WorldWideScience

Sample records for apparatus present state

  1. JT-60 negative ion beam NBI apparatus. Present state of its construction and initial experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Kuriyama, Masaaki [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    1997-02-01

    The NBI (Neutral Beam Injection) apparatus used for negative ion at first in the world, has an aim to actually prove heating and electric current drive with high density plasma at the JT-60 and to constitute physical and technical bases for selection and design of heating apparatus of ITER (International Thermal Nuclear Fusion Experimental Reactor). Construction of 500 KeV negative ion NBI apparatus for the JT-60 started to operate on 1993 was completed at March, 1996. On the way, at a preliminary test on forming and acceleration of the negative ion beam using a portion of this apparatus, 400 KeV and 13.5 A/D of the highest deuterium negative ion beam acceleration in the world was obtained successfully, which gave a bright forecasting of the plasma heating and electric current drive experiment using the negative ion NBI apparatus. After March, 1996, some plans to begin beam incident experiment at the JT-60 using the negative ion NBI apparatus and to execute the heating and electric current drive experiment at the JT-60 under intending increase of beam output are progressed. (G.K.)

  2. Preferred states of the apparatus

    Indian Academy of Sciences (India)

    Anu Venugopalan

    2012-02-01

    A simple one-dimensional model for the system–apparatus interaction is analysed. The system is a spin-1/2 particle, and its position and momentum degrees constitute the apparatus. An analysis involving only unitary Schrödinger dynamics illustrates the nature of the correlations established in the system–apparatus entangled state. It is shown that even in the absence of any environment-induced decoherence, or any other measurement model, certain initial states of the apparatus – like localized Gaussian wavepackets – are preferred over others, in terms of measurementlike one-to-one correlations in the pure system–apparatus entangled state.

  3. Participation and Neutrality of State Civil Apparatus in Direct Regional Election: Surabaya City Case

    Directory of Open Access Journals (Sweden)

    Catur Wibowo Budi Santoso

    2016-05-01

    Full Text Available In relation to the existence of State Civil Apparatus, at least there are two issues that must be observed in the implementation of Regional elections, namely the issues of participation and neutrality of State Civil Apparatus. The phenomenon that occurs during this time is the involvement of the State Civil Apparatus in attendance is still minimum (low. Moreover, it is believed that there are many Civil Apparatus State who is not neutral in the organization of Regional Elections. In this regard, this study aims to analyze the participation and neutrality of State Civil Apparatus. The method utilized in this study is qualitative. The result of the study shows that in general the participation of State Civil Apparatus in Surabaya is adequately good, but the neutrality of State Civil Apparatus has not implemented well enough. There are at least three (3 main factors influencing the participation of Civil State Apparatus, namely the factors of leadership exemplary, commitment to employees, and employee development. As for the neutrality of the State Civil Apparatus, among others, is influenced by the factors of the ambition of employee, primordialism, and working environment of employees.

  4. The Present State of Behaviorism

    Science.gov (United States)

    Mowrer, O. Hobart

    1976-01-01

    Assesses the present status of behaviorism by dividing this study into an evaluation of Behaviorism 1, based explicitly on Pavlov's conception of conditioned-response learning, and Behaviorism 11, single-handedly launched and almost completely dominanted by Professor B. F. Skinner. (Author/RK)

  5. Simulating the hydrodynamic conditions in the United States Pharmacopeia paddle dissolution apparatus.

    Science.gov (United States)

    McCarthy, Leonard G; Kosiol, Carolin; Healy, Anne Marie; Bradley, Geoff; Sexton, James C; Corrigan, Owen I

    2003-01-01

    The objective of this work was to examine the feasibility of developing a high-performance computing software system to simulate the United States Pharmacopeia (USP) dissolution apparatus 2 (paddle apparatus) and thus aid in characterizing the fluid hydrodynamics in the method. The USP apparatus was modeled using the hydrodynamic package Fluent. The Gambit program was used to create a "wireframe" of the apparatus and generate the 3-dimensional grids for the computational fluid dynamics solver. The Fluent solver was run on an IBM RS/6000 SP distributed memory parallel processor system, using 8 processors. Configurations with and without a tablet present were developed and examined. Simulations for a liquid-filled vessel at a paddle speed of 50 rpm were generated. Large variations in fluid velocity magnitudes with position in the vessel were evident. Fluid velocity predictions were in good agreement with those previously published, using laser Doppler velocity measurements. A low-velocity domain was evident directly below the center of the rotating paddle. The model was extended to simulate the impact of the presence of a cylindrical tablet in the base of the dissolution vessel. The presence of the tablet complicated the local fluid flow, and large fluid shear rates were evident at the base of the compact. Fluid shear rates varied depending on the tablet surface and the location on the surface and were consistent with the reported asymmetrical dissolution of model tablets. The approach has the potential to explain the variable dissolution results reported and to aid in the design/prediction of optimal dissolution conditions for in vitro--in vivo correlations.

  6. Deriving a group psychic apparatus and a typology of group mental states from Bion's group dynamics

    OpenAIRE

    2009-01-01

    There is abundant psychoanalytically-oriented literature which apply Freud's concepts related to his psychic apparatus theory. For instance, many researchers often describe group phenomena in terms of "conscious", "unconscious", "ego", and "superego". However, with the exception of Rene Kas's pioneer work, l'appareil psychic groupal, there is, to the author's knowledge, no study which has discussed explicitly and systematically the group's psychic apparatus. In the present paper the author ha...

  7. Design of Thermal Conductivity Apparatus Base on Transient-state Radial Cylinder Method

    Directory of Open Access Journals (Sweden)

    Bambang Dwi Argo

    2013-01-01

    Full Text Available Thermal properties i.e. thermal conductivity (k of agricultural products provide critical information and data for the design and manufacture of equipment and machines for their processing. Literature generally abounds in information on wide and common agricultural products but lack on some locally grown products. The aim of the present study was to design and construct the thermal conductivity apparatus embedded with controlled temperature system and equipped with record system supported with personal computer as data processor. The apparatus designed based on transient-state radial cylinder method, consist of three main parts i.e. measurement chamber, controls panel and data acquisition processor. Measurement chamber was cylinder equipped by radially sixteen node of thermocouple with controlled temperature heater on center cylinder axis. It was placed in temperature controlled box generated by air flow system to eliminate the effect of surrounding temperature outside chamber. Controls panel functioned as link bridge and control unit that connect the measurement chamber to data acquisition processor. It consists of some electronic circuit e.g. analog to digital converter (ADC to control and acquire data from some thermocouple and sensors. Personal computer as data acquisition processor embedded with software developed with Borland Delphi. Developed software featured with calibrating, recording, calculating mode and displaying all obtained data graphically. Testing procedure was conducted with empty and filled chamber condition to adjust and calibrate data captured by thermocouples and sensors and displayed on personal computer, compared with actual condition. After some adjustment and calibration, all system was well functioned. The outcomes were in good agreements with thermal conductivity (k of agricultural products reported in the literatures.Keywords—

  8. A new quantum gas apparatus for ultracold mixtures of K and Cs and KCs ground-state molecules

    Science.gov (United States)

    Gröbner, M.; Weinmann, P.; Meinert, F.; Lauber, K.; Kirilov, E.; Nägerl, H.-C.

    2016-10-01

    We present a new quantum gas apparatus for ultracold mixtures of K and Cs atoms and ultracold samples of KCs ground-state molecules. We demonstrate the apparatus' capabilities by producing Bose-Einstein condensates of ? and ? in a manner that will eventually allow sequential condensation within one experimental cycle, precise sample overlap and magnetic association of atoms into KCs molecules. The condensates are created independently without relying on sympathetic cooling. Our approach is universal and applicable to other species combinations when the two species show dramatically different behavior in terms of loss mechanisms and post laser cooling temperatures, i.e. species combinations that make parallel generation of quantum degenerate samples challenging. We give an outlook over the next experiments involving e.g. sample mixing, molecule formation and transport into a science chamber for high-resolution spatial imaging of novel quantum-many body phases based on K-Cs.

  9. MEDIA AND CERATTEPE IN TURKEY: ALTHUSSER’S COMMUNICATIONS IDEOLOGICAL STATE APPARATUS [ISA] – ORIENTED ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Huseyin Sevgi

    2016-07-01

    Full Text Available According to Althusser (2000, ideology is just an apparatus which state uses it to control the masses through pressure and authority. He claimed that there is a reality which separate state pressure apparatus and ideology. He used “Ideological State Apparatus” [ISA] for this reality. He told that the ISAs process using ideology and reproduce the current system. In this context neoliberal policies, which have been applied for the last 35 years, have become irresistible with ISAs. Because of reckless approach of these policies to the nature/environment, reactions and resistances have emerged against them. The media [~press] which takes part in Althusser’s communications ISA plays a significant role within this context, because the media has qualification as significative and leader characteristics in relation to notably political choices, cultures, perceptions, life-styles and economical behaviors. In this sense, the state through the media takes on the might of its power and also reproduces the current system. In this study, language of the media in Turkey will be discussed case of Cerattepe-oriented in the context of Althusser’s communications ISA. In addition to this proposal also focuses on how environmental movements in Cerattepe were exposed in pro-government daily news and/or media in Turkey. Finally, it will be deliberated that the ditto media organs introduce the civil initiatives in Cerattepe as a handy apparatus in the name of neoliberal policies and government’s power.

  10. The Present State of Homeric Studies.

    Science.gov (United States)

    Willcock, M. M.

    1967-01-01

    A personal point of view concerning various aspects of Homerica characterizes this brief state-of-the-art report. Commentary is directed to: (1) first readers; (2) the Parry-Lord approach to the study of the "Iliad" and the "Odyssey" as representatives of a type of oral, formulaic, poetry; (3) analysts, unitarians, and…

  11. Olfaction Presentation System Using Odor Scanner and Odor-Emitting Apparatus Coupled with Chemical Capsules of Alginic Acid Polymer

    Science.gov (United States)

    Sakairi, Minoru; Nishimura, Ayako; Suzuki, Daisuke

    For the purpose of the application of odor to information technology, we have developed an odor-emitting apparatus coupled with chemical capsules made of alginic acid polymer. This apparatus consists of a chemical capsule cartridge including chemical capsules of odor ingredients, valves to control odor emission, and a temperature control unit. Different odors can be easily emitted by using the apparatus. We have developed an integrated system of vision, audio and olfactory information in which odor strength can be controlled coinciding with on-screen moving images based on analytical results from the odor scanner.

  12. Development of a high-resolution apparatus to monitor physiological state of a person undergoing extreme conditions

    Directory of Open Access Journals (Sweden)

    Kodermyatov Radik

    2016-01-01

    Full Text Available The present research has shown that ECG recordings and parameters of the body functional state are crucial for all kinds of the astronaut pre-flight preparations (centrifuge, thermal chamber, pressure chamber, pressure chamber with special equipment. It is, therefore, important to develop methods and tools for early detection of the preclinical forms of the functional state disorders in patients undergoing high-intensity loads of mixed character. The method based on the hardware-software compleх (HSC with nanosensors of high resolution has been proposed to measure the electrophysiological characteristics and bioelectrical impedance of the body tissues directly exposed to loading. The hardware-software compleх is subjected to clinical trials in Tomsk Research Institute for Cardiology. The obtained results show that the use of nanosensors of high resolution in the HSC without standard filters allows elimination of the power-line interference in ECG recordings. Monitoring of the tissue bioimpedance parameters under test loads enables the detection of preclinical (latent forms of various diseases. After clinical trials in Tomsk Institute for Cardiology the developed apparatus will be proposed for in-depth study of the cardiovascular system and the functional state of the body of astronauts and other persons exposed to extreme loads.

  13. Pore roller filtration apparatus

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to the field of filtering, more precisely the present invention concerns an apparatus and a method for the separation of dry matter from a medium and the use of said apparatus. One embodiment discloses an apparatus for the separation of dry matter from a medium, comp...

  14. Prehensile apparatus

    Science.gov (United States)

    Smith, C.M.

    1993-10-12

    The present invention relates to an apparatus for handling a workpiece comprising a vessel that is longitudinally extensible and pressurizable, and a nonextensible and laterally flexible member on the vessel. The member constrains one side of the vessel to be nonextensible, causing the vessel to bend in the direction of the nonextensible member when pressurized. 8 figures.

  15. A new apparatus for non-destructive evaluation of green-state powder metal compacts using the electrical-resistivity method

    Science.gov (United States)

    Bogdanov, Gene; Ludwig, Reinhold; Michalson, William R.

    2000-02-01

    This paper presents a new apparatus developed for non-destructive evaluation (NDE) of green-state powder metal compacts. A green-state compact is an intermediate step in the powder metallurgy (PM) manufacturing process, which is produced when a metal powder-lubricant mixture is compacted in a press. This compact is subsequently sintered in a furnace to produce the finished product. Non-destructive material testing is most cost effective in the green state because early flaw detection permits early intervention in the manufacturing cycle and thus avoids scrapping large numbers of parts. Unfortunately, traditional NDE methods have largely been unsuccessful when applied to green-state PM compacts. A new instrumentation approach has been developed, whereby direct currents are injected into the green-state compact and an array of spring-loaded needle contacts records the voltage distributions on the surface. The voltage distribution is processed to identify potentially dangerous surface and sub-surface flaws. This paper presents the custom-designed hardware and software developed for current injection, voltage acquisition, pre-amplification and flaw detection. In addition, the testing algorithm and measurement results are discussed. The success of flaw detection using the apparatus is established by using controlled samples, which are PM compacts with dielectric inclusions inserted.

  16. The Terminology of Literary Criticism:Ideological State Apparatuses%意识形态国家机器

    Institute of Scientific and Technical Information of China (English)

    孟登迎

    2004-01-01

    一句话概说。意识形态国家机器,英文写作Ideological State Apparatuses,简称ISAs。该词源自法文Appareils Ideogiques d'Etat,是法国左派思想家路易·阿尔都塞(Louis Althusser)首创的一个概念。阿尔都塞率先将意识形态问题纳入社会物质生产结构当中进行讨论,在很大程度上绕开了将意识形态当成精神现

  17. Changing climate states and stability: from Pliocene to present

    Energy Technology Data Exchange (ETDEWEB)

    Livina, V.N.; Lenton, T.M. [University of East Anglia, School of Environmental Sciences, Norwich (United Kingdom); Kwasniok, F. [University of Exeter, College of Engineering, Mathematics and Physical Sciences, Exeter (United Kingdom); Lohmann, G. [Alfred Wegener Institute for Polar and Marine Research, Bremerhaven (Germany); Kantelhardt, J.W. [Martin-Luther-Universitaet Halle-Wittenberg, Institute of Physics, Theory group, Halle (Germany)

    2011-12-15

    We present a recently developed method of potential analysis of time series data, which comprises (1) derivation of the number of distinct global states of a system from time series data, and (2) derivation of the potential coefficients describing the location and stability of these states, using the unscented Kalman filter (UKF). We test the method on artificial data and then apply it to climate records spanning progressively shorter time periods from 5.3 Myr ago to the recent observational record. We detect various changes in the number and stability of states in the climate system. The onset of Northern Hemisphere glaciation roughly 3 Myr BP is detected as the appearance of a second climate state. During the last ice age in Greenland, there is a bifurcation representing the loss of stability of the warm interstadial state, followed by the total loss of this state around 25 kyr BP. The Holocene is generally characterized by a single stable climate state, especially at large scales. However, in the historical record, at the regional scale, the European monthly temperature anomaly temporarily exhibits a second, highly degenerate (unstable) state during the latter half of the eighteenth century. At the global scale, temperature is currently undergoing a forced movement of a single stable state rather than a bifurcation. The method can be applied to a wide range of geophysical systems with time series of sufficient length and temporal resolution, to look for bifurcations and their precursors. (orig.)

  18. The Present State of Economic Education in Japan

    Science.gov (United States)

    Yamaoka, Michio; Asano, Tadayoshi; Abe, Shintaro

    2010-01-01

    The authors describe the present state of economic education in Japan. There is a larger number of undergraduate students who major in economics, but their purpose of studying economics and their economic literacy differ. Precollege economic education is regulated by the course of study and limited by the poor ability of teachers to teach the…

  19. Japanese superconducting maglev: Present state and future perspective

    Science.gov (United States)

    Takeda, Hiroshi

    1990-06-01

    Maglev (magnetic levitation vehicle) being developed as a new transportation means running at a speed of 500 km/h has various advantages in safety, mass transportation and less environment polution as well as high-speed. The development of this system is rapidly advancing into the practical stage, that is, the commercial stage of the maglev train as a mass transportation system for intercity high-speed service. This paper describes the present state of research and development as well as future prospects of maglev.

  20. A Critical Approach to Discipline of Human Geography as an Apparatus for State Hegemony in Turkey

    Science.gov (United States)

    Özgen, Nurettin

    2016-01-01

    This study examines the hegemony of political power on the discipline of human geography in Turkey. Throughout the history of the country, human geography curricula have been aligned with the nationalist and hegemonic power politics of state authorities instead of being guided by universal norms, thus ignoring Turkey's sociopolitical and cultural…

  1. PRESENTATION OF STATE SUPPORT (GRANTS IN ACCOUNTING POLICY OF POLAND

    Directory of Open Access Journals (Sweden)

    K. Zuk

    2014-01-01

    Full Text Available Since admission of Poland to the European Union Polish enterprises can make use of the state support in various forms including support in investments, investigations and developments, consulting, higher qualification, financing of exhibition participation, salary additional payments for invalid workers, repayment of loan portions. The purpose of the given publication is to make an analysis of accounting method for state support which is granted for an organization within the frameworks of the accounting policy depending on the obtained grants.Enterprises must select themselves a grant accounting form as in account books so while presenting financial reporting and these accounting and reporting forms must be reflected in the enterprise policy of accounting. The enterprise accounting policy indicates principles for creation of reserves and conditional obligations related with grants. Enterprises can use some simplifications and they can exclude creation of reserves and withhold conditional obligations concerning the grants if these measures are considered as insignificant.In accordance with the enterprise accounting policy account books must contain recordings on grant provision when a grant is transferred to the bank account or when an enterprise receives a written notice confirming final decision about payments from a financing institution. The accounting policy must determine principles of bank operation break-up on grant accounts and security system of data and files including accounting documents, accounts and other documents related to the obtained grant and the required archivation term

  2. Presentation Entanglement states and its application in quantum computation

    Directory of Open Access Journals (Sweden)

    Yadollah Farahmand

    2014-06-01

    Full Text Available In this article we will consider the entanglement states and we will formulate the density matrix and the expectation value of entanglement state to mathematics and also we will explain the applications of entanglement states in superdense coding and sending information ( qubits transfer.

  3. Presentation

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Freire Vieira

    2013-12-01

    Full Text Available This dossier focuses on one of the essential debate topics today about the territorial dimension of the new development strategies concerned with the worsening of the global socioecological crisis, that is: the challenges related to the activation and integration in networks of localized agri-food systems. For its composition, some contributions presented and debated during the VI International Conference on Localized Agri-food System - The LAFS facing the opportunities and challenges of the new global context have been gathered. The event took place in the city of Florianópolis, from May 21th to 25th of 2013. The event was promoted by the Federal University of Santa Catarina (UFSC and by the Center for the International Cooperation on Agricultural Research for Development (CIRAD. Besides UFSC and CIRAD, EPAGRI, State University of Santa Catarina (UDESC, as well as research institutes and universities from other states (UFMG, IEA/SP, UFS, UFRGS and Mexican and Argentinian partners from the RED SIAL Latino Americana also participated in the organization of lectures, discussion tables and workshops.

  4. Present state and perspectives of spa tourism development in Serbia

    Directory of Open Access Journals (Sweden)

    Jovičić Dobrica

    2008-01-01

    Full Text Available Apart from very contaminated spatial areas, there are places with attractive and non-polluted environment, that are suitable for tourism and recreation. Such places are spa resorts, characterized by numerous and various natural elements having significant health and recreative functions (thermo-mineral springs, rare gases, favorable climatic conditions, rich vegetation, etc., which attract attention of ample tourist demand. Serbia is welknown as a 'country of spa resorts', because of a great number of thermo-mineral springs, long tradition and their significance for tourism economy. Official statistical service keeps records of tourist flows only at 30 spa resorts (approximately, having participation at 95% of the total tourist trade in Serbia's spas. The topic of this paper is devoted to estimation of the present state and perspectives of spa tourism in Serbia. Special attention is focused on: analysis of resources for spa tourism, discussion of key factors for tourist valorization of Serbia's spas, investigation of structural features of spa tourism, comparison of Serbia's experiences in domain of spa tourism with contemporary trends in certain spa resorts in other European countries, and, finally, defining the most important tasks for spa tourism improvement.

  5. THE GREATER CENTRAL ASIA PROJECT: PRESENT STATE AND EVOLUTION

    OpenAIRE

    Tulepbergenova, Gulsana

    2009-01-01

    The Greater Central Asia (GCA) project initiated in 2005 confirmed that the United States treated the region as a foreign policy and security priority. The project was primarily promoted by the changed balance of forces in favor of Russia and partly China, which called for an adequate strategic and geopolitical response. At the same time, the Greater Central Asia idea can be viewed as a conceptual and ideological substantiation of what the United States is trying to accomplish in the region. ...

  6. Identifying interfacial charge transfer states in organic heterostructures (Conference Presentation)

    Science.gov (United States)

    Arndt, Andreas P.; Gerhard, Marina; Howard, Ian A.; Koch, Martin; Lemmer, Ulrich

    2016-09-01

    Charge transfer (CT) states play evidently an important role at the interface of organic heterostructures but their identification and characterization is often experimentally less obvious and challenging. We studied two exemplary material systems which both represented a benchmark within the research of organic photovoltaics at their time: the homopolymer P3HT blended with PC61BM and the copolymer PTB7 blended with PC71BM. In both heterostructures, we could identify a distinct CT state emission by the use of NIR time-resolved photoluminescence (PL) [1], [2]. The selectivity of this technique enables us to clearly probe the energetics and dynamics of weak emitting interfacial states and therefore to prove differences in the CT state characteristics between the two systems. We went beyond this previous work and investigated the time and temperature dependent emission anisotropy as well as the electric field dependence of the time-resolved PL for both blends and the pristine polymers, respectively. In both cases the CT state emission clearly deviates from the one of the primarily excited singlet excitons: the emission anisotropy reveals an additional relaxation pathway for the exciton which is connected with a change of the transition dipole moment of the emission, and under applied bias different quenching thresholds can give access to varying binding energies of the emissive excitons involved. Finally, we think that our findings demonstrate how interfacial CT state emission can be clearly identified as such and how it can be unambiguously distinguished from singlet exciton emission.

  7. TRANSFORMER APPARATUS

    Science.gov (United States)

    Wolfgang, F.; Nicol, J.

    1962-11-01

    Transformer apparatus is designed for measuring the amount of a paramagnetic substance dissolved or suspended in a diamagnetic liquid. The apparatus consists of a cluster of tubes, some of which are closed and have sealed within the diamagnetic substance without any of the paramagnetic material. The remaining tubes are open to flow of the mix- ture. Primary and secondary conductors are wrapped around the tubes in such a way as to cancel noise components and also to produce a differential signal on the secondaries based upon variations of the content of the paramagnetic material. (AEC)

  8. On Present State of Teaching Russian Language in Russia

    Science.gov (United States)

    Tekucheva, Irina V.; Gromova, Liliya Y.

    2016-01-01

    The article discusses the current state of teaching Russian language, discovers the nature of philological education, outlines the main problems of the implementation of the standard in school practice, analyzes the problems of formation of universal educational actions within the context of the implementation of cognitive-communicative approach,…

  9. communication method and apparatus

    DEFF Research Database (Denmark)

    2005-01-01

    The present invention relates to a non-lingual communication method and apparatus, wherein a physical or physiological signal consciously created by a first subject (1) is detected and converted into a transmitted output signal presented to a second subject (7) in order to communicate information...

  10. Presentation

    Directory of Open Access Journals (Sweden)

    Eduardo Vicente

    2013-06-01

    effectivities more than a number of fixed essential characteristics. Luiz Artur Ferrareto (UFRGS, undertaking a theoretical proposal for categorizing radio content in four different levels of planning (segment, form, programming and content itself tries to “compare and contrast the practices of Brazilian commercial broadcasting companies to those used on the radio in the United States, a reference market for our national entrepreneurs”. Madalena Oliveira (University of Minho focuses on the current stage of communication researches in Portugal reflecting on the challenges for studying a culture based on listening in times of looking. Marko Ala-Fossi, (University of Tampere beginning with the statement that “radio evolution greatly depends not only on the cultural context of a country but also on the whole social, political, economic development of societies” gives us a projection on radio development around the world for the next decades. Closing the dossier, Rafael Duarte Oliveira Venancio (UFU assuming radio as language by definition and not as a device understands it as a section and an operating model in such language as it intersects the world. Another six articles, not enrolled in the dossier, round the edition off. Fernando de Tacca debates the category of “photocine” recurring to three recent Spanish productions. Gustavo Souza investigates the possibility of identifying a point of view in documentary movies while establishing a debate that joins the materialities of image and sound with the subjectivity resulting from interpretation. Vinicius Bandeira develops on the special duplicity present in the movies between what is and what is not subsumed by the camera. Neide Jallageas proposes the study of visual communication design from the first modelings, attempting especially to the radical propositions from the early XXth century avant-garde movement. Gilson Schwartz debates on the impact from the distribution of videogames as hegemonic cultural practice in

  11. THE HISTORY OF THE S PROCESS AND ITS PRESENT STATE

    Directory of Open Access Journals (Sweden)

    Giora Shaviv

    2013-12-01

    Full Text Available We review the history and the present status of the s-process and point to problems in need of clarification. In some cases it has to do with lack of experimental data and in other the theory is missing.

  12. On the Present State of Information Society Studies.

    Science.gov (United States)

    Duff, Alistair S.

    2001-01-01

    Assesses the present condition of the emerging specialism of information society studies. Topics include the information economy; information technology; the information explosion; the Japanese version of information society; information society as social democracy; sociology and information science; scholarly journals; and the need for…

  13. PRESENT STATE AND THE PERSPECTIVES OF SMS MARKETING IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Mihai COSTEA

    2014-06-01

    Full Text Available The SMS (Short Message Service,which emerged at the beginning of the 90s as a result of the telephone services’ need for diversification, it is now used in the communication campaigns involving customized messaging, but also in general messaging campaigns sent both to the existing clients and to the potential ones. Thus, the SMS became widely used, turning into one of the most popular instruments of Mobile marketing and, soon becoming a separate concept named the SMS Marketing. Although there is the preconception that the mobile marketing and, namely, the SMS marketing is intended to be used primarily by the big corporations, which have the power and also the availability to invest substantial amounts of money in this sort of programs, the present paper intends precisely to debunk these preconceptions and, hence, to present the advantage of such marketing campaigns for the segment consisting of small and middle companies in Romania.

  14. Current State of the Voluntary Renewable Energy Market (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, J.

    2013-09-01

    This presentation highlights the status of the voluntary green power market in 2012. The voluntary green power market totaled more than 48 million MWh in 2012, with about 1.9 million customers participating. The supply continues to be dominated by wind, though solar is increasing its share of utility green pricing programs. Prices for voluntary renewable energy certificates (RECs) increased to above $1/MWh.

  15. The Surface and Atmosphere of Venus: Evolution and Present State

    Science.gov (United States)

    Grinspoon, David

    Most models of atmospheric evolution start with the reasonable but unverified assumption that the original atmospheric inventories of Venus and Earth were similar. Although the two planets have similar overall abundances of nitrogen and carbon, the present day water inventory of Venus is lower than that of Earth by a factor of 105. The original water abundance of Venus is highly unconstrained. The high D/H ratio observed, 2.5 ×10- 2 or ≈ 150 times terrestrial (Donahue et al. 1997) has been cited as evidence of a large primordial water endowment (Donahue et al. 1982). Yet, given the likelihood of geologically recent water sources and the large uncertainty in the modern and past hydrogen and deuterium escape fluxes, the large D/H may not reflect the primordial water abundance but rather may result from the history of escape and resupply in the most recent ≈ 109 years of planetary evolution (Donahue et al. 1997, Grinspoon 1993, 1997). Thus, at present the best arguments for a sizable early Venusian water endowment remain dependent on models of planet formation and early volatile delivery. Most models of water delivery to early Earth involve impact processes that would have also supplied Venus with abundant water (Grinspoon 1987, Ip et al. 1998, Morbidelli et al. 2000). Stochastic processes could have created large inequities in original volatile inventory among neighboring planets (Morbidelli et al. 2000). However, given the great similarity in bulk densities and their close proximity in the Solar System the best assumption at present is that Venus and Earth started with similar water abundances.

  16. History and present state of the Slano Blato landslide

    Directory of Open Access Journals (Sweden)

    J. Logar

    2005-01-01

    Full Text Available The Slano Blato landslide is more than 1290m long, 60 to 200m wide and 3 to 11m deep with a volume of about 700000m3. It is located in the Eocene flysch region of western Slovenia with a limestone overthrust in the direct vicinity, above the landslide. The landslide moves mainly as a viscous earth flow with occurrences of rapid mud flows. In dry periods or in freezing conditions it behaves as a group of several slow to moderate landslides. The landslide follows the course of the Grajšček stream and is presently only 220m away from Lokavec village. The landslide was first mentioned about 200 years ago. In 1887 it flowed as a liquid flow and reached and destroyed the main road in the valley 2 km away. The Austro-Hungarian monarchy sent one engineer to the site and 17 years later the slide was remediated with a series of torrential check dams. The monarchy prohibited any construction works in the influence area of the landslide. During the 20th century the region changed from Austrian, Italian, Yugoslav, and finally to Slovenian government in 1991. The relevant Austrian measures and decisions were forgotten during the course of the years, and building permits were issued after the World War II to local people who populated the part of the landslide influence area. Simultaneously, regular maintenance of the excellent past engineering works was neglected. In November 2000 a large landslide of mud and debris was triggered again and it still presents a danger to the relatively new residential houses today. At present, the village is protected against mudflows by a small rockfill dam and by the regulation of the stream bed. In rainy periods removal of mud is necessary to maintain safe conditions for the village. The paper discusses the geological, hydrogeological, hydrological and geotechnical conditions for the occurrence of the Slano Blato landslide. The primary reasons for the Slano blato landslide are the geological and hydrogeological conditions

  17. Myofibrillar myopathies: State of the art, present and future challenges.

    Science.gov (United States)

    Béhin, A; Salort-Campana, E; Wahbi, K; Richard, P; Carlier, R-Y; Carlier, P; Laforêt, P; Stojkovic, T; Maisonobe, T; Verschueren, A; Franques, J; Attarian, S; Maues de Paula, A; Figarella-Branger, D; Bécane, H-M; Nelson, I; Duboc, D; Bonne, G; Vicart, P; Udd, B; Romero, N; Pouget, J; Eymard, B

    2015-10-01

    Myofibrillar myopathies (MFM) have been described in the mid-1990s as a group of diseases sharing common histological features, including an abnormal accumulation of intrasarcoplasmic proteins, the presence of vacuoles and a disorganization of the intermyofibrillar network beginning at the Z-disk. The boundaries of this concept are still uncertain, and whereas six genes (DES, CRYAB, LDB3/ZASP, MYOT, FLNC and BAG3) are now classically considered as responsible for MFM, other entities such as FHL1 myopathy or Hereditary Myopathy with Early Respiratory Failure linked to mutations of titin can now as well be included in this group. The diagnosis of MFM is not always easy; as histological lesions can be focal, and muscle biopsy may be disappointing; this has led to a growing importance of muscle imaging, and the selectivity of muscle involvement has now been described in several disorders. Due to the rarity of these myopathies, if some clinical patterns (such as distal myopathy associated with cardiomyopathy due to desmin mutations) are now well known, surprises remain possible and should lead to systematic testing of the known genes in case of a typical histological presentation. In this paper, we aim at reviewing the data acquired on the six main genes listed above as well as presenting the experience from two French reference centres, Paris and Marseilles.

  18. Immunotherapy of chronic myeloid leukemia: present state and future prospects.

    Science.gov (United States)

    Vonka, Vladimír

    2010-03-01

    In spite of the considerable successes that have been achieved in the treatment of chronic myeloid leukemia (CML), cure for the disease can only be obtained by the present means in a rather small minority of patients. During the past decade, considerable progress has been made in the understanding of the immunology of CML, which has raised hopes that this disease may be curable by supplementing the current targeted chemotherapy with immunotherapeutic approaches. More than ten small-scale clinical trials have been carried out with experimental vaccines predominantly based on the p210bcr-abl fusion protein. Their results suggested beneficial effects in some patients. Recent data obtained in human patients as well as in animal models indicate that the p210bcr-abl protein does not carry the immunodominant epitope(s). These observations, combined with the recognition of an ever increasing number of other immunogenic proteins in CML cells, strongly support the concept that gene-modified, cell-based vaccines containing the full spectrum of tumor antigens might be the most effective immunotherapeutic approach. Recently created mathematical models have provided important leads for the timing of the combination of targeted drug therapy with vaccine administration. A strategy of how targeted drug therapy might be combined with vaccination is outlined.

  19. Thermal stir welding apparatus

    Science.gov (United States)

    Ding, R. Jeffrey (Inventor)

    2011-01-01

    A welding method and apparatus are provided for forming a weld joint between first and second elements of a workpiece. The method includes heating the first and second elements to form an interface of material in a plasticized or melted state interface between the elements. The interface material is then allowed to cool to a plasticized state if previously in a melted state. The interface material, while in the plasticized state, is then mixed, for example, using a grinding/extruding process, to remove any dendritic-type weld microstructures introduced into the interface material during the heating process.

  20. Existing machine propulsion is transformed by state-of-the-art gearbox apparatus saves at least 50% energy

    Science.gov (United States)

    Abramov, V.

    2013-12-01

    This innovation on www.repowermachine.com is finalist at Clean-tech and Energy of 2012 Minnesota's TEKNE AWARDS. Vehicles are pushed by force of friction between their wheels and land, propellers and water or air according to Third Newton's law of physics of moving. Force of friction is dependent to vehicle weight as highest torque of wheel or propeller for vehicle moving from stop. Friction force DOES NOT dependent to motor power. Why existing SUV of 2,000 lb uses 550 hp motor when first vehicle has 0.75 hp motor (Carl Benz';s patent #37435, January 29, 1886 in Germany)? Gas or magnet field reaches needed torque of wheels too slowly because requires huge motor power for acceleration SUV from 0 to 100 mph for 5 second. The acceleration system by gas or magnet field uses additional energy for increasing motor shaft idle speed and reduces its highest torque of physical volume because necessary to increase motor power that equal/exceed motor power according to vehicle weight. Therefore, any transmission torque DOES NOT NEED and it is use as second brake. Ship, locomotives, helicopters, CNC machine tools, etc motor(s) directly turn wheels, propellers, spindles or ignore to use gear -transmission designs. How do you follow to Creator's physics law of LEVER for saving energy? Existing machine propulsion is transformed by one comprising least numbers of gears and maybe shafts from above state-of-the-art 1,000 gearbox apparatus designs. It is installed or replaced transmission in existing propulsion that is transformed to non-accelerated propulsion. It cuts about 80% mechanical energy that acceleration system wastes in motor heat form, cuts time of movement by reaching each speed for 1-2 seconds. It produces all needed speeds and uses only idle speed of cheapest motor with reduced power and cost that have replaced existing motor too. There is opportunity to eliminate vehicle/machine roads traffics in cities that creates additional unknown GHG emissions Revolutionary

  1. Presentation

    Directory of Open Access Journals (Sweden)

    Helmut Renders

    2008-10-01

    Full Text Available We present to our esteemed readers the second edition of our journal for 2008. We have chosen the theme “The life and work of Prof. Dr. Jürgen Moltmann” as its special emphasis. It is our way to pay homage to J. Moltmann in the year the Universidade Metodista de São Paulo awards him an honorary Doctor Honoris Causa degree. Sincethe seventies, Moltmann and Latin America have been in dialog. In his emblematic work “A Theology of Liberation”, Gustavo Gutiérrez, the Catholic, discussed with Moltmann, the Reformed, the relationship between eschatology and history (GUTIÉRREZ, Gustavo.Teologia da Libertação. 5ª edição. Petrópolis, RJ: Vozes, 1985, p. 27, 137-139. A dialog held in the premises of IMS, which nowadays is called UMESP, has produced the little book “Passion for life” (MOLTMANN, Jürgen. Paixão pela vida. São Paulo, SP: ASTE - Associaçãode Seminários Teológicos Evangélicos, 1978.In the following years, the wide theological work of J. Moltmann went all the way from debates to congresses and has conquered the classrooms. Most probably, J. Moltmann is nowadays the most widely read European author in Brazilian theological seminaries. Thisrecognition can only be held in unison and the wide response to our request for articles confirms the huge repercussion that Moltmann’s work has been having up to today in Brazil. The ecumenical theologian J. Moltmann is ecumenically read. We believe that thisway we may be better equipped to answer to anyone who asks us for the reason there is hope in us. We have organized the articles on J. Moltmann’s theology according to the original publication date of the books dealt with in each essay. We also communicate that some articles which were originally requested for this edition of the journal will be published in the journal Estudos de Regilião in May 2009.As it is usual with the journal Caminhando, we have, besides this thematic emphasis, yet other contributions in the areas of

  2. Microelectromechanical acceleration-sensing apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Robb M. (Albuquerque, NM); Shul, Randy J. (Albuquerque, NM); Polosky, Marc A. (Albuquerque, NM); Hoke, Darren A. (Albuquerque, NM); Vernon, George E. (Rio Rancho, NM)

    2006-12-12

    An acceleration-sensing apparatus is disclosed which includes a moveable shuttle (i.e. a suspended mass) and a latch for capturing and holding the shuttle when an acceleration event is sensed above a predetermined threshold level. The acceleration-sensing apparatus provides a switch closure upon sensing the acceleration event and remains latched in place thereafter. Examples of the acceleration-sensing apparatus are provided which are responsive to an acceleration component in a single direction (i.e. a single-sided device) or to two oppositely-directed acceleration components (i.e. a dual-sided device). A two-stage acceleration-sensing apparatus is also disclosed which can sense two acceleration events separated in time. The acceleration-sensing apparatus of the present invention has applications, for example, in an automotive airbag deployment system.

  3. Presentation

    Directory of Open Access Journals (Sweden)

    Nicanor Lopes

    2010-11-01

    Full Text Available The Journal Caminhando debuts with a new editorial format: eachmagazine will have a Dossier.In 2010 Christianity celebrated the centenary of Edinburgh. TheWorld Missionary Conference in Edinburgh in 1910 is regarded by manyas missiological watershed in the missionary and ecumenical movement.So the Faculty of Theology of the Methodist Church (FATEO decidedto organize a Wesleyan Week discussing the issue of mission. For anevent of this magnitude FATEO invited the Rev. Dr. Wesley Ariarajah,Methodist pastor and teacher of Sri Lanka with extensive experience inpastoral ministry in local churches and professor of History of Religionsand the New Testament at the Theological College of Lanka, maintainedby the Protestant Churches in Sri Lanka. In 1981 he was invited to jointhe World Council of Churches, where he presided for over ten years theCouncil of Interreligious Dialogue. From 1992 he served as Deputy GeneralSecretary of the WCC.The following texts are not the speeches of the Rev. Dr. WesleyAriarajah, for they will be published separately. Nevertheless, the journaldialogs with the celebrations of the centenary of Edinburgh, parting formthe intriguing theme: "Mission in the 21st century in Brazil". After all, howis it that mission takes place among us in personal, church, and communityactivities?Within the Dossier, as common to the journal, the textos are organizedas follows: Bible, Theology / History and Pastoral Care. Other items thatdo not fit within the Dossier, but, do articulate mission, can be found inthe section Declarations and Documents and Book Reviews.The authors of the Dossier have important considerations in buildinga contemporary missiological concept considering Brazilian reality.Anderson de Oliveira, in the Bible-Section, presents a significantexegeses of Matthew 26.6-13. What does it mean when Jesus is quotedwith the words: "For the poor always ye have with you, but me ye havenot always." Is this declaration challenging the gospels

  4. 49 CFR 24.208 - Aliens not lawfully present in the United States.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Aliens not lawfully present in the United States... Requirements § 24.208 Aliens not lawfully present in the United States. (a) Each person seeking relocation... of an individual, that he or she is either a citizen or national of the United States, or an...

  5. Quantifying the Level of Cross-State Renewable Energy Transactions (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Heeter, J.; Beiter, P.; Flores, F.; Hurlbut, D.; Liu, C.

    2015-02-01

    This presentation and associated spreadsheet examine the level of cross-state renewable energy transactions. Most state renewable portfolio standard (RPS) policies allow for out-of-state renewable energy or renewable energy certificates to count towards compliance. This analysis focuses on compliance for 2012 and provides stakeholders with an understanding of the extent to which RPSs are being met.

  6. Present State and Prospects of Bilingual Education in Xinjiang: An Ethnographic Perspective

    Science.gov (United States)

    Anaytulla, Guljennet

    2008-01-01

    This article, based mainly on specific examples from the author's ethnographic fieldwork, outlines the state of bilingual education in Xinjiang and reviews its development. First, a broad outline is presented of the overall circumstances of bilingual education in China and Xinjiang. Next is an introduction to the present state of bilingual…

  7. Extended range chemical sensing apparatus

    Science.gov (United States)

    Hughes, Robert C.; Schubert, W. Kent

    1994-01-01

    An apparatus for sensing chemicals over extended range of concentrations. In particular, first and second sensors each having separate, but overlapping ranges for sensing concentrations of hydrogen are provided. Preferably, the first sensor is a MOS solid state device wherein the metal electrode or gate is a nickel alloy. The second sensor is a chemiresistor comprising a nickel alloy.

  8. Large Rotor Test Apparatus

    Data.gov (United States)

    Federal Laboratory Consortium — This test apparatus, when combined with the National Full-Scale Aerodynamics Complex, produces a thorough, full-scale test capability. The Large Rotor Test Apparatus...

  9. Fastening apparatus having shape memory alloy actuator

    Science.gov (United States)

    Mckinnis, Darin N. (Inventor)

    1992-01-01

    A releasable fastening apparatus is presented. The device includes a connecting member and a housing. The housing supports a gripping mechanism that is adapted to engage the connecting member. A triggering member is movable within the housing between a first position in which it constrains the gripping mechanism in locked engagement with the connecting member, and a second position in which the gripping mechanism is disengaged from the connecting member. A shaped memory alloy actuator is employed for translating the triggering member from its first to its second position. The actuator is designed to expand longitudinally when transitioned from a martensitic to an austenitic state.

  10. Annihilation detector for an in-beam spectroscopy apparatus to measure the ground state hyperfine splitting of antihydrogen

    Science.gov (United States)

    Sauerzopf, Clemens; Capon, Aaron A.; Diermaier, Martin; Fleck, Markus; Kolbinger, Bernadette; Malbrunot, Chloé; Massiczek, Oswald; Simon, Martin C.; Vamosi, Stefan; Zmeskal, Johann; Widmann, Eberhard

    2017-02-01

    The matter-antimatter asymmetry observed in the universe today still lacks a quantitative explanation. One possible mechanism that could contribute to the observed imbalance is a violation of the combined Charge-, Parity- and Time symmetries (CPT). A test of CPT symmetry using anti-atoms is being carried out by the ASACUSA-CUSP collaboration at the CERN Antiproton Decelerator using a low temperature beam of antihydrogen-the most simple atomic system built only of antiparticles. While hydrogen is the most abundant element in the universe, antihydrogen is produced in very small quantities in a laboratory framework. A detector for in-beam measurements of the ground state hyperfine structure of antihydrogen has to be able to detect very low signal rates within high background. To fulfil this challenging task, a two layer barrel hodoscope detector was developed. It is built of plastic scintillators with double sided readout via Silicon Photomultipliers (SiPMs). The SiPM readout is done using novel, compact and cost efficient electronics that incorporate power supply, amplifier and discriminator on a single board. This contribution will evaluate the performance of the new hodoscope detector.

  11. A FILTRATION METHOD AND APPARATUS

    DEFF Research Database (Denmark)

    2003-01-01

    The present invention concerns a method and an apparatus for separating dry matter from liquid, comprising providing an enclosed separation environment capable of being pressure regulated, and in said enclosed separation environment contacting at least one filter with a suspension accumulating dr...

  12. Radiative Gasification Apparatus

    Data.gov (United States)

    Federal Laboratory Consortium — This apparatus, developed at EL, determines gasification rate (mass loss rate) of a horizontally oriented specimen exposed in a nitrogen environment to a controlled...

  13. [Design of the Rolling Type Nasal Feeding Perfusion Apparatus].

    Science.gov (United States)

    Yu, Dong; Yang, Yonghuan; Hu, Huiqin; Luo, Hongjun; Feng, Yunhao; Hao, Xiali

    2015-09-01

    At present, the existing problem in nasal feeding perfusion apparatus is laborious and instability. Designing the rolling type perfusion apparatus by using a roller pump, the problem is solved. Compared with the traditional perfusion apparatus, the advantage lies in liquid carrying only need once and simulating human swallowing process. Through testing and verification, the apparatus can be used in nasal feeding perfusion for elderly or patients.

  14. Cost of Wind Energy in the United States: Trends from 2007 to 2012 (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Hand, M.

    2015-01-01

    This presentation provides an overview of recent technology trends observed in the United States including project size, turbine size, rotor diameter, hub height, annual average wind speed, and annual energy production. It also highlights area where system analysis is required to fully understand how these technology trends relate to the cost of wind energy.

  15. Evaluation of solid-state forms present in tablets by Raman spectroscopy.

    Science.gov (United States)

    Taylor, L S; Langkilde, F W

    2000-10-01

    In this study the potential of Fourier transform (FT)-Raman spectroscopy as a method to probe the solid-state form of active substances present in tablets and capsules is explored. Raman spectra were obtained from intact tablets and capsules containing enalapril maleate, prednisolone, form I and form II polymorphs of ranitidine, anhydrous and monohydrate theophylline, and warfarin sodium clathrate. Spectra were also collected from the corresponding drug substances. These studies show that it is possible to detect the active ingredients in the intact dosage form, even where the substance comprises tablet. Moreover, it is shown that, in some cases, Raman spectroscopy can also be used to investigate the solid-state form of a drug present in the dosage form and even to determine if a mixture of forms are present.

  16. Apparatus for Teaching Physics.

    Science.gov (United States)

    Gottlieb, Herbert H., Ed.

    1981-01-01

    Describes: (1) a variable inductor suitable for an inductance-capacitance bridge consisting of a fixed cylindrical solenoid and a moveable solenoid; (2) long-range apparatus for demonstrating falling bodies; and (3) an apparatus using two lasers to demonstrate ray optics. (SK)

  17. Aerosol distribution apparatus

    Science.gov (United States)

    Hanson, W.D.

    An apparatus for uniformly distributing an aerosol to a plurality of filters mounted in a plenum, wherein the aerosol and air are forced through a manifold system by means of a jet pump and released into the plenum through orifices in the manifold. The apparatus allows for the simultaneous aerosol-testing of all the filters in the plenum.

  18. Clean Energy Manufacturing: U.S. Competitiveness and State Policy Strategies (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.

    2014-02-01

    The capital intensive nature of clean energy technologies suggests that manufacturing clean energy equipment has the potential to support state and local economic development efforts. However, manufacturing siting decisions tend to be complex and multi-variable decision processes that require in-depth knowledge of specific markets, the logistical requirements of a given technology, and insight into global clean tech trends. This presentation highlights the potential of manufacturing in supporting economic development opportunities while also providing examples of the financial considerations affecting manufacturing facility siting decisions for wind turbine blades and solar PV. The presentation also includes discussion of other more qualitative drivers of facility siting decisions as gleaned from NREL industry interviews and discusses strategies state and local policymakers may employee to bolster their chances of successfully attracting clean energy manufacturers to their localities.

  19. Present and future nitrogen deposition to national parks in the United States: critical load exceedances

    OpenAIRE

    Ellis, R. A.; D. J. Jacob; M. P. Sulprizio; Zhang, L.; C. D. Holmes; Schichtel, B. A.; Blett, T.; Porter, E.; Pardo, L. H.; Lynch, J.A.

    2013-01-01

    National parks in the United States are protected areas wherein the natural habitat is to be conserved for future generations. Deposition of anthropogenic nitrogen (N) transported from areas of human activity (fuel combustion, agriculture) may affect these natural habitats if it exceeds an ecosystem-dependent critical load (CL). We quantify and interpret the deposition to Class I US national parks for present-day and future (2050) conditions using the GEOS-Chem global chemical transport ...

  20. Presentation to Ohio State University Dept. of Electrical Engineering ElectroScience Laboratory

    Science.gov (United States)

    Fujikawa, Gene

    2002-01-01

    Presentation made during visit to The Ohio State University, ElectroScience Laboratory, on November 14, 2002. An overview of NASA and selected technology products from the Digital Communications Technology Branch (5650) for fiscal year 2003 are highlighted. The purpose of the meeting was to exchange technical information on current aeronautics and space communications research and technology being conducted at NASA Glenn Research Center and to promote faculty/student collaborations of mutual interest.

  1. The Present State and Future Perspective of Biomedical Engineering in Japan

    Science.gov (United States)

    2007-11-02

    The Present State and Future Perspective of Biomedical Engineering in Japan Shunsuke Sato (Osaka University, Graduate School of Engineering...21st century is a century of life sciences. Biomedical engineering is a field of integrated science and biotechnology, a paradigm where the basic... biomedical engineering and technological development in Japan. The number of members of the society was 900 at the time of establishment, but has

  2. The 'present state' examination and the structured clinical interview in Zulu.

    Science.gov (United States)

    Buntting, B G; Wessels, W H

    1991-01-19

    The language, cultural and reality factors found to be important in the Zulu translation of the 'present state' examination (PSE) and the structured clinical interview for the Diagnostic and Statistical Manual of Mental Disorders (SCID) are discussed and compared with a previous translation of the PSE in Xhosa. The psychopathological items of the PSE and SCID apply to Zulu-speaking patients and the instruments are valid in this setting.

  3. Present State of Explosion Seismic Wave Research and Primary Investigation on Its Characteristics

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The present state and the significance of research on explosion seismic waves are discussed, and meanwhile the main contents and the basic problems to be solved in the study of explosion seismic waves are analyzed. The spectra characteristics of explosion seismic waves, functions of the isolated-seismic grooves and influences of the detonating methods on explosion seismic waves are investigated by experiments. The experimental method is introduced. Some experimental results are presented which are concerned with the influences of topographical conditions, explosive charges, ignition patterns, isolated-seismic grooves and the other related factors on the characteristics of seismic waves.

  4. Design of a vapor-liquid-equilibrium, surface tension, and density apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, C.D.; Outcalt, S.L. [National Institute of Standards and Technology, Boulder, CO (United States)

    1997-12-31

    The design and performance of a unique vapor-liquid equilibrium (VLE) apparatus with density and surface tension capabilities is presented. The apparatus operates at temperatures ranging from 218 to 423 K, at pressures to 17 MPa, at densities to 1100 kg/m{sup 3}, and at surface tensions ranging from 0.1 to 75 mN/m. Temperatures are measured with a precision of {+-}0.02 K, pressures with a precision of {+-}0.1% of full scale, densities with a precision of {+-}0.5 kg/m{sup 3}, surface tensions with a precision of {+-}0.2 mN/m, and compositions with a precision of {+-}0.005 mole fraction. The apparatus is designed to be both accurate and versatile. Capabilities include: (1) the ability to operate the apparatus as a bubble point pressure or an isothermal pressure-volume-temperature (PVT) apparatus, (2) the ability to measure densities and surface tensions of the coexisting phases, and (3) the ability for either trapped or capillary sampling. We can validate our VLE and density data by measuring PVT or bubble point pressures in the apparatus. The use of the apparatus for measurements of VLE, densities, and surface tensions over wide ranges of temperature and pressure is important in equation of state and transport property model development. The use of different sampling procedures allows measurement of a wider variety of fluid mixtures. VLE measurements on the alternative refrigerant system R32/134a are presented and compared to literature results to verify the performance of the apparatus.

  5. Gender, Party, and Presentation of Family in the Social Media Profiles of 10 State Legislatures

    Directory of Open Access Journals (Sweden)

    James M. Cook

    2016-04-01

    Full Text Available Recent research has identified neither consistent gendered stereotypes about legislators among constituents, nor a link between legislators’ gender and their electoral success, nor consistent gender coalitions in legislative voting and co-sponsorship. However, it would be premature to declare that gender is irrelevant to legislative politics. This article considers state legislators’ choice to discuss or omit family in their social media profiles and interprets the choice as a gendered presentation of self. The social media platform Twitter is notable for its status as an especially public stage and for the narrow choice that limited profile space imposes. Different strains in gender theory lead to competing predictions: that women will avoid references to family to avoid making gender salient, that women will highlight references to family to avoid backlash for non-normativity, or that differing gender expectations in different political parties lead to different gender effects. Apart from gender, family references may be more or less available to legislators as a function of their own family status and life stage. Analysis of Twitter profiles of state legislators in 10 US states (N = 911 reveals that party and gender effects interact; controlling for family and life stage circumstances, non-Republican women are moderately more likely to mention family than non-Republican men, but Republican women are much less likely to mention family than Republican men. Gender matters in the social media presentation of legislators’ selves, but in a manner strongly conditioned by party expectations.

  6. The quantum X-ray radiology apparatus

    CERN Document Server

    Hilt, B; Prevot, G

    2000-01-01

    The paper entitled 'New Quantum Detection System for Very Low Dose X-ray Radiology', presented at the talk session, discusses the preliminary data obtained using a new quantum X-ray radiology system with a high-efficiency solid-state detector and highly sensitive electronics, making it possible to reduce significantly the dose administered to a patient in X-ray radiology examinations. The present paper focuses more on the technological aspects of the apparatus, such as the integration of the detector with the two Asics, and the computer system. Namely, it is shown how the computer system calibrates the detection system, acquires the data in real time, and controls the scan parameters and image filtering process.

  7. Tunable metasurfaces and optical Tamm states with liquid crystals (Conference Presentation)

    Science.gov (United States)

    Chen, Kuo-Ping; Lin, Meng-Ying

    2016-09-01

    Planar photonics, like metasurfaces and nanoantennas, got immense attention because of the ability controlling the flow of light. The tunability of metasurfaces system could be realized by combining with liquid crystals. In this work, several novel devices, like tunable nanoantennas array with color, diffraction control of binary gratings metasurfaces, and optical Tamm states would be presented. 1. By comparing different dimensions of nanoantennas, the anchoring energy of liquid crystal could be adjusted in nanoscale. The different shapes of nanoantennas show the difference in color or monotone change when applying different voltages. 2. The diffraction ratio of metasurface could be controlled by nematic liquid crystal by controlling the polarization direction by applying voltages. 3. Optical Tamm states could be realized and adjustable by combining liquid photonic crystal with metasurface. All of those ideas are realized in both modeling and experimental, which could give a great impact to the field of future application in tunable metasurfaces.

  8. Present state and future challenges in pediatric abdominal pain therapeutics research: Looking beyond the forest

    Institute of Scientific and Technical Information of China (English)

    Craig; A; Friesen; Jennifer; V; Schurman; Susan; M; Abdel-Rahman

    2015-01-01

    At the present time, it is nearly impossible to treat pediatric functional gastrointestinal disorders associated with pain in an evidence based fashion. This is due to the overall lack of controlled studies and, even more importantly, the complexity of the contributors to disease phenotype which are not controlled or accounted for in most therapeutic trials. In this manuscript, we review the challenges of defining entry criteria, controlling for the large number of biopsychosocial factors which may effect outcomes, and understanding pharmacokinetic and pharmacodynamic factors when designing therapeutic trials for abdominal pain in children. We also review the current state of pediatric abdominal pain therapeutics and discuss trial design considerations as we move forward.

  9. Specific organization of Golgi apparatus in plant cells.

    Science.gov (United States)

    Vildanova, M S; Wang, W; Smirnova, E A

    2014-09-01

    Microtubules, actin filaments, and Golgi apparatus are connected both directly and indirectly, but it is manifested differently depending on the cell organization and specialization, and these connections are considered in many original studies and reviews. In this review we would like to discuss what underlies differences in the structural organization of the Golgi apparatus in animal and plant cells: specific features of the microtubule cytoskeleton organization, the use of different cytoskeleton components for Golgi apparatus movement and maintenance of its integrity, or specific features of synthetic and secretory processes. We suppose that a dispersed state of the Golgi apparatus in higher plant cells cannot be explained only by specific features of the microtubule system organization and by the absence of centrosome as an active center of their organization because the Golgi apparatus is organized similarly in the cells of other organisms that possess the centrosome and centrosomal microtubules. One of the key factors determining the Golgi apparatus state in plant cells is the functional uniformity or functional specialization of stacks. The functional specialization does not suggest the joining of the stacks to form a ribbon; therefore, the disperse state of the Golgi apparatus needs to be supported, but it also can exist "by default". We believe that the dispersed state of the Golgi apparatus in plants is supported, on one hand, by dynamic connections of the Golgi apparatus stacks with the actin filament system and, on the other hand, with the endoplasmic reticulum exit sites distributed throughout the endoplasmic reticulum.

  10. Mercury's interior structure constrained by geodesy and present-day thermal state

    Science.gov (United States)

    Rivoldini, Attilio; Van Hoolst, Tim; Beuthe, Mikael; Deproost, Marie-Hélène

    2016-10-01

    Recent measurements of Mercury's spin state and gravitational field strongly constrain Mercury's core radius and core density, but provide little information on the size of its inner core. Both a fully molten liquid core and a core differentiated into a large solid inner core and a liquid outer part are consistent with the observations, although the observed tides seem to exclude an extremely large inner core. The observed global magnetic field could be generated even without a growing inner core, since remelting of iron snow inside the core might produce a sufficiently large buoyancy flux to drive magnetic field generation by compositional convection.Further constraints on Mercury's internal structure can be obtained by studying its thermal state. The inner core radius depends mainly on the thermal state and on the light elements present in the core. Secular cooling and subsequent formation of an inner core lead to the global contraction of the planet, estimated to be about 7 km.In this study we combine geodesy data (88 day libration amplitude, polar moment of inertia, and tidal Love number) with the recent estimate of the radial contraction of Mercury and thermal evolution calculations in order to constrain its interior structure and in particular its inner core. We consider bulk compositions that are in agreement with the reducing formation conditions suggested by remote sensing data of Mercury's surface.

  11. NMR logging apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, David O; Turner, Peter

    2014-05-27

    Technologies including NMR logging apparatus and methods are disclosed. Example NMR logging apparatus may include surface instrumentation and one or more downhole probes configured to fit within an earth borehole. The surface instrumentation may comprise a power amplifier, which may be coupled to the downhole probes via one or more transmission lines, and a controller configured to cause the power amplifier to generate a NMR activating pulse or sequence of pulses. Impedance matching means may be configured to match an output impedance of the power amplifier through a transmission line to a load impedance of a downhole probe. Methods may include deploying the various elements of disclosed NMR logging apparatus and using the apparatus to perform NMR measurements.

  12. Thermal Acoustic Fatigue Apparatus

    Data.gov (United States)

    Federal Laboratory Consortium — The Thermal Acoustic Fatigue Apparatus (TAFA) is a progressive wave tube test facility that is used to test structures for dynamic response and sonic fatigue due to...

  13. [The state of the larynx in the patients presenting with chronic obstructive pulmonary disease].

    Science.gov (United States)

    Gilifanov, E A; Nevzorova, V A; Artyushkin, S A; Ivanets, I V

    2016-01-01

    The objective of the present study was to evaluate the clinical state of the larynx and its microbial population in 49 patients examined at the stage of stable condition of chronic obstructive pulmonary disease. Examination of the larynx was carried out with the use of a rigid laryngoscope having a visual angle of 70 degrees, videofibrolaryngoscopy, and stroboscopy using a «TelePac» videocomplex (Karl Storz, Germany). It was supplemented by the study of the bacteriological and mycological paysage. The acoustic analysis of the voice was performed with the help of the Specta PLUS computer program. It was shown that more than 70% of the examined patients presented with various forms of chronic laryngitis. Potentially pathogenic St. pyogenes and yeast-like fungi C. albicans were isolated from 59% and 29% of the patients respectively.

  14. Spin coating apparatus

    Science.gov (United States)

    Torczynski, John R.

    2000-01-01

    A spin coating apparatus requires less cleanroom air flow than prior spin coating apparatus to minimize cleanroom contamination. A shaped exhaust duct from the spin coater maintains process quality while requiring reduced cleanroom air flow. The exhaust duct can decrease in cross section as it extends from the wafer, minimizing eddy formation. The exhaust duct can conform to entrainment streamlines to minimize eddy formation and reduce interprocess contamination at minimal cleanroom air flow rates.

  15. Apparatus for drying sugar cubes

    NARCIS (Netherlands)

    Derckx, H.A.J.; Torringa, H.M.

    1999-01-01

    Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the condit

  16. Generation of quantum entangled states in nonlinear plasmonic structures and metamaterials (Presentation Recording)

    Science.gov (United States)

    Poddubny, Alexander N.; Sukhorukov, Andrey A.

    2015-09-01

    The practical development of quantum plasmonic circuits incorporating non-classical interference [1] and sources of entangled states calls for a versatile quantum theoretical framework which can fully describe the generation and detection of entangled photons and plasmons. However, majority of the presently used theoretical approaches are typically limited to the toy models assuming loss-less and nondispersive elements or including just a few resonant modes. Here, we present a rigorous Green function approach describing entangled photon-plasmon state generation through spontaneous wave mixing in realistic metal-dielectric nanostructures. Our approach is based on the local Huttner-Barnett quantization scheme [2], which enables problem formulation in terms of a Hermitian Hamiltonian where the losses and dispersion are fully encoded in the electromagnetic Green functions. Hence, the problem can be addressed by the standard quantum mechanical perturbation theory, overcoming mathematical difficulties associated with other quantization schemes. We derive explicit expressions with clear physical meaning for the spatially dependent two-photon detection probability, single-photon detection probability and single-photon density matrix. In the limiting case of low-loss nondispersive waveguides our approach reproduces the previous results [3,4]. Importantly, our technique is far more general and can quantitatively describe generation and detection of spatially-entangled photons in arbitrary metal-dielectric structures taking into account actual losses and dispersion. This is essential to perform the design and optimization of plasmonic structures for generation and control of quantum entangled states. [1] J.S. Fakonas, H. Lee, Y.A. Kelaita and H.A. Atwater, Nature Photonics 8, 317(2014) [2] W. Vogel and D.-G. Welsch, Quantum Optics, Wiley (2006). [3] D.A. Antonosyan, A.S. Solntsev and A.A. Sukhorukov, Phys. Rev. A 90 043845 (2014) [4] L.-G. Helt, J.E. Sipe and M.J. Steel, ar

  17. In-situ sputtering apparatus

    Science.gov (United States)

    Erickson, Mark R.; Poole, Henry J.; Custer, III, Arthur W.; Hershcovitch, Ady

    2015-06-09

    A sputtering apparatus that includes at least a target presented as an inner surface of a confinement structure, the inner surface of the confinement structure is preferably an internal wall of a circular tube. A cathode is disposed adjacent the internal wall of the circular tube. The cathode preferably provides a hollow core, within which a magnetron is disposed. Preferably, an actuator is attached to the magnetron, wherein a position of the magnetron within the hollow core is altered upon activation of the actuator. Additionally, a carriage supporting the cathode and communicating with the target is preferably provided, and a cable bundle interacting with the cathode and linked to a cable bundle take up mechanism provided power and coolant to the cathode, magnetron, actuator and an anode of the sputtering apparatus.

  18. APPARATUS FOR CONDENSATION AND SUBLIMATION

    Science.gov (United States)

    Schmidt, R.J.; Fuis, F. Jr.

    1958-10-01

    An apparatus is presented for the sublimation and condensation of uranium compounds in order to obtain an improved crystalline structure of this material. The apparatus comprises a vaporizing chamber and condensing structure connected thereto. There condenser is fitted with a removable liner having a demountable baffle attached to the liner by means of brackets and a removable pin. The baffle is of spiral cross-section and is provided with cooling coils disposed between the surfaces of the baffle for circulation of a temperature controlling liquid within the baffle. The cooling coll provides for controlllng the temperature of the baffle to insure formatlon of a satisfactory condensate, and the removable liner facilitates the removal of condensate formed during tbe sublimation process.

  19. Survey of the present state of the art of piezoelectric linear motors

    Science.gov (United States)

    Hemsel; Wallaschek

    2000-03-01

    Piezoelectric ultrasonic motors have been investigated for several years and have already found their first practical applications. Their key feature is that they are able to produce a high thrust force related to their volume. Beside rotary drives like the travelling wave motor, linear drives have also been developed, but only a few are presently commercially available. In the present paper, we first describe the state of the art of linear piezoelectric motors. The motors are characterized with respect to their no-load velocity, maximum thrust force, efficiency and other technical properties. In the second part, we present a new motor, which is judged to be capable of surpassing the characteristics of other piezoelectric motors because of its unique design which allows the piezoelectric drive elements to be pre-stressed in the direction of their polarization. The piezoelectric elements convert energy using the longitudinal d33 effect which allows an improved reliability, large vibration amplitudes and excellent piezoelectric coupling. Energy loss by vibration damping is minimized, and the efficiency can be improved significantly. Experimental results show that the motor characteristics can be optimized for a particular task by choosing the appropriate operating parameters such as exciting voltage, exciting frequency and normal force.

  20. Impacts from Deployment Barriers on the United States Wind Power Industry: Overview & Preliminary Findings (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.; Tegen, S.; Hand, M.; Heimiller, D.

    2012-09-01

    Regardless of cost and performance some wind projects are unable to proceed to commissioning as a result of deployment barriers. Principal deployment barriers in the industry today include: wildlife, public acceptance, access to transmission, and radar. To date, methods for understanding these non-technical barriers have failed to accurately characterize the costs imposed by deployment barriers and the degree of impact to the industry. Analytical challenges include limited data and modeling capabilities. Changes in policy and regulation, among other factors, also add complexity to analysis of impacts from deployment barriers. This presentation details preliminary results from new NREL analysis focused on quantifying the impact of deployment barriers on the wind resource of the United States, the installed cost of wind projects, and the total electric power system cost of a 20% wind energy future. In terms of impacts to wind project costs and developable land, preliminary findings suggest that deployment barriers are secondary to market drivers such as demand. Nevertheless, impacts to wind project costs are on the order of $100/kW and a substantial share of the potentially developable windy land in the United States is indeed affected by deployment barriers.

  1. [Comorbidities with autism spectrum disorders - present state of research and future outlook].

    Science.gov (United States)

    Sinzig, Judith; Lehmkuhl, Gerd

    2011-03-01

    Numerous somatic and psychopathological disorders occur parallel with autism spectrum disorders. It is presently being discussed whether other co-occurring psychopathological symptoms should constitute a categorical comorbid disorder on their own right and be diagnosed as such; or whether they should be understood as part of the autistic disorder itself. Based on the situation with attention deficit/hyperactivity disorder (ADHD), the current state of research and our own research results are used as examples to demonstrate which prerequisites must be fulfilled for a comorbid disorder. Furthermore, based on neurobiological findings from the areas of molecular biology, neuropsychology, and imaging we show which requirements emerge for the aetiology, early detection, pharmacological and psychotherapeutic treatment, course of illness, and the categorical classification approach.

  2. Present state of radiation processing and its use in the USSR

    Energy Technology Data Exchange (ETDEWEB)

    Fedorov, V.V. (V.G. Khlopin Radium Institute, Leningrad (USSR)); Kon' kov, N.G.

    1984-01-01

    There is growing interest in the processes of radiation technology. This is because of their high economic efficiency when they are integrated in national economy. Also, the recent increase of power and the availability of electrophysical and radionuclide sources of ionizing radiation allow the production on a large scale. In the USSR, radiation processes are utilized widely for the production of materials and workpieces with new useful properties, the increase of agricultural productivity and the improvement of foodstuff preservation, the sterilization of medical materials, and the disinfection of municipal and industrial wastes. The present state of development in radiation processing as above is described on the basis of the proceedings of the all-union conferences in this field held in 1982 and 1983.

  3. HINDI VERSION OF PRESENT STATE EXAMINATION : PROBLEMS OF TRANSLATION AND APPLICATION IN INDIAN SETTING1

    Science.gov (United States)

    Wig, N.N.; Menon, D.K.; Srinivasamurthy, R.

    1982-01-01

    SUMMARY The present State Examination (PSE) schedule is a widely used instrument to record mental status of adult neurotic and functional psychotic patients. It has 140 items based in a semi-structured interview. Each item is rated on ordinal scale. Ratings are based on clinical judgement for which comprehensive glossary is provided. PSE has been used in several international collaborative studies which show that this standardised instrument can be used reliably. The experiences gained in using the Hindi version of the PSE have been highlighted. It has been observed that although there are some limitations, the PSE as a research instrument can be used reliably in the Indian setting. There is a need to gain experience in using the PSE in other Indian languages. PMID:21965931

  4. Present and future nitrogen deposition to national parks in the United States: critical load exceedances

    Directory of Open Access Journals (Sweden)

    R. A. Ellis

    2013-04-01

    Full Text Available National parks in the United States are protected areas wherein the natural habitat is to be conserved for future generations. Deposition of anthropogenic nitrogen (N transported from areas of human activity (fuel combustion, agriculture may affect these natural habitats if it exceeds an ecosystem-dependent critical load (CL. We quantify and interpret the deposition to Class I US national parks for present-day and future (2050 conditions using the GEOS-Chem global chemical transport model with 1/2° × 2/3° horizontal resolution over North America. We estimate CL values in the range 2.5–5 kg N ha−1 yr−1 for the different parks with the goal of protecting the most sensitive ecosystem receptors. For present-day conditions, we find 24 out of 45 parks to be in CL exceedance and 14 more to be marginally so. Many of these are in remote areas of the West. Most (40–85% of the deposition originates from NOx emissions (fuel combustion. We then project future changes in N deposition using the Representative Concentration Pathway (RCP emission scenarios for 2050. These feature 52–73% declines in US NOx emissions relative to present but 19–50% increases in US ammonia (NH3 emissions. Nitrogen deposition at US national parks then becomes dominated by domestic NH3 emissions. While deposition decreases in the East relative to present, there is little progress in the West and increases in some regions. We find that 17–25 US national parks will have CL exceedances in 2050 based on the RCP scenarios. Even in total absence of anthropogenic NOx emissions, 14–18 parks would still have a CL exceedance. Returning all parks to N deposition below CL by 2050 will require at least a 55% decrease in anthropogenic NH3 emissions relative to RCP-projected 2050 levels.

  5. Present and future nitrogen deposition to national parks in the United States: critical load exceedances

    Directory of Open Access Journals (Sweden)

    R. A. Ellis

    2013-09-01

    Full Text Available National parks in the United States are protected areas wherein the natural habitat is to be conserved for future generations. Deposition of anthropogenic nitrogen (N transported from areas of human activity (fuel combustion, agriculture may affect these natural habitats if it exceeds an ecosystem-dependent critical load (CL. We quantify and interpret the deposition to Class I US national parks for present-day and future (2050 conditions using the GEOS-Chem global chemical transport model with 1/2° × 2/3° horizontal resolution over North America. We estimate CL values in the range 2.5–5 kg N ha−1 yr−1 for the different parks to protect the most sensitive ecosystem receptors. For present-day conditions, we find 24 out of 45 parks to be in CL exceedance and 14 more to be marginally so. Many of these are in remote areas of the West. Most (40–85% of the deposition originates from NOx emissions (fuel combustion. We project future changes in N deposition using representative concentration pathway (RCP anthropogenic emission scenarios for 2050. These feature 52–73% declines in US NOx emissions relative to present but 19–50% increases in US ammonia (NH3 emissions. Nitrogen deposition at US national parks then becomes dominated by domestic NH3 emissions. While deposition decreases in the East relative to present, there is little progress in the West and increases in some regions. We find that 17–25 US national parks will have CL exceedances in 2050 based on the RCP8.5 and RCP2.6 scenarios. Even in total absence of anthropogenic NOx emissions, 14–18 parks would still have a CL exceedance. Returning all parks to N deposition below CL by 2050 would require at least a 50% decrease in US anthropogenic NH3 emissions relative to RCP-projected 2050 levels.

  6. Present and future nitrogen deposition to national parks in the United States: critical load exceedances

    Science.gov (United States)

    Ellis, R. A.; Jacob, D. J.; Sulprizio, M. P.; Zhang, L.; Holmes, C. D.; Schichtel, B. A.; Blett, T.; Porter, E.; Pardo, L. H.; Lynch, J. A.

    2013-09-01

    National parks in the United States are protected areas wherein the natural habitat is to be conserved for future generations. Deposition of anthropogenic nitrogen (N) transported from areas of human activity (fuel combustion, agriculture) may affect these natural habitats if it exceeds an ecosystem-dependent critical load (CL). We quantify and interpret the deposition to Class I US national parks for present-day and future (2050) conditions using the GEOS-Chem global chemical transport model with 1/2° × 2/3° horizontal resolution over North America. We estimate CL values in the range 2.5-5 kg N ha-1 yr-1 for the different parks to protect the most sensitive ecosystem receptors. For present-day conditions, we find 24 out of 45 parks to be in CL exceedance and 14 more to be marginally so. Many of these are in remote areas of the West. Most (40-85%) of the deposition originates from NOx emissions (fuel combustion). We project future changes in N deposition using representative concentration pathway (RCP) anthropogenic emission scenarios for 2050. These feature 52-73% declines in US NOx emissions relative to present but 19-50% increases in US ammonia (NH3) emissions. Nitrogen deposition at US national parks then becomes dominated by domestic NH3 emissions. While deposition decreases in the East relative to present, there is little progress in the West and increases in some regions. We find that 17-25 US national parks will have CL exceedances in 2050 based on the RCP8.5 and RCP2.6 scenarios. Even in total absence of anthropogenic NOx emissions, 14-18 parks would still have a CL exceedance. Returning all parks to N deposition below CL by 2050 would require at least a 50% decrease in US anthropogenic NH3 emissions relative to RCP-projected 2050 levels.

  7. Shock state: an unrecognized and underestimated presentation of drug reaction with eosinophilia and systemic symptoms.

    Science.gov (United States)

    Kimmoun, Antoine; Dubois, Elsa; Perez, Pierre; Barbaud, Annick; Levy, Bruno

    2013-11-01

    Some patients with drug reaction with eosinophilia and systemic symptoms (DRESS) are probably admitted in intensive care unit (ICU), but data concerning their clinical features at admission are scarce. Therefore, in the present study, we used a clinical network of French intensivists to study the clinical features and evolution of DRESS patients hospitalized in ICU. A national, retrospective, multicenter study collected DRESS cases hospitalized in ICU for DRESS from 2000 to end of 2011. All files were analyzed through the RegiSCAR scoring system as "no," "possible," "probable," or "definite" DRESS. Patients were included only if they had a probable or definite DRESS. Demographic, hemodynamic, biological, and infectious data were recorded. Twenty-one patients were included. Hospital mortality was 10 (47%) of 21, and 16 of 21 patients had on admission a shock state necessitating vasopressor agents. Echocardiographic ejection fraction in shock patients was depressed (47% ± 13%). Mechanical ventilation was required in 13 of 21 cases. Hepatic failure was observed in 11 of 21 cases, acute renal failure in 18 of 20 cases, and lactic acidosis in 12 of 20 patients. Initial bacteriology was negative in all patients. Human herpesvirus reactivations were found in five of 15 cases. In conclusion, shock without bacteriological documentation associated with multiple organ failure is the most common presentation of DRESS at admission in ICU and is associated with a higher mortality than previously described.

  8. The Black Sea Wave Energy: The Present State and the Twentieth century Changes

    CERN Document Server

    Galabov, Vasko

    2015-01-01

    In this paper we present a study of the present state of the Black Sea wave energy. The studies of other authors are based on the use of input data from atmospheric reanalysis or a downscaling of such reanalysis. Instead of reanalysis data, we use input data from the operational limited area numerical weather prediction model ALADIN. We showed that the estimations of the Black Sea wave energy based on reanalyses deviate significantly from the real potential. We showed also that the highest values of the mean annual wave power flux is between 4.5 and 5.0 kW/m2 and the near shore areas with the highest wave energy potential are the southernmost Bulgarian coast and the coast of Turkey north of Istanbul. While we showed that the wind data from the reanalysis are not useful for the estimation of the actual wave energy potential, we claimed that the reanalysis data is useful to study the long term changes of the wave energy of the Black Sea. We used the 10m winds from the recent ERA-20C reanalysis, which covers the...

  9. Thermal conductivity determinations on solid rock - a comparison between a steady-state divided-bar apparatus and a commercial transient line-source device

    Science.gov (United States)

    Sass, J.H.; Stone, C.; Munroe, R.J.

    1984-01-01

    Two apparatuses were used to measure thermal conductivities on pairs of contiguous samples from 17 specimens of solid rock: the USGS divided-bar apparatus, a steadystate comparative method, and the Shotherm "Quick Thermal Meter" (QTM), which employs a transient strip heat source. Both devices were calibrated relative to fused silica. Both devices have a reproducibility of ??5% or better depending, to some extent, on the physical nature of the specimen being tested. For solid rocks, specimen preparation for the divided bar is much more tedious and expensive than for the QTM, which seems insensitive to minor surface roughness. The QTM does, however, require quite large specimens (30 mm ?? 60 mm ?? 100 mm as a minimum for rocks) with even larger specimens (50 mm ?? 100 mm ?? 100 mm) required for higher conductivity material (3.5 W m-1 K-1 and greater). Experimental times are comparable; however, the QTM is a self-contained unit that can be transported easily and set up quickly and requires no more space than a standard desk top. From a formal statistical comparison, it appears that, over a large range of conductivities (1.4 to ???5 W m-1 K-1) and rock types, the two instruments will yield the same value of thermal conductivity for isotropic rocks. ?? 1984.

  10. In-situ measurement of bound states in the continuum in photonic crystal slabs (Conference Presentation)

    Science.gov (United States)

    Kalchmair, Stefan; Gansch, Roman; Genevet, Patrice; Zederbauer, Tobias; MacFarland, Donald; Detz, Hermann; Andrews, Aaron Maxwell; Schrenk, Werner; Strasser, Gottfried; Capasso, Federico; Loncar, Marko

    2016-04-01

    Photonic crystal slabs have been subject to research for more than a decade, yet the existence of bound states in the radiation continuum (BICs) in photonic crystals has been reported only recently [1]. A BIC is formed when the radiation from all possible channels interferes destructively, causing the overall radiation to vanish. In photonic crystals, BICs are the result of accidental phase matching between incident, reflected and in-plane waves at seemingly random wave vectors [2]. While BICs in photonic crystals have been discussed previously using reflection measurements, we reports for the first time in-situ measurements of the bound states in the continuum in photonic crystal slabs. By embedding a photodetector into a photonic crystal slab we were able to directly observe optical BICs. The photonic crystal slabs are processed from a GaAs/AlGaAs quantum wells heterostructure, providing intersubband absorption in the mid-infrared wavelength range. The generated photocurrent is collected via doped contact layers on top and bottom of the suspended photonic crystal slab. We were mapping out the photonic band structure by rotating the device and by acquiring photocurrent spectra every 5°. Our measured photonic bandstructure revealed several BICs, which was confirmed with a rigorously coupled-wave analysis simulation. Since coupling to external fields is suppressed, the photocurrent measured by the photodetector vanishes at the BIC wave vector. To confirm the relation between the measured photocurrent and the Q-factor we used temporal coupled mode theory, which yielded an inverse proportional relation between the photocurrent and the out-coupling loss from the photonic crystal. Implementing a plane wave expansion simulation allowed us to identify the corresponding photonic crystal modes. The ability to directly measure the field intensity inside the photonic crystal presents an important milestone towards integrated opto-electronic BIC devices. Potential

  11. 49 CFR 234.227 - Train detection apparatus.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION GRADE CROSSING SIGNAL SYSTEM SAFETY AND STATE ACTION PLANS Maintenance, Inspection, and Testing Maintenance Standards § 234.227 Train detection apparatus. (a) Train detection apparatus shall be maintained to detect a train or railcar in any part of a train detection circuit,...

  12. An Apparatus for Growth of Small Crystals From Solutions.

    Science.gov (United States)

    Mitrovic, Mico M.

    1995-01-01

    Describes an apparatus for crystal growth that was designed to study growth kinetics of small crystals from solutions and to obtain crystals of various substances. Describes the use of the apparatus in laboratory practical experiments in the field of crystal growth physics within the course "Solid State Physics". (JRH)

  13. Current measurement apparatus

    Science.gov (United States)

    Umans, Stephen D.

    2008-11-11

    Apparatus and methods are provided for a system for measurement of a current in a conductor such that the conductor current may be momentarily directed to a current measurement element in order to maintain proper current without significantly increasing an amount of power dissipation attributable to the current measurement element or adding resistance to assist in current measurement. The apparatus and methods described herein are useful in superconducting circuits where it is necessary to monitor current carried by the superconducting elements while minimizing the effects of power dissipation attributable to the current measurement element.

  14. Applications of USP apparatus 3 in assessing the in vitro release of solid oral dosage forms

    Directory of Open Access Journals (Sweden)

    Bianca Ramos Pezzini

    2015-06-01

    Full Text Available USP Apparatus 3 (reciprocating cylinder is a very versatile device for the in vitro assessment of release characteristics of solid oral dosage forms, because it enables the product to be subjected to different dissolution media and agitation speeds in a single run. In this paper, a brief history and a description of this system are presented, along with its applications in the development of immediate and modified release products and in the simulation of fasted and fed states using biorelevant media. Furthermore, a comparison is made with the basket and paddle apparatus, especially highlighting the superior hydrodynamics of USP apparatus 3, since the results are not sensitive to factors such as the presence of sample collection probes or air bubbles in the dissolution medium.

  15. The rehabilitation effect of brain ultrasonic wave scanning apparatus and bielectricity feedback on patients with persistent vegetable state after cerebral trauma%脑超声扫描仪及生物电反馈对颅脑损伤后持续性植物状态的康复作用

    Institute of Scientific and Technical Information of China (English)

    兰怡; 田雅萍

    2003-01-01

    @@ BACKGROUND: Persistent vegetable state(PVS) means a special vegetable state. Brain ultrasonic wave scaning apparatus can improve the activity of enzyme, strenthen the permeability of cellular membrane and stimulate peripheral nerve to expand cerebral blood vessels. It also can add brain emtabolism, increase cerebral blood quantity and benefit the building of collateral circulation.

  16. Mobile lighting apparatus

    Science.gov (United States)

    Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

    2013-05-14

    A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

  17. Estado actual de la cirugia general laparoscópica Present state of videolaparascopic surgery

    Directory of Open Access Journals (Sweden)

    Carlos Hernándo Morales Uribe

    1994-04-01

    Full Text Available

    Los procedimientos laparoscópicos han empezado a reemplazar algunas operaciones
    convencionales porque evitan la cirugía mayor y se logra una recuperación precoz del paciente. En el futuro muchas cirugías tradicionales se realizarán laparoscópicamente. En este artículo se presenta el estado actual de la cirugía laparoscópica en los siguientes casos: cirugía biliar, úlcera péptica, corrección del reflujo gastroesofágico
    y de algunos trastornos motores esofágicos, abdomen agudo, herniorrafia inguinal
    y cirugía colorrectal. Se consignan las ventajas y desventajas en general y para cada
    caso en particular.
    Laparascopic pracedures have begun to replace the conventional ones in arder to
    avoid major surgery and to allow an earlier recovery of the patlent. In thls article the
    present state of laparoscopic surgery is revlewed, concernlng the followlng entities:
    blliary surgery, peptlc ulcer, correction of gastroesophageal reflux and of esophageal
    motility problems, acute abdomen, ingulnal herniorrhaphy and colorectal surgery. Advantages and dlsadvantages are consldered both in general and for each speclflc case. 

  18. Pediatric martial arts injuries presenting to Emergency Departments, United States 1990-2003.

    Science.gov (United States)

    Yard, Ellen E; Knox, Christy L; Smith, Gary A; Comstock, R Dawn

    2007-08-01

    Although an estimated 6.5 million United States (US) children aged 6-17 practiced a martial art in 2004, there have been no nationally representative studies comparing pediatric injuries among the three most popular disciplines, karate, taekwondo, and judo. Describe pediatric martial arts injuries presenting to a representative sample of US Emergency Departments (EDs) from 1990 to 2003. We reviewed all martial arts injuries captured by the US Consumer Product Safety Commission's (CPSC), National Electronic Injury Surveillance System (NEISS). An estimated 128,400 children martial arts-related injuries from 1990 to 2003. Injured tended to be male (73.0%) and had a mean age of 12.1 years. Most injuries were attributed to karate (79.5%). The most common mechanism of injury was being kicked (25.6%), followed by falling (20.6%) and kicking (18.0%). The majority of injuries occurred to the lower leg/foot/ankle (30.1%) and hand/wrist (24.5%). The most common injury diagnoses were sprains/strains (29.3%), contusions/abrasions (27.8%), and fractures (24.6%). Participants in judo sustained significantly higher proportions of shoulder/upper arm injuries than karate (IPR=4.31, 95% CI: 2.84-6.55) or taekwondo (IPR=9.75, 95% CI: 3.53-26.91) participants. There were also higher proportions of neck injuries sustained by judo participants compared to karate (IPR=4.73, 95% CI: 1.91-11.70) or taekwondo (IPR=4.17, 95% CI: 1.02-17.06) participants. Pediatric martial arts injuries differ by discipline. Understanding these injury patterns can assist with the development of discipline-specific preventive interventions.

  19. Winifred:An Excessively Rational Woman in the Trap---an Interpretation of the wife in The Door of the Trap from the Perspective of Althusser’s Ideological State Apparatus

    Institute of Scientific and Technical Information of China (English)

    杨晓林

    2015-01-01

    Anderson' s works pose a great challenge to critics due to his revolt against the literary tradition and the difficulty of the classification of his works. His language is tainted with obscurity and vagueness. “The Door of the Trap,” can be ostensibly interpreted as a story of unfulfilled love in an unsatisfactory marriage. Hugh Walker is a math teacher at a small college in Union Valley, Illinois. Married with three children, he often finds himself walking to “cure the restlessness in himself.” One source of his restlessness is his attraction to Mary Cochran. Freed by the death of her father in “Unlighted Lamps,” Mary has gone to college and taken up residence in the Walker house. It is a house of cards ready to collapse. Hugh sees himself as a house whose “shutters are loose.” When he kisses Mary and then asks her to leave the house, she does so “weak with fright” Hugh remains, trapped in what he sees as the prison of his marriage and the reality of his life. The author has noticed that Anderson himself has married three times. And in his letter to Eleanor he has mentioned the importance of a woman in a married life. Given the description of the wife in the door of the trap is not direct and is lacking in length, the author of this paper attempts to interpret the image of the wife by means of Althusser's theory of marriage as an ideological state apparatus. The paper comes to a conclusion: The structure of marriage, with its expectations of obligatory bond between the wife and husband without preconditions, belongs to the apparatus of ideological state control. It is Winifred 'excessive rationality that leads her to regard marriage as a “contract”which is just the functioning principle of marriage ideological state apparatus rather than realize the importance of“intimacy”which Anderson has attached great importance to in married life.

  20. Refrigerant recycling apparatus, method and system

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, J.P.; Gordon, R.F.

    1993-07-13

    A refrigerant recycling apparatus for recovery and purification of refrigerant is described comprising: (a) an input conduit system for connecting a refrigerant source to the refrigerant recycling apparatus; (b) a first disposable filter capable of removing moisture and particulates from the refrigerant, said disposable filter being located such that the filter is easily accessible for service; (c) a primary heat exchanger configured so as to provide heat to the refrigerant thereby causing the refrigerant to be vaporized; (d) a secondary heat exchanger for further heating of the refrigerant to further assist in vaporization of the refrigerant; (e) an expansion valve located prior in line to said primary and secondary heat exchangers for controlling the flow of the refrigerant and reducing the pressure of the refrigerant, thereby allowing the refrigerant to expand to a predominantly gaseous state; (f) a separator for removing oil from the refrigerant; (g) a compressor pump having a vacuum producing inlet and a pressure producing outlet, the pump being a hermetically sealed, lubricated-for-life positive displacement pump; (h) a condenser for cooling the refrigerant; (i) a second disposable filter for removing moisture, acids, and other particulates from the refrigerant passing there through, said disposable filter being located in an area easily accessible for servicing; (j) an interconnecting conduit system for interconnecting the input conduit system, the first and second disposable filters, the heat exchangers, the compressor pump, the condenser, the expansion valve, and the refrigerant source; (k) a moisture indicator located after the second disposable filter, for measuring the degree of moisture present within the refrigerant after the refrigerant has flowed through the second disposable filter.

  1. Archimedes Force on Casimir Apparatus

    CERN Document Server

    Shevchenko, Vladimir

    2016-01-01

    We address a problem of Casimir apparatus in dense medium and weak gravitational field. The falling of the apparatus has to be governed by the equivalence principle, with proper account for contributions to the weight of the apparatus from its material part and from distorted quantum fields. We discuss general expression for the corresponding force in metric with cylindrical symmetry. By way of example we compute explicit expression for Archimedes force, acting on the Casimir apparatus of finite size, immersed into thermal bath of free scalar field. It is shown that besides universal term, proportional to the volume of the apparatus, there are non-universal quantum corrections, depending on the boundary conditions.

  2. The yeast Golgi apparatus.

    Science.gov (United States)

    Suda, Yasuyuki; Nakano, Akihiko

    2012-04-01

    The Golgi apparatus is an organelle that has been extensively studied in the model eukaryote, yeast. Its morphology varies among yeast species; the Golgi exists as a system of dispersed cisternae in the case of the budding yeast Saccharomyces cerevisiae, whereas the Golgi cisternae in Pichia pastoris and Schizosaccharomyces pombe are organized into stacks. In spite of the different organization, the mechanism of trafficking through the Golgi apparatus is believed to be similar, involving cisternal maturation, in which the resident Golgi proteins are transported backwards while secretory cargo proteins can stay in the cisternae. Questions remain regarding the organization of the yeast Golgi, the regulatory mechanisms that underlie cisternal maturation of the Golgi and transport machinery of cargo proteins through this organelle. Studies using different yeast species have provided hints to these mechanisms.

  3. The radon EDM apparatus

    Science.gov (United States)

    Tardiff, E. R.; Rand, E. T.; Ball, G. C.; Chupp, T. E.; Garnsworthy, A. B.; Garrett, P.; Hayden, M. E.; Kierans, C. A.; Lorenzon, W.; Pearson, M. R.; Schaub, C.; Svensson, C. E.

    2014-01-01

    The observation of a permanent electric dipole moment (EDM) at current experimentally accessible levels would provide clear evidence of physics beyond the Standard Model. EDMs violate CP symmetry, making them a possible route to explaining the size of the observed baryon asymmetry in the universe. The Radon EDM Experiment aims to search for an EDM in radon isotopes whose sensitivity to CP-odd interactions is enhanced by octupole-deformed nuclei. A prototype apparatus currently installed in the ISAC hall at TRIUMF includes a gas handling system to move radon from a collection foil to a measurement cell and auxiliary equipment for polarization diagnostics and validation. The features and capabilities of the apparatus are described and an overview of the experimental design for a gamma-ray-anisotropy based EDM measurement is provided.

  4. Improving Students' Data Analysis and Presentation Skills: The Ocean State Circuits, Inc. Forecasting Project

    Science.gov (United States)

    Kroes, James R.; Chen, Yuwen; Mangiameli, Paul

    2013-01-01

    Many potential employers expect that newly hired students will arrive on-the-job with the ability to analyze data, utilize spreadsheets, and communicate findings and recommendations. We designed the Ocean State Circuits, Inc. Forecasting Project to address these gaps in our students' knowledge of analytical tools (such as the "vlookup()"…

  5. The Present State of the Business Law Education of Accounting Students: The Business Law Professor's Perspective

    Science.gov (United States)

    Kocakulah, Mehmet C.; Austill, A. David; Long, Brett

    2009-01-01

    The article aims to provide Certified Public Accountant (CPA) candidates, accounting faculty, the American Institute of Certified Public Accountants (AICPA), and the state boards of accountancy with an insight into the business law professor's perspective concerning the legal education of accountants. This article first describes various factors,…

  6. Florida State University Work Plan Presentation for 2012-13 Board of Governors Review

    Science.gov (United States)

    Board of Governors, State University System of Florida, 2012

    2012-01-01

    The State University System of Florida has developed three tools that aid in guiding the System's future: (1) The Board of Governors' new "Strategic Plan 2012-2025" is driven by goals and associated metrics that stake out where the System is headed; (2) The Board's "Annual Accountability Report" provides yearly tracking for how…

  7. Florida State University Work Plan Presentation for 2013-14 Board of Governors Review

    Science.gov (United States)

    Board of Governors, State University System of Florida, 2013

    2013-01-01

    The State University System of Florida has developed three tools that aid in guiding the System's future: (1) The Board of Governors' new "Strategic Plan 2012-2025" is driven by goals and associated metrics that stake out where the System is headed; (2) The Board's "Annual Accountability Report" provides yearly tracking for how…

  8. Florida State University Work Plan Presentation for 2014-15 Board of Governors Review

    Science.gov (United States)

    Board of Governors, State University System of Florida, 2014

    2014-01-01

    The State University System of Florida has developed three tools that aid in guiding the System's future: (1) The Board of Governors' new "Strategic Plan 2012-2025" is driven by goals and associated metrics that stake out where the System is headed; (2) The Board's "Annual Accountability Report" provides yearly tracking for how…

  9. Pyrolysis process and apparatus

    Science.gov (United States)

    Lee, Chang-Kuei

    1983-01-01

    This invention discloses a process and apparatus for pyrolyzing particulate coal by heating with a particulate solid heating media in a transport reactor. The invention tends to dampen fluctuations in the flow of heating media upstream of the pyrolysis zone, and by so doing forms a substantially continuous and substantially uniform annular column of heating media flowing downwardly along the inside diameter of the reactor. The invention is particularly useful for bituminous or agglomerative type coals.

  10. Heat exchange apparatus

    Science.gov (United States)

    Degtiarenko, Pavel V.

    2003-08-12

    A heat exchange apparatus comprising a coolant conduit or heat sink having attached to its surface a first radial array of spaced-apart parallel plate fins or needles and a second radial array of spaced-apart parallel plate fins or needles thermally coupled to a body to be cooled and meshed with, but not contacting the first radial array of spaced-apart parallel plate fins or needles.

  11. Historical Sediment Budget (1860s to Present) for the United States Shoreline of Lake Erie

    Science.gov (United States)

    2016-08-01

    construction • trapping sediment at harbor fillets • depositing material dredged from river mouths into deep water or onto land. Figure 3. Sediment...from the following web pages: • Chautauqua County: http://www.nysgis.state.ny.us/gateway/mg/2008/chautauqua/ • Erie County: http...Service, Coastal Services Center (CSC), distributes these data via an interactive web page. In terrain where tree cover obscured the bluff edge in

  12. The EU Arms Embargo on China, from 2001 to the Present: Implications for the United States

    Science.gov (United States)

    2008-06-01

    Chinese Foreign Minister Li Zhaoxing at the Fifth ASEM Foreign Ministers’ Meeting, speech by the Minister, Bali , July 24, 2003, http://www.fmprc.gov.cn...often stated by Deng Xiaoping, the principal goal of the CCP in ensuring the survival of its brand of socialism has been to maintain legitimacy through...Another Maoist legacy is that the Soviet brand of industrialization did not utilize China’s natural endowment in human capital and further relied heavily

  13. 1944 Water Treaty Between Mexico and the United States: Present Situation and Future Potential

    Directory of Open Access Journals (Sweden)

    Anabel Sánchez

    2006-01-01

    Full Text Available Historically and culturally, water has always been considered to be a critical issue in Mexico- USA agenda. Along the 3 140-km border between Mexico and the United States, there is intense competition over the adequate availability of water. Water uses in urban border areas have continued to increase exponentially due to steadily increasing levels of population growth. Rapid industrialisation and urbanisation have resulted in more intensive patterns of water consumption and use. Agricultural water demands continue to be high. Mexico and the United States have established institutions and agreements to manage and protect rivers in the border region. The Treaty between Mexico and the United States for the Utilisation of Waters of the Colorado and Tijuana Rivers and of the Rio Grande was signed in 1944. With the turn of the century, the growing urban centers along the Rio Grande (Rio Bravo, where the river becomes the international boundary, started increasingly to depend on groundwater. This situation was not specifically addressed in the 1944 Treaty, especially as groundwater use at that time was not so significant.

  14. A chronic hypercoagulable state in patients with beta-thalassaemia major is already present in childhood.

    Science.gov (United States)

    Eldor, A; Durst, R; Hy-Am, E; Goldfarb, A; Gillis, S; Rachmilewitz, E A; Abramov, A; MacLouf, J; Godefray, Y C; De Raucourt, E; Guillin, M C

    1999-12-01

    A higher than normal incidence of thromboembolic events has been observed in adult patients with beta-thalassaemia major (TM) and certain haemostatic anomalies found in these patients suggest the existence of a chronic hypercoagulable state. Thalassaemic red blood cells (RBC) were demonstrated to facilitate thrombin formation due to altered asymmetry of the membrane phospholipids with enhanced exposure of phosphatidylserine. Since RBC anomalies exist in thalassaemia from the first months of life, we studied markers of hypercoagulability and thrombophilia in 36 adult patients (range 19-38 years) and 26 children (range 2-18 years) with beta-TM. All the patients were in steady state and none had experienced clinical signs or symptoms of thrombosis. Highly elevated urinary levels of 11-dehydro-thromboxane B2 and significantly elevated plasma levels of thrombin-antithrombin III (TAT) complexes were observed to the same extent in TM children and adults. The levels of factor II were decreased while factors V, VII + X and plasminogen were within the normal range. The natural coagulation inhibitors, protein C (PC) and protein S (PS) were significantly decreased in all TM patients investigated, regardless of age, but the PS binding protein (C4bBP) and antithrombin III levels were normal. The frequency of other thrombophilic mutations was not increased. Thus, a chronic hypercoagulable state already exists in thalassaemia in childhood and may contribute to the cardiac and pulmonary anomalies and the thrombotic events which occur later.

  15. Role of band states and trap states in the charge transport properties of organic semiconductors (Conference Presentation)

    Science.gov (United States)

    Coropceanu, Veaceslav

    2016-11-01

    In this contribution, we examine the main factors that define charge transport in organic semiconductors. We consider both crystals based on a single molecule building block, such as oligoacenes, and two-component donor-acceptor crystals in which one component acts as an electron donor and the other as an acceptor. We will first discuss the state-of-the-art methodologies used in the derivation of the microscopic parameters (electron-vibration couplings, transfer integrals, band gaps, bandwidths, and effective masses) describing charge transport. In particular, we will discuss the impact that the amount of nonlocal Hartree-Fock exchange included in a hybrid density functional has on these parameters. In order to understand the role of disorder we use a combination of electronic-structure calculations and molecular mechanics/molecular dynamics simulations complemented by ensemble and time average approaches to separate the static and dynamic disorder components. The temperature dependence of the charge carrier mobility is studied by treating the electron-phonon interaction as a perturbation (Boltzmann theory), in the static approximation (Kubo formalism) and in the framework of mixed quantum/classical dynamics. Finally, based on the results of the kinetic Monte Carlo simulations we will compare the merits of a hopping model and a mobility edge model in the description of the effect of charge-carrier concentration on the electrical conductivity, carrier mobility, and Fermi energy of organic semiconductors.

  16. Phthalate Esters and Reproductive Toxicity** Presentation requested by State of Mass Use Reductions Committee-TURI

    Science.gov (United States)

    Phthalate esters and reproductive toxicity the presentation described the uses of phthalates, the toxicity to mammals with a focus on reproductive toxicity and the potency of these chemicals to disrupt mammalian reproductive development in utero

  17. State Antifeminism

    Directory of Open Access Journals (Sweden)

    Francis Dupuis-Déri

    2016-06-01

    Full Text Available ‘State feminism’ is a concept that refers to the integration of feminists and feminist issues into the state apparatus. Yet, while the feminist movement must regularly contend with an antifeminist counter-movement, it is worth considering whether a ‘state antifeminism’ is also present or emerging, and how this presence or emergence is affecting efforts by feminist organizations to address the needs of women and advance women's equality. With this objective in mind, this article focuses chiefly on two Western countries and is based on more than twenty semi-structured interviews with feminists in Belgium and Quebec, Canada.

  18. Optical control of exciton states and enhanced valley Zeeman splitting in WS2(Conference Presentation)

    Science.gov (United States)

    Kioseoglou, George; Currie, Marc; Hanbicki, Aubrey T.; Paradisanos, Ioannis; Stratakis, Emmanuel; Fotakis, Costas; Jonker, Berrend T.

    2016-10-01

    Monolayer transition metal dichalcogenides, MX2 (M = Mo, W and X = S, Se), are direct-gap semiconductors with many interesting properties capable of producing an all-surface material applicable to sensing, single-atom storage and other quantum-based technologies. Here we report on the optical control of single layers of MX2 such that the photoluminescence (PL) is solely from the trion state. After trion isolation, changes in the Raman spectra were observed: there is a decrease in the intensity of the out of plane mode and an enhancement of the 2LA mode. The effect is reversible, and our results suggest that the changes of the strength of a particular excitonic state are due to surface interactions with ambient environment. In addition, spatial non-uniformity is probed by studying variations of strain and the PL emission as a function of position on our sample. The boundaries of mechanically exfoliated MX2 as well as boundaries intentionally created via fs laser ablation were investigated. The edges exhibit significant Raman shifts as well as remarkably enhanced PL emission compared to their respective central area. Finally, we probe the degree of circular polarization of the emitted PL as a function of the photo-excitation energy and temperature to elucidate spin-dependent inter- and intra-valley relaxation mechanisms. This work was supported by the FP7-REGPOT-2012-2013-1, under grant agreement 316165.

  19. A long-lived and solid-state quantum memory for photons (Conference Presentation)

    Science.gov (United States)

    Afzelius, Mikael

    2016-04-01

    A major challenge in quantum technologies is to build an efficient and long-lived quantum memory, particularly using solid-state devices. I will here report on an experiment where we combine the AFC optical memory with spin-echo techniques to extend the memory time from a few microseconds to about 1 ms, using an Europium-doped crystal. In general the spin-echo technique allows one to control the inhomogeneous spin dephasing which often sets the storage-time limit both in solid-state systems and laser-cooled gases. However, theoretically it is has been argued that spin-echo techniques would be extremely difficult to apply without creating noise in the case of a single quanta stored in a large spin ensemble. We here show how this noise can be limited and demonstrate high signal-to-noise ratio in the output mode when storing pulses at the single-photon level. Furthermore we stored polarization qubits encoded onto weak coherent , with fidelities surpassing a classical storage scheme.

  20. Charge transfer and triplet states in OPV materials and devices (Presentation Recording)

    Science.gov (United States)

    Dyakonov, Vladimir

    2015-10-01

    Electron back transfer (EBT), potentially occurring after electron transfer from donor to acceptor may populate the lower lying donor or acceptor triplet state and serve as recombination channel.[1] Here we report on studies of charge transfer and triplet states in blends of highly efficient benzodithiophene PTB7 polymer in combination with the fullerene-derivative PC71BM using the spin sensitive optically detected magnetic resonance (ODMR) technique and compare the results with those obtained in P3HT (poly(3- hexylthiophene):PC61BM blends. Although PTB7:PC71BM absorbers yield much higher power conversion efficiencies in solar cells exceeding 7%, we found a significant increase of triplet exciton generation, which was absent in the P3HT based blends. We discuss this observation within the EBT scenario with the emphasis on the influence of morphology, fullerene load, HOMO/LUMO energy and presence of additives (DIO). Suppressing the EBT process by morphology and/or energetics of polymer and molecules is important to achieve the full potential of highly efficient OPV materials. [1] M. Liedtke, et al., JACS 133, 9088 (2011).

  1. PRESENT STATE AND PROBLEMS OF PHYSICAL TRAINING OF PERSONNEL OF POLICE

    Directory of Open Access Journals (Sweden)

    A. V. Dadov

    2016-01-01

    Full Text Available The main factor in the criminal world of confrontation in the Russian Federation are the law enforcement agencies, in particular the Ministry of Interior system in the face of internal affairs bodies. One of the main components of a successful career law enforcement officer is a high level of physical fitness. This fact is due to the necessity of being in a constant state of alert to repel attacks from the underworld. Employees are required to promptly respond to emergencies in the performance, using not only the latest weapons, but also the methods and means of specialized training. The problem of content, focus and methods of physical training of law enforcement officers is widely regarded in the scientific and technical literature. This range of issues is reflected in the legal documents, which indicates the importance and urgency of physical training officer for the state as a whole. The role of law enforcement in the maintenance of law and order, ensuring public safety - high. From an effective and well-coordinated work of lawenforcement bodies, the interaction of these structures with the social forces, local authorities and citizens, depends largely on a quiet and measured life not only society but also the individual citizen.

  2. Computer-generated slides: outdated technology or state-of-the-art presentation style?

    Science.gov (United States)

    Hinds, K F

    1998-01-01

    With the explosion of computerization, it appears that the business community is switching to computer-based presentations, projecting onto a screen directly from a computer, instead of the old standard of presenting with slides. However, the dental profession has been slow to follow. Although some speakers have switched to computer-based presentations, slides are still the standard in 1998. With the advent of numerous new computer software programs, clinicians are now able to generate highly sophisticated slides, that can be an equally powerful medium to communicate with the audience. Unfortunately, many clinicians are not taking advantage of the benefits of this technology. This article explains the simplicity of generating professional, high quality slides, reviews the major programs and equipment available to accomplish this task, and previews the multitude of applications this technology offers to practitioners as well as educators.

  3. Apparatus and Techniques for Time-resolved Synchrotron X-ray Diffraction using Diamond Anvil Cells

    Science.gov (United States)

    Smith, J.; Sinogeikin, S. V.; Lin, C.; Rod, E.; Bai, L.; Shen, G.

    2015-12-01

    Complementary advances in synchrotron sources, x-ray optics, area detectors, and sample environment control have recently made possible many time-resolved experimental techniques for studying materials at extreme pressure and temperature conditions. The High Pressure Collaborative Access Team (HPCAT) at the Advanced Photon Source has made a sustained effort to assemble a powerful collection of high-pressure apparatus for time-resolved research, and considerable time has been invested in developing techniques for collecting high-quality time-resolved x-ray scattering data. Herein we present key aspects of the synchrotron beamline and ancillary equipment, including source considerations, rapid (de)compression apparatus, high frequency imaging detectors, and software suitable for processing large volumes of data. A number of examples are presented, including fast equation of state measurements, compression rate dependent synthesis of metastable states in silicon and germanium, and ultrahigh compression rates using a piezoelectric driven diamond anvil cell.

  4. Analysis of the astronomical concepts presented by teachers of some state schools

    Science.gov (United States)

    Gonzaga, E. P.; Voelzke, M. R.

    2011-06-01

    Many Basic Education's teachers (EB) don't deal concepts related to astronomy and when they do so, they just follow didactic books which contain many conceptual errors. Astronomy is one of the contents taught in the EB and is part of the curriculum proposed by the Education Department of the State of São Paulo. With the intention to minimise some deficiencies, a University Extension Course for teachers of the Diretoria de Ensino Regional (Mauá, Ribeirão Pires and Rio Grande da Serra) was conducted with the following objectives: to raise alternative conceptions, to subsidise teachers by means of lectures, discussions and workshops, and to check the learning after the course. Therefore, sixteen questions were applied before and after the course. The results were quite satisfactory.

  5. Distance Learning and Skill Acquisition in Engineering Sciences: Present State and Prospects

    Science.gov (United States)

    Potkonjak, Veljko; Jovanovic, Kosta; Holland, Owen; Uhomoibhi, James

    2013-01-01

    Purpose: The purpose of this paper is to present an improved concept of software-based laboratory exercises, namely a Virtual Laboratory for Engineering Sciences (VLES). Design/methodology/approach: The implementation of distance learning and e-learning in engineering sciences (such as Mechanical and Electrical Engineering) is still far behind…

  6. The Place of Entrepreneurship in Higher Education – Present State and Perspectives

    Directory of Open Access Journals (Sweden)

    Iga Kott

    2015-05-01

    Full Text Available Entrepreneurship is one of the main driving forces of the national economies. In Poland, more and more jobs are created in private enterprises, set up and running by entrepreneurs. Entrepreneurs are characterized as people, which seize the opportunity to act, have higher self-esteem and a greater sense of control over their lives, and they, usually become successful people. This causes a widespread conviction, that the promotion of entrepreneurship, may result in maximizing the success of both, individual and in the scale of the national economy as well. Therefore, it becomes important to develop standards in the field of entrepreneurship education, the greater numbers of people would have been able to achieve a professional success. This article presents the essence of the entrepreneurship and the role of education, in entrepreneurship’s excitation or strengthening. Also a practical example of the implementation of these provisions by one of the Polish Universities - Czestochowa University of Technology, is presented.

  7. Present and Last Glacial Maximum climates as states of maximum entropy production

    CERN Document Server

    Herbert, Corentin; Kageyama, Masa; Dubrulle, Berengere

    2011-01-01

    The Earth, like other planets with a relatively thick atmosphere, is not locally in radiative equilibrium and the transport of energy by the geophysical fluids (atmosphere and ocean) plays a fundamental role in determining its climate. Using simple energy-balance models, it was suggested a few decades ago that the meridional energy fluxes might follow a thermodynamic Maximum Entropy Production (MEP) principle. In the present study, we assess the MEP hypothesis in the framework of a minimal climate model based solely on a robust radiative scheme and the MEP principle, with no extra assumptions. Specifically, we show that by choosing an adequate radiative exchange formulation, the Net Exchange Formulation, a rigorous derivation of all the physical parameters can be performed. The MEP principle is also extended to surface energy fluxes, in addition to meridional energy fluxes. The climate model presented here is extremely fast, needs very little empirical data and does not rely on ad hoc parameterizations. We in...

  8. March to Armageddon: The United States and the nuclear arms race, 1939 to the present

    Energy Technology Data Exchange (ETDEWEB)

    Powaski, R.

    1987-01-01

    This history of the events, forces, and factors that have brought the world to the brink of nuclear holocaust probes two basic questions: what factors perpetuate the nuclear arms race and why is it so difficult to end. Starting with the opening days of World War II, this study traces the escalating arms race up to the present and notes that, while nuclear arsenals continue to grow, nuclear arms treaties are on the verge of collapse.

  9. Comments on the present state of second-order closure models for incompressible flows

    Science.gov (United States)

    Speziale, Charles G.

    1992-01-01

    Second-order closure models account for history and nonlocal effects of the mean velocity gradients on the Reynolds stress tensor. Turbulent flows involving body forces or curvature, Reynolds stress relaxational effects, and counter-gradient transport are usually better described. The topics are presented in viewgraph form and include: (1) the Reynolds stress transport equation; (2) issues in second-order closure modeling; and (3) near wall models.

  10. Hashimoto’s encephalopathy presenting with acute confusional state in a patient with hypothyroidism

    OpenAIRE

    Naglaa Fathy Barseem; Mohamed Ahmed Helwa

    2015-01-01

    Hashimoto’s encephalopathy is a neurological disorder of unknown etiology associated with thyroid autoimmunity. The disease may present as two types, a sudden vasculitic type or a progressive subacute type associated with cognitive dysfunction, confusion and memory loss. We report a case of a 6 year old previously healthy Egyptian female , who developed a subacute onset of declining upper brain function. Serologic studies demonstrated high levels of antithyroid antibodies. Electroencephalo...

  11. Carbonate mineral saturation states in the East China Sea: present conditions and future scenarios

    Directory of Open Access Journals (Sweden)

    W.-C. Chou

    2013-10-01

    Full Text Available To assess the impact of rising atmospheric CO2 and eutrophication on the carbonate chemistry of the East China Sea shelf waters, saturation states (Ω for two important biologically relevant carbonate minerals – calcite (Ωc and aragonite (Ωa – were calculated throughout the water column from dissolved inorganic carbon (DIC and total alkalinity (TA data collected in spring and summer of 2009. Results show that the highest Ωc (∼9.0 and Ωa (∼5.8 values were found in surface water of the Changjiang plume area in summer, whereas the lowest values (Ωc = ∼2.7 and Ωa = ∼1.7 were concurrently observed in the bottom water of the same area. This divergent behavior of saturation states in surface and bottom waters was driven by intensive biological production and strong stratification of the water column. The high rate of phytoplankton production, stimulated by the enormous nutrient discharge from the Changjiang, acts to decrease the ratio of DIC to TA, and thereby increases Ω values. In contrast, remineralization of organic matter in the bottom water acts to increase the DIC to TA ratio, and thus decreases Ω values. The projected result shows that continued increases of atmospheric CO2 under the IS92a emission scenario will decrease Ω values by 40–50% by the end of this century, but both the surface and bottom waters will remain supersaturated with respect to calcite and aragonite. Nevertheless, superimposed on such Ω decrease is the increasing eutrophication, which would mitigate or enhance the Ω decline caused by anthropogenic CO2 uptake in surface and bottom waters, respectively. Our simulation reveals that, under the combined impact of eutrophication and augmentation of atmospheric CO2, the bottom water of the Changjiang plume area will become undersaturated with respect to aragonite (Ωa = ∼0.8 by the end of this century, which would threaten the health of the benthic ecosystem.

  12. Taeniasis and cysticercosis in Asia and the Pacific: present state of knowledge and perspectives.

    Science.gov (United States)

    Ito, Akira; Nakao, Minoru; Wandra, Toni; Suroso, Thomas; Okamoto, Munehiro; Yamasaki, Hiroshi; Sako, Yasuhito; Nakaya, Kazuhiro

    2005-01-01

    Several topics on taeniasis and cysticercosis in Asia and the Pacific are overviewed. In Asia and the Pacific, three human taeniid species have been recognized: Taenia solium, Taenia saginata and Taenia asiatica. The first topic is on evolution of T. solium. Mitochondrial DNA polymorphisms of T. solium worldwide are discussed with emphasis of two specific genotypes: American-African and Asian. The second topic is recent major advances in sero- and molecular-diagnosis of T. solium cysticercosis in humans, pigs and dogs. The third is the present situation of T. solium taeniasis/cysticercosis in Papua (Irian Jaya), Indonesia. The forth is the present situation of T. solium cysticercosis and T. saginata taeniasis in Bali, Indonesia. The fifth is the present situation of T. asiatica taeniasis in Asia and the Pacific and in North Sumatra, Indonesia. The sixth is on the debate of the exact definition of T. asiatica. Because T. asiatica can not be differentiated from T. saginata morphologically, it is time to re-evaluate T. saginata in Asia and the Pacific. New and broad-based surveys across this region are necessary from epidemiological and public health perspectives, based on evidence.

  13. Developments in the delivery of emergency care in Japan and the present state of our hospital's emergency care.

    Science.gov (United States)

    Tonouchi, S

    1993-07-01

    Japan is far behind Western nations in emergency care, such as the United States where paramedics are placed under the M-ICU system and France in which the SAMU system is in force. This paper is an attempt to introduce developments in the delivery of emergency care in the Japanese rural setting and the present state of emergency care delivered at our hospitals, while checking them against national policy.

  14. LIBERALISATION OF THE ELECTRICITY SECTOR IN THE EUROPEAN UNION: PRESENT STATE AND SOME OPEN QUESTIONS

    Energy Technology Data Exchange (ETDEWEB)

    Nunez, A.

    2007-07-01

    The liberalisation of the electricity sector started approximately 10 to 15 years ago, depending on the country. Nonetheless, there is still no general agreement on the liberalisation model this sector should follow, mainly because of the discussion of whether the liberalisation is an end in itself, or a means for -basically- lower energy prices. The complexity of the sector and the resilience of the incumbents' market power have currently placed the liberalisation process at a crossroad. In the EU, entrenched national interests are another obstacle to deal with. In this article, we first give an overview of the different liberalisation processes in the electricity sector and then summarize the pending challenges from an EU perspective. Next, we argue that the EU should focus on conditions aiming at implementing an effective liberalisation process, rather than on a formal liberalisation approach. We show how asymmetries between non-sector regulations in the European states and among companies create an uneven playing field, contrary to the European vision of an internal competitive energy market. We end the article studying the compatibility of the current European regulatory framework with the upcoming challenges in the energy sector. (auth)

  15. Estimate of the Geothermal Energy Resource in the Major Sedimentary Basins in the United States (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Esposito, A.; Porro, C.; Augustine, C.; Roberts, B.

    2012-09-01

    Because most sedimentary basins have been explored for oil and gas, well logs, temperatures at depth, and reservoir properties such as depth to basement and formation thickness are well known. The availability of this data reduces exploration risk and allows development of geologic exploration models for each basin. This study estimates the magnitude of recoverable geothermal energy from 15 major known U.S. sedimentary basins and ranks these basins relative to their potential. The total available thermal resource for each basin was estimated using the volumetric heat-in-place method originally proposed by (Muffler, 1979). A qualitative recovery factor was determined for each basin based on data on flow volume, hydrothermal recharge, and vertical and horizontal permeability. Total sedimentary thickness maps, stratigraphic columns, cross sections, and temperature gradient information was gathered for each basin from published articles, USGS reports, and state geological survey reports. When published data were insufficient, thermal gradients and reservoir properties were derived from oil and gas well logs obtained on oil and gas commission databases. Basin stratigraphy, structural history, and groundwater circulation patterns were studied in order to develop a model that estimates resource size, temperature distribution, and a probable quantitative recovery factor.

  16. A Langmuir Blodgett film presenting a ferromagnetic state below 25 K

    Science.gov (United States)

    Lafuente, C.; Mingotaud, C.; Delhaes, P.

    1999-03-01

    A positively charged monolayer spread on a sub-phase containing copper hexacyanoferrate leads to hybrid inorganic-organic LB films. Those multilayers present a spin ordering below 25 K. The Curie temperature of the LB films is found to be independent of the multilayer thickness. Their magnetization is clearly proportional to the number of transferred layers, demonstrating that the deposition process is perfectly regular. These results show that a bulk ferromagnetic behavior can be observed in this hybrid material, even if the distance between magnetic layers is considered as large.

  17. Shallow moonquakes - Depth, distribution and implications as to the present state of the lunar interior

    Science.gov (United States)

    Nakamura, Y.; Latham, G. V.; Dorman, H. J.; Ibrahim, A.-B. K.; Koyama, J.; Horvath, P.

    1979-01-01

    The observed seismic amplitudes of HFT (high-frequency teleseismic) events do not vary with distance as expected for surface sources, but are consistent with sources in the upper mantle of the moon. Thus, the upper mantle of the moon is the only zone where tectonic stresses deriving from differential thermal contraction and expansion of the lunar interior are presently high enough to cause moonquakes. The distribution of shallow moonquake epicenters suggests a possible correlation with impact basins, implying a lasting tectonic influence of impact basins long after their formation. The finite depths now assigned to these shallow moonquakes necessitate further revision to the seismic structural model of the lunar interior.

  18. Present State and Future Developments in Mechatronics and it's Influence on Fluid Power Systems

    DEFF Research Database (Denmark)

    Christensen, Georg Kronborg; Zhou, Jianjun; Conrad, Finn

    1998-01-01

    with electronics, software and mechanics. This synergetic integration is often called Mechatronics.The topic which is rather widespread will be treated in three sections: I) General overview of mechatronics and fluid power. In this section the general trends of mechatronics in fluid power is considered by relating...... trends in the neighbouring fields of software and electronic hardware to fluid power developments. II) Mechatronic case stories from IKS In this section the results of a conceptual design study : "Design of a frequency converter based hydraulic power supply" is presented together with a more detailed...

  19. Analysis of the astronomical concepts presented by teachers of some Brazilian state schools

    Science.gov (United States)

    Voelzke, Marcos Rincon; Pereira Gonzaga, Edwon

    2013-01-01

    The reason for the development of this work is based on the fact that many teachers of the basic education level (EL) don't deal with concepts related to astronomy, but when they do so they just follow didactic books, which contain many conceptual errors. Astronomy is one of the subjects being taught in the EL and it is part of the proposals of the Education Ministry and the Education Department of the State of São Paulo; but it is a fact that several researchers point out many mistakes in teaching Astronomy. Their purpose is to minimize some deficiencies, and this aim was worked out in an Academical Extension Course for Teachers from the Directorate of Regional (DR) Teaching (Mauá, Ribeirão Pires and Rio Grande da Serra) with the following objectives: to raise alternative conceptions; to provide supplemental instruction of teachers by means of lectures, discussions and workshops, and to check the learning success after the course. Therefore, sixteen questions were applied before and after the course, so that quite satisfactory results could be established afterwards: 100.0% of the teachers knew the names of the phases of the moon, 97.0% understood that the Solar System is composed by eight planets, 78.1% were able to explain how a "Lunar Eclipse" occurs, a "Solar Eclipse" and a "Solstice", 72.7% knew how to explain the occurrence of the seasons of the year; 64.5% explained the occurrence of the equinox correctly, 89.7% were able to define properly the term "comet"; 63.6% defined "Asteroid", 54.5% "meteor"; 58.1% "galaxy", and 42.4% "planet".

  20. [Department of Physiology of Industrial Microorganisms: the history and present state].

    Science.gov (United States)

    Pidhors'kyĭ, V S

    2008-01-01

    The paper is devoted to investigations carried out in the recent years at the Department of Physiology of industrial Microorganisms. The basic trends and results of investigation are presented concerning the systematic position and biological activity of industrially important strains of lactic acid and bifido-bacteria, search and selection of yeast--producers of biologically active substances, effect of ionizing electromagnetic radiation of radio-frequency range on yeast viability, their sorptional activity. Surface biopolymers ofcorinebacteria cells, their ability to destruct mineral motor oils have been studied; preparations based on actinobacteria for bioremediation of oil pollutions have been developed; interaction of microorganisms with inorganic xenobiotics--oxygen-containing anions and heavy metals have been investigated. The author also presents data on the study of action mechanism of extracellular sialospecific lectins of saprophytic bacilli, their antiviral activity on the models of influenza, herpes, hepatitis C, and HIV-infection, as well the processes of shaping regulation in a number of micromycetes. Data are available concerning the maintenance of the collection cultures of yeast, lactic acid and corinebacteria, microorganisms which have been preserved in the depositary.

  1. Effects of hippocampal state-contingent trial presentation on hippocampus-dependent nonspatial classical conditioning and extinction.

    Science.gov (United States)

    Nokia, Miriam S; Wikgren, Jan

    2014-04-23

    Hippocampal local field potentials are characterized by two mutually exclusive states: one characterized by regular θ oscillations (∼4-8 Hz) and the other by irregular sharp-wave ripples. Presenting stimuli during dominant θ oscillations leads to expedited learning, suggesting that θ indexes a state in which encoding is most effective. However, ripple-contingent training also expedites learning, suggesting that any discrete brain state, much like the external context, can affect learning. We trained adult rabbits in trace eyeblink conditioning, a hippocampus-dependent nonspatial task, followed by extinction. Trials were delivered either in the presence or absence of θ or regardless of hippocampal state. Conditioning in the absence of θ led to more animals learning, although learning was slower compared with a yoked control group. Contrary to expectations, conditioning in the presence of θ did not affect learning. However, extinction was expedited both when it was conducted contingent on θ and when it was conducted in a state contrary to that used to trigger trials during conditioning. Strong phase-locking of hippocampal θ-band responses to the conditioned stimulus early on during conditioning predicted good learning. No such connection was observed during extinction. Our results suggest that any consistent hippocampal oscillatory state can potentially be used to regulate learning. However, the effects depend on the specific state and task at hand. Finally, much like the external environment, the ongoing neural state appears to act as a context for learning and memory retrieval.

  2. Fluidized bed calciner apparatus

    Science.gov (United States)

    Owen, Thomas J.; Klem, Jr., Michael J.; Cash, Robert J.

    1988-01-01

    An apparatus for remotely calcining a slurry or solution feed stream of toxic or hazardous material, such as ammonium diurante slurry or uranyl nitrate solution, is disclosed. The calcining apparatus includes a vertical substantially cylindrical inner shell disposed in a vertical substantially cylindrical outer shell, in which inner shell is disposed a fluidized bed comprising the feed stream material to be calcined and spherical beads to aid in heat transfer. Extending through the outer and inner shells is a feed nozzle for delivering feed material or a cleaning chemical to the beads. Disposed in and extending across the lower portion of the inner shell and upstream of the fluidized bed is a support member for supporting the fluidized bed, the support member having uniform slots for directing uniform gas flow to the fluidized bed from a fluidizing gas orifice disposed upstream of the support member. Disposed in the lower portion of the inner shell are a plurality of internal electric resistance heaters for heating the fluidized bed. Disposed circumferentially about the outside length of the inner shell are a plurality of external heaters for heating the inner shell thereby heating the fluidized bed. Further, connected to the internal and external heaters is a means for maintaining the fluidized bed temperature to within plus or minus approximately 25.degree. C. of a predetermined bed temperature. Disposed about the external heaters is the outer shell for providing radiative heat reflection back to the inner shell.

  3. PRESENT STATE OF THE HYDROTHERMAL SYSTEM IN LONG VALLEY CALDERA, CALIFORNIA.

    Science.gov (United States)

    Sorey, Michael L.

    1985-01-01

    Results of test drilling to depths of 2 km and data on the chemical and isotopic content of waters from hot springs and fumaroles permit a conceptual model of the present-day hydrothermal system in Long Valley caldera to be delineated. The model consists of two principal zones in which hot water flows laterally from west to east at depths less than 1 km within and around the resurgent dome. Maximum measured temperatures within these zones are near 170 degree C, but estimates from chemical geothermometers and extrapolation of a high temperature gradient measured in a recent drill hole indicate that a source reservoir at temperatures near 240 degree C may exist at greater depths in the Bishop Tuff beneath the west moat.

  4. Present state of the liner of the reactor; Estado actual del liner del reactor

    Energy Technology Data Exchange (ETDEWEB)

    Aguilar H, F.; Raya A, R.; Mazon R, R. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2001-07-15

    When being presented to work the operation personnel of the reactor, on Monday January 10, 1983, they noticed that the reactor pool was overflowing of water and the floor of the room was partially flooded. The personnel proceeded to revise the feedwater systems to the pool, the Emergency Cooling System of the core and that of Water of Reinstatement, was found that the passing valve of this last it was lightly open. It was discovered that the water that was flooded in the floor of the room it came from the relief valves of the ports TW-1 and RW-2 and of three glides that were in the Thermal Column area. It was proceeded to lower the one level of water of the pool to their normal position and it was clean the water flooded in the salts. (Author)

  5. Present State of the Coacervate-Incoacervate Theory - Origin and Evolution of Cell Structure

    Science.gov (United States)

    Novak, Vladimir J. A.

    1984-12-01

    In agreement with the views of Oparin, Fox, Dose etc., the theory assumes that coacervation of protein-like polyaminoacids began with their accumulation along the coasts of the Archaic water basins. Unlike the above authors, however, the present author views the original coacervates as a suitable “culture medium” from which the first polynucleotides orginated and their partial replication started. Their base sequence was not fortuitous, but determined by the proteinoids on the basis of their mutual affinity. The polyfunctional enzymic activity of the proteinoids catalyzed their replication as well as other activities. Around the replicating DNA molecules secondary coacervates (coacervates in coacervates) accumulated which developed gradually to the first prokaryotic cells. Their most probable evolution to the first eukaryotic organisms is discussed on the basis of the modified Studitsky's synbacteriogenesis theory.

  6. The Present State and Perspective in Treatment of Primary Osteoporosis by Acupuncture and Moxibustion

    Institute of Scientific and Technical Information of China (English)

    赵英侠

    2002-01-01

    @@ Primary osteoporosis, a commonly encountered metabolic bone disease in the postmenopausal women and the aged people, can be classified by modern medicine into postmenopausal osteoporosis (Type I) and senile osteoporosis (Type II). The disease seriously affects health and quality of life of the people as it often cause ostealgia, fracture and the secondary symptoms or diseases. Presently, the pharmacotherapy (including both Chinese herbal drugs and western drugs) remains the first among all other therapeutic methods which are mainly adopted in treatment of the disease at home and abroad. Studies related have been curried out quite early and systematically, and considerable progress has been made, but limit of the pharmacotherapy has also been found. Certain non-drug treatments (such as dietetic therapy, physical exercise, acupuncture and moxibustion, and qigong, especially acupuncture and moxibustion therapy, although with a late start, have been proved effective with satisfactory results. The following is a summary of all the contributions concerned.

  7. 阿尔都塞意识形态国家机器理论及其当代启示%Topic:Althusser's theory of ideological state apparatuses and Contemporary Implications

    Institute of Scientific and Technical Information of China (English)

    周生强

    2012-01-01

    在《意识形态和意识形态国家机器》一文中,阿尔都塞重点探讨了意识形态所具有的特殊作用——即作为统治阶级用以统治的工具,正是这一探讨使得阿尔都塞的理论影响第一次超出了西方马克思主义。从分析阿尔都塞意识形态国家机器理论的基础上,进而得出了阿尔都塞意识形态理论对构建中国主流意识形态的几点启示。%In the article of "Ideology and ideological state apparatuses",Althusser focused on the ideology of the particular role-that is,the ruling class to rule as a tool,it is Althusser's theory of the effect of making for the first time beyond the Western Marxism.This article is from the analysis of Althusser's ideological state apparatuses based on the theory,come to Althusser's theory of ideology to build China's mainstream ideology of the Enlightenment.

  8. Modeling of column apparatus processes

    CERN Document Server

    Boyadjiev, Christo; Boyadjiev, Boyan; Popova-Krumova, Petya

    2016-01-01

    This book presents a new approach for the modeling of chemical and interphase mass transfer processes in industrial column apparatuses, using convection-diffusion and average-concentration models. The convection-diffusion type models are used for a qualitative analysis of the processes and to assess the main, small and slight physical effects, and then reject the slight effects. As a result, the process mechanism can be identified. It also introduces average concentration models for quantitative analysis, which use the average values of the velocity and concentration over the cross-sectional area of the column. The new models are used to analyze different processes (simple and complex chemical reactions, absorption, adsorption and catalytic reactions), and make it possible to model the processes of gas purification with sulfur dioxide, which form the basis of several patents.

  9. ENSO anomalies over the Western United States: present and future patterns in regional climate simulations

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yongxin; Qian, Yun; Duliere, Valerie; Salathe, E.; Leung, Lai-Yung R.

    2012-01-03

    Surface temperature, precipitation, specific humidity and wind anomalies associated with the warm and cold phases of ENSO simulated by WRF and HadRM are examined for the present and future decades. WRF is driven by ECHAM5 and CCSM3, respectively, and HadRM is driven by HadCM3. For the current decades, all simulations show some capability in resolving the observed warm-dry and coolwet teleconnection patterns over the PNW and the Southwest U.S. for warm and cold ENSO. Differences in the regional simulations originate primarily from the respective driving fields. For the future decades, the warm-dry and cool-wet teleconnection patterns in association with ENSO are still represented in ECHAM5-WRF and HadRM. However, there are indications of changes in the ENSO teleconnection patterns for CCSM3-WRF in the future, with wet anomalies dominating in the PNW and the Southwest U.S. for both warm and cold ENSO, in contrast to the canonical patterns of precipitation anomalies. Interaction of anomalous wind flow with local terrain plays a critical role in the generation of anomalous precipitation over the western U.S. Anomalous dry conditions are always associated with anomalous airflow that runs parallel to local mountains and wet conditions with airflow that runs perpendicular to local mountains. Future changes in temperature and precipitation associated with the ENSO events in the regional simulations indicate varying responses depending on the variables examined as well as depending on the phase of ENSO.

  10. Development of technology for coal thermal power generation. Present state and future forecast

    Energy Technology Data Exchange (ETDEWEB)

    Yoshimura, Uichiro

    1987-01-01

    Summary of the 1987 coal technology development projects supported by the Agency of Natural Resources and Energy, and the related data such as positioning of coal thermal power plants, application technoloy system, etc. are presented. The coal power generation technology system projects scheduled for 1980 - 1990 were introduced. For the environmental protection, air polution constitutes a big problem, and technologies of desulfurization, denitration, etc. have been developed. In the field of application technology, liquefaction of coal, utilization of low-grade coals, coal gasification, application to combined cycle power generation, etc. can be quoted. The agency is supporting development of various application technologies as the 1987 projects, among them are: Development of entrained bed coal gasification power plant, Verification experiments of technologies for dry desulfurization for coal thermal power plant, Verification tests for operational improvement of coal thermal power plant, Study on the possibility of introducing large scale fluidized bed boiler to coal thermal power generation, Investigation of new power generation systems, Development of high performance coal thermal power technology, and Development of optimum control system for large scale fluidized bed boiler. (2 tabs, 4 photos)

  11. PRESENT STATE AND POSSIBILITIES OF MAIZE HYBRIDS SEED PRODUCTION WITH THE REVIEW ON THE EXPORT

    Directory of Open Access Journals (Sweden)

    Branimir Šimić

    2004-06-01

    Full Text Available The present seed production of maize in the Republic of Croatia is reduced in relation to the period before the Patriotic War. Production of maize seed in Croatia was between 14,000 and 21,000 tons yearly in the period from 1981 to 1986. It was reduced to 8000 tons yearly in the period from 1989 to 2001. Today, Croatia has 13 processing centres with the capacity approximately 50,000 tons of seed, but utilisation of these capacities is about 40%. Decreasing of maize seed production is caused by market reduction (less areas under the maize in Croatia and reduced export of maize hybrids seed. Before the Patriotic War, Croatia participated in the total seeds export of former Yugoslavia with 35-40%. The largest export of maize seed was 1983, with the approximately 10,700 tons. Seed export of Bc, Os and KWS hybrids was the Eastern European market, while the seed of Pioneer, SES and part of KWS hybrids was exported on the Western European market. Nowadays, production of maize hybrids at Croatia is about 5000 ha (in the world on about 1 mil. ha with the seed export of 3500 tons, approximately. Today, the largest amount of maize seed is exported in Spain, Germany, Italy, Portugal, Bosnia and Herzegovina, Macedonia, Slovenia and Turkey. The total value of maize seed production is 20 mil. Euro, approximately. Seed export should be the basic strategic aim in the program of seed production development because areas occupied with mercantile maize (approximately 400,000 ha cannot completely employ capacities for the production of seed.

  12. Portable pulse X-ray apparatus with gas insulation

    CERN Document Server

    Avilov, E A; Kanunov, I M

    2001-01-01

    There are presented the data on development,investigation and application of a pulse X-ray apparatus with gas insulation.There are described circuit and design solutions for a 90 kV apparatus to be used in medical X-ray diagnostics and 200 kV apparatus to be applied for the researches of high-speed processes.There are demonstrated the advantages of using gas under pressure as insulating medium.There are presented basic output characteristics of the devices.

  13. Outlining Purposes, Stating the Nature of the Present Research, and Listing Research Questions or Hypotheses in Academic Papers

    Science.gov (United States)

    Shehzad, Wasima

    2011-01-01

    Driving research questions from the prevailing issues and interests and developing from them new theories, formulas, algorithms, methods, and designs, and linking them to the interests of the larger audience is a vital component of scientific research papers. The present article discusses outlining purposes or stating the nature of the present…

  14. Perspectives on the Present State and Future of Higher Education Faculty Development in Kazakhstan: Implications for National Human Resource Development

    Science.gov (United States)

    Seitova, Dinara

    2016-01-01

    The article aims at examining the present state of higher education faculty development in Kazakhstan in the context of multidimensional nationwide development reforms and exploring implications for the National Human Resource Development of the country. For the purpose of this research, theoretical human resource development (HRD) and…

  15. Specifications for gas treatment apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Teraoka, Yuden; Yoshigoe, Akitaka [Japan Atomic Energy Research Inst., Kansai Research Establishment, Synchrotron Radiation Research Center, Mikazuki, Hyogo (Japan)

    2001-03-01

    A surface reaction analysis apparatus was installed as an experimental end-station for the study of surface chemistry at the JAERI soft x-ray beamline in the SPring-8. The surface reaction analysis apparatus is devoted to the study of reaction mechanisms on solid surfaces with incident gas molecules. It is necessary to supply reagent gases to the apparatus. Chlorine and metal organic molecules will be used in the apparatus as well as oxygen molecules. Since the chlorine is corrosive and virulent, the metal organic molecules are flammable, the satiety treatments and the removal of virulence from the exhaust gas are needed. This gas supply and exhaust system is mainly composed of a cylinder cabinet, a gas mixer, a virulence removal cell and an urgent virulence removal apparatus. The former three devices are considered to take a countermeasure against virulent gas leak. The detail specifications concerning the gas supply and exhaust system are described in this report. (author)

  16. Archimedes force on Casimir apparatus

    Directory of Open Access Journals (Sweden)

    Shevchenko V.

    2016-01-01

    Full Text Available The talk addresses a problem of Casimir apparatus in weak gravitational field, surrounded by a dense medium. The falling of the apparatus has to be governed by the equivalence principle, taking into account proper contributions to the weight of the apparatus from its material part and from distorted quantum fields. We discuss general ex pression for the corresponding force in terms of the effective action. By way of example we compute explicit expression for Archimedes force, acting on the Casimir apparatus of finite size, immersed into thermal bath of free scalar field. It is shown that besides universal term, proportional to the volume of the apparatus, there are non-universal quantum corrections, depending on the boundary conditions.

  17. Archimedes force on Casimir apparatus

    Science.gov (United States)

    Shevchenko, V.; Shevrin, E.

    2016-11-01

    The talk addresses a problem of Casimir apparatus in weak gravitational field, surrounded by a dense medium. The falling of the apparatus has to be governed by the equivalence principle, taking into account proper contributions to the weight of the apparatus from its material part and from distorted quantum fields. We discuss general ex pression for the corresponding force in terms of the effective action. By way of example we compute explicit expression for Archimedes force, acting on the Casimir apparatus of finite size, immersed into thermal bath of free scalar field. It is shown that besides universal term, proportional to the volume of the apparatus, there are non-universal quantum corrections, depending on the boundary conditions.

  18. FLUID CONTACTOR APPARATUS

    Science.gov (United States)

    Spence, R.; Streeton, R.J.W.

    1956-04-17

    The fluid contactor apparatus comprises a cylindrical column mounted co- axially and adapted to rotate within a cylindrical vessel, for the purpose of extracting a solute from am aqueous solution by means of an organic solvent. The column is particularly designed to control the vortex pattern so as to reduce the height of the vortices while, at the same time, the width of the annular radius in the radial direction between the vessel and column is less than half the radius of the column. A plurality of thin annular fins are spaced apart along the rotor approximately twice the radial dimension of the column such that two contrarotating substantially circular vortices are contained within each pair of fins as the column is rotated.

  19. Spine immobilization apparatus

    Science.gov (United States)

    Lambson, K. H.; Vykukal, H. C. (Inventor)

    1981-01-01

    The apparatus makes use of a normally flat, flexible bladder filled with beads or micro-balloons that form a rigid mass when the pressure within the bladder is decreased below ambient through the use of a suction pump so that the bladder can be conformed to the torso of the victim and provide the desired restraint. The bladder is strapped to the victim prior to being rigidified by an arrangement of straps which avoid the stomach area. The bladder is adapted to be secured to a rigid support, i.e., a rescue chair, so as to enable removal of a victim after the bladder has been made rigid. A double sealing connector is used to connect the bladder to the suction pump and a control valve is employed to vary the pressure within the bladder so as to soften and harden the bladder as desired.

  20. ABOUT THE BASICS OF HUMAN THINKING APPARATUS

    Directory of Open Access Journals (Sweden)

    Yuriy Mikhailovich AMIRBEGOV

    2015-01-01

    Full Text Available The main subject of our research is the integrity of the thinking apparatus of humans with its extremes, one of which is known to us as cause-effect materiality, denoted by the term ―brain‖, and the other extreme is unknown but is supposed as an immaterial cause of the motion needed to ―revitalize‖ the material extreme in response to revitalizing effects, reacting with changes the order and direction of which are realized by light streams (oscillation spectrum in the range of light waves and sounds of different tones (oscillation spectrum in the range of sound waves. But for realization of light streams and sound streams into images and words is needed not only information streams regulator (dominant factor, changing their vectors in the integrity of the human thinking apparatus, but also verifier of oscillations is needed which requires philosophical comprehension.While modeling the thinking apparatus of humans by dialectical method of reasoning, we had to abandon the conventional opinions about reality, matter, motion, and take on trust the opinions which have not been confirmed but are logically essential – a divine spark of Aristotle and permanent impacts taking the material world out of a cold death…, what led to the solution of the problem: as a result was found the second, immaterial extreme of the integrity of human thinking apparatus and the dominant factor focusing the flow of information in the CNS and having the significance of the status of the monarch. Actually, the proposed model of human thinking apparatus, which has no analogue, presents the novelty of the worldview which answers the question: what is thinking, why and how, and what is realized by us, our mortal body and immortal soul identifying our ―I‖.

  1. Apparatus for measuring particle properties

    Science.gov (United States)

    Rader, D.J.; Castaneda, J.N.; Grasser, T.W.; Brockmann, J.E.

    1998-08-11

    An apparatus is described for determining particle properties from detected light scattered by the particles. The apparatus uses a light beam with novel intensity characteristics to discriminate between particles that pass through the beam and those that pass through an edge of the beam. The apparatus can also discriminate between light scattered by one particle and light scattered by multiple particles. The particle`s size can be determined from the intensity of the light scattered. The particle`s velocity can be determined from the elapsed time between various intensities of the light scattered. 11 figs.

  2. Twin-image elimination apparatus and method

    OpenAIRE

    1996-01-01

    The twin-image elimination apparatus of the present invention comprises (a) a scanning light source for emitting a scanning light beam; (b) an interference device which converts the scanning light beam from the scanning light source into a spherical wave and a plane wave having temporal frequencies different from each other and combines the spherical and plane waves together; (c) a scanner for scanning an object with the combined light beam from the interference device; (d) a photodetector fo...

  3. Radioactive waste material melter apparatus

    Science.gov (United States)

    Newman, D.F.; Ross, W.A.

    1990-04-24

    An apparatus for preparing metallic radioactive waste material for storage is disclosed. The radioactive waste material is placed in a radiation shielded enclosure. The waste material is then melted with a plasma torch and cast into a plurality of successive horizontal layers in a mold to form a radioactive ingot in the shape of a spent nuclear fuel rod storage canister. The apparatus comprises a radiation shielded enclosure having an opening adapted for receiving a conventional transfer cask within which radioactive waste material is transferred to the apparatus. A plasma torch is mounted within the enclosure. A mold is also received within the enclosure for receiving the melted waste material and cooling it to form an ingot. The enclosure is preferably constructed in at least two parts to enable easy transport of the apparatus from one nuclear site to another. 8 figs.

  4. Cherry-Slush-Candling Apparatus

    Science.gov (United States)

    Stephens, James B.; Weiss, James R.; Hoover, Gordon

    1996-01-01

    Proposed infrared-scanning apparatus for use in bakeries making cherry pies detect cherry pits remaining in cherry slush after pitting process. Pits detected via their relative opacity to infrared radiation.

  5. Continuous steel production and apparatus

    Science.gov (United States)

    Peaslee, Kent D.; Peter, Jorg J.; Robertson, David G. C.; Thomas, Brian G.; Zhang, Lifeng

    2009-11-17

    A process for continuous refining of steel via multiple distinct reaction vessels for melting, oxidation, reduction, and refining for delivery of steel continuously to, for example, a tundish of a continuous caster system, and associated apparatus.

  6. Apparatus for photon excited catalysis

    Science.gov (United States)

    Saffren, M. M. (Inventor)

    1977-01-01

    An apparatus is described for increasing the yield of photonically excited gas phase reactions by extracting excess energy from unstable, excited species by contacting the species with the surface of a finely divided solid.

  7. A versatile platform for manipulating photonic spin and orbital states based on liquid crystal microstructures (Conference Presentation)

    Science.gov (United States)

    Lu, Yan-Qing; Hu, Wei; Ming, Yang

    2016-09-01

    Utilizing the spin degree of freedom breaks new ground for designing photonic devices. Seeking out a suitable platform for flexible steering of photonic spin states is a critical task. In this work, we demonstrate a versatile Liquid crystal (LC) based platform for manipulating photonic spin and orbital states. Owing to the photoalignment technique, the local and fine tuning of the LC medium is effectively implemented to form various anisotropic microstructures. The light-matter interaction in the corresponding medium is tailored to control the evolution of photonic spin states. The physical mechanism of such a system is investigated, and the corresponding dynamical equation is obtained. The high flexibility endows the LC-based photonic system with great value to be used for Hamiltonian engineering. As an illustration, the optical analogue of intrinsic spin Hall effect (SHE) in electronic systems is presented. The pseudospins of photons are driven to split by the anisotropic effective magnetic field arising from the inhomogeneous spin-orbit interaction (SOI) in the twisting microstructures. In virtue of the designability of the LC-based platform, the form of the interaction Hamiltonian is regulated to present diverse PSHE phenomena, which is hard to be realized in the solid electronic systems. Some representative samples are prepared for experimental observation, and the results are in good agreement with theoretical predictions. We believe the tunable LC system may shed new light on future photonic quantum applications.

  8. Apparatus, System, and Method for Forward Osmosis in Water Reuse

    KAUST Repository

    Yangali-Quintanilla, Victor

    2013-01-03

    An apparatus, system, and method for desalinating water is presented. The invention relates to recovery of water from impaired water sources by using FO and seawater as draw solution (DS). The seawater becomes diluted over time and can be easily desalinated at very low pressures. Thus, a device consumes less energy when recovering water. The apparatus, system and method comprise an immersed forward osmosis cell.

  9. Data structures and apparatuses for representing knowledge

    Science.gov (United States)

    Hohimer, Ryan E; Thomson, Judi R; Harvey, William J; Paulson, Patrick R; Whiting, Mark A; Tratz, Stephen C; Chappell, Alan R; Butner, Robert S

    2014-02-18

    Data structures and apparatuses to represent knowledge are disclosed. The processes can comprise labeling elements in a knowledge signature according to concepts in an ontology and populating the elements with confidence values. The data structures can comprise knowledge signatures stored on computer-readable media. The knowledge signatures comprise a matrix structure having elements labeled according to concepts in an ontology, wherein the value of the element represents a confidence that the concept is present in an information space. The apparatus can comprise a knowledge representation unit having at least one ontology stored on a computer-readable medium, at least one data-receiving device, and a processor configured to generate knowledge signatures by comparing datasets obtained by the data-receiving devices to the ontologies.

  10. Apparatus Development In Maros

    Directory of Open Access Journals (Sweden)

    H. Aras Solong

    2015-03-01

    Full Text Available ABSTRACT This study aims to identify and describe 1 Development of Administrative through education and training training promotion transfer and rotation and the application of demotion system non-title under Law No. 43 of 1999 on the development of career civil servants based merit system and work performance and Government Regulation No. 101 of 2000 on Education and Training Training for Civil Servants. 2 Revealing differences in work motivation based on the intensity of the education or training training using Herzbergs Two Factor Theory of extrinsic factors hygiene and intrinsic factors motivator that influence employees motivation Maros regency government in carrying out its duties and functions as members civil in public service. This study uses a quantitative approach to date collection techniques through a questionnaire Questionnaire. Informant are civil servants who occupied echelon II III. And IV while the analysis of the date used quantitative analysis to uncover the implementation of personnel development and employees motivation difference Maros region based on the intensity of the education or training training to get job satisfaction in the public service. The results of this study will reveal that 1 Development of Apparatus for improving the knowledge ability professionalism competence skills can work as a reformer change attitude eager to work motivated to do the work get satisfaction in work and getting justice in employment. 2 The difference in work motivation Maros local government employees affected by extrinsic factors hygiene and intrinsic factor motivator is the variable gain high salary H occupies the first ranking while serving the community satisfaction variables M occupy the last ranking. That is that the satisfaction of serving the people affected by the high salaries earned by the employees to do the job.

  11. Towards a ^87Rb BEC apparatus with reconfigurable arbitrary optical potentials and artificial gauge fields

    Science.gov (United States)

    Niffenegger, Robert; Olson, Abraham; Chen, Yong P.

    2012-06-01

    We have constructed an all-optical ^87Rb BEC apparatus, which is currently creating condensates in a 1550nm cross beam optical dipole trap every 30s. We present experimental progress toward implementing reconfigurable arbitrary optical potentials and artificial gauge fields in our apparatus. Time-averaged, dynamically-reconfigurable, arbitrary-shaped optical potentials are generated using a dual-axis AOM controlled by a two-channel high-bandwidth arbitrary RF waveform generator. Using a blue-detuned 532nm laser, we have demonstrated various optical potential geometries such as a tilting wedge, checkerboard and elliptical barriers. Such arbitrary, reconfigurable optical potentials will be used to explore quantum phase transitions in superfluids. Our excellent optical access also allows the addition of Raman beams of various arrangements. Raman dressed states can be used to induce spin dependent artificial gauge fields for studying physics such as the spin Hall effect.

  12. The spinning apparatus of webspinners--functional-morphology, morphometrics and spinning behaviour.

    Science.gov (United States)

    Büsse, Sebastian; Hörnschemeyer, Thomas; Hohu, Kyle; McMillan, David; Edgerly, Janice S

    2015-05-07

    Webspinners (Insecta: Embioptera) have a distinctly unique behaviour with related morphological characteristics. Producing silk with the basitarsomeres of their forelegs plays a crucial role in the lives of these insects--providing shelter and protection. The correlation between body size, morphology and morphometrics of the spinning apparatus and the spinning behaviour of Embioptera was investigated for seven species using state-of-the-art methodology for behavioural as well as for morphological approaches. Independent contrast analysis revealed correlations between morphometric characters and body size. Larger webspinners in this study have glands with greater reservoir volume, but in proportionally smaller tarsi relative to body size than in the smaller species. Furthermore, we present a detailed description and review of the spinning apparatus in Embioptera in comparison to other arthropods and substantiate the possible homology of the embiopteran silk glands to class III dermal silk glands of insects.

  13. Immunochemical studies of 22S protein from isolated mitotic apparatus.

    Science.gov (United States)

    Bibring, T; Baxandall, J

    1969-05-01

    Evidence is presented that the "22S protein" of mitotic apparatus isolated from sea urchin eggs is not microtubule protein. An antibody preparation active against 22S protein is described, and immunochemical studies of the distribution of 22S protein in various cellular fractions and among morphological features of mitotic apparatus are reported. The protein is ubiquitous in the metaphase egg fractions that were tested but is not found in sperm flagella. It is immunologically distinct from proposed microtubule protein isolated from mitotic apparatus by the method of Sakai, and from proposed microtubule protein obtained after extraction with mild acid. It exists in nontubule material of isolated mitotic apparatus but is not detectable in microtubules.

  14. Monolith filter apparatus and membrane apparatus, and method using same

    Energy Technology Data Exchange (ETDEWEB)

    Goldsmith, Robert L [Wayland, MA

    2012-04-03

    A filtration apparatus that separates a liquid feedstock mixed with a gas into filtrate and retentate, the apparatus including at least one filtration device comprised of at least one monolith segment of porous material that defines a plurality of passageways extending longitudinally from a feed face of the structure to a retentate end face. The filtration device contains at least one filtrate conduit within it for carrying filtrate toward a filtrate collection zone, the filtrate conduit providing a path of lower flow resistance than that of alternative flow paths through the porous material of the device. The filtration device can also be utilized as a membrane support for a device for microfiltration, ultrafiltration, nanofiltration, reverse osmosis, or pervaporation. Also disclosed is a method for using such a filtration apparatus.

  15. The Prototype of GAMMA-400 Apparatus

    Science.gov (United States)

    Arkhangelskiy, A. I.; Arkhangelskaja, I. V.; Kheymits, M. D.; Runtso, M. F.; Suchkov, S. I.; Topchiev, N. P.; Yurkin, Yu. T.

    Scientific project GAMMA-400 (Gamma-Astronomy Multifunction Modules Apparatus) relates to the new generation of space observatories for investigation of cosmic γ-emission in the energy band from ∼20 MeV up to several TeV, electron/positron fluxes from ∼1 GeV up to ∼10 TeV and cosmic-ray nuclei fluxes with energies up to ∼1015 eV by means of GAMMA-400 gamma-telescope represents the core of the scientific complex. The investigation of gamma ray bursts in the energy band of 10 keV-15 MeV are possible too by means of KONUS-FG apparatus included in the complex. For γ-rays in the energy region from 10 to 100 GeV expected energy resolution changes from ∼3% to ∼1% and angular resolution from ∼0.1% to ∼ 0.01% respectively, γ/protons rejection factor is ∼5·105. The GAMMA-400 satellite will be launched at the beginning of the next decade on the high apogee orbit with following initial parameters: apogee altitude ∼300000 km, perigee altitude ∼500 km, rotation period ∼7 days, inclination to the equator plane 51.4°. The active functioning interval will be 7-10 years. The scientific complex will have next main technical parameters: total weight ∼4100 kg, power consumption ∼2000 W, information quote 100 GByte/day. During the project development, the prototype of apparatus was created for working-off of the main apparatus construction units in laboratory conditions. The main distinctive features of the prototype are presented.

  16. Model analyses of atmospheric mercury: present air quality and effects of transpacific transport on the United States

    Directory of Open Access Journals (Sweden)

    H. Lei

    2013-04-01

    Full Text Available Atmospheric mercury is a toxic air and water pollutant that is of significant concern because of its effects on human health and ecosystems. A mechanistic representation of the atmospheric mercury cycle is developed for the state-of-the-art global climate-chemistry model, CAM-Chem (Community Atmospheric Model with Chemistry. The model simulates the emission, transport, transformation and deposition of atmospheric mercury (Hg in three forms: elemental mercury (Hg(0, reactive mercury (Hg(II, and particulate mercury (PHg. Emissions of mercury include those from human, land, ocean, biomass burning and volcano related sources. Land emissions are calculated based on surface solar radiation flux and skin temperature. A simplified air–sea mercury exchange scheme is used to calculate emissions from the oceans. The chemistry mechanism includes the oxidation of Hg(0 in gaseous phase by ozone with temperature dependence, OH, H2O2 and chlorine. Aqueous chemistry includes both oxidation and reduction of Hg(0. Transport and deposition of mercury species are calculated through adapting the original formulations in CAM-Chem. The CAM-Chem model with mercury is driven by present meteorology to simulate the present mercury air quality during the 1999–2001 periods. The resulting surface concentrations of total gaseous mercury (TGM are then compared with the observations from worldwide sites. Simulated wet depositions of mercury over the continental United States are compared to the observations from 26 Mercury Deposition Network stations to test the wet deposition simulations. The evaluations of gaseous concentrations and wet deposition confirm a strong capability for the CAM-Chem mercury mechanism to simulate the atmospheric mercury cycle. The results also indicate that mercury pollution in East Asia and Southern Africa is very significant with TGM concentrations above 3.0 ng m−3. The comparison to wet deposition indicates that wet deposition patterns of

  17. A method for closed-loop presentation of sensory stimuli conditional on the internal brain-state of awake animals.

    Science.gov (United States)

    Rutishauser, Ueli; Kotowicz, Andreas; Laurent, Gilles

    2013-04-30

    Brain activity often consists of interactions between internal-or on-going-and external-or sensory-activity streams, resulting in complex, distributed patterns of neural activity. Investigation of such interactions could benefit from closed-loop experimental protocols in which one stream can be controlled depending on the state of the other. We describe here methods to present rapid and precisely timed visual stimuli to awake animals, conditional on features of the animal's on-going brain state; those features are the presence, power and phase of oscillations in local field potentials (LFP). The system can process up to 64 channels in real time. We quantified its performance using simulations, synthetic data and animal experiments (chronic recordings in the dorsal cortex of awake turtles). The delay from detection of an oscillation to the onset of a visual stimulus on an LCD screen was 47.5ms and visual-stimulus onset could be locked to the phase of ongoing oscillations at any frequency ≤40Hz. Our software's architecture is flexible, allowing on-the-fly modifications by experimenters and the addition of new closed-loop control and analysis components through plugins. The source code of our system "StimOMatic" is available freely as open-source.

  18. Response-time evidence for mixed memory states in a sequential-presentation change-detection task.

    Science.gov (United States)

    Nosofsky, Robert M; Donkin, Chris

    2016-02-01

    Response-time (RT) and choice-probability data were obtained in a rapid visual sequential-presentation change-detection task in which memory set size, study-test lag, and objective change probabilities were manipulated. False "change" judgments increased dramatically with increasing lag, consistent with the idea that study items with long lags were ejected from a discrete-slots buffer. Error RTs were nearly invariant with set size and lag, consistent with the idea that the errors were produced by a stimulus-independent guessing process. The patterns of error and RT data could not be explained in terms of encoding limitations, but were consistent with the hypothesis that long retention lags produced a zero-stimulus-information state that required guessing. Formal modeling of the change-detection RT and error data pointed toward a hybrid model of visual working memory. The hybrid model assumed mixed states involving a combination of memory and guessing, but with higher memory resolution for items with shorter retention lags. The work raises new questions concerning the nature of the memory representations that are produced across the closely related tasks of change detection and visual memory search.

  19. U.S. Natural Gas System Methane Emissions: State of Knowledge from LCAs, Inventories, and Atmospheric Measurements (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Heath, G.

    2014-04-01

    Natural gas (NG) is a potential "bridge fuel" during transition to a decarbonized energy system: It emits less carbon dioxide during combustion than other fossil fuels and can be used in many industries. However, because of the high global warming potential of methane (CH4, the major component of NG), climate benefits from NG use depend on system leakage rates. Some recent estimates of leakage have challenged the benefits of switching from coal to NG, a large near-term greenhouse gas (GHG) reduction opportunity. During this presentation, Garvin will review evidence from multiple perspectives - life cycle assessments (LCAs), inventories and measurements - about NG leakage in the US. Particular attention will be paid to a recent article in Science magazine which reviewed over 20 years of published measurements to better understand what we know about total methane emissions and those from the oil and gas sectors. Scientific and policy implications of the state of knowledge will be discussed.

  20. Diversity of lampreys and fishes of the Upper Vistula River drainage, Poland: present state and future challenges

    Directory of Open Access Journals (Sweden)

    Michał Nowak

    2010-12-01

    Full Text Available There have been some 57 lamprey and fish species recorded in the Upper Vistula Riverdrainage (S-E Poland. Among these there are a number of species-complexes (Carassius auratus, Gobiogobio, Cobitis taenia with unresolved taxonomy. Identity of some others (Barbus waleckii, Romanogobioalbipinnatus, Cottus gobio is questionable and needs a review. Phylogenetic relationships of anotherones (Eudontomyzon mariae, Lampetra planeri, Lampetra fluviatilis is also under debate. Knowledgeabout the distribution of many species is very scarce and needs to be filled. In the current work webriefly summarise present state of the diversity and classification of lampreys and fishes of the UpperVistula drainage and point some urgent questions that have arose in recent years and are waiting fornew solutions.

  1. Oil recovery apparatus and method

    Energy Technology Data Exchange (ETDEWEB)

    Lowe, J.G.

    1981-05-19

    An oil recovery apparatus and method, particularly for removing oil and grease from the discharge of dishwashing machines or the like, provides a small size assembly employing the same principle as in U.S. Pat. No. 4,051,024. This apparatus and method employs single rotating discs of plastic or plastic coated material and each disk has a pair of scraper blades arranged to scrape opposite sides of the rotating blade. Exterior of the container for the oil recovery apparatus is at least one filter basket adapted to receive the flow into the strainer container of large particles of food and other waste such as cigarette butts and the like. Each filter is disposed for the ready cleaning of accumulated matter from the basket. There is shown plural filters, valve controls, auxiliary heating and disc support means to be more fully described.

  2. A simple Cavendish experimental apparatus

    Science.gov (United States)

    Kossler, W. J.; Klein, Susann; Morrow, Dominick; Juliao, Andre

    2016-03-01

    A simple Cavendish apparatus is described that allows measurement of the gravitational constant G and makes observable the gravitational attraction between commonplace objects. The apparatus consists of a torsion balance constructed from readily available materials, including lead bricks and fishing weights ("sinkers"). A computer program is used to determine the gravitational field at the location of the small mass due to a nearby lead brick, which allows students to gain experience with numerical methods. Experimental results obtained are compatible with the accepted value of G.

  3. New testing plausibilities of the danish triaxial apparatus

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    2017-01-01

    The Danish triaxial apparatus can test soil specimens with isotropic stress states. Isotropic stress produces isotropic yielding - the shear zone is distributed equally across the whole volume of a specimen. This prevents localized fracture cracking) and bulging. As the soil specimen remain intact...

  4. Waste Water Treatment Apparatus and Methods

    Science.gov (United States)

    Littman, Howard (Inventor); Plawsky, Joel L. (Inventor); Paccione, John D. (Inventor)

    2014-01-01

    An improved draft tube spout fluid bed (DTSFB) mixing, handling, conveying, and treating apparatus and systems, and methods for operating are provided. The apparatus and systems can accept particulate material and pneumatically or hydraulically conveying the material to mix and/or treat the material. In addition to conveying apparatus, a collection and separation apparatus adapted to receive the conveyed particulate material is also provided. The collection apparatus may include an impaction plate against which the conveyed material is directed to improve mixing and/or treatment. The improved apparatus are characterized by means of controlling the operation of the pneumatic or hydraulic transfer to enhance the mixing and/or reacting by controlling the flow of fluids, for example, air, into and out of the apparatus. The disclosed apparatus may be used to mix particulate material, for example, mortar; react fluids with particulate material; coat particulate material, or simply convey particulate material.

  5. Measuring Apparatus for Coal Powder

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The measuring apparatus for coal powder, equipped with radioactive source, is a set of device andcan be used to measure the density in the pipes and cumulative consumed amount of coal powder in apower plant, and to examine and display the status of the coal powder input system. It is sketched asFig. 1.

  6. Apparatus for measuring fluid flow

    Science.gov (United States)

    Smith, J.E.; Thomas, D.G.

    Flow measuring apparatus includes a support loop having strain gages mounted thereon and a drag means which is attached to one end of the support loop and which bends the sides of the support loop and induces strains in the strain gages when a flow stream impacts thereon.

  7. The ALPHA antihydrogen trapping apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Amole, C. [Department of Physics and Astronomy, York University, Toronto ON Canada, M3J 1P3 (Canada); Andresen, G.B. [Department of Physics and Astronomy, Aarhus University, DK-8000 Aarhus C (Denmark); Ashkezari, M.D. [Department of Physics, Simon Fraser University, Burnaby, BC Canada, V5A 1S6 (Canada); Baquero-Ruiz, M. [Department of Physics, University of California at Berkeley, Berkeley, CA 94720-7300 (United States); Bertsche, W. [Department of Physics, College of Science, Swansea University, Swansea SA2 8PP (United Kingdom); School of Physics and Astronomy, University of Manchester, Manchester M13 9PL (United Kingdom); The Cockcroft Institute, Warrington WA4 4AD (United Kingdom); Bowe, P.D. [Department of Physics and Astronomy, Aarhus University, DK-8000 Aarhus C (Denmark); Butler, E. [Physics Department, CERN, CH-1211 Geneva 23 (Switzerland); Capra, A. [Department of Physics and Astronomy, York University, Toronto ON Canada, M3J 1P3 (Canada); Carpenter, P.T. [Department of Physics, Auburn University, Auburn, AL 36849-5311 (United States); Cesar, C.L. [Instituto de Física, Universidade Federal do Rio de Janeiro, Rio de Janeiro 21941-972 (Brazil); Chapman, S. [Department of Physics, University of California at Berkeley, Berkeley, CA 94720-7300 (United States); Charlton, M.; Deller, A.; Eriksson, S. [Department of Physics, College of Science, Swansea University, Swansea SA2 8PP (United Kingdom); Escallier, J. [Brookhaven National Laboratory, Upton, NY 11973 (United States); Fajans, J. [Department of Physics, University of California at Berkeley, Berkeley, CA 94720-7300 (United States); Friesen, T. [Department of Physics and Astronomy, University of Calgary, Calgary AB, Canada, T2N 1N4 (Canada); Fujiwara, M.C.; Gill, D.R. [TRIUMF, 4004 Wesbrook Mall, Vancouver BC, Canada V6T 2A3 (Canada); Gutierrez, A. [Department of Physics and Astronomy, University of British Columbia, Vancouver BC, Canada V6T 1Z4 (Canada); and others

    2014-01-21

    The ALPHA collaboration, based at CERN, has recently succeeded in confining cold antihydrogen atoms in a magnetic minimum neutral atom trap and has performed the first study of a resonant transition of the anti-atoms. The ALPHA apparatus will be described herein, with emphasis on the structural aspects, diagnostic methods and techniques that have enabled antihydrogen trapping and experimentation to be achieved.

  8. Feature Referenced Error Correction Apparatus.

    Science.gov (United States)

    A feature referenced error correction apparatus utilizing the multiple images of the interstage level image format to compensate for positional...images and by the generation of an error correction signal in response to the sub-frame registration errors. (Author)

  9. Magnetic separation apparatus and methods

    NARCIS (Netherlands)

    Tibbe, Arjan; Scholtens, Tycho M.; Terstappen, Leon W.M.M.

    2010-01-01

    Apparatuses and methods for separating, immobilizing, and quantifying biological substances from within a fluid medium. Biological substances are observed by employing a vessel (6) having a chamber therein, the vessel comprising a transparent collection wall (5). A high internal gradient magnetic ca

  10. Present state and perspective of downstream processing of biologically produced 1,3-propanediol and 2,3-butanediol.

    Science.gov (United States)

    Xiu, Zhi-Long; Zeng, An-Ping

    2008-04-01

    1,3-Propanediol and 2,3-butanediol are two promising chemicals which have a wide range of applications and can be biologically produced. The separation of these diols from fermentation broth makes more than 50% of the total costs in their microbial production. This review summarizes the present state of methods studied for the recovery and purification of biologically produced diols, with particular emphasis on 1,3-propoanediol. Previous studies on the separation of 1,3-propanediol primarily include evaporation, distillation, membrane filtration, pervaporation, ion exchange chromatography, liquid-liquid extraction, and reactive extraction. Main methods for the recovery of 2,3-butanediol include steam stripping, pervaporation, and solvent extraction. No single method has proved to be simple and efficient, and improvements are especially needed with regard to yield, purity, and energy consumption. Perspectives for an improved downstream processing of biologically produced diols, especially 1,3-propanediol are discussed based on our own experience and recent work. It is argued that separation technologies such as aqueous two-phase extraction with short chain alcohols, pervaporation, reverse osmosis, and in situ extractive or pervaporative fermentations deserve more attention in the future.

  11. Present state and outlook of mineral resources in Peru; Peru no chika shigen no genjo to shorai

    Energy Technology Data Exchange (ETDEWEB)

    Saito, A. [Mitsui Mineral Development Engineering Co. Ltd., Tokyo (Japan)

    1997-07-05

    This paper introduces the present state and outlook of mineral resources in Peru. Peru is a great mineral resource country in the world. Silver (the third in the world in 1993), lead (the fifth), zinc (the fourth), tin (the fifth), copper (the sixth), gold (the fourteenth), and iron are occurred as main mineral resources. Peru was laid waste due to long-term colonial rule by Spain. After the independence, confusion caused by the political distrust and breakdown of national economy was continued. Mineral resources were not utilized, effectively. Based on the nationalism of mineral resources, mines were nationalized after the 1970`s. Thus, mines lost the international competitive power due to the withdrawal of overseas capitals. Recently, based on the privatization policy, national mines have been sold through bids with participation of foreign capitals. Law systems for the development have been also arranged, which results in the ambitious participation of major mining companies in the world for the development. Survey companies have gone into the exploration. Prevention of environmental pollution, such as waste water quality standards, has been promoted. Environmental pollution by the illegal alluvial mining is serious. The government is promoting the positive measures. 7 refs., 5 figs., 3 tabs.

  12. A technical assistance on data collection on subdivision of wet-system apparatuses.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-01

    In the Ningyo-Toge Environmental Engineering Center, development on subdivision engineering system for abolition of nuclear fuel facilities has been promoted. However, data on subdivision of instruments and apparatuses to be carried out as a part of the abolition was insufficient. Therefore, here was intended to investigate data collections so as to use subdivision of a wet-system apparatuses of the smelting conversion facility begun on June, 2000, as a field of data collection as effectively as possible, on construction of the system rationally supporting abolition of nuclear fuel facility promoted at the Ningyo-Toge Environmental Engineering Center. This subdivision of the wet-system apparatuses of the facility is programmed to carry out the subdivision for two years of 2000 and 2001 fiscal years. Its working procedure is begun from non-polluted matters (electrics, instruments, and utility pipings) at every rooms to carry out appliances using uranium. Here were reported on present states survey of the subdivision, kinds and frequencies of data at the subdivision, data collection manual, and rationalization of data recording method. (G.K.)

  13. Real-time self-networking radiation detector apparatus

    Science.gov (United States)

    Kaplan, Edward; Lemley, James; Tsang, Thomas Y.; Milian, Laurence W.

    2007-06-12

    The present invention is for a radiation detector apparatus for detecting radiation sources present in cargo shipments. The invention includes the features of integrating a bubble detector sensitive to neutrons and a GPS system into a miniaturized package that can wirelessly signal the presence of radioactive material in shipping containers. The bubble density would be read out if such indicated a harmful source.

  14. Testing of defects in Si semiconductor apparatus by using single-photon detection

    Energy Technology Data Exchange (ETDEWEB)

    Zhongliang, Pan, E-mail: panz@scnu.edu.cn [Laboratory of Quantum Information Technology, School of Physics and Telecommunications Engineering, South China Normal University, Guangzhou 510006 (China); Ling, Chen [Laboratory of Quantum Information Technology, School of Physics and Telecommunications Engineering, South China Normal University, Guangzhou 510006 (China); Guangju, Chen [Department of Automation, University of Electronics Science and Technology of China, Chengdu 610054 (China)

    2013-07-15

    The failure analysis of semiconductor apparatus is very needed for ensuring product quality, which can find several types of defects in the semiconductor apparatus. A new testing method for the defects in Si semiconductor apparatus is presented in this paper, the method makes use of photon emissions to find out the failure positions or failure components by taking advantage of the infrared photo emission characteristics of semiconductor apparatus. These emitted photons carry the information of the apparatus structure. If there are defects in the apparatus, these photons can help in understanding the apparatus properties and detecting the defects. An algorithm for the generation of circuit input vectors are presented in this paper to enhance the strength of the emitted photons for the given components in the semiconductor apparatus. The multiple-valued logic, the static timing analysis and path sensitizations, are used in the algorithm. A lot of experimental results for the Si semiconductor apparatus show that many types of defects such as contact spiking and latchup failure etc., can be detected accurately by the method proposed in this paper.

  15. Creating Reports Using Longitudinal Data: How States Can Present Information to Support Student Learning and School System Improvement

    Science.gov (United States)

    Data Quality Campaign, 2010

    2010-01-01

    Now that all 50 states and the District of Columbia are building statewide longitudinal data systems, the next step is to ensure that the information in these systems is used to improve student learning. The Data Quality Campaign (DQC) has identified 10 actions that states can take to ensure that the right data are available and accessible and…

  16. Present state of global wetland extent and wetland methane modelling: methodology of a model intercomparison project (WETCHIMP

    Directory of Open Access Journals (Sweden)

    R. Wania

    2012-12-01

    Full Text Available The Wetland and Wetland CH4 Intercomparison of Models Project (WETCHIMP was created to evaluate our present ability to simulate large-scale wetland characteristics and corresponding methane (CH4 emissions. A multi-model comparison is essential to evaluate the key uncertainties in the mechanisms and parameters leading to methane emissions. Ten modelling groups joined WETCHIMP to run eight global and two regional models with a common experimental protocol using the same climate and atmospheric carbon dioxide (CO2 forcing datasets. We reported the main conclusions from the intercomparison effort in a companion paper (Melton et al., 2012. Here we provide technical details for the six experiments, which included an equilibrium, a transient, and an optimized run plus three sensitivity experiments (temperature, precipitation, and atmospheric CO2 concentration. The diversity of approaches used by the models is summarized through a series of conceptual figures, and is used to evaluate the wide range of wetland extents and CH4 fluxes predicted by the models in the equilibrium run. We discuss relationships among the various approaches and patterns in consistencies of these model predictions. Within this group of models, there are three broad classes of methods used to estimate wetland extent: prescribed based on wetland distribution maps, prognostic relationships between hydrological states based on satellite observations, and explicit hydrological mass balances. A larger variety of approaches was used to estimate the net CH4 fluxes from wetland systems. Even though modelling of wetland extents and CH4 emissions has progressed significantly over recent decades, large uncertainties still exist when estimating CH4 emissions: there is little consensus on model structure or complexity due to knowledge gaps, different aims of the models, and the range of temporal and spatial

  17. Present state of global wetland extent and wetland methane modelling: methodology of a model inter-comparison project (WETCHIMP

    Directory of Open Access Journals (Sweden)

    R. Wania

    2013-05-01

    Full Text Available The Wetland and Wetland CH4 Intercomparison of Models Project (WETCHIMP was created to evaluate our present ability to simulate large-scale wetland characteristics and corresponding methane (CH4 emissions. A multi-model comparison is essential to evaluate the key uncertainties in the mechanisms and parameters leading to methane emissions. Ten modelling groups joined WETCHIMP to run eight global and two regional models with a common experimental protocol using the same climate and atmospheric carbon dioxide (CO2 forcing datasets. We reported the main conclusions from the intercomparison effort in a companion paper (Melton et al., 2013. Here we provide technical details for the six experiments, which included an equilibrium, a transient, and an optimized run plus three sensitivity experiments (temperature, precipitation, and atmospheric CO2 concentration. The diversity of approaches used by the models is summarized through a series of conceptual figures, and is used to evaluate the wide range of wetland extent and CH4 fluxes predicted by the models in the equilibrium run. We discuss relationships among the various approaches and patterns in consistencies of these model predictions. Within this group of models, there are three broad classes of methods used to estimate wetland extent: prescribed based on wetland distribution maps, prognostic relationships between hydrological states based on satellite observations, and explicit hydrological mass balances. A larger variety of approaches was used to estimate the net CH4 fluxes from wetland systems. Even though modelling of wetland extent and CH4 emissions has progressed significantly over recent decades, large uncertainties still exist when estimating CH4 emissions: there is little consensus on model structure or complexity due to knowledge gaps, different aims of the models, and the range of temporal and spatial resolutions of the models.

  18. Electrochemical apparatus comprising modified disposable rectangular cuvette

    Science.gov (United States)

    Dattelbaum, Andrew M; Gupta, Gautam; Morris, David E

    2013-09-10

    Electrochemical apparatus includes a disposable rectangular cuvette modified with at least one hole through a side and/or the bottom. Apparatus may include more than one cuvette, which in practice is a disposable rectangular glass or plastic cuvette modified by drilling the hole(s) through. The apparatus include two plates and some means of fastening one plate to the other. The apparatus may be interfaced with a fiber optic or microscope objective, and a spectrometer for spectroscopic studies. The apparatus are suitable for a variety of electrochemical experiments, including surface electrochemistry, bulk electrolysis, and flow cell experiments.

  19. Methods and apparatus for determining cardiac output

    Science.gov (United States)

    Cohen, Richard J. (Inventor); Mukkamala, Ramakrishna (Inventor); Sherman, Derin A. (Inventor)

    2010-01-01

    The present invention provides methods and apparatus for determining a dynamical property of the systemic or pulmonary arterial tree using long time scale information, i.e., information obtained from measurements over time scales greater than a single cardiac cycle. In one aspect, the invention provides a method and apparatus for monitoring cardiac output (CO) from a single blood pressure signal measurement obtained at any site in the systemic or pulmonary arterial tree or from any related measurement including, for example, fingertip photoplethysmography.According to the method the time constant of the arterial tree, defined to be the product of the total peripheral resistance (TPR) and the nearly constant arterial compliance, is determined by analyzing the long time scale variations (greater than a single cardiac cycle) in any of these blood pressure signals. Then, according to Ohm's law, a value proportional to CO may be determined from the ratio of the blood pressure signal to the estimated time constant. The proportional CO values derived from this method may be calibrated to absolute CO, if desired, with a single, absolute measure of CO (e.g., thermodilution). The present invention may be applied to invasive radial arterial blood pressure or pulmonary arterial blood pressure signals which are routinely measured in intensive care units and surgical suites or to noninvasively measured peripheral arterial blood pressure signals or related noninvasively measured signals in order to facilitate the clinical monitoring of CO as well as TPR.

  20. Laboratory apparatus to evaluate microalgae production

    Directory of Open Access Journals (Sweden)

    L. R. S. Gris

    2013-09-01

    Full Text Available The application of microalgae for energy purposes and CO2 biomitigation continues to present a number of challenges, including the optimization of culture conditions. The application of experimental designs for microalgae cultivation is difficult, since experiments involving such microorganisms generally last days or weeks. This work proposes a multipurpose laboratory apparatus for the optimization of microalgae experimental conditions that simultaneously enables the evaluation of variables such as temperature, irradiance, photoperiod and CO2 concentration in the aeration stream, as well as variables related to the concentration of culture media nutrients. A case study is also presented in which temperature, concentration of f/2 medium sodium nitrate and the effects of incident light intensity on Nannochloropsis oculata lipid content are evaluated. Experiments were carried out following central composite designs, in batch cultivation within an airlift photobioreactor apparatus. The best experimental result was obtained at 21 ºC, 119 mg/L NaNO3 and 137 µE.m-2.s-1, corresponding to 41.8% lipids and 211.9 mg.L-1 final lipid concentrations.

  1. X-Ray Diffraction Apparatus

    Science.gov (United States)

    Blake, David F. (Inventor); Bryson, Charles (Inventor); Freund, Friedmann (Inventor)

    1996-01-01

    An x-ray diffraction apparatus for use in analyzing the x-ray diffraction pattern of a sample is introduced. The apparatus includes a beam source for generating a collimated x-ray beam having one or more discrete x-ray energies, a holder for holding the sample to be analyzed in the path of the beam, and a charge-coupled device having an array of pixels for detecting, in one or more selected photon energy ranges, x-ray diffraction photons produced by irradiating such a sample with said beam. The CCD is coupled to an output unit which receives input information relating to the energies of photons striking each pixel in the CCD, and constructs the diffraction pattern of photons within a selected energy range striking the CCD.

  2. Synthesis gas method and apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, Sean M.; Kromer, Brian R.; Litwin, Michael M.; Rosen, Lee J.; Christie, Gervase Maxwell; Wilson, Jamie; Kosowski, Lawrence W; Robinson, Charles

    2015-11-06

    A method and apparatus for producing a synthesis gas product having one or more oxygen transport membrane elements thermally coupled to one or more catalytic reactors such that heat generated from the oxygen transport membrane element supplies endothermic heating requirements for steam methane reforming reactions occurring within the catalytic reactor through radiation and convention heat transfer. A hydrogen containing stream containing no more than 20 percent methane is combusted within the oxygen transport membrane element to produce the heat and a heated combustion product stream. The heated combustion product stream is combined with a reactant stream to form a combined stream that is subjected to the reforming within the catalytic reactor. The apparatus may include modules in which tubular membrane elements surround a central reactor tube.

  3. Electromechanical Apparatus Measures Residual Stress

    Science.gov (United States)

    Chern, Engmin J.; Flom, Yury

    1993-01-01

    Nondestructive test exploits relationship between stress and eddy-current-probe resistance. Yields data on residual stress or strain in metal tension/compression specimen (stress or strain remaining in specimen when no stress applied from without). Apparatus is assembly of commercial equipment: tension-or-compression testing machine, eddy-current probe, impedance gain-and-phase analyzer measuring impedance of probe coil, and desktop computer, which controls other equipment and processes data received from impedance gain-and-phase analyzer.

  4. Microwave sterilization method and apparatus

    OpenAIRE

    V. N. Vasilenko; Minuhin, V. V.; Podorozhnyak, A. A.; Trubaev, S. I.

    1995-01-01

    Experience of industrially developed countries in utilization of microwave radiation has been analyzed. Apparatus for realization of microwave method of sterilization has been designed. A number of experiments for the estimation of bactericidal, sporacidal, and virusidal properties of microwave radiation action has been carried out in 3 to 13 cm wavelength band. B. Lycheniform shtumm G., B. Subtilis ATTC 6633, E. Coli ATTC 25922 and bacterial virus FX 174 were used as test microbes. Effect of...

  5. Thermoplastic welding apparatus and method

    Energy Technology Data Exchange (ETDEWEB)

    Matsen, Marc R.; Negley, Mark A.; Geren, William Preston; Miller, Robert James

    2017-03-07

    A thermoplastic welding apparatus includes a thermoplastic welding tool, at least one tooling surface in the thermoplastic welding tool, a magnetic induction coil in the thermoplastic welding tool and generally encircling the at least one tooling surface and at least one smart susceptor in the thermoplastic welding tool at the at least one tooling surface. The magnetic induction coil is adapted to generate a magnetic flux field oriented generally parallel to a plane of the at least one smart susceptor.

  6. Key point in dermoscopic differentiation between early nail apparatus melanoma and benign longitudinal melanonychia

    OpenAIRE

    Koga, Hiroshi; Saida, Toshiaki; Uhara, Hisashi

    2011-01-01

    Longitudinal melanonychia presents in various conditions including neoplastic and reactive disorders. It is much more frequently seen in non-Caucasians than Caucasians. While most cases of nail apparatus melanoma start as longitudinal melanonychia, melanocytic nevi of the nail apparatus also typically accompany longitudinal melanonychia. Identifying the suspicious longitudinal melanonychia is therefore an important task for dermatologists. Dermoscopy provides useful information for making thi...

  7. Filtering apparatus and method for mixing, extraction and/or separation

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention relates to a filtering apparatus and method for mixing a compound of solid and fluid phases, separating the phases and/or extracting fluid from the compound. One embodiment of the invention discloses a filtering apparatus comprising a first filter section accommodating a fir...... in a beer brewing procedure....

  8. Early 20th century acoustics apparatus in Iowa

    Science.gov (United States)

    Hanson, Roger J.

    2001-05-01

    In the first half of the 20th century G. W. Stewart was a physics faculty member at the University of Iowa (UI) with a distinguished record of research and teaching, especially in acoustics. Much of his research focused on the design and use of several types of acoustical filters. Some apparatus which he developed or utilized are still housed in the Department of Physics and Astronomy or are available in detailed diagrams. Demonstration apparatus (apparently homemade) from his era are still available for use. Carl E. Seashore, a renowned psychologist also at UI in the early 20th century, had interdisciplinary interests linking psychology, speech and hearing, music, and acoustics. He was responsible for obtaining an Henrici harmonic analyzer, a mechanical Fourier analyzer manufactured in Switzerland, a special grant from the state legislature during Depression conditions provided the funding. It resides in the Department of Speech Pathology and Audiology at UI. The Grinnell College Physics Historical Museum houses a set of 18 Helmholtz resonators and a Savart bell and resonator. Apparatus at Iowa State University, the University of Northern Iowa, and other Iowa institutions will also be described. Pictures and diagrams as well as some actual apparatus will be exhibited.

  9. Fiber Pulling Apparatus

    Science.gov (United States)

    Workman, Gary L.; Smith, Guy A.; OBrien, Sue; Adcock, Leonard

    1998-01-01

    than 50% of the total budget each year through 1998. A newly emerging activity is the commercial development of doped optical fibers which can be pumped by laser diodes to provide amplification of the communication signals. This technology is newly emerging and will be developed for commercial interests in the United States by Galileo Electro-optical Incorporated in Sturbridge, MA on a license from British Telecom. Long repeaterless communication links provide the biggest stimulus for this technology. As an example of the of the revenues involved in the optical fiber communications 3 industry, the current trade journal lists that for the fiscal years, 1991 - 1994, 185 separate undersea links were established. In addition, another 105 links are planned through 1998. The distribution of revenues involved in the undersea installations is roughly $8.5 billion through 1993 and another $13 billion planned through 1998. A large portion of the future activity (34%) is planned for Southeast Asia and the Pacific Region. Other examples of the commercial utility of optical fiber networks is given in a recent scientific symposium in which the outlook for HMFG infrared fiber was determined to be very bright.Another area of interest lies in the use of fiber optics for laser surgery delivery systems.

  10. Liga developer apparatus system

    Science.gov (United States)

    Boehme, Dale R.; Bankert, Michelle A.; Christenson, Todd R.

    2003-01-01

    A system to fabricate precise, high aspect ratio polymeric molds by photolithograpic process is described. The molds for producing micro-scale parts from engineering materials by the LIGA process. The invention is a developer system for developing a PMMA photoresist having exposed patterns comprising features having both very small sizes, and very high aspect ratios. The developer system of the present invention comprises a developer tank, an intermediate rinse tank and a final rinse tank, each tank having a source of high frequency sonic agitation, temperature control, and continuous filtration. It has been found that by moving a patterned wafer, through a specific sequence of developer/rinse solutions, where an intermediate rinse solution completes development of those portions of the exposed resist left undeveloped after the development solution, by agitating the solutions with a source of high frequency sonic vibration, and by adjusting and closely controlling the temperatures and continuously filtering and recirculating these solutions, it is possible to maintain the kinetic dissolution of the exposed PMMA polymer as the rate limiting step.

  11. Present state of global wetland extent and wetland methane modelling: conclusions from a model intercomparison project (WETCHIMP

    Directory of Open Access Journals (Sweden)

    J. R. Melton

    2012-08-01

    Full Text Available Global wetlands are believed to be climate sensitive, and are the largest natural emitters of methane (CH4. Increased wetland CH4 emissions could act as a positive feedback to future warming. The Wetland and Wetland CH4 Inter-comparison of Models Project (WETCHIMP investigated our present ability to simulate large scale wetland characteristics and corresponding CH4 emissions. To ensure inter-comparability, we used a common experimental protocol driving all models with the same climate and carbon dioxide (CO2 forcing datasets. The WETCHIMP experiments were conducted for model equilibrium states as well as transient simulations covering the last century. Sensitivity experiments investigated model response to changes in selected forcing inputs (precipitation, temperature, and atmospheric CO2 concentration. Ten models participated, covering the spectrum from simple to relatively complex, including models tailored either for regional or global simulations. The models also varied in methods to calculate wetland size and location with some models simulating wetland area prognostically, while other models relied on remotely-sensed inundation datasets, or an approach intermediate between the two.

    Four major conclusions emerged from the project. First, the suite of models demonstrate extensive disagreement in their simulations of wetland areal extent and CH4 emissions, in both space and time. Simple metrics of wetland area, such as the latitudinal gradient, show large variability, principally between models that use inundation dataset information and those that independently determine wetland area. Agreement between the models improves for zonally summed CH4 emissions, but large variation between the models remains. For annual global CH4 emissions, the models vary by ±40 % of the all model mean (190 Tg CH4 yr−1. Second, all

  12. Present state of global wetland extent and wetland methane modelling: conclusions from a model inter-comparison project (WETCHIMP

    Directory of Open Access Journals (Sweden)

    J. R. Melton

    2013-02-01

    Full Text Available Global wetlands are believed to be climate sensitive, and are the largest natural emitters of methane (CH4. Increased wetland CH4 emissions could act as a positive feedback to future warming. The Wetland and Wetland CH4 Inter-comparison of Models Project (WETCHIMP investigated our present ability to simulate large-scale wetland characteristics and corresponding CH4 emissions. To ensure inter-comparability, we used a common experimental protocol driving all models with the same climate and carbon dioxide (CO2 forcing datasets. The WETCHIMP experiments were conducted for model equilibrium states as well as transient simulations covering the last century. Sensitivity experiments investigated model response to changes in selected forcing inputs (precipitation, temperature, and atmospheric CO2 concentration. Ten models participated, covering the spectrum from simple to relatively complex, including models tailored either for regional or global simulations. The models also varied in methods to calculate wetland size and location, with some models simulating wetland area prognostically, while other models relied on remotely sensed inundation datasets, or an approach intermediate between the two.

    Four major conclusions emerged from the project. First, the suite of models demonstrate extensive disagreement in their simulations of wetland areal extent and CH4 emissions, in both space and time. Simple metrics of wetland area, such as the latitudinal gradient, show large variability, principally between models that use inundation dataset information and those that independently determine wetland area. Agreement between the models improves for zonally summed CH4 emissions, but large variation between the models remains. For annual global CH4 emissions, the models vary by ±40% of the all-model mean (190 Tg CH4 yr−1. Second, all

  13. Apparatus comprising magnetically actuated valves and uses thereof

    Science.gov (United States)

    Edwards, Thayne L.; Harper, Jason C.

    2016-07-12

    The present invention, in part, relates to an apparatus having a single-use, normally-closed fluidic valve that is initially maintained in the closed position by a valve element bonded to an adhesive coating. The valve is opened using a magnetic force. The valve element includes a magnetic material or metal. In some examples, the valve is opened by bringing a magnet in proximity to the valve element to provide a magnetic force that delaminates the valve element from the adhesive coating. In particular, the apparatus can be useful for on-chip amplification and/or detection of various targets, including biological targets and any amplifiable targets. Such apparatuses and methods are useful for in-field or real-time detection of targets, especially in limited resource settings.

  14. Apparatuses And Systems For Embedded Thermoelectric Generators

    KAUST Repository

    Hussain, Muhammad M.

    2013-08-08

    An apparatus and a system for embedded thermoelectric generators are disclosed. In one embodiment, the apparatus is embedded in an interface where the ambient temperatures on two sides of the interface are different. In one embodiment, the apparatus is fabricated with the interface in integrity as a unitary piece. In one embodiment, the apparatus includes a first thermoelectric material embedded through the interface. The apparatus further includes a second thermoelectric material embedded through the interface. The first thermoelectric material is electrically coupled to the second thermoelectric material. In one embodiment, the apparatus further includes an output structure coupled to the first thermoelectric material and the second thermoelectric material and configured to output a voltage.

  15. Proof-of-principle test of coherent-state continuous variable quantum key distribution through turbulent atmosphere (Conference Presentation)

    Science.gov (United States)

    Derkach, Ivan D.; Peuntinger, Christian; Ruppert, László; Heim, Bettina; Gunthner, Kevin; Usenko, Vladyslav C.; Elser, Dominique; Marquardt, Christoph; Filip, Radim; Leuchs, Gerd

    2016-10-01

    Continuous-variable quantum key distribution is a practical application of quantum information theory that is aimed at generation of secret cryptographic key between two remote trusted parties and that uses multi-photon quantum states as carriers of key bits. Remote parties share the secret key via a quantum channel, that presumably is under control of of an eavesdropper, and which properties must be taken into account in the security analysis. Well-studied fiber-optical quantum channels commonly possess stable transmittance and low noise levels, while free-space channels represent a simpler, less demanding and more flexible alternative, but suffer from atmospheric effects such as turbulence that in particular causes a non-uniform transmittance distribution referred to as fading. Nonetheless free-space channels, providing an unobstructed line-of-sight, are more apt for short, mid-range and potentially long-range (using satellites) communication and will play an important role in the future development and implementation of QKD networks. It was previously theoretically shown that coherent-state CV QKD should be in principle possible to implement over a free-space fading channel, but strong transmittance fluctuations result in the significant modulation-dependent channel excess noise. In this regime the post-selection of highly transmitting sub-channels may be needed, which can even restore the security of the protocol in the strongly turbulent channels. We now report the first proof-of-principle experimental test of coherent state CV QKD protocol using different levels Gaussian modulation over a mid-range (1.6-kilometer long) free-space atmospheric quantum channel. The transmittance of the link was characterized using intensity measurements for the reference but channel estimation using the modulated coherent states was also studied. We consider security against Gaussian collective attacks, that were shown to be optimal against CV QKD protocols . We assumed a

  16. Cluster Implantation and Deposition Apparatus

    DEFF Research Database (Denmark)

    Hanif, Muhammad; Popok, Vladimir

    2015-01-01

    In the current report, a design and capabilities of a cluster implantation and deposition apparatus (CIDA) involving two different cluster sources are described. The clusters produced from gas precursors (Ar, N etc.) by PuCluS-2 can be used to study cluster ion implantation in order to develop...... contributions to the theory of cluster stopping in matter as well as for practical applications requiring ultra-shallow implantation and modification of surfaces on the nanoscale. Metal clusters from the magnetron cluster source are of interest for the production of optical sensors to detect specific biological...

  17. Analysis of Ukrainian legislation on state anti-corruption policy at the present stage of the reform

    Directory of Open Access Journals (Sweden)

    Liliia Bakunchyk

    2015-11-01

    Full Text Available In this article the state of implementation of anti-corruption policy in Ukraine has been analyzed. The basic legal and regulatory backgrounds of the country’s anti-corruption activities are examined. Based on analysis of the ways of improving the state anticorruption policy, improve the efficiency of its practical implementation in Ukraine. Corruption remains a major problem in Ukraine and continues to threaten its economic development, political stability, reputation (confidence level of the public authorities. Analyzing the phenomenon of corruption, it is necessary to emphasize that corruption is reformed in a reliable instrument to implement or achieve certain goals not only in individual format, but like leverage in the form of inter-state relations. This article shows the Ukraine’s achievement in the field of development the legislating basis for anticorruption policy, the practical instruments of its implementation on the institutional level. Steps made by the new elected authority involving publicity in order to improve the transparency and integrity building are reviewed as well as main tasks of the country to combat the corruption and the recommendations for its capability development. Combating corruption, our country has made considerable progress through the adoption of the anti-corruption legislation. It also covers reform of relevant government institutions that are unconditional guarantee of performance and implementing the rules. Many changes occurred and continue to occur with the support and under the close supervision of the foreign community, as well as a number of international organizations and institutions. At the same time, while preparing this materiel the influence of the international lessons learned experience had been taking in to consideration, which found its reflection and was actively implemented in the creating of anticorruption programs of governmental establishments as well as in Ministry of Defence.

  18. Etiology in pediatric patient presented to emergency department with altered state of consciousness: Is it trauma or not?

    Directory of Open Access Journals (Sweden)

    Şimşek ÇELİK

    2017-03-01

    Full Text Available Consciousness is the state of ability of a person to perceive himself/herself and environment and to give an appropriate response to stimuli. The most frequent causes of childhood consciousness change include electrolyte disorders, encephalopathy, infections, overdose, intoxication, uremia, trauma, seizures, stroke, hypo-hyperglycaemia. Hypoglycemia is a very common metabolic problem in children. Our aim is to make sure that the diagnosis of hypoglycemia, one of the most common causes of consciousness change in children, is kept in mind and considered in differential diagnosis.

  19. Lateral Ignition and Flame Spread Apparatus

    Data.gov (United States)

    Federal Laboratory Consortium — Description: This apparatus, developed at EL, determines material properties related to piloted ignition of a vertically oriented sample under constant and uniform...

  20. Development of a Compact Snow Crystal Formation Apparatus Based on a Diffusion Method Using a Peltier Device

    Science.gov (United States)

    Kojima, Shinsuke; Endo, Hiroshi; Seki, Mitsuo

    We developed a compact snow crystal formation apparatus based on a diffusion method using a Peltier device. This apparatus does not need an assemblage and is small enough to be operated on a desk. Anyone can easily observe snow crystal formation in a normal temperature room. We adopted a diffusion method because the shape enable that several people can simultaneously observe the snow crystal formation from above. To estimate a performance of the apparatus, we investigated temperature profiles in the apparatus by measurement and simulations with (Case 1) and without (Case 2) natural convection. As results of the simulations, Case 1 and Case 2 reached a steady state. In each case, temperature stratification condition was formed in lower part of the apparatus. From the comparison of the results of measurement and simulations, finally, it is concluded that there is a natural convection, but the air current is not so strong as disturbing the temperature stratification condition in the apparatus.

  1. Clinical presentation, pathophysiology, diagnosis, and treatment of acquired and hereditary angioedema: Exploring state-of-the-art therapies in RI.

    Science.gov (United States)

    Guo, Canting; Settipane, Russell A

    2016-06-01

    Hereditary and acquired angioedema are potentially life-threatening diseases characterized by spontaneous episodes of subcutaneous and submucosal swelling of face, lips, oral cavity, larynx, and GI tract. Hereditary angioedema (HAE) usually presents within the first and second decades of life, whereas acquired angioedema presents in adults after 40 years of age. These clinical symptoms together with reduced C1 inhibitor levels and/or activity can usually confirm the diagnosis. In recent years, multiple novel therapies for treating hereditary angioedema have emerged including C1 inhibitor concentrates, ecallantide/kallikrein inhibitor, and icatibant/bradykinin receptor antagonist. This article reviews the clinical presentation, diagnosis, treatment, and prophylaxis of HAE. Lastly, this article takes into consideration that, in reality, acute care treatment can often be limited by each hospital's formulary, included is a review of HAE treatments available at the nine major hospitals in Rhode Island. [Full article available at http://rimed.org/rimedicaljournal-2016-06.asp, free with no login].

  2. Tube wall thickness measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Lagasse, P.R.

    1985-06-21

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and radius by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  3. Tube wall thickness measurement apparatus

    Science.gov (United States)

    Lagasse, P.R.

    1985-06-21

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and radius by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  4. Tube wall thickness measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Lagasse, Paul R. (Santa Fe, NM)

    1987-01-01

    An apparatus for measuring the thickness of a tube's wall for the tube's entire length and circumference by determining the deviation of the tube wall thickness from the known thickness of a selected standard item. The apparatus comprises a base and a first support member having first and second ends. The first end is connected to the base and the second end is connected to a spherical element. A second support member is connected to the base and spaced apart from the first support member. A positioning element is connected to and movable relative to the second support member. An indicator is connected to the positioning element and is movable to a location proximate the spherical element. The indicator includes a contact ball for first contacting the selected standard item and holding it against the spherical element. The contact ball then contacts the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item.

  5. Master-slave micromanipulator apparatus

    Science.gov (United States)

    Morimoto, Alan K.; Kozlowski, David M.; Charles, Steven T.; Spalding, James A.

    1999-01-01

    An apparatus based on precision X-Y stages that are stacked. Attached to arms projecting from each X-Y stage are a set of two axis gimbals. Attached to the gimbals is a rod, which provides motion along the axis of the rod and rotation around its axis. A dual-planar apparatus that provides six degrees of freedom of motion precise to within microns of motion. Precision linear stages along with precision linear motors, encoders, and controls provide a robotics system. The motors can be positioned in a remote location by incorporating a set of bellows on the motors and can be connected through a computer controller that will allow one to be a master and the other one to be a slave. Position information from the master can be used to control the slave. Forces of interaction of the slave with its environment can be reflected back to the motor control of the master to provide a sense of force sensed by the slave. Forces import onto the master by the operator can be fed back into the control of the slave to reduce the forces required to move it.

  6. Apparatus for incinerating hazardous waste

    Science.gov (United States)

    Chang, R.C.W.

    1994-12-20

    An apparatus is described for incinerating wastes, including an incinerator having a combustion chamber, a fluid-tight shell enclosing the combustion chamber, an afterburner, an off-gas particulate removal system and an emergency off-gas cooling system. The region between the inner surface of the shell and the outer surface of the combustion chamber forms a cavity. Air is supplied to the cavity and heated as it passes over the outer surface of the combustion chamber. Heated air is drawn from the cavity and mixed with fuel for input into the combustion chamber. The pressure in the cavity is maintained at least approximately 2.5 cm WC higher than the pressure in the combustion chamber. Gases cannot leak from the combustion chamber since the pressure outside the chamber (inside the cavity) is higher than the pressure inside the chamber. The apparatus can be used to treat any combustible wastes, including biological wastes, toxic materials, low level radioactive wastes, and mixed hazardous and low level transuranic wastes. 1 figure.

  7. Method and apparatus for synthesizing hydrocarbons

    Science.gov (United States)

    Colmenares, C.A.; Somorjai, G.A.; Maj, J.J.

    1985-04-16

    A method and apparatus for synthesizing a mixture of aliphatic alcohols having five carbons or less is disclosed. An equal molar ratio of CO and H/sub 2/ gases is caused to pass through a ThO/sub 2/ catalyst having a surface area of about 80 to 125 m/sup 2//g. The catalyst further optionally includes Na ions present as substitutional cations in an amount of about 5 to 10 atom %. At a temperature of about 570 to 630/sup 0/K, and at pressures of about 20 to 50 atm, methanol and isobutanol are the predominant products and are produced in amounts of about 90 wt % of the total hydrocarbon mixture. 6 figs.

  8. The Q_weak Experimental Apparatus

    CERN Document Server

    Allison, T; Androic, D; Armstrong, D S; Asaturyan, A; Averett, T D; Averill, R; Balewski, J; Beaufait, J; Beminiwattha, R S; Benesch, J; Benmokhtar, F; Bessuille, J; Birchall, J; Bonnell, E; Bowman, J; Brindza, P; Brown, D B; Carlini, R D; Cates, G D; Cavness, B; Clark, G; Cornejo, J C; Dusa, S Covrig; Dalton, M M; Davis, C A; Dean, D C; Deconinck, W; Diefenbach, J; Dow, K; Dowd, J F; Dunne, J A; Dutta, D; Duvall, W S; Echols, J R; Elaasar, M; Falk, W R; Finelli, K D; Finn, J M; Gaskell, D; Gericke, M T W; Grames, J; Gray, V M; Grimm, K; Guo, F; Hansknecht, J; Harrison, D J; Henderson, E; Hoskins, J R; Ihloff, E; Johnston, K; Jones, D; Jones, M; Jones, R; Kargiantoulakis, M; Kelsey, J; Khan, N; King, P M; Korkmaz, E; Kowalski, S; Kubera, A; Leacock, J; Leckey, J P; Lee, A R; Lee, J H; Lee, L; Liang, Y; MacEwan, S; Mack, D; Magee, J A; Mahurin, R; Mammei, J; Martin, J W; McCreary, A; McDonald, M H; McHugh, M J; Medeiros, P; Meekins, D; Mei, J; Michaels, R; Micherdzinska, A; Mkrtchyan, A; Mkrtchyan, H; Morgan, N; Musson, J; Mesick, K E; Narayan, A; Ndukum, L Z; Nelyubin, V; Nuruzzaman,; van Oers, W T H; Opper, A K; Page, S A; Pan, J; Paschke, K D; Phillips, S K; Pitt, M L; Poelker, M; Rajotte, J F; Ramsay, W D; Roberts, W R; Roche, J; Rose, P W; Sawatzky, B; Seva, T; Shabestari, M H; Silwal, R; Simicevic, N; Smith, G R; Sobczynski, S; Solvignon, P; Spayde, D T; Stokes, B; Storey, D W; Subedi, A; Subedi, R; Suleiman, R; Tadevosyan, V; Tobias, W A; Tvaskis, V; Urban, E; Waidyawansa, B; Wang, P; Wells, S P; Wood, S A; Yang, S; Zhamkochyan, S; Zielinski, R B

    2014-01-01

    The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\\vec{e}}$p asymmetry ever measured. Technical milestones were achieved at Jefferson Lab in target power, beam current, beam helicity reversal rate, polarimetry, detected rates, and control of helicity-correlated beam properties. The experiment employed 180 microA of 89% longitudinally polarized electrons whose helicity was reversed 960 times per second. The electrons were accelerated to 1.16 GeV and directed to a beamline with extensive instrumentation to measure helicity-correlated beam properties that can induce false asymmetries. Moller and Compton polarimetry were used to measure the electron beam polarization to better than 1%. The ...

  9. DNA hypermethylation biomarkers to predict response to cisplatin treatment, radiotherapy or chemoradiation : the present state of art

    NARCIS (Netherlands)

    Roossink, Frank; de Jong, Steven; Wisman, G Bea A; van der Zee, Ate G J; Schuuring, Ed

    2012-01-01

    BACKGROUND: Concurrent platinum-based chemoradiation significantly improved survival of advanced stage cervical patients over radiotherapy alone. However, the 5-year overall survival is still only 66%. Presently, no biomarkers are available to select those cervical cancer patients that might benefit

  10. The integrated reporting: A presentation of the current state of art and aspects of integrated reporting that need further development

    OpenAIRE

    Jordi Morros

    2016-01-01

    Purpose: The purpose of this paper is to synthesise what is the emerging field of integrated reporting, with particular emphasis in the International Integrated Reporting Council, and outline a list of items for future research in this area. Design/methodology/approach: The approach is to outline a presentation of integrated reporting (IR), and make a review of the implications for the research agenda of the most important items. Findings: The need for quality researchers to address a number ...

  11. Dressed in a Present from the Past The Transfers and Transformations of a Swedish Bridal Crown in the United States

    Directory of Open Access Journals (Sweden)

    Lizette Gradén

    2010-12-01

    Full Text Available Ever since the emigration from the Nordic countries the Old world and the New world have maintained an exchange of ideas, customs, and material culture. This cultural heritage consists of more than remnants of the past. Drawing on theories of material culture and performance this article highlights the role of gifts in mate-rializing relationships between individuals, families and organizations in the wake of migration. First, I build on a suggested coinage of the term heritage gifts as a way of materializing relationships. Thereafter, I map out the numerous roles which a Swedish bridal crown play in the United States: as museum object, object of display and loaned to families for wedding ceremonies in America. The trans-fers and transformations of the bridal crown enhances a drama of a migration her-itage. This dynamic drama brings together kin in Sweden and America and maps specific locations into a flexible space via the trajectory of crown-clad female bodies.

  12. The present-day state and outlooks of using plasma-energy technologies in heat power industry

    Energy Technology Data Exchange (ETDEWEB)

    Karpenko, E.; Messerle, V.; Buyantuev, S. [J.S. Co. `Gusinoozyorsk SDPS`, Gusinoozyorsk (Russian Federation)

    1997-12-31

    The urgency of using plasma-energy technologies in the power industry is outlined with the aim of increasing economical efficiency, decreasing of energy consumption and decreasing environmental pollution. Scientific and technical bases for plasma-energy technologies of fuel utilization, are presented, with results of theoretical, experimental and rig investigations of processes of plasma ignition, gasification, thermochemical preparation for burning and combined processing of coals. Results of realization of plasma technologies of residual-oil-free (mazout) pulverized coal boiler kindling, lighting of torch and stabilization of fluid slagging in furnaces with removal of fluid slag, are described. 6 refs.,1 fig., 2 tabs.

  13. Apparatus Named after Our Academic Ancestors, III

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    2014-01-01

    My academic ancestors in physics have called on me once more to tell you about the apparatus that they devised, and that many of you have used in your demonstrations and labs. This article is about apparatus named after François Arago, Heinrich Helmholtz, Leon Foucault, and James Watt.

  14. Apparatus Named After Our Academic Ancestors, III

    Science.gov (United States)

    Greenslade, Thomas B.

    2014-09-01

    My academic ancestors in physics have called on me once more to tell you about the apparatus that they devised, and that many of you have used in your demonstrations and labs. This article is about apparatus named after François Arago, Heinrich Helmholtz, Leon Foucault, and James Watt.

  15. On an Actual Apparatus for Conceptual Change.

    Science.gov (United States)

    Macbeth, Douglas

    2000-01-01

    Organizes a reading of the conceptual change literature that brings into view a collection of design specifications for a conceptual change apparatus. Analyzes one such apparatus in the particulars of a science education demonstration program produced by the Harvard-Smithsonian Private Universe Project. (Contains 114 references.) (Author/WRM)

  16. Field-effect modulation of the local density of optical states in a reflectarray metasurface (Conference Presentation)

    Science.gov (United States)

    Kafaie Shirmanesh, Ghazaleh; Sokhoyan, Ruzan; Han, Seunghoon; Atwater, Harry A.

    2016-09-01

    During recent years, advances in the design of arrays of subwavelength optical elements with special electromagnetic properties have enabled quasi two-dimensional structures that control and manipulate electromagnetic phase, amplitude and polarization. Active control of the response of metasurfaces is possible using transparent conducting oxides such as Indium Tin Oxide (ITO) as a tunable active material [1]. Changing the complex permittivity of ITO by applying a voltage yields modulation of reflected wave phase and amplitude. To achieve this, we designed subwavelength antenna arrays consisting of a gold back reflector and gold fishbone antennas. Planar dielectric layers containing a gate tunable layer of ITO are sandwiched between the back reflector and the antenna. The obtained structure shows resonance around 1.5 µm. As a result, based on the 1.54 µm photoluminescence emission of Er doped Al2O3 films, we embedded trivalent erbium ions as quantum emitters inside an alumina host within the metasurface in order to enhance the local density of optical states (LDOS). Simulations indicate the designed structure shows a significant LDOS enhancement (of order of hundreds). By applying a bias between the antenna and the ITO layer, across an HfO2 gate dielectric, we can control the permittivity of ITO and hence dynamically modulate the decay rate of quantum emitters embedded within the structure. In this way, we can achieve LDOS enhancement modulation of about 325%. 1. Y. W Huang, H. W. H. Lee, R. Sokhoyan, R. Pala, K. Thyagarajan, S. Han, D. P. Tsai, H. A. Atwater, "Gate-tunable conducting oxide metasurfaces". (arXiv:1511.09380).

  17. Past, Present, and Future Old Growth in Frequent-fire Conifer Forests of the Western United States

    Directory of Open Access Journals (Sweden)

    Scott R. Abella

    2007-12-01

    Full Text Available Old growth in the frequent-fire conifer forests of the western United States, such as those containing ponderosa pine (Pinus ponderosa, Jeffrey pine (P. jeffreyi, giant sequoia (Sequioa giganteum and other species, has undergone major changes since Euro-American settlement. Understanding past changes and anticipating future changes under different potential management scenarios are fundamental to developing ecologically based fuel reduction or ecological restoration treatments. Some of the many changes that have occurred in these forests include shifts from historically frequent surface fire to no fire or to stand-replacing fire regimes, increases in tree density, increased abundance of fire-intolerant trees, decreases in understory productivity, hydrological alterations, and accelerated mortality of old trees. Although these changes are widespread, the magnitude and causes of changes may vary within and among landscapes. Agents of change, such as fire exclusion or livestock grazing, likely interacted and had multiple effects. For example, historical ranching operations may have altered both fire regimes and understory vegetation, and facilitated institutional fire exclusion through fragmentation and settlement. Evidence exists for large variation in presettlement characteristics and current condition of old growth across this broad forest region, although there are many examples of striking similarities on widely distant landscapes. Exotic species, climate change, unnatural stand-replacing wildfires, and other factors will likely continue to degrade or eradicate old growth in many areas. As a policy of fire exclusion is proving to be unsustainable, mechanical tree thinning, prescribed fire, or wildland fire use will likely be key options for forestalling continued eradication of old growth by severe crown fires. For many practical and societal reasons, the wildland-urban interface may afford some of the most immediate opportunities for re

  18. EXPERIMENTAL APPARATUS FOR EXAMINATION OF MAGNETIC FLUID LUBRICATED THURST BEARING

    Directory of Open Access Journals (Sweden)

    Józef SALWIŃSKI

    2014-06-01

    Full Text Available In recent years, there has been development of the structure of thrust bearing with magnetic fluids . The essence of this type of bearing is to maintain a liquid lubricant in a very narrow gap with magnetic fluid by a magnetic field. Such systems can act as the bearing lubrication and sealing. This paper presents description of the experimental apparatus for examination magnetic fluid lubricated thrust bearing. Description of the construction and characteristics of the measuring possibilities ware presented.

  19. System, Apparatus and Method Employing a Dual Head Laser

    Science.gov (United States)

    Coyle, Donald B. (Inventor); Stysley, Paul R. (Inventor); Poulios, Demetrios (Inventor)

    2015-01-01

    A system, apparatus and method employing a laser with a split-head, V-assembly gain material configuration. Additionally, the present invention is directed to techniques to better dissipate or remove unwanted energies in laser operations. The present invention is also directed to techniques for better collimated laser beams, with single spatial mode quality (TEM00), with improved efficiency, in extreme environments, such as in outer space.

  20. Present state, basic theories, methods and progresses of investigation and assessment on marine hazardous geology in China

    Institute of Scientific and Technical Information of China (English)

    Li Peiying; Li Ping; Liu Lejun; Du Jun; Zhang Xiaolong; Wang Shengji

    2003-01-01

    The achievement progresses of investigation and studies on marine hazardous geology are summarized and presentsd in the late 20 century in China. The importance, research value and presentday studies of marine hazardous geology, a newly developing branch of geoscience, are well expatiated.Several often confused concepts and theories are explained and redefined here. The comment on the means of investigations, assessment of marine hazardous geology, as well as its evolution, innovation,existing questions and future tasks are also introduced and presented. The concepts of "hazard geology","geohazard", "map of marine hazard geology", "integrated evaluaton on seafloor stablity" are respectively discussed, including their definition, research objects, methods and contents. The types and classification of marine hazardous geology, principles and methods of marine hazardous geology map compilation, the assessment methods and models of marine hazardous geology environment and seafloor stability and so on are also discussed.

  1. APPARATUS FOR LIQUID PHASE EXTRACTION

    Science.gov (United States)

    Hicks, T.R.; Lehman, H.R.; Rubin, B.

    1958-09-16

    operation is described. It comprises a tubular colunm having upper and lower enlarged terminal portions, and a constricted central section containing fluid dispersal packing. Pulsing means are coupled to the upper portion of the column. The inlet for the less dense phase is located above the inlet for the denser phase and both are positioned so that liquids enter the constricted packingfilled central section. The apparatos also includes an interfacing level control, and means fer sensing the level of the interface actuate apparatus for controlling the rate of flow of input or discharge. The outlet for the less dense phase is located in the upper packing free portion of the colunm and that of the denser phase in the lower portion.

  2. Tube wall thickness measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Lagasse, P.R.

    1987-01-06

    An apparatus is described for measuring the thickness of a tube's wall for the tube's entire length and circumference by determining the deviation of the tube wall thickness from the known thickness of a selected standard item, the apparatus comprising: a. a base; b. a first support member having first and second ends, the first end being connected to the base, the first support member having a sufficiently small circumference that the tube can be slid over the first support member; c. a spherical element, the spherical element being connected to the second end of the first support member. The spherical element has a sufficiently small circumference at its equator that the tube can be slid over the spherical element, the spherical element having at its equator a larger circumference than the first support member; d. a second support member having first and second ends, the first end being connected to the base, the second support member being spaced apart form the first support member; e. a positioning element connected to and moveable relative to the second support member; and f. an indicator connected to the positioning element and being moveable thereby to a location proximate the spherical element. The indicator includes a contact ball for contacting the selected standard item and holding it against the spherical element, the contact ball contacting the tube when the tube is disposed about the spherical element. The indicator includes a dial having a rotatable needle for indicating the deviation of the tube wall thickness from the thickness of the selected standard item, the rotatable needle being operatively connected to and responsive to the position of the contact ball.

  3. The history, development and the present status of the radon measurement programme in the United States of America.

    Science.gov (United States)

    George, A C

    2015-11-01

    The US radon measurement programme began in the late 1950s by the US Public Health Service in Colorado, New Mexico and Utah during the uranium frenzy. After the 1967 Congressional Hearings on the working conditions in uranium mines, the US Atomic Energy Commission (AEC) was asked to conduct studies in active uranium mines to assess the exposure of the miners on the Colorado Plateau and in New Mexico. From 1967 to 1972, the Health and Safety Laboratory of the US AEC in New York investigated more than 20 uranium mines for radon and radon decay product concentrations and particle size in 4 large uranium mines in New Mexico. In 1970, the US Environmental Protection Agency (EPA) was established and took over some of the AEC radon measurement activities. Between 1975 and 1978, the Environmental Measurements Laboratory of the US Department of Energy conducted the first detailed indoor radon survey in the USA. Later in 1984, the very high concentrations of radon found in Pennsylvania homes set the wheels in motion and gave birth to the US Radon Industry. The US EPA expanded its involvement in radon issues and assumed an active role by establishing the National Radon Proficiency Program to evaluate the effectiveness of radon measurement and mitigation methods. In 1998, due to limited resources EPA privatised the radon programme. This paper presents a personal perspective of past events and current status of the US radon programme. It will present an update on radon health effects, the incidence rate of lung cancer in the USA and the number of radon measurements made from 1988 to 2013 using short-term test methods. More than 23 million measurements were made in the last 25 y and as a result more than 1.24 million homes were mitigated successfully. It is estimated that radon measurements performed in the USA are made using long-term testing devices. The number of homes above the US action level of 148 Bq m(-3) (4 pCi l(-1)) may be ∼8.5 million because ∼50 million homes

  4. The integrated reporting: A presentation of the current state of art and aspects of integrated reporting that need further development

    Directory of Open Access Journals (Sweden)

    Jordi Morros

    2016-02-01

    Full Text Available Purpose: The purpose of this paper is to synthesise what is the emerging field of integrated reporting, with particular emphasis in the International Integrated Reporting Council, and outline a list of items for future research in this area. Design/methodology/approach: The approach is to outline a presentation of integrated reporting (IR, and make a review of the implications for the research agenda of the most important items. Findings: The need for quality researchers to address a number of pressing challenges posed by the rapid development of IR policies and practices. Research limitations/implications: The paper provide insights into issues and aspects of integrated reporting that need further development and need robust evidence to help inform improvements in policy and practice. Practical implications: Highlight how companies may benefit from integrated reporting in response to stakeholders’ calls for enhanced disclosure of environmental, social, governance and other non financial information. Social implications: The main social implication is to promote the wider public interest of improving the relevance of information for decision-making, for all stakeholders, and allow greater efficiency in the allocation of financial and other resources and in adding public value Originality/value: This paper offers a general view on a subject that is a challenge for entities oriented to the implementation of sustainability in their values and also in their reporting.

  5. Implications of the Golgi apparatus in prostate cancer.

    Science.gov (United States)

    Migita, Toshiro; Inoue, Satoshi

    2012-11-01

    The classical view of the Golgi apparatus is of a small membranous organelle involved in protein transport and secretion. Recent descriptions of the molecular network connecting the Golgi to other organelles demonstrate the essential roles of the Golgi in cellular activities as a stress sensor, apoptosis trigger, lipid/protein modifier, mitotic checkpoint, and a mediator of malignant transformation. Thus, the Golgi function should have a fundamental impact on cancer cell survival. Prostate cancer is initially responsive to androgenic hormones; however, it almost invariably progresses to a castration-refractory or hormone-insensitive state. Nevertheless, androgen signaling remains active at this stage and is important as a therapeutic target. Certain Golgi-associated molecules have recently been demonstrated to be regulated by androgen action, and the Golgi is emerging as a new therapeutic target in prostate cancer. The key Golgi-associated molecules essential for prostate cancer development and the potential therapeutic options targeting the Golgi apparatus are discussed.

  6. PROJECT HEAD START, SUMMER 1966, LECTURES PRESENTED IN THE ORIENTATION SESSION FOR PERSONNEL IN THE CHILD DEVELOPMENT CENTERS (SAN FRANCISCO STATE COLLEGE, JUNE 19-24, 1966).

    Science.gov (United States)

    LEWIS, MARY S.

    IN JUNE, 1966, SAN FRANCISCO STATE COLLEGE CONDUCTED AN ORIENTATION SESSION FOR THE PERSONNEL OF CHILD CARE CENTERS IN HEAD START PROGRAMS. FOLLOWING THE WASHINGTON, D. C., HEAD START STAFF GUIDELINES, THE 15 SPEAKERS PRESENTED SUCH TOPICS AS THE IMPACT OF POVERTY, HEALTH AND NUTRITION NEEDS FOR DISADVANTAGED CHILDREN, LANGUAGE DEVELOPMENT,…

  7. Voting Present

    Directory of Open Access Journals (Sweden)

    James Lo

    2013-12-01

    Full Text Available During his time as a state senator in Illinois, Barack Obama voted “Present” 129 times, a deliberate act of nonvoting that subsequently became an important campaign issue during the 2008 presidential elections. In this article, I examine the use of Present votes in the Illinois state senate. I find evidence that Present votes can largely be characterized as protest votes used as a legislative tool by the minority party. Incorporating information from Present votes into a Bayesian polytomous item-response model, I find that this information increases the efficiency of ideal point estimates by approximately 35%. There is little evidence of significant moderation by Obama when Present votes are accounted for, though my results suggest that Obama’s voting record may have moderated significantly before his subsequent election to the U.S. Senate. My results also suggest that because legislative nonvoting may occur for a variety of reasons, naive inclusion of nonvoting behavior into vote choice models may lead to biased results.

  8. Design and performance of a cryogenic apparatus for magnetically trapping ultracold neutrons

    Science.gov (United States)

    Huffman, P. R.; Coakley, K. J.; Doyle, J. M.; Huffer, C. R.; Mumm, H. P.; O'Shaughnessy, C. M.; Schelhammer, K. W.; Seo, P.-N.; Yang, L.

    2014-11-01

    The cryogenic design and performance of an apparatus used to magnetically confine ultracold neutrons (UCN) is presented. The apparatus is part of an effort to measure the beta-decay lifetime of the free neutron and is comprised of a high-current superconducting magnetic trap that surrounds ∼21 l of isotopically pure 4He cooled to approximately 250 mK. A 0.89 nm neutron beam can enter the apparatus from one end of the magnetic trap and a light collection system allows visible light generated within the helium by decays to be transported to detectors at room temperature. Two cryocoolers are incorporated to reduce liquid helium consumption.

  9. An experimental apparatus for study of direct {\\beta}-radiation conversion for energy harvesting

    CERN Document Server

    Haim, Y; deBotton, G

    2014-01-01

    This paper introduces the development and testing of an experimental apparatus for characterization of a direct charging nuclear battery. The battery consists of a parallel-plates capacitor which is charged in a vacuum by the current of {\\beta}-radiation particles (electrons) emitted from a radioisotope. A 63Ni radioisotope with an activity of 15mCi that produces a 20pA current was selected as the radiation source. The apparatus is unique in its design, having ultra-low leakage current and a few options for charge measurements. Preliminary results of a few tests are presented to demonstrate the capabilities of the apparatus.

  10. Systems, Apparatuses, and Methods for Using Durable Adhesively Bonded Joints for Sandwich Structures

    Science.gov (United States)

    Smeltzer, III, Stanley S. (Inventor); Lundgren, Eric C. (Inventor)

    2014-01-01

    Systems, methods, and apparatus for increasing durability of adhesively bonded joints in a sandwich structure. Such systems, methods, and apparatus includes an first face sheet and an second face sheet as well as an insert structure, the insert structure having a first insert face sheet, a second insert face sheet, and an insert core material. In addition, sandwich core material is arranged between the first face sheet and the second face sheet. A primary bondline may be coupled to the face sheet(s) and the splice. Further, systems, methods, and apparatus of the present disclosure advantageously reduce the load, provide a redundant path, reduce structural fatigue, and/or increase fatigue life.

  11. Achievements in creation of the space patrol apparatus of ionizing radiation of the Sun

    Energy Technology Data Exchange (ETDEWEB)

    Avakyan, S.V. [S.I. Vavilov State Optical Institute, Birgevaya linia, 12, Saint-Petersburg 199034 (Russian Federation); Afanas' ev, I.M. [S.I. Vavilov State Optical Institute, Birgevaya linia, 12, Saint-Petersburg 199034 (Russian Federation)]. E-mail: afanasy@pochta.ru; Kuvaldin, E.V. [S.I. Vavilov State Optical Institute, Birgevaya linia, 12, Saint-Petersburg 199034 (Russian Federation); Leonov, N.B. [S.I. Vavilov State Optical Institute, Birgevaya linia, 12, Saint-Petersburg 199034 (Russian Federation); Savushkin, A.V. [S.I. Vavilov State Optical Institute, Birgevaya linia, 12, Saint-Petersburg 199034 (Russian Federation); Serova, A.E. [S.I. Vavilov State Optical Institute, Birgevaya linia, 12, Saint-Petersburg 199034 (Russian Federation); Voronin, N.A. [S.I. Vavilov State Optical Institute, Birgevaya linia, 12, Saint-Petersburg 199034 (Russian Federation)

    2005-05-01

    The paper describes the results and achievements of our work in the creation of optical-electronic instruments for space patrol apparatus of ionizing radiation of the Sun. At present, such monitoring of the most important solar irradiance in the spectral range of 0.8-119 nm does not exist anywhere in the world because of the methodological and technical difficulties. The main difficulty was overcome only after the creation of a 'solar-blind' detector-open secondary electron multiplier (SEM), which was produced by the S.I. Vavilov State Optical Institute (SOI). Now all the space patrol instrumentation has been created and laboratory tested. The basic points of the work are presented here.

  12. Apparatus for simultaneous rheology and small-angle neutron scattering from high-viscosity polymer melts and blends

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Jitendra, E-mail: jitendra.sharma@gmail.co [Department of Chemistry, Science Site Laboratories, University of Durham, South Road, Durham DH1 3LE (United Kingdom); King, Stephen M. [ISIS Facility, Rutherford Appleton Laboratory, Chilton, Didcot, Oxon OX11 0QX (United Kingdom); Bohlin, Leif [Reologen i Lund AB, Oved 19, S-27594 Sjoebo (Sweden); Clarke, Nigel [Department of Chemistry, Science Site Laboratories, University of Durham, South Road, Durham DH1 3LE (United Kingdom)

    2010-08-21

    In situ study of structural changes in soft matter systems while exposed to shear gives vital information related to the dynamics of polymers. A new shear apparatus has been developed for simultaneous rheology and in situ small-angle neutron scattering (SANS) from high-viscosity polymeric melts and blends. The apparatus described here enables one to perform rheological measurements in a plate-plate geometry under various modes of applied shear viz., steady, oscillatory, and other programmed mode, in a wide range of temperatures that can be varied from ambient to 550 K. A major advantage of this instrument compared to other counterparts (available elsewhere) for a similar geometry of operation is that it is also equipped with a strain sensor for rheological measurements along with the capability to offer both steady state and oscillatory shearing measurements with a single instrument, something hitherto not possible due to the limitations imposed by the conceived design of the instruments. Besides, the parallel plate geometry of the apparatus utilized here offers a distinctive edge over Couette type cells used for similar purposes as the latter is often not suitable for studies on well-entangled concentrated polymeric systems due to high viscosity and associated large sample volume requirements. The details of the design, construction and operation of such device, the Rheo-SANS apparatus, are described in this paper. Preliminary test data obtained from the initial experiments on different samples of blends of deuterated polystyrene and poly(vinyl methyl ether) are presented and discussed within the context of theories known to predict their behaviour.

  13. Characteristics of a liquid-helium-free calibration apparatus for cryogenic thermometers

    Energy Technology Data Exchange (ETDEWEB)

    Shimazaki, T. [National Metrology Institute of Japan, AIST, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8563 (Japan)

    2013-09-11

    Closed-cycle Joule-Thomson (JT) cryocoolers have been developed at National Metrology Institute of Japan (NMIJ)/National Institute of Advanced Industrial Science and Technology (AIST) with the aim of realizing a liquid-helium-free calibration apparatus for cryogenic thermometers between 0.65 K and 25 K. The latest JT cryocooler at NMIJ/AIST consists of a {sup 3}He JT cooling circuit and a pulse tube mechanical refrigerator. The characteristics of the apparatus including a residual gas analysis of the JT cooling circuit are presented in this paper. Currently the initial cool-down is performed using a heat-exchange gas. It normally takes about 30 h to reduce the temperature from room temperature to 5 K at the thermometer comparison block of the apparatus. The correct timing of the removal of the heatexchange gas is important for the efficient operation of the apparatus. Incomplete removal of the heat-exchange gas induces excess heat load on the apparatus and thermal disturbances. Some examples of abrupt temperature bursts are discussed in this paper. Mechanical refrigerators generate cyclic mechanical vibrations, and precision resistance thermometers are usually very sensitive to a mechanical vibration. The measured vibration level of the developed apparatus is reported. The damage to the apparatus due to the magnitude 9.0 earthquake on March 11, 2011, and possible countermeasures in the case of future earthquakes are also discussed.

  14. Characteristics of a liquid-helium-free calibration apparatus for cryogenic thermometers

    Science.gov (United States)

    Shimazaki, T.

    2013-09-01

    Closed-cycle Joule-Thomson (JT) cryocoolers have been developed at National Metrology Institute of Japan (NMIJ)/National Institute of Advanced Industrial Science and Technology (AIST) with the aim of realizing a liquid-helium-free calibration apparatus for cryogenic thermometers between 0.65 K and 25 K. The latest JT cryocooler at NMIJ/AIST consists of a 3He JT cooling circuit and a pulse tube mechanical refrigerator. The characteristics of the apparatus including a residual gas analysis of the JT cooling circuit are presented in this paper. Currently the initial cool-down is performed using a heat-exchange gas. It normally takes about 30 h to reduce the temperature from room temperature to 5 K at the thermometer comparison block of the apparatus. The correct timing of the removal of the heatexchange gas is important for the efficient operation of the apparatus. Incomplete removal of the heat-exchange gas induces excess heat load on the apparatus and thermal disturbances. Some examples of abrupt temperature bursts are discussed in this paper. Mechanical refrigerators generate cyclic mechanical vibrations, and precision resistance thermometers are usually very sensitive to a mechanical vibration. The measured vibration level of the developed apparatus is reported. The damage to the apparatus due to the magnitude 9.0 earthquake on March 11, 2011, and possible countermeasures in the case of future earthquakes are also discussed.

  15. Methods and apparatus for cooling electronics

    Science.gov (United States)

    Hall, Shawn Anthony; Kopcsay, Gerard Vincent

    2014-12-02

    Methods and apparatus are provided for choosing an energy-efficient coolant temperature for electronics by considering the temperature dependence of the electronics' power dissipation. This dependence is explicitly considered in selecting the coolant temperature T.sub.0 that is sent to the equipment. To minimize power consumption P.sub.Total for the entire system, where P.sub.Total=P.sub.0+P.sub.Cool is the sum of the electronic equipment's power consumption P.sub.0 plus the cooling equipment's power consumption P.sub.Cool, P.sub.Total is obtained experimentally, by measuring P.sub.0 and P.sub.Cool, as a function of three parameters: coolant temperature T.sub.0; weather-related temperature T.sub.3 that affects the performance of free-cooling equipment; and computational state C of the electronic equipment, which affects the temperature dependence of its power consumption. This experiment provides, for each possible combination of T.sub.3 and C, the value T.sub.0* of T.sub.0 that minimizes P.sub.Total. During operation, for any combination of T.sub.3 and C that occurs, the corresponding optimal coolant temperature T.sub.0* is selected, and the cooling equipment is commanded to produce it.

  16. Personal cooling apparatus and method

    Energy Technology Data Exchange (ETDEWEB)

    Siman-Tov, Moshe (Knoxville, TN); Crabtree, Jerry Allen (Knoxville, TN)

    2001-01-01

    A portable lightweight cooling apparatus for cooling a human body is disclosed, having a channeled sheet which absorbs sweat and/or evaporative liquid, a layer of highly conductive fibers adjacent the channeled sheet; and, an air-moving device for moving air through the channeled sheet, wherein the layer of fibers redistributes heat uniformly across the object being cooled, while the air moving within the channeled sheet evaporates sweat and/or other evaporative liquid, absorbs evaporated moisture and the uniformly distributed heat generated by the human body, and discharges them into the environment. Also disclosed is a method for removing heat generated by the human body, comprising the steps of providing a garment to be placed in thermal communication with the body; placing a layer of highly conductive fibers within the garment adjacent the body for uniformly distributing the heat generated by the body; attaching an air-moving device in communication with the garment for forcing air into the garment; removably positioning an exchangeable heat sink in communication with the air-moving device for cooling the air prior to the air entering the garment; and, equipping the garment with a channeled sheet in communication with the air-moving device so that air can be directed into the channeled sheet and adjacent the layer of fibers to expell heat and moisture from the body by the air being directed out of the channeled sheet and into the environment. The cooling system may be configured to operate in both sealed and unsealed garments.

  17. Pulse measurement apparatus and method

    Science.gov (United States)

    Marciante, John R.; Donaldson, William R.; Roides, Richard G.

    2011-10-25

    An embodiment of the invention is directed to a pulse measuring system that measures a characteristic of an input pulse under test, particularly the pulse shape of a single-shot, nano-second duration, high shape-contrast optical or electrical pulse. An exemplary system includes a multi-stage, passive pulse replicator, wherein each successive stage introduces a fixed time delay to the input pulse under test, a repetitively-gated electronic sampling apparatus that acquires the pulse train including an entire waveform of each replica pulse, a processor that temporally aligns the replicated pulses, and an averager that temporally averages the replicated pulses to generate the pulse shape of the pulse under test. An embodiment of the invention is directed to a method for measuring an optical or an electrical pulse shape. The method includes the steps of passively replicating the pulse under test with a known time delay, temporally stacking the pulses, and temporally averaging the stacked pulses. An embodiment of the invention is directed to a method for increasing the dynamic range of a pulse measurement by a repetitively-gated electronic sampling device having a rated dynamic range capability, beyond the rated dynamic range of the sampling device; e.g., enhancing the dynamic range of an oscilloscope. The embodied technique can improve the SNR from about 300:1 to 1000:1. A dynamic range enhancement of four to seven bits may be achieved.

  18. Pin-on-disk apparatus for tribological studies of polymeric materials

    DEFF Research Database (Denmark)

    Ølholm Larsen, Thomas; Løgstrup Andersen, Tom; Thorning, Bent;

    2009-01-01

    polymeric materials under dry-sliding conditions. The different main parts of the apparatus are described in a way which partly explains the choice of construction and partly makes it possible to produce a similar apparatus. Furthermore, a limited amount of tribological data is presented mainly to exemplify...... the usefulness of the machine. The POD apparatus is successfully applied to measure coefficients of friction, wear rates and disk temperatures at an acceptable level of precision and accuracy. Tribological data obtained with this equipment show the effect of reinforcing an epoxy resin with a plain glass fiber...... weave. The data presented in this paper are limited since the main objective is to describe the construction of a POD apparatus. The paper is intended to be a source of inspiration for industrial or academic laboratories who want to establish their own tailor-suited tribological test-equipment, instead...

  19. Method and apparatus for detecting cyber attacks on an alternating current power grid

    Energy Technology Data Exchange (ETDEWEB)

    McEachern, Alexander; Hofmann, Ronald

    2017-04-11

    A method and apparatus for detecting cyber attacks on remotely-operable elements of an alternating current distribution grid. Two state estimates of the distribution grid are prepared, one of which uses micro-synchrophasors. A difference between the two state estimates indicates a possible cyber attack.

  20. Analysis of the transient rotating cylinder apparatus for the measurement of liquid-liquid interface shear viscosity

    DEFF Research Database (Denmark)

    Hassager, Ole; Westborg, H

    1987-01-01

    An analysis of the transient rotating cylinder apparatus for the measurement of liquid-liquid interface viscosity is given. An analytical expression that allows the determination of the interfacial viscosity from observations of the interface movement is given. The expression is presented...... in tabular form for selected values of the physical parameters of the two phases, and suggestions for apparatus design are given....

  1. Method and apparatus for measuring electromagnetic radiation

    Science.gov (United States)

    Been, J. F. (Inventor)

    1973-01-01

    An apparatus and method are described in which the capacitance of a semiconductor junction subjected to an electromagnetic radiation field is utilized to indicate the intensity or strength of the radiation.

  2. Materials processing apparatus development for fluoride glass

    Science.gov (United States)

    Smith, Guy A.; Kosten, Sue; Workman, Gary L.

    1994-01-01

    Fluoride glasses have great potential for optical fiber communications due to the high transmittance when no microcrystallites occur during drawing operations. This work has developed apparatus to test the occurrence of microcrystallites during recrystallization in reduced gravity on the KC-135. The apparatus allows fluoride glass fiber, such as ZBLAN, to be melted and recrystallized during both the low and high g portions the parabolic flight.

  3. Apparatus, System, And Method For Roadway Monitoring

    KAUST Repository

    Claudel, Christian G.

    2015-06-02

    An apparatus, system, and method for monitoring traffic and roadway water conditions. Traffic flow and roadway flooding is monitored concurrently through a wireless sensor network. The apparatus and system comprises ultrasound rangefinders monitoring traffic flow, flood water conditions, or both. Routing information may be calculated from the traffic conditions, such that routes are calculated to avoid roadways that are impassable or are slow due to traffic conditions.

  4. Biocorrosion and biofouling of metals and alloys of industrial usage. Present state of the art at the beginning of the new millennium

    OpenAIRE

    Videla, H. A.

    2003-01-01

    An overview on the present state of the art on Biocorrosion and Biofouling of metals and alloys of industrial usage is offered on the basis of the experience gathered in our laboratory over 25 years of research. The key concepts to understand the main effects of microorganisms on metal decay are briefly discussed. New trends in monitoring and control strategies to mitigate biocorrosion and biofouling deleterious effects are also described. Several relevant cases of biocorrosion studied by our...

  5. 29 CFR 1910.219 - Mechanical power-transmission apparatus.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Mechanical power-transmission apparatus. 1910.219 Section... Mechanical power-transmission apparatus. (a) General requirements. (1) This section covers all types and... apparatus located in basements. All mechanical power transmission apparatus located in basements,...

  6. Versatile apparatus for thermoelectric characterization of oxides at high temperatures.

    Science.gov (United States)

    Schrade, Matthias; Fjeld, Harald; Norby, Truls; Finstad, Terje G

    2014-10-01

    An apparatus for measuring the Seebeck coefficient and electrical conductivity is presented and characterized. The device can be used in a wide temperature range from room temperature to 1050 °C and in all common atmospheres, including oxidizing, reducing, humid, and inert. The apparatus is suitable for samples with different geometries (disk-, bar-shaped), allowing a complete thermoelectric characterization (including thermal conductivity) on a single sample. The Seebeck coefficient α can be measured in both sample directions (in-plane and cross-plane) simultaneously. Electrical conductivity is measured via the van der Pauw method. Perovskite-type CaMnO3 and the misfit cobalt oxide (Ca2CoO3)q(CoO2) are studied to demonstrate the temperature range and to investigate the variation of the electrical properties as a function of the measurement atmosphere.

  7. The SHIVA Project: Spaceflight Holography in a Virtual Apparatus

    Science.gov (United States)

    Trolinger, Jim; Rogers, Jan; Witherow, William; Coimbra, Carlos; Rangel, Roger; Whitaker, Ann F. (Technical Monitor)

    2001-01-01

    The poster summarizes theoretical and experimental concepts used in the development of the proposed NASA flight experiment SHIVA (Spaceflight Holography in a Virtual Apparatus). SHIVA exploits a unique holography-based, diagnostics tools to understand the behavior of small particles subjected to transient accelerations. Flight experiment protocols and apparatus will test model equations, characterize the acceleration environment and other microgravity phenomena. The primary objective of SHIVA is to enhance the current understanding of complex dynamics of small particles subjected to transient microgravity conditions. Existing theory did not fully describe the movement of particles in fluids in the microgravity environment. Results from recent ground-based experiments and comparison with the model recently developed by Rangel and Coimbra are presented.

  8. Processes, data structures, and apparatuses for representing knowledge

    Science.gov (United States)

    Hohimer, Ryan E.; Thomson, Judi R.; Harvey, William J.; Paulson, Patrick R.; Whiting, Mark A.; Tratz, Stephen C.; Chappell, Alan R.; Butner, R. Scott

    2011-09-20

    Processes, data structures, and apparatuses to represent knowledge are disclosed. The processes can comprise labeling elements in a knowledge signature according to concepts in an ontology and populating the elements with confidence values. The data structures can comprise knowledge signatures stored on computer-readable media. The knowledge signatures comprise a matrix structure having elements labeled according to concepts in an ontology, wherein the value of the element represents a confidence that the concept is present in an information space. The apparatus can comprise a knowledge representation unit having at least one ontology stored on a computer-readable medium, at least one data-receiving device, and a processor configured to generate knowledge signatures by comparing datasets obtained by the data-receiving devices to the ontologies.

  9. Total ruptures of the extensor apparatus of the knee

    Directory of Open Access Journals (Sweden)

    Diogo Moura

    Full Text Available ABSTRACT OBJECTIVE: This was a retrospective case-control study on total ruptures of the extensor apparatus of the knee, aimed to compare patella fractures with tendinous ruptures. METHODS: The sample included 190 patients and 198 total ruptures of the knee extensor apparatus. All patients were evaluated by the same examiner after a minimum one-year follow-up. RESULTS: Tendinous ruptures occurred most frequently in men, in younger patients, and had better clinical and functional outcomes when compared with patella fractures; however, the former presented higher levels of thigh atrophy. Patella fractures occurred most frequently in women and in older patients and caused most frequently caused residual pain, muscle weakness, and limitations in daily activities. Comminuted fractures were related to high-energy trauma, lower clinical and functional outcomes, and higher levels of residual pain and osteosynthesis failure. Early removal of osteosynthesis material was related to better outcomes. Regarding the tendinous ruptures, over half of the patients presented risk conditions for tendinous degeneration; a longer delay until surgery was related to lower Kujala scores. CONCLUSION: The surgical repair of bilateral ruptures of the knee extensor apparatus resulted in satisfactory clinical and functional outcomes, which were better for tendinous ruptures when compared with patella fractures. However, these lesions are associated with non-negligible levels of residual pain, muscle weakness, atrophy, and other complications.

  10. Improvements to the APEX apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, I.; Back, B.B.; Betts, R.R. [and others

    1995-08-01

    A number of technical issues led us to rework extensively the APEX apparatus in summer 1994. During the earlier runs, a significant fraction of the 432 silicon detector elements showed degraded resolution such that they had to be excluded from the final analysis in software. The effect of this is to reduce the efficiency of APEX and possibly also to introduce holes in the acceptance which, for some perhaps exotic scenarios, might reduce the acceptance to an unacceptably low level. Also, the energy thresholds below which it is not possible to generate timing information from the silicon detectors, were high enough that the low-energy acceptance of APEX was compromised to a significant extent. The origins of these difficulties were in part due to degraded performance of the silicon detectors themselves, problems with the silicon cooling systems and electronics problems. Both silicon arrays were disassembled and sub-standard detectors replaced, all detectors were also cleaned with the result that all detectors now performed at the specified values of leakage current. The silicon cooling systems were disassembled and rebuilt with the result that many small leaks were fixed. Defective electronics channels were repaired or replaced. The rotating target wheel was also improved with the installation of new bearings and a computer-controlled rotation and readout system. The rebuilt wheel can now run at speeds up to 900 rpm for weeks on end without breakdown. The target wheel and associated beam sweeping now work extremely well so that low-melting-point targets such as Pb and In can be used in quite intense beams without melting.

  11. Evolution, present state and future of the radiochromic dyeing films; Evolucion, estado actual y futuro de las peliculas de tinte radiocromico

    Energy Technology Data Exchange (ETDEWEB)

    Villarreal B, J.E. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2000-07-01

    The evolution of radiochromic films, their present state and their developing future are the object of this work. For this purpose a review of the evolution was realized and also of the present state of using the radiochromic dyeing films as tools to determine the absorbed doses distribution produces by beta emissor sources, beta-gamma, electrons and X-rays. In particular it is presented the development of radiochromic films type GafChromic that by their quality in terms of reproducibility, sensibility and high spatial resolution they have been converted in those films of greatest use so dominating market. Since one of the application fields more important of this type of films is clinical dosimetry, the more eminent applications in this area are presented, which the high resolution dosimetry that use GafChromic has been converted in a basic tool. On the other hand the scopes of this type of dosimetry and the possible development lines of dosimetry with radiochromic dyeing films are discussed. (Author)

  12. The centrosome-Golgi apparatus nexus.

    Science.gov (United States)

    Rios, Rosa M

    2014-09-05

    A shared feature among all microtubule (MT)-dependent processes is the requirement for MTs to be organized in arrays of defined geometry. At a fundamental level, this is achieved by precisely controlling the timing and localization of the nucleation events that give rise to new MTs. To this end, MT nucleation is restricted to specific subcellular sites called MT-organizing centres. The primary MT-organizing centre in proliferating animal cells is the centrosome. However, the discovery of MT nucleation capacity of the Golgi apparatus (GA) has substantially changed our understanding of MT network organization in interphase cells. Interestingly, MT nucleation at the Golgi apparently relies on multiprotein complexes, similar to those present at the centrosome, that assemble at the cis-face of the organelle. In this process, AKAP450 plays a central role, acting as a scaffold to recruit other centrosomal proteins important for MT generation. MT arrays derived from either the centrosome or the GA differ in their geometry, probably reflecting their different, yet complementary, functions. Here, I review our current understanding of the molecular mechanisms involved in MT nucleation at the GA and how Golgi- and centrosome-based MT arrays work in concert to ensure the formation of a pericentrosomal polarized continuous Golgi ribbon structure, a critical feature for cell polarity in mammalian cells. In addition, I comment on the important role of the Golgi-nucleated MTs in organizing specialized MT arrays that serve specific functions in terminally differentiated cells.

  13. Motor development profile in 9-11 year-old children from the municipal education system of Maceio, Alagoas State, presenting low school performance

    Directory of Open Access Journals (Sweden)

    Maria Natália Santos da Silva

    2014-04-01

    Full Text Available Introduction: Children may present motor development delays that can influence their learning process, hence the need for specific assessment for the early detection of such delays in an attempt to resolve or mitigate possible future damage. Objective: Profile of motor development in children aged 9-11 years old presenting low academic achievement in the municipal education system of Maceio, Alagoas state. Methodology: An exploratory, descriptive, transversal study which uses the Motor Development Scale (MDS to analyze the main components of performance. Evaluations were carried out with 43 children of both genders. Results: The children assessed presented motor profiles ranging from “normal” to “far below average”, corroborating the findings in the literature. Conclusions: The results obtained are in agreement with the literature, showing a close relation between motor development and low school performance, emphasizing the importance of psychomotor intervention for the maturation of more complex motor patterns.

  14. Method And Apparatus For Evaluatin Of High Temperature Superconductors

    Science.gov (United States)

    Fishman, Ilya M.; Kino, Gordon S.

    1996-11-12

    A technique for evaluation of high-T.sub.c superconducting films and single crystals is based on measurement of temperature dependence of differential optical reflectivity of high-T.sub.c materials. In the claimed method, specific parameters of the superconducting transition such as the critical temperature, anisotropy of the differential optical reflectivity response, and the part of the optical losses related to sample quality are measured. The apparatus for performing this technique includes pump and probe sources, cooling means for sweeping sample temperature across the critical temperature and polarization controller for controlling a state of polarization of a probe light beam.

  15. Intracellular zinc distribution in mitochondria, ER and the Golgi apparatus.

    Science.gov (United States)

    Lu, Qiping; Haragopal, Hariprakash; Slepchenko, Kira G; Stork, Christian; Li, Yang V

    2016-01-01

    Zinc (Zn(2+)) is required for numerous cellular functions. As such, the homeostasis and distribution of intracellular zinc can influence cellular metabolism and signaling. However, the exact distribution of free zinc within live cells remains elusive. Previously we showed the release of zinc from thapsigargin/IP3-sensitive endoplasmic reticulum (ER) storage in cortical neurons. In the present study, we investigated if other cellular organelles also contain free chelatable zinc and function as organelle storage for zinc. To identify free zinc within the organelles, live cells were co-stained with Zinpyr-1, a zinc fluorescent dye, and organelle-specific fluorescent dyes (MitoFluor Red 589: mitochondria; ER Tracker Red: endoplasmic reticulum; BODIPY TR ceramide: Golgi apparatus; Syto Red 64: nucleus). We examined organelles that represent potential storing sites for intracellular zinc. We showed that zinc fluorescence staining was co-localized with MitoFluor Red 589, ER Tracker Red, and BODIPY TR ceramide respectively, suggesting the presence of free zinc in mitochondria, endoplasmic reticulum, and the Golgi apparatus. On the other hand, cytosol and nucleus had nearly no detectable zinc fluorescence. It is known that nucleus contains high amount of zinc binding proteins that have high zinc binding affinity. The absence of zinc fluorescence suggests that there is little free zinc in these two regions. It also indicates that the zinc fluorescence detected in mitochondria, ER and Golgi apparatus represents free chelatable zinc. Taken together, our results support that these organelles are potential zinc storing organelles during cellular zinc homeostasis.

  16. Light Emitting, Photovoltaic or Other Electronic Apparatus and System

    Science.gov (United States)

    Ray, William Johnstone (Inventor); Lowenthal, Mark D. (Inventor); Shotton, Neil O. (Inventor); Blanchard, Richard A. (Inventor); Lewandowski, Mark Allan (Inventor); Fuller, Kirk A. (Inventor); Frazier, Donald Odell (Inventor)

    2016-01-01

    The present invention provides an electronic apparatus, such as a lighting device comprised of light emitting diodes (LEDs) or a power generating apparatus comprising photovoltaic diodes, which may be created through a printing process, using a semiconductor or other substrate particle ink or suspension and using a lens particle ink or suspension. An exemplary apparatus comprises a base; at least one first conductor; a plurality of diodes coupled to the at least one first conductor; at least one second conductor coupled to the plurality of diodes; and a plurality of lenses suspended in a polymer deposited or attached over the diodes. The lenses and the suspending polymer have different indices of refraction. In some embodiments, the lenses and diodes are substantially spherical, and have a ratio of mean diameters or lengths between about 10:1 and 2:1. The diodes may be LEDs or photovoltaic diodes, and in some embodiments, have a junction formed at least partially as a hemispherical shell or cap.

  17. Design of neutral particle incident heating apparatus for large scale helical apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Kaneko, Osamu; Oka, Yoshihide; Osakabe, Masaki; Takeiri, Yasuhiko; Tsumori, Katsuyoshi; Akiyama, Ryuichi; Asano, Eiji; Kawamoto, Toshikazu; Kuroda, Tsutomu [National Inst. for Fusion Science, Nagoya (Japan)

    1997-02-01

    In the Institute of Nuclear Fusion Science, construction of the large scale helical apparatus has been progressed favorably, and constructions of the heating apparatus as well as of electron resonance apparatus were begun in their orders under predetermined manner since 1994 fiscal year. And, on 1995 fiscal year, construction of neutral particle incident heating apparatus, leading heat apparatus, was begun under 3 years planning. The plasma heating study system adopted the study results developed in this institute through the large scale hydrogen negative ion source and also adopted thereafter development on nuclear fusion study by modifying the original specification set at the beginning of the research plan before 7 years. As a result, system design was changed from initial 125 KeV to 180 KeV in the beam energy and to execute 15 MW incidence using two sets beam lines, to begin its manufacturing. Here is described on its new design with reason of its modifications. (G.K.)

  18. Apparatus and methods for determining at least one characteristic of a proximate environment

    Science.gov (United States)

    Novascone, Stephen R.; West, Phillip B.; Anderson, Michael J.

    2008-04-15

    Methods and an apparatus for determining at least one characteristic of an environment are disclosed. A vibrational energy may be imparted into an environment and a magnitude of damping of the vibrational energy may be measured and at least one characteristic of the environment may be determined. Particularly, a vibratory source may be operated and coupled to an environment. At least one characteristic of the environment may be determined based on a shift in at least one steady-state frequency of oscillation of the vibratory source. An apparatus may include at least one vibratory source and a structure for positioning the at least one vibratory source proximate to an environment. Further, the apparatus may include an analysis device for determining at least one characteristic of the environment based at least partially upon shift in a steady-state oscillation frequency of the vibratory source for the given impetus.

  19. Present and potential nitrogen outputs from Norwegian soft water lakes – an assessment made by applying the steady-state First-order Acidity Balance (FAB model

    Directory of Open Access Journals (Sweden)

    Ø. Kaste

    2002-01-01

    Full Text Available The steady-state First-order Acidity Balance (FAB model for calculating critical loads of sulphur (S and nitrogen (N is applied to 609 Norwegian soft-water lakes to assess the future nitrate (NO3‾ leaching potential under present (1992-96 S and N deposition. The lakes were separated into five groups receiving increasing levels of N deposition (-2yr-1. Using long-term sustainable N sink rates presently recommended for FAB model applications, N immobilisation, net N uptake in forests, denitrification and in-lake N retention were estimated for each group of lakes. Altogether, the long-term N sinks constituted 9.9 ± 3.2 to 40.5 ± 11.4 meq m-2yr-1 in the lowest and highest N deposition categories, respectively. At most sites, the current N deposition exceeds the amount of N retained by long-term sustainable N sinks plus the NO3‾ loss via the lake outlets. This excess N, which is currently retained within the catchments may, according to the FAB model, leach as acidifying NO3‾ in the future. If these predictions are fulfilled, NO3‾ leaching at sites in the various N deposition categories will increase dramatically from present (1995 mean levels of 1-20 meq m-2yr-1, to mean levels of 7-70 meq m-2yr-1 at future steady state. To illustrate the significance of such an increase in NO3‾ leaching, the mean Acid Neutralising Capacity (ANC at sites in the highest N deposition category may decrease from -18 ± 15 μeq L-1 at present, to -40 ± 20 μeq L-1. Under present S and N deposition levels, the FAB model predicts that 46% of the Norwegian lakes may experience exceedances of critical loads for acidifying deposition. In comparison, the Steady-State Water Chemistry model (SSWC, which considers only the present N leaching level, estimates critical load exceedances in 37% of the lakes under the same deposition level. Thus far, there are great uncertainties regarding both the time scales and the extent of future N leaching, and it is largely unknown

  20. The performance of the K10, K6 and GHQ-12 to screen for present state DSM-IV disorders among disability claimants

    Directory of Open Access Journals (Sweden)

    Cornelius Bert LR

    2013-02-01

    Full Text Available Abstract Background Screening for mental disorders among disability claimants is important, since mental disorders seem to be seriously under-recognized in this population. However, performance of potentially suitable scales is unknown. We aimed to evaluate the psychometric properties of three scales, the 10- and 6-item Kessler Psychological Distress Scale (K10, K6 and the 12-item General Health Questionnaire (GHQ-12, to predict present state mental disorders, classified according to the Diagnostic and Statistical Manual of Mental Disorders, 4thEdition (DSM-IV among disability claimants. Methods All scales were completed by a representative sample of persons claiming disability benefit after two years sickness absence (n=293. All diagnoses, both somatic and mental, were included. The gold standard was the Composite International Diagnostic Interview (CIDI 3.0 to diagnose present state DSM-IV disorder. Cronbach’s α, sensitivity, specificity, positive (PPV and negative predictive values (NPV, and the areas under the Receiver Operating Characteristic curve (AUC were calculated. Results Cronbach’s alpha’s were 0.919 (K10, 0.882 (K6 and 0.906 (GHQ-12. The optimal cut-off scores were 24 (K10, 14 ( K6 and 20 (GHQ-12. The PPV and the NPV for the optimal cut point of the K10 was 0.53 and 0.89, for the K6 0.51 and 0.87, and for the GHQ-12 0.50 and 0.82. The AUC’s for 30-day cases were 0.806 (K10; 95% CI 0.749-0.862, 0.796 (K6; 95% CI 0.737-0.854 and 0.695 (GHQ-12; 95% CI 0.626-0.765. Conclusions The K10 and K6 are reliable and valid scales to screen for present state DSM-IV mental disorder. The optimal cut-off scores are 24 (K10 and 14 (K6. The GHQ-12 (optimal cut-off score: 20 is outperformed by the K10 and K6, which are to be preferred above the GHQ-12. The scores on separate items of the K10 and K6 can be used in disability assessment settings as an agenda for an in-depth follow-up clinical interview to ascertain the presence of present state

  1. Measuring the Heavens to Rule the Territory: Filipe Folque and the Teaching of Astronomy at the Lisbon Polytechnic School and the Modernization of the State Apparatus in Nineteenth Century Portugal

    Science.gov (United States)

    Carolino, Luis Miguel

    2012-01-01

    This paper focuses on the astronomy teaching at the Lisbon Polytechnic School and its role in building a modern technoscientific state in Portugal during the nineteenth century. It examines particularly the case of Filipe Folque, who taught astronomy and geodesy at the Lisbon Polytechnic from 1837 to 1856, and played a pivotal role in the geodetic…

  2. Development of a spatial filtering apparatus

    Science.gov (United States)

    Wilson, Nicolle

    This thesis contains a discussion of the theoretical background for Fourier spatial filtering and a description of the design and construction of a portable in-class spatial filtering apparatus. A portable, in-class spatial filtering demonstration apparatus was designed and built. This apparatus uses liquid crystal display (LCD) panels from two projectors as the object and filter masks. The blue LCD panel from the first projector serves as the object mask, and the red panel from the second projector serves as the filter mask. The panels were extracted from their projectors and mounted onto aluminum blocks which are held in place by optical component mounts. Images are written to the LCD panels via custom open source software developed for this apparatus which writes independent monochromatic images to the video signal. The software has two monochromatic image windows, basic image manipulation tools, and two video feed input display windows. Two complementary metal-oxide semiconductor (CMOS) sensors are positioned to record the reconstructed image of the object mask and the diffraction pattern created by the object mask. The object and filter mask can be digitally changed and the effects on the filtered image and diffraction pattern can be observed in real-time. The entire apparatus is assembled onto a rolling cart which allows it to be easily taken into classrooms.

  3. A Study on Test Technology to Diagnose the Power Apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K. H.; Kang, Y. S.; Jeon, Y. K.; Lee, W. Y.; Kang, D. S.; Kyu, H. S.; Sun, J. H.; Jo, K. H. [Korea Electrotechnology Research Institute (Korea, Republic of); Jung, J. S.; Mun, Y. T.; Lee, K. H.; Jung, E. H.; Kim, J. H. [Korea Water Resources Corporation (Korea, Republic of)

    1997-02-01

    In this study, we have educated KOWACO(Korea Water Resources Corporation) specialists about the insulation diagnostic technology and trained them the insulation diagnostic test and estimation method of power apparatus. The main results of this study are as follows; A. Education of basic high-voltage engineering. B. Research of insulation characteristic and deterioration mechanism in power apparatus C. Discussion on high-voltage test standard specifications. D. Study on insulation deterioration diagnostics in power apparatus. E. Field testing of insulation diagnosis in power apparatus. F. Engineering of insulation diagnostic testing apparatus to diagnose power apparatus. KOWACO specialists are able to diagnose insulation diagnostic test of power apparatus through this study. As they have instruments to diagnose power apparatus, they can do the test and estimation of the power apparatus insulation diagnosis. (author). refs., figs., tabs.

  4. [The state of the nasal cavity and paranasal sinuses in the children presenting with congenital cleft of upper lip and palate].

    Science.gov (United States)

    Bogoroditskaya, A V; Sarafanova, M E; Radtsig, E Yu; Prityko, A G

    2015-01-01

    The objective of the present study was to evaluate the state of the nasal cavity and paranasal sinuses in the children presenting with congenital cleft of upper lip and palate (CLP). A total of 23 children at the age from 9 to 16 years who had undergone the surgical treatment of the above malformations during the first year of life were examined. The comprehensive study including routine ENT examination, endoscopic examination of the nasal cavity and nasopharynx, and computed tomography has demonstrated that 50% of the patients with congenital cleft of upper lift and palate suffered the deflection of the nasal septum associated with hyperplasia of inferior turbinal bones. The children with congenital cleft of upper lip and palate were characterized by enhanced pneumatization of the anterior end of the middle turbinate despite the absence of well apparent differences between their paranasal sinuses and those of the healthy children, with the degree of pneumatization being consistent with the patient's age in both groups.

  5. High pressure/high temperature thermogravimetric apparatus. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.; Suuberg, E.M.

    1999-12-01

    The purpose of this instrumentation grant was to acquire a state-of-the-art, high pressure, high temperature thermogravimetric apparatus (HP/HT TGA) system for the study of the interactions between gases and carbonaceous solids for the purpose of solving problems related to coal utilization and applications of carbon materials. The instrument that we identified for this purpose was manufactured by DMT (Deutsche Montan Technologies)--Institute of Cokemaking and Coal Chemistry of Essen, Germany. Particular features of note include: Two reactors: a standard TGA reactor, capable of 1100 C at 100 bar; and a high temperature (HT) reactor, capable of operation at 1600 C and 100 bar; A steam generator capable of generating steam to 100 bar; Flow controllers and gas mixing system for up to three reaction gases, plus a separate circuit for steam, and another for purge gas; and An automated software system for data acquisition and control. The HP/TP DMT-TGA apparatus was purchased in 1996 and installed and commissioned during the summer of 1996. The apparatus was located in Room 128 of the Prince Engineering Building at Brown University. A hydrogen alarm and vent system were added for safety considerations. The system has been interfaced to an Ametek quadruple mass spectrometer (MA 100), pumped by a Varian V250 turbomolecular pump, as provided for in the original proposed. With this capability, a number of gas phase species of interest can be monitored in a near-simultaneous fashion. The MS can be used in a few different modes. During high pressure, steady-state gasification experiments, it is used to sample, measure, and monitor the reactant/product gases. It can also be used to monitor gas phase species during nonisothermal temperature programmed reaction (TPR) or temperature programmed desorption (TPD) experiments.

  6. Method and apparatus for managing transactions with connected computers

    Science.gov (United States)

    Goldsmith, Steven Y.; Phillips, Laurence R.; Spires, Shannon V.

    2003-01-01

    The present invention provides a method and apparatus that make use of existing computer and communication resources and that reduce the errors and delays common to complex transactions such as international shipping. The present invention comprises an agent-based collaborative work environment that assists geographically distributed commercial and government users in the management of complex transactions such as the transshipment of goods across the U.S.-Mexico border. Software agents can mediate the creation, validation and secure sharing of shipment information and regulatory documentation over the Internet, using the World-Wide Web to interface with human users.

  7. Correlating molecular phylogeny with venom apparatus occurrence in Panamic auger snails (Terebridae).

    Science.gov (United States)

    Holford, Mandë; Puillandre, Nicolas; Modica, Maria Vittoria; Watkins, Maren; Collin, Rachel; Bermingham, Eldredge; Olivera, Baldomero M

    2009-11-05

    Central to the discovery of neuroactive compounds produced by predatory marine snails of the superfamily Conoidea (cone snails, terebrids, and turrids) is identifying those species with a venom apparatus. Previous analyses of western Pacific terebrid specimens has shown that some Terebridae groups have secondarily lost their venom apparatus. In order to efficiently characterize terebrid toxins, it is essential to devise a key for identifying which species have a venom apparatus. The findings presented here integrate molecular phylogeny and the evolution of character traits to infer the presence or absence of the venom apparatus in the Terebridae. Using a combined dataset of 156 western and 33 eastern Pacific terebrid samples, a phylogenetic tree was constructed based on analyses of 16S, COI and 12S mitochondrial genes. The 33 eastern Pacific specimens analyzed represent four different species: Acus strigatus, Terebra argyosia, T. ornata, and T. cf. formosa. Anatomical analysis was congruent with molecular characters, confirming that species included in the clade Acus do not have a venom apparatus, while those in the clade Terebra do. Discovery of the association between terebrid molecular phylogeny and the occurrence of a venom apparatus provides a useful tool for effectively identifying the terebrid lineages that may be investigated for novel pharmacological active neurotoxins, enhancing conservation of this important resource, while providing supplementary information towards understanding terebrid evolutionary diversification.

  8. Correlating molecular phylogeny with venom apparatus occurrence in Panamic auger snails (Terebridae.

    Directory of Open Access Journals (Sweden)

    Mandë Holford

    Full Text Available Central to the discovery of neuroactive compounds produced by predatory marine snails of the superfamily Conoidea (cone snails, terebrids, and turrids is identifying those species with a venom apparatus. Previous analyses of western Pacific terebrid specimens has shown that some Terebridae groups have secondarily lost their venom apparatus. In order to efficiently characterize terebrid toxins, it is essential to devise a key for identifying which species have a venom apparatus. The findings presented here integrate molecular phylogeny and the evolution of character traits to infer the presence or absence of the venom apparatus in the Terebridae. Using a combined dataset of 156 western and 33 eastern Pacific terebrid samples, a phylogenetic tree was constructed based on analyses of 16S, COI and 12S mitochondrial genes. The 33 eastern Pacific specimens analyzed represent four different species: Acus strigatus, Terebra argyosia, T. ornata, and T. cf. formosa. Anatomical analysis was congruent with molecular characters, confirming that species included in the clade Acus do not have a venom apparatus, while those in the clade Terebra do. Discovery of the association between terebrid molecular phylogeny and the occurrence of a venom apparatus provides a useful tool for effectively identifying the terebrid lineages that may be investigated for novel pharmacological active neurotoxins, enhancing conservation of this important resource, while providing supplementary information towards understanding terebrid evolutionary diversification.

  9. Apparatus for the compact cooling of modules

    Energy Technology Data Exchange (ETDEWEB)

    Iyengar, Madhusudan K.; Parida, Pritish R.

    2015-07-07

    An apparatus for the compact cooling of modules. The apparatus includes a clip, a first cover plate coupled to a first side of the clip, a second cover plate coupled to a second side of the clip opposite to the first side of the clip, a first frame thermally coupled to the first cover plate, and a second frame thermally coupled to the second cover plate. Each of the first frame and the second frame may include a plurality of channels for passing coolant through the first frame and the second frame, respectively. Additionally, the apparatus may further include a filler for directing coolant through the plurality of channels, and for blocking coolant from flowing along the first side of the clip and the second side of the clip.

  10. Apparatus for processing electromagnetic radiation and method

    Science.gov (United States)

    Gatewood, George D. (Inventor)

    1983-01-01

    Measuring apparatus including a ruled member having alternate transparent and opaque zones. An optical coupler connecting the ruled member with electromagnetic radiation-conversion apparatus. The conversion apparatus may include a photomultiplier and a discriminator. Radiation impinging on the ruled member will, in part, be converted to electrical pulses which correspond to the intensity of the radiation. A method of processing electromagnetic radiation includes providing a member having alternating dark and light zones, establishing movement of the member through the beam of electromagnetic radiation with the dark zones interrupting passage of radiation through the rule, providing an optical coupler to connect a portion of the radiation with a conversion station where the radiation portion is converted into an electrical pulse which is related to the intensity of the radiation received at the conversion station. The electrical pulses may be counted and the digitized signals stored or permanently recorded to produce positional information.

  11. An inexpensive apparatus for toxicity screening

    Energy Technology Data Exchange (ETDEWEB)

    Lo Pinto, R.W.; Santelli, J. [Fairleigh Dickinson Univ., Teaneck, NJ (United States)

    1995-12-31

    An inexpensive apparatus was fabricated to monitor and record changes in the motility patterns of small aquatic invertebrates, such as Artemia salina and Daphnia magna, during acute toxicity tests. Within hours of exposure to a range toxicant concentrations the motility patterns change in a way that predicts the EC50. The work to date suggests there is a correlation between the EC50 following a 60 hour exposure, and motility data collected within the first 40 minutes of the test. The apparatus may be useful to speed range finding tests and for shortening the duration of acute toxicity tests of an effluent or receiving water. The apparatus may also be used to quantify erratic swimming in surviving organisms when a test is terminated.

  12. Purged window apparatus utilizing heated purge gas

    Science.gov (United States)

    Ballard, Evan O.

    1984-01-01

    A purged window apparatus utilizing tangentially injected heated purge gases in the vicinity of electromagnetic radiation transmitting windows, and a tapered external mounting tube to accelerate these gases to provide a vortex flow on the window surface and a turbulent flow throughout the mounting tube. Use of this apparatus prevents backstreaming of gases under investigation which are flowing past the mouth of the mounting tube which would otherwise deposit on the windows. Lengthy spectroscopic investigations and analyses can thereby be performed without the necessity of interrupting the procedures in order to clean or replace contaminated windows.

  13. Apparatus for combinatorial screening of electrochemical materials

    Science.gov (United States)

    A high throughput combinatorial screening method and apparatus for the evaluation of electrochemical materials using a single voltage source is disclosed wherein temperature changes arising from the application of an electrical load to a cell array are used to evaluate the relative electrochemical efficiency of the materials comprising the array. The apparatus may include an array of electrochemical cells that are connected to each other in parallel or in series, an electronic load for applying a voltage or current to the electrochemical cells , and a device , external to the cells, for monitoring the relative temperature of each cell when the load is applied.

    2009-12-15

    A high throughput combinatorial screening method and apparatus for the evaluation of electrochemical materials using a single voltage source (2) is disclosed wherein temperature changes arising from the application of an electrical load to a cell array (1) are used to evaluate the relative electrochemical efficiency of the materials comprising the array. The apparatus may include an array of electrochemical cells (1) that are connected to each other in parallel or in series, an electronic load (2) for applying a voltage or current to the electrochemical cells (1), and a device (3), external to the cells, for monitoring the relative temperature of each cell when the load is applied.

  14. Method and apparatus for combinatorial chemistry

    Science.gov (United States)

    Foote, Robert S.

    2007-02-20

    A method and apparatus are provided for performing light-directed reactions in spatially addressable channels within a plurality of channels. One aspect of the invention employs photoactivatable reagents in solutions disposed into spatially addressable flow streams to control the parallel synthesis of molecules immobilized within the channels. The reagents may be photoactivated within a subset of channels at the site of immobilized substrate molecules or at a light-addressable site upstream from the substrate molecules. The method and apparatus of the invention find particularly utility in the synthesis of biopolymer arrays, e.g., oligonucleotides, peptides and carbohydrates, and in the combinatorial synthesis of small molecule arrays for drug discovery.

  15. Apparatuses and methods for generating electric fields

    Science.gov (United States)

    Scott, Jill R; McJunkin, Timothy R; Tremblay, Paul L

    2013-08-06

    Apparatuses and methods relating to generating an electric field are disclosed. An electric field generator may include a semiconductive material configured in a physical shape substantially different from a shape of an electric field to be generated thereby. The electric field is generated when a voltage drop exists across the semiconductive material. A method for generating an electric field may include applying a voltage to a shaped semiconductive material to generate a complex, substantially nonlinear electric field. The shape of the complex, substantially nonlinear electric field may be configured for directing charged particles to a desired location. Other apparatuses and methods are disclosed.

  16. Apparatus for controlling molten core debris. [LMFBR

    Science.gov (United States)

    Golden, M.P.; Tilbrook, R.W.; Heylmun, N.F.

    1977-07-19

    Disclosed is an apparatus for containing, cooling, diluting, dispersing and maintaining subcritical the molten core debris assumed to melt through the bottom of a nuclear reactor pressure vessel in the unlikely event of a core meltdown. The apparatus is basically a sacrificial bed system which includes an inverted conical funnel, a core debris receptacle including a spherical dome, a spherically layered bed of primarily magnesia bricks, a cooling system of zig-zag piping in graphite blocks about and below the bed and a cylindrical liner surrounding the graphite blocks including a steel shell surrounded by firebrick. Tantalum absorber rods are used in the receptacle and bed. 9 claims, 22 figures.

  17. Spectroscopy Apparatus for the Measurement of The Hyperfine Structure of Antihydrogen

    CERN Document Server

    Malbrunot, C; Diermaier, M; Dilaver, N; Friedreich, S; Kolbinger, B; Lehner, S; Lundmark, R; Massiczek, O; Radics, B; Sauerzopf, C; Simon, M; Widmann, E; Wolf, M; Wunschek, B; Zmeskal, J

    2014-01-01

    The ASACUSA CUSP collaboration at the Antiproton Decelerator (AD) of CERN is planning to measure the ground-state hyperfine splitting of antihydrogen using an atomic spectroscopy beamline. We describe here the latest developments on the spectroscopy apparatus developed to be coupled to the antihydrogen production setup (CUSP).

  18. Present Research State of Cattle drinking water device%牛用饮水装置的研究现状浅析

    Institute of Scientific and Technical Information of China (English)

    戚江涛; 蒙贺伟; 李亚萍; 李成松; 坎杂

    2015-01-01

    Drinking water is important for cows physical activity, reasonable drinking can not only improve performance, re-duce morbidity, but also save the cost of feeding cattle, increase economic benefits. This paper analyzes the present research state of cattle drinking water device and recommendations for further development of cattle drinking water device technolo-gy.%饮水对于奶牛的生理活动有着重要意义,合理的饮水不仅能够提高产奶性能、降低发病率,而且还能节省牛场饲养成本、增加牛场经济效益等.本文分析了现有的牛用饮水装置的研究现状,提出了牛用饮水装置技术的进一步发展的建议.

  19. Methods and apparatus for handling or treating particulate material

    Science.gov (United States)

    Littman, Howard (Inventor); Plawsky, Joel L. (Inventor); Paccione, John D. (Inventor)

    2009-01-01

    An improved draft tube spout fluid bed (DTSFB) mixing, handling, conveying, and treating apparatus and systems, and methods for operating are provided. The apparatus and systems can accept particulate material and pneumatically or hydraulically conveying the material to mix and/or treat the material. In addition to conveying apparatus, a collection and separation apparatus adapted to receive the conveyed particulate material is also provided. The collection apparatus may include an impaction plate against which the conveyed material is directed to improve mixing and/or treatment. The improved apparatus are characterized by means of controlling the operation of the pneumatic or hydraulic transfer to enhance the mixing and/or reacting by controlling the flow of fluids, for example, air, into and out of the apparatus. The disclosed apparatus may be used to mix particulate material, for example, mortar; react fluids with particulate material; coat particulate material, or simply convey particulate material.

  20. The Compartmental Organization of the Golgi Apparatus.

    Science.gov (United States)

    Rothman, James E.

    1985-01-01

    Relations between structure and function of the Golgi apparatus are emerging from recent laboratory work on this cellular organelle which modifies proteins, sorts them, and packages them for delivery. The structure's three specialized compartments are explained through discussions of the glycosylation pathway, density-gradient experiments,…

  1. Apparatus and process for separating hydrogen isotopes

    Science.gov (United States)

    Heung, Leung K; Sessions, Henry T; Xiao, Xin

    2013-06-25

    The apparatus and process for separating hydrogen isotopes is provided using dual columns, each column having an opposite hydrogen isotopic effect such that when a hydrogen isotope mixture feedstock is cycled between the two respective columns, two different hydrogen isotopes are separated from the feedstock.

  2. 49 CFR 236.590 - Pneumatic apparatus.

    Science.gov (United States)

    2010-10-01

    ..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Automatic Train Stop, Train Control and Cab Signal Systems Inspection and Tests; Locomotive § 236.590 Pneumatic apparatus... results of such inspection recorded as provided by § 229.29(a). When a locomotive with automatic...

  3. Apparatus and method of navigating an instrument

    NARCIS (Netherlands)

    Bakker, N.H.; Den Heeten, G.J.

    2004-01-01

    An apparatus to be used with navigating an instrument in a vascular tree of a patient, comprises a patient's examination table, a C-arm, mounted to which is an X-ray source and an image recorder for registering first X-ray images of the patient, obtained by the use of the X-ray source, and a process

  4. SELECTIVE EXTRACTION OF ISOLATED MITOTIC APPARATUS

    Science.gov (United States)

    Bibring, Thomas; Baxandall, Jane

    1971-01-01

    Mitotic apparatus isolated from sea urchin eggs has been treated with meralluride sodium under conditions otherwise resembling those of its isolation. The treatment causes a selective morphological disappearance of microtubules while extracting a major protein fraction, probably consisting of two closely related proteins, which constitutes about 10% of mitotic apparatus protein. Extraction of other cell particulates under similar conditions yields much less of this protein. The extracted protein closely resembles outer doublet microtubule protein from sea urchin sperm tail in properties considered typical of microtubule proteins: precipitation by calcium ion and vinblastine, electrophoretic mobility in both acid and basic polyacrylamide gels, sedimentation coefficient, molecular weight, and, according to a preliminary determination, amino acid composition. An antiserum against a preparation of sperm tail outer doublet microtubules cross-reacts with the extract from mitotic apparatus. On the basis of these findings it appears that microtubule protein is selectively extracted from isolated mitotic apparatus by treatment with meralluride, and is a typical microtubule protein. PMID:5543404

  5. Apparatus for performing oil field laser operations

    Energy Technology Data Exchange (ETDEWEB)

    Zediker, Mark S.; Land, Mark S.; Rinzler, Charles C.; Faircloth, Brian O.; Koblick, Yeshaya; Moxley, Joel F.

    2017-01-03

    A system, apparatus and methods for delivering high power laser energy to perform laser operations in oil fields and to form a borehole deep into the earth using laser energy. A laser downhole assembly for the delivery of high power laser energy to surfaces and areas in a borehole, which assembly may have laser optics and a fluid path.

  6. Process and apparatus for conversion of biomass

    NARCIS (Netherlands)

    Bakker, R.R.C.; Hazewinkel, J.H.O.; Groenestijn, van J.W.

    2006-01-01

    The invention is directed to a process for the conversion of biomass, in particular lignocellulose-containing biomass into a product that may be further processes in a fermentation step. The invention is further directed to apparatus suitable for carrying out such processes. According to the inventi

  7. Process and apparatus for conversion of biomass

    NARCIS (Netherlands)

    Bakker, R.R.C.; Hazewinkel, J.H.O.; Groenestijn, van J.W.

    2006-01-01

    The invention is directed to a process for the conversion of cellulosic biomass, in particular lignocellulose-containing biomass into fermentable sugars. The invention is further directed to apparatus suitable for carrying out such processes. According to the invention biomass is converted into ferm

  8. Electroless plating apparatus for discrete microsized particles

    Science.gov (United States)

    Mayer, Anton

    1978-01-01

    Method and apparatus are disclosed for producing very uniform coatings of a desired material on discrete microsized particles by electroless techniques. Agglomeration or bridging of the particles during the deposition process is prevented by imparting a sufficiently random motion to the particles that they are not in contact with each other for a time sufficient for such to occur.

  9. A six-year study of the clinical presentation of cervical cancer and the management challenges encountered at a state teaching hospital in southeast Nigeria.

    Science.gov (United States)

    Eze, Justus N; Emeka-Irem, Esther N; Edegbe, Felix O

    2013-01-01

    Cervical cancer is still a major contributor to cancer-related mortality amongst women living in poor, rural communities of developing countries. The objective of this study is to establish the clinical presentation of cervical cancer and the management challenges encountered in Abakaliki, southeast Nigeria, with a view to finding intervention strategies. This study is a retrospective descriptive assessment of cases of clinically diagnosed cervical cancer managed at a state teaching hospital over six years. Of 76 cases managed, 61 (80.3%) cases notes were available for study. The mean age and parity of patients were 53.8 years and 6.8 years, respectively. The majority (75.4%) were illiterate. All had been married, but 42.6% were widowed. The main occupations were farming or petty trading. One patient (1.6%) had had a single Pap smear in her life. The major presenting complaints were abnormal vaginal bleeding (86.9%), offensive vaginal discharge (41.0%), and weight loss. Twenty patients (32.8%) were lost to follow-up prior to staging. Of the remaining 41 patients, 16 (39.0%) had stage III disease and 17.1% stage IV. Fifteen patients (24.6%) with late stage disease accepted referral, and were referred for radiotherapy. Those who declined were discharged home on request, though 4 (9.8%) died in the hospital. There was no feedback from referred patients confirming that they went and benefitted from the referral. The presentation followed known trends. Illiteracy, poverty, early marriages, high parity, widowhood, non-use of screening methods, late presentation, non-acceptance of referral, and lack of communication after referral were some of the major challenges encountered. These underscore the needs for health education and awareness creation, women educational and economic empowerment, legislation against early marriages and in protection of widows, and creation of a well-staffed and well-equipped dedicated gynecologic oncology unit to forestall further referral.

  10. Data acquisition system for a proton imaging apparatus

    CERN Document Server

    Sipala, V; Bruzzi, M; Bucciolini, M; Candiano, G; Capineri, L; Cirrone, G A P; Civinini, C; Cuttone, G; Lo Presti, D; Marrazzo, L; Mazzaglia, E; Menichelli, D; Randazzo, N; Talamonti, C; Tesi, M; Valentini, S

    2009-01-01

    New developments in the proton-therapy field for cancer treatments, leaded Italian physics researchers to realize a proton imaging apparatus consisting of a silicon microstrip tracker to reconstruct the proton trajectories and a calorimeter to measure their residual energy. For clinical requirements, the detectors used and the data acquisition system should be able to sustain about 1 MHz proton rate. The tracker read-out, using an ASICs developed by the collaboration, acquires the signals detector and sends data in parallel to an FPGA. The YAG:Ce calorimeter generates also the global trigger. The data acquisition system and the results obtained in the calibration phase are presented and discussed.

  11. TREATMENT OF SHIN BONE FRACTURES USING EXTERNAL ROD APPARATUSES

    Directory of Open Access Journals (Sweden)

    D. E. Kupkenov

    2010-01-01

    Full Text Available Treatment results of 30 patients with diaphyseal fractures of shin bones are presented. All patients were treated by transosseus osteosynthesis tehnique with rod apparatus developed by author. Good outcome of treatment was received in 28 (93,3% patients, satisfactory - in 2 (6,7% in one - three years after operation. This method of treatment permits to perform a closed accurate reposition of bone fragments, to achieve the stable fixation for the whole period of treatment and to mobilize patients on second day after operation.

  12. Detector apparatus having a hybrid pixel-waveform readout system

    Science.gov (United States)

    Meng, Ling-Jian

    2014-10-21

    A gamma ray detector apparatus comprises a solid state detector that includes a plurality of anode pixels and at least one cathode. The solid state detector is configured for receiving gamma rays during an interaction and inducing a signal in an anode pixel and in a cathode. An anode pixel readout circuit is coupled to the plurality of anode pixels and is configured to read out and process the induced signal in the anode pixel and provide triggering and addressing information. A waveform sampling circuit is coupled to the at least one cathode and configured to read out and process the induced signal in the cathode and determine energy of the interaction, timing of the interaction, and depth of interaction.

  13. New Technology of Low Voltage Electrical Apparatus to Face the 21 Century%面向21世纪的低压电器新技术

    Institute of Scientific and Technical Information of China (English)

    陈德桂

    2001-01-01

    综合国内外低压电器近期发展,提出面向21世纪的低压电器新技术。从智能电器的网络化和信息化、信息技术与虚拟电器、环保电器和电器的高性能、小型化与结构设计现代化等方面进行了探讨。%The development of LV electrical apparatus at home and abroad in recent years was summarized. New technologies of low voltage electrical apparatus to face the 21 century were presented, which includes networked smart apparatus and information smart apparatus, simulation technology and virtual apparatus, environment protection apparatus, high performance, small size and modern structure design.

  14. 21 CFR 864.5240 - Automated blood cell diluting apparatus.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automated blood cell diluting apparatus. 864.5240... § 864.5240 Automated blood cell diluting apparatus. (a) Identification. An automated blood cell diluting apparatus is a fully automated or semi-automated device used to make appropriate dilutions of a blood...

  15. Apparatus Named after Our Academic Ancestors--II

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    2011-01-01

    In my previous article on apparatus named after physicists and physics teachers, I discussed five relatively common pieces of apparatus from the 1875-1910 era. Now I will go back to the 18th and early-19th centuries to discuss eponymous apparatus that we are still using in lecture demonstrations. [For Part I, see EJ912907.

  16. 29 CFR 1926.307 - Mechanical power-transmission apparatus.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Mechanical power-transmission apparatus. 1926.307 Section....307 Mechanical power-transmission apparatus. (a) General requirements. (1) This section covers all... mechanical power transmission apparatus located in basements, towers, and rooms used exclusively for...

  17. 21 CFR 868.5165 - Nitric oxide administration apparatus.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Nitric oxide administration apparatus. 868.5165... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5165 Nitric oxide administration apparatus. (a) Identification. The nitric oxide administration apparatus is a device used to add...

  18. THz Discrimination of materials: demonstration of a bioinspired apparatus based on metasurfaces selective filters

    CERN Document Server

    Carelli1, P; Torrioli, G; Castellano, M G

    2016-01-01

    We present an apparatus for terahertz fingerprint discrimination of materials designed to be fast, simple, compact and economical in order to be suitable for preliminary on-field analysis. The system working principles, bioinspired by the human vision of colors, are based on the use of microfabricated metamaterials selective filters and of a very compact optics based on metallic ellipsoidal mirrors in air. We experimentally demonstrate the operation of the apparatus in discriminating simple substances such as salt, staple foods and grease in an accurate and reproducible manner. We present the system and the obtained results and discuss issues and possible developments.

  19. Pattern and management of sports injuries presented by Lagos state athletes at the 16th National Sports Festival (KADA games 2009 in Nigeria

    Directory of Open Access Journals (Sweden)

    Owoeye Oluwatoyosi BA

    2010-01-01

    Full Text Available Abstract Background There is a dearth of information on the epidemiology of sports injuries in Nigeria. The study was aimed at documenting sports injuries sustained by Lagos state athletes during the 16th National Sports Festival (KADA Games 2009. It was also aimed at providing information on treatments offered to injured athletes. Methods The study was carried out at Amadu Bello Stadium Complex, sporting arena of the Murtala Square and the team Lagos mini clinic. Participants were accredited Lagos state athletes who at one point in time during the games required treatment from any of the members of the medical team. Demographic data of athletes, type of injuries, body parts injured and treatment modalities used were documented and analysed using descriptive statistics. Results Within the period of the games, a total of 140 sports injuries were documented from 132 athletes with an approximate male to female ratio of 2:1 and age ranging from 15-38 years. Most of the injuries reported by the athletes were "minor" injuries. Muscle strain was the most common type of injury (31.4% followed by ligament sprains (22.9%. The lower extremities were the most injured body region accounting for 50% of all injuries. Over 60% of injuries presented by the athletes were from basketball, cricket, hockey, rugby and baseball. Cryotherapy was the most frequently used treatment modality, followed by bandaging and massage with anti-inflammatory gels. Conclusion Establishing injury prevention programmes directed at the lower extremities may help reduce the risk of injuries to the lower extremities. Since cryotherapy was the most used treatment modality, it is suggested that it should be made abundantly available to the medical team preferably in forms of portable cold sprays for easy transportation and application during the games. It is also important that physiotherapists form the core of the medical team since they are trained to apply most of these treatment

  20. Compact test apparatus for evaluation of flow erosion of marine coatings

    Science.gov (United States)

    Debowski, M. A.; Quintana, R.; Lee, H. P.

    2015-10-01

    An apparatus designed and manufactured for evaluation of flow erosion of coatings or layers is presented in this paper. The setup was primarily designed for coatings intended to perform in dynamic marine environments but can be also used for evaluation using fresh water. The concept is based on an in-line flow test cell and modular design allowing good flexibility of varying testing parameters. The flow rate that can be achieved depends on the flow cell geometry and can reach 28 km/h (15 kn) with the presented setup. Temperature may be adjusted between 15 and 35 °C. Particle and metal ion filters are parts of this setup. The dimensions of the apparatus including all components do not exceed 2 m × 2 m × 2 m. The use of the apparatus is illustrated with the results of evaluation of self-polishing anti-fouling coatings and model, silicon wafer grafted layers.

  1. Catholic Church and State in Cuba: past and present relationships Iglesia católica y estado en la República de Cuba: pasado y presente de sus relaciones

    OpenAIRE

    Delia CONTRERAS GARCÍA

    2013-01-01

    After centuries of a deep presence in Cuba, the Catholic Church has always been part of a complex relationship with the political establishment. The break between Church and State that occurred after the Revolution, would soon show the institution’s ability to survive in unfavorable conditions. Now, after more than fifty years of revolutionary experience, the Catholic Church has become the sole internal interlocutor with the regime. The aim of this article is to analyze the process by which t...

  2. Golgi apparatus analyzed by cryo-electron microscopy.

    Science.gov (United States)

    Han, Hong-Mei; Bouchet-Marquis, Cedric; Huebinger, Jan; Grabenbauer, Markus

    2013-10-01

    In 1898, the Golgi apparatus was discovered by light microscopy, and since the 1950s, the ultrastructure composition is known by electron microscopic investigation. The complex three-dimensional morphology fascinated researchers and was sometimes even the driving force to develop novel visualization techniques. However, the highly dynamic membrane systems of Golgi apparatus are delicate and prone to fixation artifacts. Therefore, the understanding of Golgi morphology and its function has been improved significantly with the development of better preparation methods. Nowadays, cryo-fixation is the method of choice to arrest instantly all dynamic and physiological processes inside cells, tissues, and small organisms. Embedded in amorphous ice, such samples can be further processed by freeze substitution or directly analyzed in their fully hydrated state by cryo-electron microscopy and tomography. Even though the overall morphology of vitrified Golgi stacks is comparable to well-prepared and resin-embedded samples, previously unknown structural details can be observed solely based on their native density. At this point, any further improvement of sample preparation would gain novel insights, perhaps not in terms of general morphology, but on fine structural details of this dynamic organelle.

  3. Biocorrosion and biofouling of metals and alloys of industrial usage. present state of the art at the beginning of the new millennium

    Energy Technology Data Exchange (ETDEWEB)

    Videla, H. A.

    2003-07-01

    An overview on the present state of the art on Biocorrosion and Biofouling of metals and alloys of industrial usage is offered on the basis of the experience gathered in our laboratory over 25 years of research. The key concepts to understand the main effects of microorganisms on metal decay are briefly discussed. new trends in monitoring and control strategies to mitigate biocorrosion and biofouling deleterious effects are also described. Several relevant cases of biocorrosion studied by our research group are successively described: i) biocorrosion of aluminum and its alloys by fungal contaminants of jet fuels; ii) Sulfate-reducing bacteria SRB induced corrosion of steel; iii) biocorrosion and biofouling interactions in the marine environment: iv) monitoring strategies for assessing biocorrosion in industrial water systems; v) microbial inhibition of corrosion; vi) use and limitations of electrochemical techniques for evaluating biocorrosion effects. The future perspective of the field is made considering the potential of innovative techniques in microscopy (environmental scanning electron microscopy, confocal scanning laser microscopy, atomic force microscopy), new spectroscopy techniques used for the study of corrosion products and biofilms (energy dispersion X-ray analysis, X-ray photoelectron spectroscopy, electron microprobe analysis) and electrochemistry (electrochemical impedance spectroscopy, electrochemical noise analysis. (Author) 53 refs.

  4. Microgravity Flow Regime Data: Buoyancy and Mixing Apparatus Effects

    Science.gov (United States)

    Shephard, Adam; Best, Frederick

    2010-01-01

    Zero-g two-phase flow data set qualification and flight experiment design have not been standardized and as a result, agreement among researchers has not been reached regarding what experimental conditions adequately approximate those of microgravity. The effects of buoyancy forces and mixing apparatus on the flow regime transitions are presented in this study. The gravity conditions onboard zero-g aircraft are at best 10-3 g which is used to approximate the 10-5 g conditions of microgravity, thus the buoyancy forces present on zero-g aircraft can become significantly large and unrepresentative of microgravity. When buoyancy forces approach those of surface tension forces, buoyancy induced coalescence occurs. When discussing flow regime transitions, these large buoyancy forces lead to flow regime transitions which otherwise would not occur. The buoyancy attributes of the two-phase flow data sets available in the literature are evaluated to determine which data sets exhibit buoyancy induced transitions. Upon comparison of the representative data sets, the affects of different mixing apparatus can be seen in the superficial velocity flow regime maps.

  5. Spectroscopic Chemical Analysis Methods and Apparatus

    Science.gov (United States)

    Hug, William F. (Inventor); Reid, Ray D. (Inventor); Bhartia, Rohit (Inventor); Lane, Arthur L. (Inventor)

    2017-01-01

    Spectroscopic chemical analysis methods and apparatus are disclosed which employ deep ultraviolet (e.g. in the 200 nm to 300 nm spectral range) electron beam pumped wide bandgap semiconductor lasers, incoherent wide bandgap semiconductor light emitting devices, and hollow cathode metal ion lasers to perform non-contact, non-invasive detection of unknown chemical analytes. These deep ultraviolet sources enable dramatic size, weight and power consumption reductions of chemical analysis instruments. In some embodiments, Raman spectroscopic detection methods and apparatus use ultra-narrow-band angle tuning filters, acousto-optic tuning filters, and temperature tuned filters to enable ultra-miniature analyzers for chemical identification. In some embodiments Raman analysis is conducted along with photoluminescence spectroscopy (i.e. fluorescence and/or phosphorescence spectroscopy) to provide high levels of sensitivity and specificity in the same instrument.

  6. PRIMA: An apparatus for medical application

    Energy Technology Data Exchange (ETDEWEB)

    Sipala, V., E-mail: valeria.sipala@ct.infn.it [Dipartimento di Fisica e Astronomia, Universita degli Studi di Catania (Italy); INFN, sezione di Catania (Italy); Brianzi, M. [INFN, sezione di Firenze (Italy); Bruzzi, M. [INFN, sezione di Firenze (Italy); Dipartimento di Energetica, Universita degli Studi di Firenze (Italy); Bucciolini, M. [Dipartimento di Fisiopatologia Clinica, Universita degli Studi di Firenze (Italy); INFN, sezione di Firenze (Italy); Cirrone, G.A.P. [Laboratori Nazionali del Sud-INFN, Catania (Italy); Civinini, C. [INFN, sezione di Firenze (Italy); Cuttone, G. [Laboratori Nazionali del Sud-INFN, Catania (Italy); Lo Presti, D. [Dipartimento di Fisica e Astronomia, Universita degli Studi di Catania (Italy); INFN, sezione di Catania (Italy); Pallotta, S. [Dipartimento di Fisiopatologia Clinica, Universita degli Studi di Firenze (Italy); Randazzo, N. [INFN, sezione di Catania (Italy); Romano, F. [Laboratori Nazionali del Sud-INFN, Catania (Italy); Stancampiano, C. [INFN, sezione di Catania (Italy); Scaringella, M. [INFN, sezione di Firenze (Italy); Dipartimento di Energetica, Universita degli Studi di Firenze (Italy); Talamonti, C. [Dipartimento di Fisiopatologia Clinica, Universita degli Studi di Firenze (Italy); INFN, sezione di Firenze (Italy); Tesi, M. [Dipartimento di Energetica, Universita degli Studi di Firenze (Italy)

    2011-12-01

    In this paper a proton Computed Radiography (pCR) apparatus for medical applications, realized by PRIMA (PRoton IMAging) Italian Collaboration, is described. The system is oriented to acquire tomography images and meets clinical demands for the use of protons in radiotherapy treatments. The approach proposed here is based on 'single proton tracking' method with Most Likely Path (MLP) reconstruction of the single particle. A pCR prototype, with a field of view of about 5 Multiplication-Sign 5 cm{sup 2} and an acquisition time of the order of 10 s (10 kHz, 10{sup 5} events), has been developed and tested with a 62 MeV proton beam at the INFN-Laboratori Nazionali del Sud (LNS). The apparatus architecture will be described and first proton radiographies will be shown.

  7. Method and apparatus for electrospark deposition

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Jeffrey A.; Johnson, Roger N.; Park, Walter R.; Munley, John T.

    2004-12-28

    A method and apparatus for controlling electrospark deposition (ESD) comprises using electrical variable waveforms from the ESD process as a feedback parameter. The method comprises measuring a plurality of peak amplitudes from a series of electrical energy pulses delivered to an electrode tip. The maximum peak value from among the plurality of peak amplitudes correlates to the contact force between the electrode tip and a workpiece. The method further comprises comparing the maximum peak value to a set point to determine an offset and optimizing the contact force according to the value of the offset. The apparatus comprises an electrode tip connected to an electrical energy wave generator and an electrical signal sensor, which connects to a high-speed data acquisition card. An actuator provides relative motion between the electrode tip and a workpiece by receiving a feedback drive signal from a processor that is operably connected to the actuator and the high-speed data acquisition card.

  8. Logging-while-coring method and apparatus

    Science.gov (United States)

    Goldberg, David S.; Myers, Gregory J.

    2007-11-13

    A method and apparatus for downhole coring while receiving logging-while-drilling tool data. The apparatus includes core collar and a retrievable core barrel. The retrievable core barrel receives core from a borehole which is sent to the surface for analysis via wireline and latching tool The core collar includes logging-while-drilling tools for the simultaneous measurement of formation properties during the core excavation process. Examples of logging-while-drilling tools include nuclear sensors, resistivity sensors, gamma ray sensors, and bit resistivity sensors. The disclosed method allows for precise core-log depth calibration and core orientation within a single borehole, and without at pipe trip, providing both time saving and unique scientific advantages.

  9. Ionomer-Membrane Water Processing Apparatus

    Science.gov (United States)

    MacCallum, Taber K. (Inventor); Kelsey, Laura (Inventor)

    2016-01-01

    This disclosure provides water processing apparatuses, systems, and methods for recovering water from wastewater such as urine. The water processing apparatuses, systems, and methods can utilize membrane technology for extracting purified water in a single step. A containment unit can include an ionomer membrane, such as Nafion(Registered Trademark), over a hydrophobic microporous membrane, such as polytetrafluoroethylene (PTFE). The containment unit can be filled with wastewater, and the hydrophobic microporous membrane can be impermeable to liquids and solids of the wastewater but permeable to gases and vapors of the wastewater, and the ionomer membrane can be permeable to water vapor but impermeable to one or more contaminants of the gases and vapors. The containment unit can be exposed to a dry purge gas to maintain a water vapor partial pressure differential to drive permeation of the water vapor, and the water vapor can be collected and processed into potable water.

  10. Filtered cathodic arc deposition apparatus and method

    Science.gov (United States)

    Krauss, Alan R.

    1999-01-01

    A filtered cathodic arc deposition method and apparatus for the production of highly dense, wear resistant coatings which are free from macro particles. The filtered cathodic arc deposition apparatus includes a cross shaped vacuum chamber which houses a cathode target having an evaporable surface comprised of the coating material, means for generating a stream of plasma, means for generating a transverse magnetic field, and a macro particle deflector. The transverse magnetic field bends the generated stream of plasma in the direction of a substrate. Macro particles are effectively filtered from the stream of plasma by traveling, unaffected by the transverse magnetic field, along the initial path of the plasma stream to a macro particle deflector. The macro particle deflector has a preformed surface which deflects macro particles away from the substrate.

  11. Methods and apparatus for coating particulate material

    Science.gov (United States)

    Littman, Howard (Inventor); Plawsky, Joel L. (Inventor); Paccione, John D. (Inventor)

    2012-01-01

    Methods and apparatus for coating particulate material are provided. The apparatus includes a vessel having a top and a bottom, a vertically extending conduit having an inlet in the vessel and an outlet outside of the vessel, a first fluid inlet in the bottom of the vessel for introducing a transfer fluid, a second fluid inlet in the bottom of the vessel for introducing a coating fluid, and a fluid outlet from the vessel. The method includes steps of agitating a material, contacting the material with a coating material, and drying the coating material to produce a coated material. The invention may be adapted to coat aerogel beads, among other materials. A coated aerogel bead and an aerogel-based insulation material are also disclosed.

  12. Apparatus, system, and method for traffic monitoring

    KAUST Repository

    Claudel, Christian G.

    2016-08-25

    An apparatus, system, and method for traffic monitory can have a Lagrangian inertial measurement unit. The Lagrangian inertial measurement unit can have a processor, an accelerometer, a gyroscope, and/or a wireless transmitter. The processor can have an integrated direction cosine matrix. The accelerometer can be configured to measure linear accelerations of a vehicle and/or can communicate measured linear acceleration to the processor. The gyroscope can be configured to measure rotational accelerations of the vehicle and/or can communicate measured rotational acceleration to the processor. The processor can be configured to calculate estimated vehicle speed and/or estimated vehicle attitude. The wireless transmitter can be configured to wirelessly transmit estimated vehicle speed and/or estimated vehicle attitude. The apparatus, system, and method can be integrated with a wireless sensor network.

  13. Present time

    CERN Document Server

    Romero, Gustavo E

    2014-01-01

    The idea of a moving present or `now' seems to form part of our most basic beliefs about reality. Such a present, however, is not reflected in any of our theories of the physical world. I show in this article that presentism, the doctrine that only what is present exists, is in conflict with modern relativistic cosmology and recent advances in neurosciences. I argue for a tenseless view of time, where what we call `the present' is just an emergent secondary quality arising from the interaction of perceiving self-conscious individuals with their environment. I maintain that there is no flow of time, but just an ordered system of events.

  14. Membrane Traffic Within the Golgi Apparatus

    OpenAIRE

    Glick, Benjamin S; Nakano, Akihiko

    2009-01-01

    Newly synthesized secretory cargo molecules pass through the Golgi apparatus while resident Golgi proteins remain in the organelle. However, the pathways of membrane traffic within the Golgi are still uncertain. Most of the available data can be accommodated by the cisternal maturation model, which postulates that Golgi cisternae form de novo, carry the secretory cargoes forward, and ultimately disappear. The entry face of the Golgi receives material that has been exported from transitional E...

  15. Method and apparatus for continuous electrophoresis

    Science.gov (United States)

    Watson, Jack S.

    1992-01-01

    A method and apparatus for conducting continuous separation of substances by electrophoresis are disclosed. The process involves electrophoretic separation combined with couette flow in a thin volume defined by opposing surfaces. By alternating the polarity of the applied potential and producing reciprocating short rotations of at least one of the surfaces relative to the other, small increments of separation accumulate to cause substantial, useful segregation of electrophoretically separable components in a continuous flow system.

  16. Plasma/Neutral-Beam Etching Apparatus

    Science.gov (United States)

    Langer, William; Cohen, Samuel; Cuthbertson, John; Manos, Dennis; Motley, Robert

    1989-01-01

    Energies of neutral particles controllable. Apparatus developed to produce intense beams of reactant atoms for simulating low-Earth-orbit oxygen erosion, for studying beam-gas collisions, and for etching semiconductor substrates. Neutral beam formed by neutralization and reflection of accelerated plasma on metal plate. Plasma ejected from coaxial plasma gun toward neutralizing plate, where turned into beam of atoms or molecules and aimed at substrate to be etched.

  17. Continuous microwave regeneration apparatus for absorption media

    Science.gov (United States)

    Smith, Douglas D.

    1999-01-01

    A method and apparatus for continuously drying and regenerating ceramic beads for use in process gas moisture drying operations such as glove boxes. A microwave energy source is coupled to a process chamber to internally heat the ceramic beads and vaporize moisture contained therein. In a preferred embodiment, the moisture laden ceramic beads are conveyed toward the microwave source by a screw mechanism. The regenerated beads flow down outside of the screw mechanism and are available to absorb additional moisture.

  18. Coating and curing apparatus and methods

    Energy Technology Data Exchange (ETDEWEB)

    Brophy, Brenor L.; Gonsalves, Peter R.; Maghsoodi, Sina; Colson, Thomas E.; Yang, Yu S.; Abrams, Ze' ev R.

    2016-04-19

    Disclosed is a coating apparatus including flow coating and roll-coating that may be used for uniform sol-gel coating of substrates such as glass, solar panels, windows or part of an electronic display. Also disclosed are methods for substrate preparation, flow coating and roll coating. Lastly, systems and methods for curing sol-gel coatings deposited onto the surface of glass substrates using high temperature air-knives, infrared emitters and direct heat applicators are disclosed.

  19. Ultrasonic stir welding process and apparatus

    Science.gov (United States)

    Ding, R. Jeffrey (Inventor)

    2009-01-01

    An ultrasonic stir welding device provides a method and apparatus for elevating the temperature of a work piece utilizing at least one ultrasonic heater. Instead of relying on a rotating shoulder to provide heat to a workpiece an ultrasonic heater is utilized to provide ultrasonic energy to the workpiece. A rotating pin driven by a motor assembly performs the weld on the workpiece. A handheld version can be constructed as well as a fixedly mounted embodiment.

  20. Thermal response simulation for tuning PID controllers in a 1016 mm guarded hot plate apparatus.

    Science.gov (United States)

    Thomas, William C; Zarr, Robert R

    2011-07-01

    A mathematical model has been developed and used to simulate the controlled thermal performance of a large guarded hot-plate apparatus. This highly specialized apparatus comprises three interdependent components whose temperatures are closely controlled in order to measure the thermal conductivity of insulation materials. The simulation model was used to investigate control strategies and derive controller gain parameters that are directly transferable to the actual instrument. The simulations take orders-of-magnitude less time to carry out when compared to traditional tuning methods based on operating the actual apparatus. The control system consists primarily of a PC-based PID control algorithm that regulates the output voltage of programmable power amplifiers. Feedback parameters in the form of controller gains are required for the three heating circuits. An objective is to determine an improved set of gains that meet temperature control criteria for testing insulation materials of interest. The analytical model is based on aggregated thermal capacity representations of the primary components and includes the same control algorithm as used in the actual hot-plate apparatus. The model, accounting for both thermal characteristics and temperature control, was validated by comparisons with test data. The tuning methodology used with the simulation model is described and results are presented. The resulting control algorithm and gain parameters have been used in the actual apparatus without modification during several years of testing materials over wide ranges of thermal conductivity, thickness, and insulation resistance values.

  1. Monoascorbate free radical-dependent oxidation-reduction reactions of liver Golgi apparatus membranes.

    Science.gov (United States)

    Navas, Placido; Sun, Iris; Crane, Frederick L; Morré, Dorothy M; Morré, D James

    2010-04-01

    Golgi apparatus from rat liver contain an ascorbate free radical oxidoreductase that oxidizes NADH at neutral pH with monodehydroascorbate as acceptor to generate a membrane potential. At pH 5.0, the reverse reaction occurs from NAD(+). The electron spin resonance signal of the ascorbate-free radical and its disappearance upon the addition of NADH (pH 7) or NAD(+) (pH 5.0) confirms monodehydroascorbate involvement. Location of monodehydroascorbate both external to and within Golgi apparatus compartments is suggested from energization provided by inward or outward flux of electrons across the Golgi apparatus membranes. The isolated membranes are sealed, oriented cytoplasmic side out and impermeable to NAD(+) and ascorbate. NAD(+) derived through the action of Golgi apparatus beta-NADP phosphohydrolase is simultaneously reduced to NADH with monodehydroascorbate present. The response of the NADH- (NAD(+)-) ascorbate free radical oxidoreductase system to pH in Golgi apparatus provides a simple regulatory mechanism to control vesicle acidification.

  2. A new two-dimensional experimental apparatus for electrochemical remediation processes☆

    Institute of Scientific and Technical Information of China (English)

    Yingying Gu; Rongbing Fu; Hongjiang Li; Hui An

    2015-01-01

    Electrochemical extraction of contaminants from soils is a promising soil decontamination technology. Various experiments have been conducted to study electrochemical reactions and geochemical processes in the electro-chemical extraction using different experimental apparatuses. This paper presents the development of a new closed two-dimensional (2D) apparatus that can better simulate the field application of the technology and ac-curately monitor the most important electrochemical parameters to understand the process. The innovative fea-tures of the new apparatus include the outer and inner electrodes designed to apply a non-uniform electrical field across the specimen as in the field electrochemical remediation process, the probes installed to measure the 2D distribution of electrical voltage, and the gas and fluid volume measurement devices used to accurately monitor the gas generation and electroosmotic flow rates at both electrodes as a function of time. The components of this new apparatus and the features of each component are described. The operating procedure and some typical re-sults from three experiments with the apparatus are demonstrated. The results show that the variation of the gas generation rate is in good agreement with the electric current. Their relation provides a valid evaluation for elec-trochemical behavior of the system and Faraday's laws of electrolysis. The 2D profiles of cadmium concentration and voltage distribution at the end of the experiment reveal the great effects of a non-uniform electrical field on the contaminant mobilization.

  3. Object Tracking Vision System for Mapping the UCN τ Apparatus Volume

    Science.gov (United States)

    Lumb, Rowan; UCNtau Collaboration

    2016-09-01

    The UCN τ collaboration has an immediate goal to measure the lifetime of the free neutron to within 0.1%, i.e. about 1 s. The UCN τ apparatus is a magneto-gravitational ``bottle'' system. This system holds low energy, or ultracold, neutrons in the apparatus with the constraint of gravity, and keeps these low energy neutrons from interacting with the bottle via a strong 1 T surface magnetic field created by a bowl-shaped array of permanent magnets. The apparatus is wrapped with energized coils to supply a magnetic field throughout the ''bottle'' volume to prevent depolarization of the neutrons. An object-tracking stereo-vision system will be presented that precisely tracks a Hall probe and allows a mapping of the magnetic field throughout the volume of the UCN τ bottle. The stereo-vision system utilizes two cameras and open source openCV software to track an object's 3-d position in space in real time. The desired resolution is +/-1 mm resolution along each axis. The vision system is being used as part of an even larger system to map the magnetic field of the UCN τ apparatus and expose any possible systematic effects due to field cancellation or low field points which could allow neutrons to depolarize and possibly escape from the apparatus undetected. Tennessee Technological University.

  4. A cryogenic tensile testing apparatus for micro-samples cooled by miniature pulse tube cryocooler

    Science.gov (United States)

    Chen, L. B.; Liu, S. X.; Gu, K. X.; Zhou, Y.; Wang, J. J.

    2015-12-01

    This paper introduces a cryogenic tensile testing apparatus for micro-samples cooled by a miniature pulse tube cryocooler. At present, tensile tests are widely applied to measure the mechanical properties of materials; most of the cryogenic tensile testing apparatus are designed for samples with standard sizes, while for non-standard size samples, especially for microsamples, the tensile testing cannot be conducted. The general approach to cool down the specimens for tensile testing is by using of liquid nitrogen or liquid helium, which is not convenient: it is difficult to keep the temperature of the specimens at an arbitrary set point precisely, besides, in some occasions, liquid nitrogen, especially liquid helium, is not easily available. To overcome these limitations, a cryogenic tensile testing apparatus cooled by a high frequency pulse tube cryocooler has been designed, built and tested. The operating temperatures of the developed tensile testing apparatus cover from 20 K to room temperature with a controlling precision of ±10 mK. The apparatus configurations, the methods of operation and some cooling performance will be described in this paper.

  5. Key point in dermoscopic differentiation between early nail apparatus melanoma and benign longitudinal melanonychia.

    Science.gov (United States)

    Koga, Hiroshi; Saida, Toshiaki; Uhara, Hisashi

    2011-01-01

    Longitudinal melanonychia presents in various conditions including neoplastic and reactive disorders. It is much more frequently seen in non-Caucasians than Caucasians. While most cases of nail apparatus melanoma start as longitudinal melanonychia, melanocytic nevi of the nail apparatus also typically accompany longitudinal melanonychia. Identifying the suspicious longitudinal melanonychia is therefore an important task for dermatologists. Dermoscopy provides useful information for making this decision. The most suspicious dermoscopic feature of early nail apparatus melanoma is irregular lines on a brown background. Evaluation of the irregularity may be rather subjective, but through experience, dermatologists can improve their diagnostic skills of longitudinal melanonychia, including benign conditions showing regular lines. Other important dermoscopic features of early nail apparatus melanoma are micro-Hutchinson's sign, a wide pigmented band, and triangular pigmentation on the nail plate. Although there is as yet no solid evidence concerning the frequency of dermoscopic follow up, we recommend checking the suspicious longitudinal melanonychia every 6 months. Moreover, patients with longitudinal melanonychia should be asked to return to the clinic quickly if the lesion shows obvious changes. Diagnosis of amelanotic or hypomelanotic melanoma affecting the nail apparatus is also challenging, but melanoma should be highly suspected if remnants of melanin granules are detected dermoscopically.

  6. Ca(2+) signalling in the Golgi apparatus.

    Science.gov (United States)

    Pizzo, Paola; Lissandron, Valentina; Capitanio, Paola; Pozzan, Tullio

    2011-08-01

    The Golgi apparatus plays a central role in lipid and protein post-translational modification and sorting. Morphologically the organelle is heterogeneous and it is possible to distinguish stacks of flat cysternae (cis- and medial Golgi), tubular-reticular networks and vesicles (trans-Golgi). These morphological differences parallel a distinct functionality with a selective distribution and complementary roles of the enzymes found in the different compartments. The Golgi apparatus has been also shown to be involved in Ca(2+) signalling: it is indeed endowed with Ca(2+) pumps, Ca(2+) release channels and Ca(2+) binding proteins and is thought to participate in determining the spatio-temporal complexity of the Ca(2+) signal within the cell, though this role is still poorly understood. Recently, it has been demonstrated that the organelle is heterogeneous in terms of Ca(2+) handling and selective reduction of Ca(2+) concentration, both in vitro and in a genetic human disease, within one of its sub-compartment results in alterations of protein trafficking within the secretory pathway and of the entire Golgi morphology. In this paper we review the available information on the Ca(2+) toolkit within the Golgi, its heterogeneous distribution in the organelle sub-compartments and discuss the implications of these characteristics for the physiopathology of the Golgi apparatus.

  7. An apparatus for studying spallation neutrons in the Aberdeen Tunnel laboratory

    CERN Document Server

    Blyth, S C; Chen, X C; Chu, M C; Hahn, R L; Ho, T H; Hsiung, Y B; Hu, B Z; Kwan, K K; Kwok, M W; Kwok, T; Lau, Y P; Lee, K P; Leung, J K C; Leung, K Y; Lin, G L; Lin, Y C; Luk, K B; Luk, W H; Ngai, H Y; Ngan, S Y; Pun, C S J; Shih, K; Tam, Y H; Tsang, R H M; Wang, C H; Wong, C M; Wong, H L; Wong, H H C; Wong, K K; Yeh, M

    2013-01-01

    In this paper, we describe the design, construction and performance of an apparatus installed in the Aberdeen Tunnel laboratory in Hong Kong for studying spallation neutrons induced by cosmic-ray muons under a vertical rock overburden of 611 meter water equivalent (m.w.e.). The apparatus comprises of six horizontal layers of plastic-scintillator hodoscopes for determining the direction and position of the incident cosmic-ray muons. Sandwiched between the hodoscope planes is a neutron detector filled with 650 kg of liquid scintillator doped with about 0.06% of Gadolinium by weight for improving the e?ciency of detecting the spallation neutrons. Performance of the apparatus is also presented.

  8. Atom chip apparatus for experiments with ultracold rubidium and potassium gases

    Energy Technology Data Exchange (ETDEWEB)

    Ivory, M. K.; Ziltz, A. R.; Fancher, C. T.; Pyle, A. J.; Sensharma, A.; Chase, B.; Field, J. P.; Garcia, A.; Aubin, S., E-mail: saaubi@wm.edu [Department of Physics, College of William and Mary, Williamsburg, Virginia 23187 (United States); Jervis, D. [Department of Physics, University of Toronto, Toronto, Ontario M5S 1A7 (Canada)

    2014-04-15

    We present a dual chamber atom chip apparatus for generating ultracold {sup 87}Rb and {sup 39}K atomic gases. The apparatus produces quasi-pure Bose-Einstein condensates of 10{sup 4} {sup 87}Rb atoms in an atom chip trap that features a dimple and good optical access. We have also demonstrated production of ultracold {sup 39}K and subsequent loading into the chip trap. We describe the details of the dual chamber vacuum system, the cooling lasers, the magnetic trap, the multicoil magnetic transport system, the atom chip, and two optical dipole traps. Due in part to the use of light-induced atom desorption, the laser cooling chamber features a sufficiently good vacuum to also support optical dipole trap-based experiments. The apparatus is well suited for studies of atom-surface forces, quantum pumping and transport experiments, atom interferometry, novel chip-based traps, and studies of one-dimensional many-body systems.

  9. Extensor-mechanism-reconstruction of the knee joint after traumatic loss of the entire extensor apparatus.

    Science.gov (United States)

    Raschke, D; Schüttrumpf, J P; Tezval, M; Stürmer, K M; Balcarek, P

    2014-06-01

    Injuries to the extensor apparatus of the knee joint have an incidence of 0.5% to 6%. Although previous studies have described the advantages and disadvantages of operative treatment in cases of patellar tendon rupture, patella fracture or quadriceps tendon lesions, a report on the reconstruction of the extensor apparatus after traumatic loss of the patella, the patellar tendon, the tibial tuberosity and parts of the lateral quadriceps muscle is absent from the literature. We present the case of a young motorcyclist who underwent a reconstruction of the extensor apparatus using autologous tendon grafts. At a 24-month follow-up, the patient has a nearly physiological range of motion of the knee joint and is able to cope well with everyday life.

  10. Secrets and lies: "selective openness" in the apparatus of animal experimentation.

    Science.gov (United States)

    Holmberg, Tora; Ideland, Malin

    2012-04-01

    Researchers and other (human) actors within the apparatus of animal experimentation find themselves in a tight corner. They rely on public acceptance to promote their legitimacy and to receive funding. At the same time, those working with animal experimentation take risks by going public, fearing that the public will misunderstand their work and animal rights activists may threaten them. The dilemma that emerges between openness and secrecy is fairly prevalent in scientific culture as a whole, but the apparatus of animal experimentation presents specific patterns of technologies of secrets. The aim of the paper is to describe and analyse the meanings of secrets and openness in contemporary animal experimentation. We suggest that these secrets--or "selective openness"--can be viewed as grease in the apparatus of animal experimentation, as a unifying ingredient that permits maintenance of status quo in human/animal relations and preserves existing institutional public/ science relations.

  11. Atom chip apparatus for experiments with ultracold rubidium and potassium gases.

    Science.gov (United States)

    Ivory, M K; Ziltz, A R; Fancher, C T; Pyle, A J; Sensharma, A; Chase, B; Field, J P; Garcia, A; Jervis, D; Aubin, S

    2014-04-01

    We present a dual chamber atom chip apparatus for generating ultracold (87)Rb and (39)K atomic gases. The apparatus produces quasi-pure Bose-Einstein condensates of 10(4) (87)Rb atoms in an atom chip trap that features a dimple and good optical access. We have also demonstrated production of ultracold (39)K and subsequent loading into the chip trap. We describe the details of the dual chamber vacuum system, the cooling lasers, the magnetic trap, the multicoil magnetic transport system, the atom chip, and two optical dipole traps. Due in part to the use of light-induced atom desorption, the laser cooling chamber features a sufficiently good vacuum to also support optical dipole trap-based experiments. The apparatus is well suited for studies of atom-surface forces, quantum pumping and transport experiments, atom interferometry, novel chip-based traps, and studies of one-dimensional many-body systems.

  12. Apparatus for use in examining the lattice of a semiconductor wafer by X-ray diffraction

    Science.gov (United States)

    Parker, D. L.; Porter, W. A. (Inventor)

    1978-01-01

    An improved apparatus for examining the crystal lattice of a semiconductor wafer utilizing X-ray diffraction techniques was presented. The apparatus is employed in a method which includes the step of recording the image of a wafer supported in a bent configuration conforming to a compound curve, produced through the use of a vacuum chuck provided for an X-ray camera. The entire surface thereof is illuminated simultaneously by a beam of incident X-rays which are projected from a distant point-source and satisfy conditions of the Bragg Law for all points on the surface of the water.

  13. Application of ASTM E-1559 Apparatus to Study H2O Desorption

    Science.gov (United States)

    Woronowicz, Michael; Perry, Radford, III; Meadows, George A.

    2015-01-01

    The NASA James Webb Space Telescope project identified a need to measure water vapor desorption from cryogenic surfaces in order to validate predictions of spacecraft design performance. A review of available scientific literature indicated no such measurements had been reported below 131 K. Contamination control personnel at NASA Goddard Space Flight Center recognized the possibility they readily possessed the means to collect these measurements at lower temperatures using an existing apparatus commonly employed for making outgassing observations. This presentation will relate how the ASTM E-1559 Molekit apparatus was used without physical modification to measure water vapor sublimation down to 120 K and compare this data to existing equilibrium vapor pressure models.

  14. "FACILS 2014: Microbially-driven facilitation systems in environmental biotechnology" (hereafter "FACILS") presented here by the European Commission (EC)-United States (US) Task Force on Biotechnology Research

    Energy Technology Data Exchange (ETDEWEB)

    Methe, Barbara

    2016-02-03

    As we enter the 21st century, the sustainability of the biosphere is a global challenge that can best be met with a global response. This includes how we train and promote our next generation of research scientists in the emerging arenas of genome-enabled biology and a bio-based economy. It is this fundamental issue that formed the motivation for designing and conducting a shortcourse entitled “FACILIS 2014: Microbially-driven facilitation systems in environmental biotechnology” (hereafter “FACILIS”) presented here by the European Commission (EC)-United States (US) Task Force on Biotechnology Research. This WG was established in 1994 under the umbrella of the US-EC Task Force on Biotechnology Research, a transatlantic collaborative group overseen by the US Office of Science and Technology Policy (OSTP) and the EC. The Environmental Biotechnology Working Group maintains several goals, including establishing research links between scientists in EU countries and the US and fostering the careers of junior scientists from both sides of the Atlantic to the global nature of scientific cooperation. To that end, a shortcourse was held at the University of Milan in Italy on July 12-25 2014 organized around cross-cutting themes of genomic science and designed to attract a stellar group of interdisciplinary early carrier researchers. A total of 22 students, 10 from the US and 12 from the EU participated. The course provided them with hands-on experience with the latest scientific methods in genomics and bioinformatics; using a format that combines lectures, laboratory research and field work with the final goal to enable researchers to finally turn data into knowledge.

  15. Authenticity and conservation state of art works: the market and auction houses & Presentation of the historical-technical Journal “Conservation Science in Cultural Heritage"

    Directory of Open Access Journals (Sweden)

    Salvatore Lorusso

    2008-04-01

    Full Text Available The title Authenticity and conservation state of art works: The market and auction houses mirrors the particular status of confusion and instability in which the auction houses – find themselves – nowadays. It is an international situation of existential and economic crisis in which humanity appears to be excited and schizophrenic. This lecture is part of a series all dedicated to various aspects of art, with a particular focus on the great Italian artist Giorgio Morandi. A good selection of his works is currently displayed at the Metropolitan Museum of Art in New York. Giorgio Morandi conceived art as a “practice of silence”, where his “still life” functioned as a filter to observe the world outside his small cloistered art studio. By emphasizing the importance of weight and gravity with grace and attention, this artist can therefore teach us how important it is to judge a piece of art not only subjectively – giving greatest relevance to the satisfaction of individual aesthetical standards – but also objectively – where the techniques and the materials utilized assume the greatest significance. This allows the estimator to estimate correctly their economic and financial value. The second part of the lecture consists in the presentation of the historical-technical journal Conservation Science in Cultural Heritage. It represents an emblematic gathering of experts, symbolizing therefore a necessary encounter among people with different cultural backgrounds, experiences and skills. They meet to address and discuss issues related to their common field of study, the Cultural Heritage sector. This jolts, as it can be imagined, American art critics. They often lack social criticism showing them to be too focused on aesthetics and elegance of form. The consequent question arises: is this really true?

  16. Assessment of the risk status of pregnant women presenting for antenatal care in a rural health facility in Ebonyi State, South Eastern Nigeria

    Directory of Open Access Journals (Sweden)

    Patrick Gold Oyibo

    2011-01-01

    Full Text Available Background: Nigeria has one of the worst maternal and child health indices globally. Aims: The objective of this study was to assess the risk status of pregnant women presenting for antenatal care in a rural health facility in Ebonyi State, South East Nigeria. Subjects and Method: This was a cross-sectional descriptive study of pregnant women selected by systematic random sampling. The study instrument was a pre-tested semi-structured interviewer-administered questionnaire. Result: The age range of the women in the study was 16-43 years. The mean age was 25.3 ± 1.3 years. According to the scoring system used, about one-fourth of the women (26% had a high risk pregnancy while about a tenth (9.1% had very high risk pregnancy. The vast majority of the women with at-risk pregnancies registered for antenatal care late: 58.9 % registered for antenatal care in the second trimester and 37.0 % registered for antenatal care in the third trimester of pregnancy. Of the women with an at-risk pregnancy, 79.5% had their last delivery at home and 67.1 % of them preferred to deliver at home in their current pregnancies. Conclusion: This study revealed that a substantial proportion of rural women with at-risk pregnancies go through their pregnancy period without significant modern antenatal care. The local government health department should intensify efforts through health enlightenment campaigns to educate rural pregnant women of the benefits of utilizing modern antenatal care services.

  17. Apparatus and techniques for measuring bedload

    Science.gov (United States)

    Hubbell, David Wellington

    1964-01-01

    The need for accurate determinations of the total sediment discharge of particles of bedload size has prompted this investigation of available and possible measuring apparatus and procedures. The accuracy of measurements of sediment discharge made with trap-type samplers is affected by the variability of sampler efficiency, by the oscillatory variation of bedload discharge, and by sampler placement. Equations that were developed for determining total discharge from measured bedioad discharge and measured suspended-sediment discharge are simplest if the bedload apparatus measures only the true bedload. Early bedload samplers are generally unsatisfactory. Recently developed or suggested apparatus include various improved samplers of the pressure-difference type, a pumping sampler, a magnetic sampler, acoustical instruments that measure the magnitude of the sound of particle collisions, an ultrasonic bedload sampler designed to measure and integrate electronically the concentration and velocity, and a tiltmeter designed to measure the total sediment discharge from the ground tilt that results from the passage of flow. All the pressure-difference samplers are improvements over early samplers, but none are void of the inherent shortcomings of trap-type apparatus; probably the Sphinx (Dutch) and VUV (Hungarian) samplers are the most satisfactory. The acoustical instruments are capable of measuring only the relative discharge. The ultrasonic sampler and the tiltmeter are not adequate without further development. Some new possible apparatus and means for measuring or aiding in measuring bedload discharge are small pit samplers, ultrasonic sounders, pressure transducers, and photography. A small pit sampler for measuring bedload discharge was designed to provide self-placement and portability ; however, its practicability and efficiency are undetermined. Exploratory films show that by using slowmotion photography the discharge of particles larger than about pea size can be

  18. CATCHY PRESENTATIONS

    DEFF Research Database (Denmark)

    Eriksen, Kaare; Tollestrup, Christian; Ovesen, Nis

    2011-01-01

    An important competence for designers is the ability to communicate and present ideas and proposals for customers, partners, investors and colleagues. The Pecha Kucha principle, developed by Astrid Klein and Mark Dytham, has become a widely used and easy format for the presentation of new concepts...

  19. Preliminary Results from the Large Volume Torsion (LVT) Deformation Apparatus

    Science.gov (United States)

    Cross, A. J.; Couvy, H.; Skemer, P. A.

    2015-12-01

    We present preliminary results from the Large Volume Torsion (LVT) apparatus, currently under development in the rock deformation lab at Washington University in St. Louis. The LVT is designed to deform disk-shaped samples (~4 mm in diameter) in torsion at lower-crustal to upper-mantle pressure and temperature conditions. Conceptually, the LVT complements and is similar in design to the Rotational Drickamer Apparatus (RDA) (Yamakazi & Karato, 2001), which deforms smaller samples at higher pressures. As part of our recent development efforts, benchmarking experiments were performed on Carrara marble. Samples were deformed in torsion at a strain rate of ~5 x 10-5 s-1 to moderate shear strains (γ ≤ 10) under lower crustal conditions (800°C, 2 GPa confining pressure). Microstructural observations from optical microscopy and electron backscatter diffraction (EBSD) show evidence for relict grain elongation and alignment; an increase in calcite twin density; and grain size reduction concurrent with recrystallized grain nucleation. Microstructural observations are comparable to data obtained from previous studies at lower pressure (e.g. Barnhoorn et al., 2004), confirming that the LVT provides reliable microstructural results.

  20. Easily usable human-device interface for microwave therapy apparatus

    Directory of Open Access Journals (Sweden)

    Vasile Surducan

    2015-01-01

    Full Text Available In this paper we investigate the possibility of using a large dot matrix LCD (Liquid Crystal Display as the essential part of a low cost, user friendly human-device interface which is driving a microwave diathermy medical apparatus. The human-device interface uses only four buttons with multiple functionalities, an analog encoder and the said dot matrix LCD. The interface is a part of the embedded system that drives the entire unit, as a stand alone hardware and complex firmware program. This interface can handle the medical treatment parameters in an ergonomic and simple way. The human-device interface has been designed in agreement with the EN60601-1 and EN60601-1-4 requirements using “the simple to complex” writing and validation algorithm. The interface has been manufactured as prototype and tested on our own proprietary microwave hyperthermia and diathermy device and proves to be intuitive and easy to use. The human-device interface firmware is portable to other scientific apparatus as well; however, a reconfiguration of all displayed information is necessary, depending on the purpose of the served equipment. Compared with a colour graphic LCD equipped with touch screen, the interface presented here is definitely less expensive, can be implemented faster and uses  less hardware resources.

  1. Information Presentation

    Science.gov (United States)

    Holden, Kritina L.; Thompson, Shelby G.; Sandor, Aniko; McCann, Robert S.; Kaiser, Mary K.; Adelstein, Barnard D.; Begault, Durand R.; Beutter, Brent R.; Stone, Leland S.; Godfroy, Martine

    2009-01-01

    The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. In addition to addressing display design issues associated with information formatting, style, layout, and interaction, the Information Presentation DRP is also working toward understanding the effects of extreme environments encountered in space travel on information processing. Work is also in progress to refine human factors-based design tools, such as human performance modeling, that will supplement traditional design techniques and help ensure that optimal information design is accomplished in the most cost-efficient manner. The major areas of work, or subtasks, within the Information Presentation DRP for FY10 are: 1) Displays, 2) Controls, 3) Procedures and Fault Management, and 4) Human Performance Modeling. The poster will highlight completed and planned work for each subtask.

  2. Information Presentation

    Science.gov (United States)

    Holden, K.L.; Boyer, J.L.; Sandor, A.; Thompson, S.G.; McCann, R.S.; Begault, D.R.; Adelstein, B.D.; Beutter, B.R.; Stone, L.S.

    2009-01-01

    The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. The major areas of work, or subtasks, within this DRP are: 1) Displays, 2) Controls, 3) Electronic Procedures and Fault Management, and 4) Human Performance Modeling. This DRP is a collaborative effort between researchers at Johnson Space Center and Ames Research Center.

  3. Catholic Church and State in Cuba: past and present relationships Iglesia católica y estado en la República de Cuba: pasado y presente de sus relaciones

    Directory of Open Access Journals (Sweden)

    Delia CONTRERAS GARCÍA

    2013-06-01

    Full Text Available After centuries of a deep presence in Cuba, the Catholic Church has always been part of a complex relationship with the political establishment. The break between Church and State that occurred after the Revolution, would soon show the institution’s ability to survive in unfavorable conditions. Now, after more than fifty years of revolutionary experience, the Catholic Church has become the sole internal interlocutor with the regime. The aim of this article is to analyze the process by which the Cuban Catholic Church has managed its relations with the Castro regime, balancing its pastoral mission with its social responsibilities, that has been increasing as new factors emerged, on both the national stage and on the International Relations front.Tras siglos de arraigo en este país caribeño, el catolicismo cubano ha estado siempre condicionado por unas relaciones complejas con el poder político. La ruptura entre la Iglesia y el Estado, acaecida poco después del triunfo revolucionario, pondría rápidamente de manifiesto la capacidad de supervivencia de esta institución en circunstancias desfavorables. Cuando han transcurrido más de cincuenta años de experiencia revolucionaria, la Iglesia Católica se ha convertido en el único interlocutor interno del régimen. El objetivo de este artículo es analizar el proceso mediante el cual la Iglesia cubana ha gestionado sus relaciones con el castrismo, conjugando su misión pastoral con una función social que se ha ido incrementando a medida que emergían nuevos factores, tanto en el ámbito nacional como en el de las Relaciones Internacionales.

  4. Methods, systems and apparatus for adjusting modulation index to improve linearity of phase voltage commands

    Energy Technology Data Exchange (ETDEWEB)

    Gallegos-Lopez, Gabriel; Perisic, Milun; Kinoshita, Michael H.

    2017-03-14

    Embodiments of the present invention relate to methods, systems and apparatus for controlling operation of a multi-phase machine in a motor drive system. The disclosed embodiments provide a mechanism for adjusting modulation index of voltage commands to improve linearity of the voltage commands.

  5. Apparatus and methods for packaging and storing moisture sensitive products in resealable pouches

    DEFF Research Database (Denmark)

    2006-01-01

    The present invention relates to apparatus and methods for storing moisture-sensitive products such as moisture-curable orthopedic splinting/casting product, in flexible, preferably elongated, pouches. The product is folded into a repeating series of discrete sections where each section has...

  6. Apparatus for the measurement of electrical resistivity, Seebeck coefficient, and thermal conductivity of thermoelectric materials between 300 K and 12 K.

    Science.gov (United States)

    Martin, Joshua; Nolas, George S

    2016-01-01

    We have developed a custom apparatus for the consecutive measurement of the electrical resistivity, the Seebeck coefficient, and the thermal conductivity of materials between 300 K and 12 K. These three transport properties provide for a basic understanding of the thermal and electrical properties of materials. They are of fundamental importance in identifying and optimizing new materials for thermoelectric applications. Thermoelectric applications include waste heat recovery for automobile engines and industrial power generators, solid-state refrigeration, and remote power generation for sensors and space probes. The electrical resistivity is measured using a four-probe bipolar technique, the Seebeck coefficient is measured using the quasi-steady-state condition of the differential method in a 2-probe arrangement, and the thermal conductivity is measured using a longitudinal, multiple gradient steady-state technique. We describe the instrumentation and the measurement uncertainty associated with each transport property, each of which is presented with representative measurement comparisons using round robin samples and/or certified reference materials. Transport properties data from this apparatus have supported the identification, development, and phenomenological understanding of novel thermoelectric materials.

  7. Apparatus for the measurement of electrical resistivity, Seebeck coefficient, and thermal conductivity of thermoelectric materials between 300 K and 12 K

    Science.gov (United States)

    Martin, Joshua; Nolas, George S.

    2016-01-01

    We have developed a custom apparatus for the consecutive measurement of the electrical resistivity, the Seebeck coefficient, and the thermal conductivity of materials between 300 K and 12 K. These three transport properties provide for a basic understanding of the thermal and electrical properties of materials. They are of fundamental importance in identifying and optimizing new materials for thermoelectric applications. Thermoelectric applications include waste heat recovery for automobile engines and industrial power generators, solid-state refrigeration, and remote power generation for sensors and space probes. The electrical resistivity is measured using a four-probe bipolar technique, the Seebeck coefficient is measured using the quasi-steady-state condition of the differential method in a 2-probe arrangement, and the thermal conductivity is measured using a longitudinal, multiple gradient steady-state technique. We describe the instrumentation and the measurement uncertainty associated with each transport property, each of which is presented with representative measurement comparisons using round robin samples and/or certified reference materials. Transport properties data from this apparatus have supported the identification, development, and phenomenological understanding of novel thermoelectric materials.

  8. Inspection apparatus and replaceable door for a vacuum chamber of such an inspection apparatus and a method for operating an inspection apparatus

    NARCIS (Netherlands)

    Kruit, P.; Hoogenboom, J.P.; Zonnevylle, A.C.

    2012-01-01

    An inspection apparatus is provided comprising in combination at least an optical microscope and an ion- or electron microscope equipped with a source for emitting a primary beam of radiation to a sample in a sample holder. The apparatus may comprise a detector for detection of secondary radiation b

  9. Physical Modelling Of The Steel Flow In RH Apparatus

    Directory of Open Access Journals (Sweden)

    Pieprzyca J.

    2015-09-01

    Full Text Available The efficiency of vacuum steel degassing using RH methods depends on many factors. One of the most important are hydrodynamic processes occurring in the ladle and vacuum chamber. It is always hard and expensive to determine the flow character and the way of steel mixing in industrial unit; thus in this case, methods of physical modelling are applied. The article presents the results of research carried out on the water physical model of RH apparatus concerning the influence of the flux value of inert gas introduced through the suck legs on hydrodynamic conditions of the process. Results of the research have visualization character and are presented graphically as a RTD curves. The main aim of such research is to optimize the industrial vacuum steel degassing process by means of RH method.

  10. Experimental apparatus to test air trap valves

    Science.gov (United States)

    Lemos De Lucca, Y. de F.; de Aquino, G. A.; Filho, J. G. D.

    2010-08-01

    It is known that the presence of trapped air within water distribution pipes can lead to irregular operation or even damage to the distribution systems and their components. The presence of trapped air may occur while the pipes are being filled with water, or while the pumping systems are in operation. The formation of large air pockets can produce the water hammer phenomenon, the instability and the loss of pressure in the water distribution networks. As a result, it can overload the pumps, increase the consumption of electricity, and damage the pumping system. In order to avoid its formation, all of the trapped air should be removed through "air trap valves". In Brazil, manufacturers frequently have unreliable sizing charts, which cause malfunctioning of the "air trap valves". The result of these malfunctions causes accidents of substantial damage. The construction of a test facility will provide a foundation of technical information that will be used to help make decisions when designing a system of pipelines where "air trap valves" are used. To achieve this, all of the valve characteristics (geometric, mechanic, hydraulic and dynamic) should be determined. This paper aims to describe and analyze the experimental apparatus and test procedure to be used to test "air trap valves". The experimental apparatus and test facility will be located at the University of Campinas, Brazil at the College of Civil Engineering, Architecture, and Urbanism in the Hydraulics and Fluid Mechanics laboratory. The experimental apparatus will be comprised of various components (pumps, steel pipes, butterfly valves to control the discharge, flow meter and reservoirs) and instrumentation (pressure transducers, anemometer and proximity sensor). It should be emphasized that all theoretical and experimental procedures should be defined while taking into consideration flow parameters and fluid properties that influence the tests.

  11. Experimental apparatus to test air trap valves

    Energy Technology Data Exchange (ETDEWEB)

    Lemos De Lucca, Y de F [CTH-DAEE-USP/FAAP/UNICAMP (Brazil); Aquino, G A de [SABESP/UNICAMP (Brazil); Filho, J G D, E-mail: yvone.lucca@gmail.co [Water Resources Department, University of Campinas-UNICAMP, Av. Albert Einstein, 951, Cidade Universitaria-Barao Geraldo-Campinas, S.P., 13083-852 (Brazil)

    2010-08-15

    It is known that the presence of trapped air within water distribution pipes can lead to irregular operation or even damage to the distribution systems and their components. The presence of trapped air may occur while the pipes are being filled with water, or while the pumping systems are in operation. The formation of large air pockets can produce the water hammer phenomenon, the instability and the loss of pressure in the water distribution networks. As a result, it can overload the pumps, increase the consumption of electricity, and damage the pumping system. In order to avoid its formation, all of the trapped air should be removed through 'air trap valves'. In Brazil, manufacturers frequently have unreliable sizing charts, which cause malfunctioning of the 'air trap valves'. The result of these malfunctions causes accidents of substantial damage. The construction of a test facility will provide a foundation of technical information that will be used to help make decisions when designing a system of pipelines where 'air trap valves' are used. To achieve this, all of the valve characteristics (geometric, mechanic, hydraulic and dynamic) should be determined. This paper aims to describe and analyze the experimental apparatus and test procedure to be used to test 'air trap valves'. The experimental apparatus and test facility will be located at the University of Campinas, Brazil at the College of Civil Engineering, Architecture, and Urbanism in the Hydraulics and Fluid Mechanics laboratory. The experimental apparatus will be comprised of various components (pumps, steel pipes, butterfly valves to control the discharge, flow meter and reservoirs) and instrumentation (pressure transducers, anemometer and proximity sensor). It should be emphasized that all theoretical and experimental procedures should be defined while taking into consideration flow parameters and fluid properties that influence the tests.

  12. Apparatus for fabricating continuous lengths of superconductor

    Science.gov (United States)

    Kroeger, Donald M.; List, III, Frederick A.

    2002-01-01

    A process and apparatus for manufacturing a superconductor. The process is accomplished by depositing a superconductor precursor powder on a continuous length of a first substrate ribbon, overlaying a continuous length of a second substrate ribbon on said first substrate ribbon, and applying sufficient pressure to form a bound layered superconductor comprising a layer of said superconducting precursor powder between said first substrate ribbon and said second substrates ribbon. The layered superconductor is then heat treated to establish the superconducting phase of said superconductor precursor powder.

  13. Apparatus for determining changes in limb volume

    Science.gov (United States)

    Bhagat, P. K.; Wu, V. C. (Inventor)

    1981-01-01

    Measuring apparatus for determining changes in the volume of limbs or other boty extremities by determining the cross-sectional area of such limbs many comprise a transmitter including first and second transducers for positioning on the surface of the limb at a predetermined distance there between, and a receiver including a receiver crystal for positioning on the surface of the limb. The distance between the receiver crystal and the first and second transducers are represented by respective first and second chords of the cross-section of the limb and the predetermined distance between the first and second transducers is represented by a third chord of the limb cross section.

  14. ELECTROMAGNETIC APPARATUS FOR MOVING A ROD

    Science.gov (United States)

    Young, J.N.

    1958-04-22

    An electromagnetic apparatus for moving a rod-like member in small steps in either direction is described. The invention has particular application in the reactor field where the reactor control rods must be moved only a small distance and where the use of mechanical couplings is impractical due to the high- pressure seals required. A neutron-absorbing rod is mounted in a housing with gripping uaits that engage the rod, and coils for magnetizing the gripping units to make them grip, shift, and release the rod are located outside the housing.

  15. Apparatus for cooling an electric machine

    Science.gov (United States)

    Palafox, Pepe; Gerstler, William Dwight; Shen, Xiaochun; El-Refaie, Ayman Mohamed Fawzi; Lokhandwalla, Murtuza; Salasoo, Lembit

    2013-07-16

    Provided is an apparatus, for example, for use with a rotating electric machine, that includes a housing. The housing can include a housing main portion and a housing end portion. The housing main portion can be configured to be disposed proximal to a body portion of a stator section of an electric machine. The housing main portion can define a main fluid channel that is configured to conduct fluid therethrough. The housing end portion can receive fluid from said main fluid channel and direct fluid into contact with a winding end portion of a conductive winding of the stator section.

  16. Commercial Generic Bioprocessing Apparatus Science Insert - 03

    Science.gov (United States)

    Moreno, Nancy; Stodieck, Louis; Cushing, Paula; Stowe, Mark; Hamilton, Mary Ann; Werner, Ken

    2008-01-01

    Commercial Generic Bioprocessing Apparatus Science Insert - 03 (CSI-03) is the third set of investigations in the CSI program series. The CSI program provides the K-12 community opportunities to utilize the unique microgravity environment of the International Space Station as part of the regular classroom to encourage learning and interest in science, technology, engineering and math. CSI-03 will examine the complete life cycle of the painted lady butterfly and the ability of an orb weaving spider to spin a web, eat and remain healthy in space.

  17. Magnetic Field Apparatus (MFA) Hardware Test

    Science.gov (United States)

    Anderson, Ken; Boody, April; Reed, Dave; Wang, Chung; Stuckey, Bob; Cox, Dave

    1999-01-01

    The objectives of this study are threefold: (1) Provide insight into water delivery in microgravity and determine optimal germination paper wetting for subsequent seed germination in microgravity; (2) Observe the behavior of water exposed to a strong localized magnetic field in microgravity; and (3) Simulate the flow of fixative (using water) through the hardware. The Magnetic Field Apparatus (MFA) is a new piece of hardware slated to fly on the Space Shuttle in early 2001. MFA is designed to expose plant tissue to magnets in a microgravity environment, deliver water to the plant tissue, record photographic images of plant tissue, and deliver fixative to the plant tissue.

  18. A mobile apparatus for solar collector testing

    Science.gov (United States)

    Hotchkiss, G. B.; Simon, F. F.; Burmeister, L. C.

    1979-01-01

    The design, construction, and operation of a mobile apparatus for solar collector testing (MASCOT) is described. The MASCOT is a self-contained test unit costing about $10,000 whose only external requirement for operation is electrical power and which is capable of testing two water-cooled flat-plate solar collectors simultaneously. The MASCOT is small enough and light enough to be transported to any geographical site for outdoor tests at the location of collector usage. It has been used in both indoor solar simulator tests and outdoor tests.

  19. Cryogenic Active Magnetic Regenerator Test Apparatus

    Science.gov (United States)

    Tura, A.; Roszmann, J.; Dikeos, J.; Rowe, A.

    2006-04-01

    An AMR Test Apparatus (AMRTA) used in experiments near room-temperature required a number of modifications to allow for testing at cryogenic temperatures and with a 5 T magnetic field. The impacts of parasitic heat leaks, frictional heat generation, and eddy current heating in the AMRTA are analyzed. A low temperature gas circulation (LTGC) system to control the operating temperature was developed. The LTGC consists of a GM cryocooler coupled to a compressor and helium circuit which circulates fluid through a set of heat exchangers and flexible transfer lines connected to the AMRTA. Design features are discussed as is some initial test data.

  20. Apparatus and Methods Using Highly Optically Dispersive Media

    Science.gov (United States)

    2011-08-02

    of two-beam interferometers , such as, e.g., a Michelson interferometer , a Twyman-Green interferometer , and others known in the art. An alternative...guiding fiber . 20 32. The apparatus of claim 1, wherein the apparatus is a spectroscopic interferometer . 33. The apparatus of claim 1, wherein the...Zhimin et a!. "Enhancing the spectral sensitivity of interferometers using slow-light media". Optics Letters, vol. 32, No. 8, Apr. 15, 2007, pp. 915

  1. Technical presentation

    CERN Multimedia

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  2. Overview Presentation

    Science.gov (United States)

    Lytle, John

    2001-01-01

    This report provides an overview presentation of the 2000 NPSS (Numerical Propulsion System Simulation) Review and Planning Meeting. Topics include: 1) a background of the program; 2) 1999 Industry Feedback; 3) FY00 Status, including resource distribution and major accomplishments; 4) FY01 Major Milestones; and 5) Future direction for the program. Specifically, simulation environment/production software and NPSS CORBA Security Development are discussed.

  3. [Intramural nervous apparatus of jejunum and rectum in experimental portal hypertension].

    Science.gov (United States)

    Gaĭvoronskiĭ, I V; Tikhonova, L P; Chepur, S V; Nichiporuk, G I

    2004-01-01

    Using histological and electron microscopical methods, the state of intramural nervous structures of jejunum and rectum was studied in 92 dogs with experimental portal hypertension. Three phases of changes of portal pressure were detected and its influence upon the intramural nervous apparatus was observed. In phase 1 (first 4-5 days after the surgery) the reactive changes of the nervous apparatus were shown that were more pronounced in jejunum. In phase 2 (day 5 to 2.5 months) the portal pressure was shown to drop; this was accompanied by some signs of regeneration in jejunum and by an aggravation of destructive processes in rectum. In phase 3 of the repeated rise of portal pressure (2.5 to 6.5 months after the surgery), destructive changes in the nervous apparatus were demonstrated that were similar to those found in phase 1. However, the differences in the reaction of nervous structures in different layers of intestinal tube and the heterogeneity of the changes of the nervous apparatus in jejunum and rectum were absent. The association of time of appearance and of severity of structural changes with the elevation of portal pressure suggests the significant role of vascular factor in the morphogenesis of alterations observed in phase 3 of hemodynamic changes.

  4. Thermal design of space spectral imaging apparatus and its analysis and verification%空间光谱成像仪热设计及其分析与验证

    Institute of Scientific and Technical Information of China (English)

    郭亮; 吴清文; 颜昌翔

    2011-01-01

    为确保空间光谱成像仪的温度水平和温度梯度满足指标要求,分析讨论了空间光谱成像仪整机热设计的特点,根据其结构特点和导热路径,给出了整机热设计方案.采用有限元数值分析方法,建立了整机热平衡方程和热分析计算模型,应用有限元热分析软件IDEAS-TMG在给定温度边界条件下进行稳态仿真分析,给出了整机热响应性能以及关键部件稳态温度分布云图.热分析结果表明,整机平均温度水平为17.3~23.7℃,温度梯度最大值为1.3℃,获得的分析结果能够满足热控指标要求,为提高整机的可靠性和热设计优化提供了理论依据.最后,通过试验对热设计方案进行了验证,验证结果与数值分析结果吻合较好,其最大偏差均不超过8%,验证了数值分析的正确性和温度预示的有效性.试验过程中整机平均温度水平为17.2~22.5℃,温度梯度最大值为1.4℃.%To ensure a proper averaged temperature and a temperature gradient of a space spectral imaging apparatus, the characteristics of thermal design for the space spectral imaging apparatus were discussed and analyzed. According to the design feature and the heat transfer path in the spectral imaging apparatus,a thermal design scheme for the apparatus was presented and the thermal equilibrium equation and a numerical analysis model of the heat transfer for the apparatus were established by finite element analysis method. Based on given temperature boundary conditions, the steady-state thermal a-nalysis of the apparatus was carried out through a finite element thermal analysis software IDEAS-TMG. The thermal response performance and steady-state temperature profiles of key parts in the apparatus were given. Thermal analysis shows that the averaged temperature value and maximum tem-perature gradient value of the apparatus in steady-state are 17. 3~23. 7 °C and 1.3℃ , which has met the requirements of heat control, and can supply

  5. Biocorrosion and biofouling of metals and alloys of industrial usage. Present state of the art at the beginning of the new millennium

    Directory of Open Access Journals (Sweden)

    Videla, H. A.

    2003-12-01

    Full Text Available An overview on the present state of the art on Biocorrosion and Biofouling of metals and alloys of industrial usage is offered on the basis of the experience gathered in our laboratory over 25 years of research. The key concepts to understand the main effects of microorganisms on metal decay are briefly discussed. New trends in monitoring and control strategies to mitigate biocorrosion and biofouling deleterious effects are also described. Several relevant cases of biocorrosion studied by our research group are successively described: i biocorrosion of aluminum and its alloys by fungal contaminants of jet fuels; ii Sulfate-reducing bacteria SRB induced corrosion of steel; iii biocorrosion and biofouling interactions in the marine environment; iv monitoring strategies for assessing biocorrosion in industrial water systems; v microbial inhibition of corrosion; vi use and limitations of electrochemical techniques for evaluating biocorrosion effects. The future perspective of the field is made considering the potential of innovative techniques in microscopy (environmental scanning electron microscopy, confocal scanning laser microscopy, atomic force microscopy, new spectroscopical techniques used for the study of corrosion products and biofilms (energy dispersion X-ray analysis, X-ray photoelectron spectroscopy, electron microprobe analysis and electrochemistry (electrochemical impedance spectroscopy, electrochemical noise analysis.

    Se ofrece una revisión del estado actual del conocimiento sobre Biocorrosión y Biofouling de metales y aleaciones de uso industrial basada en la experiencia desarrollada en nuestro laboratorio durante 25 años de investigación en el área. Se discuten brevemente los conceptos clave necesarios para entender los principales efectos de los microorganismos en el deterioro de los metales. También se presentan las nuevas tendencias seguidas para el monitoreo y las nuevas estrategias de control para mitigar

  6. Nosema Ceranae is a long present and wide spread microsporidian infection of the European honey bee (Apis mellifera) in the United States.

    Science.gov (United States)

    Nosema is a serious disease of adult honey bees and a major threat to the beekeeping industry. To investigate the presence, distribution, and historical occurrence of two different Nosema species, N. apis and N. ceranae, in the United States, we examined bee samples collected between 1995 and 2007...

  7. A Simple, Inexpensive Acoustic Levitation Apparatus

    Science.gov (United States)

    Schappe, R. Scott; Barbosa, Cinthya

    2017-01-01

    Acoustic levitation uses a resonant ultrasonic standing wave to suspend small objects; it is used in a variety of research disciplines, particularly in the study of phase transitions and materials susceptible to contamination, or as a stabilization mechanism in microgravity environments. The levitation equipment used for such research is quite costly; we wanted to develop a simple, inexpensive system to demonstrate this visually striking example of standing waves. A search of the literature produced only one article relevant to creating such an apparatus, but the authors' approach uses a test tube, which limits the access to the standing wave. Our apparatus, shown in Fig. 1, can levitate multiple small (1-2 mm) pieces of expanded polystyrene (Styrofoam) using components readily available to most instructors of introductory physics. Acoustic levitation occurs in small, stable equilibrium locations where the weight of the object is balanced by the acoustic radiation force created by an ultrasonic standing wave; these locations are slightly below the pressure nodes. The levitation process also creates a horizontal restoring force. Since the pressure nodes are also velocity antinodes, this transverse stability may be analogous to the effect of an upward air stream supporting a ball.

  8. Data eye monitor method and apparatus

    Science.gov (United States)

    Gara, Alan G [Mount Kisco, NY; Marcella, James A [Rochester, MN; Ohmacht, Martin [Yorktown Heights, NY

    2012-01-31

    An apparatus and method for providing a data eye monitor. The data eye monitor apparatus utilizes an inverter/latch string circuit and a set of latches to save the data eye for providing an infinite persistent data eye. In operation, incoming read data signals are adjusted in the first stage individually and latched to provide the read data to the requesting unit. The data is also simultaneously fed into a balanced XOR tree to combine the transitions of all incoming read data signals into a single signal. This signal is passed along a delay chain and tapped at constant intervals. The tap points are fed into latches, capturing the transitions at a delay element interval resolution. Using XORs, differences between adjacent taps and therefore transitions are detected. The eye is defined by segments that show no transitions over a series of samples. The eye size and position can be used to readjust the delay of incoming signals and/or to control environment parameters like voltage, clock speed and temperature.

  9. A radial transmission line material measurement apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Warne, L.K.; Moyer, R.D.; Koontz, T.E.; Morris, M.E.

    1993-05-01

    A radial transmission line material measurement sample apparatus (sample holder, offset short standards, measurement software, and instrumentation) is described which has been proposed, analyzed, designed, constructed, and tested. The purpose of the apparatus is to obtain accurate surface impedance measurements of lossy, possibly anisotropic, samples at low and intermediate frequencies (vhf and low uhf). The samples typically take the form of sections of the material coatings on conducting objects. Such measurements thus provide the key input data for predictive numerical scattering codes. Prediction of the sample surface impedance from the coaxial input impedance measurement is carried out by two techniques. The first is an analytical model for the coaxial-to-radial transmission line junction. The second is an empirical determination of the bilinear transformation model of the junction by the measurement of three full standards. The standards take the form of three offset shorts (and an additional lossy Salisbury load), which have also been constructed. The accuracy achievable with the device appears to be near one percent.

  10. Method and apparatus for biological sequence comparison

    Science.gov (United States)

    Marr, T.G.; Chang, W.I.

    1997-12-23

    A method and apparatus are disclosed for comparing biological sequences from a known source of sequences, with a subject (query) sequence. The apparatus takes as input a set of target similarity levels (such as evolutionary distances in units of PAM), and finds all fragments of known sequences that are similar to the subject sequence at each target similarity level, and are long enough to be statistically significant. The invention device filters out fragments from the known sequences that are too short, or have a lower average similarity to the subject sequence than is required by each target similarity level. The subject sequence is then compared only to the remaining known sequences to find the best matches. The filtering member divides the subject sequence into overlapping blocks, each block being sufficiently large to contain a minimum-length alignment from a known sequence. For each block, the filter member compares the block with every possible short fragment in the known sequences and determines a best match for each comparison. The determined set of short fragment best matches for the block provide an upper threshold on alignment values. Regions of a certain length from the known sequences that have a mean alignment value upper threshold greater than a target unit score are concatenated to form a union. The current block is compared to the union and provides an indication of best local alignment with the subject sequence. 5 figs.

  11. Apparatus for enhancing tissue repair in mammals

    Science.gov (United States)

    Goodwin, Thomas J. (Inventor); Parker, Clayton R. (Inventor)

    2007-01-01

    An apparatus is disclosed for enhancing tissue repair in mammals, with the apparatus comprising: a sleeve for encircling a portion of a mammalian body part, said sleeve comprising an electrically conductive coil capable of generating an electromagnetic field when an electrical current is applied thereto, means for supporting the sleeve on the mammalian body part; and means for supplying the electrically conductive coil with a square wave time varying electrical current sufficient to create a time varying electromagnetic force of from approximately 0.05 gauss to 0.05 gauss within the interior of the coil in order that when the sleeve is placed on a mammalian body part and the time varying electromagnetic force of from approximately 0.05 gauss to 0.05 gauss is generated on the mammalian body part for an extended period of time, tissue regeneration within the mammalian body part is increased to a rate in excess of the normal tissue regeneration rate that would occur without application of the time varying electromagnetic force.

  12. Performances of a portable electrospinning apparatus.

    Science.gov (United States)

    Mouthuy, Pierre-Alexis; Groszkowski, Lukasz; Ye, Hua

    2015-05-01

    To demonstrate that portable electrospinning devices can spin a wide range of polymers into submicron fibres and provide a mesh quality comparable to those produced with benchtop machines. We have designed a small, battery-operated electrospinning apparatus which enables control over the voltage and the flow rate of the polymer solution via a microcontroller. It can be used to electrospin a range of commonly used polymers including poly(ε-caprolactone), poly(p-dioxanone), poly(lactic-co-glycolic acid), poly(3-hydroxybutyrate), poly(ethylene oxide), poly(vinyl acohol) and poly(vinyl butyral). Moreover, electrospun meshes are produced with a quality comparable to a benchtop machine. We also show that the portable apparatus is able to electrospray beads and microparticles. Finally, we highlight the potential of the device for wound healing applications by demonstrating the possibility of electrospinning onto pig and human skins. Portable electrospinning devices are still at an early stage of development but they could soon become an attractive alternative to benchtop machines, in particular for uses that require mobility and a higher degree of flexibility, such as for wound healing applications.

  13. Design of novel dual-port tapered waveguide plasma apparatus by numerical analysis

    Science.gov (United States)

    Zhang, D.; Zhou, R.; Yang, X. Q.; Wu, S. Y.

    2016-07-01

    Microwave plasma apparatus is often of particular interest due to their superiority of low cost, electrode contamination free, and suitability for industrial production. However, there exist problems of unstable plasma and low electron density in conventional waveguide apparatus based on single port, due to low strength and non-uniformity of microwave field. This study proposes a novel dual-port tapered waveguide plasma apparatus based on power-combining technique, to improve the strength and uniformity of microwave field for the applications of plasma. A 3D model of microwave-induced plasma (field frequency 2.45 GHz) in argon at atmospheric pressure is presented. On the condition that the total input power is 500 W, simulations indicate that coherent power-combining will maximize the electric-field strength to 3.32 × 105 V/m and improve the uniformity of distributed microwave field, which raised 36.7% and 47.2%, respectively, compared to conventional waveguide apparatus of single port. To study the optimum conditions for industrial application, a 2D argon fluid model based on above structure is presented. It demonstrates that relatively uniform and high-density plasma is obtained at an argon flow rate of 200 ml/min. The contrastive result of electric-field distribution, electron density, and gas temperature is also valid and clearly proves the superiority of coherent power-combining to conventional technique in flow field.

  14. Gazification of coal dust particles in the blast furnace tuyere apparatus

    Science.gov (United States)

    Shvydky, V. S.; Yaroshenko, Yu G.; Spirin, N. A.; Lavrov, V. V.

    2016-09-01

    The mathematical statement of the problem on gasification of coal dust particles in the blast-furnace tuyere apparatus is given, which includes the motion equation of a variable mass particle, heat equation of a particle and the heat-balance equation of the blast flow. The results of calculations are obtained by using mathematical software packages (Mathcad, Maple). Relatively weak effect of the volatiles combustion process on the thermal state of the tuyere zone is shown.

  15. Technical presentation

    CERN Multimedia

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  16. Make Your Presentation Powerful

    Science.gov (United States)

    Palmer, Erik

    2015-01-01

    "I was planning on doing a lot of work today during your presentation, but I couldn't get anything done. I just had to pay attention!" The author received this unexpected feedback from a teacher at the end of a presentation he gave, and although he considered it a compliment, it made him reflect on the dire state of presentations in…

  17. Distribution of Calcium and Chitin in the Tardigrade Feeding Apparatus in Relation to its Function and Morphology.

    Science.gov (United States)

    Guidetti, Roberto; Bonifacio, Alois; Altiero, Tiziana; Bertolani, Roberto; Rebecchi, Lorena

    2015-08-01

    The cuticular portion of the tardigrade feeding apparatus is a complex structure that can be schematically divided into four parts: a buccal ring, a buccal tube, a stylet system (formed by two piercing stylets, each within a stylet coat, and two stylet supports), and the lining of a myoepithelial sucking pharynx. To better understand the function and evolution of the feeding apparatus, the morpho-functional traits and chemical composition of the structures forming the feeding apparatuses of eight different species of tardigrades were analyzed. These eight species are representative of almost all main phylogenetic lineages of the phylum. The calcium and chitin in the feeding apparatus were examined by light microscopy, scanning electron microscopy, confocal laser scanning microscopy, energy dispersive X-ray spectroscopy, and Raman microspectroscopy (Raman). In all species, the feeding apparatus had been subjected to biomineralization due to CaCO3 encrustations organized in the crystalline form of aragonite. Aragonite and chitin are present in different concentrations in the feeding apparatus according to the structures and species considered. Generally, where the structures are rigid there is more aragonite than chitin, and vice versa. The buccal tube and piercing stylets are rich in calcium, with the piercing stylets apparently composed exclusively of aragonite. In eutardigrades, chitin is in higher concentration in the structures subject to higher mechanical stresses, such as the crests of the buccal crown and the condyles of the stylet furca.

  18. System, method, and apparatus for remote measurement of terrestrial biomass

    Science.gov (United States)

    Johnson, Patrick W

    2011-04-12

    A system, method, and/or apparatus for remote measurement of terrestrial biomass contained in vegetative elements, such as large tree boles or trunks present in an area of interest, are provided. The method includes providing an airborne VHF radar system in combination with a LiDAR system, overflying the area of interest while directing energy toward the area of interest, using the VHF radar system to collect backscatter data from the trees as a function of incidence angle and frequency, and determining a magnitude of the biomass from the backscatter data and data from the laser radar system for each radar resolution cell. A biomass map is generated showing the magnitude of the biomass of the vegetative elements as a function of location on the map by using each resolution cell as a unique location thereon. In certain preferred embodiments, a single frequency is used with a linear array antenna.

  19. A simple design for a helium scattering apparatus

    Science.gov (United States)

    Maier, F.; Kneitz, S.; Koschel, H.; Steinrück, H.-P.

    1997-04-01

    We have designed a simple helium scattering apparatus for gas-surface scattering experiments. The effusive source is a glass multicapillary array, operated at large Knudsen numbers which produces a highly collimated thermal He beam (FWHM ≈ 3°) with a Maxwellian velocity distribution. The detector is a Bayard Alpert ionization gauge, mounted in a tube that is separated from the main UHV chamber via a second multicapillary array. This setup allows one to select only those He atoms that are reflected by the sample in the specular direction and thus to measure the reflectivity of the surface. Examples of its performance are presented for the adsorption of CO on Ru(001), and for thermal annealing of a Ru(001) surface sputtered with argon ions at different energies.

  20. Apparatus for magnetic and electrostatic confinement of plasma

    Energy Technology Data Exchange (ETDEWEB)

    Rostoker, Norman; Binderbauer, Michl

    2016-07-05

    An apparatus and method for containing plasma and forming a Field Reversed Configuration (FRC) magnetic topology are described in which plasma ions are contained magnetically in stable, non-adiabatic orbits in the FRC. Further, the electrons are contained electrostatically in a deep energy well, created by tuning an externally applied magnetic field. The simultaneous electrostatic confinement of electrons and magnetic confinement of ions avoids anomalous transport and facilitates classical containment of both electrons and ions. In this configuration, ions and electrons may have adequate density and temperature so that upon collisions ions are fused together by nuclear force, thus releasing fusion energy. Moreover, the fusion fuel plasmas that can be used with the present confinement system and method are not limited to neutronic fuels only, but also advantageously include advanced fuels.

  1. Linguistic-etnographic study in a community of Ukranians immigrants in the State of Paraná: from the past to the present

    OpenAIRE

    Garcia, Neiva Mara Zanin; Universidade Estadual de Londrina

    2009-01-01

    This article approaches the theoretical-methodological procedures, as well as the results of this research on the current stage of the spoken language by the Ukranians immigrants' descendants who live in a community located at the south of the State of Paraná. The theoretical discussion is based on the principles of  Sociolinguistics, particularly the ones concerned with the phenomena of linguistic contact between the Portuguese language spoken by the inhabitants in this community and the Ukr...

  2. Factor Markets in Applied Equilibrium Models: The current state and planned extensions towards an improved presentation of factor markets in agriculture

    NARCIS (Netherlands)

    Shutes, L.J.; Rothe, A.; Banse, M.A.H.

    2012-01-01

    This paper describes how factor markets are presented in applied equilibrium models and how we plan to improve and to extend the presentation of factor markets in two specific models: MAGNET and ESIM. We do not argue that partial equilibrium models should become more ‘general’ in the sense of integr

  3. Monitoring the Photosynthetic Apparatus During Space Flight: Interspecific Variation in Chlorophyll Fluorescence Signatures Induced by Different Root Zone Stresses

    Science.gov (United States)

    Bubenheim, David L.; Patterson, Mark T.; Kliss, Mark H. (Technical Monitor)

    1996-01-01

    Chlorophyll fluorescence has been used extensively as a tool to indicate stress to the photosynthetic apparatus in green plants. A rise in fluorescence has been attributed to the blockage of photosystem II photochemistry, and patterns of fluorescence decay (quenching) from dark adapted leaves can be related to specific photochemical and non-photochemical deexcitation pathways of light trapped by the photosynthetic apparatus and thus result in characteristically different fluorescence signatures. Four distantly related plant species, Hypocharis radicata (Asteraceae), Brassica rapa (Brassicaceae), Spinacea oleracea (Chenopodiaceae) and Triticum aestivum (Poaceae), were grown hydroponically for three weeks before the initiation of three different root zone stresses (10 mM Cu, 100 mM NaCl and nitrogen deficient nutrition). After 10 days, characteristic fluorescence signatures for each stress could be noted although the degree varied between species. Fast kinetics analysis showed a reduction in plastoquinone pool size for copper and nitrogen stress for all species but a more species specific result with NaCl stress. Photochemical quenching kinetics varied between species and stress treatments from no quenching in S. oleracea in copper treatments to increased photochemical quenching in NaCl treatments. Non-photochemical quenching kinetics demonstrated a distinct pattern between stresses for all species. Copper treatments characteristically exhibited a shallow, flat non-photochemical quenching profile suggesting a general blockage of electron transport whereas NaCl treatments exhibited a slow rising profile that suggested damage to thylakoid acidification kinetics and nitrogen deficiency exhibited a fast rising and declining profile that suggested an altered state 1-state 2 transition regulated by the phosphorylation of LHCII. These results demonstrate characteristic fluorescence signatures for specific plant stresses that may be applied to different, unrelated plant

  4. PAQR10 and PAQR11 mediate Ras signaling in the Golgi apparatus.

    Science.gov (United States)

    Jin, Ting; Ding, Qiurong; Huang, Heng; Xu, Daqian; Jiang, Yuhui; Zhou, Ben; Li, Zhenghu; Jiang, Xiaomeng; He, Jing; Liu, Weizhong; Zhang, Yixuan; Pan, Yi; Wang, Zhenzhen; Thomas, Walter G; Chen, Yan

    2012-04-01

    Ras plays a pivotal role in many cellular activities, and its subcellular compartmentalization provides spatial and temporal selectivity. Here we report a mode of spatial regulation of Ras signaling in the Golgi apparatus by two highly homologous proteins PAQR10 and PAQR11 of the progestin and AdipoQ receptors family. PAQR10 and PAQR11 are exclusively localized in the Golgi apparatus. Overexpression of PAQR10/PAQR11 stimulates basal and EGF-induced ERK phosphorylation and increases the expression of ERK target genes in a dose-dependent manner. Overexpression of PAQR10/PAQR11 markedly elevates Golgi localization of HRas, NRas and KRas4A, but not KRas4B. PAQR10 and PAQR11 can also interact with HRas, NRas and KRas4A, but not KRas4B. The increased Ras protein at the Golgi apparatus by overexpression of PAQR10/PAQR11 is in an active state. Consistently, knockdown of PAQR10 and PAQR11 reduces EGF-stimulated ERK phosphorylation and Ras activation at the Golgi apparatus. Intriguingly, PAQR10 and PAQR11 are able to interact with RasGRP1, a guanine nucleotide exchange protein of Ras, and increase Golgi localization of RasGRP1. The C1 domain of RasGRP1 is both necessary and sufficient for the interaction of RasGRP1 with PAQR10/PAQR11. The simulation of ERK phosphorylation by overexpressed PAQR10/PAQR11 is abrogated by downregulation of RasGRP1. Furthermore, differentiation of PC12 cells is significantly enhanced by overexpression of PAQR10/PAQR11. Collectively, this study uncovers a new paradigm of spatial regulation of Ras signaling in the Golgi apparatus by PAQR10 and PAQR11.

  5. PAQR10 and PAQR11 mediate Ras signaling in the Golgi apparatus

    Institute of Scientific and Technical Information of China (English)

    Ting Jin; Weizhong Liu; Yixuan Zhang; Yi Pan; Zhenzhen Wang; Walter G Thomas; Yan Chen; Qiurong Ding; Heng Huang; Daqian Xu; Yuhui Jiang; Ben Zhou; Zhenghu Li; Xiaomeng Jiang; Jing He

    2012-01-01

    Ras plays a pivotal role in many cellular activities,and its subcellular compartmentalization provides spatial and temporal selectivity.Here we report a mode of spatial regulation of Ras signaling in the Golgi apparatus by two highly homologous proteins PAQR10 and PAQR11 of the progestin and AdipoQ receptors family.PAQR10 and PAQR11 are exclusively localized in the Golgi apparatus.Overexpression of PAQR10/PAQR11 stimulates basal and EGF-induced ERK phosphorylation and increases the expression of ERK target genes in a dose-dependent manner.Overexpression of PAQR10/PAQR11 markedly elevates Golgi localization of HRas,NRas and KRas4A,but not KRas4B.PAQR10 and PAQR11 can also interact with HRas,NRas and KRas4A,but not KRas4B.The increased Ras protein at the Golgi apparatus by overexpression of PAQR10/PAQR11 is in an active state.Consistently,knockdown of PAQR10 and PAQR11 reduces EGF-stimulated ERK phosphorylation and Ras activation at the Golgi apparatus.Intriguingly,PAQR10 and PAQR11 are able to interact with RasGRP1,a guanine nucleotide exchange protein of Ras,and increase Golgi localization of RasGRP1.The C1 domain of RasGRP1 is both necessary and sufficient for the interaction of RasGRP1 with PAQR10/PAQR11.The simulation of ERK phosphorylation by overexpressed PAQR10/PAQR11 is abrogated by downregulation of RasGRP1.Furthermore,differentiation of PC12 cells is significantly enhanced by overexpression of PAQR10/PAQR11.Collectively,this study uncovers a new paradigm of spatial regulation of Ras signaling in the Golgi apparatus by PAQR10 and PAQR11.

  6. The Importance of Interspecific Interactions on the Present Range of the Invasive Mosquito Aedes albopictus (Diptera: Culicidae) and Persistence of Resident Container Species in the United States.

    Science.gov (United States)

    Fader, Joseph E

    2016-09-01

    Aedes albopictus (Skuse) established in the United States over 30 yr ago and quickly spread throughout the entire eastern half of the country. It has recently spread into western regions and projected climate change scenarios suggest continued expansion to the west and north. Aedes albopictus has had major impacts on, and been impacted by, a diverse array of resident mosquito species. Laying eggs at the edges of small, water-holding containers, hatched larvae develop within these containers feeding on detritus-based resources. Under limited resource conditions, Ae. albopictus has been shown to be a superior competitor to essentially all native and resident species in the United States. Adult males also mate interspecifically with at least one resident species with significant negative impacts on reproductive output for susceptible females. Despite these strong interference effects on sympatric species, competitor outcomes have been highly variable, ranging from outright local exclusion by Ae. albopictus, to apparent exclusion of Ae. albopictus in the presence of the same species. Context-dependent mechanisms that alter the relative strengths of inter- and intraspecific competition, as well as rapid evolution of satyrization-resistant females, may help explain these patterns of variable coexistence. Although there is a large body of research on interspecific interactions of Ae. albopictus in the United States, there remain substantial gaps in our understanding of the most important species interactions. Addressing these gaps is important in predicting the future distribution of this species and understanding consequences for resident species, including humans, that interact with this highly invasive mosquito.

  7. 16 CFR Figure 9 to Part 1203 - Impact Test Apparatus

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Impact Test Apparatus 9 Figure 9 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 9 Figure 9 to Part 1203—Impact Test Apparatus...

  8. 21 CFR 862.2485 - Electrophoresis apparatus for clinical use.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Electrophoresis apparatus for clinical use. 862.2485 Section 862.2485 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... Instruments § 862.2485 Electrophoresis apparatus for clinical use. (a) Identification. An...

  9. Apparatus for the laser ablative synthesis of carbon nanotubes

    Science.gov (United States)

    Smith, Michael W.; Jordan, Kevin

    2010-02-16

    An RF-induction heated side-pumped synthesis chamber for the production of carbon nanotubes. Such an apparatus, while capable of producing large volumes of carbon nanotubes, concurrently provides a simplified apparatus that allows for greatly reduced heat up and cool down times and flexible flowpaths that can be readily modified for production efficiency optimization.

  10. Microchannel apparatus and methods of conducting catalyzed oxidative dehydrogenation

    Science.gov (United States)

    Tonkovich, Anna Lee; Yang, Bin; Perry, Steven T.; Mazanec, Terry; Arora, Ravi; Daly, Francis P.; Long, Richard; Yuschak, Thomas D.; Neagle, Paul W.; Glass, Amanda

    2011-08-16

    Methods of oxidative dehydrogenation are described. Surprisingly, Pd and Au alloys of Pt have been discovered to be superior for oxidative dehydrogenation in microchannels. Methods of forming these catalysts via an electroless plating methodology are also described. An apparatus design that minimizes heat transfer to the apparatus' exterior is also described.

  11. Apparatus for the production of methane from organic wastes

    Energy Technology Data Exchange (ETDEWEB)

    Pfefferkorn, H.

    1980-07-23

    CH/sub 4/ is manufactured by fermentation of organic wastes in an apparatus comprising a fermentation container and a post-fermentation container. Both containers are connected via a conduit, and the gas formed is collected in the upper part of the fermentation container. Additional features and components of the apparatus are illustrated.

  12. Apparatus as Milestones in the History of Comparative Psychology

    Science.gov (United States)

    Washburn, David A.; Rumbaugh, Duane M.; Putney, R. Thompson

    1994-01-01

    Significant apparatus developments from the history of comparative psychology are reviewed, including the contemporary trend toward computer use in research with nonhuman animals. It is argued that milestone apparatus served not only to open new lines of inquiry but also to shape or delimit the nature of the answers that were obtained.

  13. Species of the subfamily Triatominae Jeannel, 1919 (Hemiptera: Reduviidae present in the Collection of Chagas Disease Vectors (FIOCRUZ-COLVEC, State of Minas Gerais

    Directory of Open Access Journals (Sweden)

    Rita de Cássia Moreira de Souza

    2014-12-01

    Full Text Available Introduction Biological collections are depositories of information on different species and contribute to the knowledge, protection, conservation and maintenance of biodiversity. Methods A list of triatomine species currently included in the Collection of Chagas Disease Vectors (FIOCRUZ-COLVEC was prepared from the database made available by the Reference Center on Environmental Information. Results COLVEC curatorship houses 4,778 specimens of triatomines, of which 811 come from other American countries (Argentina, Bolivia, Colombia, Costa Rica, the United States of America, Guatemala, Mexico, Peru, Uruguay and Venezuela and 3,967 are autochthonous from Brazil. Altogether, 56 species of Chagas disease vectors are represented in the COLVEC: two species of the Tribe Cavernicolini Usinger, 1944; fifteen species of the tribe Rhodniini Pinto, 1926, of which 12 are of the genus Rhodnius and 3 are of the genus Psamolestes; and 39 species of the tribe Triatomini Jeannel, 1919, represented by the genus Dipetalogaster, two species of the genus Eratyrus, two of the genus Meccus, seven of the genus Panstrongylus and 27 of the genus Triatoma. Conclusions This list provides important data on the diversity of triatomines currently included in COLVEC, including the expanded area of Panstrongylus lutzi occurrence in the municipalities Pirapora and Januária, State of Minas Gerais. The maintenance and expansion of the collection ensures the preservation of biodiversity and further studies.

  14. Opposed-Flow Flame Spread in a Narrow Channel Apparatus over Thin PMMA Sheets

    Science.gov (United States)

    Bornand, G. R.; Olson, Sandra L.; Miller, F. J.; Pepper, J. M.; Wichman, I. S.

    2013-01-01

    Flame spread tests have been conducted over polymethylmethacrylate (PMMA) samples in San Diego State University's Narrow Channel Apparatus (SDSU NCA). The Narrow Channel Apparatus (NCA) has the ability to suppress buoyant flow in horizontally spreading flames, and is currently being investigated as a possible replacement or complement to NASA's current material flammability test standard for non-metallic solids, NASA-STD-(I)-6001B Test 1. The buoyant suppression achieved with a NCA allows for tests to be conducted in a simulated microgravity atmosphere-a characteristic that Test 1 lacks since flames present in Test 1 are buoyantly driven. The SDSU NCA allows for flame spread tests to be conducted with varying opposed flow oxidizer velocities, oxygen percent by volume, and total pressure. Also, since the test sample is placed symmetrically between two confining plates so that there is a gap above and below the sample, this gap can be adjusted. This gap height adjustment allows for a compromise between heat loss from the flame to the confining boundaries and buoyancy suppression achieved by those boundaries. This article explores the effect gap height has on the flame spread rate for 75 µm thick PMMA at 1 atm pressure and 21% oxygen concentration by volume in the SDSU NCA. Flame spread results from the SDSU NCA for thin cellulose fuels have previously been compared to results from tests in actual microgravity at various test conditions with the same sample materials and were found to be in good agreement. This article also presents results from the SDSU NCA for PMMA at 1 atm pressure, opposed oxidizer velocity ranging from 3 to 35 cm/s, oxygen concentration by volume at 21%, 30 %, and 50% and fuel thicknesses of 50 and 75 µm. These results are compared to results obtained in actual microgravity for PMMA obtained at the 4.5s drop tower of MGLAB in Gifu, Japan, and the 5.2s drop tower at NASA's Zero-Gravity Research Facility in Cleveland, OH. This comparison confirms

  15. Both intra- and interstrand charge-transfer excited states in aqueous B-DNA are present at energies comparable to, or just above, the (1)pipi* excitonic bright states.

    Science.gov (United States)

    Lange, Adrian W; Herbert, John M

    2009-03-25

    Vertical electronic excitations in model systems representing single- and double-stranded B-DNA are characterized using electronic structure theory, including both time-dependent density functional theory (TD-DFT) and correlated wave function techniques. Previous TD-DFT predictions of charge-transfer (CT) states well below the optically bright (1)pipi* states are shown to be artifacts of the improper long-range behavior of standard density-functional exchange approximations, which we rectify here using a long-range correction (LRC) procedure. For nucleobase dimers (hydrogen-bonded or pi-stacked), TD-LRC-DFT affords vertical excitation energies in reasonable agreement with the wave function methods, not only for the (1)npi* and (1)pipi* states but also for the CT states, and qualitatively reproduces well-known base-stacking effects on the absorption spectrum of DNA. The emergence of (1)pipi* Frenkel exciton states, localized on a single strand, is clearly evident, and these states (rather than low-energy CT states) are primarily responsible for the fact that DNA's absorption spectrum exhibits a red tail that is absent in monomer absorption spectra. For B-DNA in aqueous solution, the low-energy tail of the CT band (representing both intra- and interstrand CT states) appears at energies comparable to those of the optically bright (1)pipi* exciton states. In systems with more than one base pair, we also observe the emergence of delocalized, interstrand CT excitations, whose excitation energies may be significantly lower than the lowest CT excitation in a single base pair. Together, these observations suggest that a single Watson-Crick base pair is an inadequate model of the photophysics of B-DNA.

  16. A High-Temperature Transient Hot-Wire Thermal Conductivity Apparatus for Fluids.

    Science.gov (United States)

    Perkins, R A; Roder, H M; Nieto de Castro, C A

    1991-01-01

    A new apparatus for measuring both the thermal conductivity and thermal diffusivity of fluids at temperatures from 220 to 775 K at pressures to 70 MPa is described. The instrument is based on the step-power-forced transient hot-wire technique. Two hot wires are arranged in different arms of a Wheatstone bridge such that the response of the shorter compensating wire is subtracted from the response of the primary wire. Both hot wires are 12.7 µm diameter platinum wire and are simultaneously used as electrical heat sources and as resistance thermometers. A microcomputer controls bridge nulling, applies the power pulse, monitors the bridge response, and stores the results. Performance of the instrument was verified with measurements on liquid toluene as well as argon and nitrogen gas. In particular, new data for the thermal conductivity of liquid toluene near the saturation line, between 298 and 550 K, are presented. These new data can be used to illustrate the importance of radiative heat transfer in transient hot-wire measurements. Thermal conductivity data for liquid toluene, which are corrected for radiation, are reported. The precision of the thermal conductivity data is ± 0.3% and the accuracy is about ±1%. The accuracy of the thermal diffusivity data is about ± 5%. From the measured thermal conductivity and thermal diffusivity, we can calculate the specific heat, Cp , of the fluid, provided that the density is measured, or available through an equation of state.

  17. A dispenser-reactor apparatus applied for in situ XAS monitoring of Pt nanoparticle formation.

    Science.gov (United States)

    Boita, Jocenir; Castegnaro, Marcus Vinicius; Alves, Maria do Carmo Martins; Morais, Jonder

    2015-05-01

    In situ time-resolved X-ray absorption spectroscopy (XAS) measurements collected at the Pt L3-edge during the synthesis of Pt nanoparticles (NPs) in aqueous solution are reported. A specially designed dispenser-reactor apparatus allowed for monitoring changes in the XAS spectra from the earliest moments of Pt ions in solution until the formation of metallic nanoparticles with a mean diameter of 4.9 ± 1.1 nm. By monitoring the changes in the local chemical environment of the Pt atoms in real time, it was possible to observe that the NPs formation kinetics involved two stages: a reduction-nucleation burst followed by a slow growth and stabilization of NPs. Subsequently, the synthesized Pt NPs were supported on activated carbon and characterized by synchrotron-radiation-excited X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS). The supported Pt NPs remained in the metallic chemical state and with a reduced size, presenting slight lattice parameter contraction in comparison with the bulk Pt values.

  18. Effects of salinity on the photosynthetic apparatus of two Paulownia lines.

    Science.gov (United States)

    Stefanov, Martin; Yotsova, Ekaterina; Rashkov, Georgi; Ivanova, Katya; Markovska, Yuliana; Apostolova, Emilia L

    2016-04-01

    The effects of soil salinity on the functional activity of photosynthetic apparatus and pigment composition of two Paulownia lines (Paulownia tomentosa x fortunei and Paulownia elongata x elongata) were investigated. PAM chlorophyll fluorescence measurements revealed that salinity leads to: (i) an increase of the photochemical quenching coefficient (qP) and the linear electron transport rate (ETR) in both lines of Paulownia, while the maximum quantum yield of the primary photochemistry of PSII in the dark adapted state (Fv/Fm) was unaffected; (ii) improved the efficiency of the photochemical energy conversion (ФPSII); (iii) an impact on the chlorophyll fluorescence decrease ratio (RFd), which correlates to the net CO2 assimilation rate; (iv) an impact on [Formula: see text] reoxidation. The analysis of the kinetics of P700(+) reduction upon turning off far-red irradiation revealed that salinization lead to a delay of the cyclic electron transport around PSI in both studied lines as the effect on this process is more pronounced in P. tomentosa x fortunei than in (in comparison with) P. elongata x elongata. The present experimental results suggested high salt tolerance of the studied lines Paulownia, but P. tomentosa x fortunei is more tolerant to salinity than P. elongata x elongata. Molecular mechanisms involved in the Paulownia response to the soil salinity are discussed.

  19. Apparatus and methods for real-time detection of explosives devices

    Energy Technology Data Exchange (ETDEWEB)

    Blackburn, Brandon W [Idaho Falls, ID; Hunt, Alan W [Pocatello, ID; Chichester, David L [Idaho Falls, ID

    2014-01-07

    The present disclosure relates, according to some embodiments, to apparatus, devices, systems, and/or methods for real-time detection of a concealed or camouflaged explosive device (e.g., EFPs and IEDs) from a safe stand-off distance. Apparatus, system and/or methods of the disclosure may also be operable to identify and/or spatially locate and/or detect an explosive device. An apparatus or system may comprise an x-ray generator that generates high-energy x-rays and/or electrons operable to contact and activate a metal comprised in an explosive device from a stand-off distance; and a detector operable to detect activation of the metal. Identifying an explosive device may comprise detecting characteristic radiation signatures emitted by metals specific to an EFP, an IED or a landmine. Apparatus and systems of the disclosure may be mounted on vehicles and methods of the disclosure may be performed while moving in the vehicle and from a safe stand-off distance.

  20. Method and Apparatus for Encouraging Physiological Self-Regulation Through Modulation of an Operator's Control Input to a Video Game or Training Simulator

    Science.gov (United States)

    Palsson, Olafur S. (Inventor); Harris, Randall L., Sr. (Inventor); Pope, Alan T. (Inventor)

    2002-01-01

    Apparatus and methods for modulating the control authority (i.e., control function) of a computer simulation or game input device (e.g., joystick, button control) using physiological information so as to affect the user's ability to impact or control the simulation or game with the input device. One aspect is to use the present invention, along with a computer simulation or game, to affect physiological state or physiological self-regulation according to some programmed criterion (e.g., increase, decrease, or maintain) in order to perform better at the game task. When the affected physiological state or physiological self-regulation is the target of self-regulation or biofeedback training, the simulation or game play reinforces therapeutic changes in the physiological signal(s).

  1. Os Estados Unidos e as relações internacionais contemporâneas The United States in the present international relations

    Directory of Open Access Journals (Sweden)

    Luis Fernando Ayerbe

    2005-12-01

    Full Text Available O artigo analisa a posição dos Estados Unidos nas relações internacionais pós-Guerra Fria, tomando como referência as controvérsias sobre os alcances e limites da sua postura hegemônica, que adquirem maior impulso a partir da formulação da chamada "doutrina Bush", sistematizada no documento "A Estratégia de Segurança Nacional dos EUA". No tratamento da temática proposta, enfatizam-se os seguintes aspectos: estabelecimento de um paralelo entre a transição dos séculos XIX-XX e XX-XXI, situando as características do imperialismo de cada época; uma análise da atual política externa dos Estados Unidos, enfocando o debate entre unilateralismo e multilateralismo, com destaque para as reações geradas pela intervenção no Iraque; uma discussão crítica das abordagens que visualizam na agenda de segurança da administração Bush um indicador de perda de hegemonia, que imporia a substituição da busca do consenso pela dominação aberta.This article analyzes the position of the United States in the post-Cold War world, considering as a reference the controversies on the extension and limits of its hegemonic posture, which acquires greater relevance after the formulation of the "Bush Doctrine", systematized in the document "The National Security Strategy of the United States of America". Our approach will lay emphasis on the following aspects: establishment of a parallel between the transition of the XIX-XX and XX-XXI centuries, from studies that point out the characteristics of imperialism at different times; an analysis of the current foreign policy of the United States, focusing on the debate between unilateralism and multilateralism, emphasizing the reactions caused by the intervention in Iraq; a critical argument of the approaches that visualize in the security agenda of the Bush administration an indicator of a loss of hegemony, which would impose open domination over the search of consensus.

  2. Changes in forest composition, stem density, and biomass from the settlement era (1800s) to present in the upper Midwestern United States

    Science.gov (United States)

    Goring, Simon; Mladenoff, David J.; Cogbill, Charles; Record, Sydne; Paciorek, Christopher J.; Dietze, Michael C.; Dawson, Andria; Matthes, Jaclyn; McLachlan, Jason S.; Williams, John W.

    2016-01-01

    EuroAmerican land use and its legacies have transformed forest structure and composition across the United States (US). More accurate reconstructions of historical states are critical to understanding the processes governing past, current, and future forest dynamics. Gridded (8x8km) estimates of pre-settlement (1800s) forests from the upper Midwestern US (Minnesota, Wisconsin, and most of Michigan) using 19th Century Public Land Survey (PLS) records provide relative composition, biomass, stem density, and basal area for 26 tree genera. This mapping is more robust than past efforts, using spatially varying correction factors to accommodate sampling design, azimuthal censoring, and biases in tree selection. We compare pre-settlement to modern forests using Forest Inventory and Analysis (FIA) data, with respect to structural changes and the prevalence of lost forests, pre-settlement forests with no current analogue, and novel forests, modern forests with no past analogs. Differences between PLSS and FIA forests are spatially structured as a result of differences in the underlying ecology and land use impacts in the Upper Midwestern United States. Modern biomass is higher than pre-settlement biomass in the northwest (Minnesota and north-eastern Wisconsin, including regions that were historically open savanna), and lower in the east (eastern Wisconsin and Michigan), due to shifts in species composition and, presumably, average stand age. Modern forests are more homogeneous, and ecotonal gradients are more diffuse today than in the past. Novel forest assemblages represent 29% of all FIA cells, while 25% of pre-settlement forests no longer exist in a modern context. Lost forests are centered around the forests of the Tension Zone, particularly in hemlock dominated forests of north-central Wisconsin, and in oak-elm-basswood forests along the forest-prairie boundary in south central Minnesota and eastern Wisconsin. Novel FIA forest assemblages are distributed evenly across

  3. Structural health monitoring apparatus and methodology

    Science.gov (United States)

    Giurgiutiu, Victor (Inventor); Yu, Lingyu (Inventor); Bottai, Giola Santoni (Inventor)

    2011-01-01

    Disclosed is an apparatus and methodology for structural health monitoring (SHM) in which smart devices interrogate structural components to predict failure, expedite needed repairs, and thus increase the useful life of those components. Piezoelectric wafer active sensors (PWAS) are applied to or integrated with structural components and various data collected there from provide the ability to detect and locate cracking, corrosion, and disbanding through use of pitch-catch, pulse-echo, electro/mechanical impedance, and phased array technology. Stand alone hardware and an associated software program are provided that allow selection of multiple types of SHM investigations as well as multiple types of data analysis to perform a wholesome investigation of a structure.

  4. Casimir apparatuses in a weak gravitational field

    DEFF Research Database (Denmark)

    Bimonte, Giuseppe; Calloni, Enrico; Esposito, Giampiero;

    2009-01-01

    We review and assess a part of the recent work on Casimir apparatuses in the weak gravitational field of the Earth. For a free, real massless scalar field subject to Dirichlet or Neumann boundary conditions on the parallel plates, the resulting regularized and renormalized energy-momentum tensor...... is covariantly conserved, while the trace anomaly vanishes if the massless field is conformally coupled to gravity. Conformal coupling also ensures a finite Casimir energy and finite values of the pressure upon parallel plates. These results have been extended to an electromagnetic field subject to perfect...... conductor (hence idealized) boundary conditions on parallel plates, by various authors. The regularized and renormalized energy-momentum tensor has beene valuated up to second order in the gravity acceleration. In both the scalar and the electromagnetic case, studied to first order in the gravity...

  5. Self-healing cable apparatus and methods

    Science.gov (United States)

    Huston, Dryver (Inventor); Esser, Brian (Inventor)

    2007-01-01

    Self-healing cable apparatus and methods are disclosed. The cable has a central core surrounded by an adaptive cover that can extend over the entire length of the cable or just one or more portions of the cable. The adaptive cover includes a protective layer having an initial damage resistance, and a reactive layer. When the cable is subjected to a localized damaging force, the reactive layer responds by creating a corresponding localized self-healed region. The self-healed region provides the cable with enhanced damage resistance as compared to the cable's initial damage resistance. Embodiments of the invention utilize conventional epoxies or foaming materials in the reactive layer that are released to form the self-healed region when the damaging force reaches the reactive layer.

  6. Recirculation bubbler for glass melter apparatus

    Science.gov (United States)

    Guerrero, Hector; Bickford, Dennis

    2007-06-05

    A gas bubbler device provides enhanced recirculation of molten glass within a glass melter apparatus. The bubbler device includes a tube member disposed within a pool of molten glass contained in the melter. The tube member includes a lower opening through which the molten glass enters and upper slots disposed close to (above or below) the upper surface of the pool of molten glass and from which the glass exits. A gas (air) line is disposed within the tube member and extends longitudinally thereof. A gas bubble distribution device, which is located adjacent to the lower end of the tube member and is connected to the lower end of the gas line, releases gas through openings therein so as to produce gas bubbles of a desired size in the molten glass and in a distributed pattern across the tube member.

  7. Solar energy apparatus with apertured shield

    Science.gov (United States)

    Collings, Roger J. (Inventor); Bannon, David G. (Inventor)

    1989-01-01

    A protective apertured shield for use about an inlet to a solar apparatus which includesd a cavity receiver for absorbing concentrated solar energy. A rigid support truss assembly is fixed to the periphery of the inlet and projects radially inwardly therefrom to define a generally central aperture area through which solar radiation can pass into the cavity receiver. A non-structural, laminated blanket is spread over the rigid support truss in such a manner as to define an outer surface area and an inner surface area diverging radially outwardly from the central aperture area toward the periphery of the inlet. The outer surface area faces away from the inlet and the inner surface area faces toward the cavity receiver. The laminated blanket includes at least one layer of material, such as ceramic fiber fabric, having high infra-red emittance and low solar absorption properties, and another layer, such as metallic foil, of low infra-red emittance properties.

  8. Pulse compression and prepulse suppression apparatus

    Science.gov (United States)

    Dane, C.B.; Hackel, L.A.; George, E.V.; Miller, J.L.; Krupke, W.F.

    1993-11-09

    A pulse compression and prepulse suppression apparatus (10) for time compressing the output of a laser (14). A pump pulse (46) is separated from a seed pulse (48) by a first polarized beam splitter (20) according to the orientation of a half wave plate (18). The seed pulse (48) is directed into an SBS oscillator (44) by two plane mirrors (22, 26) and a corner mirror (24), the corner mirror (24) being movable to adjust timing. The pump pulse (46) is directed into an SBS amplifier 34 wherein SBS occurs. The seed pulse (48), having been propagated from the SBS oscillator (44), is then directed through the SBS amplifier (34) wherein it sweeps the energy of the pump pulse (46) out of the SBS amplifier (34) and is simultaneously compressed, and the time compressed pump pulse (46) is emitted as a pulse output (52). A second polarized beam splitter (38) directs any undepleted pump pulse 58 away from the SBS oscillator (44).

  9. Method and apparatuses for ion cyclotron spectrometry

    Science.gov (United States)

    Dahl, David A [Idaho Falls, ID; Scott, Jill R [Idaho Falls, ID; McJunkin, Timothy R [Idaho Falls, ID

    2012-03-06

    An ion cyclotron spectrometer may include a vacuum chamber that extends at least along a z-axis and means for producing a magnetic field within the vacuum chamber so that a magnetic field vector is generally parallel to the z-axis. The ion cyclotron spectrometer may also include means for producing a trapping electric field within the vacuum chamber. The trapping electric field may comprise a field potential that, when taken in cross-section along the z-axis, includes at least one section that is concave down and at least one section that is concave up so that ions traversing the field potential experience a net magnetron effect on a cyclotron frequency of the ions that is substantially equal to zero. Other apparatuses and a method for performing ion cyclotron spectrometry are also disclosed herein.

  10. A STUDY OF PSYCHIATRIC FACTORS IN PATIENTS PRESENTED WITH ATTEMPTED SUICIDE IN A STATE CAPITAL MEDICAL COLLEGE HOSPITAL IN CENTRAL INDIA

    Directory of Open Access Journals (Sweden)

    Keshav

    2016-01-01

    Full Text Available Suicide is one of the commonest psychiatric emergencies. According to WHO report, 1999 suicide was one of the top three leading causes of death among people aged 15-34 years in all countries. In recent years, attempted suicide has become the focus of research as it has been found to be the predictor of suicide. Psychiatric factors are one of the important determinants in attempted suicide. OBEJCTIVES The aim of the present study was to analyse the psychiatric factors in attempted suicide. METHODS The present study was conducted in the Department of Medicine and Department of Psychiatry, Gandhi Medical College and associated Hamidia Hospital Bhopal. Study based on the patients admitted in Medicine/Psychiatry ward or attending Out Patients Department with history of suicidal attempts, during the period December 2006 to November 2007. RESULTS Psychiatric disorders were present in 74.25%, while no psychiatric disorder was present in rest of 25.75%. CONCLUSION Major depressive disorder accounting for 34.69% cases, was the most common concurrent psychiatric illness among the study group.

  11. Eddy current separation apparatus, separation module, separation method and method for adjusting an eddy current separation apparatus

    NARCIS (Netherlands)

    Rem, P.C.; Bakker, M.C.M.; Berkhout, S.P.M.; Rahman, M.A.

    2012-01-01

    Eddy current separation apparatus (1) for separating particles (20) from a particle stream (w), wherein the apparatus (1) comprises a separator drum (4) adapted to create a first particle fraction (21) and a second particle fraction (23), a feeding device (2) upstream of the separator drum (4) for s

  12. Apparatus Measures Thermal Conductance Through a Thin Sample from Cryogenic to Room Temperature

    Science.gov (United States)

    Tuttle, James G.

    2009-01-01

    An apparatus allows the measurement of the thermal conductance across a thin sample clamped between metal plates, including thermal boundary resistances. It allows in-situ variation of the clamping force from zero to 30 lb (133.4 N), and variation of the sample temperature between 40 and 300 K. It has a special design feature that minimizes the effect of thermal radiation on this measurement. The apparatus includes a heater plate sandwiched between two identical thin samples. On the side of each sample opposite the heater plate is a cold plate. In order to take data, the heater plate is controlled at a slightly higher temperature than the two cold plates, which are controlled at a single lower temperature. The steady-state controlling power supplied to the hot plate, the area and thickness of samples, and the temperature drop across the samples are then used in a simple calculation of the thermal conductance. The conductance measurements can be taken at arbitrary temperatures down to about 40 K, as the entire setup is cooled by a mechanical cryocooler. The specific geometry combined with the pneumatic clamping force control system and the steady-state temperature control approach make this a unique apparatus.

  13. The Library of the Institute of Theoretical Astronomy of the R.A.S. (1924-1994). History, Present State, Perspectives for Future

    Science.gov (United States)

    Lapteva, M. V.

    Building up a specialized library collection of the Library of the Institute of Theoretical Astronomy of the Russian Academy of Sciences beginning with foundation of the Library (1924) up to the present time have been considered in their historical perspective. The main acquisition sources, stock figures, various parameters of the collection composi- tion, including information on rare foreign editions are also dealt with. The data on the existing retrieval systems and the perspectives of developing computerized problem directed reference bibliographic complexes are also considered.

  14. Method and apparatus for monitoring dynamic cardiovascular function using n-dimensional representatives of critical functions

    Science.gov (United States)

    Westinskow, Dwayne (Inventor); Agutter, James (Inventor); Syroid, Noah (Inventor); Strayer, David (Inventor); Albert, Robert (Inventor); Wachter, S. Blake (Inventor); Drews, Frank (Inventor)

    2010-01-01

    A method, system, apparatus and device for the monitoring, diagnosis and evaluation of the state of a dynamic pulmonary system is disclosed. This method and system provides the processing means for receiving sensed and/or simulated data, converting such data into a displayable object format and displaying such objects in a manner such that the interrelationships between the respective variables can be correlated and identified by a user. This invention provides for the rapid cognitive grasp of the overall state of a pulmonary critical function with respect to a dynamic system.

  15. Ariadne´s house (Pompeii, Italy wall paintings: A multidisciplinary study of its present state focused on a future restoration and preventive conservation

    Directory of Open Access Journals (Sweden)

    Pérez, M.C.

    2013-09-01

    Full Text Available This paper deals with the development of a multidisciplinary study on the current state of conservation of Ariadne's house (Pompeii, Italy, a domus of great archaeological value. The aim of this study is to undertake the preventive conservation actions required and increase the knowledge about its conservation and to generate discussions and points of view for a future restoration. Environmental studies, electromagnetic radiation measurements, study of materials and a photographical study were carried out. Those studies revealed that the rooftops covering the analyzed rooms resulting in adverse weather conditions causing grave damage to the conservation of the wall paintings. Thus, between 2009-2010 the rooftops were changed and new environmental studies were conducted. Studies of materials showed that the paintings match in execution and composition with those reported by other authors. The salts from modern mortars from previous restorations were affecting frescoes, also it is described a thin grayish surface layer from environmental contaminants.Este trabajo desarrolla un estudio multidisciplinar sobre el actual estado de conservación de la casa de Ariadna (Pompeya, Italia, domus de gran valor arqueológico. El objetivo es aumentar el conocimiento del estado actual de conservación de la casa para la discusión de una futura restauración. Para ello se realizaron estudios ambientales, mediciones de radiación electromagnética, estudio de materiales y un estudio fotográfico. Los estudios revelaron que los tejados que cubrían las salas analizadas estaban originando unas condiciones climatológicas adversas que se traducían en un grave daño para la conservación de las pinturas murales. Entre 2009-2010 se cambiaron las cubiertas y los estudios ambientales fueron repetidos. Los estudios de materiales demostraron que las pinturas coinciden en ejecución y composición con las señaladas por otros autores. Las sales procedentes de morteros

  16. Trabalho, abuso de drogas e os aparelhos ideológicos de estado: um estudo com alunos do ensino médio e fundamental Work, drug addiction and apparatus of state: a study with students of elementary and secondary school

    Directory of Open Access Journals (Sweden)

    Martial de Magalhães Câmara

    2010-01-01

    family privilege. The experience of drug abuse in childhood was measured in: North (2%, Northeast (6%, South and Southeast (5%. The prevailing age of the first drug use was found between 11 and 15 years old in all the regions, during the fundamental school degree. Certain agreement with Althuser's work on ideological apparatus of State was found. Family and religion were important protection factors against drug abuse.

  17. Energy Consumption and Carbon Dioxide Emissions of China’s Non-Metallic Mineral Products Industry: Present State, Prospects and Policy Analysis

    Directory of Open Access Journals (Sweden)

    Hui Hu

    2014-11-01

    Full Text Available China is the largest non-metallic mineral producer in the world and one of the key consumers of four major non-metallic mineral products, including cement, refractories, plate glass and ceramics. The non-metallic mineral products industry’s rapid growth has brought about a large demand for energy. The present study provides an overview of China’s non-metallic mineral products industry in terms of production, energy consumption and carbon dioxide emissions. In this industry, the energy efficiency is relatively low and the level of carbon dioxide emission is much higher than developed countries’ average. This study interprets the effects of some newly issued policies and analyses the influential factors in achieving energy conservation and emission reduction goals. It also discusses the prospects for saving energy and emission reduction in the industry. Retrofitting facilities and using new production technologies is imperative. Additionally, implementing market-based policies, promoting industrial transformation and effective international cooperation would help decrease carbon dioxide emissions and energy consumption.

  18. Apparatus for the measurement of total body nitrogen using prompt neutron activation analysis with californium-252.

    Science.gov (United States)

    Mackie, A; Hannan, W J; Smith, M A; Tothill, P

    1988-01-01

    Details of clinical apparatus designed for the measurement of total body nitrogen (as an indicator of body protein), suitable for the critically ill, intensive-care patient are presented. Californium-252 radio-isotopic neutron sources are used, enabling a nitrogen measurement by prompt neutron activation analysis to be made in 40 min with a precision of +/- 3.2% for a whole body dose equivalent of 0.145 mSv. The advantages of Californium-252 over alternative neutron sources are discussed. A comparison between two irradiation/detection geometries is made, leading to an explanation of the geometry adopted for the apparatus. The choice of construction and shielding materials to reduce the count rate at the detectors and consequently to reduce the pile-up contribution to the nitrogen background is discussed. Salient features of the gamma ray spectroscopy system to reduce spectral distortion from pulse pile-up are presented.

  19. Article separation apparatus and method for unit operations

    Science.gov (United States)

    Pardini, Allan F.; Gervais, Kevin L.; Mathews, Royce A.; Hockey, Ronald L.

    2010-06-22

    An apparatus and method are disclosed for separating articles from a group of articles. The apparatus includes a container for containing one or more articles coupled to a suitable fluidizer for suspending articles within the container and transporting articles to an induction tube. A portal in the induction tube introduces articles singly into the induction tube. A vacuum pulls articles through the induction tube separating the articles from the group of articles in the container. The apparatus and method can be combined with one or more unit operations or modules, e.g., for inspecting articles, assessing quality of articles, or ascertaining material properties and/or parameters of articles, including layers thereof.

  20. State Controled Avantgarde?

    DEFF Research Database (Denmark)

    Kreutzfeldt, Jacob

    2016-01-01

    apparatus of state radio. One example of this is the Danish writer Emil Bønnelyckes collaboration with Danish radio on Vore Dages København i Radiofoniske Billeder (Contemporary Copenhagen in Radiophonic Images) – a 4 and a half hour show broadcast prime time on Sunday evening 7. December 1930. According...

  1. Hormonas utilizadas como agentes ergogénicos: situación actual del problema Hormones used as ergogenics: present state of the question

    Directory of Open Access Journals (Sweden)

    C. Laudo

    2006-08-01

    Full Text Available En nuestra sociedad, la competición deportiva se ha convertido en el espectáculo que moviliza y reúne mayor número de personas en todo el mundo, con la correspondiente influencia cultural y económica que de ello deriva. Por lo que, los deseos de superación atlética han llevado a los deportistas a practicar intensos programas de entrenamiento y a recurrir al consumo de sustancias que mejoren su rendimiento, incurriendo en ocasiones en técnicas de dopaje. Actualmente, el dopaje es el resultado de una combinación de factores sociales, individuales, fisiológicos y culturales, que afecta no sólo a los deportistas profesionales, sino también a los deportistas aficionados. Para que su control y erradicación sea eficaz, es necesario un conocimiento del problema y de las sustancias más utilizadas, dentro de las cuales merecen especial atención las sustancias hormonales por su compleja detección y sus posibles repercusiones sobre la salud.Sporting competition in our society has become the spectacle that mobilises and brings together the greatest number of people throughout the world, with the corresponding cultural and economic influence that this implies. As a result, the desire for athletic prowess has led sportspersons to undergo intense training programs and to consume substances that improve their performance, at times having recourse to doping techniques. At present, doping is the result of a combination of social, individual, physiological and cultural factors, which affect not only professional, but also amateur sportspeople. In order for the control and eradication of doping to be efficient, it is necessary to understand the problem and the substances that are most employed, amongst which special mention is merited by hormonal substances due to the complexity of detecting them and their possible repercussions on health.

  2. Investigational study on the development, production and wide spread of welfare apparatus in north Europe; Hokuo ni okeru fukushi yogu no kaihatsu seisan fukyu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of grasping the present situation of the development/production/spread of welfare apparatus in north Europe, an investigation was conducted paying visits to Sweden and Denmark. Basically in the Swedish policy for handicapped persons, disablement is defined not only as features which belong to each individual, but as problems arising when the environment surrounding each individual touches one another. Moreover, characteristics of their policies on welfare apparatus are that major welfare apparatus can be provided for the disabled free of charge, and that the government and public organs play a major role in each step of the development, evaluation, distribution and provision of welfare apparatus. Features of the market of welfare apparatus are that users and buyers of the apparatus are different persons, that a public corporation called SUB participates in determining selling prices, etc., and that the market reflects needs and requests from users comparatively naturally. The needs for welfare apparatus at the Research Institute of Handicapped Persons are grasped through opinion exchanges with groups of handicapped persons or information exchanges with the technical aid center. 3 refs., 11 figs., 10 tabs.

  3. Corrosion behavior of F82H exposed to high temperature pressurized water with a rotating apparatus

    Science.gov (United States)

    Kanai, A.; Kasada, R.; Nakajima, M.; Hirose, T.; Tanigawa, H.; Enoeda, M.; Konishi, S.

    2014-12-01

    The present study reports the corrosion behavior of a reduced-activation ferritic martensitic steel F82H exposed to high temperature pressurized water for 28 and 100 h using a rotating disk apparatus at rotation speeds of 500 and 1000 rpm at a temperature of 573 K under a water pressure of 15 MPa with corrosion and/or flow-accelerated corrosion of F82H under the rotating condition.

  4. Apparatus and method for using radar to evaluate wind flow fields for wind energy applications

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, John; Hirth, Brian; Guynes, Jerry

    2017-02-21

    The present invention provides an apparatus and method for obtaining data to determine one or more characteristics of a wind flow field using one or more radars. Data is collected from the one or more radars, and analyzed to determine the one or more characteristics of the wind flow field. The one or more radars are positioned to have a portion of the wind flow field within a scanning sector of the one or more radars.

  5. An experimental apparatus for measuring the Casimir effect at large distances

    Energy Technology Data Exchange (ETDEWEB)

    Antonini, P; Carugno, G; Messineo, G [INFN sez di Padova, via Marzolo 8, 35131 Padova (Italy); Bimonte, G [Dipartimento di Scienze Fisiche Universita di Napoli Federico II Complesso Universitario MSA, Via Cintia, 80126 Napoli, Italy and INFN, Sezione di Napoli, Napoli (Italy); Bressi, G [INFN sez. di Pavia, via Bassi 6, 27100 Pavia (Italy); Galeazzi, G [Dipartimento di Fisica, Universita di Padova, via Marzolo 8, 35131 Padova (Italy); Ruoso, G, E-mail: Giuseppe.Ruoso@lnl.infn.i [INFN Lab. Naz. Legnaro, viale dell' Universita 2, 35020 Legnaro (Italy)

    2009-04-01

    An experimental set-up for the measurement of the Casimir effect at separations larger than a few microns is presented. The apparatus is based on a mechanical resonator and uses a homodyne detection technique to sense the Casimir force in the plane-parallel configuration. First measurements in the 3-10 micrometer range show an unexpected large force probably due to patch effects.

  6. The OPAL Detector (an~Omni~Purpose~Apparatus~for~Lep)

    CERN Multimedia

    Schaile, D A; Watson, N; Craciun, M; Hanson, G; Mcmahon, T J; Stokes, W; Wilson, G W; Carter, J; Plane, D; Scharff-hansen, P; Sahr, O M; Rembser, C; Saeki, T; Nisius, R; Campana, S; Kormos, L L; Marchant, T E; Takeda, H; Kupper, M; Hill, J C; Hajdu, C; Hauschild, M; Charlton, D; Kellogg, R; Kluth, S; Asai, S; Nellen, B; Bright-thomas, P; Polok, J; Guenther, P O; Keeler, R; Schwick, C; Stephens, K; Zankel, K; Watkins, P; Chang, C Y; Roney, M; Fischer, H; Dubbert, J

    2002-01-01

    The OPAL Detector (an Omni Purpose Apparatus for Lep) \\\\ \\\\OPAL, a general purpose detector, was designed to study a wide range of unexplored physics at LEP. \\\\ \\\\At LEP1, one of the central issues is the precise determination of the mass, width and couplings to quarks and leptons of the Z$^{0}$ boson. At LEP2 the mass and couplings of the W$^\\pm$ bosons are determined. Accurate measurements of these quantities might reveal the mechanisms by which symmetries are broken. Many topics relating to heavy flavours are studied, including the properties of tau leptons, and the spectroscopy, lifetimes and mixing of hadrons containing b-quarks. \\\\ \\\\There are very active QCD and Two-Photon groups. Among the topics being studied are the determination of the strong coupling constant, $ \\alpha _{S} $, tests of the group structure of QCD, differences between quark- and gluon-induced jets, many aspects of the fragmentation process measurements of many different final states in photon-photon collision, and measurement of str...

  7. The Golgi apparatus: insights from filamentous fungi.

    Science.gov (United States)

    Pantazopoulou, Areti

    2016-01-01

    Cargo passage through the Golgi, albeit an undoubtedly essential cellular function, is a mechanistically unresolved and much debated process. Although the main molecular players are conserved, diversification of the Golgi among different eukaryotic lineages is providing us with tools to resolve standing controversies. During the past decade the Golgi apparatus of model filamentous fungi, mainly Aspergillus nidulans, has been intensively studied. Here an overview of the most important findings in the field is provided. Golgi architecture and dynamics, as well as the novel cell biology tools that were developed in filamentous fungi in these studies, are addressed. An emphasis is placed on the central role the Golgi has as a crossroads in the endocytic and secretory-traffic pathways in hyphae. Finally the major advances that the A. nidulans Golgi biology has yielded so far regarding our understanding of key Golgi regulators, such as the Rab GTPases RabC(Rab6) and RabE(Rab11), the oligomeric transport protein particle, TRAPPII, and the Golgi guanine nucleotide exchange factors of Arf1, GeaA(GBF1/Gea1) and HypB(BIG/Sec7), are highlighted.

  8. Apparatuses in the manufacture of mineral wool

    Energy Technology Data Exchange (ETDEWEB)

    Gustafsson, J.; Moisala, T.

    1991-01-08

    In a process for manufacturing mineral wool, at the discharge section of the tapping spout to the spinning machine, at least one oxy-fuel burner is disposed. The burner is located at a predetermined distance and in a predetermined direction so that the discharge section of the tapping spout and a first portion of the tapping jet departing from the spout are heated by the burner flame, and the impulse of the burner is of such a size that the configuration and position of the tapping jet will remain unaffected. Employment of the apparatus of the invention will prevent molten mineral material in the spout jet from solidifying and accumulating on the tapping spout. This minimizes cleaning of the tapping spout, and an even and uniform spout jet will be continually led down towards the spinning wheels in the spinning machine, which results in a more uniform and even production in the spinning operation and a higher yield in the spinning process. Furthermore, because of the even, continuous jet of molten material, wear on the spinning wheels will be reduced and the working life of the spinning machine will be lengthened. 2 figs.

  9. Orthogonal ion injection apparatus and process

    Science.gov (United States)

    Kurulugama, Ruwan T; Belov, Mikhail E

    2014-04-15

    An orthogonal ion injection apparatus and process are described in which ions are directly injected into an ion guide orthogonal to the ion guide axis through an inlet opening located on a side of the ion guide. The end of the heated capillary is placed inside the ion guide such that the ions are directly injected into DC and RF fields inside the ion guide, which efficiently confines ions inside the ion guide. Liquid droplets created by the ionization source that are carried through the capillary into the ion guide are removed from the ion guide by a strong directional gas flow through an inlet opening on the opposite side of the ion guide. Strong DC and RF fields divert ions into the ion guide. In-guide orthogonal injection yields a noise level that is a factor of 1.5 to 2 lower than conventional inline injection known in the art. Signal intensities for low m/z ions are greater compared to convention inline injection under the same processing conditions.

  10. Sputtering process and apparatus for coating powders

    Science.gov (United States)

    Makowiecki, Daniel M.; Kerns, John A.; Alford, Craig S.; McKernan, Mark A.

    2002-01-01

    A process and apparatus for coating small particles and fibers. The process involves agitation by vibrating or tumbling the particles or fibers to promote coating uniformly, removing adsorbed gases and static charges from the particles or fibers by an initial plasma cleaning, and coating the particles or fibers with one or more coatings, a first coating being an adhesion coating, and with subsequent coatings being deposited in-situ to prevent contamination at layer interfaces. The first coating is of an adhesion forming element (i.e. W, Zr, Re, Cr, Ti) of a 100-10,000 .ANG. thickness and the second coating or final coating of a multiple (0.1-10 microns) being Cu or Ag, for example for brazing processes, or other desired materials that defines the new surface related properties of the particles. An essential feature of the coating process is the capability to deposit in-situ without interruption to prevent the formation of a contaminated interface that could adversely affect the coating adhesion. The process may include screening of the material to be coated and either continuous or intermittent vibration to prevent agglomeration of the material to be coated.

  11. Microwave Medical Treatment Apparatus and Method

    Science.gov (United States)

    Arndt, G. Dickey (Inventor); Ngo, Phong H. (Inventor); Carl, James R. (Inventor); George, W. Rflfoul (Inventor)

    2005-01-01

    Methods, simulations, and apparatus are provided that may be utilized for medical treatments which are especially suitable for treatment of benign prostatic hyperplasia (BPH). In a preferred embodiment, a plurality of separate microwave antennas are utilized to heat prostatic tissue to promote necrosing of the prostatic tissue that relieves the pressure of the prostatic tissue against the urethra as the body reabsorbs the necrosed or dead tissue. By utilizing constructive and destructive interference of the microwave transmission, the energy can be deposited on the tissues to be necrosed while protecting other tissues such as the urethra. Saline injections to alter the conductivity of the tissues may also be used to further focus the energy deposits. A computer simulation is Provided that can be used to Predict the resulting temperature profile produced in the prostatic tissue. By changing the various control features of one or more catheters and the methods of applying microwave energy, a temperature profile can be predicted and produced that is similar to the temperature profile desired for the particular patient.

  12. Method and apparatus for producing chlorine dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Santillie, P.W.; Ramras, D.M.

    1984-05-29

    A continuous method and apparatus are described for the efficient production of gaseous chlorine dioxide by the reaction between gaseous sulfur dioxide and an aqueous solution of a metallic chlorate. The chlorate solution and a highly concentrated sulfur dioxide gas are introduced into a packed columnar chamber at closely adjacent locations at the bottom of the chamber so as to flood the chamber and maximize both the contact area and contact time of the two reactants. Throughout the reaction the chamber is subjected to high vacuum imposed by an eductor which exhausts the chlorine dioxide gas and spent reactants. For use of the chlorine dioxide to produce potable water or treat foodstuffs, the chlorine dioxide and spent reactants are exhausted from the chamber separately by respective eductors substantially balanced with respect to each other to impose comparable vacuums upon the chamber. Because of the high efficency of the reaction, substantial heat is generated therefrom which is absorbed by a coolant flowing through a jacket surrounding the chamber. The flow rate of the coolant and flow rate of the reactants into the chamber are porportional due to the dependency of the reactant flow rate on the coolant flow rate.

  13. Apparatus for precision micromachining with lasers

    Science.gov (United States)

    Chang, J.J.; Dragon, E.P.; Warner, B.E.

    1998-04-28

    A new material processing apparatus using a short-pulsed, high-repetition-rate visible laser for precision micromachining utilizes a near diffraction limited laser, a high-speed precision two-axis tilt-mirror for steering the laser beam, an optical system for either focusing or imaging the laser beam on the part, and a part holder that may consist of a cover plate and a back plate. The system is generally useful for precision drilling, cutting, milling and polishing of metals and ceramics, and has broad application in manufacturing precision components. Precision machining has been demonstrated through percussion drilling and trepanning using this system. With a 30 W copper vapor laser running at multi-kHz pulse repetition frequency, straight parallel holes with size varying from 500 microns to less than 25 microns and with aspect ratios up to 1:40 have been consistently drilled with good surface finish on a variety of metals. Micromilling and microdrilling on ceramics using a 250 W copper vapor laser have also been demonstrated with good results. Materialographic sections of machined parts show little (submicron scale) recast layer and heat affected zone. 1 fig.

  14. Method of and apparatus for modeling interactions

    Science.gov (United States)

    Budge, Kent G.

    2004-01-13

    A method and apparatus for modeling interactions can accurately model tribological and other properties and accommodate topological disruptions. Two portions of a problem space are represented, a first with a Lagrangian mesh and a second with an ALE mesh. The ALE and Lagrangian meshes are constructed so that each node on the surface of the Lagrangian mesh is in a known correspondence with adjacent nodes in the ALE mesh. The interaction can be predicted for a time interval. Material flow within the ALE mesh can accurately model complex interactions such as bifurcation. After prediction, nodes in the ALE mesh in correspondence with nodes on the surface of the Lagrangian mesh can be mapped so that they are once again adjacent to their corresponding Lagrangian mesh nodes. The ALE mesh can then be smoothed to reduce mesh distortion that might reduce the accuracy or efficiency of subsequent prediction steps. The process, from prediction through mapping and smoothing, can be repeated until a terminal condition is reached.

  15. Formation and maintenance of the Golgi apparatus in plant cells.

    Science.gov (United States)

    Ito, Yoko; Uemura, Tomohiro; Nakano, Akihiko

    2014-01-01

    The Golgi apparatus plays essential roles in intracellular trafficking, protein and lipid modification, and polysaccharide synthesis in eukaryotic cells. It is well known for its unique stacked structure, which is conserved among most eukaryotes. However, the mechanisms of biogenesis and maintenance of the structure, which are deeply related to ER-Golgi and intra-Golgi transport systems, have long been mysterious. Now having extremely powerful microscopic technologies developed for live-cell imaging, the plant Golgi apparatus provides an ideal system to resolve the question. The plant Golgi apparatus has unique features that are not conserved in other kingdoms, which will also give new insights into the Golgi functions in plant life. In this review, we will summarize the features of the plant Golgi apparatus and transport mechanisms around it, with a focus on recent advances in Golgi biogenesis by live imaging of plants cells.

  16. Simple homemade apparatus for harvesting uncultured magnetotactic microorganisms

    Directory of Open Access Journals (Sweden)

    Lins Ulysses

    2003-01-01

    Full Text Available A simple apparatus for harvesting uncultured magnetotactic microorganisms is described. This apparatus consists of a glass container with two openings. A large opening on the topside is used to introduce the sediment and water. The sediment and water are previously stored in loosely capped bottles previously tested for the presence of magnetotactic bacteria. The apparatus is exposed to a properly aligned magnetic field of a homemade coil and the bacteria are removed through the capillary end of the second opening of the container. Harvested bacteria can then be used to ultrastrucutral studies using electron spectroscopic imaging. Large numbers of magnetotactic bacteria consisting of cocci and rod-shaped cells were efficiently collected from different environments. This apparatus is useful for microbiological studies on uncultured magnetotactic bacteria, especially in molecular approaches for phylogenetic investigations that give information on the natural diversity of microbial communities.

  17. Training Studies with Compressed Air Breathing Apparatus – Methodology, Exercises

    Directory of Open Access Journals (Sweden)

    Buks Roberts

    2015-11-01

    Full Text Available The current article describes topics ranging from the respiratory physiology and the structure of compressed air breathing apparatus to the performance of practical training exercises in an unbreathable environment (hereinafter referred to as UE.

  18. Improved apparatus for continuous culture of hydrogen-fixing bacteria

    Science.gov (United States)

    Foster, J. F.; Litchfield, J. H.

    1970-01-01

    Improved apparatus permits the continuous culture of Hydrogenomonas eutropha. System incorporates three essential subsystems - /1/ environmentally isolated culture vessel, /2/ analytical system with appropriate sensors and readout devices, /3/ control system with feedback responses to each analytical measurement.

  19. Wave energy transmission apparatus for high-temperature environments

    Science.gov (United States)

    Buckley, John D. (Inventor); Edwards, William C. (Inventor); Kelliher, Warren C. (Inventor); Carlberg, Ingrid A. (Inventor)

    2010-01-01

    A wave energy transmission apparatus has a conduit made from a refractory oxide. A transparent, refractory ceramic window is coupled to the conduit. Wave energy passing through the window enters the conduit.

  20. Apparatuses, Systems and Methods for Cleaning Photovoltaic Devices

    KAUST Repository

    Eitelhuber, Georg

    2013-02-14

    Embodiments of solar panel cleaning apparatuses, solar panel cleaning systems, and solar panel cleaning methods are disclosed. In certain embodiments, the disclosed solar panel cleaning apparatuses, systems and methods do may not require any water or other cleaning liquids in the whole cleaning process, which makes them prominent well suited in for water-deficit environments such as deserts. In one embodiment, the solar panel cleaning apparatus comprises one or more rotatable brushes each having a rotational axis and a drive configured to move each of the one or more rotatable brushes in a direction that is not perpendicular to the rotational axis. The solar panel cleaning apparatus is may be configured such that the angle of the rotational axis of at least one of the one or more rotatable brushes is adjustable relative to the direction of travel.

  1. Apparatus for handling micron size range particulate material

    Science.gov (United States)

    Friichtenicht, J. F.; Roy, N. L. (Inventor)

    1968-01-01

    An apparatus for handling, transporting, or size classifying comminuted material was described in detail. Electrostatic acceleration techniques for classifying particles as to size in the particle range from 0.1 to about 100 microns diameter were employed.

  2. A study of hyperelastic models for predicting the mechanical behavior of extensor apparatus.

    Science.gov (United States)

    Elyasi, Nahid; Taheri, Kimia Karimi; Narooei, Keivan; Taheri, Ali Karimi

    2017-01-16

    In this research, the nonlinear elastic behavior of human extensor apparatus was investigated. To this goal, firstly the best material parameters of hyperelastic strain energy density functions consisting of the Mooney-Rivlin, Ogden, invariants, and general exponential models were derived for the simple tension experimental data. Due to the significance of stress response in other deformation modes of nonlinear models, the calculated parameters were used to study the pure shear and balance biaxial tension behavior of the extensor apparatus. The results indicated that the Mooney-Rivlin model predicts an unstable behavior in the balance biaxial deformation of the extensor apparatus, while the Ogden order 1 represents a stable behavior, although the fitting of experimental data and theoretical model was not satisfactory. However, the Ogden order 6 model was unstable in the simple tension mode and the Ogden order 5 and general exponential models presented accurate and stable results. In order to reduce the material parameters, the invariants model with four material parameters was investigated and this model presented the minimum error and stable behavior in all deformation modes. The ABAQUS Explicit solver was coupled with the VUMAT subroutine code of the invariants model to simulate the mechanical behavior of the central and terminal slips of the extensor apparatus during the passive finger flexion, which is important in the prediction of boutonniere deformity and chronic mallet finger injuries, respectively. Also, to evaluate the adequacy of constitutive models in simulations, the results of the Ogden order 5 were presented. The difference between the predictions was attributed to the better fittings of the invariants model compared with the Ogden model.

  3. Method and apparatus of prefetching streams of varying prefetch depth

    Science.gov (United States)

    Gara, Alan [Mount Kisco, NY; Ohmacht, Martin [Yorktown Heights, NY; Salapura, Valentina [Chappaqua, NY; Sugavanam, Krishnan [Mahopac, NY; Hoenicke, Dirk [Seebruck-Seeon, DE

    2012-01-24

    Method and apparatus of prefetching streams of varying prefetch depth dynamically changes the depth of prefetching so that the number of multiple streams as well as the hit rate of a single stream are optimized. The method and apparatus in one aspect monitor a plurality of load requests from a processing unit for data in a prefetch buffer, determine an access pattern associated with the plurality of load requests and adjust a prefetch depth according to the access pattern.

  4. Mitotic apparatus: the selective extraction of protein with mild acid.

    Science.gov (United States)

    Bibring, T; Baxandall, J

    1968-07-26

    The treatment of isolated mitotic apparatus with mild (pH 3) hydrochloric acid results in the extraction of less than 10 percent of its protein, accompanied by the selective morphological disappearance of the microtubules. The same extraction can be shown to dissolve outer doublet microtubules from sperm flagella. A protein with points of similarity to the flagellar microtubule protein is the major component of the extract from mitotic apparatus.

  5. Microwave/Sonic Apparatus Measures Flow and Density in Pipe

    Science.gov (United States)

    Arndt, G. D.; Ngo, Phong; Carl, J. R.; Byerly, Kent A.

    2004-01-01

    An apparatus for measuring the rate of flow and the mass density of a liquid or slurry includes a special section of pipe instrumented with microwave and sonic sensors, and a computer that processes digitized readings taken by the sensors. The apparatus was conceived specifically for monitoring a flow of oil-well-drilling mud, but the basic principles of its design and operation are also applicable to monitoring flows of other liquids and slurries.

  6. STUDY ON COMPUETD APPARATUS FOR EXTERNAL CARDIAC MASSAGE AND ITS CLINICAL APPLICATION

    Institute of Scientific and Technical Information of China (English)

    LIU Mingshun; MENG Fanhang; ZHU Shouzeng

    2002-01-01

    Objectives To make and study computed apparatus for external cardiac massage and observe its clinieal effect. Method The apparatus was made and was applied. Result The apparatus was effective. Conclusion The apparatus was a effective equipment in treatment of patient with cardiac arrest.

  7. 46 CFR 78.47-27 - Self-contained breathing apparatus.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Self-contained breathing apparatus. 78.47-27 Section 78... Markings for Fire and Emergency Equipment, Etc. § 78.47-27 Self-contained breathing apparatus. Lockers or spaces containing self-contained breathing apparatus shall be marked “SELF-CONTAINED BREATHING APPARATUS.”...

  8. THE APPARATUS FOR ALIGNMENT OF THE PHOTOMETRIC LAMP FILAMENT

    Directory of Open Access Journals (Sweden)

    V. A. Dlugunovich

    2015-01-01

    Full Text Available During photometric measurements involving the use of photometric lamps it is necessary that the filament of lamp takes a strictly predetermined position with respect to the photodetector and the optical axis of the photometric setup. The errors in positioning of alignment filament with respect to the optical axis of the measuring system lead to increase the uncertainty of measurement of the photometric characteristics of the light sources. A typical method for alignment of filament of photometric lamps is based on the use a diopter tubes (telescopes. Using this method, the mounting of filament to the required position is carried out by successive approximations, which requires special concentration and a lot of time. The aim of this work is to develop an apparatus for alignment which allows simultaneous alignment of the filament of lamps in two mutually perpendicular planes. The method and apparatus for alignment of the photometric lamp filament during measurements of the photometric characteristics of light sources based on two digital video cameras is described in this paper. The apparatus allows to simultaneously displaying the image of lamps filament on the computer screen in two mutually perpendicular planes. The apparatus eliminates a large number of functional units requiring elementwise alignment and reduces the time required to carry out the alignment. The apparatus also provides the imaging of lamps filament with opaque coated on the bulb. The apparatus is used at the National standard of light intensity and illuminance units of the Republic of Belarus. 

  9. Optical glass: standards - present state and outlook

    Science.gov (United States)

    Hartmann, Peter

    2015-10-01

    In 1996, the international organization for standardization ISO started the standards series ISO 10110 specifying indications in drawings of optical elements. Three parts cover material properties: part 2 (stress birefringence), 3 (bubbles and inclusions), and 4 (inhomogeneity and striae). Customers used to just send optical element drawings to glass manufacturers often leading to uncertainty, overspecification, and delivery problems. The raw glass standard ISO 12123 of 2010 allows direct addressing of raw glass specifications. Harmonizing ISO 10110 with ISO 12123 and progress in inspection methods require updating of the material specifying parts. A new part 18 containing all properties is under preparation and is meant to replace parts 2-4. ISO 12123 will be amended by introducing definitions for relative partial dispersions and reference normal lines and grade denominations for tolerance ranges. The working draft ISO/WD 10110 part 18 extends indication possibilities to allow relating to ISO 12123 while ensuring backward compatibility. Default optical glass quality and direct specification of raw glass simplify tolerancing considerably. Annexes support selection of appropriate quality classes referring to optical element size categories. Test and inspection standards on chemical resistances, hardness, stress birefringence, and optical homogeneity will be maintained. Standards for water resistance, refractive index, and striae inspection are being prepared.

  10. [Proterozoic history and present state of cyanobacteria].

    Science.gov (United States)

    Sergeev, V N; Gerasimenko, L M; Zavarzin, G A

    2002-01-01

    The paper delves into the main regularities of the distribution of fossil microorganisms in Precambrian rocks, beginning from the Archean Eon about 3.5 billion years ago and ending in the Cambrian Period about 0.5 billion years ago. The paper analyzes facial peculiarities in the lateral differentiation of microfossils in Proterozoic basins and the main stages of temporal changes in fossil cyanobacterial communities, which are based on the irreversible succession of physicochemical conditions on the Earth and the evolution of eukaryotic microorganisms and their incorporation into prokaryotic ecosystems. To gain insight into Proterozoic fossil records, modern stratified cyanobacterial mats built up from layers of prokaryotes are considered. The analysis of phosphatization, carbonatization, and silification processes in modern algal-bacterial communities suggests that analogous processes took place in Proterozoic microbiotas. A comparison of modern and Precambrian living forms confirms the inference that cyanobacterial communities are very conservative and have changed insignificantly both morphologically and physiologically during the past two billion years.

  11. Minimum rotation speed to prevent coning phenomena in compendium paddle dissolution apparatus.

    Science.gov (United States)

    Higuchi, Mizuki; Yoshihashi, Yasuo; Tarada, Katsuhide; Sugano, Kiyohiko

    2014-12-18

    The purpose of the present study was to investigate the applicability of the Zwietering equation to coning phenomena which often occur during dissolution testing. The minimum rotation speed at which coning phenomena disappeared (no coning rpm, NCrpm) was experimentally determined for various particle and fluid properties in a compendium paddle apparatus with a round-bottom unbaffled vessel. The particle size, relative density and kinematic viscosity exponents in the Zwietering equation were optimized for NCrpm. The particle size and relative density exponents were found to be similar with those for the general tank configurations of cylindrical flat-bottom baffled vessels. However, the kinematic viscosity exponent was significantly different. The equation obtained in this study showed sufficient accuracy (r(2)=0.98, average error=12rpm) to estimate the occurrence of coning. The Zwietering equation was found to be applicable to the coning phenomena in the compendium paddle apparatus.

  12. Apparatus for hydrogen and carbon production via carbon aerosol-catalyzed dissociation of hydrocarbons

    Science.gov (United States)

    Muradov, Nazim Z. (Inventor); Smith, Franklyn (Inventor); Tabatabaie-Raissi, Ali (Inventor)

    2012-01-01

    A novel process and apparatus is disclosed for sustainable, continuous production of hydrogen and carbon by catalytic dissociation or decomposition of hydrocarbons at elevated temperatures using in-situ generated carbon particles. Carbon particles are produced by decomposition of carbonaceous materials in response to an energy input. The energy input can be provided by at least one of a non-oxidative and oxidative means. The non-oxidative means of the energy input includes a high temperature source, or different types of plasma, such as, thermal, non-thermal, microwave, corona discharge, glow discharge, dielectric barrier discharge, or radiation sources, such as, electron beam, gamma, ultraviolet (UV). The oxidative means of the energy input includes oxygen, air, ozone, nitrous oxide (NO.sub.2) and other oxidizing agents. The method, apparatus and process of the present invention is applicable to any gaseous or liquid hydrocarbon fuel and it produces no or significantly less CO.sub.2 emissions compared to conventional processes.

  13. Apparatus for emulsion production in small scale and under controlled shear conditions

    DEFF Research Database (Denmark)

    Adler-Nissen, Jens; Mason, Sarah; Jacobsen, Charlotte

    2004-01-01

    small quantities of homogeneous emulsion formulations containing costly ingredients formed the impetus for this work. We present a set of emulsion production experiments using a model mayonnaise recipe with a weight percentage of dispersed oil of 80%, and illustrate the effect of rotor speed...... to rotor speed and geometry was also calculated. We discuss the scale-up of emulsion production, giving consideration to the length of time the shear stress is applied as well as to the magnitude of the shear stress.......In this article, a rotor-stator apparatus for the production of 5 g batches of emulsion is introduced. Special attention was paid to the design of the apparatus and its construction, ensuring close tolerances in all machined parts. The size of the dispersing gap was 500 µm. The need to prepare...

  14. Morphological characterization of the venom apparatus in the wolf spider Lycosa singoriensis (Laxmann, 1770

    Directory of Open Access Journals (Sweden)

    N Yigit

    2009-01-01

    Full Text Available The wolf spider Lycosa singoriensis (Laxmann, 1770 (Lycosidae: Araneae is distributed throughout central and eastern Europe, including Russia, Kazakhistan and Turkey. This study describes the venom apparatus morphology of L. singoriensis through scanning electron microscopy (SEM. Its structure follows the general architecture observed in other spiders. Generally, a venom apparatus is composed by a pair of venom glands and chelicerae. L. singoriensis chelicerae are robust and consist of a stout basis and a movable apical segment (fang. The fang rests in a groove on the basal segment that is covered by different types of hair. L. singoriensis venom glands present equal size and measure about 4 mm in length. Each gland is enclosed by irregular muscular layers.

  15. A portable X-ray apparatus with GaAs linear array

    Energy Technology Data Exchange (ETDEWEB)

    Ardashev, E.N.; Gorokhov, S.A. [Institute of High Energy Physics, 142281 Protvino (Russian Federation); Polkovnikov, M.K., E-mail: pmk@ihep.ru [Institute of High Energy Physics, 142281 Protvino (Russian Federation); Lobanov, I.S.; Vorobiev, A.P. [Institute of High Energy Physics, 142281 Protvino (Russian Federation)

    2011-08-21

    The widely growing interest to the digital diagnostics and analysis systems, that have many advantages in comparison with the traditional (film) systems, in data taking, data storing, and data transmitting, requires a new detection technology. One of the most promising system for medical radiography today is a scanning type apparatus with some linear array detectors. The constructed apparatus is a device with some semiconductor GaAs detectors as sensitive elements to form the image while scanning an object. GaAs detectors are the detectors of the direct transformation of X-ray radiation into the electrical. The present paper describes the results of the construction and testing of the portable X-ray unit for traumatic examination and orthopedic manipulation in stationer clinics and at the first aid in medicine of catastrophe.

  16. A portable X-ray apparatus with GaAs linear array

    Science.gov (United States)

    Ardashev, E. N.; Gorokhov, S. A.; Polkovnikov, M. K.; Lobanov, I. S.; Vorobiev, A. P.

    2011-08-01

    The widely growing interest to the digital diagnostics and analysis systems, that have many advantages in comparison with the traditional (film) systems, in data taking, data storing, and data transmitting, requires a new detection technology. One of the most promising system for medical radiography today is a scanning type apparatus with some linear array detectors. The constructed apparatus is a device with some semiconductor GaAs detectors as sensitive elements to form the image while scanning an object. GaAs detectors are the detectors of the direct transformation of X-ray radiation into the electrical. The present paper describes the results of the construction and testing of the portable X-ray unit for traumatic examination and orthopedic manipulation in stationer clinics and at the first aid in medicine of catastrophe.

  17. Bodies or organisms? Medical encounter as a control apparatus at a primary care centre in Barcelona

    Directory of Open Access Journals (Sweden)

    Alejandro Zaballos Samper

    2013-07-01

    Full Text Available Medical practice is driven by technology, discourses, and knowledge about health and illness. This has resulted in its gaining a dominating position in power relations achieved by means of diagnosis, medicalization, and habit and conduct creation and maintenance. Interaction at primary care centres is built on mainstream biomedical views of both the medical discourse and the social practices related to health, illness and the human body. Moreover, it is also rooted on the ideologies conveyed by those social concepts, which in turn, permeate interaction all through with power relations. The present paper takes ethnographic data and in-depth interviews as a departing point to analyse how diagnosis, medicalization, and biopolicies for health prevention and improvement carried out in primary care centres in Barcelona make up a control apparatus. Furthermore, this essay also explores how the apparatus is developed in the medical encounter and turns the body into an organism.

  18. Apparatus for ``in vivo'' exposure at 1.8 GHz microwaves

    Science.gov (United States)

    Biagi, P. Francesco; Righetti, F.; Maggipinto, T.; Maggipinto, G.; Ligonzo, T.; Schiavulli, L.; Loiacono, D.; Casamassima, G.; De Carne, G.; Laterza, G.; Ermini, A.; Lasalvia, M.; Perna, G.; Capozzi, V.

    2011-07-01

    In a previous study, an apparatus generating 1.8 GHz electromagnetic radiation for ``in vivo'' biomedical study was designed and implemented. The apparatus consisted of a reverberation chamber and it reproduced a habitat similar to the usual one for the laboratory animals. Plexiglas boxes with 300 cc physiological liquid were utilized as simple phantoms. For the measurements a small Electric Field Probe was used. The maximum SAR (Specific Absorption Rate) and average Power Efficiency Pe (SAR/input power) values obtained were quite low (``in vivo experiments'') and this was the drawback of the apparatus. In the present work, different modifications introduced in order to increase SAR and Power Efficiency are presented. In the new configuration, the dosimetry for the previous phantoms and for oil-in-gelatine phantoms was investigated and quite satisfactory SAR and Power Efficiency values were obtained, overcoming the previous drawback. In the first case the sensor was waterproofed, as in the previous study; in the other case a Plexiglas box with inside a tight shaped allocation for the measurement probe was realized. These measurement technologies could be applied to other media used for the phantoms.

  19. Proteomic Dissection of the Mitochondrial DNA Metabolism Apparatus in Arabidopsis

    Energy Technology Data Exchange (ETDEWEB)

    SAlly A. Mackenzie

    2004-01-06

    This study involves the investigation of nuclear genetic components that regulate mitochondrial genome behavior in higher plants. The approach utilizes the advanced plant model system of Arabidopsis thaliana to identify and functionally characterize multiple components of the mitochondrial DNA replication, recombination and mismatch repair system and their interaction partners. The rationale for the research stems from the central importance of mitochondria to overall cellular metabolism and the essential nature of the mitochondrial genome to mitochondrial function. Relatively little is understood about mitochondrial DNA maintenance and transmission in higher eukaryotes, and the higher plant mitochondrial genome displays unique properties and behavior. This investigation has revealed at least three important properties of plant mitochondrial DNA metabolism components. (1) Many are dual targeted to mitochondrial and chloroplasts by novel mechanisms, suggesting that the mitochondria a nd chloroplast share their genome maintenance apparatus. (2)The MSH1 gene, originating as a component of mismatch repair, has evolved uniquely in plants to participate in differential replication of the mitochondrial genome. (3) This mitochondrial differential replication process, termed substoichiometric shifting and also involving a RecA-related gene, appears to represent an adaptive mechanism to expand plant reproductive capacity and is likely present throughout the plant kingdom.

  20. Interaction of actin and the chloroplast protein import apparatus.

    Science.gov (United States)

    Jouhet, Juliette; Gray, John C

    2009-07-10

    Actin filaments are major components of the cytoskeleton and play numerous essential roles, including chloroplast positioning and plastid stromule movement, in plant cells. Actin is present in pea chloroplast envelope membrane preparations and is localized at the surface of the chloroplasts, as shown by agglutination of intact isolated chloroplasts by antibodies to actin. To identify chloroplast envelope proteins involved in actin binding, we have carried out actin co-immunoprecipitation and co-sedimentation experiments on detergent-solubilized pea chloroplast envelope membranes. Proteins co-immunoprecipitated with actin were identified by mass spectrometry and by Western blotting and included the Toc159, Toc75, Toc34, and Tic110 components of the TOC-TIC protein import apparatus. A direct interaction of actin with Escherichia coli-expressed Toc159, but not Toc33, was shown by co-sedimentation experiments, suggesting that Toc159 is the component of the TOC complex that interacts with actin on the cytosolic side of the outer envelope membrane. The physiological significance of this interaction is unknown, but it may play a role in the import of nuclear-encoded photosynthesis proteins.

  1. Method and apparatus for operating an improved thermocline storage unit

    Science.gov (United States)

    Copeland, Robert J.

    1985-01-01

    A method and apparatus for operating a thermocline storage unit in which an insulated barrier member is provided substantially at the interface region between the hot and cold liquids in the storage tank. The barrier member physically and thermally separates the hot and cold liquids substantially preventing any diffusing or mixing between them and substantially preventing any heat transfer therebetween. The barrier member follows the rise and fall of the interface region between the liquids as the tank is charged and discharged. Two methods of maintaining it in the interface region are disclosed. With the structure and operation of the present invention and in particular the significant reduction in diffusing or mixing between the hot and cold liquids as well as the significant reduction in the thermal heat transfer between them, the performance of the storage tank is improved. More specifically, the stability of the interface region or thermocline is enhanced and the thickness of the thermocline is reduced producing a corresponding increase in the steepness of the temperature gradient across the thermocline and a more efficiently operating thermocline storage unit.

  2. Versatile in situ gas analysis apparatus for nanomaterials reactors.

    Science.gov (United States)

    Meysami, Seyyed Shayan; Snoek, Lavina C; Grobert, Nicole

    2014-09-02

    We report a newly developed technique for the in situ real-time gas analysis of reactors commonly used for the production of nanomaterials, by showing case-study results obtained using a dedicated apparatus for measuring the gas composition in reactors operating at high temperature (nanomaterials with tailored properties. Our studies demonstrate that the composition of the precursors dynamically changes as they travel inside of the reactor, causing a nonuniform growth of nanomaterials. Moreover, mapping of the nanomaterials reactor using quantitative gas analysis revealed the actual contribution of thermocatalytic cracking and a quantification of individual precursor fragments. This information is particularly important for quality control of the produced nanomaterials and for the recycling of exhaust residues, ultimately leading toward a more cost-effective continuous production of nanomaterials in large quantities. Our case study of multiwall carbon nanotube synthesis was conducted using the probe in conjunction with chemical vapor deposition (CVD) techniques. Given the similarities of this particular CVD setup to other CVD reactors and high-temperature setups generally used for nanomaterials synthesis, the concept and methodology of in situ gas analysis presented here does also apply to other systems, making it a versatile and widely applicable method across a wide range of materials/manufacturing methods, catalysis, as well as reactor design and engineering.

  3. Method and Apparatus for Thermal Spraying of Metal Coatings Using Pulsejet Resonant Pulsed Combustion

    Science.gov (United States)

    Paxson, Daniel E. (Inventor)

    2014-01-01

    An apparatus and method for thermal spraying a metal coating on a substrate is accomplished with a modified pulsejet and optionally an ejector to assist in preventing oxidation. Metal such as Aluminum or Magnesium may be used. A pulsejet is first initiated by applying fuel, air, and a spark. Metal is inserted continuously in a high volume of metal into a combustion chamber of the pulsejet. The combustion is thereafter controlled resonantly at high frequency and the metal is heated to a molten state. The metal is then transported from the combustion chamber into a tailpipe of said pulsejet and is expelled therefrom at high velocity and deposited on a target substrate.

  4. Effect of motor vehicle emission on assimilative apparatus of decorative ornamental plants

    Directory of Open Access Journals (Sweden)

    O. P. Pryimak

    2011-12-01

    Full Text Available The effect of motor vehicle emission ingredients on the state of assimilative apparatus of decorative ornamental plants is studied in Dnepropetrovsk. The morphometric indices of leaves of studied species are discussed. The changes of the leaves area and their amount on a plant are shown. The damages of assimilative organs and its structure abnormalities are revealed. The negative influence of motor transport emission on forming and growth of leaves was determined. The Aster novі-belgii L. and Tagetes patula L. are resistant, but Begonia×semperflorens hort, Salvia splendens L. and Zinnia elegans Jacq. are sensitive to the influence of emissions.

  5. Proposed apparatus for measuring internal friction in rocks at high temperatures and pressures: a design analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bonner, B.P.

    1977-10-03

    An apparatus is described that measures internal friction in rocks at high temperatures (approximately 800/sup 0/C) and pressures (approximately 1.0 GPa). Steady oscillations (approximately 1.0 Hz) are induced in a jacketed sample while coaxial capacitive transducers monitor the resulting radial strain. Sample strains are continuously compared to the deformation of a low-loss standard, which acts as a stress transducer. The stress state produced is uniaxial stress. We use the theory of viscoelasticity to partition the loss into components depending on pure shear and dilatation. The theoretical results emphasize the importance of ultimately measuring each loss independently.

  6. The Golgi apparatus is a primary site of intracellular damage after photosensitization with Rose Bengal acetate

    Directory of Open Access Journals (Sweden)

    C Soldani

    2009-06-01

    Full Text Available The aim of the present investigation was to elucidate whether the Golgi apparatus undergoes photodamage following administration of the fluorogenic substrates Rose Bengal acetate (RBAc and irradiation at the appropriate wavelength. Human HeLa cells were treated in culture and the changes in the organization of the Golgi apparatus were studied using fluorescence confocal microscopy and electron microscopy, after immunocytochemical labeling. To see whether the cytoskeletal components primarily involved in vescicle traffic (i.e., microtubules might also be affected, experiments of tubulin immunolabeling were performed. After treatment with RBAc and irradiation, cells were allowed to grow in drug-free medium for different times. 24hr after irradiation, the cisternae of the Golgi apparatus became packed, and after 48-72 hr they appeared more fragmented and scattered throughout the cytoplasm; these changes in the organization of the Golgi cisternae were confirmed at electron microscopy. Interestingly enough, apoptosis was found to occur especially 48-72h after irradiation, and apoptotic cells exhibited a dramatic fragmentation of the Golgi membranes. The immunolabeling with anti-tubulin antibody showed that microtubules were also affected by irradiation in RBAc-treated cells.

  7. Development and application of PIE apparatuses in Tokai hot cell facilities

    Energy Technology Data Exchange (ETDEWEB)

    Amano, Hidetoshi; Kodaira, Tsuneo; Sukegawa, Tomohide [Department of Hot Laboratories, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan)

    1999-08-01

    The Department of Hot Laboratories (DHL) operates three hot cell facilities, which are the Reactor Fuel Examination Facility (RFEF), the Research Hot Laboratory (RHL) and the Waste Safety Testing Facility (WASTEF). The RFEF is especially examining the reliability of actual power reactor fuel assemblies for PWR and BWR. The RHL is established to perform post irradiation examinations (PIEs) for fuels and materials irradiated in research and test reactors. In the WASTEF, Synroc and new ceramic waste forms were prepared and investigated for the safety disposal of high level radioactive waste. At present, one of concentrated works is the PIE of high burnup fuels, for which the RFEF improved and developed several apparatuses such as thermal properties measurement and microscopic analysis. The other is the PIE concerning with studies of component aging and structural reliability, for which the charpy impact-testing machine is instrumented and a low-cycle and high-cycle fatigue test apparatus is now under developing in the RHL. This paper describes these development and application of PIE apparatuses in DHL. (author)

  8. Apparatus for measuring pressure-driven transport through channels at high Knudsen numbers

    Science.gov (United States)

    Karakitsiou, S.; Holst, B.; Hoffmann, A. C.

    2016-12-01

    The pressure-driven gas flow through micro- and nano-porous structures is particularly interesting for innovative technologies such as microelectromechanical and nano-mechanical-electrical systems. The classical continuum assumption breaks down for rarefied flow through channels with a characteristic dimension comparable to the mean free path of the gas. Theories based on molecular interactions have been formulated to predict the flow at high Knudsen numbers. Measuring rarefied gas flow experimentally is a challenge since only a few studies have been able to determine flowrates in the molecular flow regime. Here we present the design of an experimental apparatus, which can be used to measure the flow of gases through nano- and microscale channels in the flow regimes where molecular effects are critical. The equations used to design the apparatus are given, focusing on the slip and transition flow regimes (together sometimes called "Intermediate flow regime"). A channel with a diameter of 325 μm ± 5μm and a length of 2 mm was tested experimentally with the apparatus for a wide range of Knudsen numbers (10-2 < Kn < 1 × 105) demonstrating its suitability through the slip and transition regime (2.23 × 10-2 < Kn < 2.26).

  9. ON IMPROVING THE ENERGY SUPPLY OF BATCH DYEING APPARATUSES IN THE LIGHT INDUSTRY ENTERPRISES

    Directory of Open Access Journals (Sweden)

    V. N. Romaniuk

    2016-01-01

    Full Text Available The paper offers the results of pinch analysis, thermodynamic analysis based on exergy method that determine the energy-supply efficacy enhancement variants for the processing equipment in the light industry finishing production as exemplified by the apparatuses of batch operation for textile dyeing. Scientifically substantiated improvement feasibility estimation for the Belarusian light industry enterprises thermo-technological production energy supply is of current concern and in demand in the existing economic situation. Exergy method allows obtaining the indicated estimation by the simplest and most logical way as against the other methods of thermodynamic analysis e.g. entropy method or employing the cycle theory. Pinch analysis employment not only allows verifying the estimation results but also points out the problem spots demanding cardinal changes and modernization. This complex approach renders possible outlining simple ways of energy saving in the existing technical systems of substance transformation, which is important under the conditions of operating production for successful handling the problem of lowering production costs. The example of the most widespread thermo-technological production of the light industry illustrates the above stated. For most enterprises of the republic, it remains problematic in many ways. The suggested ways of solving the problem are not exhaustive and offer evolutionary changes that secure economic indicators fitting the dictates of time and the enterprises capabilities. Another critical factor of the presented analysis and ways for thermo-technological energy supply improvement is that the proposed changes can realize on basis of the equipment that established a good reputation during continuous service in different productions and manufactured in the republic in working partnership with foreign design engineers. 

  10. Method and apparatus to debug an integrated circuit chip via synchronous clock stop and scan

    Science.gov (United States)

    Bellofatto, Ralph E [Ridgefield, CT; Ellavsky, Matthew R [Rochester, MN; Gara, Alan G [Mount Kisco, NY; Giampapa, Mark E [Irvington, NY; Gooding, Thomas M [Rochester, MN; Haring, Rudolf A [Cortlandt Manor, NY; Hehenberger, Lance G [Leander, TX; Ohmacht, Martin [Yorktown Heights, NY

    2012-03-20

    An apparatus and method for evaluating a state of an electronic or integrated circuit (IC), each IC including one or more processor elements for controlling operations of IC sub-units, and each the IC supporting multiple frequency clock domains. The method comprises: generating a synchronized set of enable signals in correspondence with one or more IC sub-units for starting operation of one or more IC sub-units according to a determined timing configuration; counting, in response to one signal of the synchronized set of enable signals, a number of main processor IC clock cycles; and, upon attaining a desired clock cycle number, generating a stop signal for each unique frequency clock domain to synchronously stop a functional clock for each respective frequency clock domain; and, upon synchronously stopping all on-chip functional clocks on all frequency clock domains in a deterministic fashion, scanning out data values at a desired IC chip state. The apparatus and methodology enables construction of a cycle-by-cycle view of any part of the state of a running IC chip, using a combination of on-chip circuitry and software.

  11. Report on a comprehensive research study (home welfare apparatus system - lifestyle); Sogo chosa kenkyu (zaitaku fukushi kiki system - lifestyle) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    An investigational study was conducted on evacuation of aged people at disaster, life maintenance, and welfare apparatus which is applicable to the future change of life style and its harmony with the living environment. In the study of care apparatus, reported were the apparatus operational interface using the indoor environmental control simulation system, safety on moving/transfer equipment, experiment on opening/closing power of sliding doors, study of electric-driven wheel chairs, study of the sitting pressure of various wheel chairs, etc. In relation to the living environment, the paper reported planning of houses introducing care apparatus, assessment of system kitchen, disaster prevention measures for aged/handicapped people, study on performance of the combined use in the living environment, assessment of drops in floor level in the living space, etc. Also reported were assessment on the living environmental control state of serious paralyzers of the limbs, study of a network to support care at home, etc. 48 refs., 117 figs., 29 tabs.

  12. Golgi apparatus and protein trafficking in Alzheimer's disease.

    Science.gov (United States)

    Baloyannis, Stavros J

    2014-01-01

    Alzheimer's disease (AD) is a progressive degeneration of the brain, inducing memory decline, inability in learning, and behavioral alterations, resulting progressively in a marked deterioration of all mental activities and eventually a vegetative state. The main causative factor, however, is still unclear. The implication of amyloid-β, AβPP, tau protein, the selective loss of neurons, the alteration of the synapses, the cytoskeletal changes, and the morphological alterations of the brain capillaries contribute substantially to the pathogenetic profile of the disease, without sufficiently enlightening the initial steps of the pathological procedures. The ultrastructure of the neuronal organelles as well as histochemical studies revealed substantial alterations, primarily concerning mitochondria. In this study, the morphological and morphometric alterations of the Golgi apparatus (GA) are described in the Purkinje cells of the cerebellum in twenty AD brains, studied with electron microscopy. As it is well established, GA has a very important role to play in many procedures such as glycosylation, sulfation, and proteolysis of protein systems, which are synthesized in the endoplasmic reticulum of nerve cells and glia. GA may also play a crucial role in protein trafficking and in misfolding of protein aggregates. In addition, the hyperphosphorylation of tau protein is closely related with the pathology of GA. In AD cases, described in this study, an obvious fragmentation of the cisternae of GA was observed in the Purkinje cells of the vermis and the cerebellar hemispheres. This alteration of GA may be associated with alterations of microtubules, impaired protein trafficking, and dendritic, spinal, and synaptic pathology, since protein trafficking plays an essential role in the three dimensional organization of the dendritic arbor and in the integrity of the synaptic components.

  13. Phase change thermal control materials, method and apparatus

    Science.gov (United States)

    Buckley, Theresa M. (Inventor)

    2001-01-01

    An apparatus and method for metabolic cooling and insulation of a user in a cold environment. In its preferred embodiment the apparatus is a highly flexible composite material having a flexible matrix containing a phase change thermal storage material. The apparatus can be made to heat or cool the body or to act as a thermal buffer to protect the wearer from changing environmental conditions. The apparatus may also include an external thermal insulation layer and/or an internal thermal control layer to regulate the rate of heat exchange between the composite and the skin of the wearer. Other embodiments of the apparatus also provide 1) a path for evaporation or direct absorption of perspiration from the skin of the wearer for improved comfort and thermal control, 2) heat conductive pathways within the material for thermal equalization, 3) surface treatments for improved absorption or rejection of heat by the material, and 4) means for quickly regenerating the thermal storage capacity for reuse of the material. Applications of the composite materials are also described which take advantage of the composite's thermal characteristics. The examples described include a diver's wet suit, ski boot liners, thermal socks, gloves and a face mask for cold weather activities, and a metabolic heating or cooling blanket useful for treating hypothermia or fever patients in a medical setting and therapeutic heating or cooling orthopedic joint supports.

  14. Crystallography: past and present

    Science.gov (United States)

    Hodeau, J.-L.; Guinebretiere, R.

    2007-12-01

    structure (chemical order, anisotropy, charge transfer, magnetic order) versus an external parameter like temperature, pressure, magnetic or electric field. Modern crystallography is also extended to the study of very small crystals, powders, ill-ordered or non-crystallized materials. Thus presently, crystallography is concerned with any solid that “scatters” an incident beam. Nevertheless, as quoted by A. Guinier, “the problems facing crystallographers have only changed, ... new ones have appeared which require reflection and imagination, ... and which in turn may still bring much joy to all those who like crystallography” [4]. Such developments open up crystallography to modern materials like artificial ones and nanostructures with low- and/or multi-scaled-periodicities and/or extremely small “crystal size” and to materials of the “real world”, with mixtures of phases and/or amorphous contribution and/or defects, a common characteristic of ancient materials analysed in patrimonial research. In our contribution we will show by selected examples that these improvements were allowed (i) by the use of powerful sources, apparatus and detectors which allow micro-diffraction, in-situ diffraction, spectroscopy, resonant scattering, inelastic scattering, coherent scattering, (ii) by the development of methods like diffraction anomalous fine structure (DAFS), pair distribution function (PDF), simulated annealing, single object reconstruction, (iii) by combination of scattering and spectroscopy and by combination of scattering and microscopy. Such combination of different approaches is very efficient and, as said by H. Curien at the IUCr Bordeaux Congress in 1990, “in crystallography, there is a constant alternation between the crystal space and its associated reciprocal space, ... the alternation between experiment and model building is another feature of crystallography activity ..., the crystallographer relies both on his computer and on his diffractometer

  15. [Dream interpretation: theory of the "psychological apparatus" as initial consciousness theory in Freud's metapsychology].

    Science.gov (United States)

    Weiss, H

    1983-01-01

    In the "Interpretation of Dreams" (1900 a) Freud presents for the first time a purely psychologically founded theory of psychic functioning, in the centre of which stands the model of the "psychic apparatus". In the detailed reconstruction of the statements of the "Interpretation" the present study tries to elaborate the meaning of "consciousness" within a psychology of the unconscious, in order to transfer--with reference to the early writings of J.-P. Sartre--the critique of Freudian unconscious to the level of the underlying conception of consciousness.

  16. A unique ball-shaped Golgi apparatus in the rat pituitary gonadotrope: its functional implications in relation to the arrangement of the microtubule network.

    Science.gov (United States)

    Watanabe, Tsuyoshi; Sakai, Yuko; Koga, Daisuke; Bochimoto, Hiroki; Hira, Yoshiki; Hosaka, Masahiro; Ushiki, Tatsuo

    2012-08-01

    In polarized exocrine cells, the Golgi apparatus is cup-shaped and its convex and concave surfaces are designated as cis and trans faces, functionally confronting the rough endoplasmic reticulum and the cell surface, respectively. To clarify the morphological characteristics of the Golgi apparatus in non-polarized endocrine cells, the investigators immunocytochemically examined its precise architecture in pituitary gonadotropes, especially in relation to the arrangement of the intracellular microtubule network. The Golgi apparatus in the gonadotropes was not cup-shaped but ball-shaped or spherical, and its outer and inner surfaces were the cis and trans faces, respectively. Centrioles were situated at the center of the Golgi apparatus, from which radiating microtubules isotropically extended to the cell periphery through the gaps in the spherical wall of the Golgi stack. The shape of the Golgi apparatus and the arrangement of microtubules demonstrated in the present study could explain the microtubule-dependent movements of tubulovesicular carriers and granules within the gonadotropes. Furthermore, the spherical shape of the Golgi apparatus possibly reflects the highly symmetrical arrangement of microtubule arrays, as well as the poor polarity in the cell surface of pituitary gonadotropes.

  17. High concentration of calcium ions in Golgi apparatus

    Institute of Scientific and Technical Information of China (English)

    XUESHAOBAI; M.ROBERTNICOUD; 等

    1994-01-01

    The interphase NIH3T3 cells were vitally fluorescentstained with calcium indicator fluo-3 and Glogi probe C6-NBD-ceramide,and then the single cells were examined by laser scanning confocal microscopy(LSCFM) for subcellular distributions of Ca2+ and the location of Golgi apparatus.In these cells,the intracellular Ca2+ were found to be highly concentrated in the Golgi apparatus.The changes of distribution of cytosolic high Ca2+ region and the Golgi apparatus coincided with the cell cycle phase.In calcium free medium,when the plasma membrane of the cells which had been loaded with fluo-3/AM were permeated by digitonin,the fluorescence of the Golgi region decreased far less than that of the cytosol.Our results indicated that the Glogi lumen retained significantly high concentration of free calcium.

  18. Recognition and tethering of transport vesicles at the Golgi apparatus.

    Science.gov (United States)

    Witkos, Tomasz M; Lowe, Martin

    2017-02-23

    The Golgi apparatus occupies a central position within the secretory pathway where it is a hub for vesicle trafficking. Distinct classes of transport vesicles traffic diverse cargoes into and out of this organelle, as well as between the different Golgi subcompartments. A key feature of Golgi trafficking is the specific recognition of transport vesicles at the different regions of the Golgi apparatus, required for the correct cargo delivery. Specificity is ensured by coiled-coil golgins and multi-subunit tethering complexes (MTCs), which act together to capture vesicles and promote their subsequent fusion with the Golgi membrane. In this review we discuss our current understanding of how golgins and MTCs function together to mediate the specific recognition of vesicles at the Golgi apparatus.

  19. Growth of the Mammalian Golgi Apparatus during Interphase.

    Science.gov (United States)

    Sin, Alex T-W; Harrison, Rene E

    2016-09-15

    During the cell cycle, genetic materials and organelles are duplicated to ensure that there is sufficient cellular content for daughter cells. While Golgi growth in interphase has been observed in lower eukaryotes, the elaborate ribbon structure of the mammalian Golgi apparatus has made it challenging to monitor. Here we demonstrate the growth of the mammalian Golgi apparatus in its protein content and volume during interphase. Through ultrastructural analyses, physical growth of the Golgi apparatus was revealed to occur by cisternal elongation of the individual Golgi stacks. By examining the timing and regulation of Golgi growth, we established that Golgi growth starts after passage through the cell growth checkpoint at late G1 phase and continues in a manner highly correlated with cell size growth. Finally, by identifying S6 kinase 1 as a major player in Golgi growth, we revealed the coordination between cell size and Golgi growth via activation of the protein synthesis machinery in early interphase.

  20. Crosstalk of small GTPases at the Golgi apparatus.

    Science.gov (United States)

    Baschieri, Francesco; Farhan, Hesso

    2012-01-01

    Small GTPases regulate a wide range of homeostatic processes such as cytoskeletal dynamics, organelle homeostasis, cell migration and vesicle trafficking, as well as in pathologic conditions such as carcinogenesis and metastatic spreading. Therefore, it is important to understand the regulation of small GTPase signaling, but this is complicated by the fact that crosstalk exists between different GTPase families and that we have to understand how they signal in time and space. The Golgi apparatus represents a hub for several signaling molecules and its importance in this field is constantly increasing. In this review we will discuss small GTPases signaling at the Golgi apparatus. Then, we will highlight recent work that contributed to a better understanding of crosstalk between different small GTPase families, with a special emphasis on their crosstalk at the Golgi apparatus. Finally, we will give a brief overview of available methods and tools to investigate spatio-temporal small GTPase crosstalk.