Do open access working papers attract more citations compared to printed journal articles from the same research unit?

DEFF Research Database (Denmark)

Ingwersen, Peter; Elleby, Anita

2011-01-01

articles published in the same year (2004) by the same institute and predominantly by the same authors. The study analyzes the total amount of citations and citation impact observed in Web of Science (WoS) and Google Scholar (GS) received during the five-year period 2004-09 (February) by the two...... access working papers publicly accessible through the DIIS e-archive became far less cited than the corresponding sample of DIIS journal articles published in printed form. However, highly cited working papers have higher impact than the average of the lower half of cited articles. Citation time series...... show identical distinct patterns for the articles in WoS and GS and working papers in GS, more than doubling the amount of citations received through the latter source....

FY 1978 scientific and technical reports, articles, papers, and presentations. [bibliography

Science.gov (United States)

White, O. L. (Compiler)

1978-01-01

Abstracts of 73 technical papers published or presented by MSFC personnel in FY-78 are presented. In addition, over 400 papers by contractors to that facility are listed along with the STAR document number for each report. Titles of 208 additional papers already cleared for publication are included.

FY 1990 scientific and technical reports, articles, papers, and presentations

Science.gov (United States)

Turner, Joyce E. (Compiler)

1990-01-01

Formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 90 are presented. Also included are papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from NTIS. The information may be of value to the scientific and engineering community in determining what information has been published and what is available.

78 FR 21151 - Boise White Paper, LLC, A Subsidiary of Boise Paper Holdings, LLC, Including On-Site Leased...

Science.gov (United States)

2013-04-09

... Paper, LLC, A Subsidiary of Boise Paper Holdings, LLC, Including On-Site Leased Workers From Guardsmark.... Helens, OR; Boise White Paper, LLC, A Subsidiary of Boise Paper Holdings, LLC, Vancouver, WA; Amended... workers and former workers of Boise White Paper, LLC, a subsidiary of Boise Paper Holdings, LLC, St...

Fiscal year 1981 scientific and technical reports, articles, papers, and presentations

Science.gov (United States)

Thacker, S. S. (Compiler)

1981-01-01

This bibliography lists approximately 503 formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY-1981. It also includes papers of MSFC contractors. Citations announced in the NASA scientific and technical information system are noted.

FY 1998 Scientific and Technical Reports, Articles, Papers, and Presentations

Science.gov (United States)

Waits, J. E. Turner (Compiler)

1999-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC (Marshall Space Flight Center) personnel in FY98. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1999 Scientific and Technical Reports, Articles, Papers, and Presentations

Science.gov (United States)

Waits, J.oyce E.Turner

2000-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY99. It also includes papers of MSFC contractors. All of the NASA series reports may be obtained from the NASA Center for AeroSpace Information (CASI), 7121 Standard Drive, Hanover, MD 21076-1320 The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY87 scientific and technical reports, articles, papers, and presentations

Science.gov (United States)

Turner, Joyce E. (Compiler)

1987-01-01

The document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY87. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, Va. 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 2004 Scientific and Technical Reports, Articles, Papers, and Presentations

Science.gov (United States)

Fowler, B. A. (Compiler)

2006-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel FY 2004. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this TM maybe of value to the scientific and engineering community in determining what information has been published and what is available.

FY 2001 Scientific and Technical Reports, Articles, Papers, and Presentations

Science.gov (United States)

Waits, J. E. Turner (Compiler)

2002-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2001. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1988 scientific and technical reports, articles, papers and presentations

Science.gov (United States)

Turner, Joyce E. (Compiler)

1988-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 88. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the NationaL Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 2003 Scientific and Technical Reports, Articles, Papers, and Presentations

Science.gov (United States)

Fowler, B. A. (Compiler)

2004-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY 2003. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Spring.eld, VA 22161. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

PaperBLAST: Text Mining Papers for Information about Homologs.

Science.gov (United States)

Price, Morgan N; Arkin, Adam P

2017-01-01

Large-scale genome sequencing has identified millions of protein-coding genes whose function is unknown. Many of these proteins are similar to characterized proteins from other organisms, but much of this information is missing from annotation databases and is hidden in the scientific literature. To make this information accessible, PaperBLAST uses EuropePMC to search the full text of scientific articles for references to genes. PaperBLAST also takes advantage of curated resources (Swiss-Prot, GeneRIF, and EcoCyc) that link protein sequences to scientific articles. PaperBLAST's database includes over 700,000 scientific articles that mention over 400,000 different proteins. Given a protein of interest, PaperBLAST quickly finds similar proteins that are discussed in the literature and presents snippets of text from relevant articles or from the curators. PaperBLAST is available at http://papers.genomics.lbl.gov/. IMPORTANCE With the recent explosion of genome sequencing data, there are now millions of uncharacterized proteins. If a scientist becomes interested in one of these proteins, it can be very difficult to find information as to its likely function. Often a protein whose sequence is similar, and which is likely to have a similar function, has been studied already, but this information is not available in any database. To help find articles about similar proteins, PaperBLAST searches the full text of scientific articles for protein identifiers or gene identifiers, and it links these articles to protein sequences. Then, given a protein of interest, it can quickly find similar proteins in its database by using standard software (BLAST), and it can show snippets of text from relevant papers. We hope that PaperBLAST will make it easier for biologists to predict proteins' functions.

PaperBLAST: Text Mining Papers for Information about Homologs

International Nuclear Information System (INIS)

Price, Morgan N.; Arkin, Adam P.

2017-01-01

Large-scale genome sequencing has identified millions of protein-coding genes whose function is unknown. Many of these proteins are similar to characterized proteins from other organisms, but much of this information is missing from annotation databases and is hidden in the scientific literature. To make this information accessible, PaperBLAST uses EuropePMC to search the full text of scientific articles for references to genes. PaperBLAST also takes advantage of curated resources (Swiss-Prot, GeneRIF, and EcoCyc) that link protein sequences to scientific articles. PaperBLAST’s database includes over 700,000 scientific articles that mention over 400,000 different proteins. Given a protein of interest, PaperBLAST quickly finds similar proteins that are discussed in the literature and presents snippets of text from relevant articles or from the curators. With the recent explosion of genome sequencing data, there are now millions of uncharacterized proteins. If a scientist becomes interested in one of these proteins, it can be very difficult to find information as to its likely function. Often a protein whose sequence is similar, and which is likely to have a similar function, has been studied already, but this information is not available in any database. To help find articles about similar proteins, PaperBLAST searches the full text of scientific articles for protein identifiers or gene identifiers, and it links these articles to protein sequences. Then, given a protein of interest, it can quickly find similar proteins in its database by using standard software (BLAST), and it can show snippets of text from relevant papers. We hope that PaperBLAST will make it easier for biologists to predict proteins’ functions.

Article Including Environmental Barrier Coating System

Science.gov (United States)

Lee, Kang N. (Inventor)

2015-01-01

An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

Fiscal year 1993 scientific and technical reports, articles, papers, and presentations

Science.gov (United States)

Turner, Joyce E. (Compiler)

1993-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY93. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

The FY 1992 scientific and technical reports, articles, papers, and presentations

Science.gov (United States)

Turner, Joyce E. (Compiler)

1992-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY92. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1995 Scientific and Technical Reports, Articles, Papers, and Presentations, Volume 1

Science.gov (United States)

Turner, Joyce E. (Compiler)

1995-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY95. It also includes papers of MSFC contractors. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

The NBER-Rensselaer Scientific Papers Database: Form, Nature, and Function. NBER Working Paper No. 14575

Science.gov (United States)

Adams, James D.; Clemmons, J. Roger

2008-01-01

This article is a guide to the NBER-Rensselaer Scientific Papers Database, which includes more than 2.5 million scientific publications and over 21 million citations to those papers. The data cover an important sample of 110 top U.S. universities and 200 top U.S.-based R&D-performing firms during the period 1981-1999. This article describes the…

FY 1996 Scientific and Technical Reports, Articles, Papers, and Presentations. Volume 1

Science.gov (United States)

Turner-Waits, Joyce E. (Compiler)

1996-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY96. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Passage-Based Bibliographic Coupling: An Inter-Article Similarity Measure for Biomedical Articles

Science.gov (United States)

Liu, Rey-Long

2015-01-01

Biomedical literature is an essential source of biomedical evidence. To translate the evidence for biomedicine study, researchers often need to carefully read multiple articles about specific biomedical issues. These articles thus need to be highly related to each other. They should share similar core contents, including research goals, methods, and findings. However, given an article r, it is challenging for search engines to retrieve highly related articles for r. In this paper, we present a technique PBC (Passage-based Bibliographic Coupling) that estimates inter-article similarity by seamlessly integrating bibliographic coupling with the information collected from context passages around important out-link citations (references) in each article. Empirical evaluation shows that PBC can significantly improve the retrieval of those articles that biomedical experts believe to be highly related to specific articles about gene-disease associations. PBC can thus be used to improve search engines in retrieving the highly related articles for any given article r, even when r is cited by very few (or even no) articles. The contribution is essential for those researchers and text mining systems that aim at cross-validating the evidence about specific gene-disease associations. PMID:26440794

Passage-Based Bibliographic Coupling: An Inter-Article Similarity Measure for Biomedical Articles.

Directory of Open Access Journals (Sweden)

Rey-Long Liu

Full Text Available Biomedical literature is an essential source of biomedical evidence. To translate the evidence for biomedicine study, researchers often need to carefully read multiple articles about specific biomedical issues. These articles thus need to be highly related to each other. They should share similar core contents, including research goals, methods, and findings. However, given an article r, it is challenging for search engines to retrieve highly related articles for r. In this paper, we present a technique PBC (Passage-based Bibliographic Coupling that estimates inter-article similarity by seamlessly integrating bibliographic coupling with the information collected from context passages around important out-link citations (references in each article. Empirical evaluation shows that PBC can significantly improve the retrieval of those articles that biomedical experts believe to be highly related to specific articles about gene-disease associations. PBC can thus be used to improve search engines in retrieving the highly related articles for any given article r, even when r is cited by very few (or even no articles. The contribution is essential for those researchers and text mining systems that aim at cross-validating the evidence about specific gene-disease associations.

Articles Published in Technical Journals, Reports Published, Papers Presented at the Geneva Conference and at Scientific Meetings, and Inventions Disclosed During 1958 by ORNL Staff Members

Energy Technology Data Exchange (ETDEWEB)

None

1958-01-01

This compilation presents the articles that were published in the open literature or as unclassified ORNL reports, papers presented at the Geneva Conference and at scientific meetings, and inventions disclosed during 1957 by members of the Oak Ridge National Laboratory. Topics include biology, chemistry, general studies, health physics, instrumentation, mathematics, metallurgy and materials, physics, and technology.

Article and process for producing an article

Science.gov (United States)

Lacy, Benjamin Paul; Jacala, Ariel Caesar Prepena; Kottilingam, Srikanth Chandrudu; Schick, David Edward

2017-10-24

An article and a process of producing an article are provided. The article includes a base material, a cooling feature arrangement positioned on the base material, the cooling feature arrangement including an additive-structured material, and a cover material. The cooling feature arrangement is between the base material and the cover material. The process of producing the article includes manufacturing a cooling feature arrangement by an additive manufacturing technique, and then positioning the cooling feature arrangement between a base material and a cover material.

Philosophical Papers: Submissions

African Journals Online (AJOL)

Articles should be relevant to the analytic tradition in philosophy, understood broadly and including critiques of that tradition. All submissions are independently refereed. In most cases, decisions are based on reports from at least two referees. Final editorial decisions are made by the Editorial Board of Philosophical Papers.

Article and method of forming an article

Science.gov (United States)

Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Dutta, Sandip; Schick, David Edward

2017-12-26

Provided are an article and a method of forming an article. The method includes providing a metallic powder, heating the metallic powder to a temperature sufficient to joint at least a portion of the metallic powder to form an initial layer, sequentially forming additional layers in a build direction by providing a distributed layer of the metallic powder over the initial layer and heating the distributed layer of the metallic powder, repeating the steps of sequentially forming the additional layers in the build direction to form a portion of the article having a hollow space formed in the build direction, and forming an overhang feature extending into the hollow space. The article includes an article formed by the method described herein.

FY 1984 scientific and technical reports, articles, papers and presentations

Science.gov (United States)

Turner, J. E. (Compiler)

1984-01-01

This bibliography lists formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel. Abstracts are presented for 56 technical memorandum, and 13 technical papers. Six publications, over 260 contractor reports, and more than 300 papers cleared for publication are cited.

DataSet for Passive Containment Journal Article

Data.gov (United States)

U.S. Environmental Protection Agency — This data is for Figures 6 and 7 in the journal article. The data also includes the two EPANET input files used for the analysis described in the paper, one for the...

Article Review: Advanced Change Theory Revisited: An Article Critique

Directory of Open Access Journals (Sweden)

R. Scott Pochron

2008-12-01

Full Text Available The complexity of life in 21st century society requires new models for leadingand managing change. With that in mind, this paper revisits the model for AdvancedChange Theory (ACT as presented by Quinn, Spreitzer, and Brown in their article,“Changing Others Through Changing Ourselves: The Transformation of HumanSystems” (2000. The authors present ACT as a potential model for facilitating change incomplex organizations. This paper presents a critique of the article and summarizesopportunities for further exploring the model in the light of current trends indevelopmental and integral theory.

Top-cited articles in traumatic brain injury.

Directory of Open Access Journals (Sweden)

Bhanu eSharma

2014-11-01

Full Text Available A review of the top-cited articles in a scientific discipline can identify areas of research that are well established and those in need of further development, and may, as a result, inform and direct future research efforts. Our objective was to identify and characterize the top-cited articles in traumatic brain injury (TBI. We used publically available software to identify the 50 TBI articles with the most lifetime citations, and the 50 TBI articles with the highest annual citation rates. A total of 73 articles were included in this review, with 27 of the 50 papers with the highest annual citation rates common to the cohort of 50 articles with the most lifetime citations. All papers were categorized by their primary topic or focus, namely: predictor of outcome, pathology/natural history, treatment, guidelines and consensus statements, epidemiology, assessment measures, or experimental model of TBI. The mean year of publication of the articles with the most lifetime citations and highest annual citation rates was, respectively, 1990 ± 14.9 years and 2003 ± 6.7 years. The 50 articles with the most lifetime citations typically studied predictors of outcome (34.0%, 17/50 and were specific to severe TBI (38.0%, 19/50. In contrast, the most common subject of papers with the highest annual citation rates was treatment of brain injury (22.0%, 11/50, and these papers most frequently investigated mild TBI (36.0%, 18/50. These findings suggest an intensified focus on mild TBI, which is perhaps a response to the dedicated attention these injuries are currently receiving in the context of sports and war, and because of their increasing incidence in developing nations. Our findings also indicate increased focus on treatment of TBI, possibly due to the limited efficacy of current interventions for TBI. This review provides a cross-sectional summary of some of the most influential articles in TBI, and a bibliometric examination of the current status of TBI

The top-cited articles in medical education: a bibliometric analysis.

Science.gov (United States)

Azer, Samy A

2015-08-01

To identify and examine the characteristics of the 50 top-cited articles in medical education. Two searches were conducted in the Web of Knowledge database in March 2014: a search of medical education journals in the category "Education, Scientific Discipline" (List A) and a keyword search across all journals (List B). Articles identified were reviewed for citation count, country of origin, article type, journal, authors, and publication year. Both lists included 56 articles, not 50, because articles with the same absolute number of citations shared the same rank. The majority of List A articles were published in Academic Medicine (34; 60.7%) and Medical Education (16; 28.6%). In List B, 27 articles (48.2%) were published in medical education journals, 19 (33.9%) in general medicine and surgery journals, and 10 (17.9%) in higher education and educational psychology journals. Twenty-six articles were included in both lists, with different rankings. Reviews and articles constituted the majority of articles; there were only 8 research papers in List A and 13 in List B. Articles mainly originated from the United States, Canada, the Netherlands, and the United Kingdom. The majority were published from 1979 to 2007. There was no correlation between year and citation count. The finding that over half of List B articles were published in nonmedical education journals is consistent with medical education's integrated nature and subspecialty breadth. Twenty of these articles were among their respective non-medical-education journals' 50 top-cited papers, showing that medical education articles can compete with subject-based articles.

Article and method for making an article

Energy Technology Data Exchange (ETDEWEB)

Lacy, Benjamin Paul; Schick, David Edward; Kottilingam, Srikanth Chandrudu

2018-04-03

An article and a method for making shaped cooling holes in an article are provided. The method includes the steps of depositing a metal alloy powder to form an initial layer including at least one aperture, melting the metal alloy powder with a focused energy source to transform the powder layer to a sheet of metal alloy, sequentially depositing an additional layer of the metal alloy powder to form a layer including at least one aperture corresponding to the at least one aperture in the initial layer, melting the additional layer of the metal alloy powder with the focused energy source to increase the sheet thickness, and repeating the steps of sequentially depositing and melting the additional layers of metal alloy powder until a structure including at least one aperture having a predetermined profile is obtained. The structure is attached to a substrate to make the article.

FY 1980 scientific and technical reports, articles, papers, and presentations

Science.gov (United States)

White, O. L. (Compiler)

1980-01-01

Abstracts are presented for 60 technical memoranda and 5 technical papers published in technical journals or presented by MSFC personnel in FY 1980. Conference and reference publications are cited along with contractor reports and papers cleared for presentation.

THE ROLE OF ARTICLE LEVEL METRICS IN SCIENTIFIC PUBLISHING

Directory of Open Access Journals (Sweden)

Vladimir TRAJKOVSKI

2016-04-01

Full Text Available Emerging metrics based on article-level does not exclude traditional metrics based on citations to the journal, but complements them. Article-level metrics (ALMs provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, statistics of usage, discussions in online comments and social media, social bookmarking, and recommendations. In this editorial, the role of article level metrics in publishing scientific papers has been described. Article-Level Metrics (ALMs are rapidly emerging as important tools to quantify how individual articles are being discussed, shared, and used. Data sources depend on the tool, but they include classic metrics indicators depending on citations, academic social networks (Mendeley, CiteULike, Delicious and social media (Facebook, Twitter, blogs, and Youtube. The most popular tools used to apply this new metrics are: Public Library of Science - Article-Level Metrics, Altmetric, Impactstory and Plum Analytics. Journal Impact Factor (JIF does not consider impact or influence beyond citations count as this count reflected only through Thomson Reuters’ Web of Science® database. JIF provides indicator related to the journal, but not related to a published paper. Thus, altmetrics now becomes an alternative metrics for performance assessment of individual scientists and their contributed scholarly publications. Macedonian scholarly publishers have to work on implementing of article level metrics in their e-journals. It is the way to increase their visibility and impact in the world of science.

Article and method for making an article

Science.gov (United States)

Lacy, Benjamin Paul; Schick, David Edward; Kottilingam, Srikanth Chandrudu

2018-04-03

An article and a method for making shaped cooling holes in an article are provided. The method includes the steps of providing a metal alloy powder; forming an initial layer with the metal alloy powder, the initial layer having a preselected thickness and a preselected shape, the preselected shape including at least one aperture; sequentially forming an additional layer over the initial layer with the metal alloy powder, the additional layer having a second preselected thickness and a second preselected shape, the second preselected shape including at least one aperture corresponding to the at least one aperture in the initial layer; and joining the additional layer to the initial layer, forming a structure having a predetermined thickness, a predetermined shape, and at least one aperture having a predetermined profile. The structure is attached to a substrate to make the article.

Fiscal year 1977 scientific and technical reports, articles, papers, and presentations

Science.gov (United States)

White, O. L. (Compiler)

1977-01-01

This bibliography lists 78 NASA technical memoranda, notes, papers, and reports presented by Marshall Space Flight Center personnel in FY 1977. In addition, 525 papers by contractors to that facility are cited along with 129 papers cleared for presentation.

77 FR 70477 - Verso Paper Corporation, Sartell Mill Division, Including On-Site Leased Workers From Securitas...

Science.gov (United States)

2012-11-26

..., Sartell Mill Division, Including On-Site Leased Workers From Securitas Security Services, Manpower, Inc..., applicable to workers and former workers of Verso Paper Corporation, Sartell Mill Division, Sartell... to TA-W-81,210 is hereby issued as follows: All workers of Verso Paper Corporation, Sartell Mill...

[The references in articles published in biomedical journals].

Science.gov (United States)

Reyes, H

2001-04-01

Bibliographic citations or "references" are an important component of all scientific manuscripts. The authors are responsible for their accuracy and they should follow the format and style requested by the journal where they are submitting their paper. Revista Médica de Chile adheres to the "Uniform Requirements" established by the Vancouver Group of Medical Editors. Equally important is a correct choice of references, including those original articles strictly connected to the content of the manuscript. The number of citations usually vary according to the specific character of the study: research article, or case reports, review article, etc. Common mistakes are due to an excessive number of repetitive or irrelevant citations, or the omission of important articles sometimes not found in bibliographic indexes, or an erroneous claim of priority in reporting an observation. Finally, in developing countries the authors should include previous reports appeared in their own local journals, therefore improving their opportunities of achieving international visibility.

Top-Cited Articles in Implant Dentistry.

Science.gov (United States)

Fardi, Anastasia; Kodonas, Konstantinos; Lillis, Theodoros; Veis, Alexander

Citation analysis is the field of bibliometrics that uses citation data to evaluate the scientific recognition and the influential performance of a research article in the scientific community. The aim of this study was to conduct a bibliometric analysis of the top-cited articles pertaining to implant dentistry, to analyze the main characteristics, and to display the most interesting topics and evolutionary trends. The 100 top-cited articles published in "Dentistry, Oral Surgery, and Medicine" journals were identified using the Science Citation Index Database. The articles were further reviewed, and basic information was collected, including the number of citations, journals, authors, publication year, study design, level of evidence, and field of study. The highly cited articles in implant dentistry were cited between 199 and 2,229 times. The majority of them were published in four major journals: Clinical Oral Implants Research, International Journal of Oral & Maxillofacial Implants, Journal of Clinical Periodontology, and Journal of Periodontology. The publication year ranged from 1981 to 2009, with 45% published in a nine-year period (2001 to 2009). Publications from the United States (29%) were the most heavily cited, followed by those from Sweden (23%) and Switzerland (17%). The University of Göteborg from Sweden produced the highest number of publications (n = 19), followed by the University of Bern in Switzerland (n = 13). There was a predominance of clinical papers (n = 42), followed by reviews (n = 25), basic science research (n = 21), and proceedings papers (n = 12). Peri-implant tissue healing and health (24%), implant success/failures (19.2%), and biomechanical topics (16.8%) were the most common fields of study. Citation analysis in the field of implant dentistry reveals interesting information about the topics and trends negotiated by researchers and elucidates which characteristics are required for a paper to attain a "classic" status. Clinical

Article, component, and method of forming an article

Science.gov (United States)

Lacy, Benjamin Paul; Itzel, Gary Michael; Kottilingam, Srikanth Chandrudu; Dutta, Sandip; Schick, David Edward

2018-05-22

An article and method of forming an article are provided. The article includes a body portion separating an inner region and an outer region, an aperture in the body portion, the aperture fluidly connecting the inner region to the outer region, and a conduit extending from an outer surface of the body portion at the aperture and being arranged and disposed to controllably direct fluid from the inner region to the outer region. The method includes providing a body portion separating an inner region and an outer region, providing an aperture in the body portion, and forming a conduit over the aperture, the conduit extending from an outer surface of the body portion and being arranged and disposed to controllably direct fluid from the inner region to the outer region. The article is arranged and disposed for insertion within a hot gas path component.

"It is merely a paper tiger." Battle for increased tobacco advertising regulation in Indonesia: content analysis of news articles.

Science.gov (United States)

Astuti, Putu Ayu Swandewi; Freeman, Becky

2017-09-01

At the end of 2012, the Indonesian government enacted tobacco control regulation (PP 109/2012) that included stricter tobacco advertising, promotion and sponsorship (TAPS) controls. The PP did not ban all forms of TAPS and generated a great deal of media interest from both supporters and detractors. This study aims to analyse stakeholder arguments regarding the adoption and implementation of the regulation as presented through news media converge. Content analysis of 213 news articles reporting on TAPS and the PP that were available from the Factiva database and the Google News search engine. Indonesia, 24 December 2012-29 February 2016. Arguments presented in the news article about the adoption and implementation of the PP were coded into 10 supportive and 9 opposed categories. The news actors presenting the arguments were also recorded. Kappa statistic were calculated for intercoder reliability. Of the 213 relevant news articles, 202 included stakeholder arguments, with a total of 436 arguments coded across the articles. More than two-thirds, 69% (301) of arguments were in support of the regulation, and of those, 32.6% (98) agreed that the implementation should be enhanced. Of 135 opposed arguments, the three most common were the potential decrease in government revenue at 26.7% (36), disadvantage to the tobacco industry at 18.5% (25) and concern for tobacco farmers and workers welfare at 11.1% (15). The majority of the in support arguments were made by national government, tobacco control advocates and journalists, while the tobacco industry made most opposing arguments. Analysing the arguments and news actors provides a mapping of support and opposition to an essential tobacco control policy instrument. Advocates, especially in a fragmented and expansive geographic area like Indonesia, can use these findings to enhance local tobacco control efforts. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights

Data on the descriptive overview and the quality assessment details of 12 qualitative research papers.

Science.gov (United States)

Barnabishvili, Maia; Ulrichs, Timo; Waldherr, Ruth

2016-09-01

This data article presents the supplementary material for the review paper "Role of acceptability barriers in delayed diagnosis of Tuberculosis: Literature review from high burden countries" (Barnabishvili et al., in press) [1]. General overview of 12 qualitative papers, including the details about authors, years of publication, data source locations, study objectives, overview of methods, study population characteristics, as well as the details of intervention and the outcome parameters of the papers are summarized in the first two tables included to the article. Quality assessment process of the methodological strength of 12 papers and the results of the critical appraisal are further described and summarized in the second part of the article.

A survey of retracted articles in dentistry.

Science.gov (United States)

Nogueira, Túlio Eduardo; Gonçalves, Andréia Souza; Leles, Cláudio Rodrigues; Batista, Aline Carvalho; Costa, Luciane Rezende

2017-07-06

Publication retraction is a mechanism to preserve the scientific literature against publications that contain seriously flawed or erroneous data, redundant publication, plagiarism, unethical research, and other features that compromise the integrity of science. An increase in the occurrence of retractions in recent years has been reported. Nevertheless, there is scarce information on this topic concerning publications in dentistry and related specialties. Thus, this study aimed to investigate retracted papers published in dental journals. Data collection included an exploratory search in PubMed and a specific search in SCImago Journal Rank indexed journals, complemented by the cases reported on the Retraction Watch website and in PubMed. All 167 dental journals included in SCImago were searched for identification of retracted articles up to March 2016. The selected retracted articles and their corresponding retraction notices were recorded and assessed for classification according to the reason for retraction and other additional information. Forty of the 167 journals scrutinised at SCImago (23.9%) had at least one retracted article, and four additional journals were identified from the Retraction Watch website. A total of 72 retracted found were retracted for the reasons: redundant publication (20.8%), plagiarism (18.1%), misconduct (13.8%), overlap (13.6%) and honest error (9.7%). Higher number of retractions were reported in those journals with cites/doc <2.0-n = 49 (74.2%). The types of studies were mainly laboratory studies (34.7%), case reports (22.2%) and review articles (13.9%). The approach to ethical problems in papers published in dental scientific journals is still incipient; retractions were mostly due to the authors' malpractice and were more frequently related to journals with less impact.

What is a journal article and does it really matter?

DEFF Research Database (Denmark)

Nicolaisen, Jeppe

2014-01-01

The paper presents the results of two Bradford analyses conducted on two different types of journal articles produced by departments at Uppsala University, Sweden. The two types of journal articles studied are “refereed” and “other (popular science, discussions, etc.)”. The results show...... that the rank ordered lists of departments vary a lot, and thus that results of Bradford analyses are depending in part on the types of journal articles included in the study. The results are discussed and connected to problems and challenges related to concept operationalization....

Audio Papers

DEFF Research Database (Denmark)

Groth, Sanne Krogh; Samson, Kristine

2016-01-01

With this special issue of Seismograf we are happy to present a new format of articles: Audio Papers. Audio papers resemble the regular essay or the academic text in that they deal with a certain topic of interest, but presented in the form of an audio production. The audio paper is an extension...

Predictors of article impact in suicidology: the bereavement literature, a research note.

Science.gov (United States)

Andriessen, Karl; Krysinska, Karolina; Stack, Steven

2015-02-01

Citation analysis has been neglected in suicidology. The present note applies a mixed-methods approach to both test and suggest hypotheses for the variation in article impact in the bereavement literature. One hundred three articles from three core suicidology journals met the criteria for inclusion in the investigation. Citations to the articles were obtained from the Web of Science. Predictor variables included structural characteristics of the author (e.g., gender) and the article itself (e.g., years since publication). A multivariate regression analysis determined that, controlling for the other variables, the most important predictor of citations was the review article (β = .461), followed by year of publication (β = -.414), the multiauthored article (β = .302), publication in Suicide and Life-Threatening Behavior (SLTB) (β = .161), and male gender (β = .156). The 12 most cited articles were published between 1979 and 2004 in SLTB. The majority of these papers was written by males, were U.S. authors, and had more than one author. Four of the most cited articles were reviews. The study concludes that structural characteristics of articles and authors explained 41% of the variance in citations. The qualitative analysis determined that review papers, and papers on characteristics of suicide bereavement and psychological autopsies have been most frequently cited. Replication studies are needed for other subfields of suicidology. © 2014 The American Association of Suicidology.

ELT RESEARCH PAPERS AS AUTHENTIC MATERIALS IN TEACHING RESEARCH-BASED ARTICLE WRITING: A CASE IN INDONESIAN CONTEXT

Directory of Open Access Journals (Sweden)

M. Ali Ghufron

2017-09-01

Full Text Available There are strong shreds of evidence that the choice of instructional materials has large effects on students’ achievement. This study was to assess the efficacy of using ELT research papers as authentic materials in teaching research-based article writing. This study was aimed at revealing whether or not there is a significant difference in students’ writing skill in terms of ELT research paper writing between the students who were taught by using ELT research papers as authentic materials and those who were taught by using textbook materials provided by the faculty. This study belongs to a quasi-experimental study with an experimental and control group pretest-posttest design. The population of this study was 75 students from the fourth semester of English Education Study Program of IKIP PGRI Bojonegoro, East Java, Indonesia. The sample was selected through cluster random sampling and consisted of 50 students that were divided into two groups. The instrument used to collect the data was a writing test. Consequently, normality and homogeneity of the data were tested. A t-test was used to compare the mean of the two groups. The hypothesis was designed and tested at 0.05 level of significance. The results revealed that there is a significant difference in students’ academic writing skill between the students who were taught by using the ELT research papers as authentic materials and those who were taught by using textbook materials. The t-test revealed that t-value is higher than t-table (6.07>2.01. Therefore it is concluded that the authentic instructional materials could significantly improve students’ academic writing skill.

ARTICLES RECEIVED

Institute of Scientific and Technical Information of China (English)

1994-01-01

The following articles have been submitted for possible publication in Teaching English in China. For reasons of space or priority they have not been able to be included. If you are interested in further information about an article please contact the author direct at the address given below.

Top-cited articles in digestive system disease from 1950 to 2013.

Science.gov (United States)

Tang, Xiaowei; Gong, Wei; Yuan, Fangfang; Li, Ran; Han, Xiaomei; Huang, Silin; Zhi, Fachao; Jiang, Bo

2016-01-01

Examination of top-cited articles is a tool that can help to identify and monitor outstanding scientific researches and landmark papers. We aimed to identify the 100 most cited published papers in peer-reviewed biomedical journals in the field of digestive diseases and to examine their characteristics. The Web of Science (including Science Citation Index) was searched for the most cited papers related to digestive diseases, published from 1955 to the present. The top 100 most cited articles were identified. The number of citations, countries, and institutions of origin, year of publication, study design, topic, and levels of evidence of the articles were noted and analyzed. The most top-cited articles had a mean of 1375 citations. These articles were published between 1978 and 2009 in 29 high-impact journals, with the New England Journal of Medicine (n = 22) topping the list. Of the 100 articles, 34 were clinical studies, 15 were review articles, and 34 were concerned basic science. These articles came from 18 countries, with the USA contributing most of the top-cited articles (n = 53). Eighty-seven institutions produced these 100 top-cited articles, led by the University of Barcelona (n = 4). Seven persons authored two or more of these top-cited articles. The mostly represented specialty was gastrointestinal oncology (n = 49). Our study can give a historical perspective on the scientific progress of digestive diseases, as well as allow for recognition of most important advances in this area and provide useful information to guide future researches. © 2015 Journal of Gastroenterology and Hepatology Foundation and Wiley Publishing Asia Pty Ltd.

Classic articles and workbook: EPRI monographs on simulation of electric power production

International Nuclear Information System (INIS)

Stremel, J.P.

1991-12-01

This monograph republishes several articles including a seminal one on probabilistic production costing for electric power generation. That article is given in the original French along with a English translation. Another article, written by R. Booth, gives a popular explanation of the theory, and a workbook by B. Manhire is included that carries through a simple example step by step. The classical analysis of non-probabilistic generator dispatch by L.K. Kirchmayer is republished along with an introductory essay by J.P. Stremel that puts in perspective the monograph material. The article in French was written by H. Baleriaux, E. Jamoulle, and Fr. Linard de Guertechin and first published in Brussels in 1967. It derived a method for calculating the expected value of production costs by modifying a load duration curve through the use of probability factors that account for unplanned random generator outages. Although the paper showed how pump storage plants could be included and how linear programming could be applied, the convolution technique used in the probabilistic calculations is the part most widely applied. The tutorial paper by Booth was written in a light style, and its lucidity helped popularize the method. The workbook by Manhire also shows how the calculation can be shortened significantly using cumulants to approximate the load duration curve

100 articles every ecologist should read.

Science.gov (United States)

Courchamp, Franck; Bradshaw, Corey J A

2018-02-01

Reading scientific articles is a valuable and major part of the activity of scientists. Yet, with the upsurge of currently available articles and the increasing specialization of scientists, it becomes difficult to identify, let alone read, important papers covering topics not directly related to one's own specific field of research, or that are older than a few years. Our objective was to propose a list of seminal papers deemed to be of major importance in ecology, thus providing a general 'must-read' list for any new ecologist, regardless of particular topic or expertise. We generated a list of 544 papers proposed by 147 ecology experts (journal editorial members) and subsequently ranked via random-sample voting by 368 of 665 contacted ecology experts, covering 6 article types, 6 approaches and 17 fields. Most of the recommended papers were not published in the highest-ranking journals, nor did they have the highest number of mean annual citations. The articles proposed through the collective recommendation of several hundred experienced researchers probably do not represent an 'ultimate', invariant list, but they certainly contain many high-quality articles that are undoubtedly worth reading-regardless of the specific field of interest in ecology-to foster the understanding, knowledge and inspiration of early-career scientists.

Selected articles translated from Jadernye Konstanty (Nuclear Constants) volume 1, 1996

International Nuclear Information System (INIS)

1997-08-01

This report contains selected articles translated from Jedernye Konstanty (Nuclear Constants). Eight papers are included and each one is separately indexed. Nuclear data libraries, Neutron Reactions, Low energy Photofission etc. are dealt with. Refs, figs, tabs

FY 1997 Scientific and Technical Reports, Articles, Papers, and Presentations

Science.gov (United States)

Waits, J. E. Turner (Compiler)

1998-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY97. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

How to create a journal article from a thesis.

Science.gov (United States)

Ahern, Kathy

2012-01-01

To identify strategies to assist in the publication of research arising from a postgraduate thesis or dissertation. There are many benefits to publishing a journal article from a completed thesis, including contributing knowledge to the writer's chosen field, career enhancement and personal satisfaction. However, there are also numerous obstacles for the newly graduated student in crafting an article fit for a specialist publication from a thesis. The author conducted a search of the title, abstract and keywords of the Cinahl, Scopus and Proquest databases, from 1990 to 2010: The author searched for the words: 'journal article' or 'manuscript; 'thesis' or 'dissertation'. The author excluded papers if: they pertained to allocation of authorship to someone other than the academic adviser; related to undergraduate issues rather than graduate dissertations; were discussions of the merits of a PhD by 'publication' instead of 'by thesis'; were not published in a peer-reviewed journal; or were not in English. The relationship between adviser and student changes as the student becomes a graduate, and new roles for the student and adviser need to be negotiated. Students need to realise that writing a paper from a thesis is usually going to be more difficult than they anticipate, but the application of strategies discussed in this paper should make the task manageable. Furthermore, universities might wish to consider alternatives in which published papers emerge before the examination of a thesis, such as requiring students to write a paper as part of their coursework.

Selected papers, with commentary, of Tony Hilton Royle Skyrme

International Nuclear Information System (INIS)

1994-01-01

This book contains 13 selected papers of T.H.R. Skyrme covering work on the alpha-particle and shell models of the nucleus and, primarily, on the Skyrme model of the nucleus. The present collection of articles also includes a re-publication of articles, by others and of a later date, as evidence of the significant impact, eventually, of the concept of Skyrmions on nuclear theory. However, these articles had previously already been submitted to the INIS Data Base. Refs, figs, tabs

Shared Responsibility under Article 80 CISG

DEFF Research Database (Denmark)

Neumann, Thomas

2009-01-01

Article 80 exempts from liability in the situation where the promisor's failure to perform has been caused by the promisee. The Article has been insufficiently dealt with in the literature and has been overlooked in case law. The paper demonstrates that article 80 has an independent scope compared...... to articles 77, 79 and 80. Five areas are investigated in this regard; the placement in CISG, the focus of the Articles, the cause of the detriment or loss, the affected remedies and the duty to overcome the detriment or loss. Further more, the paper outlines the issues related to the particular situation...... of shared responsibility in which both the promisor and the promisee seem to have caused the promisor's failure to perform. Article 80 applies to three different case types. Firstly, cases of sole causation by the promisee. Secondly, cases of joint causation by both parties where the consequences of each...

Publishing International Counseling Articles

Science.gov (United States)

Hohenshil, Thomas H.; Amundson, Norman E.

2011-01-01

This article begins with a rationale for including international articles in the "Journal of Counseling & Development." Then, 2 general categories of international articles are described. First are articles that provide a general overview of counseling in a particular country. The 2nd category is more general and might involve international…

Significant Published Articles for Pharmacy Nutrition Support Practice in 2014 and 2015.

Science.gov (United States)

Dickerson, Roland N; Kumpf, Vanessa J; Blackmer, Allison B; Bingham, Angela L; Tucker, Anne M; Ybarra, Joseph V; Kraft, Michael D; Canada, Todd W

2016-07-01

To assist the pharmacy clinician engaged in nutrition support in staying current with the most pertinent literature. Several experienced board-certified clinical pharmacists engaged in nutrition support therapy compiled a list of articles published in 2014 and 2015 that they considered to be important to their practice. Only those articles available in print format were considered for potential inclusion. Articles available only in preprint electronic format were not evaluated. The citation list was compiled into a single spreadsheet where the author participants were asked to ascertain whether they considered the paper important to nutrition support pharmacy practice. A culled list of publications was then identified whereby the majority of author participants (at least 5 out of 8) considered the paper to be important. A total of 108 articles were identified; 36 of which were considered to be of high importance. An important guideline article published in early 2016, but not ranked, was also included. The top-ranked articles from the primary literature were reviewed. It is recommended that the informed pharmacist, who is engaged in nutrition support therapy, be familiar with the majority of these articles.

Paper relief architecture

NARCIS (Netherlands)

Latka, J.F.

2014-01-01

The article presents two contemporary projects of paper structures relief architecture designed and built by Shigeru Ban Architects and Voluntary Architect Network. Author of the article took part in design and construction process of one of the projects. The project of Yaan Nursery School, which

The top 50 cited articles on chordomas.

Science.gov (United States)

Ikpeze, Tochukwu; Mesfin, Addisu

2018-03-01

Chordomas are rare malignant primary tumors of the spine. In the mobile spine and sacrum an en-bloc resection is associated with decreased rates of recurrence. Our objective was to identify the top cited articles in chordoma research and to further analyze characteristics of these articles. In March 2017, we used ISI Web of Science (v5.11, Thomas Reuter, Philadelphia, Pennsylvania, USA) to search for the following key word: "chordoma". Articles were searched from 1900 to 2017. Articles were ranked based on number of citations. The results were evaluated to determine articles most clinically relevant to the management of chordomas. The top 50 articles that met the search criteria were further characterized on the basis of: title, author, citation density, journal of publication, year (and decade) of publication, institution and country of origin and paper topic. A total of 1,043 articles matched the search criteria. The most influential 50 articles were cited 65 to 290 times. The articles were published between 1926 and 2012, and all articles were published in English. Thirty-three publications (66%) originated from the United States and seven (14%) from Italy. Cancer accounted for the most frequent (n=9) destination journal followed by Journal of Bone and Joint Surgery (n=4). A total of 41 institutions contributed to the top 50 articles. The most common article types were: clinical 44% (n=22), papers that combined clinical and pathology findings 18% (n=9) and basic science research 14% (n=7). The top 50 cited articles on chordomas are predominantly clinical papers, arising from the United States and most frequently published in Cancer and Journal of Bone and Joint Surgery .

The fifty highest cited papers in anterior cruciate ligament injury.

Science.gov (United States)

Vielgut, Ines; Dauwe, Jan; Leithner, Andreas; Holzer, Lukas A

2017-07-01

The anterior cruciate ligament (ACL) is one of the most common injured knee ligaments and at the same time, one of the most frequent injuries seen in the sport orthopaedic practice. Due to the clinical relevance of ACL injuries, numerous papers focussing on this topic including biomechanical-, basic science-, clinical- or animal studies, were published. The purpose of this study was to determine the most frequently cited scientific articles which address this subject, establish a ranking of the 50 highest cited papers and analyse them according to their characteristics. The 50 highest cited articles related to Anterior Cruciate Ligament Injury were searched in Thomson ISI Web of Science® by the use of defined search terms. All types of scientific papers with reference to our topic were ranked according to the absolute number of citations and analyzed for the following characteristics: journal title, year of publication, number of citations, citation density, geographic origin, article type and level of evidence. The 50 highest cited articles had up to 1624 citations. The top ten papers on this topic were cited 600 times at least. Most papers were published in the American Journal of Sports Medicine. The publication years spanned from 1941 to 2007, with the 1990s and 2000s accounting for half of the articles (n = 25). Seven countries contributed to the top 50 list, with the USA having by far the most contribution (n = 40). The majority of articles could be attributed to the category "Clinical Science & Outcome". Most of them represent a high level of evidence. Scientific articles in the field of ACL injury are highly cited. The majority of these articles are clinical studies that have a high level of evidence. Although most of the articles were published between 1990 and 2007, the highest cited articles in absolute and relative numbers were published in the early 1980s. These articles contain well established scoring- or classification systems. The

Popular Science Articles for Chemistry Teaching

Directory of Open Access Journals (Sweden)

Ketevan Kupatadze

2017-07-01

Full Text Available The presented paper reviews popular science articles (these articles are published in online magazine “The Teacher” as one of the methods of chemistry teaching. It describes which didactic principles they are in line with and how this type of articles can be used in order to kindle the interest of pupils, students and generally, the readers of other specialties, in chemistry.  The articles review the main topics of inorganic/organic chemistry, biochemistry and ecological chemistry in a simple and entertaining manner. A part of the articles is about "household" chemistry. Chemical topics are related to poetry, literature, history of chemistry or simply, to fun news. The paper delineates the structure of popular science articles and the features of engaging students. It also reviews the teachers' and students' interview results about the usage of popular science articles in chemistry teaching process. The aforementioned pedagogical study revealed that the popular science articles contain useful information not only for the students of other specialties, but also for future biologists and ecologists (having chemistry as a mandatory subject at their universities. The articles are effectively used by teachers on chemistry lessons to kindle students' interest in this subject. DOI: http://dx.doi.org/10.17807/orbital.v9i3.960 

Surface treatment of ceramic articles

International Nuclear Information System (INIS)

Komvopoulos, K.; Brown, I.G.; Wei, B.; Anders, S.; Anders, A.; Bhatia, C.S.

1998-01-01

A process is disclosed for producing an article with improved ceramic surface properties including providing an article having a ceramic surface, and placing the article onto a conductive substrate holder in a hermetic enclosure. Thereafter a low pressure ambient is provided in the hermetic enclosure. A plasma including ions of solid materials is produced the ceramic surface of the article being at least partially immersed in a macroparticle free region of the plasma. While the article is immersed in the macroparticle free region, a bias of the substrate holder is biased between a low voltage at which material from the plasma condenses on the surface of the article and a high negative voltage at which ions from the plasma are implanted into the article. 15 figs

Dissertation to Journal Article: A Systematic Approach

Directory of Open Access Journals (Sweden)

Brychan Thomas

2012-01-01

Full Text Available The aim of the paper is to elucidate a systematic approach to convert a Masters dissertation into a journal article. This approach has involved a fundamental thematic review of the literature concerning the conversion of dissertations into journal articles. From these sources pertinent approaches, processes, lessons, and guidance have been noted and analysed. By undertaking this distillation of relevant material, to enable the efficient conversion of dissertations into journal articles, appropriate procedures and conclusions have been compiled. Findings present current thinking on the conversion of a dissertation into a journal paper in terms of how dissertations differ from journal articles, reframing for publication, rethinking the material, trimming the length, time taken to rewrite the material, specific lessons, and adapting for publication. Recommendations provided in the paper will enable staff to take this course of action when developing their publication portfolio to become more research active and to make an important contribution to the publication output of their department/school/faculty, especially with regard to assessment exercises such as the Research Excellence Framework. The value of the paper is that by following appropriate approaches, processes, and procedures it is possible to convert a good dissertation into a ranked journal article.

Fiscal year 1979 scientific and technical reports, articles, papers and presentations

Science.gov (United States)

White, O. L. (Compiler)

1979-01-01

This bibliography lists approximately 590 formal NASA technical reports, papers published in technical journals, presentations by MSFC personnel, and reports of MSFC contractors introduced into the NASA scientific and technical information system in 1979.

Analysis of citations to biomedical articles affected by scientific misconduct.

Science.gov (United States)

Neale, Anne Victoria; Dailey, Rhonda K; Abrams, Judith

2010-06-01

We describe the ongoing citations to biomedical articles affected by scientific misconduct, and characterize the papers that cite these affected articles. The citations to 102 articles named in official findings of scientific misconduct during the period of 1993 and 2001 were identified through the Institute for Scientific Information Web of Science database. Using a stratified random sampling strategy, we performed a content analysis of 603 of the 5,393 citing papers to identify indications of awareness that the cited articles affected by scientific misconduct had validity issues, and to examine how the citing papers referred to the affected articles. Fewer than 5% of citing papers indicated any awareness that the cited article was retracted or named in a finding of misconduct. We also tested the hypothesis that affected articles would have fewer citations than a comparison sample; this was not supported. Most articles affected by misconduct were published in basic science journals, and we found little cause for concern that such articles may have affected clinical equipoise or clinical care.

What makes a Scientific Article influential?

NARCIS (Netherlands)

H.P. van Dalen (Hendrik); K. Henkens

2000-01-01

textabstractIn this paper we examine, by means of a citation analysis, which factors influence the impact of articles published in demography journals between 1990 and 1992. Several quantifiable characteristics of the articles (characteristics with respect to authors, visibility, content and

Article

African Journals Online (AJOL)

2009-06-22

Jun 22, 2009 ... of the 80% of pregnant women having access to prevention of mother-to-child ... breviation for a complicated statement that includes, among other things, moral ... duce an outcome where frustrations of welfare interests become .... Article abortion and its related issues of moral status in prenatal life. The.

Article 27 of Competition Law and What Lies Beneath

Directory of Open Access Journals (Sweden)

Perdana A. Saputro

2011-09-01

Full Text Available This article discuss about Article 27 of Law No. 5 Year 1999 on the Restriction of Monopoly Practices and Unfair Business Practices (“Competition Law”. One may wonder the rigorousness to the application of Article 27 which arguably could ban any merger which meets market test without conducting any competitive assessment. For this, the law has been presumed that the acquisition or controlling of large market share from merger is per se illegality. Further, the effects of Article 27 would be discussed in this paper. A merger review itself is not an easy task and tends to bring complex issues that one needs to be dealt with. Things get more complicated when one deals with the merger application in developing countries since there are various aspects that need to be taken account by the respective antitrust authority (including Indonesia Obviously, every country needs to set up its competition law in accordance with its own economic characteristics and conditions. Many have argued as to point out the severe condition in market as a result of high concentration of competition. But more of them argued otherwise, as it could positively pushed on the market. This article would also include best practices from US and EU competition law practices regarding the issue at hand, as well as the relationship of merger control and practices in developing countries. The article offers suggestion with regard to the current approach to Article 27 of the Competition Law and from EU and US best practice which could be used for the benefit of Indonesia’s competition law especially to the application of Article 27.

DisArticle: a web server for SVM-based discrimination of articles on traditional medicine.

Science.gov (United States)

Kim, Sang-Kyun; Nam, SeJin; Kim, SangHyun

2017-01-28

Much research has been done in Northeast Asia to show the efficacy of traditional medicine. While MEDLINE contains many biomedical articles including those on traditional medicine, it does not categorize those articles by specific research area. The aim of this study was to provide a method that searches for articles only on traditional medicine in Northeast Asia, including traditional Chinese medicine, from among the articles in MEDLINE. This research established an SVM-based classifier model to identify articles on traditional medicine. The TAK + HM classifier, trained with the features of title, abstract, keywords, herbal data, and MeSH, has a precision of 0.954 and a recall of 0.902. In particular, the feature of herbal data significantly increased the performance of the classifier. By using the TAK + HM classifier, a total of about 108,000 articles were discriminated as articles on traditional medicine from among all articles in MEDLINE. We also built a web server called DisArticle ( http://informatics.kiom.re.kr/disarticle ), in which users can search for the articles and obtain statistical data. Because much evidence-based research on traditional medicine has been published in recent years, it has become necessary to search for articles on traditional medicine exclusively in literature databases. DisArticle can help users to search for and analyze the research trends in traditional medicine.

How Dentists Read a Technique Article: A Grounded Theory Investigation.

Science.gov (United States)

Chambers, David W; Lyon, Lucinda J

2017-12-01

To conduct an empirical investigation using qualitative techniques of the way dentists engage in the process of reading a technique-oriented journal article and what they pay attention to in the process. Grounded theory was used to identify how dentists read an article describing the fabrication of an interim prosthesis in the esthetic zone. Twenty-one experienced practitioners were videotaped, and their verbatim reflections were coded. The sequence of attending to various features of the paper was noted. Ninety-five percent of readers voiced specific, multiple attempts to identify or refine the main purpose of the article as they processed the material. All readers engaged in various activities to navigate through the article, including skipping and backtracking, and none "read" the article straight through. All readers also made repeated observations about the relevance of the technique to their personal practice situation. Eighty percent used some form of "distancing," whereby the content and value of the article were accepted, but the reader reserved the privilege of not being bound by the results because of technical, sponsorship, or methodological issues that "might be present." The quality of photographs was accepted as a proxy for the quality of technical work performed. Dentists actively customized the reading of a journal article that described a technical procedure. They imposed a non-linear structure for absorbing information and a standard of personal relevance, and, while accepting the results, created reasons for not necessarily having to accept them as applicable. The approach clinicians use in reading a procedural article may be different from the structure writers use in preparing a paper. © 2016 by the American College of Prosthodontists.

“It is merely a paper tiger.” Battle for increased tobacco advertising regulation in Indonesia: content analysis of news articles

Science.gov (United States)

Astuti, Putu Ayu Swandewi; Freeman, Becky

2017-01-01

Objective At the end of 2012, the Indonesian government enacted tobacco control regulation (PP 109/2012) that included stricter tobacco advertising, promotion and sponsorship (TAPS) controls. The PP did not ban all forms of TAPS and generated a great deal of media interest from both supporters and detractors. This study aims to analyse stakeholder arguments regarding the adoption and implementation of the regulation as presented through news media converge. Design Content analysis of 213 news articles reporting on TAPS and the PP that were available from the Factiva database and the Google News search engine. Setting Indonesia, 24 December 2012–29 February 2016. Methods Arguments presented in the news article about the adoption and implementation of the PP were coded into 10 supportive and 9 opposed categories. The news actors presenting the arguments were also recorded. Kappa statistic were calculated for intercoder reliability. Results Of the 213 relevant news articles, 202 included stakeholder arguments, with a total of 436 arguments coded across the articles. More than two-thirds, 69% (301) of arguments were in support of the regulation, and of those, 32.6% (98) agreed that the implementation should be enhanced. Of 135 opposed arguments, the three most common were the potential decrease in government revenue at 26.7% (36), disadvantage to the tobacco industry at 18.5% (25) and concern for tobacco farmers and workers welfare at 11.1% (15). The majority of the in support arguments were made by national government, tobacco control advocates and journalists, while the tobacco industry made most opposing arguments. Conclusions Analysing the arguments and news actors provides a mapping of support and opposition to an essential tobacco control policy instrument. Advocates, especially in a fragmented and expansive geographic area like Indonesia, can use these findings to enhance local tobacco control efforts. PMID:28864704

Communications article

KAUST Repository

Fariborzi, Hossein

2017-01-01

Seamless, covert communications using a communications system integrated or incorporated within an article of clothing is described. In one embodiment, the communications system is integrated or incorporated into a shoe insole and includes a haptic

Type of the Paper (Article

African Journals Online (AJOL)

EDO

Characterization of pure CS, CS/TPP and TA-CS/TPP ... application of nanotechnology in drug delivery has emerged ... adopted the same method described by ..... Health. Organization. Global. Tuberculosis Report. 2013. Available online:.

Selected Track and Field Articles. Sports Articles Reprint Series. First Edition.

Science.gov (United States)

Harkins, Dorothy, Ed.

This is a collection of articles from the 1962-70 DGWS Track and Field Guides and from National Institute Proceedings on the subject of girl's track and field activity. Included among the selections are articles on teaching outlines for track and field; distance running for girls and women; athletic injuries; hurdling for girls and women; adaption…

Scholarly context not found: one in five articles suffers from reference rot.

Directory of Open Access Journals (Sweden)

Martin Klein

Full Text Available The emergence of the web has fundamentally affected most aspects of information communication, including scholarly communication. The immediacy that characterizes publishing information to the web, as well as accessing it, allows for a dramatic increase in the speed of dissemination of scholarly knowledge. But, the transition from a paper-based to a web-based scholarly communication system also poses challenges. In this paper, we focus on reference rot, the combination of link rot and content drift to which references to web resources included in Science, Technology, and Medicine (STM articles are subject. We investigate the extent to which reference rot impacts the ability to revisit the web context that surrounds STM articles some time after their publication. We do so on the basis of a vast collection of articles from three corpora that span publication years 1997 to 2012. For over one million references to web resources extracted from over 3.5 million articles, we determine whether the HTTP URI is still responsive on the live web and whether web archives contain an archived snapshot representative of the state the referenced resource had at the time it was referenced. We observe that the fraction of articles containing references to web resources is growing steadily over time. We find one out of five STM articles suffering from reference rot, meaning it is impossible to revisit the web context that surrounds them some time after their publication. When only considering STM articles that contain references to web resources, this fraction increases to seven out of ten. We suggest that, in order to safeguard the long-term integrity of the web-based scholarly record, robust solutions to combat the reference rot problem are required. In conclusion, we provide a brief insight into the directions that are explored with this regard in the context of the Hiberlink project.

[Top-cited academic articles in acupuncture and moxibustion research].

Science.gov (United States)

Lu, Shengfeng; Zou, Ying; Wang, Rudong; Yu, Meiling

2017-08-12

To identify the 100 top-cited articles published in journals dedicated to acupuncture & moxibustion research and analyze their characteristics so as to explore its academic state. All the articles were collected from the China National Knowledge Infrastructure (CNKI, January 1, 1943 to December 25, 2016), Web of Science (January 1, 1950 to December 25, 2016), WANFANG Database (January 1, 1998 to December 25, 2016). The top-cited articles were selected and analyzed with regard to publication year, number of citations, journals, authors, country or region, institution, title, type and subject. One hundred and two articles were included, 43 Chinese articles and 59 English articles, cited between 146 and 505 times, and the average number of citation was 222. Of the 10 articles cited in the top 10, China and the United States had 4 articles respectively. These articles appeared in 44 journals, 24 articles in Chinese Acupuncture & Moxibustion , followed by 8 articles in Pain . All the articles belonged to 9 countries and regions, 47 articles from mainland China and 21 articles from the United State. Of the 14 institutes whose article number ranked at top 10, Tianjing University of TCM had 8 articles. The first authors published most papers were professor HAN Jisheng and Cherkin DC, each of whom had 4 articles. All the articles were categorized into basic science article (n=27), clinical research (n=33) and literature study (n=42). The main topics were pain diseases and brain impairment. This analysis of high cited articles reveals academic trends and directions of acupuncture and moxibustion. Acupuncture and moxibustion are more and more recognized by mainstream medicine in the world, but the academic dominance of China has been increasingly challenged by the United States, Germany and so on.

Elaborating Article 15 of the Paris Agreement: Facilitating Implementation and Promoting Compliance

International Nuclear Information System (INIS)

Biniaz, Susan

2017-10-01

As climate negotiations reopen on November, 6 at COP23 in Bonn to advance the concrete implementation of the different provisions of the Paris Agreement, this paper aims to take stock of the open questions of Article 15. They concern the role of the Committee responsible for 'facilitating compliance and promoting implementation'. First, the paper outlines what was already decided in Paris in 2015 as well as the issues still to be resolved by the end of 2018. These include the scope of its application, the means to initiate Article 15 as well as the outcomes that the committee can produce and the tools it should have at its disposal. Keeping in mind Paris Agreement's uniqueness and its philosophy, the author attempts to identify the added value of Article 15's mechanism and suggests ways to address the respective expectations and concerns of Parties, in order to progress towards a consensual resolution that is acceptable to a large number of Parties

Recommendations to write better scientific articles

Directory of Open Access Journals (Sweden)

Richard Threlfall (Author

2014-12-01

Full Text Available Disseminate results is one of the functions of the scientists, and we all must have approach to the knowledge to carry it a greater number of people. This is done by writing and publishing scientific articles. But though we all have good intentions and ours goals are the best, not always we get our papers are accepted and published in scientific journals. With the aim of providing assistance to achieve greater efficiency and effectiveness in our work, in this article the translation of some interesting recommendations for best writing scientific papers is presented.

Ceramic matrix composite article and process of fabricating a ceramic matrix composite article

Science.gov (United States)

Cairo, Ronald Robert; DiMascio, Paul Stephen; Parolini, Jason Robert

2016-01-12

A ceramic matrix composite article and a process of fabricating a ceramic matrix composite are disclosed. The ceramic matrix composite article includes a matrix distribution pattern formed by a manifold and ceramic matrix composite plies laid up on the matrix distribution pattern, includes the manifold, or a combination thereof. The manifold includes one or more matrix distribution channels operably connected to a delivery interface, the delivery interface configured for providing matrix material to one or more of the ceramic matrix composite plies. The process includes providing the manifold, forming the matrix distribution pattern by transporting the matrix material through the manifold, and contacting the ceramic matrix composite plies with the matrix material.

BreakingNews: Article Annotation by Image and Text Processing.

Science.gov (United States)

Ramisa, Arnau; Yan, Fei; Moreno-Noguer, Francesc; Mikolajczyk, Krystian

2018-05-01

Building upon recent Deep Neural Network architectures, current approaches lying in the intersection of Computer Vision and Natural Language Processing have achieved unprecedented breakthroughs in tasks like automatic captioning or image retrieval. Most of these learning methods, though, rely on large training sets of images associated with human annotations that specifically describe the visual content. In this paper we propose to go a step further and explore the more complex cases where textual descriptions are loosely related to the images. We focus on the particular domain of news articles in which the textual content often expresses connotative and ambiguous relations that are only suggested but not directly inferred from images. We introduce an adaptive CNN architecture that shares most of the structure for multiple tasks including source detection, article illustration and geolocation of articles. Deep Canonical Correlation Analysis is deployed for article illustration, and a new loss function based on Great Circle Distance is proposed for geolocation. Furthermore, we present BreakingNews, a novel dataset with approximately 100K news articles including images, text and captions, and enriched with heterogeneous meta-data (such as GPS coordinates and user comments). We show this dataset to be appropriate to explore all aforementioned problems, for which we provide a baseline performance using various Deep Learning architectures, and different representations of the textual and visual features. We report very promising results and bring to light several limitations of current state-of-the-art in this kind of domain, which we hope will help spur progress in the field.

27 CFR 46.208 - Unmerchantable articles.

Science.gov (United States)

2010-04-01

... Tubes Held for Sale on April 1, 2009 Inventories § 46.208 Unmerchantable articles. Articles that the... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Unmerchantable articles.... However, the dealer must segregate any such unmerchantable articles and include them in a separate section...

Article separation apparatus and method for unit operations

Science.gov (United States)

Pardini, Allan F.; Gervais, Kevin L.; Mathews, Royce A.; Hockey, Ronald L.

2010-06-22

An apparatus and method are disclosed for separating articles from a group of articles. The apparatus includes a container for containing one or more articles coupled to a suitable fluidizer for suspending articles within the container and transporting articles to an induction tube. A portal in the induction tube introduces articles singly into the induction tube. A vacuum pulls articles through the induction tube separating the articles from the group of articles in the container. The apparatus and method can be combined with one or more unit operations or modules, e.g., for inspecting articles, assessing quality of articles, or ascertaining material properties and/or parameters of articles, including layers thereof.

Construction of image database for newspapaer articles using CTS

Science.gov (United States)

Kamio, Tatsuo

Nihon Keizai Shimbun, Inc. developed a system of making articles' image database automatically by use of CTS (Computer Typesetting System). Besides the articles and the headlines inputted in CTS, it reproduces the image of elements of such as photography and graphs by article in accordance with information of position on the paper. So to speak, computer itself clips the articles out of the newspaper. Image database is accumulated in magnetic file and optical file and is output to the facsimile of users. With diffusion of CTS, newspaper companies which start to have structure of articles database are increased rapidly, the said system is the first attempt to make database automatically. This paper describes the device of CTS which supports this system and outline.

Application of Benford's law: a valuable tool for detecting scientific papers with fabricated data? : A case study using proven falsified articles against a comparison group.

Science.gov (United States)

Hüllemann, S; Schüpfer, G; Mauch, J

2017-10-01

In naturally occurring numbers the frequencies of digits 1-9 in the leading position are counterintuitively distributed because the frequencies of occurrence are unequal. Benford-Newcomb's law describes the expected distribution of these frequencies. It was previously shown that known fraudulent articles consistently violated this law. To compare the features of 12 known fraudulent articles from a single Japanese author to the features of 13 articles in the same research field from other Japanese authors, published during the same time period and identified with a Medline database search. All 25 articles were assessed to determine whether the data violated the law. Formulas provided by the law were used to determine the frequencies of occurrence for the first two leading digits in manually extracted numbers. It was found that all the known fraudulent papers violated the law and 6 of the 13 articles used for comparison followed the law. Assuming that the articles in the comparison group were not falsified or fabricated, the sensitivity of assessing articles with Benford-Newcomb's law was 100% (95% confidence interval CI: 73.54-100%) but the specificity was only 46.15% (95% CI: 19.22-74.87%) and the positive predictive value was 63.16% (95% CI: 38.36-83.71%). All 12 of the known falsified articles violated Benford-Newcomb's law, which indicated that this analysis had a high sensitivity. The low specificity of the assessment may be explained by the assumptions made about the articles identified for comparison. Violations of Benford-Newcomb's law about the frequencies of the leading digits cannot serve as proof of falsification but they may provide a basis for deeper discussions between the editor and author about a submitted work.

Panama Papers

DEFF Research Database (Denmark)

Harrington, Brooke

2016-01-01

Mossack Fonseca kept its clients largely on the right side of the law. Indeed, that’s entirely the point. This article for The Atlantic draws on my wealth management research to explain why most of what is revealed in the Panama Papers leak will not result in criminal prosecution for anyone...

Response to Trachtman's Article

Science.gov (United States)

Bardon, Jack I.

1985-01-01

This response to Trachtman's article (TM 510 399) argues that the Trachtman paper is inappropriate due to the time elapsed since the original Bardon proposal. The author acknowledges the difference in perspective between Trachtman and himself. He expresses the hope that discussion concerning this aspect of school psychology politics may be ended.…

Citation Semantic Based Approaches to Identify Article Quality

OpenAIRE

S. Sendhilkumar; E. Elakkiya; G.S. Mahalakshmi

2013-01-01

Analyzing the structure of research articles and th e relationship between the articles has always been important in bibliometrics research area. One of the methods for analyzing articles is by its citation. Normally researchers rank the article based on the citation count. But this quantity based evaluation is not sufficient due to various c itation types like Random citation, Guest citation. Our paper aims in providing a new me...

Scientific Journal Articles

Science.gov (United States)

These are abstracts of peer-reviewed articles, authored by Office of Children's Health Protection staff. They cover topics including risk assessment for early life stages, inhalation dosimetry, and manganese in drinking water.

ECOLOGICAL CHEMISTRY THROUGH POPULAR SCIENTIFIC ARTICLES

Directory of Open Access Journals (Sweden)

Ketevan KUPATADZE

2017-07-01

Full Text Available Popularization of Ecological Chemistry is the aim of scientific-popular articles, which are published in the online journal for teachers. With the articles of this type Ecological Chemistry is linked with literature and history. Due to this linkage articles, this module turns into an easily comprehensible one and it becomes fun. In all articles there is also included very useful and interesting information pertaining to Ecological Chemistry. It must be underlined the titles of such articles, because they should not only show the common meaning of article, but they should also attract readers.The utmost interest is generated by the historical papers, where chemical issues are connected with history. The period of alchemy is more popular and that’s why the alchemical stories are described in the articles.The outcome of the pedagogical experiment has made it clear, that such a method of teaching of Ecological Chemistry with scientific popular articles affects positively on school students motivation and changes their attitude towards the environmental pollution.CHIMIA ECOLOGICĂ ÎN ARTICOLELE ȘTIINȚIFICO-POPULAREPopularizarea Chimiei ecologice este scopul articolelor științifico-populare, care sunt publicate în reviste online pentru profesori. Prin intermediul articolelor de acest tip, Chimia ecologică este legată de literatură și istorie. Datorită respectivelor publicaţii, acest modul este ușor de înțeles și el devine distractiv. Toate articolele conțin informații foarte utile și interesante referitoarela Chimiaecologică. Trebuie de subliniat importanţa titlurilor acestor articole, deoarece ele ar trebui nu doar să redea succint înțelesul articolului, dar şi să atragă cititorul.Un interes deosebit trezesc documentele istorice, în cazul în care problemele chimiei sunt legate de istorie. Perioada alchimiei este mai populară, de aceea şi sunt descrise în articole poveștile alchimice.Rezultatul experimentului

The Top 100 Articles in the Medical Informatics: a Bibliometric Analysis.

Science.gov (United States)

Nadri, Hamed; Rahimi, Bahlol; Timpka, Toomas; Sedghi, Shahram

2017-08-19

The number of citations that a research paper receives can be used as a measure of its scientific impact. The objective of this study was to identify and to examine the characteristics of top 100 cited articles in the field of Medical Informatics based on data acquired from the Thomson Reuters' Web of Science (WOS) in October, 2016. The data was collected using two procedures: first we included articles published in the 24 journals listed in the "Medical Informatics" category; second, we retrieved articles using the key words: "informatics", "medical informatics", "biomedical informatics", "clinical informatics" and "health informatics". After removing duplicate records, articles were ranked by the number of citations they received. When the 100 top cited articles had been identified, we collected the following information for each record: all WOS database citations, year of publication, journal, author names, authors' affiliation, country of origin and topics indexed for each record. Citations for the top 100 articles ranged from 346 to 7875, and citations per year ranged from 11.12 to 525. The majority of articles were published in the 2000s (n=43) and 1990s (n=38). Articles were published across 10 journals, most commonly Statistics in medicine (n=71) and Medical decision making (n=28). The articles had an average of 2.47 authors. Statistics and biostatistics modeling was the most common topic (n=71), followed by artificial intelligence (n=12), and medical errors (n=3), other topics included data mining, diagnosis, bioinformatics, information retrieval, and medical imaging. Our bibliometric analysis illustrated a historical perspective on the progress of scientific research on Medical Informatics. Moreover, the findings of the current study provide an insight on the frequency of citations for top cited articles published in Medical Informatics as well as quality of the works, journals, and the trends steering Medical Informatics.

Article-level metrics and the periphery: an exploration of articles by Brazilian authors

Energy Technology Data Exchange (ETDEWEB)

Souza, I.V.P.; Gouveia, F.C.

2016-07-01

This work-in-progress paper describes an ongoing PhD study that aims to explore article-level metrics from a set of articles published by Brazilian researchers. It is argued that article-level metrics can offer a more nuanced and accurate picture of the influence of a particular work in comparison to journal-level metrics. However, if these new metrics rely on sources that exclude a large part of research from the periphery, they are at risk of simply preserving the present inequalities in the scholarly communication system. In order to understand how article-level metrics are or could be useful to the scientific community in the peripheries, we need to see what metrics are currently available, identify possible biases, and understand their meaning. We aim to contribute to this discussion with a case study focused on exploring a set of both traditional and alternative article-level metrics related to publications authored by Brazilian researchers. So far, few studies analyse article-level metrics for Brazilian publications, and most focus on Brazilian journals instead of researcher's affiliation. Our study will collect articles with DOIs registered by Brazilian researchers at the Lattes Platform, an information system maintained by the national Science, Technologies and Communications ministry. This exploration aims to address the following questions: (a) Which are the main article-level metrics available for journal articles authored by Brazilian researchers? What are the main sources of ALM data for Brazilian publications?; (b) Are there any disciplines, institutions, locations etc. that attract more mentions in the case of Brazilian articles? How do these metrics compare among themselves?; and (c) Do articlelevel metrics of publications by Brazilian researchers reflect patterns and trends observed in studies with researchers from other countries? (Author)

The Mock Research Paper

Science.gov (United States)

Clark, Carlton

2008-01-01

The mock research paper combines creative writing with academic writing and, in the process, breaks down that binary. This article describes a writing assignment that offers an introduction to the college research paper genre. This assignment helps students focus on crafting an argument and learning genre conventions while postponing until the…

Annotated Bibliography on Koreans in America. Working Papers on Asian American Studies.

Science.gov (United States)

Kim, Christopher; Takabashi, Michiko, Ed.

This annotated bibliography lists bibliographies, directories, articles, unpublished papers, manuals, citations, conference reports, and other documents dealing with Koreans in America. Topics considered include general history, immigration history, deportation cases, Korean students, State and Federal legislation affecting Koreans in America,…

Research Advances: Paper Batteries, Phototriggered Microcapsules, and Oil-Free Plastic Production

Science.gov (United States)

King, Angela G.

2010-01-01

Chemists continue to work at the forefront of materials science research. Recent advances include application of bioengineering to produce plastics from renewable biomass instead of petroleum, generation of paper-based batteries, and development of phototriggerable microcapsules for chemical delivery. In this article, the author provides summaries…

Advanced Change Theory Revisited: An Article Critique

Directory of Open Access Journals (Sweden)

R. Scott Pochron

2008-12-01

Full Text Available The complexity of life in 21st century society requires new models for leading and managing change. With that in mind, this paper revisits the model for Advanced Change Theory (ACT as presented by Quinn, Spreitzer, and Brown in their article, “Changing Others Through Changing Ourselves: The Transformation of Human Systems” (2000. The authors present ACT as a potential model for facilitating change in complex organizations. This paper presents a critique of the article and summarizes opportunities for further exploring the model in the light of current trends in developmental and integral theory.

ABC's of Writing Medical Papers in English

International Nuclear Information System (INIS)

Baron, Todd H.

2012-01-01

Publishing medical papers in English is important as English remains the predominant language for most medical papers (both electronic and traditional journal publications). In addition, journals with the highest impact factors are published in English and a publication in English thus enhances the visibility of authors and their institutions, and is important for promotion in some academic centers. This article reviews the basic principles that will help you successfully publish a manuscript in English. Although other books and articles are available on this subject, there are relatively few references. The present article is based on this author's experience of publishing nearly 400 articles in English. It will emphasize writing original articles, but the principles can be applied to virtually any type of manuscript.

Analysis of scientific papers included in the sciences citation index expanded written by South korean plastic surgeons: 2001-2010.

Science.gov (United States)

Go, Ju Young; Mun, Goo-Hyun; Jeon, Byung-Joon; Lim, So-Young; Pyon, Jai-Kyong; Bang, Sa-Ik; Oh, Kap Sung; Shin, Myoung-Soo

2012-01-01

The purpose of our study was to analyze scientific papers published by South Korean plastic surgeons in journals included in the Science Citation Index Expanded (SCIE), and to evaluate the publication and research activities of Korean plastic surgeon. We conducted a survey of SCIE papers in the field of plastic surgery published by South Korean authors between 2001 and 2010 using Web of Science software. We further analyzed these results according to the number of publications per year, journals, institution, and type of papers. We also compared the total number of citations to published scientific papers. We analyzed the rank of South Korea among other countries in representative journals. Overall, 667 papers were published by South Korean authors between 2001 and 2010. The number of publications increased dramatically from 2003 (n=31) to 2010 (n=139). Subsequently, the ten most productive Korean medical colleges were identified. All published papers received 2,311 citations and the citation to paper ratio was 3.49. The rank of Korea among other countries in terms of the number of published papers remained in the top 10 during the recent 10 years. Publication output of Korean plastic surgeon over the last 10 years showed a remarkable growth in terms of quantity and quality. Currently, Korea is among the top six countries in representative plastic surgery journals. Korean plastic surgeons have played a central role in this progress, and it is anticipated that they will continue to do so in the future.

Paper as a platform for sensing applications and other devices: a review.

Science.gov (United States)

Mahadeva, Suresha K; Walus, Konrad; Stoeber, Boris

2015-04-29

Paper is a ubiquitous material that has various applications in day to day life. A sheet of paper is produced by pressing moist wood cellulose fibers together. Paper offers unique properties: paper allows passive liquid transport, it is compatible with many chemical and biochemical moieties, it exhibits piezoelectricity, and it is biodegradable. Hence, paper is an attractive low-cost functional material for sensing devices. In recent years, researchers in the field of science and engineering have witnessed an exponential growth in the number of research contributions that focus on the development of cost-effective and scalable fabrication methods and new applications of paper-based devices. In this review article, we highlight recent advances in the development of paper-based sensing devices in the areas of electronics, energy storage, strain sensing, microfluidic devices, and biosensing, including piezoelectric paper. Additionally, this review includes current limitations of paper-based sensing devices and points out issues that have limited the commercialization of some of the paper-based sensing devices.

Asian-Pacific Papers. Occasional Papers Number 10.

Science.gov (United States)

McCarthy, Brian, Ed.

Sixteen papers are presented. Topics covered include language teaching, discourse analysis, code switching, phonetics, language and cultural identity, and descriptive and comparative studies. All presenters were from the Asia-Pacific area of the world. Papers include: "The Baba Malay Lexicon: Hokkien Loanwords in Baba Malay" (Anne…

Neutron absorbing article

International Nuclear Information System (INIS)

Naum, R.G.; Owens, D.P.; Dooher, G.I.

1979-01-01

A neutron absorbing article, in flat plate form and suitable for use in a storage rack for spent fuel, includes boron carbide particles, diluent particles and a solid, irreversibly cured phenolic polymer cured to a continuous matrix binding the boron carbide and diluent particles. The total conent of boron carbide and diluent particles is a major proportion of the article and the content of cured phenolic polymer present is a minor proportion. By regulation of the ratio of boron carbide particles to diluent particles, normally within the range of 1:9 and 9:1 and preferably within the range of 1:5 to 5:1, the neutron absorbing activity of the product may be controlled, which facilitates the manufacture of articles of particular absorbing activities best suitable for specific applications

Korea's Contribution to Radiological Research Included in Science Citation Index Expanded, 1986-2010

International Nuclear Information System (INIS)

Ku, You Jin; Yoon, Dae Young; Lim, Kyoung Ja; Baek, Sora; Seo, Young Lan; Yun, Eun Joo; Choi, Chul Soon; Bae, Sang Hoon; Lee, Hyun; Ju, Young Su

2012-01-01

To evaluate scientific papers published by Korean radiologists in the Science Citation Index Expanded (SCIE) radiology journals, between 1986 and 2010. The Institute for Scientific Information Web of Knowledge-Web of Science (SCIE) database was searched for all articles published by Korean radiologists, in SCIE radiology journals, between 1986 and 2010. We performed the analysis by typing 'Korea' and 'radiol' in the address section and selecting the subject area of 'Radiology, Nuclear Medicine, and Medical Imaging' with the use of the general search function of the software. Analyzed parameters included the total number of publications, document types, journals, and institutions. In addition, we analyzed where Korea ranks, compared to other countries, in terms of the number of published articles. All these data were analyzed according to five time periods: 1986-1990, 1991-1995, 1996-2000, 2001-2005, and 2006-2010. Overall, 4974 papers were published by Korean radiologists, in 99 different SCIE journals, between 1986 and 2010, of which 4237 (85.2%) were article-type papers. Of the total 115395 articles, worldwide, published in radiology journals, Korea's share was 3.7%, with an upward trend over time (p < 0.005). The journal with the highest number of articles was the American Journal of Roentgenology (n 565, 13.3%). The institution which produced the highest number of publications was Seoul National University (n = 932, 22.0%). The number of scientific articles published by Korean radiologists in the SCIE radiology journals has increased significantly between 1986 and 2010. Korea was ranked 4th among countries contributing to radiology research during the last 5 years.

Are medical articles highlighting detailed statistics more cited?

Directory of Open Access Journals (Sweden)

Mike Thelwall

2015-06-01

Full Text Available When conducting a literature review, it is natural to search for articles and read their abstracts in order to select papers to read fully. Hence, informative abstracts are important to ensure that research is read. The description of a paper's methods may help to give confidence that a study is of high quality. This article assesses whether medical articles that mention three statistical methods, each of which is arguably indicative of a more detailed statistical analysis than average, are more highly cited. The results show that medical articles mentioning Bonferroni corrections, bootstrapping and effect size tend to be 7%, 8% and 15% more highly ranked for citations than average, respectively. Although this is consistent with the hypothesis that mentioning more detailed statistical techniques generate more highly cited research, these techniques may also tend to be used in more highly cited areas of Medicine.

Reflective article having a sacrificial cathodic layer

Science.gov (United States)

Kabagambe, Benjamin; Buchanan, Michael J.; Scott, Matthew S.; Rearick, Brian K.; Medwick, Paul A.; McCamy, James W.

2017-09-12

The present invention relates to reflective articles, such as solar mirrors, that include a sacrificial cathodic layer. The reflective article, more particularly includes a substrate, such as glass, having a multi-layered coating thereon that includes a lead-free sacrificial cathodic layer. The sacrificial cathodic layer includes at least one transition metal, such as a particulate transition metal, which can be in the form of flakes (e.g., zinc flakes). The sacrificial cathodic layer can include an inorganic matrix formed from one or more organo-titanates. Alternatively, the sacrificial cathodic layer can include an organic polymer matrix (e.g., a crosslinked organic polymer matrix formed from an organic polymer and an aminoplast crosslinking agent). The reflective article also includes an outer organic polymer coating, that can be electrodeposited over the sacrificial cathodic layer.

An Analysis of the "Classic" Papers in Aesthetic Surgery.

Science.gov (United States)

Joyce, Cormac W; Joyce, K M; Kelly, John C; Kelly, Jack L; Carroll, Sean M; Sugrue, Conor

2015-02-01

Over the past 50 years, there has been a significant increase in published articles in the medical literature. The aesthetic surgery literature is vast, consisting of a plethora of diverse articles written by a myriad of illustrious authors. Despite this considerable archive of published material, it remains nebulous as to which precise papers have had the greatest impact on our specialty. The aim of our study was to identify and analyse the characteristics of the top 50 papers in the field of aesthetic surgery in the published literature. The 50 most cited papers were identified in several surgical journals through the Web of Science. The articles were ranked in order of the number of citations received. These classic 50 papers were analysed for article type, their journal distribution, level of evidence as well as geographic and institutional origin. Six journals contributed to the top 50 papers in aesthetic surgery with Plastic and Reconstructive Surgery contributing the most with 31 papers.

A summary of trauma and trauma-related papers published in BJOMS during 2008-2009.

Science.gov (United States)

Kusanale, Atul; Mackenzie, Neil; Arakeri, Gururaj; McLeod, Niall; Brennan, Peter A

2010-09-01

This paper provides a summary of the 49 trauma and related papers published in British Journal of Oral and Maxillofacial Surgery during the period January 2008 to December 2009. 16/49 (32%) of these publications were full length articles, which covered areas such as epidemiology, service provision, materials and operative surgery. In addition there were other articles including short communications, technical notes, letters to the editor and interesting cases. Whilst fewer full length articles were published compared to the other sub-specialties, it was reassuring to see that the studies represent all aspects of trauma. More basic science and randomized control studies relating to trauma need to be encouraged. Copyright 2010 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Cancer articles in weekly magazines: useful media to deliver cancer information to the public?

Science.gov (United States)

Nagata, Masayoshi; Takita, Morihito; Kishi, Yukiko; Kodama, Yuko; Matsumura, Tomoko; Murashige, Naoko; Homma, Yukio; Kami, Masahiro

2013-04-01

Japanese weekly magazines, which have a circulation of over 2 700 000, play important roles in communicating with the public. They offer a wide range of information, entertainment, gossip, politics and economics, and often include articles on cancer. However, cancer articles in magazines have not been systematically analyzed. We investigated cancer-related articles and advertisements in six major Japanese weekly magazines to demonstrate trends in public interest regarding cancer. The total number of articles assessed from July 2009 to December 2010 was 36 914, of which 696 (1.9%) were cancer articles. The total number of advertisements was 21 718, of which 340 (1.6%) were related to cancer. The number of cancer articles demonstrated an upward trend during the study period. Articles focused on lung (n = 145) and urogenital cancer (n = 122). The most common content comprised therapies and diagnosis (n = 340) and case reports on individual patients (n = 160). After a famous Japanese comedian revealed his prostate cancer diagnosis, the number of articles on prostate cancer increased from 2.0 to 6.6 per month. Immunotherapy including some dubious folk therapies was the most frequently reported cancer therapy in articles and advertisements (30.4%). A small group of oncologists were repeatedly referred to in comment sources; 35.6% of comments were presented by only five doctors. Cancer articles in weekly magazines are common paper media for providing cancer information to the public. However, the information provided might place emphasis on unestablished treatments or biased opinions.

[How to write and publish a scientific article in stomatology].

Science.gov (United States)

Gao, X J

2017-12-09

The general principles and key points in writing of a scientific article in stomatology were interpreted based on the national guideline and the author's personal experiences in the present article. Efforts should be made by the authors focusing on core information, refinement and description of their papers. In the second half of the article, the general process of paper review was introduced. The article also gave suggestions on how to response to the reviewers' questions. It is well recognized that a good scientific journal was created by good authors, good reviewers and good editors. The author proposed that efforts by above mentioned three parties should be gathered to make more valuable, delicately designed and well performed clinical research articles be published.

19 CFR 4.69 - Shipping articles.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Shipping articles. 4.69 Section 4.69 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.69 Shipping articles. No vessel of the U.S... officer, of the shipping articles agreements, including any seaman's allotment agreement, required by 46 U...

Green paper with green electricity? Greening strategies of Nordic pulp and paper industry

International Nuclear Information System (INIS)

Luukkanen, Jyrki

2003-01-01

The article studies the opinions of paper producers in Finland and Norway and Finnish power producers about the eco-labelling of electricity and its possible effects on pulp and paper industry. The point of departure in the study is how large industrial consumers mediate concerns of environmental issues to the producers. Based on interviews of environmental, energy/power and marketing sector representatives of the companies the article analyses different views related to the criteria of green labelling, green electricity and papermaking, energy sources as image sources, environmental image of papermaking and the threats and opportunities the companies face in the changing international context. The analysis of the interviews is contextualised in the endogenous market based regulation framework of electricity market regulation

Digging in to Link Analysis Researches in Iran and all around the World: a Review Article

Directory of Open Access Journals (Sweden)

Fatemeh Nooshinfard

2011-10-01

Full Text Available Increasing websites quantity, specially scientific websites, there were many researches with concern of link analysis using webometrics by librarian and other scholars in different academic majors around the world. The purpose of this article was link analysis of all link analysis related papers from the beginning to February 19th 2009. The research based on Weiner, Amick, and Lee searching model in 2008, this study included 96 refereed papers extracted from international databases like Springer, Proquest, Sage, Emerald, IEEE, Science Direct and national databases such as Magiran and SID. These papers were studied focusing on their different parts like authors, affiliated organizations, purpose, methods, tools, keywords, date of publishing, publication, indexing databases and their suggestions. Moreover, analyzing those papers and studying any related models were the other purposes of the current article. The findings have been categorized and analyses in ten different sections.

RARD: The Related-Article Recommendation Dataset

OpenAIRE

Beel, Joeran; Carevic, Zeljko; Schaible, Johann; Neusch, Gabor

2017-01-01

Recommender-system datasets are used for recommender-system evaluations, training machine-learning algorithms, and exploring user behavior. While there are many datasets for recommender systems in the domains of movies, books, and music, there are rather few datasets from research-paper recommender systems. In this paper, we introduce RARD, the Related-Article Recommendation Dataset, from the digital library Sowiport and the recommendation-as-a-service provider Mr. DLib. The dataset contains ...

Einstein's Annalen Papers: The Complete Collection 1901 - 1922

Science.gov (United States)

Renn, Jürgen

2005-05-01

In 1905, Einstein's Annus Mirabilis, Albert Einstein made three discoveries concerning the foundations of nature which form the basis of his fame as a physicist. These revolutionary papers on the light-quantum hypothesis, Brownian motion, and special relativity, were published in the journal "Annalen der Physik". All three are now established as pillars of modern science and its applications in technology and are an indispensable part of the modern world. This volume presents some of the most significant original papers which Albert Einstein ever wrote. It includes the facsimiles of the three revolutionary papers of 1905. In addition it contains papers which show the consequences of the ground-breaking ideas of these seminal papers from E=mc² to the quantum theory of specific heats. It also features Einstein's first exposition of his new general theory of relativity. Introducing the original German papers the science historians Jürgen Renn (MPI for the History of Science, Berlin), David C. Cassidy (Hofstra University, Hempstead), Michel Janssen (University of Minnesota), and Robert Rynasiewicz (John Hopkins University) complement and comment the collection with topical articles.

Thermal and Fluid Modeling of the CRYogenic Orbital TEstbed (CRYOTE) Ground Test Article (GTA)

Science.gov (United States)

Piryk, David; Schallhorn, Paul; Walls, Laurie; Stopnitzky, Benny; Rhys, Noah; Wollen, Mark

2012-01-01

The purpose of this study was to anchor thermal and fluid system models to data acquired from a ground test article (GTA) for the CRYogenic Orbital TEstbed - CRYOTE. To accomplish this analysis, it was broken into four primary tasks. These included model development, pre-test predictions, testing support at Marshall Space Flight Center (MSFC} and post-test correlations. Information from MSFC facilitated the task of refining and correlating the initial models. The primary goal of the modeling/testing/correlating efforts was to characterize heat loads throughout the ground test article. Significant factors impacting the heat loads included radiative environments, multi-layer insulation (MLI) performance, tank fill levels, tank pressures, and even contact conductance coefficients. This paper demonstrates how analytical thermal/fluid networks were established, and it includes supporting rationale for specific thermal responses seen during testing.

Characteristics of Highly Cited Articles in Interventional Cardiology.

Science.gov (United States)

Khan, Muhammad Shahzeb; Usman, Muhammad Shariq; Fatima, Kaneez; Hashmani, Nauman; Siddiqi, Tariq Jamal; Riaz, Haris; Khan, Abdur Rahman; Khosa, Faisal

2017-12-01

Citation classics have been published in many fields of medicine; however, none have focused on interventional cardiology. The goal of this study was to identify the top 100 articles in the field of interventional cardiology and highlight their important trends and characteristics. The Scopus database was used by 2 independent reviewers to extract the top 100 articles using a variety of keywords. We found articles published between 1953 and 2012. Majority (n = 78) of the top 100 articles were published between 1996 and 2010, and the United States was affiliated with the highest number of articles in our list (n = 68). Over half (n = 54) the articles were funded. Private funding was correlated with higher citations (p = 0.036). A third (n = 33) of the papers had authors with conflicts of interest; however, conflict of interest had no effect on citations (p = 0.837). Majority (n = 57) of the articles studied coronary angioplasty and stenting; followed by coronary angiography (n = 14). Women were underrepresented, with only 11 female first authors in the top 100 papers, and only 1 female in the list of top authors who had 5 or more publications. In conclusion, the following features define the typical highly cited article in interventional cardiology-a clinical trial conducted in the United States, which studies angioplasty, and has been published relatively recently in a high-impact journal by a male first author. Copyright © 2017 Elsevier Inc. All rights reserved.

Academic Primer Series: Five Key Papers about Study Designs in Medical Education.

Science.gov (United States)

Gottlieb, Michael; Chan, Teresa M; Fredette, Jenna; Messman, Anne; Robinson, Daniel W; Cooney, Robert; Boysen-Osborn, Megan; Sherbino, Jonathan

2017-06-01

A proper understanding of study design is essential to creating successful studies. This is also important when reading or peer reviewing publications. In this article, we aimed to identify and summarize key papers that would be helpful for faculty members interested in learning more about study design in medical education research. The online discussions of the 2016-2017 Academic Life in Emergency Medicine Faculty Incubator program included a robust and vigorous discussion about education study design, which highlighted a number of papers on that topic. We augmented this list of papers with further suggestions by expert mentors. Via this process, we created a list of 29 papers in total on the topic of medical education study design. After gathering these papers, our authorship group engaged in a modified Delphi approach to build consensus on the papers that were most valuable for the understanding of proper study design in medical education. We selected the top five most highly rated papers on the topic domain of study design as determined by our study group. We subsequently summarized these papers with respect to their relevance to junior faculty members and to faculty developers. This article summarizes five key papers addressing study design in medical education with discussions and applications for junior faculty members and faculty developers. These papers provide a basis upon which junior faculty members might build for developing and analyzing studies.

Results From PAPER/HERA

Science.gov (United States)

Pober, Jonathan C.

2018-05-01

The Precision Array for Probing the Epoch of Reionization (PAPER) was a first-generation 21 cm cosmology experiment with the specific goal of detecting the power spectrum of the 21 cm emission from the Epoch of Reionization. Analysis of PAPER data is still ongoing, but lessons learned from PAPER to date have played a critical role in designing the next-generation Hydrogen Epoch of Reionization Array (HERA) experiment. This article reviews five key design choices made by PAPER: use of a non-imaging configuration, redundancy, short baselines, small antenna elements, and a large instantaneous bandwidth. We describe the impact of these choices and the role they played in designing HERA.

100 top-cited scientific papers in limb prosthetics.

Science.gov (United States)

Eshraghi, Arezoo; Osman, Noor Azuan Abu; Gholizadeh, Hossein; Ali, Sadeeq; Shadgan, Babak

2013-11-17

Research has tremendously contributed to the developments in both practical and fundamental aspects of limb prosthetics. These advancements are reflected in scientific articles, particularly in the most cited papers. This article aimed to identify the 100 top-cited articles in the field of limb prosthetics and to investigate their main characteristics. Articles related to the field of limb prosthetics and published in the Web of Knowledge database of the Institute for Scientific Information (ISI) from the period of 1980 to 2012. The 100 most cited articles in limb prosthetics were selected based on the citation index report. All types of articles except for proceedings and letters were included in the study. The study design and level of evidence were determined using Sackett's initial rules of evidence. The level of evidence was categorized either as a systematic review or meta-analysis, randomized controlled trial, cohort study, case-control study, case series, expert opinion, or design and development. The top cited articles in prosthetics were published from 1980 to 2012 with a citation range of 11 to 90 times since publication. The mean citation rate was 24.43 (SD 16.7) times. Eighty-four percent of the articles were original publications and were most commonly prospective (76%) and case series studies (67%) that used human subjects (96%) providing level 4 evidence. Among the various fields, rehabilitation (47%), orthopedics (29%), and sport sciences (28%) were the most common fields of study. The study established that studies conducted in North America and were written in English had the highest citations. Top cited articles primarily dealt with lower limb prosthetics, specifically, on transtibial and transradial prosthetic limbs. Majority of the articles were experimental studies.

7 CFR 301.89-2 - Regulated articles.

Science.gov (United States)

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Regulated articles. 301.89-2 Section 301.89-2... SERVICE, DEPARTMENT OF AGRICULTURE DOMESTIC QUARANTINE NOTICES Karnal Bunt § 301.89-2 Regulated articles. The following are regulated articles: (a) Conveyances, including trucks, railroad cars, and other...

Quantitative Evaluation of Iranian Radiology Papers and Its Comparison with Selected Countries

International Nuclear Information System (INIS)

Ghafoori, Mahyar; Emami, Hasan; Sedaghat, Abdolrasoul; Ghiasi, Mohammad; Shakiba, Madjid; Alavi, Manijeh

2014-01-01

Recent technological developments in medicine, including modern radiology have promoted the impact of scientific researches on social life. The scientific outputs such as article and patents are products that show the scientists’ attempt to access these achievements. In the current study, we evaluate the current situation of Iranian scientists in the field of radiology and compare it with the selected countries in terms of scientific papers. For this purpose, we used scientometric tools to quantitatively assess the scientific papers in the field of radiology. Radiology papers were evaluated in the context of medical field audit using retrospective model. We used the related databases of biomedical sciences for extraction of articles related to radiology. In the next step, the situation of radiology scientific products of the country were determined with respect to the under study regional countries. Results of the current study showed a ratio of 0.19% for Iranian papers in PubMed database published in 2009. In addition, in 2009, Iranian papers constituted 0.29% of the Scopus scientific database. The proportion of Iranian papers in the understudy region was 7.6%. To diminish the gap between Iranian scientific radiology papers and other competitor countries in the region and achievement of document 2025 goals, multifold effort of the society of radiology is necessary

Article Article

African Journals Online (AJOL)

2012-12-03

Dec 3, 2012 ... Article. The use of standardised patients (SPs) in medical education is well ... those taught using inpatients6 and virtual patients.7 The use of the ..... the reality that principles taught in theory do not always translate into the.

An Auction Market for Journal Articles

NARCIS (Netherlands)

Prüfer, J.; Zetland, D.

2007-01-01

Economic articles are published very slowly. We believe this results from the poor incentives referees face. We recommend that an auction market replace the current, push system for submitting papers and demonstrate that our proposed market has a stable, Pareto-improving equilibrium. Besides the

An Auction Market for Journal Articles

NARCIS (Netherlands)

Prüfer, J.; Zetland, D.

2007-01-01

Economic articles are published very slowly. We believe this results mainly from the poor incentives referees face. We recommend that an auction market replace the current system for submitting papers and demonstrate a strict Pareto-improvement of equilibrium. Besides the benefits of speed, this

[Articles on elderly in Serbian medical journals].

Science.gov (United States)

Despotović, Nebojsa; Milosević, Dragoslav P; Erceg, Predrag; Davidović, Mladen

2009-01-01

Population aging is a feature of all countries in the world. According to statistics, the Republic of Serbia is one of the countries with the majority of the elderly. Taking this into account, are articles on the elderly well represented in domestic medical journals? The aim of the paper was to determine whether there was a sufficient number of articles on the elderly in domestic medical journals. The articles on the elderly were searched using search engines in domestic and foreign medical journals for the last 5 years compared with the number of articles on children in the same publications for the same period. In the Serbian Citation Index, 11 articles on the topic of the elderly, and 487 on children were registered. In Srpski arhivza celokupno lekarstvo, there was registered only one article on the topic of the elderly, and 30 on children. In Vojnosanitetskipregled, 2 articles on the elderly and 13 on children were registered (p articles on the elderly and 759 articles on children; in the JAMA, there were 63 articles on the elderly and 303 articles on children; and in The Lancet, in the last five years, 46 articles on the elderly and 148 articles on children were published. The themes of the elderly were rarely represented in Serbian medical journals.This has reduced the interest of physicians in medical problems of this growing population of patients and further sent them away from making standards in the diagnosis and treatment of the elderly.

Pediatric Viral Exanthema: A Review Article

Directory of Open Access Journals (Sweden)

Mohammed Jafar Saffar

2017-04-01

Full Text Available Context Many diseases caused by viral agents are associated with fever and cutaneous manifestations. Viral exanthema is a widespread nonspecific skin rash, commonly characterized by generalized eruption of erythematous macules and papular lesions. Although these rashes are mostly benign and self-limited, some may be serious and life-threatening. Differentiation between severe and benign types is clinically important and life-saving. Evidence Acquisition In this narrative review, electronic databases, including Google Scholar, Science Direct, PubMed (including Medline, Web of Science, Scientific Information Database, and Scopus, were searched. We conducted a narrative review of papers published on pediatric viral exanthema during 2000 - 2016. The used keywords included “viral exanthema”, “fever”, and “skin rash”. Articles on skin rash, caused by drug reactions or nonviral exanthema, were excluded. Results Different viral agents can cause different types of skin reactions. Cutaneous manifestations and skin rashes can be categorized, based on the form of the rash (macular, papular, vesicular, blistery, petechial, and purpuric or the general term, which denotes illnesses such as measles-like morbilliform rash, rubella or rubelliform rash, and scarlatiniform rash, a scarlet-fever like infection. Conclusions Based on the findings, a systematic approach relying on accurate history-taking and analysis of epidemiological cues and rash characteristics is of great significance.

Citation practices in Slovak and English linguistic research papers

Directory of Open Access Journals (Sweden)

Walková Milada

2017-12-01

Full Text Available Citation in research articles is an important gateway to acceptance by academic community. When citing others, scholars follow the conventions of the genre, of the academic discipline, and of their culture. This paper focuses on the cultural aspects of citation by comparing and contrasting a corpus of linguistic papers written in English and in Slovak. The results show that while English native writers prefer making their papers more objective through a higher incidence of generalisations and reporting verbs denoting the process of research, Slovak native writers opt for making the cited authors more visible by a greater amount of integral citations and reporting verbs denoting mental states and processes. A higher number of quotations, including floating quotations, suggests that Slovak scholars have a high regard for the work of others.

7 CFR 301.87-2 - Regulated articles.

Science.gov (United States)

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Regulated articles. 301.87-2 Section 301.87-2... Regulations § 301.87-2 Regulated articles. (a) Sugarcane plants, whole or in part, including true seed and...) Any other product, article, or means of conveyance, of any character whatsoever, not covered by...

Exploring Paper.

Science.gov (United States)

Brand, Judith, Ed.

1999-01-01

Exploratorium Magazine communicates ideas that exhibits cannot easily demonstrate, extending the museum beyond its physical walls. This issue takes an in-depth look at the science and history of paper. Topics include: (1) Fascinating Facts about Paper; (2) A Closer Look at the Paper in This Magazine; (3) Handmade Paper; (4) Paper Airplanes; (5)…

Spanish comparative phrases of equality with a definite article

Directory of Open Access Journals (Sweden)

P. Pablo Devís Márquez

2017-01-01

Full Text Available In the long-standing controversy over the so-called constructions with an emphatic or quantifying definite article in Spanish, a few authors have noticed the comparative import of constructions with a quantifying article or with article and a null quantifying modifier (No es lo inteligente que era su padre. The aim of this paper is to provide a descriptive analysis capable of drawing a grammatical distinction between constructions with a definite article and comparative value and non-comparative structures with an emphatic definite article. In the former case, the article is not an independent quantifier, but a discontinuous constituent in a phrase functioning as the quantifying modifier of the comparative head.

How to write and publish a scientific paper

CERN Document Server

Day, Robert A

2011-01-01

Writing and publishing journal articles are crucial to scientific careers. Unfortunately, many young scientists find the process of communicating scientific information effectively a complete mystery. By providing practical, readable, and sometimes humorous guidance, this book helps researchers gain the knowledge, skills, and confidence to succeed in communicating about their work. This seventh edition of "How to Write and Publish a Scientific Paper" contains 41 chapters focused upon two separate tasks: how to write the respective sections of a scientific paper and how to publish the paper. Other related topics include approaching a writing project, following ethical principles in scientific publishing, preparing oral presentations and poster presentations, writing grant proposals, and working with the popular media. The authors provide considerable guidance on appropriate scientific writing style as well as an extensive list of words and expressions to avoid - and supply the language to substitute for them.

Formulating the Right Title for a Research Article.

Science.gov (United States)

Bavdekar, Sandeep B

2016-02-01

Title is an important part of the article. It condenses article content in a few words and captures readers' attention. A good title for a research article is the one which, on its own, is able to introduce the research work to the fullest extent, but in a concise manner. Writing scientific titles that are informative and attractive is a challenging task. This communication describes the importance of titles and the methods of creating appropriate titles for research papers. © Journal of the Association of Physicians of India 2011.

Evolution of the scientific paper

Energy Technology Data Exchange (ETDEWEB)

Harmon, J.E.

1992-09-01

The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper`s development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965-?).

27 CFR 46.204 - Articles in transit.

Science.gov (United States)

2010-04-01

... Tubes Held for Sale on April 1, 2009 Inventories § 46.204 Articles in transit. The dealer must include articles subject to floor stocks tax that are in transit in the inventory if the dealer holds title to... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Articles in transit. 46...

Index to place of publication of ASME Papers, 1978--1988

International Nuclear Information System (INIS)

Youngen, G.K.

1990-06-01

This index is a list of American Society of Mechanical Engineers (ASME) Papers that are reprinted in the ASME Transactions series of journals. ASME Papers are often cited only by their paper number, making it difficult to determine if the article has ever appeared in print in the journal literature. This index will be useful for tracking down those papers published as journal articles by the ASME. It will also serve as a guide for retention for subscribers to the ASME Papers and Transaction Series. Paper numbers that appear in the journals may be weeded from the collection of ASME Papers

Managing the exploration process: conference papers

International Nuclear Information System (INIS)

1999-01-01

The conference includes eight articles on the theme of the meeting including: I - creating an environment that fosters exploration and development ideas; II - integrating a global perspective when setting objectives for exploration planning; III - practical issues is setting exploration objectives; IV - portfolio analysis of exploration prospect of ideas; V - the effective presentation of exploration prospects; V I - the future of information management; VII - assessing exploration assets; and V III - environmental and regulatory considerations when planning an exploratory well. Individual articles indexed/abstracted separately include: articles I, II, III, VII, and V III

The Atomic Papers: A citizen's guide to selected books and articles on the bomb, the arms race, nuclear power, the peace movement, and related issues

International Nuclear Information System (INIS)

Burns, G.

1984-01-01

The Atomic Papers annotates over 800 books published since 1945 and approximately 300 periodical articles since 1980 on every facet of the nuclear dilemma: the development and effects of the bomb, the arms race, nuclear proliferation, and the peace movement. Work on both sides of the nuclear power controversy also receives substantial attention. All references are to English-language material, and nearly half are to work published since 1980. The concluding chapter, ''The Art of Fission,'' describes over one hundred novels and stories with nuclear themes published since 1945--and, in a few cases, before that date

Evolution of the scientific paper

Energy Technology Data Exchange (ETDEWEB)

Harmon, J.E.

1992-01-01

The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper's development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965- ).

Trends in CT colonography: bibliometric analysis of the 100 most-cited articles.

Science.gov (United States)

Mohammed, Mohammed Fahim; Chahal, Tejbir; Gong, Bo; Bhulani, Nizar; O'Keefe, Michael; O'Connell, Timothy; Nicolaou, Savvas; Khosa, Faisal

2017-12-01

Our purpose was to identify the top 100 cited articles, which focused on CT colonography (CTC). This list could then be analysed to establish trends in CTC research while also identifying common characteristics of highly cited works. Web of Science search was used to create a database of scientific journals using our search terms. A total of 10,597 articles were returned from this search. Articles were included if they focused on diagnostic imaging, imaging technique, cost-effectiveness analysis, clinical use, patient preference or trends in CTC. Articles were ranked by citation count and screened by two attending radiologists. The following information was collected from each article: database citations, citations per year, year published, journal, authors, department affiliation, study type and design, statistical analysis, sample size, modality and topic. Citations for the top 100 articles ranged from 73 to 1179, and citations per year ranged from 4.5 to 84.21. Articles were published across 22 journals, most commonly Radiology (n = 37) and American Journal of Roentgenology (n = 19). Authors contributed from 1 to 20 articles. 19% of first authors were affiliated with a department other than radiology. Of the 100 articles, the most common topics were imaging technique (n = 40), diagnostic utility of imaging (n = 28) and clinical uses (n = 18). Our study provides intellectual milestones in CTC research, reflecting on the characteristics and quality of published literature. This work also provides the most influential references related to CTC and serves as a guide to the features of a citable paper in this field.

Research article

African Journals Online (AJOL)

Nathan

2009-11-16

Nov 16, 2009 ... &Corresponding author: Dr Sani Rachid Department of Surgery, National ... In developed countries, MBC accounts for 1–5.7% of breast .... All the authors have contributed for this paper including collecting and analyzing data.

The top 100 papers in dry eye - A bibliometric analysis.

Science.gov (United States)

Schargus, Marc; Kromer, Robert; Druchkiv, Vasily; Frings, Andreas

2018-01-01

Citation analysis represents one of the best currently available methods for quantifying the impact of articles. Bibliometric studies list the ''best sellers'' in a single field of interest. The purpose of the present study was to identify and analyze the most frequently cited papers in dry eye research that may be of high interest for researchers and clinicians. We reviewed the database of the Institute for Scientific Information to identify articles published from 1900 to September 2016. All dry eye articles published in 59 ophthalmology journals were identified. The top 100 articles were selected for further analysis of authorship, source journal, number of citations, citation rate, geographic origin, article type, and level of evidence. The 100 most-cited articles were published between 1983 and 2011, with most of them in the 2000s. The number of citations per article ranged from 96 to 610, and was greatest for articles published in the 2000s. Each of these articles was published in one of 15 journals. Most articles represented Level-III evidence, followed by Levels II and I. The present study focusing on dry eye research revealed that 55% of the most-cited articles came from the U.S. and 18% from Japan. Diagnostics and therapy were the areas of focus of most of the clinical articles; 13% of the most cited papers were review articles. This analysis provides researchers and clinicians with a detailed overview on the most cited dry eye papers over the past decades. Copyright © 2017 Elsevier Inc. All rights reserved.

Korea's Contribution to Radiological Research Included in Science Citation Index Expanded, 1986-2010

Energy Technology Data Exchange (ETDEWEB)

Ku, You Jin; Yoon, Dae Young; Lim, Kyoung Ja; Baek, Sora; Seo, Young Lan; Yun, Eun Joo; Choi, Chul Soon; Bae, Sang Hoon [Kangdong Sacred Heart Hospital, Hallym University College of Medicine, Seoul (Korea, Republic of); Lee, Hyun; Ju, Young Su [Hallym University Sacred Heart Hospital, Hallym University College of Medicine, Anyang (Korea, Republic of)

2012-09-15

To evaluate scientific papers published by Korean radiologists in the Science Citation Index Expanded (SCIE) radiology journals, between 1986 and 2010. The Institute for Scientific Information Web of Knowledge-Web of Science (SCIE) database was searched for all articles published by Korean radiologists, in SCIE radiology journals, between 1986 and 2010. We performed the analysis by typing 'Korea' and 'radiol' in the address section and selecting the subject area of 'Radiology, Nuclear Medicine, and Medical Imaging' with the use of the general search function of the software. Analyzed parameters included the total number of publications, document types, journals, and institutions. In addition, we analyzed where Korea ranks, compared to other countries, in terms of the number of published articles. All these data were analyzed according to five time periods: 1986-1990, 1991-1995, 1996-2000, 2001-2005, and 2006-2010. Overall, 4974 papers were published by Korean radiologists, in 99 different SCIE journals, between 1986 and 2010, of which 4237 (85.2%) were article-type papers. Of the total 115395 articles, worldwide, published in radiology journals, Korea's share was 3.7%, with an upward trend over time (p < 0.005). The journal with the highest number of articles was the American Journal of Roentgenology (n 565, 13.3%). The institution which produced the highest number of publications was Seoul National University (n = 932, 22.0%). The number of scientific articles published by Korean radiologists in the SCIE radiology journals has increased significantly between 1986 and 2010. Korea was ranked 4th among countries contributing to radiology research during the last 5 years.

Gender analysis of papers published in ACTAS ESPANOLAS DE PSIQUIATRIA (1999-2006).

Science.gov (United States)

Alonso-Arroyo, A; González-Alcaide, G; Bolaños Pizarro, M; Castelló Cogollos, L; Valderrama-Zurián, J C; Aleixandre-Benavent, R

2008-01-01

The governments and organizations responsible for scientific policies try to encourage equality of gender, among their priorities that of obtaining equal participation and full integration of women in all aspects of the scientific profession. The study analyzes the scientific production of women in the areas of Psychiatry by means of the bibliometric study of the papers published in ACTAS ESPANOLAS DE PSIQUIATRIA. A total of 458 papers published from 1999- 2006 period were downloaded from the Science Citation Index-Expanded database, these including original research papers, review articles and clinical cases. A bibliometric study broken down by gender was carried out to determine the existence or inequalities between men and women regarding scientific productivity, type of document, order of author signatures, on the institutional and geographical level. The papers were published by 1,194 different authors. The gender of 977 authors was identified, 587 (60.08%) men and 390 (39.92%) women. The percentage of women authorship has risen from 29.92% in 1999 to 38.86% in 2006. A total of 42.92% of authors having one published article were women, while (those with more than nine articles) only accounted for 33%. Bibliometric studies on scientific activity provide essential information to promote gender equality. An annual increase over 1% in the number of female authors in the journal has been observed, which if it continues will lead to a parity in coming years.

A bibliometric analysis of the 100 most influential papers in burns.

Science.gov (United States)

Joyce, C W; Kelly, J C; Sugrue, C

2014-02-01

The importance of a published paper to a particular area is reflected in the quantity of citations obtained from peers. In burns, it is unknown which papers have been the most influential on this specialty. The purpose of our study was to identify the 100 most cited papers in burns and to analyze their characteristics. Twenty-seven journals were chosen for analysis. These included high impact factor scientific journals and journals dedicated to burns and trauma. Only twelve of these journals contributed to the 100 most cited papers in burns and we analyzed each paper individually looking at its subject matter, authorship, article type, institution, country and year of publication. Our citation analysis revealed an interesting mix of clinical and scientific papers that documents the key landmarks in burn care over the past 66 years. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Communications article

KAUST Repository

Fariborzi, Hossein

2017-07-20

Seamless, covert communications using a communications system integrated or incorporated within an article of clothing is described. In one embodiment, the communications system is integrated or incorporated into a shoe insole and includes a haptic feedback mechanism, a communications module, a flexible pressure sensor, and a battery. The communications module includes a wireless communications module for wireless communications, a wired interface for wired communications, a microcontroller, and a battery charge controller. The flexible pressure sensor can be actuated by an individual\\'s toe, for example, and communication between two communications nodes can be achieved using coded signals sent by individuals using a combination of long and short presses on the pressure sensor. In response to the presses, wireless communications modules can transmit and receive coded signals based on the presses.

75 FR 71427 - Domtar Paper Company, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes...

Science.gov (United States)

2010-11-23

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER11-2020-000] Domtar Paper... proceeding, of Domtar Paper Company, LLC's application for market-based rate authority, with an accompanying... of protests and interventions in lieu of paper, using the FERC Online links at http://www.ferc.gov...

Notice: PSPB articles by authors with retracted articles at PSPB or other journals: Stapel, Smeesters, and Sanna.

Science.gov (United States)

Funder, David

2014-01-01

Numerous articles by the social psychologists Diederick Stapel, Dirk Smeesters, and Lawrence Sanna have been retracted in several different journals. The present notice reports the results of an investigation into papers authored or coauthored by these individuals, and published in Personality and Social Psychology Bulletin, that have not been retracted. The status of these papers range from data confirmed as legitimate by coauthors to, in many cases, being unknown as to their legitimacy. Given the lack of information in the latter cases, there is insufficient basis to recommend retraction at this time. Researchers using the results of these papers in their own work are advised to take the information reported in this notice into account.

The British research evidence for recovery, papers published between 2006 and 2009 (inclusive). Part two: a review of the grey literature including book chapters and policy documents.

Science.gov (United States)

Stickley, T; Wright, N

2011-05-01

This paper is the second in a series of two which reviews the current UK evidence base for recovery in mental health. As outlined in the previous paper, over the last 4 years a vast amount has written about recovery in mental health (approximately 60% of all articles). Whereas the first review focused on the peer-reviewed evidence; this paper specifically focuses on the grey/non-peer-reviewed literature. In total, our search strategy yielded the following: 3 books, a further 11 book chapters, 12 papers, 6 policy documents and 3 publications from voluntary sector organizations. Each group of publications was analysed for content, and they are discursively presented by publication group. The findings are then presented as themes in the discussion section. The themes are: social, historical and political critique; philosophy of hope for the individual; individual identity and narrative; models and guidance for mental health practice. We conclude that there is a need for both empirical research into recovery and a clearer theoretical exposition of the concept. © 2010 Blackwell Publishing.

Automatic sentence extraction for the detection of scientific paper relations

Science.gov (United States)

Sibaroni, Y.; Prasetiyowati, S. S.; Miftachudin, M.

2018-03-01

The relations between scientific papers are very useful for researchers to see the interconnection between scientific papers quickly. By observing the inter-article relationships, researchers can identify, among others, the weaknesses of existing research, performance improvements achieved to date, and tools or data typically used in research in specific fields. So far, methods that have been developed to detect paper relations include machine learning and rule-based methods. However, a problem still arises in the process of sentence extraction from scientific paper documents, which is still done manually. This manual process causes the detection of scientific paper relations longer and inefficient. To overcome this problem, this study performs an automatic sentences extraction while the paper relations are identified based on the citation sentence. The performance of the built system is then compared with that of the manual extraction system. The analysis results suggested that the automatic sentence extraction indicates a very high level of performance in the detection of paper relations, which is close to that of manual sentence extraction.

Data on the descriptive overview and the quality assessment details of 12 qualitative research papers

OpenAIRE

Barnabishvili, Maia; Ulrichs, Timo; Waldherr, Ruth

2016-01-01

This data article presents the supplementary material for the review paper “Role of acceptability barriers in delayed diagnosis of Tuberculosis: Literature review from high burden countries” (Barnabishvili et al., in press) [1]. General overview of 12 qualitative papers, including the details about authors, years of publication, data source locations, study objectives, overview of methods, study population characteristics, as well as the details of intervention and the outcome parameters of t...

Guidelines for Composing and Assessing a Paper on Treatment of Pain.

Science.gov (United States)

Bogduk, Nikolai; Kennedy, David J; Vorobeychik, Yakov; Engel, Andrew

2017-11-01

Authors, readers, and editors share a common focus. Authors want to publish their work. Readers want to see high-quality, new information. Referees and editors serve to ensure that authors provide valid conclusions based on the quality of information that readers want.Common to each of these roles are instructions to authors. However, these are typically written in an uninspiring, legalistic style, as if they are a set of rules that authors must obey if they expect to get published. This renders the instructions boring and oppressive, if not forbidding. Yet they need not be so, if they are set in context.Instructions to authors can be cast in a way as to reflect common purpose. They can remind authors what perceptive readers want to see in a paper and, thereby, prompt authors to include all necessary information. If cast in this way, instructions to authors are not a set of rules by which to satisfy publishers; they become guidelines for the etiquette of communication between authors and their readers.Against this background, the present article has been composed to serve several purposes. Foremost, it amplifies instructions to authors beyond the conventional technicalities such as headings, layout, font size, and line spacing. It prescribes the type of information that should be communicated and explains the reasons for those recommendations. Doing so not only informs authors about what to write, but also informs readers and referees about what to look for in a good paper. Secondarily, the article publicizes examples of errors and deficiencies of manuscripts submitted to the Journal in the past that have delayed their acceptance and publication, which could have been avoided had the forthcoming recommendations been followed. The recommendations also reprise the elements taught in courses conducted by the Spine Intervention Society in their extended program on evidence-based medicine. Doing so underscores that instructions for authors are not a procedural

Impact of published articles on trade liberalization from 1980-2015 ...

African Journals Online (AJOL)

In this research, the viable impact of scholarly research on trade liberalisation by a bibliometric approach from 1980-2015 is examined. The paper analysed 886 academic articles extracted from the ISI Web of Science Core Collection database. Trade liberalisation research is notably interdisciplinary, with articles principally ...

Continental Drift in the Treatment of Dominant Firms: Article 102 TFEU in Contrast to § 2 Sherman Act

NARCIS (Netherlands)

Larouche, P.; Schinkel, M.P.

2013-01-01

In this paper we compare the concepts of monopolization and abuse of dominance as in §2 of the Sherman Act and Article 102 of the TFEU, respectively. After identifying a number of distinctive features in wording and interpretation - including the special responsibility of the dominant firm,

Review of orthognathic surgery and related papers published in the British Journal of Oral and Maxillofacial Surgery 2011-2012.

Science.gov (United States)

Goodson, Alexander M C; Payne, Karl F B; Tahim, Arpan; Colbert, Serryth; Brennan, Peter A

2015-04-01

This review summarises all orthognathic and related papers published between January 2011 and December 2012 in the British Journal of Oral and Maxillofacial Surgery (BJOMS). A total of 36 articles were published, a high proportion of which (78%) were full-length papers. The remainder consisted of short communications and technical notes. The topics included operative planning and postoperative outcomes, and there was a strong focus on distraction osteogenesis. There were fewer orthognathic articles published in BJOMS than articles on other subspecialties such as trauma or head and neck oncology. Only 8 (29%) of the full-length articles were prospective studies or randomised trials, which highlights a need for well-designed clinical studies in orthognathic research. Copyright © 2013 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Scope and policy of E-JAM academic papers

International Nuclear Information System (INIS)

Kojima, Fumio

2009-01-01

This article is concerned with E-JAM academic papers. The academic journal focuses on structural safety evaluation practices in the nuclear power industries. In this article, we introduce the scope of the journal as well as the journal policies. (author)

Austria; 2013 Article IV Consultation

OpenAIRE

International Monetary Fund

2013-01-01

This paper presents details of Austria’s 2013 Article IV Consultation. Austria has been growing economically but is facing challenges in the financial sector. Full implementation of medium-term fiscal adjustment plans require specifying several measures and plans that need gradual strengthening to take expected further bank restructuring cost into account. It suggests that strong early bank intervention and resolution tools, a better designed deposit insurance system, and a bank-financed reso...

Curated Collection for Educators: Five Key Papers about the Flipped Classroom Methodology.

Science.gov (United States)

King, Andrew; Boysen-Osborn, Megan; Cooney, Robert; Mitzman, Jennifer; Misra, Asit; Williams, Jennifer; Dulani, Tina; Gottlieb, Michael

2017-10-25

The flipped classroom (FC) pedagogy is becoming increasingly popular in medical education due to its appeal to the millennial learner and potential benefits in knowledge acquisition. Despite its popularity and effectiveness, the FC educational method is not without challenges. In this article, we identify and summarize several key papers relevant to medical educators interested in exploring the FC teaching methodology. The authors identified an extensive list of papers relevant to FC pedagogy via online discussions within the Academic Life in Emergency Medicine (ALiEM) Faculty Incubator. This list was augmented by an open call on Twitter (utilizing the #meded, #FOAMed, and #flippedclassroom hashtags) yielding a list of 33 papers. We then conducted a three-round modified Delphi process within the authorship group, which included both junior and senior clinician educators, to identify the most impactful papers for educators interested in FC pedagogy. The three-round modified Delphi process ranked all of the selected papers and selected the five most highly-rated papers for inclusion. The authorship group reviewed and summarized these papers with specific consideration given to their value to junior faculty educators and faculty developers interested in the flipped classroom approach. The list of papers featured in this article serves as a key reading list for junior clinician educators and faculty developers interested in the flipped classroom technique. The associated commentaries contextualize the importance of these papers for medical educators aiming to optimize their understanding and implementation of the flipped classroom methodology in their teaching and through faculty development.

Writing and Publishing Scientific Papers in the Field of Management

Directory of Open Access Journals (Sweden)

Vasja Roblek

2013-01-01

Full Text Available Science is one of the most important human activities and is crucial for the development of society. Scientific research results should be presented to the public, which can be done through various publications. The article was written for graduate students and beginner researchers and presents steps for writing scientific papers. A well-written scientific paper consists of essential parts, i.e. appropriate structure, which in presented in this paper. The authors of this article present tips and useful advice when writing and publishing scientific papers in the field of management.

Cited Brazilian papers in general surgery between 1970 and 2009

Directory of Open Access Journals (Sweden)

Flavio L. Heldwein

2010-01-01

Full Text Available OBJECTIVES: To identify the most cited articles in general surgery published by Brazilian authors. INTRODUCTION: There are several ways for the international community to recognize the quality of a scientific article. Although controversial, the most widely used and reliable methodology to identify the importance of an article is citation analysis. METHODS: A search using the Institute for Scientific Information citation database (Science Citation Index Expanded was performed to identify highly cited Brazilian papers published in twenty-six highly cited general surgery journals, selected based on their elevated impact factors, from 1970 to 2009. Further analysis was done on the 65 most-cited papers. RESULTS: We identified 1,713 Brazilian articles, from which nine papers emerged as classics (more than 100 citations received. For the Brazilian contributions, a total increase of about 21-fold was evident between 1970 and 2009. Although several topics were covered, articles covering trauma, oncology and organ transplantation were the most cited. The majority of classic studies were done with international cooperation. CONCLUSIONS: This study identified the most influential Brazilian articles published in internationally renowned general surgery journals.

Selected papers, with commentary, of Tony Hilton Royle Skyrme

CERN Document Server

Skyrme, T H R

1994-01-01

The most important papers of Tony Hilton Royle Skyrme are collected in this volume which also includes commentaries by G Brown and other articles relating to the life and work of Tony Skryme, R Dalitz, E Witten and others. Skyrme's work was brilliant, profound and surprisingly useful. He provided an original solution to the problem of constructing fermions from bosons, formulating the topological soliton model of the nucleon. His two-parameter model of effective interactions in nuclei has yielded a remarkably accurate description of nuclear structure. His a-particle model of nuclei gave deep i

Self-archiving of Our Own Articles: Romeo and Juliet Notes

Directory of Open Access Journals (Sweden)

Amir Reza Kachooei

2015-09-01

Full Text Available ree access to the articles is becoming more popular since it gives thousands of researchers access to millions of publications resulting in higher visibility and receiving much more citations, which often times might be the ultimate goal. For this reason, authors may seek a way to make the papers easily accessible to other researchers via uploading the full text to their personal website and/or scientific social networks such as the ResearchGate, which is legally considered a personal website of the users (1. This looks simple and naïve, but on the other hand it seems to be in contrast to the policy of the subscription-based journals, which may violate the granted signed copyright to the publisher (2. There are two concerns with letting others access the article for free: 1 A friend or a colleague may request the paper and the author is going to send the article via email. 2 The author uploads the full text on to a personal or scientific website available to every researcher. Regarding the first issue, do not hesitate to do so. It is accepted ethically and legally to send a requested paper to a researcher who is asking for it. As far as there is no commercial advantage by having the paper, any scientific use is encouraged and permitted. The second concern is currently a hot topic. On the bright side, providing free access to every paper might endanger the monetary benefits of the publishers. However, on the flip side of the coin, publishers are also gaining greater income, although indirect but significant via receiving more visibility and subsequent citations to the exposed papers. Having said that, to create a balance between the appeals for free access while avoiding the breach to the copyright system, publishers have come up with new policies in this regards, which is different from the Copyright without violating the subscription-based journals. The publisher copyright policies for self-archiving is called SHERPA/RoMEO. Within this, the

Self-archiving of Our Own Articles: Romeo and Juliet Notes

Directory of Open Access Journals (Sweden)

Amir Reza Kachooei

2015-10-01

Full Text Available ree access to the articles is becoming more popular since it gives thousands of researchers access to millions of publications resulting in higher visibility and receiving much more citations, which often times might be the ultimate goal. For this reason, authors may seek a way to make the papers easily accessible to other researchers via uploading the full text to their personal website and/or scientific social networks such as the ResearchGate, which is legally considered a personal website of the users (1. This looks simple and naïve, but on the other hand it seems to be in contrast to the policy of the subscription-based journals, which may violate the granted signed copyright to the publisher (2. There are two concerns with letting others access the article for free: 1 A friend or a colleague may request the paper and the author is going to send the article via email. 2 The author uploads the full text on to a personal or scientific website available to every researcher. Regarding the first issue, do not hesitate to do so. It is accepted ethically and legally to send a requested paper to a researcher who is asking for it. As far as there is no commercial advantage by having the paper, any scientific use is encouraged and permitted. The second concern is currently a hot topic. On the bright side, providing free access to every paper might endanger the monetary benefits of the publishers. However, on the flip side of the coin, publishers are also gaining greater income, although indirect but significant via receiving more visibility and subsequent citations to the exposed papers. Having said that, to create a balance between the appeals for free access while avoiding the breach to the copyright system, publishers have come up with new policies in this regards, which is different from the Copyright without violating the subscription-based journals. The publisher copyright policies for self-archiving is called SHERPA/RoMEO. Within this, the

Enriching PubMed Related Article Search with Sentence Level Co-citations

Science.gov (United States)

Tran, Nam; Alves, Pedro; Ma, Shuangge

2009-01-01

PubMed related article links identify closely related articles and enhance our ability to navigate the biomedical literature. They are derived by calculating the word similarity between two articles, relating articles with overlapping word content. In this paper, we propose to enrich PubMed with a new type of related article link based on citations within a single sentence (i.e. sentence level co-citations or SLCs). Using different similarity metrics, we demonstrated that articles linked by SLCs are highly related. We also showed that only half of SLCs are found among PubMed related article links. Additionally, we discuss how the citing sentence of an SLC explains the connection between two articles. PMID:20351935

Eight questions to ask before writing an article.

Science.gov (United States)

Albert, Tim

2017-06-02

Health professionals often have to write articles for publication in academic journals. Many of them find this difficult and suffer from one or more variations of writer's block. A good way of avoiding these setbacks is to prepare thoroughly for the writing project, and this article proposes eight different questions writers can ask before they start. The first is whether they are in a good position to complete the task, and if not whether they should try to negotiate their way out of the project. If they commit to going ahead, writers should work out where they will find the necessary time, and set deadlines for ensuring that they do. They should also decide on their co-authors, because getting them involved early should make the rewriting more straightforward as well as reducing the danger of ghost authors emerging once the work has been done. Writers should put their research away and reflect on the most appropriate message - a simple sentence that sums up the main implication of the paper. Armed with this message, they can identify a suitable journal for publication - and thereafter can use articles in this journal to guide them on matters of substance and style. If the article is published in that target journal authors can consider that they have written a successful paper.

Microsurgery: the top 50 classic papers in plastic surgery: a citation analysis.

Science.gov (United States)

Joyce, Cormac Weekes; Carroll, Sean Michael

2014-03-01

The number of citations that a published article has received reflects the importance of the paper in the particular area of practice. In microsurgery, thus far, which journal articles are cited most frequently is unknown. The purpose of this study was to identify and analyze the characteristics of the top 50 papers in the field of microsurgery in the plastic surgery literature. The 50 most cited papers published in high impact plastic surgery and microsurgery journals were identified. The articles were ranked in the order of the number of citations received. These 50 classic papers were analyzed for article type, journal distribution, and geographic and institutional origin. Six international journals contributed to the top 50 papers in microsurgery. The most cited paper reported on the early use of the vascularized bone graft and was cited 116 times. The top 50 papers originated from just 10 countries with the United States producing the most. The Preston and Northcote Community Hospital, Melbourne published 5 papers and this was the most productive institution in the top 50. These papers represent many important milestones in the relatively short history of microsurgery. Furthermore, our citation analysis provides useful information to budding authors as to what makes a paper attain a "classic" status.

A bibliometric analysis of the 100 most influential papers on COPD

Directory of Open Access Journals (Sweden)

Gu WC

2015-03-01

Full Text Available Wenchao Gu,1 Yaping Yuan,1  Hua Yang,1 Guangsheng Qi,1 Xiaoyan Jin,2 Jin Yan2 1Department of Respiratory Medicine, People’s Hospital of Shanghai, Pudong New Area, 2Department of Respiratory Medicine, Tongren Hospital, Shanghai, People’s Republic of China Objective: We aimed to identify the 100 top-cited articles published on chronic obstructive pulmonary disease (COPD and to analyze their characteristics so as to provide information on the achievement and development in COPD research over the past decades. Methods and materials: A comprehensive list of citation classics in COPD was generated by searching the Science Citation Index expanded database, using the keywords “COPD” or “chronic obstructive pulmonary disease” or “chronic obstructive pulmonary diseases”. The 100 top-cited research papers were retrieved by reading the abstract or full text if needed. All eligible articles were read for basic information, including country of origin, organizations, article type, journals, research field, and authors.Results: The 100 top-cited articles on COPD were published between 1966 and 2010. The number of citations ranged from 254 to 2,164, with a mean of 450 citations for each article. These citation classics were from 32 countries, with 38 from the United States. The Imperial College London led the list of classics, with 16 papers. The 100 top-cited articles were distributed in 18 journals, with the American Journal of Respiratory, Critical Care Medicine, and Journal of the American Medical Association topping the list. Among the various fields, both respiratory system (63% and general internal medicine (63% were the most common fields of study for the 100 articles. Conclusion: Our bibliometric analysis provides a historical perspective on the progress of scientific research on COPD. Articles originating from the United States and published in high-impact specialized respiratory journals are most likely to be cited in the

Research Article Special Issue

African Journals Online (AJOL)

pc

24 Ноя 2017 ... article includes the study of main characteristics of the concept "Моң" .... boundaries, is used to determine the media picture of the world of the speakers of Tatar ..... to the movies that often colorful, musical and dramatic televised) were ... aspects of intercultural communication theory, cultural studies, and ...

How to write an original article.

Science.gov (United States)

Mateu Arrom, L; Huguet, J; Errando, C; Breda, A; Palou, J

2018-05-17

A correctly drafted original article gives information on what was done, why it was done, how it was done, the result of what was done, and the significance of what was done. Many articles fail to report their results effectively. To describe the characteristics of an original article and to give practical recommendations to prevent the most common errors in our environment. We performed a systematic search of the terms "how to write a scientific article", "structure of the original article" and "publishing an article" in the databases PubMed and SCOPUS. We analysed the structure of an original article and the characteristics of its parts and prepared advice on the publication of an article. The journal's guidelines for authors should be read. It is usual for the original article to follow the IMRAD structure: Introduction, Methods, Results and Discussion. The introduction states briefly why the study was performed. The methods' section should give a detailed explanation of how the study was performed. The results should be clearly presented, with the help of tables, without repeating information. The discussion explains the relevance of the results and contrasts them with those of other authors. Any limitations and a conclusion supported by the results must be included. Writing an original article correctly requires practice and it must be supported by a good research work in order to be published. Copyright © 2018 AEU. Publicado por Elsevier España, S.L.U. All rights reserved.

The Top-100 Most-Cited Articles on Meningioma.

Science.gov (United States)

Almutairi, Othman; Albakr, Abdulrahman; Al-Habib, Amro; Ajlan, Abdulrazag

2017-11-01

There is an abundance of articles published on meningioma. To identify the 100 most-cited articles on meningioma and to perform a bibliometric analysis. In November 2016, we performed a title-specific search of the Scopus database using "meningioma" as our search query term without publication date restrictions. The top 100 most cited articles were obtained and reviewed. The top 100 most cited articles received a mean 198 citations per paper. Publication dates ranged from 1953 to 2013; most articles were published between 1994 and 2003, with 50 articles published during that period. NEUROSURGERY published the greatest number of top cited articles (22 of 100). The most frequent study categories were laboratorial studies (31 of 100) and natural history studies (28 of 100). Nonoperative management studies were twice as common as operative management studies in the top-cited articles. Neurosurgery as a specialty contributed to 50% of the top 100 list. The most contributing institute was the Mayo Clinic (11%); the majority of the top cited articles originated in the United States (53%). We identified the top 100 most-cited articles on meningioma that may be considered significant and impactful works, as well as the most noteworthy. In addition, we recognized the historical development and advances in meningioma research and the important contributions of various authors, specialty fields, and countries. A large proportion of the most cited articles were written by authors other than neurosurgeons, and many of these articles were published in non-neurosurgery journals. Copyright © 2017 Elsevier Inc. All rights reserved.

7 CFR 319.37-12 - Prohibited articles accompanying restricted articles.

Science.gov (United States)

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Prohibited articles accompanying restricted articles... Stock, Plants, Roots, Bulbs, Seeds, and Other Plant Products 1,2 § 319.37-12 Prohibited articles accompanying restricted articles. A restricted article for importation into the United States shall not be...

Biaxially textured articles formed by powder metallurgy

Science.gov (United States)

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-07-29

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100} orientation texture; and further having a Curie temperature less than that of pure Ni.

Biaxially textured articles formed by power metallurgy

Science.gov (United States)

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-08-26

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100} orientation texture; and further having a Curie temperature less than that of pure Ni.

Biaxially textured articles formed by powder metallurgy

Science.gov (United States)

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-08-05

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of ternary mixtures consisting of: Ni powder, Cu powder, and Al powder, Ni powder, Cr powder, and Al powder; Ni powder, W powder and Al powder; Ni powder, V powder, and Al powder; Ni powder, Mo powder, and Al powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100} orientation texture; and further having a Curie temperature less than that of pure Ni.

Construction-Paper Puzzle Masterpieces

Science.gov (United States)

Vance, Shelly

2010-01-01

Creating an appreciation of art history in her junior-high students has always been one of the author's greatest challenges as an art teacher. In this article, the author describes how her eighth-grade students re-created a famous work of art--piece by piece, like a puzzle or a stained-glass window--out of construction paper. (Contains 1 resource.)

Distribution of Articles in Written Composition among Malaysian ESL Learners

Science.gov (United States)

Rahim, Mia Emily Abdul; Rahim, Emma Marini Abdul; Ning, Chia Han

2013-01-01

The study aimed to investigate the distribution patterns of the English grammar articles (a, an, and the) as well as the distributions of their colligation patterns in written compositions of English among Malaysian ESL learners. This paper reports the results of a corpus-based study on articles used by these learners. The method used in this…

Introduction to the Articles on Innovative Applications of Artificial Intelligence

OpenAIRE

Rychtyckyj, Nestor; Shapiro, Daniel

2011-01-01

This issue of AI Magazine provides extended versions of several papers that were recently presented at the Innovative Applications of Artificial Intelligence Conference (IAAI-2010). We present three articles reflecting deployed applications of AI, one describing a unique, emerging application, plus an article based on the invited talk by Jay M. Tenenbaum, who was the 2010 Engelmore Award recipient.

The "Dos and Don'ts" of Writing a Journal Article

Science.gov (United States)

Kekale, Tauno; de Weerd-Nederhof, Petra; Cervai, Sara; Borelli, Massimo

2009-01-01

Purpose: During work as reviewers and editors of journals authors are often faced the same types of problems in many articles. The purpose of this piece is to give some guidelines on typical problems that lead to rejection, and how to avoid these. Design/methodology/approach: The paper discusses journal article design and offers some methodology…

Tweeting News Articles

Directory of Open Access Journals (Sweden)

Marco Toledo Bastos

2013-09-01

Full Text Available In this article we investigate the impact of social media readership to the editorial profile of newspapers. We analyze tweets containing links to news articles from eight of the largest national newspapers in the United States, United Kingdom, Spain, Brazil, and Germany. The data collection follows the first two weeks of October 2012 and includes 2,842,699 tweets with links to news articles. Twitter-shortened links were resolved using a three-pass routine and assigned to 1 of the 21 newspaper sections. We found the concentration of links to news articles posted by top users to be lower than reported in the literature and the strategy of relaying headlines on Twitter via automatic news aggregators (feeds to be inefficient. The results of this investigation show which sections of a newspaper are the most and least read by readers in different parts of the world, with German readers placing greater emphasis on Politics and Economy; Brazilians on Sports and Arts; Spaniards on Local and National news; Britons and Americans on Opinion and World news. We also found that German and Spanish readers are more likely to read multiple national newspapers, while British readers more often resort to foreign sources of news. The results confirm that feedback to news items from a large user base is pivotal for the replication of content and that newspapers and news items can be clustered according to the editorial profile and principles of newsworthiness inherited from legacy media. The results of this investigation shed light onto the networked architecture of journalism that increasingly depends on readership agency.

Consumable core for manufacture of composite articles and related method

Science.gov (United States)

Taxacher, Glenn Curtis; de Diego, Peter; Gray, Paul Edward; Monaghan, Philip Harold

2017-09-05

Systems, methods and devices adapted to ease manufacture of composite articles (e.g., ceramic composite articles), particularly composite articles which include a hollow feature are disclosed. In one embodiment, a system includes: a consumable core formed to be disposed within an inner portion of a composite precursor, the consumable core adapted to convert into an infiltrant during a manufacturing process and infiltrate the composite precursor.

Development and Psychometric Evaluation of Scales: A Survey of Published Articles

Directory of Open Access Journals (Sweden)

Foroozan Atashzadeh-Shoorideh

2016-01-01

Full Text Available Background and purpose: Using valid and reliable instruments is an important way for collecting data in qualitative researches. This paper is a report of a study conducted to examine the extent of psychometric properties of the scales in research papers published in Journal of Advanced Nursing.Methods: In this study, the Journal of Advanced Nursing was chosen for systematic review. All articles which were published during 2007-2009 in this journal were collected and articles related to instrument development were selected. Each article was completely reviewed to identify the methods of instrument validation and reliability.Results: From 980 articles published in Journal of Advanced Nursing during 2007-2009, 41 (4.18% articles were about research methodology. In these, 12 articles (29.27% were related to developing an instrument. In this study, review of 12 articles that published in Journal of Advanced Nursing, 2007-2009, showed that some of the articles did not measure psychometric properties properly, thus some of the developed scales need to measure other types of necessary validity. In addition, reliability testing needs to be performed on each instrument used in a study before other statistical analysis are performed. From 12 articles, all of the articles measured and reported Cronbach’s alpha, but four of them did not measure test-retest.Conclusions: Although researchers put a great emphasis on methodology and statistical analysis, they pay less attention to the psychometric properties of their new instruments. The authors of this article hope to draw the attention of researcher to the importance of measuring psychometric properties of new instruments.Keywords: PSYCHOMETRIC, SCALES, CRITICAL REVIEW

Expressing Certainty in Discussion Sections of Qualitative and Quantitative Research Articles

Science.gov (United States)

Dobakhti, Leila

2013-01-01

This paper investigates how boosters are used by qualitative and quantitative research article writers to express certainty. Boosters are words such as "definitely," "sure," "demonstrate" which signal writers' assurance in what they say. Drawing on a corpus of 200 research articles in Applied Linguistics, this study…

Analysis of scientific papers in the field of radiology and medical imaging included in Science Citation Index expanded and published by Turkish authors.

Science.gov (United States)

Akpinar, Erhan; Karçaaltincaba, Muşturay

2010-09-01

We aimed to analyze scientific papers published by Turkish authors in "radiology, nuclear medicine and medical imaging" journals included in the Science Citation Index Expanded and compared the number of published scientific papers from Turkey and other countries. We retrospectively searched all papers published by Turkish authors between 1945 and 2008 by using Web of Science software. We performed the analysis by typing "Turkey" in the address section and all radiology and medical imaging journals in the source title section using the general search function of the software. We further analyzed these results by using "analyze" function of the software according to the number of publications per year, journals, institution and type of papers. We also calculated total number of citations to published scientific papers using citation report function. We analyzed the rank of Turkey among other countries in terms of the number of published papers. Overall, 4,532 papers were published between 1945 and 2008. The first paper was published in 1976. Number of publications increased dramatically from 1976 (n = 1) to 2008 (n = 383). The top 5 journals publishing papers from Turkish authors were European Journal of Nuclear Medicine and Molecular Imaging (n = 328), Clinical Nuclear Medicine (n = 296), European Journal of Radiology (n = 289), European Radiology (n = 207) and Journal of Clinical Ultrasound (n = 186). All published papers received 18,419 citations and citation to paper ratio was 4.06. The rank of Turkey among other countries in terms of published papers improved during the last 25 years. Number of papers from Turkey published in radiology and medical imaging journals has increased at the start of the new millennium. Currently, Turkey is among the top 12 countries when the number of scientific papers published in radiology journals is taken into consideration.

An Overview on Evaluating and Predicting Scholarly Article Impact

Directory of Open Access Journals (Sweden)

Xiaomei Bai

2017-06-01

Full Text Available Scholarly article impact reflects the significance of academic output recognised by academic peers, and it often plays a crucial role in assessing the scientific achievements of researchers, teams, institutions and countries. It is also used for addressing various needs in the academic and scientific arena, such as recruitment decisions, promotions, and funding allocations. This article provides a comprehensive review of recent progresses related to article impact assessment and prediction. The review starts by sharing some insight into the article impact research and outlines current research status. Some core methods and recent progress are presented to outline how article impact metrics and prediction have evolved to consider integrating multiple networks. Key techniques, including statistical analysis, machine learning, data mining and network science, are discussed. In particular, we highlight important applications of each technique in article impact research. Subsequently, we discuss the open issues and challenges of article impact research. At the same time, this review points out some important research directions, including article impact evaluation by considering Conflict of Interest, time and location information, various distributions of scholarly entities, and rising stars.

A3 Subscale Diffuser Test Article Design

Science.gov (United States)

Saunders, G. P.

2009-01-01

This paper gives a detailed description of the design of the A3 Subscale Diffuser Test (SDT) Article Design. The subscale diffuser is a geometrically accurate scale model of the A3 altitude rocket facility. It was designed and built to support the SDT risk mitigation project located at the E3 facility at Stennis Space Center, MS (SSC) supporting the design and construction of the A3 facility at SSC. The subscale test article is outfitted with a large array of instrumentation to support the design verification of the A3 facility. The mechanical design of the subscale diffuser and test instrumentation are described here

[Analysis of highly cited papers related to malaria in Chinese journals from 2006 to 2013].

Science.gov (United States)

Yao, Deng; Jin-Yu, Mo; Jian, Li

2016-01-25

To analyze the highly cited malaria papers published in Chinese journals from 2006 to 2013, so as to provide the evidence for formulating the plan of selecting topics to the journal editors. The published articles related to malaria included in CNKI and Wanfang medical network from 2006 to 2013 were collected, and the highly cited papers were selected according to the citation frequency calculated by Price's formula. Then the characteristics of the highly cited papers were analyzed. From 2006 to 2013, a total of 1 976 published papers related to malaria were searched in Chinese journals and 98 papers of them were selected as highly cited papers. In the highly cited papers, 18 papers were published in China Tropical Medicine , and 16 and 15 papers were published in Chinese Journal of Parasitology and Parasitic Diseases and Chinese Journal of Schistosomiasis Control , respectively; and original articles accounted for 42.86%; the first authors of these papers were from 44 institutions, and 40.91% of them were from centers for disease control and prevention (CDCs); a percentage of 22.45% of the highly cited papers received fund programs, and most of them were national or provincial funds. The research hotspots were focused on the epidemiology and control, and epidemic situation of malaria. The highly cited papers related to malaria are mainly from CDCs and research institutions, and the related journals could use this information to chose topics and solicit contributions to improve their influence.

Definite Article Usage across Varieties of English

Science.gov (United States)

Wahid, Ridwan

2013-01-01

This paper seeks to explore the extent of definite article usage variation in several varieties of English based on a classification of its usage types. An annotation scheme based on Hawkins and Prince was developed for this purpose. Using matching corpus data representing Inner Circle varieties and Outer Circle varieties, analysis was made on…

Newspaper Clippings and Articles (Weather-related)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Weather-related newspaper articles and photos, almost exclusively from Baltimore, MD and nearby areas. Includes storm damage, rainfall reports, and weather's affect...

Wood and Paper Manufacturing Sectors

Science.gov (United States)

Find EPA regulatory information for the wood product and paper manufacturing sectors, including paper, pulp and lumber. Information includes NESHAPs and effluent guidelines for pulp and paper rulemaking, and compliance guidelines

Feature Article

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education. Feature Article. Articles in Resonance – Journal of Science Education. Volume 1 Issue 1 January 1996 pp 80-85 Feature Article. What's New in Computers Windows 95 · Vijnan Shastri · More Details Fulltext PDF. Volume 1 Issue 1 January 1996 pp 86-89 Feature ...

Collected Papers of Srinivasa Ramanujan

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 18; Issue 9. Collected Papers of Srinivasa Ramanujan. J E Littlewood. Classics Volume 18 Issue 9 September 2013 pp 859-865. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/018/09/0859-0865 ...

What can article-level metrics do for you?

Science.gov (United States)

Fenner, Martin

2013-10-01

Article-level metrics (ALMs) provide a wide range of metrics about the uptake of an individual journal article by the scientific community after publication. They include citations, usage statistics, discussions in online comments and social media, social bookmarking, and recommendations. In this essay, we describe why article-level metrics are an important extension of traditional citation-based journal metrics and provide a number of example from ALM data collected for PLOS Biology.

If the results of an article are noteworthy, read the entire article; do not rely on the abstract alone.

Science.gov (United States)

Dal-Ré, R; Castell, M V; García-Puig, J

2015-11-01

Clinicians typically update their knowledge by reading articles on the Internet. Easy access to the articles' abstracts and a lack of time to access other information sources creates a risk that therapeutic or diagnostic decisions will be made after reading just the abstracts. Occasionally, however, the abstracts of articles from clinical trials that have not obtained statistically significant differences in the primary study endpoint have reported other positive results, for example, of a secondary endpoint or a subgroup analysis. The article, however, correctly reports all results, including those of the primary endpoint. In the abstract, the safety information of the experimental treatment is usually deficient. The whole article should be read if a clinical decision is to be made. Copyright © 2015 Elsevier España, S.L.U. y Sociedad Española de Medicina Interna (SEMI). All rights reserved.

Dengue vaccine: WHO position paper, July 2016 - recommendations.

Science.gov (United States)

World Health Organization

2017-03-01

This article presents the World Health Organization's (WHO) recommendations on the use of dengue vaccine excerpted from the WHO position paper on dengue vaccine published in the Weekly epidemiological Record in July 2016 (Dengue vaccine: WHO position paper, 2016) [1]. The current document is the first WHO position paper on dengue vaccination and focuses primarily on the available evidence concerning the only dengue vaccine to have been registered by National Regulatory Authorities. The position paper gives consideration to the epidemiological features of the disease and assesses the potential use of the vaccine for public health benefits. Footnotes to this paper provide a number of core references including references to grading tables that assess the quality of the scientific evidence, and to the evidence-to-recommendation table. In accordance with its mandate to provide guidance to Member States on health policy matters, WHO issues a series of regularly updated position papers on vaccines and combinations of vaccines against diseases that have an international public health impact. These papers are concerned primarily with the use of vaccines in large-scale immunization programmes; they summarize essential background information on diseases and vaccines, and conclude with WHO's current position on the use of vaccines in the global context. This paper reflects the recommendations of the WHO's Strategic Advisory Group of Experts (SAGE) on immunization. Recommendations on the use of this dengue vaccine were discussed by SAGE in April 2016; evidence presented at that SAGE meeting can be accessed at: http://www.who.int/immunization/sage/previous/en/index.html. Copyright © 2016 Elsevier Ltd. All rights reserved.

Neutron absorbing article and method for manufacture of such article

International Nuclear Information System (INIS)

McMurty, C.H.; Naum, R.G.; Owens, D.P.; Hortman, M.T.

1981-01-01

A neutron absorbing article is described which comprises boron carbide particles and an irreversibly-cured phenol aldehyde condensation polymer cured to a continuous matrix about the boron carbide particles. Such an article may be used in spent fuel storage racks. It can be manufactured by mixing together a curable phenolic resin with boron carbide particles, compacting the mixture to an article of desired shape, curing the resin at an elevated temperature, impregnating the cured article with curable phenolic resin in liquid state, and curing the article again

Nonlinear Analysis and Preliminary Testing Results of a Hybrid Wing Body Center Section Test Article

Science.gov (United States)

Przekop, Adam; Jegley, Dawn C.; Rouse, Marshall; Lovejoy, Andrew E.; Wu, Hsi-Yung T.

2015-01-01

A large test article was recently designed, analyzed, fabricated, and successfully tested up to the representative design ultimate loads to demonstrate that stiffened composite panels with through-the-thickness reinforcement are a viable option for the next generation large transport category aircraft, including non-conventional configurations such as the hybrid wing body. This paper focuses on finite element analysis and test data correlation of the hybrid wing body center section test article under mechanical, pressure and combined load conditions. Good agreement between predictive nonlinear finite element analysis and test data is found. Results indicate that a geometrically nonlinear analysis is needed to accurately capture the behavior of the non-circular pressurized and highly-stressed structure when the design approach permits local buckling.

Do continuing medical education articles foster shared decision making?

Science.gov (United States)

Labrecque, Michel; Lafortune, Valérie; Lajeunesse, Judith; Lambert-Perrault, Anne-Marie; Manrique, Hermes; Blais, Johanne; Légaré, France

2010-01-01

Defined as reviews of clinical aspects of a specific health problem published in peer-reviewed and non-peer-reviewed medical journals, offered without charge, continuing medical education (CME) articles form a key strategy for translating knowledge into practice. This study assessed CME articles for mention of evidence-based information on benefits and harms of available treatment and/or preventive options that are deemed essential for shared decision making (SDM) to occur in clinical practice. Articles were selected from 5 medical journals that publish CME articles and are provided free of charge to primary-care physicians of the Province of Quebec, Canada. Two individuals independently scored each article with the use of a 10-item checklist based on the International Patient Decision Aid Standards. In case of discrepancy, the item score was established by team consensus. Scores were added to produce a total article score ranging from 0 (no item present) to 10 (all items present). Thirty articles (6 articles per journal) were selected. Total article scores ranged from 1 to 9, with a mean (+/- SD) of 3.1 +/- 2.0 (95% confidence interval 2.8-4.3). Health conditions and treatment options were the items most frequently discussed in the articles; next came treatment benefits. Possible harms, the use of the same denominators for benefits and harms, and methods to facilitate the communication of benefits and harms to patients were almost never described. No significant differences between journals were observed. The CME articles evaluated did not include the evidence-based information necessary to foster SDM in clinical practice. Peer-reviewed and non-peer-reviewed medical journals should require CME articles to include this type of information.

Genealogical Trees of Scientific Papers.

Science.gov (United States)

Waumans, Michaël Charles; Bersini, Hugues

2016-01-01

Many results have been obtained when studying scientific papers citations databases in a network perspective. Articles can be ranked according to their current in-degree and their future popularity or citation counts can even be predicted. The dynamical properties of such networks and the observation of the time evolution of their nodes started more recently. This work adopts an evolutionary perspective and proposes an original algorithm for the construction of genealogical trees of scientific papers on the basis of their citation count evolution in time. The fitness of a paper now amounts to its in-degree growing trend and a "dying" paper will suddenly see this trend declining in time. It will give birth and be taken over by some of its most prevalent citing "offspring". Practically, this might be used to trace the successive published milestones of a research field.

Statistical reviewers improve reporting in biomedical articles: a randomized trial.

Directory of Open Access Journals (Sweden)

Erik Cobo

2007-03-01

Full Text Available Although peer review is widely considered to be the most credible way of selecting manuscripts and improving the quality of accepted papers in scientific journals, there is little evidence to support its use. Our aim was to estimate the effects on manuscript quality of either adding a statistical peer reviewer or suggesting the use of checklists such as CONSORT or STARD to clinical reviewers or both.Interventions were defined as 1 the addition of a statistical reviewer to the clinical peer review process, and 2 suggesting reporting guidelines to reviewers; with "no statistical expert" and "no checklist" as controls. The two interventions were crossed in a 2x2 balanced factorial design including original research articles consecutively selected, between May 2004 and March 2005, by the Medicina Clinica (Barc editorial committee. We randomized manuscripts to minimize differences in terms of baseline quality and type of study (intervention, longitudinal, cross-sectional, others. Sample-size calculations indicated that 100 papers provide an 80% power to test a 55% standardized difference. We specified the main outcome as the increment in quality of papers as measured on the Goodman Scale. Two blinded evaluators rated the quality of manuscripts at initial submission and final post peer review version. Of the 327 manuscripts submitted to the journal, 131 were accepted for further review, and 129 were randomized. Of those, 14 that were lost to follow-up showed no differences in initial quality to the followed-up papers. Hence, 115 were included in the main analysis, with 16 rejected for publication after peer review. 21 (18.3% of the 115 included papers were interventions, 46 (40.0% were longitudinal designs, 28 (24.3% cross-sectional and 20 (17.4% others. The 16 (13.9% rejected papers had a significantly lower initial score on the overall Goodman scale than accepted papers (difference 15.0, 95% CI: 4.6-24.4. The effect of suggesting a guideline to the

Hot-Fire Test Results of an Oxygen/RP-2 Multi-Element Oxidizer-Rich Staged-Combustion Integrated Test Article

Science.gov (United States)

Hulka, J. R.; Protz, C. S.; Garcia, C. P.; Casiano, M. J.; Parton, J. A.

2016-01-01

As part of the Combustion Stability Tool Development project funded by the Air Force Space and Missile Systems Center, the NASA Marshall Space Flight Center was contracted to assemble and hot-fire test a multi-element integrated test article demonstrating combustion characteristics of an oxygen/hydrocarbon propellant oxidizer-rich staged-combustion engine thrust chamber. Such a test article simulates flow through the main injectors of oxygen/kerosene oxidizer-rich staged combustion engines such as the Russian RD-180 or NK-33 engines, or future U.S.-built engine systems such as the Aerojet-Rocketdyne AR-1 engine or the Hydrocarbon Boost program demonstration engine. For the thrust chamber assembly of the test article, several configurations of new main injectors, using relatively conventional gas-centered swirl coaxial injector elements, were designed and fabricated. The design and fabrication of these main injectors are described in a companion paper at this JANNAF meeting. New ablative combustion chambers were fabricated based on hardware previously used at NASA for testing at similar size and pressure. An existing oxygen/RP-1 oxidizer-rich subscale preburner injector from a previous NASA-funded program, along with existing and new inter-connecting hot gas duct hardware, were used to supply the oxidizer-rich combustion products to the oxidizer circuit of the main injector of the thrust chamber. Results from independent hot-fire tests of the preburner injector in a combustion chamber with a sonic throat are described in companion papers at this JANNAF conference. The resulting integrated test article - which includes the preburner, inter-connecting hot gas duct, main injector, and ablative combustion chamber - was assembled at Test Stand 116 at the East Test Area of the NASA Marshall Space Flight Center. The test article was well instrumented with static and dynamic pressure, temperature, and acceleration sensors to allow the collected data to be used for

How to respond to referee comments for scientific articles?

Science.gov (United States)

Kalemci, Mustafa Serdar; Turna, Burak

2013-09-01

Currently, the increasing number of article submissions to scientific journals forces editors to be more selective in their acceptance of papers. Consequently, editors have increased the frequency of their use of scientific referee mechanisms. For many researchers, the publication of a scientific article in a high impact factor journal is a gradual and difficult process. After preparation and submission of a manuscript, one of the most important issue is responding to the comments of referees. However, there is a paucity of published reports in the literature describing how to respond to these comments. The aim of this review is to assist researchers/authors in responding to referee comments as part of the publication process for scientific articles.

A two-dimensional model of the pressing section of a paper machine including dynamic capillary effects

KAUST Repository

Iliev, Oleg P.

2013-05-15

Paper production is a problem with significant importance for society; it is also a challenging topic for scientific investigation. This study is concerned with the simulation of the pressing section of a paper machine. A two-dimensional model is developed to account for the water flow within the pressing zone. A Richards-type equation is used to describe the flow in the unsaturated zone. The dynamic capillary pressure-saturation relation is adopted for the paper production process. The mathematical model accounts for the coexistence of saturated and unsaturated zones in a multilayer computational domain. The discretization is performed by the MPFA-O method. Numerical experiments are carried out for parameters that are typical of the production process. The static and dynamic capillary pressure-saturation relations are tested to evaluate the influence of the dynamic capillary effect. © 2013 Springer Science+Business Media Dordrecht.

Research articles as a didatic tool in undergraduate chemistry teaching

OpenAIRE

Massi, Luciana; Santos, Gelson Ribeiro dos; Ferreira, Jerino Queiroz; Queiroz, Salete Linhares

2009-01-01

Chemistry teachers increasingly use research articles in their undergraduate courses. This trend arises from current pedagogical emphasis on active learning and scientific process. In this paper, we describe some educational experiences on the use of research articles in chemistry higher education. Additionally, we present our own conclusions on the use of such methodology applied to a scientific communication course offered to undergraduate chemistry students at the University of São Paulo, ...

PAPER ON MISCELLANEOUS ISSUES, INCLUDING WORKPLACE PRIVACY

OpenAIRE

Richards, G. W.

2014-01-01

EU directives give member states a certain period – say 2 or 3 years – to implement rules at national level. In fact the DPA 1998 replaces earlier UK legislation, the Data Protection Act 1984, so it does more than simply reproduce the directive. Other examples of subjects covered by directives are redundancy information/ consultation, equal treatment, insolvency protection, pregnancy protection, European and domestic works councils and agency work

The Iranian Academicians' Strategies in Writing English Papers

Directory of Open Access Journals (Sweden)

Marziyeh Nekoueizadeh

2013-05-01

Full Text Available Academicians are identified with their papers and expertise in writing scholarly articles, either for promotion or for satisfying their prestige. Iranian academic members are expected to win a justifiable stance by the quality and quantity of their publications and presentations. Regrettably through pervious studying about second language writing, any studies haven’t been dedicated to the style of writing articles, which are used by academic members. Former studies on second language writing indicate that style in academic paper writing is most likely ignored. The purpose of this study is to explore the role of mind translation strategy among Iranian academic members for expressing their own opinion through writing second language academic papers. The present paper has based its hypothesis on three levels of strategies, effective in writing academic papers, namely: 1-Do Iranian academicians follow specific strategies in writing their academic papers? 2-What role does translation play as a strategy in their writing academic papers? 3-Do they feel a need for a strategy shift in their academic paper writing? Data elicited based on survey and corpora analysis in form of CBDTS- on micro and macro levels, are put into matrices and their analyses are supportive of academicians’ reliance on different types of mental translation use and their shift toward authentic writing after receiving feedback from their reviewers.

Main Propulsion Test Article (MPTA)

Science.gov (United States)

Snoddy, Cynthia

2010-01-01

Scope: The Main Propulsion Test Article integrated the main propulsion subsystem with the clustered Space Shuttle Main Engines, the External Tank and associated GSE. The test program consisted of cryogenic tanking tests and short- and long duration static firings including gimbaling and throttling. The test program was conducted on the S1-C test stand (Position B-2) at the National Space Technology Laboratories (NSTL)/Stennis Space Center. 3 tanking tests and 20 hot fire tests conducted between December 21 1 1977 and December 17, 1980 Configuration: The main propulsion test article consisted of the three space shuttle main engines, flightweight external tank, flightweight aft fuselage, interface section and a boilerplate mid/fwd fuselage truss structure.

How to Verify Plagiarism of the Paper Written in Macedonian and Translated in Foreign Language?

Science.gov (United States)

Spiroski, Mirko

2016-03-15

The aim of this study was to show how to verify plagiarism of the paper written in Macedonian and translated in foreign language. Original article "Ethics in Medical Research Involving Human Subjects", written in Macedonian, was submitted as an assay-2 for the subject Ethics and published by Ilina Stefanovska, PhD candidate from the Iustinianus Primus Faculty of Law, Ss Cyril and Methodius University of Skopje (UKIM), Skopje, Republic of Macedonia in Fabruary, 2013. Suspected article for plagiarism was published by Prof. Dr. Gordana Panova from the Faculty of Medical Sciences, University Goce Delchev, Shtip, Republic of Macedonia in English with the identical title and identical content in International scientific on-line journal "SCIENCE & TECHNOLOGIES", Publisher "Union of Scientists - Stara Zagora". Original document (written in Macedonian) was translated with Google Translator; suspected article (published in English pdf file) was converted into Word document, and compared both documents with several programs for plagiarism detection. It was found that both documents are identical in 71%, 78% and 82%, respectively, depending on the computer program used for plagiarism detection. It was obvious that original paper was entirely plagiarised by Prof. Dr. Gordana Panova, including six references from the original paper. Plagiarism of the original papers written in Macedonian and translated in other languages can be verified after computerised translation in other languages. Later on, original and translated documents can be compared with available software for plagiarism detection.

Manual signs as augmentative and alternative communication system. Review article

Directory of Open Access Journals (Sweden)

Fàtima Vega Llobera

2014-06-01

Full Text Available There is a long tradition of scientific evidence about using hand signals simultaneously with oral language to promote the development of communication and language in children with or without disabilities. This article aims to review and analyze intervention work focused on the use of manual signs as augmentative communication system (AAC in hearing participants. Several criteria were used to narrow the search, selection, coding and synthesis of the 50 original scientific papers have finally been part of the review. The included studies were edited from 1970 to the present, at a national and international level and were published in English and Spanish. The bibliographic compilation was performed through searches by keyword in bibliographic databases, with the help of search engines (Google Scholar and through secondary searches. From each of the scientific articles the following data was extracted: year of the study, the country of origin, the characteristics of the participants, the design and the methodology and the obtained results. This information has been analyzed and compared. The results of the study highlight that, despite the diversity in results, the signing use as augmentative communication system is effective to improve language development, receptive and expressive level.

EDITORIAL: 'Key issues' articles in Reports on Progress in Physics

Science.gov (United States)

Greene, Laura H.

2007-03-01

The Editorial Board of Reports on Progress in Physics has commissioned a series of short articles from world leaders on key physics issues in their field. These essays may raise the key issues, or ask open questions or may even suggest wild ideas. Basically, they give world leading physicists the opportunity to write what they think about the key issues in their field, free from the usual requirement to provide the fair and balanced presentations of the subject normally found in articles in Reports on Progress in Physics. We believe that the readers of the journal will be interested to learn about these exciting ideas. Just as Hilbert's famous paper of 1900 set the agenda for the next century or more in mathematics, so we hope that this series of papers will define the key issues and open questions in physics for the 21st Century and that the articles will be widely cited and downloaded. The first of these articles—'Insights from simulations of star formation' by Richard B Larson (Yale University, USA)—is published in the current issue. We trust that readers will find this article and its successors in the series to appear through 2007 and beyond entertaining and stimulating.

Using the College/University Library for a Term Paper.

Science.gov (United States)

Shaughnessy, Michael F.; Eastham, Nicholas

This paper reviews basic information needed by college students to write a term paper. Sources of information are discussed (i.e. books and journal articles), as are the "nuts and bolts" of procuring the needed information to write a quality term paper. The ERIC system and the Internet are discussed; particular attention is paid to the…

Mining biological networks from full-text articles.

Science.gov (United States)

Czarnecki, Jan; Shepherd, Adrian J

2014-01-01

The study of biological networks is playing an increasingly important role in the life sciences. Many different kinds of biological system can be modelled as networks; perhaps the most important examples are protein-protein interaction (PPI) networks, metabolic pathways, gene regulatory networks, and signalling networks. Although much useful information is easily accessible in publicly databases, a lot of extra relevant data lies scattered in numerous published papers. Hence there is a pressing need for automated text-mining methods capable of extracting such information from full-text articles. Here we present practical guidelines for constructing a text-mining pipeline from existing code and software components capable of extracting PPI networks from full-text articles. This approach can be adapted to tackle other types of biological network.

Oral Health and Coronary Artery Disease, A Review Article

Directory of Open Access Journals (Sweden)

Alireza Rostami

2016-03-01

Full Text Available Atherosclerosis is the most common cause of myocardial infarction and ischemic stroke. Various risk factors have been identified for atherosclerosis. Recently, bacterial and viral organisms, which are involved in chronic inflammatory processes, have been also implicated in atherosclerosis development. Individuals with a prior history of periodontal diseases and/or tooth loss are considered to be at a higher risk for peripheral arterial disease, compared to those without periodontal diseases or tooth loss. Evidence suggests that periodontitis contributes to the overall burden of infection and inflammation and may lead to cardiovascular events and stroke in susceptible patients. In this article, we aimed to review the available data on the relationship between periodontal diseases and cardiovascular diseases, especially coronary artery disease. At least sixty papers were reviewed during 2014-15. Of these, 44 were included in our study.

Underutilisation of routinely collected data in the HIV programme in Zambia: a review of quantitatively analysed peer-reviewed articles.

Science.gov (United States)

Munthali, Tendai; Musonda, Patrick; Mee, Paul; Gumede, Sehlulekile; Schaap, Ab; Mwinga, Alwyn; Phiri, Caroline; Kapata, Nathan; Michelo, Charles; Todd, Jim

2017-06-13

The extent to which routinely collected HIV data from Zambia has been used in peer-reviewed published articles remains unexplored. This paper is an analysis of peer-reviewed articles that utilised routinely collected HIV data from Zambia within six programme areas from 2004 to 2014. Articles on HIV, published in English, listed in the Directory of open access journals, African Journals Online, Google scholar, and PubMed were reviewed. Only articles from peer-reviewed journals, that utilised routinely collected data and included quantitative data analysis methods were included. Multi-country studies involving Zambia and another country, where the specific results for Zambia were not reported, as well as clinical trials and intervention studies that did not take place under routine care conditions were excluded, although community trials which referred patients to the routine clinics were included. Independent extraction was conducted using a predesigned data collection form. Pooled analysis was not possible due to diversity in topics reviewed. A total of 69 articles were extracted for review. Of these, 7 were excluded. From the 62 articles reviewed, 39 focused on HIV treatment and retention in care, 15 addressed prevention of mother-to-child transmission, 4 assessed social behavioural change, and 4 reported on voluntary counselling and testing. In our search, no articles were found on condom programming or voluntary male medical circumcision. The most common outcome measures reported were CD4+ count, clinical failure or mortality. The population analysed was children in 13 articles, women in 16 articles, and both adult men and women in 33 articles. During the 10 year period of review, only 62 articles were published analysing routinely collected HIV data in Zambia. Serious consideration needs to be made to maximise the utility of routinely collected data, and to benefit from the funds and efforts to collect these data. This could be achieved with government support

Polio vaccines: WHO position paper, March 2016-recommendations.

Science.gov (United States)

World Health Organization

2017-03-01

This article presents the World Health Organization's (WHO) recommendations on the use of polio vaccine excerpted from the WHO position paper on polio vaccines - March 2016, published in the Weekly Epidemiological Record [1]. This position paper on polio vaccines replaces the 2014 WHO position paper [2]. The position paper summarizes the WHO position on the introduction of at least one dose of inactivated polio vaccine (IPV) into routine immunization schedules as a strategy to mitigate the potential risk of re-emergence of type 2 polio following the withdrawal of Sabin type 2 strains from oral polio vaccine (OPV) [3]. Footnotes to this paper provide a number of core references including references to grading tables that assess the quality of the scientific evidence, and to the evidence-to-recommendation table. In accordance with its mandate to provide guidance to Member States on health policy matters, WHO issues a series of regularly updated position papers on vaccines and combinations of vaccines against diseases that have an international public health impact. These papers are concerned primarily with the use of vaccines in large-scale immunization programmes; they summarize essential background information on diseases and vaccines, and conclude with WHO's current position on the use of vaccines in the global context. This position paper reflects the global switch from trivalent to bivalent OPV which took place in April 2016. Recommendations on the use of polio vaccines have been discussed on multiple occasions by SAGE, most recently in October 2016; evidence presented at these meetings can be accessed at: http://www.who.int/immunization/sage/previous/en/index.html. Copyright © 2016 Elsevier Ltd. All rights reserved.

The 100 most cited articles in dentistry.

Science.gov (United States)

Feijoo, Javier F; Limeres, Jacobo; Fernández-Varela, Marta; Ramos, Isabel; Diz, Pedro

2014-04-01

To identify the 100 most cited articles published in dental journals. A search was performed on the Institute for Scientific Information (ISI) Web of Science for the most cited articles in all the journals included in the Journal Citation Report (2010 edition) in the category of "Dentistry, Oral Surgery, and Medicine". Each one of the 77 journals selected was analyzed using the Cited Reference Search tool of the ISI Web of Science database to identify the most cited articles up to June 2012. The following information was gathered from each article: names and number of authors, journal, year of publication, type of study, methodological design, and area of research. The number of citations of the 100 selected articles varied from 326 to 2050. All articles were published in 21 of the 77 journals in the category. The journals with the largest number of the cited articles were the Journal of Clinical Periodontology (20 articles), the Journal of Periodontology (18 articles), and the Journal of Dental Research (16 articles). There was a predominance of clinical research (66 %) over basic research (34 %). The most frequently named author was Socransky SS, with 9 of the top 100 articles, followed by Lindhe J with 7. The decades with most articles published of the 100 selected were 1980-1989 (26 articles) and 1990-1999 (25 articles). The most common type of article was the case series (22 %), followed by the narrative review/expert opinion (19 %). The most common area of study was periodontology (43 % of articles). To our knowledge, this is the first report of the top-cited articles in Dentistry. There is a predominance of clinical studies, particularly case series and narrative reviews/expert opinions, despite their low-evidence level. The focus of the articles has mainly been on periodontology and implantology, and the majority has been published in the highest impact factor dental journals. The number of citations that an article receives does not necessarily reflect the

Recent research efforts in the area of biotechnology for fuels and chemicals: Poster session papers

Energy Technology Data Exchange (ETDEWEB)

Antonopoulos, A.A. [Argonne National Lab., IL (United States); Grohmann, K. [US Citrus and Subtropical Products Lab., Winter Haven, FL (United States)

1992-09-01

This report presents research presented at the poster session of the Symposium covering a wide spectrum of current biotechnological research activities. Research focused mostly on ethanol production and methane generation from biomass material via microbial processing, as well as on enhanced hydrogen yield from algae. Several of the posters dealt with the pretreatment of cellulosic materials, and enzyme production/characterization, while a good number of papers displayed research efforts on bioremediation, photosynthesis, production of various useful chemicals from biomass by bioprocessing, and on other miscellaneous subjects. One of the papers treated a very interesting topic of cellulose-cellulase complexes. Many of the poster papers are included in this volume, and a synopsis of all the poster/papers presented is the subject of this article.

Recent research efforts in the area of biotechnology for fuels and chemicals: Poster session papers

Energy Technology Data Exchange (ETDEWEB)

Antonopoulos, A.A. (Argonne National Lab., IL (United States)); Grohmann, K. (US Citrus and Subtropical Products Lab., Winter Haven, FL (United States))

1992-01-01

This report presents research presented at the poster session of the Symposium covering a wide spectrum of current biotechnological research activities. Research focused mostly on ethanol production and methane generation from biomass material via microbial processing, as well as on enhanced hydrogen yield from algae. Several of the posters dealt with the pretreatment of cellulosic materials, and enzyme production/characterization, while a good number of papers displayed research efforts on bioremediation, photosynthesis, production of various useful chemicals from biomass by bioprocessing, and on other miscellaneous subjects. One of the papers treated a very interesting topic of cellulose-cellulase complexes. Many of the poster papers are included in this volume, and a synopsis of all the poster/papers presented is the subject of this article.

The statistical reporting quality of articles published in 2010 in five dental journals.

Science.gov (United States)

Vähänikkilä, Hannu; Tjäderhane, Leo; Nieminen, Pentti

2015-01-01

Statistical methods play an important role in medical and dental research. In earlier studies it has been observed that current use of methods and reporting of statistics are responsible for some of the errors in the interpretation of results. The aim of this study was to investigate the quality of statistical reporting in dental research articles. A total of 200 articles published in 2010 were analysed covering five dental journals: Journal of Dental Research, Caries Research, Community Dentistry and Oral Epidemiology, Journal of Dentistry and Acta Odontologica Scandinavica. Each paper underwent careful scrutiny for the use of statistical methods and reporting. A paper with at least one poor reporting item has been classified as 'problems with reporting statistics' and a paper without any poor reporting item as 'acceptable'. The investigation showed that 18 (9%) papers were acceptable and 182 (91%) papers contained at least one poor reporting item. The proportion of at least one poor reporting item in this survey was high (91%). The authors of dental journals should be encouraged to improve the statistical section of their research articles and to present the results in such a way that it is in line with the policy and presentation of the leading dental journals.

Social Network Analysis of Scientific Articles Published by Food Policy

Directory of Open Access Journals (Sweden)

József Popp

2018-02-01

Full Text Available The article analyses co-authorship and co-citation networks in Food Policy, which is the most important agricultural policy journal in the field of agricultural economics. The paper highlights the principal researchers in this field together with their authorship and citation networks on the basis of 714 articles written between 2006 and 2015. Results suggest that the majority of the articles were written by a small number of researchers, indicating that groups and central authors play an important role in scientific advances. It also turns out that the number of articles and the central role played in the network are not related, contrary to expectations. Results also suggest that groups cite themselves more often than average, thereby boosting the scientific advancement of their own members.

Original Research Paper

OpenAIRE

Allahverdi, Novruz

2014-01-01

This paper is the survey of studies that include design processes of some fuzzy expert systems for applications in some medical area. Recent studies of us that include fuzzy expert systems that make use of fuzzy logic method were described. Some of fuzzy expert systems mentioned in this paper have been developed as first time. Followings were investigated; the risk of prostate cancer, risk of coronary heart disease, degree of child anemia, determination the level of iron deficiency anemia, di...

How to Write a Journal Article for PSN.

Science.gov (United States)

Hotta, Tracey

Are you considering writing a journal article for Plastic Surgical Nursing? This official journal of the American Society of Plastic Surgical Nurses presents the latest advances in plastic and reconstructive surgical nursing practice. The journal features clinical articles covering a wide variety of surgical and nonsurgical procedures. Patient education techniques and research findings are also included, as well as articles discussing the ethical issues and trends in this expanding clinical nursing specialty. This is a perfect forum to share your knowledge with others in the plastic surgery field, resulting in improved patient care. The editorial board is established and available to assist you in the writing process. It is important to know that you do not have to be an academic scholar to write an article; instead, you have information that you would like to share. This article is intended to provide key points to follow to make sure that writing your article is a positive experience.

Brazilian scientific articles on “Spirituality, Religion and Health”

Directory of Open Access Journals (Sweden)

Rodolfo F. Damiano

2016-02-01

Full Text Available Abstract Background Studies on “Spirituality, religion and health” (R/S have been increasing worldwide, including in Brazil. Mapping this production can help researchers to understand this field and also to identify gaps in the Brazilian R/S studies. Objective To analyze the Brazilian scientific articles on “Religion, Spirituality and Health” available on the main electronic databases using a bibliometric approach. Methods A comprehensive review of four major databases (PubMed, Scopus, BVS and Web of Science was conducted. Three reviewers performed the data analysis. Off-topic articles, articles from Portugal, books and thesis were excluded. Articles were then classified by: Publication year, journal, Central focus in R/S, Academic Area, Main topic and Study Type. Results From 3,963 articles found, 686 studies were included in the final analysis (320 had central focus on R/S. There was an increase of articles in the last decade (most observational, with predominance of mental health issues, and from journals in the field of psychiatry, public health and nursing. Discussion This study enabled us to widen our understanding about how the field of “spirituality, religion and health” has been established and how this field is increasing in Brazil. These findings can help in the development of future Brazilian studies.

Script of Healthcare Technology: Do Designs of Robotic Beds Exclude or Include Users?

DEFF Research Database (Denmark)

Brodersen, Søsser Grith Kragh; Hansen, Meiken; Lindegaard, Hanne

2015-01-01

Many new product designs are currently being implemented in the healthcare sector, and this presents designers with challenges involved in socially innovative design. In this paper, we argue that designing assistive technologies requires focus on multiple users and use practices. We see the design...... of assistive technologies as design of socio-material assemblies , which include an analysis of the products already used in relation to multiple users, their practices and wishes. In the article we focus on the challenges in the implementation of two types of robotic beds used for disability care...

[How to write an article: formal aspects].

Science.gov (United States)

Corral de la Calle, M A; Encinas de la Iglesia, J

2013-06-01

Scientific research and the publication of the results of the studies go hand in hand. Exquisite research methods can only be adequately reflected in formal publication with the optimum structure. To ensure the success of this process, it is necessary to follow orderly steps, including selecting the journal in which to publish and following the instructions to authors strictly as well as the guidelines elaborated by diverse societies of editors and other institutions. It is also necessary to structure the contents of the article in a logical and attractive way and to use an accurate, clear, and concise style of language. Although not all the authors are directly involved in the actual writing, elaborating a scientific article is a collective undertaking that does not finish until the article is published. This article provides practical advice about formal and not-so-formal details to take into account when writing a scientific article as well as references that will help readers find more information in greater detail. Copyright © 2012 SERAM. Published by Elsevier Espana. All rights reserved.

Methodological Reporting in Qualitative, Quantitative, and Mixed Methods Health Services Research Articles

Science.gov (United States)

Wisdom, Jennifer P; Cavaleri, Mary A; Onwuegbuzie, Anthony J; Green, Carla A

2012-01-01

Objectives Methodologically sound mixed methods research can improve our understanding of health services by providing a more comprehensive picture of health services than either method can alone. This study describes the frequency of mixed methods in published health services research and compares the presence of methodological components indicative of rigorous approaches across mixed methods, qualitative, and quantitative articles. Data Sources All empirical articles (n = 1,651) published between 2003 and 2007 from four top-ranked health services journals. Study Design All mixed methods articles (n = 47) and random samples of qualitative and quantitative articles were evaluated to identify reporting of key components indicating rigor for each method, based on accepted standards for evaluating the quality of research reports (e.g., use of p-values in quantitative reports, description of context in qualitative reports, and integration in mixed method reports). We used chi-square tests to evaluate differences between article types for each component. Principal Findings Mixed methods articles comprised 2.85 percent (n = 47) of empirical articles, quantitative articles 90.98 percent (n = 1,502), and qualitative articles 6.18 percent (n = 102). There was a statistically significant difference (χ2(1) = 12.20, p = .0005, Cramer's V = 0.09, odds ratio = 1.49 [95% confidence interval = 1,27, 1.74]) in the proportion of quantitative methodological components present in mixed methods compared to quantitative papers (21.94 versus 47.07 percent, respectively) but no statistically significant difference (χ2(1) = 0.02, p = .89, Cramer's V = 0.01) in the proportion of qualitative methodological components in mixed methods compared to qualitative papers (21.34 versus 25.47 percent, respectively). Conclusion Few published health services research articles use mixed methods. The frequency of key methodological components is variable. Suggestions are provided to increase the

Analysis of Statistical Methods and Errors in the Articles Published in the Korean Journal of Pain

Science.gov (United States)

Yim, Kyoung Hoon; Han, Kyoung Ah; Park, Soo Young

2010-01-01

Background Statistical analysis is essential in regard to obtaining objective reliability for medical research. However, medical researchers do not have enough statistical knowledge to properly analyze their study data. To help understand and potentially alleviate this problem, we have analyzed the statistical methods and errors of articles published in the Korean Journal of Pain (KJP), with the intention to improve the statistical quality of the journal. Methods All the articles, except case reports and editorials, published from 2004 to 2008 in the KJP were reviewed. The types of applied statistical methods and errors in the articles were evaluated. Results One hundred and thirty-nine original articles were reviewed. Inferential statistics and descriptive statistics were used in 119 papers and 20 papers, respectively. Only 20.9% of the papers were free from statistical errors. The most commonly adopted statistical method was the t-test (21.0%) followed by the chi-square test (15.9%). Errors of omission were encountered 101 times in 70 papers. Among the errors of omission, "no statistics used even though statistical methods were required" was the most common (40.6%). The errors of commission were encountered 165 times in 86 papers, among which "parametric inference for nonparametric data" was the most common (33.9%). Conclusions We found various types of statistical errors in the articles published in the KJP. This suggests that meticulous attention should be given not only in the applying statistical procedures but also in the reviewing process to improve the value of the article. PMID:20552071

What do reviewers look for in an original research article?

Science.gov (United States)

Shankar, P R

2012-01-01

In this article common errors committed by authors especially those, whose first language is not English, while writing an original research articleis described. Avoiding common errors and improving chances of publication has also been covered. This article may resemble instruction to the author. However, tips from reviewer's eyes has been given. The abstract is the section of the paper most commonly read and care should be taken while writing this section. Keywordsare usedto retrieve articles following searches and use of words from the MeSH database is recommended.The introduction describes work already conducted in the particular area and briefly mentions how the manuscript will add to the existing knowledge.The methods section describes how the study was conducted, is written in the past tense and is often the first part of the paper to be written. The results describe what was found in the study and is usually written after the methods section.The discussion compares the study with the literature and helps to put the study findings in context. The conclusions should be based on the results of the study. The references should be written strictly according to the journal format. Language should be simple, active voice should be used and jargon avoided. Avoid directly quoting from reference articles and paraphrase these in your own words to avoid plagiarism.

Medical Articles in Eighteenth Century American Magazines

Science.gov (United States)

Coggins, Clemency Chase

1965-01-01

Formal medical publication began in the United States with The Medical Repository in 1797. Between 1741, the date of the first American magazine, and 1797 medical articles were included in general magazines. This study deals with ten representative magazines and reviews their general content. The varying content of the medical articles is analyzed into broad categories, and several important physicians, contributors to the magazines, are discussed. The Medical Repository is treated as a culmination of eighteenth century medical publication. PMID:14306031

Citing Journal Articles in Social Sciences Blogs

Directory of Open Access Journals (Sweden)

Hamid Reza Jamali

2015-05-01

Full Text Available This article aims to analyze motivations behind social sciences blog posts citing journal articles in order to find out whether blog citations of scholarly journal articles are good indicators for the societal impact of research. A random sample of 300 social sciences blog posts (out of 1,233 blog posts from ResearchBlogging published between 01/01/2012 to 18/06/2014 were subjected to content analysis. An existing categorization scheme was used and modified inductively. The 300 blog posts had 472 references including 424 journal articles from 269 different journals. Sixty-one (22.68% of all journals cited were from the category of social sciences and most of the journals with high frequency were highly cited general science journals such as PNAS and Science. Seventy-five percent of all journals were referenced only once. The average age of articles cited was 5.8 years. The most frequent (38, 12.67% motivation was to ‘neutrally presenting details of a study’. Overall, social science blogs were rather subject-oriented than article oriented. This means a considerable number of blog posts were not driven simply by writing about an article, instead bloggers tend to write about their subject of interest and use references to support their argument. The study shows the potential of blog citations as an altmetric measure and as a proxy for assessing the research impact.

A Theoretical Basis for Adult Learning Facilitation: Review of Selected Articles

Science.gov (United States)

Muneja, Mussa S.

2015-01-01

The aim of this paper is to synthesize a theoretical basis for adult learning facilitation in order to provide a valuable systematic resource in the field of adult education. The paper has reviewed 6 journal articles with topics ranging from theory of andragogy; the effect of globalization on adult learning; the contribution of Malcolm Knowles;…

Feasible Application Area Study for Linear Laser Cutting in Paper Making Processes

Science.gov (United States)

Happonen, A.; Stepanov, A.; Piili, H.

Traditional industry sectors, like paper making industry, tend to stay within well-known technology rather than going forward towards promising, but still quite new technical solutions and applications. This study analyses the feasibility of the laser cutting in large-scale industrial paper making processes. Aim was to reveal development and process related challenges and improvement potential in paper making processes by utilizing laser technology. This study has been carried out, because there still seems to be only few large-scale industrial laser processing applications in paper converting processes worldwide, even in the beginning of 2010's. Because of this, the small-scale use of lasers in paper material manufacturing industry is related to a shortage of well-known and widely available published research articles and published measurement data (e.g. actual achieved cut speeds with high quality cut edges, set-up times and so on). It was concluded that laser cutting has strong potential in industrial applications for paper making industries. This potential includes quality improvements and a competitive advantage for paper machine manufacturers and industry. The innovations have also added potential, when developing new paper products. An example of these kinds of products are ones with printed intelligence, which could be a new business opportunity for the paper industries all around the world.

Position paper on the impact of including methane number in natural gas regulation

International Nuclear Information System (INIS)

2014-01-01

GIIGNL has developed a position paper to describe methane number and the possible impact on the LNG market of a future regulation/specification for this parameter which is linked to natural gas quality. Currently, there are several standards describing calculation methods of natural gas methane number, but there are doubts about their reliability and the results differ from each other. No official regulation which states a minimum value for methane number of natural gas has been identified. A methane number of 80, as recommended by some organisations in Europe, would endanger the LNG supply to the market, limiting acceptable LNG sources, or would require expensive gas treatment. In the long term, if there is a market for high methane number natural gas, this may be an opportunity for LNG terminals able to adjust or manage supplies to the desired methane number

The Importance of Proper Citation of References in Biomedical Articles

Science.gov (United States)

Masic, Izet

2013-01-01

In scientific circles, the reference is the information that is necessary to the reader in identifying and finding used sources. The basic rule when listing the sources used is that references must be accurate, complete and should be consistently applied. On the other hand, quoting implies verbatim written or verbal repetition of parts of the text or words written by others that can be checked in original. Authors of every new scientific article need to explain how their study or research fits with previous one in the same or similar fields. A typical article in the health sciences refers to approximately 20-30 other articles published in peer reviewed journals, cite once or hundreds times. Citations typically appear in two formats: a) as in-text citations where the sources of information are briefly identified in the text; or b) in the reference list at the end of the publication (book chapter, manuscript, article, etc.) that provides full bibliographic information for each source. Group of publishers met in Vancouver in 1978 and decided to prescribe uniform technical propositions for publication. Adopted in the 1979 by the National Library of Medicine in Bethesda, then the International Committee of Medical Journals Editors (ICMJE), whose review in 1982 entered the official application by 300 international biomedical journals. Authors writing articles for publication in biomedical publications used predominantly citation styles: Vancouver style, Harward style, PubMed style, ICMJE, APA, etc. The paper gives examples of all of these styles of citation to the authors in order to facilitate their applications. Also in this paper is given the review about the problem of plagiarism which becomes more common in the writing of scientific and technical articles in biomedicine. PMID:24167381

The importance of proper citation of references in biomedical articles.

Science.gov (United States)

Masic, Izet

2013-01-01

In scientific circles, the reference is the information that is necessary to the reader in identifying and finding used sources. The basic rule when listing the sources used is that references must be accurate, complete and should be consistently applied. On the other hand, quoting implies verbatim written or verbal repetition of parts of the text or words written by others that can be checked in original. Authors of every new scientific article need to explain how their study or research fits with previous one in the same or similar fields. A typical article in the health sciences refers to approximately 20-30 other articles published in peer reviewed journals, cite once or hundreds times. Citations typically appear in two formats: a) as in-text citations where the sources of information are briefly identified in the text; or b) in the reference list at the end of the publication (book chapter, manuscript, article, etc.) that provides full bibliographic information for each source. Group of publishers met in Vancouver in 1978 and decided to prescribe uniform technical propositions for publication. Adopted in the 1979 by the National Library of Medicine in Bethesda, then the International Committee of Medical Journals Editors (ICMJE), whose review in 1982 entered the official application by 300 international biomedical journals. Authors writing articles for publication in biomedical publications used predominantly citation styles: Vancouver style, Harward style, PubMed style, ICMJE, APA, etc. The paper gives examples of all of these styles of citation to the authors in order to facilitate their applications. Also in this paper is given the review about the problem of plagiarism which becomes more common in the writing of scientific and technical articles in biomedicine.

Adventures in semantic publishing: exemplar semantic enhancements of a research article.

Directory of Open Access Journals (Sweden)

David Shotton

2009-04-01

Full Text Available Scientific innovation depends on finding, integrating, and re-using the products of previous research. Here we explore how recent developments in Web technology, particularly those related to the publication of data and metadata, might assist that process by providing semantic enhancements to journal articles within the mainstream process of scholarly journal publishing. We exemplify this by describing semantic enhancements we have made to a recent biomedical research article taken from PLoS Neglected Tropical Diseases, providing enrichment to its content and increased access to datasets within it. These semantic enhancements include provision of live DOIs and hyperlinks; semantic markup of textual terms, with links to relevant third-party information resources; interactive figures; a re-orderable reference list; a document summary containing a study summary, a tag cloud, and a citation analysis; and two novel types of semantic enrichment: the first, a Supporting Claims Tooltip to permit "Citations in Context", and the second, Tag Trees that bring together semantically related terms. In addition, we have published downloadable spreadsheets containing data from within tables and figures, have enriched these with provenance information, and have demonstrated various types of data fusion (mashups with results from other research articles and with Google Maps. We have also published machine-readable RDF metadata both about the article and about the references it cites, for which we developed a Citation Typing Ontology, CiTO (http://purl.org/net/cito/. The enhanced article, which is available at http://dx.doi.org/10.1371/journal.pntd.0000228.x001, presents a compelling existence proof of the possibilities of semantic publication. We hope the showcase of examples and ideas it contains, described in this paper, will excite the imaginations of researchers and publishers, stimulating them to explore the possibilities of semantic publishing for their own

Selfish memes: An update of Richard Dawkins’ bibliometric analysis of key papers in sociobiology

OpenAIRE

Aaen-Stockdale, Craig

2017-01-01

This is an Open Access journal available from http://www.mdpi.com/ In the second edition of The Selfish Gene, Richard Dawkins included a short bibliometric analysis of key papers instrumental to the sociobiological revolution, the intention of which was to support his proposal that ideas spread within a population in an epidemiological manner. In his analysis, Dawkins primarily discussed the influence of an article by British evolutionary biologist William Donald Hamilton which had introdu...

AN IMPLEMENTATION OF EIS-SVM CLASSIFIER USING RESEARCH ARTICLES FOR TEXT CLASSIFICATION

Directory of Open Access Journals (Sweden)

B Ramesh

2016-04-01

Full Text Available Automatic text classification is a prominent research topic in text mining. The text pre-processing is a major role in text classifier. The efficiency of pre-processing techniques is increasing the performance of text classifier. In this paper, we are implementing ECAS stemmer, Efficient Instance Selection and Pre-computed Kernel Support Vector Machine for text classification using recent research articles. We are using better pre-processing techniques such as ECAS stemmer to find root word, Efficient Instance Selection for dimensionality reduction of text data and Pre-computed Kernel Support Vector Machine for classification of selected instances. In this experiments were performed on 750 research articles with three classes such as engineering article, medical articles and educational articles. The EIS-SVM classifier provides better performance in real-time research articles classification.

Other relevant biological papers

International Nuclear Information System (INIS)

Shimizu, M.

1989-01-01

A considerable number of CRESP-relevant papers concerning deep-sea biology and radioecology have been published. It is the purpose of this study to call attention to them. They fall into three general categories. The first is papers of general interest. They are mentioned only briefly, and include text references to the global bibliography at the end of the volume. The second are papers that are not only mentioned and referenced, but for various reasons are described in abstract form. The last is a list of papers compiled by H.S.J. Roe specifically for this volume. They are listed in bibliographic form, and are also included in the global bibliography at the end of the volume

Paper based electronics platform

KAUST Repository

Nassar, Joanna Mohammad

2017-07-20

A flexible and non-functionalized low cost paper-based electronic system platform fabricated from common paper, such as paper based sensors, and methods of producing paper based sensors, and methods of sensing using the paper based sensors are provided. A method of producing a paper based sensor can include the steps of: a) providing a conventional paper product to serve as a substrate for the sensor or as an active material for the sensor or both, the paper product not further treated or functionalized; and b) applying a sensing element to the paper substrate, the sensing element selected from the group consisting of a conductive material, the conductive material providing contacts and interconnects, sensitive material film that exhibits sensitivity to pH levels, a compressible and/or porous material disposed between a pair of opposed conductive elements, or a combination of two of more said sensing elements. The method of sensing can further include measuring, using the sensing element, a change in resistance, a change in voltage, a change in current, a change in capacitance, or a combination of any two or more thereof.

Academic Primer Series: Key Papers About Peer Review.

Science.gov (United States)

Yarris, Lalena M; Gottlieb, Michael; Scott, Kevin; Sampson, Christopher; Rose, Emily; Chan, Teresa M; Ilgen, Jonathan

2017-06-01

Peer review, a cornerstone of academia, promotes rigor and relevance in scientific publishing. As educators are encouraged to adopt a more scholarly approach to medical education, peer review is becoming increasingly important. Junior educators both receive the reviews of their peers, and are also asked to participate as reviewers themselves. As such, it is imperative for junior clinician educators to be well-versed in the art of peer reviewing their colleagues' work. In this article, our goal was to identify and summarize key papers that may be helpful for faculty members interested in learning more about the peer-review process and how to improve their reviewing skills. The online discussions of the 2016-17 Academic Life in Emergency Medicine (ALiEM) Faculty Incubator program included a robust discussion about peer review, which highlighted a number of papers on that topic. We sought to augment this list with further suggestions by guest experts and by an open call on Twitter for other important papers. Via this process, we created a list of 24 total papers on the topic of peer review. After gathering these papers, our authorship group engaged in a consensus-building process incorporating Delphi methods to identify the papers that best described peer review, and also highlighted important tips for new reviewers. We found and reviewed 24 papers. In our results section, we present our authorship group's top five most highly rated papers on the topic of peer review. We also summarize these papers with respect to their relevance to junior faculty members and to faculty developers. We present five key papers on peer review that can be used for faculty development for novice writers and reviewers. These papers represent a mix of foundational and explanatory papers that may provide some basis from which junior faculty members might build upon as they both undergo the peer-review process and act as reviewers in turn.

Toward an interactive article: integrating journals and biological databases

Directory of Open Access Journals (Sweden)

Marygold Steven J

2011-05-01

Full Text Available Abstract Background Journal articles and databases are two major modes of communication in the biological sciences, and thus integrating these critical resources is of urgent importance to increase the pace of discovery. Projects focused on bridging the gap between journals and databases have been on the rise over the last five years and have resulted in the development of automated tools that can recognize entities within a document and link those entities to a relevant database. Unfortunately, automated tools cannot resolve ambiguities that arise from one term being used to signify entities that are quite distinct from one another. Instead, resolving these ambiguities requires some manual oversight. Finding the right balance between the speed and portability of automation and the accuracy and flexibility of manual effort is a crucial goal to making text markup a successful venture. Results We have established a journal article mark-up pipeline that links GENETICS journal articles and the model organism database (MOD WormBase. This pipeline uses a lexicon built with entities from the database as a first step. The entity markup pipeline results in links from over nine classes of objects including genes, proteins, alleles, phenotypes and anatomical terms. New entities and ambiguities are discovered and resolved by a database curator through a manual quality control (QC step, along with help from authors via a web form that is provided to them by the journal. New entities discovered through this pipeline are immediately sent to an appropriate curator at the database. Ambiguous entities that do not automatically resolve to one link are resolved by hand ensuring an accurate link. This pipeline has been extended to other databases, namely Saccharomyces Genome Database (SGD and FlyBase, and has been implemented in marking up a paper with links to multiple databases. Conclusions Our semi-automated pipeline hyperlinks articles published in GENETICS to

Retrospective analysis and think of original papers of gastrointestinal imageology for 46 years in chinese journal of radiology

International Nuclear Information System (INIS)

Cheng Yingsheng; Shang Kezhong

2001-01-01

Objective: To retrospectively analyze and think the original papers of gastrointestinal (GI) imageology for 46 years in Chinese Journal of Radiology (CJR), meeting a huge challenge of Chinese GI imageology in alternation of generations. Methods: From October 1953 to October 1999, a review of original articles of GI imageology in CJR was conducted. Results: Within 46 years of GI imageology evolution, 211 published original articles of CJR included 79 original papers of radiography and single contrast radiography, 73 original papers of double contrast radiography, 21 original paper of interventional radiology, 15 original papers of CT and MR and CR (computed radiography), 9 original papers of experiment study, and 4 original papers of comprehensive imaging applications. There were different dominant imaging applications at different times, radiography and single contrast radiography in fifties and sixties, double contrast radiography and CT diagnosis in seventies and eighties, and comprehensive applications of CT and MR and CR and interventional radiology in nineties. Conclusion: In GI imageology for 46 years, double contrast radiography in X-ray diagnosis was the main method of imaging diagnosis, CT and MR and CR diagnosis were important means of recruit; interventional radiology was an important section of GI imageology in nineties

Deformable paper origami optoelectronic devices

KAUST Repository

He, Jr-Hau; Lin, Chun-Ho

2017-01-01

Deformable optoelectronic devices are provided, including photodetectors, photodiodes, and photovoltaic cells. The devices can be made on a variety of paper substrates, and can include a plurality of fold segments in the paper substrate creating a

Examining the Distribution, Modularity, and Community Structure in Article Networks for Systematic Reviews.

Science.gov (United States)

Ji, Xiaonan; Machiraju, Raghu; Ritter, Alan; Yen, Po-Yin

2015-01-01

Systematic reviews (SRs) provide high quality evidence for clinical practice, but the article screening process is time and labor intensive. As SRs aim to identify relevant articles with a specific scope, we propose that a pre-defined article relationship, using similarity metrics, could accelerate this process. In this study, we established the article relationship using MEDLINE element similarities and visualized the article network with the Force Atlas layout. We also analyzed the article networks with graph diameter, closeness centrality, and module classes. The results revealed the distribution of articles and found that included articles tended to aggregate together in some module classes, providing further evidence of the existence of strong relationships among included articles. This approach can be utilized to facilitate the articles selection process through early identification of these dominant module classes. We are optimistic that the use of article network visualization can help better SR work prioritization.

SLAC/SPIRES Announces the Top-Cited Papers of 2000

International Nuclear Information System (INIS)

O'Connell, Heath B

2002-01-01

Physicists who search the literature on elementary particles know that the SLAC library's SPIRES-HEP database provides an essential tool. The database lists virtually every paper published or even preprinted in high energy physics over the past thirty years. The database connects preprint or eprint versions to articles published in journals or conference proceedings, providing access to all phases of the publication history. In addition, most papers have backward links to the papers they cite and forward links to the papers citing them. These citation linkages provide a very effective means of searching the literature on any topic of interest. In the past few years, SPIRES-HEP has been automatically harvesting reference citations from eprints, creating a web of links which indexes the literature in a quite thorough manner. As a byproduct of this citation linkage, SPIRES-HEP can easily search out the papers most highly cited by publications in high-energy physics. The list of papers with the most citations in a given year provides a snapshot of the hottest topics that have engaged the attention of theorists and experimenters. For the past several years, SPIRES-HEP has posted a scientific review of the year's top-cited papers. The whole collection of these reviews can be found on the Web at: http://www.slac.stanford.edu/library/topcites/. We have recently posted the topcite lists for the year 2000. These materials include a list of the papers with more than 100 citations in the past year, and a list of the paper with more than 1000 citations over the history of the SPIRES-HEP database

[Bibliometric analysis of scientific articles on rehabilitation nursing for adult burn patients in China].

Science.gov (United States)

Ying, Sun; Jie, Cao; Ping, Feng; Lingjuan, Zhang

2015-06-01

To analyze the current research status of rehabilitation nursing for adult burn patients in China, and to disuss the related strategies. Chinese scientific articles on adult burn patients' rehabilitation nursing published from January 2003 to December 2013 were retrieved from 3 databases namely China Biology Medicine disc, Chinese Journals Full-text Database , and Chinese Science and Technology Journals Database . From the results retrieved, data with regard to publication year, journal distribution, research type, region of affiliation of the first author, and the main research content were collected. Data were processed with Microsoft Excel software. A total of 417 articles conforming with the criteria were retrieved. During the 11 years, the number of the relevant articles per year was on the rise, and the increasing rates in 2005, 2008, 2009, and 2013 were all above 30% . Regarding the distribution among journals, these 417 articles were published in 151 journals, with 188 articles in Source Journal for Chinese Scientific and Technical Papers , accounting for 45.08%. Regarding the research type, 173 out of the 417 articles were dealing with clinical experiences, accounting for 41.49% ; 172 out of the 417 articles were dealing with experimental studies, accounting for 41.25% . The regions of affiliation of the first author were mainly situated in Guangdong province, Shandong province, Hunan province, and Jiangsu province, with Guangdong province contributing 58 articles, accounting for 13.91%. The research content of these articles was mainly focused on psychological nursing, nursing model, and health education, respectively 188,101, and 85 articles, accounting for 45.08%, 24.22%, and 20.38%. The research on rehabilitation nursing for adult burn patients in China has been carried out nationwide. Although the number of relevant papers is on the rise, the quality of these papers needs to be further improved. There is an urgent need for the guideline on

Consensus Paper: Cerebellum and Emotion.

Science.gov (United States)

Adamaszek, M; D'Agata, F; Ferrucci, R; Habas, C; Keulen, S; Kirkby, K C; Leggio, M; Mariën, P; Molinari, M; Moulton, E; Orsi, L; Van Overwalle, F; Papadelis, C; Priori, A; Sacchetti, B; Schutter, D J; Styliadis, C; Verhoeven, J

2017-04-01

Over the past three decades, insights into the role of the cerebellum in emotional processing have substantially increased. Indeed, methodological refinements in cerebellar lesion studies and major technological advancements in the field of neuroscience are in particular responsible to an exponential growth of knowledge on the topic. It is timely to review the available data and to critically evaluate the current status of the role of the cerebellum in emotion and related domains. The main aim of this article is to present an overview of current facts and ongoing debates relating to clinical, neuroimaging, and neurophysiological findings on the role of the cerebellum in key aspects of emotion. Experts in the field of cerebellar research discuss the range of cerebellar contributions to emotion in nine topics. Topics include the role of the cerebellum in perception and recognition, forwarding and encoding of emotional information, and the experience and regulation of emotional states in relation to motor, cognitive, and social behaviors. In addition, perspectives including cerebellar involvement in emotional learning, pain, emotional aspects of speech, and neuropsychiatric aspects of the cerebellum in mood disorders are briefly discussed. Results of this consensus paper illustrate how theory and empirical research have converged to produce a composite picture of brain topography, physiology, and function that establishes the role of the cerebellum in many aspects of emotional processing.

Energies Best Paper Awards for 2015

Directory of Open Access Journals (Sweden)

Enrico Sciubba

2015-03-01

Full Text Available We are pleased to announce the Energies Best Papers awards for 2015. Energies is an open access journal of energy-related scientific research, technology development, and policy and management studies. It publishes reviews, regular research articles, and communications in a number of fields related to the procurement, conversion and final uses of energy.[...

Management of article processing charges – challenges for libraries

Directory of Open Access Journals (Sweden)

Adriana Sikora

2015-07-01

Full Text Available Dedicated funds for Open Access publishing have been a strategic instrument at German university libraries for many years. As the number of Open Access publications grows dynamically, the question arises as to whether the processes of handling article processing charges (APC are being sustainably organised among libraries and publishers so as to enable a full transition to Open Access. Max Planck Digital Library processes about 600 invoices for Open Access articles per year centrally on behalf of Max Planck researchers. This paper contains a description of the individual steps required in order to assume charges centrally as well as the barriers emerging during this process. It is shown that the main desiderata for the establishment of smooth and scalable processes are the optimisation of article submission systems, better author identification and assignment, and improved reporting.

The trend of indexed papers in PubMed covering different aspects of self-immolation.

Science.gov (United States)

Rezaeian, Mohsen

2014-01-01

Self-immolation is a fatal and devastating method of committing suicide used around the world. The chief aim of the present article is to look at the trend of indexed papers in PubMed covering different aspects of self-immolation. PubMed search engine (http://www.ncbi.nlm.nih.gov) was searched by using six keywords i.e. "self-immolation", "self-inflicted burn", "self-burning", "self-incineration", "suicidal burns" and "suicide by burning". These keywords should appear either in the title or the abstract of the articles. The time frame was set as to retrieve papers expanding from early indexing time up to end of the year 2011. Based on the search strategy 132 papers were retrieved from these total numbers; 12 (9%) were categorized as review papers; 24 (18%) as case reports and the rest 96 (73%) were original studies. It seems that the number of papers increased during the years of investigations and the highest indexed papers i.e. 14 (10.6%) belonged to the year 2011. While most journals, published only one article the highest indexed papers i.e. 35 (26.5%) belonged to Burns. There was an increasing trend in the number of self-immolation articles indexed in PubMed since 1965. Three journals i.e. Burns, Journal of Burn Care and Rehabilitation and Journal of Forensic Sciences hosted for more than 37% of all those indexed articles. However, given the increasing trend of self-immolation still more studies are needed to shed light on the diverse aspects of this appalling human behavior.

The 50 Most Cited Papers in Craniofacial Anomalies and Craniofacial Surgery.

Science.gov (United States)

Mahon, Nicola A; Joyce, Cormac W; Thomas, Sangeetha; Concannon, Elizabeth; Murray, Dylan

2015-09-01

Citation analysis is a recognized scientometric method of classifying cited articles according to the frequency of which they have been referenced. The total number of citations an article receives is considered to reflect it's significance among it's peers. Until now, a bibliometric analysis has never been performed in the specialty of craniofacial anomalies and craniofacial surgery. This citation analysis generates an extensive list of the 50 most influential papers in this developing field. Journals specializing in craniofacial surgery, maxillofacial surgery, plastic surgery, neurosurgery, genetics and pediatrics were searched to demonstrate which articles have cultivated the specialty within the past 55 years. The results show an intriguing compilation of papers which outline the fundamental knowledge of craniofacial anomalies and the developments of surgical techniques to manage these patients. This citation analysis provides a summation of the current most popular trends in craniofacial literature. These esteemed papers aid to direct our decision making today within this specialty.

The articles on atomic bomb of the newspaper in the past 15 years

International Nuclear Information System (INIS)

Ubuki, Satoru; Hayakawa, Norihiko; Matsuura, Masaaki; Hatano, Hiroko

1990-01-01

A-bomb hazards are given publicity by journalism every year from the end of the 1960s, especially in July and August, in Japan. This is generally termed 'the publication of A-bomb articles'. This paper outlines 'the publication of A-bomb articles' and introduces the actual conditions of A-bomb hazard problems. Articles were selected from three major national newspapers and two domestic newspapers (Hiroshima and Nagasaki) during the past 15 years from 1975 through 1989. Contents of the articles were divided into 20 categories and subdivided into 92 categories. According to newspaper, the Hiroshima domestic newspaper published the articles in the largest number (approximately 30% of all the articles). Overall, approximately 21% of the articles were published in August. The most common article content was A-bomb survivors' experiences, accounting for 47% before 1981 and 60% since 1982. (N.K.)

Questioning the efficacy of 'gold' open access to published articles.

Science.gov (United States)

Fredericks, Suzanne

2015-07-01

To question the efficacy of 'gold' open access to published articles. Open access is unrestricted access to academic, theoretical and research literature that is scholarly and peer-reviewed. Two models of open access exist: 'gold' and 'green'. Gold open access provides everyone with access to articles during all stages of publication, with processing charges paid by the author(s). Green open access involves placing an already published article into a repository to provide unrestricted access, with processing charges incurred by the publisher. This is a discussion paper. An exploration of the relative benefits and drawbacks of the 'gold' and 'green' open access systems. Green open access is a more economic and efficient means of granting open access to scholarly literature but a large number of researchers select gold open access journals as their first choices for manuscript submissions. This paper questions the efficacy of gold open access models and presents an examination of green open access models to encourage nurse researchers to consider this approach. In the current academic environment, with increased pressures to publish and low funding success rates, it is difficult to understand why gold open access still exists. Green open access enhances the visibility of an academic's work, as increased downloads of articles tend to lead to increased citations. Green open access is the cheaper option, as well as the most beneficial choice, for universities that want to provide unrestricted access to all literature at minimal risk.

Open Access Papers Have a Greater Citation Advantage in the Author-Pays Model

Directory of Open Access Journals (Sweden)

Elaine Sullo

2016-03-01

Full Text Available Objective – To investigate the citation performance of open access (OA and toll access (TA papers published in author-pays open access journals. Design – Longitudinal citation analysis. Setting – Publications in Springer and Elsevier’s author-pays open access journals. Subjects – 633 journals published using the author-pays model. This model encompasses both journals where the article processing charge (APC is required and journals in which authors can request open access and voluntarily pay APCs for accepted manuscripts. Methods – The authors identified APC funded journals (journals funded by mandatory author processing charges as well as those where authors voluntarily paid a fee in order to have their articles openly accessible from both Springer and Elsevier, and analyzed papers published in these journals from 2007 to 2011. The authors excluded journals that adopted the APC model later than 2007. To identify Springer titles, the authors created a search strategy to identify open access articles in SpringerLink. A total of 576 journals were identified and double checked in the Sherpa-Romeo database (a database of copyright and open access self-archiving policies of academic journals to verify their open access policies. The authors then downloaded the journal content using SpringerLink, and using Springer Author-Mapper, separated out the open access articles from the toll access articles. In order to identify the Elsevier APC funded journals, the authors referred to “Open Access Journal Directory: A-Z,” which contained 35 OA journals (p. 584. Once the authors consulted “Sponsored articles” issued by Elsevier and verified titles in Sherpa-Romeo, they identified 57 journals that fit the “author-pays” model. The bibliographic information was downloaded and OA articles were separated from TA articles. The authors confirmed that all journals were indeed OA publications by downloading the full-text from off-campus locations

Rabi N. Bhattacharya selected papers

CERN Document Server

Waymire, Edward

2016-01-01

This volume presents some of the most influential papers published by Rabi N. Bhattacharya, along with commentaries from international experts, demonstrating his knowledge, insight, and influence in the field of probability and its applications. For more than three decades, Bhattacharya has made significant contributions in areas ranging from theoretical statistics via analytical probability theory, Markov processes, and random dynamics to applied topics in statistics, economics, and geophysics. Selected reprints of Bhattacharya’s papers are divided into three sections: Modes of Approximation, Large Times for Markov Processes, and Stochastic Foundations in Applied Sciences. The accompanying articles by the contributing authors not only help to position his work in the context of other achievements, but also provide a unique assessment of the state of their individual fields, both historically and for the next generation of researchers. Rabi N. Bhattacharya: Selected Papers will be a valuable resource for yo...

Perception of the importance of chemistry research papers and comparison to citation rates.

Science.gov (United States)

Borchardt, Rachel; Moran, Cullen; Cantrill, Stuart; Chemjobber; Oh, See Arr; Hartings, Matthew R

2018-01-01

Chemistry researchers are frequently evaluated on the perceived significance of their work with the citation count as the most commonly-used metric for gauging this property. Recent studies have called for a broader evaluation of significance that includes more nuanced bibliometrics as well as altmetrics to more completely evaluate scientific research. To better understand the relationship between metrics and peer judgements of significance in chemistry, we have conducted a survey of chemists to investigate their perceptions of previously published research. Focusing on a specific issue of the Journal of the American Chemical Society published in 2003, respondents were asked to select which articles they thought best matched importance and significance given several contexts: highest number of citations, most significant (subjectively defined), most likely to share among chemists, and most likely to share with a broader audience. The answers to the survey can be summed up in several observations. The ability of respondents to predict the citation counts of established research is markedly lower than the ability of those counts to be predicted by the h-index of the corresponding author of each article. This observation is conserved even when only considering responses from chemists whose expertise falls within the subdiscipline that best describes the work performed in an article. Respondents view both cited papers and significant papers differently than papers that should be shared with chemists. We conclude from our results that peer judgements of importance and significance differ from metrics-based measurements, and that chemists should work with bibliometricians to develop metrics that better capture the nuance of opinions on the importance of a given piece of research.

Evaluation of Scientific Journal Validity, It's Articles and Their Authors.

Science.gov (United States)

Masic, Izet; Begic, Edin

2016-01-01

The science that deals with evaluation of a scientific article refer to the finding quantitative indicators (index) of the scientific research success is called scientometrics. Scientometrics is part of scientology (the science of science) that analyzes scientific papers and their citations in a selected sample of scientific journals. There are four indexes by which it is possible to measure the validity of scientific research: number of articles, impact factor of the journal, the number and order of authors and citations number. Every scientific article is a record of the data written by the rules recommended by several scientific associations and committees. Growing number of authors and lot of authors with same name and surname led to the introduction of the necessary identification agent - ORCID number.

Visualizing Article Similarities via Sparsified Article Network and Map Projection for Systematic Reviews.

Science.gov (United States)

Ji, Xiaonan; Machiraju, Raghu; Ritter, Alan; Yen, Po-Yin

2017-01-01

Systematic Reviews (SRs) of biomedical literature summarize evidence from high-quality studies to inform clinical decisions, but are time and labor intensive due to the large number of article collections. Article similarities established from textual features have been shown to assist in the identification of relevant articles, thus facilitating the article screening process efficiently. In this study, we visualized article similarities to extend its utilization in practical settings for SR researchers, aiming to promote human comprehension of article distributions and hidden patterns. To prompt an effective visualization in an interpretable, intuitive, and scalable way, we implemented a graph-based network visualization with three network sparsification approaches and a distance-based map projection via dimensionality reduction. We evaluated and compared three network sparsification approaches and the visualization types (article network vs. article map). We demonstrated the effectiveness in revealing article distribution and exhibiting clustering patterns of relevant articles with practical meanings for SRs.

Methodological reporting in qualitative, quantitative, and mixed methods health services research articles.

Science.gov (United States)

Wisdom, Jennifer P; Cavaleri, Mary A; Onwuegbuzie, Anthony J; Green, Carla A

2012-04-01

Methodologically sound mixed methods research can improve our understanding of health services by providing a more comprehensive picture of health services than either method can alone. This study describes the frequency of mixed methods in published health services research and compares the presence of methodological components indicative of rigorous approaches across mixed methods, qualitative, and quantitative articles. All empirical articles (n = 1,651) published between 2003 and 2007 from four top-ranked health services journals. All mixed methods articles (n = 47) and random samples of qualitative and quantitative articles were evaluated to identify reporting of key components indicating rigor for each method, based on accepted standards for evaluating the quality of research reports (e.g., use of p-values in quantitative reports, description of context in qualitative reports, and integration in mixed method reports). We used chi-square tests to evaluate differences between article types for each component. Mixed methods articles comprised 2.85 percent (n = 47) of empirical articles, quantitative articles 90.98 percent (n = 1,502), and qualitative articles 6.18 percent (n = 102). There was a statistically significant difference (χ(2) (1) = 12.20, p = .0005, Cramer's V = 0.09, odds ratio = 1.49 [95% confidence interval = 1,27, 1.74]) in the proportion of quantitative methodological components present in mixed methods compared to quantitative papers (21.94 versus 47.07 percent, respectively) but no statistically significant difference (χ(2) (1) = 0.02, p = .89, Cramer's V = 0.01) in the proportion of qualitative methodological components in mixed methods compared to qualitative papers (21.34 versus 25.47 percent, respectively). Few published health services research articles use mixed methods. The frequency of key methodological components is variable. Suggestions are provided to increase the transparency of mixed methods studies and

Curated Collections for Educators: Five Key Papers on Evaluating Digital Scholarship.

Science.gov (United States)

Quinn, Antonia; Chan, Teresa M; Sampson, Christopher; Grossman, Catherine; Butts, Christine; Casey, John; Caretta-Weyer, Holly; Gottlieb, Michael

2018-01-03

Traditionally, scholarship that was recognized for promotion and tenure consisted of clinical research, bench research, and grant funding. Recent trends have allowed for differing approaches to scholarship, including digital publication. As increasing numbers of trainees and faculty turn to online educational resources, it is imperative to critically evaluate these resources. This article summarizes five key papers that address the appraisal of digital scholarship and describes their relevance to junior clinician educators and faculty developers. In May 2017, the Academic Life in Emergency Medicine Faculty Incubator program focused on the topic of digital scholarship, providing and discussing papers relevant to the topic. We augmented this list of papers with further suggestions by guest experts and by an open call via Twitter for other important papers. Through this process, we created a list of 38 papers in total on the topic of evaluating digital scholarship. In order to determine which of these papers best describe how to evaluate digital scholarship, the authorship group assessed the papers using a modified Delphi approach to build consensus. In this paper we present the five most highly rated papers from our process about evaluating digital scholarship. We summarize each paper and discuss its specific relevance to junior faculty members and to faculty developers. These papers provide a framework for assessing the quality of digital scholarship, so that junior faculty can recommend high-quality educational resources to their trainees. These papers help guide educators on how to produce high quality digital scholarship and maximize recognition and credit in respect to receiving promotion and tenure.

Building the Foundation the WRITE WAY: Mini-Lessons with Practical Strategies for Teaching the Personal Narrative, Feature Article, "How-to..." Article, and Persuasive Letter.

Science.gov (United States)

Miller, Susan A.; Vincent, Donna

This book presents strategies for teaching the personal narrative, feature article, how-to article, and persuasive letter, and for teaching fiction and reflective thinking and writing. It includes definitions, lesson plans, originals for transparencies and photocopies, and sample student writing. The first four sections are: Teaching the Personal…

Paper and Cardboard Packaging Ecodesing and Innovative Life Cycle Solutions

OpenAIRE

Koklacova, Sabine; Atstaja, Dzintra

2012-01-01

This paper discusses the findings of the research project, which explored paper and cardboard packaging ecodesign and innovative life cycle solutions in Latvia. The present article focuses on theoretical background of ecodesign that is aligned to packaging in order to create universal model and guidelines for its implementation in Latvia. The mixed research method has been used in this paper - interviews, document analysis, modelling and surveys. Ecodesign of paper and cardboard packaging in ...

Research Article Special Issue

African Journals Online (AJOL)

pc

2017-10-05

Oct 5, 2017 ... image processing. Detail explanations including experimental results that show the effectiveness of the proposed techniques are described in this paper. The proposed algorithm has been successfully detect and separate agglomerate RBC with 96% accuracy. Algorithm validation was verified with RBC ...

Method of forming an HTS article

Science.gov (United States)

Bhattacharya, Raghu N.; Zhang, Xun; Selvamanickam, Venkat

2014-08-19

A method of forming a superconducting article includes providing a substrate tape, forming a superconducting layer overlying the substrate tape, and depositing a capping layer overlying the superconducting layer. The capping layer includes a noble metal and has a thickness not greater than about 1.0 micron. The method further includes electrodepositing a stabilizer layer overlying the capping layer using a solution that is non-reactive to the superconducting layer. The superconducting layer has an as-formed critical current I.sub.C(AF) and a post-stabilized critical current I.sub.C(PS). The I.sub.C(PS) is at least about 95% of the I.sub.C(AF).

[Bibliometric analysis of scientific articles on epidemiological study of burns in China].

Science.gov (United States)

Cheng, W F; Shen, Z A; Zhao, D X; Li, D W; Shang, Y R

2017-04-20

Objective: To analyze the current status of epidemiological study of burns in China, and to explore the related strategies. Methods: Retrospective or cross-sectional scientific articles in Chinese or English on epidemiological study of burns in China published from January 2005 to December 2015 were systemically retrieved from 4 databases. The databases include PubMed, Embase, China Biology Medicine disc, and Chinese Journals Full - text Database . From the results retrieved, data with regard to publication year, journal distribution, number of institutions participated in the study, affiliation of the first author and its location, and admission time span and age of patients in all the scientific articles were collected. Furthermore, the definition of age range and the grouping method of age of pediatric patients in English articles on epidemiological study of pediatric burns of China were recorded. Data were processed with descriptive statistical analysis. Results: A total of 256 scientific articles conforming to the study criteria were retrieved, among which 214 (83.59%) articles were in Chinese, and 42 (16.41%) articles were in English; 242 (94.53%) articles were retrospective studies, and 14 (5.47%) articles were cross-sectional studies. During the 11 years, the number of the relevant articles was fluctuant on the whole. The scientific articles were published in 130 journals, with 42 English articles in source journals for SCIENCE CITATION INDEX EXPANDED - JOURNAL LIST, accounting for 16.41%, and 116 Chinese articles in Source Journal for Chinese Scientific and Technical Papers, accounting for 45.31%. Totally 215 (83.98%) articles were single-center studies, and 29 (11.33%) articles were multicenter studies which were conducted by three or more centers. The number of affiliations of the first author of articles was 161 in total. The top 10 institutions regarding the article publishing number published 58 articles, accounting for 22.66%. Scientific articles on

Assessing Approaches to Teaching Systems Thinking: Reading Article vs. Game Play

Science.gov (United States)

Pfirman, S. L.; O'Garra, T.; Lee, J.; Bachrach, E.; Bachman, G.; Orlove, B. S.

2016-12-01

Problem-solving in the complex domain of climate change requires consideration of the dynamics of systems as wholes. The long time frame, coupled with multiple interacting elements is challenging to teach through traditionally linear approaches, such as lectures or reading. On the other hand some have claimed that games are potentially useful in teaching system skills, due to their iterative, interacting, and problem solving character. In this experiment, we evaluated the impact of the EcoChains: Arctic Crisis card game on participants' mental models using a `fuzzy cognitive mapping' approach. The study population included 41 participants randomly assigned to the treatment/game play n=21 and the control/reading illustrated article: n=20. To obtain cognitive maps from participants, the first step was explaining how to draw a map, using an unrelated map as an example. Following the explanation, participants were handed large sheets of paper and asked to write down all the concepts they could think of related to: Arctic marine & sea-ice ecosystems, including the species & inhabitants of these ecosystems, all the different factors that negatively affect the health of Arctic marine & sea-ice ecosystems, its species & inhabitants, all the different factors that positively affect the health of Arctic marine & sea-ice ecosystems, its species & inhabitants. Once participants had drafted their list of concepts, they were asked to construct maps with the concepts in the center followed by arrows drawn between them to represent the direction of relationships between concepts. After the intervention - either playing the EcoChains card game or reading the illustrated article - participants were handed back their maps, together with a different colored pencil from the one they used previously, and asked to adjust the maps based on what they had learned from playing Ecochains/reading the article. Results indicate that both playing EcoChains and reading an illustrated article with

Do Women Publish Fewer Journal Articles than Men? Sex Differences in Publication Productivity in the Social Sciences

Science.gov (United States)

Bird, Karen Schucan

2011-01-01

This paper examines whether women and men publish journal articles at a level comparable with their representation within the social sciences. The paper also explores sex differences in patterns of single authorship and co-authorship. To do so, demographic data of the UK social sciences is compared with a sample of UK-authored journal articles.…

A two-dimensional model of the pressing section of a paper machine including dynamic capillary effects

KAUST Repository

Iliev, Oleg P.; Printsypar, Galina; Rief, Stefan

2013-01-01

is developed to account for the water flow within the pressing zone. A Richards-type equation is used to describe the flow in the unsaturated zone. The dynamic capillary pressure-saturation relation is adopted for the paper production process. The mathematical

Essential Tips for Writing Literature Review Papers in Educational Psychology

Directory of Open Access Journals (Sweden)

Carlos E. Zerpa

2014-12-01

Full Text Available This paper briefl y presents some basic ideas on how to organize and write review papers for scientifi c journals. Prescriptions are derived from Publication Manual-APA, as well as precise indications from a famous editor of a prestigious publication (Daryl Bem along with an expert in research methods (José Galván. Moreover, some common errors when writing an article are presented; at last, an integration of the different text composition stages with some self regulation strategies is proposed, as a possible guide to orientate the strategic activity used by the authors when approaching the process of writing a review article in Education and Psychology.

Review article: Methodology for the 'rapid review' series on musculoskeletal injuries in the emergency department.

Science.gov (United States)

Strudwick, Kirsten; McPhee, Megan; Bell, Anthony; Martin-Khan, Melinda; Russell, Trevor

2018-02-01

Musculoskeletal injuries are a common presentation to the ED, with significant costs involved in the management of these injuries, variances in care within the ED and associated morbidity. A series of rapid review papers were completed to guide best practice for the assessment and management of common musculoskeletal injuries presenting to the ED. This paper presents the methodology used across the rapid reviews. PubMed, CINAHL, EMBASE, TRIP and the grey literature, including relevant organisational websites, were searched in 2015. The search was repeated consistently for each topic area (injuries of the foot and ankle, knee, hand and wrist, elbow, shoulder, lumbar spine and cervical spine). English-language primary studies, systematic reviews and guidelines that were published in the last 10 years and addressed acute musculoskeletal injury management were considered for inclusion. Data extraction of each included article was conducted, followed by a quality appraisal. The extracted data from each article was synthesised to group similar evidence together. For each rapid review, the evidence has been organised in a way that a clinician can direct their attention to a specific component of the clinical cycle of care in the ED, such as the assessment, diagnostic tests, management and follow-up considerations from ED. The series of rapid reviews are designed to foster evidence-based practice within the ED, targeting the injuries most commonly presenting. The reviews provide clinicians in EDs with rapid access to the best current evidence, which has been synthesised and organised to assist decision-making. © 2017 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Method for production of carbon nanofiber mat or carbon paper

Science.gov (United States)

Naskar, Amit K.

2015-08-04

Method for the preparation of a non-woven mat or paper made of carbon fibers, the method comprising carbonizing a non-woven mat or paper preform (precursor) comprised of a plurality of bonded sulfonated polyolefin fibers to produce said non-woven mat or paper made of carbon fibers. The preforms and resulting non-woven mat or paper made of carbon fiber, as well as articles and devices containing them, and methods for their use, are also described.

Neutron absorbing article and method for manufacture thereof

International Nuclear Information System (INIS)

Forsyth, P.F.; Mcmurtry, C.H.; Naum, R.G.

1980-01-01

A composite, neutron absorbing, coated article, suitable for installation in storage racks for spent nuclear fuel and for other neutron absorbing applications, includes a backing member, preferably of flexible material such as woven fiberglass cloth, a synthetic organic polymeric coating or a plurality of such coatings on the backing member, preferably of cured phenolic resin, such as phenol formaldehyde or trimethylolphenol formaldehyde and boron carbide particles held to the backing member by the cured coating or a plurality of such coatings. Also within the invention is a method for the manufacture of the neutron absorbing coated article and the use of such an article. In a preferred method the backing member is first coated on both sides thereof with a filling coating of thermosettable liquid phenolic resin, which is then partially cured to solid state, one side of the backing member is then coated with a mixture of thermosettable liquid resin and finely divided boron carbide particles and the resin is partially cured to solid state, the other side is coated with a similar mixture, larger boron carbide particles are applied to it and the resin is partially cured to solid state, such side of the article is coated with thermosettable liquid phenolic resin, the resin is partially cured to solid state and such resin, including previously applied partially cured resins, is cured to final cross-linked and permanently set form

The 100 most-cited articles in the imaging literature.

Science.gov (United States)

Brinjikji, Waleed; Klunder, Alexa; Kallmes, David F

2013-10-01

To characterize the 100 most-cited articles in medical imaging. The Scopus database was searched for citations to articles published in any of the 116 journals in the subject category "radiology, nuclear medicine, and medical imaging" at the Institute of Science Information Web of Science that the authors termed "imaging literature." Using the Scopus database, two authors searched electronic and print versions of these journals to determine the 100 most-cited articles. The following data were collected for each article: journal name, journal impact factor, number of authors, publication year, country in which the study was performed, department of all authors, article type, imaging modality, grant funding, and clinical subspecialty. Statistical and/or mathematic, magnetic resonance (MR) imaging technique, image processing and/or analysis and computer science, new imaging technique, and basic science articles were considered "preclinical." Using the Pearson correlation coefficient, the authors examined the relationship between journal impact factor and the number of top 100 cited articles included in the list. Most studies were classified as preclinical (n = 75). Fifty-eight of the 100 articles were neuroradiology articles. NeuroImage had the most highly cited articles (n = 22). MR imaging was the most commonly studied imaging modality (n = 69). The authors of 51 articles were from radiology departments. Most articles were published from 1990 to the present (n = 87). There was a statistically significant positive correlation between journal impact factor and the number of top 100 cited articles (r = 0.46, P < .001). Preclinical articles, primarily in the field of neurologic MR imaging, were highly represented in the top 100 cited articles in the medical imaging literature. © RSNA, 2013.

An Analysis of the Top-cited Articles in Emergency Medicine Education Literature.

Science.gov (United States)

Munzer, Brendan W; Love, Jeffery; Shipman, Barbara L; Byrne, Brendan; Cico, Stephen J; Furlong, Robert; Khandelwal, Sorabh; Santen, Sally A

2017-01-01

Dissemination of educational research is critical to improving medical education, promotion of faculty and ultimately patient care. The objective of this study was to identify the top 25 cited education articles in the emergency medicine (EM) literature and the top 25 cited EM education articles in all journals, as well as report on the characteristics of the articles. Two searches were conducted in the Web of Science in June 2016 using a list of education-related search terms. We searched 19 EM journals for education articles as well as all other literature for EM education-related articles. Articles identified were reviewed for citation count, article type, journal, authors, and publication year. With regards to EM journals, the greatest number of articles were classified as articles/reviews, followed by research articles on topics such as deliberate practice (cited 266 times) and cognitive errors (cited 201 times). In contrast in the non-EM journals, research articles were predominant. Both searches found several simulation and ultrasound articles to be included. The most common EM journal was Academic Emergency Medicine (n = 18), and Academic Medicine was the most common non-EM journal (n=5). A reasonable number of articles included external funding sources (6 EM articles and 13 non-EM articles.). This study identified the most frequently cited medical education articles in the field of EM education, published in EM journals as well as all other journals indexed in Web of Science. The results identify impactful articles to medical education, providing a resource to educators while identifying trends that may be used to guide EM educational research and publishing efforts.

Identifying Anomalous Citations for Objective Evaluation of Scholarly Article Impact.

Directory of Open Access Journals (Sweden)

Xiaomei Bai

Full Text Available Evaluating the impact of a scholarly article is of great significance and has attracted great attentions. Although citation-based evaluation approaches have been widely used, these approaches face limitations e.g. in identifying anomalous citations patterns. This negligence would inevitably cause unfairness and inaccuracy to the article impact evaluation. In this study, in order to discover the anomalous citations and ensure the fairness and accuracy of research outcome evaluation, we investigate the citation relationships between articles using the following factors: collaboration times, the time span of collaboration, citing times and the time span of citing to weaken the relationship of Conflict of Interest (COI in the citation network. Meanwhile, we study a special kind of COI, namely suspected COI relationship. Based on the COI relationship, we further bring forward the COIRank algorithm, an innovative scheme for accurately assessing the impact of an article. Our method distinguishes the citation strength, and utilizes PageRank and HITS algorithms to rank scholarly articles comprehensively. The experiments are conducted on the American Physical Society (APS dataset. We find that about 80.88% articles contain contributed citations by co-authors in 26,366 articles and 75.55% articles among these articles are cited by the authors belonging to the same affiliation, indicating COI and suspected COI should not be ignored for evaluating impact of scientific papers objectively. Moreover, our experimental results demonstrate COIRank algorithm significantly outperforms the state-of-art solutions. The validity of our approach is verified by using the probability of Recommendation Intensity.

Identifying Anomalous Citations for Objective Evaluation of Scholarly Article Impact.

Science.gov (United States)

Bai, Xiaomei; Xia, Feng; Lee, Ivan; Zhang, Jun; Ning, Zhaolong

2016-01-01

Evaluating the impact of a scholarly article is of great significance and has attracted great attentions. Although citation-based evaluation approaches have been widely used, these approaches face limitations e.g. in identifying anomalous citations patterns. This negligence would inevitably cause unfairness and inaccuracy to the article impact evaluation. In this study, in order to discover the anomalous citations and ensure the fairness and accuracy of research outcome evaluation, we investigate the citation relationships between articles using the following factors: collaboration times, the time span of collaboration, citing times and the time span of citing to weaken the relationship of Conflict of Interest (COI) in the citation network. Meanwhile, we study a special kind of COI, namely suspected COI relationship. Based on the COI relationship, we further bring forward the COIRank algorithm, an innovative scheme for accurately assessing the impact of an article. Our method distinguishes the citation strength, and utilizes PageRank and HITS algorithms to rank scholarly articles comprehensively. The experiments are conducted on the American Physical Society (APS) dataset. We find that about 80.88% articles contain contributed citations by co-authors in 26,366 articles and 75.55% articles among these articles are cited by the authors belonging to the same affiliation, indicating COI and suspected COI should not be ignored for evaluating impact of scientific papers objectively. Moreover, our experimental results demonstrate COIRank algorithm significantly outperforms the state-of-art solutions. The validity of our approach is verified by using the probability of Recommendation Intensity.

Using Informal Articles in Extensive Reading (ER Program: A Personal Experience

Directory of Open Access Journals (Sweden)

Chothibul Umam

2015-12-01

Full Text Available In this digital age, informal articles which contain some valuable informations and extensive input to develop the learners’ language proficiency are easily found on internet or other reading sources. Unfortunately most literature shows that informal articles are not widely used in extensive reading (henceforth ER program. For this reason, the paper introduces steps procedure in using informal articles as authentic material in one semester ER program for Indonesian EFL college learners. The procedure is developed on the basis of my great interest in creating innovative way in teaching ER at one of the State Institute for Islamic Studies in Indonesia. The proposed steps are expected to be an alternative pathway in teaching ER for English teachers particularly at a college-university level. Keywords: Extensive Reading, informal article.Copyright © 2015 by Al-Ta'lim All right reserved

Physiotherapy for Women with Stress Urinary Incontinence: A Review Article

Science.gov (United States)

Ghaderi, Fariba; Oskouei, Ali E.

2014-01-01

[Purpose] This review article is designed to expose physiotherapists to a physiotherapy assessment of stress urinary incontinence (SUI) and the treatment and possibly preventive roles that they might play for women with SUI. Specifically, the goal of this article is to provide an understanding of pelvic floor muscle function and the implications that this function has for physiotherapy treatment by reviewing articles published in this area. [Methods] A range of databases was searched to identify articles that address physiotherapy for SUI, including the Cochrane Library, Medline, and CINAHL. [Results] According to the articles identified in our databases research, greater improvements in SUI occur when women receive a supervised exercise program of at least three months. The effectiveness of physiotherapy treatment is increased if the exercise program is based on some principles, such as intensity, duration, resembling functional task, and the position in which the exercise for pelvic floor muscles is performed. Biofeedback and electrical stimulation may also be clinically useful and acceptable modalities for some women with SUI. [Conclusion] We concluded that the plan for physiotherapy care should be individualized for each patient and include standard physiotherapy interventions. PMID:25276044

9 CFR 93.208 - Articles accompanying poultry.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Articles accompanying poultry. 93.208... AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS IMPORTATION OF CERTAIN ANIMALS, BIRDS, FISH, AND POULTRY, AND CERTAIN ANIMAL, BIRD, AND POULTRY PRODUCTS; REQUIREMENTS...

Top 100 Cited Classic Articles in Breast Cancer Research.

Science.gov (United States)

Uysal, Erdal

2017-07-01

This study aimed to analyze 100 most cited articles in breast cancer research. The data in this study were obtained by a search conducted on the Web of Science (WOS). In brief, the term "breast cancer" was typed in the search box of WOS basic research including all the years and the data. The analysis was carried out by compiling the top 100 cited articles in the shortlist as sorted by the journals, categories of the studies, the countries, the centers, the authors and the publication date. No statistical methods were used in the study. All data were reported as percentages, numbers and bar charts on tables. Our findings showed that the most frequently cited article received 7609 citations to date. Most articles were published in the New England Journal of Medicine. 81% of the studies originated from the USA. The National Institutes of Health (NIH USA) was ranked the first with 21% and it was followed by Harvard University in terms of number of published articles. 42% of the articles were published under the category of medicine and general internal medicine. Top 100 most cited articles originated from the United States. The highest number of articles among the top 100 articles were published in New England Journal of Medicine and National Institutes of Health NIH USA was the leading institutes published the most articles.

Definition of chronic kidney disease and measurement of kidney function in original research papers: a review of the literature.

Science.gov (United States)

Anderson, Jocelyn; Glynn, Liam G

2011-09-01

Over the past decade, chronic kidney disease (CKD) has become an area of intensive clinical and epidemiological research. Despite the clarity provided by the Kidney Disease Outcomes Quality Initiative (KDOQI) guidelines, there appears to be within the CKD research literature significant disagreement on how to define CKD and measure kidney function. The objectives of this study were to investigate the variety of methods used to define CKD and to measure kidney function in original research papers as well as to investigate whether the quality of the journal had any effect on the quality of the methodology used. This was a descriptive review and not a meta-analysis. Information was extracted from each article including publication details (including the journal's impact factor), definition of CKD, method used to estimate kidney function and quantity of serum creatinine readings used to define CKD. An electronic search of MEDLINE through OVID was completed using the search term CKD. The search was limited to articles in English published in 2009. Studies were included in the review only if they were original research articles including patients with CKD. Articles were excluded if they reported data from a paediatric population, a population solely on dialysis or if there was no full-text access through OVID. Each article was assessed for quality with respect to using KDOQI CKD definition criteria. A description of the pooled data was completed and chi-square tests were used to investigate the relation between article quality and journal quality. Analysis was carried out using SPSS (15.0) and a P-value of definitions are being used in original research articles to define CKD and measure kidney function which calls into question the validity and reliability of such research findings and associated clinical guidelines. International consensus is urgently required to improve validity and generalizability of CKD research findings.

Knee Society Award Papers Are Highly Cited Works.

Science.gov (United States)

Mroz, Tommy P; Clarke, Henry D; Chang, Yu-Hui H; Scuderi, Giles R

2016-01-01

Since 1993, The Knee Society has presented three annual awards recognizing the best research papers presented at the annual meetings. To date, no quantitative evaluation has determined whether the selection process identifies the most meritorious papers based on subsequent citations. In the absence of validation of this process, it is unclear whether the journal readership should view the award-winning papers as those with potentially greater impact for the specialty. (1) Are award papers cited both more than nonaward papers published in the same Knee Society proceedings issue of CORR(®) and more than all other knee research papers published in all issues of CORR(®) during any given year? (2) Does the award selection process identify potentially highly influential knee research? Subsequent citations for each award and nonaward paper published in The Knee Society proceedings issue for 2002 to 2008 were determined using the SCOPUS citation index. The citations for all papers on knee surgery published in CORR(®) during the same years were also determined. Mean citations for an award paper were statistically greater than for a nonaward paper: 86 (SD 95; median 55; 95% confidence interval [CI] of the mean, 44-128) versus 33 (SD 30; median 24; 95% CI of the mean, 28-37; p papers was also higher than for all other knee research papers published in nonproceedings issues of CORR(®): 86 (SD 95; median 55; 95% CI of the mean, 44-128) versus 30 (SD 31; median 20; 95% CI for the mean, 25-35; p papers were in the top five cited papers from the proceedings issue for the respective year versus 24 of the 190 (12.6%) of the nonaward papers (difference in the percentages is 41.9% and the 95% CI for the risk difference is 20.6%-63.3%; p paper was the most cited knee paper published in CORR(®). The selection process for The Knee Society scientific awards identifies potentially influential papers that are likely to be highly cited in future research articles about the knee. The

Hedging in Popular Scientific Articles on Medicine

Directory of Open Access Journals (Sweden)

Csongor Alexandra

2013-04-01

Full Text Available Introduction: The aim of this study is to investigate the process of rewriting medical research papers for the lay public. The latest findings of medical research often appear in the popular media. It is interesting to see what happens to a scientific text when it is transmitted to a new audience. Hedging is usually interpreted as a characteristic feature of scientific discourse. This study focuses on hedging, which also tends to be applied in popularized articles in the field of medicine.

[The 100 Most Often Articles on Glaucoma Research: a Bibliometric Analysis].

Science.gov (United States)

Frings, Andreas; Kromer, Robert; Ueberschaar, Julian; Druchkiv, Vasyl; Schargus, Marc

2017-10-25

Background Bibliometric science employs statistical and quantitative analyses to analyse the scholarly impact and characteristics of publications within a research field. The present study was initiated to analyse and quantify the 100 most often cited papers in glaucoma research. Materials and Methods The databases of the Institute for Scientific Information were utilised for the identification of articles published from 1900 to December 2016. All glaucoma articles were identified that had been published in 109 relevant journals and which had been cited at least 200 times. The top 100 articles were selected for further analysis of authorship, source journal, number of citations, citation rate, geographic origin, article type, and level of evidence. Results The publication dates of the 100 most often cited articles ranged from 1966 to 2011, with the greatest number of articles published in the 1990s. Citations per article ranged from 258 to 1908. All articles were published in 18 of the 109 journals. The leading countries of origin were the U. S. A., followed by the U. K. The study focussed on two main clinical articles (diagnostics; epidemiology) and basic research articles. The number of citations per article was greatest for articles published in the 2000s. Most articles provided level III evidence, followed by levels I and II. Conclusion The majority of the most cited articles were published in three of the top-ranked journals. Most clinical articles dealt with epidemiology and diagnostics. Individuals who authored multiple articles in the list often focussed on one of these two areas. Most studies were conducted in the U. S. A. and presented level III clinical outcomes. This indicates that even studies with small case series or cohort studies can attract attention. Georg Thieme Verlag KG Stuttgart · New York.

Distribution of Citations Received by Scientific Papers Published in the Imaging Literature From 2001 to 2010: Decreasing Inequality and Polarization.

Science.gov (United States)

Yoon, Soo Jeong; Yoon, Dae Young; Lee, Hyung Jin; Baek, Sora; Lim, Kyoung Ja; Seo, Young Lan; Yun, Eun Joo

2017-08-01

The objective of this study was to assess the distribution of citations received by scientific papers published in the imaging literature between 2001 and 2010. We extracted the number of citations of all articles and reviews for 5 years after publication using the Scopus (Elsevier) citation database of imaging journals between 2001 and 2010. We quantitatively analyzed article and review citations from each journal and each year, including the number, proportion, and annual number of citations of the most- (≥ 20 citations) and least-cited (three or fewer citations) papers; ratio of most-cited to least-cited papers; 75/25 percentile citation ratio; 90/10 percentile citation ratio; Gini coefficient; and Kolkata index. Our analysis of 124,331 articles and 13,575 reviews from 121 journals showed that the proportion of most-cited articles (from 19.6% to 27.1%) and reviews (from 19.1% to 37.2%) increased from 2001 to 2010, whereas the proportion of least-cited articles (from 32.3% to 23.0%) and reviews (from 31.9% to 15.8%) declined over the same period. The annual numbers of citations of most-cited articles and reviews both reached a peak in the fourth year after publication, whereas those of least-cited articles and reviews reached a peak in the second and fist years, respectively, after publication and thereafter decreased. The 75/25 percentile ratio for articles declined from 41.1 to 27.5 between 2001 and 2010. Over the same time, the 75/25 percentile ratio for reviews declined from 47.4 to 22.9. The 90/10 percentile ratio for articles declined from 1730.8 to 188.7; for reviews, the 90/10 percentile ratio declined from 5788.0 to 100.7. The Gini coefficient of articles and reviews also declined from 0.6116 to 0.5721 for articles and from 0.6507 to 0.5649 for reviews; the k index, from 0.7260 to 0.7088 for articles from 0.7409 to 0.7072 for reviews. Inequality and polarization of citations consistently decreased in the imaging literature from 2001 to 2010.

Journal Articles Applying National Aquatic Resource Survey Data

Science.gov (United States)

The National Aquatic Resource Surveys (NARS) data are being used and applied above and beyond the regional and national assessments. This page includes a list of recent journal articles that reference NARS data.

UKPMC: a full text article resource for the life sciences.

Science.gov (United States)

McEntyre, Johanna R; Ananiadou, Sophia; Andrews, Stephen; Black, William J; Boulderstone, Richard; Buttery, Paula; Chaplin, David; Chevuru, Sandeepreddy; Cobley, Norman; Coleman, Lee-Ann; Davey, Paul; Gupta, Bharti; Haji-Gholam, Lesley; Hawkins, Craig; Horne, Alan; Hubbard, Simon J; Kim, Jee-Hyub; Lewin, Ian; Lyte, Vic; MacIntyre, Ross; Mansoor, Sami; Mason, Linda; McNaught, John; Newbold, Elizabeth; Nobata, Chikashi; Ong, Ernest; Pillai, Sharmila; Rebholz-Schuhmann, Dietrich; Rosie, Heather; Rowbotham, Rob; Rupp, C J; Stoehr, Peter; Vaughan, Philip

2011-01-01

UK PubMed Central (UKPMC) is a full-text article database that extends the functionality of the original PubMed Central (PMC) repository. The UKPMC project was launched as the first 'mirror' site to PMC, which in analogy to the International Nucleotide Sequence Database Collaboration, aims to provide international preservation of the open and free-access biomedical literature. UKPMC (http://ukpmc.ac.uk) has undergone considerable development since its inception in 2007 and now includes both a UKPMC and PubMed search, as well as access to other records such as Agricola, Patents and recent biomedical theses. UKPMC also differs from PubMed/PMC in that the full text and abstract information can be searched in an integrated manner from one input box. Furthermore, UKPMC contains 'Cited By' information as an alternative way to navigate the literature and has incorporated text-mining approaches to semantically enrich content and integrate it with related database resources. Finally, UKPMC also offers added-value services (UKPMC+) that enable grantees to deposit manuscripts, link papers to grants, publish online portfolios and view citation information on their papers. Here we describe UKPMC and clarify the relationship between PMC and UKPMC, providing historical context and future directions, 10 years on from when PMC was first launched.

Challenging Google, Microsoft Unveils a Search Tool for Scholarly Articles

Science.gov (United States)

Carlson, Scott

2006-01-01

Microsoft has introduced a new search tool to help people find scholarly articles online. The service, which includes journal articles from prominent academic societies and publishers, puts Microsoft in direct competition with Google Scholar. The new free search tool, which should work on most Web browsers, is called Windows Live Academic Search…

Publication practices and responsible authorship: a review article

Directory of Open Access Journals (Sweden)

Elvis E. Tarkang

2017-06-01

Full Text Available Dissemination of research findings through the publication of one’s work or a group of contributors is an important part of the research process, as this allows the passing on of benefits to a much wider community. In whatever evocative form this dissemination may take, the onus lies on the author(s to ensure adherence to the code of ethics as it pertains to the integrity of the information being put out. We publish because we want our findings to be adapted into practice and application, or in some cases may be relevant to policy makers in decision-making. To a large extent in the field of academia, successful publication improves opportunities for academic funding and promotion whilst enhancing scientific and scholarly achievement and repute. A situation may be compromised where intellectual contributions to a scientific investigation do not adhere to the four key guidelines of scholarship, authorship, approval and agreement as well as the protocols of ensuring good publication ethics. The objective of this review is to lay emphasis on universal standards for manuscript authorship and to fostering good practices. This in our view will bring authorship credit and accountability to the attention of our colleagues and readers at large. To achieve this, a systematic and critical review of the literature was undertaken. Electronic databases, academic journals and books from various sources were accessed. Several key search terms relating to responsible authorship, common authorship malpractices, conflict of interest, universal publication guidelines and other authorship related issues, were used. Only references deemed useful from relevant texts and journal articles were included. In this paper, the authors have sought to highlight the pitfalls researchers sometimes entangle themselves within an act of compromise thereby impinging on the ethical and professional responsibilities for the content of a paper under consideration. This article

Summary of papers included within this commemorative issue

Czech Academy of Sciences Publication Activity Database

Roček, Zbyněk

2016-01-01

Roč. 72, 1/2 (2016), s. 15-16 ISSN 2533-4050 Institutional support: RVO:67985831 Keywords : paleontology * summmary Subject RIV: DB - Geology ; Mineralogy http://www.nm.cz/publikace/archiv-en.php?id=4&rok=72&kcislu=1-2&f_=Show

Externalities and article citations: experience of a national public health journal (Gaceta Sanitaria).

Science.gov (United States)

Ruano-Ravina, Alberto; Álvarez-Dardet, Carlos; Domínguez-Berjón, M Felicitas; Fernández, Esteve; García, Ana M; Borrell, Carme

2016-01-01

The purpose of the study was to analyze the determinants of citations such as publication year, article type, article topic, article selected for a press release, number of articles previously published by the corresponding author, and publication language in a Spanish journal of public health. Observational study including all articles published in Gaceta Sanitaria during 2007-2011. We retrieved the number of citations from the ISI Web of Knowledge database in June 2013 and also information on other variables such as number of articles published by the corresponding author in the previous 5 years (searched through PubMed), selection for a press release, publication language, article type and topic, and others. We included 542 articles. Of these, 62.5% were cited in the period considered. We observed an increased odds ratio of citations for articles selected for a press release and also with the number of articles published previously by the corresponding author. Articles published in English do not seem to increase their citations. Certain externalities such as number of articles published by the corresponding author and being selected for a press release seem to influence the number of citations in national journals. Copyright © 2016 Elsevier Inc. All rights reserved.

New Technique for Cryogenically Cooling Small Test Articles

Science.gov (United States)

Rodriquez, Karen M.; Henderson, Donald J.

2011-01-01

Convective heat removal techniques to rapidly cool small test articles to Earth-Moon L2 temperatures of 77 K were accomplished through the use of liquid nitrogen (LN2). By maintaining a selected pressure range on the saturation curve, test articles were cooled below the LN2 boiling point at ambient pressure in less than 30 min. Difficulties in achieving test pressures while maintaining the temperature tolerance necessitated a modification to the original system to include a closed loop conductive cold plate and cryogenic shroud

Improving your journal article using feedback from peer review.

Science.gov (United States)

Price, Bob

2014-09-30

While preparation of a journal article for submission may often include informal review by colleagues, an article is not accepted for publication until it has been formally peer reviewed. Peer review is the process whereby journal editors ask expert reviewers to examine the work submitted and prepare a report on its suitability for publication. Two or more revisions of the article may be required following peer review, with the author reworking the article in the light of feedback received on each occasion. This can be challenging for some authors, but used well, it offers a chance to improve the work to the required standard of the journal, and help the author present a more precise and coherent account of the arguments. The extent to which the author responds to the critical commentary of peer reviewers is important, because this may determine whether or not the article is published. This article explores the aims of peer reviewers and recommends ways in which authors can respond to the feedback provided.

A Content Analysis of 10 Years of Clinical Supervision Articles in Counseling

Science.gov (United States)

Bernard, Janine M.; Luke, Melissa

2015-01-01

This content analysis follows Borders's (2005) review of counseling supervision literature and includes 184 counselor supervision articles published over the past 10 years. Articles were coded as representing 1 of 3 research types or 1 of 3 conceptual types. Articles were then analyzed for main topics producing 11 topic categories.

Impact factor, eigenfactor, article influence, scopus SNIP, and SCImage journal rank of occupational therapy journals.

Science.gov (United States)

Brown, Ted; Gutman, Sharon A

2018-05-18

Journals are currently assessed and ranked using a number of different quantitative performance metrics. To compare and correlate the publication metrics of English-language occupational therapy journals published in 2015. Bibliometric data was sourced for 14 English-language occupational therapy journals including the Journal Citations Report (JCR) 2-year impact factor (IF), Eigenfactor Score (EFS), Article Influence Score (AIS), Scopus Source Normalized Impact per Paper (SNIP), Scopus Citescore, and SCImago Journal Rank (SJR) score. The JCR, Scopus, and SJR 2015 bibliometric data were correlated. The top six English-language occupational therapy journals in relation to JCR IF, EFS, AIS, SNIP, Citescore, SJR score, and SJR IIF were AJOT, AOTJ, POPT, CJOT, SJOT, and BJOT. JCR IF, EFS, JCR AIS, SNIP, Citescore, SJR score and SJR IIF were all significantly correlated with coefficients ranging from 0.751 to 0.961 (p article rankings rather than the singular use of IF scores that currently and frequently occurs in many jurisdictions.

The Roles of Conference Papers in IS

DEFF Research Database (Denmark)

Lanamäki, Arto; Persson, John Stouby

2016-01-01

Information Systems (IS) research has both a journal-oriented publication culture and a rich plethora of conferences. It is unclear why IS researchers even bother with conference publishing given the high focus on journals. Against this backdrop, the purpose of this paper is to increase our...... understanding of conference papers in IS and the role they play for the authoring researchers. We present the first analysis of the papers published during the first six years (2010-2015) in the Scandinavian Conference on Information Systems (SCIS). We conducted interviews with ten SCIS authors. Following...... a framework adopted from Åkerlind [1], we identified how SCIS papers have the roles of fulfilling requirements, establishing oneself, developing personally, enabling change, and other roles. This article contributes to the reflection literature on the IS field by applying a practice lens to understand...

High Impact Papers from November – December, 2013

Directory of Open Access Journals (Sweden)

Editorial Office

2014-12-01

Full Text Available High impact papers from a particular Issue are selected based on the quality of the article and the number of citations. High impact papers are typically recognized once the Issue completes the publication time period of 12 months. View in PDFFollowing articles are recognized as High Impact Papers from November-December, 2013.Lu L. Dose calculation algorithms in external beam photon radiation therapy. Int J Cancer Ther Oncol 2013; 1(2:01025.DOI: 10.14319/ijcto.0102.5Read                 Download                      CitationsKhosa F, Khan A, Shuaib W, Clouse M, Budoff M, Blankstein R, Nasir K. Radiation exposure for coronary artery calcium score at prospective 320 row multi-detector computed tomography. Int J Cancer Ther Oncol 2013; 1(2:01023.DOI: 10.14319/ijcto.0102.3Read                 Download                      Citations(High impact papers from January-March, 2014 will be recognized in the next Issue of the IJCTO

The top 100 cited articles on urological emergencies: A bibliometric analysis.

Science.gov (United States)

Kazımoğlu, Hatem; Dokur, Mehmet

2018-05-01

In this study, we bibliometrically evaluated the top 100 cited articles on urological emergencies published since 1975 with a multidisciplinary and interdisciplinary perspective. We obtained the data for this study from the Thomson Reuters Web of Science and PubMed. We determined 360 articles which were related directly or indirectly to urological emergencies between 1975 and 2017 and analyzed retrospectively the top 100 cited articles among these. The mean citation impact factor of the top 100 cited articles was 25.8±50.1 (range: 4-467) between 1991 and 2014. We determined that classical articles were cited for 2588 times and the total number of self-citations was 23 (0.8%). Highest publication rate per year was in 2006 (n=9). Among the institutions which published ≥2 articles per year University of Texas led the way with 5 articles. The top 100 articles came from 27 countries and 58% of these are from the USA (n=29), the United Kingdom (n=23) and Germany (n=6). For the top 3 journals of the 33 of top 100 articles most frequently cited were published in journals with an impact factor ≥2 namely, Journal of Urology (n=15), British Journal of Urology International (n=13) and Urology (n=5) respectively. The most frequently cited main topics were penile emergencies with 22 articles and acute scrotal problems with 15 articles. Most of the classical articles on urological emergencies were based on clinical researches (n=95) and also we found that the average level of evidence for the top 100 cited articles was 4.16 (range: 1-5). Mostly preferred publishing language was English among this scientific papers (n=90). Although not considered as a completely unbiased and adequate criterion for scientific evaluations, analysis of the top 100 cited articles provides us with important current data on urological emergencies.

The top cited articles in occupational therapy: a citation analysis study.

Science.gov (United States)

Nowrouzi-Kia, Behdin; Chidu, Carla; Carter, Lorraine; McDougall, Alicia; Casole, Jennifer

2018-01-01

The purpose of this study was to identify and review the most cited articles in the occupational therapy field. Using the multi-disciplinary Publish or Perish software to extract data, the top 50 lifetime and annual cited articles were examined. Studies were organized according to the following: year of publication, design, topic, number of authors, country of publication, and number of citations for each cohort. We found that randomized control trials were the dominant design type used in papers with the most lifetime (36.0%) and annual (26.0%) citations. Additionally, in both groups, the most frequently cited articles investigated predictors of functional outcome for patients. This comprehensive citation analysis will inform future research through its identification of major trends and well-established areas of study.

Full length articles published in BJOMS during 2010-11--an analysis by sub-specialty and study type.

Science.gov (United States)

Arakeri, Gururaj; Colbert, Serryth; Rosenbaum, Gavin; Brennan, Peter A

2012-12-01

Full length articles such as prospective and retrospective studies, case series, laboratory-based research and reviews form the majority of papers published in the British Journal of Oral and Maxillofacial Surgery (BJOMS). We were interested to evaluate the breakdown of these types of articles both by sub-specialty and the type of study as well as the proportion that are written by UK colleagues compared to overseas authors over a 2 year period (2010-11). A total of 191 full length articles across all sub-specialties of our discipline were published, with 107 papers (56%) coming from UK authors. There were proportionately more oncology papers arising from the UK than overseas (60 and 30% of total respectively) while the opposite was found for cleft/deformity studies (10% and 22%). There was only one laboratory-based study published from the UK compared with 27 papers from overseas. The number of quality papers being submitted to the Journal continues to increase, and the type of article being published between UK and overseas probably reflects different practices and case-loads amongst colleagues. The relatively few UK laboratory based studies published in BJOMS compared to overseas authors are most likely due to authors seeking the most prestigious journals possible for their work. Copyright © 2012 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Criteria for Public Open Space Enhancement to Achieve Social Interaction: a Review Paper

Science.gov (United States)

Salih, S. A.; Ismail, S.

2017-12-01

A This paper presents a various literatures, studies, transcripts and papers aiming to provide an overview of some theories and existing research on the significance of natural environments and green open spaces to achieve social interaction and outdoor recreation. The main objective of the paper is to identify the factors that affecting social interaction in green open spaces, through proving that an appropriate open spaces is important to enhance social interaction and community. This study employs (qualitative) summarizing content analysis method which mainly focused on collect and summarizing of documentation such as transcripts, articles, papers, and books from more than 25 source, regarding the importance of public open spaces for the community. The summarizing content analysis of this paper is the fundament for a qualitative oriented procedure of text interpretation used to analyse the information gathered. Results of this study confirms that sound social interaction need an appropriate physical space including criteria of: design, activities, access and linkage, administration and maintenance, place attachment and users’ characteristics, also previous studies in this area have a health perspective with measures of physical activity of open spaces in general.

Scientific Collaboration and Coauthors in Life Science Journal Articles

Directory of Open Access Journals (Sweden)

Ya-hsiu Fu

2002-12-01

Full Text Available It is common to conduct collaborative research in science and technology. In particular, the development of big science, Internet, and globalization facilitated the scientific collaboration. This study used two databases, Web of Science and Journal Citation Reports as data sources. From the analysis of 320 papers in 16 journals in life sciences, the results showed that there is no significant correlation between the impact factor of journals and the number of authors. Moreover, there is no correlation of authors and the cited times, either. The number of authors and cited times in most papers are under 10 persons and 25 times, respectively.[Article content in Chinese

Infrared thermography examination of paper structure

International Nuclear Information System (INIS)

Kiiskinen, H.T.; Kukkonen, H.K.; Pakarinen, P.I.; Laine, A.J.

1997-01-01

The paper industry has used IR cameras primarily for troubleshooting, where the most common examples include the examination of the condition of dryer fabrics and dryer cylinders and the analysis of moisture variations in a paper web. Another application extensively using IR thermography is non-destructive testing of composite materials. This paper presents some recently developed laboratory methods using an IR camera to examine paper structure. Specific areas include cockling, moisture content, thermal uniformity, mechanism of failure, and an analysis of the copying process. (author)

Versions in the lifecycle of academic papers user requirements and guidelins fo digital repositories

CERN Multimedia

CERN. Geneva

2005-01-01

An academic research paper evolves through various stages during its lifecycle, for example from early conference presentation through working paper to final published refereed journal article. Different versions can co-exist in publicly available electronic form. Finding out researchers’ attitudes towards storing, labelling and making accessible these different versions, both of their own and of their peers’ work is at the heart of the VERSIONS Project, funded by the JISC under the Digital Repositories Programme. The project addresses the issues and uncertainties relating to versions of academic papers in digital repositories. By including a user requirements study, the project will clarify the needs of researchers and other stakeholders for deposit, storage and accessibility of different versions in the lifecycle of a digital resource. In addition to looking at user needs, the project will analyse researchers’ current practice in terms of retention of author copies of their own material. This investig...

Top 50 most cited articles on primary tumors of the spine.

Science.gov (United States)

Alan, Nima; Cohen, Jonathan; Ozpinar, Alp; Agarwal, Nitin; Kanter, Adam S; Okonkwo, David O; Hamilton, D Kojo

2017-08-01

Citation analysis was performed in order to identify the top 50 most cited articles pertaining to the field of primary spinal tumors. This collection of articles highlights important trends in the neurosurgical literature. We searched the Thomson Reuters Web of Knowledge in order to identify articles pertaining to primary tumors of the spine. Impertinent articles were removed. The top 50 most cited articles were identified. Thereafter, article characteristics were determined including article type, article topic, level of evidence, and citation rate. The selected articles were published between 1951 and 2008. The most productive year was 1997 with 6 publications. The top 50 articles were published in twenty-two different journals, most commonly in Neurosurgery (12), Journal of Neurosurgery (8), and Spine (6). The most frequently cited article was by Tomita et al. written in 1997 which described total en bloc spondylectomy as a novel surgical technique in management of primary tumors of the vertebral column. We identified the 50 most-cited articles in the field of primary spinal tumors. This collection of articles serves as a reference for recognizing impactful studies in the field. Copyright © 2017. Published by Elsevier Ltd.

Flexible and foldable paper-substrate thermoelectric generator (teg)

KAUST Repository

Rojas, Jhonathan Prieto

2017-08-24

Flexible and foldable paper-substrate thermoelectric generators (TEGs) and methods for making the paper-substrate TEGs are disclosed. A method includes depositing a plurality of thermocouples in series on a paper substrate to create a paper-substrate TEG, wherein the plurality of thermocouples is deposited between two contact points of the paper-substrate TEG. The method may also include setting the power density and maximum achievable temperature gradient of the paper-substrate TEG by folding the paper-substrate TEG. A paper-substrate TEG apparatus may include a paper substrate and a plurality of thermocouples deposited in series on the paper substrate between two contact points of the paper-substrate TEG, wherein the power density and maximum achievable temperature gradient of the paper-substrate TEG is set by folding the paper-substrate TEG.

Coercive Journal Self Citations, Impact Factor, Journal Influence and Article Influence

NARCIS (Netherlands)

C-L. Chang (Chia-Lin); M.J. McAleer (Michael)

2013-01-01

textabstractThis paper examines the issue of coercive journal self citations and the practical usefulness of two recent journal performance metrics, namely the Eigenfactor score, which may be interpreted as measuring “Journal Influence”, and the Article Influence score, using the Thomson Reuters ISI

The Singapore-Cambridge General Certificate of Education Advanced-Level General Paper Examination

Science.gov (United States)

Hassan, Nurul Huda; Shih, Chih-Min

2013-01-01

This article describes and reviews the Singapore-Cambridge General Certificate of Education Advanced Level General Paper (GP) examination. As a written test that is administered to preuniversity students, the GP examination is internationally recognised and accepted by universities and employers as proof of English competence. In this article, the…

The 100 most cited articles in the endovascular management of intracranial aneurysms.

Science.gov (United States)

Maingard, Julian; Phan, Kevin; Ren, Yifan; Kok, Hong Kuan; Thijs, Vincent; Hirsch, Joshua A; Lee, Michael J; Chandra, Ronil V; Brooks, Duncan Mark; Asadi, Hamed

2018-01-19

Endovascular interventions for intracranial aneurysms have evolved substantially over the past several decades. A citation rank list is used to measure the scientific and/or clinical impact of an article. Our objective was to identify and analyze the characteristics of the 100 most cited articles in the field of endovascular therapy for intracranial aneurysms. We performed a retrospective bibliometric analysis between July and August 2017. Articles were searched on the Science Citation Index Expanded database using Web of Science in order to identify the most cited articles in the endovascular therapy of intracranial aneurysms since 1945. Using selected key terms ('intracranial aneurysm', 'aneurysm', 'aneurysmal subarachnoid', 'endovascular', 'coiling', 'stent-assisted', 'balloon-assisted', 'flow-diversion') yielded a total of 16 314 articles. The top 100 articles were identified and analyzed to extract relevant information, including citation count, authorship, article type, subject matter, institution, country of origin, and year of publication. Citations for the top 100 articles ranged from 133 to 1832. All articles were cited an average of 27 times per year. There were 45 prospective studies, including 7 level-II randomized controlled trials. Most articles were published in the 2000s (n=53), and the majority constituted level III or level IV evidence. Half of the top 100 articles arose from the USA. This study provides a comprehensive overview of the most cited articles in the endovascular management of intracranial aneurysms. It recognizes the contributions made by key authors and institutions, providing an important framework to an enhanced understanding of the evidence behind the endovascular treatment of aneurysms. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Introduction to the article collection 'Translation in healthcare: ethical, legal, and social implications'.

Science.gov (United States)

Morrison, Michael; Dickenson, Donna; Lee, Sandra Soo-Jin

2016-11-14

New technologies are transforming and reconfiguring the boundaries between patients, research participants and consumers, between research and clinical practice, and between public and private domains. From personalised medicine to big data and social media, these platforms facilitate new kinds of interactions, challenge longstanding understandings of privacy and consent, and raise fundamental questions about how the translational patient pathway should be organised.This editorial introduces the cross-journal article collection "Translation in healthcare: ethical, legal, and social implications", briefly outlining the genesis of the collection in the 2015 Translation in healthcare conference in Oxford, UK and providing an introduction to the contemporary ethical challenges of translational research in biology and medicine accompanied by a summary of the papers included in this collection.

Locating and parsing bibliographic references in HTML medical articles.

Science.gov (United States)

Zou, Jie; Le, Daniel; Thoma, George R

2010-06-01

The set of references that typically appear toward the end of journal articles is sometimes, though not always, a field in bibliographic (citation) databases. But even if references do not constitute such a field, they can be useful as a preprocessing step in the automated extraction of other bibliographic data from articles, as well as in computer-assisted indexing of articles. Automation in data extraction and indexing to minimize human labor is key to the affordable creation and maintenance of large bibliographic databases. Extracting the components of references, such as author names, article title, journal name, publication date and other entities, is therefore a valuable and sometimes necessary task. This paper describes a two-step process using statistical machine learning algorithms, to first locate the references in HTML medical articles and then to parse them. Reference locating identifies the reference section in an article and then decomposes it into individual references. We formulate this step as a two-class classification problem based on text and geometric features. An evaluation conducted on 500 articles drawn from 100 medical journals achieves near-perfect precision and recall rates for locating references. Reference parsing identifies the components of each reference. For this second step, we implement and compare two algorithms. One relies on sequence statistics and trains a Conditional Random Field. The other focuses on local feature statistics and trains a Support Vector Machine to classify each individual word, followed by a search algorithm that systematically corrects low confidence labels if the label sequence violates a set of predefined rules. The overall performance of these two reference-parsing algorithms is about the same: above 99% accuracy at the word level, and over 97% accuracy at the chunk level.

Validation of a new assessment tool for qualitative research articles

DEFF Research Database (Denmark)

Schou, Lone; Høstrup, Helle; Lyngsø, Elin

2012-01-01

schou l., høstrup h., lyngsø e.e., larsen s. & poulsen i. (2011) Validation of a new assessment tool for qualitative research articles. Journal of Advanced Nursing00(0), 000-000. doi: 10.1111/j.1365-2648.2011.05898.x ABSTRACT: Aim.  This paper presents the development and validation of a new...... assessment tool for qualitative research articles, which could assess trustworthiness of qualitative research articles as defined by Guba and at the same time aid clinicians in their assessment. Background.  There are more than 100 sets of proposals for quality criteria for qualitative research. However, we...... is the Danish acronym for Appraisal of Qualitative Studies. Phase 1 was to develop the tool based on a literature review and on consultation with qualitative researchers. Phase 2 was an inter-rater reliability test in which 40 health professionals participated. Phase 3 was an inter-rater reliability test among...

Paper Prototyping: The Surplus Merit of a Multi-Method Approach

Directory of Open Access Journals (Sweden)

Stephanie Bettina Linek

2015-07-01

Full Text Available This article describes a multi-method approach for usability testing. The approach combines paper prototyping and think-aloud with two supplemental methods: advanced scribbling and a handicraft task. The method of advanced scribbling instructs the participants to use different colors for marking important, unnecessary and confusing elements in a paper prototype. In the handicraft task the participants have to tinker a paper prototype of their wish version. Both methods deliver additional information on the needs and expectations of the potential users and provide helpful indicators for clarifying complex or contradictory findings. The multi-method approach and its surplus benefit are illustrated by a pilot study on the redesign of the homepage of a library 2.0. The findings provide positive evidence for the applicability of the advanced scribbling and the handicraft task as well as for the surplus merit of the multi-method approach. The article closes with a discussion and outlook. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs150379

Including Students with Visual Impairments: Softball

Science.gov (United States)

Brian, Ali; Haegele, Justin A.

2014-01-01

Research has shown that while students with visual impairments are likely to be included in general physical education programs, they may not be as active as their typically developing peers. This article provides ideas for equipment modifications and game-like progressions for one popular physical education unit, softball. The purpose of these…

How to Manage Rejected Scientific Papers? UNAIS as Final Solution.

Science.gov (United States)

Diana, Alessandro

2012-01-01

Before publication, biomedical papers might undergo a very complex process, from journal selection, authors' motivations for submissions, modifications, and final publication or refusal. UNAIS (Unpublished Articles In Science) is an online repository in which authors can publish previously rejected scientific articles or articles that have never been submitted for publication. At UNAIS, authors can also publish the reasons behind the refusals to publication. UNAIS is more than an e-journal: it is a scientific drop box in which scientists can find indicative and negative results, as well as ideas that can inspire others. UNAIS's goal is also to help students and scientists who want to learn how to write scientific articles. UNAIS' aim is to exchange and promote knowledge. Have a look on www.unais.net.

Highly cited works in radiology: the top 100 cited articles in radiologic journals.

Science.gov (United States)

Pagni, Matthew; Khan, Nickalus R; Cohen, Harris L; Choudhri, Asim F

2014-08-01

The number of citations a publication receives can be used to show its impact on a field of study. It may indicate the educational interest in a given population or underline a perceived or real educational gap. This article identifies and characterizes the 100 top cited publications in radiologic journals as of May 2013. All clinical radiologic journals listed by Thomson Reuters Journal Citation Reports in 2011 were identified. A total of 46 journals were identified, and all articles published within these journals were analyzed for citation counts. The top 100 highly cited articles were recorded. The most frequently cited radiologic articles appeared in 9 of the 46 journals. These included 59 articles in Radiology, 17 in Journal of Nuclear Medicine, 9 in the American Journal of Roentgenology, 5 in the British Journal of Radiology, 4 in Investigative Radiology, 2 in American Journal of Neuroradiology, 2 in European Radiology, 2 in Radiologic Clinics of North America, 1 in the Seminars in Nuclear Medicine, and 1 in Pediatric Radiology. The citation values ranged from 422 to 7506 with a mean of 751. Publication dates ranged from 1967 to 2006 with the 5-year period between 1986 and 1990 accounting for the largest percentage of articles. The most frequently studied radiologic modality was magnetic resonance imaging (MRI; 28 articles), followed by vascular/interventional (19 articles) and nuclear medicine (13 articles). The central nervous system was the most frequently studied organ system (22 articles), followed by mixed organ systems (14 articles) and liver (12 articles). The top cited articles in radiologic journals span a wide range of imaging modalities, subspecialties, and organ systems. Topics that occurred frequently in the top 100 cited articles included contrast and radiopharmaceutical characterization, MRI of motion, percutaneous radiofrequency ablation in the liver and percutaneous vertebroplasty. We present a methodology that uses citation analysis to

How much importance do we give to target audiences in article writing?

Science.gov (United States)

Nedjat, Sima; Nedjat, Saharnaz; Gholami, Jaleh; Ashoorkhani, Mahnaz; Maleki, Katayoun; Hejrie, Soroush Mortaz; Majdzadeh, Reza

2010-01-01

Writing papers can be used as a means to convey a message. Knowledge transfer is also about conveying the right message to the right target audience. The aim of this study was to determine the proportion of articles that had mentioned a clear message and the target audience in the abstract and the article as a whole, and also to examine their association with different determinant factors. Articles published from 2001 to 2006 that were based on clinical and health system research conducted on Iranian populations and on maternal care, diabetes and tuberculosis were searched systematically in domestic and international databases. Eventually checklists (Additional file 1) were completed for 795 articles. Overall, 98.5% of articles had a clear message, whereas 12.5% had addressed the direct target audience. Presence of a clear message in formatted abstracts were seen 3.6 times more (CI95%: 1.5-8.7) than in articles without formatted abstracts (p = 0.005). Addressing of the direct target audience was seen twice as much in health system research articles as compared to clinical studies, odds ratio was 2.3 (CI95%: 1.47-3.48, p<0.001). Creating a format for journal abstracts seems to be an effective intervention for presenting the message in articles.

Grays Harbor Paper

Energy Technology Data Exchange (ETDEWEB)

Quigg, B. [Grays Harbor Paper, Hoquiam, WA (United States)

2009-07-01

Wood waste biomass boilers are used at Grays Harbor Paper in Hoquiam, Washington. This presentation showed that large volumes of biomass are left after a traditional clearcut. The opportunities and challenges of collecting branches, tops and stumps from this wet coastal climate were outlined. The paper described some of the low-tech methods for picking up branches, stumps and woody debris. It included several photographs of custom logging machines for timber harvest, including a brush grapple slasher, a shearer shovel, chippers, grinders, slicesaws, trucks, trailers and caterpillar log loaders for handling slash. The slash recovery program relies on innovative harvesting machines that convert scattered logging slash into bundles that can be easily collected, transported, and stored for use in existing facilities that utilize wood fiber for fuel. figs.

Hygroscopic behavior of paper and books

NARCIS (Netherlands)

Derluyn, H.; Janssen, H.; Diepens, J.F.L.; Derome, D.; Carmeliet, J.

2007-01-01

This study presents experimental analysis and numerical modeling of hygroscopic moisture buffering by paper and books. First, a literature review of moisture transport properties of paper is presented. Experimental work on two paper types includes SEM analysis of the paper structure, determination

Survey of the situation of technology succession. Databases of articles including in industrial technology museums; Gijutsu keisho jokyo chosa. Sangyo gijutsu hakubutsukan shuzohin D.B. hen

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

To promote the succession of history of and the creative use of industrial science technologies, the paper made lists and databases of the articles of industrial technology museums and material halls in Japan. Record/preservation and collection/systematization of history of the industrial technology is useful for forming bases necessary for promotion of future research/development and international contribution. Museums and material halls are the fields for making comprehensive and practical activities. The data were made as one of the basic databases as the first step for promoting activities for examining the technical succession situation in a long term range continuously and systematically. In the classification of the data, the energy relation was divided into electric power, nuclear power, oil, coal, gas and energy in general. Others were classified into metal/mine, electricity/electronics/communication, chemistry/food, ship building/heavy machinery, printing/precision instrument, and textile/spinning. Moreover, the traffic relation was classified into railroad, automobiles/two-wheeled vehicles, airline/space, and ships. Items were also set of life relation, civil engineering/architecture, and general. The total number of the museums for the survey reached 208.

Standards for the preparation and writing of Psychology review articles

Directory of Open Access Journals (Sweden)

Luis Fernández-Ríos

2009-01-01

Full Text Available The synthesis of bibliographical resources addressing a topic is an interesting subject for research. It is included as part of literature reviews. The aim of this theoretical study is to establish a series of standards for planning, preparing and writing Psychology review articles. With this aim, the study suggests a set of guidelines for the structuring and justification of content for these types of articles: organisation of the article, background understanding of the topic, literature review, style and understanding of argumentative structure, theoretical and practical relevance of conclusions, the critical and interdisciplinary perspectives of the article, recommendations for future research and what the article can bring to the future advancement of the discipline. The work concludes on the relevance of the study undertaken and accepts the importance of undertaking the necessary reviews from the interdisciplinary perspective of building psychological understanding.

Method of coating an iron-based article

Science.gov (United States)

Magdefrau, Neal; Beals, James T.; Sun, Ellen Y.; Yamanis, Jean

2016-11-29

A method of coating an iron-based article includes a first heating step of heating a substrate that includes an iron-based material in the presence of an aluminum source material and halide diffusion activator. The heating is conducted in a substantially non-oxidizing environment, to cause the formation of an aluminum-rich layer in the iron-based material. In a second heating step, the substrate that has the aluminum-rich layer is heated in an oxidizing environment to oxidize the aluminum in the aluminum-rich layer.

Broadsheet English: Teaching English through Newspaper Articles

Science.gov (United States)

Akdemir, Ahmet Selcuk; Barin, Muzaffer; Demiroz, Hakan

2012-01-01

In this study it is aimed to debate whether newspaper articles can be used as speaking materials in foreign language courses as they include most actual and living language patterns by all means. A quasi-experimental study has been carried out at Vocational School of Tourism and Hotel Services of Erzincan University. Thirty-eight preparatory…

Differences in citation frequency of clinical and basic science papers in cardiovascular research

NARCIS (Netherlands)

Opthof, T.

2011-01-01

In this article, a critical analysis is performed on differences in citation frequency of basic and clinical cardiovascular papers. It appears that the latter papers are cited at about 40% higher frequency. The differences between the largest number of citations of the most cited papers are even

Differences in citation frequency of clinical and basic science papers in cardiovascular research

NARCIS (Netherlands)

Opthof, Tobias

In this article, a critical analysis is performed on differences in citation frequency of basic and clinical cardiovascular papers. It appears that the latter papers are cited at about 40% higher frequency. The differences between the largest number of citations of the most cited papers are even

Robust energy-absorbing compensators for the ACTEX II test article

Science.gov (United States)

Blaurock, Carl A.; Miller, David W.; Nye, Ted

1995-05-01

The paper addresses the problem of satellite solar panel vibration. A multi-layer vibration control scheme is investigated using a flight test article. Key issues in the active control portion are presented in the paper. The paper discusses the primary control design drivers, which are the time variations in modal frequencies due to configuration and thermal changes. A local control design approach is investigated, but found to be unworkable due to sensor/actuator non-collocation. An alternate design process uses linear robust control techniques, by describing the modal shifts as uncertainties. Multiple modal design, alpha- shifted multiple model, and a feedthrough compensation scheme are examined. Ground and simulation tests demonstrate that the resulting controllers provide significant vibration reduction in the presence of expected system variations.

The Content of Emotional Thoughts | Bloser | Philosophical Papers

African Journals Online (AJOL)

In this paper I examine Peter Goldie's theory of emotional thoughts and feelings, offered in his recent book The Emotions and subsequent articles. Goldie argues that emotional thoughts cannot be assimilated to belief or judgment, together with some added-on phenomenological component, and on this point I agree with ...

United Nations Charter, Chapter VII, Article 43: Now or Never.

Science.gov (United States)

Burkle, Frederick M

2018-04-25

For more than 75 years, the United Nations Charter has functioned without the benefit of Chapter VII, Article 43, which commits all United Nations member states "to make available to the Security Council, on its call, armed forces, assistance, facilities, including rights of passage necessary for the purpose of maintaining international peace and security." The consequences imposed by this 1945 decision have had a dramatic negative impact on the United Nation's functional capacity as a global body for peace and security. This article summarizes the struggle to implement Article 43 over the decades from the onset of the Cold War, through diplomatic attempts during the post-Cold War era, to current and often controversial attempts to provide some semblance of conflict containment through peace enforcement missions. The rapid growth of globalization and the capability of many nations to provide democratic protections to their populations are again threatened by superpower hegemony and the development of novel unconventional global threats. The survival of the United Nations requires many long overdue organizational structure and governance power reforms, including implementation of a robust United Nations Standing Task Force under Article 43. (Disaster Med Public Health Preparedness. 2018;page 1 of 8).

Authorship and characteristics of articles in pharmacy journals: changes over a 20-year interval.

Science.gov (United States)

Dotson, Bryan; McManus, Kevin P; Zhao, Jing J; Whittaker, Peter

2011-03-01

To our knowledge, no studies have evaluated authorship patterns and characteristics of articles in pharmacy journals. To investigate changes over a 20-year period in authorship and characteristics of articles in pharmacy journals. All articles published in the American Journal of Health-System Pharmacy, The Annals of Pharmacotherapy, and Pharmacotherapy in 1989, 1999, and 2009 were reviewed. Data collected for each article included article type, number of authors, number of physician authors, whether any author was affiliated with a pharmaceutical company, and source of funding. The number of articles included was 574 in 1989, 659 in 1999, and 589 in 2009. The mean number of authors per article increased from 2.5 in 1989 to 2.8 in 1999 and 3.6 in 2009 (p6 authors) increased from 2% in 1989 to 3% in 1999 and 9% in 2009 (pInternational Committee of Medical Journal Editors.

Electromagnetic Radiation : Variational Methods, Waveguides and Accelerators Including seminal papers of Julian Schwinger

CERN Document Server

Milton, Kimball A

2006-01-01

This is a graduate level textbook on the theory of electromagnetic radiation and its application to waveguides, transmission lines, accelerator physics and synchrotron radiation. It has grown out of lectures and manuscripts by Julian Schwinger prepared during the war at MIT's Radiation Laboratory, updated with material developed by Schwinger at UCLA in the 1970s and 1980s, and by Milton at the University of Oklahoma since 1994. The book includes a great number of straightforward and challenging exercises and problems. It is addressed to students in physics, electrical engineering, and applied mathematics seeking a thorough introduction to electromagnetism with emphasis on radiation theory and its applications.

The 100 Most-Cited Articles in Visceral Surgery: A Systematic Review.

Science.gov (United States)

Müller, Martin; Gloor, Beat; Candinas, Daniel; Malinka, Thomas

2016-01-01

Even though citation analysis has several limitations, it is a commonly used tool to determine the impact of scientific articles in different research fields. The study aims to identify and systematically review the 100 most cited articles in the field of visceral surgery focusing on papers that modified therapeutic concepts and influenced the surgeons' decision making. The 100 most cited clinical articles in visceral surgery were identified using Journal Citation Reports and Science Citation Index Expanded of the Web of Science (Thomson Reuters, Philadelphia, Pa., USA). Data for characterization of the articles were determined: Number of citations, research topic, journal, publication time, authorship, country of origin, type of article and level of evidence if reasonable. The 100 most cited articles were published in 17 journals; 72 articles were found in the 3 journals: New England Journal of Medicine (38), Annals of Surgery (21) and Lancet (13). The oldest article was published in 1908 in Annals of Surgery (ranked 76th) and the most recent in 2012 in Lancet (65th). Eighty articles were published between 1990 and 2010. The number of citations ranged from 667 to 4,666 (median 925). The leading country of origin was the United States with 39 articles, followed by articles originating from more than one country (30). There were 45 interventional studies (27 randomized controlled trials), 32 observational studies, 19 reviews and 4 guidelines, definitions or classifications. The level of evidence was low (IV) in 42 articles and high in 35 articles (Ia or Ib). A high number of citations did not reflect a high level of evidence. The topics and research questions of the identified articles covered a large area of visceral surgery. Some of the milestones in visceral surgery were identified. The high impact measured by citations did not reflect a high quality of research (level of evidence) in a considerable number of publications. © 2016 S. Karger AG, Basel.

Predicting the importance of current papers.

Energy Technology Data Exchange (ETDEWEB)

Klavans, Richard (SciTech Strategies, Inc., Berwyn, PA); Boyack, Kevin W.

2005-01-01

This article examines how well one can predict the importance of a current paper (a paper that is recently published in the literature). We look at three factors--journal importance, reference importance and author reputation. Citation-based measures of importance are used for all variables. We find that journal importance is the best predictor (explaining 22.3% out of a potential 29.1% of the variance in the data), and that this correlation value varies significantly by discipline. Journal importance is a better predictor of citation in Computer Science than in any other discipline. While the finding supports the present policy of using journal impact statistics as a surrogate for the importance of current papers, it calls into question the present policy of equally weighting current documents in text-based analyses. We suggest that future researchers take into account the expected importance of a document when attempting to describe the cognitive structure of a field.

Neutron absorbing article and method for manufacture of such article

International Nuclear Information System (INIS)

Hortman, M.T.; Mcmurtry, C.H.; Naum, R.G.; Owens, D.P.

1980-01-01

A neutron absorbing article, preferably in long, thin, flat form , suitable for but not necessarily limited to use in storage racks for spent nuclear fuel at locations between volumes of such stored fuel, to absorb neutrons from said spent fuel and prevent uncontrolled nuclear reaction of the spent fuel material, is composed of finely divided boron carbide particles and a solid, irreversibly cured phenolic polymer, forming a continuous matrix about the boron carbide particles, in such proportions that at least 6% of b10 from the boron carbide content is present therein. The described articles withstand thermal cycling from repeated spent fuel insertions and removals, withstand radiation from said spent nuclear fuel over long periods of time without losing desirable neutron absorbing and physical properties, are sufficiently chemically inert to water so as to retain neutron absorbing properties if brought into contact with it, are not galvanically corrodible and are sufficiently flexible so as to withstand operational basis earthquake and safe shutdown earthquake seismic events, without loss of neutron absorbing capability and other desirable properties, when installed in storage racks for spent nuclear fuel. The disclosure also relates to a plurality of such neutron absorbing articles in a storage rack for spent nuclear fuel and to a method for the manufacture of the articles

Bibliometric analysis of the top 100 cited cardiovascular articles.

Science.gov (United States)

Shuaib, Waqas; Khan, Muhammad S; Shahid, Hassan; Valdes, Emilio A; Alweis, Richard

2015-04-01

The number of citations an article receives is an important indication of its impact and contribution to the clinical world. There is a paucity of literature concerning top article citations in cardiology. The main objective of this investigation was to bridge this gap and to provide readers a practical guide in evaluating the cardiovascular literature. Scopus Library database was searched to determine the citations of all published cardiovascular articles. One hundred two journals were included in our investigation under the Institute of Science Information Web of Science subject category "cardiology, cardiovascular, and heart." We did not apply any time or study-type restriction in our search. The top 100 cited articles were selected and analyzed by 2 independent investigators. The journal with the highest number of top 100 cited articles was Circulation with 36, followed by 28 in the European Heart Journal. A statistically significant association was found between the journal impact factor and the number of top 100 cited articles (p journals such as The Lancet (n = 4) and The New England Journal of Medicine (n = 1) contributed only 5 articles to the list despite their extremely high impact factors. In conclusion, our analysis provides an insight on the citation frequency of top cited articles published in cardiovascular medicine to help recognize the quality of the works, discoveries, and the trends steering cardiology. Copyright © 2015 Elsevier Inc. All rights reserved.

The 25 most cited articles in arthroscopic orthopaedic surgery.

Science.gov (United States)

Cassar Gheiti, Adrian J; Downey, Richard E; Byrne, Damien P; Molony, Diarmuid C; Mulhall, Kevin J

2012-04-01

The purpose of this study was to use Web of Knowledge to determine which published arthroscopic surgery-related articles have been cited most frequently by other authors by ranking the 25 most cited articles. We furthermore wished to determine whether there is any difference between a categorical "journal-by-journal" analysis and an "all-database" analysis in arthroscopic surgery and whether such a search methodology would alter the results of previously published lists of "citation classics" in the field. We analyzed the characteristics of these articles to determine what qualities make an article important to this subspecialty of orthopaedic surgery. Web of Knowledge was searched on March 7, 2011, using the term "arthroscopy" for citations to articles related to arthroscopy in 61 orthopaedic journals and using the all-database function. Each of the 61 orthopaedic journals was searched separately for arthroscopy-related articles to determine the 25 most cited articles. An all-database search for arthroscopy-related articles was carried out and compared with a journal-by-journal search. Each article was reviewed for basic information including the type of article, authorship, institution, country, publishing journal, and year published. The number of citations ranged from 189 to 567 in a journal-by-journal search and from 214 to 1,869 in an all-database search. The 25 most cited articles on arthroscopic surgery were published in 11 journals: 8 orthopaedic journals and 3 journals from other specialties. The most cited article in arthroscopic orthopaedic surgery was published in The New England Journal of Medicine, which was not previously identified by a journal-by-journal search. An all-database search in Web of Knowledge gives a more in-depth methodology of determining the true citation ranking of articles. Among the top 25 most cited articles, autologous chondrocyte implantation/transplantation is currently the most cited and most popular topic in arthroscopic

The definite article in Romance expletives and long weak definites

Directory of Open Access Journals (Sweden)

M.Teresa Espinal

2017-03-01

Full Text Available This paper focuses on some issues involving expletive articles and long weak definites in Romance (mainly Spanish, Brazilian Portuguese and Catalan, in comparison to DPs that elicit a strong reading. We show the similarities between expletive definites and long weak definites, and we argue for an analysis in common to other polarity items in terms of polarity sensitivity. We reach the conclusion that the definite article in Romance comes in two variants: the referentially unique variant (to be translated as the semantic 'iota 'operator and the polar variant, formally characterized with an abstract [+σ] feature, that encodes a weak bound reading (to be semantically translated by an existential operator.

Buffer layers and articles for electronic devices

Science.gov (United States)

Paranthaman, Mariappan P.; Aytug, Tolga; Christen, David K.; Feenstra, Roeland; Goyal, Amit

2004-07-20

Materials for depositing buffer layers on biaxially textured and untextured metallic and metal oxide substrates for use in the manufacture of superconducting and other electronic articles comprise RMnO.sub.3, R.sub.1-x A.sub.x MnO.sub.3, and combinations thereof; wherein R includes an element selected from the group consisting of La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y, and A includes an element selected from the group consisting of Be, Mg, Ca, Sr, Ba, and Ra.

Bibliographic database of PACS-related articles from the SPIE literature

Science.gov (United States)

Shile, Peter E.; Freiermuth, Jennifer

1996-05-01

Publications of the International Society of Optical Engineering (SPIE) contain much of the relevant literature on Picture Archiving and Communications Systems (PACS) and related topics. In fact, many PACS-related articles indexed by the National Library of Medicine contain references to articles published by SPIE. Unfortunately, SPIE publications themselves are not indexed by the National Library of Medicine and thus can not be identified through Medline. The lack of a convenient mechanism for searching the SPIE literature is problematic for researchers in medical imaging. With the recent introduction on SPIE's Internet server of their Abstracts Online service and their In-CiteTM title and author searching software, the SPIE literature has become more accessible. However, the searching process is still a cumbersome and time consuming process, and it is not possible to perform key word searches of manuscript abstracts. In this paper we present results of our work on developing a mechanism to more thoroughly search SPIE publications for PACS-related articles.

Articles for high temperature service and methods for their manufacture

Science.gov (United States)

Sarrafi-Nour, Reza; Meschter, Peter Joel; Johnson, Curtis Alan; Luthra, Krishan Lal; Rosenzweig, Larry Steven

2016-06-14

An article for use in aggressive environments is presented. In one embodiment, the article comprises a substrate and a self-sealing and substantially hermetic sealing layer comprising an alkaline-earth aluminosilicate disposed over the bondcoat. The substrate may be any high-temperature material, including, for instance, silicon-bearing ceramics and ceramic matrix composites. A method for making such articles is also presented. The method comprises providing a substrate; disposing a self-sealing alkaline-earth aluminosilicate layer over the substrate; and heating the sealing layer to a sealing temperature at which at least a portion of the sealing layer will flow.

Using Google Scholar to Search for Online Availability of a Cited Article in Engineering Disciplines

Science.gov (United States)

Baldwin, Virginia A.

2009-01-01

Many published studies examine the effectiveness of Google Scholar (Scholar) as an index for scholarly articles. This paper analyzes the value of Scholar in finding and labeling online full text of articles using titles from the citations of engineering faculty publications. For the fields of engineering and the engineering colleges in the study,…

Do Mendeley reader counts reflect the scholarly impact of conference papers? An investigation of Computer Science and Engineering fields

Energy Technology Data Exchange (ETDEWEB)

Aduku, K.J.; Thelwall, M.; Kousha, K.

2016-07-01

Counts of Mendeley readers may give useful evidence about the impact of research. Although several studies have indicated that there are significant positive correlations between counts of Mendeley readers and citation counts for journal articles, it is not known how the pattern of association may vary between journal articles and conference papers. To fill this gap, Mendeley readership data and Scopus citation counts were extracted for both journal articles and conference papers published in 2011 in four fields for which conferences are important; Computer Science Applications, Computer Software, Building & Construction Engineering and Industrial & Manufacturing Engineering. Mendeley readership counts were found to correlate moderately with citation counts for both journal articles and conference papers in Computer Science Applications and Computer Software. Nevertheless, the correlations were much lower between Mendeley readers and citation counts for conference papers than for journal articles in Building & Construction Engineering and Industrial & Manufacturing Engineering. Hence, there seems to be disciplinary differences in the usefulness of Mendeley readership counts as impact indicators for conference papers, even between fields for which conferences are important. (Author)

Online Paper Repositories and the Role of Scholarly Societies: An AERA Conference Report

Science.gov (United States)

Educational Researcher, 2010

2010-01-01

This article examines issues faced by scholarly societies that are developing and sustaining online paper repositories. It is based on the AERA Conference on Online Paper Repositories, which focused on fundamental issues of policy and procedure important to the operations of online working paper repositories. The report and recommendations address…

Static, Lightweight Includes Resolution for PHP

NARCIS (Netherlands)

M.A. Hills (Mark); P. Klint (Paul); J.J. Vinju (Jurgen)

2014-01-01

htmlabstractDynamic languages include a number of features that are challenging to model properly in static analysis tools. In PHP, one of these features is the include expression, where an arbitrary expression provides the path of the file to include at runtime. In this paper we present two

The Right to Receive Information under Article 10 of the ECHT

DEFF Research Database (Denmark)

Herr, Robin E.

2011-01-01

The purpose of this paper is to investigate the right to receive information under Article 10 of the European Convention of Human Rights in order to determine whether or not it is relevant to copyright law. The bulk of the article describes how the right to receive information operates. Focus......, efforts are made to identify state obligations and trends that could potentially affect copyright. The article concludes with a brief statement of the areas of copyright law in which these obligations and trends could be relevant....... is placed on the composition of the right, the scope of the test to justify an interference, principles that may affect the Court’s evaluation and any negative or positive obligations that may arise. In conducting this part of the research, over 125 cases were investigated. After detailing the case law...

Open Access, Library Subscriptions, and Article Processing Charges

KAUST Repository

Vijayakumar, J.K.

2016-05-01

Hybrid journals contains articles behind a pay-wall to be subscribed, as well as papers made open access when author pays article processing charge (APC). In such cases, an Institution will end up paying twice and Publishers tend to double-dip. Discussions and pilot models are emerging on pricing options, such as “offset pricing,” [where APCs are adjusted or discounted with subscription costs as vouchers or reductions in next year subscriptions, APCs beyond the subscription costs are modestly capped etc] and thus reduce Institutions’ cost. This presentation will explain different models available and how can we attain a transparent costing structure, where the scholarly community can feel the fairness in Publishers’ pricing mechanisms. Though most of the offset systems are developed through national level or consortium level negotiations, experience of individual institutions, like KAUST that subscribe to large e-journals collections, is important in making right decisions on saving Institutes costs and support openness in scholarly communications.

Open Access, Library Subscriptions, and Article Processing Charges

KAUST Repository

Vijayakumar, J.K.; Tamarkin, Molly

2016-01-01

Hybrid journals contains articles behind a pay-wall to be subscribed, as well as papers made open access when author pays article processing charge (APC). In such cases, an Institution will end up paying twice and Publishers tend to double-dip. Discussions and pilot models are emerging on pricing options, such as “offset pricing,” [where APCs are adjusted or discounted with subscription costs as vouchers or reductions in next year subscriptions, APCs beyond the subscription costs are modestly capped etc] and thus reduce Institutions’ cost. This presentation will explain different models available and how can we attain a transparent costing structure, where the scholarly community can feel the fairness in Publishers’ pricing mechanisms. Though most of the offset systems are developed through national level or consortium level negotiations, experience of individual institutions, like KAUST that subscribe to large e-journals collections, is important in making right decisions on saving Institutes costs and support openness in scholarly communications.

1982 Australian coal conference papers

Energy Technology Data Exchange (ETDEWEB)

1982-01-01

This third Australian coal conference included papers discussing the market for coal, finance and investment, use of computers, mining, coal research, coal preparation and waste disposal, marketing and trade, and the transport of coal. All papers have been individually abstracted.

WATER RESISTANCE OF RECYCLED PAPER PANEL

Directory of Open Access Journals (Sweden)

Alexander Rani Suryandono

2017-06-01

Alice Wisler (2015 Facts about Recycling Paper. http://greenliving.lovetoknow.com/Facts_About_Recycling_Paper. Accessed 2 April 2016 Clay Miller (2011 5 Benefits of Recycling Paper. http://www.ways2gogreenblog.com/2011/09/28/5-benefits-of-recycling-paper/. Accessed 10 May 2016 Hari Goyal (2015 Grades of Paper. http://www.paperonweb.com/grade.htm. Accessed 2 April 2016 Hari Goyal (2015 Properties of Paper. http://www.paperonweb.com/paperpro.htm. Accessed 2 April 2016 Kathryn Sukalich (2016 Everything You Need to Know about Paper Recycling. http://earth911.com/business-policy/business/paper-recycling-details-basics/. Accessed 15 July 2016 [U1] Larry West (2015 Why Recycle Paper. http://environment.about.com/od/recycling/a/The-Benefits-Of-Paper-Recycling-Why-Recycle-Paper.htm. Accesed 15 June 2016 Marie-Luise Blue (2008 The Advantages of Recycling Paper. http://education.seattlepi.com/advantages-recycling-paper-3440.html. Accessed 15 June 2016 Nina Spitzer (2009 http://www.sheknows.com/home-and-gardening/articles/810025/the-impact-of-disposable-coffee-cups-on-the-environment. Accessed 15 June 2016 Radio New Zealand (2010 Iwi not Giving Up Fight against Tasman Mill Discharges. http://www.radionz.co.nz/news/regional/64521/iwi-not-giving-up-fight-against-tasman-mill-discharges. Accessed 15 July 2016 Rick LeBlanc (2016 Paper Recycling Facts, Figures and Information Sources. https://www.thebalance.com/paper-recycling-facts-figures-and-information-sources-2877868?_ga=1.192832942.544061388.1477446686. Accesed 2 April 2016 Robinson Meyer (2016 Will More Newspapers Go Nonprofit? http://www.theatlantic.com/technology/archive/2016/01/newspapers-philadelphia-inquirer-daily-news-nonprofit-lol-taxes/423960/. Accessed 3 August 2016 School of Engineering at Darthmouth (2010 Forest and Paper Industry. http://engineering.dartmouth.edu/~d30345d/courses/engs171/Paper.pdf. Accessed 2 April 2016 T. Subramani, V. Angappan. (2015. Experimental Investigation of Papercrete Concrete

Ultrathin metallized PBI paper

Science.gov (United States)

Chenevey, E. C.

1978-01-01

A study to determine the feasibility of preparing ultrathin papers with a target weight of 3.5 g/m squared from polybenzimidazole (PBI) fibrids was undertaken. Small hand sheets of target weight were fabricated. They were light brown, low density materials with sufficient strength to be readily handleable. Characterization of these sheets included strength, fold endurance, thermal gravimetric analysis in air and nitrogen and photomicrographs. Two different batches of PBI fibrids were studied and differences in fabrication performance were noted. In neither case could target weight papers be prepared using conventional paper making techniques.

Bibliometric trends of South African environmental health articles ...

African Journals Online (AJOL)

A total of 230 journal articles were included in the bibliometric analysis. The highest .... Ensuring the proper refuse storage, collection, transportation, transfer and processing, materials ..... problem, particularly in countries with high levels of inequality and poverty such ..... in source-separated urine in eThekwini, South Africa.

A bibliometric analysis of the 50 most cited papers in cleft lip and palate.

Science.gov (United States)

Mahon, Nicola A; Joyce, Cormac W

2015-02-01

Citation analysis is an established bibliometric method which catalogues papers according to the number of times they have been referenced. It is believed that the total number of citations an article receives reflects its importance among its peers. Never before has a bibliometric analysis been performed in the area of Cleft Lip and Palate. Our citation analysis creates a comprehensive list of the 50 most influential papers in this field. Journals specializing in Cleft Palate, Craniofacial, Plastic Surgery, Maxillofacial Surgery, Aesthetics and Radiology were searched to establish which articles most enriched the specialty over the past 70 years. The results show an interesting collection of papers which reveal developing trends in surgical techniques. These landmark papers mould and influence management and decision-making today.

All-printed paper-based memory

KAUST Repository

He, Jr-Hau; Lin, Chun-Ho; Lien, Der-Hsien

2016-01-01

All-printed paper-based substrate memory devices are described which can be prepared by a process that includes coating, using a screen printer, one or more areas of a paper substrate (102) with a conductor material (104), such as a carbon paste

Cascade Controller Including Back-stepping for Hydraulic-Mechanical Systems

DEFF Research Database (Denmark)

Choux, Martin; Hovland, Geir; Blanke, Mogens

2012-01-01

Development of a cascade controller structure including adaptive backstepping for a nonlinear hydraulic-mechanical system is considered in this paper where a dynamic friction (LuGre) model is included to obtain the necessary accuracy. The paper compares the performance of two variants of an adapt......Development of a cascade controller structure including adaptive backstepping for a nonlinear hydraulic-mechanical system is considered in this paper where a dynamic friction (LuGre) model is included to obtain the necessary accuracy. The paper compares the performance of two variants...... of an adaptive backstepping tracking controller with earlier results. The new control architecture is analysed and enhanced tracking performance is demonstrated when including the extended friction model. The complexity of the backstepping procedure is significantly reduced due to the cascade structure. Hence...

Feasibility of paper mulches in crop production —a review

Directory of Open Access Journals (Sweden)

Tapani Haapala

2014-02-01

Full Text Available   Mulching has become an important practice in modern field production. This article reviews the published research on paper mulches and discusses the opportunity that they offer for solving the problems of the immense use of plastics in agriculture and the associated environmental threat. Paper mulches break down naturally after usage and incorporate into the soil. Laying paper mulches in large scale farming is a problem to be solved. The quality of the paper needs to be adapted or improved for mulching purposes, and its price needs to be more competitive with that of plastic mulches. The review shows that there is considerable potential for using paper mulches in agriculture and horticulture.  

York Papers in Linguistics, Volume 17.

Science.gov (United States)

Local, J. K., Ed.; Warner, A. R., Ed.

1996-01-01

These 14 articles on aspects of linguistics include the following: "Economy and Optionality: Interpretations of Subjects in Italian" (David Adger); "Collaborative Repair in EFL Classroom Talk" (Zara Iles); "A Timing Model for Fast French" (Eric Keller, Brigitte Zellner); "Another Travesty of Representation:…

Radiological interference from personal articles in occupational radiation monitoring

International Nuclear Information System (INIS)

Krishnakumar, P.; Jayan, M.P; Pawar, V.J; Patil, S.L; Selvamani, N.; Vedram; Sureshkumar, M.K.; Chinnaesakki, S.

2016-01-01

This paper discusses the presence of radioactivity in some personal articles worn on sacred thread and the related difficulties faced by health physicists during occupational radiation monitoring in nuclear facilities. In an incident, the portal monitor installed at the exit gate of a nuclear facility indicated contamination on self of a radiation worker while passing through it. The worker was therefore, subjected to thorough check for external contamination by the plant health physicist, using a pan-cake contamination monitor. All the clothing of the person was also checked for contamination. On further detailed examination, a dark brownish personal article hanging on a sacred thread from his neck was found to be the source of contamination. This presentation aims at giving information to the health physics community on the possibility of such interferences during personal monitoring in nuclear facilities

1109-IJBCS-Article-Dr Olatunde Owoeye

African Journals Online (AJOL)

DR GATSING

Original Paper ... including DNA, proteins, and membrane lipids, eventually ... popular African vegetable whose health .... The plasma activity of alkaline ..... Revision. Committee. Coles EH. 1986. Veterinary Clinical. Pathology (4th Edn).

Introduction of article-processing charges for Population Health Metrics

Directory of Open Access Journals (Sweden)

Murray Christopher JL

2003-11-01

Full Text Available Abstract Population Health Metrics is an open-access online electronic journal published by BioMed Central – it is universally and freely available online to everyone, its authors retain copyright, and it is archived in at least one internationally recognised free repository. To fund this, from November 1 2003, authors of articles accepted for publication will be asked to pay an article-processing charge of US$500. This editorial outlines the reasons for the introduction of article-processing charges and the way in which this policy will work. Waiver requests will be considered on a case-by-case basis, by the Editor-in-Chief. Article-processing charges will not apply to authors whose institutions are 'members' of BioMed Central. Current members include NHS England, the World Health Organization, the US National Institutes of Health, Harvard, Princeton and Yale universities, and all UK universities. No charge is made for articles that are rejected after peer review. Many funding agencies have also realized the importance of open access publishing and have specified that their grants may be used directly to pay APCs.

Challenges of Criminal-Law Regulation of Mining in Colombia. A Study of the Article 333 of the Colombian Criminal Code

OpenAIRE

Suárez López, Beatriz Eugenia; Universidad Jorge Tadeo Lozano

2017-01-01

This paper presents a study of the article 333 of the Colombian Criminal Code, which establishes the crime of environmental contamination by exploitation of mining or hydrocarbon deposits. It analyzes the semantics and scope of this rule, establishing the criminal effects deriving from it. The paper focuses on the challenges that the article poses for the principle of legality, and address some dogmatic problems of it. This paper is part of the results of the research entitled "Environmental ...

Speech and scientific paper. A rhetorical approach

Directory of Open Access Journals (Sweden)

Juan Carlos Carmona Sandoval

2013-01-01

Full Text Available This essay attempts to show that the ancient rhetorical theory has explanatory capabilities to understand and learn to write modern texts and to analyze them in order to understand their communication skills, as in the scientific article, one of the most prestigious forms on scientific communication. It starts with the notion of discourse in the field of scientific communication and then address the rhetorical dimension of the paper.

SERS internship: Fall 1994 abstracts and research papers

International Nuclear Information System (INIS)

Goldman, B.

1994-12-01

This publication is a collection of articles generated as a result of the fall 1994 Science and Engineering Research Semester program at Lawrence Livermore Laboratory. Research titles include: electrochemical cells in the reduction of hexavalent chromium; an automated system for studying the power distribution of electron beams; the mapping of novel genes to human chromosome 19; bolometer analysis comparisons; design and implementation of the LLNL Gigabit Testbed; in vitro synthesis and purification of PhIP-Deoxyguanosine and PhIP-DNA Covalent Complexes; pre-thymic somatic mutation leads to high mutant frequency hypoxanthine-guanine phosphoribosyl transferase gene; characterization of thin film multi-layers with magnetization curves and modeling of low angle X-ray diffraction data; total least squares; determining the water content of the Geysers Graywacke of northern California; a general approach to sharing data between scientific representations; nanomechanical properties of SiC thin films grown from C 60 precursors; advanced information technology, a tool set for building clean database applications; the design of an automated electrolytic enrichment procedure for tritium; fluvial terrace dating using in-situ cosmogenic 21 Ne; computer- aided mapping of stream channels beneath the Lawrence Livermore National Laboratory, Livermore, CA; X-ray spectroscopic technique for energetic electron transport studies in short-pulse laser/plasma interactions. Separate entries have been put in the energy data base for articles from this report. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

SERS internship: Fall 1994 abstracts and research papers

Energy Technology Data Exchange (ETDEWEB)

Goldman, B.

1994-12-01

This publication is a collection of articles generated as a result of the fall 1994 Science and Engineering Research Semester program at Lawrence Livermore Laboratory. Research titles include: electrochemical cells in the reduction of hexavalent chromium; an automated system for studying the power distribution of electron beams; the mapping of novel genes to human chromosome 19; bolometer analysis comparisons; design and implementation of the LLNL Gigabit Testbed; in vitro synthesis and purification of PhIP-Deoxyguanosine and PhIP-DNA Covalent Complexes; pre-thymic somatic mutation leads to high mutant frequency hypoxanthine-guanine phosphoribosyl transferase gene; characterization of thin film multi-layers with magnetization curves and modeling of low angle X-ray diffraction data; total least squares; determining the water content of the Geysers Graywacke of northern California; a general approach to sharing data between scientific representations; nanomechanical properties of SiC thin films grown from C{sub 60} precursors; advanced information technology, a tool set for building clean database applications; the design of an automated electrolytic enrichment procedure for tritium; fluvial terrace dating using in-situ cosmogenic {sup 21}Ne; computer- aided mapping of stream channels beneath the Lawrence Livermore National Laboratory, Livermore, CA; X-ray spectroscopic technique for energetic electron transport studies in short-pulse laser/plasma interactions. Separate entries have been put in the energy data base for articles from this report. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Lucky Motifs in Chinese Folk Art: Interpreting Paper-cut from Chinese Shaanxi

OpenAIRE

Xuxiao WANG

2013-01-01

Paper-cut is not simply a form of traditional Chinese folk art. Lucky motifs developed in paper-cut certainly acquired profound cultural connotations. As paper-cut is a time-honoured skill across the nation, interpreting those motifs requires cultural receptiveness and anthropological sensitivity. The author of this article analyzes examples of paper-cut from Northern Shaanxi, China, to identify the cohesive motifs and explore the auspiciousness of the specific concepts of Fu, Lu, Shou, Xi. T...

[Use of theories and models on papers of a Latin-American journal in public health, 2000 to 2004].

Science.gov (United States)

Cabrera Arana, Gustavo Alonso

2007-12-01

To characterize frequency and type of use of theories or models on papers of a Latin-American journal in public health between 2000 and 2004. The Revista de Saúde Pública was chosen because of its history of periodic publication without interruption and current impact on the scientific communication of the area. A standard procedure was applied for reading and classifying articles in an arbitrary typology of four levels, according to the depth of the use of models or theoretical references to describe problems or issues, to formulate methods and to discuss results. Of 482 articles included, 421 (87%) were research studies, 42 (9%) reviews or special contributions and 19 (4%) opinion texts or assays . Of 421 research studies, 286 (68%) had a quantitative focus, 110 (26%) qualitative and 25 (6%) mixed. Reference to theories or models is uncommon, only 90 (19%) articles mentioned a theory or model. According to the depth of the use, 29 (6%) were classified as type I, 9 (2%) as type II, 6 (1.3%) were type III and the 46 remaining texts (9.5%) were type IV. Reference to models was nine-fold more frequent than the use of theoretical references. The ideal use, type IV, occurred in one of every ten articles studied. It is of relevance to show theoretical and models frames used when approaching topics, formulating hypothesis, designing methods and discussing findings in papers.

Process of producing a ceramic matrix composite article and article formed thereby

Science.gov (United States)

Corman, Gregory Scot [Ballston Lake, NY; McGuigan, Henry Charles [Duanesburg, NY; Brun, Milivoj Konstantin [Ballston Lake, NY

2011-10-25

A CMC article and process for producing the article to have a layer on its surface that protects a reinforcement material within the article from damage. The method entails providing a body containing a ceramic reinforcement material in a matrix material that contains a precursor of a ceramic matrix material. A fraction of the reinforcement material is present and possibly exposed at a surface of the body. The body surface is then provided with a surface layer formed of a slurry containing a particulate material but lacking the reinforcement material of the body. The body and surface layer are heated to form the article by converting the precursor within the body to form the ceramic matrix material in which the reinforcement material is contained, and by converting the surface layer to form the protective layer that covers any fraction of the reinforcement material exposed at the body surface.

Methods for forming complex oxidation reaction products including superconducting articles

International Nuclear Information System (INIS)

Rapp, R.A.; Urquhart, A.W.; Nagelberg, A.S.; Newkirk, M.S.

1992-01-01

This patent describes a method for producing a superconducting complex oxidation reaction product of two or more metals in an oxidized state. It comprises positioning at least one parent metal source comprising one of the metals adjacent to a permeable mass comprising at least one metal-containing compound capable of reaction to form the complex oxidation reaction product in step below, the metal component of the at least one metal-containing compound comprising at least a second of the two or more metals, and orienting the parent metal source and the permeable mass relative to each other so that formation of the complex oxidation reaction product will occur in a direction towards and into the permeable mass; and heating the parent metal source in the presence of an oxidant to a temperature region above its melting point to form a body of molten parent metal to permit infiltration and reaction of the molten parent metal into the permeable mass and with the oxidant and the at least one metal-containing compound to form the complex oxidation reaction product, and progressively drawing the molten parent metal source through the complex oxidation reaction product towards the oxidant and towards and into the adjacent permeable mass so that fresh complex oxidation reaction product continues to form within the permeable mass; and recovering the resulting complex oxidation reaction product

Recompressed exfoliated graphite articles

Science.gov (United States)

Zhamu, Aruna; Shi, Jinjun; Guo, Jiusheng; Jang, Bor Z

2013-08-06

This invention provides an electrically conductive, less anisotropic, recompressed exfoliated graphite article comprising a mixture of (a) expanded or exfoliated graphite flakes; and (b) particles of non-expandable graphite or carbon, wherein the non-expandable graphite or carbon particles are in the amount of between about 3% and about 70% by weight based on the total weight of the particles and the expanded graphite flakes combined; wherein the mixture is compressed to form the article having an apparent bulk density of from about 0.1 g/cm.sup.3 to about 2.0 g/cm.sup.3. The article exhibits a thickness-direction conductivity typically greater than 50 S/cm, more typically greater than 100 S/cm, and most typically greater than 200 S/cm. The article, when used in a thin foil or sheet form, can be a useful component in a sheet molding compound plate used as a fuel cell separator or flow field plate. The article may also be used as a current collector for a battery, supercapacitor, or any other electrochemical cell.

Infrared thermography for examination of paper structure

Science.gov (United States)

Kiiskinen, Harri T.; Pakarinen, Pekka I.

1998-03-01

The paper industry has used IR cameras primarily for troubleshooting, where the most common examples include the examination of the condition of dryer fabrics and dryer cylinders and the analysis of moisture variations in a paper web. Another application extensively using IR thermography is non-destructive testing of composite materials. This paper presents some recently developed laboratory methods using an IR camera to examine paper structure. Specific areas include cockling, moisture content, thermal uniformity, mechanism of failure, and an analysis of the copying process.

The 100 most-cited papers in general thoracic surgery: A bibliography analysis.

Science.gov (United States)

Ding, Hongdou; Song, Xiao; Chen, Linsong; Zheng, Xinlin; Jiang, Gening

2018-05-01

The status of citations can reflect the impact of a paper and its contribution to surgical practice. The aim of our study was to identify and review the 100 most-cited papers in general thoracic surgery. Relevant papers on general thoracic surgery were searched through Thomson Reuters Web of Science in the last week of November 2017. Results were returned in descending order of total citations. Their titles and abstracts were reviewed to identify whether they met our inclusion criteria by two thoracic surgeons independently. Characteristics of the first 100 papers, including title, journal name, country, first author, year of publication, total citations, citations in latest 5 years and average citation per year (ACY) were extracted and analyzed. Of the 100 papers, the mean number of citations was 322 with a range from 184 to 921. 19 journals published the papers from 1956 to 2012. Annals of Surgery had the largest number (29), followed by Journal of Thoracic and Cardiovascular Surgery (22) and Annals of Thoracic Surgery (21). The majority of the papers were published in 2000s (48) and originated from United States of America (62). There were 65 retrospective studies, 13 RCTs and 11 prospective studies. Orringer MB and Grillo HC contributed 4 first-author articles respectively. There were 53 papers on esophagus, 36 on lung, 6 on pleura and 5 on trachea. Our study identified the most-cited papers in the past several decades and offered insights into the development and advances of general thoracic surgery. It can help us understand the evidential basis of clinical decision-making today in the area. Copyright © 2018. Published by Elsevier Ltd.

Smart Farming: Including Rights Holders for Responsible Agricultural Innovation

Directory of Open Access Journals (Sweden)

Kelly Bronson

2018-02-01

Full Text Available This article draws on the literature of responsible innovation to suggest concrete processes for including rights holders in the “smart” agricultural revolution. It first draws upon historical agricultural research in Canada to highlight how productivist values drove seed innovations with particular consequences for the distribution of power in the food system. Next, the article uses document analysis to suggest that a similar value framework is motivating public investment in smart farming innovations. The article is of interest to smart farming’s decision makers (from farmers to governance actors and a broader audience – anyone interested in engendering equity through innovation-led societal transitions.

Review Article

African Journals Online (AJOL)

2012-09-27

Sep 27, 2012 ... rationalism vs. irrationalism and emancipation vs. deconstruction. This article tries to critically .... conceptions of time, limitations of modern culture, exaggerated rationality ... and organizational mastery of empirical processes” ...

Negative Impact of Article 98 Sanctions in the Western Hemisphere

National Research Council Canada - National Science Library

Ruiz, Robert D

2007-01-01

... (SAOs) have been established; countries not signing an Article 98 agreement are subject to security assistance sanctions, to include the loss of International Military Education and Training (IMET...

Top 100 cited articles on epilepsy and status epilepticus: A bibliometric analysis.

Science.gov (United States)

Park, Kang Min; Kim, Sung Eun; Lee, Byung In; Kim, Hyung Chan; Yoon, Dae Young; Song, Hong Ki; Bae, Jong Seok

2017-08-01

The purpose of this study is to identify the top 100-cited articles dedicated to epilepsy and status epilepticus published in journals from January, 1950 through February, 2016 that have made key contributions in the field. We performed a search of journals and selected the top 100-cited articles on epilepsy and status epilepticus, respectively, by utilizing the Institute for Scientific Information database available under the banner of the Web of Science. The top-cited articles on epilepsy and status epilepticus were all published in 24 journals, respectively. In both fields of epilepsy and status epilepticus, the most frequently cited journal was Epilepsia (26 articles on epilepsy and 19 articles on status epilepticus). The 100 most-cited articles in the field of both epilepsy and status epilepticus mainly originated from institutions in the United States of America. The articles on epilepsy included 25 laboratory studies, 15 pharmacotherapy studies, 13 general review studies, 12 surgery studies, 11 neuroimaging studies, eight epidemiology studies, eight neuropsychiatry studies, six genetic studies, and two electrophysiology studies, whereas 41 laboratory studies, 21 epidemiology studies, 16 pharmacotherapy studies, nine electrophysiology studies, nine general review studies, and four neuroimaging studies were included in the field of status epilepticus. We demonstrate that neuroimaging, genetics, and surgery are emerging topics in the field of epilepsy over the past decades. Moreover, we found that the majority of top-cited articles on epilepsy and status epilepticus originated from institutions in the United States of America and most were published in Epilepsia. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of a Hybrid Wing Body Center Section Test Article

Science.gov (United States)

Wu, Hsi-Yung T.; Shaw, Peter; Przekop, Adam

2013-01-01

The hybrid wing body center section test article is an all-composite structure made of crown, floor, keel, bulkhead, and rib panels utilizing the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) design concept. The primary goal of this test article is to prove that PRSEUS components are capable of carrying combined loads that are representative of a hybrid wing body pressure cabin design regime. This paper summarizes the analytical approach, analysis results, and failure predictions of the test article. A global finite element model of composite panels, metallic fittings, mechanical fasteners, and the Combined Loads Test System (COLTS) test fixture was used to conduct linear structural strength and stability analyses to validate the specimen under the most critical combination of bending and pressure loading conditions found in the hybrid wing body pressure cabin. Local detail analyses were also performed at locations with high stress concentrations, at Tee-cap noodle interfaces with surrounding laminates, and at fastener locations with high bearing/bypass loads. Failure predictions for different composite and metallic failure modes were made, and nonlinear analyses were also performed to study the structural response of the test article under combined bending and pressure loading. This large-scale specimen test will be conducted at the COLTS facility at the NASA Langley Research Center.

Pipe failure probability - the Thomas paper revisited

International Nuclear Information System (INIS)

Lydell, B.O.Y.

2000-01-01

Almost twenty years ago, in Volume 2 of Reliability Engineering (the predecessor of Reliability Engineering and System Safety), a paper by H. M. Thomas of Rolls Royce and Associates Ltd. presented a generalized approach to the estimation of piping and vessel failure probability. The 'Thomas-approach' used insights from actual failure statistics to calculate the probability of leakage and conditional probability of rupture given leakage. It was intended for practitioners without access to data on the service experience with piping and piping system components. This article revisits the Thomas paper by drawing on insights from development of a new database on piping failures in commercial nuclear power plants worldwide (SKI-PIPE). Partially sponsored by the Swedish Nuclear Power Inspectorate (SKI), the R and D leading up to this note was performed during 1994-1999. Motivated by data requirements of reliability analysis and probabilistic safety assessment (PSA), the new database supports statistical analysis of piping failure data. Against the background of this database development program, the article reviews the applicability of the 'Thomas approach' in applied risk and reliability analysis. It addresses the question whether a new and expanded database on the service experience with piping systems would alter the original piping reliability correlation as suggested by H. M. Thomas

Investigating and Annotating the Role of Citation in Biomedical Full-Text Articles.

Science.gov (United States)

Yu, Hong; Agarwal, Shashank; Frid, Nadya

2009-11-01

Citations are ubiquitous in scientific articles and play important roles for representing the semantic content of a full-text biomedical article. In this work, we manually examined full-text biomedical articles to analyze the semantic content of citations in full-text biomedical articles. After developing a citation relation schema and annotation guideline, our pilot annotation results show an overall agreement of 0.71, and here we report on the research challenges and the lessons we've learned while trying to overcome them. Our work is a first step toward automatic citation classification in full-text biomedical articles, which may contribute to many text mining tasks, including information retrieval, extraction, summarization, and question answering.

Smart Farming: Including Rights Holders for Responsible Agricultural Innovation

OpenAIRE

Kelly Bronson

2018-01-01

This article draws on the literature of responsible innovation to suggest concrete processes for including rights holders in the “smart” agricultural revolution. It first draws upon historical agricultural research in Canada to highlight how productivist values drove seed innovations with particular consequences for the distribution of power in the food system. Next, the article uses document analysis to suggest that a similar value framework is motivating public investment in smart farming i...

Five Classic Articles in Public Health

OpenAIRE

Borak, Jonathan

2010-01-01

In this brief review, Dr. Jonathan Borak comments on five seminal papers that helped shape the fields of epidemiology and public health. These papers include Hill?s criteria for inferring causality; the first proof of the multistage theory of cancer; the first evidence that subclinical lead exposures can cause neurobehavioral impairment in children; a simple yet robust study that had a major influence on setting current air pollution policies; and a landmark review of the general public?s per...

Resource Papers No. 4-12.

Science.gov (United States)

National Council for Resource Development, Washington, DC.

This document compiles nine papers issued by the National Council for Resource Development. Papers include: (1) "How to Be Successful at Grantsmanship--Guidelines for Proposal Writing--Foundation Proposals"; (2) "A Federal Glossary" (acronyms); (3) "Special Projects" (a working model for an institutional development office); (4) "The Role of the…

Oral cancer: exploring the stories in United Kingdom newspaper articles.

Science.gov (United States)

Kelly, C M; Johnson, I G; Morgan, M Z

2016-09-09

Objective Reports suggest that patients with oral cancer delay seeking help because they are unaware of the symptoms. The majority of adults (95%) engage with news reports and 40% read newspapers. Newspaper oral cancer stories may influence awareness and health-seeking behaviour. The aim of this study was to explore how oral cancer is portrayed in UK newspaper print media.Design Qualitative content analysis of articles from ten newspapers with the widest UK print circulation. All articles using the terms 'mouth cancer' and 'oral cancer' over a three year period were retrieved. Duplicates, non-cancer and non-human articles were excluded.Results 239 articles were analysed. Common topics included 'recent research', 'survivor stories', 'health information' and 'celebrity linkage'. Articles were often emotive, featuring smoking, alcohol, sex and celebrity. Articles lacked a proper evidence base and often failed to provide accurate information about signs and symptoms, information about prevention and signposting to treatment.Conclusions Opportunities to save lives are being missed. Further work to improve social responsibility in the media and develop guidance to enhance the quality of information, health reporting and signposting to help are indicated.

Content Analyses of Scientific Articles from Issues Published in Sport Mont Journal in 2011

Directory of Open Access Journals (Sweden)

Milos Kovacevic

2018-04-01

Full Text Available Sport Mont is scientific journal which uses contemporary methods with aim to present scientific knowledge to sport-conscious individuals. It is easily accessible with its printed and electronic edition, published three times a year by the Montenegrin Sport Academy (MSA, in February, June and October. Sport Mont functions as an open discussion forum on significant issues of current interest in fields of Sports Science and Medicine. It publishes original scientific papers, review papers, editorials, short reports, peer review - fair review, as well as invited papers and award papers. Sport Mont Journal covers wide range and Sport Science and Medicine. It includes all clinical aspects of exercise, health, and sport; exercise physiology and biophysical investigation of sports performance; sport biomechanics; sports nutrition; rehabilitation, physiotherapy; sports psychology; sport pedagogy, sport history, sport philosophy, sport sociology, sport management; and all aspects of scientific support of the sports coaches from the natural, social and humanistic side. This paper work it is about A Content Analysis of Published Articles in Sport Mont Journal in 2011. This paper work presents the table with titles of the scientific fields according to which the works were sorted and their exact number. In the subtitle, the results are all assigned to all the works that have been processed and, in the end, the subheading entitled discussion gives a brief overview of the results obtained. The aim of this paper work is to analyze the papers published in Sport Mont Journal in 2011. In such a way that all works will be selected according to the respective scientific fields to which they belong. This will allow easier search of the given source for all authors who, for some reason, serve the works published during this time period in Sport Mont.

The 100 top-cited articles in orthodontics from 1975 to 2011.

Science.gov (United States)

Hui, Jifang; Han, Zongkai; Geng, Guannan; Yan, Weijun; Shao, Ping

2013-05-01

To identify the 100 top-cited articles published in orthodontics journals and to analyze their characteristics to investigate the achievement and development of orthodontics research in past decades. The Institute for Scientific Information Web of Knowledge Database and the 2011 Journal Citation Report Science Editions were used to retrieve the 100 top-cited articles published in orthodontics journals since 1975. Some basic information was collected by the Analyze Tool on the Web of Science, including citation time, publication title, journal name, publication year, and country and institution of origin. A further study was then performed to determine authorship, article type, field of study, study design, and level of evidence. The 100 target articles were retrieved from three journals: American Journal of Orthodontics and Dentofacial Orthopedics (n  =  74), The Angle Orthodontist (n = 15), and European Journal of Orthodontics (n  =  11). Since 1975, the articles cited 89 to 545 times mainly originated from the United States, and the overwhelming majority of articles were clinical. The most common study design was case series; 40 articles were classified as level IV and 12 as level V evidence. The 100 top-cited articles in orthodontics are generally old articles, rarely possessing high-level evidence.

Thin, Flexible Secondary Li-Ion Paper Batteries

KAUST Repository

Hu, Liangbing

2010-10-26

There is a strong interest in thin, flexible energy storage devices to meet modern society needs for applications such as interactive packaging, radio frequency sensing, and consumer products. In this article, we report a new structure of thin, flexible Li-ion batteries using paper as separators and free-standing carbon nanotube thin films as both current collectors. The current collectors and Li-ion battery materials are integrated onto a single sheet of paper through a lamination process. The paper functions as both a mechanical substrate and separator membrane with lower impedance than commercial separators. The CNT film functions as a current collector for both the anode and the cathode with a low sheet resistance (∼5 Ohm/sq), lightweight (∼0.2 mg/cm2), and excellent flexibility. After packaging, the rechargeable Li-ion paper battery, despite being thin (∼300 μm), exhibits robust mechanical flexibility (capable of bending down to <6 mm) and a high energy density (108 mWh/g). © 2010 American Chemical Society.

688,112 statistical results: Content mining psychology articles for statistical test results

OpenAIRE

Hartgerink, C.H.J.

2016-01-01

In this data deposit, I describe a dataset that is the result of content mining 167,318 published articles for statistical test results reported according to the standards prescribed by the American Psychological Association (APA). Articles published by the APA, Springer, Sage, and Taylor & Francis were included (mining from Wiley and Elsevier was actively blocked). As a result of this content mining, 688,112 results from 50,845 articles were extracted. In order to provide a comprehensive set...

To improve the quality of the statistical analysis of papers published in the Journal of the Korean Society for Therapeutic Radiology and Oncology

International Nuclear Information System (INIS)

Park, Hee Chul; Choi, Doo Ho; Ahn, Song Vogue

2008-01-01

To improve the quality of the statistical analysis of papers published in the Journal of the Korean Society for Therapeutic Radiology and Oncology (JKOSTRO) by evaluating commonly encountered errors. Materials and Methods: Papers published in the JKOSTRO from January 2006 to December 2007 were reviewed for methodological and statistical validity using a modified version of Ahn's checklist. A statistician reviewed individual papers and evaluated the list items in the checklist for each paper. To avoid the potential assessment error by the statistician who lacks expertise in the field of radiation oncology; the editorial board of the JKOSTRO reviewed each checklist for individual articles. A frequency analysis of the list items was performed using SAS (version 9.0, SAS Institute, NC, USA) software. Results: A total of 73 papers including 5 case reports and 68 original articles were reviewed. Inferential statistics was used in 46 papers. The most commonly adopted statistical methodology was a survival analysis (58.7%). Only 19% of papers were free of statistical errors. Errors of omission were encountered in 34 (50.0%) papers. Errors of commission were encountered in 35 (51.5%) papers. Twenty-one papers (30.9%) had both errors of omission and commission. Conclusion: A variety of statistical errors were encountered in papers published in the JKOSTRO. The current study suggests that a more thorough review of the statistical analysis is needed for manuscripts submitted in the JKOSTRO

International Journal of Molecular Science 2017 Best Paper Award.

Science.gov (United States)

2017-11-02

The Editors of the International Journal of Molecular Sciences have established the Best Paper Award to recognize the most outstanding articles published in the areas of molecular biology, molecular physics and chemistry that have been published in the International Journal of Molecular Sciences. The prizes have been awarded annually since 2012 [...].

Learning to rank figures within a biomedical article.

Directory of Open Access Journals (Sweden)

Feifan Liu

Full Text Available Hundreds of millions of figures are available in biomedical literature, representing important biomedical experimental evidence. This ever-increasing sheer volume has made it difficult for scientists to effectively and accurately access figures of their interest, the process of which is crucial for validating research facts and for formulating or testing novel research hypotheses. Current figure search applications can't fully meet this challenge as the "bag of figures" assumption doesn't take into account the relationship among figures. In our previous study, hundreds of biomedical researchers have annotated articles in which they serve as corresponding authors. They ranked each figure in their paper based on a figure's importance at their discretion, referred to as "figure ranking". Using this collection of annotated data, we investigated computational approaches to automatically rank figures. We exploited and extended the state-of-the-art listwise learning-to-rank algorithms and developed a new supervised-learning model BioFigRank. The cross-validation results show that BioFigRank yielded the best performance compared with other state-of-the-art computational models, and the greedy feature selection can further boost the ranking performance significantly. Furthermore, we carry out the evaluation by comparing BioFigRank with three-level competitive domain-specific human experts: (1 First Author, (2 Non-Author-In-Domain-Expert who is not the author nor co-author of an article but who works in the same field of the corresponding author of the article, and (3 Non-Author-Out-Domain-Expert who is not the author nor co-author of an article and who may or may not work in the same field of the corresponding author of an article. Our results show that BioFigRank outperforms Non-Author-Out-Domain-Expert and performs as well as Non-Author-In-Domain-Expert. Although BioFigRank underperforms First Author, since most biomedical researchers are either in- or

Learning to rank figures within a biomedical article.

Science.gov (United States)

Liu, Feifan; Yu, Hong

2014-01-01

Hundreds of millions of figures are available in biomedical literature, representing important biomedical experimental evidence. This ever-increasing sheer volume has made it difficult for scientists to effectively and accurately access figures of their interest, the process of which is crucial for validating research facts and for formulating or testing novel research hypotheses. Current figure search applications can't fully meet this challenge as the "bag of figures" assumption doesn't take into account the relationship among figures. In our previous study, hundreds of biomedical researchers have annotated articles in which they serve as corresponding authors. They ranked each figure in their paper based on a figure's importance at their discretion, referred to as "figure ranking". Using this collection of annotated data, we investigated computational approaches to automatically rank figures. We exploited and extended the state-of-the-art listwise learning-to-rank algorithms and developed a new supervised-learning model BioFigRank. The cross-validation results show that BioFigRank yielded the best performance compared with other state-of-the-art computational models, and the greedy feature selection can further boost the ranking performance significantly. Furthermore, we carry out the evaluation by comparing BioFigRank with three-level competitive domain-specific human experts: (1) First Author, (2) Non-Author-In-Domain-Expert who is not the author nor co-author of an article but who works in the same field of the corresponding author of the article, and (3) Non-Author-Out-Domain-Expert who is not the author nor co-author of an article and who may or may not work in the same field of the corresponding author of an article. Our results show that BioFigRank outperforms Non-Author-Out-Domain-Expert and performs as well as Non-Author-In-Domain-Expert. Although BioFigRank underperforms First Author, since most biomedical researchers are either in- or out

Paper recycling framework, the "Wheel of Fiber".

Science.gov (United States)

Ervasti, Ilpo; Miranda, Ruben; Kauranen, Ilkka

2016-06-01

At present, there is no reliable method in use that unequivocally describes paper industry material flows and makes it possible to compare geographical regions with each other. A functioning paper industry Material Flow Account (MFA) that uses uniform terminology and standard definitions for terms and structures is necessary. Many of the presently used general level MFAs, which are called frameworks in this article, stress the importance of input and output flows but do not provide a uniform picture of material recycling. Paper industry is an example of a field in which recycling plays a key role. Additionally, terms related to paper industry recycling, such as collection rate, recycling rate, and utilization rate, are not defined uniformly across regions and time. Thus, reliably comparing material recycling activity between geographical regions or calculating any regional summaries is difficult or even impossible. The objective of this study is to give a partial solution to the problem of not having a reliable method in use that unequivocally describes paper industry material flows. This is done by introducing a new material flow framework for paper industry in which the flow and stage structure supports the use of uniform definitions for terms related to paper recycling. This new framework is termed the Detailed Wheel of Fiber. Copyright © 2016 Elsevier Ltd. All rights reserved.

27 CFR 53.181 - Further manufacture included.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Further manufacture... Further manufacture included. (a) In general. The payment of tax imposed by chapter 32 of the Code on the... of any use in further manufacture, or sale as part of a second manufactured article, described in...

Surgical Education's 100 Most Cited Articles: A Bibliometric Analysis.

Science.gov (United States)

Matthews, Alexander H; Abdelrahman, Tarig; Powell, Arfon G M T; Lewis, Wyn G

2016-01-01

Bibliometric analysis highlights the key topics and publications, which have shaped surgical education. Here, the 100 most cited articles in the arena of surgical education were analyzed. Thomson Reuters Web of Science was interrogated using the keyword search terms "surgery" and ("learning" or "skills" or "competence" or "assessment" or "training" or "procedure-based assessments" or "performance" or "technical skills" or "curriculum" or "education" or "mentoring"] to identify all English language full articles, and the 100 most cited articles were analyzed by topic, journal, author, year, institution, and country of origin. A total of 403,733 eligible articles were returned and the median citation number was 164 (range: 107-1018). The most cited article (by Seymour, Yale University School of Medicine, Annals of Surgery, 1018 citations) focused on the use of virtual reality surgical simulation training. Annals of Surgery published the highest number of articles and received the most citations (n = 16, 3715 citations). The countries with the greatest number of publications were the USA (n = 45), Canada (n = 19), and the UK (n = 18). The commonest topics included simulation (n = 45) and assessment of clinical competence (n = 40). Surgical skill acquisition and assessment was the area of focus of 85% of the most cited contemporary articles, and this study provides the most cited references, serving as a guide as to what makes a citable published work in the field of surgical education. Copyright © 2016 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Scientometric analysis and mapping of scientific articles on Behcet's disease.

Science.gov (United States)

Shahram, Farhad; Jamshidi, Ahmad-Reza; Hirbod-Mobarakeh, Armin; Habibi, Gholamreza; Mardani, Amir; Ghaemi, Marjan

2013-04-01

Behçet's disease (BD) is a systemic vasculitis disease with oral and genital aphthous ulceration, uveitis, skin manifestations, arthritis and neurological involvement. Many investigators have published articles on BD in the last two decades since introduction of diagnosis criteria by the International Study Group for Behçet's Disease in 1990. However, there is no scientometric analysis available for this increasing amount of literature. A scientometric analysis method was used to achieve a view of scientific articles about BD which were published between 1990 and 2010, by data retrieving from ISI Web of Science. The specific features such as publication year, language of article, geographical distribution, main journal in this field, institutional affiliation and citation characteristics were retrieved and analyzed. International collaboration was analyzed using Intcoll and Pajek softwares. There was a growing trend in the number of BD articles from 1990 to 2010. The number of citations to BD literature also increased around 5.5-fold in this period. The countries found to have the highest output were Turkey, Japan, the USA and England; the first two universities were from Turkey. Most of the top 10 journals publishing BD articles were in the field of rheumatology, consistent with the subject areas of the articles. There was a correlation between the citations per paper and the impact factor of the publishing journal. This is the first scientometric analysis of BD, showing the scientometric characteristics of ISI publications on BD. © 2013 The Authors International Journal of Rheumatic Diseases © 2013 Asia Pacific League of Associations for Rheumatology and Wiley Publishing Asia Pty Ltd.

Method for fabricating boron carbide articles

International Nuclear Information System (INIS)

Ardary, Z.; Reynolds, C.

1980-01-01

Described is a method for fabricating an essentially uniformly dense boron carbide article of a length-to-diameter or width ratio greater than 2 to 1 comprising the steps of providing a plurality of article segments to be joined together to form the article with each of said article segments having a length-to-diameter or width ratio less than 1.5 to 1. Each segment is fabricated by hot pressing a composition consisting of boron carbide powder at a pressure and temperature effective to provide the article segment with a density greater than about 85% of theoretical density, providing each article segment with parallel planar end surfaces, placing a plurality of said article segments in a hot-pressing die in a line with the planar surfaces of adjacent article segments being disposed in intimate contact, and hot pressing the aligned article segments at a temperature and pressure effective to provide said article with a density over the length thereof in the range of about 94 to 98 percent theoretical density and greater than the density provided in the discrete hot pressing of each of the article segments and to provide a bond between adjacent article segments with said bond being at least equivalent in hardness, strength and density to a remainder of said article

Is email a reliable means of contacting authors of previously published papers? A study of the Emergency Medicine Journal for 2001.

Science.gov (United States)

O'Leary, F

2003-07-01

To determine whether it is possible to contact authors of previously published papers via email. A cross sectional study of the Emergency Medicine Journal for 2001. 118 articles were included in the study. The response rate from those with valid email addresses was 73%. There was no statistical difference between the type of email address used and the address being invalid (p=0.392) or between the type of article and the likelihood of a reply (p=0.197). More responses were obtained from work addresses when compared with Hotmail addresses (86% v 57%, p=0.02). Email is a valid means of contacting authors of previously published articles, particularly within the emergency medicine specialty. A work based email address may be a more valid means of contact than a Hotmail address.

Articles about MedlinePlus

Science.gov (United States)

... MedlinePlus → Articles about MedlinePlus URL of this page: https://medlineplus.gov/bibliography.html Articles about MedlinePlus To ... Dec 29]; 3(5):256-60. Available from: http://ecp.acponline.org/sepoct00/nlm.htm . Marill JL, ...

Two-ply channels for faster wicking in paper-based microfluidic devices.

Science.gov (United States)

Camplisson, Conor K; Schilling, Kevin M; Pedrotti, William L; Stone, Howard A; Martinez, Andres W

2015-12-07

This article describes the development of porous two-ply channels for paper-based microfluidic devices that wick fluids significantly faster than conventional, porous, single-ply channels. The two-ply channels were made by stacking two single-ply channels on top of each other and were fabricated entirely out of paper, wax and toner using two commercially available printers, a convection oven and a thermal laminator. The wicking in paper-based channels was studied and modeled using a modified Lucas-Washburn equation to account for the effect of evaporation, and a paper-based titration device incorporating two-ply channels was demonstrated.

TU-B-16A-01: To Which Journal Should I Submit My Paper

International Nuclear Information System (INIS)

Williamson, J; Mills, M; Klein, E; Pawlicki, T

2014-01-01

Research papers authored by Medical Physicists address a large spectrum of oncologic, imaging, or basic research problems; exploit a wide range of physical and engineering methodologies; and often describe the efforts of a multidisciplinary research team. Given the large number (about 100) competing journals accepting medical physics articles, it may not be clear to an individual author which journal is the best venue for disseminating their work to the scientific community. Relevant factors usually include the Journal’s audience and scientific impact, but also such factors as perceived acceptance rate, interest in their topic, and quality of service. The purpose of this symposium is to provide the medical physics community with an overview of scope, review processes, and article guidelines for the following journals: Medical Physics, International Journal of Radiation Biology and Physics, Journal of Applied Clinical Medical Physics, and Practical Radiation Oncology. The senior editors for each journal will provide details as to the journals review process, for example: single blind versus double blind reviews; the hierarchy of the review process in terms of editorial board structure; the reality of acceptance, in terms of acceptance rate; and the types of research the journal prefers to publish. The goal is to provide for authors guidance before they begin to write their papers, not only for proper formatting, but also that the readership is appropriate for the particular paper, hopefully increasing the likelihood of publication. Learning Objectives: To review each Journal’s submission and review process Guidance as to how to increase chances of acceptance To help decipher which journal is appropriate for a given work

TU-B-16A-01: To Which Journal Should I Submit My Paper

Energy Technology Data Exchange (ETDEWEB)

Williamson, J [Virginia Commonwealth University, Richmond, VA (United States); Mills, M [James Graham Brown Cancer Center, Louisville, KY (United States); Klein, E [Washington University, Saint Louis, MO (United States); Pawlicki, T [UCSD Medical Center, La Jolla, CA (United States)

2014-06-15

Research papers authored by Medical Physicists address a large spectrum of oncologic, imaging, or basic research problems; exploit a wide range of physical and engineering methodologies; and often describe the efforts of a multidisciplinary research team. Given the large number (about 100) competing journals accepting medical physics articles, it may not be clear to an individual author which journal is the best venue for disseminating their work to the scientific community. Relevant factors usually include the Journal’s audience and scientific impact, but also such factors as perceived acceptance rate, interest in their topic, and quality of service. The purpose of this symposium is to provide the medical physics community with an overview of scope, review processes, and article guidelines for the following journals: Medical Physics, International Journal of Radiation Biology and Physics, Journal of Applied Clinical Medical Physics, and Practical Radiation Oncology. The senior editors for each journal will provide details as to the journals review process, for example: single blind versus double blind reviews; the hierarchy of the review process in terms of editorial board structure; the reality of acceptance, in terms of acceptance rate; and the types of research the journal prefers to publish. The goal is to provide for authors guidance before they begin to write their papers, not only for proper formatting, but also that the readership is appropriate for the particular paper, hopefully increasing the likelihood of publication. Learning Objectives: To review each Journal’s submission and review process Guidance as to how to increase chances of acceptance To help decipher which journal is appropriate for a given work.

Original Article

African Journals Online (AJOL)

Administratör

Original Article. Prevalence of Gall Bladder Stones among Type 2 Diabetic ... Increasing age, female gender, overweight, familial history of the disease and type 2 diabetes mellitus is all associated ... GBS development in diabetics. An Italian ...

Red Card Article 17?

OpenAIRE

Molenaar, Dick

2012-01-01

textabstractIn this article, the authors assess the current position regarding the debate over article 17 of the OECD Model (2010) and whether or not the provision should be amended, or even be considered for removal from the OECD Model.

The article critique as a problem-based teaching method for medical students early in their training: a French example using anatomy.

Science.gov (United States)

Havet, Eric; Duparc, Fabrice; Peltier, Johan; Tobenas-Dujardin, Anne-Claire; Fréger, Pierre

2012-01-01

In France, "article critique" became a particular teaching method in the second part of the medical curriculum. It approaches a reading exercise of scientific medical papers similar to that of journal club. It could be compared to reviewing a paper as performed by reviewers of a scientific journal. We studied the relevancy of that teaching method for the youngest medical students. Our questions were about the understanding and the analyzing ability of a scientific paper while students have just learned basic medical sciences as anatomy. We have included 54 "article critique" written by voluntary students in second and third years of medical cursus. All of the IMRaD structure items (introduction, materials and methods, results and discussion) were analyzed using a qualitative scale for understanding as for analyzing ability. For understanding, 89-96% was good or fair and for the analyzing ability, 93-100% was good or fair. The anatomical papers were better understood than therapeutic or paraclinical studies, but without statistical difference, except for the introduction chapter. Results for analyzing ability were various according to the subject of the papers. This teaching method could be compared to a self-learning method, but also to a problem-based learning method. For the youngest students, the lack of medical knowledge aroused the curiosity. Their enthusiasm to learn new medical subjects remained full. The authors would insist on the requirement of rigorous lessons about evidence-based medicine and IMRaD structure and on a necessary companionship of the students by the teachers.

Predicting long-term citation impact of articles in social and personality psychology.

Science.gov (United States)

Haslam, Nick; Koval, Peter

2010-06-01

The citation impact of a comprehensive sample of articles published in social and personality psychology journals in 1998 was evaluated. Potential predictors of the 10-yr. citation impact of 1580 articles from 37 journals were investigated, including number of authors, number of references, journal impact factor, author nationality, and article length, using linear regression. The impact factor of the journal in which articles appeared was the primary predictor of the citations that they accrued, accounting for 30% of the total variance. Articles with greater length, more references, and more authors were cited relatively often, although the citation advantage of longer articles was not proportionate to their length. A citation advantage was also enjoyed by authors from the United States of America, Canada, and the United Kingdom. 37% of the variance in the total number of citations was accounted for by the study variables.

Article of Clothing for Storing and Deploying a Scarf

Science.gov (United States)

Romero, Robert (Inventor)

2015-01-01

A clothing article surrounds a wearer's upper torso. The article includes connected front portion, a collar. A sleeve is formed in the front portion. A jacket, and coat with an attachable/detachable scarf will be folded and stored in the inter portion of the front side of the collar area with elastic at each end and Velcro onto the inner portion of your collar, therefore eliminating the lost of them by any consumers, and especially children. A sleeve like collar attached to the coat and jacket for storing a scarf and making it easily deployable while in use.

Research Article

African Journals Online (AJOL)

2016-06-13

Jun 13, 2016 ... emerging drug-resistant pathogens in research programme around the world. This article reviews the history of antibiotics, different types of antibiotics, .... of the plasma membrane; these changes result in the loss of important ...

ORIGINAL ARTICLE

African Journals Online (AJOL)

User

(with and without its frailty) in Estimating Survival Time of Patients with Colorectal Cancer ..... ACKNOWLEDGMENT. This article is a part of research project approved ... rectal cancer survival trends in Norway 1958. –1997. European Journal of ...

Relative Citation Ratio (RCR): A New Metric That Uses Citation Rates to Measure Influence at the Article Level.

Science.gov (United States)

Hutchins, B Ian; Yuan, Xin; Anderson, James M; Santangelo, George M

2016-09-01

Despite their recognized limitations, bibliometric assessments of scientific productivity have been widely adopted. We describe here an improved method to quantify the influence of a research article by making novel use of its co-citation network to field-normalize the number of citations it has received. Article citation rates are divided by an expected citation rate that is derived from performance of articles in the same field and benchmarked to a peer comparison group. The resulting Relative Citation Ratio is article level and field independent and provides an alternative to the invalid practice of using journal impact factors to identify influential papers. To illustrate one application of our method, we analyzed 88,835 articles published between 2003 and 2010 and found that the National Institutes of Health awardees who authored those papers occupy relatively stable positions of influence across all disciplines. We demonstrate that the values generated by this method strongly correlate with the opinions of subject matter experts in biomedical research and suggest that the same approach should be generally applicable to articles published in all areas of science. A beta version of iCite, our web tool for calculating Relative Citation Ratios of articles listed in PubMed, is available at https://icite.od.nih.gov.

Relative Citation Ratio (RCR: A New Metric That Uses Citation Rates to Measure Influence at the Article Level.

Directory of Open Access Journals (Sweden)

B Ian Hutchins

2016-09-01

Full Text Available Despite their recognized limitations, bibliometric assessments of scientific productivity have been widely adopted. We describe here an improved method to quantify the influence of a research article by making novel use of its co-citation network to field-normalize the number of citations it has received. Article citation rates are divided by an expected citation rate that is derived from performance of articles in the same field and benchmarked to a peer comparison group. The resulting Relative Citation Ratio is article level and field independent and provides an alternative to the invalid practice of using journal impact factors to identify influential papers. To illustrate one application of our method, we analyzed 88,835 articles published between 2003 and 2010 and found that the National Institutes of Health awardees who authored those papers occupy relatively stable positions of influence across all disciplines. We demonstrate that the values generated by this method strongly correlate with the opinions of subject matter experts in biomedical research and suggest that the same approach should be generally applicable to articles published in all areas of science. A beta version of iCite, our web tool for calculating Relative Citation Ratios of articles listed in PubMed, is available at https://icite.od.nih.gov.

Identifying seminal papers in the Australasian Journal on Ageing 1982-2011: a Delphi consensus approach.

Science.gov (United States)

Parkinson, Lynne; Richardson, Kristy; Sims, Jane; Wells, Yvonne; Naganathan, Vasi; Brooke, Elizabeth; Lindley, Richard

2013-10-01

The aim of this study was to identify seminal Australasian Journal on Ageing papers published over 30 years through a Delphi consensus process. The main data collection was a three-round Delphi consensus study with 38 past and current members of the Australasian Journal on Ageing Editorial Board, Editorial Team and Management Committee. Three papers were agreed as top-ranking. One of the top-ranking articles was also highly cited. One article was published in the 1990 s, two in 2001. While it is difficult to judge how well the top-ranking papers represent seminal papers arising over 30 years, these papers do represent three different research strengths in Australasia, they do span three different disciplines, and they do reflect some of the diversity that characterises ageing research in Australasia over 30 years. © 2013 ACOTA.

Influence of Article Type on the Impact Factor of Dermatology Journals.

Science.gov (United States)

Rodríguez-Lago, L; Molina-Leyva, A; Pereiro-Ferreirós, M; García-Doval, I

2018-06-01

For scientific journals, achieving a high impact factor (IF) has become a goal in its own right. Our aim was to describe the influence of article type on the IF of dermatology journals. We used the Scopus database to calculate an IF for Actas Dermo-Sifiliográficas and the major dermatology journals, excluding articles without abstracts, letters to the editor, and conference proceedings. Included articles were classified into 4 categories: case reports, original articles, narrative reviews, and other. We also calculated the mean IF for each article type. We then compared our results with IFs published by the Institute for Scientific Information. The proportion of each type of article differed between journals. Original articles carried the greatest weight in the major journals (BJD, 76.8%; Contact, 81.1%; JAAD, 63.4%; JAMA Dermatol, 63.7%.) but not in Actas Dermo-Sifiliográficas, where only 31.7% were original research articles. A higher IF was associated with the publication of reviews and original articles; a lower IF was associated with the publication of case reports and other article types. Publishing case reports, which have lower citation rates, leads to a lower IF. Publishing reviews and original articles will lead to a higher IF. Journals that seek a higher IF should probably publish more reviews and original articles and fewer case reports. Editorial boards should seek a balance between the interests of their clinician readers and the journal's need for a higher IF. Copyright © 2018 AEDV. Publicado por Elsevier España, S.L.U. All rights reserved.

Neutron absorbing article

International Nuclear Information System (INIS)

Naum, R.G.; Owens, D.P.; Dooker, G.I.

1981-01-01

A neutron-absorbing article suitable for use in spent fuel racks is described. It comprises boron carbide particles, diluent particles, and a phenolic polymer cured to a continuous matrix. The diluent may be silicon carbide, graphite, amorphous carbon, alumina, or silica. The combined boron carbide-diluent phase contains no more than 2 percent B 2 O 3 , and the neutron-absorbing article contains from 20 to 40 percent phenol resin. The ratio of boron carbide to diluent particles is in the range 1:9 to 9:1

ORIGINAL ARTICLE

African Journals Online (AJOL)

User

One of the concerns among mothers for delivery is labor pain. There are various ... Journal of Medical and Biomedical Sciences (2017) 6(2): 11-16. © UDS Publishers ... ORIGINAL ARTICLE ..... effective than a placebo during the first stage of.

Review Article

African Journals Online (AJOL)