Measuring mandibular ridge reduction

International Nuclear Information System (INIS)

Steen, W.H.A.

1984-01-01

This thesis investigates the mandibular reduction in height of complete denture wearers and overdenture wearers. To follow this reduction in the anterior region as well as in the lateral sections of the mandible, an accurate and reproducible measuring method is a prerequisite. A radiologic technique offers the best chance. A survey is given of the literature concerning the resorption process after the extraction of teeth. An oblique cephalometric radiographic technique is introduced as a promising method to measure mandibular ridge reduction. The reproducibility and the accuracy of the technique are determined. The reproducibility in the positioning of the mandible is improved by the introduction of a mandibular support which permits a precise repositioning of the edentulous jaw, even after long periods of investigation. (Auth.)

Assessment of the anterior loop of the mandibular canal: A study using cone-beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Do Nascimento, Eduarda Helena Leandro [Dept. of Oral Diagnosis, Division of Oral Radiology, Piracicaba Dental School, University of Campinas (UNICAMP), Sao Paulo (Brazil); Ddos Anjos Pontual, Maria Luiza; Dos Anjos Pontual, Andra; Da Cruz Perez, Danyel Elias; De Moraes Ramos-Perez, Flavia Maria [Dept. of Clinical and Preventive Dentistry, School of Dentistry, Federal University of Pernambuco (UFPE), Pernambuco (Brazil); Figueiroa, Jose Natal [Instituto de Medicina Integral Professor Fernando Figueira - IMIP, Pernambuco (Brazil); Frazao, Marco Antonio Gomes [Dept. of Oral Radiology, Recife Dental School (FOR), Pernambuco (Brazil)

2016-06-15

Sufficient area in the interforaminal region is required for dental implant placement, and the anterior loop of the mandibular canal is located within the limits of this area. The aim of this study was to evaluate the prevalence and extent of the anterior loop in a Brazilian sample population using cone-beam computed tomography (CBCT). CBCT images from 250 patients (500 hemimandibles) obtained for various clinical indications were randomly selected and evaluated to determine the presence and length of the anterior loop. The length of the anterior loop was then compared based on gender, age, and the side of the mandible. The data were analyzed using the Pearson chi-square test and linear regression analysis. An anterior loop was identified in 41.6% of the cases, and its length ranged from 0.25 mm to 4.00 mm (mean, 1.1±0.8 mm). The loop had a greater mean length and was significantly more prevalent in males (p=0.014). No significant differences were found between the right and left sides regarding length (p=0.696) or prevalence (p=0.650). In this study, a high prevalence of the anterior loop of the mandibular canal was found, and although its length varied greatly, in most cases it was less than 1 mm long. Although this is a prevalent anatomical variation, safety limits for the placement of implants in this region cannot be established before an accurate evaluation using imaging techniques in order to identify and preserve the neurovascular bundles.

Efectos de los aparatos propulsores mandibulares fijos en la articulación temporomandibular

OpenAIRE

Palomino-Gómez, Sandra Patricia [UNESP; Almeida, Kélei Mathias [UNESP; Melllo, Patricia Bicalho de [UNESP; Restrepo, Manuel [UNESP; Raveli, Dirceu Barnabé [UNESP

2014-01-01

Fixed mandibular propulsion appliances are an alternative for the treatment of Class II malocclusion in individuals with mandibular deficiency. Since they are fixed appliances, said devices keep the mandible in an anterior-forced position during rest and during all mandibular functions. When a propulsive appliance is used, the lower jaw is displaced forward and downward. This movement leads to a new position of the condyle, which can, ultimately affect the normal functioning of the temporoman...

Relative position of the mandibular foramen in different age groups of children: A radiographic study

Directory of Open Access Journals (Sweden)

Poonacha K

2010-09-01

Full Text Available Objectives: To assess the relative position of the mandibular foramen (MF and to evaluate the measurement of gonial angle (GoA and its relationship with distances between different mandibular borders in growing children between 3 and 13years of dental age. Materials and methods: The radiographs were traced to arrive at six linear and two angular measurements from which the relative position of the MF was assessed and compared in different age groups to determine the growth pattern of the mandible and changes in the location of the MF. Results: The distances between the MF and the anterior plane of the ramus were greater than that between MF and posterior plane of the ramus through all stages. There was a maximum increase in the vertical dimensions of the mandible compared with the horizontal dimensions, particularly in the late mixed dentition period. Conclusion: The mandible and its growth did not alter the position of the MF, both vertically and horizontally, in relation to different landmarks, and more obtuse GoA indicated an increased growth potential of the mandible. This has major implications in the inferior alveolar nerve block technique when used in children.

Observation of positional relation between mandibular third molars and the mandibular canal on limited cone beam computed tomography

International Nuclear Information System (INIS)

Hashizume, Atsuko; Nakagawa, Yoichi; Ishii, Hisako; Kobayashi, Kaoru

2004-01-01

We describe the preoperative use of limited cone beam computed tomography (CT) with a dental CT scanner for the assessment of mandibular third molars before extraction. Cone beam CT provides 42.7-mm-high and 30-mm-wide rectangular solid images, with a resolution of less than 0.2 mm. The positional relationship between the mandibular third molars and the mandibular canal was examined by dental CT. Sixty-eight lower third molars of 62 patients whose teeth were superimposed on the mandibular canal on periapical or panoramic radiographs were studied. Dental CT scans clearly demonstrated the positional relationship between the mandibular canal and the teeth. The mandibular canal was located buccally to the roots of 16 teeth, lingually to the roots of 27 teeth, inferiorly to the roots of 23 teeth, and between the roots of 2 teeth. The presence of bone between the mandibular canal and the teeth was not noted in 7 of 16 buccal cases, 24 of 27 lingual cases, and 10 of 23 inferior cases on dental CT scans, suggesting that the canal was in contact with the teeth. Fifty-nine of the 68 mandibular third molars were surgically removed, and postoperative transient hypoesthesia occurred in 4 patients. Dental CT scans showed no bone between the mandibular canal and the teeth in all 4 patients. Hypoesthesia was not related to the bucco-lingual location of the mandibular canal or to the extent of bone loss between the canal and the teeth. However, hypoesthesia did not occur in patients with bone between the mandibular canal and the teeth. Thus, information on the distance between the canal and teeth on dental CT scans was useful for predicting the risk of inferior alveolar nerve damage. Because of its high resolution and low radiation dose, cone beam CT was useful for examination before mandibular third molar surgery. (author)

Glenoid fossa position in Class II malocclusion associated with mandibular retrusion.

Science.gov (United States)

Giuntini, Veronica; De Toffol, Laura; Franchi, Lorenzo; Baccetti, Tiziano

2008-09-01

To assess the position of the glenoid fossa in subjects with Class II malocclusion associated with mandibular retrusion and normal mandibular size in the mixed dentition. A sample of 30 subjects (16 male, 14 female), age 9 years +/- 6 months, with skeletal and dental Class II malocclusion associated with mandibular retrusion, normal skeletal vertical relationships, and normal mandibular dimensions, was compared with a matched group of 37 subjects (18 male, 19 female) with skeletal and dental Class I relationships. The comparisons between the Class II group and the control group on the cephalometric measures for the assessment of glenoid fossa position were performed by means of a nonparametric test for independent samples (Mann-Whitney U-test, P < .05). Subjects with Class II malocclusion presented with a significantly more distal position of the glenoid fossa, when compared with the control group as measured by means of three parameters (GF-S on FH, GF-Ptm on FH, and GF-FMN). A posteriorly displaced glenoid fossa is a possible diagnostic feature of Class II malocclusion associated with mandibular retrusion. An effective cephalometric measurement to evaluate glenoid fossa position is the distance from the glenoid fossa to the frontomaxillonasal suture (GF-FMN).

Rotational Distraction for the Treatment of Severe Mandibular Retrognathia.

Science.gov (United States)

Ito, Osamu; Mitsugi, Masaharu; Alcalde, Rafael E; Yano, Tomoyuki; Uemura, Noriko; Okazaki, Mutsumi

2015-07-01

The main problem with intraoral distraction of the mandible is the inability to achieve the three-dimensional mandibular correction as planned preoperatively. We developed a technique that allows spontaneous changes in the direction of mandibular elongation using an intraoral distractor. After mandibular osteotomy, the distractor is fixed to the distal segment of the mandible using a single bicortical screw, allowing anterior-posterior, vertical and limited lateromedial changes in the vector of distraction. Mandibular lengthening is performed while keeping the maxilla and mandible in class I occlusion with intermaxillary fixation. As the distraction device is activated allowing mandibular elongation, the proximal segment, guided by the surrounding soft tissues, moves and rotates posterosuperiorly. Mandibular lengthening is continued until the condylar head reaches an adequate position in the mandibular fossa as confirmed clinically and radiographically. Thirty-three patients with mandibular retrognathia received this treatment and good results were obtained.

Variant Anterior Digastric Muscle Transfer for Marginal Mandibular Branch of Facial Nerve Palsy

Directory of Open Access Journals (Sweden)

Matthew J. Zdilla, DC

2014-02-01

Full Text Available Summary: Marginal mandibular branch of facial nerve (MMBFN palsy is a common consequence of head and neck surgeries. MMBFN palsy results in paralysis of muscles which depress the inferior lip. Current management of MMBFN palsy involves ruination of normal neuromuscular anatomy and physiology to restore symmetry to the mouth. The article outlines the possibility to transfer variant anterior digastric musculature to accomplish reanimation of the mouth without adversely affecting normal nonvariant anatomy. The procedure may have the additional cosmetic benefit of correcting asymmetrical muscular bulk in the submental region.

Radiologic study of mandibular third molar of Korean youths

International Nuclear Information System (INIS)

Ahn, Hyung Kyu

1982-01-01

The author has made a study on the classification of the mandibular 3rd molars of Korean youths through dental radiography by means of Pell and Gregory's classification and on the prevalence of the dental caries of distal surface of the mandibular 2nd molar adjacent to the mandibular 3rd molars turned anteriorly. The results are as follow; 1. It was found that the largest case number was class I (272 cases, 52.9%) in the relation of the tooth to the ramus of the mandible and 2nd molar. 2. The mesio-angular position was the largest number (239 cases, 46.5%) in the relation of the long axis of the impacted mandibular 3rd molar to the long axis of the 2nd molar. 3. The mesio-angular position of class I was the largest number (140 cases, 27.2%) in the relation of the tooth to the ramus of the mandible and 2nd molar and the long axis of the impacted mandibular 3rd moral to the long axis of the 2nd molar. 4. The average angle of the long axis of mandibular 3rd molar in mesioangular position or horizontal position to the occlusal plane was 143 W 5. Mandibular 3rd molar with lesion such as dental cries or pericoronitis was 73 cases (14.2). 6. The caries incidence rate of the distal surface of the 2nd molar was about 3.1%.

A patient with mandibular deviation and 3 mandibular incisors treated with asymmetrically bent improved superelastic nickel-titanium alloy wires.

Science.gov (United States)

Ikeda, Yuhei; Kokai, Satoshi; Ono, Takashi

2018-01-01

Skeletal and dental discrepancies cause asymmetric malocclusions in orthodontic patients. It is difficult to achieve adequate functional occlusion and guidance in patients with congenital absence of a mandibular incisor due to the tooth-size discrepancy. Here, we describe the orthodontic treatment of a 22-year-old woman with an asymmetric Angle Class II malocclusion, mandibular deviation to the left, and 3 mandibular incisors. The anterior teeth and maxillary canines were crowded. We used an improved superelastic nickel-titanium alloy wire (Tomy International, Tokyo, Japan) to compensate for the asymmetric mandibular arch and an asymmetrically bent archwire to move the maxillary molars distally. A skeletal anchorage system provided traction for intermaxillary elastics, and extractions were not needed. We alleviated the crowding and created an ideal occlusion with proper overjet, overbite, and anterior guidance with Class I canine and molar relationships. This method of treatment with an asymmetrically bent nickel-titanium alloy wire provided proper Class I occlusion and anterior guidance despite the mandibular deviation to the left and 3 mandibular incisors, without the need for extractions. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Integrated three-dimensional digital assessment of accuracy of anterior tooth movement using clear aligners.

Science.gov (United States)

Zhang, Xiao-Juan; He, Li; Guo, Hong-Ming; Tian, Jie; Bai, Yu-Xing; Li, Song

2015-11-01

To assess the accuracy of anterior tooth movement using clear aligners in integrated three-dimensional digital models. Cone-beam computed tomography was performed before and after treatment with clear aligners in 32 patients. Plaster casts were laser-scanned for virtual setup and aligner fabrication. Differences in predicted and achieved root and crown positions of anterior teeth were compared on superimposed maxillofacial digital images and virtual models and analyzed by Student's t-test. The mean discrepancies in maxillary and mandibular crown positions were 0.376 ± 0.041 mm and 0.398 ± 0.037 mm, respectively. Maxillary and mandibular root positions differed by 2.062 ± 0.128 mm and 1.941 ± 0.154 mm, respectively. Crowns but not roots of anterior teeth can be moved to designated positions using clear aligners, because these appliances cause tooth movement by tilting motion.

Neurovascular Content of the Mandibular Canal and Its Clinical Relevance: A Literature Review of the Related Anatomical and Radiological Studies

Directory of Open Access Journals (Sweden)

Eliades Apostolos N.

2014-11-01

Full Text Available In literature, anatomical variations of the inferior alveolar nerve branches (infratemporal, extraosseous and intraosseous are reported and their importance in clinical practice is discussed too. The spatial vessels’ position in relationship with the nerve in the mandibular canal was explored, which is of clinical significance in impacted third molar and implant surgery. It is believed that the neurovascular content of the main mandibular canal follows any variations of the mandibular canal i.e. bifid mandibular, retromolar and accessory mental canals. Retrospective studies and case reports reported the presence of multiple foramina on the medial surface of the ramus, near the main mandibular foramen. In some cases, one supplementary mandibular foramen was found to be connected with the lower third molar, which is called “temporal crest canal”. Others found an accessory mandibular foramen that led into a second mandibular canal which joined the main mandibular canal (double anteriorly. The bony canals contained a terminal branch of the anterior trunk of the mandibular nerve or a branch of inferior alveolar nerve before it entered the mandibular foramen.

Anterior mandibular displacement and condylar growth. An experimental study in the rat

International Nuclear Information System (INIS)

Tonge, E.A.; Heath, J.K.; Meikle, M.C.

1982-01-01

Anterior displacement of the mandible was produced in twenty-eight 1-month-old female rats by two methods: (1) cast-gold splints cemented to the maxillary incisor teeth and (2) a removable stainless steel mesh appliance worn 6 hours each day, during which time the animals were sedated. The controls were littermates without appliances and in the mesh group were also sedated. Animals in the splint group were killed after 24 hours, 1 week, and 1 month; those in the mesh group were killed after 24 hours and after 1 week. the condyles were removed and cultured for 24 hours in medium containing 3 H-thymidine. One condyle from each animal was processed for routine histologic and autoradiographic study. The other was digested in phosphate-buffered saline containing RNA-ase and pronase, and the specific activity of 3 H-thymidine incorporation expressed as dpm/microgramDNA. Anterior mandibular displacement produced by both methods failed to result in a significant increase in the incorporation of 3 H-thymidine into explant DNA. In the 7-day mesh experiment, however, there was a significant increase in the DNA content of the condylar explants from the displacement group, suggesting an increase in the cell population. This finding should be treated with caution because of the small numbers of animals involved, but it indicates an important area for further study. Changes in the distribution of labeled cells within the proliferative zone (PZ) were also observed autoradiographically in the mesh group, but there was little to suggest that mandibular displacement was accompanied by a significant increase in cell division within the PZ. Remodeling changes affecting both the articular tissue and the subchondral bone were a characteristic feature of the 1-month bit plane group

[Anterior guidance in complete dentures].

Science.gov (United States)

Dubreuil, J; Trevelo, A

1990-01-01

Although the anterior guidance in complete dentures is not really a guide, the arrangement of the anterior maxillary and mandibular prosthetic teeth, defines a propulsive line called the virtual anterior guidance, a part from the cinematic criterias. The influence of this guide on cuspal movement is superior, in all mandibular points, to the influence of the condylar pathway. If this line is not respected, the practitioner may have to do excessive grindings during occlusal adjustments.

Biomechanical considerations in mandibular incisor extraction cases.

Science.gov (United States)

Rachala, Madhukar Reddy; Aileni, Kaladhar Reddy; Dasari, Arun Kumar; Sinojiya, Jay

2015-01-01

Mandibular incisor extraction can be regarded as a valuable treatment option in certain malocclusions to obtain excellence in orthodontic results in terms of function, aesthetics and stability. This treatment alternative is indicated in clinical situations like mild to moderate class III malocclusion, mild anterior mandibular tooth size excess, periodontally compromised teeth, ectopic eruption of mandibular incisor and minimal openbite tendencies. Unlike in premolar extraction cases, space closure in mandibular incisor extraction cases is unique in which the extraction space will be in the middle of the arch. The end result of space closure in these cases should be well aligned, upright, anterior teeth with parallel roots and the goal can be achieved with the bodily tooth movement through proper application of biomechanics. The purpose of this article is to explain the biomechanics of space closure in mandibular incisor extraction cases.

Computerized tomography of the mandibular joints and masticatory muscles

International Nuclear Information System (INIS)

Huels, A.B.

1981-01-01

A methodology for computerized tomography of the mandibular joints was developed and applied in 80 test persons. Imaging of the mandibular joints is possible with a tomographic technique with 5 mm-overlap, full utilisation of the enlargement capacity of the imaging device, and combined use of transversal and coronary tomography. The method yields full latero-medial, cranio-caudal and anterior-posterior views of the condyle and fossa contours, free of interferences and of distortions caused by the projection. Positional diagnoses are thus possible as well as diagnoses of pathological structural changes. (orig./MG) [de

[Longitudinal genetic effects on mandibular position of female twins from six to twelve years old].

Science.gov (United States)

Zhu, Chang-feng; Peng, Jing

2013-06-01

To find the longitudinal genetic effects on mandibular position in mixed dentition. The sample used in this study consisted of lateral cephalograms of eighty-nine pairs of female twins in Beijing. With a mixed longitudinal method, the effective twins were 183 pairs(monozygous 110 pairs and dizygous 73 ones). The genetic and environmental effects on mandibular position were analyzed by statistical methods in female twins from six to twelve years old. Statistical comparisons revealed significant (Pchin is the most subjective to environment change, then the mandibular angle, and the condyle is the least. Using N and S as references, the environmental influence on heights showed different order from the most to least changeable: The mandibular angle, the condyle and the chin. In later stage of our observation, the mandibular morphology and growth type might be family inherited. For environmental influences plays important roles on mandibular position, these findings can be used in orthodontic treatment planning.

Relationship of maxillary 3-dimensional posterior occlusal plane to mandibular spatial position and morphology.

Science.gov (United States)

Coro, Jorge C; Velasquez, Roberto L; Coro, Ivette M; Wheeler, Timothy T; McGorray, Susan P; Sato, Sadao

2016-07-01

The purpose of this study was to examine the relationship of the 3-dimensional (3D) posterior occlusal plane (POP) and the mandibular 3D spatial position. The relationship of the POP to mandibular morphology was also investigated. Retrospective data from a convenience sample of pretreatment diagnostic cone-beam computed tomography scans were rendered using InVivo software (Anatomage, San Jose, Calif). The sample consisted of 111 subjects (51 male, 60 female) and included growing and nongrowing subjects of different races and ethnicities. The 3D maxillary POP was defined by selecting the cusp tips of the second premolars and the second molars on the rendered images of the subjects. The angles made by this plane, in reference to the Frankfort horizontal plane, were measured against variables that described the mandibular position in the coronal, sagittal, and axial views. The POP was also compared with bilateral variables that described mandibular morphology. There were significant differences of the POP among the different skeletal malocclusions (P <0.0001). The POP showed significant correlations with mandibular position in the sagittal (P <0.0001), coronal (P <0.05), and axial (P <0.05) planes. The POP also showed a significant correlation with mandibular morphology (P <0.0001). These findings suggest that there is a distinct and significant relationship between the 3D POP and the mandibular spatial position and its morphology. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Resolution of neurosensory deficit after mandibular orthognathic surgery: A prospective longitudinal study.

Science.gov (United States)

Alolayan, Albraa Badr; Leung, Yiu Yan

2017-05-01

To investigate the longitudinal resolution of neurosensory deficit (NSD) and the possible risk factors that might contribute to NSD following mandibular orthognathic procedures. A prospective longitudinal observational study on patients who had mandibular orthognathic procedures was performed. Standardized neurosensory assessments were performed. The 2 years longitudinal resolution and risk factors of NSD including patients' age and gender, specific mandibular procedures and surgeons' experience were analyzed. 66 patients (44 females) with 132 sides of mandibular procedures were enrolled in the study. Surgical procedures included mandibular ramus surgery, anterior mandibular surgery, or the combination of the two. The overall occurrences of subjective NSD improved from 78.8% at postoperative 2 weeks to 13.8% at post-operative 2 years. Combinations of ramus surgery and anterior mandibular surgery increased the risk of NSD at the first three post-operative months (p orthognathic surgery. The occurrence of NSD after mandibular orthognathic procedures reduced progressively within the post-operative 2 years. Combination of mandibular ramus surgery and anterior mandibular surgery increased the risk of NSD in the early post-operative period. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Anterior mandibular apical base augmentation in the surgical orthodontic treatment of mandibular retrusion.

Science.gov (United States)

Brusati, R; Giannì, A B

2005-12-01

The authors describe a surgical technique alternative to traditional pre-surgical orthodontics in order to increase the apical base in mandibular retrusion (class II, division I). This subapical osteotomy, optimizing inferior incisal axis without dental extractions and a long orthodontic treatment, associated to genioplasty permits to obtain an ideal labio-dento-mental morphology. This procedure avoids in some cases the need of a mandibular advancement and, if necessary, it reduces his entity with obvious advantages.

Use of personal computers for Gothic arch tracing: analysis and evaluation of horizontal mandibular positions with edentulous prosthesis.

Science.gov (United States)

Watanabe, Y

1999-11-01

Determining mandibular position for an edentulous patient raises the question of whether to emphasize centric relation or muscular position. This challenge results from the lack of a convenient procedure for quantifying the horizontal mandibular position, which can be determined by a variety of methods. This study analyzed and evaluated the horizontal mandibular positions produced by different guidance systems. Twenty-six edentulous subjects with no clinical evidence of abnormality of temporomandibular disorder were selected. Horizontal position data for the mandible obtained by gothic arch tracing was loaded into a personal computer by setting the sensor portion of a digitizer into the oral cavity to serve as a miniature lightweight tracing board. By connecting this with a digitizer control circuit set in an extraoral location, each mandibular position was displayed in a distinguishable manner on a computer display in real time, then recorded and analyzed. The gothic arch apex and tapping point varied, depending on body position. In the supine position, the gothic arch apex and the tapping point were close to the mandibular position determined by bilateral manipulation. This system provides effective data concerning mandibular positions for fabrication of dentures.

Effect of mandibular plane angle on image dimensions in linear tomography

Directory of Open Access Journals (Sweden)

Bashizadeh Fakhar H

2011-02-01

Full Text Available "nBackground and Aims: Accurate bone measurements are essential for determining the optimal size and length of proposed implants. The radiologist should be aware of the head position effects on image dimensions in each imaging technique. The purpose of this study was to evaluate the effect of mandibular plane angle on image dimensions in linear tomography."nMaterials and Methods: In this in vitro study, the vertical dimensions of linear tomograms taken from 3 dry mandibles in different posteroantenior or mediolateral tilts were compared with actual condition. In order to evaluate the effects of head position in linear tomography, 16 series of images while mandibular plane angle was tilted with 5, 10, 15 and 20 degrees in anterior, posterior, medial, or lateral angulations as well as a series of standard images without any tilt in mandibular position were taken. Vertical distances between the alveolar crest and the superior border of the inferior alveolar canal were measured in posterior mandible and the vertical distances between the alveolar crest and inferior rim were measured in anterior mandible in 12 sites of tomograms. Each bone was then sectioned through the places marked with a radiopaque object. The radiographic values were compared with the real conditions. Repeat measure ANOVA was used to analyze the data."nResults: The findings of this study showed that there was significant statistical difference between standard position and 15º posteroanterior tilt (P<0.001. Also there was significant statistical difference between standard position and 10º lateral tilt (P<0.008, 15º tilt (P<0.001, and 20º upward tilt (P<0.001. In standard mandibular position with no tilt, the mean exact error was the same in all regions (0.22±0.19 mm except the premolar region which the mean exact error was calculated as 0.44±0.19 mm. The most mean exact error among various postroanterior tilts was seen in 20º lower tilt in the canine region (1±0.88 mm

Association of the Mandibular Third Molar Position to the Pericoronitis

Directory of Open Access Journals (Sweden)

Tsvetan Tsvetanov

2018-02-01

Full Text Available Introduction: Pericoronitis is inflammation of the soft tissues surrounding the crown of a partially erupted tooth. Objective: To provide measurement of lower third molar angulation and determine relationship between mandibular third molar position and presence of pericoronitis. Material and methods: We studied 104 patients with lower third molar pericoronitis with clinical manifestations and measurement of lower third molar angulation. The mean age of patients was 25.7 years (range 18-35 years. Results: In this study was used the following statistical analysis, Pearson correlation coefficient and Spearman’s correlation coefficient (nonparametric version of the Pearson correlation coefficient for measure of the linear correlation between two variables - pericoronitis and angulation of the lower third molars. The chi-square test was used to assesses case incidences. The level of significance was p<0.05. 36.04% of partially impacted mandibular third molars were mesioangular followed by the vertical (25.47%, horizontal (18.97%, distoangular (9.21%, buccal (5.42% and lingual (3.79% position. The lowest part of the mandibular third molars is located in the ramus of mandible (1.08%. The present study was found in relation to mesioangular, distoangular, vertical impaction and pericoronitis (p<0.05. Conclusion: We conclude that the position of lower third molar may be able to be associated with presence of pericoronitis.

MORPHOMETRIC ANALYSIS OF MANDIBULAR FORAMEN AND INCIDENCE OF ACCESSORY MANDIBULAR FORAMINA IN ADULT HUMAN MANDIBLES OF AN INDIAN POPULATION. Análisis morfométrico del foramen mandibular e incidencia de la foramina mandibular accesoria en mandíbulas adult

Directory of Open Access Journals (Sweden)

Prajna Paramita Samanta

2016-03-01

Full Text Available El foramen mandibular es un importante hito anatómico. Para procedimientos como el bloqueo alveolar inferior del nervio, el tratamiento con implantes y osteotomías mandibulares, un profundo conocimiento de la ubicación del foramen mandibular (MF y el foramen mandibular accesorio (AMF es un requisito previo. Hay pocas referencias en la literatura con respecto a la localización anatómica exacta del foramen mandibular. Por lo tanto, el presente estudio tuvo como objetivo identificar la ubicación exacta de la MF y la incidencia de la AMF alrededor MF en una población india. Sesenta (60 mandíbulas humanas adultas fueron estudiadas para determinar la distancia del LV de la los anteriores, bordes posteriores de la rama mandibular, maxilar inferior categoría y el ángulo de la mandíbula. AMF todo el MF también fueron estudiados por su presencia y números. La distancia media de MF del borde anterior de rama mandibular fue 15,72 ±2,92 mm(lado derecho, 16,23 ±2,88 mm(lado izquierdo, de borde posterior fue 13,29 ±1,74 mm(lado derecho y 12,73 ±2,04 mm(a la izquierda lado. La MF se encuentra 22,70 ±3 mm(lado derecho y 22, 27 ± 2,62 mm(lado izquierdo de la muesca mandibular. La distancia de MF de ángulo de la mandíbula fue 21,54 ±2,92 mm(lado derecho y 21,13 ±3.43 mm(lado izquierdo. AMF estuvieron presentes en el 16, 66% de las mandíbulas. En 10% de las mandíbulas una sola AMF estaba presente y en el 6,66% hubo dos agujeros presentes. La ubicación del MF y AMF es importante para evitar compli-caciones como hemorragia y parestesia durante los procedimientos quirúrgicos orales y también para los radioterapeutas en la planificación de la radioterapia.  The mandibular foramen is an important anatomical land mark. For procedures like inferior alveolar nerve block, implant treatment and mandibular osteotomies, a thorough knowledge of the location of the mandibular foramen (MF and accessory mandibular foramina (AMFs is a prerequisite

Using individual two-posterior short implants with two-anterior standard implants in mandibular implant-supported-overdenture to enhance the patient satisfaction: A clinical report

Directory of Open Access Journals (Sweden)

Mehran Bahrami

2017-01-01

Full Text Available Introduction: Many clinical cases and the literature review have revealed implant-supported-overdentures’ (ISOs treatment success and predictability in elderly patients. According to the previous studies, all the mandibular ISOs used 2–4 implants anterior to mental foramen to retain the denture. Case Report: In this clinical report, two individual anterior standard implants and two individual posterior short implants were used to support the mandibular ISO, as well as to prevent further posterior bone resorption. This treatment option permits the patient to insert more implants in the future, and could be upgraded to implant-supported-fixed prosthesis. Discussion: The patient was completely satisfied about the final result, especially for upgrading the mastication efficiency. The patient was followed-up for more than 2 years without complication. The panoramic X-ray showed the preserved bone in the posterior region. This technique could be considered to be innovative, and more clinical cases are required to be documented as a predictable modality.

An evaluation of the gingival biotype and the width of keratinized gingiva in the mandibular anterior region of individuals with different dental malocclusion groups and levels of crowding.

Science.gov (United States)

Kaya, Yeşim; Alkan, Özer; Keskin, Sıddık

2017-05-01

To evaluate the relationship of gingival thickness (GT) and the width of keratinized gingiva (WKG) with different malocclusion groups and the level of crowding. A total of 187 periodontally healthy subjects (121 females and 66 males) who presented at the Faculty of Dentistry in Yüzüncü Yıl University for orthodontic treatment were enrolled in the study. The individuals involved in the study were divided into three groups; Angle Class I malocclusion, Angle Class II malocclusion, and Angle Class III malocclusion. Each group was classified as mild, moderate, or severe according to the level of crowding. WKG was determined as the distance between the mucogingival junction and the free gingival margin. GT was determined by the transgingival probing technique. Factorial variance analysis and the Duncan multiple comparison test were employed to identify the extent to which a difference was apparent between the groups according to these parameters. It was determined that teeth in the mandibular anterior region display the thin gingival biotype. WKG and GT were observed as being higher at the mandibular incisor teeth in the severe crowding group and at the mandibular canine teeth in the mild crowding group. The GT of the mandibular right central and lateral incisors was found to be thinner in the Angle Class III group. Within the limits of this study, the results demonstrate that, there is no significant relationship of WKG and the mean GT in the mandibular anterior region according to the Angle classification.

Evaluation of the Root and Canal Morphology of Mandibular Permanent Anterior Teeth in an Iranian Population by Cone-Beam Computed Tomography

Directory of Open Access Journals (Sweden)

Mohsen Aminsobhani

2013-01-01

Full Text Available Objective: To evaluate differences in the root and canal configurations of mandibular permanent anterior incisors and canines in an Iranian population by means of Cone Beam CT (CBCT images.Materials and Methods: Four hundred CBCT images of mandibular permanent incisors and canines that met the inclusion criteria were evaluated. Vertucci´s classification was used to evaluate the number of roots, number of root canals, root lengths, root curvatures and canal types.Results: Totally 632 central incisors, 614 lateral incisors and 608 canines were evaluated. The average length of the mandibular central, lateral incisors and canines was 21.3±0.10, 21.9± 0.13 and 25.1± 0.11 mm, respectively. All of the mandibular central and lateral incisors had one root, but the incidence of single-rooted mandibular canines and two-rooted mandibular canines was 96.3% and 4.7%, respectively. The majority of mandibular central, lateral incisors and canines had one canal (72.7%, 70.6% and 71.8%, respectively. Five types of Vertucci canal configurations were seen in the evaluated teeth. Type 1 Vertucci configuration was the most prevalent configuration (72.3%, 70.6% and 71.8% for the central, lateral incisors and canines, respectively, and type 5 Vertucci canal configuration was the least prevalent type seen (3.3%, 3.2% and 2.3% for the central, lateral incisors and canines, respectively. The most frequent root curvatures in these teeth were distally and buccally. No significant difference was seen between male and female patients regarding any of the parameters evaluated in this study (p>0.05.Conclusion: More attention should be given to the detection of additional canals and the recognition of canal curvature in Iranian patients.

Radiographic cephalometry analysis of condylar position after bimaxillary osteotomy in patients with mandibular prognathism

Directory of Open Access Journals (Sweden)

Miković Nikola D.

2016-01-01

Full Text Available Background/Aim. Postoperative condylar position is a substantial concern in surgical correction of mandibular prognathism. Orthognathic surgery may change condylar position and this is considered a contributing factor for early skeletal relapse and the induction of temporomandibular disorders. The purpose of this study was to evaluate changes in condylar position, and to correlate angular skeletal measurements following bimaxillary surgery. Methods. On profile teleradiographs of 21 patients with mandibular angular and linear parametres, the changes in condylar position, were measured during preoperative orthodontic treatment and 6 months after the surgical treatment. Results. A statistically significant difference in values between the groups was found. The most distal point on the head of condyle point (DI moved backward for 1.38 mm (p = 0.02, and the point of center of collum mandibulae point (DC moved backward for 1.52 mm (p = 0.007. The amount of upward movement of the point DI was 1.62 mm (p = 0.04. Conclusion. In the patients with mandibular prognathism, the condyles tend to migrate upward and forward six months after bimaxillary surgery.

X-cephalometric study of different parts of the upper airway space and changes in hyoid position following mandibular fractures.

Science.gov (United States)

Chen, L-J; Zhao, M-C; Pan, X-F; Wei, Y-Q; Wang, D-Y

2013-09-01

This study analyses the different parts of the upper airway space and the changes in hyoid position. The results provide a clinical reference for developing timely and effective treatment programmes for patients with mandibular fractures caused by maxillofacial trauma. Standard X-cephalometric measurements of the lateral skull of 210 subjects were taken. The subjects were divided into four fracture groups: condylar, mandibular angle, mandibular body, and parasymphyseal. The radiographs of the mandibular fracture groups were compared with the normal occlusion group to analyse the upper airway space and the changes in hyoid position. Different types of fractures have different effects on the upper airway space. Bilateral mandibular body fracture and the parasymphyseal fracture have a significant influence on the lower oropharyngeal and laryngopharyngeal airway spaces, with serious obstructions severely restricting the ventilatory function of patients. Fractures at different parts of the mandibular structure are closely related to the upper airway and hyoid position.

Anterior open-bite orthodontic treatment in an adult patient: A clinical case report.

Science.gov (United States)

Gracco, Antonio; Siviero, Laura; de Stefani, Alberto; Bruno, Giovanni; Stellini, Edoardo

2016-06-01

A 45-year-old woman presented with an anterior open-bite complaining chiefly of her unpleasant smile esthetics and masticatory and speech problems. Treatment included speech therapy initiated immediately after bonding. Lingual spurs were positioned on the mandibular incisors in order to help tongue rehabilitation. During the working phase, temporary anchorage devices (TADs) were used at the mandibular anterior segment to intrude the lower left premolars. A splint was used to ensure retention in the upper and lower arches; an enveloppe linguale nocturne (ELN) was provided. Non-surgical open-bite treatment could offer a valid alternative to orthognanthic surgery when cephalometric evaluation shows no vertical growth pattern; patient compliance is essential to prevent relapse. Copyright © 2016 CEO. Published by Elsevier Masson SAS. All rights reserved.

Self-reinforced bioresorbable poly-L/DL-lactide [SR-P(L/DL)LA] 70/30 miniplates and miniscrews are reliable for fixation of anterior mandibular fractures: a pilot study.

Science.gov (United States)

Ylikontiola, Leena; Sundqvuist, Kai; Sàndor, George K B; Törmälä, Pertti; Ashammakhi, Nureddin

2004-03-01

Bioresorbable osteofixation devices are being increasingly used in orthognathic surgery and in cases of trauma to avoid problems associated with conventional metal osteofixation devices. The aim of this clinical study was to assess the reliability and efficacy of bioresorbable self-reinforced poly-L/DL-lactide (SR-P(L/DL)LA 70/30) plates and screws in the fixation of mandibular fractures in adults. Ten patients (20 to 49 years old) with isolated anterior mandibular parasymphyseal fractures were treated by means of open reduction and internal fixation using SR-P(L/DL)LA 70/30 bioresorbable plates and screws. During the minimum of 6 months of follow-up, no problems were encountered except for 1 case where a plate became exposed intraorally and infected. This required debridement and later excision of the exposed part of the plate. Despite this setback the fractured bone healed well. SR-P(L/DL)LA 70/30 plates and screws are reliable for internal fixation of anterior mandibular fractures in adults. Proper soft tissue coverage should be ensured to avoid plate exposure. Should implant exposure occur, it might be necessary to excise the exposed part after fracture healing (6-8 weeks postoperatively).

Significance of localization of mandibular foramen in an inferior alveolar nerve block.

Science.gov (United States)

Thangavelu, K; Kannan, R; Kumar, N Senthil; Rethish, E; Sabitha, S; Sayeeganesh, N

2012-07-01

The mandibular foramen (MF) is an opening on the internal surface of the ramus for divisions of the mandibular vessels and nerve to pass. The aim of this study is to determine the position of the MF from various anatomical landmarks in several dry adult mandibles. A total of 102 human dry mandibles were examined, of which 93 were of dentulous and 9 were of edentulous. The measurements were taken from the anterior border of the ramus (coronoid notch) to the midportion of the MF and then from the midportion of the MF to the other landmarks such as internal oblique ridge, inferior border, sigmoid notch, and condyle were measured and recorded. The data were compared using Student's t-test. The MF is positioned at a mean distance of 19 mm (with SD 2.34) from coronoid notch of the anterior border of the ramus. Superio-inferiorly from the condyle to the inferior border MF is situated 5 mm inferior to the midpoint of condyle to the inferior border distance (ramus height). We conclude that failures in the anesthesia of the inferior alveolar nerve are due to the operator error and not due to the anatomical variation.

Studies on reproducible, three-dimensional radiography of the mandibular joint on the basis of the summation technique

International Nuclear Information System (INIS)

Lang, T.

1981-01-01

A positioning device is described and tested. In addition to individual, reproducible radiography of the mandibular joint, taken obliquely, also submento-vertical and posterior-anterior imaging of the skull, i.e. determination of the axial angle of the condyles is possible with this device. (orig./MG) [de

Validity of a manual soft tissue profile prediction method following mandibular setback osteotomy.

Science.gov (United States)

Kolokitha, Olga-Elpis

2007-10-01

The aim of this study was to determine the validity of a manual cephalometric method used for predicting the post-operative soft tissue profiles of patients who underwent mandibular setback surgery and compare it to a computerized cephalometric prediction method (Dentofacial Planner). Lateral cephalograms of 18 adults with mandibular prognathism taken at the end of pre-surgical orthodontics and approximately one year after surgery were used. To test the validity of the manual method the prediction tracings were compared to the actual post-operative tracings. The Dentofacial Planner software was used to develop the computerized post-surgical prediction tracings. Both manual and computerized prediction printouts were analyzed by using the cephalometric system PORDIOS. Statistical analysis was performed by means of t-test. Comparison between manual prediction tracings and the actual post-operative profile showed that the manual method results in more convex soft tissue profiles; the upper lip was found in a more prominent position, upper lip thickness was increased and, the mandible and lower lip were found in a less posterior position than that of the actual profiles. Comparison between computerized and manual prediction methods showed that in the manual method upper lip thickness was increased, the upper lip was found in a more anterior position and the lower anterior facial height was increased as compared to the computerized prediction method. Cephalometric simulation of post-operative soft tissue profile following orthodontic-surgical management of mandibular prognathism imposes certain limitations related to the methods implied. However, both manual and computerized prediction methods remain a useful tool for patient communication.

Cephalometric evaluation of adult anterior open bite non-extraction treatment with Invisalign.

Science.gov (United States)

Moshiri, Shuka; Araújo, Eustáquio A; McCray, Julie F; Thiesen, Guilherme; Kim, Ki Beom

2017-01-01

The purpose of this study was to evaluate, by means of cephalometric appraisal, the vertical effects of non-extraction treatment of adult anterior open bite with clear aligners (Invisalign system, Align Technology, Santa Clara, CA, USA). Lateral cephalograms of 30 adult patients with anterior open bite treated using Invisalign (22 females, 8 males; mean age at start of treatment: 28 years and 10 months; mean anterior open bite at start of treatment: 1.8 mm) were analyzed. Pre- and post-treatment cephalograms were traced to compare the following vertical measurements: SN to maxillary occlusal plane (SN-MxOP), SN to mandibular occlusal plane (SN-MnOP), mandibular plane to mandibular occlusal plane (MP-MnOP), SN to mandibular plane (SN-MP), SN to palatal plane (SN-PP), SN to gonion-gnathion plane (SN-GoGn), upper 1 tip to palatal plane (U1-PP), lower 1 tip to mandibular plane (L1-MP), mesiobuccal cusp of upper 6 to palatal plane (U6-PP), mesiobuccal cusp of lower 6 to mandibular plane (L6-MP), lower anterior facial height (LAFH), and overbite (OB). Paired t-tests and descriptive statistics were utilized to analyze the data and assess any significant changes resulting from treatment. Statistically significant differences were found in overall treatment changes for SN-MxOP, SN-MnOP, MP-MnOP, SN-MP, SN-GoGn, L1-MP, L6-MP, LAFH, and OB. The Invisalign system is a viable therapeutic modality for non-extraction treatment of adult anterior mild open bites. Bite closure was mainly achieved by a combination of counterclockwise rotation of the mandibular plane, lower molar intrusion and lower incisor extrusion.

Mandibular position influence on pilots' postural balance analyzed under dynamic conditions.

Science.gov (United States)

Baldini, Alberto; Nota, Alessandro; Cioffi, Clementina; Ballanti, Fabiana; Tecco, Simona

2017-11-01

The aim of this study is to evaluate the influence of the mandibular position on the postural stability in a sample of civilian and military pilots. Twenty military pilots (males, mean age 35.15 ± 3.14 years) and 17 civilian pilots (males, mean 34.91 ± 2.15 years) were enrolled in this study and underwent a Sensory Organization Test (SOT) using the EquiTest® (NeuroCom International Inc., Clackamas, OR, USA) computerized dynamic posturography. The composite parameter was recorded and analyzed. The equilibrium score (ES) recorded in centric occlusion is slightly higher than the ES recorded in mandibular rest position; civilian pilots showed ESs slightly higher than military pilots. The two-way ANOVA analysis shows these differences are not statistically significant. The findings of this study seem to suggest that the composite parameter of the SOT is not sensitive in analyzing the influence of the stomatognathic system on the postural balance of civilian and military pilots.

Maxillary advancement for mandibular prognathism: indications and rationale.

Science.gov (United States)

Rosen, H M

1991-05-01

The surgical correction of mandibular prognathism has traditionally involved posterior repositioning of the mandibular body. This treatment approach corrects the skeletal disproportion at the expense of reducing facial skeletal volume and can unpredictably result in inadequately supported soft tissues with loss of skeletal definition. In an effort to avoid these sequelae of mandibular reduction, 18 patients diagnosed as having mandibular prognathism were treated with maxillary advancement surgery at the Le Fort I level. Mean patient SNB angle was 85.2 degrees, as compared with a normal 79 +/- 3 degrees. Maxillae were documented to be in normal position relative to both cranial base and Frankfort horizontal. The mean maxillary advancement was 6.9 mm, with a range of 4.5 to 8.8 mm. All patients required genioplasty to reduce vertical chin height and/or to laterally shift the chin. At the time of follow-up (mean 16.2 months), all patients retained cephalometric data suggestive of enlarged mandibles and excessive anterior facial divergence. However, maxillomandibular harmony and facial convexity had been restored without sacrificing skeletal volume. Treatment results demonstrated these faces to be skeletally well proportioned despite lower face protrusion that was beyond "normal." Postoperative appearances were characterized by a well-supported soft-tissue envelope and a highlighted skeletal foundation, creating angular, well-defined lower faces. These findings support the credibility of maxillary advancement as the procedure of choice in selected individuals with mandibular prognathism. Indications and an aesthetic rationale for this surgical approach are presented.

Bone changes of mandibular condyle using cone beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Un; Kim, Hyung Seop; Song, Ju Seop; Kim, Kyoung A; Koh, Kwang Joon [Chonbuk National Univ., Chonju (Korea, Republic of)

2007-09-15

To assess bone changes of mandibular condyle using cone beam computed tomography (CBCT) in temporomandibualr disorder (TMD) patients. 314 temporomandibular joints (TMJs) images of 163 TMD patients were examined at the Department of Oral and Maxillofacial Radiology, Chonbuk National University. The images were obtained by PSR9000N (Asahi Roentgen Co., Japan) and reconstructed by using Asahivision software (Asahi Roentgen Co., Japan). The CBCT images were examined three times with four weeks interval by three radiologists. Bone changes of mandibular condyle such as flattening, sclerosis, erosion and osteophyte formation were observed in sagittal, axial, coronal and 3 dimensional images of the mandibular condyle. The statistical analysis was performed using SPSS 12.0. Intra-and interobserver agreement were performed by 3 radiologists without the knowledge of clinical information. Osteopathy (2.9%) was found more frequently on anterior surface of the mandibular condyle. Erosion (31.8%) was found more frequently on anterior surface of the mandibular condyle. The intraobserver agreement was good to excellent (k=0.78{sub 0}.84), but interobserver agreement was fair (k=0.45). CBCT can provide high qualified images of bone changes of the TMJ with axial, coronal and 3 dimensional images.

Bone changes of mandibular condyle using cone beam computed tomography

International Nuclear Information System (INIS)

Lee, Ji Un; Kim, Hyung Seop; Song, Ju Seop; Kim, Kyoung A; Koh, Kwang Joon

2007-01-01

To assess bone changes of mandibular condyle using cone beam computed tomography (CBCT) in temporomandibualr disorder (TMD) patients. 314 temporomandibular joints (TMJs) images of 163 TMD patients were examined at the Department of Oral and Maxillofacial Radiology, Chonbuk National University. The images were obtained by PSR9000N (Asahi Roentgen Co., Japan) and reconstructed by using Asahivision software (Asahi Roentgen Co., Japan). The CBCT images were examined three times with four weeks interval by three radiologists. Bone changes of mandibular condyle such as flattening, sclerosis, erosion and osteophyte formation were observed in sagittal, axial, coronal and 3 dimensional images of the mandibular condyle. The statistical analysis was performed using SPSS 12.0. Intra-and interobserver agreement were performed by 3 radiologists without the knowledge of clinical information. Osteopathy (2.9%) was found more frequently on anterior surface of the mandibular condyle. Erosion (31.8%) was found more frequently on anterior surface of the mandibular condyle. The intraobserver agreement was good to excellent (k=0.78 0 .84), but interobserver agreement was fair (k=0.45). CBCT can provide high qualified images of bone changes of the TMJ with axial, coronal and 3 dimensional images

Radiologic study of mandibular foramen of mandibular prognathism by three-dimensional computed tomography

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung Hun; Moon, Cheol Hyun; Im, Jeong Soo; Seo, Hwa Jeong [Graduate School of Public Health and Social Welfare, Gachon University of Medicine and Science, Incheon (Korea, Republic of)

2010-06-15

This study is aimed to evaluate the position of mandibular foramen of mandibular prognathism patients using 3-dimensional CT images in order to reduce the chance of an anesthetic failure of the mandibular nerve and to prevent the damage to the inferior alveolar nerve during the orthognathic surgery. The control group consist of 30 patients with class I occlusion. The experimental group consist of 44 patients with class III malocclusion. Three-dimensional computed tomography was used to evaluate the position of the mandibular foramina. The distance between mandibular plane and mandibular foramen, class I was 25.385 mm, class III was 23.628 mm. About the distance between occlusal plane and mandibular foramen, class I was 1.478 mm, class III was 5.144 mm. The distance between posterior border plan of mandibular ramus and mandibular foramen had not statistically significant. About the distance between sagittal plane of mandible and mandibular foramen did not also showed statistically significant. The result of this study could help the clinicians to apprehend more accurate anatomical locations of the foramina on the mandible with various facial skeletal types. Thereby to perform more accurate block anesthesia of the mandibular nerve and osteotomy with minimal nerve damage. In addition, this study could provide fundamental data for any related researches about the location of the mandibular foramina for other purposes.

Radiologic study of mandibular foramen of mandibular prognathism by three-dimensional computed tomography

International Nuclear Information System (INIS)

Lee, Seung Hun; Moon, Cheol Hyun; Im, Jeong Soo; Seo, Hwa Jeong

2010-01-01

This study is aimed to evaluate the position of mandibular foramen of mandibular prognathism patients using 3-dimensional CT images in order to reduce the chance of an anesthetic failure of the mandibular nerve and to prevent the damage to the inferior alveolar nerve during the orthognathic surgery. The control group consist of 30 patients with class I occlusion. The experimental group consist of 44 patients with class III malocclusion. Three-dimensional computed tomography was used to evaluate the position of the mandibular foramina. The distance between mandibular plane and mandibular foramen, class I was 25.385 mm, class III was 23.628 mm. About the distance between occlusal plane and mandibular foramen, class I was 1.478 mm, class III was 5.144 mm. The distance between posterior border plan of mandibular ramus and mandibular foramen had not statistically significant. About the distance between sagittal plane of mandible and mandibular foramen did not also showed statistically significant. The result of this study could help the clinicians to apprehend more accurate anatomical locations of the foramina on the mandible with various facial skeletal types. Thereby to perform more accurate block anesthesia of the mandibular nerve and osteotomy with minimal nerve damage. In addition, this study could provide fundamental data for any related researches about the location of the mandibular foramina for other purposes.

Cephalometric evaluation of adult anterior open bite non-extraction treatment with Invisalign

Directory of Open Access Journals (Sweden)

Shuka Moshiri

Full Text Available ABSTRACT Objective: The purpose of this study was to evaluate, by means of cephalometric appraisal, the vertical effects of non-extraction treatment of adult anterior open bite with clear aligners (Invisalign system, Align Technology, Santa Clara, CA, USA. Methods: Lateral cephalograms of 30 adult patients with anterior open bite treated using Invisalign (22 females, 8 males; mean age at start of treatment: 28 years and 10 months; mean anterior open bite at start of treatment: 1.8 mm were analyzed. Pre- and post-treatment cephalograms were traced to compare the following vertical measurements: SN to maxillary occlusal plane (SN-MxOP, SN to mandibular occlusal plane (SN-MnOP, mandibular plane to mandibular occlusal plane (MP-MnOP, SN to mandibular plane (SN-MP, SN to palatal plane (SN-PP, SN to gonion-gnathion plane (SN-GoGn, upper 1 tip to palatal plane (U1-PP, lower 1 tip to mandibular plane (L1-MP, mesiobuccal cusp of upper 6 to palatal plane (U6-PP, mesiobuccal cusp of lower 6 to mandibular plane (L6-MP, lower anterior facial height (LAFH, and overbite (OB. Paired t-tests and descriptive statistics were utilized to analyze the data and assess any significant changes resulting from treatment. Results: Statistically significant differences were found in overall treatment changes for SN-MxOP, SN-MnOP, MP-MnOP, SN-MP, SN-GoGn, L1-MP, L6-MP, LAFH, and OB. Conclusions: The Invisalign system is a viable therapeutic modality for non-extraction treatment of adult anterior mild open bites. Bite closure was mainly achieved by a combination of counterclockwise rotation of the mandibular plane, lower molar intrusion and lower incisor extrusion.

Changes in the edentulous maxilla in persons wearing implant-retained mandibular overdentures

NARCIS (Netherlands)

Narhi, TO; Geertman, ME; Hevinga, M; Abdo, H; Kalk, W

Statement of problem. It has been suggested that risk for severe resorption in the anterior maxilla is increased in persons wearing mandibular implant-retained overdentures. However, little information is available about the changes in the edentulous maxilla after mandibular implant treatment.

Does the titanium plate fixation of symphyseal fracture affect mandibular growth?

Science.gov (United States)

Bayram, Burak; Yilmaz, Alev Cetinsahin; Ersoz, Esra; Uckan, Sina

2012-11-01

The effect of metallic fixation on growth is a major concern in children and is not yet clear. The aim of this study was to evaluate the effect of metallic fixation of mandibular symphyseal fracture on mandibular growth.Eighteen 90-day-old growing white New Zealand rabbits weighing 1.6 to 2.5 kg were included in this study and divided into 2 groups of 9 subjects. In the experimental group, animals underwent mandibular osteotomy, simulating a symphyseal fracture on the midline of mandibular symphysis. The bone segments were fixed with microplates and microscrews (1.6 mm).In the control group, the same surgical incision without performing symphyseal osteotomy was conducted, and 2 screws were inserted on each side of the symphyseal midline.Digital cephalometric and submentovertex radiographs were taken before the operation and at postoperative 6 months for each animal in 2 groups, and cephalometric measurements were performed. The distance between the centers of the head of 2 screws measured at the end of surgery in the control group was compared with measurements at 6 months after surgery. Obtained data were statistically analyzed.There is no statistically significant difference between the 2 groups for growth amount of both sides of the mandible. Difference of ANS-Id (the most anterior points of nasal bone, the most anterior point on the alveolar bone between the lower incisors) and Cd-Id (the uppermost and most distal point of the mandibular condyle, the most anterior point on the alveolar bone between the lower incisors) values of the 2 groups is not statistically significant (P > 0.05).The distance between the 2 screws at the first application significantly increased at the postoperative sixth month (P mandibular symphyseal fracture does not affect the vertical and sagittal mandibular growth in growing rabbits.

Piezosurgery for the Lingual Split Technique in Lingual Positioned Impacted Mandibular Third Molar Removal

Science.gov (United States)

Ge, Jing; Yang, Chi; Zheng, Jiawei; Qian, Wentao

2016-01-01

Abstract The aim of this study was to evaluate the effect and safety of lingual split technique using piezosurgery for the extraction of lingual positioned impacted mandibular 3rd molars with the goal of proposing a more minimally invasive choice for this common surgery. Eighty-nine consecutive patients with 110 lingual positioned impacted mandibular 3rd molars requiring extraction were performed the lingual split technique using piezosurgery. One sagittal osteotomy line and 2 transverse osteotomy line were designed for lingual and occlusal bone removal. The success rate, operative time, postoperative outcome, and major complications (including nerve injury, mandible fracture, severe hematoma or edema, and severe pyogenic infection) were documented and analyzed. All impacted mandibular 3rd molars were successfully removed (110/110). The average time of operation was 14.6 minutes (ranged from 7 to 28 minutes). One hundred and seven extraction sites (97.3%) were primary healing. Pain, mouth opening, swelling, and PoSSe scores on postoperative 7-day were 0.34 ± 0.63, 3.88 ± 0.66(cm), 2.4 ± 0.2(cm), and 23.7 ± 5.9, respectively. There were 6 cases (5.5%) had lingual nerve disturbance and 3 cases (2.7%) developed inferior alveolar nerve impairment, and achieved full recovery within 2 months by neurotrophic drug treatment. Our study suggested piezosurgery for lingual split technique provided an effective way for the extraction of lingual positioned and deeply impacted mandibular 3rd molar. PMID:27015214

Morphometric study on mandibular foramen and incidence of accessory mandibular foramen in mandibles of south Indian population and its clinical implications in inferior alveolar nerve block.

Science.gov (United States)

Shalini, R; RaviVarman, C; Manoranjitham, R; Veeramuthu, M

2016-12-01

The mandibular foramen is a landmark for procedures like inferior alveolar nerve block, mandibular implant treatment, and mandibular osteotomies. The present study was aimed to identify the precise location of the mandibular foramen and the incidence of accessory mandibular foramen in dry adult mandibles of South Indian population. The distance of mandibular foramen from the anterior border of the ramus, posterior border of the ramus, mandibular notch, base of the mandible, third molar, and apex of retromolar trigone was measured with a vernier caliper in 204 mandibles. The mean distance of mandibular foramen from the anterior border of ramus of mandible was 17.11±2.74 mm on the right side and 17.41±3.05 mm on the left side, from posterior border was 10.47±2.11 mm on the right side and 9.68±2.03 mm on the left side, from mandibular notch was 21.74±2.74 mm on the right side and 21.92±3.33 mm on the left side, from the base of the ramus was 22.33±3.32 mm on the right side and 25.35±4.5 mm on the left side, from the third molar tooth was 22.84±3.94 mm on the right side and 23.23±4.21 mm on the left side, from the apex of retromolar trigone was 12.27±12.13 mm on the right side and 12.13±2.35 mm on the left side. Accessory mandibular foramen was present in 32.36% of mandibles. Knowledge of location mandibular foramen is useful to the maxillofacial surgeons, oncologists and radiologists.

Perawatan gigi impaksi anterior rahang atas pada remaja (The treatment of maxillary anterior impacted teeth in adolescent

Directory of Open Access Journals (Sweden)

Herdi Eko Pranjoto

2005-09-01

Full Text Available The incidence of impacted tooth in adolescent is usually found by oral surgeon or orthodontist during their sequence of treatments. The maxillary anterior teeth, especially canine and third lower molar are the most common impacted teeth found as the result of their eruption disturbances. The surgical technique principle is to facilitate the impacted tooth, so that it can be erupted by creating a window and take the bone obstructed surrounding the tooth crown surgically and afterward it is orthodontically tracted. In a case of third molar germ which is predicted to be impacted in mesio version position, germinectomy is preferred to prevent anterior mechanical drive during its development which may cause mal-alignment of the mandibular teeth. Germinectomy which is usually easier than odontectomy, the germ position, and less complication after the surgical intervention are three factors that should be considered in making decision.

Lower molar and incisor displacement associated with mandibular remodeling.

Science.gov (United States)

Baumrind, S; Bravo, L A; Ben-Bassat, Y; Curry, S; Korn, E L

1997-01-01

The purpose of this study was to quantify the amount of alveolar modeling at the apices of the mandibular incisor and first molar specifically associated with appositional and resorptive changes on the lower border of the mandible during growth and treatment. Cephalometric data from superimpositions on anterior cranial base, mandibular implants of the Björk type, and anatomical "best fit" of mandibular border structures were integrated using a recently developed strategy, which is described. Data were available at annual intervals between 8.5 and 15.5 years for a previously described sample of approximately 30 children with implants. The average magnitudes of the changes at the root apices of the mandibular first molar and central incisor associated with modeling/remodeling of the mandibular border and symphysis were unexpectedly small. At the molar apex, mean values approximated zero in both anteroposterior and vertical directions. At the incisor apex, mean values approximated zero in the anteroposterior direction and averaged less than 0.15 mm/year in the vertical direction. Standard deviations were roughly equal for the molar and the incisor in both the anteroposterior and vertical directions. Dental displacement associated with surface modeling plays a smaller role in final tooth position in the mandible than in the maxilla. It may also be reasonably inferred that anatomical best-fit superimpositions made in the absence of implants give a more complete picture of hard tissue turnover in the mandible than they do in the maxilla.

Ihh signaling regulates mandibular symphysis development and growth.

Science.gov (United States)

Sugito, H; Shibukawa, Y; Kinumatsu, T; Yasuda, T; Nagayama, M; Yamada, S; Minugh-Purvis, N; Pacifici, M; Koyama, E

2011-05-01

Symphyseal secondary cartilage is important for mandibular development, but the molecular mechanisms underlying its formation remain largely unknown. Here we asked whether Indian hedgehog (Ihh) regulates symphyseal cartilage development and growth. By embryonic days 16.5 to 18.5, Sox9-expressing chondrocytes formed within condensed Tgfβ-1/Runx2-expressing mesenchymal cells at the prospective symphyseal joint site, and established a growth-plate-like structure with distinct Ihh, collagen X, and osteopontin expression patterns. In post-natal life, mesenchymal cells expressing the Ihh receptor Patched1 were present anterior to the Ihh-expressing secondary cartilage, proliferated, differentiated into chondrocytes, and contributed to anterior growth of alveolar bone. In Ihh-null mice, however, symphyseal development was defective, mainly because of enhanced chondrocyte maturation and reduced proliferation of chondroprogenitor cells. Proliferation was partially restored in dual Ihh;Gli3 mutants, suggesting that Gli3 is normally a negative regulator of symphyseal development. Thus, Ihh signaling is essential for symphyseal cartilage development and anterior mandibular growth.

Occlusal plane rotation: aesthetic enhancement in mandibular micrognathia.

Science.gov (United States)

Rosen, H M

1993-06-01

Patients afflicted with extreme degrees of mandibular micrognathia typically have vertically deficient rami as well as sagittally deficient mandibular bodies. This results in deficient posterior facial height, an obtuse gonial angle, excessively steep occlusal and mandibular planes, and a compensatory increase in anterior facial height. The entire maxillomandibular complex is overrotated in a clockwise direction. Standard orthognathic surgical correction fails to address this rotational deformity. As a consequence, the achieved projection of the lower face is inadequate, posterior facial height is further reduced, and occlusal and mandibular planes remain steep. Eleven patients with severe mandibular micrognathia underwent a surgical correction involving occlusal plane rotation to its normal orientation relative to Frankfort horizontal. This was accomplished by Le Fort I osteotomy to shorten the anterior maxilla (creating open bites in seven patients and making preexisting open bites worse in four patients) and sagittal split ramus osteotomies to advance and rotate the mandibular body counterclockwise, thus closing the surgically produced open bite. Counterclockwise rotation of the mandible afforded significantly greater sagittal displacement at the B point (mean 17 mm) than at the first molar (mean 10 mm) and produced adequate degrees of projection of the lower face when accompanied by a modest sliding genioplasty (mean 6.9 mm). Total advancement at the pogonion was a mean of 25.2 mm. In addition, posterior facial height was preserved, and mandibular and occlusal planes were normalized to mean angles of 27 and 10 degrees, respectively. At follow-up, which ranged from 9 to 24 months with a mean of 14.1 months, the mean sagittal relapse at the B point was 1.9 mm. Although heretofore considered unstable and therefore not clinically accepted, maxillomandibular counterclockwise rotation to normalize the occlusal plane rotational deformity provides stable, aesthetically

Semi-quantitative SPECT for anterior dislocation of the disc in the temporo-mandibular joint

Energy Technology Data Exchange (ETDEWEB)

Oesterreich, F.U.; Jend-Rossmann, I.; Jend, H.H.; Triebel, H.J.

1987-01-01

SPECT-examination of the TMJ using 99m-Tc-MDP was performed in 43 patients with arthrographically proven anterior dislocation of the disc and in 30 normals. The results were evaluated visually and also in a semi-quantitative manner that took account of relative 99m Tc activity in the TMJ and of the age of the patient. In the presence of arthrographically proven anterior, but reversible, disc dislocation, the semi-quantitative method proved positive in 75% of cases (28 cases). In joints with fixed anterior dislocation (29 cases), bone changes were demonstrated in 26%. Visual evaluation was positive in 50% of reversible, and in 72% of non-reversible dislocations. Semi-quantitative SPECT of the TMJ is excellent for demonstrating bone reaction resulting from TMJ dysfunction and for indicating the severity of the joint abnormality.

Transmigration of mandibular canine – case report

International Nuclear Information System (INIS)

Gruszka, Katarzyna; Różyło, T. Katarzyna; Różyło-Kalinowska, Ingrid; Denkiewicz, Katarzyna; Masłowska, Klaudia

2014-01-01

Transmigration is a phenomenon of movement of an unerupted tooth in the bone across the midline. This anomaly is not often found. Transmigration is more prevalent in females than in males, and more often encountered in the mandible than maxilla, it affects mostly canines. The aim of this study was to present a case report of a mandibular canine transmigration in a patient aged 12. Intraoral examination determined hypodontia of right second premolar and delayed eruption of left second premolar in maxilla, as well as persistent deciduous teeth: right second molar, left canine and second molar. The patient was referred for a Cone-Beam CT examination, which allowed precise visualization of the transmigrating canine as well as ruled out resorption of roots of mandibular incisors. The treatment with a maxillary fixed orthodontic appliance was finished after obtaining a satisfactory result. Proper alignment of the incisors in the anterior-posterior plane and correct midline position were accepted by the patient. Transmigrating canine after consultation with the surgeon was designed to further radiological observation

[Combined orthodontic-orthoganthic surgery to treat asymmetric mandibular excess malocclusions].

Science.gov (United States)

Li, Xiao-Bing; Chen, Song; Chen, Yang-Xi; Li, Jun

2005-06-01

To discuss the skeletal and dentoalveolar characteristics of asymmetric mandibular excess malocclusions and to discuss the procedures of combined orthodontic-orthonganthic surgery treatments of asymmetric mandibular excess malocclusions. 25 cases treated by combined orthodontic-orthognathic surgery treatments were reviewed to find out the specialties of this kind of therapy. The asymmetric of mandible presents anterior and posterior teeth tipped both sagitally and horizontally, as well as upper and lower jaws incompatibility. The pre-surgical orthodontic treatments included decomposition of anterior and posterior teeth, leveling and aligning the teeth etc. The post-surgical orthodontic treatments were to detail the occlusions. The patients all got functional and aesthetic good results after the combined orthodontic-orthognathic surgery treatments. The asymmetric mandibular excess affects the harmony of the face badly, and the correction of it must be carried out by the combined orthodontic-orthognathic surgery treatments. The pre- and post-surgical orthodontic treatments are the key stages to make the skeletal corrections stable.

Alleviation of mandibular anterior crowding with copper-nickel-titanium vs nickel-titanium wires: a double-blind randomized control trial.

Science.gov (United States)

Pandis, Nikolaos; Polychronopoulou, Argy; Eliades, Theodore

2009-08-01

The purpose of this study was to investigate the efficiency of copper-nickel-titanium (CuNiTi) vs nickel-titanium (NiTi) archwires in resolving crowding of the anterior mandibular dentition. Sixty patients were included in this single-center, single-operator, double-blind randomized trial. All patients were bonded with the In Ovation-R self-ligating bracket (GAC, Central Islip, NY) with a 0.022-in slot, and the amount of crowding of the mandibular anterior dentition was assessed by using the irregularity index. The patients were randomly allocated into 2 groups of 30 patients, each receiving a 0.016-in CuNiTi 35 degrees C (Ormco, Glendora, Calif) or a 0.016-in NiTi (ModernArch, Wyomissing, Pa) wire. The type of wire selected for each patient was not disclosed to the provider or the patient. The date that each patient received a wire was recorded, and all patients were followed monthly for a maximum of 6 months. Demographic and clinical characteristics between the 2 wire groups were compared with the t test or the chi-square test and the Fisher exact test. Time to resolve crowding was explored with statistical methods for survival analysis, and alignment rate ratios for wire type and crowding level were calculated with Cox proportional hazards multivariate modeling. The type of wire (CuNiTi vs NiTi) had no significant effect on crowding alleviation (129.4 vs 121.4 days; hazard ratio, 1.3; P >0.05). Severe crowding (>5 on the irregularity index) showed a significantly higher probability of crowding alleviation duration relative to dental arches with a score of wires in laboratory and clinical conditions might effectively eliminate the laboratory-derived advantage of CuNiTi wires.

Observation of horizontal mandibular positions in an edentulous patient using a digital gothic arch tracer: a clinical report.

Science.gov (United States)

Watanabe, Yoshiyuki

2004-01-01

Dentures were fabricated for a 73-year-old woman using porcelain 20-degree maxillary posterior teeth and acrylic resin flat planes in the mandibular posterior region. A digital gothic arch tracing device was used to observe the horizontal mandibular positions before insertion and to evaluate the therapeutic effect of the diagnostic dentures at 1 and 3 months after insertion.

Golden proportion assessment between maxillary and mandibular teeth on Indian population

Science.gov (United States)

Kumar, Vaikunth Vijay; Rangarajan, Vedantham

2012-01-01

PURPOSE This study evaluated the existence of golden proportion between the widths of the maxillary and mandibular anterior teeth in Indian population. MATERIALS AND METHODS The clinical tooth width measurements were recorded with the digital vernier calipers on 576 patients of both sexes in the age group of 21 - 30 years. Flexible ruler was used to determine the width of maxillary and mandibular anterior teeth on the patients by the same operator. The data obtained was statistically analyzed using paired student t-test (α=.05). RESULTS The golden proportion was not found between the width of the right central and lateral incisors in 53% of women and 47% of men. The results revealed the golden percentage was rather inconstant in terms of relative tooth width. CONCLUSION The golden proportion is an inappropriate method to relate the successive widths of the maxillary anterior teeth in Indian population. PMID:22737310

Locating Mandibular Foramen in Children with Mandibular Retrognathism in Mixed Dentition

Directory of Open Access Journals (Sweden)

Mehrsa Paryab

2015-06-01

Full Text Available Background and aims. One of the most common reasons forthe inferior alveolar nerve block anesthesia failure is the variation in mandibular foramen location. The aim of this study was to assess the location of mandibular foramen in chil-dren with mandibular retrognathism in comparison to children with normal skeletal occlusion in the mixed dentition. Materials and methods. One hundred and twenty panoramic radiographs of patients in mixed dentition period, undergo-ing orthodontic treatment, were selected based on inclusion criteria, skeletal occlusion and stage of dental development. The radiographs were divided into two groups: I: 60 panoramic radiographs of patients with normal skeletal occlusion (15 in each of the Hellman dental age stages; II: 60 panoramic radiographs of patients with mandibular retrognathism (15 in each of the Hellman dental age stages. The radiographs were traced and the linear distance from the mandibular foramen to the borders of the mandibular ramus and its angular position were identified. The measurements were compared between the two groups and among the four dental age groups by t-test, ANOVA and post hoc tests. Results. No statistically significant differences werefound between the patients with normal skeletal occlusion and patients with mandibular retrognathism (P>0.05. Statistical tests showed significant differences in the vertical location of mandibu-lar foramen and gonial angle between the four dental age groups (P<0.05. Conclusion. Mandibular retrognathism does not have a significant impact on the location of the mandibular foramen in the mixed dentition period. The child’s dental age would be considered in the localization of the mandibular foramen.

Nonsurgical correction of a Class III malocclusion in an adult by miniscrew-assisted mandibular dentition distalization.

Science.gov (United States)

Jing, Yan; Han, Xianglong; Guo, Yongwen; Li, Jingyu; Bai, Ding

2013-06-01

This article reports the successful use of miniscrews in the mandible to treat a 20-year-old Mongolian woman with a chief complaint of anterior crossbite. The patient had a skeletal Class III malocclusion with a mildly protrusive mandible, an anterior crossbite, and a deviated midline. In light of the advantages for reconstruction of the occlusal plane and distal en-masse movement of the mandibular arch, we used a multiloop edgewise archwire in the initial stage. However, the maxillary incisors were in excessive labioversion accompanied by little retraction of the mandibular incisors; these results were obviously not satisfying after 4 months of multiloop edgewise archwire treatment. Two miniscrews were subsequently implanted vertically in the external oblique ridge areas of the bilateral mandibular ramus as skeletal anchorage for en-masse distalization of the mandibular dentition. During treatment, the mandibular anterior teeth were retracted about 4.0 mm without negative lingual inclinations. The movement of the mandibular first molar was almost bodily translation. The maxillary incisors maintained good inclinations by rotating their brackets 180° along with the outstanding performance of the beta-titanium wire. The patient received a harmonious facial balance, an attractive smile, and ideal occlusal relationships. The outcome was stable after 1 year of retention. Our results suggest that the application of miniscrews in the posterior area of the mandible is an effective approach for Class III camouflage treatment. This technique requires minimal compliance and is particularly useful for correcting Class III patients with mild mandibular protrusion and minor crowding. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Head position in the MEG helmet affects the sensitivity to anterior sources.

Science.gov (United States)

Marinkovic, K; Cox, B; Reid, K; Halgren, E

2004-11-30

Current MEG instruments derive the whole-head coverage by utilizing a helmet-shaped opening at the bottom of the dewar. These helmets, however, are quite a bit larger than most people's heads so subjects commonly lean against the back wall of the helmet in order to maintain a steady position. In such cases the anterior brain sources may be too distant to be picked up by the sensors reliably. Potential "invisibility" of the frontal and anterior temporal sources may be particularly troublesome for the studies of cognition and language, as they are subserved significantly by these areas. We examined the sensitivity of the distributed anatomically-constrained MEG (aMEG) approach to the head position ("front" vs. "back") secured within a helmet with custom-tailored bite-bars during a lexical decision task. The anterior head position indeed resulted in much greater sensitivity to language-related activity in frontal and anterior temporal locations. These results emphasize the need to adjust the head position in the helmet in order to maximize the "visibility" of the sources in the anterior brain regions in cognitive and language tasks.

CHANGE IN CONDYLAR POSITION AND SKELETAL STABILITY ASSESSMENT FOLLOWING BSSO FOR MANDIBULAR SET BACK

Directory of Open Access Journals (Sweden)

Manjunath

2015-09-01

Full Text Available Change in condylar position following mandibular bilateral sagittal split osteotomy (BSSO has been implicated as an important factor in the appearance of immediate postoperative relapse during rigid fixation. It has been suggested that the control of the condylar segment following BSSO is the most important aspect in preventing relapse. The study was done to evaluate changes in position of condyle taken with lateral and frontal cephalograms with 20 patients were assessed, 10 male and 10 female patients wer e divided as group 1 and group 2. Patients undergoing sagittal split ramus osteotomy for mandibular set back were selected; radiographs before operation/surgery, immediately after surgery, 3 months and 6 months post - surgery. Differences between groups were measured by PAIRED ‘T’ TEST a nd time dependent changes in cephalometric measurements were examined by FISCHERS TEST. The present study results conclude significant difference occurring in both proximal and distal segment including condyle. Occlusal stabil ity and skeletal stability also maintained post operatively

Roentgenographic study of the mandibular canal

International Nuclear Information System (INIS)

Ahn, Hyung Kyu

1980-01-01

The mandibular canal must be considered carefully during the surgical treatment, especially surgical extraction of the impacted tooth and intraosseous implant, because it contains the important inferior alveolar nerve and vessels. The author investigated the curvature of the mandibular canal and its relation to the mandibular molars and positional relation between the mental foramen and the mandibular premolars in orthopantomogram. The materials consisted of 441 orthopantomograms divided four groups; Group I consisted of 56 males and 44 females from 1 to 6 years of age, Group II consisted of 58 males and 45 females from 7 to 12 years of age, Group III consisted of 65 males and 33 females from 13 to 18 years of age, Group IV consisted of 86 males and 54 females over 19 years of age. The results were as followings; 1. The curvature of mandibular canal was 144.50 .deg. in Group II, 148.11 .deg. in Group III, 147.33 .deg. in Group IV. 2. The curvature of mandibular canal was located most frequently on the area between mandibular 1st molar and mandibular 2nd molar in Group I (42%) and on the mandibular 2nd molar area in Group II (54%), Group III (59%), Group IV (53%). 3. The position of mental foramen was most frequently below the mandibular 1st premolar in Group I (58%), between the mandibular 1st premolar and the 2nd premolar in Group II (62%), Group III (47%), and below the mandibular 2nd premolar in Group IV (58%).

Piezosurgery for the Lingual Split Technique in Lingual Positioned Impacted Mandibular Third Molar Removal: A Retrospective Study.

Science.gov (United States)

Ge, Jing; Yang, Chi; Zheng, Jiawei; Qian, Wentao

2016-03-01

The aim of this study was to evaluate the effect and safety of lingual split technique using piezosurgery for the extraction of lingual positioned impacted mandibular 3rd molars with the goal of proposing a more minimally invasive choice for this common surgery.Eighty-nine consecutive patients with 110 lingual positioned impacted mandibular 3rd molars requiring extraction were performed the lingual split technique using piezosurgery. One sagittal osteotomy line and 2 transverse osteotomy line were designed for lingual and occlusal bone removal. The success rate, operative time, postoperative outcome, and major complications (including nerve injury, mandible fracture, severe hematoma or edema, and severe pyogenic infection) were documented and analyzed.All impacted mandibular 3rd molars were successfully removed (110/110). The average time of operation was 14.6 minutes (ranged from 7 to 28 minutes). One hundred and seven extraction sites (97.3%) were primary healing. Pain, mouth opening, swelling, and PoSSe scores on postoperative 7-day were 0.34 ± 0.63, 3.88 ± 0.66(cm), 2.4 ± 0.2(cm), and 23.7 ± 5.9, respectively. There were 6 cases (5.5%) had lingual nerve disturbance and 3 cases (2.7%) developed inferior alveolar nerve impairment, and achieved full recovery within 2 months by neurotrophic drug treatment.Our study suggested piezosurgery for lingual split technique provided an effective way for the extraction of lingual positioned and deeply impacted mandibular 3rd molar.

Superolateral dislocation of an intact mandibular condyle into the temporal fossa: case report and literature review.

Science.gov (United States)

Sharma, Divashree; Khasgiwala, Ankit; Maheshwari, Bharat; Singh, Charanpreet; Shakya, Neelam

2017-02-01

Temporomandibular joint dislocation refers to the dislodgement of mandibular condyle from the glenoid fossa. Anterior and anteromedial dislocations of the mandibular condyle are frequently reported in the literature, but superolateral dislocation is a rare presentation. This report outlines a case of superolateral dislocation of an intact mandibular condyle that occurred in conjunction with an ipsilateral mandibular parasymphysis fracture. A review of the clinical features of superolateral dislocation of the mandibular condyle and the possible techniques of its reduction ranging from the most conservative means to extensive surgical interventions is presented. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Mandibular Range of Movement and Pain Intensity in Patients with Anterior Disc Displacement without Reduction

Directory of Open Access Journals (Sweden)

Marijana Gikić

2015-01-01

Full Text Available Objective: Temporomandibular disorders (TMD are the most common source of orofacial pain of a non-dental origin. The study was performed to investigate the therapeutic effect of the conventional occlusal splint therapy and the physical therapy. The hypothesis tested was that the simultaneous use of occlusal splint and physical therapy is an effective method for treatment of anterior disc displacement without reduction. Materials and Methods: Twelve patients (mean age =30.5 y with anterior disc displacement without reduction (according to RDC/TMD and confirmed by magnetic resonance imaging were randomly allocated into 2 groups: 6 received stabilization splint (SS and 6 received both physical therapy and stabilization splint (SS&PT. Treatment outcomes included pain-free opening (MCO, maximum assisted opening (MAO, path of mouth opening and pain as reported on visual analogue scale (VAS. Results: At baseline of treatment there were no significant differences among the groups for VAS scores, as well as for the range of mandibular movement. VAS scores improved significantly over time for the SS&PT group (F=28.964, p=0.0001, effect size =0.853 and SS group (F=8.794, p=0.001, effect size =0.638. The range of mouth opening improved significantly only in the SS&PT group (MCO: F=20.971, p=0.006; MAO: F=24.014, p=0.004 (Figure 2. Changes in path of mouth opening differ significantly between the groups (p=0.040. Only 1 patient in SS&PT group still presented deviations in mouth opening after completed therapy while in the SS group deviations were present in 5 patients after completed therapy. Conclusion: This limited study gave evidence that during the treatment period lasting for 6 months, the simultaneous use of stabilization splint and physical therapy was more efficient in reducing deviations and improving range of mouth opening than the stabilization splint used alone. Both treatment options were efficient in reducing pain in patients with anterior disc

Evaluation of Relative Position of Mandibular Foramen in Children as a Reference for Inferior Alveolar Nerve Block using Orthopantamograph.

Science.gov (United States)

Krishnamurthy, Navin Hadadi; Unnikrishnan, Surej; Ramachandra, Jaya Agali; Arali, Veena

2017-03-01

The Mandibular Foramen (MF) is a landmark for administering local anaesthetic solution for Inferior Alveolar Nerve Block (IANB). The position of MF shows considerable variation among different ethnicity, ages and on either sides even within the same individual. Failure to achieve IANB leading to repeated injection of the local anaesthetic solution will not only pose a behaviour problem in children but can also lead to systemic toxic level of anaesthetic solution being administered. To determine the relative position of the mandibular foramen in 7 to 12-year-old children in relation to the mandibular occlusal plane and the deepest point on coronoid notch. Ninety orthopantamograph of 7 to 12-year-old children were selected from the database and were divided into three groups: Group 1 (G1): seven to eight-year-old, Group 2 (G2): 9 to 10-year-old and Group 3 (G3): 11 to 12-year-old. The radiographs were traced on acetate paper, anatomical landmarks were marked and linear measurements were noted from the Mandibular Lingula (ML) to the occlusal plane, and to the deepest point on coronoid notch. The data obtained was tabulated and subjected to statistical analysis. One way ANOVA test followed by Bonferroni post hoc analysis and Student's paired t-test were used. Mandibular foramen is approximately, 2-3 mm above the occlusal plane and 11.6-13.0 mm from deepest point of coronoid notch for seven to eight-year-old children, 3-4 mm above the occlusal plane and 13.0-13.9 mm from deepest point of coronoid notch for 9-10 year age group and 5.5-6.5 mm above the occlusal plane and 11.9-12.2 mm from deepest point of coronoid notch for children of the ages 11-12 years. The linear distance from the deepest point of coronoid notch to the mandibular lingula showed statistical significance in G2 vs G3 on right side G1 vs G2 and G2 vs G3 on the left side. The variance of this distance for either side showed statistical significance for G1 and G2. The distance from the mandibular lingula

Assessment of the relationship between the mandibular third molar and the mandibular canal using panoramic radiograph and cone beam computed tomography

International Nuclear Information System (INIS)

Jung, Yun Hoa; Nah, Kyung Soo; Cho, Bong Hae

2008-01-01

The purpose of this study is to evaluate the position of the mandibular canal in relation to the mandibular third molar by cone beam CT in cases showing a close relationship between the third molar and the mandibular canal on the panoramic radiograph. The panoramic images and cone beam CT scans of 87 impacted mandibular third molars in 60 patients were evaluated to assess the tooth relationship to the mandibular canal. The clearness of the canal wall and the vertical depth of the lower third molar were evaluated on panoramic radiographs. The lower third molars were assessed using cone beam CT to determine the proximity and position of the canal relative to the roots. In the 66 cases where the canal wall was unclear on the panoramic radiographs, 58 (87.9%) of the third molars had contact between the canal and root; 34 (51.5%) canals were showed an inferior position and 22 (33.3%) showed a linguoinferior position on cone beam CT. Interruption of the canal wall on panoramic radiographs was highly predictive of contact between the mandibular canal and the third molar. Cross sectional CT may be indicated for localization of the mandibular canal in such cases.

Efectos de los aparatos propulsores mandibulares fijos en la articulación temporomandibular

OpenAIRE

Palomino-Gómez, Sandra P; Almeida, Kelei M; de Mello, Patricia B; Restrepo, Manuel; Ravelr, Dirceu B

2014-01-01

Resumen Los aparatos propulsores mandibulares fijos son una alternativa en el tratamiento de la maloclusión Clase II con deficiencia mandibular. La propiedad de ser fijo, condiciona a la mandíbula a una posición anterior forzada en reposo y durante todas las funciones mandibulares. Cuando se utiliza un aparato de propulsión, la mandíbula se desplaza hacia delante y hacia abajo. Este movimiento conduce a una nueva posición al cóndilo, que puede afectar el funcionamiento normal de la articulaci...

Occlusion and Temporomandibular Function among Subjects with Mandibular Distal Extension Removable Partial Dentures

Science.gov (United States)

Creugers, N. H. J.; Witter, D. J.; Van 't Spijker, A.; Gerritsen, A. E.; Kreulen, C. M.

2010-01-01

Objective. To quantify effects on occlusion and temporomandibular function of mandibular distal extension removable partial dentures in shortened dental arches. Methods. Subjects wearing mandibular extension removable partial dentures (n = 25) were compared with subjects with shortened dental arches without extension (n = 74) and with subjects who had worn a mandibular extension removable partial denture in the past (n = 19). Subjects with complete dentitions (n = 72) were controls. Data were collected at baseline and at 3-, 6-, and 9-year observations. Results. Occlusal activity in terms of reported awareness of bruxism and occlusal tooth wear of lower anterior teeth did not differ significantly between the groups. In contrast, occlusal tooth wear of premolars in shortened dental arches with or without extension dentures was significantly higher than in the controls. Differences amongst groups with respect to signs and symptoms related to temporomandibular disorders were not found. Occlusal support of the dentures did not influence anterior spatial relationship. Occlusal contacts of the denture teeth decreased from 70% for second premolars via 50% for first molars, to 30% for second molars. Conclusions. Mandibular distal extension removable partial dentures in moderate shortened dental arches had no effects on occlusion and temporomandibular function. PMID:20671961

Rotational movements of mandibular two-implant overdentures.

Science.gov (United States)

Kimoto, Suguru; Pan, Shaoxia; Drolet, Nicolas; Feine, Jocelyne S

2009-08-01

Clinicians have reported that their patients complain that their mandibular two-implant overdentures (IOD) rotate. Therefore, we studied the frequency and severity of rotation of IODs with two-ball attachments, how rotation may influence perceived satisfaction ratings of chewing ability, and the factors that are involved in the rotation of IODs. Seventy-nine participants were recruited and asked to rate their general satisfaction of their IODs, as well as their ability to chew foods, the existence of any mandibular denture rotation, and to what degree denture rotation bothered them. Data on participant sociodemographic, anatomical, and prosthesis characteristics were also collected. Student's t-test and logistic regression analyses were performed to analyze the differences between participants who did (R group) and did not report (NR group) denture rotation. Thirty-seven of 79 participants were aware of rotational movement in their IODs. These patients were significantly less satisfied with their chewing ability than those who felt no rotation (69.1 mm R group vs. 82.9 mm), and discomfort caused by the rotation bothered them moderately (39/100 mm). The multivariate logistic regression analysis revealed that the arrangement of the anterior teeth and the length of the denture are significantly associated with awareness of denture rotation. Thirty-eight percent in the R group and 31% in the NR group had non-scheduled visits. Rotational movement with a mandibular two-IOD has a negative effect on perceived chewing ability and is associated with anterior tooth arrangement and denture length.

Anterior mandibular swelling – A Case Report Praveen B.N1 ...

African Journals Online (AJOL)

mwakagugu

Although clinical and radiographic features were suggestive of central giant cell granuloma, histopathological ... cm crossing the midline, extending from the left lower second ... gingival recession. Radiographic investigations were done. Mandibular .... section revealed cells with vesicular nucleus and mitotic figures. Though ...

Algorithm of imaging modalities in cases of mandibular fractures

International Nuclear Information System (INIS)

Mihailova, H.

2009-01-01

Mandibular fracture is the most common bone fracture of maxillo-facial trauma. Up to now the main method for examination of the mandible is radiography. The aim of the issue is to present an algorithm of imaging modalities for investigation of patients in cases of mandibular trauma. It consists of series of X ray techniques and views of the facial skull named mandibulo-facial. This standardizes mandibulo-facial series includes exactly determined four projections done by conventional X ray techniques: posterior-anterior view of skull (PA or AP), oblique view of the left mandible; oblique view of the right mandible; occipito-mental view. Using these four planned radiograms is obligatory for each mandibular trauma. Panoramic X-ray is obligatory in cases of apparatus availability; this abolish only oblique views (left and right). Occipito-mental view of the skull gives anatomically better the coronoid process of the mandible, the zygoma complex, the orbital edges and maxillar sinus than Waters projection. So mandibulo-facial series of four planned radiograms is not only for diagnostic of mandibular fractures, but as a screening of mandibulo-facial trauma too. Thus using algorithm of imaging modalities in cases of mandibular fracture leads to optimization of diagnostic process in patients with mandibular trauma. (author)

The nance lingual arch: an auxiliary device in solving lower anterior crowding.

Science.gov (United States)

Almeida, Renato Rodrigues de; Oltramari-Navarro, Paula Vanessa Pedron; Almeida, Marcio Rodrigues de; Conti, Ana Cláudia de Castro Ferreira; Navarro, Ricardo de Lima; Pacenko, Murilo Rizental

2011-01-01

After exfoliation of the primary incisors and eruption of the permanent incisors, the dentist has the opportunity of observing closely the beginning of occlusal changes. In several cases, alterations, such as lower anterior crowding, can be prevented and treated with proper follow-up. In the mixed dentition, one of the mechanisms for maintaining space and favoring dental alignment is to preserve leeway space before permanent second molar irruption. Among the devices with this function, the Nance lingual arch helps maintaining the position of the permanent mandibular molars and incisors after a premature loss of the primary canines. This paper describes the applicability of Nance lingual arch for preserving leeway space, thus contributing for correction of lower anterior crowding.

Maxillary and mandibular contribution to the establishment of class II malocclusion in an adult Lebanese population.

Science.gov (United States)

El Hajj, Nadine; Bassil-Nassif, Nayla; Tauk, Alain; Mouhanna-Fattal, Carole; Bouserhal, Joseph P

2017-12-01

The main aim of this study was to describe the contribution of the maxilla and the mandible to the establishment of a Class II skeletal malocclusion in an adult Lebanese population. Secondary aims were to detect the presence of sex-based dimorphism and to study the influence of the vertical dimension on the Class II skeletal pattern. A sample of 90 adults in skeletal Class II was recruited and equally distributed according to sex and vertical typology. The study describes the skeletal and dentoalveolar cephalometric characteristics of the Class II sample, essentially according to Coben's cephalometric analysis. The total effective depth of the cranial base and the anterior cranial base angle (SN-BaH) were both greater in the Class II sample. In females, the effective depth of the maxilla (Ptm-A) was larger than normal while SNB was smaller. The parameters describing the size and shape of the body of the mandible were significantly different from those of normal subjects. The upper incisors were in a retrusive position, while the axis of the lower incisors was located normally. The mandibular molars had a more distal sagittal position. Hyperdivergent subjects had more significant posterior alveolar growth, a more retrusive mandibular position and smaller mandibular dimensions than the other two vertical sub-groups. The cranial base contributes to the establishment of a Class II malocclusion, and mandibular retrusion cannot be considered as a characteristic shared by all skeletal Class II subjects. Lessening of the absolute length of the mandibular body is the second most frequent etiological factor noted in the Class II sample studied. Most individuals in skeletal Class II have an associated dental Class II malocclusion, and the vertical dimension has an influence on the Class II skeletal pattern. Copyright © 2017 CEO. Published by Elsevier Masson SAS. All rights reserved.

Influence of implant number on the movement of mandibular implant overdentures.

Science.gov (United States)

Oda, Ken; Kanazawa, Manabu; Takeshita, Shin; Minakuchi, Shunsuke

2017-03-01

The rotational movement of an implant overdenture (IOD) has a negative effect on the perceived masticatory ability of the denture wearer. However, the influence of implant number on the movement of IODs has not been investigated. The purpose of this in vitro study was to evaluate the denture movement of mandibular IODs anchored by different numbers of implants. An edentulous mandibular test model with artificial mucosa and 5 experimental overdentures (N=5) was fabricated. The locator attachment system with blue nylon inserts was chosen for this study. Three implant positions were prepared: anterior midline (1-IOD), bilateral lateral incisor regions (2-IOD), and anterior midline and bilateral canine regions (3-IOD). Vertical loads of 50 N were applied to the mid-anterior region, the left canine region, the left premolar region, and the left first molar region. The vertical and horizontal displacements at the right distal edge and the vertical displacements at the loading point were measured. The displacement values were statistically analyzed using a 1-way analysis of variance and the post hoc Tukey honest significant difference test with the implant number as a factor. In addition, the values of the vertical and horizontal displacements at the distal edge of the overdenture were statistically compared using a paired t test, and the values of the vertical displacement at the distal edge of the overdenture were statistically analyzed by a repeated measures analysis of variance and the post hoc Tukey honest significance difference test with the loading point as a factor (a=.05). Upon anterior loading, the 2-IOD showed significantly larger vertical displacements at the right distal edge than the 1-IOD or 3-IOD (P.05). Within the limitations of this in vitro study, the following conclusions were drawn: During mastication with the anterior teeth, the use of 2 implants for anchoring an IOD increased the rotation of the denture base more than the use of 1 or 3 implants

Changes in the Position of Mandibular Third Molars Following Extraction and Non-Extraction Orthodontic Treatments

Directory of Open Access Journals (Sweden)

Maryam Poosti

2012-09-01

Full Text Available Introduction: Impaction of third molars can be associated with a number of sequelae, each requiring a different type of treatment. The purpose of this study was to assess the changes in the position of lower third molars following extraction and non-extraction orthodontic treatments. Methods: Pre- and post-treatment panoramic radiographs of 26 class I malocclusion patients (4 male and 22 female who were treated on a non-extraction basis were compared with those of 30 class I malocclusion patients (5 male and 25 female who received orthodontic treatment following the extraction of all first premolars. In each group, the lower third molar angulations and their distance from the lower border of the mandible were assessed. Results: Paired t-tests and independent t-tests detected significant changes in the position of the lower third molars in the extraction group. Both the left and right molars became more upright and their distance from the lower border of the mandible increased. Similar changes were only seen in the position of the right mandibular third molars in the non-extraction group. Conclusion: Tooth extractions can bring about favorable changes in the position of mandibular third molars and possibly reduce their incidence of impaction.

Changes in the Position of Mandibular Third Molars Following Extraction and Non-Extraction Orthodontic Treatments

Directory of Open Access Journals (Sweden)

Maryam Poosti

2013-01-01

Full Text Available Introduction: Impaction of third molars can be associated with a number of sequelae, each requiring a different type of treatment. The purpose of this study was to assess the changes in the position of lower third molars following extraction and non-extraction orthodontic treatments. Methods: Pre- and post-treatment panoramic radiographs of 26 class I malocclusion patients (4 male and 22 female who were treated on a non-extraction basis were compared with those of 30 class I malocclusion patients (5 male and 25 female who received orthodontic treatment following the extraction of all first premolars. In each group, the lower third molar angulations and their distance from the lower border of the mandible were assessed. Results: Paired t-tests and independent t-tests detected significant changes in the position of the lower third molars in the extraction group. Both the left and right molars became more upright and their distance from the lower border of the mandible increased. Similar changes were only seen in the position of the right mandibular third molars in the non-extraction group. Conclusion: Tooth extractions can bring about favorable changes in the position of mandibular third molars and possibly reduce their incidence of impaction

Occlusion and Temporomandibular Function among Subjects with Mandibular Distal Extension Removable Partial Dentures

Directory of Open Access Journals (Sweden)

N. H. J. Creugers

2010-01-01

Full Text Available Objective. To quantify effects on occlusion and temporomandibular function of mandibular distal extension removable partial dentures in shortened dental arches. Methods. Subjects wearing mandibular extension removable partial dentures (n=25 were compared with subjects with shortened dental arches without extension (n=74 and with subjects who had worn a mandibular extension removable partial denture in the past (n=19. Subjects with complete dentitions (n=72 were controls. Data were collected at baseline and at 3-, 6-, and 9-year observations. Results. Occlusal activity in terms of reported awareness of bruxism and occlusal tooth wear of lower anterior teeth did not differ significantly between the groups. In contrast, occlusal tooth wear of premolars in shortened dental arches with or without extension dentures was significantly higher than in the controls. Differences amongst groups with respect to signs and symptoms related to temporomandibular disorders were not found. Occlusal support of the dentures did not influence anterior spatial relationship. Occlusal contacts of the denture teeth decreased from 70% for second premolars via 50% for first molars, to 30% for second molars. Conclusions. Mandibular distal extension removable partial dentures in moderate shortened dental arches had no effects on occlusion and temporomandibular function.

The Ultrasonographic Determination of the Position of the Mental Foramen and its Relation to the Mandibular Premolar Teeth.

Science.gov (United States)

Laher, Abdullah Ebrahim; Motara, Feroza; Moolla, Muhammed

2016-06-01

The position of the mental foramen has been well researched in cadaver specimens, radiographically as well as intraoperatively. To our knowledge, this landmark study is the first to make use of ultrasonography in a study population to determine the position of the mental foramen in relation to the mandibular premolar teeth. Ultrasonography has great potential to further revolutionize the practice of medicine and dento-maxillofacial surgery. To make use of ultrasound to determine the position of the mental foramen and its relation to the mandibular premolar teeth. One hundred Black and Caucasian subjects were enrolled. A high frequency (8MHz) transducer (PLF.805ST) of a diagnostic ultrasound system (model SSA-510A) was applied above the inferior border of the mandible, just lateral to the mentum. With the marker of the transducer pointing cranially, the position of the mental foramen in relation to the closest mandibular premolar tooth was determined. The position was compared across race, sex and age groups. All mental foramina (100%) were visualised. Overall the most frequent position of the mental foramen was in line with the long axis of the second premolar on the right (44%) and between the first and second premolars on the left (44%). There were no statistical differences (p >0.05) between race groups, sex and age groups with regard to the position of the mental foramen in relation to the mandibular premolars. However, in Blacks, the most frequent position of the mental foramen was in line with the long axis of the second premolar and in Caucasians the most common position was between the first and second premolars. The most frequent position of the mental foramen in females was in line with the long axis of the second premolar on the right and between the first and second premolars on the left. In males, the most frequent position of the mental foramen was in line with the long axis of the second premolar bilaterally. The most common position of the mental

An Atypical Variant of Superolateral Dislocation of the Mandibular Condyle: A Case Report.

Science.gov (United States)

Malik, Kapil; Debnath, Subhas C; Adhyapok, Apurba K; Hazarika, Kriti

2017-10-01

Dislocation of the mandibular condyle from the glenoid fossa can occur in anterior, posterior, lateral, and superior directions. Posterior, lateral, and superior dislocations are rare. Superolateral dislocation is seldom encountered in clinical practice. It is generally associated with fracture of the anterior or contralateral side of the mandible. The occurrence of superolateral dislocation of the condyle hooked above the zygomatic arch with an associated fracture of the medial pole of the condyle is rare and has been reported only once in the literature. This report describes another case in which the patient had superolateral dislocation of the mandibular condyle with a fractured medial pole without any associated fracture of the anterior or contralateral side of the mandible. The condyle was hooked laterally above the zygomatic arch. Open reduction of the dislocated condyle was performed and a good outcome was obtained. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Possibility of estimating three-dimensional mandibular morphology by cephalogram analysis

International Nuclear Information System (INIS)

Kim, S.; Motegi, Etsuko; Kikuchi, Yu; Yamaguchi, Hideharu; Takaki, Takashi; Shibahara, Takahiko

2007-01-01

The purpose of this study was to investigate the possibility of a surmise of three-dimensional mandibular morphology by two-dimensional cephalogram analysis. The materials were three-dimensional CT and cephalogram of 20 female mandibular prognathism patients (average age: 25.20±7.49) before there orthognathic surgery. Mandibular bone volume and sponge bone width were calculated from three-dimensional images constructed from CT images using imaging software (Real Intage, KGT inc.). There was a positive correlation (r=0.72) between mandibular volume value and mandibular ramus width. There was a positive correlation between sponge bone width at the site of the mandibular cuspid and mandibular ramus width and SNB angle (r=0.80), and between sponge bone width at the site of the mandibular molar and symphysis height and mandibular ramus width (r=0.81). It was thought that these results will be useful for a surmise of three-dimensional mandibular morphology by cephalogram analysis. (author)

[Mandibular-driven simultaneous maxillo-mandibular distraction for hemifacial microsomia with rapid prototyping technology].

Science.gov (United States)

Gao, Quan-Wen; Song, Hui-Feng; Xu, Ming-Huo; Liu, Chun-Ming; Chai, Jia-Ke

2013-11-01

To explore the clinical application of mandibular-driven simultaneous maxillo-mandihular distraction to correct hemifacial microsomia with rapid prototyping technology. The patient' s skull resin model was manufactured with rapid prototyping technology. The osteotomy was designed on skull resin model. According to the preoperative design, the patients underwent Le Fort I osteotomy and mandibular ramus osteotomy. The internal mandible distractor was embedded onto the osteotomy position. The occlusal titanium pin was implanted. Distraction were carried out by mandibular-driven simultaneous maxillo-mandihular distraction 5 days after operation. The distraction in five patients was complete as designed. No infection and dysosteogenesis happened. The longest distance of distraction was 28 mm, and the shortest distance was 16 mm. The facial asymmetry deformity was significantly improved at the end of distraction. The ocelusal plane of patients obviously improved. Rapid prototyping technology is helpful to design precisely osteotomy before operation. Mandibular-driven simultaneous maxillo-mandibular distraction can correct hemifacial microsomia. It is worth to clinical application.

MRI of the temporo-mandibular joint: which sequence is best suited to assess the cortical bone of the mandibular condyle? A cadaveric study using micro-CT as the standard of reference

International Nuclear Information System (INIS)

Karlo, Christoph A.; Patcas, Raphael; Signorelli, Luca; Mueller, Lukas; Kau, Thomas; Watzal, Helmut; Kellenberger, Christian J.; Ullrich, Oliver; Luder, Hans-Ulrich

2012-01-01

To determine the best suited sagittal MRI sequence out of a standard temporo-mandibular joint (TMJ) imaging protocol for the assessment of the cortical bone of the mandibular condyles of cadaveric specimens using micro-CT as the standard of reference. Sixteen TMJs in 8 human cadaveric heads (mean age, 81 years) were examined by MRI. Upon all sagittal sequences, two observers measured the cortical bone thickness (CBT) of the anterior, superior and posterior portions of the mandibular condyles (i.e. objective analysis), and assessed for the presence of cortical bone thinning, erosions or surface irregularities as well as subcortical bone cysts and anterior osteophytes (i.e. subjective analysis). Micro-CT of the condyles was performed to serve as the standard of reference for statistical analysis. Inter-observer agreements for objective (r = 0.83-0.99, P < 0.01) and subjective (κ = 0.67-0.88) analyses were very good. Mean CBT measurements were most accurate, and cortical bone thinning, erosions, surface irregularities and subcortical bone cysts were best depicted on the 3D fast spoiled gradient echo recalled sequence (3D FSPGR). The most reliable MRI sequence to assess the cortical bone of the mandibular condyles on sagittal imaging planes is the 3D FSPGR sequence. (orig.)

MRI of the temporo-mandibular joint: which sequence is best suited to assess the cortical bone of the mandibular condyle? A cadaveric study using micro-CT as the standard of reference

Energy Technology Data Exchange (ETDEWEB)

Karlo, Christoph A. [University Hospital Zurich, Department of Diagnostic and Interventional Radiology, Zurich (Switzerland); University Children' s Hospital Zurich, Department of Diagnostic Imaging, Zurich (Switzerland); Patcas, Raphael; Signorelli, Luca; Mueller, Lukas [University of Zurich, Clinic for Orthodontics and Pediatric Dentistry, Center of Dental Medicine, Zurich (Switzerland); Kau, Thomas; Watzal, Helmut; Kellenberger, Christian J. [University Children' s Hospital Zurich, Department of Diagnostic Imaging, Zurich (Switzerland); Ullrich, Oliver [University of Zurich, Institute of Anatomy, Faculty of Medicine, Zurich (Switzerland); Luder, Hans-Ulrich [University of Zurich, Section of Orofacial Structures and Development, Center of Dental Medicine, Zurich (Switzerland)

2012-07-15

To determine the best suited sagittal MRI sequence out of a standard temporo-mandibular joint (TMJ) imaging protocol for the assessment of the cortical bone of the mandibular condyles of cadaveric specimens using micro-CT as the standard of reference. Sixteen TMJs in 8 human cadaveric heads (mean age, 81 years) were examined by MRI. Upon all sagittal sequences, two observers measured the cortical bone thickness (CBT) of the anterior, superior and posterior portions of the mandibular condyles (i.e. objective analysis), and assessed for the presence of cortical bone thinning, erosions or surface irregularities as well as subcortical bone cysts and anterior osteophytes (i.e. subjective analysis). Micro-CT of the condyles was performed to serve as the standard of reference for statistical analysis. Inter-observer agreements for objective (r = 0.83-0.99, P < 0.01) and subjective ({kappa} = 0.67-0.88) analyses were very good. Mean CBT measurements were most accurate, and cortical bone thinning, erosions, surface irregularities and subcortical bone cysts were best depicted on the 3D fast spoiled gradient echo recalled sequence (3D FSPGR). The most reliable MRI sequence to assess the cortical bone of the mandibular condyles on sagittal imaging planes is the 3D FSPGR sequence. (orig.)

[Temporo-mandibular joint. Morpho-functional considerations].

Science.gov (United States)

Scutariu, M D; Indrei, Anca

2004-01-01

The temporo-mandibular joint is distinguished from most other synovial joints of the body by two features: 1. the two jointed components carry teeth whose position and occlusion introduce a very strong influence on the movements of the temporo-mandibular joint and 2. its articular surfaces are not covered by hyaline cartilage, but by a dense, fibrous tissue. This paper describes the parts of the temporo-mandibular joint: the articular surfaces (the condylar process of the mandible and the glenoid part of the temporal bone), the fibrocartilaginous disc which is interposed between the mandibular and the temporal surface, the fibrous capsule of the temporo-mandibular joint and the ligaments of this joint. All these parts present a very strong adaptation at the important functions of the temporo-mandibular joint.

A study of the mandibular canal in digital panoramic radiographic images of a selected Korean population

International Nuclear Information System (INIS)

Kim, Jae Duk; Kim, Jin Soo

2007-01-01

To determine the more valuable information to detect the mandibular canal and the mental foramen in panoramic radiographs of a selected Korean population for the implant. This study analysed 288 panoramic radiographic images of patients taken at the Dental hospital of Chosun University retrospectively. Indirect digital panoramic X-ray machine (ProlineXC, PLANMECA, Finland) with processing by using Directview CR950 (Kodak, U.S.A.) and Direct digital panoramic X-ray machine (Promax, PLANMECA, Finland) were used for all exposures. All images were converted into Dicom format. The common position of the mental foramen was in line with the longitudinal axis of the second premolar (68.1%). The mental foramen was lower symmetrical in 81.8% of cases. The mandibular canal was not identified at anterior portion and discontinued with the mental foramen in 27.8% of all cases, in 42.4% identified with lower border line continued with the mental foramen, in 14.6% with both upper and lower border lines, and in 15.3% unilaterally identified with lower border line. Clinicians can estimate the upper border line of the mandibular canal from the confirmation of the mental foramen and the lower border line of the mandibular canal symmetrically on the panoramic radiography taken in adjusted midsaggital plane of patient's head

Anterior semicircular canal benign paroxysmal positional vertigo and positional downbeating nystagmus.

Science.gov (United States)

Lopez-Escamez, Jose A; Molina, Maria I; Gamiz, Maria J

2006-01-01

The aim of this study was to describe the clinical features and video-oculographic findings in patients with anterior semicircular canal benign paroxysmal positional vertigo (BPPV). This is a prospective case series. The study was set at an outpatient clinic in a general hospital. Fourteen individuals with symptoms of BPPV and positional downbeating nystagmus (pDBN) were included in the study. The diagnosis was based on a history of brief episodes of vertigo and the presence of pDBN confirmed in the video-oculographic examination during Dix-Hallpike test (DH) or head-hanging maneuver. Patients were treated by particle repositioning maneuver and the effectiveness was evaluated at 7, 30, and 180 days posttreatment. The treatment was repeated up to 4 times if pDBN was persistent. The main outcome measure is the number of patients without pDBN at 30 and 180 days. Video-oculography showed a predominant pDBN in response to DH. Of the 14 patients, 7 had arterial hypertension, and 5 of 14 cases presented abnormalities on the caloric test. Horizontal spontaneous nystagmus was found in 3 of 14 individuals. Positional nystagmus at different positional test was observed in 5 of 14 individuals, suggesting the involvement of several canals. Of the 14 patients, 10 (71%) did not present vertigo, and the positional tests were negative at 30 days. However, 3 cases presented a positive DH with persistence of BPPV episodes and pDBN at 30 days, and another developed a contralateral posterior canal affectation. One of the patients maintained a persistent pDBN at 180 days despite the repeated maneuvers. Video-oculography demonstrates that anterior canal BPPV is characterized by a predominant downbeating nystagmus in response to DH. These individuals may show alterations in the vestibular caloric, and they can have multicanal affectation.

Mandibular growth changes and cervical vertebral maturation. a cephalometric implant study.

Science.gov (United States)

Gu, Yan; McNamara, James A

2007-11-01

To evaluate mandibular dimensional changes and regional remodeling occurring during five intervals of circumpubertal growth. This investigation evaluated a unique sample of subjects in whom tantalum implants were placed into the craniofacial complex during childhood. The sample was obtained from the Mathews and Ware implant study originally conducted at the University of California San Francisco in the 1970s, with longitudinal cephalometric records of 20 subjects (13 female, 7 male) available for evaluation. Cephalograms at six consecutive stages of cervical vertebral maturation (CS1 through CS6) were analyzed. Peak mandibular growth was noted during the interval from CS3 to CS4. Forward rotation of the mandible was due to greater mandibular growth posteriorly than anteriorly. Progressive closure of the condylar-ramus-occlusal (CRO) angle resulted in a forward and upward orientation of the ramus relative to the corpus of the mandible due to increased vertical growth of the condyle. A peak in mandibular growth at puberty was substantiated. Mandibular remodeling and condylar rotation continue to occur after the growth spurt.

Sexual dimorphism of the internal mandibular chamber in Fayum Pliohyracidae (Mammalia)

Science.gov (United States)

de Blieux, D.D.; Baumrind, M.R.; Simons, E.L.; Chatrath, P.S.; Meyer, G.E.; Attia, Y.S.

2006-01-01

An internal mandibular fenestra and chamber are found in many fossil hyracoids. The internal mandibular fenestra is located on the lingual surface of the mandibular corpus and opens into a chamber within the mandible. The mandibular chamber is maximally developed in late Eocene Thyrohyrax meyeri and early Oligocene Thyrohyrax domorictus from the Fayum Province of Egypt. The function of this chamber is unknown as it is not found in extant hyraxes, nor is it known to occur in any other mammal. In Thyrohyrax, this feature appears to be sexually dimorphic because it is confined to roughly one half of the specimens that otherwise cannot be separated by dental characteristics or measurements. It has been suggested that the chamber is found in females based on the presumed distribution of this character in other fossil hyracoids. Fossils from Fayum Quarry L-41, preserving the sexually dimorphic anterior dentition, show that, in Thyrohyrax meyeri and Thyrohyrax domorictus, the internal mandibular chamber is found in males. In Thyrohyrax litholagus, an internal mandibular fenestra and inflated mandibular chamber occurs in males whereas females show the variable presence of an internal mandibular fossa or fenestra but lack an expanded chamber. Other genera show differing patterns of sexual variation in which some Fayum hyracoids have an internal mandibular fenestra in both sexes but with the greatest development of the mandibular chamber occurring in males. We review functions proposed for the internal mandibular chamber and suggest that it housed a laryngeal air sac that may have had a vocal function by acting as a resonating chamber. ?? 2006 by the Society of Vertebrate Paleontology.

Trunk position modulates anterior cruciate ligament forces and strains during a single-leg squat

NARCIS (Netherlands)

Kulas, Anthony S.; Hortobagyi, Tibor; DeVita, Paul

Background: Although the squat exercise and its variations are commonly prescribed for anterior cruciate ligament rehabilitation, whether trunk position affects these ligament forces and strains during the squat is unclear. Our purpose was to evaluate the effects of trunk position on anterior

Using the T-scan III system to analyze occlusal function in mandibular reconstruction patients: A pilot study

Directory of Open Access Journals (Sweden)

Chao-Wei Liu

2015-02-01

Full Text Available Background: This study was designed to analyze the post-rehabilitation occlusal function of subjects treated with complex mandibular resection and subsequently rehabilitated with fibula osteoseptocutaneous flaps, dental implants, and fixed prostheses utilizing the T-scan system. Methods: Ten mandibular complex resection cases that adopted fibula osteoseptocutaneous flaps, dental implants, and fixed prostheses to reconstruct occlusal function were analyzed. The mandibular reconstructions were divided into three groups based on size: full mandibular reconstructions, mandibular reconstructions larger than half of the arch, and mandibular reconstructions smaller than half of the arch. The T-scan III system was used to measure maximum occlusal force, occlusal time, anterior-posterior as well as left-right occlusal force asymmetries, and anterior-posterior as well as left-right asymmetrical locations of occlusal centers. Results: Subjects with larger mandibular reconstructions and dental implants with fixed partial dentures demonstrated decreased average occlusal force; however, the difference did not reach the statistically significant level (p > 0.05. The most significant asymmetry of occlusal center location occurred among subjects with mandibular reconstructed areas larger than half of the mandibular arch. Conclusions: Comparison of the parameters of T-scan system used to analyze the occlusal function showed that the occlusal force was not an objective reference. Measurements of the location of the occlusal center appeared more repeatable, and were less affected by additional factors. The research results of this study showed that the size of a reconstruction did not affect the occlusal force after reconstruction and larger reconstructed areas did not decrease the average occlusal force. The most significant parameter was left and right asymmetry of the occlusion center (LROC and was measured in subjects with reconstruction areas larger than half

The effect of inter-implant distance on retention and resistance to dislodging forces for mandibular implant-tissue-supported overdentures.

Directory of Open Access Journals (Sweden)

Farhad Tabatabaian

2014-10-01

Full Text Available The effect of inter-implant distance on retention and resistance of implant-tissue-supported overdentures is lacking in the literature. An in vitro study was performed to evaluate this effect for mandibular implant-tissue-supported overdentures retained by two ball attachments.An acrylic cast of an edentulous mandible was fabricated. Three pairs of implants were symmetrically placed at both sides of the midline. The inter-implant distance was 10, 25, and 35 millimeters in positions A, B and C, respectively. A framework simulating the overdenture was fabricated on the cast. Six attachment housings were placed within the overdenture. For each sample, two ball abutments were screwed onto the implant pairs and two pink nylon inserts were seated in their respective attachment housings. The samples were tested in three groups of 15 (A, B, and C. The testing machine applied tensile dislodging forces and peak loads were measured in three directions: vertical, oblique, and anterior-posterior. A one-way ANOVA followed by Tukey's HSD was used to determine groups that were significantly different. Tests were carried out at 0.05 level of significance.Peak loads for the anterior-posteriorly directed dislodging forces were significantly the highest for group C (P0.05.Inter-implant distance did not affect the vertical retention and oblique resistance of mandibular implant-tissue-supported overdentures; however, it affected anterior-posterior resistance.

Glycosaminoglycan synthesis in the mandibular condyle during growth adaptation.

Science.gov (United States)

Kantomaa, T; Pirttiniemi, P; Tuominen, M; Poikela, A

1994-01-01

Condylar growth was studied after an operation simulating functional orthodontic appliances. Twenty-five rabbits underwent a surgical operation for the induction of premature synostosis to displace the glenoid fossa posteriorly during growth. Twenty-five control rabbits underwent sham operations. At the age of 15 days, 10 experimental and 10 control animals and, at the age of 20 days, 5 experimental and 5 control animals were killed. Their mandibular condyles were organ-cultured for 3 h in the presence of radiolabelled sulphur. The condyles were used for autoradiographic purposes. Digital image analysis of autoradiograms of histological sections showed synthesis of glycosaminoglycans to have increased from the anterior to the posterior direction. This increase was more marked in experimental animals than in the condyles of control animals. Ten experimental and 10 control animals were killed at the age of 15 days, and mandibular condyles were organ-cultured for 1, 4 and 7 days. Differentiation of proliferating prechondroblasts into hypertrophied chondrocytes continued under organ culture conditions. A marked decrease in the proliferating cell layer was noticed, especially in control condyles. Hypertrophy was faster and came closer to the surface of the condyle in the anterior region of the condyle. This was most marked in the condyles of experimental animals. The results indicate that a procedure carried out on the glenoid fossa with the same effect as functional appliances increases the synthesis of extracellular matrix in the posterosuperior region of the mandibular condyle.

Skeletal class III camouflage by mandibular incisor extraction: A case report

Directory of Open Access Journals (Sweden)

Janardhanan Kumaresan

2014-01-01

Full Text Available Treatment planning in orthodontics plays a key role in determining the successful treatment of any kind of malocclusion. Skeletal class III malocclusions are generally difficult to treat because of the complex nature of the skeletal and dental manifestations they produce. Mild to moderate skeletal class III malocclusions sometimes have an acceptable facial profile where orthodontic camouflage is possible. In this case report, camouflage of a mild skeletal class III is done by the extraction of a single mandibular incisor, which helped in maintaining the profile of the patient and also in the correction of crowding in the mandibular anterior region.

MANAGEMENT OF TEMPORO MANDIBULAR DISORDER (TMD IN PATIENT WITH LOW VERTICAL DIMENSION AND DEEP ANTERIOR BITE

Directory of Open Access Journals (Sweden)

Henni Koesmaningati

2015-06-01

Full Text Available The cases of TMD are complex and multifactorial, therefore the management should be done by several disciplines. In this report, a 27-year-old man came to the teaching hospital of the University of Indonesia Faculty of Dentistry’s Prosthodontic Department complaining about clicking sound and pain around his right joint. He received orthodontic treatment 9 years ago with removable appliance at a private practice and had 4 premolar extractions. The patient’s face looked asymmetric, with a low vertical dimension, a Class II occlusion, and an anterior deep bite. Besides that, he clenched his teeth during emotional stress. Lateral transcranial photo showed that the position of the left condyle was relatively normal or slightly anterior, and the right condyle was in the superoposterior position in the fossa with an abnormal shape. To solve this problem, the patient was referred to the Orthodontic Department to get a correct vertical dimension and normal anterior overbite. After 6 years, the patient was again referred to the Prosthodontic Department, but the result was not successful. In order to get the right vertical dimension, an occlusal splint was fabricated to achieve a comfort jaw relation. In this position, the overbite was 2 mm, but the space between the upper and lower posterior teeth was 5 mm. In this situation, full veneer crowns were not impossible to fabricate. Finally, to maintain this comfort position, the patient was suggested to wear the occlusal splint and come regularly for control every 6 months.

Impacted mandibular third molars and their influence on mandibular angle and condyle fractures--a retrospective study.

Science.gov (United States)

Gaddipati, Rajasekhar; Ramisetty, Sudhir; Vura, Nandagopal; Kanduri, Rajeev Reddy; Gunda, Vinay Kumar

2014-10-01

Previous retrospective analyses prove that impacted mandibular third molars (M3s) increase the risk of angle fractures and decrease the risk of concomitant fractures to the condyle. A retrospective cohort was designed for patients reported to the Department of Oral and Maxillofacial Surgery from January 2011 till June 2013. The study variables are presence or absence of third molar, if it is present, their position, classified using the Pell and Gregory system; angulation, classified using Shiller's method. The outcome variables were angle and condyle fractures. Hospital records and panoramic radiographs were used to determine and classify these variables. The study sample comprised of 118 mandibular angle and condyle fractures in 110 patients. Database was constructed and analysed using SPSS version 10.0. This present retrospective study concluded that the presence of impacted third molar predisposes the angle to fracture and reduces the risk of a concomitant condylar fracture. However absence of impacted third molar increases the risk of condylar fracture. The highest incidence of angle fracture was observed in position A impacted mandibular third molars. And there is no significant relationship, concerning ramus position and angulation of impacted mandibular third molars with the angle fracture. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

SECOND MOLAR UPRIGHTING AFTER PREMATURE LOSS OF MANDIBULAR FIRST PERMANENT MOLAR--CASE REPORT.

Science.gov (United States)

Cernei, E R; Mavru, R B; Zetui, Irina Nicoleta

2015-01-01

Uprighting a tipped molar by using an uprighting spring is a fundamental orthodontic treatment technique. Following a weak anchorage done only by the anterior teeth the permanent lower second molar will rotate around its center of resistance, and besides the distalizing movement will occur its extrusion. Following the reaction, the mandibular anterior teeth will have a movement of intrusion. All these elements will lead to anterior open bite. Correction of vertical problems has become easier with the advent of mini-implants. U.I patient aged 24 years presenting for aesthetic and functional disorders. Clinical examination reveals intraoral Class I molar malocclusion on the right sight, upper narrowing arch with a slight overbite, and the both permanent first molars on the left side lost prematurely. The tooth 37 is inclined at 600 degrees to the plane of occlusion. To avoid front opening occlusion we used an orthodontic miniscrew inserted between the canine and the first premolar on the same side to achieve the second molar up righting. Lower second molar uprighting was achieved without unwanted movements in anterior mandibular region and without molar extrusion. Using mini implants in uprighting a tipped molar will achieve the desired tooth movement and will reduce the number of unwanted side effects and eventually to improve patient's esthetics.

Temporalis and masseter muscle activity in patients with anterior open bite and craniomandibular disorders

DEFF Research Database (Denmark)

Bakke, Merete; Michler, L

1991-01-01

values, particularly in subjects with muscular affection, but maximal activity increased significantly when biting on the splint. Maximal voluntary contraction was positively correlated to molar contact and negatively to anterior face height, mandibular inclination, vertical jaw relation and gonial angle......Activity in temporalis and masseter muscles, and traits of facial morphology and occlusal stability were studied in 22 patients (19 women, 3 men; 15-45 yr of age) with anterior open bite and symptoms and signs of craniomandibular disorders. Facial morphology was assessed by profile radiographs......, occlusal stability by tooth contacts, and craniomandibular function by clinical and radiological examination. Electromyographic activity was recorded by surface electrodes after primary treatment with a reflex-releasing, stabilizing splint. Maximal voluntary contraction was reduced compared to reference...

Evaluation of Pound concept in determination of mediolateral mandibular posterior teeth position

Directory of Open Access Journals (Sweden)

Majid Naser Khaki

2017-03-01

Full Text Available Background: The ideal teeth arrangement is an important step for success in complete denture fabrication. There are different methods for determining the posterior denture teeth location. The purpose of this study was the comparison of posterior mandibular teeth location in the study group with Pound or Misch theory. Material and methods: An alginate mandibular impression of 80 dentate patients was taken and poured with dental stone. Retromolar pad area, mesial of canine and the lingual cusps of each posterior tooth marked on the cast and then transferred to the graded paper. Distance of each lingual cusp from the internal line of Pound triangle was measured. Data were analyzed with SPSS version 16.0. Result: In the study group, the average distance of lingual mandibular cusp from the internal line of Pound triangle was 1.69 mm in first premolars, 0.94 mm in second premolars, 0.7 mm in first molars and 0.75 mm in second molars. Conclusion: In most cases, distance of lingual mandibular cusps was within 1 mm of Pound triangle. Results were more similar to the Pound rather than the Misch theory.

MRI of the temporo-mandibular joint: which sequence is best suited to assess the cortical bone of the mandibular condyle? A cadaveric study using micro-CT as the standard of reference.

Science.gov (United States)

Karlo, Christoph A; Patcas, Raphael; Kau, Thomas; Watzal, Helmut; Signorelli, Luca; Müller, Lukas; Ullrich, Oliver; Luder, Hans-Ulrich; Kellenberger, Christian J

2012-07-01

To determine the best suited sagittal MRI sequence out of a standard temporo-mandibular joint (TMJ) imaging protocol for the assessment of the cortical bone of the mandibular condyles of cadaveric specimens using micro-CT as the standard of reference. Sixteen TMJs in 8 human cadaveric heads (mean age, 81 years) were examined by MRI. Upon all sagittal sequences, two observers measured the cortical bone thickness (CBT) of the anterior, superior and posterior portions of the mandibular condyles (i.e. objective analysis), and assessed for the presence of cortical bone thinning, erosions or surface irregularities as well as subcortical bone cysts and anterior osteophytes (i.e. subjective analysis). Micro-CT of the condyles was performed to serve as the standard of reference for statistical analysis. Inter-observer agreements for objective (r = 0.83-0.99, P < 0.01) and subjective (κ = 0.67-0.88) analyses were very good. Mean CBT measurements were most accurate, and cortical bone thinning, erosions, surface irregularities and subcortical bone cysts were best depicted on the 3D fast spoiled gradient echo recalled sequence (3D FSPGR). The most reliable MRI sequence to assess the cortical bone of the mandibular condyles on sagittal imaging planes is the 3D FSPGR sequence. MRI may be used to assess the cortical bone of the TMJ. • Depiction of cortical bone is best on 3D FSPGR sequences. • MRI can assess treatment response in patients with TMJ abnormalities.

Probabilidad de retención de segundos molares permanentes mandibulares (Estudio piloto

Directory of Open Access Journals (Sweden)

Paulo Sandoval Vidal

Full Text Available Objetivos: Determinar la frecuencia del segundo molar mandibular permanente (MM2 con probabilidad de impactación, en un grupo de pacientes de Ortodoncia de Temuco, Chile. Método: Estudio de corte transversal, con muestra por conveniencia. Se revisaron 2095 fichas de individuos de ambos sexos, con ausencia de patología sindrómica. Los datos recolectados se obtuvieron de radiografías panorámicas. Se midió el ángulo del segundo molar con respecto al plano oclusal, la invasión distal del primer molar y la distancia entre distal del primer molar y el borde anterior de la rama mandibular. Resultados: El promedio de edad de los pacientes relevados fue de 10 años. Se observó un 1,43% de probabilidad de retención de MM2 (n=30; en promedio y el plano el ángulo MM2 resultó de 27° el izquierdo y 26° el derecho; la invasión de MM2 en distal del primer molar resultó de 1,5 mm; el ángulo entre MM2 y el planos oclusal es de 123°; la distancia entre la cara distal del primer molar y el borde anterior de la rama mandibular fue 13 mm. Conclusiones: Existe una baja prevalencia de segundos molares mandibulares permanentes con probabilidad de impactación. La invasión a la cara distal del primer molar fue mayor en pacientes con riesgo de impactación

Hybrid approach to fabrication of hollow internally weighted mandibular denture: A case report.

Science.gov (United States)

Hazari, Puja; Mishra, Sunil Kumar

2015-08-01

Preservation of ridge dimensions is critical for denture success. For long the concept of an internally weighted denture, which suggested that gravity and the additional weight to the mandibular complete denture aids in prosthetic retention is widely accepted. However, excessive weight and pressure can accelerate bone resorption. Here, we describe a unique modification of internally weighted metal denture base for the resorbed mandibular ridge with an incorporated additional hollow section over the anterior knife-edge ridge. The weight provided retention and stability while the hollow portion prevented further resorption of the bone.

Digital radiographic evaluation of alveolar bone loss, density and lamina dura integrity on post splinting mandibular anterior with chronic periodontitis

Science.gov (United States)

Rafini, F.; Priaminiarti, M.; Sukardi, I.; Lessang, R.

2017-08-01

The healing of periodontal splinting can be detected both with clinical and radiographic examination. In this study, the alveolar bone was evaluated by radiographic digital periapical analysis. Periodontal tooth splinting is periodontal support therapy used to prevent periodontal injury during repair and regeneration of periodontal therapy. Radiographic digital periapical analysis of alveolar bone in the mandibular anterior region with chronic periodontitis and 2/3 cervical bone loss after three months of periodontal splinting. Eighty four proximal site (43 mesial and 41 distal) from 16 patients with chronic periodontitis and treated with spinting were examined by taking periapical digital radiographic at day 1 and 91. The bone loss, bone density and utility of lamina dura were evaluated. The statistical analysis after three months evaluation using T-test for bone loss, Wilcoxon sign rank test for bone density and utility lamina dura showed no significantly differences (pchronic periodontitis with 2/3 alveolar bone loss after three months splinting.

[Orthodontic treatment of Class III patients with mandibular asymmetry].

Science.gov (United States)

Duan, Yin-Zhong; Huo, Na; Chen, Lei; Chen, Xue-Peng; Lin, Yang

2008-12-01

To investigate the treatment outcome of Class III patients with dental, functional and mild skeletal mandibular asymmetry. Thirty-five patients (14 males and 21 females) with dental, functional and mild skeletal mandibular asymmetry were selected. The age range of the patients was 7 - 22 years with a mean age of 16.5 years. Dental mandibular asymmetry was treated with expansion of maxillary arch to help the mandible returning to normal position. Functional mandibular asymmetry was treated with activator or asymmetrical protraction and Class III elastics. Mild skeletal mandibular asymmetry was treated with camouflage treatment. Good occlusal relationships were achieved and facial esthetics was greatly improved after orthodontic treatment in patients with dental and functional mandibular asymmetry. However, patients with skeletal mandibular asymmetry should be treated with both extraction and genioplasty. Orthodontic treatment was suitable for patients with dental and functional mandibular asymmetry, while combined orthodontics and surgery could get good results in patients with skeletal mandibular asymmetry.

Theoretical role of adjunctive implant positional support in stress distribution of distal-extension mandibular removable partial dentures.

Science.gov (United States)

Xiao, Wei; Li, Zhiyong; Shen, Shiqian; Chen, Shaowu; Wang, Yining; Wang, Jiawei

2014-01-01

This preliminary study evaluated the adjunctive supporting role of diverse implant positions on stress distribution in a Class I removable partial denture (RPD) design. Nine three-dimensional finite element models were prepared to simulate mandibular RPD designs with three different loading conditions applied. Implant supported designs demonstrated lower stress value concentrations and mucosal displacement.

A comparative study of mandibular movements with their MR images in patients with internal derangement of the TMJ

International Nuclear Information System (INIS)

Miyamoto, Satoshi; Ogawa, Takumi; Hosoda, Yutaka

1993-01-01

Thirty one patients with internal derangement of the TMJ and 12 subjects with normal TMJ were selected and their MR imaging and border movements of the mandible were recorded. In addition, the relationship between them were examined. In this study, the disk position and configuration in MR findings were classified as follows. Disk position: superior, anterior and anterolateral (medial and lateral were omitted), grade of anterior disk displacement (with and without reduction): slight, moderate and severe, disk configuration: biconcave, enlargement of posterior band, even thickness and biconvex. Border movements of the mandible were influenced not only by unilateral or bilateral interior derangement but also by with or without reduction of the disk. Border movements in patients with anterolateral disk displacement were more severely restricted than those with anterior disk displacement. Border movements were remarkably limited in patients with slight disk displacement, especially in unilateral cases with reduction of the disk. Border movements in patients with even thickness and biconvex types of disk configuration were a little restricted and rather similar to those of normal subjects. There was significant correlation between border movements and disk position and configuration. It means that measurement of the mandibular movements is very significant to diagnose the condition of internal derangements of the TMJ. (author)

Computer-assisted preoperative simulation for positioning and fixation of plate in 2-stage procedure combining maxillary advancement by distraction technique and mandibular setback surgery.

Science.gov (United States)

Suenaga, Hideyuki; Taniguchi, Asako; Yonenaga, Kazumichi; Hoshi, Kazuto; Takato, Tsuyoshi

2016-01-01

Computer-assisted preoperative simulation surgery is employed to plan and interact with the 3D images during the orthognathic procedure. It is useful for positioning and fixation of maxilla by a plate. We report a case of maxillary retrusion by a bilateral cleft lip and palate, in which a 2-stage orthognathic procedure (maxillary advancement by distraction technique and mandibular setback surgery) was performed following a computer-assisted preoperative simulation planning to achieve the positioning and fixation of the plate. A high accuracy was achieved in the present case. A 21-year-old male patient presented to our department with a complaint of maxillary retrusion following bilateral cleft lip and palate. Computer-assisted preoperative simulation with 2-stage orthognathic procedure using distraction technique and mandibular setback surgery was planned. The preoperative planning of the procedure resulted in good aesthetic outcomes. The error of the maxillary position was less than 1mm. The implementation of the computer-assisted preoperative simulation for the positioning and fixation of plate in 2-stage orthognathic procedure using distraction technique and mandibular setback surgery yielded good results. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Predicting pathology in impacted mandibular third molars

Directory of Open Access Journals (Sweden)

Aveek Mukherji

2017-01-01

Full Text Available Introduction: The rising incidence of the impacted mandibular third molars and their association with pathologies is now considered a public health problem. Aims and Objectives: The objective of this study was to assess the position of impacted mandibular third molars that are prone to developing pathologies and to determine the frequency and type of pathological conditions associated with these impacted teeth to facilitate planning for their prophylactic removal. Materials and Methods: Consecutive panoramic radiographs and clinical examination of 300 patients with impacted mandibular third molars were collected. They were segregated according to Pell and Gregory’s classification, Winter’s classification, and according to their state of eruption. These were correlated with associated pathologies based on clinical and radiological criteria. Statistical Analysis Used: Descriptive statistics included computation of percentages, mean, and standard deviations. The statistical test applied for the analysis was Pearson’s Chi-square test (χ2. For this test, confidence interval and P value were set at 93% and ≤0.03, respectively. Results: The pathology most commonly associated with impacted third molars was pericoronitis, which had the highest frequency of occurrence in partially erupted, distoangular, and IA positioned (as per Pell and Gregory classification impacted teeth. Impacted mandibular third molars, which were in IA position, placed mesially, and partially erupted, were prone to develop pathologies such as dental caries and periodontitis. Conclusion: The clinical and radiographical features of impacted third molar may be correlated to the development of their pathological complications. The partially impacted mandibular third molars with mesioangularly aligned in IA position have the highest potential to cause pathological complications.

Influence of mandibular fixation method on stability of the maxillary occlusal plane after occlusal plane alteration.

Science.gov (United States)

Yosano, Akira; Katakura, Akira; Takaki, Takashi; Shibahara, Takahiko

2009-05-01

In this study, we investigated how method of mandibular fixation influenced longterm postoperative stability of the maxilla in Class III cases. In particular, we investigated change in the maxillary occlusal plane after Occlusal Plane Alteration. Therefore, we focused on change in the palatal plane to evaluate stability of the maxillary occlusal plane, as the position of the palatal plane affects the maxillary occlusal plane. This study included 16 patients diagnosed with mandibular protrusion. Alteration of the occlusal plane was achieved by clockwise rotation of the maxilla by Le Fort I osteotomy and mandibular setback was performed by bilateral sagittal split ramus osteotomy. We analyzed and examined lateral cephalometric radiographs taken at 1 month, 3 months, 6 months, and 1 year after surgery. Stability achieved by two methods of mandibular fixation was compared. In one group of patients (group S) titanium screws were used, and in the other group (group P) titanium-locking mini-plates were used. No significant displacement was recognized in group S, whereas an approximately 0.7mm upward vertical displacement was recognized in the anterior nasal spine in group P. As a result, not only the angle of the palatal plane and S-N plane, but also occlusal plane angle in group P showed a greater decrease than that in group S. The results suggest that fixing the mandible with screws yielded greater stability of the maxilla and maxillary occlusal plane than fixing the mandible with titanium plates.

[Benign paroxysmal positional vertigo of the anterior semicircular canal: clinical aspects and treatment].

Science.gov (United States)

Lorin, P

2005-01-01

To describe the videonystagmographic characteristics and the treatment of the patients reached with a canalolithiasis or a cupulolithiasis of the anterior semicircular canal. Retrospective study concerning patients treated for a Benign Paroxysmal Positional Vertigo (BPPV) of the anterior semicircular canal. Each patient after analysis under videonystagmoscopy (VNS) and under videonystagmography (VNG) was treated by maneuvers. On 462 observations of typical BPPV 6 cases of VPPB of the anterior semicircular canal were treated concerning 5 patients (1.3%). The BPPV of the anterior semicircular canal are rare. We modified our method of diagnosis, and our therapeutic techniques could be validated with the help of the two-dimensional videonystagmography.

Class III malocclusion treated with distalization of the mandibular dentition with miniscrew anchorage: A 2-year follow-up.

Science.gov (United States)

Chen, Kun; Cao, Yang

2015-12-01

This case report describes the orthodontic camouflage treatment for a 16-year-old Chinese girl with a Class III malocclusion. The treatment included extractions of the mandibular second molars, fixed appliance therapy, and miniscrew-aided mandibular arch distalization. Pretreatment, posttreatment, and 2-year follow-up records are shown. The anterior negative overjet and the Class III molar and canine relationships were corrected. The patient's facial profile was greatly improved. The mandibular third molars erupted into the second molar spaces, with acceptable intercuspation with the maxillary dentition. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Surgical treatment of mandibular condyle fractures using the retromandibular anterior transparotid approach and a triangular-positioned double miniplate osteosynthesis technique: A clinical and radiological evaluation of 124 fractures.

Science.gov (United States)

Dalla Torre, Daniel; Burtscher, Doris; Widmann, Gerlig; Pichler, Albina; Rasse, Michael; Puelacher, Wolfgang

2015-07-01

Different modalities have been described regarding the treatment of mandibular condyle fractures. The most advantageous and safest one is still a topic of discussion. The present analysis describes the combination of a retromandibular, transparotideal approach combined to a triangular-positioned double-miniplate osteosynthesis, with a special regard for the patients' long term outcomes. Clinical data of 102 patients with 124 condyle fractures treated with the mentioned surgical procedure were evaluated. Functional parameters such as the maximal interincisal distance, deviations/deflections, facial nerve function, occlusion as well as complications regarding the parotid gland, osteosynthesis, and esthetics were evaluated 1 week, 2 weeks, 3 months, and 6 months postoperatively. The mean maximal interincisal distance ranged from 38 mm after 1 week to 45 mm after 6 months. Deviations/deflections were seen in 22.5% of the cases 1 week postoperatively and decreased to 2% at 6 months postoperatively. A temporary facial palsy was diagnosed in 3.9% during the first follow-up, whereas no impairment was recorded after 3 or 6 months. At the same time, no patient had occlusional disturbances or complications regarding the parotid gland or the osteosynthesis 6 months postoperatively. Direct fracture visualization and a stable three-dimensional fracture stabilization are the main advantages of the presented combination of a surgical approach and osteosynthesis technique. Additionally, the absence of long-term complications confirms the safety of the procedure. Therefore, it may be considered as a successful treatment option for mandibular condyle fractures. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Replacement of Missing Anterior Teeth in a Patient with Temporomandibular Disorder

Directory of Open Access Journals (Sweden)

Satheesh B. Haralur

2014-01-01

Full Text Available The loss of anterior teeth leads to extreme psychological trauma, along with functional and esthetic debilitations. Healthy anterior teeth play an important role of protecting the posterior teeth during excursive mandibular movement. Loss of anterior teeth induces posterior interference with extended disocclusion time. Posterior disocclusion is critical to remove the harmful force on the teeth temporomandibular joint and eliminate muscle hypertonicity. Occlusal interference is considered as contributing factor to temporomandibular disorder (TMD symptoms. Prosthesis design should eliminate deleterious tooth contacts. Establishing optimum anterior guidance is a key to establishing harmonious functional occlusion in addition to the correction of the esthetic and phonetic disabilities. This case report explains the steps involved in the rehabilitation of the TMD patient with loss of maxillary anterior teeth.

Differences between the chewing and non-chewing sides of the mandibular first molars and condyles in the closing phase during chewing in normal subjects.

Science.gov (United States)

Tomonari, Hiroshi; Kwon, Sangho; Kuninori, Takaharu; Miyawaki, Shouichi

2017-09-01

This study aimed to assess differences between the closing paths of the chewing and non-chewing sides of mandibular first molars and condyles during natural mastication, using standardized model food in healthy subjects. Thirty-two healthy young adults (age: 19-25 years; 22 men, 10 women) with normal occlusion and function chewed on standardized gummy jelly. Using an optoelectric jaw-tracking system with six degrees of freedom, we recorded the path of the mandibular first molars and condyles on both sides for 10 strokes during unilateral chewing. Variables were compared between the chewing side and the non-chewing side of first molars and condyles on frontal, sagittal, and horizontal views during the early-, middle- and late-closing phases. On superior/inferior displacements, the chewing side first molar and condyle were positioned superior to those on the non-chewing side during the early- and middle-closing phases. Conversely, the first molar and condyle on the non-chewing side were positioned significantly superior to those on the chewing side during the late-closing phase. On anterior/posterior displacements, the chewing side mandibular first molar and condyle were positioned significantly posterior to those on the non-chewing side throughout all closing phases. Our results showed the differences between the mandibular first molars and condyles on both sides with respect to masticatory path during natural chewing of a model food. These differences can be useful for informing initial diagnostic tests for impaired masticatory function in the clinical environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Prevalence and Length of the Anterior Loop of the Inferior Alveolar Nerve in Iranians.

Science.gov (United States)

Moghddam, Maryam Rastegar; Davoudmanesh, Zeinab; Azizi, Nasim; Rakhshan, Vahid; Shariati, Mahsa

2017-10-01

The anterior loop of the inferior alveolar nerve is a sensitive anatomical feature that should be taken into account during installation of dental implants anterior to the mental foramen. This study was conducted to explore the controversy regarding prevalence and length. A total of 452 mandible quadrants of 234 patients (age: 50.1 ± 13.3 years, 113 males, 121 females) were studied using cone-beam computerized tomography. After reconstructing axial, frontal, and sagittal slices, the region between the most anterior point on the mental foramen and the most anterior part of the mandibular nerve was inspected for signs of anterior loop presence. If positive, the length of the anterior loop was measured in mm as the distance between the anterior border of mental foramen and the anterior border of the loop. Prevalence and length of the anterior loop were compared statistically between sexes and age groups. The anterior loop was observed in 106 quadrants (23.5% of 451 quadrants) of 95 patients (40.6% of 234 patients), of whom 11 had bilateral anterior loops. Prevalences were similar in males (41%) and females (39%, chi-square P =.791). The mean anterior loop length was 2.77 ± 1.56 mm (95% CI: 2.5-3.1 mm), without significant sex (regression beta = -0.159, P = .134) or age (beta = -0.059, P = .578) differences. The anterior loop might exist in about 40% of patients, regardless of their gender. The mean safe anterior distance from the anterior loop is about 3 mm + (2.5-3.1 mm) = 5.5-6.1 mm, regardless of age.

Finite element analysis and clinical complications in mandibular implant-overdentures opposing maxillary dentures.

Science.gov (United States)

Khuder, Tameem; Yunus, Norsiah; Sulaiman, Eshamsul; Dabbagh, Ali

2017-11-01

Denture fracture is a common clinical complication caused by improper material selection, design, or fabrication technique. This study aimed to investigate the effect of two attachment systems on fracture risk of the implant-overdentures (IOD) via finite element analysis (FEA), using the force distributions obtained from patients' occlusal analyses and to compare the obtained results with the clinical complications associated with these attachments. A three-dimensional jaw model comprised of the edentulous bones was constructed. Three types of mandibular prostheses including complete denture (CD) (model LCD), IOD with Locator attachment (model LID-L), and IOD with telescopic attachment (model LID-T), as well as a maxillary CD (model UCD) were assembled. The vertical occlusal forces at anterior and posterior quadrants were obtained from the patients wearing mandibular CDs or IODs. The FEA results were further compared with the mechanical failures of different prostheses observed at patient recalls. In overall, the fracture risk of mandibular prostheses was lower than the maxillary compartments. The UCD opposing LCD underwent higher strains than that opposing LID-L and LID-T, which was mostly concentrated at the anterior mid-palatal polished surface. On the other hand, LID-L showed the lowest strain, followed by LID-T, and LCD. The obtained results were consistent with the clinical complications observed in the patient recalls. Copyright © 2017 Elsevier Ltd. All rights reserved.

Morphologic and Morphometric Analysis of Lingula in Localizing Mandibular Foramen with its Surgical Importance

Directory of Open Access Journals (Sweden)

Phalguni Srimani

2017-10-01

Full Text Available Introduction: Morphologic and morphometric evaluation of mandible is clinically important. Considering the close relationship of lingula with neurovascular structures entering through mandibular foramen, lingula is often used as an important bony landmark during oral and maxillofacial surgical approach and inferior alveolar nerve block anaesthesia. Inadequate anatomical knowledge may result various intra operative complications like haemorrhge, fractures and nerve injury. Also, structural variations of lingula followed by inaccurate localization of mandibular foramen have been implicated as causative factor for unsuccessful inferior alveolar nerve block anaesthesia. Aim: To determine morphological and morphometric variations related to lingula of mandible in localizing mandibular foramen and to compare the results with similar type of osteological studies performed earlier on different population group. Materials and Methods: The study was performed on 36 adult dry human mandibles on both sides to categorize lingula according to its various shapes and determine the location of lingula based on surrounding mandibular landmarks by using Vernier caliper as 5 distances from tip of lingula as follows: i to anterior border of ramus of mandible; ii to posterior border of ramus of mandible; iii to centre of mandibular notch; iv to the alveolar socket of second molar tooth; and v to the base of mandible. The present study also indicated bilingual distance between tips of lingula of both sides. Data collected were analyzed statistically. Results: The most common shape of lingula was observed as triangular (51.39% followed by truncated (23.61%, then nodular (20.83% and assimilated (4.17% as least prevalent type. The average distances of tip of lingula from anterior and posterior borders of ramus of mandible were 18.21±1.50 mm and 16.33±1.21 mm respectively. On average, the tip of lingula was situated at 18.17±1.51 mm, 33.40±2.11 mm and 32.07±2.68 mm

A correlational study of scoliosis and trunk balance in adult patients with mandibular deviation.

Directory of Open Access Journals (Sweden)

Shuncheng Zhou

Full Text Available Previous studies have confirmed that patients with mandibular deviation often have abnormal morphology of their cervical vertebrae. However, the relationship between mandibular deviation, scoliosis, and trunk balance has not been studied. Currently, mandibular deviation is usually treated as a single pathology, which leads to poor clinical efficiency. We investigated the relationship of spine coronal morphology and trunk balance in adult patients with mandibular deviation, and compared the finding to those in healthy volunteers. 35 adult patients with skeletal mandibular deviation and 10 healthy volunteers underwent anterior X-ray films of the head and posteroanterior X-ray films of the spine. Landmarks and lines were drawn and measured on these films. The axis distance method was used to measure the degree of scoliosis and the balance angle method was used to measure trunk balance. The relationship of mandibular deviation, spine coronal morphology and trunk balance was evaluated with the Pearson correlation method. The spine coronal morphology of patients with mandibular deviation demonstrated an "S" type curve, while a straight line parallel with the gravity line was found in the control group (significant difference, p1°, while the control group had a normal trunk balance (imbalance angle <1°. There was a significant difference between the two groups (p<0.01. The degree of scoliosis and shoulder imbalance correlated with the degree of mandibular deviation, and presented a linear trend. The direction of mandibular deviation was the same as that of the lateral bending of thoracolumbar vertebrae, which was opposite to the direction of lateral bending of cervical vertebrae. Our study shows the degree of mandibular deviation has a high correlation with the degree of scoliosis and trunk imbalance, all the three deformities should be clinically evaluated in the management of mandibular deviation.

Anterior lamina cribrosa surface position in idiopathic intracranial hypertension and glaucoma

DEFF Research Database (Denmark)

Villarruel, Jenni Martinez; Li, Xiao Q.; Bach-Holm, Daniella

2017-01-01

Purpose: To compare the anterior lamina cribrosa (LC) surface position in patients with idiopathic intracranial hypertension (IIH), primary open-angle glaucoma (high-tension glaucoma [HTG] and normal-tension glaucoma [NTG]), and healthy controls using enhanced depth imaging spectral-domain optical...

Morphological changes of the mandibular condyle in patients with temporomandibular joint disorder using magnetic resonance imaging

International Nuclear Information System (INIS)

Itoh, Shiori

1994-01-01

The morphological changes of the mandibular condyle in patients with temporomandibular joint disorder were studied. The subjects were 420 patients (103 males and 317 females, 8 to 80 years of age, mean age 39.8 years) who were clinically diagnosed as temporomandibular joint disorder. MR imaging was performed with a GE-Signa 1.5 Tesla MR imaging system using the body coil as a transmitter and 3-inch bilateral surface coils. The patients were examined by a multiplanar gradient echo technique in a closed-loop cine fashion on both sagittal and coronal planes. The results obtained were as follows: 1) Morphological changes of the mandibular condyle were detected in 47.0% of the patients. The predominant morphological changes were then formation of osteophyte and marginal proliferation (65.8%). 2) The incidence of morphological changes in the mandubular condyle did not show any significant difference between male and female, and tended to be higher in patients over 40 years of age, and the incidence in patients under 20 years of age was lower, compared to that in patients from 20 to 39 years of age. 3) The incidence of morphological changes in patients with anterior disk displacement without reduction was higher than in those with anterior disk displacement with reduction (P<0.001). The incidence of morphological changes in patients with rotational disk displacement was higher than in those with medial disk displacement (P<0.001). 4) The anterior translation of mandibular condyle was influenced more by anterior disk displacement rather than by morphological changes. From these results. it is suggested that simultaneous bilateral condyle pseudodynamic MR imaging was useful in the diagnosis of internal derangement, evaluation of morphological changes and assessment of motional abnormality of the condyle. (author)

Photoelastic analysis of bone deformation in the region of the mandibular condyle during mastication.

Science.gov (United States)

Meyer, Christophe; Kahn, Jean-Luc; Boutemi, Philippe; Wilk, Astrid

2002-06-01

The purpose of this experimental study was to demonstrate the stress patterns arising in the region of the mandibular condyle during mastication. Stress analysis was performed using reflection photoelasticity to demonstrate deformation occurring on the surface of the mandible. The rami of three fresh dentate human mandibles were coated with a shell of photoelastic resin. Using a novel loading device, these mandibles were then subjected to external forces (muscular traction, resultant mandibular forces and intra-articular reaction force) reproducing a unilateral biting task between the first right molars. Deformations were measured from the working side. The trace of isostatic lines from the isoclinic fringes revealed major differences in stress distributions between the three mandibles. These differences were attributed to differences in shape between the three mandibles. Conversely, we consistently found compressive stress patterns along the posterior border of the ramus and tensile stress patterns along the anterior border of the ramus and in the zone situated below the siqmoid notch. These findings suggest that during this particular task, the mandible is subjected to sagittal forces which tend to straighten the mandibular angle. This implies that new concepts are needed for the positioning of osteosynthesis plates in the condylar region, close to the tensile strain lines, as has been recommended also for other parts of the mandible when applying semi-rigid internal fixation. Copyright 2002 European Association for Cranio-Maxillofacial Surgery. Published by Elsevier Science Ltd.

Masticatory function and patient satisfaction with implant-supported mandibular overdentures: a prospective 5-year study

DEFF Research Database (Denmark)

Bakke, Merete; Holm, Betty; Gotfredsen, Klaus

2002-01-01

participated. They were in good health but had retention problems with their mandibular dentures. First, all patients received new dentures. After 3 months, two Astra Tech implants were placed in the anterior part of the mandible, and 6 months later the abutments were connected. Patient assessment...

Radiographic Localization of the Mental Foramen and Mandibular Canal

Directory of Open Access Journals (Sweden)

Farzaneh Afkhami

2013-01-01

Full Text Available Objective: Accurately localizing the mental foramen and mandibular canal is important when administering local anesthesia and performing surgery; therefore, knowing the normal range of the possible locations is essential. Our purpose was to assess the location of the mental foramen and mandibular canal in an Iranian population using panoramic radiography.Materials and Methods: Standard panoramic radiographies were performed. The positions of 100 mental foramens were evaluated. The distances from the center of the mental foramen to the superior and inferior borders of the mandible and to the apexes of the first and second premolar were measured. The distance of the mental foramens from the mandibular midline and the diameter of the mandibular canal in the mental foramen connection were also measured.Results: Among 100 mental foramens, 6% were positioned under the first premolar, 24% were between the first and second premolars, 67% were under the second premolar, and the remaining 3% were behind the second premolar. The mean distance from the mental foramen to the mandibular midline was 27.77±3.20 mm. The mean diameter of the mandibular canal in the mental foramen connection was 3.09±0.69mm.Conclusion: The mental foramen was near the second premolar and the inferior border of the mandible. This information can be used to perform safer mental nerve blocks in surgical interventions.

A Clinical and Cephalometric Study of the Influence of Mandibular Third Molars on Mandibular Anterior Teeth

Directory of Open Access Journals (Sweden)

Tara Ramprakash Kavra

2013-01-01

Various linear and angular measurements from true lateral cephalograms were compared to find the labial inclination of the lower anterior teeth and it was found that it was influenced by the presence of lower third molars.

Mandibular Symmetrical Bilateral Canine-Lateral Incisors Transposition: Its Early Diagnosis and Treatment Considerations.

Science.gov (United States)

Shapira, Yehoshua; Finkelstein, Tamar; Kadry, Rana; Schonberger, Shirley; Shpack, Nir

2016-01-01

Bilateral mandibular tooth transposition is a relatively rare dental anomaly caused by distal migration of the mandibular lateral incisors and can be detected in the early mixed dentition by radiographic examination. Early diagnosis and interceptive intervention may reduce the risk of possible transposition between the mandibular canine and lateral incisor. This report illustrates the orthodontic management of bilateral mandibular canine-lateral incisor transposition. Correct positioning of the affected teeth was achieved on the left side while teeth on the right side were aligned in their transposed position. It demonstrates the outcome of good alignment of the teeth in the dental arch.

[Stereomodel-assisted fibula free flap harvest and mandibular reconstruction: A technical note. Literature review of CAS and CAM applied to mandibular reconstruction.

Science.gov (United States)

Pauchot, J; Lachat, J; Floret, F; Badet, J-M; Tavernier, L; Aubry, S

2013-08-05

Mandibular reconstruction with fibula free flap harvest is currently the reference technique. Various preoperative processes have been developed to optimize this reconstruction. We report our experience with a simple, inexpensive, preoperative technique requiring a 3D printer, a device for maintaining mandibular reduction, a paper-cutting guide. Stereomodels of the mandible were obtained from computed tomography scan data and printed 3D in ABS. It allowed planning mandibular osteotomies, determine the angle between two bone fragments, and preoperatively modeling the osteosynthesis plate. A paper-cutting guide, and a simple device for maintaining mandibular reduction were also built. Two patients were operated on with this technique, with follow-up at 6 and 8 months. Reconstructions were successful with good clinical outcome in terms of mandibular contour and reconstructed segments positions. Preoperative planning of reconstruction may be used for mandibular osteotomies, fibular osteotomies, maintaining mandibular reduction, osteosynthesis, or placing implants for dental rehabilitation. The most complex procedures can virtually plan all these steps, but they are expensive and long to implement. Nevertheless, such procedures are quite expansive and require time not always compatible with carcinoma. Using a mandibular stereomodel is fast, easy, and cheap. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Miniscrew-assisted mandibular molar distalization in a patient with skeletal class-III malocclusion: A clinical case report

Directory of Open Access Journals (Sweden)

Seyed Mohammadreza Safavi

2013-01-01

Full Text Available In nongrowing patients with mild skeletal Class-III malocclusion, premolar extraction or molar distalization in the lower arch can be done as a part of camouflage treatment. Temporary anchorage devices are widely used for this purpose because they do not produce undesirable reciprocal effects and do not depend on the patient′s cooperation. However, most reported cases in this regard have used interradicular miniscrews in the mandibular arch and these have a risk of failure as they can loosen due to collision with adjacent roots. This article showcases mandibular molar distalization utilizing miniscrews, inserted at the retromolar area to correct a Class-III problem. A 24-year-old girl with a mild skeletal Class-III malocclusion and dental Class-III molar and canine relationship bilaterally was referred for orthodontic treatment. The treatment plan included distalization of the lower molars bilaterally followed by full fixed appliance therapy, after third molar extractions. For the lower molar distalization, the miniscrews were inserted at the retromolar pad. At the end of 21 months, a Class-I molar and canine relationship, normal overjet and overbite were obtained. The average amount of distalization of mandibular first molar was 3.2 mm at the crown level. In conclusion, placing miniscrews at the retromolar pad area for lower molar distalization was found to be a simple and effective method for correcting anterior cross bite and mandibular anterior crowding or protrusion, without the need for patient compliance.

[Maxillo-facial surgery in skeletal Class II: repercussions on the temporo-mandibular joints].

Science.gov (United States)

Manière-Ezvan, Armelle; Savoldelli, Charles; Busson, Floriant; Oueiss, Arlette; Orthlieb, Jean-Daniel

2016-03-01

These interventions usually aimed at the correction of the skeletal discrepancy by mandibular retrognatism with an advancement of the distal portion of the mandible after mandibular osteotomy. The position of the condyle is determined during the osteosynthesis with miniplates. Condyles are set back in relation with the supine position of the patient and the weakness of his (her) curarized muscle. All studies show that surgery of mandibular advancement causes a lateral, torque and backward movement of the condyles, all harmful to the condyles. Factors that predispose to condylar resorption are "the patient": a woman, young (between 15 and 40), high mandibular angle, with a history of temporo-mandibular disorders and surgical overload applied to the condyles. What are the possible solutions to avoid failures? Patient preparation before surgery and surgery simulation with an articulator, condylar position control during surgery, working with surgeons to achieve a condylar portion stabilization system (with the CAD), quickly set up a mobilization of the mandible by physiotherapy. © EDP Sciences, SFODF, 2016.

Evaluation of the relationship between mandibular third molar and mandibular canal by different algorithms of cone-beam computed tomography.

Science.gov (United States)

Mehdizadeh, Mojdeh; Ahmadi, Navid; Jamshidi, Mahsa

2014-11-01

Exact location of the inferior alveolar nerve (IAN) bundle is very important. The aim of this study is to evaluate the relationship between the mandibular third molar and the mandibular canal by cone-beam computed tomography. This was a cross-sectional study with convenience sampling. 94 mandibular CBCTs performed with CSANEX 3D machine (Soredex, Finland) and 3D system chosen. Vertical and horizontal relationship between the mandibular canal and the third molar depicted by 3D, panoramic reformat view of CBCT and cross-sectional view. Cross-sectional view was our gold standard and other view evaluated by it. There were significant differences between the vertical and horizontal relation of nerve and tooth in all views (p < 0.001). The results showed differences in the position of the inferior alveolar nerve with different views of CBCT, so CBCT images are not quite reliable and have possibility of error.

Mandibular Symmetrical Bilateral Canine-Lateral Incisors Transposition: Its Early Diagnosis and Treatment Considerations

Directory of Open Access Journals (Sweden)

Yehoshua Shapira

2016-01-01

Full Text Available Bilateral mandibular tooth transposition is a relatively rare dental anomaly caused by distal migration of the mandibular lateral incisors and can be detected in the early mixed dentition by radiographic examination. Early diagnosis and interceptive intervention may reduce the risk of possible transposition between the mandibular canine and lateral incisor. This report illustrates the orthodontic management of bilateral mandibular canine-lateral incisor transposition. Correct positioning of the affected teeth was achieved on the left side while teeth on the right side were aligned in their transposed position. It demonstrates the outcome of good alignment of the teeth in the dental arch.

Mandibular lingual vascular canals (MLVC): Evaluation on dental CTs of a case series

Energy Technology Data Exchange (ETDEWEB)

Scaravilli, Maria Serena; Mariniello, Mauro [Department of Oral and Maxillo-Facial Sciences, Section of Oral and Implant Surgery, University of Naples ' Federico II' , Naples (Italy); Sammartino, Gilberto, E-mail: serena.scaravilli@gmail.com [Department of Oral and Maxillo-Facial Sciences, Section of Oral and Implant Surgery, University of Naples ' Federico II' , Naples (Italy)

2010-11-15

Purpose: The aim of this study was to assess the anatomy of the mandibular lingual foramen (MLF) and its linked canals (mandibular lingual vascular canals - MLVC), describing their frequency, diameter, location, and course. Materials and methods: One hundred and fourteen computed tomography (CT) images of the mandible (57 male and 57 female; mean age 44.70 {+-} 12.53; age range 13-75 years, were evaluated. The CT sections were obtained on axial plane by using a bone reconstruction algorithm and then processed with dedicated software (Dentascan), with a standard protocol. Results: 103 patients (90.35%) had at least one lingual vascular canal and 52 (45.61%) had multiple (two or three) canals. The typical locations of MLVC were the midline of the mandible (median lingual canal [MLC]). The mean diameter of the lingual canals in the midline (MLC) was 0.8 mm {+-} 0. The direction of MLC progresses in an anterior and slightly caudal sense. Conclusions: Dental CT examination easily demonstrates the presence, position, direction and size of the lingual foramen and of the lingual vascular canals of the mandible. Radiologists and oral surgeons should be aware of these canals and their importance, in order to prevent bleeding complications during implants placement and other surgical procedures.

Computer-assisted preoperative simulation for positioning and fixation of plate in 2-stage procedure combining maxillary advancement by distraction technique and mandibular setback surgery

Directory of Open Access Journals (Sweden)

Hideyuki Suenaga

2016-01-01

Conclusion: The implementation of the computer-assisted preoperative simulation for the positioning and fixation of plate in 2-stage orthognathic procedure using distraction technique and mandibular setback surgery yielded good results.

S100β-Positive Cells of Mesenchymal Origin Reside in the Anterior Lobe of the Embryonic Pituitary Gland.

Directory of Open Access Journals (Sweden)

Kotaro Horiguchi

Full Text Available The anterior and intermediate lobes of the pituitary gland develop through invagination of the oral ectoderm and as they are endocrine tissues, they participate in the maintenance of vital functions via the synthesis and secretion of numerous hormones. We recently observed that several extrapituitary cells invade the anterior lobe of the developing pituitary gland. This raised the question of the origin(s of these S100β-positive cells, which are not classic endocrine cells but instead comprise a heterogeneous cell population with plural roles, especially as stem/progenitor cells. To better understand the roles of these S100β-positive cells, we performed immunohistochemical analysis using several markers in S100β/GFP-TG rats, which express GFP in S100β-expressing cells under control of the S100β promoter. GFP-positive cells were present as mesenchymal cells surrounding the developing pituitary gland and at Atwell's recess but were not present in the anterior lobe on embryonic day 15.5. These cells were negative for SOX2, a pituitary stem/progenitor marker, and PRRX1, a mesenchyme and pituitary stem/progenitor marker. However, three days later, GFP-positive and PRRX1-positive (but SOX2-negative cells were observed in the parenchyma of the anterior lobe. Furthermore, some GFP-positive cells were positive for vimentin, p75, isolectin B4, DESMIN, and Ki67. These data suggest that S100β-positive cells of extrapituitary origin invade the anterior lobe, undergoing proliferation and diverse transformation during pituitary organogenesis.

S100β-Positive Cells of Mesenchymal Origin Reside in the Anterior Lobe of the Embryonic Pituitary Gland.

Science.gov (United States)

Horiguchi, Kotaro; Yako, Hideji; Yoshida, Saishu; Fujiwara, Ken; Tsukada, Takehiro; Kanno, Naoko; Ueharu, Hiroki; Nishihara, Hiroto; Kato, Takako; Yashiro, Takashi; Kato, Yukio

2016-01-01

The anterior and intermediate lobes of the pituitary gland develop through invagination of the oral ectoderm and as they are endocrine tissues, they participate in the maintenance of vital functions via the synthesis and secretion of numerous hormones. We recently observed that several extrapituitary cells invade the anterior lobe of the developing pituitary gland. This raised the question of the origin(s) of these S100β-positive cells, which are not classic endocrine cells but instead comprise a heterogeneous cell population with plural roles, especially as stem/progenitor cells. To better understand the roles of these S100β-positive cells, we performed immunohistochemical analysis using several markers in S100β/GFP-TG rats, which express GFP in S100β-expressing cells under control of the S100β promoter. GFP-positive cells were present as mesenchymal cells surrounding the developing pituitary gland and at Atwell's recess but were not present in the anterior lobe on embryonic day 15.5. These cells were negative for SOX2, a pituitary stem/progenitor marker, and PRRX1, a mesenchyme and pituitary stem/progenitor marker. However, three days later, GFP-positive and PRRX1-positive (but SOX2-negative) cells were observed in the parenchyma of the anterior lobe. Furthermore, some GFP-positive cells were positive for vimentin, p75, isolectin B4, DESMIN, and Ki67. These data suggest that S100β-positive cells of extrapituitary origin invade the anterior lobe, undergoing proliferation and diverse transformation during pituitary organogenesis.

Esthetic evaluation of single-tooth implants in the anterior mandible.

Science.gov (United States)

Hof, Markus; Tepper, Gabor; Koller, Barbara; Krainhöfner, Martin; Watzek, Georg; Pommer, Bernhard

2014-09-01

Single-tooth replacement of anterior mandibular teeth is frequently complicated by insufficient bucco-lingual bone width and limited mesio-distal space available for implant placement. The aim of the present study was to assess implant esthetics in the partially edentulous anterior mandible. Esthetic evaluation of 43 anterior mandibular single-tooth implants in 15 women and 28 men was performed using esthetic indices (PES = Pink Esthetic Score, PI = Papilla Index, SES = Subjective Esthetic Score) as well as subjective patients' Visual Analogue Scale (VAS) ratings. Clinical and radiological parameters (implant and crown dimensions, pocket depth, bleeding on probing, plaque, keratinized mucosa, marginal bone level, and distance to adjacent teeth) were tested for influence. Implant esthetics were judged satisfactory (PES ≤10) in 42% of implants compared with a patient satisfaction rate of 87%. Correlation between objective indices (PES/PI: rs  = 0.62, PES/SES: rs  = -0.73, PI/SES: rs  = -0.48) was highly significant (P ≤ 0.001); however, no association to subjective patients' ratings could be observed. Type of prosthetic restoration (single crown vs. tulip-shaped double crowns), mesio-distal crown width as well as anatomic crown length significantly affected esthetic scores. Patients' judgment, by contrast, could not be associated to any prognostic factor. Subjective patient satisfaction with implant esthetics in the partially edentulous anterior mandible is high, however, remains hard to predict or objectively quantify. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

An unusual case report of bilateral mandibular radicular cysts

Directory of Open Access Journals (Sweden)

Niyanta S Joshi

2011-01-01

Full Text Available A radicular cyst is one of the most common odontogenic cysts of anterior maxilla, not commonly seen in adolescence. Here, we present a rare, atypical case, of bilateral radicular cysts of the mandibular posterior region in a 13-year-old girl. The patient management comprised surgical enucleation of cystic sac under general anesthesia followed by rehabilitation of the same area. The purpose of this article is to lay emphasis on the pedodontist′s role in early diagnosis and treatment of such lesions.

Stafne bone cavity with ectopic salivary gland tissue in the anterior of mandible

Directory of Open Access Journals (Sweden)

Parviz Deyhimi

2016-01-01

Full Text Available Stafne bone cavities (SBCs are uncommon well-demarcated defects of the mandible, which often occur in the posterior portion of the jaw bone and are usually asymptomatic. Furthermore, SBC is found in men aged 50-70-year-old. Anterior mandibular variants of SBC are very rare. This article describes a case of anterior SBC in a 45-year-old man that resembled endodontic periapical lesions. Upon histopathological examination, it turned out to be a normal salivary gland tissue.

Rate of retraction of anterior teeth after canine distraction

Directory of Open Access Journals (Sweden)

Litesh Singla

2017-01-01

Full Text Available Background and Objectives: Orthodontists have always strived to develop a new technique to reduce the treatment time with minimal patient cooperation. Canine distraction was introduced as an alternative technique for canine retraction in a minimum possible period of 3 weeks, thus avoiding taxing the anchorage by molars since the canines are retracted within the lag phase of molars. It has been proved by numerous studies that the bone mesial to canine after rapid canine distraction through the extraction socket is a new and immature. The objectives of this study were to evaluate the rate of retraction of anterior teeth, the time taken, and anchorage loss during the retraction of anterior teeth into this newly organized bone. Methods: Six orthodontic patients who required first premolar extractions were selected. Undermining of the interseptal bone distal to the canine was done, and canines were retracted into the extraction space of the first premolar, using a custom-made tooth borne intraoral distraction screw, following which the incisors were retracted into the newly formed bone using closing loops. The patients were called at weekly intervals to measure the amount of space left between canine and lateral incisor, and the rate of retraction was calculated after space was closed. Results: The present study showed that the rate of retraction of mandibular and maxillary teeth was 0.74 ± 0.39 mm and 0.73 ± 0.15 mm/week, respectively. The anchorage loss was found to be 1.83 ± 0.29 mm and 2.08 ± 0.38 mm in mandibular and maxillary arches, respectively. The time taken to retract the incisors was found to be 40.3 ± 1.5 and 41.7 ± 0.6 days for mandibular and maxillary arches, respectively. Interpretation and Conclusion: Retraction of incisors is faster in both maxillary and mandibular arches when the incisors are retracted immediately into the immature bone created after canine distraction.

Implant-supported mandibular removable partial dentures; patient-based outcome measures in relation to implant position.

Science.gov (United States)

Jensen, Charlotte; Raghoebar, Gerry M; Kerdijk, Wouter; Meijer, Henny J A; Cune, Marco S

2016-12-01

To assess the benefits of implant support to Removable Partial Dentures (RPD) in patients with a bilateral free-ending situation in the mandible and to determine the most favorable implant position: the premolar (PM) or the molar (M) region. Thirty subjects with a bilateral unbounded posterior saddle received 2 PM and 2M implants. A new RPD was placed. Implant support was provided 3 months later. Two PM implants supported the RPD. After 3 months the 2M implants were used or vice versa. Outcome measures included oral health related quality of life (OHIP-NL49), general health status (SF-36), contentment assessed on a Visual Analogue Scale (VAS) and the number of hours that the RPD was worn. Data were collected prior to treatment, 3 months after having functioned with a new RPD and after 3 and 6 months with implant support. Finally, patients expressed their preferred implant position. The general health status (SF-36) was not influenced. OHIP-NL49 values and mean wearing-time were statistical significantly more favorable for ISRPD's, regardless of the implant position. Per day, the ISRPD's were worn 2-3h more than the unsupported new RPD. Patients' expectations were met as the VAS-scores of anticipated and realized contentment did not reach a statistical significant level (p>0.05). VAS scores for ISRPD's with M implant support were higher than for PM implant support. Finally, 56.7% of subjects preferred the M implant support, 13.3% expressed no preference and 30% opted for PM implant support. Mandibular implant support favorably influences oral health related patient-based outcome measures in patients with a bilateral free-ending situation. The majority of patients prefer the implant support to be in the molar region. Patients with a bilateral free-ending situation in the mandible opposed by a maxillary denture benefit from implant support to their mandibular removable partial denture. Most patients prefer this support to be in the molar region. Copyright © 2016

The efficacy of supplemental intraosseous anesthesia after insufficient mandibular block

Directory of Open Access Journals (Sweden)

Samir Prohić

2005-02-01

Full Text Available It is a well-known scientific fact that only a small percentage of infiltration of inferior alveolar nerve is clinically proven to be efficient. The objective of this study was to determine the anesthetic efficacy of supplemental intraosseous injection, used after the insufficient classical mandibular block that didn't provide deep pulp anesthesia of mandibular molar planed for extraction. The experimental teeth consisted of 98 mandibular molars with clinical indication for extraction. Based on the history of disease, we indicated the extraction of the tooth. After that each tooth was tested with a electric pulp tester P1. We tested the pulp vitality and precisely determined the level of vitality. After that, each patient received classical mandibular block, and the pulp vitality was tested again. If the pulp tester indicated negative vitality for the certain mandibular molar, and the patient didn't complain about pain or discomfort during the extraction, the molar was extracted and the result was added to anesthetic success rate for the classical mandibular block. If, five minutes after receiving the mandibular block, the pulp tester indicated positive vitality (parameters of vitality or the patient complained about pain or discomfort (parameters of pain and discomfort, we used the Stabident intraosseous anesthesia system. Three minutes after the application of supplemental intraosseous injection the molar was tested with the pulp tester again. The anesthetic solution used in both anesthetic techniques is lidocaine with 1:100.000 epinephrine. The results of this study indicate that the anesthetic efficacy of the mandibular block is 74.5%, and that supplemental intraosseous anesthesia, applied after the insufficient mandibular block, provides pulpal anesthesia in 94.9% of mandibular molars. The difference between anesthetic efficacy of the classical mandibular block and anesthetic efficacy of the supplemental intraosseous anesthesia, applied

The efficacy of supplemental intraosseous anesthesia after insufficient mandibular block.

Science.gov (United States)

Prohić, Samir; Sulejmanagić, Halid; Secić, Sadeta

2005-02-01

It is a well-known scientific fact that only a small percentage of infiltration of inferior alveolar nerve is clinically proven to be efficient. The objective of this study was to determine the anesthetic efficacy of supplemental intraosseous injection, used after the insufficient classical mandibular block that didn't provide deep pulp anesthesia of mandibular molar planed for extraction. The experimental teeth consisted of 98 mandibular molars with clinical indication for extraction. Based on the history of disease, we indicated the extraction of the tooth. After that each tooth was tested with a electric pulp tester P1. We tested the pulp vitality and precisely determined the level of vitality. After that, each patient received classical mandibular block, and the pulp vitality was tested again. If the pulp tester indicated negative vitality for the certain mandibular molar, and the patient didn't complain about pain or discomfort during the extraction, the molar was extracted and the result was added to anesthetic success rate for the classical mandibular block. If, five minutes after receiving the mandibular block, the pulp tester indicated positive vitality (parameters of vitality) or the patient complained about pain or discomfort (parameters of pain and discomfort), we used the Stabident intraosseous anesthesia system. Three minutes after the application of supplemental intraosseous injection the molar was tested with the pulp tester again. The anesthetic solution used in both anesthetic techniques is lidocaine with 1:100.000 epinephrine. The results of this study indicate that the anesthetic efficacy of the mandibular block is 74.5%, and that supplemental intraosseous anesthesia, applied after the insufficient mandibular block, provides pulpal anesthesia in 94.9% of mandibular molars. The difference between anesthetic efficacy of the classical mandibular block and anesthetic efficacy of the supplemental intraosseous anesthesia, applied after the

Reduced mandibular range of motion in Duchenne Muscular Dystrophy: predictive factors.

Science.gov (United States)

van Bruggen, H W; Van Den Engel-Hoek, L; Steenks, M H; Bronkhorst, E M; Creugers, N H J; de Groot, I J M; Kalaykova, S I

2015-06-01

Patients with Duchenne muscular dystrophy (DMD) experience negative effects upon feeding and oral health. We aimed to determine whether the mandibular range of motion in DMD is impaired and to explore predictive factors for the active maximum mouth opening (aMMO). 23 patients with DMD (mean age 16.7 ± 7.7 years) and 23 controls were assessed using a questionnaire about mandibular function and impairments. All participants underwent a clinical examination of the masticatory system, including measurement of mandibular range of motion and variables related to mandibular movements. In all patients, quantitative ultrasound of the digastric muscle and the geniohyoid muscle and the motor function measure (MFM) scale were performed. The patients were divided into early and late ambulatory stage (AS), early non-ambulatory stage (ENAS) and late non-ambulatory stage (LNAS). All mandibular movements were reduced in the patient group (P < 0.001) compared to the controls. Reduction in the aMMO (<40 mm) was found in 26% of the total patient group. LNAS patients had significantly smaller mandibular movements compared to AS and ENAS (P < 0.05). Multiple linear regression analysis for aMMO revealed a positive correlation with the body height and disease progression, with MFM total score as the strongest independent risk factor (R(2) = 0.71). Mandibular movements in DMD are significantly reduced and become more hampered with loss of motor function, including the sitting position, arm function, and neck and head control. We suggest that measurement of the aMMO becomes a part of routine care of patients with DMD. © 2015 John Wiley & Sons Ltd.

The effects of orthognathic surgery on mandibular movements in patients with mandibular prognathism

Directory of Open Access Journals (Sweden)

Sinobad Vladimir

2012-01-01

Full Text Available Introduction. Mandibular prognathism, one of the most severe dentofacial deformities, affects the person’s appearance, psychological health and the quality of life in the most sensitive age period. Objective. The aim of this study was to evaluate the effects of sagittal split ramus osteotomy on the range of mandibular border movements in the early postoperative period. Methods. The study was conducted on 20 patients, of mean age 20.8 years, with mandibular prognathism. All patients included in this study were operated on by bilateral sagittal spliting ramus osteotomy according to Obwegeser and Dal Pont followed by mandibular immobilization during eight weeks. In all patients mandibular border movements were recorded before and six months after surgery using the computerized pantograph Arcus-Digma (KaVo EWL GmbH, Leutkirch, Germany. Results. The analysis of the chosen kinematic parameters revealed that sagittal split ramus osteotomy followed by eight weeks of mandibular immobilization had severe effects on the mouth opening. Six months after surgery the range of maximal mouth opening decreased for approximately 13.9 mm in relation to the preoperative stage. On the contrary, the ranges of maximal protrusion and the border of laterotrusive excursions increased significantly after surgery. Conclusion. In patients with mandibular prognathism where enormous mandibular growth was the main causal factor of the deformity, the sagittal split ramus osteotomy yielded good results. The rigid fixation of bone fragments and reduced period of mandibular immobilization followed by appropriate physical therapy could considerably contribute to a more rapid recovery of mandibular kinematics in the postoperative period.

A new method of CT scanning for the diagnosis of mandibular fractures

International Nuclear Information System (INIS)

Tsukagoshi, Taku; Satoh, Kaneshige; Onizuka, Takuya

1990-01-01

The condylar neck of the mandible is one of the most common fracture sites in the facial skeleton. Such a fracture is routinely diagnosed by A-P, lateral oblique, and Towne projection roentgenography or orthopantomography. Despite the combination of these films, fracture of the neck of the mandible is still difficult to diagnose definitely. Therefore, a new CT scanning method was developed for diagnosing fractures of the neck of the condylar mandible. The CT axis is projected along the length of the mandible, extending from the condyle to the symphysis. This projection visualizes both the condyle and the mandibular symphysis in the same plane. The patient is placed in a supine position with the head fully extended. The base line, a line extending from the midpoint of the glenoid fossa to the menton, is determined with a lateral facial cephalogram. CT scanning with a 5 mm window is performed in parallel with and 2 cm anterior to and 2 cm posterior to the base line. When CT scanning was performed in a healthy volunteer, the condition of the condyle and the condylar neck of the mandible was clearly shown, and the view extended from the condyle to the symphysis. For automobile accident patients in whom fracture of the neck of the mandible was associated with fracture of the symphysis, two fractures were found in the same plane. A newly developed CT scanning technique is useful in the diagnosis of fractures of the condylar neck of the mandible and in the identification of fractures at other mandibular sites. It also allows scanning of patients in a supine position, which may aid in managing patients with multiple traumas. (N.K.)

A Feedback-Controlled Mandibular Positioner Identifies Individuals With Sleep Apnea Who Will Respond to Oral Appliance Therapy.

Science.gov (United States)

Remmers, John E; Topor, Zbigniew; Grosse, Joshua; Vranjes, Nikola; Mosca, Erin V; Brant, Rollin; Bruehlmann, Sabina; Charkhandeh, Shouresh; Zareian Jahromi, Seyed Abdolali

2017-07-15

Mandibular protruding oral appliances represent a potentially important therapy for obstructive sleep apnea (OSA). However, their clinical utility is limited by a less-than-ideal efficacy rate and uncertainty regarding an efficacious mandibular position, pointing to the need for a tool to assist in delivery of the therapy. The current study assesses the ability to prospectively identify therapeutic responders and determine an efficacious mandibular position. Individuals (n = 202) with OSA participated in a blinded, 2-part investigation. A system for identifying therapeutic responders was developed in part 1 (n = 149); the predictive accuracy of this system was prospectively evaluated on a new population in part 2 (n = 53). Each participant underwent a 2-night, in-home feedback-controlled mandibular positioner (FCMP) test, followed by treatment with a custom oral appliance and an outcome study with the oral appliance in place. A machine learning classification system was trained to predict therapeutic outcome on data obtained from FCMP studies on part 1 participants. The accuracy of this trained system was then evaluated on part 2 participants by examining the agreement between prospectively predicted outcome and observed outcome. A predicted efficacious mandibular position was derived from each FCMP study. Predictive accuracy was as follows: sensitivity 85%; specificity 93%; positive predictive value 97%; and negative predictive value 72%. Of participants correctly predicted to respond to therapy, the predicted mandibular protrusive position proved efficacious in 86% of cases. An unattended, in-home FCMP test prospectively identifies individuals with OSA who will respond to oral appliance therapy and provides an efficacious mandibular position. The trial that this study reports on is registered on www.clinicaltrials.gov, ID NCT03011762, study name: Feasibility and Predictive Accuracy of an In-Home Computer Controlled Mandibular Positioner in Identifying Favourable

The influence of resilient liner and clip attachments for bar-implant-retained mandibular overdentures on opposing maxillary ridge. A 5-year randomised clinical trial.

Science.gov (United States)

Elsyad, M A; Ashmawy, T M; Faramawy, A G

2014-01-01

This study aimed to compare the influence of resilient liner and clip attachments for bar-implant-retained mandibular overdentures on opposing maxillary ridge after 5 years of denture wearing. Thirty edentulous male patients (mean age 62·5 years) received two implants in the anterior mandible after being allocated into two equal groups using balanced randomisation. After 3 months, implants were connected with resilient bars. New maxillary complete dentures were then constructed, and mandibular overdentures were retained to the bars with either clips (group I, GI) or silicone resilient liners (group II, GII). The prosthetic and soft tissue complications of the maxillary dentures were recorded 6 months (T6 m ), 1 year (T1), 3 years (T3) and 5 years (T5) after overdenture insertion. Traced rotational tomograms were used for measurements of maxillary alveolar bone loss. The proportional value between bone areas and areas of reference not subject to resorption was expressed as a ratio (R). Change in R immediately before (T0) and after 5 years (T5) of overdenture insertion was calculated. Maxillary denture relining times and frequency of flabby anterior maxillary ridge occurred significantly more often in GI compared with GII. The change of R in anterior part of maxilla was significantly higher than change of R in posterior part in both groups. GI showed significant resorption of anterior residual ridge compared with GII. Relining times and frequencies of flabby ridge were significantly correlated with change in R. Within the limitations of this study, resilient liner attachments for bar-implant-retained mandibular overdentures are associated with decreased resorption and flabbiness of maxillary anterior residual ridge and fewer maxillary denture relining times when compared with clip attachments. © 2013 John Wiley & Sons Ltd.

Changes in the edentulous maxilla with ball and telescopic attachments of implant-retained mandibular overdentures: a 4-year retrospective study.

Science.gov (United States)

Elsyad, Moustafa Abdou; Khairallah, Ahmed Samir; Shawky, Ahmad Fathalla

2013-07-01

This retrospective study investigated the clinical and radiographic changes in the edentulous maxilla in patients with either ball or telescopic attachments of implantretained mandibular overdentures. Thirty-two completely edentulous patients (21 males and 11 females) received two implants in the canine region of the mandible. New maxillary complete dentures and mandibular overdentures were fabricated. Overdentures were connected to the implants either with ball (group 1, n = 16) or telescopic (group 2, n = 16) attachments. Retention and stability of the maxillary denture as well as mucosal changes of the maxillary ridge were recorded after 4 years of denturewearing. Traced rotational tomograms were used for measurements of maxillary alveolar bone loss. The proportional value between bone areas and areas of reference not subject to resorption was expressed as a ratio (R). Change in R immediately before (T0) and after 4 years (T4) of overdenture insertion was calculated for the anterior and posterior regions of the maxilla. After 4 years of denture-wearing, maxillary denture retention was significantly higher in group 1 than in group 2, while occurrence of flabby ridges was significantly higher in group 2 than in group 1. The change in R of the anterior region of the maxilla was significantly higher than the change in the posterior region in both groups. Group 2 showed significant anterior residual ridge resorption compared to group 1. Telescopic attachments for implant-retained mandibular overdentures are associated with increased maxillary ridge resorption and flabbiness, and decreased maxillary denture retention when compared to ball attachments.

Expression of chemokine CXCL10 in dendritic-cell-like S100β-positive cells in rat anterior pituitary gland.

Science.gov (United States)

Horiguchi, Kotaro; Fujiwara, Ken; Higuchi, Masashi; Yoshida, Saishu; Tsukada, Takehiro; Ueharu, Hiroki; Chen, Mo; Hasegawa, Rumi; Takigami, Shu; Ohsako, Shunji; Yashiro, Takashi; Kato, Takako; Kato, Yukio

2014-09-01

Chemokines are mostly small secreted polypeptides whose signals are mediated by seven trans-membrane G-protein-coupled receptors. Their functions include the control of leukocytes and the intercellular mediation of cell migration, proliferation, and adhesion in several tissues. We have previously revealed that the CXC chemokine ligand 12 (CXCL12) and its receptor 4 (CXCR4) are expressed in the anterior pituitary gland, and that the CXCL12/CXCR4 axis evokes the migration and interconnection of S100β-protein-positive cells (S100β-positive cells), which do not produce classical anterior pituitary hormones. However, little is known of the cells producing the other CXCLs and CXCRs or of their characteristics in the anterior pituitary. We therefore examined whether CXCLs and CXCRs occurred in the rat anterior pituitary lobe. We used reverse transcription plus the polymerase chain reaction to analyze the expression of Cxcl and Cxcr and identified the cells that expressed Cxcl by in situ hybridization. Transcripts of Cxcl10 and its receptor (Cxcr3 and toll-like receptor 4, Tlr4) were clearly detected: cells expressing Cxcl10 and Tlr4 were identified amongst S100β-positive cells and those expressing Cxcr3 amongst adrenocorticotropic hormone (ACTH)-producing cells. We also investigated Cxcl10 expression in subpopulations of S100β-positive cells. We separated cultured S100β-positive cells into the round-type (dendritic-cell-like) and process-type (astrocyte- or epithelial-cell-like) by their adherent activity to laminin, a component of the extracellular matrix; CXCL10 was expressed only in round-type S100β-positive cells. Thus, CXCL10 produced by a subpopulation of S100β-positive cells probably exerts an autocrine/paracrine effect on S100β-positive cells and ACTH-producing cells in the anterior lobe.

Retention and Stability of Implant-Retained Mandibular Overdentures Using Different Types of Resilient Attachments: An In Vitro Study.

Science.gov (United States)

ELsyad, Moustafa Abdou; Agha, Nora Nory; Habib, Ahmed Ali

2016-01-01

The aim of this study was to evaluate and compare the retention and stability of mandibular implant overdentures using different types of resilient attachments. Two implant analogs were inserted in the canine areas of an acrylic edentulous mandibular model. A metal-reinforced experimental overdenture was constructed and connected to the implant analogs (on two occasions) using either resilient telescopic or Locator attachments. Locators were divided into three subgroups according to the degree of retention of the male nylon insert: Locator extra-light retention (blue insert), Locator light retention (pink insert), and Locator medium retention (transparent insert). Vertical and oblique (anterior, posterior, and lateral) dislodging forces were measured at the beginning of the study (initial retention) and after 540 cycles of denture insertion and removal (final retention). For all dislodging forces, Locator medium recorded the highest initial and final retention. Telescopic attachments recorded the lowest retention during vertical and anterior dislodging, and Locator extra-light recorded the lowest retention during lateral and posterior dislodging. For all types of Locator attachments, anterior dislodging recorded the highest initial and final retention, and lateral dislodging recorded the lowest retention. For the telescopic attachment, posterior dislodgment recorded the highest initial and final retention, and anterior dislodging recorded the lowest retention. After repeated denture insertions and removals, the highest retention and stability were recorded with Locator medium followed by Locator light. The lowest retention was recorded with resilient telescopic attachment, and the lowest stability was recorded with Locator extra-light.

A new oviraptorid (Dinosauria: Theropoda) from the Upper Cretaceous of southern China.

Science.gov (United States)

Wang, Shuo; Sun, Chengkai; Sullivan, Corwin; Xu, Xing

2013-01-01

This paper describes a new oviraptorid dinosaur taxon, Ganzhousaurus nankangensis gen. et sp. nov., based on a specimen collected from the Upper Cretaceous Nanxiong Formation of Nankang County, Ganzhou City, Jiangxi Province, southern China. This new taxon is distinguishable from other oviraptorids based on the following unique combination of primitive and derived features: relatively shallow dentary; absence of fossa or pneumatopore on lateral surface of dentary; weakly downturned anterior mandibular end; shallow depression immediately surrounding anterior margin of external mandibular fenestra; external mandibular fenestra subdivided by anterior process of surangular; dentary posteroventral process slightly twisted and positioned on mandibular ventrolateral surface; shallow longitudinal groove along medial surface of dentary posteroventral process; angular anterior process wider transversely than deep dorsoventrally; sharp groove along ventrolateral surface of angular anterior process; ventral border of external mandibular fenestra formed mainly by angular; ventral flange along distal half of metatarsal II; and arctometatarsal condition absent. Phylogenetic analysis places Ganzhousaurus nankangensis gen. et sp. nov. in the clade Oviraptoridae, together with Oviraptor, Citipati, Rinchenia and the unnamed Zamyn Khondt oviraptorid.

Modified mandibular splint therapy for disc displacement with reduction of the temporomandibular joint

OpenAIRE

Ju-Hui Wu; Yu-Hsun Kao; Chao-Ming Chen; Ching-Wei Shu; Chun-Ming Chen; I-Yueh Huang

2013-01-01

Occlusal splints are a standard method to treat disc displacement with reduction of the temporomandibular joint (TMJ). They can be classified into three major groups on the basis of function: stabilization splints, distraction splints (pivot), and anterior repositioning splints. The aim of this paper is to introduce a modified mandibular splint, the Kaohsuing Medical University splint, and its associated treatment regimen for management of disc displacement with reduction of the TMJ. The key ...

Prefabricated fibula free flap with dental implants for mandibular reconstruction.

Science.gov (United States)

Pauchet, D; Pigot, J-L; Chabolle, F; Bach, C-A

2018-03-02

Free fibula transplant is routinely used for mandibular reconstruction in head and neck cancer. Dental rehabilitation, the objective of mandibular reconstruction, requires the use of dental implants as supports for fixed or removable dentures. Positioning of fibular bone grafts and implants determines implant osseointegration and the possibilities of dental rehabilitation. Prefabrication of a fibula free flap with dental implants prior to harvesting as a free flap can promote implant osseointegration. The position of the implants must then be precisely planned. Virtual surgery and computer-assisted design and prefabrication techniques are used to plan the reconstruction and then reproduce this planning by means of tailored fibula and mandible cutting guides, thereby ensuring correct positioning of fibular bone fragments and implants. The prefabricated fibula free flap technique requires two surgical procedures (prefabrication and flap transfer) and precise preoperative planning. Prefabricated fibula free flap with dental implants, by improving the quality of osseointegration of the implants before flap transfer, extends the possibilities of prosthetic rehabilitation in complex secondary mandibular reconstructions. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Anterior point of reference: Current knowledge and perspectives in prosthodontics

Directory of Open Access Journals (Sweden)

Prince Kumar

2012-01-01

Full Text Available The opening and closing mandibular axis is not a purely theoretical postulation, but an absolutely demonstrable biomechanical entity. It is very crucial to accurately record and transfer to articulators for the purpose of maxillofacial rehabilitation. Following the Face bow record and transfer of the mandibular axis to an anatomic articulator, we can then mount the casts so that they open and close on the articulator in the same fashion as the patient′s jaws. For this reason one of the fixed factors presented by the patient is taken into the consideration, which if properly considered, can be of inestimable value in all phases of dental treatment. This paper has sought to review the current concepts and practical implications regarding anterior point of reference in prosthodontics.

Pars-plana fluid aspiration for positive vitreous cavity pressure in anterior segment surgeries

Directory of Open Access Journals (Sweden)

Thomas Kuriakose

2018-01-01

Full Text Available Positive vitreous pressure due to misdirection of aqueous or choroidal effusion leads to shallowing of the anterior chamber (AC before or during anterior segment surgeries. This shallow AC if not addressed makes surgery difficult and increases the risk of surgical complications. Methods to prevent and manage this condition described in literature are not without problems. We describe a minimally invasive technique of passing a 30G needle through the pars-plana to aspirate misdirected fluid from vitreous cavity either as a prophylaxis just before surgery or during it, thereby decreasing positive vitreous pressure. This technique, used in 12 eyes, seems to be effective in patients with angle-closure glaucoma, malignant glaucoma, and per-operative sudden increase in vitreous pressure during surgery. Small-incision surgeries are ideally suited for this procedure. This minimally invasive technique is simple to perform and complications are unlikely to be more than what is seen with intravitreal injections.

Mandibular tori are associated with mechanical stress and mandibular shape.

Science.gov (United States)

Cortes, Arthur Rodriguez Gonzalez; Jin, Zhaoyu; Morrison, Matthew Daniel; Arita, Emiko Saito; Song, Jun; Tamimi, Faleh

2014-11-01

The influence of mechanical stimulation on the formation of torus mandibularis (TM) is still poorly understood. We sought to understand the etiology of TMs by investigating the role of parafunctional activity and mandibular morphology on the formation of TMs. We designed a case-control study for patients attending the dental clinic of the present study (University of São Paulo School of Dentistry, São Paulo, SP, Brazil). Patients presenting with TMs were defined as cases, and those without TMs were defined as controls. Finite element analysis (FEA) was used in 3-dimensional mandibular models to examine the stress distribution in the mandibles with and without TMs. In addition, the associations of mandibular arch shape, mandibular cortical index, and parafunctional activity with the presence of T were assessed using odds ratio analysis. A total of 10 patients with TMs and 37 without TMs were selected (22 men and 25 women, mean age 54.3 ± 8.4 years). FEA showed a stress concentration in the region in which TMs form during simulation of parafunctional activity. The radiographic assessment showed that those with TMs were more likely to have a square-shaped mandible with sharp angles (P = .001) and a normal mandibular cortex (P = .03). The subjects without TMs had a round-shaped mandible with obtuse angles and an eroded mandibular cortex. Parafunctional activity could be causing the formation of TMs by concentrating mechanical stress in the region in which TMs usually form. Thus, mandibular geometries that favor stress concentration, such as square-shaped mandibles, will be associated with a greater prevalence of TMs. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Combined surgical management of mandibular angle prominence and microgenia

International Nuclear Information System (INIS)

Portelles Masso, Ayelen Maria; Berger Kohn, Carlos

2010-01-01

Chin play a very important role in facial aesthetics. Different deformities of volume and of position may occur at this level and it is the microgenia one of the more frequent. Treatment options include the use of silicone, alloplasty materials and autologous bone graft. Authors report the use of the bone removed from mandibular angle to increase the chin. This is the case of a white female patient aged 18 seen by the Orthognathics Multidisciplinary Staff of 'V. I. Lenin' Hospital due to its uncommon face width. The corresponding physical examination as well as the complementary ones diagnosed a bilateral prominence of mandibular angle associated with a microgenia. Surgery carried out was of remodeling type of both mandibular angles and genioplasty of height increase and a discrete advancement using the bone removed from the gonion. There were satisfactory aesthetic results without evidence of bone reabsorption. We conclude that use of autologous graft of mandibular angle is an effective treatment alternative for correction of microgenia. (author)

Feasibility of purely endoscopic intramedullary fixation of mandibular condyle fractures.

Science.gov (United States)

Frake, Paul C; Goodman, Joseph F; Joshi, Arjun S

2015-01-01

The investigators of this study hypothesized that fractures of the mandibular condyle can be repaired using short-segment intramedullary implants and purely endoscopic surgical technique, using a basic science, human cadaver model in an academic center. Endoscopic instrumentation was used through a transoral mucosal incision to place intramedullary implants of 2 cm in length into osteotomized mandibular condyles. The surgical maneuvers that required to insert these implants, including condyle positioning, reaming, implant insertion, and seating of the mandibular ramus, are described herein. Primary outcome was considered as successful completion of the procedure. Ten cadaveric mandibular condyles were successfully repaired with rigid intramedullary internal fixation without the use of external incisions. Both insertion of a peg-type implant and screwing a threaded implant into the condylar head were possible. The inferior portion of the implant remained exposed, and the ramus of the mandible was manipulated into position on the implant using retraction at the sigmoid notch. The results of this study suggest that purely endoscopic repair of fractures of the mandibular condyle is possible by using short-segment intramedullary titanium implants and a transoral endoscopic approach without the need for facial incisions or punctures. The biomechanical advantages of these intramedullary implants, including improved strength and resistance to mechanical failure compared with miniplates, have been recently established. The combination of improved implant design and purely endoscopic technique may allow for improved fixation and reduced surgical- and implant-related morbidity in the treatment of condylar fractures.

Radiological study of the mandibular fractures

Energy Technology Data Exchange (ETDEWEB)

Kim, Ju Won; Kim, Kyoung A; Koh, Kwang Jun [Department of Oral and Maxillofacial Radiology, School of Dentistry, and Institute of Oral Bio Science, Chonbuk National University, Jeonju (Korea, Republic of)

2009-06-15

To classify and evaluate mandibular fractures. The author classified mandibular fractures of 284 patients who were referred to the Chonbuk National University Dental Hospital during the period from March 2004 to June 2007. This study was based on the conventional radiographs as well as computed tomographs which were pertained to the 284 patients who have had the mandibular fractures including the facial bone fractures. And mandibular fractures were classified with respect to gender, age, site and type of the fractures. More frequently affected gender with mandibular fracture was male with the ratio of 3.3 : 1. The most frequently affected age with mandibular fracture was third decade (38%), followed by fourth decade (16%), second decade (15%), fifth decade (11%), sixth decade (7%), seventh decade (5%), eighth decade (4%), first decade (4%), and ninth decade (0.3%). The most frequent type of mandibular fracture was single fracture (58%), followed by double fracture (39%), triple fracture (3%). The most common site of mandibular fracture was mandibular condyle as 113 cases (27.7%) and the next was mandibular symphysis as 109 cases (26.7%), mandibular angle as 103 cases (25.3%), mandibular body as 83 cases (20.3%) in order. The sum of fracture sites were 408 sites and there were 1.4 fracture sites per one patient. The number of mandible fractures accompanied with facial bone fractures were 41 cases (14.4%). The results showed the most frequent type and common site of mandibular fracture was single fracture and mandibular condyle respectively.

Radiological study of the mandibular fractures

International Nuclear Information System (INIS)

Kim, Ju Won; Kim, Kyoung A; Koh, Kwang Jun

2009-01-01

To classify and evaluate mandibular fractures. The author classified mandibular fractures of 284 patients who were referred to the Chonbuk National University Dental Hospital during the period from March 2004 to June 2007. This study was based on the conventional radiographs as well as computed tomographs which were pertained to the 284 patients who have had the mandibular fractures including the facial bone fractures. And mandibular fractures were classified with respect to gender, age, site and type of the fractures. More frequently affected gender with mandibular fracture was male with the ratio of 3.3 : 1. The most frequently affected age with mandibular fracture was third decade (38%), followed by fourth decade (16%), second decade (15%), fifth decade (11%), sixth decade (7%), seventh decade (5%), eighth decade (4%), first decade (4%), and ninth decade (0.3%). The most frequent type of mandibular fracture was single fracture (58%), followed by double fracture (39%), triple fracture (3%). The most common site of mandibular fracture was mandibular condyle as 113 cases (27.7%) and the next was mandibular symphysis as 109 cases (26.7%), mandibular angle as 103 cases (25.3%), mandibular body as 83 cases (20.3%) in order. The sum of fracture sites were 408 sites and there were 1.4 fracture sites per one patient. The number of mandible fractures accompanied with facial bone fractures were 41 cases (14.4%). The results showed the most frequent type and common site of mandibular fracture was single fracture and mandibular condyle respectively.

Function impairment and pain after closed treatment of fractures of the mandibular condyle

NARCIS (Netherlands)

Dijkstra, P.U.; Stegenga, B.; de Bont, L.G.; Bos, R.R.

Background: To determine the prognosis of fractures of the mandibular condyle after closed treatment. Methods: Patients (n = 144) with a fracture of the mandibular condyle, all treated closed, were included in the study. Fracture types and position of the fracture parts were determined on

Use of an Implant O-Ring Attachment for the Tooth Supported Mandibular Overdenture: A Clinical Report

Science.gov (United States)

Guttal, Satyabodh S.; Tavargeri, Anand K.; Nadiger, Ramesh K.; Thakur, Srinath L.

2011-01-01

Retention of a mandibular denture can be achieved by an implant-retained or natural tooth-retained bar and stud attachment in the anterior segment of the mandible. The same design principles holds true for both implant-retained and tooth-retained methods of anchoring the bar and stud attachment. A simple and cost effective treatment for more complex implant overdenture is the concept of conventional tooth-retained overdentures. When few firm teeth still remain in a compromised dentition, preservation of these teeth for overdentures can improve retention and stability. The authors present a clinical report of a patient treated with a mandibular tooth-borne overdenture with bar and O-ring attachment. A splinted bar supported the prosthesis and an O-ring retained the denture. PMID:21769276

Use of an implant o-ring attachment for the tooth supported mandibular overdenture: a clinical report.

Science.gov (United States)

Guttal, Satyabodh S; Tavargeri, Anand K; Nadiger, Ramesh K; Thakur, Srinath L

2011-07-01

Retention of a mandibular denture can be achieved by an implant-retained or natural tooth-retained bar and stud attachment in the anterior segment of the mandible. The same design principles holds true for both implant-retained and tooth-retained methods of anchoring the bar and stud attachment. A simple and cost effective treatment for more complex implant overdenture is the concept of conventional tooth-retained overdentures. When few firm teeth still remain in a compromised dentition, preservation of these teeth for overdentures can improve retention and stability. The authors present a clinical report of a patient treated with a mandibular tooth-borne overdenture with bar and O-ring attachment. A splinted bar supported the prosthesis and an O-ring retained the denture.

The value of right lateral decubitus position to decrease artificial defect of cardiac anterior wall in 99Tcm-MIBI SPECT myocardial perfusion imaging for women

International Nuclear Information System (INIS)

Huang Kemin; Feng Yanlin; Wen Guanghua; Liang Weitang; Yu Fengwen; Liu Dejun

2013-01-01

Objective: To explore the value of right lateral decubitus position MPI for differentiating myocardial perfusion defect from cardiac anterior wall attenuation artificial defect, caused by breast of woman. Methods: Forty-nine patients(average age (61.5±8.4) years) who had low likelihood of coronary artery disease and had perfusion defect in the anterior wall after exercise stress 99 Tc m -MIBI MPI were included. All underwent supine and right lateral decubitus position during resting SPECT images. The myocardial perfusion SPECT images at left ventricle were reconstructed and were measured by Bull's-eye, based on the counts. Results from both supine position imaging and right lateral decubitus position imaging were compared. Paired t test was used to statistically analyse the data by SPSS 13.0. Results: Compared with supine position, the counts of the anterior, inferior, apex and lateral wall in right lateral decubitus position were significantly higher: (71.30±3.53)% vs (66.50±3.85)%, (70.06±4.45)% vs (65.44±4.16)%, (77.90±3.00)% vs (75.81±4.08)%,(79.30±2.26)% vs (72.60±3.87)% (t=6.731, 5.286, 3.555, 10.885, all P<0.01). The counts of septal wall were significantly lower ((66.60±3.98)% vs (70.06±4.51)%, t=-4.625, P<0.01) in right lateral decubitus position than that in supine position. Among the different regions of anterior wall, the counts of the anterior-middle ((76.40 ± 3.80)% vs (68.60 ± 4.76)%) and anterior-apex region ((77.10±3.24)% vs (69.00±3.54)%) were significantly higher (t=9.916, 8.870, both P<0.01) in right lateral decubitus position than those in supine position, but there was insignificance ((56.94±6.06)% vs (58.50±4.98)%, t=-1.493, P>0.05) at anterior-basal region. The artificial defect of different degrees in anterior wall was observed in all patients in supine position, 23 cases (46.9%, 23/49) showed artificial defect in the anterior-middle region and 16 cases (32.7%, 16/49) in the anterior-apex region. All artificial defect

[The effect of mandibular distraction on the maxilla growth in children with hemifacial microsomia].

Science.gov (United States)

Yang, Renkai; Tang, Xiaojun; Shi, Lei; Yin, Lin; Yang, Bin; Yin, Hongyu; Liu, Wei; Zhang, Zhiyong

2014-11-01

To analyze the effect of mandibular distraction on the maxilla growth in children with hemifacial microsomia through measurement with the posterior-anterior cephalometric X-ray films and Three-dimensional CT reconstruction images. The deviation angular of maxilla occlusion plane and nasal base plane from the infra-orbital plane were measured on the posterior-anterior cephalometric X-ray films in 22 patients before and half a year after operation. The vertical distance from the midpoint of 5th teeth alveolar and the lowest point of maxillary sinus to reference plane were measured on 3D reconstruction images in 15 patients. The data were statistically analyzed. On posterior-anterior cephalometric X-ray films, the cant of occlusion plane were significantly reduced (P maxillary sinus on normal side. Distraction osteogenesis of mandible can promote the growth of the maxilla in children with HFM, the accelerated growth parts include alveolar bone and maxillary sinus.

Modified protrusion arch for anterior crossbite correction - a case report.

Science.gov (United States)

Roy, Abhishek Singha; Singh, Gulshan Kr; Tandon, Pradeep; Chaudhary, Ramsukh

2013-01-01

Borderline and mild skeletal Class III relationships in adult patients are usually treated by orthodontic camouflage. Reasonably rood results have been achieved with nonsurgical teatment of anterior crossbite. Class III malocclusion may be associated with mandibular prognathism, maxillary retrognathism, or both. Class III maxillary retrognathism generally involves anterior crossbite, which must be opened if upper labial brackets are to be bonded. If multiple teeth are in crossbite, after opening the bite usual step is to ligate forward or advancement arch made of 0.018" or 0.020" stainless steel or NiTi wire main arch that must be kept separated 2 mm from the slot ofupper incisor braces. Two stops or omegas are made 1 mm mesial to the tubes of the molar bands that will impede main arch from slipping,and in this manner the arch will push the anterior teeth forward Here we have fabricated a modified multiple loop protrusion arch to correct an anterior crossbite with severe crowding that was not amenable to correct by advancement arches.

Visibility of the mandibular canal and the mental foramen in panoramic radiography

International Nuclear Information System (INIS)

Jeong, Seon Jin; Choi, Eui Hwan; Kim, Jae Duk

2001-01-01

To determine the head position that the superior border of the mandibular canal as well as mental foramen can be more clearly visualized in panoramic radiography. Ten dry mandibles were radiography bilaterally using PM 2002 CC panoramic machine. A 20 mm thick aluminium filter was added to the slit collimator to obtain radiographs with acceptable density. The specimens were tilted by 2, 4, 6, 8 and 10 degrees downward with and without radiopaque markers. Radiopaque markers were inserted into the mandibular canals and the mental canals of each side of the specimens to serve as reference image when assessing the radiographs. The obtained results were analyzed statistically. Mandibular canals were significantly more clearly visible in the radiographs with 4 and 6 degree downward position on both sides (P<0.05). Mental foramen were significantly more clearly visible in the was not significant difference between right and left sides. Panoramic radiographs with 4 to 6 degree downward tilting could be valuable in locating the mandibular canal as well as the mental foramen

Mandibular angle resection and masticatory muscle hypertrophy - a technical note and morphological optimization.

Science.gov (United States)

Andreishchev, A R; Nicot, R; Ferri, J

2014-11-01

Mandibular angle resection is rarely used, but is a highly effective means of correcting facial defects. We report a mandibular angle resection technique associated with the removal of a part of hypertrophic masseter muscles and resection of buccal fat pad. Anatomical reminders: the most important entities are the facial artery and vein, crossing the lower margin of the jaw just in front of the anterior boarder of the masseter muscle and the temporomaxillary vein, passing through the temporomaxillary fossa; preoperative aspects: the preoperative examination included a radiological assessment of the shape and size of the mandibular angle; surgical technique: an intra-oral approach was usually used. The most effective and convenient method for the osteotomy was using a reciprocating saw. This technique allowed achieving a smooth contour of masseter muscles during masticatory movements or at rest. Eleven mandibular angle resections were performed from 2001 to 2009. The surgery was supplemented by remodeling the lower margin of the jaw for 5 other patients. No permanent facial palsy was noted. One patient presented a unilateral long-term loss of sensitivity of the lower lip and chin. This surgical technique if simple even requires using good technical equipment, and observing a set of rules. Using these principles allows simplifying the surgical technique, and decreasing its morbidity. A part of the masseter muscles and the buccal fat pad can sometimes be resected to improve the morphological results. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Slightly flexed knee position within a standard knee coil: MR delineation of the anterior cruciate ligament

Energy Technology Data Exchange (ETDEWEB)

Niitsu, M.; Itai, Y. [Department of Radiology, Institute of Clinical Medicine, University of Tsukuba, Tennodai, Tsukuba, Ibaraki 305 (Japan); Ikeda, K. [Department of Orthopedic Surgery, Institute of Clinical Medicine, University of Tsukuba, Tennodai, Tsukuba, Ibaraki 305 (Japan)

1998-02-01

The purpose of this study was to assess the value of positioning the knee slightly flexed within a standard MR knee coil in delineation of the anterior cruciate ligament (ACL). Within the confined space of a commercially available knee coil, knee could bend as much as 30 , average 17 of flexion. Sets of oblique sagittal MR images were obtained at both fully extended and slightly flexed positions. Twenty-two normal knees and 18 knees with ACL tears were examined and paired MR images were evaluated by two observers. Compared with knee extension, the MR images for knee flexion provided better clarity in 57 % of reviews of full length of the ACL and 53 % of the femoral attachment. In the extended position the anterior margin of the ligament was obscured due to partial averaging with the intercondylar roof. We recommend examining the knee in an achievable flexed position within the standard knee coil. (orig.) With 3 figs., 1 tab., 6 refs.

Slightly flexed knee position within a standard knee coil: MR delineation of the anterior cruciate ligament

International Nuclear Information System (INIS)

Niitsu, M.; Itai, Y.; Ikeda, K.

1998-01-01

The purpose of this study was to assess the value of positioning the knee slightly flexed within a standard MR knee coil in delineation of the anterior cruciate ligament (ACL). Within the confined space of a commercially available knee coil, knee could bend as much as 30 , average 17 of flexion. Sets of oblique sagittal MR images were obtained at both fully extended and slightly flexed positions. Twenty-two normal knees and 18 knees with ACL tears were examined and paired MR images were evaluated by two observers. Compared with knee extension, the MR images for knee flexion provided better clarity in 57 % of reviews of full length of the ACL and 53 % of the femoral attachment. In the extended position the anterior margin of the ligament was obscured due to partial averaging with the intercondylar roof. We recommend examining the knee in an achievable flexed position within the standard knee coil. (orig.)

Expression of Slug in S100β-protein-positive cells of postnatal developing rat anterior pituitary gland.

Science.gov (United States)

Horiguchi, Kotaro; Fujiwara, Ken; Tsukada, Takehiro; Yako, Hideji; Tateno, Kozue; Hasegawa, Rumi; Takigami, Shu; Ohsako, Shunji; Yashiro, Takashi; Kato, Takako; Kato, Yukio

2016-02-01

Among heterogeneous S100β-protein-positive (S100β-positive) cells, star-like cells with extended cytoplasmic processes, the so-called folliculo-stellate cells, envelop hormone-producing cells or interconnect homophilically in the anterior pituitary. S100β-positive cells are known, from immunohistochemistry, to emerge from postnatal day (P) 10 and to proliferate and migrate in the parenchyma of the anterior pituitary with growth. Recent establishment of S100β-GFP transgenic rats expressing specifically green fluorescent protein (GFP) under the control of the S100β-promoter has allowed us to observe living S100β-positive cells. In the present study, we first confirmed that living S100β-positive cells in tissue cultures of S100β-GFP rat pituitary at P5 were present prior to P10 by means of confocal laser microscopy and that they proliferated and extended their cytoplasmic processes. Second, we examined the expression of the Snail-family zinc-finger transcription factors, Snail and Slug, to investigate the mechanism behind the morphological changes and the proliferation of S100β-positive cells. Interestingly, we detected Slug expression in S100β-positive cells and its increase together with development in the anterior pituitary. To analyze downstream of SLUG in S100β-positive cells, we utilized specific small interfering RNA for Slug mRNAs and observed that the expression of matrix metalloprotease (Mmp) 9, Mmp14 and chemokine Cxcl12 was down-regulated and that morphological changes and proliferation were decreased. Thus, our findings suggest that S100β-positive cells express Slug and that its expression is important for subsequent migration and proliferation.

COMPUTER-AIDED OPTIMIZATION OF CHOICE AND POSITIONING OF BONE PLATES AND SCREWS USED FOR INTERNAL-FIXATION OF MANDIBULAR FRACTURES

NARCIS (Netherlands)

ROZEMA, FR; BOS, RRM; BOERING, G; VANWILLIGEN, JD

1992-01-01

The present study describes a biomechanical integrated model of the mandibular system in which the maxilla and mandible, the masticatory muscles, and the temporomandibular joints are regarded as one system. In this model, strains in plate-osteosynthesis devices for internal fixation of mandibular

Experimental occlusal interferences. Part III. Mandibular rotations induced by a rigid interference.

Science.gov (United States)

Rassouli, N M; Christensen, L V

1995-10-01

A rigid intercuspal interference (minimum mean height of 0.24 mm) was placed on either the right or left mandibular second premolar and first molar of 12 subjects. During brisk and forceful biting on the interference, rotational electrognathography measured maximum torque of the right and left mandibular condyles in the frontal and horizontal planes of orientation. All subjects showed frontal plan upward rotation (mean of 0.7 degrees) of the mandibular condyle contralateral to the interference. In 33% of the subjects there was no horizontal plane backward rotation. In 58% of the subjects there was horizontal plane backward rotation (mean of 0.5 degrees) of the mandibular condyle ipsilateral to the interference, and in one subject (8%) there was backward horizontal plane rotation (0.1 degree) of the mandibular condyle contralateral to the interference. It was inferred that the masseter muscle, ipsilateral to the interference, generated negative work in order to decelerate frontal plane 'unseating' of the mandibular condyle ipsilateral to the interference. It was inferred that the masseter muscle, contralateral to the interference, produced positive work in order to accelerate frontal plane 'seating' of the mandibular condyle contralateral to the interference. Finally, it was speculated that the impact forces of frontal plane 'seating' of the mandibular condyle, contralateral to the interference, might lead to 'vacuum sticking' of the temporomandibular joint disc because of the formation of negative hydrostatic pressures.

Clinical and orthopantomographic evaluation of mandibular third molar

Directory of Open Access Journals (Sweden)

F K Saraswati

2010-01-01

Full Text Available Objective: To evaluate sensitivity of orthopentograph (OPG in assessing the number and morphology of roots of the mandibular third molar. Materials and Methods : The study population consisted of 100 ILTMs (impacted lower third molars ranging from 18 to 42 years with equal sex distribution. All the teeth were subsequently extracted , collected and compared with OPG features for position, numb,er, morphology, and relation to mandibular canal. Conclusion: In conclusion, a large sample study is suggested with techniques like Clark′s and right angle technique which determines the three-dimensional orientation of the impacted teeth.

Maxillary anterior en masse retraction using different antero-posterior position of mini screw: a 3D finite element study

Directory of Open Access Journals (Sweden)

Zohreh Hedayati

2016-10-01

Full Text Available Abstract Background Nowadays, mini screws are used in orthodontic tooth movement to obtain maximum or absolute anchorage. They have gained popularity among orthodontists for en masse retraction of anterior teeth after first premolar extraction in maximum anchorage cases. The purpose of this study was to determine the type of anterior tooth movement during the time when force was applied from different mini screw placements to the anterior power arm with various heights. Methods A finite element method was used for modeling maxillary teeth and bone structure. Brackets, wire, and hooks were also designed for modeling. Two appropriate positions for mini screw in the mesial and distal of the second premolar were designed as fixed nodes. Forces were applied from the mini screw to four different levels of anterior hook height: 0, 3, 6, and 9 mm. Initial tooth movement in eight different conditions was analyzed and calculated with ANSYS software. Results Rotation of anterior dentition was decreased with a longer anterior power arm and the mesial placement of the mini screw. Bodily movements occurred with the 9-mm height of the power arm in both mini screw positions. Intrusion or extrusion of the anterior teeth segment depended on the level of the mini screw and the edge of the power arm on the Z axis. Conclusions According to the findings of this study, the best control in the sagittal plane during anterior en masse retraction was achieved by mesial placement of the mini screw and the 9-mm height of the anterior power arm. Where control in the vertical plane was concerned, distal placement of the mini screw with the 6-mm power arm height had minimum adverse effect on anterior dentition.

Transverse maxillary and mandibular growth during and after bionator therapy: study with metallic implants.

Science.gov (United States)

Monini, André da Costa; Júnior, Luiz Gonzaga Gandini; Maia, Luiz Guilherme Martins; Pinto, Ary dos Santos

2013-01-01

This study evaluated posteroanterior cephalograms before and after treatment and long term follow-up of Class II division 1 patients treated with bionator. The objective was to demonstrate the transverse growth of maxilla and mandible during and after bionator therapy. Measurement of transverse dimensions between posterior maxillary and mandibular implants, as well as the distances between the buccal, gonial and antegonial points were recorded. Measurements were analyzed at three periods: T1 - before bionator therapy, T2 - after bionator therapy and T3 - 5.74 years after T2. There was statistically significant transverse increase due to growth and/or treatment for all variables, except for the distance between the anterior maxillary implants. During the study period only the anterior maxillary area did not show transverse growth.

Clinical Efficiency of Two Sequences of Orthodontic Wires to Correct Crowding of the Lower Anterior Teeth

Directory of Open Access Journals (Sweden)

Cláudia Maria de Castro Serafim

2015-01-01

Full Text Available This study compared time to correction of mandibular anterior crowding using two arch wire sequences, one with conventional nickel-titanium (NiTi arch wires and the other with conventional and NiTi heat-activated arch wires. Twenty-two boys and girls (mean age: 16.68 ± 2.66 with moderate crowding (3–6 mm were assigned randomly to one of two groups and followed up for five months (six assessments when arch wires were changed. Time to crowding correction was analyzed statistically using the Kaplan-Meier method. Data were collected during the five-month follow-up, and time to correction was compared between groups using the log rank test. At the end of follow-up, mandibular crowding was corrected in 100% of the cases in the group treated with the sequence that included NiTi heat-activated arch wires, whereas about 30% of those treated with NiTi arch wires were not completely corrected. There was a significant difference in time to complete treatment between groups (log rank = 5.996; p<0.05. In the group treated with the sequence that included heat-activated wires, alignment and leveling of mandibular anterior teeth were completed earlier than in the group treated only with conventional NiTi arch wires. Clinical trial registration is found at RBR-7g5zng.

Complaints related to mandibular function impairment after closed treatment of fractures of the mandibular condyle

NARCIS (Netherlands)

Niezen, E. T.; Bos, R. R. M.; de Bont, L. G. M.; Stegenga, B.; Dijkstra, P. U.

This study analysed the relationship between complaints and mandibular function after closed treatment of fractures of the mandibular condyle in a prospective study. In a I-year follow-up, complaints were assessed during physical examination and function was assessed using the mandibular function

Signaling pathways regulating the expression of Prx1 and Prx2 in the Chick Mandibular Mesenchyme

Science.gov (United States)

Doufexi, Aikaterini-El; Mina, Mina

2009-01-01

Prx1 and Prx2 are members of the aristaless-related homeobox genes shown to play redundant but essential roles in morphogenesis of the mandibular processes. To gain insight into the signaling pathways that regulate expression of Prx genes in the mandibular mesenchyme, we used the chick as a model system. We examined the patterns of gene expression in the face and the roles of signals derived from the epithelium on the expression of Prx genes in the mandibular mesenchyme. Our results demonstrated stage-dependent roles of mandibular epithelium on the expression of Prx in the mandibular mesenchyme and provide evidence for positive roles of members of the fibroblast and hedgehog families derived from mandibular epithelium on the expression of Prx genes in the mandibular mesenchyme. Our studies suggest that endothelin-1 signaling derived from the mesenchyme is involved in restricting the expression of Prx2 to the medial mandibular mesenchyme. PMID:18942149

Mastication markedly affects mandibular condylar cartilage growth, gene expression, and morphology.

Science.gov (United States)

Enomoto, Akiko; Watahiki, Junichi; Nampo, Tomoki; Irie, Tarou; Ichikawa, Yuuta; Tachikawa, Tetsuhiko; Maki, Koutaro

2014-09-01

Mandibular growth is believed to be strongly related to mastication. Furthermore, mandibular condylar cartilage is known to be derived from neural crest cells. We examined whether the degree of chewing affects condylar cartilage growth of the mandible. Mice were fed diets with varying hardness. Genes specific to neural crest-derived cells were measured by real-time polymerase chain reaction to compare the expression changes between the mandibular and tibia cartilages. The mandibular condylar cartilage was then evaluated histologically, and proliferation was evaluated using proliferating cell nuclear antigen. Immunostaining was conducted for osteopontin, type X collagen, and Musashi1, and real-time polymerase chain reaction was used to assess the expression levels of osteopontin and type X collagen. Markers including P75, Wnt-1, Musashi1, and Nestin were upregulated in the mandibular condylar cartilage as compared with the tibial cartilage. Histologic assessment of the mandibular cartilage showed that the hypertrophic chondrocyte zone was statistically significantly thicker in mice fed a hard diet. Chondrocyte proliferation and Musashi1 expression were lower in mice fed a hard diet. After 4 weeks, numerous osteopontin and type X collagen-positive cells were observed in mice fed a mixed diet. Mastication affects the balance between differentiation and proliferation in the mandibular condylar cartilage. This phenomenon might be attributed to the presence of neural crest-derived cells. Copyright © 2014 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Modified mandibular splint therapy for disc displacement with reduction of the temporomandibular joint

Directory of Open Access Journals (Sweden)

Ju-Hui Wu

2013-03-01

Full Text Available Occlusal splints are a standard method to treat disc displacement with reduction of the temporomandibular joint (TMJ. They can be classified into three major groups on the basis of function: stabilization splints, distraction splints (pivot, and anterior repositioning splints. The aim of this paper is to introduce a modified mandibular splint, the Kaohsuing Medical University splint, and its associated treatment regimen for management of disc displacement with reduction of the TMJ. The key points for fabrication of the KMU splint include the occlusal surface of the mandibular splint must be indented and average bite elevation 1.5 mm vertically. The patient should wear it 24 hours a day for the first 4 weeks, then wear it while eating and sleeping for the next 2 weeks, and wear it only while sleeping for the last 2 weeks. Patients must understand that the success of treatment depends on their compliance with the regimen.

3-Dimensional Reproducibility of Natural Head Position

Science.gov (United States)

2012-04-12

the “Six Elements to Orofacial Harmony”. He advocated using his Element II Analysis with natural head orientation for treatment planning, since “it...temporomandibular disorders, neck pain , headache, dentofacial structures, mandibular length, mandibular position, mandibular divergency and overjet (Cuccia, 2009

Evaluation of mandibular posterior single implants with two different surfaces: a 5-year comparative study.

Science.gov (United States)

Jung, Ui-Won; Choi, Jung-Yoo; Kim, Chang-Sung; Cho, Kyoo-Sung; Chai, Jung-Kiu; Kim, Chong-Kwan; Choi, Seong-Ho

2008-10-01

Anatomic and biomechanical limitations can jeopardize successful single implantation in the mandibular posterior area. To overcome the limitations, the design and the surface of the fixtures were modified. This study evaluated the cumulative survival rate (CSR) of mandibular molars replaced with a sand-blasted, large-grit, acid-etched (SLA) single implant or an anodized (ANO) single implant and examined associated factors, such as the surface treatment, position, and length and diameter of the implants. One hundred ninety-three single implants restored with an SLA implant and 112 single implants restored with an ANO implant in the mandibular molar area were selected from subjects who had visited the Department of Periodontology, Dental Hospital of Yonsei University, from March 2001 through June 2006. In the SLA group, 123 and 70 implants were placed in the first and second molar area, respectively. In the ANO group, 55 and 57 implants were placed in the first and second molar area, respectively. The 1- to 6-year CSR of the SLA and ANO groups was calculated using the life-table analysis. In addition, associated factors, such as the surface treatment, position, and length and diameter of the implants, were compared and analyzed using the chi(2) test (P CSR of 98.96%; four of 112 ANO implants failed, giving a CSR of 96.43%. There were no significant differences with regard to the surface treatment, position, and length and diameter of the implants. Despite the anatomic and biomechanical limitation in the mandibular posterior area, mandibular posterior single implants showed a high CSR during the observation period. Mandibular posterior single implants can be an effective and reliable treatment modality that is not affected by the surface treatment, position, or length and diameter of the implant.

Lingual mandibular osteonecrosis after dental impressions for orthodontic study models.

Science.gov (United States)

Cerruto, Carmen; Ugolini, Alessandro; Cozzani, Mauro

2018-03-01

A 43-year-old man sought orthodontic treatment to close anterior diastemas. During the impression procedure for routine documentation, the orthodontic assistant exerted excessive pressure on the metallic tray; 2 days later, the patient reported the detachment of a small piece of mucosa overlying the mylohyoid crest and was referred to a maxillofacial surgeon with a diagnosis of lingual mandibular osteonecrosis. The etiology of bony osteonecrosis is discussed, together with the anatomic variations that can be present in the basal bone and that must be carefully checked before an impression is taken. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Radiological classification of mandibular fractures

International Nuclear Information System (INIS)

Mihailova, H.

2009-01-01

Mandibular fractures present the biggest part (up to 97%) of the facial bone fractures. Method of choice for diagnosing of mandibular fractures is conventional radiography. The aim of the issue is to present an unified radiological classification of mandibular fractures for the clinical practice. This classification includes only those clinical symptoms of mandibular fracture which could be radiologically objectified: exact anatomical localization (F1-F6), teeth in fracture line (Ta,Tb), grade of dislocation (D I, D II), occlusal disturbances (O(+), O(-)). Radiological symptoms expressed by letter and number symbols are systematized in a formula - FTDO of mandibular fractures similar to TNM formula for tumours. FTDO formula expresses radiological diagnose of each mandibular fracture but it doesn't include neither the site (left or right) of the fracture, nor the kind and number of fractures. In order to express topography and number of fractures the radiological formula is transformed into a decimal fraction. The symbols (FTD) of right mandible fracture are written in the numerator and those of the left site - in the denominator. For double and multiple fractures between the symbols for each fracture we put '+'. Symbols for occlusal disturbances are put down opposite, the fractional line. So topographo-anatomical formula (FTD/FTD)xO is formed. In this way the whole radiological information for unilateral, bilateral, single or multiple fractures of the mandible is expressed. The information in the radiological topography anatomic formula, resp. from the unified topography-anatomic classification ensures a quick and exact X-ray diagnose of mandibular fracture. In this way contributes to get better, make easier and faster X-ray diagnostic process concerning mandibular fractures. And all these is a precondition for prevention of retardation of the diagnosis mandibular fracture. (author)

Evaluation of post-surgical relapse after mandibular setback surgery with minimal orthodontic preparation.

Science.gov (United States)

Lee, Nam-Ki; Kim, Young-Kyun; Yun, Pil-Young; Kim, Jong-Wan

2013-01-01

The aim of this study was to evaluate of the patterns of post-surgical relapse after mandibular setback surgery with minimal orthodontic preparation (MS-MO). The subjects consisted of 15 patients with minimal pre-surgical orthodontic preparation (1.37 ± 1.69 months). Lateral cephalograms were taken in pre-surgical (T0), post-surgical 1 month (T1) and immediately after debonding (T2) stages. To evaluate the surgical changes (T1-T0) and the relapse (T2-T1), the linear and angular measurements were analyzed using paired t-test. Pearson's correlation coefficients of the horizontal and vertical relapses of Pog and Me to other measurements were calculated. Pog or Me in T1 were displaced rotationally on Ar-Pog or Ar-Me lines in T2 to evaluate the remaining surgical relapse except the rotational relapse from total relapse. The mandible relapsed anteriorly 3.53 mm (Pog) and 4.00 mm (Me) and superiorly 2.72 mm (Pog) and 2.44 mm (Me). FH to Ar-Pog and FH to Ar-Me decreased by about 2°. Pure surgical relapses at Pog and Me, except rotational relapses, were about 0.5 mm anteriorly and inferiorly 0.8 mm. The vertical relapse might induce mandibular rotation with the horizontal relapse. For an accurate prediction after MS-MO, the rotational relapse might be considered. Crown Copyright © 2012. Published by Elsevier Ltd. All rights reserved.

Transverse maxillary and mandibular growth during and after Bionator therapy: study with metallic implants

Directory of Open Access Journals (Sweden)

André da Costa Monini

2013-06-01

Full Text Available INTRODUCTION: This study evaluated posteroanterior cephalograms before and after treatment and long term follow-up of Class II division 1 patients treated with bionator. OBJECTIVE: The objective was to demonstrate the transverse growth of maxilla and mandible during and after bionator therapy. METHODS: Measurement of transverse dimensions between posterior maxillary and mandibular implants, as well as the distances between the buccal, gonial and antegonial points were recorded. Measurements were analyzed at three periods: T1 = before bionator therapy, T2 = after bionator therapy and T3 = 5.74 years after T2. RESULTS: There was statistically significant transverse increase due to growth and/or treatment for all variables, except for the distance between the anterior maxillary implants. CONCLUSIONS: During the study period only the anterior maxillary area did not show transverse growth.

Impact of balancing-side tooth contact on clenching induced mandibular displacements in humans.

Science.gov (United States)

Baba, K; Yugami, K; Yaka, T; Ai, M

2001-08-01

This study investigated mandibular displacements during clenching in the lateral mandibular position in relation to lateral occlusal relationships. Twelve healthy human subjects (mean=26.7 years) volunteered for this study. Acrylic occlusal devices were fabricated for the lower working-side canine, working-side second molar and balancing-side second molar in order to simulate a dominant canine guidance, working-side interference (WI), balancing-side interference (BI) and bilateral balanced occlusion (BO). Vertical displacements of the mandible were recorded by linear variable differential transformers during submaximal clenching in the right lateral position. The four experimental occlusal conditions were revealed to have a significant effect on mandibular displacement patterns (ANOVA, P experimental conditions. These results suggest that the nature of reaction forces at the temporomandibular (TM) joints caused by the elevation of the mandible varies in a predictable manner depending upon lateral occlusal relationships.

Position and stability of the mandibular incisors after rapid maxillary expansion

Directory of Open Access Journals (Sweden)

Darcy Flávio Nouer

Full Text Available Objective: To make a cephalometric evaluation of the position and stability of the mandibular incisors immediately after rapid maxillaryexpansion and after a containment period of five months. Methods: The sample consisted of 21 schoolchildren, aged between 6 years and 11 months and 11 years, with mixed dentition, posterior reverse articulation (posterior cross bite, and erupted permanent first molars. The children were randomly divided into two groups: Group1 (composed of eleven children, in whom the encapsulated rapid maxilla expander was used, and Group 2 (composed of ten children, inwhom the conventional Hyrax expander was used. Three lateral teleradiographs of each individual were taken: before treatment, after rapid maxillary expansion, and after a containment period of five months. The cephalometric measurements used for analyzing the incisors were: /1.NB, /1-NB, /1-Line I, IMPA and /1-Jr. The data were submitted to the Dalhberg test, to calculate the error of repeatability, and to ANOVA (p<0.05. Results: The result showed significant difference between the adopted mechanics, but showed no difference between the initial measures, those after rapid expansion of the maxilla and final measures for all the distances, except for /1-Jr. Conclusion: Rapid maxillary expansion, using the encapsulated appliance or Hyrax, caused no significant alteration in the distances: /1.NB, /1-NB, /1-Line I, IMPA; before, after rapid maxillary expansion and after containment.

[Exploring a new method for superimposition of pre-treatment and post-treatment mandibular digital dental casts in adults].

Science.gov (United States)

Dai, F F; Liu, Y; Xu, T M; Chen, G

2018-04-18

. The lateral cephalogram-based mandibular digital dental cast superimposition method has the similar accuracy as the CBCT-based mandibular digital dental cast superimposition method in 3D evaluation of mandibular orthodontic tooth displacement, except for minor differences for the transverse displacements of anterior teeth. This method is applicable to adult patients with conventional orthodontic treatment records, especially the previous precious orthodontic data in the absence of CBCT scans.

A study of the eruption of the mandibular first permanent molar

OpenAIRE

河野, 美砂子; Kohno, Misako

1995-01-01

The object of this study was to know what positional changes of the mandibular first permanent molars occur just before their gingival emergence. The eruptive process of the mandibular first molars was investigated during the period from alveolareruption to preoraleruption. The subjects were 14 patients whose second primary molars were prematurely lost in one side and remained on the other side. Longitudinal oblique cephalograms were used to estimate the eruptive process of the first molars o...

Comparative Study of Mandibular Morphology in Patients with Hypodivergent and Hyperdivergent Growth Patterns: A Cephalometric Study

Directory of Open Access Journals (Sweden)

Roopa Sidde Gowda

2013-01-01

Materials and methods: As sample of 60 subjects in the age group of 12 to 18 years were selected, out of them 20 subjects were average growing patients, 20 subjects were hypodivergent patterns and 20 subjects were hyperdivergent patterns. Bjork′s signs of mandibular rotation were used to differentiate between them. Mandibular morphological differences were exhibited by the hypodivergent and hyperdivergent groups. Results and conclusion: According to the results, condylar head is inclined more backwardly in hyperdivergent patterns and more forwardly in hypodivergent pattern. Inferior border of mandible has a notched appearance in hyperdivergent and is almost flat in hypodivergent patterns. Anterior lower facial height is increased in hyperdivergent and decreased in hypodivergent patterns. Interincisal and intermolar angles are more mesially inclined in hyperdivergent than hypodivergent patterns. Symphysis is more forwardly inclined in case of hypodivergent and backwardly inclined in hyperdivergent patterns.

Overview of Mandibular Condyle Fracture

Directory of Open Access Journals (Sweden)

Su-Seong Park

2012-07-01

Full Text Available The mandibular condyle is a region that plays a key role in the opening and closing ofthe mouth, and because fracture causes functional and aesthetic problems such as facialasymmetry, it is very important to perform accurate reduction. Traditionally, there has beendisagreement on how to manage fracture of the mandibular condyle. This review exploresthe misunderstanding of mandibular condyle fracture treatment and modern-day treatmentstrategies.

[Intra-articular injections of hyaluronic acid for anterior disc displacement of temporomandibular joint].

Science.gov (United States)

Long, X

2017-03-09

Anterior disc displacement (ADD) of temporomandibular joint (TMJ) is regarded as one of the major findings in temporomandibular disorders (TMD). It is related to joint noise, pain, mandibular dysfunction, degenerative change and osteoarthritis. In the mean time, the pathological changes were found in synovial membrane and synovial fluid. Hyaluronic acid is a principal component of the synovial fluid which plays an important role in nutrition, lubrication, anti-inflammation and cartilage repair. The synthesis, molecule weight, and concentration of hyaluronic acid are decreased during TMD and cause TMJ degenerative changes. The clinical conditions, pathological changes, the mechanism of action for hyaluronic acid and the treatment of anterior disc displacement of TMJ are discussed in this article.

Deoxycholic Acid and the Marginal Mandibular Nerve: A Cadaver Study.

Science.gov (United States)

Blandford, Alexander D; Ansari, Waseem; Young, Jason M; Maley, Bruce; Plesec, Thomas P; Hwang, Catherine J; Perry, Julian D

2018-06-04

One of the rare but serious complications observed with deoxycholic acid administration is damage to the marginal mandibular nerve. In this study, we evaluated if deoxycholic acid directly induces histologic damage to fresh cadaveric marginal mandibular nerve. A segment of marginal mandibular nerve was harvested from 12 hemifaces of 6 fresh cadavers. The nerve specimen was exposed to either 0.9% sterile saline for 24 h, deoxycholic acid (10 mg/ml) for 20 min, or deoxycholic acid (10 mg/ml) for 24 h. The nerve specimens were then fixed in glutaraldehyde for a minimum of 24 h. Toluidine blue stained sections were evaluated for stain intensity using light microscopy and color deconvolution image analysis. Supraplatysmal fat was harvested as a positive control and exposed to the same treatments as the marginal mandibular nerve specimens, then evaluated using transmission electron microscopy. Toluidine blue staining was less in the marginal mandibular nerve exposed to deoxycholic acid when compared to saline. The specimen exposed to deoxycholic acid for 24 h showed less toluidine blue staining than that of the nerve exposed to deoxycholic acid for 20 min. Transmission electron microscopy of submental fat exposed to deoxycholic acid revealed disruption of adipocyte cell membrane integrity and loss of cellular organelles when compared to specimens only exposed to saline. Deoxycholic acid (10 mg/ml) damages the marginal mandibular nerve myelin sheath in fresh human cadaver specimens. Direct deoxycholic acid neurotoxicity may cause marginal mandibular nerve injury clinically. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Overview of Mandibular Condyle Fracture

OpenAIRE

Park, Su-Seong; Lee, Keun-Cheol; Kim, Seok-Kwun

2012-01-01

The mandibular condyle is a region that plays a key role in the opening and closing of the mouth, and because fracture causes functional and aesthetic problems such as facial asymmetry, it is very important to perform accurate reduction. Traditionally, there has been disagreement on how to manage fracture of the mandibular condyle. This review explores the misunderstanding of mandibular condyle fracture treatment and modern-day treatment strategies.

Overview of Mandibular Condyle Fracture

Directory of Open Access Journals (Sweden)

Su-Seong Park

2012-07-01

Full Text Available The mandibular condyle is a region that plays a key role in the opening and closing of the mouth, and because fracture causes functional and aesthetic problems such as facial asymmetry, it is very important to perform accurate reduction. Traditionally, there has been disagreement on how to manage fracture of the mandibular condyle. This review explores the misunderstanding of mandibular condyle fracture treatment and modern-day treatment strategies.

Use of an Implant O-Ring Attachment for the Tooth Supported Mandibular Overdenture: A Clinical Report

OpenAIRE

Guttal, Satyabodh S.; Tavargeri, Anand K.; Nadiger, Ramesh K.; Thakur, Srinath L.

2011-01-01

Retention of a mandibular denture can be achieved by an implant-retained or natural tooth-retained bar and stud attachment in the anterior segment of the mandible. The same design principles holds true for both implant-retained and tooth-retained methods of anchoring the bar and stud attachment. A simple and cost effective treatment for more complex implant overdenture is the concept of conventional tooth-retained overdentures. When few firm teeth still remain in a compromised dentition, pres...

Relationship between fracture of mandibular condyle and absence of unerupted mandibular third molar-a retrospective study.

Science.gov (United States)

Rajan, Ritesh; Verma, Dinesh Kumar; Borle, R M; Yadav, Abhilasha

2016-06-01

The purpose of the present study was to find, if there exists, a co-relation between presence of unerupted mandibular third molar and fracture of mandibular condyle. A retrospective, multicenter study was done collecting the data of all mandibular condyle fractures treated from November 2006 till August 2015. Data was collected from the patient's records and radiographs for the following information: age, sex, etiology of fracture, presence and state of lower third molars, and associated fracture. The results were subjected to statistical analysis. Out of 180 patients of condylar fracture, unerupted third molars were present in 35 (19.44 %) cases compared to 145 (80.55 %) cases of condylar fracture where the unerupted third molars were not present. The difference was statistically significant (p fracture was seen in 4 (11.4 %) cases, bilateral condylar fracture associated with other mandibular fractures in 9 (25.7 %) cases, isolated unilateral condylar fracture in 0 (0.0 %) cases, and unilateral condylar fracture associated with other mandibular fractures in 17 (48.5 %) cases and condylar fracture associated with mid face fractures in 5 (14.2 %) cases. In the unerupted third molar absent group, isolated bilateral condylar fracture was seen in 5 (3.4 %) cases, bilateral condylar fracture associated with other mandibular fractures in 30 (20.6 %) cases, isolated unilateral condylar fracture in 24 (16.5 %) cases, unilateral condylar fracture associated with other mandibular fractures in 73 (50.34 %) cases, and condylar fracture associated with mid face fractures in 13(8.96 %) cases. The difference between the groups was statistically significant (p = 0.032). This study suggests that the fractures of mandibular condylar region have a significantly higher incidence in patients without an unerupted mandibular third molar.

Preliminary optical coherence tomography investigation of the temporo-mandibular joint disc

Science.gov (United States)

Mărcăuteanu, Corina; Demjan, Enikö; Sinescu, Cosmin; Negrutiu, Meda; Motoc, Adrian; Lighezan, Rodica; Vasile, Liliana; Hughes, Mike; Bradu, Adrian; Dobre, George; Podoleanu, Adrian G.

2010-02-01

Aim and objectives. The morphology and position of the temporo-mandibular disc are key issues in the diagnosis and treatment of arthrogenous temporo-mandibular disorders. Magnetic resonance imaging and arthroscopy are used today to identify: flattening of the pars posterior of the disc, perforation and/or adhesions in the pars intermedia of the disc and disc displacements. The present study proposes the investigation of the temporo-mandibular joint disc by optical coherence tomography (OCT). Material and methods. 8 human temporo-mandibular joint discs were harvested from dead subjects, under 40 year of age, and conserved in formalin. They had a normal morphology, with a thicker pars posterior (2,6 mm on the average) and a thinner pars intermedia (1mm on the average). We investigated the disc samples using two different OCT systems: an en-face OCT (time domain (TD)-OCT) system, working at 1300 nm (C-scan and B-scan mode) and a spectral OCT system (a Fourier domain (FD)-OCT) system , working at 840 nm (B-scan mode). Results. The OCT investigation of the temporo-mandibular joint discs revealed a homogeneous microstructure. The longer wavelength of the TD-OCT offers a higher penetration depth (2,5 mm in air), which is important for the analysis of the pars posterior, while the FD-OCT is much faster. Conclusions: OCT is a promising imaging method for the microstructural characterization of the temporo-mandibular disc.

Size, shape and age-related changes of the mandibular condyle during childhood

Energy Technology Data Exchange (ETDEWEB)

Karlo, Christoph A. [University Children' s Hospital Zurich, Department of Diagnostic Imaging, Zurich (Switzerland); University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland); Stolzmann, Paul [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland); Habernig, Sandra; Kellenberger, Christian J. [University Children' s Hospital Zurich, Department of Diagnostic Imaging, Zurich (Switzerland); Mueller, Lukas [University of Zurich, Clinics for Orthodontics and Paediatric Dentistry, Zurich (Switzerland); Saurenmann, Traudel [University Children' s Hospital Zurich, Department of Rheumatology, Zurich (Switzerland)

2010-10-15

To determine age-related differences in the size and shape of the mandibular condyle in children to establish anatomical reference values. A total of 420 mandibular condyles in 210 children (mean age, 7 years) were retrospectively analysed by using computed tomography (CT) imaging. The greatest left-right (LRD) and anterior-posterior (APD) diameters and the anteversion angles (AA) were measured by two readers. An APD/LRD ratio was calculated. The shape of the condyles was graded into three types on sagittal images. Correlations of parameters with the children's age were assessed by using Pearson's correlation analyses. The LRD (mean, 14.1 {+-} 2.4 mm), APD (mean, 7.3 {+-} 1.0 mm) and LRD/APD ratio (mean, 1.9 {+-} 0.3) increased (r{sub LRD} = 0.70, p < 0.01; r{sub APD} = 0.56, p < 0.01; r{sub rat} = 0.28, p < 0.01) while the AA (mean, 27 {+-} 7 ) decreased significantly (r{sub antang} = -0.26, p < 0.001) with age. The condylar shape as determined on sagittal images correlated significantly with age (r = 0.69, p < 0.05). Boys had significantly higher anteversion angles (p < 0.01), greater LRDs (p < 0.05) and greater mean ratios (p < 0.05). The mandibular condyle is subject to significant age-related changes in size and shape during childhood. As the size of the condyles increases with age, the anteversion angles decrease and the shape of the condyle turns from round to oval. (orig.)

Anterior ankle arthroscopy, distraction or dorsiflexion?

Science.gov (United States)

de Leeuw, Peter A J; Golanó, Pau; Clavero, Joan A; van Dijk, C Niek

2010-05-01

Anterior ankle arthroscopy can basically be performed by two different methods; the dorsiflexion- or distraction method. The objective of this study was to determine the size of the anterior working area for both the dorsiflexion and distraction method. The anterior working area is anteriorly limited by the overlying anatomy which includes the neurovascular bundle. We hypothesize that in ankle dorsiflexion the anterior neurovascular bundle will move away anteriorly from the ankle joint, whereas in ankle distraction the anterior neurovascular bundle is pulled tight towards the joint, thereby decreasing the safe anterior working area. Six fresh frozen ankle specimens, amputated above the knee, were scanned with computed tomography. Prior to scanning the anterior tibial artery was injected with contrast fluid and subsequently each ankle was scanned both in ankle dorsiflexion and in distraction. A special device was developed to reproducibly obtain ankle dorsiflexion and distraction in the computed tomography scanner. The distance between the anterior border of the inferior tibial articular facet and the posterior border of the anterior tibial artery was measured. The median distance from the anterior border of the inferior tibial articular facet to the posterior border of the anterior tibial artery in ankle dorsiflexion and distraction was 0.9 cm (range 0.7-1.5) and 0.7 cm (range 0.5-0.8), respectively. The distance in ankle dorsiflexion significantly exceeded the distance in ankle distraction (P = 0.03). The current study shows a significantly increased distance between the anterior distal tibia and the overlying anterior neurovascular bundle with the ankle in a slightly dorsiflexed position as compared to the distracted ankle position. We thereby conclude that the distracted ankle position puts the neurovascular structures more at risk for iatrogenic damage when performing anterior ankle arthroscopy.

Anterior cingulate activation is related to a positivity bias and emotional stability in successful aging.

Science.gov (United States)

Brassen, Stefanie; Gamer, Matthias; Büchel, Christian

2011-07-15

Behavioral studies consistently reported an increased preference for positive experiences in older adults. The socio-emotional selectivity theory explains this positivity effect with a motivated goal shift in emotion regulation, which probably depends on available cognitive resources. The present study investigates the neurobiological mechanism underlying this hypothesis. Functional magnetic resonance imaging data were acquired in 21 older and 22 young subjects while performing a spatial-cueing paradigm that manipulates attentional load on emotional face distracters. We focused our analyses on the anterior cingulate cortex as a key structure of cognitive control of emotion. Elderly subjects showed a specifically increased distractibility by happy faces when more attentional resources were available for face processing. This effect was paralleled by an increased engagement of the rostral anterior cingulate cortex, and this frontal engagement was significantly correlated with emotional stability. The current study highlights how the brain might mediate the tendency to preferentially engage in positive information processing in healthy aging. The finding of a resource-dependency of this positivity effect suggests demanding self-regulating processes that are related to emotional well-being. These findings are of particular relevance regarding implications for the understanding, treatment, and prevention of nonsuccessful aging like highly prevalent late-life depression. Copyright © 2011 Society of Biological Psychiatry. Published by Elsevier Inc. All rights reserved.

Mandibular canine intrusion with the segmented arch technique: A finite element method study.

Science.gov (United States)

Caballero, Giselle Milagros; Carvalho Filho, Osvaldo Abadia de; Hargreaves, Bernardo Oliveira; Brito, Hélio Henrique de Araújo; Magalhães Júnior, Pedro Américo Almeida; Oliveira, Dauro Douglas

2015-06-01

Mandibular canines are anatomically extruded in approximately half of the patients with a deepbite. Although simultaneous orthodontic intrusion of the 6 mandibular anterior teeth is not recommended, a few studies have evaluated individual canine intrusion. Our objectives were to use the finite element method to simulate the segmented intrusion of mandibular canines with a cantilever and to evaluate the effects of different compensatory buccolingual activations. A finite element study of the right quadrant of the mandibular dental arch together with periodontal structures was modeled using SolidWorks software (Dassault Systèmes Americas, Waltham, Mass). After all bony, dental, and periodontal ligament structures from the second molar to the canine were graphically represented, brackets and molar tubes were modeled. Subsequently, a 0.021 × 0.025-in base wire was modeled with stainless steel properties and inserted into the brackets and tubes of the 4 posterior teeth to simulate an anchorage unit. Finally, a 0.017 × 0.025-in cantilever was modeled with titanium-molybdenum alloy properties and inserted into the first molar auxiliary tube. Discretization and boundary conditions of all anatomic structures tested were determined with HyperMesh software (Altair Engineering, Milwaukee, Wis), and compensatory toe-ins of 0°, 4°, 6°, and 8° were simulated with Abaqus software (Dassault Systèmes Americas). The 6° toe-in produced pure intrusion of the canine. The highest amounts of periodontal ligament stress in the anchor segment were observed around the first molar roots. This tooth showed a slight tendency for extrusion and distal crown tipping. Moreover, the different compensatory toe-ins tested did not significantly affect the other posterior teeth. The segmented mechanics simulated in this study may achieve pure mandibular canine intrusion when an adequate amount of compensatory toe-in (6°) is incorporated into the cantilever to prevent buccal and lingual crown

Maxillary Anterior Segmental Distraction Osteogenesis to Correct Maxillary Deficiencies in a Patient With Cleft Lip and Palate.

Science.gov (United States)

Kageyama-Iwata, Asuka; Haraguchi, Seiji; Iida, Seiji; Aikawa, Tomonao; Yamashiro, Takashi

2017-07-01

This report describes a case of successful orthodontic treatment using maxillary anterior segmental distraction osteogenesis with an internal maxillary distractor and bilateral sagittal split ramus osteotomy in a girl with cleft lip and palate. A 16-year-old girl with unilateral cleft lip and palate exhibited midface retrusion because of growth inhibition of the maxillary complex and mandibular excess. After the presurgical orthodontic treatment, 6.0-mm advancement of the maxillary anterior segment and 4.0-mm set back of the mandible were performed. After a retention period, the patient's midface convexity was greatly improved and the velopharyngeal competence was preserved without relapse.

Intraosseous vascular access through the anterior mandible--a cadaver model pilot study.

Directory of Open Access Journals (Sweden)

Christin Goldschalt

Full Text Available BACKGROUND: Several insertion sites have been described for intraosseous puncture in cases of emergencies when a conventional vascular access cannot be established. This pilot study has been designed to evaluate the feasibility of the mandibular bone for the use of an intraosseous vascular access in a cadaver model. METHODOLOGY/PRINCIPAL FINDINGS: 17 dentistry and 16 medical students participating in a voluntary course received a short introduction into the method and subsequently used the battery powered EZ-IO system with a 15 mm cannula for a puncture of the anterior mandible in 33 cadavers. The time needed to perform each procedure was evaluated. India ink was injected into the accesses and during the anatomy course cadavers were dissected to retrace the success or failure of the puncture. Dental students needed 25.5±18.9(mean±standard deviations and medical students 33±20.4 s for the procedure (p = 0.18. Floor of mouth extravasation occurred in both groups in 3 cases. Success rates were 82 and 75% (p = 0.93. CONCLUSIONS/SIGNIFICANCE: Despite floor of mouth extravasation of injected fluid into a mandibular intraosseous access might severely complicate this procedure, the anterior mandible may be helpful as an alternative to other intraosseous and intravenous insertion sites when these are not available in medical emergencies.

Marginal mandibular branch of the facial nerve: An anatomical study

Directory of Open Access Journals (Sweden)

Ayman Ahmad Khanfour

2014-06-01

Results: Results showed that the (MMBFN arises as a single branch, two branches, and three branches in 36.7%, 43.3% and 20% of specimens, respectively. In 83.3% of cases, one of the main or secondary branches of the marginal mandibular nerve crosses superficial (lateral to the facial vessels. There are communications either between the main or the secondary branches of the marginal mandibular nerve itself in 53.6% of specimens and with the buccal branch of the facial nerve in 40%, also with the anterior branch of the great auricular nerve in 3.3%, and with the transverse cervical nerve in 3.3% of specimens. The relationship of the nerve to the lower border of the mandible at a point midway between the angle of the mandible and symphysis menti is variable; it is either totally above it in most of the specimens 80%, or below it in 10% or at it in the remaining 10% of the specimens. The branches that lie above the lower border of the mandible are always deep into the superficial layer of the parotid fascia, while those branches that lie below the lower border of the mandible are intrafascially. The termination of the nerve is deep into the muscles of the ipsilateral lower lip in all specimens.

Restricted Mandibular Movement Attributed to Ossification of Mandibular Depressors and Medial Pterygoid Muscles in Patients With Fibrodysplasia Ossificans Progressiva: A Report of 3 Cases.

Science.gov (United States)

Okuno, Tetsuko; Suzuki, Hitoshi; Inoue, Akio; Kusukawa, Jingo

2017-09-01

Fibrodysplasia ossificans progressiva (FOP) is an extremely rare genetic condition characterized by congenital malformation and progressive heterotopic ossification (HO) caused by a recurrent single nucleotide substitution at position 617 in the ACVR1 gene. As the condition progresses, HO leads to joint ankylosis, breathing difficulties, and mouth-opening restriction, and it can shorten the patient's lifespan. This report describes 3 cases of FOP confirmed by genetic testing in patients with restricted mouth opening. Each patient presented a different onset and degree of jaw movement restriction. The anatomic ossification site of the mandibular joint was examined in each patient using reconstructed computed tomographic (CT) images and 3-dimensional reconstructed CT (3D-CT) images. A 29-year-old woman complained of jaw movement restriction since 13 years of age. 3D-CT image of the mandibular joint showed an osseous bridge, formed by the mandibular depressors that open the mouth, between the hyoid bone and the mentum of the mandible. A 39-year-old man presented with jaw movement restriction that developed at 3 years of age after a mouth injury. 3D-CT image of the jaw showed ankylosis of the jaw from ossification of the mandibular depressors that was worse than in patient 1. CT images showed no HO findings of the masticatory muscles. To the authors' knowledge, these are the first 2 case descriptions of the anatomic site of ankylosis involving HO of the mandibular depressors in the jaw resulting from FOP. In contrast, a 62-year-old bedridden woman with an interincisal distance longer than 10 mm (onset, 39 years of age) had no HO of the mandibular depressors and slight HO of the medial pterygoid muscle on the right and left sides. These findings suggest that restricted mouth opening varies according to the presence or absence of HO of the mandibular depressors. Copyright © 2017. Published by Elsevier Inc.

Post-traumatic changes of the temporo-mandibular joint by bone scintigraphy

Energy Technology Data Exchange (ETDEWEB)

Harris, S.A.; Rood, J.P.; Testa, H.J.

1988-01-01

13 patients who sustained mandibular trauma were investigated with radiographs and scintiscans. The scintiscans showed abnormal uptake of radiopharmaceutical in the temporomandibular joint (TMJ). In patients with a long history of traumatic arthrosis, there was more positive correlation between the scintiscans, and clinical symptoms and histology than between radiographs, and symptoms and histology. In patients with mandibular body fractures and no TMJ symptoms, the scans showed abnormal uptake in the TMJ in 7/8 joints, in the absence of radiographic abnormality. The significance of the abnormal uptake and the value of scintigraphy is discussed.

Post-traumatic changes of the temporo-mandibular joint by bone scintigraphy

International Nuclear Information System (INIS)

Harris, S.A.; Rood, J.P.; Testa, H.J.

1988-01-01

13 patients who sustained mandibular trauma were investigated with radiographs and scintiscans. The scintiscans showed abnormal uptake of radiopharmaceutical in the temporomandibular joint (TMJ). In patients with a long history of traumatic arthrosis, there was more positive correlation between the scintiscans, and clinical symptoms and histology than between radiographs, and symptoms and histology. In patients with mandibular body fractures and no TMJ symptoms, the scans showed abnormal uptake in the TMJ in 7/8 joints, in the absence of radiographic abnormality. The significance of the abnormal uptake and the value of scintigraphy is discussed. (author)

A Prototype for the Acquisition and Analysis of the 3D Mandibular Movement

OpenAIRE

Santos, Isa C.T.; Tavares, João Manuel R. S.; Mendes, Joaquim G.; Paulo, Manuel P. F.

2007-01-01

In Dental Medicine is essential to know the mandibular cinematic to simulate the temporomandibular joints, to position teeth moulds in articulators, and to reproduce the mandibular movements in order to insure a satisfactory occlusion. Currently, both commercial and custom made devices are considered expensive and difficult to use in common clinical situations. Considering these disadvantages, it was developed a new system for the acquisition, visualization and analysis of the 3D mandibula...

The role of simultaneous gap arthroplasty and distraction osteogenesis in the management of temporo-mandibular joint ankylosis with mandibular deformity in children.

Science.gov (United States)

Rao, Krishna; Kumar, Sudhir; Kumar, Vijay; Singh, Arun Kumar; Bhatnagar, Sudhir Kumar

2004-02-01

Temporo-mandibular joint ankylosis is a common cause of acquired deformity in children. Surgical correction of the ankylosis only leaves the patient with an uncorrected mandibular deformity. This study was to evaluate the use of distraction osteogenesis for simultaneous correction of the mandibular deformity. This study was done on six children with temporo-mandibular joint ankylosis and mandibular deformity. Uniaxial double pin distractors with Schanz pins were used in this study. The patients underwent simultaneous gap arthroplasty and mandibular osteotomy (retromolar) with distractor insertion. Distraction was started on the fifth post-operative day. The patients were put on dynamic temporo-mandibular joint exercises on the first post-operative day. All patients had a satisfactory mouth opening on follow-up. Satisfactory cosmetic correction of the mandibular deformity was also achieved in all these patients. Some degree of malocclusion resulted from treatment due to which the patients were placed on orthodontic treatment. Distraction osteogenesis can be used simultaneously with gap arthroplasty in patients with temporo-mandibular ankylosis, for the correction of the mandibular deformity.

Adaptações do sistema estomatognático em indivíduos com desproporções maxilo-mandibulares: revisão da literatura Adaptations on the stomatognathic system of individuals with maxillomandibular disproportion: literature review

Directory of Open Access Journals (Sweden)

Tatiana Albuquerque Coutinho

2009-01-01

Full Text Available Esta pesquisa procurou identificar as adaptações do sistema estomatognático em indivíduos com desproporções maxilomandibulares. A revisão bibliográfica se fez por meio das bases de dados nacionais e internacionais, abordando as adaptações do sistema estomatognático em indivíduos com desproporção maxilo-mandibular submetidos a tratamento ortodôntico-cirúrgico (cirurgia ortognática associado à intervenção fonoaudiológica. Observou-se que sujeitos com prognatismo e retrognatismo apresentam adaptações em todas as funções realizadas pelo sistema motor oral, no período pré-cirurgia ortognática. No prognatismo mandibular, a função mais adaptada é a mastigação, caracterizando-se em movimentos verticalizados com utilização do dorso da língua para amassamento do alimento e pouca utilização dos músculos mastigatórios. No retrognatismo mandibular, estudos mostram que a deglutição apresenta-se bastante adaptada, com presença de deslize mandibular anterior somado ao movimento póstero-anterior de língua e com participação da musculatura perioral. Após a cirurgia ortognática, alguns casos podem apresentar adequação das funções do sistema estomatognático, porém em outros persistem as alterações, sendo necessário o conhecimento do fonoaudiólogo sobre as adaptações pré-existentes para traçar o melhor plano de reabilitação.This research had the aim to identify adaptations on the stomatognathic system of individuals with maxillomandibular disproportions. The literature review was carried out using national and international databases, addressing adaptations on the stomatognathic system of subjects with maxillomandibular disproportions submitted to orthognathic surgery associated to speech-language intervention. It was found that subjects with prognathism and retrognathism present adaptations in all oral-motor functions during the presurgical period. In mandibular prognathism, the most adapted function

Anterior approach for knee arthrography

International Nuclear Information System (INIS)

Zurlo, J.V.; Towers, J.D.; Golla, S.

2001-01-01

Objective. To develop a new method of magnetic resonance arthrography (MRA) of the knee using an anterior approach analogous to the portals used for knee arthroscopy.Design. An anterior approach to the knee joint was devised mimicking anterior portals used for knee arthroscopy. Seven patients scheduled for routine knee MRA were placed in a decubitus position and under fluoroscopic guidance a needle was advanced from a position adjacent to the patellar tendon into the knee joint. After confirmation of the needle tip location, a dilute gadolinium solution was injected.Results and conclusion. All the arthrograms were technically successful. The anterior approach to knee MRA has greater technical ease than the traditional approach with little patient discomfort. (orig.)

Tratamiento ortodóncico-quirúrgico de una adaquia anterior Orthodontic-surgical treatment of anterior open bite

Directory of Open Access Journals (Sweden)

Anselmo López Rodríguez

2004-08-01

Full Text Available En la práctica y desarrollo de la cirugía ortognática en el Hospital Universitario "Comandante Manuel Fajardo" a lo largo de los años, la morbilidad de diferentes anomalías del desarrollo maxilo-mandibulares ha mostrado que la adaquia o mordida abierta anterior es bastante frecuente. Desde tempranas edades se detectan y son tratadas por el especialista en Ortodoncia. El cerrar una adaquia en ocasiones se torna difícil y es cuando el análisis del paciente debe realizarse en el grupo multidisciplianrio integrado por cirujanos maxilofaciales, ortodoncistas y protesistas. Se han detectado diferentes causas que pueden producir una adaquia y en su mayor parte son hábitos nocivos que perduran en el paciente; por ejemplo, la interferencia con el centro de crecimiento condilar, la succión del pulgar, la deglución atípica o lengua protractil, la respiración bucal, entre otras. Este trabajo está encaminado en mostrar los diferentes tratamientos que en la actualidad se emplean para reducir una mordida abierta anterior y presenta el caso de una niña de 14 años de edad portadora de una adaquia de más de 18 mm.In the context of orthognathic surgery practice and development at "Comandante Manuel Fajardo" university hospital, morbidity from several anomalies in the maxillomandibular growth has shown that anterior open bite is pretty common. Such anomalies are detected and treated by the orthodontist at early childhood. To close an anterior open bite is difficult sometimes and requires the analysis of the patient by a multidisciplinary group made up of maxillofacial surgeons, orthodontists and denture specialists. A number of causes may be the origin of anterior open bite, mainly harmful habits that persist in the patient such as interference with the condylar growth center, dummy sucking, atypical deglutition or proctatile tongue, mouth breathing, among others. This paper is aimed at showing different therapies that presently reduce anterior open

Isolation of dendritic-cell-like S100β-positive cells in rat anterior pituitary gland.

Science.gov (United States)

Horiguchi, Kotaro; Fujiwara, Ken; Yoshida, Saishu; Higuchi, Masashi; Tsukada, Takehiro; Kanno, Naoko; Yashiro, Takashi; Tateno, Kozue; Osako, Shunji; Kato, Takako; Kato, Yukio

2014-07-01

S100β-protein-positive cells in the anterior pituitary gland appear to possess multifunctional properties. Because of their pleiotropic features, S100β-positive cells are assumed to be of a heterogeneous or even a non-pituitary origin. The observation of various markers has allowed these cells to be classified into populations such as stem/progenitor cells, epithelial cells, astrocytes and dendritic cells. The isolation and characterization of each heterogeneous population is a prerequisite for clarifying the functional character and origin of the cells. We attempt to isolate two of the subpopulations of S100β-positive cells from the anterior lobe. First, from transgenic rats that express green fluorescent protein (GFP) driven by the S100β protein promoter, we fractionate GFP-positive cells with a cell sorter and culture them so that they can interact with laminin, a component of the extracellular matrix. We observe that one morphological type of GFP-positive cells possesses extended cytoplasmic processes and shows high adhesiveness to laminin (process type), whereas the other is round in shape and exhibits low adherence to laminin (round type). We successfully isolate cells of the round type from the cultured GFP-positive cells by taking advantage of their low affinity to laminin and then measure mRNA levels of the two cell types by real-time polymerase chain reaction. The resultant data show that the process type expresses vimentin (mesenchymal cell marker) and glial fibrillary acidic protein (astrocyte marker). The round type expresses dendritic cell markers, CD11b and interleukin-6. Thus, we found a method for isolating dendritic-cell-like S100β-positive cells by means of their property of adhering to laminin.

Thin-plate spline analysis of mandibular growth.

Science.gov (United States)

Franchi, L; Baccetti, T; McNamara, J A

2001-04-01

The analysis of mandibular growth changes around the pubertal spurt in humans has several important implications for the diagnosis and orthopedic correction of skeletal disharmonies. The purpose of this study was to evaluate mandibular shape and size growth changes around the pubertal spurt in a longitudinal sample of subjects with normal occlusion by means of an appropriate morphometric technique (thin-plate spline analysis). Ten mandibular landmarks were identified on lateral cephalograms of 29 subjects at 6 different developmental phases. The 6 phases corresponded to 6 different maturational stages in cervical vertebrae during accelerative and decelerative phases of the pubertal growth curve of the mandible. Differences in shape between average mandibular configurations at the 6 developmental stages were visualized by means of thin-plate spline analysis and subjected to permutation test. Centroid size was used as the measure of the geometric size of each mandibular specimen. Differences in size at the 6 developmental phases were tested statistically. The results of graphical analysis indicated a statistically significant change in mandibular shape only for the growth interval from stage 3 to stage 4 in cervical vertebral maturation. Significant increases in centroid size were found at all developmental phases, with evidence of a prepubertal minimum and of a pubertal maximum. The existence of a pubertal peak in human mandibular growth, therefore, is confirmed by thin-plate spline analysis. Significant morphological changes in the mandible during the growth interval from stage 3 to stage 4 in cervical vertebral maturation may be described as an upward-forward direction of condylar growth determining an overall "shrinkage" of the mandibular configuration along the measurement of total mandibular length. This biological mechanism is particularly efficient in compensating for major increments in mandibular size at the adolescent spurt.

Fused primary first mandibular macromolar with a unique relation to its permanent successors: A rare tooth anomaly.

Science.gov (United States)

Dhindsa, Abhishek; Garg, Shalini; Damle, S G; Opal, Shireen; Singh, Tavleen

2013-04-01

Dental anomalies of number and forms may occur in the primary and permanent dentition. Various terms have been used to describe dental twinning anomalies: Germination, fusion, concrescence, double teeth, conjoined teeth, twinned teeth, geminifusion, and vicinifusion. Fused tooth is a developmental anomaly that is seen more frequently in the primary than the permanent dentition. Double tooth involving deciduous anterior teeth is found mostly in the mandible. Very few cases of nonsyndromic double primary molar have been reported in the literature. The succeeding permanent tooth is often found missing congenitally in the same region. This article reports a very rare unilateral occurrence of an anomalous, primary mandibular first macromolar formed by fusion with a dysmorphic premolar like supernumerary tooth in deciduous dentition period. Instead of agenesis of succedaneous tooth, the double tooth has been succeeded by normally developing mandibular first premolar in the same region.

Mandibular canal branches supplying the mandibular third molar observed on cone beam computed tomographic images: Reports of four cases

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae Seo; Yoon, Suk Ja; Kang, Byung Cheol [Department of Oral and Maxillofacial Radiology, School of Dentistry, Dental Science Research Institute, Chonnam National University, Gwangju (Korea, Republic of)

2009-12-15

Bifid mandibular canal can be an anatomic variation. This condition can lead to complication when performing mandibular anesthesia or during extraction of lower third molar, placement of implants and surgery in the mandible. Four patients underwent preoperative imaging for extraction of third molars using CBCT (CB Mercuray, Hitachi, Japan). The axial images were processed with CBworks program 2.1 (CyberMed Inc., Seoul, Korea). The branches for supplying the lower third molar were identified mainly on cross-sectional and panoramic images of CBCT. Since the location and configuration of mandibular canal variations are important in any mandibular surgical procedures, we report 4 cases of bifid mandibular canal with panoramic and the CBCT images.

21 CFR 872.3960 - Mandibular condyle prosthesis.

Science.gov (United States)

2010-04-01

... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3960 Mandibular condyle prosthesis. (a) Identification. A mandibular condyle prosthesis is a device that is intended to be implanted in the human jaw to... requirement for premarket approval for any mandibular condyle prosthesis intended to be implanted in the human...

Mandibular ameloblastomas

International Nuclear Information System (INIS)

Masip, M.J.; Arana, E.; Beltran, J.; Garcia, J.L.; Cifrian, C.; Aparisi, F.

1995-01-01

We present a retrospective review of 39 cases of mandibular ameloblastoma that were assessed in terms of patient age and sex, duration and clinical signs at the time of diagnosis. The associated plain radiology, CT and MR signs are also reviewed. It usually presented as a slowly growing, painless mass. According to radiological findings, most of the ameloblastomas studied were extensive, involving the mandibular branch, angle and molar area; the lesions were expanding, unilocular or multilocular, with erosion of the dental apex. CT disclosed cystic areas of low attenuation. The images of the three patients studied by MR presented low signal intensity in T1-weighed sequences and hyperintense signal in t2-weighted sequences. 9 refs

The Position of Hyoici Bone in Skeletal Class I, II and III Patients

Directory of Open Access Journals (Sweden)

Ravanmehr H

2000-06-01

Full Text Available In this investigation, the position of hyoid bone was compared in three skeletal groups of class I, II and III. The study was based on evaluating 77 lateral cephalometric radiographs, 40 girls and 37 boys, which were divided into 3 groups. Group 1, 2, and 3 consist of 26, 25, and 26 radiographs. 19 cephalometric landmarks and 10 planes were used in order to tracing the radiographs. In all patients, 9 skeletal and 4 cervical vertebrae parameters were measured to determine the hyoid bone. These parameters were compared between three skeletal groups regardless of sex and then, in another statistical analysis, parameters were compared based on patients sex. Statistical analysis showed that in class III patients, the hyoid bone was positioned more anteriorly than two other groups. Also in this group, the hyoid bone had less inclination and it was more horizontal in relation to mandibular plane. In skeletal class II patients this bone was positioned more superiorly than two other groups. Due to these findings it can be concluded that perimandibular muscles and bones could affect the growth of mandible. In addition, comparison of the parameters between two sexes revealed that the hyoid bone was positioned more anteriorly and inferiorly in boys. Also it was shown that in the girls, the position of hyoid bone was closer to the position of this bone in skeletal class I patients.

A comparative study of the skeletal morphology of the temporo-mandibular joint of children and adults.

Science.gov (United States)

Meng, F; Liu, Y; Hu, K; Zhao, Y; Kong, L; Zhou, S

2008-01-01

The skeletal morphology of the temporo-mandibular joint (TMJ) is constantly remodeled. A comparative study was undertaken to determine and characterize the differences in the skeletal morphology of TMJ of children and adults. The study was conducted on 30 children cadavers and 30 adult volunteers. Parameters that could reflect TMJ skeletal morphology were measured with a new technology combining helical computed tomography (CT) scan with multi-planar reformation (MPR) imaging. Significant differences between children cadavers and adults were found in the following parameters (P<0.05): Condylar axis inclination, smallest area of condylar neck/largest area of condylar process, inclination of anterior slope in inner, middle, and outer one-third of condyle, anteroposterior/mediolateral dimension of condyle, length of anterior slope/posterior slope in inner and middle one-third of condyle, anteroposterior dimension of condyle/glenoid fossa, mediolateral dimension of condyle/glenoid fossa, inclination of anterior slope of glenoid fossa, depth of glenoid fossa, and anteroposterior/mediolateral dimension of glenoid fossa. There are significant differences of TMJ skeletal morphology between children and adults.

Position of the Mental Foramen in Panoramic Radiography and Its Relationship to Age in a Selected Iranian Population

Directory of Open Access Journals (Sweden)

Dehghani

2016-02-01

Full Text Available Background The position of the mental foramen is critical for surgery and local anesthesia. Objectives This study was conducted to assess the position of the mental foramen and its relationship to age in a selected Iranian population. Materials and Methods This was a cross-sectional descriptive study. Three hundred panoramic radiographs were assessed. Three variables were assessed for each radiograph: anterior-posterior position, superior-inferior position, and radiographic appearance. The position and appearance of the mental foramen were recorded according to gender and age. The results were analyzed using Chi-square and Fisher’s exact tests. Results Considering the anterior-posterior position, the mental foramina were located in the following positions: between premolars (41.5%, at the apex of the second premolars (31.7%, in the posterior area of the second premolars (19.2%, in the anterior area of the first premolars (4.3%, and at the apex of the first premolars (3.3%.The superior-inferior position of the mental foramina were below, above, and at the level of the apices of the premolars in 78.8%, 2.5%, and 18.7% of cases, respectively. The appearance of the mental foramen was continuous in relation to the mandibular canal in 55.9% of cases, while it was separated, diffuse, and unidentified in 29.5%, 9.7%, and 5% of cases, respectively. Age was found to affect the position and appearance of mental foramen. Conclusions The mental foramina were most commonly located between the first and second premolars and below the apex. A continuous appearance was the most common appearance for the mental foramen, which was similar in males and females.

A new method of CT scanning for the diagnosis of mandibular fractures; A preliminary report: diagnosis of condyle fractures

Energy Technology Data Exchange (ETDEWEB)

Tsukagoshi, Taku; Satoh, Kaneshige; Onizuka, Takuya (Showa Univ., Tokyo (Japan). School of Medicine)

1990-08-01

The condylar neck of the mandible is one of the most common fracture sites in the facial skeleton. Such a fracture is routinely diagnosed by A-P, lateral oblique, and Towne projection roentgenography or orthopantomography. Despite the combination of these films, fracture of the neck of the mandible is still difficult to diagnose definitely. Therefore, a new CT scanning method was developed for diagnosing fractures of the neck of the condylar mandible. The CT axis is projected along the length of the mandible, extending from the condyle to the symphysis. This projection visualizes both the condyle and the mandibular symphysis in the same plane. The patient is placed in a supine position with the head fully extended. The base line, a line extending from the midpoint of the glenoid fossa to the menton, is determined with a lateral facial cephalogram. CT scanning with a 5 mm window is performed in parallel with and 2 cm anterior to and 2 cm posterior to the base line. When CT scanning was performed in a healthy volunteer, the condition of the condyle and the condylar neck of the mandible was clearly shown, and the view extended from the condyle to the symphysis. For automobile accident patients in whom fracture of the neck of the mandible was associated with fracture of the symphysis, two fractures were found in the same plane. A newly developed CT scanning technique is useful in the diagnosis of fractures of the condylar neck of the mandible and in the identification of fractures at other mandibular sites. It also allows scanning of patients in a supine position, which may aid in managing patients with multiple traumas. (N.K.).

TMJ response to mandibular advancement surgery: an overview of risk factors

Science.gov (United States)

VALLADARES-NETO, José; CEVIDANES, Lucia Helena; ROCHA, Wesley Cabral; ALMEIDA, Guilherme de Araújo; de PAIVA, João Batista; RINO-NETO, José

2014-01-01

Objective In order to understand the conflicting information on temporomandibular joint (TMJ) pathophysiologic responses after mandibular advancement surgery, an overview of the literature was proposed with a focus on certain risk factors. Methods A literature search was carried out in the Cochrane, PubMed, Scopus and Web of Science databases in the period from January 1980 through March 2013. Various combinations of keywords related to TMJ changes [disc displacement, arthralgia, condylar resorption (CR)] and aspects of surgical intervention (fixation technique, amount of advancement) were used. A hand search of these papers was also carried out to identify additional articles. Results A total of 148 articles were considered for this overview and, although methodological troubles were common, this review identified relevant findings which the practitioner can take into consideration during treatment planning: 1- Surgery was unable to influence TMJ with preexisting displaced disc and crepitus; 2- Clicking and arthralgia were not predictable after surgery, although there was greater likelihood of improvement rather than deterioration; 3- The amount of mandibular advancement and counterclockwise rotation, and the rigidity of the fixation technique seemed to influence TMJ position and health; 4- The risk of CR increased, especially in identified high-risk cases. Conclusions Young adult females with mandibular retrognathism and increased mandibular plane angle are susceptible to painful TMJ, and are subject to less improvement after surgery and prone to CR. Furthermore, thorough evidenced-based studies are required to understand the response of the TMJ after mandibular advancement surgery. PMID:24626243

Growth hormone positive effects on craniofacial complex in Turner syndrome.

Science.gov (United States)

Juloski, Jovana; Dumančić, Jelena; Šćepan, Ivana; Lauc, Tomislav; Milašin, Jelena; Kaić, Zvonimir; Dumić, Miroslav; Babić, Marko

2016-11-01

Turner syndrome occurs in phenotypic females with complete or partial absence of X chromosome. The leading symptom is short stature, while numerous but mild stigmata manifest in the craniofacial region. These patients are commonly treated with growth hormone to improve their final height. The aim of this study was to assess the influence of long-term growth hormone therapy on craniofacial morphology in Turner syndrome patients. In this cross-sectional study cephalometric analysis was performed on 13 lateral cephalograms of patients with 45,X karyotype and the average age of 17.3 years, who have received growth hormone for at least two years. The control group consisted of 13 Turner syndrome patients naive to growth hormone treatment, matched to study group by age and karyotype. Sixteen linear and angular measurements were obtained from standard lateral cephalograms. Standard deviation scores were calculated in order to evaluate influence of growth hormone therapy on craniofacial components. In Turner syndrome patients treated with growth hormone most of linear measurements were significantly larger compared to untreated patients. Growth hormone therapy mainly influenced posterior face height, mandibular ramus height, total mandibular length, anterior face height and maxillary length. While the increase in linear measurements was evident, angular measurements and facial height ratio did not show statistically significant difference. Acromegalic features were not found. Long-term growth hormone therapy has positive influence on craniofacial development in Turner syndrome patients, with the greatest impact on posterior facial height and mandibular ramus. However, it could not compensate X chromosome deficiency and normalize craniofacial features. Copyright © 2016 Elsevier Ltd. All rights reserved.

MANDIBULAR MORPHOMETRY APPLIED TO ANESTHETIC BLOCKAGE IN THE MANED WOLF (CHRYSOCYON BRACHYURUS).

Science.gov (United States)

de Souza Junior, Paulo; de Moraes, Flavio Machado; de Carvalho, Natan da Cruz; Canelo, Evandro Alves; Thiesen, Roberto; Santos, André Luiz Quagliatto

2016-03-01

Chrysocyon brachyurus (maned wolf) is the biggest South American canid and has a high frequency of dental injuries, both in the wild and in captivity. Thus, veterinary procedures are necessary to preserve the feeding capacity of hundreds of captive specimens worldwide. The aim of this study was to investigate the mandibular morphometry of the maned wolf with emphasis on the establishment of anatomic references for anesthetic block of the inferior alveolar and mental nerves. Therefore, 16 measurements in 22 mandibles of C. brachyurus adults were taken. For extraoral block of the inferior alveolar nerve at the level of the mandibular foramen, the needle should be advanced close to the medial face of the mandibular ramus for 11.4 mm perpendicular to the palpable concavity. In another extraoral approach, the needle may be introduced for 30.4 mm from the angular process at a 20-25° angle to the ventral margin. For blocking only the mental nerve, the needle should be inserted for 10 mm from ventral border, close to the labial surface of the mandibular body, at the level of the lower first premolar. The mandibular foramen showed similar position, size, and symmetry in the maned wolf specimens examined. Comparison of the data observed here with those available for other carnivores indicates the need to determine these anatomic references specifically for each species.

Anquilosis mandibular: una frecuente secuela por Noma Mandibular ankylosis: a Noma frequent sequel

Directory of Open Access Journals (Sweden)

R. Fernández García-Guilarte

2009-12-01

Full Text Available Conocemos poco sobre el Noma o Enfermedad Cancrum Oris. Esta entidad afecta a niños con malnutrición crónica, poca higiene oral, poco desarrollo sanitario y enfermedades concurrentes debilitantes. Existe un consenso general sobre que el Noma empieza como una gingivitis; en su fase aguda, puede haber respuesta al tratamiento antibiótico, no obstante, las secuelas tras su curación incluyen daños estéticos y funcionales variables, que pueden requerir cirugía reconstructiva. Presentamos 3 casos de anquilosis mandibular que en el examen preoperatorio presentaron dimorfismo mandibular, fusión de hueso maxilar y mandibular y anquilosis de la articulación témporomandibular. La ortopantografía y la Tomografía Axial Computerizada (TAC fueron muy útiles en la planificación de la cirugía. El tratamiento quirúrgico consistió en todos los casos en la resección del hueso anquilótico y la reconstrucción con injerto condrocostal en uno de los casos. En el postoperatorio se siguió fisioterapia intensiva. Clínicamente todos los pacientes mostraron una gran mejoría en la masticación, la alimentación y el habla, obviamente debido a una buena oclusión. El problema más común fue la baja colaboración en la rehabilitación mandibular por parte de los pacientes.Little is known about Noma or Cancrum Oris Disease. This entity affects to children with chronic malnutrition, poor oral hygiene, poor environmental sanitation and debilitating concurrent illness. There is general consensus that noma starts as gingivitis. The acute stage responds readily to antibiotic treatment. The sequelae after healing include variable functional and aesthetic impairments, which require reconstructive surgery. We report 3 cases of mandibular ankylosis. Preoperative examination revealed mandibular dismorphism, fusion of maxilla and mandible and ankylosis of the temporomandibular joint. Orthopantography and Computed Thomography scan (TCS were very useful in planning

Effect of implant position, angulation, and attachment height on peri-implant bone stress associated with mandibular two-implant overdentures: a finite element analysis.

Science.gov (United States)

Hong, Hae Ryong; Pae, Ahran; Kim, Yooseok; Paek, Janghyun; Kim, Hyeong-Seob; Kwon, Kung-Rock

2012-01-01

The aim of this study was to analyze and compare the level and distribution of peri-implant bone stresses associated with mandibular two-implant overdentures with different implant positions. Mathematical models of mandibles and overdentures were designed using finite element analysis software. Two intraosseous implants and ball attachment systems were placed in the interforaminal region. The overdenture, which was supported by the two implants, was designed to withstand bilateral and unilateral vertical masticatory loads (total 100 N). In all, eight types of models, which differed according to assigned implant positions, height of attachments, and angulation, were tested: MI (model with implants positioned in the lateral incisor sites), MC (implants in canine sites), MP (implants in premolar sites), MI-Hi (greater height of attachments), MC-M (canine implants placed with mesial inclination), MC-D (canine implants placed with distal inclination), MC-B (canine implants placed with buccal inclination), and MC-L (canine implants placed with lingual inclination). Peri-implant bone stress levels associated with overdentures retained by lateral incisor implants resulted in the lowest stress levels and the highest efficiency in distributing peri-implant stress. MI-Hi showed increased stress levels and decreased efficiency in stress distribution. As the implants were inclined, stress levels increased and the efficiency of stress distribution decreased. Among the inclined models, MC-B showed the lowest stress level and best efficiency in stress distribution. The lowest stress and the best stability of implants in mandibular two-implant overdentures were obtained when implants were inserted in lateral incisor areas with shorter attachments and were placed parallel to the long axes of the teeth.

Treatment of mandibular symphyseal fracture combined with dislocated intracapsular condylar fractures.

Science.gov (United States)

Xu, Xiaofeng; Shi, Jun; Xu, Bing; Dai, Jiewen; Zhang, Shilei

2015-03-01

To evaluate the treatment methods of mandibular symphyseal fracture combined with dislocated intracapsular condylar fractures (MSF&DICF) and to compare the effect of different treatment methods of condylar fractures. Twenty-eight patients with MSF&DICF were included in this study. Twenty-two sites were treated by open reduction, and all the medial condylar fragments were fixed with titanium screws; whereas the other 22 sites underwent close treatment. The surgical effect between these 2 groups was compared based on clinical examination and radiographic examination results. Seventeen of 22 condyle fractures were repositioned in the surgery group, whereas 4 of 22 condyle fractures were repositioned in the close treatment group. Statistical difference was observed between these 2 groups (P condyle fractures should be treated by surgical reduction with the maintenance of the attachment of lateral pterygoid muscle, which is beneficial to repositioning the dislocated condyle to its original physiological position, to closure of the mandibular lingual gap, to restore the mandibular width.

Pharyngeal airway changes following mandibular setback surgery

Directory of Open Access Journals (Sweden)

Babu Ramesh

2005-01-01

Full Text Available Treatment of dentofacial deformities with jaw osteotomies has an effect on airway anatomy and therefore mandibular setback surgery has the potential to diminish airway size. The purpose of this study was to evaluate the effect of mandibular setback surgery on airway size. 8 consecutive patients were examined prospectively. All patients underwent mandibular setback surgery. Cephalometric analysis was performed preoperatively and 3 months post operatively with particular attention to pharyngeal airway changes. Pharyngeal airway size decreased considerably in all, patients thus predisposing to development of obstructive sleep apnea. Therefore, large anteroposterior discrepancies should be corrected by combined maxillary and mandibular osteotomies.

An unusual case of ameloblastoma observed in the left anterior mandible.

Science.gov (United States)

Canger, Emin Murat; Çelenk, Peruze; Bulut, Emel; Günhan, Ömer

2014-11-01

To report a small intaalveolar ameloblastoma which resembled cystic lesion, and to emphasize the value of Computed tomography (CT) in radiographic examination. Ameloblastoma is a slow-growing, locally invasive odontogenic neoplasm that accounts for approximately 10% of all tumors detected in the jaws. Radiographically, those tumors are usually well-defined. Computerized tomography is highly recommended to confirm the diagnosis. A 48-year-old female attended with a chief complaint of painless swelling in the left anterior of mandible, 1 month duration. In intraoral examination, non-fluctuant, immobile, approximately 1 × 1 cm in dimension, painless, swelling which had a bone-like hardness and located in the mandibular canine region was detected. Panoramic radiography revealed a well circumscribed unilocular radiolucent lesion located in the inter-radicular area of left mandibular lateral and canine teeth. In CT examination it was realized that the lesion was multilocular. Histopathological examination of the biopsy specimen was reported as ameloblastoma. It is extremely difficult to find such an ameloblastoma in small dimension in alvolar bone.

A study of angle of mandibular canal and mental foramen on the panoramic radiograph

International Nuclear Information System (INIS)

Choi, Hang Moon

2009-01-01

To assessment the angle between mandibular canal and occlusal plane at each posterior tooth region and location of mental foramen on the panoramic radiographs. This study analysed 46 half-mandibles of panoramic radiographs. Inferior border of mandibular canal was traced. Occlusal plane was drawn from lingual cusp tip of the first premolar to distolingual cusp tip of the second molar. Perpendicular line from occlusal plane was drawn at each tooth region and then tangential lines were drawn from the crossing points at canal. The angle between occlusal plane and tangential line was measured. The location of mental foramen was also studied. According to the location of mental foramen, radiographs were divided into M (mesial) group and D (distal) group on the basis of the second premolar. and then inter-group analysis about mandibular canal angle was done. The angles of mandibular canals were -17.7 .deg. C, -9.5 .deg. C, 8.2 .deg. C, 22.3 .deg. C, and 39.2 .deg. C at first premolar, second premolar, first molar, second molar, and third molar, respectively. The commonest position of the mental foramen was distal to the second premolar. Inter-group comparison showed statistically significant difference at the second premolar and the first molar (p<0.001). The acknowledgement of mandibular canal angulation and location of mental foramen can help understanding the course of mandibular canal.

Interpretation of mandibular condyle fractures using 2D- and 3D-computed tomography

Directory of Open Access Journals (Sweden)

Costa e Silva Adriana Paula de Andrade da

2003-01-01

Full Text Available Computed tomography (CT has been increasingly used in the examination of patients with craniofacial trauma. This technique is useful in the examination of the temporomandibular joint and allows the diagnosis of fractures of the mandibular condyle. Aiming to verify whether the three-dimensional reconstructed images from CT (3D-CT produce more effective visual information than the two-dimensional (2D-CT ones, we evaluated 2D-CT and 3D-CT examinations of 18 patients with mandibular condyle fractures. We observed that 2D-CT and 3D-CT reconstructed images produced similar information for the diagnosis of fractures of the mandibular condyle, although the 3D-CT allowed a better visualization of the position and displacement of bone fragments, as well as the comminution of fractures. These results, together with the possibility of refining and manipulating perspectives in 3D images, reinforce the importance of its use in the surgical planning and evaluation of treatment. We concluded that 3D-CT presented supplementary information for a more effective diagnosis of mandibular condyle fractures.

Sensitivity and specificity of a new MRI method evaluating temporo-mandibular joint disc-condyle relationships: an in vivo study.

Science.gov (United States)

Benbelaïd, R; Fleiter, B

2006-03-01

The aim of this study was to evaluate sensitivity and specificity of a new method to locate temporo-mandibular joint (TMJ) disc using magnetic resonance imaging (MRI) and analyze disc-condyle relationships, in asymptomatic subjects and patients with disc displacement. Twenty-nine sagittal MRI of 16 subjects, 8 asymptomatic volunteers and 8 subjects with anterior disc displacement, were carried out during controlled opening from intercuspal position up to a 25 mm opening. Selected sections were analyzed with a graphic computerized system of coordinates. The total surface area (TS) of disc section was separated into anterior surface area (AS) and posterior surface area. Areas were determined by computer. Two trained examiners drew images at random. The reliability of AS/TS ratio index was evaluated in a previous study. AS/TS ratio sensitivity (Se) and specificity (Sp) were calculated closed mouth, 5 mm open and 25 mm open mouth. Best sensitivity (Se=0.63) and specificity (Sp=0.81) were obtained when MRI was realized with closed mouth and 25 mm open mouth. Lower sensitivity was observed when MRI was performed either with closed mouth (Se=0.54) or 25 mm open mouth (Se=0.18). Lower specificity was observed with 5 mm open mouth (Sp=0.68). In conclusion, it was confirmed as well that MRI of anterior disc displacement should be performed with closed mouth and opened mouth. Thus, further studies are required to assess disc displacement and mechanical alterations and to evaluate the risk of direct damage on TMJ tissues.

Retroauricular transmeatal approach to manage mandibular condylar head fractures.

Science.gov (United States)

Benech, Arnaldo; Arcuri, Francesco; Baragiotta, Nicola; Nicolotti, Matteo; Brucoli, Matteo

2011-03-01

There is a multitude of reported surgical approaches and technical variants with some unresolved technical problems to gain direct access to mandibular condylar head fractures; they can be divided into 2 groups: intraoral and extraoral. In 2005, Neff et al (Mund Kiefer Gesichtschir 2005;9:80), supported by a previous experimental work, reported a successful clinical study of condylar head fractures treated by a retroauricular approach; this article is in German, and the later English-language literature does not mention about this approach to open reduction and internal fixation of mandibular condylar fractures. The retroauricular transmeatal access, selected and performed by the senior author to treat 14 patients affected by highly located condylar head fracture, is illustrated in details. We collected data of 14 consecutive adult patients who, after the discussion about all options, had consented to have 16 mandibular condylar head fractures treated with open reduction and internal fixation by miniplates and screws via a retroauricular transmeatal approach. We exposed the temporomandibular joint area easily and better by dissecting via a retroauricular route with identification, ligation, and transection of the retromandibular vein; because of the posterior access, the frontal branch of the facial nerve and the auriculotemporal nerve are located and protected within the substance of the anteriorly retracted flap, superficial to the retromandibular vein. The follow-up clinical examination showed temporary weakness of the frontal branch of the facial nerve in 1 case with a recovery to normal function of 1.6 months; no patients had permanent weakness of the facial nerve or injury of the auriculotemporal nerve. There was absence of any salivary fistula, sialocele, and Frey syndrome; hearing was preserved in all cases, without any auditory stenosis or aesthetic deformity, and there was absence of any infections, hematoma, or scarring. Retroauricular approach provides

Thin-plate spline analysis of mandibular morphological changes induced by early class III treatment: a long-term evaluation.

Science.gov (United States)

Franchi, Lorenzo; Pavoni, Chiara; Cerroni, Silvia; Cozza, Paola

2014-08-01

To evaluate the long-term mandibular morphological changes induced by early treatment of class III malocclusion with rapid maxillary expansion (RME) and facial mask (FM). Twenty-five subjects [10 boys, 15 girls; mean age at T1 (start of treatment) 9.3±1.6 years] with class III disharmony were treated with RME and FM therapy followed by fixed appliances. The patients were re-evaluated at the end of growth (T2), about 8.5 years after the end of the treatment (mean age, 18.6±2.0 years). Sixteen subjects with untreated class III malocclusion comprised the control group. Mandibular shape changes were analysed on the lateral cephalograms of the subjects of both groups by means of thin-plate spline (TPS) analysis. Procrustes average mandibular configurations were subjected to TPS analysis by means of both cross-sectional between-group comparisons at T1 and at T2 and longitudinal within-group comparisons. Statistical analysis of shape differences was performed using a generalized Goodall F test. In the long term, the treated group exhibited a significant upward and forward direction of condylar growth. On the contrary, untreated class III subjects showed an upward and backward direction of condylar growth associated with a downward and forward deformation of the mandibular symphysis. Limitations are related to the small sample size of both treated and control groups and to the retrospective nature of the study. Early treatment of class III malocclusion with RME and FM is able to produce significant and favourable long-term mandibular shape changes characterized by an anterior morphogenetic rotation. © The Author 2013. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

The effect of varying implant position in immediately loaded implant-supported mandibular overdentures.

Science.gov (United States)

Shaarawy, Mohammed A; Aboelross, Ehab M

2013-06-01

This study was carried out to evaluate the effect of varying implant position in immediately loaded implant-supported mandibular overdentures on peri-implant bone density, muscle activity, and patient satisfaction. Fourteen completely edentulous patients were selected for the study. After complete denture construction, patients were divided into 2 equal groups. Four dental implants were installed bilaterally in the interforaminal region in the first group, while in the second group, 4 dental implants were inserted bilaterally: 2 in the interforaminal region and 2 in the first molar area. Immediately after suturing, telescopic abutments were screwed to the implants, and the retaining caps were picked up into the fitting surface of the lower denture, which was delivered to the patient. Patients were recalled for radiographic bone density evaluation just after denture delivery and then at 3, 6, and 12 months thereafter. Muscle activities of masseter and temporalis muscles as well as patient satisfaction were also evaluated. The results of the study showed a high success rate approximating 98.2% of the immediately loaded implants. The electromyographic (EMG) records of both muscles in group 1 were significantly higher during chewing hard food after 3 months compared with group 2 (P overdentures through posterior placement beyond the interforaminal area results in a favorable response in terms of increased peri-implant bone density as well as decreased EMG activity of masseter and temporalis muscles.

Effect of clear aligner therapy on the buccolingual inclination of mandibular canines and the intercanine distance.

Science.gov (United States)

Grünheid, Thorsten; Gaalaas, Sara; Hamdan, Hani; Larson, Brent E

2016-01-01

To compare the changes in buccolinugal inclination of mandibular canines and intercanine distance in patients treated with clear aligners to those treated with preadjusted edgewise appliances. The buccolingual inclination of mandibular canines and the intercanine distance were measured on pre- and posttreatment cone-beam computed tomograms of 30 patients who had been treated with clear aligners and 30 patients who had been treated with fixed preadjusted edgewise appliances. Differences between the aligner and fixed appliance groups and between pre- and posttreatment measurements were tested for statistical significance. In both groups, most of the mandibular canines had positive buccolingual inclinations (ie, their crowns were positioned lateral to their roots) both before and after treatment. While there was no difference between the groups pretreatment, the posttreatment buccolingual inclination was significantly greater in the aligner group. In the fixed appliance group, the canines became more upright with treatment, while the buccolingual inclination did not change significantly in the clear aligner group. The intercanine distance did not differ between the groups either before or after treatment. However, it increased significantly over the course of treatment in the aligner group, whereas it did not change significantly in the fixed appliance group. Orthodontic treatment with clear aligners tends to increase the mandibular intercanine distance with little change in inclination in contrast to treatment with fixed appliances, which leaves the intercanine distance unchanged but leads to more upright mandibular canines.

Mandibular reconstruction in adults: a review.

NARCIS (Netherlands)

Goh, B.T.; Lee, S.; Tideman, H.; Stoelinga, P.J.W.

2008-01-01

Mandibular defects may result from trauma, inflammatory disease and benign or malignant tumours. Mastication, speech and facial aesthetics are often severely compromised without reconstruction. The goal of mandibular reconstruction is to restore facial form and function, implying repair of

Immediate effect of occlusal contact pattern in lateral jaw position on the EMG activity in jaw-elevator muscles in humans.

Science.gov (United States)

Baba, K; Yugami, K; Akishige, S; Ai, M

2000-01-01

The aim of this study was to investigate the effect of experimental alterations of nonworking-side occlusal contacts on jaw-elevator muscle activity. Individual devices were fabricated to simulate various lateral occlusal relationships. Twelve human subjects were asked to carry out submaximal lateral clenching, and electromyographic (EMG) activity of the masseter and anterior and posterior temporalis muscles was measured. Clenching in a lateral mandibular position under natural conditions induced an activity pattern with a clear dominance of the anterior and posterior temporalis muscles on the working side. Working-side dominance in the anterior temporalis was reduced moderately when an experimental nonworking-side occlusal contact was added. Dominance decreased dramatically when an experimental nonworking-side interference was added. The working-side activity in the posterior temporalis was also reduced dramatically by an experimental nonworking-side interference, but not by a nonworking-side occlusal contact. None of the experimental contact patterns had a significant effect on the masseter activity. These results suggest that the nonworking-side occlusal contacts have a significant effect on clenching-induced temporalis muscle activity.

Effect of dental wear, stabilization appliance and anterior tooth reconstruction on mandibular movements during speech.

Science.gov (United States)

Serrano, Priscila de Oliveira; Faot, Fernanda; Del Bel Cury, Altair Antoninha; Rodrigues Garcia, Renata Cunha Matheus

2008-01-01

This study described changes in mandibular movements during pronunciation of /m/ and /s/ sounds in Portuguese, in patients presenting dental wear before and after appliance insertion and tooth reconstruction. Subjects were divided into a control group of dentate patients and an experimental group of patients with incisal tooth wear due to bruxism. A magnetic jaw tracking device measured the jaw opening, and translations to left and right sides of the mandible during pronunciation of phonemes. Evaluations were carried out 1 week and immediately before appliance insertion; 24 h, 7, 30 and 60 days after appliance insertion; and 1 week and 1 month after tooth reconstruction. Data were submitted to two-way ANOVA, Mann-Whitney and Friedman tests (pspeech of /m/ and /s/ sounds were not changed after appliance insertion and reconstruction of teeth.

Reliability of mandibular canines as indicators for sexual dichotomy.

Science.gov (United States)

Hosmani, Jagadish V; Nayak, Ramakant S; Kotrashetti, Vijayalakshmi S; S, Pradeep; Babji, Deepa

2013-02-01

Amongst the various calcified structures in the human body, teeth have gained lot of popularity in estimating the sex of an individual as they are highly resistant to destruction and decomposition. Using permanent mandibular canines many researchers have predicted a high level of accuracy in identifying the sex correctly. The purpose of our study was to gauge the effectiveness of mandibular canines in discerning sex. Fifty dental casts each of males and females were utilized for the study. Mesio-distal dimension and inter-canine distance of mandibular right and left canine was recorded using digital vernier caliper and mandibular canine index was calculated. The mean value of mesio-distal dimensions of right and left mandibular canine was slightly greater in males compared to females. The mandibular canine index was equal in both sexes. Inter-canine distance was marginally higher in males compared to females. Despite of higher values in males none of the parameters were statistically significant. The results herein bolster contemporary studies that mesio-distal dimensions of mandibular canines and mandibular canine index do not reflect sexual dimorphism and that its application should be discontinued in sex prediction among Indian populations. How to cite this article: Hosmani J V, Nayak R S, Kotrashetti V S, Pradeep S, Babji D. Reliability of Mandibular Canines as Indicators for Sexual Dichotomy. J Int Oral Health 2013; 5(1):1-7.

Accuracy of a computer-assisted planning and placement system for anatomical femoral tunnel positioning in anterior cruciate ligament reconstruction

NARCIS (Netherlands)

Luites, J.W.H.; Wymenga, A.B.; Blankevoort, L.; Eygendaal, D.; Verdonschot, Nicolaas Jacobus Joseph

2014-01-01

Background Femoral tunnel positioning is a difficult, but important factor in successful anterior cruciate ligament (ACL) reconstruction. Computer navigation can improve the anatomical planning procedure besides the tunnel placement procedure. Methods The accuracy of the computer-assisted femoral

Cone-beam computed tomography study of root and canal morphology of mandibular premolars in a western Chinese population

International Nuclear Information System (INIS)

Yu, Xuan; Guo, Bin; Li, Ke-Zeng; Zhang, Ru; Tian, Yuan-Yuan; Wang, Hu; DDS, Tao Hu

2012-01-01

Traditional radiography is limited in its ability to give reliable information on the number and morphology of root canals. The application of cone-beam computed tomography (CBCT) provides a non-invasive three-dimensional confirmatory diagnosis as a complement to conventional radiography. The aim of this study was to evaluate the root and canal morphology of mandibular premolars in a western Chinese population using CBCT scanning. The sample included 149 CBCT images comprising 178 mandibular first premolars and 178 second premolars. The tooth position, number of roots and canals, and canal configuration according to Vertucci’s classification were recorded. The results showed that 98% of mandibular first premolars had one root and 2% had two roots; 87.1% had one canal, 11.2% had two canals and 0.6% had three canals. The prevalence of C-shaped canals was 1.1%. All mandibular second premolars had one root; 97.2% had one canal and 2.2% had two canals. The prevalence of C-shaped canals was 0.6%. The prevalence of multiple canals in mandibular first premolars was mainly of Type V, and mandibular second premolars had a low rate of canal variation in this western Chinese population. Root canal bifurcation occurred at the middle or apical third in most bicanal mandibular premolars. CBCT scanning can be used in the management of mandibular premolars with complex canal morphology

Long-term outcomes of mandibular kinematics following class II malocclusion therapy with removable functional appliance therapy.

Science.gov (United States)

Linsen, Sabine S; Wolf, Michael; Müßig, Dieter

2016-11-01

To evaluate mandibular kinematics in class I adults following class II therapy with removable functional appliances (RFAs) during the growth period in comparison with orthodontically untreated class I and II individuals. Condylar (CRoM) and incisal range of motion (InRoM), velocity during opening and closing, and the mandibular rotation angle were recorded using an ultrasound-based jaw-tracking system in 36 test patients (mean age = 28.03 ± 6.58 years). Significant group effects were found for CRoM towards the posterior in the right joint (p = 0.002) and InRoM towards the anterior (p = 0.043). The post hoc Tukey test indicates a significantly longer CRoM (posterior) for the right condyle in class II (p = 0.003) and RFA individuals (p = 0.023). The kinematic data imply greater dentoalveolar effects due to RFA therapy than adaptive remodeling of the temporomandibular joint. The class I relationship in the RFA group following treatment indicates stable long-term outcomes.

Fabricating CAD/CAM Implant-Retained Mandibular Bar Overdentures: A Clinical and Technical Overview

Directory of Open Access Journals (Sweden)

Chui Ling Goo

2017-01-01

Full Text Available This report describes the clinical and technical aspects in the oral rehabilitation of an edentulous patient with knife-edge ridge at the mandibular anterior edentulous region, using implant-retained overdentures. The application of computer-aided design and computer-aided manufacturing (CAD/CAM in the fabrication of the overdenture framework simplifies the laboratory process of the implant prostheses. The Nobel Procera CAD/CAM System was utilised to produce a lightweight titanium overdenture bar with locator attachments. It is proposed that the digital workflow of CAD/CAM milled implant overdenture bar allows us to avoid numerous technical steps and possibility of casting errors involved in the conventional casting of such bars.

Mandibular Deformity Correction by Distraction Osteogenesis

Directory of Open Access Journals (Sweden)

Md Asaduzzaman

2011-02-01

Full Text Available Distraction osteogenesis (DO is a biological process of new bone formation. It could be used as an alternative treatment method for the correction of mandibular hypoplastic deformity. Modern distraction osteogenesis evolved primarily from the work of Gavriel llizarov. DO has been first applied to craniofacial region since McCarthy et al. In this case report, the patient was 17 years old male with bird face deformity due to hypoplasia of mandible resulted from bilateral TMJ ankylosis due to the fracture of both condyle at the age of 4 years. Patient’s intraincisal opening was absent 1 year back. He underwent condylectomy in both sides to release the ankylosis and to increase intraincisal opening. His mandibular length was markedly short. To increase his mandibular antero-posterior length, mandibular body distraction was done in Oral and Maxillofacial Surgery department, BSMMU. Through this procedure length of the body of mandibule was increased by 10 mm, occlusion was edge to edge and his lower facial appearance increased markedly. Mandibular body distraction osteogenesis was considerably effective when performed in a hypoplastic mandible to facilitate post-operative functional and esthetic restoration. Long term follow-up is necessary to evaluate relapse and complications. DOI: 10.3329/bsmmuj.v3i2.7061BSMMU J 2010; 3(2: 103-106

A comparative study of the skeletal morphology of the temporo-mandibular joint of children and adults

Directory of Open Access Journals (Sweden)

Meng F

2008-01-01

Full Text Available Background: The skeletal morphology of the temporo-mandibular joint (TMJ is constantly remodeled. Aims and Objectives: A comparative study was undertaken to determine and characterize the differences in the skeletal morphology of TMJ of children and adults. Materials and Methods: The study was conducted on 30 children cadavers and 30 adult volunteers. Parameters that could reflect TMJ skeletal morphology were measured with a new technology combining helical computed tomography (CT scan with multi-planar reformation (MPR imaging. Results: Significant differences between children cadavers and adults were found in the following parameters ( P < 0.05: Condylar axis inclination, smallest area of condylar neck/largest area of condylar process, inclination of anterior slope in inner, middle, and outer one-third of condyle, anteroposterior/mediolateral dimension of condyle, length of anterior slope/posterior slope in inner and middle one-third of condyle, anteroposterior dimension of condyle/glenoid fossa, mediolateral dimension of condyle/glenoid fossa, inclination of anterior slope of glenoid fossa, depth of glenoid fossa, and anteroposterior/mediolateral dimension of glenoid fossa. Conclusion: There are significant differences of TMJ skeletal morphology between children and adults.

Patient satisfaction and dissatisfaction with mandibular two-implant overdentures using different attachment systems: 5-year outcomes.

Science.gov (United States)

Al-Zubeidi, Mohammed I; Alsabeeha, Nabeel H M; Thomson, W Murray; Payne, Alan G T

2012-10-01

Different attachment systems for mandibular two-implant overdentures could influence levels of patient satisfaction. Positive consensus of the majority of patients being satisfied does not preclude the possibility of dissatisfaction for some. To evaluate patient satisfaction and dissatisfaction before and after 5 years of wearing mandibular two implant overdentures using different attachment systems ; to determine the prognostic relevance of pretreatment complete denture complaints to treatment outcomes. A total of 106 edentulous participants enrolled in a clinical trial completed a preliminary self-report inventory of their original complete denture complaints.New complete maxillary dentures and mandibular two-implant overdentures were provided to each participant using one of six different attachment systems. Patient satisfaction was determined at pretreatment; at baseline with mandibular two-implant overdenture insertion; and then annually for 5 years, using visual analogue and Likert-type scales. Patient satisfaction with mandibular two-implant overdentures showed significant changes pre- to posttreatment(baseline) in all domains, but these were significant immediately and maintained without further significance for 5 years, other than pain with the overdenture. After 5 years, no significant differences were observed with all the attachment systems. Highly significant differences were found with some social and psychological aspects by the fifth year compared to baseline. Diagnostic and prognostic indicators from a pretreatment inventory identified 12 participants (13.5%) who were dissatisfied. These indicators revealed a maladaptive predisposition to mandibular two-implant overdentures. The provision of mandibular two-implant overdentures will, in the majority of patients, significantly enhance levels of patient satisfaction for 5 years, as compared to complete mandibular dentures, regardless of the attachment system. Careful evaluation of pretreatment

Malignant mandibular tumors: two case reports of rare mandibular ...

African Journals Online (AJOL)

Arun Kumar Agnihotri

2014-02-26

Feb 26, 2014 ... present two cases of rare malignant mandibular tumors in a single institution. KEY WORDS: .... Spiculated osteoblastic periosteal reaction was noted with mild ... displacement of right 2nd premolar and 2nd molar teeth were ...

The management of over closured anterior teeth due to attrition

Directory of Open Access Journals (Sweden)

Eha Djulaeha

2009-12-01

Full Text Available Background: Tooth is the hardest tissue in human body, that can be injured because of attrition process. For old people, denture attrition process is caused by psysiological process relating with the mastication function which also supported by some bad habits such an bruxism, premature contact, and consuming habit of abrasive food. Attrition or abrasion can also be happened with patien’t dentition who does not have teeth subtutition for long time due the lost of their maxillary as well as mandibulary. The pasient will loose their vertical dimension of occlusion, injure, and the lower jaw becomes over closed which is called over closure. Purpose: This article reported the management of over closured anterior teeth due to attrition. Case: a seventy six year old woman patient came to Prosthodontic Clinic in Faculty of Dentistry, Airlangga University, to rehabilitate her upper and lower severe attrited anterior teeth and her posterior teeth. The patient has experienced of wearing acrylic removable mandibular partial denture ten years ago. Unfortunaly, the denture was uncomfortable, and she did not wear it anymore since five years ago. Case management: The severe attrition of anterior teeth with the lost of occlusal vertical dimension can be treated by improving the occlusal vertical dimension gradually. The treatment is then followed by the increasing of the height of the anterior teeth by lengthening the crown teeth of upper jaw with 12 units of span bridge and the acrylic removable partial denture of lower jaw. Conclusion: The severe attrition of anterior teeth with the lost of occlusal vertical dimension can be treated by improving the occlusal vertical dimension gradually, using long span bridge and acrylic removable partial denture.

Comparison of conventional panoramic radiography and panoramic digital subtraction radiography in detection of simulated lesions of mandibular condyle

Directory of Open Access Journals (Sweden)

Panjnoush M.

2008-12-01

Full Text Available "n  "nBackground and Aim: Digital subtraction Radiography (DSR is a method of accurate assessing condylar head changes. several studies have been carried out in applying DSR in dentistry, however there is a few number of studies in efficacy of DSR method in assesment of condylar head changes, The aim of this study was to compare panoramic radiography and DSR detecting simulated lesions of the mandibular condyl. "nMaterials and Methods: this was a process reaserch study, in which two dry human skulls with no obvious temporomandibular joint pathology were used. Osteophytic lesions were simulated using three sizes of bone chips that were placed on the medial portion of anterior and superolateral aspects of the condyle. Osteolytic lesions were simulated making 1 and 2 mm holes using round burr in the central portion of anterior aspect and Lateral pole of the condyle. Panoramic radiographs were prepared with and without the lesions in place. These paired radiographs were digitized and digital- subtraction images of the original panoramic images were obtained. Eight observers evaluated 155 images of each modality for the presence or absence and the type of simulated lesions of the mandibular condyle. Sensitivity, specificity, reliability and measure of agreement were analyzed using kappa test and crossed tables and qualitative variables were assess by chi-square and fisher's Exact test. "nResults: Specificity of panoramic and DSR methods were 15.4% and 66.7% respectively. Sensitivity of panoramic and DSR methods were 61.1% and 80.6% for osteophytic lesions and 37.5% and 83.3% for Osteolytic lesions. The percentage of correct decisions made in DSR method was significantly more than conventional panoramic method (82.6% vs 41.9% (p<0.0001. "nConclusion: Based on the results of this study digital subtraction technique was significantly more accurate than the panoramic radiographs in detection of simulated lesions of the mandibular condyle.

Mandibular reconstruction in the radiated patient: the role of osteocutaneous free tissue transfers

International Nuclear Information System (INIS)

Duncan, M.J.; Manktelow, R.T.; Zuker, R.M.; Rosen, I.B.

1985-01-01

This paper discusses our experience with the second metatarsal and iliac crest osteocutaneous transfers for mandibular reconstruction. The prime indication for this type of reconstruction was for anterior mandibular defects when the patient had been previously resected. Midbody to midbody defects were reconstructed with the metatarsal and larger defects with the iliac crest. In most cases, an osteotomy was done to create a mental angle. The evaluation of speech, oral continence, and swallowing revealed good results in all patients unless lip or tongue resection compromised function. Facial contour was excellent in metatarsal reconstructions. The iliac crest cutaneous flap provided a generous supply of skin for both intraoral reconstruction and external skin coverage but tended to be bulky, particularly when used in the submental area. Thirty three of 36 flaps survived completely. Flap losses were due to anastomosis thrombosis (1), pedicle compression (1), and pedicle destruction during exploration for suspected carotid blowout (1). Ninety three percent of bone junctions developed a solid bony union despite the mandible having had a full therapeutic dose of preoperative radiation. Despite wound infections in 8 patients, and intraoral dehiscence with bone exposure in 12 patients, all but one of these transfers went on to good bony union without infection in the bone graft

Mandibular reconstruction in the radiated patient: the role of osteocutaneous free tissue transfers

Energy Technology Data Exchange (ETDEWEB)

Duncan, M.J.; Manktelow, R.T.; Zuker, R.M.; Rosen, I.B.

1985-12-01

This paper discusses our experience with the second metatarsal and iliac crest osteocutaneous transfers for mandibular reconstruction. The prime indication for this type of reconstruction was for anterior mandibular defects when the patient had been previously resected. Midbody to midbody defects were reconstructed with the metatarsal and larger defects with the iliac crest. In most cases, an osteotomy was done to create a mental angle. The evaluation of speech, oral continence, and swallowing revealed good results in all patients unless lip or tongue resection compromised function. Facial contour was excellent in metatarsal reconstructions. The iliac crest cutaneous flap provided a generous supply of skin for both intraoral reconstruction and external skin coverage but tended to be bulky, particularly when used in the submental area. Thirty three of 36 flaps survived completely. Flap losses were due to anastomosis thrombosis (1), pedicle compression (1), and pedicle destruction during exploration for suspected carotid blowout (1). Ninety three percent of bone junctions developed a solid bony union despite the mandible having had a full therapeutic dose of preoperative radiation. Despite wound infections in 8 patients, and intraoral dehiscence with bone exposure in 12 patients, all but one of these transfers went on to good bony union without infection in the bone graft.

Topographical evaluation of the mandibular canal through panoramic radiograph

Directory of Open Access Journals (Sweden)

Ingrid Macedo Oliveira

2016-10-01

Full Text Available The mandibular canal is located inside the body of the mandible and may have anatomical variations. The topographic knowledge of the mandibular canal by the Dental surgeons is fundamental to achieving success in surgical planning, anesthetics and clinical interventions involving the jaw. To study the anatomy of the mandibular canal through panoramic radiographs. A retrospective descriptive study, developed after review and approval by the Ethics and Research Committee with the number of opinion 431095. Were analyzed 252 panoramic radiographs of patients of male and female attended in dental clinics UNINOVAFAPI University Center, Teresina-Pi, Brazil. The radiographs were analyzed with the aid of a light box and each antimere the jaw was observed separately. The classification of Nortjé and Langlais for description of the topography of the mandibular canal were used. Descriptive statistical analysis was performed with SPSS version 18.0. There was a prevalence of 38.89% in both antimeres, of mandibular channel the Type II. The type IV was present in 25.4% in the right hemi-arch and 26.6% on the left. Mandibular canal with unilateral bifurcation was observed in 0.77% of the sample and molar straight channel has not been identified. We observed anatomical variations as for the number and path, of the mandibular canal with the highest prevalence of Types II and IV, and the absence of bifurcations. Most was mandibular channels showed no bifurcation. The panoramic radiograph showed up an aid important to identify the mandibular canal and its variations.

An anterior signaling center patterns and sizes the anterior neuroectoderm of the sea urchin embryo.

Science.gov (United States)

Range, Ryan C; Wei, Zheng

2016-05-01

Anterior signaling centers help specify and pattern the early anterior neuroectoderm (ANE) in many deuterostomes. In sea urchin the ANE is restricted to the anterior of the late blastula stage embryo, where it forms a simple neural territory comprising several types of neurons as well as the apical tuft. Here, we show that during early development, the sea urchin ANE territory separates into inner and outer regulatory domains that express the cardinal ANE transcriptional regulators FoxQ2 and Six3, respectively. FoxQ2 drives this patterning process, which is required to eliminate six3 expression from the inner domain and activate the expression of Dkk3 and sFRP1/5, two secreted Wnt modulators. Dkk3 and low expression levels of sFRP1/5 act additively to potentiate the Wnt/JNK signaling pathway governing the positioning of the ANE territory around the anterior pole, whereas high expression levels of sFRP1/5 antagonize Wnt/JNK signaling. sFRP1/5 and Dkk3 levels are rigidly maintained via autorepressive and cross-repressive interactions with Wnt signaling components and additional ANE transcription factors. Together, these data support a model in which FoxQ2 initiates an anterior patterning center that implements correct size and positions of ANE structures. Comparisons of functional and expression studies in sea urchin, hemichordate and chordate embryos reveal striking similarities among deuterostome ANE regulatory networks and the molecular mechanism that positions and defines ANE borders. These data strongly support the idea that the sea urchin embryo uses an ancient anterior patterning system that was present in the common ambulacrarian/chordate ancestor. © 2016. Published by The Company of Biologists Ltd.

Prosthodontic management of mandibular deviation using palatal ramp appliance

Directory of Open Access Journals (Sweden)

Prince Kumar

2012-08-01

Full Text Available Segmental resection of the mandible generally results in deviation of the mandible to the defective side. This loss of continuity of the mandible destroys the balance of the lower face and leads to decreased mandibular function by deviation of the residual segment toward the surgical site. Prosthetic methods advocated to reduce or eliminate mandibular deviation include intermaxillary fixation, removable mandibular guide flange, palatal ramp, implant-supported prosthesis and palatal guidance restorations which may be useful in reducing mandibular deviation and improving masticatory performance and efficiency. These methods and restorations would be combined with a well organized mandibular exercise regimen. This clinical report describes the rehabilitation following segmental mandibulectomy using palatal ramp prosthesis.

Skeletal maturity assessment using mandibular canine calcification stages

Directory of Open Access Journals (Sweden)

Vildana Džemidžić

2016-11-01

Full Text Available Objective. The aims of this study were: to investigate the relationship between mandibular canine calcification stages and skeletal maturity; and to evaluate whether the mandibular canine calcification stages may be used as a reliable diagnostic tool for skeletal maturity assessment. Materials and methods. This study included 151 subjects: 81 females and 70 males, with ages ranging from 9 to 16 years (mean age: 12.29±1.86 years. The inclusion criteria for subjects were as follows: age between 9 and 16 years; good general health without any hormonal, nutritional, growth or dental development problems. Subjects who were undergoing or had previously received orthodontic treatment were not included in this study. The calcification stages of the left permanent mandibular canine were assessed according to the method of Demirjian, on panoramic radiographs. Assessment of skeletal maturity was carried out using the cervical vertebral maturation index (CVMI, as proposed by the Hassel-Farman method, on lateral cephalograms. The correlation between the calcification stages of mandibular canine and skeletal maturity was estimated separately for male and female subjects. Results. Correlation coefficients between calcification stages of mandibular canine and skeletal maturity were 0.895 for male and 0.701 for female subjects. Conclusions. A significant correlation was found between the calcification stages of the mandibular canine and skeletal maturity. The calcification stages of the mandibular canine show a satisfactory diagnostic performance only for assessment of pre-pubertal growth phase.

Anatomical relationship between mental foramen, mandibular teeth and risk of nerve injury with endodontic treatment.

Science.gov (United States)

Chong, Bun San; Gohil, Kajal; Pawar, Ravikiran; Makdissi, Jimmy

2017-01-01

The objective of the present study was to evaluate the anatomical relationship between mental foramen (MF), including the incidence of the anterior loop of the inferior alveolar nerve (AL), and roots of mandibular teeth in relation to risk of nerve injury with endodontic treatment. Cone-beam computed tomography (CBCT) images, which included teeth either side of the MF, were randomly selected. The anonymised CBCT images were reconstructed and examined in coronal, axial and sagittal planes, using three-dimensional viewing software, to determine the relationship and distance between MF and adjacent mandibular teeth. The actual distance between the root apex and MF was calculated mathematically using Pythagoras' theorem. If present, the incidence of an AL in the axial plane was also recorded. The root apex of the mandibular second premolar (70 %), followed by the first premolar (18 %) and then the first molar (12 %), was the closest to the MF. Ninety-six percent of root apices evaluated were >3 mm from the MF. An AL was present in 88 % of the cases. With regards to endodontic treatment, the risk of nerve injury in the vicinity of the MF would appear to be low. However, the high incidence of the AL highlights the need for clinicians to be aware and careful of this important anatomical feature. The risk of injury to the MN with endodontic treatment would appear to be low, but given the high incidence, it is important to be aware and be careful of the AL.

A radiographic study of temporomandibular joints in skeletal class III malocclusion

International Nuclear Information System (INIS)

Kim, Sung Eun; Kim, Kae Duk

2003-01-01

To investigate the differences between the position of the mandibular condyles in temporomandibular joints of patients presenting with normal occlusion and skeletal class III malocclusion. Forty-two subjects with normal occlusion and thirty-seven subjects exhibiting skeletal class III malocclusion prior to orthodontic treatment were included in the study. Transcranial radiographs of each subject were taken at centric occlusion and 1 inch mouth opening. The positional relationship between the mandibular condyles with articular fossae and articular eminences at two positional states were evaluated and analyzed statistically. The mandibular condyles of the skeletal class III malocclusion group were found to be located more anteriorly from the center of the articular fossae compared to the normal occlusion group in centric occlusion. The mandibular condyles of the skeletal Class III malocclusion group were located more superiorly from the middle of articular height than those of the normal occlusion group in centric occlusion. However, these differences were not statistically significant. At 1 inch mouth opening, the mandibular condyles of the skeletal class III malocclusion group were placed more posteriorly from the articular eminences than those of the normal occlusion group. The mean angle of the articular eminence posterior slope were 56.51 .deg. ± 6.29 .deg. in the normal occlusion group and 60.37 .deg. ± 6.26 .deg. in the skeletal Class III malocclusion group. The mandibular condyles of the skeletal Class III malocclusion group were placed more anteriorly at centric occlusion and more posteriorly at 1 inch mouth opening when compared with those of the normal occlusion group.

A radiographic study of temporomandibular joints in skeletal class III malocclusion

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung Eun; Kim, Kae Duk [Chosun University College of Medicine, Kwangju (Korea, Republic of)

2003-06-15

To investigate the differences between the position of the mandibular condyles in temporomandibular joints of patients presenting with normal occlusion and skeletal class III malocclusion. Forty-two subjects with normal occlusion and thirty-seven subjects exhibiting skeletal class III malocclusion prior to orthodontic treatment were included in the study. Transcranial radiographs of each subject were taken at centric occlusion and 1 inch mouth opening. The positional relationship between the mandibular condyles with articular fossae and articular eminences at two positional states were evaluated and analyzed statistically. The mandibular condyles of the skeletal class III malocclusion group were found to be located more anteriorly from the center of the articular fossae compared to the normal occlusion group in centric occlusion. The mandibular condyles of the skeletal Class III malocclusion group were located more superiorly from the middle of articular height than those of the normal occlusion group in centric occlusion. However, these differences were not statistically significant. At 1 inch mouth opening, the mandibular condyles of the skeletal class III malocclusion group were placed more posteriorly from the articular eminences than those of the normal occlusion group. The mean angle of the articular eminence posterior slope were 56.51 .deg. {+-} 6.29 .deg. in the normal occlusion group and 60.37 .deg. {+-} 6.26 .deg. in the skeletal Class III malocclusion group. The mandibular condyles of the skeletal Class III malocclusion group were placed more anteriorly at centric occlusion and more posteriorly at 1 inch mouth opening when compared with those of the normal occlusion group.

The relationship between the changes in three-dimensional facial morphology and mandibular movement after orthognathic surgery.

Science.gov (United States)

Kim, Dae-Seung; Huh, Kyung-Hoe; Lee, Sam-Sun; Heo, Min-Suk; Choi, Soon-Chul; Hwang, Soon-Jung; Yi, Won-Jin

2013-10-01

The purpose of this study was to investigate the relationship between changes in three-dimensional (3D) facial morphology and mandibular movement after orthognathic surgery. We hypothesized that facial morphology changes after orthognathic surgery exert effects on 3D mandibular movement. We conducted a prospective follow-up study of patients who had undergone orthognathic surgical procedures. Three-dimensional facial morphological values were measured from facial CT images before and three months after orthognathic surgery. Three-dimensional maximum mandibular opening (MMO) values of four points (bilateral condylions, infradentale, and pogonion) were also measured using a mandibular movement tracking and simulation system. The predictor variables were changes in morphological parameters divided into two groups (deviated side (DS) or contralateral side (CS) groups), and the outcome variables were changes in the MMO at four points. We evaluated 21 subjects who had undergone orthognathic surgical procedures. Alterations in the TFH (total facial height), LFH (lower facial height), CS MBL (mandibular body length), and DS RL (ramus length) were negatively correlated with changes in bilateral condylar movement. The UFH, DS MBL and CS ML (mandibular length) showed correlations with infradentale movement. The CS ML, DS ML, MBL, UFH, and SNB were correlated with pogonion movement. The height of the face is most likely to affect post-operative mandibular movement, and is negatively correlated with movement changes in the condyles, infradentale and pogonion. The changes in CS morphological parameters are more correlated with mandibular movement changes than the DS. The changes in CS MBL and bilateral RL were negatively correlated with condylar movement changes, while the bilateral MBL and CS ML were positively correlated with changes in infradentale and pogonion. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights

[Temporo-mandibular joints and orthognathic surgery].

Science.gov (United States)

Bouletreau, P

2016-09-01

Temporo-Mandibular Joints (TMJ) and orthognathic surgery are closely linked. In the past, some authors have even described (with mixed results) the correction of some dysmorphosis through direct procedures on the TMJs. Nowadays, performing orthognathic surgery involves the TMJ in three different occasions: (1) TMJ disorders potentially responsible for dento-maxillary dysmorphosis, (2) effects of orthognathic surgery on TMJs, and (3) condylar positioning methods in orthognathic surgery. These three chapters are developed in order to focus on the close relationships between TMJ and orthognathic surgery. Some perspectives close this article. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

[3D mandibular distraction planification in a case of severe temporomandibular ankylosis].

Science.gov (United States)

Weber, E; Meyer, C; Ernoult, C; Chatelain, B; Benassarou, M

2015-06-01

When occurring in childhood, temporomandibular ankylosis joint is responsible for complex maxillofacial deformities, including mandibular growth deficiency. We present a case of temporomandibular joint ankylosis associated with severe mandibular asymmetry treated by mandibular bone distraction performed under computer assistance. A 27-year-old patient presented with a severe facial asymmetry consisting in hypoplasia of the left hemi-mandible and maxilla. Mouth opening was non-existent. The CT-scan showed a left temporomandibular ankylosis. A left mandibular distraction was decided. The distraction characteristics (choice and positioning of the distractor, axis and amount of distraction) were determined preoperatively on the 3D CT-scan. The planning has been transferred to a navigation console (Kolibri®, Brainlab®). A combined intraoral and cutaneous was performed. Navigation allowed for an appropriate placement of the osteotomy line and fixation of the distractor. Distraction was started at the 5th postoperative day at the rate of 1mm per day and lasted 25 days without complication. 3D planning allows for better indication setting, better preparation of the procedure, reducing complications and operative time. It may help as an educational tool for young surgeons and for a better understanding from the patient. Navigation is an accurate method for the transfer of the planning in the operation room. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Pattern of maxillary and mandibular proximal enamel thickness at the contact area of the permanent dentition from first molar to first molar.

Science.gov (United States)

Sarig, Rachel; Vardimon, Alexander D; Sussan, Celine; Benny, Lea; Sarne, Ofer; Hershkovitz, Israel; Shpack, Nir

2015-04-01

Proximal enamel thickness (PET) at the mesial and distal contact areas of the complete permanent dentition has not been previously reported. Anatomic investigation of PET is essential for interproximal reduction treatment. Our objectives were to measure the PETs of the complete maxillary and mandibular dentitions at the contact areas, to compare the PETs of adjacent teeth, and to evaluate the vertical position of each contact area. We evaluated 720 extracted teeth; of these, 109 intact teeth were selected. The mesial and distal contact areas were demarcated, and each tooth was embedded in transparent epoxy resin. Blocks were prepared so that the 2 demarcated contact areas were exposed, and 6 measurements were taken and statistically analyzed. Both jaws showed the same PET pattern characterized by 5 features: PET increased progressively from incisor (0.63 mm) to first molar (1.48 mm). Per tooth, mesial and distal PET did not differ. Total maxillary (26.86 mm) and mandibular (24.52 mm) PETs were similar. Paired PETs at the interproximal interface were similar, with the exception of the lateral incisor-canine interfaces. From incisor to first molar, the contact area becomes located farther gingivally. The existing guideline of maximal 0.5-mm interproximal reduction per 2 adjacent teeth should be kept in the anterior region and could be increased to 1 mm in the posterior region, when an equal amount is removed. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

The effect of mandibular position and gantry angle on the evaluation of implant site with implant CT

International Nuclear Information System (INIS)

Lee, Sul Mi; An, Chang Hyeon; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul; Park, Tae Won; Choi, Hang Moon

2002-01-01

The altered gantry angle during scanning for some multiplanar reconstruction CT program (CT/MPR) may cause distortion of the image. The aim of this study was to ascertain whether there is a image distortion in a reformatted image when the gantry and the object are equally inclined using ToothPix and DentaScan program.A resin block model with four cylindrical holes and a human dry mandible were used. Two MPR software packages, ToothPix and DentaScan program, were used for reformatted panoramic images. The block and the gantry were equally inclined at 0 degree, 15 degrees, and 30 degrees. With ToothPix program, a resin block model with empty holes and a dry mandible showed inclined images in the reformatted panoramic image. Increasing the gantry angle, the depth and inclination of the holes were increased in the reformatted central panoramic images. However, a resin block model with gutta percha in its holes and a dry mandible with a wire in its mandibular canal didn't show image distortion. With DentaScan program, image distortion was not seen in any situation. ToothPix program may distort the reformatted image when the gantry angle is not at zero degrees. However, with DentaScan program, the patient may be positioned comfortably and the gantry can be adjusted to the patient positioning.

Ultrasound and multidetector computed tomography of mandibular ...

African Journals Online (AJOL)

Because of local invasivity and high metastatic potential, preoperative imaging evaluation of mandibular region and tumoral staging is essential along with biopsy sampling. The present manuscript describes the ultrasound and computed tomographic imaging findings of mandibular gland adenocarcinoma in two dogs and ...

Influence of mandibular length on mouth opening

NARCIS (Netherlands)

Dijkstra, PU; Hof, AL; Stegenga, B; De Bont, LGM

Theoretically, mouth opening not only reflects the mobility of the temporomandibular joints (TMJs) but also the mandibular length. Clinically, the exact relationship between mouth opening, mandibular length, and mobility of TMJs is unclear. To study this relationship 91 healthy subjects, 59 women

Evaluation of the Location of Mandibular Foramen as an Anatomic Landmark Using CBCT Images: A Pioneering Study in an Iranian Population

OpenAIRE

Shokri, Abbas; Department of Oral & Maxillofacial Radiology – School of Dentistry – Hamadan University of Medical Sciences – Hamadan – Iran.; Falah-Kooshki, Sepideh; Department of Oral & Maxillofacial Radiology – School of Dentistry – Hamadan University of Medical Sciences – Hamadan – Iran.; Poorolajal, Jalal; Research Center for Modeling of Noncommunicable Diseases – Department of Epidemiology & Biostatistics – School of Public Health – Hamadan University of Medical Sciences – Hamadan – Iran.; Karimi, Atena; Department of Oral & Maxillofacial Radiology – School of Dentistry – Hamadan University of Medical Sciences – Hamadan – Iran.; Ostovarrad, Farzaneh; Department of Oral & Maxillofacial Radiology – School of Dentistry – Hamadan University of Medical Sciences – Hamadan – Iran.

2014-01-01

Objective: Mandibular foramen (MF) is located on the internal surface of the ramus through which blood vessels and nerves pass. Determination of the anatomic position of the MF is very important in inferior alveolar nerve block anesthesia (IANBA), ramus osteotomy and surgical procedures of the posterior angle of mandibular ramus. The aim of this study was to determine anatomic position of the MF using anatomic landmarks on the three dimensional CBCT images. Material and Methods: A total of 10...

Managing the severely proclined maxillary anteriors by extracting traumatized right maxillary central incisor

Directory of Open Access Journals (Sweden)

Mahesh Jain

2014-01-01

Full Text Available A 14-year-old girl reported with severely proclined maxillary anterior teeth with fractured and discolored right maxillary central incisor with questionable prognosis. Autotransplantation of premolar to replace central incisor was considered a risky option as patient was 14-year-old with presence of advanced root development of premolar. The immediate placement of the prosthetic implant was also not possible because of patient′s age. Therefore, it was decided to use the space obtained by extracting questionable maxillary right central incisor for orthodontic purpose and also sacrificing the healthy premolar is invariably an excessive biological cost for a modest functional and aesthetic gain. Hence, the treatment plan for this case includes extraction of right maxillary central incisor and left maxillary first premolar, movement of right maxillary lateral incisor mesially, achieving normal axial inclination of maxillary anteriors with normal overjet and overbite. Mandibular arch was treated nonextraction due to congenitally missing central incisors with presence of normally inclined lower anteriors thereby maintaining Angles class I occlusion. Tipping, usually, seen in Begg mechanotherapy was used for our advantage to correct severely proclined maxillary anteriors with simultaneous bite opening mechanics. Case was completed in 19 months and posttreatment records including photographs, radiographs and study models were made. Begg wrap around the retainer was placed in the maxillary arch allowing natural settling of occlusion.

[Mandibular advancement devices in the treatment of obstructive sleep apnea].

Science.gov (United States)

Korczyński, Piotr; Górska, Katarzyna; Wilk, Krzysztof; Bielicki, Piotr; Byśkiniewicz, Krzysztof; Baczkowski, Tadeusz

2004-12-01

Obstructive sleep apnea (OSA) affects approximately 450,000 people in Poland. Use of nasal continuous positive airway pressure (nCPAP) devices and laryngeal surgery are widely accepted OSA treatment methods. In 1995 ASDA approved oral devices for treatment of OSA patients. The aim of the study was to determine efficiency of mandibular advancement devices (MAD) in OSA therapy. The study group included 20 patients with OSA, all of whom did not tolerate nCPAP and did not have indications or did not agree for surgical treatment. Control polysomnography was carried out in 11 patients using MAD. In 64% of patients AHI was lower then 10. No correlation between MAD use and AHI values was found. 45% of patients declared improvement of sleep quality and life comfort. Use of mandibular advancement devices is an important alternative therapy of OSA.

Transoral versus extraoral approach for mandibular angle fractures: A comparative study

Directory of Open Access Journals (Sweden)

Sathya Kumar Devireddy

2014-01-01

Full Text Available Introduction: Mandibular fractures represent approximately two-thirds of all the maxillofacial fractures (nearly 70% out of which fractures of mandibular angle represent for 26-35%. Aim of the Study: The aim of this study is to compare the transoral and extraoral (submandibular approaches for fixation of mandibular angle fractures. Objectives of Study: The objectives of the following study are to evaluate ease of accessibility, time taken for the procedure, ease of anatomic reduction and complications. Materials and Methods: A prospective study was carried out in 30 patients reporting to the Department of Oral and Maxillofacial surgery, Narayana Dental College and Hospital, Nellore, Andhra Pradesh during the period of months from November 2011 to August 2013 who were randomly divided in two groups based on computer generated simple randomization chart. Group I patients underwent transoral reduction and fixation and Group II patients underwent extraoral reduction and fixation. The ease of accessibility was analysed by visual analogue scale by the operating surgeon, time taken from incision to closure with digital clock, difficulty level index of surgeon based on the time taken for the procedure and approach related complications. Results: The ease of accessibility in Group I was good in 53.3% while in Group II patients approached extraorally it was good in 86.7%. Group I patients approached transorally showed a mean of 49.7 min while that of Group II patients approached extraorally showed a mean of 73.4 min. Group I had a minimum difficulty level index in 60%, moderate difficulty level in 33.3% and severe difficulty level in 6.7% while Group II had a minimum and moderate difficulty level in 46.7% and severe difficulty level in 6.7%. There was 1 (6.7% complication reported in each group. Conclusion: The statistical analysis of this study concludes that fracture line starting anterior to mandibular third molar and ending at anteroinferior border of

Radiographic technique and brackets affect measurements of proximal enamel thickness on mandibular incisors

NARCIS (Netherlands)

Ang, Amy Giok Phing; Steegmans, Pauline Antoinette Josephine; Kerdijk, Wouter; Livas, Christos; Ren, Yijin

2017-01-01

Objective: To investigate the influence of radiographic film and tube positioning, the presence and the size of brackets on in vitro measurements of proximal enamel thickness of mandibular incisors on periapical radiographs aimed to aid planning of interproximal enamel reduction procedures in

Incidence and characteristics of mandibular accessory canals: A radiographic investigation.

Science.gov (United States)

Borgonovo, Andrea Enrico; Taschieri, Silvio; Vavassori, Virna; Re, Dino; Francetti, Luca; Corbella, Stefano

2017-11-01

The aim of the present study was to explore, through tridimensional reconstructions of cone-beam computed tomography (CBCT) scans, the presence and the characteristics of mandibular accessory canals. For each included participant, the presence of accessory canals was recorded. The diameter of the canal, as well as the distance between the canal walls and the walls of the mandibular bone (lingual, buccal, cranial and caudal), were measured and recorded. Mandibular accessory canals could be found in 8.8% of participants. Retromolar canals were the most frequently found accessory mandibular canals. Accessory mandibular canals were found in a relatively high number of participants through the examination of CBCT scans and tridimensional reconstruction. The presence of such structures should be considered cautiously when planning and performing surgical interventions in mandibular area. © 2017 John Wiley & Sons Australia, Ltd.

Risk Factors and Dose-Effect Relationship for Mandibular Osteoradionecrosis in Oral and Oropharyngeal Cancer Patients

International Nuclear Information System (INIS)

Lee, Ik Jae; Koom, Woong Sub; Lee, Chang Geol; Kim, Yong Bae; Yoo, Sei Whan; Keum, Ki Chang; Kim, Gwi Eon; Choi, Eun Chang; Cha, In Ho

2009-01-01

Purpose: To analyze risk factors and the dose-effect relationship for osteoradionecrosis (ORN) of the mandible after radiotherapy of oral and oropharyngeal cancers. Materials and Methods: One-hundred ninety-eight patients with oral (45%) and oropharyngeal cancer (55%) who had received external radiotherapy between 1990 and 2000 were retrospectively reviewed. All patients had a dental evaluation before radiotherapy. The median radiation dose was 60 Gy (range, 16-75 Gy), and the median biologically effective dose for late effects (BED late ) in bone was 114 Gy 2 (range, 30-167 Gy 2 ). Results: The frequency of ORN was 13 patients (6.6%). Among patients with mandibular surgery, eight had ORN at the surgical site. Among patients without mandibular surgery, five patients had ORN on the molar area of the mandible. The median time to ORN was 22 months (range, 1-69 months). Univariate analysis revealed that mandibular surgery and Co-60 were significant risk factors for ORN (p = 0.01 and 0.04, respectively). In multivariate analysis, mandibular surgery was the most important factor (p = 0.001). High radiation doses over BED 102.6 Gy 2 (conventional dose of 54 Gy at 1.8 Gy/fraction) were also a significant factor for ORN (p = 0.008) and showed a positive dose-effect relationship in logistic regression (p = 0.04) for patients who had undergone mandibular surgery. Conclusions: Mandibular surgery was the most significant risk factor for ORN of mandible in oral and oropharyngeal cancers patients. A BED of 102.6 Gy 2 or higher to the mandible also significantly increases the risk of ORN.

Determination of mandibular border and functional movement protocols using an electromagnetic articulograph (EMA).

Science.gov (United States)

Fuentes, Ramon; Navarro, Pablo; Curiqueo, Aldo; Ottone, Nicolas E

2015-01-01

The electromagnetic articulograph (EMA) is a device that can collect movement data by positioning sensors at multiple points, measuring displacements of the structure in real time, as well as the acoustics and mechanics of speech using a microphone connected to the measurement system. The aim of this study is to describe protocols for the generation, measurement and visualization of mandibular border and functional movements in the three spatial planes (frontal, sagittal and horizontal) using the EMA. The EMA has transmitter coils that determine magnetic fields to collect information about movements from sensors located on different structures (tongue, palate, mouth, incisors, skin, etc.) and in every direction in an area of 300 mm. After measurement with the EMA, the information is transferred to a computer and read with the Visartico software to visualize the recording of the mandibular movements registered by the EMA. The sensors placed in the space between the three axes XYZ are observed, and then the plots created from the mandibular movements included in the corresponding protocol can be visualized, enabling interpretation of these data. Four protocols for the obtaining of images of the opening and closing mandibular movements were defined and developed, as well as border movements in the frontal, sagittal and horizontal planes, managing to accurately reproduce Posselt's diagram and Gothic arch on the latter two axes. Measurements with the EMA will allow more exact data to be collected in relation to the mandibular clinical physiology and morphology, which will permit more accurate diagnoses and application of more precise and adjusted treatments in the future.

Determination of mandibular border and functional movement protocols using an electromagnetic articulograph (EMA)

Science.gov (United States)

Fuentes, Ramon; Navarro, Pablo; Curiqueo, Aldo; Ottone, Nicolas E

2015-01-01

The electromagnetic articulograph (EMA) is a device that can collect movement data by positioning sensors at multiple points, measuring displacements of the structure in real time, as well as the acoustics and mechanics of speech using a microphone connected to the measurement system. The aim of this study is to describe protocols for the generation, measurement and visualization of mandibular border and functional movements in the three spatial planes (frontal, sagittal and horizontal) using the EMA. The EMA has transmitter coils that determine magnetic fields to collect information about movements from sensors located on different structures (tongue, palate, mouth, incisors, skin, etc.) and in every direction in an area of 300 mm. After measurement with the EMA, the information is transferred to a computer and read with the Visartico software to visualize the recording of the mandibular movements registered by the EMA. The sensors placed in the space between the three axes XYZ are observed, and then the plots created from the mandibular movements included in the corresponding protocol can be visualized, enabling interpretation of these data. Four protocols for the obtaining of images of the opening and closing mandibular movements were defined and developed, as well as border movements in the frontal, sagittal and horizontal planes, managing to accurately reproduce Posselt’s diagram and Gothic arch on the latter two axes. Measurements with the EMA will allow more exact data to be collected in relation to the mandibular clinical physiology and morphology, which will permit more accurate diagnoses and application of more precise and adjusted treatments in the future. PMID:26884903

Split-Framework in Mandibular Implant-Supported Prosthesis

Directory of Open Access Journals (Sweden)

Danny Omar Mendoza Marin

2015-01-01

Full Text Available During oral rehabilitation of an edentulous patient with an implant-supported prosthesis, mandibular flexure must be considered an important biomechanical factor when planning the metal framework design, especially if implants are installed posterior to the interforaminal region. When an edentulous mandible is restored with a fixed implant-supported prosthesis connected by a fixed full-arch framework, mandibular flexure may cause needless stress in the overall restorative system and lead to screw loosening, poor fit of prosthesis, loss of the posterior implant, and patient’s discomfort due to deformation properties of the mandible during functional movements. The use of a split-framework could decrease the stress with a precise and passive fit on the implants and restore a more natural functional condition of the mandible, helping in the longevity of the prosthesis. Therefore, the present clinical report describes the oral rehabilitation of an edentulous patient by a mandibular fixed implant-supported prosthesis with a split-framework to compensate for mandibular flexure. Clinical Significance. The present clinical report shows that the use of a split-framework reduced the risk of loss of the posterior implants or screws loosening with acceptable patient comfort over the period of a year. The split-framework might have compensated for the mandibular flexure during functional activities.

The Influence of a Mandibular Advancement Plate on Polysomnography in Different Grades of Obstructive Sleep Apnea

Directory of Open Access Journals (Sweden)

Antti Raunio

2015-03-01

Full Text Available Objectives: The purpose of this study was to investigate the effect of a mandibular advancement device on different grades of obstructive sleep apnea using a relatively simple test for the apnea-hypopnea index to determine if a mandibular device will be effective. Material and Methods: A total of 68 patients with obstructive sleep apnea syndrome (OSAS including, 31 with mild, 23 with moderate and 14 with severe OSAS were treated with a mandibular advancement device (MAD and monitored with polysomnography. Results: 25 of the 31 mild, 15 of the 23 moderate and 2 of the 14 severe OSAS patients were cured of their OSAS if a post treatment apnea-hypopnea index of less than 5 is regarded as cured. The odds ratios for success with MAD therapy are 3 for women over men, 14.9 for mild obstructive sleep apnea, 5.42 for moderate obstructive sleep apnea if severe obstructive sleep apnea is assigned an odds ratio of 1. Conclusions: The use of the apnea-hypopnea index alone is useful in mild and moderate disease to predict the effectiveness of mandibular advancement device. Treatment with a mandibular advancement device is very effective in treating mild and moderate obstructive sleep apnea. Conservative treatment with a mandibular advancement device can be successful in less severe grades of sleep apnea and may be an alternative for non-surgical patients with severe obstructive sleep apnea intolerant of Continuous Positive Airway Pressure management.

Intrinsic Vertebral Markers for Spinal Level Localization in Anterior Cervical Spine Surgery: A Preliminary Report.

Science.gov (United States)

Jha, Deepak Kumar; Thakur, Anil; Jain, Mukul; Arya, Arvind; Tripathi, Chandrabhushan; Kumari, Rima; Kushwaha, Suman

2016-12-01

Prospective clinical study. To observe the usefulness of anterior cervical osteophytes as intrinsic markers for spinal level localization (SLL) during sub-axial cervical spinal surgery via the anterior approach. Various landmarks, such as the mandibular angle, hyoid bone, thyroid cartilage, first cricoid ring, and C6 carotid tubercle, are used for gross cervical SLL; however, none are used during cervical spinal surgery via the anterior approach. We present our preliminary assessment of SLL over anterior vertebral surfaces (i.e., intrinsic markers) in 48 consecutive cases of anterior cervical spinal surgeries for the disc-osteophyte complex (DOC) in degenerative diseases and granulation or tumor tissue associated with infectious or neoplastic diseases, respectively, at an ill-equipped center. This prospective study on patients undergoing anterior cervical surgery for various sub-axial cervical spinal pathologies aimed to evaluate the feasibility and accuracy of SLL via intraoperative palpation of disease-related morphological changes on anterior vertebral surfaces visible on preoperative midline sagittal T1/2-weighted magnetic resonance images. During a 3-year period, 48 patients (38 males,10 females; average age, 43.58 years) who underwent surgery via the anterior approach for various sub-axial cervical spinal pathologies, including degenerative disease (n= 42), tubercular infection (Pott's disease; n=3), traumatic prolapsed disc (n=2), and a metastatic lesion from thyroid carcinoma (n=1), comprised the study group. Intrinsic marker palpation yielded accurate SLL in 79% of patients (n=38). Among those with degenerative diseases (n=42), intrinsic marker palpation yielded accurate SLL in 76% of patients (n=32). Intrinsic marker palpation is an attractive potential adjunct for SLL during cervical spinal surgeries via the anterior approach in well-selected patients at ill-equipped centers (e.g., those found in developing countries). This technique may prove helpful

Pediatric mandibular fractures treated by rigid internal fixation.

Science.gov (United States)

Wong, G B

1993-09-01

Mandibular fractures in the pediatric patient population are relatively uncommon. These patients present with their own unique treatment requirements. Most fractures have been treated conservatively by dental splints. Closed reduction techniques with maxillomandibular fixation (MMF) in very young children can pose several concerns, including cooperation, compliance and adequate nutritional intake. Rigid internal fixation of unstable mandibular fractures using miniplates and screws circumvents the need for MMF and allows immediate jaw mobilization. At major pediatric trauma institutions, there has been an increasing trend toward the use of this treatment when open reduction is necessary. This article presents a report of a five-year-old child who presented with bilateral mandibular fractures and was treated by rigid internal fixation and immediate mandibular mobilization.

Comprehensive therapy of a fusion between a mandibular lateral incisor and supernumerary tooth: case report.

Science.gov (United States)

Onçag, Ozant; Candan, Umit; Arikan, Fatih

2005-08-01

The term fusion is used to define a developmental anomaly characterised by the union of two adjacent teeth. In the case reported here, clinical and radiographic examinations suggested a unilateral fusion between the mandibular left permanent incisor and a super-numerary tooth. Radiographs showed that the fused teeth had two distinct pulp chambers and canals. A diagnosis of chronic periapical abscess of the supernumerary tooth was made. Before root canal therapy, a periodontal surgical procedure was performed to section the central incisor and its fused supernumerary. Also, odontoplasty was performed on the roots, to establish an anatomy consistent with a normal central incisor. Later, the chronic apical abscess on the supernumerary tooth was instrumented chemo-mechanically, root canal filling was performed and an anterior composite resin restoration was placed. The patient was evaluated for one year after root canal therapy. The tooth was asymptomatic, not exhibiting any pathological root resorption or alveolar resorption, and the anterior composite restoration was intact. Instead of extracting the supernumerary tooth, the application of endodontic, periodontal, and restorative procedures proved to be an alternative treatment.

Direct restorative treatment of anterior weared teeth after re-establishment of occlusal vertical dimension: a case report.

Science.gov (United States)

Humel, Maria M C; Takahashi, Jessica M F K; Paulillo, Luis A M S; Mesquita, Marcelo F; Martins, Luis R M

2012-12-01

The loss of posterior teeth resulting in a lack of stability may lead to excessive mandibular load on some points of occlusion of the remaining teeth, causing wear. The rehabilitation of these cases must be carefully planned and the treatment requires a period of adaptation with a new vertical dimension. This case report describes the treatment of a patient with a loss of almost all posterior inferior teeth and a consequential loss of occlusal vertical dimension and accentuated wear of anterior elements.   Provisional removable partial dentures were manufactured and the patient used them for a period of adaptation prior to restoration of the anterior teeth. After the patient's adaptation with the new occlusal dimension, anterior restorations were made using a mycrohibrid resin composite with different color aspects for an optimal stratification. The restorations achieved an aesthetic configuration with ideal function as the final result and the occlusion showed a satisfactory stability for a provisional removable partial dentures. This article presents an anterior direct rehabilitation approach not only as an alternative option, but also as viable and less expensive treatment option with an optimally aesthetic and functional result. © 2012 The Gerodontology Society and John Wiley & Sons A/S.

Bifid mandibular canal: a rare or underestimated entity?

Directory of Open Access Journals (Sweden)

Ibrahim Nasseh

2016-10-01

Full Text Available One of the rare anatomical variations that can be of significant importance for the dentist is the bifid mandibular canal. Many complications can occur from this condition such as failure of anesthesia when performing inferior alveolar nerve block, difficulties during the surgical extraction of the third mandibular molar, and during implants placement. Therefore, good knowledge of this condition is essential. In this report, we describe the radiographic finding of a unilateral bifid mandibular canal.

Cervical vertebral maturation method and mandibular growth peak: a longitudinal study of diagnostic reliability.

Science.gov (United States)

Perinetti, Giuseppe; Primozic, Jasmina; Sharma, Bhavna; Cioffi, Iacopo; Contardo, Luca

2018-03-28

The capability of the cervical vertebral maturation (CVM) method in the identification of the mandibular growth peak on an individual basis remains undetermined. The diagnostic reliability of the six-stage CVM method in the identification of the mandibular growth peak was thus investigated. From the files of the Oregon and Burlington Growth Studies (data obtained between early 1950s and middle 1970s), 50 subjects (26 females, 24 males) with at least seven annual lateral cephalograms taken from 9 to 16 years were identified. Cervical vertebral maturation was assessed according to the CVM code staging system, and mandibular growth was defined as annual increments in Co-Gn distance. A diagnostic reliability analysis was carried out to establish the capability of the circumpubertal CVM stages 2, 3, and 4 in the identification of the imminent mandibular growth peak. Variable durations of each of the CVM stages 2, 3, and 4 were seen. The overall diagnostic accuracy values for the CVM stages 2, 3, and 4 were 0.70, 0.76, and 0.77, respectively. These low values appeared to be due to false positive cases. Secular trends in conjunction with the use of a discrete staging system. In most of the Burlington Growth Study sample, the lateral head film at age 15 was missing. None of the CVM stages 2, 3, and 4 reached a satisfactorily diagnostic reliability in the identification of imminent mandibular growth peak.

Radiologic assessment of maxillofacial, mandibular, and skull base trauma

International Nuclear Information System (INIS)

Schuknecht, Bernhard; Graetz, Klaus

2005-01-01

Cranio-maxillofacial injuries affect a significant proportion of trauma patients either in isolation or concurring with other serious injuries. Contrary to maxillofacial injuries that result from a direct impact, central skull base and lateral skull base (petrous bone) fractures usually are caused by a lateral or sagittal directed force to the skull and therefore are indirect fractures. The traditional strong role of conventional images in patients with isolated trauma to the viscerocranium is decreasing. Spiral multislice CT is progressively replacing the panoramic radiograph, Waters view, and axial films for maxillofacial trauma, and is increasingly being performed in addition to conventional films to detail and classify trauma to the mandible as well. Imaging thus contributes to accurately categorizing mandibular fractures based on location, into alveolar, mandibular proper, and condylar fractures - the last are subdivided into intracapsular and extracapsular fractures. In the midface, CT facilitates attribution of trauma to the categories central, lateral, or combined centrolateral fractures. The last frequently encompass orbital trauma as well. CT is the imaging technique of choice to display the multiplicity of fragments, the degree of dislocation and rotation, or skull base involvement. Transsphenoid skull base fractures are classified into transverse and oblique types; lateral base (temporal bone) trauma is subdivided into longitudinal and transverse fractures. Supplementary MR examinations are required when a cranial nerve palsy occurs in order to recognize neural compression. Early and late complications of trauma related to the orbit, anterior cranial fossa, or lateral skull base due to infection, brain concussion, or herniation require CT to visualize the osseous prerequisites of complications, and MR to define the adjacent brain and soft tissue involvement. (orig.)

Mandibular incisor apicoectomy in a Canadian Beaver.

Science.gov (United States)

Steenkamp, Gerhard; Venter, Leon; Crossley, David; Buss, Peter

2009-01-01

A 52-month-old Canadian beaver was presented for treatment of lip trauma resulting from overgrowth of the right mandibular incisor tooth following earlier loss of the right maxillary incisor tooth. Extraction of the affected tooth was considered, but rejected due to the length of the embedded portion of rodent mandibular incisor teeth. The lip injury was managed by crown reduction (odontoplasty) of the overgrowing incisor tooth pending a more permanent treatment plan. A 2-cm apicoectomy of the right mandibular incisor tooth was performed to arrest growth of the tooth when the beaver was 82-months-old. The remainder of the tooth continued to erupt and was completely expelled during a 9-month period with one additional odontoplasty being required. The beaver continued to feed normally with just the left maxillary and mandibular incisor teeth until its death at 118-months, with odontoplasty performed twice on the remaining incisor teeth during the 30-months following exfoliation.

Impact of the lower third molar presence and position on the fragility of mandibular angle and condyle: A Three-dimensional finite element study.

Science.gov (United States)

Antic, Svetlana; Vukicevic, Arso M; Milasinovic, Marko; Saveljic, Igor; Jovicic, Gordana; Filipovic, Nenad; Rakocevic, Zoran; Djuric, Marija

2015-07-01

The aim of the present study was to investigate the influences of the presence and position of a lower third molar (M3) on the fragility of mandibular angle and condyle, using finite element analysis. From computed tomographic scans of a human mandible with normally erupted M3, two additional virtual models were generated: a mandibular model with partially impacted M3 and a model without M3. Two cases of impact were considered: a frontal and a lateral blow. The results are based on the chromatic analysis of the distributed von Mises and principal stresses, and calculation of their failure indices. In the frontal blow, the angle region showed the highest stress in the case with partially impacted M3, and the condylar region in the case without M3. Compressive stresses were dominant but caused no failure. Tensile stresses were recorded in the retromolar areas, but caused failure only in the case with partially impacted M3. In the lateral blow, the stress concentrated at the point of impact, in the ipsilateral and contralateral angle and condylar regions. The highest stresses were recorded in the case with partially impacted M3. Tensile stresses caused the failure on the ipsilateral side, whereas compressive stresses on the contralateral side. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Evaluation of mandibular morphology in different facial types

Directory of Open Access Journals (Sweden)

Rajat Mangla

2011-01-01

Full Text Available The purpose of this study was to evaluate mandibular morphology in different facial types using various parameters. This study was conducted on lateral cephalograms of a total of 110 subjects, which included 55 males and 55 females between the age of 18-25 years having a mean of 22.3 years for males and 21.5 years for females. The sample was divided into normodivergent, hypodivergent, and hyperdivergent subgroups based on Jarabak′s ratio. Symphysis height, depth, ratio (height/depth and angle, antegonial notch depth, ramal height and width, mandibular depth, upper, lower, and total gonial angle, and mandibular arc angle were analyzed statistically and graphically. It was found that the mandible with the vertical growth pattern was associated with a symphysis with large height, small depth, large ratio, small angle, decreased ramus height and width, smaller mandibular depth, increased gonial angle, and decreased mandibular arc angle in contrast to mandible with a horizontal growth pattern. Sexual dichotomy was found with mean symphysis height and depth in the female sample being smaller than in the male sample, but symphysis ratio was larger in the female sample; males having greater ramus height and width, mandibular depth than females. The mandible seemed to have retained its infantile characteristics with all its processes underdeveloped in hyperdivergent group.

Relationship between cervical vertebral maturation and mandibular growth.

Science.gov (United States)

Ball, Gina; Woodside, Donald; Tompson, Bryan; Hunter, W Stuart; Posluns, James

2011-05-01

The cervical vertebrae have been proposed as a method of determining biologic maturity. The purposes of this study were to establish a pattern of mandibular growth and to relate this pattern to the stages of cervical vertebral maturation. Cephalometric radiographs, taken annually from ages 9 to 18 years, were evaluated for 90 boys from the Burlington Growth Center, Toronto, Ontario, Canada. Mandibular lengths were measured from articulare to gnathion, and incremental growth was determined. Cervical vertebral maturation stages were assessed by using a 6-stage method. Advanced, average, and delayed maturation groups were established. The prepubertal mandibular growth minimum velocity occurred during cervical stages 1 through 4 (P = 0.7327). Peak mandibular growth velocity occurred most frequently during stage 4 in all 3 maturation groups, with a statistical difference in the average and delayed groups (P cervical stages 1 through 6 does not occur annually; time spent in each stage varies depending on the stage and the maturation group. Cervical vertebral maturation stages cannot accurately identify the mandibular prepubertal growth minimum and therefore cannot predict the onset of the peak in mandibular growth. The cervical vertebral maturation stages should be used with other methods of biologic maturity assessment when considering both dentofacial orthopedic treatment and orthognathic surgery. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Mandibular advancement appliance for obstructive sleep apnoea

DEFF Research Database (Denmark)

Petri, Niels; Svanholt, Palle; Solow, Beni

2008-01-01

The aim of this trial was to evaluate the efficacy of a mandibular advancement appliance (MAA) for obstructive sleep apnoea (OSA). Ninety-three patients with OSA and a mean apnoea-hypopnoea index (AHI) of 34.7 were centrally randomised into three, parallel groups: (a) MAA; (b) mandibular non...

Relationship of condylar position to disc position and morphology

Energy Technology Data Exchange (ETDEWEB)

Incesu, L.; Taskaya-Yilmaz, N. E-mail: nergizy@omu.edu.tr; Oeguetcen-Toller, M.; Uzun, E

2004-09-01

Introduction/objective: The purpose of this study was to assess whether condylar position, as depicted by magnetic resonance imaging, was an indicator of disc morphology and position. Methods and material: One hundred and twenty two TMJs of 61 patients with temporomandibular joint disorder were examined. Condylar position, disc deformity and degree of anterior disc displacement were evaluated by using magnetic resonance imaging. Results and discussion: Posterior condyle position was found to be the main feature of temporomandibular joints with slight and moderate anterior disc displacement. No statistical significance was found between the condylar position, and reducing and nonreducing disc positions. On the other hand, superior disc position was found to be statistically significant for centric condylar position. Conclusion: It was concluded that posterior condyle position could indicate anterior disc displacement whereas there was no relation between the position of condyle and the disc deformity.

Mandibular Condyle Fractures and Treatment Modalities

Directory of Open Access Journals (Sweden)

Halil ibrahim Kisa

2014-08-01

Full Text Available Maxillofacial injuries are most commonly associated with falls, motor and vehicle accidents, sports-related trauma, and interpersonel violence. The complexity of mandibular condyle region and its anatomic proximity to other craniofacial structures complicate diagnosis and treatment. Thus, treatment approaches of mandibular condyle fracture are still controversial. In the literature, different success rates are reported about observation versus treatment, closed reduction versus open reduction and fixation methods. In the present article, controversial issues related to mandibular condyle fractures were reviewed under the light of current literature. In conclusion, the simplest way that can be done with the least risk of complication should be chosen during treatment planning. In addition, current adjunctive treatment methods accelerating healing of fracture should be considered. [Archives Medical Review Journal 2014; 23(4.000: 658-671

A new technique for mandibular osteotomy

Directory of Open Access Journals (Sweden)

Puricelli Edela

2007-03-01

Full Text Available Abstract Sagittal split osteotomy (SSO is a surgical technique largely employed for mandibular mobilizations in orthognatic procedures. However, the traditional design of buccal osteotomy, located at the junction of mandibular ramus and body, may prevent more extensive sliding between the bone segments, particularly on the advance, laterality and verticality of the mandibular body. The author proposes a new technical and conceptual solution, in which osteotomy is performed in a more distal region, next to the mental formamen. Technically, the area of contact between medullary-cancellous bone surfaces is increased, resulting in larger sliding rates among bone segments; it also facilitates the use of rigid fixation systems, with miniplates and monocortical screws. Conceptually, it interferes with the resistance arm of the mandible, seen as an interpotent lever of the third gender.

The PAM-1 aminopeptidase regulates centrosome positioning to ensure anterior-posterior axis specification in one-cell C. elegans embryos.

Science.gov (United States)

Fortin, Samantha M; Marshall, Sara L; Jaeger, Eva C; Greene, Pauline E; Brady, Lauren K; Isaac, R Elwyn; Schrandt, Jennifer C; Brooks, Darren R; Lyczak, Rebecca

2010-08-15

In the one-cell Caenorhabditis elegans embryo, the anterior-posterior (A-P) axis is established when the sperm donated centrosome contacts the posterior cortex. While this contact appears to be essential for axis polarization, little is known about the mechanisms governing centrosome positioning during this process. pam-1 encodes a puromycin sensitive aminopeptidase that regulates centrosome positioning in the early embryo. Previously we showed that pam-1 mutants fail to polarize the A-P axis. Here we show that PAM-1 can be found in mature sperm and in cytoplasm throughout early embryogenesis where it concentrates around mitotic centrosomes and chromosomes. We provide further evidence that PAM-1 acts early in the polarization process by showing that PAR-1 and PAR-6 do not localize appropriately in pam-1 mutants. Additionally, we tested the hypothesis that PAM-1's role in polarity establishment is to ensure centrosome contact with the posterior cortex. We inactivated the microtubule motor dynein, DHC-1, in pam-1 mutants, in an attempt to prevent centrosome movement from the cortex and restore anterior-posterior polarity. When this was done, the aberrant centrosome movements of pam-1 mutants were not observed and anterior-posterior polarity was properly established, with proper localization of cortical and cytoplasmic determinants. We conclude that PAM-1's role in axis polarization is to prevent premature movement of the centrosome from the posterior cortex, ensuring proper axis establishment in the embryo. Copyright 2010 Elsevier Inc. All rights reserved.

Exploration of variations in positions of upper and lower incisors, overjet, overbite, and irregularity index in orthodontic patients with dissimilar depths of curve of spee

International Nuclear Information System (INIS)

Kumari, N.; Fida, M.; Shaikh, A.

2017-01-01

The position and arrangement of teeth as well as the entire scheme of occlusion differs from one individual to the other .The purpose of this study was to examine differences in position and inclination of incisors, overjet, overbite and lower arch crowding in subjects with different depths of curve of Spee and to determine correlations between depth of curve of Spee and these variables. Methods: The sample comprised of 114 patients (55 females and 59 males) with fully erupted permanent second molars (age 12-25 years), having no history of previous orthodontic treatment, no craniofacial anomalies, and no missing permanent teeth. Study parameters were assessed by using pretreatment lateral cephalograms and dental casts of orthodontic patients. The entire sample was divided into three groups according to depth of curve of Spee (mild Spee=38, moderate Spee=38, severe Spee=38). Descriptive statistics were calculated. Differences between the Spee groups were assessed by analysis of variance. In addition, correlation coefficients were calculated between curve of Spee and other parameters. Results: Statistically significant differences were found in upper incisor inclination (p=0.000), lower incisor inclination (p=0.003), Steiner's mandibular plane angle (p=0.000), overjet (p=0.001), overbite (p=0.000) and irregularity index (p=0.008) among the Spee groups. Moreover, statistically significant positive correlations were found between curve of Spee and overjet, overbite and irregularity index. Upper and lower incisor inclinations as well as mandibular plane angle were found to have statistically significant but negative correlations with curve of Spee. Conclusion: Overjet and overbite in severe Spee group are larger than in mild and moderate Spee groups. There is negative correlation between curve of Spee depth and inclinations of upper and lower incisors. There is positive correlation between curve of Spee depth and severity of lower anterior crowding and Steiner

Maxillary-driven simultaneous maxillo-mandibular distraction for hemifacial microsomia.

Science.gov (United States)

Nakajima, Hideo; Sakamoto, Yoshiaki; Tamada, Ikkei; Ogata, Hisao; Kishi, Kazuo; Sakamoto, Teruo

2011-12-01

We treat hemifacial microsomia with a combination of surgery and orthodontic treatment during the growth period, resulting in early improvement in facial asymmetry and the induction of normal growth. We previously used gradual distraction of the mandibular ramus for Pruzansky's type II classification (Pruzansky, 1969). In type II cases, the maxilla should also be treated actively as, using this technique, improvement of the occlusal plane is difficult to achieve, resulting in a cross bite and difficulties in post-operative orthodontic treatment-especially in older patients. Morphologically, the mandibular angle region of the operative side is flat, and the angle of the mouth remains elevated. We performed mandibular-driven simultaneous maxillo-mandibular distraction while the occlusion was maintained using intermaxillary anchorage. However, mandibular-driven distraction tended to elongate the face because the mandible only elongated downwards and the mandibular ramus did not reach the glenoid. Furthermore, external distraction devices produce significant distress for patients until removal of the device and cause scars on the face. We developed a new internal distraction device with a variable angle and performed maxillary-driven simultaneous maxillo-mandibular distraction using this device. The result was morphologically satisfactory and solved the above problems. Because the patient was in the growth period, careful follow-up and induction to normal growth were important while the inferior growth of the affected side was monitored. Copyright © 2010 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Effect of joining the sectioned implant-supported prosthesis on the peri-implant strain generated in simulated mandibular model

OpenAIRE

Ipsha Singh; K Chandrasekharan Nair; Jayakar Shetty

2017-01-01

Aim: The aim of this study is to evaluate the strain developed in simulated mandibular model before and after the joining of an implant-supported screw-retained prosthesis by different joining techniques, namely, arc welding, laser welding, and soldering. Materials and Methods: A specimen simulating a mandibular edentulous ridge was fabricated in heat-cured acrylic resin. 4-mm holes were drilled in the following tooth positions; 36, 33, 43, 46. Implant analogs were placed in the holes. Un...

Local administration of calcitriol positively influences bone remodeling and maturation during restoration of mandibular bone defects in rats

International Nuclear Information System (INIS)

Liu, Hongrui; Cui, Jian; Feng, Wei; Lv, Shengyu; Du, Juan; Sun, Jing; Han, Xiuchun; Wang, Zhenming; Lu, Xiong; Yimin; Oda, Kimimitsu; Amizuka, Norio; Li, Minqi

2015-01-01

The aim of this study was to investigate the influence of calcitriol on osteoinduction following local administration into mandibular bone defects. Calcitriol-loaded absorbable collagen membrane scaffolds were prepared using the polydopamine coating method and characterized by scanning electron microscopy. Composite scaffolds were implanted into rat mandibular bone defects in the following groups: no graft material (control), bare collagen membrane (CM group), collagen membrane bearing polydopamine coating (DOP/CM group), and collagen membrane bearing polydopamine coating absorbed with calcitriol (CAL/DOP/CM group). At 1, 2, 4 and 8 weeks post-surgery, the osteogenic potential of calcitriol was examined by histological and immunohistochemical methods. Following in vivo implantation, calcitriol-loaded composite scaffolds underwent rapid degradation with pronounced replacement by new bone and induced reunion of the bone marrow cavity. Calcitriol showed strong potential in inhibiting osteoclastogenesis and promotion of osteogenic differentiation at weeks 1, and 2. Furthermore, statistical analysis revealed that the newly formed bone volume in the CAL/DOP/CM group was significantly higher than other groups at weeks 1, and 2. At weeks 4, and 8, the CAL/DOP/CM group showed more mineralized bone and uniform collagen structure. These data suggest that local administration of calcitriol is promising in promoting osteogenesis and mineralization for restoration of mandibular bone defects. - Highlights: • More information on collagen material was added in the revised manuscript. • Masson–Goldner trichrome stain was performed for histomorphometry. • More specific information on calcitriol was supplemented in the Discussion section. • The MOD of ALP and Runx2 was explained in more detail. • The inhibition of osteoclastogenesis was described more accurately in the second paragraph of the discussion

Local administration of calcitriol positively influences bone remodeling and maturation during restoration of mandibular bone defects in rats

Energy Technology Data Exchange (ETDEWEB)

Liu, Hongrui; Cui, Jian; Feng, Wei; Lv, Shengyu; Du, Juan; Sun, Jing; Han, Xiuchun [Department of Bone Metabolism, School of Stomatology Shandong University, Shandong Provincial Key Laboratory of Oral Biomedicine, Jinan (China); Wang, Zhenming; Lu, Xiong [Key Lab of Advanced Technologies of Materials, Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, Sichuan (China); Yimin [Department of Advanced Medicine, Graduate School of Medicine, Hokkaido University, Sapporo (Japan); Oda, Kimimitsu [Division of Biochemistry, Niigata University Graduate School of Medical and Dental Sciences, Niigata (Japan); Amizuka, Norio [Department of Developmental Biology of Hard Tissue, Graduate School of Dental Medicine, Hokkaido University, Sapporo (Japan); Li, Minqi, E-mail: liminqi@sdu.edu.cn [Department of Bone Metabolism, School of Stomatology Shandong University, Shandong Provincial Key Laboratory of Oral Biomedicine, Jinan (China)

2015-04-01

The aim of this study was to investigate the influence of calcitriol on osteoinduction following local administration into mandibular bone defects. Calcitriol-loaded absorbable collagen membrane scaffolds were prepared using the polydopamine coating method and characterized by scanning electron microscopy. Composite scaffolds were implanted into rat mandibular bone defects in the following groups: no graft material (control), bare collagen membrane (CM group), collagen membrane bearing polydopamine coating (DOP/CM group), and collagen membrane bearing polydopamine coating absorbed with calcitriol (CAL/DOP/CM group). At 1, 2, 4 and 8 weeks post-surgery, the osteogenic potential of calcitriol was examined by histological and immunohistochemical methods. Following in vivo implantation, calcitriol-loaded composite scaffolds underwent rapid degradation with pronounced replacement by new bone and induced reunion of the bone marrow cavity. Calcitriol showed strong potential in inhibiting osteoclastogenesis and promotion of osteogenic differentiation at weeks 1, and 2. Furthermore, statistical analysis revealed that the newly formed bone volume in the CAL/DOP/CM group was significantly higher than other groups at weeks 1, and 2. At weeks 4, and 8, the CAL/DOP/CM group showed more mineralized bone and uniform collagen structure. These data suggest that local administration of calcitriol is promising in promoting osteogenesis and mineralization for restoration of mandibular bone defects. - Highlights: • More information on collagen material was added in the revised manuscript. • Masson–Goldner trichrome stain was performed for histomorphometry. • More specific information on calcitriol was supplemented in the Discussion section. • The MOD of ALP and Runx2 was explained in more detail. • The inhibition of osteoclastogenesis was described more accurately in the second paragraph of the discussion.

Osteochondroma involving mandibular condyle

Directory of Open Access Journals (Sweden)

Latika Bachani

2017-01-01

Full Text Available Osteochondroma is defined as an osteocartilagenous exostosis with cartilage capped exophytic lesion that arises from the bone cortex. It is a slow growing benign tumor that is rarely seen in the maxillofacial region. Osteochondroma of the mandibular condyle is a relatively rare condition that causes a progressive enlargement of the condyle, usually resulting in facial asymmetry, temporomandibular joint (TMJ dysfunction and malocclusion. Radiographically, there is a unilaterally enlarged condyle usually with an exophytic growth of the tumor from the condylar head. The treatment of osteochondroma is primarily surgical resection of the tumor. This paper reports a case of osteochondroma of the right mandibular condyle presenting as a painless restricted mouth opening.

Orthodontic treatment of an anterior openbite with the aid of corticotomy procedure: Case report.

Science.gov (United States)

Aljhani, Ali S; Aldrees, Abdullah M

2011-04-01

This case report illustrates the orthodontic treatment combined with the corticotomy technique in an adult patient to accelerate tooth movement and shorten the treatment time. The patient was a 22-year-old woman with an anterior open bite and flared and spaced upper and lower incisors. First, fixed orthodontic appliances (bidimensional edgewise brackets) were bonded, and a week later buccal and lingual corticotomy with alveolar augmentation procedure in the maxillary arch from the first molar to the contralateral first molar, and from canine to canine in the mandibular arch was performed. Orthodontic therapy proceeded with frequent activation of the appliances to retract the incisors every 2 weeks. The total treatment time was 5 months and no adverse effects were observed at the end of active treatment. The addition of the decortication procedure to the conventional orthodontic therapy decreased the duration of treatment significantly. Successful closure of the anterior open bite with adequate overbite and interdigitation of the teeth were achieved.

Mandibular kinematics after orthognathic surgical treatment a pilot study.

Science.gov (United States)

Sforza, Chiarella; Ugolini, Alessandro; Rocchetta, Davide; Galante, Domenico; Mapelli, Andrea; Giannì, Aldo Bruno

2010-03-01

We recorded three-dimensional mandibular movements, while the mouth was being opened and closed, using an optoelectronic motion analyser in 14 patients (5 skeletal Class II, 9 skeletal Class III) who were being assessed 7-49 months after orthognathic operations, and in 44 healthy subjects. All 14 patients had satisfactory healing on clinical examination, and function had been restored. Mandibular movement was divided into its rotational and translational components. On maximum mouth opening, the patients had significantly less total displacement of the mandibular interincisor point (p=0.05), and more mandibular movement that was explained by pure condylar rotation (p=0.006), than control subjects. There was no significant relation between maximum mouth opening and percentage rotation. While mandibular motion was well restored clinically by orthognathic surgery, the kinematics of the joint were modified. Larger studies and longitudinal investigations are necessary to appreciate the clinical relevance of the variations in condylar rotational and translational components.

Fixation of zygomatic and mandibular fractures with biodegradable plates

OpenAIRE

Degala, Saikrishna; Shetty, Sujeeth; Ramya, S

2013-01-01

Context: In this prospective study, 13 randomly selected patients underwent treatment for zygomatic?complex fractures (2 site fractures) and mandibular fractures using 1.5 / 2 / 2.5-mm INION CPS biodegradable plates and screws. Aims: To assess the fixation of zygomatic-complex and mandibular fractures with biodegradable copolymer osteosynthesis system. Materials and Methods: In randomly selected 13 patients, zygomatic-complex and mandibular fractures were plated using resorbable plates and sc...

Accuracy of combined maxillary and mandibular repositioning and of soft tissue prediction in relation to maxillary antero-superior repositioning combined with mandibular set back A computerized cephalometric evaluation of the immediate postsurgical outcome using the TIOPS planning system

DEFF Research Database (Denmark)

Donatsky, Ole; Bjørn-Jørgensen, Jens; Hermund, Niels Ulrich

2009-01-01

surgical planning system (TIOPS). MATERIAL AND METHODS: Out of 100 prospectively and consecutively treated patients, 52 patients manifested dentofacial deformities requiring bimaxillary orthognathic surgery with maxillary antero-superior repositioning combined with mandibular set back and so were included......AIM: The purpose of the present study was to evaluate the immediate postsurgical outcome of planned and predicted hard and soft tissue positional changes in relation to maxillary antero-superior repositioning combined with mandibular set back using the computerized, cephalometric, orthognathic...... positional changes were transferred to model surgery on a three-dimensional articulator system (SAM) and finally to surgery. Five to six weeks after surgery, the actually obtained hard and soft tissue profile changes were cephalometricly assessed. RESULTS: The mean accuracy of the planned and predicted hard...

Aesthetic Closure of Maxillary and Mandibular Anterior Spaces Using Direct Composite Resin Build-Ups: A Case Report

Directory of Open Access Journals (Sweden)

Schick Simona-Georgiana

2016-07-01

Full Text Available The presence of multiple spaces in the anterior aesthetic zone can produce discomfort for patients and its treatment can be difficult for dental professionals. A variety of treatment options are available and these include orthodontic movement, prosthetic indirect restorations or direct composite resin build-ups. Among these, the closure of interdental spaces using composite build-ups combined with orthodontic treatment is considered to be most conservative. This type of treatment has several advantages like the maximum preservation of tooth substance (no tooth preparation, no need for anesthesia, no multiple time-consuming visits, no provisional restorations and also comparably low costs. Clinical Consideration: This case report describes the clinical restorative procedure of direct composite resin build-ups for the closure of multiple anterior spaces.

Chincup treatment modifies the mandibular shape in children with prognathism.

Science.gov (United States)

Alarcón, José Antonio; Bastir, Markus; Rosas, Antonio; Molero, Julia

2011-07-01

Although chincups are the preferred treatment for growing children with mandibular prognathism, the mechanism by which chincups improve this condition remains unclear. The aim of this study was to use geometric morphometrics to evaluate changes in the shape of the mandible of prognathic children treated with a chincup. Geometric morphometrics were used to evaluate the short-term mandibular shape changes in 50 prognathic children treated with chincups compared with 40 untreated matched controls. Twenty-one 2-dimensional mandibular landmarks from cephalograms taken before and after 36 months of treatment or observation were analyzed by Procrustes superimposition and thin plate spline. Permutation tests of the treated patients showed highly significant differences in the mandibular shapes before and after treatment, and compared with the control group after the observation period. The thin plate spline grid deformations indicated more rectangular mandibular configuration, forward condyle orientation, condyle neck compression, gonial area compression, and symphysis narrowing. Early chincup treatment widely modifies the mandibular shape of prognathic children to improve Class III malocclusion. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Augmented mandibular bone structurally adapts to functional loading

NARCIS (Netherlands)

Verhoeven, J. W.; Ruijter, J. M.; Koole, R.; de Putter, C.; Terlou, M.; Cune, M. S.

2013-01-01

Long-term changes in trabecular bone structure during the 10 years following onlay grafting with simultaneous mandibular implant placement were studied. Extraoral radiographs of both mandibular sides in eight patients were taken regularly. Bone structure was analysed using a custom-written image

Diagnostic ability of panoramic radiography for mandibular fractures

International Nuclear Information System (INIS)

Lee, Ji Hyun; Jung, Yun Hoa; Cho Bong Hae; Hwang, Dae Seok

2010-01-01

The purpose of this study was to evaluate the diagnostic efficacy of panoramic radiographs for detection of mandibular fractures. The sample was comprised of 65 patients (55 fractured, 10 non-fractured) with 92 fracture sites confirmed by multi-detector computed tomography (CT). Panoramic radiographs were evaluated for mandibular fractures by six examiners; two oral and maxillofacial radiologists (observer A and B), two oral and maxillofacial surgeons (observer C and D), and two general dentists (observer E and F). Sensitivity of panoramic radiography for mandibular fractures was 95.7% in observer A and B, 93.5% in observer C and D and 80.4% in observer E and F. The lowest sensitivity was shown in symphyseal/parasymphyseal areas, followed by subcondylar/condylar regions. Panoramic radiography is adequate for detection of mandibular fractures. However, additional multidetector CT is recommended to ascertain some indecisive fractures of symphysis and condyle, and in complicated fractures.

Diagnostic ability of panoramic radiography for mandibular fractures

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Hyun; Jung, Yun Hoa; Cho Bong Hae; Hwang, Dae Seok [School of Dentistry, Pusan National University, Pusan (Korea, Republic of)

2010-03-15

The purpose of this study was to evaluate the diagnostic efficacy of panoramic radiographs for detection of mandibular fractures. The sample was comprised of 65 patients (55 fractured, 10 non-fractured) with 92 fracture sites confirmed by multi-detector computed tomography (CT). Panoramic radiographs were evaluated for mandibular fractures by six examiners; two oral and maxillofacial radiologists (observer A and B), two oral and maxillofacial surgeons (observer C and D), and two general dentists (observer E and F). Sensitivity of panoramic radiography for mandibular fractures was 95.7% in observer A and B, 93.5% in observer C and D and 80.4% in observer E and F. The lowest sensitivity was shown in symphyseal/parasymphyseal areas, followed by subcondylar/condylar regions. Panoramic radiography is adequate for detection of mandibular fractures. However, additional multidetector CT is recommended to ascertain some indecisive fractures of symphysis and condyle, and in complicated fractures.

Autotransplantation of Mandibular Third Molar: A Case Report

Directory of Open Access Journals (Sweden)

Pabbati Ravi kumar

2012-01-01

Full Text Available Autogenous transplantation is a feasible, fast, and economical option for the treatment of nonsalvageable teeth when a suitable donor tooth is available. This paper presents successful autotransplantation of a mature mandibular left third molar (38 without anatomical variances is used to replace a mandibular left second molar (37. The mandibular second molar was nonrestorable due to extensive root caries and resorption of distal root. After extraction of mandibular second and third molars, root canal therapy was done for the third molar extraorally, and the tooth was reimplanted into the extracted socket of second molar site. After one year, clinical and radiographic examination revealed satisfactory outcome with no signs or symptoms suggestive of pathology. In selected cases, autogenous tooth transplantation, even after complete root formation of the donor tooth, may be considered as a practical treatment alternative to conventional prosthetic rehabilitation or implant treatment.

Tooth axis and skeletal structures in mandibular molar vertical sections in jaw deformity with facial asymmetry using MPR images

International Nuclear Information System (INIS)

Nojima, Kunihiko; Yokose, Taishi; Ishii, Takenobu; Kobayashi, Makoto; Nishii, Yasushi

2007-01-01

The objective of the present study was to investigate frontal morphological asymmetry in the mandibular molar region in terms of tooth axis and skeletal structures using vertical MPR sections in jaw deformity accompanied by facial asymmetry. Subjects consisted of 15 patients with jaw deformity accompanied by facial asymmetry aged 17.4 years to 37.8 years. There were four men and eleven women. Based on X-ray computed tomography (CT) scans, Digital Imaging and Communications in Medicine (DICOM) viewer software was used to prepare multiplanar reconstruction (MPR) sections. The mandible was then positioned on a reference plane based on the menton and left and right gonions, and a vertical MPR section passing through the mesial root of the first mandibular molar was prepared. The following measurements were made on both the shifted and non-shifted sides: maximum buccolingual width of the mandibular body; height of the mandibular body; inclination angle of the mandibular body; degree of buccal protrusion of the mandibular body; and inclination angle of the buccolingual tooth axis of the first molar. Furthermore, degree of median deviation in the menton was measured using frontal cephalograms. Differences in morphological parameters between the shifted and non-shifted sides were assessed. Furthermore, the relationship between median deviation and asymmetry were statistically analyzed. There was no significant asymmetry in the maximum buccolingual width of the mandibular body, the height of the mandibular body or the degree of buccal protrusion of the mandibular body. However, when compared to the shifted side, the inclination angle of the buccolingual tooth axis of the first molar for the non-shifted side was significantly greater. There was a relatively strong correlation between median deviation and inclination angle of the mandibular body. The above findings clarified that, in orthognathic surgery for jaw deformity accompanied by facial asymmetry, actively improving

Eosinophilic granuloma of the mandibular condyle

International Nuclear Information System (INIS)

Huh, Kyung Hoe; Yi, Won Jin; Oh, Sung Won; Lee, Sam Sun; Choi, Mun Kyung

2008-01-01

The present study reports a case of eosinophilic granuloma of the mandibular condyle. Eosinophilic granulomas on the mandibular condyle are very rare, but there are several common clinical and radiographic presentations. The clinical presentations involve swelling on preauricular area, limitation of opening, TMJ pain, etc. The radiographic presentations involve radiolucent lytic condylar lesion with or without pathologic fracture. Sometimes new bone formations are observed. The purpose of the article is to add new cases to the literatures.

Eosinophilic granuloma of the mandibular condyle

Energy Technology Data Exchange (ETDEWEB)

Huh, Kyung Hoe; Yi, Won Jin; Oh, Sung Won; Lee, Sam Sun [Department of Oral and Maxillofacial Radiology, and Dental Research Institute, School of Dentistry, Seoul National University, Seoul (Korea, Republic of); Choi, Mun Kyung [Department of Oral and Maxillofacial Surgery, College of Medicine, Inje University Sanggye Paik Hospital, Seoul (Korea, Republic of)

2008-03-15

The present study reports a case of eosinophilic granuloma of the mandibular condyle. Eosinophilic granulomas on the mandibular condyle are very rare, but there are several common clinical and radiographic presentations. The clinical presentations involve swelling on preauricular area, limitation of opening, TMJ pain, etc. The radiographic presentations involve radiolucent lytic condylar lesion with or without pathologic fracture. Sometimes new bone formations are observed. The purpose of the article is to add new cases to the literatures.

Mandibular fracture cases in Pelotas, Rio Grande do Sul, Brazil

Directory of Open Access Journals (Sweden)

Rafael Silva da Silva

2009-10-01

Full Text Available Objectives: To analyze the data in the literature, which show a high incidence of mandibular fractures. The aim of this research was to elucidate the context in which these fractures occur among patients attended at the first aid center of “Pronto Socorro Municipal de Pelotas”, Rio Grande do Sul, Brazil. Methods: From the records referring to the period of June, 2001 to August, 2007, there were 1 345 patients with facial fractures. Of this total, 116 patients with mandibular fracture were selected for this study and the items analysed were: age, gender, mandibular fracture site, etiology and period of the year. Results: It was found that 86.2% of the sample were men. The most prevalent age was 20 to 29 years old representing 36.2%, and the most affected mandibular sites were the body, with 29 cases (25%, and the condyle, with 26 cases (22.4%. The most common cause of fractures was the physical aggression representing 37.1%. The period of the year with the highest incidence of mandibular fractures was the summer, with 38 cases (32.8%. Conclusion: It was therefore observed that the patients with mandibular fracture assisted at Pronto-Socorro Municipal de Pelotas, Rio Grande do Sul, Brazil, were generally men, 20 to 29 years old with mandibular body fracture and they were victims of physical aggression.

Early Loaded Single Implant Reinforced Mandibular Overdenture

Directory of Open Access Journals (Sweden)

K. Nischal

2016-01-01

Full Text Available Rehabilitating atrophied mandible with two-implant supported denture is a common treatment modality for implant retained removable overdenture in mandible. This paper aims to design a treatment modality where single implant reinforced overdenture is fabricated for a severely atrophied mandibular ridge with early loading protocol. Results of studies have shown that a single implant mandibular overdenture significantly increases the satisfaction and quality of life of patients with edentulism. Midline fracture of the prosthesis is the most common complication related to single implant and two-implant retained mandibular overdentures. To manage such complication, a thin metal mesh is used to reinforce the overdenture and also to make the prostheses lighter and cost effective as compared to conventional cast metal framework.

Intraoperative monitoring of marginal mandibular nerve during neck dissection.

Science.gov (United States)

Tirelli, Giancarlo; Bergamini, Pier Riccardo; Scardoni, Alessandro; Gatto, Annalisa; Boscolo Nata, Francesca; Marcuzzo, Alberto Vito

2018-05-01

The purpose of this study was to assess the efficacy of intraoperative nerve integrity monitoring (NIM) to prevent marginal mandibular nerve injuries during neck dissection. This prospective study compared 36 patients undergoing NIM-assisted neck dissection from July 2014 to March 2015 to a cohort of 35 patients subjected to neck dissection over an identical period of time before the technique was introduced. We also assessed possible correlations between marginal mandibular nerve injuries and other factors, such as anthropometric measurements, presence of clinical neck metastases, type of neck dissection, and site of primary tumor. The incidence of marginal mandibular nerve paralyses was significantly lower among the group of patients undergoing NIM-assisted neck dissection (P = .021). There was no significant difference in the duration of the procedure, and the technique resulted in a limited increase of cost. No other factor seemed to influence the onset of marginal mandibular nerve palsy. In our opinion, NIM is a valuable aid for preventing marginal mandibular nerve injuries during neck dissection. © 2018 Wiley Periodicals, Inc.

21 CFR 874.3695 - Mandibular implant facial prosthesis.

Science.gov (United States)

2010-04-01

... made of materials such as stainless steel, tantalum, titanium, cobalt-chromium based alloy... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mandibular implant facial prosthesis. 874.3695... (CONTINUED) MEDICAL DEVICES EAR, NOSE, AND THROAT DEVICES Prosthetic Devices § 874.3695 Mandibular implant...

Estimation of Absorbed Dose in Occlusal Radiography

International Nuclear Information System (INIS)

Yoo, Young Ah; Choi, Karp Shick; Lee, Sang Han

1990-01-01

The purpose of this study was to estimate absorbed dose of each important anatomic site of phantom (RT-210 Head and Neck Section R, Humanoid Systems Co., U.S.A.) head in occlusal radiography. X-radiation dosimetry at 12 anatomic sites in maxillary anterior topography, maxillary posterior topography, mandibular anterior cross-section, mandibular posterior cross-section, mandibular anterior topographic, mandibular posterior topographic occlusal projection was performed with calcium sulfate thermoluminescent dosimeters under 70 Kvp and 15 mA, 1/4 second (8 inch cone ) and 1 second (16 inch cone) exposure time. The results obtained were as follows: Skin surface produced highest absorbed dose ranged between 3264 mrad and 4073 mrad but there was little difference between projections. In maxillary anterior topographic occlusal radiography, eyeballs, maxillary sinuses, and pituitary gland sites produced higher absorbed doses than those of other sites. In maxillary posterior topographic occlusal radiography, exposed eyeball site and exposed maxillary sinus site produced high absorbed doses. In mandibular anterior cross-sectional occlusal radiography, all sites were produced relatively low absorbed dose except eyeball sites. In Mandibular posterior cross-sectional occlusal radiography, exposed eyeball site and exposed maxillary sinus site were produced relatively higher absorbed doses than other sites. In mandibular anterior topographic occlusal radiography, maxillary sinuses, submandibular glands, and thyroid gland sites produced high absorbed doses than other sites. In mandibular posterior topographic occlusal radiography, submandibular gland site of the exposed side produced high absorbed dose than other sites and eyeball site of the opposite side produced relatively high absorbed dose.

Penetration of flomoxef into human maxillary and mandibular bones.

Science.gov (United States)

Igawa, H H; Sugihara, T; Yoshida, T; Kawashima, K; Ohura, T

1995-09-01

Penetration of flomoxef into the maxillary and mandibular bones was assayed clinically to provide data about its usefulness for the prevention of postoperative infection after maxillofacial surgery. Twenty-one patients undergoing maxillofacial surgery at our department were given flomoxef 2 g dissolved in 20 ml of physiological saline intravenously over 3 minutes during operation, and the serum, maxillary and mandibular concentrations were measured 1, 3, and 6 hours after injection by the band culture method using Escherichia coli 7437 as the indicator strain. The mean concentrations were 53.4, 16.1, and 2.6 micrograms/ml, respectively, in the serum, 17.6, 7.8, and 1.0 micrograms/g in maxillary bone, and 16.4, 4.2, and 0.9 micrograms/g in mandibular bone. The mean bone:serum ratios at 1, 3, and 6 hours were 33.0%, 48.2%, and 36.8%, respectively, for maxillary bone, and 30.7%, 26.2%, and 35.7% for mandibular bone. When compared with previously reported data on the bone:serum ratios in jaw of various other intravenous antibiotics, our results show that penetration of flomoxef into maxillary and mandibular bone is extremely high. As all the intramaxillary and intramandibular concentrations exceed its MIC80 values against clinical isolates of bacteria frequently isolated in cases of infection in the oral and maxillofacial region, it is apparent that one intravenous shot of flomoxef 2 g allows penetration of the drug into the maxillary and mandibular bones at effective concentrations. Flomoxef is therefore potentially useful for the prevention and treatment of infections in the oral and maxillofacial region, as it has excellent penetration into the maxillary and mandibular bones.

A Clinical Comparison of Three Techniques of Mandibular Local Anaesthesia

Directory of Open Access Journals (Sweden)

Sthitaprajna Lenka

2014-01-01

Conclusions: After using Gow-Gates method, it was found that the Gow-Gates technique is a highly successful alternative to the conventional inferior nerve block with regards to increased success rate, constancy of landmarks, decreased positive aspiration rate, decreased incidence of complications such as trismus, the advantage of one injection to anaesthetize a greater area supplied by the mandibular nerve, longer duration of anaesthesia and less amount of pain experienced during injection.

Intermaxillary Fixation Screw Morbidity in Treatment of Mandibular Fractures

DEFF Research Database (Denmark)

Florescu, Vlad-Andrei; Kofod, Thomas; Pinholt, Else Marie

2016-01-01

Purpose The aim of the present retrospective study was to investigate the morbidity of screws used for intermaxillary fixation (IMF) in the treatment of mandibular fractures. A review of the published data was also performed for a comparison of outcomes. Our hypothesis was that the use of screws...... for IMF of mandibular fractures would result in minimal morbidity. Materials and Methods Patients treated for mandibular fractures from 2007 to 2013, using screws for IMF, using the international diagnosis code for mandibular fracture, DS026, were anonymously selected (Department of Oral and Maxillofacial...... Surgery, Rigshospitalet, University Hospital of Copenhagen, Copenhagen, Denmark). The fracture type, radiographic findings, treatment modality, screw type and number, and root damage were recorded. For the outcome comparison, a review of the published data regarding iatrogenic dental root damage caused...

[A toddler with a mandibular fracture].

Science.gov (United States)

van der Linden, E L; Bun, R J; van Os, E

2017-01-01

Mandibular fractures are rare in children. Symptoms of these fractures include preauricular pain and swelling, trismus and pain when opening the mouth, and they are often preceded by a fall on the chin. If the diagnosis is missed they may have serious consequences for the growth and development of the jaw. A 3-year-old boy was referred with a swelling in his left cheek, fever and vomiting. Two days earlier he had fallen on his chin. At physical examination he had severe preauricular pain on palpation and a trismus. The patient was admitted because of suspicion of a viral parotitis and the threat of dehydration. After discharge, he went to the dentist for examination of a molar that was painful to the touch. The dentist performed an orthopantomogram and discovered a fracture of the left mandibular collum. Any child with trauma to the chin should be observed for symptoms of a mandibular fracture, and if it seems necessary non-invasive radiographic examination should be performed.

Trigeminocardiac reflex by mandibular extension on rat pial microcirculation: role of nitric oxide.

Directory of Open Access Journals (Sweden)

Dominga Lapi

Full Text Available In the present study we have extended our previous findings about the effects of 10 minutes of passive mandibular extension in anesthetized Wistar rats. By prolonging the observation time to 3 hours, we showed that 10 minutes mandibular extension caused a significant reduction of the mean arterial blood pressure and heart rate respect to baseline values, which persisted up to 160 minutes after mandibular extension. These effects were accompanied by a characteristic biphasic response of pial arterioles: during mandibular extension, pial arterioles constricted and after mandibular extension dilated for the whole observation period. Interestingly, the administration of the opioid receptor antagonist naloxone abolished the vasoconstriction observed during mandibular extension, while the administration of Nω-Nitro-L-arginine methyl ester, a nitric oxide synthase inhibitor, abolished the vasodilation observed after mandibular extension. Either drug did not affect the reduction of mean arterial blood pressure and heart rate induced by mandibular extension. By qRT-PCR, we also showed that neuronal nitric oxide synthase gene expression was significantly increased compared with baseline conditions during and after mandibular extension and endothelial nitric oxide synthase gene expression markedly increased at 2 hours after mandibular extension. Finally, western blotting detected a significant increase in neuronal and endothelial nitric oxide synthase protein expression. In conclusion mandibular extension caused complex effects on pial microcirculation involving opioid receptor activation and nitric oxide release by both neurons and endothelial vascular cells at different times.

Coronal views of the paediatric mandibular condyle on ...

African Journals Online (AJOL)

This article highlights the importance of routinely reviewing the mandibular condyle on computerised tomography brain studies in a trauma setting, that often extends to involve the mandibular condyles in the scan parameters. We discuss 4 cases seen over the last 18 months at our institution, and review the relevant ...

Osteochondroma of the mandibular condyle

Directory of Open Access Journals (Sweden)

Ashish Kumar

2011-01-01

Full Text Available Osteochondroma (OC of the mandibular condyle is a relatively rare condition that causes a progressive enlargement of the condyle, usually resulting in facial asymmetry, temporomandibular joint (TMJ dysfunction, and malocclusion. Radiographically, there is a unilaterally enlarged condyle usually with an exophytic outgrowth of the tumor from the condylar head. We present a case of a left mandibular condylar OC that created a major facial asymmetry, malocclusion, and TMJ dysfunction. Discussion includes the rationale for treatment and the method used in this case. In actively growing OCs, surgical intervention is indicated to remove the tumor stopping the benign growth process and improve facial symmetry, occlusion, and jaw function.

The correlation between mineralization degree and bone tissue stiffness in the porcine mandibular condyle

NARCIS (Netherlands)

Willems, N.M.B.K.; Mulder, L.; Toonder, den J.M.J.; Zentner, A.; Langenbach, G.E.J.

2014-01-01

The aim of this study was to correlate the local tissue mineral density (TMD) with the bone tissue stiffness. It was hypothesized that these variables are positively correlated. Cancellous and cortical bone samples were derived from ten mandibular condyles taken from 5 young and 5 adult female pigs.

Orthodontic Extraction of High-Risk Impacted Mandibular Third Molars in Close Proximity to the Mandibular Canal: A Systematic Review.

Science.gov (United States)

Kalantar Motamedi, Mahmood Reza; Heidarpour, Majid; Siadat, Sara; Kalantar Motamedi, Alimohammad; Bahreman, Ali Akbar

2015-09-01

Extraction of mandibular third molars (M3s) in close proximity to the mandibular canal has some inherent risks to adjacent structures, such as neurologic damage to teeth, bone defects distal to the mandibular second molar (M2), or pathologic fractures in association with enlarged dentigerous cysts. The procedure for extrusion and subsequent extraction of high-risk M3s is called orthodontic extraction. This is a systematic review of the available approaches for orthodontic extraction of impacted mandibular M3s in close proximity to the mandibular canal and their outcomes. The PubMed, Scopus, Cochrane Central Register of Controlled Trials (CENTRAL), DOAJ, Google Scholar, OpenGrey, Iranian Science Information Database (SID), Iranmedex, and Irandoc databases were searched using specific keywords up to June 2, 2014. Studies were evaluated based on predetermined eligibility criteria, treatment approaches, and their outcomes. Thirteen articles met the inclusion criteria. A total of 123 impacted teeth were extracted by orthodontic extraction and 2 cases were complicated by transient paresthesia. Three types of biomechanical approaches were used: 1) using the posterior maxillary region as the anchor for orthodontic extrusion of lower M3s, 2) simple cantilever springs attached to the M3 buttonhole, and 3) cantilever springs tied to a bonded orthodontic bracket on the M3 plus multiple-loop spring wire for distal movement of the M3. Osteo-periodontal status of M2s also improved uneventfully. Despite the drawbacks of orthodontic extraction, removal of deeply impacted M3s using the described techniques is safe with regard to mandibular nerve injury and neurologic damage. Orthodontic extraction is recommended for extraction of impacted M3s that present a high risk of postoperative osteo-periodontal defects on the distal surface of the adjacent M2 and those associated with dentigerous cysts. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by

Winging of scapula due to serratus anterior tear

Directory of Open Access Journals (Sweden)

Varun Singh Kumar

2014-10-01

Full Text Available 【Abstract】Winging of scapula occurs most commonly due to injury to long thoracic nerve supplying serratus anterior muscle. Traumatic injury to serratus anterior muscle itself is very rare. We reported a case of traumatic winging of scapula due to tear of serratus anterior muscle in a 19-year-old male. Winging was present in neutral position and in extension of right shoulder joint but not on "push on wall" test. Patient was managed conservatively and achieved satisfactory result. Key words: Serratus anterior tear; Scapula; Wounds and injuries

Polymerase chain reaction in unilateral cases of presumed viral anterior uveitis.

Science.gov (United States)

Shoughy, Samir S; Alkatan, Hind M; Al-Abdullah, Abdulelah A; El-Khani, Albarah; de Groot-Mijnes, Jolanda Df; Tabbara, Khalid F

2015-01-01

Anterior uveitis is the most common form of intraocular inflammation. The main aim of this study was to determine the viral etiology in patients with unilateral cases of anterior uveitis. A total of 12 consecutive patients with the diagnosis of idiopathic unilateral anterior uveitis were included prospectively. Aqueous specimens were obtained from each patient by anterior chamber paracentesis and subjected to the detection of viral DNA/RNA genome by polymerase chain reaction assay for herpes simplex virus, varicella zoster virus, cytomegalovirus, Epstein-Barr virus, and rubella virus. There were six male and six female patients. The mean age was 43 years, with an age range of 11-82 years. All 12 cases presented with unilateral anterior uveitis. In four (33%) patients, polymerase chain reaction was positive for viral genome. Two patients were positive for herpes simplex virus type 1, one patient was positive for cytomegalovirus and one for Epstein-Barr virus. Recent molecular diagnostic assays would help in the identification of the causative agent in patients with unilateral anterior uveitis.

Experimental occlusal interferences. Part V. Mandibular rotations versus hemimandibular translations.

Science.gov (United States)

Christensen, L V; Rassouli, N M

1995-12-01

Frontal plane mandibular rotations and corresponding hemimandibular translations were studied in vitro by using direct observations of a human cadaver mandible and in vivo by using the indirect observations of rotational electrognathography. A comparison between the two methods showed that rotational electrognathography erred in measuring the clinically relevant hemimandibular translations resulting from mandibular rotations having a unilateral molar point (simulated occlusal interference) as the pivot of frontal plane torque. In vitro frontal plane rotations about a unilateral mandibular molar tooth (simulated occlusal interference) suggested that the resulting hemimandibular upward translations of the lateral portion of the mandibular condyle, contralateral to the molar tooth, would cause considerable compressive loading of the temporomandibular joint disc.

Radiographic temporomandibular joint abnormality in adults with micrognathia and juvenile rheumatoid arthritis

Energy Technology Data Exchange (ETDEWEB)

Larheim, T.A.; Haanaes, H.R.; Dale, K. (Oslo Univ. (Norway))

1981-01-01

Radiographic findings of the upper and lower jaw bone of 20 adult patients with micrognathia, bird face, and juvenile rheumatoid arthritis are reported. In all patients a symmetrically underdeveloped mandible with the chin posteriorly positioned was found at cephalometry. Arthritic lesion of the temporomandibular joint, mostly symmetric, with limitation of movement and secondary arthrosis, was observed in all patients. Complete absence of the mandibular head was frequent (75%). The fossa was generally flat, probably due to growth disturbance of the tubercle. Abnormal anterior position of the mandibular head occurred in almost half of the patients. The degree of mandibular growth disturbance seemed to be correlated to the severity of the arthritis, indicating the arthritis to be a causal mechanism of micrognathia.

Morphometric evaluation of condylar cartilage of growing rats in response to mandibular retractive forces

Directory of Open Access Journals (Sweden)

Milena Peixoto Nogueira de Sá

2013-08-01

Full Text Available INTRODUCTION: The mandibular condylar surface is made up of four layers, i.e., an external layer composed of dense connective tissue, followed by a layer of undifferentiated cells, hyaline cartilage and bone. Few studies have demonstrated the behavior of the condylar cartilage when the mandible is positioned posteriorly, as in treatments for correcting functional Class III malocclusion. OBJECTIVE: The aim of this study was to assess the morphologic and histological aspects of rat condyles in response to posterior positioning of the mandible. METHODS: Thirty five-week-old male Wistar rats were selected and randomly divided into two groups: A control group (C and an experimental group (E which received devices for inducing mandibular retrusion. The animals were euthanized at time intervals of 7, 21 and 30 days after the experiment had began. For histological analysis, total condylar thickness was measured, including the proliferative, hyaline and hypertrophic layers, as well as each layer separately, totaling 30 measurements for each parameter of each animal. RESULTS: The greatest difference in cartilage thickness was observed in 21 days, although different levels were observed in the other periods. Group E showed an increase of 39.46% in the total layer, reflected by increases in the thickness of the hypertrophic (42.24%, hyaline (46.92% and proliferative (17.70% layers. CONCLUSIONS: Posteriorly repositioning the mandible produced a series of histological and morphological responses in the condyle, suggesting condylar and mandibular adaptation in rats.

Morphometric evaluation of condylar cartilage of growing rats in response to mandibular retractive forces.

Science.gov (United States)

de Sá, Milena Peixoto Nogueira; Zanoni, Jacqueline Nelisis; de Salles, Carlos Luiz Fernandes; de Souza, Fabrício Dias; Suga, Uhana Seifert Guimarães; Terada, Raquel Sano Suga

2013-01-01

The mandibular condylar surface is made up of four layers, i.e., an external layer composed of dense connective tissue, followed by a layer of undifferentiated cells, hyaline cartilage and bone. Few studies have demonstrated the behavior of the condylar cartilage when the mandible is positioned posteriorly, as in treatments for correcting functional Class III malocclusion. The aim of this study was to assess the morphologic and histological aspects of rat condyles in response to posterior positioning of the mandible. Thirty five-week-old male Wistar rats were selected and randomly divided into two groups: A control group (C) and an experimental group (E) which received devices for inducing mandibular retrusion. The animals were euthanized at time intervals of 7, 21 and 30 days after the experiment had began. For histological analysis, total condylar thickness was measured, including the proliferative, hyaline and hypertrophic layers, as well as each layer separately, totaling 30 measurements for each parameter of each animal. The greatest difference in cartilage thickness was observed in 21 days, although different levels were observed in the other periods. Group E showed an increase of 39.46% in the total layer, reflected by increases in the thickness of the hypertrophic (42.24%), hyaline (46.92%) and proliferative (17.70%) layers. Posteriorly repositioning the mandible produced a series of histological and morphological responses in the condyle, suggesting condylar and mandibular adaptation in rats.

Pediatric mandibular fractures: a free hand technique.

Science.gov (United States)

Davison, S P; Clifton, M S; Davison, M N; Hedrick, M; Sotereanos, G

2001-01-01

The treatment of pediatric mandibular fractures is rare, controversial, and complicated by mixed dentition. To determine if open mandibular fracture repair with intraoral and extraoral rigid plate placement, after free hand occlusal and bone reduction, without intermaxillary fixation (IMF), is appropriate and to discuss postoperative advantages, namely, maximal early return of function and minimal oral hygiene issues. A group of 29 pediatric patients with a mandibular fracture were examined. Twenty pediatric patients (13 males and 7 females) with a mean age of 9 years (age range, 1-17 years) were treated using IMF. All patients were treated by the same surgeon (G.S.). Surgical time for plating was reduced by 1 hour, the average time to place patients in IMF. The patients who underwent open reduction internal fixation without IMF ate a soft mechanical diet by postoperative day 3 compared with postoperative day 16 for those who underwent IMF. Complication rates related to fixation technique were comparable at 20% for those who did not undergo IMF and 33% for those who did. We believe that free hand reduction is a valuable technique to reduce operative time for pediatric mandibular fractures. It maximizes return to function while minimizing the oral hygiene issues and hardware removal of intermaxillary function.

Forced extrusion for removal of impacted third molars close to the mandibular canal Extrusión forzada para extraer los terceros molares impactados cerca del canal mandibular

Directory of Open Access Journals (Sweden)

Dennis Flanagan DDS

2012-03-01

Full Text Available Impacted mandibular third molars can be located in close proximity to the mandibular canal. This creates a risk for the nerve or artery injury. These are contained in the canal. However, the impacted third molar can be moved coronally by orthodontic means, after removal of overlying bone, and safely extracted. The orthodontic intervention slowly moves the tooth apex away from the mandibular canal and reduces the potential for a neural injury. This method may be useful for older patients with root apices that approximate or are actually located in the mandibular canal. This technique needs further study. There is a theoretical potential for neural or arterial injury from physical contact of the tooth apex as it moves by or through the mandibular canal.Los terceros molares inferiores impactados pueden localizarse muy cerca del canal mandibular. Esto constituye un riesgo de lesión del nervio o la arteria, que se localizan dentro del canal. No obstante, el tercer molar impactado puede desplazarse en dirección coronal con ortodoncia, tras ostectomía del hueso suprayacente, y extraerse sin riesgos. La intervención ortodóncica desplaza lentamente el ápice del diente fuera del canal mandibular y reduce la posibilidad de lesión neural. Este método puede ser útil para pacientes de edad avanzada con ápices dentales que se aproximan o en realidad se localizan en el canal mandibular. La técnica necesita un estudio adicional. Hay la posibilidad teórica de lesión neural o arterial a partir del contacto físico del ápice del diente a medida que se desplaza a través del canal mandibular.

Radiographic evaluation of the course and visibility of the mandibular canal

International Nuclear Information System (INIS)

Jung, Yun Hoa; Cho, Bong Hae

2014-01-01

This study was performed to investigate the course of the mandibular canal on panoramic radiography and the visibility of this canal on both panoramic radiography and cone-beam computed tomography (CBCT). The study consisted of panoramic radiographs and CBCT images from 262 patients. The course of the mandibular canal, as seen in panoramic radiographs, was classified into four types: linear, elliptical, spoon-shaped, and turning curves. The visibility of this canal from the first to the third molar region was evaluated by visually determining whether the mandibular canal was clearly visible, probably visible, or invisible. The visibility of the canal on panoramic radiographs was compared with that on CBCT images. Elliptical curves were most frequently observed along the course of the mandibular canal. The percentage of clearly visible mandibular canals was the highest among the spoon-shaped curves and the lowest among the linear curves. On panoramic radiographs, invisible mandibular canals were found in 22.7% of the examined sites in the first molar region, 11.8% in the second molar region, and 1.3% in the third molar region. On CBCT cross-sectional images, the mandibular canal was invisible in 8.2% of the examined sites in the first molar region, 5.7% in the second molar region, and 0.2% in the third molar region. The visibility of this canal was lower in the first molar region than in the third molar region. The mandibular canal presented better visibility on CBCT images than on panoramic radiographs.

FIXED OR REMOVABLE APPLIANCE FOR EARLY ORTHODONTIC TREATMENT OF FUNCTIONAL ANTERIOR CROSSBITE.

Science.gov (United States)

Wiedel, Anna-Paulina

2015-01-01

Anterior crossbite with functional shift also called pseudo Class III is a malocclusion in which the incisal edges of one or more maxillary incisors occlude with the incisal edges of the mandibular incisors in centric relationship: the mandible and mandibular incisors are then guided anteriorly in central occlusion resulting in an anterior crossbite. Early correction, at the mixed dentition stage, is recommended, in order to avoid a compromising dentofacial condition which could result in the development of a true Class III malocclusion and temporomandibular symptoms. Various treatment options are available. The method of choice for orthodontic correction of this condition should not only be clinically effective, with long-term stability, but also cost-effective and have high patient acceptance, i.e. minimal perceived pain and discomfort. At the mixed dentition stage, the condition may be treated by fixed (FA) or removable appliance (RA). To date there is insufficient evidence to determine the preferred method. The overall aim of this thesis was therefore to compare and evaluate the use of FA and RA for correcting anterior crossbite with functional shift in the mixed dentition, with special reference to clinical effectiveness, stability, cost-effectiveness and patient perceptions. Evidence-based, randomized controlled trial (RCT) methodology was used, in order to generate a high level of evidence. The thesis is based on the following studies: The material comprised 64 patients, consecutively recruited from the Department of Orthodontics, Faculty of Odontology, Malmö University, Sweden and from one Public Dental Health Service Clinic in Malmö, Skane County Council, Sweden. The patients were no syndrome and no cleft patients. The following inclusion criteria were applied: early to late mixed dentition, anterior crossbite affecting one or more incisors with functional shift, moderate space deficiency in the maxilla, no inherent skeletal Class III discrepancy, ANB

Mandibular ramus fractures: a rarity.

Science.gov (United States)

Kale, Tejraj Pundalik; Kotrashetti, S M; Louis, Archana; Lingaraj, J B; Sarvesh, B U

2013-01-01

To determine the incidence of mandibular ramus fractures in KLE's PK Hospital and to analyze the outcome of open reduction and internal fixation of these fractures. Using a retrospective study design, records of all trauma patients who reported to the Department of Oral and Maxillofacial Surgery, KLE's PK Hospital Belgaum, between the years January 2006 to October 2011 was obtained from the medical records office. The data variables that were analyzed were the name, age, sex, cause of injury, pretreatment occlusion, treatment given, period of MMF and post-treatment occlusion. Total number of mandibular fracture cases was 298. Ramus fractures were 10 in number which accounted for 3.3% of fractures. The age range of these 10 patients was seen to be between 20 to 80 years with the average age being 35.6 years. Of these 10 patients, 9 were male and 1 was female and 7 patients were treated by open reduction and internal fixation and the remaining 3 by closed reduction. The average period of MMF was 3 days for the patients who underwent open reduction and internal fixation. There was improvement in occlusion in all 10 patients post-treatment and there was no complication reported in any of the cases. Ramus fractures accounted for 3.3% of all mandibular fractures. Open reduction and internal fixation of ramus fractures ensures adequate functional and anatomic reduction. This study makes an attempt to throw a light on the increasing incidence of ramus fractures and a successful management of these fractures by open reduction and internal fixation. How to cite this article: Kale TP, Kotrashetti SM, Louis A, Lingaraj JB, Sarvesh BU. Mandibular Ramus Fractures: A Rarity. J Contemp Dent Pract 2013;14(1):39-42. Source of support: Nil Conflict of interest: None declared.

Implant-supported removable partial dentures in the mandible : A 3-16 year retrospective study

NARCIS (Netherlands)

Jensen, Charlotte; Meijer, Henny J A; Raghoebar, Gerry M; Kerdijk, Wouter; Cune, Marco S

PURPOSE: The purpose of this retrospective study was to assess performance, together with biological and technical complications, of implant-supported removable partial dentures (ISRPD) in mandibular Kennedy class I situations with implants placed in the anterior or posterior position. METHODS: 23

Implant-supported removable partial dentures in the mandible : A 3-16 year retrospective study

NARCIS (Netherlands)

Jensen, Charlotte; Meijer, Henny J. A.; Raghoebar, Gerry M.; Kerdijk, Wouter; Cune, Marco S.

Purpose: The purpose of this retrospective study was to assess performance, together with biological and technical complications, of implant-supported removable partial dentures (ISRPD) in mandibular Kennedy class I situations with implants placed in the anterior or posterior position. Methods: 23

Cerebro-costo-mandibular syndrome: Report of two cases.

Science.gov (United States)

Abdalla, Wael; Panigrahy, Ashok; Bartoletti, Stefano C

2011-01-01

Cerebro-costo-mandibular syndrome (CCMS) is a rare syndrome that includes a constellation of mandibular hypoplasia and posterior rib defects as its basic features. Additional features can include hearing loss, tracheal cartilage abnormalities, scoliosis, elbow hypoplasia, and spina bifida. Here we report two cases of CCMS and discuss the reported long-term outcome of the disease.

Compensatory orthodontic treatment of skeletal Class III malocclusion with anterior crossbite.

Science.gov (United States)

Valladares Neto, José

2014-01-01

This case report describes the orthodontic treatment of an adult patient with skeletal Class III malocclusion and anterior crossbite. A short cranial base led to difficulties in establishing a cephalometric diagnosis. The patient's main complaint comprised esthetics of his smile and difficulties in mastication. The patient did not have the maxillary first premolars and refused orthognathic surgery. Therefore, the treatment chosen was orthodontic camouflage and extraction of mandibular first premolars. For maxillary retraction, the vertical dimension was temporarily increased to avoid obstacles to orthodontic movement. At the end of the treatment, ideal overjet and overbite were achieved. Examination eight years after orthodontic treatment revealed adequate clinical stability. This case report was submitted to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO) as part of the requirements to become a BBO diplomate.

Pearls of mandibular trauma management.

Science.gov (United States)

Koshy, John C; Feldman, Evan M; Chike-Obi, Chuma J; Bullocks, Jamal M

2010-11-01

Mandibular trauma is a common problem seen by plastic surgeons. When fractures occur, they have the ability to affect the patient's occlusion significantly, cause infection, and lead to considerable pain. Interventions to prevent these sequelae require either closed or open forms of reduction and fixation. Physicians determining how to manage these injuries should take into consideration the nature of the injury, background information regarding the patient's health, and the patient's comorbidities. Whereas general principles guide the management of the majority of injuries, special consideration must be paid to the edentulous patient, complex and comminuted fractures, and pediatric patients. These topics are discussed in this article, with a special emphasis on pearls of mandibular trauma management.

Mandibular pseudocarcinomatous hyperplasia.

Science.gov (United States)

Warter, A; Walter, P; Meyer, C; Barrière, P; Galatir, L; Wilk, A

2000-08-01

Three unusual cases of pseudocarcinomatous (pseudoepitheliomatous) hyperplasia (PH) affecting chronic osteomyelitic mandibular sequestra are reported to highlight the differences with the various squamous neoplasms which occur in that site. In two patients carrying a mandibular graft following the excision of an ameloblastoma, mucosal ulcers resulted in chronic osteomyelitis. In a third patient, an apical dental infection was associated with fistulated osteomyelitis. Histology of the three sequestra showed an intraosseous squamous proliferation. It was characterized by a peripheral involvement of medullary spaces, the more mature epithelial layer covering the bone trabeculae without intervening stroma, and the basal type epithelial layer surrounding a central fibrovascular core. There were no histological or cytological signs of malignancy. PH shows an inverted pattern when compared with the centro-medullary tumoural islands seen in the various oral or odontogenic squamous neoplasms which occur in the jaws. The lack of signs of malignancy distinguish PH from common squamous cell carcinomas. A short clinical course is an important feature in the distinction of PH from the well differentiated squamous cell carcinomas which may develop in fistulated chronic osteomyelitis.

Distracción mandibular y articulación temporomandibular Mandibular distraction and the temporomandibular joint

Directory of Open Access Journals (Sweden)

F. Monje Gil

2004-08-01

Full Text Available Los pacientes con deformidades craneofaciales requieren generalmente multiples y, a veces, complejos procedimientos quirurgicos para reconstruir tejidos blandos y duros alterados. Un avance importante en cirugía reconstructiva es el alargamiento de la mandibula por distracción que tiene la ventaja de una cirugía menos agresiva que determinados tipos de osteotomías. Con esta técnica una osteotomía bicortical se hace en distintas zonas de la mandibula colocandose el distractor hasta alcanzar los efectos deseados. Aunque las fuerzas aplicadas se han mostrado eficaces para alargar la mandíbula, sus efectos en segmentos proximales y distales, incluyendo la articulación temporomandibular no han sido analizados sistemáticamente. En este artículo se repasa trabajos experimentales y clínicos en los que se detalla la relación entre distracción mandibular y articulación temporomandibular.Abstract: Patients with severe craniofacial abnormalities often require multiple and complex surgical procedures to reconstruct maldeveloped hard and soft tissues of the maxillofacial complex. An important advance in reconstructive surgery is mandibular lengthening by gradual distraction, which takes advantage to be less agressive surgery than some osteotomies. With this technique, a bicortical osteotomy is made at the angle of the deficient mandible, and an expansion appliance is placed across the osteotomy line. Although the applied forces have been shown to lengthen the mandible effectively in the region of the application, their effects on the proximal and distal mandibular segments, including the temporomandibular joint region, have not been analyzed systematically. In this article, we study several experimental and clinical papers where it describes the relationship between mandibular distraction and temporomandibular joint.

Mandibular kinematics and maximum voluntary bite force following segmental resection of the mandible without or with reconstruction.

Science.gov (United States)

Linsen, Sabine S; Oikonomou, Annina; Martini, Markus; Teschke, Marcus

2018-05-01

The purpose was to analyze mandibular kinematics and maximum voluntary bite force in patients following segmental resection of the mandible without and with reconstruction (autologous bone, alloplastic total temporomandibular joint replacement (TMJ TJR)). Subjects operated from April 2002 to August 2014 were enrolled in the study. Condylar (CRoM) and incisal (InRoM) range of motion and deflection during opening, condylar retrusion, incisal lateral excursion, mandibular rotation angle during opening, and maximum voluntary bite force were determined on the non-affected site and compared between groups. Influence of co-factors (defect size, soft tissue deficit, neck dissection, radiotherapy, occlusal contact zones (OCZ), and time) was determined. Twelve non-reconstructed and 26 reconstructed patients (13 autologous, 13 TMJ TJR) were included in the study. InRoM opening and bite force were significantly higher (P ≤ .024), and both condylar and incisal deflection during opening significantly lower (P ≤ .027) in reconstructed patients compared with non-reconstructed. Differences between the autologous and the TMJ TJR group were statistically not significant. Co-factors defect size, soft tissue deficit, and neck dissection had the greatest impact on kinematics and number of OCZs on bite force. Reconstructed patients (both autologous and TMJ TJR) have better overall function than non-reconstructed patients. Reconstruction of segmental mandibular resection has positive effects on mandibular function. TMJ TJR seems to be a suitable technique for the reconstruction of mandibular defects including the TMJ complex.

Therapeutic outcome of various treatment modalities for the management of 34 cases of mandibular unicystic ameloblastoma

Directory of Open Access Journals (Sweden)

Rajib Khadka

2018-03-01

Full Text Available Background & Objectives: Unicystic ameloblastoma is a challenge, as conservative modalities have high recurrence chances whereas radical modalities have high morbidity for defects and deformity. Enucleation with peripheral ostectomy and Carnoy’s solution is an intermediate treatment with less risk of recurrence and good outcome. The objectives of the study was to determine the therapeutic outcome for various treatment modalities for the management of mandibular unicystic ameloblastoma.Materials & Methods:Retrospective analysis of 34 cases from 2005 to 2014 was done and were analysed in terms of demographic profiles, treatment modalities and its efficacy (recurrence in 6 years’ follow up time.Results: The total number of patients was 34. The age ranged from 12 years to 28 years with a mean age of 18.82 years. Gender distribution was 21 males (61.8% and 13 females (38.2%. The location found was 26 (76.5% cases in posterior mandibular region and 8 (23.5% cases in the anterior mandibular region. Size of the lesions was small in 10 (29.4% cases, medium in 18 (52.9% cases and large in 6 (17.6% cases. Perforation of buccal or lingual cortex was present in 6 (17.6% and no preforation in 28 (82.4%. Treatment modalities done was marsupilisation in 6 (17.6% cases, enucleation with peripheral ostectomy with caroney solution in 22 (64.7% cases and resection with safe margin in 6 (17.6% cases. Recurrence occurred in 8 (23.5% cases and no recurrence in 26 (76.5% cases.Conclusion:Enucleation with peripheral ostectomy and Carnoy’s solution is one of the good treatment modality for unicystic ameloblastoma of the mandible whereas complete resection of the mandible with safe margin has low risk of recurrence in long term follow up.

Mandibular marginal contouring in oriental aesthetic surgery: refined surgical concept and operative procedure.

Science.gov (United States)

Satoh, Kaneshige; Mitsukawa, Nobuyuki

2014-05-01

In aesthetic mandibular contouring surgery, which is often conducted in Asians, the operative procedure is thought to deliver a more aesthetic mandibular shape by means of contouring conducted as a whole from the ramus to the symphysis. The authors describe the refined concept and operative procedures of mandibular marginal contouring. For the 7-year period from 2004 to 2011, mandibular marginal contouring has been used in 57 consecutive series of Japanese subjects. Patient ages ranged from 18 to 33 years, and the subjects included 15 men and 42 women. The surgery was carried out by cutting off the protruding deformed mandibular margin from the ramus to the symphysis. In 53 of 57 cases, the focus was on angle contouring. Concomitant genioplasty by horizontal osteotomy of the chin was conducted in 42 of 57 cases (recession, advancement, shortening, elongation, and correction of the shift variously). In 22 materials exhibiting bulk around the mandibular, the ramus to the body was excised sagittally and thinned. In all the patients, mandibular marginal contouring from the ramus to the symphysis was completed. Partial masseter muscle resection was conducted in 11 of 57 cases. Mandibular contouring effectively achieved a highly satisfactory result in all cases. The upper portion of the peripheral branch of the trunk of the mental nerve was dissected by an electric scalpel in 1 case but sutured immediately using an 8-0 nylon stitch. Transient palsy of the mental nerve was noticed in a few cases but subsided in 1 to 2 months. No particular complications were encountered. No secondary revision was required in this series. In mandibular angle plasty, mandibular marginal contouring from the ramus to the symphysis should be carried out by cutting off the angle keeping in mind the entire mandibular shape. This concept and the procedure can deliver greater patient satisfaction.

Mandibular asymmetry and the fourth dimension.

Science.gov (United States)

Kaban, Leonard B

2009-03-01

This paper represents more than 30 years of discussion and collaboration with Drs Joseph Murray and John Mulliken in an attempt to understand growth patterns over time (ie, fourth dimension) in patients with hemifacial microsomia (HFM). This is essential for the development of rational treatment protocols for children and adults with jaw asymmetry. Traditionally, HFM was thought of as a unilateral deformity, but it was recognized that 20% to 30% of patients had bilateral abnormalities. However, early descriptions of skeletal correction addressed almost exclusively lengthening of the short (affected) side of the face. Based on longitudinal clinical observations of unoperated HFM patients, we hypothesized that abnormal mandibular growth is the earliest skeletal manifestation and that restricted growth of the mandible plays a pivotal role in progressive distortion of both the ipsilateral and contralateral facial skeleton. This hypothesis explains the progressive nature of the asymmetry in patients with HFM and provides the rationale for surgical lengthening of the mandible in children to prevent end-stage deformity. During the past 30 years, we have learned that this phenomenon of progressive distortion of the adjacent and contralateral facial skeleton occurs with other asymmetric mandibular undergrowth (tumor resection, radiation therapy, or posttraumatic defects) and overgrowth (mandibular condylar hyperplasia) conditions. In this paper, I describe the progression of deformity with time in patients with mandibular asymmetry as a result of undergrowth and overgrowth. Understanding these concepts is critical for the development of rational treatment protocols for adults with end-stage asymmetry and for children to minimize secondary deformity.

Hard and Soft Tissue Changes Following Maxillary Distraction Osteogenesis and Mandibular Setback with Bilateral Sagittal Split Osteotomy.

Science.gov (United States)

Bawane, Shilpa S; Andrade, Neelam N

2016-12-01

(1) To highlight the role of intraoral submerged device in distraction osteogenesis (DO) of patients requiring two jaw surgeries for the correction of severe developmental maxillary hypoplasia (MH) and mandibular prognathism (MP) (2) To analyse the hard and soft tissue changes following maxillary DO and mandibular setback with bilateral sagittal split osteotomy (BSSO) in patients with severe MH and MP requiring two jaw surgeries. During the period Jan 2004 to Dec 2006, five patients with severe developmental MH along with MP were treated. In 1st stage maxillary distraction was done. Distraction started on 6th postoperative day, 1 mm distraction was carried out for 10-15 days on either side. Serial radiographs were taken immediate postoperative period for baseline comparison, post-distraction and at the end of distraction. After a period of 3-4 months of distraction 2nd stage was done. In 2nd stage, mandibular setback was done with BSSO and distractors were removed under general anesthesia. Radiographs were taken immediately and at 4 months post-operatively. Cephalometric tracings were carried out preoperatively, post DO and finally after mandibular setback with BSSO. The mean horizontal movement of maxilla was 11.4 mm at ANS and 9.6 mm at A point. Upper incisor edge was advanced by 8.8 mms. SNA increased by 8.4° and SNB decreased by 4.6°. Nasal projection advanced by 4°. Nasolabial angle normalized in all patients, mean change achieved was 10.8°. Upper lip moved forward by 5.4 mm. Lower lip moved backward by 5.4 mm. Mandible positioned backward by 4 mm at B point. No vertical change occurred in the position of A, ANS and upper incisor edges. Mean increase in skeletal angle of convexity was 26.4°. Concave profile was significantly changed to convex in all patients. Maxillary DO and mandibular setback with BSSO was associated with improved facial balance and esthetics.

Thin-plate spline graphical analysis of the mandible in mandibular prognathism.

Science.gov (United States)

Chang, Hsin-Fu; Chang, Hong-Po; Liu, Pao-Hsin; Chang, Chih-Han

2002-11-01

The chin cup has been used to treat skeletal mandibular prognathism in growing patients for 200 years. The pull on the orthopedic-force chin cup is oriented along a line from the mandibular symphysis to the mandibular condyle. Various levels of success have been reported with this restraining device. The vertical chin cup produces strong vertical compression stress on the maxillary molar regions when the direction of traction is 20 degrees more vertical than the chin-condyle line. This treatment strategy may prevent relapse due to counter-clockwise rotation of the mandible. In this report, we describe a new strategy for using chin-cup therapy involving thin-plate spline (TPS) analysis of lateral cephalometric roentgenograms to visualize transformation of the mandible. The actual sites of mandibular skeletal change are not detectable with conventional cephalometric analysis. A case of mandibular prognathism treated with a chin cup and a case of dental Class III malocclusion without orthodontic treatment are described. The case analysis illustrates that specific patterns of mandibular transformation are associated with Class III malocclusion with or without orthopedic therapy, and that visualization of these deformations is feasible using TPS graphical analysis.

Surgical-prosthetic treatment of large mandibular cysts

Directory of Open Access Journals (Sweden)

Džambas Ljubiša D.

2003-01-01

Full Text Available This paper presents a combined surgical-prosthetic procedure of reconstructing mandibular bone defect in a 53 year old patient, following enucleation of a mandibular cyst (Cystectomy Partsch II. After a thorough diagnostic evaluation, a surgical procedure was planned with the particular attention to the nature of the disease, patient’s condition, size and extension of the cyst, tissue loss, and the possibilities of prosthetic management of a mandibular bone defect with partial postresection dental prosthesis. It is of great importance to point to the significance of teamwork of a maxillofacial surgeon and a specialist in prosthodontics. This kind of cooperation provided very effective and less risky soft tissue, as well as bone tissue regeneration (osteogenesis. The patient’s recovery was fast, and he could return to his daily activities and work without significant changes regarding quality of life after surgery and prosthetic treatment.

Prospective audit of mandibular fractures at the Charlotte Maxeke ...

African Journals Online (AJOL)

Objective. This study was a prospective cross-sectional clinical audit of patients with mandibular fractures at the Charlotte Maxeke Johannesburg Academic Hospital. Methods. Between 1 March and 31 August 2004, patients with mandibular fractures seen by one clinician had their details recorded. Results. The female:male ...

Development plates for stable internal fixation: Study of mechanical resistance in simulated fractures of the mandibular condyle.

Science.gov (United States)

Celegatti Filho, Tóride Sebastião; Rodrigues, Danillo Costa; Lauria, Andrezza; Moreira, Roger William Fernandes; Consani, Simonides

2015-01-01

To develop Y-shaped plates with different thicknesses to be used in simulated fractures of the mandibular condyle. Ten plates were developed in Y shape, containing eight holes, and 30 synthetic polyurethane mandible replicas were developed for the study. The load test was performed on an Instron Model 4411 universal testing machine, applying load in the mediolateral and anterior-posterior positions on the head of the condyle. Two-way ANOVA with Tukey testing with a 5% significance level was used. It was observed that when the load was applied in the medial-lateral plate of greater thickness (1.5 mm), it gave the highest strength, while in the anteroposterior direction, the plate with the highest resistance was of the lesser thickness (0.6 mm). A plate with a thickness of 1.5 mm was the one with the highest average value for all displacements. In the anteroposterior direction, the highest values of resistance were seen in the displacement of 15 mm. After comparing the values of the biomechanical testing found in the scientific literature, it is suggested that the use of Y plates are suitable for use in subcondylar fractures within the limitations of the study. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Cutaneous Metastasis of Medullary Carcinoma Thyroid Masquerading as Subcutaneous Nodules Anterior Chest and Mandibular Region

Directory of Open Access Journals (Sweden)

Rahul Mannan

2014-01-01

Full Text Available Cutaneous metastasis of underlying primary malignancies can present to dermatologist with chief complaints of cutaneous lesions. The underlying malignancy is generally diagnosed much later after a complete assessment of the concerned case. Medullary carcinoma thyroid (MCT is a relatively uncommon primary neoplasia of the thyroid. Very few cases presenting as cutaneous metastases of MCT have been reported in the literature. Most of the cases which have been reported are of the papillary and the follicular types. We here report a case of a patient who presented in the dermatology clinic with the primary complaint of multiple subcutaneous nodules in anterior chest wall and left side of body of mandible. By systematic application of clinical and diagnostic skills these nodules were diagnosed as cutaneous metastasis of MCT bringing to the forefront a history of previously operated thyroid neoplasm. So clinically, the investigation of a flesh coloured subcutaneous nodule, presenting with a short duration, particularly in scalp, jaw, or anterior chest wall should include possibility of metastastic deposits. A dermatologist should keep a possibility of an internal organ malignancy in patients while investigating a case of flesh coloured subcutaneous nodules, presenting with short duration. A systematic application of clinical and diagnostic skills will eventually lead to such a diagnosis even when not suspected clinically at its primary presentation. A prompt and an emphatic diagnosis and treatment will have its bearing on the eventual outcome in all these patients.

Variant Root Morphology of Third Mandibular Molar in Normal and ...

African Journals Online (AJOL)

isaac kipyator

2017-11-12

Nov 12, 2017 ... ABSTRACT. The mandibular third molar poses a challenge to dental surgeons due to it's unpredictable morphology ... treatment in the School of Dental Sciences since 2010. ... mandibular third molar include presence of three.

Quiste óseo aneurismático mandibular

Directory of Open Access Journals (Sweden)

Denia Morales Navarro

Full Text Available El quiste óseo aneurismático es definido como una lesión osteolítica expansiva que consiste en espacios llenos de sangre y canales divididos por tabiques de tejido conectivo, los cuales contienen tejido osteoide y células gigantes multinucleadas. El objetivo es presentar un caso clínico poco común de un quiste óseo aneurismático de la región del cuerpo mandibular. Se trata de una paciente femenina de 39 años de edad que acudió a consulta externa del Servicio de Cirugía Maxilofacial del Hospital Universitario "General Calixto García" por aumento de volumen en región mandibular derecha y dolor intenso de 1 mes de evolución. Radiográficamente se detectó un área radiolúcida unilocular de bordes bien definidos; se realizó curetaje de la cavidad, y estudio histopatológico de la lesión que informó la presencia de un quiste óseo aneurismático. Se concluye que el quiste óseo aneurismático es más común en los huesos largos y en la región del ángulo mandibular en el esqueleto facial, por lo que la presentación de este en el cuerpo mandibular resulta de interés.

Surgery preceding orthodontics in bimaxillary cases

Directory of Open Access Journals (Sweden)

B Saravana Kumar

2015-01-01

Full Text Available Orthognathic surgery is performed to alter the shape of the jaws to increase the facial esthetic and improve the occlusions. Surgery prior orthodontics reduces the total length of the treatment of the patients, followed by orthodontics treatment. Advantages is positive outcome in short period of time. Surgical procedure includes Anterior Maxillary osteotomy and Anterior subapical mandibular osteotomy. Complication includes haemorrhage, paraesthesia, malunion of bone, etc.

Diagnosis and root canal treatment in a mandibular premolar with three canals.

Science.gov (United States)

Soares, Lanuce Rosa; Arruda, Marcos; de Arruda, Marcos Pôrto; Rangel, Andréa Leão; Takano, Edson; de Carvalho Júnior, Jacy Ribeiro; Saquy, Paulo Cesar

2009-01-01

This paper presents a case report of a left mandibular second premolar with three canals and three different apical foramina. A 39-year-old male patient presented to our clinic with pain in the mandibular left second premolar. Initially, pain was caused by cold stimulus and later was spontaneously. The intraoral clinical examination revealed a fractured amalgam restoration with occlusal caries. Percussion and cold (Endo-Frost) tests were positive. The radiographic examination showed the presence of two roots. The probable diagnosis was an acute pulpitis. After access cavity, it was observed remaining roof of the pulp chamber and mild bleeding in the tooth lingual area, indicating the possible presence of a third canal. The endodontic treatment was completed in a single session using Root ZX apex locator and K3 NiTi rotary system with surgical diameter corresponding to a .02/45 file in the three canals and irrigation with 1% sodium hypochlorite. The canals were obtured with gutta-percha cones and Sealer 26 using the lateral condensation technique. After 1 year of follow-up, the tooth was asymptomatic and periapical repair was observed radiographically. Internal alterations should be considered during the endodontic treatment of mandibular second premolars. The correct diagnosis of these alterations by the analysis of preoperative radiographs can help the location of two or more canals, thereby avoiding root therapy failure.

Combined maxillary and mandibular distraction osteogenesis in patients with hemifacial microsomia.

Science.gov (United States)

Sant'Anna, Eduardo Franzotti; Lau, Geórgia W T; Marquezan, Mariana; de Souza Araújo, Mônica Tirre; Polley, John W; Figueroa, Alvaro A

2015-05-01

Hemifacial microsomia is a deformity of variable expressivity with unilateral hypoplasia of the mandible and the ear. In this study, we evaluated skeletal soft tissue changes after bimaxillary unilateral vertical distraction. Eight patients (4 preadolescents 4 adolescents) each with a grade II mandibular deformity underwent a LeFort I osteotomy and an ipsilateral horizontal mandibular ramus osteotomy. A semiburied distraction device was placed over the ramus, and intermaxillary fixation was applied. Anteroposterior cephalometric and frontal photographic analyses were conducted before and after distraction. Statistics were used to analyze the preoperative and postoperative changes. Cephalometrically, the nasal floor and the occlusal and gonial plane angles decreased. The ratios of affected-unaffected ramus and gonial angle heights improved by 15% and 20%, respectively. The position of menton moved toward the midline. The photographic analysis showed a decrease of the nasal and commissure plane angles, and the chin moved to the unaffected side. The parallelism between the horizontal skeletal and soft tissue planes improved, with an increase in the affected side ramus height and correction of the chin point toward the midline. Simultaneous maxillary and mandibular distraction improved facial balance and symmetry. Patients in the permanent dentition with fixed orthodontic appliances and well-aligned dental arches responded well to this intervention. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Radiographic analysis of odontogenic cysts showing displacement of the mandibular canal

International Nuclear Information System (INIS)

Cho, Bong Hae

2003-01-01

To assess the radiographic findings of odontogenic cysts showing displacement of the mandibular canal using computed tomographic (CT) and panoramic images. CT and panoramic images of 63 odontogenic cysts (27 dentigerous, 16 odontogenic keratocysts, and 20 radicular cysts) were analyzed to evaluate the following parameters: the dimension and shape of the cysts, and the effect of the cysts on the mandibular canal and cortical plates. Of the 63 cysts examined in the study, 35 (55.6%) showed inferior displacement of the mandibular canal and 46 (73.0%) showed perforation of the canal. There were statistically significant differenced between CT and panoramic images in depicting displacement and perforation of the mandibular canal. Cortical expansion was seen in 46 cases (73.0%) and cortical perforation in 23 cases (36.5%). The radicular cysts showed cortical expansion and perforation less frequently than the other cyst groups. Large cysts of mandible should be evaluated by multiplanar CT images in order to detect the mandibular canal and cortical bone involvement.

Facilitation of bone resorption activities in synovial lavage fluid patients with mandibular condyle fractures.

Science.gov (United States)

Takano, H; Takahashi, T; Nakata, A; Nogami, S; Yusa, K; Kuwajima, S; Yamazaki, M; Fukuda, M

2016-05-01

The aim of this study was to investigate the bone resorption effect of the mediators delivered in joint cavity of patients with mandibular condyle fractures by detecting osteoclast markers using cellular biochemistry methods, and by analysing bone resorption activities via inducing osteoclast differentiation of the infiltrated cells from arthrocentesis. Sixteen joints in 10 patients with mandibular condyle fractures were evaluated. The control group consisted of synovial fluid (SF) samples from seven joints of four volunteers who had no clinical signs or symptoms involving the temporomandibular joint (TMJ) or disc displacement. We collected SF cells from all patients during therapeutic arthrocentesis. The infiltrating cells from TMJ SF were cultured, differentiated into tartrate-resistant acid phosphatase (TRAP)-positive osteoclast-like cells and examined bone resorption activities. We also investigated factors related to osteoclast induction of SF, using ELISA procedures. Osteoclast-like cells were induced from the SF cells obtained from all patients with condylar fractures. These multinucleated giant cells were positive for TRAP and actin, and had the ability to absorb dentin slices. The levels of macrophage colony-stimulating factor (M-CSF), prostaglandin E2 (PGE2), soluble form of receptor activator of nuclear factor kappa-B ligand (sRANKL) and osteoprotegerin (OPG), in SF samples from the patients, were significantly higher than in the controls. These findings indicate that bone resorption activities in SF from patients with mandibular condyle fractures were upregulated and may participate in the pathogenesis and wound healing. © 2016 The Authors. Journal of Oral Rehabilitation Published by John Wiley & Sons Ltd.

Congenitally missing mandibular second premolars: clinical options.

Science.gov (United States)

Kokich, Vincent G; Kokich, Vincent O

2006-10-01

Congenital absence of mandibular second premolars affects many orthodontic patients. The orthodontist must make the proper decision at the appropriate time regarding management of the edentulous space. These spaces can be closed or left open. If the space will be left open for an eventual restoration, the keys during orthodontic treatment are to create the correct amount of space and to leave the alveolar ridge in an ideal condition for a future restoration. If the space will be closed, the clinician must avoid any detrimental alterations to the occlusion and the facial profile. Some early decisions that the orthodontist makes for a patient whose mandibular second premolars are congenitally missing will affect his or her dental health for a lifetime. Therefore, the correct decision must be made at the appropriate time. In this article, we present and discuss various treatment alternatives for managing orthodontic patients with at least 1 congenitally missing mandibular second premolar.

Surface electromyographic patterns of masticatory, neck, and trunk muscles in temporomandibular joint dysfunction patients undergoing anterior repositioning splint therapy.

Science.gov (United States)

Tecco, Simona; Tetè, Stefano; D'Attilio, Michele; Perillo, Letizia; Festa, Felice

2008-12-01

The aim of this study was to investigate the surface electromyographic (sEMG) activity of neck, trunk, and masticatory muscles in subjects with temporomandibular joint (TMJ) internal derangement treated with anterior mandibular repositioning splints. sEMG activities of the muscles in 34 adult subjects (22 females and 12 males; mean age 30.4 years) with TMJ internal derangement were compared with a control group of 34 untreated adults (20 females and 14 males; mean age 31.8 years). sEMG activities of seven muscles (anterior and posterior temporalis, masseter, posterior cervicals, sternocleidomastoid, and upper and lower trapezius) were studied bilaterally, with the mandible in the rest position and during maximal voluntary clenching (MVC), at the beginning of therapy (T0) and after 10 weeks of treatment (T1). Paired and Student's t-tests were undertaken to determine differences between the T0 and T1 data and in sEMG activity between the study and control groups. At T0, paired masseter, sternocleidomastoid, and cervical muscles, in addition to the left anterior temporal and right lower trapezius, showed significantly greater sEMG activity (P = 0.0001; P = 0.0001; for left cervical, P = 0.03; for right cervical, P = 0.0001; P = 0.006 and P = 0.007 muscles, respectively) compared with the control group. This decreased over the remaining study period, such that after treatment, sEMG activity revealed no statistically significant difference when compared with the control group. During MVC at T0, paired masseter and anterior and posterior temporalis muscles showed significantly lower sEMG activity (P = 0.03; P = 0.005 and P = 0.04, respectively) compared with the control group. In contrast, at T1 sEMG activity significantly increased (P = 0.02; P = 0.004 and P = 0.04, respectively), but no difference was observed in relation to the control group. Splint therapy in subjects with internal disk derangement seems to affect sEMG activity of the masticatory, neck, and trunk

The Psychological Status of Patients with Acute Mandibular Injury

Directory of Open Access Journals (Sweden)

A. N. Pudov

2012-01-01

Full Text Available Objective: to define the specific features of the psychological status of patients with acute mandibular injury, to compare a psychological reaction to injury in different age groups and in persons with signs of alcohol addiction. Subjects and methods. The study enrolled 37 patients of both sexes over 15 years of age. The patients were distributed by age and chronic alcohol intoxication. Psychological parameters were determined using personality questionnaires: Spielberg-Hanin, Zung, GHQ-28, and Wein ones. Results. The patients with mandibular injury were found to have higher levels of situational and personality anxiety. A state of depression as a response to acute mandibular injury of reactive genesis was found in 29.8% of cases. Autonomic dysfunction occurred in 62.2% of the patients with mandibular fractures. Occult pathopsychological states were detected in 35.1% of the study group patients. Conclusion. The main found peculiarities of the psychological status of the patients with acute mandibular injury were high anxiety and the considerable incidence of autonomic dysfunction syndrome. There were no great age differences in psychological status and the direction of reactions. The patients with chronic alcohol intoxication more frequently developed a depressive state, but the autonomic dysfunction syndrome was just less often encountered and pathopsychological states were less frequently found. Key words: acute low anxiety depression alcohol abuse, psychological status.

Mandibular incisive canal in relation to periapical surgery

Directory of Open Access Journals (Sweden)

Kani Bilginaylar

2016-01-01

Full Text Available The aim of the present paper is to emphasize the importance of the mandibular interforaminal neurovascular bundle with a case and make a warning to dentists and surgeons during oral and maxillofacial surgeries, such as implant replacement, bone harvesting, genioplasty, open reduction of a mandibular fracture, and cyst enucleations at this region. In this paper, we present a 58-year-old male who referred with pain and a tingling sensation on the left lower lip. After radiographical, extraoral and intraoral examinations, findings indicated the lesion to be a cyst which was related with a periapical lesion of the canine tooth and extracted socket of first premolar tooth. After removal of a cyst, the mandibular incisive nerve was documented which was in relation to cyst cavity.

Complex aesthetic treatment on anterior maxillary teeth with malposition

Directory of Open Access Journals (Sweden)

Febriastuti Febriastuti

2008-12-01

Full Text Available Background: Complex aesthetic treatment on anterior teeth involves more than one caries tooth with malformed shape and malposition. Purpose: The purpose of this paper is to find the alternative treatment for anterior maxillary teeth with malposition. Case: In this case, a 25 year-old man with a peg shaped teeth and caries on several teeth and malposition can be treated with complex aesthetic treatment. Case management: Endodontic pulpectomy treatment on anterior maxillary teeth and post construction with splint porcelain fused to metal crowns on 11, 12, and 21, 22 to correct the shape and position into normal position. Conclusion: Malformed and malpositioned teeth with caries can be treated with complex aesthetic treatment.

Mandibular kinematics and masticatory muscles EMG in patients with short lasting TMD of mild-moderate severity.

Science.gov (United States)

De Felício, Cláudia Maria; Mapelli, Andrea; Sidequersky, Fernanda Vincia; Tartaglia, Gianluca M; Sforza, Chiarella

2013-06-01

Mandibular kinematic and standardized surface electromyography (sEMG) characteristics of masticatory muscles of subjects with short lasting TMD of mild-moderate severity were examined. Volunteers were submitted to clinical examination and questionnaire of severity. Ten subjects with TMD (age 27.3years, SD 7.8) and 10 control subjects without TMD, matched by age, were selected. Mandibular movements were recorded during free maximum mouth opening and closing (O-C) and unilateral, left and right, gum chewing. sEMG of the masseter and temporal muscles was performed during maximum teeth clenching either on cotton rolls or in intercuspal position, and during gum chewing. sEMG indices were obtained. Subjects with TMD, relative to control subjects, had lower relative mandibular rotation at the end of mouth opening, larger mean number of intersection between interincisal O-C paths during mastication and smaller asymmetry between working and balancing side, with participation beyond the expected of the contralateral muscles (Pkinematic parameters and the EMG indices of the static test, although some changes in the mastication were observed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Evaluation of dental age and associated developmental anomalies in subjects with impacted mandibular canines.

Science.gov (United States)

Jain, Shikha; Shetty, K Sadashiva; Jain, Shweta; Jain, Sachin; Prakash, A T; Agrawal, Mamta

2015-07-01

To assess the null hypothesis that there is no difference in the rate of dental development and the occurrence of selected developmental anomalies related to shape, number, structure, and position of teeth between subjects with impacted mandibular canines and those with normally erupted canines. Pretreatment records of 42 subjects diagnosed with mandibular canines impaction (impaction group: IG) were compared with those of 84 subjects serving as a control reference sample (control group: CG). Independent t-tests were used to compare mean dental ages between the groups. Intergroup differences in distribution of subjects based on the rate of dental development and occurrence of selected dental anomalies were assessed using χ(2) tests. Odds of late, normal, and early developers and various categories of developmental anomalies between the IG and the CG were evaluated in terms of odds ratios. Mean dental age for the IG was lower than that for the CG in general. Specifically, this was true for girls (P dental development and occurrence of positional anomalies also reached statistical significance (P anomalies compared with controls (odds ratios 3.00 and 2.82, respectively; P dental development compared with the female orthodontic patients. Increased frequency of positional developmental anomalies was also remarkable in the IG.

Regenerative approach to bilateral rostral mandibular reconstruction in a case series of dogs

Directory of Open Access Journals (Sweden)

Boaz eArzi

2015-03-01

Full Text Available Extensive rostral mandibulectomy in dogs typically results in instability of the mandibles that may lead to malocclusion, difficulty in eating and drinking, food prehension, and pain of the temporomandibular joint. Large rostral mandibular defects are challenging to reconstruct due to the complex geometry of this region. In order to restore mandibular continuity and stability following extensive rostral mandibulectomy, we developed a surgical technique using a combination of intraoral and extraoral approaches, a locking titanium plate and a compression resistant matrix (CRM infused with rhBMP-2. Furthermore, surgical planning that consisted of computed tomographic (CT scanning and 3D model printing were utilized. We describe a regenerative surgical technique for immediate or delayed reconstruction of critical-size rostral mandibular defects in 5 dogs. Three dogs had healed with intact gingival covering over the mandibular defect and had immediate return to normal function and occlusion. Two dogs had the complication of focal plate exposure and dehiscence, which was corrected with mucosal flaps and suturing; these dogs have since healed with intact gingival covering over the mandibular defect. Mineralized tissue formation was palpated clinically within 2 weeks and solid bone formation within 3 months. Computed tomography findings at 6 months postoperatively demonstrated that the newly regenerated mandibular bone had increased in mineral volume with evidence of integration between the native bone, new bone and CRM compared to the immediate postoperative CT. We conclude that rostral mandibular reconstruction using a regenerative approach provides an excellent solution for restoring mandibular continuity and preventing mandibular instability in dogs.

Immunohistochemical localization of anterior pituitary hormones in S-100 protein-positive cells in the rat pituitary gland.

Science.gov (United States)

Kikuchi, Motoshi; Yatabe, Megumi; Tando, Yukiko; Yashiro, Takashi

2011-09-01

In the anterior and intermediate lobes of the rat pituitary gland, non-hormone-producing cells that express S-100 protein coexist with various types of hormone-producing cells and are believed to function as phagocytes, supporting and paracrine-controlling cells of hormone-producing cells and stem cells, among other functions; however, their cytological characteristics are not yet fully understood. Using a transgenic rat that expresses green fluorescent protein under the promoter of the S100β protein gene, we immunohistochemically detected expression of the luteinizing hormone, thyroid-stimulating hormone, prolactin, growth hormone and proopiomelanocortin by S-100 protein-positive cells located between clusters of hormone-producing cells in the intermediate lobe. These findings lend support to the hypothesis that S-100 protein-positive cells are capable of differentiating into hormone-producing cells in the adult rat pituitary gland.

Compensatory orthodontic treatment of skeletal Class III malocclusion with anterior crossbite

Directory of Open Access Journals (Sweden)

José Valladares Neto

2014-01-01

Full Text Available INTRODUCTION: This case report describes the orthodontic treatment of an adult patient with skeletal Class III malocclusion and anterior crossbite. A short cranial base led to difficulties in establishing a cephalometric diagnosis. The patient's main complaint comprised esthetics of his smile and difficulties in mastication. METHODS: The patient did not have the maxillary first premolars and refused orthognathic surgery. Therefore, the treatment chosen was orthodontic camouflage and extraction of mandibular first premolars. For maxillary retraction, the vertical dimension was temporarily increased to avoid obstacles to orthodontic movement. RESULTS: At the end of the treatment, ideal overjet and overbite were achieved. CONCLUSION: Examination eight years after orthodontic treatment revealed adequate clinical stability. This case report was submitted to the Brazilian Board of Orthodontics and Facial Orthopedics (BBO as part of the requirements to become a BBO diplomate.

Mandibular osteosynthesis in a Boa constrictor snake

Directory of Open Access Journals (Sweden)

Jorge Luiz Costa Castro

2014-02-01

Full Text Available Nowadays are observed an increase in the finding of certain wild animals in urban areas, due to environmental changes caused by deforestation and economic use of natural areas. It causes disappearance of usual prey and forces these animals, including snakes, to migrate to urban areas, becoming vulnerable to injuries caused by aggressions, car accidents and capture. Mandibular and maxillar fractures are common in many animal species, representing about 3-6% of all bone fractures in dogs and cats. Mandibular trauma usually occurs as a result of fights, car accidents and improper handling and/or restraint, and fractures can be closed or open, clean or contaminated. The jaw is a flat bone with differences from the long bones that should be taken into consideration for successful treatment, being minimal muscle coverage and need to maintain occlusion factors that influence the definition of the best ostheosynthesis method. The methods of stabilization include using intramedullary pins, wires, external skeletal fixation, bone plate, and acrylic resin. Conventional bone plates are efficient but related to some complications, such as the necessity of muscular elevation and high risk of injuries to mandibular structures. This article describes the successful results of the application of plate and screws in the ostheosynthesis of a mandibular fracture in a female Boa constrictor snake with weight of 8.0 kg and length of 1.80 m, at the RIOZOO Foundation (Rio de Janeiro, RJ, Brazil.

Mandibular second molar with 3 mesial canals and a radix paramolaris

Directory of Open Access Journals (Sweden)

N Ragavendran

2014-01-01

Full Text Available Mandibular first molar commonly has two roots, the mesial and the distal root. Surprisingly in some mandibular first molar has an unusual extra third root in between mesial and distal root. This extra root is the most commonly seen in lingual side and is called as radix entomolaris. If this extra root is seen on the buccal side, it is termed as radix paramolaris (RP, which is a very rare phenomenon. Recently, various case report studies has shown the presence of third canal in the mesial and distal roots of mandibular molars. They are named as middle mesial and middle distal canal, respectively. Here, we present a case report of mandibular second molar showing three canals in the mesial root and a RP.

Functional adaptation of the masticatory system to implant-supported mandibular overdentures.

Science.gov (United States)

Giannakopoulos, Nikolaos Nikitas; Corteville, Frédéric; Kappel, Stefanie; Rammelsberg, Peter; Schindler, Hans Jürgen; Eberhard, Lydia

2017-05-01

The purpose of this study was to investigate the adaptation behavior of the stomatognathic system after immediate loading (24 to 72 h after surgery) of two implants supporting mandibular overdentures, assessed on insertion and three months later. The study hypothesis was that insertion of the overdentures would significantly change masticatory performance and muscle activity at both times. Thirty subjects (nine female, mean age 69.64 ± 11.81 years; 21 male, mean age 68.67 ± 7.41 years) who participated in a randomized clinical trial were included in the study. Each patient was examined three times: (i) at baseline, after already having worn new dentures for three months (T1); (ii) immediately after insertion of the overdentures on the implants (T2); and (iii) after an adaptation period of three months (T3). Examination comprised assessment of masticatory performance with artificial test food (Optocal), and simultaneous bilateral surface EMG recording of the masseter and anterior temporalis muscles. Particle-size distribution (representative value X 50 ), maximum muscle contraction (MVC), and total muscle work (TMW; area under the curve) were compared by use of repeated-measures analysis of variance (ANOVA). At T3, all measured variables (i.e., masticatory performance and muscle activity) were significantly different from those at T1. At T2, no significant changes were observed. The study hypothesis had to be rejected for T2 but accepted for T3. Functional rehabilitation (in terms of masticatory performance and masticatory muscle activity) does not occur immediately after immediate loading of two implants with mandibular overdentures, but requires a significant time for functional improvement. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Mandibular ramus: A predictor for sex determination - A digital radiographic study

Directory of Open Access Journals (Sweden)

Kotya Naik Maloth

2017-01-01

Full Text Available Aim: To evaluate mandibular ramus linear measurements on digital panoramic radiographs and to assess the usefulness of mandibular ramus in sex determination. Material and Methods: A retrospective study was conducted on 100 patients (50 males and 50 females using digital panoramic radiographs of Khammam population with age ranging from 20 to 50 years. Standard digital panoramic radiographs were taken without any errors by Sirona, ORTHOPHOS XG 5 machine. The following five mandibular linear measurements were performed in cm such as upper ramus breadth, lower ramus breadth, condylar ramus height, projective ramus height, and coronoid ramus height. The obtained data were analyzed with the software SPSS 13.0 for statistical analysis using discriminate methods. Results: In the present study, all the linear measurements of mandibular ramus on digital panoramic radiographs showed a statistically significant difference between the genders. Conclusion: We conclude that the use of mandibular ramus is recommended as an aid for sex determination in forensic science due to their unique feature of sexual dimorphism.

Clinical importance of median mandibular flexure in oral rehabilitation: a review.

Science.gov (United States)

Sivaraman, K; Chopra, A; Venkatesh, S B

2016-03-01

The mandible has a property to flex inwards around the mandibular symphysis with change in shape and decrease in mandibular arch width during opening and protrusion of the mandible. The mandibular deformation may range from a few micrometres to more than 1 mm. The movement occurs because of the contraction of lateral pterygoid muscles that pulls mandibular condyles medially and causes a sagittal movement of the posterior segments. This movement of mandible can have a profound influence on prognosis and treatment outcome for various restorative, endodontics, fixed, removable and implant-related prosthesis. The review unfolds the causes, importance and clinical implications of median mandibular flexure in oral rehabilitation. This review also highlights the appropriate preventive measures and techniques that should be adopted by clinicians to minimise the effect of flexural movement of the jaw during oral rehabilitation. This would not only help clinicians to achieve a good prosthesis with accurate fit and longevity but also maintain the health of the surrounding periodontal or periimplant gingival tissues and bone. © 2015 John Wiley & Sons Ltd.

[Congenital malformations of the temporo-mandibular joint and the mandibular ramus: Grafting vs distraction osteogenesis].

Science.gov (United States)

Gallucci, A; Graillon, N; Foletti, J M; Chossegros, C; Cheynet, F

2016-09-01

Congenital deformities of the mandibular ramus and of the temporo-mandibular joint are treated by surgery since the early 20th century. However, morphological and functional results are often disappointing, accounting for iterative operations. Today, a clear consensus concerning the type of intervention to be proposed, and at what age it should be carried out does not yet exist. For mild cases, "conventional" orthognathic or osteogenic distraction procedures seem to work well, especially if they are carried out at the end of growth. In severe cases, it is often necessary to proceed in several surgical steps, usually starting with a chondrocostal graft, especially when interceptive surgery, performed before the end of growth, is preferred in order to improve the patient's quality of life. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Peripheral Osteoma of the Mandibular Notch: Report of a Case

International Nuclear Information System (INIS)

Iwai, Toshinori; Izumi, Toshiharu; Baba, Junichi; Maegawa, Jiro; Mitsudo, Kenji; Tohnai, Iwai

2013-01-01

Osteoma is a benign, slow-growing osteogenic tumor that sometimes arises from the craniomaxillofacial region, such as the sinus, temporal or jaw bones. Osteoma consists of compact or cancellous bone that may be peripheral, central or extraskeletal type. Peripheral osteoma arises from the periosteum and is commonly a unilateral, pedunculated mushroom-like mass. Peripheral osteoma of the mandible is relatively uncommon, and peripheral osteoma of the mandibular notch is extremely rare, although many cases arise from the mandibular body, angle, condyle, or coronoid process. We report here an unusual peripheral osteoma of the mandibular notch in a 78-year-old nonsyndromic female

[SCREW-BASED INTERMAXILLARY TRACTION COMBINED WITH OCCLUSAL SPLINT FOR TREATMENT OF PEDIATRIC MANDIBULAR CONDYLAR FRACTURE].

Science.gov (United States)

Wu, Yang; Long, Xing; Deng, Mohong; Cai, Hengxing; Meng, Qinggong; Li, Bo

2015-04-01

To evaluate the effectiveness of the screw-based intermaxillary traction combined with occlusal splint in the treatment of pediatric mandibular condylar fracture. Between June 2005 and December 2013, 35 pediatric patients with 49 mandibular condylar fractures were treated, and the clinical data were retrospectively reviewed. There were 25 boys and 10 girls, aged 3-13 years (mean, 7.3 years). The injury causes included falling (18 cases), traffic accident (14 cases), and violence (3 cases). The time between injury and treatment was 2-30 days (mean, 6.8 days). Restricted mouth opening was observed, and the maximal mouth opening was (22.74 +/- 7.22) mm except 3 patients who were too young to measure. Condylar fractures were located at the left (12 cases), at the right (9 cases), at bilateral (14 cases) based on the sites; and fractures were classified as intracapsular (35 fractures), neck (10 fractures), and subcondylar (4 fractures) based on the fracture line. Four self-drilling titanium screws were inserted into the alveolar bone of both maxilla and mandible. After screw inserting, an occlusal splint with a fulcrum was used on the affected side and elastic band was put to perform anterior intermaxillary traction. After 1 month, the screws and splint were removed. Follow-up examinations were carried out on schedule. All the patients were followed up from 6 months to 8 years and 10 months (median, 71 months). No screw-related complication occurred in the others except one case of screw loosening. The postoperative maximal mouth opening was (38.82 +/- 2.02) nim. Mild joint noise was found in 4 cases and opening deviation occurred in 6 cases. Radiographic results demonstrated complete condyle remodeling was achieved in 24 cases (32 fractures), and moderate remodeling in 11 cases (17 fractures) at last follow-up. The screw-based intermaxillary traction combined with occlusal splint might be an effective method for pediatric mandibular condylar fracture. The screw

Maxillary palatal ramp prosthesis: A prosthodontic solution to manage mandibular deviation following surgery

Directory of Open Access Journals (Sweden)

Sampa Ray (Bhattacharya

2015-01-01

Full Text Available Mandibular resection following surgical treatment for neoplastic lesions of the oral cavity leads to numerous complications including altered mandibular movements, disfigurement, difficult in swallowing, impaired speech and articulation, and deviation of the mandible towards the resected site. Various prosthetic methods are employed to reduce or minimize mandibular deviation and improve and restore the lost functions and esthetic, like maxillomandibular fixation, implant supported prosthesis, removable mandibular guide flange prosthesis, and palatal based guidance restoration. This clinical report describes the rehabilitation of a patient following segmental mandibulectomy using palatal ramp prosthesis.

[Trigeminal motor paralysis and dislocation of the temporo-mandibular joints].

Science.gov (United States)

Ohkawa, S; Yoshida, T; Ohsumi, Y; Tabuchi, M

1996-07-01

A 64-year-old woman with diabetes mellitus was admitted to our hospital with left hemiparesis of sudden onset. A brain MRI demonstrated a cerebral infarction in the ventral part of the right lower pons. When left hemiparesis worsened, she had dislocation of the temporo-mandibular joints repeatedly. Then, her lower jaw deviated to the right when she opened her mouth. Also, there was decreased contraction of the right masseter when she clenched her teeth. These findings suggest that there was trigeminal motor paralysis on the right side resulting from involvement of the intrapontine trigeminal motor nerve. She has no history of dislocation of the temporo-mandibular joints. An X-ray film showed that the temporo-mandibular joints were intact. Thus, it is possible that deviation of the lower jaw was the cause of this dislocation. We suspect that dislocation of the temporo-mandibular joints may occur as a complication of unilateral trigeminal motor paralysis. This has not been reported to our knowledge.

The Effectiveness of a Functional Knee Brace on Joint-Position Sense in Anterior Cruciate Ligament-Reconstructed Individuals.

Science.gov (United States)

Sugimoto, Dai; LeBlanc, Jessica C; Wooley, Sarah E; Micheli, Lyle J; Kramer, Dennis E

2016-05-01

It is estimated that approximately 350,000 individuals undergo anterior cruciate ligament (ACL) reconstruction surgery in each year in the US. Although ACL-reconstruction surgery and postoperative rehabilitation are successfully completed, deficits in postural control remain prevalent in ACL-reconstructed individuals. In order to assist the lack of balance ability and reduce the risk of retear of the reconstructed ACL, physicians often provide a functional knee brace on the patients' return to physical activity. However, it is not known whether use of the functional knee brace enhances knee-joint position sense in individuals with ACL reconstruction. Thus, the effect of a functional knee brace on knee-joint position sense in an ACL-reconstructed population needs be critically appraised. After systematically review of previously published literature, 3 studies that investigated the effect of a functional knee brace in ACL-reconstructed individuals using joint-position-sense measures were found. They were rated as level 2b evidence in the Centre of Evidence Based Medicine Level of Evidence chart. Synthesis of the reviewed studies indicated inconsistent evidence of a functional knee brace on joint-position improvement after ACL reconstruction. More research is needed to provide sufficient evidence on the effect of a functional knee brace on joint-position sense after ACL reconstruction. Future studies need to measure joint-position sense in closed-kinetic-chain fashion since ACL injury usually occurs under weight-bearing conditions.

[Bruxism, temporo-mandibular dysfunction and botulinum toxin].

Science.gov (United States)

Chikhani, L; Dichamp, J

2003-07-01

Tooth grinding and tooth clenching are unvoluntary mainly nocturnal habits that result in an hypertrophy of masseter and temporalis muscles with an unbalance between opening and closing muscles of the jaw and lead to an alteration of mandibular condyles movements and to hyper pressure in the temporo-mandibular joints (TMJ) which can generate severe pain. Intra muscular injections of botulinum toxin permit to restablish the balance between closing and opening muscles, to relieve pain, to treat masseteric hypertrophy with improvement of face outline and to recover a normal cinetic of temporo-mandibular joints. Moreover, botulinum toxin injections permit to quit habits of tooth grinding and clenching and one single session of injections is curative for 2/3 of the patients. There are no side effects apart from slight diffusion to superficial muscles of the face resulting in a "fixed" smile for about 6 to 8 weeks. So injections of botulinum toxin in masseter and temporalis muscles are an efficient treatment of bruxism and TMJ dysfunction, cheap with no lasting side effect.

Mandibular and hyoid muscles of Galeomorph sharks (Chondrichthyes: Elasmobranchii), with remarks on their phylogenetic intrarelationships.

Science.gov (United States)

Soares, Mateus C; de Carvalho, Marcelo R

2013-10-01

The superorder Galeomorph comprises the orders Heterodontiformes, Orectolobiformes, Lamniformes, and Carcharhiniformes. Recent morphological and molecular support that it is a monophyletic taxon. The phyletic relationship within the Galeomorphi are also well resolved. However, only few morphological characters of the mandibular and hyoid muscles have been employed, and a detailed description of these muscles and their variations may contribute new interpretations of homology and to the discussion of different hypothesis of intrarelationships. This paper provides a detailed description of mandibular and hyoid arch muscles in galeomorph sharks, within a comparative elasmobranch framework, with the objective to discuss putative homologies that may elucidate our understanding of galeomorph evolution. Twenty-eight galeomorph species were dissected, described, illustrated and compared with other elasmobranchs and with data from the literature. The Galeomorphi are supported as monophyletic by presenting the m. levator labii superioris attached directly to the neurocranium, different from the attachment through a tendon in basal squalomorphs. Heterodontiformes and Orectolobiformes share particular variations in the position and insertion of the m. levator labii superioris and the presence of a well-defined m. levator hyomandibulae. Lamniformes and Carcharhiniformes show similar patterns in the position and attachment of the m. levator labii superioris, subdivision of the m. adductor mandibulae, and the presence of an almost indivisible m. levator hyomandibulae and m. constrictor hyoideus dorsalis, similar to the condition, albeit independently, in basal squalomorphs. No specific mandibular or hyoid arch muscle character was found to support the clade composed of Orectolobiformes, Lamniformes, and Carcharhiniformes, as advocated by recent phylogenetic analyses. Copyright © 2013 Wiley Periodicals, Inc.

Cementoblastoma Relating to Right Mandibular Second Primary Molar

Directory of Open Access Journals (Sweden)

Sivakumar Nuvvula

2016-01-01

Full Text Available Cementoblastoma is a benign lesion of the odontogenic ectomesenchymal origin. It rarely occurs in primary dentition. This report describes a case of a cementoblastoma relating to the right mandibular second primary molar in a 7-year-old girl. Her panoramic radiograph revealed a well-defined radiopaque lesion with a radiolucent border extending from the distal surface of the mandibular right first primary molar to the distal surface of mandibular second primary molar. The tumor was attached to the mesial root of primary second molar and was excised along with the teeth involved and sent for histopathological evaluation, which showed irregular trabeculae of mineralized tissue interspersed with fibrovascular connective tissue, trabeculae of mineralized tissue with prominent reversal lines, and peripheral rimming of the mineralized tissue with blast cells. On a six-month follow-up, there has been no recurrence of the lesion.

[Inferior hemiarthroplasty of the temporo-mandibular joint with articulated condylar prosthesis type Stryker].

Science.gov (United States)

Bucur, A; Dincă, O; Totan, C; Ghită, V

2007-01-01

The optimal reconstruction of the mandible and of the temporo-mandibular joint after mandibular hemi-resection with disarticulation is still controversial in literature. This paperwork presents our experience on four cases in the reconstruction of the mandible together with the inferior arthroplasty of the temporo-mandibular joint, after the resection of extended benign tumors of the mandible, based on fibular free vascularized grafts having attached a Stryker titanium condylar prosthesis reconstructing the inferior segment of the temporo-mandibular joint. Our results for the this technique were excellent, with a functional rehabilitation very close to normal. After reviewing the various techniques and their arguments in literature, with accent on the TMJ reconstruction, we consider this method to be optimal for the reconstruction of mandibular defects in patients with neoplastic conditions.

A comparative study of accuracy of linear measurements using cone beam and multi-slice computed tomographies for evaluation of mandibular canal location in dry mandibles.

Science.gov (United States)

Naser, Asieh Zamani; Mehr, Bahar Behdad

2013-01-01

Cross- sectional tomograms have been used for optimal pre-operative planning of dental implant placement. The aim of the present study was to assess the accuracy of Cone Beam Computed Tomography (CBCT) measurements of specific distances around the mandibular canal by comparing them to those obtained from Multi-Slice Computed Tomography (MSCT) images. Ten hemi-mandible specimens were examined using CBCT and MSCT. Before imaging, wires were placed at 7 locations between the anterior margin of the third molar and the anterior margin of the second premolar as reference points. Following distances were measured by two observers on each cross-sectional CBCT and MSCT image: Mandibular Width (W), Length (L), Upper Distance (UD), Lower Distance (LD), Buccal Distance (BD), and Lingual Distance (LID). The obtained data were evaluated using SPSS software, applying paired t-test and intra-class correlation coefficient (ICC). There was a significant difference between the values obtained by MSCT and CBCT measurement for all areas such as H, W, UD, LD, BD, and LID, (P < 0.001), with a difference less than 1 mm. The ICC for all distances by both techniques, measured by a single observer with a one week interval and between 2 observers was 99% and 98%, respectively. Comparing the obtained data of both techniques indicates that the difference between two techniques is 2.17% relative to MSCT. The results of this study showed that there is significant difference between measurements obtained by CBCT and MSCT. However, the difference is not clinically significant.

Foramen magnum position in bipedal mammals.

Science.gov (United States)

Russo, Gabrielle A; Kirk, E Christopher

2013-11-01

The anterior position of the human foramen magnum is often explained as an adaptation for maintaining balance of the head atop the cervical vertebral column during bipedalism and the assumption of orthograde trunk postures. Accordingly, the relative placement of the foramen magnum on the basicranium has been used to infer bipedal locomotion and hominin status for a number of Mio-Pliocene fossil taxa. Nonetheless, previous studies have struggled to validate the functional link between foramen magnum position and bipedal locomotion. Here, we test the hypothesis that an anteriorly positioned foramen magnum is related to bipedalism through a comparison of basicranial anatomy between bipeds and quadrupeds from three mammalian clades: marsupials, rodents and primates. Additionally, we examine whether strepsirrhine primates that habitually assume orthograde trunk postures exhibit more anteriorly positioned foramina magna compared with non-orthograde strepsirrhines. Our comparative data reveal that bipedal marsupials and rodents have foramina magna that are more anteriorly located than those of quadrupedal close relatives. The foramen magnum is also situated more anteriorly in orthograde strepsirrhines than in pronograde or antipronograde strepsirrhines. Among the primates sampled, humans exhibit the most anteriorly positioned foramina magna. The results of this analysis support the utility of foramen magnum position as an indicator of bipedal locomotion in fossil hominins. Copyright © 2013 Elsevier Ltd. All rights reserved.

Study of pulp chamber morphology of primary mandibular molars using spiral computed tomography.

Science.gov (United States)

Selvakumar, Haridoss; Kavitha, Swaminathan; Vijayakumar, Rajendran; Eapen, Thomas; Bharathan, Rajendran

2014-11-01

The purpose of this study was to evaluate the pulp chamber morphology in primary mandibular molars using spiral computed tomography (SCT). Sixty extracted primary mandibular molars were scanned using SCT for the (i) distance between the central fissure to furcation, (ii) distance between the central fissure to the floor of the pulp chamber, (iii) height of the pulp chamber (roof-floor), (iv) distance between the floor of the pulp chamber to the furcation. The mean and standard deviation was analyzed using statistical package for the social sciences (SPSS) program. The results of this study show that the average mean distance from the central fissure to the floor of the pulp chamber is 5.07 mm in first mandibular primary molar and 5.54 mm in second mandibular primary molar. It can be concluded that the greatest depth to which a bur can go during access opening without perforating the furcation in first primary mandibular molar is 5.07 mm and 5.54 mm in second primary mandibular molar.

Influence of mastication and edentulism on mandibular bone density.

Science.gov (United States)

Chou, Hsuan-Yu; Satpute, Devesh; Müftü, Ali; Mukundan, Srinivasan; Müftü, Sinan

2015-01-01

The aim of this study was to demonstrate that external loading due to daily activities, including mastication, speech and involuntary open-close cycles of the jaw contributes to the internal architecture of the mandible. A bone remodelling algorithm that regulates the bone density as a function of stress and loading cycles is incorporated into finite element analysis. A three-dimensional computational model is constructed on the basis of computerised tomography (CT) images of a human mandible. Masticatory muscle activation involved during clenching is modelled by static analysis using linear optimisation. Other loading conditions are approximated by imposing mandibular flexure. The simulations predict that mandibular bone density distribution results in a tubular structure similar to what is observed in the CT images. Such bone architecture is known to provide the bone optimum strength to resist bending and torsion during mastication while reducing the bone mass. The remodelling algorithm is used to simulate the influence of edentulism on mandibular bone loss. It is shown that depending on the location and number of missing teeth, up to one-third of the mandibular bone mass can be lost due to lack of adequate mechanical stimulation.

Changes of hyoid bone position following treatment of class II div1 malocclusion with Farmand functional appliance

Directory of Open Access Journals (Sweden)

Yassaei S

2007-01-01

Full Text Available Background and Aim: Unlike other bones of the head and neck, hyoid bone has no bony articulations. It is connected to mandible, cranium and pharynx through muscles and ligaments. During treatment with functional appliance in patients with class II div1 malocclusion, mandible is positioned in inferior and anterior direction. Regarding the relation between hyoid and mandibular bone, alterations of hyoid bone position can be a result of functional appliance therapy. The aim of this study was to evaluate the changes of hyoid bone position following treatment with Farmand functional appliance in patients with class II div 1 malocclusion. Materials and Methods: In this before-after clinical trial, 28 patients with class II div 1 malocclusion which were under treatment with Farmand functional appliance for 11 months were selected. Facial growth in vertical, normal or horizontal direction was determined by cephalometric measurement. Data were analyzed with Paired-t test to compare the differences of mean values pre and post treatment. Variance analysis was used to compare the three growth patterns. P<0.05 was considered as the limit of significance. Results: Hyoid bone shifted significantly forward in horizontal dimension (P<0.01 and non-significantly upward in vertical dimension. There was no significant difference among the three studied groups with respect to hyoid bone position alterations in horizontal dimension but significant difference was observed between horizontal and vertical growth pattern in vertical dimension (P<0.05. There was significant correlation between decrease of ANB angle and forward movement of hyoid bone. Conclusion: Based on the results of this study, treatment with Farmand functional appliance (Fa II leads to significant alterations in the position and anterior displacement of the hyoid bone.

Mandibular condylar morphology for bruxers with different grinding patterns.

Science.gov (United States)

Tao, Jianxiang; Wu, Junhua; Zhang, Xuying

2016-07-01

The purpose of this study was to investigate the mandibular condylar morphology for bruxers with different grinding patterns. Condylar sectional morphology and condylar position of 30 subjects were determined by two viewers using cone beam computed tomography (CBCT) image data sets. The grinding patterns during sleep bruxism (SB) were determined objectively using a Brux-checker device.Chi-square tests were used for statistical analysis for the condylar morphology type between different tooth grinding patterns. Spearman's rank correlation coefficient was used for correlation analysis between condylar position and the canine guidance area during SB. Theincidence of condylarmorphologicaldivergence from idealwas35%.There isa significant difference in distribution of condylar morphology type between the group grinding (GG) and GG combined with mediotrusive side grinding (MG) (p < 0.05). There was no significant correlation between condylar position and canine guidance area during bruxism. MG during SB is associated with condylar morphology that is considered not to be ideal.

Quantitative analysis of the TMJ movement with a new mandibular movement tracking and simulation system

International Nuclear Information System (INIS)

Kim, Dae Seung; Hwang, Soon Jung; Choi, Soon Chul; Lee, Sam Sun; Heo, Min Suk; Heo, Kyung Hoe; Yi, Won Jin

2008-01-01

The purpose of this study was to develop a system for the measurement and simulation of the TMJ movement and to analyze the mandibular movement quantitatively. We devised patient-specific splints and a registration body for the TMJ movement tracking. The mandibular movements of the 12 subjects with facial deformity and 3 controls were obtained by using an optical tracking system and the patient-specific splints. The mandibular part was manually segmented from the CT volume data of a patient. Three-dimensional surface models of the maxilla and the mandible were constructed using the segmented data. The continuous movement of the mandible with respect to the maxilla could be simulated by applying the recorded positions sequentially. Trajectories of the selected reference points were calculated during simulation and analyzed. The selected points were the most superior point of bilateral condyle, lower incisor point, and pogonion. There were significant differences (P<0.05) between control group and pre-surgical group in the maximum displacement of left superior condyle, lower incisor, and pogonion in vertical direction. Differences in the maximum lengths of the right and the left condyle were 0.59 ± 0.30 mm in pre-surgical group and 2.69 ± 2.63 mm in control group, which showed a significant difference (P<0.005). The maximum of differences between lengths of the right and the left calculated during one cycle also showed a significant difference between two groups (P<0.05). Significant differences in mandibular movements between the groups implies that facial deformity have an effect on the movement asymmetry of the mandible.

Serial position learning effects in patients with aneurysms of the anterior communicating artery.

Science.gov (United States)

Stefanova, Elka; Kostic, Vladimir S; Ziropadja, Ljubomir; Markovic, Milan; Ocic, Gordana

2002-08-01

Ruptured and repaired Anterior Communicating Artery (ACoA) aneurysm can result in devastating impairments involving memory, executive function, confabulation, and personality changes. This study tested serial position learning effects (SPEs) in patients following repaired and ruptured ACoA aneurysm, using results on the Rey Auditory Verbal Learning Test (RAVLT). Thirty patients with ruptured aneurysms of the ACoA and 31 matched controls were included in the study. The primacy-recency effects were maintained during five learning trials in ACoA group, albeit at an overall lower level than in the controls. There was no difference in primacy-recency relation across five learning trials in ACoA group. On the delayed recall trial the patient group demonstrated neither a primacy, nor a recency phenomenon, reflecting a lack of recall of any parts of the word list. This kind of primacy-recency profile across learning trials in ACoA group has no similarity with SPE results in frontal lesion groups, or with SPE distributions in other amnesic disorders, despite the fact that memory and executive deficits were evident in our ACoA group.

Prevalence of C-shaped canals in mandibular second and third molars in a central India population: A cone beam computed tomography analysis.

Science.gov (United States)

Wadhwani, Shefali; Singh, Mahesh Pratap; Agarwal, Manish; Somasundaram, Pavithra; Rawtiya, Manjusha; Wadhwani, P K

2017-01-01

To evaluate the prevalence of C-shaped root canals in mandibular molars using cone beam computed tomography (CBCT) in a subpopulation of Central India. CBCT scans of patients from diagnostic imaging center were selected in accordance with the criteria given by Fan et al . (2004) for C-shaped canals. A total of 238 CBCT scans fulfilled the inclusion criteria and thereby divided into two groups: Group 1: Images showing C-shaped canal configuration in mandibular second molars. Group 2: Images showing C-shaped canal configuration in mandibular third molars. The frequency and distribution of canals and their configuration along with the position of lingual/buccal grooves in the images were evaluated, and the data was analyzed. CBCT evaluation showed that 9.7% of second molars and 8% of third molars had C-shaped canals. A prominent buccal groove was seen in these teeth. The data showed a significant difference ( P = 0.038) for the presence of such anatomy on the right side for mandibular third molars. The study showed a significant prevalence of C-shaped canal configuration in the subpopulation studied.

Mandibular Two Mini Implants Overdenture Using Magnetic Attachments: A Case Report

Directory of Open Access Journals (Sweden)

Anna Miyayasu

2017-12-01

Full Text Available Many patients with an edentulous mandible struggle to use complete dentures. The instability of such dentures caused by the lack of retention, often causes discomfort, as well as functional and psychosocial problems, which can be signifcantly improved using implant overdentures with retentive attachments. This case report describes a successful case of a mandibular implant overdenture using two mini implants and magnetic attachments for an elderly edentulous patient. Case Report: A 62-year-old female with a thin mandibular bone ridge presented with complaints of pain caused by an unstable and unretentive complete mandibular denture. This patient received two mini implants (diameter: 2.6 mm; length: 12 mm with magnetic attachments. After three months, magnetic assemblies with magnetic attraction of 400 gf were incorporated into the intaglio surface of her mandibular overdenture. At 11 months, magnetic attraction was changed from 400 gf to 600 gf to provide a stronger magnetic force for improving the retention of this denture. Conclusion: Based on a two-year follow-up period, the mandibular two mini implants overdenture with magnetic attachments was successful in improving the patient’s general satisfaction with her dentures

Management of periodontally compromised mandibular molar with Hemisectioning: A case report

Directory of Open Access Journals (Sweden)

Bandu Napte

2014-01-01

Full Text Available Introduction: Hemisection involves sectioning of a periodontally involved mandibular molar so as to remove the involved root and save the remaining tooth. This procedure helps in saving a tooth which otherwise would have been deemed for extraction. Hemisection refers to removal or separation of root with its accompanying crown portion of two-rooted teeth, most commonly mandibular molars. Method: In this case report, an advanced Endo-Perio lesion on a left mandibular first molar was successfully treated by root-canal treatment and hemisection. This procedure helps preserve the tooth structure, alveolar bone and promote cost savings over other treatment options. Conclusion: Hemisection is a treatment option for saving a mandibular molar which is in advanced stage of periodontal disease of one root. Removal of the affected root will help in retaining the remaining tooth structure.

Evaluation of mandibular condyles in children with unilateral posterior crossbite.

Science.gov (United States)

Illipronti-Filho, Edson; Fantini, Solange Mongelli de; Chilvarquer, Israel

2015-01-01

The relationship of mandibular condyle dimensions and its association with unilateral posterior crossbite (UPXB) has been suggested in the literature. The purpose of this prospective study was to evaluate mandibular condyles on the left and right sides and between crossed and non-crossed sides in the sagittal and coronal planes, using cone-beam computed tomography (CBCT). Twenty CBCT images of 40 temporo mandibular joints (TMJs) in individuals in mixed dentition phase, which included 9 males (mean 7.9 years) and 11 females (mean 8.2 years), with unilateral posterior crossbite without premature contacts and functional mandibular shifts and with transverse maxillary deficiency. The criteria for sample exclusion included the presence of painful symptoms, facial trauma history, systemic diseases such as juvenile rheumatoid arthritis, mouth opening limitation (anomalies, and skeletal asymmetries that may result in TMJ disorders. Dimensional measurements of the condyles between the right and left sides and crossed and non-crossed sides in sagittal and coronal view were made. There was no significant difference between the measurements of the crossed and non-crossed sides in both sagittal and coronal view. These findings suggest that the presence of unilateral posterior crossbite in children with UPXB did not result in changes between the mandibular condyles in the right and left sides or between the crossed and non-crossed sides in the coronal or sagittal plane.

Nonnecrotizing anterior scleritis mimicking orbital inflammatory disease

Directory of Open Access Journals (Sweden)

Lynch MC

2013-08-01

Full Text Available Michelle Chen Lynch,1 Andrew B Mick21Optometry Clinic, Ocala West Veterans Affairs Specialty Clinic, Ocala, FL, USA; 2Eye Clinic, San Francisco VA Medical Center, San Francisco, CA, USABackground: Anterior scleritis is an uncommon form of ocular inflammation, often associated with coexisting autoimmune disease. With early recognition and aggressive systemic therapy, prognosis for resolution is good. The diagnosis of underlying autoimmune disease involves a multidisciplinary approach.Case report: A 42-year-old African American female presented to the Eye Clinic at the San Francisco Veteran Affairs Medical Center, with a tremendously painful left eye, worse on eye movement, with marked injection of conjunctiva. There was mild swelling of the upper eyelid. Visual acuity was unaffected, but there was a mild red cap desaturation. The posterior segment was unremarkable. The initial differential diagnoses included anterior scleritis and orbital inflammatory disease. Oral steroid treatment was initiated with rapid resolution over a few days. Orbital imaging was unremarkable, and extensive laboratory work-up was positive only for antinuclear antibodies. The patient was diagnosed with idiopathic diffuse, nonnecrotizing anterior scleritis and has been followed for over 5 years without recurrence. The rheumatology clinic monitors the patient closely, as suspicion remains for potential arthralgias including human leukocyte antigen-B27-associated arthritis, lupus-associated arthritis, seronegative rheumatoid arthritis, recurrent juvenile idiopathic arthritis, and scleroderma, based on her constitutional symptoms and clinical presentation, along with a positive anti-nuclear antibody lab result.Conclusion: Untreated anterior scleritis can progress to formation of cataracts, glaucoma, uveitis, corneal melting, and posterior segment disease with significant risk of vision loss. Patients with anterior scleritis must be aggressively treated with systemic anti

Maximum dislodging forces of mandibular implant-assisted removable partial dentures: in vitro assessment.

Science.gov (United States)

Gharehchahi, Jafar; Asadzadeh, Nafiseh; Mirmortazavi, Amirtaher; Shakeri, Mohammad Taghi

2013-10-01

The initial retention of implant-assisted removable partial dentures (IARPDs) is unknown. The purpose of this in vitro study was to compare maximum dislodging forces of distal extension mandibular IARPD with two different attachments and three clasp designs. A simulated class I partially edentulous mandible was prepared with two screw-type 3.75 × 12 mm implants in the first molar regions and 2 metal-ceramic crowns on distal abutments. Fifteen bilateral distal extension frameworks were conventionally fabricated in three clasp designs (suprabulge, infrabulge, no clasp). Locator attachments were connected to the 15 denture bases with autopolymerized resin. Each specimen was subject to four types of retention pulls (main, anterior, posterior, unilateral pull) five times with a universal testing machine. Locator attachments were replaced with O-ring attachments, and the same procedure was performed. Therefore, the study groups included: IRPD with Locator attachment and suprabulge clasp (group 1), IRPD with Locator attachment and infrabulge clasp (group 2), IRPD with Locator attachment and no clasp (group 3), IRPD with O-ring attachment and suprabulge clasp (group 4), IRPD with O-ring attachment and infrabulge clasp (group 5), IRPD with O-ring attachment and no clasp (group 6). Data were analyzed using one-way ANOVA, two-way ANOVA, and Tukey tests. The highest mean value was 22.99 lb for prostheses with a Locator attachment and suprabulge clasp. The lowest retentive values were recorded for IARPDs with O-ring attachments. The results of this in vitro study suggest that the precise selection of attachments with or without clasp assemblies may affect the clinical success of mandibular IARPDs. © 2013 by the American College of Prosthodontists.

Management of anterior dental crossbite with removable appliances

Directory of Open Access Journals (Sweden)

Ayca Tuba Ulusoy

2013-01-01

Full Text Available This case report describes the treatment of an 8-year-old girl with anterior dental crossbite using a series of removable appliances to bring the teeth into a normal position. Clinical presentation and intervention: A removable acrylic appliance with a bite plate incorporating a screw was used to correct the anterior dental crossbite and align the incisors. The subsequent eruption of the maxillary left lateral incisor on the palatinal side was treated with a second acrylic plate incorporating a labiolingual spring. After an 8-month period, the anterior crossbite involving multiple incisors was corrected.

Autotransplantation of Mandibular Third Molar with Buccal Cortical Plate to Replace Vertically Fractured Mandibular Second Molar: A Novel Technique.

Science.gov (United States)

Zufía, Juan; Abella, Francesc; Trebol, Ivan; Gómez-Meda, Ramón

2017-09-01

Tooth replacement often leads to inadequate vertical volume in the recipient site bone when a tooth has been extracted because of a vertical root fracture (VRF). This case report presents the autotransplantation of a mandibular third molar (tooth #32) with the attached buccal cortical plate to replace a mandibular second molar (tooth #31) diagnosed with a VRF. After extraction of tooth #31, the recipient socket was prepared based on the size measured in advance with cone-beam computed tomographic imaging. The precise and calculated osteotomy of the cortical bone of tooth #32 allowed for the exact placement of the donor tooth in the position of tooth #31. The total extraoral time was only 25 minutes. The block was fixed to the recipient socket with an osteosynthesis screw and splinted with a double resin wire for 8 weeks. At the 6-month follow-up, the screw was removed, and the stability of the tooth and the regeneration obtained throughout the vestibular area were confirmed. At the 2-year follow-up, the transplanted tooth was asymptomatic and maintained a normal bone level. Advantages of autotransplantation over dental implants include maintenance of proprioception, possible orthodontic movements, and a relatively low cost. This case report demonstrates that an autotransplantation of a third molar attached to its buccal cortical plate is a viable option to replace teeth with a VRF. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Root canal morphology and variations of mandibular premolars by clearing technique: an in vitro study.

Science.gov (United States)

Parekh, Vaishali; Shah, Nimisha; Joshi, Hardik

2011-07-01

The aim of this study was to compare internal anatomy between first and second mandibular premolars and to study different percentage variations of root canal morphology of mandibular premolars in Gujarat population based on Vertucci's classification by clearing technique. A total of 80 extracted intact permanent mandibular premolars (40 each mandibular first premolar and mandibular second premolar) with fully formed apices were collected. Access cavity was prepared with endo access kit, all samples were placed in 2.5% sodium hypochlorite for 48 hours, after that all samples were washed in running water for 2 hours. After washing, all samples were transferred to 5% nitric acid, for decalcification, for 72 hours, with the acid being changed every 24 hours and stirred once every 8 hours. All samples were washed in running water and dehydrated using ascending grades (70%, 80%, 90% and 100%) of isopropyl alcohol for 2 days. Finally, they were rendered transparent by immersion in methyl salicylate for 15 minutes and then India ink dye was injected into the access cavity. The anatomy of the root canal was observed and classified based on the Vertucci's classification. Parametric Z-test was used to compare the variation between mandibular first and second premolars. In mandibular first premolar, type 1 was found in 20%, type 2 was 5%, type 3 was 5%, type 4 was 25%, type 5 was 12.5% and type 6 was 2.5% of total samples. Whereas, in mandibular second premolar, type 1 was found in 80% out of all samples, type 4 was 2.5%, type 5 was 17.5%. Type 2, type 3, type 6, type 7 and type 8 were not found in this study. Mandibular first premolar showed higher variation (75%) compared to mandibular second premolar (37.5%). The knowledge of variations in the root canal morphology of the mandibular premolars can enhance the level of endodontic treatment of mandibular premolars. Root canal morphology, Vertucci's classification, Clearing technique. How to cite this article: Parekh V, Shah N

Management of mandibular body fractures in pediatric patients: a case report with review of literature.

Science.gov (United States)

John, Baby; John, Reena R; Stalin, A; Elango, Indumathi

2010-10-01

Mandibular fractures are relatively less frequent in children when compared to adults, which may be due to the child's protected anatomic features and infrequent exposure of children to alcohol related traffic accidents. Treatment principles of mandibular fractures differ from that of adults due to concerns regarding mandibular growth and development of dentition. A case of a 4.5-year-old boy with fractured body of mandible managed by closed reduction using open occlusal acrylic splint and circum mandibular wiring is presented. This article also provides a review of literature regarding the management of mandibular body fracture in young children.

Management of mandibular body fractures in pediatric patients: A case report with review of literature

Directory of Open Access Journals (Sweden)

Baby John

2010-01-01

Full Text Available Mandibular fractures are relatively less frequent in children when compared to adults, which may be due to the child′s protected anatomic features and infrequent exposure of children to alcohol related traffic accidents. Treatment principles of mandibular fractures differ from that of adults due to concerns regarding mandibular growth and development of dentition. A case of a 4.5-year-old boy with fractured body of mandible managed by closed reduction using open occlusal acrylic splint and circum mandibular wiring is presented. This article also provides a review of literature regarding the management of mandibular body fracture in young children.

Rates of anterior tooth wear in Middle Pleistocene hominins from Sima de los Huesos (Sierra de Atapuerca, Spain).

Science.gov (United States)

Bermúdez de Castro, J M; Martinón-Torres, M; Sarmiento, S; Lozano, M; Arsuaga, J L; Carbonell, E

2003-10-14

This study presents quantitative data on the rates of anterior tooth wear in a Pleistocene human population. The data were obtained for the hominin sample of the Sima de los Huesos site in Atapuerca, Spain. The fossil record belongs to a minimum of 28 individuals of the same biological population, assigned to the species Homo heidelbergensis. We have estimated the original and the preserved crown height of the mandibular incisors (I1 and I2) of 11 individuals, whose age at death can be ascertained from the mineralization stage and tooth eruption. Results provide a range of 0.276-0.348 and 0.288-0.360 mm per year for the mean wear rate of the mandibular I1 and I2, respectively, in individuals approximately 16-18 years old. These data suggest that incisors' crowns would be totally worn out toward the fifth decade of life. Thus, we expect the life expectancy of this population to be seriously limited. These data, which could be contrasted with results obtained on hominins at other sites, could be of interest for estimating the death age of adult individuals.

Polymerase chain reaction in unilateral cases of presumed viral anterior uveitis

Directory of Open Access Journals (Sweden)

Shoughy SS

2015-12-01

Full Text Available Samir S Shoughy,1 Hind M Alkatan,2,4 Abdulelah A Al-Abdullah,2 Albarah El-Khani,2 Jolanda DF de Groot-Mijnes,3 Khalid F Tabbara1,4,5 1Department of Ophthalmology, The Eye Center and The Eye Foundation for Research in Ophthalmology, 2Department of Pathology & Laboratory Medicine and Uveitis Division, King Khaled Eye Specialist Hospital, Riyadh, Saudi Arabia; 3Department of Virology and Ophthalmology, University Medical Center Utrecht, Utrecht, the Netherlands; 4Department of Ophthalmology, College of Medicine, King Saud University, Riyadh, Saudi Arabia; 5The Wilmer Ophthalmological Institute of The Johns Hopkins University School of Medicine, Baltimore, MD, USA Background and objectives: Anterior uveitis is the most common form of intraocular inflammation. The main aim of this study was to determine the viral etiology in patients with unilateral cases of anterior uveitis.Patients and methods: A total of 12 consecutive patients with the diagnosis of idiopathic unilateral anterior uveitis were included prospectively. Aqueous specimens were obtained from each patient by anterior chamber paracentesis and subjected to the detection of viral DNA/RNA genome by polymerase chain reaction assay for herpes simplex virus, varicella zoster virus, cytomegalovirus, Epstein–Barr virus, and rubella virus.Results: There were six male and six female patients. The mean age was 43 years, with an age range of 11–82 years. All 12 cases presented with unilateral anterior uveitis. In four (33% patients, polymerase chain reaction was positive for viral genome. Two patients were positive for herpes simplex virus type 1, one patient was positive for cytomegalovirus and one for Epstein–Barr virus.Conclusion: Recent molecular diagnostic assays would help in the identification of the causative agent in patients with unilateral anterior uveitis. Keywords: viral anterior uveitis, PCR, herpes simplex virus, cytomegalovirus, diffuse keratic precipitates, anterior chamber

Autotransplantation of a mandibular third molar: A case report

Directory of Open Access Journals (Sweden)

Elham Najafi

2017-09-01

Full Text Available Tooth autotransplantation defines as transition of one tooth from one position to another, in same individual. It is a biological procedure in which teeth have the potential to induce alveolar bone growth. It can be applied in patients before adolescence growth is finished. It significantly reduces time and cost compared to implants. Healing rapidly occurs and function is regained almost immediately. Our case was a 15-year-old male that his left mandibular third molar transplanted to the second molar sight after extraction of second molar because of unrestorable crown. During 9 month follow up transplanted tooth was asymptomatic, functional and responsive to sensibility tests. (Cold test, EPT.

Conservative Management of Unilateral Fractures of the Mandibular Rami in Horses.

Science.gov (United States)

Jansson, Nicolai

2016-11-01

To report the outcome of conservative management of unilateral fractures of the mandibular rami in horses. Retrospective case series. 24 client-owned horses with unilateral mandibular fractures METHODS: Medical records (January 2000-January 2014) of horses with unilateral mandibular ramus fractures were retrieved. Only conservatively managed horses with follow-up information were included. Follow-up information on clinical outcome was retrieved from the medical records (n=11) or obtained by telephone interviews with the owners or trainers (n=13). Twenty-three horses (96%) returned to their previous or intended use and had no clinically evident masticatory or fracture healing-related problems at the time of follow-up. The owner of 1 horse (4%) reported it had tooth loosening, feed impaction, and masticatory problems. Conservative management of unilateral fractures of the mandibular rami is a treatment option in horses. © Copyright 2016 by The American College of Veterinary Surgeons.

Prolonged vertigo and ataxia after mandibular nerve block for treatment of trigeminal neuralgia

OpenAIRE

Arvind Chaturvedi; H H Dash

2011-01-01

Common complications of neurolytic mandibular nerve block are hypoesthesia, dysesthesia, and chemical neuritis. We report a rare complication, prolonged severe vertigo and ataxia, after neurolytic mandibular blockade in a patient suffering from trigeminal neuralgia. Coronoid approach was used for right sided mandibular block. After successful test injection with local anesthetic, absolute alcohol was given for neurolytic block. Immediately after alcohol injection, patient developed nausea and...

Patella position is not a determinant for anterior knee pain 10 years after balanced gap total knee arthroplasty.

Science.gov (United States)

van Houten, Albert H; Heesterbeek, Petra J C; Wymenga, Ate B

2016-08-01

Incidence of anterior knee pain after total knee arthroplasty (TKA) is reported to be between 4 and 49 %. The incidence of AKP at long-term follow-up and possible determinants after cruciate cruciate-retaining TKA were investigated. A 10-year follow-up of a cohort of 55 patients (63 TKAs), who received the balanSys™ cruciate-retaining total knee system (Mathys Ltd, Bettlach, Switzerland) between 1999 and 2002, was performed. Patients had undergone the balanced gap technique, with either a fixed bearing or an AP-glide bearing. Standardised diagnostic questions regarding AKP were collected and categorised into two groups: those with and without AKP. The lateral patellar tilt, patellar displacement measurement and modified Insall-Salvati ratio were used for patella position evaluation on skyline radiographs. The Knee Society Score (KSS), the Knee Osteoarthritis Outcome Score (KOOS) and Numerical Rating Scales (NRS) for pain and satisfaction were obtained at follow-up. Sixteen patients in the study population experienced AKP. Incidence of AKP (fixed bearing 13/44; AP-glide bearing baring 3/17) was not dependent on type of insert (n.s.). There were no statistical differences in patella position and tibiofemoral contact point between the AKP group and the no AKP group (n.s.). KSS, KOOS, NRS-pain and NRS-satisfaction were significantly lower for the patients with AKP (all p years after balanced gap TKA. Postoperative patella positioning was not found to be a determinant for anterior knee pain after TKA. However, patellar displacement does not seem completely favourable. Moreover, type of bearing was not found a determinant for AKP at long-term follow-up. Lower quality prospective cohort study (<80 % follow-up, patients enrolled at different time points in disease), Level II.

Recurrent simple bone cyst of the mandibular condyle: a case report

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyung A; Koh, Kwang Joon [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, and Institute of Oral Bio Science, Chonbuk National University, Jeonju (Korea, Republic of)

2013-03-15

Cysts of the mandibular condyle are rare and can be difficult to diagnose and treat. Clinically, a simple bone cyst is asymptomatic and often discovered incidentally on routine radiographic examination. This report shows an atypical simple bone cyst occurring in the mandibular condyle showing recurrence after surgical curettage. Radiologically, this lesion involving the mandibular condyle should be distinguished from other similar lesions such as a chondriome, a central giant cell granuloma, and an aneurysmal bone cyst. Radiographic assessment was useful for forecasting the prognosis of a simple bone cyst. Possible reasons for the recurrence were discussed radiographically.

Evaluation of local muscle soreness treatment with anterior bite splint made of soft putty impression material

Directory of Open Access Journals (Sweden)

Harry Laksono

2013-03-01

Full Text Available Background: Local muscle soreness is the most common temporomandibular disorders complaint of patients seeking treatment in the dental clinics. The emergency treatment that can be done in the clinics to manage this disorder is by making anterior bite splint. Anterior bite splint is usually made of acrylic, but currently there is a soft putty impression material that can also be used for making anterior bite splint. The effectiveness of soft putty anterior bite splint in local muscle soreness treatment still has not clear. Purpose: To determine the effectiveness of the soft putty impression material as a material used for making anterior bite splint in the treatment of local muscle soreness. Case: Six patients was reported five female patients aged 20-40 years old and one male patient aged 37 years old with local muscle soreness. Four female patients with a “click” sound on TMJ. Case management: Make differential diagnosis with screening history (anamnesis, clinical examination consists of extra oral examination such as muscle and temporomandibular joint palpation, measure the mandibular movement, end-feel, load test, intra oral examination and radiographic evaluation. Record the results and make the diagnosis. Make a soft putty anterior bite splint, adjusted and inserted in the maxillary anterior teeth. Record the results based on signs and symptoms. Conclusion: It can be concluded that anterior bite splint made of soft putty impression material is effective for treatment the local muscle soreness.Latar belakang: Salah satu tipe temporomandibular disorders yang paling sering dijumpai di klinik dokter gigi adalah local muscle soreness. Perawatan yang dapat dengan segera dilakukan di klinik untuk mengelola gangguan tersebut adalah dengan pembuatan anterior bite splint. Biasanya anterior bite splint terbuat dari akrilik, namun saat ini telah ada bahan cetak soft putty yang memungkinkan untuk dipakai sebagai bahan pembuatan anterior bite splint

Evaluation of mandibular condyles in children with unilateral posterior crossbite

Directory of Open Access Journals (Sweden)

Edson ILLIPRONTI-FILHO

2015-01-01

Full Text Available The relationship of mandibular condyle dimensions and its association with unilateral posterior crossbite (UPXB has been suggested in the literature. The purpose of this prospective study was to evaluate mandibular condyles on the left and right sides and between crossed and non-crossed sides in the sagittal and coronal planes, using cone-beam computed tomography (CBCT. Twenty CBCT images of 40 temporo mandibular joints (TMJs in individuals in mixed dentition phase, which included 9 males (mean 7.9 years and 11 females (mean 8.2 years, with unilateral posterior crossbite without premature contacts and functional mandibular shifts and with transverse maxillary deficiency. The criteria for sample exclusion included the presence of painful symptoms, facial trauma history, systemic diseases such as juvenile rheumatoid arthritis, mouth opening limitation (< 40 mm, congenital or genetic anomalies, and skeletal asymmetries that may result in TMJ disorders. Dimensional measurements of the condyles between the right and left sides and crossed and non-crossed sides in sagittal and coronal view were made. There was no significant difference between the measurements of the crossed and non-crossed sides in both sagittal and coronal view. These findings suggest that the presence of unilateral posterior crossbite in children with UPXB did not result in changes between the mandibular condyles in the right and left sides or between the crossed and non-crossed sides in the coronal or sagittal plane.

Intraoral Approach and Stereolithographic-guided Large Mandibular Reconstruction with Fibula Free Flap

Directory of Open Access Journals (Sweden)

Artur Diaz-Carandell, MD

2014-08-01

Full Text Available Summary: The reconstruction of mandibular defects has always been of great concern, and it still represents a challenge for head-and-neck reconstructive surgeons. The mandible plays a major role in mastication, articulation, swallowing, respiration, and facial contour. Thus, when undertaking mandibular reconstruction, restoration of both function and cosmetics should be considered as the measure of success. Microsurgical reconstruction is the gold-standard method to repair a segmental mandibular defect. Reconstruction of sizeable defects often needs a large neck incision, leading to unsatisfactory cosmetic outcomes. Virtual surgical planning and stereolithographic modeling are new techniques that offer excellent results and can provide precise data for mandibular reconstruction and improve postoperative outcomes. We present a case of complete intraoral resection and reconstruction of a large ameloblastoma of the mandible.

Developmental and evolutionary significance of the mandibular arch and prechordal/premandibular cranium in vertebrates: revising the heterotopy scenario of gnathostome jaw evolution

Science.gov (United States)

Kuratani, Shigeru; Adachi, Noritaka; Wada, Naoyuki; Oisi, Yasuhiro; Sugahara, Fumiaki

2013-01-01

The cephalic neural crest produces streams of migrating cells that populate pharyngeal arches and a more rostral, premandibular domain, to give rise to an extensive ectomesenchyme in the embryonic vertebrate head. The crest cells forming the trigeminal stream are the major source of the craniofacial skeleton; however, there is no clear distinction between the mandibular arch and the premandibular domain in this ectomesenchyme. The question regarding the evolution of the gnathostome jaw is, in part, a question about the differentiation of the mandibular arch, the rostralmost component of the pharynx, and in part a question about the developmental fate of the premandibular domain. We address the developmental definition of the mandibular arch in connection with the developmental origin of the trabeculae, paired cartilaginous elements generally believed to develop in the premandibular domain, and also of enigmatic cartilaginous elements called polar cartilages. Based on comparative embryology, we propose that the mandibular arch ectomesenchyme in gnathostomes can be defined as a Dlx1-positive domain, and that the polar cartilages, which develop from the Dlx1-negative premandibular ectomesenchyme, would represent merely posterior parts of the trabeculae. We also show, in the lamprey embryo, early migration of mandibular arch mesenchyme into the premandibular domain, and propose an updated version of the heterotopy theory on the origin of the jaw. PMID:22500853

Fetal jaw movement affects Ihh signaling in mandibular condylar cartilage development: the possible role of Ihh as mechanotransduction mediator.

Science.gov (United States)

Jahan, Esrat; Matsumoto, Akihiro; Rafiq, Ashiq Mahmood; Hashimoto, Ryuju; Inoue, Takayuki; Udagawa, Jun; Sekine, Joji; Otani, Hiroki

2014-10-01

Jaw movement is an important mechanical factor for prenatal development of the condylar cartilage of mandible. Fetal jaw movement restriction has been shown to cause deformity of the mandibular condyle. We hypothesized that this treatment affects the expression of mechanosensitive molecules, namely Indian hedgehog (Ihh) and Parathyroid hormone related protein (PTHrP) in the condyle. We restrained jaw movement by suturing the jaw of E15.5 mouse embryos and allowed them to develop until E18.5 using exo utero system, and analyzed them by immunohistochemistry and in situ hybridization methods. Morphological, histomorphometric and immunohistochemical study showed that the mandibular condylar cartilage was reduced and deformed, the volume and total cell numbers in the condylar cartilage were also reduced, and number and/or distribution of 5-bromo-2'-deoxyuridine-positive cells, Ihh-positive cells in the mesenchymal and pre-hypertrophic zones were significantly and correspondingly decreased in the sutured group. Using in situ hybridization, reduced expression of Ihh, PTHrP and their related receptors were observed in condylar cartilage of the sutured embryos. Our results revealed that the altered mechanical stress induced by prenatal jaw movement restriction decreased proliferating cells, the amount of cartilage, and altered expression of the Ihh and PTHrP, suggesting that Ihh act as mechanotransduction mediators in the development of mandibular condylar cartilage. Copyright © 2014 Elsevier Ltd. All rights reserved.

Longitudinal evaluation of jaw muscle activity and mandibular kinematics in young patients with Class II malocclusion treated with the Teuscher activator.

Science.gov (United States)

Cuevas, Maria-José; Cacho, Alberto; Alarcón, Jose-Antonio; Martín, Conchita

2013-05-01

A longitudinal study was performed to evaluate the jaw muscle activity and mandibular kinematics after Teuscher activator treatment and at 2 years after orthodontic treatment completion. Twenty-seven children with Class II division 1 malocclusion were evaluated before treatment (T0; mean: 11.6 years), after functional treatment (T1; mean: 12.8 years), and 2 years after orthodontic treatment (T2; mean: 18 years). Bilateral surface electromyographic activities of the anterior temporalis, posterior temporalis, masseter, and suprahyoid muscle areas were analyzed at rest and during clenching, swallowing, and mastication. Kinematic recordings of the mandibular maximum opening, lateral shift, right and left lateral excursions, and protrusion were evaluated. Compared to T0, the left masseter activity during clenching was decreased at T1 but increased at T2, similar to the other evaluated muscles. The suprahyoid activity during swallowing was increased at T1 but decreased at T2. The masseter activity during mastication was increased at T1 and further increased at T2. The left and right lateral excursions and protrusion did not show significant changes throughout the experiment. Teuscher activator and subsequent fixed orthodontic treatment improved jaw muscle function; however, a long period was needed to attain complete neuromuscular adaptation.

Lamina cribrosa position and Bruch's membrane opening differences between anterior ischemic optic neuropathy and open-angle glaucoma.

Science.gov (United States)

Rebolleda, Gema; Pérez-Sarriegui, Ane; Díez-Álvarez, Laura; De Juan, Victoria; Muñoz-Negrete, Francisco J