WorldWideScience

Sample records for aliphatic copolyester films

  1. Study on biodegradable aromatic/aliphatic copolyesters

    Energy Technology Data Exchange (ETDEWEB)

    Yiwang Chen; Licheng Tan; Lie Chen; Yan, Yang; Xiaofeng Wang [Nanchang University, Nanchang (China). School of Materials Science and Engineering. Inst. of Polymer Materials]. E-mail: ywchen@ncu.edu.cn

    2008-04-15

    Progress on biodegradable aromatic/aliphatic copolyesters based on aliphatic and aromatic diacids, diols and ester monomers was reviewed. The aromatic/aliphatic copolyesters combined excellent mechanical properties with biodegradability. Physical properties and biodegradability of copolyesters varied with chain length of the aliphatic polyester segment and atacticity of copolyesters. The process ability of copolyesters could be improved significantly after incorporating a stiff chain segment through copolymerization of aliphatic polyesters with an aromatic liquid crystal element. The aromatic/aliphatic copolyesters as a new type of biodegradable materials could replace some general plastics in certain applications, namely biomedical and environmental friendly fields. (author)

  2. Effect of electron beam irradiation on the biodegradability of aromatic aliphatic copolyester film and their blend with corn starch

    International Nuclear Information System (INIS)

    Biodegradable and green plastics have been studied in the last years. The aim of this paper is to study the effect of electron beam irradiation on the biodegradability of aromatic aliphatic copolyester film and their blend with corn starch. The samples were irradiated at different doses 10 and 40 kGy in a linear accelerator. The biodegradability of the materials was evaluated by two methods: soil simulated and enzymatic. In the method enzymatic when it was used α-amylase, the irradiated samples presented faster biodegradation than the references non irradiated. The blend of aromatic aliphatic copolyester with corn starch (EcobrasR) irradiated presented a bigger biodegradability than the aromatic aliphatic copolyester (EcoflexR) film in both methods studied. (author)

  3. Study of the electron beam irradiation effect on some properties of aromatic aliphatic copolyester films

    International Nuclear Information System (INIS)

    Biodegradable and green plastics are the new tendency in the world. The effect of the electron beam irradiation in aromatic aliphatic copolyester and the blend with corn starch films (EcoflexR and EcobrasR) were studied by tensile strength at break, elongation at break, Scanning Electronic Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), crosslinking degree and biodegradability. The measurements in both, the machine direction and the transverse direction were made for mechanical tests. It was found that, the electron irradiation caused an increase in the strength at break of the blend with corn starch film, when doses of up to 10 kGy were applied. A significant decrease of the elongation at break of the blend with corn starch was observed at doses of 10 kGy and 40 kGy. It was not found important change in tensile properties for aromatic aliphatic copolyester. Structural changes of the samples (crosslinking or degradation) by SEM were not observed. The FT-IR identified the characteristic peaks of each involved functional group (copolyester and corn starch). However, it was not found bands of oxidation of the samples. In the DSC, changes in the melting temperature of the irradiated EcoflexR and EcobrasR samples, was not identified when compared with the samples of reference. However, it was verified a reduction in the melting enthalpy of the EcobrasR samples after irradiation. The EcobrasR material presented crosslinking, when submitted to doses of 10 kGy and 40 kGy. The EcoflexR material did not present crosslinking when submitted to these doses. The biodegradability of the materials was evaluated by two methods of test: soil simulated and enzymatic. In both methods, the irradiated samples presented faster biodegradation than the references not irradiated. (author)

  4. Study of the electron beam irradiation effect on some properties of aromatic aliphatic copolyester films; Estudo do efeito da radiacao por feixe de eletrons nas propriedades de filmes de copoliester alifatico aromatico

    Energy Technology Data Exchange (ETDEWEB)

    Poveda, Patricia Negrini Siqueira

    2008-07-01

    Biodegradable and green plastics are the new tendency in the world. The effect of the electron beam irradiation in aromatic aliphatic copolyester and the blend with corn starch films (Ecoflex{sup R} and Ecobras{sup R}) were studied by tensile strength at break, elongation at break, Scanning Electronic Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), crosslinking degree and biodegradability. The measurements in both, the machine direction and the transverse direction were made for mechanical tests. It was found that, the electron irradiation caused an increase in the strength at break of the blend with corn starch film, when doses of up to 10 kGy were applied. A significant decrease of the elongation at break of the blend with corn starch was observed at doses of 10 kGy and 40 kGy. It was not found important change in tensile properties for aromatic aliphatic copolyester. Structural changes of the samples (crosslinking or degradation) by SEM were not observed. The FT-IR identified the characteristic peaks of each involved functional group (copolyester and corn starch). However, it was not found bands of oxidation of the samples. In the DSC, changes in the melting temperature of the irradiated Ecoflex{sup R} and Ecobras{sup R} samples, was not identified when compared with the samples of reference. However, it was verified a reduction in the melting enthalpy of the Ecobras{sup R} samples after irradiation. The Ecobras{sup R} material presented crosslinking, when submitted to doses of 10 kGy and 40 kGy. The Ecoflex{sup R} material did not present crosslinking when submitted to these doses. The biodegradability of the materials was evaluated by two methods of test: soil simulated and enzymatic. In both methods, the irradiated samples presented faster biodegradation than the references not irradiated. (author)

  5. Microbial degradation of aliphatic and aliphatic-aromatic co-polyesters.

    Science.gov (United States)

    Shah, Aamer Ali; Kato, Satoshi; Shintani, Noboru; Kamini, Numbi Ramudu; Nakajima-Kambe, Toshiaki

    2014-04-01

    Biodegradable plastics (BPs) have attracted much attention since more than a decade because they can easily be degraded by microorganisms in the environment. The development of aliphatic-aromatic co-polyesters has combined excellent mechanical properties with biodegradability and an ideal replacement for the conventional nondegradable thermoplastics. The microorganisms degrading these polyesters are widely distributed in various environments. Although various aliphatic, aromatic, and aliphatic-aromatic co-polyester-degrading microorganisms and their enzymes have been studied and characterized, there are still many groups of microorganisms and enzymes with varying properties awaiting various applications. In this review, we have reported some new microorganisms and their enzymes which could degrade various aliphatic, aromatic, as well as aliphatic-aromatic co-polyesters like poly(butylene succinate) (PBS), poly(butylene succinate)-co-(butylene adipate) (PBSA), poly(ε-caprolactone) (PCL), poly(ethylene succinate) (PES), poly(L-lactic acid) (PLA), poly(3-hydroxybutyrate) and poly(3-hydoxybutyrate-co-3-hydroxyvalterate) (PHB/PHBV), poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), poly(butylene adipate-co-terephthalate (PBAT), poly(butylene succinate-co-terephthalate) (PBST), and poly(butylene succinate/terephthalate/isophthalate)-co-(lactate) (PBSTIL). The mechanism of degradation of aliphatic as well as aliphatic-aromatic co-polyesters has also been discussed. The degradation ability of microorganisms against various polyesters might be useful for the treatment and recycling of biodegradable wastes or bioremediation of the polyester-contaminated environments. PMID:24522729

  6. Liquid-crystalline aromatic-aliphatic copolyester bioresorbable polymers.

    Science.gov (United States)

    de Oca, Horacio Montes; Wilson, Joanne E; Penrose, Andrew; Langton, David M; Dagger, Anthony C; Anderson, Melissa; Farrar, David F; Lovell, Christopher S; Ries, Michael E; Ward, Ian M; Wilson, Andrew D; Cowling, Stephen J; Saez, Isabel M; Goodby, John W

    2010-10-01

    The synthesis and characterisation of a series of liquid-crystalline aromatic-aliphatic copolyesters are presented. Differential scanning calorimetry showed these polymers have a glass transition temperature in the range 72 degrees C-116 degrees C. Polarised optical microscopy showed each polymer exhibits a nematic mesophase on heating to the molten state at temperatures below 165 degrees C. Melt processing is demonstrated by the production of injection moulded and compression moulded specimens with Young's modulus of 5.7 +/- 0.3 GPa and 2.3 +/- 0.3 GPa, respectively. Wide-angle X-ray scattering data showed molecular orientation is responsible for the increase of mechanical properties along the injection direction. Degradation studies in the temperature range 37 degrees C-80 degrees C are presented for one polymer of this series and a kinetic constant of 0.002 days(-1) is obtained at 37 degrees C assuming a first order reaction. The activation energy (83.4 kJ mol(-1)) is obtained following the Arrhenius analysis of degradation, showing degradation of this material is less temperature sensitive compared with other commercially available biodegradable polyesters. In vitro and in vivo biocompatibility data are presented and it is shown the unique combination of degradative, mechanical and biological properties of these polymers may represent in the future an alternative for medical device manufacturers.

  7. The influence of chemical composition of aliphatic-aromatic copolyesters on their properties

    Energy Technology Data Exchange (ETDEWEB)

    Wojtczak, Malgorzata; Galeski, Andrzej; Piorkowska, Ewa [Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, Sienkiewicza 112, 90-363 Lodz (Poland); Dutkiewicz, Slawomir [Institute of Biopolymers and Chemical Fibres, Marii Sklodowskiej-Curie 19/27, 90-570 Lodz (Poland)

    2014-05-15

    The chain microstructure and properties of a series of aliphatic-aromatic copolyesters in a range of compositions from 10 to 100% of aromatic components were studied by examining melting and crystallization behaviors, dynamic mechanical response, morphology, wide- (WAXS) and small-angle X-ray scattering (SAXS), and tensile deformation. Chain microstructure was analyzed by {sup 1}H NMR. The results indicate that most of copolyesters used in this study have essentially random distribution of comonomers. Copolyesters with more than 30 mol% of aromatic part crystallize with a crystal structure characteristic for homopolymer poly(butylene terephthalate) (PBT). However, some of the reflections from crystal planes are shifted towards lower diffraction angles as compared to butylene terephthalate homoplymer. The phase transition temperatures decrease with increasing aliphatic content. By means of polarized light microscopy (PLM), small-angle light scattering (SALS) and SAXS, crystallization behavior of a selected aliphatic-aromatic copolyester was further explored. Selected copolyester crystallizes in the form of thin fibrous crystals, few nanometers thick, which is the main factor influencing the depression of its melting temperature.

  8. STUDY ON THE PHASE TRANSITION KINETICS OF THERMOTROPIC LIQUID CRYSTALLINE AROMATIC-ALIPHATIC COPOLYESTER

    Institute of Scientific and Technical Information of China (English)

    LI Minhui; WANG Xiaogong; LIU Deshan; ZHOU Qixiang

    1991-01-01

    The phase transition kinetics of thermotropic liquid crystalline aromatic-aliphatic regular copolyester:(X) were studied by DSC. By means of Kissinger's method the kinetic equation and parameters including activation energy, rate order and preexponential factor for phase transition from nematic to isotropic were obtained. The activation energy from crystal to nematic was also presented.

  9. Biodegradable aliphatic-aromatic copolyester/corn starch blend composite reinforced with coffee parchment husk

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Valquiria A.; Teixeira, Jaciele G.; Gomes, Michelle G.; Ortiz, Angel V.; Oliveira, Rene R.; Scapin, Marcos A.; Moura, Esperidiana A.B. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Colombo, Maria A., E-mail: valquiriaalves36@yahoo.com.br [Faculdade de Tecnologia da Zona Leste (FATEC), Sao Paulo, SP (Brazil)

    2013-07-01

    In recent years, studies have shown that the addition of natural fiber or proper filler is an effective strategy for achieving improved properties in biodegradable polymer materials. Moreover, is especially important if such fibers are residues of agro-industrial processes. In this work, a promising technique to develop biodegradable polymer matrix composite based on aliphatic-aromatic copolyester/corn starch blend (Evela®) and coffee parchment husk, which is residue from coffee processing is described. The biodegradable polymeric blend (Evela®) with 5 % (w/w) of ball-milled coffee parchment husk fiber powder, with size ≤250 μm, without any modification was prepared by melt-mixing processing, using a twin screw extruder machine and then pelletized. In a second step, the pelletized Evela®)/coffee parchment (Composite) was then dried at 70 ± 2 deg C for 24 h in a circulating air oven, fed into injection molding machine and test specimens were obtained. The Composite specimen samples were irradiated using an electron beam accelerator, at radiation dose of 20 and 40 kGy, at room temperature in presence of air. The irradiated and non-irradiated samples were characterized by means of scanning electron microscopy (SEM), X-Ray diffraction (XRD), tensile tests and sol-gel analysis and the correlation between their properties was discussed. In addition, coffee parchment husk fiber characterization by SEM, EDS, XRD and WDXRF have also been carried out with a view to evaluate its importance in determining the end-use properties of the composite. (author)

  10. Biodegradable aliphatic-aromatic copolyester/corn starch blend composite reinforced with coffee parchment husk

    International Nuclear Information System (INIS)

    In recent years, studies have shown that the addition of natural fiber or proper filler is an effective strategy for achieving improved properties in biodegradable polymer materials. Moreover, is especially important if such fibers are residues of agro-industrial processes. In this work, a promising technique to develop biodegradable polymer matrix composite based on aliphatic-aromatic copolyester/corn starch blend (Evela®) and coffee parchment husk, which is residue from coffee processing is described. The biodegradable polymeric blend (Evela®) with 5 % (w/w) of ball-milled coffee parchment husk fiber powder, with size ≤250 μm, without any modification was prepared by melt-mixing processing, using a twin screw extruder machine and then pelletized. In a second step, the pelletized Evela®)/coffee parchment (Composite) was then dried at 70 ± 2 deg C for 24 h in a circulating air oven, fed into injection molding machine and test specimens were obtained. The Composite specimen samples were irradiated using an electron beam accelerator, at radiation dose of 20 and 40 kGy, at room temperature in presence of air. The irradiated and non-irradiated samples were characterized by means of scanning electron microscopy (SEM), X-Ray diffraction (XRD), tensile tests and sol-gel analysis and the correlation between their properties was discussed. In addition, coffee parchment husk fiber characterization by SEM, EDS, XRD and WDXRF have also been carried out with a view to evaluate its importance in determining the end-use properties of the composite. (author)

  11. Preparation and characterization of biodegradable aliphatic-aromatic copolyesters/nano-SiO_2 hybrids via in situ melt polycondensation

    Institute of Scientific and Technical Information of China (English)

    Yan Zhang; Bing Tao Wang; Zheng Hong Guo; Jie Chen; Zheng Ping Fang

    2009-01-01

    In situ melt polycondensation was proposed to prepare biodegradable aliphatic-aromatic copolyesters/nano-SiO_2 hybrids based on terephthalic acid (TPA), poly(L-lactic acid) oligomer (OLLA), 1,4-butanediol (BDO) and nano-SiO_2. TEM and FT-IR characterizations confirmed that TPA, OLLA and BDO copolymerized to obtain biodegradable copolyesters, poly(butylene terephthalate-co-lactate) (PBTL), and the abundant hydroxyl groups on the surface of nano-SiO_2 provided potential sites for in situ grafting with the simultaneous resulted PBTL. The nano-SiO_2 particles were chemically wrapped with PBTL to form PBTL/nano-SiO2 hybrids. Due to the good dispersion and interfacial adhesion of nano-SiO_2 particles with the copolyester matrix, the tensile strength and the Young's modulus increased from 5.4 and 5.6 Mpa for neat PBTL to 16 and 390 Mpa for PBTL/nano-SiO_2 hybrids with 5 wt.% nano-SiO_2, respectively. The mechanical properties of PBTL/nano-SiO_2 hybrids were substantially improved.

  12. TRANSESTERIFICATION OF POLY(BISPHENOL A CARBONATE) WITH AROMATIC AND ALIPHATIC SEGMENTS IN BUTYLENE TEREPHTHALATE-CAPROLACTONE COPOLYESTER

    Institute of Scientific and Technical Information of China (English)

    Song Wang; Yi-ping Huang; Xiao-lie Luo; De-zhu Ma

    2004-01-01

    In this article, the transesterification ofpoly(bisphenol A carbonate) (PC) with butylene terephthalate-caprolactone copolyester at a weight ratio 50/50 (BCL(21)) was thoroughly investigated by proton nuclear magnetic resonance spectroscopy (1H-NMR), in conjunction with a model compound. The 1H-NMR results of the annealed blend PC/BCL(21)show that the formation of bisphenol A-terephthalate ester units is the same as in the annealed blend of PC with PBT, and the transesterification actually occurs between PC and butylene terephthalate (BT) segments in BCL(21). By comparison with the model compound bisphenol A dibutyrate, the new signal appearing at δ = 2.56 in the 1H-NMR spectrum confirms the existence of bisphenol A caprolactone ester units resulting from the exchange reaction of PC with caprolactone (CL)segments. 1H-NMR analysis of the transesterification rates reveals that the reaction of PC with aromatic and aliphatic segments in BCL(21) proceeds in a random manner. The miscibility of the blend PC/BCL(21) copolyester is favorable for the transesterification of PC with BT segments and CL segments.

  13. Design, Synthesis and Characterisation of Novel Biodegradable Aliphatic Copolyesters- Poly(ethylene sebacate-co-butylene succinate and Poly(ethylene sebacate-co-butylene adipate

    Directory of Open Access Journals (Sweden)

    L. SOWBAGYALAKSHMI PRABHA

    2012-12-01

    Full Text Available Synthesis of novel aliphatic biodegradable copolyesters namely Poly (ethylene sebacate-co-butylene succinate and Poly (ethylene sebacate-co-butylene adipate were carried out using Poly (butylene Succinate, Poly (Butylene Adipate and Poly (Ethylene Sebacate in presence of Poly Phosphoric acid. Synthesis of Poly (Butylene Succinate, Poly (Butylene Adipate and Poly (Ethylene Sebacate were carried out using respective diols and diacids in presence of titanium tetrabutoxide as catalyst. Newly synthesized copolyesters were characterized by solubility studies, viscosity measurements, thermal analysis, IR Spectroscopy and Nuclear Magnetic Resonance Spectroscopy (1H-NMR and 13C-NMR. The characteristic peaks present in the homopolyesters were recorded in the copolymers as well. DSC analysis of the copolyesters showed multiple melting peaks, while increase of methylene units in the di-acid decreased the Tg.

  14. Novel ether-linkages containing aliphatic copolyesters of poly(butylene 1,4-cyclohexanedicarboxylate) as promising candidates for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Gigli, Matteo [Department of Civil, Chemical, Environmental and Materials Engineering (DICAM), University of Bologna, Via Terracini 28, 40131 Bologna (Italy); Lotti, Nadia, E-mail: nadia.lotti@unibo.it [Department of Civil, Chemical, Environmental and Materials Engineering (DICAM), University of Bologna, Via Terracini 28, 40131 Bologna (Italy); Vercellino, Marco [Department of Molecular Medicine, UdR of INSTM, Viale Taramelli 3/B, University of Pavia, Pavia (Italy); Visai, Livia [Department of Molecular Medicine, UdR of INSTM, Viale Taramelli 3/B, University of Pavia, Pavia (Italy); Department of Occupational Medicine, Ergonomics and Disability, Salvatore Maugeri Foundation, IRCCS, Laboratory of Nanotechnology, Via S. Maugeri 8, 27100 Pavia (Italy); Munari, Andrea [Department of Civil, Chemical, Environmental and Materials Engineering (DICAM), University of Bologna, Via Terracini 28, 40131 Bologna (Italy)

    2014-01-01

    A new class of biodegradable and biocompatible poly(butylene 1,4-cyclohexanedicarboxylate) based random copolymers are proposed for biomedical applications. The introduction of ether–oxygen containing BDG sequences along the PBCE macromolecular chain is expected to remarkably improve chain flexibility and surface hydrophilicity due to the presence of highly electronegative oxygen atoms. P(BCExBDGy) copolymers were synthesized by polycondensation. The homopolymer PBCE and three copolymers, namely (P(BCE70BDG30), P(BCE55BDG45) and P(BCE40BDG60)) were characterized from the molecular, thermal, structural and mechanical point of view. Hydrolytic degradation studies in the presence and absence of hog-pancreas lipase were performed under physiological conditions. To evaluate the diffusion profile of small molecules through the polymer matrix, the release behaviour of fluorescein isothiocyanate (FITC) was investigated. For biocompatibility studies, cell adhesion and proliferation of murine fibroblast (L929) and endocrine pancreatic (INS-1) cells were performed on each polymeric film. Results showed that solid-state properties can be tailored by simply varying copolymers' composition. Crystallinity degree and hydrophobicity significantly decreased with the increase of BDG co-unit mol%. Moreover, mechanical properties and biodegradability of PBCE, both depending on crystallinity degree, were remarkably improved: P(BCE40BDG60) showed an elastomeric behaviour with ε{sub b} over 600% and, as regard to biodegradability, after 98 days it lost over 60% of its initial weight if incubated in the presence of the pancreatic lipase. Lastly, the newly developed biomaterials resulted not cytotoxic with both types of cells and could be properly tailored for biomedical applications varying the content of BDG co-unit mol%. - Highlights: • Ether–oxygen atoms along PBCE chain as winning strategy to improve its properties • Adjustable solid-state properties of copolymers simply

  15. Study on the Synthesis and Biodegradation of Aliphatic Polyester

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An aliphatic polyester, poly(hexalene adipate) (PHA) and an aliphatic copolyester, poly (hexalene adipate succinate) (PHAS) were synthesized by direct condensation of corresponding binary acid and binary alcohol in the presence of a catalyst, p-toluene sulfonic acid. The biodegradation of these polyesters were studied in the laboratory by enzyme attack and outdoor soil burial. The results show that these polyesters have good biodegradability and the copolyester PHAS, even displayed a better biodegradability than the polyester PHA. In the presence of Penicillium chrysogenum the weight loss reached 18.3% for the PHAS (film thickness 1.0 mm)and 9.1% for the PHA (film thickness 1.0 mm) after 28 days. Outdoor soil burial tests indicate that these polyesters also have good biodegradability in natural conditions. The weight loss reached 14.2% for PHAS (film thickness 0.1 mm) and 6.7% for PHA (film thickness 0.1mm) after burying in soil for 36 days.

  16. 芳香/脂肪共聚酯生物材料与大鼠骨髓间充质干细胞的相容性实验%Biocompatibility between aromatic/aliphatic copolyesters and bone marrow mesenchymal stem cells in rats

    Institute of Scientific and Technical Information of China (English)

    谢安; 付建华; 陈义旺; 罗琳; 谈利承; 汪泱

    2009-01-01

    BACKGROUND: Aromatic polyester can not be used alone as degradable material due to its poor biodegradation. In the School of Materials Science and Engineering, Nanchang University, aromatic/aliphatic copolyesters, a new kind of degradable biomaterial is synthesized by melt co-polycondensation and transesterification of terephthalyl chloride, bisphenol A, hexanediol as well as low lacticacid polymer, which has been patented. OBJECTIVE: To study the biocompatibility between aromatic/aliphatic copolyesters and bone marrow mesenchymal stem cells (BM-MSCs) in rats. DESIGN, TIME AND SETTING: An in vitro cellular-materials experiment. The experiment was performed at the Institute of Urology, the First Affiliated Hospital of Nanchang University between April 2006 and April 2007. MATERIALS: Five healthy, adult, male, Sprague Dawley rats were provided by the experimental animal center of Jiangxi University of Traditional Chinese Medicine. The bio-degradable polyester was aromatic/aliphatic copolyesters prepared by our group. METHODS: A new degradable biomaterial poly (4,4'-isopropylidenediphenyl terephthalate)-co-poly(hexylene terephthalate)-co-polylactide (PBHTL) was prepared into biomembrane by casting method. Simultaneously, polyvinyl chloride biomembrane was prepared with the same method. The leaching liquor of biomembrane was collected when the biomembranes were sterilized and immersed in culture medium. The BM-MSCs of rats with the 3~(rd) or 4(th) passage were incubated at the 96-well plates with density of 2×10~7/L and at 24-well plate with 1.3×10~5 per well. The experiment divided into 3 groups. In the negative control group, cells were cultured with DMEM. In the experimental group, 12.5%, 25%, 50%. 100% material leaching liquor were additional added based on DMEM. In the positive group, polyvinyl chloride leaching liquor was added except DMEM. MAIN OUTCOME MEASURES: The cytotoxicity of material was evaluated by neutral red uptake assay, basic fuchsin staining and

  17. Amperometric detection and electrochemical oxidation of aliphatic amines and ammonia on silver-lead oxide thin-film electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Ge, Jisheng

    1996-01-08

    This thesis comprises three parts: Electrocatalysis of anodic oxygen-transfer reactions: aliphatic amines at mixed Ag-Pb oxide thin-film electrodes; oxidation of ammonia at anodized Ag-Pb eutectic alloy electrodes; and temperature effects on oxidation of ethylamine, alanine, and aquated ammonia.

  18. Non-isothermal crystallization kinetics and characterization of biodegradable poly(butylene succinate-co-neopentyl glycol succinate) copolyesters.

    Science.gov (United States)

    Xie, Wen-Jie; Zhou, Xiao-Ming

    2015-01-01

    Both biodegradable aliphatic neat poly(butylene succinate) (PBS) and poly(butylene succinate-co-neopentyl glycol succinate) (P(BS-co-NPGS)) copolyesters with different 1,4-butanediol/neopentyl glycol ratios were synthesized through a two-step process of transesterification and polycondensation using stannous chloride and 4-Methylbenzenesulfonic acid as the co-catalysts. The structure, non-isothermal crystallization behavior, crystalline morphology and crystal structure of neat PBS and P(BS-co-NPGS) copolyesters were characterized by (1)H NMR, differential scanning calorimetry (DSC), polarized optical microscope (POM) and wide angle X-ray diffraction (WAXD), respectively. The Avrami equation modified by Jeziorny and Mo's method was employed to describe the non-isothermal crystallization kinetics of the neat PBS and its copolyesters. The modified Avrami equation could adequately describe the primary stage of non-isothermal crystallization kinetics of the neat PBS and its copolyesters. Mo's method provided a fairly satisfactory description of the non-isothermal crystallization of neat PBS and its copolyesters. Interestingly, the values of 1/t1/2, Zc and F(T) obtained by the modified Avrami equation and Mo's method analysis indicated that the crystallization rate increased first and then decreased with an increase of NPGS content compared that of neat PBS, whereas the crystallization mechanism almost kept unchanged. The results of tensile testing showed that the ductility of PBS was largely improved by incorporating NPGS units. The elongation at break increased remarkably with increasing NPGS content. In particular, the sample with 20% NPGS content showed around 548% elongation at break. PMID:25491999

  19. Influence of Copolyester Composition on Adhesion to Soda-Lime Glass via Molecular Dynamics Simulations.

    Science.gov (United States)

    Hanson, Ben; Hofmann, John; Pasquinelli, Melissa A

    2016-06-01

    Copolyesters are a subset of polymers that have the desirable properties of strength and clarity while retaining chemical resistance, and are thus potential candidates for enhancing the impact resistance of soda-lime glass. Adhesion between the polymer and the glass relates to the impact performance of the system, as well as the longevity of the bond between the polymer and the glass under various conditions. Modifying the types of diols and diacids present in the copolyester provides a method for fine-tuning the physical properties of the polymer. In this study, we used molecular dynamics (MD) simulations to examine the influence of the chemical composition of the polymers on adhesion of polymer film laminates to two soda-lime glass surfaces, one tin-rich and one oxygen-rich. By calculating properties such as adhesion energies and contact angles, these results provide insights into how the polymer-glass interaction is impacted by the polymer composition, temperature, and other factors such as the presence of free volume or pi stacking. These results can be used to optimize the adhesion of copolyester films to glass surfaces. PMID:27206103

  20. PROPERTIES AND MICROSTRUCTURE OF AROMATIC LIQUID CRYSTALLINE COPOLYESTERS

    Institute of Scientific and Technical Information of China (English)

    WANG Yong; WU Dacheng; LI Ruixia

    1997-01-01

    The properties and structures of thermotropical liquid crystalline copolyesters based on p-hydroxybenzoic acid (PHBA), terephthalic acid (TPA) and biaphenol A (BPA) were studied by DSC, WAXD, hot stage polarized microscopy and NMR. It was found that most of the copolyesters were soluble in many common organic solvents. The copolyesters had low Tm/Tf values and a broad range of liquid crystal phase, making the polymers readily melt-processable. The effects of annealing at different temperatures on the copolyester containing 33% PHBA were also discussed. It was noted that annealing at ca. 200℃ (below Tc - n) could lead to the increasing of the crystallinity of the copolyester while the microstructure and sequence structure had not changed. Annealing at ca. 280℃ (near Tc - n) could bring a change of crystal and sequence structure and simultaneously made the microdomains be ordered more perfectly.

  1. Microstructuring of triazene containing copolyester films

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, C.; Kunz, T.; Wokaun, A. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-06-01

    The growing field of microtechnology has an increasing demand for affordable functional materials. Several strategies exist for improving the ablation behaviour of standard polymers. One is the copolymerization of a standard commercial polymer with a specialty polymer, in our case of a polyester and triazene group containing polyester. For comparison of the copolymers with different fractions of triazene groups we have determined the threshold fluences and the effective absorption coefficients. With respect to these ablation parameters, only small differences were found within the set of copolymers investigated. Only with AFM and SEM it was possible to detect that a minimum content of triazene groups is necessary for defined microstructure with sharp edges, whereby a resolution in the sub {mu}m scale has been achieved. (author) 4 figs., 1 tab., 5 refs.

  2. Non-isothermal crystallization kinetics and characterization of biodegradable poly(butylene succinate-co-neopentyl glycol succinate) copolyesters

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Wen-Jie; Zhou, Xiao-Ming, E-mail: xiaomingzhou@tust.edu.cn

    2015-01-01

    Both biodegradable aliphatic neat poly(butylene succinate) (PBS) and poly(butylene succinate-co-neopentyl glycol succinate) (P(BS-co-NPGS)) copolyesters with different 1,4-butanediol/neopentyl glycol ratios were synthesized through a two-step process of transesterification and polycondensation using stannous chloride and 4-Methylbenzenesulfonic acid as the co-catalysts. The structure, non-isothermal crystallization behavior, crystalline morphology and crystal structure of neat PBS and P(BS-co-NPGS) copolyesters were characterized by {sup 1}H NMR, differential scanning calorimetry (DSC), polarized optical microscope (POM) and wide angle X-ray diffraction (WAXD), respectively. The Avrami equation modified by Jeziorny and Mo's method was employed to describe the non-isothermal crystallization kinetics of the neat PBS and its copolyesters. The modified Avrami equation could adequately describe the primary stage of non-isothermal crystallization kinetics of the neat PBS and its copolyesters. Mo's method provided a fairly satisfactory description of the non-isothermal crystallization of neat PBS and its copolyesters. Interestingly, the values of 1/t{sub 1/2}, Z{sub c} and F(T) obtained by the modified Avrami equation and Mo's method analysis indicated that the crystallization rate increased first and then decreased with an increase of NPGS content compared that of neat PBS, whereas the crystallization mechanism almost kept unchanged. The results of tensile testing showed that the ductility of PBS was largely improved by incorporating NPGS units. The elongation at break increased remarkably with increasing NPGS content. In particular, the sample with 20% NPGS content showed around 548% elongation at break. - Highlights: • The incorporation of NPGS units reduced the spherulite size of BS unit. • The existence of NPGS units did not change the crystal structure of BS unit. • The NPGS units incorporated in PBS could significantly improve the ductility of

  3. STUDIES ON MISCIBILITY AND MORPHOLOGICAL FEATURES OF BLENDS OF LC COPOLYESTER AND PET

    Institute of Scientific and Technical Information of China (English)

    XIE Ping; CHEN Shouxi; SHEN Deyan; YING Xinfang; JIN Yongze; LU Daohui

    1988-01-01

    The morphology of a special blend system composed of liquid crystalline aromatic random copolyester (LCP) and semiflexible polyester PET over the whole composition range has been studied by means of polarized microscope, density measurement, DSC, FTIR and SEM. Based on the microscopic observation, it is found that under suitable mechanical mixing condition, LCP may be rather homogeneously dispersed in the PET matrix, with the middle composition range of the contents of LCP at 30-70 wt % the anisotropic and isotropic phase segregation appears. while with LCP contents over 80 wt% the blends exhibit wholly anisotropic. The DSC thermographs of the melt-pressed and quenched films show single Tg, Tcc and Tm. Tg increases with increasing content of LCP and ap. proaches to the Tg of pure LCP. The experimental results indicate that the two components of this blend system are miscible, there exist some specific interactions between them.

  4. Synthesis and characterization of biodegradable aliphatic copolyesters with hydrophilic soft segments

    Directory of Open Access Journals (Sweden)

    JASNA DJONLAGIC

    2004-12-01

    Full Text Available In this study, the synthesis, structure and physical properties of two series of segmented poly(ester-ethers based on poly(butylene succinate and two different types of polyethers were investigated. The poly(ester-ethers were synthesized by transesterification reaction of dimethyl succinate, 1,4-butanediol and poly(ethylene oxide (PEO, Mn = 1000 g/mol in the first series, and poly(tetramethylene oxide (PTMO, Mn = 1000 g/mol in the second. The mass fraction of soft segments was varied between 10 and 50 mass. %. The effect of the introduction of two different polyether soft segments on the structure, thermal and rheological properties were investigated. The composition of the poly(ester-ethers, determined from their 1H-NMR spectra, showed that incorporation of soft polyether segments was successfully performed by the transesterification reaction in bulk. The molecular weight was estimated from solution viscosity measurements and complex dynamic viscosities. The thermal properties investigated by DSC indicated that the presence of soft segments lowers the melting and crystallization temperature of the hard phase, as well as the degree of crystallinity. Dynamical mechanical analysis was used to investigate the influence of composition on the rheological behavior of the segmented poly(ester-ethers. The results obtained from an enzymatic degradation test performed on some of the synthesized polymers showed that the biodegradability is enhanced with increasing hydrophilicity.

  5. THERMOTROPIC LIQUID CRYSTALLINE COPOLYESTERS-SOLID STATE POLYMORPHISM

    Institute of Scientific and Technical Information of China (English)

    XIE ping; LU Daohui; BAO Jingsheng

    1988-01-01

    This paper offers some new evidence on the polymorphism of solid state of liquid crystalline aromatic copolyesters which were prepared in our laboratory. The effects of different treatment conditions(quenching and annealing) on solid structure have been examined mainly by DSC and X-ray diffraction. The discussion focuses on the supercooled mesophase and low temperature solid-solid transition, the shifting of double melting peaks of annealed samples and the changing of their △H data depending on the treatment temperature, time and thermal scanning rate.

  6. PREPARATION AND PROPERTIES OF POLY (LACTIC ACID-CO-GLYCOL TEREPHTHALIC ACID) COPOLYESTER

    Institute of Scientific and Technical Information of China (English)

    GAO Cuili; JI Quan; KONG Qingshan; XIA Yanzhi

    2006-01-01

    To obtain a kind of biodegradable polymer material with satisfactory properties, a new biodegradable copolyester poly(lactic acid-co-glycol terephthalate) (PETA), was synthesized from three monomers of lactic acid, glycol and terephthalic acid. The resulting copolyesters, PETA, were characterized by FT-IR, 1H-NMR, DSC, TGA and by the ways of weight loss rate to characterize their biodegradability. The findings in this work indicated that, the TmS and TdS of copolyesters PETA increased with increasing contents of the terephthalic acid units. From the biodegradation tests in natural soil, boiling water, acid buffer solution and alkali buffer solution, it was shown that the biodegradability of copolyesters PETA decreased with increasing contents of the terephthalic acid units.

  7. Effects of synthesis conditions on chemical structures and physical properties of copolyesters from lactic acid, ethylene glycol and dimethyl terephthalate

    Directory of Open Access Journals (Sweden)

    2009-07-01

    Full Text Available Lactic acid/ethylene terephthalate copolyesters were synthesized by the standard melt polycondensation of lactic acid (L, ethylene glycol (EG and dimethyl-terephthalate (DMT. Effects of reaction temperatures and types of catalysts on the structures and properties of the copolymers were examined. In addition, feasibility of promoting the copolymerization process by a novel synthesis step of using thermo-stabilizers was investigated. The results show that a reaction temperature of higher than 180°C is necessary to produce copolymers with appreciable molecular weight. However, degradation was observed when the reaction temperature is higher than 220°C. Triphenyl phosphate (TPP shows promising results as a potential thermo-stabilizer to minimize this problem. It was found that Sb2O3 and Tin(II octoate are most effective among 4 types of catalysts employed in this study. 1H-NMR results indicate that copolymers have a random microstructure composed mainly of single L units alternately linked with ET blocks at various sequential lengths. The longer ET sequence in the chain structure leads to the increase in melting temperature of the copolymer. TGA results show that the resulting copolymers possessed greater thermal stability than commercially-available aliphatic PLA, as a result of the inclusion of T (terephthalate units in the chain structure.

  8. THE SPHERULITE-LIKE STRUCTURE OF MAIN CHAIN THERMOTROPIC AROMATIC COPOLYESTERS

    Institute of Scientific and Technical Information of China (English)

    Shou-xi Chen; Hua-chun Zhai; Yong-ze Jin

    1999-01-01

    A new spherulite-like structure of main chain thermotropic aromatic copolyesters formed in solution cast specimens was observed and was studied by means of polarizing microscopy, X-ray diffraction,SEM and IR spectrometry. Results indicate that the spherulite-like structure of main chain thermotropic aromatic copolyesters formed from the casting solution (phenol/Cl2CH2CH2Cl2) is not a real crystal but only a high oriented arrangement of the macromolecular chains as a spherulite. This resulted from the interaction between the needle-like crystal of phenol and the rigid mesomorphic groups of molecular chain. The parallel packing of extended copolyester molecules along the needle-like crystal of phenol leads to the formation of the spherulite-like structure.

  9. Tearing resistance of some co-polyester sheets

    International Nuclear Information System (INIS)

    A three-zone model consisting of initial, evolutionary and stabilised plastic zones for tearing resistance was proposed for polymer sheets. An analysis with the model, based on the essential work of fracture (EWF) approach, was demonstrated to be capable for predicting specific total work of fracture along the tear path across all the plastic zones although accuracy of specific essential work of fracture is subject to improvement. Photo-elastic images were used for identification of plastic deformation sizes and profiles. Fracture mode change during loading was described in relation with the three zones. Tearing fracture behaviour of extruded mono- and bi-layer sheets of different types of amorphous co-polyesters and different thicknesses was investigated. Thick material exhibited higher specific total work of tear fracture than thin mono-layer sheet in the case of amorphous polyethylene terephthalate (PET). This finding was explained in terms of plastic zone size formed along the tear path, i.e., thick material underwent larger plastic deformation than thin material. When PET and polyethylene terephthalate glycol (PETG) were laminated with each other, specific total work of fracture of the bi-layer sheets was not noticeably improved over that of the constituent materials

  10. SYNTHESIS OF LIQUID CRYSTALLINE COPOLYESTERS WITH T-SHAPED TWO-DIMENSIONAL MESOGENIC UNIT AND CROWN ETHER CYCLE

    Institute of Scientific and Technical Information of China (English)

    Shu-yuan Zhang; Xiao-jing Zhang; Gao-ming Mo; Zi-fa Li

    2008-01-01

    A novel series of liquid crystalline copolyesters with T-shaped two-dimensional mesogenic unit and crownether cycle of cis-4,4'-bis(4-hydroxyphenylazo)dibenzo-18-crown-6 was prepared via solution condensation polymerizationfrom 4,4'-(α,ω-hexanedioyloxy)dibenzoyl dichloride (M1), 2-(4'-ethoxyphenyl)hydroquinone (M2) and cis-4,4'-his(4-hydroxyphenylazo)dibenzo-18-crown-6 (M3). The molecular weights of copolyesters are not high, and the intrinsic viscosity[η] of copolyesters ranges from 0.29-0.43. The monomers' structures were identified by elemental analysis, IR, UV,1H-NMR, MS, etc. All the copolyesters are yellowish powders and insoluble in THF and CHCl3 at room temperature exceptCP-9. The properties of copolyesters were investigated by using GPC, [η], DSC, TG.WAXD and POM. It was found that allthe copolyesters entered into liquid crystalline phase when they were heated to above their melting temperature (Tm). Thethreaded texture and schlieren texture of nematic phase can be observed on POM. Their Tm and isotropic temperature (Ti)decrease gradually, while thermal stability increase with varying the content of T-shaped two-dimensional mesogenic unit inthe copolyesters.

  11. Elastic Compositions Based on Polyurethane/ Aliphatic Polyesters

    International Nuclear Information System (INIS)

    Aliphatic polyesters were prepared by melt condensation reaction of a dicarboxylic acid such as adipic and sebacic with different types of diol compounds in 1: 1.1 molar ratio. Ethylene glycol, di-, trio, tetra ethylene glycol and poly( ethylene glycol) with different molecular weights 1000, 4000, 6000 as well as the prepared hydroxy natural rubber were used as diol compounds. Polyurethane, with NCO/OH ratio equal 4, was synthesized from the reaction of toluene diisocyanate with poly(ethylene glycol) 1 000. The prepared polyurethane was mixed with different weight percentages of the prepared aliphatic polyesters. The film samples were tested mechanically, electrically and chemically. The results show that the weight percentage 10% of the added polyadipate or poly sebacate glycols improves flexibility, electrical volume resistivity, dielectric constant and dielectric loss of unmodified rigid polyurethane film sample as well as reduces its swelling by aromatic solvents. All the above mentioned properties improve by increasing the hydrocarbon chain length of the glycol portion in the glycol used and the number of methylene in the aliphatic dicarboxylic acid. Compositions based on hydroxy natural rubber impart better properties than those based on ethylene glycols

  12. Controlled-release fertilizer prepared using a biodegradable aliphatic copolyester of poly(butylene succinate) and dimerized fatty acid.

    Science.gov (United States)

    Lubkowski, Krzysztof; Smorowska, Aleksandra; Grzmil, Barbara; Kozłowska, Agnieszka

    2015-03-18

    The preparation and characterization of a controlled-release multicomponent (NPK) fertilizer with the coating layer consisting of a biodegradable copolymer of poly(butylene succinate) and a butylene ester of dilinoleic acid (PBS/DLA) is reported. The morphology and structure of the resulting polymer-coated materials and the thickness of the covering layers were examined using X-ray diffraction and scanning electron microscopy coupled with energy dispersive X-ray analysis. The mechanical properties of these materials were determined with a strength-testing machine. Nutrient release was measured in water using spectrophotometry, potentiometry, and conductivity methods. The results of the nutrient release experiments from these polymer-coated materials were compared with the requirements for controlled-release fertilizers. A conceptual model is presented describing the mechanism of nutrient release from the materials prepared in this study. This model is based on the concentrations of mineral components inside the water-penetrated fertilizer granules, the diffusion properties of the nutrients in water, and a diffusion coefficient through the polymer layer. The experimental kinetic data on nutrient release were interpreted using the sigmoidal model equation developed in this study. PMID:25715823

  13. Biodegradation of Aliphatic-aromatic Coplyester under Thermophilic Conditions

    Directory of Open Access Journals (Sweden)

    Elsayed B. Belal

    2013-11-01

    Full Text Available The biodegradation of poly (tetramethylene adipate-co-tetramethylene terephthalate (BTA-copolyester as synthetic polyester was investigated under thermophilic conditions. Two efficient BTA degrading actinomycetes were isolated from compost at thermophilic phase. These strains were identified as Thermobifida fusca and Thermobispora bispora. The degradation rate for BTA films within 7 days was 17.12 and 16.96 mg/week.cm2 by T. fusca and T. bispora, respectively. The optimum BTA40:60 degradation conditions are obtained as pH7 and 55°C. The both strains exhibited a wider substrate spectrum as they are able to degrade synthetic polyesters (BTA40:60, PCL-S MaterBi ZF03U/A and natural polymers (poly-&beta-hydroxybutyric acid (PHB and carboxymethyl cellulose. It was shown that the extracellular hydrolyases activity from the both strains was induced in the presence of BTA-copolyester, while the presence of additional carbon sources such as glucose or a complex medium suppressed enzyme formation. Tributyrin as triglycerides was degraded by the both crude concentrated BTA-hydrolases. In contrast the enzyme was not capable to depolymerize the natural polymers PHB and carboxymethyl cellulose, although the organism itself degraded both types of polymers. The obtained results showed that the degradation rate with T. fusca BTA40:60-hydrolase was 3.67 mg/day.cm2 and was 3.5 mg/day.cm2 with T. bispora BTA40:60-hydrolase. The pH optimum for BTA-hydrolases was 7 with 20 and 100 mM phosphate buffer and it was 6 with 150 mM citrate buffer. Finally, it could be concluded that actinomycetes and their hydrolases play an outstanding role in recycling of biodegradable plastics under thermophilic phase during composting process.

  14. Anaerobic digestion of aliphatic polyesters.

    Science.gov (United States)

    Šmejkalová, Pavla; Kužníková, Veronika; Merna, Jan; Hermanová, Soňa

    2016-01-01

    Anaerobic processes for the treatment of plastic materials waste represent versatile and effective approach in environmental protection and solid waste management. In this work, anaerobic biodegradability of model aliphatic polyesters, poly(L-lactic acid) (PLA), and poly(ɛ-caprolactone) (PCL), in the form of powder and melt-pressed films with varying molar mass, was studied. Biogas production was explored in batch laboratory trials at 55 ± 1°C under a nitrogen atmosphere. The inoculum used was thermophilic digested sludge (total solids concentration of 2.9%) from operating digesters at the Central Waste Water Treatment Plant in Prague, Czech Republic. Methanogenic biodegradation of PCLs typically yielded from 54 to 60% of the theoretical biogas yield. The biodegradability of PLAs achieved from 56 to 84% of the theoretical value. High biogas yield (up to 677 mL/g TS) with high methane content (more than 60%), comparable with conventionally processed materials, confirmed the potential of polyester samples for anaerobic treatment in the case of their exploitation in agriculture or as a packaging material in the food industry. PMID:27191559

  15. Role of nitrogen in the formation of HC-N films by CH(4)/N(2) barrier discharge plasma: aliphatic tendency.

    Science.gov (United States)

    Majumdar, Abhijit; Das, Gobind; Basvani, Kaleswara Rao; Heinicke, Joachim; Hippler, Rainer

    2009-12-01

    We have studied the influence of nitrogen on the chemical properties of the hydrogenated carbon nitride (a-CN(x):H) film deposited by CH(4)/N(2) dielectric barrier discharge (DBD) plasma. X-ray photoelectron spectroscopy (XPS) indicates that carbon and nitrogen form an unpolarized covalent bond in these C-N(x) materials, and the observed chemical shift in the C 1s and N 1s binding energy is explained with respect to N 1s incorporation. Furthermore, the average nitrogen content (N/C approximately 0.76) in the films was systematically varied by changing the nitrogen partial pressure (CH(4)/N(2) approximately from 5:1 to 1:7) which is well supported by the elemental analysis. Fourier transform infrared (FTIR) absorption spectra exhibit significant changes in different C-N, C identical withN, and NH/OH molecular bands at higher nitrogen concentration in the film. The isonitrile and nitrile groups (-NC and -CN) are increased with the increase of deposition time. In addition, the elemental analysis, proton NMR, and thermolysis mass spectrum show that the composition of the film with the ratio CH(4)/N(2) approximately 1:1 is C, 67.68; H, 9.88; N, 16.53 (in wt %) and that the film is composed of polymers, probably containing linear chains which are cleaved off on heating in vacuum. PMID:19894689

  16. Effect of Hydroxyapatite Nanoparticles on the Degradability of Random Poly(butylene terephthalate-co-aliphatic dicarboxylates Having a High Content of Terephthalic Units

    Directory of Open Access Journals (Sweden)

    Nina Heidarzadeh

    2016-07-01

    Full Text Available Copolyesters derived from 1,4-butanediol and constituted also of aliphatic and aromatic dicarboxylate units in a molar ratio of 3:7 were synthesized by a two-step polycondensation procedure. Succinic, adipic, and sebacic acids were specifically selected as the aliphatic component whereas terephthalic acid was chosen as the aromatic moiety. The second synthesis step was a thermal transesterification between the corresponding homopolymers, always attaining a random distribution as verified by NMR spectroscopy. Hybrid polymer composites containing 2.5 wt % of hydroxyapatite (HAp were also prepared by in situ polymerization. Hydroxyl groups on the nanoparticle surface allowed the grafting of polymer chains in such a way that composites were mostly insoluble in the typical solvents of the parent copolyesters. HAp had some influence on crystallization from the melt, thermal stability, and mechanical properties. HAp also improved the biocompatibility of samples due to the presence of Ca2+ cations and the damping effect of phosphate groups. Interestingly, HAp resulted in a significant increase in the hydrophilicity of samples, which considerably affected both enzymatic and hydrolytic degradability. Slight differences were also found in the function of the dicarboxylic component, as the lowest degradation rates was found for the sample constituted of the most hydrophobic sebacic acid units.

  17. Chemical recycling of poly(ethylene terephthalate. Application to the synthesis of multiblock copolyesters

    Directory of Open Access Journals (Sweden)

    F. Malek

    2014-08-01

    Full Text Available The chemical recycling of the poly(ethylene terephthalate, (PET, has been successfully carried out by glycolysis in the presence of bis (2-hydroxyethyl terephthalate (BHET resulting in the formation of hydroxytelechelic oligomers. These oligomers were then treated with carboxytelechelic poly(ε-caprolactone oligomers of Mn = 2300 and Mn = 730 g•mol–1 molecular weight, in the absence or presence of the titanium tetrabutyloxide (Ti(OBu4 as a catalyst to get multiblock copolyesters. The chemical structure of the synthesized copolyesters was investigated by size exclusion chromatography (SEC and proton Nuclear Magnetic Resonance (1H NMR spectroscopy. Moreover the differential scanning calorimetry (DSC was used to explore their thermal properties. The ester-ester interchange reaction was observed between the two oligopolyesters, was studied and discussed in detail.

  18. Synthesis and characterization of hydrolytically degradable copolyester biomaterials based on glycolic acid, sebacic acid and ethylene glycol.

    Science.gov (United States)

    Simitzis, J; Soulis, S; Triantou, D; Zoumpoulakis, L; Zotali, P

    2011-12-01

    Copolyesters of glycolic acid (G) combined with sebacic acid (S) and ethylene glycol were synthesized in different molar ratios (G: 0-100% and S: 100-0%) and their hydrolytic degradation was studied and correlated with their structures. Based on the FTIR spectra of the homopolyesters and copolyesters and the normalized peak intensity of the I(2918), I(2848) and I(1087) for the corresponding wavenumbers, it is concluded that the I(2918) and the I(2848) are in accordance with the mean number degree of polymerization of ethylene sebacate units and the I(1087) is in accordance with the mean number degree of polymerization of glycolate units. Based on the XRD diffractograms, poly(ethylene sebacate) and poly(glycolic acid) belong to the monoclinic and the orthorhombic crystal system, respectively and both have higher crystallinity than the copolyesters. The experimental data of the hydrolytic degradation were fitted with exponential rise to maximum type functions using two-parameter model and four-parameter model. Three regions can been distinguished for the hydrolytic degradation by decreasing the molar feed ratio of sebacic acid, which are correlated with the changes of crystallinity. Two copolyesters are proposed: first the copolyester with high amount of glycolate units (S10G90) having higher hydrolytic degradation than G100 and second the copolyester with equal amount of glycolate and ethylene sebacate units (S50G50), having lower hydrolytic degradation than G100. These hydrolytically degradable copolyesters are soluble in common organic solvents, opposite to poly(glycolic acid) and could have perspectives for biomedical applications.

  19. SYNTHESIS AND CHARACTERIZATION OF THERMOTROPIC COPOLYESTERS AND COPOLY (ESTER-AMIDE)S CONTAINING OXYETHYLENE-ETHER AS THE SPACER

    Institute of Scientific and Technical Information of China (English)

    WANG Shanger; MO Zhishen; ZHANG Hongfang; FENG Zhiliu

    1995-01-01

    Flexible oxyethylene-ether was introduced into the aromatic copolyesters and copoly (ester-amide)s to reduce the melting point of resulting polymers. The melting point was greatly reduced to 200℃ or even lower in some cases, and the molecular weight was satisfactorily high as reflected by inherent viscosity. The polymers exhibited high thermal stability and good mechanical properties as determined by TGA and mechanical tests. The copolyester showed better crystallinity and liquid crystallinity than corresponding copoly(ester-amide)s with similar monomer composition as reflected by POM observation and WAXD study. The melting points for both copolyesters and copoly (ester-amide)s showed great dependence on the pacetoxybenzoic acid (PAB) content in monomer composition and reached the lowest value when PAB was 29 mol%.

  20. SYNTHESIS AND CHARACTERIZATION OF MAIN CHAIN AROMATIC LIQUID CRYSTAL COPOLYESTERS WITH X-SHAPED AND ROD-SHAPED MESOGENIC UNITS

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    A series of main chain liquid crystal aromatic copolyesters with X-shaped and rod-shaped mesogenic units were synthesized via solution condensation polymerizations of 4, 4'-(α,ω-octanedioyloxy)-dibenzoyl dichlorides with 2,5-bis(p-octanoxy benzoyloxy)-hydroquinone and diphenol. All of the copolyesters showed thermotropic liquid crystalline behaviors through observations using DSC, polarized microscopy and X-ray diffraction. The melting point (Tm) and the isotropization temperature (Ti) change regularly with varying the content of diphenol unit in the copolymers.

  1. Multi-drug delivery of tuberculosis drugs by π-back bonded gold nanoparticles with multiblock copolyesters

    Science.gov (United States)

    Gajendiran, Mani; Balashanmugam, Pannerselvam; Kalaichelvan, P. T.; Balasubramanian, Sengottuvelan

    2016-06-01

    The effect of π-back-bonding between AuNPs and the carbonyl group of multiblock copolyester on tuberculosis multi-drug delivery has been investigated. The carbonyl group of copolyester has vacant p orbitals and these vacant orbitals accept electron clouds from the filled d orbitals of Au0 to form π-back-bonding, which enhances the electron density for the carbonyl oxygen. This high electron density results in the strong binding of drug molecules with multiblock copolyesters and hence sustained drug release is achieved for a longer duration when compared to polymer systems without AuNPs. A new series of tartarate-linked poly(lactic-co-glycolic acid) (PLGA)—polyethylene glycol (PEG)-based multiblock copolymers has been synthesized using a solvent-free melt reaction. The biocompatibility of multiblock copolyesters and AuNP nanoconjugates was investigated with an in vitro cytotoxicity study on the Vero cell line. Three major tuberculosis drugs, namely, rifampicin-, isoniazid- and pyrazinamide-loaded AuNP multiblock copolymer NPs were prepared by probe sonication followed by the self-assembly method. An in vitro drug release experiment was carried out and the amount of the three drugs released at various time intervals was determined simultaneously by the HPLC technique. The nanoconjugates exhibit 33%-40% RIF, 71%-95% INH, 77%-99% PYZ loading efficiencies, while the polymer NPs exhibit relatively lesser values. The nanoconjugates show sustained drug release for up to 264 h.

  2. Polyethylene Maleate Copolyesters as Coating Materials for Piezoelectric Quartz Crystal-based Chemical Sensors

    Directory of Open Access Journals (Sweden)

    D. C. Gupta

    2005-10-01

    Full Text Available Polyethylene maleate (PEM was synthesised by direct polycondensation of maleic anhydride and ethylene glycol in toluene under reflux usingp-toluene sulphonic acid as a catalyst. Structure of PEM was further modified by varying nature of diols and acid components, chain length of glycols, incorporation of aromatic and fluorine groups in the chain. Formation of PEM was monitored by gas chromatography. The parameters like degree of polymerisation, number average molecular weight (Mn, and weight average molecular weight (Mw were calculated from the extent of reaction and stoichiometric ratio of the reactants. The number average molecular weight was also determined using Knauer vapour pressure osmometer. Cohesive energy, volume, and solubility parameters of PEM-based copolyesters were calculated by group contribution method. These PEM-based copolyesters’ have been evaluated as sorbent-coating materials for the detection of organ0 phosphorus(OPcompo using dimethylmethylphosphonate (DMMP as model compound and piezoelectric crystal detector. PEMbisphenol A is found to be the most sensitive and potential coating material for the detection of OP compounds using piezoelectric crystal detector. Potential PEM-based copolyesters have been characterised by viscosity, infrared spectroscopy, NMR spectroscopy, Mn and thermal stability.

  3. Guided desaturation of unactivated aliphatics

    Science.gov (United States)

    Voica, Ana-Florina; Mendoza, Abraham; Gutekunst, Will R.; Fraga, Jorge Otero; Baran, Phil S.

    2012-08-01

    The excision of hydrogen from an aliphatic carbon chain to produce an isolated olefin (desaturation) without overoxidation is one of the most impressive and powerful biosynthetic transformations for which there are no simple and mild laboratory substitutes. The versatility of olefins and the range of reactions they undergo are unsurpassed in functional group space. Thus, the conversion of a relatively inert aliphatic system into its unsaturated counterpart could open new possibilities in retrosynthesis. In this article, the invention of a directing group to achieve such a transformation under mild, operationally simple, metal-free conditions is outlined. This ‘portable desaturase’ (TzoCl) is a bench-stable, commercial entity (Aldrich, catalogue number L510092) that is facile to install on alcohol and amine functionalities to ultimately effect remote desaturation, while leaving behind a synthetically useful tosyl group.

  4. Aliphatic hydrocarbons of the fungi.

    Science.gov (United States)

    Weete, J. D.

    1972-01-01

    Review of studies of aliphatic hydrocarbons which have been recently detected in the spores of phytopathogenic fungi, and are found to be structurally very similar to the alkanes of higher plants. It appears that the hydrocarbon components of the few mycelial and yeast forms reported resemble the distribution found in bacteria. The occurence and distribution of these compounds in the fungi is discussed. Suggested functional roles of fungal spore alkanes are presented.

  5. Combinatorics of aliphatic amino acids.

    Science.gov (United States)

    Grützmann, Konrad; Böcker, Sebastian; Schuster, Stefan

    2011-01-01

    This study combines biology and mathematics, showing that a relatively simple question from molecular biology can lead to complicated mathematics. The question is how to calculate the number of theoretically possible aliphatic amino acids as a function of the number of carbon atoms in the side chain. The presented calculation is based on earlier results from theoretical chemistry concerning alkyl compounds. Mathematical properties of this number series are highlighted. We discuss which of the theoretically possible structures really occur in living organisms, such as leucine and isoleucine with a chain length of four. This is done both for a strict definition of aliphatic amino acids only involving carbon and hydrogen atoms in their side chain and for a less strict definition allowing sulphur, nitrogen and oxygen atoms. While the main focus is on proteinogenic amino acids, we also give several examples of non-proteinogenic aliphatic amino acids, playing a role, for instance, in signalling. The results are in agreement with a general phenomenon found in biology: Usually, only a small number of molecules are chosen as building blocks to assemble an inconceivable number of different macromolecules as proteins. Thus, natural biological complexity arises from the multifarious combination of building blocks.

  6. Development of aliphatic biodegradable photoluminescent polymers

    Science.gov (United States)

    Yang, Jian; Zhang, Yi; Gautam, Santosh; Liu, Li; Dey, Jagannath; Chen, Wei; Mason, Ralph P.; Serrano, Carlos A.; Schug, Kevin A.; Tang, Liping

    2009-01-01

    None of the current biodegradable polymers can function as both implant materials and fluorescent imaging probes. The objective of this study was to develop aliphatic biodegradable photoluminescent polymers (BPLPs) and their associated cross-linked variants (CBPLPs) for biomedical applications. BPLPs are degradable oligomers synthesized from biocompatible monomers including citric acid, aliphatic diols, and various amino acids via a convenient and cost-effective polycondensation reaction. BPLPs can be further cross-linked into elastomeric cross-linked polymers, CBPLPs. We have shown representatively that BPLP-cysteine (BPLP-Cys) and BPLP-serine (BPLP-Ser) offer advantages over the traditional fluorescent organic dyes and quantum dots because of their preliminarily demonstrated cytocompatibility in vitro, minimal chronic inflammatory responses in vivo, controlled degradability and high quantum yields (up to 62.33%), tunable fluorescence emission (up to 725 nm), and photostability. The tensile strength of CBPLP-Cys film ranged from 3.25 ± 0.13 MPa to 6.5 ± 0.8 MPa and the initial Modulus was in a range of 3.34 ± 0.15 MPa to 7.02 ± 1.40 MPa. Elastic CBPLP-Cys could be elongated up to 240 ± 36%. The compressive modulus of BPLP-Cys (0.6) (1:1:0.6 OD:CA:Cys) porous scaffold was 39.60 ± 5.90 KPa confirming the soft nature of the scaffolds. BPLPs also possess great processability for micro/nano-fabrication. We demonstrate the feasibility of using BPLP-Ser nanoparticles (“biodegradable quantum dots”) for in vitro cellular labeling and noninvasive in vivo imaging of tissue engineering scaffolds. The development of BPLPs and CBPLPs represents a new direction in developing fluorescent biomaterials and could impact tissue engineering, drug delivery, bioimaging. PMID:19506254

  7. THERMAL ANALYSIS AND STRUCTURE STUDIES ON THE BLENDS OF LIQUID CRYSTALLINE COPOLYESTERS AND PET, PBT

    Institute of Scientific and Technical Information of China (English)

    XIE Ping; LU Daohui

    1987-01-01

    The apparent uniform blends of liquid crystalline aromatic copolyesters and semiflexible polyesters PET or PBT were obtained by mechanical mixing in the molten state within certain range of composition.The effects of blending with liquid crystalline components on the structure of homopolyester matrix were examined by thermal analysis and X-ray diffraction. These results suggest that the LC component in the blend may possibly be acting as a nucleating agent, or it may induce axial orientation of molecules promoting the local ordering of matrix. For the blends of PET, these influences mainly display in narrowing the width of cold crystalline peak and enhancing the main peak of x-ray diffraction; and for the blends of PBT, the pre-melting crystalline peak was enhanced.

  8. PREPARATION OF LIQUID CRYSTALLINE COPOLYESTERS WITH SPACERS BASED ON BISPHENOL- A,BISPHENOL- S OR POLYSULFONE BY DIRECT POLYCONDENSATION

    Institute of Scientific and Technical Information of China (English)

    WANG Pingping; ZHANG Hongzhi

    1989-01-01

    Four series of copolyesters were synthesized by direct polycondensation reaction between aromatic dicarboxylic acids and bisphenols by using tosyl chloride and N, N-dimethylformamide ( DMF ) in pyridine under mild conditions. The electron-rich hydroxyl groups of bisphenols favoured the polycondensation reaction and the order of relative reactivities of bisphenols is as follow:bisphenol-A > hydroquinone ~ bisphenol-S > chlorohydroquinone .Themesomorphic properties of copolyesters were examined by birefringence under polarizing microscope, melt transparency, DSC and X-ray diffraction . The minimum molar fraction of mesogenic units needed for the appearance of liquid crystallinity is not higher than 0.1 despite of the different varieties and lengths of the spacers studied.

  9. Bacterial isolates degrading aliphatic polycarbonates.

    Science.gov (United States)

    Suyama, T; Hosoya, H; Tokiwa, Y

    1998-04-15

    Bacteria that degrade an aliphatic polycarbonate, poly(hexamethylene carbonate), were isolated from river water in Ibaraki. Prefecture, Japan, after enrichment in liquid medium containing poly(hexamethylene carbonate) suspensions as carbon source, and dilution to single cells. Four of the strains, 35L, WFF52, 61A and 61B2, degraded poly(hexamethylene carbonate) on agar plate containing suspended poly(hexamethylene carbonate). Degradation of poly(hexamethylene carbonate) was confirmed by gel permeation chromatography. Besides poly(hexamethylene carbonate), the strains were found to degrade poly(tetramethylene carbonate). The strains were characterized morphologically, physiologically, and by 16S rDNA sequence analysis. Strains 35L and WFF52 were tentatively identified as Pseudomonas sp. and Variovorax sp., respectively, while strains 61A and 61B2 constitute an unidentified branch within the beta subclass of the Proteobacteria.

  10. Dynamic Mechanical Analysis and Three-Body Abrasive Wear Behaviour of Thermoplastic Copolyester Elastomer Composites

    Directory of Open Access Journals (Sweden)

    Hemanth Rajashekaraiah

    2014-01-01

    Full Text Available Various amounts of short fibers (glass and carbon and particulate fillers like polytetrafluoroethylene (PTFE, silicon carbide (SiC, and alumina (Al2O3 were systematically introduced into the thermoplastic copolyester elastomer (TCE matrix for reinforcement purpose. The mechanical properties such as storage modulus, loss modulus, and Tan δ by dynamic mechanical analysis (DMA and three-body abrasive wear performance on a dry sand rubber wheel abrasion tester have been investigated. For abrasive wear study, the experiments were planned according to L27 orthogonal array by considering three factors and three levels. The complex moduli for TCE hybrid composites were pushed to a higher level relative to the TCE filled PTFE composite. At lower temperatures (in the glassy region, the storage modulus increases with increase in wt.% of reinforcement (fiber + fillers and the value is maximum for the composite with 40 wt.% reinforcement. The loss modulus and damping peaks were also found to be higher by the incorporation of SiC and Al2O3 microfillers. The routine abrasive wear test results indicated that TCE filled PTFE composite exhibited better abrasion resistance. Improvements in the abrasion resistance, however, have not been achieved by short-fiber and particlaute filler reinforcements. From the Taguchi’s experimental findings, optimal combination of control factors were obtained for minimum wear volume and also predictive correlations were proposed. Further, the worn surface morphology of the samples was discussed.

  11. Synthesis and characterization of thermoplastic copolyester elastomers modified with fumaric moieties

    Directory of Open Access Journals (Sweden)

    JASNA DJONLAGIC

    2001-03-01

    Full Text Available A series of poly(ether-esters derived from dimethyl terephthalate (DMT, dimethyl fumarate (DMF, 1,4-butandiol (BD and poly(tetramethylene oxide (PTMO,Mn = 1000 g/mol was synthesized in a two stage process involving transesterification and polycondensation in the melt. The mole ratio of the starting components was selected to result in copolymers with a constant hard:soft segment wieght ratio (56:44. The amount of DMF was 10 mol %, referred to the total amount of the esters used. The synthesis was optimized in terms of both the concentration of catalyst, tetra-n-butyl-titanate, Ti(OBu4 and thermal stabilizer N,N’-diphenyl-p-phenylenediamine, DPPD, as well as the temperature. The composition and structure of the synthesized poly(ether-esters were characterized by 1H-NMR. The number average molecular weights of the polymers calculated from the 1H-NMR spectra were compared with the corresponding values of the inherent viscosity (hinh in m-cresol and the complex dynamic viscosity (h *. The effect of the content of fumaric residues on the thermal properties of the synthesized copolyesters was also investigated using differential scanning calorimetry (DSC and thermal gravimetric analysis (TGA.

  12. 磷系阻燃共聚酯的结构与性能%Structure and Properties of Phosphorus Flame Retardant Copolyester

    Institute of Scientific and Technical Information of China (English)

    黄意龙; 龚静华; 杨曙光; 马敬红; 徐坚

    2012-01-01

    A series of flame retardant copolyesters were prepared by polymerization reaction using phos phorus flame retardant CEPPA as the third monomers. The chemical composition, sequence distribution, crystallization property, phosphorus content and limiting oxygen index of the flame retardant copolyester were characterized by means of NMR, DSC, elemental analysis and limiting oxygen index instrument. Results showed that a majority of CEPPA units were copolymerized into the copolyester chains in a form of random distribution; part of CEPPA units were copolymerized in the flame retardant polyesters in a form of short segment, and the random coefficient of the copolyester decreased as the flame retardant contents increased. Compared with PET, Tg, Wm and degree of crystallinity of the flame retardant copolyester decreased, which was ascribed to the decline of the regularity of the copolyesters chains. Moreover, limit- ing oxygen index values also increased with the increasing of the flame retardant content, as the phosphor- us content of the flame retardant copolyester was 9.08 mg/g, the limiting oxygen index values can be more than 33%.%采用磷系阻燃剂2-羧乙基苯基次磷酸(CEPPA)作为第3单体,通过聚合反应制备了含磷的阻燃共聚酯。采用核磁共振、DSC、元素分析和极限氧指数仪表征阻燃共聚酯的化学组成、序列分布、结晶性能、磷含量和极限氧指数。结果表明:大部分CEPPA单元以无规分布的形式共聚到聚酯分子链中,小部分CEPPA单元以短嵌段的形式共聚在聚酯分子链中,且随着阻燃剂含量增加,无规系数变小。由于分子链的规整性下降,与聚对苯二甲酸乙二酯(PET)相比,阻燃共聚酯的Tg和Tm下降,结晶度减小。随阻燃剂含量的增加,极限氧指数值增加,当阻燃共聚酯中的磷含量达到9.08mg/g时,极限氧指数值达到33%以上。

  13. Synthesis of New Phosphorus-Containing (CoPolyesters Using Solid-Liquid Phase Transfer Catalysis and Product Characterization

    Directory of Open Access Journals (Sweden)

    Gheorghe Ilia

    2012-07-01

    Full Text Available This paper is directed towards the development of safe, and thermally stable solid polymer electrolytes. Linear phosphorus-containing (copolyesters are described, including their synthesis, thermal analysis, conductivity, and non-flammability. Polycondensation of phenylphosphonic dichloride (PPD with poly(ethylene glycol (PEG 12000 with and without bisphenol A (BA was carried out using solid-liquid phase transfer catalysis. Potassium phosphate is used as base. Yields in the range of 85.0–88.0%, and inherent viscosities in the range of 0.32–0.58 dL/g were obtained. The polymers were characterized by gel permeation chromatography, FT-IR, 1H- and 31P-NMR spectroscopy and thermal analysis. Their flammability was investigated by measuring limiting oxygen index values. The polymers are flame retardants and begin to lose weight in the 190 °C–231 °C range. Solid phosphorus- containing (copolyesters were complexed with lithium triflate and the resulting ionic conductivity was determined. Conductivities in the range of 10−7–10−8 S cm−1 were obtained.

  14. CCN activity of aliphatic amine secondary aerosol

    Science.gov (United States)

    Tang, X.; Price, D.; Praske, E.; Vu, D.; Purvis-Roberts, K.; Silva, P. J.; Cocker, D. R., III; Asa-Awuku, A.

    2014-01-01

    Aliphatic amines can form secondary aerosol via oxidation with atmospheric radicals (e.g. hydroxyl radical and nitrate radical). The particle composition can contain both secondary organic aerosol (SOA) and inorganic salts. The fraction of organic to inorganic materials in the particulate phase influences aerosol hygroscopicity and cloud condensation nuclei (CCN) activity. SOA formed from trimethylamine (TMA) and butylamine (BA) reactions with hydroxyl radical (OH) is composed of organic material of low hygroscopicity (single hygroscopicity parameter, κ ≤ 0.25). Secondary aerosol formed from the tertiary aliphatic amine (TMA) with N2O5 (source of nitrate radical, NO3), contains less volatile compounds than the primary aliphatic amine (BA) aerosol. TMA + N2O5 form semi-volatile organics in low RH conditions that have κ ~ 0.20, indicative of slightly soluble organic material. As RH increases, several inorganic amine salts are formed as a result of acid-base reactions. The CCN activity of the humid TMA-N2O5 aerosol obeys Zdanovskii, Stokes, and Robinson (ZSR) ideal mixing rules. Higher CCN activity (κ > 0.3) was also observed for humid BA+N2O5 aerosols compared with dry aerosol (κ ~ 0.2), as a result of the formation of inorganic salts such as NH4NO3 and butylamine nitrate (C4H11N · HNO3). Compared with TMA, BA+N2O5 reactions produce more volatile aerosols. The BA+N2O5 aerosol products under humid experiments were found to be very sensitive to the temperature within the stream-wise continuous flow thermal gradient CCN counter. The CCN counter, when set above a 21 °C temperature difference, evaporates BA+N2O5 aerosol formed at RH ≥ 30%; κ ranges from 0.4 to 0.7 and is dependent on the instrument supersaturation (ss) settings. The aerosol behaves non-ideally, hence simple ZSR rules cannot be applied to the CCN results from the primary aliphatic amine system. Overall, aliphatic amine aerosol systems κ ranges from 0.2 CCN activity. Thermal gradient CCN

  15. CCN activity of aliphatic amine secondary aerosol

    Directory of Open Access Journals (Sweden)

    X. Tang

    2014-01-01

    Full Text Available Aliphatic amines can form secondary aerosol via oxidation with atmospheric radicals (e.g. hydroxyl radical and nitrate radical. The particle composition can contain both secondary organic aerosol (SOA and inorganic salts. The fraction of organic to inorganic materials in the particulate phase influences aerosol hygroscopicity and cloud condensation nuclei (CCN activity. SOA formed from trimethylamine (TMA and butylamine (BA reactions with hydroxyl radical (OH is composed of organic material of low hygroscopicity (single hygroscopicity parameter, κ ≤ 0.25. Secondary aerosol formed from the tertiary aliphatic amine (TMA with N2O5 (source of nitrate radical, NO3, contains less volatile compounds than the primary aliphatic amine (BA aerosol. TMA + N2O5 form semi-volatile organics in low RH conditions that have κ ~ 0.20, indicative of slightly soluble organic material. As RH increases, several inorganic amine salts are formed as a result of acid-base reactions. The CCN activity of the humid TMA-N2O5 aerosol obeys Zdanovskii, Stokes, and Robinson (ZSR ideal mixing rules. Higher CCN activity (κ > 0.3 was also observed for humid BA+N2O5 aerosols compared with dry aerosol (κ ~ 0.2, as a result of the formation of inorganic salts such as NH4NO3 and butylamine nitrate (C4H11N · HNO3. Compared with TMA, BA+N2O5 reactions produce more volatile aerosols. The BA+N2O5 aerosol products under humid experiments were found to be very sensitive to the temperature within the stream-wise continuous flow thermal gradient CCN counter. The CCN counter, when set above a 21 °C temperature difference, evaporates BA+N2O5 aerosol formed at RH ≥ 30%; κ ranges from 0.4 to 0.7 and is dependent on the instrument supersaturation (ss settings. The aerosol behaves non-ideally, hence simple ZSR rules cannot be applied to the CCN results from the primary aliphatic amine system. Overall, aliphatic amine aerosol systems κ ranges from 0.2 < κ < 0.7. This work indicates that

  16. A biocatalytic approach towards sustainable furanic-aliphatic polyesters

    NARCIS (Netherlands)

    Jiang, Yi; Woortman, Albert J. J.; van Ekenstein, Gert O. R. Alberda; Loos, Katja

    2015-01-01

    An eco-friendly approach towards furanic-aliphatic polyesters as sustainable alternatives to aromatic-aliphatic polyesters is presented. In this approach, biobased dimethyl 2,5-furandicarboxylate (DMFDCA) is polymerized with various (potentially) renewable aliphatic diols via Candida antarctica Lipa

  17. Hydrolytic And Enzymatic Degradation Characteristics Of Biodegradable Aliphatic Polysters

    Institute of Scientific and Technical Information of China (English)

    LI Suming

    2004-01-01

    Aliphatic polyesters, especially those derived from lactide (PLA), glycolide (PGA) and ε-caprolactone (PCL), are being investigated worldwide for applications in the field of surgery (suture material, devices for internal bone fracture fixation), pharmacology (sustained drug delivery systems), and tissue engineering (scaffold for tissue regeneration) [1,2]. This is mainly due to their good biocompatibility and variable degradability. These polymers present also a growing interest for environmental applications in agriculture (mulch films) and in our everyday life (packaging material)as the development of biodegradable materials is now considered as one of the potential solutions to the problem of plastic waste management.For both biomedical and environmental applications, it is of major importance to understand the degradation characteristics of the polymers. The hydrolytic degradation of aliphatic polyesters has been investigated by many research groups. Our group has shown that degradation of PLAGA large size devices is faster inside than at the surface. This heterogeneous degradation is due to the autocatalytic effect of carboxylic endgroups formed by ester bond cleavage. Moreover,degradation-induced morphological and compositional changes were also elucidated. In the case of PCL, the hydrolytic degradation is very slow due to its hydrophobicity and crystallinity.The enzymatic degradation of these polymers has been investigated by a number of authors. A specific enzyme, proteinase K, has been shown to have significant effects on PLA degradation. This enzyme preferentially degrade L-lactate units as opposed to D-lactate ones, amorphous zones as opposed to crystalline ones [3]. The enzymatic degradation of PCL polymers has also been investigated. A number of lipase-type enzymes were found to significantly accelerate the degradation of PCL despite its high crystallinity. In the case of PLA/PCL blends, the two components exhibited well separated crystalline domains

  18. Identification of micro-pollutant sources in urban areas. Advantage of aliphatic hydrocarbons

    International Nuclear Information System (INIS)

    In urban areas, important amounts of hydrocarbons are released in the environment and a significant part of these pollutants concentrate in the sewage system leading to environmental problems. Many studies are based only on the study of polycyclic aromatic hydrocarbons (PAH) to identify the origin of environmental contamination. This work aims at demonstrating the advantage of aliphatic hydrocarbons (n-alkanes) in the identification of pollutant sources in urban environments. Their specificity and relative distribution allow the identification and follow up of many hydrocarbon generating sources. The analysis of aliphatic hydrocarbon pathways has permitted to build up an important database for the signature of these pollutants. The coarse fraction of the sewage sludges is mainly contaminated by exhaust particulates and lubricating oils, while the organic fraction and the bio-film concentrate the biological and petroleum product contributions. The estimation of the level of degradation of aliphatic hydrocarbons indicates a shorter residence time in the organic and bio-film layer with respect to the coarse deposit. (J.S.)

  19. Corrosion inhibition of brass by aliphatic amines

    International Nuclear Information System (INIS)

    Aliphatic amines hexylamine (HCA), octylamine (OCA) and decylamine (DCA) have been used as corrosion inhibitors for (70/30) brass in 0.I M HCIO4. The inhibitor efficiency (%P) calculated using weight loss, Tafel extrapolation, linear polarization and impedance methods was found to be in the order DCA> OCA> HCA. These adsorb on brass surface following bockris-swinkels' isotherm. DCA, OCA and HCA displaced 4, 3 and 2 molecules of water from interface respectively. Displacement of water molecules brought a great reorganization of double layer at the interface. These amines during corrosion form complexes with dissolved zinc and copper ions.(Author)

  20. Biodegradation of aliphatic and aromatic polycarbonates.

    Science.gov (United States)

    Artham, Trishul; Doble, Mukesh

    2008-01-01

    Polycarbonate is one of the most widely used engineering plastics because of its superior physical, chemical, and mechanical properties. Understanding the biodegradation of this polymer is of great importance to answer the increasing problems in waste management of this polymer. Aliphatic polycarbonates are known to biodegrade either through the action of pure enzymes or by bacterial whole cells. Very little information is available that deals with the biodegradation of aromatic polycarbonates. Biodegradation is governed by different factors that include polymer characteristics, type of organism, and nature of pretreatment. The polymer characteristics such as its mobility, tacticity, crystallinity, molecular weight, the type of functional groups and substituents present in its structure, and plasticizers or additives added to the polymer all play an important role in its degradation. The carbonate bond in aliphatic polycarbonates is facile and hence this polymer is easily biodegradable. On the other hand, bisphenol A polycarbonate contains benzene rings and quaternary carbon atoms which form bulky and stiff chains that enhance rigidity. Even though this polycarbonate is amorphous in nature because of considerable free volume, it is non-biodegradable since the carbonate bond is inaccessible to enzymes because of the presence of bulky phenyl groups on either side. In order to facilitate the biodegradation of polymers few pretreatment techniques which include photo-oxidation, gamma-irradiation, or use of chemicals have been tested. Addition of biosurfactants to improve the interaction between the polymer and the microorganisms, and blending with natural or synthetic polymers that degrade easily, can also enhance the biodegradation.

  1. The influence of composition of porous copolyester scaffolds on reactions induced by irradiation sterilization.

    Science.gov (United States)

    Odelius, Karin; Plikk, Peter; Albertsson, Ann-Christine

    2008-01-01

    In our previous work regarding radiation sterilization of porous scaffolds we have concluded that the composition and microstructure of the polymer chain are a key factor influencing the degradation reactions occurring upon irradiation. In this work we in contrast reported on the effects of high-energy irradiation on the thermal and mechanical properties. Electron beam (EB)- and gamma-irradiation sterilization were used in order to finalize the properties of a series of porous scaffolds comprised of different aliphatic polyester copolymers. The results presented here show that, for both sterilization methods, the crystallinity increased for all copolymers of 1,5-dioxepan-2-one (DXO) and l,l-lactide (LLA) at the minimum sterilization dose. The same was true of the epsilon-caprolactone (CL)- and LLA-containing copolymers upon EB sterilization, while a reduction in crystallinity were found upon gamma-irradiation. As was anticipated, it was shown that crystallinity also is a characteristic of the copolymer influencing the effects of the irradiation-induced reactions. Both the onset temperature and the temperature corresponding to the maximum rate of weight loss increased after irradiation and hence the thermal stability was increased. This is a result of a simultaneous lengthening of the chains by cross-linking reactions and a shortening by random chain-scissions occurring throughout the molecule, which lead to the formation of new endgroups with higher thermal stability. Scaffolds of crystalline polymers retained more of their initial tensile properties after irradiation compared to amorphous materials. The result previously published, showing that the composition was a key factor influencing the degradation reactions occurring upon irradiation, was augmented here. PMID:17936898

  2. Thermal stability of aliphatic hyperbranched polyesters

    Directory of Open Access Journals (Sweden)

    Vuković Jasna

    2002-01-01

    Full Text Available The influence of the molar mass (generation, number and type of end groups on the thermal stability of aliphatic hyperbranched polyesters are presented in this study. Different end groups were obtained by modification of the samples with chlorides of propionic acid and stearic acid. The thermal stability of the hyperbranched polyesters was determined by thermogravimetry using a NET-ZSCH TG 209 instrument in nitrogen atmosphere at a heating rate of 10°C/min. A comparison of the temperatures obtained for mass losses of 5 20 and 40 wt% for unmodified samples showed that the thermal stability increased up to the fourth generation and then remained practically constant. An increase in the thermal stability of modified samples of the second, third and fourth generation was observed.

  3. Biodegradation of aliphatic and aromatic polycarbonates.

    Science.gov (United States)

    Artham, Trishul; Doble, Mukesh

    2008-01-01

    Polycarbonate is one of the most widely used engineering plastics because of its superior physical, chemical, and mechanical properties. Understanding the biodegradation of this polymer is of great importance to answer the increasing problems in waste management of this polymer. Aliphatic polycarbonates are known to biodegrade either through the action of pure enzymes or by bacterial whole cells. Very little information is available that deals with the biodegradation of aromatic polycarbonates. Biodegradation is governed by different factors that include polymer characteristics, type of organism, and nature of pretreatment. The polymer characteristics such as its mobility, tacticity, crystallinity, molecular weight, the type of functional groups and substituents present in its structure, and plasticizers or additives added to the polymer all play an important role in its degradation. The carbonate bond in aliphatic polycarbonates is facile and hence this polymer is easily biodegradable. On the other hand, bisphenol A polycarbonate contains benzene rings and quaternary carbon atoms which form bulky and stiff chains that enhance rigidity. Even though this polycarbonate is amorphous in nature because of considerable free volume, it is non-biodegradable since the carbonate bond is inaccessible to enzymes because of the presence of bulky phenyl groups on either side. In order to facilitate the biodegradation of polymers few pretreatment techniques which include photo-oxidation, gamma-irradiation, or use of chemicals have been tested. Addition of biosurfactants to improve the interaction between the polymer and the microorganisms, and blending with natural or synthetic polymers that degrade easily, can also enhance the biodegradation. PMID:17849431

  4. Structure-property relationship in aliphatic polyamide/polyaniline surface layered composites

    Energy Technology Data Exchange (ETDEWEB)

    Fatyeyeva, K., E-mail: kateryna.fatyeyeva@univ-rouen.fr [Institute of Bioorganic Chemistry and Petrochemistry of National Academy of Science of Ukraine, 50 Kharkivske shose, Kyiv 02160 (Ukraine); Laboratoire de Physique de l' Etat Condense, UMR CNRS 6087, Universite du Maine, Av. Olivier Messiaen, 72085 Le Mans cedex 9 (France); Laboratoire Polymeres, Biopolymeres et Surfaces, UMR 6270 and FR 3038 CNRS, Universite de Rouen, Bd. Maurice de Broglie, 76821 Mont Saint Aignan cedex (France); Pud, A.A. [Institute of Bioorganic Chemistry and Petrochemistry of National Academy of Science of Ukraine, 50 Kharkivske shose, Kyiv 02160 (Ukraine); Bardeau, J.-F.; Tabellout, M. [Laboratoire de Physique de l' Etat Condense, UMR CNRS 6087, Universite du Maine, Av. Olivier Messiaen, 72085 Le Mans cedex 9 (France)

    2011-10-17

    Highlights: {yields} Synthesis of surface conducting polymers based on aliphatic polyamides and polyaniline. {yields} The study revealed the layered structure of the surface conductive composites. {yields} Different dielectric relaxation processes were found as a function of doping agent and polyaniline oxidation state. {yields} Conductivity value (10{sup -4}-10{sup -11} S cm{sup -1}) enables the use of such composites as antistatic/electrostatic discharge materials. - Abstract: Conducting polymer composite films based on different aliphatic polyamides (PA) (PA-6, PA-11 and PA-12) have been synthesized by in situ aniline polymerization inside a surface layer of the PA host matrix. Dielectric permittivity and dielectric loss of these films are explained in terms of the interfacial polarization. The real part of permittivity is found to be higher in the PA/polyaniline (PANI) composite films than in the virgin PA polymer matrix. Such behaviour is attributed to the interaction between PA and PANI molecular chains and to the conductivity increase after the aniline polymerization. The performed confocal Raman spectrometry and X-ray diffraction studies also confirmed the presence of interactions between PA and PANI molecular chains.

  5. PET共聚酯的热性能及其纤维的力学性能%Thermal Properties of Copolyester and its Fiber's Mechanical Properties

    Institute of Scientific and Technical Information of China (English)

    胡俊; 李文刚

    2011-01-01

    直接酯化法合成了一系列聚对苯二甲酸乙二酯(PET) -间苯二甲酸双羟乙酯磺酸钠(SIPE)-聚乙二醇(PEG)共聚酯,以差示扫描量热分析法(DSC)研究了这些共聚酯及纯PET的熔融和结晶过程,并利用万能材料测试仪研究了纤维的力学性能.试验结果表明:加入SIPE和PEG后,共聚酯熔点(Tm)、玻璃化转变温度(Tg)降低;随着PEG相对分子质量的增大,PET共聚酯的Tg、冷结晶温度(T∞)、Tm、结晶温度降低(Tc),纤维的断裂强度和初始模量下降,断裂伸长率增加.%The PET-SIPE-PEG copolymer were synthesized through direct esterification. The melting and crystallization processes of copolyester were studied by differential scanning calorimetry (DSC). The mechanical properties were investigated using universal material tester. The results showed that with the increase of PEG molecular weight, glass transition temperature(Tg), cool crystallization temperatureCT,,.), melting temperature(Tm) and crystallization temperature(Tc) of the copolyester decreased, fiber relative strength, initial modulus decreased, the elongation rate increased.

  6. Ecotoxicologically based environmental risk limits for several volatile aliphatic hydrocarbons

    NARCIS (Netherlands)

    Jong FMW de; Posthuma-Doodeman CJAM; Verbruggen EMJ; SEC

    2007-01-01

    This report describes ecotoxicological environmental risk limits derived for a number of volatile aliphatic hydrocarbons. On the basis of evaluated literature, the National Institute for Public Health and the Environment (RIVM) proposes ecotoxicological environmental risk limits for these compounds

  7. ANAEROBIC AND AEROBIC TREATMENT OF CHLORINATED ALIPHATIC COMPOUNDS

    Science.gov (United States)

    Biological degradation of 12 chlorinated aliphatic compounds (CACs) was assessed in bench-top reactors and in serum bottle tests. Three continuously mixed daily batch-fed reactor systems were evaluated: anaerobic, aerobic, and sequential-anaerobic-aerobic (sequential). Glucose,...

  8. Aliphatic nitro alcohols. Synthesis, chemical transformations and applications

    Energy Technology Data Exchange (ETDEWEB)

    Shvekhgeimer, Mai-Genrikh A [A.N. Kosygin Moscow State Textile Academy, Moscow (Russian Federation)

    1998-01-31

    The data on the synthesis, chemical transformations and practical use of aliphatic nitro alcohols published over the last 25 years are described systematically and analysed. The bibliography includes 316 references.

  9. Polarized Emission of Wholly Aromatic Bio-Based Copolyesters of a Liquid Crystalline Nature

    Directory of Open Access Journals (Sweden)

    Daisaku Kaneko

    2011-05-01

    Full Text Available A novel thermotropic liquid crystalline polymers poly{3-benzylidene amino-4-hydroxybenzoic acid (3,4-BAHBA-co-trans-4-hydroxycinnamic acid (4HCA: trans-coumaric acid} (Poly(3,4-BAHBA-co-4HCA, was synthesized by the thermal polycondensation of 4HCA and 3,4-BAHBA, which was synthesized by a reaction of 3-amino-4-hydroxybenzoic acid (3,4-AHBA with benzaldehyde. When the 4HCA compositions of Poly(3,4-BAHBA-co-4HCAs were above 55 mol%, the copolymers showed a nematic, liquid crystalline phase. Differential scanning calorimetry (DSC measurements of the copolymers showed a high glass transition temperature of more than 100 °C, sufficient for use in engineering plastics. Furthermore, the copolymers showed photoluminescence in an N-methylpyrrolidone (NMP solution under ultraviolet (UV light with a wavelength of 365 nm. Oriented film of Poly(3,4-BAHBA-co-4HCA with a 4HCA composition of 75 mol% emitted polarized light, which was confirmed by fluorescent spectroscopy equipped with parallel and crossed polarizers.

  10. Differential effects of indole and aliphatic glucosinolates on lepidopteran herbivores.

    Science.gov (United States)

    Müller, René; de Vos, Martin; Sun, Joel Y; Sønderby, Ida E; Halkier, Barbara A; Wittstock, Ute; Jander, Georg

    2010-08-01

    Glucosinolates are a diverse group of defensive secondary metabolites that is characteristic of the Brassicales. Arabidopsis thaliana (L.) Heynh. (Brassicaceae) lines with mutations that greatly reduce abundance of indole glucosinolates (cyp79B2 cyp79B3), aliphatic glucosinolates (myb28 myb29), or both (cyp79B2 cyp79B3 myb28 myb29) make it possible to test the in vivo defensive function of these two major glucosinolate classes. In experiments with Lepidoptera that are not crucifer-feeding specialists, aliphatic and indole glucosinolates had an additive effect on Spodoptera exigua (Hübner) (Lepidoptera: Noctuidae) larval growth, whereas Trichoplusia ni (Hübner) (Lepidoptera: Noctuidae) and Manduca sexta (L.) (Lepidoptera: Sphingidae) were affected only by the absence of aliphatic glucosinolates. In the case of two crucifer-feeding specialists, Pieris rapae (L.) (Lepidoptera: Pieridae) and Plutella xylostella (L.) (Lepidoptera: Plutellidae), there were no major changes in larval performance due to decreased aliphatic and/or indole glucosinolate content. Nevertheless, choice tests show that aliphatic and indole glucosinolates act in an additive manner to promote larval feeding of both species and P. rapae oviposition. Together, these results support the hypothesis that a diversity of glucosinolates is required to limit the growth of multiple insect herbivores. PMID:20617455

  11. Synthesis of a new electrolyte by co-poly-esters doped with sodium dodecyl sulfate for application on PEM fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Fiuza, J.R.A.; Boaventura, F.J.S.; Jose, N.M.; Bresciani, D. [Univ. Federal da Bahia, Salvador (Brazil). Dept. of Physical Chemistry

    2009-07-01

    Proton exchange membrane fuel cells (PEMFCs) use polymer membranes as electrolytes and protons as conductors. This paper reported on a study in which co-polyesters were doped with sodium dodecyl sulfate. The co-polymers were synthesized by a copolymerization process that used terephthalic and adipic acids with glycerol. A reactor was used to process the material, which was then hot-pressed to produce homogenous and flexible plates. X-ray diffraction (XRD) scanning electron microscopy (SEM), thermogravimetric, direct scanning calorimetry (DSC) and Fourier Transform Infrared (FTIR) analyses were conducted. Results of the analyses demonstrated that the composite material was stable up to a temperature of 250 degrees C. A micrographics study showed that MDS was homogeneously dispersed in the polymeric matrix. It was concluded that with an electrical conductivity between 10-7 to 10-1 S per cm, the copolymers were suitable for use in PEMFC applications.

  12. 由环己烷二甲醇和低聚乳酸制备脂肪/芳香共聚酯%Preparation of Aliphatic/Aromatic Copolyesters Based on Cyclohexanedimethanol and Oligo(lactic acid)

    Institute of Scientific and Technical Information of China (English)

    巫民建; 苏吉英; 陈义旺; 贺晓慧; 周魏华

    2009-01-01

    由对苯二甲酸二甲酯(DMT)、1,6-己二醇(HDO)以及1,4-环己烷二甲醇(CHDM)和α-羟基-ω-羧基DL-低聚乳酸(OLA)在催化剂钛酸四丁酯下熔融缩聚合成了一系列可生物降解共聚酯聚(对苯二甲酸环己烷二甲醇酯-co-对苯二甲酸己二酯-co-乳酸)(PHCTL). 采用核磁共振仪(1H NMR)、差示扫描量热仪(DSC)、热重分析(TG)和广角X射线衍射(WAXS)测试技术对共聚酯进行了表征. 结果表明,共聚酯的熔点(Tm),比聚(对苯二甲酸己二醇酯-co-乳酸)(PHTL)增加40~120 ℃,热分解温度(Td)增加20~40 ℃. 当环己烷二甲醇在二元醇投料中占30%~70

  13. Microstructure and properties of phosphorus flame retardant copolyester fiber%磷系阻燃共聚酯纤维的微观结构与性能

    Institute of Scientific and Technical Information of China (English)

    房长婧; 梁倩倩; 龚静华; 马敬红; 徐坚

    2011-01-01

    采用共聚改性法制备了不同磷含量的阻燃共聚酯纤维,采用差示扫描量热法(DSC)、X射线衍射等方法表征阻燃共聚酯纤维的微观结构,并对纤维的热收缩性、柔软性和染色性能进行测试.结果表明:磷系阻燃剂的加入,纤维的结晶度和晶粒尺寸减小,玻璃化转变温度和熔点下降,纤维的干热收缩率和沸水收缩率增加,柔软性提高,染色性能得到改善,上染率达90%以上,纤维的断裂强度均在3.0 cN/dtex以上.%Flame retardant copolyester fibers containing different phosphor content were prepared by copolymerization modification. The microsttucture of flame retardant copolyester fiber was characterized by differential scanning calorimetry (DSC) and Xray diffraction method. The thermal shrinkage, tenderness and dyeing behavior of the fiber were measured. The results showed that the crystallinity and crystal size reduced, the glass transition temperature and melting point dropped, the dry hot shrinkage and boiling water shrinkage rose, the tenderness enhanced and the dye up-take increased to above 90% with the addition of the phosphorous flame retardant. The breaking strength of the fibers was all above 3.0 cN/dtex.

  14. Iodine - catalyzed prins cyclization of aliphatic and aromatic ketones

    Energy Technology Data Exchange (ETDEWEB)

    Kishore, K.R.; Reddy, K.; Silva Junior, Luiz F., E-mail: luizfsjr@iq.usp.br [Universidade de Sao Paulo (IQ/USP), SP (Brazil). Inst. de Quimica. Dept. de Quimica Fundamental

    2013-09-15

    Iodine-catalyzed Prins cyclization of homoallylic alcohols and ketones was investigated. Anhydrous conditions and inert atmosphere are not required in this metal-free protocol. The reaction of 2-(3,4-dihydronaphthalene-1-yl)propan-1-ol with six aliphatic symmetric ketones gave the desired products in 67-77% yield. Cyclization was performed with four aliphatic unsymmetric ketones, leading to corresponding pyrans in 66-76% yield. Prins cyclization was also accomplished with four aromatic ketones in 37-66% yield. Finally, Prins cyclization of the monoterpene isopulegol and acetone was successfully achieved. (author)

  15. Introducing Aliphatic Substitution with a Discovery Experiment Using Competing Electrophiles

    Science.gov (United States)

    Curran, Timothy P.; Mostovoy, Amelia J.; Curran, Margaret E.; Berger, Clara

    2016-01-01

    A facile, discovery-based experiment is described that introduces aliphatic substitution in an introductory undergraduate organic chemistry curriculum. Unlike other discovery-based experiments that examine substitution using two competing nucleophiles with a single electrophile, this experiment compares two isomeric, competing electrophiles…

  16. Cloud condensation nuclei activity of aliphatic amine secondary aerosol

    Science.gov (United States)

    Aliphatic amines can form secondary aerosol via oxidation with atmospheric radicals (e.g. hydroxyl radical and nitrate radical). The resulting particle composition can contain both secondary organic aerosol (SOA) and inorganic salts. The fraction of organic to inorganic materials in the particulate ...

  17. ODD-EVEN EFFECT OF LYOTROPIC LIQUID CRYSTALLINE PROPERTIES OF AROMATIC-ALIPHATIC COPOLYAMIDES

    Institute of Scientific and Technical Information of China (English)

    Xiao-zhong Lu; Yan-qing Lian; Xiao-gong Wang; Qi-xiang Zhou; Dc-shah Liu

    2001-01-01

    A series of aromatic-aliphatic copolyamides containing different aliphatic diamine units was synthesized by low temperature solution polycondensation. The liquid crystalline critical concentration (c*) and liquid crystalline critical temperature (7*) of these copolyamides exhibited an odd-even zigzag effect with the odd-even variation of carbon atom number in the aliphatic dimes used.

  18. Biodegradability of unsaturated aliphatic polyesters prepared from fumaric acid%以反丁烯二酸合成的不饱和脂肪族聚酯的生物降解性研究

    Institute of Scientific and Technical Information of China (English)

    杨群; 陆大年; 崔进

    2013-01-01

    Unsaturated aliphatic polyesters and copolyesters were prepared from fumaric acid (FA) , dieth-ylene glycol (DEG) and 1,4-butanediol (BD) by melt poly condensation method. Enzymatic degradation was performed at 37 ℃ in phosphate buffer solution with porcine pancreas lipase, effect of structures, compositions and cross-linking degrees of carbon-carbon double bonds of polyesters on the biodegradability were discussed. The results indicated that, as the C=C double bond introduced into the backbone of solid polyesters, Tm value and crystallinity increased. The degradability of aliphatic polyesters by lipases depended strongly on their Tm values and crystallinity, the higher the Tm and crystallinity, the lower the degradability . The result also indicated that the thermal properties ( Tm value and - △Hm value) and crystallinity of polyesters increased after partially enzymatic degradation, the biodegradation of unsaturated aliphatic polyester became smaller after cross-linked, and the higher the cross-linking degree, the smaller the biodegradation.%以反丁烯二酸、一缩二乙二醇和1,4-丁二醇为原料,采用熔融缩聚法合成了不饱和脂肪族聚酯和共聚酯,在37℃下,用含有脂肪酶的磷酸缓冲溶液对聚酯的生物降解性进行了研究,讨论了聚酯结构、组成及C=C双键的交联度对生物降解性的影响.结果表明,对于粘稠液体状的聚酯,C=C双键的引入,没有明显的改变其生物降解性;对于固体状的聚酯,C=C双键引入后,熔点(Tm)和结晶度增加;聚酯部分降解后,其热力学性能(Tm、-△Hm)和结晶度都升高;对于交联后的聚酯,交联度越高,生物降解性越差.

  19. Sorption Behavior of an Aliphatic Series of Aldehydes in the Presence of Poly(ethylene terephthalate) Blends Containing Aldehyde Scavenging Agents

    OpenAIRE

    Suloff, Eric Charles

    2002-01-01

    The quality of many beverages and food products is compromised by the presence of low molecular weight aldehydes. Aldehydes are commonly formed during storage by the oxidation of lipids or are introduced as migrants from polymeric packaging material. The objective of this project was to evaluate the effectiveness of three aldehyde scavenging agents, blended into poly(ethylene terephthalate) (PET) films, in removing an aliphatic series of aldehydes from an acidified aqueous model solution (p...

  20. Biodegradation of Trihalomethanes and Other Halogenated Aliphatic Compounds

    Science.gov (United States)

    Smith, G. B.

    1996-01-01

    The biological dehalogenation of common water pollutants such as trichloromethane (chloroform) and other halogenated aliphatic compounds was the subject of this project. Samples from diverse water environments such as from groundwater contaminated with halogenated compounds and wastewaters from regional treatment plants were studied to identify conditions that favor certain dehalogenation reactions over others. Gene probe analyses of DNA extracted from the dichlormethane-degrading wastewater indicated the presence of the gene coding for dichloromethane dehalogenase, indicating the genetic basis for the dechlorination activity observed. These studies indicate that methanogenic bacteria are the organisms responsible for the chloroform dechlorination. Dechlorination of a common chlorofluorocarbon (CFC-11) was identified in samples taken from a regional aquifer contaminated with halogenated aliphatic compounds.

  1. Aliphatics hydrocarbon content in surface sediment from Jakarta Bay, Indonesia

    Science.gov (United States)

    YAzis, M.; Asia, L.; Piram, A.; Doumenq, P.; Syakti, A. D.

    2016-02-01

    Sedimentary aliphatic hydrocarbons content have been studied quantitatively and qualitatively using GC/MS method in eight coastal stations located in the Jakarta Bay, North of Jakarta, Indonesia. The total concentrations n-alkanes have ranged from 480 μg.kg-1to 1,935 μg.kg-1sediment dry weight. Several ratios (e.g. CPI24-32, NAR, TAR, Pr/Phy, n-C17/Pr, n- C18/Phyt,n-C29/n-C17, Ʃn-alkanes/n-C16LMW/HMW, Paq and TMD) were used to evaluate the possible sources of terrestrial-marine inputs of these hydrocarbons in the sediments. The various origins of aliphatic hydrocarbons were generally biogenic, including both terrigenous and marine, with an anthropogenic pyrolytic contribution (petrogenic and biogenic combustion). Two stations (G,H) were thehighest concentration and had potential risk to environment

  2. Manganese-Mediated Coupling Reaction of Vinylarenes and Aliphatic Alcohols

    Science.gov (United States)

    Zhang, Wei; Wang, Nai-Xing; Bai, Cui-Bing; Wang, Yan-Jing; Lan, Xing-Wang; Xing, Yalan; Li, Yi-He; Wen, Jia-Long

    2015-10-01

    Alcohols and alkenes are the most abundant and commonly used organic building blocks in the large-scale chemical synthesis. Herein, this is the first time to report a novel and operationally simple coupling reaction of vinylarenes and aliphatic alcohols catalyzed by manganese in the presence of TBHP (tert-butyl hydroperoxide). This coupling reaction provides the oxyalkylated products of vinylarenes with good regioselectivity and accomplishes with the principles of step-economies. A possible reaction mechanism has also been proposed.

  3. Swift Heavy Ion Induced Modification of Aliphatic Polymers

    OpenAIRE

    Hossain, Umme Habiba

    2015-01-01

    In this thesis, the high energy heavy ion induced modification of aliphatic polymers is studied. Two polymer groups, namely polyvinyl polymers (PVF, PVAc, PVA and PMMA) and fluoropolymers (PVDF, ETFE, PFA and FEP) were used in this work. Polyvinyl polymers were investigated since they will be used as insulating materials in the superconducting magnets of the new ion accelerators of the planned International Facility for Antiproton and Ion Research (FAIR) at the GSI Helmholtz-Centre of Heavy I...

  4. Reactions of aliphatic free radicals with transition metal complexes

    International Nuclear Information System (INIS)

    A pulse radiolytic study of the reactions of copper ions with free aliphatic radicals was carried out. It was found that all the aliphatic radicals studied react with Cusub(aq)sup(+) and Cusub(aq)sup(2+), forming an unstable compound, with a carbon-copper σ bond, according to the reaction Mnsub(aq)sup(n+)+ . CR1R2R3 → M-CR1R2Rsub(3)sup(n+). It was also found that the rates of formation of the intermediate compounds, their half-lives and their decomposition mechanism depend on the properties of the radical and the cation. Experiments for the determination of the influence of macrocyclic ligands of the Curtis type on the stability of intermediate compounds failed because of insufficient concentrations of these ligands. The processes of ligand hydridization, isomerization and decomposition for the macrocylic complexes Cusup(I)L were also studied. These complexes, which are unstable, are formed as a result of the reaction of the stable Cusup(II)L complexes with certain free aliphatic radicals

  5. Cost-Benefit Analysis for Alternatives to Aliphatic Isocyanate Polyurethanes

    Science.gov (United States)

    Lewis, Pattie

    2007-01-01

    NASA and Air Force Space Command (AFSPC) have similar missions and therefore similar facilities and structures in similar environments. The standard practice for protecting metallic substrates in atmospheric environments is the application of an applied coating system. The most common topcoats used in coating systems are polyurethanes that contain isocyanates. Isocyanates are classified as potential human carcinogens and are known to cause cancer in animals. The primary objective of this effort was to demonstrate and validate alternatives to aliphatic isocyanate polyurethanes resulting in one or more isocyanate-free coatings qualified for use at AFSPC and NASA installations participating in this project. This Cost-Benefit Analysis (CBA) quantifies the estimated capital and process costs of coating alternatives and cost savings relative to the current coatings. The estimates in this CBA are to be used for assessing the relative merits of the selected alternatives. The actual economic effects at any specific facility will depend on the alternative material or technology implemented, the number of actual applications converted, future workloads, and other factors . The participants initially considered eighteen (18) alternative coatings as described in the Potential Alternatives Report entitled Potential Alternatives Report for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes, prepared by ITB. Of those, 8 alternatives were selected for testing in accordance with the Joint Test Protocol entitled Joint Test Protocol for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes, and the Field Test Plan entitled Field Evaluations Test Plan for Validation of Alternatives 10 Aliphatic Isocyanate Polyurethanes, both of which were prepared by ITB. A joint Test Report entitled Joint Test Report for Validation of Alternatives to Aliphatic Isocyanate Polyurethanes, prepared by ITB, documents the results of the laboratory and field testing, as well as any

  6. Enhancement of Corrosion Protection of UV Curable Coatings in the Presence of Aliphatic and Aromatic Amine Compounds

    International Nuclear Information System (INIS)

    Corrosion inhibitors based on aromatic amine; 4-carboxy aniline (CA) and aliphatic amine; acrylamide (AA) were prepared. CA and AA amine compounds allowed reacting with epoxidized sunflower oil (ESO) at 130 degree C for 3h to prepare amine adducts ESO/ CA and ESO/ AA, respectively. The adducts were characterized by IR-spectroscopy and oxirane content determination. Different ratio of prepared adduct were added in coating formulations based on epoxy acrylate oligomers to evaluate them as corrosion inhibitors on metal substrates under UV radiation. Corrosion resistance tests and wt loss values were measured for all cured films, in addition to the physical and mechanical measurements. It was found that the coating films containing CA have high resistance for corrosion of metal than AA and the optimum concentration is 0.5%.

  7. Comparison of finishing application for aliphatic polyurethane dispersions and polyurethane/polyacrylate composite emulsions

    OpenAIRE

    Chai, S; Zhang, Zhongyi

    2010-01-01

    Aliphatic and aromatic cationic aqueous polyurethane (PU-1, PU-2), aliphatic anionic aqueous polyurethanes (PU-3, PU-4) were prepared with polyether glycol, polyether polyol, toluene diisocyanate and isophorone diisocyanate as raw materials. The core-shell polyurethane/polyacrylate composite emulsions (PUA-5, PUA-6) as well as interpenetrating PUA composite emulsions (PUA-7,PUA-8) were prepared by seeded emulsion polymerization, the aliphatic anionic aqueous PU dispersions were used as seed p...

  8. Study on Pyrolysis of Newly Developed Copolyester PETG by Pyrolysis-Gas Chromatography-Mass Spectrometry%裂解气相色谱-质谱法研究新型共聚酯PETG的热分解

    Institute of Scientific and Technical Information of China (English)

    喻爱芳; 钱和生

    2004-01-01

    Poly (ethylene glycol-co-cyclohexane 1,4-dimethanol terephthalate) (PETG) is a newly developed copolyester. The thermal degradation of PETG was investigated by pyrolysis-gas chromatography/mass spectroscopy (PY-GC/MS). The pyrolytic gas of PETG at temperatures 300 C, 400 C ,500 C,600 C and 700 C were identified, respectively. The results showed that the pyrolysis products are very different at diferent pyrolysis temperature. At 600 C, the pyrolysis products of PETG were characteristic of PETG composition, which can be used to determine the polymer chemical structure.

  9. Synthesis and Characterization of Aliphatic-Aromatic Hyperbranched Polyesters

    Institute of Scientific and Technical Information of China (English)

    唐黎明; 张晓龙; 邱藤; 刘德山

    2002-01-01

    Hyperbranched polymers possess special architectures and have potential applications in various areas. In this study, two AB2 monomers, dipropyl 5-(hydroxyethoxy) isophthalate (I) and 5-hydroxyethoxyisophthaic acid (II), were prepared. By bulk polycondensation of each monomer, two aliphatic-aromatic hyperbranched polyesters were prepared and characterized by 1H-nuclear magnetic resonance (1H-NMR), differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), and scanning electron microscopy (SEM). Compared with all-aromatic hyperbranched polyesters, the prepared polymers showed lower glass transition temperatures in connection with the moderate decrease in their decomposition temperatures.

  10. Absorbable and biodegradable polymers

    CERN Document Server

    Shalaby, Shalaby W

    2003-01-01

    INTRODUCTION NOTES: Absorbable/Biodegradable Polymers: Technology Evolution. DEVELOPMENT AND APPLICATIONOF NEW SYSTEMS: Segmented Copolyesters with Prolonged Strength Retention Profiles. Polyaxial Crystalline Fiber-Forming Copolyester. Polyethylene Glycol-Based Copolyesters. Cyanoacrylate-Based Systems as Tissue Adhesives. Chitosan-Based Systems. Hyaluronic Acid-Based Systems. DEVELOPMENTS IN PREPARATIVE, PROCESSING, AND EVALUATION METHODS: New Approaches to the Synthesis of Crystalline. Fiber-Forming Aliphatic Copolyesters. Advances in Morphological Development to Tailor the Performance of Me

  11. Synthesis of aliphatic amidediol and used as a novel mixed plasticizer for thermoplastic starch

    Institute of Scientific and Technical Information of China (English)

    Jian She Zhang; Jiu Gao Yu; Ying Wu; Xiao Fei Ma

    2008-01-01

    In this paper,aliphatic amidediol was synthesized and mixed with glycerol used as a plasticizer for preparing thermoplastic starch (AGPTPS).The yield of aliphatic amidediol was 91%.FT-IR expressed that the mixture of aliphatic amidediol and glycerol formed stronger and stable hydrogen bond with starch molecules compared to the native cornstarch.By scanning electron microscope (SEM) native cornstarch granules were proved to transfer to a homogeneous continuous system.After being stored for a period time at room temperature,the mechanical properties of AGPTPS were also studied.As a mixed plasticizer,aliphatic amidediol and glycerol would be practical to extend TPS application scopes.

  12. Polarized Raman spectra and intensities of aliphatic amino acids

    Science.gov (United States)

    Himmler, Hans J.; Eysel, Hans H.

    1989-01-01

    Raman spectra of aliphatic α- L-amino acids, glycine, alanine, and valine were re-investigated both in aqueous solution and deuterium oxide solution. The spectra were taken of the zwitterionic and of the completely deprotonated form of the amino acids. Spectra of leucine and isoleucine were studied in water at the isoelectric point. Spectra were recorded both with parallel and perpendicular polarization and the isotropic and anisotropic scattering components were isolated. The integrated intensities of CH stretch, CC stretch and carboxylate bend vibrations are discussed. Linear relations between the number of CC and CH bonds and the total scattered intensity in the appropriate spectral regions are observed. The sum over the carboxylate modes shows characteristic intensities for the first three members of the aliphatic amino acids. An increase of isotropic scattering of ϱ co 2 near 510 cm -1 with increasing chain length of the amino acid (or with increasing concentration) is interpreted as the result of micelle formation.

  13. Blendas PHB/copoliésteres biodegradáveis : biodegradação em solo Biodegradable PHB/copolyester blends : biodegradation in soil

    Directory of Open Access Journals (Sweden)

    Suzan A. Casarin

    2013-01-01

    Full Text Available Este trabalho apresenta os resultados do comportamento de blendas do polímero biodegradável PHB poli(hidroxibutirato com os copoliésteres também biodegradáveis EastarBio® e Ecoflex®, na composição de 75% de PHB e 25% dos copoliésteres, em contato com solo composto simulado. Foi também avaliada a influência da adição de pó de serra ou farinha de madeira, na proporção de 70% da blenda e 30% de pó de serra (p.d.s.. A biodegradação foi avaliada para amostras após 30, 60 e 90 dias em contato com solo, através de análises gravimétricas, morfológicas e mecânicas. A preparação inicial dos grânulos dos compostos poliméricos foi feita por extrusão, utilizando uma extrusora dupla-rosca e a moldagem dos corpos de prova foi realizada através da moldagem por injeção. Os materiais estudados biodegradam nas condições testadas. A blenda PHB/EastarBio® (75/25 + 30% p.d.s. apresentou maior redução de massa, 29% após 90 dias. Notou-se que a biodegradação se inicia pela superfície do material e que 90 dias são insuficientes para observar alterações internas.This paper reports on blends made with the biodegradable polymers poly(hydroxybutyrate (PHB and Eastar Bio® or Ecoflex® copolyesters, in contact with simulated compound soil. The blends had 75% of PHB and 25% of copolyesters. We also analyzed the influence from adding 30% of powder-wood or wood flour (WPC to 70% of the blend. Biodegradation was analyzed for samples after 30, 60 and 90 days in contact with soil, through thermogravimetric, morphological and mechanical analyses. The initial preparation of the granules of polymeric compounds was made by extrusion, using a twin-screw extruder and the molding of the specimens was performed by injection molding. The analysis indicated material biodegradation under the conditions tested. The PHB/Eastar Bio® blend (75/25 + 30% WPC exhibited the highest degradation with 29% of mass loss at the end of 90 days. Biodegradation

  14. PET Modified with Copolyester of Isosorbide/Maleic Anhydride%异山梨醇-马来酸酐聚酯改性PET的研究

    Institute of Scientific and Technical Information of China (English)

    吴爽; 王鑫; 陈平

    2013-01-01

    PET-c-IS-MA was prepared from PET which modified by copolyester of isosorbide/maleic anhydride through reactive extrusion. PET-c-IS-MA had the similar θg and θm as that of PET and a single phase structure from thermal gravity analysis. PET-c-IS-MA with the maximum amount of 30% IS-MA could remain the thermal properties of PET. PET-c-IS-MA shows higher crystal property than PET for the presence of θc from 125℃ to 130℃ , and hence improved the process characteristics by changing the crystal degree of PET-c-IS-MA. Moreover, PET-c-IS-MA possessed higher water resistance, better stability in acid or alkaline medium and biodegradation.%使用异山梨醇-马来酸酐聚酯改性聚对苯二甲酸乙二醇酯(PET),通过反应性挤出的方法制备了PET-c-IS-MA.PET-c-IS-MA具有与PET接近的玻璃化温度和熔点,而且为一相结构,在不影响PET热性能的前提下,最大填入量可达30%.PET-c-IS-MA具有优良的结晶性能,θ.为125~130℃,有利于通过控制结晶度改善材料的加工性能.同时,PET-c-IS-MA也具有更好的耐水性能、耐酸碱性和生物降解性.

  15. Mass spectrometry study of the sublimation of aliphatic dipeptides

    Science.gov (United States)

    Badelin, V. G.; Tyunina, E. Yu.; Krasnov, A. V.; Tyunina, V. V.; Giricheva, N. I.; Girichev, A. V.

    2012-03-01

    The sublimation of glycyl-L-α-alanine (Gly-Ala), L-α-alanyl-L-α-alanine (Ala-Ala), and DL-α-alanyl-DL-α-valine (Ala-Val) aliphatic dipeptides is studied by electron ionization mass spectrometry in combination with Knudsen effusion. The temperature range in which substances sublime as monomer molecular forms is determined. Enthalpies of sublimation Δs H°( T) are determined for Gly-Ala, Ala-Ala, and Ala-Val. It is shown that the enthalpy of sublimation of dipeptides increases with an increase in the side hydrocarbon radical. The unknown Δs H°(298) values for 17 amino acids and nine dipeptides are estimated using the proposed "structure-property" correlation model, in which the geometry and electron characteristics of molecules are used as structural descriptors.

  16. Sodium hypochlorite oxidation of petroleum aliphatic contaminants in calcareous soils.

    Science.gov (United States)

    Picard, François; Chaouki, Jamal

    2016-02-01

    This research project investigated the sodium hypochlorite (NaClO) oxidation of aliphatic petroleum contaminants (C10-C50) in a calcareous soil (average 5473 ppm C10-C50, 15 wt% Ca), which had been excavated from a contaminated industrial site. The decontamination objective was to lower the C10-C50 concentration to 700 ppm. CO2 acidity was used in the project to boost the NaClO oxidation yield and seems to have played a role in desorbing the natural organic matter. The experimental conditions were a 2- to 16-h reaction time, at room temperature, with a 1 to 12.5 wt% NaClO oxidative solution and a fixed 2:1 solution-to-soil ratio. With a 3 wt% NaClO solution and with a CO2 overhead, the NaClO dosage requirement was maintained below 60 g NaClO/g of oxidized C10-C50 over the entire decontamination range. The strong chlorine smell remaining after the reaction was completed suggests that part of the NaClO requirement can be recycled. Except traces of chloroform, there were no regulation-listed organochloride contaminants detected on either the treated soil samples or leachates and the total count of chlorinated compounds in treated soil samples was below the detection limit of 250 mg/kg. The NaClO oxidation mechanism on aliphatic substrates might be triggered by transition metals, such as manganese, but no attempt has been made to investigate the oxidation mechanism. Further investigations would include a constant-fed NaClO system and other techniques to lower the required NaClO dosage. PMID:26702553

  17. Synthesis of novel lanthanide acylpyrazolonato ligands with long aliphatic chains and immobilization of the Tb complex on the surface of silica pre-modified via hydrophobic interactions.

    Science.gov (United States)

    Pettinari, C; Marchetti, F; Pettinari, R; Belousov, Y A; Taydakov, I V; Krasnobrov, V D; Petukhov, D I; Drozdov, A A

    2015-09-01

    Five new complexes Ln(Q(C17))3(H2O)(Solv) (Ln = Y, Solv = H2O, Ln = Tb, Dy, Sm or Eu, Solv = EtOH) were synthesized with the acylpyrazolonato ligand Q(C17) bearing a long aliphatic C17H35 chain in the acyl moiety, and the crystal structure of Y(Q(C17))3(H2O)2 shows the three aliphatic chains from the coordinated ligands positioned in the same direction, affording plane layers built by Y(Q(C17))3(H2O)2 molecules connected through H-bonding interactions. The layers are stitched to each other like in "hook & loop" tapes. Luminescence of complexes was determined and the complex Tb(Q(C17))3(H2O)(EtOH) was immobilized on the surface of silica preprocessed using a C17H35CONH(CH2)3Si(OEt)3 reagent via hydrophobic interactions of long aliphatic chains. Luminescent properties and micromorphology of the obtained hybrid particles and hybrid films were investigated. Intensive green emission of the complex retains after grafting onto the silica surface. Inclusion of the complex on the surface of silica materials occurs as separate molecules, after the disruption of the H-bonding network present in the crystalline phase of the pure terbium sample.

  18. 40 CFR 721.3830 - Formaldehyde, reaction products with an alkylated phenol and an aliphatic amine (generic).

    Science.gov (United States)

    2010-07-01

    ... an alkylated phenol and an aliphatic amine (generic). 721.3830 Section 721.3830 Protection of... products with an alkylated phenol and an aliphatic amine (generic). (a) Chemical substance and significant..., reaction products with an alkylated phenol and an aliphatic amine (PMN P-99-0531) is subject to...

  19. Shape memory polymers based on uniform aliphatic urethane networks

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, T S; Bearinger, J P; Herberg, J L; Marion III, J E; Wright, W J; Evans, C L; Maitland, D J

    2007-01-19

    Aliphatic urethane polymers have been synthesized and characterized, using monomers with high molecular symmetry, in order to form amorphous networks with very uniform supermolecular structures which can be used as photo-thermally actuable shape memory polymers (SMPs). The monomers used include hexamethylene diisocyanate (HDI), trimethylhexamethylenediamine (TMHDI), N,N,N{prime},N{prime}-tetrakis(hydroxypropyl)ethylenediamine (HPED), triethanolamine (TEA), and 1,3-butanediol (BD). The new polymers were characterized by solvent extraction, NMR, XPS, UV/VIS, DSC, DMTA, and tensile testing. The resulting polymers were found to be single phase amorphous networks with very high gel fraction, excellent optical clarity, and extremely sharp single glass transitions in the range of 34 to 153 C. Thermomechanical testing of these materials confirms their excellent shape memory behavior, high recovery force, and low mechanical hysteresis (especially on multiple cycles), effectively behaving as ideal elastomers above T{sub g}. We believe these materials represent a new and potentially important class of SMPs, and should be especially useful in applications such as biomedical microdevices.

  20. Electrospun aliphatic polycarbonates as tailored tissue scaffold materials.

    Science.gov (United States)

    Welle, Alexander; Kröger, Mario; Döring, Manfred; Niederer, Kerstin; Pindel, Elvira; Chronakis, Ioannis S

    2007-04-01

    Two different aliphatic polycarbonates were synthesised from CO(2) and the respective epoxides. Poly(propyl carbonate) (PPC) was prepared by heterogeneous catalysis with zinc glutarate. Poly(cyclohexyl carbonate) (PCHC) was prepared via living copolymerisation homogeneously catalysed by a 3-amino-2-cyanoimidoacrylate zinc acetate complex and subjected to electrospinning. The obtained nanofibres had a well-defined morphology free of beads along the fibres and with slightly porous structures on their surface. Subsequently, low-power deep UV irradiations, previously applied for photochemical surface modifications of two-dimensional and three-dimensional scaffolds from biostable polymers, were performed. Here, an effect on surface and bulk properties of PPC nanofibres was observed. Surface modifications of both polymers affected plasma protein adsorption. Photochemical bulk modifications observed for the first time on PPC nanofibres are indicating the possibility of spatial control of biodegradation rates, hence allow for control of the progression of host/implant interactions in vivo. In particular PPC was used for cell culture of L929 fibroblasts and primary rat hepatocytes. Even delicate primary cells showed good adhesion to the scaffolds and high viability.

  1. Project Summary. IN-SITU AQUIFER RESTORATION OF CHLORINATED ALIPHATICS BY METHANOTROPHIC BACTERIA

    Science.gov (United States)

    This project evaluated the potential of an innovative approach to aquifer restoration: enhanced in-situ biotransformation of chlorinated aliphatic solvents by a bacterial community grown on methane under aerobic conditions. The target chlorinated compounds were trichloroethene (...

  2. Fully Biobased Unsaturated Aliphatic Polyesters from Renewable Resources : Enzymatic Synthesis, Characterization, and Properties

    NARCIS (Netherlands)

    Jiang, Yi; Alberda van Ekenstein, Gerhard; Woortman, Albert J. J.; Loos, Katja

    2014-01-01

    Fully biobased saturated and unsaturated aliphatic polyesters and oligoesters are successfully prepared by Candida antarctica lipase B (CALB)-catalyzed polycondensations of succinate, itaconate, and 1,4-butanediol. The effects of monomer substrates and polymerization methods on enzymatic polycondens

  3. Thermally reversible thermoset materials based on the chemical modification of alternating aliphatic polyketones

    NARCIS (Netherlands)

    Araya Hermosilla, Rodrigo Andrés

    2016-01-01

    This thesis focused on the synthesis and characterization of different kinds of reversible thermosets and thermoset nanocomposite materials by using alternating aliphatic polyketone (PK) as raw material. Fundamental knowledge was generated regarding the molecular design of new polymers via chemical

  4. Calamistrin E, the First Annonaceous Acetogenin with Double Bond in Aliphatic Chain from Genus Uvaria

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Calamistrin E, the first Annonaceous acetogenin with C=C bond in the aliphatic chain from the genus Uvaria was isolated from U. calamistrata. Its structure including relative and absolute configurations was determined by chemical derivation and spectral analysis.

  5. Facile synthesis of aliphatic isothiocyanates and thioureas on solid phase using peptide coupling reagents

    DEFF Research Database (Denmark)

    Boas, Ulrik; Andersen, Heidi Gertz; Christensen, Jørn B.;

    2004-01-01

    Peptide coupling reagents can be used as versatile reagents for the formation of aliphatic isothiocyanates and thioureas on solid phase from the corresponding solid-phase anchored aliphatic primary amines. The formation of the thioureas is fast and highly chemoselective, and proceeds via formation...... of the intermediate isothiocyanate. The isothiocyanate and subsequent thiourea formation take place under standard peptide coupling conditions using carbon disulfide as the 'amino acid'. The thioureas are released from the resin and isolated in moderate to high yields....

  6. On the Aliphatic versus Aromatic Content of the Carriers of the "Unidentified" Infrared Emission Features

    CERN Document Server

    Yang, Xuejuan; Li, Aigen; Zhong, Jianxin

    2016-01-01

    Although it is generally accepted that the so-called "unidentified" infrared emission (UIE) features at 3.3, 6.2, 7.7, 8.6, and 11.3 micrometer are characteristic of the stretching and bending vibrations of aromatic hydrocarbon materials, the exact nature of their carriers remains unknown: whether they are free-flying, predominantly aromatic gas-phase molecules, or amorphous solids with a mixed aromatic/aliphatic composition are being debated. Recently, the 3.3 and 3.4 micrometer features which are commonly respectively attributed to aromatic and aliphatic C-H stretches have been used to place an upper limit of ~2\\% on the aliphatic fraction of the UIE carriers (i.e. the number of C atoms in aliphatic chains to that in aromatic rings). Here we further explore the aliphatic versus aromatic content of the UIE carriers by examining the ratio of the observed intensity of the 6.2 micrometer aromatic C-C feature (I6.2) to that of the 6.85 micrometer aliphatic C-H deformation feature (I6.85). To derive the intrinsic...

  7. Synthesis of novel naphthoquinone aliphatic amides and esters and their anticancer evaluation.

    Science.gov (United States)

    Kongkathip, Boonsong; Akkarasamiyo, Sunisa; Hasitapan, Komkrit; Sittikul, Pichamon; Boonyalai, Nonlawat; Kongkathip, Ngampong

    2013-02-01

    Fourteen new naphthoquinone aliphatic amides and seventeen naphthoquinone aliphatic esters were synthesized in nine to ten steps from 1-hydroxy-2-naphthoic acid with 9-25% overall yield for the amides, and 16-21% overall yield for the esters. The key step of the amide synthesis is a coupling reaction between amine and various aliphatic acids using 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM) as a coupling agent while for the ester synthesis, DCC/DMAP or CDI was used as the coupling reagent between aliphatic acids and naphthoquinone alcohol. Both naphthoquinone amides and esters were evaluated for their anticancer activity against KB cells. It was found that naphthoquinone aliphatic amides showed stronger anticancer activity than those of the esters when the chains are longer than 7-carbon atoms. The optimum chain of amides is expected to be 16-carbon atoms. In addition, naphthoquinone aliphatic esters with α-methyl on the ester moiety possessed much stronger anticancer activity than the straight chains. Decatenation assay revealed that naphthoquinone amide with 16-carbon atoms chain at 15 μM and 20 μM can completely inhibit hTopoIIα activity while at 10 μM the enzyme activity was moderately inhibited. Molecular docking result also showed the same trend as the cytotoxicity and decatenation assay. PMID:23313636

  8. Sources and distribution of aliphatic and polyaromatic hydrocarbons in sediments from the Neuquen River, Argentine Patagonia.

    Science.gov (United States)

    Monza, Liliana B; Loewy, Ruth M; Savini, Mónica C; Pechen de d'Angelo, Ana M

    2013-01-01

    Spatial distribution and probable sources of aliphatic and polyaromatic hydrocarbons (AHs, PAHs) were investigated in surface sediments collected along the bank of the Neuquen River, Argentina. Total concentrations of aliphatic hydrocarbons ranged between 0.41 and 125 μg/g dw. Six stations presented low values of resolved aliphatic hydrocarbons and the n-alkane distribution indexes applied suggested a clear biogenic source. These values can be considered the baseline levels of aliphatic hydrocarbons for the river sediments. This constitutes important information for the assessment of future impacts since a strong impulse in the exploitation of shale gas and shale oil in these zones is nowadays undergoing. For the other 11 stations, a mixture of aliphatic hydrocarbons of petrogenic and biogenic origin was observed. The spatial distribution reflects local inputs of these pollutants with a significant increase in concentrations in the lower course, where two major cities are located. The highest values of total aliphatic hydrocarbons were found in this sector which, in turn, was the only one where individual PAHs were detected.

  9. Aliphatic polyester block polymers: renewable, degradable, and sustainable.

    Science.gov (United States)

    Hillmyer, Marc A; Tolman, William B

    2014-08-19

    Nearly all polymers are derived from nonrenewable fossil resources, and their disposal at their end of use presents significant environmental problems. Nonetheless, polymers are ubiquitous, key components in myriad technologies and are simply indispensible for modern society. An important overarching goal in contemporary polymer research is to develop sustainable alternatives to "petro-polymers" that have competitive performance properties and price, are derived from renewable resources, and may be easily and safely recycled or degraded. Aliphatic polyesters are particularly attractive targets that may be prepared in highly controlled fashion by ring-opening polymerization of bioderived lactones. However, property profiles of polyesters derived from single monomers (homopolymers) can limit their applications, thus demanding alternative strategies. One such strategy is to link distinct polymeric segments in an A-B-A fashion, with A and B chosen to be thermodynamically incompatible so that they can self-organize on a nanometer-length scale and adopt morphologies that endow them with tunable properties. For example, such triblock copolymers can be useful as thermoplastic elastomers, in pressure sensitive adhesive formulations, and as toughening modifiers. Inspired by the tremendous utility of petroleum-derived styrenic triblock copolymers, we aimed to develop syntheses and understand the structure-property profiles of sustainable alternatives, focusing on all renewable and all readily degradable aliphatic polyester triblocks as targets. Building upon oxidation chemistry reported more than a century ago, a constituent of the peppermint plant, (-)-menthol, was converted to the ε-caprolactone derivative menthide. Using a diol initiator and controlled catalysis, menthide was polymerized to yield a low glass transition temperature telechelic polymer (PM) that was then further functionalized using the biomass-derived monomer lactide (LA) to yield fully renewable PLA

  10. Pharmacological activities of cilantro's aliphatic aldehydes against Leishmania donovani.

    Science.gov (United States)

    Donega, Mateus A; Mello, Simone C; Moraes, Rita M; Jain, Surendra K; Tekwani, Babu L; Cantrell, Charles L

    2014-12-01

    Leishmaniasis is a chronic infectious disease caused by different Leishmania species. Global occurrences of this disease are primarily limited to tropical and subtropical regions. Treatments are available; however, patients complain of side effects. Different species of plants have been screened as a potential source of new drugs against leishmaniasis. In this study, we investigated the antileishmanial activity of cilantro (Coriandrum sativum) essential oil and its main components: (E)-2-undecenal, (E)-2-decenal, (E)-2-dodecenal, decanal, dodecanal, and tetradecanal. The essential oil of C. sativum leaves inhibits growth of Leishmani donovani promastigotes in culture with an IC50 of 26.58 ± 6.11 µg/mL. The aliphatic aldehydes (E)-2-decenal (7.85 ± 0.28 µg/mL), (E)-2-undecenal (2.81 ± 0.21 µg/mL), and (E)-2-dodecenal (4.35 ± 0.15 µg/mL), all isolated from C. sativum essential oil, are effective inhibitors of in vitro cultures of L. donovani promastigotes. Aldehydes (E)-2-decenal, (E)-2-undecenal, and (E)-2-dodecenal were also evaluated against axenic amastigotes and IC50 values were determined to be 2.47 ± 0.25 µg/mL, 1.25 ± 0.11 µg/mL, and 4.78 ± 1.12 µg/mL, respectively. (E)-2-Undecenal and (E)-2-dodecenal demonstrated IC50 values of 5.65 ± 0.19 µg/mL and 9.60 ± 0.89 µg/mL, respectively, against macrophage amastigotes. These cilantro compounds showed no cytotoxicity against THP-1 macrophages. PMID:25340465

  11. Interaction of gaseous aromatic and aliphatic compounds in thermophilic biofilters.

    Science.gov (United States)

    Hu, Qing-yuan; Wang, Can

    2015-12-30

    Two thermophilic biofilters were applied in treating a mixture of gaseous aromatic (benzene) and aliphatic compounds (hexane) to evaluate the interaction of the compounds. The performance of the biofilters was investigated in terms of removal efficiencies, elimination capacity, kinetic analysis, interaction indices, and microbial metabolic characteristics. Results showed that the removal performance of benzene was unaffected by the addition of hexane. The removal efficiencies of benzene were maintained at approximately 80% and the biodegradation rate constant was maintained at 120 h(-1). However, the removal efficiencies of hexane decreased significantly from 60% to 20% and the biodegradation rate constant exhibited a distinct decrease from 93.59 h(-1) to 56.32 h(-1). The interaction index of benzene with the addition of hexane was -0.029, which indicated that hexane had little effect on the degradation of benzene. By contrast, the interaction index of hexane by benzene was -0.557, which showed that benzene inhibited the degradation of hexane significantly. Similar conclusions were obtained about the substrate utilization. Moreover, the utilization degree of carbon sources and the microbial metabolic activities in the biofilter treating hexane were significantly improved with the addition of benzene, whereas the addition of hexane had a slight effect on the microbial communities in the biofilter treating benzene. Conclusions could be obtained that when mixtures of benzene and hexane were treated using biofilters, the degradation of benzene, which was more easily degradable, was dominant and unaffected; whereas the degradation of hexane, which was less easily degradable, was inhibited because of the changing of microbes.

  12. Secondary aerosol formation from atmospheric reactions of aliphatic amines

    Directory of Open Access Journals (Sweden)

    S. M. Murphy

    2007-01-01

    Full Text Available Although aliphatic amines have been detected in both urban and rural atmospheric aerosols, little is known about the chemistry leading to particle formation or the potential aerosol yields from reactions of gas-phase amines. We present here the first systematic study of aerosol formation from the atmospheric reactions of amines. Based on laboratory chamber experiments and theoretical calculations, we evaluate aerosol formation from reaction of OH, ozone, and nitric acid with trimethylamine, methylamine, triethylamine, diethylamine, ethylamine, and ethanolamine. Entropies of formation for alkylammonium nitrate salts are estimated by molecular dynamics calculations enabling us to estimate equilibrium constants for the reactions of amines with nitric acid. Though subject to significant uncertainty, the calculated dissociation equilibrium constant for diethylammonium nitrate is found to be sufficiently small to allow for its atmospheric formation, even in the presence of ammonia which competes for available nitric acid. Experimental chamber studies indicate that the dissociation equilibrium constant for triethylammonium nitrate is of the same order of magnitude as that for ammonium nitrate. All amines studied form aerosol when photooxidized in the presence of NOx with the majority of the aerosol mass present at the peak of aerosol growth consisting of aminium (R3NH+ nitrate salts, which repartition back to the gas phase as the parent amine is consumed. Only the two tertiary amines studied, trimethylamine and triethylamine, are found to form significant non-salt organic aerosol when oxidized by OH or ozone; calculated organic mass yields for the experiments conducted are similar for ozonolysis (15% and 5% respectively and photooxidation (23% and 8% respectively. The non-salt organic aerosol formed appears to be more stable than the nitrate salts and does not quickly repartition back to the gas phase.

  13. Synthesis of protons exchange polymeric membranes via co-poly-esters doped with sodium dodecyl sulfate for application in PEM fuel cells; Sintese de membranas polimericas condutoras de protons por imobilizacao de MDs em copoliesteres para aplicacao em PEM-FC

    Energy Technology Data Exchange (ETDEWEB)

    Fiuza, R.A.; Brioude, M.M.; Bresciani, D.; Jose, N.M.; Boaventura, J.S. [Universidade Federal da Bahia (IQ/UFBA), Salvador, BA (Brazil). Inst. de Quimica

    2008-07-01

    Polymers are largely studied for use in PEM-type fuel cell (Proton Exchange membrane, PEMFC). These fuel cells are based on polymer membranes as electrolyte, also called protons conductor. This work developed co-polyesters made electrical conductors by doping with sodium dodecyl sulfate. The copolymers were synthesized from the copolymerization of terephthalic and adipic acids with glycerol. The material was processed in a reactor and shaped by hot pressing, yielding homogeneous and flexible plates, with excellent surface finish. The co-polyesters were analyzed by SEM, FTIR, TG, DSC, and XRD. The thermal analysis showed that the composites were thermally stable up to about 250 deg C. The micrographics revealed the MDS homogeneously dispersed in the polymeric matrix. These copolymers showed electrical conductivity between 10-7 to 10-1 S/cm, suggesting strong potential use in PEM fuel cells. (author)

  14. CZE study on adsorption processes of aliphatic and aromatic amines on PMMA chip.

    Science.gov (United States)

    Masár, Marián; Kruk, Pavol; Luc, Milan; Bodor, Róbert; Danč, Ladislav; Troška, Peter

    2013-02-01

    Adsorption processes on a PMMA chip linked with CZE separations of a group of 13 aliphatic and aromatic mono- and di-amines were studied. Due to the lack of chromophores within aliphatic amines, contact conductivity detection implemented directly onto the chip was used for monitoring of cationic CZE separations. To prevent an adsorption of studied amines to the chip channels, the surface of PMMA chip was modified by dynamic coating. Different surface modifiers, such as aliphatic oligoamines (diethylenetriamine and triethylenetetramine), were added to the BGE solutions filling the chip channels. The effect of various concentrations of surface modifiers on peak profiles and separation parameters of amines was monitored. Of these, mainly, aliphatic di-amines and aromatic mono-amines adversely affected the CZE resolution of a whole group of analytes by their strong adsorption to the chip channels. A propionate BGE with pH 3.2 containing 100 μM triethylenetetramine and 25 mM 18-crown-6-ether was found suitable for CZE resolution of 12 from a total of 13 amines studied. Simple dynamic modification of the surface of PMMA chip enabled fast (analysis time lasted 9 min), sensitive (sub-μM LODs reached) and reproducible (1-3% RSD of the peak areas) CZE analysis of the aliphatic and aromatic amines.

  15. ORGANIC CHEMISTRY. Catalytic asymmetric hydroamination of unactivated internal olefins to aliphatic amines.

    Science.gov (United States)

    Yang, Yang; Shi, Shi-Liang; Niu, Dawen; Liu, Peng; Buchwald, Stephen L

    2015-07-01

    Catalytic assembly of enantiopure aliphatic amines from abundant and readily available precursors has long been recognized as a paramount challenge in synthetic chemistry. Here, we describe a mild and general copper-catalyzed hydroamination that effectively converts unactivated internal olefins—an important yet unexploited class of abundant feedstock chemicals—into highly enantioenriched α-branched amines (≥96% enantiomeric excess) featuring two minimally differentiated aliphatic substituents. This method provides a powerful means to access a broad range of advanced, highly functionalized enantioenriched amines of interest in pharmaceutical research and other areas.

  16. On the aliphatic versus aromatic content of the carriers of the `unidentified' infrared emission features

    Science.gov (United States)

    Yang, X. J.; Glaser, R.; Li, Aigen; Zhong, J. X.

    2016-10-01

    Although it is generally accepted that the unidentified infrared emission (UIE) features at 3.3, 6.2, 7.7, 8.6, and 11.3 μm are characteristic of the stretching and bending vibrations of aromatic hydrocarbon materials, the exact nature of their carriers remains unknown: whether they are free-flying, predominantly aromatic gas-phase molecules, or amorphous solids with a mixed aromatic/aliphatic composition are being debated. Recently, the 3.3 and 3.4 μm features which are commonly respectively attributed to aromatic and aliphatic C-H stretches have been used to place an upper limit of ˜2 per cent on the aliphatic fraction of the UIE carriers (i.e. the number of C atoms in aliphatic chains to that in aromatic rings). Here we further explore the aliphatic versus aromatic content of the UIE carriers by examining the ratio of the observed intensity of the 6.2 μm aromatic C-C feature (I6.2) to that of the 6.85 μm aliphatic C-H deformation feature (I6.85). To derive the intrinsic oscillator strengths of the 6.2 μm stretch (A6.2) and the 6.85 μm deformation (A6.85), we employ density functional theory to compute the vibrational spectra of seven methylated polycyclic aromatic hydrocarbon molecules and their cations. By comparing I6.85/I6.2 with A6.85/A6.2, we derive the fraction of C atoms in methyl(ene) aliphatic form to be at most ˜10 per cent, confirming the earlier finding that the UIE emitters are predominantly aromatic. We have also computed the intrinsic strength of the 7.25 μm feature (A7.25), another aliphatic C-H deformation band. We find that A6.85 appreciably exceeds A7.25. This explains why the 6.85 μm feature is more frequently detected in space than the 7.25 μm feature.

  17. Aliphatic and aromatic hydrocarbons in Candiota coal samples: novel series of bicyclic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, A.C.M.L.; Loureiro, M.R.B.; Cardoso, J.N. [Universidade Federal do Rio de Janeiro, Rio de Janeiro (Brazil). Inst. de Quimica

    1999-07-01

    Gas chromatography - mass spectrometry was used to analyse aliphatic and aromatic fractions obtained from nine samples taken from two different seams of five boreholes in the Candiota coalfield (Lower Permian). The occurrence of certain tetracyclic diterpenoids among the aliphatic hydrocarbons, and the tricyclic diterpenoids simonellite and retene in the aromatic hydrocarbon concentrates, suggest an important input from conifers to the sedimentary biomass. This may explain the origin of a novel series of saturated and aromatic bicyclic compounds detected in the extracts which may be structurally related to the same precursor, possibly a conifer resin-derived tricyclic diterpenoid.

  18. 热致液晶PET-PHB共聚酯增韧改性环氧树脂%Toughening Epoxy Resins by Liquid Crystalline Co-Polyester PET-PHB

    Institute of Scientific and Technical Information of China (English)

    曹有名; 石胜伟; 孙军; 于德梅

    2001-01-01

    The toughness of the epoxy resins is modified by liquid crystalline copolyester PET-PHB.The morphologies of the fracture surface were observed by scanning electron microscope (SEM).The relationships between the morphologies and mechanical properties were discussed. The results revealed that the moduli, tensile and impact strengths of the modified epoxy resins are much higher than those of the unmodified epoxy resin. The maximum values have been reached in the tensile and impact strength of the modified epoxy resins by adding PET-PHB copolyester of 10%.At the same time,an uniformly network microstructure emerged on the fracture surface of the toughened epoxy resins, which is obviously different from that of the unmodified epoxy resin. It is believed that the formation of the uniformly network microstructure resulted in the significant improvement of impact and tensile strength of the epoxy resins.%采用熔融共混方法,用热致液晶PET-PHB共聚酯对环氧树脂进行增韧改性,并研究了共混体系的力学性能.借助扫描电镜,对材料断裂面的形态结构进行了分析,探讨了体系的形态结构与冲击性能之间的关系.研究结果表明,改性材料的弹性模量高于纯环氧树脂,其冲击强度及拉伸强度均有大幅度提高.当PET-PHB共聚酯的加入量为10%时,环氧改性材料的拉伸强度及冲击强度均为最大值.此时,改性材料的断面形态呈微观网络分布,明显不同于未改性环氧树脂脆性断裂的台阶型结构.

  19. 40 CFR 721.10190 - Formaldehyde, polymer with aliphatic diamine and phenol, reaction products with 4-methyl-2...

    Science.gov (United States)

    2010-07-01

    ... diamine and phenol, reaction products with 4-methyl-2-pentanone (generic). 721.10190 Section 721.10190... Formaldehyde, polymer with aliphatic diamine and phenol, reaction products with 4-methyl-2-pentanone (generic... identified generically as formaldehyde, polymer with aliphatic diamine and phenol, reaction products with...

  20. Swift heavy ion induced modification of aliphatic polymers

    Energy Technology Data Exchange (ETDEWEB)

    Hossain, Umme Habiba

    2015-01-15

    In this thesis, the high energy heavy ion induced modification of aliphatic polymers is studied. Two polymer groups, namely polyvinyl polymers (PVF, PVAc, PVA and PMMA) and fluoropolymers (PVDF, ETFE, PFA and FEP) were used in this work. Polyvinyl polymers were investigated since they will be used as insulating materials in the superconducting magnets of the new ion accelerators of the planned International Facility for Antiproton and Ion Research (FAIR) at the GSI Helmholtz-Centre of Heavy Ion Research (GSI) in Darmstadt. In order to study ion-beam induced degradation, all polymer foils were irradiated at the GSI linear accelerator UNILAC using several projectiles (U, Au, Sm, Xe) and experimentation sites (beam lines X0 and M3) over a large fluence regime (1 x 10{sup 10} - 5 x 10{sup 12} ions/cm{sup 2}). Five independent techniques, namely infrared (FT-IR) and ultraviolet-visible (UV-Vis) spectroscopy, residual gas analysis (RGA), thermal gravimetric analysis (TGA), and mass loss analysis (ML), were used to analyze the irradiated samples. FT-IR spectroscopy revealed that ion irradiation led to the decrease of characteristic band intensities showing the general degradation of the polymers, with scission of side groups and the main backbone. As a consequence of the structural modification, new bands appeared. UV-Vis transmission analysis showed an absorption edge shift from the ultraviolet region towards the visible region indicating double bond and conjugated double bond formation. On-line massspectrometric residual gas analysis showed the release of small gaseous fragment molecules. TGA analysis gave evidence of a changed thermal stability. With ML analysis, the considerable mass loss was quantified. The results of the five complementary analytical methods show how heavy ion irradiation changes the molecular structure of the polymers. Molecular degradation mechanisms are postulated. The amount of radiation damage is found to be sensitive to the used type of ionic

  1. Lipase-catalyzed synthesis of oligoesters of 2,5-furandicarboxylic acid with aliphatic diols

    NARCIS (Netherlands)

    Cruz-Izquierdo, Álvaro; Broek, van den Lambertus A.M.; Serra, Juan L.; Llama, María J.; Boeriu, Carmen G.

    2015-01-01

    2,5-Furandicarboxylic acid is a platform chemical for the production of biobased polymers and materials. This study reports the synthesis of furan oligoesters via polytransesterification of dimethyl furan-2,5-dicarboxylate and linear α, ω-aliphatic diols with chain length ranging from C2 to C12,

  2. High-resolution gas chromatographic analysis of polycyclic aromatic hydrocarbons and aliphatic hydrocarbons

    International Nuclear Information System (INIS)

    A study of the analysis by gas chromatography of aromatic polycyclic hydrocarbons and aliphatic hydrocarbons is presented. The separation has been carried out by glass and fused silica capillary column in two different polar stationary phases OV-1 and SE-54. The limitation and the advantages of the procedure are discussed in terms of separation, sensitivity and precision. (Author) 20 refs

  3. IN-SITU AQUIFER RESTORATION OF CHLORINATED ALIPHATICS BY METHANOTROPHIC BACTERIA

    Science.gov (United States)

    This project evaluated the potential of enhanced in-situ biotransformation of chlorinated aliphatic solvents by a bacterial community grown on methane under aerobic conditions. The target chlorinated compounds were trichloroethene (TCE), cis-and trans-1,2-dichloroethene (DCE), an...

  4. Selection of ionic liquids for the extraction of aromatic hydrocarbons from aromatic/aliphatic mixtures

    NARCIS (Netherlands)

    Meindersma, G. Wytze; Podt, Anita (J.G.); Haan, de André B.

    2005-01-01

    The separation of aromatic hydrocarbons (benzene, toluene, ethyl benzene and xylenes) from C4 to C10 aliphatic hydrocarbon mixtures is challenging since these hydrocarbons have boiling points in a close range and several combinations form azeotropes. In this work, we investigated the separation of t

  5. PATTERN RECOGNITION ANALYSIS OF A SET OF MUTAGENIC ALIPHATIC N-NITROSAMINES

    Science.gov (United States)

    A set of 21 mutagenic aliphatic N-nitrosamines were subjected to a pattern recognition analysis using ADAPT software. Four descriptors based on molecular connectivity, geometry and sigma charge on nitrogen were capable of achieving a 100% classification using the linear learning ...

  6. Recovery of Aliphatic Hydrocarbons from Oil Field Sludge using Bacillus sp

    Directory of Open Access Journals (Sweden)

    Rizwan Ahmed Bhutto

    2015-04-01

    Full Text Available Bioremediation of aliphatic HC (Hydrocarbons in the oily sludge of Kunnar oil and gas field, Pakistan was attempted by means of previously isolated and developed Bacillus sp. Both autoclaved and non-autoclaved sludge samples were analyzed for a reaction time of 30 days with pH 7 and temperature of 380C in 50 ml MSM growth media for the sludge concentration of 5, 10 and 50% with 2, 4 and 6ml of Bacillus sp. relatively, in air atmosphere. Stabilization of the samples by microbial activity resulted in the decrease in TPH (Total Petroleum Hydrocarbon concentration by 60, 69 and 87% in autoclaved samples in contrast to the decrease of 70, 84 and 94% observed in non-autoclaved samples, relatively. Hydrocarbon degradation in oily sludge was investigated via GC which transpired that 97 and 99% concentration of aliphatic hydrocarbons in autoclaved and non-autoclaved samples was removed at 5% of TPH concentration, relatively. However, with 10% TPH concentration aliphatic hydrocarbons reduction was 68% in autoclaved samples to that of 87% in non-autoclaved samples. Further increase in the hydrocarbons concentration by 50% yielded in the removal of aliphatic hydrocarbons by 65% in autoclaved samples as compared to 98% decrease in non-autoclaved samples.

  7. Phenolic and short-chained aliphatic organic acid constituents of wild oat (Avena fatua L.) seeds.

    Science.gov (United States)

    Gallagher, R S; Ananth, R; Granger, K; Bradley, B; Anderson, J V; Fuerst, E P

    2010-01-13

    The objective of this research was to identify and quantify the phenolic and short-chained aliphatic organic acids present in the seeds of three wild-type populations of wild oat and compare these results to the chemical composition of seeds from two commonly utilized wild oat isolines (M73 and SH430). Phenolic acids have been shown to serve as germination inhibitors, as well as protection for seeds from biotic and abiotic stress factors in other species, whereas aliphatic organic acids have been linked to germination traits and protection against pathogens. Wild oat populations were grown under a "common garden" environment to remove maternal variation, and the resulting seeds were extracted to remove the readily soluble and chemically bound phenolic and aliphatic organic acid components. Compounds were identified and quantified using gas chromatography-mass spectrometry. Ferulic and p-coumaric acid comprised 99% of the total phenolic acids present in the seeds, of which 91% were contained in the hulls and 98% were in the chemically bound forms. Smaller quantities of OH benzoic and vanillic acid were also detected. Soluble organic acids concentrations were higher in the M73 isoline compared to SH430, suggesting that these chemical constituents could be related to seed dormancy. Malic, succinic, fumaric and azelaic acid were the dominant aliphatic organic acids detected in all seed and chemical fractions.

  8. Synthesis and characterization of biodegradable aliphatic polyesters using dibutylmagnesium as initiator

    Institute of Scientific and Technical Information of China (English)

    Lian Liu; Zhi Yong Wei; Min Qi

    2007-01-01

    Aliphatic polyesters were synthesized via the ring opening polymerization of the corresponding lactones initiated with dibutylmagnesium both in bulk and in solution.The resulting polymers were characterized by 1H, 13C NMR, GPC and XRD.The results indicated that dibutylmagnesium is an effective initiator for the ring opening polymerization of lactones.

  9. Enthalpy of cooperative hydrogen bonding in complexes of tertiary amines with aliphatic alcohols: Calorimetric study

    International Nuclear Information System (INIS)

    Research highlights: → Solution enthalpies of aliphatic alcohols in tertiary amines and vice versa were measured. → The enthalpies of specific interaction of amines in aliphatic alcohols are lower than the enthalpies of hydrogen bonding in 1:1 complexes amine-alcohol determined in base media. → Hydrogen bond cooperativity factors in multi-particle complexes of alcohols with aromatic amines are approximately equal for all alcohols. → Hydrogen bond cooperativity factors in multi-particle complexes of alcohols with trialkylamines decrease with increasing of alkyl radical length in alcohol and amine molecules. - Abstract: The work is devoted to the investigation of thermodynamics of specific interaction of the tertiary aliphatic and aromatic amines with associated solvents as which aliphatic alcohols were taken. Solution enthalpies of aliphatic alcohols in amines (tri-n-propylamine, 2-methylpyridine, 3-methylpyridine, N-methylimidazole) as well as amines in alcohols were measured at infinite dilution. The enthalpies of specific interaction (H-bonding) in systems studied were determined based on experimental data. The enthalpies of specific interaction of amines in aliphatic alcohols significantly lower than the enthalpies of hydrogen bonding in complexes amine-alcohol of 1:1 composition determined in base media due to the reorganization of aliphatic alcohols as solvents. The determination of solvent reorganization contribution makes possible to define the hydrogen bonding enthalpies of amines with clusters of alcohols. Obtained enthalpies of hydrogen bonding in multi-particle complexes are sensitive to the influence of cooperative effect. It was shown, that hydrogen bond cooperativity factors in multi-particle complexes of alcohols with amines are approximately equal for all alcohols when pyridines and N-methylimidazole as solutes are used. At the same time, H-bonding cooperativity factors in complexes of trialkylamines with associative species of alcohols

  10. Thin Films Formed from Conjugated Polymers with Ionic, Water-Soluble Backbones

    NARCIS (Netherlands)

    Voortman, Thomas P; Chiechi, Ryan C

    2015-01-01

    This paper compares the morphologies of films of conjugated polymers in which the backbone (main chain) and pendant groups are varied between ionic/hydrophilic and aliphatic/hydrophobic. We observe that conjugated polymers in which the pendant groups and backbone are matched, either ionic-ionic or h

  11. Self-assembly of short peptides composed of only aliphatic amino acids and a combination of aromatic and aliphatic amino acids.

    Science.gov (United States)

    Subbalakshmi, Chilukuri; Manorama, Sunkara V; Nagaraj, Ramakrishnan

    2012-05-01

    The morphology of structures formed by the self-assembly of short N-terminal t-butyloxycarbonyl (Boc) and C-terminal methyl ester (OMe) protected and Boc-deprotected hydrophobic peptide esters was investigated. We have observed that Boc-protected peptide esters composed of either only aliphatic hydrophobic amino acids or aliphatic hydrophobic amino acids in combination with aromatic amino acids, formed highly organized structures, when dried from methanol solutions. Transmission and scanning electron microscopic images of the peptides Boc-Ile-Ile-OMe, Boc-Phe-Phe-Phe-Ile-Ile-OMe and Boc-Trp-Ile-Ile-OMe showed nanotubular structures. Removal of the Boc group resulted in disruption of the ability to form tubular structures though spherical aggregates were formed. Both Boc-Leu-Ile-Ile-OMe and H-Leu-Ile-Ile-OMe formed only spherical nanostructures. Dynamic light scattering studies showed that aggregates of varying dimensions were present in solution suggesting that self-assembly into ordered structures is facilitated by aggregation in solution. Fourier transform infrared spectroscopy and circular dichroism spectroscopy data show that although all four of the protected peptides adopt well-defined tertiary structures, upon removal of the Boc group, only H-Phe-Phe-Phe-Ile-Ile-OMe had the ability to adopt β-structure. Our results indicate that hydrophobic interaction is a very important determinant for self-assembly and presence of charged and aromatic amino acids in a peptide is not necessary for self-assembly. PMID:22431418

  12. A study of aliphatic amino acids using simulated vibrational circular dichroism and Raman optical activity spectra

    CERN Document Server

    Ganesan, Aravindhan; Wang, Feng

    2013-01-01

    Vibrational optical activity (VOA) spectra, such as vibrational circular dichroism (VCD) and Raman optical activity (ROA) spectra, of aliphatic amino acids are simulated using density functional theory (DFT) methods in both gas phase (neutral form) and solution (zwitterionic form), together with their respective infrared (IR) and Raman spectra of the amino acids. The DFT models, which are validated by excellent agreements with the available experimental Raman and ROA spectra of alanine in solution, are employed to study other aliphatic amino acids. The inferred (IR) intensive region (below 2000 cm-1) reveals the signature of alkyl side chains, whereas the Raman intensive region (above 3000 cm-1) contains the information of the functional groups in the amino acids. Furthermore, the chiral carbons of the amino acids (except for glycine) dominate the VCD and ROA spectra in the gas phase, but the methyl group vibrations produce stronger VCD and ROA signals in solution. The C-H related asymmetric vibrations domina...

  13. Aliphatic C-H---Anion Hydrogen Bonds: Weak Contacts or Strong Interactions?

    Energy Technology Data Exchange (ETDEWEB)

    Hay, Benjamin [ORNL; Pedzisa, Lee [ORNL

    2009-01-01

    Electronic structure calculations, MP2/aug-cc-pVDZ, are used to determine C H---Cl hydrogen bond energies for a series of XCH3 donor groups in which the electron-withdrawing ability of X is varied over a wide range of values. When attached to polarizing substituents, aliphatic CH groups are moderate to strong hydrogen bond donors, exhibiting interaction energies comparable to those obtained with O H and N H groups. The results explain why aliphatic C H donors are observed to function as competitive binding sites in solution and suggest that such C H---anion contacts should be considered as possible contributors when evaluating the denticity of an anion receptor.

  14. Determination of aliphatic organic acids by high-performance liquid chromatography with pulsed electrochemical detection.

    Science.gov (United States)

    Casella, Innocenzo G; Gatta, Maria

    2002-01-01

    A new ion exclusion HPLC procedure accomplished with a pulsed electrochemical detection for the determination of several common aliphatic acids is described. A triple-step waveform of the applied potentials, based on the formation/inhibition of PtOH species on the electrode surface, is successfully used for sensitive detection of several aliphatic acids in flowing systems avoiding pre- or postcolumn derivatization and/or cleanup procedures. Under optimal chromatographic conditions (i.e., 50 mM HClO(4)) the proposed method allowed detection limits between 0.5 and 7 microM for all investigated acids, and the dynamic linear range spanned generally over 1 or 2 orders of magnitude. Determination of citric, malic, tartaric, lactic, formic, and acetic acids in several foods and beverages was performed, in approximately 15 min, without the necessity of any sample pretreatment. PMID:11754537

  15. Study on Aromatization of C6 Aliphatic Hydrocarbons on ZRP Zeolite Catalyst

    Institute of Scientific and Technical Information of China (English)

    Wang Yongjun; Xie Chaogang

    2004-01-01

    The performance of ZRP zeolite catalysts for aromatization of C6 aliphatic hydrocarbons was investigated in a pulsed microreactor. The influence of metal modified ZRP zeolites on aromatization reaction was also studied, coupled with comparison of aromatization tendencies of olefins, paraffins and paraffins with different degrees of chain branching. Test results had shown that the lower the silicon/aluminum ratio in the ZRP zeolite, the higher the aromatization reactivity of aliphatic hydrocarbons. Modification of ZRP zeolite by zinc and its zinc content had apparent impact on the yield and distribution of aromatics. The aromatization tendency of olefins was apparently better than paraffins, while the aromatization tendency of monomethyl paraffins was better than that of straight-chain paraffins with the exception of dimethyl paraffins, which had worse aromatization tendency because of their steric hindrance.

  16. Development and Characterization of Novel Interpenetrating Network (IPN) Foams from Epoxy Ester and Aliphatic Epoxy Resin

    OpenAIRE

    Patel, Kanuprasad; Desai, Dhirubhai; Bhuva, Santosh

    2009-01-01

    Diglycidyl ether of bisphenol-A (DGEBA) was reacted with acrylate monomer at variable molar ratios. The reaction between glycerine and epichlorohydrine form glycidyl ether of polyol aliphatic epoxy resin. The resultant resins were characterized duly. Both the resins were mixed at different ratios with constant high shear stirring. The obtained mixture and suitable additives were heated at 150oC for one and half hour. The so called Interpenetrating Network (IPN) transformed into foams. The per...

  17. Hydrogenation of Aliphatic Alkenes in a High-Temperature High-Pressure Packed-Bed Microreactor

    OpenAIRE

    Stavárek, Petr

    2012-01-01

    This contribution presents results of the characterization of a new high-temperature high-pressure integrated packed-bed microreactor (MCTU 600 from Ehrfeld Mikrotechnik BTS GmbH) for lab-scale catalyst testing. As the model reaction we used the hydrogenation of C4-C5 aliphatic alkenes heterogeneously catalyzed by Pt/Al2O3 or Pd/Al2O3.

  18. Pattern recognition analysis of a set of mutagenic aliphatic N-nitrosamines.

    OpenAIRE

    Nesnow, S; Langenbach, R; Mass, M J

    1985-01-01

    A set of 21 mutagenic aliphatic N-nitrosamines were subjected to a pattern recognition analysis using ADAPT software. Four descriptors based on molecular connectivity, geometry and sigma charge on nitrogen were capable of achieving a 100% classification using the linear learning machine or iterative least squares algorithms. Three descriptors were capable of a 90.5% and two descriptors of a 85.7% overall correct classification. Three of the four descriptors were each capable of classifying 15...

  19. Production of aliphatic carboxylic acids during the alkali catalysed decomposition of cellulose

    OpenAIRE

    Efhil, Mohamed

    2013-01-01

    The degradation of cellulosic materials under alkaline condition (sodium hydroxide) using High performance ion exclusion chromatography (HPIEC) Dionex ICS‐3000 to analyse the samples at different temperatures (at room, at 50 °C, at 90 °C), under atmosphere of N2 during 188 hours, by using acrylic acid as internal standard, resulted in complex mixture of compounds, including isosaccharinic acid. The retention time of aliphatic organic acids measured under the conditions outlined i...

  20. A QSPR STUDY OF NORMAL BOILING POINT OF ORGANIC COMPOUNDS (ALIPHATIC ALKANES) USING MOLECULAR DESCRIPTORS

    OpenAIRE

    B. Souyei; M. Korichi

    2013-01-01

    A quantitative structure–property relationship (QSPR) study is carried out to develop correlations that relate the molecular structures of organic compounds (Aliphatic Alkanes) to their normal boiling point (NBP) and two correlations were proposed for constitutionals and connectivity indices Models. The correlations are simple in application with good accuracy, which provide an easy, direct and relatively accurate way to calculate NBP. Such calculation gives us a model that gives results in r...

  1. Synthesis and reactivity of aliphatic sulfur pentafluorides from substituted (pentafluorosulfanyl)benzenes

    OpenAIRE

    Vida, Norbert; Václavík, Jiří; Beier, Petr

    2016-01-01

    Oxidation of 3- and 4-pentafluorosulfanyl-substituted anisoles and phenols with hydrogen peroxide and sulfuric acid provided a mixture of SF5-substituted muconolactone, maleic, and succinic acids. A plausible mechanism for the formation of the aliphatic SF5 compounds was presented and their chemical reactivity was investigated. SF5-substituted para-benzoquinone was synthesized; its oxidation led to an improved yield of 2-(pentafluorosulfanyl)maleic acid. The reaction of SF5-substituted maleic...

  2. Modification of nano-sized layered double hydroxides by long-chain organic aliphatic surfactants

    OpenAIRE

    RAMASAMY ANBARASAN; SEUNG SOON IM; WANDUC LEE

    2008-01-01

    The inter-layer anion of layered double hydroxides (LDH) with a hydrotalcite (HT)-like structure was ion-exchanged with various organic surfactants, particularly with long chain aliphatic surfactants. After the ion-exchange process, the basal spacing of the LDH was increased and the increase of the basal spacing depended on various factors, such as the intercalation capacity functionality and orientation capability of the surfactant. Of the employed surfactants, stearic acid intercalated LDH ...

  3. Computation of Bond Dissociation Energies for Removal of Nitrogen Dioxide Groups in Certain Aliphatic Nitro Compounds

    Institute of Scientific and Technical Information of China (English)

    SHAO Ju-Xiang; CHENG Xin-Lu; YANG Xiang-Dong; XIANG Shi-Kai

    2006-01-01

    @@ Bond dissociation energies for removal of nitrogen dioxide groups in 10 aliphatic nitro compounds, including nitromethane, nitroethylene, nitroethane, dinitromethane, 1-nitropropane, 2-nitropropane, 1-nitrobutane,2-methyl-2-nitropropane, nitropentane, and nitrohexane, are calculated using the highly accurate complete basis set (CBS-Q) and the three hybrid density functional theory (DFT) methods B3LYP, B3PW91 and B3P86 with 6-31G** basis set.

  4. Secondary organic aerosol formation from primary aliphatic amines with NO3 radical

    OpenAIRE

    Q. G. J. Malloy; Li Qi; B. Warren; Cocker III, D. R.; M. E. Erupe; Silva, P J

    2009-01-01

    Primary aliphatic amines are an important class of nitrogen containing compounds emitted from automobiles, waste treatment facilities and agricultural animal operations. A series of experiments conducted at the UC-Riverside/CE-CERT Environmental Chamber is presented in which oxidation of methylamine, ethylamine, propylamine, and butylamine with O3 and NO3 have been investigated. Very little aerosol formation is observed in the presence of O3 only. However, after addition of ...

  5. Secondary organic aerosol formation from primary aliphatic amines with NO3 radical

    OpenAIRE

    M. E. Erupe; Cocker III, D. R.; B. Warren; Li Qi; Q. G. J. Malloy; Silva, P J

    2008-01-01

    Primary aliphatic amines are an important class of nitrogen containing compounds found to be emitted from automobiles, waste treatment facilities and agricultural animal operations. A series of experiments conducted at the UC-Riverside/CE-CERT Environmental Chamber is presented in which oxidation of methylamine, ethylamine, propylamine, and butylamine with NO3 has been investigated. Very little aerosol formation is observed in the presence of O3 only. However, after addition of NO, and by ext...

  6. Secondary Organic Aerosol Formation from Primary Aliphatic Amines with Nitrate Radical

    OpenAIRE

    Q. G. J. Malloy; Qi, L; B. Warren; Cocker III, D. R.; M. E. Erupe; Silva, P J

    2009-01-01

    Primary aliphatic amines are an important class of nitrogen containing compounds emitted from automobiles, waste treatment facilities and agricultural animal operations. A series of experiments conducted at the UC-Riverside/CECERT Environmental Chamber is presented in which oxidation of methylamine, ethylamine, propylamine, and butylamine with O3 and NO3 have been investigated. Very little aerosol formation is observed in the presence of O3 only. However, after addition of NO, and by extensio...

  7. Coefficients of caffeine distribution in aliphatic alcohol-ammonium sulfate-water systems

    Science.gov (United States)

    Korenman, Ya. I.; Krivosheeva, O. A.; Mokshina, N. Ya.

    2012-11-01

    The extraction of caffeine with aliphatic alcohols C3-C9 from aqueous solutions in the presence of a salting-out agent (ammonium sulfate) is studied. Quantitative characteristics of extraction are calculated: the distribution coefficients ( D) and the degree of recovery ( R, %). Relations are found between log D of caffeine and the length of the hydrocarbon radical in the alcohol molecule, along with certain physicochemical properties of the extragents.

  8. Unique gas and hydrocarbon adsorption in a highly porous metal-organic framework made of extended aliphatic ligands.

    Science.gov (United States)

    Li, Kunhao; Lee, Jeongyong; Olson, David H; Emge, Thomas J; Bi, Wenhua; Eibling, Matthew J; Li, Jing

    2008-12-14

    High and unique gas and hydrocarbon adsorption in a highly stable guest-free microporous metal-organic framework constructed on rigid aliphatic ligands, H(2)bodc and ted, is reported in this work. PMID:19082093

  9. Olfactory discrimination ability for aliphatic esters in squirrel monkeys and humans.

    Science.gov (United States)

    Laska, M; Freyer, D

    1997-08-01

    Using a behavioral paradigm designed to simulate olfactory-guided foraging, the ability of five squirrel monkeys to distinguish iso-amyl acetate from n- and iso-forms of other acetic esters (ethyl acetate to decyl acetate) and from other esters carrying the iso-amyl group (iso-amyl propionate to iso-amyl capronate) was investigated. We found (i) that all five animals were clearly able to discriminate between all odor pairs tested; (ii) a significant negative correlation between discrimination performance and structural similarity of odorants in terms of differences in carbon chain length of both the aliphatic alcohol group and the aliphatic acid group of the esters; and (iii) that iso- and n-amyl acetate were perceived as qualitatively similar despite different steric conformation. Using a triple-forced choice procedure, 20 human subjects were tested on the same tasks in parallel and showed a very similar pattern of discrimination performance compared with the squirrel monkeys. Thus, the results of this study provide evidence of well-developed olfactory discrimination ability in squirrel monkeys for aliphatic esters and support the assumption that human and non-human primates may share common principles of odor quality perception. PMID:9279468

  10. Exploring mild enzymatic sustainable routes for the synthesis of bio-degradable aromatic-aliphatic oligoesters.

    Science.gov (United States)

    Pellis, Alessandro; Guarneri, Alice; Brandauer, Martin; Acero, Enrique Herrero; Peerlings, Henricus; Gardossi, Lucia; Guebitz, Georg M

    2016-05-01

    The application of Candida antarctica lipase B in enzyme-catalyzed synthesis of aromatic-aliphatic oligoesters is here reported. The aim of the present study is to systematically investigate the most favorable conditions for the enzyme catalyzed synthesis of aromatic-aliphatic oligomers using commercially available monomers. Reaction conditions and enzyme selectivity for polymerization of various commercially available monomers were considered using different inactivated/activated aromatic monomers combined with linear polyols ranging from C2 to C12 . The effect of various reaction solvents in enzymatic polymerization was assessed and toluene allowed to achieve the highest conversions for the reaction of dimethyl isophthalate with 1,4-butanediol and with 1,10-decanediol (88 and 87% monomer conversion respectively). Mw as high as 1512 Da was obtained from the reaction of dimethyl isophthalate with 1,10-decanediol. The obtained oligomers have potential applications as raw materials in personal and home care formulations, for the production of aliphatic-aromatic block co-polymers or can be further functionalized with various moieties for a subsequent photo- or radical polymerization. PMID:26762794

  11. Kinetics of acid-catalyzed aldol condensation reactions of aliphatic aldehydes

    Science.gov (United States)

    Casale, Mia T.; Richman, Aviva R.; Elrod, Matthew J.; Garland, Rebecca M.; Beaver, Melinda R.; Tolbert, Margaret A.

    Field observations of atmospheric aerosols have established that organic compounds compose a large fraction of the atmospheric aerosol mass. However, the physical/chemical pathway by which organic compounds are incorporated into atmospheric aerosols remains unclear. The potential role of acid-catalyzed reactions of organic compounds on acidic aerosols has been explored as a possible chemical pathway for the incorporation of organic material into aerosols. In the present study, ultraviolet-visible (UV-vis) spectroscopy was used to monitor the kinetics of formation of the products of the acid-catalyzed aldol condensation reaction of a range of aliphatic aldehydes (C 2-C 8). The experiments were carried out at various sulfuric acid concentrations and a range of temperatures in order to estimate the rate constants of such reactions on sulfuric acid aerosols under tropospheric conditions. The rate constants were generally found to decrease as the chain length of the aliphatic aldehyde increased (except for acetaldehyde, which had an unusually small rate constant), increase as a function of sulfuric acid concentration as predicted by excess acidity theory, and showed normal Arrhenius behavior as a function of temperature. While the kinetic data are generally consistent with previous laboratory reports of aldehyde reactivity in various sulfuric acid media, the aldol condensation reactions involving aliphatic aldehydes do not appear fast enough to be responsible for significant transfer of organic material into atmospheric aerosols.

  12. Kinetics of aerobic cometabolic biodegradation of chlorinated and brominated aliphatic hydrocarbons: A review.

    Science.gov (United States)

    Jesus, João; Frascari, Dario; Pozdniakova, Tatiana; Danko, Anthony S

    2016-05-15

    This review analyses kinetic studies of aerobic cometabolism (AC) of halogenated aliphatic hydrocarbons (HAHs) from 2001-2015 in order to (i) compare the different kinetic models proposed, (ii) analyse the estimated model parameters with a focus on novel HAHs and the identification of general trends, and (iii) identify further research needs. The results of this analysis show that aerobic cometabolism can degrade a wide range of HAHs, including HAHs that were not previously tested such as chlorinated propanes, highly chlorinated ethanes and brominated methanes and ethanes. The degree of chlorine mineralization was very high for the chlorinated HAHs. Bromine mineralization was not determined for studies with brominated aliphatics. The examined research period led to the identification of novel growth substrates of potentially high interest. Decreasing performance of aerobic cometabolism were found with increasing chlorination, indicating the high potential of aerobic cometabolism in the presence of medium- and low-halogenated HAHs. Further research is needed for the AC of brominated aliphatic hydrocarbons, the potential for biofilm aerobic cometabolism processes, HAH-HAH mutual inhibition and the identification of the enzymes responsible for each aerobic cometabolism process. Lastly, some indications for a possible standardization of future kinetic studies of HAH aerobic cometabolism are provided. PMID:26874310

  13. Exploring mild enzymatic sustainable routes for the synthesis of bio-degradable aromatic-aliphatic oligoesters.

    Science.gov (United States)

    Pellis, Alessandro; Guarneri, Alice; Brandauer, Martin; Acero, Enrique Herrero; Peerlings, Henricus; Gardossi, Lucia; Guebitz, Georg M

    2016-05-01

    The application of Candida antarctica lipase B in enzyme-catalyzed synthesis of aromatic-aliphatic oligoesters is here reported. The aim of the present study is to systematically investigate the most favorable conditions for the enzyme catalyzed synthesis of aromatic-aliphatic oligomers using commercially available monomers. Reaction conditions and enzyme selectivity for polymerization of various commercially available monomers were considered using different inactivated/activated aromatic monomers combined with linear polyols ranging from C2 to C12 . The effect of various reaction solvents in enzymatic polymerization was assessed and toluene allowed to achieve the highest conversions for the reaction of dimethyl isophthalate with 1,4-butanediol and with 1,10-decanediol (88 and 87% monomer conversion respectively). Mw as high as 1512 Da was obtained from the reaction of dimethyl isophthalate with 1,10-decanediol. The obtained oligomers have potential applications as raw materials in personal and home care formulations, for the production of aliphatic-aromatic block co-polymers or can be further functionalized with various moieties for a subsequent photo- or radical polymerization.

  14. Aliphatic, cyclic, and aromatic organic acids, vitamins, and carbohydrates in soil: a review.

    Science.gov (United States)

    Vranova, Valerie; Rejsek, Klement; Formanek, Pavel

    2013-01-01

    Organic acids, vitamins, and carbohydrates represent important organic compounds in soil. Aliphatic, cyclic, and aromatic organic acids play important roles in rhizosphere ecology, pedogenesis, food-web interactions, and decontamination of sites polluted by heavy metals and organic pollutants. Carbohydrates in soils can be used to estimate changes of soil organic matter due to management practices, whereas vitamins may play an important role in soil biological and biochemical processes. The aim of this work is to review current knowledge on aliphatic, cyclic, and aromatic organic acids, vitamins, and carbohydrates in soil and to identify directions for future research. Assessments of organic acids (aliphatic, cyclic, and aromatic) and carbohydrates, including their behaviour, have been reported in many works. However, knowledge on the occurrence and behaviour of D-enantiomers of organic acids, which may be abundant in soil, is currently lacking. Also, identification of the impact and mechanisms of environmental factors, such as soil water content, on carbohydrate status within soil organic matter remains to be determined. Finally, the occurrence of vitamins in soil and their role in biological and biochemical soil processes represent an important direction for future research.

  15. CYP79F1 and CYP79F2 have distinct functions in the biosynthesis of aliphatic glucosinolates in Arabidopsis.

    Science.gov (United States)

    Chen, Sixue; Glawischnig, Erich; Jørgensen, Kirsten; Naur, Peter; Jørgensen, Bodil; Olsen, Carl-Erik; Hansen, Carsten H; Rasmussen, Hasse; Pickett, John A; Halkier, Barbara A

    2003-03-01

    Cytochromes P450 of the CYP79 family catalyze the conversion of amino acids to oximes in the biosynthesis of glucosinolates, a group of natural plant products known to be involved in plant defense and as a source of flavor compounds, cancer-preventing agents and bioherbicides. We report a detailed biochemical analysis of the substrate specificity and kinetics of CYP79F1 and CYP79F2, two cytochromes P450 involved in the biosynthesis of aliphatic glucosinolates in Arabidopsis thaliana. Using recombinant CYP79F1 and CYP79F2 expressed in Escherichia coli and Saccharomyces cerevisiae, respectively, we show that CYP79F1 metabolizes mono- to hexahomomethionine, resulting in both short- and long-chain aliphatic glucosinolates. In contrast, CYP79F2 exclusively metabolizes long-chain elongated penta- and hexahomomethionines. CYP79F1 and CYP79F2 are spatially and developmentally regulated, with different gene expression patterns. CYP79F2 is highly expressed in hypocotyl and roots, whereas CYP79F1 is strongly expressed in cotyledons, rosette leaves, stems, and siliques. A transposon-tagged CYP79F1 knockout mutant completely lacks short-chain aliphatic glucosinolates, but has an increased level of long-chain aliphatic glucosinolates, especially in leaves and seeds. The level of long-chain aliphatic glucosinolates in a transposon-tagged CYP79F2 knockout mutant is substantially reduced, whereas the level of short-chain aliphatic glucosinolates is not affected. Biochemical characterization of CYP79F1 and CYP79F2, and gene expression analysis, combined with glucosinolate profiling of knockout mutants demonstrate the functional role of these enzymes. This provides valuable insights into the metabolic network leading to the biosynthesis of aliphatic glucosinolates, and into metabolic engineering of altered aliphatic glucosinolate profiles to improve nutritional value and pest resistance. PMID:12609033

  16. Effect of chronic exposure to two components of Tritan copolyester on Daphnia magna, Moina macrocopa, and Oryzias latipes, and potential mechanisms of endocrine disruption using H295R cells.

    Science.gov (United States)

    Jang, Sol; Ji, Kyunghee

    2015-11-01

    Tritan copolyester is a novel plastic form from Eastman Company utilizing three main monomers, 1,4-cyclohexanedimethanol (CHDM), dimethyl terephthalate (DMT), and 2,2,4,4-tetramethyl-1,3-cyclobutanediol. Despite Tritan has been widely applied for plastic bottles, the effects of long-term exposure to these compounds have seldom been investigated. We investigated chronic effects and endocrine disruption potential of CHDM and terephthalic acid (TPA), main mammalian metabolite formed from DMT, using crustacean Daphnia magna and Moina macrocopa, and freshwater fish (Oryzias latipes). The effects on sex hormone balance and the associated mechanisms were also investigated by use of H295R cells. In chronic toxicity test, D. magna showed significant decrease in reproduction (number of young per female) after exposure to 10 mg/L TPA. In early life stage exposure using O. latipes, significant decrease of juvenile survival and weight were observed in fish exposed to 10 mg/L and ≥1 mg/L CHDM, respectively. Expressions of vtg2 mRNA in fish exposed to CHDM and those of cyp19b, star, cyp17, and cyp19a mRNAs in fish exposed to TPA were significantly up-regulated. The results of H295R cell assay also showed that both chemicals at high concentrations could alter sex hormone production in steroidogenic pathway. The effective concentrations of the tested compounds were several orders of magnitude greater than the concentrations can be detected in ambient waters. Further in vivo and in vitro studies will be needed to investigate the effect of co-polymer on endocrine disruption. PMID:26289545

  17. PET based nanocomposite films for microwave packaging applications

    International Nuclear Information System (INIS)

    In recent years, changes in life standards have promoted the diffusion of Ready to Cook (RTC) and Ready to Eat (RTE) products for microwave ovens. However, the main limits in microwave (MW) ovens usage are often related to the proper choice of packaging materials suitable for such technology. In fact, packages for microwaveable RTC and RTE foods should ensure adequate preservation of the product before cooking/heating such as high barriers to gases and aromas and adequate control of water vapor transmission. In addition, microwaveable packaging material must be transparent to MW, thermally stable and resistant to the mechanical stress induced by the accumulation in the head space of volatile substances produced during the cooking. Polymeric materials are good candidates for microwaveable packaging thanks to their transparency to MW. In the last years a great interest is devoted to developing innovative solution based on the use of additives or systems that act as susceptors or heating enhancers for improving the characteristics of polymers in cooking/heating in MW ovens. The present work was focused on the production and characterization of nanocomposite copolyester based films suitable for microwaveable food packaging applications. The matrices selected consist in two PET copolymers modified with carbon black (ULTRA STD) and with titanium oxide (ULTRA NA). Nanocomposite co-extruded multilayer films were produced using different percentages (0%, 2% and 4%wt/wt) of Cloisite 20A (C20A). Films were analyzed for evaluating the effect of nanofiller on the morphology and barrier properties. Moreover, to verify the effectiveness of the designed systems in reducing the cooking times of meat products, MW heating tests were carried out on pork meat hamburgers in MW oven at varying supplied powers. The cooking tests have pointed out that the selected matrices are efficient in reducing cooking times and that even low concentration of C20A acts as heating enhancers of PET

  18. PET based nanocomposite films for microwave packaging applications

    Science.gov (United States)

    Galdi, M. R.; Olivieri, R.; Liguori, L.; Albanese, D.; Di Matteo, M.; Di Maio, L.

    2015-12-01

    In recent years, changes in life standards have promoted the diffusion of Ready to Cook (RTC) and Ready to Eat (RTE) products for microwave ovens. However, the main limits in microwave (MW) ovens usage are often related to the proper choice of packaging materials suitable for such technology. In fact, packages for microwaveable RTC and RTE foods should ensure adequate preservation of the product before cooking/heating such as high barriers to gases and aromas and adequate control of water vapor transmission. In addition, microwaveable packaging material must be transparent to MW, thermally stable and resistant to the mechanical stress induced by the accumulation in the head space of volatile substances produced during the cooking. Polymeric materials are good candidates for microwaveable packaging thanks to their transparency to MW. In the last years a great interest is devoted to developing innovative solution based on the use of additives or systems that act as susceptors or heating enhancers for improving the characteristics of polymers in cooking/heating in MW ovens. The present work was focused on the production and characterization of nanocomposite copolyester based films suitable for microwaveable food packaging applications. The matrices selected consist in two PET copolymers modified with carbon black (ULTRA STD) and with titanium oxide (ULTRA NA). Nanocomposite co-extruded multilayer films were produced using different percentages (0%, 2% and 4%wt/wt) of Cloisite 20A (C20A). Films were analyzed for evaluating the effect of nanofiller on the morphology and barrier properties. Moreover, to verify the effectiveness of the designed systems in reducing the cooking times of meat products, MW heating tests were carried out on pork meat hamburgers in MW oven at varying supplied powers. The cooking tests have pointed out that the selected matrices are efficient in reducing cooking times and that even low concentration of C20A acts as heating enhancers of PET.

  19. PET based nanocomposite films for microwave packaging applications

    Energy Technology Data Exchange (ETDEWEB)

    Galdi, M. R., E-mail: mrgaldi@unisa.it; Olivieri, R.; Liguori, L.; Albanese, D., E-mail: dalbanese@unisa.it; Di Matteo, M.; Di Maio, L., E-mail: ldimaio@unisa.it [Industrial Engineering Department, University of Salerno, Via Giovanni Paolo II 132, 84084 Fisciano (Italy)

    2015-12-17

    In recent years, changes in life standards have promoted the diffusion of Ready to Cook (RTC) and Ready to Eat (RTE) products for microwave ovens. However, the main limits in microwave (MW) ovens usage are often related to the proper choice of packaging materials suitable for such technology. In fact, packages for microwaveable RTC and RTE foods should ensure adequate preservation of the product before cooking/heating such as high barriers to gases and aromas and adequate control of water vapor transmission. In addition, microwaveable packaging material must be transparent to MW, thermally stable and resistant to the mechanical stress induced by the accumulation in the head space of volatile substances produced during the cooking. Polymeric materials are good candidates for microwaveable packaging thanks to their transparency to MW. In the last years a great interest is devoted to developing innovative solution based on the use of additives or systems that act as susceptors or heating enhancers for improving the characteristics of polymers in cooking/heating in MW ovens. The present work was focused on the production and characterization of nanocomposite copolyester based films suitable for microwaveable food packaging applications. The matrices selected consist in two PET copolymers modified with carbon black (ULTRA STD) and with titanium oxide (ULTRA NA). Nanocomposite co-extruded multilayer films were produced using different percentages (0%, 2% and 4%wt/wt) of Cloisite 20A (C20A). Films were analyzed for evaluating the effect of nanofiller on the morphology and barrier properties. Moreover, to verify the effectiveness of the designed systems in reducing the cooking times of meat products, MW heating tests were carried out on pork meat hamburgers in MW oven at varying supplied powers. The cooking tests have pointed out that the selected matrices are efficient in reducing cooking times and that even low concentration of C20A acts as heating enhancers of PET.

  20. Homoeologous GSL-ELONG gene replacement for manipulation of aliphatic glucosinolates in Brassica rapa L. by marker assisted selection

    Directory of Open Access Journals (Sweden)

    Arvind H. Hirani

    2013-03-01

    Full Text Available Aliphatic glucosinolates are the predominant sulphur-rich plant secondary metabolites in economically important Brassica crops. Glucosinolates and their hydrolysis products are involved in plant-microbe, plant-insect, plant-animal and plant-human interactions. It is, therefore, important to manipulate glucosinolate profiles and contents in Brassica species. In this study, aliphatic glucosinolates were genetically manipulated through homoeologous recombination in backcross lines followed by marker assisted selection in B. rapa. A resynthesized B. napus line, from a cross between B. rapa and B. oleracea, was backcrossed with Chinese cabbage doubled haploid line, RI16. Marker assisted selection for non-functional gene was performed in each backcross generations. Advanced backcross progenies (BC3F2 were developed to identify homoeologous gene replacement and/or introgression. Reduction in 5C aliphatic glucosinolates (gluconapoleiferin, glucoalyssin and glucobrassicanapin was observed in BC3F2 progenies of the recurrent parent that carried the GSL-ELONG gene. The GSL-ELONG positive backcross progenies were also screened by the A-genome and BraGSL-ELONG gene specific marker, which linked with 5C aliphatic glucosinolates. The A-genome specific marker was absent in the plants of advanced backcross progenies which showed reduction in 5C aliphatic glucosinolates. The results suggest that the functional allele had been replaced by the non-functional GSL-ELONG allele from B. oleracea. Some advanced backcross progenies (BC3F2 positive for the GSL-ELONG allele and the A-genome specific SCAR marker BraMAM1-1 did not show reduction in 5C aliphatic glucosinolates, suggesting that GSL-ELONG allele is recessive. Replacement of the functional locus in the A genome by non-functional counterpart in the C genome reduced the content of 5C aliphatic glucosinolates in B. rapa seeds with 20 micromoles per gram.

  1. Ultrastructure of Escherichia coli cells under the action of a novel derivative of aryl aliphatic aminoalcohols

    Directory of Open Access Journals (Sweden)

    Dronova M.L.

    2014-12-01

    Full Text Available Background. Novel derivatives of aryl aliphatic aminoalcohols were examined for antimicrobial activity. Compound KVM-114 (4-(1,1,3,3-tetrabutyl phenoxy-3-dimethylamino-2-propanol hydrochloride was found as a selective against gram-negative bacteria. Objective. Investigation of compound KVM-114 influence on E. coli ultrastructure. Methods. Minimum inhibitory concentrations were determined by serial dilution method in Muller-Hinton broth. Bacteria (Escherichia coli for transmission electron microscopy samples preparation was grown to exponential phase and then was exposed to the subinhibitory concentration of KVM-114 for 1 h and 24 h. Results. Intact E. coli cells were rod-shaped with rounded ends. A light layer, allowing clear visualization of the cell wall, was observed between the сytoplasm and cytoplasmic membrane. Lipopolysaccharide layer was well distinguished as well. Cytoplasm was filled with ribosomes and polyribosomes. 1 hour exposition to KVM-114 at a subinhibitory concentration resulted in the absence of polyribosomes in the cytoplasm. Increase of electron density of lipopolysaccharide layer and cell wall indicate alteration of cell envelope. Prolongation of the incubation period to 24 hours led to cell recovery: no changes were observed, compared to control cells. The data obtained suggest compound’s ability to alter cell envelope and metabolic activity, however, subinhibitory concentration is apparently not sufficient for total inhibition of E. coli growth. Conclusion. The derivative of aryl aliphatic aminoalcohols, compound KVM-114, possesses inhibitory activity against gram-negative bacteria. E. coli treatment with this compound resulted in structural changes of the cell wall and alteration of intracellular processes. Citation: Dronova ML, Voychuk SI, Vrynchanu NO. [Ultrastructure of Escherichia coli cells under the action of a novel derivative of aryl aliphatic aminoalcohols]. Morphologia. 2014;8(4:26-9. Ukrainian.

  2. Solid state and sub-cooled liquid vapour pressures of cyclic aliphatic dicarboxylic acids

    Directory of Open Access Journals (Sweden)

    A. M. Booth

    2010-10-01

    Full Text Available Knudsen Effusion Mass Spectrometry (KEMS has been used to measure for the first time the solid state vapour pressures of a series of aliphatic cyclic dicarboxylic acids with increasing ring size. Additionally the atmospherically important compounds; cis-pinonic acid and levoglucosan were also measured. Differential Scanning Calorimetry (DSC was used to measure melting points, enthalpies and entropies of fusion, which were used to determine sub-cooled liquid vapour pressures for the compounds. The sub-cooled liquid vapour pressure of straight chain, branched and cyclic dicarboxylic acids was compared to a selection of estimation methods.

  3. Simultaneous determination of aliphatic hydrocarbons, PCBs and PCTs in pork liver by gas chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Barros, C. [Dept. de Quimica Analitica, Nutricion y Bromatologia, Area Nutricion y Bromatologia, Facultad de Farmacia, Santiago de Compostela (Spain); Alvarez Pineiro, M.E. [Inst. de Investigacion y Analisis Alimentarios, Lab. de Bromatologia, Facultad de Farmacia, Santiago de Compostela (Spain); Simal Lozano, J. [Dept. de Quimica Analitica, Nutricion y Bromatologia, Area Nutricion y Bromatologia, Facultad de Farmacia, Santiago de Compostela (Spain); Lage Yusty, M.A. [Inst. de Investigacion y Analisis Alimentarios, Lab. de Bromatologia, Facultad de Farmacia, Santiago de Compostela (Spain)

    1996-10-01

    A multicomponent extraction/concentration procedure has been developed for the enrichment of PCBs, PCTs and aliphatic hydrocarbons (pristane, C{sub 18}, C{sub 19}, C{sub 20}, C{sub 22}, C{sub 24}, C{sub 28}, C{sub 32} and C{sub 36}) in pork liver. These components of the enriched extract were then simultaneously determined by gas chromatography. Mean recoveries ranged from 81.5% for pristane to 93% for PCBs; CV % (0.9-6.7) indicated the method to be both precise and reproducible. (orig.)

  4. Using the Griess colorimetric nitrite assay for measuring aliphatic β-nitroalcohols

    OpenAIRE

    Wen, Quan; Paik, David C

    2012-01-01

    Our recent studies suggest that aliphatic β-nitroalcohols (BNAs) may represent a useful class of compounds for topical therapeutic corneoscleral cross-linking agents. Thus, this study was undertaken in order to standardize a simple method for nitroalcohol quantitation based on a denitration step followed by colorimetric Griess nitrite assay. Conditions necessary for denitration included a pH of 7-9 and heating for 1 hour at 100°C. Standard curves for two mono-nitroalcohols (2-nitroethanol and...

  5. Abilities of some higher plants to hydrolyze the acetates of phenols and aromatic-aliphatic alcohols

    Directory of Open Access Journals (Sweden)

    Agnieszka Mironowicz

    2014-02-01

    Full Text Available In the biotransformations carried out under the same conditions, the whole intact plants of Spirodela punctata, Nephrolepis exaltata, Cyrtomium falcatum, Nephrolepis cordifolia and the suspension cultures of Helianthus tuberosus, Daucus carota and Petunia hybrida hydrolyze (partially or totally the ester bonds of the acetates of phenols and aromatic-aliphatic alcohols and also the menthyl acetate. Nevertheless, the methyl esters of aromatic acids, structurally similar to the former substrates, do not undergo hydrolysis. At the same time, the viability of first four plants was observed for different levels of acetate concentration. The method of continuous preparative hydrolysis of the same acetates was worked out in Cyrtomium falcatum culture.

  6. A QSPR STUDY OF NORMAL BOILING POINT OF ORGANIC COMPOUNDS (ALIPHATIC ALKANES USING MOLECULAR DESCRIPTORS

    Directory of Open Access Journals (Sweden)

    B. Souyei

    2013-12-01

    Full Text Available A quantitative structure–property relationship (QSPR study is carried out to develop correlations that relate the molecular structures of organic compounds (Aliphatic Alkanes to their normal boiling point (NBP and two correlations were proposed for constitutionals and connectivity indices Models. The correlations are simple in application with good accuracy, which provide an easy, direct and relatively accurate way to calculate NBP. Such calculation gives us a model that gives results in remarkable correlations with the descriptors of blokes constitutionals (CON, and connectivity indices (CI (R2 = 0.950, δ = 0.766 (R2 = 0.969, δ = 0.782 respectively.

  7. Design, Synthesis and Cytotoxic Activities of Novel Aliphatic Amino-Substituted Flavonoids

    OpenAIRE

    Guannan Liu; Zhen Ge; Mengdan Zhao; Yifeng Zhou

    2013-01-01

    A series of flavonoids 9a–f, 13b, 13d, 13e and 14a–f bearing diverse aliphatic amino moieties were designed, synthesized and evaluated for their cytotoxic activities against the ECA-109, A-549, HL-60, and PC-3 cancer cell lines. Most of the compounds exhibited moderate to good activities. The structure-activity relationships were studied, revealing that the chalcone skeleton is the most preferable for cytotoxic activities. Chalcone 9d was the most promising compound due to its high potency ag...

  8. The C--H Stretching Features at 3.2--3.5 Micrometer of Polycyclic Aromatic Hydrocarbons with Aliphatic Sidegroups

    CERN Document Server

    Yang, Xuejuan; Glaser, Rainer; Zhong, Jianxin

    2016-01-01

    The so-called unidentified infrared emission (UIE) features at 3.3, 6.2, 7.7, 8.6, and 11.3 micrometer are ubiquitously seen in a wide variety of astrophysical regions. The UIE features are characteristic of the stretching and bending vibrations of aromatic hydrocarbon materials, e.g., polycyclic aromatic hydrocarbon (PAH) molecules. The 3.3 micrometer aromatic C--H stretching feature is often accompanied by a weaker feature at 3.4 micrometer. The latter is often thought to result from the C--H stretch of aliphatic groups attached to the aromatic systems. The ratio of the observed intensity of the 3.3 micrometer aromatic C--H feature to that of the 3.4 micrometer aliphatic C--H feature allows one to estimate the aliphatic fraction of the UIE carriers, provided that the intrinsic oscillator strengths of the 3.3 micrometer aromatic C--H stretch (A3.3) and the 3.4 micrometer aliphatic C--H stretch (A3.4) are known. While previous studies on the aliphatic fraction of the UIE carriers were mostly based on the A3.4...

  9. Aliphatic and polycyclic aromatic hydrocarbons in sediments of the Slovenian coastal area (Gulf of Trieste, northern Adriatic).

    Science.gov (United States)

    Bajt, Oliver

    2012-12-01

    The distribution and sources of aliphatic and polycyclic aromatic hydrocarbons (PAH) were determined in sediments at seven sites around the Slovenian coastal area. The potential toxicological significance was also assessed using biological thresholds. The results of the analyses showed higher concentrations of hydrocarbons in the Port of Koper and in the Marina of Portoroz. The influence of pollution was also evident in rather higher concentrations of hydrocarbons in the surrounding area in the Bays of Koper and Piran. Concentrations of hydrocarbons decrease toward the central part of the Gulf of Trieste. The major component of the aliphatic fraction was the unresolved complex mixture. Concentrations of the total resolved aliphatic hydrocarbons were in a range from 689 to 3,164 ng g(-1). Concentrations of the total PAHs were between 330 and 1,173 ng g(-1). Polycyclic aromatic hydrocarbons are primarily of pyrolytic origin with some smaller contributions of the petrogenic, while the aliphatic are mostly of petrogenic origin with significant amounts of biogenic derived compounds of terrestrial and marine origin. Strong evidence of the diagenetic origin of perylene in the investigated area was also found. Quite a good linear relationship between PAH concentration and TOC and between aliphatic hydrocarbon concentrations and TOC was observed. The principal component analysis showed differences between the nearshore and offshore sites. In general, the investigated area is moderately contaminated by hydrocarbons. Concentrations of PAHs, hydrocarbons of high concern, are below the levels (effects range low and the effects range median) associated with adverse biological effects. PMID:22270593

  10. Halides with Fifteen Aliphatic C–H···Anion Interaction Sites

    Science.gov (United States)

    Shi, Genggongwo; Aliakbar Tehrani, Zahra; Kim, Dongwook; Cho, Woo Jong; Youn, Il-Seung; Lee, Han Myoung; Yousuf, Muhammad; Ahmed, Nisar; Shirinfar, Bahareh; Teator, Aaron J.; Lastovickova, Dominika N.; Rasheed, Lubna; Lah, Myoung Soo; Bielawski, Christopher W.; Kim, Kwang S.

    2016-07-01

    Since the aliphatic C–H···anion interaction is relatively weak, anion binding using hydrophobic aliphatic C–H (Cali–H) groups has generally been considered not possible without the presence of additional binding sites that contain stronger interactions to the anion. Herein, we report X-ray structures of organic crystals that feature a chloride anion bound exclusively by hydrophobic Cali–H groups. An X-ray structure of imidazolium-based scaffolds using Cali–H···A‑ interactions (A‑ = anion) shows that a halide anion is directly interacting with fifteen Cali–H groups (involving eleven hydrogen bonds, two bidentate hydrogen-bond-type binding interactions and two weakly hydrogen-bonding-like binding interactions). Additional supporting interactions and/or other binding sites are not observed. We note that such types of complexes may not be rare since such high numbers of binding sites for an anion are also found in analogous tetraalkylammonium complexes. The Cali–H···A‑ interactions are driven by the formation of a near-spherical dipole layer shell structure around the anion. The alternating layers of electrostatic charge around the anion arise because the repulsions between weakly positively charged H atoms are reduced by the presence of the weakly negatively charged C atoms connected to H atoms.

  11. Halides with Fifteen Aliphatic C-H···Anion Interaction Sites.

    Science.gov (United States)

    Shi, Genggongwo; Aliakbar Tehrani, Zahra; Kim, Dongwook; Cho, Woo Jong; Youn, Il-Seung; Lee, Han Myoung; Yousuf, Muhammad; Ahmed, Nisar; Shirinfar, Bahareh; Teator, Aaron J; Lastovickova, Dominika N; Rasheed, Lubna; Lah, Myoung Soo; Bielawski, Christopher W; Kim, Kwang S

    2016-01-01

    Since the aliphatic C-H···anion interaction is relatively weak, anion binding using hydrophobic aliphatic C-H (Cali-H) groups has generally been considered not possible without the presence of additional binding sites that contain stronger interactions to the anion. Herein, we report X-ray structures of organic crystals that feature a chloride anion bound exclusively by hydrophobic Cali-H groups. An X-ray structure of imidazolium-based scaffolds using Cali-H···A(-) interactions (A(-) = anion) shows that a halide anion is directly interacting with fifteen Cali-H groups (involving eleven hydrogen bonds, two bidentate hydrogen-bond-type binding interactions and two weakly hydrogen-bonding-like binding interactions). Additional supporting interactions and/or other binding sites are not observed. We note that such types of complexes may not be rare since such high numbers of binding sites for an anion are also found in analogous tetraalkylammonium complexes. The Cali-H···A(-) interactions are driven by the formation of a near-spherical dipole layer shell structure around the anion. The alternating layers of electrostatic charge around the anion arise because the repulsions between weakly positively charged H atoms are reduced by the presence of the weakly negatively charged C atoms connected to H atoms. PMID:27444513

  12. Using of mass spectrum for prognosis of melting temperature of monatomic aliphatic spirits

    International Nuclear Information System (INIS)

    In present article researching possibility of prediction of melting temperature (MT) of monatomic aliphatic spirits with using mass-spectra as descriptors structure of molecules. Mass-spectra of 84 aliphatic spirits were used. Mass-spectra were preliminarily transformed on special formula before calculations for receiving work dates of descriptors. Calculations fulfilled with help of the computer program PROGROC. Quality of prediction characterized by coefficient of R-correlation between predicted and experimental dates MT and standard s-deviation. Coefficient of R-correlation between experimental and calculated dates account for 0.9785, standard s-deviation = 11.25 deg. C. Singly R and S for training and control excerpt equally 0.9789 and 11.31 deg. C, 0,9789 and 8.87 deg. C accordingly. Advantage of workable by us method lie in that, what on comparable with literature data of accuracy for prediction property is enough to have only mass-spectrum of substance

  13. Aliphatic and aromatic hydrocarbons in particulate fallout of Alexandria, Egypt: Sources and implications

    Energy Technology Data Exchange (ETDEWEB)

    Aboul-Kassim, T.A.T.; Simoneit, B.R.T. [Oregon State Univ., Corvallis, OR (United States)

    1995-10-01

    Particulate fallout samples (PFS) were collected in Alexandria, and their aliphatic and aromatic hydrocarbon compositions were determined both quantitatively and qualitatively to characterize the homologous and biomarker compounds in terms of their original sources. The results show that all samples contain aliphatic hydrocarbons, including n-alkanes, UCM, isoprenoids, tri- and tetracyclic terpanes, hopanes, and steranes/diasteranes. The main source of these compounds is from petrochemical contamination with trace input of terrestrial higher plant wax. In addition, polycyclic aromatic hydrocarbons, which are considered to be combustion products from fossil fuels such as petroleum, are also widely distributed in all samples. Multivariate statistical analysis, including extended Q-mode factor analysis and linear programming technique, was performed in order to reduce the hydrocarbon data set into a meaningful number of end members (sources). This analysis indicates that there are two significant end members explaining 90% of the total variation among the samples and confirming petrochemical (79.6%), and thermogenic/pyrolytic (10.4%) sources in the PFS model. 65 refs., 7 figs., 4 tabs.

  14. Branched aliphatic alkanes of shell bar section in Qarhan Lake, Qaidam Basin and their paleoclimate significance

    Institute of Scientific and Technical Information of China (English)

    ZHANG HuCai; CHANG FengQin; LI Bin; LEI GuoLiang; CHEN Yue; ZHANG WenXiang; NIU Jie; FAN HongFang; YANG MingSheng

    2007-01-01

    Biomarkers of paleolake deposits from Qarhan Salt Lake in Qaidam Basin, northwest China were systematically analyzed and the A-C series compounds of branched aliphatic alkanes with quaternary substituted carbon atom (BAQCs) were identified. The homologous distinguished three series, A-C,were identified as 5,5-diethylalkanes, 6,6-diethylalkanes and 5-butyl, 5-ethylalkanes series, and their relative abundance was A > B > C. Series A and C were characterized by odd carbon numbers, whereas series B was characterized by even carbon numbers. The high values of series A corresponded with the high values of series B and C. Therefore, it can be concluded that series A, B and C possess a similar biological origin. The abundance of series A was relatively Iow in the lower part of the section compared with that in the upper part, implying that these series originated from bacteria and/or algae more prevalent in fresh-mesohaline water, and such kinds of bacteria and/or algae are most likely to be thermophilous species. The A25/nC25 ratio differences in the section show that such branched aliphatic alkanes can be treated as one kind of environmental change proxy for paleolake evolution and may provide important information for the climate reconstruction of the Late Pleistocene.

  15. Decomposition mechanisms of trinitroalkyl compounds: a theoretical study from aliphatic to aromatic nitro compounds.

    Science.gov (United States)

    Fayet, Guillaume; Rotureau, Patricia; Minisini, Benoit

    2014-04-14

    The chemical mechanisms involved in the decomposition of trinitroethyl compounds were studied for both aliphatic and aromatic derivatives using density functional theory calculations. At first, in the case of 1,1,1-trinitrobutane, used as a reference molecule, two primary channels were highlighted among the five investigated ones: the breaking of the C-N bond and the HONO elimination. Then, the influence of various structural parameters was studied for these two reactions by changing the length of the carbon chain, adding substituents or double bonds along the carbon chain. If some slight changes in activation energies were observed for most of these features, no modification of the competition between the two investigated reactions was highlighted and the breaking of the C-N bond remained the favoured mechanism. At last, the reactions involving the trinitroalkyl fragments were highlighted to be more competitive than reactions involving nitro groups linked to aromatic cycles in two aromatic systems (4-(1,1,1-trinitrobutyl)-nitrobenzene and 2-(1,1,1-trinitrobutyl)-nitrobenzene). This showed that aromatic nitro compounds with trinitroalkyl derivatives decompose from their alkyl part and may be considered more likely as aliphatic than as aromatic regarding the initiation of their decomposition process.

  16. Aliphatic esters as targets of esterase activity in the parsnip webworm (Depressaria pastinacella).

    Science.gov (United States)

    Zangerl, Arthur R; Liao, Ling-Hsiu; Jogesh, Tania; Berenbaum, May R

    2012-02-01

    As a specialist on the reproductive structures of Pastinaca sativa and species in the related genus Heracleum, the parsnip webworm (Depressaria pastinacella) routinely encounters a distinctive suite of phytochemicals in hostplant tissues. Little is known, however, about the detoxification mechanisms upon which this species relies to metabolize these compounds. In this study, larval guts containing hostplant tissues were homogenized, and metabolism was determined by incubating reactions with and without NADPH and analyzing for substrate disappearance and product appearance by gas chromatography-mass spectrometry. Using this approach, we found indications of carboxylesterase activity, in the form of appropriate alcohol metabolites for three aliphatic esters in hostplant tissues-octyl acetate, octyl butyrate, and hexyl butyrate. Involvement of webworm esterases in hostplant detoxification subsequently was confirmed with metabolism assays with pure compounds. This study is the first to implicate esterases in lepidopteran larval midgut metabolism of aliphatic esters, ubiquitous constituents of flowers and fruits. In addition, this method confirmed that webworms detoxify furanocoumarins and myristicin in their hostplants via cytochrome P450-mediated metabolism, and demonstrated that these enzymes also metabolize the coumarin osthol and the fatty acid derivative palmitolactone. PMID:22350520

  17. Extraction and solubility characteristics of metal aliphatic carboxylates in a hexane medium

    International Nuclear Information System (INIS)

    Extractions of 30 metal ions with aliphatic carboxylic acids into hexane were carried out to understand their extraction behavior. Results were expressed in an area-graph form for metal partitions among the three (aqueous, organic and/or solid) phases in the range pH 1-9. The difference in half-extraction pH (pH1/2) between various metals can be explained by the electrostatic effect (hard acids) and the polarizability. According to the solubility of the metal complexes into organic phase, the thirty metal ions were divided into two groups. The metal ions with high ionic potential (group A) were generally extractable by every carboxylic acid tested. The large size metal ions (group B) precipitated at the liquid/liquid interface by n-aliphatic carboxylic acids and were perfectly extracted by 2-ethylhexanoic acid. We propose that this difference in the group B is caused by interface-coagulation through inter-molecular hydrophobic bond formation in the former, while the branched chain in the carboxylic acid weakens the interaction in the latter. For group A, therefore, most of the extracted species would be origomers so that no coagulation would occur. (author)

  18. New aliphatic glycerophosphoryl-containing polyurethanes: synthesis, platelet adhesion and elution cytotoxicity studies.

    Science.gov (United States)

    Acetti, Daniela; D'Arrigo, Paola; Giordano, Carmen; Macchi, Piero; Servi, Stefano; Tessaro, Davide

    2009-04-01

    in this study new poly(ether)urethanes (PeUs) based on aliphatic diisocyanates were synthesized with phospholipid-like residues as chain extenders. The primary objective was to prepare new polyurethanes from diisocyanates that are less toxic than the aromatic ones widely used in medical-grade polyurethanes, in order to investigate the effect of the different aromatic or aliphatic hard segment content on the final properties of the materials. Some glycerophospho residues were simultaneously introduced to enhance the hemocompatibility of these materials. Polymers were prepared by a conventional two-step solution polymerization procedure using hexamethylene diisocyanate (HDi) and dodecametilendiisocyanate (DDi) and poly(1,4-butanediol) with molecular weight 1000 to form prepolymers, which were subsequently polymerized with 1-glycerophosphorylcholine (1-GPC) or glycerophosphorylserine (GPS) to act as chain extenders. The reference polymers bearing 1,4-butandiol (BD) were also synthesized. The polymers obtained were characterized by fourier transform infrared spectroscopy (fT-iR), nuclear magnetic resonance (1H nmR), and differential scanning calorimetry (DSC). The hemocompatibility of synthesized segmented polyurethanes was preliminarily investigated by platelet-rich plasma contact studies and related scanning electron microscopy (Sem) photographs as well as by cell viability assay after cell exposure to material elutions to assess the effect of any toxic leachables coming out from the samples. Two of the polymers gave interesting results, suggesting the desirability of further investigation into their possible use in biomedical devices. PMID:19569028

  19. Hyperbranched Aliphatic Polyester Modified Activated Carbon Particles with Homogenized Surface Groups

    Science.gov (United States)

    Liu, Peng; Zhang, Liuxue

    The hyperbranched aliphatic polyester grafted activated carbon (HAPE-AC), was successfully prepared by the simple "one-pot" method. The surface functional groups of commercial activated carbon particles were homogenized to hydroxyl groups by being oxidized with nitric acid and then reduced with lithium tetrahydroaluminate (LiAlH4) at first. Secondly, the surface hydroxyl groups were used as the active sites for the solution polycondensation of the AB2 monomer, 2, 2-bis(hydroxymethyl)propionic acid (bis-MPA), with the catalysis of p-toluenesulfonic acid (p-TSA). The homogenization of the surface groups of the activated carbon particles and the graft polymerization of the hyperbranched aliphatic polyester were investigated by X-ray photoelectron spectroscopy (XPS) technique. The products were also characterized with Fourier transform infrared (FT-IR) and scanning electron microscope (SEM). The competitive adsorption properties of the products toward the heavy metal ions (Cu(II), Hg(II), Zn(II), and Cd(II)) also proved the translations of the surface groups.

  20. Phase diagrams in blends of poly(3-hydroxybutyric acid with various aliphatic polyesters

    Directory of Open Access Journals (Sweden)

    2011-07-01

    Full Text Available Phase behavior with immiscibility, miscibility, crystalline morphology, and kinetic analysis in blends of poly(3-hydroxybutyric acid (PHB with aliphatic polyesters such as poly(butylene adipate (PBA, poly(ethylene adipate (PEA, poly(trimethylene adipate (PTA, or poly(ethylene succinate (PESu, respectively, were explored mainly using differential scanning calorimeter (DSC and polarized-light optical microscopy (POM. Immiscibility phase behavior with reversible upper-critical-solution-temperature (UCST is common in the PHB/polyester blends. The polyester/polyester blend of PHB/PTA is partially miscible with no UCST in melt and amorphous glassy states within a composition range of PTA less than 50 wt%. The miscible crystalline/crystalline blend exhibits ring-banded spherulites at Tc = 50~100°C, with inter-ring spacing dependent on Tc. All immiscible or partially miscible PHB/polyester blends, by contrast, exhibit disrupted ringbanded spherulites or discrete spherical phase domains upon cooling from UCST to crystallization. The blends of PHB with all other aliphatic polyesters, such as PESu, PEA, PBA, etc. are only partially miscible or immiscible with an upper critical solution temperature (UCST at 180~221°C depending on blend composition. UCST with reversibility was verified.

  1. Anaerobic biotransformation of chlorinated aliphatic hydrocarbons: Ugly duckling to beautiful swan

    Energy Technology Data Exchange (ETDEWEB)

    Parkin, G.F.

    1999-10-01

    For many years anaerobic biological processes were reputed to be more sensitive than aerobic processes to toxic substances such as chlorinated aliphatic hydrocarbons (CAH) and thus a poor choice for treating water containing these compounds. This was especially true for water containing perchloroethylene (PCE) or trichloroethylene (TCE) because vinyl chloride, a human carcinogen, is produced when these two compounds are degraded anaerobically. Aerobic treatment with organisms containing oxygenase enzyme systems, which could fortuitously degrade a wide variety of chlorinated aliphatics (but not PCE), was favored. Recently, however, several enrichments and organisms have been isolated that will convert PCE and TCE into ethene and ethane, as shown by field data. Because of this evidence, anaerobic processes are now considered a significant alternative treatment for CAH contamination. Recent work at the University of Iowa, Iowa City, has focused on the effect of mixtures of CAHs on biotransformation of individual organic compounds and the potential for a combined methanogen-iron (Fe(0)) system to improve CAH bioremediation. At the concentration ranges tested, the presence of a mixture of CAHs seems to decrease rate of transformation of individual organics. However, there are important exceptions; in some cases a mixture of CAHs seems to facilitate transformation of an individual organic compound. Combination of an active methanogenic population with Fe(0) increases the rate and extent of transformation of carbon tetrachloride and chloroform. Results with PCE and 1,1,1-trichloroethane are less clear.

  2. Determination of aliphatic aldehydes by liquid chromatography with pulsed amperometric detection.

    Science.gov (United States)

    Casella, Innocenzo G; Contursi, Michela

    2005-01-21

    An electrochemical detection method for short-chain saturated and unsaturated aliphatic aldehydes separated by liquid chromatography in moderately acidic medium is described. A triple-step waveform of the potentials applied to the polycrystalline platinum electrode, is proposed for sensitive detection of aliphatic aldehydes in flowing streams avoiding tedious pre- or post-column derivatization and/or cleanup procedures. The influences of the perchloric acid concentration and dissolved oxygen in the mobile phase, on the amperometric and chromatographic performance were evaluated and considered in terms of sensitivity and selectivity. Under the optimised experimental conditions (i.e., deoxygenated 50mM HClO4) the proposed analytical method allowed detection limits between 0.2 microM for acrolein and 2.5 microM for valeraldehyde. Regression analysis of calibration data indicates that responses for all investigated compounds are linear over about 2 orders of magnitude above the LOD, with correlation coefficients >0.990. The method was successfully applied to the determination of formaldehyde, acetaldehyde, propionaldehyde and acrolein in real matrices such as spiked water and red wines with good mean recoveries (81-97%). PMID:15700464

  3. Direct β-C(sp(3))-H Functionalization of Aliphatic Amines to α,β-Unsaturated Imines, Aldehydes, and Chromenes.

    Science.gov (United States)

    Mandal, Sumana; Mahato, Sujit; Jana, Chandan K

    2015-08-01

    A metal-free method for direct β-C(sp(3))-H functionalization of aliphatic amine was developed. The method is based on a reaction that yields enamine directly from the corresponding aliphatic amine, which otherwise requires the aid of metallic reagent and/or external oxidant. The reaction is operationally simple, general, and highly efficient in functionalizing both cyclic and acyclic amines. Structurally diverse unsaturated imines were obtained from N-heterocycles, while acyclic amines provided 2-alkyl cinnamaldehyde and benzopyran derivatives with excellent E/Z-selectivity. PMID:26204435

  4. Thin Films

    Directory of Open Access Journals (Sweden)

    M. Benmouss

    2003-01-01

    the optical absorption are consistent with the film color changes. Finally, the optical and electrochromic properties of the films prepared by this method are compared with those of our sputtered films already studied and with other works.

  5. Thin Films Formed from Conjugated Polymers with Ionic, Water-Soluble Backbones.

    Science.gov (United States)

    Voortman, Thomas P; Chiechi, Ryan C

    2015-12-30

    This paper compares the morphologies of films of conjugated polymers in which the backbone (main chain) and pendant groups are varied between ionic/hydrophilic and aliphatic/hydrophobic. We observe that conjugated polymers in which the pendant groups and backbone are matched, either ionic-ionic or hydrophobic-hydrophobic, form smooth, structured, homogeneous films from water (ionic) or tetrahydrofuran (hydrophobic). Mismatched conjugated polymers, by contrast, form inhomogeneous films with rough topologies. The polymers with ionic backbone chains are conjugated polyions (conjugated polymers with closed-shell charges in the backbone), which are semiconducting materials with tunable bad-gaps, not unlike uncharged conjugated polymers.

  6. Mortality of Bemisia tabaci biotype B (sternorrhyncha: aleyrodidae adults by aliphatic and aromatic synthetic sucrose esters

    Directory of Open Access Journals (Sweden)

    Mariangela Alves

    2008-12-01

    Full Text Available The B-strain of Bemisia tabaci Gennadius is a key pest of several crops and chemical control is the main control method used by growers, although reduction in efficacy due to insecticide resistance has already been reported. The aim of this work was to investigate the insecticidal effect of an array of synthetic sucrose esters with the aliphatic and aromatic groups on whitefly adults. Sucrose butyrate, caprate, octanoate, palmitate, oleate, octaacetate, phthalate, benzoate, and sucrose diacetate hexaisobutyrate were tested. The solutions were prepared and applied on the adults caught on yellow sticky traps using the Potter spray tower. Long-chains sucrose aliphatic esters were more effective against the silverleaf whiteflies and the highest mortality was obtained with sucrose oleate and sucrose octanoate. Since these compounds were tensoactive, sodium dodecylsulphate was also tested for the comparison but no effect was observed. Sucrose butyrate and other aliphatic and aromatic sucrose polyesters showed negligible effect on the silverleaf whiteflies.O biótipo B de B. tabaci Gennadius tem se destacado como uma praga-chave de diversas culturas. O controle químico tem sido a principal tática de controle utilizada, embora já se tenha observado redução na eficiência dos produtos devido ao desenvolvimento de resistência. Assim, o objetivo do presente trabalho foi avaliar o efeito de diversos ésteres de sacarose com grupos alifáticos ou aromáticos sobre adultos de mosca-branca. Butirato de sacarose, caprato, octanoato, palmitato, oleato, actaacetato, ftlato, benzoato e diacetato hexaisobutirato de sacarose foram testados. Soluções de éster de sacarose foram preparadas e aplicadas sobre adultos capturados em armadilhas adesivas utilizando Torre de Potter. Ésteres alifáticos de sacarose com longas cadeias foram mais efetivos contra mosca-branca e as maiores taxas de mortalidade foram obtidas com oleato e octanoato de sacarose. Uma vez que

  7. Catalytic activity of carbon nanotubes in the conversion of aliphatic alcohols

    Science.gov (United States)

    Zhitnev, Yu. N.; Tveritinova, E. A.; Chernyak, S. A.; Savilov, S. V.; Lunin, V. V.

    2016-06-01

    Carbon nanotubes (CNTs) obtained via the catalytic pyrolysis of hexane at 750°C were studied as the catalysts in conversion of C2-C4 alcohols. The efficiency of CNTs as catalysts in dehydration and dehydrogenation of ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and tert-butanol was studied by means of pulse microcatalysis. The surface and structural characteristics of CNTs are investigated via SEM, TEM, DTA, BET, and XPS. CNTs are shown to be effective catalysts in the conversion of alcohols and do not require additional oxidative treatment. The regularities of the conversion of aliphatic alcohols, related to the properties of the CNTs surface and the structure of the alcohols are identified.

  8. Kinetics and mechanism of oxidation of aliphatic primary alcohols by quinolinium bromochromate

    Indian Academy of Sciences (India)

    Sonu Saraswat; Vinita Sharma; K K Banerji

    2003-02-01

    Oxidation of nine aliphatic primary alcohols by quinolinium bromochromate (QBC) in dimethylsulphoxide leads to the formation of the corresponding aldehydes. The reaction is first order with respect to both QBC and the alcohol. The reaction is catalysed by hydrogen ions. The hydrogen-ion dependence has the form: obs = + [H+]. The oxidation of [1,1-2H2]ethanol (MeCD2OH) exhibits a substantial primary kinetic isotope effect. The reaction has been studied in nineteen different organic solvents. The solvent effect was analysed using Taft’s and Swain's multiparametric equations. The rate of oxidation is susceptible to both polar and steric effects of the substituents. A suitable mechanism has been proposed.

  9. Kinetics and mechanism of oxidation of aliphatic alcohols by tetrabutylammonium tribromide

    Indian Academy of Sciences (India)

    Manju Baghmar; Pradeep K Sharma

    2001-04-01

    Oxidation of nine primary aliphatic alcohols by tetrabutylammonium tribromide (TBATB) in aqueous acetic acid leads to the formation of the corresponding aldehydes. The reaction is first order with respect to TBATB. Michaelis-Menten type kinetics is observed with respect to alcohols. The reaction failed to induce the polymerization of acrylonitrile. Tetrabutylammonium chloride has no effect on the reaction rate. The proposed reactive oxidizing species is the tribromide ion. The oxidation of [1,1-2H2]ethanol exhibits a substantial kinetic isotope effect. The effect of solvent composition indicates that the rate increases with increase in the polarity of the solvent. The reaction is susceptible to both polar and steric effects of substituents. A mechanism involving transfer of a hydride ion in the ratedetermining step has been proposed.

  10. Low-temperature microchip nonaqueous capillary electrophoresis of aliphatic primary amines: applications to Titan chemistry.

    Science.gov (United States)

    Cable, Morgan L; Stockton, Amanda M; Mora, Maria F; Willis, Peter A

    2013-01-15

    We demonstrate microchip nonaqueous capillary electrophoresis (μNACE) analysis of primary aliphatic amines (C1-C18) in ethanol down to -20 °C as a first step in adapting microfluidic protocols for in situ analysis on Titan. To our knowledge, this is the first report of a nonaqueous separation at -20 °C on-chip. Limits of detection (LODs) ranged from 1.0 nM to 2.6 nM, and we identified several primary amines ranging in length from C2 to C16 in Titan aerosol analogue (tholin) samples; new amines were also detected in a tholin sample exposed to oxygen and liquid water. This preliminary work validates the sensitivity and efficacy of microfluidic chemical analysis of complex organics with relevance to Titan aerosols and surface deposits. PMID:23214444

  11. Electrochemical oxidation of aliphatic amines and their attachment to carbon and metal surfaces.

    Science.gov (United States)

    Adenier, Alain; Chehimi, Mohamed M; Gallardo, Iluminada; Pinson, Jean; Vilà, Neus

    2004-09-14

    The electrochemical oxidation of aliphatic amines (primary, secondary, and tertiary) has been investigated by cyclic voltammetry and preparative electrolysis. The oxidation mechanisms have been established, and the lifetimes of the radical cations have been measured for secondary and tertiary amines. These results have been put in parallel with the attachment of amines to glassy carbon, Au, and Pt electrodes by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and infrared reflection-absorption spectroscopy (IRRAS). It is then possible to show that it is not the radical cation but the radical obtained after the deprotonation which reacts with the electrode surface. XPS results also point to the existence of a covalent bond between Au or Pt and the organic moiety.

  12. Purification of wet process phosphoric acid by solvent extraction with long-chain aliphatic amines

    International Nuclear Information System (INIS)

    Purification of phosphoric acid by solvent extraction with long-chain aliphatic amines is investigated. Extraction of cadmium is extensively examined regarding the importance of the aqueous phase, the diluent and the amine. The solubility of tri-n-octyl-amine is determined in water and phosphoric acid solutions. Properties of valuable constituent such as uranium and yttrium are screened. Modelling of the system is performed by adapting Bromley's model for electrolytes to the different dissociation/association equilibria in the aqueous phase. In the organic phase simple expressions are used for the non-ideal behaviour. Amine-acid equilibria are investigated for all acids present in industrial phosphoric acid. New extraction constants are calculated for phosphoric and hydro- fluosilic acid. Calculations are compared with experiments both from binary and multicomponent acid mixtures

  13. Modification of nano-sized layered double hydroxides by long-chain organic aliphatic surfactants

    Directory of Open Access Journals (Sweden)

    RAMASAMY ANBARASAN

    2008-03-01

    Full Text Available The inter-layer anion of layered double hydroxides (LDH with a hydrotalcite (HT-like structure was ion-exchanged with various organic surfactants, particularly with long chain aliphatic surfactants. After the ion-exchange process, the basal spacing of the LDH was increased and the increase of the basal spacing depended on various factors, such as the intercalation capacity functionality and orientation capability of the surfactant. Of the employed surfactants, stearic acid intercalated LDH showed the highest increase of the basal spacing, which was confirmed by XRD analysis. FTIR results supported the interaction of the surfactants with the LDH. In addition, an increase in the thermal stability of the dodecanedioic acid intercalated HT was evidenced by the TGA method.

  14. Platinum-Catalyzed, Terminal-Selective C(sp(3))-H Oxidation of Aliphatic Amines.

    Science.gov (United States)

    Lee, Melissa; Sanford, Melanie S

    2015-10-14

    This Communication describes the terminal-selective, Pt-catalyzed C(sp(3))-H oxidation of aliphatic amines without the requirement for directing groups. CuCl2 is employed as a stoichiometric oxidant, and the reactions proceed in high yield at Pt loadings as low as 1 mol%. These transformations are conducted in the presence of sulfuric acid, which reacts with the amine substrates in situ to form ammonium salts. We propose that protonation of the amine serves at least three important roles: (i) it renders the substrates soluble in the aqueous reaction medium; (ii) it limits binding of the amine nitrogen to Pt or Cu; and (iii) it electronically deactivates the C-H bonds proximal to the nitrogen center. We demonstrate that this strategy is effective for the terminal-selective C(sp(3))-H oxidation of a variety of primary, secondary, and tertiary amines. PMID:26439251

  15. Propargyl-functional aliphatic polycarbonate obtained from carbon dioxide and glycidyl propargyl ether.

    Science.gov (United States)

    Hilf, Jeannette; Frey, Holger

    2013-09-01

    The synthesis of propargyl-functional poly(carbonate)s with different content of glycidyl propargyl ether (GPE) units is achieved via the copolymerization of propargyl glycidyl ether and carbon dioxide. A new type of functional poly(carbonate) synthesized directly from CO(2) and the glycidyl ether is obtained. The resulting polymers show moderate polydispersities in the range of 1.6-2.5 and molecular weights in the range of 7000-10 500 g mol(-1). The synthesized copolymers with varying number of alkyne functionalities and benzyl azide are used for the copper-catalyzed Huisgen-1,3-dipolar addition. Moreover, the presence of vicinal alkyne groups opens a general pathway to produce functional aliphatic poly(carbonate)s from a single polymer scaffold.

  16. Synthesis and reactivity of aliphatic sulfur pentafluorides from substituted (pentafluorosulfanyl)benzenes.

    Science.gov (United States)

    Vida, Norbert; Václavík, Jiří; Beier, Petr

    2016-01-01

    Oxidation of 3- and 4-pentafluorosulfanyl-substituted anisoles and phenols with hydrogen peroxide and sulfuric acid provided a mixture of SF5-substituted muconolactone, maleic, and succinic acids. A plausible mechanism for the formation of the aliphatic SF5 compounds was presented and their chemical reactivity was investigated. SF5-substituted para-benzoquinone was synthesized; its oxidation led to an improved yield of 2-(pentafluorosulfanyl)maleic acid. The reaction of SF5-substituted maleic anhydride and para-benzoquinone with cyclopentadiene afforded the Diels-Alder adducts. Decomposition of 3-(pentafluorosulfanyl)muconolactone in acidic, neutral and basic aqueous media was investigated and the decarboxylation of 2-(pentafluorosulfanyl)maleic acid provided 3-(pentafluorosulfanyl)acrylic acid. PMID:26877813

  17. Direct optical observation of the formation of some aliphatic alcohol radicals. A pulse radiolysis study

    Indian Academy of Sciences (India)

    E Janata

    2002-12-01

    The kinetics of the reactions of hydroxyl radicals and hydrogen atoms with some aliphatic alcohols in aqueous solutions were studied using pulse radiolysis. Based on the increase in optical absorption in the UV region, the rate constants for the reaction of hydroxyl radicals and hydrogen atoms with methanol, ethanol, 2-propanol or -butyl alcohol were determined to be 9.0 × 108, 2.2 × 109, 2.0 × 109, 6.2 × 108 and 1.1 × 106, 1.8 × 107, 5.3 × 107, 2.3 × 105 dm3 mol-1 s-1 respectively. The bimolecular decay rate constants for the alcohol radicals produced in methanol and ethanol were evaluated to be 2 .4 × 109 and 1.5 × 109 dm3 mol-1 s-1. The values observed are in fairly good agreement with those reported earlier.

  18. Design, Synthesis and Cytotoxic Activities of Novel Aliphatic Amino-Substituted Flavonoids

    Directory of Open Access Journals (Sweden)

    Guannan Liu

    2013-11-01

    Full Text Available A series of flavonoids 9a–f, 13b, 13d, 13e and 14a–f bearing diverse aliphatic amino moieties were designed, synthesized and evaluated for their cytotoxic activities against the ECA-109, A-549, HL-60, and PC-3 cancer cell lines. Most of the compounds exhibited moderate to good activities. The structure-activity relationships were studied, revealing that the chalcone skeleton is the most preferable for cytotoxic activities. Chalcone 9d was the most promising compound due to its high potency against the examined cancer cell lines (its IC50 values against ECA-109, A549, HL-60 and PC-3 cells were 1.0, 1.5, 0.96 and 3.9 μM, respectively.

  19. A systems biology approach identifies a R2R3 MYB gene subfamily with distinct and overlapping functions in regulation of aliphatic glucosinolates.

    Directory of Open Access Journals (Sweden)

    Ida Elken Sønderby

    Full Text Available BACKGROUND: Glucosinolates are natural metabolites in the order Brassicales that defend plants against both herbivores and pathogens and can attract specialized insects. Knowledge about the genes controlling glucosinolate regulation is limited. Here, we identify three R2R3 MYB transcription factors regulating aliphatic glucosinolate biosynthesis in Arabidopsis by combining several systems biology tools. METHODOLOGY/PRINCIPAL FINDINGS: MYB28 was identified as a candidate regulator of aliphatic glucosinolates based on its co-localization within a genomic region controlling variation both in aliphatic glucosinolate content (metabolite QTL and in transcript level for genes involved in the biosynthesis of aliphatic glucosinolates (expression QTL, as well as its co-expression with genes in aliphatic glucosinolate biosynthesis. A phylogenetic analysis with the R2R3 motif of MYB28 showed that it and two homologues, MYB29 and MYB76, were members of an Arabidopsis-specific clade that included three characterized regulators of indole glucosinolates. Over-expression of the individual MYB genes showed that they all had the capacity to increase the production of aliphatic glucosinolates in leaves and seeds and induce gene expression of aliphatic biosynthetic genes within leaves. Analysis of leaves and seeds of single knockout mutants showed that mutants of MYB29 and MYB76 have reductions in only short-chained aliphatic glucosinolates whereas a mutant in MYB28 has reductions in both short- and long-chained aliphatic glucosinolates. Furthermore, analysis of a double knockout in MYB28 and MYB29 identified an emergent property of the system since the absence of aliphatic glucosinolates in these plants could not be predicted by the chemotype of the single knockouts. CONCLUSIONS/SIGNIFICANCE: It seems that these cruciferous-specific MYB regulatory genes have evolved both overlapping and specific regulatory capacities. This provides a unique system within which to

  20. Structure of zone-cast HBC-C12H25 films

    DEFF Research Database (Denmark)

    Breiby, Dag Werner; Bunk, Oliver; Pisula, W.;

    2005-01-01

    . The aliphatic side chains and the aromatic HBC-cores segregate to form regular vertical domains spanning the film thickness. For in-plane rocking scans a discrete orientation distribution is observed with peaks at regular angle intervals. We interpret this as a grain boundary effect induced by alkyl chain...

  1. Selective preparation of terminal alkenes from aliphatic carboxylic acids by a palladium-catalysed decarbonylation-eliminiation reaction

    NARCIS (Netherlands)

    Notre, le J.E.L.; Scott, E.L.; Franssen, M.C.R.; Sanders, J.P.M.

    2010-01-01

    Trialkylamines were used as additives in the decarbonylation–elimination reaction catalysed by the combination of palladium(II) chloride and DPE-Phos. Aliphatic carboxylic acids were transformed at relatively low temperature into terminal alkenes in high yield and high selectivity, without the need

  2. STUDY ON THE SEQUENCE STRUCTURE OF SBR BY 13C- NMR METHOD Ⅱ . PEAK ASSIGNMENT FOR ALIPHATIC CARBONS SPECTRA

    Institute of Scientific and Technical Information of China (English)

    JIAO Shuke; CHEN Xiaonong; HU Liping; YAN Baozhen

    1990-01-01

    The study on 13C-NMR spectra of aliphatic carbon region of emulsion-processed and solution-processed ( by lithium catalyst ) SBR was carried out. The assignments for more than thirty odd peaks observed experimentally were made by using " corresponding analysis " method, combined with the empirical parameters reported in literature. The peak intensities were calculated based on Bernoullian statistic assumption.

  3. Sources and distribution of aliphatic and polyaromatic hydrocarbons in coastal sediments from the Ushuaia Bay (Tierra del Fuego, Patagonia, Argentina).

    Science.gov (United States)

    Commendatore, Marta G; Nievas, Marina L; Amin, Oscar; Esteves, José L

    2012-03-01

    The environmental quality of Ushuaia Bay, located at the southernmost tip of South America, is affected by the anthropogenic pressure of Ushuaia city. In this study, levels and sources of hydrocarbons in coastal sediments were assessed. Aliphatic hydrocarbon fractions ranged between 5.5 and 1185.3 μg/g dry weight and PAHs from not detected to 360 ng/g. Aliphatic diagnostic indices, the nalkanes homologous series occurrence, Aliphatic Unresolved Complex Mixtures (AliUCMs), and pristane and phytane isoprenoids indicated a petrogenic input. Some sites showed biogenic features masked by the anthropogenic signature. Particularly in port areas biodegradation processes were evident. PAH ratios showed a mixture of petrogenic and pyrogenic sources. Aliphatic and aromatic UCMs were strongly correlated, reflecting chronic pollution. Three areas were distinguished inside the bay: (1) east, with low hydrocarbons impact; (2) central, where hydrocarbons accumulation was related to source proximity and sediment characteristics; (3) south-west, where sediment characteristics and current circulation favour hydrocarbons accumulation. PMID:22189069

  4. Liquid-phase synthesis of bridged peptides using olefin metathesis of a protected peptide with a long aliphatic chain anchor.

    Science.gov (United States)

    Aihara, Keisuke; Komiya, Chiaki; Shigenaga, Akira; Inokuma, Tsubasa; Takahashi, Daisuke; Otaka, Akira

    2015-02-01

    Bridged peptides including stapled peptides are attractive tools for regulating protein-protein interactions (PPIs). An effective synthetic methodology in a heterogeneous system for the preparation of these peptides using olefin metathesis and hydrogenation of protected peptides with a long aliphatic chain anchor is reported.

  5. Metalloradical-Catalyzed Selective 1,2-Rh-H Insertion into the Aliphatic Carbon-Carbon Bond of Cyclooctane

    NARCIS (Netherlands)

    Y.W. Chan; B. de Bruin; K.S. Chan

    2015-01-01

    The selective aliphatic carboncarbon activation of cyclo-octane (c-octane) was achieved via the Rh-II(ttp)-catalyzed 1,2-addition of Rh(ttp)H to give Rh(ttp)(n-octyl) (ttp = tetratolylporphyrinato dianion) in good yield under mild reaction conditions. This mechanism is further supported by DFT calcu

  6. Structural characterisation of aliphatic, non-hydrolyzable biopolymers in freshwater algae and a leaf cuticle by ruthenium tetroxide degradation

    NARCIS (Netherlands)

    Sinninghe Damsté, J.S.; Schouten, S.; Moerkerken, P.; Gelin, F.; Baas, M.; Leeuw, J.W. de

    1998-01-01

    Aliphatic, non-hydrolyzable biopolymers were subjected to RuO4-oxidation in order to examine the potential of this method in revealing details on their structures. The method was tested on model compounds first and found to cleave alkyl chains of aromatic moieties, double bonds and ether bonds. Oxid

  7. Intramolecular Acylation of Aryl- and Aroyl-Aliphatic Acids by the Action of Pyrophosphoryl Chloride and Phosphorus Oxychloride

    Directory of Open Access Journals (Sweden)

    Saleh Rayyan

    2001-03-01

    Full Text Available Both pyrophosphoryl chloride and phosphorus oxychloride react with aryl aliphatic acids to form mixed anhydrides which undergo intramolecular acylation to afford cyclic ketones without the addition of a Friedel-Crafts catalyst. Aryl and aroylbenzoic acids could be cyclized to the corresponding anthrones and anthraquinones respectively.

  8. STUDIES ON MISCIBILITY OF POLY (ε-CAPROLACTONE) AND ALIPHATIC POLYCARBONATE BLENDS AND DETERMINATION OF THEIR INTERACTION PARAMETER

    Institute of Scientific and Technical Information of China (English)

    CHEN Li; HUANG Yuhui; SONG Mo; CONG Guangmin

    1992-01-01

    In this paper the miscibility of poly (ε-caprolactone) (PCL) and aliphatic polycarbonate (AP C) is studied by using DSC. The results show that PCL and APC are miscible in all ranges of composition. The interaction parameter between the polymers is calculated from the melting point depression data. Using optical microscope, the shapes of the PCL spherulites in the blends are observed.

  9. Ru/Me-BIPAM-Catalyzed Asymmetric Addition of Arylboronic Acids to Aliphatic Aldehydes and α-Ketoesters

    Directory of Open Access Journals (Sweden)

    Momoko Watanabe

    2011-06-01

    Full Text Available A ruthenium-catalyzed asymmetric arylation of aliphatic aldehydes and α-ketoesters with arylboronic acids has been developed, giving chiral alkyl(arylmethanols and α-hydroxy esters in good yields. The use of a chiral bidentate phosphoramidite ligand (Me-BIPAM achieved excellent enantioselectivities.

  10. The impact of the absence of aliphatic glucosinolates on water transport under salt stress in Arabidopsis thaliana

    Directory of Open Access Journals (Sweden)

    Mcarmen eMartinez-Ballesta

    2015-07-01

    Full Text Available Members of the Brassicaceae are known for their contents of nutrients and health-promoting phytochemicals, including glucosinolatesExposure to salinity increases the levels of several of these compounds, but their role in abiotic stress response is unclear. The effect of aliphatic glucosinolates on plant water balance and growth under salt stress, involving aquaporins, was investigated by means of Arabidopsis thaliana mutants impaired in aliphatic glucosinolate biosynthesis, which is controlled by two transcription factors: Myb28 and Myb29. The double mutant myb28myb29, completely lacking aliphatic glucosinolates, was compared to wild type Col-0 (WT and the single mutant myb28. A greater reduction in the hydraulic conductivity of myb28myb29 was observed under salt stress, when compared to the WT and myb28; this correlated with the abundance of both PIP1 and PIP2 aquaporin subfamilies. Also, changes in root architecture in response to salinity were genotype dependent. Treatment with NaCl altered glucosinolates biosynthesis in a similar way in WT and the single mutant and differently in the double mutant. The results indicate that short-chain aliphatic glucosinolates may contribute to water saving under salt stress

  11. Preparation and characterization of protein loaded microspheres based on a hydroxylated aliphatic polyester, poly (lactic-co-hydroxymethyl glycolic acid)

    NARCIS (Netherlands)

    Ghassemi, A.H.; van Steenbergen, M.J.; Talsma, H.; van Nostrum, C.F.; Jiskoot, W.; Crommelin, D.J.A.; Hennink, W.E.

    2009-01-01

    The purpose of this study was to investigate the suitability of a novel hydroxylated aliphatic polyester, poly (lactic-co-hydroxymethyl glycolic acid) (PLHMGA), as controlled release system for pharmaceutical proteins. Dextran Blue (as a macromolecular model compound) and lysozyme-loaded PLHMGA and

  12. Analysis of aliphatic carboxylic acids in anaerobic digestion process waters by ion-exclusion chromatography

    Institute of Scientific and Technical Information of China (English)

    Kazuaki ITO; Kazuhiko TANAKA; Jun SAKAMOTO; Kazuya NAGAOKA; Yohichi TAKAYAMA; Takashi KANAHORI; Hiroshi SUNAHARA; Tsuneo HAYASHI; Shinji SATO; Takeshi HIROKAWA

    2012-01-01

    The analysis of seven aliphatic carboxylic acids ( formic,acetic,propionic,iso-butyric,n-butyric,iso-valeric and n-valeric acid) in anaerobic digestion process waters for biogas production was examined by ion-exclusion chromatography with dilute acidic eluents (benzoic acid,perfluorobutyric acid (PFBA) and sulfuric acid) and non-suppressed conductivity/ultraviolet (UV) detection.The columns used were a styrene/divinylbenzene-based strongly acidic cation-exchange resin column ( TSKgel SCX) and a polymethacrylate-based weakly acidic cation-exchange resin column ( TSKgel Super IC-A/C ).Good separation was performed on the TSKgel SCX in shorter retention times.For the TSKgel Super IC-A/C,peak shape of the acids was sharp and symmetrical in spite of longer retention times.In addition,the mutual separation of the acids was good except for iso- and n-butyric acids.The better separation and good detection was achieved by using the two columns (TSKgel SCX and TSKgel Super IC-A/C connected in series),lower concentrations of PFBA and sulfuric acid as eluents,non-suppressed conductivity detection and UV detection at 210 nm.This analysis was applied to anaerobic digestion process waters.The chromatograms with conductivity detection were relatively simpler compared with those of UV detection.The use of two columns with different selectivities for the aliphatic carboxylic acids and the two detection modes was effective for the determination and identification of the analytes in anaerobic digestion process waters containing complex matrices.

  13. Seasonal variation of aliphatic amines in marine sub-micrometer particles at the Cape Verde islands

    Directory of Open Access Journals (Sweden)

    C. Müller

    2009-07-01

    Full Text Available Monomethylamine (MA, dimethylamine (DMA and diethylamine (DEA were detected at non-negligible concentrations in sub-micrometer particles at the Cap Verde Atmospheric Observatory (CVAO located on the island of São Vicente in Cape Verde during algal blooms in 2007. The concentrations of these amines in five stage impactor samples ranged from 0 to 30 pg m−3 for MA, 130 to 360 pg m−3 for DMA and 5 to 110 pg m−3 for DEA during the spring bloom in May 2007 and 2 to 520 pg m−3 for MA, 100 to 1400 pg m−3 for DMA, 90 to 760 pg m−3 for DEA during an unexpected winter algal bloom in December 2007. Anomalously high Saharan dust deposition and intensive ocean layer deepening were found at the Atmospheric Observatory and the associated Ocean Observatory during algal bloom periods. The highest amine concentrations in fine particles (impactor stage 2, 0.14–0.42 μm indicates that amines are likely taken up from the gas phase into the acidic sub-micrometer particles. The contribution of amines to the organic carbon (OC content ranged from 0.2 to 2.5%C in the winter months, indicating the importance of this class of compounds to the carbon cycle in the marine environment. Furthermore, aliphatic amines originating from marine biological sources likely contribute significantly to the organic nitrogen in the marine atmosphere. The average contribution of the amines to the total detected nitrogen content in submicron particles can be non-negligible, especially in the winter months (0.1% N to 1.5% N in the sum of nitrate, ammonium and amines. This indicates that these smaller aliphatic amines can be important for the carbon and the nitrogen cycles in the remote marine environment.

  14. Occurrence of selected aliphatic amines in source water of major cities in China

    Institute of Scientific and Technical Information of China (English)

    Haifeng Zhang; Shuoyi Ren; Jianwei Yu; Min Yang

    2012-01-01

    The formation of toxic nitrogenous disinfection byproducts (N-DBPs),such as nitrosamines,halonitromethanes and haloacetonitriles,from reactions between chlorine/chloramine and dissolved organic nitrogen in drinking water has caused great concern with regarding public health.This study revealed the occurrence of 17 aliphatic amines,some of which have been confirmed to be the precursors of N-DBPs,in source water across China.A sensitive method based on benzenesulfonyl chloride derivatization and liquid-liquid extraction followed by GC-MS analysis was established for the simultaneous analysis of the selected amines in aqueous samples.In total,37 source water samples from the capital cities of 20 provinces were collected for the survey.Among the 17 amines,14 were detected with an average frequency of detection of 36%.The most relevant amines in terms of frequency and maximum concentrations detected were dimethylamine (100%,24.82 μg/L),methylamine (78%,0.92 μg/L),N-methylethylamine (70%,8.84 μg/L),propylamine (59%,10.69 μg/L),diethylamine (54%,3.76 μg/L),N-methylbutylamine (35%,3.07 μg/L),N-ethylpropylamine (35%,0.52 μg/L),and piperidine (32%,2.35 μg/L).This is the first large scale survey of the aliphatic amines occurrence in source water in the world.The wide presence of nitrosamine precursors like dimethylamine,N-methylethylamine and diethylamine,and the precursors of haloacetonitriles and halonitromethanes like methylamine and propylamine suggests that better source water management is required to ensure the safety of drinking water.

  15. Analysis of aliphatic waxes associated with root periderm or exodermis from eleven plant species.

    Science.gov (United States)

    Kosma, Dylan K; Rice, Adam; Pollard, Mike

    2015-09-01

    Aliphatic waxes can be found in association with suberized tissues, including roots. Non-polar lipids were isolated by rapid solvent extraction of mature regions of intact roots from eleven angiosperms, including both monocots and dicots. The majority of roots analyzed were taproots or tuberous taproots that had undergone secondary growth and thus were covered by a suberized periderm. The exceptions therein were maize (Zea mays L.) and rice (Oryza sativa L.), which present a suberized exodermis. The analysis herein focused on aliphatic waxes, with particular emphasis on alkyl hydroxycinnamates (AHCs). AHCs were widely distributed, absent from only one species, were found in both aerial and subterranean portions of tuberous taproots, and were associated with the fibrous roots of both maize and rice. Most species also contained monoacylglycerols, fatty alcohols and/or free fatty acids. Carrot (Daucus carrota L.) was the outlier, containing only free fatty acids, sterols, and polyacetylenes as identified components. Sterols were the only ubiquitous component across all roots analyzed. Monoacylglycerols of ω-hydroxy fatty acids were present in maize and rice root waxes. For species within the Brassiceae, wax compositions varied between subspecies or varieties and between aerial and subterranean portions of taproots. In addition, reduced forms of photo-oxidation products of ω-hydroxy oleate and its corresponding dicarboxylic acid (10,18-dihydroxy-octadec-8-enoate, 9,18-dihydroxy-octadec-10-enoate and 9-hydroxyoctadec-10-ene-1,18-dioate) were identified as naturally occurring suberin monomers in rutabaga (Brassica napus subsp. rapifera Metzg.) periderm tissues.

  16. Preparation of low-melting point copolyester bonding fiber from post-consumer polyester fabric by glycolysis%废旧涤纶织物醇解再生制备低熔点粘合纤维

    Institute of Scientific and Technical Information of China (English)

    钱军; 王少博; 邢喜全; 王朝生; 王方河; 王赛博; 林世东

    2016-01-01

    Polyethylene terephthalate ( PET) was recycled from post-consumer PET fabric by ethylene glycol glycolysis and was copolymerized with isophthalic acid and 1,4-butanediol as modified monomers during the chemical recycling process to produce a low-melting point copolyester ( LPET) .And a recycled low-melting point PET bonding fiber was prepared by using the recycled PET as the core and the recycled LPET as the sheath at a certain proportion via sheath -core composite spinning process prior to tensile post-processing .The results showed that the recycled PET had the similar thermal stability and the recycled LPET had the lower thermal stability than normal bright PET , giving no impact on the processing and application; the recycled LPET had the softening point of 76℃and the melting point of 125℃;the recycled low-melting point PET bonding fiber could be prepared with the linear density of 4.6 dtex, breaking strength 3.22 cN/dtex, elongation at break 48.2%, dry-hot shrinkage 5.6%, moisture regain 0.41%, perfectly satisfying the requirements of FZ/T 52010-2014 Recycled Polyester Staple Fiber , under the conditions as followed:sheath-core mass ratio 4:6, spinning temperature 280 ℃, quenching temperature 22 ℃, quenching speed 1.2 m/s,spinning speed 1 100 m/min, drawing bath temperature 60-65 ℃, draw ratio 2.9.%以废旧涤纶织物为原料,采用乙二醇醇解法对废旧涤纶织物进行化学再生,制得再生聚对苯二甲酸乙二醇酯(PET);在化学再生过程中以间苯二甲酸,1,4-丁二醇为改性单体进行共聚,制得再生低熔点共聚酯( LPET);采用皮芯复合纺丝工艺将再生LPET(皮)与再生PET(芯)按一定复合比例进行纺丝并进行拉伸后处理,制得再生低熔点PET粘合纤维。结果表明:与常规大有光PET比较,再生PET的热稳定性与之相近,再生LPET的热稳定性稍差,但不影响其加工应用;再生LPET的软化温度为76℃,熔融温度为125

  17. Aromatic Thermosetting Copolyesters for Ablative TPS Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Better performing ablative thermal protection systems than currently available are needed to satisfy requirements of the most severe crew exploration vehicles, such...

  18. Application of Topology Index in Aliphatic Aldehydes,Fatty Amines and Aliphatic Hydrocarbons Boiling Point%拓扑指数在脂肪醛、脂肪胺及脂肪烃沸点中的应用

    Institute of Scientific and Technical Information of China (English)

    周长会; 吴启勋; 侯庆高; 高宴梓; 李洪囡; 张瑞

    2013-01-01

    Two matrices and a topological index W were defined,then,topological index W was put into nonlinear regression with the boiling point of aliphatic aldehydes, fatty amines and aliphatic hydrocarbons, respectively, and with good results,the correlation coefficient reaches a good level. The established topological index and two kinds of matrix are easy and convenient to use, which can quickly predict the boiling point of the molecule.%定义了两种矩阵和一种拓扑指数W,将拓扑指数W分别与脂肪醛、脂肪胺及脂肪烃的沸点进行非线性回归,取得了较好的结果,相关性系数达到了良好级别.建立的拓扑指数和两种矩阵简洁方便,可以快速预测分子的沸点.

  19. Different aliphatic dicarboxylates affected assemble of new coordination polymers constructed from flexible-rigid mixed ligands

    International Nuclear Information System (INIS)

    In this article, seven coordination polymers: [Cd(C5H6O4)(C10H8N2)]n (1), [Zn(C5H6O4)(C10H8N2)]n (2), [Cd(C6H8O4)(C10H8N2)]n (3), {[Mn(C10H8N2)(H2O)4] (C4H4O4).4H2O}n (4), [Mn5(C4H4O4)4(O)]n (5), [Cd(C4H4O4)(C10H8N2)(H2O)]n (6) and [Zn(C6H6O4)(C12H8N2)(H2O)]n (7) were synthesized and characterized by single-crystallographic X-ray diffraction. Compounds 1 and 2 are two-dimensional layers connected by glutarate anions and 4,4'-bpy. Unlike compounds 1 and 2, compound 3 is a two-fold interpenetration network. Compound 4 is a one-dimensional chain-like structure, which is further extended to two-dimensional supramolecular layer structure with hydrogen bond. During the synthesis of compound 4, to our surprise, we got compound 5; compound 5 is an interesting three-dimensional network composed of pentanuclear Mn(II) building units and succinate anions. Compound 6 is also a two-dimensional supramolecular layer structure composed of one-dimensional chain-like structure with hydrogen bonds and Π-Π interactions. Compound 7 is also a one-dimensional chain-like structure, which is further connected with the same kind of interaction to generate two-dimensional supramolecular layer structure. Furthermore, compounds 1 and 2 both exhibit fluorescent property at room temperature. - Graphical abstract: Seven complexes composed by 3D metal ions, aliphatic acid ligand and rigid bidentate nitrogen ligands: 4,4'-bpy, 2,2'-bpy and 1,10'-phen. With the change of the carbon number of the backbone of aliphatic dicarboxylate ligand, we can synthesize different complexes with various structures

  20. Seasonal variation of aliphatic amines in marine sub-micrometer particles at the Cape Verde islands

    Directory of Open Access Journals (Sweden)

    H. Herrmann

    2009-12-01

    Full Text Available Monomethylamine (MA, dimethylamine (DMA and diethylamine (DEA were detected at non-negligible concentrations in sub-micrometer particles at the Cap Verde Atmospheric Observatory (CVAO located on the island of São Vicente in Cape Verde during algal blooms in 2007. The concentrations of these amines in five stage impactor samples ranged from 0–30 pg m−3 for MA, 130–360 pg m−3 for DMA and 5–110 pg m−3 for DEA during the spring bloom in May 2007 and 2–520 pg m−3 for MA, 100–1400 pg m−3 for DMA and 90–760 pg m−3 for DEA during an unexpected winter algal bloom in December 2007. Anomalously high Saharan dust deposition and intensive ocean layer deepening were found at the Atmospheric Observatory and the associated Ocean Observatory during algal bloom periods. The highest amine concentrations in fine particles (impactor stage 2, 0.14–0.42 μm indicate that amines are likely taken up from the gas phase into the acidic sub-micrometer particles. The contribution of amines to the organic carbon (OC content ranged from 0.2–2.5% C in the winter months, indicating the importance of this class of compounds to the carbon cycle in the marine environment. Furthermore, aliphatic amines originating from marine biological sources likely contribute significantly to the nitrogen content in the marine atmosphere. The average contribution of the amines to the detected nitrogen species in sub-micrometer particles can be non-negligible, especially in the winter months (0.1% N–1.5% N in the sum of nitrate, ammonium and amines. This indicates that these smaller aliphatic amines can be important for the carbon and the nitrogen cycles in the remote marine environment.

  1. Green Aza-Michael Reaction of Aliphatic Amines to á,(a)-Unsaturated Compounds in Water

    Institute of Scientific and Technical Information of China (English)

    XU Li-Wen; XIA Chun-Gu

    2004-01-01

    The hydroamination of olefins is a long-standing goal for transition metal catalysis. And the metal-catalyzed addition of amines to carbon-carbon double bonds is an unsolved, synthetically important problem. Although recent advances have made using lanthanide and precious metal complexes, there are few excellent catalyst that display broad functional group tolerance and useful rates for an intermolecular aza-Michael addition. As such, the development of efficient synthetic methods leading to a-amino carbonyl compounds and derivatives has attracted much attention in organic synthesis. Although recent advances have made this route more attractive, development of cheaper, simpler, and more efficient metal catalyst is highly desirable. We also have been interested in developing a reaction that uses catalytic quantities of minimally toxic, readily available, economic reagent should greatly contribute to the creation of environmental benign processes.The recent interest in aqueous medium metal-mediated carbon-carbon and carbon-heteroatom and formations led to the contributors for such reactions. Furthermore, development of organic reactions in water will contribute to the progress of green and quasi-nature catalysis chemistry. Surprisingly however, there is few report on conjugate additions of amines to a,a-unsaturated carbonyl compounds in water.Herein, we report a new protocol that employs air stable copper salts as efficient catalyst in the aza-Michael reaction under mild reaction conditions. Advantages of the protocol include high-yielding reactions that can be conducted at ambient temperature; the use of readily available and stable copper salts as the catalyst, and the reaction was successfully performed in environmental benign solvent, water.Finally, we have utilized a variety of aliphatic amines successfully with different á,(a)-unsaturated compounds catalyzed by simple hydrophilic ionic liquid, bmimBF4 in water. Interestingly, all the aliphatic amines gave

  2. Studies of the physical, yield and failure behavior of aliphatic polyketones

    Science.gov (United States)

    Karttunen, Nicole Renee

    This thesis describes an investigation into the multiaxial yield and failure behavior of an aliphatic polyketone terpolymer. The behavior is studied as a function of: stress state, strain rate, temperature, and sample processing conditions. Results of this work include: elucidation of the behavior of a recently commercialized polymer, increased understanding of the effects listed above, insight into the effects of processing conditions on the morphology of the polyketone, and a description of yield strength of this material as a function of stress state, temperature, and strain rate. The first portion of work focuses on the behavior of a set of samples that are extruded under "common" processing conditions. Following this reference set of tests, the effect of testing this material at different temperatures is studied. A total of four different temperatures are examined. In addition, the effect of altering strain rate is examined. Testing is performed under pseudo-strain rate control at constant nominal octahedral shear strain rate for each failure envelope. A total of three different rates are studied. An extension of the first portion of work involves modeling the yield envelope. This is done by combining two approaches: continuum level and molecular level. The use of both methods allows the description of the yield envelope as a function of stress state, strain rate and temperature. The second portion of work involves the effects of processing conditions. For this work, additional samples are extruded with different shear and thermal histories than the "standard" material. One set of samples is processed with shear rates higher and lower than the standard. A second set is processed at higher and lower cooling rates than the standard. In order to understand the structural cause for changes in behavior with processing conditions, morphological characterization is performed on these samples. In particular, the effect on spherulitic structure is important. Residual

  3. Optically nonlinear Langmuir Blodgett films

    CERN Document Server

    Amiri, M A

    2003-01-01

    A series of novel amphiphilic molecules plus a new class of chevron-shaped materials, without aliphatic tails, were designed, synthesised and non-centrosymmetrically aligned by the Langmuir-Blodgett technique. Their LB films exhibited optical second-harmonic generation (SHG). The chevron-shaped molecules have a central cationic acceptor and two pi-bridged donor groups with an angle of ca. 120 deg between the charge-transfer axes of the D-pi-(A sup +)-pi-D unit. A monolayer LB film of a representative example, 1-butyl-2,6-bis[2- (4-dibutylaminophenyl)vinyl]pyridinium iodide, has an effective susceptibility, chi sup ( sup 2 sup ) sub e sub f sub f , of 120 pm V sup - sup 1 at 1064 nm, a thickness of 1.16 nm and an area in contact with the substrate of 0.91 nm sup 2 molecule sup - sup 1. The second-harmonic intensity (1.6 x 10 sup - sup 4 versus quartz) is similar to those of the extensively studied conventional amphiphilic hemicyanines but as a result of non-centrosymmetric alignment, without the need for long ...

  4. Syntheses of Enantiopure Aliphatic Secondary Alcohols and Acetates by Bioresolution with Lipase B from Candida antarctica

    Directory of Open Access Journals (Sweden)

    Richele P. Severino

    2012-07-01

    Full Text Available The lipase B from Candida antarctica (Novozym 435®, CALB efficiently catalyzed the kinetic resolution of some aliphatic secondary alcohols: (±-4-methylpentan-2-ol (1, (±-5-methylhexan-2-ol (3, (±-octan-2-ol (4, (±-heptan-3-ol (5 and (±-oct-1-en-3-ol (6. The lipase showed excellent enantioselectivities in the transesterifications of racemic aliphatic secondary alcohols producing the enantiopure alcohols (>99% ee and acetates (>99% ee with good yields. Kinetic resolution of rac-alcohols was successfully achieved with CALB lipase using simple conditions, vinyl acetate as acylating agent, and hexane as non-polar solvent.

  5. Thermotropic liquid crystalline polyesters derived from bis-(4-hydroxybenzoyloxy)-2-methyl-1,4-benzene and aliphatic dicarboxylic acid chlorides

    Indian Academy of Sciences (India)

    Khudbudin Mulani; Mohasin Momin; Nitin Ganjave; Nayaku Chavan

    2015-09-01

    A series of thermotropic liquid crystalline polyesters derived from bis-(4-hydroxybenzoyloxy)-2-methyl-1,4-benzene (BHBOMB) and aliphatic dicarboxylic acid chlorides were investigated. All these polyesters were synthesized by interfacial polycondensation method and characterized by differential scanning calorimetry and wide-angle X-ray diffractometer. These polyesters consist of BHBOMB as a mesogenic diol and aliphatic diacid chlorides were used as flexible spacers. The length of oligomethylene units in polymer was varied from the trimethylene to the dodecamethylene groups. The transition temperatures and thermodynamic properties were studied for all these polymers. All these polyesters were soluble in chlorinated solvents such as chloroform, dichloromethane, dichloroethane, etc. More importantly, all these polyesters exhibited very large mesophase stability.

  6. One- and two-dimensional divalent copper coordination polymers based on kinked organodiimine and long flexible aliphatic dicarboxylate ligands

    Science.gov (United States)

    Mallika Krishnan, Subhashree; Supkowski, Ronald M.; LaDuca, Robert L.

    2008-11-01

    Hydrothermal synthesis under acidic conditions has afforded a pair of divalent copper coordination polymers containing the kinked dipodal tethering organodiimine 4,4'-dipyridylamine (dpa) and flexible long-chain aliphatic dicarboxylate ligands. The new materials were characterized by single crystal X-ray structure determination, infrared spectroscopy, and thermogravimetric analysis. [CuCl(suberate) 0.5(dpa)] ( 1) manifests 1-D ladder-like motifs aggregated into 3-D through hydrogen bonding and copper-mediated supramolecular interactions. Extension of the aliphatic chain within the dicarboxylate ligand by one methylene unit resulted in {[Cu(azelate)(dpa)(H 2O)] · 3H 2O} ( 2), a (4,4) rhomboid grid 2-D coordination polymer encapsulating acyclic water molecule trimers.

  7. Secondary organic aerosol formation from primary aliphatic amines with NO3 radical

    Directory of Open Access Journals (Sweden)

    M. E. Erupe

    2008-07-01

    Full Text Available Primary aliphatic amines are an important class of nitrogen containing compounds found to be emitted from automobiles, waste treatment facilities and agricultural animal operations. A series of experiments conducted at the UC-Riverside/CE-CERT Environmental Chamber is presented in which oxidation of methylamine, ethylamine, propylamine, and butylamine with NO3 has been investigated. Very little aerosol formation is observed in the presence of O3 only. However, after addition of NO, and by extension NO3, large yields of aerosol mass loadings (~44% for butylamine are seen. Aerosol generated was determined to be organic in nature due to the small fraction of NO and NO2 in the total signal (<17% for all amines tested as detected by an aerosol mass spectrometer (AMS. We propose a reaction mechanism between carbonyl containing species and the parent amine leading to formation of particulate imine products. These findings can have significant impacts on rural communities and lead to elevated nighttime PM loadings, when significant levels on NO3 exist.

  8. Synthesis of Carbon Nanotubes of Few Walls Using Aliphatic Alcohols as a Carbon Source

    Directory of Open Access Journals (Sweden)

    Francisco Espinosa-Magaña

    2013-06-01

    Full Text Available Carbon nanotubes with single and few walls are highly appreciated for their technological applications, regardless of the limited availability due to their high production cost. In this paper we present an alternative process that can lead to lowering the manufacturing cost of CNTs of only few walls by means of the use of the spray pyrolysis technique. For this purpose, ferrocene is utilized as a catalyst and aliphatic alcohols (methanol, ethanol, propanol or butanol as the carbon source. The characterization of CNTs was performed by scanning electron microscopy (SEM and transmission electron microscopy (TEM. The study of the synthesized carbon nanotubes (CNTs show important differences in the number of layers that constitute the nanotubes, the diameter length, the quantity and the quality as a function of the number of carbons employed in the alcohol. The main interest of this study is to give the basis of an efficient synthesis process to produce CNTs of few walls for applications where small diameter is required.

  9. Aliphatic ketones from Ruta chalepensis (Rutaceae) induce paralysis on root knot nematodes.

    Science.gov (United States)

    Ntalli, Nikoletta G; Manconi, Francesca; Leonti, Marco; Maxia, Andrea; Caboni, Pierluigi

    2011-07-13

    This paper reports on the use of Ruta chalepensis L. extracts as a potential nematicide against root knot nematodes Meloidogyne incognita and Meloidogyne javanica . The essential oil (REO) and methanol extract (RME) of R. chalepensis were tested against second-stage juveniles, with REO inducing paralysis in both species (EC(50/1d) = 77.5 and 107.3 mg/L) and RME being selective for M. incognita (EC(50/1d) = 1001 mg/L). Chemical characterization of extracts was done by means of GC-MS and LC-MS, revealing mainly aliphatic ketones and coumarins, respectively. The first-ranking volatile nematicidal component in terms of individual activity against both species was 2-undecanone (EC(50) = 20.6 and 22.5 mg/L for M. incognita and M. javanica, respectively). This fact together with its high concentration in the most active extract found in this study, namely, REO (2926 mg/kg), categorizes 2-undecanone among the nematicidal principles of R. chalepensis. On the contrary, coumarins rutin and 8-methoxypsoralen were not found to be nematicidal at concentrations of ≤500 mg/L. Interestingly, M. incognita was found more sensitive than M. javanica.

  10. Sum frequency generation image reconstruction: aliphatic membrane under spherical cap geometry.

    Science.gov (United States)

    Volkov, Victor

    2014-10-01

    The article explores an opportunity to approach structural properties of phospholipid membranes using Sum Frequency Generation microscopy. To establish the principles of sum frequency generation image reconstruction in such systems, at first approach, we may adopt an idealistic spherical cap uniform assembly of hydrocarbon molecules. Quantum mechanical studies for decanoic acid (used here as a representative molecular system) provide necessary information on transition dipole moments and Raman tensors of the normal modes specific to methyl terminal - a typical moiety in aliphatic (and phospholipid) membranes. Relative degree of localization and frequencies of the normal modes of methyl terminals make nonlinearities of this moiety to be promising in structural analysis using Sum Frequency Generation imaging. Accordingly, the article describes derivations of relevant macroscopic nonlinearities and suggests a mapping procedure to translate amplitudes of the nonlinearities onto microscopy image plane according to geometry of spherical assembly, local molecular orientation, and optical geometry. Reconstructed images indicate a possibility to extract local curvature of bilayer envelopes of spherical character. This may have practical implications for structural extractions in membrane systems of practical relevance. PMID:25296798

  11. Sum frequency generation image reconstruction: Aliphatic membrane under spherical cap geometry

    Energy Technology Data Exchange (ETDEWEB)

    Volkov, Victor [Bereozovaya 2A, Konstantinovo, Moscow Region 140207 (Russian Federation)

    2014-10-07

    The article explores an opportunity to approach structural properties of phospholipid membranes using Sum Frequency Generation microscopy. To establish the principles of sum frequency generation image reconstruction in such systems, at first approach, we may adopt an idealistic spherical cap uniform assembly of hydrocarbon molecules. Quantum mechanical studies for decanoic acid (used here as a representative molecular system) provide necessary information on transition dipole moments and Raman tensors of the normal modes specific to methyl terminal – a typical moiety in aliphatic (and phospholipid) membranes. Relative degree of localization and frequencies of the normal modes of methyl terminals make nonlinearities of this moiety to be promising in structural analysis using Sum Frequency Generation imaging. Accordingly, the article describes derivations of relevant macroscopic nonlinearities and suggests a mapping procedure to translate amplitudes of the nonlinearities onto microscopy image plane according to geometry of spherical assembly, local molecular orientation, and optical geometry. Reconstructed images indicate a possibility to extract local curvature of bilayer envelopes of spherical character. This may have practical implications for structural extractions in membrane systems of practical relevance.

  12. Comparison of decomposition characteristics between aromatic and aliphatic VOCs using electron beam

    International Nuclear Information System (INIS)

    The removal efficiency of n-decane (C10H22) by electron beam was the highest among aliphatic VOCs of concern, and that of n-hexane (C6H14), n-butane (C4H10), and methane (CH4) followed. On the other hand, in terms of aromatic VOC decomposition efficiencies, benzene (C6H6) decomposition was the lowest and that of toluene (C7H8), ethylbenzene (C8H10), and p-xylene (C8H10) were similar. It was also found that there was increase in by-product (untreated VOC, CO, CO2, O3, and other compounds) formation as well as all VOC removal efficiencies. It was demonstrated that the removal efficiency of VOC increased as its concentration decreased and the irradiation dose increased. In addition, low removal efficiency was observed because helium was relatively stable compared to the other gases, and nothing but electrons produced by electron accelerator reacted with VOC. It was also found that relative humidity had some effects on the decomposition rates of VOC. The removal efficiency at the 100% RH condition was slightly higher than that at 7.4% RH (dry condition) due to OH radical formation. (author)

  13. A Novel Guided Bone Regeneration Membrane Composed of Nano-hydroxyapatite and Aliphatic Polyester-amide

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Hydrothermally synthesized nano-hydroxyapatite ( n-HA ) varing in weight from 10% to 30%was used as filler to make guided bone regeneration (GBR) composite membranes with novel aliphatic polyesteramide (PEA). The structure and properties of PEA and its n- HA composites were investigated through TEM, IR,XRD , SEM and EDX. The shape and size of the n-HA crystals are similar to the apatite crystals in natural bone.Molecule interactions are present between the n- HA and PEA in the composite, which allows the uniform dispersion of n- HA in PEA matrix. This contributes enhanced mechanical property and bioactivity to the composite. The cytocompatibility of the composites has been investigated by culturing osteoblasts on the membranes. Good cell attachment and proliferation manner were observed on the membranes after 1 week. These results suggest that the PEA/n- HA composite membrane prepared in this study may serve as barrier membranes for guided bone regeneration and potential candidate scaffold for tissue engineering.

  14. Secondary organic aerosol formation from primary aliphatic amines with NO3 radical

    Directory of Open Access Journals (Sweden)

    P. J. Silva

    2009-03-01

    Full Text Available Primary aliphatic amines are an important class of nitrogen containing compounds emitted from automobiles, waste treatment facilities and agricultural animal operations. A series of experiments conducted at the UC-Riverside/CE-CERT Environmental Chamber is presented in which oxidation of methylamine, ethylamine, propylamine, and butylamine with O3 and NO3 have been investigated. Very little aerosol formation is observed in the presence of O3 only. However, after addition of NO, and by extension NO3, large aerosol mass yields (~44% for butylamine are seen. Aerosol generated was determined to be organic in nature due to the small fraction of NO and NO2 in the total signal (<1% for all amines tested as detected by an aerosol mass spectrometer (AMS. We propose a reaction mechanism between carbonyl containing species and the parent amine leading to formation of particulate imine products. These findings can have significant impacts on rural communities with elevated nighttime PM loadings, when significant levels of NO3 exist.

  15. Solid, double-metal cyanide catalysts for synthesis of hyperbranched polyesters and aliphatic polycarbonates

    Indian Academy of Sciences (India)

    Joby Sebastian; Srinivas Darbha

    2014-03-01

    Fe-Zn and Co-Zn double-metal cyanide (DMC) complexes exhibit highly efficient and selective catalytic activity for synthesis of hyperbranched polyesters (glycerol-succinic acid (G-SA) and glycerol-adipic acid (G-AA)) and aliphatic polycarbonates (via., alternative co-polymerization of cyclohexene oxide and CO2), respectively. The influence of method of preparation of DMC, in particular the mode of addition of reagents, on its physicochemical and catalytic properties was investigated. Co-Zn DMC was found highly selective for polycarbonate (than polyethers) formation. Catalysts prepared using tert-butanol and PEG-4000 as complexing and co-complexing agents, respectively, were found superior to those prepared without these agents. Apart from its role as a coordinating ligand, tert-butanol activated the Lewis acidic Zn2+ sites for reactions in polyester and polycarbonate formation. Hydrophobicity, micro-mesoporosity, acid strength and the amount of coordinated complexing agent are some of the crucial factors influenced the catalytic activity of DMC complexes.

  16. {Polycyclic aromatic hydrocarbons (PAHs) and aliphatic hydrocarbons in gas and particle phases in two sites of Mexico: MILAGRO project}

    Science.gov (United States)

    Amador-Muñoz, O.; Villalobos-Pietrini, R.; Castro, T.; Gaspariano-Larino, R.

    2009-04-01

    Aliphatic hydrocarbons are markers of anthropogenic and biogenic emission sources1; meanwhile PAHs are generated by incomplete combustion sources2. The last ones are important compounds due to their carcinogenic and mutagenic properties3,4. The aim of this study was to identify and quantify aliphatic hydrocarbons and PAHs in gas and particles phases of the atmospheric aerosol and to determine the day and night time behavior during the MILAGRO (Megacity Initiative: Local Global and Research Observations) campaign. The gas phase was collected on polyurethane foam, while particles less than 2.5 m (PM2.5) were collected on glass fiber filters covered with Teflon (TIGF, pallflex) of 8x10 in. Samplings were carried out with a high volume sampler (Tisch) with a flow of 1.13 m3 min-1 at two sites: Instituto Mexicano del Petróleo (T0) and Tecamac (T1) located at North and Northeast of Mexico City, respectively during day (7:00 am-7:00 pm) and night time (7:00 pm-7:00 am) from 1 to 29 of March, 2006. Ninteen PAHs and 23 aliphatic hydrocarbons from n-C13H28 to n-C35H72 were analyzed by gas chromatography coupled to mass spectrometry in impact mode. The samples were spiked with deuterads PAHs and aliphatics hydrocarbons before ultrasound extraction. Medians comparisons were made with Mann-Whitney U test. PAHs with molecular weight (MW) less than 228 g mol-1 were distributed in the gas phase, in both sites. Higher concentrations of PAHs ≥ 228 g mol-1 in PM2.5, were observed during night period (p

  17. Composition and sources of aliphatic lipids and sterols in sediments of a tropical island, southern South China Sea: preliminary assessment.

    Science.gov (United States)

    Mohd Tahir, N; Pang, S Y; Abdullah, N A; Suratman, S

    2013-12-01

    Near-shore surface sediment was collected from five stations off Redang Island located on the eastern coast of Peninsular Malaysia. Freeze-dried sediments were Soxhlet extracted and then fractionated using column chromatography into aliphatic and polar fractions. Determination of these fractions was carried out using gas chromatography mass spectrometry. The concentration of total resolved aliphatic hydrocarbons in sediments ranged from 157 to 308 ng/g. The distribution of aliphatic fraction showed the presence of n-alkanes ranging from nC15 to nC33 with a minor odd-to-even predominance exhibiting carbon maximum, depending on station, at nC17, nC26, nC29 or nC31. Calculation of Carbon Preference Index (CPI) for CPI(15-33) gave values ranging from 1.09 to 1.46. n-Alkanol in all sediment exhibits even-to-odd carbon predominance ranging from nC16 to nC28 and maximising at nC22. n-Fatty acids distribution ranged from nC14 to nC24 with a dominant maximum at nC16 and exhibiting high values of short chain fatty acids (≤nC20) to long chain fatty acids (>nC20) ratios. Unsaturated fatty acids, particularly nC16:1 and nC18:1 is also ubiquitous in all samples. Cholesterol is the most abundant compound amongst the sterol group ranging from 42.8 to 62.6% of the total sterols. β-Sitosterol, brassicasterol and stigmasterol, are also present but of relatively lower amount. These observations suggest that the aliphatic lipids and sterols in the study area originate, mainly, from biogenic sources of marine microbial with minor contribution from epiticular waxes of terrestrial plants.

  18. Synthesis and properties of novel aliphatic polycarbonate from carbon dioxide with 1,2-butylene oxide and ε-caprolactone

    Institute of Scientific and Technical Information of China (English)

    Yan Fei Liu; Ke Long Huang; Dong Ming Peng; Su Qin Liu; Hong Wu

    2007-01-01

    A new degradable aliphatic poly(butylene-co-ε-caprolactone carbonate) (PBCL) was synthesized through the terpolymerization of carbon dioxide, 1,2-butylene oxide (BO) and ε-caprolactone (CL), a polymer supported bimetallic complex (PBM) was used as a catalyst. The terpolymers prepared were characterized by FT-IR, 1H NMR, 13C NMR, WXRD and DSC. The hydrolysis tests were carried out to appraise the degradability of the copolymers.

  19. Analysis of. gamma. -radiolysis products of aqueous solutions of esters of aliphatic amino acids by the PMR method

    Energy Technology Data Exchange (ETDEWEB)

    Panin, V.I.; Sidorov, P.S.; Usatyi, A.F.

    1987-09-01

    The ..gamma..-radiolysis of aqueous solutions of methyl esters of aliphatic amino acids and peptides was investigated by the method of nuclear (proton) magnetic resonance (PMR). The resonance lines appearing in the PMR spectra of the irradiated systems were identified, and a conclusion was drawn about the molecular structure of the radiolysis products. The kinetics of the accumulation of radiolysis products was studied, and the values of their radiation yields were estimated.

  20. In-situ micro-FTIR Study of Thermal Changes of Organics in Tagish Lake Meteorite: Behavior of Aliphatic Oxygenated Functions and Effects of Minerals

    Science.gov (United States)

    Kebukawa, Yoko; Nakashima, Satoru; Nakamura-Messenger, Keiko; Zolensky, Michael E.

    2007-01-01

    Systematic in-situ FTIR heating experiments of Tagish Lake meteorite grains have been performed in order to study thermal stability of chondritic organics. Some aliphatic model organic substances have also been used to elucidate effects of hydrous phyllosilicate minerals on the thermal stability of organics. The experimental results indicated that organic matter in the Tagish Lake meteorite might contain oxygenated aliphatic hydrocarbons which are thermally stable carbonyls such as ester and/or C=O in ring compounds. The presence of hydrous phyllosilicate minerals has a pronounced effect on the increase of the thermal stability of aliphatic and oxygenated functions. These oxygenated aliphatic organics in Tagish Lake can be formed during the aqueous alteration in the parent body and the formation temperature condition might be less than 200 C, based especially on the thermal stability of C-O components. The hydrous phyllosilicates might provide sites for organic globule formation and protected some organic decomposition

  1. Distribution and sources of aliphatic hydrocarbons and fatty acids in surface sediments of a tropical estuary south west coast of India (Cochin estuary)

    Digital Repository Service at National Institute of Oceanography (India)

    Gireeshkumar, T.R.; Deepulal, P.M.; Chandramohanakumar, N.

    Surface sediments samples from the Cochin estuary were measured for elemental, stable isotopic and molecular biomarkers (aliphatic hydrocarbons and fatty acids) to study the sources and distribution of sedimentary organic matter. Concentrations...

  2. Aliphatic acid-conjugated antimicrobial peptides--potential agents with anti-tumor, multidrug resistance-reversing activity and enhanced stability.

    Science.gov (United States)

    Deng, Xin; Qiu, Qianqian; Ma, Ke; Wang, Xuekun; Huang, Wenlong; Qian, Hai

    2015-07-28

    Compared with traditional therapeutics, antimicrobial peptides as novel anti-tumor agents have prominent advantages of higher specificity and circumvention of multi-drug resistance. In a previous study, we found that B1, an antimicrobial peptide derived from Cathelicidin-BF15, presented specific anti-tumor activity against several tumor cells. Since aliphatic chain-conjugated peptides have shown ameliorative activity and stability, we conjugated aliphatic acids with different lengths to the amino terminal of B1. All the conjugated peptides exhibited improved anti-tumor activity over B1. Further investigations revealed that the peptides were capable of disrupting the cell membrane, stimulating cytochrome c release into the cytosol, which results in apoptosis. The peptides also acted against multidrug resistant cells and had multidrug resistance-reversing effects. Additionally, conjugation of aliphatic acid enhanced the peptide stability in plasma. In summary, aliphatic acid-modified peptides might be promising anti-tumor agents in the future. PMID:26083110

  3. Segregation and Alteration of Phenolic and Aliphatic Components of Root and Leaf Litter by Detritivores and Microbes

    Science.gov (United States)

    Filley, T. R.; Altmann, J.; Szlavecz, K. A.; Kalbitz, K.; Gamblin, D.; Nierop, K.

    2012-12-01

    The physical and microbial transformation of plant detritus in the litter layer and soil is accompanied by chemical separation of progressively soluble fractions and their movement into the rhizosphere driving subsequent soil processes. We investigated the combined action of specific detritivores, microbial decay, and leaching on the chemical separation of plant aromatic and aliphatic components from root, wood, and leaf tissue using 13C-TMAH thermochemolysis. This method enabled the simultaneous analysis of hydrolyzable tannin and lignin fragments, substituted fatty acids, and condensed tannin composition and revealed process-specific chemical transformations to plant secondary compounds. Long-term incubation and field sampling demonstrated how plant residues are progressively leached of the water soluble, oxidized fragments generated through decay. The residues appeared only slightly altered, in the case of brown rot wood, or enriched in aliphatic fragments, in the case of leaf and root tissue. Water extractable fractions were always selectively dominated by polyphenolics, either as demethylated lignin or tannins, and nearly devoid of aliphatic materials, despite high concentrations in the starting materials. Additionally, for plant materials with high tannin contents, such as pine needles, consumption and passage through some arthropod guts revealed what appeared to be microbially-mediated methylation of phenols, and a loss of tannins in leachates. These findings are indications for an in-situ phenol detoxification mechanism. This research provides important information regarding the links between biochemical decay and the chemical nature of organic matter removed and remaining in the soil profile.

  4. Langmuir-Blodgett films - From micron to angstrom

    Science.gov (United States)

    Bourdieu, L.; Silberzan, P.; Chatenay, D.

    1991-10-01

    Combining optical microscopy and atomic force microscopy, a complete characterization of Langmuir-Blodgett bilayers made of arachidic acid has been performed. At macroscopic scales, both techniques can be used to control the homogeneity of the transferred films. By atomic force microscopy, roughness and thickness of the bilayers could be determined. These are compatible with a normal orientation of the fully extended aliphatic chains with respect to the substrate. Molecular-resolution images give the first direct experimental evidence for the presence of pairs of dislocations in those systems.

  5. The Cer-cqu gene cluster determines three key players in a β-diketone synthase polyketide pathway synthesizing aliphatics in epicuticular waxes

    DEFF Research Database (Denmark)

    Schneider, Lizette Marais; Adamski, Nikolai M.; Christensen, Caspar Elo;

    2016-01-01

    Aliphatic compounds on plant surfaces, called epicuticular waxes, are the first line of defense against pathogens and pests, contribute to reducing water loss and determine other important phenotypes. Aliphatics can form crystals affecting light refraction, resulting in a color change and allowing...... affect overall protein structure or specific active site residues. The rich diversity of identified mutations will facilitate future studies of three key enzymes involved in synthesis of plant apoplast waxes....

  6. Waterborne polyurethane single-ion electrolyte from aliphatic diisocyanate and various molecular length of polyethylene glycol

    Directory of Open Access Journals (Sweden)

    2007-03-01

    Full Text Available The waterborne polyurethane (WPU dispersions from the reaction of cycloaliphatic diisocyanates [4,4’-methylenebis(cyclohexyl isocyanate (H12MDI and isophorone diisocyanate (IPDI] and polyethylene glycol (PEG with various molecular lengths were synthesized using our modified acetone process. Differetial scanning calorimeter (DSC and Fourier transform infrared spectroscopy (FTIR were utilized to characterize WPU films for the behavior of their crystallinity and H-bonding of WPU films. The Tg value of WPU increases with increasing the molecular length of PEG, whereas the Tm of WPU decreases with increasing PEG length. Alternating current (AC impedance experiments were performed to determine the ionic conductivities of WPU films. The WPU gel electrolytes exhibits an ionic conductivity as high as ~ 10-5 S/cm at room temperature.

  7. Reactions of B/sub 12r/ with aliphatic free radicals: a pulse-radiolysis study

    International Nuclear Information System (INIS)

    The spectra of the intermediates formed in the reactions of B/sub 12r/ with the free radicals Br2-., CO2-., .CH2C(CH3)2OH, .C(CH3)2OH, . CH2CHO, and .CH(OH)CH2OH are reported. The results indicate that Br2-. oxidizes B/sub 12r/ to B/sub 12a/, via an inner-sphere mechanism, and CO2- . reduces B/sub 12r/ to B/sub 12s/. All the aliphatic free radicals studied, .R, react with B/sub 12r/, yielding as the first product a pseudocoenzyme denoted Co/sup III/-R. Co/sup III/-CH2C(CH3)2OH is stable for over a second in the pH range 3 to 10 as is Co/sup III/-CH2CHO. The latter compound hydrolyzes in acid solutions to yield B/sub 12a/ and CH3CHO. Co/sup III/-C(CH3)2OH and Co/sup III/-CH(OH)CH2OH decompose heterolytically to yield mainly B/sub 12s/; a side reaction that probably yields Co/sup III/-H via a β-hydride shift is also observed. The kinetics of decomposition of Co/sup III/-CH(OH)CH2OH in neutral solutions are reported. No water elimination from the latter intermediate occurs. The reasons for the latter observation are discussed. 6 figures

  8. Impacts of crystal metal on secondary aliphatic amine aerosol formation during dust storm episodes in Beijing

    Science.gov (United States)

    Liu, Qingyang; Bei, Yiling

    2016-03-01

    Trimethylamine (TMA) enters the atmosphere from a variety of sources and is a ubiquitous atmospheric organic base. The atmospheric reaction mechanism of TMA with key atmospheric oxidants is important to predict its distribution and environmental behavior in the particle phase. While previous studies have extensively focused on the production of particle amine salts (i.e. trimethylamine-N-oxide (TMAO)) using chamber experiments, the atmospheric behavior of TMAO in the environment is still poorly understood. Ambient fine particulate matter (PM2.5) was collected at two sampling sites in Beijing from March 10 to May 10, 2012. We analyzed the samples for water-soluble ions, crystal metals, TMA, and TMAO. Water-soluble ions (e.g. SO42-, NO3-, NH4+), TMA, and TMAO were measured using ion chromatography, while crystal metal (e.g. Al, Fe, Mn) in PM2.5 was quantified by inductively coupled plasma mass spectrometry (ICP-MS). Two dust storms (DS) occurred during the sampling period on March 28 and April 28. Mineral dust impacted PM2.5 mass and composition greatly during dust storm days, as it contributed approximately 1.2-4.0 times greater on dust storm days versus non-dust storm days. We found TMAO concentrations were highly associated with aluminum in PM2.5. Further, we applied the density functional theory (DFT) method to confirm that aluminum plays a catalytic effect in the reaction of TMA with ozone (O3). Our work improves understanding of the effect of crystal metals on secondary aliphatic amine aerosol formation in the atmosphere.

  9. MORPHOLOGICAL ALTERATIONS OF STAPHYLOCOCCUS AUREUS CAUSED BY ARYL ALIPHATIC AMINOALCOHOL DERIVATIVE

    Directory of Open Access Journals (Sweden)

    Dronova M.

    2015-05-01

    Full Text Available Increasing of antimicrobial resistance has created a critical need of the novel antimicrobial agents. One of the promising chemical classes for its development are aryl aliphatic aminoalcohols. New compounds of this class were synthesized at the Institute of organic chemistry (Kiev, Ukraine, by Y. Korotkiy. After the screening studies compound KVM-194 was selected as the potent antistaphylococcal agent. The aim of the study was to examine ultrastructural changes in the bacterial cells under the influence of the compound KVM-194. Materials and methods. Staphylococcus aureus ATCC 25923 was used in all experiments. The minimum inhibitory concentration was determined by serial macrodilution method in Mueller-Hinton broth. Bacteria were exposed to the 0,5 MIC and 5 MICs of the KVM- 194 for 1 h and 24 h. Ultrastructure of intact and treated Staphylococcus aureus cells was examined by transmission electron microscopy after contrasting by osmium tetraoxide and lead citrate. Results and Discussion. The compound KVM-194 possesses a distinct antibacterial activity against Staphylococcus aureus, the minimum inhibitory concentration is 1.25 μg/ml. We found that exposure to KVM-194 at a subinhibitory concentration resulted in alterations of the cell morphology even after 1 h of treatment. The roughness of the cell surface and emerging of the intracellular particles of different electron density were observed. Increase of the incubation time to 24 h led to detachment of membrane from cytoplasm, multimembrane structures within cells emergence and formation of nonpolar septum. 1 h exposition to suprainhibitory concentration of KVM-194 resulted in nucleoid fragmentation, septum abnormalities and necrosis of some cells. We found that increasing of the incubation period to 24 h led to exacerbation of alterations: cell wall rupture, leakage of cytoplasm and a large number of lysed cells were registered. Conclusion. Observed alterations, suggest the possible

  10. Reactions of aliphatic free radicals with copper cations in aqueous solutions

    International Nuclear Information System (INIS)

    Helium-saturated solutions containing copper sulphate and an aliphatic alcohol (methanol, ethanol or propan-2-ol) were pulse irradiated. The kinetics of the reactions thus initiated were followed by the spectrophotometric and conductometric techniques. The results indicate that all three radicals, CR1R2OH, react with Cu2+sub(aq) to yield Cu+sub(aq) + CR1R2O+H3O+. CH2OH radicals react with Cu+sub(aq) according to Cu+sub(aq) + CH2OH yields reversibly Cusup(II) -CH2OH+, K approximately 5 x 103 dm3 mol-1. (Note: In writing Cusup(II) - R+ or Cusup(III) - R2+ the accepted nomenclature is followed for organometallic compounds. This notation does not imply that the nature of the chemical bond is ionic. Furthermore, the results indicate that the Cu - C bond has at least partially a covalent nature.) The corresponding equilibrium constants for Cusup(II) - CH(CH3)OH+ and Cusup(II) - C(CH3)2OH+ are too low to be measured and the corresponding intermediates are not observed. Cu+sub(aq) reacts with the β radicals, CH2CH2OH and CH2CH(CH3)OH, according to Cu+sub(aq) + CH2CR1R2OH → Cusup(II) - CH2CR1R2OH+. The latter intermediates decompose via acid catalysed reactions to yield Cu2+sub(aq) + H2C = CR1R2 + H2O. (author)

  11. Gamma-irradiation stability of saturated and unsaturated aliphatic polyanhydrides--ricinoleic acid based polymers.

    Science.gov (United States)

    Teomim, D; Mäder, K; Bentolila, A; Magora, A; Domb, A J

    2001-01-01

    The effect of terminal sterilization by gamma-irradiation on several ricinoleic acid based polyanhydrides was investigated. The following polymers were used: poly(ricinoleic acid maleate) [P(RAM)], poly(ricinoleic acid succinate) [P(RAS)], poly(hydroxy stearic acid succinate) [P(HSAS)], poly(hydroxy stearic acid maleate) [P(HSAM)], and their copolymers with sebacic acid. The polymers were irradiated with an absorbed dose of 2.5 or 10 Mrad by means of a 60Co source under dry ice or at room temperature. No differences were found between samples irradiated under dry ice and at room temperature. Polymers prepared from monomers containing maleate residues, which contain double bonds adjusted to the anhydride linkage along the polymer chain, decreased in molecular weight, became insoluble, and showed fast hydrolytic degradation. For example, p(RAM), p(HSAM), and their copolymers with sebacic acid decreased in Mw from about 10,000 to about 2000, and from about 30,000 to about 5000, respectively, while polymers based on RAS and HSAS remained stable. This phenomenon was explained by an anhydride interchange-self-depolymerization process of the unsaturated anhydride bonds induced by gamma-irradiation. This explanation was supported by the depolymerization of another class of polymers having an anhydride bond between two double bonds, fumaric acid anhydride polymers. The anhydride bond that lies between two double bonds was found to be more sensitive to gamma-irradiation. This anhydride bond may be cleaved to form two radicals that further react with aliphatic anhydride bonds along the polymer chain to form inter- and/or intracyclization products. PMID:11710004

  12. In vitro and in vivo degradation profile of aliphatic polyesters subjected to electron beam sterilization.

    Science.gov (United States)

    Dånmark, S; Finne-Wistrand, A; Schander, K; Hakkarainen, M; Arvidson, K; Mustafa, K; Albertsson, A-C

    2011-05-01

    Degradation characteristics in response to electron beam sterilization of designed and biodegradable aliphatic polyester scaffolds are relevant for clinically successful synthetic graft tissue regeneration. Scaffold degradation in vitro and in vivo were documented and correlated to the macroscopic structure and chemical design of the original polymer. The materials tested were of inherently diverse hydrophobicity and crystallinity: poly(L-lactide) (poly(LLA)) and random copolymers from L-lactide and ε-caprolactone or 1,5-dioxepan-2-one, fabricated into porous and non-porous scaffolds. After sterilization, the samples underwent hydrolysis in vitro for up to a year. In vivo, scaffolds were surgically implanted into rat calvarial defects and retrieved for analysis after 28 and 91days. In vitro, poly(L-lactide-co-1,5-dioxepan-2-one) (poly(LLA-co-DXO)) samples degraded most rapidly during hydrolysis, due to the pronounced chain-shortening reaction caused by the sterilization. This was indicated by the rapid decrease in both mass and molecular weight of poly(LLA-co-DXO). Poly(L-lactide-co-ε-caprolactone) (poly(LLA-co-CL)) samples were also strongly affected by sterilization, but mass loss was more gradual; molecular weight decreased rapidly during hydrolysis. Least affected by sterilization were the poly(LLA) samples, which subsequently showed low mass loss rate and molecular weight decrease during hydrolysis. Mechanical stability varied greatly: poly(LLA-co-CL) withstood mechanical testing for up to 182 days, while poly(LLA) and poly(LLA-co-DXO) samples quickly became too brittle. Poly(LLA-co-DXO) samples unexpectedly degraded more rapidly in vitro than in vivo. After sterilization by electron beam irradiation, the three biodegradable polymers present widely diverse degradation profiles, both in vitro and in vivo. Each exhibits the potential to be tailored to meet diverse clinical tissue engineering requirements. PMID:21316490

  13. Synthesis and characterization of aromatic and aliphatic ether bridged polymers containing carbazole moieties

    Energy Technology Data Exchange (ETDEWEB)

    Kaya, İsmet, E-mail: kayaismet@hotmail.com; Temizkan, Kevser; Aydın, Aysel

    2013-08-01

    Graphical abstract: Novel ether bridged polymers containing carbazole moieties were synthesized via elimination of HBr. Fluorescence measurements of the polymers were performed using N,N′-dimethyl formamide solutions. The morphologic properties of the polymers were investigated by using Scanning Electron Microscopy. Thermal stabilities were determined TGA measurements. -- Highlights: • Novel ether bridged polymers containing carbazole moieties were synthesized via elimination of HBr. • Fluorescence measurements of the polymers were performed using DMF solutions. • The morphologic properties of the polymers were investigated by using Scanning Electron Microscopy. • Thermal stabilities were determined TGA measurements. -- Abstract: In this study, the polymers were synthesized ether bridged containing carbazole moieties via HBr elimination. Also, these polymers include the aliphatic chains at the different lengths and aromatic groups in their structures. However, the polymers were characterized by FT-IR, NMR and UV–vis spectroscopy, and their thermal stabilities were determined via TGA measurements. Fluorescence measurements were performed using N,N′-dimethyl formamide solutions and also, the optimization of the concentrations to obtain maximal emission intensity was investigated in N,N′-dimethyl formamide. The morphologic properties of the polymers were investigated at different particle sizes by using Scanning Electron Microscopy (SEM). Additionally, the number average molecular weight (M{sub n}), weight average molecular weight (M{sub w}) and polydispersity index (PDI) values of the polymers were determined by size exclusion chromatography (SEC) technique. Resultantly, the remarkable properties related to the fluorescence and thermal measurements of the polymers were obtained. Therefore, these polymers could be used in various application fields because of the fluorescent and thermal properties.

  14. Effect of aliphatic, monocarboxylic, dicarboxylic, heterocyclic and sulphur-containing amino acids on Leishmania spp. chemotaxis.

    Science.gov (United States)

    Diaz, E; Zacarias, A K; Pérez, S; Vanegas, O; Köhidai, L; Padrón-Nieves, M; Ponte-Sucre, A

    2015-11-01

    In the sand-fly mid gut, Leishmania promastigotes are exposed to acute changes in nutrients, e.g. amino acids (AAs). These metabolites are the main energy sources for the parasite, crucial for its differentiation and motility. We analysed the migratory behaviour and morphological changes produced by aliphatic, monocarboxylic, dicarboxylic, heterocyclic and sulphur-containing AAs in Leishmania amazonensis and Leishmania braziliensis and demonstrated that L-methionine (10-12 m), L-tryptophan (10-11 m), L-glutamine and L-glutamic acid (10-6 m), induced positive chemotactic responses, while L-alanine (10-7 m), L-methionine (10-11 and 10-7 m), L-tryptophan (10-11 m), L-glutamine (10-12 m) and L-glutamic acid (10-9 m) induced negative chemotactic responses. L-proline and L-cysteine did not change the migratory potential of Leishmania. The flagellum length of L. braziliensis, but not of L. amazonensis, decreased when incubated in hyperosmotic conditions. However, chemo-repellent concentrations of L-alanine (Hypo-/hyper-osmotic conditions) and L-glutamic acid (hypo-osmotic conditions) decreased L. braziliensis flagellum length and L-methionine (10-11 m, hypo-/hyper-osmotic conditions) decreased L. amazonensis flagellum length. This chemotactic responsiveness suggests that Leishmania discriminate between slight concentration differences of small and structurally closely related molecules and indicates that besides their metabolic effects, AAs play key roles linked to sensory mechanisms that might determine the parasite's behaviour.

  15. Degradation kinetics of chlorinated aliphatic hydrocarbons by methane oxidizers naturally-associated with wetland plant roots.

    Science.gov (United States)

    Powell, C L; Goltz, M N; Agrawal, A

    2014-12-01

    Chlorinated aliphatic hydrocarbons (CAHs) are common groundwater contaminants that can be removed from the environment by natural attenuation processes. CAH biodegradation can occur in wetland environments by reductive dechlorination as well as oxidation pathways. In particular, CAH oxidation may occur in vegetated wetlands, by microorganisms that are naturally associated with the roots of wetland plants. The main objective of this study was to evaluate the cometabolic degradation kinetics of the CAHs, cis-1,2-dichloroethene (cisDCE), trichloroethene (TCE), and 1,1,1-trichloroethane (1,1,1TCA), by methane-oxidizing bacteria associated with the roots of a typical wetland plant in soil-free system. Laboratory microcosms with washed live roots investigated aerobic, cometabolic degradation of CAHs by the root-associated methane-oxidizing bacteria at initial aqueous [CH4] ~1.9mgL(-1), and initial aqueous [CAH] ~150μgL(-1); cisDCE and TCE (in the presence of 1,1,1TCA) degraded significantly, with a removal efficiency of approximately 90% and 46%, respectively. 1,1,1TCA degradation was not observed in the presence of active methane oxidizers. The pseudo first-order degradation rate-constants of TCE and cisDCE were 0.12±0.01 and 0.59±0.07d(-1), respectively, which are comparable to published values. However, their biomass-normalized degradation rate constants obtained in this study were significantly smaller than pure-culture studies, yet they were comparable to values reported for biofilm systems. The study suggests that CAH removal in wetland plant roots may be comparable to processes within biofilms. This has led us to speculate that the active biomass may be on the root surface as a biofilm. The cisDCE and TCE mass losses due to methane oxidizers in this study offer insight into the role of shallow, vegetated wetlands as an environmental sink for such xenobiotic compounds.

  16. Cyclic derivatives of D-glucose and tartaric acid as building blocks for renewable polyesters

    OpenAIRE

    Japu, Cristina

    2014-01-01

    Three series of aromatic copolyesters derived from poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT) and poly(hexamethylene terephthalate) (PHT) have been synthesized by melt polycondensation in which the terephthalate and oxyalkylene units have been partially or totally replaced by monocyclic and bicyclic diacids and diols obtained by derivatization of renewable monomers such as tartaric acid and D-glucose respectively. Another series of aliphatic copolyesters derived f...

  17. Direct enantioseparation of underivatized aliphatic 3-hydroxyalkanoic acids with a quinine-based zwitterionic chiral stationary phase.

    Science.gov (United States)

    Ianni, Federica; Pataj, Zoltán; Gross, Harald; Sardella, Roccaldo; Natalini, Benedetto; Lindner, Wolfgang; Lämmerhofer, Michael

    2014-10-10

    While aliphatic 2-hydroxyalkanoic acids have been more or less successfully enantioseparated with various chiral stationary phases by HPLC and GC, analogous applications on underivatized aliphatic 3-hydroxyalkanoic acids are completely absent in the scientific literature. With the aim of closing this gap, the enantioseparation of 3-hydroxybutyric acid, 3-hydroxydecanoic acid and 3-hydroxymyristic acid has been performed with two ion-exchange type chiral stationary phases (CSPs): one containing the anion-exchange type tert-butyl carbamoyl quinine chiral selector motif (Chiralpak QN-AX), and the other carrying the new zwitterionic variant based on trans-(S,S)-2-aminocyclohexanesulfonic acid-derivatized quinine carbamate (Chiralpak ZWIX(+)) as the chiral selector and enantiodiscriminating element, respectively. The zwitterionic enantiorecognition material provided better results in terms of enantioselectivity and resolution compared to the anion-exchanger CSP at reduced retention times due to the intramolecular counterion effect imposed by the sulfonic acid moiety and its competition with the 3-hydroxyalkanoic acid analyte for ionic interaction at the quininium-anion exchanger site. It is thus recommended as the CSP of first choice for enantioseparations of the class of aliphatic 3-hydroxyalkanoic acids. With use of polar organic eluent composed of ACN/MeOH/AcOH - 95/5/0.05 (v/v/v), a good compromise in terms of analysis time and enantioresolution quality was accomplished. The major experimental variables have been investigated for optimization of the resolution and allowed to derive information on the enantiorecognition mechanism. Corresponding Chiralpak ZWIX(-), based on pseudo-enantiomeric selector derived from quinidine and trans-(R,R)-2-aminocyclohexanesulfonic acid with opposite configurations provided reversed enantiomer elution orders. It has further to be stressed that these separations can be obtained with mass spectrometry compatible mobile phases.

  18. Characterization, Distribution, Sources and Origins of Aliphatic Hydrocarbons from Surface Sediment of Prai Strait, Penang, Malaysia: A Widespread Anthropogenic Input

    Directory of Open Access Journals (Sweden)

    Mahyar Sakari

    2008-07-01

    Full Text Available Persistent organic pollutants such as petroleum hydrocarbons are one of the most serious and important class of pollutants that face to many countries including Malaysia. Aliphatic hydrocarbons contain straight chain alkane; derive from anthropogenic and natural sources to the marine environment. The multi-purpose strait of Prai is located in the Northwest of Peninsular Malaysia plays an important economic role in the Southeast Asia. Twenty surface sediment samples were collected using Eckman dredge to measure the concentration and determine the characterization, sources and origins of the aliphatic hydrocarbons in December 2006. Samples (top 4 cm were extracted with Soxhlet, treated with activated copper and subjected to 2 steps column chromatography for purification and fractionation. Alkane fraction injected into Gas Chromatography–Flame Ionization Detector (GC-FID for instrumental analysis. The results showed that total n-alkane concentrations are ranging from 512 to 10770 ng/mg d. w. Carbon Preferences Index (CPI revealed an extreme widespread anthropogenic input and naturally derived (CPI= 0 to 4.88 hydrocarbons in the study area. The ratio of C31/C19 indicated that natural hydrocarbons are generating from terrestrial vascular plants and transferring by rivers. The characteristics of Major Hydrocarbons provided evidences that oil and its derivatives either fresh or degraded are the major contributors of the pollution in the study area. Statistical approaches also confirmed that 85% of study area affected by oil sources of pollution. It is seen that aliphatic hydrocarbons mostly transfer by lateral input to the marine environment than atmospheric movements.

  19. Aliphatic amines in Antarctic CR2, CM2, and CM1/2 carbonaceous chondrites

    Science.gov (United States)

    Aponte, José C.; McLain, Hannah L.; Dworkin, Jason P.; Elsila, Jamie E.

    2016-09-01

    Meteoritic water-soluble organic compounds provide a unique record of the processes that occurred during the formation of the solar system and the chemistry preceding the origins of life on Earth. We have investigated the molecular distribution, compound-specific δ13C isotopic ratios and enantiomeric compositions of aliphatic monoamines present in the hot acid-water extracts of the carbonaceous chondrites LAP 02342 (CR2), GRA 95229 (CR2), LON 94101 (CM2), LEW 90500 (CM2), and ALH 83100 (CM1/2). Analyses of the concentration of monoamines in these meteorites revealed: (a) the CR2 chondrites studied here contain higher concentrations of monoamines relative to the analyzed CM2 chondrites; (b) the concentration of monoamines decreases with increasing carbon number; and (c) isopropylamine is the most abundant monoamine in these CR2 chondrites, while methylamine is the most abundant amine species in these CM2 and CM1/2 chondrites. The δ13C values of monoamines in CR2 chondrite do not correlate with the number of carbon atoms; however, in CM2 and CM1/2 chondrites, the 13C enrichment decreases with increasing monoamine carbon number. The δ13C values of methylamine in CR2 chondrites ranged from -1 to +10‰, while in CM2 and CM1/2 chondrites the δ13C values of methylamine ranged from +41 to +59‰. We also observed racemic compositions of sec-butylamine, 3-methyl-2-butylamine, and sec-pentylamine in the studied carbonaceous chondrites. Additionally, we compared the abundance and δ13C isotopic composition of monoamines to those of their structurally related amino acids. We found that monoamines are less abundant than amino acids in CR2 chondrites, with the opposite being true in CM2 and CM1/2 chondrites. We used these collective data to evaluate different primordial synthetic pathways for monoamines in carbonaceous chondrites and to understand the potential common origins these molecules may share with meteoritic amino acids.

  20. Marsh plant response to metals: Exudation of aliphatic low molecular weight organic acids (ALMWOAs)

    Science.gov (United States)

    Rocha, A. Cristina S.; Almeida, C. Marisa R.; Basto, M. Clara P.; Vasconcelos, M. Teresa S. D.

    2016-03-01

    Metal exposure is known to induce the production and secretion of substances, such as aliphatic low molecular weight organic acids (ALMWOAs), into the rhizosphere by plant roots. Knowledge on this matter is extensive for soil plants but still considerably scarce regarding marsh plants roots adapted to high salinity media. Phragmites australis and Halimione portulacoides, two marsh plants commonly distributed in European estuarine salt marshes, were used to assess the response of roots of both species, in terms of ALMWOAs exudation, to Cu, Ni and Cd exposure (isolated and in mixture since in natural environment, they are exposed to mixture of metals). As previous studies were carried out in unrealistic and synthetic media, here a more natural medium was selected. Therefore, in vitro experiments were carried out, with specimens of both marsh plants, and in freshwater contaminated with two different Cu, Ni and Cd concentrations (individual metal and in mixture). Both marsh plants were capable of liberating ALMWOAs into the surrounding medium. Oxalic, citric and maleic acids were found in P. australis root exudate solutions and oxalic and maleic acids in H. portulacoides root exudate solutions. ALMWOA liberation by both plants was plant species and metal-dependent. For instance, Cu affected the exudation of oxalic acid by H. portulacoides and of oxalic and citric acids by P. australis roots. In contrast, Ni and Cd did not stimulate any specific response. Regarding the combination of all metals, H. portulacoides showed a similar response to that observed for Cu individually. However, in the P. australis case, at high metal concentration mixture, a synergetic effect led to the increase of oxalic acid levels in root exudate solution and to a decrease of citric acid liberation. A correlation between ALMWOAs exudation and metal accumulation could not be established. P. australis and H. portulacoides are considered suitable metal phytoremediators of estuarine impacted areas

  1. Use of Aliphatic n-Alkynes To Discriminate Soil Nitrification Activities of Ammonia-Oxidizing Thaumarchaea and Bacteria

    OpenAIRE

    Taylor, Anne E.; Vajrala, Neeraja; Giguere, Andrew T.; Gitelman, Alix I; Arp, Daniel J.; Myrold, David D.; Sayavedra-Soto, Luis; Bottomley, Peter J

    2013-01-01

    Ammonia (NH3)-oxidizing bacteria (AOB) and thaumarchaea (AOA) co-occupy most soils, yet no short-term growth-independent method exists to determine their relative contributions to nitrification in situ. Microbial monooxygenases differ in their vulnerability to inactivation by aliphatic n-alkynes, and we found that NH3 oxidation by the marine thaumarchaeon Nitrosopumilus maritimus was unaffected during a 24-h exposure to ≤20 μM concentrations of 1-alkynes C8 and C9. In contrast, NH3 oxidation ...

  2. Physico-chemical properties of binary mixtures of aliphatic and aromatic solvents at 313 K on acoustical data

    Science.gov (United States)

    Dahire, S. L.; Morey, Y. C.; Agrawal, P. S.

    2015-12-01

    Density (ρ), viscosity (η), and ultrasonic velocity ( U) of binary mixtures of aliphatic solvents like dimethylformamide (DMF) and dimethylsulfoxide (DMSO) with aromatic solvents viz. chlorobenzene (CB), bromobenzene (BB), and nitrobenzene (NB) have been determined at 313 K. These parameters were used to calculate the adiabatic compressibility (β), intermolecular free length ( L f), molar volume ( V m), and acoustic impedance ( Z). From the experimental data excess molar volume ( V m E ), excess intermolecular free length ( L f E )), excess adiabatic compressibility (βE), and excess acoustic impedance ( Z E) have been computed. The excess values were correlated using Redlich-Kister polynomial equation to obtain their coefficients and standard deviations (σ).

  3. Determination of Aliphatic Acid and Ester in Ganoderma lucidum by Gas Chromatography-Time of Flight Mass Spectrometry%气相色谱-飞行时间质谱测定灵芝中脂肪酸(酯)

    Institute of Scientific and Technical Information of China (English)

    李前荣; 潘振; 尹浩

    2004-01-01

    The extracts of Ganoderma lucidum capsule powder (A) and natural ganoaerma lucidum (B) have been and analyzed by gas chromatography-time of flight mass spectrometry (GC-TOFMS). A great quantity of aliphatic acid (ester)Was observed at tR= 18min and tR = 20min, including the unsaturated aliphatic acid which is valuable. The relative content of aliphatic acid in sample A was 49.6%, of which 19.4% was linoleic acid, and those in sample B was 32.6%, of which 7.0% was linoleic acid. The relative content of aliphatic acids in sample A was higher than that in sample B.

  4. Ion-Exclusion High-Performance Liquid Chromatography of Aliphatic Organic Acids Using a Surfactant-Modified C18 Column.

    Science.gov (United States)

    Fasciano, Jennifer M; Mansour, Fotouh R; Danielson, Neil D

    2016-07-01

    Ion exclusion chromatography (IELC) of short chain aliphatic carboxylic acids is normally done using a cation exchange column under standard HPLC conditions but not in the ultra-HPLC (UHPLC) mode. A novel IELC method for the separation of this class of carboxylic acids by either HPLC or UHPLC utilizing a C18 column dynamically modified with sodium dodecyl sulfate has been developed. The sample capacity is estimated to be near 10 mM for a 20 µL injection or 0.2 µmol using a 150 × 4.6 mm column. The optimum mobile phase determined for three standard mixtures of organic acids is 1.84 mM sulfuric acid at pH 2.43 and a flow rate of 0.6 mL/min. Under optimized conditions, a HPLC separation of four aliphatic carboxylic acids such as tartaric, malonic, lactic and acetic can be achieved in under 4 min and in column as measured by the retention order of maleic and fumaric acid is estimated to be ∼4,000 column volumes using HPLC and 600 by UHPLC. Reproducible chromatograms are achieved over at least a 2-month period. This study shows that the utility of a C18 column can be easily extended when needed to IELC under either standard or UHPLC conditions.

  5. In-Situ Heating Decrease Kinetics of Aliphatic Hydrocarbons in Tagish Lake Meteorite by Micro-FTIR

    Science.gov (United States)

    Kebukawa, Y.; Nakashima, S.; Zolensky, M. E.

    2005-01-01

    Carbonaceous chondrites are known to contain up to 3wt.% C, the major part of which corresponds to a macromolecular organic fraction. Chondritic organic matter is based on small aromatic units, cross-linked by short aliphatic chains rather than large clusters of polyaromatic structures. Two main characteristic features of those organics measured by FTIR are: (1) an equivalent intensity of the asymmetric stretching mode absorptions for CH3 (2960/cm) and CH2 (2920/cm) and (2) a lack of aromatic CH-stretching mode (3040/cm). Tagish Lake is a new type of water- and carbon-rich type 2 carbonaceous chondrite. Its total carbon content is approx. 5 wt%, of which the organic carbon content reaches approx. 1.3 wt%. Tagish Lake may have never experienced temperatures higher than 120 C after formation of organics based on the disappearance of infrared (IR) organic peaks in step heating experiments. Here we report in-situ kinetic heating experiments of organics in Tagish Lake by micro-FTIR to characterize the nature of aliphatic hydrocarbons and their thermal stabilities.

  6. Forensic investigation of aliphatic hydrocarbons in the sediments from selected mangrove ecosystems in the west coast of Peninsular Malaysia.

    Science.gov (United States)

    Vaezzadeh, Vahab; Zakaria, Mohamad Pauzi; Shau-Hwai, Aileen Tan; Ibrahim, Zelina Zaiton; Mustafa, Shuhaimi; Abootalebi-Jahromi, Fatemeh; Masood, Najat; Magam, Sami Mohsen; Alkhadher, Sadeq Abdullah Abdo

    2015-11-15

    Peninsular Malaysia has gone through fast development during recent decades resulting in the release of large amounts of petroleum and its products into the environment. Aliphatic hydrocarbons are one of the major components of petroleum. Surface sediment samples were collected from five rivers along the west coast of Peninsular Malaysia and analyzed for aliphatic hydrocarbons. The total concentrations of C10 to C36 n-alkanes ranged from 27,945 to 254,463ng·g(-1)dry weight (dw). Evaluation of various n-alkane indices such as carbon preference index (CPI; 0.35 to 3.10) and average chain length (ACL; 26.74 to 29.23) of C25 to C33 n-alkanes indicated a predominance of petrogenic source n-alkanes in the lower parts of the Rivers, while biogenic origin n-alkanes from vascular plants are more predominant in the upper parts, especially in less polluted areas. Petrogenic sources of n-alkanes are predominantly heavy and degraded oil versus fresh oil inputs.

  7. A Comparative Study of Two Quantum Chemical Descriptors in Predicting Toxicity of Aliphatic Compounds towards Tetrahymena pyriformis

    Directory of Open Access Journals (Sweden)

    Altaf Hussain Pandith

    2010-01-01

    Full Text Available Quantum chemical parameters such as LUMO energy, HOMO energy, ionization energy (I, electron affinity (A, chemical potential (μ, hardness (η electronegativity (χ, philicity (ωα, and electrophilicity (ω of a series of aliphatic compounds are calculated at the B3LYP/6-31G(d level of theory. Quantitative structure-activity relationship (QSAR models are developed for predicting the toxicity (pIGC50 of 13 classes of aliphatic compounds, including 171 electron acceptors and 81 electron donors, towards Tetrahymena pyriformis. The multiple linear regression modeling of toxicity of these compounds is performed by using the molecular descriptor log P (1-octanol/water partition coefficient in conjunction with two other quantum chemical descriptors, electrophilicity (ω and energy of the lowest unoccupied molecular orbital (ELUMO. A comparison is made towards the toxicity predicting the ability of electrophilicity (ω versus ELUMO as a global chemical reactivity descriptor in addition to log P. The former works marginally better in most cases. There is a slight improvement in the quality of regression by changing the unit of IGC50 from mg/L to molarity and by removing the racemates and the diastereoisomers from the data set.

  8. A novel high-performance thin layer chromatography method for quantification of long chain aliphatic hydrocarbons from Cissus quadrangularis

    Directory of Open Access Journals (Sweden)

    Vandana Jain

    2016-08-01

    Full Text Available Context: A high-performance thin layer chromatography (HPTLC is an analytical technique, which can be used for the determination of constituents or marker components in various parts of the plants. Earlier studies have estimated phytoconstituents from the stem and other aerial plant parts of Cissus quadrangularis Linn. Estimation of hydrocarbons can also be successfully done using HPTLC technique using suitable derivatization. Aims: To develop and validate a simple and rapid method for the estimation of long chain aliphatic hydrocarbons from the leaves of C. quadrangularis using HPTLC technique. Methods: Precoated silica gel 60 F254 plates were used as stationary phase. The mobile phase used was hexane (100 %. The detection of spots was carried out using berberine sulphate as detecting reagent. Results: The method was validated in terms of linearity, sensitivity, accuracy, and precision. Linearity range was found to be 2-10 µg/mL, limit of detection 0.127 µg/mL, and limit of quantification 0.384 µg/mL. Conclusions: A novel, simple, accurate, precise and sensitive HPTLC method has been developed and validated for the estimation of long chain aliphatic hydrocarbons obtained from the leaves of C. quadrangularis Linn.

  9. Content of carotenoids, tocopherols, sterols, triterpenic and aliphatic alcohols, and volatile compounds in six walnuts (Juglans regia L.) varieties.

    Science.gov (United States)

    Abdallah, Ikram Bou; Tlili, Nizar; Martinez-Force, Enrique; Rubio, Ana Gracia Pérez; Perez-Camino, Maria Carmen; Albouchi, Ali; Boukhchina, Sadok

    2015-04-15

    The aim of this work was to study the content of tocopherols, sterols, triterpenic and aliphatic alcohols, carotenoids, and volatile compounds in the kernel oils from six walnut (Juglans regia L.) varieties. The levels of β-carotene ranged between 0.22 and 0.62 mg/kg, followed by lutein (0.01-0.06 mg/kg). The total content of tocopherol ranged from 186.5 to 436.2 mg/kg of the extracted oil and the major isoform in all samples was γ-tocopherol. The most abundant phytosterol was β-sitosterol (974-1494 mg/kg) followed by campesterol then Δ-5-avenasterol. The major triterpenic alcohol was cycloartenol (226.4-532.1 mg/kg). Hexacosanol (9.71-28.15 mg/kg) was the major aliphatic alcohol. The detected volatile compounds were pentanal, hexanal, nonanal, 2-decenal and hexanol. The statistical analysis showed significant differences between varieties, which are probably due to genetic factors.

  10. Quantitative structure-activity relationship (QSAR) prediction of (eco)toxicity of short aliphatic protic ionic liquids.

    Science.gov (United States)

    Peric, Brezana; Sierra, Jordi; Martí, Esther; Cruañas, Robert; Garau, Maria Antonia

    2015-05-01

    Ionic liquids (ILs) are considered as a group of very promising compounds due to their excellent properties (practical non-volatility, high thermal stability and very good and diverse solving capacity). The ILs have a good prospect of replacing traditional organic solvents in vast variety of applications. However, the complete information on their environmental impact is still not available. There is also an enormous number of possible combinations of anions and cations which can form ILs, the fact that requires a method allowing the prediction of toxicity of existing and potential ILs. In this study, a group contribution QSAR model has been used in order to predict the (eco)toxicity of protic and aprotic ILs for five tests (Microtox®, Pseudokirchneriella subcapitata and Lemna minor growth inhibition test, and Acetylcholinestherase inhibition and Cell viability assay with IPC-81 cells). The predicted and experimental toxicity are well correlated. A prediction of EC50 for these (eco)toxicity tests has also been made for eight representatives of the new family of short aliphatic protic ILs, whose toxicity has not been determined experimentally to date. The QSAR model applied in this study can allow the selection of potentially less toxic ILs amongst the existing ones (e.g. in the case of aprotic ILs), but it can also be very helpful in directing the synthesis efforts toward developing new "greener" ILs respectful with the environment (e.g. short aliphatic protic ILs). PMID:25728357

  11. Forensic investigation of aliphatic hydrocarbons in the sediments from selected mangrove ecosystems in the west coast of Peninsular Malaysia.

    Science.gov (United States)

    Vaezzadeh, Vahab; Zakaria, Mohamad Pauzi; Shau-Hwai, Aileen Tan; Ibrahim, Zelina Zaiton; Mustafa, Shuhaimi; Abootalebi-Jahromi, Fatemeh; Masood, Najat; Magam, Sami Mohsen; Alkhadher, Sadeq Abdullah Abdo

    2015-11-15

    Peninsular Malaysia has gone through fast development during recent decades resulting in the release of large amounts of petroleum and its products into the environment. Aliphatic hydrocarbons are one of the major components of petroleum. Surface sediment samples were collected from five rivers along the west coast of Peninsular Malaysia and analyzed for aliphatic hydrocarbons. The total concentrations of C10 to C36 n-alkanes ranged from 27,945 to 254,463ng·g(-1)dry weight (dw). Evaluation of various n-alkane indices such as carbon preference index (CPI; 0.35 to 3.10) and average chain length (ACL; 26.74 to 29.23) of C25 to C33 n-alkanes indicated a predominance of petrogenic source n-alkanes in the lower parts of the Rivers, while biogenic origin n-alkanes from vascular plants are more predominant in the upper parts, especially in less polluted areas. Petrogenic sources of n-alkanes are predominantly heavy and degraded oil versus fresh oil inputs. PMID:26323864

  12. Camphor-10-sulfonic acid catalyzed condensation of 2-naphthol with aromatic/aliphatic aldehydes to 14-aryl/alkyl-14H-dibenzo[a,j]xanthenes

    Directory of Open Access Journals (Sweden)

    Kundu Kshama

    2014-01-01

    Full Text Available (±-Camphor-10-sulfonic acid (CSA catalyzed condensation of 2-naphthol with both aliphatic/aromatic aldehydes at 80°C yielded 14-alkyl/aryl-dibenzoxanthenes as the sole product in high yields. However, the same condensation with benzaldehyde at 25°C afforded a mixture of intermediate 1,1-bis-(2-hydroxynaphthylphenylmethane and 14-phenyl-dibenzoxanthene while the condensation with aliphatic aldehydes at 25°C furnished the corresponding 14-alkyl-dibenzoxanthenes as the sole product. Moreover, condensation of 2-naphthol with aromatic/aliphatic aldehydes with low catalyst loading (2 mol% was greatly accelerated under microwave irradiation to afford the corresponding 14-aryl/alkyl-dibenzoxanthenes as the sole product in high yields.

  13. Demens Film

    DEFF Research Database (Denmark)

    Ridder, Hanne Mette Ochsner

    2012-01-01

    I forbindelse med opstarten af Demens Film projektet har der været nedsat en ekspertgruppe, som er kommet med en række anbefalinger omkring film til mennesker med demens. Anbefalingerne skal bruges i de næste faser af projektet. Deltagerne i ekspertgruppen var sammensat af en bred gruppe...... fagpersoner inde for forskellige fagområder. Læs mere om gruppens anbefalinger og sammensætning af ekspertgruppen i den kort rapport som er offentlig tilgængelig. Læs Ekspertgruppe anbefalingerne til Demens Film projekt....

  14. Joint Test Report For Validation of Alternatives to Aliphatic Isocyanate Polyurethanes

    Science.gov (United States)

    Lewis, Pattie

    2007-01-01

    National Aeronautics and Space Administration (NASA) and Air Force Space Command (AFSPC) have similar missions and therefore similar facilities and structures in similar environments. The standard practice for protecting metallic substrates in atmospheric environments is the application of an applied coating system. The most common topcoats used in coating systems are polyurethanes that contain isocyanates. Isocyanates are classified as potential human carcinogens and are known to cause cancer in animals. The primary objective of this effort was to demonstrate and validate alternatives to aliphatic isocyanate polyurethanes resulting in one or more isocyanate-free coatings qualified for use at AFSPC and NASA installations participating in this project. This joint Test Report (JTR) documents the results of the laboratory and field testing as well as any test modifications made during the execution of the testing. The technical stakeholders agreed upon test procedure modifications documented in this document. This JTR is made available as a reference for future pollution prevention endeavors by other NASA centers, the Department of Defense and commercial users to minimize duplication of effort. All coating system candidates were tested using approved NASA and AFSPC standard coating systems as experimental controls. This study looked at eight alternative coating systems and two control coating systems and was divided into Phase I Screening Tests, Phase II Tests, and Field Testing. The Phase I Screening Tests were preliminary tests performed on all the selected candidate coating systems. Candidate coating systems that did not meet the acceptance criteria of the screening tests were eliminated from further testing. Phase I Screening Tests included: Ease of Application, Surface Appearance, Dry-To-Touch (Sanding), Accelerated Storage Stability, Pot Life (Viscosity), Cure Time (Solvent Rubs), Cleanability, Knife Test, Tensile (pull-off) Adhesion, and X-Cut Adhesion by Wet

  15. Piezoelectric Film.

    Science.gov (United States)

    Garrison, Steve

    1992-01-01

    Presents activities that utilize piezoelectric film to familiarize students with fundamental principles of electricity. Describes classroom projects involving chemical sensors, microbalances, microphones, switches, infrared sensors, and power generation. (MDH)

  16. Polymer films

    Science.gov (United States)

    Granick, Steve; Sukhishvili, Svetlana A.

    2008-12-30

    A film contains a first polymer having a plurality of hydrogen bond donating moieties, and a second polymer having a plurality of hydrogen bond accepting moieties. The second polymer is hydrogen bonded to the first polymer.

  17. Comparison of the Photovoltaic Characteristics and Nanostructure of Fullerenes Blended with Conjugated Polymers with Siloxane-Terminated and Branched Aliphatic Side Chains

    KAUST Repository

    Kim, Do Hwan

    2013-02-12

    All-organic bulk heterojunction solar cells based on blends of conjugated polymers with fullerenes have recently surpassed the 8% efficiency mark and are well on their way to the industrially relevant ∼15% threshold. Using a low band-gap conjugated polymer, we have recently shown that polymer side chain engineering can lead to dramatic improvement in the in-plane charge carrier mobility. In this article, we investigate the effectiveness of siloxy side chain derivatization in controlling the photovoltaic performance of polymer:[6,6]-phenyl-C[71]-butyric acid methyl ester (PC71BM) blends and hence its influence on charge transport in the out-of-plane direction relevant for organic solar cells. We find that, in neat blends, the photocurrent of the polymer with siloxy side chains (PII2T-Si) is 4 times greater than that in blends using the polymer with branched aliphatic side chains (PII2T-ref). This difference is due to a larger out-of-plane hole mobility for PII2T-Si brought about by a largely face-on crystallite orientation as well as more optimal nanoscale polymer:PC71BM mixing. However, upon incorporating a common processing additive, 1,8-diiodooctane (DIO), into the spin-casting blend solution and following optimization, the PII2T-ref:PC71BM OPV device performance undergoes a large improvement and becomes the better-performing device, almost independent of DIO concentration (>1%). We find that the precise amount of DIO plays a larger role in determining the efficiency of PII2T-Si:PC71BM, and even at its maximum, the device performance lags behind optimized PII2T-ref:PC71BM blends. Using a combination of atomic force microscopy and small- and wide-angle X-ray scattering, we are able to elucidate the morphological modifications associated with the DIO-induced changes in both the nanoscale morphology and the molecular packing in blend films. © 2012 American Chemical Society.

  18. Plasma-polymerized thiophene films for enhanced rubber steel bonding

    Science.gov (United States)

    Delattre, James L.; d'Agostino, Riccardo; Fracassi, Francesco

    2006-03-01

    Thin films of plasma-polymerized thiophene (PPTh) were deposited on cold-rolled steel substrates to improve adhesion to rubber compounds. PPTh films were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy (FT-IR) and atomic force microscopy. The ratio of carbon-to-sulfur found in PPTh films is 4:1, suggesting the monomer structure is generally intact, which was supported by FT-IR absorptions characteristic of polymerized thiophene rings. However, some fragmentation did occur to give acetylenic and aliphatic groups. Steel-rubber adhesion measurements, performed in accordance with the ASTM 429-B peel test, strongly depended on cleaning and pretreatment methods as well as film thickness. Best results were obtained on polished steel samples that were cleaned with acid, pretreated with a hydrogen/argon plasma, then coated with 50 Å of PPTh film. These samples exhibited a peel force of 14.3 N/mm, which is comparable to that of polished brass control samples. Depth-profiling XPS analysis of the rubber-steel interface showed the existence of an iron sulfide layer which is likely responsible for the strong adhesion.

  19. Advances in longer-chain aliphatic olefins metathesis%长碳链烯烃歧化研究进展

    Institute of Scientific and Technical Information of China (English)

    郑敏; 陈胜利; 袁桂梅; 王雪莲; 桑磊; 尤菊; 张军辉

    2012-01-01

    The research of C4-olefin to produce propylene was the emphasis of aliphatic olefin metathesis technology,but attentions were also paid to longer-chain aliphatic olefins metathesis reaction.The progress of the metathesis reaction of longer-chain aliphatic olefins over rhenium based catalysis,molybdenum based catalysis and tungsten based catalysis were introduced.The study of longer-chain olefin metathesis over tungsten based catalyst,including the optimal operating condition of 1-hexene self-metathesis,1-heptene self-metathesis and 1-octene self-metathesis.The effect of pretreatment on metathesis performance of tungsten based catalyst is primarily introduced.Moreover,the studies of deactivation of metathesis catalyst by oxygenate poisoning and deactivation of tungsten based catalyst by coke formation are also introduced.%目前,虽然直链烯烃歧化研究的重点仍是碳四烯烃歧化制丙烯技术,但是长碳链烯烃歧化研究已开始引起人们的重视。本文介绍了铼基催化剂、钼基催化剂和钨基催化剂催化长碳链烯烃歧化反应的研究进展。重点介绍了钨基催化剂上长碳链歧化研究状况,分别介绍了钨基催化剂上1-己烯自歧化、1-庚烯自歧化、1-辛烯自歧化的最优工艺条件研究以及预处理条件对钨基催化剂歧化性能的影响。同时分别介绍了含氧化合物对歧化催化剂中毒失活的研究以及钨基催化剂上结焦失活的研究状况。

  20. 聚(丁二酸丁二醇酯丁二酸环己烷二甲醇酯)的合成与表征%Synthesis and Characterization of Copolyesters of Succinic Acid-1,4-Butanediol/Succinic Acid-1,4-Cyclohexanedimethanol

    Institute of Scientific and Technical Information of China (English)

    余瑾; 程小苗; 周艺峰; 聂王焰

    2009-01-01

    用熔融缩聚法合成了一系列聚(丁二酸丁二醇酯丁二酸环己烷二甲醇酯)的无规共聚物.用FT-IR,~1H-NMR,DSC,TGA,XRD及水降解测试等方法表征了材料的结构与性能.通过DSC和TGA分析得到产物的熔点虽然较聚丁二酸丁二醇酯(PBS)有所降低,但是热分解温度却得到了提高;XRd测试结果表明,共聚物的晶体结构并没有发生改变;水降解测试结果表明,共聚物较PBS的降解速率有所提高.%A series of copolyesters of succinic acid-1,4-butanediol/succinic acid-1,4-cycl- ohexanedimethanol were synthesized and characterized by means of Fourier transform infrared spectroscopic(FT-IR), hydrogen nuclear magnetic resonance spectrum (~1H-NMR), differential scanning calorimetry ( DSC), thermogravimetry analysis (TGA), X-ray diffraction (XRD) and hydrolytic degradation. Though the melting temperature decreased, the copolymers showed the higher thermal decomposition temperature which was justified by TGA. X-ray diffraction shows that the crystal structure of copolymers is the same as poly (butylene succinate) (PBS). The results of hydrolytic degradation show that the rate of biodegradation of copolymers are higher than that of PBS.

  1. Dielectric studies of hydrogen bonded complexes tri-n-butyl phosphate (TBP) with long-chain aliphatic alcohols

    International Nuclear Information System (INIS)

    The mechanism of dipolar complexation involving TBP and three long chain aliphatic alcohols namely 1-hexanol, 1-heptanol, 1-octanol in a non-polar medium (benzene) was investigated from dielectric measurements at frequency 455 kHz and at temperature 303.16 K using modified Palit's method. The dipole moment of the complex (μbc), interaction dipole moment (Δμ), dipole moment of the H-bonded bridge (μ*) and induced polarization (ΔP) for the thermodynamically most favoured geometry of 1:1 complexes of these systems were computed. The results shows that complexation is due to partial proton transfer in all the cases studied and the tendency of complex formation is maximum in 1-heptanol system. (author)

  2. Oxidation of Aliphatic Alcohols by Using Precious Metals Supported on Hydrotalcite under Solvent- and Base-Free Conditions.

    Science.gov (United States)

    He, Yufei; Feng, Junting; Brett, Gemma L; Liu, Yanan; Miedziak, Peter J; Edwards, Jennifer K; Knight, David W; Li, Dianqing; Hutchings, Graham J

    2015-10-12

    Precious metal nanoparticles supported on magnesium-aluminum hydrotalcite (HT), TiO2 , and MgO were prepared by sol immobilization and assessed for the catalytic oxidation of octanol, which is a relatively unreactive aliphatic alcohol, with molecular oxygen as the oxidant under solvent- and base-free conditions. Compared with the TiO2 - and MgO-supported catalysts, platinum HT gave the highest activity and selectivity towards the aldehyde. The turnover number achieved for the platinum HT catalyst was >3700 after 180 min under mild reaction conditions. Moreover, the results for the oxidation of different substrates indicate that a specific interaction of octanal with the platinum HT catalyst could lead to deactivation of the catalyst. PMID:26337897

  3. Differences of diurnal variations of some aliphatic and polycyclic aromatic hydrocarbons concentrations in aerosol of the urban area of Madrid

    International Nuclear Information System (INIS)

    A study on daily concentration changes of polycyclic aromatic and aliphatic hydrocarbons (PAH's and AH's), was carried out in aerosols sampled in the Ciudad Universitaria of Madrid. Samples were taken at morning and night during February and June, for short sampling times, on glass fiber filters in Hi-Vol samplers, and then extracted ultrasonically with cyclohexane. Analysis were performed by HRGC with fused-silica capillary columns. The variable traffic rate, and the strong influence during winter periods of domestic heating are characteristic of this place. The aim of this work was to evaluate diurnal and seasonal variations of selected AH and PAH in the urban area of Madrid, by using descriptive parameters, such as total concentrations of AH and PAH, characteristic profiles and predominance carbon index. From these results, it has been tried to identify emission sources of the studied hydrocarbons. (Author). 10 refs

  4. Aliphatic and polycyclic aromatic hydrocarbons risk assessment in coastal water and sediments of Khark Island, SW Iran.

    Science.gov (United States)

    Akhbarizadeh, Razegheh; Moore, Farid; Keshavarzi, Behnam; Moeinpour, Alireza

    2016-07-15

    The potential sources and ecotoxicological risks of 26 aliphatic hydrocarbons (AHs), 16 polycyclic aromatic hydrocarbons (PAHs) and total petroleum hydrocarbons (TPHs) were investigated in coastal water and sediments of Khark Island, SW Iran. The major sources of the contamination were petroleum and petroleum combustion based on the PCA analysis and diagnostic indices of AHs and PAHs, and also ring classification of PAHs. The ecological risk of both individual and multiple PAHs was quite low in sediments compared with screening benchmarks. Likewise, the low concentration of TEQ, MEQ and TEQ(carc) of sediments suggest low toxicity of PAHs in the study area. However, environmental control is recommended to reduce the pollution burden of PAHs in seawater. The human health risk assessment for PAHs through dermal adsorption indicated that the possibility of negative adverse effects of PAHs in sediments is rare but swimming in the vicinity of industrial facilities should be done cautiously. PMID:27207022

  5. Synthesis of a new group of aliphatic hydrazide derivatives and the correlations between their molecular structure and biological activity.

    Science.gov (United States)

    Kostecka, Małgorzata

    2012-01-01

    In view of the growing demand for new compounds showing biological activity against pathogenic microorganisms, such as pathogenic and phytopathogenic fungi, the objective of this study was to synthesize a new group of aliphatic and aromatic derivatives of hydrazide. In consequence of the reactions observed during synthesis, the resulting compounds retained their linear structure. Their structure and lipophilicity, measured by high-performance liquid chromatography (HPLC), were analyzed. Correlations were determined between the compounds' molecular parameters and biological activity against Fusarium solani and Fusarium oxysporum fungi. The investigated compounds were also examined for their antifungal activity against Aspergillus fumigatus. The obtained results indicate that compounds with fluorine-containing substituents penetrate the cell structure more effectively and are characterized by higher antifungal potential than analogues with different substituents. PMID:22441334

  6. Synthesis of a New Group of Aliphatic Hydrazide Derivatives and the Correlations between Their Molecular Structure and Biological Activity

    Directory of Open Access Journals (Sweden)

    Małgorzata Kostecka

    2012-03-01

    Full Text Available In view of the growing demand for new compounds showing biological activity against pathogenic microorganisms, such as pathogenic and phytopathogenic fungi, the objective of this study was to synthesize a new group of aliphatic and aromatic derivatives of hydrazide. In consequence of the reactions observed during synthesis, the resulting compounds retained their linear structure. Their structure and lipophilicity, measured by high-performance liquid chromatography (HPLC, were analyzed. Correlations were determined between the compounds’ molecular parameters and biological activity against Fusarium solani and Fusarium oxysporum fungi. The investigated compounds were also examined for their antifungal activity against Aspergillus fumigatus. The obtained results indicate that compounds with fluorine-containing substituents penetrate the cell structure more effectively and are characterized by higher antifungal potential than analogues with different substituents.

  7. Screening and Quantification of Aliphatic Primary Alkyl Corrosion Inhibitor Amines in Water Samples by Paper Spray Mass Spectrometry.

    Science.gov (United States)

    Jjunju, Fred P M; Maher, Simon; Damon, Deidre E; Barrett, Richard M; Syed, S U; Heeren, Ron M A; Taylor, Stephen; Badu-Tawiah, Abraham K

    2016-01-19

    Direct analysis and identification of long chain aliphatic primary diamine Duomeen O (n-oleyl-1,3-diaminopropane), corrosion inhibitor in raw water samples taken from a large medium pressure water tube boiler plant water samples at low LODs (corrosion inhibitors in an industrial water boiler plant and other related samples in the water treatment industry. This approach was applied for the analysis of three complex water samples including feedwater, condensate water, and boiler water, all collected from large medium pressure (MP) water tube boiler plants, known to be dosed with varying amounts of polyamine and amine corrosion inhibitor components. Polyamine chemistry is widely used for example in large high pressure (HP) boilers operating in municipal waste and recycling facilities to prevent corrosion of metals. The samples used in this study are from such a facility in Coventry waste treatment facility, U.K., which has 3 × 40 tonne/hour boilers operating at 17.5 bar.

  8. Very low temperature irradiation of aliphatic polymers: Role of radical migration on the creation of stable groups (O-127)

    Science.gov (United States)

    Mélot, M.; Ngono-Ravache, Y.; Balanzat, E.

    2003-08-01

    We have analysed the influence of temperature, and thus the role of radical motion on the evolution of two in-chain unsaturated bonds, transvinylene, -CH 2-CHCH-CH 2- and trans-trans diene, -CHCH-CHCH-, created in aliphatic polymers submitted to radiations. Results reported here are related to three polymers (PE, EPDM-1,4 hexadiene and EPR) irradiated with high energy ions at 8 and 298 K. Annealing samples, irradiated at 8 K, up to room temperature provides information on the radical migration effect on the creation and the stability of the studied defects. The modifications were followed on line by Fourier transform infrared spectroscopy. The trans-trans diene groups creation necessarily requires radical migration while an in-cage process is efficient for transvinylene groups creation. The radiative destruction of transvinylene groups is clearly induced by radical migration.

  9. IUPAC-NIST Solubility Data Series. 101. Alcohols + Hydrocarbons + Water. Part 2. C1-C3 Alcohols + Aliphatic Hydrocarbons

    Science.gov (United States)

    Oracz, Paweł; Góral, Marian; Wiśniewska-Gocłowska, Barbara; Shaw, David G.; Mączyński, Andrzej

    2016-09-01

    The mutual solubilities and related liquid-liquid equilibria for 37 ternary systems of C1-C3 alcohols with aliphatic hydrocarbons and water are exhaustively and critically reviewed. Reports of experimental determination of solubility that appeared in the primary literature prior to the end of 2012 are compiled. For 14 systems, sufficient data are available (two or more independent determinations) to allow critical evaluation. All data are expressed as mass percent and mole fraction as well as the originally reported units. In addition to the standard evaluation criteria used throughout the Solubility Data Series, an additional criterion was used for each of the evaluated systems. These systems include one binary miscibility gap in the hydrocarbon + water subsystem and another one can be in the methanol + hydrocarbon subsystem. The binary tie lines were compared with the recommended values published previously.

  10. The effect of aliphatic carboxylic acids on olfaction-based host-seeking of the malaria mosquito Anopheles gambiae sensu stricto

    NARCIS (Netherlands)

    Smallegange, R.C.; Qiu, Y.T.; Bukovinszkine-Kiss, G.; Loon, van J.J.A.; Takken, W.

    2009-01-01

    The role of aliphatic carboxylic acids in host-seeking response of the malaria mosquito Anopheles gambiae sensu stricto was examined both in a dual-choice olfactometer and with indoor traps. A basic attractive blend of ammonia + lactic acid served as internal standard odor. Single carboxylic acids w

  11. Synthesis and characterization of soluble, blue-fluorescent polyamides and polyimides containing substituted p-terphenyl as well as long aliphatic segments in the main chain

    NARCIS (Netherlands)

    Mikroyannidis, JA; Tsivgoulis, GM

    1999-01-01

    A novel class of semiflexible polyamides and polyimides bearing substituted p-terphenyl as well as long aliphatic segments in the main chain were synthesized through pyrylium salts. Characterization of polymers was accomplished by inherent viscosity, elemental analysis, FT-IR, NMR, UV-vis luminescen

  12. Structural criteria for the rational design of selective ligands. Extension of the MM3 force field to aliphatic ether complexes of the alkali and alkaline earth cations

    Energy Technology Data Exchange (ETDEWEB)

    Hay, B.P.; Rustad, J.R. (Pacific Northwest Lab., Richland, WA (United States))

    1994-07-13

    Structural requirements for strain-free metal ion complexation by an aliphatic ether group are investigated through the use of both ab initio molecular orbital and molecular mechanics calculations. Hartree-Fock calculations on simple models, M-O(Me)[sub 2] and M-O(Me)(Et), reveal a preference for trigonal planar geometry when aliphatic ether oxygens are coordinated to alkali and alkaline earth cations. This preference is found to be strongest in small, high-valent cations and weakest in large, low-valent cations. Results from the Hartree-Fock calculations are used to extend the MM3 force field for calculation on aliphatic ether complexes with the alkali (Li to Cs) and alkaline earth (Mg to Ba) cations. The resulting molecular model (i) reproduces the experimental crystal structures of 51 different complexes of multidentate ethers with alkali and alkaline earth cations, (ii) explains experimental trends in the structure of five-membered chelate rings of aliphatic ethers, (iii) reveals a fundamental difference between the metal ion size selectivity of five-membered chelate rings of ethers versus that of amines, and (iv) rationalizes trends in the stability of four potassium complexes with the diasteriomers of dicyclohexyl-18-crown-6. 40 refs., 9 figs., 5 tabs.

  13. 脂肪族聚碳酸酯及其在医学中的应用%Progress of Aliphatic Polycarbonates and their Applications in the Biomedical Field

    Institute of Scientific and Technical Information of China (English)

    周瑜; 刘芝兰; 陈红祥

    2011-01-01

    During the past decade,aliphatic polycarbonates have been widely studied and used in the biomedical field,because they are biocompatible,biodegradable and able to functionalization.In this article,combining with the authors' work and referring to the research status about biodegradable aliphatic polycarbonates at home and abroad,aliphatic polycarbonates were sorted according to the structure of polymer chains and also introduced briefly.Their synthetic methods and applications in the biomedical field were reviewed.In addition,the future development of aliphatic polycarbonates was also put forward.%脂肪族聚碳酸酯具有优良的生物降解性、生物相容性和可功能化性等特点,近十几年来在生物医学领域得到了迅速发展。结合本实验室对生物可降解脂肪族聚碳酸酯的研究工作以及国内外研究现状,根据高分子链的几何形状对脂肪族聚碳酸酯进行了分类介绍,综述了它们的合成方法及其在生物医学领域中的应用,同时展望了脂肪族聚碳酸酯的未来发展趋势。

  14. A Quantitative Structure-Property Relationship (QSPR Study of Aliphatic Alcohols by the Method of Dividing the Molecular Structure into Substructure

    Directory of Open Access Journals (Sweden)

    Bin Cheng

    2011-04-01

    Full Text Available A quantitative structure–property relationship (QSPR analysis of aliphatic alcohols is presented. Four physicochemical properties were studied: boiling point (BP, n-octanol–water partition coefficient (lg POW, water solubility (lg W and the chromatographic retention indices (RI on different polar stationary phases. In order to investigate the quantitative structure–property relationship of aliphatic alcohols, the molecular structure ROH is divided into two parts, R and OH to generate structural parameter. It was proposed that the property is affected by three main factors for aliphatic alcohols, alkyl group R, substituted group OH, and interaction between R and OH. On the basis of the polarizability effect index (PEI, previously developed by Cao, the novel molecular polarizability effect index (MPEI combined with odd-even index (OEI, the sum eigenvalues of bond-connecting matrix (SX1CH previously developed in our team, were used to predict the property of aliphatic alcohols. The sets of molecular descriptors were derived directly from the structure of the compounds based on graph theory. QSPR models were generated using only calculated descriptors and multiple linear regression techniques. These QSPR models showed high values of multiple correlation coefficient (R > 0.99 and Fisher-ratio statistics. The leave-one-out cross-validation demonstrated the final models to be statistically significant and reliable.

  15. A novel chiral aliphatic-aromatic diamine promoted direct, highly enantio- and diastereoselective Michael addition of cyclohexanone to nitroolefins under solvent-free conditions.

    Science.gov (United States)

    Miao, Shifeng; Bai, Jinjin; Yang, Jin; Zhang, Yawen

    2010-10-01

    A series of new highly efficient chiral aliphatic-aromatic diamine catalysts have been designed and successfully applied to the asymmetric Michael addition of cyclohexanone with nitroolefins under solvent-free conditions without any acidic additives. The desired adducts were obtained in high yields with excellent enantio- and diastereoselectivities of syn products (up to >99% ee, >99:1 dr).

  16. The influence of antioxidant and post-synthetic treatment on the properties of biodegradable poly(butylene succinates modified with poly(propylene oxide

    Directory of Open Access Journals (Sweden)

    DRAGANA PEPIC

    2007-12-01

    Full Text Available Novel poly(ester–ethers based on poly(butylene succinate (PBS as the hard segments and 30 mass % of poly(propylene oxide (PPO as the soft segments were synthesized with varying amount of the antioxidant (N,N'-diphenyl-p-phenylenediamine, DPPD. The influences of the addition of DPPD and the impact of post-synthetic treatment by precipitation on the molecular structure, thermal and physical properties, as well as on the storage stability of the biodegradable aliphatic copolyesters, were investigated. The structure and composition of the copolymers were determined by means of 1H-NMR spectroscopy. The molecular weight and polydispersity of the poly(ester–ethers were evaluated from solution viscosity and GPC measurements. The thermal properties and stability were evaluated, respecttively, by means of DSC and non-isothermal thermogravimetry in an inert nitrogen atmosphere. The biodegradability potential of the polymers was studied in hydrolytic and enzymatic degradation tests with Candida cylindracea lipase by monitoring the weight loss of polymer films after incubation. The weight losses of the samples increased with time and were in the range from 1 to 5 mass % after 4 weeks. GPC analysis confirmed that there were changes in the molecular weight of the copolyesters during both hydrolytic and enzymatic degradation tests, leading to the conclusion that the degradation mechanism of poly(butylenes succinate modified with PPO occurred through surface erosion and bulk degradation.

  17. Chemical composition of pseudo-phlobaphinite precursors: implications for the presence of aliphatic biopolymers in vitrinite from coal

    Energy Technology Data Exchange (ETDEWEB)

    Etuan Zhang; Hatcher, P.G.; Davis, A. (Pennsylvania State University, University Park, PA (United States). Dept. of Materials Science and Engineering)

    1993-08-01

    Pseudo-phlobaphinite cell inclusions in a buried stem of angiospermous wood of [ital Rhizophora mangle] from Mangrove Lake, Bermuda have been investigated petrographically and chemically. Optical and scanning electron microscopy reveal that the light wood from inner sections of the stem consists predominantly of cell walls with few cell inclusions, whereas the dark wood from outer portion of the stem is composed of both cell walls and cell inclusions which are believed to represent pseudophlobaphinite precursors. [sup 13]C NMR spectroscopy reveals the presence of lignin and tannin structures within the cell walls. The wood also displays resonances suggestive of aliphatic components. The NMR results are further supplemented and confirmed by flash pyrolysis gas chromatography and mass spectrometry analyses. The pyrogram of the cell-wall dominated light wood is characterized by peaks related to both syringyl and guaiacyl units. The major pyrolysis products from the dark wood, however, are a homologous series of long-chain n-alkanes, n-alk-l-enes and [alpha],[omega]-alkadienes extending from chain length C[sub 10] to C[sub 30]. These aliphatic components arise from the material associated with the pseudophlobaphinite cell inclusions. Py-gc/ms analysis of a humic acid extracted from the sediments surrounding the studied wood consists almost exclusively of a homologous series of straight-chain alkanes, alkenes and alkadienes up to C[sub 30]. The striking resemblance between programs of the pseudo-phlobaphinite precursor and humic acid suggests that the possible mechanism for the formation of the pseudo-phlobaphinite is migration and deposition of humic acid into cell lumina. 72 refs., 5 figs., 1 tab.

  18. Aliphatic peptides show similar self-assembly to amyloid core sequences, challenging the importance of aromatic interactions in amyloidosis.

    Science.gov (United States)

    Lakshmanan, Anupama; Cheong, Daniel W; Accardo, Angelo; Di Fabrizio, Enzo; Riekel, Christian; Hauser, Charlotte A E

    2013-01-01

    The self-assembly of abnormally folded proteins into amyloid fibrils is a hallmark of many debilitating diseases, from Alzheimer's and Parkinson diseases to prion-related disorders and diabetes type II. However, the fundamental mechanism of amyloid aggregation remains poorly understood. Core sequences of four to seven amino acids within natural amyloid proteins that form toxic fibrils have been used to study amyloidogenesis. We recently reported a class of systematically designed ultrasmall peptides that self-assemble in water into cross-β-type fibers. Here we compare the self-assembly of these peptides with natural core sequences. These include core segments from Alzheimer's amyloid-β, human amylin, and calcitonin. We analyzed the self-assembly process using circular dichroism, electron microscopy, X-ray diffraction, rheology, and molecular dynamics simulations. We found that the designed aliphatic peptides exhibited a similar self-assembly mechanism to several natural sequences, with formation of α-helical intermediates being a common feature. Interestingly, the self-assembly of a second core sequence from amyloid-β, containing the diphenylalanine motif, was distinctly different from all other examined sequences. The diphenylalanine-containing sequence formed β-sheet aggregates without going through the α-helical intermediate step, giving a unique fiber-diffraction pattern and simulation structure. Based on these results, we propose a simplified aliphatic model system to study amyloidosis. Our results provide vital insight into the nature of early intermediates formed and suggest that aromatic interactions are not as important in amyloid formation as previously postulated. This information is necessary for developing therapeutic drugs that inhibit and control amyloid formation. PMID:23267112

  19. Progresses in Research of Aliphatic Polycarbonates%脂肪族聚碳酸酯的研究进展

    Institute of Scientific and Technical Information of China (English)

    刘峰; 翟刚; 李建国; 刘绍英; 杨先贵; 王公应

    2013-01-01

    综述了通过环氧化物与CO2共聚法、脂肪族环状碳酸酯开环聚合法及脂肪族二元醇与碳酸二烃基酯聚合法合成脂肪族聚碳酸酯(APCs)的研究进展,特别是对各种反应体系所采用催化剂的突破性研究成果进行了介绍,并对反应机理进行了分析.讨论了APCs的结构与其生物降解性及热分解性等性能的关系;结合APCs的性质介绍了它在医用材料、陶瓷及橡胶工业等领域的应用.比较了合成APCs的不同途径的特点,并对APCs材料的合成方法及其应用的发展趋势进行了展望.%The catalysts for the synthesis of aliphatic polycarbonates(APCs) were summarized according to three reaction systems,namely the copolymerization of carbon dioxide with epoxides,the ring-opening polymerization of cyclic carbonates and the two-step polycondensation of dialkyl carbonates and aliphatic diols.Particularly,the new research achievements for the catalysts and the mechanism of the reactions were introduced.The relationship between the structures and the performances of APCs,such as biodegradability and thermal decomposition,were discussed.The applications of APCs in medical materials,ceramics,rubber industry and so on were introduced.The synthesis of APCs by different methods were analyzed briefly.The development trend of APCs in future was forecasted.

  20. Proposed chemical mechanisms leading to secondary organic aerosol in the reactions of aliphatic amines with hydroxyl and nitrate radicals

    Science.gov (United States)

    Price, Derek J.; Clark, Christopher H.; Tang, Xiaochen; Cocker, David R.; Purvis-Roberts, Kathleen L.; Silva, Philip J.

    2014-10-01

    The presence and importance of amines in the atmosphere, including aliphatic amines, continues to gain more attention. The atmospheric reaction mechanisms of these amines with key atmospheric radicals are important to predict both daytime and nighttime atmospheric chemistry. While previous studies have focused on the production of amine salts, this analysis looks at the importance of peroxy radical reactions to the formation of secondary organic aerosol. Atmospheric oxidation mechanisms are presented to explain the observed chemistry. A series of environmental chamber experiments were conducted in which aliphatic tertiary and secondary amines were reacted with either hydroxyl radical (OH) or nitrate radical (NO3). Chemical composition of the aerosol products was obtained with a High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS) and a Particle Into Liquid Sampler Time of Flight Mass Spectrometer (PILS-ToF-MS), while the chemical composition of the gas-phase products was obtained with a Selected Ion Flow Tube Mass Spectrometer (SIFT-MS). A number of aerosol-phase mass spectra showed highly oxidized fragments at a much higher molecular weight (MW) than the amine precursor. It is proposed that these larger compounds are oligomers formed through peroxy radical reactions with hydrogen rearrangement. Another reaction pathway observed was the formation of amine salts. The relative importance of each pathway to the overall production of aerosol is found to be dependent on the type of amine and oxidant. For example, the oligomers were observed in the tertiary methyl amines, while the formation of amine salts was more prevalent in the secondary and tertiary ethyl amines.

  1. Carbon-rich dust past the asymptotic giant branch: Aliphatics, aromatics, and fullerenes in the Magellanic Clouds

    Energy Technology Data Exchange (ETDEWEB)

    Sloan, G. C.; Lagadec, E. [Center for Radiophysics and Space Research, Cornell University, Ithaca, NY 14853-6801 (United States); Zijlstra, A. A. [Jodrell Bank Centre for Astrophysics, University of Manchester, Manchester M13 9PL (United Kingdom); Kraemer, K. E. [Institute for Scientific Research, Boston College, 140 Commonwealth Avenue, Chestnut Hill, MA 02467 (United States); Weis, A. P. [Department of Astronomy and Astrophysics, Columbia University, 550 West 120th Street, New York, NY 10027 (United States); Matsuura, M. [Astrophysics Group, Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT (United Kingdom); Volk, K. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Peeters, E.; Cami, J. [Department of Physics and Astronomy, University of Western Ontario, London, ON N6A 3K7 (Canada); Duley, W. W. [Department of Physics and Astronomy, University of Waterloo, 200 University Avenue West, Waterloo, ON N2L 3G1 (Canada); Bernard-Salas, J. [Department of Physical Sciences, The Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom); Kemper, F. [Academia Sinica, Institute of Astronomy and Astrophysics, 11F Astronomy-Mathematics Building, NTU/AS, No. 1, Sec. 4, Roosevelt Road, Taipei 10617, Taiwan, R.O.C (China); Sahai, R., E-mail: sloan@isc.astro.cornell.edu [Jet Propulsion Laboratory, MS 183-900, California Institute of Technology, Pasadena, CA 91109 (United States)

    2014-08-10

    Infrared spectra of carbon-rich objects that have evolved off the asymptotic giant branch reveal a range of dust properties, including fullerenes, polycyclic aromatic hydrocarbons (PAHs), aliphatic hydrocarbons, and several unidentified features, including the 21 μm emission feature. To test for the presence of fullerenes, we used the position and width of the feature at 18.7-18.9 μm and examined other features at 17.4 and 6-9 μm. This method adds three new fullerene sources to the known sample, but it also calls into question three previous identifications. We confirm that the strong 11 μm features seen in some sources arise primarily from SiC, which may exist as a coating around carbonaceous cores and result from photo-processing. Spectra showing the 21 μm feature usually show the newly defined Class D PAH profile at 7-9 μm. These spectra exhibit unusual PAH profiles at 11-14 μm, with weak contributions at 12.7 μm, which we define as Class D1, or show features shifted to ∼11.4, 12.4, and 13.2 μm, which we define as Class D2. Alkyne hydrocarbons match the 15.8 μm feature associated with 21 μm emission. Sources showing fullerene emission but no PAHs have blue colors in the optical, suggesting a clear line of sight to the central source. Spectra with 21 μm features and Class D2 PAH emission also show photometric evidence for a relatively clear line of sight to the central source. The multiple associations of the 21 μm feature with aliphatic hydrocarbons suggest that the carrier is related to this material in some way.

  2. Surface reliefs on diacrylate monomer films by spatially controlled UV photopolymerization

    International Nuclear Information System (INIS)

    The non-uniform ultraviolet (UV) photopolymerization of acrylic films allows the formation of surface reliefs through a self-developing process. The parameters that influence the growth of the reliefs for polymer films made of bis-phenol-A-diglycidil-ether diacrylate (BGEDA), an aliphatic polyurethane diacrylate and an aromatic polyurethane diacrylate, mixed with tri-propylen-glycol diacrylate as promoter, have been investigated. The results show that the time of photopolymerization, the after-curing self-developing time, the mixture composition and the polymer film thickness influence the relief development in a complex way. The behaviours of the different monomers were explained on the basis of two main factors: the properties of the polymeric network and the diffusion phenomena which take place in the polymer bulk

  3. Two-dimensional inorganic–organic hybrid semiconductors composed of double-layered ZnS and monoamines with aromatic and heterocyclic aliphatic rings: Syntheses, structures, and properties

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Sujing; Li, Jing, E-mail: jingli@rutgers.edu

    2015-04-15

    As an addition to the II–VI based inorganic–organic hybrid semiconductor family, five new two-dimensional (2D) double-layered structures have been synthesized employing monoamines with different aromatic or heterocyclic aliphatic rings. Zn{sub 2}S{sub 2}(bza) (1), Zn{sub 2}S{sub 2}(mbza) (2), Zn{sub 2}S{sub 2}(fbza) (3), Zn{sub 2}S{sub 2}(pca) (4), and Zn{sub 2}S{sub 2}(thfa) (5) (bza=benzylamine, mbza=4-methoxybenzylamine, fbza=4-flurobenzylamine, pca=3-picolylamine, and thfa=tetrahydrofurfurylamine) are prepared by solvothermal reactions and characterized by different analytical methods, including powder X-ray diffraction, optical diffuse reflection, thermogravimetric analysis and photoluminescence spectroscopy. The powder X-ray diffraction patterns show that all five compounds adopt 2D double-layered structures. Optical diffuse reflectance spectra of these compounds suggest that they have notably lower band gaps than those of the similar compounds composed of aliphatic alkyl amines. Their photoluminescence properties and thermal stability are also analyzed. - Graphical abstract: Five new members of two-dimensional double-layered 2D-Zn{sub 2}S{sub 2}(L) (L=Ligand) structures employing monoamines with different aromatic or heterocyclic aliphatic rings have been designed, synthesized, and characterized. - Highlights: • A new sub-family of II-VI based hybrid semiconductors are designed, synthesized, and structurally characterized using amines with aromatic or aliphatic cyclic rings. • These compounds have notably lower band gaps than those made of aliphatic alkyl amines, greatly broadening the range of band gaps of this material family. • They emit strongly with systematically tunable emission intensity and energy.

  4. A rapid and sensitive method for the simultaneous analysis of aliphatic and polar molecules containing free carboxyl groups in plant extracts by LC-MS/MS

    Directory of Open Access Journals (Sweden)

    Bonaventure Gustavo

    2009-11-01

    Full Text Available Abstract Background Aliphatic molecules containing free carboxyl groups are important intermediates in many metabolic and signalling reactions, however, they accumulate to low levels in tissues and are not efficiently ionized by electrospray ionization (ESI compared to more polar substances. Quantification of aliphatic molecules becomes therefore difficult when small amounts of tissue are available for analysis. Traditional methods for analysis of these molecules require purification or enrichment steps, which are onerous when multiple samples need to be analyzed. In contrast to aliphatic molecules, more polar substances containing free carboxyl groups such as some phytohormones are efficiently ionized by ESI and suitable for analysis by LC-MS/MS. Thus, the development of a method with which aliphatic and polar molecules -which their unmodified forms differ dramatically in their efficiencies of ionization by ESI- can be simultaneously detected with similar sensitivities would substantially simplify the analysis of complex biological matrices. Results A simple, rapid, specific and sensitive method for the simultaneous detection and quantification of free aliphatic molecules (e.g., free fatty acids (FFA and small polar molecules (e.g., jasmonic acid (JA, salicylic acid (SA containing free carboxyl groups by direct derivatization of leaf extracts with Picolinyl reagent followed by LC-MS/MS analysis is presented. The presence of the N atom in the esterified pyridine moiety allowed the efficient ionization of 25 compounds tested irrespective of their chemical structure. The method was validated by comparing the results obtained after analysis of Nicotiana attenuata leaf material with previously described analytical methods. Conclusion The method presented was used to detect 16 compounds in leaf extracts of N. attenuata plants. Importantly, the method can be adapted based on the specific analytes of interest with the only consideration that the

  5. Lamellar organic thin films through self-assembly and molecular recognition

    OpenAIRE

    Holder, Simon J.; Elemans, Johannes A. A. W.; Donners, J.M.; Boerakker, Mark J.; Gelder, R. de; Barbera, J.; Rowan, Alan E.; Nolte, Roeland J. M.

    2001-01-01

    Molecular clips possessing U-shaped cavities have been functionalized on their convex side with long aliphatic tails. These molecules form dimers which self-assemble into malleable lamellar thin films. Upon addition of a guest (methyl 3,5-dihydroxybenzoate), a 1:1 host-guest complex is formed, which prohibits clip dimerization. As a result, the lamellar structure of the material is lost. Complexation of 3,5-dihydroxybenzoic acid in the clip results in host-guest complexes which dimerize by hy...

  6. Film Credits

    Science.gov (United States)

    Borja, Rhea R.

    2006-01-01

    With the advent of easy-to-use digital technology, schools are responding to the interests of their media-savvy students by offering more courses in filmmaking. In this article, the author features different films produced by students. Among other things, she discusses the students' growing interest in filmmaking.

  7. A Convenient Method for Preparation of Aliphatic Methyl Ketones%带有脂肪链取代基的甲基酮的简便合成方法

    Institute of Scientific and Technical Information of China (English)

    杨小波; 尹健; 陈再新; 张奕华

    2005-01-01

      报道了一种简便有效、经济的合成含有脂肪链取代基的甲基酮的方法,尤其是对于合成带有高级脂肪链取代基的甲基酮。本方法具有工业应用价值。%  A convenient, efficient and economical method for preparation of aliphatic methyl ketones, especially of high aliphatic methyl ketones by using aliphatic acid chlorides and diethyl malonate as starting material was described. It is possible to develop this method for industrial application.

  8. Aliphatic acetogenin constituents of avocado fruits inhibit human oral cancer cell proliferation by targeting the EGFR/RAS/RAF/MEK/ERK1/2 pathway

    Energy Technology Data Exchange (ETDEWEB)

    D' Ambrosio, Steven M. [Department of Radiology, College of Medicine, The Ohio State University, Columbus, OH 43210 (United States); Comprehensive Cancer Center, The Ohio State University, Columbus, OH 43210 (United States); Han, Chunhua [Department of Radiology, College of Medicine, The Ohio State University, Columbus, OH 43210 (United States); Pan, Li; Douglas Kinghorn, A. [Division of Medicinal Chemistry and Pharmacognosy, College of Pharmacy, The Ohio State University, Columbus, OH 43210 (United States); Ding, Haiming, E-mail: ding.29@osu.edu [Department of Radiology, College of Medicine, The Ohio State University, Columbus, OH 43210 (United States)

    2011-06-10

    Highlights: {yields} The aliphatic acetogenins [(2S,4S)-2,4-dihydroxyheptadec-16-enyl acetate] (1) and [(2S,4S)-2,4-dihydroxyheptadec-16-ynyl acetate] (2) isolated from avocado fruit inhibit phosphorylation of c-RAF (Ser338) and ERK1/2 (Thr202/Tyr204). {yields} Aliphatic acetogenin 2, but not 1, prevents EGF-induced activation of EGFR (Tyr1173). {yields} Combination of both aliphatic acetogenins synergistically inhibits c-RAF (Ser338) and ERK1/2 (Thr202/Tyr204) phosphorylation and human oral cancer cell proliferation. {yields} The potential anticancer activity of avocado fruits is due to a combination of specific aliphatic acetogenins targeting two key components of the EGFR/RAS/RAF/MEK/ERK1/2 cancer pathway. {yields} Providing a double hit on a critical cancer pathway such as EGFR/RAS/RAF/MEK/ERK1/2 by phytochemicals like those found in avocado fruit could lead to more effective approach toward cancer prevention. -- Abstract: Avocado (Persea americana) fruits are consumed as part of the human diet and extracts have shown growth inhibitory effects in various types of human cancer cells, although the effectiveness of individual components and their underlying mechanism are poorly understood. Using activity-guided fractionation of the flesh of avocado fruits, a chloroform-soluble extract (D003) was identified that exhibited high efficacy towards premalignant and malignant human oral cancer cell lines. From this extract, two aliphatic acetogenins of previously known structure were isolated, compounds 1 [(2S,4S)-2,4-dihydroxyheptadec-16-enyl acetate] and 2 [(2S,4S)-2,4-dihydroxyheptadec-16-ynyl acetate]. In this study, we show for the first time that the growth inhibitory efficacy of this chloroform extract is due to blocking the phosphorylation of EGFR (Tyr1173), c-RAF (Ser338), and ERK1/2 (Thr202/Tyr204) in the EGFR/RAS/RAF/MEK/ERK1/2 cancer pathway. Compounds 1 and 2 both inhibited phosphorylation of c-RAF (Ser338) and ERK1/2 (Thr202/Tyr204). Compound 2, but not

  9. Aliphatic acetogenin constituents of avocado fruits inhibit human oral cancer cell proliferation by targeting the EGFR/RAS/RAF/MEK/ERK1/2 pathway

    International Nuclear Information System (INIS)

    Highlights: → The aliphatic acetogenins [(2S,4S)-2,4-dihydroxyheptadec-16-enyl acetate] (1) and [(2S,4S)-2,4-dihydroxyheptadec-16-ynyl acetate] (2) isolated from avocado fruit inhibit phosphorylation of c-RAF (Ser338) and ERK1/2 (Thr202/Tyr204). → Aliphatic acetogenin 2, but not 1, prevents EGF-induced activation of EGFR (Tyr1173). → Combination of both aliphatic acetogenins synergistically inhibits c-RAF (Ser338) and ERK1/2 (Thr202/Tyr204) phosphorylation and human oral cancer cell proliferation. → The potential anticancer activity of avocado fruits is due to a combination of specific aliphatic acetogenins targeting two key components of the EGFR/RAS/RAF/MEK/ERK1/2 cancer pathway. → Providing a double hit on a critical cancer pathway such as EGFR/RAS/RAF/MEK/ERK1/2 by phytochemicals like those found in avocado fruit could lead to more effective approach toward cancer prevention. -- Abstract: Avocado (Persea americana) fruits are consumed as part of the human diet and extracts have shown growth inhibitory effects in various types of human cancer cells, although the effectiveness of individual components and their underlying mechanism are poorly understood. Using activity-guided fractionation of the flesh of avocado fruits, a chloroform-soluble extract (D003) was identified that exhibited high efficacy towards premalignant and malignant human oral cancer cell lines. From this extract, two aliphatic acetogenins of previously known structure were isolated, compounds 1 [(2S,4S)-2,4-dihydroxyheptadec-16-enyl acetate] and 2 [(2S,4S)-2,4-dihydroxyheptadec-16-ynyl acetate]. In this study, we show for the first time that the growth inhibitory efficacy of this chloroform extract is due to blocking the phosphorylation of EGFR (Tyr1173), c-RAF (Ser338), and ERK1/2 (Thr202/Tyr204) in the EGFR/RAS/RAF/MEK/ERK1/2 cancer pathway. Compounds 1 and 2 both inhibited phosphorylation of c-RAF (Ser338) and ERK1/2 (Thr202/Tyr204). Compound 2, but not compound 1, prevented EGF

  10. Film and History.

    Science.gov (United States)

    Schaber, Robin L.

    2002-01-01

    Provides an annotated bibliography of Web sites that focus on using film to teach history. Includes Web sites in five areas: (1) film and education; (2) history of cinema; (3) film and history resources; (4) film and women; and (5) film organizations. (CMK)

  11. Effectiveness of a Prudhoe Bay crude oil and its aliphatic, aromatic and heterocyclic fractions in inducing mortality and aryl hydrocarbon hydroxylase in chick embryo in ovo

    Energy Technology Data Exchange (ETDEWEB)

    Walters, P.; Khan, S.; O' Brien, P.J.O.; Rahimtula, A.T.; Payne, J.F.

    1987-08-01

    Prudhoe Bay crude oil (PBCO) and its aliphatic, aromatic and heterocyclic fractions were tested on the developing chick embryo for (i) embryotoxicity (ii) their ability to induce hepatic and renal cytochrome P450 levels as well as hepatic, renal and pulmonary aryl hydrocarbon hydroxylase activities. On the basis of its concentration in PBCO, the aromatic fraction was responsible for most of the embryotoxicity as well as for the enzyme inducing ability. The NOS fraction constituted less than 7% (w/v) of PbCO but, on a weight equivalent basis, was roughly as potent as the aromatic fraction in causing embryotoxicity and in inducing cytochrome P450 levels and aryl hydrocarbon hydroxylase. The aliphatic fraction was found to be essentially inactive. The results are consistent with the concept that elevation of aryl hydrocarbon hydroxylase levels by certain components of PBCO may lead to increased embroyotoxicity.

  12. Fenton process for degradation of selected chlorinated aliphatic hydrocarbons exemplified by trichloroethylene, 1,1-dichloroethylene and chloroform

    Institute of Scientific and Technical Information of China (English)

    Zhimin QIANG; Weiwei BEN; ChinPao HUANG

    2008-01-01

    The degradation of selected chlorinated ali-phatic hydrocarbons (CAHs) exemplified by trichloroethy-lene (TCE), 1,1-dichloroethylene (DCE), and chloroform (CF) was investigated with Fenton oxidation process. The results indicate that the degradation rate was primarily affected by the chemical structures of organic contami-nants. Hydroxyl radicals (·OH) preferred to attack the organic contaminants with an electron-rich structure such as chlorinated alkenes (i.e., TCE and DCE). The dosing mode of Fenton's reagent, particularly of Fe2+, significantly affected the degradation efficiency of studied organic compound. A new "time-squared" kinetic model, C = Coexp(-kobst2), was developed to express the degrada-tion kinetics of selected CAHs. This model was applicable to TCE and DCE, but inapplicable to CF due to their varied reaction rate constants towards ·OH. Chloride release was monitored to examine the degree of dechlorina- tion during the oxidation of selected CAHs. TCE was more easily dechlorinated than DCE and CF. Dichloroacetic acid (DCAA) was identified as the major reaction intermediate in the oxidation of TCE, which could be completely removed as the reaction proceeded. No reaction intermedi- ates or byproducts were identified in the oxidation of DCE and CF. Based on the identified intermediate, the reaction mechanism of TCE with Fenton's reagent was proposed.

  13. Synthesis of nanomagnetic fluids and their UV spectrophotometric response with aliphatic organic acids and 1st tier dendrimers

    Science.gov (United States)

    Pandya, Shivani R.; Singh, Man

    2016-04-01

    Synthesis of Magnetic nanoparticles were made using coprecipitation method on mixing Fe+3 and Fe+2 in 2:1 ratio with aqueous 8M NaOH which on heating at 90°C for 2 h has yielded 85% magnetic (Fe3O4) nanoparticles (MNPs), characterized by XRD, VSM, SEM, and HR-TEM. The formic acid (FA), oxalic acid (OA) and citric acid (CA), the series of aliphatic organic acids along with Trimesoyl 1, 3, 5 tridimethyl malonate (TTDMM), trimesoyl 1, 3, 5 tridiethyl malonate (TTDEM), trimesoyl 1, 3, 5 tridipropyl malonate (TTDPM), trimesoyl 1, 3, 5 tridibutyl malonate (TTDBM) and trimesoyl 1, 3, 5 tridihexyl malonate (TTDHM) 1st tier dendrimers were used separately for preparing nanomagnetic fluid. From 25 to 150 µM MNPs at an interval of 25 µM were dispersed in 150 µM of acids and dendrimers separately with DMSO. UV-VIS spectrophotometry showed a maximum MNPs dispersion with TTDMM against others and found to be most stable nanomagnetic fluid on account of capping type mechanism of acids.

  14. Aliphatic hydrocarbon levels in turbot and salmon farmed close to the site of the Aegean Sea oil spill

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Pineiro, M.E. [Institute of Investigation and Food Analysis, La Coruna (Spain); Gonzalez-Barros, S.T.C.; Lozano, J.S. [Area Nutrition and Bromatology, La Coruna (Spain)] [and others

    1996-12-31

    After the Andros Patria oil spill, the most serious oil tanker accident to occur off the coast of Galicia (N.W. Spain) was the running aground and subsequent conflagration of the Aegean Sea supertanker outside the northern Spanish port of La Coruna (December 3rd 1992). Approximately 60,000 tonnes of Brent oil were spilled into the Atlantic Ocean in the cited coastal region. Subsequently, an impropitious combination of a high tide and a change in wind direction caused the resulting slick to rapidly spread into the port. Measures aimed at cleaning up affected areas and evacuating the ca. 11,215 tonnes of oil remaining in the supertanker were immediately implemented. However, within just a few days the resulting contamination had killed some 15000 turbot juveniles and larvae, which are cultivated in fish farms close to the accident site. The environmental impact of major oil spillages has been widely studied. Several scientists have suggested that, in terms of the negative effects on the seawater quality and productive capacity of the affected maritime regions, the magnitudes of the Aegean Sea and Amoco Cadiz accidents are comparable. This paper reports variations over time of aliphatic hydrocarbon levels in turbot and Atlantic salmon sampled from fish farms close to the site of the Aegean Sea oil spill. 6 refs., 2 figs., 1 tab.

  15. FTIR and molecular mechanics studies of H-bonds in aliphatic polyurethane and polyamide-66 model molecules

    Science.gov (United States)

    Wang, Guoqing; Zhang, Chunxia; Guo, Xiaohe; Ren, Zhiyong

    2008-02-01

    Model aliphatic polyurethane (APU) hard segment based on 1,6-hexamethylene diisocyanate (HDI) and 1,4-butanediol (BDO) were prepared. FTIR and molecular mechanics (MM) simulation were used to conduct the systematic studies on APU and polyamide-66 (PA-66) whose sole difference lies in the alkoxyl oxygen. It was found that the introduction of the alkoxyl not only increases the conformations in APU, makes it a possible H-bond acceptor, but also weakens the H-bond between NH and O dbnd C in APU. There are two conformers stably existed in APU with lowest energy, leading to eight H-bond complexes based on NH as donor and (1) O dbnd C as acceptor, and another two complexes based on (2) alkoxyl O and (3) urethane N as acceptors, whereas there is only one stable conformer in PA-66, leading to one H-bond complex. One predominant H-bond complex has been found in APU with probability of about 95%. The simulated results are consistent with the νNH and νC dbnd O band shifting in FTIR.

  16. Preliminary chemical analysis and biological testing of materials from the HRI catalytic two-stage liquefaction (CTSL) process. [Aliphatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Later, D.W.; Wilson, B.W.

    1985-01-01

    Coal-derived materials from experimental runs of Hydrocarbon Research Incorporated's (HRI) catalytic two-stage liquefaction (CTSL) process were chemically characterized and screened for microbial mutagenicity. This process differs from two-stage coal liquefaction processes in that catalyst is used in both stages. Samples from both the first and second stages were class-fractionated by alumina adsorption chromatography. The fractions were analyzed by capillary column gas chromatography; gas chromatography/mass spectrometry; direct probe, low voltage mass spectrometry; and proton nuclear magnetic resonance spectrometry. Mutagenicity assays were performed with the crude and class fractions in Salmonella typhimurium, TA98. Preliminary results of chemical analyses indicate that >80% CTSL materials from both process stages were aliphatic hydrocarbon and polynuclear aromatic hydrocarbon (PAH) compounds. Furthermore, the gross and specific chemical composition of process materials from the first stage were very similar to those of the second stage. In general, the unfractionated materials were only slightly active in the TA98 mutagenicity assay. Like other coal liquefaction materials investigated in this laboratory, the nitrogen-containing polycyclic aromatic compound (N-PAC) class fractions were responsible for the bulk of the mutagenic activity of the crudes. Finally, it was shown that this activity correlated with the presence of amino-PAH. 20 figures, 9 tables.

  17. Chemical and morphological characterization of soot and soot precursors generated in an inverse diffusion flame with aromatic and aliphatic fuels

    Energy Technology Data Exchange (ETDEWEB)

    Santamaria, Alexander; Mondragon, Fanor [Institute of Chemistry, University of Antioquia, AA 1226, Medellin (Colombia); Yang, Nancy [Sandia National Laboratories, Livermore, CA 94551-0969 (United States); Eddings, Eric [Department of Chemical Engineering, University of Utah, Salt Sake City, UT 84112 (United States)

    2010-01-15

    Knowledge of the chemical and physical structure of young soot and its precursors is very useful in understanding the paths leading to soot particle inception. This paper presents chemical and morphological characterization of the products generated in ethylene and benzene inverse diffusion flames (IDF) using different analytical techniques. The trend in the data indicates that the soot precursor material and soot particles generated in the benzene IDF have a higher degree of complexity than the samples obtained in the ethylene IDF, which is reflected by an increase in the aromaticity of the chloroform extracts observed by {sup 1}H NMR and FT-IR, and shape and size of soot particles obtained by TEM and HR-TEM. It is important to highlight that the soot precursor material obtained at the lower positions in the ethylene IDF has a significant contribution of aliphatic groups, which play an important role in the particle inception and mass growth processes during the early stages of soot formation. However, these groups progressively disappear in the samples taken at higher positions in the flame, due to thermal decomposition processes. (author)

  18. Controlled oxidation of aliphatic CH bonds in metallo-monooxygenases: mechanistic insights derived from studies on deuterated and fluorinated hydrocarbons.

    Science.gov (United States)

    Chen, Yao-Sheng; Luo, Wen-I; Yang, Chung-Ling; Tu, Yi-Jung; Chang, Chun-Wei; Chiang, Chih-Hsiang; Chang, Chi-Yao; Chan, Sunney I; Yu, Steve S-F

    2014-05-01

    The control over the regio- and/or stereo-selective aliphatic CH oxidation by metalloenzymes is of great interest to scientists. Typically, these enzymes invoke host-guest chemistry to sequester the substrates within the protein pockets, exploiting sizes, shapes and specific interactions such as hydrogen-bonding, electrostatic forces and/or van der Waals interactions to control the substrate specificity, regio-specificity and stereo-selectivity. Over the years, we have developed a series of deuterated and fluorinated variants of these hydrocarbon substrates as probes to gain insights into the controlled CH oxidations of hydrocarbons facilitated by these enzymes. In this review, we illustrate the application of these designed probes in the study of three monooxygenases: (i) the particulate methane monooxygenase (pMMO) from Methylococcus capsulatus (Bath), which oxidizes straight-chain C1-C5 alkanes and alkenes to form their corresponding 2-alcohols and epoxides, respectively; (ii) the recombinant alkane hydroxylase (AlkB) from Pseudomonas putida GPo1, which oxidizes the primary CH bonds of C5-C12 linear alkanes; and (iii) the recombinant cytochrome P450 from Bacillus megaterium, which oxidizes C12-C20 fatty acids at the ω-1, ω-2 or ω-3 CH positions.

  19. Carbon-rich dust past the asymptotic giant branch: aliphatics, aromatics, and fullerenes in the Magellanic Clouds

    CERN Document Server

    Sloan, G C; Zijlstra, A A; Kraemer, K E; Weis, A P; Matsuura, M; Volk, K; Peeters, E; Duley, W W; Cami, J; Bernard-Salas, J; Kemper, F; Sahai, R

    2014-01-01

    Infrared spectra of carbon-rich objects which have evolved off the asymptotic giant branch reveal a range of dust properties, including fullerenes, polycyclic aromatic hydrocarbons (PAHs), aliphatic hydrocarbons, and several unidentified features, including the 21 um emission feature. To test for the presence of fullerenes, we used the position and width of the feature at 18.7-18.9 um and examined other features at 17.4 and 6-9 um. This method adds three new fullerene sources to the known sample, but it also calls into question three previous identifications. We confirm that the strong 11 um features seen in some sources arise primarily from SiC, which may exist as a coating around carbonaceous cores and result from photo-processing. Spectra showing the 21 um feature usually show the newly defined Class D PAH profile at 7-9 um. These spectra exhibit unusual PAH profiles at 11-14 um, with weak contributions at 12.7 um, which we define as Class D1, or show features shifted to ~11.4, 12.4, and 13.2 um, which we ...

  20. Enteric polymer based on pH-responsive aliphatic polycarbonate functionalized with vitamin E to facilitate oral delivery of tacrolimus.

    Science.gov (United States)

    Wang, Menglin; Sun, Jin; Zhai, Yinglei; Lian, He; Luo, Cong; Li, Lin; Du, Yuqian; Zhang, Dong; Ding, Wenya; Qiu, Shuhong; Liu, Yuhai; Kou, Longfa; Han, Xiangfei; Xiang, Rongwu; Wang, Yongjun; He, Zhonggui

    2015-04-13

    To improve the bioavailability of orally administered drugs, we synthesized a pH-sensitive polymer (poly(ethylene glycol)-poly(2-methyl-2-carboxyl-propylene carbonate)-vitamin E, mPEG-PCC-VE) attempting to integrate the advantages of enteric coating and P-glycoprotein (P-gp) inhibition. The aliphatic polycarbonate chain was functionalized with carboxyl groups and vitamin E via postpolymerization modification. Optimized by comparison and central composite design, mPEG113-PCC32-VE4 exhibited low critical micelle concentration of 1.7 × 10(-6) mg/mL and high drug loading ability for tacrolimus (21.2% ± 2.7%, w/w). The pH-responsive profile was demonstrated by pH-dependent swelling and in vitro drug release. Less than 4.0% tacrolimus was released under simulated gastric fluid after 2.5 h, whereas an immediate release was observed under simulated intestinal fluid. The mPEG113-PCC32-VE4 micelles significantly increased the absorption of P-gp substrate tacrolimus in the whole intestine. The oral bioavailability of tacrolimus micelles was 6-fold higher than that of tacrolimus solution in rats. This enteric polymer therefore has the potential to become a useful nanoscale carrier for oral delivery of drugs.

  1. Close correlation between heat shock response and cytotoxicity in Neurospora crassa treated with aliphatic alcohols and phenols

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, U.; Schweim, P.; Fracella, F.; Rensing, L. [Univ. of Bremen (Germany)

    1995-03-01

    In Neurospora crassa the aliphatic alcohols methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, isobutanol, ethylene glycol, glycerol, and allyl alcohol and the phenolic compounds phenol, hydroquinone, resorcinol, pyrogallol, phloroglucinol, sodium salicylate, and acetylsalicylic acid were analyzed with respect to their capacities to induce heat shock proteins (HSP) and to inhibit protein synthesis. Both the alcohols and phenols showed the greatest levels of HSP induction at concentrations which inhibited the overall protein synthesis by about 50%. The abilities of the different alcohols to induce the heat shock response are proportional to their lipophilicities: the lipophilic alcohol isobutanol is maximally inductive at about 0.6 M, whereas the least lipophilic alcohol, methanol, causes maximal induction at 5.7 M. The phenols, in general, show a higher capability to induce the heat shock response. The concentrations for maximal induction range between 25 mM (sodium salicylate) and 100 mM (resorcinol). Glycerol (4.1 M) shifted the concentration necessary for maximal HSP induction by hydroquinone from 50 to 200 mM. The results reveal that the induction of HSP occurs under conditions which considerably constrain cell metabolism. The heat shock response, therefore, does not represent a sensitive marker for toxicity tests but provides a good estimate for the extent of cell damage.

  2. Matrix-assisted laser desorption/ionization mass spectrometric analysis of aliphatic biodegradable photoluminescent polymers using new ionic liquid matrices.

    Science.gov (United States)

    Serrano, Carlos A; Zhang, Yi; Yang, Jian; Schug, Kevin A

    2011-05-15

    In this study, two novel ionic liquid matrices (ILMs), N,N-diisopropylethylammonium 3-oxocoumarate and N,N-diisopropylethylammonium dihydroxymonooxoacetophenoate, were tested for the structural elucidation of recently developed aliphatic biodegradable polymers by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). The polymers, formed by a condensation reaction of three components, citric acid, octane diol, and an amino acid, are fluorescent, but the exact mechanism behind their luminescent properties has not been fully elucidated. In the original studies, which introduced the polymer class (J. Yang et al., Proc. Natl. Acad. Sci. USA 2009, 106, 10086-10091), a hyper-conjugated cyclic structure was proposed as the source for the photoluminescent behavior. With the use of the two new ILMs, we present evidence that supports the presence of the proposed cyclization product. In addition, the new ILMs, when compared with a previously established ILM, N,N-diisopropylethylammonium α-cyano-3-hydroxycinnimate, provided similar signal intensities and maintained similar spectral profiles. This research also established that the new ILMs provided good spot-to-spot reproducibility and high ionization efficiency compared with corresponding crystalline matrix preparations. Many polymer features revealed through the use of the ILMs could not be observed with crystalline matrices. Ultimately, the new ILMs highlighted the composition of the synthetic polymers, as well as the loss of water that was expected for the formation of the proposed cyclic structure on the polymer backbone.

  3. STRUCTURAL PHASE TRANSITION OF ALIPHATIC NYLONS VIEWED FROM THE WAXD/SAXS AND VIBRATIONAL SPECTRAL MEASUREMENTS AND MOLECULAR DYNAMICS CALCULATION

    Institute of Scientific and Technical Information of China (English)

    Kohji Tashiro

    2007-01-01

    The crystalline phase transition of aliphatic nylon 10/10 has been investigated on the basis of the simultaneous measurement of wide-angle and small-angle X-ray scatterings, the infrared spectral measurement and the molecular dynamics calculation. An interpretation of infrared spectra taken for a series of nylon samples and the corresponding model compounds was successfully made, allowing us to assign the infrared bands of the planar-zigzag methylene segments reasonably. As a result the methylene segmental parts of molecular chains were found to experience an order-to-disorder transition in the Brill transition region, where the intermolecular hydrogen bonds are kept alive although the bond strength becomes weaker at higher temperature. The small-angle X-ray scattering data revealed a slight change in lamellar stacking mode in the transition region. The crystal structure has been found to change more remarkably in the temperature region immediately below the melting point, where the conformationally disordered chains experienced drastic rotational and translational motions without any constraints by hydrogen bonds, and the lamellar thickness increased largely along the chain axis. These experimental results were reasonably reproduced by the molecular dynamics calculation performed at the various temperatures.

  4. Hydrogen isotope ratios of aliphatic and diterpenoid hydrocarbons in coals and carbonaceous mudstones from the Liaohe Basin, China

    Energy Technology Data Exchange (ETDEWEB)

    Tuo, J.C.; Zhang, M.F.; Wang, X.B.; Zhang, C.L. [Chinese Academy of Sciences, Lanzhou (China). Institute of Geology & Geophysics

    2006-02-15

    Hydrogen-isotope compositions of the aliphatic and diterpenoid hydrocarbons were determined for five coal and carbonaceous mudstone samples collected from drilling cores (1531-1767 m depths) in the Liaohe Basin, China. The bulk organic materials were mainly derived from terrestrial higher plants. {delta}D values for most of the n-alkanes varied from -150 parts per thousand to -220 parts per thousand, and were not significantly different among the samples. Pristane was 34-69 parts per thousand depleted in D relative to phytane; both pristane and phytane, however, had the same trend of variation in {delta}D from sample to sample.Diterpenoids were on average 49-81 parts per thousand depleted in D relative to the n-alkanes. Variations in {delta}D also occurred between different diterpenoids, indicating a different source for these compounds. An enrichment process for the heavy hydrogen isotope was observed as expected when a compound was progressively altered through diagenesis (especially the dehydrogenation process). Overall, {delta}D and {delta}-{sup 13}C showed distinct patterns between structurally different lipid classes, although possible hydrogen exchange cannot be completely excluded during maturation. Our results further support the notion that hydrogen isotopes of lipid biomarkers from ancient sediments can be used to assess the origin of the organic matter, to determine oil-source rock correlation, and perhaps to reconstruct the paleoenvironment under which the organic material was deposited.

  5. Screening and Quantification of Aliphatic Primary Alkyl Corrosion Inhibitor Amines in Water Samples by Paper Spray Mass Spectrometry.

    Science.gov (United States)

    Jjunju, Fred P M; Maher, Simon; Damon, Deidre E; Barrett, Richard M; Syed, S U; Heeren, Ron M A; Taylor, Stephen; Badu-Tawiah, Abraham K

    2016-01-19

    Direct analysis and identification of long chain aliphatic primary diamine Duomeen O (n-oleyl-1,3-diaminopropane), corrosion inhibitor in raw water samples taken from a large medium pressure water tube boiler plant water samples at low LODs (water samples was confirmed via tandem mass spectrometry using collision-induced dissociation and supported by exact mass measurement and reactive paper spray experiments using an LTQ Orbitrap Exactive instrument. Data shown herein indicate that paper spray ambient ionization can be readily used as a rapid and robust method for in situ direct analysis of polymanine corrosion inhibitors in an industrial water boiler plant and other related samples in the water treatment industry. This approach was applied for the analysis of three complex water samples including feedwater, condensate water, and boiler water, all collected from large medium pressure (MP) water tube boiler plants, known to be dosed with varying amounts of polyamine and amine corrosion inhibitor components. Polyamine chemistry is widely used for example in large high pressure (HP) boilers operating in municipal waste and recycling facilities to prevent corrosion of metals. The samples used in this study are from such a facility in Coventry waste treatment facility, U.K., which has 3 × 40 tonne/hour boilers operating at 17.5 bar. PMID:26727190

  6. Effect of the Spacer and Aliphatic Tail Length on the Conformation of “Side-on Fixed” Liquid Crystal Polyacrylates: “SANS” Experiments

    OpenAIRE

    Lecommandoux, S.; Noirez, L.; Richard, H.; Achard, M.; Strazielle, C.; Hardouin, F.

    1996-01-01

    The backbone conformation of two different “side-on fixed” liquid crystalline polyacrylates is studied by Small Angle Neutron Scattering experiments in the nematic phase. We observe the influence of a very large spacer and a large aliphatic extremities length on the prolate anisotropy of the polymer backbone. In both situations we find a strong decrease in the conformation anisotropy of the main chain.

  7. A Novel Approach in Cinnamic Acid Synthesis: Direct Synthesis of Cinnamic Acids from Aromatic Aldehydes and Aliphatic Carboxylic Acids in the Presence of Boron Tribromide

    Directory of Open Access Journals (Sweden)

    M. Onciu

    2005-02-01

    Full Text Available Cinnamic acids have been prepared in moderate to high yields by a new direct synthesis using aromatic aldehydes and aliphatic carboxylic acids, in the presence of boron tribromide as reagent, 4-dimethylaminopyridine (4-DMAP and pyridine (Py as bases and N-methyl-2-pyrolidinone (NMP as solvent, at reflux (180-190°C for 8-12 hours.

  8. Insoluble, nonhydrolyzable highly aliphatic biopolymers from algal cell walls and vascular plant cuticles and barks as sources of N-alkanes in crude oils

    Energy Technology Data Exchange (ETDEWEB)

    Tegelaar, E.W.; De Leeuw, J.E.; Horsfield, B.

    1989-03-01

    Recently discovered insoluble, nonhydrolyzable highly aliphatic biopolymers occurring in cell walls of several extant algae and in cuticles and barks of vascular plants are selectively preserved during diagenesis and represent as such, or in a slightly altered form, a considerable part of kerogens. Thermal simulation experiments performed with these isolated biopolymers of extant organisms yield series of n-alkanes with carbon number distribution patterns very similar to those of n-alkanes in natural crude oils.

  9. Molecular polarizability effect index and boiling point of aliphatic aldehydes and alkanones%分子极化效应指数与脂肪族醛酮的沸点

    Institute of Scientific and Technical Information of China (English)

    张秀利; 汪勇先; 林英武; 李俊玲

    2003-01-01

    Based on the molecular polarizabihty effect index,a formula of three parameters was proposed to calculate the boiling point of aliphatic aldehydes and alkanones. ln(820.5 - Tb) = 6.38330- 1.37357 × 10-1 Nc + 5.39350ΔEPI + 8.02603 × 10-2N Where the Nc is the effective length of carbon chain of alkyl group in the aliphatic aldehydes and alkanones. The ΔPEI is the polarizability effect index difference between the corresponding branched and normal alkyl isomer containing the same carbon atom number, which expressed the effcet of carbonyl group on the boiling point of aliphatic aldehydes and alkanones. N is the carbon numbers of aliphatic aldehydes and alkanones.

  10. Ferroelectric ultrathin perovskite films

    Science.gov (United States)

    Rappe, Andrew M; Kolpak, Alexie Michelle

    2013-12-10

    Disclosed herein are perovskite ferroelectric thin-film. Also disclosed are methods of controlling the properties of ferroelectric thin films. These films can be used in a variety materials and devices, such as catalysts and storage media, respectively.

  11. Theoretical structural study on the adsorption properties of aliphatic aldehydes on ZnO nanoclusters and graphene-like nanosheets systems

    Science.gov (United States)

    Tayebee, R.; Zamand, N.; Hosseini-nasr, A.; Kargar Razi, M.

    2014-05-01

    The structure optimizations for some aliphatic aldehydes adsorbed on ZnO nanoclusters, and graphene-like nanosheets were carried out using the B3LYP/LanL2DZ calculations and the adsorption energies were calculated. It was considered that adsorption of the examined aldehydes on the ZnO nanoclusters and graphene-like nanosheets occurred through carbonyl oxygens of aldehyde molecules with the surface Zn2+ ions of the central ring. Aldehydes with the general formula of R-COH (R denotes a branched or linear aliphatic chain with maximum of three carbon atoms) were considered. Also, Effects of chain length were investigated on the orientation of the aldehyde molecules with respect to the nanosheet and nanocluster surfaces. Findings revealed that the adsorption energy was decreased with enhancing chain length. However, the most negative adsorption energy was obtained for iso-butyraldehyde, as a branched aldehyde. Interaction of the aldehyde molecules with the surfaces of nanosheets were analyzed by means of DOS analysis and Bader's method. We hope the obtained results be helpful in identifying the mechanism of cyclotrimerization of aliphatic aldehydes on the surface of zinc oxide nanoparticles.

  12. Design, Synthesis, EPR-Studies and Conformational Bias of Novel Spin-Labeled DCC-Analogues for the Highly Regioselective Labeling of Aliphatic and Aromatic Carboxylic Acids.

    Science.gov (United States)

    Gölz, Jan Philipp; NejatyJahromy, Yaser; Bauer, Mirko; Muhammad, Ashraf; Schnakenburg, Gregor; Grimme, Stefan; Schiemann, Olav; Menche, Dirk

    2016-07-01

    Novel types of spin-labeled N,N'-dicyclohexylcarbodiimides (DCC) are reported that bear a 2,2,6,6-tetramethylpiperidinyloxyl (TEMPO) residue on one side and different aromatic and aliphatic cyclohexyl analogues on the other side of the diimide core. These readily available novel reagents add efficiently to aliphatic and aromatic carboxylic acids, forming two possible spin-labeled amide derivatives with different radical distances of the resulting amide. The addition of aromatic DCC analogues proceeds with excellent selectivity, giving amides where the carboxylic acid is exclusively connected to the aromatic residue, while little or no selectivity was observed for the aliphatic congeners. The usefulness of these adducts in structural studies was demonstrated by EPR (electron paramagnetic resonance) measurements of biradical adducts of biphenyl-4,4'-dicarboxylic acids. These analyses also reveal high degrees of conformational bias for aromatic DCC derivatives, which further underlines the powerfulness of these novel reagents. This observation was further corroborated by quantum chemical calculations, giving a detailed understanding of the structural dynamics, while detailed information on the solid state structure of all novel reagents was obtained by X-ray structure analyses. PMID:27272435

  13. Effects of halogenated aromatics/aliphatics and nitrogen(N)-heterocyclic aromatics on estimating the persistence of future pharmaceutical compounds using a modified QSAR model.

    Science.gov (United States)

    Lim, Seung Joo; Fox, Peter

    2014-02-01

    The effects of halogenated aromatics/aliphatics and nitrogen(N)-heterocyclic aromatics on estimating the persistence of future pharmaceutical compounds were investigated using a modified half life equation. The potential future pharmaceutical compounds investigated were approximately 2000 pharmaceutical drugs currently undergoing the United States Food and Drug Administration (US FDA) testing. EPI Suite (BIOWIN) model estimates the fates of compounds based on the biodegradability under aerobic conditions. While BIOWIN considered the biodegradability of a compound only, the half life equation used in this study was modified by biodegradability, sorption and cometabolic oxidation. It was possible that the potential future pharmaceutical compounds were more accurately estimated using the modified half life equation. The modified half life equation considered sorption and cometabolic oxidation of halogenated aromatic/aliphatics and nitrogen(N)-heterocyclic aromatics in the sub-surface, while EPI Suite (BIOWIN) did not. Halogenated aliphatics in chemicals were more persistent than halogenated aromatics in the sub-surface. In addition, in the sub-surface environment, the fates of organic chemicals were much more affected by halogenation in chemicals than by nitrogen(N)-heterocyclic aromatics.

  14. Film Noir Style Genealogy

    OpenAIRE

    Dita Rietuma

    2012-01-01

    Annotation for the Doctoral Work Film Noir Style Genealogy (The Genealogy of the Film Noir Style) The doctoral work topic Film Noir Style Genealogy encompasses traditionally approved world film theory views on the concept of film noir and its related cinematographic heritage, and an exploration of its evolution and distinctive style, including – the development of film noir in the USA, Europe, and also in Latvia, within the context of both socio-political progression and the paradigm of m...

  15. Potential Application of a Visible Light-Induced Photocured Hydrogel Film as a Wound Dressing Material

    Directory of Open Access Journals (Sweden)

    Aazadehsadat Hashemi Doulabi

    2015-01-01

    Full Text Available The objective of this work was to prepare hydrogel films, as semi-interpenetrating polymer networks (semi-IPN, based on polyethylene glycol-co-fumarate (PEGF and chitosan (Ch blends. Hydrogel films were prepared by free radical cross-linking of PEGF, an unsaturated aliphatic polyester, in the presence of N-vinyl pyrrolidone (NVP, camphorquinone (CQ, and N,N-dimethyl-p-toluidine (DMPT as a cross-linking, photoinitiating, and accelerating agent, respectively. The effect of NVP concentration on physicochemical and biological properties of semi-IPN film properties was evaluated. The sol fraction, water vapor transmission rate, and swelling degree of the hydrogel films were also investigated. Antibacterial activity against S. aureus was observed for the photocured blend hydrogels of Ch/PEGF with no toxicity to L929 cells according to the cell viability assays. Blend hydrogel films showing 600 ± 88% of equilibrium swelling degree in water and the lowest sol fraction (3.14 ± 1.22% were obtained at 20 wt% of NVP content whilst preserving their own cytocompatibility and antibacterial activity. Therefore, this formulation was considered as an optimal semi-IPN blend hydrogel film composition with potential application for wound dressing.

  16. The influence of soil and landfill leachate microorganisms in the degradation of PVC/PCL films cast from DMF

    Directory of Open Access Journals (Sweden)

    Adriana de Campos

    2012-01-01

    Full Text Available While the use of plastics continues to increase in our daily lives in a growing range products, these materials are very persistent in the environment. The blending of aliphatic polyesters with other thermoplastic polymers is a profitable way of producing materials with changed physical properties and biodegradability, which can facilitate microbial adhesion to the polymer matrix and help to reduce (post-consumer degradation time of these materials in landfills. This study was an investigation of the biodegradation of films of blends of poly(vinyl chloride (PVC and poly(ε-caprolactone (PCL by soil microorganisms and leachate, by means of respirometry, infrared absorption spectroscopy (FTIR, differential calorimetry scanning (DSC, scanning electron microscopy (SEM, contact angle and weight loss. The results showed that in the soil, the films suffered oxidative biodegradation. The PCL promoted degradation of the PVC in the film of PVC/PCL and the PVC inhibited the rapid degradation of the PCL.

  17. VC复合脂肪酸酯的合成及抗氧化性能%SYNTHESIS AND ANTIOXIDANT EFFECTS OF ASCORBYL COMPOSITE ALIPHATIC ESTER

    Institute of Scientific and Technical Information of China (English)

    冯光炷; 谢文磊

    2001-01-01

    猪油与甲醇进行酯交换制备复合脂肪酸甲酯,得率97.2%.再以浓硫酸为溶剂和催化剂,VC和复合脂肪酸甲酯进行酯交换合成VC复合脂肪酸酯.考察了反应时间、反应物配比及浓硫酸用量对酯交换反应的影响,结果表明,最适宜的反应条件为:n(VC)∶n(复合脂肪酸酯)为1∶1.2,反应时间为26h,n(浓H2SO4)∶n(VC+复合脂肪酸酯)为1∶0.15,反应温度为25℃,产率达76%.产品的抗氧化性能测试表明VC复合脂肪酸酯是一种优良的无毒抗氧化剂.%Ascorbyl composite aliphatic ester was synyhesized by transesterificantion of L-ascorbic acid with methyl composite aliphatic ester which is synthesized from lard and methyl alcohol using concentrated sulfuric acid as sol ve nt and catalyst. The yield was up to 76%. The effects of reaction temperature, r atio of reactant, amount of concentrated sulfuric acid on transesterification ha ve been investigated. The optimum synthetic conditions are that the ratio of Vc to composite aliphatic ester is 1∶1.2,reaction time is 26 h, the ratio of conce ntrated H2SO4 to composite aliphatic ester is 1∶0.15,reaction temperatur e is 25 ℃ .The test of antioxidant shows that Ascorbyl composite aliphatic ester is a good oxidant without poison.

  18. The Evolution of Film: Rethinking Film Studies

    OpenAIRE

    Harbord, Janet P.

    2007-01-01

    How is film changing? What does it do, and what do we do with it? This book examines the reasons why we should be studying film in the twenty-first century, connecting debates from philosophy, anthropology and new media with historical concerns of film studies.

  19. X-ray reflectivity investigation of the foam bilayer film formed by hexaethylene glycol dodecyl ether

    Institute of Scientific and Technical Information of China (English)

    SHEN Qiang; J. J. Benattar; LI Xin; LIU Shaojie

    2003-01-01

    Structural parameters for the free-standing foam film of hexaethylene glycol monododecyl ether (C12E6) have been measured by using X-ray reflectometry. The results indicate that a "five-laminae" model corresponds to this inverted bilayer and divides it into five regions. The thicknesses of the aliphatic chainregions, the polar head-group regions, and the central aqueous core are 0.90, 1.35 and 1.31 nm, respectively; and their corresponding electron densities are 2.4 ( 10?3, 2.6 ( 10?3 and 2.3(10?3 electron/nm3, respectively; the interfacial roughness between adjacent regions is 0.34 nm. The central core of this foam film does not contain free water, its thickness decreased 0.40 nm under the irradiation of infrared rays due to the loss of structural water.

  20. High Ordered Structure of Polyurea Thin Films Prepared by Vapor Deposition Polymerization

    Science.gov (United States)

    Kumagai, Taisuke; Suga, Takahiro; Kubono, Atushi

    Vapor deposition polymerization(VDP) have been utilized for producing polymeric thin films, such as polyimides, polyamides, and polyureas by co-evaporation of two types of bifunctional monomers onto the substrate surface. Through the use of poling treatment, polyureas acquire pyroelectric and piezoelectric activities comparable to those of PVDF. In this study, polyurea thin films were prepared by vapor deposition polymerization. The ordered structures and physical properties were investigated by means of infrared spectroscopy. The infrared spectra indicate that the dipoles of urea groups in the polymer were oriented normal to the surface of substrate. This results that strong interaction between the substrate interface and the urea groups results in the orientation of the urea dipoles during annealing. Moreover, the introduction of aliphatic moieties into the polymer main chain gives rise to easy thermal reorientation of the dipoles in comparison with aromatic moieties. In comparison with aromatic moieties which have rigid frame structure need poling treatment to dipoles reorientation.

  1. Visual Recognition of Aliphatic and Aromatic Amines Using a Fluorescent Gel: Application of a Sonication-Triggered Organogel.

    Science.gov (United States)

    Pang, Xuelei; Yu, Xudong; Lan, Haichuang; Ge, Xiaoting; Li, Yajuan; Zhen, Xiaoli; Yi, Tao

    2015-06-24

    A naphthalimide-based fluorescent gelator (N1) containing an alkenyl group has been designed and characterized. This material is able to gelate alcohols via a precipitate-to-gel transformation when triggered with ultrasound for less than 2 min (S-gel). The gelation process in n-propanol was studied by means of absorption, fluorescence, and IR spectra, scanning electron microscopy (SEM) images, and X-ray diffraction patterns. The fluorescence intensity of N1 decreased during the gelation process in a linear relationship with the sonication time. The S-gel of N1 could be used to sense aliphatic and aromatic amines by measuring the change in the signal output. For example, the addition of propylamine to the S-gel of N1 resulted in a dramatic enhancement of the fluorescence intensity, accompanied by a gel-to-sol transition. On the contrary, when the S-gel of N1 was treated with aromatic amines such as aniline, fluorescence was quenched and there was no gel collapse. The sensing mechanisms were studied by (1)H NMR, small-angle X-ray scattering, SEM and spectroscopic experiments. It is proposed that isomerization of the alkenyl group of N1 from the trans to cis form occurs when the S-gel is treated with propylamine, resulting in a gel-sol transition. However, the aromatic aniline molecules prefer to insert into the gel networks of N1 via hydrogen-bonding and charge-transfer interactions, maintaining the gel state. As potential applications, testing strips of N1 were prepared to detect aniline. PMID:26040296

  2. Aliphatic amine cured PDMS–epoxy interpenetrating network system for high performance engineering applications—Development and characterization

    Indian Academy of Sciences (India)

    T V Thanikai Velan; I Mohammed Bilal

    2000-10-01

    A siliconized epoxy interpenetrating network (IPN) was synthesized from commercially available DGEBA epoxy resin GY250 (Ciba-Geigy, epoxy equivalent = 182–192, viscosity = 9000–12000 cP) and hydroxyl terminated polydimethylsiloxane (PDMS). PDMS and GY250 were thoroughly mixed at 30°C to get the prepolymer. Stoichiometric amounts of PDMS–epoxy prepolymer, -aminopropyltriethoxysilane, aliphatic amine curing agent (HY951), and dibutyltindilaurate catalyst, were thoroughly mixed and cast in a mould after evacuating the entrapped air. The cured material was then taken out and post cured at 70°C for 10 h. IPN was characterized by FTIR spectroscopy, SEM, DSC, TGA and viscosity measurements. Incorporation of PDMS in the epoxy matrix increased the viscosity and lowered the exotherm and pot-life. PDMS in IPN increased , heat-distortion temperature and reduced the percentage weight loss with increase in temperature. Incorporation of PDMS drastically reduced the tensile and flexural strengths and hardness. By reducing the tensile and flexural modulus, the siloxane moiety effectively reduced the internal stress of IPN thereby improving its impact strength and percentage elongation. PDMS increased the electric potential gradient of IPN to withstand without breakdown. An increase in the tracking index and arc resistance of IPN were observed, because of the presence of Si–O–Si, which minimized the possibility of forming carbonized path. Volume and surface resistivities of IPN also increased with the incorporation of PDMS. The siliconized epoxy IPN, with better impact and thermal resistance, may be used in automobile and aerospace applications to withstand high temperature, and mechanical stress. The PDMS–epoxy IPN may be used for encapsulation, high temperature and high voltage application due to their low shrinkage and lesser internal stress. With the improved electrical characteristics, IPN may be used for high performance electrical insulation, insulator housings

  3. Electrospun Nanoporous Poly(butylenes succinate-co-bytylene terephthalate Nonwoven Mats

    Directory of Open Access Journals (Sweden)

    Liang Wang

    2011-01-01

    Full Text Available A traditional Chinese drug “Yunnan Baiyao” is used as an additive in poly(butylenes succinate-co-bytylene terephthalate (PBST solution, which is a kind of biodegradable aliphatic-aromatic copolyesters, to produce microspheres with nanoporosity by electrospinning; the tunable size of nanoporosity can be controlled by changing the voltage applied in the electrospinning process.

  4. The Film Spectator

    NARCIS (Netherlands)

    Buckland, Warren

    1995-01-01

    This is the first collection of essays in English to give prominence to the work of European film scholars whose aim is 'to understand how film is understood'. The Film Spectator raises fundamental issues that have confronted film theory for the past thirty years, but which have never been adequatel

  5. SYNTHESIS AND CRYTALLIZATION PROPERTIES OF CATIONIC DYEABLE POLY ( TRIMETHYLENE TEREPHTHALATE) COPOLYESTERS%阳离子染料可染聚对苯二甲酸丙二酯共聚酯的合成及结晶性能的研究

    Institute of Scientific and Technical Information of China (English)

    姚玉元; 江长明; 吕汪洋; 刘恒山; 王秀华; 陈文兴

    2011-01-01

    通过直接酯化-缩聚工艺,在聚对苯二甲酸丙二酯(PTT)聚合的酯化过程中加入第三组分间苯二甲酸丙二酯-5-磺酸钠(SIPP),在缩聚过程中加入第四组分聚1,6-己二酸-1,4-丁二醇酯(PBA)或聚乙二醇(PEG)合成了一系列不同的阳离子染料可染PTT,采用氢核磁共振波谱(1H-NMR)、差示扫描量热仪(DSC)和热重分析(TG)表征了产物的结构和性能.与常规PTT相比,经SIPP、PBA或PEG改性后的阳离子染料可染PTT热降解性能影响不大.利用差示扫描量热仪(DSC)进一步研究了PTT及改性后阳离子染料可染PTT的非等温结晶性能,结果表明PTT的Avrami指数n在4.24~4.50之间,表明PTT的非等温结晶成核受均相成核和异相成核的双重影响,结晶比较复杂;PTT经SIPP、PBA和PEG改性后的Avrami指数n在1.72~2.64之间,推测它的成核机理主要是异相成核,并且结晶活化能高于常规PTT,说明阳离子染料可染PTT的结晶对温度比较敏感,因此在纺丝过程中控制温度至关重要.%The third component of 5-sulfoisophthalic acid dihydroxy propyl ester sodium salt (SIPP) and the fourth component of poly( butylene adipate) (PBA) or polyethylene glycol (PEG) were added respectively in the process of esterification and polycondensation for the polymerization of 1,3-propanediol ( or trimethylene glycol) and terephthalic acid. Three kinds of cationic dyeable poly (trimethylene terephtalate) copolyesters (PTTs) were synthesized by direct esterification-polycondensation process, and were characterized by differential scanning calorimetry ( DSC ),1 H-nuclear magnetic resonance ( 1 H-NMR ) and thermogravimetric analysis (TGA), respectively. Compared to PTT, the thermal degrodation properties for PTTs modified by SIPP, PBA and PEG almost kept invariant. DSC was used to further investigate the nonisothermal crystallization properties of PTT and the cationic dyeable PTTs, and the experimental results indicated that the Avrami

  6. The Cer-cqu gene cluster determines three key players in a β-diketone synthase polyketide pathway synthesizing aliphatics in epicuticular waxes

    Science.gov (United States)

    Schneider, Lizette M; Adamski, Nikolai M; Christensen, Caspar Elo; Stuart, David B; Vautrin, Sonia; Hansson, Mats; Uauy, Cristobal; von Wettstein-Knowles, Penny

    2016-01-01

    Aliphatic compounds on plant surfaces, called epicuticular waxes, are the first line of defense against pathogens and pests, contribute to reducing water loss and determine other important phenotypes. Aliphatics can form crystals affecting light refraction, resulting in a color change and allowing identification of mutants in their synthesis or transport. The present study discloses three such Eceriferum (cer) genes in barley – Cer-c, Cer-q and Cer-u – known to be tightly linked and functioning in a biochemical pathway forming dominating amounts of β-diketone and hydroxy-β-diketones plus some esterified alkan-2-ols. These aliphatics are present in many Triticeae as well as dicotyledons such as Eucalyptus and Dianthus. Recently developed genomic resources and mapping populations in barley defined these genes to a small region on chromosome arm 2HS. Exploiting Cer-c and -u potential functions pinpointed five candidates, of which three were missing in apparent cer-cqu triple mutants. Sequencing more than 50 independent mutants for each gene confirmed their identification. Cer-c is a chalcone synthase-like polyketide synthase, designated diketone synthase (DKS), Cer-q is a lipase/carboxyl transferase and Cer-u is a P450 enzyme. All were highly expressed in pertinent leaf sheath tissue of wild type. A physical map revealed the order Cer-c, Cer-u, Cer-q with the flanking genes 101kb apart, confirming they are a gene cluster, Cer-cqu. Homology-based modeling suggests that many of the mutant alleles affect overall protein structure or specific active site residues. The rich diversity of identified mutations will facilitate future studies of three key enzymes involved in synthesis of plant apoplast waxes. PMID:26962211

  7. THE EFFECT OF SULPHURIC ACID CONCENTRATION ON SOLVENT EXTRACTION OF ReO4 - BY THE LONG-CHAIN ALIPHATIC TERTIARY AMINES AND ALCOHOLS

    Directory of Open Access Journals (Sweden)

    Aleksander G. Kasikov

    2010-06-01

    Full Text Available The effect of sulphuric acid concentration on solvent extraction of ReO4- by the long-chain aliphatic tertiary amines and alcohols in a wide range of H2SO4 concentrations in initial solutions is discussed. It has been established that the influence of the sulphuric acid concentration on rhenium solvent extraction is largely due to the extraction process mechanism. In the case of the anion-exchange mechanism, ReO4- is best extracted from weakly acidic solutions, whereas when the hydrate-solvate mechanism takes place – from solutions containing 4-7 mole/l H2SO4.

  8. Directing Group in Decarboxylative Cross-Coupling: Copper-Catalyzed Site-Selective C-N Bond Formation from Nonactivated Aliphatic Carboxylic Acids.

    Science.gov (United States)

    Liu, Zhao-Jing; Lu, Xi; Wang, Guan; Li, Lei; Jiang, Wei-Tao; Wang, Yu-Dong; Xiao, Bin; Fu, Yao

    2016-08-01

    Copper-catalyzed directed decarboxylative amination of nonactivated aliphatic carboxylic acids is described. This intramolecular C-N bond formation reaction provides efficient access to the synthesis of pyrrolidine and piperidine derivatives as well as the modification of complex natural products. Moreover, this reaction presents excellent site-selectivity in the C-N bond formation step through the use of directing group. Our work can be considered as a big step toward controllable radical decarboxylative carbon-heteroatom cross-coupling. PMID:27439145

  9. Ionic liquid-H2O Resulting in a Highly Chemoselective Oxidation of Benzylic Alcohols in the Presence of Aliphatic Analogues Catalyzed by Immobilized TEMPO

    Institute of Scientific and Technical Information of China (English)

    HU,Ruijun; LEI,Ming; WEI,Hegeng; WANG,Yanguang

    2009-01-01

    In ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6])-H2O,a highly chemoselective oxidation of benzylic alcohols in the presence of aliphatic ones to the corresponding hydroxyl benzyl aldehydes and ketones was allowed in high yields using N-chlorosuccinimide(NCS)/NaBr/IL-TEMPO(ionic liquid immobilized 2,2,6,6-tetramethylpiperidine-1-oxyl)as a facile and effective catalytic oxidation system.The medium,[bmiml[PF6],together with the catalyst IL-TEMPO could be easily recycled for ten runs without any influence on the efficacy of the reaction in terms of yield and selectivity of the product.

  10. One-step preparation and pH-tunable self-aggregation of amphoteric aliphatic polycarbonates bearing plenty of amine and carboxyl groups.

    Science.gov (United States)

    Wang, Hua-Fen; Jia, Hui-Zhen; Zhu, Jing-Yi; Chu, Yan-Feng; Feng, Jun; Zhang, Xian-Zheng; Zhuo, Ren-Xi

    2012-12-01

    This paper reports a novel amphoteric aliphatic polycarbonate bearing both amine and carboxyl groups. In the absence of protection-deprotection chemistry, the multi-functionalized copolymer is synthesized by one-step enzymatic copolymerization. The influences of the reaction conditions including monomer feed ratio and polymerization time are explored. The simultaneous incorporation of amine and carboxyl functionalities provides the copolymer with a pH-tunable self-aggregation feature, leading to various aggregation states including precipitated agglomerate, well-dispersed positively or negatively charged nanoparticles in a controlled manner. The copolymer displays minimal cytotoxicity to 293T and HeLa cells.

  11. Film Name Translation

    Institute of Scientific and Technical Information of China (English)

    师晓晓

    2014-01-01

    <正>1.Introduction A good translation of the name should convey the information of the film and attract the audience’s desire for going to the cinema.Translation of film names should have business,information,culture,aesthetic features,while a short eye-catching name aims to leave the audience an unforgettable impression.This thesis discusses the translation of English film names from the aspects of the importance of English film name translation,principles for translating English film names and methods of English film name translation.

  12. Large-scale fabrication of linear low density polyethylene/layered double hydroxides composite films with enhanced heat retention, thermal, mechanical, optical and water vapor barrier properties

    Science.gov (United States)

    Xie, Jiazhuo; Zhang, Kun; Zhao, Qinghua; Wang, Qingguo; Xu, Jing

    2016-11-01

    Novel LDH intercalated with organic aliphatic long-chain anion was large-scale synthesized innovatively by high-energy ball milling in one pot. The linear low density polyethylene (LLDPE)/layered double hydroxides (LDH) composite films with enhanced heat retention, thermal, mechanical, optical and water vapor barrier properties were fabricated by melt blending and blowing process. FT IR, XRD, SEM results show that LDH particles were dispersed uniformly in the LLDPE composite films. Particularly, LLDPE composite film with 1% LDH exhibited the optimal performance among all the composite films with a 60.36% enhancement in the water vapor barrier property and a 45.73 °C increase in the temperature of maximum mass loss rate compared with pure LLDPE film. Furthermore, the improved infrared absorbance (1180-914 cm-1) of LLDPE/LDH films revealed the significant enhancement of heat retention. Therefore, this study prompts the application of LLDPE/LDH films as agricultural films with superior heat retention.

  13. Progress of Aliphatic Polyester Grafted Polysaccharides in Biomimetic Materials%脂肪族聚酯接枝聚多糖仿生材料研究进展!

    Institute of Scientific and Technical Information of China (English)

    周开文; 宋继胜

    2012-01-01

    The tendency of biomedical materials is to design the novel biomaterials by biomimetic or bioinspired methods.Both aliphatic polyester and polysaccharides are biodegradable and biocompatible,and they extensively applied in engineering,gene delivery and drug delivery system.The paper reviewed the new research in aliphatic grafted polysaccharides and commented on the questions and the prospect of the biomimetic materials.%该文针对脂肪族聚酯与多糖都具有可生物降解、生物相容性等优点,以脂肪族聚酯接枝改性聚多糖并成为材料研究的热点,制备完全可生物降解的生物仿生材料,在药物控制释放、组织工程支架材料、基因转染载体材料等方面具有广泛应用。该文综述了脂肪族聚酯与多糖接枝改性的研究进展,同时讨论了各种接枝改性方法的特点并对于这类生物仿生材料目前存在的问题以及前景进行了展望。

  14. Identification and biotransformation of aliphatic hydrocarbons during co-composting of sewage sludge-Date Palm waste using Pyrolysis-GC/MS technique.

    Science.gov (United States)

    El Fels, Loubna; Lemee, Laurent; Ambles, André; Hafidi, Mohamed

    2016-08-01

    The behavior of aliphatic hydrocarbons during co-composting of sewage sludge activated with palm tree waste was studied for 6 months using Py-GC/MS. The main aliphatic compounds represented as doublet alkenes/alkanes can be classified into three groups. The first group consists of 11 alkenes (undecene, tridecene, pentadecene, hexadecene, heptadecene, octadecene, nonadecene, eicosene, uncosene, docosene, tricosene) and 15 alkanes (heptane, octane, nonane, decane, undecane, dodecane, tetradecane, pentadecane, heptadecane, octadecane, nonadecane, eicosane, uncosane, docosane, and tricosane), which remain stable during the co-composting process. The stability of these compounds is related to their recalcitrance behavior. The second group consists of five alkenes (heptene, octene, nonene, decene, dodecene) and tridecane as a single alkane that decreases during co-composting. The decrease in these compounds is the combined result of their metabolism and their conversion into other compounds. The third group is constituted with tetradecene and hexadecane that increase during composting, which could be explained by accumulation of these compounds, which are released by the partial breakdown of the substrate. As a result, these molecules are incorporated or adsorbed in the structure of humic substances. PMID:27197656

  15. Study on New Extraction Technique of Higher Aliphatic Alkanols from Beeswax%蜂蜡中提取高级脂肪醇的新工艺研究

    Institute of Scientific and Technical Information of China (English)

    蔡力创; 罗晓燕; 欧阳克氙; 肖正强; 刘建平

    2011-01-01

    The extraction conditions of higher aliphatie alkanols from beeswax by improved saponification hydrolysis were studied and discussed in this paper. By screening materials and opimizing the influencing factor of saponification hydrolysis, the optimal extraction conditions were researched and obtained. Chinese beeswax from Ganzhou was used as material, aviation kerosene was used as solvent and reaction time was 4.5 hour. As a result, the yield rate of higher aliphatic alkanols could be reached up from 33% to 35%. From the analytic identification and quantification of the higher aliphatic alkanols by C,C,the content of octacosanol and triacontanol was found to be up to 12% and 70% respectively.%研究探讨皂化水解法从蜂蜡中提取高级脂肪醇的工艺条件,通过筛选原料和优化皂化水解反应的影响因素,得出最佳工艺条件:选择赣州的中蜂蜡为原料,航空煤油为溶剂,反应时间为4.5 h,此时的高级脂肪醇的得率为33%~35%。通过GC对高级脂肪醇分析,二十八烷醇的含量达到12%,且三十烷醇含量达到70%。

  16. The mixed aliphatic/aromatic composition of evaporating very small grains in NGC 7023 viewed by the 3.4/3.3 $\\mu$m ratio

    CERN Document Server

    Pilleri, P; Boulanger, F; Onaka, T

    2015-01-01

    In photon-dominated regions (PDRs), UV photons from nearby stars lead to the evaporation of very small grains (VSGs) and the production of gas-phase polycyclic aromatic hydrocarbons (PAHs). Our goal is to get further insights into the composition and evolution of evaporating very small grains (eVSGs) and PAHs through the analysis of the infrared (IR) aliphatic and aromatic emission bands. We combine spectro-imagery in the near- and mid-IR to study the spatial evolution of the emission bands in the prototypical PDR NGC 7023. We use near-IR spectra obtained with AKARI to trace the evolution of the 3.3$\\mu$m and 3.4$\\mu$m bands that are associated with aromatic and aliphatic C-H bonds on PAHs, respectively. The spectral fitting involves an additional broad feature centred at 3.45$\\mu$m. Mid-IR observations obtained with Spitzer are used to discriminate the signatures of eVSGs, neutral and cationic PAHs. We correlate the spatial evolution of all these bands with the intensity of the UV field to explore the proces...

  17. Potentiometric studies on ternary complexes involving some divalent transition metal ions, gallic acid and biologically abundant aliphatic dicarboxylic acids in aqueous solutions

    Directory of Open Access Journals (Sweden)

    Abdelatty Mohamed Radalla

    2015-06-01

    Full Text Available Formation of binary and ternary complexes of the divalent transition metal ions, Cu2+, Ni2+, Co2+ and Zn2+ with gallic acid and the biologically important aliphatic dicarboxylic acids (adipic, succinic, malic, malonic, maleic, tartaric and oxalic acids were investigated by means of the potentiometric technique at 25 °C and I = 0.10 mol dm−3 NaNO3. The acid-base properties of the ligands were investigated and discussed. The acidity constants of gallic acid and aliphatic dicarboxylic acids were determined and used for determining the stability constants of the binary and ternary complexes formed in the aqueous medium under the above experimental conditions. The formation of the different 1:1 and 1:2 binary complexes and 1:1:1 ternary complexes are inferred from the corresponding potentiometric pH-metric titration curves. The ternary complex formation was found to occur in a stepwise manner. The stability constants of these binary and ternary systems were calculated. The values of Δ log K, percentage of relative stabilization (%R.S. and log X were evaluated and discussed. The concentration distribution of the various complex species formed in solution was evaluated and discussed. The mode of chelation of ternary complexes formed was ascertained by conductivity measurements.

  18. Click synthesis of neutral, cationic, and zwitterionic poly(propargyl glycolide)-co-poly(ɛ-caprolactone)-based aliphatic polyesters as antifouling biomaterials.

    Science.gov (United States)

    Tu, Qin; Wang, Jian-Chun; Liu, Rui; Chen, Yun; Zhang, Yanrong; Wang, Dong-En; Yuan, Mao-Sen; Xu, Juan; Wang, Jinyi

    2013-08-01

    With the development of polymer-based biomaterials, aliphatic polyesters have attracted considerable interest because of their non-toxicity, non-allergenic property, and good biocompatibility. However, the hydrophobic nature and the lack of side chain functionalities of aliphatic polyesters limit their biomedical applications. In this study, we prepared four new polyesters: poly(sulfobetaine methacrylate)-, poly(2-methacryloyloxyethyl phosphotidylcholine)-, poly(ethylene glycol)-, and quaternized poly[(2-dimethylamino)ethyl methacrylate]-grafted poly(propargyl glycolide)-co-poly(ɛ-caprolactone). Their synthesis was conducted through ring-opening polymerization of acetylene-functionalized lactones and subsequent graft of bioactive units using click chemistry. The chemical structures of the polyesters were characterized through nuclear magnetic resonance and Fourier-transform infrared spectroscopy, and their physical properties (including molecular weight, glass transition temperature, and melting point) were determined using gel permeation chromatography and differential scanning calorimetry. For studies on their hydrophilicity, stability, and anti-bioadhesive property, a series of polymeric surfaces of these polyesters was prepared by coating them onto glass substrates. The hydrophilicity and stability of these polyester surfaces were examined by contact angle measurements and attenuated total reflection Fourier-transform infrared spectroscopy. Their anti-bioadhesive property was investigated through protein adsorption, as well as cellular and bacterial adhesion assays. The prepared polyesters showed good hydrophilicity and long-lasting stability, as well as significant anti-fouling property. The newly prepared polyesters could be developed as promising anti-fouling materials with extensive biomedical applications. PMID:23511626

  19. The Educational Film Industry

    Science.gov (United States)

    Tortora, Vincent R.; Schillaci, Peter

    1975-01-01

    Increased dialog is needed among educational film producers, distributors, and consumers in order to be sure that what is being produced meets educators' needs and also to help solve the financial problems of the film industry. (LS)

  20. Film som kunst

    DEFF Research Database (Denmark)

    Petersen, Anne Ring

    2013-01-01

    Films by artists induce scholars to work across art, film and cultural history. Accordingly, this article adopts an interdisciplinary approach to the British-Nigerian artist Yinka Shonibare’s film Un Ballo in Maschera (2004). The film is grounded in Shonibare’s unique use of African-print fabric...... connotations of the African-print fabric, which are also central to the critique of power in Un Ballo in Maschera. Its critical agenda is then analysed and put into historical perspective by relating the film to Black British film. A comparison with the Black Audio Film Collective’s key work Handsworth Songs...... in conjunction with references to European cultural and political history, but the film is also – it is alleged – rooted in Black British cinema and the transnational postcolonialism which emerged in the UK of the 1980s. The article starts with a general introduction to Shonibare’s art and the colonial...

  1. Defining Documentary Film

    DEFF Research Database (Denmark)

    Juel, Henrik

    2006-01-01

    A discussion of various attemts at defining documentary film regarding form, content, truth, stile, genre or reception - and a propoposal of a positive list of essential, but non-exclusive characteristica of documentary film......A discussion of various attemts at defining documentary film regarding form, content, truth, stile, genre or reception - and a propoposal of a positive list of essential, but non-exclusive characteristica of documentary film...

  2. Lars von Triers film

    DEFF Research Database (Denmark)

    Nielsen, Lisbeth Overgaard

    2007-01-01

    Afhandlingen undersøger Lars von Triers filmæstetik, som den kommer til udtryk i spillefilmene fra perioden 1984-2007. Afhandlingen analyserer de enkelte films stil, virkningsstrategi og betydningsdannelse.......Afhandlingen undersøger Lars von Triers filmæstetik, som den kommer til udtryk i spillefilmene fra perioden 1984-2007. Afhandlingen analyserer de enkelte films stil, virkningsstrategi og betydningsdannelse....

  3. Literature and Film.

    Science.gov (United States)

    Richardson, Robert

    The differences, similarities, and common goals of film and literature, as well as the ways in which each form and its associated criticism is able to illuminate the other, are discussed in this book. Individual chapters are "Literature and Film,""Literary Origins and Backgrounds of the Film,""Griffith and Eisenstein: The Uses of Literature in…

  4. Teaching Culture Through Films

    Institute of Scientific and Technical Information of China (English)

    徐婷

    2016-01-01

    Cultural teaching is an issue which is associated with complexity and paradox and also it is a big challenge for faculty. Teaching culture through films has become an important way of cross-cultural teaching This paper focuses on the reasons for teaching culture through films, the value and how it works. And finally it leads out the prospects of cultural teaching through films.

  5. Getting into Film.

    Science.gov (United States)

    London, Mel

    This book describes the various aspects of the film industry and the many jobs related to filmmaking, stressing that no "formula" exists for finding a successful career in the film industry. Chapters provide information on production, writing for film, cinematography, editing, music, sound, animation and graphics, acting and modeling, the "unsung…

  6. Thin film processes II

    CERN Document Server

    Kern, Werner

    1991-01-01

    This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques.Key Features* Provides an all-new sequel to the 1978 classic, Thin Film Processes* Introduces new topics, and sever

  7. Pyrolyzed thin film carbon

    Science.gov (United States)

    Tai, Yu-Chong (Inventor); Liger, Matthieu (Inventor); Harder, Theodore (Inventor); Konishi, Satoshi (Inventor); Miserendino, Scott (Inventor)

    2010-01-01

    A method of making carbon thin films comprises depositing a catalyst on a substrate, depositing a hydrocarbon in contact with the catalyst and pyrolyzing the hydrocarbon. A method of controlling a carbon thin film density comprises etching a cavity into a substrate, depositing a hydrocarbon into the cavity, and pyrolyzing the hydrocarbon while in the cavity to form a carbon thin film. Controlling a carbon thin film density is achieved by changing the volume of the cavity. Methods of making carbon containing patterned structures are also provided. Carbon thin films and carbon containing patterned structures can be used in NEMS, MEMS, liquid chromatography, and sensor devices.

  8. Chronicles of foam films.

    Science.gov (United States)

    Gochev, G; Platikanov, D; Miller, R

    2016-07-01

    The history of the scientific research on foam films, traditionally known as soap films, dates back to as early as the late 17th century when Boyle and Hooke paid special attention to the colours of soap bubbles. Their inspiration was transferred to Newton, who began systematic study of the science of foam films. Over the next centuries, a number of scientists dealt with the open questions of the drainage, stability and thickness of foam films. The significant contributions of Plateau and Gibbs in the middle/late 19th century are particularly recognized. After the "colours" method of Newton, Reinold and Rücker as well as Johhonnot developed optical methods for measuring the thickness of the thinner "non-colour" films (first order black) that are still in use today. At the beginning of the 20th century, various aspects of the foam film science were elucidated by the works of Dewar and Perrin and later by Mysels. Undoubtedly, the introduction of the disjoining pressure by Derjaguin and the manifestation of the DLVO theory in describing the film stability are considered as milestones in the theoretical development of foam films. The study of foam films gained momentum with the introduction of the microscopic foam film methodology by Scheludko and Exerowa, which is widely used today. This historical perspective serves as a guide through the chronological development of knowledge on foam films achieved over several centuries. PMID:26361708

  9. Ceramic Composite Thin Films

    Science.gov (United States)

    Ruoff, Rodney S. (Inventor); Stankovich, Sasha (Inventor); Dikin, Dmitriy A. (Inventor); Nguyen, SonBinh T. (Inventor)

    2013-01-01

    A ceramic composite thin film or layer includes individual graphene oxide and/or electrically conductive graphene sheets dispersed in a ceramic (e.g. silica) matrix. The thin film or layer can be electrically conductive film or layer depending the amount of graphene sheets present. The composite films or layers are transparent, chemically inert and compatible with both glass and hydrophilic SiOx/silicon substrates. The composite film or layer can be produced by making a suspension of graphene oxide sheet fragments, introducing a silica-precursor or silica to the suspension to form a sol, depositing the sol on a substrate as thin film or layer, at least partially reducing the graphene oxide sheets to conductive graphene sheets, and thermally consolidating the thin film or layer to form a silica matrix in which the graphene oxide and/or graphene sheets are dispersed.

  10. 两亲性脂肪族聚氨酯的合成与表征%Svnthesis and Characterization of Amphiphilic Aliphatic Polyurethane

    Institute of Scientific and Technical Information of China (English)

    张立柱; 赵辉鹏; 张高奇; 查刘生

    2011-01-01

    A series of amphiphilic aliphatic polyurethanes with different molecular weights from 10000 to 50000 were synthesized using isophorone diisocyanate as polyisocyanates poly (ethylene glycol) of molecular weight 6000 as polyol, and cetyl alcohol as end capping reagent. Their structure and the rheological property of their aqueous dispersion were characterized by fourier transformation infrared spectroscopy( FT-IR), proton nuclear magnetic resonance(1 H-NMR), gel permeation chromatography-light scattering( GPC-LS), and advanced rotational rheometer.The results showed that the number-averaged molecular weights and end capping ratios of amphiphilic aliphatic polyurethanes could be obtained by the integral area of related 1 H-NMR peaks, and their number-averaged molecular weight were nearly consistent with the results measured by GPC-LS and the theoretical values. At the same concentration, as the hydrophobic block contents of the amphiphilic aliphatic polyurethanes increased, the zero shear viscosity was enhanced and the onset concentration of shear thinning was decreased.%采用异佛尔酮二异氰酸酯和相对分子质量为6000的聚乙二醇为原料、十六醇为封端剂,合成了相对分子质量在10000~50000范围内的一系列两亲性脂肪族聚氨酯.用傅立叶变换红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)、凝胶渗透色谱-光散射联用仪(GPC-LS)、高级旋转流变仪对两亲性聚氨酯的结构及其水分散液的流变性能进行了研究.结果表明,用1H-NMR谱图中相关峰的面积通过计算得到两亲性脂肪族聚氨酯的数均相对分子质量和疏水链段的封端率,数均相对分子质量大小与GPC-LS测得的结果以及理论值基本一致.在相同浓度情况下,随着两亲性聚氨酯分子链中疏水链段含量的增加,其水分散液的零剪切粘度增大,开始出现剪切变稀的剪切速率减小.

  11. Aliphatic side chains of proteins as potential geomarkers of NOM liberated from the melting permafrost and discharged to the Arctic Ocean by the Kolyma River run off

    Science.gov (United States)

    Dubinenkov, I. V.; Perminova, I.; Kononikhin, A.; Nikolaev, E.; Hertkorn, N.; Bulygina, E. B.; Holmes, R. M.

    2011-12-01

    The Arctic ecosystem is highly sensitive to climate change. Global warming might have considerable effects on regional carbon cycling due to permafrost melting. Permafrost in the Arctic region represents an extremely large organic carbon reservoir mostly stored in the permafrost. Mobilization of just a small portion of carbon stored in Arctic soils will have considerable impacts on the flux of organic carbon from land to the Arctic Ocean, which can affect the Arctic environment. The Kolyma River watershed is one of the Arctic Ocean's largest. It is dominated by continuous permafrost which is underlain with rich organic soils susceptible to increased fluvial transport. The goal of the work was to analyze the structure of isolated natural organic matter from different fresh water environments of the Kolyma river basin. NOM was isolated from the Kolyma River main stream, its tributaries, a thermokarst lake, a floodplain stream and the permafrost. Solid phase extraction technique was used with Bond Elute PPL cartridges. Nuclear magnetic resonance spectroscopy (NMR) and Fourier Transform Ion Cyclotron Resonance Mass Spectroscopy (FTICRMS) was used for structural studies because of unsurpassed molecular level structural information provided by these high resolution magnetic resonance techniques. The NOM samples from the Kolyma River showed high contents of non-substituted aliphatic structures with a low content of aromatics and carbohydrates. Aliphatic nature may indicate a microbial source of NOM in the form of degraded terpenoids and hopanols. It was shown that almost all NOM samples from the rivers had similar molecular composition enriched with aliphatic units. The samples from permafrost mud streams were significantly different and contained sharp peptide signatures. In general, permafrost NOM contained much less degraded peptide residuest as compared to riverine samples. Identification of these residues showed the presence of branched amino acids (valine, alanine

  12. Analysis of Western Film' influence on Chinese Film Culture

    Institute of Scientific and Technical Information of China (English)

    罗淞译

    2015-01-01

    Western countries are the place where the international film culture originated. The western film has a far-reaching influence on the development of film and television industry all over the world. As China's film and television industry is in the era of reform, it is an essential part to use the experience in development of western films which can provide Chinese film culture with guidance in various fields. The present thesis firstly gives an analysis into characteristics of the western film culture and summarizes its influences on Chinese film culture, and then provides film art reform with some feasible suggestions.

  13. Novel platinum(II) complexes of long chain aliphatic diamine ligands with oxalato as the leaving group: Comparative cytotoxic activity relative to chloride precursors

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Heveline; Barra, Carolina V.; Rocha, Fillipe V.; Fontes, Ana Paula S. [Universidade Federal de Juiz de Fora (UFJF), MG (Brazil). Dept. de Quimica; Lopes, Miriam T.P. [Universidade Federal deMinas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Farmacologia; Frezard, Frederic, E-mail: frezard@icb.ufmg.b [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Fisiologia e Biofisica

    2010-07-01

    Platinum complexes play an important role in the development of anticancer drugs. Their cytotoxicity can be influenced by the nature of the leaving ligands, due to the hydrolysis reaction that occurs prior to the binding of the platinum complex to DNA. Also, non-leaving groups such as lipophilic diamines may affect cellular uptake. In this work, we describe the synthesis of platinum(II) complexes having oxalato and long chain aliphatic N-alkyl ethylenediamines as ligands. The products were characterized by elemental analyses, infrared spectroscopy and {sup 1}H, {sup 13}C and {sup 195}Pt NMR spectroscopy. Biological activity was assessed against tumor cell lines (A{sub 549}, B16-F1, B16-F10, MDA-MB-231) and non-tumor cell lines (BHK-21 and CHO). The length of the carbon chain affects the cytotoxicity and the oxalato complexes were less cytotoxic than the respective chloride-containing analogues. (author)

  14. In Situ and Laboratory Studies on the Fate of Specific Organic Compounds in an Anerobic Landfill Leachate Plume, 2. Fate of Aromatic and Chlorinated Aliphatic Compounds

    DEFF Research Database (Denmark)

    Nielsen, Per Henning; Bjarnadóttir, Helga; Winter, Pia L.;

    1995-01-01

    and laboratory batch microcosm experiments performed focusing on redox conditions, microbiology and the fate of 7 phenolic compounds. In this paper we present the results on the fate of 8 aromatic compounds and 4 chlorinated aliphatic compounds. Nitrobenzene was transformed at all distances from the landfill......The transformation of specific organic compounds was investigated by in situ and laboratory experiments in an anaerobic landfill leachate pollution plume at four different distances from the landfill. In a previous paper (Part 1, also published in this issue) we described the in situ microcosm...... the landfill. In general, good accordance with respect to compound transformation was observed between in situ and laboratory experiments, but in a few cases more compounds were transformed in in situ experiments than in the corresponding laboratory experiments....

  15. Infrared and ultraviolet-visible spectroscopic studies of plasma polymerized 1, 1, 3, 3 - tetramethoxypropane thin films

    International Nuclear Information System (INIS)

    Plasma polymerized 1, 1, 3, 3-tetramethoxy-propane (PPTMP) thin films of different thicknesses were prepared through glow discharge of 1, 1, 3, 3-tetramethoxypropane using a capacitively coupled reactor. The scanning electron micrographs show that as-deposited PPTMP thin films are smooth, uniform and pinhole free. Infrared spectroscopic investigation indicates the formation of conjugation along with C = O bonds in as deposited PPTMP thin films. Apart from aliphatic conjugation of C = C and C = O bonds there is formation of C-O-C bond owing to rearrangement of oxygen due to heat treatment of PPTMP thin films. A red shift in the maximum absorption wavelength of the ultra violet-visible spectra for all the PPTMP thin films is observed compared to the monomer maximum absorption wavelength. The absorption coefficient, allowed direct transition, Eqd, allowed indirect transition and Eqi, energy gaps were determined. The Eqd and Eqi are found to be about 2.92 to 3.16 eV and 0.80 to 1.53 eV respectively, for as deposited PPTMP samples of different thicknesses. The Eqi of two samples of different thicknesses heat treated at 673 K for 1 hour is 0.55 and 0.65 eV .

  16. High-resolution gas chromatographic analysis of polycyclic aromatic hydrocarbons and aliphatic hydrocarbons; Separacion por cromatografia de gases de alta eficiencia de hidrocarburos aromaticos policiclicos, (PAH) y alifaticos (AH) ambientales, empleado como fases estacionarias OV-1 y SE-54

    Energy Technology Data Exchange (ETDEWEB)

    Perez, M.; Gonzalez, D.

    1988-07-01

    A study of the analysis by gas chromatography of aromatic polycyclic hydrocarbons and aliphatic hydrocarbons is presented. The separation has been carried out by glass and fused silica capillary column in two different polar stationary phases OV-1 and SE-54. The limitation and the advantages of the procedure are discussed in terms of separation, sensitivity and precision. (Author) 20 refs.

  17. EFSA Scientific Opinion on Flavouring Group Evaluation 78, Revision 1 (FGE.78Rev1): Consideration of aliphatic and alicyclic and aromatic hydrocarbons evaluated by JECFA (63rd meeting) structurally related to aliphatic and aromatic hydrocarbons evaluated by EFSA in FGE.25Rev2

    DEFF Research Database (Denmark)

    Larsen, John Christian; Nørby, Karin Kristiane; Beltoft, Vibe Meister;

    evaluation is necessary, as laid down in Commission Regulation (EC) No 1565/2000. The present consideration concerns a group of 24 aliphatic, alicyclic and aromatic hydrocarbons evaluated by the JECFA (65th meeting). In the previous version of FGE.78, the Panel concluded that for 13 substances no applicable...... NOAEL was available for the substance itself or on a structurally related compound and therefore further data were required. Additional data (long term study of toxicity, mutagenicity studies and new tonnage figure) have now become available for beta-myrcene [FL-no: 01.008] and the present revision...

  18. Investigation on modes of toxic action to rats based on aliphatic and aromatic compounds and comparison with fish toxicity based on exposure routes.

    Science.gov (United States)

    He, Jia; Li, Jin J; Wen, Yang; Tai, Hong W; Yu, Yang; Qin, Wei C; Su, Li M; Zhao, Yuan H

    2015-06-01

    The modes of toxic action (MOAs) play an important role in the assessment of the ecotoxicity of organic pollutants. However, few studies have been reported on the MOAs in rat toxicity. In this paper, the toxic contributions of functional groups in 1255 aromatic compounds were calculated from regression and were then compared with the toxic contributions in aliphatic compounds. The results show that some functional groups have same toxic contributions both in aromatic and aliphatic compounds, but some have not. To investigate the MOAs in rat toxicity, the distribution of toxic ratio (TR) was examined for well-known baseline and less inert compounds and thresholds of log TR=0.3 and 0.5 were used to classify baseline, less inert and reactive compounds. The results showed that some compounds identified as baseline compounds in fish toxicity were also classified as baseline compounds in rat toxicity. Except for phenols and anilines which were identified as less inert compounds in fish toxicity, aromatic compounds with functional groups such as ether, nitrile, nitrophenol, isocyanatoe and chloro were identified as less inert chemicals in rat toxicity. Reactive compounds identified in fish toxicity exhibit greater toxicity to rats. These compounds can undergo nucleophilic substitution, acylation and Schiff base formation with biological macromolecules. The critical body residues (CBRs) calculated from absorption and bioconcentration show that log 1/CBRs in rat toxicity are not equal to that in fish for some compounds. It suggests that the exposure route can affect the identification of MOAs between these two species for these compounds.

  19. Polycyclic aromatic and aliphatic hydrocarbons in Chukchi Sea biota and sediments and their toxicological response in the Arctic cod, Boreogadus saida

    Science.gov (United States)

    Harvey, H. Rodger; Taylor, Karen A.; Pie, Hannah V.; Mitchelmore, Carys L.

    2014-04-01

    As part of the Chukchi Sea Offshore Monitoring in Drilling Area-Chemical and Benthos (COMIDA CAB) project, we determined the distribution and concentrations of aliphatic n-alkanes and polycyclic aromatic hydrocarbons (PAHs) in surface sediments (0-1 cm) among 52 sites across the Chukchi Sea and in muscle tissues of the benthic Northern whelk, Neptunea heros, collected opportunistically. In addition, downcore profiles of contaminants were determined at three targeted sites to establish historic patterns. Baseline responses of PAH exposure and its potential toxicological effects were examined in the common Arctic cod, Boreogadus saida, through measures of cytochrome P4501A/ ethoxyresorufin O-deethylase (CYP1A/EROD), glutathione-S-transferase (GST), and Cu/Zn superoxide dismutase (SOD) activity in liver tissue. The total concentration of PAHs in surface sediments throughout the study area, including parent and alkyl-homologs, were very low (<1600 ng g-1 dry wt) except for a single station, where values were 2-20-fold greater than at other baseline sites (2956 ng g-1 dry wt). Alkyl-substituted PAHs were the dominant form in all surface (54-93%) and subsurface sediments (50-81% of the total), with a general decrease in total PAH concentrations observed downcore. In biota, larger Neptunea showed lower total concentrations of PAHs in foot muscles (4.5-10.7 ng g-1 wet wt) compared to smaller animals; yet aliphatic n-alkane (C19-C33) concentrations (0.655-5.20 μg g-1 wet wt) increased in larger organisms with distributions dominated by long-chain (C23-C33) hydrocarbons. In B. saida, CYP1A1, GST, and SOD enzyme levels were comparable to baseline levels previously reported in other pristine systems. Of the three assays, only SOD had a significant correlation between gene expression and enzyme activity.

  20. Ultrathin permalloy films

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In view of the principle of glow-discharge, ultrathin Ni81Fe19(12 nm) films were prepared at an ultrahigh base vacuum. The anisotropic magnetoresistance coefficient (AR/R %) for Ni81Fe19(12 nm) film reaches 1.2%, while the value of its coercivity is 127 A/m (i.e. 1.6Oe). Ultrathin Ni81Fe19(12 nm) films were also prepared at a lower base vacuum. The comparison of the structure for two kinds of films shows that the films prepared at an ultrahigh base vacuum have a smoother surface, a denser structure with a few defects; the films prepared at a lower base vacuum have a rougher surface, a porouser structure with some defects.

  1. Evaporated VOx Thin Films

    Science.gov (United States)

    Stapinski, Tomasz; Leja, E.

    1989-03-01

    VOx thin films on glass were obtained by thermal evaporation of V205, powder. The structural investigations were carried out with the use of X-ray diffractometer. The electrical properties of the film were examined by means of temperature measurements of resistivity for the samples heat-treated in various conditions. Optical transmission and reflection spectra of VOX films of various composition showed the influence of the heat treatment.

  2. Clinical careers film.

    Science.gov (United States)

    2015-09-01

    Those interested in developing clinical academic careers might be interested in a short animated film by Health Education England (HEE) and the National Institute for Health Research. The three-minute film, a frame from which is shown below, describes the sort of opportunities that are on offer to all professionals as part of the HEE's clinical academic careers framework. You can view the film on YouTube at tinyurl.com/pelb95c. PMID:26309005

  3. Navigating stories in films

    OpenAIRE

    Salway, Andrew; Xu, Yan

    2005-01-01

    This report describes the transformation of feature films into hypervideo by representing their story structures using plot unties. Plot units represent cause-effect relationships between characters’ affect states and the events in a story. We use plot units to structure hypervideo links between intervals of video data. We have manually analysed two full-length feature films in terms of plot units. A system was developed to store and edit data about plot units and to navigate films by followi...

  4. Renaissance of the Film.

    Science.gov (United States)

    Bellone, Julius, Ed.

    The post-World War II period was one of the liveliest in the history of the cinema. This is a collection of 33 critical articles on some of the best films of the perd. Most of the essays explicate the themes and symbols of the films. The essays deal with these films: "The Apu Trilogy,""L'Avventura,""Balthazar,""Blow-Up,""Bonnie and Clyde," Citizen…

  5. Religion og film

    DEFF Research Database (Denmark)

    Hvithamar, Annika; Eskjær, Mikkel Fugl

    2007-01-01

    Artiklen søger at stipulere en ramme for analyse af religion og film. Dels ved at række ud over den blotte konstatering af tilstedeværelse af religiøse elementer i film, dels ved at anslå en række temaer, der kan anvendes til analyse af sådanne film (individualisering, (de-)sekularisering, banal...

  6. Den danske independent film

    DEFF Research Database (Denmark)

    Hansen, Kim Toft

    2014-01-01

    at producere film, og derved er filmproduktion potentielt gjort tilgængelig for en større gruppe personer som både afsender og modtager. For det fjerde implicerer diskussionen af de to film også genre- og stilmæssige spørgsmål om dansk filmkultur, fordi indiefilmen både i film og uden for filmene italesætter...

  7. Self Healing Soap Films

    CERN Document Server

    Killian, Taylor; Bryson, Joshua; Truscott, Tadd

    2012-01-01

    In 1904, while experimenting with high-speed photography, Lucien Bull recorded a pellet passing through a soap bubble. We investigate the dynamics that allow for a rigid body to pass through a hemispherical soap film without rupturing it. Spheres were dropped from rest above a hemispherical soap film. At impact, the soap film stretches into a cavity around the sphere. As the sphere continues to descend, the film cavity pinches off and the film returns to its initial hemispherical shape. Upon closer observation of the film-sphere-air interface, the stability of the soap film appears to arise through a balance between the forces of the sphere inertia and the film tension. Therefore the relevant experimental parameter is the Weber number: We=(rho 2ghR)/sigma, where R is the sphere radius and h is the height that the sphere is dropped from. We vary the sphere radius and velocity to provide a range of Weber numbers in order to investigate the dependence of film stability. Three subtly distinct regimes arise across...

  8. Film: Genres and Genre Theory

    DEFF Research Database (Denmark)

    Bondebjerg, Ib

    2015-01-01

    is thus based on a set of conventions that influence both the production of individual works within that genre and audience expectations and experiences. Genres are used by industry in the production and marketing of films, by film analysts and critics in historic analysis of film, and as a framework......Genre is a concept used in film studies and film theory to describe similarities between groups of films based on aesthetic or broader social, institutional, cultural, and psychological aspects. Film genre shares similarities in form and style, theme, and communicative function. A film genre...

  9. Thin film calorimetry of polymer films

    Science.gov (United States)

    Zhang, Wenhua; Rafailovich, Miriam; Sokolov, Jonathan; Salamon, William

    2000-03-01

    Polystryene and polymethylmethacrylate films for thicknesses ranging from 50nm to 500nm using a direct calorimetric technique (Lai et al, App. Phys. Lett. 67, p9(1995)). Samples were deposited on Ni foils(2-2.5um) and placed in a high vacuum oven. Calibrated heat pulses were input to the polymer films by current pulses to the Ni substrate and temperature changes were determined from the change in Ni resistance. Pulses producing temperature jumps of 3-8K were used and signal averaging over pulses reduced noise levels enough to identify glass transitions down to 50nm. Molecular weight dependence of thick films Tg was used as a temperature calibration.

  10. Thin-film forces in pseudoemulsion films

    Energy Technology Data Exchange (ETDEWEB)

    Bergeron, V.; Radke, C.J. [California Univ., Berkeley, CA (United States). Dept. of Chemical Engineering]|[Lawrence Berkeley Lab., CA (United States)

    1991-06-01

    Use of foam for enhanced oil recovery (EOR) has shown recent success in steam-flooding field applications. Foam can also provide an effective barrier against gas coning in thin oil zones. Both of these applications stem from the unique mobility-control properties a stable foam possesses when it exists in porous media. Unfortunately, oil has a major destabilizing effect on foam. Therefore, it is important for EOR applications to understand how oil destroys foam. Studies all indicate that stabilization of the pseudoemulsion film is critical to maintain foam stability in the presence of oil. Hence, to aid in design of surfactant formulations for foam insensitivity to oil the authors pursue direct measurement of the thin-film or disjoining forces that stabilize pseudoemulsion films. Experimental procedures and preliminary results are described.

  11. Protolytic carbon film technology

    Energy Technology Data Exchange (ETDEWEB)

    Renschler, C.L.; White, C.A.

    1996-04-01

    This paper presents a technique for the deposition of polyacrylonitrile (PAN) on virtually any surface allowing carbon film formation with only the caveat that the substrate must withstand carbonization temperatures of at least 600 degrees centigrade. The influence of processing conditions upon the structure and properties of the carbonized film is discussed. Electrical conductivity, microstructure, and morphology control are also described.

  12. Filming for Television.

    Science.gov (United States)

    Englander, A. Arthur; Petzold, Paul

    Film makers, professional or amateur, will find in this volume an extensive discussion of the adaptation of film technique to television work, of the art of the camera operator, and of the productive relationships between people, organization, and hardware. Chapters include "The Beginnings," an overview of the interrelationship between roles in…

  13. Thick film hydrogen sensor

    Science.gov (United States)

    Hoffheins, Barbara S.; Lauf, Robert J.

    1995-01-01

    A thick film hydrogen sensor element includes an essentially inert, electrically-insulating substrate having deposited thereon a thick film metallization forming at least two resistors. The metallization is a sintered composition of Pd and a sinterable binder such as glass frit. An essentially inert, electrically insulating, hydrogen impermeable passivation layer covers at least one of the resistors.

  14. Thin films on cantilevers

    NARCIS (Netherlands)

    Nazeer, Hammad

    2012-01-01

    The main goal of the work compiled in this thesis is to investigate thin films for integration in micro electromechanical systems (MEMS). The miniaturization of MEMS actuators and sensors without compromising their performance requires thin films of different active materials with specific propertie

  15. Film, Neuroaesthetics, and Empathy

    DEFF Research Database (Denmark)

    Grodal, Torben Kragh; Kramer, Mette

    2014-01-01

    The article analyzes the link between film viewing and human 'ultra-sociality' (Boyd and Richardson 1998), describing how empathy is supported by mirror resonances but also modified by appraisal mechanisms and how emotions are communicated, It further discusses how 'attainment' to film builds...

  16. Eesti film sai auhindu

    Index Scriptorium Estoniae

    2011-01-01

    Anu Auna film "Vahetus" võitis Rooma sõltumatu filmi festivalil (Rome Independent Film Festival) parima välismaise lühifilmi preemia ning Olga ja Priit Pärna "Elu ilma Gabriella Ferrita" Lissaboni animafilmide festivalil Monstra eripreemia

  17. Dental Training Films.

    Science.gov (United States)

    Veterans Administration Medical Center, Washington, DC.

    This dental training films catalog is organized into two sections. Section I is a category listing of the films by number and title, indexed according to generalized headings; categories are as follow: anatomy, articulator systems, complete dentures, dental assisting, dental laboratory technology, dental materials, dental office emergencies,…

  18. Abstract Film and Beyond.

    Science.gov (United States)

    Le Grice, Malcolm

    A theoretical and historical account of the main preoccupations of makers of abstract films is presented in this book. The book's scope includes discussion of nonrepresentational forms as well as examination of experiments in the manipulation of time in films. The ten chapters discuss the following topics: art and cinematography, the first…

  19. Malaysian Cinema, Asian Film

    NARCIS (Netherlands)

    Heide, van der William

    2002-01-01

    This title series departs from traditional studies of national cinema by accentuating the intercultural and intertextual links between Malaysian films and Asian (as well as European and American) film practices. Using cross-cultural analysis, the author characterizes Malaysia as a pluralist society

  20. Radiographic film package

    Energy Technology Data Exchange (ETDEWEB)

    Muylle, W. E.

    1985-08-27

    A radiographic film package for non-destructive testing, comprising a radiographic film sheet, an intensifying screen with a layer of lead bonded to a paper foil, and a vacuum heat-sealed wrapper with a layer of aluminum and a heat-sealed easy-peelable thermoplastic layer.

  1. On Teaching Ethnographic Film

    Science.gov (United States)

    Clarfield, Geoffrey

    2013-01-01

    The author of this article, a developmental anthropologist, illustrates how the instructor can use ethnographic films to enhance the study of anthropology and override notions about the scope and efficacy of Western intervention in the Third World, provided the instructor places such films in their proper historical and cultural context. He…

  2. The effect of the stretching of PLA extruded films on their crystallinity and gas barrier properties

    Science.gov (United States)

    Guinault, A.; Menary, G. H.; Courgneau, C.; Griffith, D.; Ducruet, V.; Miri, V.; Sollogoub, C.

    2011-05-01

    Driven by environmental concerns, new polymers based on renewable resources are arriving on the market to replace conventional polymers, obtained from petroleum, for different applications like food packaging. One of the most prominent polymers among these materials is poly(lactic acid) (PLA), a biodegradable, thermoplastic, aliphatic polyester derived from renewable resources, such as corn starch (in the USA) or sugarcanes (in the rest of the world). However this polymer presents different disadvantages and especially low gas barrier properties [1]. Thermal crystallization can be used to increase its gas barrier properties but long times are necessary [2] and are not compatible with an industrial process. Another way to increase the gas barrier properties consists in stretching the film in order to increase its crystallinity and so its diffusion coefficient. We have prepared stretched PLA films with different stretch ratio and we have studied the effect of the stretching parameters on the gas barrier properties of PLA films. Finally we compared this process with the isothermal crystallization process by taking into account the crystallinity degree and the crystalline morphology.

  3. Bursting of soap films

    Science.gov (United States)

    Chowdhury, Debashish; Stauffer, Dietrich

    1992-07-01

    Soap films consist of thin films of water in between two monolayers of amphiphilic molecules. Newton black films (NBFs) are the thinnest possible soap films. We have developed a microscopic model of NBFs; this model is a variant of the Widom model for microemulsions. By carrying out Monte Carlo simulations of this model, we have investigated the dependence of the lifetime of the NBFs on (a) the initial concentration of the amphiphilic molecules, (b) the temperature and (c) the bending rigidity of the constituent amphiphilic monolayers. We compare our results with the corresponding experimental observations and suggest further specific experiments. We establish that the “edge energy” of the model bilayer tends to stabilize the NBF; a similar mechanism leads to the well known phenomenon of “self-healing” of small enough holes in pierced vesicles. We also review the laws of growth of holes in soap films during rupture. Finally, we speculate on some other possible applications of our ideas.

  4. Selective inorganic thin films

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, M.L.F.; Weisenbach, L.A.; Anderson, M.T. [Sandia National Laboratories, Albuquerque, NM (United States)] [and others

    1995-05-01

    This project is developing inorganic thin films as membranes for gas separation applications, and as discriminating coatings for liquid-phase chemical sensors. Our goal is to synthesize these coatings with tailored porosity and surface chemistry on porous substrates and on acoustic and optical sensors. Molecular sieve films offer the possibility of performing separations involving hydrogen, air, and natural gas constituents at elevated temperatures with very high separation factors. We are focusing on improving permeability and molecular sieve properties of crystalline zeolitic membranes made by hydrothermally reacting layered multicomponent sol-gel films deposited on mesoporous substrates. We also used acoustic plate mode (APM) oscillator and surface plasmon resonance (SPR) sensor elements as substrates for sol-gel films, and have both used these modified sensors to determine physical properties of the films and have determined the sensitivity and selectivity of these sensors to aqueous chemical species.

  5. Film Tourism in Basilicata

    Directory of Open Access Journals (Sweden)

    Angelo Bencivenga

    2015-03-01

    Full Text Available Film tourism is the phenomenon that is born from the desire to visit film locations, drawing increasing attention in recent years. This paper presents the results of a field research aiming at analysing the effects of the film Basilicata coast to coast, by Rocco Papaleo, on tourism in Basilicata, a small region in the South of Italy, after the film’s success at the box office, winning several Italian awards. The film, made with the active involvement of local institutions and stakeholders, pursues the objective of promoting an area that is still largely unknown to national and international tourists. The romantic and naturalistic atmosphere of Papaleo's film seems to have stimulated the curiosity of tourists and promoted a "dream-like" but truthful image of the region.

  6. Conceiving Landscape through Film

    DEFF Research Database (Denmark)

    Farsø, Mads; Petersen, Rikke Munck

    2015-01-01

    This article shows how the media of film can be integrated, explored and can add value to architectural design studios and practice. It elucidates how film may offer an alternative position in architecture, where landscapes and cities are thought, planned and developed in closer relation...... to their spatial and sensory effects on humans. It underscores that the film camera can work as a kind of amplifier of how we, with our bodies, perceive space and project space. In the “Landscape Film” Studio at University of Copenhagen the film medium was tested as a combined registration and design tool...... for a new Nature Park south of Copenhagen. The final studio films and designs show how resonate recordings of sound, time and a bodily presence may simulate an Einfühling that inspires an alternative architecture of relations: the ambient, the changeable and the volatile. They also emphasize that an ability...

  7. Tuning different kinds of entangled metal-organic frameworks by modifying the spacer group of aliphatic dicarboxylate ligands and the reactant ratio.

    Science.gov (United States)

    Yang, Jin-Xia; Zhai, Ji-Quan; Zhang, Xin; Qin, Ye-Yan; Yao, Yuan-Gen

    2016-01-14

    Taking advantage of the conformational flexibility of the bpp ligand and aliphatic dicarboxylic acids, six interesting entangled coordination polymers, {[Cd(fum)(bpp)(H2O)]·(H2O)}n (), {[Cd(fum)(bpp)2]·(H2O)5}n (), {[Cd2(suc)1.5(bpp)2(NO3)(H2O)2]·6H2O}n (), {[Cd(suc)(bpp)2]·(H2O)1.5}n (), {[Cd2(glu)2(bpp)3]·10H2O}n (), and {Cd(adp)(bpp)(H2O)}n () have been prepared and structurally characterized (bpp = 1,3-bi(4-pyridyl)propane, fum = fumaric, suc = succinate, glu = glutaric, adp = adipic). Compounds and are comprised of undulated 2D 4(4)-sql networks. In the structure of compound , two identical undulated layers are parallelly interpenetrated with each other to give a 2D → 2D interpenetrating framework. For , the dangling arms projected from 2D layers are intercalated into the neighboring sheets, producing a 2D → 3D polythreading framework. Compound shows a rare example of a 2D self-penetrating framework with a (3,4)-connected (4(2)·6(3)·8)(4(2)·6) topology. Compound presents an unusual 2D self-threading network with a novel 4-connected {4(2)·6(3)·8} topology. Compound displays a 3D self-penetrating system based on a 2D → 3D parallel polycatenation array. Compound exhibits an unprecedented 3D self-penetrating structure having both 1D + 1D → 1D polycatenation and 3D + 3D → 3D interpenetration characteristics. A comparison of these six compounds demonstrates that both the different spacer lengths of the aliphatic dicarboxylates and reactant ratios appear to play a significant role in the assembly of entangled frameworks. In addition, thermal stabilities and photoluminescence properties of have been examined in the solid state at room temperature. PMID:26621568

  8. Zinc oxide/polypyrrole nanocomposite as a novel solid phase microextraction coating for extraction of aliphatic hydrocarbons from water and soil samples

    Energy Technology Data Exchange (ETDEWEB)

    Amanzadeh, Hatam; Yamini, Yadollah [Department of Chemistry, Tarbiat Modares University, P.O. Box 14115-175 Tehran (Iran, Islamic Republic of); Moradi, Morteza [Department of Semiconductors, Materials and Energy Research Center, Karaj (Iran, Islamic Republic of)

    2015-07-16

    Highlights: • ZnO/polypyrrole (ZNO/PPY) nanocomposite coating was fabricated on stainless steel. • Nanocomposite coating morphology was evaluated using scanning electron microscopy. • It was applied for HS-SPME of aliphatic hydrocarbons in water and soil samples. • Separation and determination of the hydrocarbons were performed by GC-FID. • The method is suitable for routine analysis of n-alkanes in various environmental samples. - Abstract: In this work, ZnO/PPy nanocomposite coating was fabricated on stainless steel and evaluated as a novel headspace solid phase microextraction (HS-SPME) fiber coating for extraction of ultra-trace amounts of environmental pollutants; namely, aliphatic hydrocarbons in water and soil samples. The ZnO/PPy nanocomposite were prepared by a two-step process including the electrochemical deposition of PPy on the surface of stainless steel in the first step, and the synthesis of ZnO nanorods by hydrothermal process in the pores of PPy matrix in the second step. Porous structure together with ZnO nanorods with the average diameter of 70 nm were observed on the surface by using scanning electron microscopy (SEM). The effective parameters on HS-SPME of hydrocarbons (i.e., extraction temperature, extraction time, desorption temperature, desorption time, salt concentration, and stirring rate) were investigated and optimized by one-variable-at-a-time method. Under optimized conditions (extraction temperature, 65 ± 1 °C; extraction time, 15 min; desorption temperature, 250 °C; desorption time, 3 min; salt concentration, 10% w/v; and stirring rate, 1200 rpm), the limits of detection (LODs) were found in the range of 0.08–0.5 μg L{sup −1}, whereas the repeatability and fiber-to-fiber reproducibility were in the range 5.4–7.6% and 8.6–10.4%, respectively. Also, the accuracies obtained for the spiked n-alkanes were in the range of 85–108%; indicating the absence of matrix effects in the proposed HS-SPME method. The results

  9. Characterization and enhancement of the electrical performance of radiation modified poly (vinyl alcohol/gelatin copolymer films doped with carotene

    Directory of Open Access Journals (Sweden)

    S. Lotfy

    2014-07-01

    Full Text Available A series of poly (vinyl alcohol/gelatin copolymer (PVA/Gel with different entrapped carotene (Carot concentration into the films has been devised. The films were irradiated with γ-rays at dose levels of 10, 50, 100, 150 and 250 kGy. The crystalline and chemical structures of the samples have been studied using XRD and FTIR techniques. The direct current electrical conductivity (σDC has been determined from the proposed sampling before and after gamma exposure. It is clearly demonstrated that the electrical conductivity of PVA/Gel/Carot films was increased from two to three orders of magnitude due to carotene doping, and decreased one order of magnitude due to gamma radiation. The obtained results can be attributed to the existence of the conjugated double bonds in the aliphatic side chain of the carotene molecule. Thus, this work suggests the possibility of the use of the gamma irradiated PVA/Gel/Carot films in different electronic applications.

  10. Chiral atomically thin films

    Science.gov (United States)

    Kim, Cheol-Joo; Sánchez-Castillo, A.; Ziegler, Zack; Ogawa, Yui; Noguez, Cecilia; Park, Jiwoong

    2016-06-01

    Chiral materials possess left- and right-handed counterparts linked by mirror symmetry. These materials are useful for advanced applications in polarization optics, stereochemistry and spintronics. In particular, the realization of spatially uniform chiral films with atomic-scale control of their handedness could provide a powerful means for developing nanodevices with novel chiral properties. However, previous approaches based on natural or grown films, or arrays of fabricated building blocks, could not offer a direct means to program intrinsic chiral properties of the film on the atomic scale. Here, we report a chiral stacking approach, where two-dimensional materials are positioned layer-by-layer with precise control of the interlayer rotation (θ) and polarity, resulting in tunable chiral properties of the final stack. Using this method, we produce left- and right-handed bilayer graphene, that is, a two-atom-thick chiral film. The film displays one of the highest intrinsic ellipticity values (6.5 deg μm-1) ever reported, and a remarkably strong circular dichroism (CD) with the peak energy and sign tuned by θ and polarity. We show that these chiral properties originate from the large in-plane magnetic moment associated with the interlayer optical transition. Furthermore, we show that we can program the chiral properties of atomically thin films layer-by-layer by producing three-layer graphene films with structurally controlled CD spectra.

  11. Dependence of film tension on the thickness of smectic films.

    Science.gov (United States)

    Jaquet, R; Schneider, F

    2003-02-01

    The film tension tau of free standing S(A) films has been measured for films with thicknesses between 2 and 150 layers. There is a clear increase of tau with the thickness for very thin films and a nonlinear slower increase for high thickness. The nonlinearity depends on the amount of liquid crystal accessible to the meniscus of the film during the drawing process. Several models are discussed that describe these effects. PMID:12636700

  12. X-ray film processing

    International Nuclear Information System (INIS)

    X-ray films have to be highly sensitive, for radiation protection reasons. The films used in radiology are coated on both sides with a photosensitive emulsion. This applies to all dental films. Their properties and the development of the different exposed films are explained. (DG)

  13. Biomimetic thin film synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Graff, G.L.; Campbell, A.A.; Gordon, N.R.

    1995-05-01

    The purpose of this program is to develop a new process for forming thin film coatings and to demonstrate that the biomimetic thin film technology developed at PNL is useful for industrial applications. In the biomimetic process, mineral deposition from aqueous solution is controlled by organic functional groups attached to the underlying substrate surface. The coatings process is simple, benign, inexpensive, energy efficient, and particularly suited for temperature sensitive substrate materials (such as polymers). In addition, biomimetic thin films can be deposited uniformly on complex shaped and porous substrates providing a unique capability over more traditional line-of-sight methods.

  14. Feminist Film Theory

    OpenAIRE

    Smelik, A.M.

    2007-01-01

    The developing of film industry has brought us into a complexity of art and business. If the first movie audiences were delighted to see that it was possible to record a moving scene on film; today we debate the desirability behind every movie, rather than just the possibility of capturing an image. Film has already become entertainment tool and communication media with quite powerful effect to influence people at the early 20th century. The problem that happens now is there are not many wome...

  15. Intermetallic semiconducting films

    CERN Document Server

    Wieder, H H

    1970-01-01

    Intermetallic Semiconducting Films introduces the physics and technology of AшВv compound films. This material is a type of a polycrystalline semiconductor that is used for galvanomagnetic device applications. Such material has a high electron mobility that is ideal for generators and magnetoresistors. The book discusses the available references on the preparation and identification of the material. An assessment of its device applications and other possible use is also enumerated. The book describes the structures and physical parts of different films. A section of the book covers the three t

  16. A water film motor

    OpenAIRE

    Shirsavar, R.; Amjadi, A.; Radja, N. Hamedani; Niry, M. D.; Tabar, M. Reza Rahimi; Ejtehadi, M. R.

    2006-01-01

    We report on electrically-induced rotations in water films, which can function at many length scales. The device consists of a two-dimensional cell used for electrolysis of water films, as simple as an insulator frame with two electrodes on the sides, to which an external in-plane electric field perpendicular to the mean electrolysis current density is applied. If either the external field or the electrolysis current exceeds some threshold (while the other one is not zero), the liquid film be...

  17. When Film Meets World

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    After 30 years of reform,the Chinese film industry awaits more progress To celebrate this year’s 60th anniver-sary of the founding of the People’s Republic of China, a stellar cast of China’s top filmmakers and actors are making a film temporarily named Founding a Country. The film stars many household names-Andy Lau, Jiang Wen, Ge You, Vivian Wu, and prestigious directors Chen Kaige and Feng Xiaogang-who all make appearances. Han Sanping is behind the camera.

  18. Correlations Between retention indices and molecular structure of aliphatic alcohols and of their benzoyl derivatives on phenyl substituted polysiloxane stationary phases

    International Nuclear Information System (INIS)

    The retention indices of aliphatic alcohols of carbon number up to Cg, and of their benzoyl derivatives up to C7, were determined in columns packed with Chromo sorb G (AW-DMCS-HP) coated previously with 5% methyl, and methyl phenyl polysiloxanes with increasing polarity (SE-30, 0V-3, 0V-7, 0V-11, 0V-17 and OV-25). Correlations between retention indices and chain length for 1-alcohols, 2-alcohols, 3-alcohols, 1 , on -3-alcohols, 2-methyl-1-alcohols and for their corresponding benzoyl derivatives were calculated at 100, 120 and 140 degree centigree. In alcohols, a -CH2- group increases I approximately 100 units, and in their benzoyl derivatives from 80 to 100 units. Dispersion indices Δl , and positional and structural increments δI, were evaluated for -OH and benzoyl groups in terms of phase polarity and chain length. Effects of chain length, chain branching and double bond location on retention parameters were also studied. (Author) 23 refs

  19. Microbial production of aliphatic (S)-epoxyalkanes by using Rhodococcus sp. strain ST-10 styrene monooxygenase expressed in organic-solvent-tolerant Kocuria rhizophila DC2201.

    Science.gov (United States)

    Toda, Hiroshi; Ohuchi, Takuya; Imae, Ryouta; Itoh, Nobuya

    2015-03-01

    We describe the development of biocatalysis for producing optically pure straight-chain (S)-epoxyalkanes using styrene monooxygenase of Rhodococcus sp. strain ST-10 (RhSMO). RhSMO was expressed in the organic solvent-tolerant microorganism Kocuria rhizophila DC2201, and the bioconversion reaction was performed in an organic solvent-water biphasic reaction system. The biocatalytic process enantioselectively converted linear terminal alkenes to their corresponding (S)-epoxyalkanes using glucose and molecular oxygen. When 1-heptene and 6-chloro-1-hexene were used as substrates (400 mM) under optimized conditions, 88.3 mM (S)-1,2-epoxyheptane and 246.5 mM (S)-1,2-epoxy-6-chlorohexane, respectively, accumulated in the organic phase with good enantiomeric excess (ee; 84.2 and 95.5%). The biocatalysis showed broad substrate specificity toward various aliphatic alkenes, including functionalized and unfunctionalized alkenes, with good to excellent ee. Here, we demonstrate that this biocatalytic system is environmentally friendly and useful for producing various enantiopure (S)-epoxyalkanes. PMID:25556188

  20. Determination of linear aliphatic aldehydes in heavy metal containing waters by high-performance liquid chromatography using 2,4-dinitrophenylhydrazine derivatization.

    Science.gov (United States)

    Lin, Yi-Liang; Wang, Po-Yen; Hsieh, Ling-Ling; Ku, Kuan-Hsuan; Yeh, Yun-Tai; Wu, Chien-Hou

    2009-09-01

    A simple and sensitive method is described for the determination of picomolar amounts of C(1)-C(9) linear aliphatic aldehydes in waters containing heavy metal ions. In this method, aldehydes were first derivatized with 2,4-dinitrophenylhydrazine (DNPH) at optimized pH 1.8 for 30 min and analyzed by HPLC with UV detector at 365 nm. Factors affecting the derivatization reaction of aldehydes and DNPH were investigated. Cupric ion, an example of heavy metals, is a common oxidative reagent, which may oxidize DNPH and greatly interfere with the determination of aldehydes. EDTA was used to effectively mask the interferences by heavy metal ions. The method detection limits for direct injection of derivatized most aldehydes except formaldehyde were of the order of 7-28 nM. The detection limit can be further lowered by using off-line C(18) adsorption cartridge enrichment. The recoveries of C(1)-C(9) aldehydes were 93-115% with a relative standard deviation of 3.6-8.1% at the 0.1 microM level for aldehydes. The HPLC-DNPH method has been applied for determining aldehyde photoproducts from Cu(II)-amino acid complex systems. PMID:19643424

  1. Electrodeposited FePt films

    OpenAIRE

    Rhen, Fernando M. F.; Hinds, Gareth; O'Reilly, Cora; Coey, John Michael David

    2003-01-01

    A novel bath for electrodepositing FePt films was developed and films were electrodeposited on copper substrates with thickness up to 0.45 m. The magnetic and structural properties of the films were measured. The films developed 0.3-T coercivity after annealing at 400 C and formed the 10 FePt phase. Films are shiny and smooth. Morphology was found to be affected by the annealing process.

  2. Heterogeneity in Polymer Thin Films

    OpenAIRE

    Kanaya, Toshiji; Inoue, Rintaro; Nishida, Koji

    2011-01-01

    In the last two decades very extensive studies have been performed on polymer thin films to reveal very interesting but unusual properties. One of the most interesting findings is the decrease in glass transition temperature Tg with film thickness in polystyrene (PS) thin film supported on Si substrate. Another interesting finding is apparent negative thermal expansivity in glassy state for thin films below ∼25 nm. In order to understand the unusual properties of polymer thin films we have st...

  3. Report on three aliphatic dimethylarsinoyl compounds as common minor constituents in marine samples. An investigation using high-performance liquid chromatography inductively coupled plasma mass spectrometry and electrospray ionisation tandem mass spectrometry

    DEFF Research Database (Denmark)

    Sloth, Jens Jørgen; Larsen, Erik Huusfeldt; Julshamn, K.

    2005-01-01

    Three water-soluble aliphatic arsenicals, dimethylarsinoyl acetate (DMAA), dimethylarsinoyl ethanol (DMAE), and dimethylarsinoyl propionate (DMAP), were identified in marine biological samples. Sample extracts in methanol/water (1 + 1) were analysed by cation-exchange high-performance liquid...... chromatography/inductively coupled plasma mass spectrometry (HPLC/ICPMS). Eluate fractions from the HPLC/ICPMS analyses containing the compounds in question were collected and subjected to analysis by electrospray ionisation tandem mass spectrometry (ESI-MS/MS), which provided supportive evidence...

  4. Quantitative film radiography

    International Nuclear Information System (INIS)

    We have developed a system of quantitative radiography in order to produce quantitative images displaying homogeneity of parts. The materials that we characterize are synthetic composites and may contain important subtle density variations not discernible by examining a raw film x-radiograph. In order to quantitatively interpret film radiographs, it is necessary to digitize, interpret, and display the images. Our integrated system of quantitative radiography displays accurate, high-resolution pseudo-color images in units of density. We characterize approximately 10,000 parts per year in hundreds of different configurations and compositions with this system. This report discusses: the method; film processor monitoring and control; verifying film and processor performance; and correction of scatter effects

  5. Thin film device applications

    CERN Document Server

    Kaur, Inderjeet

    1983-01-01

    Two-dimensional materials created ab initio by the process of condensation of atoms, molecules, or ions, called thin films, have unique properties significantly different from the corresponding bulk materials as a result of their physical dimensions, geometry, nonequilibrium microstructure, and metallurgy. Further, these characteristic features of thin films can be drasti­ cally modified and tailored to obtain the desired and required physical characteristics. These features form the basis of development of a host of extraordinary active and passive thin film device applications in the last two decades. On the one extreme, these applications are in the submicron dimensions in such areas as very large scale integration (VLSI), Josephson junction quantum interference devices, magnetic bubbles, and integrated optics. On the other extreme, large-area thin films are being used as selective coatings for solar thermal conversion, solar cells for photovoltaic conver­ sion, and protection and passivating layers. Ind...

  6. Thin Film Microbatteries

    International Nuclear Information System (INIS)

    Thin film batteries are built layer by layer by vapor deposition. The resulting battery is formed of parallel plates, much as an ordinary battery construction, just much thinner. The figure (Fig. 1) shows an example of a thin film battery layout where films are deposited symmetrically onto both sides of a supporting substrate. The full stack of films is only 10 to 15 (micro)m thick, but including the support at least doubles the overall battery thickness. When the support is thin, the entire battery can be flexible. At least six companies have commercialized or are very close to commercializing such all-solid-state thin film batteries and market research predicts a growing market and a variety of applications including sensors, RFID tags, and smarter cards. In principle with a large deposition system, a thin film battery might cover a square meter, but in practice, most development is targeting individual cells with active areas less than 25 cm2. For very small battery areas, 2, microfabrication processes have been developed. Typically the assembled batteries have capacities from 0.1 to 5 mAh. The operation of a thin film battery is depicted in the schematic diagram (Fig. 2). Very simply, when the battery is allowed to discharge, a Li+ ion migrates from the anode to the cathode film by diffusing through the solid electrolyte. When the anode and cathode reactions are reversible, as for an intercalation compound or alloy, the battery can be recharged by reversing the current. The difference in the electrochemical potential of the lithium determines the cell voltage. Most of the thin films used in current commercial variations of this thin film battery are deposited in vacuum chambers by RF and DC magnetron sputtering and by thermal evaporation onto unheated substrates. In addition, many publications report exploring a variety of other physical and chemical vapor deposition processes, such as pulsed laser deposition, electron cyclotron resonance sputtering, and

  7. Nanostructured thermoplastic polyimide films

    Science.gov (United States)

    Aglan, Heshmat

    2015-05-19

    Structured films containing multi-walled carbon nanotubes ("MWCNTs") have enhanced mechanical performance in terms of strength, fracture resistance, and creep recovery of polyimide ("PI") films. Preferably, the loadings of MWCNTs can be in the range of 0.1 wt % to 0.5 wt %. The strength of the new PI films dried at 60.degree. C. increased by 55% and 72% for 0.1 wt % MWCNT and 0.5 wt % MWCNT loadings, respectively, while the fracture resistance increased by 23% for the 0.1 wt % MWCNTs and then decreases at a loading of 0.5 wt % MWCNTs. The films can be advantageously be created by managing a corresponding shift in the annealing temperature at which the maximum strength occurs as the MWCNT loadings increase.

  8. Thin film superfluid optomechanics

    CERN Document Server

    Baker, Christopher G; McAuslan, David L; Sachkou, Yauhen; He, Xin; Bowen, Warwick P

    2016-01-01

    Excitations in superfluid helium represent attractive mechanical degrees of freedom for cavity optomechanics schemes. Here we numerically and analytically investigate the properties of optomechanical resonators formed by thin films of superfluid $^4$He covering micrometer-scale whispering gallery mode cavities. We predict that through proper optimization of the interaction between film and optical field, large optomechanical coupling rates $g_0>2\\pi \\times 100$ kHz and single photon cooperativities $C_0>10$ are achievable. Our analytical model reveals the unconventional behaviour of these thin films, such as thicker and heavier films exhibiting smaller effective mass and larger zero point motion. The optomechanical system outlined here provides access to unusual regimes such as $g_0>\\Omega_M$ and opens the prospect of laser cooling a liquid into its quantum ground state.

  9. Fra bog til film

    DEFF Research Database (Denmark)

    Schepelern, Peter

    2010-01-01

    Efter en historisk oversigt over samspillet mellem film og litteratur i dansk film, opstilles en råkke begreber, som filmatiseringer kan analyseres ud fra. Der ses pa det litteråre vårks status — evt. som klassiker eller bestseller. Der ses pa de centrale filmatiseringsproblemer, forhold som pråger...... adaptionsprocessen fra bog til film. De kan opdeles dels i forhold, der udspringer af filmsprogets specifikke sys- tem, dels forhold, der udspringer af filmens status som massemedium. Den färste kategori er pråget af, at filmsproget generelt fremstiller handling snarere end refleksion, noget konkret snarere end...... noget abstrakt, en scene snarere end et resume og det ydre snarere det indre. Den anden kategori kan forklare filmens tilbäjelighed til åndring af forlågget, til forkortelse, forenkling og modernisering. Eksemplerne er en råkke centrale danske film/romaner...

  10. Min Morfars Film

    DEFF Research Database (Denmark)

    Juel, Henrik

    1957-01-01

    Reflektioner over filmhistoriebegrebet og gennemgang af konkrete filmoplevelser i 1957 og i nutiden med udgangspunkt i mødet med en gammel familiefilm. Reflektioner over valg af motiver i en social- og personhistorisk dateret film.......Reflektioner over filmhistoriebegrebet og gennemgang af konkrete filmoplevelser i 1957 og i nutiden med udgangspunkt i mødet med en gammel familiefilm. Reflektioner over valg af motiver i en social- og personhistorisk dateret film....

  11. 脂肪族含氧有机物沸点的定量构效关系%Quantitative structure-property relationship of normal boiling point of aliphatic oxygen-containing organic compounds

    Institute of Scientific and Technical Information of China (English)

    刘万强; 曹晨忠

    2012-01-01

    The descriptors of polarizability effect index (PEI),the number of effective carbon (Nc,e(f)> the differences in PEI and Nc,eff between the branching chain and straight chain isomers,SPEI and δ Nc,eff,are derived from molecular structure. The quantitative structure-property relationships (QSPRs) between these descriptors and boiling points of 520 aliphatic alcohols,ethers,aldehydes,ketones,acids,and esters were obtained separately. The QSPRs between these descriptors and boiling points were developed for 520 aliphatic oxygen-containing organic compounds by best subsets regression method. For the training set,the correlation coefficient R2 is 0. 9946 and the standard deviation GO is 6. 70 K. For the test set,R2 is 0. 9857 and s is 6. 10 K. The average relative error is 1. 19%. According to the regression equation,the influences of the number of effective carbon of alkyl,the role of functional groups and their interaction on the boiling point were analyzed. These results showed a good correlation between the boiling points of organic compounds and these descriptors derived from PEI for aliphatic alcohols,ethers,aldehydes,ketones,acids,and esters.

  12. Capacitor film surface assessment studies

    Science.gov (United States)

    Galperin, I.; White, W.

    1985-02-01

    In the present investigation of the optical surface of the three widely used, biaxially oriented capacitor films, polypropylene, polyvinylidene fluoride, and polyester, with attention to film surface defects and thickness variation, the defects and their rate of occurrence proved traceable in terms of polymer structure, chemical grouping, and fabrication processing. Film thickness variation was small, yet differed for each film type. Film breakdown voltages have been determined, and alternative causes for the voltage values obtained are proposed. A reciprocal relation is noted between the film breakdown voltage and the dielectric constant.

  13. Thin films and nanomaterials

    International Nuclear Information System (INIS)

    The objective of this book is to disseminate the most recent research in Thin Films, Nanomaterials, Corrosion and Metallurgy presented at the International Conference on Advanced Materials (ICAM 2011) held in PSG College of Technology, Coimbatore, India during 12-16 December 2011. The book is a compilation of 113 chapters written by active researchers providing information and critical insights into the recent advancements that have taken place. Important new applications are possible today in the fields of microelectronics, opto-electronics, metallurgy and energy by the application of thin films on solid surfaces. Recent progress in high vacuum technology and new materials has a remarkable effect in thin film quality and cost. This has led to the development of new single or multi-layered thin film devices with diverse applications in a multitude of production areas, such as optics, thermal barrier coatings and wear protections, enhancing service life of tools and to protect materials against thermal and atmospheric influence. On the other hand, thin film process techniques and research are strongly related to the basic research activities in nano technology, an increasingly important field with countless opportunities for applications due to the emergence of new properties at the nanoscale level. Materials and structures that are designed and fabricated at the nano scale level, offer the potential to produce new devices and processes that may enhance efficiencies and reduce costs in many areas, as photovoltaic systems, hydrogen storage, fuel cells and solar thermal systems. In the book, the contributed papers are classified under two sections i) thin films and ii) nanomaterials. The thin film section includes single or multi layer conducting, insulating or semiconducting films synthesized by a wide variety of physical or chemical techniques and characterized or analyzed for different applications. The nanomaterials section deals with novel or exciting materials

  14. Influence of season and salinity on the exudation of aliphatic low molecular weight organic acids (ALMWOAs) by Phragmites australis and Halimione portulacoides roots

    Science.gov (United States)

    Rocha, A. Cristina S.; Almeida, C. Marisa R.; Basto, M. Clara P.; Vasconcelos, M. Teresa S. D.

    2015-01-01

    Plant roots have the ability to produce and secrete substances, such as aliphatic low molecular weight organic acids (ALMWOAs), into the rhizosphere. This phenomenon occurs for several purposes, for instance, the detoxification of pollutants. Nevertheless, knowledge about the exudation of such substances from marsh plants roots is still scarce. This work aimed at studying: 1) the ability of marsh plants, freshly collected in estuarine marshes, to liberate ALMWOAs into the surrounding medium and 2) the influence of the physiological cycle of these plants on the exudation of those substances. In vitro experiments were carried out, in different seasons, with Phragmites australis and Halimione portulacoides (two marsh plants widely distributed in Europe). Root exudates were collected in freshwater to which plant specimens, in different physiological stages, were exposed. Both marsh plants were capable of liberating oxalic and citric acids into the surrounding medium. Formic acid was also released by P. australis roots and acetic acid by H. portulacoides. There was a seasonal effect on the liberation of ALMWOAs by both plant roots. Marked changes were registered in the nature and levels of the ALMWOAs liberated and such changes depended upon the season in which the specimens were collected. In growing season, a significantly higher liberation of oxalic and citric acids (and acetic acid but only in H. portulacoides case) was observed. For P. australis, formic acid was only found in the decaying stage (autumn and winter). The nature of the medium (in particular, salinity) was a feature conditioning the exudation of ALMWOAs. Both plants were shown to contribute for the presence of ALMWOAs in marsh rhizosediments (some ALMWOAs were found in pore waters extracted). The nature and extent of this contribution will be however dependent upon plants' physiological stage, in addition to plant species. Therefore, these features should be taken into consideration in the event of

  15. Enhancement of Mechanical and Thermal Properties of Oil Palm Empty Fruit Bunch Fiber Poly(butylene adipate-co-terephtalate) Biocomposites by Matrix Esterification Using Succinic Anhydride

    OpenAIRE

    Samira Siyamak; Nor Azowa Ibrahim; Sanaz Abdolmohammadi; Wan Md Zin Bin Wan Yunus; Mohamad Zaki AB Rahman

    2012-01-01

    In this work, the oil palm empty fruit bunch (EFB) fiber was used as a source of lignocellulosic filler to fabricate a novel type of cost effective biodegradable composite, based on the aliphatic aromatic co-polyester poly(butylene adipate-co-terephtalate) PBAT (EcoflexTM), as a fully biodegradable thermoplastic polymer matrix. The aim of this research was to improve the new biocomposites’ performance by chemical modification using succinic anhydride (SAH) as a coupling agent in the presence ...

  16. Effect of Fiber Esterification on Fundamental Properties of Oil Palm Empty Fruit Bunch Fiber/Poly(butylene adipate-co-terephthalate) Biocomposites

    OpenAIRE

    Mohamad Zaki AB Rahman; Wan Md Zin Wan Yunus; Nor Azowa Ibrahim; Sanaz Abdolmohammadi; Samira Siyamak

    2012-01-01

    A new class of biocomposites based on oil palm empty fruit bunch fiber and poly(butylene adipate-co-terephthalate) (PBAT), which is a biodegradable aliphatic aromatic co-polyester, were prepared using melt blending technique. The composites were prepared at various fiber contents of 10, 20, 30, 40 and 50 wt% and characterized. Chemical treatment of oil palm empty fruit bunch (EFB) fiber was successfully done by grafting succinic anhydride (SAH) onto the EFB fiber surface, and the modified fib...

  17. Structural evolution under uniaxial drawing of Poly(D, L-lactide) Films

    Science.gov (United States)

    Stoclet, Grégory; Lefebvre, Jean-Marc; Seguela, Roland

    2009-03-01

    Aliphatic polyesters are an important class of biodegradable polymers. They have drawn particular attention in the last few years as food packaging materials because they can be derived from renewable resources. Among this family, polylactide (PLA) is considered as one of the most promising ``green'' polymer for use as a substitute to petroleum-based polymers. In the present work, we investigate the mechanical behaviour of amorphous poly(D, L-lactide) films in relation to the structural evolution upon stretching at various draw temperatures (Td) above the glass transition temperature. Examination of the drawing behaviour shows that PLA initially behaves like a rubbery material until a true strain of the order of 1. Strain hardening occurs beyond this strain level, up to film fracture. Such strain hardening is generally ascribed to a strain induced crystallization phenomenon. In the present case, it is clearly more pronounced for Td = 90 C than for Td = 70 C. The corresponding structural evolutions are investigated by means of WAXS. The diffraction patterns reveal the marked influence of draw temperature. Indeed for Td = 70 C a mesophase is induced whereas strain-induced crystallisation takes place at Td = 90 C. Further work is in progress, in order to elucidate mesophase development and mechanical response.

  18. Thin film photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Zweibel, K; Ullal, H S

    1989-05-01

    Thin films are considered a potentially attractive technological approach to making cost-effective electricity by photovoltaics. Over the last twenty years, many have been investigated and some (cadmium telluride, copper indium diselenide, amorphous silicon) have become leading candidates for future large-scale commercialization. This paper surveys the past development of these key thin films and gives their status and future prospects. In all cases, significant progress toward cost-effective PV electricity has been made. If this progress continues, it appears that thin film PV could provide electricity that is competitive for summer daytime peaking power requirements by the middle of the 1990s; and electricity in a range that is competitive with fossil fuel costs (i.e., 6 cents/kilowatt-hour) should be available from PV around the turn of the century. 22 refs., 9 figs.

  19. Electrochemistry of fullerene films

    Energy Technology Data Exchange (ETDEWEB)

    Chlistunoff, J. [Texas Univ., Austin, TX (United States). Dept. of Chemistry and Biochemistry; Cliffel, D. [Texas Univ., Austin, TX (United States). Dept. of Chemistry and Biochemistry; Bard, A.J. [Texas Univ., Austin, TX (United States). Dept. of Chemistry and Biochemistry

    1995-03-01

    The preparation of C{sub 60} films on electrodes by drop coating, Langmuir-Blodgett and electrochemical techniques, and the electrochemical behavior of these films in acetonitrile solutions containing a variety of supporting electrolytes (e.g., quaternary ammonium, alkali metal, and alkaline earth salts) is reviewed. Reduction can form insoluble films with incorporated cations or lead to dissolution. The large splitting between cathodic and anodic waves is discussed in terms of structural rearrange- ments during the redox processes. Studies of C{sub 60} electrodes with the quartz crystal microbalance and with the scanning electrochemical microscope, and by laser-desorption mass spectrometry and surface-enhanced Raman scattering are also discussed. ((orig.))

  20. Thin film interconnect processes

    Science.gov (United States)

    Malik, Farid

    Interconnects and associated photolithography and etching processes play a dominant role in the feature shrinkage of electronic devices. Most interconnects are fabricated by use of thin film processing techniques. Planarization of dielectrics and novel metal deposition methods are the focus of current investigations. Spin-on glass, polyimides, etch-back, bias-sputtered quartz, and plasma-enhanced conformal films are being used to obtain planarized dielectrics over which metal films can be reliably deposited. Recent trends have been towards chemical vapor depositions of metals and refractory metal silicides. Interconnects of the future will be used in conjunction with planarized dielectric layers. Reliability of devices will depend to a large extent on the quality of the interconnects.

  1. Thin film temperature sensor

    Science.gov (United States)

    Grant, H. P.; Przybyszewski, J. S.

    1980-01-01

    Thin film surface temperature sensors were developed. The sensors were made of platinum-platinum/10 percent rhodium thermocouples with associated thin film-to-lead wire connections and sputtered on aluminum oxide coated simulated turbine blades for testing. Tests included exposure to vibration, low velocity hydrocarbon hot gas flow to 1250 K, and furnace calibrations. Thermal electromotive force was typically two percent below standard type S thermocouples. Mean time to failure was 42 hours at a hot gas flow temperature of 1250 K and an average of 15 cycles to room temperature. Failures were mainly due to separation of the platinum thin film from the aluminum oxide surface. Several techniques to improve the adhesion of the platinum are discussed.

  2. Radiographic film cassette unloading apparatus

    International Nuclear Information System (INIS)

    Apparatus for unloading cassettes, containing exposed radiographic films, has means for unfastening the cassettes, an inclined pathway for gravity feeding and rotating feed members (rollers or belts) to propel the films into the processor. (UK)

  3. Thin film metal-oxides

    CERN Document Server

    Ramanathan, Shriram

    2009-01-01

    Presents an account of the fundamental structure-property relations in oxide thin films. This title discusses the functional properties of thin film oxides in the context of applications in the electronics and renewable energy technologies.

  4. Thin films for material engineering

    Science.gov (United States)

    Wasa, Kiyotaka

    2016-07-01

    Thin films are defined as two-dimensional materials formed by condensing one by one atomic/molecular/ionic species of matter in contrast to bulk three-dimensional sintered ceramics. They are grown through atomic collisional chemical reaction on a substrate surface. Thin film growth processes are fascinating for developing innovative exotic materials. On the basis of my long research on sputtering deposition, this paper firstly describes the kinetic energy effect of sputtered adatoms on thin film growth and discusses on a possibility of room-temperature growth of cubic diamond crystallites and the perovskite thin films of binary compound PbTiO3. Secondly, high-performance sputtered ferroelectric thin films with extraordinary excellent crystallinity compatible with MBE deposited thin films are described in relation to a possible application for thin-film MEMS. Finally, the present thin-film technologies are discussed in terms of a future material science and engineering.

  5. Foundation for Film and Science

    Science.gov (United States)

    van der Veen, G.

    1976-01-01

    Provides a comprehensive discussion on the Stichting Film en Wetenschap, SFW (Foundation for Film and Science), in Utrecht. Various aspects of the use of audio-visual aids in university teaching are looked at in detail. (Editor/RK)

  6. Partnervalg på film

    DEFF Research Database (Denmark)

    Kramer, Mette

    2006-01-01

    Nye kognitions- og evolutionspsykologiske aspekter på kvinders filmpræferencer for romantiske film og melodramer......Nye kognitions- og evolutionspsykologiske aspekter på kvinders filmpræferencer for romantiske film og melodramer...

  7. Langmuir-Blodgett films of self-assembled (alkylether-derivatized Zn phthalocyanine)-(C₆₀ imidazole adduct) dyad with controlled intermolecular distance for photoelectrochemical studies.

    Science.gov (United States)

    Obraztsov, Ievgen; Noworyta, Krzysztof; Hart, Aaron; Gobeze, Habtom B; Kc, Chandra B; Kutner, Wlodzimierz; D'Souza, Francis

    2014-06-11

    A multilayer Langmuir-Blodgett (LB) film of the self-assembled electron donor-acceptor dyad of Zn phthalocyanine, appended with four long-chain aliphatic ether peripheral substituents, and an imidazole adduct of C60 was prepared and applied as a photoactive material in a photoelectrochemical cell. Changes in the simultaneously recorded surface pressure and surface potential vs area per molecule compression isotherms for Langmuir films of the dyad and, separately, of its components helped to identify phase transitions and mutual interactions of molecules in films. The Brewster angle microscopy (BAM) imaging of the Langmuir films showed circular condensed phase domains of the dyad molecules. The determined area per molecule was lower than that estimated for the dyad and its components, separately. The multilayer LB films of the dyad were transferred onto hydrophobized fluorine-doped tin oxide-coated (FTO) glass slides under different conditions. The presence of both components in the dyad LB films was confirmed with the UV-vis spectroscopy measurements. For the LB films transferred at different surface pressures, the PM-IRRAS measurements revealed that the phthalocyanine macrocycle planes and ether moieties in films were tilted with respect to the FTO surface. The AFM imaging of the LB films indicated formation of relatively uniform dyad LB films. Then, the femtosecond transient absorption spectral studies evidenced photoinduced electron transfer in the LB film. The obtained transient signals corresponding to both Zn(TPPE)(•+) and C60im(•-) confirmed the occurrence of intramolecular electron transfer. The determined rate constants of charge separation, kcs = 2.6 × 10(11) s(-1), and charge recombination, kcr = 9.7 × 10(9) s(-1), indicated quite efficient electron transfer within the film. In the photoelectrochemical studies, either photoanodic or photocathodic current was generated depending on the applied bias potential when the dyad LB film-coated FTO was used

  8. Wideband film polarizer design

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The reflection and transmittance of s- and p-polarized lights should be treated separately at nonzero angle incidence.By choosing two special film materials whose refractive indices meet the Brewster condition in a given incident angle,the reflection of p-polarized light can be eliminated.When the two materials are fabricated into multilayer stacks,the reflection of s-polarized light can be largely increased while the reflection of p-polarized light keeps low.According to this principle,a film polarizer with bandwidth of 198 nm or even more is designed.

  9. Thin film ceramic thermocouples

    Science.gov (United States)

    Gregory, Otto (Inventor); Fralick, Gustave (Inventor); Wrbanek, John (Inventor); You, Tao (Inventor)

    2011-01-01

    A thin film ceramic thermocouple (10) having two ceramic thermocouple (12, 14) that are in contact with each other in at least on point to form a junction, and wherein each element was prepared in a different oxygen/nitrogen/argon plasma. Since each element is prepared under different plasma conditions, they have different electrical conductivity and different charge carrier concentration. The thin film thermocouple (10) can be transparent. A versatile ceramic sensor system having an RTD heat flux sensor can be combined with a thermocouple and a strain sensor to yield a multifunctional ceramic sensor array. The transparent ceramic temperature sensor that could ultimately be used for calibration of optical sensors.

  10. Current Film Periodicals in English. Revised Edition.

    Science.gov (United States)

    Reilly, Adam, Comp.

    This bibliography of about 200 periodicals dealing with film covers several types of magazine: scholarly journals on film aesthetics, like "The Film Journal"; news notes for movie fans, like "Film Nut News"; magazines which cover films as well as the other arts, like "Cue" and "After Dark"; film education periodicals, like "Media and Methods";…

  11. Immobilization and stretching of 5'-pyrene-terminated DNA on carbon film deposited on electron microscope grid.

    Science.gov (United States)

    Loukanov, Alexandre; Filipov, Chavdar; Lecheva, Marta; Emin, Saim

    2015-11-01

    The immobilization and stretching of randomly coiled DNA molecules on hydrophobic carbon film is a challenging microscopic technique, which possess various applications, especially for genome sequencing. In this report the pyrenyl nucleus is used as an anchor moiety to acquire higher affinity of double stranded DNA to the graphite surface. DNA and pyrene are joined through a linker composed of four aliphatic methylene groups. For the preparation of pyrene-terminated DNA a multifunctional phosphoramidite monomer compound was designed. It contains pyrenylbutoxy group as an anchor moiety for π-stacking attachment to the carbon film, 2-cyanoethyloxy, and diisopropylamino as coupling groups for conjugation to activated oligonucleotide chain or DNA molecule. This monomer derivative was suitable for incorporation into automated solid-phase DNA synthesis and was attached to the 5' terminus of the DNA chain through a phosphodiester linkage. The successful immobilization and stretching of pyrene-terminated DNA was demonstrated by conventional 100 kV transmission electron microscope. The microscopic analysis confirmed the stretched shape of the negatively charged nucleic acid pieces on the hydrophobic carbon film. PMID:26303786

  12. Rare Earth Oxide Thin Films

    CERN Document Server

    Fanciulli, Marco

    2007-01-01

    Thin rare earth (RE) oxide films are emerging materials for microelectronic, nanoelectronic, and spintronic applications. The state-of-the-art of thin film deposition techniques as well as the structural, physical, chemical, and electrical properties of thin RE oxide films and of their interface with semiconducting substrates are discussed. The aim is to identify proper methodologies for the development of RE oxides thin films and to evaluate their effectiveness as innovative materials in different applications.

  13. Film beyond boundaries: film, migrant narratives and other media Film beyond boundaries: film, migrant narratives and other media

    OpenAIRE

    Anelise Reich Corseuil

    2008-01-01

    The articles here presented are representative of the debates about the various transformational aspects of film studies, fostering the discussion about the transformations and interactions between national and international narrative forms, the interrelations between film and literature, and film with other media. The critical perspectives here presented range from an emphasis on cultural materialism, dialogism, reception theory, deconstructionism, narrative studies to film aesthetics or fil...

  14. Critical Thickness in Dewetting Films

    OpenAIRE

    Du, B; Z. Yang; Tsui, O. K. C.

    2001-01-01

    We study dewetting of thin polymer films with built-in topographical fluctuations produced by rubbing the film surface with a rayon cloth. By varying the density of imposed surface defects, we unambiguously distinguish spinodal dewetting, which dominates in liquid films thinner than a characteristic thickness = 13.3 nm, from heterogeneous nucleation in the thicker films. Invariance of this characteristic thickness upon more than a decade change in the defect density makes kinetic effect an un...

  15. Thin functional conducting polymer films

    OpenAIRE

    Tian, S.

    2005-01-01

    In the present study, thin functional conducting polyaniline (PANI) films, either doped or undoped, patterned or unpatterned, were prepared by different approaches. The properties of the obtained PANI films were investigated in detail by a combination of electrochemistry with several other techniques, such as SPR, QCM, SPFS, diffraction, etc. The sensing applications (especially biosensing applications) of the prepared PANI films were explored. Firstly, the pure PANI films were prepar...

  16. Surface Forces in Foam Films

    OpenAIRE

    Wang, Liguang

    2006-01-01

    Fundamental studies of surface forces in foam films are carried out to explain the stability of foams and froths in froth flotation. The thin film pressure balance (TFPB) technique was used to study the surface forces between air bubbles in water from equilibrium film thickness and dynamic film thinning measurements. The results were compared with the disjoining pressure predicted from the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The contribution from the non-DLVO force was estimated b...

  17. Wetting film dynamics and stability

    OpenAIRE

    Radoev, B.; Stoeckelhuber, K. W.; Tsekov, R.; Letocart, P

    2011-01-01

    Although the wetting films are similar in many aspects to other thin liquid films, there are some differences in their behavior, too. In contrast to soap and emulsion films, whose surfaces are homogeneous, solid substrates of wetting films are heterogeneous as a rule, unless special measures for their homogenization are taken. Here we mean primarily heterogeneous distribution of surface energy leading to existence of hydrophobic domains on hydrophilic surfaces and vice versa. As is known, suc...

  18. NMR characterization of thin films

    Science.gov (United States)

    Gerald, II, Rex E.; Klingler, Robert J.; Rathke, Jerome W.; Diaz, Rocio; Vukovic, Lela

    2008-11-25

    A method, apparatus, and system for characterizing thin film materials. The method, apparatus, and system includes a container for receiving a starting material, applying a gravitational force, a magnetic force, and an electric force or combinations thereof to at least the starting material, forming a thin film material, sensing an NMR signal from the thin film material and analyzing the NMR signal to characterize the thin film of material.

  19. Antikken på film

    DEFF Research Database (Denmark)

    Krasilnikoff, Jens

    2012-01-01

    Review af forskning om den græsk-romerske oldtid på film. Dertil en skitse til videre arbejde med antikken på film ud fra et historiefagligt og kulturhistorisk udgangspunkt.......Review af forskning om den græsk-romerske oldtid på film. Dertil en skitse til videre arbejde med antikken på film ud fra et historiefagligt og kulturhistorisk udgangspunkt....

  20. Longevity Of Dry Film Lubricants

    Science.gov (United States)

    Kannel, J. W.; Stockwell, R. D.

    1993-01-01

    Report describes evaluation of dry film lubricants candidate for use in rotary joints of proposed Space Station. Study included experiments and theoretical analyses focused on longevity of sputtered molybdenum disulfide films and ion-plated lead films under conditions partially simulating rolling contact.

  1. Reading Lawyer Films Comment lire les films juridiques

    OpenAIRE

    James Elkins

    2012-01-01

    With the advent of film studies in the United States, there has been a growing interest in legal academic circles in lawyer, legal, and courtroom films. In Professor Elkins’s essay, we find a claim that Hollywood lawyer films have pedagogical value.With the emerging interest in lawyer and legal films, there is virtually nothing written about what or how films are to be taught, and what their value might be. Professor Elkins provides the basic axioms for a humanistic approach to reading lawyer...

  2. Methods for producing complex films, and films produced thereby

    Science.gov (United States)

    Duty, Chad E.; Bennett, Charlee J. C.; Moon, Ji -Won; Phelps, Tommy J.; Blue, Craig A.; Dai, Quanqin; Hu, Michael Z.; Ivanov, Ilia N.; Jellison, Jr., Gerald E.; Love, Lonnie J.; Ott, Ronald D.; Parish, Chad M.; Walker, Steven

    2015-11-24

    A method for producing a film, the method comprising melting a layer of precursor particles on a substrate until at least a portion of the melted particles are planarized and merged to produce the film. The invention is also directed to a method for producing a photovoltaic film, the method comprising depositing particles having a photovoltaic or other property onto a substrate, and affixing the particles to the substrate, wherein the particles may or may not be subsequently melted. Also described herein are films produced by these methods, methods for producing a patterned film on a substrate, and methods for producing a multilayer structure.

  3. Screen Printed PZT Thick Films Using Composite Film Technology

    OpenAIRE

    Dorey, R; Whatmore, R; Beeby, S. P.; Torah, R; White, N.

    2003-01-01

    A spin coating composite sol gel technique for producing lead zirconate titanate (PZT) thick films has been modified for use with screen printing techniques. The resulting screen printing technique can be used to produce 10 ?m thick films in a single print. The resultant films are porous but the density can be increased through the use of repeated sol infiltration/pyrolysis treatments to yield a high density film. When fired at 710°C the composite screen printed films have dielectric and piez...

  4. Scientific Opinion on the safety and efficacy of primary aliphatic saturated or unsaturated alcohols/aldehydes/acids/acetals/esters with a second primary, secondary or tertiary oxygenated functional group including aliphatic lactones (chemical group 9 when used as flavourings for all animal species

    Directory of Open Access Journals (Sweden)

    EFSA Panel on Additives and Products or Substances used in Animal Feed (FEEDAP

    2012-10-01

    Full Text Available

    Chemical group 9 consists of primary aliphatic saturated or unsaturated alcohols/aldehydes/acids/acetals/esters with a second primary, secondary or tertiary oxygenated functional group including aliphatic lactones, of which 30 are currently authorised for use as flavours in food. The FEEDAP Panel was unable to perform an assessment of 2-oxopropanal because of issues related to the purity of the compound. The FEEDAP Panel concludes that lactic acid, succinic acid, fumaric acid, 4-oxovaleric acid, ethyl lactate, butyl lactate, butyl-O-butyryllactate, hex-3-enyl lactate, hexyl lactate, ethyl acetoacetate, ethyl 4-oxovalerate, diethylsuccinate and diethyl malonate are considered to be safe for all animal species at the use levels proposed when used as feed flavourings; octano-1,4-lactone, nonano-1,4-lactone, decano-1,4-lactone and undecano-1,4-lactone are safe at 20 mg/kg complete feed; butyro-1,4-lactone, pentano-1,4-lactone, hexano-1,4-lactone, heptano-1,4-lactone, octano-1,5-lactone, nonano-1,5-lactone, decano-1,5-lactone and undecano-1,5-lactone at 5 mg/kg complete feed; dodecano-1,4-lactone, dodecano-1,5-lactone, tetradecano-1,5-lactone, and pentadecano-1,15-lactone at a maximum of 1.5 mg/kg complete feed for cattle, salmonids and non food producing animals and of 1 mg/kg complete feed for pigs and poultry. No safety concern was identified for the consumer from the use of compounds belonging to CG 9 up to the highest safe level in feedingstuffs for all animal species. All compounds should be considered as irritants to skin, eyes and respiratory tract, and as skin sensitizers. The compounds do not pose a risk to the environment when used at concentrations considered safe for the target species. Since all compounds are used in food as flavourings, no further demonstration of efficacy is necessary.

  5. Filmens krop, kroppens film

    DEFF Research Database (Denmark)

    Moestrup, Steffen Damkjær

    2014-01-01

    Vi har i nyere tid set en lind strøm af dokumentarfilm, der iscenesætter afvigende kroppe. Det gælder film som Shape of the Shapeless (2010), Herbstgold (2010), Beating Time (2010), Planet of Snail (2011), Whole (2003) og Kinbaku – the Art of Bondage (2009). Fælles for filmene er, at de dels...

  6. Rating Films on TV.

    Science.gov (United States)

    Herman, Ginette; Leyens, Jacques-Philippe

    1977-01-01

    An analysis of the film viewing habits of Belgian television viewers reveals that movies with advisories regarding sex and violence are watched more than the movies without them. However, movies with qualifications tend to be judged less interesting than movies without qualifications. (JMF)

  7. FILM I KUFFERTEN

    DEFF Research Database (Denmark)

    Johansen, Stine Liv; Hansen, Adriana Maria

    2013-01-01

    kulturen, medierne er i kulturen – også i legekulturen. Denne rapport beskriver og undersøger et særligt eksempel på medialiseret leg. På baggrund af feltstudier i fem danske børnehaver, hvor et nyt filmpædagogisk materiale – Film i Kufferten - introduceres, er det rapportens formål at eksemplificere...

  8. Bond percolation in films

    Science.gov (United States)

    Korneta, W.; Pytel, Z.

    1988-04-01

    Bond percolation in films with simple cubic structure is considered. It is assumed that the probability of a bond being present between nearest-neighbor sites depends on the distances to surfaces. Based on the relation between the Potts model and the bond percolation model, and using the mean-field approximation, the phase diagram and profiles of the percolation probability have been obtained.

  9. Protein Thin Film Machines

    OpenAIRE

    Federici, Stefania; Oliviero, Giulio; Hamad-Schifferli, Kimberly; Bergese, Paolo

    2010-01-01

    We report the first example of microcantilever beams that are reversibly driven by protein thin film machines fuelled by cycling the salt concentration of the surrounding solution. We also show that upon the same salinity stimulus the drive can be completely reversed in its direction by introducing a surface coating ligand. Experimental results are throughout discussed within a general yet simple thermodynamic model.

  10. Diamond films: Historical perspective

    Energy Technology Data Exchange (ETDEWEB)

    Messier, R. [Pennsylvania State Univ., University Park (United States)

    1993-01-01

    This section is a compilation of notes and published international articles about the development of methods of depositing diamond films. Vapor deposition articles are included from American, Russian, and Japanese publications. The international competition to develop new deposition methodologies is stressed. The current status of chemical vapor deposition of diamond is assessed.

  11. "Gudbai, Lenin!" - film goda

    Index Scriptorium Estoniae

    2003-01-01

    Euroopa Filmiakadeemia tänavused auhinnasaajad : Saksa film "Good bye, Lenin!" võitis 6 auhinda, kaasaarvatud parima filmi tiitel. Parim režissöör - Lars von Trier "Dogville'i" eest, aasta üllatus - Andrei Zvjagintsevi "Tagasitulek"

  12. Thirty Unforgettable Chinese Films

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The film portrays in a realistic mode to the life some ordinary people living at the bottom of society including prostitutes, singing girls, trumpeter,newspaper pedlars, barbers and news-stand owners, depicting their bitter life and miserable fate. It shows profound humanistic solicitude.

  13. Intercultural Training with Films

    Science.gov (United States)

    Roell, Christine

    2010-01-01

    Films are a great medium to use not only to practice English, but also to facilitate intercultural learning. Today English is a global language spoken by people from many countries and cultural backgrounds. Since culture greatly impacts communication, it is helpful for teachers to introduce lessons and activities that reveal how different…

  14. Esilinastub film Kursi koolkonnast

    Index Scriptorium Estoniae

    2005-01-01

    Tartu kunstimajas esilinastub täna dokumentaalfilm kunstnike rühmitusest "Kursi koolkonna fenomen" : stsenaristid Ants Juske ja Ilmar Kruusamäe : režissöörid Rein Raamat ja Peeter Brambat : operaatorid Arvo Vilu ja Erik Norkroos : Raamat-Film 2005

  15. Surrealism and Film.

    Science.gov (United States)

    Matthews, J. H.

    This book is a critical, genre study of surrealist films including a general discussion of the backgrounds, influences, and overall traits of surrealism as a mode of artistic response to an absurdist world. Citing the impetus of Jacques Vache and Andre Breton as the originators of surrealism, the work expands upon the themes of fractured realism…

  16. Thin film mechanics

    Science.gov (United States)

    Cooper, Ryan C.

    This doctoral thesis details the methods of determining mechanical properties of two classes of novel thin films suspended two-dimensional crystals and electron beam irradiated microfilms of polydimethylsiloxane (PDMS). Thin films are used in a variety of surface coatings to alter the opto-electronic properties or increase the wear or corrosion resistance and are ideal for micro- and nanoelectromechanical system fabrication. One of the challenges in fabricating thin films is the introduction of strains which can arise due to application techniques, geometrical conformation, or other spurious conditions. Chapters 2-4 focus on two dimensional materials. This is the intrinsic limit of thin films-being constrained to one atomic or molecular unit of thickness. These materials have mechanical, electrical, and optical properties ideal for micro- and nanoelectromechanical systems with truly novel device functionality. As such, the breadth of applications that can benefit from a treatise on two dimensional film mechanics is reason enough for exploration. This study explores the anomylously high strength of two dimensional materials. Furthermore, this work also aims to bridge four main gaps in the understanding of material science: bridging the gap between ab initio calculations and finite element analysis, bridging the gap between ab initio calculations and experimental results, nanoscale to microscale, and microscale to mesoscale. A nonlinear elasticity model is used to determine the necessary elastic constants to define the strain-energy density function for finite strain. Then, ab initio calculations-density functional theory-is used to calculate the nonlinear elastic response. Chapter 2 focuses on validating this methodology with atomic force microscope nanoindentation on molybdenum disulfide. Chapter 3 explores the convergence criteria of three density functional theory solvers to further verify the numerical calculations. Chapter 4 then uses this model to investigate

  17. [Spectral emissivity of thin films].

    Science.gov (United States)

    Zhong, D

    2001-02-01

    In this paper, the contribution of multiple reflections in thin film to the spectral emissivity of thin films of low absorption is discussed. The expression of emissivity of thin films derived here is related to the thin film thickness d and the optical constants n(lambda) and k(lambda). It is shown that in the special case d-->infinity the emissivity of thin films is equivalent to that of the bulk material. Realistic numerical and more precise general numerical results for the dependence of the emissivity on d, n(lambda) and k(lambda) are given.

  18. Ion beam assisted film growth

    CERN Document Server

    Itoh, T

    2012-01-01

    This volume provides up to date information on the experimental, theoretical and technological aspects of film growth assisted by ion beams.Ion beam assisted film growth is one of the most effective techniques in aiding the growth of high-quality thin solid films in a controlled way. Moreover, ion beams play a dominant role in the reduction of the growth temperature of thin films of high melting point materials. In this way, ion beams make a considerable and complex contribution to film growth. The volume will be essential reading for scientists, engineers and students working in thi

  19. Handbook of thin film technology

    CERN Document Server

    Frey, Hartmut

    2015-01-01

    “Handbook of Thin Film Technology” covers all aspects of coatings preparation, characterization and applications. Different deposition techniques based on vacuum and plasma processes are presented. Methods of surface and thin film analysis including coating thickness, structural, optical, electrical, mechanical and magnetic properties of films are detailed described. The several applications of thin coatings and a special chapter focusing on nanoparticle-based films can be found in this handbook. A complete reference for students and professionals interested in the science and technology of thin films.

  20. Reflections on using film in fieldwork

    OpenAIRE

    Macfarlane, Alan

    2003-01-01

    The history of my early filming and photography on an 8mm film camera, 1968-1987 Filming on video from 1988; the advantages What should one film? Finding a theme Filming and editing in the 1990's; the bulk of the film. Which kinds of film are effective? The unities of time, place and subject The value of showing films in the village; what interested the villagers Using film in teaching; the idea of surrogate fieldwork or 'virtual reality day' Making films about h...

  1. Thermal Properties of Aliphatic Polypeptoids

    Directory of Open Access Journals (Sweden)

    Corinna Fetsch

    2013-01-01

    Full Text Available A series of polypeptoid homopolymers bearing short (C1–C5 side chains of degrees of polymerization of 10–100 are studied with respect to thermal stability, glass transition and melting points. Thermogravimetric analysis of polypeptoids suggests stability to >200 °C. The study of the glass transition temperatures by differential scanning calorimetry revealed two dependencies. On the one hand an extension of the side chain by constant degree of polymerization decrease the glass transition temperatures (Tg and on the other hand a raise of the degree of polymerization by constant side chain length leads to an increase of the Tg to a constant value. Melting points were observed for polypeptoids with a side chain comprising not less than three methyl carbon atoms. X-ray diffraction of polysarcosine and poly(N-ethylglycine corroborates the observed lack of melting points and thus, their amorphous nature. Diffractograms of the other investigated polypeptoids imply that crystalline domains exist in the polymer powder.

  2. Thermal Properties of Aliphatic Polypeptoids

    KAUST Repository

    Fetsch, Corinna

    2013-01-29

    A series of polypeptoid homopolymers bearing short (C1-C5) side chains of degrees of polymerization of 10-100 are studied with respect to thermal stability, glass transition and melting points. Thermogravimetric analysis of polypeptoids suggests stability to >200 °C. The study of the glass transition temperatures by differential scanning calorimetry revealed two dependencies. On the one hand an extension of the side chain by constant degree of polymerization decrease the glass transition temperatures (Tg) and on the other hand a raise of the degree of polymerization by constant side chain length leads to an increase of the Tg to a constant value. Melting points were observed for polypeptoids with a side chain comprising not less than three methyl carbon atoms. X-ray diffraction of polysarcosine and poly(N-ethylglycine) corroborates the observed lack of melting points and thus, their amorphous nature. Diffractograms of the other investigated polypeptoids imply that crystalline domains exist in the polymer powder. © 2013 by the authors.

  3. 酯交换法制备可生物降解脂肪族聚碳酸酯及其应用的研究进展%Progress in Synthesis of Biodegradable Aliphatic Polycarbonate by Transesterification

    Institute of Scientific and Technical Information of China (English)

    朱文祥; 李春成; 张栋; 肖耀南; 管国虎

    2011-01-01

    Aliphatic polycarbonates(APC)have attracted considerable attention as an important class of biodegradable polymers for their favorable biodegradability, biocompatibility and mechanical properties. APC are generally synthesized by the following four methods. (1)reaction of aliphatic diols with phosgene, (2) ring-opening polymerization of cyclic carbonates, (3) polymerization of epoxides with carbon dioxide,or(4)transesterification of dialkyl carbonates with aliphatic diols. Recently, there are lots of reports on synthesizing APC by methods(2)and(3),while there are not so many reports on method (4). This paper reviews the synthesis and application of APC,and the emphasis is placed on progress in synthesizing APC by transesterification.%脂肪族聚碳酸酯(APC)作为一类重要的可生物降解高分子材料,具有良好的生物降解性、生物相容性和物理机械性能,受到人们的广泛关注。APC的制备方法主要有光气法、开环聚合法、二氧化碳/环氧化物共聚法和酯交换法。近年来,有关开环聚合法和二氧化碳/环氧化物共聚法制备APC的研究越来越多,而酯交换法制备APC的研究相对较少。本文综述APC的合成方法和应用,并着重介绍酯交换法制备APC的研究进展。

  4. Dosimetry effects of film packing

    International Nuclear Information System (INIS)

    Full text: Dosimetric artefacts in film based dosimetry have been addressed by a number of authors. We have investigated the influence on film dose results, of a number of materials that are commonly packed against the film including, solid water, paper, air and plastic. The results indicate that variations in optical density occur due to the character and relative quantity of the packing material as well as the film itself. Kodak X-omat V and GAFChromic film samples were placed in a solid water cassette with packing sheets of various materials placed in contact with the film. Photon and electron exposures were carried out with various film orientation and beam qualities. Results have been obtained for solid water, paper and air. An example of the relative change in film density as a function of depth due to four paper sheets packed adjacent to a film aligned with the central axis of a 6MV photon beam is shown. Other results indicate dose variation can be attributed to Cerenkov radiation. Packing materials in contact or in close proximity with dosimetric film, contribute to optical density variations of the order of several percent. Careful consideration of these effects is necessary when using film in high accuracy dosimetry. Copyright (2001) Australasian College of Physical Scientists and Engineers in Medicine

  5. Professor Camillo Negro's Neuropathological Films.

    Science.gov (United States)

    Chiò, Adriano; Gianetto, Claudia; Dagna, Stella

    2016-01-01

    Camillo Negro, Professor in Neurology at the University of Torino, was a pioneer of scientific film. From 1906 to 1908, with the help of his assistant Giuseppe Roasenda and in collaboration with Roberto Omegna, one of the most experienced cinematographers in Italy, he filmed some of his patients for scientific and educational purposes. During the war years, he continued his scientific film project at the Military Hospital in Torino, filming shell-shocked soldiers. In autumn 2011, the Museo Nazionale del Cinema, in partnership with the Faculty of Neurosciences of the University of Torino, presented a new critical edition of the neuropathological films directed by Negro. The Museum's collection also includes 16 mm footage probably filmed in 1930 by Doctor Fedele Negro, Camillo's son. One of these films is devoted to celebrating the effects of the so-called "Bulgarian cure" on Parkinson's disease.

  6. Professor Camillo Negro's Neuropathological Films.

    Science.gov (United States)

    Chiò, Adriano; Gianetto, Claudia; Dagna, Stella

    2016-01-01

    Camillo Negro, Professor in Neurology at the University of Torino, was a pioneer of scientific film. From 1906 to 1908, with the help of his assistant Giuseppe Roasenda and in collaboration with Roberto Omegna, one of the most experienced cinematographers in Italy, he filmed some of his patients for scientific and educational purposes. During the war years, he continued his scientific film project at the Military Hospital in Torino, filming shell-shocked soldiers. In autumn 2011, the Museo Nazionale del Cinema, in partnership with the Faculty of Neurosciences of the University of Torino, presented a new critical edition of the neuropathological films directed by Negro. The Museum's collection also includes 16 mm footage probably filmed in 1930 by Doctor Fedele Negro, Camillo's son. One of these films is devoted to celebrating the effects of the so-called "Bulgarian cure" on Parkinson's disease. PMID:26684422

  7. Thin film superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.

    1995-12-26

    A superconductor magnetic bearing includes a shaft (10) that is subject to a load (L) and rotatable around an axis of rotation, a magnet (12) mounted to the shaft, and a stator (14) in proximity to the shaft. The stator (14) has a superconductor thin film assembly (16) positioned to interact with the magnet (12) to produce a levitation force on the shaft (10) that supports the load (L). The thin film assembly (16) includes at least two superconductor thin films (18) and at least one substrate (20). Each thin film (18) is positioned on a substrate (20) and all the thin films are positioned such that an applied magnetic field from the magnet (12) passes through all the thin films. A similar bearing in which the thin film assembly (16) is mounted on the shaft (10) and the magnet (12) is part of the stator (14) also can be constructed.

  8. Distribution and sources of aliphatic hydrocarbons and fatty acids in surface sediments of a tropical estuary south west coast of India (Cochin estuary).

    Science.gov (United States)

    Gireeshkumar, T R; Deepulal, P M; Chandramohanakumar, N

    2015-03-01

    Surface sediments samples from the Cochin estuary were measured for elemental, stable isotopic and molecular biomarkers (aliphatic hydrocarbons and fatty acids) to study the sources and distribution of sedimentary organic matter. Concentrations of total organic carbon (TOC), total nitrogen (TN) and stable isotopic ratios of carbon (δ(13)C) ranged from 0.62 to 2.74 %, 0.09 to 0.25 % and -27.5 to 21.7 ‰, respectively. Sedimentary n-alkanes ranged from 6.03 to 43.23 μg g(-1) with an average of 16.79 μg g(-1), while total fatty acids varied from 22.55 to 440.69 μg g(-1). The TOC/TN ratios and δ(13)C suggest a mixture of marine- and terrestrial-derived organic matter in the surface sediments with increasing contributions from marine-derived organic matter towards the seaward side. Long-chain n-alkanes derived from higher plants predominated the inner part of the estuary, while short-chain n-alkanes derived from planktonic sources predominated the bar mouth region. The even carbon preference of the C12-C22 n-alkanes may refer to the direct biogenic contribution from bacteria, fungi and yeast species and to the potential direct petroleum inputs. The presence of odd mid-chain n-alkanes in the sediments indicates the organic matter inputs from submerged and floating macrophytes (water hyacinth). Various molecular indices such as carbon preference index, terrestrial to aquatic ratio, average chain length and the ratios of mid-chain n-alkanes support the aforementioned inferences. The high contribution of odd and branched chain fatty acids along with very low contribution of polyunsaturated fatty acids, suggest the effective utilisation of algae-derived organic matter by bacteria and the effective recycling of labile organic matter in whole settling and deposition processes. The distributional variability of n-alkanes and fatty acids reveals the preferential utilisation of marine-derived organic matter and the selective preservation of terrestrial

  9. Long-chain aliphatic wax esters isolated from the sponge Chalinula saudensis (Demospongia along the Jeddah coast of the Red Sea

    Directory of Open Access Journals (Sweden)

    Abdulmohsin Al-Sofyani

    2011-03-01

    Full Text Available The sponge Chalinula saudensis, which occurs along the Jeddah coast, has only recently been isolated and identified. In this study, the total crude organic matter of the sponge was extracted by solvents. The total crude extract was further separated by partitioning it with hexane and water, then with water and chloroform, and finally with water and t-butanol. The chloroform layer was subjected to separation by preparative layer chromatography on silica. One fraction contained four long-chain fatty acid esters, C28H56O2, C30H60O2, C32H62O2 and C36H70 O2. The second ester, C30H60O2, has been identified in the fire corals Millepora dichotoma and Millepora platyphylla. The others have not previously been reported from marine organisms; however similar long-chain esters with different long aliphatic chains and with different molecular weights have been identified from other marine organisms. These compounds are normally waxy and their presence in Chalinula saudensis plays a vital role in the biosynthetic pathways. They also act as insulators against seasonal variations.A esponja Chalinula saudensis ocorre ao longo da costa de Jeddah, Arabia Saudita, mas apenas recentemente foi isolada e identificada. No presente estudo a matéria orgânica total da esponja foi extraída por solventes e o extrato foi separado por partição sucessiva através do emprego de hexano e água, clorofórmio e água e finalmente t-butanol e água. A camada contendo clorofórmio foi então separada por cromatografia em sílica. Os resultados mostraram a presença de ésteres de quatro ácidos graxos de cadeira longa (C28H56O2, C30H60O2, C32H62O2 e C36H70O2, sendo que o segundo deles foi também identificado nos corais Millepora dichotoma e Millepora platyphylla. Não se tem evidência da presença dos demais compostos em outros organismos marinhos, embora haja relatos para ésteres semelhantes de cadeia longa, mas contendo diferentes cadeias alifáticas e diferentes pesos

  10. Analysis of TPH and Aliphatic and Aromatic Hydrocarbons Fractions in Environmental Interest Matrices; Analisis del TPH y las Fracciones de Hidrocarburos Alifaticos y Aromaticos en Matrices de Interes Medioambiental

    Energy Technology Data Exchange (ETDEWEB)

    Pindado, O.; Perez, R. M.; Garcia, S.

    2014-02-01

    Analytical methods to analyze TPH and several aliphatic and aromatic fractions present in soil and groundwater samples contaminated by hydrocarbons are showed. As a part of BIOXISOIL project, analyzing these parameters is fundamental and indispensable to know the initial contamination level, design an adequate method to decontaminate it and eventually assess decontamination accomplished. Analysis of both matrices involve different extraction stages such as microwave radiation, clean up steps based on solid phase extraction and finally a chromatograph analysis with flame ion detector. Analytical procedures have showed satisfactory analytical quality parameters and have been validated against several certified reference materials. (Author)

  11. The funding influence on film industry

    OpenAIRE

    Wang, Yizhuo

    2013-01-01

    Danish films have gained a range of successful records in the international market, with film awards from Oscar, Cannes, and many other film festivals. Some film producers say the huge accomplishment is mainly because they have the money to do so. At same time, as a government arm length agency, the Danish Film Institute allocates subsidies for the development, production and distribution of Danish films. Does the money DFI give have an impact on the film supply and moreover the success of th...

  12. Freely floating smectic films.

    Science.gov (United States)

    May, Kathrin; Harth, Kirsten; Trittel, Torsten; Stannarius, Ralf

    2014-05-19

    We have investigated the dynamics of freely floating smectic bubbles using high-speed optical imaging. Bubbles in the size range from a few hundred micrometers to several centimeters were prepared from collapsing catenoids. They represent ideal model systems for the study of thin-film fluid dynamics under well-controlled conditions. Owing to the internal smectic layer structure, the bubbles combine features of both soap films and vesicles in their unique shape dynamics. From a strongly elongated initial shape after pinch-off, they relax towards the spherical equilibrium, first by a slow redistribution of the smectic layers, and finally by weak, damped shape oscillations. In addition, we describe the rupture of freely floating smectic bubbles, and the formation and stability of smectic filaments. PMID:24692347

  13. Reading through Films

    Directory of Open Access Journals (Sweden)

    Madhavi Gayathri Raman

    2016-02-01

    Full Text Available This paper captures the design of a comprehensive curriculum incorporating the four skills based exclusively on the use of parallel audio-visual and written texts. We discuss the use of authentic materials to teach English to Indian undergraduates aged 18 to 20 years. Specifically, we talk about the use of parallel reading (screen-play and audio-visual texts (Shawshank Redemption, and Life is Beautiful, A Few Good Men and Lion King drawn from popular culture in the classroom as an effective teaching medium. Students were gradually introduced to films based on novels with extracts from the original texts (Schindler’s List, Beautiful Mind for extended reading and writing practice. We found that students began to pay more attention to aspects such as pronunciation, intonational variations, discourse markers and vocabulary items (phrasal verbs, synonyms, homophones, and puns.Keywords: Reading, films, popular culture, ESL classroom, language skills

  14. Storyboarding an Animated Film

    DEFF Research Database (Denmark)

    Frølunde, Lisbeth

    2009-01-01

    This paper applies notions of transformation to the analysis of data on semiotic processes related to making an animated film. The data derives from a study conducted in an upper secondary school in Copenhagen with students (18 years old) participating in a week-long workshop. The paper applies t....... Conclusions highlight transformation as relevant for learning to reflect on media and the implications for teaching, given the increasing influence of visual modes of communication....... the concept of transduction with a focus on film storyboards: how students transform ideas when working with different modes (audio, visual) of representation. Data includes discourse analysis of semiotic processes and texts, referring to Social Semiotics and the methodology of Mediated Discourse Analysis...

  15. Biomimetic thin film deposition

    Energy Technology Data Exchange (ETDEWEB)

    Rieke, P.R.; Graff, G.E.; Campbell, A.A.; Bunker, B.C.; Baskaran, S.; Song, L.; Tarasevich, B.J.; Fryxell, G.E.

    1995-09-01

    Biological mineral deposition for the formation of bone, mollusk shell and other hard tissues provides materials scientists with illustrative materials processing strategies. This presentation will review the key features of biomineralization and how these features can be of technical importance. We have adapted existing knowledge of biomineralization to develop a unique method of depositing inorganic thin films and coating. Our approach to thin film deposition is to modify substrate surfaces to imitate the proteins found in nature that are responsible for controlling mineral deposition. These biomimetic surfaces control the nucleation and growth of the mineral from a supersaturated aqueous solution. This has many processing advantages including simple processing equipment, environmentally benign reagents, uniform coating of highly complex shapes, and enhanced adherence of coating. Many different types of metal oxide, hydroxide, sulfide and phosphate materials with useful mechanical, optical, electronic and biomedical properties can be deposited.

  16. Ellipsometry of anodic film growth

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.G.

    1978-08-01

    An automated computer interpretation of ellisometer measurements of anodic film growth was developed. Continuous mass and charge balances were used to utilize more fully the time dependence of the ellipsometer data and the current and potential measurements. A multiple-film model was used to characterize the growth of films which proceeds via a dissolution--precipitation mechanism; the model also applies to film growth by adsorption and nucleation mechanisms. The characteristic parameters for film growth describe homogeneous and heterogeneous crystallization rates, film porosities and degree of hydration, and the supersaturation of ionic species in the electrolyte. Additional descriptions which may be chosen are patchwise film formation, nonstoichiometry of the anodic film, and statistical variations in the size and orientation of secondary crystals. Theories were developed to describe the optical effects of these processes. An automatic, self-compensating ellipsometer was used to study the growth in alkaline solution of anodic films on silver, cadmium, and zinc. Mass-transport conditions included stagnant electrolyte and forced convection in a flow channel. Multiple films were needed to characterize the optical properties of these films. Anodic films grew from an electrolyte supersatuated in the solution-phase dissolution product. The degree of supersaturation depended on transport conditions and had a major effect on the structure of the film. Anodic reaction rates were limited by the transport of charge carriers through a primary surface layer. The primary layers on silver, zinc, and cadmium all appeared to be nonstoichiometric, containing excess metal. Diffusion coefficients, transference numbers, and the free energy of adsorption of zinc oxide were derived from ellipsometer measurements. 97 figures, 13 tables, 198 references.

  17. Thin film processes

    CERN Document Server

    Vossen, John L

    1978-01-01

    Remarkable advances have been made in recent years in the science and technology of thin film processes for deposition and etching. It is the purpose of this book to bring together tutorial reviews of selected filmdeposition and etching processes from a process viewpoint. Emphasis is placed on the practical use of the processes to provide working guidelines for their implementation, a guide to the literature, and an overview of each process.

  18. Film Ace Takes Gold

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    "Really, I never, never expected to win this," said Chinese director Jia Zhangke on hearing he had taken the top award for his movie Still Life (Sanxia Haoren) at the Venice Film Festival, on September 9. A surprise late entry, Still Life quickly emerged as the favorite and the Gold Lion was again hugged by Chinese. The well-known Chinese director Zhang Yimou won the same award back in 1999, for Not One Less-also a

  19. Darwinisme, film og filmteori

    DEFF Research Database (Denmark)

    Grodal, Torben Kragh

    2010-01-01

    Artiklen giver først en oversigt over evolutionshistorisk baseret kulturanalyse og dennes tilknytning til neuropsykologi, herunder evolutionsteoretiske studier af religion og andre overnaturlige forestillingssystemer. Derefter redegøres der kort for, hvorledes Darwinismen har  stødt på modstand, ...... kulturhistoriske baggrund for retssag og film.   Keywords: evolutionsteori, filmteori, evolutionær religionsanalyse, Inherit the wind.     Udgivelsesdato: april 2010...

  20. Interaction of hydrogenated amorphous silicon films with transparent conductive films

    OpenAIRE

    Kitagawa, M.; Mori, K; Ishihara, S.; Ohno, M.; Hirao, T.; Yoshioka, Y.; Kohiki, S

    1983-01-01

    The effects of the deposition temperature on the interaction of the hydrogenated amorphous silicon films with indium-tin-oxide and tin-oxide films have been investigated in the temperature range 150-300 degrees C, using Auger electron spectroscopy, secondary ion mass spectrometry, and scanning electron microscopy. It was found that the constituent atoms such as indium and tin are detected in the thin amorphous silicon films deposited. Around the interface between the transparent conductive fi...