services, with support

ASME Section XI trends in developing nuclear codes and standards

International Nuclear Information System (INIS)

Hedden, O.F.

1995-01-01

When the author began working on nuclear power many years ago, he knew that perfection was the only acceptable technical standard. Unfortunately, this became an obsession with perfection that has had unfavorable consequences in some of the non-technical areas of work in ASME nuclear power Codes and Standards. However, the economic problems of the nuclear power industry now demand a more pragmatic approach if the industry is to continue. Not only does each item considered for action need to be evaluated to criteria that may in some cases be less than perfection, but one needs to consider whether it contributes tangibly to either safety or to reduction in technical or administrative burden. These should be the governing, criteria. The introduction of risk-based inspection methodologies will certainly be an important element in doing this successfully. One needs to consider these criteria collectively, as one discusses each item at the committee level, and individually, as one votes on each item. In the past, the author has been concerned that the industry was not acting quickly enough in taking advantage of opportunities offered by the Code to increase safety or to reduce cost. While he still has some concern, he thinks communication channels have been greatly improved. Now he is becoming more concerned with both the collective and individual actions that delay beneficial changes. The second part of the author's talk has to do with the relevance of the code committees in the nuclear power industry regulatory process

Behavioral service substitution (Chapter 9)

NARCIS (Netherlands)

Stahl, C.; Aalst, van der W.M.P.; Bouguettaya, A.; Sheng, Q.Z.; Daniel, F.

2014-01-01

Service-oriented design supports system evolution and encourages reuse and modularization. A key ingredient of service orientation is the ability to substitute one service by another without reconfiguring the overall system. This chapter aims to give an overview of the state of the art and open

Telemetry Standards, IRIG Standard 106-17, Chapter 22, Network Based Protocol Suite

Science.gov (United States)

2017-07-01

requirements. 22.2 Network Access Layer 22.2.1 Physical Layer Connectors and cable media should meet the electrical or optical properties required by the...Telemetry Standards, IRIG Standard 106-17 Chapter 22, July 2017 i CHAPTER 22 Network -Based Protocol Suite Acronyms...iii Chapter 22. Network -Based Protocol Suite

Mirror Lake: Past, present and future: Chapter 6

Science.gov (United States)

Likens, Gene E.; LaBaugh, James W.; Winter, Thomas C.; Likens, Gene E.

2009-01-01

This chapter discusses the hydrological and biogeochemical characteristics of Mirror Lake and the changes that resulted from air-land-water interactions and human activities. Since the formation of Mirror Lake, both the watershed and the lake have undergone many changes, such as vegetation development and basin filling. These changes are ongoing, and Mirror Lake is continuing along an aging pathway and ultimately, it will fill with sediment and no longer be a lake. The chapter also identifies major factors that affected the hydrology and biogeochemistry of Mirror Lake: acid rain, atmospheric deposition of lead and other heavy metals, increased human settlement around the lake, the construction of an interstate highway through the watershed of the Northeast Tributary, the construction of an access road through the West and Northeast watersheds to the lake, and climate change. The chapter also offers future recommendations for management and protection of Mirror Lake.

Chemical Tracer Methods: Chapter 7

Science.gov (United States)

Healy, Richard W.

2017-01-01

Tracers have a wide variety of uses in hydrologic studies: providing quantitative or qualitative estimates of recharge, identifying sources of recharge, providing information on velocities and travel times of water movement, assessing the importance of preferential flow paths, providing information on hydrodynamic dispersion, and providing data for calibration of water flow and solute-transport models (Walker, 1998; Cook and Herczeg, 2000; Scanlon et al., 2002b). Tracers generally are ions, isotopes, or gases that move with water and that can be detected in the atmosphere, in surface waters, and in the subsurface. Heat also is transported by water; therefore, temperatures can be used to trace water movement. This chapter focuses on the use of chemical and isotopic tracers in the subsurface to estimate recharge. Tracer use in surface-water studies to determine groundwater discharge to streams is addressed in Chapter 4; the use of temperature as a tracer is described in Chapter 8.Following the nomenclature of Scanlon et al. (2002b), tracers are grouped into three categories: natural environmental tracers, historical tracers, and applied tracers. Natural environmental tracers are those that are transported to or created within the atmosphere under natural processes; these tracers are carried to the Earth’s surface as wet or dry atmospheric deposition. The most commonly used natural environmental tracer is chloride (Cl) (Allison and Hughes, 1978). Ocean water, through the process of evaporation, is the primary source of atmospheric Cl. Other tracers in this category include chlorine-36 (36Cl) and tritium (3H); these two isotopes are produced naturally in the Earth’s atmosphere; however, there are additional anthropogenic sources of them.

Chapter 13. Exploring Use of the Reserved Core

Energy Technology Data Exchange (ETDEWEB)

Holmen, John [Univ. of Utah, Salt Lake City, UT (United States). SCI Inst. and School of Computing; Humphrey, Alan [Univ. of Utah, Salt Lake City, UT (United States). SCI Inst. and School of Computing; Berzins, Martin [Univ. of Utah, Salt Lake City, UT (United States). SCI Inst. and School of Computing

2015-07-29

In this chapter, we illustrate benefits of thinking in terms of thread management techniques when using a centralized scheduler model along with interoperability of MPI and PThread. This is facilitated through an exploration of thread placement strategies for an algorithm modeling radiative heat transfer with special attention to the 61st core. This algorithm plays a key role within the Uintah Computational Framework (UCF) and current efforts taking place at the University of Utah to model next-generation, large-scale clean coal boilers. In such simulations, this algorithm models the dominant form of heat transfer and consumes a large portion of compute time. Exemplified by a real-world example, this chapter presents our early efforts in porting a key portion of a scalability-centric codebase to the Intel Xeon Phi coprocessor. Specifically, this chapter presents results from our experiments profiling the native execution of a reverse Monte-Carlo ray tracing-based radiation model on a single coprocessor. These results demonstrate that our fastest run configurations utilized the 61st core and that performance was not profoundly impacted when explicitly oversubscribing the coprocessor operating system thread. Additionally, this chapter presents a portion of radiation model source code, a MIC-centric UCF cross-compilation example, and less conventional thread management technique for developers utilizing the PThreads threading model.

Chapter 6: The scientific basis for conserving forest carnivores: considerations for management

Science.gov (United States)

L. Jack Lyon; Keith B. Aubry; William J. Zielinski; Steven W. Buskirk; Leonard F. Ruggiero

1994-01-01

The reviews presented in previous chapters reveal substantial gaps in our knowledge about marten, fisher, lynx, and wolverine. These gaps severely constrain our ability to design reliable conservation strategies. This problem will be explored in depth in Chapter 7. In this chapter, our objective is to discuss management considerations resulting from what we currently...

Chapter 5: Monitoring results

DEFF Research Database (Denmark)

Poel, Bart; Thomsen, Kirsten Engelund; Schultz, Jørgen Munthe

2003-01-01

The monitoring results from the IEA Task 13 project "Advanced solar low energy houses" are described in this chapter. The underlying information was collected in the form of questionnaires. The questionnaires were formulated in such a way that participants are provided with a uniform lay......-out to fill in their particular results. Thus it is possible to compare the performances measured, calculated or predicted for the different houses....

Screening of cognitive impairment in patients with Parkinson's disease: diagnostic validity of the Brazilian versions of the Montreal Cognitive Assessment and the Addenbrooke's Cognitive Examination-Revised

OpenAIRE

Emmanuelle Sobreira; Márcio A. Pena-Pereira; Alan L. Eckeli; Manoel A. Sobreira-Neto; Marcos H. N. Chagas; Maria P. Foss; Brenna Cholerton; Cyrus P. Zabetian; Ignacio F. Mata; Vitor Tumas

2015-01-01

ABSTRACTObjective The aim of the present study is to examine the accuracy of the Brazilian versions of the Montreal Cognitive Assessment (MoCA) and the Addenbrooke's Cognitive Examination-Revised (ACE-R) to screen for mild cognitive impairment (PDMCI) and dementia (PDD) in patients with Parkinson's disease (PD).Method Both scales were administered to a final convenience sample of 79 patients with PD. Patients were evaluated by a neurologist, a psychiatrist and a neuropsychologist using UPDRS,...

The systemic family assessment system: its validity with asthmatic children and their families Evaluación familiar sistémica: su validez con niños asmáticos y sus familias Avaliação familiar sistêmica: sua validade com crianças asmáticas e suas famílias

Directory of Open Access Journals (Sweden)

Dóris Lieth Peçanha

2007-12-01

Full Text Available The construct and concurrent validity of the Systemic Family Assessment (SFA system was tested. Participants were 11 asthmatic and 14 healthy Brazilian children (aged 5 to 9 along with their intact families. Measures included the SFA, the Family Colored Drawing Test with children (FCDT, and a semi-structured interview with parents (PI. Comparisons between families of asthmatic and healthy children yielded significant differences for all family dimensions of the SFA. The most affected dimensions for families of asthmatic children were the individuation process within the family, family conflicts, family integration and cohesion, roles, and quality of leadership within the family. Significative correlation between the SFA and the two independent measures were found. Results support the construct and concurrent validity of the SFA.La validez de constructo y la validad coexistente do protocolo de Evaluación Familiar Sistémica (EFS fue establecida. El estudio fue realizado en Brasil con familias intactas, y observó 11 niños con asma y 14 saludables, con edades de 5 a 9 años. Las medidas analizadas incluyeron el EFS, el Test del Dibujo Coloreado de la Familia aplicado a los niños (TDCF, y una entrevista semi-estructurada aplicada a los padres (EP. Las comparaciones entre las familias de niños asmáticos y saludables apuntaron diferencias significativas en todas las dimensiones familiares de la EFS. En las familias de niños asmáticos las dimensiones más afectadas fueron el proceso de la individuación dentro de la familia, los conflictos familiares, la integración familiar y la cohesión, los papeles y la calidad de liderazgo dentro de la familia. Se encontró una correlación significativa entre el EFS y las dos medidas independientes. Los resultados prueban la validez del constructo y la validad coexistente del EFS.Foi testada a validade de construto e a validade concorrente do protocolo de Avaliação Familiar Sistêmica (AFS. Os

A Novel Approach to Adaptive Flow Separation Control

Science.gov (United States)

2016-09-03

Artificial Intelligence ( ) TOTAL: 1 Books Number of Manuscripts: Patents Submitted Patents Awarded Awards Graduate Students Names of Post Doctorates...Education, February 2015. ASME Fellow, April 2013. Received Book TOTAL: Received Book Chapter TOTAL: PERCENT_SUPPORTEDNAME FTE Equivalent: Total Number...and other fields such as power system control and automotive engine tuning. References 1. B. Reese, F. Alvi, and E. G. Collins, “A

Basic Radiation Detectors. Chapter 6

Energy Technology Data Exchange (ETDEWEB)

Van Eijk, C. W.E. [Faculty of Applied Sciences, Delft University of Technology, Delft (Netherlands)

2014-12-15

Radiation detectors are of paramount importance in nuclear medicine. The detectors provide a wide range of information including the radiation dose of a laboratory worker and the positron emission tomography (PET) image of a patient. Consequently, detectors with strongly differing specifications are used. In this chapter, general aspects of detectors are discussed.

Chapter 3: Traceability and uncertainty

International Nuclear Information System (INIS)

McEwen, Malcolm

2014-01-01

Chapter 3 presents: an introduction; Traceability (measurement standard, role of the Bureau International des Poids et Mesures, Secondary Standards Laboratories, documentary standards and traceability as process review); Uncertainty (Example 1 - Measurement, M raw (SSD), Example 2 - Calibration data, N D.w 60 Co, kQ, Example 3 - Correction factor, P TP ) and Conclusion

9 July 2012 - Academy of Sciences Malaysia (ASM), Chairman, Mathematical and Physical Sciences Discipline Group M. Yahaya FASc and his delegation visiting the LHC superconducting magnet test hall with Technology Department G. De Rijk.

CERN Multimedia

Maximilien Brice

2012-01-01

9 July 2012 - Academy of Sciences Malaysia (ASM), Chairman, Mathematical and Physical Sciences Discipline Group M. Yahaya FASc and his delegation visiting the LHC superconducting magnet test hall with Technology Department G. De Rijk.

The reinvigorated South African GRSS Chapter

CSIR Research Space (South Africa)

Schwegmann, Colin P

2017-09-01

Full Text Available Looking ahead, the South African GRSS Chapter is investigating the possibility of organizing a meeting with local GRSS members, universities, and other remote-sensing organizations with the purpose of engaging undergraduate and early postgraduate...

Emergy Evaluation of Dwelling Operation in Five Housing Units of Montreal Island, Canada

Directory of Open Access Journals (Sweden)

Ricardo Enrique Vega-Azamar

2017-04-01

Full Text Available Sustainability of cities and the environmental implications of high resource utilization by the domestic sector are growing concerns related to urban regions. Well-informed urban planning decision-making is an essential tool to help in the task and, for that, an important point to consider is the influence of parameters like residential density and housing typology on the intensity of resource utilization. Emergy synthesis, a life-cycle energy analysis methodological approach that considers the interaction of natural and human-made flows, was used to evaluate the environmental support for dwelling operational stage in five typical present-day housing units on the island of Montreal. As expected, resource utilization, measured as total emergy used, was positively correlated to housing unit size both with respect to number of occupants and dwelling size. Results suggest that variables affecting notably the intensity of resource utilization are per household income and per dweller habitable space and, while a higher income increased per capita emergy in all cases, increasing space availability per resident did not result in a decrease of empower density after 50 m2/person. Future work should consider lower and higher densities and analyses at the scale of blocks, neighborhoods and urban planning zones.

Increased Arctic Deposition of Persistent Compounds as a Result of the Montreal Protocol

Science.gov (United States)

Young, C.; Pickard, H. M.; De Silva, A. O.; Spencer, C.; Criscitiello, A. S.; Muir, D.; Sharp, M. J.

2017-12-01

Perfluorocarboxylic acids (PFCAs) are among the diverse groups of compounds characterized as persistent organic pollutants. They are toxic, resistant to environmental degradation, and adversely impact human and environmental health. PFCAs with four or fewer carbons, short-chain PFCAs (scPFCAs), are of particular interest because of their increasing levels in the environment, toxicity to plants, and potential for accumulation in some aquatic ecosystems, making them an emerging environmental concern. A minor source of scPFCAs to the Arctic has been shown to be atmospheric transformation of fluoropolymer precursors, followed by deposition. Additional potential sources of scPFCAs to the Arctic are chlorofluorocarbon (CFC)-replacement compounds. Through analysis of an ice core from the Canadian High Arctic, we show that Montreal Protocol-mandated introduction of CFC-replacement compounds for the heat-transfer industry has led to increasing inputs of these scPFCAs to the remote environment. Flux measurements for scPFCAs as a class of contaminants have only been reported in a couple studies to date. Here, we provide the first multi-decadal temporal record of scPFCA deposition, demonstrating a dramatic increase in deposition resulting from emission of CFC-replacements. These results bring to the forefront a need for a holistic approach to environmental risk assessment that considers impacts of replacement substances and degradation products.

SCREENING FOR POSTSTROKE COGNITIVE IMPAIRMENT VIA MINI MENTAL STATE EXAMINATION AND MONTREAL COGNITIVE ASSESSMENT SCALE

Directory of Open Access Journals (Sweden)

Mirena Valkova

2012-10-01

Full Text Available Objective: The aim of our study is to examine cognitive performance after mild stroke via Mini Mental State Examination (MMSE and Montreal cognitive assessment scale (MoCA and to compare the results.Material and methods: We examined 54 patients with mild stroke (aged 52 to 72 (mean 63.17, SD 5.96; 34 males and 20 females and 54 controls, adjusted by age, sex and education level. All subjects were tested via MMSE (Bulgarian version and MoCa (Bulgarian version. Data was collected in the single step model at the 90th day after stroke incident for patients and at the day of obtaining informed consent for controls. Results: Patients have poorer performance on both MMSE and MoCa than controls. MoCa has comparatively good discriminative validity and sensitivity.Conclusions: Although MMSE is one of the classical screening tools for cognitive impairment widely used in Bulgaria, other screening tools should not be ignored. On the basis of our results, MoCa is also a good screening instrument, especially for poststroke cognitive impairment.

Probing the mysteries of the X-ray binary 4U 1210-64 with ASM, PCA, MAXI, BAT, and Suzaku

Energy Technology Data Exchange (ETDEWEB)

Coley, Joel B.; Corbet, Robin H. D.; Mukai, Koji; Pottschmidt, Katja, E-mail: jcoley1@umbc.edu [University of Maryland Baltimore County, 1000 Hilltop Cir, Baltimore, MD 21250 (United States)

2014-10-01

4U 1210-64 has been postulated to be a high-mass X-ray binary powered by the Be mechanism. X-ray observations with Suzaku, the ISS Monitor of All-sky X-ray Image (MAXI), and the Rossi X-ray Timing Explorer Proportional Counter Array (PCA) and All Sky Monitor (ASM) provide detailed temporal and spectral information on this poorly understood source. Long-term ASM and MAXI observations show distinct high and low states and the presence of a 6.7101 ± 0.0005 day modulation, interpreted as the orbital period. Folded light curves reveal a sharp dip, interpreted as an eclipse. To determine the nature of the mass donor, the predicted eclipse half-angle was calculated as a function of inclination angle for several stellar spectral types. The eclipse half-angle is not consistent with a mass donor of spectral type B5 V; however, stars with spectral types B0 V or B0-5 III are possible. The best-fit spectral model consists of a power law with index Γ = 1.85{sub −0.05}{sup +0.04} and a high-energy cutoff at 5.5 ± 0.2 keV modified by an absorber that fully covers the source as well as partially covering absorption. Emission lines from S XVI Kα, Fe Kα, Fe XXV Kα, and Fe XXVI Kα were observed in the Suzaku spectra. Out of eclipse, the Fe Kα line flux was strongly correlated with unabsorbed continuum flux, indicating that the Fe I emission is the result of fluorescence of cold dense material near the compact object. The Fe I feature is not detected during eclipse, further supporting an origin close to the compact object.

Fatores de risco para consultas em pronto-socorro por crianças asmáticas no Sul do Brasil

Directory of Open Access Journals (Sweden)

Chatkin Moema

2000-01-01

Full Text Available OBJETIVOS: Traçar um perfil das crianças asmáticas do município de Pelotas, RS, conhecer o manejo da doença e os fatores de risco associados a consultas em pronto-socorro, motivadas por asma. MÉTODOS: Estudo transversal aninhado a um estudo de coorte, realizado na área urbana de Pelotas, cidade de médio porte do Sul do Brasil. Participaram 981 crianças de 4-5 anos, pertencentes à coorte de 1993. RESULTADOS: A prevalência de asma encontrada na amostra estudada foi de 25,4%. A morbidade por asma foi elevada: 31% das crianças asmáticas haviam procurado o pronto-socorro no último ano, 57% tinham consultado médico e 26%, de 1 a 4 anos, foram internadas por asma. Na análise geral, escolaridade e renda familiar baixas associaram-se com consultas em pronto-socorro (RO=4,1 para 0 a 4 anos de escolaridade e RO=6,5 para menos de 1 salário-mínimo. Dormir em quartos com 3 ou mais pessoas também mostrou-se associado (RO=2,2, bem como severidade das crises (RO=2,7, uso de medicamentos para asma no último ano (RO=1,9 e internações por asma (RO=3,0. CONCLUSÕES: A prevalência de asma entre crianças pré-escolares em Pelotas é alta, levando a grande morbidade. Encontraram-se como fatores preditores de consultas em pronto-socorro por asma, após análise multivariada, a baixa escolaridade das mães, severidade das crises e internação por asma.

Development of the present reference fracture toughness curves in the ASME nuclear code

International Nuclear Information System (INIS)

Yukawa, S.; Merkle, J.G.

1984-01-01

Since the early 1970's, the Sections of the ASME Boiler and Pressure Vessel Code concerned with nuclear power plant components have included fracture mechanics procedures to analyze the effects of postulated or detected flaws. These procedures are contained in Appendix G of Section III and in Appendix A of Section XI of the Code. Specifically, Appendix G procedures are concerned with designing for protection against nonductile failures while Appendix A procedures are for evaluating the disposition of flaws detected during in-service inspection. An important element of the procedures is the inclusion of recommended material fracture toughness values. This paper describes the origin and development of these recommended fracture toughness values. Since these values appear in the Code in a graphical format, the values are often referred to as reference toughness curves. In the context of Code terminology, reference toughness means the allowable values of fracture toughness for the materials of concern that can be used in conjunction with the analytical procedures of Appendices G and A. The paper discusses the basis and rationale underlying the original formulation of these reference toughness curves and the modifications incorporated into them in the course of their adoption into the Code

Granulomatose broncocêntrica idiopática em jovem não asmática

Directory of Open Access Journals (Sweden)

Santos José Wellington Alves dos

2003-01-01

Full Text Available Granulomatose broncocêntrica é um achado histopatológico descritivo, caracterizado pela inflamação granulomatosa necrosante, centrada em brônquios e bronquíolos, e que ocorre associada a doenças infecciosas, imunológicas e neoplásicas, ou de forma idiopática. Este trabalho relata o caso de uma jovem não asmática de 26 anos com dor torácica, febre e tosse produtiva havia um mês, que apresentou consolidação e cavitação em segmento lingular, observadas na radiografia e na tomografia computadorizada de tórax. Punção aspirativa transbrônquica evidenciou lesão inflamatória inespecífica, sem etiologia identificada. O exame histológico de material obtido por biópsia pulmonar a céu aberto foi compatível com granulomatose broncocêntrica idiopática. Após tratamento com prednisona, houve melhora clínica, sem recidivas.

Interface entre a natação e o tratamento da asma sob a perspectiva do paciente asmático

Directory of Open Access Journals (Sweden)

João Lucas Pinto Matias

2017-10-01

Full Text Available Objetivo: analisar a interface entre a natação e o tratamento da asma sob a perspectiva do praticante asmático. Método: trata-se de pesquisa qualitativa, realizada com cinco crianças e adolescentes, praticantes de natação. Foi utilizada como técnica de construção das informações empíricas a entrevista semiestruturada e, para análise das informações, a análise de conteúdo do tipo análise temática, em que emergiram dois núcleos de sentido: descoberta e percepção da doença e relação entre o tratamento da asma e a natação. Resultados: o reconhecimento do exercício físico como possível agravo da asma existe há décadas, todavia, há igual período de tempo se reconhece que o exercício físico regular e planejado torna-se um fator redutivo da frequência das crises asmáticas. O tratamento da asma para os sujeitos vem como algo substancial e, quando atrelado à prática esportiva, mais especificamente a natação, torna-se um eficiente manejo na trajetória fisiopatológica. Considerações finais: a asma tem sido um fator importante para adesão e manutenção na natação e que, de acordo com os participantes, a sua prática tem melhorado em diversos aspectos os sintomas da doença.

Non-Imaging Detectors and Counters. Chapter 10

Energy Technology Data Exchange (ETDEWEB)

Zanzonico, P. B. [Department of Medical Physics, Memorial Sloan Kettering Cancer Center, New York (United States)

2014-12-15

Historically, nuclear medicine has been largely an imaging based specialty, employing such diverse and increasingly sophisticated modalities as rectilinear scanning, (planar) gamma camera imaging, single photon emission computed tomography (SPECT) and positron emission tomography (PET). Non-imaging radiation detection, however, remains an essential component of nuclear medicine. This chapter reviews the operating principles, performance, applications and quality control (QC) of the various non-imaging radiation detection and measurement devices used in nuclear medicine, including survey meters, dose calibrators, well counters, intra-operative probes and organ uptake probes. Related topics, including the basics of radiation detection, statistics of nuclear counting, electronics, generic instrumentation performance parameters and nuclear medicine imaging devices, are reviewed in depth in other chapters of this book.

Basic Physics for Nuclear Medicine. Chapter 1

Energy Technology Data Exchange (ETDEWEB)

Podgorsak, E. B. [Department of Medical Physics, McGill University, Montreal (Canada); Kesner, A. L. [Division of Human Health, International Atomic Energy Agency, Vienna (Austria); Soni, P. S. [Medical Cyclotron Facility, Board of Radiation and Isotope Technology, Bhabha Atomic Research Centre, Mumbai (India)

2014-12-15

The technologies used in nuclear medicine for diagnostic imaging have evolved over the last century, starting with Röntgen’s discovery of X rays and Becquerel’s discovery of natural radioactivity. Each decade has brought innovation in the form of new equipment, techniques, radiopharmaceuticals, advances in radionuclide production and, ultimately, better patient care. All such technologies have been developed and can only be practised safely with a clear understanding of the behaviour and principles of radiation sources and radiation detection. These central concepts of basic radiation physics and nuclear physics are described in this chapter and should provide the requisite knowledge for a more in depth understanding of the modern nuclear medicine technology discussed in subsequent chapters.

Chapter 10: Mining genome-wide genetic markers.

Directory of Open Access Journals (Sweden)

Xiang Zhang

Full Text Available Genome-wide association study (GWAS aims to discover genetic factors underlying phenotypic traits. The large number of genetic factors poses both computational and statistical challenges. Various computational approaches have been developed for large scale GWAS. In this chapter, we will discuss several widely used computational approaches in GWAS. The following topics will be covered: (1 An introduction to the background of GWAS. (2 The existing computational approaches that are widely used in GWAS. This will cover single-locus, epistasis detection, and machine learning methods that have been recently developed in biology, statistic, and computer science communities. This part will be the main focus of this chapter. (3 The limitations of current approaches and future directions.

The phase-in and phase-out of European emissions of HCFC-141b and HCFC-142b under the Montreal Protocol: Evidence from observations at Mace Head, Ireland and Jungfraujoch, Switzerland from 1994 to 2004

Science.gov (United States)

Derwent, R. G.; Simmonds, P. G.; Greally, B. R.; O'doherty, S.; McCulloch, A.; Manning, A.; Reimann, S.; Folini, D.; Vollmer, M. K.

The mixing ratios of HCFC-141b (1,1-dichlorofluoroethane) and HCFC-142b (1-chloro-1,1-difluoroethane) have been rising steadily in baseline air at Mace Head, Ireland over the 10-year period from 1994 to 2004. These HCFCs are widely used replacements for the chlorofluorocarbons phased out under the Montreal Protocol and its subsequent amendments. Analysis of the HCFC content of regionally-polluted air arriving at Mace Head from the European continent shows that European emissions reached a peak during 2000-2001 and have declined subsequently, following the phase-out in their usage. European emissions of HCFC-141b have been further constrained by observations at the High-Alpine Jungfraujoch site. The reductions are consistent with the phase-out of HCFC production and use from the year 2001 onwards mandated by European regulations designed to exceed the requirements of the Montreal Protocol.

Chapter 8: Final thought on safety

Energy Technology Data Exchange (ETDEWEB)

NONE

2018-04-01

The chapter presents the objective of implementing and maintaining a good safety system: to prevent the occurrence of accidents and incidents (the abnormalities must be the exception) and if they occur their consequences should be mitigated. And make other considerations.

Special Topics in Radiography. Chapter 10

Energy Technology Data Exchange (ETDEWEB)

Mclean, I. D. [International Atomic Energy Agency, Vienna (Austria); Shepherd, J. A. [University of California at San Francisco, San Francisco, United States of America (United States)

2014-09-15

Up to this point, this handbook has described the use of X rays to form 2-D medical images of the 3-D patient. This process of reducing patient information by one dimension results in an image of superimposed tissues where important information might be obscured. Chapter 11 begins a section of the book involving the creation of cross-sectional medical images through computed tomography (CT), ultrasound and magnetic resonance imaging (MRI). This Chapter describes a number of special X ray imaging modalities and their associated techniques, and forms a transition between projection and cross-sectional imaging. The first of these special topics is dental radiography, which is characterized by a diversity of technology and innovation. The common intraoral radiograph of a single tooth has seen little fundamental change since the time of Roentgen and is, today, along with the simple chest radiograph, the most commonly performed radiographic examination. By contrast, the challenge to create an image of all the teeth simultaneously has placed dentistry at the cutting edge of technology, through the development of panographic techniques and, most recently, with the application of cone beam CT (CBCT). Moreover, the small size of the tooth and the consequent reduced need for X ray generation power promotes equipment mobility. The effect of the need for equipment mobility also forms a special topic that is examined in this chapter. Quantification of the composition of the body is another special X ray imaging technique. Dual energy X ray absorptiometry (DXA) is primarily used to derive the mass of one material in the presence of another, through knowledge of their unique X ray attenuation at different energies. DXA’s primary commercial application has been to measure body mineral density as an assessment of fracture risk and to diagnose osteoporosis; thus, the X ray energies used are optimized for bone density assessment. Currently, there are estimated to be over 50 000

Chapter Leadership Profiles among Citizen Activists in the Drunk Driving Movement.

Science.gov (United States)

Ungerleider, Steven; Bloch, Steven

1987-01-01

Study of Mothers Against Drunk Drivers (MADD) analyzed the chapter emphasis, levels of satisfaction and relationship to national office on several measures. Surveying 212 chapters, MADD leadership provided profile of independent, autonomous activists in the drunk driving countermeasure movement. (Author)

Chapter 10:Hardwoods for timber bridges

Science.gov (United States)

James P. Wacker; Ed T. Cesa

2005-01-01

This chapter describes the joint efforts of the Forest Service and the FHWA to administer national programs including research, demonstration bridges, and technology transfer components. Summary information on a number of Forest Service-WIT demonstration bridges constructed with hardwoods is also provided.

Draft of chapters 4-9 as of May 11, 1979

International Nuclear Information System (INIS)

1979-05-01

A revised outline for the final report is given, and the first draft of chapters 4 - 9 are included. The chapters cover enrichment demands according to various fuel cycle strategies, comparison of enrichment demand and availability, assessment and comparison of the proliferation aspects of enrichment, assurance of supply, special needs of developing countries, and general conclusions

[The Assistance maternelle de Montreal (1912-1961). An example of marginalization of philanthropic active women in the field of care for pregnants (French)].

Science.gov (United States)

Baillargeon, D

1999-01-01

This article examines the story of the Assistance maternelle de Montreal, an organization founded in 1912 by a group of bourgeois catholic women to provide material assistance and free medical services to poor pregnant mothers of the city. I want to show that even if the timid intervention of the Quebec state allowed the AM to survive during the almost 50 years, the rise of the experts in the health field--a phenomenon to which the AM has largely contributed--and in the philanthropic sector led to the marginalization of the female volunteers within the very institution they had created.

Accessibility to health care facilities in Montreal Island: an application of relative accessibility indicators from the perspective of senior and non-senior residents

Directory of Open Access Journals (Sweden)

Morency Catherine

2010-10-01

Full Text Available Abstract Background Geographical access to health care facilities is known to influence health services usage. As societies age, accessibility to health care becomes an increasingly acute public health concern. It is known that seniors tend to have lower mobility levels, and it is possible that this may negatively affect their ability to reach facilities and services. Therefore, it becomes important to examine the mobility situation of seniors vis-a-vis the spatial distribution of health care facilities, to identify areas where accessibility is low and interventions may be required. Methods Accessibility is implemented using a cumulative opportunities measure. Instead of assuming a fixed bandwidth (i.e. a distance threshold for measuring accessibility, in this paper the bandwidth is defined using model-based estimates of average trip length. Average trip length is an all-purpose indicator of individual mobility and geographical reach. Adoption of a spatial modelling approach allows us to tailor these estimates of travel behaviour to specific locations and person profiles. Replacing a fixed bandwidth with these estimates permits us to calculate customized location- and person-based accessibility measures that allow inter-personal as well as geographical comparisons. Data The case study is Montreal Island. Geo-coded travel behaviour data, specifically average trip length, and relevant traveller's attributes are obtained from the Montreal Household Travel Survey. These data are complemented with information from the Census. Health care facilities, also geo-coded, are extracted from a comprehensive business point database. Health care facilities are selected based on Standard Industrial Classification codes 8011-21 (Medical Doctors and Dentists. Results Model-based estimates of average trip length show that travel behaviour varies widely across space. With the exception of seniors in the downtown area, older residents of Montreal Island tend to be

Quantitative Nuclear Medicine. Chapter 17

Energy Technology Data Exchange (ETDEWEB)

Ouyang, J.; El Fakhri, G. [Massachusetts General Hospital and Harvard Medical School, Boston (United States)

2014-12-15

Planar imaging is still used in clinical practice although tomographic imaging (single photon emission computed tomography (SPECT) and positron emission tomography (PET)) is becoming more established. In this chapter, quantitative methods for both imaging techniques are presented. Planar imaging is limited to single photon. For both SPECT and PET, the focus is on the quantitative methods that can be applied to reconstructed images.

Water resources (Chapter 5)

CSIR Research Space (South Africa)

Hobbs, Philip

2016-01-01

Full Text Available and relationships that inform the association between geology, shale gas and groundwater that is discussed in this Chapter. The mudstones and sandstones of the Adelaide Subgroup at the base of the Beaufort Group succession of sedimentary strata represent... migration to surface. The sedimentary rocks of the Ecca Group cover a further ~6% of the study area. In agreement with Rosewarne et al. (2013), who recognise a western, a central and an eastern subarea; this study recognises an additional southern subarea...

Implications of climate and land use change: Chapter 4

Science.gov (United States)

Hall, Jefferson S.; Murgueitio, Enrique; Calle, Zoraida; Raudsepp-Hearne, Ciara; Stallard, Robert F.; Balvanera, Patricia; Hall, Jefferson S.; Kirn, Vanessa; Yanguas-Fernandez, Estrella

2015-01-01

This chapter relates ecosystem services to climate change and land use. The bulk of the chapter focuses on ecosystem services and steepland land use in the humid Neotropics – what is lost with land-cover changed, and what is gained with various types of restoration that are sustainable given private ownership. Many case studies are presented later in the white paper. The USGS contribution relates to climate change and the role of extreme weather events in land-use planning.

La acción comunitaria en la inserción social en Montreal: un estudio de caso en la colectividad haitiana

Directory of Open Access Journals (Sweden)

Reina Victoria Vega

2016-10-01

Full Text Available This article examines contributions to the strengthening of social cohesion by community organizations for social integration in the city of Montreal, based on the Center N A Rive case. The aim is to identify the strategies used by these organizations in order to increase social cohesion on the basis of immigrant integration. The methodology used is the case study. The research made it possible to identify the social innovations the organization studied had achieved in the field of literacy among adult immigrants, as well as its contributions in terms of access to employment, civic empowerment of immigrants at risk of social exclusion, and development of social entrepreneurship among immigrants.

Telemetry Standards, RCC Standard 106-17. Chapter 3. Frequency Division Multiplexing Telemetry Standards

Science.gov (United States)

2017-07-01

Standard 106-17 Chapter 3, July 2017 3-5 Table 3-4. Constant-Bandwidth FM Subcarrier Channels Frequency Criteria\\Channels: A B C D E F G H Deviation ...Telemetry Standards , RCC Standard 106-17 Chapter 3, July 2017 3-i CHAPTER 3 Frequency Division Multiplexing Telemetry Standards Acronyms...Frequency Division Multiplexing Telemetry Standards ................................ 3-1 3.1 General

Use of Neuber's rule to estimate the fatigue life of notched specimens of ASME SA 106-B steel piping in 2880C air

International Nuclear Information System (INIS)

Terrell, J.B.

1989-01-01

Fatigue strain-life tests were conducted on notched specimens of ADMESA 106-B piping steel at PWR operating temperatures (288 0 C (550 0 F)), under completely reversed loading. Fatigue limits at 10 7 cycles were estimated for smooth specimens to be 185 M Pa (26.8 ksi) at 24 0 C and 232 MPa (33.7 ksi) at 288 0 C. The higher fatigue strength observed at the PWR temperature is postulated to be caused by dynamic strain aging processes. However, a reduction in fatigue strength in the low cycle fatigue regime was observed in 288 0 C air environment tests, which may indicate that the current ASME Section III design curve for carbon steels is nonconservative in its positioning. Notch strain histories were estimated for the notched specimen tests using various interpretations of Neuber's rule. It was concluded that the use of the fatigue notch concentration factor (K f ) in the Neuber relation in conjunction with the uniaxial cyclic stress-strain curve provided the best correlation of notched specimen fatigue data with results obtained from smooth specimen tests. The notched specimen strain-life results derived from the application of Neuber's rule alone proved to be conservative when compared with smooth specimen test results to such an extent that Neuber-generated notch stresses and strain amplitudes cannot accurately be compared with the mean data curves derived from the ASME Section III fatigue curves for carbon steels which are based on net section stress measurements. (author)

The Innovation in Libraries Awesome Foundation Chapter

Directory of Open Access Journals (Sweden)

Joshua Finnell

2017-05-01

Full Text Available In Brief: This article discusses the creation, philosophy, and future directions of the Innovation in Libraries Awesome Foundation Chapter, a grassroots crowdfunding initiative incubated within Library Pipeline.

Vegetation and acidification, Chapter 5

Science.gov (United States)

David R. DeWalle; James N. Kochenderfer; Mary Beth Adams; Gary W. Miller

2006-01-01

In this chapter, the impact of watershed acidification treatments on WS3 at the Fernow Experimental Forest (FEF) and at WS9 on vegetation is presented and summarized in a comprehensive way for the first time. WS7 is used as a vegetative reference basin for WS3, while untreated plots within WS9 are used as a vegetative reference for WS9. Bioindicators of acidification...

Processo de adaptação da bateria Montreal de avaliação da comunicação: bateria MAC - ao português brasileiro Adaptation process to Brazilian Portuguese of the Montreal communication evaluation battery: MAC battery

Directory of Open Access Journals (Sweden)

Rochele Paz Fonseca

2007-01-01

Full Text Available O presente estudo tem por objetivo apresentar a adaptação do "Protocole Montréal d'Évaluation de la Communication - Protocole MEC" (Bateria Montreal de Avaliação da Comunicação - Bateria MAC ao Português Brasileiro. Esta bateria canadense foi construída para avaliar quatro processamentos comunicativos de ativação do hemisfério direito: discursivo, pragmático-inferencial, léxico-semântico e prosódico. Participaram do estudo seis tradutores, três juízes especialistas, 54 juízes não-especialistas e 16 participantes dos estudos piloto. Os procedimentos gerais promovidos foram tradução, análise de critérios psicolingüísticos por juízes e aplicação do instrumento em estudos piloto. As tarefas Interpretação de metáforas, Discurso narrativo e Julgamento semântico exigiram um processo de adaptação mais complexo e rigoroso. Com base em critérios psicolingüísticos, realizaram-se algumas mudanças nos estímulos, com a finalidade principal de manutenção do objetivo de cada tarefa do instrumento original. Este instrumento neuropsicológico pode ser uma ferramenta de avaliação da comunicação de indivíduos com lesão de hemisfério direito, lesão frontal, traumatismo crânio-encefálico e demência.This research aims to present the adaptation of the "Protocole Montréal d'Évaluation de la Communication - Protocole MEC" (Montreal Communication Evaluation Battery - MAC Battery to Brazilian Portuguese, in accordance with psycholinguistics criteria. MAC Battery is a Canadian instrument constructed to evaluate right hemisphere communicative and linguistic abilities, considering four processing domains: discoursive, pragmatic-inferential, lexical-semantic and prosodic. The participants were six translators, three specialist judges, 54 non-specialist judges and 16 subjects from pilot studies. Adaptation procedures included translation, judge analysis of psycholinguistics criteria and two pilot tests. Some tasks required

Fundamentals of Physics, Volume 1, (Chapters 1 - 21)

Science.gov (United States)

Walker, Jearl

2004-01-01

Chapter 1. Measurement 1. How does the appearance of a new type of cloud signal changes in Earth's atmosphere? 1-1 What Is Physics? 1-2 Measuring Things. 1-3 The International System of Units. 1-4 Changing Units. 1-5 Length. 1-6 Time. 1-7 Mass. Review & Summary. Problems. Chapter 2. Motion Along a Straight Line. What causes whiplash injury in rear-end collisions of cars? 2-1 What Is Physics? 2-2 Motion. 2-3 Position and Displacement. 2-4 Average Velocity and Average Speed. 2-5 Instantaneous Velocity and Speed. 2-6 Acceleration. 2-7 Constant Acceleration: A Special Case. 2-8 Another Look at Constant Acceleration. 2-9 Free-Fall Acceleration. 2-10 Graphical Integration in Motion Analysis. 2 Review & Summary. Questions. Problems. Chapter 3. Vectors. How does an ant know the way home with no guiding clues on the desert plains? 3-1 What Is Physics? 3-2 Vectors and Scalars. 3-3 Adding Vectors Geometrically. 3-4 Components of Vectors. 3-5 Unit Vectors. 3-6 Adding Vectors by Components. 3-7 Vectors and the Laws of Physics. 3-8 Multiplying Vectors. Review & Summary. Questions. Problems. Chapter 4. Motion in Two and Three Dimensions. In a motorcycle jump for record distance, where does the jumper put the second ramp? 4-1 What Is Physics? 4-2 Position and Displacement. 4-3 Average Velocity and Instantaneous Velocity. 4-4 Average Acceleration and Instantaneous Acceleration. 4-5 Projectile Motion. 4-6 Projectile Motion Analyzed. 4-7 Uniform Circular Motion. 4-8 Relative Motion in One Dimension. 4-9 Relative Motion in Two Dimensions. Review & Summary. Questions. Problems. Chapter 5. Force and Motion--I. When a pilot takes off from an aircraft carrier, what causes the compulsion to .y the plane into the ocean? 5-1 What Is Physics? 5-2 Newtonian Mechanics. 5-3 Newton's First Law. 5-4 Force. 5-5 Mass. 5-6 Newton's Second Law. 5-7 Some Particular Forces. 5-8 Newton's Third Law. 5-9 Applying Newton's Laws. Review & Summary. Questions. Problems. Chapter 6. Force and Motion--II. Can a