GPS measurements along the North Anatolian fault zone ont he Mid-Anatolia segment

Science.gov (United States)

Yavasoglu, H.; Team

2003-04-01

The North Anatolian Fault (NAF) is the most important tectonic feature in Turkey producing lots of earthquakes that cause deaths, wounds and loss of property in large scale. So, there are a lot of seismic, geodetic, geologic and geophysical researches through NAF. A new project, "Determination of Kinematics along the North Anatolian Fault Branch between Ladik and Ilgaz with GPS Measurements", founded by The Scientific and Technical Research Council of Turkey (TUBITAK) and Istanbul Technical University (ITU) Research Fund is also started. The aim of the project is to determine the magnitude and direction of the block movements in the region by using GPS. Having the knowledge about the neotectonics of the region with the contributions of geology and seismology after the GPS campaigns will provide further information on the assessment of the earthquake potential. In this work, the planning stage of the network is examined. Also pre-results from the first and second surveying campaigns are presented. 1. INTRODUCTION The tectonic framework of the Eastern Mediterranean is dominated by the collision of the Arabian and African plates with the Eurasia. This collision created wide variety of tectonic processes such as folds and thrust belts, major continental strike-slip faults, opening of pull-apart basins etc. All these tectonic caused long-term destructive earthquakes in Anatolia Last earthquakes occurred at the end of the 20th Century, in 17th of August and 12 of November 1999, Golcuk and Duzce earthquakes, also focused the attention of international science community over the tectonics and kinematics of the NAF. A westward migrating earthquakes series starting from 1939 Erzincan earthquake, produced more than 1000 kilometers of ruptures between Erzincan and Sea of Marmara 2. GEOLOGICAL FEATURES OF NAF The North Anatolian Fault (NAF) is one of the longest active strike slip systems. Slip rate of the NAF was estimated from the GPS data as 24±1mm/yr. One of the important

A 3400 year lacustrine paleoseismic record from the North Anatolian Fault, Turkey: Implications for bimodal recurrence behavior

KAUST Repository

Avsar, Ulas

2014-01-28

High-resolution physical, geochemical, and geochronological analyses on the sedimentary sequence of Yeniçağa Lake, located in a fault-bounded basin along the North Anatolian Fault, reveal fingerprints of paleoearthquakes. A robust sediment chronology, spanning the last 3400 years, is constructed by radiocarbon dating and time-stratigraphical correlation with the precisely dated Sofular Cave speleothem record. Yeniçağa sedimentary sequence contains 11 seismically induced event deposits characterized by siliciclastic-enriched intervals. Some of the event deposits are also associated with implications of sudden lake deepening, which may be related to coseismic subsidence. The paleoearthquake series having an average recurrence interval of ca. 260 years are interrupted by two possible seismic gaps of ca. 420 and 540 years.

A 3400 year lacustrine paleoseismic record from the North Anatolian Fault, Turkey: Implications for bimodal recurrence behavior

KAUST Repository

Avsar, Ulas; Hubert-Ferrari, Auré lia; Batist, Marc De; Fagel, Nathalie

2014-01-01

High-resolution physical, geochemical, and geochronological analyses on the sedimentary sequence of Yeniçağa Lake, located in a fault-bounded basin along the North Anatolian Fault, reveal fingerprints of paleoearthquakes. A robust sediment chronology, spanning the last 3400 years, is constructed by radiocarbon dating and time-stratigraphical correlation with the precisely dated Sofular Cave speleothem record. Yeniçağa sedimentary sequence contains 11 seismically induced event deposits characterized by siliciclastic-enriched intervals. Some of the event deposits are also associated with implications of sudden lake deepening, which may be related to coseismic subsidence. The paleoearthquake series having an average recurrence interval of ca. 260 years are interrupted by two possible seismic gaps of ca. 420 and 540 years.

A Catalogue of Source Parameters of Moderate and Strong Earthquakes for Turkey and its Surrounding Area (1938-2015)

Science.gov (United States)

Kalafat, D.; Toksoz, M. N.

2015-12-01

Turkey and Surrounding area, especially North Anatolian Fault Zone (NAFZ), East Anatolian Fault Zone (EAFZ), Western Turkey, cost of the Aegean Sea and Mediterranean Sea regions are seismically very active and undergoing rapid deformation. Earthquakes with M >6.0 do occur every couple of years regularly in this region, Moderate-magnitude seismicity (4.04.0 which were calculated of the fault-source parameters for Turkey and its surrounding area between 1938-2015. The fault source parameters of total over the 1200 earthquakes were calculated. The fault-source parameters of about 56.0 % of the all events were calculated with this study and 44.0 % of the rest were obtained from the other sources. The parameters of the old and incomplete events also were calculated in order to prepare the homogeneous and extended fault- source parameters set in the study. ACKNOWLEDGMENTS This study was supported by the Department of Science Fellowship and Grant programs of TUBITAK (The Scientific and Technological Research Council of Turkey).

Influence of the Istranca-Rhodope Massifs and strands of the North Anatolian Fault on oil potential of Thrace Basin, NW Turkey

International Nuclear Information System (INIS)

Coskun, B.

2000-01-01

The Thrace Basin (NW Turkey) is an intermontane trough bounded to the north and west by the granitic and metamorphic rocks of the Istranca and Rhodope Massifs. Recent subsurface studies of the NW portion of the Thrace Basin have led to the identification of two trends in geothermal gradient, both of which are oriented approximately NW-SE (i.e. parallel to the depositional axis of the basin). Geological and geophysical data indicate that, due to the thrust of the Istranca Massif upon the Rhodope Massif, the subsurface temperature may have increased in the northern part of the basin. Other controls were wrench-fault activity of the Splays of the North Anatolian Fault (SNAF) and continuing basinal subsidences. The thermal history of the southern part of the basin was affected by Miocene ophiolitic emplacement to the west in Greece. The presence of a belt of intrabasinal palaeotopography (mainly Palaeozoic rocks) also contributed to increased geothermal gradients in the southern part of the study area. The basin is divisible into northern and southern zones of subsidence, which are separated by the Kuleli-Babaeski High. During the Oligocene, subsidence rates were highest in the northern zone and in the western sector of the southern zone. Later, during the Miocene, basin subsidence was associated with intense tectonic activity of the SNAF and with the emplacement of ophiolites to the west. A map of the top of the oil generation zone, based on TTI values calculated by the Lopatin method, indicates the presence of two maturation zones in the basin ; these were separated by the Late Oligocene Kuleli-Babaeski High. Oil generation in these zones was influenced by rapid subsidence, by a NW-SE oriented wrench fault system associated with the NAF and also by tectonic activity of the Istranca and Rhodope Massifs in the study area

Preliminary investigation on the deformation rates of the Nazimiye Fault (Eastern Turkey)

Science.gov (United States)

Sançar, Taylan

2016-04-01

fault-bounded mountain fronts. In addition to that I also extracted hypsometric curves, hypsometric integrals and stream length gradient index to understand the relationship between characteristics of the drainage basins and tectonic activity. As preliminary results, I conclude that the southern segment of the NF is tectonically quiescent, whereas the deformation is mainly accommodated on the northern branch. References Emre, Ö., Duman, T.Y., Kondo, H., Olgun, Ş., Özalp, S., Elmacı, H., 2012. 1:250.000 Ölçekli Türkiye Diri Fay Haritası Serisi, Erzincan (NJ37-3) Paftası, Seri No:44, Maden Tetkik ve Arama Genel Müdürlüǧü, Ankara-Türkiye. Kara, K., Sançar, T., Zabci, C., 2013. Morphologic and Morphotectonic Characteristics of the Nazimiye Fault Zone, Eastern Turkey. EGU2013-8105, EGU General Assembly Vienna, Austria. Şengör, A.M.C., 1979. The North Anatolian transform fault; its age, offset and tectonic significance. Journal of the Geological Society of London 136, Part 3, 269-282.

Aseismic creep along the North Anatolian Fault quantified by coupling microstructural strain and chemical analyses

Science.gov (United States)

Kaduri, Maor; Gratier, Jean-Pierre; Renard, François; Çakir, Ziyadin; Lasserre, Cécile

2017-04-01

In the last decade aseismic creep has been noted as one of the key processes along tectonic plate boundaries. It contributes to the energy budget during the seismic cycle, delaying or triggering the occurrence of large earthquakes. Several major continental active faults show spatial alternation of creeping and locked segments. A great challenge is to understand which parameters control the transition from seismic to aseismic deformation in fault zones, such as the lithology, the degree of deformation from damage rocks to gouge, and the stress driven fault architecture transformations at all scales. The present study focuses on the North Anatolian Fault (Turkey) and characterizes the mechanisms responsible for the partition between seismic and aseismic deformation. Strain values were calculated using various methods, e.g. Fry, R-φs from microstructural measurements in gouge and damage samples collected on more than 30 outcrops along the fault. Maps of mineral composition were reconstructed from microprobe measurements of gouge and damage rock microstructure, in order to calculate the relative mass changes due to stress driven processes during deformation. Strain values were extracted, in addition to the geometrical properties of grain orientation and size distribution. Our data cover subsamples in the damage zones that were protected from deformation and are reminiscent of the host rock microstructure and composition, and subsamples that were highly deformed and recorded both seismic and aseismic deformations. Increase of strain value is linked to the evolution of the orientation of the grains from random to sheared sub-parallel and may be related to various parameters: (1) relative mass transfer increase with increasing strain indicating how stress driven mass transfer processes control aseismic creep evolution with time; (2) measured strain is strongly related with the initial lithology and with the evolution of mineral composition: monomineralic rocks are

Fluids along the North Anatolian Fault, Niksar basin, north central Turkey: Insight from stable isotopic and geochemical analysis of calcite veins

Science.gov (United States)

Sturrock, Colin P.; Catlos, Elizabeth J.; Miller, Nathan R.; Akgun, Aykut; Fall, András; Gabitov, Rinat I.; Yilmaz, Ismail Omer; Larson, Toti; Black, Karen N.

2017-08-01

Six limestone assemblages along the North Anatolian Fault (NAF) Niksar pull-apart basin in northern Turkey were analyzed for δ18OPDB and δ13CPDB using bulk isotope ratio mass spectrometry (IRMS). Matrix-vein differences in δ18OPDB (-2.1 to 6.3‰) and δ13CPDB (-0.9 to 4.6‰) suggest a closed fluid system and rock buffering. Veins in one travertine and two limestone assemblages were further subjected to cathodoluminescence, trace element (Laser Ablation Inductively Coupled Plasma Mass Spectrometry) and δ18OPDB (Secondary Ion Mass Spectrometry, SIMS) analyses. Fluid inclusions in one limestone sample yield Th of 83.8 ± 7.3 °C (±1σ, mean average). SIMS δ18OPDB values across veins show fine-scale variations interpreted as evolving thermal conditions during growth and limited rock buffering seen at a higher-resolution than IRMS. Rare earth element data suggest calcite veins precipitated from seawater, whereas the travertine has a hydrothermal source. The δ18OSMOW-fluid for the mineralizing fluid that reproduces Th is +2‰, in range of Cretaceous brines, as opposed to negative δ18OSMOW-fluid from meteoric, groundwater, and geothermal sites in the region and highly positive δ18OSMOW-fluid expected for mantle-derived fluids. Calcite veins at this location do not record evidence for deeply-sourced metamorphic and magmatic fluids, an observation that differs from what is reported for the NAF elsewhere along strike.

Fethiye-Burdur Fault Zone (SW Turkey): a myth?

Science.gov (United States)

Kaymakci, Nuretdin; Langereis, Cornelis; Özkaptan, Murat; Özacar, Arda A.; Gülyüz, Erhan; Uzel, Bora; Sözbilir, Hasan

2017-04-01

Fethiye Burdur Fault Zone (FBFZ) is first proposed by Dumont et al. (1979) as a sinistral strike-slip fault zone as the NE continuation of Pliny-Strabo trench in to the Anatolian Block. The fault zone supposed to accommodate at least 100 km sinistral displacement between the Menderes Massif and the Beydaǧları platform during the exhumation of the Menderes Massif, mainly during the late Miocene. Based on GPS velocities Barka and Reilinger (1997) proposed that the fault zone is still active and accommodates sinistral displacement. In order to test the presence and to unravel its kinematics we have conducted a rigorous paleomagnetic study containing more than 3000 paleomagnetic samples collected from 88 locations and 11700 fault slip data collected from 198 locations distributed evenly all over SW Anatolia spanning from Middle Miocene to Late Pliocene. The obtained rotation senses and amounts indicate slight (around 20°) counter-clockwise rotations distributed uniformly almost whole SW Anatolia and there is no change in the rotation senses and amounts on either side of the FBFZ implying no differential rotation within the zone. Additionally, the slickenside pitches and constructed paleostress configurations, along the so called FBFZ and also within the 300 km diameter of the proposed fault zone, indicated that almost all the faults, oriented parallel to subparallel to the zone, are normal in character. The fault slip measurements are also consistent with earthquake focal mechanisms suggesting active extension in the region. We have not encountered any significant strike-slip motion in the region to support presence and transcurrent nature of the FBFZ. On the contrary, the region is dominated by extensional deformation and strike-slip components are observed only on the NW-SE striking faults which are transfer faults that accommodated extension and normal motion. Therefore, we claim that the sinistral Fethiye Burdur Fault (Zone) is a myth and there is no tangible

Geodynamic and Magmatic Evolution of the Eastern Anatolian-Arabian Collision Zone, Turkey

Science.gov (United States)

Keskin, Mehmet

2014-05-01

The Eastern Anatolian-Arabian Collision Zone represents a crucial site within the Tethyan domain where a subduction system involving a volcanic arc (i.e. Cretaceous to Oligocene Pontide volcanic arc in the north) associated with a large subduction-accretion complex (i.e. Cretaceous to Oligocene Eastern Anatolian Accretionary Complex i.e. "EAAC" in the south) turned later into a major continental collision zone that experienced a series of geodynamic events including lithospheric delamination, slab-steepening & breakoff, regional domal uplift, widespread volcanism and tectonic escape via strike slip fault systems. The region includes some of the largest volcanic centers (e.g. Karacadaǧ, Aǧırkaya caldera, Ararat, Nemrut, Tendürek and Süphan volcanoes) and plateaus (e.g. The Erzurum-Kars Plateau) as well as the largest transform fault zones in the Mediterranean region. A recent geodynamic modeling study (Faccenna et al., 2013) has suggested that both the closure of the Tethys Ocean and the resultant collision were driven by a large scale and northerly directed asthenospheric mantle flow named the "Tethyan convection cell". This convection cell initiated around 25 Ma by combined effects of mantle upwelling of the Afar super plume located in the south, around 3,000 km away from the collision zone and the slab-pull of the Tethyan oceanic lithosphere beneath Anatolia in the north. The aforementioned mantle flow dragged Arabia to the north towards Eastern Anatolia with an average velocity of 2 cm/y for the last 20 My, twice as fast as the convergence of the African continent (i.e. 1 cm/y) with western and Central Turkey. This 1 cm/y difference resulted in the formation of the left lateral Dead Sea Strike Slip Fault between the African and Arabian plates. Not only did this mantle flow result in the formation of a positive dynamic topography in the west of Arabian block, but also created a dynamic tilting toward the Persian Gulf (Faccenna et al., 2013). Another

L band InSAR sudy on the Ganos section of the North Anatolian Fault Zone (NAFZ)

Science.gov (United States)

de Michele, Marcello

2016-04-01

The North Anatolian Fault (NAF), with a total length of about 1500 km, is one of the most active right-lateral strike-slip faults in the world. It defines the tectonic boundary between the Anatolian Plate and the Eurasian Plate in northern Turkey, accommodating ~14-30 mm/yr of relative plate motion between the two plates (fig. 1). The Gazikoy-Saros segment (the Ganos fault, GF) is the onshore segment of the northern strand of the NAF between the Marmara Sea and the Gulf of Saros. It was last ruptured in 1912 with a Ms=7.4 earthquake that broke the entire inland segment of the fault, a length of about 50 km, and produced a right-lateral strike-slip component of at least 3 m. Other large historical earthquakes that have been attributed to the Ganos fault occurred in A.D. 824, 1343, 1509 and 1766 (e. g. Reilinger et al., 2000; Meade et al., 2002; Motagh et al., 2007; Janssen et al., 2009; Megraoui et al., 2012 ; Ersen Aksoy et al., 2010). The GF forms a 45 km long linear fault system and represents the link between the northern strand of the NAFZ in the Sea of Marmara and the North Aegean Trough where slip partitioning results in branching of the fault zone. The present study aims at showing the results retrieved from L band Interferometric Syntethic Aperture Radar (InSAR) measurements for the monitoring of Crustal Deformation in the Anatolian Fault Zone in the frame of the MARMARA SUPERSITE PROJECT "MARSITE" on the Ganos section of the North Anatolian fault zone. We processed SAR data made available through the CAT-1 ESA (European Space Agency) archives, acquired by the L-band radar sensor ALOS PALSAR between 2007 and 2011. The aim of this exercise is to test L-band capabilities to map the spatial and temporal evolution of the present-day crustal deformation phenomena affecting the Ganos section of the NAFZ with high level of spatial details. The goal of this task is to assess whether InSAR L-Band data can be useful to evaluate the long-term behavior of active faults

Radon exhalation rate on the Sivrice (Elazig ) fault zone

International Nuclear Information System (INIS)

Sahin, S.; Kuluoeztuerk, M. F.; Dogru, M.

2009-01-01

Four radon monitoring stations were built on the Sivrice Fault Zone which is a part of the East Anatolian Fault System that one of the very important two fault systems which tends to produce earthquake in Turkey. Radon exhalation rate were analyzed in the soil and water samples which collected around the stations. Radon exhalation rate in the soil and water samples were determined by using CR-39 that it is plastic detector.

Fleeing to Fault Zones: Incorporating Syrian Refugees into Earthquake Risk Analysis along the East Anatolian and Dead Sea Rift Fault Zones

Science.gov (United States)

Wilson, B.; Paradise, T. R.

2016-12-01

The influx of millions of Syrian refugees into Turkey has rapidly changed the population distribution along the Dead Sea Rift and East Anatolian Fault zones. In contrast to other countries in the Middle East where refugees are accommodated in camp environments, the majority of displaced individuals in Turkey are integrated into cities, towns, and villages—placing stress on urban settings and increasing potential exposure to strong shaking. Yet, displaced populations are not traditionally captured in data sources used in earthquake risk analysis or loss estimations. Accordingly, we present a district-level analysis assessing the spatial overlap of earthquake hazards and refugee locations in southeastern Turkey to determine how migration patterns are altering seismic risk in the region. Using migration estimates from the U.S. Humanitarian Information Unit, we create three district-level population scenarios that combine official population statistics, refugee camp populations, and low, median, and high bounds for integrated refugee populations. We perform probabilistic seismic hazard analysis alongside these population scenarios to map spatial variations in seismic risk between 2011 and late 2015. Our results show a significant relative southward increase of seismic risk for this period due to refugee migration. Additionally, we calculate earthquake fatalities for simulated earthquakes using a semi-empirical loss estimation technique to determine degree of under-estimation resulting from forgoing migration data in loss modeling. We find that including refugee populations increased casualties by 11-12% using median population estimates, and upwards of 20% using high population estimates. These results communicate the ongoing importance of placing environmental hazards in their appropriate regional and temporal context which unites physical, political, cultural, and socio-economic landscapes. Keywords: Earthquakes, Hazards, Loss-Estimation, Syrian Crisis, Migration

Seismicity and Seismotectonic Properties of The Sultandağı Fault Zone (Afyonkarahisar-Konya): Western Anatolia,Turkey

Science.gov (United States)

Kalafat, D.; Gunes, Y.; Kekovali, K.; Kara, M.; Gorgun, E.

2017-12-01

n this study we investigated seismicity and source characteristics of the Sultandağı Fault Zone (SFZ). As known Western Anatolia is one of the most important seismically active region in Turkey. The relative movement of the African-Arabian plates, it causes the Anatolian Plate to movement to the west-Southwest direction 2.5 cm per year and this result provides N-S direction with extensional regime in the recent tectonic. In this study, especially with the assessment of seismic activity occurring in Afyon and around between 200-2002 years, we have been evaluated to date with seismic activity as well as fault mechanism solution. We analyzed recent seismicity and distribution of earthquakes in this region. In the last century, 3 important earthquakes occurred in the Sultandağı Fault zone (Afyon-Akşehir Graben), this result shown it was seismic active and broken fault segments caused stress balance in the region and it caused to occur with short intervals of earthquakes in 2000 and 2002, triggering each other. The scope of this tudy, we installed new BB stations in the region and we have been done of the fault plane solutions for important earthquakes. The focal mechanisms clearly exhibit the activation of a NE-SW trending normal faulting system along the SFZ region. The results of stress analysis showed that the effective current tectonic evolution of normal faulting in this region. This study is supported by Bogazici University Research Projects Commission under SRP/BAP project No. 12280. Key Words: Sultandağı fault zone, normal faulting, seismicity, fault mechanism

Subsurface signature of North Anatolian Fault Zone and its relation with old sutures: New insight from receiver function analysis.

Science.gov (United States)

Özacar, Arda A.; Abgarmi, Bizhan

2017-04-01

The North Anatolian Fault Zone (NAFZ) is an active continental transform plate boundary that accommodates the westward extrusion of the Anatolian plate. The central segment of NAFZ displays northward convex surface trace which coincides partly with the Paleo-Tethyan suture formed during the early Cenozoic. The depth extent and detailed structure of the actively deforming crust along the NAF is still under much debate and processes responsible from rapid uplift are enigmatic. In this study, over five thousand high quality P receiver functions are computed using teleseismic earthquakes recorded by permanent stations of national agencies and temporary North Anatolian Fault Passive Seismic experiment (2005-2008). In order to map the crustal thickness and Vp/Vs variations accurately, the study area is divided into grids with 20 km spacing and along each grid line Moho phase and its multiples are picked through constructed common conversion point (CCP) profiles. According to our results, nature of discontinuities and crustal thickness display sharp changes across the main strand of NAFZ supporting a lithospheric scale faulting that offsets Moho discontinuity. In the southern block, crust is relatively thin in the west ( 35 km) and becomes thicker gradually towards east ( 40 km). In contrast, the northern block displays a strong lateral change in crustal thickness reaching up to 10 km across a narrow roughly N-S oriented zone which is interpreted as the subsurface signature of the ambiguous boundary between Istanbul Block and Pontides located further west at the surface.

Extent and distribution of aseismic slip on the Ismetpaşa segment of the North Anatolian Fault (Turkey) from Persistent Scatterer InSAR

KAUST Repository

Cetin, Esra

2014-07-01

We use the Persistent Scatterer InSAR (PSI) technique with elastic dislocation models and geology along the creeping section of the North Anatolian Fault (NAF) at Ismetpaşa, to map and deduce the velocity field and the aseismic slip distribution. Revealing the spatiotemporal nature of the creep helped us associate the creep with potential lithological controls, hence providing a new perspective to better understand the underlying causes and mechanisms. The PSI analysis of Envisat ASAR images between 2003 and 2010 reveals a clear picture of surface creep along the fault and a new interseismic velocity field transitioning gradually between the creeping and the locked fault sections. The creep rate is found to fluctuate along a 100 km long section of the fault in a manner similar to that along the Hayward fault, reaching a maximum of ∼20±2 mm/yr, close to the far field plate velocity (∼25±1.5 mm/yr). At Ismetpaşa, it is in the range of 8±2 mm/yr, consistent with the previous geodetic observations. The creeping section appears to extend 30 km further east than those previously reported. Modeling of the PSI data reveals a heterogeneous creep distribution at depth with two main patches confined mostly to the uppermost 5 km portion of the seismogenic crust, releasing annually 6.2 × 1016 Nm (Mw=5.1) geodetic moment. Our analysis combined with previous studies suggests that creep might have commenced as postseismic deformation following the 1944 earthquake and has evolved to stable fault creep with time. There is a correlation between aseismic surface creep and the geology along the fault as it is in major part associated to rocks with low frictional strength such as the andesitic-basaltic, limestone, and serpentine bodies within the fault zone. © 2014. American Geophysical Union. All Rights Reserved.

Sedimentary records of past earthquakes in Boraboy Lake during the last ca 600 years (North Anatolian Fault, Turkey)

KAUST Repository

Avsar, Ulas

2015-05-21

Multiproxy sedimentological analyses along 4.9 m-long sequence of Boraboy Lake, which is located on the central eastern part of the North Anatolian Fault (NAF), reveal the sedimentary traces of past large earthquakes in the region. The lake has a relatively large catchment area (10 km2) compared to its size (0.12 km2), which renders sedimentation sensitive to heavy rain/storm events. Accordingly, the background sedimentation, which is composed of faintly laminated reddish/yellowish brown clayey silt, is frequently interrupted by organic-rich intercalations probably due to heavy rain/storm events transporting terrestrial plant remains from the densely vegetated catchment. In addition to frequent organic-rich intercalations, the background sedimentation is interrupted by four mass-wasting deposits (MWD) of which thickness range between 15 and 50 cm. High-resolution ITRAX μXRF data confirms higher homogeneity along the MWDs (E1-E4) compared to the background sedimentation. Based on 137Cs and 210Pbxs dating and radiocarbon chronology, three MWDs detected in Boraboy sequence (E2, E3 and E4) temporally correlate with large historical earthquakes along the NAF; the 1943 Tosya (Ms= 7.6) and/or 1942 Niksar-Erbaa (Ms= 7.1), the 1776 Amasya-Merzifon and the 1668 North Anatolian (Ms= 7.9) earthquakes. The youngest MWD in the sequence (E1), which is dated to early 2000s, does not correlate with any strong earthquake in the region. This MWD was probably a single mass-wasting event due to routine overloading and oversteepening on the delta front formed by the main inlet of the lake. In subaqueous paleoseismology, coevality of multi-location mass-wasting events is used as a criterion to assign a seismic triggering mechanism, and to rule out mass-wasting events due to routine overloading/oversteepening of subaqueous slopes. Within this context, Boraboy sequence provides a valuable example to discuss sedimentological imprints of single- vs. multi-source MWDs.

Is the Marmara Sea segment of the North Anatolian Fault Creeping or loading ?

Science.gov (United States)

Klein, Emilie; Masson, Frédéric; Duputel, Zacharie; Yavasoglu, Hakan

2016-04-01

During the last century, the North Anatolian Fault has experienced a migrating Mw>7 earthquakes sequence that ruptured about 1000 km of the fault westward. The last major earthquakes occurred in 1999 in Izmit (Mw7.4) and Duzce (Mw7.2). Only the segments located directly offshore of Istanbul, in the Marmara Sea, remain unbroken in this series of events. This region represents a major issue in terms of seismic hazard with more than 13 millions inhabitants in the city of Istanbul. However, a strong controversy remains over whether the central segment of the Main Marmara Fault is locked and likely to experience a major earthquake, or not. Recent studies based on geodetic data suggest indeed that, contrary to the Prince's Island segment which is fully locked, the central segment is accommodating the strain by aseismic fault creep. So it has not the potential to generate a Mw ~7 event. These results, mostly based on relatively simple strain accumulation models over infinitely long faults, is contested by a recent seismic data study, which suggests on the contrary that this fault segment is fully locked and mature to generate such a great earthquake. In this study, we revisit the available geodetic data considering a 3D geometry of the fault, allowing to take into account the lateral variations of behavior along the fault. In particular, we evaluate if current geodetic datasets are sufficient to constrain strain accumulation and thus to conclude about the seismic hazard in the region.

Interseismic Strain Accumulation of the Gazikoy-Saros segment (Ganos fault) of the North Anatolian Fault Zone

Science.gov (United States)

Havazli, E.; Wdowinski, S.; Amelung, F.

2017-12-01

The North Anatolian Fault Zone (NAFZ) is one of the most active continental transform faults in the world. A westward migrating earthquake sequence has started in 1939 in Erzincan and the last two events of this sequence occurred in 1999 in Izmit and Duzce manifesting the importance of NAFZ on the seismic hazard potential of the region. NAFZ exhibits slip rates ranging from 14-30 mm/yr along its 1500 km length with a right lateral strike slip characteristic. In the East of the Marmara Sea, the NAFZ splits into two branches. The Gazikoy-Saros segment (Ganos Fault) is the westernmost and onshore segment of the northern branch. The ENE-WSW oriented Ganos Fault is seismically active. It produced a Ms 7.2 earthquake in 1912, which was followed by several large aftershocks, including Ms 6.3 and Ms 6.9 events. Since 1912, the Ganos Fault did not produce any significant earthquakes (> M 5), in contrast to its adjacent segments, which produced 20 M>5 earthquakes, including a M 6.7 event, offshore in Gulf of Saros. Interseismic strain accumulation along the Ganos Fault was assessed from sparse GPS measurements along a single transect located perpendicular to the fault zone, suggesting strain accumulation rate of 20-25 mm/yr. Insofar, InSAR studies, based on C-band data, didn't produce conclusive results due to low coherence over the fault zone area, which is highly vegetated. In this study, we present a detailed interseismic velocity map of the Ganos Fault zone derived from L-band InSAR observations. We use 21 ALOS PALSAR scenes acquired over a 5-year period, from 2007 to 2011. We processed the ALOS data using the PySAR software, which is the University of Miami version of the Small Baseline (SB) method. The L-band observations enabled us to overcome the coherence issue in the study area. Our initial results indicate a maximum velocity of 15 mm/yr across the fault zone. The high spatial resolution of the InSAR-based interseismic velocity map will enable us to better to

Modelling the productivity of Anatolian black pine plantations in Turkey

Directory of Open Access Journals (Sweden)

Şükrü Teoman Güner

2016-01-01

Full Text Available This study was carried out to determine the relationships between height growth (site index of Anatolian black pine (Pinus nigra Arnold. subsp. pallasina (Lamb. Holmboe and site factors of the plantation areas in Turkey. Data were collected from 118 sample plots by taking into consideration the variations of aspect, altitude, slope position, slope degree and site class. A representative tree for the productivity and soil samples were taken at each sample plot. Some chemical and physical properties of soil samples were determined in the laboratory. The relationships between site index values of the trees and site factors including parent material, soil, climate and topography were examined by using correlation, stepwise regression and regression tree analysis. Significant linear relations were found between site index of black pine and site factors being altitude, slope degree, slope position, annual rainfall, precipitation amount in the most drought month, solum depth and bedrock including granite, mica schist and dacite. Explanation variance percentage on the site index of black pine was found 54.4% by using regression tree analysis whereas explained variance become 34.7% by stepwise regression analysis.

Tectonic Evolution of the Çayirhan Neogene Basin (Ankara), Central Turkey

Science.gov (United States)

Behzad, Bezhan; Koral, Hayrettin; İşb&idot; l, Duygu; Karaaǧa; ç, Serdal

2016-04-01

Çayırhan (Ankara) is located at crossroads of the Western Anatolian extensional region, analogous to the Basin and Range Province, and suture zone of the Neotethys-Ocean, which is locus of the North Anatolian Transform since the Late Miocene. To the north of Çayırhan (Ankara), a Neogene sedimentary basin comprises Lower-Middle Miocene and Upper Miocene age formations, characterized by swamp, fluvial and lacustrine settings respectively. This sequence is folded and transected by neotectonic faults. The Sekli thrust fault is older than the Lower-Middle Miocene age formations. The Davutoǧlan fault is younger than the Lower-Middle Miocene formations and is contemporaneous to the Upper Miocene formation. The Çatalkaya fault is younger than the Upper Miocene formation. The sedimentary and tectonic features provide information on mode, timing and evolution of this Neogene age sedimentary basin in Central Turkey. It is concluded that the region underwent a period of uplift and erosion under the influence of contractional tectonics prior to the Early-Middle Miocene, before becoming a semi-closed basin under influence of transtensional tectonics during the Early-Middle Miocene and under influence of predominantly extensional tectonics during the post-Late Miocene times. Keywords: Tectonics, Extension, Transtension, Stratigraphy, Neotectonic features.

Preliminary Interpretations of Multi-Channel Seismic Reflection and Magnetic Data on North Anatolian Fault (NAF) in the Eastern Marmara Region, Turkey

Science.gov (United States)

Gözde Okut Toksoy, Nigar; Kurt, Hülya; İşseven, Turgay

2017-04-01

The North Anatolian Fault (NAF) is 1600 km long, right lateral strike-slip fault nearly E-W elongated between Karlıova in the east and Saros Gulf in the west. NAF splays into two major strands near the west of Bolu city as Northern and Southern strands. Northern strand passes Sapanca Lake and extends towards west and reaches Marmara Sea through the Gulf of Izmit. The area has high seismicity; 1999 Kocaeli (Mw=7.4) and 1999 Düzce (Mw=7.2) earthquakes caused approximately 150 km long surface rupture between the Gulf of Izmit and Bolu. The rupture has four distinct fault segments as Gölcük, Sapanca, Sakarya, and Karadere from west to east. In this study multi-channel seismic and magnetic data are collected for the first time on the Sapanca Segment to investigate the surficial and deeper geometry of the NAF. Previously, the NAF in the eastern Marmara region is investigated using by paleo-seismological data from trenches on the surface rupture of fault or the geomorphological data (Lettis et al., 2000; Dikbaş and Akyüz, 2010) which have shallower depth targets. Crustal structure and seismic velocities for Central Anatolia and eastern Marmara regions are obtained from deeper targeted refraction data (Gürbüz et al., 1992). However, their velocity models do not have the spatial resolution to determine details of the fault zone structure. Multi-channel seismic and magnetic data in this study were acquired on two N-S directed profiles crossing NAF perpendicularly near Kartepe on the western part of the Sapanca Lake in October 2016. The receiver interval is 5 m, shot interval is 5-10 m, and the total length of the profiles are approximately 1400 m. Buffalo Gun is used as a seismic source for deeper penetration. Conventional seismic reflection processing steps are applied to the data. These are geometry definition, editing, filtering, static correction, velocity analysis and deconvolution, stacking and migration. Echos seismic software package in Geophysical Department

Patterns of active and passive smoking, and associated factors, in the South-east Anatolian Project (SEAP region in Turkey

Directory of Open Access Journals (Sweden)

Ceylan Ali

2006-01-01

Full Text Available Abstract Background Smoking is an important health threat in Turkey. This study aimed to determine the frequency of and main factors associated with smoking in persons of 15 years and over, and the frequency of passive smoking in homes in the South-east Anatolian Project (SEAP Region in Turkey. Methods A cross sectional design was employed. The sample waschosen by the State Institute of Statistics using a stratified cluster probability sampling method. 1126 houses representing the SEAP Region were visited. Questionnaires about tobacco smoking and related factors were applied to 2166 women and 1906 men (of 15 years old and above in their homes. Face-to-face interview methods were employed. Participants were classified as current, ex, and non-smokers. The presence of a regular daily smoker in a house was used as an indication of passive smoking. The chi-square andlogistic regressionanalysis methods were used for the statistical analysis. Results The prevalence of smoking, in those of 15 years and over, was 11.8% in women and 49.7% in men. The prevalence of current smokers was higher in urban (34.5 % than in rural (22.8 % regions. The mean of total cigarette consumption was 6.5 packs/year in women and 17.9 packs/year in men. There was at least one current smoker in 70.1% of the houses. Conclusion Smoking is a serious problem in the South-eastern Anatolian Region. Male gender, middle age, a high level of education and urban residency were most strongly associated with smoking.

Near surface structure of the North Anatolian Fault Zone near 30°E from Rayleigh and Love wave tomography using ambient seismic noise.

Science.gov (United States)

Taylor, G.; Rost, S.; Houseman, G. A.; Hillers, G.

2017-12-01

By utilising short period surface waves present in the noise field, we can construct images of shallow structure in the Earth's upper crust: a depth-range that is usually poorly resolved in earthquake tomography. Here, we use data from a dense seismic array (Dense Array for Northern Anatolia - DANA) deployed across the North Anatolian Fault Zone (NAFZ) in the source region of the 1999 magnitude 7.6 Izmit earthquake in western Turkey. The NAFZ is a major strike-slip system that extends 1200 km across northern Turkey and continues to pose a high level of seismic hazard, in particular to the mega-city of Istanbul. We obtain maps of group velocity variation using surface wave tomography applied to short period (1- 6 s) Rayleigh and Love waves to construct high-resolution images of SV and SH-wave velocity in the upper 5 km of a 70 km x 35 km region centred on the eastern end of the fault segment that ruptured in the 1999 Izmit earthquake. The average Rayleigh wave group velocities in the region vary between 1.8 km/s at 1.5 s period, to 2.2 km/s at 6 s period. The NAFZ bifurcates into northern and southern strands in this region; both are active but only the northern strand ruptured in the 1999 event. The signatures of both the northern and southern branches of the NAFZ are clearly associated with strong gradients in seismic velocity that also denote the boundaries of major tectonic units. This observation implies that the fault zone exploits the pre-existing structure of the Intra-Pontide suture zone. To the north of the NAFZ, we observe low S-wave velocities ( 2.0 km/s) associated with the unconsolidated sediments of the Adapazari basin, and blocks of weathered terrigenous clastic sediments. To the south of the northern branch of the NAFZ in the Armutlu block, we detect higher velocities ( 2.9 km/s) associated with a shallow crystalline basement, in particular a block of metamorphosed schists and marbles that bound the northern branch of the NAFZ.

Analysis of soft-sediment deformation structures in Neogene fluvio-lacustrine deposits of Çaybağı Formation, Eastern Turkey

Science.gov (United States)

Koç Taşgin, Calibe; Türkmen, İbrahim

2009-06-01

During the Neogene, both strike-slip and extensional regimes coexisted in eastern Turkey and, a number of fault-bounded basins associated with the East Anatolian Fault System developed. The Çaybağı Formation (Late Miocene-Early Pliocene) deposited in one of these basins consists of fluvio-lacustrine deposits. Numerous soft-sediment deformation structures are encountered in this formation, particularly in conglomerates, medium- to coarse-grained tuffaceous sandstones and claystones: folded structures (slumps, convolute laminations, and simple recumbent folds), water-escape structures (intruded sands, internal cusps, interpenetrative cusps and sand volcanoes), and load structures (load casts, pseudonodules, flame structures, and pillow structures). These structures are produced by liquefaction and/or fluidization of the unconsolidated sediments during a seismic shock. Consequently, the existence of seismically-induced deformation structures in the Çaybağı Formation and the association with a Neogene intraformational unconformity, growth faults, and reverse faults in the Çaybağı basin attest to the tectonic activity in this area during the Late Miocene and Early Pliocene. The East Anatolian Fault System, in particular the Uluova fault zone, is the most probable seismogenic source. Earthquakes with a magnitude of over 5 in the Richter scale can be postulated.

Assessing the impact of Syrian refugees on earthquake fatality estimations in southeast Turkey

Science.gov (United States)

Wilson, Bradley; Paradise, Thomas

2018-01-01

The influx of millions of Syrian refugees into Turkey has rapidly changed the population distribution along the Dead Sea Rift and East Anatolian fault zones. In contrast to other countries in the Middle East where refugees are accommodated in camp environments, the majority of displaced individuals in Turkey are integrated into local cities, towns, and villages - placing stress on urban settings and increasing potential exposure to strong earthquake shaking. Yet displaced populations are often unaccounted for in the census-based population models used in earthquake fatality estimations. This study creates a minimally modeled refugee gridded population model and analyzes its impact on semi-empirical fatality estimations across southeast Turkey. Daytime and nighttime fatality estimates were produced for five fault segments at earthquake magnitudes 5.8, 6.4, and 7.0. Baseline fatality estimates calculated from census-based population estimates for the study area varied in scale from tens to thousands of fatalities, with higher death totals in nighttime scenarios. Refugee fatality estimations were analyzed across 500 semi-random building occupancy distributions. Median fatality estimates for refugee populations added non-negligible contributions to earthquake fatalities at four of five fault locations, increasing total fatality estimates by 7-27 %. These findings communicate the necessity of incorporating refugee statistics into earthquake fatality estimations in southeast Turkey and the ongoing importance of placing environmental hazards in their appropriate regional and temporal context.

A Poisson method application to the assessment of the earthquake hazard in the North Anatolian Fault Zone, Turkey

Energy Technology Data Exchange (ETDEWEB)

Türker, Tuğba, E-mail: tturker@ktu.edu.tr [Karadeniz Technical University, Department of Geophysics, Trabzon/Turkey (Turkey); Bayrak, Yusuf, E-mail: ybayrak@agri.edu.tr [Ağrı İbrahim Çeçen University, Ağrı/Turkey (Turkey)

2016-04-18

North Anatolian Fault (NAF) is one from the most important strike-slip fault zones in the world and located among regions in the highest seismic activity. The NAFZ observed very large earthquakes from the past to present. The aim of this study; the important parameters of Gutenberg-Richter relationship (a and b values) estimated and this parameters taking into account, earthquakes were examined in the between years 1900-2015 for 10 different seismic source regions in the NAFZ. After that estimated occurrence probabilities and return periods of occurring earthquakes in fault zone in the next years, and is being assessed with Poisson method the earthquake hazard of the NAFZ. The Region 2 were observed the largest earthquakes for the only historical period and hasn’t been observed large earthquake for the instrumental period in this region. Two historical earthquakes (1766, M{sub S}=7.3 and 1897, M{sub S}=7.0) are included for Region 2 (Marmara Region) where a large earthquake is expected in the next years. The 10 different seismic source regions are determined the relationships between the cumulative number-magnitude which estimated a and b parameters with the equation of LogN=a-bM in the Gutenberg-Richter. A homogenous earthquake catalog for M{sub S} magnitude which is equal or larger than 4.0 is used for the time period between 1900 and 2015. The database of catalog used in the study has been created from International Seismological Center (ISC) and Boğazici University Kandilli observation and earthquake research institute (KOERI). The earthquake data were obtained until from 1900 to 1974 from KOERI and ISC until from 1974 to 2015 from KOERI. The probabilities of the earthquake occurring are estimated for the next 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100 years in the 10 different seismic source regions. The highest earthquake occur probabilities in 10 different seismic source regions in the next years estimated that the region Tokat-Erzincan (Region 9) %99

A Poisson method application to the assessment of the earthquake hazard in the North Anatolian Fault Zone, Turkey

International Nuclear Information System (INIS)

Türker, Tuğba; Bayrak, Yusuf

2016-01-01

North Anatolian Fault (NAF) is one from the most important strike-slip fault zones in the world and located among regions in the highest seismic activity. The NAFZ observed very large earthquakes from the past to present. The aim of this study; the important parameters of Gutenberg-Richter relationship (a and b values) estimated and this parameters taking into account, earthquakes were examined in the between years 1900-2015 for 10 different seismic source regions in the NAFZ. After that estimated occurrence probabilities and return periods of occurring earthquakes in fault zone in the next years, and is being assessed with Poisson method the earthquake hazard of the NAFZ. The Region 2 were observed the largest earthquakes for the only historical period and hasn’t been observed large earthquake for the instrumental period in this region. Two historical earthquakes (1766, M_S=7.3 and 1897, M_S=7.0) are included for Region 2 (Marmara Region) where a large earthquake is expected in the next years. The 10 different seismic source regions are determined the relationships between the cumulative number-magnitude which estimated a and b parameters with the equation of LogN=a-bM in the Gutenberg-Richter. A homogenous earthquake catalog for M_S magnitude which is equal or larger than 4.0 is used for the time period between 1900 and 2015. The database of catalog used in the study has been created from International Seismological Center (ISC) and Boğazici University Kandilli observation and earthquake research institute (KOERI). The earthquake data were obtained until from 1900 to 1974 from KOERI and ISC until from 1974 to 2015 from KOERI. The probabilities of the earthquake occurring are estimated for the next 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100 years in the 10 different seismic source regions. The highest earthquake occur probabilities in 10 different seismic source regions in the next years estimated that the region Tokat-Erzincan (Region 9) %99 with an earthquake

Complex Crustal Structure Beneath Western Turkey Revealed by 3D Seismic Full Waveform Inversion (FWI)

Science.gov (United States)

Cubuk-Sabuncu, Yesim; Taymaz, Tuncay; Fichtner, Andreas

2016-04-01

We present a 3D radially anisotropic velocity model of the crust and uppermost mantle structure beneath the Sea of Marmara and surroundings based on the full waveform inversion method. The intense seismic activity and crustal deformation are observed in the Northwest Turkey due to transition tectonics between the strike-slip North Anatolian Fault (NAF) and the extensional Aegean region. We have selected and simulated complete waveforms of 62 earthquakes (Mw > 4.0) occurred during 2007-2015, and recorded at (Δ Technological Research Council of Turkey (TUBITAK Project No: ÇAYDAG-114Y066), and EU-HORIZON-2020: COST Actions: Earth System Science and Environmental Management: ES1401 - Time Dependent Seismology (TIDES).

A possible cause of the Miocene uplift and volcanism in the central Anatolian plateau

Science.gov (United States)

Bartol, J.; Govers, R. M.; Wortel, M. J.

2010-12-01

During the middle and late Miocene (13-5Ma) several seemingly unrelated events occurred in central Anatolia, Turkey; (1) a new epoch of widespread volcanic activity with a mantle signature, (2) sudden uplift and disruption of a Oligocene-lower Miocene palaeo drainage system in the Western Taurus (southwest Turkey) and (3) a regional regression across southern Turkey (Antalya, Adana, Mut) coeval with volcanic activity. These observations suggest an uplift (>1000 meters) of the central Anatolian plateau by a mechanism which also triggered widespread volcanic activity. In eastern Anatolia, similar events are attributed to delamination of the lithospheric mantle [e.g. Keskin et al., 2003]. Results from tomography [W.Spakman, pers. com]) suggest that the (deeper) Bitlis slab was laterally continuous below the eastern and central Anatolian plateau. We therefore propose that the scenario developed for eastern Anatolian plateau also applies to the central Anatolian plateau. In this scenario, delamination started along the Izmir-Ankara-Erzincan suture zone and was possibly induced by remnants of a northern Neotethys slab or continental collision between Arabia and Eurasia. As the lithospheric mantle separated from the crust it sank into the asthenosphere and was replaced by hot mantle material. If true, delamination is expected to have had a thermal and isostatic imprint. Using a three-dimensional thermal-flexural model and taking changes of the effective elastic thickness due to thermal perturbation into account, we aim to quantify the possible imprints in the geological record of the central and eastern Anatolian plateau. Our model results show that delamination of the lithospheric mantle can explain the present day elevation (1500 m) of the central Anatolian plateau. For the eastern Anatolian plateau, however, delamination of the lithospheric mantle alone can only explain half (1000 m) of the present day elevation. Thickening of the eastern Anatolia crust by 1-5 km (β=1

Tomographic Imaging of the Seismic Structure Beneath the East Anatolian Plateau, Eastern Turkey

Science.gov (United States)

Gökalp, Hüseyin

2012-10-01

The high level of seismic activity in eastern Turkey is thought to be mainly associated with the continuing collision of the Arabian and Eurasian tectonic plates. The determination of a detailed three-dimensional (3D) structure is crucial for a better understanding of this on-going collision or subduction process; therefore, a body wave tomographic inversion technique was performed on the region. The tomographic inversion used high quality arrival times from earthquakes occurring in the region from 1999 to 2001 recorded by a temporary 29 station broadband IRIS-PASSCAL array operated by research groups from the Universities of Boğaziçi (Turkey) and Cornell (USA). The data was inverted and consisted of 3,114 P- and 2,298 S-wave arrival times from 252 local events with magnitudes ( M D) ranging from 2.5 to 4.8. The stability and resolution of the results were qualitatively assessed by two synthetic tests: a spike test and checkerboard resolution test and it was found that the models were well resolved for most parts of the imaged domain. The tomographic inversion results reveal significant lateral heterogeneities in the study area to a depth of ~20 km. The P- and S-wave velocity models are consistent with each other and provide evidence for marked heterogeneities in the upper crustal structure beneath eastern Turkey. One of the most important features in the acquired tomographic images is the high velocity anomalies, which are generally parallel to the main tectonic units in the region, existing at shallow depths. This may relate to the existence of ophiolitic units at shallow depths. The other feature is that low velocities are widely dispersed through the 3D structure beneath the region at deeper crustal depths. This feature can be an indicator of the mantle upwelling or support the hypothesis that the Anatolian Plateau is underlain by a partially molten uppermost mantle.

Assessing the impact of Syrian refugees on earthquake fatality estimations in southeast Turkey

Directory of Open Access Journals (Sweden)

B. Wilson

2018-01-01

Full Text Available The influx of millions of Syrian refugees into Turkey has rapidly changed the population distribution along the Dead Sea Rift and East Anatolian fault zones. In contrast to other countries in the Middle East where refugees are accommodated in camp environments, the majority of displaced individuals in Turkey are integrated into local cities, towns, and villages – placing stress on urban settings and increasing potential exposure to strong earthquake shaking. Yet displaced populations are often unaccounted for in the census-based population models used in earthquake fatality estimations. This study creates a minimally modeled refugee gridded population model and analyzes its impact on semi-empirical fatality estimations across southeast Turkey. Daytime and nighttime fatality estimates were produced for five fault segments at earthquake magnitudes 5.8, 6.4, and 7.0. Baseline fatality estimates calculated from census-based population estimates for the study area varied in scale from tens to thousands of fatalities, with higher death totals in nighttime scenarios. Refugee fatality estimations were analyzed across 500 semi-random building occupancy distributions. Median fatality estimates for refugee populations added non-negligible contributions to earthquake fatalities at four of five fault locations, increasing total fatality estimates by 7–27 %. These findings communicate the necessity of incorporating refugee statistics into earthquake fatality estimations in southeast Turkey and the ongoing importance of placing environmental hazards in their appropriate regional and temporal context.

Onset of aseismic creep on major strike-slip faults

KAUST Repository

Çakir, Ziyadin

2012-10-02

Time series analysis of spaceborne synthetic aperture radar (SAR) data, GPS measurements, and fi eld observations reveal that the central section of the Izmit (Turkey) fault that slipped with a supershear rupture velocity in the A.D. 1999, Mw7.4, Izmit earthquake began creeping aseismically following the earthquake. Rapid initial postseismic afterslip decayed logarithmically with time and appears to have reached a steady rate comparable to the preearthquake full fault-crossing rate, suggesting that it may continue for decades and possibly until late in the earthquake cycle. If confi rmed by future monitoring, these observations identify postseismic afterslip as a mechanism for initiating creep behavior along strike-slip faults. Long-term afterslip and/or creep has signifi cant implications for earthquake cycle models, recurrence intervals of large earthquakes, and accordingly, seismic hazard estimation along mature strike-slip faults, in particular for Istanbul which is believed to lie adjacent to a seismic gap along the North Anatolian fault in the Sea of Marmara. © 2012 Geological Society of America.

Onset of aseismic creep on major strike-slip faults

KAUST Repository

Ç akir, Ziyadin; Ergintav, Semih; Ö zener, Haluk; Doǧan, Uǧur; Akoglu, Ahmet; Meghraoui, Mustapha; Reilinger, Robert E.

2012-01-01

Time series analysis of spaceborne synthetic aperture radar (SAR) data, GPS measurements, and fi eld observations reveal that the central section of the Izmit (Turkey) fault that slipped with a supershear rupture velocity in the A.D. 1999, Mw7.4, Izmit earthquake began creeping aseismically following the earthquake. Rapid initial postseismic afterslip decayed logarithmically with time and appears to have reached a steady rate comparable to the preearthquake full fault-crossing rate, suggesting that it may continue for decades and possibly until late in the earthquake cycle. If confi rmed by future monitoring, these observations identify postseismic afterslip as a mechanism for initiating creep behavior along strike-slip faults. Long-term afterslip and/or creep has signifi cant implications for earthquake cycle models, recurrence intervals of large earthquakes, and accordingly, seismic hazard estimation along mature strike-slip faults, in particular for Istanbul which is believed to lie adjacent to a seismic gap along the North Anatolian fault in the Sea of Marmara. © 2012 Geological Society of America.

Tectonic implications of the 2017 Ayvacık (Çanakkale) earthquakes, Biga Peninsula, NW Turkey

Science.gov (United States)

Özden, Süha; Över, Semir; Poyraz, Selda Altuncu; Güneş, Yavuz; Pınar, Ali

2018-04-01

The west to southwestward motion of the Anatolian block results from the relative motions between the Eurasian, Arabian and African plates along the right-lateral North Anatolian Fault Zone in the north and left-lateral East Anatolian Fault Zone in the east. The Biga Peninsula is tectonically influenced by the Anatolian motion originating along the North Anatolian Fault Zone which splits into two main (northern and southern) branches in the east of Marmara region: the southern branch extends towards the Biga Peninsula which is characterized by strike-slip to oblique normal faulting stress regime in the central to northern part. The southernmost part of peninsula is characterized by a normal to oblique faulting stress regime. The analysis of both seismological and structural field data confirms the change of stress regime from strike-slip character in the center and north to normal faulting character in the south of peninsula where the earthquake swarm recently occurred. The earthquakes began on 14 January 2017 (Mw: 4.4) on Tuzla Fault and migrated southward along the Kocaköy and Babakale's stepped-normal faults of over three months. The inversion of focal mechanisms yields a normal faulting stress regime with an approximately N-S (N4°E) σ3 axis. The inversion of earthquakes occurring in central and northern Biga Peninsula and the north Aegean region gives a strike-slip stress regime with approximately WNW-ESE (N85°W) σ1 and NNE-SSW (N17°E) σ3 axis. The strike-slip stress regime is attributed to westward Anatolian motion, while the normal faulting stress regime is attributed to both the extrusion of Anatolian block and the slab-pull force of the subducting African plate along the Hellenic arc.

Prolactin-RsaI gene polymorphism in East Anatolian Red cattle in ...

African Journals Online (AJOL)

The aim of the study was to determine by Polymerase Chain Reaction-Restriction Fragment Length Polymorphism (PCR-RFLP) method the gene and genotype frequencies of PRL gene in native East Anatolian Red (EAR) cattle, which are raised as a genetic resource in Turkey. PCR-RFLP analysis involved the use of the ...

M≥7 Earthquake rupture forecast and time-dependent probability for the Sea of Marmara region, Turkey

Science.gov (United States)

Murru, Maura; Akinci, Aybige; Falcone, Guiseppe; Pucci, Stefano; Console, Rodolfo; Parsons, Thomas E.

2016-01-01

We forecast time-independent and time-dependent earthquake ruptures in the Marmara region of Turkey for the next 30 years using a new fault-segmentation model. We also augment time-dependent Brownian Passage Time (BPT) probability with static Coulomb stress changes (ΔCFF) from interacting faults. We calculate Mw > 6.5 probability from 26 individual fault sources in the Marmara region. We also consider a multisegment rupture model that allows higher-magnitude ruptures over some segments of the Northern branch of the North Anatolian Fault Zone (NNAF) beneath the Marmara Sea. A total of 10 different Mw=7.0 to Mw=8.0 multisegment ruptures are combined with the other regional faults at rates that balance the overall moment accumulation. We use Gaussian random distributions to treat parameter uncertainties (e.g., aperiodicity, maximum expected magnitude, slip rate, and consequently mean recurrence time) of the statistical distributions associated with each fault source. We then estimate uncertainties of the 30-year probability values for the next characteristic event obtained from three different models (Poisson, BPT, and BPT+ΔCFF) using a Monte Carlo procedure. The Gerede fault segment located at the eastern end of the Marmara region shows the highest 30-yr probability, with a Poisson value of 29%, and a time-dependent interaction probability of 48%. We find an aggregated 30-yr Poisson probability of M >7.3 earthquakes at Istanbul of 35%, which increases to 47% if time dependence and stress transfer are considered. We calculate a 2-fold probability gain (ratio time-dependent to time-independent) on the southern strands of the North Anatolian Fault Zone.

Delineation of major geologic structures in Turkey using SIR-B data

Science.gov (United States)

Toksoz, M. N.; Pettengill, G. H.; Ford, P.; Gulen, L.

1984-01-01

Shuttle Imaging Radar-B (SIR-B) images of well mapped segments of major faults, such as the North Anatolian Fault (NAF) and East Anatolian Fault (EAF) will be studied to identify the prominent signatures that characterize the fault zones for those specific regions. The information will be used to delineate the unmapped fault zones in areas with similar geological and geomorphological properties. The data obtained from SIR-B images will be compared and correlated with the LANDSAT thematic mapper and seismicity alignments based on well constrained earthquake epicenters.

Relaxation on the Ismetpasa segment of the North Anatolian Fault after the Golcuk Mw = 7.4 and Duzce Mw = 7.2 shocks

Directory of Open Access Journals (Sweden)

E. Koksal

2010-12-01

Full Text Available The Ismetpasa segment of the North Anatolian Fault (NAF is a rare place where aseismic fault slip (creep has been observed. Its creep behaviour has been monitored using different observation methods since the 1950s. The findings obtained from the studies until 1990s showed that the creep rate exponentially decreased before the major shocks in 1999, Golcuk (Mw = 7.4 and Duzce (Mw = 7.2. After these shocks, three GPS periods observation in 2002, 2007 and 2008 were carried out on the geodetic network established around the segment. The evaluations of these observations showed that the creep behaviour relaxed after the major earthquakes. This result demonstrates that the creep behaviour of the Ismetpasa segment might be a warning before future major earthquakes.

Mud volcano monitoring and seismic events along the North Anatolian Fault (Sea of Marmara)

Science.gov (United States)

Javad Fallahi, Mohammad; Lupi, Matteo; Mazzini, Adriano; Polonia, Alina; D'Alessandro, Antonino; D'Anna, Giuseppe; Gasperini, Luca

2017-04-01

The Sea of Marmara, a pull-apart basin formed along the northern strand of the North Anatolian Fault (NAF) system, is considered a seismic gap, that will be filled in the next decades by a large magnitude (M>7) earthquake, close to the Istanbul Metropolitan area (12 million inhabitants). For this reason, several marine geological and geophysical studies have been carried out in this region, starting from the destructive 1999 Mw 7.4 Izmit earthquake, to gather information relative to seismogenic potential of major fault strands. Together with these studies, in the frame of EC projects (i.e., MarmESONET and Marsite, among others), an intensive program of long-term monitoring of seismogenic faults was carried out using seafloor observatories deployed during several expeditions led by Italian, French and Turkish groups. These expeditions included MARM2013, on board of the R/V Urania, of the Italian CNR, when four ocean bottom seismometers (OBS) were deployed in the central part of the Sea of Marmara, at depths between 550 and 1000 m. One of the main aims of the experiment was to assess the long-term seismic activity along an active segment of the NAF, which connects the central and the western basins (depocenters), where the principal deformation zone appears relatively narrow and almost purely strike-slip. The present study shows the results of processing and analysis of continuous data records from these OBS stations during 50 days. We were able to detect seismic signal produced by an active mud volcano located close to the NAF trace, from about 3 to 6 km of distance from the OBS stations. Additionally, we captured the May 24, 2014, Mw 6.9 strike-slip earthquake occurred in the northern Aegean Sea between Greece and Turkey, which caused serious damage on the Turkish island of Imbros and the cities of Edirne and Çanakkale, as well as on the Greek island of Lemnos. The earthquake nucleated on the westward continuation of the NAF system in the NE Aegean Sea, and was

Historical evidence of faulting in Eastern Anatolia and Northern Syria

Directory of Open Access Journals (Sweden)

C. P. Melville

1995-06-01

Full Text Available Historical data show that like the North Anatolian fault zone, which was delineated by a series of earthquakes during this century from east to west, so was the conjugate Eastern Anatolian fault zone delineated from the northeast to the southwest by a succession of large earthquakes in earlier times, with a major event at its junction with the Dead Sea fault system. This event was associated with surface faulting and occurred in a region seismically quiescent for nearly two centuries.

Regional and temporal variations in CO2/3He, 3He/4He and δ13C along the North Anatolian Fault Zone, Turkey

International Nuclear Information System (INIS)

Leeuw, G.A.M. de; Hilton, D.R.; Guelec, N.; Mutlu, H.

2010-01-01

New He and C relative abundance, isotope and concentration results from nine geothermal locations situated along an 800-km transect of the North Anatolian Fault Zone (NAFZ), Turkey, that were monitored during the period November 2001-November 2004, are reported. The geothermal waters were collected every 3-6 months to study possible links between temporal geochemical variations and seismic activity along the NAFZ. At the nine sample locations, the He isotope ratios range from 0.24 to 2.3R A , δ 13 C values range from -4.5 to +5.8 per mille, and CO 2 / 3 He ratios range from 5 x 10 9 to 5 x 10 14 . The following geochemical observations are noted: (1) the highest 3 He/ 4 He ratios are found near the Galatean volcanic region, in the central section of the NAFZ, (2) at each of the nine sample locations, the 3 He/ 4 He ratios are generally constant; however, CO 2 / 3 He ratios and He contents both show one order of magnitude variability, and δ 13 C values show up to ∼4 per mille variability, and (3) at all locations (except Resadiye), δ 13 C values show positive correlations with CO 2 contents. The results indicate that at least three processes are necessary to account for the geochemical variations: (1) binary mixing between crustal and mantle-derived volatiles can explain the general characteristics of 3 He/ 4 He ratios, δ 13 C values, and CO 2 / 3 He ratios at the nine sample locations; (2) preferential degassing of He from the geothermal waters is responsible for variations in CO 2 / 3 He values and He contents at each sample location; and (3) CO 2 dissolution followed by calcite precipitation is responsible for variations in CO 2 contents and δ 13 C values at most locations. For each of the geochemical parameters, anomalies are defined in the temporal record by values that fall outside two standard deviations of average values at each specific location. Geochemical anomalies that may be related to seismic activity are recorded on June 28, 2004 at Yalova

Husbandry and Sustainability of Water Buffaloes in Turkey

Directory of Open Access Journals (Sweden)

Orhan Ermetin

2017-12-01

Full Text Available Water buffaloes in Turkey originate from Mediterranean Water Buffaloes, a subgroup of river water buffaloes and are known as Anatolian Water Buffalo. During the 1970’s the number of water buffaloes in Turkey was one million, but in 2010 this figure dropped to about 85.000. Thanks to the incentives introduced for water buffalo husbandry in recent years, the water buffalo population has risen to 143.073 heads. Water buffalo husbandry in Turkey is performed in some provinces of the Black Sea, Marmara and Central Anatolian Regions. The provinces with the highest amount of water buffalo existence are listed as Samsun, Diyarbakır, Istanbul, Tokat, Bitlis, Muş, Afyon, Kayseri, Sivas and Amasya. Breeding style in Turkey is in the form small family business, with an average of 1-5 animals per enterprise. Family enterprises are keeping water buffaloes for their own consumption. Mostly breeding in modern enterprises formed for indoor barn breeding, the size of the herds is around 50 to 100 heads. Being done only at swamps or waterfronts in the past, water buffalo husbandry increasingly takes place in modern facilities nowadays. The colour of Anatolian Water Buffaloes is generally black and their horns curved backwards, are called arch horns in Turkey. The lactation milk yield and lactation length in Anatolian Water Buffaloes are between 800 and 1100 kg and about 180-280 days respectively. It is demonstrated that they varied according to effects of environmental factors, care and feeding. Adult water buffalo’s live weight is about 411-518 kg. The first insemination age of water buffalo is 32 to 43 months and during a lifespan the number of lactation periods is 5 to 10. For adult water buffalo at withers the height of females is being expressed as around 135 cm. Calves are generally breastfed for 3-4 months. Generally, water buffaloes are milked twice a day in the village farms by hand.

Constraints on fluid origins and migration velocities along the Marmara Main Fault (Sea of Marmara, Turkey) using helium isotopes

Science.gov (United States)

Burnard, P.; Bourlange, S.; Henry, P.; Geli, L.; Tryon, M. D.; Natal'in, B.; Sengör, A. M. C.; Özeren, M. S.; Çagatay, M. N.

2012-08-01

Fluids venting from the submarine portion of the Marmara Main Fault (part of the North Anatolian Fault system, Turkey) were sampled in Ti bottles deployed by submersible. The fluids consist of mixtures of fault derived gases, fault related cold seep fluids, and ambient seawater; these components can readily be distinguished using the isotopes of He and the He/Ne ratios. 3He/4He ratios range between 0.03±0.1 and 4.9±0.4 Ra, indicating that both crustal and mantle derived sources of helium are sampled by the fault. The dominant gas in all the samples analyzed is methane with the abundance of CO2 below detection (≤2%) in the mantle rich (high 3He/4He) fluids. This is in contrast to nearly all mantle derived fluids where the C species are dominated by CO2. While high CH4/CO2 ratios may reflect organic or inorganic reactions within the crust which reduce mantle derived CO2 to methane, this is not a priori necessary: we show that simple dilution of mantle fluids with methane produced within local sediments could result in the high 3He/4He, methane rich gases currently emanating from the fault. This observation is supported by an anticorrelation between 3He/4He and C/3He, which is consistent with addition of C and 4He simultaneously to the fluids. The highest 3He/4He ratios were found in the Tekirdag Basin, at the foot of the escarpment bordering the Western Sea of Marmara, where seismic data are consistent with the presence of a fault network at depth which could provide conduits permitting deep-seated fluids to rise to the surface. The lack of recent volcanism, or any evidence of underlying magmatism in the area, along with low temperature fluids, strongly suggests that the 3He-rich helium in these fluids was derived from the mantle itself with the Marmara Main Fault providing a high permeability conduit from the mantle to the surface. Assuming that the mantle source to the fluids originally had a 3He/4He ratio of 6 Ra, the minimum fluid velocities (considering only

Comparision of the different probability distributions for earthquake hazard assessment in the North Anatolian Fault Zone

Energy Technology Data Exchange (ETDEWEB)

Yilmaz, Şeyda, E-mail: seydayilmaz@ktu.edu.tr; Bayrak, Erdem, E-mail: erdmbyrk@gmail.com [Karadeniz Technical University, Trabzon (Turkey); Bayrak, Yusuf, E-mail: bayrak@ktu.edu.tr [Ağrı İbrahim Çeçen University, Ağrı (Turkey)

2016-04-18

In this study we examined and compared the three different probabilistic distribution methods for determining the best suitable model in probabilistic assessment of earthquake hazards. We analyzed a reliable homogeneous earthquake catalogue between a time period 1900-2015 for magnitude M ≥ 6.0 and estimated the probabilistic seismic hazard in the North Anatolian Fault zone (39°-41° N 30°-40° E) using three distribution methods namely Weibull distribution, Frechet distribution and three-parameter Weibull distribution. The distribution parameters suitability was evaluated Kolmogorov-Smirnov (K-S) goodness-of-fit test. We also compared the estimated cumulative probability and the conditional probabilities of occurrence of earthquakes for different elapsed time using these three distribution methods. We used Easyfit and Matlab software to calculate these distribution parameters and plotted the conditional probability curves. We concluded that the Weibull distribution method was the most suitable than other distribution methods in this region.

Fractal properties and simulation of micro-seismicity for seismic hazard analysis: a comparison of North Anatolian and San Andreas Fault Zones

Directory of Open Access Journals (Sweden)

Naside Ozer

2012-02-01

Full Text Available We analyzed statistical properties of earthquakes in western Anatolia as well as the North Anatolian Fault Zone (NAFZ in terms of spatio-temporal variations of fractal dimensions, p- and b-values. During statistically homogeneous periods characterized by closer fractal dimension values, we propose that occurrence of relatively larger shocks (M >= 5.0 is unlikely. Decreases in seismic activity in such intervals result in spatial b-value distributions that are primarily stable. Fractal dimensions decrease with time in proportion to increasing seismicity. Conversely, no spatiotemporal patterns were observed for p-value changes. In order to evaluate failure probabilities and simulate earthquake occurrence in the western NAFZ, we applied a modified version of the renormalization group method. Assuming an increase in small earthquakes is indicative of larger shocks, we apply the mentioned model to micro-seismic (M<= 3.0 activity, and test our results using San Andreas Fault Zone (SAFZ data. We propose that fractal dimension is a direct indicator of material heterogeneity and strength. Results from a model suggest simulated and observed earthquake occurrences are coherent, and may be used for seismic hazard estimation on creeping strike-slip fault zones.

Shaded Relief and Radar Image with Color as Height, Bosporus Strait and Istanbul, Turkey

Science.gov (United States)

2002-01-01

The Bosporus (also spelled Bosphorus) is a strait that connects the Black Sea with the Sea of Marmara in the center of this view of northwest Turkey, taken during the Shuttle Radar Topography Mission. The water of the Black Sea at the top of the image and Sea of Marmara below the center are colored blue in this image, along with several large lakes. The largest lake, to the lower right of the Sea of Marmara, is Iznik Lake. The Bosporus (Turkish Bogazici) Strait is considered to be the boundary between Europe and Asia, and the large city of Istanbul, Turkey is located on both sides of the southern end of the strait, visible as a brighter (light green to white) area on the image due to its stronger reflection of radar. Istanbul is the modern name for a city with along history, previously called Constantinople and Byzantium. It was rebuilt as the capital of the Roman Empire in 330 A.D. by Constantine on the site of an earlier Greek city, and it was later the capital of the Byzantine and Ottoman empires until 1922.The Gulf of Izmit is the narrow gulf extending to the east (right) from the Sea of Marmara. The city of Izmit at the end of the gulf was heavily damaged by a large magnitude 7.4 earthquake on August 17,1999, often called the Izmit earthquake (also known as the Kocaeli, Turkey, earthquake), that killed at least 17,000 people. A previous earthquake under the Gulf of Izmit in 1754 killed at least 2,000people. The Izmit earthquake ruptured a long section of the North Anatolian Fault system from off the right side of this image continuing under the Gulf of Izmit. Another strand of the North Anatolian Fault system is visible as a sharp linear feature in the topography south of Iznik Lake. Bathymetric surveys show that the north Anatolian Fault system extends beneath and has formed the Sea of Marmara, in addition to the Gulf of Izmit and Iznik Lake. Scientists are studying the North Anatolian Fault system to determine the risk of a large earthquake on the faults

Cenozoic extensional tectonics of the Western Anatolia Extended Terrane, Turkey

International Nuclear Information System (INIS)

Cemen, I; Catlos, E J; Gogus, O; Diniz, E; Hancer, M

2008-01-01

The Western Anatolia Extended Terrane in Turkey is located on the eastern side of the Aegean Extended Terrane and contains one of the largest metamorphic core complexes in the world, the Menderes massif. It has experienced a series of continental collisions from the Late Cretaceous to the Eocene during the formation of the Izmir-Ankara-Erzincan suture zone. Based our field work and monazite ages, we suggest that the north-directed postcollisional Cenozoic extension in the region is the product of three consecutive stages, triggered by three different mechanisms. The first stage was initiated about 30 Ma ago, in the Oligocene by the Orogenic Collapse the thermally weakened continental crust along the north-dipping Southwest Anatolian shear zone. The shear zone was formed as an extensional simple-shear zone with listric geometry at depth and exhibits predominantly normal-slip along its southwestern end. But, it becomes a high-angle oblique-slip shear zone along its northeastern termination. Evidence for the presence of the shear zone includes (1) the dominant top to the north-northeast shear sense indicators throughout the Menderes massif, such as stretching lineations trending N10E to N30E; and (2) a series of Oligocene extensional basins located adjacent to the shear zone that contain only carbonate and ophiolitic rock fragments, but no high grade metamorphic rock fragments. During this stage, erosion and extensional unroofing brought high-grade metamorphic rocks of the Central Menderes massif to the surface by the early Miocene. The second stage of the extension was triggered by subduction roll-back and associated back-arc extension in the early Miocene and produced the north-dipping Alasehir and the south-dipping Bueyuek Menderes detachments of the central Menderes massif and the north-dipping Simav detachment of the northern Menderes massif. The detachments control the Miocene sedimentation in the Alasehir, Bueyuek Menderes, and Simav grabens, containing high

Crustal structure at the western end of the North Anatolian Fault Zone from deep seismic sounding

Directory of Open Access Journals (Sweden)

B. Baier

2001-06-01

Full Text Available The first deep seismic sounding experiment in Northwestern Anatolia was carried out in October 1991 as part of the "German - Turkish Project on Earthquake Prediction Research" in the Mudurnu area of the North Anatolian Fault Zone. The experiment was a joint enterprise by the Institute of Meteorology and Geophysics of Frankfurt University, the Earthquake Research Institute (ERI in Ankara, and the Turkish Oil Company (TPAO. Two orthogonal profiles, each 120 km in length with a crossing point near Akyazi, were covered in succession by 30 short period tape recording seismograph stations with 2 km station spacing. 12 shots, with charge sizes between 100 and 250 kg, were fired and 342 seismograms out of 360 were used for evaluation. By coincidence an M b = 4.5 earthquake located below Imroz Island was also recorded and provided additional information on Moho and the sub-Moho velocity. A ray tracing method orginally developed by Weber (1986 was used for travel time inversion. From a compilation of all data two generalized crustal models were derived, one with velocity gradients within the layers and one with constant layer velocities. The latter consists of a sediment cover of about 2 km with V p » 3.6 km/s, an upper crystalline crust down to 13 km with V p » 5.9 km/s, a middle crust down to 25 km depth with V p » 6.5 km/s, a lower crust down to 39 km Moho depth with V p » 7.0 km/s and V p » 8.05 km/s below the Moho. The structure of the individual profiles differs slightly. The thickest sediment cover is reached in the Izmit-Sapanca-trough and in the Akyazi basin. Of particular interest is a step of about 4 km in the lower crust near Lake Sapanca and probably an even larger one in the Moho (derived from the Imroz earthquake data. After the catastrophic earthquake of Izmit on 17 August 1999 this significant heterogeneity in crustal structure appears in a new light with regard to the possible cause of the Izmit earthquake. Heterogeneities in

Undersea acoustic telemetry across the North Anatolian Fault, Marmara Sea: results from the first 6 months of monitoring of the fault displacement

Science.gov (United States)

Royer, J. Y.; Deschamps, A.; Piete, H.; Sakic, P.; Ballu, V.; Apprioual, R.; Kopp, H.; Lange, D.; Ruffine, L.; Géli, L.

2015-12-01

Located in the Marmara Sea, the Istanbul-Silivri segment of the North Anatolian Fault (NAF) is known to be a seismic gap since 1766, although, in the last century, the NAF has caused major devastating earthquakes over most of its extent. This fault segment, void of seismicity, may be either creeping aseismically or blocked and accumulating enough strain to produce an earthquake of magnitude 7 or greater. This section of the NAF may thus represent a major seismic and tsunamigenic hazard for the Istanbul megalopolis, located only 40 km away. The objective of the MARSITE project, funded by the European Union and coordinated by the Observatory of the University of Kandilli (KOERI), is to determine the blocking state of the Istanbul-Silivri fault segment. In this context, an array of 10 acoustic transponders has been deployed on either sides of the fault, in the eastern part of the Kumburgaz Basin, to measure the displacements of the fault over a period of 3 to 5 years. The telemetric beacons (4 from the University of Brest and 6 from the GEOMAR Institute in Kiel) form two arrays fitted in one another. The principle of the experiment is to repeatedly measure the distance (ie two-way-travel time of acoustic pings) between pairs of beacons and thus to monitor the deformation of an array of 9 baselines, 500m to 3000m long, of which 5 cross obliquely the assumed fault trace. The French and German arrays are independent but ensure a redundancy of rangings along common baselines. Each acoustic transponder also monitors the temperature, pressure, sound-velocity and attitude (tiltmeters), every one or two hours. Data are stored in each beacon and can be downloaded from the surface using an acoustic modem. We present here the first 6 months of recording by the French array, from November 1st, 2014 to April 25, 2015. All acoustic transponders worked nominally for 6 months and appear to have remained stable on the seafloor. Recorded sea-bottom temperatures provide evidence for

Earthquake Swarm in Armutlu Peninsula, Eastern Marmara Region, Turkey

Science.gov (United States)

Yavuz, Evrim; Çaka, Deniz; Tunç, Berna; Serkan Irmak, T.; Woith, Heiko; Cesca, Simone; Lühr, Birger-Gottfried; Barış, Şerif

2015-04-01

The most active fault system of Turkey is North Anatolian Fault Zone and caused two large earthquakes in 1999. These two earthquakes affected the eastern Marmara region destructively. Unbroken part of the North Anatolian Fault Zone crosses north of Armutlu Peninsula on east-west direction. This branch has been also located quite close to Istanbul known as a megacity with its high population, economic and social aspects. A new cluster of microseismic activity occurred in the direct vicinity southeastern of the Yalova Termal area. Activity started on August 2, 2014 with a series of micro events, and then on August 3, 2014 a local magnitude is 4.1 event occurred, more than 1000 in the followed until August 31, 2014. Thus we call this tentatively a swarm-like activity. Therefore, investigation of the micro-earthquake activity of the Armutlu Peninsula has become important to understand the relationship between the occurrence of micro-earthquakes and the tectonic structure of the region. For these reasons, Armutlu Network (ARNET), installed end of 2005 and equipped with currently 27 active seismic stations operating by Kocaeli University Earth and Space Sciences Research Center (ESSRC) and Helmholtz-Zentrum Potsdam Deutsches GeoForschungsZentrum (GFZ), is a very dense network tool able to record even micro-earthquakes in this region. In the 30 days period of August 02 to 31, 2014 Kandilli Observatory and Earthquake Research Institute (KOERI) announced 120 local earthquakes ranging magnitudes between 0.7 and 4.1, but ARNET provided more than 1000 earthquakes for analyzes at the same time period. In this study, earthquakes of the swarm area and vicinity regions determined by ARNET were investigated. The focal mechanism of the August 03, 2014 22:22:42 (GMT) earthquake with local magnitude (Ml) 4.0 is obtained by the moment tensor solution. According to the solution, it discriminates a normal faulting with dextral component. The obtained focal mechanism solution is

Temporal variations of the fractal properties of seismicity in the western part of the north Anatolian fault zone: possible artifacts due to improvements in station coverage

Directory of Open Access Journals (Sweden)

A. O. Öncel

1995-01-01

Full Text Available Seismically-active fault zones are complex natural systems exhibiting scale-invariant or fractal correlation between earthquakes in space and time, and a power-law scaling of fault length or earthquake source dimension consistent with the exponent b of the Gutenberg-Richter frequency-magnitude relation. The fractal dimension of seismicity is a measure of the degree of both the heterogeneity of the process (whether fixed or self-generated and the clustering of seismic activity. Temporal variations of the b-value and the two-point fractal (correlation dimension Dc have been related to the preparation process for natural earthquakes and rock fracture in the laboratory These statistical scaling properties of seismicity may therefore have the potential at least to be sensitive short- term predictors of major earthquakes. The North Anatolian Fault Zone (NAFZ is a seismicallyactive dextral strike slip fault zone which forms the northern boundary of the westward moving Anatolian plate. It is splayed into three branches at about 31oE and continues westward toward the northern Aegean sea. In this study, we investigate the temporal variation of Dc and the Gutenberg-Richter b-value for seismicity in the western part of the NAFZ (including the northern Aegean sea for earthquakes of Ms > 4.5 occurring in the period between 1900 and 1992. b ranges from 0.6-1.6 and Dc from 0.6 to 1.4. The b-value is found to be weakly negatively correlated with Dc (r=-0.56. However the (log of event rate N is positively correlated with b, with a similar degree of statistical significance (r=0.42, and negatively correlated with Dc (r=-0.48. Since N increases dramatically with improved station coverage since 1970, the observed negative correlation between b and Dc is therefore more likely to be due to this effect than any underlying physical process in this case. We present this as an example of how man-made artefacts of recording can have similar statistical effects to

Determination of Toll-Like Receptor 1 Gene Polymorphisms in Zavot, Turkish Grey, East Anatolian Red, Anatolian Black and South Anatolian Red Cattle Breeds

OpenAIRE

Mehmet Ulaş Çınar; Korhan Arslan; Esma Gamze Ilgar; Bilal Akyüz

2016-01-01

Toll-like receptors (TLRs) play an important role in non-specific immunity against different infectious agents such as bacterium or parasite. The aim of this work was to investigate the allele and genotype frequencies of three single-nucleotide polymorphisms (SNPs) in bovine TLR1 gene in native Turkish cattle breeds. DNA samples were extracted using the phenol chloroform protocol from 77 Zavot, 60 Turkish Grey, 51 East Anatolian Red, 69 Anatolian Black and 46 South Anatolian Red cattle. Targe...

An L-band interferometric synthetic aperture radar study on the Ganos section of the north Anatolian fault zone between 2007 and 2011: Evidence for along strike segmentation and creep in a shallow fault patch.

Science.gov (United States)

de Michele, Marcello; Ergintav, Semih; Aochi, Hideo; Raucoules, Daniel

2017-01-01

We utilize L-band interferometric synthetic aperture radar (InSAR) data in this study to retrieve a ground velocity map for the near field of the Ganos section of the north Anatolian fault (NAF) zone. The segmentation and creep distribution of this section, which last ruptured in 1912 to generate a moment magnitude (Mw)7.3 earthquake, remains incompletely understood. Because InSAR processing removes the mean orbital plane, we do not investigate large scale displacements due to regional tectonics in this study as these can be determined using global positioning system (GPS) data, instead concentrating on the close-to-the-fault displacement field. Our aim is to determine whether, or not, it is possible to retrieve robust near field velocity maps from stacking L-band interferograms, combining both single and dual polarization SAR data. In addition, we discuss whether a crustal velocity map can be used to complement GPS observations in an attempt to discriminate the present-day surface displacement of the Ganos fault (GF) across multiple segments. Finally, we characterize the spatial distribution of creep on shallow patches along multiple along-strike segments at shallow depths. Our results suggest the presence of fault segmentation along strike as well as creep on the shallow part of the fault (i.e. the existence of a shallow creeping patch) or the presence of a smoother section on the fault plane. Data imply a heterogeneous fault plane with more complex mechanics than previously thought. Because this study improves our knowledge of the mechanisms underlying the GF, our results have implications for local seismic hazard assessment.

Satellite Geodetic Constraints On Earthquake Processes: Implications of the 1999 Turkish Earthquakes for Fault Mechanics and Seismic Hazards on the San Andreas Fault

Science.gov (United States)

Reilinger, Robert

2005-01-01

Our principal activities during the initial phase of this project include: 1) Continued monitoring of postseismic deformation for the 1999 Izmit and Duzce, Turkey earthquakes from repeated GPS survey measurements and expansion of the Marmara Continuous GPS Network (MAGNET), 2) Establishing three North Anatolian fault crossing profiles (10 sitedprofile) at locations that experienced major surface-fault earthquakes at different times in the past to examine strain accumulation as a function of time in the earthquake cycle (2004), 3) Repeat observations of selected sites in the fault-crossing profiles (2005), 4) Repeat surveys of the Marmara GPS network to continue to monitor postseismic deformation, 5) Refining block models for the Marmara Sea seismic gap area to better understand earthquake hazards in the Greater Istanbul area, 6) Continuing development of models for afterslip and distributed viscoelastic deformation for the earthquake cycle. We are keeping close contact with MIT colleagues (Brad Hager, and Eric Hetland) who are developing models for S. California and for the earthquake cycle in general (Hetland, 2006). In addition, our Turkish partners at the Marmara Research Center have undertaken repeat, micro-gravity measurements at the MAGNET sites and have provided us estimates of gravity change during the period 2003 - 2005.

The 2014 Mw6.9 Gokceada and 2017 Mw6.3 Lesvos Earthquakes in the Northern Aegean Sea: The Transition from Right-Lateral Strike-Slip Faulting on the North Anatolian Fault to Extension in the Central Aegean

Science.gov (United States)

Cetin, S.; Konca, A. O.; Dogan, U.; Floyd, M.; Karabulut, H.; Ergintav, S.; Ganas, A.; Paradisis, D.; King, R. W.; Reilinger, R. E.

2017-12-01

The 2014 Mw6.9 Gokceada (strike-slip) and 2017 Mw6.3 Lesvos (normal) earthquakes represent two of the set of faults that accommodate the transition from right-lateral strike-slip faulting on the North Anatolian Fault (NAF) to normal faulting along the Gulf of Corinth. The Gokceada earthquake was a purely strike-slip event on the western extension of the NAF where it enters the northern Aegean Sea. The Lesvos earthquake, located roughly 200 km south of Gokceada, occurred on a WNW-ESE-striking normal fault. Both earthquakes respond to the same regional stress field, as indicated by their sub-parallel seismic tension axis and far-field coseismic GPS displacements. Interpretation of GPS-derived velocities, active faults, crustal seismicity, and earthquake focal mechanisms in the northern Aegean indicates that this pattern of complementary faulting, involving WNW-ESE-striking normal faults (e.g. Lesvos earthquake) and SW-NE-striking strike-slip faults (e.g. Gokceada earthquake), persists across the full extent of the northern Aegean Sea. The combination of these two "families" of faults, combined with some systems of conjugate left-lateral strike-slip faults, complement one another and culminate in the purely extensional rift structures that form the large Gulfs of Evvia and Corinth. In addition to being consistent with seismic and geodetic observations, these fault geometries explain the increasing velocity of the southern Aegean and Peloponnese regions towards the Hellenic subduction zone. Alignment of geodetic extension and seismic tension axes with motion of the southern Aegean towards the Hellenic subduction zone suggests a direct association of Aegean extension with subduction, possibly by trench retreat, as has been suggested by prior investigators.

August 1999 Izmit (Kocaeli), Turkey Images

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — On August 17, 1999, at 3:02 am local time (00:02 GMT) a magnitude (Mw) 7.4 earthquake occurred on the northern Anatolian fault. The epicenter was located very close...

Shear wave velocity structure of the Anatolian Plate and surrounding regions using Ambient Noise Tomography

Science.gov (United States)

Delph, J. R.; Beck, S. L.; Zandt, G.; Biryol, C. B.; Ward, K. M.

2013-12-01

The Anatolian Plate consists of various lithospheric terranes amalgamated during the closure of the Tethys Ocean, and is currently extruding to the west in response to a combination of the collision of the Arabian plate in the east and the roll back of the Aegean subduction zone in the west. We used Ambient Noise Tomography (ANT) at periods structure of the Anatolian Plate. We computed a total of 13,779 unique cross-correlations using one sample-per-second vertical component broadband seismic data from 215 stations from 8 different networks over a period of 7 years to compute fundamental-mode Rayleigh wave dispersion curves following the method of Benson et al. (2007). We then inverted the dispersion data to calculate phase velocity maps for 11 periods from 8 s - 40 s throughout Anatolia and the Aegean regions (Barmin et al. 2001). Using smoothed Moho values derived from Vanacore et al. (2013) in our starting models, we inverted our dispersion curves using a linear least-squares iterative inversion scheme (Herrmann & Ammon 2004) to produce a 3-D shear-wave velocity model of the crust and uppermost mantle throughout Anatolia and the Aegean. We find a good correlation between our seismic shear wave velocities and paleostructures (suture zones) and modern deformation (basin formation and fault deformation). The most prominent crustal velocity contrasts occur across intercontinental sutures zones, resulting from the juxtaposition of the compositionally different basements of the amalgamated terranes. At shallow depths, seismic velocity contrasts correspond closely with surficial features. The Thrace, Cankiri and Tuz Golu basins, and accretionary complexes related to the closure of the Neotethys are characterized by slow shear wave velocities, while the Menderes and Kirsehir Massifs, Pontides, and Istanbul Zone are characterized by fast velocities. We find that the East Anatolia Plateau has slow shear-wave velocities, as expected due to high heat flow and active

Neogene volcanism and extension in Western Anatolian-Aegean area: A new geodynamic model

Energy Technology Data Exchange (ETDEWEB)

Agostini, S; Tonarini, S [Istituto di Geoscienze e Georisorse, Consiglio Nazionale delle Ricerche, Via G. Moruzzi 1, 56124 Pisa (Italy); Doglioni, C [Dipartimento di Scienze della Terra, Universita La Sapienza, Roma (Italy); Innocenti, F [Dipartimento di Scienze della Terra, Universita di Pisa, Pisa (Italy); Manetti, P [Dipartimento di Scienze della Terra, Universita di Firenze, Firenze (Italy)], E-mail: s.agostini@igg.cnr.it

2008-07-01

The widespread Western Anatolian-Aegean Neogene volcanism presents a complex geochemical evolution reflecting the uncommon space-time variability of the geodynamic setting of the region. In the Western Anatolian and Central Aegean, a widespread supra-subduction magmatism, with calc-alkaline to shoshonitic affinity, took place from Early to Middle Miocene; this phase of activity ends with spots of ultra-K lavas and dykes. From Late Miocene onwards scattered alkali basaltic lavas with intraplate affinity were emitted, while calc-alkaline activity occurred in the South Aegean arc. Since Late Oligocene-Early Miocene, the region was, and still is, affected by extensional tectonics generally ascribed to a backarc rift. However the Aegean region should rather be considered as an unconventional backarc since its characteristics rather differ from 'typical' backarcs. In fact, in spite of a long lasting(>40Ma) active NE-directed subduction of Africa, the backarc area still maintains a relatively thick continental crust (>20-25 km). Moreover, the upper Eurasian plate is overriding the lower Africa plate with separate segments, with Greece moving faster, and Turkey moving slower. The differential velocity between Greece and Turkey determines extension in the upper plate, unrelated to the loss of subducted retreating lithosphere, which is the usual setting for the origin of 'classic' backarc settings. The geodynamic framework is supported by the geochemical and isotopic features of the supra-subduction magmas revealing the occurrence of a trapped, drying slab, with progressive decreasing of Fluid Mobile Elements/Fluid Immobile Elements ratios, {delta}{sup 11}B and {delta}{sup 7}Li, coupled with scarce variations of Sr and Nd isotopes. Moreover, the differential motion between the Greek and Anatolian micro-plates creates tear zones with the formation of slab ruptures or vertical slab windows. The occurrence of such windows is, in fact, outlined by the

Palaeomagnetism and magnetic properties of the Cappadocian ignimbrite succession, central Turkey and Neogene tectonics of the Anatolian collage

Science.gov (United States)

Piper, J. D. A.; Gürsoy, H.; Tatar, O.

2002-10-01

The Cappadocian ignimbrite succession of central-southern Anatolia comprises at least nine major and two minor calc-alkaline rhyolitic sheets emplaced at 1-2-Ma intervals between 11.2 and 1.1 Ma. It records the last phase of Neotethyan subduction during final emplacement of the Tauride orogen in southern Turkey. This study reports magnetostratigraphy and describes associated rock magnetic properties. Remanence resides in Ti-poor titanomagnetites. Haematisation is locally produced by post-emplacement oxidation but does not contribute significantly to the palaeomagnetic signature although secondary processes within the ignimbrite sheets have produced composite isothermal remanent magnetisation spectra and variable intensities of magnetisation. Weak anisotropy of magnetic susceptibility describes tensors with maximum axes close to bedding and minimum axes perpendicular to this plane. Directions of kmax with weak imbrication mostly suggest flow away from centres of eruption located by gravity and remote sensing. Older ignimbrites (Upper and Lower Göreme, Akdag-Zelve) from the Çardak Centre are all of normal polarity. Later ignimbrites, partly erupted from the Derinkuyu Centre, comprise the Sarımaden (R), Cemilköy (R), Tahar (R), Kızılkaya (R), Incesu (N) and Valibaba-Sofular (R) ignimbrites. The overall (reversed) group mean is D/ I=174/-51° ( N=10 units, R=9.84, α95=6.6°, k=55) and all magnetisation directions from the Upper Göreme (9.0 Ma) onwards are rotated anticlockwise with respect to Eurasian and African palaeofields. This sense of rotation characterises most of central Anatolia and averages 9±5° in this sector. The rotation rate from 8 to 1 Ma BP was ˜1.25°/Ma but it appears to have accelerated during the latter part of the Quaternary to about an order higher than rates determined from GPS. Rotation has resulted from extrusion of fault blocks during tectonic escape of the Anatolian collage to the southwest and followed crustal thickening as the

Seismically-triggered organic-rich layers in recent sediments from Göllüköy Lake (North Anatolian Fault, Turkey)

KAUST Repository

Avsar, Ulas; Hubert-Ferrari, Auré lia; De Batist, Marc; Lepoint, Gilles; Schmidt, Sabine; Fagel, Nathalie

2014-01-01

Multi-proxy analyses on the sedimentary sequence of Göllüköy Lake, which is located on the eastern North Anatolian Fault (NAF), reveals a complete and high-resolution paleoseismic record for the last 650 years. Six sedimentary events are detected in a 3.1 m-long piston core. They form distinct organic-rich intercalations within the background sedimentation, which are characterized by strong anomalies on the loss-on-ignition (LOI550) and total organic carbon (TOC) profiles, as well as by lighter colours on the X-ray radiographic images. Itrax micro-XRF core scanner data are also used to contribute to the detection and characterization of the event deposits. After the detection of the sedimentary events, their temporal correlation with the earthquakes in the historical seismicity catalogue of the NAF is tested. The youngest event is dated to 1940s by using 210Pb and 137Cs profiles in sediment, which coincides with the 1939 earthquake (Ms = 7.7) on the NAF. The ages of the older five events are determined based on radiocarbon dating and regional time–stratigraphic correlation. Radiocarbon dating on the bulk sediment samples does not provide reliable results due to hard-water effect. On the other hand, dating on charcoals, Ephippia of Daphnia and phragmite remains significantly improves the results and implies a mean sedimentation rate of 0.28 cm/yr. Based on this preliminary sedimentation rate, we show that organic matter content variations through our record correlate with the varve-based δ18O record of Nar Lake, which is located 350 km southwest of Göllüköy Lake. Accordingly, high-precipitation/low-evaporation climatic episodes detected in Nar Lake are represented by higher organic matter content in Göllüköy sediments. Fine-tuning the Göllüköy LOI550 record to the Nar δ18O record reveals that the ages of the sedimentary events in Göllüköy match with well-known historical earthquakes that occurred around the lake. Finally, the origin of the organic

Seismically-triggered organic-rich layers in recent sediments from Göllüköy Lake (North Anatolian Fault, Turkey)

KAUST Repository

Avsar, Ulas

2014-09-29

Multi-proxy analyses on the sedimentary sequence of Göllüköy Lake, which is located on the eastern North Anatolian Fault (NAF), reveals a complete and high-resolution paleoseismic record for the last 650 years. Six sedimentary events are detected in a 3.1 m-long piston core. They form distinct organic-rich intercalations within the background sedimentation, which are characterized by strong anomalies on the loss-on-ignition (LOI550) and total organic carbon (TOC) profiles, as well as by lighter colours on the X-ray radiographic images. Itrax micro-XRF core scanner data are also used to contribute to the detection and characterization of the event deposits. After the detection of the sedimentary events, their temporal correlation with the earthquakes in the historical seismicity catalogue of the NAF is tested. The youngest event is dated to 1940s by using 210Pb and 137Cs profiles in sediment, which coincides with the 1939 earthquake (Ms = 7.7) on the NAF. The ages of the older five events are determined based on radiocarbon dating and regional time–stratigraphic correlation. Radiocarbon dating on the bulk sediment samples does not provide reliable results due to hard-water effect. On the other hand, dating on charcoals, Ephippia of Daphnia and phragmite remains significantly improves the results and implies a mean sedimentation rate of 0.28 cm/yr. Based on this preliminary sedimentation rate, we show that organic matter content variations through our record correlate with the varve-based δ18O record of Nar Lake, which is located 350 km southwest of Göllüköy Lake. Accordingly, high-precipitation/low-evaporation climatic episodes detected in Nar Lake are represented by higher organic matter content in Göllüköy sediments. Fine-tuning the Göllüköy LOI550 record to the Nar δ18O record reveals that the ages of the sedimentary events in Göllüköy match with well-known historical earthquakes that occurred around the lake. Finally, the origin of the organic

The 2005 - 2007 Bala (Ankara, central Turkey) earthquakes: a case study for strike-slip fault terminations

OpenAIRE

Esat, K.; Çivgin, B.; Kaypak, B.; Isik, V.; Ecevitoglu, B.; Seyitoglu, G.

2014-01-01

An intense seismic activity has been observed after the Bala (Ankara, NW central Turkey) earthquakes (30 July 2005: Mw=5.3, 20 December 2007: Mw=5.4, and 26 December 2007: Mw=5.3), continuing up to the present. The epicenters and the focal mechanism solutions of the earthquakes indicate that the right lateral strike-slip Afşar fault, trending N55-60°W, is responsible for the main shocks. The Afşar fault is thought to be the NW continuation of the Tuzgölü fault zone, which is one of the main n...

Geothermal energy development in Turkey

International Nuclear Information System (INIS)

Simsek, S.; Okandan, E.

1990-01-01

Geothermal fields in Turkey are related to rather complex zones of collision between the Eurasian and African continents, and penetration of the Arabian plate into the Anatolian continental mass. These processes gave rise to fracturing of the lithosphere and eruption of magmas. Geothermal regional assessment studies have proven several low enthalpy sources and some high enthalpy fields suitable for electricity generation. This paper summarizes developments in exploration-drilling and give examples of direct utilization implemented in recent years

Highly calcareous lacustrine soils in the Great Konya Basin, Turkey

NARCIS (Netherlands)

Meester, de T.

1971-01-01

The Great Konya Basin is in the south of the Central Anatolian Plateau in Turkey. It is a depression without outlet to the sea. The central part of the Basin is the floor of a former Pleistocene lake, the Ancient Konya Lake. This area, called the Lacustrine
Plain, has highly calcareous

Reconciling the geological history of western Turkey with plate circuits and mantle tomography

Science.gov (United States)

Kaymakci, N.; van Hinsbergen, D. J.; Spakman, W.; Torsvik, T. H.

2010-12-01

We place the geological history since Cretaceous times in western Turkey in a context of convergence, subduction, collision and slab break-off. To this end, we compare the west Anatolian geological history with amounts of Africa-Europe convergence calculated from the Atlantic plate circuit, and the seismic tomography images of the west Anatolian mantle structure. Western Turkish geology reflects the convergence between the Sakarya continent (here treated as Eurasia) in the north and Africa in the south, with the Anatolide-Tauride Block (ATB) between two strands of the Neotethyan ocean. Convergence between the Sakarya and the ATB started at least ~95-90Myr ago, marked by ages of metamorphic soles of ophiolites that form the highest structural unit below Sakarya. These are underlain by high-pressure, low-temperature metamorphic rocks of the Tavsanli and Afyon zones, and the Ören Unit, which in turn are underlain by the Menderes Massif derived from the ATB. Underthrusting of the ATB below Sakarya was since ~50Ma, associated with high-temperature metamorphism and widespread granitic magmatism. Thrusting in the Menderes Massif continued until 35 Ma, after which there is no record of accretion in western Turkey. Plate circuits show that since 90 Ma, ~1400 km of Africa-Europe convergence occurred, of which ~700 km since 50 Ma and ~450 km since 35Ma. Seismic tomography shows that the African slab under western Turkey is decoupled from the African Plate. This detached slab is a single, coherent body, representing the lithosphere consumed since 90 Ma. There was no subduction re-initiation after slab break-off. ATB collision with Europe therefore did not immediately lead to slab break-off but instead to delamination of subducting lithospheric mantle from accreting ATB crust, while staying attached to the African Plate. This led to asthenospheric inflow below the ATB crust, high-temperature metamorphism and felsic magmatism. Slab break-off in western Turkey probably occurred

No surface breaking on the Ecemiş Fault, central Turkey, since Late Pleistocene (~ 64.5 ka); new geomorphic and geochronologic data from cosmogenic dating of offset alluvial fans

Science.gov (United States)

Sarıkaya, M. A.; Yıldırım, C.; Çiner, A.

2015-05-01

The Ecemiş Fault Zone (EF) has been recognized as a major left lateral strike-slip fault in the Central Anatolian Fault Zone (CAFZ) of Turkey. However, its Quaternary slip-rate has been challenging to determine due to the difficulty of dating offset markers. Using high-precision offset measurements and 36Cl cosmogenic nuclide dating, we present the first geochronologically determined Late Quaternary slip-rate for the EF. Our study focuses on the excellent exposures of offset alluvial fan surfaces, originating from the Aladağlar, a Late Quaternary glaciated mountain. Analysis of airborne orthophotogrametry and GNSS (Global Navigation Satellite System) surveys indicates 168 ± 2 m left lateral and 31 ± 1 m vertical displacements. In-situ terrestrial cosmogenic 36Cl geochronology obtained from eleven surface boulders provides a minimum abandonment/incision age of 104.2 ± 16.5 ka for the oldest offset alluvial fan surface. Our geomorphic observations together with Self-potential geophysical surveys revealed the presence of an unfaulted alluvial fan terrace, which allows us to constrain the timing of deformation. The abandonment/incision age of this fan is 64.5 ± 5.6 ka based on thirteen 36Cl depth profile samples. Accordingly, we obtained a geologic fault slip-rate of 4.2 ± 1.9 mm a- 1 horizontally and 0.8 ± 0.3 mm a- 1 vertically for the time frame between 104.2 ± 16.5 ka and 64.5 ± 5.6 ka. Our analysis indicates that the EF has not been producing a major surface breaking earthquake on the main strand at least since 64.5 ± 5.6 ka (mid-Late Pleistocene). This could be the result of abandonment of the main strand and accommodation of deformation by other faults within the EF. Nevertheless, a recently occurred (30 September 2011) low magnitude (ML: 4.3) left lateral strike-slip earthquake indicates recent seismic activity of the EF. Comparison of the recent GPS velocity field with the longer slip history along the CAFZ indicates a constant but low strain

ONE OF THE MAIN NEOTECTONIC STRUCTURES IN THE NW CENTRAL ANATOLIA: BEYPAZARI BLIND THRUST ZONE AND RELATED FAULT-PROPAGATION FOLDS

Directory of Open Access Journals (Sweden)

Gürol SEYİTOĞLU

2016-12-01

Full Text Available This paper suggests that the structure known as "Beypazarı flexure / monocline" in the Turkish geology literature should be named as "Beypazarı fault-propagation folds". Beypazarı, Kilci and Başören blind thrusts together with Erenler back thrust constitute the Beypazarı Blind Thrust Zone which is an active neotectonic structure as indicated by earthquake activity. NW-SE contraction created by the interaction between the North Anatolian Fault Zone, the Kırıkkale-Erbaa Fault Zone and the Eskişehir Fault Zone produced the Eldivan-Elmadağ Pinched Crustal Wedge, the Abdüsselam Pinched Crustal Wedge and the Beypazarı Blind Thrust Zone. These structures take up the internal deformation of the Anatolian Plate.

Structural Evolution of central part of the Tuzgolu (Salt Lake) Basin, Central Anatolia, Turkey

Science.gov (United States)

Ada, M.; Cemen, I.; Çaptuğ, A.; Demirci, M.; Engin, C.

2017-12-01

The Tuzgolu Basin in Central Anatolia, Turkey, covers low-relief areas located between the Pontide Mountains to the North and Tauride Mountains to the South. The basin started to form as a rift basin during the Late Maastrichtian. The main Tuzgolu-Aksaray fault zone on the eastern margin of the basin and the northwest trending Yeniceoba and Cihanbeyli fault zones on the western margin of the basin were probably developed during that time. The basin has also experienced westward extension in response to westward escape of the Anatolian plate since Late Miocene. Several geologic studies have been conducted in the Tuz Gölü (Salt Lake) Basin and surrounding areas to determine structural and tectono-stratigraphic development of the basin. However, there are still many questions regarding the structural evolution of the basin. The main purpose of this study is to investigate the structural evolution of the central Tuzgolu Basin based on the structural interpretation of available 2-D seismic reflection profiles, well log analysis and construction of structural cross sections. The cross-sections will be based on depth converted seismic lines to determine structural geometry of the faults and folds. A preliminary Petrel project has been prepared using available seismic profiles. Our preliminary structural interpretations suggest that a well-developed rollover anticline was developed with respect to the westward extension in Central Anatolia. The rollover anticline is faulted in its crest area by both down-to-the west and down-to-the east normal faults. The geometry of the main boundary fault at depth still remains in question. We anticipate that this question will be resolved based on depth converted structural cross-sections and their restoration.

Postseismic deformation following the Mw 7.2, 23 October 2011 Van earthquake (Turkey): Evidence for aseismic fault reactivation

KAUST Repository

Dogan, Ugur

2014-04-16

Geodetic measurements following the 23 October 2011, Mw = 7.2 Van (eastern Turkey) earthquake reveal that a fault splay on the footwall block of the coseismic thrust fault was reactivated and slipped aseismically for more than 1.5 years following the earthquake. Although long-lasting aseismic slip on coseismic ruptures has been documented following many large earthquakes, long-lasting, triggered slip on neighboring faults that did not rupture during the earthquake has not been reported previously. Elastic dislocation and Coulomb stress modeling indicate that the postseismic deformation can be adequately explained by shallow slip on both the coseismic and splay fault and is likely driven mostly by coseismic stress changes. Thus, the slip deficit on the shallow section of the coseismic fault indicated by interferometric synthetic aperture radar-based models has been partially filled by aseismic slip, suggesting a lower likelihood for a large earthquake on the shallow section of the Van fault than suggested by previous studies.

Postseismic deformation following the Mw 7.2, 23 October 2011 Van earthquake (Turkey): Evidence for aseismic fault reactivation

KAUST Repository

Dogan, Ugur; Demir, Deniz Ö .; Ç akir, Ziyadin; Ergintav, Semih; Ozener, Haluk; Akoğlu, Ahmet M.; Nalbant, Sü leyman S.; Reilinger, Robert

2014-01-01

Geodetic measurements following the 23 October 2011, Mw = 7.2 Van (eastern Turkey) earthquake reveal that a fault splay on the footwall block of the coseismic thrust fault was reactivated and slipped aseismically for more than 1.5 years following the earthquake. Although long-lasting aseismic slip on coseismic ruptures has been documented following many large earthquakes, long-lasting, triggered slip on neighboring faults that did not rupture during the earthquake has not been reported previously. Elastic dislocation and Coulomb stress modeling indicate that the postseismic deformation can be adequately explained by shallow slip on both the coseismic and splay fault and is likely driven mostly by coseismic stress changes. Thus, the slip deficit on the shallow section of the coseismic fault indicated by interferometric synthetic aperture radar-based models has been partially filled by aseismic slip, suggesting a lower likelihood for a large earthquake on the shallow section of the Van fault than suggested by previous studies.

Determination of Toll-Like Receptor 1 Gene Polymorphisms in Zavot, Turkish Grey, East Anatolian Red, Anatolian Black and South Anatolian Red Cattle Breeds

Directory of Open Access Journals (Sweden)

Mehmet Ulaş Çınar

2016-05-01

Full Text Available Toll-like receptors (TLRs play an important role in non-specific immunity against different infectious agents such as bacterium or parasite. The aim of this work was to investigate the allele and genotype frequencies of three single-nucleotide polymorphisms (SNPs in bovine TLR1 gene in native Turkish cattle breeds. DNA samples were extracted using the phenol chloroform protocol from 77 Zavot, 60 Turkish Grey, 51 East Anatolian Red, 69 Anatolian Black and 46 South Anatolian Red cattle. Target regions of the TLR1 gene were digested BsII and HpyI88III restriction enzymes. Results showed that the (A allele frequency had higher in all native Turkish cattle breeds of the TLR1-G1409A locus. The (F allele frequency was found to be higher compared to (E allele in the TLR1-G1550A site. The frequencies of both (C and (T alleles were close to each other in the TLR1-C632T site. In conclusion genetic polymorphisms exist in Turkish native cattle populations in terms of known TLR1 variants.

Fluid activity within the North Anatolian Fault Zone according to 3D marine seismic data on the Sea of Marmara Western High

Science.gov (United States)

Grall, C.; Henry, P.; Thomas, Y.; Marsset, B.; Westbrook, G.; Saritas, H.; Géli, L.; Ruffine, L.; Dupré, S.; Scalabrin, C.; Augustin, J. M.; Cifçi, G.; Zitter, T.

2012-04-01

Along the northern branch of the North Anatolian Fault Zone (NAFZ) within the Sea of Marmara, numerous gas seeps occur. A large part of the gas origin is biogenic but on the Western High, gas bubbles and gas hydrate with a thermogenic signature have been sampled. The expulsion of deep fluids opened new perspective about the permeability, the mechanical properties and the monitoring of the NAFZ. Consequently, the Western High was selected for the deployment of a 3D seismic acquisition layout during the MARMESONET cruise (2009). Thirty-three km2 of high resolution seismic data (with a frequency content of 50-180 Hz) have been collected within the shear band of the fault. The SIMRAD EM-302 was also operated to detect acoustic anomalies related to the presence of gas bubbles in the water column. Within the upper sedimentary cover (seismic penetration ranges from 100 to 500 m bsf), high seismic amplitude variations of the reflectors allow to identify gas traps and gas pathways. Local high amplitude of negative polarity, such as flat spots and bright spots, are observed. Amplitude anomalies are located above and within anticlines and along normal faults. They often correlate with seafloor manifestations of fluid outflow and gas plumes in the water column. This suggests that gas migrates from depth towards the seafloor along normal faults and permeable strata, and part of it is trapped in anticlines. North of the NAF, seabed mounds, corresponding to active hydrocarbon gas seeps, are aligned along a NE-SW direction. They are linked in depth to buried mud volcanoes with an episodic activity. The last mud eruption activity apparently just before or during the Red-H1 horizon deposition which is a prominent reflector of high amplitude and negative polarity occurring all over the Sea of Marmara. It has been interpreted as a stratigraphic horizon, corresponding to slow sedimentation and high sea-level interglacial period.

Miocene tectonic history of the Central Tauride intramontane basins, and the paleogeographic evolution of the Central Anatolian Plateau

Science.gov (United States)

Koç, Ayten; Kaymakci, Nuretdin; Van Hinsbergen, Douwe J. J.; Kuiper, Klaudia F.

2017-11-01

Marine Lower-Upper Miocene deposits uplifted to > 2 km elevation in the Tauride mountains of southern Turkey are taken as evidence for the rise of a nascent plateau. The dynamic causes of this uplift are debated, but generally thought to be a regional dynamic topographic effect of slab motions or slab break-off. Immediately adjacent to the high Tauride mountains lie the Central Tauride Intramontane Basins, which consist of Miocene and younger fluvio-lacustrine basins, at much lower elevations than the highly uplifted marine Miocene rocks. These basins include the previously analyzed Altınapa and Yalvaç basins, as well as the until now undescribed Ilgın Basin. In this paper, we aim to constrain the paleogeography of the Central Tauride Intramontane Basins and determine the role of the tectonics driving the formation of the high Miocene topography in southern Turkey. Therefore, we provide new data on the stratigraphy, sedimentology and structure of the continental Ilgın Basin. We provide an 40Ar/39Ar age of 11.61 ± 0.05 Ma for pumice deposits in the stratigraphy. We provide paleostress inversion analysis based on growth faults showing that the basin formed during multi-directional extension, with NE-SW to E-W dominating over subordinate Nsbnd S extension. We conclude that major, still-active normal faults like the Akşehir Fault also controlled Miocene Ilgın basin formation, with proximal facies close to the basin margins grading upwards and basinwards into lacustrine deposits representing the local depocenter. The Ilgın Basin was a local depocenter, but it may have connected with the adjacent Altınapa Basin during high lake levels in late Serravallian time. The Ilgın Basin and the other continental basins provide key constraints on the paleogeography and tectonic history of the region. These continental basins were likely close to the paleo-coastline during the Late Miocene after which there must have been major differential uplift of the Taurides. We

Mechanisms of unsteady shallow creep on major crustal faults

Science.gov (United States)

Jiang, J.; Fialko, Y. A.

2017-12-01

A number of active crustal faults are associated with geodetically detectable shallow creep, while other faults appear to be locked all the way to the surface over the interseismic period. Faults that exhibit shallow creep also often host episodic accelerated creep events. Examples include the Ismetpasa segment of the North Anatolian Fault (NAF) in Turkey and the Southern San Andreas and Superstition Hills (SHF) faults in Southern California. Recent geodetic observations indicate that shallow creep events can involve large fault sections (tens of km long) and persist throughout different stages of a seismic cycle. A traditional interpretation of shallow creep in terms of a velocity-strengthening (VS) layer atop the seismogenic velocity-weakening (VW) zone fails to explain episodic creep events. Wei et al. (2013) proposed that such events can be due to a thin VW layer within the VS shallow crust, implying rather special structural and lithologic conditions. We explore the rheologic controls on aseismic episodic slip and its implications for seismic faulting in the framework of laboratory rate-and-state friction. Observations of co-, post- and inter-seismic slip from the NAF and SHF are used to infer depth-dependent frictional properties in a 2D fault model. In particular, creep events with displacements on the order of millimeters and periods of months are reproduced in a model having monotonic depth variations in rate-and-state parameters. Such a model includes a velocity-neutral (VN) layer sandwiched between the surface layer with VS frictional properties, constrained by observed postseismic afterslip, and a deeper VW layer that largely controls the recurrence of major earthquakes. With the presence of the VN layer, the amount of surface-breaching coseismic slip critically depends on how dynamic weakening varies with depth in the seismogenic layer. Observations of limited surface slip during prior events on the NAF and SHF suggest that coseismic fault weakening is

A multidisciplinary approach for the study of the effects of active tectonics along the North Anatolian fault zone: possibilities for the application of the electrical self potential method

Directory of Open Access Journals (Sweden)

W. Balderer

1994-06-01

Full Text Available The aims of this joint interdisciplinary project “Marmara” of ETH Zurich and the Istanbul Technical University (ITO are to study the effects of active tectonics as evidenced by geology, geodesy and seismology on hydrogeology and geothermics in selected areas along the North Anatolian fault zone. Within the framework of this project thermal water systems in seven different areas have been investigated or are under investigation up to now (SchindIer et al., 1993. For three study areas along the North Anatolian fault zone (from east to west of Kuzuluk/Adapazari, Bursa and of Canakkale the investigations with respect to the geological and hydrogeological features are complete. The now possible hydrogeological characterisation shows encouraging possibilities for the application of new methods like the electrical self potential method for the following reasons: 1 a fully interdisciplinary approach, including seismic survey with especially conceived network, geodetic survey to investigate tectonic movements by the GPS method, geothermic survey combined with geological mapping and hydrogeological investigations of normal mineral and thermal waters; 2 groundwaters of very different chemical and isotopical composition e.g.: Ca-HCO3-type thermal waters of up to 82 °C temperature and total mineralisation of 500 mg/I to 1500 mg/I in the Bursa area, Na-HCO3-type cold mineral waters of up to 2500 mg/I to thermal waters of same mineralisation of up to 80 °C temperature, containing large amounts of CO2 of up to 1 l per 1 kg of water (at surface conditions in the Kuzuluk area and Na-Cl-type waters presenting real thermal brines of up to 65 000 mg/I of total mineralisation and temperatures of up to 100 °C in the Canakkale area; 3 distinct types of hydrodynamic flow regime in areas of different geological and tectonic structure. Based on the results of the investigations within these areas the possibilities of further studies including self potential methods

Extent and distribution of aseismic slip on the Ismetpaşa segment of the North Anatolian Fault (Turkey) from Persistent Scatterer InSAR

KAUST Repository

Cetin, Esra; Cakir, Ziyadin; Meghraoui, Mustapha; Ergintav, Semih; Akoglu, Ahmet M.

2014-01-01

2003 and 2010 reveals a clear picture of surface creep along the fault and a new interseismic velocity field transitioning gradually between the creeping and the locked fault sections. The creep rate is found to fluctuate along a 100 km long section

Probabilistic seismic hazard assessment for the two layer fault system of Antalya (SW Turkey) area

Science.gov (United States)

Dipova, Nihat; Cangir, Bülent

2017-09-01

Southwest Turkey, along Mediterranean coast, is prone to large earthquakes resulting from subduction of the African plate under the Eurasian plate and shallow crustal faults. Maximum observed magnitude of subduction earthquakes is Mw = 6.5 whereas that of crustal earthquakes is Mw = 6.6. Crustal earthquakes are sourced from faults which are related with Isparta Angle and Cyprus Arc tectonic structures. The primary goal of this study is to assess seismic hazard for Antalya area (SW Turkey) using a probabilistic approach. A new earthquake catalog for Antalya area, with unified moment magnitude scale, was prepared in the scope of the study. Seismicity of the area has been evaluated by the Gutenberg-Richter recurrence relationship. For hazard computation, CRISIS2007 software was used following the standard Cornell-McGuire methodology. Attenuation model developed by Youngs et al. Seismol Res Lett 68(1):58-73, (1997) was used for deep subduction earthquakes and Chiou and Youngs Earthq Spectra 24(1):173-215, (2008) model was used for shallow crustal earthquakes. A seismic hazard map was developed for peak ground acceleration and for rock ground with a hazard level of a 10% probability of exceedance in 50 years. Results of the study show that peak ground acceleration values on bedrock change between 0.215 and 0.23 g in the center of Antalya.

Turhan Baytop (1920-2002): A pioneer historian of pharmacy from Turkey.

Science.gov (United States)

Tekiner, Halil

2017-11-01

Turhan Baytop, a Turkish professor of pharmacognosy (the scientific study of crude drugs of animal, vegetable, and mineral origin), received international acclaim not only for his contributions in collecting and identifying the Anatolian plants, but also for his extensive research shedding light on the history of Turkish pharmacy. As a devoted researcher, collector, and lecturer, T Baytop was a genuine pioneer of the history of pharmacy as a discipline in Turkey.

Insurance Applications of Active Fault Maps Showing Epistemic Uncertainty

Science.gov (United States)

Woo, G.

2005-12-01

high deductible is in force, this requires estimation of the epistemic uncertainty on fault geometry and activity. Transport infrastructure insurance is of practical interest in seismic countries. On the North Anatolian Fault in Turkey, there is uncertainty over an unbroken segment between the eastern end of the Dazce Fault and Bolu. This may have ruptured during the 1944 earthquake. Existing hazard maps may simply use a question mark to flag uncertainty. However, a far more informative type of hazard map might express spatial variations in the confidence level associated with a fault map. Through such visual guidance, an insurance risk analyst would be better placed to price earthquake cover, allowing for epistemic uncertainty.

Some forest trees for honeydew honey production in Turkey

Directory of Open Access Journals (Sweden)

S. Ünal

2017-08-01

Full Text Available Honey is an important source of nutrients and energy and an effective remedy against various human diseases. Honeydew honey is produced from honeydew of phloem-feeders that honeybees gather. In this study, we focused on honeydew producers and diversity of host tree species which are involved in honeydew production in Turkey. A total of 24 honeydew producers by host tree species are identified in Turkey. Of these, 13 coniferous trees and 11 deciduous trees. The main honeydew producer in Turkey is a scale insect, Marchalina hellenica Gennadius (Hemiptera: Margarodidae living mainly on pines (Turkish red pine, Aleppo pine, and rarely on stone pine, Anatolian black pine and Scots pine. Honeydew producer insects can be treated as serious pests of conifer and broadleaf trees. The aphids and the scale insects such as Ceroplastes floridensis, Cinara cedri, C. laportei, Eulachnus rileyi, Icerya purchase, Kermes vermilio, Lichtensia viburni and Saissetia oleae are known as pests in several European, Asian and African countries. Despite their potential harm to their host plants, insect species producing honeydew play an important role in honey production in Turkey. Turkish honey production is exported to EU countries and, furthermore beekeeping is an important part of agricultural sector in Turkey.

Reassessment of 50 years of seismicity in Simav-Gediz grabens (Western Turkey), based on earthquake relocations

Science.gov (United States)

Karasozen, E.; Nissen, E.; Bergman, E. A.; Walters, R. J.

2013-12-01

Western Turkey is a rapidly deforming region with a long history of high-magnitude normal faulting earthquakes. However, the locations and slip rates of the responsible faults are poorly constrained. Here, we reassess a series of large instrumental earthquakes in the Simav-Gediz region, an area exhibiting a strong E-W gradient in N-S extension rates, from low rates bordering the Anatolian Plateau to much higher rates in the west. We start with investigating a recent Mw 5.9 earthquake at Simav (19 May 2011) using InSAR, teleseismic body-wave modeling and field observations. Next, we exploit the small but clear InSAR signal to relocate a series of older, larger earthquakes, using a calibrated earthquake relocation method which is based on the hypocentroidial decomposition (HDC) method for multiple event relocation. These improved locations in turn provide an opportunity to reassess the regional style of deformation. One interesting aspect of these earthquakes is that the largest (the Mw 7.2 Gediz earthquake, March 1970) occurred in an area of slow extension and indistinct surface faulting, whilst the well-defined and more rapidly extending Simav graben has ruptured in several smaller, Mw 6 events. However, our relocations highlight the existence of a significant gap in instrumental earthquakes along the central Simav graben, which, if it ruptured in a single event, could equal ~Mw 7. We were unable to identify fault scarps along this section due to dense vegetation and human modification, and we suggest that acquiring LiDAR data in this area should be a high priority in order to properly investigate earthquake hazard in the Simav graben.

Youth Work in Turkey: A Sector Newly Emerging and Marked by Political Competition

Directory of Open Access Journals (Sweden)

Demet Lüküslü

2018-02-01

Full Text Available Youth work is a very recent field in Turkey and the evolution of the field has been very much influenced by the European institutions, especially with the European Union candidacy process of Turkey. Youth work in Turkey can be analyzed in three different layers since the central government, local government (municipalities and civil society organization all have youth work activities. During our Horizon 2020 PARTISPACE research project, we conducted ethnographic research to shed light on the local characteristics of youth work in a central Anatolian city in Turkey. The cases we discuss in the scope of this paper based on our ethnographic research includes two youth centers, one run by a central government agency, the Ministry of Youth and Sports, the other by a local municipality run by the party of opposition. The study reveals the influence of local dynamics and political competition in the development of youth policy and youth work. Our research demonstrates that, even if youth work is not a priority in the public policy agenda, it has become an object of political competition in Turkey.

Modeling of a historical earthquake in Erzincan, Turkey (Ms 7.8, in 1939) using regional seismological information obtained from a recent event

Science.gov (United States)

Karimzadeh, Shaghayegh; Askan, Aysegul

2018-04-01

Located within a basin structure, at the conjunction of North East Anatolian, North Anatolian and Ovacik Faults, Erzincan city center (Turkey) is one of the most hazardous regions in the world. Combination of the seismotectonic and geological settings of the region has resulted in series of significant seismic activities including the 1939 (Ms 7.8) as well as the 1992 (Mw = 6.6) earthquakes. The devastative 1939 earthquake occurred in the pre-instrumental era in the region with no available local seismograms. Thus, a limited number of studies exist on that earthquake. However, the 1992 event, despite the sparse local network at that time, has been studied extensively. This study aims to simulate the 1939 Erzincan earthquake using available regional seismic and geological parameters. Despite several uncertainties involved, such an effort to quantitatively model the 1939 earthquake is promising, given the historical reports of extensive damage and fatalities in the area. The results of this study are expressed in terms of anticipated acceleration time histories at certain locations, spatial distribution of selected ground motion parameters and felt intensity maps in the region. Simulated motions are first compared against empirical ground motion prediction equations derived with both local and global datasets. Next, anticipated intensity maps of the 1939 earthquake are obtained using local correlations between peak ground motion parameters and felt intensity values. Comparisons of the estimated intensity distributions with the corresponding observed intensities indicate a reasonable modeling of the 1939 earthquake.

Continental Transform Boundaries: Tectonic Evolution and Geohazards

Directory of Open Access Journals (Sweden)

Michael Steckler

2012-04-01

Full Text Available Continental transform boundaries cross heavily populated regions, and they are associated with destructive earthquakes,for example, the North Anatolian Fault (NAFacross Turkey, the Enriquillo-Plantain Garden fault in Haiti,the San Andreas Fault in California, and the El Pilar fault in Venezuela. Transform basins are important because they are typically associated with 3-D fault geometries controlling segmentation—thus, the size and timing of damaging earthquakes—and because sediments record both deformation and earthquakes. Even though transform basins have been extensively studied, their evolution remains controversial because we don’t understand the specifics about coupling of vertical and horizontal motions and about the basins’long-term kinematics. Seismic and tsunami hazard assessments require knowing architecture and kinematics of faultsas well as how the faults are segmented.

Post-collisional deformation of the Anatolides and motion of the Arabian indenter: A paleomagnetic analysis

International Nuclear Information System (INIS)

Piper, J; Tatar, O; Gursoy, H; Mesci, B L; Kocbulut, F; Huang, B

2008-01-01

In the Anatolides of Turkey the neotectonic (post collisional) phase of deformation embraces the period since final closure of the southern arm of Neotethys in mid-Miocene times. The Arabian Shield indenter has continued to deform into the weak Anatolian accretionary collage resulting from subduction of this ocean by a combination of differential movement relative to the African Plate and counterclockwise (CCW) rotation. Much of resulting deformation has been accommodated by slip along major transforms comprising the North Anatolian Fault Zone (NAFZ), the East Anatolian Fault Zone (EAFZ) and the northward extension of the Dead Sea Fault Zone (DSFZ) but has also been distributed as differential block rotations through the zone of weak crust in between. Facets of this deformation comprise crustal thickening and uplift to produce the Anatolian Plateau, establishment of transform faults and tectonic escape as Arabia has continued to impinge into the Anatolian collage. Paleomagnetic analysis of this deformation is facilitated by the widespread distribution of neotectonic volcanism and graben infills, and rotations relative to the Eurasian reference frame are recognised on two scales. Rapid rotation (up to 5 0 /10,000 years) of small fault blocks is identified between master faults along the intracontinental transforms but deformation does not extend away from these zones and shows that seismogenic upper crust is decoupled from a lower continental lithosphere undergoing continuum deformation. The broad area of weak accreted crust between the transforms is dissected into large fault blocks which exhibit much lower rotation rates (mostly 0 /100,000 years) that vary systematically across the Anatolides. Large CCW rotations near the Arabian indenter diminish westwards to become zero then CW near the limit of tectonic escape in western Turkey. The view that the collage has rotated anticlockwise as a single plate, either uniformly or episodically, during the Neotectonic era is

Prevalence and associated risk factors of intestinal parasites among children of farm workers in the southeastern Anatolian region of Turkey

Directory of Open Access Journals (Sweden)

Nebiye Yentur Doni

2015-09-01

Full Text Available [b][/b]Objective. To determine the species, prevalence, and associated risk factors of intestinal parasites in farm workers’ children in a representative sample in the southeastern Anatolian region of Turkey. Materials and method. A total of 333 farm workers’ children, under the age of six years, were selected using the probability sampling method. Mean age of the children was 3.63±0.5; 55.5% were female. Data were collected using a structured questionnaire and laboratory analysis of faecal samples. Results. The overall prevalence was 44.6% and the infected children had single, double, and triple parasitic infections at 72.3%, 23.0%, and 4.7%, respectively. The most common parasite was [i]G. intestinalis[/i] (47.97%, followed by [i]E. vermicularis[/i] (37.84%, [i]T. saginata[/i] (27.03%, [i]H. nana[/i] (12.16%, and [i]A. lumbricoides[/i] (7.43%, respectively. Age, gender, illiteracy of the households, poverty, absence of toilets, bathrooms, and kitchens at the place of residence, lack of safe potable water, geophagia (soil eating habit, and being a child of a seasonal farmworker were the most significant factors associated with intestinal parasitic infection (P<0.05. [i]G. intestinalis[/i] and [i]E. vermicularis[/i] were found as the most common parasites that cause salivation, abdominal pain, and tiredness (P<0.05. Conclusion. The study revealed that health education programmes for farm workers and farmers should be improved to increase awareness about living and working conditions, in order to control intestinal parasites. However, early diagnosis and treatment services for intestinal parasites should be provided by primary health care staff in the national child screening programme in agricultural populations.

Scanning Electron Microscopic Study of the Lingual Papillae in the Anatolian Water Buffalo

OpenAIRE

Can, M; Atalgin, S. H

2015-01-01

The purpose of this study was to describe the surface structure of the lingual papillae in Anatolian Water Buffaloes using SEM. Six male Anatolian Water Buffaloes were used. Filiform, lentiform and conical papillae were determined three types as mechanical papillae. Fungiform and vallate papillae were observed two types as gustatory papillae on the tongue in Anatolian Water Buffalo. The filiform papillae were observed on the apex and body of the tongue, besides randomly identified lateral sur...

Constant strain accumulation rate between major earthquakes on the North Anatolian Fault.

Science.gov (United States)

Hussain, Ekbal; Wright, Tim J; Walters, Richard J; Bekaert, David P S; Lloyd, Ryan; Hooper, Andrew

2018-04-11

Earthquakes are caused by the release of tectonic strain accumulated between events. Recent advances in satellite geodesy mean we can now measure this interseismic strain accumulation with a high degree of accuracy. But it remains unclear how to interpret short-term geodetic observations, measured over decades, when estimating the seismic hazard of faults accumulating strain over centuries. Here, we show that strain accumulation rates calculated from geodetic measurements around a major transform fault are constant for its entire 250-year interseismic period, except in the ~10 years following an earthquake. The shear strain rate history requires a weak fault zone embedded within a strong lower crust with viscosity greater than ~10 20  Pa s. The results support the notion that short-term geodetic observations can directly contribute to long-term seismic hazard assessment and suggest that lower-crustal viscosities derived from postseismic studies are not representative of the lower crust at all spatial and temporal scales.

Earthquake and Tsunami Disaster Mitigation in the Marmara Region and Disaster Education in Turkey Part3

Science.gov (United States)

Kaneda, Yoshiyuki; Ozener, Haluk; Meral Ozel, Nurcan; Kalafat, Dogan; Ozgur Citak, Seckin; Takahashi, Narumi; Hori, Takane; Hori, Muneo; Sakamoto, Mayumi; Pinar, Ali; Oguz Ozel, Asim; Cevdet Yalciner, Ahmet; Tanircan, Gulum; Demirtas, Ahmet

2017-04-01

There have been many destructive earthquakes and tsunamis in the world.The recent events are, 2011 East Japan Earthquake/Tsunami in Japan, 2015 Nepal Earthquake and 2016 Kumamoto Earthquake in Japan, and so on. And very recently a destructive earthquake occurred in Central Italy. In Turkey, the 1999 Izmit Earthquake as the destructive earthquake occurred along the North Anatolian Fault (NAF). The NAF crosses the Sea of Marmara and the only "seismic gap" remains beneath the Sea of Marmara. Istanbul with high population similar to Tokyo in Japan, is located around the Sea of Marmara where fatal damages expected to be generated as compound damages including Tsunami and liquefaction, when the next destructive Marmara Earthquake occurs. The seismic risk of Istanbul seems to be under the similar risk condition as Tokyo in case of Nankai Trough earthquake and metropolitan earthquake. It was considered that Japanese and Turkish researchers can share their own experiences during past damaging earthquakes and can prepare for the future large earthquakes in cooperation with each other. Therefore, in 2013 the two countries, Japan and Turkey made an agreement to start a multidisciplinary research project, MarDiM SATREPS. The Project runs researches to aim to raise the preparedness for possible large-scale earthquake and Tsunami disasters in Marmara Region and it has four research groups with the following goals. 1) The first one is Marmara Earthquake Source region observational research group. This group has 4 sub-groups such as Seismicity, Geodesy, Electromagnetics and Trench analyses. Preliminary results such as seismicity and crustal deformation on the sea floor in Sea of Marmara have already achieved. 2) The second group focuses on scenario researches of earthquake occurrence along the North Anatolia Fault and precise tsunami simulation in the Marmara region. Research results from this group are to be the model of earthquake occurrence scenario in Sea of Marmara and the

The prevalence of prescribing antibiotics by primary health care physicians in Turkey: A multi-centered survey

International Nuclear Information System (INIS)

Acimis, N.M.; Yazici, A.C.; Gocmen, L.; Mas, R.

2009-01-01

Objective: Antibiotics are widely used in the treatment of infections and for empirical treatment purposes. Despite this common consumption of antibiotics, it is difficult to state that antibiotics are chosen and used consciously. This study was planned to determine the prevalence of prescribing antibiotics in Turkey. Methodology: This cross-sectional study was conducted in November 2003. The study was carried out in a total of 46 primary care health centers of the following cities; Central Anatolian, Western Anatolian, Eastern Anatolian regions. Results: Two hundred sixty seven physicians participated in the study, 38.9% (104) of which were women and 61.1% (163) were men. The proportion of antibiotic prescription was by 22,6%, and the most frequently chosen antibiotics were 15.6% (3301) Amoxycilline + Clavulanic acid (Amox/Clav), 15.1% (3184) Ampicilline + Sulbactam 12.84% (2711), respectively. When prescriptions with antibiotics were evaluated according to diagnosis, the most frequent diagnoses were found to be as follows: 53.3% (11430) Acute Upper Respiratory Infections, 16.4% (3516) Urinary Tract Infections. Conclusions: The findings of the study suggest that primary health care physicians most often prescribe for acute respiratory tract infections, and prescribe Amoxycilline + Clavunic the most. It may be argued that more extensive studies are needed in this field. (author)

Estimation of the long-term slip, surface uplift and block rotation along the northern strand of the North Anatolian Fault Zone: Inferences from geomorphology of the Almacık Block

Science.gov (United States)

Yıldırım, Cengiz; Tüysüz, Okan

2017-11-01

The Almacık Block is one of the key morphotectonic units in the eastern Marmara Region associated with the long-term slip partitioning within the North Anatolian Fault Zone (NAFZ). In this study, we provide new geomorphic reconstructions of offset drainage basins, morphometric analysis of topography, and longitudinal profiles of the rivers crossing different flanks of the Almacık Block. Our geomorphic reconstructions of offset drainage basins along the Hendek and Karadere faults imply mean offsets of 2.3 ± 0.4 km and 8.4 ± 0.7 km, respectively, during the Quaternary. Our dataset also imply that slip partitioning occurs in a broader zone than previously proposed, and that the total 10.7 ± 0.6 km offset along the Hendek and Karadere faults of the northern strand must be taken into account for long-term slip partitioning in the Eastern Marmara Region. Together with previously suggested 10 km offset along the southern strand (Yaltırak, 2002), 16 ± 1.0 km offset along the middle strand (Özalp et al., 2013) and the 52 ± 1.0 km offset along the Mudurnu Segment of the northern strand (Akbayram et al., 2016) our newly proposed geomorphic markers raise the cumulative offset in the eastern Marmara region associated with the NAF to 89 ± 1.0 km since the Latest Pliocene - Quaternary. In addition to these lateral displacements, our morphometric analysis and longitudinal profiles of the rivers imply up to 1130 ± 130 m surface uplift of the Almacık Block as a combined result of vertical displacement within the deformation zone of the northern strand of the NAFZ. Finally, by assuming that river basins act as passive deformation markers, our basin azimuth analyses imply 20° ± 2° clockwise rotation of the Almacık Block associated with the NAFZ.

Fault strength in Marmara region inferred from the geometry of the principle stress axes and fault orientations: A case study for the Prince's Islands fault segment

Science.gov (United States)

Pinar, Ali; Coskun, Zeynep; Mert, Aydin; Kalafat, Dogan

2015-04-01

The general consensus based on historical earthquake data point out that the last major moment release on the Prince's islands fault was in 1766 which in turn signals an increased seismic risk for Istanbul Metropolitan area considering the fact that most of the 20 mm/yr GPS derived slip rate for the region is accommodated mostly by that fault segment. The orientation of the Prince's islands fault segment overlaps with the NW-SE direction of the maximum principle stress axis derived from the focal mechanism solutions of the large and moderate sized earthquakes occurred in the Marmara region. As such, the NW-SE trending fault segment translates the motion between the two E-W trending branches of the North Anatolian fault zone; one extending from the Gulf of Izmit towards Çınarcık basin and the other extending between offshore Bakırköy and Silivri. The basic relation between the orientation of the maximum and minimum principal stress axes, the shear and normal stresses, and the orientation of a fault provides clue on the strength of a fault, i.e., its frictional coefficient. Here, the angle between the fault normal and maximum compressive stress axis is a key parameter where fault normal and fault parallel maximum compressive stress might be a necessary and sufficient condition for a creeping event. That relation also implies that when the trend of the sigma-1 axis is close to the strike of the fault the shear stress acting on the fault plane approaches zero. On the other hand, the ratio between the shear and normal stresses acting on a fault plane is proportional to the coefficient of frictional coefficient of the fault. Accordingly, the geometry between the Prince's islands fault segment and a maximum principal stress axis matches a weak fault model. In the frame of the presentation we analyze seismological data acquired in Marmara region and interpret the results in conjuction with the above mentioned weak fault model.

[Recent demographic trends in Turkey].

Science.gov (United States)

Behar, C

1993-01-01

Coverage of Turkey's vital registration system remains incomplete, and it cannot yet be used to measure annual population changes. Data and demographic indices based on the 1990 census and the 1989 National Demographic Survey are the most recent available. Turkey's population in 1990 was 56 million. The proportion urban increased to 59% from 49.2% in 1980. Nearly 35% of the population was under 15 years old, and the median age was 21.6 for males and 22.3 for females. The average age at first marriage in 1989 was 24.8 for men and 21.8 for women. Mortality has been in continuous decline. The crude death rate dropped from 16.4/1000 in 1960-65 to slightly under 8 in 1989. Life expectancy at birth was 63.3 for men and 66 for women. The infant mortality rate declined from 166 in 1965-70 to 85 in 1989. Rural or urban residence and maternal educational level were the most significant determinants of infant mortality differentials. Turkey's total fertility rate declined from 6.2 in 1960 to 4.3 in 1978 and 3.4 in 1988-89. The crude birth rate declined from around 40/1000 in 1968 to under 28/1000 in 1989. Fertility began to decline in the last third of the nineteenth century in Istanbul and other large cities of the Ottoman Empire. Istanbul's total fertility rate was a relatively low 3.9 even before World War I. Turkey adopted a policy to slow demographic growth in the mid 1960s, and family planning activities were supported by nongovernmental organizations. The direct impact of these policies on demographic behavior appears to have been somewhat limited, and the use of traditional methods of birth limitation remains widespread. Abortion was legalized in 1983 and is available at public hospitals. The proportion of married women aged 15-49 who use contraception increased from 38% in 1973 to 63% in 1988. Regional differentials in demographic indices are significant in Turkey, with the Anatolian East and Southeast lagging behind other regions in fertility and mortality decline

Assessment of natural radioactivity and heavy metals in water and soil around seismically active area

International Nuclear Information System (INIS)

Oktay Baykara; Mahmut Dogru; Firat University, Elazig

2010-01-01

The natural radioactivity concentration and some heavy metals in various water and soil samples collected from seismically active area have been determined. Gross-alpha and beta concentrations of different 33 water samples and some heavy metal (Fe, Pb, Cu, K, Mn, Cr and Zn) concentration in 72 soil samples collected from two major fault systems (North and East Anatolian Active Fault Systems) in Turkey have been studied. This survey regarding gross-alpha and beta radioactivity and some heavy metals concentrations was carried out by means of Krieger method using a gross-alpha and beta-counting system and atomic absorption spectrometry (AAS), respectively. Also, gross annual effective dose from the average gross-alpha activity in waters were calculated. (author)

COMPARATIVE EVALUATION OF THE INFLUENCING EFFECTS OF GEOMAGNETIC SOLAR STORMS ON EARTHQUAKES IN ANATOLIAN PENINSULA

Directory of Open Access Journals (Sweden)

Yesugey Sadik Cengiz

2009-07-01

Full Text Available Earthquakes are tectonic events that take place within the fractures of the earth's crust, namely faults. Above certain scale, earthquakes can result in widespread fatalities and substantial financial loss. In addition to the movement of tectonic plates relative to each other, it is widely discussed that there are other external influences originate outside earth that can trigger earthquakes. These influences are called "triggering effects". The purpose of this article is to present a statistical view to elaborate if the solar geomagnetic storms trigger earthquakes.As a model, the research focuses on the Anatolian peninsula, presenting 41 years of historical data on magnetic storms and earthquakes collated from national and international resources. As a result of the comparative assessment of the data, it is concluded that the geomagnetic storms do not trigger earthquakes.

Field Investigations and a Tsunami Modeling for the 1766 Marmara Sea Earthquake, Turkey

Science.gov (United States)

Aykurt Vardar, H.; Altinok, Y.; Alpar, B.; Unlu, S.; Yalciner, A. C.

2016-12-01

Turkey is located on one of the world's most hazardous earthquake zones. The northern branch of the North Anatolian fault beneath the Sea of Marmara, where the population is most concentrated, is the most active fault branch at least since late Pliocene. The Sea of Marmara region has been affected by many large tsunamigenic earthquakes; the most destructive ones are 549, 553, 557, 740, 989, 1332, 1343, 1509, 1766, 1894, 1912 and 1999 events. In order to understand and determine the tsunami potential and their possible effects along the coasts of this inland sea, detailed documentary, geophysical and numerical modelling studies are needed on the past earthquakes and their associated tsunamis whose effects are presently unknown.On the northern coast of the Sea of Marmara region, the Kucukcekmece Lagoon has a high potential to trap and preserve tsunami deposits. Within the scope of this study, lithological content, composition and sources of organic matters in the lagoon's bottom sediments were studied along a 4.63 m-long piston core recovered from the SE margin of the lagoon. The sedimentary composition and possible sources of the organic matters along the core were analysed and their results were correlated with the historical events on the basis of dating results. Finally, a tsunami scenario was tested for May 22nd 1766 Marmara Sea Earthquake by using a widely used tsunami simulation model called NAMIDANCE. The results show that the candidate tsunami deposits at the depths of 180-200 cm below the lagoons bottom were related with the 1766 (May) earthquake. This work was supported by the Scientific Research Projects Coordination Unit of Istanbul University (Project 6384) and by the EU project TRANSFER for coring.

Study of attenuation structure for central Anatolia region, Turkey based on Keskin seismic array data

Science.gov (United States)

Semin, K. U.; Ozel, N. M.

2011-12-01

Central Anatolia is bounded in the north by the well-known north Anatolian fault system (NAFS) and on the south-southwest is bounded by the east Anatolian fault system (EAFS). The central area does not have major faults and acts as a single block moving westward. This region is not considered as seismically active as the NAFS or EAFS but the recent moderate-size Bala earthquakes (Ml=5.7, Ml= 5.5) on 20 and 27 December 2007 near the Tuz golu fault may be an indication of future seismic activity. In order to get a better picture of the crustal structure of this region we applied Coda Normalization method for the measurement of Qs-1 as a function of frequency for the frequencies 1.5, 3, 6, 8 Hz. 20 and 27 December 2007 Bala earthquakes (Ml magnitude 5.6 an 5.5) and their aftershocks recorded by the Keskin seismic array (International Monitoring System code BRTR) is analyzed in this study. Keskin seismic array has a small aperture circular design with 6 vertical short period and 1 broadband borehole seismometers. In addition, Multiple Lapse Time Window Analysis (MLTWA) method was applied to the data for the separation of intrinsic and scattering attenuation inm the region at the same frequencies. MLTWA method allowed a separation between the intrinsic attenuation and scattering attenuation. Preliminary results show a relatively low attenuation compared to western and eastern anatolia regions. This might be explained by the less seismicity in the region. A study of the regional and site attenuation of seismic waves of earthquakes in this area will contribute in predicting earthquake generated ground-motion and becomes vital in making decisions for earthquake regulations, building codes and to monitoring nuclear explosions.

Urban ecological characteristics and vascular wall flora on the Anatolian side of Istanbul, Turkey

Directory of Open Access Journals (Sweden)

Volkan Altay

2010-11-01

Full Text Available The aim of this study is to specify the urban ecologic characteristics of Istanbul and to show their reflection to the vascular wall flora of the Anatolian side, which is a distinctive wall habitat. Plants samples of the urban habitat were collected from the top and vertical surfaces of walls during 2005-2007. A total of 101 taxa (81 species, 13 subspecies and 7 varieties belonging to 74 genera and 33 families were recorded. It was determined that 80 species were Dicotyledones while 1 was Monocotyledone. The families with the largest number of taxa were Asteraceae (18 species, 22.22%, Poaceae (8 species, 9.87%, Lamiaceae and Brassicaceae (5 species, 6.17%, and Polygonaceae and Scrophulariaceae (4 species, 4.93%. The most common plant species on walls were Parietaria judaica L. (Urticaceae, Stellaria media (L. Vill. subsp. media (Caryophyllaceae, and Mercurialis annua L. (Euphorbiaceae. The percentage of phytogeographical elements among the recorded taxa varied as follows: Euro-Siberian (6 taxa, 7.41%, Mediterranean (11 taxa, 13.58%, E. Mediterranian (2 taxa, 2.47%, Irano-Turanian (1 taxon, 1.23% and unknown (61 taxa, 75.31%. It was found that 6 taxa (7.41% were cosmopolitan, 12 (14.82% were widespread while 1 (1.23% was endemic. The results were compared with some other European wall floras and some similarities and dissimilarities were noted.

The Non-Regularity of Earthquake Recurrence in California: Lessons From Long Paleoseismic Records in Simple vs Complex Fault Regions (Invited)

Science.gov (United States)

Rockwell, T. K.

2010-12-01

A long paleoseismic record at Hog Lake on the central San Jacinto fault (SJF) in southern California documents evidence for 18 surface ruptures in the past 3.8-4 ka. This yields a long-term recurrence interval of about 210 years, consistent with its slip rate of ~16 mm/yr and field observations of 3-4 m of displacement per event. However, during the past 3800 years, the fault has switched from a quasi-periodic mode of earthquake production, during which the recurrence interval is similar to the long-term average, to clustered behavior with the inter-event periods as short as a few decades. There are also some periods as long as 450 years during which there were no surface ruptures, and these periods are commonly followed by one to several closely-timed ruptures. The coefficient of variation (CV) for the timing of these earthquakes is about 0.6 for the past 4000 years (17 intervals). Similar behavior has been observed on the San Andreas Fault (SAF) south of the Transverse Ranges where clusters of earthquakes have been followed by periods of lower seismic production, and the CV is as high as 0.7 for some portions of the fault. In contrast, the central North Anatolian Fault (NAF) in Turkey, which ruptured in 1944, appears to have produced ruptures with similar displacement at fairly regular intervals for the past 1600 years. With a CV of 0.16 for timing, and close to 0.1 for displacement, the 1944 rupture segment near Gerede appears to have been both periodic and characteristic. The SJF and SAF are part of a broad plate boundary system with multiple parallel strands with significant slip rates. Additional faults lay to the east (Eastern California shear zone) and west (faults of the LA basin and southern California Borderland), which makes the southern SAF system a complex and broad plate boundary zone. In comparison, the 1944 rupture section of the NAF is simple, straight and highly localized, which contrasts with the complex system of parallel faults in southern

Earthquake prediction research with plastic nuclear track detectors

International Nuclear Information System (INIS)

Woith, H.; Enge, W.; Beaujean, R.; Oschlies, K.

1988-01-01

Since 1984 a German-Turkish project on earthquake prediction research has been operating at the North Anatolian fault zone in Turkey. Among many other parameters changes in Radon emission have also been investigated. Plastic nuclear track detectors (Kodak cellulose nitrate LR 115) are used to record alpha-particles emitted from Radon and Thoron atoms and their daughter isotopes. The detectors are replaced and analyzed every 3 weeks. Thus a quasi-continuous time sequence of the Radon soil gas emission is recorded. We present a comparison between measurements made with electronic counters and plastic track detectors. (author)

Microzonation Studies In District of Dikili, Izmir (Turkey) In The Context of Social Responsibility by Using GIS Tecniques

Science.gov (United States)

Karabulut, Savas; Cinku, Mualla; Tezel, Okan; Hisarli, Mumtaz; Ozcep, Ferhat; Tun, Muammer; Avdan, Ugur; Ozel, Oguz; Acikca, Ahmet; Aygordu, Ozan; Benli, Aral; Kesisyan, Arda; Yilmaz, Hakan; Varici, Cagri; Ozturkan, Hasan; Ozcan, Cuneyt; Kivrak, Ali

2015-04-01

Social Responsibility Projects (SRP) are important tools in contributing to the development of communities and applied educational science. Researchers dealing with engineering studies generally focus on technical specifications. However, when the subject depends on earthquake, engineers should be consider also social and educational components, besides the technical aspects. If scientific projects collaborated with municipalities of cities, it should be known that it will reach a wide range of people. Turkey is one of the most active region that experienced destructive earthquakes. The 1999 Marmara earthquake was responsible for the loose of more than 18.000 people. The destructive damage occurred on buildings that made on problematic soils. This however, is still the one of most important issues in Turkey which needs to be solved. Inspite of large earthquakes that occurred along the major segments of the North and East Anatolian Fault Zones due to the northwards excursion of Anatolia, the extensional regime in the Aegean region is also characterized by earthquakes that occurred with the movement of a number of strike slip and normal faults. The Dikili village within the Eastern Aegean extensional region experienced a large earthquake in 1939 (M: 6.8). The seismic activity is still characterised by high level and being detected. A lot of areas like the Kabakum village have been moved to its present location during this earthquake. The probability of an earthquake hazard in Dikili is considerably high level, today. Therefore, it is very important to predict the soil behaviour and engineering problems by using Geographic Information System (GIS) tools in this area. For this purpose we conducted a project with the collaboration of the Dikili Municipality in İzmir (Turkey) to determine the following issues: a) Possible disaster mitigation as a result of earthquake-soil-structure interaction, b) Geo-enginnering problems (i.e: soil liquefaction, soil settlement, soil

Induced abortion and effecting factors of ever married women in the Southeast Anatolian Project Region, Turkey: a cross sectional study

Directory of Open Access Journals (Sweden)

Acemoglu Hamit

2004-12-01

Full Text Available Abstract Background Nearly 10% of the population of Turkey lives in the Southeast Anatolian Project (SEAP region. The population growth rate and the rate of unintended pregnancies are high and family planning services are insufficient in this region. Lifetime induced abortion rate is also high in this region. Public health problems of the SEAP region were investigated in the "SEAP Public Health Project" in 2001 and 2002. As it is one of the most important health problems of the women living in this region; induced abortion was also investigated in this project. Methods An optimumsample size representing the rural and urban area of the region (n = 1150 was chosen by the State Institute of Statistics by a sampling method proportional to size. 1126 of the area's 1150 houses have been visited and data about induced abortions have been obtained by applying a questionnaire to 1491 ever married women who live in the region. Results It has been found that 9.0% of these women who had at least one pregnancy in their life had at least one induced abortion. The lifetime induced abortion per 100 pregnancies was found to be 2.45. The primary reason given for induced abortions was "wanting no more children" (64.6%. Lifetime induced abortions were 5.3 times greater with women using a family planning method than women not using family planning methods. Lifetime induced abortions were 4.1 times greater with unemployed women than working women. Most of the women have used private doctors in order to have an induced abortion. Although 32.29% have not yet begun to use a contraceptive method after their last induced abortion, 43.75% of the women have since started to use an effective contraceptive method. 23.96% of them have begun to use an ineffective contraceptive method. Conclusions Induced abortion is still an important problem at the SEAP region. The results of the study remind us that unemployed women and women who have more than four children is our target

A 150-ka-long record for the volcano-tectonic deformation of Central Anatolian Volcanic Province

Science.gov (United States)

Karabacak, Volkan; Tonguç Uysal, I.; Ünal-İmer, Ezgi; Mutlu, Halim; Zhao, Jian-xin

2017-04-01

The Anatolian Block represents one of the most outstanding examples of intra-plate deformation related to continental collision. Deformation related to the convergence of the Afro-Arabian continent toward north gives rise to widespread and intense arc volcanism in the Central Anatolia. All the usual studies on dating the volcano-tectonic deformation of the region are performed entirely on volcanic events of the geological record resulted in eruptions. However, without volcanic eruption, magma migration and related fluid pressurization also generate crustal deformation. In the current study has been funded by the Scientific and Technological Research Council of Turkey with the project no. 115Y497, we focused on fracture systems and their carbonate veins around the Ihlara Valley (Cappadocia) surrounded by well-known volcanic centers with latest activities of the southern Central Anatolian Volcanic Province. We dated 37 samples using the Uranium-series technique and analyzed their isotope systematics from fissure veins, which are thought to be controlled by the young volcanism in the region. Our detailed fracture analyses in the field show that there is a regional dilatation as a result of a NW-SE striking extension which is consistent with the results of recent GPS studies. The Uranium-series results indicate that fracture development and associated carbonate vein deposition occurred in the last 150 ka. Carbon and oxygen isotope systematics have almost remained unchanged in the studied time interval. Although veins in the region were precipitated from fluids primarily of meteoric origin, fluids originating from water-rock interaction also contribute for the deposition of carbonate veins. The age distribution indicates that the crustal deformation intensified during 7 different period at about 4.7, 34, 44, 52, 83, 91, 149 ka BP. Four of these periods (4.7, 34, 91, 149 ka BP) correspond to the volcanic activities suggested in the previous studies. The three crustal

Preliminary Data about Vertical Deformation of the eastern part of the Anatolian Scholle: Insight from Pülümür River Terraces

Science.gov (United States)

Sançar, Taylan; Sunal, Gürsel; Korhan Erturaç, M.

2017-04-01

The northward motion of the African and Arabian plates relative to Eurasia and westward motion of the Anatolian scholle (An) have a key role in understanding of the eastern Mediterranean tectonics setting. The North and East Anatolian Shear Zones (NASZ and EASZ) present the main deformation zones of westward extrusion of the Anatolia whereas the NW-striking dextral and the NE-striking sinistral faults represent the remarkable intra-plate deformation within the An. In contrast to the earlier hypothesis, recent geologic and geodetic studies and micro seismic activity strongly suggests that internal deformation of the An is a continuous process. Some of these strike-slip faults, such as Tuzgölü Fault, Ecemiş Fault and Malatya-Ovacık Fault Zone (MOFZ), have long been documented in terms of the kinematic evolution, slip-rate and paleoseismic activity but there is no or very limited knowledge on the uplift characteristics of the An. In this study, we focused on more complex region of the An, which is delimited by the NASZ at north, the EASZ at southeast, the MOFZ at west and the Nazmiye Fault Zone (NFZ) at south. We present data on the distribution of geologic and morphologic structures by using satellite images, aerial stereo pairs, digital elevation models (DEM) with 10 m ground pixel resolution and extensive field observations in this region, particularly along the NFZ that has two sub-parallel segments. The horizontal deformation along the NFZ, within the eastern part of the An, represented by 20 m to 10 km horizontal displacements.The spatial distribution of terraces of the Pülümür River that is one of the biggest drainage systems of the region is a clear morphologic indicator of the vertical deformation of the eastern An. The Pülümür River incised into Paleozoic metamorphic basement at the north and Eocene volcanoclastic at the south. We mapped three terrace levels (T1-T3) in the V-shaped Pülümür River valley that has about 5 km offset along the both

Investigating Land Surface Temperature Changes Using Landsat Data in Konya, Turkey

Directory of Open Access Journals (Sweden)

O. Orhan

2016-06-01

Full Text Available The main purpose of this paper is to investigate multi-temporal land surface temperature (LST and Normalized Difference Vegetation Index (NDVI changes of Konya in Turkey using remotely sensed data. Konya is located in the semi-arid central Anatolian region of Turkey and hosts many important wetland sites including Salt Lake. Six images taken by Landsat-5 TM and Landsat 8- OLI satellites were used as the basic data source. These raw images were taken in 1984, 2011 and 2014 intended as long-term and short-term. Firstly, those raw images was corrected radiometric and geometrically within the scope of project. Three mosaic images were obtained by using the full-frame images of Landsat-5 TM / 8- OLI which had been already transformed comparison each other. Then, Land Surface Temperature (LST, Normalized Difference Vegetation Index (NDVI maps have been produced to determine the dimension of the drought. The obtained results showed that surface temperature rates in the basin increased about 5°C between 1984 and 2014 as long periods, increased about 2-3°C between 2011and 2014 as short periods. Meteorological data supports the increase in temperature.

The effect of personal, familial, and environmental characteristics on acne vulgaris: a prospective, multicenter, case controlled study from Turkey.

Science.gov (United States)

Karadağ, Ayşe S; Balta, İlknur; Saricaoğlu, Hayriye; Kiliç, Selim; Kelekçi, Kıymet H; Yildirim, Mehmet; Arica, Deniz A; Öztürk, Savaş; Karaman, Göksun; Çerman, Aslı A; Bilgili, Serap G; Turan, Enver; Demirci, Mustafa M; Uzunçakmak, Tuğba K; Güvenç, Serdar C; Ataseven, Arzu; Ferahbaş, Ayten; Aksoy, Berna; Çölgeçen, Emine; Ekiz, Özlem; Topaloğlu Demir, Filiz; Bilgiç, Özlem; Çakmak, Seray; Uçmak, Derya; Özuğuz, Pınar; Kaymak Konkuralp, Yeşim; Ermertcan, Aylin T; Gökdemir, Gonca; Bülbül Başkan, Emel; Alyamaç, Gökçen; Şanli, Hatice

2017-07-11

There are only a few studies about epidemiological features of acne vulgaris in the literature. The aim of this study was to analyze demographic, clinical, familial and environmental characteristics of acne, the role of diet and aggravating factors and association of these factors with acne severity. Patients with a diagnosis of mild-moderate to severe acne were consecutively interviewed at the participating centers during the study period. A total of 3826 patients and 759 control patients were involved in this study. Mild acne was the most common type of acne, and most of the lesions were localized on face followed by the trunk. The severity of acne was worse in patients who had a positive family history of acne. The most common triggering factor was psychological stress. We found a positive correlation with chocolate, bread, green tea, milk, white sugar, ripe banana, ice cream, apple, orange, and red meat consumption. As we compare the acne severity according to geographical features we detected mildmoderate acne was more common in Mediterrenean region and severe acne was more common in East Anatolian region. Family history positivity was more common in Aegean region and least common in Middle Anatolian region. There was statistically significant relationship as we compare acne severity and dietary factors such as chocolate, dairy products such as milk, sunflower seed consumption within the geographical regions. This study presents the demographic and clinical characteristics of acne patients in Asian and the European parts of Turkey. We believe that this study will provide a useful overview of acne in Turkey.

Technical NoteEarthquake dates and water level changes in wells in the Eskisehir region, Turkey

Directory of Open Access Journals (Sweden)

G. Yuce

2003-01-01

Full Text Available Although satisfactory results have yet to be obtained in earthquake prediction, one of the most common indicators of an anomalous precursor is a change in groundwater level in existing wells. Further wells should thus be drilled in unconfined aquifers since these are more susceptible to seismic waves. The Eskisehir region lies in the transition zone between the Aegean extensional domain and the compressible northern Anatolian block. Limnigraphs, installed in 19 exploration wells in the Eskisehir region, recorded pre-seismic, co-seismic and post-seismic level changes during the earthquakes of 17 August Izmit (Mw= 7.4 and 12 November Duzce (Mw= 7.2 1999 that occurred along the North Anatolian Fault Zone. The Izmit and Duzce earthquakes affected groundwater levels, especially in confined aquifers. The aquifer characteristics before and after the earthquakes were unchanged so the aquifer is elastic in its behaviour. Further detailed geo-mechanical investigation of the confined aquifer in the Eskisehir region may improve understanding of earthquake prediction. Keywords: earthquake prediction, Eskisehir, hydrological warning, monitoring groundwater levels

Monitoring tectonic uplift and paleo-environmental reconstruction for marine terraces near Magaracik and Samandag, Hatay Province, Turkey

International Nuclear Information System (INIS)

Florentin, Jonathan A.; Blackwell, Bonnie A.B.; Blickstein, Joel I.B.; Skinner, Anne R.; Tueysuez, Okan; Tari, Ufuk; Can Genc, S.; Imren, Caner; Mo, Shirley; Huang, Yiwen E.W.; Kim, Maria

2014-01-01

Near Hatay, the Antakya-Samandag-Cyprus Fault (ASCF), East Anatolian and Dead Sea Fault Zones, the large faults that form the edges of the African, Anatolian, Cyprus and Arabian Plates, all produce large earthquakes, which have decimated Hatay repeatedly. Near Samandag, Hatay, differential vertical displacement on the ASCF has uplifted the southeastern side relative to northwestern side, producing large fault scarps that parallel the Asi (Orontes) River. Tectonic uplift coupled with Quaternary sea level fluctuations has produced several stacked marine terraces stranded above current sea level. This study dated 24 mollusc samples from 10 outcrops on six marine terraces near Samandag electron spin resonance (ESR). Ages were calculated using time-averaged and volumetrically averaged external dose rates, modelled by assuming typical water depths for the individual species and sediment thicknesses estimated from geological criteria. Uplift rates were then calculated for each fault block. At all the Magaracik terraces, the dates suggest that many shells were likely reworked. On the 30 m terrace at Magaracik IV (UTM 766588-3999880), Lithophagus burrows with in situ shells cross the unconformity. One such shell dated to 62 ± 6 ka, setting the minimum possible age for the terrace. For all the Magaracik terraces at ∼30 m above mean sea level (amsl), the youngest ages for the reworked shells, which averaged 60 ± 3 ka for six separate analyses, sets the maximum possible age for this unit. Thus, the terrace must date to 60-62 ± 3 ka, at the MIS 3/4 boundary when temperatures and sea levels were fluctuating rapidly. Older units dating to MIS 7, 6, and 5 likely were being eroded to supply some fossils found in this terrace. At Magaracik Dump (UTM 765391-4001048), ∼103 m amsl, Ostrea and other shells were found cemented in growth position to the limestone boulders outcropping there -1 , since MIS 5c. At Samandag Kurt Stream at 38 m amsl, molluscs were deposited fine sandy

International Physics Conference at the Anatolian Peak (IPCAP2016)

International Nuclear Information System (INIS)

2016-01-01

The present volume of Journal of Physics: Conference Series represents contributions from participants of the International Physics Conference at the Anatolian Pe ak (IPCAP2016) Erzurum, Turkey, 25-27 February 2016, organized by Atatürk University Physics Department that were peer-reviewed by 40 expert referees to the best professional and scientific standards. The conference aims; to share the experiences and research results of academicians, researchers, and students (scientists) studying physics and related fields, to exchange information about the latest developments in physical science, to discuss the collaboration facilities and finally to provide scientific communication between scientists from different countries. The Conference venue was the Atatürk University Nenehatun Cultural Center in Erzurum. IPCAP 2016 conference covers a wide spectrum of important topics on physics with 12 different issues; 1. Atomic, Molecular and Plasma Physics; 2. Solid State and Nanophysics; 3. Nuclear Physics and Nuclear Energy; 4. Particle Physics; 5. Optic and Lasers; 6. Statistic Physics; 7. Mathematical Physics, 8. Applied Physics; 9. Biophysics and Medical Physics; 10. Physics Education; 11. Astronomy and Astrophysics and 12. Other topics. Even though we have organized the first IPCAP 2016 conference this year, about 300 papers will be presented in 4 separated halls and in 8 oral and 2 poster sessions during 3 days. I would like to thank the Invited Speakers for their significant contributions to the conference. I would also like to thank the members of the International Advisory and Scientific Committee, the members of the Organizing, conference secretary and sponsors. I hope the reader will enjoy this special issue and will find ideas for new bright achievements. (paper)

Traditional knowledge of wild edible plants of Iğdır Province (East Anatolia, Turkey

Directory of Open Access Journals (Sweden)

Ernaz Altundağ Çakır

2017-12-01

Full Text Available Iğdır Province is situated in the Eastern Anatolian Region of Turkey. Wild edible plants and their utilization methods have not been previously documented there. This study was conducted during an ethnobotanical survey of Iğdır Province from 2007 to 2012, in the period from May to October, when plants were in their flowering and fruiting periods. There were 210 interviews carried out in 78 villages. This study provides information about 154 wild plant taxa belonging to 27 families that have been used as foodstuffs, spices, or hot drinks. Seventeen wild edible plants were recorded for the first time during this study. Eight endemic species were reported as used for their edibility, and new local names for plants were also recorded. The cultural importance index was calculated for each taxon. The most culturally important species are Mentha longifolia, Falcaria vulgaris, Polygonum aviculare, Rosa canina, Crataegus azarolus, Capsella bursa-pastoris, and Malus sylvestris. This study presents the richest heritage in terms of the diversity of wild edible plants ever recorded in Turkey.

A new species of Leuctra from Turkey, and notes on Anatolian Rhabdiopteryx (Plecoptera: Leuctridae & Taeniopterygidae).

Science.gov (United States)

Murányi, Dávid; Vinçon, Gilles

2017-03-15

In the recent annotated catalogue of the Turkish Plecoptera, the fauna of Anatolia are considered remarkably rich with 32 micro-endemic species currently recorded (Darilmaz et al. 2016). The major hot spot is the Pontus, the eastern Black Sea region of Turkey. Nearly half of these micro-endemic stonefly species are only known from this region. The eastern subregion of the Pontus has a direct connection with the Caucasian stonefly fauna. This subregion even has an endemic species group of Leuctra Stephens, 1836, presently including four known species (Vinçon & Sivec 2001).

Simulation of {sup 137}Cs transport and deposition after the Chernobyl Nuclear Power Plant accident and radiological doses over the Anatolian Peninsula

Energy Technology Data Exchange (ETDEWEB)

Simsek, V.; Pozzoli, L.; Unal, A.; Kindap, T., E-mail: kindap@itu.edu.tr; Karaca, M.

2014-11-15

The Chernobyl Nuclear Power Plant (CNPP) accident occurred on April 26 of 1986, it is still an episode of interest, due to the large amount of radionuclides dispersed in the atmosphere. Caesium-137 ({sup 137}Cs) is one of the main radionuclides emitted during the Chernobyl accident, with a half-life of 30 years, which can be accumulated in humans and animals, and for this reason the impacts on population are still monitored today. One of the main parameters in order to estimate the exposure of population to {sup 137}Cs is the concentration in the air, during the days after the accident, and the deposition at surface. The transport and deposition of {sup 137}Cs over Europe occurred after the CNPP accident has been simulated using the WRF-HYSPLIT modeling system. Four different vertical and temporal emission rate profiles have been simulated, as well as two different dry deposition velocities. The model simulations could reproduce fairly well the observations of {sup 137}Cs concentrations and deposition, which were used to generate the ‘Atlas of Caesium deposition on Europe after the Chernobyl accident’ and published in 1998. An additional focus was given on {sup 137}Cs deposition and air concentrations over Turkey, which was one of the main affected countries, but not included in the results of the Atlas. We estimated a total deposition of 2–3.5 PBq over Turkey, with 2 main regions affected, East Turkey and Central Black Sea coast until Central Anatolia, with values between 10 kBq m{sup −2} and 100 kBq m{sup −2}. Mean radiological effective doses from simulated air concentrations and deposition has been estimated for Turkey reaching 0.15 mSv/year in the North Eastern part of Turkey, even if the contribution from ingestion of contaminated food and water is not considered, the estimated levels are largely below the 1 mSv limit indicated by the International Commission on Radiological Protection. - Highlights: • Chernobyl Nuclear Power Plant accident

Holocene sedimentary processes in the Gemlik Gulf: a transtensional basin on the middle Strand of the North Anatolian Fault, Sea of Marmara

Science.gov (United States)

Özmaral, A.; Çagatay, M. N.; Imren, C.; Gasperini, L.; Henry, P.

2012-04-01

Gemlik Gulf is an oval-shaped transtensional basin with a maximum depth of 113 m, located on the middle strand of the North Anatolian Fault (NAF) in the eastern part of the Sea of Marmara (SOM). During the last glacial period until the Holocene marine transgression about 12 ka BP, the sea level was below the Çanakkale (Dardanelles) Strait's bedrock sill depth of -85 m, and the Gemlik Basin became a lake isolated lake from the rest of the Sea of Marmara "Lake" and the global ocean. The high resolution seismic profiles and the multi- beam bathymetric map of the basin show that the basin is characterized by NW-SE trending transtensional oblique faults, delta lobes of the Büyükdere (Kocadere) to the east and an erosional surface below an up to 15 m-thick Holocene mud drape. The Holocene mud drape was studied in up to 9.5 m-long gravity-piston and 0.84 m-long sediment/water interface cores located at -105 to -113 m in the basin's depocentre. The Holocene mud consists mainly of plastic gray green marine clayey mud that includes thick-red brown clay layers and a laminated organic-rich, dark olive green sapropel in the lower part, which was previously dated at 11.6-6.4 14Ckyr (uncalib) BP. Multi-proxy analyses of the Holocene mud drape in the sediment cores were carried out using Multisensor Core Logger, XRF Core Scanner equipped with digital X-Ray radiography, and laser particle size analyzer. Seismic-core correlation was made using seismic data of the chirp profiles at the core locations and the synthetic seismograms generated using the MSCL P-wave velocity and gamma density measurements. The long piston-gravity cores include five 20 to 100 mm-thick "red brown mud layers" in the top 2.5 m of the core. These layers have a sharp basal boundary and gradational upper boundary. The red brown layers consist of 55-75% clay-size material with an average grain size of 3-4 µm, and have relatively a high magnetic susceptibility. They are enriched in K, Fe, Ti and Zr that are

Block-like plate movements in eastern Anatolia observed by InSAR

KAUST Repository

Cavalie, Olivier

2014-01-16

The question whether continental plates deform internally or move as rigid blocks has been debated for several decades. To further address this question, we use large-scale interferometric synthetic aperture radar (InSAR) data sets to study how eastern Anatolia and its surrounding plates deform. We find that most of the deformation is focused at the North and East Anatolian faults and little intraplate deformation takes place. Anatolia is therefore moving, at least its eastern part, as a uniform block. We estimate the slip velocity and locking depth of the North Anatolian fault at this location to be 20 mm/yr and ~14 km, respectively. High deformation gradient found near the East Anatolian fault, on the other hand, suggests that little stress is accumulating along the eastern sections of that fault.

Teacher Representations of English as a Foreign Language: Case Study of Two Teachers in Turkey

Directory of Open Access Journals (Sweden)

Sultan Turkan

2013-01-01

Full Text Available In a developing nation like Turkey, the English language plays a significant role in educational and socioeconomic mobility. English is acquired and taught as a foreign language (EFL primarily in the classrooms. However, the ways in which English language is represented in classroom instruction have been hardly examined and understood. With that, this paper aims to depict two teachers’ representations of the English language as influenced by a university entrance English language test administered in 2008 in Turkey. The two teachers’ representations of the English language are projected from a 12th grade classroom at an Anatolian Lycee located in the Mediterranean region of Turkey. Doyle's task framework is employed, specifically in order to map what content representations emerged out of the teachers' classroom practices. Data sources include biweekly teacher logs, biweekly interviews, and biweekly classroom observations. The paper highlights that the two teachers' classroom representations of English were entrenched with the idea of highstakes test preparation for university admissions as they deemed test preparation as a major part of their classroom instruction. That is, representations of the English language were contracted to tested structures and items. The paper illustrates the teachers’ representations of reading and grammar with the insight that division of labour, though not in the form of collaboration, made it possible for the teachers to cope with the contraction effect of test preparation

Nature of the basement of the East Anatolian plateau: Implications for the lithospheric foundering processes

Science.gov (United States)

Topuz, G.; Candan, O.; Zack, T.; Yılmaz, A.

2017-12-01

The East Anatolian Plateau (Turkey) is characterized by (1) an extensive volcanic-sedimentary cover of Neogene to Quaternary age, (2) crustal thicknesses of 42-50 km, and (3) an extremely thinned lithospheric mantle. Its basement beneath the young cover is thought to consist of oceanic accretionary complexes of Late Cretaceous to Oligocene age. The attenuated state of the lithospheric mantle and the causes of the young volcanism are accounted for by slab steepening and subsequent break-off. We present field geological, petrological and geochronological data on three basement inliers (Taşlıçay, Akdağ and Ilıca) in the region. These areas are made up of amphibolite- to granulite-facies rocks, comprising marble, amphibolite, metapelite, quartzite and metagranite. The granulite-facies domain is equilibrated at 0.7 GPa and 800 ˚C at 83 ± 2 Ma (2σ). The metamorphic rocks are intruded by subduction-related coeval gabbroic, quartz monzonitic to tonalitic rocks. Both the metamorphic rocks and the intrusions are tectonically overlain by ophiolitic rocks. All these crystalline rocks are unconformably overlain by lower Maastrichtien clastic rocks and reefal limestone, suggesting that the exhumation at the earth's surface and juxtaposition with ophiolitic rocks occurred by early Maastrichtien. U-Pb dating on igneous zircon from metagranite yielded a protolith age of 445 ± 10 Ma (2σ). The detrital zircons from a metaquartzite point to Neoproterozoic to Early Paleozoic provenance. All these data favor a more or less continuous continental substrate to the allochthonous ophiolitic rocks beneath the young volcanic-sedimentary cover. The metamorphism and coeval magmatism can be regarded as the middle- to lower-crustal root of the Late Cretaceous magmatic arc that developed due to northward subduction along the Bitlis-Zagros suture. The presence of a continental basement beneath the young cover requires that the loss of the lithospheric mantle from beneath the East

Bayesian probabilistic network approach for managing earthquake risks of cities

DEFF Research Database (Denmark)

Bayraktarli, Yahya; Faber, Michael

2011-01-01

This paper considers the application of Bayesian probabilistic networks (BPNs) to large-scale risk based decision making in regard to earthquake risks. A recently developed risk management framework is outlined which utilises Bayesian probabilistic modelling, generic indicator based risk models...... and a fourth module on the consequences of an earthquake. Each of these modules is integrated into a BPN. Special attention is given to aggregated risk, i.e. the risk contribution from assets at multiple locations in a city subjected to the same earthquake. The application of the methodology is illustrated...... on an example considering a portfolio of reinforced concrete structures in a city located close to the western part of the North Anatolian Fault in Turkey....

Determination of Stearoyl-Coenzyme A Desaturase 1 Gene Variants in South Anatolian Red and East Anatolian Red Cattle

Directory of Open Access Journals (Sweden)

İjlal İpek PAYA

2015-07-01

Full Text Available Fat composition in ruminant’s milk is one of the factors that can affect human health in positive or adverse ways. Optimizing ruminant feed to achieve ideal fatty acid composition in milk has been an ongoing area of research in recent years, without satisfactory results to date. It has been argued that in addition to changes in feed, genetic information can also be utilized to improve milk fatty acid composition. The aim of the study is to investigate the incidence of stearoyl-CoA-desaturase 1 (SCD gene variants, which are claimed to affect fat content and quality of milk in Turkish native cattle breeds. Fifty South Anatolian Red (SAR and 50 East Anatolian Red (EAR cattle were used in the study. The 5th exon of SCD gene was amplified using polymerase chain reaction (PCR and the PCR products were subjected to sequencing analysis. Among the samples sequenced polymorphism at three nucleotide positions have been observed on the 5th exon of the SCD gene, namely A702G, T762C and C878T. Of these three, the polymorphic position C878T was utilized to determine peptide variants of A (293Ala or the V (293 Val of individual samples. Frequency of A variant and AA genotype in SAR and EAR cattle breeds was 0.91 and 0.77 as well as 0.43 and 0.29, respectively. In particular the SAR exhibits a very low frequency of the V allele, believed to have been an ancestral allele. In both samples, 2 individuals were identified to have the VV genotype. The results suggested that high frequency of A allele and AA genotype which confers great advantage on milk composition and meat fatty acid composition was present in SAR and EAR cattle breeds

Aftershock Activity Triggered By the 2014 Earthquake (Mw=6.5), and Its Implications for the Future Seismic Risk in the Marmara Sea, Turkey

Science.gov (United States)

Polat, O.; Kilic, T.; Turkoglu, M.; Kaplan, M.; Kilicarslan, O.; Özer, Ç.; Gok, E.

2014-12-01

We have performed aftershocks analysis triggered by 24.05.2014 (Mw=6.5) Gokceada Island (GI) earthquake where occurred at the W of North Anatolian Fault zone. Mainshock was widely felt in Aegean and Marmara regions of Turkey. Major damage in 228 homes was reported. Other 49 residences suffered moderate or light damage. We have well located 699 events over 1041 by at least 5 stations for one month period after the mainshock. Double difference relocation algorithm allowed us to minimize rms values less than 0.39. Initial results show clear unilateral rupture towards Gallipoli Peninsula at the W of Marmara Sea region. Aftershocks show linearity with an extension of ~110 km length, ~25 km width. Largest aftershock (Mw=5.3) was at the NE end of activation zone. Depths are mainly confined from 5 to 25 km ranges. Two locking depths are detected beneath 8 km in Lemnos Basin and Saros Trough. We also constructed focal mechanisms from regional moment tensor solutions. Digital waveform data obtained from AFAD (Turkey) and HT-AUTH (Greece). Focal mechanisms reflect complex tectonic settings. Nevertheless numerous mechanisms show dominant dextral strike-slip motions aligned NE-SW direction with minor reverse component. State of stress before the mainshock was pure shear regime. But two principal stress axes are observed as oblique for the aftershocks showing ambiguity between compression and shear. It is likely that the mean stress regime has changed after the GI earthquake. If this is so, we may expect that the strike-slip component would slowly increase later in order to recover the conditions existing before. Coulomb stress values rise at the edges of the fault segment due to accumulation of slip. We observed strong spatial correlation between the static stress change after 2014 GI earthquake and the segment that ruptured during the 1912 Murefte-Ganos (Mw=7.4) earthquake. The analysis showed that the areas of positive static stress changes reach to seismic gap in the Marmara

Palaeomagnetism of the Cappadocian Volcanic Succession, Central Turkey: Major ignimbrite emplacement during two short (Miocene) episodes and Neogene tectonics of the Anatolian collage

Science.gov (United States)

Piper, J. D. A.; Koçbulut, F.; Gürsoy, H.; Tatar, O.; Viereck, L.; Lepetit, P.; Roberts, A. P.; Akpınar, Z.

2013-07-01

The Central Anatolian Volcanic Province in Cappadocia includes 13 high volume calc-alkaline ignimbrite sheets emplaced by plinian eruptions within a succession (the Ürgüp Formation) after ~ 10 Ma recording the last phase of Neotethyan subduction and accompanying emplacement of the Tauride orogen in southern Turkey. To evaluate magnetostratigraphy in the context of recent revisions of the chronostratigraphy we have extended palaeomagnetic investigation to 32 new sites yielding significant ChRM directions. Integrated rock magnetic and palaeomagnetic investigations identify magnetic remanence residing predominantly in Ti-poor titanomagnetites although secondary processes within the ignimbrite sheets, notably post-emplacement oxidation, have locally produced hematisation expressed by composite IRM spectra and variable reduction in intensity of magnetisation. The ignimbrite sheets possess weak anisotropies of magnetic susceptibility (AMS, mostly < 5%) describing tensors with axial distributions close to bedding and minimum axes predominantly perpendicular to this plane; collectively directions show weak imbrication correlating with palaeoflow during emplacement predominantly towards the north and east away from the Erdas Dağ, an inferred topographic palaeohigh at the southern margin of the basin. The precise control provided by magnetostratigraphy and radiometric age dating now shows that the bulk of Cappadocian ignimbrite magmatism was concentrated into two short episodes. An older Cardak Centre (Kavak Group and Zelve ignimbrites) produced in excess of 200 km3 of pyroclastic deposits during polarity chron C4r.1n between 9.31 and 9.43 Ma. Subsequent activity from the Acıgöl Centre further to the south west (Cemilköy, Gelveri, Gördeles, and Kızılkaya) produced in excess of 620 km3 of pyroclastic deposits during polarity chrons between 5.3 and 7.1 Ma. The younger İncesu ignimbrite was sourced in the Sultansazlığı pull-apart basin to the east during the Gauss

Factors Affecting Farmers’ Decision to Enter Agricultural Cooperatives Using Random Utility Model in the South Eastern Anatolian Region of Turkey

Directory of Open Access Journals (Sweden)

Bahri Karlı

2006-10-01

Full Text Available Farmers’ decision and perceptions to be a member of agricultural cooperatives in the South Eastern Anatolian Region were investigated. Factors affecting the probability of joining the agricultural cooperatives were determined using binary logit model. The model released that most of variables such as education, high communication, log of gross income, farm size, medium and high technology variables play important roles in determining the probability of entrance. Small farmers are likely expected to join the agricultural cooperatives than the wealthier farmers are. Small farmers may wish to benefit cash at hand, input subsidies, and services provided by the agricultural cooperatives since the risks associated with intensive high-returning crops are high. Some important factors playing pole role in abstention of farmers towards agricultural cooperatives are gross income and some social status variables. In addition, conservative or orthodox farmers are less likely to join agricultural cooperatives than moderate farmers are. We also found that the direct government farm credit programs mainly should be objected to providing farmers to better access to capital markets and creating the opportunity to use with allocation of capital inputs via using modern technology.

Inheritance of coat colour in the Anatolian shepherd dog.

Science.gov (United States)

Robinson, R

1989-01-01

The predominant colour of the Anatolian Shepherd dog varies from a dark fawn to light red, with a variable black muzzle and face (mask). Evidence is presented that the colour is due to the dominant yellow allele (Ay) of the agouti locus. Two other frequent colours are white spotting, due to the piebald allele (sp), and the chinchilla allele (ch). Two rarer colours are the agouti wolf-grey wild type (A+) and a light fawn with a blue facial mask, due to the dilution allele (d).

On the distinction of tectonic and nontectonic faulting in palaeoseismological research: a case study from the southern Marmara region of Turkey

Science.gov (United States)

Özaksoy, Volkan

2017-12-01

This study reports on spectacular deformation structures, including arrays of striated thrusts, discovered by excavation work in Holocene deposits in vicinity of a major neotectonic strike-slip fault in one of the tectonically most active regions of Turkey. The deformation structures were initially considered an evidence of sub-recent tectonic activity, but their detailed multidisciplinary study surprisingly revealed that the deformation of the clay-rich soil and its strongly weathered Jurassic substrate was of nontectonic origin, caused by argilliturbation. This phenomenon of vertisol self-deformation is well-known to pedologists, but may easily be mistaken for tectonic deformation by geologists less familiar with pedogenic processes. The possibility of argilliturbation thus needs to be taken into consideration in palaeoseismological field research wherever the deformed substrate consists of clay-rich muddy deposits. The paper reviews a range of specific diagnostic features that can serve as field criteria for the recognition of nontectonic deformation structures induced by argilliturbation in mud-dominated geological settings.

Risk Factors for Primary Open-Angle Glaucoma in Western Turkey

Directory of Open Access Journals (Sweden)

Güliz Fatma Yavaş

2013-04-01

Full Text Available Pur po se: To evaluate the prevalence of primary open-angle glaucoma (POAG in subjects aged over 40 years in Western Turkey and to quantify its association with several systemic risk factors. Ma te ri al and Met hod: The research was conducted in Afyonkarahisar, a middle Anatolian city, between November 2005 and February 2006. A total of 1533 subjects aged 40 years or more were included in the study. Diabetes mellitus, hypertension, atherosclerotic cardiac disease, obesity, smoking, alcohol consumption, and dietary habitus (meat, chicken, and fish consumption were asked. Level of blood glucose, serum total cholesterol, triglyceride, high-density lipoprotein, low-density lipoprotein, very-low-density lipoprotein, Vitamin B12, and thyroid-stimulating-hormone were determined. Ophthalmic examination was performed, and intraocular pressure was measured by tonopen. Subjects with an IOP of 21 mmHg or more and/or with a cupping/disc ratio of 0.3 or more were told to come to the clinic for visual field analysis and gonioscopy. Subjects with a typical glaucomatous visual field defect and an open angle were recorded as POAG. Risk factors for POAG were determined by chi-square test. Re sults: Prevalence of POAG was found to be 2% (30 subjects and the only associated risk factor was age (p=0.05. Dietary habitus was also not associated with glaucoma (p>0.05. Dis cus si on: This study provides a population-based data about the prevalence and risk factors of POAG in Turkey. (Turk J Ophthalmol 2013; 43: 87-90

Seismotectonics of the Armutlu peninsula (Marmara Sea, NW Turkey) from geological field observation and regional moment tensor inversion

Science.gov (United States)

Kinscher, J.; Krüger, F.; Woith, H.; Lühr, B. G.; Hintersberger, E.; Irmak, T. S.; Baris, S.

2013-11-01

stresses as transtensional faulting is consistent with the southwest directed far field deformation of the Anatolian plate.

Using Facilities And Potential Of Geothermal Resources In The Canakkale Province - NW Turkey

Science.gov (United States)

Deniz, Ozan; Acar Deniz, Zahide

2016-04-01

Turkey, due to its geological location, has a rich potential in point of geothermal resources. Çanakkale province is located northwestern (NW) part of Turkey and it has important geothermal fields in terms of geothermal energy potential. Geothermal resources reach to the surface both effects of past volcanic activity and extensions of fault zones associated with complex tectonic systems in the region. The aim of this study is to summarize hydrogeochemical characteristics, using facilities and potential of hot springs and spas located in the Çanakkale province. There are 13 geothermal fields in the region and the surface temperatures of hot springs are ranging between 28 centigrade degree and 175 centigrade degree. Hydrogeochemical compositions of thermal water display variable chemical compositions. Na, Ca, SO4, HCO3 and Cl are the dominant ions in these waters. Thermal waters of Tuzla and Kestanbol geothermal fields which is located the near coastal area can be noted NaCl type. Because these two geothermal waters have high TDS values, scaling problems are seen around the hot springs and pipelines. Geothermal waters in the province are meteoric origin according to oxygen-18, deuterium and tritium isotopes data. Long underground residence times of these waters and its temperatures have caused both more water - rock interaction and low tritium values. Geothermal energy is utilized in many areas in Turkey today. It is generally used for space heating, balneotherapy and electricity generation. Explorations of geothermal resources and investments in geothermal energy sector have risen rapidly in the recent years particularly in western Turkey. High-temperature geothermal fields are generally located in this region related to the Aegean Graben System and the North Anotalian Fault Zone. All geothermal power plants in Turkey are located in this region. Considering the Çanakkale province, most geothermal fields are suitable for multipurpose usage but many of them have

GIS based spatial pattern analysis: Children with Hepatitis A in Turkey.

Science.gov (United States)

Dogru, Ahmet Ozgur; David, Ruusa Magano; Ulugtekin, Necla; Goksel, Cigdem; Seker, Dursun Zafer; Sözen, Seval

2017-07-01

This study aimed to provide an insight into the geographic distribution of Hepatitis A incidence considering their temporal distribution, spatial patterns, hot spots and clusters identification in three different age-group (0-4, 5-9 and 10-14) in Turkey. Province based tabular data, including monthly numbers of Hepatitis A cases in children, and the populations from 2001 to 2011 were used as the basic input of the study. Time series maps were created using Geographic Information Systems (GIS) to introduce the temporal changes in the morbidity rates of Hepatitis A. The spatial variation of Hepatitis A was measured using Moran's I at the global level and the local indicators of spatial associations (LISAs) Moran's I and Getis-Ord G i *(d) in order to identify influential locations through clusters and hot spots detection of Hepatitis A cases. The morbidity rates in children under the age of 5 were found significantly lower than the other age-groups, whereas the age-group 5-9 revealed the highest morbidity rates in the study area. The morbidity of Hepatitis A was detected very high for the years 2001, and 2005-2007. The identification of the highly vulnerable provinces was conducted using local Moran's I and local Getis-Ord G i *(d). The majority of clusters and hot spots were detected to be agglomerated in the Eastern Mediterranean and South-Eastern Anatolian Regions and Ceyhan, Asi and Southeast part of Firat-Dicle river basins in Turkey. Copyright © 2017 Elsevier Inc. All rights reserved.

'Chemical fingerprints' of pumice from Cappadocia (Turkey) and Kos (Greece) for archaeological applications

International Nuclear Information System (INIS)

Steinhauser, Georg; Sterba, Johannes H.; Bichler, Max

2007-01-01

Pumice has been used as a serviceable abrasive or religious artefact since antiquity and has therefore been an object of trade. It can be found in excavations of ancient workshops all over the Mediterranean. Pumice lumps from the major pumice-bearing rhyolitic tephra units in Cappadocia-the Central Anatolian Volcanic Province, Turkey (in particular the ignimbrites Kavak, Cemilkoey, Tahar, Goerdeles, and the volcanic complexes of Acigoel and Hasan Dagi), were sampled and analyzed for major and trace element concentrations using instrumental neutron activation analysis (INAA). Elements determined were Na, K, Sc, Cr, Fe, Co, Zn, As, Rb, Zr, Sb, Cs, Ba, La, Ce, Nd, Sm, Eu, Tb, Yb, Lu, Hf, Ta, Th, and U. Since the distribution of those elements is characteristic of the products of a certain eruption, this 'chemical fingerprint' can be used to establish the origin of an unknown pumice sample by comparison with samples of known origin. In the course of this study, it could be shown that one pumice finding from the excavation in Miletos (Turkey) probably originates from the Hasan Dagi volcanic complex in Cappadocia. Since it is known that the population in Miletos focused their trade connections on the Mediterranean, this result is somewhat surprising. Two other samples from Miletos show a very high similarity to the chemical fingerprint of pumice from the Kos Plateau Tuff (KPT; Greece): In one case, the identification is doubtless, in the other case identification as KPT seems quite probable

Are turtleback fault surfaces common structural elements of highly extended terranes?

Science.gov (United States)

Çemen, Ibrahim; Tekeli, Okan; Seyitoğlu, Gűrol; Isik, Veysel

2005-12-01

The Death Valley region of the U.S.A. contains three topographic surfaces resembling the carapace of a turtle. These three surfaces are well exposed along the Black Mountain front and are named the Badwater, Copper Canyon, and Mormon Point Turtlebacks. It is widely accepted that the turtlebacks are also detachment surfaces that separate brittlely deformed Cenozoic volcanic and sedimentary rocks of the hanging wall from the strongly mylonitic, ductilely deformed pre-Cenozoic rocks of the footwall. We have found a turtleback-like detachment surface along the southern margin of the Alasehir (Gediz) Graben in western Anatolia, Turkey. This surface qualifies as a turtleback fault surface because it (a) is overall convex-upward and (b) separates brittlely deformed hanging wall Cenozoic sedimentary rocks from the ductilely to brittlely deformed, strongly mylonitic pre-Cenozoic footwall rocks. The surface, named here Horzum Turtleback, contains striations that overprint mylonitic stretching lineations indicating top to the NE sense of shear. This suggests that the northeasterly directed Cenozoic extension in the region resulted in a ductile deformation at depth and as the crust isostatically adjusted to the removal of the rocks in the hanging wall of the detachment fault, the ductilely deformed mylonitic rocks of the footwall were brought to shallower depths where they were brittlely deformed. The turtleback surfaces have been considered unique to the Death Valley region, although detachment surfaces, rollover folds, and other extensional structures have been well observed in other extended terranes of the world. The presence of a turtleback fault surface in western Anatolia, Turkey, suggests that the turtleback faults may be common structural features of highly extended terranes.

Malignant pleural mesothelioma due to environmental mineral fiber exposure in Turkey. Analysis of 135 cases

Energy Technology Data Exchange (ETDEWEB)

Selcuk, Z.T.; Coeplue, L.Em.; Emri, S.; Kalyoncu, A.F.; Sahin, A.A.; Baris, Y.I. (Department of Chest Diseases, Hacettepe University School of Medicine, Ankara (Turkey))

1992-09-01

We reviewed data from 135 patients with environment-associated malignant pleural mesothelioma (MPM) from the Central Anatolian region of Turkey. The most significant factors suggesting the diagnosis of MPM were the village where the patient resided and the typical presenting symptoms and signs of unilateral exudative pleural effusion associated with nonpleuritic chest pain. Computed tomography and ultrasonography were very useful for evaluating the extension of the tumor in the thoracic and abdominal cavities and chest wall. The tissue diagnosis was established by either thoracoscopy (39 percent) or pleural biopsy (39 percent) in the majority of the cases. The median survival after diagnosis was 13.52 months for erionite-associated MPM and 21.56 months for asbestos-associated MPM. The actuarial survival curves for the fibrous minerals were significantly different for survival computed both from onset of the symptoms and after diagnosis. Medical or surgical treatment or both did not change the outcome of the disease.

Mammalian fauna of the Temessos National Park, Turkey

Directory of Open Access Journals (Sweden)

Anna De Marinis

2009-12-01

Full Text Available The National Park of Termessos, Southern Turkey, is one of the Turkey’s biggest national park not only with its archeological richness but also with its great natural wild life. We provided a checklist of the mammalian fauna of the park on the base of direct observations, interviews and a comparative analysis of the available literature. Sixteen species have been reported in the park. Hedgehogs, hares, porcupines and Persian squirrels and, among flying mammals, Egyptian rousette and Mouse-eared bat have been recorded. Carnivores are represented by Golden jackal, Wolf, Red fox, Stone marten, Badger, Otter and Wild cat. Very recently (2005 the presence of the Caracal in the park has been confirmed, whereas no signs of the presence of the Lynx were detected. The last Anatolian leopards seems to have definitively disappeared from the region. The occurrence in the area of striped hyaenas and brown bears is documented up to a few decades ago. The Park is regarded as the only geographical range in the whole world where the European or Common fallow deer has persisted as a native form. Other ungulates too, such as Wild goat and Wild boar are dispersed within the boundary of the park. Management implications are discussed.

Mineralogy, Geochemistry and Stable Isotope Investigation of Gürkuyu Sb Mineralization (Gediz-Kütahya-NW Turkey

Directory of Open Access Journals (Sweden)

Yeşim ÖZEN

2016-11-01

Full Text Available Abstract. The Gürkuyu Sb mineralization is located in the western part of Anatolian tectonic belt, in southern part of İzmir-Ankara zone and in northern part of Menderes Massif. The mineralization located at west of the Koca hill in east of Gürkuyu village of Gediz (Kütahya-Turkey has been characterized through the detailed examinations involving sulfur and oxygen isotope. Serpentinites of Dağardı melange and crystallized limestones of Budağan limestone were hydrothermally altered by hydrothermal solutions, come from fissures and fractures due to tectonic movement during the thrust of melange and occurred silicified zone. Gürkuyu Sb mineralization suggest that occurred in this silicified zone. In Gürkuyu mineralization, primary ore minerals are antimonite and pyrite, secondary ore minerals are senarmontite, valentinite, orpiment and realgar. Quartz and calcite are the most common gangue minerals. In Gürkuyu Sb mineralization, δ34S values of stibnite are ranged from 1.0 ‰ to 1.3 ‰. δ18O values of quartz are ranged is 15.8 ‰ in Gürkuyu mineralization. Sulfur and oxygen isotope values are similar to the values for magmatic rocks and to the values for fluids of magmatic origin.Keywords: Stable isotope, Gürkuyu, Sb mineralization, Gediz, Kütahya, NW Turkey.

Cenozoic Structural and Stratigraphic Evolution of the Ulukışla and Sivas Basins (Central and Eastern Turkey)

Science.gov (United States)

Gürer, Derya; Darin, Michael H.; van Hinsbergen, Douwe J. J.; Umhoefer, Paul J.

2017-04-01

Because subduction is a destructive process, the surface record of subduction-dominated systems is naturally incomplete. Sedimentary basins may hold the most complete record of processes related to subduction, accretion, collision, and ocean closure, and thus provide key information for understanding the kinematic evolution of orogens. In central and eastern Anatolia, the Late Cretaceous-Paleogene stratigraphic record of the Ulukışla and Sivas basins supports the hypothesis that these once formed a contiguous basin. Importantly, their age and geographic positions relative to their very similar basement units and ahead of the Arabian indenter provide a critical record of pre-, syn- and post-collisional processes in the Anatolian Orogen. The Ulukışla-Sivas basin was dissected and translated along the major left-lateral Ecemiş fault zone. Since then, the basins on either side of the fault evolved independently, with considerably more plate convergence accommodated to the east in the Sivas region (eastern Anatolia) than in the Ulukışla region (central Anatolia). This led to the deformation of marine sediments and underlying ophiolites and structural growth of the Sivas Fold-and-Thrust Belt (SSFTB) since latest Eocene time, which played a major role in marine basin isolation and disconnection, along with a regionally important transition to continental conditions with evaporite deposition starting in the early Oligocene. We use geologic mapping, fault kinematic analysis, paleomagnetism, apatite fission track (AFT) thermochronology, and 40Ar/39Ar geochronology to characterize the architecture, deformation style, and structural evolution of the region. In the Ulukışla basin, dominantly E-W trending normal faults became folded or inverted due to N-S contraction since the Lutetian (middle Eocene). This was accompanied by significant counter-clockwise rotations, and post-Lutetian burial of the Niǧde Massif along the transpressional Ecemiş fault zone. Since Miocene

Seismotectonics of Western Turkey: A Synthesis of Source Parameters and Rupture Histories of Recent Earthquakes

Science.gov (United States)

Taymaz, T.; Tan, O.; Yolsal, S.

2004-12-01

The Aegean region, including western Turkey and Greece, is indeed one of the most seismically active and rapidly deforming continental domains in the Earth. The wide range of deformational processes occurring in this region means that the eastern Mediterranean provides a unique opportunity to improve our understanding of the complex kinematics of continental collision, including strike-slip faulting and crustal extension, as well as associated seismicity and volcanism. The tectonic evolution of the Eastern Mediterranean region is dominated by effects of subduction along the Hellenic (Aegean) arc and of continental collision in eastern Anatolia and the Caucasus. Northward subduction of the African plate beneath western Anatolia and the Aegean region is causing crustal extension in the overlying Aegean province. The interplay between dynamic effects of the relative motions of adjoining plates thus controls large-scale crustal deformation and the associated earthquake activity in Turkey. The Aegean region has been subject to extension since Miocene time, and this extension has left a pronounced expression in the present-day topography. It is further widely accepted that the rapid extension observed in western Turkey is mainly accommodated by large active normal faults that control the geomorphology which is dominated by a series of E-W trending normal-fault-bounded horst and graben structures; the N-S extension inferred from these structures is consistent with regional earthquake focal mechanisms. The E-W trending Menderes graben, the NE-SW trending Burdur, Acigol and Baklan, and NW-SE trending Dinar and Sultandag-Aksehir basins all bounded by large faults form a system of half-graben whose orientation is evident in both the topography and the tilting of Neogene sediments adjacent to them. We have studied source mechanisms and rupture histories of ˜20 earthquakes using body-waveform modelling, and have compared the shapes and amplitudes of teleseismic long-period P

GPS Measurements for Detecting Aseismic Creeping in the Ismetpasa Region of North Anatolian Fault Zone, Turkey

Science.gov (United States)

Ozener, H.; Dogru, A.; Turgut, B.; Yilmaz, O.; Halicioglu, K.; Sabuncu, A.

2010-12-01

In 1972, a six point-network was established by General Directorate of Mapping in Gerede-Ismetpasa. This region is relatively quiet segment of western NAF which is creeping along steadily. This network was surveyed by terrestrial techniques in 1972 and 1973. The Ismetpasa Network was re-measured in 1982 and in 1992 by the Geodesy Working Group of Istanbul Technical University. Although the same network (with five points) was observed in 2002 and 2007 by Zonguldak Karaelmas University applying GPS technique, with 1-hour site occupation, the characteristics of movement has not been detected implicitly. This type of movement still raises a question about the accumulation of tectonic movements in the region. Geodesy Department of Kandilli Observatory and Earthquake Research Institute (KOERI) of Bogazici University has been re-surveyed the network by campaign-based static GPS surveying (10-hour site occupation) since 2005. The GPS velocities data coming from geodynamic GPS networks of the crustal deformation studies and the analysis of repeated geodetic observations give us significant information about the elastic deformation. Therefore, data gathered in this study is processed using GAMIT/GLOBK software and analyzed together with previously collected data to obtain velocity field and strain accumulation in the study area.

A Member of Complementary Medicinal Food: Anatolian Royal Jellies, Their Chemical Compositions, and Antioxidant Properties.

Science.gov (United States)

Kolayli, Sevgi; Sahin, Huseyin; Can, Zehra; Yildiz, Oktay; Malkoc, Meltem; Asadov, Alsever

2016-10-01

This study investigated various chemical and antioxidant properties of Anatolian royal jelly samples. Moisture, pH, total protein, 10-hydroxy-2-decenoic acid (10-HDA) and sugars were analyzed from 18 samples. Total phenolic contents, ferric reducing antioxidant capacity and 2,2-diphenyl-1-picryhydrazyl (DPPH) free radical scavenging activity were measured as antioxidant determinants. 10-HDA contents and total protein content of fresh weight ranged between 1.0% and 3.9%, and 11.4% and 15.8%, respectively. The main sugars detected were glucose and fructose. Maltose, trehalose, and melibiose were detected at less than 1.0% in all samples. Lactose, a milk sugar, was detected in only 3 samples, at values between 0.8% and 1.4%. Total henolic content ranged from 91.0 to 301.0 mg gallic acid equivalents/kg fresh weight. Antioxidant activity is due to both to the total phenolic content, proteins and fatty acids of royal jelly. Anatolian royal jelly samples were not different from other royal jelly samples from across the world. © The Author(s) 2015.

Marmara Island earthquakes, of 1265 and 1935; Turkey

Directory of Open Access Journals (Sweden)

Y. Altınok

2006-01-01

Full Text Available The long-term seismicity of the Marmara Sea region in northwestern Turkey is relatively well-recorded. Some large and some of the smaller events are clearly associated with fault zones known to be seismically active, which have distinct morphological expressions and have generated damaging earthquakes before and later. Some less common and moderate size earthquakes have occurred in the vicinity of the Marmara Islands in the west Marmara Sea. This paper presents an extended summary of the most important earthquakes that have occurred in 1265 and 1935 and have since been known as the Marmara Island earthquakes. The informative data and the approaches used have therefore the potential of documenting earthquake ruptures of fault segments and may extend the records kept on earthquakes far before known history, rock falls and abnormal sea waves observed during these events, thus improving hazard evaluations and the fundamental understanding of the process of an earthquake.

Cathodoluminescence (CL) features of the Anatolian agates, hydrothermally deposited in different volcanic hosts from Turkey

Energy Technology Data Exchange (ETDEWEB)

Hatipoglu, Murat, E-mail: murat.hatipoglu@deu.edu.t [Dokuz Eylul University, IMYO, Izmir Multidisciplinary Vocational School, Gemmology and Jewellery Programme, TR-35380 Buca-Izmir (Turkey); Ajo, David [Institute of Inorganic Chemistry and Surfaces, CNR, Corso Stati Uniti 4, I-35127 Padova (Italy); SMATCH (Scientific Methodologies Applied to Cultural Heritage), Largo Ugo Bartolomei 5, I-00136 Rome (Italy); Sezai Kirikoglu, M. [Istanbul Technical University, Faculty of Mine, Department of Geological Engineering, TR-34469 Maslak-Istanbul (Turkey)

2011-06-15

Two different types of multi-colored gem-quality agate samples were investigated. They are both found in the same area in the Cubuk-Ankara region of Turkey although the first group is morphologically and geologically distinct from the second, being nodular-shaped agates occurring in cavity-spaces of a rhyolite host rock with an acidic character. They generally do not have any macroscopic inclusions, but the second group of rather block-shaped agates occurs in the fracture-spaces of an andesite host rock with a more neutral character, i.e. of lower free silica content, and they may display pseudomorphic bar-like macroscopic inclusions. Cathodoluminescence results at room temperature were obtained using measurements with alternating current (AC) (at energies of 14 and 24 keV) as well as direct current (DC) (at 14 keV energy), and they display remarkably different patterns between the two types of agates. It reveals a relation between the CL emissions and the presence of some transition metal elements. It is obvious that all trace elements do not play a direct role. Gaussian fitting of the cathodoluminescence AC experimental data at 14 keV energy obtained from the agates of rhyolite host indicates that there are three major spectral emissions, the dominant one being in the longer-visible wavelength region (red region) at about 690 nm. Additionally, two lesser emission lines occur in the middle-visible wavelength region (yellow region) at about 590 nm, and in the smaller-visible wavelength region (blue region) at about 430 nm. In spite of these, the same data from the agates of andesite host indicate that there is only one remarkable spectral emission which is in the in the middle-visible wavelength region (yellow region) at about 590 nm. On the other hand, Gaussian fitting of the cathodoluminescence AC experimental data at 24 keV energy obtained from the agates of rhyolite host indicates that these initial spectral emissions shift from the red and yellow regions to

The Electrical Resistivity Structure of the Eastern Anatolian Collision Zone, Northeastern Anatolia

Science.gov (United States)

Cengiz, Özlem; Tuǧrul Başokur, Ahmet; Tolak Çiftçi, Elif

2016-04-01

The Northeastern Anatolia is located at the intensely deformed Eastern Anatolian Collision Zone (EACZ), and its tectonic framework is characterized by the collision of the Arabian plate with Eurasian. Although extensive attention is given to understand the crustal and upper mantle processes at this convergent boundary, there is still an ongoing debate over the geodynamic processes of the region. In this study, we were specifically interested in the geoelectric properties and thus geodynamics of the crust beneath the EACZ. Magnetotelluric (MT) measurements were made on two profiles across the north of the EACZ in 1998 as part of a national project undertaken by the Turkish Petroleum Corporation (TPAO). MT data in the frequency range of 300-0.001 Hz were collected from 168 stations located along 78 km north to south and 47 km west to east profiles where direct convergence occurs between Arabian and Eurasian plates. Two and three-dimensional inversion algorithms were used to obtain resistivity models of the study area. According to these models, the upper crust consists of low resistivity sedimentary rocks (basement rocks of the Eastern Anatolian Accretionary Complex and Pontides. While the upper and lower crustal resistivity at the northern part of the study area shows a layered structure, significant horizontal and vertical variations for the rest of the EACZ exists on resistivity models. The broad low resistivity zones (structure supports the southward subduction model with the resistive continental block and the deep conductive zones presumably corresponding to the oceanic crust.

MIGRATIONS OF RELEASED SEISMIC ENERGY IN VARIOUS GEODYNAMIC CONDITIONS

Directory of Open Access Journals (Sweden)

A. V. Novopashina

2018-01-01

Full Text Available The properties of slow seismic activity migration have been revealed by the space-time analysis of the total earthquake energy (LgEsum. Our study of seismic activity covers the fragments of  the Central Asian, Pacific and Alpine seismic belts: the Baikal rift system (BRS, Russia, the San Andreas fault zone (California, USA, the Christchurch fault (New Zealand, the North and East Anatolian faults (Turkey, the Philippine subduction zone, and the central fragment of the Mid-Atlantic oceanic ridge. The chains of LgEsum clusters mark the propagation of the maximum stresses front in the weaker crust areas, the zones of fault dynamic influence, and the regions of conjugated tectonic structures. The migration process is characterized by a periodicity, changes in direction, and similar modular values of the migration rates within a single fault segment (or a fault zone, which is probably related to the mechanical and rheological crust and upper mantle properties. The data analysis shows that a strong earthquake source may occur at a location wherein the front of seismic activity propagates with periodical changes in direction, and such a source can develop within a period that is multiple of the migration fluctuations, probably associated with the influence of external periodic factors. The main periods of migration fluctuations (2–4 years, and 9–13 years, in different ratios are present in the seismic regimes of different seismic belts. The migration rate, as well as the propagation velocity of the maximum stresses front, directly depends on the velocity of movements between the plates in the region.

Integrated geophysical investigations in the Hisar geothermal field, Demirci, western Turkey

Energy Technology Data Exchange (ETDEWEB)

OEzuerlan, Guelcin [Istanbul Technical University, Maslak, Istanbul (Turkey). Faculty of Mines, Geophysical Engineering Department; Sahin, M. Huedavendigar [Department of Geophysics, General Directorate of Mineral Research and Exploration (MTA), Ankara (Turkey)

2006-04-15

The shallow, low-temperature geothermal field of Hisar, in western Turkey, was studied by means of vertical electrical sounding (VES), Wenner, self-potential (SP) and very low-frequency electromagnetic (VLF-EM) profiling surveys. The VES survey, conducted along the valley in an E-W direction, provided lithological and structural information that is in good agreement with the well data, and suggests that the field is characterized by low-resistivity values (=30Om). Because the resistivity structure in a N-S direction could not be investigated due to the rough topography towards the north, SP, Wenner and VLF-EM measurements were made to identify and characterize a possible hot-fluid carrying fault/fracture zone that forms one of the boundaries of the valley. There is a good correlation between the results of the SP, VLF-EM and Wenner surveys, which confirm the existence of the NE-SW striking fault zone that had been inferred from geologic information. Tensional fractures that developed perpendicular to the fault zone were also identified. Consistent with the results of the SP and Wenner profilings, the two-dimensional model derived from VLF-EM data and a Karous-Hjelt current density pseudo-section detected the conductive fault zones bearing the geothermal fluids. (author)

Non-Andersonian conjugate strike-slip faults: Observations, theory, and tectonic implications

International Nuclear Information System (INIS)

Yin, A; Taylor, M H

2008-01-01

Formation of conjugate strike-slip faults is commonly explained by the Anderson fault theory, which predicts a X-shaped conjugate fault pattern with an intersection angle of ∼30 degrees between the maximum compressive stress and the faults. However, major conjugate faults in Cenozoic collisional orogens, such as the eastern Alps, western Mongolia, eastern Turkey, northern Iran, northeastern Afghanistan, and central Tibet, contradict the theory in that the conjugate faults exhibit a V-shaped geometry with intersection angles of 60-75 degrees, which is 30-45 degrees greater than that predicted by the Anderson fault theory. In Tibet and Mongolia, geologic observations can rule out bookshelf faulting, distributed deformation, and temporal changes in stress state as explanations for the abnormal fault patterns. Instead, the GPS-determined velocity field across the conjugate fault zones indicate that the fault formation may have been related to Hagen-Poiseuille flow in map view involving the upper crust and possibly the whole lithosphere based on upper mantle seismicity in southern Tibet and basaltic volcanism in Mongolia. Such flow is associated with two coeval and parallel shear zones having opposite shear sense; each shear zone produce a set of Riedel shears, respectively, and together the Riedel shears exhibit the observed non-Andersonian conjugate strike-slip fault pattern. We speculate that the Hagen-Poiseuille flow across the lithosphere that hosts the conjugate strike-slip zones was produced by basal shear traction related to asthenospheric flow, which moves parallel and away from the indented segment of the collisional fronts. The inferred asthenospheric flow pattern below the conjugate strike-slip fault zones is consistent with the magnitude and orientations of seismic anisotropy observed across the Tibetan and Mongolian conjugate fault zones, suggesting a strong coupling between lithospheric deformation and asthenospheric flow. The laterally moving

Non-Andersonian conjugate strike-slip faults: Observations, theory, and tectonic implications

Energy Technology Data Exchange (ETDEWEB)

Yin, A [Department of Earth and Space Sciences and Institute of Geophysics and Planetary Physics, University of California, Los Angeles, Los Angeles, CA 90025-1567 (United States); Taylor, M H [Department of Geology, University of Kansas, 1475 Jayhawk Blvd., Lawrence, KS 66044 (United States)], E-mail: yin@ess.ucla.edu

2008-07-01

Formation of conjugate strike-slip faults is commonly explained by the Anderson fault theory, which predicts a X-shaped conjugate fault pattern with an intersection angle of {approx}30 degrees between the maximum compressive stress and the faults. However, major conjugate faults in Cenozoic collisional orogens, such as the eastern Alps, western Mongolia, eastern Turkey, northern Iran, northeastern Afghanistan, and central Tibet, contradict the theory in that the conjugate faults exhibit a V-shaped geometry with intersection angles of 60-75 degrees, which is 30-45 degrees greater than that predicted by the Anderson fault theory. In Tibet and Mongolia, geologic observations can rule out bookshelf faulting, distributed deformation, and temporal changes in stress state as explanations for the abnormal fault patterns. Instead, the GPS-determined velocity field across the conjugate fault zones indicate that the fault formation may have been related to Hagen-Poiseuille flow in map view involving the upper crust and possibly the whole lithosphere based on upper mantle seismicity in southern Tibet and basaltic volcanism in Mongolia. Such flow is associated with two coeval and parallel shear zones having opposite shear sense; each shear zone produce a set of Riedel shears, respectively, and together the Riedel shears exhibit the observed non-Andersonian conjugate strike-slip fault pattern. We speculate that the Hagen-Poiseuille flow across the lithosphere that hosts the conjugate strike-slip zones was produced by basal shear traction related to asthenospheric flow, which moves parallel and away from the indented segment of the collisional fronts. The inferred asthenospheric flow pattern below the conjugate strike-slip fault zones is consistent with the magnitude and orientations of seismic anisotropy observed across the Tibetan and Mongolian conjugate fault zones, suggesting a strong coupling between lithospheric deformation and asthenospheric flow. The laterally moving

Mantle to Surface Dynamics Across Subduction-Collision Transitions in Space and Time: Results from the CD-CAT Project in Anatolia

Science.gov (United States)

Whitney, D. L.; Abgarmi, B.; Beck, S. L.; Brocard, G. Y.; Cosca, M. A.; Darin, M. H.; Delph, J. R.; Hui, H.; Kahraman, M.; Kaymakci, N.; Kuscu, G.; Meijers, M. J.; Mulch, A.; Özacar, A.; Portner, D. E.; Reid, M. R.; Rey, P. F.; Rojay, B.; Schlieffarth, W. K.; Sandvol, E. A.; Schoenbohm, L. M.; Tank, B.; Teoman, U.; Teyssier, C. P.; Thomson, S. N.; Turkelli, N.; Umhoefer, P. J.; Uslular, G.; Willenbring, J. K.

2017-12-01

From west to east, the southern plate boundary of Anatolia varies from subduction to continental collision; plate dynamics are influenced by the interaction of back-arc extension in the west (Aegean) and convergence in the east (Arabia-Eurasia). Prior to 40 Ma, the entire margin was a subduction zone. The NSF project "Continental Dynamics-Central Anatolian Tectonics (CD-CAT)" has contributed to understanding how the mantle, crust, and surface evolve in subduction-to-collision transitions in time and space. Differences are seen in changes in deformation style as collision proceeded; e.g. from distributed across a broad zone to highly localized on a series of oblique-slip faults, and from transpression to transtension (W of the Central Anatolian fault zone, CAFZ) or strike-slip (E of the CAFZ); age, composition, and sources of magmatism, including a magmatic lull from 40-20 Ma, followed by expansion of magmatism SE-ward in central Anatolia; properties and architecture of the lithosphere and sub-lithospheric mantle (e.g. significant and locally abrupt crustal thickness variations, including thick crust under the Tauride Mts; thin to absent lithospheric mantle; and a torn and disaggregating slab that varies from shallow to steep below central Anatolia); and a topographic gradient from a high eastern plateau (> 2 km) to a central plateau (1-1.5 km) bounded to the N and S by mountain ranges that rose > 2 km from the sea between 11-5 Ma, producing a rain shadow in the Anatolian interior. Thermochronologic and structural studies of exhumed mid-crust and associated basins and fault zones as well as geophysical data for Anatolia today show the extent to which inherited features (suture zones, faults) have affected the tectonic evolution of Anatolia, particularly in the vicinity of the CAFZ/East Anatolian Fault, and mantle properties. Results also show that the Miocene was a dynamic time in the thermal and mechanical evolution of the region, as early Miocene rollback

Geophysical Data (Gravity and Magnetic) from the Area Between Adana, Kahramanmaras and Hatay in the Eastern Mediterranean Region: Tectonic Implications

Science.gov (United States)

Over, Semir; Akin, Ugur; Sen, Rahime

2018-01-01

The gravity and magnetic maps of the area between Adana-Kahramanmaras-Hatay provinces were produced from a compilation of data gathered during the period between 1973 and 1989. Reduced to the pole (RTP) and pseudo-gravity transformation (PGT) methods were applied to the magnetic data, while derivative ratio (DR) processing was applied to both gravity and magnetic data, respectively. Bouguer, RTP and PGT maps show the image of a buried structure corresponding to ophiolites under undifferentiated Quaternary deposits in the Adana depression and Iskenderun Gulf. DR maps show two important faults which reflect the tectonic framework in the study area: (1) the Karatas-Osmaniye Fault extending from Osmaniye to Karatas in the south between Adana and Iskenderun depressions and (2) Amanos Fault (southern part of East Anatolian Fault) in the Hatay region running southward from Turkoglu to Amik Basin along Amanos Mountain forming the actual plate boundary between the Anatolian block (part of Eurasian plate) and Arabian plate.

Geothermal Field Investigations of Turkey

Science.gov (United States)

Sayın, N.; Özer, N.

2017-12-01

Geothermal energy is a type of energy that are found in the accessible depth of the crust, in the reservoirs by way of the permeable rocks, specially in heated fluid. Geothermal system is made of 3 main components; heat source, reservoir, and fluid bearing heat. Geothermal system mechanism is comprise of fluid transmission. Convection current (heat transmission) is caused by heating and causes the fluid in the system to expand. Heated fluid with low density show tendency to rise in system. Geothermal system occurs with variable geophysics and geochemical properties. Geophysical methods can determine structural properties of shallow and deep reservoirs with temperature, mineralization, gas amount, fluid movement, faulting, and sudden change in lithostratigraphic strata. This study revealed possible reservoir structures and showed examples of geophysics and gas measuring results in Turkey which is wealthy in regard to Geothermal sources.

Petrographic properties of major coal seams in Turkey and their formation

Energy Technology Data Exchange (ETDEWEB)

Toprak, Selami [Mineral Research and Exploration Directorate (MTA), 06520 Ankara (Turkey)

2009-06-01

Most types of coal in Turkey are generally low in rank: lignite, and subbituminous. Most of the coal was formed during the Miocene, Eocene, and Pliocene ages. There are only a few thin Jurassic-age coal occurrences in Turkey. Pennsylvanian age bituminous coal is found on the Black Sea coast. General implications of the petrographic properties of Turkey's coal seams and coal deposits have not yet been taken into consideration comparatively or as a whole. For this study, about 190 channel samples were collected from different locales. The composite profile samples of the seams were taken into considerations. The content and depositional properties as well as some chemical and physical properties of the main coal seams are compared. All coal samples tend to have similar coal petrographic properties and were deposited in intermontane lacustrine basins. Later, they were affected by faulting and post-depositional volcanic activity. As a result, there are variations in the properties and rank of the coal samples. The most abundant coal maceral group is huminite and the most abundant maceral is gelinite. The liptinite and inertinite contents of the coal are low and the maceral contents of the coals show great similarity. The depositional environments of the all coals are lacustrine dominated. (author)

Bodrum Strong Motion Network, Mugla, Turkey

Science.gov (United States)

Alcik, H. A.; Tanircan, G.; Korkmaz, A.

2015-12-01

The Gulf of Gökova is located in southwestern Turkey near the Aegean Sea and surrounded by Datça Peninsula to the south, the island of Kos to the west and Bodrum Peninsula to the north. The Bodrum peninsula with a population of one million in summer season is one of the most populated touristic centers of Turkey. This region is also surrounded by numerous active seismic entities such as Ula-Ören Fault Zone, Gökova Graben etc.. and demonstrates high seismic hazard. In the past, many destructive earthquakes have occurred in southwestern Turkey. One of the destructive historical earthquakes is 1493 Kos event (Mw=6.9) caused heavy damage in Bodrum. In the instrumental period seismic activity in the Gökova region includes the Ms>6.0 earthquakes of 23 April 1933 (Ms=6.4), 23 May 1941 (Ms=6.0), 13 December 1941 (Ms=6.5) events. Intense earthquake activity (Mw5+) occurred in Gulf of Gökova in August 2004 and January 2005. Considering the high seismicity and population of this region, a strong ground motion monitoring system stationed in dense settlements in the Bodrum Peninsula: Bodrum, Turgutreis, Yalıkavak, Çiftlik and Ortakent was deployed on June 2015. The network consists of 5 strong motion recorders, has been set up with the aim of monitoring of regional earthquakes, collecting accurate and reliable data for engineering and scientific research purposes, in particular to provide input for future earthquake rapid reporting and early warning implementation projects on urban environments in the Bodrum peninsula and the surrounding areas. In this poster presentation, we briefly introduce the Bodrum Network and discuss our future plans for further developments.

Inter population variability of frost-resistance in provenances of scot pines (Pinusylvestris L.R. hamata Steven in Turkey

Directory of Open Access Journals (Sweden)

Özel Halil Barış

2016-01-01

Full Text Available Frost-resistance variability of Scotch pine (Pinus sylvestris L. var. hamata Steven seedlings grown in nurseries conditions, originated from 10 provenances, have been analyzed. The provenances from Black Sea region, Central Anatolian region and Eastern Anatolian region in Turkey have been used in selection of seed zones. The results of frost-resistance tests indicated a strong relationship of implemented freezing degrees with injury degrees of Scotch pine needles and photosynthetic productivities. On the other hand, another significant relationship has been determined between chlorophyll fluorescence and ion leakage methods (r=-0.801. This result shows that those two methods can be safely used in determining the damages due to low temperatures. In frost resistance tests, Scotch pine seedlings from different provenances have been frozen at -10, -20, -30 and -40°C. According to the Duncan test results, it has been determined that damage increased as temperature decreased. The damage level at -10°C implementation is 3.5% which can be tolerated by plants. But when the temperature has been decreased to -20°C, the level of damage has increased to 51.25%. As a result of photosynthetic analyses in this phase, it has been determined that there is a statistically significant relationship between provenances and temperature levels. Under the light of those findings, they have determined that the photosynthetic productivity has significantly decreased at temperatures between -20°C and -40°C. This situation conforms to injury index values determined in this study. As a result of injury index and photosynthetic productivity tests used for determining the damage after frost-resistance tests, it has been determined that the provenances of Amasya-Kunduz, Bolu-Aladağ, Düzce-Yığılca, Samsun-Vezirköprü and Eskişehir-Çatacık are more sensitive to frost than other provenances.

Integrated geophysical investigations in a fault zone located on southwestern part of İzmir city, Western Anatolia, Turkey

Science.gov (United States)

Drahor, Mahmut G.; Berge, Meriç A.

2017-01-01

Integrated geophysical investigations consisting of joint application of various geophysical techniques have become a major tool of active tectonic investigations. The choice of integrated techniques depends on geological features, tectonic and fault characteristics of the study area, required resolution and penetration depth of used techniques and also financial supports. Therefore, fault geometry and offsets, sediment thickness and properties, features of folded strata and tectonic characteristics of near-surface sections of the subsurface could be thoroughly determined using integrated geophysical approaches. Although Ground Penetrating Radar (GPR), Electrical Resistivity Tomography (ERT) and Seismic Refraction Tomography (SRT) methods are commonly used in active tectonic investigations, other geophysical techniques will also contribute in obtaining of different properties in the complex geological environments of tectonically active sites. In this study, six different geophysical methods used to define faulting locations and characterizations around the study area. These are GPR, ERT, SRT, Very Low Frequency electromagnetic (VLF), magnetics and self-potential (SP). Overall integrated geophysical approaches used in this study gave us commonly important results about the near surface geological properties and faulting characteristics in the investigation area. After integrated interpretations of geophysical surveys, we determined an optimal trench location for paleoseismological studies. The main geological properties associated with faulting process obtained after trenching studies. In addition, geophysical results pointed out some indications concerning the active faulting mechanism in the area investigated. Consequently, the trenching studies indicate that the integrated approach of geophysical techniques applied on the fault problem reveals very useful and interpretative results in description of various properties of faulting zone in the investigation site.

Need for denser geodetic network to get real constrain on the fault behavior along the Main Marmara Sea segments of the NAF, toward an optimized GPS network.

Science.gov (United States)

Klein, E.; Masson, F.; Duputel, Z.; Yavasoglu, H.; Agram, P. S.

2016-12-01

Over the last two decades, the densification of GPS networks and the development of new radar satellites offered an unprecedented opportunity to study crustal deformation due to faulting. Yet, submarine strike slip fault segments remain a major issue, especially when the landscape appears unfavorable to the use of SAR measurements. It is the case of the North Anatolian fault segments located in the Main Marmara Sea, that remain unbroken ever since the Mw7.4 earthquake of Izmit in 1999, which ended a eastward migrating seismic sequence of Mw > 7 earthquakes. Located directly offshore Istanbul, evaluation of seismic hazard appears capital. But a strong controversy remains over whether these segments are accumulating strain and are likely to experience a major earthquake, or are creeping, resulting both from the simplicity of current geodetic models and the scarcity of geodetic data. We indeed show that 2D infinite fault models cannot account for the complexity of the Marmara fault segments. But current geodetic data in the western region of Istanbul are also insufficient to invert for the coupling using a 3D geometry of the fault. Therefore, we implement a global optimization procedure aiming at identifying the most favorable distribution of GPS stations to explore the strain accumulation. We present here the results of this procedure that allows to determine both the optimal number and location of the new stations. We show that a denser terrestrial survey network can indeed locally improve the resolution on the shallower part of the fault, even more efficiently with permanent stations. But data closer from the fault, only possible by submarine measurements, remain necessary to properly constrain the fault behavior and its potential along strike coupling variations.

The battle of Gallipoli: The politics of remembering and forgetting in Turkey

Directory of Open Access Journals (Sweden)

Yücel Yanıkdağ

2015-02-01

Full Text Available Differences in the competing versions of public memory for the Battle of Gallipoli have become more pronounced as we approach 18 March 2015 (in Turkey 18 March, the naval battle, marks the anniversary, not the landing of 25 April. For many decades, the official nationalist narrative portrayed Gallipoli as a “rehearsal” for or even as part of the War of Independence (1919-1922.  The victory was due almost solely to the military genius of Mustafa Kemal. This public memory might have been dominant for decades, but competing versions also developed. This article will largely deal with what can be called the Islamized or “religionised” memory of Gallipoli.  For some who adhere to this view, Gallipoli is where the “Turkish” soldier stopped the last Crusaders. For others, their version of the battle does not include Mustafa Kemal. Yet, both sides have something in common as they prepare to celebrate the victory. Both the nationalist and the Islamist memories ignore the possible connections to another event which is remembered on 24 April, the day before the Entente landing in Gallipoli: the order given for the deportation of Anatolian Armenians. The “celebration” for one is likely to overwhelm the remembrance and mourning of the other.

A survey of rate of victimization and attitudes towards physical violence among school-aged children in Turkey.

Science.gov (United States)

Deveci, S E; Acik, Y; Ayar, A

2008-01-01

Violence of any type is a serious issue in the lives of many children from all racial, cultural and economic backgrounds, and is a topic of enormous societal concern in any society. The purpose of this study was to examine the rate of exposure to violence as victims, and attitudes towards physical violence among school-aged children in eastern Turkey. All the basic education schools in Elazig, a typical eastern Anatolian city, were included. A total of 3725 fifth and sixth graders were asked to answer survey questions about the rate of physical violence exposure in their everyday lives and whether they thought the violence was an 'acceptable' behaviour. The mean age of participants was 12.8 years with 46.8% boys and 53.2% girls, and their socio-economic status ranged from low-income to upper middle class. Seventy-four per cent of school-aged children reported exposure to at least one case of physical violence in their lives, and 43.4% reported experiencing physical violence within previous 12 months. Higher rates of exposure to physical violence were reported by boys than girls (P = 0.0001). Of the victims, 33.8% regarded physical violence as an acceptable or inevitable way of solution or responding to life events. Results from the self-report of the receiving end of violent behaviours indicate that physical violent victimization is at an alarmingly high rate among children of eastern Turkey, and a significant per cent of these victims approves violence as a way of solution.

Insights into the 3D architecture of an active caldera ring-fault at Tendürek volcano through modeling of geodetic data

KAUST Repository

Vasyura-Bathke, Hannes; Nikkhoo, M.; Holohan, E.P.; Walter, T.R.

2015-01-01

of spatially dense InSAR time-series data, numerical models and sand-box experiments to determine the three-dimensional geometry and kinematics of a sub-surface ring-fault at Tendürek volcano in Turkey. The InSAR data reveal that the area within the ring

An expert system for the quantification of fault rates in construction fall accidents.

Science.gov (United States)

Talat Birgonul, M; Dikmen, Irem; Budayan, Cenk; Demirel, Tuncay

2016-01-01

Expert witness reports, prepared with the aim of quantifying fault rates among parties, play an important role in a court's final decision. However, conflicting fault rates assigned by different expert witness boards lead to iterative objections raised by the related parties. This unfavorable situation mainly originates due to the subjectivity of expert judgments and unavailability of objective information about the causes of accidents. As a solution to this shortcoming, an expert system based on a rule-based system was developed for the quantification of fault rates in construction fall accidents. The aim of developing DsSafe is decreasing the subjectivity inherent in expert witness reports. Eighty-four inspection reports prepared by the official and authorized inspectors were examined and root causes of construction fall accidents in Turkey were identified. Using this information, an evaluation form was designed and submitted to the experts. Experts were asked to evaluate the importance level of the factors that govern fall accidents and determine the fault rates under different scenarios. Based on expert judgments, a rule-based expert system was developed. The accuracy and reliability of DsSafe were tested with real data as obtained from finalized court cases. DsSafe gives satisfactory results.

Phase-ramp reduction in interseismic interferograms from pixel-offsets

KAUST Repository

Wang, Teng; Jonsson, Sigurjon

2014-01-01

Interferometric synthetic aperture radar (InSAR) is increasingly used to measure interseismic deformation. Inaccurate satellite-orbit information, expressed as phase ramps across interseismic interferograms, is believed to be one of the main sources of error in such measurements. However, many interferograms exhibit higher phase gradients than expected from the reported orbital accuracy, suggesting that there are other error sources. Here, we show that interferogram phase ramps are in part caused by uncorrected satellite timing-parameter errors. We propose a two-step approach to reduce the phase ramps using pixel-offsets estimated between SAR amplitude images. The first step involves using a digital elevation model (DEM) to estimate absolute timing-parameter errors for the reference image of the SAR dataset and the second step updates the timing parameters of the master image for each interferogram. We demonstrate a clear ramp reduction on interseismic interferograms covering the North Anatolian Fault in eastern Turkey. The resulting interferograms show clear signs of interseismic deformation even before stacking. © 2014 IEEE.

Phase-ramp reduction in interseismic interferograms from pixel-offsets

KAUST Repository

Wang, Teng

2014-05-01

Interferometric synthetic aperture radar (InSAR) is increasingly used to measure interseismic deformation. Inaccurate satellite-orbit information, expressed as phase ramps across interseismic interferograms, is believed to be one of the main sources of error in such measurements. However, many interferograms exhibit higher phase gradients than expected from the reported orbital accuracy, suggesting that there are other error sources. Here, we show that interferogram phase ramps are in part caused by uncorrected satellite timing-parameter errors. We propose a two-step approach to reduce the phase ramps using pixel-offsets estimated between SAR amplitude images. The first step involves using a digital elevation model (DEM) to estimate absolute timing-parameter errors for the reference image of the SAR dataset and the second step updates the timing parameters of the master image for each interferogram. We demonstrate a clear ramp reduction on interseismic interferograms covering the North Anatolian Fault in eastern Turkey. The resulting interferograms show clear signs of interseismic deformation even before stacking. © 2014 IEEE.

Evolution of and Factors Controlling Eocene Sedimentation in the Darende-Balaban Basin, Malatya (Eastern Turkey)

OpenAIRE

GÜL, KEMAL GÜRBÜZ & MURAT

2005-01-01

Collision of the Arabian and Anatolian plates affected evolution of basins located along the southern flank of the Anatolian Plate. The Darende-Balaban foreland basin is one such basin – a basin filled with Upper Cretaceous and Eocene sediments, accumulated unconformably and transgressively above ophiolitic and carbonate basement rocks. This basin is locally surrounded, to the north and south, by Late Jurassic–Early Cretaceous structural highs created by tectonic elements during the collision...

Evolution of and Factors Controlling Eocene Sedimentation in the Darende-Balaban Basin, Malatya (Eastern Turkey)

OpenAIRE

GÜL, KEMAL GÜRBÜZ & GÜL, MURAT

2014-01-01

Collision of the Arabian and Anatolian plates affected evolution of basins located along the southern flank of the Anatolian Plate. The Darende-Balaban foreland basin is one such basin – a basin filled with Upper Cretaceous and Eocene sediments, accumulated unconformably and transgressively above ophiolitic and carbonate basement rocks. This basin is locally surrounded, to the north and south, by Late Jurassic–Early Cretaceous structural highs created by tectonic elements during the collision...

Effects of Strike-Slip Fault Segmentation on Earthquake Energy and Seismic Hazard

Science.gov (United States)

Madden, E. H.; Cooke, M. L.; Savage, H. M.; McBeck, J.

2014-12-01

Many major strike-slip faults are segmented along strike, including those along plate boundaries in California and Turkey. Failure of distinct fault segments at depth may be the source of multiple pulses of seismic radiation observed for single earthquakes. However, how and when segmentation affects fault behavior and energy release is the basis of many outstanding questions related to the physics of faulting and seismic hazard. These include the probability for a single earthquake to rupture multiple fault segments and the effects of segmentation on earthquake magnitude, radiated seismic energy, and ground motions. Using numerical models, we quantify components of the earthquake energy budget, including the tectonic work acting externally on the system, the energy of internal rock strain, the energy required to overcome fault strength and initiate slip, the energy required to overcome frictional resistance during slip, and the radiated seismic energy. We compare the energy budgets of systems of two en echelon fault segments with various spacing that include both releasing and restraining steps. First, we allow the fault segments to fail simultaneously and capture the effects of segmentation geometry on the earthquake energy budget and on the efficiency with which applied displacement is accommodated. Assuming that higher efficiency correlates with higher probability for a single, larger earthquake, this approach has utility for assessing the seismic hazard of segmented faults. Second, we nucleate slip along a weak portion of one fault segment and let the quasi-static rupture propagate across the system. Allowing fractures to form near faults in these models shows that damage develops within releasing steps and promotes slip along the second fault, while damage develops outside of restraining steps and can prohibit slip along the second fault. Work is consumed in both the propagation of and frictional slip along these new fractures, impacting the energy available

African Journal of Biotechnology - Vol 12, No 33 (2013)

African Journals Online (AJOL)

An evaluation of some mutant cotton (Gossypium hirsutum L.) varieties from Azerbaijan in Southeast Anatolian region of Turkey · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. EFE Lale, Fatih Killi, Sefer Mustafayev. http://dx.doi.org/10.5897/AJB11.1785 ...

The rheological structure of the lithosphere in the Eastern Marmara region, Turkey

Science.gov (United States)

Oruç, Bülent; Sönmez, Tuba

2017-05-01

The aim of this work is to propose the geometries of the crustal-lithospheric mantle boundary (Moho) and lithosphere-asthenosphere boundary (LAB) and the 1D thermal structure of the lithosphere, in order to establish a rheological model of the Eastern Marmara region. The average depths of Moho and LAB are respectively 35 km and 51 km from radially averaged amplitude spectra of EGM08 Bouguer anomalies. The geometries of Moho and LAB interfaces are estimated from the Parker-Oldenburg gravity inversion algorithm. Our results show the Moho depth varies from 31 km at the northern part of North Anatolian Fault Zone (NAFZ) to 39 km below the mountain belt in the southern part of the NAFZ. The depth to the LAB beneath the same parts of the region ranges from 45 km to 55 km. Having lithospheric strength and thermal boundary layer structure, we analyzed the conditions of development of lithosphere thinning. A two-dimensional strength profile has been estimated for rheology model of the study area. Thus we suggest that the rheological structure consists of a strong upper crust, a weak lower crust, and a partly molten upper lithospheric mantle.

Along-strike structural variation and thermokinematic development of the Cenozoic Bitlis-Zagros fold-thrust belt, Turkey and Iraqi Kurdistan

Science.gov (United States)

Barber, Douglas E.; Stockli, Daniel F.; Koshnaw, Renas I.; Tamar-Agha, Mazin Y.; Yilmaz, Ismail O.

2016-04-01

The Bitlis-Zagros orogen in northern Iraq is a principal element of the Arabia-Eurasia continent collision and is characterized by the lateral intersection of two structural domains: the NW-SE trending Zagros proper system of Iran and the E-W trending Bitlis fold-thrust belt of Turkey and Syria. While these components in northern Iraq share a similar stratigraphic framework, they exhibit along-strike variations in the width and style of tectonic zones, fold morphology and trends, and structural inheritance. However, the distinctions of the Bitlis and Zagros segments remains poorly understood in terms of timing and deformation kinematics as well as first-order controls on fold-thrust development. Structural and stratigraphic study and seismic data combined with low-T thermochronometry provide the basis for reconstructions of the Bitlis-Zagros fold-thrust belt in southeastern Turkey and northern Iraq to elucidate the kinematic and temporal relationship of these two systems. Balanced cross-sections were constructed and incrementally restored to quantify the deformational evolution and use as input for thermokinematic models (FETKIN) to generate thermochronometric ages along the topographic surface of each cross-section line. The forward modeled thermochronometric ages from were then compared to new and previously published apatite and zircon (U-Th)/He and fission-track ages from southeastern Turkey and northern Iraq to test the validity of the timing, rate, and fault-motion geometry associated with each reconstruction. The results of these balanced theromokinematic restorations integrated with constraints from syn-tectonic sedimentation suggest that the Zagros belt between Erbil and Suleimaniyah was affected by an initial phase of Late Cretaceous exhumation related to the Proto-Zagros collision. During the main Zagros phase, deformation advanced rapidly and in-sequence from the Main Zagros Fault to the thin-skinned frontal thrusts (Kirkuk, Shakal, Qamar) from middle

Economic and Strategic Expectations from Trans Anatolian Natural Gas Pipeline Project

Directory of Open Access Journals (Sweden)

Elchin Suleymanov

2016-12-01

Full Text Available Following the successful implementation of the oil strategy, Azerbaijan began to define strategic objectives in relation to gas export policy. Currently, Azerbaijan is the only country in the region exporting gas to the international markets (Turkey, Russia, Georgia. For this reason, it is seen as “the provider and participant” of Southern Gas Corridor by EU. In this direction, Azerbaijan aims to be the country of an important and strategic natural gas exporter. From Shahdeniz field to the end European user, it targets to take part in the every ring of the value chain. These assumptions bring Azerbaijan to the position of a remarkable natural gas supplier for the export of large amount of gas to the European markets through Nabucco West. The implementation of the project with financial and technical capabilities of Azerbaijan and Turkey has made it a project to be realized between Turkey-Azerbaijan. TANAP means Turkey and Azerbaijan will emerge together in the European market for energy transportation. Along with Baku-Tbilisi-Ceyhan and Baku-Tbilisi-Erzurum, TANAP has reinforced Turkey’s position as a necessary energy corridor in delivering the energy resources of the Caspian Sea to the Western markets. In this paper, expected strategic and economic outcomes of TANAP are analyzed.

Sedimentary records of past earthquakes in Boraboy Lake during the last ca 600 years (North Anatolian Fault, Turkey)

KAUST Repository

Avsar, Ulas; Hubert-Ferrari, Auré lia; De Batist, Marc; Schmidt, Sabine; Fagel, Nathalie

2015-01-01

is interrupted by four mass-wasting deposits (MWD) of which thickness range between 15 and 50 cm. High-resolution ITRAX μXRF data confirms higher homogeneity along the MWDs (E1-E4) compared to the background sedimentation. Based on 137Cs and 210Pbxs dating

Tsunami Loss Assessment For Istanbul

Science.gov (United States)

Hancilar, Ufuk; Cakti, Eser; Zulfikar, Can; Demircioglu, Mine; Erdik, Mustafa

2010-05-01

Tsunami risk and loss assessment incorporating with the inundation mapping in Istanbul and the Marmara Sea region are presented in this study. The city of Istanbul is under the threat of earthquakes expected to originate from the Main Marmara branch of North Anatolian Fault System. In the Marmara region the earthquake hazard reached very high levels with 2% annual probability of occurrence of a magnitude 7+ earthquake on the Main Marmara Fault. Istanbul is the biggest city of Marmara region as well as of Turkey with its almost 12 million inhabitants. It is home to 40% of the industrial facilities in Turkey and operates as the financial and trade hub of the country. Past earthquakes have evidenced that the structural reliability of residential and industrial buildings, as well as that of lifelines including port and harbor structures in the country is questionable. These facts make the management of earthquake risks imperative for the reduction of physical and socio-economic losses. The level of expected tsunami hazard in Istanbul is low as compared to earthquake hazard. Yet the assets at risk along the shores of the city make a thorough assessment of tsunami risk imperative. Important residential and industrial centres exist along the shores of the Marmara Sea. Particularly along the northern and eastern shores we see an uninterrupted settlement pattern with industries, businesses, commercial centres and ports and harbours in between. Following the inundation maps resulting from deterministic and probabilistic tsunami hazard analyses, vulnerability and risk analyses are presented and the socio-economic losses are estimated. This study is part of EU-supported FP6 project ‘TRANSFER'.

Deconvolution effect of near-fault earthquake ground motions on stochastic dynamic response of tunnel-soil deposit interaction systems

Directory of Open Access Journals (Sweden)

K. Hacıefendioğlu

2012-04-01

Full Text Available The deconvolution effect of the near-fault earthquake ground motions on the stochastic dynamic response of tunnel-soil deposit interaction systems are investigated by using the finite element method. Two different earthquake input mechanisms are used to consider the deconvolution effects in the analyses: the standard rigid-base input and the deconvolved-base-rock input model. The Bolu tunnel in Turkey is chosen as a numerical example. As near-fault ground motions, 1999 Kocaeli earthquake ground motion is selected. The interface finite elements are used between tunnel and soil deposit. The mean of maximum values of quasi-static, dynamic and total responses obtained from the two input models are compared with each other.

Dermatologic manifestations of tularemia: a study of 151 cases in the mid-Anatolian region of Turkey.

Science.gov (United States)

Şenel, Engin; Satılmış, Özgür; Acar, Bilal

2015-01-01

Tularemia is a serious and potentially life-threatening zoonosis caused by Francisella tularensis, a highly infective, gram-negative coccobacillus. Although there are plenty of case reports and studies of tularemia outbreaks, the literature is lacking in reports on dermatologic manifestations of the disease. This study aimed to identify skin manifestations in clinical forms of tularemia. A total of 151 patients diagnosed with tularemia at Çankırı State Hospital, Çankırı, Turkey, were retrospectively examined. Dermatologic data for these patients were assessed. The most frequent clinical manifestation of tularemia was the glandular form (49.7%), followed by the oropharyngeal, ulceroglandular, and oculoglandular forms (39.1, 6.0, and 5.3%, respectively). Physical manifestations were observed in 64.5% of females and 56.9% of males. Lymphadenopathy and tonsillitis were the most frequent physical findings and were noted in 57.6 and 25.2% of patients, respectively. Erythema multiforme was found in 17 patients (11.3%), most of whom presented with the oropharyngeal and glandular forms, and was followed by ulcer (6.0%), urticaria (3.3%), erythema nodosum (2.6%), and cellulitis (0.7%). However, it should be noted that this study was retrospective and that its patient sample demonstrated four of the six clinical forms of tularemia. Patients with the oropharyngeal form of tularemia had statistically significantly more physical findings than those with other clinical forms of the disease (P < 0.001). There were statistically more skin findings in the ulceroglandular form (P < 0.001). There was no statistical correlation between serum antibody titers and cutaneous findings (P = 0.585). Although the literature reports that skin lesions are observed more frequently in women than in men, we did not find any statistically significant difference between the sexes in any type of skin lesion. © 2014 The International Society of Dermatology.

The use of infrared thermography to detect the stages of estrus cycle and ovulation time in anatolian shepherd dogs.

Science.gov (United States)

Olğaç, Kemal Tuna; Akçay, Ergun; Çil, Beste; Uçar, Burak Mehmet; Daşkın, Ali

2017-01-01

The aim of the study is to evaluate the effectiveness of thermographic monitoring, using the temperature changes of perianal and perivulvar areas for the determination of estrus in Anatolian Shepherd bitches. Fifteen bitches were used in the study. Blood and vaginal smear samples were collected and thermographic monitoring of perianal and perivulvar areas were carried out starting from proestrus to early diestrus. Also, external signs of estrus were investigated. Smear samples were evaluated by light microscopy after Diff-Quik staining method and superficial and keratinized superficial cells were determined as percentage (S + KS%). Progesterone and luteinizing hormone measurements were done by radioimmunoassay. The difference in temperature between perianal and perivulvar areas was evaluated through thermographic images by FLIR ResearchIR Software. According to the results obtained from the study, differences between progesterone and S + KS% were statistically significant ( P   0,05). Serum luteinizing hormone levels did not sign any difference ( P  > 0,05). As a result, thermographic monitoring alone is not enough for estrus detection in Anatolian Shepherd bitches. However, it can be used to assist the actual estrus detection technique in terms of providing some foreknowledge by evaluating the differences in temperature.

Research on mutant barley population under biotic and abiotic stress condition

International Nuclear Information System (INIS)

Peskircioglu, H.; Tuyluer, I.; Sagel, Z.; Kunter, B.; Kantoglu, Y.

2009-01-01

Barley is one of the most important cereal with 8,5 million tons production, 3,5 million hectares of sowing area in Turkey which is also one of the gene centres of barley. Barley is grown in every regions of Turkey where climatic conditions are available for the crop. But barley is the predominant crop in the driest land areas throughout the Anatolian plateau. Winters on that plateau are especially severe. Summers are hot and dry with temperatures above 30 degree C. Annual precipitation averages about 300 to 400 millimeters and rains mainly in winter. Because of all of these prerequisite conditions, winter barley dominates in Turkey, which indirectly refers to water economy. According to the above mentioned reasons the objectives of this investigation were: 1) Improvement of drought resistance, loading resistance and high yielding barley varieties by mutation breeding in Central Anatolian Region. 2) Determination and selection of abiotic stress such as salt resistance In our barley mutation breeding programme under Central Anatolian conditions well adapted Tokak 157/37 variety has been used. We applied 250 Gy-300 Gy gamma ray doses . Selection began at M 2 generation. Agronomical characters including earliness, straw length, lodging resistance and disease resistance are monitored in the field and greenhouse. Mutant lines have been tested for salt resistance in the hydrophonic culture which contains 180 mMol and 220 mMol NaCl concentrations. Preliminary yield trial and advanced yield trial are started after M 4 generations. In M 6 generation, we had some desirable lines those are 25-30 days earlier than its parents, so these lines escape from drought period. Some lines that have grown in the hydrophonic cultures, contains 180mMol NaCl still surviving.

High School Science Teachers' Views on Science Process Skills

Science.gov (United States)

Gultepe, Nejla

2016-01-01

The current research is a descriptive study in which a survey model was used. The research involved chemistry (n = 26), physics (n = 27), and biology (n = 29) teachers working in Science High Schools and Anatolian High Schools in Turkey. An inventory that consisted of seven questions was designed to ascertain what teachers' think about the…

Motor fuel prices in Turkey

International Nuclear Information System (INIS)

Erdogdu, Erkan

2014-01-01

The world's most expensive motor fuel (gasoline, diesel and LPG) is sold most likely in the Republic of Turkey. This paper investigates the key issues related to the motor fuel prices in Turkey. First of all, the paper analyses the main reason behind high prices, namely motor fuel taxes in Turkey. Then, it estimates the elasticity of motor fuel demand in Turkey using an econometric analysis. The findings indicate that motor fuel demand in Turkey is quite inelastic and, therefore, not responsive to price increases caused by an increase in either pre-tax prices or taxes. Therefore, fuel market in Turkey is open to opportunistic behavior by firms (through excessive profits) and the government (through excessive taxes). Besides, the paper focuses on the impact of high motor fuel prices on road transport associated activities, including the pattern of passenger transportation, motorization rate, fuel use, total kilometers traveled and CO 2 emissions from road transportation. The impact of motor fuel prices on income distribution in Turkey and Turkish public opinion about high motor fuel prices are also among the subjects investigated in the course of the study. - Highlights: • The key issues (e.g. taxes) related to motor fuel prices in Turkey are explored. • Their impact on transport activities and income distribution is also investigated. • An econometric analysis is performed to estimate motor fuel demand in Turkey. • Motor fuel demand in Turkey is found to be quite inelastic. • Turkish fuel market is open to opportunistic behavior by firms and the government

Microstructures of the Kirsehir Complex, Central Turkey

Science.gov (United States)

ISIK, V.; Caglayan, A.; Uysal, T.; Bolhar, R.

2011-12-01

Turkey is positioned on the boundary between the Eurasian and African/Arabian plates, providing an ideal natural laboratory for learning passive and active earth processes such as deformation, metamorphism, earthquakes and volcanism. Central Turkey historically has played an important role in evolution of the Alpine orogeny. The Kirsehir Complex is one of three Mesozoic-Early Tertiary metamorphic and plutonic mid-crustal basement units exposed in central Turkey. The most common lithology of the metamorphites are the banded gneisses, which are intercalated with layers of schists, amphibolites and quartzite, and marbles representing the structurally the highest metamorphites of the study area. The metamorphites are characterized by multiple folding episodes and overprinting faults (thrust, normal and strike-slip). These metamorphites reached peak metamorphic conditions of upper amphibolite facies, as indicated by local presence of clinopyroxene, sillimanite, hornblende, andalusite and garnet. Later, retrograde greenschist facies conditions were attained characterized by the alteration of feldspar and mafic minerals to muscovite and chlorite/actinolite, respectively. The microstructures of selected minerals can be used to bracket the metamorphic grade during which microstructure formed. Quartz displays undulose extinction, deformation bands, subgrains and deformation lamellae, and recrystallisation. The presence of lobate grain boundaries of quartz indicates that GBM recrystallisation occurred. Undulose extinction and recrystallisation are common in micas. Recrystallisation, core-mantle structures in feldspar, myrmekites in K-feldspars within the gneisses suggest that deformation occurred within the amphibolite facies. Garnet occurs as slightly elliptical porphroclats. Sillimanite is present as fibrolite growing near biotite and microboudinaged. Andalusite porphyroblast/porphroclats are elongate and microboudinaged. Kinematic indicators (asymmetric mantled grains, S

Demographic Factors Affecting Internet Using Purposes of High School Students

Science.gov (United States)

Kilic, Abdullah Faruk; Güzeller, Cem Oktay

2017-01-01

This study aimed at determining the impact of demographic factors on the Internet usage purposes of high school students. The population of the study consisted of students between 9th and 12th grades from the Anatolian high schools, science high schools, social sciences high schools, sports high schools and fine arts high schools in Turkey. The…

The Effect of Group Work on Misconceptions of 9th Grade Students about Newton's Laws

Science.gov (United States)

Ergin, Serap

2016-01-01

In this study, the effect of group work and traditional method on 9th grade students' misconceptions about Newton Laws was investigated. The study was conducted in three classes in an Anatolian Vocational High School in Ankara/Turkey in the second term of the 2014-2015 academic year. Two of these classes were chosen as the experimental group and…

Fault morphology of the lyo Fault, the Median Tectonic Line Active Fault System

OpenAIRE

後藤, 秀昭

1996-01-01

In this paper, we investigated the various fault features of the lyo fault and depicted fault lines or detailed topographic map. The results of this paper are summarized as follows; 1) Distinct evidence of the right-lateral movement is continuously discernible along the lyo fault. 2) Active fault traces are remarkably linear suggesting that the angle of fault plane is high. 3) The lyo fault can be divided into four segments by jogs between left-stepping traces. 4) The mean slip rate is 1.3 ～ ...

Assessment of Tsunami-related Geohazard Assessment for Coasts of Hersek Peninsula and Gulf of İzmit

Directory of Open Access Journals (Sweden)

Cem Gazioğlu

2017-05-01

Full Text Available Tsunamis are one of the most dreadful natural disasters; they could cause abysmal damage to all kind of lives in the hinterland within instantly. It is a major right-lateral moving fault that runs along the tectonic boundary between the Eurasian Plate to the north and the Anatolian Plate to the south. The western segment of the North Anatolian Fault splits into three main branches. The northern one of NAF is generally subdivided in several subsegments that have been the source of frequent large historical earthquakes. The Sea of Marmara coasts is located on the western extension of the NAFZ which is one of the most important active faults with strike-slip characteristics, which are not likely to generate tsunami. However, in the light of tsunami catalogs based on historical documents, it is possible to say that Sea of Marmara has tsunamigenic potential. The İstanbul shorelines, Gemlik Bay, Kapıdağ N-NE shores, Gelibolu, Hersek Peinsula and Gulf of İzmit are one of the most significant geohazards in Sea of Marmara due to the tsunami effect.

The use of infrared thermography to detect the stages of estrus cycle and ovulation time in anatolian shepherd dogs

Directory of Open Access Journals (Sweden)

Kemal Tuna Olğaç

2017-10-01

Full Text Available Abstract Background The aim of the study is to evaluate the effectiveness of thermographic monitoring, using the temperature changes of perianal and perivulvar areas for the determination of estrus in Anatolian Shepherd bitches. Fifteen bitches were used in the study. Blood and vaginal smear samples were collected and thermographic monitoring of perianal and perivulvar areas were carried out starting from proestrus to early diestrus. Also, external signs of estrus were investigated. Smear samples were evaluated by light microscopy after Diff-Quik staining method and superficial and keratinized superficial cells were determined as percentage (S + KS%. Progesterone and luteinizing hormone measurements were done by radioimmunoassay. The difference in temperature between perianal and perivulvar areas was evaluated through thermographic images by FLIR ResearchIR Software. Results According to the results obtained from the study, differences between progesterone and S + KS% were statistically significant (P  0,05. Serum luteinizing hormone levels did not sign any difference (P > 0,05. Conclusions As a result, thermographic monitoring alone is not enough for estrus detection in Anatolian Shepherd bitches. However, it can be used to assist the actual estrus detection technique in terms of providing some foreknowledge by evaluating the differences in temperature.

Energy in Turkey

International Nuclear Information System (INIS)

Bumin, S.

2005-01-01

Because of its limited energy resources, Turkey is heavily dependent on imported oil and gas. 73 percent of the world's proven oil reserves and 72 percent of the world's proven gas reserves are located in the surrounding regions of Turkey: Middle East, Caspian Region and Russia. This makes Turkey a crucial bridge between energy rich regions and Europe. There are major oil and gas pipelines going through Turkey and additional pipelines are being constructed or are being planned. There is some production of lignite which is used in power plants and industry. Turkey's natural energy resources are quite diversified; with quite abundant coal reserves. Energy forecasts show that primary energy demand would be 117 million TOE in 2005 and 156 million TOE in 2010. Oil has the biggest share (39 percent) in total primary energy consumption, while natural gas has a share of 21 percent and increasing due to the recent diversification efforts of energy resources. Turkey has about 1percent of the total world hydroelectric potential and a considerable potential for electricity generation from wind. As of early 2004, Turkey had electric power generating capacity of around 32,000 megawatts (MW), and was building 13,000 MW more. Since adoption of Electricity Market Law in February 2001, there were significant changes towards liberalisation of power generation market and distribution in the country. Privatization of generation assets is envisaged to start in 2006. The Electricity Market Law set the stage for new supporting laws and regulations as well as new organization of the market: the Energy Market Regulation Agency (EMRA), that oversees the power, natural gas markets, oil markets and liquefied petroleum gases market, including setting tariffs, issuing licenses, and assuring competition; the Energy Market Regulatory Board, which runs the EMRA; the Energy Market Licensing Regulation and the Electricity Market Tariffs Regulation; 4-phase approach towards electric energy market

Results from the latest SN-4 multi-parametric benthic observatory experiment (MARsite EU project) in the Gulf of Izmit, Turkey: oceanographic, chemical and seismic monitoring

Science.gov (United States)

Embriaco, Davide; Marinaro, Giuditta; Frugoni, Francesco; Giovanetti, Gabriele; Monna, Stephen; Etiope, Giuseppe; Gasperini, Luca; Çağatay, Namık; Favali, Paolo

2015-04-01

An autonomous and long-term multiparametric benthic observatory (SN-4) was designed to study gas seepage and seismic energy release along the submerged segment of the North Anatolian Fault (NAF). Episodic gas seepage occurs at the seafloor in the Gulf of Izmit (Sea of Marmara, NW Turkey) along this submerged segment of the NAF, which ruptured during the 1999 Mw7.4 Izmit earthquake. The SN-4 observatory already operated in the Gulf of Izmit at the western end of the 1999 Izmit earthquake rupture for about one-year at 166 m water depth during the 2009-2010 experiment (EGU2014-13412-1, EGU General Assembly 2014). SN-4 was re-deployed in the same site for a new long term mission (September 2013 - April 2014) in the framework of MARsite (New Directions in Seismic Hazard assessment through Focused Earth Observation in the Marmara Supersite, http://marsite.eu/ ) EC project, which aims at evaluating seismic risk and managing of long-term monitoring activities in the Marmara Sea. A main scientific objective of the SN-4 experiment is to investigate the possible correlations between seafloor methane seepage and release of seismic energy. We used the same site of the 2009-2010 campaign to verify both the occurrence of previously observed phenomena and the reliability of results obtained in the previous experiment (Embriaco et al., 2014, doi:10.1093/gji/ggt436). In particular, we are interested in the detection of gas release at the seafloor, in the role played by oceanographic phenomena in this detection, and in the association of gas and seismic energy release. The scientific payload included, among other instruments, a three-component broad-band seismometer, and gas and oceanographic sensors. We present a technical description of the observatory, including the data acquisition and control system, results from the preliminary analysis of this new multidisciplinary data set, and a comparison with the previous experiment.

An Assessment of the Seismicity of the Bursa Region from a Temporary Seismic Network

Science.gov (United States)

Gok, Elcin; Polat, Orhan

2012-04-01

A temporary earthquake station network of 11 seismological recorders was operated in the Bursa region, south of the Marmara Sea in the northwest of Turkey, which is located at the southern strand of the North Anatolian Fault Zone (NAFZ). We located 384 earthquakes out of a total of 582 recorded events that span the study area between 28.50-30.00°E longitudes and 39.75-40.75°N latitudes. The depth of most events was found to be less than 29 km, and the magnitude interval ranges were between 0.3 ≤ ML ≤ 5.4, with RMS less than or equal to 0.2. Seismic activities were concentrated southeast of Uludag Mountain (UM), in the Kestel-Igdir area and along the Gemlik Fault (GF). In the study, we computed 10 focal mechanisms from temporary and permanents networks. The predominant feature of the computed focal mechanisms is the relatively widespread near horizontal northwest-southeast (NW-SE) T-axis orientation. These fault planes have been used to obtain the orientation and shape factor (R, magnitude stress ratio) of the principal stress tensors (σ1, σ2, σ3). The resulting stress tensors reveal σ1 closer to the vertical (oriented NE-SW) and σ2, σ3 horizontal with R = 0.5. These results confirm that Bursa and its vicinity could be defined by an extensional regime showing a primarily normal to oblique-slip motion character. It differs from what might be expected from the stress tensor inversion for the NAFZ. Different fault patterns related to structural heterogeneity from the north to the south in the study area caused a change in the stress regime from strike-slip to normal faulting.

The use of infrared thermography to detect the stages of estrus cycle and ovulation time in anatolian shepherd dogs

OpenAIRE

Kemal Tuna Olğaç; Ergun Akçay; Beste Çil; Burak Mehmet Uçar; Ali Daşkın

2017-01-01

Abstract Background The aim of the study is to evaluate the effectiveness of thermographic monitoring, using the temperature changes of perianal and perivulvar areas for the determination of estrus in Anatolian Shepherd bitches. Fifteen bitches were used in the study. Blood and vaginal smear samples were collected and thermographic monitoring of perianal and perivulvar areas were carried out starting from proestrus to early diestrus. Also, external signs of estrus were investigated. Smear sam...

Semi-Arid Plantation by Anatolian Black Pine and Its Effects on Soil Erosion and Soil Properties

Directory of Open Access Journals (Sweden)

Sezgin Hacisalihoglu

2018-04-01

Full Text Available In this study, the effects of Anatolian Black pine [(Pinus nigra Arn. subsp. pallasiana (Lamb. Holmboe] plantation on hydro-physical soil properties and soil loss were investigated. This study was carried out on the afforestation field of Anatolian Black Pine in the Gölbaşı district of Ankara province, which is included in the arid and semi-arid regions. Totally 48 soil sample in two soil depth level (0-20cm, 20-50cm were collected from forest (36 soil sample and barren (control area (12 soil sample. Hydro-physically important soil properties were analysed [Sand (%, Silt (%, Clay (%, Organic Matter (%, pH, Field Capacity (%, Wilting Point (%, Saturation (%, Available Water Holding Capacity (cm/cm Saturated Hydraulic Conductivity (cm/hr, Bulk Density (gr/cm3]. And soil loss in a unit area by using ABAG (Allgemeine Boden Abtrags Gleichung model was estimated. Soil properties and soil loss amount relations among the land use group were determined. Topsoil (0-20cm and subsoil (20-50cm properties except subsoil organic matter were significantly affected by land use group. Finally, Significant changes were found for annual soil loss amounts in a unit area. Avarage annual soil loss in planted area was found approximately 5.5 times less than barren area at 0-50 cm soil depth. Vegetation factor (C which is one of the most important components of the soil loss equation, has been significantly affected by afforestation in a short period of 40 years and thus it was a variable to reduce to soil loss.

Verbascum lindae (Scrophulariaceae), a new species from SW Anatolia, Turkey

DEFF Research Database (Denmark)

Parolly, Gerald; Tan, Kit

2007-01-01

Verbascum lindae, a taxonomically isolated limestone chasmophyte from the vilayet of Isparta in SW Anatolia is described as a species new to science and illustrated. Its affinities with other Anatolian Verbascum species, which have either a chasmophytic habit or at least a woody base, are discussed....

Fault tolerant control based on active fault diagnosis

DEFF Research Database (Denmark)

Niemann, Hans Henrik

2005-01-01

An active fault diagnosis (AFD) method will be considered in this paper in connection with a Fault Tolerant Control (FTC) architecture based on the YJBK parameterization of all stabilizing controllers. The architecture consists of a fault diagnosis (FD) part and a controller reconfiguration (CR......) part. The FTC architecture can be applied for additive faults, parametric faults, and for system structural changes. Only parametric faults will be considered in this paper. The main focus in this paper is on the use of the new approach of active fault diagnosis in connection with FTC. The active fault...... diagnosis approach is based on including an auxiliary input in the system. A fault signature matrix is introduced in connection with AFD, given as the transfer function from the auxiliary input to the residual output. This can be considered as a generalization of the passive fault diagnosis case, where...

Energy Diplomacy of Turkey

Directory of Open Access Journals (Sweden)

Volkan Ozdemir

2016-01-01

Full Text Available The article deals with current issues of energy diplomacy of Turkey. The authors describe the main positive and negative results of Turkey's foreign energy policy in terms of the implementation of major energy projects. Geopolitical processes in the world, the conflict of interests of various countries in the political arena are important factors that affect the crude oil and natural gas pipeline projects. Particular attention is paid to the problems and prospects of cooperation between the Turkish Republic and the Russian Federation in the fuel and energy complex. The authors describe the interaction betweeen Russia and Turkey in the energy sector, including geo-economic interests of the countries in the Russian-Turkish gas dialogue. Turkey made efforts to position as an alternative gas supply route, taking advantage of concern about increasing Europe's dependence on Russian exports. Last years Turkey has set itself the important task - to turn from transit country into a regional gas hub. Ukrainian crisis increased the geostrategic importance of the Black Sea region to Russia, as well as strengthened the ambition of the Turkish side. The authors also highlight the prospects of the natural gas pipeline project from Russia via the Black Sea to Turkey and to the Turkish-Greek border, which named "Turkish stream". This project was frozen in terms of military and political processes at the end of 2015 in Syria.

Characterization of Clostridium perfringens isolates from healthy turkeys and from turkeys with necrotic enteritis

DEFF Research Database (Denmark)

Lyhs, Ulrike; Perko-Mäkelä, P.; Kallio, H.

2013-01-01

from 1998 to 2012. Furthermore, C. perfringens isolates from healthy and diseased turkeys were characterized and their genetic diversity was investigated using pulsed-field gel electrophoresis (PFGE). Isolates (n = 212) from birds with necrotic gut lesions and from healthy flocks of 30 commercial...... turkey farms were characterized for the presence of cpa, cpb, iA, etx, cpb2, and cpe and netB genes. A total of 93 C. perfringens isolates, including 55 from birds with necrotic gut lesions and 38 from healthy birds from 13 different farms, were analyzed with PFGE. All contract turkey farmers (n = 48......) of a turkey company that produces 99% of domestic turkey meat in Finland were interviewed about background information, management at the farm, and stress factors related to NE outbreaks. Pulsed-field gel electrophoresis analysis with SmaI restriction enzyme resulted in 30 PFGE patterns among the 92 C...

Insights into the 3D architecture of an active caldera ring-fault at Tendürek volcano through modeling of geodetic data

KAUST Repository

Vasyura-Bathke, Hannes

2015-04-28

The three-dimensional assessment of ring-fault geometries and kinematics at active caldera volcanoes is typically limited by sparse field, geodetic or seismological data, or by only partial ring-fault rupture or slip. Here we use a novel combination of spatially dense InSAR time-series data, numerical models and sand-box experiments to determine the three-dimensional geometry and kinematics of a sub-surface ring-fault at Tendürek volcano in Turkey. The InSAR data reveal that the area within the ring-fault not only subsides, but also shows substantial westward-directed lateral movement. The models and experiments explain this as a consequence of a ‘sliding-trapdoor’ ring-fault architecture that is mostly composed of outward-inclined reverse segments, most markedly so on the volcano\\'s western flanks but includes inward-inclined normal segments on its eastern flanks. Furthermore, the model ring-fault exhibits dextral and sinistral strike-slip components that are roughly bilaterally distributed onto its northern and southern segments, respectively. Our more complex numerical model describes the deformation at Tendürek better than an analytical solution for a single rectangular dislocation in a half-space. Comparison to ring-faults defined at Glen Coe, Fernandina and Bárðarbunga calderas suggests that ‘sliding-trapdoor’ ring-fault geometries may be common in nature and should therefore be considered in geological and geophysical interpretations of ring-faults at different scales worldwide.

Fault detection and isolation in systems with parametric faults

DEFF Research Database (Denmark)

Stoustrup, Jakob; Niemann, Hans Henrik

1999-01-01

The problem of fault detection and isolation of parametric faults is considered in this paper. A fault detection problem based on parametric faults are associated with internal parameter variations in the dynamical system. A fault detection and isolation method for parametric faults is formulated...

Comparison of Cenozoic Faulting at the Savannah River Site to Fault Characteristics of the Atlantic Coast Fault Province: Implications for Fault Capability

International Nuclear Information System (INIS)

Cumbest, R.J.

2000-01-01

This study compares the faulting observed on the Savannah River Site and vicinity with the faults of the Atlantic Coastal Fault Province and concludes that both sets of faults exhibit the same general characteristics and are closely associated. Based on the strength of this association it is concluded that the faults observed on the Savannah River Site and vicinity are in fact part of the Atlantic Coastal Fault Province. Inclusion in this group means that the historical precedent established by decades of previous studies on the seismic hazard potential for the Atlantic Coastal Fault Province is relevant to faulting at the Savannah River Site. That is, since these faults are genetically related the conclusion of ''not capable'' reached in past evaluations applies.In addition, this study establishes a set of criteria by which individual faults may be evaluated in order to assess their inclusion in the Atlantic Coast Fault Province and the related association of the ''not capable'' conclusion

Turkey: A Geostrategic Analysis

National Research Council Canada - National Science Library

Fanale, Rosalie A

2001-01-01

...] America"s primary national security interest in Turkey is regional stability. U.S. strategy aims for Turkey to be a strong regional player, able to act in support of U.S. interests in a troubled region.

How Turkey Meets MPOWER Criteria?

Directory of Open Access Journals (Sweden)

Nazmi Bilir

2013-02-01

Full Text Available In 2003 World Health Assembly adopted an international treaty on tobacco control; FCTC, Framework Convention on Tobacco Control. Five year later World Health Organization (WHO declared the six effective approach for tobacco control, under the name of MPOWER. In the following years, WHO evaluated the level of implementation of MPOWER criteria in the countries. In this article, how Turkey implemented these six criteria will be discussed. Monitor tobacco use and prevention policies: Monitoring of tobacco use prevalence has been successfully monitored in Turkey through Global Adult Tobacco Survey, Global Youth Tobacco Survey and Health Professionals Tobacco Use Survey. Nevertheless, monitoring of tobacco industry activities was not successfully implemented. Protect people from tobacco smoke: Smoking was banned in most of the indoor public places in Turkey since 1996, and Turkey became a complete smoke-free country by the exposion of smoke-free places including the hospitality workplaces in 2008. Offer help to quit tobacco use: Although smoking cessation services has been a bit late in Turkey, availability of smoking cessation drugs and the establishment of free quitline services made Turkey successful in this regard. Warn about the dangers of tobacco: Since 1996, all TV channels have a duty of broadcasting programs on harms of tobacco use, not less than 90 minutes in a month and it has been implemented successfully. Additionally written messages indicating harms of tobacco has been printed on the packs since 1988 and pictures was added in 2010. But since the average surface area covered by the messages in less than 50% of the total surface of the pack, Turkey was not regarded as to meet the requirement. Enforce bans on tobacco advertising, promotion and sponsorship: All kinds of tobacco advertisement and promotion was banned by the Law in 1996. But the tobacco products was not in closed boxes at the sales points. Turkey was not found as successful

Morphologic Features of Kapıdağ Peninsula and its Coasts (NW-Turkey using by Remote Sensing and DTM

Directory of Open Access Journals (Sweden)

Cem Gazioğlu

2014-11-01

Full Text Available Although it is an inland sea, the Sea of Marmara and its surroundings have rather complex morphology due to the active tectonics of the North Anatolian Fault (NAF zone in this region. The Kapıdağ Peninsula which is located at its southern coasts also represents a complex morphology. Macro morphologic units of Kapıdağ Peninsula are N-S trending deep valley systems, mountain areas and Belkıs isthmus. The most coastal area of peninsula has terraces, coastal plains and alluvial valley floors. These unique morphologic features can explain some parameters of active tectonics of the Sea of Marmara region. In order to investigate these geomorphologic features of the Kapıdağ peninsula in detail, some land observations, satellite data, Digital Terrain Models (DTMs which have been evaluated from topographic maps with a vertical precision of ±3m and cell size of 8m, Geographic Information Systems (GIS, traditional methods and some integrated techniques such as image processing were used.

Portable and micro x-ray fluorescence investigations of the wall paintings belonging to different periods of anatolian history

International Nuclear Information System (INIS)

Zararsiz, A.; Ozen, L.; Kalayci, Y.

2014-01-01

Full text: In this study portable x-ray fluorescence spectrometer and micro x-ray fluorescence spectrometer were used for investigating the pigments on the Chatalhoyuk wall paintings from the neolithic period which are located in Museum of Anatolian Civilizations. Totally 15 artifacts were investigated in this study and the elemental compositions of the pigments were identified on this paintings. The communities which have lived in different periods of time have revealed different cultures during the 12 000 years old cultural heritage in our country

[Cutaneous leishmaniasis cases in Nizip, Turkey after the Syrian civil war].

Science.gov (United States)

Salman, Ismail Serkan; Vural, Ahmet; Unver, Ahmet; Saçar, Suzan

2014-01-01

Cutaneous leishmaniasis (CL), seen endemically in many countries, is a widespread protozoon disease all around the world. The neighboring countries of Turkey namely Iran, Iraq and Syria are highly endemic regions for CL, and more than 98% of the cases in Turkey are reported from South and Southeastern Anatolian regions. The aim of this study was to detect the prevalence of CL in Nizip, a district of Gaziantep province of southeastern Turkey, for three and half year period and to call attention to the dramatic increase of CL cases observed after the Syrian civil war. A total of 416 samples obtained from clinically suspected CL patients (of them 341 were Syrian refugees) who were admitted to Nizip State Hospital between January 1st 2010 and March 19th 2013 were included in the study. Lesion samples were collected according to the notice issued by Turkish Ministry of Health and Giemsa-stained smears were examined under the microscope (x1000). Samples from 77 patients (18.5%) yielded positive results with the observation of Leishmania amastigote forms. Fourty-seven (61%) of patients were female and 30 (39%) were male. Of the positive patients 52 (67.5%) belonged to 0-19 age group, 13 (16.9%) 20-39 and 12 (15.6%) 40-60 age groups. In the evaluation of the lesion characteristics, 33 (43%) patients had single and 44 (57%) had multiple lesions with a distribution mainly on face, arm and lower extremities, in a decreasing order. The period of time for the development of the lesions varied from 1.5 month to one year with the mean value of 3.4 months. There was no statistically significant relationship between the age and gender of patients, and the characteristics (quantity, distribution and time of occurence) of lesions (p> 0.05). The number of domestic and Syrian CL cases detected in Nizip in the years of 2010, 2011, 2012 and 2013 (the first three months) were as follows; 1 and 0, 2 and 0, 7 and 0, 5 and 62, respectively. So a total of 62 (80.5%) and 15 (19.5%) of CL

Clarifying the interplate main tectonic elements of Western Anatolia, Turkey by using GNSS velocities and Bouguer gravity anomalies

Science.gov (United States)

Çırmık, Ayça; Pamukçu, Oya

2017-10-01

In this study, the GNSS and gravity data were processed and compared together for examining the continental structures of the Western Anatolia region which has very complicated tectonism. The GNSS data of three national projects were processed and GNSS velocities were found as approximately 25 mm per year towards southwest with respect to the Eurasia fixed frame. In order to investigate the interplate motions of the region, the Anatolian and Aegean block solutions were calculated and the differences in directions and amplitudes of velocities were observed particularly in the Anatolian block solution. Due to the Anatolian block solutions, the study area was grouped into three regions and compared with the tectonic structures as the first time for Western Anatolia by this study. Additionally, W-E and N-S relative GNSS solutions were obtained for observing the possible tectonic borders of the study area. Besides, 2nd order horizontal derivative and low-pass filter methods were applied to Bouguer gravity anomalies and the results of the gravity applications and the changes on crustal-mantle interface were compared with the GNSS horizontal velocities.

From fault classification to fault tolerance for multi-agent systems

CERN Document Server

Potiron, Katia; Taillibert, Patrick

2013-01-01

Faults are a concern for Multi-Agent Systems (MAS) designers, especially if the MAS are built for industrial or military use because there must be some guarantee of dependability. Some fault classification exists for classical systems, and is used to define faults. When dependability is at stake, such fault classification may be used from the beginning of the system's conception to define fault classes and specify which types of faults are expected. Thus, one may want to use fault classification for MAS; however, From Fault Classification to Fault Tolerance for Multi-Agent Systems argues that

Summary: beyond fault trees to fault graphs

International Nuclear Information System (INIS)

Alesso, H.P.; Prassinos, P.; Smith, C.F.

1984-09-01

Fault Graphs are the natural evolutionary step over a traditional fault-tree model. A Fault Graph is a failure-oriented directed graph with logic connectives that allows cycles. We intentionally construct the Fault Graph to trace the piping and instrumentation drawing (P and ID) of the system, but with logical AND and OR conditions added. Then we evaluate the Fault Graph with computer codes based on graph-theoretic methods. Fault Graph computer codes are based on graph concepts, such as path set (a set of nodes traveled on a path from one node to another) and reachability (the complete set of all possible paths between any two nodes). These codes are used to find the cut-sets (any minimal set of component failures that will fail the system) and to evaluate the system reliability

Fault-related clay authigenesis along the Moab Fault: Implications for calculations of fault rock composition and mechanical and hydrologic fault zone properties

Science.gov (United States)

Solum, J.G.; Davatzes, N.C.; Lockner, D.A.

2010-01-01

The presence of clays in fault rocks influences both the mechanical and hydrologic properties of clay-bearing faults, and therefore it is critical to understand the origin of clays in fault rocks and their distributions is of great importance for defining fundamental properties of faults in the shallow crust. Field mapping shows that layers of clay gouge and shale smear are common along the Moab Fault, from exposures with throws ranging from 10 to ???1000 m. Elemental analyses of four locations along the Moab Fault show that fault rocks are enriched in clays at R191 and Bartlett Wash, but that this clay enrichment occurred at different times and was associated with different fluids. Fault rocks at Corral and Courthouse Canyons show little difference in elemental composition from adjacent protolith, suggesting that formation of fault rocks at those locations is governed by mechanical processes. Friction tests show that these authigenic clays result in fault zone weakening, and potentially influence the style of failure along the fault (seismogenic vs. aseismic) and potentially influence the amount of fluid loss associated with coseismic dilation. Scanning electron microscopy shows that authigenesis promotes that continuity of slip surfaces, thereby enhancing seal capacity. The occurrence of the authigenesis, and its influence on the sealing properties of faults, highlights the importance of determining the processes that control this phenomenon. ?? 2010 Elsevier Ltd.

Kurdistan: Impact on United States Foreign Policy for the Middle East

Science.gov (United States)

2011-04-06

The land consists of a combination of aggressive, steep mountains and valleys transitioning into the Anatolian plain in Turkey, the Mesopotamian plain...tribes and the precarious mountains became home to their large villages and cities as the population grew over time. The rugged conditions of the ...Iran’s multi- cultural society. In Iraq, the Kurds are one of the three major groups (along with Sunni and

Sustainability Organic Agriculture and Livestock Production with Respect to European Union in Eastern Anatolia and East Black Sea Regions

Directory of Open Access Journals (Sweden)

Vecihi Aksakal

2016-11-01

Full Text Available The majority of farm households in Turkey and especially the Eastern Anatolia are still based on low-input semi subsistence agriculture and livestock production. Despite a slow decline in recent years, agriculture and livestock production remains a major employer in Turkey and it is a significant contributor to the country’s gross domestic product, GDP. Whist Turkey is one of the EU candidate countries, is self sufficient in food production and Turkish agriculture is poorly structured inefficient, with farming in the Eastern Anatolia being mainly subsistence farming. Yet, these traditional rural structures combined with poor access to low level of education and low level of off-farm unemployment problem makes the situation more complicated and unsustainable. The best way to promote sustainability, better and higher production of Eastern Anatolian and rural Turkey is to invest in the local people, villages through improved, continuing and effective agricultural and livestock programs in particular. Investment in human capital especially in the rural areas leads to more employment opportunities through entrepreneurship and innovation in organic agriculture and livestock production. A holistic approach to developing and improving supply chains could unlock the potential for sophisticated, state-of-the-art organic agriculture and livestock producers and businesses in the region to become EU and global players. Eastern Anatolian livestock producers and the farmers have the ambitions to take part in future progress because the region is naturally organic not by design but default. It is for sure that present potential of the region has not been fully determined and utilized. EU has greatly benefited from previous enlargements economically, politically and socially. When European Union (EU and Turkish Government relations considered and accession of Turkey to EU would be the logical consequence of the previous accessions. The screening on chapter 11

The Rise of Political Islam in Turkey

Science.gov (United States)

2008-01-01

and 90 in France , selected and pre- pared by the Diyanet in conjunction with German and French authori- ties. (The preparation includes instruction...authors that if Gülen were to return, secularists would liken it to the return of the Ayatollah Khomeini from France in 1979. To prevent problems for the...including Denizli, Gaziantep, and Kahramanmaraş. The economic upswing created a new middle class— the so-called “Anatolian bourgeoisie ”—with strong roots

Wind energy and Turkey.

Science.gov (United States)

Coskun, Aynur Aydin; Türker, Yavuz Özhan

2012-03-01

The global energy requirement for sustaining economic activities, meeting social needs and social development is increasing daily. Environmentally friendly, renewable energy resources are an alternative to the primary non-renewable energy resources, which devastate ecosystems in order to meet increasing demand. Among renewable energy sources such as hydropower, biopower, geothermal power and solar power, wind power offers distinct advantages to Turkey. There is an increasing tendency toward wind globally and the European Union adjusted its legal regulations in this regard. As a potential EU Member state, Turkey is going through a similar process. The number of institutional and legal regulations concerning wind power has increased in recent years; technical infrastructure studies were completed, and some important steps were taken in this regard. This study examines the way in which Turkey has developed support for wind power, presents a SWOT analysis of the wind power sector in Turkey and a projection was made for the concrete success expected to be accomplished in the future.

Distance Education in Turkey

Directory of Open Access Journals (Sweden)

Dr. Nursel Selver RUZGAR,

2004-04-01

Full Text Available Distance Education in Turkey Assistant Professor Dr. Nursel Selver RUZGAR Technical Education Faculty Marmara University, TURKEY ABSTRACT Many countries of the world are using distance education with various ways, by internet, by post and by TV. In this work, development of distance education in Turkey has been presented from the beginning. After discussing types and applications for different levels of distance education in Turkey, the distance education was given in the cultural aspect of the view. Then, in order to create the tendencies and thoughts of graduates of Higher Education Institutions and Distance Education Institutions about being competitors in job markets, sufficiency of education level, advantages for education system, continuing education in different Institutions, a face-to-face survey was applied to 1284 graduates, 958 from Higher Education Institutions and 326 from Distance Education Institutions. The results were evaluated and discussed. In the last part of this work, suggestions to become widespread and improve the distance education in the country were made.

British American Tobacco's failure in Turkey.

Science.gov (United States)

Lawrence, S

2009-02-01

Transnational tobacco companies (TTCs) considered Turkey an important, potential investment market because of its high consumption rates and domestic commitment to tobacco. This paper outlines how British American Tobacco (BAT) attempted to establish a joint venture with the government monopoly TEKEL, while waiting for privatisation and a private tender. Analysis of tobacco industry documents from the Guildford Depository and online tobacco document sources. BAT failed to establish a market share in Turkey until 2000 despite repeated attempts to form a joint venture with Turkey's tobacco monopoly, TEKEL, once the market liberalised in the mid 1980s. BAT's failure in the Turkish market was due to a misguided investment strategy focused solely on acquiring TEKEL and is contrasted with Philip Morris success in Turkey despite both TTCs working within Turkey's unstable and corrupt investing climate.

Practical application of food irradiation in Turkey

International Nuclear Information System (INIS)

Cetinkaya, N.; Erhan, I.C.

2002-01-01

Turkey is the world's leading producer and exporter of dried fruits (dried figs, raisins,and dried apricots etc.) and nuts (hazelnuts, wall nuts, pistachios, peanuts etc.) all of which have to be fumigated by methyl bromide a few times prior to export. Last fumigation is obligatory before shipment according to current quarantine treatment. Methyl Bromide (MeBr) fumigation is the most commonly used insect quarantine treatment for dried fruits and nuts in Turkey to protect from potential infestations. In accordance with the Montreal Protocol, Turkey as an Article 5(1) country will take actions to regulate and take measures to phase-out MeBr use. So, Turkey has to total phase-out in 2015 but according to Turkey MeBr Phase-out Action Plan prepared and published by The Ministry of Agriculture and Rural affairs in 2001, using MeBr should be reduced for stored commodities by 50 % by 2002 and phased-out totally by 2004. Irradiation technology is ready as an alternative to MeBr fumigation under the Action Plan of Turkey. Intensive research studies on food irradiation in Turkey have started in early 1970's and have still been continued. After careful and intensive works of all related authorities and specialists for a long period and with the help of ICGFI, the food irradiation regulation of Turkey was published in Official Newspaper on November 6, 1999. Having the Food Irradiation Regulation has supported to initiate commercialization study in Turkey in Co-operation with IAEA (TUR 5022). Feasibility study of a commercial food irradiation facility for the potential application of food irradiation in Turkey was prepared by IAEA experts Dr.M.Ahmed and Ir. J.P.Lacroix and together with TUR 5022 Research Team in April 2001 in Izmir, Turkey. Gamma-Pak Irradiation Facility in Cerkeskoy-Tekirdag got the commercial food irradiation licence and registration certificate in Feb. 2002. Practical application of food irradiation is getting more attraction in Turkey in parallel with other

Fault tolerant control for uncertain systems with parametric faults

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Poulsen, Niels Kjølstad

2006-01-01

A fault tolerant control (FTC) architecture based on active fault diagnosis (AFD) and the YJBK (Youla, Jarb, Bongiorno and Kucera)parameterization is applied in this paper. Based on the FTC architecture, fault tolerant control of uncertain systems with slowly varying parametric faults...... is investigated. Conditions are given for closed-loop stability in case of false alarms or missing fault detection/isolation....

Petroleum Gases Market in Turkey

International Nuclear Information System (INIS)

Bumin, S.; Ozyoruk, B.

2007-01-01

We are at the beginning of a new millennium. At this stage, we are observing economic and social liberalization efforts and regional alliance projects throughout the world. In this very same process, we are also experiencing a more holistic concept called globalization, which covers rapid and simultaneous dissemination and integration of capital, labor, information and technology, world-wide. This globalization opened a new era where national market economies and local companies went into competition in the international arena. In this era, it became a necessity for the non-liberal economies to catch up with the developments in the international markets and be open to economic and political changes. These developments have brought along many radical economic and social changes throughout the world. Policies adopted in Turkey, with respect to the energy reform process, display a general tendency towards putting in place a legal framework that will support the implementation of good governance principles, and providing conformity with the relevant legislative infrastructure of both OECD and EU countries. Turkey has only limited reserves of oil and natural gas, but substantial reserves of coal, particularly lignite. Energy demand has grown at 4-5 % per annum over the past three decades and will continue to grow rapidly, which will require enormous investments in 2000 and 2020, with the most significant increase being that of natural gas. Because of its limited energy resources, Turkey is heavily dependent on imported oil and gas. There are major oil and gas pipelines going through Turkey and additional pipelines are being constructed or are being planned. There is some production of lignite which is used in power plants and industry. 73 % of the world's proven oil reserves and 72 % of the world's proven gas reserves are located in the surrounding regions of Turkey: Middle East, Caspian Region and Russia. This makes Turkey a crucial bridge between energy rich regions

LAMPF first-fault identifier for fast transient faults

International Nuclear Information System (INIS)

Swanson, A.R.; Hill, R.E.

1979-01-01

The LAMPF accelerator is presently producing 800-MeV proton beams at 0.5 mA average current. Machine protection for such a high-intensity accelerator requires a fast shutdown mechanism, which can turn off the beam within a few microseconds of the occurrence of a machine fault. The resulting beam unloading transients cause the rf systems to exceed control loop tolerances and consequently generate multiple fault indications for identification by the control computer. The problem is to isolate the primary fault or cause of beam shutdown while disregarding as many as 50 secondary fault indications that occur as a result of beam shutdown. The LAMPF First-Fault Identifier (FFI) for fast transient faults is operational and has proven capable of first-fault identification. The FFI design utilized features of the Fast Protection System that were previously implemented for beam chopping and rf power conservation. No software changes were required

Why the 2002 Denali fault rupture propagated onto the Totschunda fault: implications for fault branching and seismic hazards

Science.gov (United States)

Schwartz, David P.; Haeussler, Peter J.; Seitz, Gordon G.; Dawson, Timothy E.

2012-01-01

The propagation of the rupture of the Mw7.9 Denali fault earthquake from the central Denali fault onto the Totschunda fault has provided a basis for dynamic models of fault branching in which the angle of the regional or local prestress relative to the orientation of the main fault and branch plays a principal role in determining which fault branch is taken. GeoEarthScope LiDAR and paleoseismic data allow us to map the structure of the Denali-Totschunda fault intersection and evaluate controls of fault branching from a geological perspective. LiDAR data reveal the Denali-Totschunda fault intersection is structurally simple with the two faults directly connected. At the branch point, 227.2 km east of the 2002 epicenter, the 2002 rupture diverges southeast to become the Totschunda fault. We use paleoseismic data to propose that differences in the accumulated strain on each fault segment, which express differences in the elapsed time since the most recent event, was one important control of the branching direction. We suggest that data on event history, slip rate, paleo offsets, fault geometry and structure, and connectivity, especially on high slip rate-short recurrence interval faults, can be used to assess the likelihood of branching and its direction. Analysis of the Denali-Totschunda fault intersection has implications for evaluating the potential for a rupture to propagate across other types of fault intersections and for characterizing sources of future large earthquakes.

Modelling of Earthquake History of the Knidos Fault Zone SW Turkey Using in-situ 36Cl Surface Exposure Dating by R

Science.gov (United States)

Sahin, S.; Yıldırım, C.; Sarıkaya, M. A.; Tuysuz, O.; Genç, S. C.; Aksoy, M. E.; Doksanaltı, M. E.; Benedetti, L.

2016-12-01

Cosmogenic surface exposure dating is based on the production of rare nuclides in exposed rocks, which interact with cosmic rays. Through modelling of measured 36Cl concentrations, we might obtain information of the history of the earthquake activity. Yet, there are several factors which may impact production of rare nuclides such as geometry of fault, topography, geographic location of study area, temporal variations of the Earth's magnetic field, self-cover and denudation rate on the scarp. Our study area, the Knidos Fault Zone, is located on the Datça Peninsula in the Southwestern Anatolia and contains several normal fault scarps formed within the limestone, which are appropriate to apply cosmogenic chlorine-36 dating. Since it has a well-preserved scarp, we have focused on the Mezarlık Segment of the fault zone, which has an average length of 300 m and height 12-15 m. 128 continuous samples from top to bottom of the fault scarp were collected to carry out analysis of cosmic 36Cl isotopes concentrations. Recent research elucidated each step of the application of this method by the Matlab (e.g. Schlagenhauf et al., 2010). It is vitally helpful to generate models activity of normal faults. We, however, wanted to build a user-friendly program through an open source programing language R that might be able to help those without knowledge of complex math, programming, making calculations as easy as possible. We have set out to obtain accurate conclusions to compare and contrast our results with synthetic profiles and previous studies of limestone fault scarps. The preliminary results indicate at least three major or more earthquakes/earthquakes cluster events occurred on the Mezarlık fault within the past 20 kyr; over 10 meters of displacement took place between early Holocene and late Pleistocene. Estimated ages of those three large slip events are 18.7, 15.1 and 10.8 ka respectively. This study was conducted with the Decision of the Council of Ministers with No

The Crimea and Rum in the 13th–14th centuries: The Anatolian Diaspora and Urban Culture of Solkhat »

OpenAIRE

Mark Kramarovsky

2016-01-01

It was within the period between the second half of the thirteenth century and the early fourteenth century that the Northern Black Sea region started to get islamized. Solkhat, the administrative centre of the Golden Horde in the Crimea, played a crucial part in this process. The current paper is concerned with two closely related issues: the Anatolian diaspora and the development of the “Asia Minor” vector in the culture of Solkhat. According to some historical sources, the Seljuk expansion...

Reassessment of probabilistic seismic hazard in the Marmara region

Science.gov (United States)

Kalkan, Erol; Gulkan, Polat; Yilmaz, Nazan; Çelebi, Mehmet

2009-01-01

In 1999, the eastern coastline of the Marmara region (Turkey) witnessed increased seismic activity on the North Anatolian fault (NAF) system with two damaging earthquakes (M 7.4 Kocaeli and M 7.2 D??zce) that occurred almost three months apart. These events have reduced stress on the western segment of the NAF where it continues under the Marmara Sea. The undersea fault segments have been recently explored using bathymetric and reflection surveys. These recent findings helped scientists to understand the seismotectonic environment of the Marmara basin, which has remained a perplexing tectonic domain. On the basis of collected new data, seismic hazard of the Marmara region is reassessed using a probabilistic approach. Two different earthquake source models: (1) the smoothed-gridded seismicity model and (2) fault model and alternate magnitude-frequency relations, Gutenberg-Richter and characteristic, were used with local and imported ground-motion-prediction equations. Regional exposure is computed and quantified on a set of hazard maps that provide peak horizontal ground acceleration (PGA) and spectral acceleration at 0.2 and 1.0 sec on uniform firm-rock site condition (760 m=sec average shear wave velocity in the upper 30 m). These acceleration levels were computed for ground motions having 2% and 10% probabilities of exceedance in 50 yr, corresponding to return periods of about 2475 and 475 yr, respectively. The maximum PGA computed (at rock site) is 1.5g along the fault segments of the NAF zone extending into the Marmara Sea. The new maps generally show 10% to 15% increase for PGA, 0.2 and 1.0 sec spectral acceleration values across much of Marmara compared to previous regional hazard maps. Hazard curves and smooth design spectra for three site conditions: rock, soil, and soft-soil are provided for the Istanbul metropolitan area as possible tools in future risk estimates.

Determination of the Basin Structure Beneath European Side of Istanbul

Science.gov (United States)

Karabulut, Savas; Cengiz Cinku, Mulla; Thomas, Michael; Lamontagne, Maurice

2016-04-01

Istanbul (near North Anatolian Fault Zone:NAFZ, Turkey) is located in northern part of Sea of Marmara, an area that has been influenced by possible Marmara Earthquakes. The general geology of Istanbul divided into two stratigraphic unit such as sedimentary (from Oligocene to Quaternary Deposits) and bedrock (Paleozoic and Eocene). The bedrock units consists of sand stone, clay stone to Paleozoic age and limestone to Eocene age and sedimentary unit consist of sand, clay, mil and gravel from Oligocene to Quaternary age. Earthquake disaster mitigation studies divided into two important phases, too. Firstly, earthquake, soil and engineering structure problems identify for investigation area, later on strategic emergency plan can prepare for these problems. Soil amplification play important role the disaster mitigation and the site effect analysis and basin structure is also a key parameter for determining of site effect. Some geophysical, geological and geotechnical measurements are requeired to defined this relationship. Istanbul Megacity has been waiting possible Marmara Earthquake and their related results. In order to defined to possible damage potential related to site effect, gravity measurements carried out for determining to geological structure, basin geometry and faults in Istanbul. Gravity data were collected at 640 sites by using a Scientrex CG-5 Autogravity meter Standard corrections applied to the gravity data include those for instrumental drift, Earth tides and latitude, and the free-air and Bouguer corrections. The corrected gravity data were imported into a Geosoft database to create a grid and map of the Bouguer gravity anomaly (grid cell size of 200 m). As a previously results, we determined some lineminants, faults and basins beneath Istanbul City. Especially, orientation of faults were NW-SE direction and some basin structures determined on between Buyukcekmece and Kucukcekmece Lake.

A high-resolution aftershock seismicity image of the 2002 Sultandaği-Çay earthquake (Mw = 6.2), Turkey

Science.gov (United States)

Ergin, Mehmet; Aktar, Mustafa; Özalaybey, Serdar; Tapirdamaz, Mustafa C.; Selvi, Oguz; Tarancioglu, Adil

2009-10-01

A moderate-size earthquake (Mw = 6.2) occurred on 3 February 2002 (07:11:28 GMT) in the Sultandağı-Çay region of southwest Turkey. The mainshock was followed by a strong aftershock of Mw = 6.0 just 2 h after the mainshock, at 09:26:49 GMT. A temporary seismic network of 27 vertical component seismometers was installed to monitor aftershock activity. One thousand sixty nine aftershocks (0.2 AAG). The westernmost end of the aftershock activity corresponds to a structurally complex zone distinct from the main rupture. It is characterized by both ENE-WSW- and NNE-SSW-trending oblique-slip normal faulting mechanisms, the latter being associated with the NNE-SSW-trending Karamık Graben. The intersection of these two grabens, AAG and Karamık Graben, provides abundant faults available for failure in this region. The occurrence pattern of large events in recent years indicates a possible migration of earthquakes from east to west. Thus, we conclude that this has an important implication for earthquake hazard for the city of Afyon, which lies along the same fault line and only 20 km west of the termination point of the aftershock zone.

STRUCTURAL VULNERABILITY ASSESSMENT OF MASONRY BUILDINGS IN TURKEY

OpenAIRE

KORKMAZ, Kasım Armagan; CARHOGLU, Asuman Isıl

2011-01-01

Turkey is located in an active seismic zone. Mid to high rise R/C building and low rise masonry buildings are very common construction type in Turkey. In recent earthquakes, lots of existing buildings got damage including masonry buildings. Masonry building history in Turkey goes long years back. For sure, it is an important structure type for Turkey. Therefore, earthquake behavior and structural vulnerability of masonry buildings are crucial issues for Turkey as a earthquake prone country. I...

Novel neural networks-based fault tolerant control scheme with fault alarm.

Science.gov (United States)

Shen, Qikun; Jiang, Bin; Shi, Peng; Lim, Cheng-Chew

2014-11-01

In this paper, the problem of adaptive active fault-tolerant control for a class of nonlinear systems with unknown actuator fault is investigated. The actuator fault is assumed to have no traditional affine appearance of the system state variables and control input. The useful property of the basis function of the radial basis function neural network (NN), which will be used in the design of the fault tolerant controller, is explored. Based on the analysis of the design of normal and passive fault tolerant controllers, by using the implicit function theorem, a novel NN-based active fault-tolerant control scheme with fault alarm is proposed. Comparing with results in the literature, the fault-tolerant control scheme can minimize the time delay between fault occurrence and accommodation that is called the time delay due to fault diagnosis, and reduce the adverse effect on system performance. In addition, the FTC scheme has the advantages of a passive fault-tolerant control scheme as well as the traditional active fault-tolerant control scheme's properties. Furthermore, the fault-tolerant control scheme requires no additional fault detection and isolation model which is necessary in the traditional active fault-tolerant control scheme. Finally, simulation results are presented to demonstrate the efficiency of the developed techniques.

The Geopolitics of Water and Oil in Turkey

International Nuclear Information System (INIS)

2009-01-01

Throughout history, few nations have been as successful in leveraging their geographic location as Turkey. As the center of two of the most powerful civilizations of all time, the Byzantine and Ottoman Empires, Turkey was the bridge between East and West, a bustling center of trade and a strategic economic and political nexus between regions of the world. In addition to its geographic power, Turkey has historically possessed substantial water resources. Unlike many water parched areas of the Middle East, Turkey's water capacity has allowed it to grow large populations and build elaborate cities. In the modern era, Turkey once again has an opportunity to regain its historical role, as the state where today's geopolitics of energy coincides with Turkey's traditional geopolitics of water. Turkey's central location, this time not between East and West, but between producers and consumers of energy, gives it a central, geopolitical role in world affairs, both in oil and gas. Moreover, Turkey's water resources can be utilized to reinforce Turkey's strategic energy role in the region, by building a strategy of cooperation with water-poor countries from the Levant to the Arabian Peninsula. Throughout history, water and energy have been among the most fundamental resources of civilization, at the very base of Maslow's hierarchy of needs essential to fostering human growth and development for thousands of years. It is seldom appreciated how linked water and energy truly are. Producing, transferring, and supplying energy requires a significant amount of water, just as the extraction, purification, and even desalination of water requires a significant amount of energy. As both energy and water grow scarcer throughout the future, nations such as Turkey can gain considerable influence as a result of their geographic locations and natural endowments. Turkey can benefit from pipeline diplomacy, taking advantage of its geographical location to make it a crossroads of multiple

The Geopolitics of Water and Oil in Turkey

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

Throughout history, few nations have been as successful in leveraging their geographic location as Turkey. As the center of two of the most powerful civilizations of all time, the Byzantine and Ottoman Empires, Turkey was the bridge between East and West, a bustling center of trade and a strategic economic and political nexus between regions of the world. In addition to its geographic power, Turkey has historically possessed substantial water resources. Unlike many water parched areas of the Middle East, Turkey's water capacity has allowed it to grow large populations and build elaborate cities. In the modern era, Turkey once again has an opportunity to regain its historical role, as the state where today's geopolitics of energy coincides with Turkey's traditional geopolitics of water. Turkey's central location, this time not between East and West, but between producers and consumers of energy, gives it a central, geopolitical role in world affairs, both in oil and gas. Moreover, Turkey's water resources can be utilized to reinforce Turkey's strategic energy role in the region, by building a strategy of cooperation with water-poor countries from the Levant to the Arabian Peninsula. Throughout history, water and energy have been among the most fundamental resources of civilization, at the very base of Maslow's hierarchy of needs essential to fostering human growth and development for thousands of years. It is seldom appreciated how linked water and energy truly are. Producing, transferring, and supplying energy requires a significant amount of water, just as the extraction, purification, and even desalination of water requires a significant amount of energy. As both energy and water grow scarcer throughout the future, nations such as Turkey can gain considerable influence as a result of their geographic locations and natural endowments. Turkey can benefit from pipeline diplomacy, taking advantage of its geographical location to

Voluntary emission trading potential of Turkey

International Nuclear Information System (INIS)

Ari, İzzet

2013-01-01

Climate change is likely to cause serious market failures, and carbon trading as a market instrument can help correct its negative impacts. The global carbon markets established to combat climate change include regulatory and voluntary markets. Turkey cannot utilise regulatory carbon markets under the Kyoto Protocol. As a result of her unique position in the UNFCCC, some offsetting projects in Turkey have benefitted only voluntary emission trading for the reduction of GHG emissions. Due to on-going climate change negotiation under the UNFCCC, it seems that Turkey will not use the current regulatory carbon markets. Thus, Turkey should promote the use of and participation in voluntary carbon markets. In this article, emission reduction potential via energy efficiency, renewable energy and solid waste management, and corresponding offsetting of credits with their estimated prices is investigated for the period between 2013 and 2020. The emission reduction potential for energy efficiency, renewable energy and solid waste management projects are estimated at 403, 312 and 356 million tons of CO 2 equivalent emissions respectively, totalling 1,071 million tons of CO 2 equivalent. The total revenue of the carbon certificates are estimated in the range of 19,775–33,386 million US Dollars for the same period. -- Highlights: •Turkey has 1,071 million tons GHG emission reduction in three sectors for 2013–2020. •Turkey can only use voluntary emission trading for reduction of GHGs. •Total revenue estimation could be between 19,775 and 33,386 million US Dollars. •Turkey's economy and emissions have been rapidly growing. •Turkey can more easily reduce its emission by using voluntary emission trading

Earliest Mexican Turkeys (Meleagris gallopavo) in the Maya Region: implications for pre-Hispanic animal trade and the timing of turkey domestication.

Science.gov (United States)

Thornton, Erin Kennedy; Emery, Kitty F; Steadman, David W; Speller, Camilla; Matheny, Ray; Yang, Dongya

2012-01-01

Late Preclassic (300 BC-AD 100) turkey remains identified at the archaeological site of El Mirador (Petén, Guatemala) represent the earliest evidence of the Mexican turkey (Meleagris gallopavo) in the ancient Maya world. Archaeological, zooarchaeological, and ancient DNA evidence combine to confirm the identification and context. The natural pre-Hispanic range of the Mexican turkey does not extend south of central Mexico, making the species non-local to the Maya area where another species, the ocellated turkey (Meleagris ocellata), is indigenous. Prior to this discovery, the earliest evidence of M. gallopavo in the Maya area dated to approximately one thousand years later. The El Mirador specimens therefore represent previously unrecorded Preclassic exchange of animals from northern Mesoamerica to the Maya cultural region. As the earliest evidence of M. gallopavo found outside its natural geographic range, the El Mirador turkeys also represent the earliest indirect evidence for Mesoamerican turkey rearing or domestication. The presence of male, female and sub-adult turkeys, and reduced flight morphology further suggests that the El Mirador turkeys were raised in captivity. This supports an argument for the origins of turkey husbandry or at least captive rearing in the Preclassic.

Fault tree handbook

International Nuclear Information System (INIS)

Haasl, D.F.; Roberts, N.H.; Vesely, W.E.; Goldberg, F.F.

1981-01-01

This handbook describes a methodology for reliability analysis of complex systems such as those which comprise the engineered safety features of nuclear power generating stations. After an initial overview of the available system analysis approaches, the handbook focuses on a description of the deductive method known as fault tree analysis. The following aspects of fault tree analysis are covered: basic concepts for fault tree analysis; basic elements of a fault tree; fault tree construction; probability, statistics, and Boolean algebra for the fault tree analyst; qualitative and quantitative fault tree evaluation techniques; and computer codes for fault tree evaluation. Also discussed are several example problems illustrating the basic concepts of fault tree construction and evaluation

Importance of biomass energy sources for Turkey

International Nuclear Information System (INIS)

Demirbas, Ayhan

2008-01-01

Various agricultural residues such as grain dust, crop residues and fruit tree residues are available in Turkey as the sources of biomass energy. Among the biomass energy sources, fuelwood seems to be one of the most interesting because its share of the total energy production of Turkey is high at 21% and the techniques for converting it to useful energy are not necessarily sophisticated. Selection of a particular biomass for energy requirements is influenced by its availability, source and transportation cost, competing uses and prevalent fossil fuel prices. Utilization of biomass is a very attractive energy resource, particularly for developing countries since biomass uses local feedstocks and labor. Like many developing countries, Turkey relies on biomass to provide much of its energy requirement. More efficient use of biomass in producing energy, both electrical and thermal, may allow Turkey to reduce petroleum imports, thus affecting its balance of payments dramatically. Turkey has always been one of the major agricultural countries in the world. The importance of agriculture is increasing due to biomass energy being one of the major resources in Turkey. Biomass waste materials can be used in Turkey to provide centralized, medium- and large-scale production of process heat for electricity production. Turkey's first biomass power project is under development in Adana province, at an installed capacity of 45 MW. Two others, at a total capacity of 30 MW, are at the feasibility study stage in Mersin and Tarsus provinces. Electricity production from biomass has been found to be a promising method in the nearest future in Turkey

Fault isolability conditions for linear systems with additive faults

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Stoustrup, Jakob

2006-01-01

In this paper, we shall show that an unlimited number of additive single faults can be isolated under mild conditions if a general isolation scheme is applied. Multiple faults are also covered. The approach is algebraic and is based on a set representation of faults, where all faults within a set...

Fault diagnosis and fault-tolerant control based on adaptive control approach

CERN Document Server

Shen, Qikun; Shi, Peng

2017-01-01

This book provides recent theoretical developments in and practical applications of fault diagnosis and fault tolerant control for complex dynamical systems, including uncertain systems, linear and nonlinear systems. Combining adaptive control technique with other control methodologies, it investigates the problems of fault diagnosis and fault tolerant control for uncertain dynamic systems with or without time delay. As such, the book provides readers a solid understanding of fault diagnosis and fault tolerant control based on adaptive control technology. Given its depth and breadth, it is well suited for undergraduate and graduate courses on linear system theory, nonlinear system theory, fault diagnosis and fault tolerant control techniques. Further, it can be used as a reference source for academic research on fault diagnosis and fault tolerant control, and for postgraduates in the field of control theory and engineering. .

A summary of the active fault investigation in the extension sea area of Kikugawa fault and the Nishiyama fault , N-S direction fault in south west Japan

Science.gov (United States)

Abe, S.

2010-12-01

In this study, we carried out two sets of active fault investigation by the request from Ministry of Education, Culture, Sports, Science and Technology in the sea area of the extension of Kikugawa fault and the Nishiyama fault. We want to clarify the five following matters about both active faults based on those results. (1)Fault continuity of the land and the sea. (2) The length of the active fault. (3) The division of the segment. (4) Activity characteristics. In this investigation, we carried out a digital single channel seismic reflection survey in the whole area of both active faults. In addition, a high-resolution multichannel seismic reflection survey was carried out to recognize the detailed structure of a shallow stratum. Furthermore, the sampling with the vibrocoring to get information of the sedimentation age was carried out. The reflection profile of both active faults was extremely clear. The characteristics of the lateral fault such as flower structure, the dispersion of the active fault were recognized. In addition, from analysis of the age of the stratum, it was recognized that the thickness of the sediment was extremely thin in Holocene epoch on the continental shelf in this sea area. It was confirmed that the Kikugawa fault extended to the offing than the existing results of research by a result of this investigation. In addition, the width of the active fault seems to become wide toward the offing while dispersing. At present, we think that we can divide Kikugawa fault into some segments based on the distribution form of the segment. About the Nishiyama fault, reflection profiles to show the existence of the active fault was acquired in the sea between Ooshima and Kyushu. From this result and topographical existing results of research in Ooshima, it is thought that Nishiyama fault and the Ooshima offing active fault are a series of structure. As for Ooshima offing active fault, the upheaval side changes, and a direction changes too. Therefore, we

Fault finder

Science.gov (United States)

Bunch, Richard H.

1986-01-01

A fault finder for locating faults along a high voltage electrical transmission line. Real time monitoring of background noise and improved filtering of input signals is used to identify the occurrence of a fault. A fault is detected at both a master and remote unit spaced along the line. A master clock synchronizes operation of a similar clock at the remote unit. Both units include modulator and demodulator circuits for transmission of clock signals and data. All data is received at the master unit for processing to determine an accurate fault distance calculation.

The Sorong Fault Zone, Indonesia: Mapping a Fault Zone Offshore

Science.gov (United States)

Melia, S.; Hall, R.

2017-12-01

The Sorong Fault Zone is a left-lateral strike-slip fault zone in eastern Indonesia, extending westwards from the Bird's Head peninsula of West Papua towards Sulawesi. It is the result of interactions between the Pacific, Caroline, Philippine Sea, and Australian Plates and much of it is offshore. Previous research on the fault zone has been limited by the low resolution of available data offshore, leading to debates over the extent, location, and timing of movements, and the tectonic evolution of eastern Indonesia. Different studies have shown it north of the Sula Islands, truncated south of Halmahera, continuing to Sulawesi, or splaying into a horsetail fan of smaller faults. Recently acquired high resolution multibeam bathymetry of the seafloor (with a resolution of 15-25 meters), and 2D seismic lines, provide the opportunity to trace the fault offshore. The position of different strands can be identified. On land, SRTM topography shows that in the northern Bird's Head the fault zone is characterised by closely spaced E-W trending faults. NW of the Bird's Head offshore there is a fold and thrust belt which terminates some strands. To the west of the Bird's Head offshore the fault zone diverges into multiple strands trending ENE-WSW. Regions of Riedel shearing are evident west of the Bird's Head, indicating sinistral strike-slip motion. Further west, the ENE-WSW trending faults turn to an E-W trend and there are at least three fault zones situated immediately south of Halmahera, north of the Sula Islands, and between the islands of Sanana and Mangole where the fault system terminates in horsetail strands. South of the Sula islands some former normal faults at the continent-ocean boundary with the North Banda Sea are being reactivated as strike-slip faults. The fault zone does not currently reach Sulawesi. The new fault map differs from previous interpretations concerning the location, age and significance of different parts of the Sorong Fault Zone. Kinematic

A random field model for the estimation of seismic hazard. Final report for the period 1 January 1990 - 31 December 1990

International Nuclear Information System (INIS)

Yucemen, S.

1991-02-01

The general theory of stationary random functions is utilized to assess the seismic hazard associated with a linearly extending seismic source. The past earthquake occurrence data associated with a portion of the North Anatolian fault are used to demonstrate the implementation of the proposed model. 18 refs, figs and tabs

A random field model for the estimation of seismic hazard. Final report for the period 1 January 1990 - 31 December 1990

Energy Technology Data Exchange (ETDEWEB)

Yucemen, S [Middle East Technical Univ., Ankara (Turkey). Dept. of Statistics

1991-02-01

The general theory of stationary random functions is utilized to assess the seismic hazard associated with a linearly extending seismic source. The past earthquake occurrence data associated with a portion of the North Anatolian fault are used to demonstrate the implementation of the proposed model. 18 refs, figs and tabs.

Exploring the Curriculum Dimensions of Theories-Based Adult Education--A Sample Course of Southeast Anatolian Region

Science.gov (United States)

Ultanir, Y. Gurcan; Ultanir, Emel

2010-01-01

As a result of social change over the past 20 years, there has been an economy-induced population movement in Turkey from eastern locales and rural areas to western regions and city centres. The effects of this domestic migration exemplify the problems of "integration faced by a migrating population". In Turkey the role of Public…

Wind turbine fault detection and fault tolerant control

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Johnson, Kathryn

2013-01-01

In this updated edition of a previous wind turbine fault detection and fault tolerant control challenge, we present a more sophisticated wind turbine model and updated fault scenarios to enhance the realism of the challenge and therefore the value of the solutions. This paper describes...

Fault-weighted quantification method of fault detection coverage through fault mode and effect analysis in digital I&C systems

Energy Technology Data Exchange (ETDEWEB)

Cho, Jaehyun; Lee, Seung Jun, E-mail: sjlee420@unist.ac.kr; Jung, Wondea

2017-05-15

Highlights: • We developed the fault-weighted quantification method of fault detection coverage. • The method has been applied to specific digital reactor protection system. • The unavailability of the module had 20-times difference with the traditional method. • Several experimental tests will be effectively prioritized using this method. - Abstract: The one of the most outstanding features of a digital I&C system is the use of a fault-tolerant technique. With an awareness regarding the importance of thequantification of fault detection coverage of fault-tolerant techniques, several researches related to the fault injection method were developed and employed to quantify a fault detection coverage. In the fault injection method, each injected fault has a different importance because the frequency of realization of every injected fault is different. However, there have been no previous studies addressing the importance and weighting factor of each injected fault. In this work, a new method for allocating the weighting to each injected fault using the failure mode and effect analysis data was proposed. For application, the fault-weighted quantification method has also been applied to specific digital reactor protection system to quantify the fault detection coverage. One of the major findings in an application was that we may estimate the unavailability of the specific module in digital I&C systems about 20-times smaller than real value when we use a traditional method. The other finding was that we can also classify the importance of the experimental case. Therefore, this method is expected to not only suggest an accurate quantification procedure of fault-detection coverage by weighting the injected faults, but to also contribute to an effective fault injection experiment by sorting the importance of the failure categories.

Fault diagnosis

Science.gov (United States)

Abbott, Kathy

1990-01-01

The objective of the research in this area of fault management is to develop and implement a decision aiding concept for diagnosing faults, especially faults which are difficult for pilots to identify, and to develop methods for presenting the diagnosis information to the flight crew in a timely and comprehensible manner. The requirements for the diagnosis concept were identified by interviewing pilots, analyzing actual incident and accident cases, and examining psychology literature on how humans perform diagnosis. The diagnosis decision aiding concept developed based on those requirements takes abnormal sensor readings as input, as identified by a fault monitor. Based on these abnormal sensor readings, the diagnosis concept identifies the cause or source of the fault and all components affected by the fault. This concept was implemented for diagnosis of aircraft propulsion and hydraulic subsystems in a computer program called Draphys (Diagnostic Reasoning About Physical Systems). Draphys is unique in two important ways. First, it uses models of both functional and physical relationships in the subsystems. Using both models enables the diagnostic reasoning to identify the fault propagation as the faulted system continues to operate, and to diagnose physical damage. Draphys also reasons about behavior of the faulted system over time, to eliminate possibilities as more information becomes available, and to update the system status as more components are affected by the fault. The crew interface research is examining display issues associated with presenting diagnosis information to the flight crew. One study examined issues for presenting system status information. One lesson learned from that study was that pilots found fault situations to be more complex if they involved multiple subsystems. Another was pilots could identify the faulted systems more quickly if the system status was presented in pictorial or text format. Another study is currently under way to

Retrodeforming the Sivas Basin (Turkey): Structural style of the central Anatolian basins and their integration in the geodynamic framework of Eastern Anatolia

Science.gov (United States)

Legeay, Etienne; Ringenbach, Jean-Claude; Callot, Jean-Paul; Mohn, Geoffroy; Kavak, Kaan

2017-04-01

Anatolia is the result of the amalgamation of Gondwandian microcontinents against Eurasia active margin. These were originally separated by several Neotethyan oceanic domains consumed by north-dipping subductions. Prior to the continental collision, regional convergence resulted in an obduction event, from north to south in Campanian time, which led to the emplacement of ophiolite nappes and ophiolitic mélanges onto the Tauride passive margin. Several sedimentary basins subsequently developed above the former sutures zones recorded the long-lasting geological evolution of the Anatolian domain from Late Cretaceous to Present The Sivas Basin is all together the richest, the most studied and also most complex of the group of Tertiary basins. The Sivas Basin formed above the northern leading edge of the Tauride platform, the Kırşehir micro-continent, the edge of the Pontide arc and the related sutures. Its complex structure is that of a fold-and-thrust belt with syn-orogenic salt tectonics. After the obduction, the Sivas basin recorded a relative quiet tectonic phase from Maastrichtian to Paleocene with basinal pelagic sedimentation and carbonate platform emplacement on its southern edge. Then shortening resumed in the Early Eocene with the development of north-verging thrusts. It is recorded by a coarse clastic input, with conglomeratic deltas fans grading up to basinal turbidites until the Late Eocene. Then the basin is progressively isolated and becomes an isolated foreland in which a thick evaporite formation deposited. Oligocene to Miocene continental clastics deposition was then mainly controlled by halokinesis: minibasin, salt ridges and salt sheets development. A first canopy is attributed to the second pulse of contraction from Late-Oligocene to Middle Miocene. This second stage end with the formation of back-thrust within the Sivas Basin and southward as a passive roof above a pre-salt triangle zone. This study relies both on extensive fieldwork (4 Ph

ECONOMIC RELATIONS BETWEEN REPUBLIC OF MOLDOVA AND TURKEY

Directory of Open Access Journals (Sweden)

Bestenigar KARA

2015-07-01

Full Text Available The topic of article is bilateral economical and foreign trade relations between Turkey, which has started to apply outward-oriented economic policies since globalization and Moldova, which has done market transition after breaking up with the Soviet Union. Within this frame, the subject of article has been searched in depth as follows: general overview of Turkey’s economic relations, overall picture of Moldovan-Turkish relations, short exposition of Moldovan economy and bilateral economic and foreign trade relations of Moldova and Turkey. The topic of article is a current issue. Because Moldova, which is closed to Turkey in terms of geography, culture and history always has been an attractive country politico-economically for Turkey since its independence. Bilateral economic relations starting with shuttle trade have formalized and further developed and Turkey became as one of top ten biggest economic and trade partner of Moldova. On this basis, the aim of study is to elucidate foreign trade of Turkey with Moldova and to compare performances of Turkey by years and by other countries, which have remarkable domination in Moldovan market. Within this scope, bilateral trade volume of Moldova and Turkey has increased year by year considering the past decade, which makes Turkey as the 7th largest import and 8th export partner of Moldova. Turkey aims to be one of the first three biggest economic partner of Moldova after entry into force of Free Trade Agreement (FTA, which was signed by both countries in 2014 to increase foreign trade volume up to 1 billion US dollars.

Nursing doctoral education in Turkey.

Science.gov (United States)

Yavuz, Meryem

2004-10-01

Quality health care is an issue of concern worldwide, and nursing can and must play a major and global role in transforming the healthcare environment. Doctorally prepared nurses are very much needed in the discipline to further develop and expand the science, as well as to prepare its future educators, scholars, leaders, and policy makers. In 1968, the Master of Science in Nursing Program was initiated in Turkey, followed by the Nursing Doctoral Education Program in 1972. Six University Schools of Nursing provide nursing doctoral education. By the graduating year of 2001, 154 students had graduated with the Doctor of Philosophy in Nursing (Ph.D.), and 206 students were enrolled in related courses. Many countries in the world are systematically building various collaborative models in their nursing doctoral education programs. Turkey would like to play an active role in creating collaborative nursing doctoral education programs with other countries. This paper centres on the structure and model of doctoral education for nurses in Turkey. It touches on doctoral programs around the world; describes in detail nursing doctoral education in Turkey, including its program structure, admission process, course units, assessment strategies and dissertation procedure; and discusses efforts to promote Turkey as a potential partner in international initiatives to improve nursing doctoral education.

Turkey-U.S. Defense Cooperation: Prospects and Challenges

Science.gov (United States)

2011-04-08

to cultivate stability or to be unduly provocative to neighboring countries. • Arms sales and industrial cooperation: Turkey continues to seek... mushroomed and Kurdish secessionist sentiment within Turkey caused concerns in the 1990s following the establishment of an autonomous Kurdish zone...a member of NATO), and has counted on previously close Turkey-Israel military relations to cultivate U.S.-Turkey-Israel military cooperation

Geochemical and isotopic features of geothermal fluids around the Sea of Marmara, NW Turkey

Science.gov (United States)

Italiano, Francesco; Woith, Heiko; Seyis, Cemil; Pizzino, Luca; Sciarra, Alessandra

2016-04-01

Earthquake processes provoke modifications of the crust affecting the fluid regime with changes in water level in wells, in temperature and/or chemical composition of groundwaters, in the flow-rate of gas discharges and in their chemical and isotopic composition. In the frame of MARsite (MARsite has received funding from the European Union's Seventh Programme for research, technological development and demonstration under grant agreement No 308417) the relationship between fluids and seismogenesis has been approached collecting geochemical data of local significance and evaluating them in geochemical interpretative models of fluids circulation and interactions as well as defining their behaviour over a seismic-prone area. During three fluid sampling campaigns in 2013, 2014, and 2015 a suite of 120 gas samples were collected from 72 thermal and mineral water springs/wells in the wider Marmara region along the Northern and Southern branches of the North Anatolian Fault Zone (NAFZ). Bubbling gases were collected if available, in all other cases the gas phase was extracted from water samples collected on that purpose. Gas samples were analyzed for the main chemical composition as well as their isotopic composition (He and C). The results highlight that the vented gases are a binary mixture of two end-members having nitrogen and carbon dioxide as main components. The geochemical features of the gas phase are the result of several processes that have modified their pristine composition. Atmospheric and deep-originated volatiles mix at variable extents and interact with cold and hot groundwaters. CO2 is normally the main gas species. But it's concentration may decrease due to gas-water interactions (GWI) increasing the relative concentration of N2 and other less soluble gases. A high CO2 content indicates minor interactions. Thus, the easier and faster the pathways are from the deep layers toward the Earth's surface, the lower are the interactions. The volatiles keep

Energy production for environmental issues in Turkey

Science.gov (United States)

Yuksel, Ibrahim; Arman, Hasan; Halil Demirel, Ibrahim

2017-11-01

Due to the diversification efforts of energy sources, use of natural gas that was newly introduced into Turkish economy, has been growing rapidly. Turkey has large reserves of coal, particularly of lignite. The proven lignite reserves are 8.0 billion tons. The estimated total possible reserves are 30 billion tons. Turkey, with its young population and growing energy demand per person, its fast growing urbanization, and its economic development, has been one of the fast growing power markets of the world for the last two decades. It is expected that the demand for electric energy in Turkey will be 580 billion kWh by the year 2020. Turkey's electric energy demand is growing about 6-8% yearly due to fast economic growing. This paper deals with energy demand and consumption for environmental issues in Turkey.

Biotechnology in Turkey: an overview.

Science.gov (United States)

Ozdamar, Tunçer H

2009-07-01

The term biotechnology first appeared in the programs of the Scientific and Technological Research Council of Turkey (TUBITAK) in 1982. The State Planning Organization (SPO) in 1988 defined biotechnology and the scientific fields. Moreover, it put forward an institutional framework and suggested priority areas for research and development. Turkey has been researching and investing in biotechnology for almost four decades. This review covers the development of science and technology policy with its history, consensus and consequences, bio-industries in Turkey, and research activities in biotechnology at Turkish Universities. Details are provided by the research groups in response to a common request for information on their activities and major publications in the field. The information provided has been grouped under thematic topics within the broad theme of biotechnology, and summarized within these topics. Although many aspects of biotechnological research are being pursued in Turkey, it appears that the most common research activities of the field are in fermentation processes, environmental biotechnology, and biomedical engineering.

Human Metapneumovirus in Turkey Poults

Science.gov (United States)

Velayudhan, Binu T.; Nagaraja, Kakambi V.; Thachil, Anil J.; Shaw, Daniel P.; Gray, Gregory C.

2006-01-01

This study was conducted to reexamine the hypothesis that human metapneumovirus (hMPV) will not infect turkeys. Six groups of 2-week-old turkeys (20 per group) were inoculated oculonasally with 1 of the following: noninfected cell suspension; hMPV genotype A1, A2, B1, or B2; or avian metapneumovirus (aMPV) subtype C. Poults inoculated with hMPV showed nasal discharge days 4–9 postexposure. Specific viral RNA and antigen were detected by reverse-transcription PCR and immunohistochemical evaluation, respectively, in nasal turbinates of birds exposed to hMPV. Nasal turbinates of hMPV-infected turkeys showed inflammatory changes and mucus accumulation. Each of the 4 hMPV genotypes caused a transient infection in turkeys as evidenced by clinical signs, detection of hMPV in turbinates, and histopathologic examination. Detailed investigation of cross-species pathogenicity of hMPV and aMPV and its importance for human and animal health is needed. PMID:17235379

Fault zone hydrogeology

Science.gov (United States)

Bense, V. F.; Gleeson, T.; Loveless, S. E.; Bour, O.; Scibek, J.

2013-12-01

Deformation along faults in the shallow crust (research effort of structural geologists and hydrogeologists. However, we find that these disciplines often use different methods with little interaction between them. In this review, we document the current multi-disciplinary understanding of fault zone hydrogeology. We discuss surface- and subsurface observations from diverse rock types from unlithified and lithified clastic sediments through to carbonate, crystalline, and volcanic rocks. For each rock type, we evaluate geological deformation mechanisms, hydrogeologic observations and conceptual models of fault zone hydrogeology. Outcrop observations indicate that fault zones commonly have a permeability structure suggesting they should act as complex conduit-barrier systems in which along-fault flow is encouraged and across-fault flow is impeded. Hydrogeological observations of fault zones reported in the literature show a broad qualitative agreement with outcrop-based conceptual models of fault zone hydrogeology. Nevertheless, the specific impact of a particular fault permeability structure on fault zone hydrogeology can only be assessed when the hydrogeological context of the fault zone is considered and not from outcrop observations alone. To gain a more integrated, comprehensive understanding of fault zone hydrogeology, we foresee numerous synergistic opportunities and challenges for the discipline of structural geology and hydrogeology to co-evolve and address remaining challenges by co-locating study areas, sharing approaches and fusing data, developing conceptual models from hydrogeologic data, numerical modeling, and training interdisciplinary scientists.

GLOBAL SOURCING: A THEORETICAL STUDY ON TURKEY

Directory of Open Access Journals (Sweden)

Aytac GOKMEN

2010-07-01

Full Text Available Global sourcing is to source from the global market for goods and services across national boundaries in order to take advantage of the global efficiencies in the delivery of a product or service. Such efficiencies are consists of low cost skilled labor, low cost raw materials and other economic factors like tax breaks and deductions as well as low trade tariffs. When we assess the case regarding to Turkey, global sourcing is an effective device for some firms. The domestic firms in Turkey at various industries are inclined to global source finished or intermediate goods from the world markets, finish the production process in Turkey and export. Eventually, on the one hand the export volume of Turkey increases, but on the other hand the import of a considerable volume of finished or intermediate goods bring about a negative trade balance and loss of jobs in Turkey. Therefore, the objective of this study is to assess the concept of global sourcing transactions on Turkey resting on comprehensive publications.

Hepatic lipidosis in turkeys.

Science.gov (United States)

Gazdzinski, P; Squires, E J; Julian, R J

1994-01-01

Two flocks of 14,000 twenty-week-old turkey hens each experienced increased mortality due to hepatic lipidosis. Some hens showed signs of dyspnea and cyanosis before death. Necropsy revealed dark muscles and enlarged livers with pale areas and numerous hemorrhages. Petechial and ecchymotic hemorrhages were also found on the abdominal fat and epicardium. Lung congestion and edema were prominent. In the heart and blood vessels, the blood was uncoagulated. Mortality was elevated for 12 days and resulted in the death of 0.7% of the turkey hens in one flock and 1.7% in the other. Vitamin E administered in water at a dose of 25 IU per hen appeared to reduce mortality. The nutritional and environmental factors that may contribute to the development of hepatic lipidosis in turkeys are discussed.

Imaging of Subsurface Faults using Refraction Migration with Fault Flooding

KAUST Repository

Metwally, Ahmed Mohsen Hassan

2017-05-31

We propose a novel method for imaging shallow faults by migration of transmitted refraction arrivals. The assumption is that there is a significant velocity contrast across the fault boundary that is underlain by a refracting interface. This procedure, denoted as refraction migration with fault flooding, largely overcomes the difficulty in imaging shallow faults with seismic surveys. Numerical results successfully validate this method on three synthetic examples and two field-data sets. The first field-data set is next to the Gulf of Aqaba and the second example is from a seismic profile recorded in Arizona. The faults detected by refraction migration in the Gulf of Aqaba data were in agreement with those indicated in a P-velocity tomogram. However, a new fault is detected at the end of the migration image that is not clearly seen in the traveltime tomogram. This result is similar to that for the Arizona data where the refraction image showed faults consistent with those seen in the P-velocity tomogram, except it also detected an antithetic fault at the end of the line. This fault cannot be clearly seen in the traveltime tomogram due to the limited ray coverage.

Imaging of Subsurface Faults using Refraction Migration with Fault Flooding

KAUST Repository

Metwally, Ahmed Mohsen Hassan; Hanafy, Sherif; Guo, Bowen; Kosmicki, Maximillian Sunflower

2017-01-01

We propose a novel method for imaging shallow faults by migration of transmitted refraction arrivals. The assumption is that there is a significant velocity contrast across the fault boundary that is underlain by a refracting interface. This procedure, denoted as refraction migration with fault flooding, largely overcomes the difficulty in imaging shallow faults with seismic surveys. Numerical results successfully validate this method on three synthetic examples and two field-data sets. The first field-data set is next to the Gulf of Aqaba and the second example is from a seismic profile recorded in Arizona. The faults detected by refraction migration in the Gulf of Aqaba data were in agreement with those indicated in a P-velocity tomogram. However, a new fault is detected at the end of the migration image that is not clearly seen in the traveltime tomogram. This result is similar to that for the Arizona data where the refraction image showed faults consistent with those seen in the P-velocity tomogram, except it also detected an antithetic fault at the end of the line. This fault cannot be clearly seen in the traveltime tomogram due to the limited ray coverage.

Turkey's natural gas necessity, consumption and future perspectives

International Nuclear Information System (INIS)

Kilic, A.M.

2006-01-01

Turkey is an important candidate to be the 'energy corridor' in the transmission of the abundant oil and natural gas resources of the Middle East and Middle Asia countries to the Western market. Furthermore, Turkey is planning to increase its oil and gas pipeline infrastructure to accommodate its increased energy consumption. Naturally, Turkish natural gas usage is projected to increase remarkably in coming years, with the prime consumers, expected to be industry and power plants. Energy demand of Turkey is growing by 8% annually, one of the highest rates in the world. In addition, natural gas consumption is the fastest growing primary energy source in Turkey. Gas sales started at 0.5 bcm (billion cubic meters), in 1987 and reached approximately 22 bcm in 2003. This article deals with energy policies and natural gas consumption of Turkey. Besides modernization of present lines and realization of capacity increase, new lines will also be needed. In this context, Turkey, due to its geographical location is, in an important position to vary European supply. Therefore, Turkey's role as a transitory area gains importance

Architecture of thrust faults with alongstrike variations in fault-plane dip: anatomy of the Lusatian Fault, Bohemian Massif

Czech Academy of Sciences Publication Activity Database

Coubal, Miroslav; Adamovič, Jiří; Málek, Jiří; Prouza, V.

2014-01-01

Roč. 59, č. 3 (2014), s. 183-208 ISSN 1802-6222 Institutional support: RVO:67985831 ; RVO:67985891 Keywords : fault architecture * fault plane geometry * drag structures * thrust fault * sandstone * Lusatian Fault Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.405, year: 2014

Thorium research and development in Turkey

International Nuclear Information System (INIS)

Güngör, Görkem

2015-01-01

Turkey has a great potential regarding thorium resources. Thorium exploration activities have been done in the past mainly by state organizations for determining the thorium resources in Turkey. Thorium occurs as complex mineral together with barite, fluorite and rare earth elements (REE). The increase in global demand for REE creates the opportunity for REE production which will also produce thorium as a by-product. The development of nuclear energy program in Turkey provides the stimulus for research and development activities in nuclear technologies. The final declaration of the workshop emphasizes the importance of thorium reserves in Turkey and the necessity for thorium exploration and development activities in order to determine the feasibility of thorium mining and fuel cycle in Turkey. These activities should be conducted together with the development of technologies for separation of these complex minerals and purification of thorium, REE and other minerals to be utilized as commercial products. There are advanced academic research studies on thorium fuel cycle which should be supported by the industry in order to commercialize the results of these studies. Turkey should be integrated to international R and D activities on ADS which is expected to commercialize on medium term. The legislative framework should be developed in order to provide the industrial baseline for nuclear technologies independent from nuclear regulatory activities

Extensional Tectonics of SW Anatolia In relation to Slab Edge Processes in the Eastern Mediterranean

Science.gov (United States)

Kaymakci, N.; Özacar, A.; Langereis, C. G.; Ozkaptan, M.; Koç, A.; Uzel, B.; Gulyuz, E.; Sözbilir, H.

2017-12-01

The tectonics of SW Anatolia is expressed in terms of emplacement of Lycian Nappes during the Eocene to Middle Miocene and synconvergent extension as part of the Aegean-West Anatolian extensional tectonic regime. Recent studies identified that there is a tear in the northwards subducting African Oceanic lithosphere along the Pliny-Strabo Trenches (PST). Such tears are coined as Subduction Transform-Edge Propagator (STEP) faults developed high angle to trenches. Hypothetically, the evolution of a STEP fault is somewhat similar to strike-slip fault zones and resultant asymmetric role-back of the subducting slab leads to differential block rotations and back arc type extension on the overriding plate. Recent studies claimed that the tear along the PST propagated NE on-land and developed Fethiye-Burdur Fault/Shear Zone (FBFZ) in SW Turkey. We have conducted a rigorous paleomagnetic study containing more than 3000 samples collected from 88 locations and 11700 fault slip data sets from 198 locations distributed evenly all over SW Anatolia spanning from Middle Miocene to Late Pliocene to test if FBFZ ever existed. The results show that there is slight (20°) counter-clockwise rotation distributed uniformly almost whole SW Anatolia and there is no change in the rotation senses and amounts on either side of the FBFZ implying no differential rotation within the zone. Additionally, constructed paleostress configurations, along the so-called FBFZ and within the 300 km diameter of the proposed fault zone, indicated that almost all the faults that are parallel to subparallel to the zone are almost pure normal faults similar to earthquake focal mechanisms suggesting active extension in the region. It is important to note that we have not encountered any significant strike-slip motion parallel to so-called "FBFZ" to support presence and transcurrent nature of it. On the contrary, the region is dominated by extensional deformation and strike-slip components are observed only on the

Fault-tolerant cooperative output regulation for multi-vehicle systems with sensor faults

Science.gov (United States)

Qin, Liguo; He, Xiao; Zhou, D. H.

2017-10-01

This paper presents a unified framework of fault diagnosis and fault-tolerant cooperative output regulation (FTCOR) for a linear discrete-time multi-vehicle system with sensor faults. The FTCOR control law is designed through three steps. A cooperative output regulation (COR) controller is designed based on the internal mode principle when there are no sensor faults. A sufficient condition on the existence of the COR controller is given based on the discrete-time algebraic Riccati equation (DARE). Then, a decentralised fault diagnosis scheme is designed to cope with sensor faults occurring in followers. A residual generator is developed to detect sensor faults of each follower, and a bank of fault-matching estimators are proposed to isolate and estimate sensor faults of each follower. Unlike the current distributed fault diagnosis for multi-vehicle systems, the presented decentralised fault diagnosis scheme in each vehicle reduces the communication and computation load by only using the information of the vehicle. By combing the sensor fault estimation and the COR control law, an FTCOR controller is proposed. Finally, the simulation results demonstrate the effectiveness of the FTCOR controller.

Robust Mpc for Actuator–Fault Tolerance Using Set–Based Passive Fault Detection and Active Fault Isolation

Directory of Open Access Journals (Sweden)

Xu Feng

2017-03-01

Full Text Available In this paper, a fault-tolerant control (FTC scheme is proposed for actuator faults, which is built upon tube-based model predictive control (MPC as well as set-based fault detection and isolation (FDI. In the class of MPC techniques, tubebased MPC can effectively deal with system constraints and uncertainties with relatively low computational complexity compared with other robust MPC techniques such as min-max MPC. Set-based FDI, generally considering the worst case of uncertainties, can robustly detect and isolate actuator faults. In the proposed FTC scheme, fault detection (FD is passive by using invariant sets, while fault isolation (FI is active by means of MPC and tubes. The active FI method proposed in this paper is implemented by making use of the constraint-handling ability of MPC to manipulate the bounds of inputs.

High prevalence of turkey parvovirus in turkey flocks from Hungary experiencing enteric disease syndromes.

Science.gov (United States)

Palade, Elena Alina; Demeter, Zoltán; Hornyák, Akos; Nemes, Csaba; Kisary, János; Rusvai, Miklós

2011-09-01

Samples collected in 2008 and 2009, from 49 turkey flocks of 6 to 43 days in age and presenting clinical signs of enteric disease and high mortality, were tested by polymerase chain reaction and reverse transcription-polymerase chain reaction for the presence of viruses currently associated with enteric disease (ED) syndromes: astrovirus, reovirus, rotavirus, coronavirus, adenovirus, and parvovirus. Turkey astroviruses were found in 83.67% of the cases and turkey astrovirus 2 (TAst-2) in 26.53%. The investigations directly demonstrated the high prevalence of turkey parvovirus (TuPV) in 23 flocks (46.9%) experiencing signs of ED, making this pathogen the second most identified after astroviruses. Phylogenetic analysis on a 527 base pair-long region from the NS1 gene revealed two main clusters, a chicken parvovirus (ChPV) and a TuPV group, but also the presence of a divergent branch of tentatively named "TuPV-like ChPV" strains. The 23 Hungarian TuPV strains were separately positioned in two groups from the American origin sequences in the TuPV cluster. An Avail-based restriction fragment length polymorphism assay has also been developed for the quick differentiation of TuPV, ChPV, and divergent TuPV-like ChPV strains. As most detected enteric viruses have been directly demonstrated in healthy turkey flocks as well, the epidemiology of this disease complex remains unclear, suggesting that a certain combination of pathogens, environmental factors, or both are necessary for the development of clinical signs.

Determining on-fault magnitude distributions for a connected, multi-fault system

Science.gov (United States)

Geist, E. L.; Parsons, T.

2017-12-01

A new method is developed to determine on-fault magnitude distributions within a complex and connected multi-fault system. A binary integer programming (BIP) method is used to distribute earthquakes from a 10 kyr synthetic regional catalog, with a minimum magnitude threshold of 6.0 and Gutenberg-Richter (G-R) parameters (a- and b-values) estimated from historical data. Each earthquake in the synthetic catalog can occur on any fault and at any location. In the multi-fault system, earthquake ruptures are allowed to branch or jump from one fault to another. The objective is to minimize the slip-rate misfit relative to target slip rates for each of the faults in the system. Maximum and minimum slip-rate estimates around the target slip rate are used as explicit constraints. An implicit constraint is that an earthquake can only be located on a fault (or series of connected faults) if it is long enough to contain that earthquake. The method is demonstrated in the San Francisco Bay area, using UCERF3 faults and slip-rates. We also invoke the same assumptions regarding background seismicity, coupling, and fault connectivity as in UCERF3. Using the preferred regional G-R a-value, which may be suppressed by the 1906 earthquake, the BIP problem is deemed infeasible when faults are not connected. Using connected faults, however, a solution is found in which there is a surprising diversity of magnitude distributions among faults. In particular, the optimal magnitude distribution for earthquakes that participate along the Peninsula section of the San Andreas fault indicates a deficit of magnitudes in the M6.0- 7.0 range. For the Rodgers Creek-Hayward fault combination, there is a deficit in the M6.0- 6.6 range. Rather than solving this as an optimization problem, we can set the objective function to zero and solve this as a constraint problem. Among the solutions to the constraint problem is one that admits many more earthquakes in the deficit magnitude ranges for both faults

Solar potential in Turkey

International Nuclear Information System (INIS)

Soezen, Adnan; Arcaklioglu, Erol

2005-01-01

Most of the locations in Turkey receive abundant solar-energy, because Turkey lies in a sunny belt between 36 deg. and 42 deg. N latitudes. Average annual temperature is 18 to 20 deg. C on the south coast, falls to 14-16 deg. C on the west coat, and fluctuates between 4 and 18 deg. C in the central parts. The yearly average solar-radiation is 3.6 kW h/m 2 day, and the total yearly radiation period is ∼2610 h. In this study, a new formulation based on meteorological and geographical data was developed to determine the solar-energy potential in Turkey using artificial neural-networks (ANNs). Scaled conjugate gradient (SCG), Pola-Ribiere conjugate gradient (CGP), and Levenberg-Marquardt (LM) learning algorithms and logistic sigmoid (logsig) transfer function were used in the networks. Meteorological data for last four years (2000-2003) from 12 cities (Canakkale, Kars, Hakkari, Sakarya, Erzurum, Zonguldak, Balikesir, Artvin, Corum, Konya, Siirt, and Tekirdag) spread over Turkey were used in order to train the neural-network. Meteorological and geographical data (latitude, longitude, altitude, month, mean sunshine-duration, and mean temperature) are used in the input layer of the network. Solar-radiation is in the output layer. The maximum mean absolute percentage error was found to be less than 3.832% and R 2 values to be about 99.9738% for the selected stations. The ANN models show greater accuracy for evaluating solar-resource possibilities in regions where a network of monitoring stations has not been established in Turkey. This study confirms the ability of the ANN to predict solar-radiation values accurately

The origin of Anatolian relations of the type keššar : kiššeran and Balto-Slavic relations of the type akmuo/kamy : akmeni/kamen[jer

Directory of Open Access Journals (Sweden)

Metka Furlan

2008-12-01

Full Text Available Only anatolian relations of the type keššar : kiššeran and Balto-Slavic relations of the type akmuo/kamy : akmenį/kamenь still preserve the PIE paradigmatic innovation within the PIE holokinetic AP, caused by the comparable function (quo? of the locative and accusative.

Exchange Rate Pass-Through in Turkey

OpenAIRE

Marco Rossi; Daniel Leigh

2002-01-01

In light of the strong correlation between exchange rate movements and domestic prices in Turkey, it is important to assess the impact of the exchange rate on domestic prices, in particular as Turkey moves to an inflation targeting regime. This paper uses a recursive vector autoregression model to investigate the impact of exchange rate movements on prices in Turkey. We find that (i) the impact of the exchange rate on prices is over after about a year, but is mostly felt in the first four mon...

The present status of safeguards in Turkey

International Nuclear Information System (INIS)

Yilmazer, A.; Yuecel, A.

2001-01-01

Republic of Turkey signed Non-Proliferation Treaty (NPT) in Vienna, Austria on January 28, 1969 and the Treaty was ratified by Turkish Parliament on March 29, 1979. International Atomic Energy Agency (IAEA) and Republic of Turkey signed the Safeguards Agreement on June 30, 1981. Turkey accepted the international safeguards administered by IAEA and at the same time its subsidiary arrangements and Facility attachments were enforced for all nuclear facilities as an Non-Nuclear-Weapon State party to NPT. Regulation on Nuclear Materials Accounting and Control, which was prepared in accordance with Agreement Between the Government of Turkey and IAEA for the application of Safeguard in Connection with the Treaty on NPT, has been put into force since it was published in Official Gazette on September 10, 1997. This study presents the essential futures of national system of accounting for and control of nuclear materials in Turkey

Fault-Tolerant Approach for Modular Multilevel Converters under Submodule Faults

DEFF Research Database (Denmark)

Deng, Fujin; Tian, Yanjun; Zhu, Rongwu

2016-01-01

The modular multilevel converter (MMC) is attractive for medium- or high-power applications because of the advantages of its high modularity, availability, and high power quality. The fault-tolerant operation is one of the important issues for the MMC. This paper proposed a fault-tolerant approach...... for the MMC under submodule (SM) faults. The characteristic of the MMC with arms containing different number of healthy SMs under faults is analyzed. Based on the characteristic, the proposed approach can effectively keep the MMC operation as normal under SM faults. It can effectively improve the MMC...

Geochemical element mobility during the hydrothermal alteration in the Tepeoba porphyry Cu-Mo-Au deposits at Balikesir, NW Turkey

Science.gov (United States)

Abdelnasser, Amr; Kiran Yildirim, Demet; Doner, Zeynep; Kumral, Mustafa

2016-04-01

The Tepeoba porphyry Cu-Mo-Au deposit represents one of the important copper source and mineral deposits in the Anatolian tectonic belt at Balikesir province, NW Turkey. It considered as a vein-type deposit locally associated with intense hydrothermal alteration within the brecciation, quartz stockwork veining, and brittle fracture zones in the main host rock that represented by hornfels, as well as generally related to the shallow intermediate to silicic intrusive Eybek pluton. Based on the field and geologic relationships and types of ore mineral assemblages and the accompanied alteration types, there are two mineralization zones; hypogene (primary) and oxidation/supergene zones are observed associated with three alteration zones; potassic, phyllic, and propylitic zones related to this porphyry deposit. The phyllic and propylitic alterations locally surrounded the potassic alteration. The ore minerals related to the hypogene zone represented by mostly chalcopyrite, Molybdenite, and pyrite with subordinate amount of marcasite, enargite, and gold. On the other hand they include mainly cuprite with chalcopyrite, pyrite and gold as well as hematite and goethite at the oxidation/supergene zone. This study deals with the quantitative calculations of the mass/volume changes (gains and losses) of the major and trace elements during the different episodes of alteration in this porphyry deposit. These mass balance data reveal that the potassic alteration zone that the main Cu- and Mo-enriched zone, has enrichment of K, Si, Fe, and Mg, and depletion of Na referring to replacement of plagioclase and amphibole by K-feldspar, sericite and biotite. While the propylitic alteration that is the main Mo- and Au-enriched zone is accompanied with K and Na depletion with enrichment of Si, Fe, Mg, and Ca forming chlorite, epidote, carbonate and pyrite. On the other hand the phyllic alteration that occurred in the outer part around the potassic alteration, characterized by less amount

Thalassemias and hemoglobinopathies in Turkey.

Science.gov (United States)

Canatan, Duran

2014-01-01

Thalassemias and hemoglobinopathies are a serious health problem in Turkey. There is a 70-year history of thalassemia in Turkey. The first patient with β-thalassemia major (β-TM) was reported in 1941. The first clinical and hematological studies were published by Aksoy in 1958. The overall incidence of β-thalassemia (β-thal) was reported by Çavdar and Arcasoy to be 2.1% in 1971. Important steps such as written regulations, education and prevention campaigns, have been taken to prevent thalassemia in Turkey by the Ministry of Health (MOH), the Turkish National Hemoglobinopathy Council (TNHC) and the Thalassemia Federation of Turkey (TFT) since 2000. A national hemoglobinopathy prevention program was started in provinces with a high prevalence by the MOH in 2003. While the percentage of premarital screening test was 30.0% of all couples in 2003, it reached 86.0% in 2013. While the number of newborn with thalassemias and hemoglobinopathies was 272 in 2002, it had dropped to 25 in 2010. There has been a 90.0% reduction of affected births in the last 10 years.

PARASITIC MITES IN BACKYARD TURKEYS

Directory of Open Access Journals (Sweden)

Marco Antonio Camacho-Escobar

2010-02-01

Full Text Available To describe the parasitic mites in backyard turkeys, was did this work. The mites were obtain by hand for 30 backyard turkeys in Oaxaca’s Coast region, Mexico; the mites were mount in adhesive paper and wash with the 200X lent in a computer optical microscopy, the parasites size were determinate in the pictures obtained by the microscopy software, the images were sized using a specialist software for it, which relate the number of pixels in the picture with the size of the observation field. Were indentified the species Dermanyssus gallinae, Megninia ginglymura and Ornithonyssus sylviarum, the last two described for first time in backyard turkeys in Mexico. Â

Rectifier Fault Diagnosis and Fault Tolerance of a Doubly Fed Brushless Starter Generator

Directory of Open Access Journals (Sweden)

Liwei Shi

2015-01-01

Full Text Available This paper presents a rectifier fault diagnosis method with wavelet packet analysis to improve the fault tolerant four-phase doubly fed brushless starter generator (DFBLSG system reliability. The system components and fault tolerant principle of the high reliable DFBLSG are given. And the common fault of the rectifier is analyzed. The process of wavelet packet transforms fault detection/identification algorithm is introduced in detail. The fault tolerant performance and output voltage experiments were done to gather the energy characteristics with a voltage sensor. The signal is analyzed with 5-layer wavelet packets, and the energy eigenvalue of each frequency band is obtained. Meanwhile, the energy-eigenvalue tolerance was introduced to improve the diagnostic accuracy. With the wavelet packet fault diagnosis, the fault tolerant four-phase DFBLSG can detect the usual open-circuit fault and operate in the fault tolerant mode if there is a fault. The results indicate that the fault analysis techniques in this paper are accurate and effective.

The Socioeconomic and Demographic Features of Children with Cerebral Palsi Applied to our Centre from Southern Eastern Anatolian Region

Directory of Open Access Journals (Sweden)

Sedat Nacitarhan

2005-01-01

Full Text Available Cerebral palsy is a general term which is used to describe a group of disorders that define muscle control impairment due to lesion in the developing brain. The aim of the present study was to indicate the common features of the children with cerebral palsy and their families in South Eastern region of Turkey, the most underdeveloped community in our country. In addition, the rate of marriage between the relatives (consanguineous marriage is higher in this region than the other regions.A total of 258 children with a diagnosis of cerebral palsy were enrolled to our study. These children were born in South Eastern Anatolian region and live here throughout their childhood. Their families were also living in this region. The members of the families were interviewed with the questionnaire to obtain information. Statistical analysis of the results was performed with Graphpad Prism Ver 3.00.68.99 percent of the patients in our study were men, and 31.01 percent were women. They were between the ages of 10-375 months, average was 75.43±59.15 months. Rate of people, who was not under any social security guarantee, was 15.5%. 50.3% of mothers were not literate. Families’ income was 8.5% good, 42.6% poor. In families, there was 33.3% rate of relationship between partners (consanguineous marriage. In 15.5% of families, there was another retarded child. 55 percent of mothers were never been under health check in pregnancy period. Retarded child was usually from first delivery (26.3%. 3.1% of our patients had twin pregnancy. Only 59,6% of the whole births were given at the hospital or by the help of a midwife. Children were suckled along 6.4±6.4 months. Only 8,5% of the children were being educated.Finally, we concluded that reducing convertible risk factors caused by the low education level of our region, underdeveloped socioeconomic conditions and some traditions (e.g. consanguineous marriage and delivery in house instead of health organization has

Eastern Mediterranean geothermal resources and subduction dynamics

Science.gov (United States)

Roche, Vincent; Sternai, Pietro; Guillou-Frottier, Laurent; Jolivet, Laurent; Gerya, Taras

2017-04-01

The Aegean-Anatolian retreating subduction and collision zones have been investigated through 3D numerical geodynamic models involving slab rollback/tearing/breakoff constrained by, for instance, seismic tomography or anisotropy and geochemical proxies. Here, we integrate these investigations by using the well documented geothermal anomalies geothermal anomalies. First, we use 3D high-resolution thermo-mechanical numerical models to quantify the potential contribution of the past Aegean-Anatolian subduction dynamics to such present-day measured thermal anomalies. Results suggest an efficient control of subduction-related asthenospheric return flow on the regional distribution of thermal anomalies. Our quantification shows that the slab-induced shear heating at the base of the crust could partly explain the high heat flow values above the slab tear (i.e. in the Menderes Massif, Western Turkey). Second, the associated thermal signature at the base of the continental crust is used as basal thermal boundary condition for 2D crustal-scale models dedicated to the understanding of heat transfer from the abnormally hot mantle to the shallow geothermal reservoir. These models couple heat transfer and fluid flow equations with appropriate fluid and rock physical properties. Results suggest that permeable low-angle normal faults (detachments) in the back-arc region can control the bulk of the heat transport and fluid circulation patterns. We suggest that detachments can drain crustal and/or mantellic fluids up to several kilometers depths. At the basin-scale, we show that the permeability of detachments may control the reservoirs location. Temperatures at the base of detachments may be subject to protracted increase (due to anomalously high basal heat flow) through time, thereby generating dome-shaped thermal structures. These structures, usually with 20km characteristic wavelength, may reach the Moho involving lateral rheological contrasts and possibly crustal

Fault displacement along the Naruto-South fault, the Median Tectonic Line active fault system in the eastern part of Shikoku, southwestern Japan

OpenAIRE

高田, 圭太; 中田, 高; 後藤, 秀昭; 岡田, 篤正; 原口, 強; 松木, 宏彰

1998-01-01

The Naruto-South fault is situated of about 1000m south of the Naruto fault, the Median Tectonic Line active fault system in the eastern part of Shikoku. We investigated fault topography and subsurface geology of this fault by interpretation of large scale aerial photographs, collecting borehole data and Geo-Slicer survey. The results obtained are as follows; 1) The Naruto-South fault runs on the Yoshino River deltaic plain at least 2.5 km long with fault scarplet. the Naruto-South fault is o...

Robust Fault Diagnosis Design for Linear Multiagent Systems with Incipient Faults

Directory of Open Access Journals (Sweden)

Jingping Xia

2015-01-01

Full Text Available The design of a robust fault estimation observer is studied for linear multiagent systems subject to incipient faults. By considering the fact that incipient faults are in low-frequency domain, the fault estimation of such faults is proposed for discrete-time multiagent systems based on finite-frequency technique. Moreover, using the decomposition design, an equivalent conclusion is given. Simulation results of a numerical example are presented to demonstrate the effectiveness of the proposed techniques.

THE END OF IMF - TURKEY RELATIONSHIP

Directory of Open Access Journals (Sweden)

ZUNGUN DENIZ

2013-07-01

Full Text Available Abstract: IMF has been created to make international cooperation on financial matters stronger and for solving the problems of balance of payment. However, the IMF formed policies in order to solve problems of balance of payment till the 1980s, expanded its effectiveness much more by controlling the structural adjustment programs after the 1980s, and undertook the role as an international lender of last resort on crises caused by globalization trends. In developing nations, foreign and domestic deficit occurred due to infrastructural causes that have created economic instabilities portrayed through inflation and unemployment. Especially foreign debt problems sourced by the foreign trade deficit transformed into an economic crisis for these countries. Many countries affected by such economic crisis applied to IMF and its Stabilization Program with the aim of providing economic stability in the hopes of recovering. The important thing here to point out is that the economic programs used by countries during their economic crisis are supported by the IMF in reality. In this situation Mexico and Argentina can be given as a good example. IMF has undertaken the same mission in Turkey with seven stabilization programs put in practice and nineteen Stand-By Arrangements between them. But IMF has failed many times in Turkey just like in many developing countries. This is because IMF did not take into consideration economic and social structure of countries in stabilization programs put in practice. Today, Turkey has reached to an important point from the way of its relationship with IMF; more clearly, Turkey is determined to achieve its future without IMF. Turkey-IMF relationship in the framework of stand-by agreements in the past half century of our economic and political history has come to an ending point. After a period of 51 years of intense relations, Turkey decided to determine its calculations of credit limit by the way of advantages and

S1 satellite DNA repetitive units display identical structure and overall variability in all Anatolian brown frog taxa.

Science.gov (United States)

Picariello, Orfeo; Feliciello, Isidoro; Chinali, Gianni

2016-02-01

S1 satellite DNA from Palearctic brown frogs has a species-specific structure in all European species. We characterized S1 satellite DNA from the Anatolian brown frogs Rana macrocnemis, R. camerani, and R. holtzi in order to define their taxonomic rank and the structure of this satellite in this frog lineage. Southern blots of genomic DNA digested with KpnI, EcoRV, NdeI, NheI, or StuI produced the same pattern of satellite DNA bands. Moreover, quantitative dot blots showed that this satellite DNA accounts for 0.1 % of the genome in all taxa. Analysis of the overall genomic variability of the S1a repeat sequence in specimens from various populations demonstrated that this repetitive unit also has the same size (476 bp), the same most common sequence (MCS) and the same overall variability in all three taxa, and also in R. macrocnemis tavasensis. The S1a repetitive unit presents three deletions of 9, 8 and 1 bp compared to the 494-bp S1a repeat from European frogs. The S1a MCS has three variable positions (sequence WWTK in positions 183-186), due to the presence of two repeat subpopulations with motifs AATG and WWTT in all taxa. Unlike previously analyzed mitochondrial and nuclear sequences that show considerable variations among these taxa, no difference could be detected in the structure and variability of the S1 satellite repetitive units. This suggests that these taxa should belong to a single species. Our results indicate that this satellite DNA variety probably formed when the Anatolian lineage radiated from common ancestor about 4 mya, and since then has maintained its structure in all four taxa examined.

Stafford fault system: 120 million year fault movement history of northern Virginia

Science.gov (United States)

Powars, David S.; Catchings, Rufus D.; Horton, J. Wright; Schindler, J. Stephen; Pavich, Milan J.

2015-01-01

The Stafford fault system, located in the mid-Atlantic coastal plain of the eastern United States, provides the most complete record of fault movement during the past ~120 m.y. across the Virginia, Washington, District of Columbia (D.C.), and Maryland region, including displacement of Pleistocene terrace gravels. The Stafford fault system is close to and aligned with the Piedmont Spotsylvania and Long Branch fault zones. The dominant southwest-northeast trend of strong shaking from the 23 August 2011, moment magnitude Mw 5.8 Mineral, Virginia, earthquake is consistent with the connectivity of these faults, as seismic energy appears to have traveled along the documented and proposed extensions of the Stafford fault system into the Washington, D.C., area. Some other faults documented in the nearby coastal plain are clearly rooted in crystalline basement faults, especially along terrane boundaries. These coastal plain faults are commonly assumed to have undergone relatively uniform movement through time, with average slip rates from 0.3 to 1.5 m/m.y. However, there were higher rates during the Paleocene–early Eocene and the Pliocene (4.4–27.4 m/m.y), suggesting that slip occurred primarily during large earthquakes. Further investigation of the Stafford fault system is needed to understand potential earthquake hazards for the Virginia, Maryland, and Washington, D.C., area. The combined Stafford fault system and aligned Piedmont faults are ~180 km long, so if the combined fault system ruptured in a single event, it would result in a significantly larger magnitude earthquake than the Mineral earthquake. Many structures most strongly affected during the Mineral earthquake are along or near the Stafford fault system and its proposed northeastward extension.

InSAR velocity field across the North Anatolian Fault (eastern Turkey): Implications for the loading and release of interseismic strain accumulation

KAUST Repository

Cakir, Ziyadin; Ergintav, Semih; Akoğlu, Ahmet M.; Ç akmak, Rahşan; Tatar, Orhan; Meghraoui, Mustapha

2014-01-01

We use the Persistent Scatterer Interferometric Synthetic Aperture Radar (PS-InSAR) technique with the European Space Agency's Envisat and ERS SAR data acquired on three neighboring descending tracks (T350, T078, and T307) to map the interseismic

Optimal fault signal estimation

NARCIS (Netherlands)

Stoorvogel, Antonie Arij; Niemann, H.H.; Saberi, A.; Sannuti, P.

2002-01-01

We consider here both fault identification and fault signal estimation. Regarding fault identification, we seek either exact or almost fault identification. On the other hand, regarding fault signal estimation, we seek either $H_2$ optimal, $H_2$ suboptimal or Hinfinity suboptimal estimation. By

Faulting at Mormon Point, Death Valley, California: A low-angle normal fault cut by high-angle faults

Science.gov (United States)

Keener, Charles; Serpa, Laura; Pavlis, Terry L.

1993-04-01

New geophysical and fault kinematic studies indicate that late Cenozoic basin development in the Mormon Point area of Death Valley, California, was accommodated by fault rotations. Three of six fault segments recognized at Mormon Point are now inactive and have been rotated to low dips during extension. The remaining three segments are now active and moderately to steeply dipping. From the geophysical data, one active segment appears to offset the low-angle faults in the subsurface of Death Valley.

Wind energy status in renewable electrical energy production in Turkey

International Nuclear Information System (INIS)

Kaygusuz, Kamil

2010-01-01

Main electrical energy sources of Turkey are thermal and hydraulic. Most of the thermal sources are derived from natural gas. Turkey imports natural gas; therefore, decreasing usage of natural gas is very important for both economical and environmental aspects. Because of disadvantages of fossil fuels, renewable energy sources are getting importance for sustainable energy development and environmental protection. Among the renewable sources, Turkey has very high wind energy potential. The estimated wind power capacity of Turkey is about 83,000 MW while only 10,000 MW of it seems to be economically feasible to use. Start 2009, the total installed wind power capacity of Turkey was only 4.3% of its total economical wind power potential (433 MW). However, the strong development of wind energy in Turkey is expected to continue in the coming years. In this study, Turkey's installed electric power capacity, electric energy production is investigated and also Turkey current wind energy status is examined. (author)

Real-time fault diagnosis and fault-tolerant control

OpenAIRE

Gao, Zhiwei; Ding, Steven X.; Cecati, Carlo

2015-01-01

This "Special Section on Real-Time Fault Diagnosis and Fault-Tolerant Control" of the IEEE Transactions on Industrial Electronics is motivated to provide a forum for academic and industrial communities to report recent theoretic/application results in real-time monitoring, diagnosis, and fault-tolerant design, and exchange the ideas about the emerging research direction in this field. Twenty-three papers were eventually selected through a strict peer-reviewed procedure, which represent the mo...

Fault kinematics and localised inversion within the Troms-Finnmark Fault Complex, SW Barents Sea

Science.gov (United States)

Zervas, I.; Omosanya, K. O.; Lippard, S. J.; Johansen, S. E.

2018-04-01

The areas bounding the Troms-Finnmark Fault Complex are affected by complex tectonic evolution. In this work, the history of fault growth, reactivation, and inversion of major faults in the Troms-Finnmark Fault Complex and the Ringvassøy Loppa Fault Complex is interpreted from three-dimensional seismic data, structural maps and fault displacement plots. Our results reveal eight normal faults bounding rotated fault blocks in the Troms-Finnmark Fault Complex. Both the throw-depth and displacement-distance plots show that the faults exhibit complex configurations of lateral and vertical segmentation with varied profiles. Some of the faults were reactivated by dip-linkages during the Late Jurassic and exhibit polycyclic fault growth, including radial, syn-sedimentary, and hybrid propagation. Localised positive inversion is the main mechanism of fault reactivation occurring at the Troms-Finnmark Fault Complex. The observed structural styles include folds associated with extensional faults, folded growth wedges and inverted depocentres. Localised inversion was intermittent with rifting during the Middle Jurassic-Early Cretaceous at the boundaries of the Troms-Finnmark Fault Complex to the Finnmark Platform. Additionally, tectonic inversion was more intense at the boundaries of the two fault complexes, affecting Middle Triassic to Early Cretaceous strata. Our study shows that localised folding is either a product of compressional forces or of lateral movements in the Troms-Finnmark Fault Complex. Regional stresses due to the uplift in the Loppa High and halokinesis in the Tromsø Basin are likely additional causes of inversion in the Troms-Finnmark Fault Complex.

Detection of antibodies against Turkey astrovirus in humans.

Science.gov (United States)

Meliopoulos, Victoria A; Kayali, Ghazi; Burnham, Andrew; Oshansky, Christine M; Thomas, Paul G; Gray, Gregory C; Beck, Melinda A; Schultz-Cherry, Stacey

2014-01-01

Astroviruses are a leading cause of gastroenteritis in mammals and birds worldwide. Although historically thought to be species-specific, increasing evidence suggests that astroviruses may cross species barriers. In this report, we used enzyme-linked immunosorbent assays to screen sera from three distinct human cohorts involved in influenza studies in Memphis, TN or Chapel Hill, NC, and Midwestern poultry abattoir workers for antibodies to turkey astrovirus type 2 (TAstV-2). Surprisingly, 26% of one cohort's population was TAstV-2 positive as compared to 0 and 8.9% in the other cohorts. This cohort was composed of people with exposure to turkeys in the Midwestern United States including abattoir workers, turkey growers, and non-occupationally exposed participants. The odds of testing positive for antibodies against turkey astrovirus among abattoir workers were approximately 3 times higher than the other groups. These studies suggest that people with contact to turkeys can develop serological responses to turkey astrovirus. Further work is needed to determine if these exposures result in virus replication and/or clinical disease.

Detection of antibodies against Turkey astrovirus in humans.

Directory of Open Access Journals (Sweden)

Victoria A Meliopoulos

Full Text Available Astroviruses are a leading cause of gastroenteritis in mammals and birds worldwide. Although historically thought to be species-specific, increasing evidence suggests that astroviruses may cross species barriers. In this report, we used enzyme-linked immunosorbent assays to screen sera from three distinct human cohorts involved in influenza studies in Memphis, TN or Chapel Hill, NC, and Midwestern poultry abattoir workers for antibodies to turkey astrovirus type 2 (TAstV-2. Surprisingly, 26% of one cohort's population was TAstV-2 positive as compared to 0 and 8.9% in the other cohorts. This cohort was composed of people with exposure to turkeys in the Midwestern United States including abattoir workers, turkey growers, and non-occupationally exposed participants. The odds of testing positive for antibodies against turkey astrovirus among abattoir workers were approximately 3 times higher than the other groups. These studies suggest that people with contact to turkeys can develop serological responses to turkey astrovirus. Further work is needed to determine if these exposures result in virus replication and/or clinical disease.

Energy policies of IEA countries: Turkey 1997 review

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

This IEA report provides a comprehensive in-depth assessment of the energy policies of Turkey, including recommendations on future policy developments. The report highlights the rapid increase in Turkey`s energy consumption and the large investments needed to meet the demand growth. Turkey has sought to attract private inward investment in the energy sector, in particular in electricity, through build-own-operate and build-operate-transfer schemes and transfers of operating rights. Turkey needs to set up a stable legal framework to continue this policy. It needs to push forward with market reforms, as well as to create a level playing field for competition, with energy prices reflecting the true costs of various fuels. Natural gas consumption is also expected to continue to increase. The new regulatory framework should be designed to encourage more rapid increase in the use of gas and more corresponding investments. Turkey is situated near the Caspian Sea, where natural gas and oil production are expected to increase substantially. The report describes projects for oil and natural gas pipelines. 33 figs., 31 tabs., 4 apps.

Overview of Turkey's coal necessity, reserves and utilization

Energy Technology Data Exchange (ETDEWEB)

Kilic, Ahmet Mahmut; Kilic, Ozen

2006-10-15

This article deals with overview of Turkey's coal necessity, reserves and utilization. Turkey is rapidly growing in terms of both its economy and its population. In parallel, its demand for energy, particularly for electricity, is increasing. Turkey possesses fossil fuel resources of hard coal (HC) and lignite (LG) have the greatest importance in energy production and for the national economy. The hard coal and lignite reserves of Turkey are 1.126 and 8.375 millions tons(Mt), respectively. Coal, the major fuel source for Turkey utilized mainly for electric power, steel manufacturing and cement production, amounts to 31% of total energy consumption in Turkey. To sum up, providing the total consumption is taken into account in the Middle East, the coal consumption rate of Turkey is approximately 90% of the consumption in this region.

Oil and gas market developments in Turkey

International Nuclear Information System (INIS)

Kaygusuz, K.

2003-01-01

Turkey's strategic location makes it a natural 'energy bridge' between major oil and gas producing areas in the Middle East and Caspian Sea regions on one hand and consumer markets in Europe on the other. Oil consumption has increased in recent years in Turkey, and this trend is expected to continue, with growth of 2-3% annually in coming years. The annual oil consumption of the country is around 31.3 million tons, while 83% of total consumption is supplied from imports and only 17% is supplied from indigenous production. Oil provides around 43% of Turkey's total energy requirements, but its share is declining (as the share of natural gas rises). On the other hand, due to diversification efforts of energy sources, use of natural gas was newly introduced into the Turkish economy in 1987 and has been growing rapidly. Turkey's natural gas reserves seem limited and current gas production in the country meets 2.8% of domestic consumption requirements. The annual natural gas consumption of Turkey is around 14.7 billion m 3 and is assumed to increase by 12% per annum. Turkish natural gas use is projected to increase dramatically in coming years, with the prime consumers expected to be industry and power plants. Turkey has chosen natural gas as the preferred fuel for the massive amount of new power plant capacity to be added in coming years. (Author)

A snapshot of geothermal energy potential and utilization in Turkey

International Nuclear Information System (INIS)

Erdogdu, Erkan

2009-01-01

Turkey is one of the countries with significant potential in geothermal energy. It is estimated that if Turkey utilizes all of her geothermal potential, she can meet 14% of her total energy need (heat and electricity) from geothermal sources. Therefore, today geothermal energy is an attractive option in Turkey to replace fossil fuels. Besides, increase in negative effects of fossil fuels on the environment has forced many countries, including Turkey, to use renewable energy sources. Also, Turkey is an energy importing country; more than two-thirds of her energy requirement is supplied by imports. In this context, geothermal energy appears to be one of the most efficient and effective solutions for sustainable energy development and environmental pollution prevention in Turkey. Since geothermal energy will be used more and more in the future, its current potential, usage, and assessment in Turkey is the focus of the present study. The paper not only presents a review of the potential and utilization of the geothermal energy in Turkey but also provides some guidelines for policy makers. (author)

Design of fault simulator

Energy Technology Data Exchange (ETDEWEB)

Gabbar, Hossam A. [Faculty of Energy Systems and Nuclear Science, University of Ontario Institute of Technology (UOIT), Ontario, L1H 7K4 (Canada)], E-mail: hossam.gabbar@uoit.ca; Sayed, Hanaa E.; Osunleke, Ajiboye S. [Okayama University, Graduate School of Natural Science and Technology, Division of Industrial Innovation Sciences Department of Intelligent Systems Engineering, Okayama 700-8530 (Japan); Masanobu, Hara [AspenTech Japan Co., Ltd., Kojimachi Crystal City 10F, Kojimachi, Chiyoda-ku, Tokyo 102-0083 (Japan)

2009-08-15

Fault simulator is proposed to understand and evaluate all possible fault propagation scenarios, which is an essential part of safety design and operation design and support of chemical/production processes. Process models are constructed and integrated with fault models, which are formulated in qualitative manner using fault semantic networks (FSN). Trend analysis techniques are used to map real time and simulation quantitative data into qualitative fault models for better decision support and tuning of FSN. The design of the proposed fault simulator is described and applied on experimental plant (G-Plant) to diagnose several fault scenarios. The proposed fault simulator will enable industrial plants to specify and validate safety requirements as part of safety system design as well as to support recovery and shutdown operation and disaster management.

Mycoplasma gallopavonis in eastern wild turkeys.

Science.gov (United States)

Luttrell, M P; Eleazer, T H; Kleven, S H

1992-04-01

Serum samples and tracheal cultures were collected from eastern wild turkeys (Meleagris gallopavo sylvestris) trapped for relocation in South Carolina (USA) during 1985 to 1990. Sera were tested for Mycoplasma gallisepticum and M. synoviae by the rapid plate agglutination and hemagglutination inhibition tests and were found to be negative. Tracheal cultures were negative for all pathogenic Mycoplasma spp., including M. gallisepticum, M. synoviae, M. meleagridis, and M. iowae. However, M. gallopavonis was isolated from every group of wild turkeys tested in 1986 to 1990. These data suggest that M. gallopavonis, which is generally considered nonpathogenic, may be a common microorganism in eastern wild turkeys.

The “Soft Power” policy of Turkey towards Georgia

Directory of Open Access Journals (Sweden)

Larisa Mgerovna Aleksanyan

2016-01-01

Full Text Available South Caucasus throughout history was at the epicenter of clashes of different religions, civilizations, nations and states. At present moment the interests of both regional (Turkey, Iran and global actors (the United States, NATO, the EU, Russia and others. intersect in the region. Global transformations, changing power relations in international relations have their direct influence on the political processes taking place in the region. These processes are also linked with the activities of Turkey, which aspire to regional leadership. It is Georgia, which serves as a corridor between Turkey and states of Central Asia and the South Caucasus. Turkey spreads its influence in Georgia in almost all areas using economic, military and political tools, as well as the Russian-Georgian deteriorated relations. To achieve its goals, Turkey is actively pursuing a strategy of "soft power", which further strengthens its influence in the country. Public diplomacy is a part of soft power, which also ensures the formation of a positive and attractive image of Turkey in Georgia. This article investigates the contemporary policy of "soft power" of Turkey towards Georgia. It analyses the basic tools, institutions and the direction of this policy, actively implemented by the Republic of Turkey. Particular attention is paid to the activities of the Gulen Movement in Georgia. The author makes general conclusions regarding the effectiveness of this policy.

Fault Management Metrics

Science.gov (United States)

Johnson, Stephen B.; Ghoshal, Sudipto; Haste, Deepak; Moore, Craig

2017-01-01

This paper describes the theory and considerations in the application of metrics to measure the effectiveness of fault management. Fault management refers here to the operational aspect of system health management, and as such is considered as a meta-control loop that operates to preserve or maximize the system's ability to achieve its goals in the face of current or prospective failure. As a suite of control loops, the metrics to estimate and measure the effectiveness of fault management are similar to those of classical control loops in being divided into two major classes: state estimation, and state control. State estimation metrics can be classified into lower-level subdivisions for detection coverage, detection effectiveness, fault isolation and fault identification (diagnostics), and failure prognosis. State control metrics can be classified into response determination effectiveness and response effectiveness. These metrics are applied to each and every fault management control loop in the system, for each failure to which they apply, and probabilistically summed to determine the effectiveness of these fault management control loops to preserve the relevant system goals that they are intended to protect.

Study on seismic hazard assessment of large active fault systems. Evolution of fault systems and associated geomorphic structures: fault model test and field survey

International Nuclear Information System (INIS)

Ueta, Keichi; Inoue, Daiei; Miyakoshi, Katsuyoshi; Miyagawa, Kimio; Miura, Daisuke

2003-01-01

Sandbox experiments and field surveys were performed to investigate fault system evolution and fault-related deformation of ground surface, the Quaternary deposits and rocks. The summary of the results is shown below. 1) In the case of strike-slip faulting, the basic fault sequence runs from early en echelon faults and pressure ridges through linear trough. The fault systems associated with the 2000 western Tottori earthquake are shown as en echelon pattern that characterize the early stage of wrench tectonics, therefore no thoroughgoing surface faulting was found above the rupture as defined by the main shock and aftershocks. 2) Low-angle and high-angle reverse faults commonly migrate basinward with time, respectively. With increasing normal fault displacement in bedrock, normal fault develops within range after reverse fault has formed along range front. 3) Horizontal distance of surface rupture from the bedrock fault normalized by the height of the Quaternary deposits agrees well with those of model tests. 4) Upward-widening damage zone, where secondary fractures develop, forms in the handing wall side of high-angle reverse fault at the Kamioka mine. (author)

LGBT in Turkey: Policies and Experiences

Directory of Open Access Journals (Sweden)

Ceylan Engin

2015-09-01

Full Text Available While LGBT studies have been problematizing normative categories of sexuality primarily in Western cultures, the status of lesbian, gay, bisexual, and transgender (LGBT individuals in non-Western societies remains understudied. This study examines the political attitudes toward LGBT individuals in Turkish society and explores the experiences of transgender individuals. While Turkey holds a strong economic position among Western countries, the situation of sexual minorities lags behind international standards. This study explores two research questions. First, what is the Turkish government’s outlook for the LGBT community? Secondly, what kind of problems and challenges do trans-individuals experience in Turkey? This study first introduces a macro-level analysis of the politics of gender identity in Turkey by analyzing the debates of four deputies in the Turkish Parliament, each representing their parties’ disparate viewpoints. Secondly, a micro-level analysis of previously collected interviews with twenty-five trans-individuals are also examined that shed light on the difficulties of being a trans-individual in Turkey. The content analysis shows that trans-individuals experience physical, sexual, and emotional violence, in addition to experiencing discrimination in employment, housing, and healthcare. The findings of this micro-level analysis elucidate the continuous discrimination, inequality, and violence that these individuals experience, while the macro-level analysis portrays the state’s discriminatory policies toward LGBT individuals in Turkey.

Evaluation of ground deformations induced by the 1999 Kocaeli earthquake (Turkey) at selected sites on shorelines

Science.gov (United States)

Aydan, Ömer; Ulusay, Reşat; Atak, Veysel Okan

2008-03-01

The Kocaeli earthquake ( M w = 7.4) of 17 August 1999 occurred in the Eastern Marmara Region of Turkey along the North Anadolu Fault and resulted in a very serious loss of life and property. One of the most important geotechnical issues of this event was the permanent ground deformations because of both liquefaction and faulting. These deformations occurred particularly along the southern shores of İzmit Bay and Sapanca Lake between the cities of Yalova and Adapazarı in the west and east, respectively. In this study, three sites founded on delta fans, namely Değirmendere Nose, Yeniköy tea garden at Seymen on the coast of İzmit Bay, and Vakıf Hotel site on the coast of Sapanca Lake were selected as typical cases. The main causes of the ground deformations at these sites were then investigated. Geotechnical characterization of the ground, derivation of displacement vectors from the pre- and post-earthquake aerial photographs, liquefaction assessments based on field performance data, and analyses carried out using the sliding body method have been fundamental in this study. The displacement vectors determined from photogrammetric evaluations conducted at Değirmendere and Seymen showed a combined movement of faulting and liquefaction. But except the movements in the close vicinity of shorelines, the dominant factor in this movement was faulting. The results obtained from the analyses suggested that the ground failure at Değirmendere was a submarine landslide mainly because of earthquake shaking rather than liquefaction. On the other hand, the ground failures at the Yeniköy tea garden on the coast of Seymen and the hotel area in Sapanca town resulted from liquefaction-induced lateral spreading. It was also obtained that the ground deformations estimated from the sliding body method were quite close to those measured by aerial photogrammetry technique.

Eigenvector of gravity gradient tensor for estimating fault dips considering fault type

Science.gov (United States)

Kusumoto, Shigekazu

2017-12-01

The dips of boundaries in faults and caldera walls play an important role in understanding their formation mechanisms. The fault dip is a particularly important parameter in numerical simulations for hazard map creation as the fault dip affects estimations of the area of disaster occurrence. In this study, I introduce a technique for estimating the fault dip using the eigenvector of the observed or calculated gravity gradient tensor on a profile and investigating its properties through numerical simulations. From numerical simulations, it was found that the maximum eigenvector of the tensor points to the high-density causative body, and the dip of the maximum eigenvector closely follows the dip of the normal fault. It was also found that the minimum eigenvector of the tensor points to the low-density causative body and that the dip of the minimum eigenvector closely follows the dip of the reverse fault. It was shown that the eigenvector of the gravity gradient tensor for estimating fault dips is determined by fault type. As an application of this technique, I estimated the dip of the Kurehayama Fault located in Toyama, Japan, and obtained a result that corresponded to conventional fault dip estimations by geology and geomorphology. Because the gravity gradient tensor is required for this analysis, I present a technique that estimates the gravity gradient tensor from the gravity anomaly on a profile.

Reverse fault growth and fault interaction with frictional interfaces: insights from analogue models

Science.gov (United States)

Bonanno, Emanuele; Bonini, Lorenzo; Basili, Roberto; Toscani, Giovanni; Seno, Silvio

2017-04-01

The association of faulting and folding is a common feature in mountain chains, fold-and-thrust belts, and accretionary wedges. Kinematic models are developed and widely used to explain a range of relationships between faulting and folding. However, these models may result not to be completely appropriate to explain shortening in mechanically heterogeneous rock bodies. Weak layers, bedding surfaces, or pre-existing faults placed ahead of a propagating fault tip may influence the fault propagation rate itself and the associated fold shape. In this work, we employed clay analogue models to investigate how mechanical discontinuities affect the propagation rate and the associated fold shape during the growth of reverse master faults. The simulated master faults dip at 30° and 45°, recalling the range of the most frequent dip angles for active reverse faults that occurs in nature. The mechanical discontinuities are simulated by pre-cutting the clay pack. For both experimental setups (30° and 45° dipping faults) we analyzed three different configurations: 1) isotropic, i.e. without precuts; 2) with one precut in the middle of the clay pack; and 3) with two evenly-spaced precuts. To test the repeatability of the processes and to have a statistically valid dataset we replicate each configuration three times. The experiments were monitored by collecting successive snapshots with a high-resolution camera pointing at the side of the model. The pictures were then processed using the Digital Image Correlation method (D.I.C.), in order to extract the displacement and shear-rate fields. These two quantities effectively show both the on-fault and off-fault deformation, indicating the activity along the newly-formed faults and whether and at what stage the discontinuities (precuts) are reactivated. To study the fault propagation and fold shape variability we marked the position of the fault tips and the fold profiles for every successive step of deformation. Then we compared

Fault Current Characteristics of the DFIG under Asymmetrical Fault Conditions

Directory of Open Access Journals (Sweden)

Fan Xiao

2015-09-01

Full Text Available During non-severe fault conditions, crowbar protection is not activated and the rotor windings of a doubly-fed induction generator (DFIG are excited by the AC/DC/AC converter. Meanwhile, under asymmetrical fault conditions, the electrical variables oscillate at twice the grid frequency in synchronous dq frame. In the engineering practice, notch filters are usually used to extract the positive and negative sequence components. In these cases, the dynamic response of a rotor-side converter (RSC and the notch filters have a large influence on the fault current characteristics of the DFIG. In this paper, the influence of the notch filters on the proportional integral (PI parameters is discussed and the simplified calculation models of the rotor current are established. Then, the dynamic performance of the stator flux linkage under asymmetrical fault conditions is also analyzed. Based on this, the fault characteristics of the stator current under asymmetrical fault conditions are studied and the corresponding analytical expressions of the stator fault current are obtained. Finally, digital simulation results validate the analytical results. The research results are helpful to meet the requirements of a practical short-circuit calculation and the construction of a relaying protection system for the power grid with penetration of DFIGs.

Rights of the Child in Turkey.

Science.gov (United States)

Naqvi, Yasmin

This report to the United Nations Convention on the Rights of the Child contains observations of the World Organisation Against Torture (OMCT) concerning the application of the Convention by Turkey and observations regarding violence against girls in Turkey. The report is presented in three major parts. Part 1 asserts that despite the considerable…

Scissoring Fault Rupture Properties along the Median Tectonic Line Fault Zone, Southwest Japan

Science.gov (United States)

Ikeda, M.; Nishizaka, N.; Onishi, K.; Sakamoto, J.; Takahashi, K.

2017-12-01

The Median Tectonic Line fault zone (hereinafter MTLFZ) is the longest and most active fault zone in Japan. The MTLFZ is a 400-km-long trench parallel right-lateral strike-slip fault accommodating lateral slip components of the Philippine Sea plate oblique subduction beneath the Eurasian plate [Fitch, 1972; Yeats, 1996]. Complex fault geometry evolves along the MTLFZ. The geomorphic and geological characteristics show a remarkable change through the MTLFZ. Extensional step-overs and pull-apart basins and a pop-up structure develop in western and eastern parts of the MTLFZ, respectively. It is like a "scissoring fault properties". We can point out two main factors to form scissoring fault properties along the MTLFZ. One is a regional stress condition, and another is a preexisting fault. The direction of σ1 anticlockwise rotate from N170°E [Famin et al., 2014] in the eastern Shikoku to Kinki areas and N100°E [Research Group for Crustral Stress in Western Japan, 1980] in central Shikoku to N85°E [Onishi et al., 2016] in western Shikoku. According to the rotation of principal stress directions, the western and eastern parts of the MTLFZ are to be a transtension and compression regime, respectively. The MTLFZ formed as a terrain boundary at Cretaceous, and has evolved with a long active history. The fault style has changed variously, such as left-lateral, thrust, normal and right-lateral. Under the structural condition of a preexisting fault being, the rupture does not completely conform to Anderson's theory for a newly formed fault, as the theory would require either purely dip-slip motion on the 45° dipping fault or strike-slip motion on a vertical fault. The fault rupture of the 2013 Barochistan earthquake in Pakistan is a rare example of large strike-slip reactivation on a relatively low angle dipping fault (thrust fault), though many strike-slip faults have vertical plane generally [Avouac et al., 2014]. In this presentation, we, firstly, show deep subsurface

Turkey's response to threats of weapons of mass destruction

OpenAIRE

Al, Guray.

2001-01-01

Unlike most of its NATO allies, Turkey did not emerge from the Cold War with enhanced security. The acquisition of weapons of mass destruction (WMD) and ballistic missiles by its neighbors in the Middle Eastâ Iran, Iraq and Syriaâ creates a serious security concern for Turkey. This thesis analyzes the numerous threats posed to Turkey by its neighborsα nuclear, chemical and biological weapons programs and their ballistic missiles. It evaluates Turkeyαs defense options to counter these thre...

Recent incentives for renewable energy in Turkey

International Nuclear Information System (INIS)

Simsek, Hayal Ayca; Simsek, Nevzat

2013-01-01

Recently, the importance of renewable energy sources has increased significantly as climate change has become an important long term threat to global ecosystems and the world economy. In the face of increased concern about climate change and high fossil fuel costs together with a reduction in the primary energy sources such as oil, natural gas and coal, alternative energy sources (renewables) are increasingly needed to respond to the threat of climate change and growing energy demand in the world. Recent developments in Turkey, such as the liberalization of the electricity market and improvements in the renewable legislations, have accelerated the growth process and investment opportunities in the field of renewable energy. Turkey′s naturally endowed potential for renewables, such as solar, geothermal and wind, also accompanied these developments and attracted world attention to this market. In Turkey, renewable energy sources have gained great importance in the last decades due to growing energy demand and incentive policies which foster the utilization of renewable energy sources. This study aims to explore the availability and potential of renewable energy sources in Turkey and discuss the government policies and economic aspects. - highlights: • Turkey′s potential for renewable energy has attracted world attention. • Turkey has specific energy objectives in promoting renewable energy. • This paper evaluates recent incentives for renewable energy in Turkey. • Incentives in Turkey have led to more investment in renewable energy generation

Employment impacts of solar energy in Turkey

International Nuclear Information System (INIS)

Cetin, Muejgan; Egrican, Niluefer

2011-01-01

Solar energy is considered a key source for the future, not only for Turkey, also for all of the world. Therefore the development and usage of solar energy technologies are increasingly becoming vital for sustainable economic development. The main objective of this study is investigating the employment effects of solar energy industry in Turkey. Some independent reports and studies, which analyze the economic and employment impacts of solar energy industry in the world have been reviewed. A wide range of methods have been used in those studies in order to calculate and to predict the employment effects. Using the capacity targets of the photovoltaic (PV) and concentrated solar power (CSP) plants in the solar Roadmap of Turkey, the prediction of the direct and indirect employment impacts to Turkey's economy is possible. As a result, solar energy in Turkey would be the primary source of energy demand and would have a big employment effects on the economics. That can only be achieved with the support of governmental feed-in tariff policies of solar energy and by increasing research-development funds. - Highlights: → The objective of the study, is investigating employment effects of solar energy. → Using the capacity targets of the PV and CSP plants in solar roadmap of Turkey. → Direct employment has been calculated by constructing of the solar power plant. → If multiplier effect is accepted as 2, total employment will be doubled. → Validity of the figures depends on the government's policies.

Market Brief : Turkey oil and gas pipelines

International Nuclear Information System (INIS)

2001-08-01

This report presented some quick facts about oil and gas pipelines in Turkey and presented opportunities for trade. The key players and customers in the oil and gas sector were described along with an export check list. Turkey is looking into becoming an energy bridge between oil and gas producing countries in the Middle East, Central Asia and Europe. The oil and gas sectors are dominated by the Turkish Petroleum Corporation, a public enterprise dealing with exploration and production, and the State Pipeline Corporation which deals with energy transmission. They are also the key buyers of oil and gas equipment in Turkey. There are several pipelines connecting countries bordering the Caspian Sea. Opportunities exist in the areas of engineering consulting as well as contracting services for oil and gas pipeline transmission and distribution. Other opportunities lie in the area of pipeline construction, rehabilitation, materials, equipment, installation, and supervisory control and data acquisition (SCADA) systems. Currently, the major players are suppliers from Italy, Germany, France, United States and Japan. Turkey has no trade barriers and imported equipment and materials are not subjected to any restriction. The oil and gas market in Turkey expected in increase by an average annual growth rate of 15 per cent from 2001 to 2003. A brief description of pipeline projects in Turkey was presented in this report along with a list of key contacts and support services. 25 refs., 1 append

Soft-Sediment Deformation Structures Interpreted as Seismites in the Kolankaya Formation, Denizli Basin (SW Turkey)

Science.gov (United States)

Topal, Savaş; Özkul, Mehmet

2014-01-01

The NW-trending Denizli basin of the SW Turkey is one of the neotectonic grabens in the Aegean extensional province. It is bounded by normal faults on both southern and northern margins. The basin is filled by Neogene and Quaternary terrestrial deposits. Late Miocene- Late Pliocene aged Kolankaya formation crops out along the NW trending Karakova uplift in the Denizli basin. It is a typical fluviolacustrine succession that thickens and coarsens upward, comprising poorly consolidated sand, gravelly sand, siltstone and marl. Various soft-sediment deformation structures occur in the formation, especially in fine- to medium grained sands, silts and marls: load structures, flame structures, clastic dikes (sand and gravely-sand dike), disturbed layers, laminated convolute beds, slumps and synsedimentary faulting. The deformation mechanism and driving force for the soft-sediment deformation are related essentially to gravitational instability, dewatering, liquefaction-liquidization, and brittle deformation. Field data and the wide lateral extent of the structures as well as regional geological data show that most of the deformation is related to seismicity and the structures are interpreted as seismites. The existence of seismites in the Kolankaya Formation is evidence for continuing tectonic activity in the study area during the Neogene and is consistent with the occurrence of the paleoearthquakes of magnitude >5. PMID:25152909

An Active Fault-Tolerant Control Method Ofunmanned Underwater Vehicles with Continuous and Uncertain Faults

Directory of Open Access Journals (Sweden)

Daqi Zhu

2008-11-01

Full Text Available This paper introduces a novel thruster fault diagnosis and accommodation system for open-frame underwater vehicles with abrupt faults. The proposed system consists of two subsystems: a fault diagnosis subsystem and a fault accommodation sub-system. In the fault diagnosis subsystem a ICMAC(Improved Credit Assignment Cerebellar Model Articulation Controllers neural network is used to realize the on-line fault identification and the weighting matrix computation. The fault accommodation subsystem uses a control algorithm based on weighted pseudo-inverse to find the solution of the control allocation problem. To illustrate the proposed method effective, simulation example, under multi-uncertain abrupt faults, is given in the paper.

U.S.-Turkey Strategic Dialogue

OpenAIRE

Center on Contemporary Conflict

2012-01-01

FY 2012-2013. Project Leads: Clement, Victoria and Gingeras, Ryan The primary objectives of this effort are twofold: to better understand and identify solutions to the current and potential challenges to U.S. national security interests in the Middle East, and to enhance understanding of and cooperation with Turkey through a Track II dialogue. The dialogue will provide policymakers with accessible intelligence, informed by on the ground discussions with relevant stakeholders in Turkey. NA

78 FR 55095 - Certain Pasta From Italy and Turkey

Science.gov (United States)

2013-09-09

...)] Certain Pasta From Italy and Turkey Determinations On the basis of the record \\1\\ developed in the subject... countervailing and antidumping duty orders on certain pasta from Italy and Turkey would be likely to lead to... respect to imports of certain pasta from Turkey. Background The Commission instituted these reviews on...

Remedies for moral damage before the European Court of Human Rights: Cyprus v. Turkey case

Directory of Open Access Journals (Sweden)

Đajić Sanja

2014-01-01

Full Text Available This article provides the overview of the Cyprus v. Turkey judgment, a recently decided case before the Grand Chamber of the European Court for Human Rights. This is the first inter-State case which ended with pecuniary judgment for moral damages. The article begins with the overview of factual and legal issues in the Cyprus v. Turkey case which is followed by contextualizing this judgment within the general legal framework regarding moral damages and remedies available. The second part provides the insight into the case law of the International Court of Justice, European Court for Human Rights and international investment arbitration in order to assess the status of moral damages under general international law. While all international courts and tribunals recognize moral damage as a cause of action, they seem to respond differently to the issue of remedies. International Court of Justice seems to favour declaratory over pecuniary judgments; European Court of Human Rights tend to award both non-pecuniary and pecuniary remedies for moral damages; international investment tribunals seem to favour pecuniary remedies for moral damages. A separate issue is whether international law permits or rather proscribes punitive damages. While the ILC finds that general international law does not allow for punitive damages there are different opinions, at least within the ECHR setting, that moral damages are inherently punitive for fault-based conduct of the responsible state.

Information Based Fault Diagnosis

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Poulsen, Niels Kjølstad

2008-01-01

Fault detection and isolation, (FDI) of parametric faults in dynamic systems will be considered in this paper. An active fault diagnosis (AFD) approach is applied. The fault diagnosis will be investigated with respect to different information levels from the external inputs to the systems. These ...

Demographic Factors Affecting Internet Using Purposes of High School Students

OpenAIRE

Abdullah Faruk Kılıç; Cem Oktay Güzeller

2017-01-01

This study aimed at determining the impact of demographic factors on the Internet usage purposes of high school students. The population of the study consisted of students between 9th and 12th grades from the Anatolian high schools, science high schools, social sciences high schools, sports high schools and fine arts high schools in Turkey. The sample was chosen through the stratified and cluster sampling procedure. The students were chosen randomly depending on the regions of their school at...

Fault Tolerant Feedback Control

DEFF Research Database (Denmark)

Stoustrup, Jakob; Niemann, H.

2001-01-01

An architecture for fault tolerant feedback controllers based on the Youla parameterization is suggested. It is shown that the Youla parameterization will give a residual vector directly in connection with the fault diagnosis part of the fault tolerant feedback controller. It turns out...... that there is a separation be-tween the feedback controller and the fault tolerant part. The closed loop feedback properties are handled by the nominal feedback controller and the fault tolerant part is handled by the design of the Youla parameter. The design of the fault tolerant part will not affect the design...... of the nominal feedback con-troller....

Data-driven design of fault diagnosis and fault-tolerant control systems

CERN Document Server

Ding, Steven X

2014-01-01

Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems presents basic statistical process monitoring, fault diagnosis, and control methods, and introduces advanced data-driven schemes for the design of fault diagnosis and fault-tolerant control systems catering to the needs of dynamic industrial processes. With ever increasing demands for reliability, availability and safety in technical processes and assets, process monitoring and fault-tolerance have become important issues surrounding the design of automatic control systems. This text shows the reader how, thanks to the rapid development of information technology, key techniques of data-driven and statistical process monitoring and control can now become widely used in industrial practice to address these issues. To allow for self-contained study and facilitate implementation in real applications, important mathematical and control theoretical knowledge and tools are included in this book. Major schemes are presented in algorithm form and...

Distributed Fault-Tolerant Control of Networked Uncertain Euler-Lagrange Systems Under Actuator Faults.

Science.gov (United States)

Chen, Gang; Song, Yongduan; Lewis, Frank L

2016-05-03

This paper investigates the distributed fault-tolerant control problem of networked Euler-Lagrange systems with actuator and communication link faults. An adaptive fault-tolerant cooperative control scheme is proposed to achieve the coordinated tracking control of networked uncertain Lagrange systems on a general directed communication topology, which contains a spanning tree with the root node being the active target system. The proposed algorithm is capable of compensating for the actuator bias fault, the partial loss of effectiveness actuation fault, the communication link fault, the model uncertainty, and the external disturbance simultaneously. The control scheme does not use any fault detection and isolation mechanism to detect, separate, and identify the actuator faults online, which largely reduces the online computation and expedites the responsiveness of the controller. To validate the effectiveness of the proposed method, a test-bed of multiple robot-arm cooperative control system is developed for real-time verification. Experiments on the networked robot-arms are conduced and the results confirm the benefits and the effectiveness of the proposed distributed fault-tolerant control algorithms.

Mobility in Turkey. Electric Vehicles

Energy Technology Data Exchange (ETDEWEB)

Yazgan, M. [Embassy of the Kingdom of the Netherlands, Turan Gunes Bulvari, Hollanda Caddesi, No.5,06550 Yildiz-Ankara (Turkey)

2013-01-15

The purpose of this report is to provide information about electric vehicles (EVs) and e-mobility as an emerging market in Turkey. EVs receive attention from the Turkish government for a number of reasons: Turkey has a strong automotive industry and needs to follow the technological developments taking place regarding intelligent vehicles and intelligent transport systems, as well as electric transportation technologies. Secondly, a considerable amount of carbon emissions from motor vehicles is of great concern in relation to climate change. EVs might be an alternative which can break the dependence of Turkey on imported fuel that has a negative influence on its current account deficit (CAD). On top of these factors, the Prime Minister of Turkey has a desire to have a 'Local Brand Vehicle' before the 100th year of the establishment of the Republic in 2023 and preferably an 'EV'. EVs are included in the strategy documents and action plans of almost all ministries and public institutions. Among all ministries, the Ministry of Science, Industry and Technology (MoSI and T) takes a leading position. It holds bi-annual meetings with stakeholders to monitor and evaluate progress about the level of actualization of the identified policies on e-mobility. MoSI and T's related institution of the Scientific and Technological Research Council of Turkey (TUBITAK) co-ordinates the R and D activities and provides generous R and D incentives. EVs have been put on sale in Turkey in 2012 and are still very limited in number. Public institutions are taking the lead by converting their vehicle fleet to EVs. EVs are also more suitable for businesses/ duties with a fixed/short route; therefore it is expected that the growth of the sector will mainly come from the vehicle fleet of the public organisations and institutions, followed by the private vehicle fleet of companies, e.g. freight companies. Although there are some on-going test drives, it is not yet proven

Fault-tolerant Control of Unmanned Underwater Vehicles with Continuous Faults: Simulations and Experiments

Directory of Open Access Journals (Sweden)

Qian Liu

2010-02-01

Full Text Available A novel thruster fault diagnosis and accommodation method for open-frame underwater vehicles is presented in the paper. The proposed system consists of two units: a fault diagnosis unit and a fault accommodation unit. In the fault diagnosis unit an ICMAC (Improved Credit Assignment Cerebellar Model Articulation Controllers neural network information fusion model is used to realize the fault identification of the thruster. The fault accommodation unit is based on direct calculations of moment and the result of fault identification is used to find the solution of the control allocation problem. The approach resolves the continuous faulty identification of the UV. Results from the experiment are provided to illustrate the performance of the proposed method in uncertain continuous faulty situation.

Fault-tolerant Control of Unmanned Underwater Vehicles with Continuous Faults: Simulations and Experiments

Directory of Open Access Journals (Sweden)

Qian Liu

2009-12-01

Full Text Available A novel thruster fault diagnosis and accommodation method for open-frame underwater vehicles is presented in the paper. The proposed system consists of two units: a fault diagnosis unit and a fault accommodation unit. In the fault diagnosis unit an ICMAC (Improved Credit Assignment Cerebellar Model Articulation Controllers neural network information fusion model is used to realize the fault identification of the thruster. The fault accommodation unit is based on direct calculations of moment and the result of fault identification is used to find the solution of the control allocation problem. The approach resolves the continuous faulty identification of the UV. Results from the experiment are provided to illustrate the performance of the proposed method in uncertain continuous faulty situation.

Time Use in Rural Areas: A Case Study in Turkey

OpenAIRE

Erkan Erdil; Ozan Eruygur; Zehra Kasnakoglu

2006-01-01

This study aims to analyze rural household work and leisure time and how it is allocated among various activities and by socio-economic characteristics of individuals. The analysis is based on a survey carried out in two central Anatolian villages. Three time use questionnaires are administered between May-October 2003 during two different days of the week, an ordinary weekday and the day of the local bazaar. 138 household members from these two villages have participated in the survey. It is...

Geochemical behavior of rare earth elements of the hydrothermal alterations within the Tepeoba porphyry Cu-Mo-Au deposits at Balikesir, NW Turkey

Science.gov (United States)

Doner, Zeynep; Abdelnasser, Amr; Kiran Yildirim, Demet; Kumral, Mustafa

2016-04-01

This work reports the geochemical characteristics and behavior of the rare earth elements (REE) of the hydrothermal alteration of the Tepeoba porphyry Cu-Mo-Au deposit located in the Anatolian tectonic belt at Biga peninsula (Locally Balikesir province), NW Turkey. The Cu-Mo-Au mineralization at this deposit hosted in the hornfels rocks and related to the silicic to intermediate intrusion of Eybek pluton. It locally formed with brecciated zones and quartz vein stockworks, as well as the brittle fracture zones associated with intense hydrothermal alteration. Three main alteration zones with gradual boundaries formed in the mine area in the hornfels rock that represents the host rock, along that contact the Eybek pluton; potassic, propylitic and phyllic alteration zones. The potassic alteration zone that formed at the center having high amount of Cu-sulfide minerals contains biotite, muscovite, and sericite with less amount of K-feldspar and associated with tourmalinization alteration. The propylitic alteration surrounds the potassic alteration having high amount of Mo and Au and contains chlorite, albite, epidote, calcite and pyrite. The phyllic alteration zone also surrounds the potassic alteration containing quartz, sericite and pyrite minerals. Based on the REE characteristics and content and when we correlate the Alteration index (AI) with the light REEs and heavy REEs of each alteration zone, it concluded that the light REEs decrease and heavy REEs increase during the alteration processes. The relationships between K2O index with Eu/Eu* and Sr/Sr* reveals a positive correlation in the potassic and phyllic alteration zones and a negative correlation in the propylitic alteration zone. This refers to the hydrothermal solution which is responsible for the studied porphyry deposits and associated potassic and phyllic alterations has a positive Eu and Sr anomaly as well as these elements were added to the altered rock from the hydrothermal solution. Keywords: Rare

Enteric parvovirus infections of chickens and turkeys

Science.gov (United States)

Chicken and turkey parvoviruses are members of the Parvovirus family. Comparative sequence analysis of their genome structure revealed that they should form a new genus within the vertebrate Parvovirinae subfamily. The first chicken and turkey parvoviruses were identified by electron microscopy duri...

Faults Images

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Through the study of faults and their effects, much can be learned about the size and recurrence intervals of earthquakes. Faults also teach us about crustal...

The role of hydropower in meeting Turkey's electric energy demand

International Nuclear Information System (INIS)

Yuksek, Omer; Komurcu, Murat Ihsan; Yuksel, Ibrahim; Kaygusuz, Kamil

2006-01-01

The inherent technical, economic and environmental benefits of hydroelectric power, make it an important contributor to the future world energy mix, particularly in the developing countries. These countries, such as Turkey, have a great and ever-intensifying need for power and water supplies and they also have the greatest remaining hydro potential. From the viewpoint of energy sources such as petroleum and natural gas, Turkey is not a rich country; but it has an abundant hydropower potential to be used for generation of electricity and must increase hydropower production in the near future. This paper deals with policies to meet the increasing electricity demand for Turkey. Hydropower and especially small hydropower are emphasized as Turkey's renewable energy sources. The results of two case studies, whose results were not taken into consideration in calculating Turkey's hydro electric potential, are presented. Turkey's small hydro power potential is found to be an important energy source, especially in the Eastern Black Sea Region. The results of a study in which Turkey's long-term demand has been predicted are also presented. According to the results of this paper, Turkey's hydro electric potential can meet 33-46% of its electric energy demand in 2020 and this potential may easily and economically be developed

Renewable energy market conditions and barriers in Turkey

International Nuclear Information System (INIS)

Nalan, Cicek Bezir; Murat, Oeztuerk; Nuri, Oezek

2009-01-01

Decentralized wind, hydropower, biogas and biomass, geothermal, solar thermal and solar electricity energy systems are the most commonly found renewable energy technologies promoted for rural energy supply within sustainable developments programs. They are, therefore, seen to have a central place in the practice of sustainable development and in allowing less development countries to bypass the environmentally damaging fossil fuel intensive paths made by industrialized countries. On the political front, many less development countries are critical of pressure on them to adopt environmental energy technologies. Turkey is situated the meeting point of three continents (Asia, Europe and Africa) and stands as a bridge between Asia and Europe. The country is located in southeastern Europe and southwestern Asia. As Turkey's economy has expanded in recent years, the consumption of primary energy has increased. Presently in order to increase the energy production from domestic energy resources, decrease the use of fossil fuels as well as reduce of green house gas emissions different renewable energy sources are used for energy production in Turkey. The share of energy production from renewable energy sources has increased during the last 10 years. Turkey must import most of the energy to meet her needs. Turkey also has a large potential for renewable energies. The lack of knowledge about renewable energy technologies by most policy-makers, potential consumers, and energy firm managers has played against renewable energy developments. The paper presents renewable energy used in Turkey and Europe Union and evaluation of the market conditions and barriers of renewable energy use in Turkey. (author)

Food and nutrition policies: what's being done in Turkey.

Science.gov (United States)

Pekcan, Gülden

2006-02-01

The aim of the present paper is to describe the development of the National Plan of Action for Food and Nutrition (NPAFN) for Turkey. Access to a safe and healthy variety of food, a fundamental human right, was stressed by the International Conference on Nutrition and by the World Food Summit. In the International Conference on Nutrition in December 1992, one major commitment was the preparation of NPAFN. The NPAFN for Turkey was designed according to this commitment. Turkey. To this end, under the coordination of the State Planning Organization, a Working Committee Report for National Food and Nutrition Strategy of Turkey was prepared and published, with the participation of different sectors. The goal of the prepared National Food and Nutrition Strategy for Turkey is to protect and promote health through and healthy nutrition and reduce the burden of diseases, while contributing to socio-economic development and a sustainable food security. In Turkey the NPAFN was developed and implementation has initiated. Nearly for all the actions, related projects are being developed.

Energy production, consumption, policies and recent developments in Turkey

International Nuclear Information System (INIS)

Toklu, E.; Gueney, M.S.; Isik, M.; Comakli, O.; Kaygusuz, K.

2010-01-01

Many factors to be appropriately addressed in moving towards energy sustainability in Turkey are examined. These include harnessing sustainable energy sources, utilizing sustainable energy carriers, increasing efficiency, reducing environmental impact and improving socioeconomic acceptability. The latter factor includes community involvement and social acceptability, economic affordability and equity, lifestyles, land use and aesthetics. On the other hand, Turkey, with its young population and growing energy demand per person, its fast growing urbanization, and its economic development, has been one of the fast growing power markets of the world for the last two decades. Turkey is heavily dependent on expensive imported energy resources that place a big burden on the economy and air pollution is becoming a great environmental concern in the country. In this regard, renewable energy resources appear to be the one of the most efficient and effective solutions for clean and sustainable energy development in Turkey. Turkey's geographical location has several advantages for extensive use of most of these renewable energy sources. This article presents a review of the potential and utilization of the energy sources in Turkey. (author)

Energy production, consumption, policies and recent developments in Turkey

Energy Technology Data Exchange (ETDEWEB)

Toklu, E.; Gueney, M.S.; Isik, M.; Comakli, O.; Kaygusuz, K. [Department of Mechanical Engineering, Bayburt University, 69000 Bayburt (Turkey)

2010-05-15

Many factors to be appropriately addressed in moving towards energy sustainability in Turkey are examined. These include harnessing sustainable energy sources, utilizing sustainable energy carriers, increasing efficiency, reducing environmental impact and improving socioeconomic acceptability. The latter factor includes community involvement and social acceptability, economic affordability and equity, lifestyles, land use and aesthetics. On the other hand, Turkey, with its young population and growing energy demand per person, its fast growing urbanization, and its economic development, has been one of the fast growing power markets of the world for the last two decades. Turkey is heavily dependent on expensive imported energy resources that place a big burden on the economy and air pollution is becoming a great environmental concern in the country. In this regard, renewable energy resources appear to be the one of the most efficient and effective solutions for clean and sustainable energy development in Turkey. Turkey's geographical location has several advantages for extensive use of most of these renewable energy sources. This article presents a review of the potential and utilization of the energy sources in Turkey. (author)

Detection and subtyping avian metapneumovirus from turkeys in Iran.

Science.gov (United States)

Mayahi, Mansour; Momtaz, Hassan; Jafari, Ramezan Ali; Zamani, Pejman

2017-01-01

Avian metapneumovirus (aMPV) causes diseases like rhinotracheitis in turkeys, swollen head syndrome in chickens and avian rhinotracheitis in other birds. Causing respiratory problems, aMPV adversely affects production and inflicts immense economic losses and mortalities, especially in turkey flocks. In recent years, several serological and molecular studies have been conducted on this virus, especially in poultry in Asia and Iran. The purpose of the present study was detecting and subtyping aMPV by reverse transcriptase polymerase chain reaction (RT-PCR) from non-vaccinated, commercial turkey flocks in Iran for the first time. Sixty three meat-type unvaccinated turkey flocks from several provinces of Iran were sampled in major turkey abattoirs. Samples were tested by RT-PCR for detecting and subtyping aMPV. The results showed that 26 samples from three flocks (4.10%) were positive for viral RNA and all of the viruses were found to be subtype B of aMPV. As a result, vaccination especially against subtype B of aMPV should be considered in turkey flocks in Iran to control aMPV infections.

Turkey's status in nuclear field

International Nuclear Information System (INIS)

Aykol, F.; Oezkan, R.; Atila, B.; Hanguel, G.; Aksu, M.L.

2002-01-01

Full text: Turkey is a country with dynamic economic development and rapid population growth and nuclear energy is an integral part of these dynamics. Turkish Atomic Energy Authority (TAEA) is in charge of regulation and control of all activities related to nuclear field, including safety inspections and licensing. The TAEA is also responsible for the sensitive task of improving public awareness of nuclear technology which includes the use of nuclear power. Turkey's experience with nuclear power dates back to the 1960's, as the first nuclear research reactor started to operate in Istanbul in 1962. There were various plans for the introduction of nuclear power to the country. However the plans for the construction of the first nuclear power in the country were postponed for an indefinite period in 2000. In the wake of this decision TAEA initiated the activities to establish a nuclear policy in the country which includes creating the technical know-how and establishing new generation nuclear power plants in Turkey. The Authority is also responsible for the safe use of nuclear energy in medicine, agriculture, animal health, industry, food irradiation and in all kinds of research activities. The authority has carried or is currently continuing 12 National Technical Cooperation, 30 Research Contract, 21 Regional Europe ongoing IAEA projects and 31 State Planning Organization projects. There were 7571 radiological, 208 radiotherapy, 3792 industrial and 214 instruments licensed and registered by the Radiation Health and Safety Department of the Authority. We are in the opinion that developing a nuclear technology substructure in both Turkey and Turkish Countries will be of great benefit for the Euro-Asia region. We must emphasize that Turkey is the partner of all nonproliferation treaties and has no intention of using nuclear power for non peaceful purposes whatsoever

A Design Method for Fault Reconfiguration and Fault-Tolerant Control of a Servo Motor

Directory of Open Access Journals (Sweden)

Jing He

2013-01-01

Full Text Available A design scheme that integrates fault reconfiguration and fault-tolerant position control is proposed for a nonlinear servo system with friction. Analysis of the non-linear friction torque and fault in the system is used to guide design of a sliding mode position controller. A sliding mode observer is designed to achieve fault reconfiguration based on the equivalence principle. Thus, active fault-tolerant position control of the system can be realized. A real-time simulation experiment is performed on a hardware-in-loop simulation platform. The results show that the system reconfigures well for both incipient and abrupt faults. Under the fault-tolerant control mechanism, the output signal for the system position can rapidly track given values without being influenced by faults.

Active Fault Isolation in MIMO Systems

DEFF Research Database (Denmark)

Niemann, Hans Henrik; Poulsen, Niels Kjølstad

2014-01-01

isolation is based directly on the input/output s ignals applied for the fault detection. It is guaranteed that the fault group includes the fault that had occurred in the system. The second step is individual fault isolation in the fault group . Both types of isolation are obtained by applying dedicated......Active fault isolation of parametric faults in closed-loop MIMO system s are considered in this paper. The fault isolation consists of two steps. T he first step is group- wise fault isolation. Here, a group of faults is isolated from other pos sible faults in the system. The group-wise fault...

Fault Features Extraction and Identification based Rolling Bearing Fault Diagnosis

International Nuclear Information System (INIS)

Qin, B; Sun, G D; Zhang L Y; Wang J G; HU, J

2017-01-01

For the fault classification model based on extreme learning machine (ELM), the diagnosis accuracy and stability of rolling bearing is greatly influenced by a critical parameter, which is the number of nodes in hidden layer of ELM. An adaptive adjustment strategy is proposed based on vibrational mode decomposition, permutation entropy, and nuclear kernel extreme learning machine to determine the tunable parameter. First, the vibration signals are measured and then decomposed into different fault feature models based on variation mode decomposition. Then, fault feature of each model is formed to a high dimensional feature vector set based on permutation entropy. Second, the ELM output function is expressed by the inner product of Gauss kernel function to adaptively determine the number of hidden layer nodes. Finally, the high dimension feature vector set is used as the input to establish the kernel ELM rolling bearing fault classification model, and the classification and identification of different fault states of rolling bearings are carried out. In comparison with the fault classification methods based on support vector machine and ELM, the experimental results show that the proposed method has higher classification accuracy and better generalization ability. (paper)

Bringing EU-Turkey trade and investment relations up to date?

OpenAIRE

Dawar, Kamala; Sübidey, Togan

2016-01-01

The case is made that the EU-Turkey CU of 1995 covering industrial goods should be modernised and modified to take into account the various and growing criticisms of the original CU. Furthermore, economic integration between the EU and Turkey should be strengthened by signing a complementary deep integration regional trade agreement (RTA) between the EU and Turkey, covering agriculture, SPS measures, services, government procurement, investment, and dispute settlement. For Turkey, the objecti...

Addressing wild turkey population declines using structured decision making

Science.gov (United States)

Robinson, Kelly F.; Fuller, Angela K.; Schiavone, Michael V.; Swift, Bryan L.; Diefenbach, Duane R.; Siemer, William F.; Decker, Daniel J.

2017-01-01

We present a case study from New York, USA, of the use of structured decision making (SDM) to identify fall turkey harvest regulations that best meet stakeholder objectives, in light of recent apparent declines in abundance of wild turkeys in the northeastern United States. We used the SDM framework to incorporate the multiple objectives associated with turkey hunting, stakeholder desires, and region-specific ecological and environmental factors that could influence fall harvest. We identified a set of 4 fall harvest regulations, composed of different season lengths and bag limits, and evaluated their relative achievement of the objectives. We used a stochastic turkey population model, statistical modeling, and expert elicitation to evaluate the consequences of each harvest regulation on each of the objectives. We conducted a statewide mail survey of fall turkey hunters in New York to gather the necessary information to evaluate tradeoffs among multiple objectives associated with hunter satisfaction. The optimal fall harvest regulation was a 2-week season and allowed for the harvest of 1 bird/hunter. This regulation was the most conservative of those evaluated, reflecting the concerns about recent declines in turkey abundance among agency wildlife biologists and the hunting public. Depending on the region of the state, the 2-week, 1-bird regulation was predicted to result in 7–32% more turkeys on the landscape after 5 years. The SDM process provided a transparent framework for setting fall turkey harvest regulations and reduced potential stakeholder conflict by explicitly taking the multiple objectives of different stakeholder groups into account.

Guaranteed Cost Fault-Tolerant Control for Networked Control Systems with Sensor Faults

Directory of Open Access Journals (Sweden)

Qixin Zhu

2015-01-01

Full Text Available For the large scale and complicated structure of networked control systems, time-varying sensor faults could inevitably occur when the system works in a poor environment. Guaranteed cost fault-tolerant controller for the new networked control systems with time-varying sensor faults is designed in this paper. Based on time delay of the network transmission environment, the networked control systems with sensor faults are modeled as a discrete-time system with uncertain parameters. And the model of networked control systems is related to the boundary values of the sensor faults. Moreover, using Lyapunov stability theory and linear matrix inequalities (LMI approach, the guaranteed cost fault-tolerant controller is verified to render such networked control systems asymptotically stable. Finally, simulations are included to demonstrate the theoretical results.

[Investigation of dengue virus and yellow fever virus seropositivities in blood donors from Central/Northern Anatolia, Turkey].

Science.gov (United States)

Ergünay, Koray; Saygan, Mehmet B; Aydoğan, Sibel; Litzba, Nadine; Niedrig, Matthias; Pınar, Ahmet; Us, Dürdal

2010-07-01

Dengue virus (DENV) and yellow fever virus (YFV) are two of the globally prevalent vector-borne flaviviruses. Data on these viruses from Turkey is limited to a single study originating from the western, Aegean region of Turkey, where evidence for DENV exposure had been confirmed in residents and presence of hemagglutination inhibiting antibodies against YFV had been revealed. The aim of this study was to investigate the rates of seropositivity of DENV and YFV in blood donors from Central/Northern Anatolia, Turkey, for the demonstration of possible human exposure. Serum samples were collected by the Turkish Red Crescent Middle Anatolia Regional Blood Center from donation sites at Ankara, Konya, Eskişehir and Zonguldak provinces and included in the study after informed consent. Ankara is the capital and second most-populated city in Turkey. All samples were previously evaluated for West Nile and tick-borne encephalitis virus antibodies and found to be negative. A total of 2435 and 1502 sera have been evaluated for IgG antibodies against DENV and YFV, respectively. Commercial enzymelinked immunosorbent assays (ELISAs) and indirect immunofluorescence tests (IIFTs) were applied (Euroimmun, Germany) for DENV/YFV IgG surveillance. DENV IgG reactive sera were further evaluated for IgM by ELISA and a commercial mosaic IIFT to determine DENV subtypes. IgM positive samples were also analyzed by a commercial NS1 antigen detection assay (Bio-Rad Laboratories, France). YFV IgG reactive samples were evaluated by IIFT for IgM and via mosaic IIFT and antibody specificity were confirmed by plaque reduction neutralization test (PRNT). Anti-DENV IgGs were demonstrated in repeated assays in 0.9% (21/2435) of the sera. In two samples with borderline IgG results, presence of DENV IgM was detected, one of which was also borderline positive for DENV NS1 antigen. In 14.3% (3/21) of the IgG reactive sera, mosaic IIFT was evaluated as positive and displayed prominent reactivity for DENV-2 in

Isolation of a highly pathogenic influenza virus from turkeys.

Science.gov (United States)

McNulty, M S; Allan, G M; McCracken, R M; McParland, P J

1985-01-01

An influenza virus was isolated from turkeys with an acute disease causing 30% mortality. The virus was subtyped as H5 N8. The nomenclature A/turkey/Ireland/83 (H5 N8) is proposed for this isolate. The virus had an ICPI of 1.80 to 1.85 for 1-day-old chicks and an IVPI of 2.74 for 6-week-old chickens. Following oronasal inoculation of juvenile and adult turkeys, chickens and ducks with the isolate, 100% mortality occurred in turkeys and chickens. No clinical signs were observed in inoculated ducks, but all developed serum antibody titres against the virus.

Quality of slaughter material ? BIG 6 heavy turkeys

OpenAIRE

Artur Kryza; Marian Pietrzak; Ewa Gornowicz

2016-01-01

The aim of the study was to perform a randomized assessment of slaughter material in the form of intensively farmed turkeys obtained by large poultry slaughter and meat processing plants. The assessment involved determining the slaughter value and physical characteristics of the meat. Samples (23 male and 12 female turkeys) were collected from the processing line of a large commercial poultry processing facility, and hybrid turkeys of a BIG 6 heavy breeding line came from different producers....

Homogeneity of small-scale earthquake faulting, stress, and fault strength

Science.gov (United States)

Hardebeck, J.L.

2006-01-01

Small-scale faulting at seismogenic depths in the crust appears to be more homogeneous than previously thought. I study three new high-quality focal-mechanism datasets of small (M angular difference between their focal mechanisms. Closely spaced earthquakes (interhypocentral distance faults of many orientations may or may not be present, only similarly oriented fault planes produce earthquakes contemporaneously. On these short length scales, the crustal stress orientation and fault strength (coefficient of friction) are inferred to be homogeneous as well, to produce such similar earthquakes. Over larger length scales (???2-50 km), focal mechanisms become more diverse with increasing interhypocentral distance (differing on average by 40-70??). Mechanism variability on ???2- to 50 km length scales can be explained by ralatively small variations (???30%) in stress or fault strength. It is possible that most of this small apparent heterogeneity in stress of strength comes from measurement error in the focal mechanisms, as negligibble variation in stress or fault strength (<10%) is needed if each earthquake is assigned the optimally oriented focal mechanism within the 1-sigma confidence region. This local homogeneity in stress orientation and fault strength is encouraging, implying it may be possible to measure these parameters with enough precision to be useful in studying and modeling large earthquakes.

Importance of biomass energy as alternative to other sources in Turkey

International Nuclear Information System (INIS)

Gokcol, Cihan; Dursun, Bahtiyar; Alboyaci, Bora; Sunan, Erkan

2009-01-01

Energy plays a vital role in socio-economic development and raising standards of human beings. Turkey is a rapidly growing country; both its population and economy are expanding each year so its energy demand increases correspondingly and this increasing demand has to be met for keeping sustainable development in the economy and raising living conditions of mankind. Although Turkey has many energy sources, it is a big energy importer. Turkey has a lot of potential to supply its own energy, which could be put to use in order to avoid this energy dependence. Additionally, Turkey is a country that has an abundance of renewable energy sources and can essentially provide all energy requirements from indigenous energy sources. Biomass is one of the most promising energy sources considered to be alternative to conventional ones. This paper investigates the importance of biomass energy in Turkey. Additionally, the potential of biomass and its utilization in Turkey are presented in detail. Turkey has always been one of the major agricultural countries of the world. The importance of agriculture is increasing due to biomass energy being a major resource of Turkey. Like many developing countries, Turkey relies on biomass to satisfy much of its energy requirements

Vipava fault (Slovenia

Directory of Open Access Journals (Sweden)

Ladislav Placer

2008-06-01

Full Text Available During mapping of the already accomplished Razdrto – Senožeče section of motorway and geologic surveying of construction operations of the trunk road between Razdrto and Vipava in northwestern part of External Dinarides on the southwestern slope of Mt. Nanos, called Rebrnice, a steep NW-SE striking fault was recognized, situated between the Predjama and the Ra{a faults. The fault was named Vipava fault after the Vipava town. An analysis of subrecent gravitational slips at Rebrnice indicates that they were probably associated with the activity of this fault. Unpublished results of a repeated levelling line along the regional road passing across the Vipava fault zone suggest its possible present activity. It would be meaningful to verify this by appropriate geodetic measurements, and to study the actual gravitational slips at Rebrnice. The association between tectonics and gravitational slips in this and in similar extreme cases in the areas of Alps and Dinarides points at the need of complex studying of geologic proceses.

Distribution of Wild and Cultivated Grapes in Turkey

Directory of Open Access Journals (Sweden)

Ibrahim H UZUN

2010-12-01

Full Text Available Turkey is one of main gene centers in the world for grapes. It is believed that cultivated grapes have their origins in Turkey and the surrounding countries. Vitis vinifera ssp sylvestris is the only wild grape species in this region. That is why Turkey has a very large amount of wild grapevine populations and grape cultivars which offer to grapevine breeders a valuable gene pool. Wild grapevines have significant characters for inducing the resistence to biotic and abiotic stress factors, such as resistance to lime, drought, pests and diseases. Turkey has over 1.600 local grape cultivars, among which the majority of them are conserved at the national grape collection vineyard in Tekirda?. They are mostly used as table grapes, dried grapes or for local consumptions. Wild grapes are distributed all over the country territory, mainly in the river basins and forests. Wild grape collection vineyards were established at some universities in Turkey. These grapevines will be screened for the resistance to biotic and abiotic stress factors.

Nuclear power plant pressurizer fault diagnosis using fuzzy signed-digraph and spurious faults elimination methods

International Nuclear Information System (INIS)

Park, Joo Hyun

1994-02-01

In this work, the Fuzzy Signed Digraph(FSD) method which has been researched for the fault diagnosis of industrial process plant systems is improved and applied to the fault diagnosis of the Kori-2 nuclear power plant pressurizer. A method for spurious faults elimination is also suggested and applied to the fault diagnosis. By using these methods, we could diagnose the multi-faults of the pressurizer and could also eliminate the spurious faults of the pressurizer caused by other subsystems. Besides the multi-fault diagnosis and system-wide diagnosis capabilities, the proposed method has many merits such as real-time diagnosis capability, independency of fault pattern, direct use of sensor values, and transparency of the fault propagation to the operators

Nuclear power plant pressurizer fault diagnosis using fuzzy signed-digraph and spurious faults elimination methods

International Nuclear Information System (INIS)

Park, Joo Hyun; Seong, Poong Hyun

1994-01-01

In this work, the Fuzzy Signed Digraph (FSD) method which has been researched for the fault diagnosis of industrial process plant systems is improved and applied to the fault diagnosis of the Kori-2 nuclear power plant pressurizer. A method for spurious faults elimination is also suggested and applied to the fault diagnosis. By using these methods, we could diagnose the multi-faults of the pressurizer and could also eliminate the spurious faults of the pressurizer caused by other subsystems. Besides the multi-fault diagnosis and system-wide diagnosis capabilities, the proposed method has many merits such as real-time diagnosis capability, independency of fault pattern, direct use of sensor values, and transparency of the fault propagation to the operators. (Author)

3D Numerical Examination of Continental Mantle Lithosphere Response to Lower Crust Eclogitization and Nearby Slab Subduction

Science.gov (United States)

Janbakhsh, P.; Pysklywec, R.

2017-12-01

2D numerical modeling techniques have made great contribution to understanding geodynamic processes involved in crustal and lithospheric scale deformations for the past 20 years. The aim of this presentation is to expand the scope covered by previous researchers to 3 dimensions to address out-of-plane intrusion and extrusion of mantle material in and out of model space, and toroidal mantle wedge flows. In addition, 3D velocity boundary conditions can create more realistic models to replicate real case scenarios. 3D numerical experiments that will be presented are designed to investigate the density and viscosity effects of lower crustal eclogitization on the decoupling process of continental mantle lithosphere from the crust and its delamination. In addition, these models examine near-field effects of a subducting ocean lithosphere and a lithospheric scale fault zone on the evolution of the processes. The model solutions and predictions will also be compared against the Anatolian geology where subduction of Aegean and Arabian slabs, and the northern boundary with the North Anatolian Fault Zone are considered as two main contributing factors to anomalous crustal uplift, missing mantle lithosphere, and anomalous surface heat flux.

Turkey: migration 18th-20th century

NARCIS (Netherlands)

Akgündüz, A.; Ness, I.

2013-01-01

For many centuries, Europe called the Ottoman empire "Turkey." This applied to the registry of population movements to and from the Ottoman empire insofar as such registrations were made. The country's rulers and inhabitants, however, only took on the name Turkey (Türkiye) in 1923, upon proclamation

(Coleoptera: Carabidae: Pterostichinae) from south-central Turkey

African Journals Online (AJOL)

PRECIOUS

2009-11-02

Nov 2, 2009 ... Key words: Amara, Pterostichinae, Carabidae, Turkey. INTRODUCTION. This publication is the second part of a taxonomic and geographical treatment of the Pterostichinae of south- central Turkey, with a focus on sites in the province of. Kahramanmaraş and some of the geographically adjacent provinces.

Diagnosis and fault-tolerant control

CERN Document Server

Blanke, Mogens; Lunze, Jan; Staroswiecki, Marcel

2016-01-01

Fault-tolerant control aims at a gradual shutdown response in automated systems when faults occur. It satisfies the industrial demand for enhanced availability and safety, in contrast to traditional reactions to faults, which bring about sudden shutdowns and loss of availability. The book presents effective model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, to test the fault detectability and to find the redundancies in the process that can be used to ensure fault tolerance. It also introduces design methods suitable for diagnostic systems and fault-tolerant controllers for continuous processes that are described by analytical models of discrete-event systems represented by automata. The book is suitable for engineering students, engineers in industry and researchers who wish to get an overview of the variety of approaches to process diagnosis and fault-tolerant contro...

Improved SAR Image Coregistration Using Pixel-Offset Series

KAUST Repository

Wang, Teng

2014-03-14

Synthetic aperture radar (SAR) image coregistration is a key procedure before interferometric SAR (InSAR) time-series analysis can be started. However, many geophysical data sets suffer from severe decorrelation problems due to a variety of reasons, making precise coregistration a nontrivial task. Here, we present a new strategy that uses a pixel-offset series of detected subimage patches dominated by point-like targets (PTs) to improve SAR image coregistrations. First, all potentially coherent image pairs are coregistered in a conventional way. In this step, we propose a coregistration quality index for each image to rank its relative “significance” within the data set and to select a reference image for the SAR data set. Then, a pixel-offset series of detected PTs is made from amplitude maps to improve the geometrical mapping functions. Finally, all images are resampled depending on the pixel offsets calculated from the updated geometrical mapping functions. We used images from a rural region near the North Anatolian Fault in eastern Turkey to test the proposed method, and clear coregistration improvements were found based on amplitude stability. This enhanced the fact that the coregistration strategy should therefore lead to improved InSAR time-series analysis results.

Improved SAR Image Coregistration Using Pixel-Offset Series

KAUST Repository

Wang, Teng; Jonsson, Sigurjon; Hanssen, Ramon F.

2014-01-01

Synthetic aperture radar (SAR) image coregistration is a key procedure before interferometric SAR (InSAR) time-series analysis can be started. However, many geophysical data sets suffer from severe decorrelation problems due to a variety of reasons, making precise coregistration a nontrivial task. Here, we present a new strategy that uses a pixel-offset series of detected subimage patches dominated by point-like targets (PTs) to improve SAR image coregistrations. First, all potentially coherent image pairs are coregistered in a conventional way. In this step, we propose a coregistration quality index for each image to rank its relative “significance” within the data set and to select a reference image for the SAR data set. Then, a pixel-offset series of detected PTs is made from amplitude maps to improve the geometrical mapping functions. Finally, all images are resampled depending on the pixel offsets calculated from the updated geometrical mapping functions. We used images from a rural region near the North Anatolian Fault in eastern Turkey to test the proposed method, and clear coregistration improvements were found based on amplitude stability. This enhanced the fact that the coregistration strategy should therefore lead to improved InSAR time-series analysis results.

Review of Turkey's renewable energy potential

International Nuclear Information System (INIS)

Ozgur, M. Arif

2008-01-01

The use of renewable energy has a long history. Biomass, for instance, has been used for heating and cooking, while wind has been used in the irrigation of fields and to drive windmills for centuries. Although Turkey has many energy resources, all of these with the exception of coal and hydropower, cannot meet the total energy demand. Turkey has been importing resources to meet this deficit. These resources have become increasingly expensive and also have undesirably high emissions ratings. Turkey has an extensive shoreline and mountains and is rich in renewable energy potential. The share of renewables on total electricity generation is 29.63% while that of natural gas is 45% for the year 2006. The projection prepared for the period between 2006 and 2020 aims an annual growth of 8% for the total electricity generation. According to this projection, it is expected that renewables will have a share about 23.68% with a decrease of 5.95% while natural gas will have a share about 33.38% for 2020. This paper presents the present state of world renewable energy sources and then looks in detail at the potential resources available in Turkey. Energy politics are also considered. (author)

Optimal design of superconducting fault detector for superconductor triggered fault current limiters

International Nuclear Information System (INIS)

Yim, S.-W.; Kim, H.-R.; Hyun, O.-B.; Sim, J.; Park, K.B.; Lee, B.W.

2008-01-01

We have designed and tested a superconducting fault detector (SFD) for a 22.9 kV superconductor triggered fault current limiters (STFCLs) using Au/YBCO thin films. The SFD is to detect a fault and commutate the current from the primary path to the secondary path of the STFCL. First, quench characteristics of the Au/YBCO thin films were investigated for various faults having different fault duration. The rated voltage of the Au/YBCO thin films was determined from the results, considering the stability of the Au/YBCO elements. Second, the recovery time to superconductivity after quench was measured in each fault case. In addition, the dependence of the recovery characteristics on numbers and dimension of Au/YBCO elements were investigated. Based on the results, a SFD was designed, fabricated and tested. The SFD successfully detected a fault current and carried out the line commutation. Its recovery time was confirmed to be less than 0.5 s, satisfying the reclosing scheme in the Korea Electric Power Corporation (KEPCO)'s power grid

Off-fault tip splay networks: a genetic and generic property of faults indicative of their long-term propagation, and a major component of off-fault damage

Science.gov (United States)

Perrin, C.; Manighetti, I.; Gaudemer, Y.

2015-12-01

Faults grow over the long-term by accumulating displacement and lengthening, i.e., propagating laterally. We use fault maps and fault propagation evidences available in literature to examine geometrical relations between parent faults and off-fault splays. The population includes 47 worldwide crustal faults with lengths from millimeters to thousands of kilometers and of different slip modes. We show that fault splays form adjacent to any propagating fault tip, whereas they are absent at non-propagating fault ends. Independent of parent fault length, slip mode, context, etc, tip splay networks have a similar fan shape widening in direction of long-term propagation, a similar relative length and width (~30 and ~10 % of parent fault length, respectively), and a similar range of mean angles to parent fault (10-20°). Tip splays more commonly develop on one side only of the parent fault. We infer that tip splay networks are a genetic and a generic property of faults indicative of their long-term propagation. We suggest that they represent the most recent damage off-the parent fault, formed during the most recent phase of fault lengthening. The scaling relation between parent fault length and width of tip splay network implies that damage zones enlarge as parent fault length increases. Elastic properties of host rocks might thus be modified at large distances away from a fault, up to 10% of its length. During an earthquake, a significant fraction of coseismic slip and stress is dissipated into the permanent damage zone that surrounds the causative fault. We infer that coseismic dissipation might occur away from a rupture zone as far as a distance of 10% of the length of its causative fault. Coseismic deformations and stress transfers might thus be significant in broad regions about principal rupture traces. This work has been published in Comptes Rendus Geoscience under doi:10.1016/j.crte.2015.05.002 (http://www.sciencedirect.com/science/article/pii/S1631071315000528).

Data-based fault-tolerant control for affine nonlinear systems with actuator faults.

Science.gov (United States)

Xie, Chun-Hua; Yang, Guang-Hong

2016-09-01

This paper investigates the fault-tolerant control (FTC) problem for unknown nonlinear systems with actuator faults including stuck, outage, bias and loss of effectiveness. The upper bounds of stuck faults, bias faults and loss of effectiveness faults are unknown. A new data-based FTC scheme is proposed. It consists of the online estimations of the bounds and a state-dependent function. The estimations are adjusted online to compensate automatically the actuator faults. The state-dependent function solved by using real system data helps to stabilize the system. Furthermore, all signals in the resulting closed-loop system are uniformly bounded and the states converge asymptotically to zero. Compared with the existing results, the proposed approach is data-based. Finally, two simulation examples are provided to show the effectiveness of the proposed approach. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

RECENT GEODYNAMICS OF FAULT ZONES: FAULTING IN REAL TIME SCALE

Directory of Open Access Journals (Sweden)

Yu. O. Kuzmin

2014-01-01

Full Text Available Recent deformation processes taking place in real time are analyzed on the basis of data on fault zones which were collected by long-term detailed geodetic survey studies with application of field methods and satellite monitoring.A new category of recent crustal movements is described and termed as parametrically induced tectonic strain in fault zones. It is shown that in the fault zones located in seismically active and aseismic regions, super intensive displacements of the crust (5 to 7 cm per year, i.e. (5 to 7·10–5 per year occur due to very small external impacts of natural or technogenic / industrial origin.The spatial discreteness of anomalous deformation processes is established along the strike of the regional Rechitsky fault in the Pripyat basin. It is concluded that recent anomalous activity of the fault zones needs to be taken into account in defining regional regularities of geodynamic processes on the basis of real-time measurements.The paper presents results of analyses of data collected by long-term (20 to 50 years geodetic surveys in highly seismically active regions of Kopetdag, Kamchatka and California. It is evidenced by instrumental geodetic measurements of recent vertical and horizontal displacements in fault zones that deformations are ‘paradoxically’ deviating from the inherited movements of the past geological periods.In terms of the recent geodynamics, the ‘paradoxes’ of high and low strain velocities are related to a reliable empirical fact of the presence of extremely high local velocities of deformations in the fault zones (about 10–5 per year and above, which take place at the background of slow regional deformations which velocities are lower by the order of 2 to 3. Very low average annual velocities of horizontal deformation are recorded in the seismic regions of Kopetdag and Kamchatka and in the San Andreas fault zone; they amount to only 3 to 5 amplitudes of the earth tidal deformations per year.A ‘fault

Fault-tolerant computing systems

International Nuclear Information System (INIS)

Dal Cin, M.; Hohl, W.

1991-01-01

Tests, Diagnosis and Fault Treatment were chosen as the guiding themes of the conference. However, the scope of the conference included reliability, availability, safety and security issues in software and hardware systems as well. The sessions were organized for the conference which was completed by an industrial presentation: Keynote Address, Reconfiguration and Recover, System Level Diagnosis, Voting and Agreement, Testing, Fault-Tolerant Circuits, Array Testing, Modelling, Applied Fault Tolerance, Fault-Tolerant Arrays and Systems, Interconnection Networks, Fault-Tolerant Software. One paper has been indexed separately in the database. (orig./HP)

Energy policies of IEA countries: Turkey 2005 review

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This report provides a comprehensive in-depth assessment of the energy policies of Turkey including recommendations by the IEA on future policy developments. Recently, Turkey has taken steps to implement energy market reforms which have resulted in clear and significant benefits. Now, continued action is needed to see the process through to a successful conclusion. It is necessary to restructure the state-owned enterprises to operate in a competitive market, to create independent electricity and gas operators and to remove cross-subsidies from electricity and gas prices. Turkey has been very active in international co-operation in the energy sector. Some important oil and gas pipeline projects are underway or almost completed. This will improve the security of supply in Turkey and maintain its role as an important 'energy corridor' between East and West, while avoiding overuse of the Turkish Straits. Synchronisation of Turkey's electricity networks with the European UCTE grid is planned for 2006. Furthermore, the country already has transposed most EU energy laws and standards into national legislation. Turkey's general approach to energy policy has been highly supply-oriented. However, recent efforts have begun to focus more on energy efficiency and conservation. Nevertheless, stronger energy efficiency policies are needed, particularly in the transport sector. Turkey ratified the Framework Convention on Climate Change in February 2004 and is developing its climate change strategy. The government should strive to monitor the cost-effectiveness of its policies, consider defining an emissions target and ensure coordination among the various government bodies. Despite past progress, work remains to be done to achieve further reductions in air pollution. 28 figs., 23 tabs., 3 annexes

Turistlerin Anadolu Misafirperverliği Algısının Müşteri Memnuniyeti ve Müşteri Sadakatine Etkisi (The Impact of the Customer Perception of the Anatolian Hospitality on the Custumer Satisfaction and Customer Loyalty

Directory of Open Access Journals (Sweden)

Kemal ÇUBUKCU

2016-03-01

Full Text Available The “Anatolian Hospitality and Customer Satisfaction Survey” formed by such scales developed at the final stage was applied to 558 customers of four and five star hotels in İstanbul in July and August 2015. Analysis was achieved upon 519 acceptable observations by structural equation modeling of AMOS 18 program. In the research, customer satisfaction having a strong affection customer loyalty, customer satisfaction mediating the relationship between the perception of Anatolian hospitality and customer loyalty and when the roles of the variables have taken into notice such as the understanding of the staff by service, quality of working customers interaction, customers perception towards the understanding of staff by service, the attitude towards the customers, the quality of relationship that these seem to support the general opinion in literature.

Hybrid War and Its Strategic Implications to Turkey

OpenAIRE

Bingöl, Oktay

2017-01-01

Discussions on the hybrid threats and hybrid wars have begun to gain interest among the securitycommunities around the world since 2000s, and exponentially increased after Russian-Ukraine conflict in 2014. The political and military conflict between Russia and Turkey sinceNovember 2015 has carried the discussion to Turkey. Now it is believed that Turkey is infact in a multi-front hybrid war with some of its neighbors but not just Russia. In this articleit is aimed to fully explore hybrid war ...

Turkey's natural gas necessity, consumption and future perspectives

Energy Technology Data Exchange (ETDEWEB)

Kilic, A.M. [Mining Engineering Department, Faculty of Engineering and Architecture, Cukurova University, 01330 Balcali, Adana (Turkey)]. E-mail: kilicm@cu.edu.tr

2006-09-15

Turkey is an important candidate to be the 'energy corridor' in the transmission of the abundant oil and natural gas resources of the Middle East and Middle Asia countries to the Western market. Furthermore, Turkey is planning to increase its oil and gas pipeline infrastructure to accommodate its increased energy consumption. Naturally, Turkish natural gas usage is projected to increase remarkably in coming years, with the prime consumers, expected to be industry and power plants. Energy demand of Turkey is growing by 8% annually, one of the highest rates in the world. In addition, natural gas consumption is the fastest growing primary energy source in Turkey. Gas sales started at 0.5 bcm (billion cubic meters), in 1987 and reached approximately 22 bcm in 2003. This article deals with energy policies and natural gas consumption of Turkey. Besides modernization of present lines and realization of capacity increase, new lines will also be needed. In this context, Turkey, due to its geographical location is, in an important position to vary European supply. Therefore, Turkey's role as a transitory area gains importance.

GERMANY & TURKEY – A PARTNERSHIP PERSPECTIVE

Directory of Open Access Journals (Sweden)

Bestenigar KARA

2015-04-01

Full Text Available The article shortly deals with economic and commercial relations between Turkey, that keeps close regulary economic, political and cultural relationship and Germany, which is one of six founding fathers of the European Union. The subject of article has been searched within the following framework: Measurement of commercial relations between export and import between, investment relations between Germany and Turkey, mutual distribution sector.

Active Fault-Tolerant Control for Wind Turbine with Simultaneous Actuator and Sensor Faults

Directory of Open Access Journals (Sweden)

Lei Wang

2017-01-01

Full Text Available The purpose of this paper is to show a novel fault-tolerant tracking control (FTC strategy with robust fault estimation and compensating for simultaneous actuator sensor faults. Based on the framework of fault-tolerant control, developing an FTC design method for wind turbines is a challenge and, thus, they can tolerate simultaneous pitch actuator and pitch sensor faults having bounded first time derivatives. The paper’s key contribution is proposing a descriptor sliding mode method, in which for establishing a novel augmented descriptor system, with which we can estimate the state of system and reconstruct fault by designing descriptor sliding mode observer, the paper introduces an auxiliary descriptor state vector composed by a system state vector, actuator fault vector, and sensor fault vector. By the optimized method of LMI, the conditions for stability that estimated error dynamics are set up to promote the determination of the parameters designed. With this estimation, and designing a fault-tolerant controller, the system’s stability can be maintained. The effectiveness of the design strategy is verified by implementing the controller in the National Renewable Energy Laboratory’s 5-MW nonlinear, high-fidelity wind turbine model (FAST and simulating it in MATLAB/Simulink.

The San Andreas Fault and a Strike-slip Fault on Europa

Science.gov (United States)

1998-01-01

The mosaic on the right of the south polar region of Jupiter's moon Europa shows the northern 290 kilometers (180 miles) of a strike-slip fault named Astypalaea Linea. The entire fault is about 810 kilometers (500 miles) long, the size of the California portion of the San Andreas fault on Earth which runs from the California-Mexico border north to the San Francisco Bay. The left mosaic shows the portion of the San Andreas fault near California's san Francisco Bay that has been scaled to the same size and resolution as the Europa image. Each covers an area approximately 170 by 193 kilometers(105 by 120 miles). The red line marks the once active central crack of the Europan fault (right) and the line of the San Andreas fault (left). A strike-slip fault is one in which two crustal blocks move horizontally past one another, similar to two opposing lanes of traffic. The overall motion along the Europan fault seems to have followed a continuous narrow crack along the entire length of the feature, with a path resembling stepson a staircase crossing zones which have been pulled apart. The images show that about 50 kilometers (30 miles) of displacement have taken place along the fault. Opposite sides of the fault can be reconstructed like a puzzle, matching the shape of the sides as well as older individual cracks and ridges that had been broken by its movements. Bends in the Europan fault have allowed the surface to be pulled apart. This pulling-apart along the fault's bends created openings through which warmer, softer ice from below Europa's brittle ice shell surface, or frozen water from a possible subsurface ocean, could reach the surface. This upwelling of material formed large areas of new ice within the boundaries of the original fault. A similar pulling apart phenomenon can be observed in the geological trough surrounding California's Salton Sea, and in Death Valley and the Dead Sea. In those cases, the pulled apart regions can include upwelled materials, but may

Between Allies and Rivals: Turkey, Nuclear Weapons, and BMD

International Nuclear Information System (INIS)

Kibaroglu, Mustafa

2014-01-01

This paper discusses Turkey's attitudes vis-a-vis nuclear weapons and Ballistic Missile Defense in the light of recent developments in the Iranian nuclear program and NATO's evolving concept of extended deterrence. On the one hand, the long-standing forward deployment of US tactical nuclear weapons in Turkey and the country's role in the US Phased Adaptive Approach BMD architecture are still considered to be key elements of national security. On the other, security guarantees offered to Turkey by NATO and the US appear less and less credible in the face of rising regional threats. As this paper shows, there is a growing gap between official policy and public perceptions inside Turkey vis-a-vis the US, Iran, and nuclear weapons, as well as a growing Turkish aspiration to autonomy in its security and defense policy. While one should not expect Turkey to develop nuclear weapons anytime soon, an unchecked Iranian regional power could bring Ankara to hedge its bets in the long term. Turkey's controversial recent decision to buy a Chinese system for its national air and missile defense rather than European or US equipment should be seen in the light of this search for autonomy. (author)

Reevaluation of Turkey's hydropower potential and electric energy demand

International Nuclear Information System (INIS)

Yueksek, Omer

2008-01-01

This paper deals with Turkey's hydropower potential and its long-term electric energy demand predictions. In the paper, at first, Turkey's energy sources are briefly reviewed. Then, hydropower potential is analyzed and it has been concluded that Turkey's annual economically feasible hydropower potential is about 188 TWh, nearly 47% greater than the previous estimation figures of 128 TWh. A review on previous prediction models for Turkey's long-term electric energy demand is presented. In order to predict the future demand, new increment ratio scenarios, which depend on both observed data and future predictions of population, energy consumption per capita and total energy consumption, are developed. The results of 11 prediction models are compared and analyzed. It is concluded that Turkey's annual electric energy demand predictions in 2010, 2015 and 2020 vary between 222 and 242 (average 233) TWh; 302 and 356 (average 334) TWh; and 440 and 514 (average 476) TWh, respectively. A discussion on the role of hydropower in meeting long-term demand is also included in the paper and it has been predicted that hydropower can meet 25-35% of Turkey's electric energy demand in 2020

ESR dating of the fault rocks

International Nuclear Information System (INIS)

Lee, Hee Kwon

2005-01-01

We carried out ESR dating of fault rocks collected near the nuclear reactor. The Upcheon fault zone is exposed close to the Ulzin nuclear reactor. The space-time pattern of fault activity on the Upcheon fault deduced from ESR dating of fault gouge can be summarised as follows : this fault zone was reactivated between fault breccia derived from Cretaceous sandstone and tertiary volcanic sedimentary rocks about 2 Ma, 1.5 Ma and 1 Ma ago. After those movements, the Upcheon fault was reactivated between Cretaceous sandstone and fault breccia zone about 800 ka ago. This fault zone was reactivated again between fault breccia derived form Cretaceous sandstone and Tertiary volcanic sedimentary rocks about 650 ka and after 125 ka ago. These data suggest that the long-term(200-500 k.y.) cyclic fault activity of the Upcheon fault zone continued into the Pleistocene. In the Ulzin area, ESR dates from the NW and EW trend faults range from 800 ka to 600 ka NE and EW trend faults were reactivated about between 200 ka and 300 ka ago. On the other hand, ESR date of the NS trend fault is about 400 ka and 50 ka. Results of this research suggest the fault activity near the Ulzin nuclear reactor fault activity continued into the Pleistocene. One ESR date near the Youngkwang nuclear reactor is 200 ka

Deformation around basin scale normal faults

International Nuclear Information System (INIS)

Spahic, D.

2010-01-01

Faults in the earth crust occur within large range of scales from microscale over mesoscopic to large basin scale faults. Frequently deformation associated with faulting is not only limited to the fault plane alone, but rather forms a combination with continuous near field deformation in the wall rock, a phenomenon that is generally called fault drag. The correct interpretation and recognition of fault drag is fundamental for the reconstruction of the fault history and determination of fault kinematics, as well as prediction in areas of limited exposure or beyond comprehensive seismic resolution. Based on fault analyses derived from 3D visualization of natural examples of fault drag, the importance of fault geometry for the deformation of marker horizons around faults is investigated. The complex 3D structural models presented here are based on a combination of geophysical datasets and geological fieldwork. On an outcrop scale example of fault drag in the hanging wall of a normal fault, located at St. Margarethen, Burgenland, Austria, data from Ground Penetrating Radar (GPR) measurements, detailed mapping and terrestrial laser scanning were used to construct a high-resolution structural model of the fault plane, the deformed marker horizons and associated secondary faults. In order to obtain geometrical information about the largely unexposed master fault surface, a standard listric balancing dip domain technique was employed. The results indicate that for this normal fault a listric shape can be excluded, as the constructed fault has a geologically meaningless shape cutting upsection into the sedimentary strata. This kinematic modeling result is additionally supported by the observation of deformed horizons in the footwall of the structure. Alternatively, a planar fault model with reverse drag of markers in the hanging wall and footwall is proposed. Deformation around basin scale normal faults. A second part of this thesis investigates a large scale normal fault

How do normal faults grow?

OpenAIRE

Blækkan, Ingvild; Bell, Rebecca; Rotevatn, Atle; Jackson, Christopher; Tvedt, Anette

2018-01-01

Faults grow via a sympathetic increase in their displacement and length (isolated fault model), or by rapid length establishment and subsequent displacement accrual (constant-length fault model). To test the significance and applicability of these two models, we use time-series displacement (D) and length (L) data extracted for faults from nature and experiments. We document a range of fault behaviours, from sympathetic D-L fault growth (isolated growth) to sub-vertical D-L growth trajectorie...

Fault diagnosis of power transformer based on fault-tree analysis (FTA)

Science.gov (United States)

Wang, Yongliang; Li, Xiaoqiang; Ma, Jianwei; Li, SuoYu

2017-05-01

Power transformers is an important equipment in power plants and substations, power distribution transmission link is made an important hub of power systems. Its performance directly affects the quality and health of the power system reliability and stability. This paper summarizes the five parts according to the fault type power transformers, then from the time dimension divided into three stages of power transformer fault, use DGA routine analysis and infrared diagnostics criterion set power transformer running state, finally, according to the needs of power transformer fault diagnosis, by the general to the section by stepwise refinement of dendritic tree constructed power transformer fault

Large earthquakes and creeping faults

Science.gov (United States)

Harris, Ruth A.

2017-01-01

Faults are ubiquitous throughout the Earth's crust. The majority are silent for decades to centuries, until they suddenly rupture and produce earthquakes. With a focus on shallow continental active-tectonic regions, this paper reviews a subset of faults that have a different behavior. These unusual faults slowly creep for long periods of time and produce many small earthquakes. The presence of fault creep and the related microseismicity helps illuminate faults that might not otherwise be located in fine detail, but there is also the question of how creeping faults contribute to seismic hazard. It appears that well-recorded creeping fault earthquakes of up to magnitude 6.6 that have occurred in shallow continental regions produce similar fault-surface rupture areas and similar peak ground shaking as their locked fault counterparts of the same earthquake magnitude. The behavior of much larger earthquakes on shallow creeping continental faults is less well known, because there is a dearth of comprehensive observations. Computational simulations provide an opportunity to fill the gaps in our understanding, particularly of the dynamic processes that occur during large earthquake rupture and arrest.

A novel KFCM based fault diagnosis method for unknown faults in satellite reaction wheels.

Science.gov (United States)

Hu, Di; Sarosh, Ali; Dong, Yun-Feng

2012-03-01

Reaction wheels are one of the most critical components of the satellite attitude control system, therefore correct diagnosis of their faults is quintessential for efficient operation of these spacecraft. The known faults in any of the subsystems are often diagnosed by supervised learning algorithms, however, this method fails to work correctly when a new or unknown fault occurs. In such cases an unsupervised learning algorithm becomes essential for obtaining the correct diagnosis. Kernel Fuzzy C-Means (KFCM) is one of the unsupervised algorithms, although it has its own limitations; however in this paper a novel method has been proposed for conditioning of KFCM method (C-KFCM) so that it can be effectively used for fault diagnosis of both known and unknown faults as in satellite reaction wheels. The C-KFCM approach involves determination of exact class centers from the data of known faults, in this way discrete number of fault classes are determined at the start. Similarity parameters are derived and determined for each of the fault data point. Thereafter depending on the similarity threshold each data point is issued with a class label. The high similarity points fall into one of the 'known-fault' classes while the low similarity points are labeled as 'unknown-faults'. Simulation results show that as compared to the supervised algorithm such as neural network, the C-KFCM method can effectively cluster historical fault data (as in reaction wheels) and diagnose the faults to an accuracy of more than 91%. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Complete sequence of RNA1 of grapevine Anatolian ringspot virus.

Science.gov (United States)

Digiaro, Michele; Nahdi, Sabrine; Elbeaino, Toufic

2012-10-01

The nucleotide sequence of RNA1 of grapevine Anatolian ringspot virus (GARSV), a nepovirus of subgroup B, was determined from cDNA clones. It is 7,288 nucleotides in length excluding the 3' terminal poly(A) tail and contains a large open reading frame (ORF), extending from nucleotides 272 to 7001, encoding a polypeptide of 2,243 amino acids with a predicted molecular mass of 250 kDa. The primary structure of the polyprotein, compared with that of other viral polyproteins, revealed the presence of all the characteristic domains of members of the order Picornavirales, i.e., the NTP-binding protein (1B(Hel)), the viral genome-linked protein (1C(VPg)), the proteinase (1D(Prot)), the RNA-dependent RNA polymerase (1E(Pol)), and of the protease cofactor (1A(Pro-cof)) shared by members of the subfamily Comovirinae within the family Secoviridae. The cleavage sites predicted within the polyprotein were found to be in agreement with those previously reported for nepoviruses of subgroup B, processing from 1A to 1E proteins of 67, 64, 3, 23 and 92 kDa, respectively. The RNA1-encoded polyprotein (p1) shared the highest amino acid sequence identity (66 %) with tomato black ring virus (TBRV) and beet ringspot virus (BRSV). The 5'- and 3'-noncoding regions (NCRs) of GARSV-RNA1 shared 89 % and 95 % nucleotide sequence identity respectively with the corresponding regions in RNA2. Phylogenetic analysis confirmed the close relationship of GARSV to members of subgroup B of the genus Nepovirus.

Hydropower and biomass as renewable energy sources in Turkey

International Nuclear Information System (INIS)

Kaygusuz, K.

2001-01-01

When talking about renewable energy sources today, the most important and economical energy sources for Turkey are hydropower and biomass.The present study gives a review of production, consumption, and economics of hydropower and biomass as renewable energy sources in Turkey. Turkey has a total gross hydropower potential of 433 GW, but only 125 GW of the total hydroelectric potential of Turkey can be economically used. By the commissioning of new hydropower plants, which are under construction, 36% of the economically usable potential of the country could be tapped. On the other hand, biomass (wood and wastes) energy is the second most important renewable energy source for Turkey. However, the biomass energy sources of Turkey are limited. In 1998, the biomass share of the total energy consumption of the country is 10%. In this study, the potential of important biomass energy sources and animal solid wastes of the country were determined. The effects of hydropower and biomass usage on the environment were also discussed. Considering total cereal products and fatty seed plants, approximately 50-60 million tons per year of biomass and 8-10 million tons of solid matter animal waste are produced, and 70% of total biomass is seen as being usable for energy. Some useful suggestions and recommendations are also presented. The present study shows that there is an important potential for hydropower and biomass energy sources in Turkey. (author)

Identifying Conventionally Sub-Seismic Faults in Polygonal Fault Systems

Science.gov (United States)

Fry, C.; Dix, J.

2017-12-01

Polygonal Fault Systems (PFS) are prevalent in hydrocarbon basins globally and represent potential fluid pathways. However the characterization of these pathways is subject to the limitations of conventional 3D seismic imaging; only capable of resolving features on a decametre scale horizontally and metres scale vertically. While outcrop and core examples can identify smaller features, they are limited by the extent of the exposures. The disparity between these scales can allow for smaller faults to be lost in a resolution gap which could mean potential pathways are left unseen. Here the focus is upon PFS from within the London Clay, a common bedrock that is tunnelled into and bears construction foundations for much of London. It is a continuation of the Ieper Clay where PFS were first identified and is found to approach the seafloor within the Outer Thames Estuary. This allows for the direct analysis of PFS surface expressions, via the use of high resolution 1m bathymetric imaging in combination with high resolution seismic imaging. Through use of these datasets surface expressions of over 1500 faults within the London Clay have been identified, with the smallest fault measuring 12m and the largest at 612m in length. The displacements over these faults established from both bathymetric and seismic imaging ranges from 30cm to a couple of metres, scales that would typically be sub-seismic for conventional basin seismic imaging. The orientations and dimensions of the faults within this network have been directly compared to 3D seismic data of the Ieper Clay from the offshore Dutch sector where it exists approximately 1km below the seafloor. These have typical PFS attributes with lengths of hundreds of metres to kilometres and throws of tens of metres, a magnitude larger than those identified in the Outer Thames Estuary. The similar orientations and polygonal patterns within both locations indicates that the smaller faults exist within typical PFS structure but are

Migration Crisis and New Opportunities for Turkey

Directory of Open Access Journals (Sweden)

Natalia A. Miheev

2016-01-01

Full Text Available The article discusses some aspects of the relationship of the European Union and Turkey. Against the backdrop of the immigration crisis, that has gripped almost all countries in Europe, the EU states were forced to appeal to the Turkish Government for assistance. Europe requested to withhold part of the f refugees on the territory of Turkey. The EU promised financial support. The Government of RecepTayyip Erdogan linked problems with the issue of refugees entering the country in the EU. The author analyzes the possibility of positive promotion of the negotiation process on Turkey's EU membership. Focuses on the settlement of the Cyprus problem, as one of the three major political obstacles to Turkey in Europe. We are seeing a situation in which EU political circles are willing to exert pressure on the Cyprus conflict and to push for the signing of a formal treaty on the settlement of problem. Some progress in the negotiation process between the communities of Cyprus EU starts to participate in the negotiations on Cyprus, together with the United Nations. Creates good conditions for the settlement of the conflict. Such a way of resolving the long-standing territorial-community conflict creates much more new problems on the island. Obstacles to the integration of Turkey into the EU will become even more.

Influence of fault steps on rupture termination of strike-slip earthquake faults

Science.gov (United States)

Li, Zhengfang; Zhou, Bengang

2018-03-01

A statistical analysis was completed on the rupture data of 29 historical strike-slip earthquakes across the world. The purpose of this study is to examine the effects of fault steps on the rupture termination of these events. The results show good correlations between the type and length of steps with the seismic rupture and a poor correlation between the step number and seismic rupture. For different magnitude intervals, the smallest widths of the fault steps (Lt) that can terminate the rupture propagation are variable: Lt = 3 km for Ms 6.5 6.9, Lt = 4 km for Ms 7.0 7.5, Lt = 6 km for Ms 7.5 8.0, and Lt = 8 km for Ms 8.0 8.5. The dilational fault step is easier to rupture through than the compression fault step. The smallest widths of the fault step for the rupture arrest can be used as an indicator to judge the scale of the rupture termination of seismic faults. This is helpful for research on fault segmentation, as well as estimating the magnitude of potential earthquakes, and is thus of significance for the assessment of seismic risks.

Integrating Near Fault Observatories (NFO) for EPOS Implementation Phase

Science.gov (United States)

Chiaraluce, Lauro

2015-04-01

Following the European Plate Observing System (EPOS) project vision aimed at creating a pan-European infrastructure for Earth sciences to support science for a more sustainable society, we are working on the integration of Near-Fault Observatories (NFOs). NFOs are state of the art research infrastructures consisting of advanced networks of multi-parametric sensors continuously monitoring the chemical and physical processes related to the common underlying earth instabilities governing active faults evolution and the genesis of earthquakes. Such a methodological approach, currently applicable only at the local scale (areas of tens to few hundreds of kilometres), is based on extremely dense networks and less common instruments deserving an extraordinary work on data quality control and multi-parameter data description. These networks in fact usually complement regional seismic and geodetic networks (typically with station spacing of 50-100km) with high-density distributions of seismic, geodetic, geochemical and geophysical sensors located typically within 10-20 km of active faults where large earthquakes are expected in the future. In the initial phase of EPOS-IP, seven NFO nodes will be linked: the Alto Tiberina and Irpinia Observatories in Italy, the Corinth Observatory in Greece, the South-Iceland Seismic Zone, the Valais Observatory in Switzerland, Marmara Sea GEO Supersite in Turkey (EU MARSite) and the Vrancea Observatory in Romania. Our work is aimed at establishing standards and integration within this first core group of NFOs while other NFOs are expected to be installed in the next years adopting the standards established and developed within the EPOS Thematic Core Services (TCS). The goal of our group is to build upon the initial development supported by these few key national observatories coordinated under previous EU projects (NERA and REAKT), inclusive and harmonised TCS supporting the installation over the next decade of tens of near-fault

Fault diagnosis of sensor networked structures with multiple faults using a virtual beam based approach

Science.gov (United States)

Wang, H.; Jing, X. J.

2017-07-01

This paper presents a virtual beam based approach suitable for conducting diagnosis of multiple faults in complex structures with limited prior knowledge of the faults involved. The "virtual beam", a recently-proposed concept for fault detection in complex structures, is applied, which consists of a chain of sensors representing a vibration energy transmission path embedded in the complex structure. Statistical tests and adaptive threshold are particularly adopted for fault detection due to limited prior knowledge of normal operational conditions and fault conditions. To isolate the multiple faults within a specific structure or substructure of a more complex one, a 'biased running' strategy is developed and embedded within the bacterial-based optimization method to construct effective virtual beams and thus to improve the accuracy of localization. The proposed method is easy and efficient to implement for multiple fault localization with limited prior knowledge of normal conditions and faults. With extensive experimental results, it is validated that the proposed method can localize both single fault and multiple faults more effectively than the classical trust index subtract on negative add on positive (TI-SNAP) method.

Study of fault diagnosis software design for complex system based on fault tree

International Nuclear Information System (INIS)

Yuan Run; Li Yazhou; Wang Jianye; Hu Liqin; Wang Jiaqun; Wu Yican

2012-01-01

Complex systems always have high-level reliability and safety requirements, and same does their diagnosis work. As a great deal of fault tree models have been acquired during the design and operation phases, a fault diagnosis method which combines fault tree analysis with knowledge-based technology has been proposed. The prototype of fault diagnosis software has been realized and applied to mobile LIDAR system. (authors)

Illite authigenesis during faulting and fluid flow - a microstructural study of fault rocks

Science.gov (United States)

Scheiber, Thomas; Viola, Giulio; van der Lelij, Roelant; Margreth, Annina

2017-04-01

Authigenic illite can form synkinematically during slip events along brittle faults. In addition it can also crystallize as a result of fluid flow and associated mineral alteration processes in hydrothermal environments. K-Ar dating of illite-bearing fault rocks has recently become a common tool to constrain the timing of fault activity. However, to fully interpret the derived age spectra in terms of deformation ages, a careful investigation of the fault deformation history and architecture at the outcrop-scale, ideally followed by a detailed mineralogical analysis of the illite-forming processes at the micro-scale, are indispensable. Here we integrate this methodological approach by presenting microstructural observations from the host rock immediately adjacent to dated fault gouges from two sites located in the Rolvsnes granodiorite (Bømlo, western Norway). This granodiorite experienced multiple episodes of brittle faulting and fluid-induced alteration, starting in the Mid Ordovician (Scheiber et al., 2016). Fault gouges are predominantly associated with normal faults accommodating mainly E-W extension. K-Ar dating of illites separated from representative fault gouges constrains deformation and alteration due to fluid ingress from the Permian to the Cretaceous, with a cluster of ages for the finest (middle Jurassic. At site one, high-resolution thin section structural mapping reveals a complex deformation history characterized by several coexisting types of calcite veins and seven different generations of cataclasite, two of which contain a significant amount of authigenic and undoubtedly deformation-related illite. At site two, fluid ingress along and adjoining the fault core induced pervasive alteration of the host granodiorite. Quartz is crosscut by calcite veinlets whereas plagioclase, K-feldspar and biotite are almost completely replaced by the main alteration products kaolin, quartz and illite. Illite-bearing micro-domains were physically separated by

How fault evolution changes strain partitioning and fault slip rates in Southern California: Results from geodynamic modeling

Science.gov (United States)

Ye, Jiyang; Liu, Mian

2017-08-01

In Southern California, the Pacific-North America relative plate motion is accommodated by the complex southern San Andreas Fault system that includes many young faults (faults and their impact on strain partitioning and fault slip rates are important for understanding the evolution of this plate boundary zone and assessing earthquake hazard in Southern California. Using a three-dimensional viscoelastoplastic finite element model, we have investigated how this plate boundary fault system has evolved to accommodate the relative plate motion in Southern California. Our results show that when the plate boundary faults are not optimally configured to accommodate the relative plate motion, strain is localized in places where new faults would initiate to improve the mechanical efficiency of the fault system. In particular, the Eastern California Shear Zone, the San Jacinto Fault, the Elsinore Fault, and the offshore dextral faults all developed in places of highly localized strain. These younger faults compensate for the reduced fault slip on the San Andreas Fault proper because of the Big Bend, a major restraining bend. The evolution of the fault system changes the apportionment of fault slip rates over time, which may explain some of the slip rate discrepancy between geological and geodetic measurements in Southern California. For the present fault configuration, our model predicts localized strain in western Transverse Ranges and along the dextral faults across the Mojave Desert, where numerous damaging earthquakes occurred in recent years.

Turkey's EU Quest and Political Cleavages under AKP

DEFF Research Database (Denmark)

Rahigh-Aghsan, Ali

2011-01-01

This article analyses the extent to which the rise of political Islam (Note 1) in Turkey has triggered an intense and polarized debate about the principle eligibility of Turkey to be a full European Union (EU) member state. The Justice and Development Party’s (Adalet ve Kalkinma Partisi......) The overall political targets of political Islam in Turkey seems less compatible with the traditional Turkish EU quest than formerly (2) The Turkish political Islamic turnaround is contributing to a climate of increasing scepticism in Europe, and presents significant obstacles to EU accession. As a result...

ESR dating of fault rocks

International Nuclear Information System (INIS)

Lee, Hee Kwon

2003-02-01

Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then grow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs. grain size shows a plateau for grains below critical size; these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected near the Gori nuclear reactor. Most of the ESR signals of fault rocks collected from the basement are saturated. This indicates that the last movement of the faults had occurred before the Quaternary period. However, ESR dates from the Oyong fault zone range from 370 to 310 ka. Results of this research suggest that long-term cyclic fault activity of the Oyong fault zone continued into the Pleistocene

ESR dating of fault rocks

Energy Technology Data Exchange (ETDEWEB)

Lee, Hee Kwon [Kangwon National Univ., Chuncheon (Korea, Republic of)

2003-02-15

Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then grow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs. grain size shows a plateau for grains below critical size; these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected near the Gori nuclear reactor. Most of the ESR signals of fault rocks collected from the basement are saturated. This indicates that the last movement of the faults had occurred before the Quaternary period. However, ESR dates from the Oyong fault zone range from 370 to 310 ka. Results of this research suggest that long-term cyclic fault activity of the Oyong fault zone continued into the Pleistocene.

Differentiation of Anatolian honey samples from different botanical origins by ATR-FTIR spectroscopy using multivariate analysis.

Science.gov (United States)

Gok, Seher; Severcan, Mete; Goormaghtigh, Erik; Kandemir, Irfan; Severcan, Feride

2015-03-01

Botanical origin of the nectar predominantly affects the chemical composition of honey. Analytical techniques used for reliable honey authentication are mostly time consuming and expensive. Additionally, they cannot provide 100% efficiency in accurate authentication. Therefore, alternatives for the determination of floral origin of honey need to be developed. This study aims to discriminate characteristic Anatolian honey samples from different botanical origins based on the differences in their molecular content, rather than giving numerical information about the constituents of samples. Another scope of the study is to differentiate inauthentic honey samples from the natural ones precisely. All samples were tested via unsupervised pattern recognition procedures like hierarchical clustering and Principal Component Analysis (PCA). Discrimination of sample groups was achieved successfully with hierarchical clustering over the spectral range of 1800-750 cm(-1) which suggests a good predictive capability of Fourier Transform Infrared (FTIR) spectroscopy and chemometry for the determination of honey floral source. Copyright © 2014 Elsevier Ltd. All rights reserved.

Fault-tolerant architecture: Evaluation methodology

International Nuclear Information System (INIS)

Battle, R.E.; Kisner, R.A.

1992-08-01

The design and reliability of four fault-tolerant architectures that may be used in nuclear power plant control systems were evaluated. Two architectures are variations of triple-modular-redundant (TMR) systems, and two are variations of dual redundant systems. The evaluation includes a review of methods of implementing fault-tolerant control, the importance of automatic recovery from failures, methods of self-testing diagnostics, block diagrams of typical fault-tolerant controllers, review of fault-tolerant controllers operating in nuclear power plants, and fault tree reliability analyses of fault-tolerant systems

HOT Faults", Fault Organization, and the Occurrence of the Largest Earthquakes

Science.gov (United States)

Carlson, J. M.; Hillers, G.; Archuleta, R. J.

2006-12-01

We apply the concept of "Highly Optimized Tolerance" (HOT) for the investigation of spatio-temporal seismicity evolution, in particular mechanisms associated with largest earthquakes. HOT provides a framework for investigating both qualitative and quantitative features of complex feedback systems that are far from equilibrium and punctuated by rare, catastrophic events. In HOT, robustness trade-offs lead to complexity and power laws in systems that are coupled to evolving environments. HOT was originally inspired by biology and engineering, where systems are internally very highly structured, through biological evolution or deliberate design, and perform in an optimum manner despite fluctuations in their surroundings. Though faults and fault systems are not designed in ways comparable to biological and engineered structures, feedback processes are responsible in a conceptually comparable way for the development, evolution and maintenance of younger fault structures and primary slip surfaces of mature faults, respectively. Hence, in geophysical applications the "optimization" approach is perhaps more aptly replaced by "organization", reflecting the distinction between HOT and random, disorganized configurations, and highlighting the importance of structured interdependencies that evolve via feedback among and between different spatial and temporal scales. Expressed in the terminology of the HOT concept, mature faults represent a configuration optimally organized for the release of strain energy; whereas immature, more heterogeneous fault networks represent intermittent, suboptimal systems that are regularized towards structural simplicity and the ability to generate large earthquakes more easily. We discuss fault structure and associated seismic response pattern within the HOT concept, and outline fundamental differences between this novel interpretation to more orthodox viewpoints like the criticality concept. The discussion is flanked by numerical simulations of a

Fault Analysis in Solar Photovoltaic Arrays

Science.gov (United States)

Zhao, Ye

Fault analysis in solar photovoltaic (PV) arrays is a fundamental task to increase reliability, efficiency and safety in PV systems. Conventional fault protection methods usually add fuses or circuit breakers in series with PV components. But these protection devices are only able to clear faults and isolate faulty circuits if they carry a large fault current. However, this research shows that faults in PV arrays may not be cleared by fuses under some fault scenarios, due to the current-limiting nature and non-linear output characteristics of PV arrays. First, this thesis introduces new simulation and analytic models that are suitable for fault analysis in PV arrays. Based on the simulation environment, this thesis studies a variety of typical faults in PV arrays, such as ground faults, line-line faults, and mismatch faults. The effect of a maximum power point tracker on fault current is discussed and shown to, at times, prevent the fault current protection devices to trip. A small-scale experimental PV benchmark system has been developed in Northeastern University to further validate the simulation conclusions. Additionally, this thesis examines two types of unique faults found in a PV array that have not been studied in the literature. One is a fault that occurs under low irradiance condition. The other is a fault evolution in a PV array during night-to-day transition. Our simulation and experimental results show that overcurrent protection devices are unable to clear the fault under "low irradiance" and "night-to-day transition". However, the overcurrent protection devices may work properly when the same PV fault occurs in daylight. As a result, a fault under "low irradiance" and "night-to-day transition" might be hidden in the PV array and become a potential hazard for system efficiency and reliability.

Aftershocks illuminate the 2011 Mineral, Virginia, earthquake causative fault zone and nearby active faults

Science.gov (United States)

Horton, J. Wright; Shah, Anjana K.; McNamara, Daniel E.; Snyder, Stephen L.; Carter, Aina M

2015-01-01

Deployment of temporary seismic stations after the 2011 Mineral, Virginia (USA), earthquake produced a well-recorded aftershock sequence. The majority of aftershocks are in a tabular cluster that delineates the previously unknown Quail fault zone. Quail fault zone aftershocks range from ~3 to 8 km in depth and are in a 1-km-thick zone striking ~036° and dipping ~50°SE, consistent with a 028°, 50°SE main-shock nodal plane having mostly reverse slip. This cluster extends ~10 km along strike. The Quail fault zone projects to the surface in gneiss of the Ordovician Chopawamsic Formation just southeast of the Ordovician–Silurian Ellisville Granodiorite pluton tail. The following three clusters of shallow (<3 km) aftershocks illuminate other faults. (1) An elongate cluster of early aftershocks, ~10 km east of the Quail fault zone, extends 8 km from Fredericks Hall, strikes ~035°–039°, and appears to be roughly vertical. The Fredericks Hall fault may be a strand or splay of the older Lakeside fault zone, which to the south spans a width of several kilometers. (2) A cluster of later aftershocks ~3 km northeast of Cuckoo delineates a fault near the eastern contact of the Ordovician Quantico Formation. (3) An elongate cluster of late aftershocks ~1 km northwest of the Quail fault zone aftershock cluster delineates the northwest fault (described herein), which is temporally distinct, dips more steeply, and has a more northeastward strike. Some aftershock-illuminated faults coincide with preexisting units or structures evident from radiometric anomalies, suggesting tectonic inheritance or reactivation.

Paleoseismicity of two historically quiescent faults in Australia: Implications for fault behavior in stable continental regions

Science.gov (United States)

Crone, A.J.; De Martini, P. M.; Machette, M.M.; Okumura, K.; Prescott, J.R.

2003-01-01

Paleoseismic studies of two historically aseismic Quaternary faults in Australia confirm that cratonic faults in stable continental regions (SCR) typically have a long-term behavior characterized by episodes of activity separated by quiescent intervals of at least 10,000 and commonly 100,000 years or more. Studies of the approximately 30-km-long Roopena fault in South Australia and the approximately 30-km-long Hyden fault in Western Australia document multiple Quaternary surface-faulting events that are unevenly spaced in time. The episodic clustering of events on cratonic SCR faults may be related to temporal fluctuations of fault-zone fluid pore pressures in a volume of strained crust. The long-term slip rate on cratonic SCR faults is extremely low, so the geomorphic expression of many cratonic SCR faults is subtle, and scarps may be difficult to detect because they are poorly preserved. Both the Roopena and Hyden faults are in areas of limited or no significant seismicity; these and other faults that we have studied indicate that many potentially hazardous SCR faults cannot be recognized solely on the basis of instrumental data or historical earthquakes. Although cratonic SCR faults may appear to be nonhazardous because they have been historically aseismic, those that are favorably oriented for movement in the current stress field can and have produced unexpected damaging earthquakes. Paleoseismic studies of modern and prehistoric SCR faulting events provide the basis for understanding of the long-term behavior of these faults and ultimately contribute to better seismic-hazard assessments.

Misbheaving Faults: The Expanding Role of Geodetic Imaging in Unraveling Unexpected Fault Slip Behavior

Science.gov (United States)

Barnhart, W. D.; Briggs, R.

2015-12-01

Geodetic imaging techniques enable researchers to "see" details of fault rupture that cannot be captured by complementary tools such as seismology and field studies, thus providing increasingly detailed information about surface strain, slip kinematics, and how an earthquake may be transcribed into the geological record. For example, the recent Haiti, Sierra El Mayor, and Nepal earthquakes illustrate the fundamental role of geodetic observations in recording blind ruptures where purely geological and seismological studies provided incomplete views of rupture kinematics. Traditional earthquake hazard analyses typically rely on sparse paleoseismic observations and incomplete mapping, simple assumptions of slip kinematics from Andersonian faulting, and earthquake analogs to characterize the probabilities of forthcoming ruptures and the severity of ground accelerations. Spatially dense geodetic observations in turn help to identify where these prevailing assumptions regarding fault behavior break down and highlight new and unexpected kinematic slip behavior. Here, we focus on three key contributions of space geodetic observations to the analysis of co-seismic deformation: identifying near-surface co-seismic slip where no easily recognized fault rupture exists; discerning non-Andersonian faulting styles; and quantifying distributed, off-fault deformation. The 2013 Balochistan strike slip earthquake in Pakistan illuminates how space geodesy precisely images non-Andersonian behavior and off-fault deformation. Through analysis of high-resolution optical imagery and DEMs, evidence emerges that a single fault map slip as both a strike slip and dip slip fault across multiple seismic cycles. These observations likewise enable us to quantify on-fault deformation, which account for ~72% of the displacements in this earthquake. Nonetheless, the spatial distribution of on- and off-fault deformation in this event is highly spatially variable- a complicating factor for comparisons

Turkey and natural gas

International Nuclear Information System (INIS)

Yardim, G.

1992-01-01

Turkey is a developing country with a population of 56 millions and approximately $ 2604 per capita income. Geographically she is located among the energy rich countries whereas almost half of her energy requirement is met by imports. Turkey is relatively well endowed with hydro-power and lignite resources, some limited amount of oil, gas and coal resources exist and there is significant geothermal potential in the country. Environmental issues are increasingly important consideration in energy policy decisions in the world. Energy production, transportation and use are contributing to environmental degradation to a certain extent. Protection of the environment and public health from pollution arising from energy production and consumption activities is one of the principles of Turkish national energy policy. In conjunction with this policy the 'Environment Law' was promulgated in 1983 and 'The Regulation on Protection of the Air Quality' in order to control all kinds of emissions in the form of soot, smoke, fines and particulate and to prevent the adverse impacts of the air pollution, was issued in October 1986. Policy of diversification of energy sources and the environmental issues which were explained above brought the natural gas usage into the energy scene in Turkey. 6 figs., 4 tabs

Extreme Forms of Child Labour in Turkey

Science.gov (United States)

Degirmencioglu, Serdar M.; Acar, Hakan; Acar, Yuksel Baykara

2008-01-01

Two little known forms of child labour in Turkey are examined. The process through which these children are made to work has parallels with the experiences of slaves. First, a long-standing practice from Northwestern Turkey of parents hiring children to better-off farmers is examined. Further, a more recent problem is examined where children are…

Higher Education Policies and Overeducation in Turkey

Science.gov (United States)

Habibi, Nader

2017-01-01

In the past two decades Turkey has experienced a rapid increase in higher education student enrollment. This sharp increase in access to higher education has satisfied a strong social demand for university education but it has led to a growing surplus of university graduates who cannot find adequate jobs. As a result Turkey has entered an…

Distribution network fault section identification and fault location using artificial neural network

DEFF Research Database (Denmark)

Dashtdar, Masoud; Dashti, Rahman; Shaker, Hamid Reza

2018-01-01

In this paper, a method for fault location in power distribution network is presented. The proposed method uses artificial neural network. In order to train the neural network, a series of specific characteristic are extracted from the recorded fault signals in relay. These characteristics...... components of the sequences as well as three-phase signals could be obtained using statistics to extract the hidden features inside them and present them separately to train the neural network. Also, since the obtained inputs for the training of the neural network strongly depend on the fault angle, fault...... resistance, and fault location, the training data should be selected such that these differences are properly presented so that the neural network does not face any issues for identification. Therefore, selecting the signal processing function, data spectrum and subsequently, statistical parameters...

Loading of the San Andreas fault by flood-induced rupture of faults beneath the Salton Sea

Science.gov (United States)

Brothers, Daniel; Kilb, Debi; Luttrell, Karen; Driscoll, Neal W.; Kent, Graham

2011-01-01

The southern San Andreas fault has not experienced a large earthquake for approximately 300 years, yet the previous five earthquakes occurred at ~180-year intervals. Large strike-slip faults are often segmented by lateral stepover zones. Movement on smaller faults within a stepover zone could perturb the main fault segments and potentially trigger a large earthquake. The southern San Andreas fault terminates in an extensional stepover zone beneath the Salton Sea—a lake that has experienced periodic flooding and desiccation since the late Holocene. Here we reconstruct the magnitude and timing of fault activity beneath the Salton Sea over several earthquake cycles. We observe coincident timing between flooding events, stepover fault displacement and ruptures on the San Andreas fault. Using Coulomb stress models, we show that the combined effect of lake loading, stepover fault movement and increased pore pressure could increase stress on the southern San Andreas fault to levels sufficient to induce failure. We conclude that rupture of the stepover faults, caused by periodic flooding of the palaeo-Salton Sea and by tectonic forcing, had the potential to trigger earthquake rupture on the southern San Andreas fault. Extensional stepover zones are highly susceptible to rapid stress loading and thus the Salton Sea may be a nucleation point for large ruptures on the southern San Andreas fault.

Fault Detection for Industrial Processes

Directory of Open Access Journals (Sweden)

Yingwei Zhang

2012-01-01

Full Text Available A new fault-relevant KPCA algorithm is proposed. Then the fault detection approach is proposed based on the fault-relevant KPCA algorithm. The proposed method further decomposes both the KPCA principal space and residual space into two subspaces. Compared with traditional statistical techniques, the fault subspace is separated based on the fault-relevant influence. This method can find fault-relevant principal directions and principal components of systematic subspace and residual subspace for process monitoring. The proposed monitoring approach is applied to Tennessee Eastman process and penicillin fermentation process. The simulation results show the effectiveness of the proposed method.

Numerical modelling of the mechanical and fluid flow properties of fault zones - Implications for fault seal analysis

NARCIS (Netherlands)

Heege, J.H. ter; Wassing, B.B.T.; Giger, S.B.; Clennell, M.B.

2009-01-01

Existing fault seal algorithms are based on fault zone composition and fault slip (e.g., shale gouge ratio), or on fault orientations within the contemporary stress field (e.g., slip tendency). In this study, we aim to develop improved fault seal algorithms that account for differences in fault zone

The mechanics of fault-bend folding and tear-fault systems in the Niger Delta

Science.gov (United States)

Benesh, Nathan Philip

This dissertation investigates the mechanics of fault-bend folding using the discrete element method (DEM) and explores the nature of tear-fault systems in the deep-water Niger Delta fold-and-thrust belt. In Chapter 1, we employ the DEM to investigate the development of growth structures in anticlinal fault-bend folds. This work was inspired by observations that growth strata in active folds show a pronounced upward decrease in bed dip, in contrast to traditional kinematic fault-bend fold models. Our analysis shows that the modeled folds grow largely by parallel folding as specified by the kinematic theory; however, the process of folding over a broad axial surface zone yields a component of fold growth by limb rotation that is consistent with the patterns observed in natural folds. This result has important implications for how growth structures can he used to constrain slip and paleo-earthquake ages on active blind-thrust faults. In Chapter 2, we expand our DEM study to investigate the development of a wider range of fault-bend folds. We examine the influence of mechanical stratigraphy and quantitatively compare our models with the relationships between fold and fault shape prescribed by the kinematic theory. While the synclinal fault-bend models closely match the kinematic theory, the modeled anticlinal fault-bend folds show robust behavior that is distinct from the kinematic theory. Specifically, we observe that modeled structures maintain a linear relationship between fold shape (gamma) and fault-horizon cutoff angle (theta), rather than expressing the non-linear relationship with two distinct modes of anticlinal folding that is prescribed by the kinematic theory. These observations lead to a revised quantitative relationship for fault-bend folds that can serve as a useful interpretation tool. Finally, in Chapter 3, we examine the 3D relationships of tear- and thrust-fault systems in the western, deep-water Niger Delta. Using 3D seismic reflection data and new

Active faults, paleoseismology, and historical fault rupture in northern Wairarapa, North Island, New Zealand

International Nuclear Information System (INIS)

Schermer, E.R.; Van Dissen, R.; Berryman, K.R.; Kelsey, H.M.; Cashman, S.M.

2004-01-01

Active faulting in the upper plate of the Hikurangi subduction zone, North Island, New Zealand, represents a significant seismic hazard that is not yet well understood. In northern Wairarapa, the geometry and kinematics of active faults, and the Quaternary and historical surface-rupture record, have not previously been studied in detail. We present the results of mapping and paleoseismicity studies on faults in the northern Wairarapa region to document the characteristics of active faults and the timing of earthquakes. We focus on evidence for surface rupture in the 1855 Wairarapa (M w 8.2) and 1934 Pahiatua (M w 7.4) earthquakes, two of New Zealand's largest historical earthquakes. The Dreyers Rock, Alfredton, Saunders Road, Waitawhiti, and Waipukaka faults form a northeast-trending, east-stepping array of faults. Detailed mapping of offset geomorphic features shows the rupture lengths vary from c. 7 to 20 km and single-event displacements range from 3 to 7 m, suggesting the faults are capable of generating M >7 earthquakes. Trenching results show that two earthquakes have occurred on the Alfredton Fault since c. 2900 cal. BP. The most recent event probably occurred during the 1855 Wairarapa earthquake as slip propagated northward from the Wairarapa Fault and across a 6 km wide step. Waipukaka Fault trenches show that at least three surface-rupturing earthquakes have occurred since 8290-7880 cal. BP. Analysis of stratigraphic and historical evidence suggests the most recent rupture occurred during the 1934 Pahiatua earthquake. Estimates of slip rates provided by these data suggest that a larger component of strike slip than previously suspected is occurring within the upper plate and that the faults accommodate a significant proportion of the dextral component of oblique subduction. Assessment of seismic hazard is difficult because the known fault scarp lengths appear too short to have accommodated the estimated single-event displacements. Faults in the region are

Sustainable energy, environmental and agricultural policies in Turkey

International Nuclear Information System (INIS)

Kaygusuz, Kamil

2010-01-01

Turkey's demand for energy and electricity is increasing rapidly and heavily dependent on expensive imported energy resources that place a big burden on the economy and air pollution is becoming a great environmental concern in the country. As would be expected, the rapid expansion of energy production and consumption has brought with it a wide range of environmental issues at the local, regional and global levels. With respect to global environmental issues, Turkey's carbon dioxide (CO 2 ) emissions have grown along with its energy-consumption. States have played a leading role in protecting the environment by reducing emissions of greenhouse gases (GHGs). In this regard, renewable energy resources appear to be the one of the most efficient and effective solutions for clean and sustainable energy development in Turkey. Turkey's geographical location has several advantages for extensive use of most of these renewable energy sources.

Fault prediction for nonlinear stochastic system with incipient faults based on particle filter and nonlinear regression.

Science.gov (United States)

Ding, Bo; Fang, Huajing

2017-05-01

This paper is concerned with the fault prediction for the nonlinear stochastic system with incipient faults. Based on the particle filter and the reasonable assumption about the incipient faults, the modified fault estimation algorithm is proposed, and the system state is estimated simultaneously. According to the modified fault estimation, an intuitive fault detection strategy is introduced. Once each of the incipient fault is detected, the parameters of which are identified by a nonlinear regression method. Then, based on the estimated parameters, the future fault signal can be predicted. Finally, the effectiveness of the proposed method is verified by the simulations of the Three-tank system. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

High-Intensity Radiated Field Fault-Injection Experiment for a Fault-Tolerant Distributed Communication System

Science.gov (United States)

Yates, Amy M.; Torres-Pomales, Wilfredo; Malekpour, Mahyar R.; Gonzalez, Oscar R.; Gray, W. Steven

2010-01-01

Safety-critical distributed flight control systems require robustness in the presence of faults. In general, these systems consist of a number of input/output (I/O) and computation nodes interacting through a fault-tolerant data communication system. The communication system transfers sensor data and control commands and can handle most faults under typical operating conditions. However, the performance of the closed-loop system can be adversely affected as a result of operating in harsh environments. In particular, High-Intensity Radiated Field (HIRF) environments have the potential to cause random fault manifestations in individual avionic components and to generate simultaneous system-wide communication faults that overwhelm existing fault management mechanisms. This paper presents the design of an experiment conducted at the NASA Langley Research Center's HIRF Laboratory to statistically characterize the faults that a HIRF environment can trigger on a single node of a distributed flight control system.

Development of Fault Models for Hybrid Fault Detection and Diagnostics Algorithm: October 1, 2014 -- May 5, 2015

Energy Technology Data Exchange (ETDEWEB)

Cheung, Howard [Purdue Univ., West Lafayette, IN (United States); Braun, James E. [Purdue Univ., West Lafayette, IN (United States)

2015-12-31

This report describes models of building faults created for OpenStudio to support the ongoing development of fault detection and diagnostic (FDD) algorithms at the National Renewable Energy Laboratory. Building faults are operating abnormalities that degrade building performance, such as using more energy than normal operation, failing to maintain building temperatures according to the thermostat set points, etc. Models of building faults in OpenStudio can be used to estimate fault impacts on building performance and to develop and evaluate FDD algorithms. The aim of the project is to develop fault models of typical heating, ventilating and air conditioning (HVAC) equipment in the United States, and the fault models in this report are grouped as control faults, sensor faults, packaged and split air conditioner faults, water-cooled chiller faults, and other uncategorized faults. The control fault models simulate impacts of inappropriate thermostat control schemes such as an incorrect thermostat set point in unoccupied hours and manual changes of thermostat set point due to extreme outside temperature. Sensor fault models focus on the modeling of sensor biases including economizer relative humidity sensor bias, supply air temperature sensor bias, and water circuit temperature sensor bias. Packaged and split air conditioner fault models simulate refrigerant undercharging, condenser fouling, condenser fan motor efficiency degradation, non-condensable entrainment in refrigerant, and liquid line restriction. Other fault models that are uncategorized include duct fouling, excessive infiltration into the building, and blower and pump motor degradation.

Economic impact assessment of Turkey's post-Kyoto vision on emission trading

International Nuclear Information System (INIS)

Akın Olçum, Gökçe; Yeldan, Erinç

2013-01-01

For the post-Kyoto period, Turkey strongly emphasizes the establishment of national emission trading system by 2015 and its integration with the EU ETS along its accession process to the EU. In this paper, we study the mechanisms of adjustment and economic welfare consequences of various ETS regimes that Turkey considers to apply by 2020, i.e. regional ETS and international trading within the EU ETS. We conduct our analysis under the current EU 20–20–20 emission target, 20%, and also under its revised version, 30%. We find that Turkey has economic gains from linking with the EU ETS under the 20% cap, in comparison to the domestic ETSs. Despite the EU's welfare loss under linkage in comparison to the case where Turkey has domestic abatement efforts, it still prefers linking as it increases economic well being compared to the case where Turkey does not abate. Under 30% cutback, Turkey has critical output loss under linkage due to high abatement burden on the EU, while the EU is better off as it passes some of its abatement burden to Turkey. Therefore, emission quotas and their allocation across the ETS and non ETS sectors become highly critical in distributing the overall economic gains from bilateral trading. - Highlights: • We conduct welfare analysis of Turkey's post-Kyoto vision on emission trading. • Welfare impacts of having Turkey in the EU ETS via EU accession are analyzed. • Analysis is done with the current EU target of 20%, and the revised target of 30%. • Welfare impacts of linkage on both regions highly depend on the emission targets. • The EU has welfare gains when Turkey engages in abatement actions

Absolute age determination of quaternary faults

International Nuclear Information System (INIS)

Cheong, Chang Sik; Lee, Seok Hoon; Choi, Man Sik

2000-03-01

To constrain the age of neotectonic fault movement, Rb-Sr, K-Ar, U-series disequilibrium, C-14 and Be-10 methods were applied to the fault gouges, fracture infillings and sediments from the Malbang, Ipsil, Wonwonsa faults faults in the Ulsan fault zone, Yangsan fault in the Yeongdeog area and southeastern coastal area. Rb-Sr and K-Ar data imply that the fault movement of the Ulan fault zone initiated at around 30 Ma and preliminary dating result for the Yang san fault is around 70 Ma in the Yeongdeog area. K-Ar and U-series disequilibrium dating results for fracture infillings in the Ipsil fault are consistent with reported ESR ages. Radiocarbon ages of quaternary sediments from the Jeongjari area are discordant with stratigraphic sequence. Carbon isotope data indicate a difference of sedimentry environment for those samples. Be-10 dating results for the Suryum fault area are consistent with reported OSL results

Absolute age determination of quaternary faults

Energy Technology Data Exchange (ETDEWEB)

Cheong, Chang Sik; Lee, Seok Hoon; Choi, Man Sik [Korea Basic Science Institute, Seoul (Korea, Republic of)] (and others)

2000-03-15

To constrain the age of neotectonic fault movement, Rb-Sr, K-Ar, U-series disequilibrium, C-14 and Be-10 methods were applied to the fault gouges, fracture infillings and sediments from the Malbang, Ipsil, Wonwonsa faults faults in the Ulsan fault zone, Yangsan fault in the Yeongdeog area and southeastern coastal area. Rb-Sr and K-Ar data imply that the fault movement of the Ulan fault zone initiated at around 30 Ma and preliminary dating result for the Yang san fault is around 70 Ma in the Yeongdeog area. K-Ar and U-series disequilibrium dating results for fracture infillings in the Ipsil fault are consistent with reported ESR ages. Radiocarbon ages of quaternary sediments from the Jeongjari area are discordant with stratigraphic sequence. Carbon isotope data indicate a difference of sedimentry environment for those samples. Be-10 dating results for the Suryum fault area are consistent with reported OSL results.

ESR dating of fault rocks

International Nuclear Information System (INIS)

Lee, Hee Kwon

2002-03-01

Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then trow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs grain size shows a plateau for grains below critical size : these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected from the Yangsan fault system. ESR dates from the this fault system range from 870 to 240 ka. Results of this research suggest that long-term cyclic fault activity continued into the pleistocene

ESR dating of fault rocks

Energy Technology Data Exchange (ETDEWEB)

Lee, Hee Kwon [Kangwon National Univ., Chuncheon (Korea, Republic of)

2002-03-15

Past movement on faults can be dated by measurement of the intensity of ESR signals in quartz. These signals are reset by local lattice deformation and local frictional heating on grain contacts at the time of fault movement. The ESR signals then trow back as a result of bombardment by ionizing radiation from surrounding rocks. The age is obtained from the ratio of the equivalent dose, needed to produce the observed signal, to the dose rate. Fine grains are more completely reset during faulting, and a plot of age vs grain size shows a plateau for grains below critical size : these grains are presumed to have been completely zeroed by the last fault activity. We carried out ESR dating of fault rocks collected from the Yangsan fault system. ESR dates from the this fault system range from 870 to 240 ka. Results of this research suggest that long-term cyclic fault activity continued into the pleistocene.

Spatiotemporal patterns of fault slip rates across the Central Sierra Nevada frontal fault zone

Science.gov (United States)

Rood, Dylan H.; Burbank, Douglas W.; Finkel, Robert C.

2011-01-01

Patterns in fault slip rates through time and space are examined across the transition from the Sierra Nevada to the Eastern California Shear Zone-Walker Lane belt. At each of four sites along the eastern Sierra Nevada frontal fault zone between 38 and 39° N latitude, geomorphic markers, such as glacial moraines and outwash terraces, are displaced by a suite of range-front normal faults. Using geomorphic mapping, surveying, and 10Be surface exposure dating, mean fault slip rates are defined, and by utilizing markers of different ages (generally, ~ 20 ka and ~ 150 ka), rates through time and interactions among multiple faults are examined over 10 4-10 5 year timescales. At each site for which data are available for the last ~ 150 ky, mean slip rates across the Sierra Nevada frontal fault zone have probably not varied by more than a factor of two over time spans equal to half of the total time interval (~ 20 ky and ~ 150 ky timescales): 0.3 ± 0.1 mm year - 1 (mode and 95% CI) at both Buckeye Creek in the Bridgeport basin and Sonora Junction; and 0.4 + 0.3/-0.1 mm year - 1 along the West Fork of the Carson River at Woodfords. Data permit rates that are relatively constant over the time scales examined. In contrast, slip rates are highly variable in space over the last ~ 20 ky. Slip rates decrease by a factor of 3-5 northward over a distance of ~ 20 km between the northern Mono Basin (1.3 + 0.6/-0.3 mm year - 1 at Lundy Canyon site) to the Bridgeport Basin (0.3 ± 0.1 mm year - 1 ). The 3-fold decrease in the slip rate on the Sierra Nevada frontal fault zone northward from Mono Basin is indicative of a change in the character of faulting north of the Mina Deflection as extension is transferred eastward onto normal faults between the Sierra Nevada and Walker Lane belt. A compilation of regional deformation rates reveals that the spatial pattern of extension rates changes along strike of the Eastern California Shear Zone-Walker Lane belt. South of the Mina Deflection

Complete nucleotide sequence of the RNA-2 of grapevine deformation and Grapevine Anatolian ringspot viruses.

Science.gov (United States)

Ghanem-Sabanadzovic, Nina Abou; Sabanadzovic, Sead; Digiaro, Michele; Martelli, Giovanni P

2005-05-01

The nucleotide sequence of RNA-2 of Grapevine Anatolian ringspot virus (GARSV) and Grapevine deformation virus (GDefV), two recently described nepoviruses, has been determined. These RNAs are 3753 nt (GDefV) and 4607 nt (GARSV) in size and contain a single open reading frame encoding a polyprotein of 122 kDa (GDefV) and 150 kDa (GARSV). Full-length nucleotide sequence comparison disclosed 71-73% homology between GDefV RNA-2 and that of Grapevine fanleaf virus (GFLV) and Arabis mosaic virus (ArMV), and 62-64% homology between GARSV RNA-2 and that of Grapevine chrome mosaic virus (GCMV) and Tomato black ring virus (TBRV). As previously observed in other nepoviruses, the 5' non-coding regions of both RNAs are capable of forming stem-loop structures. Phylogenetic analysis of the three proteins encoded by RNA-2 (i.e. protein 2A, movement protein and coat protein) confirmed that GDefV and GARSV are distinct viruses which can be assigned as definitive species in subgroup A and subgroup B of the genus Nepovirus, respectively.

Geophysical Imaging of Fault Structures Over the Qadimah Fault, Saudi Arabia

KAUST Repository

AlTawash, Feras

2011-06-01

The purpose of this study is to use geophysical imaging methods to identify the conjectured location of the ‘Qadimah fault’ near the ‘King Abdullah Economic City’, Saudi Arabia. Towards this goal, 2-D resistivity and seismic surveys were conducted at two different locations, site 1 and site 2, along the proposed trace of the ‘Qadimah fault’. Three processing techniques were used to validate the fault (i) 2-D travel time tomography, (ii) resistivity imaging, and (iii) reflection trim stacking. The refraction traveltime tomograms at site 1 and site 2 both show low-velocity zones (LVZ’s) next to the conjectured fault trace. These LVZ’s are interpreted as colluvial wedges that are often observed on the downthrown side of normal faults. The resistivity tomograms are consistent with this interpretation in that there is a significant change in resistivity values along the conjectured fault trace. Processing the reflection data did not clearly reveal the existence of a fault, and is partly due to the sub-optimal design of the reflection experiment. Overall, the results of this study strongly, but not definitively, suggest the existence of the Qadimah fault in the ‘King Abdullah Economic City’ region of Saudi Arabia.

Endangered Lilium Species of Turkey

Directory of Open Access Journals (Sweden)

Sevim Demir

2018-01-01

Full Text Available Turkey, which is among the major gene centers of the world and has a special place in plant genetic diversity. However, many plant genetic resources, including geophytes, are under genetic erosion because of the environmental and other problems and therefore face with the danger of extinction. Lilium ciliatum is endemic to North East Anatolia. IUCN (International Union for the Conservation of Natural Resources Red List Category of this species is Endangered (EN. Lilium ciliatum naturally grown in Zigana pass, Bayburt, Trabzon, Bulancak, Giresun and Gümüşhane is endangered and major threats of L. ciliatum are road construction and human disturbance related to ecotourism and recreation. It was reported that Lilium carniolicum naturally grown in Turkey is endangered although it isn’t in the IUCN Red List. Distribution areas of L. carniolicum are Trabzon, Rize, Artvin and it is also endemic to North East Anatolia. These species have high potential for use as ornamental plants with their colorful big flowers. In addition, the bulbs of these species are also used in the cosmetic industry and medicine. These are the main properties that increase the importance of L. ciliatum and L. carniolicum species. Therefore it is very important to protect the habitats of these species, ensure the continuity of their generations. The disappearance of these endemic species from our country means to disappear from the world. This review has been given in order to give some information about the endangered Lilium species of Turkey and conservation actions on these species in Turkey flora and take attention to the issue.

Turkey's energy efficiency assessment: White Certificates Systems and their applicability in Turkey

International Nuclear Information System (INIS)

Duzgun, B.; Komurgoz, G.

2014-01-01

The last decade has seen an increase in the importance of energy efficiency and the sustainable use of energy resources due to their significant benefits for reducing a country's dependence on foreign energy resources and increasing awareness on environmental problems. Turkey aims to reduce its energy intensity by 20% up to 2023, and in order to accomplish this target, the country plans to use energy more effectively in various industries and develop financial mechanisms for energy efficiency. Although much effort has been made to improve energy efficiency, additional policies such as marked-based incentives are still necessary. This article deals with one of the many market-based energy efficiency policies, called Tradable White Certificates (WhC) or Energy Efficiency Obligations. The current situation of the energy field in Turkey and energy consumption by industries is presented first in this paper, followed by potentials for energy efficiency in each industry and energy efficiency policies. Furthermore, the theory and applicability of a WhC System is introduced and discussed in terms of market conditions, choice of obligated participants and market mechanisms and barriers for the Turkish electricity and natural gas market to benefit from the residential and industrial energy savings potential. - Highlights: • Energy efficiency is the most effective way to reduce foreign energy dependency. • Turkey aims reducing at least 20% of energy intensity in the year 2023. • Energy consumption of industry is 35% of total energy consumption in Turkey. • Marked based policy elements create new opportunities in environmental markets. • WhC System can be implemented in PMUM under the control of regulatory authority

The distribution of deformation in parallel fault-related folds with migrating axial surfaces: comparison between fault-propagation and fault-bend folding

Science.gov (United States)

Salvini, Francesco; Storti, Fabrizio

2001-01-01

In fault-related folds that form by axial surface migration, rocks undergo deformation as they pass through axial surfaces. The distribution and intensity of deformation in these structures has been impacted by the history of axial surface migration. Upon fold initiation, unique dip panels develop, each with a characteristic deformation intensity, depending on their history. During fold growth, rocks that pass through axial surfaces are transported between dip panels and accumulate additional deformation. By tracking the pattern of axial surface migration in model folds, we predict the distribution of relative deformation intensity in simple-step, parallel fault-bend and fault-propagation anticlines. In both cases the deformation is partitioned into unique domains we call deformation panels. For a given rheology of the folded multilayer, deformation intensity will be homogeneously distributed in each deformation panel. Fold limbs are always deformed. The flat crests of fault-propagation anticlines are always undeformed. Two asymmetric deformation panels develop in fault-propagation folds above ramp angles exceeding 29°. For lower ramp angles, an additional, more intensely-deformed panel develops at the transition between the crest and the forelimb. Deformation in the flat crests of fault-bend anticlines occurs when fault displacement exceeds the length of the footwall ramp, but is never found immediately hinterland of the crest to forelimb transition. In environments dominated by brittle deformation, our models may serve as a first-order approximation of the distribution of fractures in fault-related folds.

Fault isolatability conditions for linear systems

DEFF Research Database (Denmark)

Stoustrup, Jakob; Niemann, Henrik

2006-01-01

In this paper, we shall show that an unlimited number of additive single faults can be isolated under mild conditions if a general isolation scheme is applied. Multiple faults are also covered. The approach is algebraic and is based on a set representation of faults, where all faults within a set...... the faults have occurred. The last step is a fault isolation (FI) of the faults occurring in a specific fault set, i.e. equivalent with the standard FI step. A simple example demonstrates how to turn the algebraic necessary and sufficient conditions into explicit algorithms for designing filter banks, which...