Research of fragranced air, environmental aroma, to human and its application. Kankyo hoko no koka to sono oyo

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, S. (Shimizu Construction Co. Ltd., Tokyo (Japan))

1991-06-01

The effect of lemon, jasmine and lavender aroma on people was studied through environmental aroma experiments by 270 subjects in a meeting room for two months. As a result, the high percentage of positive responses was obtained on the sense of air cleanliness and efficiency of meetings, and a statistical significance was, in particular, obtained in the case of lemon as smoking was permitted. It was suggested that aroma had physiological and phychological effect even under conditions where the subjects were not necessarily aware of aroma. The effect of the same three aromas was also studied through experiments by 13 subjects in a VDT room for one month. As a result, the number of keypunch errors decreased in every aroma although punching speeds decreased slightly, and lemon showed a significant difference among three aromas. Based on these experimental results, the aroma generator was developed, and more than 30 environmental aroma systems combined with air conditioning ducts have been installed in Japan. 20 refs., 5 figs., 6 tabs.

Surface modification of biocompatible materials. Seitai tekigo zairyo no hyomen kaishitsu

Energy Technology Data Exchange (ETDEWEB)

Tateishi, T [Mechanical Engineering Lab., Tsukuba, Ibaraki (Japan)

1993-07-05

The necessary conditions for biocompatible materials such as human bone, joints and teeth are mainly classified into biological condition and mechanical conditions. The former condition is consisted of chemical stability without causing poisoning or allergy, compatibility of good biological tissue, no carcinogenesis and not antigenicity, no decomposition and degradation inside human body, not causing adsorbate or precipitate. As for the latter, appropriate static strength, elastic modulus and hardness together with the characteristics like fatigue resistance, wear resistance and lubricating properties are given. As for other conditions for biomaterials, characteristics as a functional material, workability, adhesion and so forth are important. When surface nitrification of sintered Ti, forging Ti, sintered Ti-6Al-4V and forging Ti-6Al-4V is carried out, the solubility is decreased significantly by surface nitrification. The powder generated by the wear of nitriding Ti-6Al-4V with ultra high molecular weight polyethylene (UHMWPE) is less cell poisoning than the powder caused by the wear of the other alumina, stabilized zirconia, hydroxy apatite with UHMWPE. 16 refs., 2 figs., 1 tab.

Uudised : Isaac Hayes loobub koka rollist. Bergeni festival soomestub

Index Scriptorium Estoniae

2006-01-01

Satiirilises animaseriaalis "South Park" mustanahalise koolikoka rollis lugenud soulilauljast Isaak Hayes'ist. 24. maist 6. juunini kestval Bergeni kultuurifestivalil Norras tulevad esitusele Jean Sibeliuse sümfooniad, Magnus Lindbergi heliteosed, koreograaf Tomi Paasoneni teos "Olotila" ja pianist Juho Pohjoneni klverikontsert

Towards an optimal integrated reservoir system management for the Awash River Basin, Ethiopia

Science.gov (United States)

Müller, Ruben; Gebretsadik, Henok Y.; Schütze, Niels

2016-05-01

Recently, the Kessem-Tendaho project is completed to bring about socioeconomic development and growth in the Awash River Basin, Ethiopia. To support reservoir Koka, two new reservoirs where built together with extensive infrastructure for new irrigation projects. For best possible socioeconomic benefits under conflicting management goals, like energy production at three hydropower stations and basin wide water supply at various sites, an integrated reservoir system management is required. To satisfy the multi-purpose nature of the reservoir system, multi-objective parameterization-simulation-optimization model is applied. Different Pareto-optimal trade-off solutions between water supply and hydro-power generation are provided for two scenarios (i) recent conditions and (ii) future planned increases for Tendaho and Upper Awash Irrigation projects. Reservoir performance is further assessed under (i) rule curves with a high degree of freedom - this allows for best performance, but may result in rules curves to variable for real word operation and (ii) smooth rule curves, obtained by artificial neuronal networks. The results show no performance penalty for smooth rule curves under future conditions but a notable penalty under recent conditions.

Surface design of powder by precise modification; Kotai hyomen no seimitsuna kaishitsu seigyo

Energy Technology Data Exchange (ETDEWEB)

Chikazawa, Masatoshi

1999-01-01

The progress of the recent technology is it in high performance, the one manufactured by development of the high function material. It is skillful, and the nature of this effective material is greatly influenced by the various materialities of the raw material powder and a function again. Therefore, the moment it diversifies all the more from now on, a demand for the raw material powder is thought to become more precise control than the thing of the materiality of the powder and the function. Precise quality function technology on the surface of the powder which should make the materiality of the purpose and a functional expression possible is very important to meet such a requirement. Quality silica powder is used as the sample, and you must investigate about the micro-mechanism of the water control by effective based quality of surface from such a position. (NEDO)

Towards an optimal integrated reservoir system management for the Awash River Basin, Ethiopia

Directory of Open Access Journals (Sweden)

R. Müller

2016-05-01

Full Text Available Recently, the Kessem–Tendaho project is completed to bring about socioeconomic development and growth in the Awash River Basin, Ethiopia. To support reservoir Koka, two new reservoirs where built together with extensive infrastructure for new irrigation projects. For best possible socioeconomic benefits under conflicting management goals, like energy production at three hydropower stations and basin wide water supply at various sites, an integrated reservoir system management is required. To satisfy the multi-purpose nature of the reservoir system, multi-objective parameterization-simulation-optimization model is applied. Different Pareto-optimal trade-off solutions between water supply and hydro-power generation are provided for two scenarios (i recent conditions and (ii future planned increases for Tendaho and Upper Awash Irrigation projects. Reservoir performance is further assessed under (i rule curves with a high degree of freedom – this allows for best performance, but may result in rules curves to variable for real word operation and (ii smooth rule curves, obtained by artificial neuronal networks. The results show no performance penalty for smooth rule curves under future conditions but a notable penalty under recent conditions.

The Study of Africa: A challenge for the African Renaissance | Koka ...

African Journals Online (AJOL)

It is said, according to the Afrikan Proverb: “Until the Lions have their own historians tales of hunting will always glorify the hunter.” That is, not until Afrika can have its own scholars to present her case in world forums it will always suffer from mis-interpretations, misrepresentations and mis-presentations of her views and ...

Nonlinear effect in vibroseis data; Vibroseis kiroku ni oite mitomerareru hisenkei koka

Energy Technology Data Exchange (ETDEWEB)

Saeki, T [Japan National Oil Corp., Tokyo (Japan)

1997-05-27

This paper describes nonlinear effect recognized in Vibroseis data. Harmonics is a wave of frequency in integer factors generated in association with basic sweep vibrated by Vibroseis. Harmonics is generated because vibration in the vicinity of seismic source contains nonlinear terms. Seismic exploration using the reflection method often discusses propagation of seismic waves hypothesized as a linear phenomenon. Vibroseis data analysis, however, requires evaluation of the effect of the harmonics on accuracy. Vibroseis investigation measures may be taken by eliminating n-order harmonics by using the phase control method, and generating seismic source sweep in which the phase is shifted by 180/(n-1) each time in order to leave the basic sweep. Methods to increase the sweep length include a method to expel strain to a location outside the range of the subject travel time. Up-sweep (a sweep changing from low frequencies to higher frequencies) is also a means capable of avoiding harmonics effects. Vibroseis investigations currently performed adopt this method frequently because of it having little technological and economic problems. 10 refs., 3 figs.

Photo-irradiation effects on GaAs atomic layer epitaxial growth. GaAs no genshiso epitaxial seicho ni okeru hikari reiki koka

Energy Technology Data Exchange (ETDEWEB)

Mashita, M.; Kawakyu, Y.; Sasaki, M.; Ishikawa, H. (Toshiba Corp., Kawasaki (Japan). Research and Development Center)

1990-08-10

Single atomic layer epitaxy (ALE) aims at controlling a growing film at a precision of single molecular layer. In this article, it is reported that the growth temperature range of ALE was expanded by the vertical irradiation of KrF exima laser (248 nm) onto the substrate for the ALE growth of GaAs using the metalorganic chemical vapor deposition (MOCVD) method. Thanks for the results of the above experiment, it was demonstrated that the irradiation effect was not thermal, but photochemical. In addition, this article studies the possibility of adsorption layer irradiation and surface irradiation as the photo-irradiation mechanism, and points out that coexistence of both irradiation mechanisms can be considered and, in case of exima laser, strong possibility of direct irradiation of the adsorption layer because of its high power density. Hereinafter, by using both optical growth ALE and thermal growth ALE jointly, the degree of freedom of combination of hetero ALE increases and its application to various material systems becomes possible. 16 refs., 6 figs.

Surface structures and optical functions of living things. Seibutsu no hyomen kozo to kogaku kino

Energy Technology Data Exchange (ETDEWEB)

Kumazawa, K.; Takimoto, J.; Tanaka, S.; Tabata, H. (Nissan Motor Co. Ltd., Tokyo (Japan))

1993-12-24

This paper describes the following matters as one example of structural coloring of non-motional nature on the coloring mechanism in wings of Morpho sulkouskyi butterfly: The structure of scales on butterfly wings may be modelled into such a structure of a right angle frame of reference having a cyclic arrangement (with an interval of 0.7 [mu]m) of a zigzagged protrusion in the 'x' direction called a ridge (with a height of 1.8 [mu]m and a width of 0.54 [mu]m, the shape not changing in the 'y' direction), and having a plurality of protrusions of a ridge form called lamella in the 'z' (height) direction. A simple multi-layered thin film model was assumed that has lamella layers and air layers laminated alternately in the 'z' direction. The model was used to calculate reflection spectra on vertically incident light based on thickness and refractive index of material layers determined by a structural analysis of the scales. The result was considerably close to the reflection spectra of scales measured by using a microscopic spectrophotometer when the number of layers is set to six. The paper describes briefly examples of motility structural coloring (skin cells of rainbow color in tropical fish). 7 refs., 12 figs.

Fiscal 2000 achievement report on the venture business assisting type regional consortium-Core industry creation type. Development of radiation detector utilizing surface reforming effect of irradiation; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. Hoshasen shosha ni yoru hyomen kaishitsu koka wo mochiita hoshasen kenshutsuki no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

It has been clarified that the use of some kinds of semiconductor films, such as a rutile type titanium oxide film or a zirconium oxide film, results in a stable photocatalytic reaction in an intensive radioactivity region. In this effort, the effect is applied for the development of a FET (field effect transistor) type radiation detector capable of stable operation under high dose irradiation circumstances. Semiconductor materials such as a rutile type titanium oxide were subjected to irradiation tests on the ground, in which changes in their physical properties such as wettability or conductance were examined and the mechanism of surface reforming under irradiation was elucidated, and proper materials were selected. A prototype high radiation detector was fabricated that covers a 1mGy/hr-4kGy/hr region. For the establishment of a technology for growing spherical semiconductor crystals under microgravity, basic experiments were conducted using a free-fall facility at the Japan Microgravity Center. Basic experiments were conducted for the fabrication of a prototype radiation detector to operate in a high radiation region from 0.1kGy/hr to 2kGy/hr and beyond, and a prototype spherical semiconductor radiation detector was fabricated. Achievements of the effort are mentioned above. (NEDO)

Improvement of In2O3-based CO sensor by using surface modifiers; Hyomen shushokuzai ni yoru sanka injiumukei soshi no CO kenchi tokusei no kaizen

Energy Technology Data Exchange (ETDEWEB)

Yamaura, H.; Miura, N.; Amaze, N. [Kyushu University, Fukuoka (Japan); Tamaki, J. [Ritsumeikan University, Kyoto (Japan); Moriya, K. [Osaka Gas Co. Ltd., Tokyo (Japan)

1998-02-01

Aiming at developing a semiconductor CO sensor applicable to the safety control of gas appliances, we carried out an extensive material search for promoters to In2O3-based elements. Among the elements added (0.5 wt%) with each of 12 transition metal oxides, the Co3O4-added one was outstanding in sensitivity and selectivity to CO at 200degC. Remarkably the sensing properties of this element could be improved further by the addition of Au (0.04 wt%). The doubly promoted element, Au(0.04 wt%)-Co(0.5 wt%)-In2O3, gave excellent characteristics in sensitivity to CO, selectivity to CO over H2 and other selected gases, and response rates at 250degC. The promoting effects of the additives were shown to originate from the proper enhancement of catalytic activity for CO oxidation. 11 refs., 9 figs.

Achievement report for fiscal 1997 (New Sunshine Project) on the development of superconductor power application technology. Research on a total system / investigative research on introduction effects; 1997 nendo chodendo denryoku oyo gijutsu kaihatsu (New Sunshine keikaku) seika hokokusho. Total system nado no kenkyu / donyu koka no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

This paper describes investigation and discussion on effects of introducing a superconductor power application technology. The generator sub-committee has compared features, technical problems and development expenses in the first and second proposals, but has not reached the final conclusion. The first proposal is targeted for early realization of 200-300 MW class generators with development cost of six to seven billion yen and a development term of seven years. These developments raise largely towards practical application the levels of material technologies, fabrication and processing technologies, and analysis and design technologies. The second proposal is intended of developing 200-300 MW class generators targeted for increased diameter, as a reduced size machine of a 600-MW generator being a future generator. It will take development cost of eight to nine billion yen with the period of nine years for the development. Majority of the technologies required for developing the future 600-MW class generator can be demonstrated. The AC superconductor device sub-committee has investigated design examples, clarified the specification requirements, and investigated and studied the development measures. The oxide superconductor sub-committee has investigated and studied making wires and conductors, and device application feasibility, but has not reached the stage of presenting specific research and development methods. The practical application strategy sub-committee has also not been able to present a collective measure because of difficulty of making future prospect on the electric power business. (NEDO)

Mechanism of adhesion of epoxy resin to steel surface; Tekko hyomen to epoxy jushino secchaku mechanism

Energy Technology Data Exchange (ETDEWEB)

Nakazawa, M. [Nippon Steel Corp., Tokyo (Japan)

1994-08-01

In the present research, an adhesion-breaking test and a molecular-scale model experiment were conducted to elucidate the adhesion mechanism of epoxy resin (R) to the cold rolled steel sheet (CR) and galvanized steel sheet (GI). As for the adhesive joint strength in the humid environment, the GI is inferior in residual strength to the CR. The GI joint fracture is an interfacial fracture between the plating and adhesive agent, while the CR joint fracture is a combination of cohesive fracture and interfacial fracture. It is attributable to the difference in adhesion mechanism of R and degradation due to humidity between the surface solely of zinc and iron-containing surface. The adhesion state of R to the zinc oxide and iron oxide was observed by temperature-programed desorption in an ultrahigh vacuum. On each of both oxides, the R chemically adsorbs through bond scission between the phenoxy oxide and carbon. If the water dissociatively adsorbs onto the surface, the bond is destroyed between the zinc oxide and R. The formation of interfacial chemical bond contributes to the adhesion of R to the CR and GI. In case of GI, this band is destroyed by the interfacial infiltration of water, while it is not done in case of CR. The CR excels the GI in adhesive durability. 20 refs., 8 figs., 3 tabs.

Catalyst surface characterized by high magnetic field NMR; Kojiba NMR ni yoru shokubai hyomen no kansatsu

Energy Technology Data Exchange (ETDEWEB)

Sato, S. [Chiba University, Chiba (Japan). Faculty of Engineering

1997-08-01

This paper introduces studies performed by the authors on observation of surface of solid catalysts by means of solid NMR measurement using the high-speed MAS technology which uses a high magnetic field device. In the studies, a device with 14.1T (resonant frequency of proton at 600 MHz) was used to conduct CP-MAS NMR measurement on {sup 29}Si to identify bonding of silica carrier in a fixed aluminum chloride catalyst. As a result, it was verified that the surface structure of aluminum chloride species deposited on the silica carrier turns to a structure in which AlCl2 species of a monomeric substance is bonded with a surface hydroxyl group and fixed in four- or five-orientation. When adjusted at low temperatures, an Al2Cl5 structure is formed, which is fixed as a dimeric substance with AlCl3 oriented in the AlCl2 species. It is conceived that the Al2Cl5 species has higher electrophilicity than the AlCl2 species as a result of AlCl3 oriented in AlCl2, whereas the hydroxyl group on the silica surface oriented with the Al2Cl5 species dissociates, discharging protons, thus showing strong acidity. 18 refs., 8 figs., 2 tabs.

Hydrology and Mosquito Population Dynamics around a Hydropower Reservoir in Africa

Science.gov (United States)

Endo, N.; Eltahir, E. A.

2013-12-01

Malaria is associated with dams because their reservoirs provide mosquitoes, the vector of malaria, with permanent breeding sites. The risk of contracting malaria is likely to be enhanced following the increasing trend of hydropower dam construction to satisfy the expanding energy needs in developing countries. A close examination of its adverse health impacts is critical in the design, construction, and operation phases. We will present results of extensive field studies in 2012 and 2013 around the Koka Reservoir, Ethiopia. The results uncover the importance of reservoir management especially after the rainy seasons. Furthermore, we show the capability of a newly modified hydrology, entomology and malaria transmission simulator, HYDREMATS (Bomblies et al, 2008), and its potential as a tool for evaluating environmental management strategies to control malaria. HYDREMATS was developed to represent how the hydrology in nearby villages is impacted by the reservoir system, and the role of different types of vector ecologies associated with different Anopheles mosquito species. The hydrology component of HYDREMATS simulates three different mosquito breeding habitats: rain-fed pools, groundwater pools, and shoreline water. The entomology component simulates the life cycles of An. funestus and An. arabiensis, the two main vectors around the reservoir. The model was calibrated over the 2012-2013 period. The impact of reservoir water level management on the mosquito population is explored based on numerical model simulations and field experiments.

FY 1996 report on the results of the development of superconductor power application technology. Study of a total system, etc. (Investigational study of the introductory effect); 1996 nendo chodendo denryoku oyo gijutsu kaihatsu seika hokokusho. Total system nado no kenkyu (donyu koka no chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Under the secondary interim assessment made in FY 1995 between the assessment committee of the energy/environment technology development sectional meeting of the Industrial Technology Deliberation Council and NEDO, in this project, the following were conducted in FY 1996: study of trial manufacture of superconductor motor model machine and R and D of element technology (conductor technology/refrigerator technology). The study was proceeded mainly with Super-GM, and as to the motor, the preparation for test on a part of the model machines was finished. Considering FY 1998 which is the final year of this project, the investigational study in FY 1996 aims at accumulating/arranging/analyzing the data which help judge how to proceed with the future R and D of superconductor power application technology continuously based on the secondary interim assessment. For superconductor motor and various superconductor power appliance, economical/technical feasibilities and methods of R and D and surveys of trends in Japan and abroad for the R and D were made important items. Further, 'R and D of the basement of superconductor power application' proposed in the secondary interim assessment (R and D of the combination of elements which become the basement of equipment technology over a stage of parallel R and D of element technology of conductor, etc.) targeted the presentation of concrete details. (NEDO)

FY 1996 report on the results of the development of superconductor power application technology. Study of a total system, etc. (Investigational study of the introductory effect); 1996 nendo chodendo denryoku oyo gijutsu kaihatsu seika hokokusho. Total system nado no kenkyu (donyu koka no chosa kenkyu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Under the secondary interim assessment made in FY 1995 between the assessment committee of the energy/environment technology development sectional meeting of the Industrial Technology Deliberation Council and NEDO, in this project, the following were conducted in FY 1996: study of trial manufacture of superconductor motor model machine and R and D of element technology (conductor technology/refrigerator technology). The study was proceeded mainly with Super-GM, and as to the motor, the preparation for test on a part of the model machines was finished. Considering FY 1998 which is the final year of this project, the investigational study in FY 1996 aims at accumulating/arranging/analyzing the data which help judge how to proceed with the future R and D of superconductor power application technology continuously based on the secondary interim assessment. For superconductor motor and various superconductor power appliance, economical/technical feasibilities and methods of R and D and surveys of trends in Japan and abroad for the R and D were made important items. Further, 'R and D of the basement of superconductor power application' proposed in the secondary interim assessment (R and D of the combination of elements which become the basement of equipment technology over a stage of parallel R and D of element technology of conductor, etc.) targeted the presentation of concrete details. (NEDO)

1-12 Soil Fertility in Koka Nagawo Area of Lumme District in East Shoa

African Journals Online (AJOL)

tosheba

Abstract: For designing proper soil fertility management interventions, locally ... District in East Shoa Zone of Oromia Regional State, Ethiopia, based on ..... Selected soil physico-chemical properties across different land units. ..... facilitating the study and the research work. 6. ... Characteristics of the Soils of the North-western.

Analysis and scavenging effect of acid fog. Sanseimu no kagaku sosei to senjo koka

Energy Technology Data Exchange (ETDEWEB)

Igawa, M.; Hoka, E.; Hosono, T.; Iwase, K.; Nagashima, T. (Kanagawa University, Yokohama (Japan). Faculty of Engineering)

1991-05-10

Fog samples were collected for analysis at Mt. Ohyama, the east edge of Tanzawa Mountains in the southwest of Kanto plains. Then, rainwater and aerosol that becomes the core of droplet were analyzed and measured values were compared. As a result, the pH value of the fog samples for 2 years from 1988 to 1990 ranged between 2.6 and 7.0, and the mean pH value was 3.95. According to the measurement of major component concentration of fogwater, rainwater, and aerosol, it was found that concentration of fogwater changed significantly depending on the day but every ion concentration was higher than that of rainwater. The equivalent concentration ratio of sulfuric acid, nitric acid, and chloride ions were almost equal. The concentration value of fogwater varied a lot with the course of time and became higher during the formation and the dissipation of fog. Through the analysis of such changes, atmospheric scavenging effect of precipitation of fogwater upon the trees and the earth surface was observed. It means that pollutants with high concentration were loaded on the plants and the earth surface. 23 refs., 5 figs., 2 tabs.

Characterization of surface layers of aluminum alloys for automobile body panels; Jidoshayo aluminium gokin no hyomen kaiseki

Energy Technology Data Exchange (ETDEWEB)

Mizuno, K; Takagi, Y [Nippon Steel Corp., Tokyo (Japan)

1996-03-29

This paper reports analytical examples, on an oxidized film on the surface of aluminum alloys for automobiles, using the conventional method for a surface analysis or a new method entirely different from it. For example, (1) a new method was proposed which evaluated the thickness of MgO layers on the surface of Al-Mg alloy by means of a colorimeter. In the case where the thickness of the oxidized film was several tens of nanometers or less, the chromatic value of L, b, etc., and the thickness of the films were in one-to-one correspondence to each other; therefore, the MgO film was easily estimated non-destructively by measuring the chromatic values of the surface. (2) An analysis was made on the state of adhesion of the organic matters in the oxidized film on Al-Mg-Si alloy by means of an angle-resolved XPS (X-ray photoelectron spectroscopy) depth analysis. Consequently, it was elucidated that a fatty film adhered with hydrophilic groups faced to the oxidized surface and with hydrophobic groups faced to the outside, and that this adhered fatty acid also formed a metallic soap by a heat treatment, deteriorating the fattiness. Further, the paper also reports on the analysis of crystal structures on the surface layer with the use of GIXD (grazing incidence-angle X-ray diffraction). 22 refs., 15 figs.

Application of vertical electrical sounding combined with induced polarization method in ground water exploration; IP koka wo koryoshita hiteikoho suichoku tansa no chikasui chosa eno tekiyo

Energy Technology Data Exchange (ETDEWEB)

Kondo, M; Sakurada, H [Sumiko Consultants Co. Ltd., Tokyo (Japan); Suzuki, T [Hokkaido Development Bureau, Hokkaido Development Agency, Sapporo (Japan)

1996-10-01

For ground water exploration using vertical Schlumberger exploration method, measurement and analysis combined with induced polarization (IP) effect were conducted as trial. For the Schlumberger method, potential is measured at the center between potential electrodes during flow of dc current between current electrodes. In the case of vertical exploration, measurements are repeated with fixed potential electrodes by extending the distance between current electrodes. Ground water exploration was conducted using this method at Otaki village, Hokkaido. Geology of surveyed plateau consists of a basement of Pliocene tuffs and Quaternary Pleistocene sediments covering on the surface. For the results of analysis, four to seven beds were detected from the resistivity. The depth up to the lowest bed was between 25 and 85 m, the resistivity of each bed was between 9 and 8,000 ohm{times}m, and the polarizability was between 1 and 15 mV/V. Among these resistivity zones, it was judged that zones satisfying following three conditions correspond to coarse grain sediments saturated with ground water, and can be expected as aquifers; having resistivity ranging between 100 and 1,000 ohm{times}m, polarizability higher than 10 mV/V, and relatively large thickness. 11 refs., 6 figs.

Dielectric heating. Industrial applications; Chauffage dielectrique. Applications industrielles

Energy Technology Data Exchange (ETDEWEB)

Roussy, G. [Nancy-1 Univ. Henri Poincare, Dir. de Recherche 54 (France); Rochas, J.F. [Societe Sairem, 75 - Paris (France); Oberlin, C. [Electricite de France (EDF), Div. de Recherche, 75 - Paris (France)

2003-11-01

The heating of insulating or badly power conducting products using high frequency (HF) electromagnetic waves and microwaves (MW) is used in several industrial applications. This article presents some examples of conventional or recent applications of dielectric heating in the industry: 1 - selection criteria between HF and MW heating systems; 2 - HF applications: traditional applications (wood forming and sticking, welding of thermoplastic materials, drying of textile materials, correction of the humidity profile in the paper industry, end-baking of biscuits in the food industry), recent applications (over-moulding of automotive glazing materials, gluing and moulding of plastic parts in the automotive industry, drying of the coating of textile ropes), innovative applications; 3 - microwave applications: traditional applications (moderating of frozen meat by 915 MHz microwaves, drying of coatings on polystyrene or sand core models for foundry, pre-vulcanization of rubber sections, 2450 MHz pasteurization of pumpable products with morsels), examples of recent applications (continuous dehydration in vacuum, MW assisted granulator-dryers in the pharmaceutical industry, decontamination of hospital wastes), examples of innovative applications in the chemical sector, applications in progress; 4 - conclusion. (J.S.)

Studies on reactivity of coal surfaces at low temperature; Teion ni okeru sekitan hyomen no hannosei no kento

Energy Technology Data Exchange (ETDEWEB)

Yasuda, H.; Kaiho, M.; Yamada, O.; Soneda, Y.; Kobayashi, M.; Makino, M. [National Institute for Resources and Environment, Tsukuba (Japan)

1996-10-28

With an objective to learn reactivity of coal at its surface, surfaces of oxidized coal samples were investigated. Miike coal was oxidized by using {sup 18}O2 in a closed loop system. As the reaction progresses, proportion of CO2 including isotopes increased rapidly as a result of oxidation of CO sites existing in the coal and the newly generated C{sup 18}O sites. The oxidizing reaction progressed via oxygen adsorbing sites generated near the surface, and oxygen containing groups. An FT-IR analysis estimated the depth of the oxidized layer to be 10{mu}m or less from particle surface. The oxidized coal was pulverized to see its surface condition. Functional groups introduced by the oxidation enter into the vicinity of the surface in a form to desorb as CO. CO2 is trapped in inner pores. The coal surface was observed by using an atomic force microscope. No observable openings in the pore structure were discerned on the surface before the oxidation, and the structure agrees with a closed pore model. Surface image oxidized in-situ by oxygen for one hour had slight roundness, which led to a supposition of structural change, and changes in the functional group and adsorption species. 7 refs., 5 figs.

Surface tension of a coal extract in an organic solvent; Sekitan chushutsu seibun no kaigo to hyomen choryoku

Energy Technology Data Exchange (ETDEWEB)

Kikuchi, T.; Hayasaka, K.; Takanohashi, T.; Iino, M. [Tohoku University, Sendai (Japan). Institute for Chemical Reaction Science

1996-10-28

The behavior and properties of associated bodies were studied through measurement of surface tension considering acetone-soluble fraction relatively light among various solvent extracts of coal. In experiment, the acetone-soluble fraction was extracted from the substances extracted from Upper Freeport coal as standard specimen using the mixed solvent of carbon disulfide (CS2) and N-methyl-2-pyrrolidinone (NMP), and it was dissolved into NMP after drying. Surface tension was measured by Wilhelmy method. The experimental results are as follows. Equilibrium surface tension is equal to the surface tension of pure solvent in a low concentration range of solution, and decreases with an increase in concentration approaching a fixed value at 0 in log concentration, nearly showing an S curve. Adsorption of species with non-polar aromatic ring of the acetone-soluble fraction on a solution surface probably decreases surface tension. Change with time in surface tension is observed which suggests fast initial reaction and slow subsequent reaction. 4 figs.

Effect of fall wind on wind power generation; Furyoku hatsuden ni okeru dashikaze no koka

Energy Technology Data Exchange (ETDEWEB)

Nagai, H [Nihon University, Tokyo (Japan)

1997-11-25

Wind conditions in Arakawa Town, Niigata Prefecture, were surveyed by anemometers and anemoscopes installed at 3 different points, and the data are analyzed to develop the prediction model for investigating possibility of introduction of wind mills there. Outlined herein is power generated by fall wind by comparing predicted power availability with the actual results. In order to investigate possibility of power generation by fall wind, the wind conditions and power availability are simulated using the observed wind condition data. Predicted wind velocity involves a large error at a point where frequency of prevailing wind direction is high, and direction in which average wind velocity is high coincides with direction in which land is slanted at a high slope. Fall wind occurs locally for geographical reasons. Location of the wind mill must be carefully considered, because it is complex, although potentially gives a larger quantity of power. A wind mill of 400kW can produce power of around 600MWh annually, when it is located at the suited site confirmed by the wind condition analysis results. 6 refs., 5 figs., 6 tabs.

Applicant Perspectives on the Otolaryngology Residency Application Process

Science.gov (United States)

2017-09-09

ndorsing, Suggestion No.(%) (n=98) Establish a hard cap on the number of applications 43 (43.8) altov:ed per applicant Increase information and...Applicants are overall amenable to a hard cap on applications • Applicants are interested in being part of the solution to the problem References...better the chances of match·ng. Alch Otoo1yngo/ Head~:< Surg_ 2008: 4 34(10)·1038. 3. Christophel JJ. Levine PA Too much of .a good thing . lAMA

Global environmental benefits of industrial heat pumps (fiscal 1993); 1993 nendo koon heat pumping gijutsu ni yoru chikyu ondanka keigen koka ni kansuru chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-03-01

An investigational study was conducted aiming at making a quantitative grasp of effects of the spread of industrial heat pumps on energy conservation and greenhouse gas reduction and at promoting the spread. Finally, the following eight countries joined this international joint research: Canada, France, Japan, Holland, Norway, Sweden, the U.K. and the U.S. Each country share the work and expenses for the research with each other. Japan made investigational researches on the application of heat pumps to processes of the chemical industry, oil refining industry, food industry, paper/pulp industry, and dyeing/weaving industry, and on the effects of greenhouse gas reduction. As procedures taken, values up to 2010 were estimated of energy prices in each country, energy supply/demand, rates of the heat source configuration for electric power supply, etc., the heat flow of the above-mentioned process was made clear, and analyses were conducted of annual profits, energy consumption, and depreciation period in the case of adopting heat pumps. Moreover, the energy conservation amount and greenhouse effect gas reduction amount were estimated based on the result of the analyses. 69 figs., 196 tabs.

Institutional trust in the national social security and municipal healthcare systems for the elderly in Japan.

Science.gov (United States)

Murayama, Hiroshi; Taguchi, Atsuko; Ryu, Shuhei; Nagata, Satoko; Murashima, Sachiyo

2012-09-01

Japanese social security systems and institutions for the elderly, as well as the general attitude toward elderly care services among the Japanese population, have been undergoing a dramatic change. By examining the association between institutional trust, which is a representative element of social capital, and anxiety regarding receiving elderly care, we can uncover clues toward building a more robust social security system for the elderly. This study examines the relationship between institutional trust, in the national social security and municipal healthcare systems for the elderly, and anxiety with respect to receiving elderly care among the general Japanese population. A cross-sectional survey was conducted using a self-administered questionnaire that was returned by mail in January and February 2005. The target population was 4735 community residents aged 20-75 years, who lived in the city of Koka, Shiga, Japan. A total of 2264 questionnaires were included in the analysis. A binominal logistic regression analysis showed that responses of 'trust' [odds ratio (OR): 2.09, 95% confidence interval (95% CI): 1.01-4.30] and 'strongly trust' (OR: 3.80, 95% CI: 1.55-9.31) for the national system were associated with not having anxiety regarding elderly care, compared with the reference category of feeling strongly distrust. However, trust in the municipal system showed no association with this anxiety. These results indicate the importance of developing strategies to increase a common trust in the national care services for the elderly to reduce the anxiety people feel regarding whether they will be able to receive elderly care when required.

Study of QoS control and reliable routing method for utility communication network. Application of differentiated service to the network and alternative route establishment by the IP routing protocol; Denryokuyo IP network no QoS seigyo to shinraisei kakuho no hoho. DiffServ ni yoru QoS seigyo no koka to IP ni yoru fuku root ka no kento

Energy Technology Data Exchange (ETDEWEB)

Oba, E.

2000-05-01

QoS control method which satisfies utilities communication network requirement and alternative route establishment method which is for sustaining communication during a failure are studied. Applicability of DiffServ (Differentiated Service), one of the most promising QoS control method on IP network and studying energetically in IETF WG, is studied and it is found most application used in the utility communication network except for relaying system information could he accommodated to the DiffServ network. An example of the napping of the utility communication applications to the DiffServ PHB (Per Hop Behavior) is shown in this paper. Regarding to the alternative route, usual IP routing protocol cannot establish alternative route which doesn't have common links and nodes in their paths for a destination. IP address duplication with some modification of routing protocol enables such alternative route establishment. MPLS, distance vector algorithm and link state algorithm are evaluated qualitatively, and as a result, we found MPLS is promising way to establish the route. Quantitative evaluation will be future work. (author)

Applicant Perspectives on the Otolaryngology Residency Application Process.

Science.gov (United States)

Ward, Matthew; Pingree, Christian; Laury, Adrienne M; Bowe, Sarah N

2017-08-01

It has been nearly 25 years since medical students were queried regarding their perspectives on otolaryngology-head and neck surgery (OHNS) residency selection. Understanding this viewpoint is critical to improving the current application process. To evaluate the perceptions of 2016 OHNS residency applicants regarding the application process and offer suggestions for reform. In this cross-sectional study of anonymous online survey data, a 14-question survey was designed based on resources obtained from a computerized PubMed, Ovid, and GoogleScholar database search of the English language from January 1, 1990, through December 31, 2015, was conducted using the following search terms: (medical student OR applicant) AND (application OR match) AND otolaryngology. The survey was administered to 2016 OHNS residency applicants to examine 4 primary areas: current attitudes toward the match, effect of the new Otolaryngology Program Directors Organization personal statement mandate, sources of advice and information, and suggestions for improvement. In January 2016, an email was sent to 100 program directors asking them to distribute the survey to current OHNS applicants at their institution. One follow-up reminder email was sent in February 2016. A link to the survey was posted on the Otomatch.com homepage on January 28, 2016, with the last response received on March 28, 2016. Survey responses regarding the residency application process. A total of 150 of 370 residency applicants (40.5%) responded to the survey. Of these, 125 respondents (90.6%) noted applying to programs in which they had no specific interest simply to improve their chances of matching. Applicants intended to apply to more programs than they actually did (63.6 vs 60.8; r = 0.19; 95% CI, -0.03 to 0.40). Program directors advised fewer applications than other sources; however, 58 respondents (38.7%) did not receive advice from a program director. A total of 121 respondents (80.7%) found online program

Application architecture for .NET designing applications and services

CERN Document Server

Microsoft. Redmond

2003-01-01

Get expert architectural and design-level guidance for building distributed solutions with the Microsoft® .NET Framework-learning how to synthesize your knowledge of application development, servers, and infrastructure and business requirements. This guide assumes you are familiar with .NET component development and the basic principles of a layered distributed application design. It examines architectural issues and solution design for a range of project stakeholders-whether you build and design applications and services, recommend appropriate technologies and products for applications and s

Investigation into the emission of greenhouse effect gases; Onshitsu koka gas no haishutsu ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The paper grasped the situation of greenhouse effect gas emissions of advanced countries based on the reports from them. The advanced countries which concluded the U.N. Framework Convention on Climate Change (OECD member countries, the former U.S.S.R., and East European countries) are to be reported to the office concerned with work for the framework the situation of their greenhouse effect gas emissions according to the obligation of the framework. In and after April 1997, they made the second report. The paper summarized changes in emission amount, the future trend, and the policies/measures mainly taken of nine countries which have already presented the second report (the U.S., the U.K., Germany, Holland, Italy, Norway, Sweden, Finland, and New Zealand) and one country (Russia) which has made only the first report. Moreover, the literature was collected and summed up concerning the mechanism and coefficients of the emission of nitrous oxide and methane. The collected literature was classified into all fields/plural number of fields, energy relation, industrial process relation, relation with the use of organic solvent and other products, agricultural relation, relation with changes in land use and forests, and waste relation. 4 figs., 228 tabs.

Development of sound absorption measuring system with acoustic chamber; Kogata kyuon koka sokutei sochi no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Takahira, M.; Noba, M. [Toyota Motor Corp., Aichi (Japan); Matsuoka, H. [Nippon Soken, Inc., Tokyo (Japan)

1998-05-01

In order to measure sound absorption performance necessary to develop sound absorption materials, development was made on a device consisting of a small sound box capable of measurement inexpensively and easily, as a measure against the reverberation chamber method. In order to obtain stabilized diffusion sound internally, the sound box has a shape of asymmetric seven-side body in which sides do not face squarely with each other. The box was so sized that a large number of resonant vibration postures can be constituted at the targeted frequency simultaneously in the box. The box has a commercially available cone speaker with good acoustic output characteristics in frequency range of higher than 500 Hz installed on an inner side of the box. The sound source uses a method to derive sound absorption rate from difference of sound pressure levels. In order to eliminate need of averaging treatment by using a multi-point measurement inside the box, a discussion was given to provide an opening on part of the box to place the sound receiving point outside the opening. A square test piece is placed on the floor 0.5 meter or more away from the speaker in the box. As a result of the experiment, it was verified that the sound absorption rate obtained by this device corresponds well with that by the reverberation chamber method. The size of the test piece was also found adequate. 2 refs., 11 figs., 1 tab.

Autosolvent effect of bitumen in thermal cracking; Netsubunkai hanno ni okeru bitumen no jiko yobai koka

Energy Technology Data Exchange (ETDEWEB)

Mikuni, M.; Sato, M.; Hattori, H. [Hokkaido University, Sapporo (Japan). Center for Advanced Research of Energy Technology; Nagaishi, H.; Sasaki, M.; Yoshida, T. [Hokkaido National Industrial Research Institute, Sapporo (Japan)

1996-10-28

Tar sand bitumen is petroleum-based ultra-heavy oil, and has a great amount of reserve like coal. However, there are still a lot of problems for its highly effective utilization. This paper discusses whether the light components in bitumen show independent behavior during the thermal cracking of heavy components, or not. Solvent effect and reaction mechanism during the thermal cracking are also derived from the change of their chemical structures. Athabasca tar sand bitumen was separated into light and heavy fractions by vacuum distillation based on D-1660 of ASTM. Mixtures of the both fractions at various ratios were used as samples. Negative effect of the light fraction on cracking of the heavy fraction was observed with dealkylation and paraffin formation Polymerization of the dealkylated light fraction to the heavy fraction was suggested due to lack of hydrogen in the thermal cracking under nitrogen atmosphere, which resulted in the formation of polymer. 3 refs., 6 figs.

Comparing Web Applications with Desktop Applications: An Empirical Study

DEFF Research Database (Denmark)

Pop, Paul

2002-01-01

In recent years, many desktop applications have been ported to the world wide web in order to reduce (multiplatform) development, distribution and maintenance costs. However, there is little data concerning the usability of web applications, and the impact of their usability on the total cost...... of developing and using such applications. In this paper we present a comparison of web and desktop applications from the usability point of view. The comparison is based on an empirical study that investigates the performance of a group of users on two calendaring applications: Yahoo!Calendar and Microsoft...... Calendar. The study shows that in the case of web applications the performance of the users is significantly reduced, mainly because of the restricted interaction mechanisms provided by current web browsers....

Language Modelling for Collaborative Filtering: Application to Job Applicant Matching

OpenAIRE

Schmitt , Thomas; Gonard , François; Caillou , Philippe; Sebag , Michèle

2017-01-01

International audience; This paper addresses a collaborative retrieval problem , the recommendation of job ads to applicants. Specifically, two proprietary databases are considered. The first one focuses on the context of unskilled low-paid jobs/applicants; the second one focuses on highly qualified jobs/applicants. Each database includes the job ads and applicant resumes together with the collaborative filtering data recording the applicant clicks on job ads. The proposed approach, called LA...

THE DIFFERENCE BETWEEN DEVELOPING SINGLE PAGE APPLICATION AND TRADITIONAL WEB APPLICATION BASED ON MECHATRONICS ROBOT LABORATORY ONAFT APPLICATION

Directory of Open Access Journals (Sweden)

V. Solovei

2018-04-01

Full Text Available Today most of desktop and mobile applications have analogues in the form of web-based applications.  With evolution of development technologies and web technologies web application increased in functionality to desktop applications. The Web application consists of two parts of the client part and the server part. The client part is responsible for providing the user with visual information through the browser. The server part is responsible for processing and storing data.MPA appeared simultaneously with the Internet. Multiple-page applications work in a "traditional" way. Every change eg. display the data or submit data back to the server. With the advent of AJAX, MPA learned to load not the whole page, but only a part of it, which eventually led to the appearance of the SPA. SPA is the principle of development when only one page is transferred to the client part, and the content is downloaded only to a certain part of the page, without rebooting it, which allows to speed up the application and simplify the user experience of using the application to the level of desktop applications.Based on the SPA, the Mechatronics Robot Laboratory ONAFT application was designed to automate the management process. The application implements the client-server architecture. The server part consists of a RESTful API, which allows you to get unified access to the application functionality, and a database for storing information. Since the client part is a spa, this allows you to reduce the load on the connection to the server and improve the user experience

NAL-Tokyo Institute of Technology: Oxygen concentration on the surface of the solid, C[sub 6]0 are used, and it succeeds in the measurement. Kotai hyomen no sanso nodo, C[sub 60] mochii sokuteini seiko

Energy Technology Data Exchange (ETDEWEB)

1998-12-31

NAL succeeded in oxygen concentration measurement on the surface of the solid which fralen (C[sub 6]0) which was the same base body in cooperation with Tokyo Institute of Technology, biotechnology course as to carbon was used for fralen absorbs light, and materiality to be returned in the condition (base bottom condition) of the place by this activated condition's reacting for the activated condition with oxygen is used. The condition that became of this fralen was used, and oxygen pressure (concentration) developed how to measure it. Oxygen pressure on the surface of the irradiation is measured the light with applying fralen on the surface of the measurement solid and spraying oxygen gas on the application side. So far, 100 points and more of holes were made on the surface of the model, and a pressure sensor was installed, and pressure measurement was being done, and it was as it were the measurement of the meeting body of the point in the aircraft and the wind experiment of the rocket model. The application of fralen, light only irradiates it, and oxygen pressure can be measured easily in the way of measuring it this time. Moreover, it is the measurement of the non-contact and non-destruction side. The illuminant, which makes fralen activated condition again, is sufficient with the visible light, and it is said that it doesn't need to use purple outside light about it. If light can irradiate it again, the surface pressure of which part can be measured, too. (translated by NEDO)

NAL-Tokyo Institute of Technology: Oxygen concentration on the surface of the solid, C{sub 6}0 are used, and it succeeds in the measurement; Kotai hyomen no sanso nodo, C{sub 60} mochii sokuteini seiko

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

NAL succeeded in oxygen concentration measurement on the surface of the solid which fralen (C{sub 6}0) which was the same base body in cooperation with Tokyo Institute of Technology, biotechnology course as to carbon was used for fralen absorbs light, and materiality to be returned in the condition (base bottom condition) of the place by this activated condition`s reacting for the activated condition with oxygen is used. The condition that became of this fralen was used, and oxygen pressure (concentration) developed how to measure it. Oxygen pressure on the surface of the irradiation is measured the light with applying fralen on the surface of the measurement solid and spraying oxygen gas on the application side. So far, 100 points and more of holes were made on the surface of the model, and a pressure sensor was installed, and pressure measurement was being done, and it was as it were the measurement of the meeting body of the point in the aircraft and the wind experiment of the rocket model. The application of fralen, light only irradiates it, and oxygen pressure can be measured easily in the way of measuring it this time. Moreover, it is the measurement of the non-contact and non-destruction side. The illuminant, which makes fralen activated condition again, is sufficient with the visible light, and it is said that it doesn`t need to use purple outside light about it. If light can irradiate it again, the surface pressure of which part can be measured, too. (translated by NEDO)

29 CFR 2704.202 - Contents of application-where the applicant has prevailed.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Contents of application-where the applicant has prevailed... Information Required From Applicants § 2704.202 Contents of application—where the applicant has prevailed. (a) An application for an award under § 2704.105(a) shall show that the applicant has prevailed in a...

Java Application Shell: A Framework for Piecing Together Java Applications

Science.gov (United States)

Miller, Philip; Powers, Edward I. (Technical Monitor)

2001-01-01

This session describes the architecture of Java Application Shell (JAS), a Swing-based framework for developing interactive Java applications. Java Application Shell is being developed by Commerce One, Inc. for NASA Goddard Space Flight Center Code 588. The purpose of JAS is to provide a framework for the development of Java applications, providing features that enable the development process to be more efficient, consistent and flexible. Fundamentally, JAS is based upon an architecture where an application is considered a collection of 'plugins'. In turn, a plug-in is a collection of Swing actions defined using XML and packaged in a jar file. Plug-ins may be local to the host platform or remotely-accessible through HTTP. Local and remote plugins are automatically discovered by JAS upon application startup; plugins may also be loaded dynamically without having to re-start the application. Using Extensible Markup Language (XML) to define actions, as opposed to hardcoding them in application logic, allows easier customization of application-specific operations by separating application logic from presentation. Through XML, a developer defines an action that may appear on any number of menus, toolbars, and buttons. Actions maintain and propagate enable/disable states and specify icons, tool-tips, titles, etc. Furthermore, JAS allows actions to be implemented using various scripting languages through the use of IBM's Bean Scripting Framework. Scripted action implementation is seamless to the end-user. In addition to action implementation, scripts may be used for application and unit-level testing. In the case of application-level testing, JAS has hooks to assist a script in simulating end-user input. JAS also provides property and user preference management, JavaHelp, Undo/Redo, Multi-Document Interface, Single-Document Interface, printing, and logging. Finally, Jini technology has also been included into the framework by means of a Jini services browser and the

Creation of web applications by Rich Internet Application Adobe Flex

OpenAIRE

PEKA, Karel

2011-01-01

Bachelor work focuses on explaining the functions and development of interactive applications in Adobe Flex RIA also compared to similar web technologies such as AJAX, Microsoft Silverlight or Adobe Flash. Explain the difference between "ordinary" sites and Rich Internet Application (RIA) and the difference shows a series of demonstration examples were processed in Adobe Flash Builder (environment for building Flex applications). Also will be created large-scale application for comprehensive ...

Engineering applications using CAD based application programming interface

Directory of Open Access Journals (Sweden)

Tzotzis Anastasios

2017-01-01

Full Text Available Automating the design process of a product or a system can provide engineers and designers with many benefits. As such, repeatable tasks that are time consuming can be handled automatically and with minimal human attention. This is achieved by using the API (Application Programmable Interface of CAD systems in order to create macros or even develop software applications. The present paper deals with an application that has been developed with the API of a general purposes CAD system. This application automates the design process of a standard pneumatic double acting cylinder based on the appropriate inserted parameters (ISO 15552.The design process begins with the creation of a series of components developed as solids, and extends to the extraction of basic attributes and properties from the complete mechanical assembly. Finally, the assembled models and the extracted data can be used to further study the design of the pneumatic double acting cylinder. It is expected in the future to expand the features of the presented application in order to automate the design process of other related mechanical systems.

PSA applications

International Nuclear Information System (INIS)

Dubreuil Chambardel, A.

1996-01-01

The IAEA now defines three types of PSA applications: Validation of design and of operation procedures; optimization of plant operation; and regulatory applications. The applications of PSA are manifold: only a few are dealt with here (precursor analysis is dealt with in session 3, topic 4). For each of them, we will do the utmost to demonstrate the main difficulties encountered, EDF's viewpoint on the matter, and the points remaining to be solved. In what follows, unless explicitly stated otherwise, we have made every effort to represent the different applications as they are practiced by all concerned in the international community, and to describe the inherent difficulties the international community has encountered with these applications with all objectivity. It goes without saying that the comments below are simply those of the ESF department, and are submitted here for discussion by the experts. 13 refs

PSA applications

Energy Technology Data Exchange (ETDEWEB)

Dubreuil Chambardel, A

1997-12-31

The IAEA now defines three types of PSA applications: Validation of design and of operation procedures; optimization of plant operation; and regulatory applications. The applications of PSA are manifold: only a few are dealt with here (precursor analysis is dealt with in session 3, topic 4). For each of them, we will do the utmost to demonstrate the main difficulties encountered, EDF`s viewpoint on the matter, and the points remaining to be solved. In what follows, unless explicitly stated otherwise, we have made every effort to represent the different applications as they are practiced by all concerned in the international community, and to describe the inherent difficulties the international community has encountered with these applications with all objectivity. It goes without saying that the comments below are simply those of the ESF department, and are submitted here for discussion by the experts. 13 refs.

37 CFR 2.27 - Pending trademark application index; access to applications.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Pending trademark application... Registration § 2.27 Pending trademark application index; access to applications. (a) An index of pending... particular pending application will be permitted prior to publication under § 2.80 upon written request. (c...

LCA Applications

DEFF Research Database (Denmark)

Owsianiak, Mikołaj; Bjørn, Anders; Laurent, Alexis

2018-01-01

The chapter gives examples of applications of LCA by the central societal actors in government, industry and citizens, and discusses major motivations and challenges for the use of LCA to support science-based decision-making from their respective perspectives. We highlight applications of LCA...... environmental impacts of products and systems and support decisions around production and consumption and highlights factors that prevent its even more widespread application....

Increased Productivity for Emerging Grid Applications the Application Support System

CERN Document Server

Maier, Andrew; Mendez Lorenzo, Patricia; Moscicki, Jakub; Lamanna, Massimo; Muraru, Adrian

2008-01-01

Recently a growing number of various applications have been quickly and successfully enabled on the Grid by the CERN Grid application support team. This allowed the applications to achieve and publish large-scale results in a short time which otherwise would not be possible. We present the general infrastructure, support procedures and tools that have been developed. We discuss the general patterns observed in supporting new applications and porting them to the EGEE environment. The CERN Grid application support team has been working with the following real-life applications: medical and particle physics simulation (Geant4, Garfield), satellite imaging and geographic information for humanitarian relief operations (UNOSAT), telecommunications (ITU), theoretical physics (Lattice QCD, Feynman-loop evaluation), Bio-informatics (Avian Flu Data Challenge), commercial imaging processing and classification (Imense Ltd.) and physics experiments (ATLAS, LHCb, HARP). Using the EGEE Grid we created a standard infrastruct...

Medical Applications

OpenAIRE

Biscari, C.; Falbo, L.

2016-01-01

The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on ...

ADAM (Affordable Desktop Application Manager): a Unix desktop application manager

International Nuclear Information System (INIS)

Liebana, M.; Marquina, M.; Ramos, R.

1996-01-01

ADAM stands for Affordable Desktop Application Manager. It is a GUI developed at CERN with the aim to ease access to applications. The motivation to develop ADAM came from the unavailability of environments like COSE/CDE and their heavy resource consumption. ADAM has proven to be user friendly: new users are able to customize it to their needs in few minutes. Groups of users may share through ADAM a common application environment. ADAM also integrates the Unix and the PC world. PC users can excess Unix applications in the same way as their usual Windows applications. This paper describes all the ADAM features, how they are used at CERN Public Services, and the future plans for ADAM. (author)

Applications of radionuclides in industry; Applications des radioelements a l'industrie

Energy Technology Data Exchange (ETDEWEB)

Leveque, P [Commissariat a l' Energie Atomique, Paris (France). Centre d' Etudes Nucleaires

1955-07-01

After a brief recall of a few concepts (mass number, charge and beams properties) and the description of used detectors (ionization chamber, Geiger-Mueller counter, scintillation counters), some radionuclides applications are described. In a first part, the well-developed applications are presented in three distinct groups: continuous applications such as {beta} and {gamma} gauges (determination hydrogen content of an hydrocarbon and content of an emulsion; discharge of static electricity), discontinuous applications such as radiography and autoradiography, wear or manufacture problems (distribution of a fungicide on tobacco) and finally, applications in research laboratories such as diffusion, exchange and solubility. It also describes the applications which are still in development such as the action of beams on matter (reticulation and degradation of polymers, monomers polymerisation, cold sterilization). In conclusion, few advices on the opportunity of such applications and the choice of the radionuclides are given. (M.P.)

Pulse polarography - special application; Polarographie a impulsions - applications particulieres

Energy Technology Data Exchange (ETDEWEB)

Chapron, Y [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1967-07-01

The calculation of the current on a plane electrode in particular conditions is presented briefly, the first part of the report then consists of a theoretical and methodological presentation of pulse polarography. The calculation of the current in pulse polarography is given for different modes of measurement and for redox systems of variable reversibility. Various extensions are proposed with a view to extending the field of application of the method. The second part presents two particular applications. One application is to analytical chemistry: organometallic complexes applied to the pulse polarographic analysis; the other application is to electrochemical kinetics using integral pulse polarography. This research has enabled us to determine, in the first case, elements present in minute traces, and in the second case the kinetic parameters of an electrochemical reaction which is too fast to be analyzed by conventional polarography. (author) [French] Apres un rappel sur le calcul du courant sur electrode plane dans des conditions precises, la premiere partie du memoire est consacree a l'expose theorique et methodologique de la polarographie a impulsions. Le calcul du courant en polarographie a impulsions est donne pour divers modes de mesures et pour des systemes redox de reversibilites variees. Diverses extensions sont proposees de facon a elargir le domaine d'application de la methode. La deuxieme partie introduit deux applications particulieres. Une application a la chimie analytique: les complexes organometalliques appliques a l'analyse pulsopolarographique et une application a la cinetique electrochimique par polarographie a impulsions integrale. Ces recherches nous ont permis de determiner dans le premier cas, des elements a l'etat de traces infimes, dans le deuxieme cas, les parametres cinetiques d'une reaction electrochimique trop rapide pour etre analysee par polarographie classique. (auteur)

Web Application Vulnerabilities

OpenAIRE

Yadav, Bhanu

2014-01-01

Web application security has been a major issue in information technology since the evolvement of dynamic web application. The main objective of this project was to carry out a detailed study on the top three web application vulnerabilities such as injection, cross site scripting, broken authentication and session management, present the situation where an application can be vulnerable to these web threats and finally provide preventative measures against them. ...

Application and interview features used to assess applicant qualifications for residency training.

Science.gov (United States)

Butts, Allison R; Smith, Kelly M

2015-02-01

To determine what factors residency program directors (RPDs) consider and what methods they use to assess applicants. Respondents ranked the importance of 27 applicant features within domains: academics/credentials, application features/program fit, involvement, professional experience, research/ teaching experience, and postgraduate year 1 (PGY-1) residency experience. Rank was assigned in an ordinal fashion (1 = most important feature). The domains were characterized by their importance (mean % ± SD) in selecting candidates for interviews. Participants characterized their screening process according to 8 application and 6 interview features and the corresponding applicant dimensions evaluated. RPDs rated the importance of 14 methods applicants used to communicate with the program and 3 methods by which references were obtained. A Likert scale was used for rating (4 = crucial features). The approaches the program used to evaluate 12 application features or interpersonal interactions were reported. The most important application domain was application features/program fit (26.28 ± 19.11). The highest ranked application feature was program fit (2.04 ± 1.17). The applicant's cover letter, recommendation letters, curriculum vitae, and interview meal were commonly used to assess communication and interpersonal skills, knowledge base, and experience. The most important communication venue was the on-site interview (3.95 ± 0.23). Recommendations solicited by RPDs (3.42 ± 0.69) were most important. Programs formally evaluated the interview (89%) and recommendation letters (84%). Understanding the importance that RPDs place on application and interview features, as well as the process used to assess communication skills and interpersonal interactions, should allow residency candidates to become more competitive residency prospects.

Wind tunnel investigation of an STOL aircraft model. STOL zenki mokei-fudo shiken. ; Engine nacelle keijo koka

Energy Technology Data Exchange (ETDEWEB)

1993-01-01

The nacelle shape of a mimic engine mounted on the wind tunnel test model for an STOL aircraft developed by the National Aerospace Laboratory has much larger length than in the nacelle of a scale reduced to 8% of an actual engine, and the shape below the nacelle is different. Therefore, in order to estimate the air force in the actual aircraft from the aerodynamic data obtained in a wind tunnel test, the data are corrected by using differences in aerodynamic loads (estimated values) applied on the mimic engine and the actual engine. For the purpose of discussing the reasonability of this correction, an 8%-scale flow through nacelle with the same shape as in the actual aircraft (the actual aircraft type) and a flow through nacelle for a wind tunnel testing model of the experimental STOL aircraft were fabricated and wind tunnel tests were performed. These results were compared with the corrected results of the mimic engine wind tunnel test. As a result, it was made clear that the force data have been corrected excessively, and the moments have been corrected considerably well. 7 refs., 32 figs., 7 tabs.

Equalizing effect of the fluctuation in areal irradiance; Chiikinai ni okeru shugo nissha no hendo yokusei koka

Energy Technology Data Exchange (ETDEWEB)

Minowa, J; Kurokawa, K [Tokyo University of Agriculture and Technology, Tokyo (Japan); Otani, K; Tsuda, I; Sakuta, K [Electrotechnical Laboratory, Tsukuba (Japan)

1997-11-25

Aggravation in electric power quality is concerned because of irregular output power caused by a large number of photovoltaic power generation systems connected with the power grids. However, averaging of the irregularity may be expected in a wide area due to time-based shift in cloud movements. In order to identify this effect, insolation data were measured in terms of planes at multiple points in the city of Tsukuba to discuss the fluctuation equalizing effect. The system is composed of nine instruments to measure insolation plane characteristics, nine terminal station units, and a base station unit. The insolation data express the horizontal plane insolation intensity at a sampling interval of one minute. Insolation fluctuation (standard deviation of insolation fluctuation components) was defined as an index of the insolation fluctuation. Based on the index, an averaging effect when the photovoltaic systems are installed in a number of locations was considered by using statistic estimation. As a result, the averaging effect was obtained even in an area with a radius of several kilometers. In addition, the measurement data revealed that there is an upper limit in the effect depending on the number of system installation. It was also made clear that the data are affected by distances to connect the photovoltaic power generation systems with each other and by climatic conditions. 3 refs., 6 figs.

Trends for reduction of greenhouse gases (GHG) in Japan; Kokunai no onshitsu koka gas sakugen doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The purpose of this research is to identify the problems and measures for reduction of GHG emissions by conducting research on the GHG emission trends in the energy-conversion, industry, public and transportation sectors, and policies and regulations. Japan`s total emission of CO2 in FY 1994 was 343 million tons in terms of carbon, and the emission per capita was 2.74 tons. These amounts were 7% increase in total CO2 emissions and 6% increase in the emission per capita compared with those in FY 1990. There were high increases in the public and transportation sectors. This trend is expected to continue in the future. Since more than 90% of CO2 emission is derived from energy origin, the climate change problems mean energy and economic problems. To attain Japan`s goal of the year 2000 with maintaining the appropriate economic growth, it is crucial to accelerate energy-efficiency and introduction of new energy. 19 figs., 28 tabs.

Complex of fiber and effects of mix spinning; Sen'i no fukugoka to konbo no koka

Energy Technology Data Exchange (ETDEWEB)

Matsui, N. [Asahi Chemical Industry Corp., Tokyo (Japan)

2000-03-01

In recently, comfortable life can be spent by performing complex of fibers. As complex of single fibers being materials of yarn, conjugate fiber is listed. Conjugate fiber is a fiber spun over 2 kind of polymer having different characteristics from one nozzle. There are sheath core type fibers as complex functional fibers. Static electricity prevention fibers can be prepared by putting conductive materials, for example, carbon black into core parts. After putting components being able to dissolve by specific solvents into core, hollow fibers can be prepared by dissolving core parts in near process to products. By reason of clothing contacting to skin directly in board aria and long time, fashionable characters of design and so on or comfortability of wearing are needed in many cases. In this reason, many kinds of fibers for clothing prepared complex yarn by being complex and by making the best use of good characteristics of each fibers, and developed a way to new function or new use. (NEDO)

Hyperthermia and massage are effect for the gingivitis improvement; Onnetsu to massaji ga shinikuen kaizen ni koka

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-10-01

It was confirmed that Kao and research group of Nosaka professor of Iwate Medical Univ. faculty of dentistry that hyperthermia and massage at the 40 degrees C for the gingival activate the gingival lymph duct function and that it improves the gingivitis was effective. By causing the microcirculation disorder of the gingival, the research of the vascularisation is main until now for the gingivitis. Present research demonstrated that the recovery of the lymph duct function was effective for the gingivitis improvement for the first time in the world. (translated by NEDO)

Smoke reduction using multiple stage diesel combustion; Nidan nensho ni yoru diesel kikan no smoke teigen koka

Energy Technology Data Exchange (ETDEWEB)

Tsujimura, K. [Chiba Institute of Technology, Chiba (Japan); Hashizume, T.; Miyamoto, T.; Akagawa, H.

1999-09-25

A new diesel combustion concept termed MULDIC (MULtiple stage Diesel Combustion), which can reduce NO{sub x} emissions at high load conditions, was studied by means of engine test, combustion observation and numerical simulation. The engine test showed that simultaneous reduction of NO{sub x} and smoke could be obtained with MULDIC operation. In-cylinder combustion observation was carried out in order to clarify the cause of the smoke reduction of the MULDIC. In these photographs, a first stage combustion sins observed with nonluminous flame. In a second stage combustion, a highly sooting luminous flame was observed because the ignition delay was short. However this luminous flame disappeared quickly. Computational results showed that, oxygen is distributed evenly in the cylinder in later portion of the second stage combustion. Moreover, since cylinder temperature was very high, most of the soot oxidized rapidly. Thus, low smoke combustion was obtained. (author)

Study of evaluation for grouting effect in a borehole; Yakueki chunyu koka hyoka gijutsu ni okeru ichikosatsu

Energy Technology Data Exchange (ETDEWEB)

Nakamura, H; Matsuo, T [Fukuoka Municipal Transportation Bureau, Fukuoka (Japan); Yamauchi, Y; Imanishi, H [Osaka Soil Test, Osaka (Japan)

1996-10-01

For the foundation improvement works by grouting in a borehole, evaluation of grouting effect is one of the most important management items. The grouting design and works are sometimes reconsidered depending on the evaluation of grouting effect during the test injection. The purpose of the evaluation of grouting effect is to grasp the range of improvement and consolidation after the injection, and to judge and estimate the strength and permeability of the consolidation part. This paper describes the judgment method of the strength using PS logging results and borehole televiewer (BHTV) logging results. The reflection intensity (Ir) by the BHTV logging increased after the grouting, which showed a same tendency as that using S-wave and P-wave velocities (Vs and Vp) before and after the grouting. This was considered to demonstrate the grouting effect. A relation was obtained between the Vs, Vp and Ir before and after the grouting, which was expressed by following equation. Ir=0.143{times}Vs-70=0.093{times}Vp-110. The relation with the dynamic elastic coefficient (Ed) was also obtained as follow; Ir=0.0013{times}Ed. 9 figs.

Applications for cyber security - System and application monitoring

International Nuclear Information System (INIS)

Marron, J. E.

2006-01-01

Standard network security measures are adequate for defense against external attacks. However, many experts agree that the greater threat is from internal sources. Insiders with malicious intentions can change controller instructions, change alarm thresholds, and issue commands to equipment which can damage equipment and compromise control system integrity. In addition to strict physical security the state of the system must be continually monitored. System and application monitoring goes beyond the capabilities of network security appliances. It will include active processes, operating system services, files, network adapters and IP addresses. The generation of alarms is a crucial feature of system and application monitoring. The alarms should be integrated to avoid the burden on operators of checking multiple locations for security violations. Tools for system and application monitoring include commercial software, free software, and ad-hoc tools that can be easily created. System and application monitoring is part of a 'defense-in-depth' approach to a control network security plan. Layered security measures prevent an individual security measure failure from being exploited into a successful security breach. Alarming of individual failures is essential for rapid isolation and correction of single failures. System and application monitoring is the innermost layer of this defense strategy. (authors)

Connected vehicle applications : environment.

Science.gov (United States)

2016-01-01

The U.S. Department of Transportation has developed a number of connected vehicle environmental applications, including the Applications for the Environment Real-Time Information Synthesis (AERIS) research program applications and road weather applic...

IMS Application Developer's Handbook Creating and Deploying Innovative IMS Applications

CERN Document Server

Noldus, Rogier; Mulligan, Catherine; Fikouras, Ioannis; Ryde, Anders; Stille, Mats

2011-01-01

IMS Application Developer Handbook will give a hands-on view of exactly what needs to be done by IMS application developers to write an application and take it "live" on an operator's network. It will offer practical guidance on building innovative applications using the features and capabilities of the IMS network, show how the rapidly changing development environment is impacting on the business models employed in the industry and how existing network solutions can be moved towards IMS. The book will also elaborate on how IMS applies basic VoIP principles and techniques to realise a true mul

Medical Applications

CERN Document Server

Biscari, C.

2014-12-19

The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on CNAO, and the report closes with a brief outlook on the future of this field.

Medical Applications

International Nuclear Information System (INIS)

Biscari, C; Falbo, L

2014-01-01

The use of accelerators for medical applications has evolved from initial experimentation to turn-key devices commonly operating in hospitals. New applications are continuously being developed around the world, and the hadrontherapy facilities of the newest generation are placed at the frontier between industrial production and advanced R&D. An introduction to the different medical application accelerators is followed by a description of the hadrontherapy facilities, with special emphasis on CNAO, and the report closes with a brief outlook on the future of this field

Electrical applications 2

CERN Document Server

Tyler, David W

1998-01-01

Electrical Applications 2 covers the BTEC NII level objectives in Electrical Applications U86/330. To understand the applications, a knowledge of the underlying principles is needed and these are covered briefly in the text. Key topics discussed are: the transmission and distribution of electrical energy; safety and regulations; tariffs and power factor correction; materials and their applications in the electrical industry; transformers; DC machines; illumination; and fuse protection. Included in each chapter are worked examples which should be carefully worked through before progressing to t

Road drainage system using highly compressible and long-term permeable geotextile. Evaluation of long-term permeability and application to trafficability in a tunnel; Kotaiatsu mezumari taikyugata geotextile haisuizai wo mochiita roban haisui taisaku. Mezumari taikyusei no hyoka to tunnel konai kasetsu doro no trafficability kaizen koka

Energy Technology Data Exchange (ETDEWEB)

Takahashi, S.; Yamagishi, K.; Hirama, K.; Ueno, T. [Obayashi Corp., Tokyo (Japan)

1998-07-10

A geotextile drainage material called ART-DRAIN has been developed. It was applied to temporary roads in a tunnel, to evaluate its permeability through a long-term permeability test using a model. The ART-DRAIN is a drainage material for protecting the roads from muddy conditions in a tunnel due to spring water. A filter for permeating fine soil particles was employed to keep the permeability. From the long-term permeability test using a model, appropriate permeability of ART-DRAIN was maintained for three years without blinding. There was only a slight inflow of fine grain soils into the ART-DRAIN. It was confirmed that the permeability was not obstructed by the fine grain soils. The ART-DRAIN was applied to tunnel construction works for the high-speed railway in Kyoto and the national road in mountains. From these applications, factors for enhancing the permeability effect were confirmed, which includes the selection of high quality muck, insurance of the road-bed strength by the initial compaction, use of road drainage materials with high compressible property and permeability of filter, and intervals of drainage. 1 ref., 19 figs., 1 tab.

Hardening Azure applications

CERN Document Server

Gaurav, Suraj

2015-01-01

Learn what it takes to build large scale, mission critical applications -hardened applications- on the Azure cloud platform. This 208 page book covers the techniques and engineering principles that every architect and developer needs to know to harden their Azure/.NET applications to ensure maximum reliability and high availability when deployed at scale. While the techniques are implemented in .NET and optimized for Azure, the principles here will also be valuable for users of other cloud-based development platforms. Applications come in a variety of forms, from simple apps that can be bui

Criteria for Social Applications

DEFF Research Database (Denmark)

Atzenbeck, Claus; Tzagarakis, Manolis

2007-01-01

Social networks are becoming increasingly important for a wide number of applications. This is in particular true in the context of the Web 2.0 movement where a number of Web-based applications emerged - termed social networking applications or services - that allow the articulation of social...... relationships between individuals thus creating social networks. Although Web 2.0 applications are a popular and characteristic class of such applications they are not the only representatives that permit such functionality. Applications in the Personal Information Management domain exhibit similar...... characteristics but have never been mentioned in the context of social networking. The increasing number and diversity of such applications makes their study, analysis and evaluation from a systems point of view critical and important as their study may help identify relationships that are useful when attempting...

User Types in Online Applications

Directory of Open Access Journals (Sweden)

Ion IVAN

2011-08-01

Full Text Available Online applications are presented in the context of information society. Online applications characteristics are analyzed. Quality characteristics are presented in relation to online applications users. Types of users for AVIO application are presented. Use cases for AVIO application are identified. The limitations of AVIO application are defined. Types of users in online applications are identified. The threedimensional matrix of access to the online application resources is built. The user type-oriented database is structured. Access management of the fields related to the database tables is analyzed. The classification of online applications users is done.

Microwave power engineering applications

CERN Document Server

Okress, Ernest C

2013-01-01

Microwave Power Engineering, Volume 2: Applications introduces the electronics technology of microwave power and its applications. This technology emphasizes microwave electronics for direct power utilization and transmission purposes. This volume presents the accomplishments with respect to components, systems, and applications and their prevailing limitations in the light of knowledge of the microwave power technology. The applications discussed include the microwave heating and other processes of materials, which utilize the magnetron predominantly. Other applications include microwave ioni

Wapice News Mobile Application

OpenAIRE

Söylemez, Ilke

2017-01-01

Since the mobile phones started to have an increasingly significant role in daily life, the mobile application development also started to be an important area in the software industry. The problem for mobile application developers is to develop a mobile application which supports all the devices and platforms on the market. This issue created a need for cross platform mobile applications. The cross platform mobile development refers to the development of mobile applications that could be use...

Sight Application Analysis Tool

Energy Technology Data Exchange (ETDEWEB)

Bronevetsky, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2014-09-17

The scale and complexity of scientific applications makes it very difficult to optimize, debug and extend them to support new capabilities. We have developed a tool that supports developers’ efforts to understand the logical flow of their applications and interactions between application components and hardware in a way that scales with application complexity and parallelism.

SIMS applications workshop. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

The first ANSTO/AINSE SIMS Workshop drew together a mixture of Surface Analysis experts and Surface Analysis users with the concept that SIMS analysis has to be enfolded within the spectrum of surface analysis techniques and that the user should select the technique most applicable to the problem. With this concept in mind the program was structured as sessions on SIMS Facilities; Applications to Mineral Surfaces; Applications to Biological Systems, Applications to Surfaces as Semi- conductors, Catalysts and Surface Coatings; and Applications to Ceramics

Development of hydriding alloys with multi-functionally-graded properties and their applications to energy conversion devices; Keishagata fukugo kino wo hyomen ni motsu suiso kyuzo gokin no kaihatsu to energy henkan gijutsu eno oyo

Energy Technology Data Exchange (ETDEWEB)

Suda, S; Kadoma, H; Nagamoto, H; Okura, T [Kogakuin University, Tokyo (Japan)

1997-02-01

This paper describes the formation of fluoride layer on the surface of hydriding alloys. The fluoride formation reaction consists of a reduction removal process of surface oxide and a fluorination process. Specific surface area of alloy grains can be increased by the hydrogenation reaction in the surface layer accompanied with the removal of surface oxide, which results in easier permeation of molecular hydrogen into fluoride layer. During the fluorination process, a large amount of Ni in the alloy components is eluted, which results in the reduction of Ni distribution immediately under the fluoride layer in the alloy. Consequently, collector sites near the surface are reduced, and conductivity among alloy grains is degraded. To enhance the hydrogen collector sites, specific surface area of alloy grains can be increased by controlling the pH value of fluorination treatment solution in a given range. Moreover, performance of fluoride layer can be advanced by electrochemically dispersing metal Ni in the fluoride layer using Ni complex ion mixed in the treatment solution. 2 refs., 3 figs.

Development and Application of Microfabricated Chemical Gas Sensors For Aerospace Applications

Science.gov (United States)

Hunter, G. W.; Neudeck, P. G.; Fralick, G.; Thomas, V.; Liu, C. C.; Wu, Q. H.; Sawayda, M. S.; Jin, A.; Hammond, J.; Makel, D.;

Application Portable Parallel Library

Science.gov (United States)

Cole, Gary L.; Blech, Richard A.; Quealy, Angela; Townsend, Scott

1995-01-01

Application Portable Parallel Library (APPL) computer program is subroutine-based message-passing software library intended to provide consistent interface to variety of multiprocessor computers on market today. Minimizes effort needed to move application program from one computer to another. User develops application program once and then easily moves application program from parallel computer on which created to another parallel computer. ("Parallel computer" also include heterogeneous collection of networked computers). Written in C language with one FORTRAN 77 subroutine for UNIX-based computers and callable from application programs written in C language or FORTRAN 77.

A novel system for commissioning brachytherapy applicators: example of a ring applicator

Science.gov (United States)

Fonseca, Gabriel P.; Van den Bosch, Michiel R.; Voncken, Robert; Podesta, Mark; Verhaegen, Frank

2017-11-01

A novel system was developed to improve commissioning and quality assurance of brachytherapy applicators used in high dose rate (HDR). It employs an imaging panel to create reference images and to measure dwell times and dwell positions. As an example: two ring applicators of the same model were evaluated. An applicator was placed on the surface of an imaging panel and a HDR 192Ir source was positioned in an imaging channel above the panel to generate an image of the applicator, using the gamma photons of the brachytherapy source. The applicator projection image was overlaid with the images acquired by capturing the gamma photons emitted by the source dwelling inside the applicator. We verified 0.1, 0.2, 0.5 and 1.0 cm interdwell distances for different offsets, applicator inclinations and transfer tube curvatures. The data analysis was performed using in-house developed software capable of processing the data in real time, defining catheters and creating movies recording the irradiation procedure. One applicator showed up to 0.3 cm difference from the expected position for a specific dwell position. The problem appeared intermittently. The standard deviations of the remaining dwell positions (40 measurements) were less than 0.05 cm. The second ring applicator had a similar reproducibility with absolute coordinate differences from expected values ranging from  -0.10 up to 0.18 cm. The curvature of the transfer tube can lead to differences larger than 0.1 cm whilst the inclination of the applicator showed a negligible effect. The proposed method allows the verification of all steps of the irradiation, providing accurate information about dwell positions and dwell times. It allows the verification of small interdwell positions (⩽0.1 cm) and reduces measurement time. In addition, no additional radiation source is necessary since the HDR 192Ir source is used to generate an image of the applicator.

Learning Android application testing

CERN Document Server

Blundell, Paul

2015-01-01

If you are an Android developer looking to test your applications or optimize your application development process, then this book is for you. No previous experience in application testing is required.

E-recruitment: a study into applicant perceptions of an online application system

NARCIS (Netherlands)

Sylva, H.; Mol, S.T.

2009-01-01

Little is known about applicant reactions to web-based recruitment and selection procedures. This study examines applicant perceptions of web-based procedures, based on a field study among 1360 applicants to a multinational financial services organization applying for jobs in the United Kingdom, the

77 FR 26507 - Application(s) for Duty-Free Entry of Scientific Instruments

Science.gov (United States)

2012-05-04

... States. Application accepted by Commissioner of Customs: March 29, 2012. Docket Number: 12-018. Applicant... general category manufactured in the United States. Application accepted by Commissioner of Customs: March...: The instrument will be used to investigate the genes and proteins that underlie normal and pathologic...

Galileo Timing Applications

Science.gov (United States)

2007-11-01

public bodies like university and research institutes. The user community analysis also includes a market analysis performed by a specialized company to... companies and public institutions (e.g., universities, research laboratories) that work in several different application domains in order to virtually...Summary of application domains for the use of time in cryptography. B2G B2B B2C Applications Military waypoints, judicial reports, construction

Promise Zones for Applicants

Data.gov (United States)

Department of Housing and Urban Development — This tool assists applicants to HUD's Promise Zone initiative prepare data to submit with their application by allowing applicants to draw the exact location of the...

Developing iPhone application

OpenAIRE

Nebo, Charles

2015-01-01

IPhone application popularity and demand are continuously on the increase since 2008 when Apple launched iPhone. Consequently, many applications are built targeting different user needs. But developing iPhone applications do have challenges. This research study explores current development study for developing iPhone application where the development environment and technologies are problematic. This paper intends to review some software development methodologies, methods, and techniques for ...

49 CFR 365.503 - Application.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Application. 365.503 Section 365.503... APPLICATIONS FOR OPERATING AUTHORITY Special Rules for Certain Mexico-domiciled Carriers § 365.503 Application. (a) Each applicant applying under this subpart must submit an application that consists of: (1) Form...

Hydrophobization og the surface fo malachite with some fluorosurfactants. 2,3 no fussokei kaimen kasseizai ni yoru malachite hyomen no sosuika

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, M [National Reserach Institute for Pollution and Resources, Tsukuba (Japan); Wakamatsu, T [Kyoto University, Kyoko (Japan). Faculty of Engineering

1991-10-18

The depleting trends of high-grade ores in recent years make it unavoidable to float ores in fine powder forms. To achieve this, research and development is important on such a recovering agent that can hydrophobize the surfaces of useful ores selectively and powerfully. This paper describes the discussion on three kinds of fluorosurfactant, namely perfluorooctanoic acid, Ftergent-100 and Ftergent-150, whic were used to hydrophobize the surface of malachite, and compared of its utilization possibility as a recovery agent with other surfactants. As a result, it was found that the Ftergent-100, which contains five CF{sub 3}{sup {minus}} in one molecule having extremely low critical surface tension, and the Ftergent-150 can hydrophobize sufficiently the malachite surface and provide good deposition. The region providing good deposition was at a weak-acidic to weak-alkali region in the case of the Ftergent-150. Therefore, both materials are thought they could be used as a recovering agent. 8 refs., 10 figs., 3 tabs.

Effect of PV module output power on module temperature; Taiyo denchi no shutsuryoku henka ga module hyomen ondo ni oyobosu eikyo

Energy Technology Data Exchange (ETDEWEB)

Hongo, T; Kitamura, A [Kansai Electric Power Co. Inc., Osaka (Japan); Igaki, K; Mizumoto, T [Kanden Kako Co. Inc., Osaka (Japan)

1996-10-27

Effect of the photovoltaic (PV) module output power variation on the module surface temperature has been investigated by field measurements. PV modules with capacity of 54 W were used for the temperature measurements. Three 2 kW-class PV systems were operated. T-type thermocouples were used for measuring temperatures. Measurement time intervals were 15 minutes, 30 minutes, 60 minutes, and 24 hours. Measurement period was between May 25, 1995 and June 25, 1996. The surface temperature increased during non-loaded PV output, and decreased during load-carrying PV output. Difference of the surface temperature between non-loaded PV output and load-carrying PV output was 3.5{degree}C at maximum through a year. The surface temperature was saturated within 30 minutes. When PV output was changed in 30 or 60 minutes interval, the variation of surface temperature was distinctly observed. When PV output was changed in 15 minutes interval, it was not observed distinctly. There was no difference of the surface temperatures during the time zones with less solar radiation, such as in the morning and evening, and at night. Except these time zones, difference of the surface temperatures was 3.5{degree}C at maximum. 4 figs.

Android Applications Security

OpenAIRE

Paul POCATILU

2011-01-01

The use of smartphones worldwide is growing very fast and also the malicious attacks have increased. The mobile security applications development keeps the pace with this trend. The paper presents the vulnerabilities of mobile applications. The Android applications and devices are analyzed through the security perspective. The usage of restricted API is also presented. The paper also focuses on how users can prevent these malicious attacks and propose some prevention measures, including the a...

Application Layer Multicast

Science.gov (United States)

Allani, Mouna; Garbinato, Benoît; Pedone, Fernando

An increasing number of Peer-to-Peer (P2P) Internet applications rely today on data dissemination as their cornerstone, e.g., audio or video streaming, multi-party games. These applications typically depend on some support for multicast communication, where peers interested in a given data stream can join a corresponding multicast group. As a consequence, the efficiency, scalability, and reliability guarantees of these applications are tightly coupled with that of the underlying multicast mechanism.

Quality attributes for mobile applications

OpenAIRE

Fernandes, João M.; Ferreira, André Leite

2016-01-01

A mobile application is a type of software application developed to run on a mobile device. The chapter discusses the main characteristics of mobile devices, since they have a great impact on mobile applications. It also presents the classification of mobile applications according to two main types: native and web-based applications. Finally, this chapter identifies the most relevant types of quality attributes for mobile applications. It shows that the relevant quality attributes for mobile ...

OCT for industrial applications

Science.gov (United States)

Song, Guiju; Harding, Kevin

2012-11-01

Optical coherence tomography (OCT), as an interferometric method, has been studied as a distance ranger. As a technology capable of producing high-resolution, depth-resolved images of biological tissue, OCT had been widely used for the application of ophthalmology and has been commercialized in the market today. Enlightened by the emerging research interest in biomedical domain, the applications of OCT in industrial inspection were rejuvenated by a few groups to explore its potential for characterizing new materials, imaging or inspecting industrial parts as a service solution[3]. Benefiting from novel photonics components and devices, the industrial application of the older concepts in OCT can be re-visited with respect to the unique performance and availability. Commercial OCT developers such as Michelson Diagnostics (MDL; Orpington, U.K.) and Thorlabs (Newton, NJ) are actively exploring the application of OCT to industrial applications and they have outlined meaningful path toward the metrology application in emerging industry[3]. In this chapter, we will introduce the fundamental concepts of OCT and discuss its current and potential industrial applications.

Quantitative evaluation of ground improvement by chemical grouting using electrical resistivity. Part 3. Applicability of evaluation of improved region by resistivity tomography; Denki hiteiko ni yoru yakueki chunyu kairyo koka no teiryoteki hyoka hoho. 3. Hiteiko tomography wo riyoshita jiban kairyo han`i hyoka hoho no tekiyosei

Energy Technology Data Exchange (ETDEWEB)

Komine, H. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1996-02-01

This paper describes a method for evaluating grouting that is a means for improving the ground for excavation for building underground structures in urban areas. This is an effort for improving reliability, and evaluates the rate of filling of the water glass base chemical liquid injected for improving the ground utilizing the fact that this liquid is higher in conductivity than the soil or ground water. An experiment was conducted using a model ground so as to define the limit of applicability of this resistivity tomography by studying electrode arrangements and difference in resistivity between the grouted liquid and ground water. It was then found that the liquid-injected region is evaluated more accurately when the measuring electrodes are installed nearer to the region, that evaluation is satisfactorily accomplished when the region spans not less than 75% of the distance between the electrodes, that higher accuracy is expected when the difference in resistivity is greater between the grouted liquid and ground water, that evaluation is satisfactorily accomplished when the resistivity of the grouted liquid is not more than 10% of that of ground water, and that any grouting liquid usable for ground improvement in civil engineering in urban areas can be applied to any other grounds except where there is influence of seawater. 31 refs., 55 figs., 8 tabs.

The fusion applications study - FAME

International Nuclear Information System (INIS)

Schultz, K.R.; Engholm, B.A.; Bourque, R.F.; Cheng, E.T.; Schaffer, M.J.; Wong, C.P.C.

1986-01-01

The Fusion Applications and Market Evaluation (''FAME'') study, being conducted by GA Technologies for Lawrence Livermore National Laboratory (LLNL) and US Department of Energy, Office of Fusion Energy, (US DOE) is described. This two-year program has a FY86 objective of Evaluating Alternative Applications of Fusion, and a FY87 goal of Exploring Innovative Applications. Applications are being reviewed and categorized into Baseline, Nuclear, Chemical, Electromagnetic, and Thermal application categories. The ''traditional'' applications of electricity generation, fissile fuel and tritium production, and hydrogen production continue to look attractive. Particularly promising new applications to date, with potential for near-term markets, are isotope production and radiation processing, especially when allied with the traditional application of electricity production. The economics of separate applications as well as coproduction are discussed. The combination of electricity and /sup 60/Co production appears to be one of the most attractive

ANALYSIS AND COMPARISON OF ADOLESCENT ATHLETES' MOTIVATION: BASKETBALL PLAYERS VS. FOOTBALL PLAYERS

Directory of Open Access Journals (Sweden)

Bartolom\\u00E9 J. Almagro

2009-01-01

Full Text Available The motivation of an athlete is determinant for the athletic engagement of the adolescent. The present study attempts to analyze the motivation of adolescent basketball and football players from the perspectives of Achievement Goal Theory (Nicholls, 1989 and Self-Determination Theory (Deci & Ryan, 1985. The study's sample was composed of 248 athletes from 12 to 17 years of age. Half were from basketball and half were from football. The instruments that were utilized were: the Spanish version of the Sport Motivation Scale (SMS (Núñez, Martín-Albo, Navarro, & González, 2006, the Spanish version of the Perceived Motivational Climate in Sport Questionnaire-2 (PMSCQ-2 (Balaguer, Mayo, Atienza, & Duda, 1997, and the adapted Spanish translation (Moreno, Moreno, & Cervelló, 2007 of the Intention to be Physically Active Scale (IPAS by Hein, Müür, and Koka (2004. The comparison of the means of the variables between football and basketball players was done utilizing the student t-test for independent samples. Significant differences were found for variables such as: intrinsic motivation (IM toward accomplishment, external regulation, amotivation, task, ego, and Self-Determination Index (SDI. Basketball players obtained higher values in the SDI, in task, and in IM toward accomplishment than football players. The search for premature performance in football and coaches' educations can help to explain these differences. The importance of these differences reside in the relationship between these motivational variables and the adherence to athletic practice. In conclusion, basketball demonstrated better values in motivational variables, which demonstrates that training sessions are more oriented toward task than ego, that players have more intrinsic and self-determined motivation, and therefore, the adherence of the young athletes will be greater in this sport.

14 CFR 431.73 - Continuing accuracy of license application; application for modification of license.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Continuing accuracy of license application; application for modification of license. 431.73 Section 431.73 Aeronautics and Space COMMERCIAL SPACE... Conditions § 431.73 Continuing accuracy of license application; application for modification of license. (a...

Fundamentals and applications of neutron imaging. Application part 9. Application of neutron imaging to biological research

International Nuclear Information System (INIS)

Kawabata, Yuji

2007-01-01

For radiography, the use of neutrons as a complement to X-rays is especially suitable for biological research such as plant, wood, and medical application due to the enhanced sensitivity to light elements such as hydrogen, carbon, and nitrogen. The present paper introduces applications of neutron CT to the humidity (water) distribution and its variation in the flowering plant as cut carnation, observation of water movement in refrigerated chrysanthemum leaves using very cold neutron and in cut leaves using deuterium oxide and ordinary water, measurement of water movement in sprouting cone and soy bean and growing ginseng in the soil, and other applications as to archaeological wood immersed in a restoration solution and to medical purposes. (S. Ohno)

Applicant Satisfaction Survey

Data.gov (United States)

Office of Personnel Management — The Chief Human Capital Officers developed 3 surveys that asks applicants to assess their satisfaction with the application process on a 1-10 point scale, with 10...

E-commerce Smartphone Application

OpenAIRE

Abdullah Saleh Alqahtani; Robert Goodwin

2012-01-01

Mobile and e-commerce applications are tools for accessing the Internet and for buying products and services. These applications are constantly evolving due to the high rate of technological advances being made. This paper provides a new perspective on the types of applications that can be used. It describes and analyses device requirements, provides a literature review of important aspects of mobile devices that can use such applications and the requirements of websites designed for m-commer...

Technical applications of aerogels

International Nuclear Information System (INIS)

Hrubesh, L.W.

1997-01-01

Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels

Web application for monitoring mainframe computer, Linux operating systems and application servers

OpenAIRE

Dimnik, Tomaž

2016-01-01

This work presents the idea and the realization of web application for monitoring the operation of the mainframe computer, servers with Linux operating system and application servers. Web application is intended for administrators of these systems, as an aid to better understand the current state, load and operation of the individual components of the server systems.

Photovoltaic applications

International Nuclear Information System (INIS)

Sidrach, M.

1992-01-01

The most common terrestrial applications of photovoltaic plants are reviewed. Classification of applications can be done considering end-use sectors and load profiles (consumption demand). For those systems with direct coupling the working point is determined by the intersection of the load line with the I-V curve Design guidelines are provided for photovoltaic systems. This lecture focusses on the distribution system and safeguards

Study on solar collector utilizing electro-hydrodynamical effect; Denki ryutai rikigaku koka wo riyosuru taiyo shunetsuki no kenkyu

Energy Technology Data Exchange (ETDEWEB)

Sato, M; Aoki, H; Wako, Y [Hachinohe Institute of Technology, Aomori (Japan)

1997-11-25

This paper proposes a cone type electro-hydrodynamical (EHD) heat collector, describes its structure and principle, and mentions possibility of improving the heat collecting efficiency. The paper proposes a heat collector with a shape close to a cone. Trees are of cone form so that their every leaf, branch and truck can capture solar energy efficiently. Imitating this fact existing in the natural world, a cone-shaped heat collector was fabricated on a trial basis to discuss its heat collecting efficiency. Furthermore, black round stones are placed in the inner cone of the cone- shaped heat collector of double-glass structure. A low boiling point medium is placed between the inner and outer cones to cause corona discharge in vapor generated by absorbing the solar heat, and generate corona wind for an attempt to accelerate heat transfer into a heat exchanger. Thus, development was made on a cone-shaped high-efficiency heat collector utilizing electro-hydrodynamical (EHD) effect, and elucidation was given on dynamic phenomena of an electro-thermal fluid. Heat transfer in the EHD heat collector has a possibility of being accelerated by generation of ionic wind. In addition, it is thought that there would be an optimum value in applied voltage to increase electric charge supply as a result of corona discharge. 1 ref., 2 figs.

Measuring approach for effect of refreshmental acceleration into the soil environment; Kankyo sosei kasoku koka no ikkeikeisoku apurochi

Energy Technology Data Exchange (ETDEWEB)

Isogai, H. [Electrotechnical Laboratorys, Tsukuba (Japan)

1998-12-05

This paper mainly describes to a measuring method for effect of refreshmental acceleration into the soil which were employing hamlet of micro organisms for accelerating revival or refreshment of environment especially purification of sludge in bottom of polluted ponds, lakes and grounds. (author)

Stirling engine application study

Science.gov (United States)

Teagan, W. P.; Cunningham, D.

1983-01-01

A range of potential applications for Stirling engines in the power range from 0.5 to 5000 hp is surveyed. Over one hundred such engine applications are grouped into a small number of classes (10), with the application in each class having a high degree of commonality in technical performance and cost requirements. A review of conventional engines (usually spark ignition or Diesel) was then undertaken to determine the degree to which commercial engine practice now serves the needs of the application classes and to detemine the nature of the competition faced by a new engine system. In each application class the Stirling engine was compared to the conventional engines, assuming that objectives of ongoing Stirling engine development programs are met. This ranking process indicated that Stirling engines showed potential for use in all application classes except very light duty applications (lawn mowers, etc.). However, this potential is contingent on demonstrating much greater operating life and reliability than has been demonstrated to date by developmental Stirling engine systems. This implies that future program initiatives in developing Stirling engine systems should give more emphasis to life and reliability issues than has been the case in ongoing programs.

Mobile food ordering application

OpenAIRE

Yang, Fan

2014-01-01

The purpose of this thesis was to build a food ordering client server application for Tom Yum Thai Oy, which is a Thai restaurant in Vaasa. For the customer, this application provides a view of current food information (category, name, image，price, description etc.) on the website and Android application. The customer can order food from these two platforms. For the administrator in restaurant, this application offers a series of operations to add, update, delete and query the information of ...

Industrial Application of Accelerators

CERN Multimedia

CERN. Geneva

2017-01-01

At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Univer...

Industrial Application of Accelerators

CERN Multimedia

CERN. Geneva

2017-01-01

At CERN, we are very familiar with large, high energy particle accelerators. However, in the world outside CERN, there are more than 35000 accelerators which are used for applications ranging from treating cancer, through making better electronics to removing harmful micro-organisms from food and water. These are responsible for around $0.5T of commerce each year. Almost all are less than 20 MeV and most use accelerator types that are somewhat different from what is at CERN. These lectures will describe some of the most common applications, some of the newer applications in development and the accelerator technology used for them. It will also show examples of where technology developed for particle physics is now being studied for these applications. Rob Edgecock is a Professor of Accelerator Science, with a particular interest in the medical applications of accelerators. He works jointly for the STFC Rutherford Appleton Laboratory and the International Institute for Accelerator Applications at the Uni...

Applications of Photocatalytic Disinfection

Directory of Open Access Journals (Sweden)

Joanne Gamage

2010-01-01

Full Text Available Due to the superior ability of photocatalysis to inactivate a wide range of harmful microorganisms, it is being examined as a viable alternative to traditional disinfection methods such as chlorination, which can produce harmful byproducts. Photocatalysis is a versatile and effective process that can be adapted for use in many applications for disinfection in both air and water matrices. Additionally, photocatalytic surfaces are being developed and tested for use in the context of “self-disinfecting” materials. Studies on the photocatalytic technique for disinfection demonstrate this process to have potential for widespread applications in indoor air and environmental health, biological, and medical applications, laboratory and hospital applications, pharmaceutical and food industry, plant protection applications, wastewater and effluents treatment, and drinking water disinfection. Studies on photocatalytic disinfection using a variety of techniques and test organisms are reviewed, with an emphasis on the end-use application of developed technologies and methods.

Android Applications Security

Directory of Open Access Journals (Sweden)

Paul POCATILU

2011-01-01

Full Text Available The use of smartphones worldwide is growing very fast and also the malicious attacks have increased. The mobile security applications development keeps the pace with this trend. The paper presents the vulnerabilities of mobile applications. The Android applications and devices are analyzed through the security perspective. The usage of restricted API is also presented. The paper also focuses on how users can prevent these malicious attacks and propose some prevention measures, including the architecture of a mobile security system for Android devices.

14 CFR 414.11 - Application.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Application. 414.11 Section 414.11 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING SAFETY APPROVALS Application Procedures § 414.11 Application. (a) The application must...

32 CFR 724.113 - Application.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Application. 724.113 Section 724.113 National... Definitions § 724.113 Application. In the context of this Manual, a written application to the NDRB for the... must be used for the application. ...

45 CFR 2400.10 - Application.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Application. 2400.10 Section 2400.10 Public Welfare Regulations Relating to Public Welfare (Continued) JAMES MADISON MEMORIAL FELLOWSHIP FOUNDATION FELLOWSHIP PROGRAM REQUIREMENTS Application § 2400.10 Application. Eligible applicants for fellowships must...

PSO-Ensemble Demo Application

DEFF Research Database (Denmark)

2004-01-01

Within the framework of the PSO-Ensemble project (FU2101) a demo application has been created. The application use ECMWF ensemble forecasts. Two instances of the application are running; one for Nysted Offshore and one for the total production (except Horns Rev) in the Eltra area. The output...

Applications of ionizing radiations

International Nuclear Information System (INIS)

2014-01-01

Developments in standard applications and brand new nuclear technologies, with high impact on the future of the agriculture, medicine, industry and the environmental preservation. The Radiation Technology Center (CTR) mission is to apply the radiation and radioisotope technologies in Industry, Health, Agriculture, and Environmental Protection, expanding the scientific knowledge, improving human power resources, transferring technology, generating products and offering services for the Brazilian society. The CTR main R and D activities are in consonance with the IPEN Director Plan (2011-2013) and the Applications of Ionizing Radiation Program, with four subprograms: Irradiation of Food and Agricultural Products; Radiation and Radioisotopes Applications in Industry and Environment; Radioactive Sources and Radiation Applications in Human Health; and Radioactive Facilities and Equipment for the Applications of Nuclear Techniques

GPU computing and applications

CERN Document Server

See, Simon

2015-01-01

This book presents a collection of state of the art research on GPU Computing and Application. The major part of this book is selected from the work presented at the 2013 Symposium on GPU Computing and Applications held in Nanyang Technological University, Singapore (Oct 9, 2013). Three major domains of GPU application are covered in the book including (1) Engineering design and simulation; (2) Biomedical Sciences; and (3) Interactive & Digital Media. The book also addresses the fundamental issues in GPU computing with a focus on big data processing. Researchers and developers in GPU Computing and Applications will benefit from this book. Training professionals and educators can also benefit from this book to learn the possible application of GPU technology in various areas.

Applications of ionizing radiations

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-07-01

Developments in standard applications and brand new nuclear technologies, with high impact on the future of the agriculture, medicine, industry and the environmental preservation. The Radiation Technology Center (CTR) mission is to apply the radiation and radioisotope technologies in Industry, Health, Agriculture, and Environmental Protection, expanding the scientific knowledge, improving human power resources, transferring technology, generating products and offering services for the Brazilian society. The CTR main R and D activities are in consonance with the IPEN Director Plan (2011-2013) and the Applications of Ionizing Radiation Program, with four subprograms: Irradiation of Food and Agricultural Products; Radiation and Radioisotopes Applications in Industry and Environment; Radioactive Sources and Radiation Applications in Human Health; and Radioactive Facilities and Equipment for the Applications of Nuclear Techniques.

14 CFR 413.7 - Application.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Application. 413.7 Section 413.7 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING LICENSE APPLICATION PROCEDURES § 413.7 Application. (a) Form. An application must be in...

24 CFR 941.301 - Application.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Application. 941.301 Section 941... PUBLIC HOUSING DEVELOPMENT Application and Proposal § 941.301 Application. If funding is made available for public housing development, HUD will provide information about fund allocation, application...

SAMP: Application Messaging for Desktop and Web Applications

Science.gov (United States)

Taylor, M. B.; Boch, T.; Fay, J.; Fitzpatrick, M.; Paioro, L.

2012-09-01

SAMP, the Simple Application Messaging Protocol, is a technology which allows tools to communicate. It is deployed in a number of desktop astronomy applications including ds9, Aladin, TOPCAT, World Wide Telescope and numerous others, and makes it straightforward for a user to treat a selection of these tools as a loosely-integrated suite, combining the most powerful features of each. It has been widely used within Virtual Observatory contexts, but is equally suitable for non-VO use. Enabling SAMP communication from web-based content has long been desirable. An obvious use case is arranging for a click on a web page link to deliver an image, table or spectrum to a desktop viewer, but more sophisticated two-way interaction with rich internet applications would also be possible. Use from the web however presents some problems related to browser sandboxing. We explain how the SAMP Web Profile, introduced in version 1.3 of the SAMP protocol, addresses these issues, and discuss the resulting security implications.

Application of fibre reinforced plastic sandwich structures for automotive crashworthiness applications

NARCIS (Netherlands)

Lukaszewicz, D.; Blok, L.G.; Kratz, J.; Ward, C.; Kassapoglou, C.; Elmarakbi, A.; Araújo, A.L.

2016-01-01

In this work the application of fibre reinforced plastic (FRP) sandwich
structures, with particular focus on aramid fibre tufted sandwiches is being studied for
automotive crashworthiness applications using impact testing and numerical simulation.

Current status of postnatal depression smartphone applications available on application stores: an information quality analysis.

Science.gov (United States)

Zhang, Melvyn Wb; Ho, Roger Cm; Loh, Alvona; Wing, Tracey; Wynne, Olivia; Chan, Sally Wai Chi; Car, Josip; Fung, Daniel Shuen Sheng

2017-11-14

It is the aim of the current research to identify some common functionalities of postnatal application, and to determine the quality of the information content of postnatal depression application using validated scales that have been applied for applications in other specialties. To determine the information quality of the postnatal depression smartphone applications, the two most widely used smartphone application stores, namely Apple iTunes as well as Google Android Play store, were searched between 20May and 31 May. No participants were involved. The inclusion criteria for the application were that it must have been searchable using the keywords 'postnatal', 'pregnancy', 'perinatal', 'postpartum' and 'depression', and must be in English language. The Silberg Scale was used in the assessment of the information quality of the smartphone applications. The information quality score was the primary outcome measure. Our current results highlighted that while there is currently a myriad of applications, only 14 applications are specifically focused on postnatal depression. In addition, the majority of the currently available applications on the store have only disclosed their last date of modification as well as ownership. There remain very limited disclosures about the information of the authors, as well as the references for the information included in the application itself. The average score for the Silberg Scale for the postnatal applications we have analysed is 3.0. There remains a need for healthcare professionals and developers to jointly conceptualise new applications with better information quality and evidence base. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Excimer laser applications

International Nuclear Information System (INIS)

Fantoni, R.

1988-01-01

This lecture deals with laser induced material photoprocessing, especially concerning those processes which are initiated by u.v. lasers (mostly excimer laser). Advantages of using the u.v. radiation emitted by excimer lasers, both in photophysical and photochemical processes of different materials, are discussed in detail. Applications concerning microelectronics are stressed with respect to other applications in different fields (organic chemistry, medicine). As further applications of excimer lasers, main spectroscopic techniques for ''on line'' diagnostics which employ excimer pumped dye lasers, emitting tunable radiation in the visible and near u.v. are reviewed

14 CFR 372.30 - Application.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Application. 372.30 Section 372.30... REGULATIONS OVERSEAS MILITARY PERSONNEL CHARTERS Operating Authorization § 372.30 Application. (a) Application... Authorities Division, for filing instructions. The application shall be certified by a responsible official of...

23 CFR 625.3 - Application.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Application. 625.3 Section 625.3 Highways FEDERAL... FOR HIGHWAYS § 625.3 Application. (a) Applicable Standards. (1) Design and construction standards for..., policy, or standard specification will govern. (c) Application of FHWA regulations, although cited in...

Mongoose for application development

CERN Document Server

Holmes, Simon

2013-01-01

This book is a mini tutorial full of code examples and strategies to give you plenty of options when building your own applications with MongoDB.This book is ideal for people who want to develop applications on the Node.js stack quickly and efficiently. Prior knowledge of the stack is not essential as the book briefly covers the installation of the core components and builds all aspects of the example application. The focus of the book is on what Mongoose adds to you applications, so experienced Node.js developers will also benefit.

JavaScript Web Applications

CERN Document Server

MacCaw, Alex

2011-01-01

Building rich JavaScript applications that bring a desktop experience to the Web requires moving state from the server to the client side-not a simple task. This hands-on book takes proficient JavaScript developers through all the steps necessary to create state-of-the-art applications, including structure, templating, frameworks, communicating with the server, and many other issues. Throughout the book, you'll work with real-world example applications to help you grasp the concepts involved. Learn how to create JavaScript applications that offer a more responsive and improved experience. U

Progressive Web applications

CERN Multimedia

CERN. Geneva

2017-01-01

Progressive Web Applications are native-like applications running inside of a browser context. In my presentation I would like describe their characteristics, benchmarks and building process using a quick and simple case study example with focus on Service Workers api.

49 CFR 385.603 - Application.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Application. 385.603 Section 385.603... Special Rules for New Entrant Non-North America-Domiciled Carriers § 385.603 Application. (a) Each applicant applying under this subpart must submit an application that consists of: (1) Form OP-1(NNA...

14 CFR 211.31 - Application.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Application. 211.31 Section 211.31... REGULATIONS APPLICATIONS FOR PERMITS TO FOREIGN AIR CARRIERS Freely Associated State Air Carriers § 211.31 Application. The application shall include, in addition to other requirements of this part, documentation...

25 CFR 67.6 - Application forms.

Science.gov (United States)

2010-04-01

... application form is filed by a sponsor, the name and address of the sponsor and the sponsor's relationship to... the applicant's mailing address on the application form. Thereafter, the applicant or sponsor shall... applicant. Otherwise, the mailing address as stated on the application form shall be accepted as the address...

Radioisotopes production and applications

International Nuclear Information System (INIS)

Dash, Ashutosh

2015-01-01

Application of radioisotopes for both medical and industrial applications constitutes one of the most important peaceful uses of atomic energy. The striking diffusion and the exciting perspective of radioisotope for a plethora of medical and industrial applications are mainly attributable to the penetrating and ionization properties of radiation emanating from radioisotopes. The revolutionary medical applications of radioisotopes for the diagnosis and treatment of a multitude of diseases are causing a rapid expansion of the nuclear medicine field. While the industrial uses of radioisotopes are not expanding as quickly, also require large amounts of radioisotopes. Production of radioisotopes is not only the first step, but also the most crucial for the success as well as sustainable growth of radioisotope applications. With the rapid growth and expanding areas of applications, the demands for isotopes have increased several folds. A number of radioisotopes of different physical half-life, energy of the particle or gamma emission, specific activity and chemistry are now regularly produced both at commercial centers as well as at selected nuclear science research institutes utilizing reactors and cyclotrons to meet the ever growing need

21 CFR 812.20 - Application.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Application. 812.20 Section 812.20 Food and Drugs... INVESTIGATIONAL DEVICE EXEMPTIONS Application and Administrative Action § 812.20 Application. (a) Submission. (1) A sponsor shall submit an application to FDA if the sponsor intends to use a significant risk device...

46 CFR 8.520 - Application.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Application. 8.520 Section 8.520 Shipping COAST GUARD... Streamlined Inspection Program § 8.520 Application. To apply for SIP enrollment, a company will submit an application, in writing, to the cognizant OCMI. The application must contain the following: (a) A statement...

Direct application of geothermal energy

Energy Technology Data Exchange (ETDEWEB)

Reistad, G.M.

1980-01-01

An overall treatment of direct geothermal applications is presented with an emphasis on the above-ground engineering. The types of geothermal resources and their general extent in the US are described. The potential market that may be served with geothermal energy is considered briefly. The evaluation considerations, special design aspects, and application approaches for geothermal energy use in each of the applications are considered. The present applications in the US are summarized and a bibliography of recent studies and applications is provided. (MHR)

Nanomaterials for Defense Applications

Science.gov (United States)

Turaga, Uday; Singh, Vinitkumar; Lalagiri, Muralidhar; Kiekens, Paul; Ramkumar, Seshadri S.

Nanotechnology has found a number of applications in electronics and healthcare. Within the textile field, applications of nanotechnology have been limited to filters, protective liners for chemical and biological clothing and nanocoatings. This chapter presents an overview of the applications of nanomaterials such as nanofibers and nanoparticles that are of use to military and industrial sectors. An effort has been made to categorize nanofibers based on the method of production. This chapter particularly focuses on a few latest developments that have taken place with regard to the application of nanomaterials such as metal oxides in the defense arena.

Enabling network-aware applications

Energy Technology Data Exchange (ETDEWEB)

Tierney, Brian L.; Gunter, Dan; Lee, Jason; Stouffer, Martin

2001-08-01

Many high performance distributed applications use only a small fraction of their available bandwidth. A common cause of this problem is not a flaw in the application design, but rather improperly tuned network settings. Proper tuning techniques, such as setting the correct TCP buffers and using parallel streams, are well known in the networking community, but outside the networking community they are infrequently applied. In this paper, we describe a service that makes the task of network tuning trivial for application developers and users. Widespread use of this service should virtually eliminate a common stumbling block for high performance distributed applications.

Engineering Adaptive Applications

DEFF Research Database (Denmark)

Dolog, Peter

for a domain.In this book, we propose a new domain engineering framework which extends a development process of Web applications with techniques required when designing such adaptive customizable Web applications. The framework is provided with design abstractions which deal separately with information served...

Underground engineering applications

International Nuclear Information System (INIS)

Nordyke, M.D.

1969-01-01

Developments of any underground engineering application utilizing nuclear explosives involve answering the same questions one encounters in any new area of technology: What are the characteristics of the new tool? How is it applicable to the job to be done? Is it safe to use? and, most importantly, is its use economically acceptable? The many facets of the answers to these questions will be explored. The general types of application presently under consideration will also be reviewed, with particular emphasis on those specific projects actively being worked on by commercial interests and by the U.S. Atomic Energy Commission. (author)

Underground engineering applications

Energy Technology Data Exchange (ETDEWEB)

Nordyke, M D [Lawrence Radiation Laboratory, Livermore, CA (United States)

1969-07-01

Developments of any underground engineering application utilizing nuclear explosives involve answering the same questions one encounters in any new area of technology: What are the characteristics of the new tool? How is it applicable to the job to be done? Is it safe to use? and, most importantly, is its use economically acceptable? The many facets of the answers to these questions will be explored. The general types of application presently under consideration will also be reviewed, with particular emphasis on those specific projects actively being worked on by commercial interests and by the U.S. Atomic Energy Commission. (author)

Geometry and its applications

CERN Document Server

Meyer, Walter J

2006-01-01

Meyer''s Geometry and Its Applications, Second Edition, combines traditional geometry with current ideas to present a modern approach that is grounded in real-world applications. It balances the deductive approach with discovery learning, and introduces axiomatic, Euclidean geometry, non-Euclidean geometry, and transformational geometry. The text integrates applications and examples throughout and includes historical notes in many chapters. The Second Edition of Geometry and Its Applications is a significant text for any college or university that focuses on geometry''s usefulness in other disciplines. It is especially appropriate for engineering and science majors, as well as future mathematics teachers.* Realistic applications integrated throughout the text, including (but not limited to): - Symmetries of artistic patterns- Physics- Robotics- Computer vision- Computer graphics- Stability of architectural structures- Molecular biology- Medicine- Pattern recognition* Historical notes included in many chapters...

47 CFR 22.939 - Site availability requirements for applications competing with cellular renewal applications.

Science.gov (United States)

2010-10-01

... competing with cellular renewal applications. 22.939 Section 22.939 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES PUBLIC MOBILE SERVICES Cellular Radiotelephone Service § 22.939 Site availability requirements for applications competing with cellular renewal applications. In...

PRIBIC Application

International Nuclear Information System (INIS)

Pascual Alonso, J.L.; Barcala Riveira, J.M.

2002-01-01

PRIBIC plant (Pollutants Reduction In small Biomass Combustion systems) at CEDER is a facility specifically designed to do biomass combustion tests. In these tests is necessary to know the values of different sensors in real time. With this information the PRIBIC plant is regulated to its optimum point of work and its possible to follow the operation criteria and get test objectives. Different electronic instruments record information about the plant operation. A software application was developed to let a centralised motorization of that information. The application communicates with the instrumentation, recovers data, lets operators see data in real time and saves the information in files. An important part of this document describes that application, and some considerations to generalise this kind of developments to other Experimental Plants, including cost estimations. Descriptions of plant, analysis of the problem, result evaluations, and conclusions can also be found in the document. (Author) 13 refs

Applications of radionuclides in industry

International Nuclear Information System (INIS)

Leveque, P.

1955-01-01

After a brief recall of a few concepts (mass number, charge and beams properties) and the description of used detectors (ionization chamber, Geiger-Mueller counter, scintillation counters), some radionuclides applications are described. In a first part, the well-developed applications are presented in three distinct groups: continuous applications such as β and γ gauges (determination hydrogen content of an hydrocarbon and content of an emulsion; discharge of static electricity), discontinuous applications such as radiography and autoradiography, wear or manufacture problems (distribution of a fungicide on tobacco) and finally, applications in research laboratories such as diffusion, exchange and solubility. It also describes the applications which are still in development such as the action of beams on matter (reticulation and degradation of polymers, monomers polymerisation, cold sterilization). In conclusion, few advices on the opportunity of such applications and the choice of the radionuclides are given. (M.P.)

Terahertz Sensing, Imaging and Applications

Energy Technology Data Exchange (ETDEWEB)

Otani, C.; Hoshing, H.; Sasaki, Y.; Maki, K.; Hayashi, A. [RIKEN Advanced Science Institute, Sendai (Japan)

2008-11-15

Diagnosis using terahertz (THz) wave holds a great potential for various applications in various fields because of its transmittance to many soft materials with the good spatial resolution. In addition, the presence of specific spectral absorption features of crystalline materials is also important for many applications. Such features are different from material to material to material and is applicable for identifying materials inside packages that are opaque to visible light. One of the most impressive examples of such applications is the detection of illicit drugs inside envelopes. In this talk, we will present our recent topics of THz sensing, imaging and applications including this example. We will also present the cancer diagnosis, an application of the photonic crystal to high sensitivity detection, and gas spectroscopy if we have enough time. We also would like to briefly review the recent topics related to THz applications.

Terahertz Sensing, Imaging and Applications

International Nuclear Information System (INIS)

Otani, C.; Hoshing, H.; Sasaki, Y.; Maki, K.; Hayashi, A.

2008-01-01

Diagnosis using terahertz (THz) wave holds a great potential for various applications in various fields because of its transmittance to many soft materials with the good spatial resolution. In addition, the presence of specific spectral absorption features of crystalline materials is also important for many applications. Such features are different from material to material to material and is applicable for identifying materials inside packages that are opaque to visible light. One of the most impressive examples of such applications is the detection of illicit drugs inside envelopes. In this talk, we will present our recent topics of THz sensing, imaging and applications including this example. We will also present the cancer diagnosis, an application of the photonic crystal to high sensitivity detection, and gas spectroscopy if we have enough time. We also would like to briefly review the recent topics related to THz applications

Electronic Submissions of Pesticide Applications

Science.gov (United States)

Applications for pesticide registration can be submitted electronically, including forms, studies, and draft product labeling. Applicants need not submit multiple electronic copies of any pieces of their applications.

Oracle Application Express 4 Recipes

CERN Document Server

Zehoo, Edmund

2011-01-01

Oracle Application Express 4 Recipes provides an example-based approach to learning Application Express - the ground-breaking, rapid application development platform included with every Oracle Database license. The recipes format is ideal for the quick-study who just wants a good example or two to kick start their thinking and get pointed in the right direction. The recipes cover the gamut of Application Express development. Author and Application Express expert Edmund Zehoo shows how to create data entry screens, visualize data in the form of reports and charts, implement validation and back-

LCS Content Document Application

Science.gov (United States)

Hochstadt, Jake

2011-01-01

My project at KSC during my spring 2011 internship was to develop a Ruby on Rails application to manage Content Documents..A Content Document is a collection of documents and information that describes what software is installed on a Launch Control System Computer. It's important for us to make sure the tools we use everyday are secure, up-to-date, and properly licensed. Previously, keeping track of the information was done by Excel and Word files between different personnel. The goal of the new application is to be able to manage and access the Content Documents through a single database backed web application. Our LCS team will benefit greatly with this app. Admin's will be able to login securely to keep track and update the software installed on each computer in a timely manner. We also included exportability such as attaching additional documents that can be downloaded from the web application. The finished application will ease the process of managing Content Documents while streamlining the procedure. Ruby on Rails is a very powerful programming language and I am grateful to have the opportunity to build this application.

Database Application Schema Forensics

Directory of Open Access Journals (Sweden)

Hector Quintus Beyers

2014-12-01

Full Text Available The application schema layer of a Database Management System (DBMS can be modified to deliver results that may warrant a forensic investigation. Table structures can be corrupted by changing the metadata of a database or operators of the database can be altered to deliver incorrect results when used in queries. This paper will discuss categories of possibilities that exist to alter the application schema with some practical examples. Two forensic environments are introduced where a forensic investigation can take place in. Arguments are provided why these environments are important. Methods are presented how these environments can be achieved for the application schema layer of a DBMS. A process is proposed on how forensic evidence should be extracted from the application schema layer of a DBMS. The application schema forensic evidence identification process can be applied to a wide range of forensic settings.

Application Security Automation

Science.gov (United States)

Malaika, Majid A.

2011-01-01

With today's high demand for online applications and services running on the Internet, software has become a vital component in our lives. With every revolutionary technology comes challenges unique to its characteristics; for online applications, security is one huge concern and challenge. Currently, there are several schemes that address…

Comparing Android Applications to Find Copying

Directory of Open Access Journals (Sweden)

Larry Melling

2012-03-01

Full Text Available The Android smartphone operating system includes a Java mobile development platform that provides for rapid development and deployment of a wide variety of applications. The open nature of the platform means that reverse engineering of applications is relatively easy, and many developers are concerned as applications similar to their own show up in the Android marketplace and want to know if these applications are pirated. Fortunately, the same characteristics that make an Android application easy to reverse engineer and copy also provide opportunities for Android developers to compare downloaded applications to their own. This paper describes the process for comparing a developer’s application with a downloaded application and defines an identifiability metric to quantify the degree to which an application can be identified by its bytecode.

Applications of high power microwaves

International Nuclear Information System (INIS)

Benford, J.; Swegle, J.

1993-01-01

The authors address a number of applications for HPM technology. There is a strong symbiotic relationship between a developing technology and its emerging applications. New technologies can generate new applications. Conversely, applications can demand development of new technological capability. High-power microwave generating systems come with size and weight penalties and problems associated with the x-radiation and collection of the electron beam. Acceptance of these difficulties requires the identification of a set of applications for which high-power operation is either demanded or results in significant improvements in peRFormance. The authors identify the following applications, and discuss their requirements and operational issues: (1) High-energy RF acceleration; (2) Atmospheric modification (both to produce artificial ionospheric mirrors for radio waves and to save the ozone layer); (3) Radar; (4) Electronic warfare; and (5) Laser pumping. In addition, they discuss several applications requiring high average power than border on HPM, power beaming and plasma heating

25 CFR 61.6 - Application forms.

Science.gov (United States)

2010-04-01

... is claimed. (2) If the application form is filed by a sponsor, the name and address of sponsor and... furnish the applicant's mailing address on the application form. Thereafter, the applicant or sponsor... identification of the application, otherwise the mailing address as stated on the form shall be acceptable as the...

Publication misrepresentation among anesthesiology residency applicants.

Science.gov (United States)

Neuman, Stephanie A; Long, Timothy R; Rose, Steven H

2011-03-01

Publication misrepresentation has been documented among applicants for residency positions in several specialties. However, these data are not available for anesthesiology applicants. Our purpose in this study was to document the prevalence of publication misrepresentation among applicants to a single anesthesiology residency, to compare anesthesiology publication misrepresentation data with similar data in other specialties, and to determine how often publication misrepresentation leads to an unfair competitive advantage in the application process. Applications to the Mayo School of Graduate Medical Education anesthesiology core residency in Rochester, Minnesota, were reviewed for publication misrepresentations using Medline and PubMed databases, Mayo Clinic library databases, and/or review by a qualified medical librarian. Misrepresented publications underwent further review to identify fraudulent publications and/or citation errors that provide an unfair competitive advantage. The authors found that 2.4% of the applications (13 of 532) included fraudulent publications, 6.6% of the applications with at least 1 publication (13 of 197) included ≥1 that was fraudulent, and 2.9% of all cited publications (15 of 522) were fraudulent. In addition, 0.9% of the applications (5 of 532) contained a citation error that, although not grossly fraudulent, could have favorably affected the applicant's competitiveness for a residency position. Misrepresented publications were fairly common among anesthesiology residency applicants. However, only a small percentage of applicants listed misrepresented publications that were clearly fraudulent or contained a citation error that conferred a competitive advantage. Identification of fraudulent publications on Electronic Residency Application Service applications is important to maintain the integrity of the application process.

Deaf mobile application accessibility requirements

Science.gov (United States)

Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily

2016-08-01

Requirement for deaf mobile applications need to be analysed to ensure the disabilities need are instilled into the mobile applications developed for them. Universal design is understandable to comply every user needs, however specific disability is argued by the authors to have different need and requirements. These differences are among the reasons for these applications being developed to target for a specific group of people, however they are less usable and later abandoned. This study focuses on deriving requirements that are needed by the deaf in their mobile applications that are meant specifically for them. Studies on previous literature was conducted it can be concluded that graphic, text, multimedia and sign language interpreter are among mostly required features to be included in their mobile application to ensure the applications are usable for this community.

Support vector machines applications

CERN Document Server

Guo, Guodong

2014-01-01

Support vector machines (SVM) have both a solid mathematical background and good performance in practical applications. This book focuses on the recent advances and applications of the SVM in different areas, such as image processing, medical practice, computer vision, pattern recognition, machine learning, applied statistics, business intelligence, and artificial intelligence. The aim of this book is to create a comprehensive source on support vector machine applications, especially some recent advances.

Computer algebra applications

International Nuclear Information System (INIS)

Calmet, J.

1982-01-01

A survey of applications based either on fundamental algorithms in computer algebra or on the use of a computer algebra system is presented. Recent work in biology, chemistry, physics, mathematics and computer science is discussed. In particular, applications in high energy physics (quantum electrodynamics), celestial mechanics and general relativity are reviewed. (Auth.)

Quality Analysis of Mobile Applications

Directory of Open Access Journals (Sweden)

Ion IVAN

2011-01-01

Full Text Available Mobile applications are defined and different types of mobile applications are identified. Characteristics of quality are defined and their indicators are constructed to measure levels. Take into account 11 parameters analysis for mobile applications, which are arranged using weights and do a detailed analysis of the system of weights. For SMSEncrypt application performance measurement is done using an aggregate indicator based on the obtained weights system.

Thermal Cameras and Applications

DEFF Research Database (Denmark)

Gade, Rikke; Moeslund, Thomas B.

2014-01-01

Thermal cameras are passive sensors that capture the infrared radiation emitted by all objects with a temperature above absolute zero. This type of camera was originally developed as a surveillance and night vision tool for the military, but recently the price has dropped, significantly opening up...... a broader field of applications. Deploying this type of sensor in vision systems eliminates the illumination problems of normal greyscale and RGB cameras. This survey provides an overview of the current applications of thermal cameras. Applications include animals, agriculture, buildings, gas detection......, industrial, and military applications, as well as detection, tracking, and recognition of humans. Moreover, this survey describes the nature of thermal radiation and the technology of thermal cameras....

Cloud Application Architectures Building Applications and Infrastructure in the Cloud

CERN Document Server

Reese, George

2009-01-01

If you're involved in planning IT infrastructure as a network or system architect, system administrator, or developer, this book will help you adapt your skills to work with these highly scalable, highly redundant infrastructure services. Cloud Application Architectures will help you determine whether and how to put your applications into these virtualized services, with critical guidance on issues of cost, availability, performance, scaling, privacy, and security.

47 CFR 76.502 - Time limits applicable to franchise authority consideration of transfer applications.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Time limits applicable to franchise authority... Cable Systems § 76.502 Time limits applicable to franchise authority consideration of transfer applications. (a) A franchise authority shall have 120 days from the date of submission of a completed FCC Form...

Reconstruction of a ring applicator using CT imaging: impact of the reconstruction method and applicator orientation

International Nuclear Information System (INIS)

Hellebust, Taran Paulsen; Tanderup, Kari; Bergstrand, Eva Stabell; Knutsen, Bjoern Helge; Roeislien, Jo; Olsen, Dag Rune

2007-01-01

The purpose of this study is to investigate whether the method of applicator reconstruction and/or the applicator orientation influence the dose calculation to points around the applicator for brachytherapy of cervical cancer with CT-based treatment planning. A phantom, containing a fixed ring applicator set and six lead pellets representing dose points, was used. The phantom was CT scanned with the ring applicator at four different angles related to the image plane. In each scan the applicator was reconstructed by three methods: (1) direct reconstruction in each image (DR) (2) reconstruction in multiplanar reconstructed images (MPR) and (3) library plans, using pre-defined applicator geometry (LIB). The doses to the lead pellets were calculated. The relative standard deviation (SD) for all reconstruction methods was less than 3.7% in the dose points. The relative SD for the LIB method was significantly lower (p < 0.05) than for the DR and MPR methods for all but two points. All applicator orientations had similar dose calculation reproducibility. Using library plans for applicator reconstruction gives the most reproducible dose calculation. However, with restrictive guidelines for applicator reconstruction the uncertainties for all methods are low compared to other factors influencing the accuracy of brachytherapy

Computer Applications in Educational Audiology.

Science.gov (United States)

Mendel, Lisa Lucks; And Others

1995-01-01

This article provides an overview of how computer technologies can be used by educational audiologists. Computer technologies are classified into three categories: (1) information systems applications; (2) screening and diagnostic applications; and (3) intervention applications. (Author/DB)

MedlinePlus Connect: Web Application

Science.gov (United States)

... MedlinePlus Connect → Web Application URL of this page: https://medlineplus.gov/connect/application.html MedlinePlus Connect: Web ... will change.) Old URLs New URLs Web Application https://apps.nlm.nih.gov/medlineplus/services/mpconnect.cfm? ...

Credential Application Awaiting Information

Data.gov (United States)

Department of Homeland Security — When a Credential application or required documentation is incomplete, an Awaiting Information letter is issued. The application process cannot continue until all...

Application analysis tools for ASIP design: application profiling and instruction-set customization

National Research Council Canada - National Science Library

Karuri, Kingshuk; Leupers, Ranier

2011-01-01

... of the operating system they are targeting and execute them on the main application processor in the SmartPhone. However these are not the only applications that need to run on the SmartPhone. There are many underlying applications, or lets better call them algorithms, that have very demanding performance and power consumption targets, yet need to be flexible. Here is where the custom processor comes into play for the implementation of algorithms that will have certain variability but are covering a narrow enough design sp...

Plagiarism in residency application essays.

Science.gov (United States)

Segal, Scott; Gelfand, Brian J; Hurwitz, Shelley; Berkowitz, Lori; Ashley, Stanley W; Nadel, Eric S; Katz, Joel T

2010-07-20

Anecdotal reports suggest that some residency application essays contain plagiarized content. To determine the prevalence of plagiarism in a large cohort of residency application essays. Retrospective cohort study. 4975 application essays submitted to residency programs at a single large academic medical center between 1 September 2005 and 22 March 2007. Specialized software was used to compare residency application essays with a database of Internet pages, published works, and previously submitted essays and the percentage of the submission matching another source was calculated. A match of more than 10% to an existing work was defined as evidence of plagiarism. Evidence of plagiarism was found in 5.2% (95% CI, 4.6% to 5.9%) of essays. The essays of non-U.S. citizens were more likely to demonstrate evidence of plagiarism. Other characteristics associated with the prevalence of plagiarism included medical school location outside the United States and Canada; previous residency or fellowship; lack of research experience, volunteer experience, or publications; a low United States Medical Licensing Examination Step 1 score; and non-membership in the Alpha Omega Alpha Honor Medical Society. The software database is probably incomplete, the 10%-match threshold for defining plagiarism has not been statistically validated, and the study was confined to applicants to 1 institution. Evidence of matching content in an essay cannot be used to infer the applicant's intent and is not sensitive to variations in the cultural context of copying in some societies. Evidence of plagiarism in residency application essays is more common in international applicants but was found in those by applicants to all specialty programs, from all medical school types, and even among applicants with significant academic honors. No external funding.

Large-scale multimedia modeling applications

International Nuclear Information System (INIS)

Droppo, J.G. Jr.; Buck, J.W.; Whelan, G.; Strenge, D.L.; Castleton, K.J.; Gelston, G.M.

1995-08-01

Over the past decade, the US Department of Energy (DOE) and other agencies have faced increasing scrutiny for a wide range of environmental issues related to past and current practices. A number of large-scale applications have been undertaken that required analysis of large numbers of potential environmental issues over a wide range of environmental conditions and contaminants. Several of these applications, referred to here as large-scale applications, have addressed long-term public health risks using a holistic approach for assessing impacts from potential waterborne and airborne transport pathways. Multimedia models such as the Multimedia Environmental Pollutant Assessment System (MEPAS) were designed for use in such applications. MEPAS integrates radioactive and hazardous contaminants impact computations for major exposure routes via air, surface water, ground water, and overland flow transport. A number of large-scale applications of MEPAS have been conducted to assess various endpoints for environmental and human health impacts. These applications are described in terms of lessons learned in the development of an effective approach for large-scale applications

Stable Structures for Distributed Applications

Directory of Open Access Journals (Sweden)

Eugen DUMITRASCU

2008-01-01

Full Text Available For distributed applications, we define the linear, tree and graph structure types with different variants and modalities to aggregate them. The distributed applications have assigned structures that through their characteristics influence the costs of stages for developing cycle and the costs for exploitation, transferred to each user. We also present the quality characteristics of a structure for a stable application, which is focused on stability characteristic. For that characteristic we define the estimated measure indicators for a level. The influence of the factors of stability and the ways for increasing it are thus identified, and at the same time the costs of development stages, the costs of usage and the costs of maintenance to be keep on between limits that assure the global efficiency of application. It is presented the base aspects for distributed applications: definition, peculiarities and importance. The aspects for the development cycle of distributed application are detailed. In this article, we alongside give the mechanisms for building the defined structures and analyze the complexity of the defined structures for a distributed application of a virtual store.

Applications for approval to market a new drug; complete response letter; amendments to unapproved applications. Final rule.

Science.gov (United States)

2008-07-10

The Food and Drug Administration (FDA) is amending its regulations on new drug applications (NDAs) and abbreviated new drug applications (ANDAs) for approval to market new drugs and generic drugs (drugs for which approval is sought in an ANDA). The final rule discontinues FDA's use of approvable letters and not approvable letters when taking action on marketing applications. Instead, we will send applicants a complete response letter to indicate that the review cycle for an application is complete and that the application is not ready for approval. We are also revising the regulations on extending the review cycle due to the submission of an amendment to an unapproved application and starting a new review cycle after the resubmission of an application following receipt of a complete response letter. In addition, we are adding to the regulations on biologics license applications (BLAs) provisions on the issuance of complete response letters to BLA applicants. We are taking these actions to implement the user fee performance goals referenced in the Prescription Drug User Fee Amendments of 2002 (PDUFA III) that address procedures and establish target timeframes for reviewing human drug applications.

Irregular Applications: Architectures & Algorithms

Energy Technology Data Exchange (ETDEWEB)

Feo, John T.; Villa, Oreste; Tumeo, Antonino; Secchi, Simone

2012-02-06

Irregular applications are characterized by irregular data structures, control and communication patterns. Novel irregular high performance applications which deal with large data sets and require have recently appeared. Unfortunately, current high performance systems and software infrastructures executes irregular algorithms poorly. Only coordinated efforts by end user, area specialists and computer scientists that consider both the architecture and the software stack may be able to provide solutions to the challenges of modern irregular applications.

High resolution applications of laser-induced breakdown spectroscopy for environmental and forensic applications

International Nuclear Information System (INIS)

Martin, Madhavi Z.; Labbe, Nicole; Andre, Nicolas; Harris, Ronny; Ebinger, Michael; Wullschleger, Stan D.; Vass, Arpad A.

2007-01-01

Laser-induced breakdown spectroscopy (LIBS) has been used in the elemental analysis for a variety of environmental samples and as a proof of concept for a host of forensic applications. In the first application, LIBS was used for the rapid detection of carbon from a number of different soil types. In this application, a major breakthrough was achieved by using a multivariate analytical approach that has brought us closer towards a 'universal calibration curve'. In a second application, it has been demonstrated that LIBS in combination with multivariate analysis can be employed to analyze the chemical composition of annual tree growth rings and correlate them to external parameters such as changes in climate, forest fires, and disturbances involving human activity. The objectives of using this technology in fire scar determinations are: 1) To determine the characteristic spectra of wood exposed to forest fires and 2) To examine the viability of this technique for detecting fire occurrences in stems that did not develop fire scars. These examples demonstrate that LIBS-based techniques are inherently well suited for diverse environmental applications. LIBS was also applied to a variety of proof of concept forensic applications such as the analysis of cremains (human cremation remains) and elemental composition analysis of prosthetic implants

Development Application - Terra Nova Development - Development Application Summary

International Nuclear Information System (INIS)

1996-01-01

This summary is part of the application for approval of the development of the Terra Nova Field off the coast of Newfoundland, prepared and submitted by Petro-Canada, on behalf of, and with the cooperation of its co-proponents. The full application consists of five parts, comprising the development plan itself, the Canada-Newfoundland benefits plan detailing commitments with regards to contracts and employment, the environmental impact statement concerning the impact of development on the physical and biological environment, and a statement of socio-economic impacts, characterizing existing and projected impacts of the development on the fisheries, industry, employment, demography, social and public infrastructures and facilities, and socio-cultural issues

Neutron sources and applications

Energy Technology Data Exchange (ETDEWEB)

Price, D.L. [ed.] [Argonne National Lab., IL (United States); Rush, J.J. [ed.] [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

1994-01-01

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications.

Neutron sources and applications

International Nuclear Information System (INIS)

Price, D.L.; Rush, J.J.

1994-01-01

Review of Neutron Sources and Applications was held at Oak Brook, Illinois, during September 8--10, 1992. This review involved some 70 national and international experts in different areas of neutron research, sources, and applications. Separate working groups were asked to (1) review the current status of advanced research reactors and spallation sources; and (2) provide an update on scientific, technological, and medical applications, including neutron scattering research in a number of disciplines, isotope production, materials irradiation, and other important uses of neutron sources such as materials analysis and fundamental neutron physics. This report summarizes the findings and conclusions of the different working groups involved in the review, and contains some of the best current expertise on neutron sources and applications

49 CFR 1018.1 - Application.

Science.gov (United States)

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Application. 1018.1 Section 1018.1 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT OF TRANSPORTATION GENERAL RULES AND REGULATIONS DEBT COLLECTION Application and Coverage § 1018.1 Application. (a...

Finite mathematics models and applications

CERN Document Server

Morris, Carla C

2015-01-01

Features step-by-step examples based on actual data and connects fundamental mathematical modeling skills and decision making concepts to everyday applicability Featuring key linear programming, matrix, and probability concepts, Finite Mathematics: Models and Applications emphasizes cross-disciplinary applications that relate mathematics to everyday life. The book provides a unique combination of practical mathematical applications to illustrate the wide use of mathematics in fields ranging from business, economics, finance, management, operations research, and the life and social sciences.

Microprocessors principles and applications

CERN Document Server

Debenham, Michael J

1979-01-01

Microprocessors: Principles and Applications deals with the principles and applications of microprocessors and covers topics ranging from computer architecture and programmed machines to microprocessor programming, support systems and software, and system design. A number of microprocessor applications are considered, including data processing, process control, and telephone switching. This book is comprised of 10 chapters and begins with a historical overview of computers and computing, followed by a discussion on computer architecture and programmed machines, paying particular attention to t

Microcomputer interfacing and applications

CERN Document Server

Mustafa, M A

1990-01-01

This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

Applications of combinatorial optimization

CERN Document Server

Paschos, Vangelis Th

2013-01-01

Combinatorial optimization is a multidisciplinary scientific area, lying in the interface of three major scientific domains: mathematics, theoretical computer science and management. The three volumes of the Combinatorial Optimization series aims to cover a wide range of topics in this area. These topics also deal with fundamental notions and approaches as with several classical applications of combinatorial optimization. "Applications of Combinatorial Optimization" is presenting a certain number among the most common and well-known applications of Combinatorial Optimization.

REST based mobile applications

Science.gov (United States)

Rambow, Mark; Preuss, Thomas; Berdux, Jörg; Conrad, Marc

2008-02-01

Simplicity is the major advantage of REST based webservices. Whereas SOAP is widespread in complex, security sensitive business-to-business aplications, REST is widely used for mashups and end-user centric applicatons. In that context we give an overview of REST and compare it to SOAP. Furthermore we apply the GeoDrawing application as an example for REST based mobile applications and emphasize on pros and cons for the use of REST in mobile application scenarios.

Connected vehicle applications : safety.

Science.gov (United States)

2016-01-01

Connected vehicle safety applications are designed to increase situational awareness : and reduce or eliminate crashes through vehicle-to-infrastructure, vehicle-to-vehicle, : and vehicle-to-pedestrian data transmissions. Applications support advisor...

Adaptive Reactive Rich Internet Applications

Science.gov (United States)

Schmidt, Kay-Uwe; Stühmer, Roland; Dörflinger, Jörg; Rahmani, Tirdad; Thomas, Susan; Stojanovic, Ljiljana

Rich Internet Applications significantly raise the user experience compared with legacy page-based Web applications because of their highly responsive user interfaces. Although this is a tremendous advance, it does not solve the problem of the one-size-fits-all approach1 of current Web applications. So although Rich Internet Applications put the user in a position to interact seamlessly with the Web application, they do not adapt to the context in which the user is currently working. In this paper we address the on-the-fly personalization of Rich Internet Applications. We introduce the concept of ARRIAs: Adaptive Reactive Rich Internet Applications and elaborate on how they are able to adapt to the current working context the user is engaged in. An architecture for the ad hoc adaptation of Rich Internet Applications is presented as well as a holistic framework and tools for the realization of our on-the-fly personalization approach. We divided both the architecture and the framework into two levels: offline/design-time and online/run-time. For design-time we explain how to use ontologies in order to annotate Rich Internet Applications and how to use these annotations for conceptual Web usage mining. Furthermore, we describe how to create client-side executable rules from the semantic data mining results. We present our declarative lightweight rule language tailored to the needs of being executed directly on the client. Because of the event-driven nature of the user interfaces of Rich Internet Applications, we designed a lightweight rule language based on the event-condition-action paradigm.2 At run-time the interactions of a user are tracked directly on the client and in real-time a user model is built up. The user model then acts as input to and is evaluated by our client-side complex event processing and rule engine.

Technology and applications of broad-beam ion sources used in sputtering. Part II. Applications

International Nuclear Information System (INIS)

Harper, J.M.E.; Cuomo, J.J.; Kaufman, H.R.

1982-01-01

The developments in broad-beam ion source technology described in the companion paper (Part I) have stimulated a rapid expansion in applications to materials processing. These applications are reviewed here, beginning with a summary of sputtering mechanisms. Next, etching applications are described, including microfabrication and reactive ion beam etching. The developing area of surface layer applications is summarized, and related to the existing fields of oxidation and implantation. Next, deposition applications are reviewed, including ion-beam sputter deposition and the emerging technique of ion-assisted vapor deposition. Many of these applications have been stimulated by the development of high current ion sources operating in the energy range of tens of hundreds of eV. It is in this energy range that ion-activated chemical etching is efficient, self-limiting compound layers can be grown, and the physical properties of vapor-deposited films can be modified. In each of these areas, broad ion beam technology provides a link between other large area plasma processes and surface analytical techniques using ion beams

Secure Java For Web Application Development

CERN Document Server

Bhargav, Abhay

2010-01-01

As the Internet has evolved, so have the various vulnerabilities, which largely stem from the fact that developers are unaware of the importance of a robust application security program. This book aims to educate readers on application security and building secure web applications using the new Java Platform. The text details a secure web application development process from the risk assessment phase to the proof of concept phase. The authors detail such concepts as application risk assessment, secure SDLC, security compliance requirements, web application vulnerabilities and threats, security

Molecular imaging. Fundamentals and applications

International Nuclear Information System (INIS)

Tian, Jie

2013-01-01

Covers a wide range of new theory, new techniques and new applications. Contributed by many experts in China. The editor has obtained the National Science and Technology Progress Award twice. ''Molecular Imaging: Fundamentals and Applications'' is a comprehensive monograph which describes not only the theory of the underlying algorithms and key technologies but also introduces a prototype system and its applications, bringing together theory, technology and applications. By explaining the basic concepts and principles of molecular imaging, imaging techniques, as well as research and applications in detail, the book provides both detailed theoretical background information and technical methods for researchers working in medical imaging and the life sciences. Clinical doctors and graduate students will also benefit from this book.

48 CFR 1615.370 - Applicability.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Applicability. 1615.370 Section 1615.370 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES... Source Selection 1615.370 Applicability. FAR subpart 15.3 has no practical application to the FEHBP...

SU-F-T-25: Design and Implementation of a Multi-Purpose Applicator for Pelvic Brachytherapy Applications

Energy Technology Data Exchange (ETDEWEB)

Bogue, J; Parsai, E [University of Toledo Medical Center, Toledo, OH (United States)

2016-06-15

Purpose: The current generation of inflatable multichannel brachytherapy applicators, such as the Varian Capri, have limited implementation to only vaginal and rectal cancers. While there are similar designs utilizing rigid, non-inflatable applicators, these alternatives could cause increased dose to surrounding tissue due to air gaps. Modification of the Capri could allow for easier treatment planning by reducing the number of channels and increased versatility by modifying the applicator to include an attachable single tandem for cervical or multiple tandems for endometrial applications. Methods: A Varian Capri applicator was simulated in water to replicate a patient. Multiple plans were optimized to deliver a prescribed dose of 100 cGy at 5mm away from the exterior of the applicator using six to thirteen existing channels. The current model was expanded upon to include a detachable tandem or multiple tandoms to increase its functionality to both cervical and endometrial cancers. Models were constructed in both threedimensional rendering software and Monte Carlo to allow prototyping and simulations. Results: Treatment plans utilizing six to thirteen channels produced limited dosimetric differences between channel arrangements, with a seven channel plan very closely approximating the thirteen channels. It was concluded that only seven channels would be necessary in future simulations to give an accurate representation of the applicator. Tandem attachments were prototyped for the applicator to demonstrate the ease of which they could be included. Future simulation in treatment planning software and Monte Carlo results will be presented to further define the ideal applicator geometry Conclusion: The current Capri applicator design could be easily modified to increase applicability to include cervical and endometrial treatments in addition to vaginal and rectal cancers. This new design helps in a more versatile single use applicator that can easily be inserted and to

Applications of nonlinear fiber optics

CERN Document Server

Agrawal, Govind

2008-01-01

* The only book describing applications of nonlinear fiber optics * Two new chapters on the latest developments: highly nonlinear fibers and quantum applications* Coverage of biomedical applications* Problems provided at the end of each chapterThe development of new highly nonlinear fibers - referred to as microstructured fibers, holey fibers and photonic crystal fibers - is the next generation technology for all-optical signal processing and biomedical applications. This new edition has been thoroughly updated to incorporate these key technology developments.The bo

Applications of photovoltaics

International Nuclear Information System (INIS)

Pearsall, N.

1999-01-01

The author points out that although photovoltaics can be used for generating electricity for the same applications as many other means of generation, they really come into their own where disadvantages associated with an intermittent unpredictable supply are not severe. The paper discusses the advantages and disadvantages to be taken into account when considering a photovoltaic power system. Five main applications, based on the system features, are listed and explained. They are: consumer, professional, rural electrification, building-integrated, centralised grid connected and space power. A brief history of the applications of photovoltaics is presented with statistical data on the growth of installed capacity since 1992. The developing market for photovoltaics is discussed together with how environmental issues have become a driver for development of building-integrated photovoltaics

Improving Knowledge and Process for International Emergency Medicine Fellowship Applicants: A Call for a Uniform Application

Directory of Open Access Journals (Sweden)

Gabrielle A. Jacquet

2013-01-01

Full Text Available Background. There are currently 34 International Emergency Medicine (IEM fellowship programs. Applicants and programs are increasing in number and diversity. Without a standardized application, applicants have a difficulty approaching programs in an informed and an organized method; a streamlined application system is necessary. Objectives. To measure fellows’ knowledge of their programs’ curricula prior to starting fellowship and to determine what percent of fellows and program directors would support a universal application system. Methods. A focus group of program directors, recent, and current fellows convened to determine the most important features of an IEM fellowship application process. A survey was administered electronically to a convenience sample of 78 participants from 34 programs. Respondents included fellowship directors, fellows, and recent graduates. Results. Most fellows (70% did not know their program’s curriculum prior to starting fellowship. The majority of program directors and fellows support a uniform application service (81% and 67%, resp. and deadline (85% for both. A minority of program directors (35% and fellows (30% support a formal match. Conclusions. Program directors and fellows support a uniform application service and deadline, but not a formalized match. Forums for disseminating IEM fellowship information and for administering a uniform application service and deadline are currently in development to improve the process.

28 CFR 42.302 - Application.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Application. 42.302 Section 42.302... PROCEDURES Equal Employment Opportunity Program Guidelines § 42.302 Application. (a) Recipient means any... after either the promulgation of these amended guidelines, or the initial application for assistance is...

28 CFR 36.102 - Application.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Application. 36.102 Section 36.102... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES General § 36.102 Application. (a) General. This part applies to any... courses related to applications, licensing, certification, or credentialing for secondary or postsecondary...

34 CFR 691.12 - Application.

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Application. 691.12 Section 691.12 Education..., DEPARTMENT OF EDUCATION ACADEMIC COMPETITIVENESS GRANT (ACG) AND NATIONAL SCIENCE AND MATHEMATICS ACCESS TO RETAIN TALENT GRANT (NATIONAL SMART GRANT) PROGRAMS Application Procedures § 691.12 Application. (a) As...

Exploiting chaos for applications.

Science.gov (United States)

Ditto, William L; Sinha, Sudeshna

2015-09-01

We discuss how understanding the nature of chaotic dynamics allows us to control these systems. A controlled chaotic system can then serve as a versatile pattern generator that can be used for a range of application. Specifically, we will discuss the application of controlled chaos to the design of novel computational paradigms. Thus, we present an illustrative research arc, starting with ideas of control, based on the general understanding of chaos, moving over to applications that influence the course of building better devices.

Exploiting chaos for applications

Energy Technology Data Exchange (ETDEWEB)

Ditto, William L., E-mail: wditto@hawaii.edu [Department of Physics and Astronomy, University of Hawaii at Mānoa, Honolulu, Hawaii 96822 (United States); Sinha, Sudeshna, E-mail: sudeshna@iisermohali.ac.in [Indian Institute of Science Education and Research (IISER), Mohali, Knowledge City, Sector 81, SAS Nagar, PO Manauli 140306, Punjab (India)

2015-09-15

We discuss how understanding the nature of chaotic dynamics allows us to control these systems. A controlled chaotic system can then serve as a versatile pattern generator that can be used for a range of application. Specifically, we will discuss the application of controlled chaos to the design of novel computational paradigms. Thus, we present an illustrative research arc, starting with ideas of control, based on the general understanding of chaos, moving over to applications that influence the course of building better devices.

Refrigeration systems and applications

CERN Document Server

Dincer, Ibrahim

2010-01-01

Refrigeration Systems and Applications, 2nd edition offers a comprehensive treatise that addresses real-life technical and operational problems, enabling the reader to gain an understanding of the fundamental principles and the practical applications of refrigeration technology. New and unique analysis techniques (including exergy as a potential tool), models, correlations, procedures and applications are covered, and recent developments in the field are included - many of which are taken from the author's own research activities in this area. The book also includes so

Mobile applications and Virtual Observatory

Science.gov (United States)

Schaaff, A.; Jagade, S.

2015-06-01

Within a few years, smartphones and Internet tablets have become the devices to access Web or standalone applications from everywhere, with a rapid development of the bandwidth of the mobile networks (e.g. 4G). Internet tablets are used to take notes during meetings or conferences, to read scientific papers in public transportation, etc. A smartphone is for example a way to have your data in the pocket or to control, from everywhere, the progress of a heavy workflow process. These mobile devices have enough powerful hardware to run more and more complex applications for many use cases. In the field of astronomy it is possible to use these tools to access data via a simple browser, but also to develop native applications reusing libraries (written in Java for Android or Objective-C/Swift for iOS) developed for desktops/laptops. We describe the experiments conducted in this domain, at CDS and IUCAA, considering a mobile application as a native application as well as a Web application.

Report of promotion expert commission for radiation application on 'Promotion of accelerator application study'

International Nuclear Information System (INIS)

1997-01-01

This is a report published on June, 1996, by promotion expert commission for radiation application of the Atomic Energy Commission. Japanese research and development in the fields of forming and application techniques of radiation beams using accelerator is at comparatively high level in the world, and it seems to be important for Japan not only to maintain these research and development level but also to contribute to creation of worldwide intelligent welfare due to scientific technology. In this report, some investigations are conducted on present state and future view of the radiation application study using accelerator, accelerator facility necessary to promote such application study and a procedure to execute its smooth application. However, objects of the study are not limited only for physical study on elementary particle and atomic nucleus, but expanded to photon, electron, positron, muon, proton, neutron, various inonic beams and RI beams for radiations, which are widely applied to industries such as materials science, material engineering, bio-and life-science, medical science, technical engineering, and so forth, and which will be expected for large contribution to development of these industries. The following items are discussed here; 1) present state and future view of radiation application study using accelerator, 2) Accelerator to be prepared and its executing method, and 3) Promotion method of the accelerator application study. (G.K.)

Veterinary School Applicants: Financial Literacy and Behaviors.

Science.gov (United States)

Carr, McKensie M; Greenhill, Lisa M

2015-01-01

Each year the Association of American Veterinary Medical Colleges (AAVMC) conducts a survey after the close of the Veterinary Medical College Application Service (VMCAS) application. The survey provides a glimpse into applicant behavior surrounding the veterinary school application process. Additional survey questions probe into applicant financial behaviors, use of financial products and services, and pet ownership. This article examines the 2013 survey data from applicants who successfully completed the application, with a focus on applicant financial literacy and behaviors. Data from the study revealed a disconnect between applicants' perception of their ability to deal with day-to-day finances and their actual financial behaviors, particularly for first-generation college student applicants and applicants who are racially/ethnically underrepresented in veterinary medicine (URVM). Many applicants were not able to accurately report the average veterinary school graduate's student debt level, which suggests the potential need for better education about the costs associated with attending veterinary school.

Nanobiomaterials development and applications

CERN Document Server

Papaefthymiou-Davis, Georgia C

2013-01-01

Nanomaterials in Nanobiotechnologies: Preparation, Characterization, and ApplicationsBio-Inspired Magnetic NanoparticlesGeorgia C. Papaefthymiou and Eamonn DevlinNanoparticles for BioimagingHye Sun Park and Yong Taik LimBiomedical Applications of Dendrimer Porphyrin or PhthalocyanineWoo-Dong Jang and Won-Gun KohPolymeric Nanoparticles in Cancer TherapyHeebeom Koo, Ji Young Yhee, Ick Chan Kwon, Kwangmeyung Kim, and Ramesh SubbiahCarbon Nanotube BioconjugatesMonica Samal, Dong Kee Yi, and Shashadhar SamalBiocatalytic NanosystemsJaehong Lim and Su Seong LeeMagnetically Induced Hyperthermia for Biomedical ApplicationsMichael Fardis, Ioannis Rabias, Georgios Diamantopoulos, Eleni Karakosta, Danai Tsitrouli, Vassilios Tzitzios, and Georgios PapavassiliouSoft Block Nanobuilding: New Preparation Routes of Soft Nanomaterials Using BiomoleculesEngineered Biomolecules as NanomaterialsYun Jung Lee and Ki Tae NamNanomaterials and Bio-MEMS: Nano- and Microscale Hybridization of Materials and ApplicationsMicrofluidic-Based ...

PRA insights applicable to the design of a broad applications test reactor

International Nuclear Information System (INIS)

Khericha, S.T.; Reilly, H.J.

1993-01-01

Design insights applicable to the design of a new Broad Applications Test Reactor (BATR), studied during Fiscal Years 1992 an d1993 at Idaho National Engineering Laboratory (INEL), are summarized. Sources of design insights include past probabilistic risk assessments (PRAs) and related studies for Department of Energy (DOE)-owned Class A reactors and for commercial reactors. The report includes preliminary risk allocations for the BATR. The survey addressed those design insights that would affect the reactor core damage frequency (CDF). The design insights, while selected specifically for BATR, should be applicable to any new advanced test reactor

8 CFR 245.2 - Application.

Science.gov (United States)

2010-01-01

... ADMITTED FOR PERMANENT RESIDENCE § 245.2 Application. (a) General—(1) Jurisdiction. USCIS has jurisdiction... on Form I-485, Application for Permanent Residence. The application must be accompanied by the..., deportation, or removal proceeding and who is in lawful V status shall not be deemed an abandonment of the...

18 CFR 284.501 - Applicability.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Applicability. 284.501 Section 284.501 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT... Applications for Market-Based Rates for Storage § 284.501 Applicability. Any pipeline or storage service...

23 CFR 1200.10 - Application.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Application. 1200.10 Section 1200.10 Highways NATIONAL... PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS UNIFORM PROCEDURES FOR STATE HIGHWAY SAFETY PROGRAMS Application, Approval, and Funding of the Highway Safety Program § 1200.10 Application. Each fiscal year, a State's...

48 CFR 225.502 - Application.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Application. 225.502....502 Application. (b) Use the following procedures instead of the procedures in FAR 25.502(b) for... of Payments Program, then only qualifying country end products are exempt from application of the Buy...

Application coordination in pervasive systems

CERN Document Server

Majuntke, Verena Elisabeth

2013-01-01

Pervasive applications are designed to support users in their daily life. For this purpose, applications interact with their environment, i.e. their context. They are able to adapt themselves to context changes or to explicitly change the context via actuators. If multiple applications are executed in the same context, interferences are likely to occur. To manage interferences, a coordination framework is presented in this thesis. Interferences are detected using a context model and information about applications' interaction with the context. The resolution of interference is achieved through

Designing and Programming CICS Applications

CERN Document Server

Horswill, John

2011-01-01

CICS is an application server that delivers industrial-strength, online transaction management for critical enterprise applications. Proven in the market for over 30 years with many of the world's leading businesses, CICS enables today's customers to modernize and extend their applications to take advantage of the opportunities provided by e-business while maximizing the benefits of their existing investments. Designing and Programming CICS Applications will benefit a diverse audience. It introduces new users of IBM's mainframe (OS/390) to CICS features. It shows experienced users how t

Basics and application of PSpice

International Nuclear Information System (INIS)

Choi, Pyeong; Cho, Yong Beom; Mok, Hyeong Su; Baek, Dong CHeol

2006-03-01

This book is comprised of nineteenth chapters, which introduces basics and application of PSpice. The contents of this book are PSpice?, PSpice introduction, PSpice simulation, DC analysis, parametric analysis, Transient analysis, parametric analysis and measurements, Monte Carlo analysis, changing of device characteristic, ABM application. The elementary laws of circuit, R.L.C. basic circuit, Diode basic cc circuit, Transistor and EET basic circuit, OP-Amp basic circuit, Digital basic circuit, Analog, digital circuit practice, digital circuit application and practice and ABM circuit application and practice.

Track formation. Principles and applications

International Nuclear Information System (INIS)

Monnin, M.

1978-01-01

The principles and technical aspects of track formation in insulating solids are first described. The characteristics of dialectic track detection are discussed from the technical point of view: the nature of the detectors, the chemical treatment, the sensitivity and the environmental conditions of use. The applications are reviewed. The principle of each type of applied research is described and then the applications are listed. When used as a detector, nuclear tracks can provide valuable information in a number of fields: element content determination and wrapping, imaging, radiation dosimetry, environmental studies, technological uses and miscellaneous other applications. The track-formation process can also be used for making well-defined holes; this method allows other applications which are also described. Finally, some possible future applications are mentioned. (author)

30 CFR 7.83 - Application requirements.

Science.gov (United States)

2010-07-01

...) Injector nozzle; (9) Injection fuel pump; (10) Governor; (11) Turbocharger, if applicable; (12) Aftercooler... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Diesel Engines Intended for Use in Underground Coal Mines § 7.83 Application requirements. (a) An application for approval of a diesel engine...

Express web application development

CERN Document Server

Yaapa, Hage

2013-01-01

Express Web Application Development is a practical introduction to learning about Express. Each chapter introduces you to a different area of Express, using screenshots and examples to get you up and running as quickly as possible.If you are looking to use Express to build your next web application, ""Express Web Application Development"" will help you get started and take you right through to Express' advanced features. You will need to have an intermediate knowledge of JavaScript to get the most out of this book.

Mobile Application Recommender System

OpenAIRE

Davidsson, Christoffer

2010-01-01

With the amount of mobile applications available increasing rapidly, users have to put a lot of effort into finding applications of interest. The purpose of this thesis is to investigate how to aid users in the process of discovering new mobile applications by providing them with recommendations. A prototype system is then built as a proof-of-concept. The work of the thesis is divided into three phases where the aim of the first phase is to study related work and related systems to identify p...

Sensors Applications, Volume 4, Sensors for Automotive Applications

Science.gov (United States)

Marek, Jiri; Trah, Hans-Peter; Suzuki, Yasutoshi; Yokomori, Iwao

2003-07-01

An international team of experts from the leading companies in this field gives a detailed picture of existing as well as future applications. They discuss in detail current technologies, design and construction concepts, market considerations and commercial developments. Topics covered include vehicle safety, fuel consumption, air conditioning, emergency control, traffic control systems, and electronic guidance using radar and video. Meeting the growing need for comprehensive information on the capabilities, potentials and limitations of modern sensor systems, Sensors Applications is a book series covering the use of sophisticated technologies and materials for the creation of advanced sensors and their implementation in the key areas process monitoring, building control, health care, automobiles, aerospace, environmental technology and household appliances.

76 FR 50997 - Application(s) for Duty-Free Entry of Scientific Instruments

Science.gov (United States)

2011-08-17

... DEPARTMENT OF COMMERCE International Trade Administration Application(s) for Duty-Free Entry of..., School of Earth Sciences, 275 Mendenhall Laboratory, 125 South Oval Mall, Columbus, OH 43210. Instrument... and high-contrast images, a stage that is easy to move, a focus that does not change with changing...

28 CFR 18.2 - Application.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Application. 18.2 Section 18.2 Judicial Administration DEPARTMENT OF JUSTICE OFFICE OF JUSTICE PROGRAMS HEARING AND APPEAL PROCEDURES § 18.2 Application. (a) These procedures apply to all appeals and hearings of State formula or block grant applicants or...

76 FR 78628 - Copper Valley Electric Association, Inc.; Notice of Application and Applicant-Prepared EA...

Science.gov (United States)

2011-12-19

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 13124-003] Copper Valley... Application: Major License. b. Project No.: P-13124-003. c. Date filed: August 30, 2011. d. Applicant: Copper.... 791 (a)-825(r). h. Applicant Contact: Robert A. Wilkinson, CEO, Copper Valley Electric Association...

Magnesium motorcycle applications

International Nuclear Information System (INIS)

Jianyong Cao; Zonghe Zhang; Dongxia Xiang; Jun Wang

2005-01-01

Magnesium, the lightest engineering structural metal, has been comprehensively used in castings of aviation and aerospace, communication and transportation, and IT components. This paper introduced the history, advantages and difficulties of magnesium castings for motorcycle application as well as its application state in China. It also indicated the production situation of magnesium motorcycle components in CQMST and difficulties need to overcome for further development. (orig.)

Technological laser application

International Nuclear Information System (INIS)

Shia, D.O.; Kollen, R.; Rods, U.

1980-01-01

Problems of the technological applications of lasers are stated in the popular form. Main requirements to a technological laser as well as problems arising in designing any system using lasers have been considered. Areas of the laser applications are described generally: laser treatment of materials, thermal treatment, welding, broach and drilling of holes, scribing, microtreatment and adjustment of resistors, material cutting, investigations into controlled thermonuclear fussion

Instrumentation for Applied Physics and Industrial Applications: Applications of Detectors in Technology, Medicine and Other Fields

CERN Document Server

Hillemanns, H

2011-01-01

Instrumentation for Applied Physics and Industrial Applications in 'Applications of Detectors in Technology, Medicine and Other Fields', part of 'Landolt-Börnstein - Group I Elementary Particles, Nuclei and Atoms: Numerical Data and Functional Relationships in Science and Technology, Volume 21B2: Detectors for Particles and Radiation. Part 2: Systems and Applications'. This document is part of Part 2 'Principles and Methods' of Subvolume B 'Detectors for Particles and Radiation' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Section '7.3 Instrumentation for Applied Physics and Industrial Applications' of Chapter '7 Applications of Detectors in Technology; Medicine and Other Fields' with the content: 7.3 Instrumentation for Applied Physics and Industrial Applications 7.3.1 Applications of HEP Detectors 7.3.2 Fast Micro- and Nanoelectronics for Particle Detector Readout 7.3.2.1 Fast Counting Mode Front End Electronics 7.3.2.2 NINO,...

7 CFR 764.51 - Loan application.

Science.gov (United States)

2010-01-01

... to make a determination on the loan application. (e) The applicant need not submit any information... ordering a credit report on the applicant; (12) Verification of all debts; (13) Any additional information...-Doc OL request, the applicant must: (1) Be current on all payments to all creditors including the...

Applications of Nano-optics.

Science.gov (United States)

Zhou, Changhe; Fainman, Yeshaiahu; Sheng, Yunlong

2011-11-01

As nanoscale fabrication techniques advance, nano-optics continues to offer enabling solutions to numerous practical applications for information optics. This Applied Optics feature issue focuses on the Application of Nano-optics. © 2011 Optical Society of America

Active and passive beam application design guide for global application

CERN Document Server

Rimmer, Julian

2015-01-01

The Active and Passive Beam Application Design Guide is the result of collaboration by worldwide experts to give system designers a current, authoritative guide on successfully applying active and passive beam technology. Active and Passive Beam Application Design Guide provide energy-efficient methods of cooling, heating, and ventilating indoor areas, especially spaces that require individual zone control and where internal moisture loads are moderate. The systems are simple to operate, with low maintenance requirements. This book is an essential resource for consulting engineers, architects, owners, and contractors who are involved in the design, operation, and installation of these systems. Building on REHVA’s Chilled Beam Application Guidebook, this new guide provides up-to-date tools and advice for designing, commissioning, and operating chilled-beam systems to achieve a determined indoor climate, and includes examples of active and passive beam calculations and selections. Dual units (SI and I-P) are...

Realization of an accelerator for environmental refreshment in case of soil; Fukyugata kasokuki ni yoru kankyo sosei eno koka

Energy Technology Data Exchange (ETDEWEB)

Isogai, H [Electrotechnical Laboratory, Tsukuba (Japan)

1997-11-25

Learning from a history of the earth of ancient times, the paper studies effects of refreshing environment and soil or making them natural and harmless mostly using primitive bacteria, and develops element technology which is industrially accelerating. The spread type accelerator working only by solar energy was installed and operated for experiment. As indices of refreshment effects, a study was comparatively made between a sugar degree of sweet potato and a yield shown in the number of potatotimesunit weight. An EM propagation garbage layer is formed, and the two sections were installed of a site of the actual installation of the spread type accelerator and a site naturally left alone. Other effects of weather, temperature and humidity which are external factors and general fertilization are offset as common modes, and a consideration was so made that only refreshment effects of primitive bacteria can be relatively compared. Acceleration effects in using accelerator for growing sweet potato could be quantitatively confirmed. As to sugar degree, because the last study was made in the beginning of summer, the underground temperature was high enough. Even only EM effects were fully effective. This time, the weather was much colder, and it was found to be a must to use accelerator. 2 figs.

Education effect of solar car for technical high school student; Kogyo kokosei ni taisuru solar car no kyoiku koka

Energy Technology Data Exchange (ETDEWEB)

Inoue, T.

1998-09-30

The solar car race which technical high school students can join in was determined to be held at Ogata village, Akita prefecture. To join in the solar bicycle race, the author working in Ofuna technical high school called on 3 schools of Yokosuka, Fujisawa and Kanagawa technical high schools which joined in World Solar-Car Rally in Akita (WSR) in 1997, before fabrication of a racing bicycle. This paper describes the survey results at the above technical high schools, and the spirit as the teacher of Ofuna technical high school on joining in the race and fabrication of the solar bicycle, and the past, current and future situations. Club activities of high school students incline too toward sports such as soccer, baseball, volleyball and rugby, and are apt to keep honest cultural events and technical events at a distance. The author says that the challenge spirit to the solar car race using environment-friendly solar energy by both dedicated teachers and students of technical high schools summoned up the author`s courage. 15 figs.

Designing scientific applications on GPUs

CERN Document Server

Couturier, Raphael

2013-01-01

Many of today's complex scientific applications now require a vast amount of computational power. General purpose graphics processing units (GPGPUs) enable researchers in a variety of fields to benefit from the computational power of all the cores available inside graphics cards.Understand the Benefits of Using GPUs for Many Scientific ApplicationsDesigning Scientific Applications on GPUs shows you how to use GPUs for applications in diverse scientific fields, from physics and mathematics to computer science. The book explains the methods necessary for designing or porting your scientific appl

The mobile application hacker's handbook

CERN Document Server

Chell, Dominic; Colley, Shaun; Whitehouse, Ollie

2015-01-01

See your app through a hacker's eyes to find the real sources of vulnerability The Mobile Application Hacker's Handbook is a comprehensive guide to securing all mobile applications by approaching the issue from a hacker's point of view. Heavily practical, this book provides expert guidance toward discovering and exploiting flaws in mobile applications on the iOS, Android, Blackberry, and Windows Phone platforms. You will learn a proven methodology for approaching mobile application assessments, and the techniques used to prevent, disrupt, and remediate the various types of attacks. Coverage i

NASA technology applications team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

This report covers the activities of the Research Triangle Institute (RTI) Technology Applications Team for the period 1 October 1992 through 30 September 1993. The work reported herein was supported by the National Aeronautics and Space Administration (NASA), Contract No. NASW-4367. Highlights of the RTI Applications Team activities over the past year are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. Appendix B includes Technology Opportunity Announcements and Spinoff! Sheets prepared by the Team while Appendix C contains a series of technology transfer articles prepared by the Team.

7 CFR 1610.4 - Loan applications.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture (Continued) RURAL TELEPHONE BANK, DEPARTMENT OF AGRICULTURE LOAN POLICIES § 1610.4 Loan applications. No application for a loan will be considered for approval by the Bank... of the applicant for a Bank loan and the amount thereof. Loan application forms are available from...

50 CFR 85.21 - Application procedures.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Application procedures. 85.21 Section 85... Application for Grants § 85.21 Application procedures. (a) Eligible applicants will submit their proposals to..., Missouri, Ohio, and Wisconsin Division of Federal Aid, U.S. Fish and Wildlife Service, Bishop Henry Whipple...

8 CFR 1245.2 - Application.

Science.gov (United States)

2010-01-01

... ADJUSTMENT OF STATUS TO THAT OF PERSON ADMITTED FOR PERMANENT RESIDENCE § 1245.2 Application. (a) General—(1... Residence. The application must be accompanied by the appropriate fee as explained in the instructions to... in lawful V status shall not be deemed an abandonment of the application if, upon returning to this...

43 CFR 3.5 - Application.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Application. 3.5 Section 3.5 Public Lands: Interior Office of the Secretary of the Interior PRESERVATION OF AMERICAN ANTIQUITIES § 3.5 Application. Each application for a permit should be filed with the Secretary having jurisdiction, and must be...

14 CFR 298.50 - Application.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Application. 298.50 Section 298.50... § 298.50 Application. (a) Any person desiring to provide air transportation as a commuter air carrier... Department— (1) An application in accordance with the requirements of parts 201 and 302 of this chapter; (2...

Engineering Web Applications

DEFF Research Database (Denmark)

Casteleyn, Sven; Daniel, Florian; Dolog, Peter

Nowadays, Web applications are almost omnipresent. The Web has become a platform not only for information delivery, but also for eCommerce systems, social networks, mobile services, and distributed learning environments. Engineering Web applications involves many intrinsic challenges due...... to their distributed nature, content orientation, and the requirement to make them available to a wide spectrum of users who are unknown in advance. The authors discuss these challenges in the context of well-established engineering processes, covering the whole product lifecycle from requirements engineering through...... design and implementation to deployment and maintenance. They stress the importance of models in Web application development, and they compare well-known Web-specific development processes like WebML, WSDM and OOHDM to traditional software development approaches like the waterfall model and the spiral...

Connected vehicle application : safety.

Science.gov (United States)

2015-01-01

Connected vehicle safety applications are designed to increase situational awareness : and reduce or eliminate crashes through vehicle-to-infrastructure (V2I), vehicle-to-vehicle (V2V), and vehicle-to-pedestrian (V2P) data transmissions. Applications...

Evolution of Mobile Applications

Directory of Open Access Journals (Sweden)

Phongtraychack Anachack

2018-01-01

Full Text Available Currently, we can see the rapid evolution of mobile technology, which involves mobile communication, mobile hardware, and mobile software. Features of mobile phones largely depend on software. In contemporary information and communication age [1–4], mobile application is one of the most concerned and rapidly developing areas. At the same time, the development of mobile application undergoes great changes with the introduction of new software, service platforms and software development kits (SDK. These changes lead to appearance of many new service platforms such as Google with Android and Apple with iOS. This article presents the information about the evolution of mobile application, gives some statistical data on the past and present situation, demonstrates how individual users of mobile devices can benefit, and shows how mobile applications affect society from the ethical perspective.

Designing Adaptive Web Applications

DEFF Research Database (Denmark)

Dolog, Peter

2008-01-01

Learning system to study a discipline. In business to business interaction, different requirements and parameters of exchanged business requests might be served by different services from third parties. Such applications require certain intelligence and a slightly different approach to design. Adpative web......The unique characteristic of web applications is that they are supposed to be used by much bigger and diverse set of users and stakeholders. An example application area is e-Learning or business to business interaction. In eLearning environment, various users with different background use the e......-based applications aim to leave some of their features at the design stage in the form of variables which are dependent on several criteria. The resolution of the variables is called adaptation and can be seen from two perspectives: adaptation by humans to the changed requirements of stakeholders and dynamic system...

Engineering Adaptive Web Applications

DEFF Research Database (Denmark)

Dolog, Peter

2007-01-01

suit the user profile the most. This paper summarizes the domain engineering framework for such adaptive web applications. The framework provides guidelines to develop adaptive web applications as members of a family. It suggests how to utilize the design artifacts as knowledge which can be used......Information and services on the web are accessible for everyone. Users of the web differ in their background, culture, political and social environment, interests and so on. Ambient intelligence was envisioned as a concept for systems which are able to adapt to user actions and needs....... With the growing amount of information and services, the web applications become natural candidates to adopt the concepts of ambient intelligence. Such applications can deal with divers user intentions and actions based on the user profile and can suggest the combination of information content and services which...

Food Applications and Regulation

Science.gov (United States)

Gálvez, Antonio; Abriouel, Hikmate; Omar, Nabil Ben; Lucas, Rosario

This chapter deals with food applications of bacteriocins. Regulatory issues on the different possibilities for incorporating bacteriocins as bioprotectants are discussed. Specific applications of bacteriocins or bacteriocin-producing strains are described for main food categories, including milk and dairy products, raw meats, ready-to-eat meat and poultry products, fermented meats, fish and fish products or fermented fish. The last section of the chapter deals with applications in foods and beverages derived from plant materials, such as raw vegetable foods, fruits and fruit juices, cooked food products, fermented vegetable foods and ­fermented beverages. Results obtained for application of bacteriocins in combination with other hurdles are also discussed for each specific case, with a special emphasis on novel food packaging and food-processing technologies, such as irradiation, pulsed electric field treatments or high hydrostatic pressure treatment.

Printing Technologies for Medical Applications.

Science.gov (United States)

Shafiee, Ashkan; Atala, Anthony

2016-03-01

Over the past 15 years, printers have been increasingly utilized for biomedical applications in various areas of medicine and tissue engineering. This review discusses the current and future applications of 3D bioprinting. Several 3D printing tools with broad applications from surgical planning to 3D models are being created, such as liver replicas and intermediate splints. Numerous researchers are exploring this technique to pattern cells or fabricate several different tissues and organs, such as blood vessels or cardiac patches. Current investigations in bioprinting applications are yielding further advances. As one of the fastest areas of industry expansion, 3D additive manufacturing will change techniques across biomedical applications, from research and testing models to surgical planning, device manufacturing, and tissue or organ replacement. Copyright © 2016. Published by Elsevier Ltd.

Studies on deaf mobile application

Science.gov (United States)

Nathan, Shelena Soosay; Hussain, Azham; Hashim, Nor Laily

2016-08-01

The deaf normally considered to be disabled that do not need any mobile technology due to the inabilities of hearing and talking. However, many deaf are using mobile phone in their daily life for various purposes such as communication and learning. Many studies have attempted to identify the need of deaf people in mobile application and level of usage of the applications. This study aims in studying the recent research conducted on deaf mobile application to understand the level of importance of mobile technology for this disabled community. This paper enable identification of studies conducted are limited and the need of more research done of this disabled people to ensure their privilege of using mobile technology and its application, which leads to the identification of deaf user requirement for mobile application as future study.

From initial application to routine operation: Reviewing the Applications for Power Uprates

International Nuclear Information System (INIS)

Garis, Ninos; Skaanberg, Lars

2007-01-01

Current plans for power uprates in Swedish nuclear power plants will lead to significant increases in seven units and a lesser increase in one unit. To date SKI has received six applications, and two more are due in 2007. A power uprate process is initiated by the application to the Government by a licensee for approval to increase the thermal output of a reactor unit. This request is addressed to the Government and is forwarded to SKI for a preliminary safety review. The result of the review is then provided by SKI as a basis for a governmental decision. Six applications have been taken through the first stage of the process; of these, three have received governmental approval and three are currently awaiting a decision. If the licensee's application is approved by the Government, deeper analyses and studies are required in order to modify the plant and update the safety analysis report and the associated technical specifications. SKI reviews this material on a continuous basis prior to test and routine operation at the increased power level. There are four stages that require attention and review by SKI; 1. Review of the application to the Government for approval to operate at increased power levels, and preparation of a suitable answer. 2. Review and approval of the preliminary safety analysis report (PSAR) 3. Review and approval of the application for testing at the higher power level 4. Review and approval of routine operation at the higher power level. A thorough description of the handling of a power uprate process can be found in the SKI PM (SKI-PM 04:11) that is available on the SKI website (in Swedish)

Biomedical applications of polymers

CERN Document Server

Gebelein, C G

1991-01-01

The biomedical applications of polymers span an extremely wide spectrum of uses, including artificial organs, skin and soft tissue replacements, orthopaedic applications, dental applications, and controlled release of medications. No single, short review can possibly cover all these items in detail, and dozens of books andhundreds of reviews exist on biomedical polymers. Only a few relatively recent examples will be cited here;additional reviews are listed under most of the major topics in this book. We will consider each of the majorclassifications of biomedical polymers to some extent, inclu

Professional Cocoa Application Security

CERN Document Server

Lee, Graham J

2010-01-01

The first comprehensive security resource for Mac and iPhone developers. The Mac platform is legendary for security, but consequently, Apple developers have little appropriate security information available to help them assure that their applications are equally secure. This Wrox guide provides the first comprehensive go-to resource for Apple developers on the available frameworks and features that support secure application development.: While Macs are noted for security, developers still need to design applications for the Mac and the iPhone with security in mind; this guide offers the first

Superconductivity and its application

International Nuclear Information System (INIS)

Spadoni, M.

1988-01-01

This paper, after a short introduction to superconductivity and to multifilamentary superconducting composites is aiming to review the state of the art and the future perspective of some of the applications of the superconducting materials. The main interest is focussed to large scale applications like, for istance, magnets for accelerators or fusion reactors, superconducting system for NMR thomography, etc. A short paragraph is dedicated to applications for high sensitivity instrumentation. The paper is then concluded by some considerations about the potentialities of the newly discovered high critical temperature materials

Professional Tizen application development

CERN Document Server

Jaygarl, HoJun; Kim, YoonSoo; Choi, Eunyoung; Bradwick, Kevin; Lansdell

2014-01-01

Create powerful, marketable applications with Tizen for the smartphone and beyond  Tizen is the only platform designed for multiple device categories that is HTML5-centric and entirely open source. Written by experts in the field, this comprehensive guide includes chapters on both web and native application development, covering subjects such as location and social features, advanced UIs, animations, sensors and multimedia. This book is a comprehensive resource for learning how to develop Tizen web and native applications that are polished, bug-free and ready to sell on a range of smart dev

Developing Large Web Applications

CERN Document Server

Loudon, Kyle

2010-01-01

How do you create a mission-critical site that provides exceptional performance while remaining flexible, adaptable, and reliable 24/7? Written by the manager of a UI group at Yahoo!, Developing Large Web Applications offers practical steps for building rock-solid applications that remain effective even as you add features, functions, and users. You'll learn how to develop large web applications with the extreme precision required for other types of software. Avoid common coding and maintenance headaches as small websites add more pages, more code, and more programmersGet comprehensive soluti

Professional mobile application development

CERN Document Server

McWherter, Jeff

2012-01-01

Create applications for all major smartphone platforms Creating applications for the myriad versions and varieties of mobile phone platforms on the market can be daunting to even the most seasoned developer. This authoritative guide is written in such as way that it takes your existing skills and experience and uses that background as a solid foundation for developing applications that cross over between platforms, thereby freeing you from having to learn a new platform from scratch each time. Concise explanations walk you through the tools and patterns for developing for all the mobile platfo

25 CFR 75.9 - Application form.

Science.gov (United States)

2010-04-01

... applicant. If the application is filed on behalf of a minor, the name and address of the person filing the application and his relationship to the minor. (b) The name, relationship, tribe and roll number of the ancestor or ancestors through whom enrollment rights are claimed, and whether applicant is enrolled with...

Applications of artificial intelligence to rotorcraft

Science.gov (United States)

Abbott, Kathy H.

1987-01-01

The application of AI technology may have significant potential payoff for rotorcraft. In the near term, the status of the technology will limit its applicability to decision aids rather than total automation. The specific application areas are categorized into onboard and nonflight aids. The onboard applications include: fault monitoring, diagnosis, and reconfiguration; mission and tactics planning; situation assessment; navigation aids, especially in nap-of-the-earth flight; and adaptive man-machine interfaces. The nonflight applications include training and maintenance diagnostics.

Retrieval operators of remote sensing applications

International Nuclear Information System (INIS)

Ahmad, T.; Shah, A.

2014-01-01

A set of operators of remote sensing applications have been proposed to fulfill most of the Functional Requirements (FR). These operators capture the functions of the applications, which can be considered as the services provided by the applications. In general, a good application meets maximum FR from user. In this paper, we have defined a remote sensing application by a set, having all images created at dissimilar time instances, and each image is categorized into set of different layers. (author)

Dosimetry of Sr-90 ophthalmic applicators

International Nuclear Information System (INIS)

Reft, C.S.; Kuchnir, F.T.; Rosenberg, I.; Myrianthopoulos, L.C.

1990-01-01

Sr-90 ophthalmic applicators are commonly used for the treatment of superficial eye disorders. Although a variety of dosimetric devices such as film, thermoluminescent dosimeters (TLD's), ion chambers, and radiochromic foils have been used to measure the peak dose at the applicator surface, there is no internationally agreed upon calibration procedure. Recently, large discrepancies among calibrations of the same applicator at three institutions have been reported. Here we describe a technique to obtain the peak dose rate at the applicator surface using LiF TLD's. The technique can be used for the calibration of flat as well as curved surface applicators. Results for two flat and three concave applicators are presented. Our measurement of the surface dose rate for one of the flat applicators is compared with those obtained by four other institutions, each using different dosimetric devices

15 CFR 315.3 - Application.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Application. 315.3 Section 315.3...-VEHICLE MANUFACTURER § 315.3 Application. Any person in the United States desiring to be determined a bona... in accordance with the instructions set forth on the form and this part. Application forms may be...

21 CFR 808.20 - Application.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Application. 808.20 Section 808.20 Food and Drugs....20 Application. (a) Any State or political subdivision may apply to the Food and Drug Administration... effect of law. However, an application for exemption may be submitted before the effective date of the...

Energy applications of superconductivity

International Nuclear Information System (INIS)

Schneider, T.R.; Dale, S.J.; Wolf, S.M.

1991-01-01

Recent progress in developing high-temperature superconductors has enhanced the economic viability of energy applications such as power systems, motors, material processing and handling, refrigeration, transportation, and power electronics. This paper discusses the technical and economic issues associated with these applications

Accounting Applications---Introduction

OpenAIRE

Joshua Ronen

1980-01-01

Introduction to special issue on accounting applications. By publishing these papers together in one issue of Management Science we wish to accomplish the dual purpose of exposing management scientists to the application of their discipline to important accounting problems and of allowing management scientists and accountants to interact in areas of research and problem-solving, thus stimulating the interest of readers who are concerned with the problems of accounting.

Opal web services for biomedical applications.

Science.gov (United States)

Ren, Jingyuan; Williams, Nadya; Clementi, Luca; Krishnan, Sriram; Li, Wilfred W

2010-07-01

Biomedical applications have become increasingly complex, and they often require large-scale high-performance computing resources with a large number of processors and memory. The complexity of application deployment and the advances in cluster, grid and cloud computing require new modes of support for biomedical research. Scientific Software as a Service (sSaaS) enables scalable and transparent access to biomedical applications through simple standards-based Web interfaces. Towards this end, we built a production web server (http://ws.nbcr.net) in August 2007 to support the bioinformatics application called MEME. The server has grown since to include docking analysis with AutoDock and AutoDock Vina, electrostatic calculations using PDB2PQR and APBS, and off-target analysis using SMAP. All the applications on the servers are powered by Opal, a toolkit that allows users to wrap scientific applications easily as web services without any modification to the scientific codes, by writing simple XML configuration files. Opal allows both web forms-based access and programmatic access of all our applications. The Opal toolkit currently supports SOAP-based Web service access to a number of popular applications from the National Biomedical Computation Resource (NBCR) and affiliated collaborative and service projects. In addition, Opal's programmatic access capability allows our applications to be accessed through many workflow tools, including Vision, Kepler, Nimrod/K and VisTrails. From mid-August 2007 to the end of 2009, we have successfully executed 239,814 jobs. The number of successfully executed jobs more than doubled from 205 to 411 per day between 2008 and 2009. The Opal-enabled service model is useful for a wide range of applications. It provides for interoperation with other applications with Web Service interfaces, and allows application developers to focus on the scientific tool and workflow development. Web server availability: http://ws.nbcr.net.

Automated Inadvertent Intruder Application

International Nuclear Information System (INIS)

Koffman, Larry D.; Lee, Patricia L.; Cook, James R.; Wilhite, Elmer L.

2008-01-01

The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) conducts performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. These performance assessments, which result in limits on the amounts of radiological substances that can be placed in the waste disposal facilities, consider numerous potential exposure pathways that could occur in the future. One set of exposure scenarios, known as inadvertent intruder analysis, considers the impact on hypothetical individuals who are assumed to inadvertently intrude onto the waste disposal site. Inadvertent intruder analysis considers three distinct scenarios for exposure referred to as the agriculture scenario, the resident scenario, and the post-drilling scenario. Each of these scenarios has specific exposure pathways that contribute to the overall dose for the scenario. For the inadvertent intruder analysis, the calculation of dose for the exposure pathways is a relatively straightforward algebraic calculation that utilizes dose conversion factors. Prior to 2004, these calculations were performed using an Excel spreadsheet. However, design checks of the spreadsheet calculations revealed that errors could be introduced inadvertently when copying spreadsheet formulas cell by cell and finding these errors was tedious and time consuming. This weakness led to the specification of functional requirements to create a software application that would automate the calculations for inadvertent intruder analysis using a controlled source of input parameters. This software application, named the Automated Inadvertent Intruder Application, has undergone rigorous testing of the internal calculations and meets software QA requirements. The Automated Inadvertent Intruder Application was intended to replace the previous spreadsheet analyses with an automated application that was verified to produce the same calculations and

Dosimetric differences between electrons beams with rio applicators of GMV and conventional Elekta applicators

International Nuclear Information System (INIS)

Sendon del Rio, J. R.; Ayala Lazaro, R.; Jimenez Rojas, M. R.; Gomez Cores, S.; Gonzalez Ruiz, C.; Garcia Hernandez, M. J.; Lopez Bote, M. A.

2013-01-01

Intraoperative radiotherapy (River) is a form of cancer treatment that consists of a session of radiation ionizing on macroscopic tumor or tumor bed surgically exposed. In our institution, is administered with beams of electrons in a Linear Accelerator for use general and adapted through specific (applicators RIVER). In this work we studied the dosimetry differences between modified by applicators electron beams conventional and they changed by applicators River. (Author)

BEAM applications to polymer materials

International Nuclear Information System (INIS)

Tagawa, Seiichi

1994-01-01

Recently papers about beam applications to polymers have been increasing rapidly both in the fundamental and applied fields. Fairly large number of papers have been published in the fundamental aspects of radiation effects of beam applications to polymers such as pulse radiolysis and high density electronic excitation effects. A number of papers have been published in the more applied aspects of beam applications to polymers such as radiation processing and curing. The present paper describes recent beam applications to polymers. 1. Radiation Effects on Polymers; Radiation effects on polymers have been studied for more than 40 years. Most of work on radiation effects on polymers has been carried out by using high energy photon (gamma-ray) and electron beams, since polymers are sensitive to any kinds of ionizing radiation. Even non-ionizing radiation such as ultraviolet and visible light excites electronic excited states of polymers and then photo-chemical reactions of polymers are induced from the electronic excited states. Studies on radiation effects of other ionizing radiation on polymers have not been so popular for a long time. Recently application of new radiation such as ion beams to polymers have been worthy of remark in fields of advanced science and technology, since new radiation beams induce different radiation effects from those induced by high energy gamma-rays and electrons. 2. Beam Applications of Polymers; Recent progress in beam applications to polymers such as radiation processing and curing, x-ray and electron beam microlithography, and applications of new beams such as ion beams to polymers has been reviewed. (author)

Smartphone Applications for Mental Health

Science.gov (United States)

Vona, Pamela L.; Santostefano, Antonella M.; Ciaravino, Samantha; Miller, Elizabeth; Stein, Bradley D.

2016-01-01

Abstract Many adolescents and adults do not seek treatment for mental health symptoms. Smartphone applications (apps) may assist individuals with mental health concerns in alleviating symptoms or increasing understanding. This study seeks to characterize apps readily available to smartphone users seeking mental health information and/or support. Ten key terms were searched in the Apple iTunes and Google Play stores: mental health, depression, anxiety, schizophrenia, bipolar, trauma, trauma in schools, post traumatic stress disorder (PTSD), child trauma, and bullying. A content analysis of the first 20 application descriptions retrieved per category was conducted. Out of 300 nonduplicate applications, 208 (70%) were relevant to search topic, mental health or stress. The most common purported purpose for the apps was symptom relief (41%; n = 85) and general mental health education (18%; n = 37). The most frequently mentioned approaches to improving mental health were those that may benefit only milder symptoms such as relaxation (21%; n = 43). Most app descriptions did not include information to substantiate stated effectiveness of the application (59%; n = 123) and had no mention of privacy or security (89%; n = 185). Due to uncertainty of the helpfulness of readily available mental health applications, clinicians working with mental health patients should inquire about and provide guidance on application use, and patients should have access to ways to assess the potential utility of these applications. Strategic policy and research developments are likely needed to equip patients with applications for mental health, which are patient centered and evidence based. PMID:27428034

Peaceful applications of nuclear explosions

International Nuclear Information System (INIS)

Wallin, L.B.

1975-12-01

The intension of this report is to give a survey of the field of peaceful applications of nuclear explosions. As an introduction some examples of possibilities of application are given together with a simple description of nuclear explosions under ground. After a summary of what has been done and will be done in this field nationally and internationally, a short discussion of advantages and problems with peaceful application of nuclear explosions follows. The risks of spreading nuclear weapons due to this applications are also touched before the report is finished with an attempt to judge the future development in this field. (M.S.)

iPhone Applications Tune-Up

CERN Document Server

Moses, Loyal

2011-01-01

Written to be read straight through as well as to be used as a technical reference, each chapter of this book focuses on an individual aspect of application performance and how it relates to the overall development and tune-up process. The reader will be introduced to the fundamentals of iOS performance bottlenecks and how poor application performance can and does affect a user's experience, adoption, and ultimately success This book is for iOS application developers who are interested in resolving application performance bottlenecks in both new and existing Xcode projects. Readers should be f

Modelling Foundations and Applications

DEFF Research Database (Denmark)

This book constitutes the refereed proceedings of the 8th European Conference on Modelling Foundations and Applications, held in Kgs. Lyngby, Denmark, in July 2012. The 20 revised full foundations track papers and 10 revised full applications track papers presented were carefully reviewed...

Medical application of EPR

International Nuclear Information System (INIS)

Eichhoff, Uwe; Hoefer, Peter

2015-01-01

Selected applications of continuous-wave EPR in medicine are reviewed. This includes detection of reactive oxygen and nitrogen species, pH measurements and oxymetry. Applications of EPR imaging are demonstrated on selected examples and future developments to faster imaging methods are discussed

Nanomaterials in biomedical applications

DEFF Research Database (Denmark)

Christiansen, Jesper de Claville; Potarniche, Catalina-Gabriela; Vuluga, Z.

2011-01-01

Advances in nano materials have lead to applications in many areas from automotive to electronics and medicine. Nano composites are a popular group of nano materials. Nanocomposites in medical applications provide novel solutions to common problems. Materials for implants, biosensors and drug del...

Applications of Evolutionary Computation

NARCIS (Netherlands)

Mora, Antonio M.; Squillero, Giovanni; Di Chio, C; Agapitos, Alexandros; Cagnoni, Stefano; Cotta, Carlos; Fernández De Vega, F; Di Caro, G A; Drechsler, R.; Ekárt, A; Esparcia-Alcázar, Anna I.; Farooq, M; Langdon, W B; Merelo-Guervós, J.J.; Preuss, M; Richter, O.-M.H.; Silva, Sara; Sim$\\$~oes, A; Squillero, Giovanni; Tarantino, Ernesto; Tettamanzi, Andrea G B; Togelius, J; Urquhart, Neil; Uyar, A S; Yannakakis, G N; Smith, Stephen L; Caserta, Marco; Ramirez, Adriana; Voß, Stefan; Squillero, Giovanni; Burelli, Paolo; Mora, Antonio M.; Squillero, Giovanni; Jan, Mathieu; Matthias, M; Di Chio, C; Agapitos, Alexandros; Cagnoni, Stefano; Cotta, Carlos; Fernández De Vega, F; Di Caro, G A; Drechsler, R.; Ekárt, A; Esparcia-Alcázar, Anna I.; Farooq, M; Langdon, W B; Merelo-Guervós, J.J.; Preuss, M; Richter, O.-M.H.; Silva, Sara; Sim$\\$~oes, A; Squillero, Giovanni; Tarantino, Ernesto; Tettamanzi, Andrea G B; Togelius, J; Urquhart, Neil; Uyar, A S; Yannakakis, G N; Caserta, Marco; Ramirez, Adriana; Voß, Stefan; Squillero, Giovanni; Burelli, Paolo; Esparcia-Alcazar, Anna I; Silva, Sara; Agapitos, Alexandros; Cotta, Carlos; De Falco, Ivanoe; Cioppa, Antonio Della; Diwold, Konrad; Ekart, Aniko; Tarantino, Ernesto; Vega, Francisco Fernandez De; Burelli, Paolo; Sim, Kevin; Cagnoni, Stefano; Simoes, Anabela; Merelo, J.J.; Urquhart, Neil; Haasdijk, Evert; Zhang, Mengjie; Squillero, Giovanni; Eiben, A E; Tettamanzi, Andrea G B; Glette, Kyrre; Rohlfshagen, Philipp; Schaefer, Robert; Caserta, Marco; Ramirez, Adriana; Voß, Stefan

2015-01-01

The application of genetic and evolutionary computation to problems in medicine has increased rapidly over the past five years, but there are specific issues and challenges that distinguish it from other real-world applications. Obtaining reliable and coherent patient data, establishing the clinical

47 CFR 76.41 - Franchise application process.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Franchise application process. 76.41 Section 76... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Cable Franchise Applications § 76.41 Franchise application process. (a) Definition. Competitive franchise applicant. For the purpose of this section, an applicant...

Microtron for radiation applications

International Nuclear Information System (INIS)

Soni, H.C.; Ramamurthi, S.S.

1993-01-01

The electron accelerator called microtron is a powerful tool for research, medical and industrial applications which need electron beam in energy range of few tens of MeV. Either electron beam from microtron is directly used for radiation applications or electron beam is utilized to produce x-rays or neutrons which are eventually used for radiation applications. After considering the vast potential, lower cost, simpler construction and excellent quality of electron beam from microtron, it was decided to develop this machine at Centre for Advanced Technology (CAT). The microtrons in two standard models have been developed which will cover all the above mentioned applications except free electron lasers. The microtron of model 1 provides electron beam of 20 MeV, 15/30 mA and that of model 2 provides electron beam of 8/12 MeV, 50/30 mA. (author). 2 figs., 1 tab

IOS SAFETY APPLICATION FOR UITM

Directory of Open Access Journals (Sweden)

MOHAMAD FAHMI HUSSIN

2016-04-01

Full Text Available This paper presents an iOS application, which is developed, to ensure that every task related to safety and health such as inspection, deviation analysis and accident reporting becomes more simple and easier. Normally, these three (3 tasks are done separately and the data are saved in different ways. These situations make the tasks become complicated and consume a lot of time. Therefore, this application is developed to overcome all the problems that occurred. The main objective of this application is to allow the user to handle inspection checklist, deviation analysis and accident reporting efficiently by using iOS devices such as iPhone and iPad. Hence, using iOS device, instead of using a lot of paper, can do all the tasks. Using Xcode SDK, which is the software that is used to develop iOS application, developed this application. Xcode use Objective-C as the programming language, which is quite similar with other programming languages such as C and C++. The final result of this project is that this application can handle all the three (3 tasks and the form or the findings can be emailed to the Safety and Health Officer (SHO. This application will reduce time consume to conduct safety inspection, deviation and reporting tasks as well as avoid delay that might happen while using the traditional method.

Graphene energy storage and conversion applications

CERN Document Server

Liu, Zhaoping

2014-01-01

Series PrefacePrefaceAuthorsGraphene Overview; Xufeng Zhou, Wei Wang, and Zhaoping LiuSynthesis of Graphene; Wei Wang, Hailiang Cao, Xufeng Zhou, and Zhaoping LiuApplications of Graphene in Lithium Ion Batteries; Xufeng Zhou and Zhaoping LiuApplications of Graphene in New-Concept Batteries; Xufeng Zhou and Zhaoping LiuApplications of Graphene in Supercapacitors; Chao Zheng, Xufeng Zhou, Hailiang Cao, and Zhaoping LiuApplications of Graphene in Solar Cells; Fuqiang Huang, Dongyun Wan, Hui Bi, and Tianquan LinApplications of Graphene in Fuel Cells; Xuejun Zhou, Jinli Qiao, and Yuyu LiuIndex.

The Management of the Citizen Oriented Applications

Directory of Open Access Journals (Sweden)

Ion IVAN

2010-04-01

Full Text Available The context of the knowledge based society is presented. The new user requirements in the context of the new society are analyzed. Basic concepts regarding the citizen oriented applications are presented. Issues specific to the citizen oriented applications are presented. The development cycle of the citizen oriented applications is analyzed. The particular elements for developing citizen oriented applications are described. The quality concept for the citizen oriented applications is defined. Quality characteristics and the costs of quality are defined and analyzed. A system of indicators for the quantification of the quality of the citizen oriented applications is developed. Ways of increasing the quality of the applications are analyzed. Issues as improving the users’ training level, implementing new development techniques, advanced testing techniques and the requirement of audit are approached. The concept of optimization is defined. Optimum criteria are defined and analyzed. Ways of optimizing applications are described. Security requirements are enumerated and described. The particularities of the security requirements for the citizen oriented applications are analyzed. Measures for ensuring the security of the citizen oriented applications are described. A citizen oriented application for the analysis of the structured entities is developed. The application collects data regarding the behavior of the users. The collected data are used for verifying the hypotheses regarding the quality characteristics if the citizen oriented informatics applications.

iPhone Open Application Development Write Native Applications Using the Open Source Tool Chain

CERN Document Server

Zdziarski, Jonathan

2008-01-01

Developers everywhere are eager to create applications for the iPhone, and many of them prefer the open source, community-developed tool chain to Apple's own toolkit. This new edition of iPhone Open Application Development covers the latest version of the open toolkit -- now updated for Apple's iPhone 2.x software and iPhone 3G -- and explains in clear language how to create applications using Objective-C and the iPhone API.

Other applications of ion microbeams

International Nuclear Information System (INIS)

Cookson, J.A.

1987-01-01

The paper concerns the analytical and non-analytical applications of ion microbeams. The analytical applications considered include:-fusion research, environmental studies, ion implantations and criminology, and each is briefly discussed. Non-analytical applications in which nuclear microprobes have been used include:-thickness and uniformity measurements, energy loss radiography, channelling contrast, tomography, topography, ion implantation, and detector testing, and these are also discussed. (UK)

Pervasive Application Rights Management Architecture

OpenAIRE

Dusparic, Ivana

2005-01-01

This dissertation describes an application rights management architecture that combines license management with digital rights management to provide an integrated platform for the specification, generation, delivery and management of application usage rights for pervasive computing environments. A new rights expression language is developed, extended from the existing language, ODRL, which allows the expression of mobile application usage rights and supports fine-grained usage ...

The application of RFQs

International Nuclear Information System (INIS)

Schempp, A.

1992-01-01

The Radio Frequency Quadrupole Accelerator (RFQ) has found wide application, not only as the preinjector linac for new high energy light ion accelerators but also in a variety of other projects. Progress in development has made ion linacs practical for medical and industrial applications including radiation therapy, isotope and neutron production, material modification and ion beam diagnostic. The paper discusses various projects together with applications in science where RFQs serve as stand-alone tools, for example for the calibration of detectors, as decelerators or as small compact beam sources for atomic physics and materials research. (Author) 7 figs., 40 refs

Lift application development cookbook

CERN Document Server

Garcia, Gilberto T

2013-01-01

Lift Application Development Cookbook contains practical recipes on everything you will need to create secure web applications using this amazing framework.The book first teaches you basic topics such as starting a new application and gradually moves on to teach you advanced topics to achieve a certain task. Then, it explains every step in detail so that you can build your knowledge about how things work.This book is for developers who have at least some basic knowledge about Scala and who are looking for a functional, secure, and modern web framework. Prior experience with HTML and JavaScript

Building Social Web Applications

CERN Document Server

Bell, Gavin

2009-01-01

Building a web application that attracts and retains regular visitors is tricky enough, but creating a social application that encourages visitors to interact with one another requires careful planning. This book provides practical solutions to the tough questions you'll face when building an effective community site -- one that makes visitors feel like they've found a new home on the Web. If your company is ready to take part in the social web, this book will help you get started. Whether you're creating a new site from scratch or reworking an existing site, Building Social Web Applications

Technology Applications Team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

WAPTT - Web Application Penetration Testing Tool

Directory of Open Access Journals (Sweden)

DURIC, Z.

2014-02-01

Full Text Available Web applications vulnerabilities allow attackers to perform malicious actions that range from gaining unauthorized account access to obtaining sensitive data. The number of reported web application vulnerabilities in last decade is increasing dramatically. The most of vulnerabilities result from improper input validation and sanitization. The most important of these vulnerabilities based on improper input validation and sanitization are: SQL injection (SQLI, Cross-Site Scripting (XSS and Buffer Overflow (BOF. In order to address these vulnerabilities we designed and developed the WAPTT (Web Application Penetration Testing Tool tool - web application penetration testing tool. Unlike other web application penetration testing tools, this tool is modular, and can be easily extended by end-user. In order to improve efficiency of SQLI vulnerability detection, WAPTT uses an efficient algorithm for page similarity detection. The proposed tool showed promising results as compared to six well-known web application scanners in detecting various web application vulnerabilities.

Sharing Vital Signs between mobile phone applications.

Science.gov (United States)

Karlen, Walter; Dumont, Guy A; Scheffer, Cornie

2014-01-01

We propose a communication library, ShareVitalSigns, for the standardized exchange of vital sign information between health applications running on mobile platforms. The library allows an application to request one or multiple vital signs from independent measurement applications on the Android OS. Compatible measurement applications are automatically detected and can be launched from within the requesting application, simplifying the work flow for the user and reducing typing errors. Data is shared between applications using intents, a passive data structure available on Android OS. The library is accompanied by a test application which serves as a demonstrator. The secure exchange of vital sign information using a standardized library like ShareVitalSigns will facilitate the integration of measurement applications into diagnostic and other high level health monitoring applications and reduce errors due to manual entry of information.

SAMP, the Simple Application Messaging Protocol: Letting applications talk to each other

Science.gov (United States)

Taylor, M. B.; Boch, T.; Taylor, J.

2015-06-01

SAMP, the Simple Application Messaging Protocol, is a hub-based communication standard for the exchange of data and control between participating client applications. It has been developed within the context of the Virtual Observatory with the aim of enabling specialised data analysis tools to cooperate as a loosely integrated suite, and is now in use by many and varied desktop and web-based applications dealing with astronomical data. This paper reviews the requirements and design principles that led to SAMP's specification, provides a high-level description of the protocol, and discusses some of its common and possible future usage patterns, with particular attention to those factors that have aided its success in practice.

Functionalized carbon nanotubes: biomedical applications

Science.gov (United States)

Vardharajula, Sandhya; Ali, Sk Z; Tiwari, Pooja M; Eroğlu, Erdal; Vig, Komal; Dennis, Vida A; Singh, Shree R

2012-01-01

Carbon nanotubes (CNTs) are emerging as novel nanomaterials for various biomedical applications. CNTs can be used to deliver a variety of therapeutic agents, including biomolecules, to the target disease sites. In addition, their unparalleled optical and electrical properties make them excellent candidates for bioimaging and other biomedical applications. However, the high cytotoxicity of CNTs limits their use in humans and many biological systems. The biocompatibility and low cytotoxicity of CNTs are attributed to size, dose, duration, testing systems, and surface functionalization. The functionalization of CNTs improves their solubility and biocompatibility and alters their cellular interaction pathways, resulting in much-reduced cytotoxic effects. Functionalized CNTs are promising novel materials for a variety of biomedical applications. These potential applications are particularly enhanced by their ability to penetrate biological membranes with relatively low cytotoxicity. This review is directed towards the overview of CNTs and their functionalization for biomedical applications with minimal cytotoxicity. PMID:23091380

Application-Defined Decentralized Access Control

Science.gov (United States)

Xu, Yuanzhong; Dunn, Alan M.; Hofmann, Owen S.; Lee, Michael Z.; Mehdi, Syed Akbar; Witchel, Emmett

2014-01-01

DCAC is a practical OS-level access control system that supports application-defined principals. It allows normal users to perform administrative operations within their privilege, enabling isolation and privilege separation for applications. It does not require centralized policy specification or management, giving applications freedom to manage their principals while the policies are still enforced by the OS. DCAC uses hierarchically-named attributes as a generic framework for user-defined policies such as groups defined by normal users. For both local and networked file systems, its execution time overhead is between 0%–9% on file system microbenchmarks, and under 1% on applications. This paper shows the design and implementation of DCAC, as well as several real-world use cases, including sandboxing applications, enforcing server applications’ security policies, supporting NFS, and authenticating user-defined sub-principals in SSH, all with minimal code changes. PMID:25426493

Arithmetic circuits for DSP applications

CERN Document Server

Stouraitis, Thanos

2017-01-01

Arithmetic Circuits for DSP Applications is a complete resource on arithmetic circuits for digital signal processing (DSP). It covers the key concepts, designs and developments of different types of arithmetic circuits, which can be used for improving the efficiency of implementation of a multitude of DSP applications. Each chapter includes various applications of the respective class of arithmetic circuits along with information on the future scope of research. Written for students, engineers, and researchers in electrical and computer engineering, this comprehensive text offers a clear understanding of different types of arithmetic circuits used for digital signal processing applications. The text includes contributions from noted researchers on a wide range of topics, including a review o circuits used in implementing basic operations like additions and multiplications; distributed arithmetic as a technique for the multiplier-less implementation of inner products for DSP applications; discussions on look ...

Industrial accelerators and their applications

CERN Document Server

Hamm, Marianne E

2012-01-01

This unique new book is a comprehensive review of the many current industrial applications of particle accelerators, written by experts in each of these fields. Readers will gain a broad understanding of the principles of these applications, the extent to which they are employed, and the accelerator technology utilized. The book also serves as a thorough introduction to these fields for non-experts and laymen. Due to the increased interest in industrial applications, there is a growing interest among accelerator physicists and many other scientists worldwide in understanding how accelerators are used in various applications. The government agencies that fund scientific research with accelerators are also seeking more information on the many commercial applications that have been or can be developed with the technology developments they are funding. Many industries are also doing more research on how they can improve their products or processes using particle beams.

The Java EE architect's handbook how to be a successful application architect for Java EE applications

CERN Document Server

Ashmore, Derek C.

2014-01-01

This handbook is a concise guide to assuming the role of application architect for Java EE applications. This handbook will guide the application architect through the entire Java EE project including identifying business requirements, performing use-case analysis, object and data modeling, and guiding a development team during construction. This handbook will provide tips and techniques for communicating with project managers and management. This handbook will provide strategies for making your application easier and less costly to support. Whether you are about to architect your first Java EE application or are looking for ways to keep your projects on-time and on-budget, you will refer to this handbook again and again.

PRA insights applicable to the design of the Broad Applications Test Reactor

International Nuclear Information System (INIS)

Khericha, S.T.; Reilly, H.J.

1993-01-01

Design insights applicable to the design of a new Broad Applications Test Reactor (BATR), being studied at Idaho National Engineering Laboratory, are summarized. Sources of design insights include past probabilistic risk assessments and related studies for department of Energy-owned Class A reactors and for commercial reactors. The report includes a preliminary risk allocation scheme for the BATR

PRACTICAL APPLICATION OF QUALITY TOOLS

Directory of Open Access Journals (Sweden)

Duško Pavletić

2008-09-01

Full Text Available The paper is dealing with one segment of broader research of universality an systematicness in application of seven basic quality tools (7QC tools, which is possible to use in different areas: power plant, process industry, government, health and tourism services. The aim of the paper was to show on practical examples that there is real possibility of application of 7QC tools. Furthermore, the research has to show to what extent are selected tools in usage and what reasons of avoiding their broader application are. The simple example of successful application of the quality tools are shown on selected company in process industry.

Migrating Applications to IPv6

CERN Document Server

York, Dan

2011-01-01

If IPv6 is to be adopted on a large scale, the applications running on desktop systems, laptops, and even mobile devices need to work just as well with this protocol as they do with IPv4. This concise book takes you beyond the network layer and helps you explore the issues you need to address if you are to successfully migrate your apps to IPv6. It's ideal for application developers, system/network architects, product managers, and others involved in moving your network to IPv6. Explore changes you need to make in your application's user interfaceMake sure your application is retrieving corre

Marshall Application Realignment System (MARS) Architecture

Science.gov (United States)

Belshe, Andrea; Sutton, Mandy

2010-01-01

The Marshall Application Realignment System (MARS) Architecture project was established to meet the certification requirements of the Department of Defense Architecture Framework (DoDAF) V2.0 Federal Enterprise Architecture Certification (FEAC) Institute program and to provide added value to the Marshall Space Flight Center (MSFC) Application Portfolio Management process. The MARS Architecture aims to: (1) address the NASA MSFC Chief Information Officer (CIO) strategic initiative to improve Application Portfolio Management (APM) by optimizing investments and improving portfolio performance, and (2) develop a decision-aiding capability by which applications registered within the MSFC application portfolio can be analyzed and considered for retirement or decommission. The MARS Architecture describes a to-be target capability that supports application portfolio analysis against scoring measures (based on value) and overall portfolio performance objectives (based on enterprise needs and policies). This scoring and decision-aiding capability supports the process by which MSFC application investments are realigned or retired from the application portfolio. The MARS Architecture is a multi-phase effort to: (1) conduct strategic architecture planning and knowledge development based on the DoDAF V2.0 six-step methodology, (2) describe one architecture through multiple viewpoints, (3) conduct portfolio analyses based on a defined operational concept, and (4) enable a new capability to support the MSFC enterprise IT management mission, vision, and goals. This report documents Phase 1 (Strategy and Design), which includes discovery, planning, and development of initial architecture viewpoints. Phase 2 will move forward the process of building the architecture, widening the scope to include application realignment (in addition to application retirement), and validating the underlying architecture logic before moving into Phase 3. The MARS Architecture key stakeholders are most

Industrial applications of radiotracers in Indonesia

International Nuclear Information System (INIS)

Wandowo

1994-01-01

Applications of isotopes and radiation have been developed since 1970 at the Centre for Application of Isotopes and Radiation, National Atomic Energy Agency or BATAN. The scope of applications cover various fields, namely, agriculture, medicine, hydrology, sedimentology and industry. The use of radiotracers prove to be very beneficial for problem solving in industrial process plants and this technique will continuously be promoted by BATAN to industries in Indonesia. Several examples of radiotracer applications in industries which have been carried out by the Group of Industry of the Centre for Application of Isotopes and Radiation are presented. (author). 7 refs., 4 figs., 1 tab

Industrial Applications of Pulsed Power Technology

Science.gov (United States)

Takaki, Koichi; Katsuki, Sunao

Recent progress of the industrial applications of pulsed power is reviewed in this paper. Repetitively operated pulsed power generators with a moderate peak power have been developed for industrial applications. These generators are reliable and low maintenance. Development of the pulsed power generators helps promote industrial applications of pulsed power for such things as food processing, medical treatment, water treatment, exhaust gas treatment, ozone generation, engine ignition, ion implantation and others. Here, industrial applications of pulsed power are classified by application for biological effects, for pulsed streamer discharges in gases, for pulsed discharges in liquid or liquid-mixture, and for bright radiation sources.

Practical Challenges for Digital Watermarking Applications

Directory of Open Access Journals (Sweden)

Sharma Ravi K

2002-01-01

Full Text Available The field of digital watermarking has recently seen numerous articles covering novel techniques, theoretical studies, attacks, and analysis. In this paper, we focus on an emerging application to highlight practical challenges for digital watermarking applications. Challenges include design considerations, requirements analysis, choice of watermarking techniques, speed, robustness, and the tradeoffs involved. We describe common attributes of watermarking systems and discuss the challenges in developing real world applications. Our application uses digital watermarking to connect ordinary toys to the digital world. The application captures important aspects of watermarking systems and illustrates some of the design issues faced.

Application of nanotechnology in biology and promising application in radiobiology

International Nuclear Information System (INIS)

Zhao Sanhu; Ni Jin; Cai Jianming

2011-01-01

As one of the 21-Century high and new technologies, nanotechnology (NT) has been widely applied in all aspects of biology. From now on, it has been used for detecting substance, carrying drug, antibacterial and tumour therapy by its photometric characteristics, mechanics characteristics, thermal property and other characteristics. Because of the unique advantages of nanoparticles, nanotechnology has great potential in radioprotection. In this article, we introduced the application of nanotechnology in modern biology and the primal problems. Meantime, we explain the prospect of its application in radioprotection. (authors)

Application of decision-making methodology to certificate-of-need applications for CT scanners

International Nuclear Information System (INIS)

Gottinger, H.W.; Shapiro, P.

1985-01-01

This paper describes a case study and application of decision-making methodology to two competing Certificate of Need (CON) applications for CT body scanners. We demonstrate the use of decision-making methodology by evaluating the CON applications. Explicit value judgements reflecting the monetary equivalent of the different categories of benefit are introduced to facilitate this comparison. The difference between the benefits (measured in monetary terms) and costs is called the net social value. Any alternative with positive net social value is judged economically justifiable, and the alternative with the greatest net social value is judged the most attractive. (orig.)

Soft Computing Applications : Proceedings of the 5th International Workshop Soft Computing Applications

CERN Document Server

Fodor, János; Várkonyi-Kóczy, Annamária; Dombi, Joszef; Jain, Lakhmi

2013-01-01

                This volume contains the Proceedings of the 5thInternational Workshop on Soft Computing Applications (SOFA 2012).                                The book covers a broad spectrum of soft computing techniques, theoretical and practical applications employing knowledge and intelligence to find solutions for world industrial, economic and medical problems. The combination of such intelligent systems tools and a large number of applications introduce a need for a synergy of scientific and technological disciplines in order to show the great potential of Soft Computing in all domains.                   The conference papers included in these proceedings, published post conference, were grouped into the following area of research: ·         Soft Computing and Fusion Algorithms in Biometrics, ·         Fuzzy Theory, Control andApplications, ·         Modelling and Control Applications, ·         Steps towa...

Dilemmas in SEA application

DEFF Research Database (Denmark)

Lyhne, Ivar

Dilemmas in SEA Application: The DK Energy SectorIvar Lyhne - lyhne@plan.aau.dk. Based on three years of collaborative research, this paper outlines dilemmas in the application of SEA in the strategic development of the Danish energy sector. The dilemmas are based on concrete examples from practice...

Telerehabilitation store and forward applications: a review of applications and privacy considerations in physical and occupational therapy practice.

Science.gov (United States)

Peterson, Christopher; Watzlaf, Valerie

2014-01-01

An overview of store and forward applications commonly used in physical and occupational therapy practice is reviewed with respect to regulation, privacy, security, and clinical applications. A privacy and security checklist provides a clear reference of pertinent regulatory issues regarding these software applications. A case study format is used to highlight clinical applications of store and forward software features. Important considerations of successful implementation of store and forward applications are also identified and discussed.

Retirement Applicant Satisfaction Survey Results

Data.gov (United States)

Social Security Administration — This dataset contains information about the Retirement Applicant Survey (RAS). The survey measured satisfaction results with the retirement application process. The...

Multimedia applications in differential services

International Nuclear Information System (INIS)

Mahfooz, S.; Merabti, M.; Pereira, R.

2003-01-01

In this paper we present a mechanism to provide Quality of Service (QoS) guarantees to different multimedia applications that share link bandwidth in IP-based differential services domain. In this mechanism weights are associated with each and to individual users according to their priorities. In order to evaluate the performance of our scheme we conducted simulations. The test data used portray different multimedia applications i.e. MPEG-2, IP telephony. The simulation results obtained show the effectiveness of our scheme for multimedia applications by allocating link share to each multimedia application and minimising end-to-end transmission delay 9Y bringing them in line with the recommended standard acceptable transmission delay for multimedia applications. This paper also presents extension to our proposed Relative Bandwidth Sharing (RES) scheme for differential services. We have identified and highlighted the role of border routers and core routers in differential services domain. Exploring features of Internet Protocol IPv6 in our architecture. (author)

Mass Spectrometry Applications for Toxicology.

Science.gov (United States)

Mbughuni, Michael M; Jannetto, Paul J; Langman, Loralie J

2016-12-01

Toxicology is a multidisciplinary study of poisons, aimed to correlate the quantitative and qualitative relationships between poisons and their physiological and behavioural effects in living systems. Other key aspects of toxicology focus on elucidation of the mechanisms of action of poisons and development of remedies and treatment plans for associated toxic effects. In these endeavours, Mass spectrometry (MS) has become a powerful analytical technique with a wide range of application used in the Toxicological analysis of drugs, poisons, and metabolites of both. To date, MS applications have permeated all fields of toxicology which include; environmental, clinical, and forensic toxicology. While many different analytical applications are used in these fields, MS and its hyphenated applications such as; gas chromatography MS (GC-MS), liquid chromatography MS (LC-MS), inductively coupled plasma ionization MS (ICP-MS), tandem mass spectrometry (MS/MS and MS n ) have emerged as powerful tools used in toxicology laboratories. This review will focus on these hyphenated MS technologies and their applications for toxicology.

Mass Spectrometry Applications for Toxicology

Science.gov (United States)

Mbughuni, Michael M.; Jannetto, Paul J.

2016-01-01

Toxicology is a multidisciplinary study of poisons, aimed to correlate the quantitative and qualitative relationships between poisons and their physiological and behavioural effects in living systems. Other key aspects of toxicology focus on elucidation of the mechanisms of action of poisons and development of remedies and treatment plans for associated toxic effects. In these endeavours, Mass spectrometry (MS) has become a powerful analytical technique with a wide range of application used in the Toxicological analysis of drugs, poisons, and metabolites of both. To date, MS applications have permeated all fields of toxicology which include; environmental, clinical, and forensic toxicology. While many different analytical applications are used in these fields, MS and its hyphenated applications such as; gas chromatography MS (GC-MS), liquid chromatography MS (LC-MS), inductively coupled plasma ionization MS (ICP-MS), tandem mass spectrometry (MS/MS and MSn) have emerged as powerful tools used in toxicology laboratories. This review will focus on these hyphenated MS technologies and their applications for toxicology. PMID:28149262

Review of magnetohydrodynamic pump applications

Directory of Open Access Journals (Sweden)

O.M. Al-Habahbeh

2016-06-01

Full Text Available Magneto-hydrodynamic (MHD principle is an important interdisciplinary field. One of the most important applications of this effect is pumping of materials that are hard to pump using conventional pumps. In this work, the progress achieved in this field is surveyed and organized according to the type of application. The literature of the past 27 years is searched for the major developments of MHD applications. MHD seawater thrusters are promising for a variety of applications requiring high flow rates and velocity. MHD molten metal pump is important replacement to conventional pumps because their moving parts cannot stand the molten metal temperature. MHD molten salt pump is used for nuclear reactor coolants due to its no-moving-parts feature. Nanofluid MHD pumping is a promising technology especially for bioapplications. Advantages of MHD include silence due to no-moving-parts propulsion. Much progress has been made, but with MHD pump still not suitable for wider applications, this remains a fertile area for future research.

Heat pipe applications workshop report

International Nuclear Information System (INIS)

Ranken, W.A.

1978-04-01

The proceedings of the Heat Pipe Applications Workshop, held at the Los Alamos Scientific Laboratory October 20-21, 1977, are reported. This workshop, which brought together representatives of the Department of Energy and of a dozen industrial organizations actively engaged in the development and marketing of heat pipe equipment, was convened for the purpose of defining ways of accelerating the development and application of heat pipe technology. Recommendations from the three study groups formed by the participants are presented. These deal with such subjects as: (1) the problem encountered in obtaining support for the development of broadly applicable technologies, (2) the need for applications studies, (3) the establishment of a heat pipe technology center of excellence, (4) the role the Department of Energy might take with regard to heat pipe development and application, and (5) coordination of heat pipe industry efforts to raise the general level of understanding and acceptance of heat pipe solutions to heat control and transfer problems

Handbook of satellite applications

CERN Document Server

Madry, Scott; Camacho-Lara, Sergio

2017-01-01

The first edition of this ground breaking reference work was the most comprehensive reference source available about the key aspects of the satellite applications field. This updated second edition covers the technology, the markets, applications and regulations related to satellite telecommunications, broadcasting and networking—including civilian and military systems; precise satellite navigation and timing networks (i.e. GPS and others); remote sensing and meteorological satellite systems. Created under the auspices of the International Space University based in France, this brand new edition is now expanded to cover new innovative small satellite constellations, new commercial launching systems, innovation in military application satellites and their acquisition, updated appendices, a useful glossary and more.

Biomaterials and therapeutic applications

Science.gov (United States)

Ferraro, Angelo

2016-03-01

A number of organic and inorganic, synthetic or natural derived materials have been classified as not harmful for the human body and are appropriate for medical applications. These materials are usually named biomaterials since they are suitable for introduction into living human tissues of prosthesis, as well as for drug delivery, diagnosis, therapies, tissue regeneration and many other clinical applications. Recently, nanomaterials and bioabsorbable polymers have greatly enlarged the fields of application of biomaterials attracting much more the attention of the biomedical community. In this review paper I am going to discuss the most recent advances in the use of magnetic nanoparticles and biodegradable materials as new biomedical tools.

Application of expert systems

Energy Technology Data Exchange (ETDEWEB)

Basden, A

1983-11-01

This article seeks to bring together a number of issues relevant to the application of expert systems by discussing their advantages and limitations, their roles and benefits, and the influence that real-life applications might have on the design of expert systems software. Part of the expert systems strategy of one major chemical company is outlined. Because it was in constructing one particular expert system that many of these issues became important this system is described briefly at the start of the paper and used to illustrate much of the later discussion. It is of the plausible-inference type and has application in the field of materials engineering. 22 references.

Superconductivity: materials and applications

International Nuclear Information System (INIS)

Duchateau, J.L.; Kircher, F.; Leveque, J.; Tixador, P.

2008-01-01

This digest paper presents the different types of superconducting materials: 1 - the low-TC superconductors: the multi-filament composite as elementary constituent, the world production of NbTi, the superconducting cables of the LHC collider and of the ITER tokamak; 2 - the high-TC superconductors: BiSrCaCuO (PIT 1G) ribbons and wires, deposited coatings; 3 - application to particle physics: the the LHC collider of the CERN, the LHC detectors; 4 - applications to thermonuclear fusion: Tore Supra and ITER tokamaks; 5 - NMR imaging: properties of superconducting magnets; 6 - applications in electrotechnics: cables, motors and alternators, current limiters, transformers, superconducting energy storage systems (SMES). (J.S.)

Stable Structures for Distributed Applications

OpenAIRE

Eugen DUMITRASCU; Ion IVAN

2008-01-01

For distributed applications, we define the linear, tree and graph structure types with different variants and modalities to aggregate them. The distributed applications have assigned structures that through their characteristics influence the costs of stages for developing cycle and the costs for exploitation, transferred to each user. We also present the quality characteristics of a structure for a stable application, which is focused on stability characteristic. For that characteristic we ...

Applications of high-temperature superconductivity

International Nuclear Information System (INIS)

Malozemoff, A.P.; Gallagher, W.J.; Schwall, R.E.

1987-01-01

The new high temperature superconductors open up possibilities for applications in magnets, power transmission, computer interconnections, Josephson devices and instrumentation, among many others. The success of these applications hinges on many interlocking factors, including critical current density, critical fields, allowable processing temperatures, mechanical properties and chemical stability. An analysis of some of these factors suggests which applications may be the easiest to realize and which may have the greatest potential

Security Testing Handbook for Banking Applications

CERN Document Server

Doraiswamy, Arvind; Kapoor, Nilesh

2009-01-01

Security Testing Handbook for Banking Applications is a specialised guide to testing a wide range of banking applications. The book is intended as a companion to security professionals, software developers and QA professionals who work with banking applications.

Extracurricular activities of medical school applicants

Directory of Open Access Journals (Sweden)

Sang Hyun Kim

2016-06-01

Full Text Available Purpose: The purpose of this study was to investigate medical school applicants’ involvements in extracurricular activities including medical volunteering/community services, nonmedical community services, club activities, leadership role, and research. Methods: Extracurricular characteristics were compared for 448 applicants (223 males and 225 females who applied to Kangwon Medical School in 2013 to 2014. Frequency analysis, chi-square test, and simple correlation were conducted with the collected data. Results: The 448 applicants participated in medical volunteer/community services (15.3%, nonmedical community services (39.8%, club activities (22.9%, club officials (10%, and research (13.4%. On average, applicants from foreign universities participated in 0.9 medical volunteer/community service, 0.8 nonmedical community service, 1.7 club activities, and 0.6 research work. On the other hand, applicants from domestic universities reported 0.2 medical volunteer/community service, 1.0 nonmedical community service, 0.7 club activity, and 0.3 research. Conclusion: Involvement in extracurricular activities was extensive for medical school applicants. Participation in extracurricular activities differed between applicants from foreign and domestic universities. Females consistently reported greater participation in extracurricular activities than males. The data can be helpful for admission committees to recruit well-rounded applicants and compare between applicants with similar academic backgrounds.

Methodology of developing a smartphone application for crisis research and its clinical application.

Science.gov (United States)

Zhang, Melvyn W B; Ho, Cyrus S H; Fang, Pan; Lu, Yanxia; Ho, Roger C M

2014-01-01

Recent advancement in Internet based technologies have resulted in the growth of a sub-specialized field, termed as "Infodemiology" and "Infoveillance". Infoveillence refers to the collation of infodemiology measures for the purpose of surveillance and trending. Previous research has only demonstrated the research potential of Web 2.0 medium in collation of data in crisis situation. The objectives for the current study are to demonstrate the methodology of implementation of a smartphone-based application for dissemination and collation of information during a crisis situation. The Haze Smartphone application was developed using an online application builder and using HTML5 as the core programming language. A five-phase developmental method including a) formulation of user requirements, b) system design, c) system development, d) system evaluation and finally e) system application and implementation were adopted. The smartphone application was deployed during a one-week period via a self-sponsored Facebook post and via direct dissemination of the web-links by emails. A total of 298 respondents took part in the survey within the application. Most of them were between the ages of 20- to 29-years old and had a university education. More individuals preferred the option of accessing and providing feedback to a survey on physical and psychological wellbeing via direct access to a Web-based questionnaire. In addition, the participants reported a mean number of 4.03 physical symptoms (SD 2.6). The total Impact of Event Scale-Revised (IES-R) score was 18.47 (SD 11.69), which indicated that the study population did experience psychological stress but not posttraumatic stress disorder. The perceived dangerous Pollutant Standards Index (PSI) level and the number of physical symptoms were associated with higher IES-R Score (Psmartphone application could potentially be used to acquire research data in a crisis situation. However, it is crucial for future research to further

Diamond-based materials for biomedical applications

CERN Document Server

Narayan, Roger

2013-01-01

Carbon is light-weight, strong, conductive and able to mimic natural materials within the body, making it ideal for many uses within biomedicine. Consequently a great deal of research and funding is being put into this interesting material with a view to increasing the variety of medical applications for which it is suitable. Diamond-based materials for biomedical applications presents readers with the fundamental principles and novel applications of this versatile material. Part one provides a clear introduction to diamond based materials for medical applications. Functionalization of diamond particles and surfaces is discussed, followed by biotribology and biological behaviour of nanocrystalline diamond coatings, and blood compatibility of diamond-like carbon coatings. Part two then goes on to review biomedical applications of diamond based materials, beginning with nanostructured diamond coatings for orthopaedic applications. Topics explored include ultrananocrystalline diamond for neural and ophthalmologi...

Plasma processing: Technologies and applications

International Nuclear Information System (INIS)

Naddaf, M.; Saloum, S.

2005-01-01

This study aims to present the fundamentals of physics of plasmas, methods of generation, diagnostics, and applications for processing of materials. The first chapter defines plasma in general as well as its main parameters, the most important differential equations in plasma physics, and classifies the types of plasmas. the various methods and techniques to create and sustain plasma are presented in the second chapter. Chapter 3 focuses on plasma diagnostic methods and tools. While chapter 4 deals with applications of plasma processing such as; surface modification of materials, plasma ashing and etching, plasma cutting, and the environmental applications of plasma. Plasma polymerization and its various applications have been presented in more details in the last chapter. (Author)

Piezoelectric nanomaterials for biomedical applications

CERN Document Server

Menciassi, Arianna

2012-01-01

Nanoscale structures and materials have been explored in many biological applications because of their novel and impressive physical and chemical properties. Such properties allow remarkable opportunities to study and interact with complex biological processes. This book analyses the state of the art of piezoelectric nanomaterials and introduces their applications in the biomedical field. Despite their impressive potentials, piezoelectric materials have not yet received significant attention for bio-applications. This book shows that the exploitation of piezoelectric nanoparticles in nanomedicine is possible and realistic, and their impressive physical properties can be useful for several applications, ranging from sensors and transducers for the detection of biomolecules to “sensible” substrates for tissue engineering or cell stimulation.

Telerehabilitation Store and Forward Applications: A Review of Applications and Privacy Considerations in Physical and Occupational Therapy Practice

Directory of Open Access Journals (Sweden)

Christopher Peterson

2015-01-01

Full Text Available An overview of store and forward applications commonly used in physical and occupational therapy practice is reviewed with respect to regulation, privacy, security, and clinical applications. A privacy and security checklist provides a clear reference of pertinent regulatory issues regarding these software applications. A case study format is used to highlight clinical applications of store and forward software features. Important considerations of successful implementation of store and forward applications are also identified and discussed.

Tunable laser applications

CERN Document Server

Duarte, FJ

2008-01-01

Introduction F. J. Duarte Spectroscopic Applications of Tunable Optical Parametric Oscillators B. J. Orr, R. T. White, and Y. He Solid-State Dye Lasers Costela, I. García-Moreno, and R. Sastre Tunable Lasers Based on Dye-Doped Polymer Gain Media Incorporating Homogeneous Distributions of Functional Nanoparticles F. J. Duarte and R. O. James Broadly Tunable External-Cavity Semiconductor Lasers F. J. Duarte Tunable Fiber Lasers T. M. Shay and F. J. Duarte Fiber Laser Overview and Medical Applications

Applications of Cell Microencapsulation.

Science.gov (United States)

Opara, Emmanuel C

2017-01-01

The goal of this chapter is to provide an overview of the different purposes for which the cell microencapsulation technology can be used. These include immunoisolation of non-autologous cells used for cell therapy; immobilization of cells for localized (targeted) delivery of therapeutic products to ablate, repair, or regenerate tissue; simultaneous delivery of multiple therapeutic agents in cell therapy; spatial compartmentalization of cells in complex tissue engineering; expansion of cells in culture; and production of different probiotics and metabolites for industrial applications. For each of these applications, specific examples are provided to illustrate how the microencapsulation technology can be utilized to achieve the purpose. However, successful use of the cell microencapsulation technology for whatever purpose will ultimately depend upon careful consideration for the choice of the encapsulating polymers, the method of fabrication (cross-linking) of the microbeads, which affects the permselectivity, the biocompatibility and the mechanical strength of the microbeads as well as environmental parameters such as temperature, humidity, osmotic pressure, and storage solutions.The various applications discussed in this chapter are illustrated in the different chapters of this book and where appropriate relevant images of the microencapsulation products are provided. It is hoped that this outline of the different applications of cell microencapsulation would provide a good platform for tissue engineers, scientists, and clinicians to design novel tissue constructs and products for therapeutic and industrial applications.

Applications of soft x-ray lasers

International Nuclear Information System (INIS)

Skinner, C.H.

1993-01-01

The high brightness and short pulse duration of soft x-ray lasers provide unique advantages for novel applications. Imaging of biological specimens using x-ray lasers has been demonstrated by several groups. Other applications to fields such as chemistry, material science, plasma diagnostics, and lithography are beginning to emerge. We review the current status of soft x-ray lasers from the perspective of applications, and present an overview of the applications currently being developed

Semiconducting silicon nanowires for biomedical applications

CERN Document Server

Coffer, JL

2014-01-01

Biomedical applications have benefited greatly from the increasing interest and research into semiconducting silicon nanowires. Semiconducting Silicon Nanowires for Biomedical Applications reviews the fabrication, properties, and applications of this emerging material. The book begins by reviewing the basics, as well as the growth, characterization, biocompatibility, and surface modification, of semiconducting silicon nanowires. It goes on to focus on silicon nanowires for tissue engineering and delivery applications, including cellular binding and internalization, orthopedic tissue scaffol

POSIX.1 conformance For Android Applications

OpenAIRE

Tayyaba Nafees; Prof. Dr. Shoab Ahmad Khan

2013-01-01

Android operating system is designed for use in mobile computing by The Open Handset Alliance. Android market has hundreds of thousands of Android applications and these applications are restricted only to the mobiles. This restriction is mainly because of portability and compatibility issues of Android operating system. So need of employing these countless Android applications on any POISX Desktop operating system without disturbing the internal structure of application is very desirable. Th...

What objects do controls applications need?

International Nuclear Information System (INIS)

Morris, J.T.; Abola, A.C.

1997-01-01

Discussions of object-oriented controls programming often focus on the important interface to accelerator devices. Experience shows that, for most applications, only a small part of the application work involves the accelerator device interface. Much of the work in application programs is dedicated to other areas such as user interface, data management and physics calculations. This paper will consider the software objects beyond the device interface that provide the most assistance to application programmers

15 CFR Notes Applicable to State... - Notes applicable to State of Understanding related to Medical Equipment:

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Notes applicable to State of Understanding related to Medical Equipment: applicable Notes applicable to State of Understanding related to Medical Equipment: Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY,...

Maintenance-Ready Web Application Development

Directory of Open Access Journals (Sweden)

Ion IVAN

2016-01-01

Full Text Available The current paper tackles the subject of developing maintenance-ready web applications. Maintenance is presented as a core stage in a web application’s lifecycle. The concept of maintenance-ready is defined in the context of web application development. Web application maintenance tasks types are enunciated and suitable task types are identified for further analysis. The research hypothesis is formulated based on a direct link between tackling maintenance in the development stage and reducing overall maintenance costs. A live maintenance-ready web application is presented and maintenance related aspects are highlighted. The web application’s features, that render it maintenance-ready, are emphasize. The cost of designing and building the web-application to be maintenance-ready are disclosed. The savings in maintenance development effort facilitated by maintenance ready features are also disclosed. Maintenance data is collected from 40 projects implemented by a web development company. Homogeneity and diversity of collected data is evaluated. A data sample is presented and the size and comprehensive nature of the entire dataset is depicted. Research hypothesis are validated and conclusions are formulated on the topic of developing maintenance-ready web applications. The limits of the research process which represented the basis for the current paper are enunciated. Future research topics are submitted for debate.

Nuclear applications in life sciences

International Nuclear Information System (INIS)

Uenak, P.

2009-01-01

Radioactivity has revolutionized life sciences during the last century, and it is still an indispensable tool. Nuclear Medicine, Radiation Biology and Radiotherapy, Dosimetry and Medical Radiation Physics, Nutrition and Environmental Problems Relevant Health are significant application fields of Nuclear Sciences. Nuclear medicine today is a well established branch of medicine. Radionuclides and radiopharmaceuticals play a key role both in diagnostic investigations and therapy-Both cyclotron and reactor produced radionuclides find application, the former more in diagnostic studies and the latter in therapy. New therapy applications such as bor neutron therapy are increasing by time together with the technological improvements in imaging systems such as PET and SPECT. Radionuclides and radiopharmaceuticals play important role in both therapy and imaging. However cyclotron produced radionuclides have been using generally in imaging purposes while reactor produced radionuclides have also therapeutic applications. With the advent of emission tomography, new vistas for probing biochemistry in vivo have been opened. The radio chemist faces an ever-increasing challenge of designing new tracers for diagnostic and therapeutic applications. Rapid, efficient and automated methods of radionuclide and precursor production, labeling of biomolecules, and quality control need to be developed. The purpose of this article is a short interface from Nuclear Medicine, Radiation Biology and Radiotherapy, Dosimetry and Medical Radiation Physics Applications of Nuclear Sciences.

The laser principles and application techniques

International Nuclear Information System (INIS)

Maillet, H.

1990-01-01

In this book on laser applications chapter 4 is devoted to uranium isotopic separation and chapter 5 to laser inertial fusion, other topics include machining, medical applications, measurements, military applications, holography, reprography, telecommunications, compact discs, light shows and safety [fr

Industrial applications and metallurgy

International Nuclear Information System (INIS)

Torres M, N.; Melendrez C, G.; Morales, F.L.

1989-01-01

From 1961 the use of nuclear energy in the industrial field in Colombia has a big advance. Today nuclear isotopes are used by private companies in this kind of application the Area of Industrial Applications and Metallurgy was the institution section that has trained and has transferred the technology needed for this purpose

IMS applications analysis

Energy Technology Data Exchange (ETDEWEB)

RODACY,PHILIP J.; REBER,STEPHEN D.; SIMONSON,ROBERT J.; HANCE,BRADLEY G.

2000-03-01

This report examines the market potential of a miniature, hand-held Ion Mobility Spectrometer. Military and civilian markets are discussed, as well as applications in a variety of diverse fields. The strengths and weaknesses of competing technologies are discussed. An extensive Ion Mobility Spectrometry (IMS) bibliography is included. The conclusions drawn from this study are: (1) There are a number of competing technologies that are capable of detecting explosives, drugs, biological, or chemical agents. The IMS system currently represents the best available compromise regarding sensitivity, specificity, and portability. (2) The military market is not as large as the commercial market, but the military services are more likely to invest R and D funds in the system. (3) Military applications should be addressed before commercial applications are addressed. (4) There is potentially a large commercial market for rugged, hand-held Ion Mobility Spectrometer systems. Commercial users typically do not invest R and D funds in this type of equipment rather, they wait for off-the-shelf availability.

Learning style preferences of surgical residency applicants.

Science.gov (United States)

Kim, Roger H; Gilbert, Timothy

2015-09-01

The learning style preferences of general surgery residents have been previously reported; there is evidence that residents who prefer read/write learning styles perform better on the American Board of Surgery In-Training Examination (ABSITE). However, little is known regarding the learning style preferences of applicants to general surgery residency and their impact on educational outcomes. In this study, the preferred learning styles of surgical residency applicants were determined. We hypothesized that applicant rank data are associated with specific learning style preferences. The Fleming VARK learning styles inventory was offered to all general surgery residency applicants that were interviewed at a university hospital-based program. The VARK model categorizes learners as visual (V), aural (A), read/write (R), kinesthetic (K), or multimodal (MM). Responses on the inventory were scored to determine the preferred learning style for each applicant. Applicant data, including United States Medical Licensing Examination (USMLE) scores, class rank, interview score, and overall final applicant ranking, were examined for association with preferred learning styles. Sixty-seven applicants were interviewed. Five applicants were excluded due to not completing the VARK inventory or having incomplete applicant data. The remaining 62 applicants (92%) were included for analysis. Most applicants (57%) had a multimodal preference. Sixty-nine percent of all applicants had some degree of preference for kinesthetic learning. There were statistically significant differences between applicants of different learning styles in terms of USMLE step 1 scores (P = 0.001) and USMLE step 2 clinical knowledge scores (P = 0.01), but not for class ranks (P = 0.27), interview scores (P = 0.20), or final ranks (P = 0.14). Multiple comparison analysis demonstrated that applicants with aural preferences had higher USMLE 1 scores (233.2) than those with kinesthetic (211.8, P = 0.005) or multimodal

Advanced in Computer Science and its Applications

CERN Document Server

Yen, Neil; Park, James; CSA 2013

2014-01-01

The theme of CSA is focused on the various aspects of computer science and its applications for advances in computer science and its applications and provides an opportunity for academic and industry professionals to discuss the latest issues and progress in the area of computer science and its applications. Therefore this book will be include the various theories and practical applications in computer science and its applications.

Review on thin-film transistor technology, its applications, and possible new applications to biological cells

Science.gov (United States)

Tixier-Mita, Agnès; Ihida, Satoshi; Ségard, Bertrand-David; Cathcart, Grant A.; Takahashi, Takuya; Fujita, Hiroyuki; Toshiyoshi, Hiroshi

2016-04-01

This paper presents a review on state-of-the-art of thin-film transistor (TFT) technology and its wide range of applications, not only in liquid crystal displays (TFT-LCDs), but also in sensing devices. The history of the evolution of the technology is first given. Then the standard applications of TFT-LCDs, and X-ray detectors, followed by state-of-the-art applications in the field of chemical and biochemical sensing are presented. TFT technology allows the fabrication of dense arrays of independent and transparent microelectrodes on large glass substrates. The potential of these devices as electrical substrates for biological cell applications is then described. The possibility of using TFT array substrates as new tools for electrical experiments on biological cells has been investigated for the first time by our group. Dielectrophoresis experiments and impedance measurements on yeast cells are presented here. Their promising results open the door towards new applications of TFT technology.

Mathematical modeling with multidisciplinary applications

CERN Document Server

Yang, Xin-She

2013-01-01

Features mathematical modeling techniques and real-world processes with applications in diverse fields Mathematical Modeling with Multidisciplinary Applications details the interdisciplinary nature of mathematical modeling and numerical algorithms. The book combines a variety of applications from diverse fields to illustrate how the methods can be used to model physical processes, design new products, find solutions to challenging problems, and increase competitiveness in international markets. Written by leading scholars and international experts in the field, the

Change in surface characteristics of coal in upgrading of low-rank coals; Teihin`itan kaishitsu process ni okeru sekitan hyomen seijo no henka

Energy Technology Data Exchange (ETDEWEB)

Oki, A.; Xie, X.; Nakajima, T.; Maeda, S. [Kagoshima University, Kagoshima (Japan). Faculty of Engineering

1996-10-28

With an objective to learn mechanisms in low-rank coal reformation processes, change of properties on coal surface was discussed. Difficulty in handling low-rank coal is attributed to large intrinsic water content. Since it contains highly volatile components, it has a danger of spontaneous ignition. The hot water drying (HWD) method was used for reformation. Coal which has been dry-pulverized to a grain size of 1 mm or smaller was mixed with water to make slurry, heated in an autoclave, cooled, filtered, and dried in vacuum. The HWD applied to Loy Yang and Yallourn coals resulted in rapid rise in pressure starting from about 250{degree}C. Water content (ANA value) absorbed into the coal has decreased largely, with the surface made hydrophobic effectively due to high temperature and pressure. Hydroxyl group and carbonyl group contents in the coal have decreased largely with rising reformation treatment temperature (according to FT-IR measurement). Specific surface area of the original coal of the Loy Yang coal was 138 m{sup 2}/g, while it has decreased largely to 73 m{sup 2}/g when the reformation temperature was raised to 350{degree}C. This is because of volatile components dissolving from the coal as tar and blocking the surface pores. 2 refs., 4 figs.

Characteristics of radiation temperature and radiosity coefficient by means of infrared radiometer. Sekigai hoshakei ni yoru zairyo hyomen no hosha tokusei ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Okamoto, Y; Kaminaga, F [Ibaraki University, Ibaraki (Japan). Faculty of Engineering; Ishii, T; Sato, K [Ibaraki University, Ibaraki (Japan); Kurokawa, T [NEC San-ei Instrumentsu Ltd., Tokyo (Japan)

1991-12-25

A radiation thermometer was applied to the measurement and analysis of radiation temperature of the material surface. In this paper, the characteristics of the radiation temperature and the radiosity coefficient of gray body materials are investigatied. An infrared radiometer was used, which detects radiation energy in the region between 8 and 13{mu}m of wavelength. This infared radiometer has a Hg-Cd-Te photon radiation sensor. The variation of emissivity was measured for the four kinds of non-metalic materials, i.e., graphite, carbon fiber composite, Si-SiC ceramic, and black paint spread on an aluminum plate. As a result, the relationship between material temperature and radiation energy was made clear. Furthermore, the space-dependent variation of the radiation temperature and the radiosity coefficient was derived from the two-dimensional CRT image of the infrared radiometer. Consequently, the emmisivity variation gave a maximum for the carbon fiber composite surface rich in irregularity, and decreased in the order of graphite, Si-SiC, and black paint. 7 refs., 15 figs.

Change of wettability of PTFE surface by sputter etching and excimer laser. Sputter etching oyobi excimer laser ni yoru PTFE hyomen no shinsuika

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, S. (Nitto Denko Corp., Osaka (Japan)); Kubo, U. (Kinki University, Osaka (Japan))

1994-06-20

The wettability of PTFE (polytetrafluoroethylene) surfaces was improved by sputter etching and excimer laser irradiation. In sputter etching, the PTFE surface was treated by reactive sputter etching with H2O gas to give active groups on the surface. In laser irradiation, the surface was irradiated in pure water by high-energy KrF excimer laser. As the surface wettability was evaluated with a contact angle to water, the contact angle decreased remarkably in both treatments resulting in a good improvement effect. In sputter etching, various new chemical bonds such as F-C=O, F2C-FC-O, F2C-C-O and C-O were observed because of a decrease in F and incorporation of oxygen. Such chemical bonds could be eliminated by ultraviolet ray irradiation, and the treated surface condition approached the initial condition after irradiation of 200 hours. In laser irradiation, it was suggested that C-F bonds were broken, and OH groups were added to the surface by dissociation of H2O to H and OH. 7 refs., 8 figs., 1 tab.

15 CFR 921.80 - Application information.

Science.gov (United States)

2010-01-01

... Standard Form 424 (Non-construction Program) constitutes the formal application for site selection, post... awards for preacquisition, acquisition and development, operation and management, and special education... agency regarding the application. (b) An original and two copies of the formal application must be...

Reconfigurable Multicore Architectures for Streaming Applications

NARCIS (Netherlands)

Smit, Gerardus Johannes Maria; Kokkeler, Andre B.J.; Rauwerda, G.K.; Jacobs, J.W.M.; Nicolescu, G.; Mosterman, P.J.

2009-01-01

This chapter addresses reconfigurable heterogenous and homogeneous multicore system-on-chip (SoC) platforms for streaming digital signal processing applications, also called DSP applications. In streaming DSP applications, computations can be specified as a data flow graph with streams of data items

49 CFR 262.11 - Application process.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Application process. 262.11 Section 262.11 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... IMPROVEMENT PROJECTS § 262.11 Application process. (a) All grant applications for opportunities funded under...

Enterprise Application Integration Using Java Technologies

Directory of Open Access Journals (Sweden)

Alexandru BARBULESCU

2006-01-01

Full Text Available The current article points out some of the tasks and challenges companies must face in order to integrate their computerized systems and applications and then to place them on the Web. Also, the article shows how the Java 2 Enterprise Edition Platform and architecture helps the Web integration of applications. By offering standardized integration contracts, J2EE Platform allows application servers to play a key role in the process of Web integration of the applications.

Dynamic random walks theory and applications

CERN Document Server

Guillotin-Plantard, Nadine

2006-01-01

The aim of this book is to report on the progress realized in probability theory in the field of dynamic random walks and to present applications in computer science, mathematical physics and finance. Each chapter contains didactical material as well as more advanced technical sections. Few appendices will help refreshing memories (if necessary!).· New probabilistic model, new results in probability theory· Original applications in computer science· Applications in mathematical physics· Applications in finance

Multimedia database retrieval technology and applications

CERN Document Server

Muneesawang, Paisarn; Guan, Ling

2014-01-01

This book explores multimedia applications that emerged from computer vision and machine learning technologies. These state-of-the-art applications include MPEG-7, interactive multimedia retrieval, multimodal fusion, annotation, and database re-ranking. The application-oriented approach maximizes reader understanding of this complex field. Established researchers explain the latest developments in multimedia database technology and offer a glimpse of future technologies. The authors emphasize the crucial role of innovation, inspiring users to develop new applications in multimedia technologies

Chemical Gas Sensors for Aerospace Applications

Science.gov (United States)

Hunter, Gary W.; Liu, C. C.

1998-01-01

Chemical sensors often need to be specifically designed (or tailored) to operate in a given environment. It is often the case that a chemical sensor that meets the needs of one application will not function adequately in another application. The more demanding the environment and specialized the requirement, the greater the need to adapt exiting sensor technologies to meet these requirements or, as necessary, develop new sensor technologies. Aerospace (aeronautic and space) applications are particularly challenging since often these applications have specifications which have not previously been the emphasis of commercial suppliers. Further, the chemical sensing needs of aerospace applications have changed over the years to reflect the changing emphasis of society. Three chemical sensing applications of particular interest to the National Aeronautics and Space Administration (NASA) which illustrate these trends are launch vehicle leak detection, emission monitoring, and fire detection. Each of these applications reflects efforts ongoing throughout NASA. As described in NASA's "Three Pillars for Success", a document which outlines NASA's long term response to achieve the nation's priorities in aerospace transportation, agency wide objectives include: improving safety and decreasing the cost of space travel, significantly decreasing the amount of emissions produced by aeronautic engines, and improving the safety of commercial airline travel. As will be discussed below, chemical sensing in leak detection, emission monitoring, and fire detection will help enable the agency to meet these objectives. Each application has vastly different problems associated with the measurement of chemical species. Nonetheless, the development of a common base technology can address the measurement needs of a number of applications.

The Management of the Citizen Oriented Applications

OpenAIRE

Ion IVAN; Bogdan VINTILĂ

2010-01-01

The context of the knowledge based society is presented. The new user requirements in the context of the new society are analyzed. Basic concepts regarding the citizen oriented applications are presented. Issues specific to the citizen oriented applications are presented. The development cycle of the citizen oriented applications is analyzed. The particular elements for developing citizen oriented applications are described. The quality concept for the citizen oriented applications is defined...

37 CFR 2.66 - Revival of abandoned applications.

Science.gov (United States)

2010-07-01

... Applicants § 2.66 Revival of abandoned applications. (a) The applicant may file a petition to revive an... for filing a petition to revive an application abandoned because the applicant did not timely respond... proposed response. (c) The requirements for filing a petition to revive an application abandoned because...

14 CFR 413.13 - Complete application.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Complete application. 413.13 Section 413.13 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING LICENSE APPLICATION PROCEDURES § 413.13 Complete application. The FAA's acceptance of an...

7 CFR 1416.703 - Application process.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Application process. 1416.703 Section 1416.703 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT... PROGRAMS 2005 Hurricane Tree Assistance Program § 1416.703 Application process. (a) A complete application...

7 CFR 1416.103 - Application process.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Application process. 1416.103 Section 1416.103 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT... PROGRAMS Livestock Compensation Program § 1416.103 Application process. (a) Applicants must submit to CCC...

Costs of emission-reducing manure application

NARCIS (Netherlands)

Huijsmans, J.F.M.; Verwijs, B.; Rodhe, L.; Smith, K.

2004-01-01

Favourable economics of handling and application of manure are of fundamental importance to encourage the implementation of emission-reducing application techniques. The economics of manure application depend on the costs of the equipment and the time to carry out the field operation. In this study

Applications of symbolic algebraic computation

International Nuclear Information System (INIS)

Brown, W.S.; Hearn, A.C.

1979-01-01

This paper is a survey of applications of systems for symbomic algebraic computation. In most successful applications, calculations that can be taken to a given order by hand are then extended one or two more orders by computer. Furthermore, with a few notable exceptins, these applications also involve numerical computation in some way. Therefore the authors emphasize the interface between symbolic and numerical computation, including: 1. Computations with both symbolic and numerical phases. 2. Data involving both the unpredictible size and shape that typify symbolic computation and the (usually inexact) numerical values that characterize numerical computation. 3. Applications of one field to the other. It is concluded that the fields of symbolic and numerical computation can advance most fruitfully in harmony rather than in competition. (Auth.)

Grant Application Development, Submission, Review, & Award

Science.gov (United States)

This infographic shows the National Cancer Institute general timeline progression through Grant Application Development, Submission, Review, and Award Infographic. In the first month, Applicant prepares and submits Grant Application to Grants.gov in response to FOA. In month two, The Center for Scientific Review (CSR) assigns applications that fall under the category of R01s, etc. to a Scientific Review Group (SRG) or the CSR assigns applications that fall under the category of Program Projects and Center Grants to NCI Division of Extramural Activities (DEA). Months four through five: First-level review by Scientific Review Group (SRG) for Scientific Merit: SRG assigns Impact Scores. Month five Summary Sstatements are prepared and are available to NCI Program staff and applicants. Month six, second-level review by National Cancer Advisory board (NCAB) for NCI Funding determination begins. NCAB makes recommendation to NCI Director, NCI develops funding plan, Applications selected for Funding, “Paylists” forwarded to Office of Grant Administration (OGA). Month ten, Award Negotiations and Issuance: Award issued, Award received by Institution, and Investigator begins work. www.cancer.gov Icons made by Freepik from http://www.flaticon.com is licensed by CC BY3.0

Cloud computing for data-intensive applications

CERN Document Server

Li, Xiaolin

2014-01-01

This book presents a range of cloud computing platforms for data-intensive scientific applications. It covers systems that deliver infrastructure as a service, including: HPC as a service; virtual networks as a service; scalable and reliable storage; algorithms that manage vast cloud resources and applications runtime; and programming models that enable pragmatic programming and implementation toolkits for eScience applications. Many scientific applications in clouds are also introduced, such as bioinformatics, biology, weather forecasting and social networks. Most chapters include case studie

Integer programming theory, applications, and computations

CERN Document Server

Taha, Hamdy A

1975-01-01

Integer Programming: Theory, Applications, and Computations provides information pertinent to the theory, applications, and computations of integer programming. This book presents the computational advantages of the various techniques of integer programming.Organized into eight chapters, this book begins with an overview of the general categorization of integer applications and explains the three fundamental techniques of integer programming. This text then explores the concept of implicit enumeration, which is general in a sense that it is applicable to any well-defined binary program. Other

Advertising on mobile applications

OpenAIRE

Sobolevsky, Alexandr

2015-01-01

The article analyzes the new method of mobile advertising. Advertising in mobile applications - a subspecies of mobile marketing, where advertising is distributed using mobile phones and smartphones. Ad placement is going on inside of applications and games for smartphones. It has a high potential due to the large number of mobile phone users (over 6.5 billion in 2013).

Rayleigh reciprocity relations: Applications

International Nuclear Information System (INIS)

Lin Ju; Li Xiao-Lei; Wang Ning

2016-01-01

Classical reciprocity relations have wide applications in acoustics, from field representation to generalized optical theorem. In this paper we introduce our recent results on the applications and generalization of classical Rayleigh reciprocity relation: higher derivative reciprocity relations as a generalization of the classical one and a theoretical proof on the Green’s function retrieval from volume noises. (special topic)

Superhydrophobic Materials for Biomedical Applications

Science.gov (United States)

Colson, Yolonda L.; Grinstaff, Mark W.

2016-01-01

Superhydrophobic surfaces are actively studied across a wide range of applications and industries, and are now finding increased use in the biomedical arena as substrates to control protein adsorption, cellular interaction, and bacterial growth, as well as platforms for drug delivery devices and for diagnostic tools. The commonality in the design of these materials is to create a stable or metastable air state at the material surface, which lends itself to a number of unique properties. These activities are catalyzing the development of new materials, applications, and fabrication techniques, as well as collaborations across material science, chemistry, engineering, and medicine given the interdisciplinary nature of this work. The review begins with a discussion of superhydrophobicity, and then explores biomedical applications that are utilizing superhydrophobicity in depth including material selection characteristics, in vitro performance, and in vivo performance. General trends are offered for each application in addition to discussion of conflicting data in the literature, and the review concludes with the authors’ future perspectives on the utility of superhydrophobic surfaces for biomedical applications. PMID:27449946

7 CFR 1416.204 - Application process.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Application process. 1416.204 Section 1416.204 Agriculture Regulations of the Department of Agriculture (Continued) COMMODITY CREDIT CORPORATION, DEPARTMENT... PROGRAMS Livestock Indemnity Program II § 1416.204 Application process. (a) Applicants must submit to CCC a...

7 CFR 1709.114 - Application process.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Application process. 1709.114 Section 1709.114 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF... Application process. The RUS will request applications for high energy cost grants on a competitive basis by...

7 CFR 760.1105 - Application process.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Application process. 760.1105 Section 760.1105 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF... Application process. (a) Participants must submit to FSA: (1) A completed application in accordance with § 760...

7 CFR 760.907 - Application process.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Application process. 760.907 Section 760.907 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF... Application process. (a) To apply for 2005-2007 LIP, submit a completed application to the administrative...

49 CFR 80.7 - Application process.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Application process. 80.7 Section 80.7 Transportation Office of the Secretary of Transportation CREDIT ASSISTANCE FOR SURFACE TRANSPORTATION PROJECTS § 80.7 Application process. (a) Public and private applicants for credit assistance under this part...

7 CFR 1467.5 - Application procedures.

Science.gov (United States)

2010-01-01

... OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS WETLANDS RESERVE PROGRAM § 1467.5 Application... Application for Participation in the WRP. (b) Preliminary agency actions. By filing an Application for... enhance the probability of enrollment in WRP, a landowner may voluntarily offer to accept a lesser payment...

Superconductivity - applications

International Nuclear Information System (INIS)

The paper deals with the following subjects: 1) Electronics and high-frequency technology, 2) Superconductors for energy technology, 3) Superconducting magnets and their applications, 4) Electric machinery, 5) Superconducting cables. (WBU) [de

Wireless Intelligent Sensors Management Application Protocol-WISMAP

Directory of Open Access Journals (Sweden)

Antonio Jesus Yuste-Delgado

2010-09-01

Full Text Available Although many recent studies have focused on the development of new applications for wireless sensor networks, less attention has been paid to knowledge-based sensor nodes. The objective of this work is the development in a real network of a new distributed system in which every sensor node can execute a set of applications, such as fuzzy ruled-base systems, measures, and actions. The sensor software is based on a multi-agent structure that is composed of three components: management, application control, and communication agents; a service interface, which provides applications the abstraction of sensor hardware and other components; and an application layer protocol. The results show the effectiveness of the communication protocol and that the proposed system is suitable for a wide range of applications. As real world applications, this work presents an example of a fuzzy rule-based system and a noise pollution monitoring application that obtains a fuzzy noise indicator.

Nonlinear Optics and Applications

Science.gov (United States)

Abdeldayem, Hossin A. (Editor); Frazier, Donald O. (Editor)

2007-01-01

Nonlinear optics is the result of laser beam interaction with materials and started with the advent of lasers in the early 1960s. The field is growing daily and plays a major role in emerging photonic technology. Nonlinear optics play a major role in many of the optical applications such as optical signal processing, optical computers, ultrafast switches, ultra-short pulsed lasers, sensors, laser amplifiers, and many others. This special review volume on Nonlinear Optics and Applications is intended for those who want to be aware of the most recent technology. This book presents a survey of the recent advances of nonlinear optical applications. Emphasis will be on novel devices and materials, switching technology, optical computing, and important experimental results. Recent developments in topics which are of historical interest to researchers, and in the same time of potential use in the fields of all-optical communication and computing technologies, are also included. Additionally, a few new related topics which might provoke discussion are presented. The book includes chapters on nonlinear optics and applications; the nonlinear Schrodinger and associated equations that model spatio-temporal propagation; the supercontinuum light source; wideband ultrashort pulse fiber laser sources; lattice fabrication as well as their linear and nonlinear light guiding properties; the second-order EO effect (Pockels), the third-order (Kerr) and thermo-optical effects in optical waveguides and their applications in optical communication; and, the effect of magnetic field and its role in nonlinear optics, among other chapters.

JPSS Operational and Research Applications: The Pathway from Observations to Applications to Information.

Science.gov (United States)

Goldberg, M.; Sjoberg, W.; Layns, A. L.

2017-12-01

Applications of satellite data are paramount to transform science and technology to product and services which are used in critical decision making. For the satellite community, good representations of technology are the satellite sensors, while science provides the instrument calibration and derived geophysical parameters. Weather forecasting is an application of the science and technology provided by remote sensing satellites. The Joint Polar Satellite System, which includes the Suomi National Polar-orbiting Partnership (S-NPP) provides formidable science and technology to support many applications and includes support to 1) weather forecasting - data from the JPSS Cross-track Infrared Sounder (CrIS) and the Advanced Technology Microwave Sounder (ATMS) are used to forecast weather events out to 7 days - nearly 85% of all data used in weather forecasting are from polar orbiting satellites; 2) environmental monitoring -data from the JPSS Visible Infrared Imager Radiometer Suite (VIIRS) are used to monitor the environment including the health of coastal ecosystems, drought conditions, fire, smoke, dust, snow and ice, and the state of oceans, including sea surface temperature and ocean color; and 3) climate monitoring - data from JPSS instruments, including OMPS and CERES will provide continuity to climate data records established using NOAA POES and NASA Earth Observing System (EOS) satellite observations. To bridge the gap between products and applications, the JPSS Program has established the Proving Ground and Risk Reduction (PGRR) Program to identify opportunities to maximize the operational application of current JPSS capabilities. The PGRR Program also helps identify and evaluate the use of JPSS capabilities for new operational missions. New PGRR initiatives focus on hydrological, Arctic, data assimilation, atmospheric chemistry, ocean ecosystem applications. At the conference, the benefits of JPSS data on societal benefits will be presented along with results

Application of Text Analytics to Extract and Analyze Material–Application Pairs from a Large Scientific Corpus

Directory of Open Access Journals (Sweden)

Nikhil Kalathil

2018-01-01

Full Text Available When assessing the importance of materials (or other components to a given set of applications, machine analysis of a very large corpus of scientific abstracts can provide an analyst a base of insights to develop further. The use of text analytics reduces the time required to conduct an evaluation, while allowing analysts to experiment with a multitude of different hypotheses. Because the scope and quantity of metadata analyzed can, and should, be large, any divergence from what a human analyst determines and what the text analysis shows provides a prompt for the human analyst to reassess any preliminary findings. In this work, we have successfully extracted material–application pairs and ranked them on their importance. This method provides a novel way to map scientific advances in a particular material to the application for which it is used. Approximately 438,000 titles and abstracts of scientific papers published from 1992 to 2011 were used to examine 16 materials. This analysis used coclustering text analysis to associate individual materials with specific clean energy applications, evaluate the importance of materials to specific applications, and assess their importance to clean energy overall. Our analysis reproduced the judgments of experts in assigning material importance to applications. The validated methods were then used to map the replacement of one material with another material in a specific application (batteries.

Project Assessment Skills Web Application

Science.gov (United States)

Goff, Samuel J.

2013-01-01

The purpose of this project is to utilize Ruby on Rails to create a web application that will replace a spreadsheet keeping track of training courses and tasks. The goal is to create a fast and easy to use web application that will allow users to track progress on training courses. This application will allow users to update and keep track of all of the training required of them. The training courses will be organized by group and by user, making readability easier. This will also allow group leads and administrators to get a sense of how everyone is progressing in training. Currently, updating and finding information from this spreadsheet is a long and tedious task. By upgrading to a web application, finding and updating information will be easier than ever as well as adding new training courses and tasks. Accessing this data will be much easier in that users just have to go to a website and log in with NDC credentials rather than request the relevant spreadsheet from the holder. In addition to Ruby on Rails, I will be using JavaScript, CSS, and jQuery to help add functionality and ease of use to my web application. This web application will include a number of features that will help update and track progress on training. For example, one feature will be to track progress of a whole group of users to be able to see how the group as a whole is progressing. Another feature will be to assign tasks to either a user or a group of users. All of these together will create a user friendly and functional web application.

Augmented reality for Android application development

CERN Document Server

Grubert, Jens

2013-01-01

A step-by-step tutorial-based guide aimed at giving you hands-on practical experience to develop AR applications for Android.Augmented Reality for Android Application Development is for Android mobile application developers who are familiar with Android Development Tools and deployment, JMonkeyEngine, and the Vuforia SDK.

8 CFR 1240.63 - Application process.

Science.gov (United States)

2010-01-01

... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Application process. 1240.63 Section 1240.63 Aliens and Nationality EXECUTIVE OFFICE FOR IMMIGRATION REVIEW, DEPARTMENT OF JUSTICE IMMIGRATION... Application process. (a) Form and fees. Except as provided in paragraph (b) of this section, the application...

49 CFR 390.3 - General applicability.

Science.gov (United States)

2010-10-01

... SAFETY REGULATIONS; GENERAL General Applicability and Definitions § 390.3 General applicability. Link to... accessories required by this subchapter shall be maintained in compliance with all applicable performance and... rules in this subchapter do not apply to— (1) All school bus operations as defined in § 390.5; (2...

24 CFR 599.401 - Ranking of applications.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Ranking of applications. 599.401... Communities § 599.401 Ranking of applications. (a) Ranking order. Rural and urban applications will be ranked... applications ranked first. (b) Separate ranking categories. After initial ranking, both rural and urban...

7 CFR 4280.128 - Application and documentation.

Science.gov (United States)

2010-01-01

... feasibility study. (x) Lender's complete comprehensive written analysis in accordance with § 4280.139. (xi) A... applicable. (iii) Business-level feasibility study for renewable energy systems. For each application for a... agreements. Applications submitted under paragraph (c) of this section must use Form RD 4279-1A, “Application...

Branding through mobile applications : - A case study of Swedish campaign applications

OpenAIRE

Vikström, Henrik; Zheng, Caroline

2013-01-01

We are a few years into a paradigm shift where mobile Internet usage around the world is increasing fast. Smartphones have in Sweden become the device a substantial proportion of the population have, and companies have seen them as a new way to communicate with consumers. This thesis is a case study of four smartphone applications issued by companies in brand building purposes. The applications are King of the slope by Vattenfall, Körklar? by SalusAnsvar, McWrap Go&Get by McDonalds and M...

A Customizable GeantV Calorimeter Application

CERN Document Server

Schmitz, Ryan; Vallecorsa, Sofia; Novak, Mihaly; CERN. Geneva. EP Department

2017-01-01

A customizable calorimeter application was written in GeantV. This application includes a GeantV-native detector construction file as well as GeantV-native physics models and new data collection structures. Including these features makes this one of the first examples of a completely standalone GeantV application. A comparison to Geant4 was made which showed the consistency of the GeantV-native physics models included in this example. Finally, the workflow improvements made by the creation of this application are described.

Expert Oracle Application Express Plug-Ins

CERN Document Server

D'Souza, Martin Giffy

2011-01-01

Expert Oracle Application Express Plugins is your "go to" book on the groundbreaking plugin architecture introduced in Oracle Application Express 4.0. Using the new APEX functionality, you can create well-packaged, documented, reusable components and reliably leverage your coding investments across many applications. Components you create can define new item and region types, specify validation processes, and present dynamic actions to client applications. You can design innovative and colorful ways to display information, such as displaying the temperature using an image of a thermometer, or

Biological applications of the Moessbauer effect; Applications de l'effet Mossbauer a la biologie

Energy Technology Data Exchange (ETDEWEB)

Boulay, P [CEA Bruyeres-le-Chatel, 91 (France)

1968-12-01

The applications of Moessbauer spectrometry in the fields of physics and chemistry have been increasing steadily since its discovery in 1958. Attempts have been made to find applications in biology. Two possibilities of investigation exist in this field: the study of mechanical or vibrational movements in certain animal organs, and the determination of the organic molecular structure in a biological context. An example is given of each of these possibilities. (author) [French] Les applications de la spectrometrie Mossbauer dans le domaine de la physique et de la chimie n'ont cesse de progresser depuis sa decouverte en 1958. Des essais d'application a la biologie ont ete entrepris. Dans ce domaine il existe deux possibilites d'investigation: l'etude des mouvements mecaniques ou vibratoires de certaines organes d'animaux, et la determination de la structure moleculaire organique a destinee biologique. Un exemple est donne de chacune de ces possibilites. (auteur)

Game theory and its applications

CERN Document Server

Matsumoto, Akio

2015-01-01

This book integrates the fundamentals, methodology and major application fields of noncooperative and cooperative games, including conflict resolution. It includes a wide range of applications in many different areas, from economics to homeland security.

Industrial applications of radiation technology

International Nuclear Information System (INIS)

Sarma, K.S.S.

2012-01-01

During the past one decade, Radiation Technology applications utilizing gamma radiation and high energy electrons have made a big way into the Indian industry bringing quality and value-added products in a more environment-friendly way. While radiation sterilization of health care products, hygienization of food materials, modification of polymer materials etc. are established as successful processes world wide including India, new applications are emerging especially in the field of environmental remediation. Two types of installations viz. gamma irradiators and high energy electron accelerators are in use right now to carry out such applications. The aim of the talk is to put forward before the audience about the potential applications developed in India and abroad, role of Department of Atomic Energy and current status of radiation processing for industrial utilization

Advanced number theory with applications

CERN Document Server

Mollin, Richard A

2009-01-01

Algebraic Number Theory and Quadratic Fields Algebraic Number Fields The Gaussian Field Euclidean Quadratic Fields Applications of Unique Factorization Ideals The Arithmetic of Ideals in Quadratic Fields Dedekind Domains Application to Factoring Binary Quadratic Forms Basics Composition and the Form Class Group Applications via Ambiguity Genus Representation Equivalence Modulo p Diophantine Approximation Algebraic and Transcendental Numbers Transcendence Minkowski's Convex Body Theorem Arithmetic Functions The Euler-Maclaurin Summation Formula Average Orders The Riemann zeta-functionIntroduction to p-Adic AnalysisSolving Modulo pn Introduction to Valuations Non-Archimedean vs. Archimedean Valuations Representation of p-Adic NumbersDirichlet: Characters, Density, and Primes in Progression Dirichlet Characters Dirichlet's L-Function and Theorem Dirichlet DensityApplications to Diophantine Equations Lucas-Lehmer Theory Generalized Ramanujan-Nagell Equations Bachet's Equation The Fermat Equation Catalan and the A...

7 CFR 1900.102 - Applicable law.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Applicable law. 1900.102 Section 1900.102 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS-COOPERATIVE... GENERAL Applicability of Federal Law § 1900.102 Applicable law. Loans made by FmHA or its successor agency...

77 FR 58368 - Notice of Application

Science.gov (United States)

2012-09-20

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Notice of Application Corpus Christi... application in Docket No. CP12-507-000, under section 3(a) of the Natural Gas Act (NGA), as amended, and parts... Christi LNG, LLC LNG import terminal. In the same application, Cheniere Corpus Christi Pipeline, L.P. (CCP...

14 CFR 155.3 - Applicable law.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Applicable law. 155.3 Section 155.3... RELEASE OF AIRPORT PROPERTY FROM SURPLUS PROPERTY DISPOSAL RESTRICTIONS § 155.3 Applicable law. (a... transfer to the requirements of applicable law. Based on the laws cited in this paragraph, the...

10 CFR 611.100 - Eligible applicant.

Science.gov (United States)

2010-01-01

... manufacturer that manufactured in model year 2005, vehicles subject to the CAFE requirements, the applicant... the most recent year for which final CAFE compliance data is available, at the time of application, is... the MY 2005 final CAFE compliance data. (2) If the applicant is an automobile manufacturer that did...

18 CFR 5.18 - Application content.

Science.gov (United States)

2010-04-01

... application are true to the best of (his or her) knowledge or belief. The undersigned Applicant(s) has (have... monitoring of existing project instrumentation and any proposed changes; and (4) A statement indicating... Section by the person filing, an officer thereof, or other person having knowledge of the matters set...

21 CFR 60.32 - Applicant response to petition.

Science.gov (United States)

2010-04-01

... PATENT TERM RESTORATION Due Diligence Petitions § 60.32 Applicant response to petition. (a) The applicant... applicant acted with due diligence during the regulatory review period. The applicant's response may include... term restoration application, due diligence petition, and FDA records. ...

A Holistic Approach to Securing Web Applications

OpenAIRE

Stankovic, Srdjan; Simic, Dejan

2010-01-01

Protection of Web applications is an activity that requires constant monitoring of security threats as well as looking for solutions in this field. Since protection has moved from the lower layers of OSI models to the application layer and having in mind the fact that 75% of all the attacks are performed at the application layer, special attention should be paid to the application layer. It is possible to improve protection of Web application on the level of the system architecture by introdu...

75 FR 61474 - Juneau Hydropower, Inc.; Notice of Intent To File License Application, Filing of Pre-Application...

Science.gov (United States)

2010-10-05

... Hydropower, Inc.; Notice of Intent To File License Application, Filing of Pre-Application Document, and....: 13563-001. c. Dated Filed: July 28, 2010. d. Submitted By: Juneau Hydropower, Inc. e. Name of Project... Commission's regulations. h. Potential Applicant Contact: Duff W. Mitchell, Juneau Hydropower, Inc., P.O. Box...

42 CFR 50.201 - Applicability.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Applicability. 50.201 Section 50.201 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS POLICIES OF GENERAL APPLICABILITY... Public Health Service. ...

Teleradiology applications with DICOM-e-mail

International Nuclear Information System (INIS)

Weisser, G.; Ruggiero, S.; Runa, A.; Engelmann, U.; Schroeter, A.; Baur, S.; Walz, M.

2007-01-01

For the connection of several partners to a Dicom-e-mail based teleradiology network concepts were developed to allow the integration of different teleradiology applications. The organisational and technical needs for such an integration were analysed. More than 60 institutions including 23 hospitals in the Rhein-Neckar-Region, Germany were connected. The needed functionality was grouped in six teleradiology applications (emergency consultation, tele-guided examinations, expert consultations, cooperative work, scientific cooperations and homework with on call services) and their technical and organisational needs according to availability, speed of transfer, workflow definitions and data security needs was analysed. For the local integration of teleradiology services the setup and workflow is presented for a standalone teleradiology workstation and a server based teleradiology gateway. The line type needed for different groups of applications and users is defined. The security concept and fallback strategies are laid out, potential security problems and sources of errors are discussed. The specialties for the emergency teleradiology application are presented. The DICOM-e-mail protocol is a flexible and powerful protocol that can be used for a variety of teleradiology applications. It can meet the conditions for emergency applications but is limited if synchronous applications like teleconferences are needed. (orig.)

Mobile Health Applications in Digital Life

Directory of Open Access Journals (Sweden)

Deniz Sezgin

2014-12-01

Full Text Available With the effect of recent rapid developments in communication technologies, every day, various new experiences are introduced into daily life practices. The spread of smart devices and the increase in their accessibility causes a reorganization of the information concerning the daily life via smart phones, tablets, all peripheral devices which can communicate with them, and applications which are installed in these devices. There is also a rapid development in the field of health which has an important position among the fastest growing fields in digital life; and the information and possibilities which are provided by mobile health applications to people who are not health care professionals are also developing rapidly. In this study, health applications which are developed for IOS operating system and presented to the consumers through Apple App-Store on Apple I-Phone and I-Pad mobile devices are examined in order to reveal what mobile health applications as new practices of daily life offer in terms of health and how they direct the individuals towards healthy behaviour; and some of the most frequently used free applications are included as sample applications. Mobile health applications offer many conveniences to the patients or the caretakers of patients such as reminding about medicines or treatments, and administering and monitoring simple treatments.

47 CFR 1.2003 - Applications affected.

Science.gov (United States)

2010-10-01

... Abuse Act of 1988 § 1.2003 Applications affected. The certification required by § 1.2002 must be filed... and/or Response Station(s) and Low Power Relay Station(s) License; FCC 340Application for Construction... a Low Power Television Station; FCC 346Application for Authority to Construct or Make Changes in a...

76 FR 2360 - Notice of Application

Science.gov (United States)

2011-01-13

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Notice of Application January 5, 2011... application pursuant to sections 7(b) and 7(c) of the Natural Gas Act (NGA) for the proposed New Jersey-New... set forth in the application which is on file with the Commission and open to public inspection. The...

Mobile Application Identification based on Hidden Markov Model

Directory of Open Access Journals (Sweden)

Yang Xinyan

2018-01-01

Full Text Available With the increasing number of mobile applications, there has more challenging network management tasks to resolve. Users also face security issues of the mobile Internet application when enjoying the mobile network resources. Identifying applications that correspond to network traffic can help network operators effectively perform network management. The existing mobile application recognition technology presents new challenges in extensibility and applications with encryption protocols. For the existing mobile application recognition technology, there are two problems, they can not recognize the application which using the encryption protocol and their scalability is poor. In this paper, a mobile application identification method based on Hidden Markov Model(HMM is proposed to extract the defined statistical characteristics from different network flows generated when each application starting. According to the time information of different network flows to get the corresponding time series, and then for each application to be identified separately to establish the corresponding HMM model. Then, we use 10 common applications to test the method proposed in this paper. The test results show that the mobile application recognition method proposed in this paper has a high accuracy and good generalization ability.

Microwave mixer technology and applications

CERN Document Server

Henderson, Bert

2013-01-01

Although microwave mixers play a critical role in wireless communication and other microwave applications employing frequency conversion circuits, engineers find that most books on this subject emphasize theoretical aspects, rather than practical applications. That's about to change with the forthcoming release of Microwave Mixer Technology and Applications. Based on a review of over one thousand patents on mixers and frequency conversion, authors Bert Henderson and Edmar Camargo have written a comprehensive book for mixer designers who want solid ideas for solving their own design challenges.

Luminescent nanodiamonds for biomedical applications.

Science.gov (United States)

Say, Jana M; van Vreden, Caryn; Reilly, David J; Brown, Louise J; Rabeau, James R; King, Nicholas J C

2011-12-01

In recent years, nanodiamonds have emerged from primarily an industrial and mechanical applications base, to potentially underpinning sophisticated new technologies in biomedical and quantum science. Nanodiamonds are relatively inexpensive, biocompatible, easy to surface functionalise and optically stable. This combination of physical properties are ideally suited to biological applications, including intracellular labelling and tracking, extracellular drug delivery and adsorptive detection of bioactive molecules. Here we describe some of the methods and challenges for processing nanodiamond materials, detection schemes and some of the leading applications currently under investigation.

Quality PSA for PSA applications

International Nuclear Information System (INIS)

Carska, K.; Rybar, J.

2012-03-01

The safety guideline defines with more precision Nuclear Regulatory Authority of the Slovak Republic requirements of the quality of probabilistic safety assessment (PSA) for PSA application. Term of quality of PSA is explained in detail. Procedure for determining the quality of PSA is provided. The categorization of PSA study according the quality of PSA is suggested. A comprehensive list of PSA applications for nuclear facilities is provided. What technical features of a PSA should be satisfied to support the PSA applications of interest is stated. (authors)

Stereochemistry basic concepts and applications

CERN Document Server

Nógrádi, M

2013-01-01

Stereochemistry: Basic Concepts and Applications is a three-chapter text that introduces the basic principles and concepts of stereochemistry, as well as its application to organic chemistry application.Chapter 1 describes first the stereochemistry of the ground state, specifically the configuration and conformation of organic compounds, as well as the most important methods for its investigation. This chapter also deals with the kinetics of conformational changes and provides an overview of the so-called ""applied stereochemistry"". Chapter 2 focuses on the analysis of the internal motions of

Study on fabrication methods of composite structures (1st. report); Joule effect curing of CFRP composite structures and its application to bonding and repair. Fukugo zai kozo no seikei kako ho ni kansuru kenkyu (Dai 1po); CFRP kozo no Joule koka wo riyo shita cure ho to setsugoter dot hoshu e no oyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Moriya, K. (The National Defense Academy, Kanagawa (Japan))

1990-07-05

A method for curing CFRP composite structures by using Joule effect is presented. Due to the presence of fiber to fiber contact, CFRP composites and their prepregs exhibit electrical conductivity in the direction transverse to fibers as well as in the fiber direction, and they can be considered as electrically homogeneous on a gross scale. Therefore, passing an electric current through a CFRP prepreg, it is self-heated due to the Joule effect. Feedback current control maintains the prepreg temperature at a desired level and makes the prepreg be cured by a specified cure cycle. Experimental verifiactions have been carried out to demonstrate the feasibility of the present technique. The applications to the bonding of CFRP components and to the patch repairs of effective CFRP structure are also described. 12 refs., 12 figs.

Superconductivity basics and applications to magnets

CERN Document Server

Sharma, R G

2015-01-01

This book presents the basics and applications of superconducting magnets. It explains the phenomenon of superconductivity, theories of superconductivity, type II superconductors and high-temperature cuprate superconductors. The main focus of the book is on the application to superconducting magnets to accelerators and fusion reactors and other applications of superconducting magnets. The thermal and electromagnetic stability criteria of the conductors and the present status of the fabrication techniques for future magnet applications are addressed. The book is based on the long experience of the author in studying superconducting materials, building magnets and numerous lectures delivered to scholars. A researcher and graduate student will enjoy reading the book to learn various aspects of magnet applications of superconductivity. The book provides the knowledge in the field of applied superconductivity in a comprehensive way.

Mobile phone application for mathematics learning

Science.gov (United States)

Supandi; Ariyanto, L.; Kusumaningsih, W.; Aini, A. N.

2018-03-01

This research was aimed to determine the role of the use of Mobile Phone Application (MPA) in Mathematics learning. The Pre and Post-test Quasy Experiment method was applied. The Pre-test was performed to understand the initial capability. In contrast, the Post-test was selected to identify changes in student ability after they were introduced to the application of Mobile Technology. Student responses to the use of this application were evaluated by a questionnaire. Based on the questionnaire, high scores were achieved, indicating the student's interest in this application. Also, learning results showed significant improvement in the learning achievement and the student learning behaviour. It was concluded that education supported by the MPA application gave a positive impact on learning outcomes as well as learning atmosphere both in class and outside the classroom.

Manure application and ammonia volatilization

NARCIS (Netherlands)

Huijsmans, J.F.M.

2003-01-01

Keywords: manure application, ammonia volatilization, environmental conditions, application technique, incorporation technique, draught force, work organization, costs Livestock manure applied on farmland is an important source of ammonia (NH3) volatilization, and NH3 is a major atmospheric

Zirconia in biomedical applications.

Science.gov (United States)

Chen, Yen-Wei; Moussi, Joelle; Drury, Jeanie L; Wataha, John C

2016-10-01

The use of zirconia in medicine and dentistry has rapidly expanded over the past decade, driven by its advantageous physical, biological, esthetic, and corrosion properties. Zirconia orthopedic hip replacements have shown superior wear-resistance over other systems; however, risk of catastrophic fracture remains a concern. In dentistry, zirconia has been widely adopted for endosseous implants, implant abutments, and all-ceramic crowns. Because of an increasing demand for esthetically pleasing dental restorations, zirconia-based ceramic restorations have become one of the dominant restorative choices. Areas covered: This review provides an updated overview of the applications of zirconia in medicine and dentistry with a focus on dental applications. The MEDLINE electronic database (via PubMed) was searched, and relevant original and review articles from 2010 to 2016 were included. Expert commentary: Recent data suggest that zirconia performs favorably in both orthopedic and dental applications, but quality long-term clinical data remain scarce. Concerns about the effects of wear, crystalline degradation, crack propagation, and catastrophic fracture are still debated. The future of zirconia in biomedical applications will depend on the generation of these data to resolve concerns.

Nanofiber Manufacture, Properties, and Applications

International Nuclear Information System (INIS)

Lin, T.; Lukas, D.; Bhat, G.S.

2013-01-01

Nano fibers have shown many unique characteristics and enormous application potential in widely diverse areas. While considerable research has been conducted on exploring the properties and applications of nano fibers over the decade, the technology development for large-scale production of nano fibers has been hampered, which slows down the wide applications of nano fibers in practice. This special issue focuses on the recent progress in emerging nano fiber production techniques, such as needle less electro spinning, and novel properties and applications of nano fibers. It also covers unusual methods to process natural materials into nano fibrous materials. The special issue consists of four review articles and eighteen research papers. One review paper presents an overview of the recent developments in needle less electro spinning and the influences of needle less spinnerets on electro spinning process, nano fiber quality and productivity. The review also points out the challenges remaining for further research in this area. Other three reviews separately summarize the preparation, characterization and applications of ZnO nano wires and the applications of carbon nano fibers for neural electrical/chemical interfaces and for cement reinforcement. The research articles report new results of needle less electro spinning techniques, and novel methods to make bi component nano fibers, porous nano fibers, nano fiber hydrogel and chitin nan ofibrils. As Guest Editors for this special issue, we are pleased to see the progress in the applications of nano fibers, especially for sound absorption and for protective clothing, as well as the antibacterial properties of titanate nano fibers. We hope this special issue will promote further development of large-scale economically feasible nano fiber-making technologies, and also contribute to the wide use of nano fibers. We also hope that the articles collected in this special issue are well-received by the reader.

Web-based control application using WebSocket

International Nuclear Information System (INIS)

Furukawa, Y.

2012-01-01

The WebSocket allows asynchronous full-duplex communication between a Web-based (i.e. Java Script-based) application and a Web-server. WebSocket started as a part of HTML5 standardization but has now been separated from HTML5 and has been developed independently. Using WebSocket, it becomes easy to develop platform independent presentation layer applications for accelerator and beamline control software. In addition, a Web browser is the only application program that needs to be installed on client computer. The WebSocket-based applications communicate with the WebSocket server using simple text-based messages, so WebSocket is applicable message-based control system like MADOCA, which was developed for the SPring-8 control system. A simple WebSocket server for the MADOCA control system and a simple motor control application were successfully made as a first trial of the WebSocket control application. Using Google-Chrome (version 13.0) on Debian/Linux and Windows 7, Opera (version 11.0) on Debian/Linux and Safari (version 5.0.3) on Mac OS X as clients, the motors can be controlled using a WebSocket-based Web-application. Diffractometer control application use in synchrotron radiation diffraction experiment was also developed. (author)

Rural applications of Advanced Traveler Information Systems : evaluation of satellite communications systems for mayday applications

Science.gov (United States)

This report documents the results of an evaluation of satellite communication systems for mayday applications conducted as part of the Rural Applications of Advanced Traveler Information Systems (ATIS) study. It focuses on satellite communications sy...

42 CFR 7.1 - Applicability.

Science.gov (United States)

2010-10-01

... BIOLOGICAL STANDARDS AND BIOLOGICAL PREPARATIONS § 7.1 Applicability. The provisions of this part are applicable to private entities requesting from the Centers for Disease Control (CDC) reference biological standards and biological preparations for use in their laboratories. ...

Real world data mining applications

CERN Document Server

Abou-Nasr, Mahmoud; Stahlbock, Robert; Weiss, Gary M

2014-01-01

Data mining applications range from commercial to social domains, with novel applications appearing swiftly; for example, within the context of social networks. The expanding application sphere and social reach of advanced data mining raise pertinent issues of privacy and security. Present-day data mining is a progressive multidisciplinary endeavor. This inter- and multidisciplinary approach is well reflected within the field of information systems. The information systems research addresses software and hardware requirements for supporting computationally and data-intensive applications. Furthermore, it encompasses analyzing system and data aspects, and all manual or automated activities. In that respect, research at the interface of information systems and data mining has significant potential to produce actionable knowledge vital for corporate decision-making. The aim of the proposed volume is to provide a balanced treatment of the latest advances and developments in data mining; in particular, exploring s...

Trends in Mobile Application Development

Science.gov (United States)

Holzer, Adrian; Ondrus, Jan

Major software companies, such as Apple and Google, are disturbing the relatively safe and established actors of the mobile application business. These newcomers have caused significant structural changes by imposing and enforcing their own rules for the future of mobile application development. The implications of these changes do not only concern the mobile network operators and mobile phone manufacturers. This changed environment also brings additional opportunities and constraints for current mobile application developers. Therefore, developers need to assess what their options are and how they can take advantages of these current trends. In this paper, we take a developer’s perspective in order to explore how the structural changes will influence the mobile application development markets. Moreover, we discuss what aspects developers need to take into account in order to position themselves within the current trends.

Pulse Holography: Review Of Applications

Science.gov (United States)

Smigielski, Paul

1990-04-01

Pulse Holography includes studies concerning time-varying phase objects as well as time-varying reflective objects involving the use of pulse ruby- and YAG-lasers. The paper is divided in two parts. One part concerns the direct use of 3-1) images reconstructed from holograms, i.e. applications to particle size analysis, 3-I) velocity measurements, 3-I) cinematography ... The second part describes applications using holographic interferometry in laboratory or in an industrial environment, i.e. applications to fluid mechanics, vibration analysis, non-destructive testing ... Recent developments including interferornetric cineholography, fiber optics, measurement of non-interferometric displacements ... , are also described. The future of holography depends to a great extent on data processing and interpretation of informations contained in holograms or holographic intericrograms. Therefore, we give the state of art in this field in Europe illustrated with some industrial applications.

Compiled MPI: Cost-Effective Exascale Applications Development

Energy Technology Data Exchange (ETDEWEB)

Bronevetsky, G; Quinlan, D; Lumsdaine, A; Hoefler, T

2012-04-10

The complexity of petascale and exascale machines makes it increasingly difficult to develop applications that can take advantage of them. Future systems are expected to feature billion-way parallelism, complex heterogeneous compute nodes and poor availability of memory (Peter Kogge, 2008). This new challenge for application development is motivating a significant amount of research and development on new programming models and runtime systems designed to simplify large-scale application development. Unfortunately, DoE has significant multi-decadal investment in a large family of mission-critical scientific applications. Scaling these applications to exascale machines will require a significant investment that will dwarf the costs of hardware procurement. A key reason for the difficulty in transitioning today's applications to exascale hardware is their reliance on explicit programming techniques, such as the Message Passing Interface (MPI) programming model to enable parallelism. MPI provides a portable and high performance message-passing system that enables scalable performance on a wide variety of platforms. However, it also forces developers to lock the details of parallelization together with application logic, making it very difficult to adapt the application to significant changes in the underlying system. Further, MPI's explicit interface makes it difficult to separate the application's synchronization and communication structure, reducing the amount of support that can be provided by compiler and run-time tools. This is in contrast to the recent research on more implicit parallel programming models such as Chapel, OpenMP and OpenCL, which promise to provide significantly more flexibility at the cost of reimplementing significant portions of the application. We are developing CoMPI, a novel compiler-driven approach to enable existing MPI applications to scale to exascale systems with minimal modifications that can be made incrementally over

Principles and applications of tribology

CERN Document Server

Moore, Desmond F

1975-01-01

Principles and Applications of Tribology provides a mechanical engineering perspective of the fundamental understanding and applications of tribology. This book is organized into two parts encompassing 16 chapters that cover the principles of friction and different types of lubrication. Chapter 1 deals with the immense scope of tribology and the range of applications in the existing technology, and Chapter 2 is devoted entirely to the evaluation and measurement of surface texture. Chapters 3 to 5 present the fundamental concepts underlying the friction of metals, elastomers, and other material

A Robust Design Applicability Model

DEFF Research Database (Denmark)

Ebro, Martin; Lars, Krogstie; Howard, Thomas J.

2015-01-01

to be applicable in organisations assigning a high importance to one or more factors that are known to be impacted by RD, while also experiencing a high level of occurrence of this factor. The RDAM supplements existing maturity models and metrics to provide a comprehensive set of data to support management......This paper introduces a model for assessing the applicability of Robust Design (RD) in a project or organisation. The intention of the Robust Design Applicability Model (RDAM) is to provide support for decisions by engineering management considering the relevant level of RD activities...

Stochastic Analysis with Financial Applications

CERN Document Server

Kohatsu-Higa, Arturo; Sheu, Shuenn-Jyi

2011-01-01

Stochastic analysis has a variety of applications to biological systems as well as physical and engineering problems, and its applications to finance and insurance have bloomed exponentially in recent times. The goal of this book is to present a broad overview of the range of applications of stochastic analysis and some of its recent theoretical developments. This includes numerical simulation, error analysis, parameter estimation, as well as control and robustness properties for stochastic equations. This book also covers the areas of backward stochastic differential equations via the (non-li

Tensor eigenvalues and their applications

CERN Document Server

Qi, Liqun; Chen, Yannan

2018-01-01

This book offers an introduction to applications prompted by tensor analysis, especially by the spectral tensor theory developed in recent years. It covers applications of tensor eigenvalues in multilinear systems, exponential data fitting, tensor complementarity problems, and tensor eigenvalue complementarity problems. It also addresses higher-order diffusion tensor imaging, third-order symmetric and traceless tensors in liquid crystals, piezoelectric tensors, strong ellipticity for elasticity tensors, and higher-order tensors in quantum physics. This book is a valuable reference resource for researchers and graduate students who are interested in applications of tensor eigenvalues.

Microwave materials for wireless applications

CERN Document Server

Cruickshank, David B

2011-01-01

This practical resource offers you an in-depth, up-to-date understanding of the use of microwave magnetic materials for cutting-edge wireless applications. The book discusses device applications used in wireless infrastructure base stations, point-to-point radio links, and a range of more specialized microwave systems. You find detailed discussions on the attributes of each family of magnetic materials with respect to specific wireless applications. Moreover, the book addresses two of the hottest topics in the field today - insertion loss and intermodulation. This comprehensive reference also

Amorphous chalcogenides advances and applications

CERN Document Server

Wang, Rong Ping

2014-01-01

This book provides a comprehensive overview of the chalcogenide glass science and various applications based on the glasses. It starts with a review on the glass-forming ability of various systems, followed by a discussion on the structural and physical properties of various chalcolgenide glasses and their application in integrated optics. The chapters have been contributed by prominent experts from all over the world, and therefore, the book presents the recent research advances in the area. This book will appeal to anyone who is involved in glass science and technology and glass application.

Solid-state devices and applications

CERN Document Server

Lewis, Rhys

1971-01-01

Solid-State Devices and Applications is an introduction to the solid-state theory and its devices and applications. The book also presents a summary of all major solid-state devices available, their theory, manufacture, and main applications. The text is divided into three sections. The first part deals with the semiconductor theory and discusses the fundamentals of semiconductors; the kinds of diodes and techniques in their manufacture; the types and modes of operation of bipolar transistors; and the basic principles of unipolar transistors and their difference with bipolar transistors. The s

User clustering in smartphone applications.

Science.gov (United States)

Schaefers, Klaus; Ribeiro, David

2012-01-01

In the context of mobile health applications usability is a crucial factor to achieve user acceptance. The successful user interface (UI) design requires a deep understanding of the needs and requirements of the targeted audience. This paper explores the application of the K-Means algorithm on smartphone usage data in order to offer Human Computer Interaction (HCI) specialists a better insight into their user group. Two different feature space representations are introduced and used to identify persona like stereotypes in a real world data set, which was obtained from a public available smartphone application.

Biomedical applications of magnetic particles

CERN Document Server

Mefford, Thompson

2018-01-01

Magnetic particles are increasingly being used in a wide variety of biomedical applications. Written by a team of internationally respected experts, this book provides an up-to-date authoritative reference for scientists and engineers. The first section presents the fundamentals of the field by explaining the theory of magnetism, describing techniques to synthesize magnetic particles, and detailing methods to characterize magnetic particles. The second section describes biomedical applications, including chemical sensors and cellular actuators, and diagnostic applications such as drug delivery, hyperthermia cancer treatment, and magnetic resonance imaging contrast.

Ultraviolet laser technology and applications

CERN Document Server

Elliott, David L

1995-01-01

Ultraviolet Laser Technology and Applications is a hands-on reference text that identifies the main areas of UV laser technology; describes how each is applied; offers clearly illustrated examples of UV opticalsystems applications; and includes technical data on optics, lasers, materials, and systems. This book is unique for its comprehensive, in-depth coverage. Each chapter deals with a different aspect of the subject, beginning with UV light itself; moving through the optics, sources, and systems; and concluding with detailed descriptions of applications in various fields.The text enables pr

Ultrabroadband spectroscopy for security applications

DEFF Research Database (Denmark)

Engelbrecht, Sunniva; Berge, Luc; Skupin, Stefan

2015-01-01

Ultrabroadband spectroscopy is a promising novel approach to overcome two major hurdles which have so far limited the application of THz spectroscopy for security applications: the increased bandwidth enables to record several characteristic spectroscopic features and the technique allows...

Android application development with Maven

CERN Document Server

Papapetrou, Patroklos

2015-01-01

Android Application Development with Maven is intended for Android developers or devops engineers who want to use Maven to effectively develop quality Android applications. It would be helpful, but not necessary, if you have some previous experience with Maven.

Technological and industrial applications of neutrons

International Nuclear Information System (INIS)

Weitkamp, C.

1976-07-01

Technological and industrial applications of neutrons are reviewed except applications in power generation, biology and medicine, and solid-state research. Techniques are grouped in three main categories: isotope production, material testing, and material analysis. Following a brief description of the different methods, an attempt is made to assess their applicability and to point out current developments. (orig.) [de

Technological and industrial applications of neutrons

International Nuclear Information System (INIS)

Weitkamp, C.

1977-01-01

Technological and industrial applications of neutrons are reviewed except applications in power generation, biology and medicine, and solid-state research. Techniques are grouped in three main catagories: material production, material testing, and material analysis. Following a brief description of the different methods, an attempt is made to assess their applicability and to point out current developments. (author)

Novel applications of non-volatile memories

Energy Technology Data Exchange (ETDEWEB)

Duthie, I

1982-01-01

The author reviews briefly the evolution of the programmable memory and the alternative technologies, before discussing the operation of a small EEPROM when used in conjunction with a microprocessor for typical applications. Some applications are reviewed and the opportunities which eeproms can offer for new applications are presented, together with the requirements for artificial intelligence to become a reality.

Application experiences with the Globus toolkit.

Energy Technology Data Exchange (ETDEWEB)

Brunett, S.

1998-06-09

The Globus grid toolkit is a collection of software components designed to support the development of applications for high-performance distributed computing environments, or ''computational grids'' [14]. The Globus toolkit is an implementation of a ''bag of services'' architecture, which provides application and tool developers not with a monolithic system but rather with a set of stand-alone services. Each Globus component provides a basic service, such as authentication, resource allocation, information, communication, fault detection, and remote data access. Different applications and tools can combine these services in different ways to construct ''grid-enabled'' systems. The Globus toolkit has been used to construct the Globus Ubiquitous Supercomputing Testbed, or GUSTO: a large-scale testbed spanning 20 sites and included over 4000 compute nodes for a total compute power of over 2 TFLOPS. Over the past six months, we and others have used this testbed to conduct a variety of application experiments, including multi-user collaborative environments (tele-immersion), computational steering, distributed supercomputing, and high throughput computing. The goal of this paper is to review what has been learned from these experiments regarding the effectiveness of the toolkit approach. To this end, we describe two of the application experiments in detail, noting what worked well and what worked less well. The two applications are a distributed supercomputing application, SF-Express, in which multiple supercomputers are harnessed to perform large distributed interactive simulations; and a tele-immersion application, CAVERNsoft, in which the focus is on connecting multiple people to a distributed simulated world.

An Introduction to iPhone Hardware, Operating System, Applications and Development of iPhone Applications

OpenAIRE

Abdul Qadir, Yasir

2010-01-01

The aim of this thesis work is to discuss the newly popular mobile phone device named iPhone made by Apple Inc, iPhone operating system and iPhone Applications. Apple iPhone has recently become extremely popular and just within two years of its launch it has captured millions of customers around the world. Thousands of developers have been developing all kinds of mobile phone applications for iPhone and a new era of mobile phone applications development has started. Augmented reality applicat...

HTML5 web application development by example

CERN Document Server

Gustafson, JM

2013-01-01

The best way to learn anything is by doing. The author uses a friendly tone and fun examples to ensure that you learn the basics of application development. Once you have read this book, you should have the necessary skills to build your own applications.If you have no experience but want to learn how to create applications in HTML5, this book is the only help you'll need. Using practical examples, HTML5 Web Application Development by Example will develop your knowledge and confidence in application development.

The recent industrial EB applications in Japan

International Nuclear Information System (INIS)

Nakai, Koji; Kashiwagi, Masayuki; Mizusawa, Kenichi

1995-01-01

The conventional applications of electron beam processing such as, crosslinking of electric wire and cable insulations, polyethylene foam, and of rubber tire components have been the main part of the EB business for many years. New applications are continuing to appear, however, the growth of the new applications has been relatively slow. Nissin High-Voltage, as one of the worlds leading manufacturers of electron beam equipments, continues to develop and improve EB equipment to meet the requirements of these new applications. In this paper recent EB applications and its improvements are described. (author)

Developing Web Applications

CERN Document Server

Moseley, Ralph

2007-01-01

Building applications for the Internet is a complex and fast-moving field which utilizes a variety of continually evolving technologies. Whether your perspective is from the client or server side, there are many languages to master - X(HTML), JavaScript, PHP, XML and CSS to name but a few. These languages have to work together cleanly, logically and in harmony with the systems they run on, and be compatible with any browsers with which they interact. Developing Web Applications presents script writing and good programming practice but also allows students to see how the individual technologi

AUTOMATED INADVERTENT INTRUDER APPLICATION

International Nuclear Information System (INIS)

Koffman, L; Patricia Lee, P; Jim Cook, J; Elmer Wilhite, E

2007-01-01

The Environmental Analysis and Performance Modeling group of Savannah River National Laboratory (SRNL) conducts performance assessments of the Savannah River Site (SRS) low-level waste facilities to meet the requirements of DOE Order 435.1. These performance assessments, which result in limits on the amounts of radiological substances that can be placed in the waste disposal facilities, consider numerous potential exposure pathways that could occur in the future. One set of exposure scenarios, known as inadvertent intruder analysis, considers the impact on hypothetical individuals who are assumed to inadvertently intrude onto the waste disposal site. Inadvertent intruder analysis considers three distinct scenarios for exposure referred to as the agriculture scenario, the resident scenario, and the post-drilling scenario. Each of these scenarios has specific exposure pathways that contribute to the overall dose for the scenario. For the inadvertent intruder analysis, the calculation of dose for the exposure pathways is a relatively straightforward algebraic calculation that utilizes dose conversion factors. Prior to 2004, these calculations were performed using an Excel spreadsheet. However, design checks of the spreadsheet calculations revealed that errors could be introduced inadvertently when copying spreadsheet formulas cell by cell and finding these errors was tedious and time consuming. This weakness led to the specification of functional requirements to create a software application that would automate the calculations for inadvertent intruder analysis using a controlled source of input parameters. This software application, named the Automated Inadvertent Intruder Application, has undergone rigorous testing of the internal calculations and meets software QA requirements. The Automated Inadvertent Intruder Application was intended to replace the previous spreadsheet analyses with an automated application that was verified to produce the same calculations and

Current new applications of laser plasmas

International Nuclear Information System (INIS)

Hauer, A.A.; Forslund, D.W.; McKinstrie, C.J.; Wark, J.S.; Hargis, P.J. Jr.; Hamil, R.A.; Kindel, J.M.

1988-09-01

This report describes several new applications of laser-produced plasmas that have arisen in the last few years. Most of the applications have been an outgrowth of the active research in laser/matter interaction inspired by the pursuit of laser fusion. Unusual characteristics of high-intensity laser/matter interaction, such as intense x-ray and particle emission, were noticed early in the field and are now being employed in a significant variety of applications outside the fusion filed. Applications range from biology to materials science to pulsed-power control and particle accelerators. 92 refs., 23 figs., 4 tabs

Sleep Applications to Assess Sleep Quality.

Science.gov (United States)

Fietze, Ingo

2016-12-01

This article highlights the potential uses that smartphone applications may have for helping those with sleep problems. Applications in smartphones offer the promised possibility of detection of sleep. From the author's own experience, one can also conclude that sleep applications are approximately as good as polysomnography in detection of sleep time, similar to the conventional wearable actimeters. In the future, sleep applications will help to further enhance awareness of sleep health and to distinguish those who actually poorly and only briefly sleep from those who suffer more likely from paradox insomnia. Copyright © 2016 Elsevier Inc. All rights reserved.

Programming Language Software For Graphics Applications

Science.gov (United States)

Beckman, Brian C.

1993-01-01

New approach reduces repetitive development of features common to different applications. High-level programming language and interactive environment with access to graphical hardware and software created by adding graphical commands and other constructs to standardized, general-purpose programming language, "Scheme". Designed for use in developing other software incorporating interactive computer-graphics capabilities into application programs. Provides alternative to programming entire applications in C or FORTRAN, specifically ameliorating design and implementation of complex control and data structures typifying applications with interactive graphics. Enables experimental programming and rapid development of prototype software, and yields high-level programs serving as executable versions of software-design documentation.

24 CFR 232.505 - Application and application fee.

Science.gov (United States)

2010-04-01

... approval. An application for insurance of a fire safety loan under this part shall be considered only in... HOUSING AND URBAN DEVELOPMENT MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES MORTGAGE INSURANCE FOR NURSING HOMES, INTERMEDIATE CARE FACILITIES, BOARD AND CARE HOMES, AND...

Effects of peak shaving technologies in the residential and commercial sector; Minsei bumon no fuka heijunka gijutsu no donyu koka

Energy Technology Data Exchange (ETDEWEB)

Nagata, Y. [Kyoto University, Kyoto (Japan); Takahashi, M.; Uchiyama, Y. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1997-09-01

This paper analyzes how much of the power demand could be reduced in the future by improving efficiencies of electric power utilizing appliances used in the residential and commercial sector. It discusses whether the reduction would lead to load leveling. Annual load rate in the power demand is continuing to decrease because of power demand increase in the residential and commercial sector, and increase in demand for air conditioning in summer. If a technology to improve electric appliance efficiency is proliferated to its maximum scope, the annual load rate in fiscal 2014 may be improved by 1.1 percent point. Since the improvement allows new power generation facility installation cost to be deferred, the power generation unit cost can be reduced by 0.11 yen per kwh. If a heat storage type air conditioning technology is proliferated to its maximum scope, the annual load rate in fiscal 2014 can be improved by 1.8 percent point, and the power generation cost may also be reduced. If the device efficiency improving technology and the heat storage type air conditioning technology are introduced to their maximum simultaneously, the annual load rate in fiscal 2014 can be improved by 2.5 percent point, and the power generation cost may also be reduced by 0.24 yen per kwh. If a promotion policy is taken on proliferation of a specific device efficiency improving technology having excellent economic performance by providing subsidy, the reduction amount of cumulative power generation expense will be much greater than the required subsidy amount. 10 refs., 9 figs., 22 tabs.

Effect and limitation of tuning accelerator pedal sensitivity by DBW; DBW ni yoru akuseru kando settei no koka to genkai

Energy Technology Data Exchange (ETDEWEB)

Takada, Y; Morita, S [Osaka City University, Osaka (Japan)

1997-10-01

DBW (Drive By Wire) system makes the constraint of direct connection between an accelerator pedal and the throttle valve free, so that optionally turning of throttle valve sensitivity becomes possible in automobiles driving. Reported here is the discussion of the effect and the limitation of this optionally tuning. As the former result, it became clear that the tuning method using torque signal and speed signal of the drive shaft, was easier than the method using only speed signal by PD control action. And as the latter result, upper limit was bound by the low gear ratio and tire spin. 2 refs., 11 figs.

Extensions and applications of degradation modeling

International Nuclear Information System (INIS)

Hsu, F.; Subudhi, M.; Samanta, P.K.; Vesely, W.E.

1991-01-01

Component degradation modeling being developed to understand the aging process can have many applications with potential advantages. Previous work has focused on developing the basic concepts and mathematical development of a simple degradation model. Using this simple model, times of degradations and failures occurrences were analyzed for standby components to detect indications of aging and to infer the effectiveness of maintenance in preventing age-related degradations from transforming to failures. Degradation modeling approaches can have broader applications in aging studies and in this paper, the authors discuss some of the extensions and applications of degradation modeling. The extensions and applications of the degradation modeling approaches discussed are: (a) theoretical developments to study reliability effects of different maintenance strategies and policies, (b) relating aging-failure rate to degradation rate, and (c) application to a continuously operating component

Automated Testing of Event-Driven Applications

DEFF Research Database (Denmark)

Jensen, Casper Svenning

may be tested by selecting an interesting input (i.e. a sequence of events), and deciding if a failure occurs when the selected input is applied to the event-driven application under test. Automated testing promises to reduce the workload for developers by automatically selecting interesting inputs...... and detect failures. However, it is non-trivial to conduct automated testing of event-driven applications because of, for example, infinite input spaces and the absence of specifications of correct application behavior. In this PhD dissertation, we identify a number of specific challenges when conducting...... automated testing of event-driven applications, and we present novel techniques for solving these challenges. First, we present an algorithm for stateless model-checking of event-driven applications with partial-order reduction, and we show how this algorithm may be used to systematically test web...

Automated transit planning, operation, and applications

CERN Document Server

Liu, Rongfang

2016-01-01

This book analyzes the successful implementations of automated transit in various international locations, such as Paris, Toronto, London, and Kuala Lumpur, and investigates the apparent lack of automated transit applications in the urban environment in the United States. The book begins with a brief definition of automated transit and its historical development. After a thorough description of the technical specifications, the author highlights a few applications from each sub-group of the automated transit spectrum. International case studies display various technologies and their applications, and identify vital factors that affect each system and performance evaluations of existing applications. The book then discusses the planning and operation of automated transit applications at both macro and micro levels. Finally, the book covers a number of less successful concepts, as well as the lessons learned, allow ng readers to gain a comprehensive understanding of the topic.

How should unmatched otolaryngology applicants proceed?

Science.gov (United States)

Schwan, Josianna; Abaza, Mona; Cabrera-Muffly, Cristina

2015-10-01

To determine the attitudes of otolaryngology residency program directors and chairpersons toward unmatched residency applicants, including whether a surgical internship or research year is preferred in considering repeat applicants. Cross-sectional survey. Approval was obtained from the Colorado Multiple Institution Review Board. A 12-question Web-based survey was sent to otolaryngology residency program directors and chairpersons three times over a 6-week period. Responses collected from respondents were anonymous, with no identifying characteristics. Forty-five percent of those contacted responded to the survey. The most commonly recommended course of action for an unmatched applicant was completion of a general surgery intern year (43%) or a year of research (31%). Program directors were more likely than chairpersons to recommend a year of research (P value 0.014). Ninety-seven percent of the respondents felt it was important or essential to obtain new letters of recommendation. Respondents ranked poor interview skills as the most common reason for applicants remaining unmatched (29%). Otolaryngology residency match is even more competitive for previously unmatched applicants. Unmatched applicants should be advised to proceed with either a research year or postgraduate year 1 general surgery year. Before applying again, applicants should obtain new letters of recommendation, and the importance of improving poor interviewing skills should be emphasized by advisors. N/A. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

77 FR 71818 - Endangered Species Recovery Permit Applications

Science.gov (United States)

2012-12-04

... following permit requests. Applicant Permit No. TE-78622A Applicant: William J. Mautz, Hilo, Hawaii The...-179036 Applicant: Cullen A. Wilkerson, Richmond, California The applicant requests a permit renewal to...

Special Heusler compounds for spintronic applications

Energy Technology Data Exchange (ETDEWEB)

Balke, B.

2007-07-01

This work emphasizes the potential of Heusler compounds in a wide range of spintronic applications. Using electronic structure calculations it is possible to design compounds for specific applications. Examples for GMR and TMR applications, for spin injection into semiconductors, and for spin torque transfer applications will be shown. After a detailed introduction about spintronics and related materials chapter 5 reports about the investigation of new half-metallic compounds where the Fermi energy is tuned in the middle of the gap to result in more stable compounds for GMR and TMR applications. The bulk properties of the quaternary Heusler alloy Co{sub 2}Mn{sub 1-x}Fe{sub x}Si with the Fe concentration ranging from x=0 to 1 are reported and the results suggest that the best candidate for applications may be found at an iron concentration of about 50%. Due to the effect that in the Co{sub 2}Mn{sub 1-x}Fe{sub x}Si series the transition metal carrying the localized moment is exchanged and this might lead to unexpected effects on the magnetic properties if the samples are not completely homogeneous chapter 6 reports about the optimization of the Heusler compounds for GMR and TMR applications. The structural and magnetic properties of the quaternary Heusler alloy Co{sub 2}FeAl{sub 1-x}Si{sub x} with varying Si concentration are reported. From the combination of experimental (better order for high Si content) and theoretical findings (robust gap at x=0.5) it is concluded that a compound with an intermediate Si concentration close to x=0.5-0.7 would be best suited for spintronic applications, especially for GMR and TMR applications. In chapter 7 the detailed investigation of compounds for spin injection into semiconductors is reported. It is shown that the diluted magnetic semiconductors based on CoTiSb with a very low lattice mismatch among each other are interesting materials for spintronics applications like Spin-LEDs or other spin injection devices. Chapter 8 refers

Smartphone applications: A contemporary resource for dermatopathology.

Science.gov (United States)

Hanna, Matthew G; Parwani, Anil V; Pantanowitz, Liron; Punjabi, Vinod; Singh, Rajendra

2015-01-01

Smartphone applications in medicine are becoming increasingly prevalent. Given that most pathologists and pathology trainees today use smartphones, an obvious modality for pathology education is through smartphone applications. "MyDermPath" is a novel smartphone application that was developed as an interactive reference tool for dermatology and dermatopathology, available for iOS and Android. "MyDermPath" was developed using Apple Xcode and Google Android SDK. Dermatology images (static and virtual slides) were annotated and configured into an algorithmic format. Each image comprised educational data (diagnosis, clinical information, histopathology, special stains, differential diagnosis, clinical management, linked PubMed references). Added functionality included personal note taking, pop quiz, and image upload capabilities. A website was created (http://mydermpath.com) to mirror the app. The application was released in August 2011 and updated in November 2013. More than 1,100 reference diagnoses, with over 2,000 images are available via the application and website. The application has been downloaded approximately 14,000 times. The application is available for use on iOS and Android platforms. Smartphone applications have tremendous potential for advancing pathology education. "MyDermPath" represents an interactive reference tool for dermatology and dermatopathologists.

34 CFR 645.20 - How many applications for an Upward Bound award may an eligible applicant submit?

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false How many applications for an Upward Bound award may an eligible applicant submit? 645.20 Section 645.20 Education Regulations of the Offices of the Department of... Does One Apply for An Award? § 645.20 How many applications for an Upward Bound award may an eligible...

ANDROID CHATTING APPLICATION BASED ON WI-FI TECHNOLOGY

OpenAIRE

Ekata M. Lambture *, Prof. Z.M. Shaikh

2016-01-01

As we know that Android operating system is one of the popular operating system for mobile applications.It supports mobile applications such as Chatting based applications,File sharing applications etc. In market thosands of applications are available in which users can send-receive messages,shares the files,send images,audio,video through network connectivity such as 2G,3G,4G. Android chatting application based on wi-fi technology provides same features but using WI-FI(Wireless Fidelity)...

Self-Awareness of Cloud Applications

NARCIS (Netherlands)

Iosup, Alexandru; Zhu, Xiaoyun; Merchant, Arif; Kalyvianaki, Eva; Maggio, Martina; Spinner, Simon; Abdelzaher, Tarek; Mengshoel, Ole; Bouchenak, Sara

2016-01-01

Cloud applications today deliver an increasingly larger portion of the Information and Communication Technology (ICT) services. To address the scale, growth, and reliability of cloud applications, self-aware management and scheduling are becoming commonplace. How are they used in practice? In this

Superconducting bearings for flywheel applications

DEFF Research Database (Denmark)

Abrahamsen, A.B.

2001-01-01

A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings...

16 CFR 1034.102 - Application.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Application. 1034.102 Section 1034.102 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS... Application. This part applies to all programs or activities conducted by the agency. ...

28 CFR 54.200 - Application.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Application. 54.200 Section 54.200 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) NONDISCRIMINATION ON THE BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Coverage § 54.200 Application...

49 CFR 1014.102 - Application.

Science.gov (United States)

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Application. 1014.102 Section 1014.102 Transportation Other Regulations Relating to Transportation (Continued) SURFACE TRANSPORTATION BOARD, DEPARTMENT... HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY THE SURFACE TRANSPORTATION BOARD § 1014.102 Application...

Methodology and applications of eyetracking

Directory of Open Access Journals (Sweden)

Arkadiusz Rajs

2016-05-01

Garbary 2,85-229 Bydgoszcz, jacek.gospodarczyk@byd.pl   Summary Eyetracking gives great capability of computer’s systems control and study of usability applications. In this paper we show construction of eyetracker and range of applications.   Key words: eyetracker, computer vision.

28 CFR 23.3 - Applicability.

Science.gov (United States)

2010-07-01

... Administration DEPARTMENT OF JUSTICE CRIMINAL INTELLIGENCE SYSTEMS OPERATING POLICIES § 23.3 Applicability. (a) These policy standards are applicable to all criminal intelligence systems operating through support...-647). (b) As used in these policies: (1) Criminal Intelligence System or Intelligence System means the...

Bio-Conjugates for Nanoscale Applications

DEFF Research Database (Denmark)

Villadsen, Klaus

Bio-conjugates for Nanoscale Applications is the title of this thesis, which covers three different projects in chemical bio-conjugation research, namely synthesis and applications of: Lipidated fluorescent peptides, carbohydrate oxime-azide linkers and N-aryl O-R2 oxyamine derivatives. Lipidated...

25 CFR 2.3 - Applicability.

Science.gov (United States)

2010-04-01

... administrative appeal procedure applicable to a specific type of decision. ... AFFAIRS, DEPARTMENT OF THE INTERIOR PROCEDURES AND PRACTICE APPEALS FROM ADMINISTRATIVE ACTIONS § 2.3 Applicability. (a) Except as provided in paragraph (b) of this section, this part applies to all appeals from...

32 CFR 318.2 - Applicability.

Science.gov (United States)

2010-07-01

... locations. (b) This part shall be made applicable to DoD contractors who are operating a system of records... DEFENSE THREAT REDUCTION AGENCY PRIVACY PROGRAM § 318.2 Applicability. (a) This part applies to all..., associated with maintaining a system of records. ...

75 FR 21584 - Notice of Solicitation of Applications (NOSA) for Inviting Applications for Renewable Energy...

Science.gov (United States)

2010-04-26

... United States (U.S.), then applicants must provide authoritative evidence of the foreign operating... development as well as the demonstration process, applicants must provide authoritative evidence of the... expertise in hydropower development, engineering, installation, and maintenance. Authoritative evidence that...

Goal Planning and Pursuit: Mobile Application Development and Evaluation

Science.gov (United States)

2016-08-01

Applications , Self-Directed Learning, Army Learning Model 16. SECURITY ... application . The application was developed in both iOS (iPhone) and Android versions. This application , entitled Army Achieve, consisted of five key steps... applications were developed to function equivalently in both iPhone and Android versions. Application Development Process The application

Do otolaryngology residency applicants relocate for training?

Science.gov (United States)

Gebhard, Grant M; Hauser, Leah J; Dally, Miranda J; Weitzenkamp, David A; Cabrera-Muffly, Cristina

2016-04-01

To determine whether there is an association between the geographic location of an applicant's undergraduate school, medical school, and residency program among matched otolaryngology residency applicants. Observational. Otolaryngology residency program applications to our institution from 2009 to 2013 were analyzed. The geographic location of each applicant's undergraduate education and medical education were collected. Online public records were queried to determine the residency program location of matched applicants. Applicants who did not match or who attended medical school outside the United States were excluded. Metro area, state, and region were determined according to US Census Bureau definitions. From 2009 to 2013, 1,089 (78%) of 1,405 applicants who matched into otolaryngology residency applied to our institution. The number of subjects who attended medical school and residency in the same geographic region was 241 (22%) for metropolitan area, 305 (28%) for state, and 436 (40%) for region. There was no difference in geographic location retention by gender or couples match status of the subject. United States Medical Licensing Exam step 1 scores correlated with an increased likelihood of subjects staying within the same geographic region (P = .03). Most otolaryngology applicants leave their previous geographic area to attend residency. Based on these data, the authors recommend against giving weight to geography as a factor when inviting applicants to interview. NA. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

Applications of neutron irradiation

International Nuclear Information System (INIS)

Ito, Yasuo

1999-01-01

The present state of art of applications of neutron irradiation is overviewed taking neutron activation analysis, prompt gamma-ray analysis, fission/alpha track methods, boron neutron capture therapy as examples. What is common among them is that the technologies are nearly matured for wide use by non- nuclear scientists. But the environment around research reactors is not prospective. These applications should be encouraged by incorporating in the neutron science society. (author)

Mobile Augmented Reality Applications

OpenAIRE

Prochazka, David; Stencl, Michael; Popelka, Ondrej; Stastny, Jiri

2011-01-01

Augmented reality have undergone considerable improvement in past years. Many special techniques and hardware devices were developed, but the crucial breakthrough came with the spread of intelligent mobile phones. This enabled mass spread of augmented reality applications. However mobile devices have limited hardware capabilities, which narrows down the methods usable for scene analysis. In this article we propose an augmented reality application which is using cloud computing to enable using...

Applications of Genetic Programming

DEFF Research Database (Denmark)

Gaunholt, Hans; Toma, Laura

1996-01-01

In this report a study of genetic programming (GP) has been performed with respect to a number of applications such as Symbolic function regression, Solving Symbolic Differential Equations, Image encoding, the ant problem etc.......In this report a study of genetic programming (GP) has been performed with respect to a number of applications such as Symbolic function regression, Solving Symbolic Differential Equations, Image encoding, the ant problem etc....

Particles beams and applications

International Nuclear Information System (INIS)

Uzureau, J.L.

1996-01-01

This issue of the ''Chocs'' journal is devoted to particles beams used by the D.A.M. (Direction of Military Applications) and to their applications. The concerned beams are limited to those in an energy range from hundred of Kev to several Gev. Light ions (protons, deuterons, alpha) where it is easy to produce neutrons sources and heavy ions (from carbon to gold). (N.C.). 8 refs., 2 figs

Sustainable Energy Systems and Applications

CERN Document Server

Dinçer, İbrahim

2012-01-01

Sustainable Energy Systems and Applications presents analyses of sustainable energy systems and their applications, providing new understandings, methodologies, models and applications along with descriptions of several illustrative examples and case studies. This textbook aims to address key pillars in the field, such as: better efficiency, cost effectiveness, use of energy resources, environment, energy security, and sustainable development. It also includes some cutting-edge topics, such as hydrogen and fuel cells, renewable, clean combustion technologies, CO2 abatement technologies, and some potential tools for design, analysis and performance improvement. The book also: Discusses producing energy by increasing systems efficiency in generation, conversion, transportation and consumption Analyzes the conversion of fossil fuels to clean fuels for limiting  pollution and creating a better environment Sustainable Energy Systems and Applications is a research-based textbook which can be used by senior u...

Industrial applications of electron accelerators

CERN Document Server

Cleland, M R

2006-01-01

This paper addresses the industrial applications of electron accelerators for modifying the physical, chemical or biological properties of materials and commercial products by treatment with ionizing radiation. Many beneficial effects can be obtained with these methods, which are known as radiation processing. The earliest practical applications occurred during the 1950s, and the business of radiation processing has been expanding since that time. The most prevalent applications are the modification of many different plastic and rubber products and the sterilization of single-use medical devices. Emerging applications are the pasteurization and preservation of foods and the treatment of toxic industrial wastes. Industrial accelerators can now provide electron energies greater than 10 MeV and average beam powers as high as 700 kW. The availability of high-energy, high-power electron beams is stimulating interest in the use of X-rays (bremsstrahlung) as an alternative to gamma rays from radioactive nuclides.

Application Security in the ISO27001 Environment

CERN Document Server

Vinod, Vasudevan; Firosh, Ummer

2008-01-01

Application Security in the ISO27001 Environment demonstrates how to secure software applications within a best practice ISO/IEC 27001 environment and supports implementation of the PCI DSS Payment Application Security Standard.

B2B oriented on-line applications generator

OpenAIRE

Vintilă Bogdan-Cătălin

2008-01-01

B2B applications are presented. Quality characteristics of B2B applications are defined. B2B application structure is defined. The application for contracts is developed. The advantages are identified.

Empolder and application of LiveWire program

International Nuclear Information System (INIS)

Zhang Bo; Li Jing; Wang Xiaoming

2007-01-01

LiveWire is a specific module of Netscape Web server to actualize CGI function; through LiveWire application program one can create dynamic web page on web site. This article introduces how to write LiveWire application code, have to compile, debug and manage LiveWire application programs, and how to apply LiveWire application program on Netscape Web server to create a dynamic web page. (authors)

Smartphones, tablets and mobile applications for radiology.

Science.gov (United States)

Székely, András; Talanow, Roland; Bágyi, Péter

2013-05-01

Smartphones are phone devices that may also be used for browsing, navigation and running smaller computer programs called applications. One may consider them as compact personal computers which are primarily to be used for making phone calls. Tablets or "tablet PCs" are fully functioning standalone computers the size of a thin LCD monitor that use the screen itself for control and data input. Both of these devices may be categorized based on the mobile operating system that they use. The aim of this study is to illustrate how smartphones and tablets can be used by diagnostic imaging professionals, radiographers and residents, and to introduce relevant applications that are available for their field. A search was performed on iTunes, Android Market, Blackberry App World, and Windows Phone Marketplace for mobile applications pertinent to the field of diagnostic imaging. The following terms were applied for the search strategy: (1) radiology, (2) X-ray, (3) ultrasound, (4) MRI, (5) CT, (6) radiographer, (7) nuclear medicine. Two radiologists and one radiology resident reviewed the results. Our review was limited to english-language software. Additional applications were identified by reviewing the list of similar software provided in the description of each application. We downloaded and installed all applications that appeared relevant to an appropriate mobile phone or tablet device. We identified and reviewed a total of 102 applications. We ruled out 1 non-English application and 20 other applications that were created for entertainment purposes. Thus our final list includes 81 applications in the following five categories: diagnostic reading, decision support applications, medical books, interactive encyclopedias, and journal reading programs. Smartphones and tablets offer new opportunities for diagnostic imaging practitioners; these easy-to-use devices equipped with excellent display may be used for diagnostic reading, reference, learning, consultation, and for

Smartphones, tablets and mobile applications for radiology

Energy Technology Data Exchange (ETDEWEB)

Székely, András, E-mail: andras.szekely@gmail.com [Kenézy Hospital Department of Radiology, 4043 Debrecen, Bartók Béla út 2-26 (Hungary); Talanow, Roland, E-mail: roland@talanow.info [P.O. Box 1570, Lincoln, CA 95648 (United States); Bágyi, Péter [Kenézy Hospital Department of Radiology, 4043 Debrecen, Bartók Béla út 2-26 (Hungary)

2013-05-15

Background: Smartphones are phone devices that may also be used for browsing, navigation and running smaller computer programs called applications. One may consider them as compact personal computers which are primarily to be used for making phone calls. Tablets or “tablet PCs” are fully functioning standalone computers the size of a thin LCD monitor that use the screen itself for control and data input. Both of these devices may be categorized based on the mobile operating system that they use. The aim of this study is to illustrate how smartphones and tablets can be used by diagnostic imaging professionals, radiographers and residents, and to introduce relevant applications that are available for their field. Materials and methods: A search was performed on iTunes, Android Market, Blackberry App World, and Windows Phone Marketplace for mobile applications pertinent to the field of diagnostic imaging. The following terms were applied for the search strategy: (1) radiology, (2) X-ray, (3) ultrasound, (4) MRI, (5) CT, (6) radiographer, (7) nuclear medicine. Two radiologists and one radiology resident reviewed the results. Our review was limited to english-language software. Additional applications were identified by reviewing the list of similar software provided in the description of each application. We downloaded and installed all applications that appeared relevant to an appropriate mobile phone or tablet device. Results: We identified and reviewed a total of 102 applications. We ruled out 1 non-English application and 20 other applications that were created for entertainment purposes. Thus our final list includes 81 applications in the following five categories: diagnostic reading, decision support applications, medical books, interactive encyclopedias, and journal reading programs. Conclusion: Smartphones and tablets offer new opportunities for diagnostic imaging practitioners; these easy-to-use devices equipped with excellent display may be used for

Smartphones, tablets and mobile applications for radiology

International Nuclear Information System (INIS)

Székely, András; Talanow, Roland; Bágyi, Péter

2013-01-01

Background: Smartphones are phone devices that may also be used for browsing, navigation and running smaller computer programs called applications. One may consider them as compact personal computers which are primarily to be used for making phone calls. Tablets or “tablet PCs” are fully functioning standalone computers the size of a thin LCD monitor that use the screen itself for control and data input. Both of these devices may be categorized based on the mobile operating system that they use. The aim of this study is to illustrate how smartphones and tablets can be used by diagnostic imaging professionals, radiographers and residents, and to introduce relevant applications that are available for their field. Materials and methods: A search was performed on iTunes, Android Market, Blackberry App World, and Windows Phone Marketplace for mobile applications pertinent to the field of diagnostic imaging. The following terms were applied for the search strategy: (1) radiology, (2) X-ray, (3) ultrasound, (4) MRI, (5) CT, (6) radiographer, (7) nuclear medicine. Two radiologists and one radiology resident reviewed the results. Our review was limited to english-language software. Additional applications were identified by reviewing the list of similar software provided in the description of each application. We downloaded and installed all applications that appeared relevant to an appropriate mobile phone or tablet device. Results: We identified and reviewed a total of 102 applications. We ruled out 1 non-English application and 20 other applications that were created for entertainment purposes. Thus our final list includes 81 applications in the following five categories: diagnostic reading, decision support applications, medical books, interactive encyclopedias, and journal reading programs. Conclusion: Smartphones and tablets offer new opportunities for diagnostic imaging practitioners; these easy-to-use devices equipped with excellent display may be used for

Performance profiling for brachytherapy applications

Science.gov (United States)

Choi, Wonqook; Cho, Kihyeon; Yeo, Insung

2018-05-01

In many physics applications, a significant amount of software (e.g. R, ROOT and Geant4) is developed on novel computing architectures, and much effort is expended to ensure the software is efficient in terms of central processing unit (CPU) time and memory usage. Profiling tools are used during the evaluation process to evaluate the efficiency; however, few such tools are able to accommodate low-energy physics regions. To address this limitation, we developed a low-energy physics profiling system in Geant4 to profile the CPU time and memory of software applications in brachytherapy applications. This paper describes and evaluates specific models that are applied to brachytherapy applications in Geant4, such as QGSP_BIC_LIV, QGSP_BIC_EMZ, and QGSP_BIC_EMY. The physics range in this tool allows it to be used to generate low energy profiles in brachytherapy applications. This was a limitation in previous studies, which caused us to develop a new profiling tool that supports profiling in the MeV range, in contrast to the TeV range that is supported by existing high-energy profiling tools. In order to easily compare the profiling results between low-energy and high-energy modes, we employed the same software architecture as that in the SimpliCarlo tool developed at the Fermilab National Accelerator Laboratory (FNAL) for the Large Hadron Collider (LHC). The results show that the newly developed profiling system for low-energy physics (less than MeV) complements the current profiling system used for high-energy physics (greater than TeV) applications.

Just-in-time Database-Driven Web Applications

Science.gov (United States)

2003-01-01

"Just-in-time" database-driven Web applications are inexpensive, quickly-developed software that can be put to many uses within a health care organization. Database-driven Web applications garnered 73873 hits on our system-wide intranet in 2002. They enabled collaboration and communication via user-friendly Web browser-based interfaces for both mission-critical and patient-care-critical functions. Nineteen database-driven Web applications were developed. The application categories that comprised 80% of the hits were results reporting (27%), graduate medical education (26%), research (20%), and bed availability (8%). The mean number of hits per application was 3888 (SD = 5598; range, 14-19879). A model is described for just-in-time database-driven Web application development and an example given with a popular HTML editor and database program. PMID:14517109

Quantum state discrimination and its applications

International Nuclear Information System (INIS)

Bae, Joonwoo; Kwek, Leong-Chuan

2015-01-01

Quantum state discrimination underlies various applications in quantum information processing tasks. It essentially describes the distinguishability of quantum systems in different states, and the general process of extracting classical information from quantum systems. It is also useful in quantum information applications, such as the characterization of mutual information in cryptographic protocols, or as a technique for deriving fundamental theorems on quantum foundations. It has deep connections to physical principles such as relativistic causality. Quantum state discrimination traces a long history of several decades, starting with the early attempts to formalize information processing of physical systems such as optical communication with photons. Nevertheless, in most cases, the problems of finding optimal strategies of quantum state discrimination remain unsolved, and related applications are valid in some limited cases only. The present review aims to provide an overview on quantum state discrimination, covering some recent progress, and addressing applications in some selected areas. This review serves to strengthen the link between results in quantum state discrimination and quantum information applications, by showing the ways in which the fundamental results are exploited in applications and vice versa. (topical review)

HTGR Application Economic Model Users' Manual

International Nuclear Information System (INIS)

Gandrik, A.M.

2012-01-01

The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

Magnetic materials fundamentals, products, properties, applications

CERN Document Server

Hilzinger, Rainer

2013-01-01

At a practical level, this compendium reviews the basics of soft and hard magnetic materials, discusses the advantages of the different processing routes for the exploitation of the magnetic properties and hence assists in proper, fail-safe and economic application of magnetic materials. Essential guidelines and formulas for the calculation of the magnetic and electrical properties, temperature and long-term stability of permanent magnets, of inductive components and magnetic shielding are compiled. Selected fields of application and case studies illustrate the large diversity of technical applications. Application engineers will appreciate the comprehensive compilation of the properties and detailed characteristic curves of modern soft and hard magnetic materials. Materials scientists will enjoy the presentation of the different processing routes and their impact on the magnetic properties and students will profit from the survey from the basics of magnetism down to the applications in inductive components, ...