WorldWideScience

Sample records for apres traitement au

  1. Suivi après le traitement du cancer du sein

    Science.gov (United States)

    Sisler, Jeffrey; Chaput, Geneviève; Sussman, Jonathan; Ozokwelu, Emmanuel

    2016-01-01

    Résumé Objectif Offrir aux médecins de famille un résumé des recommandations fondées sur les données probantes pour guider les soins aux survivantes traitées pour le cancer du sein. Qualité des données Une recherche documentaire a été effectuée dans MEDLINE entre 2000 et 2016 à l’aide des mots-clés anglais suivants : breast cancer, survivorship, follow-up care, aftercare, guidelines et survivorship care plans, en se concentrant sur la revue des lignes directrices publiées récemment par les organismes nationaux de cancérologie. Les données étaient de niveaux I à III. Message principal Les soins aux survivantes comportent 4 facettes : surveillance et dépistage, prise en charge des effets à long terme, promotion de la santé et coordination des soins. La surveillance des récidives ne se traduit que par une mammographie annuelle, et le dépistage d’autres cancers doit suivre les lignes directrices basées sur la population. La prise en charge des effets à long terme du cancer et de son traitement aborde des problèmes courants tels la douleur, la fatigue, le lymphœdème, la détresse et les effets indésirables des médicaments, de même que les préoccupations à long terme comme la santé du cœur et des os. La promotion de la santé met en relief les bienfaits de l’activité chez les survivantes du cancer, avec l’accent mis sur l’activité physique. Les soins aux survivantes sont de meilleure qualité lorsque divers services et professionnels de la santé participent aux soins, et le médecin de famille joue un rôle important dans la coordination des soins. Conclusion Les médecins de famille sont de plus en plus souvent les principaux fournisseurs de soins de suivi après le traitement du cancer du sein. Le cancer du sein doit être considéré comme une affection médicale chronique, même chez les femmes en rémission, et les patientes profitent de la même approche que celle utilisée pour les autres affections chroniques en

  2. Profils des porteurs du VIH/SIDA au début du traitement ...

    African Journals Online (AJOL)

    But : Décrire les profils des porteurs de VIH/sida au début du traitement antirétroviral. Matériels et méthode: Les dossiers des porteurs du VIH/sida de la région maritime ont été analysés de mai 2008 à avril 2009 par le comité thérapeutique. Résultats: Parmi les 641 dossiers analysés, 67,40% venaient du district de Yoto.

  3. Le don après un décès d'origine cardiocirculatoire au Canada

    Science.gov (United States)

    Shemie, Sam D.; Baker, Andrew J.; Knoll, Greg; Wall, William; Rocker, Graeme; Howes, Daniel; Davidson, Janet; Pagliarello, Joe; Chambers-Evans, Jane; Cockfield, Sandra; Farrell, Catherine; Glannon, Walter; Gourlay, William; Grant, David; Langevin, Stéphan; Wheelock, Brian; Young, Kimberly; Dossetor, John

    2006-01-01

    Résumé Ces recommandations sont le fruit d'un processus multidisciplinaire national ayant duré un an et visant à déterminer si et comment l'on pourrait procéder au don d'organes après un décès d'origine cardiocirculatoire («don après le décès cardiocirculatoire», ou DDC) au Canada. Le forum national organisé en février 2005 a permis aux participants de discuter et d'élaborer des recommandations sur les principes, interventions et pratiques se rapportant au DDC. Les aspects éthiques et juridiques ont été abordés dans les discussions. À la fin du Forum, la majorité des participants ont été favorables à l'implantation de programmes de DDC au Canada. Les participants du Forum ont également convenu qu'il fallait formuler et prôner des valeurs fondamentales pour orienter l'élaboration de programmes et de protocoles basés sur le cadre médical, éthique et juridique établi lors de cette réunion. Même si la possibilité d'un don d'organes et de tissus doit faire partie intégrante des soins de fin de vie, il faut insister sur le fait que le devoir de diligence envers les patients mourants et leurs familles doit demeurer la priorité des équipes soignantes. La complexité et les répercussions profondes du décès sont reconnues et doivent être respectées, de même que les différences personnelles, ethnoculturelles et religieuses face à la mort et au don d'organes. Les décisions d'arrêter le traitement de maintien des fonctions vitales, la prise en charge des derniers moments de la vie et le diagnostic de décès selon des critères cardiocirculatoires doivent être distincts et indépendants des processus de don et transplantation. Ce rapport contient des recommandations destinées aux gestionnaires de program, aux autorités sanitaires régionales et aux instances appelés à élaborer les protocoles de DDC. Les programmes doivent être conçus en fonction des éléments suivants : direction et planification locales, éducation et

  4. Introduction au traitement mathématique des images méthodes déterministes

    CERN Document Server

    Bergounioux, Maïtine

    2015-01-01

    Ce cours est une introduction au traitement d'image mathématique déterministe. Les principales problématiques en traitement et analyse d’image y sont présentées: débruitage/filtrage/restauration, segmentation, rehaussement/défloutage, ainsi qu’un aperçu de quelques techniques d’acquisition. Les méthodes mathématiques utilisées ont essentiellement déterministes : transformation de Fourier, ondelettes, équations aux dérivées partielles, morphologie mathématique et méthodes variationnelles. Quelques applications y sont brièvement présentées pour illustrer le propos : la stéganographie, la compression et l’inpainting (ou désocclusion). Le livre comprend également un rappel des principales notions mathématiques utilisées (il se veut auto-suffisant) et la bibliographie abondante doit permettre au lecteur d’approfondir les techniques qui l’intéressent. Cet ouvrage s’adresse à des étudiants de MASTER, élèves-ingénieurs ou chercheurs désireux de comprendre ou d’approfond...

  5. Facteurs influençant l'initiation au traitement antirétroviral des personnes vivant avec le VIH dans les Centres de Traitement Agréés de Bamenda et de Bertoua au Cameroun

    Science.gov (United States)

    Mbopi-Keou, Francois-Xavier; Voundi, Esther Voundi; Kalla, Ginette Claude Mireille; Emah, Irène; Angwafo, Fru; Muna, Walinjom

    2014-01-01

    Introduction L'objectif de ce travail était de déterminer les facteurs influençant l'initiation au traitement antirétroviral des personnes vivant avec le VIH (PVVIH) dans les centres de traitements agrées (CTA) de Bamenda et de Bertoua au Cameroun. Méthodes Il s'agissait d'une étude transversale, analytique réalisée de Janvier à Avril 2011, dans les CTA de Bamenda et de Bertoua. Pour cette étude, nous avons obtenu une clairance éthique. Résultats Nous avons étudiés 460 dossiers de patients séropositifs en phase d'initiation au traitement antirétroviral dans les CTA de Bamenda et de Bertoua, 53,9% et 46,1% respectivement. L ‘âge médian était de 36 ans. La plupart des séropositifs à Bertoua (41) avaient fait un dépistage volontaire du VIH par rapport à ceux de Bamenda (22) (p= 0.008). Il y ‘avait plus de VIH de type 1 et 2 dans le CTA de Bamenda (15) par rapport à Bertoua (3) (p= 0.011). La majorité des patients était classé au stade clinique II à Bamenda (54,0%) tandis qu ‘à Bertoua le stade clinique III était prédominant (52,4%) (p = 0,000). Le taux médian de CD4 était de 133 cellules/mm3 dans le CTA de Bamenda et de 175 cellules/mm3 à Bertoua (p = 0,008). La Zidovudine était plus prescrit à Bamenda et le Ténofovir à Bertoua (p = 0,000). L ‘Efavirenz était plus prescrit à Bertoua tandis que la Névirapine l ‘était plus à Bamenda (p = 0,000). Le Lopinavir/r était plus prescrit à Bamenda qu ‘à Bertoua (p = 0,017). Conclusion Il apparait urgent de standardiser la prise en charge des PVVIH dans les CTA du Cameroun. PMID:25184023

  6. Evolution de films de cuivre sur un substrat de cordiérite au cours de traitements thermiques

    Science.gov (United States)

    Guille, Jean-Louis; Gondolf, Marc

    1993-04-01

    Copper films were applied on low sintering temperature cordierite substrates either by sputtering or screen printing. Their behaviour during thermal treatments was studied as a function of various parameters : deposition technique, thickness, firing atmosphere, physical state of the substrate (green or sintered). Films were most often broken during the treatment. In the case of screen printed films the effects of an oxydation-reduction cycle of copper are pointed out. Des films de cuivre ont été déposés sur un substrat de cordiérite à basse température de frittage par deux techniques, pulvérisation cathodique et sérigraphie. On étudie leur comportement au cours de traitements thermiques en fonction de différents paramètres : technique de déposition, épaisseur, atmosphère de traitement, état physique du substrat (cru ou fritté). On constate le plus souvent une fragmentation du film. Dans le cas des films sérigraphiés on met en évidence les effets dus à l'oxydation et à la réduction du cuivre.

  7. Signoles Aude, Le Hamas au pouvoir et après ?, Toulouse, Editions Milan, 2006.

    Directory of Open Access Journals (Sweden)

    Jean-François Legrain

    2007-11-01

    Full Text Available Dans les étroites limites imposées par la collection (absence totale de notes et de bibliographie, 112 p. en format réduit, le petit livre d’Aude Signoles, Le Hamas au pouvoir et après ?, commence à combler un vide de l’édition française. Le seul livre jusque là disponible en français et entièrement consacré à Hamas remonte à 7 années maintenant ; doté de nombreuses erreurs factuelles et faisant comme si Hamas était apparu avec l’autonomie des années 1990, il ignorait tout de son passé d’Ass...

  8. Une chaîne de traitement de l'information géographique au service de l'application de la loi Littoral

    Directory of Open Access Journals (Sweden)

    Patrick GUILLOPÉ

    1994-09-01

    Full Text Available L’application de la loi Littoral nécessitait une approche nouvelle de la part de l’État et la mise en œuvre d’outils nouveaux pour une gestion à long terme. L’apport de traitements automatiques de l’information géographique a été ainsi testé au CETE Normandie-Centre sur trois des grands principes posés par cette loi.

  9. Le traitement informatisé de ressources électroniques au Service de l'Information Scientifique du CERN

    CERN Document Server

    Pignard, Nathalie; Jerdelet, Jocelyne

    2001-01-01

    Nous présentons une méthode automatique d'importation de données mise en oeuvre au Service de l'Information Scientifique, SIS, du CERN. Ce programme informatique, baptisé Uploader, permet d'importer dans le catalogue de la bibliothèque du CERN des notices bibliographiques et le texte intégral de documents provenant de diverses sources sur Internet. Ces bases de données concernent la littérature grise en physique et dans les disciplines voisines (par exemple DOE, KEK, Math-Doc, TipTop, etc.). Cette politique d'acquisition, qui met en avant le traitement informatisé des ressources électroniques, soulève quelques réflexions sur l'augmentation du nombre de documents collectés et sur l'élargissement des domaines traités. Le souci constant d'enrichir ces données et d'en faciliter l'accès aux utilisateurs, sur un mode hypertextuel, conduit à une évolution des métiers de la gestion documentaire.

  10. Spectral Matrix Filtering Applied to Vsp Processing Application du filtrage matriciel au traitement des profils sismiques verticaux

    Directory of Open Access Journals (Sweden)

    Glangeaud F.

    2006-11-01

    ère peut être extraite après horizontalisation et application d'un filtrage matriciel avec une forte moyenne en fréquence. Ce traitement est alors équivalent à un filtrage en vitesse apparente classique. Le filtrage matriciel peut conduire à une séparation d'onde sans connaissance a priori sur la vitesse apparente des différentes ondes. Dans le domaine fréquentiel, une onde W(f peut s'écrire comme le produit d'une ondelette A(f par un vecteur normalisé S(f caractérisant la surface d'onde. Pour un modèle à deux ondes W1(f = A1(f S1(f et W2(f = A2(f S2(f, quatre cas sont possibles : a Si les amplitudes des deux ondes W1 et W2 sont identiques à toutes les fréquences et si les ondes sont orthogonales ( = 0, représente le produit scalaire; les deux ondes sont projetées sur les 2 premiers vecteurs de façon équipotente et la séparation est impossible. b Si les amplitudes des deux ondes W1 et W2 sont identiques à toutes les fréquences et si les ondes ont des vitesses apparentes très proches ( ~ 1; les deux ondes sont projetées sur le premier vecteur propre et la séparation est impossible. c Si les amplitudes des ondes W1 et W2 sont différentes à toutes les fréquences et si les ondes sont orthogonales ( = 0, la séparation est parfaitement bien réalisée, chaque onde se projetant sur un vecteur propre. d Si les ondes ont des amplitudes très différentes et des vitesses apparentes très proches ( ~1, la séparation est partiellement réalisée. L'onde de plus forte amplitude est projetée sur le premier vecteur propre. L'onde de plus faible amplitude est projetée partiellement sur le deuxième vecteur propre. Les amplitudes relatives de chaque onde ne sont pas conservées. Les cas (c et (d sont illustrés par des exemples synthétiques présentés en figures 3 et 4. L'application de la technique de filtrage matriciel est illustrée à l'aide de deux exemples. Le premier exemple montre des données sismiques obtenues dans un puits vertical avec un g

  11. A treatment station for solid radio-active waste at the Saclay nuclear research centre (1962); Station de traitement des dechets radioactifs solides au centre d'etudes nucleaires de Saclay (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Cerre, P; Mestre, E; Lebrun, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    The waste from an atomic centre is very varied in nature, in form, and in activity, going from weakly contaminated laboratory waste to objects actuated in a pile and strongly radioactive. After one year's working of a pilot plant, a factory has been built, in which solide waste is treated and then conditioned in concrete blocks. The present communication describes the treatment and conditioning techniques in this factory which uses to a maximum remotely controlled operation. (authors) [French] Les dechets d'un Centre Atomique sont de natures, de forme et d'activites extremement variees, allant des dechets de laboratoires faiblement contamines, aux dispositifs actives en pile et fortement radioactifs. Apres l'exploitation pendant un an d'une unite pilote, une usine a ete construite dans laquelle les dechets solides sont traites, puis conditionnes en bloc de beton. La presente communication a pour objet la description des techniques de traitement et de conditionnement dans cette usine ou les operations sont au maximum commandees automatiquement et a distance. (auteurs)

  12. Image processing. A system for the automatic sorting of chromosomes; Traitement d'images - Applications au classement des chromosomes

    Energy Technology Data Exchange (ETDEWEB)

    Najai, Amor

    1977-05-27

    The present paper deals with two aspects of the system: - an automata (specialized hardware) dedicated to image processing. Images are digitized, divided into sub-units and computations are carried out on their main parameters. - A software for the automatic recognition and sorting of chromosomes is implemented on a Multi-20 minicomputer, connected to the automata. (author) [French] Nous decrivons un systeme automatique de classification de chromosomes. Il se compose de: - l'A.S.T.I., Automate Specialise de Traitement d'Images permettant de numeriser celles-ci, d'isoler des sous-images, d'effectuer des calculs sur leurs parametres principaux. - Un programme de reconnaissance et de classification automatique des chromosomes implante sur un mini-ordinateur MULTI-20, couple a l'A.S.T.I. (auteur)

  13. Un système d'aide au traitement des informations de veille stratégique : concepts, méthode et résultats

    NARCIS (Netherlands)

    Rouibah, K.

    2001-01-01

    RÉSUMÉ Cette recherche s¿inscrit dans le cadre du traitement des informations fragmentaires et incertaines (IFI) de veille stratégique. Le traitement des IFI est un problème peu structuré, pour lequel il existe peu de recherches utiles aux dirigeants d¿entreprises. Devenu un axe de recherche assez

  14. Etude de l'anémie chez les enfants séropositifs au VIH naïfs au traitement antirétroviral à Lubumbashi, République Démocratique du Congo

    Science.gov (United States)

    Mwadianvita, Costa Kazadi; Ilunga, Eric Kasamba; Djouma, Jackson; Wembonyama, Cecile Watu; Mutomb, Florence Mujing A; Ekwalanga, Michel Balaka; Kabongo, Joe; Mundongo, Henri; Mupoya, Kalombo; Wembonyama, Stanis; Kalenga Mwenze, Prosper; Nkoy, Albert Mwembo-Tambwe A

    2014-01-01

    Introduction Beaucoup d'enfants infectés par le VIH arrivent à la consultation dans un état d'anémie. Notre objectif était d’évaluer la prévalence et le typage de l'anémie chez ces enfants. Méthodes C'est une étude transversale réalisée dans 3 centres de prise en charge des Personnes Vivant avec le VIH à Lubumbashi de Mai 2010 à Mai 2011. La population d’étude était de 152 enfants, âgés de 6 à 180 mois, naïfs au traitement antirétroviral. Les statistiques descriptives usuelles ont été utilisées. Résultats La prévalence globale de l'anémie (définie comme l'hémoglobine < 11g/dl) était de 69,1% (n=105) et 11,4% avaient une anémie sévère (Hg < 7,0 g/dl). Parmi eux, 16% ont été transfusés au moins 1 fois. L'anémie sévère était positivement associée au stade clinique de la maladie (p=0,02). L'anémie microcytaire était majoritaire dans les deux tranches d’âge. Elle était plus hypochrome chez les enfants en âge préscolaire soit 9,5% et plus normochrome en âge scolaire soit 15,2%. L'anémie normocytaire était plus normochrome dans les deux tranches d’âge soit 12,4% en âge préscolaire et 6,7% en âge scolaire. L'anémie macrocytaire était rare. Conclusion Environ sept enfants sur dix, âgés de moins de 15 ans infectés par le VIH naïfs au traitement antirétroviral dans notre milieu sont anémiques. L'anémie est corrélée à la sévérité de la maladie. Il est important d'associer une prise en charge nutritionnelle et corriger l'anémie avant une trithérapie antirétrovirale. PMID:25018796

  15. Intervention intégrée quant au risque de diabète après le diabète ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les femmes ayant souffert de diabète sucré de la grossesse, un diabète temporaire qui apparaît pendant la grossesse, présentent un risque élevé de développer le diabète de type 2 après leur grossesse. Cette étude de recherche abordera le problème en Afrique du Sud par l'intermédiaire d'une intervention novatrice au ...

  16. Processus de traitement de l'air t.1

    CERN Document Server

    Edipa

    2009-01-01

    Edition entièrement revue et actualisée du tome 1 de « L'intégrale de la Clim », consacré aux processus de traitement de l'air. Cet ouvrage qui comprend 224 pages (au lieu de 166 lors de la précédente édition), aborde d'une façon très pratique toutes les techniques mises en oeuvre pour traiter les caractéristiques physiques de l'air en fonction de la qualité de l'ambiance recherchée : habitat, locaux tertiaires, locaux industriels, salles propres, salles de spectacles, piscines, etc. Dans un premier temps sont présentées les propriétés physiques de l'air humide et l'ensemble de ses caractéristiques. Après avoir analysé les fonctions que l'on souhaite réaliser, le système aéraulique est choisi et les différents débits d'air sont calculés. Chaque traitement élémentaire (chauffage, refroidissement, humidification, déshumidification, filtration, atténuation acoustique, récupération de chaleur, etc.) est ensuite étudié. Les procédés de régulation sont aussi examinés. Un nouve...

  17. Radioactive Waste Control at the United Kingdom Atomic Energy Research Establishment, Harwell; Traitement des Dechets Radioactifs au Centre de Recherche sur l'Energie Atomique de Harwell; 041a 041e 041d 0422 0420 041e 041b 042c 0417 0410 0423 0414 ; Control de Desechos Radiactivos en el A.E.R.E., Harwell

    Energy Technology Data Exchange (ETDEWEB)

    Burns, R. H. [United Kingdom Atomic Energy Authority (United Kingdom)

    1960-07-01

    The paper outlines the present practices in the control and treatment of radioactive wastes at Harwell. The large-volume, low-level active liquid effluent is treated by phosphate coagulation methods and, eventually, discharged to the River Thames. The medium-level wastes are segregated and undergo a two-stage chemical treatment followed by passage through columns of Vermiculite. The latter process has been found to be effective in removing radoicaesium, which is not dealt with efficiently by the precipitation methods used. Liquid wastes with a high- activity content are stored and a new plant, incorporating chemical treatment, ion exchange and evaporation, is being installed. The chemical sludges formed in the treatment processes are dumped at sea after de-watering by filtration. The contaminated solid waste is either stored or disposed of at sea. It is important to reduce the volume as much as possible and the methods employed include pressure baling, melting and incineration of combustible matter. Small quantities of activity are discharged to the atmosphere through exhaust stacks. The cleaning of this discharge air is commonly achieved by the use of high-efficiency filters or liquid scrubbing systems. Regular stack monitoring is carried out and this is backed up by a comprehensive district sampling programme. (author) [French] L'auteur decrit les methodes de controle et de traitement des dechets radioactifs qui sont appliquees au Centre de Harwell. Le volume considerable des effluents liquides de faible activite est traite par des methodes de coagulation au moyen des phosphates, puis evacue dans la Tamise. Apres separation, les dechets d'activite moyenne sont soumis a un traitement chimique en deux temps, avant de traverser des colonnes de Vermiculite. On a constate que ce dernier processus eliminait le radio- cesium, ce que les methodes de precipitation utilisees ne permettent pas de faire de maniere efficace. Les dechets liquides d'activite intense sont

  18. Aspects descriptifs du VIH/SIDA chez les sujets âgés de 50 ans et plus suivis au Centre de Traitement Agréé de Bafoussam - Cameroun

    Science.gov (United States)

    Mbopi-Kéou, François-Xavier; Djomassi, Lucienne Dempouo; Monebenimp, Francisca

    2012-01-01

    Introduction La littérature scientifique dispose de très peu de données relatives à l’épidémiologie du VIH chez les sujets âgés en Afrique subsaharienne. Au Cameroun, les caractéristiques épidémiologiques de l'infection par le VIH chez les sujets âgés de 50 ans et plus ne sont pas documentées. Méthodes Dans une étude de cohorte rétrospective et une enquête transversale, nous avons comparé les caractéristiques clinico-biologiques et la survie post thérapeutique des patients âgés de 50 ans et plus, sous traitement antirétroviral au Centre de Traitement Agrée de Bafoussam - Cameroun, aux adultes plus jeunes. Résultats L’âge moyen était de 39 ans, les extrêmes étant 17 et 88 ans. Les sujets âgés de 50 ans et plus représentaient 14,1% des cas. Les plus âgés étaient moins bien informés sur les modes de transmission du virus (p = 0,04). Leur séropositivité au VIH était le plus souvent découverte au décours d'une infection opportuniste (p = 0,02). La fréquence de comorbidité était significativement plus élevée chez les personnes âgées de 50 ans et plus (p VIH. La promotion du dépistage et les programmes d’éducation sanitaire relatifs au VIH/SIDA devraient être renforcés au sein de cette communauté déjà affaiblie par le poids de l’âge, afin de réduire l'incidence du SIDA et de leur assurer prise en charge précoce. PMID:23133707

  19. Procédés de traitements des effluents de cave adaptés au secteur des vins biologiques : état des lieux et perspectives

    Directory of Open Access Journals (Sweden)

    Rochard Joël

    2017-01-01

    Full Text Available Au-delà des itinéraires viticoles et œnologiques, la viticulture biologique doit également s'intéresser aux difflérents aspects de la viticulture durable concernant notamment le traitement des effluents de cave, avec une approche écologique. Parallèlement à la performance d'épuration, le traitement des effluents doit intégrer difflérentes orientations écologiques : faible consommation d'énergie et limitation des déchets (boues de plus en plus difflicile à gérer par voie agronomique. En complément, en liaison avec le concept d'éco-oenotourisme, une intégration harmonieuse de dispositif peut être envisagée, qui associe à la fois une limitation des nuisances olfactives et sonores, une valorisation paysagère et de la biodiversité ainsi qu'éventuellement une réutilisation des eaux traitées pour l'irrigation. Les techniques de lits ou massifs plantés ont prouvé leur efflicacité dans le domaine de l'épuration des effluents d'origine domestique. Leur application aux effluents de cave qui fait l'objet de difflérentes recherches depuis plusieurs années, permet de valoriser l'environnement esthétique et écologique de la cave. L'objectif de la communication et de présenter le principe de l'épuration par lit planté de roseaux avec les difflérentes mises en œuvre envisageable au niveau des caves.

  20. Pharmacokinetic and pharmaco-technological approaches of actinides decorporation by an in vivo sequestering agent. Application to the development of new treatments; Approches pharmacocinetique et pharmacotechnique de la decorporation d'actinides par un agent complexant in vivo. Application a la mise au point de nouveaux traitements

    Energy Technology Data Exchange (ETDEWEB)

    Phan, G.

    2005-05-24

    induit une excretion de plus de 90% apres 16 jours du Pu injecte au rat tandis que le DTPA libre a la dose de 30 {mu}mol.kg{sup -1} ne produit que moins de 50% d'excrEtion du plutonium dans les memes conditions. De plus, l'administration hebdomadaire des SL-100nm permet de reduire significativement la retention du plutonium dans le foie a moins de 2% de l'activite injectee et celle dans le squelette a moins de 0, 2% et ce, au bout d'un mois apres la contamination. Toutes ces ameliorations seraient attribuees a l'augmentation de l'aire sous la courbe des concentrations en DTPA ainsi qu'a une distribution accrue du DTPA au foie et au squelette par les SL-100nm. Contrairement au DTPA administre sous forme libre, les liposomes SL-100nm seraient capables d'interagir a la fois avec les macrophages et les hepatocytes au niveau du foie, d'intercepter le plutonium et de prevenir le depot de l'actinide au niveau du squelette dans notre modele de contamination chez le rat. La vectorisation liposomale et les etudes de pharmacocinetique offrent donc la possibilite d'optimiser le traitement de dEcorporation du Pu par le DTPA

  1. Radioactive Waste Facilities at the Australian Atomic Energy Commission Research Establishment; Installations pour le Traitement des Dechets Radioactifs au Centre de Recherche de la Commission Australienne a l'Energie Atomique; 0423 0421 0422 0414 ; Dispositivos para Evacuacion de Desechos Radiactivos en el Centro de Investigaciones de la Australian Atomic Energy Commission

    Energy Technology Data Exchange (ETDEWEB)

    Berglin, C. L.W.; Keher, L. H.; Miles, G. L.; Wilson, A. R.W. [Australian Atomic Energy Commission Research Establishment, Lucas Heights, Sydney, NSW (Australia)

    1960-07-01

    'impuretes fertiles (appliquant un procede calcium-fer-phosphate) et de bassins de retenue. Le memoire examine les diverses methodes de concentration des impuretes et de traitement secondaire qui sont actuellement a l'etude. Les auteurs etudient la formule d'evacuation et la dilution probable dans le Woronora, et decrivent un essai de dilution qui a ete effectue dans les eaux touchees par la maree. On se propose d'enfouir, le cas echeant apres empaquetage, tous les dechets solidesi de faible activite. Les auteurs etudient le choix et l'emplacement de la zone d'elimination. Ils font un expose sur la construction d'une installation destinee au stockage et a l'elimination de dechets solides a activite elevee. On envisage l'e vaporation et le stockage des dechets liquides a activite moyenne et elevee. Le memoire donne des renseignements detailles sur les depenses d'equipement et d'exploitation afferentes a l'usine de traitement des effluents et a d'autres installations pour le traitement des dechets. (author) [Spanish] La memoria describe las instalaciones previstas para la recogida, tratamiento y evacuacion de los desechos radiactivos en Lucas Heights, en relacion con las cantidades que se produciran segun los calculos. Los efluentes de baja actividad se dividen en tres tipos: a) Aguas de las cloacas, b) Desechos de funcionamiento, provenientes de la torre de refrigeracion del reactor, de los talleres mecanicos y otras zonas no activas, c) Efluentes de los laboratorios y otras zonas activas. La planta de tratamiento para los efluentes del ultimo tipo consiste en principio en tanques de mezcla y dosificacion de alcali, un clarificador de lodos (que emplea un sistema a base de calcio - herro - fosfato) y tanques receptores. Se estan estudiando metodos para concentrar los lodos y metodos de tratamiento secundario, que se discuten en la memoria. La memoria estudia la forma de descarga y el grado de dilucion que se espera obtener en el rio Woronora, asi como un experimento de dilucion que se

  2. Epidémiologie et facteurs de risque des complications respiratoires majeures après chirurgie de l'aorte abdominale au CHU Ibn Sina, Maroc

    Science.gov (United States)

    Awab, Almahdi; Elahmadi, Brahim; Lamkinsi, Tarik; El Moussaoui, Rachid; El Hijri, Ahmed; Azzouzi, Abderrahim; Alilou, Mustapha

    2013-01-01

    Introduction L'incidence des complications respiratoires postopératoires (CRPO) reste très diversement appréciées selon les critères diagnostiques retenues dans les différentes études, ce qui la fait varier de 5 à plus de 50%. Les CRPO majeurs après chirurgie de l'aorte abdominale sont responsables d'une grande morbi-mortalité pouvant aller jusqu’à 36%, d'une durée d'hospitalisation et d'un coût plus importants. Ainsi dans l'optique d'améliorer notre prise en charge périopératoire de la chirurgie de l'aorte, nous avons décidé de mener une étude pour dresser le profil épidémiologique et déterminer les facteurs de risque des complications respiratoires dans notre contexte Méthodes Il s'agit d'une étude de cohorte rétrospective du mois de Janvier 2007 au mois de décembre 2011 portant sur l'ensemble des patients opérés pour pathologie aortique au bloc opératoire central de l'hôpital Ibn Sina de Rabat, Maroc. Résultats Cent vingt cinq patients ont été inclus dans notre étude, 24 patients ont été opérés pour anévrysme de l'aorte abdominale et 101 patients pour lésion occlusive aortoiliaque. Dans notre série 22 malades soit 17,6% ont présenté une complication respiratoire majeure avec, une reventilation dans 4,8% des cas, une difficulté de sevrage de la ventilation artificielle dans 3,2% des cas, une pneumopathie dans 4% des cas, un syndrome de détresse respiratoire aigue (SDRA) dans 4% des cas et une nécessité de fibroaspiration bronchique dans 1,6% des cas. En analyse univariée: l’âge, la présence d'une BPCO avec dyspnée stade 3 ou 4, la présence d'une anomalie à l'EFR préopératoire, la présence d'un stade avancé (III ou IV) de LOAI et la reprise chirurgicale étaient statistiquement associés à la survenue d'une complication respiratoire postopératoire. En analyse multivariée, seule une anomalie à l'EFR en préopératoire constituait un facteur de risque indépendant de survenue d'une complication

  3. Disposal of the radioactive effluents at the 'Commissariat a l'Energie Atomique'. Treatment leading to evacuation into a river; Probleme du rejet des residus radioactifs liquides au CEA. Traitements aboutissant a des rejets en riviere

    Energy Technology Data Exchange (ETDEWEB)

    Duhamel,; Menoux,; Candillon, [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    loaded water, 10) Impot elements other than Sr{sup 90} are also studied. (author) [French] Le probleme du traitement des residus radioactifs liquides au CEA est envisage sous l'angle du rejet ultime en riviere dans des conditions optima permettant de satisfaire aux Normes de la protection. 2) A Saclay, ou l'on ne dispose que d'un etang ou l'eau ne se renouvelle pas, les liquides epures sont envoyes par camion citerne a Fontenay-aux-Roses, ou ils sont deverses provisoirement - dans les egouts - en attendant qu'un point de rejet en Seine ait ete determine. 3) Au Bouchet, les eaux residuaires de l'Usine de traitement de minerais d'urano-thorianite devront etre traitees en deux temps de facon a separer le radium dans une premiere phase, ce qui facilitera l'epuration au cours de la deuxieme phase. 4) En vue des futurs rejets a Marcoule, une etude a ete conduite a Saclay, sur des effluents synthetiques - type Marcoule - ayant pour but de mettre au point des procedes d'elimination selective du Sr d'une part, du Cs d'autre part, par coprecipitation. 5) Dans le cas general du rejet ultime en riviere, les problemes suivants sont successivement envisages: - predilution entre les bassins de stockage des eaux epurees et le fleuve; - mode d'injection dans le fleuve; - dilution dans le fleuve (etude prealable par traceurs); - evolution de l'activite dans les eaux du fleuve (adsorption par les organismes inertes ou vivants, contamination des berges); - incidence sur le choix d'un site; - dilution isotopique. 6) Ce dernier probleme est specialement detaille. 7) La teneur de l'eau en un element donne conditionne la dilution isotopique de son isotope radioactif. L'analyse decelant une carence, il est possible d'y suppleer par des rejets d'isotope stable. 8) Cette methode conduit en certains cas a des analyses delicates (en particulier dans le cas du {sup 90}Sr), la teneur en isotope stable necessaire a une forte dilution isotopique restant faible (ce qui est d'ailleurs un avantage). 9

  4. Treatment of Radioactive Effluents at the Saclay Nuclear Research Centre; Traitement des Effluents Radioactifs au Centre d'Etudes Nucleaires de Saclay; 041e 0414 ; Tratamiento de los Efluentes Radiactivos en el Centro de Energia Nuclear de Saclay

    Energy Technology Data Exchange (ETDEWEB)

    Wormser, G. [Service de Controle des Radiations et de Genie Radioactif, Commissariat a l' Energie Atomique, Saclay (France)

    1960-07-01

    The Report Gives The Account Of Four Years' Experience In Operating The Treatment Plant For Effluents From The Saclay Nuclear Research Centre. It Contains Data Relating To The Origin, Volume And Treatment Of Waste. (author) [French] Ce rapport presente un bilan d'exploitation de l'installation de traitement des effluents du Centre d'etudes nucleaires de Saclay depuis quatre ans. On donne des chiffres concernant l'origine des residus, leur volume, leur traitement. (author) [Spanish] El autor hace un balance de explotacion de la instalacion de tratamiento de efluentes del centro de Saclay desde hace cuatro anos, dando las cifras correspondientes al origen de los residuos, a su volumen y a su tratamiento. (author) [Russian] V jetom dokumente podvoditsja itog chetyrehletnej jekspluatacii ustanovki po obrabotke zhidkih othotov v Centre jadernyh issledovanij v Sakle. V doklade privodjatsja dannye o proishozhdenii othodov, jh ob'eme i obrabotke. (author)

  5. Émissions azotées au champ et performances des machines lors de l'épandage de boues issues du traitement des eaux usées

    OpenAIRE

    Pradel, M.; Pacaud, T.; Cariolle, M.

    2011-01-01

    / Ce document est un rapport de synthèse des travaux réalisés dans le cadre du projet Ecodefi sur l'estimation des émissions azotées lors de l'épandage de boues issues du traitement des eaux usées en lien avec les performances technologiques des machines utilisées à cet effet.

  6. Traitement de surface par explosif du cuivre polycristallin : caractérisation microstructurale et comportement en fatigue plastique

    Science.gov (United States)

    Gerland, M.; Dufour, J. P.; Presles, H. N.; Violan, P.; Mendez, J.

    1991-10-01

    A new surface treatment technique with a primary explosive deposited in thin layer was applied to a polycrystalline pure copper. After treatment, surface roughness remains of high quality especially when compared to shot peened surfaces. The treated zone extends over several hundreds microns in depth and the microhardness profile exhibits a significant increasing of hardness with a maximum reaching 100% at the surface. The transmission electron microscopy shows a microstructure which changes with depth : below the surface, there is a thin recrystallized layer with very small grains followed by a region with numerous mechanical twins the density of which decreases when depth increases. Tested in fatigue with a constant plastic strain amplitude, the treated copper specimens exhibit a strong hardening from the first cycles compared to the untreated specimen ; however this initial hardening erases after 2% of the fatigue life. The fatigue resistance is not modified by the treatment. Une nouvelle technique de traitement de surface à l'aide d'un explosif primaire déposé en couche mince a été utilisée sur du cuivre pur polycristallin. L'état de surface après traitement reste de très bonne qualité, surtout comparé aux surfaces grenaillées. La zone traitée s'étend sur une profondeur de quelques centaines de microns et le profil de microdureté montre une importante augmentation de dureté avec un maximum en surface pouvant atteindre 100%. La micrcrostructure, observée par microscopie électronique en transmission, est caractérisée par une fine recristallisation en surface, puis par un abondant maclage dont la densité décroît lorsque la profondeur augmente. Testé en fatigue à déformation plastique imposée, le cuivre traité présente un fort écrouissage initial dès les premiers cycles, mais qui s'efface progressivement au cours du cyclage après 2% de la durée de vie, cette dernière n'étant pas modifiée par le traitement.

  7. Etude des facteurs liés à l'observance au traitement antirétroviral chez les patients suivis à l'Unité de Prise En Charge du VIH/SIDA de l'Hôpital de District de Dschang, Cameroun

    Science.gov (United States)

    Mbopi-Kéou, François-Xavier; Dempouo Djomassi, Lucienne; Monebenimp, Francisca

    2012-01-01

    Introduction Etudier les facteurs liés à l'observance au traitement antirétroviral chez les patients adultes suivis à l'Unité de Prise en Charge du VIH/SIDA (UPEC) de l'hôpital de District de Dschang. Méthodes Dans une étude descriptive transversale conduite à l'hôpital de District de Dschang, l'observance a été évaluée sur la base des déclarations des patients et sur la régularité du renouvellement de leurs ordonnances (observance calculée). Résultats Parmi les 389 patients répondant à nos critères d'inclusion, 356 ont été interrogés. La durée moyenne du suivi était de 27 mois. La moyenne d’âge était égale à 41 ans et le sexe ratio 2,46 en faveur du sexe féminin. Le statut sérologique était découvert pour 60,56% des patients à l'occasion d'un épisode maladif. Le niveau d'observance déclarée était significativement plus élevé que le niveau global de l'observance calculée (80,2% vs 51,5%, p<10−5). Les deux principales barrières à l'observance étaient l'oubli et le travail. Les patients référés dans cette UPEC étaient moins bien observants (p<10−4). L'observance au traitement antirétroviral était d'autant meilleure quand le taux de CD4 en début de traitement était élevé (p= 0,01) et que la durée du traitement était prolongée (p=0,00). Conclusion La discordance observée entre les résultats des deux méthodes utilisées pour estimer l'observance, tout en soulévant les contraintes liées à l’évaluation de l'observance thérapeutique, souligne l'importance des méthodes biologiques. Les facteurs individuels se sont avérés être les principales raisons de non-observance. Enfin, un accent devrait être mis sur les consultations d’éducation thérapeutique et le suivi psycho-social des patients sous traitement antirétroviral dans cette UPEC. PMID:22937195

  8. Study of the aqueous chemical treatment of uranium zirconium fuels; Etude du traitement chimique des combustibles uraniumzirconium par voie seche

    Energy Technology Data Exchange (ETDEWEB)

    Bourgeois, M; Nollet, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    A dry process has been studied for separating the uranium from the zirconium-either for recovering the enriched uranium from fuel element production waste, or with a view to treating this waste after irradiation. In this process the alloy is treated with hydrochloric acid at 400 deg. C in a fluidized corundum bed which causes the zirconium to volatilize as tetrachloride and the uranium to form the trichloride. This latter is then converted to the hexafluoride by attack with fluorure. After the laboratory tests, a first pilot plant with a capacity of 1 kg of alloy was tried out at the Fontenay-aux-Roses Nuclear Research Centre; this made it possible to fix the operational conditions for the process. An industrial scale plant was then built with the collaboration of the from Kuhlmann, and operated until a satisfactory process had been developed for treating the waste. This installation treats 3 kg/h of alloy with a yield for the hydrochloric acid of about 50 per cent and with a uranium loss in the zirconium tetrachloride of about 0.1 per cent. An active pilot plant capable of treating of treating a few kilos of irradiated alloy is now being studied. (authors) [French] On a etudie un procede de voie seche pour effectuer la separation de l'uranium et du zirconium - soit en vue de la recuperation de l'uranium enrichi contenu dans les dechets de fabrication des elements combustibles - soit en vue du traitement de ceux-ci apres irradiation. Ce procede consiste a attaquer l'alliage par l'acide chlorhydrique a 400 deg. C dans un lit fluidise de corindon, ce qui a pour effet de volatiliser le zirconium sous forme de tetrachlorure et de transformer l'uranium en trichlorure. Ce dernier est ensuite converti en hexafluorure par action du fluor. Apres des essais de laboratoire, un premier pilote a l'echelle de 1 kg d'alliage a ete experimente au Centre d'Etudes Nucleaires de Fontenay-aux-Roses et a permis de determiner les conditions operatoires du procede. En collaboration avec

  9. Arthropathie destructrice des epaules au cours d�une acromegalie

    Directory of Open Access Journals (Sweden)

    Nessrine Akasbi

    2011-10-01

    Full Text Available L�acromegalie est une maladie endocrinienne rare, en rapport avec une hypersecretion d�hormone de croissance. Elle a des consequences rhumatologiques: l�arthropathie peripherique, l�atteinte rachidienne et les syndromes canalaires. L�atteinte articulaire accompagne une acromegalie active, sa survenue apres un traitement radical et une remission complete est rare. Nous presentons le cas d�une patiente de 70 ans ayant un antecedent d�acromegalie sur adenome hypophysaire il y a 25 ans, traitee chirurgicalement et declaree en remission complete, a developpe une arthropathie destructrice des deux epaules. Le but de notre observation est de mettre le point sur la possibilite d�une atteinte articulaire au cours de l�acromegalie et de son retentissement fonctionnelle.

  10. La chronologie du royaume de Qatabân du Ier siècle avant J.-C. au Ier siècle après J.-C.

    Directory of Open Access Journals (Sweden)

    Mounir Arbach

    2002-04-01

    Full Text Available Les nouvelles découvertes archéologiques et épigraphiques de ces dernières années, effectuées au cours des fouilles franco-italiennes à Tamna`, l'ancienne capitale du royaume de Qatabân, permettent d'établir une nouvelle chronologie des souverains de Qatabân entre le Ier siècle avant J.-C. et le Ier siècle après J.- C.The chronology of the kingdom of Qatabân, from the 1st century BC to the 1st century AD. Archaeological and epigraphical discoveries made in recent years by the Franco-Italian excavations at Tamna`, the ancient capital of the kingdom of Qatabân, allows us to establish a new chronology for the kings of Qatabân during the 1st century BC and the 1st century AD.

  11. Mise au point

    African Journals Online (AJOL)

    chyme parotidien après injection du produit de contraste. (Fig.2) chez l'enfant qui avait un carcinome muco- épidermoïde. ... injection de produit de contraste (B). Tous nos malades ont eu un traitement chirurgical. Celui- .... Ces hémangiomes sont généralement de type capillaire, pouvant avec le temps, subir une régression ...

  12. Acces au traitement anticancereux au Togo (access to treatment of ...

    African Journals Online (AJOL)

    Among the 18 patients with a chemotherapy prescription, two did not initiate treatment due to lack of money and 13 have paid the treatment by themselves with a credit or a mortgage. Each patient receive a prescription of 5 to 10 cycles of chemotherapy and the mean cost of each regimen was >300 000 FCFA. About two ...

  13. Resultat du traitement d'un craniopharyngiome kystique par de la ...

    African Journals Online (AJOL)

    Introduction Le craniopharyngiome est une tumeur bénigne qui provient de nids épithéliaux ou de zones de métaplasies squameuses liées à l'embryogenèse hypophysaire. Touchant surtout l'enfant, peut être potentiellement agressive et caractérisée par un taux élevé de récidive après traitement chirurgical. La bléomycine ...

  14. Thermal cycling behaviour and thermal stability of uranium-molybdenum alloys of low molybdenum content; Comportement au cyclage thermique et stabilite thermique des alliaces uranium-molybdene de faibles teneurs en molybdene

    Energy Technology Data Exchange (ETDEWEB)

    Decours, J; Fabrique, B; Peault, O [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    traitements de cyclage thermique ont ete faits a 550, 575, 600 et 625 deg C pendant 1000 cycles et les traitements de longues durees a 550, 575, 600 et 625 deg C pendant 2000 heures (4000 h a 625 deg C). L'alliage a 0,5 pour cent presente une bien meilleure tenue au cyclage thermique que l'uranium non-allie, toutefois ce comportement est nettement moins bon que celui des alliages de teneurs superieurs a 1 pour cent meme a 550 deg C; cette tenue s'ameliore par traitement thermique d'affinage du grain. A partir de l'alliage a 1,1 pour cent, la tenue au cyclage est tres bonne meme a 625 deg C et va en s'ameliorant jusqu'a 3 pour cent. Une montee de la temperature jusqu'a la phase {beta} a peu d'inconvenient a condition d'etre suivie d'un refroidissement rapide (50 a 100 deg /mn). Le grain {alpha} est fin, la phase {gamma} est sous forme nodulaire, et le comportement au cyclage thermique est bon. Si ce refroidissement est lent (15 deg /h), la grain {alpha} est grossier et le comportement au cyclage thermique est identique a celui de l'alliage a 0,5 pour cent. Les traitements de longue duree ont montre une bonne stabilite du grain {alpha} apres 2000 heures de maintien a 575, 600 et 625 deg C et apres 4000 heures a 625 deg C. Un cyclage thermique effectue apres ces traitements change tres peu le comportement au cyclage de ces alliages. (auteurs)

  15. Evaluation du traitement antirétroviral chez les femmes enceintes VIH-1 positif, sur la transmission de l'infection de la mère à l'enfant: cas du Centre Médical Saint Camille de Ouagadougou, au Burkina Faso

    Science.gov (United States)

    Soubeiga, Serge Theophile; Compaore, Rebecca; Djigma, Florencia; Zagre, Nicaise; Assengone, Elsa; Traore, Lassina; Diarra, Birama; Bisseye, Cyrille; Ouermi, Djeneba; Sagna, Tani; Karou, Simplice; Pietra, Virginio; Simpore, Jacques

    2015-01-01

    Introduction L'infection au VIH chez les nouveau-nés par leur mère peut être réduite grâce à des programmes de prévention de transmission mère-enfant du VIH (PTME). L'objectif dans cette étude était d’évaluer le traitement antirétroviral chez les femmes enceintes VIH-1 positif sur la transmission mère-enfant de l'infection au Centre Médical Saint Camille de Ouagadougou, Burkina Faso. Méthodes Des échantillons de spot de sang total ont été collectés chez 160 enfants âgés de 6 semaines, nés de mères VIH-1 positif et chez 40 enfants âgés de 2 à 13 mois provenant d'orphelinats et dont les mères étaient inconnues. Ces échantillons ont été testés avec le kit Abbott Real Time HIV-1 Qualitative. Un questionnaire a permis de connaitre les âges et les fonctions des femmes enceintes. Résultats Les femmes enceintes avaient un âge moyen global de 29,50±5,19 ans. Au total, 50,5% (101/200) ont été mises sous combinaison AZT/3TC/NVP et 29,5% (59/200) étaient sous prophylaxie (AZT/3TC). Le taux de transmission verticale du VIH-1 était de 0,0% (0/160) (p VIH-1 de la mère à l'enfant. De plus, le dépistage par PCR, des enfants orphelins infectés verticalement par le VIH, permet leur prise en charge thérapeutique précoce. PMID:26301003

  16. Antenna Pattern Range (APR)

    Data.gov (United States)

    Federal Laboratory Consortium — TheAntenna Pattern Range (APR)features a non-metallic arch with a trolley to move the transmit antenna from the horizon to zenith. At the center of the ground plane,...

  17. Application de la théorie des graphes au traitement de la carte géologique Applying the Theory of Graphs to the Treatment of Geological Maps

    Directory of Open Access Journals (Sweden)

    Bouillé F.

    2006-11-01

    Full Text Available La saisie des informations d'une carte géologique par les méthodes classiques (grilles ou relevés aléatoires de courbes ne constitue pas une base de données opérationnelle. Par contre, l'assimilation des limites géologiques à un graphe orienté répond aux critères d'optimalité (encombrement très réduit, temps minimal, fiabilité, et permet une digitalisation rationnelle de la carte, une bonne structuration du fichier, et la réalisation d'applications intéressantes : restitutions graphiques sélectives à toutes échelles, calculs de pendages, surfaces, volumes, études de corrélation. Nous avons donc établi une chaîne de traitement de la carte géologique dont chaque maillon (saisie des informations; contrôle, mise à jour, consultation, application opère sur un ou plusieurs graphes. Obtaining data from geological maps by conventional methods (grids or random curve plotting is not an operational data base. However, the comparison of geological boundaries with a directional graph meets criteria of optimalness (very small bulk, minimum time, reliability and makes it possible to digitize the map rationally, to structure the file properly and to achieve significant applications such as selective graph plotting on all scales, calculating dips, areas and volumes, and making correlotion analyses. Therefore, we worked out a geological map processing sequence in which each element (data acquisition, checking, updating, consulting, applications operates on one or several graphs.

  18. Technical and Economic Problems Associated with the Development of Methods of Processing and Using Radioactive Waste; Problemes techniques et economiques lies au developpement des methodes de traitement et d'utilisation des dechets radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L; Sauteron, J; Oger, C [Commissariat a l' Energie Atomique, Fontenay-Aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    The paper briefly reviews the various techniques used in processing the radioactive wastes which unavoidably result from the generation of electric power from nuclear sources. The paper goes on to define the relative importance, in nuclear fuel cycles, of the problem raised by these wastes. Emphasis is placed on the economic influence of management policies on the cost of power generation, and hence on the relative position of nuclear energy. A substantial percentage of these wastes can be economically utilized. Attention is drawn to the major technical and economic features of the industry which will come into being as a result of this utilization. The major uses anticipated are discussed: radiation sources, heat sources, auxiliary power generation. The paper concludes that satisfactory solutions have already been found to these problems, and describes possible improvements. (author) [French] La communication rappelle d'abord succinctement les differentes techniques de traitement des dechets radioactifs resultant necessairement de la production d'electricite d'origine nucleaire. On situe ensuite l'importance du probleme pose par ces residus dans le cycle du combustible nucleaire. On fait ressortir l'influence economique du choix des methodes de gestion sur le cout de production de l'energie, et par consequent sur la place devolue a l'energie nucleaire. Une part importante de ces dechets peut faire l'objet d'une utilisation rentable de l'industrie qui naitra de cette utilisation. Les principales applications envisagees sont evoquees: sources d'irradiation, sources chauffantes, generateurs auxiliaires d'energie. On conclut que d'ores et deja des solutions satisfaisantes ont ete apportees a ces problemes, et l'on decrit les perspectives d'amelioration concevables. (auteur)

  19. Risk Analysis of Flare Flame-out Condition in a Gas Process Facility Analyse des risques des conditions d’extinction de torche au sein d’une installation de traitement de gaz

    Directory of Open Access Journals (Sweden)

    Zadakbar O.

    2011-02-01

    Full Text Available Flaring is a common method of disposal of flammable waste gases in the downstream industries. Flare flame out (flame lift-off or blow-outs often occurs causing toxic vapors to discharge. The toxic gases released may have hazardous effects on the surrounding environment. To study the effect of inhalation exposure of these toxic gases on human health, the four steps of the EPA (Environmental Protection Agency framework with the field data to quantify the cancer and non-cancer health risks are integrated in this paper. As a part of exposure assessment, gas dispersion modeling using AERMOD and UDM-PHAST is applied in two different conditions of normal flaring and flare flame out during a particular climate condition in Khangiran region. Recommendations to avoid flare flame out conditions are also presented here. Le torchage est un procédé courant d’élimination des gaz résiduaires inflammables dans les industries de traitement. L’extinction de la torche (par décollage ou soufflage de flamme provoque souvent une émission de vapeurs toxiques. Ces gaz toxiques libérés peuvent présenter des effets dangereux sur le milieu environnant. Pour étudier l’effet d’une exposition par inhalation de ces gaz toxiques sur la santé, cet article croise les quatre étapes de la démarche de l’EPA (Environmental Protection Agency, Agence de protection de l’environnement avec les données d’exploitation afin de quantifier le risque sanitaire cancérologique et non cancérologique. Dans le cadre de l’estimation d’exposition, une modélisation de dispersion des gaz utilisant AERMOD et UDM-PHAST est évaluée dans deux configurations différentes de torchage normal et d’extinction de torche à l’occasion de conditions climatiques particulières dans la région du Khangiran. L’article propose également des recommandations destinées à éviter les conditions d’une extinction de flamme de torche.

  20. Influence des traitements thermiques et de la microstructure sur les phénomènes de découplage dans les composés au bismuth

    Science.gov (United States)

    Nicolas, M.; Guyen van Huong, C. N.; Burger, J. P.; Dubon, A.; Fitoussi, J. P.; Laval, J. Y.

    1991-11-01

    a.c. susceptibility measurements and 3D electronic microscopy observation were carried out on three Bi-compounds (2212 and 2223). Depending on the annealing conditions, one observes lamellar-type materials organized either in a more or less dense structure of fine particles or in very large slabs. The a.c. susceptibility signals allow to separate the intergranular from the intragranular effects. The combined results obtained by both techniques lead us to conclude that the intergranular and the intragranular decoupling, induced by magnetic fields are of same nature, i.e. occur at the (BiO)2 slab. Nous avons couplé des mesures de susceptibilité altemative et d'observation au microscope électronique en 3D sur trois échantillons supraconducteurs au bismuth (2212 et 2223). Selon les conditions de recuit, on observe des matériaux de type lamellaire, organisés soit en une structure plus ou moins dense de fines particules, soit en larges plaquettes. L'étude des signaux de susceptibilité alternative χ' et χ'' permet de séparer les effets intergranulaires des effets intragranulaires. les résultats combinés des deux techniques nous ont conduit à conclure que les deux types de découplage (inter et intragranulaires), induits par les champs magnétiques sont de même nature, c'est-à-dire se produisent au niveau des bicouches (BiO)2.

  1. Computer processing of {gamma} spectra. Application to the dosage of mixed natural or artificial radioelements; Traitement par ordinateur des spectres {gamma}. Application au dosage de melanges de radioelements naturels ou artificiels

    Energy Technology Data Exchange (ETDEWEB)

    Coulomb, R; Goldsztein, M; Schiltz, J C [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1965-07-01

    A program, written in Fortran II for IBM 7034 II, permitting resolution by means of least squares of a mixture of natural or artificial radioelements, is described. The spectra are processed in measurement batches, making up a homogeneous study, which comprise standards and samples. This highly versatile program may either ensure the processing of a great number of daily analyses, or be used pending development of radiochemical methods. The feeding of data has been simplified as much as possible. On the contrary, at the outlet, the numerical or graphical controls, error computations, and the printing of results in clear and legible form have been multiplied. In spite of this, the calculation times are exceedingly short. Several independent studies which include about sixty spectra may be processed in less than five minutes. (authors) [French] On decrit un programme, redige en Fortran H, pour IBM 7094 H, permettant la resolution par les moindres carres d'un melange de radioelements naturels ou artificiels. Les spectres sont traites par groupe de mesures, constituant une etude homogene, comprenant etalons et echantillons. Ce programme, extremement souple, peut, soit repondre a une production journaliere importante d'analyses, soit etre utilise en periode de mise au point de methodes radiochimiques. L'introduction des donnees a ete simplifiee au maximum. Au contraire, a la 'sortie', on a multiplie les controles numeriques ou graphiques, les calculs d'erreur, les impressions de resultats sous une forme aussi claire et lisible que possible. Malgre cela, les temps de calculs sont extremement brefs, plusieurs etudes independantes comportant une soixantaine de spectres peuvent etre traitees en moins de 5 minutes. (auteurs)

  2. Technical and Administrative Considerations in the Management of Radioactive Wastes; Considerations Techniques et Administratives Relatives au Traitement des Dechets Radioactifs; 0422 0415 0425 041d 0418 0427 0415 0421 041a 0414 ; Aspectos Tecnicos y Administrativos de la Manipulacion de Desechos Radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Wolman, Abel [Johns Hopkins University, Baltimore, MD (United States); Division of Reactor Development, U.S. Atomic Energy Commission, Washington, DC (United States); Lieberman, Joseph A. [Environmental and Sanitary Engineering Branch, Division of Reactor Development, U.S. Atomic Energy Commission, Washington, DC (United States)

    1960-07-01

    administratifs du traitement des dechets en rattachant cette analyse aux mesures qu'il pourrait etre necessaire de prendre dans l'avenir pour assurer un traitement et un controle efficaces, sur le plan administratif et juridique, des effluents radioactifs resultant de la production d'energie atomique. Les auteurs repartissent tout d'abord en de larges categories les differentes sortes de dechets pour bien souligner que le probleme de leur traitement presente de multiples aspects et qu'on ne saurait en donner une solution unique. Ils examinent rapidement le role des differents milieux dans le choix des methodes de traitement des dechets et definissent les procedes fondamentaux de controle (dilution et dispersion, concentration et confinement). Les auteurs distinguent entre les normes fondamentales de protection radiologique et les criteres de fonctionnement qui doivent etre fixes pour realiser le controle des effluents de facon a veiller a ce que les normes fondamentales soient respectees. Les auteurs examinent les progres realises en matiere de normes et criteres ainsi que l'application de ceux-ci dans l'etablissement de reglements de sante et de securite et la mise au point de procedures administratives et juridiques. A cet egard, ils signalent les avantages que presente, du point de vue de l'opinion publique et du travail administratif, l'utilisation la plus large des textes legislatifs et des procedures administratives dans les services deja crees aux divers echelons de l'autorite. Malgre l'importance des depenses qu'entrainent le traitement et l'elimination des dechets radioactifs, le cout par unite d'energie electrique produite ne represente qu'une partie relativement restreinte du cout total par unite d'energie. Les auteurs indiquent d'autres facteurs economiques qui jouent un role dans la manipulation et l'elimination des dechets, notamment en fonction de l'emplacement de l'usine et du point d'evacuation. En outre, ils examinent d'autres aspects du traitement des dechets

  3. Complications du traitement traditionnel des fractures : aspects ...

    African Journals Online (AJOL)

    Tous les patients reçus avec des complications du traitement traditionnel des fractures ont été inclus dans ce travail. Le diagnostic des lésions était clinique et radiologique. Nous avions reçu 51 patients porteurs de complications suite à des traitements de médecine traditionnelle, soit 13,7% du total des patients hospitalisés ...

  4. Bitumen coating of the radio-active sludges from the effluent treatment plant at the Marcoule centre. Review of the progress reports 1, 2, 3 and 4 (1963); Enrobage par le bitume des boues radioactives de la station de traitement des effluents du centre de Marcoule. Mise au point des etats d'avancement 1, 2, 3 et 4. (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J.; Lefillatre, G.; Scheidhauer, J. [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1963-07-01

    Besides the very high activity liquids containing fission products, the chemical treatment of irradiated fuels produces a large volume of aqueous effluents and solid waste of relatively low radioactivity. These weakly active products can be eliminated in the ground, in a hydrographic land system or in the sea. Techniques of evaporation, of resin concentration, and of coprecipitation give rise to inorganic sludges with a high water content. All these residues occupy a large volume and represent a far from negligible weight. In the case of the sludge, their relative fluidity necessitates a conditioning guaranteeing safe storage. The solution to the problem will consist in passing directly from a liquid or a suspension, to a solid whose structure is homogeneous and whose matter is inert with respect to the storage medium (soil, sea, etc. ). We have proposed to coat the radioactive products with bitumen. This article is designed to give a review of the studies undertaken on this method. It consists of a progress report rather than a final assessment. (authors) [French] En dehors des liquides de tres haute activite contenant des produits de fission, le traitement chimique des combustibles irradies produit un volume important d'effluents aqueux et de residus solides de radioactivite relativement faible. Ces produits, faiblement actifs, peuvent etre elimines dans le sol, dans un systeme hydrographique terrestre ou dans la mer. Les techniques d'evaporation, de concentration sur resine, de coprecipitation, permettent la decontamination prealable des liquides. La coprecipitation donne naissance a des boues minerales dont la teneur en eau est elevee. Tous ces residus occupent un volume important et representent un poids non negligeable. Dans le cas des boues, leur fluidite relative exige un conditionnement donnant toutes garanties de securite au stockage. La solution du probleme consistera a passer directement d'un liquide ou d'une suspension a un solide

  5. Bitumen coating of the radio-active sludges from the effluent treatment plant at the Marcoule centre. Review of the progress reports 1, 2, 3 and 4 (1963); Enrobage par le bitume des boues radioactives de la station de traitement des effluents du centre de Marcoule. Mise au point des etats d'avancement 1, 2, 3 et 4. (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Rodier, J; Lefillatre, G; Scheidhauer, J [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1963-07-01

    Besides the very high activity liquids containing fission products, the chemical treatment of irradiated fuels produces a large volume of aqueous effluents and solid waste of relatively low radioactivity. These weakly active products can be eliminated in the ground, in a hydrographic land system or in the sea. Techniques of evaporation, of resin concentration, and of coprecipitation give rise to inorganic sludges with a high water content. All these residues occupy a large volume and represent a far from negligible weight. In the case of the sludge, their relative fluidity necessitates a conditioning guaranteeing safe storage. The solution to the problem will consist in passing directly from a liquid or a suspension, to a solid whose structure is homogeneous and whose matter is inert with respect to the storage medium (soil, sea, etc. ). We have proposed to coat the radioactive products with bitumen. This article is designed to give a review of the studies undertaken on this method. It consists of a progress report rather than a final assessment. (authors) [French] En dehors des liquides de tres haute activite contenant des produits de fission, le traitement chimique des combustibles irradies produit un volume important d'effluents aqueux et de residus solides de radioactivite relativement faible. Ces produits, faiblement actifs, peuvent etre elimines dans le sol, dans un systeme hydrographique terrestre ou dans la mer. Les techniques d'evaporation, de concentration sur resine, de coprecipitation, permettent la decontamination prealable des liquides. La coprecipitation donne naissance a des boues minerales dont la teneur en eau est elevee. Tous ces residus occupent un volume important et representent un poids non negligeable. Dans le cas des boues, leur fluidite relative exige un conditionnement donnant toutes garanties de securite au stockage. La solution du probleme consistera a passer directement d'un liquide ou d'une suspension a un solide dont la structure

  6. Disposal of the radioactive effluents at the 'Commissariat a l'Energie Atomique'. Treatment leading to evacuation into a river; Probleme du rejet des residus radioactifs liquides au CEA. Traitements aboutissant a des rejets en riviere

    Energy Technology Data Exchange (ETDEWEB)

    Duhamel; Menoux; Candillon [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    to find out in loaded water, 10) Impot elements other than Sr{sup 90} are also studied. (author) [French] Le probleme du traitement des residus radioactifs liquides au CEA est envisage sous l'angle du rejet ultime en riviere dans des conditions optima permettant de satisfaire aux Normes de la protection. 2) A Saclay, ou l'on ne dispose que d'un etang ou l'eau ne se renouvelle pas, les liquides epures sont envoyes par camion citerne a Fontenay-aux-Roses, ou ils sont deverses provisoirement - dans les egouts - en attendant qu'un point de rejet en Seine ait ete determine. 3) Au Bouchet, les eaux residuaires de l'Usine de traitement de minerais d'urano-thorianite devront etre traitees en deux temps de facon a separer le radium dans une premiere phase, ce qui facilitera l'epuration au cours de la deuxieme phase. 4) En vue des futurs rejets a Marcoule, une etude a ete conduite a Saclay, sur des effluents synthetiques - type Marcoule - ayant pour but de mettre au point des procedes d'elimination selective du Sr d'une part, du Cs d'autre part, par coprecipitation. 5) Dans le cas general du rejet ultime en riviere, les problemes suivants sont successivement envisages: - predilution entre les bassins de stockage des eaux epurees et le fleuve; - mode d'injection dans le fleuve; - dilution dans le fleuve (etude prealable par traceurs); - evolution de l'activite dans les eaux du fleuve (adsorption par les organismes inertes ou vivants, contamination des berges); - incidence sur le choix d'un site; - dilution isotopique. 6) Ce dernier probleme est specialement detaille. 7) La teneur de l'eau en un element donne conditionne la dilution isotopique de son isotope radioactif. L'analyse decelant une carence, il est possible d'y suppleer par des rejets d'isotope stable. 8) Cette methode conduit en certains cas a des analyses delicates (en particulier dans le cas du {sup 90}Sr), la teneur en isotope

  7. Automation on computer of the partial area method in the analysis of resonances induced by 'S' neutrons 2. with an interference term and extension of the method to the treatment of multi resonances (1963); Automatisation sur ordinateur de la methode des aires partielles dans l'analyse des resonances induites par les neutrons ''S''. 2, avec terme d'interference et extension de la methode au traitement des multiresonances (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, G; Corge, C R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    This report deals with the numerical analysis on an I.B.M. 7090 computer of transmission resonances induced by 's' wave neutrons in time of flight experiments. The analysis method used is the partial area one. In this second part the interference term is taken into account. Modifications have been made in the programs and subroutines described in the first part, to determine the resonant transmissions from experimental raw data, and the relating partial areas. Also programs and subroutines are thoroughly described, which estimate the resonance parameters. The field of the partial area method has been extended to cover the case where several resonances have to be treated simultaneously, provided they do not interfere. (authors) [French] Le pretent rapport a pour objet l'analyse numerique sur ordinateur I.B.M. 7090 des resonances dues aux neutrons ''s'' dans les experiences de transmission par temps de vol, la methode d'analyse utilisee etant la methode dea aires partielles. Dans cette deuxieme partie il a ete tenu compte du terme d'interference. On y trouvera une description des amenagements apportes aux programmes et sous-programmes decrits dans la premiere partie pour determiner les transmissions interfero-resonnantes a partir des donnees experimentales brutes et les aires partielles afferentes. Sont egalement decrits les programmes et sous-programmes necessaires au calcul des parametres caracteristiques des resonances. Le domaine d'application de la methode a ete etendu au traitement simultane de plusieurs resonances groupees n'interferant pas entre elles. (auteurs)

  8. Resultats visuels et complications apres chirurgie de la cataracte ...

    African Journals Online (AJOL)

    Resultats visuels et complications apres chirurgie de la cataracte: cas de l' Hopital Ophtalmologique Saint Andre de Tinre au nord-Benin. K.M. Amedome, C.R.A. Assavedo, M Aboudou, K Vonor, N Maneh, K Nonon Saa, K Dzidzinyo, K.D. Ayena, M Banla, K Balo ...

  9. Procédé de traitement d'une ressource fluide, programme d'ordinateur et module de traitement associés

    OpenAIRE

    Rapaport, Alain; Rousseau, Antoine; Harmand, Jérôme

    2014-01-01

    Pour la bio-remédiation de ressources en eau (bassins, lacs..) qui nécessitent d’être traitées par une unité externe de purification à l’aide de bioprocédés, l’invention consiste à mettre en place un réseau « intelligent » de pompes qui s’adaptent au cours du temps à l’hydrodynamique et à la pollution du milieu. L’objectif est d’optimiser la durée du traitement et/ou la qualité de la remédiation.

  10. Appendicite aigue non compliquée: y a-t- il une place pour le traitement conservateur

    Science.gov (United States)

    El Khader, Ahmed; Lahkim, Mohamed; El Barni, Rachid; Achour, Abdessamad

    2015-01-01

    Le but de cette étude a été d’évaluer l'efficacité de l'antibiothérapie seule dans le traitement des appendicites aigues non compliquées. C'est une étude prospective, intéressant 68 patients ayant eu une appendicite aigue simple, de confirmation radiologique, traités par l'amoxicilline associée à l'acide clavulanique pendant 10 jours. L'appendicectomie a été réalisée en cas d'aggravation ou en cas de non amélioration au bout de 48heures de traitement. Le traitement conservateur a été efficace dans 82,35% avec une résolution complète des symptômes chez 56 patients. Les 12 cas restants (17,65%) ont subit une appendicectomie. l'appendicite a été gangréneuse dans 8 cas et phlegmoneuse dans 4 cas. Cinq des 56 patients, qui ont bien évolué sous traitement conservateur, ont été réadmis et opérés pour récidive, soit 8,9%. Deux cas ont eu une appendicite compliquée. L'appendicectomie reste le traitement de référence pour l'appendicite aigue, mais le traitement antibiotique peut être proposé en première intension à des patients présentant une appendicite aigue non compliquée. PMID:26327981

  11. ParticipACTION, cinq ans après sa relance : enquête quantitative sur son rayonnement et sur le pouvoir d'action des organisations au Canada en matière d’initiatives consacrées à l’activité physique

    Directory of Open Access Journals (Sweden)

    Guy Faulkner

    2018-01-01

    Full Text Available Introduction. ParticipACTION est un organisme canadien relancé en 2007 dédié à la communication et au marketing social en matière d’activité physique. Cette étude porte sur le pouvoir d'action des organismes canadiens dans l'adoption, la mise en oeuvre et la promotion des initiatives en ce domaine. Nos objectifs étaient de comparer les résultats de base (2008 avec les résultats de suivi (2013 en ce qui concerne (1 la connaissance de ParticipACTION, (2 la capacité d'un organisme à adopter, à mettre en oeuvre et à promouvoir des initiatives d’activité physique et (3 les différences potentielles en matière de pouvoir d'action d'une organisation en fonction de sa taille, de son secteur et de son mandat ainsi que (4 d’évaluer la perception de ParticipACTION cinq ans après sa relance. Méthodologie. Dans le cadre de cette étude transversale, des représentants d’organismes locaux, provinciaux, territoriaux et nationaux ont rempli un questionnaire en ligne visant à évaluer la capacité de leur organisme à adopter, à mettre en oeuvre et à promouvoir des initiatives d’activité physique. Nous avons utilisé des méthodes de statistique descriptive et des analyses de variance à un facteur pour répondre à nos objectifs. Résultats. Le taux de réponse correspondant aux personnes ayant ouvert le courriel d’invitation à répondre au sondage et ayant consenti à y participer était de 40,6 % (685/1 688. Au total, 540 questionnaires de sondage ont été remplis. Le taux de connaissance de ParticipACTION, qui se chiffrait à 54,6 % lors de l’étude initiale, avait atteint 93,9 % au moment du suivi (objectif 1. Tant les résultats initiaux que les résultats de suivi ont fait état d’un pouvoir d'action important des organismes dans l'adoption, la mise en oeuvre et la promotion d'initiatives d’activité physique (objectif 2, avec cependant de légères variations en fonction du secteur et du mandat de chaque

  12. Vingt ans après…

    Directory of Open Access Journals (Sweden)

    François Burgat

    2002-05-01

    Full Text Available Le dixième numéro des Chroniques Yéménites, publié vingt ans après la création du Centre Français d'Archéologie et de Sciences Sociales de Sanaa reflète des ambitions souvent exprimées: donner une chance aux jeunes chercheurs et couvrir un large éventail disciplinaire au service de l'affirmation de la vocation régionale du Centre. Depuis Sanaa ou Paris, chercheurs, doctorants ou stagiaires, de l'Ecole normale supérieure, de l'INALCO, de l'Université de Sanaa et de bon nombre d'institu...

  13. Respirators: APR Issuer Self Study 33461

    Energy Technology Data Exchange (ETDEWEB)

    Chochoms, Michael [Los Alamos National Laboratory

    2016-07-13

    Respirators: APR Issuer Self-Study (course 33461) is designed to introduce and familiarize employees selected as air-purifying respirator (APR) issuers at Los Alamos National Laboratory (LANL) with the responsibilities, limitations, procedures, and resources for issuing APRs at LANL. The goal is to enable these issuers to consistently provide proper, functioning APRs to authorized users

  14. Profils des enfants infectes par le vih en debut du traitement ...

    African Journals Online (AJOL)

    But : Décrire les profils des enfants infectés par le VIH au début du traitement antirétroviral. Matériels et méthode: Les dossiers des enfants infectés par le VIH dans la région maritime ont été analysés de mai 2008 à février 2010 par le comité thérapeutique. Résultats: Parmi les 96 dossiers analysés, 66,67% venaient du ...

  15. Traitement des diagraphies acoustiques. Première partie : application de techniques issues de l'intelligence artificielle au pointe des diagraphies acoustiques Full Waveform Acoustic Data Processing. Part One: an Artificial Intelligence Approach for the Picking of Waves on Full-Waveform Acoustic Data

    Directory of Open Access Journals (Sweden)

    Mari J. L.

    2006-11-01

    Full Text Available Les enregistrements des données acoustiques en champ total (fuit waveform ont conduit le géophysicien et le diagraphiste à utiliser des techniques de traitement du signal pour séparer les différentes ondes observées sur les enregistrements. L'une des tâches importantes du traitement des diagraphies acoustiques est le pointé des temps d'arrivée des différentes ondes enregistrées. Une démarche de type système expert a été utilisée pour mettre au point un algorithme multicanaux qui réalise le pointé des différentes ondes, à l'aide de règles faisant intervenir les caractéristiques ou attributs de chaque onde. Une onde est caractérisée par sa vitesse, sa fréquence, son amplitude et sa cohérence latérale. L'algorithme fournit un ensemble de logs accompagnés d'une estimation de la dispersion des mesures à chaque cote profondeur. Les logs fournis sont les logs de lenteur et les logs de fréquence. Les résultats obtenus sur un ensemble de diagraphies acoustiques enregistrées dans un puits vertical du Bassin parisien montrent que la dispersion des mesures reste faible en comparaison des pas d'échantillonnage en temps et profondeur. Les logs de dispersion peuvent aussi permettre de détecter des phénomènes physiques tels que caves, fractures, conversions d'ondes ou interférences, reliés à la lithologie. Dans une deuxième partie, nous montrerons différentes techniques de séparation d'ondes. La troisième partie illustrera, sur un cas particulier, l'utilisation des logs issus des diagraphies acoustiques pour caractériser les formations. The full waveforms recorded by an array of recievers in a borehole sonic tool contain a set of waves that can be fruitfully used to obtain detailed information about the nearborehole lithology and structure. The different waves that can be observed by full-waveform sonic data are described in this article. The main tools used in the recording of full-waveform data are then reviewed

  16. Construction of an apparatus for measuring the low-temperature thermal conductivity before and after neutron irradiation. Application to uranium dioxide (1963); Realisation d'un appareil pour la mesure de la conductibilite thermique a basse temperature avant et apres irradiation neutronique. Application au dioxyde d'uranium (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Bethoux, O [Commisariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1963-09-15

    An apparatus has been studied and built which makes it possible to alternatively irradiate a sample at room temperature in the reactor 'Melusine' at the Grenoble Nuclear Research Centre, and to measure its thermal conductivity between 20 and 100 deg. K in perfect safety. The results obtained on UO{sub 2} have made it possible on the one hand to check experimentally that the spin-phonon diffusion leads to a thermal resistance independent of temperature above 30 deg. K, and on the other hand to propose a simple theory which takes into count the role played by the damage due to U-235 fission products in the decrease of thermal conductivity after irradiation. (author) [French] Un appareil permettant alternativement d'irradier un echantillon a temperature ambiante dans le reacteur ''Melusine'' du C.E.N.G., et de mesurer sa conductibilite thermique entre 20 et 100 deg. K en toute securite, a ete etudie et construit Les resultats obtenus sur UO{sub 2} ont permis, d'une part, de verifier experimentalement que la diffusion spin-phonon conduit a une resistance thermique independante de la temperature au-dessus de 30 deg. K, et, d'autre part, de proposer une theorie simple tenant compte du role joue par les degats dus aux produits de fission de l'uranium 235, dans la deterioration de la conductibilite thermique apres irradiation. (auteur)

  17. Programming list processes. SLIP: symmetric list processor - applications; Le traitement de listes en programmation. SLIP: langage de listes symetrique - applications

    Energy Technology Data Exchange (ETDEWEB)

    Broudin, Y [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1966-06-01

    Modern aspects of programming languages are essentially turned towards list processing. The ordinary methods of sequential treatment become inadequate and we must substitute list processes for them, where the cells of a group have no neighbourhood connection, but where the address of one cell is contained in the preceding one. These methods are required in 'time sharing' solving problems. They also allow us to treat new problems and to solve others in the shortest time. Many examples are presented after an abstract of the most usual list languages and a detailed study of one of them : SLIP. Among these examples one should note: locating of words in a dictionary or in a card index, treatment of non numerical symbols, formal derivation. The problems are treated in Fortran II on an IBM 7094 machine. The subroutines which make up the language are presented in an appendix. (author) [French] La programmation moderne ne se satisfait plus des methodes classiques de traitement sequentiel ni des tableaux a positions de memoire contigues. Elle tend a generaliser les methodes de listes ou les cellules d'un groupe n'ont pas de relation de voisinage, mais sont enchainees en listes, l'une donnant l'adresse machine de l'autre. Ces methodes sont indispensables en 'partage de temps' et dans les traitements en 'temps reel'. De plus, elles permettent de traiter des problemes nouveaux et d'optimiser le temps de traitement de nombreux autres. De nombreux exemples sont traites, apres un resume des langages les plus utilises et une etude plus precise d'un langage de listes: SLIP. Parmi les exemples traites signalons la recherche lexicographique, le traitement de symboles alphanumeriques, la derivation formelle. Probleme traite en Fortran II sur IBM 7094. Les sous-programmes constitutifs du langage sont fournis en annexe. (auteur)

  18. The determination by irradiation with a pulsed neutron generator and delayed neutron counting of the amount of fissile material present in a sample; Determination de la quantite de matiere fissile presente dans un echantillon par irradiation au moyen d'une source pulsee de neutrons et comptage des neutrons retardes

    Energy Technology Data Exchange (ETDEWEB)

    Beliard, L; Janot, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    A preliminary study was conducted to determine the amount of fissile material present in a sample. The method used consisted in irradiating the sample by means of a pulsed neutron generator and delayed neutron counting. Results show the validity of this method provided some experimental precautions are taken. Checking on the residual proportion of fissile material in leached hulls seems possible. (authors) [French] Ce rapport rend compte d'une etude preliminaire effectuee en vue de determiner la quantite de matiere fissile presente dans un echantillon. La methode utilisee consiste a irradier l'echantillon considere au moyen d'une source puisee de neutrons et a compter les neutrons retardes produits. Les resultats obtenus permettent de conclure a la validite de la methode moyennant certaines precautions. Un controle de la teneur residuelle en matiere fissile des gaines apres traitement semble possible. (auteurs)

  19. Le domaine des co-infections et des maladies concomitantes du Réseau canadien pour les essais VIH des IRSC : lignes directrices canadiennes pour la prise en charge et le traitement de la co-infection par le VIH et l’hépatite C chez les adultes

    Science.gov (United States)

    Hull, Mark; Giguère, Pierre; Klein, Marina; Shafran, Stephen; Tseng, Alice; Côté, Pierre; Poliquin, Marc; Cooper, Curtis

    2014-01-01

    HISTORIQUE : De 20 % à 30 % des Canadiens qui vivent avec le VIH sont co-infectés par le virus de l’hépatite C (VHC), lequel est responsable d’une morbidité et d’une mortalité importantes. La prise en charge du VIH et du VHC est plus complexe en raison de l’évolution accélérée de la maladie hépatique, du choix et des critères d’initiation de la thérapie antirétrovirale et du traitement anti-VHC, de la prise en charge de la santé mentale et des toxicomanies, des obstacles socioéconomiques et des interactions entre les nouvelles thérapies antivirales à action directe du VHC et les antirétroviraux OBJECTIF : Élaborer des normes nationales de prise en charge des adultes co-infectés par le VHC et le VIH dans le contexte canadien. MÉTHODOLOGIE : Le Réseau canadien pour les essais VIH des Instituts de recherche en santé du Canada a réuni un groupe d’experts possédant des compétences cliniques en co-infection par le VIH et le VHC pour réviser les publications à jour ainsi que les lignes directrices et les protocoles en place. Après une vaste sollicitation afin d’obtenir des points de vue, le groupe de travail a approuvé des recommandations consensuelles, qu’il a caractérisées au moyen d’une échelle de qualité des preuves fondée sur la classe (bienfaits par rapport aux préjudices) et sur la catégorie (degré de certitude). RÉSULTATS : Toutes les personnes co-infectées par le VIH et le VHC devraient subir une évaluation en vue de recevoir un traitement du VHC. Les personnes qui ne sont pas en mesure d’entreprendre un traitement du VHC devraient être soignées pour le VIH afin de ralentir l’évolution de la maladie hépatique. La norme de traitement du VHC de génotype 1 est un régime comprenant de l’interféron pégylé et de la ribavirine dosée en fonction du poids, associés à un inhibiteur de la protéase du VHC. Pour les génotypes 2 ou 3, une bithérapie classique est recommandée pendant 24 semaines s

  20. DIAGRAMME TRC ET STRUCTURES DE TREMPE ET DE REVENU D'UN ACIER FAIBLEMENT ALLIE AU MANGANESE-CHROME

    Directory of Open Access Journals (Sweden)

    Z LAROUK

    2008-06-01

    Full Text Available Cette étude concerne un acier faiblement allié au manganèse et chrome. L’utilisation principale de cet acier est la fabrication des tubes sans soudure, employés pour le forage ou le transport pétrolier. Les tubes traités thermiquement doivent supporter d’importantes contraintes de tension et de compression, sans risque de rupture. Les tubes trempés à l’eau souffrent d’une hétérogénéité structurale impliquant une diminution de dureté à la surface interne. Le but de cette étude est de déterminer les structures de l’acier après différents types de traitements, au cours de refroidissement continus dans les conditions industrielles de trempe (930°C et de revenu (670°C. Les résultats montrent que la vitesse critique de trempe est de 50°C/sec et, pour éviter la formation de la ferrite, une vitesse plus grande que 12°C/sec est nécessaire. Cet acier a une bonne trempabilité (11mm. La décroissance de la dureté de la martensite revenue est remarquable lorsque la température atteint 600°C.

  1. La tuberculose iléo-caecale : à propos de deux cas au CHU ...

    African Journals Online (AJOL)

    Le traitement antituberculeux instauré était conforme au protocole du programme national burkinabè de lutte contre la tuberculose. L'évolution a été favorable dans les deux cas. Mots clés: tuberculose - jonction iléocaécale - traitement antituberculeux - chirurgie. English Abstract. The ileo-caecal tuberculosis is rare and ...

  2. Decontamination of irradiated-fuel processing waste using manganese dioxide hydrate; Decontamination des effluents de traitement des combustibles irradies par le bioxyde de manganese hydrate

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J M; Gaudier, J F [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1969-07-01

    The 'manganese dioxide' process is designed to replace the 'calcium carbonate' treatment for low and medium activity wastes. The objective to attain during the research for a new process was the diminution of the volume of the sludge without decreasing the decontamination factor of the wastes. The new process involves addition in series of twice over 100 ppm of Mn{sup 2+} in the waste which has previously been made basic and oxidizing; the precipitate formed in situ is separated after each addition. The process has the advantage of increasing the decontamination of strontium. The treatment can be used in a plant including two decantation units and has given effective results when applied in such a plant. (author) [French] Le procede au ''bioxyde de manganese'' est destine a remplacer le traitement ''carbonate de calcium'' dans les effluents de moyenne activite. L'objectif poursuivi lors de la recherche d'un procede nouveau etait de diminuer le volume des boues sans diminuer le facteur de decontamination des effluents. Le nouveau traitement consiste a effectuer en cascade sur les effluents rendus basiques et oxydants une double precipitation de 100 ppm de Mn{sup 2+} avec separation intermediaire du precipite. Il presente en outre l'avantage d'ameliorer la decontamination en strontium. Le traitement est utilisable dans la chaine des deux decanteurs et a donne satisfaction lors de son exploitation industrielle. Le volume des boues seches a ete reduit d'un facteur 3 a 4 par rapport au traitement carbonate. (auteur)

  3. Diagnostic Strategy in APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dongyoung; Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-05-15

    These features may bring out changes in operator tasks, changing the characteristics of tasks, or creating new tasks. Diagnostic strategy for identifying anomaly may be different especially in APR1400 from that in the analog control room due to the change of human-system interface, i.e. alarm system and display system. Since the first plant of APR1400 is being built at this moment, it is not known what strategies the operators will adopt in diagnosis tasks in the new operating environment. In this light, this paper aims at investigating operator's diagnostic strategies which are appropriate for APR1400. In order to collect data, several different approaches which are complementary are used to identify diagnostic strategies in the digital control room: analysis on audio/video recording of operation, observation in the simulator, and interview with the operators. The result shows that the digital control room introduces new strategies in the diagnosis, compared with the analog control room, and also changed the characteristics of strategies, mostly, by getting more support from the computerized system. This paper investigated how the digitalized control room may influence operator's diagnostic strategies. Several different approaches, i. e., audio/video record, observation of training, and the interview with operators, were used to gather information about the operator's behaviors. As a conclusion, this paper figured out that the digital control room introduces new strategies in the diagnosis, compared with the analog control room, and also changed the characteristics of the strategies, mostly, by getting more support from the computerized system. The operators interviewed also commented that the diagnosis in the APR1400 is quicker, more correct, and easier, compared with the analog control room.

  4. Diagnostic Strategy in APR1400

    International Nuclear Information System (INIS)

    Kim, Dongyoung; Kim, Jonghyun

    2013-01-01

    These features may bring out changes in operator tasks, changing the characteristics of tasks, or creating new tasks. Diagnostic strategy for identifying anomaly may be different especially in APR1400 from that in the analog control room due to the change of human-system interface, i.e. alarm system and display system. Since the first plant of APR1400 is being built at this moment, it is not known what strategies the operators will adopt in diagnosis tasks in the new operating environment. In this light, this paper aims at investigating operator's diagnostic strategies which are appropriate for APR1400. In order to collect data, several different approaches which are complementary are used to identify diagnostic strategies in the digital control room: analysis on audio/video recording of operation, observation in the simulator, and interview with the operators. The result shows that the digital control room introduces new strategies in the diagnosis, compared with the analog control room, and also changed the characteristics of strategies, mostly, by getting more support from the computerized system. This paper investigated how the digitalized control room may influence operator's diagnostic strategies. Several different approaches, i. e., audio/video record, observation of training, and the interview with operators, were used to gather information about the operator's behaviors. As a conclusion, this paper figured out that the digital control room introduces new strategies in the diagnosis, compared with the analog control room, and also changed the characteristics of the strategies, mostly, by getting more support from the computerized system. The operators interviewed also commented that the diagnosis in the APR1400 is quicker, more correct, and easier, compared with the analog control room

  5. Les séquelles de brûlures cervicales: aspects épidémiologique, clinique et thérapeutique au Maroc

    Science.gov (United States)

    Rafik, Amine; Chabak, Hakim; Diouri, Mounia; Bahechar, Naïma; Chlihi, Abdessamad

    2015-01-01

    Les séquelles de brûlures cervicales représentent une entité fréquente des séquelles de brûlure, elles affectent la fonction, l'esthétique et l’état psychologique des patients et peuvent être de traitement difficile. Il s'agit d'une étude rétrospective étalée sur 5 ans de Mars 2009 au Octobre2014, réalisée au centre national des brûlés et de chirurgie plastique au CHU Ibn Rochd Casablanca. Nous avons analysé les caractéristiques épidémiologiqueset cliniques ainsi que les indications et les résultats thérapeutiques chez 300 patients présentant des rétractions cervicales post-brûlure, suivis dans notre formation. Les jeunes femmes étaient le plus souvent touchées (56%). la brûlure thermique par flamme de butane dans le cadre d'accident domestique était l’étiologie la plus fréquente (91%).75% des patients ont été pris en charge dans un délai de 18 mois après avoir présenté une incapacité fonctionnelle. Les brides cervicales modérées et sévères sont les plus fréquentes et représentent respectivement 60% et 16% des cas. Le traitement chirurgical a fait appel aux greffes cutanées dans 67%des cas, aux plasties locales dans 24%des cas et aux lambeaux dans 24% des cas, les résultats sont jugés bons dans 75%des cas et moyens dans 18% des cas, tandis que les cas restants (7%) ont nécessité une reprise chirurgicale. Le traitement des brides cervicales doit être associé à un programme de rééducation adapté, afin d'assurer la pérennité des résultats fonctionnels et esthétiques. PMID:26301017

  6. Experimental Design: Application to the Development of a Treatment to Inhibit the Deposition of Barium Sulfate Liable to Be Formed in Enhanced Oil Recovery by Waterflooding Planification d'expériences : application à la mise au point d'un traitement inhibiteur du depôt de sulfate de baryum susceptible de se former en récupération assistée du pétrole par injection d'eau

    Directory of Open Access Journals (Sweden)

    Roque C.

    2006-11-01

    Full Text Available For technical and economic reasons, waterflooding is the most widely-used method in enhanced oil recovery [1]. In many situations, unfortunately, the formation water is incompatible with the injection water. The deposits and corrosion induced by the various reactions of this incompatibility cause irreversible damage, which is especially dangerous for the reservoir rock and the downhole and surface production facilities. This study is concerned exclusively with barium sulfate deposits liable to occur in surface production facilities by the mixing of injection water loaded with sulfate (1300 mg. 1 to the power of (-1 with a formation water with a high barium concentration (1200 mg. 1 to the power of (-1 [2]. Pour des raisons techniques et économiques, l'injection d'eau dans les réservoirs est la méthode la plus employée dans la récupération du pétrole. Malheureusement, dans bien des cas, l'eau en place dans le gisement est incompatible avec l'eau injectée. Les dépôts et les corrosions causés par les diverses réactions physico-chimiques de cette incompatibilité provoquent des dégradations irréversibles particulièrement dangereuses pour les installations de production de fond comme de surface et quelquefois pour la roche réservoir elle-même. Dans le cadre des travaux de recherche relatifs à l'inhibition des dépôts de sulfate sur le champ algérien de Tin Fouyé Tabankort, cette étude a eu pour objectif de sélectionner et d'adapter aux conditions spécifiques de la production un traitement de prévention des dépôts par injection d'un agent inhibiteur. Elle concerne exclusivement les dépôts de sulfate de baryum pouvant apparaître dans les installations de production par mélange d'eau d'injection très chargée en ion sulfate (1300 mg. 1 puissance(-1 avec une eau de gisement très concentrée en élément baryum (1200 mg. 1 puissance(-1. Une méthode expérimentale au laboratoire, faisant appel à des mesures de type

  7. La cardiomyopathie dilatee au centre hospitalier Universitaire ...

    African Journals Online (AJOL)

    But : Afin d'améliorer la prise en charge, d'éviter l'évolution rapide vers une insuffisance cardiaque réfractaire au traitement, nous avons entrepris cette étude en milieu hospitalier. Méthode : il s'est agi d'une étude rétrospective et descriptive dans le service de cardiologie du Centre Hospitalier Universitaire Tokoin de Lomé.

  8. Evaluation du niveau de connaissance des patients sur la gestion du traitement par les antis vitamines K dans le service de cardiologie de Ouagadougou

    Science.gov (United States)

    Samadoulougou, André; Temoua Naibe, Dangwé; Mandi, Germain; Yameogo, Relwendé Aristide; Kabore, Elisé; Millogo, Georges; Yameogo, Nobila Valentin; Kologo, Jonas Koudougou; Thiam/Tall, Anna; Toguyeni, Boubacar Jean Yves; Zabsonre, Patrice

    2014-01-01

    Introduction Les antivitamines K (AVK), traitement anticoagulant oral le plus largement prescrit, posent un réel problème de santé publique du fait de leur risque iatrogène. L'objectif de cette étude était de préciser le niveau de connaissance des patients sur la gestion de leur traitement par les AVK. Méthodes Il s'est agi d'une enquête transversale descriptive réalisée au CHU-Yalgado Ouédraogo, sur une période de 03 mois : du 1er mars au 31 mai 2012. Un questionnaire a été administré aux patients bénéficiant d'un traitement AVK depuis au moins un mois. Résultats Soixante-dix patients ont été inclus dans l'étude dont 30 hommes. L'âge moyen était de 49 ans ± 16 ans. Les cardiopathies et la maladie thromboembolique veineuse justifiant l'institution du traitement AVK étaient retrouvées respectivement dans 58,6% et 41,4% des cas. Le nom de l'AVK et la raison exacte du traitement étaient connus respectivement dans 91,4% et 67,1% des cas. Plus de la moitié des patients (68,6%) savaient que les AVK rendaient le sang plus fluide. Quarante-six patients (65,7%) citaient l'INR comme examen biologique de surveillance du traitement et seulement 28 patients (40%) connaissaient les valeurs cibles. La majorité des patients ne connaissait pas les risques encourus en cas de surdosage (72,8%) et de sous-dosage (71,4%). Une automédication par anti-inflammatoire non stéroïdien était signalée par 18 patients (25,7%). Les choux (74,3%) et la laitue (62,9%), aliments à consommer avec modération, étaient les plus cités. Conclusion Les connaissances des patients sur la gestion des AVK étaient fragmentaires et insuffisantes pour assurer la sécurité et l'efficacité du traitement. La création d'un programme d'éducation thérapeutique sur les AVK s'avère alors nécessaire. PMID:25870741

  9. LE TRAITEMENT DE LA STENOSE URETERALE D'ORIGINE ...

    African Journals Online (AJOL)

    Conclusion L'endoprothèse JJ associant un traitement antituberculeux est proposée comme une alternative à la chirurgie classique. Un traitement corticoïde s'il est accordé précocement peut aider sans doute à une réduction de la sténose. Treatment of Ureteral Stricture due to Tuberculosis by a ";Double J"; Catheter

  10. Design Characteristics of Soft Control for APR+

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yongsoo; Sung, Chanho; Jung, Yeonsub [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    In the global nuclear industry, the design requirements have been largely divided into the US and the European ones. The APR+ design, based on the proven APR1400 design, was developed to fully comply with the US regulatory and utility requirements. It was also developed to improve the technical competitiveness and enlarge the export market share through design uniqueness and the improvement of safety. The robust design of safety and its validation were requested Post-Fukushima accident. So MMIS design and validation for reinforcing safety were accomplished in APR+ development project. In this paper, the design characteristics of soft control for APR+ are presented to enhance the safety of MMIS design. In this paper, the major design characteristics of soft control for APR+ were introduced to increase the safety of MMIS design. In addition to the design characteristics of soft control described above, the following should be investigated closely for APR+ to get into the global nuclear industry.

  11. Design Characteristics of Soft Control for APR+

    International Nuclear Information System (INIS)

    Kim, Yongsoo; Sung, Chanho; Jung, Yeonsub

    2016-01-01

    In the global nuclear industry, the design requirements have been largely divided into the US and the European ones. The APR+ design, based on the proven APR1400 design, was developed to fully comply with the US regulatory and utility requirements. It was also developed to improve the technical competitiveness and enlarge the export market share through design uniqueness and the improvement of safety. The robust design of safety and its validation were requested Post-Fukushima accident. So MMIS design and validation for reinforcing safety were accomplished in APR+ development project. In this paper, the design characteristics of soft control for APR+ are presented to enhance the safety of MMIS design. In this paper, the major design characteristics of soft control for APR+ were introduced to increase the safety of MMIS design. In addition to the design characteristics of soft control described above, the following should be investigated closely for APR+ to get into the global nuclear industry

  12. Traitement du foisonnement filamenteux dû à Microthrix parvicella par ajout de sels métalliques

    OpenAIRE

    Durban, N.; Juzan, L.; Krier, J.; Héduit, A.; Gillot, S.

    2012-01-01

    National audience; Les dysfonctionnements biologiques dus au développement de bactéries filamenteuses posent de nombreux problèmes d’exploitation aux stations d'épuration du type boues activées. Le filament le plus souvent mis en cause dans ce type de dysfonctionnement en France est Microthrix parvicella. La solution curative la plus utilisée actuellement est la chloration, traitement efficace mais non spécifique, qui impacte également la biologie des boues activées. Une solution émergente co...

  13. Les déterminants du statut “perdu de vue” chez les patients pris en charge pour cancer au Maroc: situation avant le Plan Cancer

    Science.gov (United States)

    Najdi, Adil; Berraho, Mohamed; Bendahhou, Karima; Obtel, Majdouline; Zidouh, Ahmed; Errihani, Hassan; Nejjari, Chakib

    2014-01-01

    Introduction Le cancer au Maroc représente un problème majeur de santé publique, sa prise en charge doit être globale, active et complète pour tous les patients. L'objectif de ce travail était d'estimer la fréquence des perdus de vue « PDV » en oncologie au Maroc durant la première année de suivi et de déterminer les facteurs associés à ce problème. Méthodes Par une étude rétrospective portant sur 2854 dossiers de malades hospitalisés dans les trois principaux centres d'oncologie au Maroc depuis janvier 2003 jusqu’à juin 2007 et concernant les cinq principales localisations de cancer au Maroc, nous avons cherché la date des dernières nouvelles des patients ayant un recul de 18 mois minimum afin de déterminer le statut de ces malades après un an de suivi. Résultats La moyenne d’âge était de 52±14 ans, une proportion féminine de 63%, les sujets actifs constituaient 28%, les mariés 71%, les analphabètes 51%, 70% des patients habitaient en milieu urbain et seulement 11% des malades disposaient d'une couverture sociale. La localisation cancéreuse la plus fréquente était le poumon (23,8%) suivie du colon-rectum (23,5%) puis le col (21,9%), le sein (20,4%) et les lymphomes (10,4%). Le taux des «PDV» à un an de suivi était de 48%, ce statut était significativement lié au sexe, à l’âge, au NSE et au statut matrimonial. Sur le plan médical, le statut «PDV» était lié à la localisation du cancer, au stade de diagnostic et au type de traitement reçu. Conclusion Notre étude a mis en évidence la grande ampleur du problème des PDV en cancérologie au Maroc ainsi que ces déterminants. Ces résultats incitent tous les acteurs dans le domaine de la cancérologie à collaborer ensemble pour prendre les mesures qui s'imposent pour y pallier PMID:25400850

  14. Observation of Au + AuAu + Au + ρ0 and Au + AuAu* + Au* + ρ0 with STAR

    International Nuclear Information System (INIS)

    Spencer, K.

    2002-01-01

    First observation of the reactions Au + AuAu + Au + ρ 0 and Au + AuAu* + Au* + ρ 0 with the STAR detector are reported. The ρ are produced at small perpendicular momentum, as expected if they couple coherently to both nuclei. Models of vector meson production and the correlation with nuclear breakup are discussed, as well as a fundamental test of quantum mechanics that is possible with the system. (author)

  15. Industrial treatment of solutions of fission products. Separation of caesium-137; Traitement industriel de solutions de produits de fission. Separation du cesium-137

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, C; Raggenbass, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    sources solides a partir du melange brut, sans separation; b) separation d'un ou plusieurs produits de fission determines a partir desquels sont confectionnees les sources. L'examen de la composition radioactive du melange de produits de fission resultant de l'exploitation des reacteurs de Marcoule (G1, G2 et G3) montre que le cesium-137 represente a lui seul 30 pour cent de l'energie {gamma} disponible a la sortie de l'usine plutonium, 70 pour cent deux ans apres et pratiquement 100 pour cent au bout de 5 ans. Il n'y a donc qu'un interet minime a entreprendre la confection de sources avec le melange de produits de fission, la separation du cesium ne representant pas un travail plus complique et conduisant a un produit dont les possibilites d'utilisation sont plus nombreuses. Nous avons envisage la separation du cesium-137 par une methode derivee de la methode connue basee sur la precipitation du cesium par l'acide phosphotungstique. Dans les methodes publiees, le phosphotungstate est completement dissous et le cesium est extrait de la solution par echange de cations ou par elimination des ions phosphates et tungstates sur une resine echangeuse d'anions. Nous avons etudie la transformation du phosphotungstate de cesium en phosphate et tungstate de baryum par emploi de l'hydroxyde de baryum qui remet le cesium en solution en hydroxyde. Les avantages sont les suivants: - decontamination plus poussee du cesium-137, sans purification supplementaire; - possibilite de transformation directe en sulfate de cesium; - simplification generale du mode operatoire, et par consequent de l'installation. (auteur)

  16. Industrial treatment of solutions of fission products. Separation of caesium-137; Traitement industriel de solutions de produits de fission. Separation du cesium-137

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, C.; Raggenbass, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1959-07-01

    confection de sources solides a partir du melange brut, sans separation; b) separation d'un ou plusieurs produits de fission determines a partir desquels sont confectionnees les sources. L'examen de la composition radioactive du melange de produits de fission resultant de l'exploitation des reacteurs de Marcoule (G1, G2 et G3) montre que le cesium-137 represente a lui seul 30 pour cent de l'energie {gamma} disponible a la sortie de l'usine plutonium, 70 pour cent deux ans apres et pratiquement 100 pour cent au bout de 5 ans. Il n'y a donc qu'un interet minime a entreprendre la confection de sources avec le melange de produits de fission, la separation du cesium ne representant pas un travail plus complique et conduisant a un produit dont les possibilites d'utilisation sont plus nombreuses. Nous avons envisage la separation du cesium-137 par une methode derivee de la methode connue basee sur la precipitation du cesium par l'acide phosphotungstique. Dans les methodes publiees, le phosphotungstate est completement dissous et le cesium est extrait de la solution par echange de cations ou par elimination des ions phosphates et tungstates sur une resine echangeuse d'anions. Nous avons etudie la transformation du phosphotungstate de cesium en phosphate et tungstate de baryum par emploi de l'hydroxyde de baryum qui remet le cesium en solution en hydroxyde. Les avantages sont les suivants: - decontamination plus poussee du cesium-137, sans purification supplementaire; - possibilite de transformation directe en sulfate de cesium; - simplification generale du mode operatoire, et par consequent de l'installation. (auteur)

  17. Constructibility assessment of APR1400

    International Nuclear Information System (INIS)

    Cho, Sung Jae; Kang, Yong Chul; Lee, Jae Gon; Lim, Woo Sang

    2003-01-01

    APR1400 (formerly KNGR) development is one of national G-7 projects sponsored by government and KHNP (Korea Hydro and Nuclear Power Co., LTD). It is an evolutionary standard reactor with the thermal output of 4000MWt and has been adopted for Shin-Kori Unit 3 and 4. The government organizations, research institutes, universities and industries have participated in the project since 1992 along with KHNP, and the standard design certification program was issued in May 2002. The project set up the top-tier requirements about the safety, economy, operability and maintainability, and constructibility in the early design stage. The requirements have been evaluated periodically during the design process, and the results were reflected to the design. This paper describes the methods for constructibility enhancement and the results of schedule analysis to assure meeting construction duration target, which is set to 48 months from the first concrete pouring to the commercial operation on the condition that learning effects are maximized at Nth plant. To meet the target schedule, the design characteristics and constructibility studies such as new construction methods and construction schedule analysis were performed. The new construction methods presented here are over the top method for NSSS components, deck plate and steel from for concrete wall and slab, automatic welding for large bore piping, and modularization of components and structure, etc. (author)

  18. Mise au point

    African Journals Online (AJOL)

    tomie est replacé et fixé par des fils d'acier, krönlein lais- sait ce fragment pédiculé au fascia temporalis afin d'évi- ter la dépression de la fosse temporale due à la désinser- tion du muscle temporal [20] ; dans notre série, après reconstitution du cadre, le muscle temporal est suturé à son point d'insertion. pour les tumeurs ...

  19. Decontamination of irradiated fuel processing waste using lead paraperiodate; Decontamination des effluents de traitement des combustibles irradies par le paraperiodate de plomb

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J M [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1967-07-01

    The process is designed to eliminate ruthenium. It consists in an oxidation using para-periodic acid whose excess, acting then as a carrying-over agent, is precipitated in the form of a lead salt at a pH of 5 or 6. This process makes it possible to precipitate 80 to 98 per cent of the ruthenium which is not removed by the conventional precipitation techniques which follow it. If the waste is a reducing agent, it is pre-oxidized using ozone or potassium permanganate. The process was developed at Marcoule in 1963 and has since 1965 been applied industrially; its cost price is of the same order of magnitude as conventional processes and its results are satisfactory. (author) [French] Le procede est destine a l'elimination du ruthenium. Il consiste en une oxydation par l'acide par paraperiodique dont l'exces, jouant alors le role d'entraineur, est precipite sous forme de sel de plomb a pH 5 ou 6. Ce traitement permet de precipiter 80 a 98 pour cent du ruthenium rebelle aux traitements de precipitation classique, qui doivent le suivre. Si l'effluent est reducteur il est preoxyde a l'ozone ou au permanganate de potassium. Mis au point a Marcoule en 1963, il est depuis 1965 exploite industriellement, son prix de revient est du meme ordre de grandeur que celui des traitements habituels et les resultats ont donne satisfaction. (auteur)

  20. Étude qualitative sur les perceptions à propos de la capacité des organisations à promouvoir l’activité physique au Canada et à propos de l’influence de ParticipACTION cinq ans après sa relance

    Directory of Open Access Journals (Sweden)

    Subha Ramanathan

    2018-01-01

    Full Text Available Introduction. ParticipACTION est un organisme canadien de communication et de marketing social faisant la promotion de l’activité physique qui a été relancé en 2007. Notre étude visait à évaluer de manière qualitative le pouvoir d’action des organisations canadiennes en matière de promotion de l’activité physique ainsi que l’influence de ParticipACTION sur ce pouvoir cinq ans après sa relance. Méthodologie. Des entrevues téléphoniques semi-structurées ont été réalisées auprès de 44 informateurs clés sélectionnés par échantillonnage dirigé. Les informateurs étaient représentatifs d’organismes nationaux, provinciaux et locaux ayant un mandat en matière de promotion de l’activité physique. Les données tirées des entrevues ont été analysées par thèmes. Résultats. Depuis la relance de ParticipACTION, le pouvoir d’action en matière de partenariats et de collaborations ainsi que le climat général dans le domaine de la promotion de l’activité physique se sont améliorés. Bien que diverses contraintes financières aient réduit la capacité des organisations à remplir leur mandat, leur impact a été atténué par des facteurs internes comme la présence d’employés compétents et les partenariats ainsi que par des facteurs externes comme les progrès technologiques dans les communications et les échanges d’information. Les avis étaient mitigés en ce qui concerne la contribution de ParticipACTION à l’amélioration de ce pouvoir d’action. Bien que ParticipACTION ait attiré l’attention sur l’inactivité, sa contribution a surtout été perçue comme complémentaire aux activités déjà en place. Certains organismes ont considéré que la relance de ParticipACTION avait accru la compétition pour le financement et l’accès aux médias populaires, tandis que d’autres étaient d’avis qu’il s’agissait d’une opportunité d’établir des partenariats officiels pour des

  1. Syndrome hémolytique et urémique de l'enfant au Centre ...

    African Journals Online (AJOL)

    Le traitement était essentiellement symptomatique et comprenait la restriction hydrique, la transfusion de concentrés érythrocytaires, les diurétiques, la dialyse péritonéale et l'hémodialyse. L'évolution était marquée par la survenue d'une insuffisance rénale chronique (1 patient) après 6 mois de suivi et la guérison (1 cas).

  2. Les filières de traitement et de valorisation des boues d'épuration en France. Rapport d'enquête

    OpenAIRE

    Richard, M.; Pradel, M.

    2014-01-01

    / Irstea, en partenariat avec l'Onema, étudie les impacts environnementaux des filières de traitement et de valorisation/élimination des boues d'épuration présentes dans les stations de traitement des eaux usées (STEU) en France. Dans le cadre de la conception et de la structuration d'un outil ACV simplifié, la connaissance des filières boues mises en place en France est nécessaire. Ainsi, une enquête au niveau national a été menée en 2014. L'objectif de cette enquête est dans un premier t...

  3. LA NOTION DE TORTURE, DE TRAITEMENTS INHUMAINS ET DEGRADANTS DANS LA JURISPRUDENCE DE LA COUR EUROPEENNE DES DROITS DE L’HOMME

    Directory of Open Access Journals (Sweden)

    Jean-Paul Céré

    2017-03-01

    Full Text Available En vertu de l'article 3 de la Convention européenne de sauvegarde des droits de l'homme, les Etats ne peuvent ni pratiquer la torture ni infliger des traitements inhumains ou dégradants. Le particularisme de cette convention par rapport aux autres textes internationaux ou régionaux relatifs aux droits de l’homme réside indéniablement dans le système de protection existant qu’elle a organisé. Un organe juridictionnel, la cour européenne des droits de l’homme, est en charge de sanctionner les Etats qui ne respectent la Convention. Au terme d’une jurisprudence novatrice et évolutive, la cour européenne des droits de l’homme impose de plus en plus efficacement de lutter contre la torture, les traitements inhumains et dégradants.

  4. Écrire (d’après

    Directory of Open Access Journals (Sweden)

    Denis Saint-Amand

    2009-03-01

    Full Text Available De l’allusion à la citation, de l’emprunt criard au plagiat déguisé, les jeux d’influences et d’aller-retour avec tel ou tel modèle, grand ou mineur, ont toujours participé de l’élaboration du texte littéraire. Si l’intertextualité est sans aucun doute née en même temps que l’écriture (ou quelques minutes après et que, comme ont pu le montrer notamment Jacques-Philippe Saint-Gérand et Daniel Sangsue, les facettes multiples qu’elle déploie ont toujours suscité l’attention des hommes de lettre...

  5. Résultats positifs de traitements de prévention de venues d'eau en Russie Successful Application Cases of Water Control Treatments in Russia

    Directory of Open Access Journals (Sweden)

    Kolher N.

    2006-11-01

    Full Text Available La production d'eau dans les puits de pétrole ou de gaz est généralement responsable à la fois d'une diminution rapide de la productivité et d'un accroissement des coûts opératoires lié à la nécessité de transporter et de traiter de grandes quantités d'eau. Des problèmes induits tels que production de sable ou de fines, corrosion ou dépôts sont souvent rencontrés. Il en résulte une fermeture prématurée de ces puits du fait d'une production devenue non économique. Pour faire face à ces problèmes et allonger la durée de vie des puits, quelques compagnies ont tenté d'injecter des ciments, des résines ou des gels forts, organiques ou inorganiques, dans les intervalles producteurs d'eau. Ces barrières imperméables, qui nécessitent une isolation de zone au cours de leur mise en place, ont pour but d'empêcher tout écoulement de fluides. Ces traitements présentent cependant des risques importants notamment lorsque les niveaux producteurs d'huile ou d'eau ne peuvent pas être facilement distingués ou lorsque la complétion du puits ne permet pas une isolation de zone au cours du traitement. Pour surmonter ces difficultés, des études ont été conduites à partir de 1984 dans les laboratoires de l'Institut Français du Pétrole (lFP afin de développer des systèmes susceptibles de réduire sélectivement la production d'eau sans affecter de manière significative l'écoulement des hydrocarbures. Ces systèmes sont constitués de polymères de haut poids moléculaire, solubles dans l'eau, utilisés soit seuls, soit sous forme de gels faibles obtenus en présence de certains agents réticulants. Plusieurs procédés ont été développés, chacun d'eux étant adapté à des conditions de réservoir spécifiques, en particulier température de fond et salinité. Tous ces procédés présentent l'avantage de réduire sélectivement la perméabilité à l'eau tout en maintenant, voire en améliorant, la production d

  6. allocution de son excellence l'ambassadeur du canada au burkina ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ali Anwer

    Population et Coordonnateur de l'Unité d'Appui Régional du. PARSEP ... habilitées à concevoir et à produire les instruments nécessaires au suivi de la ... Ces outils permettent le traitement et l'analyse des données relatives à la pauvreté qui ...

  7. The reprocessing of irradiated fuels improvement and extension of the solvent extraction process; Le traitement des combustibles irradies amelioration et extension du procede utilisant les solvants

    Energy Technology Data Exchange (ETDEWEB)

    Faugeras, P; Chesne, A [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-01

    Improvements made in the conventional tri-butylphosphate process are described, in particular. the concentration and the purification of plutonium by one extraction cycle using tri-butyl-phosphate with reflux; and the use of an apparatus working continuously for precipitating plutonium oxalate, for calcining the oxalate, and for fluorinating the oxide. The modifications proposed for the treatment of irradiated uranium - molybdenum alloys are described, in particular, the dissolution of the fuel, and the concentration of the fission product solutions. The solvent extraction treatment is used also for the plutonium fuels utilized for the fast breeder reactor (Rapsodie) An outline of the process is presented and discussed, as well as the first experimental results and the plans for a pilot plant having a capacity of 1 kg/day. The possible use of tn-lauryl-amine in the plutonium purification cycle is now under consideration for the processing plant at La Hague. The flowsheet for this process and its performance are presented. The possibility of vitrification is considered for the final treatment of the concentrated radioactive wastes from the Marcoule (irradiated uranium) and La Hague (irradiated uranium-molybdenum) Centers. Three possible processes are described and discussed, as well as the results obtained from the operation of the corresponding experimental units using tracers. (authors) [French] On decrit les ameliorations apportees au procede classique utilisant le phosphate tributylique, et notamment la concentration et la purification du plutonium par un cycle d'extraction au tributylphosphate avec reflux, l'utilisation d'un appareillage continu de precipitation d'oxalate de plutonium, de calcination de l'oxalate, et de fluoration de l'oxyde. On presente les modifications envisagees pour le traitement des alliages uranium-molybdene irradies, principalement en ce qui concerne la dissolution du combustible et la concentration des solutions de produits de fission

  8. The treatment of effluents; Ameliorations apportees aux traitements des residus radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Wormser, G; Rodier, J; Robien, E de; Fernandez, N [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    -nucleides, nos recherches ont naturellement porte sur I'amelioration des traitements utilises en France: la coprecipitation et l'evaporation. Dans nos etudes, nous avons tout specialement tenu compte des deux conditions imposees dans les centres francais: 1 - Tri tres severe des effluents a la source, afin de limiter dans chaque categorie, le volume des liquides a traiter. 2 - Necessite d'une decontamination tres complete liee a la forte densite de population de notre pays. Dans un dernier chapitre, nous presenterons l'etude de deux methodes originales de traitement d'effluents liquides: 1 - L'emploi de resines echangeuses d'ions pour des liquides relativement charges en sel. Les resines sont utilisees sous forme sodique; le regenerant a cet effet est une solution de sel de sodium qui, apres decontamination par coprecipitation, est reutilisee. Ce procede permet d'obtenir un volume de boue plus reduit. 2 - L'utilisation d'un evaporateur naturel. Ce procede utilise l'air ambiant non sature d'humidite et a temperature ordinaire pour extraire I'eau des effluents aqueux. (auteurs)

  9. Traitement De La Peripneumonie Contagieuse Bovine Par L ...

    African Journals Online (AJOL)

    Traitement De La Peripneumonie Contagieuse Bovine Par L'oxyteTracycline Longe Action Et Transmission Experimentale de la Maladie A Partir de Bovins Traites. ... Tous les 14 animaux ont séroconverti et l'analyse post-mortem a montré la présence des lésions chroniques dont des séquestres pulmonaires chez 4 d'entre ...

  10. Use of ion exchange and early treatment of radioactive contamination in the digestive tract; Utilisation des echangeurs d'ions et traitement precoce de la contamination radioactive par voie digestive

    Energy Technology Data Exchange (ETDEWEB)

    Michon, G; Guilloux, M J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The efficiency of cation exchange resins for the treatment of digestive contamination with strontium has been studied on rats. The results obtained show that the most efficient resins are those of sulfonic type when administered in the ammonium form. The treatment is still efficient when applied 45 minutes after the ingestion of strontium. In the most favourable cases, the radioactivity of the skeleton was lower by a factor 6 in the treated animals than in controls. This easily applicable, rather safe and non specific treatment deserves to be retained for use. (author) [French] Une etude de l'efficacite des resines echangeuses de cations dans le traitement d'une contamination digestive par le strontium a ete entreprise chez le rat. Les resultats montrent que parmi les resines, les plus efficaces sont celles de type sulfonique, administrees sous forme ammonium. Le traitement est encore efficace 45 minutes apres l'ingestion du strontium. Dans les meilleurs cas, le squelette des rats traites etait six fois moins radioactif que celui des temoins. Ce traitement d'emploi facile, peu dangereux, non specifique, merite d'etre retenu. (auteur)

  11. L'utilisation avisée de l'eau au service des villes en pleine croissance

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... durables axées sur l'utilisation des eaux pluviales et le recyclage des eaux usées urbaines. ... L'utilisation avisée de l'eau au service des villes en pleine croissance ... Traitement des eaux usées à Mexico – équilibre entre les bienfaits et les ...

  12. APR1400 Fluidic Device Sensitivity Test

    International Nuclear Information System (INIS)

    Choi, Nam Hyun; Chu, In Cheol; Min, Kyong Ho; Song, Chul Hwa

    2005-12-01

    In the safety injection tank at the emergency core cooling system of APR1400, a new safety design feature, passive fluidic device is equipped which includes no active driving system. It is essential to evaluate the new design feature with various experiments. For this reason, three categories of sensitivity tests have been performed in the present study. As the first sensitivity experiment, the effect of the height of the stand pipe was investigated. The second sensitivity test was conducted with removing the insert plate gasket to examine its effect. The effect of the expansion of the control nozzle width was ascertained from the third sensitivity test. The results of each test showed that the passive fluidic device which will be equipped in the SIT tank of APR1400 has great integrity and repeatability

  13. Processing Th C{sub 2} - UC{sub 2} fuel extracted from high temperature reactors HTGCR; Etude du traitement des combustibles Th C{sub 2} - UC{sub 2} issus de reacteurs a haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Derrien, C; Lessart, P; Pianezza, E; Verry, C; Villain, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The object of this investigation is solubilisation head-end (from crushing and grinding phase to non included first purification phase) of pulverulent ({sup 233}U/{sup 232}Th)C{sub 2} (200 - 500 microns diameter) contained in a graphite matrix extracted from a 4.10{sup 13} n.cm{sup -2}.s{sup -1} thermalized neutrons average flux with an irradiation of 80000 MWjT{sup -1} HTGCR reactor. After having succinctly described different bibliographic processes we have chosen the burn - leach of reactor fuel and graphite matrix containing it. The technology of burner is original in nuclear field and still more by utilizing ultra-sounds to intensify burning reaction and to minimize the weight of unburnables. The mixture of ThO{sub 2}, U{sub 3}O{sub 8}, and fission products oxides is solubilized by boiling HNO{sub 3} 13 M + HF 0.05 M. This process is profit-learning in a thorium recuperation and reprocessing point of view. In the contrary-case it would be interesting to consider a dry-process which would permit to separate solid ThF{sub 4} from gaseous UF{sub 6}. (authors) [French] Cette etude a pour objet le traitement initial de mise en solution ou 'head-end' (allant de la phase broyag-concassage a la phase de premiere purification exclue) d'un combustible ({sup 233}U/{sup 232}Th)C{sub 2} pulverulent (de 200 a 500 {mu} de diametre) contenu dans une matrice de graphite issu d'un reacteur HTGCR surgenerateur a neutrons thermiques de flux moyen 4. l0{sup 13} n.cm{sup -2}.s{sup -1} et taux d'irradiation 80000 MWjT{sup -1}. Apres exposition succincte des differents procedes bibliographiques decrits, nous avons finalement choisi le traitement par combustion-attaque ('Burn-Leach') du combustible et de la matrice etanche graphite qui le contient. La technologie du bruleur est originale dans le domaine nucleaire d'autant qu'elle utilise les ultra-sons pour ameliorer le rendement de la reaction de combustion et reduire au minimum le poids des imbrules. Le melange ThO{sub 2}, U{sub 3}O

  14. Treatment of effluent at the Saclay Centre d'Etudes Nucleaires (1960); Le traitement des effluents du Centre d'Etudes Nucleaires de Saclay (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Wormser, G [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The Centre d'Etudes Nucleaires at Saclay possesses several installations from which liquid radioactive effluent is rejected, and it has thus been found necessary to construct a station for the purification of radioactive liquids and to settle various chemical, analytical and technological problems. This report describes, in the following order: - the disposal possibilities at the Centre d'Etudes Nucleaires, Saclay, - the effluents produced at the centre, - the set-up for collecting effluent, - treatment of the effluent, - results of these treatments. (author) [French] La presence, au Centre d'Etudes Nucleaires de Saclay, de plusieurs installations susceptibles de rejeter des effluents liquides radioactifs a necessite la construction d'une station d'epuration d'eaux radioactives et la mise au point de differents problemes chimiques, analytiques et technologiques. Dans ce rapport, nous exposerons successivement: - les possibilites de rejet du Centre d'Etudes Nucleaires de Saclay, - les effluents du centre, - le dispositif de collecte des effluents, - le traitement de ces effluents, - les resultats de ces traitements. (auteur)

  15. Radiation exposure reduction in APR1400

    International Nuclear Information System (INIS)

    Bae, C. J.; Hwang, H. R.; Matteson, D. M.

    2002-01-01

    The primary contributors to the total occupational radiation exposure in operating nuclear power plants are operation and maintenance activities during refueling outages. The Advanced Power Reactor 1400 (APR1400) includes a number of design improvements and plans to utilize advanced maintenance methods and robotics to minimize the annual collective dose. The major radiation exposure reduction features implemented in APR1400 are a permanent refueling pool seal, quick opening transfer tube blind flange, improved hydrogen peroxide injection at shutdown, improved permanent steam generator work platforms, and more effective temporary shielding. The estimated average annual occupational radiation exposure for APR1400 based on the reference plant experience and an engineering judgment is determined to be in the order of 0.4 man-Sv, which is well within the design goal of 1 man-Sv. The basis of this average annual occupational radiation exposure estimation is an eighteen (18) month fuel cycle with maintenance performed to steam generators and reactor coolant pumps during refueling outage. The outage duration is assumed to be 28 days. The outage work is to be performed on a 24 hour per day basis, seven (7) days a week with overlapping twelve (12) hour work shifts. The occupational radiation exposure for APR1400 is also determined by an alternate method which consists of estimating radiation exposures expected for the major activities during the refueling outage. The major outage activities that cause the majority of the total radiation exposure during refueling outage such as fuel handling, reactor coolant pump maintenance, steam generator inspection and maintenance, reactor vessel head area maintenance, decontamination, and ICI and instrumentation maintenance activities are evaluated at a task level. The calculated value using this method is in close agreement with the value of 0.4 man-Sv, that has been determined based on the experience and engineering judgement

  16. L'eau et les liquides de dialyse dans le traitement de l'insuffisance rénale chronique terminale

    OpenAIRE

    Kunegel , Edouard

    2013-01-01

    Non disponible / Not available; Seules trois méthodes de traitement, aujourd'hui, s'offrent au patient insuffisant rénal chronique (IRC) en phase terminale : la dialyse péritonéale, l'hémodialyse, et la transplantation rénale. L'esquisse de ces techniques sera dessinée au fil de ce travail, avec un focus particulier sur l'hémodialyse, méthode à ce jour encore la plus utilisée. À ses débuts, les résultats proposés par cette procédure, assortis d'une lourde mortalité, étaient peu concluants.Jus...

  17. Optimisation des proprietes fonctionnelles des alliages a memoire de forme suite a l'application de traitements thermomecaniques

    Science.gov (United States)

    Demers, Vincent

    L'objectif de ce projet est de determiner les conditions de laminage et la temperature de traitement thermique maximisant les proprietes fonctionnelles de l'alliage a memoire de forme Ti-Ni. Les specimens sont caracterises par des mesures de calorimetrie, de microscopie optique, de gene ration de contrainte, de deformation recuperable et des essais mecaniques. Pour un cycle unique, l'utilisation d'un taux d'ecrouissage e=1.5 obtenu avec l'application d'une force de tension FT = 0.1sigma y et d'une huile minerale resulte en un echantillon droit, sans microfissure et qui apres un recuit a 400°C, produit un materiau nanostructure manifestant des proprietes fonctionnelles deux fois plus grandes que le meme materiau ayant une structure polygonisee. Pour des cycles repetes, les memes conditions de laminage sont valables mais le niveau de deformation optimal est situe entre e=0.75-2, et depend particulierement du mode de sollicitation, du niveau de stabilisation et du nombre de cycles a la rupture requis par l'application.

  18. Recherche et ingénierie au service des acteurs de l'assainissement - Avant-propos

    Directory of Open Access Journals (Sweden)

    HEDUIT, Alain

    2012-12-01

    Full Text Available L'épuration des eaux usées domestiques est un point clé de la protection des milieux aquatiques. L’Union européenne, à travers la directive relative au traitement des eaux résiduaires urbaines (DERU, 1991 et la directive cadre sur l’eau (DCE, 2000, a imposé aux États membres des obligations en termes de traitement des eaux usées et de qualité des milieux aquatiques. Ces exigences ont nécessité des efforts financiers considérables dans le domaine de l’assainissement. Lire la suite

  19. Le traitement macrostructural de l'emprunt au français dans les ...

    African Journals Online (AJOL)

    «ciment, brique, … surfer (Internet), s'abonner, affecter. (être), nommer (être), etc. Nous allons nous intéresser précisément aux mots locaux qui ont été créés pour remplacer les mots empruntés. Les emprunts sont souvent spontanément et naturellement remplacés à long terme par les termes locaux lorsque les choses et ...

  20. Review of APR+ Level 2 PSA

    International Nuclear Information System (INIS)

    Lehner, J.R.; Mubayi, V.; Pratt, W.T.

    2012-01-01

    Brookhaven National Laboratory (BNL) assisted the Korea Institute of Nuclear Safety (KINS) in reviewing the Level 2 Probabilistic Safety Assessment (PSA) of the APR+ Advanced Pressurized Water Reactor (PWR) prepared by the Korea Hydro and Nuclear Power Co., Ltd (KHNP) and KEPCO Engineering and Construction Co., Inc. (KEPCO-E and C). The work described in this report involves a review of the APR+ Level 2 PSA submittal (Ref. 1). The PSA and, therefore, the review is limited to consideration of accidents initiated by internal events. As part of the review process, the review team also developed three sets of Requests for Additional Information (RAIs). These RAIs were provided to KHNP and KEPCO-E and C for their evaluation and response. This final detailed report documents the review findings for each technical element of the PSA and includes consideration of all of the RAIs made by the reviewers as well as the associated responses. This final report was preceded by an interim report (Ref. 2) that focused on identifying important issues regarding the PSA. In addition, a final meeting on the project was held at BNL on November 21-22, 2011, where BNL and KINS reviewers discussed their preliminary review findings with KHNP and KEPCO-E and C staffs. Additional information obtained during this final meeting was also used to inform the review findings of this final report. The review focused not only on the robustness of the APR+ design to withstand severe accidents, but also on the capability and acceptability of the Level 2 PSA in terms of level of detail and completeness. The Korean nuclear regulatory authorities will decide whether the PSA is acceptable and the BNL review team is providing its comments for KINS consideration. Section 2.0 provides the basis for the BNL review. Section 3.0 presents the review of each technical element of the PSA. Conclusions and a summary are presented in Section 4.0. Section 5.0 contains the references.

  1. Inhibition of Pseudomonas aeruginosa virulence: characterization of the AprA-AprI interface and species selectivity.

    Science.gov (United States)

    Bardoel, Bart W; van Kessel, Kok P M; van Strijp, Jos A G; Milder, Fin J

    2012-01-20

    Pseudomonas aeruginosa secretes the virulence factor alkaline protease (AprA) to enhance its survival. AprA cleaves one of the key microbial recognition molecules, monomeric flagellin, and thereby diminishes Toll-like receptor 5 activation. In addition, AprA degrades host proteins such as complement proteins and cytokines. P. aeruginosa encodes a highly potent inhibitor of alkaline protease (AprI) that is solely located in the periplasm where it is presumed to protect periplasmic proteins against secreted AprA. We set out to study the enzyme-inhibitor interactions in more detail in order to provide a basis for future drug development. Structural and mutational studies reveal that the conserved N-terminal residues of AprI occupy the protease active site and are essential for inhibitory activity. We constructed peptides mimicking the N-terminus of AprI; however, these were incapable of inhibiting AprA-mediated flagellin cleavage. Furthermore, we expressed and purified AprI of P. aeruginosa and the homologous (37% sequence identity) AprI of Pseudomonas syringae, which remarkably show species specificity for their cognate protease. Exchange of the first five N-terminal residues between AprI of P. syringae and P. aeruginosa did not affect the observed specificity, whereas exchange of only six residues located at the AprI surface that contacts the protease did abolish specificity. These findings are elementary steps toward the design of molecules derived from the natural inhibitor of the virulence factor AprA and their use in therapeutic applications in Pseudomonas and other Gram-negative infections. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Au Cern, premières collisions de protons hier

    CERN Multimedia

    Galeazzi, Juliette

    2009-01-01

    "Hier, les scientifiques du monde entier ont salué le redémarrage du LHC, grand collisionneur de hadrons, au Cern à Genève. Après quatorze mois d'arrêt, à la suite d'une panne, les expériences ont pris et les premières collisions ont eu lieu" (2 pages)

  3. Processing ore from Forez; Etude pour le traitement du minerai du Forez

    Energy Technology Data Exchange (ETDEWEB)

    Kremer, M

    1957-12-01

    A new process is given for the chemical separation, simply and economically, of the uranium contained in solutions formed by sulfuric acid attack of low uranium content ores. The attacking solution is processed in two stages. The solution is neutralized to pH 2,7 to 3 with milk of lime and a portion of the dissolved impurities are precipitated. Then milk of lime of the uranium is precipitated to pH 6,5 to 7. The uranium concentrate is then subjected to controlled sulfuric attack for its total reduction to a solution containing a minimum of foreign ions. The uranium solution thus obtained is purified by extraction with TBP. (author) [French] Ce nouveau procede permet de separer par voie chimique et de facon simple et economique des solutions obtenues par l'attaque a l'acide sulfurique des minerais d'uranium a faible teneur. Le traitement de la solution d'attaque se fait en deux temps: 1) neutralisation de la solution a pH 2,7-3, par un lait de chaux et elimination par precipitation d'une partie des impuretes dissoutes a l'attaque. 2) precipitation par un lait de chaux, de l'uranium a pH 6,5-7. Le concentre d'uranium est ensuite soumis a une attaque sulfurique qui fait repasser tout l'uranium en solution avec le minimum d'ions etrangers. La solution d'uranium ainsi obtenue est purifiee par extraction au TBP. (auteur)

  4. La fibrillation atriale, fréquence, facteurs étiologiques, évolution et traitement dans un service de cardiologie de Dakar, Sénégal

    Directory of Open Access Journals (Sweden)

    Kane Abdoul

    2010-09-01

    Full Text Available INTRODUCTION: La fibrillation atriale est le trouble du rythme cardiaque soutenu le plus fréquent. Les objectifs de ce travail étaient d’étudier la fréquence, les facteurs étiologiques, l’évolution et le traitement de la fibrillation atriale dans un service de cardiologie de Dakar au Sénégal. METHODES: Il s’agit d’une étude rétrospective réalisée sur cinq ans et portant sur l’analyse de 150 dossiers de patients hospitalisés pour une fibrillation atriale. RESULTATS: La fréquence de la fibrillation atriale était de 5,35 % et représentait 66% des troubles du rythme cardiaque avec une prédominance féminine (sex-ratio H/F = 0,45 et un âge moyen de 57,06 ± 18,64 ans. L’origine de la fibrillation était valvulaire dans 36,7% des cas. Les complications thromboemboliques étaient plus fréquentes dans la fibrillation atriale non valvulaire (p=0,006, chez les sujets d’âge > 50 ans (p=0,01 et en cas de dilatation de l’oreillette gauche (p=0,05. Une anticoagulation par anti-vitamine K était instaurée dans 62% des cas et un traitement de contrôle de la fréquence cardiaque dans 87,33%. CONCLUSION: La fibrillation atriale est fréquente en milieu hospitalier africain et concerne des sujets relativement jeunes. L’hypertension artérielle et les valvulopathies rhumatismales sont les principaux facteurs étiologiques. Le traitement reste essentiellement médicamenteux par contrôle de la fréquence cardiaque.

  5. Processing of wastewaters of column bases of the C.E.B. uranium-thorianite plant; Traitement des eaux residuaires des pieds de colonne de l'usine d'urano-thorianite du C.E.B.

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, P.; Wormser, G.

    1959-08-12

    The authors report, on the one hand, results of tests aimed at determining an optimal chemical treatment for the purification of wastewaters from the column of extraction by solvents of the CEB uranium-thorianite plant, and on the other hand, the measurement problems faced due to the chemical composition of the studied solutions. In a first set of tests, the authors studied the carryover efficiency of barium sulphate and barium carbonate, but due to difficulties created by the presence of barium when recovering radium, other possibilities have been studied which take this possibility of barium recovery without barium into account. The obtained results show the benefit of an intermediate filtration of lead sulphate, followed by an additional purification. The decontamination rate is then multiplied by ten, and radium is recovered in a precipitate free of hydroxides. An operational mode is proposed. In the first part, the authors describe measurement methods used to determine total alpha and radium in highly salted solutions [French] Dans ce rapport sont exposes: - d'une part les resultats des essais de laboratoire en vue de determiner un traitement chimique optimum pour l'epuration des eaux residuaires en provenance de la colonne d'extraction par solvants de l'usine d'urano-thorianite du C.E.B.; - d'autre part les problemes de mesure qui se sont poses du fait de la composition chimique des solutions etudiees. Dans une premiere serie d'essais nous avons etudie l'efficacite de l'entrainement par le sulfate de baryum et le carbonate de baryum. Toutefois, avertis des difficultes posees par la presence de baryum lors d'une eventuelle recuperation du radium, nous avons ete amenes a etudier les deux cas suivants qui tiennent compte de la necessite de recuperer le radium sans baryum: - soit faire une seule filtration d'un precipite de sulfate de plomb + hydroxydes, - soit proceder a une filtration intermediaire du sulfate de plomb. Apres divers essais, il est apparu que la

  6. MELCOR code modeling for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Young; Park, S. Y.; Kim, D. H.; Ahn, K. I.; Song, Y. M.; Kim, S. D.; Park, J. H

    2001-11-01

    The severe accident phenomena of nuclear power plant have large uncertainties. For the retention of the containment integrity and improvement of nuclear reactor safety against severe accident, it is essential to understand severe accident phenomena and be able to access the accident progression accurately using computer code. Furthermore, it is important to attain a capability for developing technique and assessment tools for an advanced nuclear reactor design as well as for the severe accident prevention and mitigation. The objective of this report is to establish technical bases for an application of the MELCOR code to the Korean Next Generation Reactor (APR1400) by modeling the plant and analyzing plant steady state. This report shows the data and the input preparation for MELCOR code as well as state-state assessment results using MELCOR code.

  7. Special equipment for processing can-rupture measurements; Equipement specialise de traitement des mesures de rupture de gaines

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, J.; Phalippou, J.; Dumont, D.; Viellard, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    installees sur des reacteurs nucleaires utilisent dans la partie du traitement des mesures en totalite ou en partie un calculateur numerique. La fiabilite du systeme est limitee par celle du calculateur, celui-ci representant un point commun pour tout le traitement DRG. Pour satisfaire aux exigences de la securite de fonctionnement il faudrait envisager dans certains cas de doubler le calculateur. L'utilisation d'un calculateur necessite comme interface entre l'equipement de detection et lui-meme des echelles fonctionnant en integrateur pour les impulsions sortant du detecteur. En ajoutant un certain nombre de circuits a ces echelles on est capable d'effectuer le travail demande actuellement au calculateur, en ce qui concerne le calcul. Ce raisonnement nous a conduit a une solution dite ''decentralisee'' en realisant des equipements specialises au niveau du prospecteur meme. Nous croyons que cette solution represente, en dehors de l'aspect de fiabilite, surtout un interet economique. Dans notre solution, le point commun dans le traitement d'information se situe maintenant non plus au niveau d'elaboration du resultat comme dans le cas du calculateur, mais a un niveau plus bas, dans l'impression des resultats. Meme dans le cas d'une defaillance du point commun, les resultats sont elabores, affiches et compares aux seuils d'alarme. Dans le cas d'une panne d'un equipement specialise les resultats de ce prospecteur ne sont plus disponibles, les autres restent en fonction. Il semble que cette solution represente un degre de fiabilite meilleur que la solution utilisant les calculateurs universels. L'utilisation d'une technique a tiroir interchangeable (MULTIBLOC) permet un remplacement rapide de l'equipement specialise en panne. L'emploi systematique des circuits integres (TTL) assure une fiabilite accrue de l'equipement. (auteur)

  8. Ville et santé publique au Japon

    Directory of Open Access Journals (Sweden)

    Takano Takehito

    1996-04-01

    Full Text Available Mon intervention porte sur le niveau de santé en secteur urbain et les questions à l'ordre du jour dans le domaine de la santé publique au Japon. La première partie concerne la cartographie des indices de santé en secteur urbain. Une telle cartographie requiert l'utilisation de techniques de traitement de l'image. On peut l'effectuer soit à l'aide du “ système d'information géographique ” (Geographic Information System, GIS, soit par une “image-diagnostic” (Image Diagnosis des différentes ...

  9. Development of Reactor Coolant Pump for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Bang, Sang-Youn; Chu, Sung-Min; Chang, Jin-Young [Doosan Heavy Industries and Construction, Changwon (Korea, Republic of)

    2015-10-15

    The development was focused on the performance requirements for APR1400 and to achieve the goals of the safety, reliability and adaptability for APR1400 system design. In addition, APR1400 RCP design was customized considering convenience of installation, operation and maintainability. This paper describes the details of the development process, improved design feature and type test results. Based on development of core technology of RCP, DOOSAN supplies the localized and improved APR1400 RCP to Shin-Hanul 1 and 2 Project. This would be good experience that the RCP core technology can break foreign monopoly in supplying the domestic nuclear industry. Also, there expect APR1400 RCP can be sustainable revenue models in nuclear industry. Moreover, development of RCP will be a catalyst to enhance design capacity for equipment and system of nuclear power plant as well as evaluation and verification skills of Korean nuclear industry.

  10. The APR1400 Core Design by Using APA Code System

    International Nuclear Information System (INIS)

    Choi, Yu Sun; Koh, Byung Marn

    2008-01-01

    The nuclear design for APR1400 has been performed to prepare the core model for Automatic Load Follow Operation Simulation. APA (ALPHA/ PHOENIXP/ ANC) code system is a tool for the multi-cycle depletion calculations for APR1400. Its detail versions for ALPHA, PHOENIX-P and ANC are 8.9.3, 8.6.1 and 8.10.5, respectively. The first and equilibrium core depletion calculations for APR1400 have been performed to assure the target cycle length and confirm the safety parameters. The parameters are satisfied within limitation about nuclear design criteria. This APR1400 core models will be based on the design parameters for APR1400 Simulator

  11. Complications du traitement traditionnel des fractures : à propos de ...

    African Journals Online (AJOL)

    Introduction : La médecine moderne, comme celle traditionnelle, concourt au rétablissement du bien être physique, mental et social. Au Sénégal comme ailleurs ces deux médecines se pratiquent à tous les niveaux. Faut-il établir un rapport de nécessité entre les deux ou mettre une nette séparation ; chacune évoluant pour ...

  12. Face au risque

    CERN Document Server

    Grosse, Christian; November, Valérie

    2007-01-01

    Ce volume collectif sur le risque inaugure la collection L'ÉQUINOXE. Ancré dans l'histoire pour mesurer les continuités et les ruptures, il illustre la manière dont les sciences humaines évaluent et mesurent les enjeux collectifs du risque sur les plans politiques, scientifiques, énergétiques, juridiques et éthiques. Puisse-t-il nourrir la réflexion sur la culture et la prévention du risque. Ses formes épidémiques, écologiques, sociales, terroristes et militaires nourrissent les peurs actuelles, structurent les projets sécuritaires et constituent - sans doute - les défis majeurs à notre modernité. Dans la foulée de la richesse scientifique d'Equinoxe, L'ÉQUINOXE hérite de son esprit en prenant à son tour le pari de contribuer - non sans risque - à enrichir en Suisse romande et ailleurs le champ éditorial des sciences humaines dont notre société a besoin pour forger ses repères. Après Face au risque suivra cet automne Du sens des Lumières. (MICHEL PORRET Professeur Ordinaire à la F...

  13. The processing and management of wastes from atomic reactors; Nouvelles installations industrielles du C.E.A. pour le traitement des dechets radioactifs liquides et solides

    Energy Technology Data Exchange (ETDEWEB)

    Cerre, P; Mestre, E; Bourdrez, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    particulier: - Pour les liquides, les traitements par voie physique, chimique et physicochimique. - Pour les solides, les techniques de decontamination, de reduction de volume et de conditionnement de longue duree. Nous developpons egalement dans ce rapport les differents modes de collecte et de stockage avant et apres traitement des dechets solides. La communication se termine par un rapide expose des etudes en cours, tant techniques qu'economiques sur ce sujet. (auteurs)

  14. Etude pilote par PET/CT de la réponse à l'ipilimumab dans le traitement du mélanome métastatique.

    OpenAIRE

    Rochat, N.

    2012-01-01

    0 Abstract L'incidence du mélanome est en nette augmentation en Europe et aux Etats-Unis. La Chirurgie peut être curative au stade précoce de la maladie,la radiothérapie se pratique À visée palliative, les chimiothérapies n'ont montré que peu d'effet. Les progress actuels se font via l'immunothérapie. Des traitements par l'interleukine-2 et l'interféron-α se sont montrés efficaces chez certains patients, mais leur utilisation est limitée par leur forte toxicité. Depuis 201...

  15. Évaluation des émissions de gaz à effet de serre des filières de traitement et de valorisation des boues issues du traitement des eaux usées

    OpenAIRE

    Reverdy, A.L.; Pradel, M.

    2011-01-01

    / Ce rapport présente l'inventaire des différentes consommations énergétiques, en consommables et des GES pour chaque poste de traitement et de valorisation des boues issues du traitement des eaux usées.

  16. Microbiological Studies on the Influence of Combined Processes of Heat and Irradiation on the Survival of Saccharomyces Cerevisiae Var. Ellipsoideus; Etudes Microbiologiques sur l'Influence d'un Traitement Mixte par Chauffage et Irradiation sur la Survie de Saccharomyces Cerevisiae Var. Ellipsoideus; Mikrobiologicheskie issledovaniya vliyaniya sovmestnykh protsessov nagreva i oblucheniya na vyzhivanie saccharomyces Cerevisiae Var. Ellipsoideus; Estudios Microbiologicos de la Influencia del Calentamiento e Irradiacion Combinados Sobre la Supervivencia del Saccharomyces Cerevisiae Var. Ellipsoideus

    Energy Technology Data Exchange (ETDEWEB)

    Stehlik, G.; Kaindl, K. [Institute for Biology and Agriculture, Reaktorzentrum, Seibersdorf (Austria)

    1966-11-15

    this treatment are under investigation on apple and grape juice. (author) [French] L'un des principaux sujets de recherche inscrits au programme international sur la conservation des fruits et jus de fruits par irradiation, execute a Seibersdorf, est le probleme de la radiosensibilisation des micro-organismes. En vue d'etudier l'effet d'un traitement par la chaleur et l'irradiation sur la survie des cellules de levures (formation de colonies), une souche a forte radioresistance - Saccharomyces cerevisiae var. ellipsoideus - cultivee sur un milieu nutritif semi-synthetique, a ete soumise des le debut de sa phase logarithmique a un traitement combine par chauffage et irradiation gamma (source au cobalt-60). Le traitement thermique a ete applique, soit immediatement avant l'irradiation, soit pendant ou immediatement apres celle-ci. On a fait varier la temperature entre 20 et 52,5 Degree-Sign C. Pour l'irradiation, effectuee dans Bullet un tube en verre bien aere, on a utilise des doses allant jusqu'a 0, 3 x 10{sup 6} rad. L'effet d'inhibition de ce traitement mixte depend de l'ordre de succession du chauffage et de l'irradiation; les resultats obtenus sont les suivants: la combinaison la plus efficace est un traitement simultane par chauffage et irradiation; la combinaison qui consiste a faire suivre le chauffage d'une irradiation a la temperature ambiante est moins efficace; le moindre effet a ete obtenu par chauffage apres irradiation a la temperature ambiante. Le traitement mixte chaleur/irradiation donne des courbes de survie (fractions d'organismes survivants) qui sont des lignes droites ayant pour coordonnees la dose d'irradiation a une echelle semi-logarithimique, et la temperature dans l'intervalle compris entre la temperature ambiante et 45 Degree-Sign C. Au-dessus de 45 Degree-Sign C, les courbes indiquent, a des doses inferieures a 30 krad, un accroissement du nombre des survivants par rapport a l'echantillon non irradie. En comparant les pentes des courbes de

  17. EU-APR Design in compliance with EUR Grid Requirement

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong-Hwan; Lee, Keun-Sung [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    European Utility Requirements (EUR) provides technical requirements for the generation III nuclear power plant in the European countries. EUR grid requirements present the plant requirements to satisfy the needs of the grid network. The grid requirements are the precondition for the operation of a generating plant on the network. This paper describes EU-APR design which has taken account of EUR grid requirements. In this paper, EU-APR designs according to the EUR grid requirements were described. EU-APR was designed in compliance with the voltage and frequency operation field and also designed to have the capability of load following such as primary control, secondary control, and daily load following. Consequently, the EU-APR design according to the EUR grid requirements is expected to get competitiveness and enhance the license feasibility in the European nuclear market.

  18. Thermodynamic Aspects of Supercritical Fluids Processing: Applications of Polymers and Wastes Treatment Aspects thermodynamiques des procédés mettant en oeuvre des fluides supercritiques : applications aux traitements des polymères et des déchets

    Directory of Open Access Journals (Sweden)

    Beslin P.

    2006-11-01

    , fibres et substrats (produits pharmaceutiques, explosifs, revêtements, pour le séchage des matériaux (gels. Cet article présente les propriétés physicochimiques exceptionnelles des fluides supercritiques en rapport avec leurs applications en ingénierie. Après un bref rappel des concepts fondamentaux relatifs au comportement critique des fluides purs, nous développons d'une manière plus détaillée les propriétés physicochimiques ajustables des fluides dans le domaine supercritique. La deuxième partie de l'article décrit les applications en ingénierie des fluides supercritiques relatives aux réactions chimiques et au traitement des polymères. Chaque présentation d'application est divisée en deux parties : la première rappelle les concepts de base et le contexte général ainsi que les propriétés physicochimiques, la seconde développe les applications en ingénierie se rapportant au domaine concerné.

  19. Effets de traitements herbicides sur Rhamphicarpa fistulosa (Hochst ...

    African Journals Online (AJOL)

    SARAH

    -169. Paré, J., 1993. Aspects de la dynamique de la formation de graine chez Striga. (Scrophulariaceae) parasite des céréales tropicales. Contribution à la mise au point d'une lutte chimique. Thèse de doctorat ès Sc. Nat.

  20. A Probability Analysis of the Generating Cost for APR1000+

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Gag-Hyeon; Kim, Dae-Hun [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, cutting CO{sub 2} emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the APR1000+ development is to ensure export competitiveness in the developing countries in the Middle East and Southeast Asia. To that end, APR1000+(1,000MWe, 3.5 generation) will be developed based on APR+ (1,500MWe, 3.5 generation). And comparing to OPR1000(Korean Standard Nuclear power Plant, 2.5 generation), APR1000+ have many design features such as the 60 year design life time, comprehensive site requirement of 0.3g seismic design, stability improvement, operability improvement and provisions for severe accidents. In this simulation, the results of generating cost for APR1000+ preliminary conceptual design using a probability method was shown to be 48.37 ~ 74.22 won/kWh(median value 56.51 won/kWh). Those of OPR1000 was 42.08 ~ 61.77 won/kWh(median value 48.63 won/kWh). APR1000+ has -16.2% cost advantage over OPR1000 nuclear power plant. The main reason of this results is due to adding several safety designs.

  1. ITAAC Development for APR1400 NRC Design Certification

    International Nuclear Information System (INIS)

    Kim, Jin Kwon; Kim, Myoung Ki

    2013-01-01

    ITAAC (Inspections, Tests, Analyses and Acceptance Criteria) is essential document for Design Certification, which is certified by NRC and ruled as the Appendix of the 10 CFR Part 52. Approximately 870 ITAAC items were selected for APR1400 Design Certification to be submitted to NRC. In this paper, the code and standard related to ITAAC and process of ITACC development are discussed to seek the way to complete the best ITAAC to get the Design Certification of APR1400 from NRC through the lessons learned from other competitive applicants. For saving the time and manpower to complete ITAAC of APR1400 NRC DC and reduction of the RAIs (Request Additional Information) from NRC, we took advantage of the lessons learned from the competitive designs like US-APWR and AP1000 based on KNGR ITAAC. Finally new and different ITAAC from ITAAC of KNGR was developed for APR1400 DC from NRC. RG 1.206 and SRPs were applied first in Korea to the APR1400 DCD preparation. For testability and acceptability check, ITAAC V and V table was completed by the system designers. APR1400 DCD will be submitted by the end of September this year and we hope that NRC issues lees RAIs on ITAAC document

  2. Optimization Strategy of the APR+ BOP Technical Specifications

    International Nuclear Information System (INIS)

    Cho, Yoon Sang; Lee, Jae Gon; Han, Sung Heum

    2016-01-01

    The BOP is one of the key factors for successful project implementation of NPP. In constructing the APR1400 NPP, the BOP procurement has been one of the biggest concerns. Due to the design changes and increased capacity of equipment in NPP, lots of BOPs should be ‘first supplied equipment’ [hereinafter, ‘FSE’]. The manufacture-ability, and the performances of FSEs have not been fully proved and tested, manufacturers and suppliers are requested to submit Reports for Equipment Qualification Evaluation in accordance with 10 CFR 50.49, IEEE 323. They need at least 1-2 years’ tests for Environment Qualification (EQ) and Seismic Qualification (SQ). This study is focused how to prepare the BOP purchase specifications in order to control the FSEs, especially in safety class equipment. With the optimization plan for BOP packages of this study, the FSEs’ occurrence can be reasonably controlled as low as possible. For successful NPP project, the concerns in procuring BOPs shall be fully analyzed beforehand. Now Korea is preparing new era of APR+, with closing the time of APR1400. The technical specification of APR+ BOPs can be developed and prepared successfully and very effectively according to this optimization plan. This will be a great contribution not only in constructing APR+ in time, but also in exporting APR+ overseas, all over the world in the future

  3. Optimization Strategy of the APR+ BOP Technical Specifications

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Yoon Sang; Lee, Jae Gon; Han, Sung Heum [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    The BOP is one of the key factors for successful project implementation of NPP. In constructing the APR1400 NPP, the BOP procurement has been one of the biggest concerns. Due to the design changes and increased capacity of equipment in NPP, lots of BOPs should be ‘first supplied equipment’ [hereinafter, ‘FSE’]. The manufacture-ability, and the performances of FSEs have not been fully proved and tested, manufacturers and suppliers are requested to submit Reports for Equipment Qualification Evaluation in accordance with 10 CFR 50.49, IEEE 323. They need at least 1-2 years’ tests for Environment Qualification (EQ) and Seismic Qualification (SQ). This study is focused how to prepare the BOP purchase specifications in order to control the FSEs, especially in safety class equipment. With the optimization plan for BOP packages of this study, the FSEs’ occurrence can be reasonably controlled as low as possible. For successful NPP project, the concerns in procuring BOPs shall be fully analyzed beforehand. Now Korea is preparing new era of APR+, with closing the time of APR1400. The technical specification of APR+ BOPs can be developed and prepared successfully and very effectively according to this optimization plan. This will be a great contribution not only in constructing APR+ in time, but also in exporting APR+ overseas, all over the world in the future.

  4. Long term developments in irradiated natural uranium processing costs. Optimal size and siting of plants; Perspectives a long terme des couts de traitement de l'uranium naturel irradie. Tailles et localisations optimales des usines

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Oger, C; Vaumas, P de [Saint-Gobain Nucleaire, 92 - Courbevoie (France)

    1964-07-01

    processing plants are shown, different from those in part two. The indirect effect of these reprocessing programmes on the availability of plutonium, and therefore on the possibility.of undertaking plutonium burning reactor programmes, must be taken into account. (authors) [French] L'objet de cette communication est d'apporter une contribution a la solution du probleme du choix des tailles et des localisations optimales des usines de traitement des combustibles nucleaires irradies, associees a des programmes de puissance electrique installee. Dans une premiere partie, on etudie la structure des couts d'investissements et d'exploitation des usines de traitement de l'uranium naturel irradie, l'influence de la taille des usines sur ces couts et ces structures de couts. Au cout de traitement de l'uranium naturel irradie s'ajoute d'autre part le cout du transport des combustibles irradies des lieux de production aux sites des usines de traitement. La recherche du cout minimum pour la production d'un pays ou d'un ensemble de pays fait donc intervenir a la fois la taille et la localisation des usines. On indique les couts de transport previsibles pour l'uranium naturel irradie et la structure de ces couts (transport, assurance, couts et amortissement des containers). Dans une deuxieme partie, et pour differents echeanciers de combustibles irradies a traiter chaque annee, on determine les tailles et les localisations optimales des usines de traitement et la sensibilite de ces resultats, aux hypotheses de base concernant le cout du traitement, le cout du transport, l'annee de demarrage du programme d'usines, l'horizon choisi. - le probleme de nature combinatoire, assez complexe, est resolu par l'application des methodes de la programmation dynamique. - on montre que les methodes sont egalement applicables au probleme du choix des tailles et des localisations optimales des usines de traitement des elements du type MTR, associees aux programmes de reacteurs de recherche ainsi qu

  5. What about sexual life after therapy for prostate cancer?; Y a t-il une vie sexuelle apres traitement d'un cancer prostatique?

    Energy Technology Data Exchange (ETDEWEB)

    Cosset, J.M. [Institut Curie, 75 - Paris (France)

    2002-05-01

    The precise assessment of sexual dysfunction after treatment of prostatic cancer cannot be avoided in 2002. These iatrogenic complications may significantly alter the quality of life of the patients. In addition, sexual toxicity is progressively becoming a cardinal parameter for the treatment choice, both for the patient and the physician. Significant efforts allowed to reduce sexual toxicity after therapy in the recent years. As an example, nerve-sparing surgical techniques have been proposed, whenever reasonable. However, in spite of these surgical advances, data suggest that overall, the new irradiation techniques (conformal radiotherapy and brachytherapy) are responsible for less alteration of sexual life than surgery. Another potential advantage is that sildenafil (Viagra) is able to restore potency in a majority of cases after radiotherapy, while it is usually poorly effective after surgery. (author)

  6. Les filtres et lits plantés de roseaux en traitement d'eaux usées domestiques. Perspectives pour le traitement d'eaux pluviales

    OpenAIRE

    Boutin, C.; Esser, D.; Molle, P.; Liénard, A.

    2000-01-01

    L'article decrit puis compare le fonctionement des filtres plantes de roseaux a flux vertical puis horizontal a partir d'experiences francaises ou internationales sur le traitement des eaux usees domestiques. La discussion finale signale, par l'intermediaire d'experiences, la possibilite de traiter des eaux pluviales par ces techniques; pour autant, les bases de dimensionnement ne sont pas établies. / This article presents and describes vertical and horizontal reed beds filters for domestic w...

  7. Qualite de vie apres un accident vasculaire cerebral au Senegal: a ...

    African Journals Online (AJOL)

    The accident was ischemic in 70% of cases, hemorrhagic in 30% of cases. 66% had a Barthel index between (60-100), 6% were between (0-20). The score was significantly better in young series (15-34), which all have a Barthel index between (60-100), more over 50% of patients in the portion above 75 years were in the ...

  8. Un solveur HLLT pour les equations de Saint-Venant et traitement ...

    African Journals Online (AJOL)

    Un solveur HLLT pour les equations de Saint-Venant et traitement des ... Enfin, des applications numériques sur des cas tests sont présentées. ... the system of partial-differential equations is completed by a trivial equation for the bathymetry.

  9. Un solveur HLLTpour les equations de Saint-vVenant et traitement ...

    African Journals Online (AJOL)

    Un solveur HLLTpour les equations de Saint-vVenant et traitement des ... Enfin, des applications numériques sur des cas tests sont présentées. ... the system of partial-differential equations is completed by a trivial equation for the bathymetry.

  10. Résultats du traitement chirurgical des traumatismes du rachis à l ...

    African Journals Online (AJOL)

    incomplète était prédictive de bon pronostic P< 0,001. Les traumatismes du rachis cervical sont des urgences neurologiques qui mettent en jeu le pronostic vital et fonctionnel des patients. Mots clés : Traumatisme, rachis, traitement. The purpose of this series was to describe the results of surgical treatment of spinal injury.

  11. Central Au on Au collisions

    Energy Technology Data Exchange (ETDEWEB)

    Alard, J.P.; Amouroux, V. [Labo de Phys. Corp., IN2P3-CRNS, Univ. Blaise Pascal, Clermont-Fd. (France); Basrak, Z. [Rudjer Boskovic Institute, Zagreb (Croatia)] [and others; FOPI-Collaboration

    1995-02-06

    In nucleus-nucleus collisions the initial relative kinetic energy of target and projectile is available for internal excitation of the interacting system; it is however still not well established to what extent local equilibrium and thermalisation occur. Local equilibrium is of interest to derive, within the formalism of transport equations and of the equation of state, (EOS), general properties of compressed and excited nuclear matter. Such approach describes in relatively simple terms the complex many body interactions occuring within extended baryonic and hadronic (or quark) matter. For a basic microscopic understanding it is highly desirable to investigate the elementary in-medium interactions in relation to the free elementary processes. Excitation function measurements of central collisions between the heaviest available nuclei (like Au on Au), supply the best ground for such studies: the highest degree of thermalisation and compression is expected for such reactions. The consideration presented here of energy thermalisation and of an expanding system clusterizing at freeze-out in a situation close to the liquid gas phase transition can be of interest to astrophysics as well as to the quark gluon plasma deconfinement studied in nucleus-nucleus collisions at the higher energy regime of CERN and Brookhaven. (orig.).

  12. Development of Reference Source Terms for EU-APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, ByungIl; Lee, Chonghui; Lee, Dongsu; Ko, Heejin; Kang, Sangho [KEPCO Engineering and Construction Co. Inc., Yongin (Korea, Republic of)

    2014-05-15

    These source terms are developed for the typical U. S. NPP and do not reflect the design characteristics of EU-APR1400 (1,400 MWe PWR) which will be applied for the EUR certification in European countries. The process of developing the RST for EU-APR1400 is to undergo a similar process that NUREG-1465 had gone through when it came out with its proposed source terms. The purpose of this study is to develop the EU-APR1400 design-specific RST complied with the EUR. The Large LOCA is the reference equence used in the NUREG-1465 evaluation, whereas the EUAPR1400 risk-significant sequences are dominated by small LOCA and non-LOCA sequences. Moreover, when considering the EU-APR1400 has many design features to mitigate the consequences of severe accident phenomena, it is not surprising that the aspects of both release fractions and durations are distinctly different from NUREG-1465. This RST will be continuously updated to reflect to the design features of EU-APR1400, and then, be used as the reference for design purposes such as criteria satisfaction of radioactivity releases, equipment survivability, control room habitability for severe accident, and so on.

  13. APR1400 CEA Withdrawal at Power Accident Analysis using KNAP

    International Nuclear Information System (INIS)

    Lee, Dong-Hyuk; Yang, Chang-Keun; Kim, Yo-Han; Sung, Chang-Kyung

    2006-01-01

    KEPRI (Korea Electric Power Research Institute) has been developing safety analysis methodology for non- LOCA (Loss Of Coolant Accident) analysis of OPR1000 (Optimized Power Reactor 1000, formerly KSNP). The new methodology, named KNAP (Korea Non-LOCA Analysis Package), uses RETRAN as the main system analysis code. RETRAN code is a non- LOCA safety analysis code developed by EPRI. The new methodology will replace existing CE (Combustion Engineering) supplied codes and methodologies currently used in non-LOCA analysis of OPR1000. In this paper, we apply KNAP methodology to APR1400 (Advanced Power Reactor 1400). The CEA (Control Element Assembly) withdrawal at power accident is one of the 'reactivity and power distribution anomalies' events and the results are typically described in the chapter 15.4.2 of SAR (Safety Analysis Report). The APR1400 has been designed to generate 1,400MWe of electricity with advanced features for greatly enhanced safety and economic goals. The CEA withdrawal at power analysis in APR1400 SSAR (Standard Safety Analysis Report) is analyzed with CESEC-III computer code. In this study, to confirm the applicability of the KNAP methodology and code system to APR1400, CEA withdrawal at power accident is analyzed using RETRAN code and it is compared with results from APR1400 SSAR

  14. Untitled

    African Journals Online (AJOL)

    en nutriments dans les especes de Vermonia amer (V. amygdalina, V. cahoana var. amere) et non amer (V. colorata et V. cahoana var. non amere) rencontrées au Cameroun. Les traitements utilisés sont le lavage, le lavage après blanchiment Sans natron, le lavage après blanchiment avec une concentration de natron.

  15. Les coûts du diabète sur 10 ans au Canada : intégration des coûts en soins de santé imputables au diabète à un modèle de prédiction de son incidence

    Directory of Open Access Journals (Sweden)

    Anja Bilandzic

    2017-01-01

    Full Text Available Introduction : Notre objectif était d’estimer les coûts de santé directs liés au traitement du diabète au Canada sur 10 ans, à l’aide de données de sondages nationaux et d’un outil de prévision du risque de diabète, ainsi que les coûts par personne. Méthodologie : Nous avons utilisé le Diabetes Population Risk Tool pour estimer le nombre de nouveaux cas de diabète chez les personnes âgées de 20 ans et plus sur 10 ans (jusqu'en 2022 à l’aide des données de 2011 et de 2012 de l’Enquête sur la santé dans les collectivités canadiennes. Nous avons évalué les coûts liés au diabète à partir d’une étude de cohorte faisant appel à l’appariement par score de propension, en utilisant la base de données sur le diabète de l’Ontario ainsi que d’autres données administratives. Nous avons calculé les coûts totaux en utilisant les coûts associés aux nouveaux cas, en tenant compte du sexe, de l’année du diagnostic et des taux de mortalité annuels dus à la maladie. Résultats : D'après nos calculs, le risque de développer le diabète sur 10 ans s’élevait pour la population canadienne en 2011-2012 à 9,98 %, soit 2,16 millions de nouveaux cas. Les coûts totaux en soins de santé imputables au diabète pendant cette période sont de 15,36 milliards (7,55 milliards pour les femmes et 7,81 milliards pour les hommes. Ce sont les hospitalisations de courte durée qui constituent la majeure partie de ces coûts (43,2 %. Des interventions menées au sein de la population entraînant une perte de poids de 5 % au sein de la population permettraient de réduire les coûts des soins de santé de 2,03 milliards de dollars. Une réduction du risque de 30 % obtenue grâce à des interventions auprès des personnes à plus haut risque de développer le diabète (c.-à-d. les 10 % au sommet du groupe à risque le plus élevé entraînerait des économies de l’ordrede 1,48 million de dollars. Conclusion : D'ici 2022

  16. Prediction du profil de durete de l'acier AISI 4340 traite thermiquement au laser

    Science.gov (United States)

    Maamri, Ilyes

    Les traitements thermiques de surfaces sont des procedes qui visent a conferer au coeur et a la surface des pieces mecaniques des proprietes differentes. Ils permettent d'ameliorer la resistance a l'usure et a la fatigue en durcissant les zones critiques superficielles par des apports thermiques courts et localises. Parmi les procedes qui se distinguent par leur capacite en terme de puissance surfacique, le traitement thermique de surface au laser offre des cycles thermiques rapides, localises et precis tout en limitant les risques de deformations indesirables. Les proprietes mecaniques de la zone durcie obtenue par ce procede dependent des proprietes physicochimiques du materiau a traiter et de plusieurs parametres du procede. Pour etre en mesure d'exploiter adequatement les ressources qu'offre ce procede, il est necessaire de developper des strategies permettant de controler et regler les parametres de maniere a produire avec precision les caracteristiques desirees pour la surface durcie sans recourir au classique long et couteux processus essai-erreur. L'objectif du projet consiste donc a developper des modeles pour predire le profil de durete dans le cas de traitement thermique de pieces en acier AISI 4340. Pour comprendre le comportement du procede et evaluer les effets des differents parametres sur la qualite du traitement, une etude de sensibilite a ete menee en se basant sur une planification experimentale structuree combinee a des techniques d'analyse statistiques eprouvees. Les resultats de cette etude ont permis l'identification des variables les plus pertinentes a exploiter pour la modelisation. Suite a cette analyse et dans le but d'elaborer un premier modele, deux techniques de modelisation ont ete considerees, soient la regression multiple et les reseaux de neurones. Les deux techniques ont conduit a des modeles de qualite acceptable avec une precision d'environ 90%. Pour ameliorer les performances des modeles a base de reseaux de neurones, deux

  17. Evaluation of the Planned Outage Durations in EU-APR

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Byung Joon; Lee, Keun Sung [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    EU-APR has been designed to comply with European Utility Requirements (EUR) and nuclear design requirements of the European countries. And it is modified and improved from its original design of APR1400. The whole duration varies depending on items for additional process. Refueling and regular maintenance outage is comprised of basic processes and Main turbine-generator outage includes dismantling inspection of main generator and high pressure turbine as a critical path in addition to basic processes. In-Service Inspection Outage includes Automatic ultrasonic inspection on the upper side/lower side of a nuclear reactor as a critical path in addition to basic processes. The planned outage durations of EU-APR are optimized according to the above results. And they are complied with EUR Requirement (EUR 2.2.7.2.2 B), respectively. In addition, outage duration can be reduced with improved operating technology and more maintenance friendly environment including betterment of filling, drain and ventilation.

  18. Evaluation of the Planned Outage Durations in EU-APR

    International Nuclear Information System (INIS)

    Jung, Byung Joon; Lee, Keun Sung

    2016-01-01

    EU-APR has been designed to comply with European Utility Requirements (EUR) and nuclear design requirements of the European countries. And it is modified and improved from its original design of APR1400. The whole duration varies depending on items for additional process. Refueling and regular maintenance outage is comprised of basic processes and Main turbine-generator outage includes dismantling inspection of main generator and high pressure turbine as a critical path in addition to basic processes. In-Service Inspection Outage includes Automatic ultrasonic inspection on the upper side/lower side of a nuclear reactor as a critical path in addition to basic processes. The planned outage durations of EU-APR are optimized according to the above results. And they are complied with EUR Requirement (EUR 2.2.7.2.2 B), respectively. In addition, outage duration can be reduced with improved operating technology and more maintenance friendly environment including betterment of filling, drain and ventilation

  19. Complications du traitement traditionnel des fractures : à propos de ...

    African Journals Online (AJOL)

    Nos objectifs ont été de faire une étude épidémiologique, de rechercher les raisons du choix initial de cette médecine par les patients et celles qui les incitent à ... Matériel et méthode : Il s'agissait d'une étude prospective sur un an (1e juillet 2005 au 30 juin 2006) Le recrutement des patients a été fait aux services des ...

  20. Impact des traitements physicochimiques sur la clarte des hydrogels ...

    African Journals Online (AJOL)

    Méthodes : La préparation est réalisée selon la méthode décrite par PINGNAULT utilisant 4% (P/P) d'amidon en base sèche.Sur les gels obtenu ont été déterminés successivement l'influence de la conservation au froid (4°C) par la méthode de CRAIG, de la longueur d'onde entre 400 et 700 nm, de la concentration en ...

  1. Development of Nanosatellite Technology with APRS Module for Disaster Mitigation

    Science.gov (United States)

    Prahyang, S. Y.; Dhiya’Ulhaq, M. Z.; Golim, O. P.; Gunawan, R.; Suhandinata; Jahja, E.; Nelwan, E. R. G.; Ananta, C.; Chow, I. M.; Mali, N. D. F.

    2018-05-01

    Development of nanosatellite technology has enabled satellites to be developed with multiple capabilities for a specific mission in a short time with a low cost. Satellite communications are proved to be more effective in delivering information due to its large coverage area. Surya Satellite-1 will become the first Indonesian nanosatellite developed by undergraduate students. It is designed with low-cost commercial payloads, including an APRS module for communication and operated on VHF and UHF amateur radio frequencies. The mission of the satellites focused on disaster mitigation through APRS communication network with remote stations located on disaster-prone areas.

  2. From après-ski to après-tourism: the Alps in transition?

    Directory of Open Access Journals (Sweden)

    Philippe Bourdeau

    2009-12-01

    Full Text Available Winter sports occupy a prominent place in European tourism, not only because of their economic importance in mountainous areas but also due to their major symbolic significance in the "leisure civilisation". Yet the world of winter tourism is full of uncertainties connected with climate change and also with evolutions and structural breaks that call into question the development model on which it is based. This context of profound change gives us the opportunity to question the limits of the industrial model that has governed the development of the Alps for the practice of skiing and to examine alternative future scenarios to "all-out skiing" and even "all-out tourism".Les sports d’hiver occupent une place de premier plan dans le tourisme européen, non seulement du fait de leur poids économique dans les régions de montagne, mais aussi par leur forte dimension symbolique dans la « civilisation des loisirs ». Pourtant l’univers du tourisme hivernal est parcouru par de nombreuses incertitudes liées au changement climatique, mais aussi à des évolutions et des ruptures structurelles qui remettent en question le modèle de développement sur lequel il repose. Ce contexte de mutation permet d’interroger les limites du modèle industriel qui a présidé à l’aménagement des Alpes pour la pratique du ski et d’examiner des figures d’avenir alternatives au « tout ski » et même au « tout tourisme ».

  3. Comment ameliorer la selection et le traitement des messages verbaux? (How to Improve the Selection and Processing of Verbal Messages)

    National Research Council Canada - National Science Library

    Rivenez, Marie; Darwin, Chris; Guillaume, Anne

    2005-01-01

    L'objectif de cette recherche est d'ameliorer la selection des messages verbaux. Nous cherchons a determiner les facteurs influencant le traitement d'un message verbal lorsque l'attention est portee sur un autre message...

  4. EFFET DES TRAITEMENTS THERMIQUES SUR LA REACTION ENTRE DES COUCHES MINCES DE TITANE ET DES SUBSTRATS EN ACIER

    Directory of Open Access Journals (Sweden)

    D Slimani

    2015-06-01

    Full Text Available Des couches minces du titane pur ont été déposées avec la méthode de pulvérisation cathodique sur des substrats en acier, type FF80 K-1 contenants ~1% mass. en carbone. La réaction entre les deux parties du système substrat-couche mince est activée avec des traitements thermiques sous vide dans l’intervalle de températures de 400 à900°Cpendant 30 minutes. Les Spectres de diffraction de rayons x confirment l’inter- diffusion des éléments  chimiques du système résultants la formation et la croissance des nouvelles phases en particulier le carbure binaire TiC ayant des caractéristiques thermomécaniques importantes. L’analyse morphologique des échantillons traités  avec le microscope électronique à balayage (MEB montre l’augmentation du flux de diffusion atomique avec la température de recuit, notamment la diffusion du manganèse et du fer vers la surface libre des échantillons aux températures élevées provoquant la dégradation des propriétés mécaniques des revêtements contrairement au premiers stades d’interaction où on a obtenu des bonnes valeurs de la microdureté.

  5. The determination of iodine in biological media using radioactivation analysis (1962); Dosage de l'iode dans les milieux biologiques au moyen de l'analyse par radioactivation (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Comar, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-06-15

    The object of this study is to show that the application of radioactivation analysis to the determination of iodine in biological media makes it possible to measure iodine concentrations of the order of 0.0001 {mu}g. After a review of the chemical methods with a mention of the difficulties they present, the optimum conditions for the determination of iodine in biological liquids are given. Three methods are described: - the first consists of a chemical treatment which liberates the protein bound iodine in an inorganic form. After distillation this iodine is irradiated in a flux of thermal neutrons. The induced radioactivity is compared to that of a standard sample irradiated in the same conditions by {gamma} spectrometry. - the second method which is of more general application consists in irradiating the sample and then extracting the iodine; its induced radio-activity is then measured by {beta}-counting. - the third method measures the iodine directly in the thyroid tissue by anti-compton spectrometry. The sensitivity, the reproducibility and the accuracy are discussed. Some applications are described: determination of iodine in its various organic forms in serum, determination of iodine in urines, in food-stuffs, etc., in the thyroid tissue, etc. (author) [French] Le but de cette etude est de montrer que l'analyse par radioactivation appliquee au dosage de l'iode dans les milieux biologiques permet de mesurer des taux d'iode de l'ordie de 0,0001 {mu}g. Apres avoir rappele le principe des methodes chimiques et montre les difficultes de leur mise en oeuvre, il est etabli les conditions optima pour realiser le dosage de l'iode dans les liquides biologiques. Trois methodes sont decrites; - la premiere consiste a pratiquer un traitement chimique liberant l'iode proteique sous forme minerale. Apres distillation cet iode est irradie dans un flux de neutrons thermiques. La radioactivite induite est mesuree comparativement a celle d'un etalon traite dans les memes

  6. Améliorer le traitement de la douleur chez les enfants en Thaïlande ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    21 avr. 2016 ... FLIKR/ROSS POLLOCK. Des lignes directrices sur la gestion de la douleur dans les hôpitaux thaïlandais aident à prévenir ou à traiter la douleur chez les enfants. Global Health Research Initiative. Les enfants sont plus susceptibles que les adultes de souffrir de l'absence de traitement ou de traitement ...

  7. Quantification de la Charge Virale et tests de résistance du VIH-1 aux ARV à partir d’échantillons DBS (Dried Blood Spots chez des patients Guinéens sous traitement antirétroviral

    Directory of Open Access Journals (Sweden)

    Nestor Bangoura

    2015-06-01

    Full Text Available Problématique: Comme dans plusieurs pays du Sud, le suivi virologique des patients sous traitement antirétroviral (TARV en Guinée est timide voire inexistant dans certaines localités. Le but de cette étude était d’évaluer la faisabilité technique et logistique de l’utilisation des DBS dans les tests de charge virale (CV et de génotypage. Méthode: De septembre à octobre 2010, les DBS ont été préparés à partir de prélèvements sanguins de patients adultes sous TARV. Le délai d’envoi des échantillons au laboratoire de référence était de 30 jours maximum après le prélèvement et se faisait à température ambiante. La CV a été quantifiée et les échantillons de patients en échec virologique (CV ≥ 3 log10 copies/mL ont été génotypés selon le protocole de l’ANRS. L’algorithme de Stanford version 6.0.8 a été utilisé pour l’analyse et l’interprétation des mutations de résistance. Résultats: Parmi les 136 patients inclus, 129 et 7 étaient respectivement sous première et deuxième ligne de traitement avec une médiane de suivi de 35 mois [IQR: 6-108]. L’échec virologique a été noté chez 33 patients. Parmi eux, 84.8% (n = 28/33 ont bénéficié d’ungénotypage. Le taux de résistance global était de 14% (n = 19/136. Le CRF02_AG était le sous type viral le plus prévalent (82%; n = 23. Conclusion: En plus de montrer la faisabilité technique et logistique des tests de CV et de génotypage à partir des DBS, ces résultats montrent l’intérêt de leurs utilisations dans le suivi virologique des patients sous TARV. Cette étude a permis également de documenter l’échec virologique, la résistance aux ARV et la diversité génétique du VIH-1 en Guinée. Mots clés: VIH-1, Résistance aux ARV, DBS (Dried Blood Spots, Guinée Conakry, Génotypage,Charge Virale.   Quantification of Viral load and resistance tests of HIV-1 to ARVs from dried blood spotssamples in Guinean patients undergoing

  8. APR1400 Locked Rotor Transient Analysis using KNAP

    International Nuclear Information System (INIS)

    Lee, Dong-Hyuk; Kim, Yo-Han; Ha, Sang Jun

    2007-01-01

    KEPRI (Korea Electric Power Research Institute) has developed safety analysis methodology for non-LOCA (Loss Of Coolant Accident) analysis of OPR1000 (Optimized Power Reactor 1000, formerly KSNP). The new methodology, named KNAP (Korea Non-LOCA Analysis Package), uses RETRAN as the main system analysis code for most transients. For locked rotor transient DNBR analysis, UNICORN-TM code is used. UNICORN-TM is the unified code of RETRAN, MASTER and TORC. The UNICORN-TM has 1-D and 3-D neutron kinetics calculation capability. For locked rotor DNBR analysis, 1-D neutron kinetics is used. In this paper, we apply KNAP methodology to APR1400 (Advanced Power Reactor 1400) locked rotor analysis and compare the results with those in the APR1400 SSAR(Standard Safety Analysis Report). The locked rotor transient is one of the 'decrease in reactor coolant system flow rate' events and the results are typically described in the chapter 15.3.3 of SAR (Safety Analysis Report). In this study, to confirm the applicability of the KNAP methodology and code system to APR1400, locked rotor transient is analyzed using UNICORN-TM code and the results are compared with those from APR1400 SSAR

  9. System Response Analysis of LOCV for APR1400 Using KNAP

    International Nuclear Information System (INIS)

    Kim, Yo-Han; Sung, Chang-Kyung; Jun, Hwang-Yong

    2006-01-01

    Korea Electric Power Research Institute (KEPRI) of Korea Electric Power Corporation (KEPCO) has been developed the non-loss-of-coolant accident (non-LOCA) analysis methodology, called as the Korea Non-LOCA Analysis Package (KNAP), for the typical Optimized Power Reactor 1000 (OPR1000) plants. Considering current licensing methodology conducted by ABB-CE, however, the KNAP could be applied to Advanced Power Reactor 1400 (APR1400). In spite of some difference in components of two plant types, there is a close resemblance between their nuclear steam supply systems (NSSS). So, in this study, the loss of condenser vacuum (LOCV) event were analyzed using KNAP for APR1400 to estimate the feasibility of the application and the results were compared with those given in APR1400 Standard Safety Analysis Report (SSAR), which were calculated using the CESEC-III code of ABB-CE. Through the study, it was concluded that the KNAP could be applicable to APR1400 on the view point of LOCV event

  10. Functional Requirement Analysis and Function Allocation for APR 1400

    International Nuclear Information System (INIS)

    Nuraslinda, Anuar; Florah, Kamanja; Noloyiso, Mtoko and others

    2013-01-01

    This paper intends to fulfill the FRA and FA of the HFE as required in Chapter 4 of NUREG-0711 rev. 3 for APR1400 to satisfy both plant safety and power generation objectives. This paper aims to evaluate the FRA and FA for APR1400. The allocation of function is done at the system level for all processes for both the power generation and safety goals, following the NUREG/CR-3331 guideline. As a conclusion, this paper has successfully implemented the requirements and methodology specified in NUREG-0711 for APR 1400. The Functional Requirement Analysis (FRA) and Function Allocation (FA) are required by the regulation in the Human Factors Engineering (HFE) program. The FRA defines the functions, processes, and system for plant safety and power generation. The FA allocates the functions to human operator, automation, or a combination of two. The FRA and FA for APR1400 have been performed in the very early stage of development but only for the plant safety. However, the analysis did not include the goal of power generation and also did not fully satisfy the latest revision of NUREG-0711

  11. APR1400 Locked Rotor Transient Analysis using KNAP

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dong-Hyuk; Kim, Yo-Han; Ha, Sang Jun [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

    2007-07-01

    KEPRI (Korea Electric Power Research Institute) has developed safety analysis methodology for non-LOCA (Loss Of Coolant Accident) analysis of OPR1000 (Optimized Power Reactor 1000, formerly KSNP). The new methodology, named KNAP (Korea Non-LOCA Analysis Package), uses RETRAN as the main system analysis code for most transients. For locked rotor transient DNBR analysis, UNICORN-TM code is used. UNICORN-TM is the unified code of RETRAN, MASTER and TORC. The UNICORN-TM has 1-D and 3-D neutron kinetics calculation capability. For locked rotor DNBR analysis, 1-D neutron kinetics is used. In this paper, we apply KNAP methodology to APR1400 (Advanced Power Reactor 1400) locked rotor analysis and compare the results with those in the APR1400 SSAR(Standard Safety Analysis Report). The locked rotor transient is one of the 'decrease in reactor coolant system flow rate' events and the results are typically described in the chapter 15.3.3 of SAR (Safety Analysis Report). In this study, to confirm the applicability of the KNAP methodology and code system to APR1400, locked rotor transient is analyzed using UNICORN-TM code and the results are compared with those from APR1400 SSAR.

  12. 1001.pdf | 25apr2010 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    2010-04-25

    Apr 25, 2010 ... error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube · Twitter · Facebook · Blog. Academy News. IAS Logo. Summer Research Fellowship Programme 2018. Dates Extended To 7 December 2017. Register here · Focus Area Science ...

  13. Profil hormonal chez l’homme en cas d’infertilité au laboratoire de radio immunologie de l’institut des radioisotopes de Niamey

    Directory of Open Access Journals (Sweden)

    D. Moussa

    2016-12-01

    Conclusion: Les endocrinopathies susceptibles de donner une infertilité masculine sont nombreuses; elles peuvent être congénitales ou acquises et concerner plusieurs étages, hypothalamo-hypophysaire, testiculaire. D’où la nécessité de réaliser un bilan hormonal en vue de dresser un diagnostic précis; ceci est d’autant plus important que certaines de ces endocrinopathies sont accessibles au traitement.

  14. Pseudomonas syringae evades host immunity by degrading flagellin monomers with alkaline protease AprA.

    Science.gov (United States)

    Pel, Michiel J C; van Dijken, Anja J H; Bardoel, Bart W; Seidl, Michael F; van der Ent, Sjoerd; van Strijp, Jos A G; Pieterse, Corné M J

    2014-07-01

    Bacterial flagellin molecules are strong inducers of innate immune responses in both mammals and plants. The opportunistic pathogen Pseudomonas aeruginosa secretes an alkaline protease called AprA that degrades flagellin monomers. Here, we show that AprA is widespread among a wide variety of bacterial species. In addition, we investigated the role of AprA in virulence of the bacterial plant pathogen P. syringae pv. tomato DC3000. The AprA-deficient DC3000 ΔaprA knockout mutant was significantly less virulent on both tomato and Arabidopsis thaliana. Moreover, infiltration of A. thaliana Col-0 leaves with DC3000 ΔaprA evoked a significantly higher level of expression of the defense-related genes FRK1 and PR-1 than did wild-type DC3000. In the flagellin receptor mutant fls2, pathogen virulence and defense-related gene activation did not differ between DC3000 and DC3000 ΔaprA. Together, these results suggest that AprA of DC3000 is important for evasion of recognition by the FLS2 receptor, allowing wild-type DC3000 to be more virulent on its host plant than AprA-deficient DC3000 ΔaprA. To provide further evidence for the role of DC3000 AprA in host immune evasion, we overexpressed the AprA inhibitory peptide AprI of DC3000 in A. thaliana to counteract the immune evasive capacity of DC3000 AprA. Ectopic expression of aprI in A. thaliana resulted in an enhanced level of resistance against wild-type DC3000, while the already elevated level of resistance against DC3000 ΔaprA remained unchanged. Together, these results indicate that evasion of host immunity by the alkaline protease AprA is important for full virulence of strain DC3000 and likely acts by preventing flagellin monomers from being recognized by its cognate immune receptor.

  15. Co-infection tuberculose et VIH: Hausse des CD4 avec le traitement ...

    African Journals Online (AJOL)

    INTRODUCTION: L'administration parallèle d'antituberculeux et d'antirétroviraux chez nos patients co-infectés par la tuberculose et le virus de l'immunodéficience humaine (VIH) nous a fait observer près de 25 % d'hépatites toxiques conduisant à l'arrêt de tous traitements. Nous avons ainsi dû mener ce travail en ...

  16. Economic Management of a Centre for Processing Radioactive Residues; Gestion Economique D'un Centre de Traitement de Residus Radioactifs; Ehkonomicheskij aspekt obrashcheniya s radioaktivnymi otkhodami v obrabatyvayushchem tsentre; Gestion Economica de un Centro de Tratamiento de Desechos Radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Van Lint, J. M. [BELGONUCLEAIRE, Bruxelles (Belgium)

    1966-02-15

    The paper shows the differences between the operations of an industrial undertaking and an installation for residue processing and describes the auditing system of an industry concerned with various phases of processing. It shows that the auditing programme is necessarily and intimately connected with the general organization of the entire undertaking and that it is a useful tool of economic management. In this connection, the paper deals at length with the auditing principles used in arriving at - the overall cost of the final product, - the specific cost of each processing phase,. (author) [French] Apres avoir expose les differences existant entre les operations effectuees par une entreprise industrielle et par une installation de traitement des residus, le memoire decrit la comptabilite d'une industrie comprenant plusieurs phases de traitement. Il montre comment le plan comptable est necessairement et intimement lie a l'organisation generale de l'ensemble de l'entreprise et est un outil utile de gestion economique, A cette fin, le memoire developpe les principes comptables permettant d'etablir: - le prix de revient global du produit final obtenu, - les prix de revient specifiques de chaque phase de traitement partiel. (author) [Spanish] Despues de exponer las diferencias que existen entre las operaciones efectuadas en una empresa industrial y en una instalacion de tratamiento de desechos, el autor analiza la contabilidad de una industria que comprende diversas fases de tratamiento. Muestra como el plan contable esta necesaria e intimamente vinculado a la organizacion general del conjunto de la empresa y es un instrumento util de gestion economica. Con este fin, desarrolla los principios contables que permiten establecer: - el precio de costo global del producto final obtenido, - los precios de costo especificos de cada fase de tratamiento parcial. (author) [Russian] Posle Izlozhenija Razlichij, Sushhestvujushhih Mezhdu Operacijami Na Promyshlennom Predprijatii I

  17. Implementation and Analysis for APR1400 Soft Control System

    International Nuclear Information System (INIS)

    2015-01-01

    Due to the rapid advancement of digital technology, the definite technical advantages of digital control system compared to analog control system are accelerating the implementation of advanced distributed digital control system in the nuclear power plant. One of the major advantages of digital control system is the capability of Soft Control System. The design of Soft Control System for Advanced Power Reactor 1400 (APR1400) plant of Man-Machine Interface System (MMIS) is based on full digital technologies to enhance reliability, operability and maintainability. Computer-based compact workstation has been adopted in the APR1400 Main Control Room (MCR) to provide convenient working environment. This paper introduces the approaches and methodologies of Soft Control System for the Advanced Control Room (ACR). This paper also explains major design features for operation and display of the Soft Control System and its implementation to cope with regulatory requirements. (authors)

  18. Development of the APR+ Auxiliary Building General Arrangement (GA)

    International Nuclear Information System (INIS)

    Moon, Hyung Keun; Park, Young Sheop; Kang, Yong Chul

    2011-01-01

    The general arrangement (GA) drawing of a nuclear power plant is the most basic drawing which contains all of the plant equipment, systems, and rooms. Therefore, it should be issued at an early design stage to provide the contours of the overall plant structure. This type of drawing is typically used widely throughout the design stages. The development project of APR+ (Advanced Power Reactor+), as a succeeding model of the APR1400 (Advanced Power Reactor 1400) design, has its own GA that encompasses all of its power buildings. This was developed starting in October of 2009. Among several of the buildings in this design, the Auxiliary Building (AB) is one of the most important buildings to produce electricity, and to protect against undesirable radiation emissions. This paper focuses on the design characteristics of the general arrangement of the AB

  19. Verbal Communication in the APR1400 Advanced Control Room

    International Nuclear Information System (INIS)

    Kim, Jong Hyun; Shin, Young Cheol

    2007-01-01

    This paper introduces the characteristics of communication in advanced main controlghd rooms (MCRs) and some observations from a case study performed for APR1400 MCR. In advanced MCRs, operators need not maintain the same communication patterns as they do in conventional ones. For example, a senior reactor operator (SRO) does not have to rely on board operators for information acquisition and can get any information from his/her own workstation. This situation may also bring about new problems in MCRs such as lack of shared situation awareness and collaboration between MCR operators. To cope with these problems, the APR1400 MCR adapts several approaches in design and training for encouraging operators to communicate with each other. This paper introduces the possible changes of communication patterns and the countermeasures in design and training. Some findings from an integrated system validation for Shin Kori Units 3 and 4 are also presented

  20. Preliminary Results Of LOCA Problem For APR1400 Reactor

    International Nuclear Information System (INIS)

    Le Dai Dien; Hoang Minh Giang; Le Thi Thu; Vo Thi Huong; Le Van Hong

    2011-01-01

    Several features of NPP with APR1400 nuclear reactor during a loss of coolant accident (LOCA) are investigated in this study. The report describes some main design characteristics of an engineering safety systems of APR1400 and the thermal hydraulic calculation results for steady-state using MARS and RELAP/SCDAPSIM codes. Large Break LOCA accident has been analyzed and evaluated based on acceptable criteria for ECCS given by US NRC. The results from cold leg break LOCA with broken area of 0.0465 m 2 in case of high pressure safety injection system (HPSI) failed to operate or 2 and 4 HPSI pumps are activated. The preliminary results of this work is a part of collaboration between INST researchers and KAERI experts in using RELAP tool for safety analysis of NPPs. (author)

  1. Étude des obstacles au traitement du VIH et à la santé maternelle en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    4 avr. 2013 ... Plus de 200 chercheurs en santé mondiale se sont réunis à Ottawa pour ... les facteurs qui entravent l'accès à des soins de santé en Afrique du Sud. ... de transport en commun et le refus des chauffeurs d'ambulance de se ...

  2. 967.pdf | 10apr2010 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    2010-04-10

    Apr 10, 2010 ... error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held from 29–30 June 2018 ...

  3. Design features of Advanced Power Reactor (APR) 1400 steam generator

    International Nuclear Information System (INIS)

    Park, Tae-Jung; Park, Jun-Soo; Kim, Moo-Yong

    2004-01-01

    Advanced Power Reactor 1400 (APR 1400) which is to achieve the improvement of the safety and economical efficiency has been developed by Korea Hydro and Nuclear Power Co., Ltd. (KHNP) with the support from industries and research institutes. The steam generator for APR 1400 is an evolutionary type from System 80 + , which is the recirculating U-tube heat exchanger with integral economizer. Compared to the System 80 + steam generator, it is focused on the improved design features, operating and design conditions of APR 1400 steam generator. Especially, from the operation experience of Korean Standard Nuclear Power Plant (KSNP) steam generator, the lessons-learned measures are incorporated to prevent the tube wear caused by flow-induced vibration (FIV). The concepts for the preventive design features against FIV are categorized to two fields; flow distribution and dynamic response characteristics. From the standpoint of flow distribution characteristics, the egg-crate flow distribution plate (EFDP) is installed to prevent the local excessive flow loaded on the most susceptible tube to wear. The parametric study is performed to select the optimum design with the efficient mitigation of local excessive flow. ATHOS3 Mod-01 is used and partly modified to analyze the flow field of the APR 1400 steam generator. In addition, the upper tube bundle support is designed to eliminate the presence of tube with a low natural frequency. Based on the improved upper tube bundle support, the modal analysis is performed and compared with that of System 80 + . Using the results of flow distribution and modal analysis, the two mechanisms of flow-induced vibration are investigated; fluid-elastic instability (FEI) and random turbulence excitation (RTE). (authors)

  4. 897.pdf | apr102004 | currsci | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; currsci; apr102004; 897.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  5. Pseudomonas syringae evades host Immunity by degrading flagellin monomers with alkaline protease AprA

    OpenAIRE

    Pel, M.J.C.; Van Dijken, A.J.H.; Bardoel, B.W.; Seidl, M.F; Van der Ent, S.; Van Strijp, J.A.G.

    2014-01-01

    Bacterial flagellin molecules are strong inducers of innate immune responses in both mammals and plants. The opportunistic pathogen Pseudomonas aeruginosa secretes an alkaline protease called AprA that degrades flagellin monomers. Here, we show that AprA is widespread among a wide variety of bacterial species. In addition, we investigated the role of AprA in virulence of the bacterial plant athogen P. syringae pv. tomato DC3000. The AprA-deficient DC3000 ΔaprA knockout mutant was significantl...

  6. Non-Integrated Standalone Tests of APR1400 Simulator

    International Nuclear Information System (INIS)

    Hwang, Su Hyun; Lee, Jeong Ik; Hong, Soon Joon; Lee, Byung Chul; Seo, Jeong Gwan; Lee, Myung Soo

    2007-01-01

    APR1400 being developed for the construction of New Kori 3 and 4 Units has improved safety and more economical efficiency compared with previous PWR. The ESF(Engineered Safety Features) newly introduced to enhance safety are as follows: DVI (Direct Vessel Injection), Fluidic Device, IRWST (In-containment Refueling Water Storage Tank). So the transient pattern of anticipated accidents will show different characteristics from previous PWR. There are multidimensional flow phenomena like as emergency core cooling coolant bypass discharge in the downcomer, downcomer boiling, and different safety injection characteristics due to fluidic device during LBLOCA. Also there is the phenomenon of critical flow due to the open of pressurizer POSRV (Pilot Operated Safety Relief valve) connected to IRWST and safety depressurization system and the prediction of discharge flow is very important. KEPRI is developing APR1400 simulator using RELAP-RT . RELAP-RT was developed by DS and S (Data systems and Solutions) based on RELAP5/MOD3.2. The improved features of RELAP-RT to function as a simulator are as follows: Add simulator functionality - Control by simulator executive - IC snap and reset capability - Back-track snap and reset capability - Fast time capability. Fast time capability(examples) - The rate of condensation has been limited. - Fictional choking model has been developed for internal junctions. - Wall heat transfer coefficients and heat fluxes has been limited. In this study, various NISTs (Non-Integrated Standalone Tests) were performed to verify the capability of RELAP-RT as APR1400 simulator by the comparison with RELAP5/MOD3.3

  7. Tuberculose hépatique nodulaire: complication inhabituelle au cours de la maladie de Wilson

    Science.gov (United States)

    Zinebi, Ali; Rkiouak, Adil; Akhouad, Youssef; Reggad, Ahmed; Kasmy, Zohor; Boudlal, Mostapha; Rabhi, Monsef; Ennibi, Khalid; Chaari, Jilali

    2014-01-01

    La tuberculose hépatique nodulaire est rare. Nous rapportons une forme pseudo-tumorale dont le tableau clinico-biologique et radiologique initial était aspécifique. Il s'agit d'un jeune marocain suivi pour maladie de Wilson et présentant une fièvre au long cours. L'imagerie met en évidence une lésion nodulaire hépatique non spécifique. L'examen anatomo-pathologique au cours d'une biopsie écho guidée du nodule hépatique permit de porter le diagnostic. L’évolution clinique est favorable sous traitement spécifique. PMID:24932333

  8. Treatment of uranium ores by natural leaching in Portugal; Traitement par lixiviation naturelle des minerais uraniferes portugais

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, J de [Junta de Energia Nuclear, Lisbonne (Portugal)

    1967-06-15

    The technique described for treating uranium ores by natural leaching has been developed as a result of research carried out in Portugal with a view to determining and eliminating the causes of uranium migration in ores stored in the open. With the natural leaching method, which has been successfully applied to primary uranium ores, the ore is piled up on a waterproof surface and sprayed intermittently with mine water. Pyrite and ferrous sulphate are used as solid reagents and are mixed with the ore in amounts averaging 0.4% and 0.2% respectively. Over 70 000 tons of ore with a U{sub 3}O{sub 8} content of between 0.076 and 0.150% have been treated at five natural leaching plants. The average recovery in these operations was between 57.7 and 85.9%. The average cost was US $3.31/lb U{sub 3}O{sub 8}. (author) [French] Le traitement des minerais uraniferes par lixiviation naturelle est le fruit des recherches effectuees au Portugal dans le but de determiner et d'eliminer les causes de la migration de l'uranium contenu dans les minerais emmagasines a ciel ouvert. La methode de lixiviation naturelle, appliquee avec succes aux mineraux primaires d'uranium, consiste essentiellement en l'arrosage intermittent, avec l'eau des mines, du minerai entasse sur des aires impermeabilisees. On utilise comme reactifs solides la pyrite et le sulfate ferreux melanges avec le minerai a raison de 0,4% et 0,2% respectivement en moyenne. Plus de 70 000 t de minerai, dont les teneurs en U{sub 3}O{sub 8} etaient comprises entre 0,076% et 0,150%, ont ete traitees dans cinq installations de lixiviation naturelle ou on a obtenu des recuperations moyennes oscillant entre 57,7% et 85,9%, pour le prix de revient moyen de 3,31 dollars par livre de U{sub 3}O{sub 8}. (author)

  9. Design of a Load Following Controller for APR+ Nuclear Plants

    International Nuclear Information System (INIS)

    Lee, Sim Won; Kim, Jae Hwan; Kim, Dong Su; Na, Man Gyun; Yu, Keuk Jong

    2011-01-01

    The load-following operation of an APR+ nuclear plants is required to restrain the adjustment of boric acid concentration and to efficiently control the control rods for the flexibility of the operation. Especially, axial flux distribution disproportion that is usually caused by load-following operation in a reactor core induces xenon oscillation because the absorption cross-section of xenon is extremely large and its effects in a reactor are delayed by the iodine precursor. Rapid and smooth power maneuvering has its benefits in view of the economical and safe operation of reactors, so it is required that the controller is efficiently designed. Therefore, the load-following operation of an APR+ nuclear plants needs the ultimate automatic control and the advanced control method that satisfies the conditions such as the flexibility, safety and convenience. A model predictive control (MPC) method is applied to design an automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control for an APR+ nuclear plants. Some tracking controllers use only the current tracking command. On the other hand, since MPC considers future commands in addition to the current tracking command, the MPC can achieve better tracking performance. Therefore, the MPC has been applied very much to the control of industrial process systems. The basic concept of the MPC is to solve an optimization problem for generating finite future control inputs at current time and to implement as the current control input only the first control input among the solutions of the finite time steps. At the next time step, the second control input is not implemented and the procedure to solve the optimization problem is then repeated. The power level and the ASI are controlled by the regulating control banks and part-strength control banks together with the automatic adjustment of boric acid concentration. The 3-dimensional MASTER code, which models the APR+ nuclear

  10. Design of a Load Following Controller for APR+ Nuclear Plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sim Won; Kim, Jae Hwan; Kim, Dong Su; Na, Man Gyun [Chosun University, Gwnagju (Korea, Republic of); Yu, Keuk Jong [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2011-08-15

    The load-following operation of an APR+ nuclear plants is required to restrain the adjustment of boric acid concentration and to efficiently control the control rods for the flexibility of the operation. Especially, axial flux distribution disproportion that is usually caused by load-following operation in a reactor core induces xenon oscillation because the absorption cross-section of xenon is extremely large and its effects in a reactor are delayed by the iodine precursor. Rapid and smooth power maneuvering has its benefits in view of the economical and safe operation of reactors, so it is required that the controller is efficiently designed. Therefore, the load-following operation of an APR+ nuclear plants needs the ultimate automatic control and the advanced control method that satisfies the conditions such as the flexibility, safety and convenience. A model predictive control (MPC) method is applied to design an automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control for an APR+ nuclear plants. Some tracking controllers use only the current tracking command. On the other hand, since MPC considers future commands in addition to the current tracking command, the MPC can achieve better tracking performance. Therefore, the MPC has been applied very much to the control of industrial process systems. The basic concept of the MPC is to solve an optimization problem for generating finite future control inputs at current time and to implement as the current control input only the first control input among the solutions of the finite time steps. At the next time step, the second control input is not implemented and the procedure to solve the optimization problem is then repeated. The power level and the ASI are controlled by the regulating control banks and part-strength control banks together with the automatic adjustment of boric acid concentration. The 3-dimensional MASTER code, which models the APR+ nuclear

  11. Cost of transporting irradiated fuels and maintenance costs of a chemical treatment plant for irradiated fuels; Cout de transport des combustibles irradies et cout d'entretien d'une usine de traitement chimique des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Sousselier, Y [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    other plants, an attempt has been made to express the maintenance costs as a percentage of the investments corresponding to each of the sections considered. The unequal aspect of maintenance in a plant of this type is demonstrated, this being due particularly to the inaccessibility of most of the equipment during operation. Finally some conclusions are drawn on what the maintenance costs could be and the means of reducing them in future plants. (author) [French] Le cout du cycle des combustibles a fait l'objet de nombreuses etudes mais beaucoup d'entre elles sont basees sur des etudes a priori et sont donc plus ou moins sujettes a caution. C'est ainsi que dans la partie ayant trait au traitement des combustibles irradies, des elements importants du cout n'ont que rarement ete precises a la suite d'experiences pratiques: le cout du transport des combustibles eux-memes et le cout d'entretien de l'usine. Les etudes relatives au cout du transport sont generalement basees sur des calculs faits a partir de donnees un peu arbitraires. Les etudes qui ont ete faites en France pour le transport d'uranium irradie entre les reacteurs EdF de Chinon et l'usine de retraitement de La Hague et l'uranium irradie des reacteurs de recherches jusqu'aux usines de retraitement etrangeres sont exposees et montrent qu'il a ete possible d'arriver a des types de chateaux de transport et des modalites d'expedition qui permettent de diminuer les couts dans des proportions tres importantes. Ceci a pu etre obtenu soit en combinant les transports par rail et par route soit par l'augmentation des capacites unitaires des chateaux de transport: on cite le cas d'un chateau de transport pour element des piles piscines qui est capable de transporter un coeur complet d'une pile a la fois entrainant une reduction substantielle du cout. Les etudes concernant les couts d'entretien d'usines de retraitement sont encore plus rares, or, dans les usines a entretien direct, ces couts sont une fraction non negligeable

  12. Ultra-relativistic Au+Au and d+Au collisions:

    Science.gov (United States)

    Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Chai, Z.; Decowski, M. P.; García, E.; Gburek, T.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Hauer, M.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Seals, H.; Sedykh, I.; Skulski, W.; Smith, C. E.; Stankiewicz, M. A.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tang, J.-L.; Tonjes, M. B.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Vaurynovich, S. S.; Verdier, R.; Veres, G. I.; Wenger, E.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wuosmaa, A. H.; Wysłouch, B.

    In this talk I will review PHOBOS data on charged particle multiplicities, obtained in Au+Au and d+Au collisions at RHIC. The general features of the Au+Au pseudorapidity distributions results will be discussed and compared to those of /line{p}p collisions. The total charged particle multiplicity, scaled by the number of participant pairs, is observed to be about 40% higher in Au+Au collisions than in /line{p}p and d+Au systems, but, surprisingly at the same level of e+e- collisions. Limiting fragmentation scaling is seen to be obeyed in Au+Au collisions.

  13. Quality Control of Concrete Structure For APR1400 Construction

    International Nuclear Information System (INIS)

    Seo, Inseop; Song, Changhak; Kim, Duill

    2012-01-01

    Nuclear structure shall be constructed to protect internal facilities in the normal operation against external accidents such as the radiation shielding, earthquakes and to be leak-proof of radioactive substances to the external environment in case of loss of coolants. containment and auxiliary building of nuclear power plants are built in reinforced concrete structures to maintain these protection functions. Nuclear structures shall be designed to ensure soundness in operation since they are located on the waterfront where is easy do drain the cooling water and so deterioration and damage of concrete structures caused by seawater can occur. Durability is ensured for concrete structures of APR1400, a Korea standard NPP, in compliance with all safety requirements. In particular, owners perform quality control directly on the production and pouring of cast in place concrete for the concrete structure construction to make sure concrete structures established with quality homogeneity and durability. This report is to look into the quality control standard and management status of cast in place concrete for APR1400 construction

  14. Vibration Analysis for Steam Dryer of APR1400 Steam Generator

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sung-heum; Ko, Doyoung [KHNP CRI, Daejeon (Korea, Republic of); Cho, Minki [Doosan Heavy Industry, Changwon (Korea, Republic of)

    2016-10-15

    This paper is related to comprehensive vibration assessment program for APR1400 steam generator internals. According to U.S. Nuclear Regulatory Commission, Regulatory Guide 1.20 (Rev.3, March 2007), we conducted vibration analysis for a steam dryer as the second steam separator of steam generator internals. The vibration analysis was performed at the 100 % power operating condition as the normal operation condition. The random hydraulic loads were calculated by the computational fluid dynamics and the structural responses were predicted by power spectral density analysis for the probabilistic method. In order to meet the recently revised U.S. NRC RG 1.20 Rev.3, the CVAP against the potential adverse flow effects in APR1400 SG internals should be performed. This study conducted the vibration response analysis for the SG steam dryer as the second moisture separator at the 100% power condition, and evaluated the structural integrity. The predicted alternating stress intensities were evaluated to have more than 17.78 times fatigue margin compared to the endurance limit.

  15. Application of Nuclear Application Programs to APR1400 Simulator

    International Nuclear Information System (INIS)

    Hwang, Do Hyun; Lee, Myeong Soo; Hong, Jin Hyuk

    2012-01-01

    Advanced Power Reactor 1400MWe (APR1400) simulator has been developed and installed at Kori Training Center for operators of ShinKori no.3, 4 nuclear power plant by Korea Hydro and Nuclear Power,s Central Research Institute (KHNP CRI). NAPS (Nuclear Application Programs) is a computerbased system which provides operators with past and real-time information for monitoring and controlling NSSS (Nuclear Steam Supply System), BOP (Balance Of Plant) and Electric system. NAPS consists of several programs such as COLSS (Core Operating Limit Supervisory System), SPADES+ (Safety Parameter Display and Evaluation System), CEA (Control Element Assembly) Application Program, and so on. Each program makes calculations based on its own algorithm and provides information available for operation. In order to use NAPS programs with a simulator even though they are being used in a real plant, they should be modified to add several simulation functions such as reset, snap, run/freeze and backtrack required by ANSI/ANS-3.5 to the original NAPS functionality. On top of that, interfacing programs should be developed for the data communication between respective NAPS programs and simulator sever. The purpose of this paper is to provide the overall architecture of the communication system between NAPS and simulator model, and to describe the method to apply NAPS to APR1400 simulator

  16. Application of Standardized ITAAC to the APR1400 Design Certification

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Deogji; Kim, Yunho [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    Design certification applications (DCAs) submitted pursuant to 10 CFR Part 52 contain two tiers of information, Tier 1 and Tier 2. Tier 1 contains information that is to be certified through rulemaking, and includes the inspections, tests, analyses, and acceptance criteria (ITAAC). Tier 2 contains more detailed information and is the source for information included in Tier1. DC applicants have developed the ITAAC with their own format and contents. This has caused the ineffectiveness of the review process by Nuclear Regulatory Commission (NRC) at the design certification stage. Standardizing the format and content of Tier 1 and ITAAC will achieve greater efficiency and effectiveness for Tier 1 and ITAAC development and NRC review, and for ITAAC implementation and verification. NRC provided the proposed standardized ITAAC for APR1400, and KHNP is considering the application of the proposed ITAAC. The strategy for application of the NRC proposed standardized ITAAC to the APR1400 design certification is now under developing, and a meeting with NRC to review the NRC proposed standardized ITAAC is expected to be held in the near future. In this review process, establishment of industry position on the NRC proposed standardized ITAAC is very important. The support from NEI and US industry is expected to be gained.

  17. Application of Standardized ITAAC to the APR1400 Design Certification

    International Nuclear Information System (INIS)

    Kang, Deogji; Kim, Yunho

    2016-01-01

    Design certification applications (DCAs) submitted pursuant to 10 CFR Part 52 contain two tiers of information, Tier 1 and Tier 2. Tier 1 contains information that is to be certified through rulemaking, and includes the inspections, tests, analyses, and acceptance criteria (ITAAC). Tier 2 contains more detailed information and is the source for information included in Tier1. DC applicants have developed the ITAAC with their own format and contents. This has caused the ineffectiveness of the review process by Nuclear Regulatory Commission (NRC) at the design certification stage. Standardizing the format and content of Tier 1 and ITAAC will achieve greater efficiency and effectiveness for Tier 1 and ITAAC development and NRC review, and for ITAAC implementation and verification. NRC provided the proposed standardized ITAAC for APR1400, and KHNP is considering the application of the proposed ITAAC. The strategy for application of the NRC proposed standardized ITAAC to the APR1400 design certification is now under developing, and a meeting with NRC to review the NRC proposed standardized ITAAC is expected to be held in the near future. In this review process, establishment of industry position on the NRC proposed standardized ITAAC is very important. The support from NEI and US industry is expected to be gained

  18. L’athéisme au prisme des psaumes : étude comparée de quatre sermons réformés sur le psaume XIV au XVIIe siècle Atheism in the prism of psalms : comparative study on Psalm XIV in the 17th century

    Directory of Open Access Journals (Sweden)

    Inès Kirschleger

    2009-04-01

    Full Text Available L’article propose une étude comparée de quatre sermons protestants sur l’athéisme prenant appui sur ce verset du psaume XIV, « L’insensé a dit en son cœur : il n’y a point de Dieu ». Bien qu’appartenant à des générations différentes, les auteurs de ces sermons, Amyraut, Gaches, Morus et Superville, font le choix d’un traitement similaire du thème de l’athéisme ; de fait, le verset d’appui du sermon, qui n’a rien d’original en la matière, montre bien que nous sommes devant un sujet d’école avec ses passages obligés, et sans prise réelle sur l’actualité politique et théologique du siècle. Il n’est donc pas étonnant de retrouver globalement les mêmes types d’arguments dans chacun de ces sermons. En revanche, au-delà des particularités d’écriture propres à chacun des auteurs, on mesure l’incroyable modernité de la prédication d’Amyraut, sa richesse et sa densité, à travers deux éléments de démonstration dont la postérité fera si grand cas après Pascal et Voltaire : l’idée d’un pari sur l’existence de Dieu et la conception du Dieu-horloger.This article presents a comparative study of four sermons against atheism written by seventeenth-century Protestant ministers on Psalm 14.1: “The fool hath said in his heart, There is no God”. Though belonging to different generations, the authors, Amyraut, Gaches, Morus and Superville, deal with the refutation of atheism in the same way: the choice of Psalm 14.1 to preach against atheism is by no means original, the arguments proving the existence of God are repeated from one text to another and the sermons do not broach any of the century’s political and theological issues. It is noteworthy, however, that Amyraut’s sermon introduces two arguments which were to have an important posterity after Pascal and Voltaire: the idea that one should wager that God exists and the conception of God as a clockmaker.

  19. Developpement d'une methode de Monte Carlo dependante du temps et application au reacteur de type CANDU-6

    Science.gov (United States)

    Mahjoub, Mehdi

    La resolution de l'equation de Boltzmann demeure une etape importante dans la prediction du comportement d'un reacteur nucleaire. Malheureusement, la resolution de cette equation presente toujours un defi pour une geometrie complexe (reacteur) tout comme pour une geometrie simple (cellule). Ainsi, pour predire le comportement d'un reacteur nucleaire,un schema de calcul a deux etapes est necessaire. La premiere etape consiste a obtenir les parametres nucleaires d'une cellule du reacteur apres une etape d'homogeneisation et condensation. La deuxieme etape consiste en un calcul de diffusion pour tout le reacteur en utilisant les resultats de la premiere etape tout en simplifiant la geometrie du reacteur a un ensemble de cellules homogenes le tout entoure de reflecteur. Lors des transitoires (accident), ces deux etapes sont insuffisantes pour pouvoir predire le comportement du reacteur. Comme la resolution de l'equation de Boltzmann dans sa forme dependante du temps presente toujours un defi de taille pour tous types de geometries,un autre schema de calcul est necessaire. Afin de contourner cette difficulte, l'hypothese adiabatique est utilisee. Elle se concretise en un schema de calcul a quatre etapes. La premiere et deuxieme etapes demeurent les memes pour des conditions nominales du reacteur. La troisieme etape se resume a obtenir les nouvelles proprietes nucleaires de la cellule a la suite de la perturbation pour les utiliser, au niveau de la quatrieme etape, dans un nouveau calcul de reacteur et obtenir l'effet de la perturbation sur le reacteur. Ce projet vise a verifier cette hypothese. Ainsi, un nouveau schema de calcul a ete defini. La premiere etape de ce projet a ete de creer un nouveau logiciel capable de resoudre l'equation de Boltzmann dependante du temps par la methode stochastique Monte Carlo dans le but d'obtenir des sections efficaces qui evoluent dans le temps. Ce code a ete utilise pour simuler un accident LOCA dans un reacteur nucleaire de type

  20. Calculation of reactivity by digital processing; Calcul de la reactivite par traitement numerique

    Energy Technology Data Exchange (ETDEWEB)

    Hedde, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-12-01

    With a view to exploring the new possibilities offered by digital techniques, a description is given of the optimum theoretical conditions of a computation of the realtime reactivity using counting samples (obtained from a nuclear reactor). The degree to which these optimum conditions can be attained depends on the complexity of the processing which can be accepted. A compromise thus has to be made between the accuracy required and the simplicity of the equipment carrying out the processing. An example is given, using a relatively simple structure, which gives an idea of the accuracy of the results obtained over a wide range of reactor power. (author) [French] Dans le but d'explorer les possibilites nouvelles des techniques numeriques, on decrit les conditions theoriques optimales d'un calcul de la reactivite en temps reel a partir d'echantillons de comptage (en provenance d'un reacteur nucleaire). Ces conditions optimales peuvent etre approchees d'autant mieux que l'on accepte un traitement plus complexe. Un compromis est donc a faire entre la precision desiree et la simplicite du materiel assurant le traitement. Un exemple adoptant une structure de complexite reduite permet de juger de la precision des resultats obtenus sur une importante plage d'evolution de la puissance. (auteur)

  1. Calculation of reactivity by digital processing; Calcul de la reactivite par traitement numerique

    Energy Technology Data Exchange (ETDEWEB)

    Hedde, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-12-01

    With a view to exploring the new possibilities offered by digital techniques, a description is given of the optimum theoretical conditions of a computation of the realtime reactivity using counting samples (obtained from a nuclear reactor). The degree to which these optimum conditions can be attained depends on the complexity of the processing which can be accepted. A compromise thus has to be made between the accuracy required and the simplicity of the equipment carrying out the processing. An example is given, using a relatively simple structure, which gives an idea of the accuracy of the results obtained over a wide range of reactor power. (author) [French] Dans le but d'explorer les possibilites nouvelles des techniques numeriques, on decrit les conditions theoriques optimales d'un calcul de la reactivite en temps reel a partir d'echantillons de comptage (en provenance d'un reacteur nucleaire). Ces conditions optimales peuvent etre approchees d'autant mieux que l'on accepte un traitement plus complexe. Un compromis est donc a faire entre la precision desiree et la simplicite du materiel assurant le traitement. Un exemple adoptant une structure de complexite reduite permet de juger de la precision des resultats obtenus sur une importante plage d'evolution de la puissance. (auteur)

  2. Implementasi Automatic Packet Reporting System (APRS) Untuk Paket Data Pemantauan dan PengukuranUntuk Paket Data Pemantauan dan Pengukuran

    OpenAIRE

    Arief Goeritno

    2016-01-01

    Telah dilakukan implementasi Automatic Packet Reporting System (APRS) untuk paket data pemantauan dan pengukuran melalui tujuan penelitian, berupa: a) penyetelan program aplikasi pada jaringan APRS dan b) pengukuran terhadap penerimaan data berdasarkan kinerja sensor-sensor. Penyetelan program aplikasi APRS merupakan konfigurasi perangkat lunak untuk APRS yang akan digunakan pada stasiun penerimaan data APRS dengan program aplikasi yang biasa digunakan, yaitu hyperterminal dan UI-View 32. Pen...

  3. La prévention et le traitement des infections bactériennes chez les enfants aspléniques ou hypospléniques

    Science.gov (United States)

    1999-01-01

    L’asplénie, qu’elle soit fonctionnelle ou anatomique, s’associe à un accroissement du risque d’infection potentiellement fatale ou constituant un danger de septicémie postsplénectomie (SPS). En raison du risque accru de bactériémie par des bactéries encapsulées chez les enfants aspléniques, la vaccination visant à prévenir une infection au Streptococcus pneumoniae, à l’Haemophilus influenzae de type b (Hib) et au Neiserria meningitidis est recommandée. Malgré la prévalence croissante de S pneumoniae pénicillinorésistant, on recommande aussi l’usage de pénicilline prophylactique chez les enfants aspléniques de moins de cinq ans, et pendant au moins un an après une splénectomie. La poursuite de la prophylaxie antibiotique après cette période dépend de la situation clinique de chaque enfant et de la prévalence de S pneumoniae pénicillinorésistant au sein de la collectivité. Lorsque des enfants aspléniques font de la fièvre ou présentent des symptômes non spécifiques, ils devraient faire l’objet d’une évaluation immédiate. Si on présume la présence de septicémie bactérienne, il faut procéder à une analyse du sang et des autres liquides organiques pertinents et entreprendre sur-le-champ une antibiothérapie à large spectre par voie parentérale, laquelle doit agir également contre les souches de S pneumoniae présentes dans la collectivité. Chez les enfants aspléniques souffrant d’une septicémie foudroyante à S pneumoniae, le taux de mortalité est élevé, malgré l’utilisation rapide d’une antibiothérapie convenable, d’où l’importance des mesures préventives.

  4. Traitement de la margine brute d'huile d'olive par distillation suivi de ...

    African Journals Online (AJOL)

    SARAH

    31 juil. 2014 ... Research on optimization of the distillate and residue are in progress. Keywords: olive oil ... des composés phénoliques de ce distillat avant et après sa ..... Ranalli A. (1991a) the effluent from olive mills: Proposals for re-use ...

  5. Mise au point

    African Journals Online (AJOL)

    31 mai 2013 ... traités au service de chirurgie maxillo-faciale et chirurgie plastique de l'hôpital ... qui est la fracture simple isolée du corps, on a inclut ce type de fracture ... sion latérale au niveau de la queue du sourcil. La voie vestibulaire ...

  6. Au pair trajectories

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    pair-sending families in the Philippines, this dissertation examines the long-term trajectories of these young Filipinas. It shows how the au pairs’ local and transnational family relations develop over time and greatly influence their life trajectories. A focal point of the study is how au pairs...... that Filipina au pairs see their stay abroad as an avenue of personal development and social recognition, I examine how the au pairs re-position themselves within their families at home through migration, and how they navigate between the often conflicting expectations of participation in the sociality......Since 2000, thousands of young Filipino migrants have come to Denmark as au pairs. Officially, they are there to “broaden their cultural horizons” by living temporarily with a Danish host family, but they also conduct domestic labor in exchange for food and money, which allows them to send...

  7. Economic Aspects of Radiation Treatment; Considerations Economiques sur le Traitement par Irradiation; Ehkonomicheskie aspekty obrabotki produktov metodom oblucheniya; Consideraciones Economicas Sobre el Tratamiento por Irradiacion

    Energy Technology Data Exchange (ETDEWEB)

    Leveque, P. [Centre d' Etudes Nucleaires de Saclay (France)

    1966-11-15

    In May 1963, at the Conference held by the International Atomic Energy Agency on the Industrial Uses of Large Radiation Sources, there was considerable discussion of costs. This general exchange of views led to a number of assessments of the cost of treatment by radioactive sources and machines. After three years it seems appropriate to review the basic hypotheses, and in particular to take account of the drop in price: of radioisotopes, especially {sup 137}Cs. This affects the cost both of the installed kW and of the KWh of energy produced. In the light of the experience gained in the past: three years it is possible to define the efficiencies and the load factors observed in plants at present in operation. It is true that in most cases these are treating medical equipment and supplies, but the problems are comparable. (author) [French] En mai 1963, lors de la Conference organisee par l'AIEA sur l'emploi des sources de rayonnements intenses dans l'industrie, un large debat s'etait engage sur les prix de revient. De cette confrontation generale, on a pu tirer quelques evaluations du cout de traitement par sources radioactives et machines. Il est bon, trois ans apres, de revoir les hypotheses de base et surtout de tenir compte de l'abaissement du prix des radioelements et tout specialement du {sup 137}Cs. Ceci influe a la fois sur le prix du kW installe et du kWh d'energie produit. A la lumiere de l'experience acquise pendant ces trois dernieres annees, il est possible de preciser les rendements et facteurs de charge observes dans des installations actuellement en fonctionnement. Il s'agit il est vrai, dans la majorite des cas, de traitements d'accessoires medicaux, mais les problemes sont comparables. (author) [Spanish] En la Conferencia sobre las aplicaciones industriales de las fuentes de radiacion de elevada intensidad, celebrada.en mayo de 1963 bajo los auspicios del OIEA, se inicio un amplio debate sobre los precios de costo. De esta confrontacion general se

  8. Analysis of Turbine Load Rejection for APR1400 using SPACE

    International Nuclear Information System (INIS)

    Kim, Sang Jin; Park, Chan Eok; Choi, Jong Ho; Lee, Gyu Cheon

    2016-01-01

    Turbine Load Rejection event is one of the Performance Related Design Basis Event (PRDBE) that can be stabilized using plant control systems without any safety system actuation. The initiation of the event is turbine load rejection from 100% to 5% in 0.019 seconds. The NSSS control systems of APR1400 is composed of the Power Control System (PCS) and the Process-Component Control System (P-CCS). The PCS includes Reactor Regulating System (RRS), Reactor Power Cutback System (RPCS) and Digital Rod Control System (DRCS). The P-CCS includes the Pressurizer Pressure Control System (PPCS), the Pressurizer Level Control System (PLCS), the Feedwater Control System (FWCS) and the Steam Bypass Control System (SBCS). Turbine load rejection results in the increase of secondary pressure due to sudden blocking of steam flow to turbine. Then the Reactor Coolant System (RCS) cooling through steam generators is decreased rapidly and the RCS temperature will be increased. Turbine load rejection is a typical event to test NSSS control systems since it requires the automatic response of all major NSSS control systems. It is shown that the NSSS control systems of APR1400 have the capability to stabilize the plant without any safety system actuation for turbine load rejection event. This analysis results show that SPACE code has the capability to analyze the turbine load rejection event. However, further validation is necessary for other PRDBEs such as Two Main Feedwater Pumps Trip, Turbine Load Step Change and Turbine Load Ramp Down (5%/min) to verify the capability of SPACE for the full range of performance analyses

  9. Analysis of Turbine Load Rejection for APR1400 using SPACE

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Jin; Park, Chan Eok; Choi, Jong Ho; Lee, Gyu Cheon [KEPCO Engineering and Construction Co. Ltd., Deajeon (Korea, Republic of)

    2016-10-15

    Turbine Load Rejection event is one of the Performance Related Design Basis Event (PRDBE) that can be stabilized using plant control systems without any safety system actuation. The initiation of the event is turbine load rejection from 100% to 5% in 0.019 seconds. The NSSS control systems of APR1400 is composed of the Power Control System (PCS) and the Process-Component Control System (P-CCS). The PCS includes Reactor Regulating System (RRS), Reactor Power Cutback System (RPCS) and Digital Rod Control System (DRCS). The P-CCS includes the Pressurizer Pressure Control System (PPCS), the Pressurizer Level Control System (PLCS), the Feedwater Control System (FWCS) and the Steam Bypass Control System (SBCS). Turbine load rejection results in the increase of secondary pressure due to sudden blocking of steam flow to turbine. Then the Reactor Coolant System (RCS) cooling through steam generators is decreased rapidly and the RCS temperature will be increased. Turbine load rejection is a typical event to test NSSS control systems since it requires the automatic response of all major NSSS control systems. It is shown that the NSSS control systems of APR1400 have the capability to stabilize the plant without any safety system actuation for turbine load rejection event. This analysis results show that SPACE code has the capability to analyze the turbine load rejection event. However, further validation is necessary for other PRDBEs such as Two Main Feedwater Pumps Trip, Turbine Load Step Change and Turbine Load Ramp Down (5%/min) to verify the capability of SPACE for the full range of performance analyses.

  10. Évolution des conditions d’initiation du traitement antirétroviral des patients infectés par le VIH en Afrique de l’Ouest

    Science.gov (United States)

    Bashi, J.; Balestre, E.; Messou, E.; Maiga, M.; Coffie, P.A.; Zannou, D.M.; Ba-Gomis, O.; Traore, H.A.; Eholie, S.; Minga, A.; Sow, P.S.; Bissagnene, E.; Dabis, F.; Ekouevi, D.K.

    2013-01-01

    Résumé Objectif Étudier entre 1996 et 2006, l’évolution des schémas thérapeutiques et du profil clinique et immunologique des patients infectés par le VIH au début du traitement antirétroviral (TARV) en Afrique de l’Ouest. Cadre et méthode Les données issues de 12 centres cliniques adultes (IeDEA West Africa réseau collaboratif de prise en charge de l’infection à VIH) de cinq pays (Bénin, Cote d’Ivoire, Sénégal, Gambie, Mali) ont été mises en commun et analysées. Les patients âgés de 16 ans et plus dont le sexe, la date de naissance et la date d’initiation du TARV étaient connus ont été inclus dans cette étude. Résultats Quatorze mille quatre-cent-quatre-vingt-seize patients avaient débuté un TARV entre 1996–2006 avec 55 % des patients l’ayant débuté entre 2005–2006. La proportion de femmes était de 46 % en 1996–2000 et de 63 % en 2005–2006. L’âge médian à la mise sous traitement était constant: 35 ans chez les femmes et 40 ans chez les hommes. La proportion de patients qui ont débuté le TARV avec un taux de CD4 inférieur à 200 cellules/µl était de 54 % en 1996–2000 et de 64 % en 2005–2006. Les combinaisons thérapeutiques les plus prescrites étaient: AZT/3TC (ou d4T/DDI)/IDV (27 %) en 1996–2000; d4T (ou AZT)/3TC/EFV (59 %) en 2003–2004; et d4T/3TC/NVP (49 %) en 2005–2006. Les traitements de première ligne recommandés par l’OMS étaient débutés dans 83 % de cas en 2005–2006. Conclusion De nouvelles approches pour débuter un TARV plus précocement doivent être développées pour améliorer la survie des patients sous TARV. PMID:20045273

  11. Study of Combined Treatment for Damp-Harvested Maize: Gamma Irradiation and Drying by Controlled Ventilation; Etude d'un Traitement Combine pour le Conditionnement du Mais Recolte Humide: Irradiation Gamma et Sechage par Ventilation Controlee; Izuchenie kombinirovannoj obrabotki kukuruzy molochno-voskovoj spelosti; Estudio de un Tratamiento Combinado para el Acondicionamiento del Maiz Recolectado Humedo: Irradiacion Gamma y Secado por Ventilacion Controlada

    Energy Technology Data Exchange (ETDEWEB)

    Saint-Lebe, L.; Pelegrin, P. [Centre d' Etudes Nucleaires de Cadarache (France); Guilbot, A. [Institut National de la Recherche Agronomique, Massy (France)

    1966-11-15

    optimales de la radiopasteurisation du maies. En possession de ces donnees les auteurs abordent a l'echelle du laboratoire le probleme du traitement combine irradiation-ventilation, dans des conditions experimentales faciles a transposer sur le plan industriel. Ils etudient les modifications microbiologiques et biochimiques qui se produisent dans la fraction des grains humides atteinte en dernier par le flux d'air sechant, ce qui correspond au cas le plus defavorable. D'un point de vue quantitatif, il apparait dans cette zone que l'effet depressif de l'irradiation sur la mycoflore persiste meme apres 26 jours; cet effet est encore plus important sur les bacteries. D'un point de vue qualitatif, on observe la regeneration prioritaire d'une mycoflore precisement sensible au flux d'air sec qui doit l'atteindre. Des applications industrielles sont en vue; mais, avant de passer au stade pilote, phase indispensable a retablissement d'un prix de revient, il est necessaire de mener plus avant des investigations biochimiques. De meme, le point de vue de la sante publique ne devra pas etre neglige pour le cas ou le procede trouverait une application dans le domaine de l'alimentation animale ou humaine. (author) [Spanish] La asociacion de los efectos de la irradiacion gamma con cobalto-60 y del secado lento por ventilacion en frio (10 a 25 Degree-Sign C) en las celdas de almacenamiento se practica con el fin de hallar un sustitutivo a la solucion clasica de secado rapido con aire calentado a alta temperatura, pues el primer tratamiento es mas apropiado para mantener la integridad del grano'y ejerce al mismo tiempo un efecto purificador desde el punto de vista microbiologico. Este problema afecta en Francia a un millon de toneladas de maiz humedo (1964) y cobrara cada vez mas importancia tanto en Europa como en los paises de la zona tropical. Los autores estudian primero la influencia directa de las radiaciones gamma sobre el rendimiento y las caracteristicas tecnicas del almidon. Este

  12. Développement d’un programme multidisciplinaire de diagnostic de l’adrénoleucodystrophie liée à l’X au Maroc: résultats de la mise en œuvre du programme de diagnostic clinique et biologique

    Science.gov (United States)

    Benjelloun, Fatima-Zohra Madani; Chabraoui, Layachi; Kriouile, Yamna

    2017-01-01

    Introduction L'adrénoleucodystrophie liée à l'X (X-ALD) est une maladie neurodégénérative sévère, due à des mutations du gène ABCD1. Elle se manifeste par une atteinte du système nerveux central et périphérique, une insuffisance surrénalienne et une atteinte des testicules chez le garçon. Son diagnostic repose sur le dosage des Acides Gras à Très Longue Chaine. Le diagnostic précoce est d'une grande importance puisque il définit l'accessibilité aux traitements selon le stage de la maladie. Méthodes Nous avons mis en place un programme de diagnostic de l'X-ALD au Maroc au niveau de l'Hôpital d'enfants et du Laboratoire centrale des maladies héréditaires et du métabolisme de Rabat. Le programme s'articule sur trois axes à savoir : le recrutement des patients, le diagnostic et la sensibilisation. Le diagnostic s'effectue selon trois protocoles : un protocole pour les cas symptomatiques, un deuxième pour les cas asymptomatiques et un troisième pour les femmes hétérozygotes. Résultats Durant trois ans après la mise en place de notre programme de diagnostic de l'Adrénoleucodystrophie liée à l'X, nous avons diagnostiqué la maladie chez sept familles, avec neuf garçons et trois femmes hétérozygotes. Tous les enfants diagnostiqués présentaient la forme cérébrale démyélinisante. Toutes les femmes hétérozygotes étaient asymptomatiques. Une prise en charge thérapeutique a été mise place selon la symptomatologie de chaque cas. Conclusion l'X-ALD est une maladie rare. Notre programme de diagnostique a permis de diagnostiquer un nombre important de cas, ce qui montre son importance. Les compagnes de sensibilisation auprès des professionnels permettront de mieux comprendre la maladie et mieux la diagnostiquer et ainsi donner accès à un nombre plus élevé de patients. PMID:29599883

  13. Une méthode pour estimer l’interception du rayonnement par un couvert bas : application au colza avant montaison

    Directory of Open Access Journals (Sweden)

    Denoroy Pascal

    2002-01-01

    introduire dans l’équation 2 un paramètre représentant le taux de couverture du sol. Si l’estimation par mesure directe de epsiloni et donc l’estimation de k sont assez simples, au moins dans le principe pour un couvert développé en hauteur (colza après montaison [3], une telle mesure devient beaucoup plus complexe dans le cas d’un couvert discontinu et bas. Dans ce milieu hétérogène (et souvent dans des conditions hivernales sévères, une distribution représentative des capteurs de rayonnement est difficile, les risques de perturbation de la mesure (salissure des capteurs, déréglages sont élevés. Plusieurs études ont déjà traité de epsiloni et k dans le cas du colza [3-7]. Elles sont fondées sur des mesures d’interception du rayonnement et concernent des couverts fermés, après montaison. Une autre approche consiste à effectuer un calcul précis de PARi avec des modèles détaillés utilisant une description complète des paramètres (géométriques et radiatifs du feuillage, et du rayonnement incident [8]. Mais les données nécessaires sont alors nombreuses, complexes à obtenir et donc généralement non disponibles en expérimentation. Pour répondre aux besoins de calcul de l’interception du rayonnement dans les phases d’installation du colza, cet article présente une méthode permettant de calculer epsiloni en tenant compte des principales caractéristiques de la morphologie du couvert et du régime radiatif auquel ce dernier est soumis. Les données nécessaires sont limitées : l’indice foliaire, les taux de couverture du sol (deux définitions, la latitude du lieu considéré, la date et le rayonnement incident quotidien. Ce calcul permet une estimation du coefficient moyen d’extinction k (équation 2. On verra que k peut être corrélé à l’IF, la période de l’année et la latitude du lieu, ce qui permet de proposer une estimation simple de k et donc un calcul simplifié de epsiloni, adapté au cas des faibles IF

  14. L'endométriose pariétale cicatricielle après césarienne: une entité rare

    Science.gov (United States)

    El Fahssi, Mohammed; Lomdo, Massama; Bounaim, Ahmed; Ali, Abdelmounaim Ait; Sair, Khalid

    2016-01-01

    L'endométriose de la paroi est une entité clinique rare, dont la physiopathologie demeure imprécise. Elle survient le plus souvent après une intervention chirurgicale gynécologique ou obstétricale. Nous rapportons le cas d'une patiente présentant une douleur cyclique, au niveau de la cicatrice de césarienne, Avec à l'examen clinique une masse de 5cm localisée au niveau de la fosse iliaque droite. la tomodensitométrie montre une masse de densité tissulaire de 45mm de grand axe. D'où la décision d'excision large de la lésion dont l’étude anatomopathologique confirme le diagnostic d'endométriose pariétale. Les suites postopératoires étaient simples avec un recul de 20 mois sans récidive de la masse ni de la douleur. A travers notre cas, nous insisterons sur les caractéristiques de cette pathologie, ce qui permettra au praticien de comprendre l'intérêt du diagnostic et de la prise en charge précoce de cette affection ainsi que la possibilité de sa prévention au cours de chaque chirurgie gynécologique ou obstétricale. PMID:27642418

  15. Les politiques d’employabilité en Belgique : traitement clinique des chômeurs et traitement statistique du chômage The Politics of Employability in Belgium : Clinical Treatment of the Unemployed and Statistical Treatment of Unemployment

    Directory of Open Access Journals (Sweden)

    Jean-François Orianne

    2011-03-01

    Full Text Available Cet article interroge la mise en œuvre et le suivi des politiques européennes d’employabilité en Belgique à la lumière de la sociologie de Norbert Elias, en reliant les dimensions sociogénétiques et psychogénétiques de la construction européenne. Le traitement clinique des chômeurs, qui repose principalement sur la construction professionnelle de troubles de l’employabilité, contribue à l’intériorisation de normes à grande échelle, à la socialisation de la population active au marché du travail et renforce la concurrence entre les actifs occupés et les actifs inoccupés (principale condition de stabilité de la monnaie unique. Parallèlement, le traitement statistique du chômage, qui consiste en un jeu rationnel entre États (et Régions de maximisation des indicateurs de résultats, renforce la compétition territoriale pour attirer les investisseurs et encadre, légitime, dynamise ce mouvement incertain d’harmonisation ou d’intégration des systèmes de protection sociale en Europe.This article investigates the setting up and follow-up of European employment politics in Belgium, in light of the sociology of Norbert Elias, in blending the socio-genetic and psycho-genetic dimensions of European construction. The clinical treatment of the unemployed, principally based on the professional construction of employability troubles, contributes to the internalization of standards on a vast scale, to the socialization of the active population on the job market and reinforcing competition between occupied actives and unoccupied actives (a principal condition for the stability of a unique currency. At the same time, the statistical treatment of unemployment, consisting in a deliberate game between States (and Regions of maximization of result indicators, reinforces a territorial competition aimed at attracting investors as well as organizing, legitimating and dynamizing the unsteady movement toward harmonization or

  16. Traitement statistique des distorsions non-linéaires pour la restauration des enregistrements sonores.

    OpenAIRE

    Picard , Guillaume

    2006-01-01

    L'objet de la thèse est l'étude, la modélisation et le traitement des distorsions non linéaires sonores, pour lesquelles les techniques actuelles s'avèrent impuissantes. L'approche retenue consiste à représenter, globalement, à la fois le signal audio à restaurer et le processus de distorsion, dans le cadre d'un modèle statistique. Cette approche présente un bon compromis entre une souhaitable généricité -possibilité de traiter à l'aide d'une méthode globale plusieurs types de distorsions- et...

  17. Le traitement de l’idéologie dans la sociologie de Luc Boltanski

    Directory of Open Access Journals (Sweden)

    David Vrydaghs

    2006-10-01

    Full Text Available IntroductionLe concept d’idéologie apparaît dans la sociologie de Luc Boltanski à partir du Nouvel Esprit du capitalisme, publié en 1999. L’auteur y revient dans La Condition fœtale, paru en 2004. On aurait donc pu se contenter de ces ouvrages pour examiner le traitement réservé à l’idéologie dans la sociologie de Luc Boltanski. On préférera pourtant revenir aux travaux antérieurs du sociologue, et ce pour deux raisons.D’abord parce que le concept d’idéologie tel qu’il est employé dans Le Nou...

  18. Pseudomonas syringae evades host immunity by degrading flagellin monomers with alkaline protease AprA

    NARCIS (Netherlands)

    Pel, Michiel J C; van Dijken, Anja J H; Bardoel, Bart W; Seidl, Michael F; van der Ent, Sjoerd; van Strijp, Jos A G; Pieterse, Corné M J

    Bacterial flagellin molecules are strong inducers of innate immune responses in both mammals and plants. The opportunistic pathogen Pseudomonas aeruginosa secretes an alkaline protease called AprA that degrades flagellin monomers. Here, we show that AprA is widespread among a wide variety of

  19. Pseudomonas syringae evades host Immunity by degrading flagellin monomers with alkaline protease AprA

    NARCIS (Netherlands)

    Pel, M.J.C.; Van Dijken, A.J.H.; Bardoel, B.W.; Seidl, M.F; Van der Ent, S.; Van Strijp, J.A.G.

    2014-01-01

    Bacterial flagellin molecules are strong inducers of innate immune responses in both mammals and plants. The opportunistic pathogen Pseudomonas aeruginosa secretes an alkaline protease called AprA that degrades flagellin monomers. Here, we show that AprA is widespread among a wide variety of

  20. 48 CFR 1552.235-76 - Treatment of Confidential Business Information (APR 1996).

    Science.gov (United States)

    2010-10-01

    ... Business Information (APR 1996). 1552.235-76 Section 1552.235-76 Federal Acquisition Regulations System... Provisions and Clauses 1552.235-76 Treatment of Confidential Business Information (APR 1996). As prescribed in 1535.007-70(c), insert the following clause: Treatment of Confidential Business Information (TSCA...

  1. Treatment and Processing of Radioactive Wastes; Traitement des Dechets Radioactifs; 041e 0411 0420 0414 ; Tratamiento de Desechos Radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Rodger, Walton A. [Chemical Engineering Division, Argonne National Laboratory, Lemont, IL (United States)

    1960-07-01

    Various methods which have been considered for processing and treating radioactive wastes of both low and high level are discussed. Low-Level Wastes-Gases are diluted and discharged to the atmosphere through stacks or are filtered through highly retentive filters. Typical installations are described. Incineration of combustible wastes has been examined and descriptions and operating data are given. Baling is often a useful adjunct to a solids collection system. A variety of processes for liquid wastes have been studied. Typical systems are described and operating data given. High-Level Wastes-Gases are sometimes vented directly through stacks but more often some treatment is required. The treatment takes the form of chemical scrubbing, removal of iodine on silver reactors, rare-gas removal and filtration. Highly contaminated solids may require decontamination in place before they can be removed. High-level liquid wastes represent the largest single waste-disposal problem facing the industry at the present time. This problem includes reduction in the volume of the waste originally produced by process changes or changing the process; concentration of the produced waste or reduction to solids by one of several methods including concentration, use of Portland cement, adsorption on clays or other natural materials, and calcination. The technical and economic problems associated with temporary storage are considered. It may become necessary to do waste processing at only a few carefully selected sites. Estimates are made of the amounts that might be involved in transport and of the equipment needed. The attendant hazards and costs are considered. (author) [French] L'auteur etudie les diverses methodes qui ont ete envisagees pour le traitement des dechets de faible et de haute radioactivite. Dechets, de faible radioactivite - Les gaz sont, soit dilues et evacues dans l'atmosphere par de hautes cheminees, soit filtres au moyen d'appareils a grande puissance de filtrage. L

  2. A Probability Analysis of the Generating Cost for EU-APR1400 Single Unit

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Gak Hyeon; Kim, Sung Hwan [KHNP CRI, Seoul (Korea, Republic of)

    2014-10-15

    The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, reducing CO{sub 2} emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the EU-APR100 development is to ensure export competitiveness in the European countries. To this end, EU-APR1400 have been developed based one te APR1400 (Advanced Power Reactor, GEN Type) The EU-APR1400 adds many advanced design features to its predecessor, as outlined below in Table 1. In this simulation, the results of the generating cost of the EU-APR1400 single unit were determined using the probability cost analysis technique, the generating cost range was shown to be 56.16 ∼ 70.92 won/kWh.

  3. A Probability Analysis of the Generating Cost for EU-APR1400 Single Unit

    International Nuclear Information System (INIS)

    Ha, Gak Hyeon; Kim, Sung Hwan

    2014-01-01

    The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, reducing CO 2 emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the EU-APR100 development is to ensure export competitiveness in the European countries. To this end, EU-APR1400 have been developed based one te APR1400 (Advanced Power Reactor, GEN Type) The EU-APR1400 adds many advanced design features to its predecessor, as outlined below in Table 1. In this simulation, the results of the generating cost of the EU-APR1400 single unit were determined using the probability cost analysis technique, the generating cost range was shown to be 56.16 ∼ 70.92 won/kWh.

  4. État des connaissances sur le traitement thermique des produits lourds State of the Art of the Thermal Treatment of Heavy Products

    Directory of Open Access Journals (Sweden)

    Blouri B.

    2006-11-01

    Full Text Available Après rappel du traitement thermique des hydrocarbures comme un moyen de viscoréduction des charges lourdes, craquage en oléfines gazeuses, ou pyrolyse totale en gaz de synthèse, le mécanisme réactionnel de vapocraquage des produits lourds constitue la première partie de l'article. Le craquage des huiles lourdes s'effectue selon un mécanisme radicalaire, tandis que les dépôts de carbone sont formés par des réactions de cycloadditions et polycondensations à des températures moyennes et par l'intermédiaire des radicaux à haute température. L'étude expérimentale du craquage thermique du n-tétracosane, du méthyl-6 eicosane et du dodécylbenzène constitue la deuxième partie de l'article et elle met en évidence, grâce à un mécanisme réactionnel du type moléculaire, la possibilité de craquage contrôlé d'une isoparaffine ou d'un hydrocarbure aromatique lourd en hydrocarbure liquide plus léger. After reviewing the thermal treatment of hydrocarbons as a way of visbreaking heavy feedstock, cracking them into gaseous olefins, or totally pyrolyzing them into synthetic gas, the first part of this article describes the reac-tion mechanism of the steam cracking of heavy products. Heavy oils are cracked by a radical mechanism, while carbon deposits are formed by cycloaddition and polycondensation reactions at mean temperatures and by the intermediary of radicals at high temperature. An experimental investigation of the thermal cracking of n-tetracosane, 6-methyleicosane and dodecylbenzene makes up the second part of the article. A reaction mechanism of the molecular type is used to describe the possibility of the controlled cracking of an isoparaffin or of a heavy aromatic hydrocarbon into a lighter liquid hydrocarbon.

  5. The trauma registry compared to All Patient Refined Diagnosis Groups (APR-DRG).

    Science.gov (United States)

    Hackworth, Jodi; Askegard-Giesmann, Johanna; Rouse, Thomas; Benneyworth, Brian

    2017-05-01

    Literature has shown there are significant differences between administrative databases and clinical registry data. Our objective was to compare the identification of trauma patients using All Patient Refined Diagnosis Related Groups (APR-DRG) as compared to the Trauma Registry and estimate the effects of those discrepancies on utilization. Admitted pediatric patients from 1/2012-12/2013 were abstracted from the trauma registry. The patients were linked to corresponding administrative data using the Pediatric Health Information System database at a single children's hospital. APR-DRGs referencing trauma were used to identify trauma patients. We compared variables related to utilization and diagnosis to determine the level of agreement between the two datasets. There were 1942 trauma registry patients and 980 administrative records identified with trauma-specific APR-DRG during the study period. Forty-two percent (816/1942) of registry records had an associated trauma-specific APR-DRG; 69% of registry patients requiring ICU care had trauma APR-DRGs; 73% of registry patients with head injuries had trauma APR-DRGs. Only 21% of registry patients requiring surgical management had associated trauma APR-DRGs, and 12.5% of simple fractures had associated trauma APR-DRGs. APR-DRGs appeared to only capture a fraction of the entire trauma population and it tends to be the more severely ill patients. As a result, the administrative data was not able to accurately answer hospital or operating room utilization as well as specific information on diagnosis categories regarding trauma patients. APR-DRG administrative data should not be used as the only data source for evaluating the needs of a trauma program. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Développement de la mémoire de travail et traitement des phrases complexes : Quelle relation ?

    Directory of Open Access Journals (Sweden)

    Frauenfelder Ulrich

    2012-07-01

    Full Text Available La complexité syntaxique d’une phrase en langage oral peut se caractériser par le nombre et la nature des opérations syntaxiques nécessaires à son élaboration, et notamment par la profondeur de son enchâssement. Cette complexité influence l’âge d’acquisition des différentes structures syntaxiques, les énoncés les plus complexes étant maîtrisés plus tardivement par l’enfant. Certains auteurs attribuent cette acquisition de la syntaxe complexe à des contraintes développementales externes au système linguistique lui-même et notamment à des limitations dans les capacités de mémoire de travail (Jakubowicz, 2007. Ainsi, le traitement d’une phrase complexe engendrerait un coût cognitif important et constituerait une surcharge pour des capacités de mémoire de travail davantage limitées chez le jeune enfant. La maturation normale de ce système mnémonique permettrait ensuite à l’enfant de comprendre et de produire des énoncés de plus en plus complexes. La présente recherche a pour objectif d’éclaircir les liens entre le développement de la mémoire de travail et le traitement des phrases complexes chez l’enfant tout-venant âgé de 5 à 12 ans. Suivant le modèle de la mémoire de travail de Baddeley & Hitch (1986 et les travaux de Barrouillet & Camos (2001, 2007, nous avons appréhendé les compétences de la boucle phonologique via des épreuves d’empans simples (empan direct de chiffres, répétition de mots et de pseudo-mots et la mémoire de travail verbale via des tâches d’empans complexes (empan indirect de chiffres, counting span et running span. Les habiletés syntaxiques des enfants ont été évaluées en compréhension et en répétition d’énoncés complexes. Une analyse d’échantillons de langage spontané a enfin permis de récolter les données liées à l’utilisation de la syntaxe complexe en contexte écologique (LME, taux de subordination et taux d’enchâssement profond. Les

  7. Development of Core Simulator (CoSi) for APR1400 And Analysis of LPPT Result using APR1400-CoSi

    International Nuclear Information System (INIS)

    Moon, Sang-Rae; Kim, Yong-Bae; Lee, Eun-Ki

    2014-01-01

    According to NRC guidelines, Low Power Physics Test (LPPT) is required to be performed in low temperature/low pressure (160 .deg. C/42.2 kg/cm 2 ) as well as NOT/NOP (291.3 .deg. C/158.2 kg/cm 2 ) because Shin-Kori Unit 3 is FOAK nuclear power plant. Low Power Physics Test (LPPT) is essential to verify the nuclear design and robustness of reactor safety. LPPT consists of initial criticality, Point of Adding Heat (POAH), All Rod Out (ARO) Boron Concentration, Isothermal Temperature Coefficient (ITC), Control Rod Worth measurements and so on. KHNP-CRI has developed the Core Simulator for APR1400 (APR1400-CoSi) in order to improve the ability performing the LPPT. Especially, APR1400-CoSi has enhanced capability to calculate the full Core neutronic parameters by revising RAST-K that is three dimensional real time core kinetic program. APR1400-CoSi has been developed for education-training of Low Power Physics Test(LPPT). Particularly, APR1400-CoSi has an enhanced capability to calculate the full core neutronic parameters by revising RAST-K which is a three dimensional real time core kinetics program. Low Power Physics Test (LPPT) was performed using APR1400-CoSi and the results showed very similar values with the predicted ones. In other words, the initial core model of Shin-Kori Unit 3 in APR1400-CoSi system has been verified to be appropriate enough. Also, it was confirmed that the test range of Low Power Physics Test (LPPT) reamains effective even though the largest incremental bank reactivity is inserted in core by analyzing the power change during the rod SWAP test

  8. le traitement chirurgical des poches de rétraction tympaniques

    African Journals Online (AJOL)

    16 juin 2006 ... L'évolution naturelle de l'otite atelectasique vers la maladie cholestéatomateuse complique d'avantage la prise en charge des poches de rétraction. ... risque de cholestéatome résiduel était important. Après un recul minimum de 21 mois, le résultat anato- mique été satisfaisant dans 88%. Ailleurs ...

  9. Case report

    African Journals Online (AJOL)

    ebutamanya

    9 mai 2016 ... correspondant à 12 g de carbonate de lithium), bien amélioré cliniquement après trois séances d'hémodialyse. Cette observation .... fréquent d'observer au cours du traitement chronique un diabète insipide néphrogénique avec ... complication au cours de tentative de suicide au lithium. Notre observation ...

  10. Analysis on Containment Response Following a LBLOCA of APR1400

    International Nuclear Information System (INIS)

    Han, Kyu Hyun

    2016-01-01

    The predictions are in good agreements with the final safety analysis report, which implies the containment integrity is maintained during or after an accident like loss of coolant accident. In this study, the CONTEMPT-LT/028 was used to calculate the pressure and temperature, and in the follow-up study, CONTAIN 2.0 will be used for the pressure and temperature predictions in APR1400 reactors. Shin-Hanul Units 1 and 2 may possess different characteristics of peak pressure and temperature in containment following a large break loss-of-coolant-accident. To assess the important performance independently and to compare with prediction results presented in the final safety analysis report (FSAR) of Shin-Hanul Units 1 and 2 might be helpful to regulatory review for identifying validity of the FSAR. The end of blowdown (EOB) time during a LOCA could largely affect the peak pressure and temperature in the containment. This paper provides CONTEMPT-LT/028 prediction of the peak pressure and temperature of Shin-Hanul Units 1 and 2 following a large break loss-of-coolant-accident and compares with licensee's prediction results.

  11. Analysis on Containment Response Following a LBLOCA of APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Han, Kyu Hyun [KINS, Daejeon (Korea, Republic of)

    2016-05-15

    The predictions are in good agreements with the final safety analysis report, which implies the containment integrity is maintained during or after an accident like loss of coolant accident. In this study, the CONTEMPT-LT/028 was used to calculate the pressure and temperature, and in the follow-up study, CONTAIN 2.0 will be used for the pressure and temperature predictions in APR1400 reactors. Shin-Hanul Units 1 and 2 may possess different characteristics of peak pressure and temperature in containment following a large break loss-of-coolant-accident. To assess the important performance independently and to compare with prediction results presented in the final safety analysis report (FSAR) of Shin-Hanul Units 1 and 2 might be helpful to regulatory review for identifying validity of the FSAR. The end of blowdown (EOB) time during a LOCA could largely affect the peak pressure and temperature in the containment. This paper provides CONTEMPT-LT/028 prediction of the peak pressure and temperature of Shin-Hanul Units 1 and 2 following a large break loss-of-coolant-accident and compares with licensee's prediction results.

  12. Verification of SAMG entry condition for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Yun, Junghyun; Kim, Taewan; Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    In the wake of the Fukushima accident, severe accident management has become important more than ever. While Emergency Operating Procedures (EOPs) focuses on cooling down the core during a design basis accident, the prime objective of severe accident management guideline (SAMG) is to prevent the release of radioactive material into the environment during a severe accident. Only one fixed value of core exit temperature (CET) has been applied for several decades to different types of nuclear power plants (NPPs) in Korea. Although the different types of NPPs have different cladding materials and system designs, the identical CET, i. e., 650 .deg. C, is applied as the entry condition to the SAMG of all the NPPs (except CANDU plants), i. e., Westinghouse type, OPR1000, and APR1400. In this paper, the transition point is re-evaluated for dominant severe accident sequences; station black-out (SBO), small break loss of coolant accident (SBLOCA), and me dium break loss of coolant accident (MBLOCA). In cases of SBO and SBLOCA, the current SAMG entry condition seems proper, while it needs to be reconsidered for MBLOCA case.

  13. Aircraft Impact Assessment of APR1400 Reactor Containment Building

    International Nuclear Information System (INIS)

    Moon, Il Hwan; Kim, Do Yeon; Kim, Jae Hee; Kim, Sang Yun

    2011-01-01

    The implementation of a protection to withstand aircraft impact on safety-related structures and systems is basically based on a probabilistic evaluation for each site, if the licensing body doesn't require a deterministic approach. Existing nuclear power plants in Korea were designed based on the probabilistic approach, and the aircraft impact hazard remained less than a probability of 10 -7 . However, a man-made aircraft impact have been considered as a possible external accident for the nuclear power plant. New plant designs that are to be constructed in the U.S. after July 2009 must consider the effect of impact from a large commercial aircraft according to the requirements of 10 CFR 50.150. Especially, Reactor Containment Building (RCB) housing the safety-related equipment and fuels should be protected safely against aircraft crash without perforation and scabbing failure of external wall. APR1400 RCB is constructed as a prestressed concrete containment vessel (PCCV) which is surrounded by the auxiliary building housing additional safety-related equipment and other systems. In this study, the aircraft impact analyses for the RCB are carried out using Riera forcing function and aircraft model. Considered external wall thickness is 4 ft 6 in. for the cylindrical wall and 4 ft for the dome. Actual strengths of concrete and steel are considered as the material properties. For these analyses, the dynamic increment factor and concrete aging effect are considered in accordance with NEI 07-13(2011)

  14. Apports des ontologies à la création de bases de connaissances pour la maîtrise des conformités légales en santé et sécurité au travail

    OpenAIRE

    Vigneron , Jonathan; Rallo , Jean-Marc; Guarnieri , Franck

    2014-01-01

    La "Santé-Sécurité au Travail" (SST) est au coeur des politiques d'entreprise et la judiciarisation de la société concourt à une inflation du nombre de textes réglementaires publiés chaque année. Les préventeurs sont donc confrontés au traitement croissant de données afin de rester en conformité. Ils se forment au droit et s'entourent de compétences interne (direction juridique) ou externe (bureaux de contrôle et de conseil) et se dotent de systèmes d'information. Ces derniers sont principale...

  15. 48 CFR 1552.235-75 - Access to Toxic Substances Control Act Confidential Business Information (APR 1996).

    Science.gov (United States)

    2010-10-01

    ... Control Act Confidential Business Information (APR 1996). 1552.235-75 Section 1552.235-75 Federal... Confidential Business Information (APR 1996). As prescribed in 1535.007(b), insert the following provision: Access to Toxic Substances Control Act Confidential Business Information (APR 1996) In order to perform...

  16. Modifications anatomiques après écorçage de trois espèces au sud ...

    African Journals Online (AJOL)

    SARAH

    31 juil. 2017 ... post-bark stress leading to bark removal in the first months, the species should be harvested ... exploiting these Non Wood Forest Products that after harvesting the bark, the trees should be left free for a ..... oxidative damage.

  17. Study on Maintenance Personnel Development Plan For The Exported APR1400 Commissioning

    International Nuclear Information System (INIS)

    Cho, Sungbae; Kim, Jongdae; Jun, Hokwang; Hwang, Inok; Kang, Jaeyuel

    2012-01-01

    This paper indicates ways to develop maintenance personnel for the exported APR1400 commissioning. The exported APR1400 has not been experienced ay maintenance yet, and requirements for maintenance personnel have not been clarified yet. Based on sound maintenance experience, KEPCO Plant Service and Engineering Company (KEPCO KPS) has studied on maintenance training and career requirement to establish a development plan of the maintenance personnel for the exported nuclear power plant. By defining manpower and training requirement, and mobilization plan, we expect to secure reliability of the exported APR1400

  18. Development of LBB Piping Evaluation Diagram for APR 1000 Main Steam Line Piping

    International Nuclear Information System (INIS)

    Yang, J. S.; Jeong, I. L.; Park, C. Y.; Bai, S. Y.

    2010-01-01

    This paper presents the piping evaluation diagram (PED) to assess the applicability of Leak-Before- Break(LBB) for APR 1000 main steam line piping. LBB-PED of APR 1000 main steam line piping is independent of its piping geometry and has a function of the loads applied in piping system. Also, in order to evaluate LBB applicability during construction process with only the comparative evaluation of material properties between actually used and expected, the expected changes of material properties are considered in the LBB-PED. The LBB-PED, therefore, can be used for quick LBB evaluation of APR 1000 main steam line piping of both design and construction

  19. Fuel assembly design for APR1400 with low CBC

    Energy Technology Data Exchange (ETDEWEB)

    Hah, Chang Joo, E-mail: changhah@kings.ac.kr [Department of NPP Engineering, KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-04-29

    APR 1400 is a PWR (Pressurized Water Reactor) with rated power of 3983 MWth and 241 assemblies. Recently, demand for extremely longer cycle up to 24 months is increasing with challenge of higher critical boron concentration (CBC). In this paper, assembly design method of selecting Gd-rods is introduced to reduce CBC. The purpose of the method is to lower the critical boron concentration of the preliminary core loading pattern (PLP), and consequently to achieve more negative or less positive moderator temperature coefficient (MTC). In this method, both the ratio of the number of low-Gd rod to the number of high-Gd rod (r) and assembly average Gd wt% (w) are the decision variables. The target function is the amount of soluble boron concentration reduction, which can be converted to Δk{sub TARGET}. A set of new designed fuel assembly satisfies an objective function, min [f=∑{sub i}(Δk{sub FA}−Δk{sub i})], and enables a final loading pattern to reach a target CBC. The constraints required to determine a set of Δk are physically realizable pair, (r,w), and the sum of Δk of new designed assemblies as close to Δk{sub TARGET} as possible. New Gd-bearing assemblies selected based on valid pairs of (r,w) are replaced with existing assemblies in a PLP. This design methodology is applied to Shin-Kori Unit 3 Cycle 1 used as a reference model. CASMO-3/MASTER code is used for depletion calculation. CASMO-3/MASTER calculations with new designed assemblies produce lower CBC than the expected CBC, proving that the proposed method works successful.

  20. Nutrient changes due to processing of sorne species of Vemoflia in ...

    African Journals Online (AJOL)

    en nutriments dans les espèces de Verrzwzia amer af/y/gda/ina, V. va/i/oana var. amère) et non amer (V. co/amta et V. cu/voafla var. non amère) rencontrées au Cameroun. Les traitements utilisés sont le lavage, le lavage après blanchiment sans natron, le lavage après blanchiment avec une concentration de natron.

  1. Devenir des micropolluants prioritaires et émergents dans les filières conventionnelles de traitement des eaux résiduaires urbaines (files eau et boues), et au cours du traitement tertiaire par charbon actif

    OpenAIRE

    Mailler , Romain

    2015-01-01

    The first chapter is dedicated to the conventional primary and biological treatments. Hence, removals of a wide range of priority and emerging micropollutants were assessed for primary settling, physico-chemical lamellar settling, low load activated sludge process and biofiltration. Hydrophobic compounds and metals, as well as volatile organic compounds and biodegradable pollutants are rather well eliminated by these treatments. Moreover, considering removals normalized with nitrogen removals...

  2. GPM GROUND VALIDATION AIRBORNE SECOND GENERATION PRECIPITATION RADAR (APR-2) GCPEX V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The GPM Ground Validation Airborne Second Generation Precipitation Radar (APR-2) GCPEx dataset was collected during the GPM Cold-season Precipitation Experiment...

  3. GPM GROUND VALIDATION AIRBORNE SECOND GENERATION PRECIPITATION RADAR (APR-2) GCPEX V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The Second Generation Airborne Precipitation Radar (APR-2) is a dual-frequency (13 GHz and 35 GHz), Doppler, dual-polarization radar system. It has a downward...

  4. Current status of integrated HFE V and V system of APR1400

    International Nuclear Information System (INIS)

    Lee, M. S.; Hong, J. H.; Lee, S. H.; Lee, Y. K.

    2006-01-01

    The first Advanced Light Water Reactor called Advanced Power Reactor (APR1400) has many specific features such as passive safety features, digital I and C, and digitalized main control room design. This digital-based neo-concept main control room design needs comprehensive verification and validation process to get the license for construction. An integrated system for APR1400 MMIS design validation is under development by KEPRI with the participating of KHNP. The facility which is based on the NUREG/CR-6393 and ANS3.5 can simulate all of the dynamic functions and responses of APR1400, and measure the human factors by using conventional subject methods and measuring the operator's biological signals. This system will be used in human factors V and V process of the PRM (NUREG0711) of APR1400 MMIS design. (authors)

  5. Treatment and final conditioning of solid radioactive wastes; Traitement et conditionnement definitif des dechets radioactifs solides

    Energy Technology Data Exchange (ETDEWEB)

    Cerre, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The storage of solid radioactive wastes on a site is so cumbersome and dangerous that we have developed a method of treatment and conditioning by means of which the volume of waste is considerably reduced and very long-lasting shielding can be provided. This paper describes the techniques adopted at Saclay, where the wastes are sheared, compressed and enveloped in concrete of variable thickness. The main part of the report is devoted to a description of the corresponding remote handling installation. (author) [French] L'encombrement et le danger que presentent sur un site le stockage de dechets radioactifs solides nous ont amenes a etudier un mode de traitement et de conditionnement permettant une sensible reduction du volume des dechets et une protection de tres longue duree. La presente communication expose les techniques adoptees a Saclay ou les dechets sont cisailles, comprimes et enrobes dans du beton d'epaisseur variable. La description de l'installation telecommandee correspondante fait l'objet principal de cette communication. (auteur)

  6. Electron microscope study of irradiated beryllium oxide; Etude au microscope electronique de l'oxyde de beryllium irradie

    Energy Technology Data Exchange (ETDEWEB)

    Bisson, A A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-06-01

    utilisant des echantillons frittes. Les fractures sont examinees sous differents aspects. Ce sont les frittes les plus denses a fractures intragranulaires qui sont les plus interessants pour l'etude microscopique. Le 'pore' resultant du frittage est differencie de la 'bulle' qui peut se former au cours de traitements thermiques ulterieurs par suite de reactions donnant naissance a des gaz. Apres irradiation, la fragilisation intergranulaire est importante. Par recuit, on suit l'evolution des gaz, produits par les reactions (n. 2n) et (n, {alpha}), qui s'accumulent aux joints de grains. L oxyde de beryllium irradie est ensuite etudie par transmission. Pour cela, une methode simple a ete mise au point; elle consiste a examiner les eclats de cristaux broyes. Les amas de defauts ponctuels, formes par les neutrons, sont ainsi mis en evidence dans les cristaux irradies aux trois doses suivantes: 6.10{sup 19}, 9.10{sup 19} et 2.10{sup 20} n{sub r}.cm{sup -2} a une temperature inferieure a 100 deg. C. Pour l'irradiation a 6.10{sup 19} n{sub r}.cm{sup -2} les defauts sont a peine visibles mais a 2.10{sup 20} n{sub r}.cm{sup -2} les cristaux sont cribles d'amas alors que les lignes de Kikuchi ont disparu des diagrammes de microdiffraction. L'evolution des amas de defauts en boucles de dislocation est etudiee par des recuits successifs. L'energie d'activation de 0.37 eV, calculee a partir des courbes de recuits, incite a penser que ce sont les defauts interstitiels qui se condensent en boucles de dislocation. Des echantillons irradies a haute temperature sont egalement etudies (650, 900 et 1100 deg. C). Dans ceux-ci les boucles de dislocation atteignent un etat d'equilibre different de celui des precedentes. Ces dernieres boucles de dislocation sont etudiees plus specialement et leur vecteur de Burgers est determine par microdiffraction. (auteur)

  7. Catalytic activity of Au nanoparticles

    DEFF Research Database (Denmark)

    Larsen, Britt Hvolbæk; Janssens, Ton V.W.; Clausen, Bjerne

    2007-01-01

    Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change with par......Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change...... with particle size. We find that the fraction of low-coordinated Au atoms scales approximately with the catalytic activity, suggesting that atoms on the corners and edges of Au nanoparticles are the active sites. This effect is explained using density functional calculations....

  8. Profil épidémiologique de l'infection à VIH au cours d'une campagne ...

    African Journals Online (AJOL)

    Introduction: L'objectif de ce travail était de déterminer le profil épidémiologique de l'infection à VIH/SIDA au cours d'une campagne de sensibilisation à Yaoundé au Cameroun. Méthodes: Après avoir obtenu le consentement éclairé des participants, le dépistage de l'infection par le VIH a été effectué selon l'algorithme de ...

  9. Magnetic susceptibilities of liquid Cr-Au, Mn-Au and Fe-Au alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ohno, S.; Shimakura, H. [Niigata University of Pharmacy and Applied Life Sciences, Higashijima, Akiha-ku, Niigata 956-8603 (Japan); Tahara, S. [Faculty of Science, University of the Ryukyus, Nishihara-cho, Okinawa 903-0213 (Japan); Okada, T. [Niigata College of Technology, Kamishin’eicho, Nishi-ku, Niigata 950-2076 (Japan)

    2015-08-17

    The magnetic susceptibility of liquid Cr-Au, Mn-Au, Fe-Au and Cu-Au alloys was investigated as a function of temperature and composition. Liquid Cr{sub 1-c}Au{sub c} with 0.5 ≤ c and Mn{sub 1-c}Au{sub c} with 0.3≤c obeyed the Curie-Weiss law with regard to their dependence of χ on temperature. The magnetic susceptibilities of liquid Fe-Au alloys also exhibited Curie-Weiss behavior with a reasonable value for the effective number of Bohr magneton. On the Au-rich side, the composition dependence of χ for liquid TM-Au (TM=Cr, Mn, Fe) alloys increased rapidly with increasing TM content, respectively. Additionally, the composition dependences of χ for liquid Cr-Au, Mn-Au, and Fe-Au alloys had maxima at compositions of 50 at% Cr, 70 at% Mn, and 85 at% Fe, respectively. We compared the composition dependences of χ{sub 3d} due to 3d electrons for liquid binary TM-M (M=Au, Al, Si, Sb), and investigated the relationship between χ{sub 3d} and E{sub F} in liquid binary TM-M alloys at a composition of 50 at% TM.

  10. Traitements didactiques preventifs d'un type de conceptions erronees en sciences physiques chez des eleves du secondaire

    Science.gov (United States)

    Blondin, Andre

    hypotheses avec la cohorte suivante d'eleves chez qui se repetaient les memes conditions d'apprentissage. Nous avons utilise le design de recherche "posttest only" de Campbell et Stanley. En mai, apres le moment prevu dans la planification du programme pour donner le probleme aux eleves, nous avons suggere deux facons differentes de reviser la solution de ce probleme. Les eleves du premier groupe experimental ont revise sans que soit activee la connaissance anterieure apprehendee de la rotation de la Terre. Les eleves du deuxieme groupe experimental ont ete confrontes, par des questions et une simulation, au fait que la rotation de la Terre n'est pas une connaissance pertinente pour resoudre le probleme. Les groupes temoins et les groupes experimentaux ont ete choisis au hasard dans le bassin des ecoles secondaires de la commission scolaire. (Abstract shortened by UMI.)

  11. La Greffe de Peau dans le Traitement des Sequelles de la Main Brulee. A Propos de 152 Cas - Experience du Service de Chirurgie Plastique du Centre Hospitalier Universitaire Ibn-Sina, Rabat, Maroc

    Science.gov (United States)

    El Mazouz, S.; Fejjal, N.; Hafidi, J.; Cherkab, L.; Mejjati, H.; Belfqih, R.; Gharib, N.; Abbassi, A.

    2010-01-01

    Summary La main est fréquemment exposée aux brûlures, entraînant des séquelles esthétiques et fonctionnelles. Le traitement de ces séquelles est surtout chirurgical et consiste en la greffe de peau, dont le type dépend de la localisation de la brûlure et du type des séquelles. Dans ce travail rétrospectif, nous rapportons une série de 152 cas de brûlures des mains colligés au service de chirurgie plastique du Centre Hospitalier Universitaire Ibn-Sina de Rabat sur une période de dix ans, allant de 1998 à 2007. Les indications thérapeutiques dépendent du type de séquelles et de la localisation de la brûlure. En tout, 97 patients ont bénéficié d'une greffe cutanée, dont 76% par greffe de peau totale, 21% par greffe de peau demi-épaisse et 3% par peau fine. Les séquelles des brûlures des mains posent un problème thérapeutique majeur, malgré la diversité des procédés chirurgicaux, d'où l'intérêt de la prévention. PMID:21991196

  12. After Imagining/ Après l'imaginer: Imaginations

    Directory of Open Access Journals (Sweden)

    Managing Editors

    2010-12-01

    Full Text Available We welcome you to Imaginations: Journal of Cross-Cultural Image Studies / Revue d’études interculturelles de l’image, an open-access online peer-reviewed journal born out of research and developments in cross-cultural and intersecting epistemological fields that have at their root a determined focus on the role and power of the image in contemporary culture and in cultural communications. Nous vous souhaitons la bienvenue à Imaginations: Journal of Cross-Cultural Image Studies / Revue d’études interculturelles de l’image, un journal en ligne à accès libre dont les contributions sont préalablement soumises à un comité de révision par les pairs. Cette publication est le fruit d’un vif intérêt pour la recherche et la pratique au croisement de multiples champs épistémologiques et interculturels autour du rôle et de la puissance de l’image dans la société et les média contemporains.

  13. Exigences réglementaires et recommandations concernant le traitement de l'eau vis-à-vis des agents pathogènes en entrée et en sortie d'écloseries conchylicoles

    OpenAIRE

    Bonvarlet, Florence

    2011-01-01

    Ce document présente les exigences réglementaires et recommandations relatives aux différents traitement de l'eau en entrée et en sortie d'écloseries conchylicoles. Afin de respecter cette réglementation des solutions, des méthodes de traitement y sont mentionnées.

  14. Evaluation of late effects, esthetic results and quality of life after conservative treatment of breast cancer?; Evaluation des effets tardifs, du resultat esthetique et de la qualite de vie apres traitement conservateur du cancer du sein

    Energy Technology Data Exchange (ETDEWEB)

    Geffrelot, J.; Toudic-Emily, F.; Delozier, T.; Switsers, O.; Allouache, D.; Delcambre, C.; Segura, C.; Levy, C.; Dupont, M.; Joly, F. [Centre Francois-Baclesse, 14 - Caen (France)

    2009-10-15

    Purpose: to evaluate the delayed toxicity of two patterns of adjuvant radiotherapy including a breast irradiation, at the dose of 48 Gy in 20 seances and five weeks or 57.60 Gy in 24 seances and six weeks in case of majored factors of local recurrence risk. The secondary objective were the auto evaluation by the patient of the esthetic result and the influence of this last one on the quality of life. Conclusion: the delayed toxicity was dominated by the fibrosis low to moderated one, without any significant difference between the doses of 48 Gy and 57.60 Gy. The esthetic result evaluated by the patient, globally good, seemed however, damaged with the last pattern. A bad esthetic result, without affected the global quality of life was associated to more specific breast symptoms and damaged the perception of the body image. (N.C.)

  15. Gated blood-pool SPECT assessment of Wolff-Parkinson-White syndromes before and after radiofrequency ablation of accessory pathways; Evaluation fonctionnelle par tomographie cavitaire du syndrome de Wolff-Parkinson-White, avant et apres traitement par radiofrequence

    Energy Technology Data Exchange (ETDEWEB)

    Bontemps, L.; Ben Brahim, H.; Kraiem, T.; Chevalier, P.; Kirkorian, G.; Touboul, P.; Itti, R. [Hopital Cardiologique de Lyon, 69 (France)

    1997-08-01

    Radiofrequency (RF) ablation of accessory pathways in Wolff-Parkinson-White (WPW) syndrome is supposed to be less aggressive than fulguration while providing excellent results. The aims of our study were therefore the evaluation of the functional results of this therapy in terms of left or right ejection fractions and its effects on the contraction synchronism between both ventricular chambers, derived from bi-ventricular Fourier phase histograms. A consecutive series of 44 patients has been investigated within 48 hours before and after RF therapy: 14 patients had right sided WPW and 30 patients left sided WPW. Only patients for whom RF treatment was considered as a success have been included in the study. Gated blood pool tomography has been performed in order to localize the site of pre-excitation and to build-up the phase histograms for both ventricles, and planar gated imaging has been used for right and left ejection fraction determination. Functional results demonstrate the absence of deleterious effect of RF on ventricular contraction and rather a slight increase of ejection fractions, with a more statistically significant difference for left WPW (LVEF = 62.2 % before RF vs 64.4 % after RF; p = 0.02) than for right WPW (RVEF = 36.3 % before RF vs 39.7 after RF; p = 0.16). Phase analysis, on the contrary, show only significant differences for right WPW, with a noticeable decrease of the pre-excitation (left-to-right phase difference 14.4 deg before RF vs 7.5 deg after RF; p = 0.03) and a significant reduction of the right ventricular phase dispersion (right phase standard deviation 26.5 deg before RF vs 19.0 deg after RF; p = 0.03). For left WPW no measurable differences can be demonstrated in the basal state and it is suggested to use stimulation techniques in order to enhance the competition between the normal and accessory conduction pathways. (authors). 17 refs.

  16. Radioinduced optic nerve neuropathy after treatment for nasopharynx cancer. About two cases and literature review; Neuropathie radio-induite du nerf optique apres traitement pour cancer du nasopharynx. A propos de deux cas et revue de la litterature

    Energy Technology Data Exchange (ETDEWEB)

    Mnejja, W.; Siala, W.; Daoud, J. [Centre Hospitalier Universitaire Habib-Bourguiba, Service de Radiotherapie Carcinologique, Sfax (Tunisia); Fki, J. [Centre Hospitalier Universitaire Habib-Bourguiba, Service d' Ophtalmologie, Sfax (Tunisia); Ghorbel, M. [Centre Hospitalier Universitaire Habib-Bourguiba, Service d' ORL, Sfax (Tunisia); Frikha, M. [Centre Hospitalier Universitaire Habib-Bourguiba, Service de Carcinologie Medicale, Sfax (Tunisia)

    2007-11-15

    The radioinduced neuropathy of the optic nerve is a rare and delayed complication. Its incidence is difficult to evaluate in the literature. It depends on the whole irradiation dose, fractionation and irradiated volume. Currently, it does not exist any efficient treatment, only the prevention play an important part on avoiding the high doses, and the broad irradiation volumes. The innovating techniques using conformal radiotherapy with or without modulated intensity could contribute to reduce this toxicity incidence. (N.C.)

  17. Action of 50 R X-ray doses on the breeding function of C3H strain mice - effect of splitting the dose, action of repeated irradiations on successive generations; Action de 50 R de rayons X sur la fonction de reproduction des souris de race C3H - influence du fractionnement. Action de la repetition des irradiations au cours des generations successives

    Energy Technology Data Exchange (ETDEWEB)

    Alix, D [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1965-07-01

    X-rays exposure effect was studied on C3H strain mice, at the standpoint of the effects produced on breeding function. The method used with this purpose was the following: single doses 20 - 30 - 40 and 50 R/dose, fractional doses: 50 R/total dose, divided in 2 - 5 - 10 or 25 irradiations distributed in one month duration. The offsprings were irradiated at the same doses than the parents, consanguinity being maintained. Statistical treatment of results was carried out, that led at the following conclusions: 1) Couples receiving single exposure of 50 R or two exposures of 25 R at one month interval give comparable results. Fractional doses do not involve the slightest diminution of X-rays effect. 2) 30 R exposure brings about a decrease in fertility, with an increase in abortions. Fertility of 20 R irradiated couples remains below controls. 3) After ten times 5 R and twenty-five 2 R, the number of abortions is the largest. Ovarian function is particularly sensitive to X-rays; one may think that twenty-five 2 R give injuries conditioning non-viability of conception products, smaller doses should produce mutations and yield births of altered genotype individuals. (author) [French] L'action d'une exposition aux rayons X de souris de race C3H a ete etudiee du point de vue des effets produits sur la fonction reproductrice. La methode utilisee fut la suivante: doses administrees en irradiation unique: 20 - 30 - 40 et 50 R/seance, en irradiations fractionnees: 50 R au total en 2 - 5 - 10 ou 25 seances reparties en un mois. Les descendants ont ete irradies aux memes doses que leurs parents, en maintenant la consanguinite. Un traitement statistique des resultats a ete effectue dont on a pu conclure : 1) Chez les couples ayant recu une seule exposition de 50 R ou deux expositions de 25 R a intervalle d'un mois les resultats sont comparables. Le fractionnement n' entrainant aucune attenuation de l'action des rayons X. 2) Une exposition de 30 R entraine une baisse de fecondite

  18. Le CRDI au Ghana

    International Development Research Centre (IDRC) Digital Library (Canada)

    pour prévenir le paludisme, des études ayant démontré que leur utilisation pouvait réduire considérablement la mortalité infantile. Les chercheurs ont également suggéré aux gouvernements différents moyens pour inciter les gens à acheter les moustiquaires et à les utiliser correctement. Les TI au service de la démocratie.

  19. Mise au point

    African Journals Online (AJOL)

    et traité à temps, le risque de complications et de morbidité peut être écarté. Les auteurs rapportent 2 cas de kystes de la vallécule. La tomodensitométrie a confirmé la présence d'une formation kystique prenant origine au niveau de la val- lécule. Une laryngoscopie directe a été faite pour les 2 patients sous anesthésie ...

  20. Chemical treatment of uranium ores in France; Le traitement chimique des minerais d'uranium en France

    Energy Technology Data Exchange (ETDEWEB)

    Mouret, P; Sartorius, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The various processes of chemical treatmenturanium ores, from the oldest to the more recent, are exposed, considering the following conditions: economics, geography, techniques and safety. The interest of obtaining a final concentrate as uranyl nitrate is discussed. (author)Fren. [French] Les differents procedes de traitement chimique des minerais uraniferes sont exposes depuis les premiers jusqu'aux plus recents, en tenant compte des facteurs economiques, geographiques, techniques et de salubrite. L'interet d'obtenir un concentre final a l'etat de nitrate d'uranyle est discute. (auteur)

  1. Design characteristics of EU-APR1400 on-site power system

    International Nuclear Information System (INIS)

    Kim, D.H.; Kim, Y.S.; Kim, Y.S.

    2014-01-01

    In the global nuclear market, US and European design requirements have been largely used to develop the design of nuclear power plants(NPPs). The APR1400 design was developed on the basis of US regulatory guide and EPRI utility requirements document(URD). In order to enlarge the export market of APR1400, KHNP (Korea Hydro & Nuclear Power Co., Ltd) has developed the EU-APR1400 design which complies with the European nuclear design requirements. In this paper, the design characteristics of EU-APR1400 on-site power system developed according to the European design requirements of electrical power system are described. The European main design requirements of electrical power system involve 50 Hz rated frequency, 400/110 kV grid voltage, the application of the diversity and the redundancy, and so on. The EU-APR1400 on-site power system has been developed on the basis of these requirements. The representative designs include the redundancy, diversity, independence design, the emergency power supply design, the design for providing electrical power to the dedicated severe accident systems, and the design for European grid requirements. (author)

  2. Conceptual Designs for the Performance Improvement of APR1400 SIT and Preliminary Performance Evaluation

    International Nuclear Information System (INIS)

    Chu, In-Cheol; Kwon, Tae-Soon; Song, Chul-Hwa

    2008-01-01

    Some evolutionary type PWRs such as APR1400 and APWR adopt advanced safety injection tank (SIT). The SIT of APR1400 has a fluidic device (FD) which passively controls ECC water injection flow rate into reactor coolant system during refill and reflood phases of LB-LOCA (i.e., a high injection flow rate during the refill phase and a low injection flow rate during the reflood phase). The benefit of the FD is the elimination of the function of low pressure safety injection pump from the safety injection system. The flow controlling performance of the APR1400 FD was evaluated using a prototypical full-scale test facility, called VAPER (Valve Performance Evaluation Rig). Even though the performance of the APR1400 FD satisfied major design and licensing requirements, further improvement of the performance is expected such as the extension of total injection period, the delay of nitrogen gas discharge. Several conceptual designs have been being drawn out in order to improve the performance of the APR1400 SIT. The performance of some designs was evaluated using a small scale SIT test rig. The present paper introduces some of the conceptual designs and shows the performance evaluation experimental results

  3. 107 Définition structurale des linéaments par traitement d'image ...

    African Journals Online (AJOL)

    Valued Packard Bell Customer

    The Ngovayang massif represents a key domain in understanding the geodynamics of the northern border of the Congo craton in South Cameroon. Remote sensing works .... linéaments liés au socle rocheux et aux accidents tectoniques (Minyem, 1994 [2]). Ces linéaments sont repartis selon trois directions. - la direction ...

  4. Case report

    African Journals Online (AJOL)

    raoul

    9 janv. 2012 ... Après mesures de réanimation, le traitement chirurgical a été instauré, avec bonne évolution. Nous essayons à partir de ce cas .... une femme enceinte à cause du risque moins important de fausse couche (0 contre 12 % au premier trimestre) et d'accouchement prématuré (5 à8 % contre 30 % au troisième ...

  5. GOTHIC Simulation of APR1400 Auxiliary Charging Pump room heat up

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Hui-Un; Heo, Sun [KHNP, Daejeon (Korea, Republic of)

    2014-10-15

    As a part of the Advanced Power Reactor 1400 (APR1400) U. S. Nuclear Regulatory Commission Design Certification (NRC DC) project, we have been investigating Auxiliary Charging Pump (ACP) room heat up. With reference to the design specification of the ACP room, we determined input information and developed a GOTHIC model of the APR1400 ACP room. This calculation model is described herein, and representative results from the calculation are presented as well. The results of the present paper are used to determine the integrity of ACP operating in the accident. APR 1400 GOTHIC model was developed for ACP room heat up calculation. Calculation results confirm that door opening is cooling the room properly. It is found that the difference due to the surface option of heat conductors is insignificant. Based on this result, further studies should be performed to confirm integrity of ACP.

  6. The Ongoing Rediscovery of Après-Coup as a Central Freudian Concept.

    Science.gov (United States)

    House, Jonathan

    2017-10-01

    Après-coup, Freud's Nachträglichkeit, is an essential psychoanalytic concept structuring each of four concepts, four mental processes that lie at the foundation of Freud's thinking: psychic trauma, repression, the creation of the unconscious, and the creation of infantile sexuality. It is argued here that infantile sexual drives, in contrast to the self-preservative instincts, arise from a two-step process of translation and repression in which the residues of failed translation become source-objects of the drives. These residues of failed translation have an associative resonance with adult sexuality, and the child is driven to ongoing attempts to translate them, to make them meaningful après coup. Thus, après-coup is at the heart of the human subject as a sexual creature who requires, desires, and creates meaning.

  7. Probability Analysis of the Construction Cost of an APR1000 Single Unit

    International Nuclear Information System (INIS)

    Ha, Gak Hyeon; Suh, Yong Pyo; Kang, Yong Chul

    2011-01-01

    The nuclear power plant market is expected to grow rapidly in order to address issues of global warming, cutting CO 2 emissions and securing stable electricity supplies. Under these circumstances, the main primary goal of the APR1000 development is to ensure export competitiveness in the developing countries in the Middle East and Southeast Asia. To that end, APR1000 (1,000MWe, 3 rd generation) will be developed based on the OPR1000 (Korean standard nuclear power plant, 2.5 generation) by incorporating and improving the general requirements such as the 60 year design life time, comprehensive site requirement of 0.3g seismic design, stability improvement, operability improvement and provisions for severe accidents. The APR1000 adds 16 advanced design features to its predecessor, as outlined below in Table 1

  8. Seismic analysis of APR1400 RCS for site envelope using big mass method

    International Nuclear Information System (INIS)

    Kim, J. Y.; Jeon, J. H.; Lee, D. H.; Park, S. H.

    2002-01-01

    One of design concepts of APR1400 is the site envelope considering various soil sites as well as rock site. The KSNP's are constructed on the rock site where only the translational excitations are directly transferred to the plant. On the other hand, the rotational motions affect the responses of the structures in the soil cases. In this study, a Big Mass Method is used to consider rotational motions as excitations at the foundation in addition to translational ones to obtain seismic responses of the APR1400 RCS main components. The seismic analyses for the APR1400 excited simultaneously by translation and rotational motions were performed. The results show that the effect of soil sites is not significant for the design of main components and supports of the RCS, but it may be considerable for the design of reactor vessel internals, piping, and nozzles which have lower natural frequencies

  9. APR-246/PRIMA-1Met Inhibits and Reverses Squamous Metaplasia in Human Conjunctival Epithelium.

    Science.gov (United States)

    Li, Jing; Li, Cheng; Wang, Guoliang; Liu, Zhen; Chen, Pei; Yang, Qichen; Dong, Nuo; Wu, Huping; Liu, Zuguo; Li, Wei

    2016-02-01

    Squamous metaplasia is a common pathologic condition in ocular surface diseases for which there is no therapeutic medication in clinic. In this study, we investigated the effect of a small molecule, APR-246/PRIMA-1(Met), on squamous metaplasia in human conjunctival epithelium. Human conjunctival explants were cultured for up to 12 days under airlifting conditions. Epithelial cell differentiation and proliferation were assessed by Cytokeratin 10 (K10), K14, K19, Pax6, MUC5AC, and p63 immunostaining patterns. β-catenin and TCF-4 immunofluorescent staining and real-time PCR characterized Wnt signaling pathway involvement. Pterygium clinical samples were cultured under airlifting conditions with or without APR-246 for 4 days. p63, K10, β-catenin, and TCF-4 expression in pterygial epithelium was determined by immunofluorescent staining and real-time PCR. Airlift conjunctival explants resulted in increased stratification and intrastromal epithelial invagination. Such pathology was accompanied by increases in K10, K14, and p63 expression, whereas K19 and Pax6 levels declined when compared to those in freshly isolated tissue. On the other hand, APR-246 reversed all of these declines in K10, K14, and p63 expression. Furthermore, K19 and Pax6 increased along with rises in goblet cell density. These effects of APR-246 were accompanied by near restoration of normal conjunctival epithelial histology. APR-246 also reversed squamous metaplasia in pterygial epithelium that had developed after 4 days in ex vivo culture. Reductions in squamous metaplasia induced by APR-246 suggest it may provide a novel therapeutic approach in different squamous metaplasia-associated ocular surface diseases.

  10. Antibacterial Au nanostructured surfaces

    Science.gov (United States)

    Wu, Songmei; Zuber, Flavia; Brugger, Juergen; Maniura-Weber, Katharina; Ren, Qun

    2016-01-01

    We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was flat and rough reference surfaces. Our micro/nanofabrication process is a scalable approach based on cost-efficient self-organization and provides potential for further developing functional surfaces to study the behavior of microbes on nanoscale topographies.We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all

  11. Au pairs on Facebook

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2016-01-01

    Ethnographers are increasingly making use of Facebook to acquire access and general acquaintance with their field of study. However, little has been written on how Facebook is used methodologically in research that does not have social media sites as the main focus of interest. This article argues...... the au pairs resist and embrace such dominant representations, and on how such representations are ascribed different meanings in the transnational social fields of which the migrant are a part. The article is based on ethnographic fieldwork conducted between 2010 and 2014 in Denmark, the Philippines...

  12. Treatment, Processing and Future Disposal of Radioactive Wastes at the Idaho Chemical Processing Plant; Traitement et Elimination Future des Dechets Radioactifs a l'Usine de Traitement Chimique de L'Idaho; 0410 041d 0414 ; Tratamiento y Evacuacion de Desechos Radiactivos en la Planta de Tratamiento Quimico de Idaho

    Energy Technology Data Exchange (ETDEWEB)

    Stevens, James I. [Phillips Petroleum Company, Atomic Energy Division, Idaho Falls (United States)

    1960-07-01

    incorporer dans d'autres substances les dechets a eliminer est la production d'une masse solide contenant les produits de fission. L'inconvenient que constituent les frais de traitement plus eleves peut etre parfois compense par une reduction des frais de stockage. La faible conductivite thermique des corps solides donne plus d'importance a la temperature de stockage que dans le cas de liquides. Les dechets acides de nitrate d'aluminium provenant du traitement des combustibles du type de ceux que l'on utilise dans les reacteurs d'essai des materiaux peuvent etre transformes en aluminium granule par voie de calcination dans un lit fluidifie a une temperature allant de 350 Degree-Sign a 550 Degree-Sign C. Les principaux elements de l'installation sont: un calculateur chauffe au NaK, un systeme d'epuration des gaz d'echappement et un ensemble de recipients pour le stockage des matieres solides obtenues. L'auteur donne un apercu du processus de traitement et du programme de recherche et de mise au point. L'auteur examine un certain nombre de systemes futurs de stockage et leurs incidences sur le milieu ambiant en prenant pour base les resultats positifs de la demonstration du systeme de calcination a ht fluidifie et d'emmagasinage a haute temperature ainsi que d'autres considerations. (author) [Spanish] En la planta de tratamiento quimico de Idaho, los desechos acidos procedentes de la recuperacion del uranio enriquecido de los combustibles nucleares que contienen aluminio, zirconio y acero inoxidable se almacenan en tanques subterraneos de dos formas, con capacidades nominales de 30,000 y 300,000 galones. El autor describe la organizacion y funcionamiento de la seccion de tanques, asi como los metodos utilizados para la evacuacion de desechos de baja actividad. La evacuacion de desechos con arreglo al, principio de la 'concentracion y confinamiento' tiene por finalidad la obtencion de una masa solida que retenga los productos de fision. Los gastos mas elevados que este

  13. Une installation expérimentale pour l'étude du traitement par combustion des fumées industrielles An Experimental Plant for Processing Industrial Fumes by Combustion

    Directory of Open Access Journals (Sweden)

    Morillon R.

    2006-11-01

    Full Text Available Le rejet à l'atmosphère d'effluents gazeux d'origine industrielle entraîne un accroissement sensible de la pollution atmosphérique ; en outre, il s'accompagne souvent d'une perte d'énergie lorsque l'élément polluant est un hydrocarbure. Dans ce cas, l'utilisation du gaz naturel pour le traitement par combustion des fumées industrielles apporte une solution élégante et souvent peu coûteuse grâce à la récupération d'énergie qu'il est possible de faire. La première partie de l'article rappelle les aspects théoriques de ce traitement ; en particulier, l'influence des divers éléments sur son efficacité y est discutée (composition de l'atmosphère polluée, température, temps de séjour, etc.. II apparaît ainsi que diverses conditions doivent être remplies simultanément pour obtenir une efficacité satisfaisante. Afin de disposer d'éléments d'ingénierie permettant de construire les unités de traitement les plus efficaces et les plus sûres possible, au coût le plus bas possible, la Direction des études et techniques nouvelles du Gaz de France a réalisé une installation expérimentale qui est présentée dans la deuxième partie de l'article. Enfin, quelques examples d'utilisation de cette installation expérimentale, qui constitue un nouvel outil de travail mis à la disposition des utisitateurs et des constructeurs, sont décrits dans la troisième partie de l'article. The discharge into the atmosphere of industrial waste gases causes substantially increased air pollution. Moreover, it is often accompanied by loss of energy when the polluting element is a hydrocarbon. In such cases, the use of natural gas for processing industrial fumes by combustion provides an elegant solution, which moy often prove economical too becouse of the recovery of energy it makes possible. The first part of this article reviews the theoretical aspects of such processing. The way in which its effectiveness is affected by various parameters

  14. Speech Processing in Realistic Battlefield Environments (Le Traitement de la Parole en Environnement de Combat Realiste)

    Science.gov (United States)

    2009-04-01

    accessed utilizing 4 Watkins Johnson (WJ-8611) receivers connected to a high quality 24 channel Mark Of The Unicorn 24I/O analog-to-digital... Government Reports Announcements & Index (GRA&I) STAR peut être consulté en ligne au localisateur de ressources publié par le National Technical...given in the following journals: Scientific and Technical Aerospace Reports (STAR) Government Reports Announcements & Index (GRA&I) STAR is available

  15. Place de l'embrochage fasciculé selon Hackethal dans le traitement ...

    African Journals Online (AJOL)

    A travers cette étude rétrospective, nous avons revu 80 patients traités initialement par embrochage fasciculé centromédullaire selon Hackethal au service de traumatologie orthopédie de l'hôpital militaire Avicenne entre janvier 2000 et janvier 2012. Les fractures ont été classées selon la classification AO et selon la ...

  16. Antibacterial Au nanostructured surfaces.

    Science.gov (United States)

    Wu, Songmei; Zuber, Flavia; Brugger, Juergen; Maniura-Weber, Katharina; Ren, Qun

    2016-02-07

    We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was flat and rough reference surfaces. Our micro/nanofabrication process is a scalable approach based on cost-efficient self-organization and provides potential for further developing functional surfaces to study the behavior of microbes on nanoscale topographies.

  17. Cluster-to-cluster transformation among Au6, Au8 and Au11 nanoclusters.

    Science.gov (United States)

    Ren, Xiuqing; Fu, Junhong; Lin, Xinzhang; Fu, Xuemei; Yan, Jinghui; Wu, Ren'an; Liu, Chao; Huang, Jiahui

    2018-05-22

    We present the cluster-to-cluster transformations among three gold nanoclusters, [Au6(dppp)4]2+ (Au6), [Au8(dppp)4Cl2]2+ (Au8) and [Au11(dppp)5]3+ (Au11). The conversion process follows a rule that states that the transformation of a small cluster to a large cluster is achieved through an oxidation process with an oxidizing agent (H2O2) or with heating, while the conversion of a large cluster to a small one occurs through a reduction process with a reducing agent (NaBH4). All the reactions were monitored using UV-Vis spectroscopy and ESI-MS. This work may provide an alternative approach to the synthesis of novel gold nanoclusters and a further understanding of the structural transformation relationship of gold nanoclusters.

  18. Charged particle density distributions in Au + Au collisions at ...

    Indian Academy of Sciences (India)

    Charged particle pseudorapidity distributions have been measured in Au + Au collisions using the BRAHMS detector at RHIC. The results are presented as a function of the collision centrality and the center of mass energy. They are compared to the predictions of different parton scattering models and the important role of ...

  19. Using a Classroom Response System to Improve Multiple-Choice Performance in AP[R] Physics

    Science.gov (United States)

    Bertrand, Peggy

    2009-01-01

    Participation in rigorous high school courses such as Advanced Placement (AP[R]) Physics increases the likelihood of college success, especially for students who are traditionally underserved. Tackling difficult multiple-choice exams should be part of any AP program because well-constructed multiple-choice questions, such as those on AP exams and…

  20. Effectiveness of External Reactor Vessel Cooling (ERVC) strategy for APR1400 and issues of phenomenological uncertainties

    International Nuclear Information System (INIS)

    Oh, S.J.; Kim, H.T.

    2007-01-01

    The APR1400(Advanced Power Reactor 1400) is an evolutionary advanced light water reactor with rated thermal power of 4000 MWt. For APR1400, External Reactor Vessel Cooling (ERVC) is adopted as a primary severe accident management strategy for in-vessel retention (IVR) of corium. The ERVC is a method of IVR by submerging the reactor vessel exterior. At the early stage of the APR1400 design, only ex-vessel cooling, cooling of the core melt outside the vessel after vessel is breached, is considered based on the EPRI Utility Requirement Document for Evolutionary LWR. However, based on the progress in implementation of Severe Accident Management Guidance (SAMG) for operating plants, as well as the research findings related to ERVC, ERVC strategy is adopted as a part of key severe accident management strategies. To improve its success, the strategy is reviewed and we implemented necessary design arrangement to increase its usefulness in managing the severe accident. In this paper, we examine the evolution of ERVC concept and its implementation in APR1400. Then, we review possible approach, including Risk-Oriented Accident Analysis Methodology (ROAAM), to evaluate the effectiveness of the strategy. (authors)

  1. An investigation of major influences on the seismic response of APR1400 reactor vessel internals - 15145

    International Nuclear Information System (INIS)

    Byun, Y.J.; Kim, J.G.; Sung, K.K.; Lee, D.H.

    2015-01-01

    This paper deals with 3 topics concerning the APR1400 reactor vessel internals (RVI) seismic analysis: nonlinear problems, approaches to account for uncertainties of seismic model, and dynamic responses to various seismic excitations. First, the noticeable nonlinear characteristics of the RVI seismic model are discussed, and the modeling methods for properly simulating the nonlinear behaviors of RVI under seismic loads are presented. By applying these methods to the seismic model, the seismic analysis can correctly predict the dynamic response of RVI. Next, two approaches to account for the uncertainties of seismic model are evaluated: the time history broadening method, and the sensitivity analysis based on NUREG-0800, Section 4.2, Appendix A. From the evaluation results, it is confirmed that the time history broadening method employed in the seismic analysis of APR1400 RVI sufficiently accounts for the uncertainty of seismic model. Finally, the response characteristics of APR1400 RVI to various seismic excitations are investigated. The seismic excitations corresponding to various soil profiles, including the effects of cracked and un-cracked concrete stiffness on the reactor containment building structure, are used as forcing functions. From this study, the effects of various site conditions on the dynamic response of APR1400 RVI are identified. As a result, the enveloped seismic responses obtained from this study will contribute to the development of RVI seismic design that covers a wide range of potential site conditions. (authors)

  2. System Response Analysis of Rod Ejection Accident for APR1400 Using KNAP Hot Spot Model

    International Nuclear Information System (INIS)

    Kim, Yo-Han; Ha, Sang-Jun; Jun, Hwang-Yong

    2006-01-01

    Korea Electric Power Research Institute (KEPRI) has been developed the non-loss-of-coolant accident (non- LOCA) analysis methodology, called as the Korea Non- LOCA Analysis Package (KNAP), for the typical Optimized Power Reactor 1000 (OPR1000) plants. Considering current licensing methodology conducted by ABB-CE, however, the KNAP could be applied to Advanced Power Reactor 1400 (APR1400) also. In spite of some difference in design concepts of two plant types, there is a close resemblance between their nuclear steam supply systems (NSSS). So, in this study, the rod ejection accident (REA) event was analyzed using KNAP hot spot model (HSM) for APR1400 to estimate the feasibility of the application and the results were compared with those given in APR1400 Standard Safety Analysis Report (SSAR), which were calculated using the CESEC-III and STRIKIN-II code of ABB-CE. Through the study, it was concluded that the KNAP could be applicable to APR1400 on the view point of REA

  3. The Alberta Pregnancy Outcomes and Nutrition (APrON) cohort study : rationale and methods

    NARCIS (Netherlands)

    Kaplan, Bonnie J.; Giesbrecht, Gerald F.; Leung, Brenda M. Y.; Field, Catherine J.; Dewey, Deborah; Bell, Rhonda C.; Manca, Donna P.; O'Beirne, Maeve; Johnston, David W.; Pop, Victor J.; Singhal, Nalini; Gagnon, Lisa; Bernier, Francois P.; Eliasziw, Misha; McCargar, Linda J.; Kooistra, Libbe; Farmer, Anna; Cantell, Marja; Goonewardene, Laki; Casey, Linda M.; Letourneau, Nicole; Martin, Jonathan W.

    The Alberta Pregnancy Outcomes and Nutrition (APrON) study is an ongoing prospective cohort study that recruits pregnant women early in pregnancy and, as of 2012, is following up their infants to 3 years of age. It has currently enrolled approximately 5000 Canadians (2000 pregnant women, their

  4. The Alberta Pregnancy Outcomes and Nutrition (APrON) cohort study : Rationale and methods

    NARCIS (Netherlands)

    Kaplan, B.J.; Giesbrecht, G.F.; Leung, B.M.; Field, C.J.; Dewey, D.; Bell, R.C.; Manca, D.P.; O'Beirne, M.; Johnston, D.W.; Pop, V.J.M.; Singhal, N.; Gagnon, L.; Bernier, F.P.; Eliasziw, M.; McCargar, L.J.; Kooistra, L.; Farmer, A.; Cantell, M.; Goonewardene, L.; Casey, L.M.; Letourneau, N.; Martin, J.W.

    2014-01-01

    The Alberta Pregnancy Outcomes and Nutrition (APrON) study is an ongoing prospective cohort study that recruits pregnant women early in pregnancy and, as of 2012, is following up their infants to 3 years of age. It has currently enrolled approximately 5000 Canadians (2000 pregnant women, their

  5. Greta Kaits 9. apr. 1928 - 29. aug. 1946 : [luuletused] / Mats Traat

    Index Scriptorium Estoniae

    Traat, Mats, 1936-

    2008-01-01

    Sisu : Greta Kaits 9. apr. 1928 - 29. aug. 1946 ; Villem Hänilane 1898 - 1952 ; Peeter Pedak 1897 - 1953 ; Max Äidse 1903 - 1959 ; Lavinia Laidam ; Buchard Pruus ; Sergei Krivokopõtov ; Allan Luht 5. VII 1962 - 17. V 2007 ; Karl Saarmets 9. III 1924 - 14. IX 1981 ; Raimo Ritsik

  6. Neuchatel ne gardera pas le Palais de l'equilibre apres Expo.02

    CERN Multimedia

    2002-01-01

    "La ville de Neuchatel ne souhaite pas conserver le Palais de l'equilibre apres Expo.02. Par 24 voix contre 7, le Conseil general a rejete le plan special du Conseil communal qui proposait de transformer l'edifice en un centre de congres" (1/2 page).

  7. Effect of Decontamination of Feed Mixtures by Heat Treatment and Gamma Radiation on Growth and Feed Conversion in Fattening Pigs; Effet de la Decontamination de Melanges Alimentaires par Traitement Thermique et Irradiation Gamma sur la Croissance et sur la Conversion des Aliments Chez les Porcs d'Elevage; Vliyanie obezzarazhivaniya kormovykh smesej teplovoj obrabotkoj i gamma-oblucheniem na rost i.konversiyu pishchi u otkarmlivaemykh svinej; Efecto de la Descontaminacion por Tratamiento Termico e Irradiacion Gamma de Piensos Compuestos Sobre el Desarrollo y Engorde de Cerdos Cebones

    Energy Technology Data Exchange (ETDEWEB)

    Dammers, J.; Kampelmacher, E. H.; Edel, W.; Van Schothorst, M. [Research Institute for Animal Nutrition, Hoorn (Netherlands); National Institute of Public Health, Utrect (Netherlands)

    1966-11-15

    chaleur et le troisieme des aliments non traites. L'experience etait menee parallelement dans deux instituts differents, afin de tenir compte des facteurs geographiques, et portait donc sur un nombre total de 48 betes. Le traitement thermique a ete pratique a une temperature de 80 a 85 Degree-Sign C pendant 30 min. Les enterobacteriacees contenues dans les nourritures non traitees ont ete comptees; on en a trouvee 1,0 x 10{sup 5}/g. Apres les deux traitements de decontamination, on a preleve au hasard 30 echantillons de 50 g des produits traites et on a recherche les enterobacteriacees apres enrichissement. On a constate que cinq des echantillons traites par la chaleur et deux des echantillons irradies n'etaient pas entierement exempts de ces bacteries; toutefois, ces echantillons peuvent etre consideres comme suffisamment decontamines en ce qui concerne Salmonella. Dans l'un des instituts, les porcs ont ete engraisses pendant a peu pres 100 jours et ont atteint un poids d'environ 100 kg. La croissance moyenne par animal et par jour etait de 767 g pour le groupe alimente avec des nourritures non traitees, de 770 g pour le groupe engraisse avec des nourritures traitees par la chaleur, et de 800 g pour le groupe eleve avec des nourritures irradiees. La quantite de nourriture absorbee par kilogramme de croissance pour ces memes groupes etait de 2,85, 2,81 et 2,74 respectivement. Dans l'autre institut, les porcs ont ete engraisses pendant 155 jours environ et ont atteint un poids de pres de 116 kg. La croissance moyenne par animal et par jour etait de 627 g pour le groupe alimente avec de la nourriture non traitee, de 643 g pour le groupe alimente avec de la nourriture traitee par la chaleur, et de 625 g pour le groupe engraisse avec des aliments irradies. La quantite de nourriture absorbee par kilogramme d'accroissement ont ete pour ces differents groupes de 3,30, 3,23 et 3,24 kg respectivement. On peut conclure d'apres ces resultats que ni l'irradiation ni le traitement

  8. Système multiprocesseur à base de réseau sur puce destiné au traitement de la radio logicielle et la radio cognitive

    OpenAIRE

    Taj , Muhammad Imran

    2011-01-01

    Software Defined Radio (SDR) and Cognitive Radio (CR) are entering mainstream. These high performance and high adaptability requiring devices with agile frequency operations hold promise to :1. address the inconsistency between hardware and software advancements, 2. real time mode switching from one radio configuration to another and3. efficient spectrum management in under-utilized spectrum bands. Framed within this statement, in this thesis we have implemented a SDR waveform on 16 Processin...

  9. Functional similarities between the dictyostelium protein AprA and the human protein dipeptidyl-peptidase IV.

    Science.gov (United States)

    Herlihy, Sarah E; Tang, Yu; Phillips, Jonathan E; Gomer, Richard H

    2017-03-01

    Autocrine proliferation repressor protein A (AprA) is a protein secreted by Dictyostelium discoideum cells. Although there is very little sequence similarity between AprA and any human protein, AprA has a predicted structural similarity to the human protein dipeptidyl peptidase IV (DPPIV). AprA is a chemorepellent for Dictyostelium cells, and DPPIV is a chemorepellent for neutrophils. This led us to investigate if AprA and DPPIV have additional functional similarities. We find that like AprA, DPPIV is a chemorepellent for, and inhibits the proliferation of, D. discoideum cells, and that AprA binds some DPPIV binding partners such as fibronectin. Conversely, rAprA has DPPIV-like protease activity. These results indicate a functional similarity between two eukaryotic chemorepellent proteins with very little sequence similarity, and emphasize the usefulness of using a predicted protein structure to search a protein structure database, in addition to searching for proteins with similar sequences. © 2016 The Protein Society.

  10. Functional similarities between the dictyostelium protein AprA and the human protein dipeptidyl‐peptidase IV

    Science.gov (United States)

    Herlihy, Sarah E.; Tang, Yu; Phillips, Jonathan E.

    2017-01-01

    Abstract Autocrine proliferation repressor protein A (AprA) is a protein secreted by Dictyostelium discoideum cells. Although there is very little sequence similarity between AprA and any human protein, AprA has a predicted structural similarity to the human protein dipeptidyl peptidase IV (DPPIV). AprA is a chemorepellent for Dictyostelium cells, and DPPIV is a chemorepellent for neutrophils. This led us to investigate if AprA and DPPIV have additional functional similarities. We find that like AprA, DPPIV is a chemorepellent for, and inhibits the proliferation of, D. discoideum cells, and that AprA binds some DPPIV binding partners such as fibronectin. Conversely, rAprA has DPPIV‐like protease activity. These results indicate a functional similarity between two eukaryotic chemorepellent proteins with very little sequence similarity, and emphasize the usefulness of using a predicted protein structure to search a protein structure database, in addition to searching for proteins with similar sequences. PMID:28028841

  11. 75 FR 44847 - Proposed Collection; Comment Request for Forms 943, 943-PR, 943-A, and 943A-PR

    Science.gov (United States)

    2010-07-29

    ... 943, 943-PR, 943- A, and 943A-PR AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and... comments concerning Forms 943, Employer's Annual Tax Return for Agricultural Employees, 943-PR, Planilla..., Agricultural Employer's Record of Federal Tax Liability, and 943A-PR, Registro De La Obligacion Contributiva...

  12. 78 FR 47051 - Proposed Collection; Comment Request for Forms 943, 943-PR, 943-A, and 943A-PR

    Science.gov (United States)

    2013-08-02

    ... 943, 943-PR, 943- A, and 943A-PR AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice and..., 943-PR, Planilla Para La Declarcion Anual De La Contribucion Federal Del Patrono De Empleados Agricolas, 943-A, Agricultural Employer's Record of Federal Tax Liability, and 943A-PR, Registro De La...

  13. Use of X-ray fluorescence in a laboratory for the treatment of uranium ores (1960); Utilisation de la fluorescence X dans un laboratoire de traitements de minerais d'uranium (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Guillet, H [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    A brief description will be given of some aspects of the experience gained over a year during which X-ray fluorescence was used at the laboratory or the present Section Autonome d'Etudes, Recherches et Applications Chimiques of the Commissariat a l'Energie Atomique. First part. - Reproducibility of results. A standard is tested daily. The observations made during the months from december 58 to may 59 are described. Second part. - Study of two chemical treatment processes using X-ray fluorescence, without development of a detailed method of analysis. a) Acid lixiviation of uranium ores. The residues are analysed by X-Ray fluorescence directly in powder form. b) Fixation and elution of vanadium on ion exchange resin. Third part. - Method for the quantitative analysis of the uranium in solution. A method of analysis of the uranium in solution is described for concentrations between 30 {gamma}/cc and 600 {gamma}/cc, whatever may be the impurities present (except for the elements between Zn and Rb, and between Ir and Pa). (author) [French] On se propose de decrire brievement quelques aspects de l'experience acquise en une annee d'utilisation de fluorescence X au laboratoire de l'actuelle Section Autonome d'Etudes, Recherches et Applications chimiques du Commissariat a l'Energie Atomique. Premiere Partie. - Etude de la reproductibilite des resultats. Un standard est teste quotidiennement. On donne la description des observations faites durant les mois de decembre 58 a mai 59. Deuxieme Partie. - Etude de deux procedes de traitements chimiques au moyen de la fluorescence X sans mise au point de methode d'analyse elaboree. a) Liziviation acide de minerais d'uranium. Les residus sont analyses par fluorescence X directement sous forme pulverulente. b) Fixation et elution du vanadium sur resine echangeuse d'ions. Troisieme partie. - Methode d'analyse quantitative de l'uranium en solution. On decrit une methode d'analyse de l'uranium en solution pour des concentrations allant

  14. Traitement des diagraphies acoustiques. Deuxième partie : séparation des ondes en diagraphie acoustique Full-Waveform Acoustic Data Processing. Second Part: Wave Separation in Acoustic Well Logging

    OpenAIRE

    Gavin P.; Mari J. L.

    2006-01-01

    L'utilisation d'outils acoustiques à émetteurs-récepteurs multiples et enregistrement numérique permet de faire une microsismique de puits en utilisant des techniques de traitement dérivées du traitement sismique. Comme les enregistrements acoustiques sont composés de différents types d'ondes (ondes de volume réfractées ou réfléchies et ondes d'interface), une étape importante du traitement acoustique est la séparation des ondes. Cet article montre que la séparation des ondes peut être optimi...

  15. Preliminary Design of Optimized Reactor Insulator for Severe Accident Mitigation of APR1400

    International Nuclear Information System (INIS)

    Heo, Sun; Lee, Jae-Gon; Kang, Yong-Chul

    2007-01-01

    APR1400, a Korean evolutionary advance light water reactor, has many advanced safety feature to prevent and mitigate of design basis accident (DBA) and severe accident. When reactor cooling system (RCS) fails to cooling its core, the core melted down and the molten core gathers together on bottom of reactor vessel. The molten core hurts reactor vessel and is released to containment, which raises the release of radioactive isotopes and the heating of the containment atmosphere. Finally, the corium is accumulated in the bottom of reactor cavity and it also raises the Molten Core and Concrete Interaction (MCCI) and the heating of containment atmosphere. There are two strategies to cooling molten core. Those are in-vessel retention and ex-vessel cooling. At the early stage of APR1400 design, only ex-vessel cooling which is cooling of the molten core outside the vessel after vessel failure is considered based on EPRI Utility Requirement Document (URD) for Evolutionary LWR. However, a need has been arisen to reflect current research findings on severe accident phenomena and mitigation technologies to Korean URD and IVRERVC (In-Vessel corium Retention using Ex-Reactor Vessel Cooling) was adopted APR1400. The ERVC is not considered as a licensing design basis but based on the defense-in-depth principle and safety margin basis, which is the top-tier requirement of the severe accident mitigation design as stated in the KURD. The Severe Accident Management strategy for APR1400 is intended to aid the plant operating staff to secure reactor vessel integrity in the early stage of the severe accident. As a part of a design implementation of IVR-ERVC for APR1400, we developed the preliminary design requirement, design specification and conceptual design

  16. [Evaluation of the capacity of the APR-DRG classification system to predict hospital mortality].

    Science.gov (United States)

    De Marco, Maria Francesca; Lorenzoni, Luca; Addari, Piero; Nante, Nicola

    2002-01-01

    Inpatient mortality has increasingly been used as an hospital outcome measure. Comparing mortality rates across hospitals requires adjustment for patient risks before making inferences about quality of care based on patient outcomes. Therefore it is essential to dispose of well performing severity measures. The aim of this study is to evaluate the ability of the All Patient Refined DRG system to predict inpatient mortality for congestive heart failure, myocardial infarction, pneumonia and ischemic stroke. Administrative records were used in this analysis. We used two statistics methods to assess the ability of the APR-DRG to predict mortality: the area under the receiver operating characteristics curve (referred to as the c-statistic) and the Hosmer-Lemeshow test. The database for the study included 19,212 discharges for stroke, pneumonia, myocardial infarction and congestive heart failure from fifteen hospital participating in the Italian APR-DRG Project. A multivariate analysis was performed to predict mortality for each condition in study using age, sex and APR-DRG risk mortality subclass as independent variables. Inpatient mortality rate ranges from 9.7% (pneumonia) to 16.7% (stroke). Model discrimination, calculated using the c-statistic, was 0.91 for myocardial infarction, 0.68 for stroke, 0.78 for pneumonia and 0.71 for congestive heart failure. The model calibration assessed using the Hosmer-Leme-show test was quite good. The performance of the APR-DRG scheme when used on Italian hospital activity records is similar to that reported in literature and it seems to improve by adding age and sex to the model. The APR-DRG system does not completely capture the effects of these variables. In some cases, the better performance might be due to the inclusion of specific complications in the risk-of-mortality subclass assignment.

  17. Article Original Traitement de l'incontinence urinaire post-opéra ...

    African Journals Online (AJOL)

    ra

    10 avr. 2008 ... tionnel au retrait de la sonde urinaire) et une infection de la bandelette survenue à un mois nécessitant son retrait. Ce dernier patient avait un diabète mal équilibré et un passé d'infections urinaires à répétition. Nous n'avons pas observé de douleurs pé- rinéales persistantes ni d'érosion urétrale ni.

  18. Re-irradiation after salvage mastectomy for local recurrence after a conservative treatment: a retrospective analysis of twenty patients (Nancy: 1988-2001); Re-irradiation parietale apres mastectomie de rattrapage pour recidive d'un cancer du sein apres traitement conservateur: etude retrospective sur 20 patientes (Nancy: 1988-2001)

    Energy Technology Data Exchange (ETDEWEB)

    Racadot, S.; Marchal, C.; Charra-Brunaud, C.; Peiffert, D.; Bey, P. [Centre Alexis-Vautrin, Service de Radiotherapie, 54 - Vandoeuvre-les-Nancy (France); Verhaeghe, J.L. [Centre Alexis-Vautrin, Service de Chirurgie, 54 - Vandoeuvre-les-Nancy (France)

    2003-12-01

    Purpose. - To retrospectively assess the efficacy of post-mastectomy re-irradiation for local relapse of breast cancer. Patients and methods. - Twenty patients, initially treated by conservative surgery and radiotherapy (50 Gy in 25 fractions over 5 weeks) were treated from 1998 to 2001 for a local relapse by salvage mastectomy and re-irradiation (either electron or photon beams). Mean age was 53 years (31-71). Reasons for re-irradiation were that the local relapses were inflammatory (4 pts), multifocal (5 pts), cutaneous (5 pts), involved the nipple (3 pts) or because the surgical margins (either muscle or skin) were involved (3 pts). The median dose of re-irradiation was 45 Gy (33-65) in 15 fractions over 33 days. Mean follow-up was 48 months (5-97). Results. - Fifteen patients remained free of a second local recurrence and 10 were still alive, without metastasis. Neither the dose of re-irradiation nor the irradiated surfaces were prognostic factors of local control (P = 0.877 and P = 0.424). Five patients developed radiation-induced pneumonitis without functional respiratory impairment. The incidence of pneumonitis seemed to be related to the biological dose of re-irradiation (P = 0.037). Other late complications occurred such as pigmentation changes (12 pts), telangiectasia (8 pts), chondritis (2 pts), parietal fibrosis (7 pts), rib fractures (4 pts), severe pain (11 pts) and lymphedema (2 pts). The increase in biological equivalent dose was highly statistically linked with the occurrence of disabling pain (P = 0.0123). Conclusion. - Parietal re-irradiation achieves good and lasting local control with an acceptable rate of acute complications but with a risk of disabling late sequelae such as severe pain. (author)

  19. The treatment and conditioning of solid radioactive waste (1962); Le traitement et le conditionnement des dechets radioactifs solides (1982)

    Energy Technology Data Exchange (ETDEWEB)

    Cerre, P; Mestre, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    Previous studies, the results of which have been confirmed by experiments, have led us to build a semi-industrial plant for the treatment and coating of solid radioactive waste. This report details the means at our disposal in a pilot plant which, apart from being used for tests, was also routine-operated. It is thus possible to give also an appreciation of its operation in this report. (authors) [French] Les etudes anterieures, dont les resultats ont ete confirmes par des essais, nous ont conduits a realiser une installation semi-industrielle de traitement et d'enrobage des dechets radioactifs solides. Le rapport a pour but de preciser les moyens mis a notre disposition dans une unite pilote qui, outre son role de banc d'essai, a pu etre exploitee en routine. C'est donc aussi un bilan de son exploitation qui est presente. (auteurs)

  20. Multifragmentation in Au + Au collisions studied with AMD-V

    Energy Technology Data Exchange (ETDEWEB)

    Ono, Akira [Tohoku Univ., Sendai (Japan). Faculty of Science

    1998-07-01

    AMD-V is an optimum model for calculation of multifragmentation in Au + Au collisions. AMD-V consider anti-symmetry of incident nucleus, target nucleus and fragments, furthermore, it treat the quantum effect to exist many channels in the intermediate and final state. 150 and 250 MeV/nucleon incident energy were used in the experiments. The data of multifragment atom in {sup 197}Au + {sup 197}Au collisions was reproduced by AMD-V calculation using Gognny force, corresponding to the imcompressibility of nuclear substance K = 228 MeV and its mean field depend on momentum. When other interaction (SKG 2 force, corresponding to K = 373 KeV) was used an mean field does not depend on momentum, the calculation results could not reproduce the experimental values, because nucleus and deuteron were estimated too large and {alpha}-particle and intermediate fragments estimated too small. (S.Y.)

  1. Review of the {sup 60}Co Source. Development Program at Brookhaven National Laboratory; Le Programme de Mise au Point des Sources au {sup 60}Co au Laboratoire National de Brookhaven; Obzor programmy po razrabotke istochnikov {sup 60}Co v brukkhejvenskoj natsional'noj laboratorii; El Programa de Preparacion de Fuentes de {sup 60}Co del Laboratorio Nacional de Brookhaven

    Energy Technology Data Exchange (ETDEWEB)

    Kuhl, O. A. [Brookhaven National Laboratory, Upton, NY (United States)

    1966-11-15

    : tubes de grande dimension et bandes plates. Elles ont ete utilisees tout d'abord.pour des recherches au Laboratoire national de Brookhaven. Plus tard, d'autres centres ont ete autorises a utiliser les installations d'irradiation prevues pour ces sources, A mesure que l'interet grandissait, des ensembles sources-irradiateurs ont ete mis a la disposition d'autres chercheurs. Des chateaux pour l'expedition des sources ont ete mis au point. De petites cellules chaudes et des piscines d'eau ont ete construites pour utiliser les sources. L'auteur decrit les methodes dosimetriques, la mesure de l'activite et les caracteristiques des irradiateurs pour ces sources. La rentabilite etait en general sans importance au stade de la recherche; toutefois, du fait que l'on envisage d'utiliser des sources de rayonnement de grande dimension pour le traitement des produits alimentaires, des produits chimiques et des fournitures medicales, il faudra etudier de pres les aspects techniques et economiques de la conception des sources. La mise au point des sources universelles des types I et II du Laboratoire national de Brookhaven, deja utilisees dans plusieurs installations, doit permettre de repondre a ces imperatifs. Les sources I et II sont interchangeables. La conception de la source II est amelioree en ce sens que la gaine interieure est metallurgiquement liee a l'ame de cobalt. Il est maintenant possible, pour la premiere fois, de reactiver les sources apres une certaine periode d'utilisation. Les sources en bandes ont des dimensions permettant d'en faire aisement des plaques de tailles et formes diverses. L'auteur decrit les principes de conception, les methodes de fabrication et les methodes d'essai ainsi que l'analyse des sources et l'evaluation de leur activite. Il les compare avec d'autres types de sources actuellement utilises et discute les avantages economiques et techniques respectifs. (author) [Spanish] A peticion de la Comision de Energia Atomica de los Estados Unidos, el

  2. Solvent purification using a current of water vapour. A continuous process applicable to chemical plants treating irradiated fuels; Purification des solvants par entrainement a la vapeur d'eau. Procede continu applicable aux usines chimiques de traitement des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, P R; Sautray, R R; Girard, B R [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1964-07-01

    zirconium-niobium apres traitement est indecelable et il est facile d'obtenir des facteurs de decontamination de 300 sur le ruthenium. La presence d'uranium favorise la decontamination. Pour terminer, le lecteur trouvera des considerations extra-techniques et en particulier l'ordre de grandeur des prix de revient du litre de solvant traite. (auteurs)

  3. Deletion of aprA and nprA genes for alkaline protease A and neutral protease A from bacillus thuringiensis: effect on insecticidal crystal proteins.

    Science.gov (United States)

    Tan, Y; Donovan, W P

    2001-11-17

    The aprA gene encoding alkaline protease A (AprA) was cloned from Bacillus thuringiensis subsp. kurstaki, and the cloned gene was used to construct aprA-deleted (aprA1) strains of B. thuringiensis. An aprA1 strain of B. thuringiensis that contained the wild-type gene for neutral protease A (nprA(+)) displayed levels of extracellular proteolytic activity that were similar to those of an aprA(+)nprA(+) strain. However, when EDTA was included in the protease assay to inhibit NprA activity the aprA1nprA(+) strain displayed only 2% of the extracellular proteolytic activity of the aprA(+)nprA(+) strain. A strain that was deleted for both aprA and nprA (aprA1nprA3 strain) failed to produce detectable levels of proteolytic activity either in the presence or absence of EDTA in the assay. Compared with the aprA(+)nprA(+) strain the aprA1nprA(+) strain yielded 10% more full-length Cry1Bb crystal protein and the aprA1nprA3 strain yielded 25% more full-length Cry1Bb protein. No significant differences were seen in the 50% lethal dose of Cry1Bb protein from aprA(+)nprA(+) and aprA1nprA3 strains against three species of lepidopteran insects. These results suggest that enhanced yield of certain crystal proteins can be obtained by deletion of the genes aprA and nprA which are the major extracellular proteases of B. thuringiensis.

  4. Transverse expansion in 197 Au + 197 Au collisions at RHIC

    International Nuclear Information System (INIS)

    Cheng, Y.; Liu, F.; Liu, K.; Schweda, K.; Xu, N.

    2003-01-01

    Using the RQMD model, transverse momentum distributions and particle ratios are studied for 197 Au + 197 Au collisions at √s NN = 200 GeV. In particular, they present results on the mean transverse momentum of charged pions, charged kaons, protons and anti-protons and compare with experimental measurements. They discuss an approach to study early partonic collectivity in high energy nuclear collisions

  5. Quantitative Safety Impact of Severe Accident Management Systems for EU-APR during Low Power Shutdown Operation

    International Nuclear Information System (INIS)

    Lee, Keunsung; Hwang, Do Hun; Chang, Hyun-bin

    2016-01-01

    In order to enlarge and to diversify the export market of APR1400, the EU-APR design was developed based on the APR1400 design to comply with the latest version of the European Utility Requirements (EUR) revision D. The EU-APR design has the distinguished and advanced severe accident management systems taken from the APR1400 to obtain a containment integrity for the beyond design basis accident, such as the Passive Ex-vessel retaining and Cooling System (PECS), the Severe Accident Containment Spray System (SACSS) and the Containment Filtered Vent System (CFVS). The risk associated with the nuclear power plant can be identified through the Probabilistic Safety Assessment (PSA). In the EUR chapter 1 and 17 of volume 2, the Criteria for Limited Impact (CLI) should be applied to the Level 2 PSA as a risk metrics. The fraction of exceeding CLI for the EU-APR during LPSD operation was calculated as 4.52% of the CDF under the condition that all severe accident management systems are credited. The PECS, SACSS and CFVS are considered as the severe accident management system which is EU-APR dedicated system. The exemption of each system leads to increase the fraction of exceeding CLI to 54.18%, 89.74% and 21.32% respectively. In case if all these systems are unavailable, the fraction of exceeding CLI is increased to 100%. The most effective system is the SACSS that the system reduces containment pressure and temperature

  6. Quantitative Safety Impact of Severe Accident Management Systems for EU-APR during Low Power Shutdown Operation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Keunsung; Hwang, Do Hun [KHNP CRI, Daejeon (Korea, Republic of); Chang, Hyun-bin [Future and Challenge Technology Co., Yongin (Korea, Republic of)

    2016-10-15

    In order to enlarge and to diversify the export market of APR1400, the EU-APR design was developed based on the APR1400 design to comply with the latest version of the European Utility Requirements (EUR) revision D. The EU-APR design has the distinguished and advanced severe accident management systems taken from the APR1400 to obtain a containment integrity for the beyond design basis accident, such as the Passive Ex-vessel retaining and Cooling System (PECS), the Severe Accident Containment Spray System (SACSS) and the Containment Filtered Vent System (CFVS). The risk associated with the nuclear power plant can be identified through the Probabilistic Safety Assessment (PSA). In the EUR chapter 1 and 17 of volume 2, the Criteria for Limited Impact (CLI) should be applied to the Level 2 PSA as a risk metrics. The fraction of exceeding CLI for the EU-APR during LPSD operation was calculated as 4.52% of the CDF under the condition that all severe accident management systems are credited. The PECS, SACSS and CFVS are considered as the severe accident management system which is EU-APR dedicated system. The exemption of each system leads to increase the fraction of exceeding CLI to 54.18%, 89.74% and 21.32% respectively. In case if all these systems are unavailable, the fraction of exceeding CLI is increased to 100%. The most effective system is the SACSS that the system reduces containment pressure and temperature.

  7. La métaplasie osteoide de l'endomètre après une grossesse à terme

    African Journals Online (AJOL)

    A travers notre cas et à la lumière d'une revue de la littérature nous insistons sur les caractéristiques épidémiologiques, physiopathologiques, cliniques et para cliniques de cette entité rare, dont la connaissance est primordiale pour un diagnostic sûr et par conséquent un traitement adapté permettant souvent de récupérer ...

  8. Pyélonéphrite Emphysémateuse Avec Une Issue Favorable Après ...

    African Journals Online (AJOL)

    28 août 2011 ... 1Service d'Urologie, 2Service de Radio Hôpital militaire Avicenne,. Marrakech, Maroc. RÉSUMÉ. Introduction: La pyélonéphrite emphysémateuse est une infection nécrotique du rein dont la sanction est le plus souvent radicale. Objectif: Notre propos est de montrer que le traitement conservateur pourrait ...

  9. The comparison between layout and design of APR1400 MCR and EPRI requirement

    International Nuclear Information System (INIS)

    Suharyo Widagdo; Darlis; Sigit Santoso; T J Suryono

    2013-01-01

    A good man-machine interface system is needed by a nuclear power reactor because of its complexity and high safety factor. The man-machine interface system is centralized in the main control room (MCR). All of monitoring and controlling activity to keep the installation operation safety can be done from this place. In order to increase its ability in monitoring and controlling a hard effort to raise the interface system to the highest possible level is done not only by using the latest computer technology and instrumentation system but also using Human Engineering, as well. The paper aims to compare the lay out and design the APR1400 MCR and the requirement from EPRI about main control room lay out and design as response of TMI-2 accident. We can see from the discussion that the design of the MCR of APR1400 have been applied the request of EPRI. (author)

  10. Calculation of fuel and moderator temperature coefficients in APR1400 nuclear reactor by MVP code

    International Nuclear Information System (INIS)

    Pham Tuan Nam; Le Thi Thu; Nguyen Huu Tiep; Tran Viet Phu

    2014-01-01

    In this project, these fuel and moderator temperature coefficients were calculated in APR1400 nuclear reactor by MVP code. APR1400 is an advanced water pressurized reactor, that was researched and developed by Korea Experts, its electric power is 1400 MW. The neutronics calculations of full core is very important to analysis and assess a reactor. Results of these calculation is input data for thermal-hydraulics calculations, such as fuel and moderator temperature coefficients. These factors describe the self-safety characteristics of nuclear reactor. After obtaining these reactivity parameters, they were used to re-run the thermal hydraulics calculations in LOCA and RIA accidents. These thermal-hydraulics results were used to analysis effects of reactor physics parameters to thermal hydraulics situation in nuclear reactors. (author)

  11. Improved Design of Crew Operation in Computerized Procedure System of APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Seong, No Kyu; Jung, Yeon Sub; Sung, Chan Ho [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    The operators perform the paper-based procedures in analog-based conventional main control room (MCR) depending on only communications between operators except a procedure controller such as a Shift Supervisor (SS), however in digital-based MCR the operators can confirm the procedures simultaneously in own console when the procedure controller of computerized procedure (CP) opens the CP. The synchronization and a synchronization function between procedure controller and other operators has to be considered to support the function of crew operation. This paper suggests the improved design of crew operation in computerized procedure system of APR1400. This paper suggests the improved design of APR1400 CPS. These improvements can help operators perform the crew procedures more efficiently. And they reduce a burden of communication and misunderstanding of computerized procedures. These improvements can be applied to CPS after human factors engineering verification and validation.

  12. Constrained model predictive control for load-following operation of APR reactors

    International Nuclear Information System (INIS)

    Kim, Jae Hwan; Lee, Sim Won; Kim, Ju Hyun; Na, Man Gyun; Yu, Keuk Jong; Kim, Han Gon

    2012-01-01

    The load-following operation of APR+ reactor is needed to control the power effectively using the control rods and to restrain the reactivity control from using the boric acid for flexibility of plant operation. Usually, the reason why the disproportion of axial flux distribution occurs during load-following operation is xenon-induced oscillation. The xenon has a very high absorption cross-section and makes the impact on the reactor delayed by the iodine precursor. The power maneuvering using automatically load-following operation has advantage in terms of safety and economic operation of the reactor, so the controller has to be designed efficiently. Therefore, an advanced control method that meets the conditions such as automatic control, flexibility, safety, and convenience is necessary to load-following operation of APR+ reactor. In this paper, the constrained model predictive control (MPC) method is applied to design APR reactor's automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control. Some controllers use only the current tracking command, but MPC considers future commands in addition to the current tracking command. So, MPC can achieve better tracking performance than others. Furthermore, an MPC is to used in many industrial process control systems. The basic concept of the MPC is to solve an optimization problem for a finite future time interval at present time and to implement the first optimal control input as the current control input. The KISPAC-1D code, which models the APR+ nuclear power plants, is interfaced to the proposed controller to verify the tracking performance of the reactor power level and ASI. It is known that the proposed controller exhibits very fast tracking responses

  13. The effect of nodalization and temperature of reactor upper region: Sensitivity analysis for APR-1400 LBLOCA

    International Nuclear Information System (INIS)

    Kang, Dong Gu

    2017-01-01

    Highlights: • The nodalization of APR-1400 was modified to reflect the characteristic of upper region temperature. • The effect of nodalization and temperature of reactor upper region on LBLOCA consequence was evaluated. • The modification of nodalization is an essential prerequisite in APR-1400 LBLOCA analysis. - Abstract: In best estimate (BE) calculation, the definition of system nodalization is important step influencing the prediction accuracy for specific thermal-hydraulic phenomena. The upper region of reactor is defined as the region of the upper guide structure (UGS) and upper dome. It has been assumed that the temperature of upper region is close to average temperature in most large break loss of coolant accident (LBLOCA) analysis cases. However, it was recently found that the temperature of upper region of APR-1400 reactor might be little lower than or similar to hot leg temperature through the review of detailed design data. In this study, the nodalization of APR-1400 was modified to reflect the characteristic of upper region temperature, and the effect of nodalization and temperature of reactor upper region on LBLOCA consequence was evaluated by sensitivity analysis including best estimate plus uncertainty (BEPU) calculation. In basecase calculation, in case of modified version, the peak cladding temperature (PCT) in blowdown phase became higher and the blowdown quenching (or cooling) was significantly deteriorated as compared to original case, and as a result, the cladding temperature in reflood phase became higher and the final quenching was also delayed. In addition, thermal-hydraulic parameters were compared and analyzed to investigate the effect of change of upper region on cladding temperature. In BEPU analysis, the 95 percentile PCT used in current regulatory practice was increased due to the modification of upper region nodalization, and it occurred in the reflood phase unlike original case.

  14. Structural assessments of plate type support system for APR1400 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Anh Tung; Namgung, Ihn, E-mail: inamgung@kings.ac.kr

    2017-04-01

    Highlights: • This paper investigates plate-type support structure for the reactor vessel of the APR 1400. • The tall column supports of APR1400 reactor challenges in seismic and severe accident events. • A plate-type support of reactor vessel was proposed and evaluated based on ASME code. • The plate-type support was assessed to show its higher rigidity than column-type. - Abstract: This paper investigates an alternative form of support structure for the reactor vessel of the APR 1400. The current reactor vessel adopts a four-column support arrangement locating on the cold legs of the vessel. Although having been successfully designed, the tall column structure challenges in seismic events. In addition, for the mitigation of severe accident consequences, the columns inhibit ex-vessel coolant flow, hence the elimination of the support columns proposes extra safety advantages. A plate-type support was proposed and evaluated for the adequacy of meeting the structural stiffness by Finite Element Analysis (FEA) approach. ASME Boiler and Pressure Vessel Code was used to verify the design. The results, which cover thermal and static structural analysis, show stresses are within allowable limits in accordance with the design code. Even the heat conduction area is increased for the plate-type of support system, the results showed that the thermal stresses are within allowable limits. A comparison of natural frequencies and mode shapes for column support and plate-type support were presented as well which showed higher fundamental frequencies for the plate-type support system resulting in greater rigidity of the support system. From the outcome of this research, the plate-type support is proven to be an alternative to current APR column type support design.

  15. Development of a Test Facility to Simulate the Reactor Flow Distribution of APR+

    International Nuclear Information System (INIS)

    Euh, D. J.; Cho, S.; Youn, Y. J.; Kim, J. T.; Kang, H. S.; Kwon, T. S.

    2011-01-01

    Recently a design of new reactor, APR+, is being developed, as an advanced type of APR1400. In order to analyze the thermal margin and hydraulic characteristics of APR+, quantification tests for flow and pressure distribution with a conservation of flow geometry are necessary. Hetsroni (1967) proposed four principal parameters for a hydraulic model representing a nuclear reactor prototype: geometry, relative roughness, Reynolds number, and Euler number. He concluded that the Euler number should be similar in the prototype and model under the preservation of the aspect ratio on the flow path. The effect of the Reynolds number at its higher values on the Euler number is rather small, since the dependency of the form and frictional loss coefficients on the Reynolds number is seen to be small. ABB-CE has carried out several reactor flow model test programs, mostly for its prototype reactors. A series of tests were conducted using a 3/16 scale reactor model. (see Lee et al., 2001). Lee et al (1991) performed experimental studies using a 1/5.03 scale reactor flow model of Yonggwang nuclear units 3 and 4. They showed that the measured data met the acceptance criteria and were suitable for their intended use in terms of performance and safety analyses. The design of current test facility was based on the conservation of Euler number which is a ratio of pressure drop to dynamic pressure with a sufficiently turbulent region having a high Reynolds number. By referring to the previous study, the APR+ design is linearly reduced to 1/5 ratio with a 1/2 of the velocity scale, which yields a 1/39.7 of Reynolds number scaling ratio. In the present study, the design feature of the facilities, named 'ACOP', in order to investigate flow and pressure distribution are described

  16. Critical heat flux for APR1400 lower head vessel during a severe accident

    International Nuclear Information System (INIS)

    Noh, Sang W.; Suh, Kune Y.

    2013-01-01

    Highlights: ► Studied boiling on downward-facing hemispherical vessel with asymmetric thermal insulator. ► Scaled the APR1400 lower head linearly down by 1/10 including ICI tubes and shear keys. ► Performed thermal analysis using ANSYS V11.0 to determine the internal temperature and heat flux. ► Performed tests to obtain the CHF with saturated demineralized water at atmospheric pressure. ► Measured CHF accounting for 3D random flow effect expected in the APR1400 application. -- Abstract: Corium Ablation Stopper Apparatus (CASA) has a downward-facing hemispherical vessel and geometrically asymmetric thermal insulator of the Advanced Power Reactor 1400 MWe (APR1400) scaled linearly down by 1/10, as well as sixty-one in-core instrumentation (ICI) tubes and four shear keys. The heated vessel plays a pivotal role in CASA depending on the configuration of the oxide pool and metal layer to bring about the focusing effect expected of a molten pool in the lower head during a severe accident. The heated vessel was designed through a trial-and-error method and thermal analysis. Thermal analysis was performed using ANSYS V11.0 to investigate the effect of the internal temperature and heat flux on the integral hemispherical copper vessel. The CASA tests were carried out to obtain the critical heat flux (CHF) with saturated and demineralized water at the atmospheric pressure (0.1 MPa). The CHF in the metal layer through the hemispherical channel was found to be lower than that in the ULPU-2400 configuration V data through the streamlined thermal insulator. The experimental CHF was measured and obtained through the CASA hemispherical heated surface accounting for the three-dimensional random flow effect expected in the APR1400 application

  17. The Gravity Makeup on the LORHR Event during Mid-loop Operation for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Woo; Lee, Yong Hee; Lee, Gyu Cheon; Kim, Shin Whan [KEPCO, Daejeon (Korea, Republic of)

    2015-05-15

    This paper is to investigate means of the available gravity makeup after the event to prevent or sustain the core uncovery and fuel failure for the typical advanced power reactor nuclear power plants (APR1400). Unlike the OPR1000 (optimized power reactor 1000 nuclear power plants), the refueling water storage tank of APR1400 cannot be used for gravity makeup since it is located on the bottom of the containment with a lower elevation than the reactor vessel. So, the other means of gravity makeup and their effect on the core uncovery are accounted. The use of the water used for the cask loading pit (CLP) during refueling or the safety injection line filling tank (SIFT), which are not designed for gravity makeup during the event, and safety injection tanks (SITs) are considered as the alternative source of makeup feed. The results show that gravity makeup of a SIT provides a sufficient operator action time for the LORHR with the station black out (SBO) during the mid-loop operation for the APR1400. From the LORHR event analysis, the effective means of gravity makeup for APR1400 to cope with this event concurrent loss of all AC power is determined as the gravity feed using SITs. Other means for gravity makeup using CLP or SIFT, which are not designed to mitigate the LORHR event, are evaluated as not effective to the event due to the large flow resistances and the low elevation head to overcome the system pressure increase during the LORHR. The use of one SIT and two SITs for the LORHR provides the core uncovery times as 3 hr 8 min and 4 hr 32 min extending 1 hr 15 min and 2 hr 38 min from the base case, respectively.

  18. Study on Applicability of 10 CFR Part 21 to APR1400 DC Project

    International Nuclear Information System (INIS)

    Shin, He Young; Lee, Do Hwan; Lim, Jae Yong

    2014-01-01

    The tools such as NCR (non conformance report), CAR (corrective action request) and CAP (corrective action program) are widely used for that purpose based upon the rule of 10 CFR Part 50 Appendix B and the ASME Code NQA-1 requirements. These are the tools for a utility, as a purchaser taking over related basic components and services, to ensure strong quality assurance. During the conduct of the project for the acquisition of the standard design certification for APR1400 nuclear power plants from the U. S. NRC (APR1400 DC Project), a new CAP procedure that is appropriate to conduct this unique project was developed. However, it was also recommended to comply with the requirements under 10 CFR Part 21 which enhances nuclear safety quality assurances. Consequently, a new QA procedure is developed in order to deal with the 10 CFR Part 21 issues and this is integrated to the CAP procedure In this paper, the current corrective action program for the APR1400 DC project is introduced and the result of the study on the applicability of 10 CFR Part 21 to the project is indicated. In addition, further improving aspects to be considered are identified. As a frontier project to obtain the standard design certification for APR 1400 model from the U. S. NRC, a modified CAP procedure is developed and enhanced to deal with safety concerning issues in accordance with 10 CFR Part 21. In addition, the newly established QA procedure to directly control the reportability on 10 CFR Part 21 is interfaced into the existing CAP procedure

  19. An Experimental Investigation on APR1400 Penetration Weld Failure by Metallic Melt

    International Nuclear Information System (INIS)

    An, Sang Mo; Ha, Kwang Soon; Kim, Hwan Yeol

    2014-01-01

    The penetrations are considered as the most vulnerable parts with respect to the reactor vessel failure when a core melt severe accident occurs and the corium reaches the lower head. Penetration tube failure modes can be divided into two categories; tube ejection out of the vessel lower head and rupture of the penetration tube outside the vessel. Tube ejection begins with degrading the penetration tube weld strength to zero as the weld is exposed to temperatures as high as the weld melting temperature, which is called weld failure, and then overcoming any binding force in the hole in the vessel wall that results from differential thermal expansion of the tube and vessel wall. Tube rupture assumes that the debris bed has melted the instrument tube inside the reactor and melt migrates down into the tube to a location outside the vessel wall where a pressure rupture can occur, thus breaching the pressure boundary. In the present paper, we have a focus on the tube ejection failure mode, specifically on the APR1400 weld failure by direct contact with a metallic melt. The objective is to investigate experimentally the ablation kinetics of an APR1400 penetration weld during the interactions with a metallic melt and to suggest the modification of the existing weld failure model. This paper involves the interaction experiments of two different metallic melts (metallic corium and stainless steel melts) with a weld specimen, and rough estimation of weld failure time. The interaction experiments between the metallic melts and an APR1400 penetration weld were performed to investigate the ablation kinetics of the penetration weld. Metallic corium and stainless steel melts were generated using an induction heating technique and interacted with a penetration weld specimen. The ablation rate of the weld specimen showed a range from 0.109 to 0..244 mm/s and thus the APR1400 penetration weld was estimated to be failed at hundreds of times after the interaction with the melt

  20. Evolution de la gonadotropine plasmatique t-GtH après synchronization des ovulations par injection de 17α hydroxy-20β dihydroprogesterone chez la truite arc-en-ciel (Salmo gairdneri R.) : Evolution of plasmatic gonadotropin t-gth after synchronization of ovulations by injection of 17-α hydroxy-20β dihydroprogesterone in rainbow-trout (Salmo gairdneri R.)

    OpenAIRE

    Jalabert, Bernard; Breton, Bernard; Bry, C.

    1980-01-01

    L'injection de 17α hydroxy-20 β dihydroprogestérone (3 mg/kg) à des femelles dont les ovocytes sont au stade de « vésicule germinative semi-périphérique » entraîne une chute du niveau de t-GtH, très hautement significative 24 h. après injection, qui résulte vraisemblablement d'une rétroaction négative sur la sécrétion hypophysaire. Par la suite, après ovulation, la t-GtH plasmatique s'élève davantage chez les femelles subissant la rétention des ovules (50 µg/ml environ) que chez les femelles ...

  1. Organization and methodology applied to the control of commissioning tests to guarantee safe operation of nuclear units; Organisation et methodologie appliquees au controle des essais de mise en service pour assurer la surete de fonctionnement des tranches electronucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Clausner, J P; Jorel, M

    1990-12-01

    This paper describes the activities of the Safety Analysis Department (DAS), which provides technical support for the French safety authorities in the specific context of analysis and control of startup test programme quality at each of the different stages of the programme. These activities combine to ensure that the objective of the startup tests is reached, in particular that the functions of each safety-related system are guaranteed in all operating configurations, that the performance levels of all components in the system comply with design criteria and that defects revealed during previous tests have been dealt with correctly. The special case of French nuclear facilities, linked to unit standardization, has made it possible to acquire a large amount of experience with the startup of the 900 MWe units and has illustrated the importance of defining a startup test programme. In 1981, a working group, comprising operating organization and safety authority representatives, studied the lessons which had to be learned from 900 MWe unit startup and the improvements which could be made and taken into account in the 1300 MWe unit startup programme. To illustrate the approach adopted by the DAS, we go on to describe the lessons learned from startup of the first 1300 MWe (P4) units. (author) [French] Au sein de l'Institut de Protection et de Surete Nucleaire (IPSN), le Departement d'Analyse de Surete (DAS) constitue le support technique du Service Central de Surete des Installations Nucleaires (SCSIN) qui est l'autorite de surete francaise. A ce titre, il evalue les programmes d'essais de demarrage et emet un avis sur le traitement des problemes survenus au cours des essais. Pour ce faire, le DAS assure l'analyse du programme d'essais depuis l'elaboration des documents jusqu'a la montee du reacteur a sa puissance nominale. L'evaluation du DAS commence par une analyse approfondie des programmes de principe d'essais (PPE) qui sont etablis par Electricite de France (EDF

  2. Seismic analysis of the APR1400 nuclear reactor system using a verified beam element model

    International Nuclear Information System (INIS)

    Park, Jong-beom; Park, No-Cheol; Lee, Sang-Jeong; Park, Young-Pil; Choi, Youngin

    2017-01-01

    Highlights: • A simplified beam element model is constructed based on the real dynamic characteristics of the APR1400. • Time history analysis is performed to calculate the seismic responses of the structures. • Large deformations can be observed at the in-phase mode of reactor vessel and core support barrel. - Abstract: Structural integrity is the first priority in the design of nuclear reactor internal structures. In particular, nuclear reactor internals should be designed to endure external forces, such as those due to earthquakes. Many researchers have performed finite element analyses to meet these design requirements. Generally, a seismic analysis model should reflect the dynamic characteristics of the target system. However, seismic analysis based on the finite element method requires long computation times as well as huge storage space. In this research, a beam element model was developed and confirmed based on the real dynamic characteristics of an advanced pressurized water nuclear reactor 1400 (APR1400) system. That verification process enhances the accuracy of the finite element analysis using the beam elements, remarkably. Also, the beam element model reduces seismic analysis costs. Therefore, the beam element model was used to perform the seismic analysis. Then, the safety of the APR1400 was assessed based on a seismic analysis of the time history responses of its structures. Thus, efficient, accurate seismic analysis was demonstrated using the proposed beam element model.

  3. Single-tube condensation experiment in Passive Auxiliary Feedwater System of APR1400+

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Chang Wook; No, Hee Cheon; Yun, Bong Yo; Jeon, Byong Guk [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2012-05-15

    Conventional Korean nuclear power plants, Advanced Power Reactors (APR), are characterized by an active cooling system. However, Active cooling system may not prevent significant damage without any AC power source available for its operation as vividly illustrated through the recent Fukushima incident. In the APR1400+ to be designed, an independent passive cooling system was added in order to overcome the aforementioned shortcomings. In the Passive Auxiliary Feedwater System (PAFS), gravity force and density difference between steam and water are used. The system comprises of 240 condensation tubes to efficiently remove decay heat. Before applying the PAFS to APR1400+, the system's safety and heat removal performance must be verified. The present study experimentally evaluates the heat removal performance of a single tube in the PAFS. The objectives of SCOP (Single-tube Condensation experiment facility of PAFS) are the evaluation of the heat removal performance in the tube of the PAFS and database construction under various tube designs and test conditions. Reaching these objectives, we developed advanced measurement techniques for the amount of moisture, heat flux, and water film thickness.

  4. The Alberta Pregnancy Outcomes and Nutrition (APrON) cohort study: rationale and methods.

    Science.gov (United States)

    Kaplan, Bonnie J; Giesbrecht, Gerald F; Leung, Brenda M Y; Field, Catherine J; Dewey, Deborah; Bell, Rhonda C; Manca, Donna P; O'Beirne, Maeve; Johnston, David W; Pop, Victor J; Singhal, Nalini; Gagnon, Lisa; Bernier, Francois P; Eliasziw, Misha; McCargar, Linda J; Kooistra, Libbe; Farmer, Anna; Cantell, Marja; Goonewardene, Laki; Casey, Linda M; Letourneau, Nicole; Martin, Jonathan W

    2014-01-01

    The Alberta Pregnancy Outcomes and Nutrition (APrON) study is an ongoing prospective cohort study that recruits pregnant women early in pregnancy and, as of 2012, is following up their infants to 3 years of age. It has currently enrolled approximately 5000 Canadians (2000 pregnant women, their offspring and many of their partners). The primary aims of the APrON study were to determine the relationships between maternal nutrient intake and status, before, during and after gestation, and (1) maternal mood; (2) birth and obstetric outcomes; and (3) infant neurodevelopment. We have collected comprehensive maternal nutrition, anthropometric, biological and mental health data at multiple points in the pregnancy and the post-partum period, as well as obstetrical, birth, health and neurodevelopmental outcomes of these pregnancies. The study continues to follow the infants through to 36 months of age. The current report describes the study design and methods, and findings of some pilot work. The APrON study is a significant resource with opportunities for collaboration. © 2012 John Wiley & Sons Ltd.

  5. Seismic analysis of the APR1400 nuclear reactor system using a verified beam element model

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jong-beom [Department of Mechanical Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722 (Korea, Republic of); Park, No-Cheol, E-mail: pnch@yonsei.ac.kr [Department of Mechanical Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722 (Korea, Republic of); Lee, Sang-Jeong; Park, Young-Pil [Department of Mechanical Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722 (Korea, Republic of); Choi, Youngin [Korea Institute of Nuclear Safety, 62 Gwahak-ro, Yuseong-gu, Daejeon 34142 (Korea, Republic of)

    2017-03-15

    Highlights: • A simplified beam element model is constructed based on the real dynamic characteristics of the APR1400. • Time history analysis is performed to calculate the seismic responses of the structures. • Large deformations can be observed at the in-phase mode of reactor vessel and core support barrel. - Abstract: Structural integrity is the first priority in the design of nuclear reactor internal structures. In particular, nuclear reactor internals should be designed to endure external forces, such as those due to earthquakes. Many researchers have performed finite element analyses to meet these design requirements. Generally, a seismic analysis model should reflect the dynamic characteristics of the target system. However, seismic analysis based on the finite element method requires long computation times as well as huge storage space. In this research, a beam element model was developed and confirmed based on the real dynamic characteristics of an advanced pressurized water nuclear reactor 1400 (APR1400) system. That verification process enhances the accuracy of the finite element analysis using the beam elements, remarkably. Also, the beam element model reduces seismic analysis costs. Therefore, the beam element model was used to perform the seismic analysis. Then, the safety of the APR1400 was assessed based on a seismic analysis of the time history responses of its structures. Thus, efficient, accurate seismic analysis was demonstrated using the proposed beam element model.

  6. Containment Performance Analysis with Large Break LOCA for EU-APR1400

    International Nuclear Information System (INIS)

    Hwang, Do Hyun; Lee, Keun Sung; Kim, Yong Soo

    2013-01-01

    In this paper for containment performance analysis, the containment pressurization analysis is performed and thermo-hydraulic response analysis of containment structure is carried out to provide basic understanding of containment transient states under a severe accident sequence. Especially, in EU-APR1400 design, to reduce containment pressure and temperature, Severe Accident Containment Spray System (SACSS) is designed to be actuated automatically when Core Exit Temperature (CET) reaches 922 K (649 .deg. C). The containment performance analysis was carried on LBLOCA sequence for EU-APR1400 with SACSS through MAAP code. If SACSS is actuated when CET reaches 922 K (649 .deg. C) , the containment pressure and temperature decrease to a sufficient low level. The predicted atmospheric pressure of containment will not exceed the ultimate pressure capacity (UPC) and have a sufficient margin to it even though the UPC of the reference plant (Shin-Kori Units 3 and 4) is used instead because the UPC calculation for EU-APR1400 has not been completed. The largest load on the containment by LBLOCA is estimated at 306.1 kPa. Thus the margin to UPC is estimated to be 330 % in comparison with 1.329 MPa as UPC for the reference plant.

  7. Assistant Personal Robot (APR: Conception and Application of a Tele-Operated Assisted Living Robot

    Directory of Open Access Journals (Sweden)

    Eduard Clotet

    2016-04-01

    Full Text Available This paper presents the technical description, mechanical design, electronic components, software implementation and possible applications of a tele-operated mobile robot designed as an assisted living tool. This robotic concept has been named Assistant Personal Robot (or APR for short and has been designed as a remotely telecontrolled robotic platform built to provide social and assistive services to elderly people and those with impaired mobility. The APR features a fast high-mobility motion system adapted for tele-operation in plain indoor areas, which incorporates a high-priority collision avoidance procedure. This paper presents the mechanical architecture, electrical fundaments and software implementation required in order to develop the main functionalities of an assistive robot. The APR uses a tablet in order to implement the basic peer-to-peer videoconference and tele-operation control combined with a tactile graphic user interface. The paper also presents the development of some applications proposed in the framework of an assisted living robot.

  8. Effect of the design change of the LSSBP on core flow distribution of APR+ Reactor

    International Nuclear Information System (INIS)

    Kim, Kihwan; Euh, Dong-Jin; Choi, Hae-Seob; Kwon, Tae-Soon

    2014-01-01

    The uniform core inlet flow distribution of an Advanced Power Reactor Plus (APR+) is required to prevent the failure rate of the HIPER fuel assembly and improve the core thermal margin. KEPCO-E and C and KAERI proposed a design change of the Lower Support Structure Bottom Plate (LSSBP), since the core flow rates were intense near the outer region of the intact LSSBP in a previous study. In this study, an experiment was carried out to evaluate the effect of the design change of the LSSBP on the core flow distribution using the APR+ Core Flow and Pressure (ACOP) test facility. The results showed great improvement on the core flow distribution under a 4-pump balanced flow condition. Under the 4-pump balanced flow condition, fifteen tests were repeated using the ACOP test facility to verify the effect of the 50% blocked flow area at the outer region of the LSSBP on the core inlet flow distribution. The profiles of the core inlet mass flow rates were analyzed using ensemble averaged values, and compared with that of the intact LSSBP. The results showed great improvement for the overall core region. The change in design of the LSSBP is expected to improve the hydraulic performance of an APR+ reactor

  9. Radiological Impacts Assessment during Normal Decommissioning Operation for EU-APR

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Do Hyun; Lee, Keun Sung [KHNP CRI, Daejeon (Korea, Republic of); Lee, ChongHui [KEPCO Engineering and Construction, Gimcheon (Korea, Republic of)

    2016-10-15

    In this paper, radiological impacts on human beings during normal execution of the decommissioning operations from the current standard design of EU-APR which has been modified and improved from its original design of APR1400 to comply with EUR, are evaluated. Decommissioning is the final phase in the life cycle of a nuclear installation, covering all activities from shutdown and removal of fissile material to environmental restoration of the site. According to article 5.4 specified in chapter 2.20 of European Utility Requirements (EUR), all relevant radiological impacts on human being should be considered during the environmental assessment of decommissioning, including external exposure from direct radiation of plant and other radiation sources, and internal exposure due to inhalation and ingestion. In this paper, radiological impacts on human beings during normal circumstances of the decommissioning operation were evaluated from the current standard design of EU-APR based on the simple transport model and practical generic methodology for assessing the radiological impact provided by IAEA. The results of dose assessment fulfilled the dose limit for all scenarios.

  10. Main steam line break accident simulation of APR1400 using the model of ATLAS facility

    Science.gov (United States)

    Ekariansyah, A. S.; Deswandri; Sunaryo, Geni R.

    2018-02-01

    A main steam line break simulation for APR1400 as an advanced design of PWR has been performed using the RELAP5 code. The simulation was conducted in a model of thermal-hydraulic test facility called as ATLAS, which represents a scaled down facility of the APR1400 design. The main steam line break event is described in a open-access safety report document, in which initial conditions and assumptionsfor the analysis were utilized in performing the simulation and analysis of the selected parameter. The objective of this work was to conduct a benchmark activities by comparing the simulation results of the CESEC-III code as a conservative approach code with the results of RELAP5 as a best-estimate code. Based on the simulation results, a general similarity in the behavior of selected parameters was observed between the two codes. However the degree of accuracy still needs further research an analysis by comparing with the other best-estimate code. Uncertainties arising from the ATLAS model should be minimized by taking into account much more specific data in developing the APR1400 model.

  11. Fabrication de transistors mono-electroniques en silicium pour le traitement classique et quantique de l'information: une approche nanodamascene

    Science.gov (United States)

    Harvey-Collard, Patrick

    Les transistors mono-electroniques (SETs) sont des dispositifs ayant un grand potentiel d'applications, comme la detection de charge ultra-sensible, la logique a basse consommation de puissance, la memoire ou la metrologie. De plus, la possibilite de pieger un seul electron et de manipuler son etat de spin pourrait permettre des applications en informatique quantique. Le silicium est un materiau interessant pour fabriquer l'ilot d'un SET. Son gap semi-conducteur permet le fonctionnement du dispositif dans le regime a un seul electron ou trou et pourrait permettre d'etendre la plage d'operation du SET en temperature en augmentant l'energie d'addition du diamant central de la valeur du gap. En outre, le silicium beneficie de plus de quarante annees d'expertise en microfabrication et d'une compatibilite avec la technologie metal--oxyde--semi-conducteur complementaire (CMOS). Cependant, la fabrication de ces dispositifs fait face a de serieuses limitations a cause de la taille nanometrique requise pour l'ilot. A ce jour, les procedes de fabrication proposes permettant l'operation a la temperature ambiante sont trop peu reproductibles pour permettre des applications a grande echelle. Dans ce memoire de maitrise, la fabrication de transistors mono-electroniques en silicium (Si-SETs) pour le traitement classique et quantique de l'information est realisee avec un procede nanodamascene. Le polissage chimico-mecanique (CMP) est introduit comme etape clef de la fabrication du transistor, permettant le controle au nanometre pres (nanodamascene) de l'epaisseur du transistor. Cet outil permet la fabrication de dispositifs ayant une geometrie auparavant impossible a realiser et ouvre la porte a l'innovation technologique. De plus, un procede de gravure du silicium par plasma a couplage inductif (ICP) est developpe pour permettre la fabrication de nanostructures de silicium sur une nanotopographie alliant le nano et le 3D. Les Si-SETs fabriques sont caracterises a basse

  12. 16 Élaboration et caractérisation des sources solides de diffusion ...

    African Journals Online (AJOL)

    master

    Un traitement thermique de séchage et de densification conduit ensuite au matériau désiré. Dans notre travail nous avons utilisé la technique de dépôt par rotation du substrat (spin coating) pour le dépôt des couches sur des substrats de silicium. Après le dépôt, un traitement thermique est réalisé afin d‟obtenir les ...

  13. Evaluation of Ablation rate by the change of Sacrificial Material for PECS in EU-APR

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Do Hyun; Kim, Yong Soo; Lee, Keun Sung [KHNP-CRI, Daejeon (Korea, Republic of)

    2015-05-15

    EU-APR, modified and improved from its original design of APR1400, has been developed to comply with European Utility Requirements (EUR) and nuclear design requirements of the European countries. In EU-APR, Severe Accident Mitigation Systems are dedicated to providing an independent defense line from that of Engineered Safety Feature (ESF) and Diverse Safety Feature (DSF). They consist of Emergency Reactor Depressurization System (ERDS), Passive Ex-vessel corium retaining and Cooling System (PECS), Severe Accident Containment Spray System (SACSS), Hydrogen Mitigation System (HMS) and Containment Filtered Vent System (CFVS). The PECS, so called core catcher, was introduced to prevent the Molten Core Concrete Interaction (MCCI) after Reactor Vessel (RV) failure. The PECS has experienced a lot of changes from its original design. Recently, the most significant change was that as a SM, limestone concrete is installed on PECS's body wall instead of previous sacrificial material rich in Fe{sub 2}O{sub 3}. The main reason of this design change is to overcome the issue that the sacrificial material is ablated rather too fast when reacting with corium that contains a large fraction of Zr metal. Other changes in the geometry of PECS's wall and downcomer design are considered as minor ones. In this paper, the comparison of ablation rates between previous SM and limestone concrete is carried out using MAAP5 code with respective MCCI model according to the material. In this paper, major improvements of MAAP5 model for PECS in EU-APR are presented and the evaluation of ablation rate for the previous SM model and the new LC model is carried out by means of ablation depths with LBLOCA sequence. Two models have respective unique ablation process. The ablation of LC model proceeds at a constant rate regardless of water while the ablation of SM model proceeds at a faster rate before the arrival of cooling water for corium and SM mixture. The change of sacrificial material

  14. Analytical Assessment of Environmental Impact for APR1400DC UHS Cooling Tower

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jaiho [KHNP-Central Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Hot process water is pumped from the plant process to the cooling towers. Heat is rejected through evaporation of the process water, interacting with ambient air blown upward by fans.. Plumes generated from exit ports of the cooling tower may have adverse effects on the environment, such as deposition of cooling tower drift release, fogging, icing, shadowing, and ground-level temperature and humidity increase. These kinds of environmental impact of the cooling tower are linked closely with the dispersion of the cooling tower plumes. In this respect, predicting the behavior of the plumes has become one of the most important issues in the environmental assessments of the cooling towers. The SACTI (seasonal/annual cooling tower impact) model is an analytical tool to predict the environmental effect of cooling tower, which was developed by Argonne National Laboratory and University of Illinois with support from EPRI (electric power research institute). The initial version of SACTI has been widely used to assess the environmental effect of cooling towers in many industrial fields such as steam power plants and NPPs. Guo et. al. investigated impact of heat rejection and cooling tower height on plume dispersion using the SACTI model, for the purpose of the future construction of inland NPPs. They found that increasing cooling tower height decreases the plume length and height frequencies. Their simulation results showed that the increase in heat rejection increases the plum radius frequency. The APR1400DC is an advanced light water reactor developed for the purpose of NRC-DC (design certification). The cooling towers for APR1400DC UHS consist of two linear mechanical draft cooling towers (LMDCTs). The LMDCT for APR1400DC UHS is conceptually designed because the plant site has not been decided yet. In the present study, the dependency of plume dispersion on the number of cooling towers is investigated using SACTI-2-beta, for predicting annual environmental effect of APR

  15. Evaluation of Ablation rate by the change of Sacrificial Material for PECS in EU-APR

    International Nuclear Information System (INIS)

    Hwang, Do Hyun; Kim, Yong Soo; Lee, Keun Sung

    2015-01-01

    EU-APR, modified and improved from its original design of APR1400, has been developed to comply with European Utility Requirements (EUR) and nuclear design requirements of the European countries. In EU-APR, Severe Accident Mitigation Systems are dedicated to providing an independent defense line from that of Engineered Safety Feature (ESF) and Diverse Safety Feature (DSF). They consist of Emergency Reactor Depressurization System (ERDS), Passive Ex-vessel corium retaining and Cooling System (PECS), Severe Accident Containment Spray System (SACSS), Hydrogen Mitigation System (HMS) and Containment Filtered Vent System (CFVS). The PECS, so called core catcher, was introduced to prevent the Molten Core Concrete Interaction (MCCI) after Reactor Vessel (RV) failure. The PECS has experienced a lot of changes from its original design. Recently, the most significant change was that as a SM, limestone concrete is installed on PECS's body wall instead of previous sacrificial material rich in Fe 2 O 3 . The main reason of this design change is to overcome the issue that the sacrificial material is ablated rather too fast when reacting with corium that contains a large fraction of Zr metal. Other changes in the geometry of PECS's wall and downcomer design are considered as minor ones. In this paper, the comparison of ablation rates between previous SM and limestone concrete is carried out using MAAP5 code with respective MCCI model according to the material. In this paper, major improvements of MAAP5 model for PECS in EU-APR are presented and the evaluation of ablation rate for the previous SM model and the new LC model is carried out by means of ablation depths with LBLOCA sequence. Two models have respective unique ablation process. The ablation of LC model proceeds at a constant rate regardless of water while the ablation of SM model proceeds at a faster rate before the arrival of cooling water for corium and SM mixture. The change of sacrificial material also

  16. Processing radioactive effluents with ion-exchanging resins: study of result extrapolation; Traitement des effluents radioactifs par resines echangeuses d'ions: etude de l'extrapolation des resultats

    Energy Technology Data Exchange (ETDEWEB)

    Wormser, G.

    1960-05-03

    As a previous study showed the ion-exchanging resins could be used in Saclay for the treatment of radioactive effluents, the author reports a study which aimed at investigating to which extent thus obtained results could be extrapolated to the case of higher industrial columns. The author reports experiments which aimed at determining extrapolation modes which could be used for columns of organic resin used for radioactive effluent decontamination. He notably studied whether the Hiester and Vermeulen extrapolation law could be applied. Experiments are performed at constant percolation flow rate, at varying flow rate, and at constant flow rate [French] Plusieurs etudes ont ete faites dans le but d'examiner les possibilites d'emploi des resines echangeuses d'ions pour le traitement des effluents radioactifs. Dans un rapport preliminaire, nous avons montre dans quelles limites un tel procede pouvait etre utilise au Centre d'Etudes Nucleaires de Saclay. Les essais ont ete effectues sur des petites colonnes de resine au laboratoire; il est apparu ensuite necessaire de prevoir dans quelle mesure les resultats ainsi obtenus peuvent etre extrapoles a des colonnes industrielles, de plus grande hauteur. Les experiences dont les resultats sont exposes dans ce rapport, ont pour but de determiner les modes d'extrapolation qui pourraient etre employes pour des colonnes de resine organique utilisees pour la decontamination d'effluents radioactifs. Nous avons en particulier recherche si la loi d'extrapolation de Hiester et Vermeulen qui donne de bons resultats dans le cas de fixation d'ions radioactifs en presence d'un ion macrocomposant sur des terres, pouvait etre appliquee. Les experiences, en nombre limite, ont montre que la loi d'extrapolation de Hiester et Vermeulen pouvait s'appliquer dans le cas de l'effluent considere quand les debits de percolation sont tres faibles; quand ils sont plus forts, les volumes de liquide percoles, a fixation egale, sont proportionnels aux

  17. A Source Term Calculation for the APR1400 NSSS Auxiliary System Components Using the Modified SHIELD Code

    International Nuclear Information System (INIS)

    Park, Hong Sik; Kim, Min; Park, Seong Chan; Seo, Jong Tae; Kim, Eun Kee

    2005-01-01

    The SHIELD code has been used to calculate the source terms of NSSS Auxiliary System (comprising CVCS, SIS, and SCS) components of the OPR1000. Because the code had been developed based upon the SYSTEM80 design and the APR1400 NSSS Auxiliary System design is considerably changed from that of SYSTEM80 or OPR1000, the SHIELD code cannot be used directly for APR1400 radiation design. Thus the hand-calculation is needed for the portion of design changes using the results of the SHIELD code calculation. In this study, the SHIELD code is modified to incorporate the APR1400 design changes and the source term calculation is performed for the APR1400 NSSS Auxiliary System components

  18. Insecticidal activity of the metalloprotease AprA occurs through suppression of host cellular and humoral immunity.

    Science.gov (United States)

    Lee, Seung Ah; Jang, Seong Han; Kim, Byung Hyun; Shibata, Toshio; Yoo, Jinwook; Jung, Yunjin; Kawabata, Shun-Ichiro; Lee, Bok Luel

    2018-04-01

    The biochemical characterization of virulence factors from entomopathogenic bacteria is important to understand entomopathogen-insect molecular interactions. Pseudomonas entomophila is a typical entomopathogenic bacterium that harbors virulence factors against several insects. However, the molecular actions of these factors against host innate immune responses are not clearly elucidated. In this study, we observed that bean bugs (Riptortus pedestris) that were injected with P. entomophila were highly susceptible to this bacterium. To determine how P. entomophila counteracts the host innate immunity to survive within the insect, we purified a highly enriched protein with potential host insect-killing activity from the culture supernatant of P. entomophila. Then, a 45-kDa protein was purified to homogeneity and identified as AprA which is an alkaline zinc metalloprotease of the genus Pseudomonas by liquid chromatography mass spectrometry (LC-MS). Purified AprA showed a pronounced killing effect against host insects and suppressed both host cellular and humoral innate immunity. Furthermore, to show that AprA is an important insecticidal protein of P. entomophila, we used an aprA-deficient P. entomophila mutant strain (ΔaprA). When ΔaprA mutant cells were injected to host insects, this mutant exhibited extremely attenuated virulence. In addition, the cytotoxicity against host hemocytes and the antimicrobial peptide-degrading ability of the ΔaprA mutant were greatly decreased. These findings suggest that AprA functions as an important insecticidal protein of P. entomophila via suppression of host cellular and humoral innate immune responses. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Evaluation of the Main Steam Line Break Accident for the APR+ Standard Design using MARS-KS

    Energy Technology Data Exchange (ETDEWEB)

    Park, M. H.; Kim, Y. S.; Hwang, Min Jeong; Sim, S. K. [Environment Energy Technology, Daejeon (Korea, Republic of); Bang, Young Seok [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2015-05-15

    As a part of licensing evaluation of the APR+ (Advanced Power Reactor +) standard design, Korea Institute of Nuclear Safety(KINS) performed safety evaluation of the APR+ Standard Safety Analysis Report(SSAR). The results of the safety evaluation of the APR+ Main Steam Line Break(MSLB) accident is presented for the most limiting post-trip return-to-power case with the single failure assumption of the Loss Of Offsite Power(LOOP). MARS-KS regulatory safety analysis code has been used to evaluate safety as well as the system behavior during MSLB accident. The MARS-KS analysis results are compared with the results of the MSLB safety analysis presented in the SSAR of the APR+. Independent safety evaluation has been performed using MARS-KS regulatory safety analysis code for the APR+ MSLB accident inside containment for the limiting case of the full power post-trip return-to-power. The results of MARS-KS analysis were compared with the results of the MSLB safety analysis presented in the APR+ SSAR. Due to higher cooldown of the MARS-KS analysis, the MARS-KS analysis results in a higher positive reactivity insertion into the core by the negative moderator and fuel temperature reactivity coefficients than the APR+ SSAR analysis. Both results show no return-to-power during the limiting case of the MSLB inside containment. However, APR+ SSAR moderator temperature reactivity insertion should be evaluated against the MARS-KS moderator density reactivity insertion for is conservatism. This study also clearly shows asymmetric thermal hydraulic behavior during the MSLB accident at intact and affected sides of the downcomer and the core. These asymmetric phenomena should be further investigated for the effects on the system design.

  20. Study of various decontamination processes for evaporation concentrates; Etude de differents traitements de decontamination sur des concentrats d'evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Lefillatre, G; Cudel, Y; Rodi, L [Commissariat a l' Energie Atomique, Chusclan (France). Centre de Production de Plutonium de Marcoule

    1968-07-01

    insolubiliser les radioelements contenus dans les concentrats avant leur enrobage eventuel par le bitume. Dans ce but, la fixation sur des produits mineraux, la precipitation sous forme de sels insolubles ou l'adsorption sur des coprecipites ont ete envisagees. Dans le cas de la fixation des radioelements par des produits mineraux d'origine naturelle ou synthetique a pouvoir absorbant eleve tels que: argiles, diatomees, silicates synthetiques et alumines, 48 produits ont ete experimentes. Leur efficacite selective vis-a-vis du {sup 137}Cs - {sup 90}Sr - {sup 106}Ru-Rh - {sup 144}Ce-Pr - {sup 95}Zr-Nb a ete determinee d'une part sur des concentrats acides, d'autre part sur des concentrate neutralises (precipitation des hydroxydes). Dans le cas de la fixation des radioelements a l'etat de sels insolubles ou de leur adsorption sur des coprecipites, le choix des traitements a porte sur les 2 radioelements les plus dangereux: {sup 137}Cs - {sup 90}Sr. Les traitements classiques ont ete experimentes. Pour le {sup 90}Sr: carbonate de calcium, oxalate de calcium, phosphate de calcium, phosphate de strontium, oxydes de manganese, sulfate de baryum. Pour le {sup 137}Cs: les ferrocyanures de nickel, de cuivre, de zinc, de cobalt, de manganese. La technique a consiste a effectuer les precipitations (hydroxydes, traitements specifiques du {sup 90}Sr et {sup 137}Cs) les unes a la suite des autres sans separer les precipites. (auteurs)

  1. Investigation of the diffusion {proportional_to} brasses using methods depending on the evaporation or condensation of zinc; Etude de la diffusion dans les laitons {proportional_to} au moyen des methodes d'evaporation ou de condensation du zinc

    Energy Technology Data Exchange (ETDEWEB)

    Accary, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires; Centre d' Etudes de Chimie Metallurgique du CNRS (France)

    1959-07-01

    Diffusion in {alpha} brasses has been investigated using methods involving the evaporation and the condensation of zinc. Having shown that at sufficiently high temperatures intergranular diffusion has no effect, it was then proved that the rate of evaporation or of condensation can only be defined if the mechanical treatment of the test piece before diffusion, the direction of the diffusion and the nature of the impurities present are also defined. The coefficient of diffusion D is then given by the equation D ({pi}/4t){rho}{sup 2}{sub 0} where t is the duration of the diffusion; {rho}{sub 0} is the extrapolated value of {rho} = ({delta}m)/({delta}C) for a zero value of the variation of concentration ({delta}m in is the change in weight of the test piece per unit surface; {delta}C is the difference between the concentration at the surface and the initial concentration of the test piece). This method has been used to study the effect of the direction of the diffusion on the coefficient of diffusion. The coefficient for diffusion which decreases the concentration of zinc is 5 times greater than that for diffusion which increases the quantity of zinc in the metal; an interpretation of this phenomena based on the mechanism of diffusion vacancies in the structure has been proposed. By means of micrographic investigation and by weighing it has been shown that the presence of certain impurities, such as phosphorous, arsenic, antimony, silicon, and aluminium can result in a marked increase of the rate of diffusion: the effect of these impurities on the coefficient of diffusion has been related to their valency and atomic weight. (author) [French] La diffusion dans les laitons {alpha} a ete etudiee au moyen des methodes d'evaporation et de condensafion du zinc. Apres avoir montre qu'aux temperatures suffisamment elevees, la diffusion intergranulaire ne jouait aucun role, l'auteur a prouve que la vitesse d'evaporation ou de condensation n'est definie que dans la mesure ou

  2. Contribution to the study of the sintering of ex-carbonyl iron in the {alpha} and {gamma} phases using the micro-fractographic technique; Contribution a l'etude du frittage du fer ex-carbonyle en phases {alpha} et {gamma} par examen des surfaces de rupture au microscope electronique

    Energy Technology Data Exchange (ETDEWEB)

    Oxley Gaborit de Montjou, M.Th. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1966-07-01

    granules a l'interieur des grains {alpha} finaux dans le fer directement fritte dans le bas du domaine {gamma}, meme apres plusieurs heures de frittage; -) une compression intermediaire permet une reprise du frittage suffisante pour depasser le stade de la structure a granules; -) un net ralentissement du frittage si le point A{sub 3} est franchi une ou plusieurs fois au cours du frittage en {alpha}; -) une cinetique du frittage elevee si le traitement en {gamma} est effectue a 1300 C ou au-dessus de 1300 C. Les resultats de cette etude sont en accord avec les observations micrographiques ainsi qu'avec les mesures dilatometriques et les valeurs connues des coefficients d'autodiffusion.

  3. L’apprentissage au cern

    CERN Multimedia

    2007-01-01

    pour les professions d’électronicien(ne) et de laborantin(e) en physique L’apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le canton de Genève. En cas de réussite à l’examen de fin d’apprentissage, les apprentis obtiennent le Certificat fédéral de capacité suisse (CFC). 6 places au total sont ouvertes au recrutement pour les deux professions. L’apprentissage dure 4 ans. Minima requis pour faire acte de candidature : avoir au moins 15 ans et moins de 21 ans à la date de début de l’apprentissage ; avoir terminé la scolarité obligatoire, au minimum 9e du Cycle d’orientation genevois (3e en France) ; être ressortissant d’un pays membre du CERN (Allemagne, Autriche, Belgique, Bulgarie, Danemark, Espagne, Finlande, France, Grèce, Hongrie, Italie, Norvège, Pays-Bas, Pologne, Portugal, Royaume-Uni, République tchèque, République slovaque , Suède, Suisse) ; pour les résidents en Suisse : être ressortissant su...

  4. Transverse velocity scaling in 197Au+197Au fragmentation

    International Nuclear Information System (INIS)

    Lukasik, J.; Hudan, S.; Lavaud, F.

    2002-07-01

    Invariant transverse-velocity spectra of intermediate-mass fragments were measured with the 4π multi-detector system INDRA for collisions of 197 Au on 197 Au at incident energies between 40 and 150 MeV per nucleon. Their scaling properties as a function of incident energy and atomic number Z are used to distinguish and characterize the emissions in (i) peripheral collisions at the projectile and target rapidities, and in (ii) central and (iii) peripheral collisions near mid-rapidity. The importance of dynamical effects is evident in all three cases and their origin is discussed. (orig.)

  5. Flow in Au+Au collisions at RHIC

    Science.gov (United States)

    Belt Tonjes, Marguerite; the PHOBOS Collaboration; Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Skulski, W.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tang, J.-L.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Verdier, R.; Wolfs, F. L. H.; Wosiek, B.; Wozniak, K.; Wuosmaa, A. H.; Wysłouch, B.

    2004-08-01

    The study of flow can provide information on the initial state dynamics and the degree of equilibration attained in heavy-ion collisions. This contribution presents results for both elliptic and directed flow as determined from data recorded by the PHOBOS experiment in Au+Au runs at RHIC at \\sqrt{sNN} = 19.6, 130 and 200 GeV. The PHOBOS detector provides a unique coverage in pseudorapidity for measuring flow at RHIC. The systematic dependence of flow on pseudorapidity, transverse momentum, centrality and energy is discussed.

  6. After Arizona: Military Musicians in the Second World War Après Arizona: les musiciens dans la marine américaine pendant la Seconde Guerre mondiale

    Directory of Open Access Journals (Sweden)

    Rosemary Peters

    2012-03-01

    Full Text Available Cet article traite du rôle des musiciens dans la marine américaine pendant la Seconde Guerre mondiale. L’histoire de l’USS Arizona — et de son orchestre, noyé avec le cuirassé lors de l’attaque surprise des forces japonaises — étant bien connue, je m’appuie sur cet exemple comme point de départ afin de contextualiser la situation des musiciens militaires après les événements de Pearl Harbor, en décembre 1941. Dans le sillage de ce grand moment de l’Histoire, j’évoque ici des histoires à une autre échelle, celle de la « micro-histoire »— celle d’un militaire seul au milieu d’autres militaires. À travers les lettres échangées entre des recrues ayant suivi ensemble la même formation, je trace ici leurs expériences de guerre en tant qu’artistes, ainsi que les divers conflits pratiques et idéologiques qui se manifestent dans la tension entre l’art musical et l’art martial.

  7. Rapid Estimation of Fast-Neutron Doses following Radiation Exposure in Criticality Accidents: The S{sup 32}(n, p)P{sup 32} Reaction in Body Hair; Prompte Evaluation des Doses de Neutrons Rapides apres une Exposition au Rayonnement a la Suite d'Accidents de Criticite: Reaction {sup 32}S(n, p){sup 32}P dans le Systeme Pileux; 0411 042b 0421 0414 ; Evaluacion Acelerada de Dosis de Neutrones Rapidos Despues de una Irradiacion Consecutiva a un Accidente de Criticidad: La Reaccion {sup 32}S(n, p){sup 32}P en el Pelo

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, D. F. [Los Alamos Scientific Laboratory, University of California, Los Alamos, NM (United States)

    1965-06-15

    information for comparison with average total-body neutron exposure estimates based on blood Na{sup 24} measurements. Fission yield estimates based on deduced geometries in each case were in good agreement with independent determinations of total fissions by more conventional analytical procedures. For rapid approximations of fast neutron dose, P{sup 32} activity in dpm/g hair at T = 0 from any counting system of known efficiency is simply multiplied by 0.49 to obtain ''sulphur-level'' neutron dose in rads. (author) [French] Etant donne sa composition chimique constante, sa situation anatomique fixe et sa facilite de prelevement, le systeme pileux de l'homme offre un materiau de choix permettant d'evaluer en peu de temps des doses de neutrons rapides recues par le personnel implique dans des accidents de criticite. La teneur en soufre du cheveu ou du poil est remarquablement constante, independente du sexe, de la couleur ou de la region ou il pousse; comme cette teneur est de 0,048 {+-} 0,005 g au gramme, on peut prendre le chiffre de 5% pour les estimations preliminaires de dose, sans avoir a proceder chaque fois a un dosage individuel du soufre. En l'absence d'une contamination externe facile a eliminer, le cheveu ou le poil contient moins de 0,025% de phosphore; etant donne que les sections efficaces d'activation du soufre et du phosphore sont semblables, l'absence virtuelle de phosphore permet d'utiliser le soufre du cheveu ou du poil comme un detecteur biologique a seuil pour la mesure du flux de neutrons de 2,5 MeV et plus, en appliquant la reaction {sup 32}S(n, p){sup 32}P. On a mis au point des methodes d'isolement rapide de {sup 32}P radiochimiquement pur pour permettre des estimations a des fins cliniques de l'exposition aux neutrons rapides des victimes des accidents de criticite. En l'absence d'une forte contamination par les produits de fission, on peut proceder aux evaluations dans les deux heures. Le procede plus complet qui comporte l'elimination des produits

  8. Réutilisation d'argiles très plastiques (A4) en remblai : Suivi du comportement après trois ans de réalisation

    OpenAIRE

    BERCHE, Véronique; ROBERT, Nicolas; BOUSSAFIR, Yasmina; FERBER, Valéry

    2013-01-01

    Cet article présente la réalisation de remblais en argile très plastiques en 2003 sur l'A34 dans les Ardennes (France) ainsi que les résultats du suivi du comportement de ces remblais dans le temps. Après un bref rappel des conditions de réalisation de ces remblais, un résumé des résultats de portance et de densité à court et moyen terme sera exposé. Dans un deuxième temps, des résultats de densité (double sonde Gamma et passage au banc Gamma) et essais Dynaplaque réalisés en 2006 seront c...

  9. Mise au point d'un pilote micro-ondes multifonction en vue d'un séchage d'algues alimentaires

    OpenAIRE

    Mikula, Stéphane

    1992-01-01

    Le séchage ou dessiccation consiste à évacuer l'eau d'un matériau humide vers le milieu ambiant dans le but d'en assurer la stabilité. Actuellement, le séchage à l'air chaud est le mode de déshydratation le plus employé dans le monde pour le traitement des denrées alimentaires. Cependant, cette technique présente quelques inconvénients. Au cours du séchage, il se produit généralement un gradient de déshydratation aboutissant à un dessèchement superficiel caractérisé par un croûtage et u...

  10. Chiral magnetic effect search in p+Au, d+Au and Au+Au collisions at RHIC

    Science.gov (United States)

    Zhao, Jie

    2018-01-01

    Metastable domains of fluctuating topological charges can change the chirality of quarks and induce local parity violation in quantum chromodynamics. This can lead to observable charge separation along the direction of the strong magnetic field produced by spectator protons in relativistic heavy-ion collisions, a phenomenon called the chiral magnetic effect (CME). A major background source for CME measurements using the charge-dependent azimuthal correlator (Δϒ) is the intrinsic particle correlations (such as resonance decays) coupled with the azimuthal elliptical anisotropy (v2). In heavy-ion collisions, the magnetic field direction and event plane angle are correlated, thus the CME and the v2-induced background are entangled. In this report, we present two studies from STAR to shed further lights on the background issue. (1) The Δϒ should be all background in small system p+Au and d+Au collisions, because the event plane angles are dominated by geometry fluctuations uncorrelated to the magnetic field direction. However, significant Δϒ is observed, comparable to the peripheral Au+Au data, suggesting a background dominance in the latter, and likely also in the mid-central Au+Au collisions where the multiplicity and v2 scaled correlator is similar. (2) A new approach is devised to study Δϒ as a function of the particle pair invariant mass (minv) to identify the resonance backgrounds and hence to extract the possible CME signal. Signal is consistent with zero within uncertainties at high minv. Signal at low minv, extracted from a two-component model assuming smooth mass dependence, is consistent with zero within uncertainties.

  11. APR1400 Electrical Power System Conformance to SECY-91-078

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Che-Wung; Kim, Yun-Ho [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    In this paper, the APR1400 electric power system for NRC-DC was described. In addition, the conformance to SECY 91-078 was evaluated. Enclosure 1 of the SECY provides an overview of the issue and states that the staff concludes that feeding the safety buses from the offsite power sources through non-safety buses or from a common transformer winding with non-safety loads is not the most reliable configuration. Such an arrangement increases the difficulty in properly regulating voltage at the safety buses, subjects the safety loads to transients caused by the non-safety loads, and adds additional failure points between the offsite power sources and safety loads. Therefore, it is the staff’s position that at least one offsite circuit to each redundant safety division should be supplied directly from one of the offsite power sources with no intervening non-safety buses, in such a manner that the offsite source can power the safety buses upon a failure of any non-safety bus. The APR1400 does not have an intervening nonsafety bus in the current offsite to onsite electrical configuration; however, the design does include nonsafety and safety buses coming from the same secondary side 4.16 kV transformer winding. Nevertheless, the APR1400 has designed the electrical interface system between offsite and onsite power with enhanced reliability measures to ensure that the nonsafety system will not impact the safety loads. The design complies with GDC 17 and also conforms to SECY-91-078.

  12. Development of phenomena identification and ranking table for APR1400 main steam line break

    International Nuclear Information System (INIS)

    Song, J. H.; Chung, B. D.; Jeong, J. J.

    2003-01-01

    A Phenomena Identification and Ranking Table (PIRT) was developed for the Main Steam Line Break (MSLB) event of an APR-1400 (Advanced Power Reactor-1400). A team of experts from research institutes, industries, and regulatory bodies participated in the development. The selected event was a double-ended steam line break at full power with the reactor coolant pump running. The panel selected the fuel performance as the primary safety criterion for ranking. The plant design data, the results of APR-1400 safety analysis, and the results of additional best estimate analysis by MARS2.1 were utilized. Three phases of pre-trip, rapid cool-down, and safety injection phase were identified. Then, the ranking of a system, components, phenomenon/process based on the relative importance to the primary evaluation criterion were followed for each time phase. Finally, the knowledge-level for each important process in the component was ranked in terms of the existing knowledge. The highly ranked phenomena identified for APR-1400 MSLB are tube wall heat transfer at the steam generator shell, void distribution at the steam generator shell, liquid entrainment in the separators, mixture level in the separators, boron mixing in the upper down comer, boron transport and thermal mixing in the lower plenum, stored energy release in the upper head, and flow to and/from the upper head. The PIRT will be used as a guide in planning cost effective experimental programs and code development efforts, especially for the quantification of the process and/or phenomena, which have a high importance but low knowledge level

  13. Filipino au pairs on the move

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2016-01-01

    Most Filipina au pairs in Denmark send remittances back home, and for many, au pairing forms part of longer-term migration trajectories. This article explores how Filipina au pairs try to carve out a future for themselves abroad. It shows that they navigate within tight webs of financial interdep......Most Filipina au pairs in Denmark send remittances back home, and for many, au pairing forms part of longer-term migration trajectories. This article explores how Filipina au pairs try to carve out a future for themselves abroad. It shows that they navigate within tight webs of financial...

  14. Level lifetimes of Au52+ in Au plasma

    International Nuclear Information System (INIS)

    Liu Bo; Zhu Zhiyan; Jiang Gang; Zhu Zhenghe

    2003-01-01

    Based on the extended relativistic multiconfiguration Dirac-Fock theory, the level lifetimes, level widths and wavelengths of Au 52+ have been calculated using the General-purpose Relativistic Atomic Structure Program. The wavelengths obtained are in good agreement with the experimental data available. The relationship between the level lifetimes and the level widths satisfies the Heisenberg uncertainty principle

  15. Devenir des micropolluants prioritaires et émergents dans les filières conventionnelles de traitement des eaux résiduaires urbaines des grosses collectivités (files eau et boues), et au cours du traitement tertiaire au charbon actif

    OpenAIRE

    Mailler , Romain

    2015-01-01

    This PhD was performed within the OPUR (Observatory of URban Pollution) research program, in collaboration with the Research and Development Department of the Parisian public sanitation service (SIAAP). This work deals with the removal of priority and emerging micropollutants by the conventional wastewater treatments, as well as tertiary treatment by activated carbon. A part of this work is also dedicated to the sludge contamination by priority and emerging substances and their fate during sl...

  16. Chemical treatment proceed of poor uranium content ores; Un procede de traitement chimique des minerais pauvres d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Mouret, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Pagny, P [Societe Potasse et Engrais Chimiques (France)

    1955-07-01

    The needs in uranium constantly increased inciting to develop new chemical processes for the treatment of uranium ores. we searched processes that permit to get this element from ores poor in uranium, to a reasonable cost price. We used a sulphuric attack and a precipitation of uranium as phosphate uranate or pyrophosphate uranate to separate its from the different impurities. The process permitted to process ores contents of about 0,05% of uranium and to get an end product of sodium carbonate uranate containing 60 to 65% of uranium, with an acceptable cost price and an extraction yield situated between 90 and 95%. (M.B.) [French] Les besoins sans cesse accrus en uranium ont incite de developper de nouveaux procedes chimiques pour le traitement de minerais uranifere. nous avons recherche des procedes qui permettent d'obtenir cet element a partir de minerais pauvres en uranium, a un prix de revient raisonnable. Nous nous sommes orientes vers une attaque sulfurique et une precipitation de l'uranium sous forme de phosphate uraneux ou de pyrophosphate uraneux pour le separer des differentes impuretes. Le procede a permis de descendre a des teneurs en uranium de l'ordre de 0,05 % et d'obtenir un produit final a l'etat d'uranate de soude contenant 60 e 65 % d'uranium, avec un prix de revient acceptable et avec un rendement global d'extraction situe entre 90 et 95 %. (M.B.)

  17. Two cases of physical treatment of uranium ore; Deux cas de traitement physique de minerai d'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Ginocchio, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    Until now, all uranium deposits exploited in France are vein type and present a very big variety of mineralization and structure. The process of concentration of these ores requires a study for each of them and, in a lot of cases, only the chemical attack can solve the problem. However, the flotation succeeded to results permitting a very interesting enrichment with lower investments expenses and cost prices. Enrichment by flotation would be foreseeable for poor layers and weak tonnage, permitting to absorb facilities on tonnages three times less important than the acidic treatment, or, to equality of cost price, to treat ores having contents of 2,5 to 4 times weaker. (M.B.) [French] Jusqu'ici, tous les gisements uraniferes exploites en France sont du type filonien et presentent une tres grande variete de mineralisation et de structure. Le procede de concentration de ces minerais necessite une etude pour chacun d'eux et, dans bien des cas, seule l'attaque chimique peut resoudre le probleme. Toutefois, la flottation a abouti a des resultats permettant un enrichissement tres interessant avec les depenses d'investissements et des prix de revient beaucoup plus bas. Un enrichissement par flottation serait envisageable pour des gisements pauvres et de faible tonnage, permettant d'amortir les installations sur des tonnages trois fois moins importants que le traitement acide, ou encore, a egalite de prix de revient, de traiter des minerais ayant des teneurs de 2,5 a 4 fois plus faibles. (M.B.)

  18. Dépérissement des manguiers et citrus dans la région centrale du ...

    African Journals Online (AJOL)

    SARAH

    30 nov. 2017 ... l'inoculer avec le champignon avant d'asperger les colonies de champignon en développement après deux jours d'incubation avec une suspension aqueuse des fongicides testés à la dose recommandée et selon le mode d'emploi du fabricant. Le troisième traitement consistait au témoin 1 c'est-à-dire que ...

  19. H:\\PMKER 25(3)\\BEUGRE F..xps

    African Journals Online (AJOL)

    AISA

    nodules and permitted the application of the herbicide, better development of soybean plants. Herbicide ... négative sur les micro-organismes du sol, en particulier, sur les .... différences significatives entre les traitements sont apparus à partir de 45e jour après le semis. (JAS), et ce, jusqu'au 90e JAS. En effet, pendant ...

  20. sommaire N°13

    African Journals Online (AJOL)

    Le traitement de cette tumeur bénigne et agressive n'est pas bien codifié. il fait recours essentiellement à la chi- rurgie. Nous rapportons une observation d'un FNP avec exten- sion au niveau de la fosse infratemporale traité par chi- rurgie après embolisation et discutons les autres moyens thérapeutiques. oBSERVAtIoN.

  1. Pratique de la science sociale au maghreb: l'approche intercontextuelle de la modernité

    Directory of Open Access Journals (Sweden)

    Z. Samandi

    2002-12-01

    Full Text Available L'étude pose le problème du statut scientifique de la pratique du chercheur en science sociale dans les contextes non producteurs de savoir. Comment opérer avec des formes de savoir produites ailleurs? Telle est la question que nous avons essayé de décrypter à travers les débats développés, d'une part par les sociologues arabes et, d'autre part l'approche mise en œuvre par Arkoun, Djaït et El Jabri dans leur analyse des réalités arabo-musulmanes. Le traitement de la raison tel qu'il se donne à voir à travers les démarches examinées met au jour la pertinence de la médiation contextuelle qui ne peut se réduire à un simple transfert des outils d'analyse. L'intercontextualité comme pratique est de la sorte induite par le travers de décontextualisation-recontextualisation opéré à l'intérieur du champ de la recherche. Elle est inscrite en creux dans l'exercice d'analyse et se présente à la fois comme dimension épistémologique et herméneutique.

  2. Quoi de neuf au Jardin d’enfants ?

    CERN Multimedia

    Staff Association

    2016-01-01

    Interview de Carole Dargagnon En septembre 2015, une nouvelle Directrice a été recrutée à l’Espace de Vie Enfantine et École de l’Association du personnel du CERN (EVE et École). En effet, après 18 années au poste de Directrice, Brigitte Pillionnel va prendre une retraite bien méritée. Ainsi, c’est Carole Dargagnon qui la remplacera dès la rentrée scolaire 2016-2017. L’Association du personnel est allée à sa rencontre.   1. Bonjour Carole, pouvez-vous nous parler de vous en quelques lignes ? Parisienne d’origine, je suis venue m’installer à Annecy en 2003. Ma carrière professionnelle a toujours été tournée vers le secteur de la petite enfance depuis 1994, date de l’obtention de mon diplôme d'&...

  3. La course au logement social

    OpenAIRE

    Bourgeois, Marine

    2013-01-01

    Ce billet a été publié dans le cadre de l'opération Têtes Chercheuses, qui permet à des étudiants ou chercheurs de grandes écoles, d'universités ou de centres de recherche partenaires de promouvoir des projets innovants en les rendant accessibles, et ainsi participer au débat public.

  4. Cloned Bacillus subtilis alkaline protease (aprA) gene showing high level of keratinolytic activity.

    Science.gov (United States)

    Zaghloul, T I

    1998-01-01

    The Bacillus subtilis alkaline protease(aprA) gene was previously cloned on a pUBHO-derivative plasmid. High levels of expression and gene stability were demonstrated when B. subtilis cells were grown on the laboratory medium 2XSG. B. subtilis cells harboring the multicopy aprA gene were grown on basal medium, supplemented with 1 % chicken feather as a source of energy, carbon, and nitrogen. Proteolytic and keratinolytic activities were monitored throughout the cultivation time. A high level of keratinolytic activity was obtained, and this indicates that alkaline protease is acting as a keratinase. Furthermore, considerable amounts of soluble proteins and free amino acids were obtained as a result of the enzymatic hydrolysis of feather. Biodegradation of feather waste using these cells represents an alternative way to improve the nutritional value of feather, since feather waste is currently utilized on a limited basis as a dietary protein supplement for animal feedstuffs. Moreover, the release of free amino acids from feather and the secreted keratinase enzyme would promote industries based on feather waste.

  5. Extended Station Blackout Analyses of an APR1400 with MARS-KS

    International Nuclear Information System (INIS)

    Kim, WoongBae; Jang, HyungWook; Oh, Seungjong; Lee, Sangyong

    2016-01-01

    The Fukushima Dai-ichi nuclear power plant accident shows that natural disasters such as earthquakes and the subsequent tsunamis can cause station blackout for several days. The electricity required for essential systems during a station blackout is provided from the emergency backup batteries installed at the nuclear power plant. In South Korea, in the event of an extended station blackout, the life of these emergency backup batteries has recently been extended from 8 hours to 24 hours at Shin-Kori 5, 6 and APR1400 for design certification. For a battery life of 24 hours, available safety means system, equipment and procedures are studied and analyzed in their ability to cope with an extended station blackout. A sensitivity study of reactor coolant pump seal leakage is performed to verify how different seal leakages could affect the system. For simulating of extended station blackout scenarios, the best estimate MARS-KS was used. In this paper, an APR1400 RELAP5 input deck was developed for station blackout scenario to analyze operation strategy by manually depressurizing the reactor coolant system through the steam generator's secondary side. Additionally, a sensitivity study was performed on reactor coolant pump seal leakage

  6. PLUS 7TM advanced fuel assembly development program for KSNPs and APR1400

    International Nuclear Information System (INIS)

    Kim, Kyutae; Stucker, David L.

    2002-01-01

    KNFC and Westinghouse have recently completed the development of the PLUS 7 TM advanced 16 X 16 fuel assembly for the Korean Standard Nuclear Plants (KSNPs) and the Advanced Power Reactor 1400 (APR 1400). This fuel design utilized the proven advanced design features including mixing vane spacer grids to increase critical heat flux performance, ZIRLO TM advanced materials to enable high-duty, high burnup fuel management and an optimized fuel rod diameter which improves fuel cycle cost while resulting in significant standardization of Korean fuel manufacture. PLUS 7 TM , also includes a patented spacer grid design with conformal fuel rod support designed to provide superior fuel rod wear/fretting resistance while minimizing pressure drop. This paper will present an overview of the PLUS 7 TM fuel assembly development process including a summary of the three-year design and testing program from a mechanical, neutronic, and thermal/hydraulic perspective. The PLUS 7 TM fuel for the KSNPs and the APR1400 reactors results in multi-million dollar per cycle savings in imported enriched uranium product for the Korean nuclear power program with technology specifically developed for Korea by experienced Korean engineers

  7. Analysis of a 12-Finger Rod Drop using RETRAN/MASTER Code System for APR1400

    International Nuclear Information System (INIS)

    Yu, Keuk Jong; You, Sung Chang; Kim, Han Gon

    2009-01-01

    The Optimized Power Reactor 1000 (OPR1000) has 4-finger and 12-finger Control Element Assemblies (CEAs). When the 12-finger CEA is dropped, Core Protection Calculator System (CPCS) shuts down the reactor to prevent fuel damage that could occur from the sudden reactor power peaking. By contrast, the improved CPCS of Advanced Power Reactor 1400 (APR1400), which has systems similar to those of the OPR1000, decreases reactor power rapidly using its Reactor Power Cutback System (RPCS) to avoid unwanted reactor trips caused by the CPCS during a 12- finger CEA drop event. RETRAN is a best-estimate code for transient analysis of Non-LOCA. The RETRAN control logic, which includes the function of reducing reactor power during a 12-Finger CEA drop, has been developed for the APR1400. A MATRAN program has also been developed. MATRAN is the interface program for realtime processing to connect RETRAN with MASTER code which is a nuclear analysis and design code. MATRAN supplies adequate feedback reactivities from the MASTER code to RETRAN code. The purpose of this study is to analyze the behavior of a nuclear reactor core and its primary system using conventional RETRAN analysis procedure and MATRAN program analysis procedure during a 12- finger CEA drop. In addition, the axial power distribution and Axial Shape Index (ASI) are produced by the MATRAN program and they are confirmed as within operation limits

  8. Review of EU-APR Design for Selected Safety Issues of WERNA RHWG 2013

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Soo; Kim, Ji Hwan [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    Western European Nuclear Regulators' Association (WENRA) was established in 1999 to develop a harmonized approach to nuclear safety and radiation protection and their regulation. In 2013, the Reactor Harmonization Working Group (RHWG) of WENRA sets out the common positions on the seven selected key safety issues. This paper is to introduce the regulatory positions of WENRA RHWG 2013 and to review the compliance of the EU-APR with them. In this paper, we reviewed the compliance of the EUAPR regarding seven safety issues for new NPPs presented by WERNA RHWG in 2013. The EU-APR design fully complies with all WERNA RHWG safety issues since the following measures have been incorporated in it: - Successive five levels of DiD maintaining independence between different levels of DiD - Diverse design against multiple failure events such as ATWS, SBO, Loss of Ultimate Heat Sink, and Loss of Spent Fuel Pool Cooling - SAs dedicated mitigation systems to ensure the containment integrity during the SAs. - Practically eliminates accident sequences with a large or early release of radiological materials by diverse designs for multiple failure events, SAs dedicated mitigation system, and double containment design - Standard site parameters not lead to core melt accidents due to natural or man-made external hazards.

  9. Evaluation of Coolant Injection Procedure in the Severe Accident Management Strategy of APR1400

    International Nuclear Information System (INIS)

    Cho, Yongjin; Lim, Kukhee; Song, Sungchu; Lee, Sukho; Hwang, Taesuk

    2013-01-01

    A coolant injection strategy in the severe accident management guideline (SAMG) of APR1400 relates to immediate coolant injection into RCS (Reactor Coolant System) or injection following the recovery of secondary coolant inventory. This strategy could play important role in accident mitigation and radiological consequences. In this study, appropriateness of the strategy was evaluated using MELCOR1.8.6 and several sensitivity studies of the key parameters were performed. Analysis for APR1400 using MELCOR 1.8.6 was performed to evaluate the effectiveness of accident management strategies and the following conclusions were identified. Sequential operation of secondary and RCS injection may not be the best strategy and the simultaneous injection of secondary and RCS injection could be more preferable. At least, the RCS injection should start before complete drainage of water in the safety injection tank using mobile pumps. In this study, the effectiveness of timing of operator action has been examined and the amount of injection flowrate needs to be studied in the future

  10. Post-test analysis for the APR1400 LBLOCA DVI performance test using MARS

    International Nuclear Information System (INIS)

    Bae, Kyoo Hwan; Lee, Y. J.; Kim, H. C.; Bae, Y. Y.; Park, J. K.; Lee, W.

    2002-03-01

    Post-test analyses using a multi-dimensional best-estimate analysis code, MARS, are performed for the APR1400 LBLOCA DVI (Direct Vessel Injection) performance tests. This report describes the code evaluation results for the test data of various void height tests and direct bypass tests that have been performed at MIDAS test facility. MIDAS is a scaled test facility of APR1400 with the objective of identifying multi-dimensional thermal-hydraulic phenomena in the downcomer during the reflood conditions of a large break LOCA. A modified linear scale ratio was applied in its construction and test conditions. The major thermal-hydraulic parameters such as ECC bypass fraction, steam condensation fraction, and temperature distributions in downcomer are compared and evaluated. The evaluation results of MARS code for the various test cases show that: (a) MARS code has an advanced modeling capability of well predicting major multi-dimensional thermal-hydraulic phenomena occurring in the downcomer, (b) MARS code under-predicts the steam condensation rates, which in turn causes to over-predict the ECC bypass rates. However, the trend of decrease in steam condensation rate and increase in ECC bypass rate in accordance with the increase in steam flow rate, and the calculation results of the ECC bypass rates under the EM analysis conditions generally agree with the test data

  11. Analysis of Total Loss of Feedwater for APR1400 using SPACE

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seong Min; Park, Seok Jeong; Park, Chan Eok; Choi, Jong Ho; Lee, Gyu Cheon [KEPCO Engineering and Construction, Deajeon (Korea, Republic of)

    2016-10-15

    The Total Loss of FeedWater (TLOFW) event is an accident that main feedwater and auxiliary feedwater of secondary side are not supplied to steam generators. APR1400 uses the Safety Depressurization and Vent System (SDVS) for the F and B operation and SDVS is designed to perform the rapid depressurization function of Reactor Coolant System (RCS) through the remote manual operation when TLOFW is occurred. If RCS pressure falls below a Safety Injection Pump (SIP) working pressure, it can be possible to start the F and B operation which injects SIP flow to RCS and releases the RCS vapor and two-phase flow through Pilot Operated Safety Relief Valves (POSRVs) by opening the POSRVs, and then it can be possible to remove the decay heat. The design requirement of SDVS is that the core water level should be maintained at higher than 2 feet from the top of active core during the F and B operation. The TLOFW analysis was carried out to evaluate the capability of decay heat removal for APR1400 using newly developed SPACE code. The analysis results show that the F and B operation with 2 POSRVs and 2 SIPs and the F and B operation with 4 POSRVs and 4 SIPs meet the SDVS design requirement for the fuel cladding temperature. The comparison with RELAP5 shows good agreement and it validates the applicability of SPACE code for this type of accident analysis.

  12. Extended station blackout analyses of an APR1400 with MARS-KS

    Directory of Open Access Journals (Sweden)

    Kim Woongbae

    2016-01-01

    Full Text Available The Fukushima Daiichi nuclear power plant accident shows that natural disasters such as earthquakes and the subsequent tsunamis can cause station blackout for several days. The electric energy required for essential systems during a station blackout is provided from emergency backup batteries installed at the nuclear power plant. In South Korea, in the event of an extended station blackout, the life of these emergency backup batteries has recently been extended from 8 hours to 24 hours at Shin-Kori 5, 6, and APR1400 for design certification. For a battery life of 24 hours, available safety means system, equipment and procedures are studied and analyzed in their ability to cope with an extended station blackout. A sensitivity study of reactor coolant pump seal leakage is performed to verify how different seal leakages could affect the system. For simulating extended station blackout scenarios, the best estimate MARS-KS computer code was used. In this paper, an APR1400 RELAP5 input deck was developed for station blackout scenario to analyze operation strategy by manually depressurizing the reactor coolant system through the steam generator's secondary side. Additionally, a sensitivity study on reactor coolant pump seal leakage was carried out.

  13. Probability of Neutralization Estimation for APR1400 Physical Protection System Design Effectiveness Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Myungsu; Lim, Heoksoon; Na, Janghwan; Chi, Moongoo [Korea Hydro and Nuclear Power Co. Ltd. Central Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    It is focusing on development of a new designing process which can be compatible to international standards such as IAEA1 and NRC2 suggest. Evaluation for the design effectiveness was found as one of the areas to improve. If a design doesn't meet a certain level of effectiveness, it should be re-designed accordingly. The effectiveness can be calculated with combination of probability of Interruption and probability of neutralization. System Analysis of Vulnerability to Intrusion (SAVI) has been developed by Sandia National Laboratories for that purpose. With SNL's timely detection methodology, SAVI has been used by U.S. nuclear utilities to meet the NRC requirements for PPS design effectiveness evaluation. For the SAVI calculation, probability of neutralization is a vital input element that must be supplied. This paper describes the elements to consider for neutralization, probability estimation methodology, and the estimation for APR1400 PPS design effectiveness evaluation process. Markov chain and Monte Carlo simulation are often used for simple numerical calculation to estimate P{sub N}. The results from both methods are not always identical even for the same situation. P{sub N} values for APR1400 evaluation were calculated based on Markov chain method and modified to be applicable for guards/adversaries ratio based analysis.

  14. The Analysis of Uncontrolled CEA Bank withdrawal from low power Accident for APR1400 Using KNAP

    International Nuclear Information System (INIS)

    Yang, Chang-Keun; Kim, Yo-Han; Ha, Sang-Jun

    2006-01-01

    In Korea, the nuclear industries such as fuel manufacturer, the architect engineer and the utility, have been using the methodologies and codes of vendors, such as Westinghouse(WH), Combustion Engineering(CE), for the safety analyses of nuclear power plants. Consequently the industries have kept up the many organizations to operate the methodologies and to maintain the codes for each vendor. It may cause difficulty to improve the safety analyses efficiency and technology related. So, the necessity another of methodologies and code systems applicable to Non- LOCA, beyond design basis accident and performance analyses for all types of pressurized water reactor (PWR) has been raised. As the first requirement, the best-estimate codes were required for applicable wider application area and realistic behavior prediction of power plants with various and sophisticated functions. After the review on several candidates, RETRAN-3D has been chosen as a system analysis code. The draft version of the methodology was developed based on the references for the general purpose, and modified to apply it to specific plants in Korea. As a part of the feasibility estimation for the methodology and code system, uncontrolled CEA bank withdrawal from low power accident for the Advanced Power Reactor 1400(APR1400) was selected to verify the feasibility using the RETRAN-3D. And the results were compared with the Standard Safety Analysis Reports (SSAR) of APR1400

  15. Extended Station Blackout Analyses of an APR1400 with MARS-KS

    Energy Technology Data Exchange (ETDEWEB)

    Kim, WoongBae; Jang, HyungWook; Oh, Seungjong; Lee, Sangyong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2016-10-15

    The Fukushima Dai-ichi nuclear power plant accident shows that natural disasters such as earthquakes and the subsequent tsunamis can cause station blackout for several days. The electricity required for essential systems during a station blackout is provided from the emergency backup batteries installed at the nuclear power plant. In South Korea, in the event of an extended station blackout, the life of these emergency backup batteries has recently been extended from 8 hours to 24 hours at Shin-Kori 5, 6 and APR1400 for design certification. For a battery life of 24 hours, available safety means system, equipment and procedures are studied and analyzed in their ability to cope with an extended station blackout. A sensitivity study of reactor coolant pump seal leakage is performed to verify how different seal leakages could affect the system. For simulating of extended station blackout scenarios, the best estimate MARS-KS was used. In this paper, an APR1400 RELAP5 input deck was developed for station blackout scenario to analyze operation strategy by manually depressurizing the reactor coolant system through the steam generator's secondary side. Additionally, a sensitivity study was performed on reactor coolant pump seal leakage.

  16. Domestic activity for technical development of the APR1400's RCP performance test

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Seok; Kim, Seok; Bae, Byung-Uhn; Cho, Yun-Jae; Kim, Yeon-Sik; Jeon, Woo-Jin; Yun, Young-Jung [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The thermal hydraulic and electric capability of the RCP test facility (RCPTF) covers up to 18.5 MPa, 343 .deg. C, 11.7 m{sup 3}/s, and 14.0 MW in the design pressure, temperature, flow rate, and the maximum electric power, respectively. In 2013, commissioning test had been performed to verify its designed capability, followed by several modifications in the RCPTF including signal processing and control logic to enhance verification and evaluation capability of the RCP performance. After finishing the commissioning and modification of the RCPTF, type test for the new-type RCP had been performed successfully. In this paper, several technical issues developed in the 2013 and the type test's method and results will be described. In the present paper, the technical activities for the development of the verification test of APR1400's RCP are described. KAERI has completed the full set of technology development, prerequisite for the RCP verification test, and now on the way to perform a test for the sealing capacity of the seal assembly during the Station Block Out (SBO) condition of APR1400.

  17. Study of the dry processing of uranium ores; Etude des traitements de minerais d'uranium par voie seche

    Energy Technology Data Exchange (ETDEWEB)

    Guillet, H

    1959-02-01

    A description is given of direct fluorination of pre-concentrated uranium ores in order to obtain the hexafluoride. After normal sulfuric acid treatment of the ore to eliminate silica, the uranium is precipitated by a load of lime to obtain: either impure calcium uranate of medium grade, or containing around 10% of uranium. This concentrate is dried in an inert atmosphere and then treated with a current of elementary fluorine. The uranium hexafluoride formed is condensed at the outlet of the reaction vessel and may be used either for reduction to tetrafluoride and the subsequent manufacture of uranium metal or as the initial product in a diffusion plant. (author) [French] Il s'agit d'une description de fluoration directe de preconcentres de minerais d'uranium en vue d'obtention d'hexafluorure. Apres attaque sulfurique normale du minerai, afin d' eliminer la silice, l' uranium est precipite par un toit de chaux pour obtenir: ou uranate de chaux impur de titre moyen, ou uranium de la dizaine du pourcentage. Ce concentre seche en atmosphere inerte est soumis a un courant de fluor elementaire. L'hexafluorure d'uranium forme est condense a la sortie du reacteur et peut etre utilise soit apres reduction en tetrafluorure par l'elaboration d'uranium metal, soit comme produit de base dans le cadre d'une usine de diffusion. (auteur)

  18. Study of the dry processing of uranium ores; Etude des traitements de minerais d'uranium par voie seche

    Energy Technology Data Exchange (ETDEWEB)

    Guillet, H

    1959-02-01

    A description is given of direct fluorination of pre-concentrated uranium ores in order to obtain the hexafluoride. After normal sulfuric acid treatment of the ore to eliminate silica, the uranium is precipitated by a load of lime to obtain: either impure calcium uranate of medium grade, or containing around 10% of uranium. This concentrate is dried in an inert atmosphere and then treated with a current of elementary fluorine. The uranium hexafluoride formed is condensed at the outlet of the reaction vessel and may be used either for reduction to tetrafluoride and the subsequent manufacture of uranium metal or as the initial product in a diffusion plant. (author) [French] Il s'agit d'une description de fluoration directe de preconcentres de minerais d'uranium en vue d'obtention d'hexafluorure. Apres attaque sulfurique normale du minerai, afin d' eliminer la silice, l' uranium est precipite par un toit de chaux pour obtenir: ou uranate de chaux impur de titre moyen, ou uranium de la dizaine du pourcentage. Ce concentre seche en atmosphere inerte est soumis a un courant de fluor elementaire. L'hexafluorure d'uranium forme est condense a la sortie du reacteur et peut etre utilise soit apres reduction en tetrafluorure par l'elaboration d'uranium metal, soit comme produit de base dans le cadre d'une usine de diffusion. (auteur)

  19. La nécropole mérovingienne d’Erstein (Bas-Rhin) : étude des textiles minéralisés au contact des fibules

    OpenAIRE

    Médard, Fabienne; Rohmer, Pascal; Moulherat, Christophe; Guillaume, Jacques

    2008-01-01

    Au cours des années 1999 et 2000, des fouilles de sauvetage ont été menées au lieu dit « Beim Limersheimerweg », non loin de la ville d’Erstein (France, Bas-Rhin). Une importante nécropole datée entre le début du VIe et la fin du VIIe siècle après J.-C. a été mise au jour. 239 sépultures au mobilier funéraire très riche ont été découvertes. Alors que les matières organiques d’origine végétale et animale ont été peu préservées, les nombreuses pièces d’armement (épées longues, scramasaxes, cout...

  20. Uncertainty Evaluation of a Postulated LBLOCA for APR+ using KINS Realistic Evaluation Methodology and MARS-KS

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Min Jeong; Marigomena, Ralph; Yoo, Tae Ho; Kim, Y. S.; Sim, S. K. [Environment and Energy Technology, Inc., Daejeon (Korea, Republic of); Bang, Young Seok [KINS, Daejeon (Korea, Republic of)

    2014-05-15

    As a part of the regulatory safety research, Korea Institute of Nuclear Safety(KINS) also developed a best estimate safety analysis regulatory audit code, MARS-KS, to realistically predict and better understand the physical phenomena of the design basis accidents. KINS improved uncertainty propagation methodology using MARS-KS and applied the improved uncertainty evaluation method for the Shinkori Units 3 and 4 LBLOC. This study is to evaluate the uncertainty propagation of a postulated LBLOCA and quantify the safety margin using KINS-REM and MARS-KS code for the APR+ (Advanced Pressurizer Reactor Plus) Standard Safety Analysis Report(SSAR) which is under regulatory review by the KINS for its design approval. KINS-REM LBLOCA realistic evaluation methodology was used for the regulatory assessment of the APR+ LBLOCA using MARS-KS to evaluate the uncertainty propagation of the uncertainty variables as well as to assess the safety margin during the limiting case of the APR+ double ended guillotine cold leg LBLOCA. Uncertainty evaluation for the APR+ LBLOCA shows that the reflood PCT with upper limit of 95% probability at 95% confidence level is 1363.2 K and is higher than the blowdown PCT95/95 of 1275.3 K. The result shows that the current evaluation of APR+ LBLOCA PCT is within the acceptance criteria of 1477 K ECCS.

  1. Le traitement judiciaire de la jeunesse délinquante à Genève de 1738 à 17921

    OpenAIRE

    Bernasconi, Gianenrico

    2009-01-01

    Au cours des dernières années, la nécessité de dépasser la frontière chronologique qui situe la « naissance » de la délinquance juvénile au XIXe siècle s’est affirmée dans le débat historiographique. Certes le dispositif légal et institutionnel réservé aux mineurs se met en place au XIXe siècle, cependant l’étude de l’ancienne doctrine et des procédures criminelles genevoises de 1738 à 1792 révèle une pratique judiciaire sensible aux problèmes posés par la criminalité juvénile. Les magistrats...

  2. Some recent results in Au+Au collisions at AGS

    International Nuclear Information System (INIS)

    Chen, Z.

    1996-01-01

    Many interesting results have been obtained for Au + Au reactions at AGS. The basic information about the reaction dynamics comes from the hadronic distribution. and this article reviews the recent progress of these distributions in details. The proton rapidity distribution shows significantly increased stopping compared to lighter systems, implying the formation of a state of high baryon density. Unlike reactions at this energy induced by lighter heavy ions, at low m t - m 0 the proton invariant spectra deviate from a single exponential shape and become fear,. while pion spectra are found to rise in this region, with the π - spectra rising faster than the π + spectra. The inverse slope parameter increases faster for particles of larger mass as the number of participants in the reaction increases, an indication of increased effect of radial expansion in central collision. Anti-proton Needs have been measured recently, and unfortunately a comparison among current results from different experiments indicates discrepancy

  3. Le premier élément du patrimoine maritime de Saint-Pierre-et-Miquelon protégé au titre des monuments historiques

    Directory of Open Access Journals (Sweden)

    Herveline Delhumeau

    2009-05-01

    Full Text Available Ymac a été classé par arrêté du 14 février 2008 au titre des monuments historiques en raison de l’intérêt ethnologique lié à sa fonction de bateau-pilote. (fig. n° 1Figure 1Ymac, ex-Radar III. Photographie après 2003. © Yannick Lafourcade.Construit en 1965 à Mavilette (Nouvelle-Ecosse, Canada par le chantier Alfred Boudreau, ce bateau traditionnel de pêche à coque en bois avait été initialement armé pour la pêche aux poissons plats par Alex Doucet, d’où son premier nom Alex D. Après avoir p...

  4. Nuclear spin of 185Au and hyperfine structure of 188Au

    International Nuclear Information System (INIS)

    Ekstroem, C.; Ingelman, S.; Wannberg, G.

    1977-03-01

    The nuclear spin of 185 Au, I = 5/2, and the hyperfine separation of 188 Au, Δγ = +- 2992(30) MHz, have been measured with the atomic-beam magnetic resonance method. The spin of 185 Au indicates a deformed nuclear shape in the ground state. The small magnetic moment of 188 Au is close in value to those of the heavier I = 1 gold isotopes 190 192 194 Au, being located in a typical transition region. (Auth.)

  5. Apreçando Derivativos de Crédito no Brasil Credit Derivatives Pricing in Brazil

    Directory of Open Access Journals (Sweden)

    Jorge C. Kapotas

    2004-12-01

    Full Text Available Neste artigo apresentamos os principais modelos de apreçamento de instrumentos de crédito onde desenvolvem-se as equações de apreçamento de debêntures. Para tal, utilizam-se os modelos estruturais, de intensidade e, finalmente, de rating. A seguir, definimos o que são derivativos de crédito (CDS e derivamos fórmulas de apreçamento para estes instrumentos. Concluímos este artigo com uma aplicação ao mercado brasileiro. In this paper we present the main models used for pricing defaultable bonds and credit derivatives. The Merton structural model, the intensity framework and a Ratings based model are considered. We apply these techniques to the pricing of credit derivatives on Brazilian US$-indexed treasury bonds.

  6. Treatment of radiostrontium uptake in man; Traitement de la fixation de radiostrontium chez l'homme; Lechenie posledstvij pogloshcheniya radioaktivnogo strontsiya u cheloveka; Tratamiento de la radiotoxemla humana causada por absorcion de radioestroncio

    Energy Technology Data Exchange (ETDEWEB)

    Volf, V. [Department of Ionizing Radiation Institute of Industrial Hygiene and Occupational Disease, Prague, CSSR (Czech Republic)

    1963-02-15

    In short-term experiments on rats the passage of radioactive strontium through the intestinal wall was modified by oral treatment using barium sulphate and normal calcium phosphate. However, in rats on a diet containing barium sulphate there was no change in the absorption of Sr{sup 90} given in drinking water. It was concluded that this substance could be of value in first-aid treatment only. In two cases of slight internal contamination following accidental Sr{sup 90} nitrate inhalation, barium sulphate (Skiabaryum Spofa) was administered orally within 10 and 30 min after the inhalation of Sr{sup 90}. The effectiveness of this treatment was tested in model experiments on rats performed under similar conditions as in the accidents. More recently, experiments on similar lines have been carried out on several cancer patients, in order to investigate further possibilities of first-aid treatment following acute internal radiostrontium contamination in man. (author) [French] Dans des experiences de breve duree sur les rats, le passage de radiostrontium a travers la paroi de l'intestin etait modifie par l'administration par voie buccale de sulfate de baryum et de phosphate de calcium normal. Toutefois, chez des rats dont le regime alimentaire contenait du sulfate de baryum, il n'y a pas eu de modification de l'absorption de {sup 90}Sr melange a l'eau de boisson. On en conclut que cette substance ne peut etre utile que pour un traitement de premiere urgence. Dans deux cas de legere contamination interne par inhalation accidentelle de {sup 90}Sr sous forme de nitrate, on a administre du sulfate de baryum (Skiabaryum Spofa) par voie buccale dans les 10 et les 30 min qui ont suivi l'inhalation de {sup 90}Sr. L'efficacite de ce traitement a ete etudiee au cours d'experiences temoins effectuees sur des rats dans des conditions identiques a celles des accidents. Plus recemment, on a procede a des experiences analogues sur plusieurs cancereux en vue de trouver d

  7. Le recours aux catégories dans la gestion du choix au cours d’un repas au restaurant

    Directory of Open Access Journals (Sweden)

    Hugol-Gential Clémentine

    2012-07-01

    Full Text Available Ce travail, ancré dans le champ de l’Analyse Conversationnelle (Sacks, 1992, s’intéresse à une question centrale à laquelle les clients sont perpétuellement confrontés lors de la prise d’un repas au restaurant : le choix. Plus précisément, nous nous intéressons à son caractère situé et à son déploiement en interaction en nous basant sur un corpus audiovisuel collecté en situation « naturelle » de production, lors de repas au restaurant, afin d’étudier la parole-en-interaction telle qu’elle est localement produite et organisée par les participants (Heath, Hindmarsch & Luff, 2010. Après avoir exposé le lien entre identité et alimentation et la notion de catégorisation telle qu’elle a été développée en Analyse Conversationnelle, nous proposerons deux analyses de séquences de prise de commande pendant lesquelles les choix des clients sont discutés et négociés avec le sommelier ou le serveur. Grâce à des analyses séquentielles basées sur des transcriptions fines, nous soulignerons que les participants à l’interaction manifestent de façon reconnaissable qui ils sont (clients experts, non experts, habitués... afin d’organiser de façon intelligible leurs actions et de permettre à leurs partenaires de s’y ajuster. Nous analyserons finement les catégories utilisées par les participants, et nous décrirons les différents procédés mobilisés afin d’organiser et d’orienter la prise de commande. Ainsi, dans un premier extrait, nous verrons que les clients s’orientent, tout d’abord, vers l’exhibition de leur propre identité, tandis que dans un deuxième extrait, c’est le plat à la carte qui fait l’objet d’une première catégorisation. L’ensemble de ce travail nous permettra de montrer que les catégories sont structurantes pour l’organisation du choix et que leur déploiement séquentiel au cours de l’interaction est constitutif des affiliations ou des désaffiliations lors

  8. Viollet-le-Duc ou la caricature au cour du style

    OpenAIRE

    Linford, Sarah

    2014-01-01

    « Il y a le style ; il y a les styles. » Ainsi commence l’un des articles phares du Dictionnaire raisonné de l’architecture française du XIe au XVIe siècle, d’Eugène-Emmanuel Viollet-le-Duc. L’article sur le style paraît dans le huitième tome, en 1868, quatorze ans après la publication du premier. Article de maturité, il constitue un condensé de la pensée de Viollet-le-Duc et révèle certaines clefs de voûte de son système. « Les styles sont les caractères qui font distinguer entre elles les é...

  9. Influence du taux d'humidité et de traitements de surface (laser et implantations d'ions) sur la corrosion atmosphérique de matériaux utilisés en connectique (nickel doré)

    Science.gov (United States)

    Perrin, C.; Simon, D.

    1999-07-01

    suppress the porosities of the gold layer. These treatments lead to a remarkable improvement of the corrosion resistance of the material. La première partie de ce travail est une étude qualitative et quantitative de la corrosion d'un matériau utilisé en connectique, constitué de laiton recouvert d'un dépôt de nickel électrochimique de 5 μm et d'un dépôt d'or de 0,4 μm ou de 1 μm. Les essais de corrosion ont été conduits dans de l'air synthétique humide (taux d'humidité variable entre 15 % et 90 %) contenant de faibles quantités de NO2 (0,2 vpm), SO2 (0,2 vpm), Cl2 (0,01 vpm). Le comportement du matériau en fonction du taux d'humidité a été étudié. Les résultats obtenus montrent que les produits de corrosion croissent sous forme d'amas bien localisés. Ces amas sont constitués principalement de nitrates, sulfates, chlorures et hydroxydes de nickel et de zinc. La quantité de produits formés et la proportion de sulfates croissent avec le taux d'humidité. En revanche, le rapport zinc/nickel croît lorsque le taux d'humidité diminue. Nous avons identifié les composés formés, essentiellement grâce à une méthode développée au laboratoire associant la microgravimétrie, la chromatographie ionique et l'absorption atomique, et également par analyse X. Ces études ont montré que la protection du nickel par l'or exige un dépôt d'or parfaitement étanche. Il semble que très souvent les porosités responsables de l'apparition d'une corrosion traversent à la fois la couche d'or et de nickel, entraînant l'attaque du zinc par corrosion galvanique. Les analyses effectuées au MEB ont permis de montrer qu'il existait probablement dans ces porosités des composés organiques liés à l'élaboration de ces couches et que lors de l'attaque galvanique du nickel et du zinc, le carbone est rejeté à la périphérie des amas. La quantité de carbone présent dans la couche a pu être déterminée par des analyses nucléaires réalisées au Van De Graaff

  10. Etude comparative sur la propagation de l'endommagement apres impact des composites carbone/epoxy renforces par piquage au fil Kevlar et titane-nickel

    Science.gov (United States)

    Vachon, Pierre-Luc

    Composite laminates have strong in-plane mechanical properties, but they are generally weaker through their thickness. This specificity makes the laminates prone to delamination, particularly under low-velocity impact loads. Consequently numerous research efforts have been dedicated to developing interlaminar reinforcing methods, such as transverse stitching. The present project proposes the use of the stitching technique combined with a special stitching thread made of superelastic TiNi alloy. This technology is intended to improve the delamination toughness in composite laminates loaded in bending. In the first part of this study a numerical model was developed for analyzing composite structures. The 3-D finite element model was built with the ANSYS commercial software using 20-node solid and 8-node shell elements. The progressive damage modeling technique was used, allowing the prediction of delamination propagation in a laminate submitted to various loading modes. The model was validated for a plate under quasi-static traction load, and it was then used to simulate three-point bending tests. Secondly, carbon/epoxy composite panels were fabricated, with each panel containing unstitched and stitched specimens. Two different materials were used for the stitching thread: superelastic TiNi wires and Kevlar threads as a reference. Some stitched specimens were cut in slices in order to make some observations of the internal stitch using an optical microscope. Standardized low-velocity impact tests and compression after impact tests were carried out on stitched and unstitched specimens (ASTM D7136 and D7137). The Kevlar reinforcements have shown great performance in reducing the delaminated zone after impact, as well as in improving the residual compression strength. The TiNi reinforcements provided encouraging results during the impact tests, though being less effective than the Kevlar threads. During the compression after impact tests, only a slight difference could be measured between the TiNi-stitched and the unstitched specimens. Then the bending performance of the specimens was quantified experimentally by calculating the energy required to create a unit volume of damaged material (Gv, J/mm3). This metric is similar to the Strain Energy Release Rate (SERR) commonly used in studies on delamination. According to the experimental results, the damage resistance in three-point bending was not improved by the Kevlar reinforcements, despite the reduced damaged zone after the impact test. Indeed, when the strain energy in bending is relativized to the induced damaged volume during propagation, it turns out that the TiNi reinforcements are more effective than the Kevlar's for improving the damage resistance. Finally, the numerical study on the behavior of both types of stitched reinforcements allowed identifying subtle differences between those. Indeed, both stitching threads (TiNi and Kevlar) promoted the interlaminar propagation of the delamination during simulation of the bending test, with this behavior being less pronounced for the TiNi-stitched plate. However the Kevlar threads seemed more effective for stopping this propagation in the zones between the stitches. Keywords: composite materials, stitching, numerical model, shape memory alloy, three-point bending, low-velocity impact, ultrasound imaging.

  11. Après l’État-nation : application au cas de la construction européenne de 1945 à nos jours

    Directory of Open Access Journals (Sweden)

    Julien Rajaoson

    2013-08-01

    Full Text Available The advent of a global economy, which attempts to escape state regulation, requires, according to Habermas, a paradigm shift in institutional terms. The nation-state was able to objectify in a new way the “correctable” nature of social inequalities. However, a nation-state whose fundamental structure evolves into a post-national state could take the risk of exposing itself to a deficit of political legitimacy, and “democratic trust”. Thus resulting in an inability of nation-states, the only possibility is to diagnose the restriction of their freedom of maneuver, a fortiori before the establishment of a post-national structure. Within this context, the evolution of the nation-state seems to lead to a political crisis which implies powerlessness.

  12. Presence of interleukin 6 at the cutaneous level after in vivo neutron irradiation; Presence d`interleukine 6 au niveau cutane apres irradiation neutronique in vivo

    Energy Technology Data Exchange (ETDEWEB)

    Agay, D.; Pradeau, P.; Edgard, L.; Van Uye, A.; Mestries, J.C.

    1994-12-31

    In this study we investigated the in situ localization of IL-6 in mixed neutron-gamma irradiated baboons belly skin. Using immunohistochemical methods, we demonstrated the presence of IL-6 as early as the first day after the irradiation day. However experimental conditions did not allow us to conclude to a causality relation between irradiation and IL-6 cutaneous presence. (author). 4 refs.

  13. Phylogenetic Diversity of aprA Genes in Subseafloor Sediments on the Northwestern Pacific Margin off Japan.

    Science.gov (United States)

    Aoki, Masataka; Kakiuchi, Ryota; Yamaguchi, Takashi; Takai, Ken; Inagaki, Fumio; Imachi, Hiroyuki

    2015-01-01

    Markedly diverse sequences of the adenosine-5'-phosphosulfate reductase alpha subunit gene (aprA), which encodes a key enzyme in microbial sulfate reduction and sulfur oxidation, were detected in subseafloor sediments on the northwestern Pacific off Japan. The aprA gene sequences were grouped into 135 operational taxonomic units (90% sequence identity), including genes related to putative sulfur-oxidizing bacteria predominantly detected in sulfate-depleted deep sediments. Our results suggest that microbial ecosystems in the subseafloor biosphere have phylogenetically diverse genetic potentials to mediate cryptic sulfur cycles in sediments, even where sulfate is rarely present.

  14. Les pertes après récolte en Afrique : examen analytique et synthèse ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Partout en Afrique, les pertes après récolte le long de la chaîne alimentaire, de la ferme à la table, mettent en péril la sécurité alimentaire des agriculteurs dépourvus de ressources. La réduction des pertes après récolte peut aider à accroître la disponibilité, la qualité nutritionnelle et la salubrité des aliments, et à améliorer ...

  15. L’apprentissage au CERN

    CERN Multimedia

    Staff Association

    2016-01-01

    En 1961, sur la base du constat que l’évolution du marché du travail nécessitait un besoin croissant de personnel qualifié, le 1er accord entre la République et canton de Genève et le CERN fut signé. Cet accord avait notamment pour objet la formation professionnelle de jeunes électroniciens et techniciens de laboratoires en physique. Le CERN, acteur local économique d’importance, soulignait par cet accord sa volonté de participer au développement économique et social local. Le 1er apprenti arriva au CERN en 1965. En 1971, le centre d’apprentissage fut créé ; il accueille aujourd’hui plus d’une vingtaine d’apprentis au total, à raison d’environ six nouveaux apprentis chaque année. Cet apprentissage est dédié aux jeunes âgés e...

  16. How Does Amino Acid Ligand Modulate Au Core Structure and Characteristics in Peptide Coated Au Nanocluster?

    Science.gov (United States)

    Li, Nan; Li, Xu; Zhao, Hongkang; Zhao, Lina

    2018-03-01

    The atomic structures and the corresponding physicochemical properties of peptide coated Au nanoclusters determine their distinctive biological targeting applications. To learn the modulation of amino acid ligand on the atomic structure and electronic characteristics of coated Au core is the fundamental knowledge for peptide coated Au nanocluster design and construction. Based on our recent coated Au nanocluster configuration study (Nanoscale, 2016, 8, 11454), we built the typically simplified Au13(Cys-Au-Cys) system to more clearly learn the basic modulation information of amino acid ligand on Au core by the density functional theory (DFT) calculations. There are two isomers as ligand adjacent bonding (Iso1) and diagonal bonding (Iso2) to Au13 cores. The geometry optimizations indicate the adjacent bonding Iso1 is more stable than Iso2. More important, the Au13 core of Iso1 distorts much more significantly than that of Iso2 by Cys-Au-Cys bonding through the root-mean-square deviation (RMSD) analysis, which modulate their electronic characteristics in different ways. In addition, the frontier molecular orbital results of Au13(Cys-Au-Cys) isomers confirm that the Au cores mainly determine the blue shifts of Au13(Cys-Au-Cys) systems versus the original Au13 core in their UV-visible absorption spectrum studies. The configuration of Au13 core performs deformation under Cys-Au-Cys ligand modulation to reach new stability with distinct atomic structure and electronic properties, which could be the theory basis for peptide coated AuNCs design and construction.

  17. Study of the low temperature oxidation of uranium powders and its application to the sintering of uranium oxide powders; Etude de l'oxydation des poudres dtranium a basse temperature et son application au frittage de poudres d'uranium oxyde

    Energy Technology Data Exchange (ETDEWEB)

    Conte-Albert, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-06-01

    techniques utilisees sont la micrographie, la thermogravimetrie, le frittage sous charge, la radiocristallographie. A 170 deg. C, sous air ou dans des melanges argon + oxygene, l'oxyde d'uranium forme est toujours UO{sub 2} et il est uniformement reparti autour des billes d'uranium de depart. Ces poudres mixtes se frittent facilement sous charge en phase {gamma}. On obtient des echantillons dont la densite est de 85 a 90 pour cent de la densite theorique. L'influence de l'UO{sub 2} sur les proprietes de l'uranium a ete mise en evidence par dilatometrie et cyclage thermique en phase {alpha}. Les temperatures des changements de phase {alpha} {r_reversible} {beta}, {beta} {r_reversible} {gamma} sont abaissees, l'allongement remanent est diminue. Les echantillons de bonne densite ont une bonne tenue au cyclage thermique; les defauts caracteristiques de l'uranium: grande distorsion, peau d'orange, n'existent presque plus. Des traitements thermiques sous vide secondaire a 1050 deg. C provoquent la cristallisation de l'UO{sub 2} sous forme geometrique et l'apparition d'une phase, de systeme cristallin C.F.C., de formule U{sub W}C{sub X}O{sub Y}N{sub Z}. Cette phase provoque un nouvel abaissement des temperatures de transformation {alpha} {r_reversible} {beta}, {beta} {r_reversible} {gamma} de l'uranium. Apres dix cycles dilatometriques, l'allongement remanent de l'echantillon est de l'ordre de 0,5 pour cent. La tenue au cyclage thermique d'un echantillon de faible densite ayant ete traite thermiquement est comparable a celle d'un echantillon de bonne densite n'ayant pas subi de traitement thermique. (auteur)

  18. Reliability analysis of protection system of advanced pressurized water reactor - APR 1400

    International Nuclear Information System (INIS)

    Varde, P. V.; Choi, J. G.; Lee, D. Y.; Han, J. B.

    2003-04-01

    Reliability analysis was carried out for the protection system of the Korean Advanced Pressurized Water Reactor - APR 1400. The main focus of this study was the reliability analysis of digital protection system, however, towards giving an integrated statement of complete protection reliability an attempt has been made to include the shutdown devices and other related aspects based on the information available to date. The sensitivity analysis has been carried out for the critical components / functions in the system. Other aspects like importance analysis and human error reliability for the critical human actions form part of this work. The framework provided by this study and the results obtained shows that this analysis has potential to be utilized as part of risk informed approach for future design / regulatory applications

  19. Response Time Analysis and Test of Protection System Instrument Channels for APR1400 and OPR1000

    International Nuclear Information System (INIS)

    Lee, Chang Jae; Han, Seung; Yun, Jae Hee; Baek, Seung Min; Lee, Sang Jeong

    2015-01-01

    Safety limits are required to maintain the integrity of physical barriers designed to prevent the uncontrolled release of radioactive materials in nuclear power plants. The safety analysis establishes two critical constraints that include an analytical limit in terms of a measured or calculated variable, and a specific time after the analytical limit is reached to begin protective action. Keeping with the nuclear regulations and industry standards, satisfying these two requirements will ensure that the safety limit will not be exceeded during the design basis event, either an anticipated operational occurrence or a postulated accident. Various studies on the setpoint determination methodology for the safety-related instrumentation have been actively performed to ensure that the requirement of the analytical limit is satisfied. In particular, the protection setpoint methodology for the advanced power reactor 1400 (APP1400) and the optimized power reactor 1000 (OPR1000) has been recently developed to cover both the design basis event and the beyond design basis event. The developed setpoint methodology has also been quantitatively validated using specific computer programs and setpoint calculations. However, the safety of nuclear power plants cannot be fully guaranteed by satisfying the requirement of the analytical limit. In spite of the response time verification requirements of nuclear regulations and industry standards, it is hard to find the studies on the systematically integrated methodology regarding the response time evaluation. In cases of APR1400 and OPR1000, the response time analysis for the plant protection system is partially included in the setpoint calculation and the response time test is separately performed via the specific plant procedure. The test technique has a drawback which is the difficulty to demonstrate completeness of timing test. The analysis technique has also a demerit of resulting in extreme times that not actually possible. Thus

  20. Response Time Analysis and Test of Protection System Instrument Channels for APR1400 and OPR1000

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Jae; Han, Seung; Yun, Jae Hee; Baek, Seung Min [Department of Instrumentation and Control System Engineering, KEPCO Engineering and Construction, Daejeon (Korea, Republic of); Lee, Sang Jeong [Department of Electronics Engineering, Chungnam National University, Daejeon (Korea, Republic of)

    2015-07-01

    Safety limits are required to maintain the integrity of physical barriers designed to prevent the uncontrolled release of radioactive materials in nuclear power plants. The safety analysis establishes two critical constraints that include an analytical limit in terms of a measured or calculated variable, and a specific time after the analytical limit is reached to begin protective action. Keeping with the nuclear regulations and industry standards, satisfying these two requirements will ensure that the safety limit will not be exceeded during the design basis event, either an anticipated operational occurrence or a postulated accident. Various studies on the setpoint determination methodology for the safety-related instrumentation have been actively performed to ensure that the requirement of the analytical limit is satisfied. In particular, the protection setpoint methodology for the advanced power reactor 1400 (APP1400) and the optimized power reactor 1000 (OPR1000) has been recently developed to cover both the design basis event and the beyond design basis event. The developed setpoint methodology has also been quantitatively validated using specific computer programs and setpoint calculations. However, the safety of nuclear power plants cannot be fully guaranteed by satisfying the requirement of the analytical limit. In spite of the response time verification requirements of nuclear regulations and industry standards, it is hard to find the studies on the systematically integrated methodology regarding the response time evaluation. In cases of APR1400 and OPR1000, the response time analysis for the plant protection system is partially included in the setpoint calculation and the response time test is separately performed via the specific plant procedure. The test technique has a drawback which is the difficulty to demonstrate completeness of timing test. The analysis technique has also a demerit of resulting in extreme times that not actually possible. Thus

  1. A MARS and MIDAS Linked Accident Simulation for Large LOCA in APR1400

    International Nuclear Information System (INIS)

    Choi, Young; Kim, K. R.; Kim, D. H.; Chung, B. D.

    2006-01-01

    A linked calculation utilizing the design-basis code MARS and the severe accident code MIDAS has been accomplished for a station blackout simulation in APR1400. The MARS code was developed by using the RELAP3/MOD3 and COBRA-TF codes, while the MIDAS code is currently under a development process using the MELCOR code. The objectives of this paper are to explain how to identify the MAR-MIDAS linked calculation outlines and the technical problems, including the MARS data transfer method, the MIDAS input generation works and so on. For the performance verification of the MARS-MIDAS linked calculation, the MARS, MIDAS and their linkage system are run independently for the same initiating event, so that their data can be compared with each other after the selection of proper variables

  2. Minimum containment pressure and its effect on ECCS performance of APR-1400

    International Nuclear Information System (INIS)

    Kim, In Goo; Bang, Young S.; Kim, Hho Jung

    2004-01-01

    The containment pressure has a strong effect on the late reheat behavior for a large break LOCA, associated with the DVI issue. The downcomer boiling, which occurs during the post-reflood phase, has a negative effect on core cooling for a LBLOCA. Because the downcomer boiling is enhanced as the containment pressure decreases, how to determine containment pressure is important to the evaluation of ECCS performance. In spite of its importance of containment pressure, there are few studies on the containment pressure and the interaction between RCS and containment thermal hydraulics. To have a better knowledge of the effect of containment pressure on APR-1400 ECCS performance, a parametric study for containment pressure has been carried out. Also, the interaction between RCS and containment behavior has been also investigated

  3. Analysis Of Feedwater Line Break Of APR1400 By MARS Code

    International Nuclear Information System (INIS)

    Nguyen Thi Thanh Thuy; Le Dai Dien, Hoang Minh Giang

    2011-01-01

    This paper will deal with analysis of Feed water Line Break problem (FWLB) of the APR 1400 NPP with initial conditions: operation at 100% of power, double-ended break area of 0.058 m 2 and the break location of the feedwater line between the check valve and the steam generator. The analysis was simulated by MARS code through two step: calculation for steady state and calculation for transient state with initial condition mentioned. Some output result were presented with explanation: sequence of events corresponding to the time of the accident, the system behavior as temperature, pressure, steam generator water levels as well as DNBR, etc. before and after the accident. (author)

  4. Analysis Of Control Rod Ejection Of APR1400 By RELAP5

    International Nuclear Information System (INIS)

    Le Thi Thu; Hoang Minh Giang; Vo Thi Huong; Le Dai Dien

    2011-01-01

    This paper presents the analysis of Reactivity Induced Accident caused by ejection of a Control Element Assembly (CEA) from APR 1400 reactor vessel within 0.05 second. The initial condition were assumed as following: power level at 102%, delayed neutron fraction β = 412 pcm and CEA worth = 110 pcm. The analysis was simulated by RELAP5 code through two step: calculation of steady state and calculation of transient with initial condition mentioned as above. Some output results were presented with explanation: sequence of events corresponding to the time of the accident, the system behavior as power, reactivity feedback from fuel temperature changes (Doppler) as well as temperature, pressure, DNBR within 6 second of the accident. (author)

  5. Fabricating a Homogeneously Alloyed AuAg Shell on Au Nanorods to Achieve Strong, Stable, and Tunable Surface Plasmon Resonances

    KAUST Repository

    Huang, Jianfeng

    2015-08-13

    Colloidal metal nanocrystals with strong, stable, and tunable localized surface plasmon resonances (SPRs) can be useful in a corrosive environment for many applications including field-enhanced spectroscopies, plasmon-mediated catalysis, etc. Here, a new synthetic strategy is reported that enables the epitaxial growth of a homogeneously alloyed AuAg shell on Au nanorod seeds, circumventing the phase segregation of Au and Ag encountered in conventional synthesis. The resulting core–shell structured bimetallic nanorods (AuNR@AuAg) have well-mixed Au and Ag atoms in their shell without discernible domains. This degree of mixing allows AuNR@AuAg to combine the high stability of Au with the superior plasmonic activity of Ag, thus outperforming seemingly similar nanostructures with monometallic shells (e.g., Ag-coated Au NRs (AuNR@Ag) and Au-coated Au NRs (AuNR@Au)). AuNR@AuAg is comparable to AuNR@Ag in plasmonic activity, but that it is markedly more stable toward oxidative treatment. Specifically, AuNR@AuAg and AuNR@Ag exhibit similarly strong signals in surface-enhanced Raman spectroscopy that are some 30-fold higher than that of AuNR@Au. When incubated with a H2O2 solution (0.5 m), the plasmonic activity of AuNR@Ag immediately and severely decayed, whereas AuNR@AuAg retained its activity intact. Moreover, the longitudinal SPR frequency of AuNR@AuAg can be tuned throughout the red wavelengths (≈620–690 nm) by controlling the thickness of the AuAg alloy shell. The synthetic strategy is versatile to fabricate AuAg alloyed shells on different shaped Au, with prospects for new possibilities in the synthesis and application of plasmonic nanocrystals.

  6. Appraisal of the Psychiatric Diagnostic Screening Questionnaire in a perinatal cohort: The APrON study.

    Science.gov (United States)

    Leung, Brenda; Letourneau, Nicole; Bright, Katherine; Giesbrecht, Gerald F; Ntanda, Henry; Gagnon, Lisa

    2017-08-01

    Depression and anxiety are routinely screened as part of perinatal care. However, other Axis 1 disorders and specific anxiety disorders are less likely to be screened or assessed as part of obstetric care. The objective of this study was to determine whether the Psychiatric Diagnostic Screening Questionnaire (PDSQ) is a potentially useful tool to screen for psychiatric conditions in pregnant and postpartum women in a community setting. We compared the prevalence of DSM Axis I disorders obtained on the PDSQ with: (1) the prevalence of these disorders reported in previous studies of pregnant and postpartum women, and (2) scores obtained on the Edinburgh Postpartum Depression Scale (EPDS) and the Symptom Checklist-90-Revised (SCL-90R) anxiety scale. Data were obtained from the Alberta Pregnancy Outcomes and Nutrition (APrON) study. The PDSQ was completed by 1575 women prenatally and 1481 postnatally. The three most prevalent PDSQ conditions were social phobia, somatic disorder, and obsessive-compulsive disorder (OCD). The prevalence of social phobia, alcohol disorder, OCD and psychosis were higher in the APrON cohort compared with statistics in the literature. The proportion of women meeting depression and anxiety cut-offs on the PDSQ were lower than for the EPDS and the SCL-90R. The Cohens Kappa index ( k) indicated poor to fair agreement between the measures in classifying pregnant women as depressed or anxious. The PDSQ subscales may not be appropriate for the pregnant population. Research into instruments more specific to pregnant and postpartum women are needed to determine the prevalence of psychiatric disorders in this population.

  7. Preliminary Analysis of Ex-Vessel Steam Explosion using TEXAS-V code for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sung Chu; Lee, Jung Jae; Cho, Yong Jin; Hwang, Taesuk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-10-15

    The purpose of this study is to explore input development and the audit calculation using TEXAS-V code for ex-vessel steam explosion for a flooded reactor cavity of APR1400. TEXAS computational models are one of the simplified tools for simulations of fuel-coolant interaction during mixing, triggering and explosion phase. The models of TEXAS code were validated by performing the fundamental experimental investigation in the KROTOS facility at JRC, Ispra. The experiments such as KROTOS and FARO experiment are aimed at providing benchmark data to examine the effect of fuel-coolant initial conditions and mixing on explosion energetics with alumina and prototypical core material. TEXAS-V code used in this study was to analyze and predict the ex-vessel steam explosion for a reactor scale. The input deck to simulate the flooded reactor cavity of APR1400 is developed and base case calculation is performed. This study will provide a base for further study. The code will be of use for the evaluation and sensitivity study of ex-vessel steam explosion for ERVC strategy in the future studies. Analysis result of this study is similar to the result of other study. Through this study, it is found that TEXAS-V could be the used as a tool for predicting the steam explosion load on a reactor scale, as fast running computer code. In addition, TEXAS-V code could be to evaluate the impact of various uncertainties, which are not clearly understood yet, to provide a conservative envelope for the steam explosion.

  8. Preliminary Analysis of Ex-Vessel Steam Explosion using TEXAS-V code for APR1400

    International Nuclear Information System (INIS)

    Song, Sung Chu; Lee, Jung Jae; Cho, Yong Jin; Hwang, Taesuk

    2013-01-01

    The purpose of this study is to explore input development and the audit calculation using TEXAS-V code for ex-vessel steam explosion for a flooded reactor cavity of APR1400. TEXAS computational models are one of the simplified tools for simulations of fuel-coolant interaction during mixing, triggering and explosion phase. The models of TEXAS code were validated by performing the fundamental experimental investigation in the KROTOS facility at JRC, Ispra. The experiments such as KROTOS and FARO experiment are aimed at providing benchmark data to examine the effect of fuel-coolant initial conditions and mixing on explosion energetics with alumina and prototypical core material. TEXAS-V code used in this study was to analyze and predict the ex-vessel steam explosion for a reactor scale. The input deck to simulate the flooded reactor cavity of APR1400 is developed and base case calculation is performed. This study will provide a base for further study. The code will be of use for the evaluation and sensitivity study of ex-vessel steam explosion for ERVC strategy in the future studies. Analysis result of this study is similar to the result of other study. Through this study, it is found that TEXAS-V could be the used as a tool for predicting the steam explosion load on a reactor scale, as fast running computer code. In addition, TEXAS-V code could be to evaluate the impact of various uncertainties, which are not clearly understood yet, to provide a conservative envelope for the steam explosion

  9. Use case driven approach to develop simulation model for PCS of APR1400 simulator

    International Nuclear Information System (INIS)

    Dong Wook, Kim; Hong Soo, Kim; Hyeon Tae, Kang; Byung Hwan, Bae

    2006-01-01

    The full-scope simulator is being developed to evaluate specific design feature and to support the iterative design and validation in the Man-Machine Interface System (MMIS) design of Advanced Power Reactor (APR) 1400. The simulator consists of process model, control logic model, and MMI for the APR1400 as well as the Power Control System (PCS). In this paper, a use case driven approach is proposed to develop a simulation model for PCS. In this approach, a system is considered from the point of view of its users. User's view of the system is based on interactions with the system and the resultant responses. In use case driven approach, we initially consider the system as a black box and look at its interactions with the users. From these interactions, use cases of the system are identified. Then the system is modeled using these use cases as functions. Lower levels expand the functionalities of each of these use cases. Hence, starting from the topmost level view of the system, we proceeded down to the lowest level (the internal view of the system). The model of the system thus developed is use case driven. This paper will introduce the functionality of the PCS simulation model, including a requirement analysis based on use case and the validation result of development of PCS model. The PCS simulation model using use case will be first used during the full-scope simulator development for nuclear power plant and will be supplied to Shin-Kori 3 and 4 plant. The use case based simulation model development can be useful for the design and implementation of simulation models. (authors)

  10. Analysis for the Effects of Grid Voltage Degradation on APR1400 Operation, Case Study for Egypt

    International Nuclear Information System (INIS)

    Hassan, Mostafa Ahmed Fouad; Koo, Chang Choong

    2015-01-01

    Egypt is one of the countries planning to introduce a NPP into its electrical power system. Although the Egyptian power system has sufficient capacity to integrate any commercially available nuclear unit as the total installed capacity of the power system is more than 32GWe, which is more than 10 times capacity of any nuclear unit in the range of 1000 to 1700MWe, the system is vulnerable to extreme voltage variations, especially voltage degradation during peak load conditions. These conditions can lead to voltage collapse if a counter measure, usually load shedding, is not taken in a proper time. Hence, it is necessary to analyze the effect of such conditions on the safe and economic operation of the NPP. In this paper we analyzed the effects of grid voltage degradation on the safe and economic operation of the Advanced Power Reactor (APR1400) to determine any adverse effects on the plant auxiliary loads while operating in the Egyptian power system. In this paper the effects of grid voltage degradation on the safe and economic operation of APR1400 were investigated taking into account, generator operating limits, plant safety requirements, operation modes and loading categories in order to determine any adverse effect on the plant auxiliary loads while operating in the Egyptian power system. The results of the load flow and motor starting analysis demonstrated that during normal operation the automatic voltage regulator and transformers OLTCs can mitigate the effect of grid voltage degradation without any detrimental effect on the plant auxiliary loads. During the highly unlikely LOCA condition if the grid voltage degraded below 95%, the degraded voltage relays at Class 1E 4.16 kV buses will trip the supply and load breakers and reconnect the required safety loads to the EDG after 4 minutes time delay. During this period the safety loads required for LOCA can be started and accelerated to their rated speed safely even in the worst case of expected degraded voltage

  11. New tools for NTD vaccines: A case study of quality control assays for product development of the human hookworm vaccine Na-APR-1M74.

    Science.gov (United States)

    Pearson, Mark S; Jariwala, Amar R; Abbenante, Giovanni; Plieskatt, Jordan; Wilson, David; Bottazzi, Maria Elena; Hotez, Peter J; Keegan, Brian; Bethony, Jeffrey M; Loukas, Alex

    2015-01-01

    Na-APR-1(M74) is an aspartic protease that is rendered enzymatically inactive by site-directed mutagenesis and is a candidate antigen component in the Human Hookworm Vaccine. The mutant protease exerts vaccine efficacy by inducing antibodies that neutralize the enzymatic activity of wild type enzyme (Na-APR-1wt) in the gut of the hookworm, thereby depriving the worm of its ability to digest its blood meal. Previously, canines immunized with Na-APR-1(M74) and challenged with Ancylostoma caninum were partially protected against hookworm challenge infection, especially from the loss in hemoglobin observed in control canines and canine immunoglobulin (Ig) G raised against Na-APR-1 was shown to inhibit the enzymatic activity of Na-APR-1 wt in vitro, thereby providing proof of concept of Na-APR-1(M74) as a vaccine antigen. The mutated version, Na-APR-1(M74), was then expressed at the cGMP level using a Nicotiana benthamiana expression system (Fraunhofer, CMB, Delaware, MD), formulated with Alhydrogel®, and used to immunize mice in a dose-ranging study to explore the enzyme-neutralizing capacity of the resulting anti- Na-APR-1(M74) IgG. As little as 0.99 μg of recombinant Na-APR-1(M74) could induce anti Na-APR-1(M74) IgG in mice that were capable of inhibiting Na-APR-1w t-mediated digestion of a peptide substrate by 89%. In the absence of enzymatic activity of Na-APR-1(M74) as a surrogate marker of protein functionality, we developed an assay based on the binding of a quenched fluorescence-labeled inhibitor of aspartic proteases, BODIPY-FL pepstatin A (BDP). Binding of BDP in the active site of Na-APR-1 wt was demonstrated by inhibition of enzymatic activity, and competitive binding with unlabelled pepstatin A. BDP also bound to Na-APR-1(M74) which was assessed by fluorescence polarization, but with an ∼ 50-fold reduction in the dissociation constant. Taken together, these assays comprise a "toolbox" that could be useful for the analyses of Na-APR-1(M74) as it

  12. Transport characteristics in Au/pentacene/Au diodes

    Science.gov (United States)

    Hayashi, Toshiaki; Naka, Akiyoshi; Hiroki, Masanobu; Yokota, Tomoyuki; Someya, Takao; Fujiwara, Akira

    2018-03-01

    We have used scanning and transmission electron microscopes (SEM and TEM) to study the structure of a pentacene thin film grown on a Au layer with and shown that it consists of randomly oriented amorphous pentacene clusters. We have also investigated the transport properties of amorphous pentacene in a metal-semiconductor-metal (MSM) diode structure and shown that the current is logarithmically proportional to the square root of the applied voltage, which indicates that transport occurs as the result of hopping between localized sites randomly distributed in space and energy.

  13. Cancer de la Vessie au Togo : Aspects Diagnostiques Et ...

    African Journals Online (AJOL)

    Mots clés : cancer de la vessie, diagnostic, traitement ;. ABSTRACT. Cancer of the Bladder in Togo. Clinical and Management Aspects at the Teaching Hospital of Sylvanus Olympio. Objective: to describe the clinical and management features in patients followed for bladder cancer at the teaching hospital of Sylvanus ...

  14. The Experience of Staging Nijinsky's "L'Apres-Midi d'un Faune" in a Higher Education Dance Program

    Science.gov (United States)

    Curran, Tina

    2010-01-01

    This study documented the experiences of staging Vaslav Nijinsky's "L'Apres-midi d'un Faune" in a higher education dance program. The ballet was staged from Labanotation. Research questions focused on teaching and learning pedagogy, characterization of the process over time, experiences of the participants and teaching approaches. The project…

  15. Magnesium Cermets and Magnesium-Beryllium Alloys; Cermets au magnesium et au magnesium-beryllium; Metallokeramicheskie magnievye i magnievo-berillievye splavy; Cermets de magnesio y aleaciones de magnesio y berillio

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, V. E.; Zelenskij, V. F.; Fajfer, S. I.; Zhdanov, S. M.; Maksimenko, V. I.; Savchenko, V. I. [Fiziko-Tekhnicheskij Institut an USSR, Khar' kov, SSSR (Russian Federation)

    1963-11-15

    magnesium-beryllium alloys, with their enhanced high-temperature stability, are capable of finding extensive application in various branches of technology. (author) [French] Le memoire expose certains resultats relatifs au traitement des cermets au magnesium et oxyde de magnesium, ainsi que des alliages de magnesiumberyllium particulierement resistants a la chaleur, qui ont ete obtenus par les methodes de la metallurgie des poudres. Il suffit d'ajouter une quantite insignifiante d'oxyde de magnesium finement disperse pour accroitre la resistance a l'usure, laquelle augmente en fraction de cette quantite; il est vrai qu'en faisant varier la concentration de l'oxyde entre 0,3 et 5% en poids, on ne modifie que relativement peu la resistance maximum a court terme pour toute la gamme des temperatures considerees. Pour les cermets, on constate qu'a 20{sup o}C, {sigma}{sub {beta}} = 28 a 31 kg/mm{sup 2} et {delta} = 3,5 a 4,5%, tandis qu'a 500{sup o}C, {sigma}{sub {beta}} = 2,6 a 3,2 kg/mm{sup 2} et {delta} = 30 a 40%. L'effet positif de l'oxyde finement disperse se fait sentir surtout pendant les essais prolonges. Pour les cermets au magnesium, on trouve {sigma} (300)/100 = 2,2 kg/mm{sup 2}. Les cermets se caracterisent par la stabilite de leurs proprietes de resistance aux temperatures elevees, phenomene qui est lie avant tout a la stabilite thermodynamique de la phase oxyde. Grace aux methodes de la metallurgie des poudres, on a pu obtenir des alliages de magnesium-beryllium a forte concentration de beryllium, qui sont particulierement resistants a la chaleur (alliages PMB). D'apres leurs caracteristiques de resistance, les alliages PMB se rapprochent des cermets Mg-MgO; cependant, les alliages de magnesium-beryllium se distinguent par la stabilite et la duree de leur resistance a l'oxydation aux temperatures elevees, resistance qui est superieure a ce l le des cermets Mg-MgO actueUement connus. Ainsi, dans l'air, les alliages PMB contenant 2 a 5% de beryllium conservent a 580

  16. Collection and processing of information in biological kinetics studies with radioactive tracers; Collecte et traitement de l'information dans les etudes de cinetique biologique avec traceurs radioactifs

    Energy Technology Data Exchange (ETDEWEB)

    Remy, J; Lafuma, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    The authors present an automatic method for the collection and treatment of information in biological kinetics experiments using radioactive tracers. The recording are made without any time constant on magnetic tape. The information recorded is sampled by a 400 channel multi-scale analyzer and transferred to punched cards. The digital analysis is done by an I.B.M. computer. The method is illustrated by an example: the hepatic fixation of colloidal gold in the pig. Its advantages and requirements are discussed. In the appendix are given the FORTRAN texts for two programmes used in treating the example presented. (authors) [French] Les auteurs presentent une methode automatique de collecte et de traitement de l'information dans les experiences de cinetique biologique utilisant les traceurs radioactifs. Les enregistrements sont realises sans constante de temps sur bande magnetique. L'information enregistree fait l'objet d'un echantillonnage a l'aide d'un analyseur a 400 canaux en mode multi-echelle puis est transferee sur cartes perforees. L'exploitation digitale est confiee a un ordinateur I.B.M.. La methode est illustree par un exemple d'etude de la fixation hepatique de l'or colloidal chez le porc. Ses avantages et ses exigences sont discutes. En annexe figurent les textes en FORTRAN de deux programmes utilises pour le traitement de l'exemple cite. (auteurs)

  17. High-p$_{T}$ Tomography of d+Au and Au+Au at SPS, RHIC, and LHC

    CERN Document Server

    Vitev, I; Vitev, Ivan; Gyulassy, Miklos

    2002-01-01

    The interplay of nuclear effects on the p_T > 2 GeV inclusive hadron spectra in d+Au and Au+Au reactions at root(s) = 17, 200, 5500 GeV is compared to leading order perturbative QCD calculations for elementary p+p (p-bar+p) collisions. The competition between nuclear shadowing, Cronin effect, and jet energy loss due to medium-induced gluon radiation is predicted to lead to a striking energy dependence of the nuclear suppression/enhancement pattern in A+A reactions. We show that future d+Au data can used to disentangle the initial and final state effects.

  18. Homology modeling of dissimilatory APS reductases (AprBA of sulfur-oxidizing and sulfate-reducing prokaryotes.

    Directory of Open Access Journals (Sweden)

    Birte Meyer

    Full Text Available BACKGROUND: The dissimilatory adenosine-5'-phosphosulfate (APS reductase (cofactors flavin adenine dinucleotide, FAD, and two [4Fe-4S] centers catalyzes the transformation of APS to sulfite and AMP in sulfate-reducing prokaryotes (SRP; in sulfur-oxidizing bacteria (SOB it has been suggested to operate in the reverse direction. Recently, the three-dimensional structure of the Archaeoglobus fulgidus enzyme has been determined in different catalytically relevant states providing insights into its reaction cycle. METHODOLOGY/PRINCIPAL FINDINGS: Full-length AprBA sequences from 20 phylogenetically distinct SRP and SOB species were used for homology modeling. In general, the average accuracy of the calculated models was sufficiently good to allow a structural and functional comparison between the beta- and alpha-subunit structures (78.8-99.3% and 89.5-96.8% of the AprB and AprA main chain atoms, respectively, had root mean square deviations below 1 A with respect to the template structures. Besides their overall conformity, the SRP- and SOB-derived models revealed the existence of individual adaptations at the electron-transferring AprB protein surface presumably resulting from docking to different electron donor/acceptor proteins. These structural alterations correlated with the protein phylogeny (three major phylogenetic lineages: (1 SRP including LGT-affected Archaeoglobi and SOB of Apr lineage II, (2 crenarchaeal SRP Caldivirga and Pyrobaculum, and (3 SOB of the distinct Apr lineage I and the presence of potential APS reductase-interacting redox complexes. The almost identical protein matrices surrounding both [4Fe-4S] clusters, the FAD cofactor, the active site channel and center within the AprB/A models of SRP and SOB point to a highly similar catalytic process of APS reduction/sulfite oxidation independent of the metabolism type the APS reductase is involved in and the species it has been originated from. CONCLUSIONS: Based on the comparative

  19. Implementasi Automatic Packet Reporting System (APRS Untuk Paket Data Pemantauan dan PengukuranUntuk Paket Data Pemantauan dan Pengukuran

    Directory of Open Access Journals (Sweden)

    Arief Goeritno

    2016-03-01

    Full Text Available Telah dilakukan implementasi Automatic Packet Reporting System (APRS untuk paket data pemantauan dan pengukuran melalui tujuan penelitian, berupa: a penyetelan program aplikasi pada jaringan APRS dan b pengukuran terhadap penerimaan data berdasarkan kinerja sensor-sensor. Penyetelan program aplikasi APRS merupakan konfigurasi perangkat lunak untuk APRS yang akan digunakan pada stasiun penerimaan data APRS dengan program aplikasi yang biasa digunakan, yaitu hyperterminal dan UI-View 32. Pengukuran penerimaan data berdasarkan kinerja sensor yang dilakukan melalui proses perekaman pada stasiun penerimaan data APRS. Kinerja sensor-sensor akan diamati pada stasiun pengiriman dan data hasil pengamatan akan dapat diterima pada stasiun penerimaan secara real time. Program aplikasi berbasis hyperterminal dan UI View 32 telah berhasil melakukan proses handshaking antara Terminal Node Controller (TNC dan komputer, sehingga data telemetri dari stasiun pengiriman paket data dapat diterima di stasiun penerimaan. Data telemetri dapat diamati pada stasiun penerimaan dan dapat diperoleh secara real time dengan format: YB0LRB-11>BEACON,WIDE2-1 [05/18/2014 04:03:49]: : T#010,008,093,004,122,075. Notifikasi YB0LRB-11 merupakan stasiun pengiriman paket data telemetri, kemudian data tersebut akan diterima pada stasiun penerima YD1PRY dengan format: YD1PRY-2>APLPN,ARISS [05/18/2014 04:03:07]: : !06.30.37S/106.48.26E#. Notifikasi tersebut merupakan pengiriman informasi data posisi oleh stasiun YD1PRY untuk inisialisasi pada jaringan APRS. Stasiun YB0LRB-11 ketika mengirim paket data telemetri dengan format: YB0LRB-11>BEACON,WIDE2-1 [05/18/2014 04:00:49]: : T#001,004,035,005,122,075. Paket data dari stasiun YB0LRB yang dipancar ulang atau digipeater dengan format: YB0LRB-11>BEACON,YD1PRY-2,WIDE2* [05/18/2014 04:00:50]: : T#001,004,035,005,122,075. Sensor pengukuran berkinerja relatif stabil, walaupun terdapat nilai simpangan pengukuran sebesar 1 cm atau

  20. Moderniser la démarche visant la qualité de l'eau au Brésil | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    20 sept. 2017 ... Après la rupture d'un grand barrage au sud-est du Brésil, des déchets métalliques et de boue contaminèrent l'eau et causèrent la pire catastrophe écologique de l'histoire de la nation. La recherche d'Adalto Bianchini aide son pays à réviser sa règlementation relative à une de ses ressources les plus ...

  1. Profil épidémiologique de l'infection à VIH au cours d'une campagne de sensibilisation à Yaoundé au Cameroun

    Science.gov (United States)

    Mbopi-Keou, Francois-Xavier; Nguefack-Tsague, Georges; Kalla, Ginette Claude Mireille; Viche, Lade; Noubom, Michel

    2013-01-01

    Introduction L'objectif de ce travail était de déterminer le profil épidémiologique de l'infection à VIH/SIDA au cours d'une campagne de sensibilisation à Yaoundé au Cameroun. Méthodes Après avoir obtenu le consentement éclairé des participants, le dépistage de l'infection par le VIH a été effectué selon l'algorithme de dépistage en série de l'Organisation Mondiale de la Santé (OMS). En outre, un questionnaire socio-comportemental a été proposé à chaque participant. Résultats Au total, 911 personnes ont été dépistées. La prévalence de l'infection par le VIH était de 2.6%. Elle était 3 fois plus élevée parmi les femmes (RC = 3.22, IC (1.26 - 8.18). Les prévalences les plus élevées ont été observées chez les personnes de plus de 45 ans (p = 0.01), les personnes sans emploi (p VIH en ciblant davantage des groupes particuliers tels que les élèves, les personnes âgées et les veufs/veuves, tout en recherchant les facteurs pouvant favoriser la propagation de l'infection dans ces groupes. PMID:24255725

  2. Progress of Design Improvements for APR1400 Computerized Procedure System from HFE V and V results and Design Experience

    International Nuclear Information System (INIS)

    Lee, Sungjin; Seong, Nokyu

    2015-01-01

    This study shows major already improved design features from the above three processes and a design proposal for to-be-improving items. APR1400 CPS has been verified and validated by the HFE process, internal design review and site acceptance tests. APR1400 Computerized Procedure System (CPS) has been applied to Shin-Kori Nuclear Power Plant (SKN) 3 and 4 units, Shin-Hanul Nuclear Power Plant (SHN) 1 and 2 units and Baraka Nuclear Power Plant (BNPP) 1, 2, 3 and 4 units. Since APR1400 CPS is a first-of-a-kind (FOAK) human machine interface (HMI) for executing a computerized procedure in the nuclear power plant's main control room in South Korea, it has been continuously improved through a) the human factor engineering (HFE) verification and validation (V and V), b) the internal design review and c) prototype tests. Human engineering discrepancies (HEDs) can be identified by the HFE V and V activity. Some HEDs of APR1400 CPS for SKN 3 and 4 and SHN 1 and 2 have been adopted as a role of design improvement in the CPS system while others were regarded as an operator training requirement or part of task contents. Various requests for improving the CPS have been collected from those results. A HMI system should be improved continuously for removing potential defects. Some of introduced design features in this paper has been adopted for APR1400 nuclear power plants. Some of them are under the review in the CPS design team of KHNP

  3. Configuration dependent deformation in 183Au

    International Nuclear Information System (INIS)

    Joshi, P.; Kumar, A.; Govil, I.M.; Mukherjee, G.; Singh, R.P.; Muralithar, S.; Bhowmik, R.K.

    1998-01-01

    The lifetime measurements in 183 Au nucleus were carried in order to probe the deformation properties of the band built on the i 3/2 and h 9/2 configurations. The nucleus of 183 Au was populated using a reaction 28 Si( 159 Tb,4n) 183 Au at a beam energy of 140 MeV. Lifetime measurements were carried out using Recoil Distance Measurements (RDM) method

  4. New Information Processing Techniques for Military Systems (les Nouvelles techniques de traitement de l’information pour les systemes militaires)

    Science.gov (United States)

    2001-04-01

    généralement nécessite le déploiement d’une ou de plusieurs bouées fonctionnant sur piles pour fournir une passerelle au nœud terrestre . Les conditions...diskreter Prozesse. In Proc. of VDI/ VDE GMA KongreJ Me& und Automa- tisierungstechnik, 1998. [2] A. Biere, A. Cimatti, E. Clarke, and Y. Zhu. Sym- bolic

  5. Study of the Plugging of Oil Well Sand Control Area in a Polymer Flooding Region Étude du colmatage aux abords des puits d’injection dans un réservoir d’hydrocarbure produit par balayage au polymère

    Directory of Open Access Journals (Sweden)

    Liu Dong

    2012-05-01

    fines contribuent également au colmatage. Une étude expérimentale de dégradation du polymère a été réalisée sur carotte et deux types d’agents décolmatants, le persulfate de potassium et le thiosulfate de sodium, ont été sélectionnés et testés. Il a été montré que ces deux agents pouvaient dégrader les substances à l’origine du colmatage et permettaient de recouvrer efficacement la perméabilité du milieu poreux. En outre, des tests d’application de tels traitements ont été menés sur le champ pétrolier de Gudao; ils ont permis de démontrer une restauration des performances sur différents puits. Ces tests ont aussi montré une diminution sensible de la pression d’injection et une forte augmentation de la production liquide journalière après l’application de ces agents décolmatants dans la zone de contrôle de venue de sable.

  6. Predicted Habitat Suitability for Montipora Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Montipora in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  7. Predicted Habitat Suitability for Porites in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Porites in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  8. Predicted Habitat Suitability for Leptoseris Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Leptoseris in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  9. Predicted Habitat Suitability for Leptoseris in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Leptoseris in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  10. Predicted Habitat Suitability for All Mesophotic Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for all mesophotic corals in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to...

  11. Synthesis of nir-sensitive Au-Au{sub 2}S nanocolloids for drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Ren, L.; Chow, G.M

    2003-01-15

    Near IR (NIR) sensitive Au-Au{sub 2}S nanocolloids were prepared by mixing HAuCl{sub 4} and Na{sub 2}S in aqueous solutions. An anti-tumor drug, cis-platin, was adsorbed onto Au-Au{sub 2}S nanoparticle surface via the 11-mercaptoundecanoic acid (MUA) layers. The results show that the degree of adsorption of cis-platin onto Au-Au{sub 2}S nanoparticles was controlled by the solution pH value, and the drug release was sensitive to near-infrared irradiation. The cis-platin-loaded Au-Au{sub 2}S nanocolloids can be potentially applied as NIR activated drug delivery carrier.

  12. Successful synthesis and thermal stability of immiscible metal Au-Rh, Au-Ir andAu-Ir-Rh nanoalloys

    Science.gov (United States)

    Shubin, Yury; Plyusnin, Pavel; Sharafutdinov, Marat; Makotchenko, Evgenia; Korenev, Sergey

    2017-05-01

    We successfully prepared face-centred cubic nanoalloys in systems of Au-Ir, Au-Rh and Au-Ir-Rh, with large bulk miscibility gaps, in one-run reactions under thermal decomposition of specially synthesised single-source precursors, namely, [AuEn2][Ir(NO2)6], [AuEn2][Ir(NO2)6] х [Rh(NO2)6]1-х and [AuEn2][Rh(NO2)6]. The precursors employed contain all desired metals ‘mixed’ at the atomic level, thus providing significant advantages for obtaining alloys. The observations using high-resolution transmission electron microscopy show that the nanoalloy structures are composed of well-dispersed aggregates of crystalline domains with a mean size of 5 ± 3 nm. Еnergy dispersive x-ray spectroscopy and x-ray powder diffraction (XRD) measurements confirm the formation of AuIr, AuRh, AuIr0.75Rh0.25, AuIr0.50Rh0.50 and AuIr0.25Rh0.75 metastable solid solutions. In situ high-temperature synchrotron XRD (HTXRD) was used to study the formation mechanism of nanoalloys. The observed transformations are described by the ‘conversion chemistry’ mechanism characterised by the primary development of particles comprising atoms of only one type, followed by a chemical reaction resulting in the final formation of a nanoalloy. The obtained metastable nanoalloys exhibit essential thermal stability. Exposure to 180 °C for 30 h does not cause any dealloying process.

  13. Analysis of steam condensation in APR1400 IRWST for loss of coolant accident

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Young Suk

    2006-02-15

    The In-Containment Refueling Water Storage Tank (IRWST) of APR1400 is installed at the bottom of containment building to promote the plant safety functions during an accident. This design feature brings about uncertainty factors which may necessitate conventional prediction of temperature and pressure of containment building improved or revised when an accident occurs. The hot steam which is released from RCS break enters the IRWST through four Pressure Relief Dampers (PRDs). It is expected to be condensed with water stored in IRWST, in which water is colder than incoming steam. The purpose of this study is to investigate the influence of IRWST and pressure relief damper on back pressure and temperature in APR1400 containment codes such as CONTEMPT-LT and GOTHIC. The comparison of codes showed that GOTHIC code be more appropriate for the prediction of containment pressure and temperature under the condition of steam condensation occurring in confined water pool. Especially, the GOTHIC has superior capability to treat multi-compartmentalized geometry This study developed one-compartment (single) model, two-compartment (separated) model, and three-dimension (3-D) model, respectively. Two compartment model separates the IRWST from the other containment compartments. In 3-D model, only the IRWST is nodalized with Cartesian modeling. The single model is developed for comparison with two-compartment model which can analyze PRD's influence. The separated model for predicting PRD's influence divides the space between containment and IRWST. 3-D model for IRWST was generated because it is not symmetric considering location of sparger, pump, and suction sump. Therefore, IRWST is simulated with not only detailed three-dimensional behavior but also independent flow paths for four PRDs. Many experimental studies for the direct-contact heat transfer in stratified steam water flows, cocurrent or countercurrent, have been performed (Segev et al., 1981; Lim et al., 1981

  14. Analysis of Hydrogen Concentration Distribution during an SBO Accident for Shin-Ulchin APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jongtae; Hong, Seong Wan [Korea Atomic energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    To prohibit the accumulation of hydrogen, the containment volume is considered to reduce the hydrogen concentration, or hydrogen mitigation devices such as PARs or igniters are installed in the containment. In the case of the Fukushima NPPs, the applied strategy for the hydrogen safety is the use of a containment venting system (CVS). In this way, the hydrogen accumulated in the containment vessel is vented into the environment. One of the causes of the hydrogen explosions occurring in the containment buildings of the Fukushima NPPs is expected to be the failure of the venting system. The hydrogen was therefore easily accumulated in the containment building. It is uncertain what the ignition source for the hydrogen combustion was during the accident. However, it is not too conservative to assume that an ignition source exists at any time and any place in a containment during a core-melt accident. Shin-Ulchin 1 and 2, which are construction plants of an APR 1400, are two of the newest NPPs in Korea. They have many features to enhance the safety margin during a design-based and beyond-design-based accident. One of them is the in-containment refueling water storage tank (IRWST) located inside the containment. It is used as a sink/source for feed-bleed operation. When the core is damaged along an accident progression, the hydrogen generated in the RPV can be released into the IRWST of the APR1400 with steam and water. From a previous study, it was found that a highly concentrated hydrogen/air mixture can be developed if the hydrogen is released into the IRWST. In the case of Shin-Ulchin 1 and 2, the hydrogen mitigation strategy during a high-pressure accident such as a station blackout (SBO) is changed by installing a 3-way valve. When a severe accident management (SAM) for the plant is initiated, the flow path from a pressurizer to the IRWST is changed into a steam-generator (S/G) compartment by turning the 3-wat valve actively (pilot operated). By doing so, it is

  15. Comparison of serpent and triton generated FEW group constants for APR1400 nuclear reactor core

    International Nuclear Information System (INIS)

    Elsawi, Mohamed A.; Alnoamani, Zainab

    2015-01-01

    The accuracy of full-core reactor power calculations using diffusion codes is strongly dependent on the quality of the homogenized cross sections and other few-group constants generated by lattice codes. For many years, deterministic lattice codes have been used to generate these constants using different techniques: the discrete ordinates, collision probability or the method of characteristics, just to name a few. These codes, however, show some limitations, for example, on complex geometries or near heavy absorbers as in modern pressurized water reactor (PWR) designs like the Korean Advanced Power Reactor 1400 (APR1400) core. The use of continuous-energy Monte Carlo (MC) codes to produce nuclear constants can be seen as an attractive option when dealing with fuel or reactor types that lie beyond the capabilities of conventional deterministic lattice transport codes. In this paper, the few-group constants generated by two of the state-of-the-art reactor physics codes, SERPENT and SCALE/TRITON, will be critically studied and their reliability for being used in subsequent diffusion calculations will be evaluated. SERPENT is a 3D, continuous-energy, Monte Carlo reactor physics code which has a built-in burn-up calculation capability. It has been developed at the Technical Research Center of Finland (VTT) since 2004. SCALE/TRITON, on the other hand, is a control module developed within the framework of SCALE package that enables performing deterministic 2-D transport calculations on nuclear reactor core lattices. The approach followed in this paper is as follows. First, the few-group nuclear constants for the APR1400 reactor core were generated using SERPENT (version 2.1.22) and NEWT (in SCALE version 6.1.2) codes. For both codes, the critical spectrum, calculated using the B1 method, was used as a weighting function. Second, 2-D diffusion calculations were performed using the US NRC core simulator PARCS employing the two few-group constant sets generated in the first

  16. Analysis of steam condensation in APR1400 IRWST for loss of coolant accident

    International Nuclear Information System (INIS)

    Oh, Young Suk

    2006-02-01

    The In-Containment Refueling Water Storage Tank (IRWST) of APR1400 is installed at the bottom of containment building to promote the plant safety functions during an accident. This design feature brings about uncertainty factors which may necessitate conventional prediction of temperature and pressure of containment building improved or revised when an accident occurs. The hot steam which is released from RCS break enters the IRWST through four Pressure Relief Dampers (PRDs). It is expected to be condensed with water stored in IRWST, in which water is colder than incoming steam. The purpose of this study is to investigate the influence of IRWST and pressure relief damper on back pressure and temperature in APR1400 containment codes such as CONTEMPT-LT and GOTHIC. The comparison of codes showed that GOTHIC code be more appropriate for the prediction of containment pressure and temperature under the condition of steam condensation occurring in confined water pool. Especially, the GOTHIC has superior capability to treat multi-compartmentalized geometry This study developed one-compartment (single) model, two-compartment (separated) model, and three-dimension (3-D) model, respectively. Two compartment model separates the IRWST from the other containment compartments. In 3-D model, only the IRWST is nodalized with Cartesian modeling. The single model is developed for comparison with two-compartment model which can analyze PRD's influence. The separated model for predicting PRD's influence divides the space between containment and IRWST. 3-D model for IRWST was generated because it is not symmetric considering location of sparger, pump, and suction sump. Therefore, IRWST is simulated with not only detailed three-dimensional behavior but also independent flow paths for four PRDs. Many experimental studies for the direct-contact heat transfer in stratified steam water flows, cocurrent or countercurrent, have been performed (Segev et al., 1981; Lim et al., 1981; Kim and

  17. Best-estimated multi-dimensional calculation during LB LOCA for APR1400

    International Nuclear Information System (INIS)

    Oh, D. Y.; Bang, Y. S.; Cheong, A. J.; Woong, S.; Korea, W.

    2010-01-01

    Best-estimated (BE) calculation with uncertainty quantification for the emergency core cooling system (ECCS) performance analysis during Loss of Coolant Accident (LOCA) is more broadly used in nuclear industries and regulations. In Korea, demand on regulatory audit calculation is continuously increasing to support the safety review for life extension, power up-rating and advanced nuclear reactor design. The thermal-hydraulic system code, MARS (Multi-dimensional Analysis of Reactor Safety), with multi-dimensional capability is used for audit calculation. It achieves to describe the complicated phenomena in reactor coolant system by very effectively consolidating the one dimensional RELAP5/MOD3 with the multidimensional COBRA-TF codes. The advanced power reactors (APR1400) to be evaluated has four separated hydraulic trains of the high pressure injection system (HPSI) with direct vessel injection (DVI) which is different from the existing commercial PWRs. Also, the therma-hydraulic behavior of DVI plant would be considerably different from that of a cold-leg safety injection since the low pressure safety injection system are eliminated and the high pressure safety flow are injected into the specific elevation of reactor vessel downcomer. The ECCS bypass induced by the downcomer boiling due to hot wall heating of reactor vessel during reflooding phase is one of the important phenomena which should be considered in DVI plants. Therefore, in this study, BE calculation with one-dimensional (1-D) and multi-dimensional (multi-D) MARS models during LBLOCA are performed for APR1400 plant. In the multi-D evaluation, the reactor vessel is modeled by multi-D components and the specific treatment of flow path inside reactor vessel, e.g., upper guide structure, is essential. The concept of hot zone is adopted to simulate the limiting thermal-hydraulic conditions surrounding hot rod, which is similar to hot channel in 1-D. Also, alternative treatment of the hot rods in multi-D is

  18. Measurement techniques of local parameters in the downcomer boiling experiment of APR1400

    International Nuclear Information System (INIS)

    Lee, Eu Hwak

    2004-02-01

    In order to investigate boiling phenomena experimentally in the downcomer during LBLOCA with Direct Vessel Injection (DVI), which is a new Safety Injection System (SIS) of Advanced Power Reactor 1400 MW (APR1400), several parameters should be measured through the verification of their applicability. In this study, measurement techniques of the parameters are developed for the downcomer boiling experiment; local phase velocities, local void fraction and heat flux from the heated wall. The experiment has been performed with the heated wall, which has a thickness of 8.2 cm and a height of 32.5 cm and made of the same material as the prototype (APR1400) with chrome coating against rusting. The newly developed pitot tube is applied to the measurement of local liquid velocity and its calibration curve is obtained experimentally with the consideration of the effect according to water temperature and hole size changes. The developed pitot tube measures the local liquid velocity with 0.69 % deviation and it is confirmed that the water temperature and geometrical change does not affect the calibration curve. The high-speed camera and commercial software are used to measure the local vapor velocity with the accuracy of 0.06 m/sec per pixel and the procedure is confirmed in the present study. It turns out that the vapor velocity is insensitive to void size. High-speed camera and image processing are used to measure the local void fraction with the determined intensity criterion for distinguishing each phase and the results are compared with the bulk void fraction by differential pressure transmitters. In the actual experiment, the developed method is applied successfully and the results show that the criterion of intensity has little effect on local void fraction. And, it is observed that the tendency between the measured local and bulk void faction is maintained with time. In order to measure heat flux from the heated wall, two heat flux measurement techniques are developed

  19. Apreçamento de opções de IDI usando o modelo CIR

    Directory of Open Access Journals (Sweden)

    José Santiago Fajardo Barbachan

    2003-06-01

    Full Text Available A opção de IDI da BM&F possui características peculiares que torna o seu apreçamento diferente das opções de taxa de juros mais comuns, como as de títulos de renda fixa. Este artigo desenvolve uma fórmula para apreçamento dessas opções de IDI, utilizando a precificação livre de arbitragem. O modelo utilizado considera apenas um fator estocástico: a taxa de juros livre de risco de curto prazo. A equação diferencial usada para modelar o comportamento da taxa de juros é a do modelo CIR (COX INGERSOLL & ROSS, 1985, que possui reversão à média e não permite a existência de taxas de juros nominais negativas. Também é feita uma estimação dos parâmetros do modelo proposto baseando-se em dados históricos, para então comparar o preço teórico da opção baseado nestes parâmetros com os preços de mercado e com o preço teórico considerando a modelagem de Vasicek (1977.The IDI option from the BM&F (Commodities and Futures Exchange has unusual characteristics, that make its pricing different from common interest rate options. This paper develops a closed form formula for the pricing of these IDI options, using an arbitrage-free pricing approach. The model used considers only one stochastic factor: the short-term risk-free interest rate. The differential equation used to model the behavior of the interest rate comes from the CIR (COX INGERSOLL & ROSS, 1985 model, which has mean reversion property and does not allow negative nominal interest rates. It is also done a parameter estimation of the proposed model based on historic data, and then compares the theoretical price of the option based on these parameters with the market price and with the theoretical price considering the Vasicek (1977 model.

  20. Contrôle du marché informel à l’heure de la mondialisation des échanges. Le cas des antirétroviraux au Chili

    Science.gov (United States)

    Brousselle, Astrid; Morales, Cristián

    2013-01-01

    Résumé Les nouveaux médicaments pour le VIH/sida ont créé des besoins d’accessibilité aux traitements que les gouvernements n’ont pas toujours réussi à couvrir. Il en résulte l’émergence d’un marché informel des ARV. Par l’analyse de la situation au Chili, nous traitons des différents créneaux d’approvisionnement, des conséquences de l’existence d’un tel marché, ainsi que des moyens envisageables pour réduire les effets indésirables. Les aspects tant microéconomiques que macroéconomiques concernant le marché et l’accessibilité aux médicaments sont abordés. PMID:23997580

  1. Le bestiaire au dix-neuvième siècle. Animalité, pauvreté et criminalité dans Les mystères de Paris

    Directory of Open Access Journals (Sweden)

    Nigel Lezama

    2015-12-01

    Full Text Available Cet article présente le contexte épistémologique de la question animale au dix-neuvième siècle et interroge la façon dont le feuilleton d’Eugène Sue, Les Mystères de Paris, déploie la figure animale dans la mise en scène des marginaux. Bien qu’une telle peinture risque de nuire à l’animal par le biais d’un positivisme qui le réifie, le feuilleton trouve un moyen d’énoncer un nouvel argument contre la souffrance animale tout en soulignant la nécessité de réfléchir aux grands problèmes sociaux et à leur résolution par le biais du traitement des animaux.

  2. The Electronic Properties and L3 XANES of Au and Nano-Au

    International Nuclear Information System (INIS)

    Yiu, Y.M.; Zhang, P.; Sham, T.K.

    2004-01-01

    The electronic properties of Au crystal and nano Au have been investigated by theory and experiment. Molecularly capped nano-Au was synthesized using the two-phase method. Au nano-particles have been characterized by X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM). They retain the fcc crystal structure. Their sizes have been determined to be in a range from 5.5 nm to 1.7 nm. The L3 X-ray Absorption Near Edge Structure (XANES) of nano-Au and Au foil have been recorded using synchrotron radiation, and examined by theoretical calculation based on the first principles. Both theory and experiment show that the nano-Au particles have essentially all the Au L3 XANES features of bulk Au in the near edge region with less pronounced resonance peaks. It is also shown that nano Au exhibits lower 4f binding energy than bulk Au in good agreement with quantum confined Au systems reported previously.

  3. Numerical Analysis of Molten Corium Dispersion during Hypothetical High-Pressure Accidents in APR1400 Nuclear Power Plant

    International Nuclear Information System (INIS)

    Kim, Jong Tae; Ha, Kwang Soon; Kim, Sang Baik; Kim, Hee Dong; Jeong, Jae Sik

    2010-01-01

    During a hypothetical high-pressure accident in a nuclear power plant (NPP), molten corium can be ejected through a breach of a reactor pressure vessel (RPV) and dispersed by the following jet of a high pressure steam in the RPV. The dispersed corium is fragmented into smaller droplets in a reactor cavity of the NPP by the steam jet with very high velocity and is released into the upper compartment of the NPP by an overpressure in the cavity. The heat-carrying fragments of the corium transfer the thermal energy to the ambient air in the containment and react chemically with steam and generate hydrogen which may be burnt in the containment. The thermal loads from the ejected molten corium on the containment which is called direct containment heating (DCH) can threaten the integrity of the containment. New generation NPPs such as APR1400 and EPR have been designed in consideration of reducing the possibility of the containment failure from the DCH. In order for that, APR1400 has a convolute-type corium chamber connected to the reactor cavity. In the case of EPR, severe-accident dedicated depressurization valves are installed to preclude a high pressure melt ejection (HPME). DCH in a NPP containment is related to many physical phenomena such as multi-phase hydrodynamics, thermodynamics and chemical reaction. In the evaluation of the DCH load, the melt dispersion rates depending on the RPV pressure are the most important parameter. Mostly, DCH was evaluated by using lumped-analysis codes with some correlations obtained from experiments for the dispersion rates. The corium dispersion rates for many types of the NPP containments had been obtained by experiments in 90s. And some correlations from the experimental data were developed. As mentioned above, APR1400 has a corium chamber to reduce the corium dispersion rate. But there is no experimental data for the dispersion rate specific to the APR1400 cavity geometry. So its performance for capturing of the dispersed corium

  4. Le pouvoir au féminin dans la Castille médiévale : une deuxième voie ?

    Directory of Open Access Journals (Sweden)

    Emmanuelle Klinka

    2006-07-01

    Full Text Available Comment définir le lien entre femme et pouvoir dans les anciens royaumes de Castille et León ? Y a-t-il un exercice spécifique du pouvoir par les femmes ? Les chroniques n’en offrent qu’une vision très lacunaire et la Chronica Adefonsi Imperatoris en est un exemple intéressant du fait même de l’a priori idéologique qui préside à sa composition. Je me suis donc intéressée au traitement particulier que cette chronique réserve au protagonisme féminin.¿Cómo definir el vínculo entre mujer y poder en los antiguos reinos de Castilla y León? ¿Existe un ejercicio del poder por las mujeres? Sólo ofrecen las crónicas una visión muy lagunosa y la Chronica Adefonsi Imperatoris es un interesante ejemplo por el a priori ideológico que rige su composición. Me interesé pues por el particular tratamiento que esta crónica reserva al protagonismo femenino.

  5. Application of the risk-informed methodology for APR1400 P-T limits curve

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.; Namgung, I. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-07-01

    A reactor pressure vessel (RPV) in a nuclear power plant has operational limits of pressure and temperature to prevent a potential drastic propagation of cracks due to brittle fracture. We call it a pressure-temperature limits curve (P-T limits curve). Appendix G of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, provides deterministic procedures to develop the P-T limits curve for the reactor pressure vessel. Recently, an alternative risk-informed methodology has been added in the ASME Code. Risk-informed means that we can consider insights from a probabilistic risk assessment by using this methodology. This alternative methodology provides a simple procedure to develop risk-informed P-T limits for heat up, cool down, and hydrostatic test events. The risk-informed P-T limits curve is known to provide more operational flexibility, particularly for reactor pressure vessels with relatively high irradiation levels and radiation sensitive materials. In this paper, we developed both the deterministic and a risk-informed P-T limits curve for an APR1400 reactor using Appendix G of the ASME Code, Section XI and compare the results in terms of additional operational margin. (author)

  6. Modeling of melt retention in EU-APR1400 ex-vessel core catcher

    Energy Technology Data Exchange (ETDEWEB)

    Granovsky, V. S.; Sulatsky, A. A.; Khabensky, V. B.; Sulatskaya, M. B. [Alexandrov Research Inst. of Technology NITI, Sosnovy Bor (Russian Federation); Gusarov, V. V.; Almyashev, V. I.; Komlev, A. A. [Saint Petersburg State Technological Univ. SPbSTU, St.Petersburg (Russian Federation); Bechta, S. [KTH, Stockholm (Sweden); Kim, Y. S. [KHNP, 1312 Gil 70, Yuseongdaero, Yuseong-gu, Daejeon (Korea, Republic of); Park, R. J.; Kim, H. Y.; Song, J. H. [KAERI, 989 Gil 111, Daedeokdaero, Yuseong-gu, Daejeon (Korea, Republic of)

    2012-07-01

    A core catcher is adopted in the EU-APR1400 reactor design for management and mitigation of severe accidents with reactor core melting. The core catcher concept incorporates a number of engineering solutions used in the catcher designs of European EPR and Russian WER-1000 reactors, such as thin-layer corium spreading for better cooling, retention of the melt in a water-cooled steel vessel, and use of sacrificial material (SM) to control the melt properties. SM is one of the key elements of the catcher design and its performance is critical for melt retention efficiency. This SM consists of oxide components, but the core catcher also includes sacrificial steel which reacts with the metal melt of the molten corium to reduce its temperature. The paper describes the required properties of SM. The melt retention capability of the core catcher can be confirmed by modeling the heat fluxes to the catcher vessel to show that it will not fail. The fulfillment of this requirement is demonstrated on the example of LBLOCA severe accident. Thermal and physicochemical interactions between the oxide and metal melts, interactions of the melts with SM, sacrificial steel and vessel, core catcher external cooling by water and release of non-condensable gases are modeled. (authors)

  7. Development of a Desktop Simulator for APR1400 Nuclear Power Plant

    International Nuclear Information System (INIS)

    Lee, J. B.

    2016-01-01

    It is essential for utilities to possess a full-scope simulator for operator training and operation test for operators. But it is very expensive and sometimes lack of fidelity if processes of developing the simulator and designing the plant are in parallel. It is due to the situation that simulator development stage sometimes precedes the plant design stage and modifications may occur to the design of the plant in construction stage. In an attempt to build a low cost and efficient simulator, a desktop simulator has been developed. This model is described herein. Using desktop simulators for training operators is an efficient method for familiarizing operators with their plant’s operation. A low cost and efficient desktop simulator for APR1400 has been developed, and brief features are introduced here. It is configured to mimic a full-scale simulator, and can be used for operators to be familiarized to their plant’s operation. Since the size of the simulator is small enough to be fit in a desk, it can be used in a classroom or in an office at any time. It can also be used to evaluate design changes or modifications of the plant before implementing them to the plant

  8. Consolidation and Decomposition of APR1400 NRC Design Certification Processes for Collaborative and Accelerated Processing

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Young Chul [FNC Technology Co., Yongin (Korea, Republic of); Kang, Deog Ji [KNHP, Daejeon (Korea, Republic of)

    2016-05-15

    KEPCO and KHNP are conducting APR1400 Design Certification from NRC. For the proper management of processes and information, a system called RIS (Regulatory Information management System) has been implemented by FNC from 2014, and it is on the final stage. In retaining the certification from NRC, RIS will be a very essential role by providing platform for collaborative and accelerated processing of responses to RAI (Request of Additional Information). Preparation of responses to RAI with this kind of systematic approach may be the first in the world. Westinghouse is doing manually and using MS Excel to collect the processing status. Where as, RIS will enable each member can do his own job and collect the status automatically. In this paper, how collaborative and accelerated processing of responses to RAI can be enabled will be described, and further enhancements will also be discussed. It handles MS Word directory with the help of VSTO. And with the help of Aspose.Total for .NET, the prepared response to RAI meets NRC's requirements. Through some further work and direct integration with requirement management solution, RIS can be expanded to cover a prior impact notice in case of DCD being altered.

  9. Evaluation on thermal-hydraulic characteristics for passive safety device of APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Seong Yeon; Lee, S. H.; Son, M. K. [Korea Association for Nuclear Technology, Taejon (Korea, Republic of); Jee, M. S.; Chung, M. H. [Chungnam National Univ., Taejon (Korea, Republic of)

    2001-07-15

    To establish evaluation and verification guideline for the APR1400, thermal-hydraulic characteristics for fuel rod bundle, reactor vessel and fluidic device is analyzed using FLUENT. Scope and major results of research are as follows : Thermal-hydraulic characteristics for nuclear fuel rod bundle: design data for nuclear fuel rod bundle and structure are surveyed, and 3 x 3 sub-channel model is adopted to investigate the fluid flow and heat transfer characteristics in fuel rod bundle. Computational results are compared with the heat transfer data measured by naphthalene sublimation method, and numerical analysis and evaluation are performed at various design conditions and flow conditions. Thermal-hydraulic characteristics for reactor vessel: reactor vessel design data are surveyed to develop numerical model. Porous media model is applied for fuel rod bundle, and full-scale, three dimensional simulation is performed at actual operating conditions. Distributions of velocity, pressure and temperature are discussed. Flow characteristics for fluidic device: three dimensional numerical model for fluidic device is developed, and numerical results are compared with experimental data obtained at KAERI in order to verify numerical simulation. In addition, variation of flow rate is investigated at various elapsed times after valve operating, and flow characteristics is analyzed at low and high flow rate conditions, respectively.

  10. Conceptual design of passive containment cooling system with air holdup tanks of improved APR+

    International Nuclear Information System (INIS)

    Jeon, Byong Guk; Cheon No, Hee

    2014-01-01

    In Korea, after the successful validation of passive auxiliary feedwater system (PAFS), a passive containment cooling system (PCCS) gets attention for future development. We suggested PCCS design based on APR+, an advanced PWR developed in Korea, and performed scoping analysis. On the extension of the simple scoping analysis, MARS simulation is performed to incorporate the behavior of water pool outside the containment as well as steam-air mixture inside the containment. Through the simulation we demonstrated the effectiveness of the air holdup tank (AHT). Also we investigated the effect of the models of heat transfer coefficients between steam-air mixture side and water side, and flow instability inside HX tubes. The presence of AHT enables us to reduce the number of required HX tubes more than half through an increase in the heat transfer coefficients due to the reduction of air fraction in the containment. Finally flow instability was observed and mitigated by putting orifice plates at the inlet of tubes, increasing height of return nozzle, and increasing a tube angle. (authors)

  11. Improved Design of PECS to reduce Flow Instability for EU-APR1400

    International Nuclear Information System (INIS)

    Hwang, Do Hyun; Lee, Keunsung

    2014-01-01

    For EU-APR1400, PECS (Passive Ex-vessel corium retaining and Cooling System), so-called core catcher, was adopted to keep the integrity of basemat in containment by preventing MCCI (Molten Core Concrete Interaction) through retaining core debris and cooling corium outside the reactor vessel. In this paper, the improved design of PECS is presented to increase coolability by reducing flow instability in the region of cooling channel. In this paper, flow instability analysis was carried out using CFD code to find out the most improved design of PECS, which is to increase coolability by reducing bubble entrainment in the region of cooling channel. The reduction of bubble entrainment in the downcomer facilitates higher mass flow rates in the downcomer. Among presented four designed for the downcomer of PECS, the superstep design shows the highest mass flow rate and the lowest gas holdup in the downcomer as well as in the cooling channel. Compared with the existing design, the elimination of the horizontal part and the addition of an extra space above the vertical entrance to the downcomer seem to help the separation of the vapor

  12. Development of Alarm System link Drawing for Operation Support for APR1400 Digital Main Control Room

    International Nuclear Information System (INIS)

    Kim, Ki-Hwan

    2016-01-01

    Digitalized MMI(Man-Machine Interface) including Digital Main Control Room(MCR) and digital I and C system was being applied for SKN 3 and 4 Nuclear Power Plant(NPP) and subsequent APR1400 NPP type. But, operators can not easily find instrument for alarm immediately. Therefore, Alarm system is required to easily find instrument for Alarm. For this implementation, we will plan system design considering design feature without affecting network load and CPU load. We have developed Alarm system link drawing for digital MCR. Operators of the digitalized MCR navigates from their consoles to the drawings related to the plant alarms and their instruments or the operation status. Such method gives cognitive load to the operators having to travel to different locations in finding the related information. Screen Sharing System, which is the fundamental technique for Drawing Interconnection Alarm System is close to completion, and it should be functionally tested and verified by the human factor engineering. For the actual application to the operating plants, the drawings to be interconnected to the alarms and the opinions from the operators/maintenance departments for designating alarm number should be surveyed, Also, another function that allows the access to the alarm related drawings not only from the MCR but also from the other offices

  13. Development of Alarm System link Drawing for Operation Support for APR1400 Digital Main Control Room

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ki-Hwan [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    Digitalized MMI(Man-Machine Interface) including Digital Main Control Room(MCR) and digital I and C system was being applied for SKN 3 and 4 Nuclear Power Plant(NPP) and subsequent APR1400 NPP type. But, operators can not easily find instrument for alarm immediately. Therefore, Alarm system is required to easily find instrument for Alarm. For this implementation, we will plan system design considering design feature without affecting network load and CPU load. We have developed Alarm system link drawing for digital MCR. Operators of the digitalized MCR navigates from their consoles to the drawings related to the plant alarms and their instruments or the operation status. Such method gives cognitive load to the operators having to travel to different locations in finding the related information. Screen Sharing System, which is the fundamental technique for Drawing Interconnection Alarm System is close to completion, and it should be functionally tested and verified by the human factor engineering. For the actual application to the operating plants, the drawings to be interconnected to the alarms and the opinions from the operators/maintenance departments for designating alarm number should be surveyed, Also, another function that allows the access to the alarm related drawings not only from the MCR but also from the other offices.

  14. The Development and Evaluation of Inherent RPCS for the APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae D.; Ryu, Seok H.; Jung, Dong C.; Kim, Joon S.; Baek, Byung C.; Sung, Song K.; You, Guk J. [KNF, Daejeon (Korea, Republic of); Kim, Han G. [KHNP, Daejeon (Korea, Republic of); Chi, Sung G. [KOPEC, Daejeon (Korea, Republic of)

    2008-10-15

    The APR1400 RPCS (Reactor Power Cutback System) is designed to rapidly reduce the core power to eliminate the need for a reactor trip following a large load rejection or a loss of two main feedwater pumps at high power. GDC (General Design Criteria) 25 says 'Protection system requirements for reactivity control malfunctions. The protection system shall be designed to assure that SAFDL (Specified Acceptable Fuel Design Limits) are not exceeded for any single malfunction of the reactivity control systems, such as accidental withdrawal (not ejection or dropout) of control rods.' In order to comply GDC 25, CPCS (Core Protection Calculator System) will apply a big power penalty({approx} 1.3) to determine the minimum DNBR (Departure from Nucleate Boiling Ratio), the maximum LPD(Local Power Density) and reactor may immediately trip by CPCS low DNBR and high LPD during high power operation for 12-finger CEA drop. The purpose of this study is to develop the inherent RPCS to avoid unwanted reactor trips due to a 12-finger CEA drop. In order to accomplish this purpose, the CPCS should be modified to send RPCS actuation signal and not to apply power penalty due to 12-finger CEA drop for a shot period. During this period which is determined by assessment of safety, the SAFDL will not be violated without any CPCS trip function. The system and CPCS performance is evaluated to verify that CPCS trip does not occurred during 12-finger CEA drop event.

  15. Development of a Desktop Simulator for APR1400 Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. B. [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    It is essential for utilities to possess a full-scope simulator for operator training and operation test for operators. But it is very expensive and sometimes lack of fidelity if processes of developing the simulator and designing the plant are in parallel. It is due to the situation that simulator development stage sometimes precedes the plant design stage and modifications may occur to the design of the plant in construction stage. In an attempt to build a low cost and efficient simulator, a desktop simulator has been developed. This model is described herein. Using desktop simulators for training operators is an efficient method for familiarizing operators with their plant’s operation. A low cost and efficient desktop simulator for APR1400 has been developed, and brief features are introduced here. It is configured to mimic a full-scale simulator, and can be used for operators to be familiarized to their plant’s operation. Since the size of the simulator is small enough to be fit in a desk, it can be used in a classroom or in an office at any time. It can also be used to evaluate design changes or modifications of the plant before implementing them to the plant.

  16. Preliminary COM3D Analysis for H{sub 2} Combustion in the APR1400 Containment

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hyung Seok; Kim, Jongtae; Kim, Sang-Baik; Hong, Seong-Wan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    In order to assure the containment integrity of APR1400, it is necessary to evaluate an overpressure buildup resulting from a propagation of hydrogen flame along the structure and wall in the containment during a severe accident using the COM3D. Korea Atomic Energy Research Institute (KAERI) established a numerical analysis system for evaluating an overpressure buildup owing to a hydrogen combustion in the containment of a nuclear power plant by importing COM3D from KIT in Germany. The COM3D has been currently used in the simulations of the combustions and explosions, together with the system of industrial risk mitigation of hydrogen and burnable gases in nuclear containment and auxiliary buildings. KAERI performed the hydrogen combustion analysis using the COM3D code with the initial hydrogen distribution calculated by the GASFLOW under assumption of 85% metal-water reaction in the reactor vessel. From the COM3D results, we can know that the pressure buildup was about 100 kPa because the flame speed was not increased above 1000 m/s and the pressure wave passed through the open spaces in the large containment.

  17. Arthrose médiale du genou : évaluations et recommandations cliniques pour les traitements par infiltration, orthèses plantaires et/ou orthèse du genou à l'aide d'analyses quantifiées de la marche

    OpenAIRE

    Dessery, Yoann

    2014-01-01

    L’arthrose du genou (gonarthrose) est une des sources d’incapacité physique les plus fréquentes dans le monde. Plusieurs traitements sont disponibles pour réduire la douleur et ralentir l’évolution de la maladie. Cependant, certains de ces traitements manquent encore de documentation ou d’ajustement par rapport aux patients. L’objectif général de cette thèse est d’évaluer l’impact de différents traitements de la gonarthrose médiale sur la vie quotidienne et le patron de marche afin d’aider le...

  18. L’olivier au Maroc

    Directory of Open Access Journals (Sweden)

    El Mouhtadi Issam

    2014-03-01

    Full Text Available L’olivier est une culture traditionnelle sur le pourtour de la Méditerranée. Il est donc naturel de trouver cet arbre au Maroc où il est présent depuis des siècles. Cultivé surtout traditionnellement jusqu’à ses dernières années, il fait l’objet maintenant d’un plan de valorisation très ambitieux pour non seulement garder le Royaume à son niveau actuel (2e producteur mondial pour l’olive de conserve et 6e pour l’huile d’olive mais pour conquérir de nouveaux marchés au niveau mondial et profiter ainsi de l’engouement que connaît cette huile reconnue pour ses bienfaits. Le plan national « Maroc Vert » permet ainsi, grâce à des subventions conséquentes, non seulement de renouveler les vergers existant avec la variété traditionnelle picholine du Maroc, mais également la plantation de nouvelles variétés en super-intensif dans le but d’industrialiser au maximum de nouveaux vergers. Il en est de même pour la transformation des olives en huile de bonne qualité avec la mise en place d’unités de trituration modernes qui doivent supplanter à terme la multitude de « maâsra » et réduire ainsi l’impact environnemental dû aux margines. L’olive ne sera plus dans l’avenir que représentée par son huile et ses formes comestibles, mais les résidus de son extraction seront valorisés soit sous forme de combustible élaboré pour le grignon, soit sous forme d’une base de chimie verte pour les sous-produits du raffinage. D’autres applications sont actuellement à l’étude, car le Maroc à compris, comme tous les autres grands pays producteurs, que l’olive était un nouveau gisement de richesses.

  19. Traitement des diagraphies acoustiques. Deuxième partie : séparation des ondes en diagraphie acoustique Full-Waveform Acoustic Data Processing. Second Part: Wave Separation in Acoustic Well Logging

    Directory of Open Access Journals (Sweden)

    Gavin P.

    2006-11-01

    Full Text Available L'utilisation d'outils acoustiques à émetteurs-récepteurs multiples et enregistrement numérique permet de faire une microsismique de puits en utilisant des techniques de traitement dérivées du traitement sismique. Comme les enregistrements acoustiques sont composés de différents types d'ondes (ondes de volume réfractées ou réfléchies et ondes d'interface, une étape importante du traitement acoustique est la séparation des ondes. Cet article montre que la séparation des ondes peut être optimisée en fonction du choix du type de collection des enregistrements acoustiques et de la performance des algorithmes utilisés, dépendante du nombre de traces par collection. Les différents types de collection sont la collection émetteur ou récepteur commun et la collection à déport constant. Trois exemples de traitement de diagraphie acoustique sont présentés. Le premier exemple montre que les interférences des ondes qui conduisent à des anomalies sur l'estimation des logs acoustiques tels que le log de lenteur (Delta t sont réduites après une bonne séparation des ondes. Le deuxième exemple est un exemple d'imagerie en puits vertical. Le traitement par filtrage de Wiener sur une section à déport constant permet de différencier les modes réfractés et d'interface des diffractions profondes (environ 4 m créées par la présence d'intercalations dolomitiques en milieu argileux. Le troisième exemple est un exemple d'imagerie en puits horizontal. Le traitement est réalisé sur une collection point de tir commun. La combinaison de filtrage en vitesse apparente pour extraire les différents types d'ondes et de filtrage matriciel pour améliorer le rapport signal sur bruit a permis d'extraire un jeu de réflexions. La connaissance a priori de la zone réservoir a permis d'identifier les événements réfléchis en-dessous et en-dessus du drain. Cet exemple montre la nécessité d'utiliser des techniques spécifiques pour lever l

  20. Travailler avec Windows 7 au CERN (FR)

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). La mise à disposition de Windows 7 au CERN et son intégration dans l’infrastructure de Windows au CERN seront présentées.

  1. Becoming independent through au pair migration

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    . This article argues that, despite this critique, au pairing does play an important formative role for young Filipinas because it opens up for experiences abroad that enable them to be recognised as independent adults in Philippine society. Rather than autonomy, however, au pairs define their independence...

  2. Study of Au+Au relativistic collisions with the Fopi-Phase I detector; Etude des collisions relativistes Au+Au avec le detecteur Fopi-Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Dupieux, P

    1995-01-01

    Au+Au relativistic collisions, in a 100-1000 MeV energy domain per nucleon, are described. Experiments have been carried out with the SIS accelerator at GSI/Darmstadt. Data are analysed with the FOPI-phase I detector. These data are compared with IQMD model (Isospin Quantum Molecular Dynamics) Predictions. (S.G). 80 refs., 77 figs., 5 tabs.

  3. Coinfection pulmonaire par pneumocystis jirovecii et pseudomonas aeruginosa au cours du SIDA: à propos de deux cas

    Science.gov (United States)

    Mamoudou, Savadogo; Bellaud, Guillaume; Ana, Canestri; Gilles, Pialoux

    2015-01-01

    Rapporter deux cas cliniques de coinfections pulmonaires par Pneumocystis jirovecii et par Pseudomonas aeruginosa chez des patients vivant avec le VIH. Les deux patients étaient âgés respectivement de 32 ans et 46 ans. Un patient a été pris en charge à l'hôpital Yalgado Ouédraogo de Ouagadougou au Burkina Faso et l'autre a été pris en charge à l'hôpital Ténon de Paris, en France. Les deux souffraient de pneumopathie confirmée à la radiographie et à la tomodensitométrie. L'un des patients était sévèrement immuno déprimé, contrairement à l'autre. L'examen bactériologique dans les crachats avait permis d'isoler Pseudomonas aeruginosa et Pneumocystis jirovecii chez les deux patients. Sous traitement, l’évolution a été favorable. Les coinfections morbides sont relativement fréquentes chez les patients vivant avec le VIH. Devant une symptomatologie respiratoire du sujet vivant avec le VIH, il faut savoir rechercher en plus du Bacille de Koch, Pneumocystis jirovecii et Pseudomonas aeruginosa par un lavage broncho alvéolaire. PMID:26516396

  4. English for au pairs the au pair's guide to learning English

    CERN Document Server

    Curtis, Lucy

    2014-01-01

    English for Au Pairs has interlinked stories about a group of au pairs new to England. Marta, an 18-year-old from Poland arrives in the UK to work as an au pair. Throughout her year-long stay she has many different experiences - some bad, some good - but with the support of her host family she finds new friends and improves her English. English for Au Pairs offers insight into the joys and difficulties of being an au pair while at the same time reinforcing English language learning through grammar explanations and exercises.

  5. La qualité en industrie, application : travail sur la qualité produit au sein d'une industrie agro-alimentaire

    OpenAIRE

    Ispa, Myriam

    2004-01-01

    L'important développement industriel et les évolutions sociales majeures de ces dernières décennies sont à l'origine de l'avènement de la qualité qui occupe aujourd'hui une place à part entière dans les entreprises. Son importance est universellement reconnue et elle se situe maintenant au coeur des dernières théories managériales. Après avoir défini le concept de qualité et retracé son évolution au cours du temps, cette étude établit, dans un premier temps, une présentation complète du manag...

  6. Remarques sur certains archaïsmes iconographiques dans les peintures murales byzantinisantes de la Pologne au XVe siècle

    Directory of Open Access Journals (Sweden)

    Semoglou Athanassios

    2008-01-01

    Full Text Available (francuski L'étude des certains rarissimes archaïsmes iconographiques dans les peintures murales de style byzantin en Pologne de l'époque du roi Ladislas Jagiello (fin du XIVe - début du XVe siècle a révélé la pénétration d'une tradition riche et originale qui remonte au milieu syro-palestinien des premiers siècles du christianisme. Ce langage pictural conservateur traduit le phénomène du retour à des formules archaïques et s'inscrit dans l'effort, de la part du roi, d'harmoniser les tensions politiques et religieuses des deux communautés du pays (orthodoxe et catholique, grandi après l'union du grand Duché de Lituanie au royaume de Pologne en 1386. .

  7. Modifications de l'hémogramme au cours des maladies virales à expression digestive et/ou respiratoire chez le chien

    OpenAIRE

    Lavernhe, Elise

    2002-01-01

    Après un rappel bibliographique concernant les modifications de l'hémogramme au cours des trachéo-bronchites virales, de la maladie de Carré, de la pavovirose et des autres gastro-entérites virales, nous avons choisi d'étudier les hémogrammes de chiens atteints par ces maladies, présentés à la consultation de l'ENVT au cours de trois années scolaires successives. Les hémogrammes des chiens présentant une trachéo-bronchite virale sont peu modifiés. Les anomalies rencontrées sont de nombreuses ...

  8. Theoretical prediction of the noble gas complexes HeAuF and NeAuF

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Ab initio calculations were carried out to investigate the structures and the stability of the noble gas complexes HeAuF and NeAuF through MP2 and CCSD(T) methods.The HeAuF was predicted to have a linear structure with weak He-Au covalent bonding,the distance of which is closer to the covalent limit in comparison with the corresponding van der Waals limit.The dissociation energy with respect to He + AuF was found to be 24 and 26 kJ·mol-1 at the CCSD(T)/basis set B and B’ levels,respectively.However,similar calculations for NeAuF indicate that NeAuF is not a stable species.

  9. Au, Ag and Au:Ag colloidal nanoparticles synthesized by pulsed laser ablation as SERS substrates

    Directory of Open Access Journals (Sweden)

    M. Vinod

    2014-12-01

    Full Text Available Chemically pure colloidal suspensions of gold and silver nanoparticles were synthesized using pulsed laser ablation. The dependence of laser fluence on the surface plasmon characteristics of the nanoparticles was investigated. Au:Ag colloidal suspensions were prepared by mixing highly monodisperse Au and Ag nanocolloids. The plasmon band of these mixtures was found to be highly sensitive to Au:Ag concentration ratio and wavelength of the laser beam used in the ablation process. The Au:Ag mixture consists of almost spherical shaped nanostructures with a tendency to join with adjacent ones. The surface enhanced Raman scattering activity of the Au, Ag and Au:Ag colloidal suspensions was tested using crystal violet as probe molecules. Enhancement in Raman signal obtained with Au:Ag substrates was found to be promising and strongly depends on its plasmon characteristics.

  10. RESOLUTION DU PROBLEME DE PREDICTION LINEAIRE PAR LA METHODE ULV. APPLICATION AU SIGNAL FID

    Directory of Open Access Journals (Sweden)

    M KHELIF

    2003-06-01

    Full Text Available Dans le cadre de la spectroscopie RMN, notre objectif est de déterminer le spectre d'absorption du signal de précession libre FID par la méthode de prédiction linéaire (PL. Ceci revient à résoudre le problème de prédiction linéaire en exploitant la méthode de corrélation par l'utilisation de la décomposition en valeurs singulières SVD pour l'inversion de la matrice de corrélation. Or, cette technique est la source d'un certain nombre de problèmes lorsque le signal est noyé dans du bruit. Aussi sera-t-elle coûteuse en temps lorsque les dimensions de la matrice de corrélation sont importantes. Afin de résoudre ce problème, nous exploitons les propriétés d'une nouvelle technique dérivée de la SVD, la décomposition ULV pour minimiser le coût du traitement et assurer une inversion correcte de la matrice de corrélation. Dans ce but, nous déterminons le spectre d'absorption par la technique ULV et nous le comparons avec le spectre déterminé par la SVD et  la FFT. Nous comparons par la suite la qualité des spectres obtenus par rapport au spectre d'absorption idéal  déterminé par FFT.

  11. Single port-assisted fully laparoscopic abdominoperineal resection (APR) with immediate V-RAM flap reconstruction of the perineal defect.

    LENUS (Irish Health Repository)

    Ali, Sayid

    2012-09-01

    Abdominoperineal resection (APR) of anorectal cancers after neoadjuvant chemoradiotherapy may incur significant perineal morbidity. While vertical rectus abdominis muscle (V-RAM) flaps can fill the pelvic resection space with health tissue, their use has previously been described predominantly in association with laparotomy. Here, we describe a means of combination laparoscopic APR with V-RAM flap reconstruction that allows structural preservation of the entire abdominal wall throughout the oncological resection and of the deep parietal layers after V-RAM donation. Furthermore, a single port access device used at the end colostomy site allows a second senior surgeon assist with an additional two working instruments for the purpose of improved pelvic tissue retraction, especially useful in obese patients.

  12. The Determination of Sub-Microgram Quantities, of Amino Acids with H{sup 3}- and C{sup 1}4-Labelled 1-Fluoro-2.4 Dinitrobenzene; Determination d'acides amines en quantites inferieures au microgramme a l'aide de 1-fluoro-2,4-dinitrobenzen e marque au {sup 3}H et au {sup 14}C; Podschet submikrogrammnykh kolichestv aminokislot pri pomoshchi 2 : 4 dinitroftor'enzola, mechennogo H{sup 3} i C{sup 14}; Determinacion de cantidades de aminoacidos inferiores al microgramo por medio de 1-fluoro-2,4-dinitrobenceno marcado con {sup 3}H y {sup 14}C

    Energy Technology Data Exchange (ETDEWEB)

    Beale, D; Whitehead, J K [Middlesex Hospital Medical School, London (United Kingdom)

    1962-01-15

    A method of isotope derivation analysis is described for the estimation of amino acids at levels as low as 10{sup -5} {mu}M in protein hydrolysates. 1-fluoro-2.4-dinitrobenzene-H{sup 3} (G) was synthesized from bromobenzene-H{sup 3} (G), and 1-fluoro- 2.4-dinitrobenzene-C{sup 14} (G) was prepared from chlorobenzene-C{sup 14} (G). The method of analysis involves the treatment of the mixture of amino acids with the tritiated reagent (specific activity 12,8{mu}c/{mu}-equivalent) in alkaline solution followed by the addition of known activities (6000 dpm) of C{sup 14}-labelled 2.4-dinitto phenyl derivatives. After solvent extraction the reaction mixture is separated into its constituent dinitro phenyl derivatives by two-way paper chromatography, and the H{sup 3} and C{sup 14} contente of each spot are determined by combustion and gas counting. The H{sup 3} count gives a measure of the amount of DNP derivative of amino acid isolated from the original mixture, and the C{sup 14} count gives a measure pf losses ihcurred during the analysis. The results obtained from the analysis of ({mu}g of hydrolyzed insulin are in good agreement with values obtained by derivative analysis with H{sup 3} and C{sup 14}-labelled acetic anhydride and by ion exchange resin chromatography. [French] Les auteurs decrivent une methode d'analyse par derivation isotopique permettant d'evaluer des quantites d'acides amines aussi faibles que 10{sup -5} {mu}M dans des hydrolysats de proteine. Le 1-fluoro-2,4-dinitrobenzene-{sup 3}H (G) a ete prepare par synthese a partir du bromobenzene-{sup 3}H (U), et le 1-fluoro-2,4-dinitrobenzene-{sup 14}C (G) a partir du chlorobenzene-{sup 14}C (U). Cette methode d'analyse implique le traitement du melange d'acides amines par le reactif tritie (activite specifique: 12,8 p.c par microequivalent) en solution alcaline, suivi.de l'addition de derives du dinitro-2,4-phenyl e marque au {sup 14}C d'activite connue (6000 dpm). Apres extraction par solvant, les derives du

  13. ÉTUDE COMPARATIVE SUR L’ÉVOLUTION DE L’ALCOOLÉMIE AU COURS DU TEMPS

    Directory of Open Access Journals (Sweden)

    Madalina Toma

    2007-12-01

    Full Text Available La consommation excessive d’alcool éthylique est connue depuis longtemps comme très dangereuse pour la santé humaine. De plus, l’alcool au volant représente, après la vitesse excessive, la deuxième cause d’accidents mortels sur la route. Quoique autorisé au volant à faibles doses dans certains pays, l’alcool met toujours en danger la vie du chauffeur et de ses passagers. Le taux d’alcool dans le sang, pour la même quantité d’éthanol consommée, varie en fonction de différents facteurs physiologiques. Il existe à l’heure actuelle de nombreuses modalités d’estimer l’évolution de l’alcoolémie au cours du temps. Nous avons essayé de démontrer que cette évolution présente une forte variabilité, en fonction du sexe, de l’age et de la physiologie individuelle

  14. Réduction des pertes de mangues après la récolte en Asie du Sud ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    29 avr. 2016 ... Près de 70 % de la production mondiale de mangues provient de l'Inde, mais les pertes après récolte en raison d'une manutention, d'un transport et d'une transformation inadéquats peuvent atteindre 35 %. De plus, les prix obtenus par les producteurs sont souvent peu élevés à cause de la saturation du ...

  15. Migration d'une broche dans le canal médullaire cervical après une ...

    African Journals Online (AJOL)

    Migration d'une broche dans le canal médullaire cervical après une ostéosynthèse de l'articulation acromio-claviculaire. Bah Aliou, El Alaoui Adil. Abstract. We report the case of a 49 year-old right-handed chef with left shoulder trauma occurred during a football game. The diagnosis was fracture of the distal quarter of ...

  16. Evaluation Methodology for Void Swelling Susceptibility of APR1400 Reactor Vessel Internals for U.S. NRC Design Certification

    Energy Technology Data Exchange (ETDEWEB)

    Kweon, Hyeong Do; Lee, Do Hwan [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    The APR1400 RVI (Reactor Vessel Internals) operates in harsh conditions, such as long term exposure to neutron irradiation, high temperatures, reactor coolant environment, and other operating loads. Therefore, even though the RVI components are mainly made of austenitic stainless steel which is well known to have good mechanical and corrosion-resistive properties, these operating conditions. The aging is characterized by a chromium depletion along grain boundaries of austenitic stainless steel, a decrease in ductility and fracture toughness of the steel, an increase in yield and ultimate strength of the steel, and a potential volume change due to void formation in the steel. For these reasons, under certain conditions of stress, temperature, and level of irradiation, the void swelling which is one of the challenging degradation mechanisms affecting the integrity of the RVI may appear at specific locations of the RVI, especially due to high neutron fluence and high temperature under localized gamma heating and low velocity of coolant flow. To assess the effects of operating neutron fluences, temperatures and stresses on the material properties changes and the susceptibility to the void swelling, the evaluation methodology of the APR1400 RVI components for U.S. NRC Design Certification was suggested in this paper. The approach to the evaluation is summarized as follows: 1. RVI component list of the APR1400 is collected. 2. Initial screening to determine the evaluation scope is completed using the design values of fluences. 3. Functionality assessments (radiation transport analysis, CFD analysis, structural analysis) are sequentially performed. 4. Susceptibility to the void swelling is identified through ANSYS/USERMAT module. KHNP believes that the proposed methodology which is based on the EPRI works for operating reactors is the best way to evaluate the void swelling for new reactors such as the APR1400.

  17. Dosage of fission products in irradiated fuel treatment effluents (radio-chemical method); Dosage des produits de fission dans les effluents du traitement des combustibles irradies (methode radiochimique)

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, J [Commissariat a l' Energie Atomique, Marcoule (France). Centre d' Etudes Nucleaires

    1966-07-01

    The dosage methods presented here are applicable to relatively long-lived fission products present in the effluents resulting from irradiated fuel treatment processes (Sr - Cs - Ce - Zr - Nb - Ru - I). The methods are based on the same principle: - addition of a carrying-over agent - chemical separation over several purification stages, - determination of the chemical yield by calorimetry - counting of an aliquot liquid portion. (author) [French] Les methodes de dosage presentees concernent les produits de fission a vie relativement longue presents dans les effluents de traitement des combustibles irradies (Sr - Cs - Ce - Zr - Nb - Ru - I). Elles sont toutes basees sur le meme principe: - addition d'entraineur, - separation chimique en plusieurs stades de purification, - determination du rendement chimique par calorimetrie, - comptage d'une aliquote liquide. (auteur)

  18. Diversity of sulfur-cycle prokaryotes in freshwater lake sediments investigated using aprA as the functional marker gene.

    Science.gov (United States)

    Watanabe, Tomohiro; Kojima, Hisaya; Takano, Yoshinori; Fukui, Manabu

    2013-09-01

    The diversity of sulfate-reducing prokaryotes (SRPs) and sulfur-oxidizing prokaryotes (SOPs) in freshwater lake ecosystems was investigated by cloning and sequencing of the aprA gene, which encodes for a key enzyme in dissimilatory sulfate reduction and sulfur oxidation. To understand their diversity better, the spatial distribution of aprA genes was investigated in sediments collected from six geographically distant lakes in Antarctica and Japan, including a hypersaline lake for comparison. The microbial community compositions of freshwater sediments and a hypersaline sediment showed notable differences. The clones affiliated with Desulfobacteraceae and Desulfobulbaceae were frequently detected in all freshwater lake sediments. The SOP community was mainly composed of four major phylogenetic groups. One of them formed a monophyletic cluster with a sulfur-oxidizing betaproteobacterium, Sulfuricella denitrificans, but the others were not assigned to specific genera. In addition, the AprA sequences, which were not clearly affiliated to either SRP or SOP lineages, dominated the libraries from four freshwater lake sediments. The results showed the wide distribution of some sulfur-cycle prokaryotes across geographical distances and supported the idea that metabolic flexibility is an important feature for SRP survival in low-sulfate environments. Copyright © 2013 Elsevier GmbH. All rights reserved.

  19. Developing Optimal Procedure of Emergency Outside Cooling Water Injection for APR1400 Extended SBO Scenario Using MARS Code

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Jong Rok; Oh, Seung Jong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    In this study, we examined optimum operator actions to mitigate extended SBO using MARS code. Particularly, this paper focuses on analyzing outside core cooling water injection scenario, and aimed to develop optimal extended SBO procedure. Supplying outside emergency cooling water is the key feature of flexible strategy in extended SBO situation. An optimum strategy to maintain core cooling is developed for typical extended SBO. MARS APR1400 best estimate model was used to find optimal procedure. Also RCP seal leakage effect was considered importantly. Recent Fukushima accident shows the importance of mitigation capability against extended SBO scenarios. In Korea, all nuclear power plants incorporated various measures against Fukushima-like events. For APR1400 NPP, outside connectors are installed to inject cooling water using fire trucks or portable pumps. Using these connectors, outside cooling water can be provided to reactor, steam generators (SG), containment spray system, and spent fuel pool. In U. S., similar approach is chosen to provide a diverse and flexible means to prevent fuel damage (core and SFP) in external event conditions resulting in extended loss of AC power and loss of ultimate heat sink. Hence, hardware necessary to cope with extended SBO is already available for APR1400. However, considering the complex and stressful condition encountered by operators during extended SBO, it is important to develop guidelines/procedures to best cope with the event.

  20. A Study on the Embedment Effect in the Soil-Structure Interaction Analysis of the APR1400

    International Nuclear Information System (INIS)

    Young-Sun Jang; Kwang-Ho Joo; Chong-Hak Kim

    2002-01-01

    The SSI (Soil-Structure Interaction) analyses are being performed for the APR1400 (Advanced Power Reactor 1400 MWe, Old name - KNGR; Korean Next Generation Reactor) design, because the APR1400 is developed as a Standard Nuclear Power Plant concept enveloping suitable soil conditions. For the SSI analyses, SASSI program which adopts the Flexible Volume Method is used. In the SSI analyses, there can be uncertainties by Bond and De-bond problem between the structure and lateral soil elements. According to ASCE Standard 4, one method to address this concern is to assume no connectivity between structure and lateral soil over the upper half of the embedment of 20 ft (6 m), whichever is less. This study is performed as a part of the parametric analyses for the APR1400 seismic analyses to address the concern of the potential embedment effect on the in-structure response spectra due to connectivity between structure and lateral soil. In this study, 4 model cases are analyzed to check the potential embedment effect - Full connection, 20 ft no connectivity which is defined as a minimum De-bond depth of the soil in ASCE Standard 4 and 26.5 ft no connectivity between structure and lateral soil over the upper half of the embedment. Last one is full no connection for only reference. The in-structure response spectra are compared with the response spectra without considering the embedment effect. (authors)

  1. Outcomes of patients with abdominoperineal resection (APR) and low anterior resection (LAR) who had very low rectal cancer.

    Science.gov (United States)

    Yeom, Seung-Seop; Park, In Ja; Jung, Sung Woo; Oh, Se Heon; Lee, Jong Lyul; Yoon, Yong Sik; Kim, Chan Wook; Lim, Seok-Byung; Kim, Nayoung; Yu, Chang Sik; Kim, Jin Cheon

    2017-10-01

    We compared the oncological outcomes of sphincter-saving resection (SSR) and abdominoperineal resection (APR) in 409 consecutive patients with very low rectal cancer (i.e., tumors within 3 cm from the anal verge); 335 (81.9%) patients underwent APR and 74 (18.1%) underwent SSR. The APR group comprised higher proportions of men (67.5% vs 55.4%, P = .049) and advanced-stage patients (P cancer stages. RFS was associated with ypT and ypN stages in patients who received PCRT, while pN stage, lymphovascular invasion (LVI), and circumferential resection margin (CRM) involvement were risk factors for RFS in those who did not receive PCRT. Notably, SSR was not found to be a risk factor for RFS in either subgroup. Patients who were stratified according to cancer stage and PCRT also showed no differences in RFS according to the mode of surgery. Our results demonstrate that, regardless of PCRT administration, SSR is an effective treatment for very low rectal cancer, while CRM is an important prognostic factor for patients who did not receive PCRT.

  2. Investigation of the Condensation Effect at IRWST Pool Surface on Containment Back Pressure in APR1400 Containment

    International Nuclear Information System (INIS)

    Lee, Eui Jong; Lee, Jin Yong; Lee, Byung Chul

    2006-01-01

    The APR1400 has several new design concepts in order to improve the plant safety functions during a postulated accident. The In-Containment Refueling Water Storage Tank (IRWST) is one of the new design concepts of APR1400 and installed at the bottom of containment building to promote the plant safety functions by simplifying emergency core cooling water source and preventing release of the fission product during an accidents. This design feature, however, brings about uncertainty factors which may necessitate conventional prediction of temperature and pressure of containment building improved or revised under accident conditions. The hot steam which is released from RCS break enters into the IRWST through four Pressure Relief Dampers (PRDs). It is expected to be condensed with water stored in IRWST, colder than incoming steam. The purpose of this study is to examine closely the influence of the condensation effect at IRWST on containment back pressure in APR1400 containment building using the GOTHIC code which can predict the steam condensation on IRWST pool surface

  3. Drop size measurements and entrainment in APR1400 during LBLOCA reflood phase

    International Nuclear Information System (INIS)

    Lee, Eo Hwak

    2010-02-01

    A study has been performed to investigate droplet size in the nuclear reactor of APR1400 during LBLOCA reflood phase and to develop droplet entrainment and deposition models for SPACE (Safety and Performance CodE) which is a safety analysis tool for PWR being developed in Korea. A freezing technique for measuring the size of droplets was developed to obtain the droplet size distribution in horizontal annular flow in a pipe with a 37.1 mm diameter. Droplets are frozen by using an extremely low temperature nitrogen gas with liquid film extraction. They are then photographed with a microscope and a CCD camera and measured by means of an image process. The results are compared with various experimental data. The droplet sizes measured by the freezing technique are comparable with those measured by other methods at a high superficial air velocity (of 50 m/s). However, because of the film extraction problem, the droplet sizes measured at a low superficial air velocity of less than 40 m/s are higher than those measured by other methods. A present method suggested for predicting the Sauter mean diameter is based on the maximum droplet size correlation for the experimental data, with and without liquid film extraction. The average droplet size is remarkably smaller downstream of the liquid film extractor because large droplets from the liquid film are excluded. In order to understand and to predict a heat transfer between superheated steam and droplets properly during reflood phase of LBLOCA, it is very important to measure broken droplet sizes by spacer grids. A study, therefore, has been performed to investigate droplet size in rod bundles with spacer grids and to develop a spacer grid droplet breakup model for safety analysis codes. Experiments were conducted with liquid droplets (SMD of 300∼700 μm) and various spacer grids at superficial air velocity of 10 m/s and 20 m/s based on FLECHT SEASET. The test channel and the grids were heated to 150 .deg. C to prevent

  4. Drop size measurements and entrainment in APR1400 during LBLOCA reflood phase

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eo Hwak

    2010-02-15

    A study has been performed to investigate droplet size in the nuclear reactor of APR1400 during LBLOCA reflood phase and to develop droplet entrainment and deposition models for SPACE (Safety and Performance CodE) which is a safety analysis tool for PWR being developed in Korea. A freezing technique for measuring the size of droplets was developed to obtain the droplet size distribution in horizontal annular flow in a pipe with a 37.1 mm diameter. Droplets are frozen by using an extremely low temperature nitrogen gas with liquid film extraction. They are then photographed with a microscope and a CCD camera and measured by means of an image process. The results are compared with various experimental data. The droplet sizes measured by the freezing technique are comparable with those measured by other methods at a high superficial air velocity (of 50 m/s). However, because of the film extraction problem, the droplet sizes measured at a low superficial air velocity of less than 40 m/s are higher than those measured by other methods. A present method suggested for predicting the Sauter mean diameter is based on the maximum droplet size correlation for the experimental data, with and without liquid film extraction. The average droplet size is remarkably smaller downstream of the liquid film extractor because large droplets from the liquid film are excluded. In order to understand and to predict a heat transfer between superheated steam and droplets properly during reflood phase of LBLOCA, it is very important to measure broken droplet sizes by spacer grids. A study, therefore, has been performed to investigate droplet size in rod bundles with spacer grids and to develop a spacer grid droplet breakup model for safety analysis codes. Experiments were conducted with liquid droplets (SMD of 300∼700 μm) and various spacer grids at superficial air velocity of 10 m/s and 20 m/s based on FLECHT SEASET. The test channel and the grids were heated to 150 .deg. C to prevent

  5. Review on the NEI Methodology of Debris Transport Analysis in Sump Blockage Issue for APR1400

    International Nuclear Information System (INIS)

    Kim, Jong Uk; Lee, Jeong Ik; Hong, Soon Joon; Lee, Byung Chul; Bang, Young Seok

    2007-01-01

    Since USNRC (United State Nuclear Regulatory Committee) initially addressed post-accident sump performance under Unresolved Safety Issue USI A-43, sump blockage issue has gone through GSI-191, Regulation Guide 1.82, Rev. 3 (RG. 1.82 Rev.3), and generic Letter 2004-02 for PWRs (Pressurized Water Reactors). As a response of these USNRC's activities, NEI 04-07 was issued in order to evaluate the post-accident performance of a plant's recirculation sump. The baseline methodology of NEI 04-07 is composed of break selection, debris generation, latent debris, debris transport, and head loss. In analytical refinement of NEI 04-07, computational fluid dynamic (CFD) is suggested for the evaluation of debris transport in emergency core cooling (ECC) recirculation mode as guided by RG. 1.82 Rev.3. In Korea nuclear industry also keeps step with international activities of this safety issue, with Kori 1 plant as a pioneering edge. Korean nuclear industry has been also pursuing development of an advanced PWR of APR1400, which incorporates several improved safety features. One of the key features, considering sump blockage issue, is the adoption of IRWST (In-containment Refueling Water Storage Tank). This device, as the acronym implies, changes the emergency core cooling water injection pattern. This fact makes us to review the applicability of NEI 04-07's methodology. In this paper we discuss the applicability of NEI 04- 07's methodology, and more over, new methodology is proposed. And finally the preliminary debris transport is analyzed

  6. Feasibility Study of Core Design with a Monte Carlo Code for APR1400 Initial core

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jinsun; Chang, Do Ik; Seong, Kibong [KEPCO NF, Daejeon (Korea, Republic of)

    2014-10-15

    The Monte Carlo calculation becomes more popular and useful nowadays due to the rapid progress in computing power and parallel calculation techniques. There have been many attempts to analyze a commercial core by Monte Carlo transport code using the enhanced computer capability, recently. In this paper, Monte Carlo calculation of APR1400 initial core has been performed and the results are compared with the calculation results of conventional deterministic code to find out the feasibility of core design using Monte Carlo code. SERPENT, a 3D continuous-energy Monte Carlo reactor physics burnup calculation code is used for this purpose and the KARMA-ASTRA code system, which is used for a deterministic code of comparison. The preliminary investigation for the feasibility of commercial core design with Monte Carlo code was performed in this study. Simplified core geometry modeling was performed for the reactor core surroundings and reactor coolant model is based on two region model. The reactivity difference at HZP ARO condition between Monte Carlo code and the deterministic code is consistent with each other and the reactivity difference during the depletion could be reduced by adopting the realistic moderator temperature. The reactivity difference calculated at HFP, BOC, ARO equilibrium condition was 180 ±9 pcm, with axial moderator temperature of a deterministic code. The computing time will be a significant burden at this time for the application of Monte Carlo code to the commercial core design even with the application of parallel computing because numerous core simulations are required for actual loading pattern search. One of the remedy will be a combination of Monte Carlo code and the deterministic code to generate the physics data. The comparison of physics parameters with sophisticated moderator temperature modeling and depletion will be performed for a further study.

  7. Onset of liquid droplet entrainment on a direct vessel injection system for APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Han-sol; Lee, Jae-Young [Handong Global University, Pohang (Korea, Republic of); Kim, Jong-Rok; Euh, Dong-Jin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    In this research, a series of visualization works was conducted to understand droplet entrainment of the flow pattern generated in direct vessel injection system(DVI) of Korea nuclear power plant, APR 1400. In the emergency situation of a nuclear power plant, reliability of DVI cooling can be an important issue. It is known that, the amount and the rate of entrainment during the DVI cooling process can significantly affect the total heat removal. To visualize the film Reynolds number closely related with onset of droplet entrainment induced by falling film flow and lateral air flow in a small gap, confocal chromatic sensing method for measuring accurately film thickness and depth averaging particle image velocimetry for film velocity were used. The results have been post processed 4G Insight software. By measuring two dimensional film Reynolds number, we can predict the onset of droplet entrainment and obtain visible breakup region intuitively. To visualize the droplet entrainment induced by falling film flow and lateral air flow in a small gap, shadowgraph method with CCD camera (2200fps, 1280 pixel X 800 pixel, ) on coated plate with super water-repellent agent was used. The results have been post processed using 4G Insight software. By measuring two dimensional film Reynolds number, we can predict the onset of droplet entrainment and obtain visible breakup region intuitively. By adopting both super hydrophobic coating method and shadowgraph method, entrainment in a narrow gap was successfully visualized that has rarely performed before and meaningful results for DVI system research fields have been made.

  8. Onset of liquid droplet entrainment on a direct vessel injection system for APR1400

    International Nuclear Information System (INIS)

    Kim, Han-sol; Lee, Jae-Young; Kim, Jong-Rok; Euh, Dong-Jin

    2016-01-01

    In this research, a series of visualization works was conducted to understand droplet entrainment of the flow pattern generated in direct vessel injection system(DVI) of Korea nuclear power plant, APR 1400. In the emergency situation of a nuclear power plant, reliability of DVI cooling can be an important issue. It is known that, the amount and the rate of entrainment during the DVI cooling process can significantly affect the total heat removal. To visualize the film Reynolds number closely related with onset of droplet entrainment induced by falling film flow and lateral air flow in a small gap, confocal chromatic sensing method for measuring accurately film thickness and depth averaging particle image velocimetry for film velocity were used. The results have been post processed 4G Insight software. By measuring two dimensional film Reynolds number, we can predict the onset of droplet entrainment and obtain visible breakup region intuitively. To visualize the droplet entrainment induced by falling film flow and lateral air flow in a small gap, shadowgraph method with CCD camera (2200fps, 1280 pixel X 800 pixel, ) on coated plate with super water-repellent agent was used. The results have been post processed using 4G Insight software. By measuring two dimensional film Reynolds number, we can predict the onset of droplet entrainment and obtain visible breakup region intuitively. By adopting both super hydrophobic coating method and shadowgraph method, entrainment in a narrow gap was successfully visualized that has rarely performed before and meaningful results for DVI system research fields have been made

  9. Steady state flow evaluations for passive auxiliary feedwater system of APR

    International Nuclear Information System (INIS)

    Park, Jongha; Kim, Jaeyul; Seong, Hoje; Kang, Kyoungho

    2012-01-01

    This paper briefly introduces a methodology to evaluate steady state flow of APR+ Passive Auxiliary Feedwater System (PAFS). The PAFS is being developed as a safety grade passive system to completely replace the existing active Auxiliary Feedwater System (AFWS). Natural circulation cooling can be generally classified into the single-phase, two-phase, and boiling-condensation modes. The PAF is designed to be operated in a boiling-condensation natural circulation mode. The steady-state flow rate should be equal to the steady-state boiling/condensation rate determined by the steady-state energy and momentum balances in the PAFS. The determined steady-state flow rate can be used in the design optimization for the natural circulation loop of the PAFS through the steady-state momentum balance. Since the retarding force, which is to be balanced by the driving force in the natural circulation system design depends on the reliable evaluation of the success of a natural circulation system design depends on the reliable evaluation of the pressure loss coefficients. In PAFS, the core decay heat is released by natural circulation flow between the S G secondary side and the Passive Condensation Heat Exchanger (PCHX) that is immersed in the Passive Condensation Cooling Tank (PCCT). The PCCT is located on the top of Auxiliary building The driving force is determined by the difference between the S/G (heat Source) secondary water level and condensation liquid (heat sink) level. It will overcome retarding force at flowrate in the system, which is determined by vaporization and condensation of the steam which is generated at the S/G by the latent heat in system. In this study, the theoretical method to estimate the steady state flow rate in boiling-condensation natural circulation system is developed and compared with test results

  10. Analysis of a molten pool natural convection in the APR1400 RPV at a severe accident

    International Nuclear Information System (INIS)

    Kim, Jong Tae; Park, Rae Joon; Kim, Sang Baik

    2005-01-01

    During a hypothetical severe accident, reactor fuel rods and structures supporting them are melted and relocated in the lower head of the reactor vessel. These relocated molten materials could be separated by their density difference and construct metal/oxide stratified pools in the lower head. A decay heat generated from the fuel material is transferred to the vessel wall and upper structures remaining in the reactor vessel by natural convection. As shown in Fig. 1 two-layered stratified molten pool is developed in the reactor lower vessel. The oxidic pool usually constructed by the mixture of uranium oxide and zirconium oxide. The melting temperature of the oxidic material is very high compared to the steel vessel and metallic layer. And highly turbulent natural convection generated by the decay heat enhances heat transfer to the boundary of the oxidic pool. By this thermal mechanism, oxide curst is developed around the oxidic layer as shown in Fig. 1. The oxidic pool is bounded thermally and fluid-dynamically by the developed crust. By this boundedness, the heat transfer structure in the stratified oxidic/metallic pool can be solved separately. The thermal boundary condition of the oxidic pool is isothermal with constant melting temperature of the oxidic material. The decay heat is transfer to side wall and upper interface between oxidic and metallic layer. Turbulent natural convection is dominant heat transfer mechanism in the oxidic pool. The heat transferred from the bottom oxidic layer is imposed to the upper metallic layer. This transferred heat in the metallic pool is removed through side and upper surface, which is augmented also by natural convection developed in the pool. In this study, a molten pool natural convection in the APR1400 RPV during a severe accident is simulated using the Lilac code and the calculated heat flux distribution on the reactor vessel wall is compared with a lumped-parameter (LP) prediction

  11. Instruments used to measure or check {alpha}, {beta}, {gamma} activity and neutron emission in the course of processing ore or irradiated fuel; Appareils de mesure ou de controle {alpha}, {beta}, {gamma}, n, des circuits des usines de traitement du minerai ou du combustible irradie

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, A; Brunet, M; Kermagoret, M; Labeyrie, J; Roux, G; Vasseur, J; Weil, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1959-07-01

    One of the methods checking ores in the course of treatment is the rapid quantitative determination of thorium. This measurement is carried out by means of a scintillation instrument which shows the {beta} and {alpha} coincidences of ThC and ThC'. The treatment of irradiated fuel is accompanied by a large number of radioactive checks relative to the performance of the fixation and elution operations of uranium in the ion exchangers, to the concentration of radioactivity of effluent sent from the plant into watercourses. The operations of fixation and elution of the uranium are checked automatically by an instrument which takes a sample of 5 cm{sup 3} of solution, evaporates it and measures its activity every 10 or 20 minutes. Plutonium concentrations are measured: - in the presence of strong {beta} {gamma} activities, by means of rotating cylinder detectors; - in the presence of weak {beta} {gamma} activities, by means of {alpha} detectors scanning a constant level liquid surface; - by means of fission chambers relatively insensitive to {gamma}. Fission product concentrations are measured by chambers, counters or scintillators, according to the amount of {gamma} activity present. Finally, the activity of effluent to be emptied into watercourses is checked by means of a scintillation instrument, which measures the {alpha} activity on the one hand, and on the other hand the {beta} {gamma} activity of residue from a 100 cm{sup 3} sample taken and evaporated in 20 minutes. (author) [French] Parmi les controles relatifs au minerai en cours de traitement, figure le dosage rapide de thorium. Cette mesure est realisee au moyen d'un appareillage a scintillation qui met en evidence la coincidence des emissions {beta} et {alpha} du ThC et du ThC'. Le traitement des combustibles irradies s'accompagne d'un grand nombre de controles radioactifs portant sur le fonctionnement des operations de fixation et d'elution de l'uranium dans les echangeurs d'ions, sur la concentration du

  12. Controlled Synthesis of Au@AgAu Yolk-Shell Cuboctahedra with Well-Defined Facets.

    Science.gov (United States)

    Londono-Calderon, Alejandra; Bahena, Daniel; Yacaman, Miguel J

    2016-08-02

    The synthesis of Au@AgAu yolk-shell cuboctahedra nanoparticles formed by galvanic replacement in a seed-mediated method is described. Initially, single-crystal Au seeds are used for the formation of Au@Ag core-shell nanocubes, which serve as the template material for the deposition of an external Au layer. The well-controlled synthesis yields the formation of cuboctahedra nanoparticles with smooth inner and outer Au/Ag surfaces. The deposition/oxidation process is described to understand the formation of cuboctahedra and octahedra nanoparticles. The Au core maintains the initial morphology of the seed and remains static at the center of the yolk-shell because of residual Ag. Structural analysis of the shell indicates intrinsic stacking faults (SFs) near the surface. Energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) compositional analysis show an Au-Ag nonordered alloy forming the shell. The three-dimensional structure of the nanoparticles presented open facets on the [111] as observed by electron tomography SIRT reconstruction over a stack of high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images. The geometrical model was validated by analyzing the direction of streaks in coherent nanobeam diffraction (NBD). The catalytic activity was evaluated using a model reaction based on the reduction of 4-nitrophenol (4-NTP) by NaBH4 in the presence of Au@AgAu yolk-shell nanoparticles.

  13. Solvent purification using a current of water vapour. A continuous process applicable to chemical plants treating irradiated fuels; Purification des solvants par entrainement a la vapeur d'eau. Procede continu applicable aux usines chimiques de traitement des combustibles irradies

    Energy Technology Data Exchange (ETDEWEB)

    Auchapt, P.R.; Sautray, R.R.; Girard, B.R. [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1964-07-01

    sur la decontamination. L'activite en zirconium-niobium apres traitement est indecelable et il est facile d'obtenir des facteurs de decontamination de 300 sur le ruthenium. La presence d'uranium favorise la decontamination. Pour terminer, le lecteur trouvera des considerations extra-techniques et en particulier l'ordre de grandeur des prix de revient du litre de solvant traite. (auteurs)

  14. The development of a cell-assembly for the treatment of irradiated fuels on a semi-industrial scale; Etude concernant la realisation d'un ensemble de cellules destinees a des traitements de combustibles irradies a l'echelle semi-industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Faugeras, P; Couture, J; Lefort, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-07-01

    The main studies and experiments involved in the development of a cell-assembly for the treatment of irradiated fuels on a semi-industrial scale are described. It must be possible to modify or transform each of these cells without interrupting the rest of the pilot. A full-scale prototype cell (3 x 4 x 6 m) has been built with an {alpha}-protection independent of the {gamma}-protection. It features all the main characteristics: tightness to {gamma} losses, dense glass lighting, ventilation. This cell has made possible trials on transfer, remote-controls and tele-dismantling, as well as the development of new methods of rapidly connecting hydraulic circuits. In conclusion the final form is given of the cells selected for the pilot. (author) [French] Il est decrit les principales etudes et experiences faites en vue de la realisation d'un ensemble de cellules destinees a des traitements de combustibles irradies a l'echelle semi-industrielle. Chacune de ces cellules doit pouvoir etre modifiee ou transformee sans interrompre le reste du pilote. Une cellule prototype vraie grandeur (3x4x6 m) est construite avec une protection {alpha} independante de la protection {gamma}. Elle comporte tous les elements importants: porte {gamma} etanche, eclairage verre dense, ventilation. Cette cellule a permis des experiences de transferts de telemanipulateurs et de teledemontages, ainsi que la mise au point de nouveaux procedes de jonction rapide pour des circuits hydrauliques. En conclusion, on indique la forme definitive des cellules retenues pour le pilote. (auteur)

  15. Cold-Leg Small Break LOCA Analysis of APR1400 Plant Using a SPACE/sEM Code

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Sang Gyu; Lee, Suk Ho; Yu, Keuk Jong; Kim, Han Gon; Lee, Jae Yong [Central Research Institute, KHNP, Ltd., Daejeon (Korea, Republic of)

    2013-10-15

    The Small Break Loss-of-Coolant Accident (SBLOCA) evaluation methodology (EM) for APR1400, called sEM, is now being developed using SPACE code. SPACE/sEM is to set up a conservative evaluation methodology in accordance with appendix K of 10 CFR 50. Major required and acceptable features of the evaluation models are described as below. - Fission product decay : 1.2 times of ANS97 decay curve - Critical flow model : Henry-Fauske Moody two phase critical flow model - Metal-Water reaction model : Baker-Just equation - Critical Heat Flux (CHF) : B and W, Barnett and Modified Barnett correlation - Post-CHF : Groeneveld 5.7 film boiling correlation A series of test matrix is established to validate SPACE/sEM code in terms of major SBLOCA phenomena, e.g. core level swelling and boiling, core heat transfer, critical flow, loop seal clearance and their integrated effects. The separated effect tests (SETs) and integrated effect tests (IETs) are successfully performed and these results shows that SPACE/sEM code has a conservatism comparing with experimental data. Finally, plant calculations of SBLOCA for APR1400 are conducted as described below. - Break location sensitivity : DVI line, hot-leg, cold-leg, pump suction leg. - Break size spectrum : 0.4ft{sup 2}∼0.02ft{sup 2}(DVI) 0.5ft{sup 2}∼0.02ft{sup 2}(hot-leg, cold-leg, pump suction leg) This paper deals with break size spectrum analysis of cold-leg break accidents. Based on the calculation results, emergency core cooling system (ECCS) performances of APR1400 and typical SBLOCA phenomena can be evaluated. Cold-leg SBLOCA analysis for APR1400 is performed using SPACE/sEM code under harsh environment condition. SPACE/sEM code shows the typical SBLOCA behaviors and it is reasonably predicted. Although SPACE/sEM code has conservative models and correlations based on appendix K of 10 CFR 50, PCT does not exceed the requirement (1477 K). It is concluded that ECCS in APR1400 has a sufficient performance in cold-leg SBLOCA.

  16. Cold-Leg Small Break LOCA Analysis of APR1400 Plant Using a SPACE/sEM Code

    International Nuclear Information System (INIS)

    Lim, Sang Gyu; Lee, Suk Ho; Yu, Keuk Jong; Kim, Han Gon; Lee, Jae Yong

    2013-01-01

    The Small Break Loss-of-Coolant Accident (SBLOCA) evaluation methodology (EM) for APR1400, called sEM, is now being developed using SPACE code. SPACE/sEM is to set up a conservative evaluation methodology in accordance with appendix K of 10 CFR 50. Major required and acceptable features of the evaluation models are described as below. - Fission product decay : 1.2 times of ANS97 decay curve - Critical flow model : Henry-Fauske Moody two phase critical flow model - Metal-Water reaction model : Baker-Just equation - Critical Heat Flux (CHF) : B and W, Barnett and Modified Barnett correlation - Post-CHF : Groeneveld 5.7 film boiling correlation A series of test matrix is established to validate SPACE/sEM code in terms of major SBLOCA phenomena, e.g. core level swelling and boiling, core heat transfer, critical flow, loop seal clearance and their integrated effects. The separated effect tests (SETs) and integrated effect tests (IETs) are successfully performed and these results shows that SPACE/sEM code has a conservatism comparing with experimental data. Finally, plant calculations of SBLOCA for APR1400 are conducted as described below. - Break location sensitivity : DVI line, hot-leg, cold-leg, pump suction leg. - Break size spectrum : 0.4ft 2 ∼0.02ft 2 (DVI) 0.5ft 2 ∼0.02ft 2 (hot-leg, cold-leg, pump suction leg) This paper deals with break size spectrum analysis of cold-leg break accidents. Based on the calculation results, emergency core cooling system (ECCS) performances of APR1400 and typical SBLOCA phenomena can be evaluated. Cold-leg SBLOCA analysis for APR1400 is performed using SPACE/sEM code under harsh environment condition. SPACE/sEM code shows the typical SBLOCA behaviors and it is reasonably predicted. Although SPACE/sEM code has conservative models and correlations based on appendix K of 10 CFR 50, PCT does not exceed the requirement (1477 K). It is concluded that ECCS in APR1400 has a sufficient performance in cold-leg SBLOCA

  17. AU-EU “Strategic Partnership”

    DEFF Research Database (Denmark)

    Rodt, Annemarie Peen; Okeke, Jide

    2013-01-01

    This article appraises strategic partnership between the African Union (AU) and European Union (EU). It examines the context and nature of AU and EU security relations and explores the conditions under which partnership has a positive impact in this regard. This includes an evaluation...... of convergence between the two organizations and its effect or lack thereof on African security. The article concludes that events leading up to and initiatives following the 2007 Joint Africa–European Union Strategy have produced a degree of AU and EU convergence, which has had limited impact on the efficacy...... of the African security regime, the level of which remains mediocre at best....

  18. Synthesis of ultrathin face-centered-cubic Au@Pt and Au@Pd core-shell nanoplates from hexagonal-close-packed Au square sheets

    KAUST Repository

    Fan, Zhanxi

    2015-03-17

    The synthesis of ultrathin face-centered-cubic (fcc) Au@Pt rhombic nanoplates is reported through the epitaxial growth of Pt on hexagonal-close-packed (hcp) Au square sheets (AuSSs). The Pt-layer growth results in a hcp-to-fcc phase transformation of the AuSSs under ambient conditions. Interestingly, the obtained fcc Au@Pt rhombic nanoplates demonstrate a unique (101)f orientation with the same atomic arrangement extending from the Au core to the Pt shell. Importantly, this method can be extended to the epitaxial growth of Pd on hcp AuSSs, resulting in the unprecedented formation of fcc Au@Pd rhombic nanoplates with (101)f orientation. Additionally, a small amount of fcc (100)f-oriented Au@Pt and Au@Pd square nanoplates are obtained with the Au@Pt and Au@Pd rhombic nanoplates, respectively. We believe that these findings will shed new light on the synthesis of novel noble bimetallic nanostructures. Phase change: Ultrathin Au@Pt and Au@Pd core-shell nanoplates were prepared from Au square sheets. A phase transformation from hexagonal close-packed (hcp) to face-centered cubic (fcc) is observed upon coating the hcp Au square sheets with Pt or Pd under ambient conditions. The prepared fcc Au@Pt and Au@Pd rhombic nanoplates demonstrate unique (101)f orientation (picture shows a typical fcc Au@Pt rhombic nanoplate). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Les conjonctivites néonatales dans le canton de Glidji au Sud du Togo: une étude transversale à propos de 159 nouveau-nés

    Science.gov (United States)

    Kokou, Vonor; Nidain, Maneh; Kassoula, Nononsaa Batomguela; Kwassi, Fiaty- Amenouvor; Meba, Banla; Patrice, Balo Komi

    2016-01-01

    Introduction Le but de l’étude était décrire les aspects épidémiologiques des conjonctivites néonatales dans le canton de Glidji au Sud du Togo. Methodes Nous avons mené une étude transversale dans les 4 Unités Sanitaires Périphériques du canton de Glidji du 19 Mars au 13 Mai 2009 soit 8 semaines. Tous les nouveau-nés ont été inclus et la conjonctivite néonatale était définie par la présence chez un nouveau-né d'au moins deux des signes suivants: hyperhémie conjonctivale, œdème palpébral, chémosis, sécrétions purulentes, larmoiement. Les paramètres étudiés étaient l’âge, le sexe, les facteurs de risque, les antécédents, la présence ou non de conjonctivite, les germes en causes et l’évolution sous traitement. Resultats Sur la période, 159 nouveau-nés ont été examinés. L’âge moyen était de 10,9 jours avec des extrêmes de 0 à 28 jours. Il y avait 80 garçons pour 79 filles soit un sex-ratio de 1,01. Sur les 159 nouveau-nés, 7 cas de conjonctivite ont été diagnostiqués soit une prévalence de 4,4%. Les facteurs de risque identifiés étaient l'accouchement par voie basse et la présence d'IST chez la mère pendant la grossesse. Sur les 7 cas de conjonctivite, l'examen cytobactériologique a permis d'isoler le staphylococcus aureus dans 2 cas. L’évolution des cas de conjonctivite sous traitement était favorable avec régression des signes dès le 3è jour. Conclusion Les conjonctivites néonatales avaient une prévalence de 4,4% dans le canton de Glidji au sud du Togo et le staphylocoque doré était le germe en cause. Leur prévention passe par un bon suivi lors de la consultation prénatale et l'instillation de collyre antibiotique à la naissance PMID:27642383

  20. Et pourquoi pas au CERN ?

    CERN Multimedia

    Staff Association

    2015-01-01

    Télétravail ou travail à distance, aménagement des horaires de travail et autres évolutions favorables à un meilleur équilibre vie privée et vie professionnelle sont adoptés par nombre d’entreprises et d’organisations !   Rendu possible grâce au développement de nouvelles technologies dont Internet, le travail à distance séduit de plus en plus de personnels, ainsi que de plus en plus de sociétés qui y trouvent des avantages en matière de gestion de l’espace, de sécurité (moins de trajets domicile-entreprise), de développement durable (moins de pollution), de motivation et de bien-être de leurs personnels. Les horaires aménagés, voire les « core-hours1 », sont également des pratiques de plus e...

  1. Femmes cinéastes en France : l'après-mai 68

    OpenAIRE

    ROLLET, Brigitte

    2006-01-01

    Agnès Varda, Coline Serreau, Nelly Kaplan, trois noms parmi des dizaines qui illustrent chacun à leur manière une nouvelle façon de faire du cinéma : même si la carrière de la première est antérieure à mai 68, son nom comme celui des autres est lié à ce qu’on appellera dans les années 1970 le « cinéma des femmes ». Cet article propose une interrogation sur ce cinéma au féminin, afin d’envisager à la fois le contexte particulier dans lequel il émerge, les problématiques qu’il soulève, et ce en...

  2. Guide d'exploitation des filières de traitement par boues activées

    OpenAIRE

    Boutin, C.; Caquel, O.; Dimastromatteo, N.,; Dumaine, J.,; Fernandes. G.,; Gervasi, C.; Parotin, S.; Prost Boucle, S.; Tscherter, C.

    2015-01-01

    / Ce guide, à destination des maîtres d'ouvrage et des exploitants, a pour objet de présenter de façon synthétique, les modalités d'exploitation courante d'une station d'épuration par boues activées de capacité < 600 kg DBO5/jour (soit 10 000 équivalents habitants (EH)), et dimensionnée dans le domaine de charge de l'aération prolongée (Cm < 0,1 kg DBO5 /kg MVS/jour). Conçu au fil de l'eau, il recense, tant pour la file eau que pour la file boues, l'ensemble des tâches d'exploitation courante...

  3. Local structure of disordered Au-Cu and Au-Ag alloys

    International Nuclear Information System (INIS)

    Frenkel, A. I.; Machavariani, V. Sh.; Rubshtein, A.; Rosenberg, Yu.; Voronel, A.; Stern, E. A.

    2000-01-01

    X-ray-absorption fine structure (XAFS) and x-ray-diffraction (XRD) measurements of disordered alloys Au x Cu 1-x and Au 0.5 Ag 0.5 prepared by melt spinning were performed. In the Au 0.5 Ag 0.5 alloy, no significant local deviations of the atoms from the average fcc lattice were detected while in Au x Cu 1-x alloys, significant deviations of atoms from the average fcc lattice were found. Mean-square vibrations of the Cu-Cu distances revealed by the XAFS in Au x Cu 1-x alloys indicate the weakening of contact between Cu atoms in the dilute limit. Our computer simulation for Au x Cu 1-x clusters of 10 5 atoms reproduces the main features of both the XAFS and XRD data

  4. Charged hadron transverse momentum distributions in Au+Au collisions at S=200 GeV

    Science.gov (United States)

    Roland, Christof; PHOBOS Collaboration; Back, B. B.; Baker, M. D.; Barton, D. S.; Betts, R. R.; Ballintijn, M.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Michałowski, J.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Skulski, W.; Steadman, S. G.; Steinberg, P.; Stephans, G. S. F.; Stodulski, M.; Sukhanov, A.; Tang, J.-L.; Teng, R.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Verdier, R.; Wadsworth, B.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wuosmaa, A. H.; Wysłouch, B.

    2003-03-01

    We present transverse momentum distributions of charged hadrons produced in Au+Au collisions at sqrt(s_NN) = 200 GeV. The evolution of the spectra for transverse momenta p_T from 0.25 to 5GeV/c is studied as a function of collision centrality over a range from 65 to 344 participating nucleons. We find a significant change of the spectral shape between proton-antiproton and peripheral Au+Au collisions. Comparing peripheral to central Au+Au collisions, we find that the yields at the highest p_T exhibit approximate scaling with the number of participating nucleons, rather than scaling with the number of binary collisions.

  5. Comparative efficiencies of photothermal destruction of malignant cells using antibody-coated silica-Au nanoshells, hollow Au/Ag nanospheres and Au nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Fong-Yu; Chen, Chen-Tai; Yeh, Chen-Sheng, E-mail: csyeh@mail.ncku.edu.t [Department of Chemistry, National Cheng Kung University, Tainan 701, Taiwan (China)

    2009-10-21

    Three Au-based nanomaterials (silica-Au nanoshells, hollow Au/Ag nanospheres and Au nanorods) were evaluated for their comparative photothermal efficiencies at killing three types of malignant cells (A549 lung cancer cells, HeLa cervix cancer cells and TCC bladder cancer cells) using a CW NIR laser. Photodestructive efficiency was evaluated as a function of the number of nanoparticles required to destroy the cancer cells under 808 nm laser wavelength at fixed laser power. Of the three nanomaterials, silica/Au nanoshells needed the minimum number of particles to produce effective photodestruction, whereas Au nanorods needed the largest number of particles. Together with the calculated photothermal conversion efficiency, the photothermal efficiency rankings are silica-Au nanoshells > hollow Au/Ag nanospheres > Au nanorods. Additionally, we found that HeLa cells seem to present better heat tolerance than the other two cancer cell lines.

  6. Intense fluorescence of Au 20

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Chongqi; Harbich, Wolfgang; Sementa, Luca; Ghiringhelli, Luca; Apra, Edoardo; Stener, Mauro; Fortunelli, Alessandro; Brune, Harald

    2017-08-21

    Ligand-protected Au clusters are non-bleaching fluorescence markers in bio- and medical applications. We show that their fluorescence is an intrinsic property of the Au cluster itself. We find a very intense and sharp fluorescence peak located at λ =739.2 nm (1.68 eV) for Au20 clusters in a Ne matrix held at 6 K. The fluorescence reflects the HOMO-LUMO diabatic bandgap of the cluster. The cluster shows a very rich absorption fine structure reminiscent of well defined molecule-like quantum levels. These levels are resolved since Au20 has only one stable isomer (tetrahedral), therefore our sample is mono-disperse in cluster size and conformation. Density-functional theory (DFT) and time-dependent DFT calculations clarify the nature of optical absorptionand predict both main absorption peaks and intrinsic fluorescence in good agreement with experiment.

  7. Interplanetary shock phenomena beyond 1 AU

    International Nuclear Information System (INIS)

    Smith, E.J.

    1985-01-01

    Attention is given to spatial dependences exhibited by spacecraft measurements obtained between 1 and 30 AU, together with temporal variations occurring between solar activity cycle maxima and minima. At 1-3 AU radial distances, shocks develop in association with the corotating solar wind streams characterizing solar minimum and accelerate solar wind evolution with distance while heating the solar wind and generating waves and turbulence. At solar maximum, shocks are observed more frequently at 1 AU but still in association with transient solar events; acceleration leading to energetic storm particles is observed both within and beyond 1 AU. The superimposed effect of large numbers of intense shocks may be responsible for the solar cycle modulation of galactic cosmic rays. 77 references

  8. Amélioration de la nutrition au Cambodge au moyen de l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Amélioration de la nutrition au Cambodge au moyen de l'aquaculture et des jardins potagers domestiques (FCRSAI). Si l'on produit au Cambodge suffisamment de riz pour nourrir la population, la sous-alimentation maternelle et infantile y demeure quand même élevée en raison de la faible diversification des cultures et du ...

  9. Proton channeling in Au at low energies

    International Nuclear Information System (INIS)

    Valdes, J.E.; Vargas, P.

    1996-01-01

    The electronic energy loss for low velocity protons channeled in the direction single crystal Au is calculated. The spatial distribution of valence electronic density in Au is calculated using Tight Binding Linear Muffin Tin Method. The proton trajectories are determined by numerical integration of the classical motion equation, and the energy loss is evaluated using the calculated valence electronic density in the friction term. The results allow to describe qualitatively the non linear behavior of energy loss with ion velocity observed experimentally. (author)

  10. Predictors of exclusive breastfeeding: observations from the Alberta pregnancy outcomes and nutrition (APrON) study

    Science.gov (United States)

    2013-01-01

    Background Despite growing evidence that supports the importance of 6-month exclusive breastfeeding, few Canadian mothers adhere to this, and early weaning onto solids is a common practice. This study assessed infant feeding transitions during the first 6 months postpartum and factors that predicted exclusive breastfeeding to 3 and 6 months. Methods This prospective cohort study was part of the Alberta Pregnancy Outcomes and Nutrition study (APrON). From an initial sample of 600 pregnant women recruited from Edmonton and Calgary, 402 mothers provided complete details at 3 months postpartum; 300 stayed on to provide information at 6 months postpartum. During pregnancy and at 3 and 6 months postpartum, data on maternal and infant socio-demographic, behavior, and feeding were collected. Results Even though there was a high rate of “ever having breastfed” (98.6%), exclusive breastfeeding rates for 3 and 6 months were 54.0% and 15.3%, respectively. After controlling for potential confounders, the study showed that mothers who held post-graduate university degrees were 3.76 times more likely to breastfeed exclusively for 6 months than those without a university degree (95% CI: 1.30-10.92; p = 0.015). In addition, mother of previous children were more likely to breastfeed exclusively for 6 months (OR: 2.21, 95% CI: 1.08-4.52; p = 0.031). Mothers who were in the highest quartile of the Iowa Infant Feeding Attitude Score were 4.29 and 5.40 times more likely to breastfeed exclusively for 3 months (95% CI: 1.31-14.08; p-trend breastfeeding rate in Alberta is considerably below national and international breastfeeding recommendations. Professional advice that focuses on prenatal maternal knowledge, attitudes, and misperceptions may promote adherence to World Health Organization breastfeeding guidelines. Knowing that exclusive breastfeeding is less likely to take place among lower-educated, primiparous women may help health practitioners focus their

  11. Development of an amphibious robot for visual inspection of APR1400 Npp IRWST strainer

    International Nuclear Information System (INIS)

    Jang, You Hyun; Kim, Jong Seog

    2014-01-01

    An amphibious inspection robot system (hereafter AIROS) is being developed to visually inspect the in-containment refueling storage water tank (hereafter IRWST) strainer in APR1400 instead of a human diver. Four IRWST strainers are located in the IRWST, which is filled with boric acid water. Each strainer has 108 sub-assembly strainer fin modules that should be inspected with the VT-3 method according to Reg. guide 1.82 and the operation manual. AIROS has 6 thrusters for submarine voyage and 4 legs for walking on the top of the strainer. An inverse kinematic algorithm was implemented in the robot controller for exact walking on the top of the IRWST strainer. The IRWST strainer has several top cross braces that are extruded on the top of the strainer, which can be obstacles of walking on the strainer, to maintain the frame of the strainer. Therefore, a robot leg should arrive at the position beside the top cross brace. For this reason, we used an image processing technique to find the top cross brace in the sole camera image. The sole camera image is processed to find the existence of the top cross brace using the cross edge detection algorithm in real time. A 5-DOF robot arm that has multiple camera modules for simultaneous inspection of both sides can penetrate narrow gaps. For intuitive presentation of inspection results and for management of inspection data, inspection images are stored in the control PC with camera angles and positions to synthesize and merge the images. The synthesized images are then mapped in a 3D CAD model of the IRWST strainer with the location information. An IRWST strainer mock-up was fabricated to teach the robot arm scanning and gaiting. It is important to arrive at the designated position for inserting the robot arm into all of the gaps. Exact position control without anchor under the water is not easy. Therefore, we designed the multi leg robot for the role of anchoring and positioning. Quadruped robot design of installing sole

  12. Development of an amphibious robot for visual inspection of APR1400 Npp IRWST strainer

    Energy Technology Data Exchange (ETDEWEB)

    Jang, You Hyun; Kim, Jong Seog [Korea Hydro Nuclear Power Central Research Institute, Daejeon (Korea, Republic of)

    2014-06-15

    An amphibious inspection robot system (hereafter AIROS) is being developed to visually inspect the in-containment refueling storage water tank (hereafter IRWST) strainer in APR1400 instead of a human diver. Four IRWST strainers are located in the IRWST, which is filled with boric acid water. Each strainer has 108 sub-assembly strainer fin modules that should be inspected with the VT-3 method according to Reg. guide 1.82 and the operation manual. AIROS has 6 thrusters for submarine voyage and 4 legs for walking on the top of the strainer. An inverse kinematic algorithm was implemented in the robot controller for exact walking on the top of the IRWST strainer. The IRWST strainer has several top cross braces that are extruded on the top of the strainer, which can be obstacles of walking on the strainer, to maintain the frame of the strainer. Therefore, a robot leg should arrive at the position beside the top cross brace. For this reason, we used an image processing technique to find the top cross brace in the sole camera image. The sole camera image is processed to find the existence of the top cross brace using the cross edge detection algorithm in real time. A 5-DOF robot arm that has multiple camera modules for simultaneous inspection of both sides can penetrate narrow gaps. For intuitive presentation of inspection results and for management of inspection data, inspection images are stored in the control PC with camera angles and positions to synthesize and merge the images. The synthesized images are then mapped in a 3D CAD model of the IRWST strainer with the location information. An IRWST strainer mock-up was fabricated to teach the robot arm scanning and gaiting. It is important to arrive at the designated position for inserting the robot arm into all of the gaps. Exact position control without anchor under the water is not easy. Therefore, we designed the multi leg robot for the role of anchoring and positioning. Quadruped robot design of installing sole

  13. Predictors of exclusive breastfeeding: observations from the Alberta pregnancy outcomes and nutrition (APrON) study.

    Science.gov (United States)

    Jessri, Mahsa; Farmer, Anna P; Maximova, Katerina; Willows, Noreen D; Bell, Rhonda C

    2013-05-16

    Despite growing evidence that supports the importance of 6-month exclusive breastfeeding, few Canadian mothers adhere to this, and early weaning onto solids is a common practice. This study assessed infant feeding transitions during the first 6 months postpartum and factors that predicted exclusive breastfeeding to 3 and 6 months. This prospective cohort study was part of the Alberta Pregnancy Outcomes and Nutrition study (APrON). From an initial sample of 600 pregnant women recruited from Edmonton and Calgary, 402 mothers provided complete details at 3 months postpartum; 300 stayed on to provide information at 6 months postpartum. During pregnancy and at 3 and 6 months postpartum, data on maternal and infant socio-demographic, behavior, and feeding were collected. Even though there was a high rate of "ever having breastfed" (98.6%), exclusive breastfeeding rates for 3 and 6 months were 54.0% and 15.3%, respectively. After controlling for potential confounders, the study showed that mothers who held post-graduate university degrees were 3.76 times more likely to breastfeed exclusively for 6 months than those without a university degree (95% CI: 1.30-10.92; p = 0.015). In addition, mother of previous children were more likely to breastfeed exclusively for 6 months (OR: 2.21, 95% CI: 1.08-4.52; p = 0.031). Mothers who were in the highest quartile of the Iowa Infant Feeding Attitude Score were 4.29 and 5.40 times more likely to breastfeed exclusively for 3 months (95% CI: 1.31-14.08; p-trend < 0.001) and 6 months (95% CI: 2.75-10.60; P-trend < 0.001), respectively. The 6-month exclusive breastfeeding rate in Alberta is considerably below national and international breastfeeding recommendations. Professional advice that focuses on prenatal maternal knowledge, attitudes, and misperceptions may promote adherence to World Health Organization breastfeeding guidelines. Knowing that exclusive breastfeeding is less likely to take place among lower

  14. DEVELOPMENT OF AN AMPHIBIOUS ROBOT FOR VISUAL INSPECTION OF APR1400 NPP IRWST STRAINER ASSEMBLY

    Directory of Open Access Journals (Sweden)

    YOU HYUN JANG

    2014-06-01

    Full Text Available An amphibious inspection robot system (hereafter AIROS is being developed to visually inspect the in-containment refueling storage water tank (hereafter IRWST strainer in APR1400 instead of a human diver. Four IRWST strainers are located in the IRWST, which is filled with boric acid water. Each strainer has 108 sub-assembly strainer fin modules that should be inspected with the VT-3 method according to Reg. guide 1.82 and the operation manual. AIROS has 6 thrusters for submarine voyage and 4 legs for walking on the top of the strainer. An inverse kinematic algorithm was implemented in the robot controller for exact walking on the top of the IRWST strainer. The IRWST strainer has several top cross braces that are extruded on the top of the strainer, which can be obstacles of walking on the strainer, to maintain the frame of the strainer. Therefore, a robot leg should arrive at the position beside the top cross brace. For this reason, we used an image processing technique to find the top cross brace in the sole camera image. The sole camera image is processed to find the existence of the top cross brace using the cross edge detection algorithm in real time. A 5-DOF robot arm that has multiple camera modules for simultaneous inspection of both sides can penetrate narrow gaps. For intuitive presentation of inspection results and for management of inspection data, inspection images are stored in the control PC with camera angles and positions to synthesize and merge the images. The synthesized images are then mapped in a 3D CAD model of the IRWST strainer with the location information. An IRWST strainer mock-up was fabricated to teach the robot arm scanning and gaiting. It is important to arrive at the designated position for inserting the robot arm into all of the gaps. Exact position control without anchor under the water is not easy. Therefore, we designed the multi leg robot for the role of anchoring and positioning. Quadruped robot design of

  15. Unravelling Thiol’s Role in Directing Asymmetric Growth of Au Nanorod–Au Nanoparticle Dimers

    KAUST Repository

    Huang, Jianfeng

    2015-12-15

    Asymmetric nanocrystals have practical significance in nanotechnologies but present fundamental synthetic challenges. Thiol ligands have proven effective in breaking the symmetric growth of metallic nanocrystals but their exact roles in the synthesis remain elusive. Here, we synthesized an unprecedented Au nanorod-Au nanoparticle (AuNR-AuNP) dimer structure with the assistance of a thiol ligand. On the basis of our experimental observations, we unraveled for the first time that the thiol could cause an inhomogeneous distribution of surface strains on the seed crystals as well as a modulated reduction rate of metal precursors, which jointly induced the asymmetric growth of monometallic dimers. © 2015 American Chemical Society.

  16. Apprentissages techniques : L'apprentissage au CERN

    CERN Multimedia

    2004-01-01

    APPRENTISSAGES TECHNIQUES GESTION ET DEVELOPPEMENT DU PERSONNEL HR/PMD L'APPRENTISSAGE AU CERN pour les professions d'électronicien(ne) et de laborantin(e) en physique L'apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le Canton de Genève. En cas de réussite à l'examen de fin d'apprentissage, les apprentis obtiennent le Certificat Fédéral de Capacité Suisse (CFC). 7 places au total sont ouvertes au recrutement pour les deux professions. L'apprentissage dure 4 ans. Minima requis pour faire acte de candidature : • avoir au moins 15 ans et moins de 21 ans à la date de début de l'apprentissage • avoir terminé la scolarité obligatoire, au minimum 9ème du Cycle d'orientation genevois (3ème en France) • être ressortissant d'un pays membre du CERN (Allemagne, Autriche, Belgiqu...

  17. Influence of heat treatment in {beta} and {gamma} phases on the microscopic structure of uranium; Influence des traitements thermiques en phases {beta} et {gamma} sur la structure micrographique de l'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Robillard, A

    1958-06-02

    A new method of microscopic examination of uranium is described. Electrolytic polishing and etching are carried out in an acetic acid-chromic acid bath. Atmospheric or anodic oxidation of the polished surface produces films which follow exactly changes in the structure of the underlying metal. This method is very sensitive to small variations of orientation in polygonized crystals. Using this method of examination of uranium, it was found that annealing U in the {gamma} phase followed by a cooling at a rate dependent of the annealing temperature, causes the formation of substructures different from those due to the polygonization of {alpha}-U. The substructures are indicated by the concentration of impurities on the dislocations induced by the stresses accompanying the allotropic transformation {gamma} {yields} {beta}. Similar treatment of the U-1.4% Cr alloy in which the {beta} phase is stabilized at room temperature, confirms this explanation. In addition to the polygonization substructures, sharp discontinuities can be observed in the network of sub- boundaries as a fine white edging. The comparison of these with the structure revealed by thermal etching in vacuum suggest that there are traces of the grain boundaries of the {gamma} phase. The method of etching followed by oxidation shows a haloed phase identified as UH{sub 3}. The conditions of appearance and disappearance of this phase are studied. The sensitivity of this method of detecting the last traces of H in U is very high. The dependence of the hydrogen content on the tensile properties of uranium metal was also studied. (author) [French] Une methode nouvelle d'examen micrographique de l'uranium a ete mise au point. Le polissage electrolytique et le 'gravage' sont effectues dans un bain acide acetique-acide chromique. L'oxydation atmospherique ou anodique de la surface polie conduit a la formation de couches epitaxiques d'oxyde. Cette methode est particulierement sensible aux faibles variations d

  18. Influence of heat treatment in {beta} and {gamma} phases on the microscopic structure of uranium; Influence des traitements thermiques en phases {beta} et {gamma} sur la structure micrographique de l'uranium

    Energy Technology Data Exchange (ETDEWEB)

    Robillard, A

    1958-06-02

    A new method of microscopic examination of uranium is described. Electrolytic polishing and etching are carried out in an acetic acid-chromic acid bath. Atmospheric or anodic oxidation of the polished surface produces films which follow exactly changes in the structure of the underlying metal. This method is very sensitive to small variations of orientation in polygonized crystals. Using this method of examination of uranium, it was found that annealing U in the {gamma} phase followed by a cooling at a rate dependent of the annealing temperature, causes the formation of substructures different from those due to the polygonization of {alpha}-U. The substructures are indicated by the concentration of impurities on the dislocations induced by the stresses accompanying the allotropic transformation {gamma} {yields} {beta}. Similar treatment of the U-1.4% Cr alloy in which the {beta} phase is stabilized at room temperature, confirms this explanation. In addition to the polygonization substructures, sharp discontinuities can be observed in the network of sub- boundaries as a fine white edging. The comparison of these with the structure revealed by thermal etching in vacuum suggest that there are traces of the grain boundaries of the {gamma} phase. The method of etching followed by oxidation shows a haloed phase identified as UH{sub 3}. The conditions of appearance and disappearance of this phase are studied. The sensitivity of this method of detecting the last traces of H in U is very high. The dependence of the hydrogen content on the tensile properties of uranium metal was also studied. (author) [French] Une methode nouvelle d'examen micrographique de l'uranium a ete mise au point. Le polissage electrolytique et le 'gravage' sont effectues dans un bain acide acetique-acide chromique. L'oxydation atmospherique ou anodique de la surface polie conduit a la formation de couches epitaxiques d'oxyde. Cette methode est particulierement sensible

  19. Evidence of final-state suppression of high-p{_ T} hadrons in Au + Au collisions using d + Au measurements at RHIC

    Science.gov (United States)

    Back, B. B.; Baker, M. D.; Ballintijn, M.; Barton, D. S.; Becker, B.; Betts, R. R.; Bickley, A. A.; Bindel, R.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; Gburek, T.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Harrington, A. S.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Khan, N.; Kulinich, P.; Kuo, C. M.; Lee, J. W.; Lin, W. T.; Manly, S.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Roland, C.; Roland, G.; Sagerer, J.; Sarin, P.; Sedykh, I.; Skulski, W.; Smith, C. E.; Steinberg, P.; Stephans, G. S. F.; Sukhanov, A.; Tonjes, M. B.; Trzupek, A.; Vale, C.; van Nieuwenhuizen, G. J.; Verdier, R.; Veres, G. I.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wysłouch, B.; Zhang, J.

    Transverse momentum spectra of charged hadrons with pT 2 GeV/c). In contrast, the d + Au nuclear modification factor exhibits no suppression of the high-pT yields. These measurements suggest a large energy loss of the high-pT particles in the highly interacting medium created in the central Au + Au collisions. The lack of suppression in d + Au collisions suggests that it is unlikely that initial state effects can explain the suppression in the central Au + Au collisions. PACS: 25.75.-q

  20. Caractérisation et tests de traitement des déchets ménagers et boues de vidange par voie anaérobie et compostage pour la ville de Kinshas

    OpenAIRE

    Mindele Ukondalemba, Léonard

    2016-01-01

    Dans les pays en développement (PED) en général et en République Démocratique du Congo en particulier, la problématique de l’assainissement (eaux usées et des déchets solides) constitue un enjeu majeur pour les spécialistes et les autorités locales. Cette thèse a comme objectif général de faire une évaluation de l’état des lieux et de dégager des pistes possibles de traitements des déchets solides et liquides en vue de protéger les populations et de s’orienter vers des traitements qui res...