WorldWideScience

Sample records for air force bases

  1. US Air Force Base Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Hourly observations taken by U.S. Air Force personnel at bases in the United States and around the world. Foreign observations concentrated in the Middle East and...

  2. Geothermal-resource verification for Air Force bases

    Energy Technology Data Exchange (ETDEWEB)

    Grant, P.R. Jr.

    1981-06-01

    This report summarizes the various types of geothermal energy reviews some legal uncertainties of the resource and then describes a methodology to evaluate geothermal resources for applications to US Air Force bases. Estimates suggest that exploration costs will be $50,000 to $300,000, which, if favorable, would lead to drilling a $500,000 exploration well. Successful identification and development of a geothermal resource could provide all base, fixed system needs with an inexpensive, renewable energy source.

  3. Eielson Air Force Base Operable Unit 2 baseline risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, R.E.; Jarvis, T.T.; Jarvis, M.R.; Whelan, G.

    1994-10-01

    Operable Unit 2 at Eielson Air Force Base (AFB) near Fairbanks, is one of several operable units characterized by petroleum, oil, and lubricant contamination, and by the presence of organic products floating at the water table, as a result of Air Force operations since the 1940s. The base is approximately 19,270 acres in size, and comprises the areas for military operations and a residential neighborhood for military dependents. Within Operable Unit 2, there are seven source areas. These source areas were grouped together primarily because of the contaminants released and hence are not necessarily in geographical proximity. Source area ST10 includes a surface water body (Hardfill Lake) next to a fuel spill area. The primary constituents of concern for human health include benzene, toluene, ethylbenzene, and xylenes (BTEX). Monitored data showed these volatile constituents to be present in groundwater wells. The data also showed an elevated level of trace metals in groundwater.

  4. Plastic media blasting activities at Hill Air Force Base

    Science.gov (United States)

    Christensen, J. D.

    1993-03-01

    Hill Air Force Base in Utah developed plastic media blasting (PMB) paint removal process for removing paint from Air Force aircraft. The development of the process involved extensive testing of various abrasives and subsequent parameters to end up with an approved production process. Hill AFB has been using PMB in a production mode since 1985, and completely discontinued chemical stripping of airframes in 1989. We have recently installed and began operating a fully automated PMB facility that utilizes two nine-axis robots to strip an aircraft. This system has enabled us to further reduce the manhours required to strip an aircraft, and also allowed us to remove the employee from the blasting atmosphere into a control room. We have, and will continue to realize, significant environmental and economic savings by using PMB. Hill is also actively involved with the development of future paint stripping technologies.

  5. Eielson Air Force Base OU-1 baseline risk assessment

    International Nuclear Information System (INIS)

    This Baseline Risk Assessment report is the second volume in a set of three volumes for operable Unit 1 (OU-1). The companion documents contain the Remedial Investigation and the Feasibility Study. Operable Unit 1 (OU-1) is one of several groups of hazardous waste sites located at Eielson Air Force Base (AFB) near Fairbanks, Alaska. The operable units at Eielson are typically characterized by petroleum, oil, lubricant/solvent contamination, and by the presence of organics floating at the water table. In 1989 and 1990, firms under contract to the Air Force conducted field studies to gather information about the extent of chemical contamination in soil, groundwater, and soil air pore space (soil gas) at the site. This report documents the results of a baseline risk assessment, which uses the 1989 and 1991 site characterization database to quantify the potential human health risk associated with past Base industrial activities in the vicinity of OU-1. Background data collected in 1992 were also used in the preparation of this report

  6. Eielson Air Force Base OU-1 baseline risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Jarvis, M.T.; Jarvis, T.T.; Van Houten, N.C.; Lewis, R.E.

    1993-09-01

    This Baseline Risk Assessment report is the second volume in a set of three volumes for operable Unit 1 (OU-1). The companion documents contain the Remedial Investigation and the Feasibility Study. Operable Unit 1 (OU-1) is one of several groups of hazardous waste sites located at Eielson Air Force Base (AFB) near Fairbanks, Alaska. The operable units at Eielson are typically characterized by petroleum, oil, lubricant/solvent contamination, and by the presence of organics floating at the water table. In 1989 and 1990, firms under contract to the Air Force conducted field studies to gather information about the extent of chemical contamination in soil, groundwater, and soil air pore space (soil gas) at the site. This report documents the results of a baseline risk assessment, which uses the 1989 and 1991 site characterization database to quantify the potential human health risk associated with past Base industrial activities in the vicinity of OU-1. Background data collected in 1992 were also used in the preparation of this report.

  7. Hazardous waste: Siting of storage facility at Kelly Air Force Base, Texas

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This report provides information on whether the hazardous waste storage facility at Kelly Air Force Base meets Resource Conservation and Recovery Act, state, and Air Force siting requirements; on whether the Air Force or the Defense Reutilization and Marketing Office selected the best site available to protect the public and to preserve good public relations with the community; on whether the Air Force, Kelly Air Force Base, or the Defense Logistics Agency adjusted siting standards as a result of the adverse publicity the hazardous waste facility has generated; and on whether Kelly Air Force Base is revising its hazardous waste management organization so that it is similar to the organizations at Tinker and McClellan Air Force Bases.

  8. Sitewide feasibility study Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Last, G.V.; Lanigan, D.C.; Josephson, G.B.; Bagaasen, L.M.

    1995-09-01

    The Sitewide Feasibility Study (FS) is required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), the National Contingency Plan (NCP), and the Federal Facility Agreement (FFA) for Eielson Air Force Base (AFB). It is based on findings presented in the Sitewide Remedial Investigation (RI) Report (USAF 1995a), and the Sitewide Baseline Risk Assessment (BLRA) Report (USAF 1995b). Under the FFA, 64 potential source areas were placed in one of six operable units, based on similar contaminant and environmental characteristics, or were included for evaluation under a Source Evaluation Report (SER). The sitewide RI was directed at contamination that was not confined to an operable unit (OU) or SER source area. The objectives of the sitewide RI were to: Provide information about site characteristics to support individual OU RI/FS efforts and the sitewide RI/FS, including site hydrogeology and determination of background soil and groundwater characteristics; identify and characterize contamination that is not confined or attributable to a specific source area through sitewide monitoring of groundwater and surface water; evaluate cumulative risks to human health and the environment from contamination on a sitewide basis; and provide a mechanism for continued cohesive sitewide monitoring.

  9. Vandenberg Air Force Base Upper Level Wind Launch Weather Constraints

    Science.gov (United States)

    Shafer, Jaclyn A.; Wheeler, Mark M.

    2012-01-01

    The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman III ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The maximum wind speed and 1000-ft shear values for each sounding in each subseason were determined. To accurately calculate the PoV, the AMU determined the theoretical distributions that best fit the maximum wind speed and maximum shear datasets. Ultimately it was discovered that the maximum wind speeds follow a Gaussian distribution while the maximum shear values follow a lognormal distribution. These results were applied when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition to the requirements outlined in the original task plan, the AMU also included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on day of launch. The interactive graphical user interface (GUI) for this project was developed in

  10. 2008 Northwest Florida Water Management District (NWFWMD) Lidar: Eglin Air Force Base, Walton County, FL

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In the summer of 2008, the Northwest Florida Water Management District collected lidar data over a portion of Walton County, FL (Eglin Air force Base) to support...

  11. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report presents information concerning field procedures employed during the monitoring, well construction, well purging, sampling, and well logging at the Wright-Patterson Air Force Base. Activities were conducted in an effort to evaluate ground water contamination.

  12. Identification of Chlorinated Solvent Sources in the Indoor Air of Private Residences around Hill Air Force Base, Utah

    OpenAIRE

    Hall, Andrew Jensen

    2008-01-01

    Volatile chlorinated solvents such as trichloroethylene (TCE), 1,2 dichloroethane (1,2 DCA), and perchloroethylene (PCE) have been identified in the indoor air of residences located near Hill Air Force Base (AFB), Utah. These vapors can originate from either volatilization of contaminates from shallow contaminated groundwater and transport into residences or from sources within the residence. The focus of the thesis was the development of a testing strategy for determining sources of TCE, 1,2...

  13. 33 CFR 334.560 - Banana River at Patrick Air Force Base, Fla.; restricted area.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Banana River at Patrick Air Force Base, Fla.; restricted area. 334.560 Section 334.560 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE DANGER ZONE AND RESTRICTED AREA REGULATIONS § 334.560...

  14. FEASIBILITY OF PRODUCING COMMODITIES AND ELECTRICITY FOR SPACE SHUTTLE OPERATIONS AT VANDENBERG AIR FORCE BASE

    Science.gov (United States)

    The report gives results of a preliminary screening study of the technical and economic feasibility of the on-site production of commodities (liquid propellant and gases) and electricity to support space shuttle launch activities at Vandenberg Air Force Base (VAFB). Both commerci...

  15. STEAM ENHANCED REMEDIATION RESEARCH FOR DNAPL IN FRACTURED ROCK, LORING AIR FORCE BASE, LIMESTONE, MAINE

    Science.gov (United States)

    This report details a research project on Steam Enhanced Remediation (SER) for the recovery of volatile organic compounds from fractured limestone that was carried out at the Quarry at the former Loring Air Force Base in Limestone, Maine. This project was carried out by USEPA, Ma...

  16. Mountain Home Air Force Base, Idaho Geothermal Resource Assessment and Future Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2013-03-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base in early 2011 near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home Air Force Base. In conclusion, Recommendation for follow-up efforts include the following:

  17. Royal Danish Air Force. Air Operations Doctrine

    DEFF Research Database (Denmark)

    Nørby, Søren

    This brief examines the development of the first Danish Air Force Air Operations Doctrine, which was officially commissioned in October 1997 and remained in effect until 2010. The development of a Danish air power doctrine was heavily influenced by the work of Colonel John Warden (USAF), both...... through his book ”The Air Campaign” and his subsequent planning of the air campaign against Iraq in 1990-1991. Warden’s ideas came to Denmark and the Danish Air Force by way of Danish Air Force students attending the United States Air Force Air University in Alabama, USA. Back in Denmark, graduates from...... the Air University inspired a small number of passionate airmen, who then wrote the Danish Air Operations Doctrine. The process was supported by the Air Force Tactical Command, which found that the work dovetailed perfectly with the transformation process that the Danish Air Force was in the midst...

  18. (Environmental investigation of ground water contamination at Wright- Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This Health and Safety Plan (HSP) was developed for the Environmental Investigation of Ground-water Contamination Investigation at Wright-Patterson Air Force Base near Dayton, Ohio, based on the projected scope of work for the Phase 1, Task 4 Field Investigation. The HSP describes hazards that may be encountered during the investigation, assesses the hazards, and indicates what type of personal protective equipment is to be used for each task performed. The HSP also addresses the medical monitoring program, decontamination procedures, air monitoring, training, site control, accident prevention, and emergency response.

  19. Measuring the Removal of Trichloroethylene from Phytoremediation Sites at Travis and Fairchild Air Force Bases

    OpenAIRE

    Klein, Heather A

    2011-01-01

    Past use of trichloroethylene (TCE) as a degreasing solvent for aircraft maintenance has resulted in widespread groundwater contamination at Air Force Bases around the world. Travis AFB in California and Fairchild AFB in Washington are evaluating phytoremediation as a treatment option, since trees have been reported to take up dissolved TCE from shallow groundwater and volatilize it to the atmosphere while enhancing the volatilization of TCE from surrounding soil. Previous studies generally...

  20. Geothermal exploration program, Hill Air Force Base, Davis and Weber Counties, Utah

    Energy Technology Data Exchange (ETDEWEB)

    Glenn, W.E.; Chapman, D.S.; Foley, D.; Capuano, R.M.; Cole, D.; Sibbett, B.; Ward, S.H.

    1980-03-01

    Results obtained from a program designed to locate a low- or moderate-temperature geothermal resource that might exist beneath Hill Air Force Base (AFB), Ogden, Utah are discussed. A phased exploration program was conducted at Hill AFB. Published geological, geochemical, and geophysical reports on the area were examined, regional exploration was conducted, and two thermal gradient holes were drilled. This program demonstrated that thermal waters are not present in the shallow subsurface at this site. (MHR)

  1. Exploration and Resource Assessment at Mountain Home Air Force Base, Idaho Using an Integrated Team Approach

    Energy Technology Data Exchange (ETDEWEB)

    Joseph C. Armstrong; Robert P. Breckenridge; Dennis L. Nielson; John W. Shervais; Thomas R. Wood

    2012-10-01

    The U.S. Air Force is facing a number of challenges as it moves into the future, one of the biggest being how to provide safe and secure energy to support base operations. A team of scientists and engineers met at Mountain Home Air Force Base near Boise, Idaho, to discuss the possibility of exploring for geothermal resources under the base. The team identified that there was a reasonable potential for geothermal resources based on data from an existing well. In addition, a regional gravity map helped identify several possible locations for drilling a new well. The team identified several possible sources of funding for this well—the most logical being to use U.S. Department of Energy funds to drill the upper half of the well and U.S. Air Force funds to drill the bottom half of the well. The well was designed as a slimhole well in accordance with State of Idaho Department of Water Resources rules and regulations. Drilling operations commenced at the Mountain Home site in July of 2011 and were completed in January of 2012. Temperatures increased gradually, especially below a depth of 2000 ft. Temperatures increased more rapidly below a depth of 5500 ft. The bottom of the well is at 5976 ft, where a temperature of about 140°C was recorded. The well flowed artesian from a depth below 5600 ft, until it was plugged off with drilling mud. Core samples were collected from the well and are being analyzed to help understand permeability at depth. Additional tests using a televiewer system will be run to evaluate orientation and directions at fractures, especially in the production zone. A final report on the well exploitation will be forthcoming later this year. The Air Force will use it to evaluate the geothermal resource potential for future private development options at Mountain Home AFB.

  2. Radar Scan Strategies for the Patrick Air Force Base Weather Surveillance Radar, Model-74C, Replacement

    Science.gov (United States)

    Short, David

    2008-01-01

    The 45th Weather Squadron (45 WS) is replacing the Weather Surveillance Radar, Model 74C (WSR-74C) at Patrick Air Force Base (PAFB), with a Doppler, dual polarization radar, the Radtec 43/250. A new scan strategy is needed for the Radtec 43/250, to provide high vertical resolution data over the Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) launch pads, while taking advantage of the new radar's advanced capabilities for detecting severe weather phenomena associated with convection within the 45 WS area of responsibility. The Applied Meteorology Unit (AMU) developed several scan strategies customized for the operational needs of the 45 WS. The AMU also developed a plan for evaluating the scan strategies in the period prior to operational acceptance, currently scheduled for November 2008.

  3. Potentiometric surfaces of the Arnold Engineering Development Complex Area, Arnold Air Force Base, Tennessee, May and September 2011

    Science.gov (United States)

    Haugh, Connor J.; Robinson, John A.

    2016-01-29

    Arnold Air Force Base occupies about 40,000 acres in Coffee and Franklin Counties, Tennessee. The primary mission of Arnold Air Force Base is to provide risk-reduction information in the development of aerospace products through test and evaluation. This mission is achieved in part through test facilities at Arnold Engineering Development Complex (AEDC), which occupies about 4,000 acres in the center of Arnold Air Force Base. Arnold Air Force Base is underlain by gravel and limestone aquifers, the most productive of which is the Manchester aquifer. Several volatile organic compounds, primarily chlorinated solvents, have been identified in the groundwater at Arnold Air Force Base. In 2011, the U.S. Geological Survey, in cooperation with the U.S. Air Force, Arnold Air Force Base, completed a study of groundwater flow focused on the Arnold Engineering Development Complex area. The Arnold Engineering Development Complex area is of particular concern because within this area (1) chlorinated solvents have been identified in the groundwater, (2) the aquifers are dewatered around below-grade test facilities, and (3) there is a regional groundwater divide.

  4. Fall 1994 wildlife and vegetation survey, Norton Air Force Base, California

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-15

    The fall 1994 wildlife and vegetation surveys were completed October 3-7, 1994, at Norton Air Force Base (AFB), California. Two biologists from CDM Federal Programs, the U.S. Environmental Protection Agency (EPA) regional biologist and the Oak Ridge National Laboratory (ORNL) lead biologist conducted the surveys. A habitat assessment of three Installation Restoration Project (IRP) sites at Norton Air Force Base was also completed during the fall survey period. The IRP sites include: Landfill No. 2 (Site 2); the Industrial Wastewater Treatment Plant (IWTP) area; and Former Fire Training Area No. 1 (Site 5). The assessments were designed to qualitatively characterize the sites of concern, identify potential ecological receptors, and provide information for Remedial Design/Remedial Action activities. A Reference Area (Santa Ana River Wash) and the base urban areas were also characterized. The reference area assessment was performed to provide a baseline for comparison with the IRP site habitats. The fall 1994 survey is the second of up to four surveys that may be completed. In order to develop a complete understanding of all plant and animal species using the base, these surveys were planned to be conducted over four seasons. Species composition can vary widely during the course of a year in Southern California, and therefore, seasonal surveys will provide the most complete and reliable data to address changes in habitat structure and wildlife use of the site. Subsequent surveys will focus on seasonal wildlife observations and a spring vegetation survey.

  5. Groundwater level and nitrate concentration trends on Mountain Home Air Force Base, southwestern Idaho

    Science.gov (United States)

    Williams, Marshall L.

    2014-01-01

    Mountain Home Air Force Base in southwestern Idaho draws most of its drinking water from the regional aquifer. The base is located within the State of Idaho's Mountain Home Groundwater Management Area and is adjacent to the State's Cinder Cone Butte Critical Groundwater Area. Both areas were established by the Idaho Department of Water Resources in the early 1980s because of declining water levels in the regional aquifer. The base also is listed by the Idaho Department of Environmental Quality as a nitrate priority area. The U.S. Geological Survey, in cooperation with the U.S. Air Force, began monitoring wells on the base in 1985, and currently monitors 25 wells for water levels and 17 wells for water quality, primarily nutrients. This report provides a summary of water-level and nitrate concentration data collected primarily between 2001 and 2013 and examines trends in those data. A Regional Kendall Test was run to combine results from all wells to determine an overall regional trend in water level. Groundwater levels declined at an average rate of about 1.08 feet per year. Nitrate concentration trends show that 3 wells (18 percent) are increasing in nitrate concentration trend, 3 wells (18 percent) show a decreasing nitrate concentration trend, and 11 wells (64 percent) show no nitrate concentration trend. Six wells (35 percent) currently exceed the U.S. Environmental Protection Agency's maximum contaminant limit of 10 milligrams per liter for nitrate (nitrite plus nitrate, measured as nitrogen).

  6. American Recovery and Reinvestment Act (ARRA) Federal Energy Management Program Technical Assistance Project 224 Altus Air Force Base Solar Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Bryan J.

    2010-09-30

    The principal goal of this project was to evaluate altus Air Force Base for building integrated silicon or thin film module photovoltaic opportunities. This report documents PNNL's efforts and documents study conclusions.

  7. Operable Unit 1 remedial investigation report, Eielson Air Force Base, Alaska

    International Nuclear Information System (INIS)

    This remedial investigation report for operable Unit 1 (OU-1) at Eielson Air Force Base presents data, calculations, and conclusions as to the nature and extent of surface and subsurface contamination at the eight source areas that make up OU-1. The information is based on the 1993 field investigation result and previous investigations. This report is the first in a set of three for OU-1. The other reports are the baseline risk assessment and feasibility study. The information in these reports will lead to a Record of Decision that will guide and conclude the environmental restoration effort for OU-1 at Eielson Air Force Base. The primary contaminants of concern include fuels and fuel-related contaminants (diesel; benzene, toluene, ethylbenzene, and xylene; total petroleum hydrocarbon; polycyclic aromatic hydrocarbons), maintenance-related solvents and cleaners (volatile chlorinated hydrocarbons such as trichloroothylene), polychlorinated biphenyls, and dichlorodiphenyltrichloroethane (DDT). The origins of contaminants of concern include leaks from storage tanks, drums and piping, and spills. Ongoing operations and past sitewide practices also contribute to contaminants of concern at OU-1 source areas. These include spraying mixed oil and solvent wastes on unpaved roads and aerial spraying of DDT

  8. Operable Unit 1 remedial investigation report, Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Gilmore, T.J.; Fruland, R.M.; Liikala, T.L. [and others

    1994-06-01

    This remedial investigation report for operable Unit 1 (OU-1) at Eielson Air Force Base presents data, calculations, and conclusions as to the nature and extent of surface and subsurface contamination at the eight source areas that make up OU-1. The information is based on the 1993 field investigation result and previous investigations. This report is the first in a set of three for OU-1. The other reports are the baseline risk assessment and feasibility study. The information in these reports will lead to a Record of Decision that will guide and conclude the environmental restoration effort for OU-1 at Eielson Air Force Base. The primary contaminants of concern include fuels and fuel-related contaminants (diesel; benzene, toluene, ethylbenzene, and xylene; total petroleum hydrocarbon; polycyclic aromatic hydrocarbons), maintenance-related solvents and cleaners (volatile chlorinated hydrocarbons such as trichloroothylene), polychlorinated biphenyls, and dichlorodiphenyltrichloroethane (DDT). The origins of contaminants of concern include leaks from storage tanks, drums and piping, and spills. Ongoing operations and past sitewide practices also contribute to contaminants of concern at OU-1 source areas. These include spraying mixed oil and solvent wastes on unpaved roads and aerial spraying of DDT.

  9. Demonstration of Security Benefits of Renewable Generation at FE Warren Air Force Base

    International Nuclear Information System (INIS)

    Report detailing field demonstration of security benefits of renewable generation at FE Warren Air Force Base. The 2006 National Defense Appropriations Act directed the Department of Defense (DOD) to coordinate the testing of a wind turbine (new to the U.S. market) at an Air Force installation as a follow on to analyses conducted by the Pacific Northwest National Laborabory (PNNL) as part of the 2005 DOD Renewable Assessment. The earlier study simulated the performance of renewable power produced from wind turbines, solar photovoltaics and geothermal energy as part of a Base-wide energy security solution. The simulation concluded that integration of renewable generating resources with emergency generators, typically diesel-fired, could significantly enhance energy security and extend power supplies during prolonged commercial grid power outages. A simulation is insufficient to convince skeptics of the reliability of renewable resources, especially those that produce power only intermittently, like wind and solar. Therefore, Congress requested a field demonstration be performed using a wind turbine because wind power is the most erratic of all renewable resources. Following this direction, the Air Force identified a site for the wind turbine demonstration and contracted with the Idaho National Laboratory (INL) and PNNL to conduct the demonstration and implement other provisions in the appropriation bill. INL identified a wind turbine that met the legislative requirements (the Gamesa G-80), and with the support of PNNL and the Air Force, selected FE Warren Air Force Base for the demonstration. FE Warren has an excellent wind resource and was already a host to two wind turbines and could accommodate a third. The G-80 is rated at 2 MWs versus the two existing 660 kW turbines, consequently wind production would more than double. Procurement, siting, and acceptance testing of the new turbine was completed in early 2010. The field test was conducted in late April 2010

  10. Source evaluation report phase 2 investigation: Limited field investigation. Final report: United States Air Force Environmental Restoration Program, Eielson Air Force Base, Alaska

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    This report describes the limited field investigation work done to address issues and answer unresolved questions regarding a collection of potential contaminant sources at Eielson Air Force Base (AFB), near Fairbanks, Alaska. These sources were listed in the Eielson AFB Federal Facility Agreement supporting the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) cleanup of the base. The limited field investigation began in 1993 to resolve all remaining technical issues and provide the data and analysis required to evaluate the environmental hazard associated with these sites. The objective of the limited field investigation was to allow the remedial project managers to sort each site into one of three categories: requiring remedial investigation/feasibility study, requiring interim removal action, or requiring no further remedial action.

  11. Robins Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, G.P.; Keller, J.M.; Stucky, D.J.; Wahlstrom, R.R.; Larson, L.L.

    1993-10-01

    The US Air Force Materiel Command (AFMC) has tasked the US Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory (PNL), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Robins Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the AFMC Robins AFB facility located approximately 15 miles south of Macon, Georgia. It is a companion report to Volume 1, Executive Summary, and Volume 2, Baseline Detail. The results of the analyses of EROs are presented in 13 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative-description of each ERO is provided, including information on the installed cost, energy and dollar savings; impacts on operation and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present value (NPV) and savings to investment ratio (SIR) of each ERO.

  12. Patrick Air Force Base integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sandusky, W.F.; Parker, S.A.; King, D.A.; Wahlstrom, R.R.; Elliott, D.B.; Shankle, S.A.

    1993-12-01

    The US Air Force has tasked the Pacific Northwest Laboratory (PNL) in support of the US Department of Energy Federal Energy Management Program to identify, evaluate, and assist in acquiring all cost effective energy projects at Patrick Air Force Base (AFB). This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at Patrick AFB which is located south of Cocoa Beach, Florida. It is a companion report to Volume 1, Executive Summary, and Volume.2, Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories. A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings, impacts on operations and maintenance, and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost analysis indicating the net present value and value index of each ERO.

  13. Eielson Air Force Base operable unit 2 and other areas record of decision

    International Nuclear Information System (INIS)

    This decision document presents the selected remedial actions and no action decisions for Operable Unit 2 (OU2) at Eielson Air Force Base (AFB), Alaska, chosen in accordance with state and federal regulations. This document also presents the decision that no further action is required for 21 other source areas at Eielson AFB. This decision is based on the administrative record file for this site. OU2 addresses sites contaminated by leaks and spills of fuels. Soils contaminated with petroleum products occur at or near the source of contamination. Contaminated subsurface soil and groundwater occur in plumes on the top of a shallow groundwater table that fluctuates seasonally. These sites pose a risk to human health and the environment because of ingestion, inhalation, and dermal contact with contaminated groundwater. The purpose of this response is to prevent current or future exposure to the contaminated groundwater, to reduce further contaminant migration into the groundwater, and to remediate groundwater

  14. 1995 Area 1 bird survey/Zone 1, Operable Unit 2, Robins Air Force Base, Georgia

    Energy Technology Data Exchange (ETDEWEB)

    Wade, M.C.

    1995-08-01

    Robins Air Force Base is located in Warner Robins, Georgia, approximately 90 miles southeast of Atlanta, Georgia. As part of the Baseline Investigation (CDM Federal 1994) a two day bird survey was conducted by M. C. Wade (Oak Ridge National Laboratory) and B.A. Beatty (CDM Federal Programs) in May 1995. The subject area of investigation includes the sludge lagoon, Landfill No. 4, and the wetland area east of the landfill and west of Hannah Road (including two ponds). This is known as Area 1. The Area 1 wetlands include bottomland hardwood forest, stream, and pond habitats. The objectives of this survey were to document bird species using the Area I wetlands and to see if the change in hydrology (due to the installation of the Sewage Treatment Plant effluent diversion and stormwater runon control systems) has resulted in changes at Area 1 since the previous survey of May 1992 (CDM Federal 1994).

  15. Improving environmental noise suppression for micronewton force sensing based on electrostatic by injecting air damping.

    Science.gov (United States)

    Zheng, Yelong; Song, Le; Hu, Gang; Zhao, Meirong; Tian, Yanling; Zhang, Zihui; Fang, Fengzhou

    2014-05-01

    A micro/nano force can be traced to the International System of Units by means of an electrostatic force balance weight system. However, the micro/nano force measurement system is susceptible to environmental disturbances. Various methods have been proposed to reduce the effect of environmental disturbances and obtain high resolution and fast response. In this paper, we introduce a combination of air damping and inherent damping from the internal molecular friction of spring suspension. This will optimize system stability and improve environmental noise suppression. Results from the air damping model show that the damping ratio increases from 0.0005 to 0.1, which improves the vibration resistance. We found that the system with air damping has the advantages of fast response and low scatter. PMID:24880403

  16. Gunship Diplomacy : carrier based close air support for joint expeditionary forces

    OpenAIRE

    Emanuel, Taylor C.

    1994-01-01

    This study examines whether current and future strategy, doctrine, and programmed systems are suitable to perform fire support and specifically, close air support (CAS)and close air support/troops-in-contact (CAS/TIC) missions for joint expeditionary warfare. Naval forces will provide the "enabling" power for this new come-as-you-are environment. To offset reductions in organic fire support, more frequent and sustained application of CAS and CAS/TIC will be required by joint expeditionary f...

  17. Vandenberg Air Force Base integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Halverson, M.A.; Richman, E.E.; Dagle, J.E.; Hickman, B.J.; Daellenbach, K.K.; Sullivan, G.P.

    1993-06-01

    The US Air Force Space Command has tasked the Pacific Northwest Laboratory, as the lead laboratory supporting the US Department of Energy Federal Energy Management Program, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Vandenberg Air Force Base (VAFB). This is a model program PNL is designing for federal customers served by the Pacific Gas and Electric Company (PG and E). The primary goal of the VAFB project is to identify all electric energy efficiency opportunities, and to negotiate with PG and E to acquire those resources through a customized demand-side management program for its federal clients. That customized program should have three major characteristics: (1) 100% up-front financing; (2) substantial utility cost-sharing; and (3) utility implementation through energy service companies under contract to the utility. A similar arrangement will be pursued with Southern California Gas for non-electric resource opportunities if that is deemed desirable by the site and if the gas utility seems open to such an approach. This report documents the assessment of baseline energy use at VAFB located near Lompoc, California. It is a companion report to Volume 1, Executive Summary, and Volume 3, Resource Assessment. This analysis examines the characteristics of electric, natural gas, fuel oil, and propane use for fiscal year 1991. It records energy-use intensities for the facilities at VAFB by building type and energy end use. It also breaks down building energy consumption by fuel type, energy end use, and building type. A more complete energy consumption reconciliation is presented that includes the accounting of all energy use among buildings, utilities, and applicable losses.

  18. Soil erosion and causative factors at Vandenberg Air Force Base, California

    Science.gov (United States)

    Butterworth, Joel B.

    1988-01-01

    Areas of significant soil erosion and unvegetated road cuts were identified and mapped for Vandenberg Air Force Base. One hundred forty-two eroded areas (most greater than 1.2 ha) and 51 road cuts were identified from recent color infrared aerial photography and ground truthed to determine the severity and causes of erosion. Comparison of the present eroded condition of soils (as shown in the 1986 photography) with that in historical aerial photography indicates that most erosion on the base took place prior to 1928. However, at several sites accelerated rates of erosion and sedimentation may be occurring as soils and parent materials are eroded vertically. The most conspicuous erosion is in the northern part of the base, where severe gully, sheet, and mass movement erosion have occurred in soils and in various sedimentary rocks. Past cultivation practices, compounded by highly erodible soils prone to subsurface piping, are probably the main causes. Improper range management practices following cultivation may have also increased runoff and erosion. Aerial photography from 1986 shows that no appreciable headward erosion or gully sidewall collapse have occurred in this area since 1928.

  19. Air Force neutron dosimetry program

    International Nuclear Information System (INIS)

    Approximately 1000 Air Force personnel are monitored for neutron radiation resulting from various sources at more than thirty worldwide locations. Neutron radiation spanning several orders of magnitude in energy is encountered. The Air Force currently uses albedo thermoluminescent neutron dosimeters for personnel monitoring. The energy dependence of the albedo neutron dosimeter is a current problem and the development of site specific correction factors is ongoing. A summary of data on the energy dependence is presented as well as efforts to develop algorithms for the dosimeter. An overview of current Air Force neutron dosimetry users and needs is also presented

  20. Remediation of the low-level radioactive waste burial site at Williams Air Force Base

    International Nuclear Information System (INIS)

    The Air Force initiated a contract to develop and prepare detailed work plans for the removal of five concrete cylinders and associated field activities at site RW-11 at Williams AFB. Cylinders were believed to contain low-level radioactive waste including radium-luminous painted dials and radium-bearing parts. Although the general location of the cylinders was known, the exact configuration and contents of the cylinders was unknown. Plans included site preparation, excavation, monitoring, packaging, disposal, closure, and health and safety. The Health and Safety Plan was developed based on the premise that Radium 226 was the primary isotope of concern. The primary health hazard for workers and the public associated with site excavation was inhalation of airborne radioactive dust. Contingency plans were prepared in the event any radiation activity was detected above background levels or other radioactive isotopes were detected at the site. Criteria used to determine whether the site posed a threat to human health or the environment was based on an action level of 10 millirem Total Effective Dose Equivalent. Williams AFB is a closed installation that was placed on the Superfund National Priorities List. This paper discusses the plans what were developed to remove the buried waste, the execution of the plans, and closure of the site RW-11

  1. Statistical Short-Range Guidance for Peak Wind Speed Forecasts at Edwards Air Force Base, CA

    Science.gov (United States)

    Dreher, Joseph G.; Crawford, Winifred; Lafosse, Richard; Hoeth, Brian; Burns, Kerry

    2009-01-01

    The peak winds near the surface are an important forecast element for space shuttle landings. As defined in the Flight Rules (FR), there are peak wind thresholds that cannot be exceeded in order to ensure the safety of the shuttle during landing operations. The National Weather Service Spaceflight Meteorology Group (SMG) is responsible for weather forecasts for all shuttle landings, and is required to issue surface average and 10-minute peak wind speed forecasts. They indicate peak winds are a challenging parameter to forecast. To alleviate the difficulty in making such wind forecasts, the Applied Meteorology Unit (AMU) developed a PC-based graphical user interface (GUI) for displaying peak wind climatology and probabilities of exceeding peak wind thresholds for the Shuttle Landing Facility (SLF) at Kennedy Space Center (KSC; Lambert 2003). However, the shuttle occasionally may land at Edwards Air Force Base (EAFB) in southern California when weather conditions at KSC in Florida are not acceptable, so SMG forecasters requested a similar tool be developed for EAFB.

  2. US Air Force Balloon Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Worksheets containing pilot balloon data computed from releases at Air Force stations in the western United States. Elevation and azimuth angles are used to compute...

  3. A method for calculation of forces acting on air cooled gas turbine blades based on the aerodynamic theory

    Directory of Open Access Journals (Sweden)

    Grković Vojin R.

    2013-01-01

    Full Text Available The paper presents the mathematical model and the procedure for calculation of the resultant force acting on the air cooled gas turbine blade(s based on the aerodynamic theory and computation of the circulation around the blade profile. In the conducted analysis was examined the influence of the cooling air mass flow expressed through the cooling air flow parameter λc, as well as, the values of the inlet and outlet angles β1 and β2, on the magnitude of the tangential and axial forces. The procedure and analysis were exemplified by the calculation of the tangential and axial forces magnitudes. [Projekat Ministarstva nauke Republike Srbije: Development and building the demonstrative facility for combined heat and power with gasification

  4. Geophysical characterization of fractured bedrock at Site 8, former Pease Air Force Base, Newington, New Hampshire

    Science.gov (United States)

    Mack, Thomas J.; Degnan, James R.

    2003-01-01

    Borehole-geophysical logs collected from eight wells and direct-current resistivity data from three survey lines were analyzed to characterize the fractured bedrock and identify transmissive fractures beneath the former Pease Air Force Base, Newington, N.H. The following logs were used: caliper, fluid temperature and conductivity, natural gamma radiation, electromagnetic conductivity, optical and acoustic televiewer, and heat-pulse flowmeter. The logs indicate several foliation and fracture trends in the bedrock. Two fracture-correlated lineaments trending 28? and 29?, identified with low-altitude aerial photography, are coincident with the dominant structural trend. The eight boreholes logged at Site 8 generally have few fractures and have yields ranging from 0 to 40 gallons per minute. The fractures that probably resulted in high well yields (20?40 gallons per minute) strike northeast-southwest or by the right hand rule, have an orientation of 215?, 47?, and 51?. Two-dimensional direct-current resistivity methods were used to collect detailed subsurface information about the overburden, bedrock-fracture zone depths, and apparent-dip directions. Analysis of data inversions from data collected with dipole-dipole and Schlumberger arrays indicated electrically conductive zones in the bedrock that are probably caused by fractured rock. These zones are coincident with extensions of fracture-correlated lineaments. The fracture-correlated lineaments and geophysical-survey results indicate a possible northeast-southwest anisotropy to the fractured rock.

  5. [Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio

    International Nuclear Information System (INIS)

    This Removal Action System Design has been prepared as a Phase I Volume for the implementation of the Phase II removal action at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio. The objective of the removal action is to prevent, to the extent practicable, the migration of ground water contaminated with chlorinated volatile organic compounds (VOCS) across the southwest boundary of Area C. The Phase 1, Volume 9 Removal Action System Design compiles the design documents prepared for the Phase II Removal Action. These documents, which are presented in Appendices to Volume 9, include: Process Design, which presents the 30 percent design for the ground water treatment system (GWTS); Design Packages 1 and 2 for Earthwork and Road Construction, and the Discharge Pipeline, respectively; no drawings are included in the appendix; Design Package 3 for installation of the Ground Water Extraction Well(s); Design Package 4 for installation of the Monitoring Well Instrumentation; and Design Package 5 for installation of the Ground Water Treatment System; this Design Package is incorporated by reference because of its size

  6. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    This Removal Action System Design has been prepared as a Phase I Volume for the implementation of the Phase II removal action at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio. The objective of the removal action is to prevent, to the extent practicable, the migration of ground water contaminated with chlorinated volatile organic compounds (VOCS) across the southwest boundary of Area C. The Phase 1, Volume 9 Removal Action System Design compiles the design documents prepared for the Phase II Removal Action. These documents, which are presented in Appendices to Volume 9, include: Process Design, which presents the 30 percent design for the ground water treatment system (GWTS); Design Packages 1 and 2 for Earthwork and Road Construction, and the Discharge Pipeline, respectively; no drawings are included in the appendix; Design Package 3 for installation of the Ground Water Extraction Well(s); Design Package 4 for installation of the Monitoring Well Instrumentation; and Design Package 5 for installation of the Ground Water Treatment System; this Design Package is incorporated by reference because of its size.

  7. (Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio)

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Bill

    1991-10-01

    In April 1990, Wright-Patterson Air Force Base (WPAFB), initiated an investigation to evaluate a potential Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) removal action to prevent, to the extent practicable, the offsite migration of contaminated ground water from WPAFB. WPAFB retained the services of the Environmental Management Operations (EMO) and its principle subcontractor, International Technology Corporation (IT) to complete Phase 1 of the environmental investigation of ground-water contamination at WPAFB. Phase 1 of the investigation involves the short-term evaluation and potential design for a program to remove ground-water contamination that appears to be migrating across the western boundary of Area C, and across the northern boundary of Area B along Springfield Pike. Primarily, Task 4 of Phase 1 focuses on collection of information at the Area C and Springfield Pike boundaries of WPAFB. This Sampling and Analysis Plan (SAP) has been prepared to assist in completion of the Task 4 field investigation and is comprised of the Quality Assurance Project Plan (QAPP) and the Field Sampling Plan (FSP).

  8. Effects of contaminants on reproductive success of aquatic birds nesting at Edwards Air Force Base, California

    Science.gov (United States)

    Hothem, R.L.; Crayon, J.J.; Law, M.A.

    2006-01-01

    Contamination by organochlorine pesticides (OCs), polychlorinated biphenyls, metals, and trace elements at Edwards Air Force Base (EAFB), located in the Mojave Desert, could adversely affect nesting aquatic birds, especially at the sewage lagoons that comprise Piute Ponds. Estimates of avian reproduction, in conjunction with analyses of eggs and avian foods for contaminant residues, may indicate the potential for negative effects on avian populations. From 1996 to 1999, we conducted studies at the Piute Ponds area of EAFB to evaluate the impacts of contaminants on nesting birds. Avian reproduction was evaluated in 1999. Eggs were collected for chemical analyses in 1996 and 1999, and African clawed frogs (Xenopus laevis), a likely food source, were collected for chemical analyses in 1998. Avian species occupying the higher trophic levels-black-crowned night-heron (Nycticorax nycticorax), white-faced ibis (Plegadis chihi), and American avocet (Recurvirostra americana)-generally bioaccumulated higher concentrations of contaminants in their eggs. Reproductive success and egg hatchability of night-herons and white-faced ibises in the Piute Ponds were similar to results observed at other western colonies. Deformities were observed in only one embryo in this study, but concentrations of contaminants evaluated in this ibis embryo were considered insufficient to have caused the deformities. Because clawed frogs, a primary prey item for night-herons at Piute Ponds, had no detectable levels of any OCs, it is likely that OCs found in night-heron eggs were acquired from the wintering grounds rather than from EAFB. The presence of isomers of dichlorodiphenyltrichloroethane (DDT) in ibis eggs indicated recent exposure, but invertebrates used for food by ibises were not sampled at Piute Ponds, and conclusions about the source of OCs in ibis eggs could not be made. Concentrations of contaminants in random and failed eggs of individual species were not different, and we concluded

  9. Geologic investigation :an update of subsurface geology on Kirtland Air Force Base, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    Van Hart, Dirk (GRAM, Inc.)

    2003-06-01

    The objective of this investigation was to generate a revised geologic model of Kirtland Air Force Base (KAFB) incorporating the geological and geophysical data produced since the Site-Wide Hydrogeologic Characterization Project (SWHC) of 1994 and 1995. Although this report has certain stand-alone characteristics, it is intended to complement the previous work and to serve as a status report as of late 2002. In the eastern portion of KAFB (Lurance Canyon and the Hubbell bench), of primary interest is the elevation to which bedrock is buried under a thin cap of alluvium. Elevation maps of the bedrock top reveal the paleodrainage that allows for the interpretation of the area's erosional history. The western portion of KAFB consists of the eastern part of the Albuquerque basin where bedrock is deeply buried under Santa Fe Group alluvium. In this area, the configuration of the down-to-the-west, basin-bounding Sandia and West Sandia faults is of primary interest. New geological and geophysical data and the reinterpretation of old data help to redefine the location and magnitude of these elements. Additional interests in this area are the internal stratigraphy and structure of the Santa Fe Group. Recent data collected from new monitoring wells in the area have led to a geologic characterization of the perched Tijeras Arroyo Groundwater system and have refined the known limits of the Ancestral Rio Grande fluvial sediments within the Santa Fe Group. Both the reinterpretation of the existing data and a review of the regional geology have shown that a segment of the boundary between the eastern and western portions of KAFB is a complicated early Tertiary (Laramide) wrench-fault system, the Tijeras/Explosive Ordnance Disposal Area/Hubbell Spring system. A portion of this fault zone is occupied by a coeval ''pull-apart'' basin filled with early Tertiary conglomerates, whose exposures form the ''Travertine Hills''.

  10. An overview of the Noncyanide Metal Stripper program conducted at Kelly Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    Argyle, M.D.; Cowan, R.L.

    1995-01-01

    The Noncyanide Metal Stripper Program was a waste minimization effort aimed at identifying and testing suitable noncyanide stripping solutions that could replace the cyanide stripping solutions found in the United States Air Force (USAF) Air Logistics Centers (ALC). The program started with laboratory testing of commercial stripping solutions. The performance of these solutions was compared with the cyanide process solutions C-101 and C-106 targeted for replacement. Plate metal stripping rate, basis metal corrosion, and compatibility with masking materials and biodegradability were all used to determine the performance of each product. Those products that passed the acceptance criteria were field tested using 25 to 50-gallon solutions to determine optimum operating conditions, stripper maintenance requirements, and maximum solution loading and longevity. The program included investigating any adverse effects these new products might have on existing chemical and biological waste treatment processes. All cyanide stripping solutions at the San Antonio Air Logistics Command Center have been successfully replaced with commercial noncyanide products. Generally, these replacements were less toxic and generated less waste and had longer lifetimes than their cyanide counterparts.

  11. Outbreak of acute gastroenteritis in an air force base in Western Greece

    Directory of Open Access Journals (Sweden)

    Kolokotronis Theodoros

    2006-10-01

    Full Text Available Abstract Background On the 20th September 2005, soldiers and staff at the Air Force base in Western Greece experienced an outbreak of acute gastroenteritis. The purpose of this study was to identify the agent and the source of the outbreak in order to develop control measures and to avoid similar outbreaks in the future. Methods A case-control analytical approach was employed with 100 randomly selected cases and 66 controls. Patients completed standardized questionnaires, odds ratios were calculated and statistical significance was determined using χ2 test. In addition, to identify the source of the infection, we performed bacteriological examination of food samples (included raw beef, cooked minced meat, grated cheese and grated cheese in sealed package collected from the cuisine of the military unit. Results More than 600 out of the 1,050 individuals who ate lunch that day, became ill. The overall attack rate, as the military doctor of the unit estimated it, was at least 60%. The overall odds ratio of gastroenteritis among those who had lunch was 370 (95% CI: 48–7700 as compared to those who didn't eat lunch. Among the symptoms the most prominent were watery diarrhoea (96% and abdominal pain (73%. The mean incubation period was 9 h and the median duration of the symptoms was 21 h. In the bacteriological examination, Staphylococcus aureus was detected in a sample of raw beef (2,000 cfu per g and in two samples of grated cheese; leftover cheese from lunch (7,800 cfu per g and an unopened package purchased from the market (3,000 cfu per g. Conclusion The findings of this study suggest that the aetiological agent of this outbreak was S. aureus. The food vehicle was the grated cheese, which was mixed with the beef and served for lunch in the military unit. This outbreak highlights the capacity of enterotoxin-producing bacteria to cause short term, moderately-severe illness in a young and healthy population. It underscores the need for proper

  12. Threatened and Endangered Species Survey for Patrick Air Force Base, Florida

    Science.gov (United States)

    Oddy, Donna M.; Stolen, Eric D.; Schmalzer, Paul A.; Larson, Vickie L.; Hall, Patrice; Hensley, Melissa A.

    1997-01-01

    A review of previous environmental work conducted at Patrick Air Force Base (PAFB) indicated that several threatened, endangered, or species of special concern occurred or had the potential to occur there. This study was implemented to collect more information on protected species at PAFB. A map of landcover types was prepared for PAFB using aerial photography, groundtruthing, and a geographic information system (GIS). Herbaceous vegetation was the most common vegetation type. The second most abundant vegetation type was disturbed shrubs/exotics. The beach and associated dune vegetation comprised 3.2% of the land area, but was the most extensive natural community within PAFB. A few isolated mangrove communities exist along the Banana River. Seventy-seven species of vascular plants occurred on the dunes, including four species listed by state agencies: spider lily (Hymenocallis latifolia), prickly pear cactus (Opuntia stricta), beach star (Remirea maritima), and inkberry (Scaevola plumien). Surveys of other habitats revealed eighty-four species of vascular plants including two state-listed species: spider lily and prickly pear cactus. Many of these areas are dominated by invasive, exotic species, particularly Brazilian pepper (Schinus terebinthifolius) and Australian pine (Casuarina equisetifolia), and native species of open or disturbed sites such as camphorweed (Heterotheca subaxillaris) and beardgrass (Andropogon spp.). Due to the isolation of PAFB from other natural areas, most exotic plant populations on the base are not an immediate threat to intact native plant communities. Dune habitat was surveyed for the southeastem beach mouse (Peromyscus polionotus niveiventris) by quarterly trapping along eight 100 m transects. No beach mice were found. The limited extent of dune habitat, its fragmented condition, and the isolation of PAFB from extant populations of the beach mouse probably accounts for its absence. Surveys of birds on PAFB found an avifauna

  13. Technical and economic assessment for asbestos abatement within Facility 20470, Wright-Patterson Air Force Base, Ohio

    International Nuclear Information System (INIS)

    This report presents the results of a technical and economic assessment of available alternatives for asbestos abatement within Facility 20470 at the Wright-Patterson Air Force Base in Dayton, Ohio. Each alternative was screened on the basis of technical feasibility, environmental impact, economics, and fulfillment of the IRP goals. Four alternatives for study are: establishing a special operations and maintenance program; enclosure; encapsulation with sealants; and removal, disposal, and replacement. Each of these alternatives was assessed for capability to control the release of asbestos fibers within Facility 20470. Alternatives 1 and 4 were determined to be acceptable, while Alternatives 2 and 3 were found to be unacceptable. 2 refs., 6 figs

  14. Simulation Based Low-Cost Composite Process Development at the US Air Force Research Laboratory

    Science.gov (United States)

    Rice, Brian P.; Lee, C. William; Curliss, David B.

    2003-01-01

    Low-cost composite research in the US Air Force Research Laboratory, Materials and Manufacturing Directorate, Organic Matrix Composites Branch has focused on the theme of affordable performance. Practically, this means that we use a very broad view when considering the affordability of composites. Factors such as material costs, labor costs, recurring and nonrecurring manufacturing costs are balanced against performance to arrive at the relative affordability vs. performance measure of merit. The research efforts discussed here are two projects focused on affordable processing of composites. The first topic is the use of a neural network scheme to model cure reaction kinetics, then utilize the kinetics coupled with simple heat transport models to predict, in real-time, future exotherms and control them. The neural network scheme is demonstrated to be very robust and a much more efficient method that mechanistic cure modeling approach. This enables very practical low-cost processing of thick composite parts. The second project is liquid composite molding (LCM) process simulation. LCM processing of large 3D integrated composite parts has been demonstrated to be a very cost effective way to produce large integrated aerospace components specific examples of LCM processes are resin transfer molding (RTM), vacuum assisted resin transfer molding (VARTM), and other similar approaches. LCM process simulation is a critical part of developing an LCM process approach. Flow simulation enables the development of the most robust approach to introducing resin into complex preforms. Furthermore, LCM simulation can be used in conjunction with flow front sensors to control the LCM process in real-time to account for preform or resin variability.

  15. Quantifying the Removal of Trichloroethylene via Phytoremediation a Hill Air Force Base, Utah Operational Unit 2 Using Recent and Historical Data

    OpenAIRE

    Diamond, J. Oliver

    2016-01-01

    Trichloroethylene (TCE) is a carcinogenic, chlorinated volatile organic compound that was commonly used as a degreasing solvent for aircraft maintenance at many US Air Force bases. Past improper disposal of TCE has resulted in contaminated groundwater at many of these facilities. Phytoremediation, defined as the use of plants and their associated microorganisms to stabilize or remove contamination, has been implemented as part of a TCE groundwater cleanup at Travis Air Force base near Sacrame...

  16. Hydrogeology, simulated ground-water flow, and ground-water quality, Wright-Patterson Air Force Base, Ohio

    Science.gov (United States)

    Dumouchelle, D.H.; Schalk, C.W.; Rowe, G.L.; De Roche, J.T.

    1993-01-01

    Ground water is the primary source of water in the Wright-Patterson Air Force Base area. The aquifer consists of glacial sands and gravels that fill a buried bedrock-valley system. Consolidated rocks in the area consist of poorly permeable Ordovician shale of the Richmondian stage, in the upland areas, the Brassfield Limestone of Silurian age. The valleys are filled with glacial sediments of Wisconsinan age consisting of clay-rich tills and coarse-grained outwash deposits. Estimates of hydraulic conductivity of the shales based on results of displacement/recovery tests range from 0.0016 to 12 feet per day; estimates for the glacial sediments range from less than 1 foot per day to more than 1,000 feet per day. Ground water flow from the uplands towards the valleys and the major rivers in the region, the Great Miami and the Mad Rivers. Hydraulic-head data indicate that ground water flows between the bedrock and unconsolidated deposits. Data from a gain/loss study of the Mad River System and hydrographs from nearby wells reveal that the reach of the river next to Wright-Patterson Air Force Base is a ground-water discharge area. A steady-state, three-dimensional ground-water-flow model was developed to simulate ground-water flow in the region. The model contains three layers and encompasses about 100 square miles centered on Wright-Patterson Air Force Base. Ground water enters the modeled area primarily by river leakage and underflow at the model boundary. Ground water exits the modeled area primarily by flow through the valleys at the model boundaries and through production wells. A model sensitivity analysis involving systematic changes in values of hydrologic parameters in the model indicates that the model is most sensitive to decreases in riverbed conductance and vertical conductance between the upper two layers. The analysis also indicates that the contribution of water to the buried-valley aquifer from the bedrock that forms the valley walls is about 2 to 4

  17. 77 FR 5781 - Record of Decision for the Air Space Training Initiative Shaw Air Force Base, South Carolina...

    Science.gov (United States)

    2012-02-06

    ..., South Carolina Final Environmental Impact Statement ACTION: Notice of Availability (NOA) of a Record of... through a NOA in the Federal Register (Volume 75, Number 122, Page 36386) with a wait period that ended on... Force actions analyzed in the Final EIS. Authority: This NOA is published pursuant to the...

  18. 76 FR 75453 - Restricted Areas and Danger Zones at Eglin Air Force Base, FL

    Science.gov (United States)

    2011-12-02

    .... The proposed regulations were published in the December 28, 2009, issue of the Federal Register (74 FR... Department of the Army, Corps of Engineers 33 CFR Part 334 Restricted Areas and Danger Zones at Eglin Air...: The U.S. Army Corps of Engineers (Corps) is amending its restricted area/danger zone regulations...

  19. Hydrogeology of the area near the J4 test cell, Arnold Air Force Base, Tennessee

    Science.gov (United States)

    Haugh, C.J.

    1996-01-01

    The U.S. Air Force operates a major aerospace systems testing facility at Arnold Engineering Development Center (AEDC) in Coffee County, Tennessee. Dewatering operations at one of the test facilities, the J4 test cell, has affected the local ground-water hydrology. The J4 test cell is approximately 100 feet in diameter, extends approximately 250 feet below land surface, and penetrates several aquifers. Ground water is pumped continuously from around the test cell to keep the cell structurally intact. Because of the test cell's depth, dewatering has depressed water levels in the aquifers surrounding the site. The depressions that have developed exhibit anisotropy that is controlled by zones of high permeability in the aquifers. Additionally, contaminants - predominately volatile organic compounds - are present in the ground-water discharge from the test cell and in ground water at several other Installation Restoration Program (IRP) sites within the AEDC facility. The dewatering activities at J4 are drawing these contaminants from the nearby sites. The effects of dewatering at the J4 test cell were investigated by studying the lithologic and hydraulic characteristics of the aquifers, investigating the anisotropy and zones of secondary permeability using geophysical techniques, mapping the potentiometric surfaces of the underlying aquifers, and developing a conceptual model of the ground-water-flow system local to the test cell. Contour maps of the potentiometric surfaces in the shallow, Manchester, and Fort Payne aquifers (collectively, part of the Highland Rim aquifer system) show anisotropic water-level depressions centered on the J4 test cell. This anisotropy is the result of features of high permeability such as chert-gravel zones in the regolith and fractures, joints, and bedding planes in the bedrock. The presence of these features of high permeability in the Manchester aquifer results in complex flow patterns in the Highland Rim aquifers near the J4 test cell

  20. Numerical analysis of the in-well vapor-stripping system demonstration at Edwards Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    White, M.D.; Gilmore, T.J.

    1996-10-01

    Numerical simulations, with the Subsurface Transport Over Multiple Phases (STOMP) simulator, were applied to the field demonstration of an in-well vapor-stripping system at Edwards Air Force Base (AFB), near Mojave, California. The demonstration field site on the Edwards AFB was previously contaminated from traversing groundwater that was contained a varied composition of volatile organic compounds (VOCs), which primarily includes trichloroethylene (TCE). Contaminant TCE originated from surface basin that had been used to collect runoff during the cleaning of experimental rocket powered planes in the 1960s and 1970s. This report documents those simulations and associated numerical analyses. A companion report documents the in- well vapor-stripping demonstration from a field perspective.

  1. Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida

    Energy Technology Data Exchange (ETDEWEB)

    Becker, N.M. [Los Alamos National Lab., NM (United States); Vanta, E.B. [Wright Laboratory Armament Directorate, Eglin Air Force Base, FL (United States)

    1995-05-01

    Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980`s at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more than 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments.

  2. Hydrologic transport of depleted uranium associated with open air dynamic range testing at Los Alamos National Laboratory, New Mexico, and Eglin Air Force Base, Florida

    International Nuclear Information System (INIS)

    Hydrologic investigations on depleted uranium fate and transport associated with dynamic testing activities were instituted in the 1980's at Los Alamos National Laboratory and Eglin Air Force Base. At Los Alamos, extensive field watershed investigations of soil, sediment, and especially runoff water were conducted. Eglin conducted field investigations and runoff studies similar to those at Los Alamos at former and active test ranges. Laboratory experiments complemented the field investigations at both installations. Mass balance calculations were performed to quantify the mass of expended uranium which had transported away from firing sites. At Los Alamos, it is estimated that more than 90 percent of the uranium still remains in close proximity to firing sites, which has been corroborated by independent calculations. At Eglin, we estimate that 90 to 95 percent of the uranium remains at test ranges. These data demonstrate that uranium moves slowly via surface water, in both semi-arid (Los Alamos) and humid (Eglin) environments

  3. 78 FR 27126 - East Bay, St. Andrews Bay and the Gulf of Mexico at Tyndall Air Force Base, Florida; Restricted...

    Science.gov (United States)

    2013-05-09

    .... Review Under Executive Order 12866. The proposed rule is issued with respect to a military function of... Gulf of Mexico and Apalachicola Bay south of Apalachicola, Fla., Drone Recovery Area, Tyndall Air Force... heighten security measures is anticipated. (3) Permanent Restricted Areas. (i) Military Point....

  4. Radiation Control Coatings Installed on Federal Buildings at Tyndall Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    Kaba, R.L.; Petrie, T.W.

    1999-03-16

    The technical objectives of this CRADA comprise technology deployment and energy conservation efforts with the radiation control coatings industry and the utility sector. The results of this collaboration include a high-level data reporting, analysis and management system to support the deployment efforts. The technical objectives include successfully install, commission, operate, maintain and document the performance of radiation control coatings on roofs at Tyndall AFB and the Buildings Technology Center at the Oak Ridge National Laboratory; determine the life cycle savings that can be achieved by using radiation control coatings on entire roofs at Tyndall AFB, based on documented installed cost and operating maintenance costs with and without the coatings; determine if any specific improvements are required in the coatings before they can be successfully deployed in the federal sector; determine the most effective way to facilitate the widespread and rapid deployment of radiation control coatings in the federal sector; and clearly define any barriers to deployment.

  5. Species biology and potential for controlling four exotic plants (Ammophila arenaria, Carpobrotus edulis, Cortaderia jubata and Gasoul crystallinum) on Vandenberg Air Force Base, California

    Science.gov (United States)

    Schmalzer, Paul A.; Hinkle, C. Ross

    1987-01-01

    Invasive exotic plants can displace native flora and modify community and ecosystem structure and function. Ammophila arenaria, Corpobrotus edulis, Cortaderia jubata, and Gasoul crystallinum are invasive plants present on Vandenberg Air Force Base, California, designated for study by the Environmental Task Force because of the perceived threat they represent to the native flora. Each plant's native habitat, how they came to be at Vandenberg, their propagation, and how they can be controlled is discussed.

  6. Completion of the Edward Air Force Base Statistical Guidance Wind Tool

    Science.gov (United States)

    Dreher, Joseph G.

    2008-01-01

    The goal of this task was to develop a GUI using EAFB wind tower data similar to the KSC SLF peak wind tool that is already in operations at SMG. In 2004, MSFC personnel began work to replicate the KSC SLF tool using several wind towers at EAFB. They completed the analysis and QC of the data, but due to higher priority work did not start development of the GUI. MSFC personnel calculated wind climatologies and probabilities of 10-minute peak wind occurrence based on the 2-minute average wind speed for several EAFB wind towers. Once the data were QC'ed and analyzed the climatologies were calculated following the methodology outlined in Lambert (2003). The climatologies were calculated for each tower and month, and then were stratified by hour, direction (10" sectors), and direction (45" sectors)/hour. For all climatologies, MSFC calculated the mean, standard deviation and observation counts of the Zminute average and 10-minute peak wind speeds. MSFC personnel also calculated empirical and modeled probabilities of meeting or exceeding specific 10- minute peak wind speeds using PDFs. The empirical PDFs were asymmetrical and bounded on the left by the 2- minute average wind speed. They calculated the parametric PDFs by fitting the GEV distribution to the empirical distributions. Parametric PDFs were calculated in order to smooth and interpolate over variations in the observed values due to possible under-sampling of certain peak winds and to estimate probabilities associated with average winds outside the observed range. MSFC calculated the individual probabilities of meeting or exceeding specific 10- minute peak wind speeds by integrating the area under each curve. The probabilities assist SMG forecasters in assessing the shuttle FR for various Zminute average wind speeds. The A M ' obtained the processed EAFB data from Dr. Lee Bums of MSFC and reformatted them for input to Excel PivotTables, which allow users to display different values with point

  7. Water-surface elevations of wetlands and nearby wells at Arnold Air Force Base, near Manchester, Tennessee

    Science.gov (United States)

    Wolfe, W.J.; League, D.E.

    1996-01-01

    Surface-water stage, ground-water elevations, rainfall, and streamflow were monitored at or near four wetland sites at Arnold Air Force Base, Tennessee. Two of the wetland sites (Sinking Pond and Westall Swamp) included sinkholes with internal relief greater than 7 feet. The other two wetlands (Tupelo Swamp and Goose Pond) were shallow depressions with less than 5 feet internal relief. Stage rose and fell abruptly in the two sinkhole wetlands. Water depths ranged from 0 to 11.4 feet in Sinking Pond and from 0 to 8.5 feet in Westall Swamp. Water levels in wells adjacent to the sinkhole wetlands also rose and fell abruptly. The two shallow depressions filled and drained more gradually and remained flooded longer than the sinkhole wetlands. The maximum recorded water depths were 3.5 feet in Tupelo Swamp and 2.3 feet in Goose Pond. Water levels in nearby wells remained lower than surface-water elevations in the shallow depressions throughout the study period.

  8. [Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio]. Volume 9, Removal action system design

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    This Removal Action System Design has been prepared as a Phase I Volume for the implementation of the Phase II removal action at Wright-Patterson Air Force Base (WPAFB) near Dayton, Ohio. The objective of the removal action is to prevent, to the extent practicable, the migration of ground water contaminated with chlorinated volatile organic compounds (VOCS) across the southwest boundary of Area C. The Phase 1, Volume 9 Removal Action System Design compiles the design documents prepared for the Phase II Removal Action. These documents, which are presented in Appendices to Volume 9, include: Process Design, which presents the 30 percent design for the ground water treatment system (GWTS); Design Packages 1 and 2 for Earthwork and Road Construction, and the Discharge Pipeline, respectively; no drawings are included in the appendix; Design Package 3 for installation of the Ground Water Extraction Well(s); Design Package 4 for installation of the Monitoring Well Instrumentation; and Design Package 5 for installation of the Ground Water Treatment System; this Design Package is incorporated by reference because of its size.

  9. Biologic surveys for the Sandia National Laboratories, Coyote Canyon Test Complex, Kirtland Air Force Base, Albuquerque, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, R.M. [4115 Allen Dr., Kingsville, TX (United States); Knight, P.J. [Marron and Associates, Inc., Corrales, NM (United States)

    1994-05-25

    This report provides results of a comprehensive biologic survey performed in Coyote Canyon Test Complex (CCTC), Sandia National Laboratories (SNL), Bernalillo County, New Mexico, which was conducted during the spring and summer of 1992 and 1993. CCTC is sited on land owned by the Department of Energy (DOE) and Kirtland Air Force Base and managed by SNL. The survey covered 3,760 acres of land, most of which is rarely disturbed by CCTC operations. Absence of grazing by livestock and possibly native ungulates, and relative to the general condition of private range lands throughout New Mexico, and relative to other grazing lands in central New Mexico. Widely dispersed, low intensity use by SNL as well as prohibition of grazing has probably contributed to abundance of special status species such as grama grass cactus within the CCTC area. This report evaluates threatened and endangered species found in the area, as well as comprehensive assessment of biologic habitats. Included are analyses of potential impacts and mitigative measures designed to reduce or eliminate potential impacts. Included is a summary of CCTC program and testing activities.

  10. Hot methanol extraction for the analysis of volatile organic chemicals in subsurface core samples from Dover Air Force Base, Delaware

    Energy Technology Data Exchange (ETDEWEB)

    Ball, W.P.; Xia, G.; Durfee, D.P.; Wilson, R.D.; Brown, M.J.; Mackay, D.M.

    1997-06-01

    The evaluation of contaminant concentrations in ground water and soil is an essential aspect of most hazardous waste remedial investigations. This paper describes methods applied toward obtaining, preserving, and analyzing subsurface samples for the determination of VOC concentration in the saturated region of an unconfined coastal plain aquifer at Dover Air Force Base (DAFB), Delaware. The described protocol involved headspace-free subsampling of cores, field preservation of subsamples in methanol, and overnight extraction of the VOCs at elevated temperature (70 C). Methanol-extracted compounds were subsequently transferred to hexane and analyzed by gas chromatography. The method was found to achieve quantitative extraction from the aquifer sands in a single step, although extraction from fine-grained and more strongly sorbing aquitard samples required multiple methanol extractions to achieve comparable recovery. An extensive set of DAFB results is presented as an indication of how these methods can be applied toward characterizing field-scale contamination with a high degree of resolution and accuracy.

  11. Air Force geographic information and analysis system

    Energy Technology Data Exchange (ETDEWEB)

    Henney, D.A.; Jansing, D.S.; Durfee, R.C.; Margle, S.M.; Till, L.E.

    1987-01-01

    A microcomputer-based geographic information and analysis system (GIAS) was developed to assist Air Force planners with environmental analysis, natural resources management, and facility and land-use planning. The system processes raster image data, topological data structures, and geometric or vector data similar to that produced by computer-aided design and drafting (CADD) systems, integrating the data where appropriate. Data types included Landsat imagery, scanned images of base maps, digitized point and chain features, topographic elevation data, USGS stream course data, highway networks, railroad networks, and land use/land cover information from USGS interpreted aerial photography. The system is also being developed to provide an integrated display and analysis capability with base maps and facility data bases prepared on CADD systems. 3 refs.

  12. Air Force Geophysics Laboratory Magnetometer Network

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This file is comprised of the variation one minute values of the geomagnetic components X, Y and Z. These data were calculated by the Air Force Geophysics...

  13. US Air Force Data Processing Manuals

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data Processing Reference manual for United States Air Force surface stations, circa 1960s. TDF-13 stands for Tape Deck Format number 13, the format in which the...

  14. 基于VR-Force的协同空战效能评估研究%Evaluation effectiveness of cooperate air combat based on VR-Force

    Institute of Scientific and Technical Information of China (English)

    左家亮; 杨任农; 寇雅楠; 张滢

    2011-01-01

    In the air combat, through integrating the main factor of the entity in the combat, and evaluating the hit probability of the entity in theory. On the assign task of the air combat based on the VR-Force develop environment is researched. According to the plan of the task, after edit campaign plan for every entity in the air combat, simulation experiment is done according the air combat plan in VR-Force, evaluate the efficiency of the air combat plan. At last, through comparing the result of the simulation, the value and meaning of the scientific and reasonable task assign plan in the air to air combat is illuminated.%在空战对抗中,通过综合参战实体各项战技指标,从理论上拟合单个实体对对方的杀伤概率.基于VR-Force开发环境,进行协同空战任务分配研究.根据任务分配方案,对每个参战实体制定对应的作战计划,按此方案制作作战想定,进行战场推演,实现效能评估.实验仿真结果与理论推导说明了科学合理的任务分配方案在协同空战中的作用和意义.

  15. Results of the fire training facility siting investigation at Davis-Monthan Air Force Base, Tucson, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Witt, D.A.; Smuin, D.R.; Williams, J.K.

    1988-05-01

    An investigative drilling and sampling survey at the site of a proposed Fire Training Facility (FTF) at Davis--Monthan Air Force Base, Tuscon, Arizona, was conducted. The objectives of this survey were to provide environmental/chemical information and geotechnical characteristics of the site from soil samples collected at the proposed site, to determine the concentrations of volatile organic compounds (VOCs) and petroleum hydrocarbon contaminants in these samples, and to make an assessment of survey data to determine if the proposed FTF site is environmentally and geotechnically suitable. Results of the chemical analyses indicate the presence of subsurface petroleum hydrocarbons directly related to the former fire training burn pits. Although one of the samples was found to have a relatively high concentration of petroleum hydrocarbons (9300 ..mu..g/g), the contamination was limited in vertical extent, and the location of the bore hole was approximately 61 m (200 ft) downgradient from any construction planned for the proposed FTF site. All chemical analyses performed on bore hole samples for VOCs were found to be at or below detection limits. This indicates that no significant subsurface concentrations of hazardous wastes are present at the site of the planned FTF. The geotechnical investigation performed by The Earth Technology Corporation provided several recommendations for construction of the FTF, but presents no data to indicate that the site planned for the proposed FTF is geotechnically unsuitable. The results of this siting investigation support the location of the new FTF in close proximity to the present fire training area as planned. 10 refs., 6 figs.

  16. [Environmental investigation of ground water contamination at Wright- Patterson Air Force Base, Ohio]. Volume 4, Health and Safety Plan (HSP); Phase 1, Task 4 Field Investigation report: Draft

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This Health and Safety Plan (HSP) was developed for the Environmental Investigation of Ground-water Contamination Investigation at Wright-Patterson Air Force Base near Dayton, Ohio, based on the projected scope of work for the Phase 1, Task 4 Field Investigation. The HSP describes hazards that may be encountered during the investigation, assesses the hazards, and indicates what type of personal protective equipment is to be used for each task performed. The HSP also addresses the medical monitoring program, decontamination procedures, air monitoring, training, site control, accident prevention, and emergency response.

  17. Results of the basewide monitoring program at Wright-Patterson Air Force Base, Ohio, 1993-1994

    Science.gov (United States)

    Schalk, C.W.; Cunningham, W.L.

    1996-01-01

    Geologic and hydrologic data were collected at Wright-Patterson Air Force Base (WPAFB), Ohio, as part of Basewide Monitoring Program (BMP) that began in 1992. The BMP was designed as a long-term project to character ground-water and surface-water quality (including streambed sediments), describe water-quality changes as water enters, flows across, and exits the Base, and investigate the effects of activities at WPAFB on regional water quality. Ground water, surface ware, and streambed sediment were sampled in four rounds between August 1993 and September 1994 to provide the analytical data needed to address the objectives of the BMP. Surface-water-sampling rounds were designed to include most of the seasonal hydrologic conditions encountered in southwestern Ohio, including baseflow conditions and spring runoff. Ground-water-sampling rounds were scheduled for times of recession and recharfe. Ground-water data were used to construct water-table, potentiometric, and vertical gradient maps of the WPAFB area. Water levels have not changed significantly since 1987, but the effects of pumping on and near the Base can have a marked effect on water levels in localized areas. Ground-ware gradients generally were downward throughout Area B (the southwestern third of the Base) and in the eastern third of Areas A and C (the northeastern two-thirds of the Base), and were upward in the vicinity of Mad River. Stream-discharge measurements verified these gradients. Many of the U.S. Environmental Protection Agency maximum contaminant level (MCL) exceedances of inorganic constituents in ground water were associated with water from the bedrock. Exceedances of concentrations of chromium and nickel were found consistently in five wells completed in the glacial aquifer beneath the Base. Five organic compounds [trichloroethylene (TCE), tetrachloroethylene (PCE), vinyl chloride, benzene, and bis(2-ethylhexyl) phthalate] were detected at concentrations that exceeded MCLs; all of the TCE

  18. Treatment of Perchlorate-Contaminated Groundwater Using Highly-Selective, Regenerable Anion-Exchange Resins at Edwards Air Force Base

    Energy Technology Data Exchange (ETDEWEB)

    Gu, B.

    2003-05-30

    Selective ion exchange is one of the most effective treatment technologies for removing low levels of perchlorate (ClO{sub 4}{sup -}) from contaminated water because of its high efficiency without adverse impacts on the water quality caused by adding or removing any chemicals or nutrients. This report summarizes both the laboratory and a field pilot-scale studies to determine the ability and efficiency of the bifunctional synthetic resins to remove ClO{sub 4}{sup -} from the contaminated groundwater at the Edwards Air Force Base in California. Regeneration of the resins after groundwater treatment was also evaluated using the FeCl{sub 3}-HCl regeneration technique recently developed at Oak Ridge National Laboratory. On the basis of this study, the bifunctional resin, D-3696 was found to be highly selective toward ClO{sub 4}{sup -} and performed much better than one of the best commercial nitrate-selective resins (Purolite A-520E) and more than an order of magnitude better than the Purolite A-500 resin (with a relatively low selectivity). At an influent concentration of {approx} 450 {micro}g/L ClO{sub 4}{sup -} in groundwater, the bifunctional resin bed treated {approx} 40,000 empty bed volumes of groundwater before a significant breakthrough of ClO{sub 4}{sup -} occurred. The presence of relatively high concentrations of chloride and sulfate in site groundwater did not appear to affect the ability of the bifunctional resin to remove ClO{sub 4}{sup -}. However, the presence of high iron or iron oxyhydroxides and/or biomass in groundwater caused a significant fouling of the resin beds and greatly influenced the effectiveness in regenerating the resins sorbed with ClO{sub 4}{sup -}. Under such circumstances, a prefilter ({approx} 0.5-1 {micro}m) was found to be necessary to remove these particulates and to reduce the risk of fouling of the resin beds. Without significant fouling, the resin bed could be effectively regenerated by the FeCl{sub 3} displacement technique

  19. 77 FR 55465 - US Air Force Exclusive Patent License

    Science.gov (United States)

    2012-09-10

    ... Department of the Air Force US Air Force Exclusive Patent License AGENCY: Air Force Research Laboratory Information Directorate, Rome, New York, Department of the Air Force, DOD. ACTION: Notice of Intent to Issue... Research Laboratory, Office of the Staff Judge Advocate, AFRL/RIJ, 26 Electronic Parkway, Rome, New...

  20. Time-series ground-water-level and aquifer-system compaction data, Edwards Air Force Base, Antelope Valley, California, January 1991 through September 1993

    Science.gov (United States)

    Freeman, L.A.

    1996-01-01

    As part of a study by the U.S. Geological Survey, a monitoring program was implemented to collect time-series ground-water-level and aquifer-system compaction data at Edwards Air Force Base, California. The data presented in this report were collected from 18 piezometers, 3 extensometers, 1 barometer, and 1 rain gage from January 1991 through September 1993. The piezometers and extensometers are at eight sites in the study area. This report discusses the ground-water-level and aquifer-system compaction monitoring networks, and presents the recorded data in graphs. The data reported are available in the data base of the U.S. Geological Survey.

  1. [Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio]. Volume 3, Appendix A, Draft standard operating procedures and elements: Sampling and Analysis Plan (SAP): Phase 1, Task 4, Field Investigation, Draft

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    This report presents information concerning field procedures employed during the monitoring, well construction, well purging, sampling, and well logging at the Wright-Patterson Air Force Base. Activities were conducted in an effort to evaluate ground water contamination.

  2. Superfund Record of Decision (EPA Region 9): Andersen Air Force Base, Operable Unit 3 (MARBO Annex), Yigo, Guam, June 16, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This decision document, a Record of Decision (ROD), presents the selected remedial actions for soil and groundwater at the Marianas/Bonnis Command (MARBO) Annex Operable Unit (OU) at Andersen Air Force Base (AFB), Guam. No risk was found at Waste Pile 5 and the War Dog Borrow Pit, so no further action is planned for these two sites. Current risks associated with soil exceed acceptable risk levels at Waste Pile 6, Waste Pile 7, Landfill 29, and the MARBO Laundry. Based on alternatives evaluated in the OU 3 Focused FS the US Air Force, the USEPA, and Guam have selected Soil Removal (Alternative OU3-D) as the remedy for three of the sites, and Soil Cover (Alternative OU3-C) for one of the sites. Based on alternatives evaluated in the OU-2 Focused FS, the USAF, the USEPA, and the Guam EPA have selected Natural Attenuation with Wellhead Treatment (Alternative G-2) as the remedy for the TCE and PCE contaminated groundwater beneath the MARBO Annex.

  3. Analysis of Aerosol Radiative Forcing over Beijing under Different Air Quality Conditions Using Ground-Based Sun-Photometers between 2013 and 2015

    OpenAIRE

    Wei Chen; Lei Yan; Nan Ding; Mengdie Xie; Ming Lu; Fan Zhang; Yongxu Duan; Shuo Zong

    2016-01-01

    Aerosol particles can strongly affect both air quality and the radiation budget of the atmosphere. Above Beijing, the capital city of China, large amounts of aerosols within the atmospheric column have caused the deterioration of local air quality and have influenced radiative forcings at both the top and the bottom of the atmosphere (BOA and TOA). Observations of aerosol radiative forcing and its efficiency have been made using two sun-photometers in urban Beijing between 2013 and 2015, and ...

  4. AIR FORCE1鸟巢

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    虽然ADIDAS成为了北京奥运会的官方赞助商,但身为其竞争对手的NIKE也不会轻易放弃奥运会这个巨大的商业契机,在近期网络上公布的一组最新的AIR FORCE 1 SAMPLE图片中我们就看到了和北京奥运会相关的几个新配色。

  5. History of Turkish Air Force Aviation School and the Process of Transition to Air Force Academy

    Directory of Open Access Journals (Sweden)

    Osman YALÇIN

    2015-12-01

    Full Text Available Turkish aviation has started as a military entity. The foundation of ‘’Tayyare Komisyonu’’ (Airplane Comission in June 1, 1911 has been accepted as the official starting point. The organization of aviation includes pilot training, airplane supply, fondation of aviation school, establishment of combatant units, and building the air vehicles with local and national endeavour. Later, air defense systems, meteorology, training observers, machine specialist and technicians has gained importance as well. Turkish aviation has been built upon the ruins of the last wars of Ottoman Empire. After the invasion of the British and the French, Ottoman aviators moved to Maltepe and then to various parts of Anatolia eventually. During the Independence War, aviation school was founded in Eskişehir, moved to Adana, Konya, and came back to Adana again. After the Greek forces were expelled from Anatolia via İzmir, aviation school was moved to İzmir. In 1925, it was brought back to Eskişehir on October 1, 1951. After WWII, the duration of training in order to be a pilot was six years. In 1929, aviation school turned out to be an academic institution as well. On October 1, 1951, Air Force Academy was established in Eskişehir. Due to high sound of jet air planes, the academy was moved to İzmir in 1954. Education and training were restructured there and the quality was raised. In 1967, Air Force Academy was moved back to Yeşilköy where Turkish aviation was born some 47 years ago. Due to academic diversity and rich culture heritage, a productive period has started in Istanbul. Air Force Academy has been an institution offering BA level education since 2001 whose process goes back to 1990s. Around 90 civilian and 50 military academicians conduct education and research per year. Military training including Yalova encampment site, affective domain training, and sports activities are also conducted as well. With a 103 years history and around 16.000 graduates

  6. Determining the Probability of Violating Upper-Level Wind Constraints for the Launch of Minuteman Ill Ballistic Missiles At Vandenberg Air Force Base

    Science.gov (United States)

    Shafer, Jaclyn A.; Brock, Tyler M.

    2013-01-01

    The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman Ill ballistic missile. The 30 OSSWF requested the Applied Meteorology Unit (AMU) analyze VAFB sounding data to determine the probability of violating (PoV) upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a graphical user interface (GUI) that will calculate the PoV of each constraint on the day of launch. The AMU suggested also including forecast sounding data from the Rapid Refresh (RAP) model. This would provide further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours, and help to improve the overall upper winds forecast on launch day.

  7. An Assessment of Hickam Air Force Base's Capability to Support Strategic Airlift Throughput when Operating under an Avian Flu Pandemic

    Energy Technology Data Exchange (ETDEWEB)

    Brigantic, Robert T.; Campbell, James R.; Doctor, Pamela G.; Johnson, Alan; Coomber, P.

    2006-03-10

    Hickam Air Force Base (AFB), Hawaii provides an ideal waypoint for U.S. strategic airlift aircraft to refuel and receive other services on their way to Northeast and Southeast Asia from the continental United States. Hickam AFB also serves as a critical aerial port of debarkation (APOD) for deploying U.S. forces and equipment to more distant lands as needed. Making use of the United States Transportation Command’s Aerial Port of Debarkation Plus model, this paper examines the ability of Hickam AFB to serve in its important role as an APOD when operating under the effects of a major avian flu pandemic. In this regard, the major influence on Hickam AFB will be a serious degradation to the number of available personnel to service aircraft and operate Hickam AFB’s aerial port. It is noted that the results presented herein are based on simplistic attrition rate assumptions. Nonetheless, it is envisioned that this work is applicable to more realistic input attrition rates as avian flu epidemiological models are refined, as well as attrition associated with other types of contagious pandemic disease or willful biological warfare attack.

  8. 33 CFR 334.1280 - Bristol Bay, Alaska; air-to-air weapon range, Alaskan Air Command, U.S. Air Force.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Bristol Bay, Alaska; air-to-air weapon range, Alaskan Air Command, U.S. Air Force. 334.1280 Section 334.1280 Navigation and Navigable... REGULATIONS § 334.1280 Bristol Bay, Alaska; air-to-air weapon range, Alaskan Air Command, U.S. Air Force....

  9. Reconstruction of Rayleigh-Lamb dispersion spectrum based on noise obtained from an air-jet forcing

    CERN Document Server

    Larose, Eric; Campillo, Michel

    2007-01-01

    The time-domain cross-correlation of incoherent and random noise recorded by a series of passive sensors contains the impulse response of the medium between these sensors. By using noise generated by a can of compressed air sprayed on the surface of a plexiglass plate, we are able to reconstruct not only the time of flight but the whole waveforms between the sensors. From the reconstruction of the direct $A_0$ and $S_0$ waves, we derive the dispersion curves of the flexural waves, thus estimating the mechanical properties of the material without a conventional electromechanical source. The dense array of receivers employed here allow a precise frequency-wavenumber study of flexural waves, along with a thorough evaluation of the rate of convergence of the correlation with respect to the record length, the frequency, and the distance between the receivers. The reconstruction of the actual amplitude and attenuation of the impulse response is also addressed in this paper.

  10. Hypertension in Indonesian air force pilots

    Directory of Open Access Journals (Sweden)

    Minarma Siagian

    2012-02-01

    Full Text Available Background: To investigate the association between aircraft noise and blood pressure.Methods: A nested case-control study was conducted on Indonesian Air Force pilots doing annual medical check-ups at the Saryanto Institute for Aviation and Aerospace Health (LAKESPRA from 2003 – 2008. The data extracted from medical records were age, total flight hours, type of aircraft, fasting blood glucose and cholesterol levels, waist circumference, height and weight (Body Mass Index, and blood pressure.Results: There were 549 pilots, 49 were found to be hypertensive, with SBP ≥ 140 mmHg and/or DBP ≥ 90 mmHg. Helicopters pilots were at an almost 2 fold risk of hypertension compared to pilots of the fixed wing aircrafts. Pilots with more than 1400 hours of flight had more than 2 fold risk of being hypertensive compared to those with 1400 flight hours or less.Conclusion: The type of aircraft, which is related to the noise generated, may be a risk factor for developing hypertension in pilots. Increased total flight hours also increased the risk of hypertension. (Med J Indones 2012;21:38-43Keywords: Aircraft noise, hypertension, pilots

  11. A Novel Method for Quantifying the Inhaled Dose of Air Pollutants Based on Heart Rate, Breathing Rate and Forced Vital Capacity

    Science.gov (United States)

    Greenwald, Roby; Hayat, Matthew J.; Barton, Jerusha; Lopukhin, Anastasia

    2016-01-01

    To better understand the interaction of physical activity and air pollution exposure, it is important to quantify the change in ventilation rate incurred by activity. In this paper, we describe a method for estimating ventilation using easily-measured variables such as heart rate (HR), breathing rate (fB), and forced vital capacity (FVC). We recruited healthy adolescents to use a treadmill while we continuously measured HR, fB, and the tidal volume (VT) of each breath. Participants began at rest then walked and ran at increasing speed until HR was 160–180 beats per minute followed by a cool down period. The novel feature of this method is that minute ventilation (V˙E) was normalized by FVC. We used general linear mixed models with a random effect for subject and identified nine potential predictor variables that influence either V˙E or FVC. We assessed predictive performance with a five-fold cross-validation procedure. We used a brute force selection process to identify the best performing models based on cross-validation percent error, the Akaike Information Criterion and the p-value of parameter estimates. We found a two-predictor model including HR and fB to have the best predictive performance (V˙E/FVC = -4.247+0.0595HR+0.226fB, mean percent error = 8.1±29%); however, given the ubiquity of HR measurements, a one-predictor model including HR may also be useful (V˙E/FVC = -3.859+0.101HR, mean percent error = 11.3±36%). PMID:26809066

  12. 76 FR 57026 - Air Force Scientific Advisory Board Notice of Meeting

    Science.gov (United States)

    2011-09-15

    ... Force Research Laboratory overview focusing on the Air Force Science and Technology plan emphasizing... Department of the Air Force Air Force Scientific Advisory Board Notice of Meeting AGENCY: Department of the Air Force, U.S. Air Force Scientific Advisory Board ACTION: Meeting Notice. SUMMARY: Under...

  13. [Environmental investigation of ground water contamination at Wright-Patterson Air Force Base, Ohio]. Volume 3, Sampling and analysis plan (SAP): Phase 1, Task 4, Field Investigation: Draft

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    In April 1990, Wright-Patterson Air Force Base (WPAFB), initiated an investigation to evaluate a potential Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) removal action to prevent, to the extent practicable, the offsite migration of contaminated ground water from WPAFB. WPAFB retained the services of the Environmental Management Operations (EMO) and its principle subcontractor, International Technology Corporation (IT) to complete Phase 1 of the environmental investigation of ground-water contamination at WPAFB. Phase 1 of the investigation involves the short-term evaluation and potential design for a program to remove ground-water contamination that appears to be migrating across the western boundary of Area C, and across the northern boundary of Area B along Springfield Pike. Primarily, Task 4 of Phase 1 focuses on collection of information at the Area C and Springfield Pike boundaries of WPAFB. This Sampling and Analysis Plan (SAP) has been prepared to assist in completion of the Task 4 field investigation and is comprised of the Quality Assurance Project Plan (QAPP) and the Field Sampling Plan (FSP).

  14. Brazilian Air Force aircraft structural integrity program: An overview

    OpenAIRE

    Alberto W. S. Mello Junior; Abílio Neves Garcia; Ribeiro Fabrício N.; Daniel Ferreira V. Mattos

    2009-01-01

    This paper presents an overview of the activities developed by the Structural Integrity Group at the Institute of Aeronautics and Space - IAE, Brazil, as well as the status of ongoing work related to the life extension program for aircraft operated by the Brazilian Air Force BAF. The first BAF-operated airplane to undergo a DTA-based life extension was the F-5 fighter, in the mid 1990s. From 1998 to 2001, BAF worked on a life extension project for the BAF AT- 26 Xavante trainer. All analysis ...

  15. 场站油料库存控制策略仿真研究%Research on simulation of fuel inventory control strategy about air-force base

    Institute of Scientific and Technical Information of China (English)

    田丰; 邢清华; 王斌

    2011-01-01

    It is a stochastic inventory control system with sequential demand for the fuel inventory control system in aviation station,the indexes of evaluating the strategy of inventory control and its calculation methods arc provided.The simulation model about the inventory control of air force base based on(Q,s) is established. The better inventory control strategy is built by using the OptQuest optimization toolbox integrated in the Arena at some scopes of initialization about the best inventory control strategy by an example. The simulation results prove that the inventory control strategy given by the simulation model is more feasible and scientific than the current system.%针对场站油料库存控制系统是一个需求为连续的随机库存控制系统,给出了评价其库存控制策略优劣的评价指标及其量化方法;基于仿真软件Arena,建立了基于(Q,s)存储策略的场站油料库存控制仿真模型.通过一个实例,利用Arena中集成的OptQuest优化工具箱搜索在最优库存控制策略初始值一定范围内的较优库存控制策略.结果表明,将所建立的仿真模型应用于场站油料库存控制,得出的控制策略比现行的更科学可行.

  16. Brazilian Air Force aircraft structural integrity program: An overview

    Directory of Open Access Journals (Sweden)

    Alberto W. S. Mello Junior

    2009-01-01

    Full Text Available This paper presents an overview of the activities developed by the Structural Integrity Group at the Institute of Aeronautics and Space - IAE, Brazil, as well as the status of ongoing work related to the life extension program for aircraft operated by the Brazilian Air Force BAF. The first BAF-operated airplane to undergo a DTA-based life extension was the F-5 fighter, in the mid 1990s. From 1998 to 2001, BAF worked on a life extension project for the BAF AT- 26 Xavante trainer. All analysis and tests were performed at IAE. The fatigue critical locations (FCLs were presumed based upon structural design and maintenance data and also from exchange of technical information with other users of the airplane around the world. Following that work, BAF started in 2002 the extension of the operational life of the BAF T-25 “Universal”. The T-25 is the basic training airplane used by AFA - The Brazilian Air Force Academy. This airplane was also designed under the “safe-life” concept. As the T-25 fleet approached its service life limit, the Brazilian Air Force was questioning whether it could be kept in flight safely. The answer came through an extensive Damage Tolerance Analysis (DTA program, briefly described in this paper. The current work on aircraft structural integrity is being performed for the BAF F-5 E/F that underwent an avionics and weapons system upgrade. Along with the increase in weight, new configurations and mission profiles were established. Again, a DTA program was proposed to be carried out in order to establish the reliability of the upgraded F-5 fleet. As a result of all the work described, the BAF has not reported any accident due to structural failure on aircraft submitted to Damage Tolerance Analysis.

  17. 78 FR 18326 - U.S. Air Force Scientific Advisory Board; Notice of Meeting

    Science.gov (United States)

    2013-03-26

    ... outbriefs, as well as discussion of the SAB's review of Air Force Research Laboratory (AFRL) science and... Department of the Air Force U.S. Air Force Scientific Advisory Board; Notice of Meeting AGENCY: Department of the Air Force, U.S. Air Force Scientific Advisory Board. ACTION: Meeting notice. SUMMARY: Under...

  18. 76 FR 78906 - U.S. Air Force Scientific Advisory Board Notice of Meeting

    Science.gov (United States)

    2011-12-20

    ... Oxygen Generation Study; review of the recently completed SAB Air Force Research Laboratory science and... Department of the Air Force U.S. Air Force Scientific Advisory Board Notice of Meeting AGENCY Department of the Air Force, U.S. Air Force Scientific Advisory Board. ACTION Meeting Notice. SUMMARY: Under...

  19. 77 FR 73026 - U.S. Air Force Scientific Advisory Board Notice of Meeting

    Science.gov (United States)

    2012-12-07

    ... study outbriefs, as well as discussion of the SAB's review of Air Force Research Laboratory (AFRL... Department of the Air Force U.S. Air Force Scientific Advisory Board Notice of Meeting AGENCY: U.S. Air Force Scientific Advisory Board, Department of the Air Force, DOT. ACTION: Meeting Notice. SUMMARY: Under...

  20. Use of Borehole-Radar Methods to Monitor a Steam-Enhanced Remediation Pilot Study at a Quarry at the Former Loring Air Force Base, Maine

    Science.gov (United States)

    Gregoire, Colette; Joesten, Peter K.; Lane, Jr., John W.

    2007-01-01

    Single-hole radar reflection and crosshole radar tomography surveys were used in conjunction with conventional borehole-geophysical methods to evaluate the effectiveness of borehole-radar methods for monitoring the movement of steam and heat through fractured bedrock. The U.S. Geological Survey, in cooperation with U.S. Environmental Protection Agency (USEPA), conducted surveys in an abandoned limestone quarry at the former Loring Air Force Base during a field-scale, steam-enhanced remediation (SER) pilot project conducted by the USEPA, the U.S. Air Force, and the Maine Department of Environmental Protection to study the viability of SER to remediate non-aqueous phase liquid contamination in fractured bedrock. Numerical modeling and field experiments indicate that borehole-radar methods have the potential to monitor the presence of steam and to measure large temperature changes in the limestone matrix during SER operations. Based on modeling results, the replacement of water by steam in fractures should produce a decrease in radar reflectivity (amplitude of the reflected wave) by a factor of 10 and a change in reflection polarity. In addition, heating the limestone matrix should increase the bulk electrical conductivity and decrease the bulk dielectric permittivity. These changes result in an increase in radar attenuation and an increase in radar-wave propagation velocity, respectively. Single-hole radar reflection and crosshole radar tomography data were collected in two boreholes using 100-megahertz antennas before the start of steam injection, about 10 days after the steam injection began, and 2 months later, near the end of the injection. Fluid temperature logs show that the temperature of the fluid in the boreholes increased by 10?C (degrees Celsius) in one borehole and 40?C in the other; maximum temperatures were measured near the bottom of the boreholes. The results of the numerical modeling were used to interpret the borehole-radar data. Analyses of the

  1. Design and Development of Intracavity Optical Parametric Oscillator-based Eye Safe Laser Operating at 20 Hz without Forced Air Cooling

    Directory of Open Access Journals (Sweden)

    Atul Bhardwaj

    2013-12-01

    Full Text Available In this paper we report the design and development of an electro-optically Q-switched diode pumped Nd:YAG laser with intracavity optical parametric oscillator, generating ~ 5 ns laser pulses of ~8 mJ energy at eye safe wavelength of 1534 nm. A Z-shaped laser resonator has been designed with porro prism end reflector in Q-switch arm containing RTP Q-Switch and a suitably oriented waveplate. The gain arm consists of a Ø3 x 72 mm Nd: YAG laser rod, pumped from one side by 3 x 5 bar laser diode array stack emitting total optical peak power of 740 W at 804 nm at 38 °C. Thermoelectric coolers (TECs have been employed to maintain the optimum temperature of laser diode arrays and the combined heat load from the pump chamber and TECs is distributed over the system base plate with embedded heat pipes. Such cooling mechanism has eliminated the requirement of fins and fans in the laser system. Eye safe radiation is out-coupled through intra cavity KTA OPO (5 x 5 x 20 mm3 placed in the gain arm. Laser was operated at 20 Hz for several duty cycles of 10 min on and 10 min off and output energy remained stable within ±0.5 mJ without any forced air/liquid cooling.Defence Science Journal, 2013, 63(6, pp.599-605, DOI:http://dx.doi.org/10.14429/dsj.63.5759

  2. 77 FR 33202 - Department of the Air Force

    Science.gov (United States)

    2012-06-05

    ..., Massachusetts 01887, a partially exclusive license, the exclusive portion limited to the field of cyber security... amended; the Department of the Air Force announces its intention to grant SCADA Security Innovation,...

  3. 78 FR 78944 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-12-27

    ... of Air Force history since 1947. 2. Accounting for the socio-cultural dimensions of force structure...-cultures within the Air Force. 3:10 p.m.--Shaping and Sizing the Force 1. How to institutionalize the...

  4. 76 FR 71333 - U.S. Air Force Academy Board of Visitors Notice of Meeting

    Science.gov (United States)

    2011-11-17

    ... perspective on Diversity; the Air Force Academy Athletic Corporation; Air Force Academy fiscal issues; and the... with the approval of the DFO and Chairperson. For the benefit of the public, rosters that list the... Department of the Air Force U.S. Air Force Academy Board of Visitors Notice of Meeting AGENCY: U.S. Air...

  5. 75 FR 81591 - U.S. Air Force Scientific Advisory Board Notice of Meeting

    Science.gov (United States)

    2010-12-28

    ... Force Research Laboratory Science and Technology FY11 Review. Pursuant to 5 U.S.C. 552b, as amended, and... Department of the Air Force U.S. Air Force Scientific Advisory Board Notice of Meeting AGENCY: Department of the Air Force, U.S. Air Force Scientific Advisory Board. ACTION: Meeting notice. SUMMARY: Under...

  6. Determining the Probability of Violating Upper-Level Wind Constraints for the Launch of Minuteman III Ballistic Missiles at Vandenberg Air Force Base

    Science.gov (United States)

    Shafer, Jaclyn A.; Brock, Tyler M.

    2012-01-01

    The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman Ill ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The AMU determined the theoretical distributions that best fit the maximum wind speed and maximum wind shear datasets and applied this information when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition, the AMU included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on the day of launch. The AMU developed an interactive graphical user interface (GUI) in Microsoft Excel using Visual Basic for Applications. The GUI displays the critical sounding data easily and quickly for LWOs on day of launch. This tool will replace the existing one used by the 30 OSSWF, assist the LWOs in determining the probability of exceeding specific wind threshold values, and help to improve the overall upper winds forecast for

  7. Potentiometric surfaces, summer 2013 and winter 2015, and select hydrographs for the Southern High Plains aquifer, Cannon Air Force Base, Curry County, New Mexico

    Science.gov (United States)

    Collison, Jake

    2016-04-07

    Cannon Air Force Base (Cannon AFB) is located in the High Plains physiographic region of east-central New Mexico, about 5 miles west of Clovis, New Mexico. The area surrounding Cannon AFB is primarily used for agriculture, including irrigated cropland and dairies. The Southern High Plains aquifer is the principal source of water for Cannon AFB, for the nearby town of Clovis, and for local agriculture and dairies. The Southern High Plains aquifer in the vicinity of Cannon AFB consists of three subsurface geological formations: the Chinle Formation of Triassic age, the Ogallala Formation of Tertiary age, and the Blackwater Draw Formation of Quaternary age. The Ogallala Formation is the main water-yielding formation of the Southern High Plains aquifer. Groundwater-supplied, center-pivot irrigation dominates pumping from the Southern High Plains aquifer in the area surrounding Cannon AFB, where the irrigation season typically extends from early March through October. The U.S. Geological Survey has been monitoring groundwater levels in the vicinity of Cannon AFB since 1954 and has developed general potentiometric-surface maps that show groundwater flow from northwest to southeast in the study area. While previous potentiometric-surface maps show the general direction of groundwater flow, a denser well network is needed to show details of groundwater flow at a local scale. Groundwater levels were measured in 93 wells during summer 2013 and 100 wells during winter 2015.The summer and winter potentiometric-surface maps display the presence of what is interpreted to be a groundwater trough trending from the northwest to the southeast through the study area. This groundwater trough may be the hydraulic expression of a Tertiary-age paleochannel. Groundwater north of the trough flows in a southerly direction into the trough, and groundwater south of the trough flows in an easterly direction into the trough.During the 18-month period between summer 2013 and winter 2015, changes

  8. MEASUREMENT OF ADHESION FORCES IN AIR WITH THE VIBRATION METHOD

    Institute of Scientific and Technical Information of China (English)

    Siegfried; Ripperger; Konrad; Hein

    2005-01-01

    The vibration method represents a practical method for the measurement of adhesion forces and adhesion force distributions. This method causes sinusoidally altemating stresses and yields detachment and contact forces between particles and substrate of the same order of magnitude. Alternating contact forces of the vibration method can cause an adhesion force intensification through flattening of asperities. The measuring principle of the vibration method and the analysis of experimental results are described in the article. Normal adhesion forces (pull-off forces) are measured using the vibration method and the colloidal probe technique. The results of both methods show good agreement for small particle sizes. The influence of the detachment force direction is shown by comparing tangential and normal adhesion forces measured using particle reentrainment in a turbulent air flow and the vibration method, respectively. The surface roughness of the substrate and the relative humidity are shown to significantly influence the measured adhesion forces. For the calculation of the adhesion forces, an approach by Rabinovich was combined with approximations of plastic micro asperity flattening. The Rabinovich approach accounts for roughness effects on the van der Waals force by incorporating the rms roughness of the interacting surfaces. rms-values of the particles and substrates were measured with atomic force microscopy at different scanning areas.

  9. User guide for the Air Force Base Automotive Transportation Simulation Model - BATS. Volume 2. Documentation. Final report Jun 78-Sep 79

    Energy Technology Data Exchange (ETDEWEB)

    Sandys, R.

    1979-09-01

    The Base Automotive Transportation Simulation (BATS) Model is a transportation planning and traffic flow model designed to simulate traffic volumes and flows on an air base. The principal model inputs are a road network, land use zones, demographic varibles, and gate counts. The land use zones and demographic variables are used to assign volumes to the road network, and these volumes are calibrated using the gate counts. The flow characteristics on each road in the network are simulated using the volumes assigned. Average speed and volumes are the results of the model and these may be directly input to the Air Quality Assessment Model (AQAM) to estimate pollutant emissions and dispersion from traffic sources. A volume flow plot of the network is an optional output of the model.

  10. Aquifer-System Compaction and Land Subsidence: Measurements, Analyses, and Simulations-the Holly Site, Edwards Air Force Base, Antelope Valley, California

    Science.gov (United States)

    Sneed, Michelle; Galloway, Devin L.

    2000-01-01

    Land subsidence resulting from ground-water-level declines has long been recognized as a problem in Antelope Valley, California. At Edwards Air Force Base (EAFB), ground-water extractions have caused more than 150 feet of water-level decline, resulting in nearly 4 feet of subsidence. Differential land subsidence has caused sinklike depressions and earth fissures and has accelerated erosion of the playa lakebed surface of Rogers Lake at EAFB, adversely affecting the runways on the lakebed which are used for landing aircraft such as the space shuttles. Since 1990, about 0.4 foot of aquifer-system compaction has been measured at a deep (840 feet) borehole extensometer (Holly site) at EAFB. More than 7 years of paired ground-water-level and aquifer-system compaction measurements made at the Holly site were analyzed for this study. Annually, seasonal water-level fluctuations correspond to steplike variations in aquifer-system compaction; summer water-level drawdowns are associated with larger rates of compaction, and winter water-level recoveries are associated with smaller rates of compaction. The absence of aquifer-system expansion during recovery is consistent with the delayed drainage and resultant delayed, or residual, compaction of thick aquitards. A numerical one-dimensional MODFLOW model of aquitard drainage was used to refine estimates of aquifer-system hydraulic parameters that control compaction and to predict potential future compaction at the Holly site. The analyses and simulations of aquifer-system compaction are based on established theories of aquitard drainage. Historical ground-water-level and land-subsidence data collected near the Holly site were used to constrain simulations of aquifer-system compaction and land subsidence at the site for the period 1908?90, and ground-water-level and aquifer- system compaction measurements collected at the Holly site were used to constrain the model for the period 1990?97. Model results indicate that two thick

  11. The impact of international shipping on European air quality and climate forcing

    Energy Technology Data Exchange (ETDEWEB)

    van Aardenne, J. [European Environment Agency (EEA), Copenhagen (Denmark); Colette, A. [INERIS (France); Degraeuwe, B.; de Vlieger, I. [VITO (Belgium); Hammingh, P. [PBL Netherlands Environmental Assessment Agency (Netherlands); Viana, M. [CSIC (Spain)

    2013-03-15

    This EEA Technical report provides an overview on the state of knowledge on the impact of international shipping in European waters to air quality and climate change. Based on literature review and model assessment studies information is provided on past and future emissions of air pollutants and greenhouse gases, monitoring of ship emissions, emission mitigation policies and impact on European air quality and radiative forcing. (Author)

  12. Laryngeal Cuff Force Application Modeling During Air Medical Evacuation Simulation.

    Science.gov (United States)

    Eisenbrey, David; Eisenbrey, Arthur B; Pettengill, Patrick

    2016-01-01

    Endotracheal tubes are intended to protect the airway and assist with mechanical ventilation in sedated patients. The blood vessels of the tracheal mucosa can be compressed by high tracheal tube cuff pressures (> 30 cm H2O), leading to reduced mucosal blood flow with resulting ischemia and morbidity. Previous research showed a direct correlation between aircraft pressure altitude and the pressure reading from the tracheal cuff, with resulting pressures > 80 cm H2O at 10,000 ft. Standard practice is to periodically remove air from the cuff during ascent based on assumed increased pressure on the adjacent tracheal mucosa. Using a vacuum chamber and a direct reading micropressure sensor in a 22-mm-diameter semirigid tube, we assessed the direct force applied by the tracheal cuff against the laryngeal tube analog. Standard tracheal cuffs showed direct force/pressure relationships when properly inflated to 20 cm H2O but much less than reported in the literature. Current literature reports values of 55 to 150 cm H2O at 5,000 ft, whereas we report 23 to 25 cm H2O. Our data indicate that a properly inflated cuff does not exceed the critical pressure of 30 cm H2O until the altitude exceeds 8,000 ft. Thus, the standard practice of deflating the laryngeal cuff on ascent should be reconsidered because it may be counterproductive to patient safety. PMID:27637439

  13. Forced convection heat transfer to air/water vapor mixtures

    Science.gov (United States)

    Richards, D. R.; Florschuetz, L. W.

    1986-01-01

    Heat transfer coefficients were measured using both dry air and air/water vapor mixtures in the same forced convection cooling test rig (jet array impingement configurations) with mass ratios of water vapor to air up to 0.23. The primary objective was to verify by direct experiment that selected existing methods for evaluation of viscosity and thermal conductivity of air/water vapor mixtures could be used with confidence to predict heat transfer coefficients for such mixtures using as a basis heat transfer data for dry air only. The property evaluation methods deemed most appropriate require as a basis a measured property value at one mixture composition in addition to the property values for the pure components.

  14. [Forced Oscillations of DNA Bases].

    Science.gov (United States)

    Yakushevich, L V; Krasnobaeva, L A

    2016-01-01

    This paper presents the results of the studying of forced angular oscillations of the DNA bases with the help of the mathematical model consisting of two coupled nonlinear differential equations that take into account the effects of dissipation and the influence of an external periodic field. The calculation results are illustrated for sequence of gene encoding interferon alpha 17 (IFNA 17). PMID:27192830

  15. Innovating to integrate the intangibles into the learning Air Force.

    Science.gov (United States)

    Hazen, Benjamin T; Weigel, Fred K; Overstreet, Robert E

    2014-01-01

    United States federal law and other regulations require the US military services to provide professional military education to their forces. Meeting that requirement will become increasingly difficult with the absence of a federal government budget, significant cuts to defense spending, and expected future cuts to both defense spending and manpower. Additionally, the operations tempo remains high despite the withdrawal of troops from Iraq and the planned withdrawal from Afghanistan. The resulting time and budget constraints will likely make it more difficult for the services to provide every member with the opportunity to compete for positions in coveted in-residence professional military education programs. Thus, the Air Force is considering a new lifetime learning approach to professional military education. As the Air Force seeks to develop its new paradigm, we must understand what benefits of the current system should be retained and what drawbacks should be allayed. Unfortunately, there is little research in this area. We content analyze data collected from Air Force officers attending in-residence professional military education, synthesize our findings with education and technology literature, and suggest innovative technologies that can maximize the intangible benefits and minimize the drawbacks of professional military education. The blended approach we present can create a richer, more meaningful learning experience for the service member, while simultaneously lowering the cost per member and providing greater opportunity to attend in-residence professional military education. PMID:24488877

  16. Innovating to integrate the intangibles into the learning Air Force.

    Science.gov (United States)

    Hazen, Benjamin T; Weigel, Fred K; Overstreet, Robert E

    2014-01-01

    United States federal law and other regulations require the US military services to provide professional military education to their forces. Meeting that requirement will become increasingly difficult with the absence of a federal government budget, significant cuts to defense spending, and expected future cuts to both defense spending and manpower. Additionally, the operations tempo remains high despite the withdrawal of troops from Iraq and the planned withdrawal from Afghanistan. The resulting time and budget constraints will likely make it more difficult for the services to provide every member with the opportunity to compete for positions in coveted in-residence professional military education programs. Thus, the Air Force is considering a new lifetime learning approach to professional military education. As the Air Force seeks to develop its new paradigm, we must understand what benefits of the current system should be retained and what drawbacks should be allayed. Unfortunately, there is little research in this area. We content analyze data collected from Air Force officers attending in-residence professional military education, synthesize our findings with education and technology literature, and suggest innovative technologies that can maximize the intangible benefits and minimize the drawbacks of professional military education. The blended approach we present can create a richer, more meaningful learning experience for the service member, while simultaneously lowering the cost per member and providing greater opportunity to attend in-residence professional military education.

  17. Arnold family in acoustically forced air bubble formation

    International Nuclear Information System (INIS)

    We applied an integrate-and-fire model with sinusoidal baseline and constant threshold to describe air bubble formation periodically forced by a sound wave. The model is a deterministic one-dimensional system that predicts the instant of a bubble detachment as a function of the previous one and it is able to reproduce long time behavior with great similarity. The changes in the dynamics as the air flow rate varies can be predicted by a curve in the parameter space of the so called Arnold family of circle maps.

  18. Reassessing the Air Force's Selective Re-Enlistment Bonus Program

    OpenAIRE

    Dedrick, Chandria Y.

    2010-01-01

    MBA Professional Report The objective of this MBA project is to reassess the Air Force's current Selective Reenlistment Bonus Program and provide a possible alternative for the compensation calculation. To find that alternative method of calculation, the goal of this project was to create an experiment using a second priced sealed bid auction. The experiment would provide an insight to truth revealing compensation requests for future job continuation. This essential tool will allow th...

  19. Steady Thermal Field Simulation of Forced Air-cooled Column-type Air-core Reactor

    Institute of Scientific and Technical Information of China (English)

    DENG Qiu; LI Zhenbiao; YIN Xiaogen; YUAN Zhao

    2013-01-01

    Modeling the steady thermal field of the column-type air-core reactor,and further analyzing its distribution regularity,will help optimizing reactor design as well as improving its quality.The operation mechanism and inner insulation structure of a novel current limiting column-type air-core reactor is introduced in this paper.The finite element model of five encapsulation forced air-cooled column type air-core reactor is constructed using Fluent.Most importantly,this paper present a new method that,the steady thermal field of reactor working under forced air-cooled condition is simulated without arbitrarily defining the convection heat transfer coefficient for the initial condition; The result of the thermal field distribution shows that,the maximum steady temperature rise of forced air-cooled columntype air-core reactor happens approximately 5% to its top.The law of temperature distribution indicates:In the 1/3part of the reactor to its bottom,the temperature will rise rapidly to the increasing of height,yet the gradient rate is gradually decreasing; In the 5 % part of the reactor to its top,the temperature will drop rapidly to the increasing of height; In the part between,the temperature will rise slowly to the increasing of height.The conclusion draws that more thermal withstand capacity should be considered at the 5 % part of the reactor to its top to achieve optimal design solution.

  20. Deployment stressors and outcomes among Air Force chaplains.

    Science.gov (United States)

    Levy, Hannah C; Conoscenti, Lauren M; Tillery, John F; Dickstein, Benjamin D; Litz, Brett T

    2011-06-01

    Military chaplains are invaluable caregiver resources for service members. Little is known about how chaplains respond to the challenge of providing spiritual counsel in a warzone. In this exploratory study, 183 previously deployed Air Force chaplains completed an online survey assessing operational and counseling stress exposure, posttraumatic stress disorder (PTSD) symptoms, compassion fatigue, and posttraumatic growth. Despite reporting exposure to stressful counseling experiences, Air Force chaplains did not endorse high compassion fatigue. Rather, chaplains experienced positive psychological growth following exposure to stressful counseling experiences. However, 7.7% of Air Force chaplains reported clinically significant PTSD symptoms, suggesting that they are not immune to deployment-related mental health problems. Simultaneous regression analyses revealed that counseling stress exposure predicted compassion fatigue (β = .20) and posttraumatic growth (β = .24), suggesting that caretaking in theatre is stressful enough to spur positive psychological growth in chaplains. Consistent with findings from previous studies, hierarchical regression analyses revealed that operational stress exposure predicted PTSD symptom severity (β = .33) while controlling for demographic variables. PMID:21567477

  1. 75 FR 44214 - Notice of Meeting of the Agricultural Air Quality Task Force

    Science.gov (United States)

    2010-07-28

    ... Quality Task Force AGENCY: Natural Resources Conservation Service, United States Department of Agriculture. ACTION: Notice of meeting. SUMMARY: The Agricultural Air Quality Task Force (AAQTF) will meet to...

  2. 77 FR 1913 - Notice of Meeting of the Agricultural Air Quality Task Force

    Science.gov (United States)

    2012-01-12

    ... Quality Task Force AGENCY: Natural Resources Conservation Service, USDA. ACTION: Notice of Meeting. SUMMARY: The Department of Agriculture (USDA), Agricultural Air Quality Task Force (AAQTF) will meet...

  3. Response of air stagnation frequency to anthropogenically enhanced radiative forcing.

    Science.gov (United States)

    Horton, Daniel E; Harshvardhan; Diffenbaugh, Noah S

    2012-01-01

    Stagnant atmospheric conditions can lead to hazardous air quality by allowing ozone and particulate matter to accumulate and persist in the near-surface environment. By changing atmospheric circulation and precipitation patterns, global warming could alter the meteorological factors that regulate air stagnation frequency. We analyze the response of the National Climatic Data Center (NCDC) Air Stagnation Index (ASI) to anthropogenically enhanced radiative forcing using global climate model projections of late-21(st) century climate change (SRES A1B scenario). Our results indicate that the atmospheric conditions over the highly populated, highly industrialized regions of the eastern United States, Mediterranean Europe, and eastern China are particularly sensitive to global warming, with the occurrence of stagnant conditions projected to increase 12-to-25% relative to late-20(th) century stagnation frequencies (3-18+ days/year). Changes in the position/strength of the polar jet, in the occurrence of light surface winds, and in the number of precipitation-free days all contribute to more frequent late-21(st) century air mass stagnation over these high-population regions. In addition, we find substantial inter-model spread in the simulated response of stagnation conditions over some regions using either native or bias corrected global climate model simulations, suggesting that changes in the atmospheric circulation and/or the distribution of precipitation represent important sources of uncertainty in the response of air quality to global warming. PMID:23284587

  4. Using PHM to measure equipment usable life on the Air Force's next generation reusable space booster

    Science.gov (United States)

    Blasdel, A.

    The U.S. Air Force procures many launch vehicles and launch vehicle services to place their satellites at their desired location in space. The equipment on-board these satellite and launch vehicle often suffer from premature failures that result in the total loss of the satellite or a shortened mission life sometimes requiring the purchase of a replacement satellite and launch vehicle. The Air Force uses its EELV to launch its high priority satellites. Due to a rise in the cost of purchasing a launch using the Air Force's EELV from 72M in 1997 to as high as 475M per launch today, the Air Force is working to replace the EELV with a reusable space booster (RSB). The RSB will be similar in design and operations to the recently cancelled NASA reusable space booster known as the Space Shuttle. If the Air Force uses the same process that procures the EELV and other launch vehicles and satellites, the RSB will also suffer from premature equipment failures thus putting the payloads at a similar high risk of mission failure. The RSB is expected to lower each launch cost by 50% compared to the EELV. The development of the RSB offers the Air Force an opportunity to use a new reliability paradigm that includes a prognostic and health management program and a condition-based maintenance program. These both require using intelligent, decision making self-prognostic equipment The prognostic and health management program and its condition-based maintenance program allows increases in RSB equipment usable life, lower logistics and maintenance costs, while increasing safety and mission assurance. The PHM removes many decisions from personnel that, in the past resulted in catastrophic failures and loss of life. Adding intelligent, decision-making self-prognostic equipment to the RSB will further decrease launch costs while decreasing risk and increasing safety and mission assurance.

  5. 32 CFR 806.29 - Administrative processing of Air Force FOIA requests.

    Science.gov (United States)

    2010-07-01

    ... came from another Air Force element, or release of the requested records would affect another Air Force..., or are classified up to the SECRET level, send them separately to AFLSA/JACL, 1501 Wilson...

  6. 78 FR 53133 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-08-28

    ... representatives from the Michigan Governor's office, local U.S. Air Force and Michigan National Guard leadership... Air Force, taking advantage of the unique strengths and capabilities of each; (c) ensures that...

  7. 78 FR 40730 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-07-08

    ... defense think tanks, U.S. Air Force leadership, and the Congressional Budget Office have been asked to... balance between the regular and reserve components of the Air Force, taking advantage of the...

  8. The Impact of the Developmental Training Model on Staff Development in Air Force Child Development Programs

    Science.gov (United States)

    Bird, Candace Maria Edmonds

    2010-01-01

    In an effort to standardize training delivery and to individualize staff development based on observation and reflective practice, the Air Force implemented the Developmental Training Model (DTM) in its Child Development Programs. The goal of the Developmental Training Model is to enhance high quality programs through improvements in the training…

  9. Cognitive and Teaching Style Preferences of Officers Attending the Air Force Reserve Officer Training Instructor Course

    Science.gov (United States)

    Kraska, Marie; Harris, Stephen

    2007-01-01

    The purpose of this study was to investigate the relationship between the cognitive style and teaching style preferences of instructors enrolled in the Reserve Officer Training Corps instructor course at the Academic Instructor School at Maxwell Air Force base. Sixty-five cases were examined for two research questions: (1) To what extent is there…

  10. 78 FR 32241 - U.S. Air Force Seeks Industry Input for National Security Space Launch Assessment

    Science.gov (United States)

    2013-05-29

    ... Department of the Air Force U.S. Air Force Seeks Industry Input for National Security Space Launch Assessment AGENCY: Office of the Deputy Under Secretary of the Air Force for Space, Department of the Air Force, DOD..., Office of the Deputy Under Secretary of the Air Force for Space, seeks industry views and perspectives...

  11. 77 FR 24480 - U.S. Air Force Academy Board of Visitors Notice of Meeting

    Science.gov (United States)

    2012-04-24

    ... Department of the Air Force U.S. Air Force Academy Board of Visitors Notice of Meeting AGENCY: U.S. Air Force....S.C. 9355 and 41 CFR 102-3.150, the U.S. Air Force Academy (USAFA) Board of Visitors (BoV) will hold... Brief; a USAFA Diversity Budget Update; and a Subcommittee Out-brief. In accordance with 5 U.S.C....

  12. The Air Force Air Program and Information Management System (APIMS): A flexible tool for managing your Title V Operating Permits

    Energy Technology Data Exchange (ETDEWEB)

    Weston, A.A.; Gordon, S.R.

    1999-07-01

    The Air Force Command Core System (CCS) is an integrated, activity-based risk management system designed to support the information needs of Environment, Safety, and Occupational Health (ESOH) professionals. These professionals are responsible for managing a complex and often dynamic set of requirements, and therefore, have a need for an information system that can readily be customized to meet their specific needs. This dynamic environment also drives the need for flexibility in the system. The Air Program Information Management System (APIMS) is a module within CCS designed to not only manage permit compliance and emission inventories, but also support the monitoring, recordkeeping, and reporting requirements related to air quality issues. This paper will describe the underlying foundation of CCS, the information linkages within the database, and then summarize the functionality available within the APIMS module to support the Air Quality Managers' information needs, placing emphasis on the flexibility the system provides to manage Title V Operating Permits.

  13. 76 FR 27003 - Notice of Meeting of the Agricultural Air Quality Task Force

    Science.gov (United States)

    2011-05-10

    ... Natural Resources Conservation Service Notice of Meeting of the Agricultural Air Quality Task Force AGENCY...: Notice of meeting. SUMMARY: The Agricultural Air Quality Task Force (AAQTF) will meet to continue... Updates D. Federal Travel Regulations E. Air Quality Issues/Concerns from Previous Task Force...

  14. 78 FR 10127 - Request for Nominations to the Agricultural Air Quality Task Force

    Science.gov (United States)

    2013-02-13

    ... Air Quality Task Force AGENCY: Natural Resources Conservation Service, United States Department of Agriculture. ACTION: Notice of Request for Nominations to the Agricultural Air Quality Task Force. SUMMARY... term on the Agricultural Air Quality Task Force (AAQTF) which was established by the...

  15. Evaluating Cadet Leadership Positions at the U.S. Air Force Academy

    Science.gov (United States)

    Didier, Jeremy M.

    2012-01-01

    The U.S. Air Force relies on effective leadership to complete its mission. The U.S. Air Force Academy exists to develop leaders of character for the Air Force through a four-year program. Part of this program involves cadets participating in leadership positions. By exploring nine types of cadet leadership positions, this dissertation aims to…

  16. 32 CFR 865.5 - Decision of the Secretary of the Air Force.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Decision of the Secretary of the Air Force. 865.5 Section 865.5 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ORGANIZATION AND MISSION-GENERAL PERSONNEL REVIEW BOARDS Air Force Board for Correction of Military...

  17. 77 FR 52316 - U.S. Air Force Academy Board of Visitors; Notice of Meeting

    Science.gov (United States)

    2012-08-29

    ... Department of the Air Force U.S. Air Force Academy Board of Visitors; Notice of Meeting AGENCY: U.S. Air Force Academy Board of Visitors, DoD. ACTION: Meeting notice. SUMMARY: In accordance with 10 U.S.C. 9355... Diversity in the Dean's Faculty brief. In accordance with 5 U.S.C. 552b, as amended, and 41 CFR...

  18. Ejection experience in Serbian air force, 1990-2010

    Directory of Open Access Journals (Sweden)

    Pavlović Miroslav

    2014-01-01

    Full Text Available Background/Aim. Ejection injuries are the problem for air forces. The present risk for injuries is still too high, approximately 30-50%. This study was an effort to determine factors responsible for and contributing to injuries in the Serbian Air Force (SAF in the last two decades. Methods. All ejection cases in the SAF between 1990 and 2010 were analyzed. The collected data were: aircraft type, ejection seat generation, pilots ´ age and experience, causes of ejection, aeronautical parameters, the condition of aircraft control and types of injuries. For ease of comparison the U.S. Air Force Safety Regulation was used to define of major injuries: hospitalization for 5 days or more, loss of consciousness for over 5 min, bone fracture, joint dislocation, injury to any internal organ, any third-degree burn, or second-degree burn over 5% of the body surface area. Results. There were 52 ejections (51 pilots and 1 mechanic on 44 airplanes. The ejected persons were from 22 to 46 years, average 32 years. Major injuries were present in 25.49% cases. Of all the ejected pilots 9.61% had fractures of thoracic spine, 11.53% fractures of legs, 3.48% fractures of arms. Of all major injuries, fractures of thoracic spine were 38.46%. None of the pilots had experienced ejection previously. Conclusion. Our results suggest to obligatory take preventive measures: magnetic resonance imaging (MRI scan must be included in the standard pilot selection procedure and procedure after ejection. Physical conditioning of pilots has to be improved. Training on ejection trainer has to be accomplished, too.

  19. Noise impacts from professional dog grooming forced-air dryers

    OpenAIRE

    Peter M. Scheifele; Johnson, Michael T.; Byrne, David C.; Clark, John G.; Ashley Vandlik; Kretschmer, Laura W.; Kristine E Sonstrom

    2012-01-01

    This study was designed to measure the sound output of four commonly used brands of forced-air dryers used by dog groomers in the United States. Many dog groomers have questions about the effect of this exposure on their hearing, as well as on the hearing of the dogs that are being groomed. Readings taken from each dryer at 1 meter (the likely distance of the dryer from the groomer and the dog) showed average levels ranging from 105.5 to 108.3 dB SPL or 94.8 to 108.0 dBA. Using the 90 dBA cri...

  20. Why social network analysis is important to Air Force applications

    Science.gov (United States)

    Havig, Paul R.; McIntire, John P.; Geiselman, Eric; Mohd-Zaid, Fairul

    2012-06-01

    Social network analysis is a powerful tool used to help analysts discover relationships amongst groups of people as well as individuals. It is the mathematics behind such social networks as Facebook and MySpace. These networks alone cause a huge amount of data to be generated and the issue is only compounded once one adds in other electronic media such as e-mails and twitter. In this paper we outline the basics of social network analysis and how it may be used in current and future Air Force applications.

  1. 75 FR 45091 - Notice of Request for Nominations to the Agricultural Air Quality Task Force

    Science.gov (United States)

    2010-08-02

    ... Task Force AGENCY: Natural Resources Conservation Service, United States Department of Agriculture... the Agricultural Air Quality Task Force (AAQTF) and requests nominations for qualified persons to... Chief of the Natural Resources Conservation Service (NRCS) will establish a task force to...

  2. Rome Air Development Center Air Force technical objective document fiscal year 1987

    Science.gov (United States)

    1985-12-01

    This TOD describes the RADC technical programs in support of the Air Force Command, Control, Communications, and Intelligence (C3I) mission. The technical objectives have been aligned with the VANGUARD mission areas of Command, Control, and Communications (C3), Reconnaissance and Intelligence, Strategic Systems (Defense) and Technology as a means of focusing the RADC support of VANGUARD. This document is prepared to provide industry and universities with the midterm technical objectives in these areas.

  3. Space Nuclear Thermal Propulsion (SNTP) Air Force facility

    Science.gov (United States)

    Beck, David F.

    1993-01-01

    The Space Nuclear Thermal Propulsion (SNTP) Program is an initiative within the US Air Force to acquire and validate advanced technologies that could be used to sustain superior capabilities in the area or space nuclear propulsion. The SNTP Program has a specific objective of demonstrating the feasibility of the particle bed reactor (PBR) concept. The term PIPET refers to a project within the SNTP Program responsible for the design, development, construction, and operation of a test reactor facility, including all support systems, that is intended to resolve program technology issues and test goals. A nuclear test facility has been designed that meets SNTP Facility requirements. The design approach taken to meet SNTP requirements has resulted in a nuclear test facility that should encompass a wide range of nuclear thermal propulsion (NTP) test requirements that may be generated within other programs. The SNTP PIPET project is actively working with DOE and NASA to assess this possibility.

  4. 32 CFR 806.27 - Samples of Air Force FOIA processing documents.

    Science.gov (United States)

    2010-07-01

    ... review will require policy determinations from different Air Force elements; records describe law... 32 National Defense 6 2010-07-01 2010-07-01 false Samples of Air Force FOIA processing documents. 806.27 Section 806.27 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR...

  5. 77 FR 41165 - Notice of Meeting of the Agricultural Air Quality Task Force

    Science.gov (United States)

    2012-07-12

    ... Natural Resources Conservation Service Notice of Meeting of the Agricultural Air Quality Task Force AGENCY... Agriculture (USDA), Agricultural Air Quality Task Force (AAQTF) will meet to continue discussions on critical... for Task Force Anaerobic Digester Technologies Odor Management Technologies Committee Updates E....

  6. Small Satellites and the DARPA/Air Force Falcon Program

    Science.gov (United States)

    Weeks, David J.; Walker, Steven H.; Sackheim, Robert L.

    2004-01-01

    The FALCON ((Force Application and Launch from CONUS) program is a technology demonstration effort with three major components: a Small Launch Vehicle (SLV), a Common Aero Vehicle (CAV), and a Hypersonic Cruise Vehicle (HCV). Sponsored by DARPA and executed jointly by the United States Air Force and DARPA with NASA participation, the objectives are to develop and demonstrate technologies that will enable both near-term and far-term capability to execute time-critical, global reach missions. The focus of this paper is on the SLV as it relates to small satellites and the implications of lower cost to orbit for small satellites. The target recurring cost for placing 1000 pounds payloads into a circular reference orbit of 28.5 degrees at 100 nautical miles is $5,000,000 per launch. This includes range costs but not the payload or payload integration costs. In addition to the nominal 1000 pounds to LEO, FALCON is seeking delivery of a range of orbital payloads from 220 pounds to 2200 pounds to the reference orbit. Once placed on alert status, the SLV must be capable of launch within 24 hours.

  7. Starfleet Deferred: Project Orion in the 1962 Air Force Space Program

    Science.gov (United States)

    Ziarnick, B.

    Project Orion, the Cold War American program (1957-1965) studying nuclear pulse propulsion for space applications, has long interested space enthusiasts for what it was and what it might have been, but it has long been believed that neither the United States government nor the US Air Force took the program very seriously. However, recently declassified US Air Force documents shed more light on the classified history of Project Orion. Far from being ignored by Air Force leadership, through the efforts of the Strategic Air Command, Air Force leaders like General Curtis LeMay were convinced that Project Orion should be funded as a major weapons system. The high water mark of Project Orion was the 1962 Air Force Space Program proposal by the Air Force Chief of Staff to devote almost twenty percent of the Air Force space budget from 1962-1967 to Orion development before the program was cancelled by the civilian Secretary of the Air Force under pressure from the Department of Defense. This paper details the history of Project Orion in the 1962 Air Force Space Program proposal, and concludes with a few lessons learned for use by modern interstellar advocates.

  8. Interaction force microscopy based on quartz tuning fork force sensor

    Science.gov (United States)

    Qin, Yexian

    The ability to sense small changes in the interaction force between a scanning probe microscope (SPM) tip and a substrate requires cantilevers with a sharp mechanical resonance. A typical commercially available cantilever in air is characterized by a resonance with a Q factor of 100 ˜ 300. The low Q factor can be attributed to imperfections in the cantilever itself as well as damping effects of the surrounding air. To substantially increase the Q factor, novel concepts are required. For this reason, we have performed a systematic study of quartz tuning fork resonators for possible use with SPMs. We find that tuning fork resonators operating in air are characterized by Q factors in the order of 104, thereby greatly improving the SPM's ability to measure small shifts in the interaction force. By carefully attaching commercially available SPM tips to the tuning fork, it is possible to obtain SPM images using non-contact imaging techniques and analyze the tip-sample interactions. The assembly of uniform molecular monolayers on atomically flat substrates for molecular electronics applications has received widespread attention during the past ten years. Scanning probe techniques are often used to assess substrate topography, molecular ordering and electronic properties, yet little is known about the fundamental tip-molecule interaction. To address this issue we have built an Interaction Force Microscope using a quartz tuning fork to probe tip-molecular monolayer interactions using scanning probe microscopy. The high quality factor and stable resonant frequency of a quartz tuning fork allows accurate measurement of small shifts in the resonant frequency as the tip interacts with the substrate. To permit an accurate measure of surface interaction forces, the electrical and piezomechanical properties of a tuning fork have been calibrated using a fiber optical interferometer. In prior work [1], we have studied molecular layers formed from either 4-Trifluoro

  9. Distribution and mass loss of volatile organic compounds in the surficial aquifer at sites FT03, LF13, and WP14/LF15, Dover Air Force Base, Delaware, November 2000-February 2001

    Science.gov (United States)

    Barbaro, Jeffrey R.; Neupane, Pradumna P.

    2002-01-01

    Ground-water and surface-water sampling was conducted in the natural attenuation study area in the East Management Unit of Dover Air Force Base, Delaware to determine the distributions of volatile organic compounds in the vicinity of four sites?Fire Training Area Three, the Rubble Area Landfill, the Receiver Station Landfill, and the Liquid Waste Disposal Landfill. This work was done by the U.S. Geological Survey, in cooperation with the U.S. Air Force, as part of an ongoing assessment of the effectiveness of natural attenuation at these sites. The specific objectives of the study were to (1) determine the areal and vertical extent of the contaminant plumes and source areas, (2) measure volatile organic compound concentrations in ground-water discharge areas and in surface water under base-flow conditions, (3) evaluate the potential for off-site migration of the mapped plumes, and (4) estimate the amount of mass loss downgradient of the Liquid Waste Disposal and Receiver Station Landfills. A direct-push drill rig and previously installed multi-level piezometers were used to determine the three-dimensional distributions of volatile organic compounds in the 30?60-foot-thick surficial aquifer underlying the natural attenuation study area. A hand -driven mini-piezometer was used to collect ground-water samples in ground-water discharge areas. A total of 319 ground-water and 4 surface-water samples were collected from November 2000 to February 2001 and analyzed for chlorinated solvents and fuel hydrocarbons. The contaminant plumes migrating from Fire Training Area Three and the Rubble Area Landfill are approximately 500 feet and 800 feet, respectively, in length. These plumes consist predominantly of cis-1,2-dichloroethene, a daughter product, indicating that extensive dechlorination of tetrachloroethene and trichloroethene has occurred at these sites. With an approximate length of 2,200 feet, the plume migrating from the Receiver Station and Liquid Waste Disposal

  10. 基于事件的空军作战计划仿真%Air Force Operation Planning Simulation Based on Events

    Institute of Scientific and Technical Information of China (English)

    陈志新

    2011-01-01

    An event-based simulation model for airforee operation planning is proposed. Driven by events ,the system can realize the uncertain reasoning of an attack-defense operation plan and carry out its effect evaluation. Firstly, the construction method for an event-based planning simulation system is given. Then, the composition, main function, and key technologies of such systems are analyzed. Finally, the system can be used to evaluate the consistency between an operation plan and its anticipative result.%提出了一种基于事件的空军作战计划仿真模型,通过事件驱动,实现攻防作战计划不确定性推理及作战效果评估;给出了基于事件的计划仿真系统的构建方法;分析了该系统的主要功能、结构组成和关键技术。该系统可用于预测作战计划与作战预期结果间的吻合度,并对计划的顺利实施起到铺垫作用。

  11. 78 FR 68826 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-11-15

    ... accounting for the socio-cultural dimensions of force structure issues ranging from the fundamental relationship of the American people to their military and to sub-cultures within the Air Force. --How...

  12. Methods for Addressing Uncertainty and Variability to Characterize Potential Health Risk from Trichloroethylene-Contaminated Ground Water at Beale Air Force Base in California:Integration of Uncertainty and Variability in Pharmacokinetics and Dose-Response

    Energy Technology Data Exchange (ETDEWEB)

    Bogen, K T

    2001-05-24

    Traditional estimates of health risk are typically inflated, particularly if cancer is the dominant endpoint and there is fundamental uncertainty as to mechanism(s) of action. Risk is more realistically characterized if it accounts for joint uncertainty and interindividual variability within a systematic probabilistic framework to integrate the joint effects on risk of distributed parameters of all (linear as well as nonlinear) risk-extrapolation models involved. Such a framework was used to characterize risks to potential future residents posed by trichloroethylene (TCE) in ground water at an inactive landfill site on Beale Air Force Base in California. Variability and uncertainty were addressed in exposure-route-specific estimates of applied dose, in pharmacokinetically based estimates of route-specific metabolized fractions of absorbed TCE, and in corresponding biologically effective doses estimated under a genotoxic/linear (MA{sub G}) vs. a cytotoxic/nonlinear (MA{sub c}) mechanistic assumption for TCE-induced cancer. Increased risk conditional on effective dose was estimated under MA{sub G} based on seven rodent-bioassay data sets, and under MA{sub c} based on mouse hepatotoxicity data. Mean and upper-bound estimates of combined risk calculated by the unified approach were <10{sup -6} and 10{sup -4}, respectively, while corresponding estimates based on traditional deterministic methods were >10{sup -5} and 10{sup -4}, respectively. It was estimated that no TCE-related harm is likely to occur due to any plausible residential exposure scenario involving the site. The systematic probabilistic framework illustrated is particularly suited to characterizing risks that involve uncertain and/or diverse mechanisms of action.

  13. Methods for Addressing Uncertainty and Variability to Characterize Potential Health Risk From Trichloroethylene-Contaminated Ground Water Beale Air Force Base in California: Integration of Uncertainty and Variability in Pharmacokinetics and Dose-Response

    Energy Technology Data Exchange (ETDEWEB)

    Bogen, K.T.

    1999-09-29

    Traditional estimates of health risk are typically inflated, particularly if cancer is the dominant endpoint and there is fundamental uncertainty as to mechanism(s) of action. Risk is more realistically characterized if it accounts for joint uncertainty and interindividual variability after applying a unified probabilistic approach to the distributed parameters of all (linear as well as nonlinear) risk-extrapolation models involved. Such an approach was applied to characterize risks to potential future residents posed by trichloroethylene (TCE) in ground water at an inactive landfill site on Beale Air Force Base in California. Variability and uncertainty were addressed in exposure-route-specific estimates of applied dose, in pharmacokinetically based estimates of route-specific metabolized fractions of absorbed TCE, and in corresponding biologically effective doses estimated under a genotoxic/linear (MA{sub g}) vs. a cytotoxic/nonlinear (MA{sub c}) mechanistic assumption for TCE-induced cancer. Increased risk conditional on effective dose was estimated under MA{sub G} based on seven rodent-bioassay data sets, and under MA, based on mouse hepatotoxicity data. Mean and upper-bound estimates of combined risk calculated by the unified approach were <10{sup -6} and <10{sup -4}, respectively, while corresponding estimates based on traditional deterministic methods were >10{sup -5} and >10{sup -4}, respectively. It was estimated that no TCE-related harm is likely occur due any plausible residential exposure scenario involving the site. The unified approach illustrated is particularly suited to characterizing risks that involve uncertain and/or diverse mechanisms of action.

  14. Cantilever based optical interfacial force microscope

    Science.gov (United States)

    Bonander, Jeremy R.; Kim, Byung I.

    2008-03-01

    We developed a cantilever based optical interfacial force microscopy (COIFM) that employs a microactuated silicon cantilever and optical detection method to establish the measurement of the single molecular interactions using the force feedback technique. Through the direct measurement of the COIFM force-distance curves, we have demonstrated that the COIFM is capable of unveiling structural and mechanical information on interfacial water at the single molecular level over all distances between two hydrophilic surfaces.

  15. 75 FR 48929 - Notice of Meeting of the Agricultural Air Quality Task Force

    Science.gov (United States)

    2010-08-12

    ... Natural Resources Conservation Service Notice of Meeting of the Agricultural Air Quality Task Force AGENCY...; (919) 541-5400. The Agricultural Air Quality Task Force (AAQTF) will meet to continue discussions on... Register of July 28, 2010, Notice of a Meeting (75 FR 44214). This document corrects the location of...

  16. Personal Value Systems and Career Objectives of Men vis-a-vis Women Air Force Officers.

    Science.gov (United States)

    Bartholomew, Charles W.

    Basic objectives of this research were to compare the personal values and career objectives of Air Force women to Air Force men. The research used a personal values questionnaire to establish which values and objectives were most likely to be translated into behavior. Values and objectives of 307 women officers and a control sample of 323 men were…

  17. The Air Force Officer Qualifying Test: Validity, Fairness, and Bias. Technical Report

    Science.gov (United States)

    Hardison, Chaitra M.; Sims, Carra S.; Wong, Eunice C.

    2010-01-01

    The Air Force has long recognized the importance of selecting the most qualified officers possible. For more than 60 years, it has relied on the Air Force Officer Qualifying Test (AFOQT) as one measure of those qualifications. A variety of concerns have been raised about whether the AFOQT is biased, too expensive, or even valid for predicting…

  18. Air Force Institute of Technology, Civil Engineering School: Environmental Protection Course.

    Science.gov (United States)

    Air Force Inst. of Tech., Wright-Patterson AFB, OH. School of Engineering.

    This document contains information assembled by the Civil Engineering School to meet the initial requirements of NEPA 1969 and Executive Orders which required the Air Force to implement an effective environmental protection program. This course presents the various aspects of Air Force environmental protection problems which military personnel…

  19. 75 FR 22560 - Federal Advisory Committee; U.S. Air Force Scientific Advisory Board; Charter Renewal

    Science.gov (United States)

    2010-04-29

    ... of the Secretary Federal Advisory Committee; U.S. Air Force Scientific Advisory Board; Charter... that it is renewing the charter for the U.S. Air Force Scientific Advisory Board (hereafter referred to as the Board). FOR FURTHER INFORMATION CONTACT: Jim Freeman, Deputy Advisory Committee...

  20. 78 FR 75334 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-12-11

    ... advantages and disadvantages of contending approaches to the future structure of the U.S. Air Force; (2... emerging findings, and a more credible basis for their recommendations. Three teams will be formed and each... National Guard. One team will be instructed to develop a future U.S. Air Force with 65% Active...

  1. 78 FR 17185 - U.S. Air Force Space Command Notice of Test

    Science.gov (United States)

    2013-03-20

    ..._Plan_Comments.pdf ) consistent with the GPS public ICWG process. Any military or civil users who..., Department of the Air Force, DoD. ACTION: GPS Test Notice. SUMMARY: The purpose of this notification is to inform users of an upcoming event related to the GPS satellite constellation. U.S. Air Force...

  2. 32 CFR 644.415 - Army military and Air Force lands-$50,000 limitation.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Army military and Air Force lands-$50,000 limitation. 644.415 Section 644.415 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Interests § 644.415 Army military and Air Force lands—$50,000 limitation. (a) 10 U.S.C. 2672 authorizes...

  3. 78 FR 61343 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-10-03

    ... of the Secretary Meeting of the National Commission on the Structure of the Air Force AGENCY... Commission on the Structure of the Air Force (``the Commission'') will take place. DATES: Date of Open..., Crystal City, VA 22202. FOR FURTHER INFORMATION CONTACT: Mrs. Marcia Moore, Designated Federal...

  4. 78 FR 58525 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-09-24

    ... of the Secretary Meeting of the National Commission on the Structure of the Air Force AGENCY... closed meeting of the National Commission on the Structure of the Air Force (``the Commission'') will..., September 26, 2013, from 1:00 p.m. to 5:00 p.m. ADDRESSES: 2521 South Clark Street, Suite 525, Crystal...

  5. 78 FR 37798 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-06-24

    ... of the Secretary Meeting of the National Commission on the Structure of the Air Force AGENCY... National Commission on the Structure of the Air Force (``the Commission'') will take place. DATES: Date of...:00 p.m. ADDRESSES: 2521 South Clark Street, Suite 525, Crystal City, VA 22202. FOR...

  6. 78 FR 36751 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-06-19

    ... of the Secretary Meeting of the National Commission on the Structure of the Air Force AGENCY... National Commission on the Structure of the Air Force (``the Commission'') will take place. DATES: Date of... 5:00 p.m. ADDRESSES: 2521 South Clark Street, Suite 200, Crystal City, VA 22202. FOR...

  7. 78 FR 32634 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-05-31

    ... of the Secretary Meeting of the National Commission on the Structure of the Air Force AGENCY... the National Commission on the Structure of the Air Force (``the Commission''), to include a closed... Street, Suite 525, Crystal City, VA 22202. Address of Open Meeting: Rayburn House Office Building,...

  8. Annotated Bibliography of the Air Force Human Resources Laboratory Technical Reports--1976.

    Science.gov (United States)

    Barlow, Esther M., Comp.

    This annotated bibliography presents a listing of technical reports (1976) dealing with personnel and training research conducted by the Air Force Human Resources Laboratory, an institution charged with the planning and execution of United States Air Force exploratory and advanced development programs for selection, motivation, training,…

  9. Residential Forced Air System Cabinet Leakage and Blower Performance

    OpenAIRE

    Walker, Iain S.

    2010-01-01

    This project evaluated the air leakage and electric power consumption of Residential HVAC components, with a particular focus on air leakage of furnace cabinets. Laboratory testing of HVAC components indicated that air leakage can be significant and highly variable from unit to unit ? indicating the need for a standard test method and specifying maximum allowable air leakage in California State energy codes. To further this effort, this project provided technical assistance for the developm...

  10. A decade of U.S. Air Force bat strikes

    Science.gov (United States)

    Peurach, Suzanne C.; Dove, Carla J.; Stepko, Laura

    2009-01-01

    From 1997 through 2007, 821 bat strikes were reported to the U.S. Air Force (USAF) Safety Center by aircraft personnel or ground crew and sent to the National Museum of Natural History, Smithsonian Institution, for identification. Many samples were identified by macroscopic and or microscopic comparisons with bat specimens housed in the museum and augmented during the last 2 years by DNA analysis. Bat remains from USAF strikes during this period were received at the museum from 40 states in the United States and from 20 countries. We confirmed that 46% of the strikes were caused by bats, but we did not identify them further; we identified 5% only to the family or genus level, and 49% to the species level. Fifty-five of the 101 bat-strike samples submitted for DNA analysis have been identified to the species level. Twenty-five bat species have been recorded striking USAF planes worldwide. The Brazilian free-tailed bat (Tadarida brasiliensis; n = 173) is the species most commonly identified in USAF strike impacts, followed by the red bat (Lasiurus borealis; n = 83). Bat strikes peak during the spring and fall, with >57% occurring from August through October; 82% of the reports that included time of strike were recorded between 2100 and 0900 hours. More than 12% of the bat strikes were reported at >300 m above ground level (AGL). Although bat-strike reports indicated damage to USAF aircraft, cumulative damage for 1997 through 2007 totaled >$825,000 and >50% of this sum was attributable to 5 bat-strike incidents. Only 5 bats from the 10 most damaging bat strikes were identified to the species level, either because we did not receive remains with the reports or the sample was insufficient for identification.

  11. Residential Forced Air System Cabinet Leakage and Blower Performance

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Iain S.; Dickerhoff, Darryl J.; Delp, William W.

    2010-03-01

    This project evaluated the air leakage and electric power consumption of Residential HVAC components, with a particular focus on air leakage of furnace cabinets. Laboratory testing of HVAC components indicated that air leakage can be significant and highly variable from unit to unit ? indicating the need for a standard test method and specifying maximum allowable air leakage in California State energy codes. To further this effort, this project provided technical assistance for the development of a national standard for Residential HVAC equipment air leakage. This standard is being developed by ASHRAE and is called"ASHRAE Standard 193P - Method of test for Determining the Air Leakage Rate of HVAC Equipment". The final part of this project evaluated techniques for measurement of furnace blower power consumption. A draft test procedure for power consumption was developed in collaboration with the Canadian General Standards Board: CSA 823"Performance Standard for air handlers in residential space conditioning systems".

  12. Reliable Force Predictions for a Flapping-wing Micro Air Vehicle : A "Vortex-lift" Approach

    NARCIS (Netherlands)

    Thielicke, W.; Kesel, A. B.; Stamhuis, Eize

    2011-01-01

    Vertical and horizontal force of a flapping-wing micro air vehicle (MAV) has been measured in slow-speed forward flight using a force balance. Detailed information on kinematics was used to estimate forces using a blade-element analysis. Input variables for this analysis are lift and drag coefficien

  13. Air Force Achieves Fuel Efficiency through Industry Best Practices

    Energy Technology Data Exchange (ETDEWEB)

    None

    2012-12-01

    The U.S. Air Force’s Air Mobility Command (AMC) is changing the way it does business. It is saving energy and money through an aircraft fleet fuel-efficiency program inspired by private industry best practices and ideas resulting from the empowered fuel savings culture.

  14. Force transducers based on the stress dependence of coercive force

    Science.gov (United States)

    Garshelis, I. J.

    1993-05-01

    An alternative measurement regime for magnetoelastic force transducers, based on variations in coercive field, is described. Hc is shown to be more directly related to the primary magnetic influence of stress, namely, the orientation of effective anisotropy, than conventionally used magnetization related parameters. The stress dependence of Hc is shown to generally reflect opposing factors associated with rotational and wall displacement magnetization reversal processes. In materials wherein Hc≪K/Ms wall motion dominates and if the product of λs/K and yield stress is high enough, large monotonic reductions of Hc with positive (tensile) stress are shown to be possible. A more complex variation of Hc with increasing compression is similarly expected. Experimental results from a transducer having an 18% Ni maraging steel core support these expectations.

  15. Supplemental site inspection for Air Force Plant 59, Johnson City, New York, Volume 1: Investigation report

    Energy Technology Data Exchange (ETDEWEB)

    Nashold, B.; Rosenblatt, D.; Hau, J. [and others

    1995-08-01

    This summary describes a Supplemental Site Inspection (SSI) conducted by Argonne National Laboratory (ANL) at Air Force Plant 59 (AFP 59) in Johnson City, New York. All required data pertaining to this project were entered by ANL into the Air Force-wide Installation Restoration Program Information System (IRPIMS) computer format and submitted to an appropriate authority. The work was sponsored by the United States Air Force as part of its Installation Restoration Program (IRP). Previous studies had revealed the presence of contaminants at the site and identified several potential contaminant sources. Argonne`s study was conducted to answer questions raised by earlier investigations.

  16. (?) The Air Force Geophysics Laboratory: Aeronomy, aerospace instrumentation, space physics, meteorology, terrestrial sciences and optical physics

    Science.gov (United States)

    McGinty, A. B.

    1982-04-01

    Contents: The Air Force Geophysics Laboratory; Aeronomy Division--Upper Atmosphere Composition, Middle Atmosphere Effects, Atmospheric UV Radiation, Satellite Accelerometer Density Measurement, Theoretical Density Studies, Chemical Transport Models, Turbulence and Forcing Functions, Atmospheric Ion Chemistry, Energy Budget Campaign, Kwajalein Reference Atmospheres, 1979, Satellite Studies of the Neutral Atmosphere, Satellite Studies of the Ionosphere, Aerospace Instrumentation Division--Sounding Rocket Program, Satellite Support, Rocket and Satellite Instrumentation; Space Physics Division--Solar Research, Solar Radio Research, Environmental Effects on Space Systems, Solar Proton Event Studies, Defense Meteorological Satellite Program, Ionospheric Effects Research, Spacecraft Charging Technology; Meteorology Division--Cloud Physics, Ground-Based Remote-Sensing Techniques, Mesoscale Observing and Forecasting, Design Climatology, Aircraft Icing Program, Atmospheric Dynamics; Terrestrial Sciences Division--Geodesy and Gravity, Geokinetics; Optical Physics Division--Atmospheric Transmission, Remote Sensing, INfrared Background; and Appendices.

  17. Simplified model for a ventilated glass window under forced air flow conditions

    Energy Technology Data Exchange (ETDEWEB)

    Ismail, K.A.R. [Depto. de Engenharia Termica e de Fluidos-FEM-UNICAMP CP: 6122 CEP 13083-970 Campinas, SP (Brazil); Henriquez, J.R. [Depto. de Eng. Mecanica-DEMEC, UFPE Av. Academico Helio Ramos, S/N CEP 50740-530, Recife, PE (Brazil)

    2006-02-01

    This paper presents a study on a ventilated window composed of two glass sheets separated by a spacing through which air is forced to flow. The proposed model is one dimensional and unsteady based upon global energy balance over the glass sheets and the flowing fluid. The external glass sheet of the cavity is subjected to variable heat flow due to the solar radiation as well as variable external ambient temperature. The exchange of radiation energy (infrared radiation) between the glass sheets is also included in the formulation. Effects of the spacing between the glass sheets, variation of the forced mass flow rate on the total heat gain and the shading coefficients are investigated. The results show that the effect of the increase of the mass flow rate is found to reduce the mean solar heat gain and the shading coefficients while the increase of the fluid entry temperature is found to deteriorate the window thermal performance. (author)

  18. Simplified model for a ventilated glass window under forced air flow conditions

    International Nuclear Information System (INIS)

    This paper presents a study on a ventilated window composed of two glass sheets separated by a spacing through which air is forced to flow. The proposed model is one dimensional and unsteady based upon global energy balance over the glass sheets and the flowing fluid. The external glass sheet of the cavity is subjected to variable heat flow due to the solar radiation as well as variable external ambient temperature. The exchange of radiation energy (infrared radiation) between the glass sheets is also included in the formulation. Effects of the spacing between the glass sheets, variation of the forced mass flow rate on the total heat gain and the shading coefficients are investigated. The results show that the effect of the increase of the mass flow rate is found to reduce the mean solar heat gain and the shading coefficients while the increase of the fluid entry temperature is found to deteriorate the window thermal performance

  19. A nanonewton force facility and a novel method for measurements of the air and vacuum permittivity at zero frequencies

    Science.gov (United States)

    Nesterov, Vladimir

    2009-08-01

    A nanonewton force facility, based on a disk-pendulum with electrostatic stiffness reduction and electrostatic force compensation, for the measurement of horizontal forces in the range below 1 µN, is presented. It consists of a measuring system and an identical reference system. Recent experiments with the nanonewton force facility have achieved agreement between an electrostatic force and a gravitational force of 80 nN with an uncertainty of less than 3%. A novel method for measurements of the air (vacuum) permittivity at zero frequencies by means of the nanonewton force facility is presented. First measurements in air show a permittivity of the air ɛ ≈ 8.71 × 10-12 F m-1 with an uncertainty of 3%. From a theoretical analysis, it follows that this method can be used for the measurement of the vacuum permittivity ɛ0 at zero frequencies with a relative uncertainty of about 10-5. The precise measurement of the vacuum permittivity ɛ0 for an electrostatic field would be another test for the correctness of Maxwell's equations.

  20. Transfer of Air Force technical procurement bid set data to small businesses, using CALS and EDI: Test report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-08-15

    This report documents a test transfer of three Air Force technical procurement bid sets to one large and twelve small businesses, using the Department of Defense (DoD) Continuous Acquisition and Life-cycle Support (CALS) and ANSI ASC X12 Electronic Data Interchange (EDI) standards. The main goal of the test was to evaluate the effectiveness of using CALS technical data within the context of the DoD`s EDI-based standard approach to electronic commerce in procurement, with particular emphasis on receipt and use of the data by small contractors. Air Force procurement data was provided by the Sacramento Air Logistics Center at McClellan Air Force Base; the manufacturing participants were selected from among McClellan`s ``Blue Ribbon`` contractors, located throughout the US. The test was sponsored by the Air Force CALS Test Network, headquartered at Wright-Patterson Air Force Base. The test successfully demonstrated the technical feasibility of including CALS MIL-R-28002 (Raster) engineering data in an EDI Specification/Technical Information transaction set (ANSI ASC X12 841) when issuing electronic requests for quotation to small businesses. In many cases, the data was complete enough for the contractor participant to feel comfortable generating a quote. Lessons learned from the test are being fed back to the CALS and EDI standards organizations, and to future implementors of CALS-EDI based acquisition or contracting systems, which require the transfer of technical information, such as engineering data, manufacturing process data, quality test data, and other product or process data, in the form of a CALS or other digital datafile.

  1. Treatment of Radioactive Liquid Waste by the Forced-Air Circulation System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Taekuk; Kang, Ilsik; Shon, Jongsik; Ryu, Younggerl; Jang, Wonhyuk; Bae, Sangmin; Ji, Youngyong; Hong, Daeseok; Kwak, Kyungkil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2011-07-01

    The evaporation rate is the difference between air speed and vapor pressure. The difference in vapor pressure confirms the relationship between air humidity and liquid temperature. This study showed that the evaporation rate increased, and that when the humidity of air inflow is low, the speed of the air, temperature, and flux of the liquid waste also increases. As to the relative humidity of the supplied air, the evaporation rate increases as the relative humidity decreases. Data were collected for humidity, temperature, and air velocity according to Dalton's evaporation equation. This facility is a natural evaporation type with a forced exhaust having a vertical array of cloth as an evaporation bank. Synthetic textile was used as an evaporation medium with a forced air circulation system that brought air from the outside. In this system, liquid effluent flows down the vertical array, having a total area of 11,250m{sup 2}. The intake of outdoor air through the air filter arises and flows into the bottom of the vertical array through exhaust fans at the top of the facility, contacting with the liquid stream counter currently, we investigated the influence of climate condition on the amount of evaporation in a Forced-Air Circulation System. We determined the range of atmospheric conditions using regional atmospheric data for the optimum operation of the facility.

  2. Treatment of Radioactive Liquid Waste by the Forced-Air Circulation System

    International Nuclear Information System (INIS)

    The evaporation rate is the difference between air speed and vapor pressure. The difference in vapor pressure confirms the relationship between air humidity and liquid temperature. This study showed that the evaporation rate increased, and that when the humidity of air inflow is low, the speed of the air, temperature, and flux of the liquid waste also increases. As to the relative humidity of the supplied air, the evaporation rate increases as the relative humidity decreases. Data were collected for humidity, temperature, and air velocity according to Dalton's evaporation equation. This facility is a natural evaporation type with a forced exhaust having a vertical array of cloth as an evaporation bank. Synthetic textile was used as an evaporation medium with a forced air circulation system that brought air from the outside. In this system, liquid effluent flows down the vertical array, having a total area of 11,250m2. The intake of outdoor air through the air filter arises and flows into the bottom of the vertical array through exhaust fans at the top of the facility, contacting with the liquid stream counter currently, we investigated the influence of climate condition on the amount of evaporation in a Forced-Air Circulation System. We determined the range of atmospheric conditions using regional atmospheric data for the optimum operation of the facility

  3. Report of Findings: Cold Bay Air Force Station (Grant Point) military contaminants: Fiscal year 1988 collections

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes our contaminants investigation at the abandoned Cold Bay Air Force Station (Station), located on the Izembek National Wildlife Refuge at...

  4. 77 FR 51526 - U.S. Air Force Scientific Advisory Board; Notice of Meeting

    Science.gov (United States)

    2012-08-24

    ... technology solution partnerships; and intelligence, surveillance, and reconnaissance needs for contested... FY13 Board schedule; the Air Force's science and technology needs with respect to space operations; Department of the Army acquisition and technology practices and lessons learned; latest perspectives...

  5. 76 FR 22083 - U.S. Air Force Academy Board of Visitors Notice of Meeting

    Science.gov (United States)

    2011-04-20

    ... Diversity; an Ethics briefing; and Air Force Academy fiscal issues in relation to the reduction of.... Supporting documentation may also be included as needed to establish the appropriate historical context...

  6. Air Force funded researcher engineers enzymes to advance the hydrogen economy

    OpenAIRE

    Trulove, Susan

    2007-01-01

    Y. H. Percival Zhang, assistant professor of biological systems engineering at Virginia Tech, has received an Air Force Young Investigator award to advance development of an onboard process to convert a cellulosic material into hydrogen to power fuel cell vehicles.

  7. 78 FR 59343 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-09-26

    ... Guard leadership who have been asked to testify and address the evaluation factors under consideration... components of the Air Force, taking advantage of the unique strengths and capabilities of each; (c)...

  8. AIR FORCE1不完全手册VOL.1

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    恰逢AIR FORCE1 25周年之际,鞋帮带您回顾25年间AIR FORCE1的点点滴滴。在这里,汇集了数百双25年来的经典鞋款,在今后的三期里,我们将会为您悉数呈现。

  9. Artificial Intelligence Research Capabilities of the Air Force Institute of Technology

    OpenAIRE

    Milne, Robert; Cross, Stephen

    1985-01-01

    The Air Force Institute of Technology (AFIT) provides master's degree education to Air Force and Army Officers in various engineering fields It is in a unique position to educate and perform research in the area of applications of artificial intelligence to military problems. Its two AI faculty members are the only military officers with PhD's in Artificial Intelligence. In the past two years, the artificial intelligence Laboratory of AFIT has become a major focal point for AI research and ap...

  10. Numerical Analysis of Magnetic Force of Dry-Type Air-Core Reactor

    Institute of Scientific and Technical Information of China (English)

    LIUZhi-gang; GENGYing-san; WANGJian-hua

    2004-01-01

    This paper presents a coupled magnetic-circuit method for computing the magnetic force of air-core reactor under short-time current. The current and the magnetic flux density are computed first and then the magnetic force is obtained. Thus, the dynamic stability performance of air-core reactor can be analyzed at the design stage to reduce experimental cost and shorten the lead-time of product development.

  11. Feasibility Study of Economics and Performance of Biopower at the Chanute Air Force Base in Rantoul, Illinois. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites

    Energy Technology Data Exchange (ETDEWEB)

    Scarlata, C.; Mosey, G.

    2013-05-01

    The U.S. Environmental Protection Agency (EPA), in accordance with the RE-Powering America's Land initiative, selected the Former Chanute Air Force Base site in Rantoul, Illinois, for a feasibility study of renewable energy production. The National Renewable Energy Laboratory (NREL) was contacted to provide technical assistance for this project. The purpose of this study was to assess the site for a possible biopower system installation and estimate the cost, performance, and impacts of different biopower options.

  12. Cape Canaveral Air Force Station integrated resource assessment. Volume 2, Baseline detail

    Energy Technology Data Exchange (ETDEWEB)

    Wahlstrom, R.R.; McMordie, K.L.; Parker, S.A.; King, D.A.; Sandusky, W.F.

    1993-12-01

    The US Air Force (USAF) has tasked the Pacific Northwest Laboratory (PNL), in support of the US Department of Energy (DOE) Federal Energy Management Program (FEMP), to assess energy use at Cape Canaveral Air Force Station (AFS). The information obtained from this assessment will be used in identifying energy resource opportunities to reduce overall energy consumption by the station. The primary focus of this report is to assess the current baseline energy consumption at Cape Canaveral AFS. It is A companion report to Volume 1, the Executive Summary, and Volume 3, the Resource Assessment. This assessment requires that information be obtained and characterized for buildings, utilities, energy sources, energy uses, and load profiles to be used to improve the current energy system on the station. The characteristics of electricity, diesel fuel, No. 2 fuel oil, and motor vehicle gasoline (MOGAS) are analyzed for on-base facilities. The assessment examines basic regional information used to determine energy-use intensity (EUI) values for Cape Canaveral AFS facilities by building, fuel type, and energy end use. It also provides a summary of electricity consumption from Florida Power and Light Company (FPL) metered data for 1985--1991. Load profile information obtained from FPL data is presented for the North, South, and Titan Substations for the four seasons of the year, including weekdays and weekends.

  13. Sonic booms produced by US Air Force and US Navy aircraft: Measured data

    Science.gov (United States)

    Lee, R. A.; Downing, J. M.

    1991-01-01

    A sonic measurement program was conducted at Edwards Air Force Base. Sonic boom signatures, produced by F-4, F-14, F-15, F-16, F-18, F-111, SR-71, and T-38 aircraft, were obtained under the flight track and at various lateral sites which were located up to 18 miles off-track. Thirteen monitors developed by Det 1 AL/BBE were used to collect full sonic boom waveforms, and nine modified dosimeters were used to collect supplemental peak overpressures and the C-weighted Sound Exposure Levels (CSEL) for 43 near steady supersonic flights of the above United States Air Force and United States Navy aircraft. This report describes the measured database (BOOMFILE) that contains sonic boom signatures and overpressures, aircraft tracking, and local weather data. These measured data highlight the major influences on sonic boom propagation and generation. The data from this study show that a constant offset of 26 from the peak overpressure expressed in dB gives a good estimate of the CSEL of a sonic boom.

  14. Study on forced air convection cooling for electronic assemblies

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The slotted fin concept was employed to improve the air cooling performance of plate-fin in heat sinks.Numerical simulations of laminar heat transfer and flow pressure drop were conducted for the integral plate fin,discrete plate fin and discrete slotted fin heat sinks.It is found that the performance of the discrete plate fin is better than that of the integral continuum plate fin and the performance of slotted fin is better than that of the discrete plate fin at the same pumping power of the fan.A new type of heat sink characterized by discrete and slotted fin surfaces with thinner fins and smaller spaces between fins is then proposed.Preliminary computation shows that this type of heat sink may be useful for the next generation of higher thermal load CPUs.The limit of cooling capacity for air-cooling techniques was also addressed.

  15. AIR FORCE 1二十五周年庆典

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    继AIDAS SUPERSTAR 35TH之后,NIKE AIR FORCE1 25周年对于体育潮流界来说是不能忽视的重要事件!以NIKE传奇设计师Bruce Kilgore为核心的创作团队也致力让NIKE AIR FORCE1在25周年之际让它更加放射光芒!NIKE AIR FORCE1 25周年不仅包含了纪念意义,也包含了NIKE对于业界的野心和期望。随后发表的一系列NIKE AF1 25周年别注将代表NIKE最高级设计和制作工艺。据悉,之后每款NIKE AIR FORCE别注都将拍摄特别短片!

  16. Avon Park Air Force Range project: distribution and abundance of sensitive wildlife species at Avone Park Force Range

    OpenAIRE

    Franz, Richard; Maehr, David; Kinlaw, Alton; O'Brien, Christopher; Owen, Richard D.

    1998-01-01

    Executive Summary. We surveyed for seven species ofsensitve wildlife (Florida gopher frogs, gopher tortoise, eastern indigo snake, eastern diamondback rattlesnake, Florida mouse, Florida roundtail muskrat, Sherman's fox squirrel) between October 1996 and May 1998 at Avon Park Air Force Range (APR). The presence of 87 other species ofamphibians, reptiles, and mammals also were detected. Selected species ofbirds were noted, particularly if they were found dead on APR roads. We re...

  17. Air Force School of Health Care Science's quality of life study.

    Science.gov (United States)

    Porter, R D; Buckingham, R S; Chitwood, J L; Carlsen, J S

    1998-01-01

    This was an empirically based assessment of non-prior service students' quality of life in the Air Force's School of Health Care Sciences. Analysis provided five results: (1) The overall quality of life at the school was good. (2) The variables accounting for student unhappiness were dormitory unsuitability and the students not being in their top-three career choices. (3) Structural changes were required at the dormitories. (4) The desire to succeed and how to achieve that success were the most important interests for students. (5) Loved ones and student independence were the greatest indicators of motivation. The findings resulted in three immediate corrections and two long-term recommendations to improve students' quality of life. The two long-term recommendations were to have an educational psychologist intervene when students are having significant learning problems, and to alter the selection process for recruiting. Both immediate corrections and long-term recommendations are useful for sister services. PMID:9465569

  18. The Digital Twin Paradigm for Future NASA and U.S. Air Force Vehicles

    Science.gov (United States)

    Glaessgen, Edward H.; Stargel, D. S.

    2012-01-01

    Future generations of NASA and U.S. Air Force vehicles will require lighter mass while being subjected to higher loads and more extreme service conditions over longer time periods than the present generation. Current approaches for certification, fleet management and sustainment are largely based on statistical distributions of material properties, heuristic design philosophies, physical testing and assumed similitude between testing and operational conditions and will likely be unable to address these extreme requirements. To address the shortcomings of conventional approaches, a fundamental paradigm shift is needed. This paradigm shift, the Digital Twin, integrates ultra-high fidelity simulation with the vehicle s on-board integrated vehicle health management system, maintenance history and all available historical and fleet data to mirror the life of its flying twin and enable unprecedented levels of safety and reliability.

  19. Experimental investigation on steam condensation in the presence of air and helium: forced convection conditions

    Energy Technology Data Exchange (ETDEWEB)

    Bucci, M., E-mail: matteo.bucci@cea.fr [Univ. of Pisa, DIMNP, Pisa (Italy); CEA Saclay, CEA/DEN/DANS/DM2S/SFME/LETR (France); Ambrosini, W.; Forgione, N. [Univ. of Pisa, DIMNP, Pisa (Italy); Lioce, D [Univ. of Pisa, DIMNP, Pisa (Italy); Westinghouse Electric Belguim, Nivelles (Belgium)

    2011-07-01

    This paper discusses the results obtained from recent experimental investigations devoted to the study of steam condensation in the presence of air and a light noncondensable gas. The experiments are intended to provide data for the validation of engineering models and CFD codes. The original experimental data herein discussed focus on forced convection turbulent boundary layer conditions and involve atmospheric pressure, different conditions for mixture velocity (from 1.5 to 3.5 m/s), mixture composition (form 0 to 75 per cent of the light species in the overall amount of noncondensable gases) and two nominal electrical power supply of the steam generator. The experimental data are qualified against correlations based on the heat and mass transfer analogy and to the predictions obtained by an in house condensation model implemented in a commercial CFD code. (author)

  20. Development and calibration of an air-floating six-axis force measurement platform using self-calibration

    Science.gov (United States)

    Huang, Bin; Wang, Xiaomeng; Li, Chengwei; Yi, Jiajing; Lu, Rongsheng; Tao, Jiayue

    2016-09-01

    This paper describes the design, working principle, as well as calibration of an air-floating six-axis force measurement platform, where the floating plate and nozzles were connected without contact, preventing inter-dimensional coupling and increasing precision significantly. The measurement repeatability error of the force size in the platform is less than 0.2% full scale (FS), which is significantly better than the precision of 1% FS in the six-axis force sensors on the current market. We overcame the difficulties of weight loading device in high-precision calibration by proposing a self-calibration method based on the floating plate gravity and met the calibration precision requirement of 0.02% FS. This study has general implications for the development and calibration of high-precision multi-axis force sensors. In particular, the air-floating six-axis force measurement platform could be applied to the calibration of some special sensors such as flexible tactile sensors and may be used as a micro-nano mechanical assembly platform for real-time assembly force testing.

  1. Application of the biological forced air soil treatment (BIOFAST trademark) technology to diesel contaminated soil

    International Nuclear Information System (INIS)

    A subsurface Biological Forced Air Soil Treatment (BIOFAST trademark) system was constructed at the Yellow Freight System, Inc. (Yellow Freight) New Haven facility in Connecticut as a means of expediting the remediation of soils impacted by a diesel fuel release. Prior to beginning construction activities the soils were evaluated for the feasibility of bioremediation based on soil characteristics including contaminant degrading bacteria, moisture content, and pH. Based on results of stimulant tests with oxygen and nutrients, the addition of fertilizer during the construction of the cell was recommended. Following the removal of underground storage tanks, the bioremediation cell was constructed by lining the enlarged excavation with high density polyethylene (HDPE) and backfilling alternating layers of nutrient-laden soil and pea gravel. Passive and active soil vapor extraction (SVE) piping was included in the gravel layers and connected to a blower and vapor treatment unit, operated intermittently to supply oxygen to the subsurface cell. Operating data have indicated that the bacteria are generating elevated levels of CO2, and the SVE unit is evacuating the accumulated CO2 from the soils and replacing it with fresh air. These data suggest that the bioremediation process is active in the soils. Soil samples collected from within the soil pit subsequent to installation and again after 10 months of operation indicate that TPH concentrations have decreased by as much as 50%

  2. Overview of the Diagnostic Cloud Forecast Model at the Air Force Weather Agency

    Science.gov (United States)

    Hildebrand, E. P.

    2014-12-01

    The Air Force Weather Agency (AFWA) is responsible for running and maintaining the Diagnostic Cloud Forecast (DCF) model to support DoD missions and those of their external partners. The DCF model generates three-dimensional cloud forecasts for global and regional domains at various resolutions. Regional domains are chosen based on Air Force mission needs. DCF is purely a statistical model that can be appended to any numerical weather prediction (NWP) model. Operationally, AFWA runs the DCF model deterministically using GFS data from NCEP and WRF data that are created in-house. In addition, AFWA also runs an ensemble version of the DCF model using the Mesoscale Ensemble Prediction System (MEPS). The deterministic DCF uses predictor variables from the WRF or GFS models, depending on whether the domain is regional or global, and statistically relates them to observed cloud cover from the World-Wide Merged Cloud Analysis (WWMCA). The forecast process of the model uses an ordinal logistic regression to predict membership in one of 101 groups (every 1% from 0-100%). The predicted group membership then is translated into a cloud amount. This is performed on 21 pressure levels ranging from 1000 hPa to 100 hPa. Cloud amount forecasts on these 21 levels are used along with the NWP geopotential height forecasts to estimate the base and top heights of cloud layers in the vertical. DCF also includes routines to estimate the amount and type of cloud within each layer. Forecasts of total cloud amount are verified using the WWMCA, as well as independent sources of cloud data. This presentation will include an overview of the DCF model and its use at AFWA. Results will be presented to show that DCF adds value over the raw cloud forecasts from NWP models. Ideas for future work also will be addressed.

  3. Changing the balance of power – Worldwide air force`s capability turbulences

    Directory of Open Access Journals (Sweden)

    Pavel NEČAS

    2012-03-01

    Full Text Available In past Century, the air power had undergone a significant journey. In its humble beginnings during WWI an airplane proved itself a perspective and highly capable new weapon. WWII demonstrated the importance of air superiority for waging a global warfare. The Cold War mastered technologies enabling air power to be not only a weapon a mass destruction but also a surgical tool. On one hand, an aircraft has become a state of art technology, yet on the other hand a cost for its development, procurement, and servicing grew into an astronomic levels. Therefore, since mid 1970s there have been trends to shift airpower from quantity into quality, which has gained a new moment with the end of the Cold War. Starting with the first Gulf War, in past two decades demonstrated a growing importance of a multirole fighter aircraft that is able to carry out a full specter of missions for minimal costs. When analyzing five most potent airpowers of the 21st century, we can witness that this is the trend is on and it will surely continue in future.

  4. Nike Air Force 1 Hi Hyperfuse Prm完美整合

    Institute of Scientific and Technical Information of China (English)

    铁铁

    2011-01-01

    耐克(Nike)推出新款Nike Air Force 1 Hi Hyperfuse Prm运动鞋,将三种不同的材料融于一体,达到轻盈、透气的运动效果。同时将外在的色彩与内在的优越相结合,以崭新的运动美感整合NIKE Air Force 1的招牌鞋型,

  5. Force measurements in positive unipolar wire-to-plane corona discharges in air

    CERN Document Server

    de Haan, V O

    2004-01-01

    Measurements of force generated by a positive unipolar wire-to-plane corona discharge in air are compared with numerical simulations. The generated force does not depend on the ion or electron mobilities, preventing the influence of uncertainty and variation of these parameters. A method is described to simulate the voltage and charge distribution for a wire-to-plane set-up. This method enables the determination of the transition between unipolar and bipolar discharges. In the experimental set-up breakdown electric field of air reduces with increasing discharge current.

  6. Mortality From Fungal Diseases in the US Air Force From 1970 to 2013.

    Science.gov (United States)

    Kugblenu, Richard K; Reeves, Will K

    2016-01-01

    We review a unique set of documents, death certificates, catalogued in the US Air Force Mortality Registry, which tracks deaths for current and retired Air Force service members. We screened the records for all deaths caused by fungal diseases between 1970 and 2013. There were 216 deaths caused by a variety of diseases such as aspergillosis, blastomycosis, candidiasis, coccidioidomycosis, cryptococcosis, histoplasmosis, mucormycosis, pneumocystosis, sporotrichosis, and zygomycosis. The single most common identified cause of death was opportunistic candidiasis. Of the total 216 deaths, only 7 were active duty or active reserve personnel. PMID:27613208

  7. Developing a model for assigning senior officers in the Brazilian Air Force

    OpenAIRE

    Gentil Toneli, Arthur A.

    2015-01-01

    Approved for public release; distribution is unlimited The Brazilian Air Force faces a huge challenge in the assignment process. While aviators outnumber any other community, there are few jobs related to aviation available for senior officers. As a consequence, when junior aviators who invested their time improving their skills in air operations are promoted to senior ranks, they must be assigned to managerial positions in areas they don’t master. The problem becomes worse in the absence ...

  8. Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies

    International Nuclear Information System (INIS)

    Highlights: • Three-dimensional CFD model with forced air cooling are developed for battery modules. • Impact of different air cooling strategies on module thermal characteristics are investigated. • Impact of different model structures on module thermal responses are investigated. • Effect of inter-cell spacing on cell thermal characteristics are also studied. • The optimal battery module structure and air cooling strategy is recommended. - Abstract: Thermal management needs to be carefully considered in the lithium-ion battery module design to guarantee the temperature of batteries in operation within a narrow optimal range. This article firstly explores the thermal performance of battery module under different cell arrangement structures, which includes: 1 × 24, 3 × 8 and 5 × 5 arrays rectangular arrangement, 19 cells hexagonal arrangement and 28 cells circular arrangement. In addition, air-cooling strategies are also investigated by installing the fans in the different locations of the battery module to improve the temperature uniformity. Factors that influence the cooling capability of forced air cooling are discussed based on the simulations. The three-dimensional computational fluid dynamics (CFD) method and lumped model of single cell have been applied in the simulation. The temperature distributions of batteries are quantitatively described based on different module patterns, fan locations as well as inter-cell distance, and the conclusions are arrived as follows: when the fan locates on top of the module, the best cooling performance is achieved; the most desired structure with forced air cooling is cubic arrangement concerning the cooling effect and cost, while hexagonal structure is optimal when focus on the space utilization of battery module. Besides, the optimized inter-cell distance in battery module structure has been recommended

  9. Cape Canaveral Air Force Station integrated resource assessment. Volume 3, Resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Sandusky, W.F.; Eichman, C.J.; King, D.A.; McMordie, K.L.; Parker, S.A.; Shankle, S.A.; Wahlstrom, R.R.

    1994-03-01

    The U.S. Air Force (USAF) has tasked the Pacific Northwest Laboratory (PNL) in support of the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP), to identify, evaluate, and assist in acquiring all cost-effective energy projects at Cape Canaveral Air Force Station (AFS). Projects considered can be either in the form of energy management or energy conservation. The overall efforts of this task are based on a model program PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at Cape Canaveral AFS, which is located approximately 10 miles north of Cocoa Beach, Florida. It is a companion report to Volume 1: Executive Summary and Volume 2: Baseline Detail. The results of the analyses of EROs are presented in 11 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative description of each ERO is provided, including information on the installed cost, energy and dollar savings, impacts on operations and maintenance (O&M), and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. Descriptions of the evaluation methodologies and technical and cost assumptions are also provided for each ERO. Summary tables present the cost- effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis, indicating the net present value (NPV) and savings-to-investment ratio (SIR) of each ERO.

  10. Stress and Job Satisfaction among Air Force Military Pilots

    Directory of Open Access Journals (Sweden)

    Khodabakhsh Ahmadi

    2007-01-01

    Full Text Available Stress induces impairment of performance is a relatively common issue in pilots of military aviation. The present study aimed at gathering preliminary data on the relationship between stress and job satisfaction among military pilots, so determine to what extent military pilots suffering from job satisfaction. This study was cross- sectional in design and used survey methodology. The survey was offered to 89 military pilots. Subjects completed a Questionnaire with 32-item on Aviation Stress and short form of Minnesota job Satisfaction Questionnaire (MSQ. Results indicated that %33.7 pilots who had mild stress, %48.3 pilots who exhibited moderate stress and only, %13.5 pilots who indicated high stress. The stresses in pilots rating so: life stress, organizational stress, flight environmental stress and task-based stress. The correlation between job satisfactions and life stress was (-0/53, with organizational stress (-0/38, with flight environmental stress (-0/25, with task-based stressors (-0/23 and finally correlation between job satisfaction with flying hours was (-0/22. At this time when our military pilots have the least flights and spend most of their time idly, having no schedule can increase their stress, as well. Therefore, it is essential to provide them with some training, informing, evaluating and other psychological services, especially life skills and organizational skills. Furthermore, attending to military pilots and filling their schedule with useful programs such as flight with civilian airplanes, educational and research activities, favorite executive activities, sports and entertainment can decrease their stress, increase their job satisfaction and decrease their occupational weariness.

  11. PHYTOREMEDIATION OF GROUNDWATER AT AIR FORCE PLANT 4, CARSWELL, TEXAS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    Over 600 Cottonwood trees were planted over a shallow groundwater plume in an attempt to detoxify the trichloroethylene (TCE) in a groundwater plume at a former Air Force facility. Two planting techniques were used: rooted stock about two years old, and 18 inch cuttings were inst...

  12. U.S. Air Force Office of Scientific Research awards physics professor

    OpenAIRE

    Doss, Catherine

    2007-01-01

    Giti Khodaparast of Blacksburg, assistant professor of physics in the College of Science at Virginia Tech, has been awarded $329,831 by the U.S. Air Force to study coherent phenomena and develop concepts for new device functionality using ferromagnetic semiconductors.

  13. 76 FR 18537 - U.S. Air Force Scientific Advisory Board; Notice of Meeting

    Science.gov (United States)

    2011-04-04

    ... subject of this notice. Due to internal DoD difficulties, beyond the control of the U.S. Air Force... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF DEFENSE... 41 CFR 102-3.150(a). Accordingly, the Advisory Committee Management Officer for the Department...

  14. The Costs and Consequences of Quality at the Air Force Academy: A Professor's Perspective.

    Science.gov (United States)

    Porter, David B.

    1994-01-01

    A professor at the Air Force Academy (Colorado) recounts that institution's 3 years of experience with total quality concepts. The model that guided initial quality education and training activities is described and evidence of progress reported. He concludes that the right kind of investment in quality is well worth the cost. (DB)

  15. Presentation to the Atomic Energy Commission and the Air Force, June 14, 1962

    Energy Technology Data Exchange (ETDEWEB)

    none

    1962-10-01

    This volume contains the charts and backup material presented to the Atomic Energy Commission and Air Force on June 14, 1962 concerning General Electric's Nuclear Materials and Propulsion Operation (formerly the Aircraft Nuclear Propulsion Department), during its work on the development of a nuclear power plant for manned aircraft.

  16. Engineering professor wins $100,000 Air Force Young Investigator Award

    OpenAIRE

    Mackay, Steven D.

    2008-01-01

    The U.S. Air Force Office of Scientific Research has awarded Shashank Priya, associate professor of mechanical engineering in the College of Engineering at Virginia Tech, a $100,000, three-year renewable grant to conduct basic research in the area of high-frequency electronic components, titled Domain Engineered Magnetoelectric Thin Films for High Sensitivity Resonant Magnetic Field Sensors.

  17. 78 FR 70540 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-11-26

    ... (``the Commission'') (78 FR 68826-68828, November 15, 2013). DATES: Dates of Closed Meeting, including... extend to accounting for the socio-cultural dimensions of force structure issues ranging from the fundamental relationship of the American people to their military and to sub-cultures within the Air...

  18. 78 FR 68425 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-11-14

    ... Street, Suite 525, Crystal City, VA 22202 and a secure video teleconferencing line. FOR FURTHER... structure of the Air Force. This discussion will be organized into three categories. The ``Away Game,'' will.... Commissioners will also explore the implications of rising demands and expectations for the ``Home Game''...

  19. Height anomalies in tappingmode atomic force microscopy in air caused by adhesion

    NARCIS (Netherlands)

    Noort, van S. John T.; Werf, van der Kees O.; Grooth, de Bart G.; Hulst, van Niek F.; Greve, Jan

    1997-01-01

    Height anomalies in tapping mode atomic force microscopy (AFM) in air are shown to be caused by adhesion. Depending o­n the damping of the oscillation the height of a sticking surface is reduced compared to less sticking surfaces. It is shown that the height artefacts result from a modulation of osc

  20. Annotated Bibliography of the Air Force Human Resources Laboratory Technical Reports--1979. Final Report.

    Science.gov (United States)

    Barlow, Esther M.

    This annotated bibliography presents summaries of 81 reports on personnel and training research conducted by the Air Force Human Resources Laboratory (AFHRL). Topics addressed include electronics, aeronautics, computers, mathematics, and operational research, as they relate to the selection, motivation, training, retention, education, utilization,…

  1. Contact resonance atomic force microscopy imaging in air and water using photothermal excitation

    Energy Technology Data Exchange (ETDEWEB)

    Kocun, Marta; Labuda, Aleksander; Gannepalli, Anil; Proksch, Roger, E-mail: Roger.Proksch@oxinst.com [Asylum Research, an Oxford Instruments Company, Santa Barbara, California 93117 (United States)

    2015-08-15

    Contact Resonance Force Microscopy (CR-FM) is a leading atomic force microscopy technique for measuring viscoelastic nano-mechanical properties. Conventional piezo-excited CR-FM measurements have been limited to imaging in air, since the “forest of peaks” frequency response associated with acoustic excitation methods effectively masks the true cantilever resonance. Using photothermal excitation results in clean contact, resonance spectra that closely match the ideal frequency response of the cantilever, allowing unambiguous and simple resonance frequency and quality factor measurements in air and liquids alike. This extends the capabilities of CR-FM to biologically relevant and other soft samples in liquid environments. We demonstrate CR-FM in air and water on both stiff silicon/titanium samples and softer polystyrene-polyethylene-polypropylene polymer samples with the quantitative moduli having very good agreement between expected and measured values.

  2. Atomic force microscopy-based shape analysis of heart mitochondria.

    Science.gov (United States)

    Lee, Gi-Ja; Park, Hun-Kuk

    2015-01-01

    Atomic force microscopy (AFM) has become an important medical and biological tool for the noninvasive imaging of cells and biomaterials in medical, biological, and biophysical research. The major advantages of AFM over conventional optical and electron microscopes for bio-imaging include the facts that no special coating is required and that imaging can be done in all environments-air, vacuum, or aqueous conditions. In addition, it can also precisely determine pico-nano Newton force interactions between the probe tip and the sample surface from force-distance curve measurements.It is widely known that mitochondrial swelling is one of the most important indicators of the opening of the mitochondrial permeability transition (MPT) pore. As mitochondrial swelling is an ultrastructural change, quantitative analysis of this change requires high-resolution microscopic methods such as AFM. Here, we describe the use of AFM-based shape analysis for the characterization of nanostructural changes in heart mitochondria resulting from myocardial ischemia-reperfusion injury. PMID:25634291

  3. Cleansing orthodontic brackets with air-powder polishing: effects on frictional force and degree of debris

    Science.gov (United States)

    Leite, Brisa dos Santos; Fagundes, Nathalia Carolina Fernandes; Aragón, Mônica Lídia Castro; Dias, Carmen Gilda Barroso Tavares; Normando, David

    2016-01-01

    ABSTRACT Introduction: Debris buildup on the bracket-wire interface can influence friction. Cleansing brackets with air-powder polishing can affect this process. Objective: The aim of this study was to evaluate the frictional force and amount of debris remaining on orthodontic brackets subjected to prophylaxis with air-powder polishing. Methods: Frictional force and debris buildup on the surface of 28 premolar brackets were evaluated after orthodontic treatment. In one hemiarch, each bracket was subjected to air-powder polishing (n = 14) for five seconds, while the contralateral hemiarch (n = 14) served as control. Mechanical friction tests were performed and images of the polished bracket surfaces and control surfaces were examined. Wilcoxon test was applied for comparative analysis between hemiarches at p < 0.05. Results: Brackets that had been cleaned with air-powder polishing showed lower friction (median = 1.27 N) when compared to the control surfaces (median = 4.52 N) (p < 0.01). Image analysis showed that the control group exhibited greater debris buildup (median = 2.0) compared with the group that received prophylaxis with air-powder polishing (median = 0.5) (p < 0.05). Conclusion: Cleansing orthodontic brackets with air-powder polishing significantly reduces debris buildup on the bracket surface while decreasing friction levels observed during sliding mechanics. PMID:27653265

  4. The impact of diurnal variations of air traffic on contrail radiative forcing

    Directory of Open Access Journals (Sweden)

    N. Stuber

    2007-06-01

    Full Text Available We combined high resolution aircraft flight data from the EU Fifth Framework Programme project AERO2k with analysis data from the ECMWF's integrated forecast system to calculate diurnally resolved 3-D contrail cover. We scaled the contrail cover in order to match observational data for the Bakan area (eastern-Atlantic/western-Europe.

    We found that less than 40% of the global distance travelled by aircraft is due to flights during local night time. Yet, due to the cancellation of shortwave and longwave effects during daytime, night time flights contribute a disproportional 60% to the global annual mean forcing. Under clear sky conditions the night flights contribute even more disproportionally at 76%. There are pronounced regional variations in night flying and the associated radiative forcing. Over parts of the North Atlantic flight corridor 75% of air traffic and 84% of the forcing occurs during local night, whereas only 35% of flights are during local night in South-East Asia, yet these contribute 68% of the radiative forcing. In general, regions with a significant local contrail radiative forcing are also regions for which night time flights amount to less than half of the daily total of flights. Therefore, neglecting diurnal variations in air traffic/contrail cover by assuming a diurnal mean contrail cover can over-estimate the global mean radiative forcing by up to 30%.

  5. Noncontact scanning force microscopy based on a modified tuning fork sensor

    Science.gov (United States)

    Göttlich, Hagen; Stark, Robert W.; Pedarnig, Johannes D.; Heckl, Wolfgang M.

    2000-08-01

    Distance control using a tuning fork setup for the detection of shear forces is a standard configuration in scanning near-field optical microscopy (SNOM). Based on this concept, a modified sensor was developed, where a standard silicon tip for atomic force microscopy (AFM) is attached to the front end of one prong of a 100 kHz quartz tuning fork oscillator. Comparison of force curves of a standard tapping-mode AFM cantilever, a conventional fiber tip SNOM sensor and the novel AFM tip shear force sensor demonstrate an enhanced stability and sensitivity of the new sensor. Due to the rigid sensor design the force curves of the AFM tip shear force sensor indicate a perfect noncontact behavior under normal conditions in air. Noncontact images show a comparable resolution to conventional force microscopy.

  6. Design guidelines for the forced-air cooling process of strawberries

    Energy Technology Data Exchange (ETDEWEB)

    Ferrua, M.J.; Singh, R.P. [Department of Biological and Agricultural Engineering, University of California, Davis, CA 95616 (United States)

    2009-12-15

    The complex structure of the package systems currently used by the strawberry industry has prevented an efficient design of the forced-air cooling process. In this study, we investigated the mechanisms through which different design parameters affect the rate and uniformity of cooling, using a previously validated computational fluid dynamics model. The results indicated that the vent area has a significant effect on the cooling rate, but not on its uniformity. A design that reduces bypassing will not necessarily increase the cooling rate, because there is less bypass air to cool down the air exiting from each clamshell, so that the air entering the next clamshell becomes warmer. Periodic airflow reversal improves the rate and homogeneity of the cooling process. (author)

  7. 33 CFR 334.640 - Gulf of Mexico south of Apalachee Bay, Fla.; Air Force rocket firing range.

    Science.gov (United States)

    2010-07-01

    ... Bay, Fla.; Air Force rocket firing range. 334.640 Section 334.640 Navigation and Navigable Waters... REGULATIONS § 334.640 Gulf of Mexico south of Apalachee Bay, Fla.; Air Force rocket firing range. (a) The... meanderings of the shore to the point of beginning. (b) The regulations. (1) The fact that aerial...

  8. Control of cooling processes with forced-air aimed at efficiency energetic and the cooling time of horticultural products

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Joao Carlos Teles Ribeiro da; Mederos, Barbara Janet Teruel [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola

    2008-07-01

    The application of cooling technologies for the conservation of horticultural products is one of the stages the Cold Chain. In Brazil particularly, as a country with tropical climate with average high temperature almost all year, the application of these technologies is very important because the shelf-life of fresh horticultural products, with quality that the market demands, is directly related to temperature. In particular, the systems of forced air cooling operate according to the flow of air predetermined in the project according to the quantity of product to cool. When actual conditions differ from considerations of the project, as to the quantity of product, a situation very common in agricultural properties and packing houses, the fan will continue providing the nominal flow rate, causing alteration of the cost-benefit relation of process. This project aims at the development of a micro-processing equipment (output current of 4 to 20 mA) to control the rotational speed of the motor of the fan systems, air forced through an inverter of frequency. The objective is development of a Man-Machine Interface, based on an algorithm, which, through the introduction of mass product data and the automatic acquisition of data from temperature of the product and the camera, is calculated the cooling time. The rotation of the engine fan will be amended automatically, to maintain air flow with a proper cost-benefit, in connection with the reduction of cooling time, energy consumption, for the increasing the shelf life of products. (author)

  9. A Physically Based Spatial Expansion Algorithm for Surface Air Temperature and Humidity

    Directory of Open Access Journals (Sweden)

    Hongbo Su

    2013-01-01

    Full Text Available An algorithm was developed to expand the surface air temperature and air humidity to a larger spatial domain, based on the fact that the variation of surface air temperature and air humidity is controlled jointly by the local turbulence and the horizontal advection. This study proposed an algorithm which considers the advective driving force outside the thermal balance system and the turbulent driving force and radiant driving force inside the thermal balance system. The surface air temperature is determined by a combination of the surface observations and the regional land surface temperature observed from a satellite. The average absolute difference of the algorithm is 0.65 degree and 0.31 mb, respectively, for surface air temperature and humidity expansion, which provides a promising approach to downscale the two surface meteorological variables.

  10. Research on the changes of the tidal force and the air temperature in the atmosphere of Lushan (China Ms7.0 earthquake

    Directory of Open Access Journals (Sweden)

    Ma Weiyu

    2015-01-01

    Full Text Available The cycle process of the tidal force of celestial body for Lushan M7.0 earthquake, occurred in Lushan county of Sichuan, China on April 20, 2013 was calculated. The earthquake occurred at the lowest point phase. It indicated that the type of seismogenic fault that the tide force acted on belonged to the thrust fault. According to the tidal cycle, the abnormal air temperature change was analyzed based on NCEP satellite data around the whole China before and after the earthquake. The result showed that the air temperature changed evidently with the tide force changing. In temporal, the change went through: initial air temperature rise → strength→ reaching abnormal peak→ gradually decline; in spatial, the abnormal area winded its way along the margin of the southern Qinghai-Tibet Plateau and went through: scattered→ conversion→ scattered procession. The procession was similar to the change procession of a rock breaking under the stress loading. This shows that the stress change of rock may cause the air temperature change in the atmosphere before and after earthquake. It indicated that the tidal force of celestial body could trigger the earthquake, when the tectonic stress reaches its critical broken point and the air temperature anomaly was proportional to the seismic tectonic stress change. It was useful to combine air temperature and tidal force in earthquake precursory.

  11. Atomic Force Microscopy Based Cell Shape Index

    Science.gov (United States)

    Adia-Nimuwa, Usienemfon; Mujdat Tiryaki, Volkan; Hartz, Steven; Xie, Kan; Ayres, Virginia

    2013-03-01

    Stellation is a measure of cell physiology and pathology for several cell groups including neural, liver and pancreatic cells. In the present work, we compare the results of a conventional two-dimensional shape index study of both atomic force microscopy (AFM) and fluorescent microscopy images with the results obtained using a new three-dimensional AFM-based shape index similar to sphericity index. The stellation of astrocytes is investigated on nanofibrillar scaffolds composed of electrospun polyamide nanofibers that has demonstrated promise for central nervous system (CNS) repair. Recent work by our group has given us the ability to clearly segment the cells from nanofibrillar scaffolds in AFM images. The clear-featured AFM images indicated that the astrocyte processes were longer than previously identified at 24h. It was furthermore shown that cell spreading could vary significantly as a function of environmental parameters, and that AFM images could record these variations. The new three-dimensional AFM-based shape index incorporates the new information: longer stellate processes and cell spreading. The support of NSF PHY-095776 is acknowledged.

  12. Air microjet system for non-contact force application and the actuation of micro-structures

    International Nuclear Information System (INIS)

    We demonstrate a non-contact technique to apply calibrated and localized forces in the micro-Newton to milli-Newton range using an air microjet. An electromagnetically actuated diaphragm controlled by a signal generator is used to generate the air microjet. With a nozzle diameter of 150 μm, the microjet diameter was maintained to a maximum of 1 mm at a distance of 5 mm from the nozzle. The force generated by the microjet was measured using a commercial force sensor to determine the velocity profile of the jet. Axial flow velocities of up to 25 m s−1 were obtained at distances as long as 6 mm. The microjet exerted a force up to 1 μN on a poly dimethyl siloxane (PDMS) micropillar (50 μm in diameter, 157 μm in height) and 415 μN on a PDMS membrane (3 mm in diameter, 28 μm thick). We also demonstrate that from a distance of 6 mm our microjet can exert a peak pressure of 187 Pa with a total force of about 84 μN on a flat surface with 8 V operating voltage. Out of the cleanroom fabrication and robust design make this system cost effective and durable. (technical note)

  13. Air microjet system for non-contact force application and the actuation of micro-structures

    Science.gov (United States)

    Khare, S. M.; Venkataraman, V.

    2016-01-01

    We demonstrate a non-contact technique to apply calibrated and localized forces in the micro-Newton to milli-Newton range using an air microjet. An electromagnetically actuated diaphragm controlled by a signal generator is used to generate the air microjet. With a nozzle diameter of 150 μm, the microjet diameter was maintained to a maximum of 1 mm at a distance of 5 mm from the nozzle. The force generated by the microjet was measured using a commercial force sensor to determine the velocity profile of the jet. Axial flow velocities of up to 25 m s-1 were obtained at distances as long as 6 mm. The microjet exerted a force up to 1 μN on a poly dimethyl siloxane (PDMS) micropillar (50 μm in diameter, 157 μm in height) and 415 μN on a PDMS membrane (3 mm in diameter, 28 μm thick). We also demonstrate that from a distance of 6 mm our microjet can exert a peak pressure of 187 Pa with a total force of about 84 μN on a flat surface with 8 V operating voltage. Out of the cleanroom fabrication and robust design make this system cost effective and durable.

  14. Forced Convective Air Cooling from Electronic Component Arrays in a Parallel Plate Channel

    Institute of Scientific and Technical Information of China (English)

    D.Y.Cai; Y.P.Gan; 等

    1994-01-01

    This paper discusses air forced convection heat transfer from inline protruding elements arranged in eight rows.The streamwise and spanwise spacings between elements were varied using a splitter plate that can be positioned at three different modular configurations.A set of empirical formulas was presented to correlate the experimental data for the design of air cooling systems.Arrays of componets with one odd-size module have been tested also.Experimental results show that blocks near the entrance and behind the odd-size module have improved performance compared with uniform arrangements.Accordingly,temperature sensitive components are suggested to be arranged in these locations.

  15. MR compatible strain gauge based force transducer

    NARCIS (Netherlands)

    van Duinen, Hiske; Post, Marijn; Vaartjes, Koen; Hoogduin, Hans; Zijdewind, Inge

    2007-01-01

    In order to evaluate brain activation during motor tasks accurately one must also measure output parameters such as muscle force or muscle activity. Especially in clinical situations where the force output can be compromised by changes at different levels of the motor system, it is essential to stan

  16. Lorentz Force Based Satellite Attitude Control

    Science.gov (United States)

    Giri, Dipak Kumar; Sinha, Manoranjan

    2016-07-01

    Since the inception of attitude control of a satellite, various active and passive control strategies have been developed. These include using thrusters, momentum wheels, control moment gyros and magnetic torquers. In this present work, a new technique named Lorentz force based Coulombic actuators for the active control is proposed. This method uses electrostatic charged shells, which interact with the time varying earth's magnetic field to establish a full three axes control of the satellite. It is shown that the proposed actuation mechanism is similar to a satellite actuated by magnetic coils except that the resultant magnetic moment vanishes under two different conditions. The equation for the required charges on the the Coulomb shells attached to the satellite body axes is derived, which is in turn used to find the available control torque for actuating the satellite along the orbit. Stability of the proposed system for very high initial angular velocity and exponential stability about the origin are proved for a proportional-differential control input. Simulations are carried out to show the efficacy of the proposed system for the attitude control of the earth-pointing satellite.

  17. Final integrated trip report: site visits to Area 50, Andersen Air Force Base, Guam National Wildlife Refuge, War in the Pacific National Historical Park, Guam, Rota and Saipan, CNMI, 2004-2005

    Science.gov (United States)

    Hess, Steven C.; Pratt, Linda W.

    2006-01-01

    supported the Mariana Gallinule (Gallinula chloropus guami), the Mariana Mallard (Anas platyrhynchos oustaleti), Mariana Fruit-Dove (Ptilinopus roseicapilla), White-throated Ground Dove (Gallicolumba xanthonura xanthonura), Mariana Crow (Corvus kubaryi), and the Nightingale Reed-warbler (Acrocephalus luscinia), all endemic to the Mariana Islands. Other regionally endemic endangered species include the Micronesian Megapode (Megapodius laperouse), and the Mariana Swiftlet (Aerodramus bartschi), now reduced to a small population on Guam. Likewise, the flora of Guam is unique, with 21percent of its native vascular plants endemic to the Mariana Islands. In limestone forests of Northern Guam, a number of tall forest tree species such as joga, Elaeocarpus joga (Elaeocarpaceae); pengua or Macaranga thompsonii (Euphorbiaceae); ifit or Intsia bijuga (Fabaceae); seeded breadfruit or Artocarpus marianensis (Moraceae); and umumu or Pisonia grandis (Nyctaginaceae) may be in decline as a result of herbivory by mammals. All show reduced regeneration and age distributions highly skewed towards older individuals. These species provided important habitat for some of Guam's endangered forest birds that remain in captivity such as the Mariana Crow, Guam Kingfisher, and Guam Rail. The recent high frequency of intense tropical storms and herbivory caused by large populations of feral pigs and Philippine sambar deer (Cervus mariannus), as well as invasive alien vines that may suppress tree regeneration, could be permanently altering the structure of regenerating forests and composition of important canopy species on secondary limestone substrates that were cleared and compacted during airfield construction from 1944 through the 1970s. Guam National Wildlife Refuge (GNWR) was established at Ritidian Point, after it was determined to be excess property by the U.S. Navy. Most of the refuge, about 9,087 hectares, is an 'overlay refuge' on lands administered by the U.S. Air Force and U.S. Navy

  18. An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

    Science.gov (United States)

    Sampson, Paul G.; Sny, Linda C.

    1992-01-01

    The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

  19. A Peak Wind Probability Forecast Tool for Kennedy Space Center and Cape Canaveral Air Force Station

    Science.gov (United States)

    Crawford, Winifred; Roeder, William

    2008-01-01

    This conference abstract describes the development of a peak wind forecast tool to assist forecasters in determining the probability of violating launch commit criteria (LCC) at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) in east-central Florida. The peak winds are an important forecast element for both the Space Shuttle and Expendable Launch Vehicle (ELV) programs. The LCC define specific peak wind thresholds for each launch operation that cannot be exceeded in order to ensure the safety of the vehicle. The 45th Weather Squadron (45 WS) has found that peak winds are a challenging parameter to forecast, particularly in the cool season months of October through April. Based on the importance of forecasting peak winds, the 45 WS tasked the Applied Meteorology Unit (AMU) to develop a short-range peak-wind forecast tool to assist in forecasting LCC violatioas.The tool will include climatologies of the 5-minute mean end peak winds by month, hour, and direction, and probability distributions of the peak winds as a function of the 5-minute mean wind speeds.

  20. In situ radiological surveying at the Double Tracks site, Nellis Air Force Range, Tonopah, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Riedhauser, S.R.; Tipton, W.J.

    1996-04-01

    A team from the Remote Sensing Laboratory conducted a series of in situ radiological measurements at the Double Tracks site on the Nellis Air Force Range just east of Goldfield, Nevada, during the periods of April 10-13 and June 5-9, 1995. The survey team measured the terrestrial gamma radiation at the site to determine the levels of natural and man-made radiation. This site includes the areas covered by previous surveys conducted from 1962 through 1993. The main purpose of the first expedition was to assess several new techniques for characterizing sites with dispersed plutonium. The two purposes of the second expedition were to characterize the distribution of transuranic contamination (primarily plutonium) at the site by measuring the gamma rays from americium-241 and to assess the performance of the two new detector platforms. Both of the new platforms performed well, and the characterization of the americium-241 activity at the site was completed. Several plots compare these ground-based system measurements and the 1993 aerial data. The agreement is good considering the systems are characterized and calibrated through independent means. During the April expedition, several methods for measuring the depth distribution of americium-241 in the field were conducted as a way of quickly and reliably obtaining depth profiles without the need to wait for laboratory analysis. Two of the methods were not very effective, but the results of the third method appear very promising.

  1. Direct numerical simulation of liquid sodium droplet combustion in forced convection air flow

    International Nuclear Information System (INIS)

    In case of sodium leakage in liquid metal fast breeder reactor, the liquid sodium comes out in droplet form from a pipe accompanied with ignition and combustion Combustion heat and reaction products might affect integrity of steel liners in piping rooms. A direct numerical simulation code, COMET, is developed to simulate the combustion of a liquid sodium droplet. The extended MAC method coupled with a higher-order upwind scheme is used to calculate reacting compressible flow. Multicomponent counter diffusion of chemical species, mass and energy transfer by sodium evaporation, and heat transfer by radiation and thermal conductivity are calculated coupling with the flow. Chemical reaction of sodium, oxygen and water vapor is calculated by using the equation-solving methods of equilibrium constants. Thermodynamic properties of the mixed gas are evaluated based on the molecular transport theories. By using COMET, the single droplet combustion of liquid sodium in forced convection air flow is numerically simulated. Spatial distributions such as combustion heat, temperature, pressure, and chemical species behaviors such as formation, decomposition and transport are analyzed and discussed. The change of the droplet diameter agrees closely with the d-square law that has been experimentally observed and theoretically derived. (author)

  2. Job satisfaction for male and female U.S. Air Force officers

    OpenAIRE

    Amundsen, Espen

    1987-01-01

    Approved for public release; distribution is unlimited This thesis investigated the relationship between job satisfaction and gender by examining factors considered to be determinants of job satisfaction among junior U.S. Air Force officers. The data used in this research were from the 1985 DoD Survey of Officers and Enlisted Personnel. Bivariate analysis, factor analysis and regression analysis were performed to determine the effect of gender on those factors considered to ...

  3. Forced-Air Warming Provides Better Control of Body Temperature in Porcine Surgical Patients

    Directory of Open Access Journals (Sweden)

    Brian T. Dent

    2016-09-01

    Full Text Available Background: Maintaining normothermia during porcine surgery is critical in ensuring subject welfare and recovery, reducing the risk of immune system compromise and surgical-site infection that can result from hypothermia. In humans, various methods of patient heating have been demonstrated to be useful, but less evaluation has been performed in techniques to prevent hypothermia perioperatively in pigs. Methods: We compared body temperature regulation during surgery before and after modification of the ambient temperature of the operating laboratories. Three different methods of heating were then compared; a standard circulating water mattress, a resistive fabric blanket, and a forced hot air system. The primary measure was percentage of temperature readings outside a specification range of 36.7–40.0 °C. Results: Tighter control of the ambient temperature while using a circulating water mattress reduced the occurrence of out-of-specification body temperature readings from 20.8% to 5.0%, with most of these the result of hypothermia. Use of a resistive fabric blanket further reduced out-of-specification readings to 1.5%, with a slight increase in the occurrence of hyperthermia. Use of a forced air system reduced out-of-specification readings to less 0.1%. Conclusions: Maintenance of normothermia perioperatively in pig can be improved by tightly controlling ambient temperatures. Use of a resistive blanket or a forced air system can lead to better control than a circulating water mattress, with the forced air system providing a faster response to temperature variations and less chance of hyperthermia.

  4. Investigation of heat exchanger inclination in forced-draught air-cooled heat exchangers

    OpenAIRE

    Kennedy, I.J.; Spence, S.W.T.; Spratt, G.R.; Early, J. M.

    2013-01-01

    The purpose of this study is to determine the influence of inclining the heat exchanger relative to the fan in a forced draught air-cooled heat exchanger. Since inclination increases plenum depth, the effect of inclination is also compared with increasing plenum depth without inclination. The experimental study shows that inclination improves thermal performance by only 0.5%, when compared with a baseline non-inclined case with a shallow plenum. Similarly, increasing plenum depth without incl...

  5. Orbital debris detection program highlights from the Air Force Maui Optical Station

    Science.gov (United States)

    Houchard, Jeff E.; Kervin, Paul W.; Africano, John L.; Kuo, Shiao D.; Medrano, Robert S.; Lambert, John V.

    1994-06-01

    The Air Force Maui Optical Station (AMOS) conducted searches, measurements, and analyses of the orbital debris environment for the Air Force Space Command and the Phillips Laboratory since May 1991 in support of the Air Force Orbital Debris Measurements Program. The objective of this program was to detect orbiting low earth objects not currently in the United States Space Command Space Surveillance Center catalog. Once objects were detected, further objectives were to track, catalog, and maintain those objects locally, to determine statistics on detected objects, and perform relevant analyses. AMOS has developed a prototype surveillance system for the detection and tracking of orbital debris. In addition to this surveillance activity, AMOS has also automated the post-processing videotape streak detection process and is automating the analysis process. Both the optical tracking of orbital debris and the automatic streak detection process were thought to be virtually impossible only a few years ago. The AMOS program employed wide field of view optical telescopes using the Maui Groundbased Electro-Optical Deep Space Surveillance site and AMOS narrow field of view tracking telescopes, both located at the Maui Space Surveillance Site.

  6. Innovative pollution prevention program at Air Force owned Raytheon operated facility incorporating Russian technology

    Energy Technology Data Exchange (ETDEWEB)

    Stallings, J.H.; Cepeda-Calderon, S.

    1999-07-01

    Air Force Plant 44 in Tucson, Arizona is owned by the Air Force and operated by Raytheon Missile Systems Company. A joint Air Force/Raytheon Pollution Prevention Team operates at AFP 44 with the ultimate goal to minimize or eliminate the use of hazardous substances. The team works together to uncover new technologies and methods that will replace chemicals used in the plant's missile manufacturing facilities. The program maximizes pollution prevention by first eliminating hazardous material use, then chemical recycling, next hazardous waste reduction and finally wastewater treatment and recycling. From fiscal years 1994 through 1997, nine pollution prevention projects have been implemented, totaling $2.6 million, with a payback averaging less than two years. A unique wastewater treatment method has been demonstrated as part of this program. This is electroflotation, a Russian technology which removes dispersed particles from liquid with gas bubbles obtained during water electrolysis. A unit was built in the US which successfully removed organic emulsions from wastewater. Operational units are planned for the removal of waste from waterfall paint booths. The pollution prevention joint team continues to be very active with two projects underway in FY 98 and two more funded for FY 99.

  7. FORCED-AIR WARMING AND FLUID WARMING MINIMIZE CORE HYPOTHERMIA DURING ABDOMINAL SURGERY

    Institute of Scientific and Technical Information of China (English)

    Jing Zhao; Ai-lun Luo; Li Xu; Yu-guang Huang

    2005-01-01

    Objective To evaluate the effect of intraoperative combined forced-air warming and fluid warming system on patient's core temperature, blood loss, transfusion demand, extubation time, and incidence of postoperative shivering.Methods Forty patients with American Society of Anesthesiologists physical status Ⅰ and Ⅱ, aged 18-70 years, scheduled for elective abdominal surgery were randomly assigned to receive intraoperative warming from a forced-air blanket and fluid warming system or conventional cotton blanket, 20 in each group. The core temperature was recorded every 20 minutes during the operation, as well as the blood loss, blood transfusion, extubation time, and incidence of postoperative shivering.Results The core temperature at the end of the surgery in the wanning group was significantly different from that in the control group (36.4±0.4C vs. 35.3±0.5°C, P<0.001). Application of intraoperative warming significantly shortened the time between the end of the surgery and extubation (P<0.01). Postoperative shivering occurred in 30% of the patients in the control group compared to no patient in the warming group (P <0.01).Conclusion Active warming with air-forced blanket and fluid warming system provides sufficient heat to prevent hypothermia during abdominal surgery.

  8. Cancer in US Air Force veterans not involved with spraying herbicides during the Vietnam War

    Energy Technology Data Exchange (ETDEWEB)

    Pavuk, M. [SpecPro, Inc. (United States); Michalek, J.; Ketchum, N. [Air Force Research Laboratory, San Antonio, TX (United States); Akhtar, F. [The START Center, San Antonio, TX (United States)

    2004-09-15

    The Air Force Health Study is a 20-year prospective study examining the health, mortality and reproductive outcomes in US Air Force veterans of Operation Ranch Hand who sprayed herbicides in Vietnam from 1962 to 1971. Comparison veterans flew or serviced C-130 transport aircraft in Southeast Asia (SEA) during the same time period but did not spray herbicides. They were stationed mostly in Taiwan, the Philippines, Guam, Japan, and Thailand and spent on average less than 30% of their SEA service in Vietnam. Comparison veterans also spent approximately 30% more time in SEA than Ranch Hand veterans. No increases in Ranch Hand cancer mortality and morbidity were found in earlier investigations, but a recent study contrasting cancer rates in Air Force veterans and in the general US (white male) population reported increases in cancer at all SEER sites, prostate cancer and melanoma in Ranch Hand veterans and cancer at all SEER sites and prostate cancer in Comparison veterans. Associations between dioxin exposure category and cancer were found after restriction to Ranch Hand veterans who served in SEA no more than 2 years and to those who spent all of their SEA service in Vietnam. Overall cancer incidence in the general population in countries of SEA is about half of that in the United States, but cancers of the oral cavity/nasopharynx and liver are more prevalent in this region. Here we examine in more detail whether years served in SEA had any effect on the risk of cancer among Comparison veterans.

  9. Pre-Feasibility Analysis of Pellet Manufacturing on the Former Loring Air Force Base Site. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites

    Energy Technology Data Exchange (ETDEWEB)

    Hunsberger, R.; Mosey, G.

    2014-04-01

    The U.S. Environmental Protection Agency (EPA) Office of Solid Waste and Emergency Response, in accordance with the RE-Powering America's Lands initiative, engaged the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) to conduct feasibility studies to assess the viability of developing renewable energy generating facilities on contaminated sites. This site, in Limestone, Maine -- formerly the location of the Loring Air Force Base but now owned by the Aroostook Band of Micmac -- was selected for the potential to produce heating pellets from woody feedstock. Biomass was chosen as the renewable energy resource to evaluate based on abundant woody-biomass resources available in the area. NREL also evaluates potential savings from converting existing Micmac property from oil-fired heating to pellet heating.

  10. Modeling the forced-air cooling process of fresh strawberry packages, Part I: Numerical model

    Energy Technology Data Exchange (ETDEWEB)

    Ferrua, M.J.; Singh, R.P. [Department of Biological and Agricultural Engineering, University of California at Davis, One Shields Avenue, Davis, CA 95616 (United States)

    2009-03-15

    A numerical analysis of the forced-air cooling process of retail packages of strawberries was performed by solving the conservation equations of mass, momentum and energy within the system. The results showed that the heterogeneity of the cooling process is largely influenced by the structure and design of the packaging system (individual clamshell packages and trays). On average 75 {+-} 2% of the total airflow forced through the system bypassed the clamshells, and 46 {+-} 5% of the flow rate forced through clamshells bypassed the strawberries. After 1 h of cooling, the average-fruit-temperature per clamshell ranged from 2.4 C to 8.3 C between the first and last clamshells along the main flow direction. Within these clamshells, the maximum differences in the volume-average temperature of individual fruits reached 3.5 C and 5.1 C, respectively. The results show the potential use of this numerical approach as a design tool to optimize the forced-air cooling process of horticultural products. (author)

  11. CFD model of air movement in ventilated façade: comparison between natural and forced air flow

    Directory of Open Access Journals (Sweden)

    Miguel Mora Pérez, Gonzalo López Patiño, P. Amparo López Jiménez

    2013-01-01

    Full Text Available This study describes computational fluid dynamics (CFD modeling of ventilated façade. Ventilated façades are normal façade but it has an extra channel between the concrete wall and the (double skin façade. Several studies found in the literature are carried out with CFD simulations about the behavior of the thermodynamic phenomena of the double skin façades systems. These studies conclude that the presence of the air gap in the ventilated façade affects the temperature in the building skin, causing a cooling effect, at least in low-rise buildings. One of the most important factors affecting the thermal effects of ventilated façades is the wind velocity. In this contribution, a CFD analysis applied on two different velocity assumptions for air movement in the air gap of a ventilated façade is presented. A comparison is proposed considering natural wind induced velocity with forced fan induced velocity in the gap. Finally, comparing temperatures in the building skin, the differences between both solutions are described determining that, related to the considered boundary conditions, there is a maximum height in which the thermal effect of the induced flow is significantly observed.

  12. Athermalization in atomic force microscope based force spectroscopy using matched microstructure coupling

    OpenAIRE

    Torun, H.; Finkler, O.; Degertekin, F. L.

    2009-01-01

    The authors describe a method for athermalization in atomic force microscope (AFM) based force spectroscopy applications using microstructures that thermomechanically match the AFM probes. The method uses a setup where the AFM probe is coupled with the matched structure and the displacements of both structures are read out simultaneously. The matched structure displaces with the AFM probe as temperature changes, thus the force applied to the sample can be kept constant without the need for a ...

  13. Stable optical trapping based on optical binding forces.

    Science.gov (United States)

    Grzegorczyk, Tomasz M; Kemp, Brandon A; Kong, Jin Au

    2006-03-24

    Various trapping configurations have been realized so far, either based on the scattering force or the gradient force. In this Letter, we propose a new trapping regime based on the equilibrium between a scattering force and optical binding forces only. The trap is realized from the interaction between a single plane wave and a series of fixed small particles, and is efficient at trapping multiple free particles. The effects are demonstrated analytically upon computing the exact scattering from a collection of cylindrical particles and calculating the Lorentz force on each free particle via the Maxwell stress tensor. PMID:16605823

  14. Final integrated trip report: site visits to Area 50, Andersen Air Force Base, Guam National Wildlife Refuge, War in the Pacific National Historical Park, Guam, Rota and Saipan, CNMI, 2004-2005

    Science.gov (United States)

    Hess, Steven C.; Pratt, Linda W.

    2006-01-01

    supported the Mariana Gallinule (Gallinula chloropus guami), the Mariana Mallard (Anas platyrhynchos oustaleti), Mariana Fruit-Dove (Ptilinopus roseicapilla), White-throated Ground Dove (Gallicolumba xanthonura xanthonura), Mariana Crow (Corvus kubaryi), and the Nightingale Reed-warbler (Acrocephalus luscinia), all endemic to the Mariana Islands. Other regionally endemic endangered species include the Micronesian Megapode (Megapodius laperouse), and the Mariana Swiftlet (Aerodramus bartschi), now reduced to a small population on Guam. Likewise, the flora of Guam is unique, with 21percent of its native vascular plants endemic to the Mariana Islands. In limestone forests of Northern Guam, a number of tall forest tree species such as joga, Elaeocarpus joga (Elaeocarpaceae); pengua or Macaranga thompsonii (Euphorbiaceae); ifit or Intsia bijuga (Fabaceae); seeded breadfruit or Artocarpus marianensis (Moraceae); and umumu or Pisonia grandis (Nyctaginaceae) may be in decline as a result of herbivory by mammals. All show reduced regeneration and age distributions highly skewed towards older individuals. These species provided important habitat for some of Guam's endangered forest birds that remain in captivity such as the Mariana Crow, Guam Kingfisher, and Guam Rail. The recent high frequency of intense tropical storms and herbivory caused by large populations of feral pigs and Philippine sambar deer (Cervus mariannus), as well as invasive alien vines that may suppress tree regeneration, could be permanently altering the structure of regenerating forests and composition of important canopy species on secondary limestone substrates that were cleared and compacted during airfield construction from 1944 through the 1970s. Guam National Wildlife Refuge (GNWR) was established at Ritidian Point, after it was determined to be excess property by the U.S. Navy. Most of the refuge, about 9,087 hectares, is an 'overlay refuge' on lands administered by the U.S. Air Force and U.S. Navy

  15. Forecasting Cool Season Daily Peak Winds at Kennedy Space Center and Cape Canaveral Air Force Station

    Science.gov (United States)

    Barrett, Joe, III; Short, David; Roeder, William

    2008-01-01

    The expected peak wind speed for the day is an important element in the daily 24-Hour and Weekly Planning Forecasts issued by the 45th Weather Squadron (45 WS) for planning operations at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The morning outlook for peak speeds also begins the warning decision process for gusts ^ 35 kt, ^ 50 kt, and ^ 60 kt from the surface to 300 ft. The 45 WS forecasters have indicated that peak wind speeds are a challenging parameter to forecast during the cool season (October-April). The 45 WS requested that the Applied Meteorology Unit (AMU) develop a tool to help them forecast the speed and timing of the daily peak and average wind, from the surface to 300 ft on KSC/CCAFS during the cool season. The tool must only use data available by 1200 UTC to support the issue time of the Planning Forecasts. Based on observations from the KSC/CCAFS wind tower network, surface observations from the Shuttle Landing Facility (SLF), and CCAFS upper-air soundings from the cool season months of October 2002 to February 2007, the AMU created multiple linear regression equations to predict the timing and speed of the daily peak wind speed, as well as the background average wind speed. Several possible predictors were evaluated, including persistence, the temperature inversion depth, strength, and wind speed at the top of the inversion, wind gust factor (ratio of peak wind speed to average wind speed), synoptic weather pattern, occurrence of precipitation at the SLF, and strongest wind in the lowest 3000 ft, 4000 ft, or 5000 ft. Six synoptic patterns were identified: 1) surface high near or over FL, 2) surface high north or east of FL, 3) surface high south or west of FL, 4) surface front approaching FL, 5) surface front across central FL, and 6) surface front across south FL. The following six predictors were selected: 1) inversion depth, 2) inversion strength, 3) wind gust factor, 4) synoptic weather pattern, 5) occurrence of

  16. Minimum Normal Force Principle Based Quantitive Optimizationof Clamping Forces for Thin Walled Part

    Institute of Scientific and Technical Information of China (English)

    ZHANG Fa-ping; SUN Hou-fang; SHAHID I.Butt

    2008-01-01

    Based on the stability criteria of workpiece-fixture system, quantitative optimization of clamping forces during precise machining process for thin walled part is studied considering the contact condition between wokpiece and locator, the contact mechanical model is achieved ,which is further been used to calculate the entire passive forces acting on the statically undetermined workpiece by means of the force screw theory as well as minimum norm force principle. Furthermore, a new methodology to optimize clamping forces is put forward, on the criteria of keeping the stability of workpiece during cutting process. By this way, the intensity of clamping forces is decreased dramatically, which will be most beneficial for improving the machining quality of thin-walled parts. Finally, a case study is used to support and validate the proposed model.

  17. Circuit Design of Surface Acoustic Wave Based Micro Force Sensor

    Directory of Open Access Journals (Sweden)

    Yuanyuan Li

    2014-01-01

    Full Text Available Pressure sensors are commonly used in industrial production and mechanical system. However, resistance strain, piezoresistive sensor, and ceramic capacitive pressure sensors possess limitations, especially in micro force measurement. A surface acoustic wave (SAW based micro force sensor is designed in this paper, which is based on the theories of wavelet transform, SAW detection, and pierce oscillator circuits. Using lithium niobate as the basal material, a mathematical model is established to analyze the frequency, and a peripheral circuit is designed to measure the micro force. The SAW based micro force sensor is tested to show the reasonable design of detection circuit and the stability of frequency and amplitude.

  18. Alcohol issues prior to training in the United States Air Force.

    Science.gov (United States)

    Derefinko, Karen J; Klesges, Robert C; Bursac, Zoran; Little, Melissa A; Hryshko-Mullen, Ann; Talcott, Gerald W

    2016-07-01

    The negative impact of alcohol is a significant concern to the US military given the costs associated with alcohol-related offenses. Despite considerable research in active duty personnel, relatively little is known about the current extent of alcohol use among incoming recruits. We examined the history of alcohol use and harmful patterns of alcohol consumption among recruits entering the United States Air Force (USAF; N=50,549) over the span of 4 years (2010-2014). Across all years, drinking rates reflected national average trends for those aged 18-24 (NIDA, 2014). However, when abstainers were excluded, those under 21 (n=10,568) reported an average of 18.4 drinks per week, whereas those age 21 and over (n=14,188) reported an average of 14.1 drinks per week, suggesting that for those who drink, those under 21 are exhibiting more risky drinking rates. Alcohol Use Disorders Identification Task (AUDIT) scores for drinkers reflected these same trends. For those under 21, 58% scored in risk categories of 2 or higher (risky drinking warranting attention), compared with 40% for those age 21 and over. These scores indicate that for recruits in the USAF, approximately half report alcohol use immediately prior to basic training, resulting in the inheritance of these potential alcohol related issues for those conducting training of these recruits. Based upon these numbers, brief alcohol interventions could have a potential positive impact on individuals in their initial training stages of the USAF to prevent these baseline issues from resulting in problems later in their military careers. PMID:26945450

  19. 77 FR 64493 - Office of the Secretary of the Air Force Acceptance of Group Application Under Public Law 95-202...

    Science.gov (United States)

    2012-10-22

    ... Department of the Air Force Office of the Secretary of the Air Force Acceptance of Group Application Under Public Law 95-202 and Department of Defense Directive (DODD) 1000.20 AGENCY: The United States Air Force, DOD. ACTION: Notice. SUMMARY: Under the provisions of Section 401, Public Law 95-202 and DoD...

  20. Linear thermal circulator based on Coriolis forces.

    Science.gov (United States)

    Li, Huanan; Kottos, Tsampikos

    2015-02-01

    We show that the presence of a Coriolis force in a rotating linear lattice imposes a nonreciprocal propagation of the phononic heat carriers. Using this effect we propose the concept of Coriolis linear thermal circulator which can control the circulation of a heat current. A simple model of three coupled harmonic masses on a rotating platform permits us to demonstrate giant circulating rectification effects for moderate values of the angular velocities of the platform.

  1. The metabolic syndrome and cardiovascular mortality in US Air Force veterans of the Vietnam War

    Energy Technology Data Exchange (ETDEWEB)

    Pavuk, M. [SpecPro, Inc. (United States); Michalek, J.; Jackson Jr., W.; Ketchum, N. [Air Force Research Laboratory (United States)

    2004-09-15

    The metabolic syndrome is a clustering of risk factors such as disturbed glucose and insulin metabolism, obesity and visceral adiposity, low HDL cholesterol, hypertension, and a systemic pro-inflammatory state. Its subsequent association with development of cardiovascular disease and type 2 diabetes makes it a major health care issue. The prevalence of the metabolic syndrome in the United States is roughly 25% for adults over 20 and up to 40% for those over 60 years old. Although the estimates on the prevalence differ and various criteria have been used in classification of metabolic syndrome, few seem to disagree that it has reached epidemic proportions. Two major definitions have been proposed by World Health Organization (WHO) and the National Cholesterol Education Program (NCEP) Adult Treatment Panel (ATP III). The exact definition of the syndrome and the importance of individual components in the etiology of the syndrome are still under intense investigation. The Air Force Health Study is a 25-year prospective study examining the health, mortality and reproductive outcomes in US Air Force veterans of Operation Ranch Hand who sprayed herbicides, including 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) - contaminated Agent Orange, in Vietnam from 1962 to 1971. Veterans who flew or serviced C-130 transport aircraft in Southeast Asia during the same time period but did not spray herbicides served as comparisons. In this study we examined whether the NCEP-defined metabolic syndrome in Air Force veterans who attended the 1982 baseline examination was associated with their subsequent cardiovascular and any-cause mortality and whether exposure to herbicides had any effect on this association.

  2. Business process reengineering in the inventory management to improve aircraft maintenance operations in the Indonesian Air Force

    OpenAIRE

    Susanto, Martinus Bram.

    2006-01-01

    The Indonesian Air Force has utilized computers in its administration as early as 1990. The computers, however, have not yet been optimized to support inventory management in aircraft maintenance operations, especially for the helicopter fleet. The processes for materials procurement to support the maintenance operations still rely heavily on the services of intermediaries'. Even though the Air Force has already adopted the Automatic Logistic Management System (ALMS), this has several weaknes...

  3. Learning Styles of Pilots Currently Qualified in United States Air Force Aircraft

    Science.gov (United States)

    Kanske, Craig A.

    2001-01-01

    Kolb's Learning Style Inventory was used to identify the predominant learning styles of pilots currently qualified in United States Air Force aircraft. The results indicate that these pilots show a significant preference for facts and things over people and feelings. By understanding the preferred learning styles of the target population, course material can be developed that take advantage of the strengths of these learning styles. This information can be especially useful in the future design of cockpit resource management training. The training program can be developed to demonstrate both that there are different learning styles and that it is possible to take advantage of the relative strengths of each of these learning styles.

  4. Disqualifying Medical Conditions of Flying Personnel in Chinese Army and Air Force

    Institute of Scientific and Technical Information of China (English)

    Chun-wei Wang; Shu-xuan Xu; Xian-rong Xu; Tong-xin Chen

    2008-01-01

    @@ After inpatient aircrews of Chinese Army and Air Force are treated at local hospitals,their health status will be evaluated.If it is aeronantieally adaptable,the conclusion would be flying qualification;if it may impact the flight safety or the flight environment may aggravate the illness,the conclusion would be flight suspension,and then the patient should be forwarded from local hospital to our hospital.After detailed examination,if the conditions of flying personnel are considered not qualified for flight,the conclusion of flying disqualification should be made finally.

  5. Counterflow flames of air and methane, propane and ethylene, with and without periodic forcing

    Energy Technology Data Exchange (ETDEWEB)

    Luff, D.; Korusoy, E.; Lindstedt, P.; Whitelaw, J.H. [Department of Mechanical Engineering, Thermofluids Section, Imperial College, SW7 2BX, London (United Kingdom)

    2003-12-01

    The extinction of forced and unforced turbulent premixed counterflow flames has been quantified with lean mixtures of air and each of methane, propane and ethylene. Symmetric flames were produced with two streams of equal equivalence ratios between 0.6 and 1.0, and nozzle separations from 0.2 to 2.5 D, while acoustic drivers were used to force the flow at discrete frequencies. Photographs confirmed visual observation of unforced twin flames and their merging with increasing strain rate into one reaction zone at the stagnation plane before extinction. Propane flames merged at velocities closer to the extinction limit. At separations less than 0.4 D local quenching and extinction and relight occurred at equivalence ratios less than 0.7, independent of fuel type. Unforced extinction times were determined by igniting mixtures with equivalence ratios of 0.6 to 0.9 and bulk velocities above the extinction limit, and observing the extinction process with high-speed video: they were found to increase quasi-exponentially with reduction in strain rate, and were strongly dependent on equivalence ratio and fuel type. Forced extinction times also increased with decrease in strain rate and with reduction in forcing amplitude and instantaneous strain rates greater than the unforced limit were observed. Ethylene flames were more sensitive to the cyclic weakening with more rapid temperature decay rates and shorter extinction times. (orig.)

  6. Study of Slope Reinforcement Force Based on FLAC

    Institute of Scientific and Technical Information of China (English)

    HUANG Xian-wu; MAO xian-biao; MIAO Xie-xing; CHEN Zhan-qing

    2006-01-01

    A slope will slide if the unbalanced force does not tend to zero when the stability of the slope is analyzed with the help of FLAC. Thus the ultimate reason of slope sliding is the unbalanced force determined by FLAC. The slope will remain stable if the unbalanced force is counterbalanced by a reinforcement force which is produced by a suitable reinforcement method. In this paper, the stability of the slope was analyzed by using FLAC, and the unbalanced force of the slope was obtained through the FISH function in FLAC. According to the equilibrium conditions, the relationship between the reinforcement force and unbalanced force was derived and accordingly the reinforcement force was determined. The reinforcement design was adopted by using pre-stressed anchor bars on the basis of the reinforcement force. An example is used to show that the effect of slope reinforcement based on the reinforcement force is safe and economical. The method doesn't need to suppose a sliding surface to obtain the reinforcement force, and it is also clear in physical meaning. So this method realized the organic unification of the stability analysis and the slope reinforcement

  7. Force Based Skill Learning for Robot Tasks in Contact Conditions

    Institute of Scientific and Technical Information of China (English)

    王琴; 梅志千; 张广立; 杨汝清

    2004-01-01

    To acquire human operation skill based on force sense, element contact form (ECF) is proposed to describe contact condition firstly. The skill is modeled as a sequence of discrete ECFs. Since different ECF has different force distribution, a support vector machine classifier is built to identify the contact conditions according to the force signal. Finally, the robot can obtain the skill from the human demonstration.

  8. Vehicle Lateral State Estimation Based on Measured Tyre Forces

    OpenAIRE

    Tuononen, Ari J.

    2009-01-01

    Future active safety systems need more accurate information about the state of vehicles. This article proposes a method to evaluate the lateral state of a vehicle based on measured tyre forces. The tyre forces of two tyres are estimated from optically measured tyre carcass deflections and transmitted wirelessly to the vehicle body. The two remaining tyres are so-called virtual tyre sensors, the forces of which are calculated from the real tyre sensor estimates. The Kalman filter estimator for...

  9. Separations based on the mechanical forces of light.

    Science.gov (United States)

    Zhao, Bum Suk; Koo, Yoon-Mo; Chung, Doo Soo

    2006-01-18

    A photon as a particle has an energy and a momentum. In a matter-photon interaction, the matter and photons may exchange their momenta observing the momentum conservation law. The consequence of the momentum transfer from a photon to a matter particle is a mechanical force exerted on the particle. Several separation methods based on this force of light are reviewed. Photophoresis separations for micron-sized particles and optical force chromatography for chemical-sized molecules are discussed. PMID:17723334

  10. An Improved Calibration Method for Hydrazine Monitors for the United States Air Force

    Energy Technology Data Exchange (ETDEWEB)

    Korsah, K

    2003-07-07

    This report documents the results of Phase 1 of the ''Air Force Hydrazine Detector Characterization and Calibration Project''. A method for calibrating model MDA 7100 hydrazine detectors in the United States Air Force (AF) inventory has been developed. The calibration system consists of a Kintek 491 reference gas generation system, a humidifier/mixer system which combines the dry reference hydrazine gas with humidified diluent or carrier gas to generate the required humidified reference for calibrations, and a gas sampling interface. The Kintek reference gas generation system itself is periodically calibrated using an ORNL-constructed coulometric titration system to verify the hydrazine concentration of the sample atmosphere in the interface module. The Kintek reference gas is then used to calibrate the hydrazine monitors. Thus, coulometric titration is only used to periodically assess the performance of the Kintek reference gas generation system, and is not required for hydrazine monitor calibrations. One advantage of using coulometric titration for verifying the concentration of the reference gas is that it is a primary standard (if used for simple solutions), thereby guaranteeing, in principle, that measurements will be traceable to SI units (i.e., to the mole). The effect of humidity of the reference gas was characterized by using the results of concentrations determined by coulometric titration to develop a humidity correction graph for the Kintek 491 reference gas generation system. Using this calibration method, calibration uncertainty has been reduced by 50% compared to the current method used to calibrate hydrazine monitors in the Air Force inventory and calibration time has also been reduced by more than 20%. Significant findings from studies documented in this report are the following: (1) The Kintek 491 reference gas generation system (generator, humidifier and interface module) can be used to calibrate hydrazine detectors. (2) The

  11. Symptoms of psychological distress and post-traumatic stress disorder in United States Air Force "drone" operators.

    Science.gov (United States)

    Chappelle, Wayne L; McDonald, Kent D; Prince, Lillian; Goodman, Tanya; Ray-Sannerud, Bobbie N; Thompson, William

    2014-08-01

    The goal of this study is to repeat a survey administered in 2010 to assess for changes in mental health among United States Air Force aircrew operating Predator/Reaper remotely piloted aircraft, also commonly referred to as "drones." Participants were assessed for self-reported sources of occupational stress, levels of clinical distress using the Outcome Questionnaire-45.2, and symptoms of post-traumatic stress disorder (PTSD) using the PTSD Checklist-Military Version. A total of 1,094 aircrew responded to the web-based survey composed of the commercially available standardized instruments mentioned above. The survey also contained nonstandardized items asking participants to report the main sources of their occupational stress, as well as questions addressing demographics and work-related characteristics. The estimated response rate to the survey was 49%. Study results reveal the most problematic self-reported stressors are operational: low manning, extra duties/administrative tasks, rotating shift work, and long hours. The results also reveal 10.72% of operators self-reported experiencing high levels of distress and 1.57% reported high levels of PTSD symptomology. The results are lower than findings from the 2010 survey and from soldiers returning from Iraq and Afghanistan. Implications of the study and recommendations for United States Air Force line leadership and mental health providers are discussed.

  12. Symptoms of psychological distress and post-traumatic stress disorder in United States Air Force "drone" operators.

    Science.gov (United States)

    Chappelle, Wayne L; McDonald, Kent D; Prince, Lillian; Goodman, Tanya; Ray-Sannerud, Bobbie N; Thompson, William

    2014-08-01

    The goal of this study is to repeat a survey administered in 2010 to assess for changes in mental health among United States Air Force aircrew operating Predator/Reaper remotely piloted aircraft, also commonly referred to as "drones." Participants were assessed for self-reported sources of occupational stress, levels of clinical distress using the Outcome Questionnaire-45.2, and symptoms of post-traumatic stress disorder (PTSD) using the PTSD Checklist-Military Version. A total of 1,094 aircrew responded to the web-based survey composed of the commercially available standardized instruments mentioned above. The survey also contained nonstandardized items asking participants to report the main sources of their occupational stress, as well as questions addressing demographics and work-related characteristics. The estimated response rate to the survey was 49%. Study results reveal the most problematic self-reported stressors are operational: low manning, extra duties/administrative tasks, rotating shift work, and long hours. The results also reveal 10.72% of operators self-reported experiencing high levels of distress and 1.57% reported high levels of PTSD symptomology. The results are lower than findings from the 2010 survey and from soldiers returning from Iraq and Afghanistan. Implications of the study and recommendations for United States Air Force line leadership and mental health providers are discussed. PMID:25102551

  13. Automation&Characterization of US Air Force Bench Top Wind Tunnels - Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, J.E.

    2006-03-23

    The United States Air Force Precision Measurement Equipment Laboratories (PMEL) calibrate over 1,000 anemometer probes per year. To facilitate a more efficient calibration process for probe-style anemometers, the Air Force Metrology and Calibration Program underwent an effort to modernize the existing PMEL bench top wind tunnels. Through a joint effort with the Department of Energy's Oak Ridge National Laboratory, the performance of PMEL wind tunnels was improved. The improvement consisted of new high accuracy sensors, automatic data acquisition, and a software-driven calibration process. As part of the wind tunnel upgrades, an uncertainty analysis was completed, laser Doppler velocimeter profiling was conducted to characterize the velocities at probe locations in the wind tunnel, and pitot tube calibrations of the wind tunnel were verified. The bench top wind tunnel accuracy and repeatability has been measured for nine prototype wind tunnel systems and valuable field experience has been gained with these wind tunnels at the PMELs. This report describes the requirements for the wind tunnel improvements along with actual implementation strategies and details. Lessons-learned from the automation, the velocity profiling, and the software-driven calibration process will also be discussed.

  14. Nike Air Force 1 Low LeBron MVP Customs最有价值定制

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    这不是一双官方发布的鞋款,这是一双由球鞋爱好者自行定制的Air Force 1。也许很多人已经得知Nike将要发布MVP版本的Zoom Lebron Six,但是这双Custom的Air Force1 LeBron MVP呢?首先在颜色上,设计者选择了骑士第二客场的红蓝黄配色.前掌外侧用詹姆斯经典的“洒粉”动作与MVP字样结合的图案.后部是繁杂的数字以表现詹姆斯在本赛季的各项惊人数据,鞋舌处还有詹姆斯的皇冠图案与MVP字样组合而成的独特Logo。虽然詹

  15. Information-based physics, influence, and forces

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, James Lyons [Department of Physics, University at Albany (SUNY) (United States); Knuth, Kevin H. [Department of Physics, University at Albany (SUNY) and Department of Informatics, University at Albany (SUNY) (United States)

    2015-01-13

    In recent works, Knuth and Bahreyni have demonstrated that the concepts of space and time are emergent in a coarse-grained model of direct particle-particle influence. In addition, Knuth demonstrated that observer-made inferences regarding the free particle, which is defined as a particle that influences others, but is not itself influenced, result in a situation identical to the Feynman checkerboard model of the Dirac equation. This suggests that the same theoretical framework that gives rise to an emergent spacetime is consistent with quantum mechanics. In this paper, we begin to explore the effect of influence on the emergent properties of a particle. This initial study suggests that when a particle is influenced, it is interpreted as accelerating in a manner consistent with special relativity implying that, at least in this situation, influence can be conceived of as a force.

  16. Closure Report for Corrective Action Unit 486: Double Tracks RADSAFE Area Nellis Air Force Range, Nevada

    International Nuclear Information System (INIS)

    The Double Tracks Radiological Safety Area (DTRSA), Corrective Action Unit (CAU) 486, was clean-closed following the approved Corrective Action Decision Document closure alternative and in accordance with the Federal Facility Agreement and Consent Order. The CAU consists of a single Corrective Action Site, 71-23-001-71DT. The DTRSA was used during May 1963 to decontaminate vehicles, equipment, personnel and animals from the Double Tracks Test. Double Tracks was one of four storage-transportation tests. The Double Tracks test was conducted in Stonewall Flat, approximately 32 kilometers (20 miles) east of Goldfield, Nevada, on the Nellis Air Force Range. The Double Tracks Test used a single device containing plutonium and depleted uranium and was designed to investigate the characteristics of plutonium-bearing particulate material formed by the non-nuclear detonation of a nuclear weapon. All facilities associated with the DTRSA operation were removed. Based on available information, the areas of concern at the DTRSA consisted of a decon facility (vehicle decon pad and decon sump) in the southern half of the DTRSA, and a burial pit and former loading/unloading area located in the northern half of the DTRSA. Based on the results of the Corrective Action Investigation, radiological field screening detected elevated gamma and alpha readings on excavated plastic debris. Swipe surveys taken on the plastic debris detected removable alpha. No contaminants were detected above preliminary action levels in soil samples. The debris excavated during the corrective action investigation was not characterized. The clean-closure corrective action consisted of excavation, disposal, verification sampling, backfilling, and regrading. Field activities began on May 1, 2000, and ended on May 10, 2000. Soil that was associated with the radiologically contaminated man-made debris was placed into B-25 bins, moved to the designated waste management area where it was scanned, and hauled off

  17. How realistic are air quality hindcasts driven by forcings from climate model simulations?

    Directory of Open Access Journals (Sweden)

    G. Lacressonnière

    2012-12-01

    Full Text Available Predicting how European air quality could evolve over the next decades in the context of changing climate requires the use of climate models to produce results that can be averaged in a climatologically and statistically sound manner. This is a very different approach from the one that is generally used for air quality hindcasts for the present period; analysed meteorological fields are used to represent specifically each date and hour. Differences arise both from the fact that a climate model run results in a pure model output, with no influence from observations (which are useful to correct for a range of errors, and that in a "climate" set-up, simulations on a given day, month or even season cannot be related to any specific period of time (but can just be interpreted in a climatological sense. Hence, although an air quality model can be thoroughly validated in a "realistic" set-up using analysed meteorological fields, the question remains of how far its outputs can be interpreted in a "climate" set-up. For this purpose, we focus on Europe and on the current decade using three 5-yr simulations performed with the multiscale chemistry-transport model MOCAGE and use meteorological forcings either from operational meteorological analyses or from climate simulations. We investigate how statistical skill indicators compare in the different simulations, discriminating also the effects of meteorology on atmospheric fields (winds, temperature, humidity, pressure, etc. and on the dependent emissions and deposition processes (volatile organic compound emissions, deposition velocities, etc.. Our results show in particular how differing boundary layer heights and deposition velocities affect horizontal and vertical distributions of species. When the model is driven by operational analyses, the simulation accurately reproduces the observed values of O3, NOx, SO2 and, with some bias that can be explained by the set-up, PM

  18. How realistic are air quality hindcasts driven by forcings from climate model simulations?

    Directory of Open Access Journals (Sweden)

    G. Lacressonnière

    2012-07-01

    Full Text Available Predicting how European air quality could evolve over the next decades in the context of changing climate requires the use of climate models to produce results that can be averaged in a climatologically and statistically sound manner. This is a very different approach from the one that is generally used for air quality hindcasts for the present period: analysed meteorological fields are used to represent specifically each date and hour. Differences arise both from the fact that a climate model run is a pure model output, with no influence from observations (which are useful to correct for a range of errors, and that in a "climate" set-up, simulations on a given day, month or even season cannot be related to any specific period of time (but can just be interpreted in a climatological sense. Hence, although an air quality model can be thoroughly validated in a "realistic" set-up using analysed meteorological fields, the question remains of how far its outputs can be interpreted in a "climate" set-up. For this purpose, we focus on Europe and on the current decade using three 6-yr simulations performed with the multiscale chemistry-transport model MOCAGE and use meteorological forcings either from operational meteorological analyses or from climate simulations. We investigate how statistical skill indicators compare in the different simulations, discriminating also the effects of meteorology on atmospheric fields (winds, temperature, humidity, pressure ldots and on the dependent emissions and deposition processes (volatile organic compound emissions, deposition velocities . . .. Our results show in particular how differing boundary layer heights and deposition velocities affect horizontal and vertical distributions of species. When the model is driven by operational analyses, the simulation accurately reproduces the observed values of O3, NOx, SO2 and, with some bias that can be explained by the set-up, PM10

  19. Perspective on One Decade of Laser Propulsion Research at Air Force Research Laboratory

    Science.gov (United States)

    Larson, C. William

    2008-04-01

    The Air Force Laser Propulsion Program spanned nearly 10-years and included about 35-weeks of experimental research with the Pulsed Laser Vulnerability Test System of the High Energy Laser Systems Test Facility at White Sands Missile Range, New Mexico, WSMR/HELSTF/PLVTS. PLVTS is a pulsed CO2 laser that produces up to 10 kW of power in ˜10 cm2 spot at wavelength of 10.6 microns. The laser is capable of a pulse repetition rate up to 25 Hz, with pulse durations of about 20 microseconds. During the program basic research was conducted on the production of propulsion thrust from laser energy through heating of air and ablation of various candidate rocket propellant fuels. Flight tests with an ablation fuel (Delrin) and air were accomplished with a model Laser Lightcraft vehicle that was optimized for propulsion by the PLVTS at its maximum power output, 10 kW at 25 Hz, 400 J/pulse. Altitudes exceeding 200-feet were achieved with ablation fuels. The most recent contributions to the technology included development of a mini-thruster standard for testing of chemically enhanced fuels and theoretical calculations on the performance of formulations containing ammonium nitrate and Delrin. Results of these calculations will also be reported here.

  20. Asian Dust particles impacts on air quality and radiative forcing over Korea

    International Nuclear Information System (INIS)

    Asian Dust particles originated from the deserts and loess areas of the Asian continent are often transported over Korea, Japan, and the North Pacific Ocean during spring season. Major air mass pathway of Asian dust storm to Korea is from either north-western Chinese desert regions or north-eastern Chinese sandy areas. The local atmospheric environment condition in Korea is greatly impacted by Asian dust particles transported by prevailing westerly wind. Since these Asian dust particles pass through heavily populated urban and industrial areas in China before it reach Korean peninsular, their physical, chemical and optical properties vary depending on the atmospheric conditions and air mass pathway characteristics. An integrated system approach has been adopted at the Advanced Environment Monitoring Research Center (ADEMRC), Gwangju Institute Science and Technology (GIST), Korea for effective monitoring of atmospheric aerosols utilizing various in-situ and optical remote sensing methods, which include a multi-channel Raman LIDAR system, sunphotometer, satellite, and in-situ instruments. Results from recent studies on impacts of Asian dust particles on local air quality and radiative forcing over Korea are summarized here.

  1. Influence of future air pollution mitigation strategies on total aerosol radiative forcing

    Directory of Open Access Journals (Sweden)

    S. Kloster

    2008-03-01

    Full Text Available We apply different aerosol and aerosol precursor emission scenarios reflecting possible future control strategies for air pollution in the ECHAM5-HAM model, and simulate the resulting effect on the Earth's radiation budget. We use two opposing future mitigation strategies for the year 2030: one in which emission reduction legislation decided in countries throughout the world are effectively implemented (current legislation; CLE 2030 and one in which all technical options for emission reductions are being implemented independent of their cost (maximum feasible reduction; MFR 2030.

    We consider the direct, semi-direct and indirect radiative effects of aerosols. The total anthropogenic aerosol radiative forcing defined as the difference in the top-of-the-atmosphere radiation between 2000 and pre-industrial times amounts to −2.05 W/m2. In the future this negative global annual mean aerosol radiative forcing will only slightly change (+0.02 W/m2 under the "current legislation" scenario. Regionally, the effects are much larger: e.g. over Eastern Europe radiative forcing would increase by +1.50 W/m2 because of successful aerosol reduction policies, whereas over South Asia it would decrease by −1.10 W/m2 because of further growth of emissions. A "maximum feasible reduction" of aerosols and their precursors would lead to an increase of the global annual mean aerosol radiative forcing by +1.13 W/m2. Hence, in the latter case, the present day negative anthropogenic aerosol forcing cloud be more than halved by 2030 because of aerosol reduction policies and climate change thereafter will be to a larger extend be controlled by greenhouse gas emissions.

    We combined these two opposing future mitigation strategies for a number of experiments focusing on different sectors and regions. In addition, we performed sensitivity studies to estimate the importance of future changes in

  2. A new facility to realize a nanonewton force standard based on electrostatic methods

    Science.gov (United States)

    Nesterov, V.; Mueller, M.; Frumin, L. L.; Brand, U.

    2009-06-01

    A new differential nanoforce facility, based on a disc-pendulum with electrostatic stiffness reduction and an electrostatic force compensation for the measurement of horizontal forces in the range below 1 µN, is presented. First measurements in air over an averaging time of 50 s show a noise level of the facility of 42 pN. The method and the results of measuring the light pressure of a red He-Ne laser with a power of 7 mW (FL = 47 pN) are presented. The force measurement uncertainty of the device is below 5%, for a force to be measured of 1 nN and a measuring duration of 50 s.

  3. FORCE FEEDBACK DATAGLOVE BASED ON PNEUMATIC ARTIFICIAL MUSCLES

    Institute of Scientific and Technical Information of China (English)

    BAO Gang; SUN Zhongsheng; WANG Zuwen

    2006-01-01

    An exoskeleton force feedback dataglove is developed, which uses the pneumatic artificial muscles as actuators. On the basis of the simplified hand model, the motion equation is deduced according to the theory of Denavit-Hartenberg. The model of the equivalent contact forces exerted by the object on the finger is proposed. By the principle of virtual work, the static equilibrium of finger is established. The force Jacobian matrix of finger is calculated, and then the joint torques of the finger when grasping objects are obtained. The theory and structure of the force feedback datagolve are introduced. Based on the theory of motion stabilization of four-bar linkage, the flexion angles of joints are measured. The torques on finger joints caused by the output forces of pneumatic artificial muscles are calculated. The output forces of pneumatic artificial muscle, whose values are controlled by its inner pressure, can be calculated by the joint torques ofthe finger when grasping objects. The arms of force, driving torques and the needed output forces of pneumatic muscle are calculated for each joint of the index finger. The criterion of output force of pneumatic muscle is given.

  4. Air quality and radiative forcing impacts of anthropogenic volatile organic compound emissions from ten world regions

    Directory of Open Access Journals (Sweden)

    M. M. Fry

    2013-08-01

    Full Text Available Non-methane volatile organic compounds (NMVOCs influence air quality and global climate change through their effects on secondary air pollutants and climate forcers. Here we simulate the air quality and radiative forcing (RF impacts of changes in ozone, methane, and sulfate from halving anthropogenic NMVOC emissions globally and from 10 regions individually, using a global chemical transport model and a standalone radiative transfer model. Halving global NMVOC emissions decreases global annual average tropospheric methane and ozone by 36.6 ppbv and 3.3 Tg, respectively, and surface ozone by 0.67 ppbv. All regional reductions slow the production of PAN, resulting in regional to intercontinental PAN decreases and regional NOx increases. These NOx increases drive tropospheric ozone increases nearby or downwind of source regions in the Southern Hemisphere (South America, Southeast Asia, Africa, and Australia. Some regions' NMVOC emissions contribute importantly to air pollution in other regions, such as East Asia, Middle East, and Europe, whose impact on US surface ozone is 43%, 34%, and 34% of North America's impact. Global and regional NMVOC reductions produce widespread negative net RFs (cooling across both hemispheres from tropospheric ozone and methane decreases, and regional warming and cooling from changes in tropospheric ozone and sulfate (via several oxidation pathways. The total global net RF for NMVOCs is estimated as 0.0277 W m−2 (~1.8% of CO2 RF since the preindustrial. The 100 yr and 20 yr global warming potentials (GWP100, GWP20 are 2.36 and 5.83 for the global reduction, and 0.079 to 6.05 and −1.13 to 18.9 among the 10 regions. The NMVOC RF and GWP estimates are generally lower than previously modeled estimates, due to differences among models in ozone, methane, and sulfate sensitivities, and the climate forcings included in each estimate. Accounting for a~fuller set of RF contributions may change the relative magnitude of each

  5. Model of Air Force Logistics War Fighting Experimentation%空军后勤作战实验模型

    Institute of Scientific and Technical Information of China (English)

    宗龙强; 罗兴永; 温继海

    2016-01-01

    为提高空军后勤作战实验模型构建的质量和效益,构建一种空军后勤作战实验5层结构模型体系。在深入分析空军后勤系统的基础上,通过分析空军后勤作战实验模型体系的构建要求,运用UML建立了飞行保障指挥控制模型。分析结果表明:该5层结构模型体系基本厘清了空军后勤作战实验模型构建需求,为模型构建工作提供了一个基本的架构。%In order to improve the quality and efficiency of model of air force logistics war fighting experimentation, establish a five-level architecture model system of air force logistics. By penetratingly analyzing the air force logistics system, through analyze air construction requirement force logistics war fighting experimentation model system, use UML to establish flight protection command control model. The analysis results show that, the five-level architecture model system meets the establishment requirement of air force logistics war fighting experimentation, and provides a basic architecture for the model establishment.

  6. Force-rebalanced Lorentz force magnetometer based on a micromachined oscillator

    Science.gov (United States)

    Sonmezoglu, S.; Li, M.; Horsley, D. A.

    2015-03-01

    This paper presents a 3-axis Lorentz force magnetometer based on an encapsulated micromechanical silicon resonator having three orthogonal vibration modes, each measuring one vector component of the external magnetic field. One mode, with natural frequency (fn) of 46.973 kHz and quality factor (Q) of 14 918, is operated as a closed-loop electrostatically excited oscillator to provide a frequency reference for 3-axis sensing and Lorentz force generation. Current, modulated at the reference frequency, is injected into the resonator, producing Lorentz force that is centered at the reference frequency. Lorentz force in the first axis is nulled by the oscillator loop, resulting in force-rebalanced operation. The bandwidth and scale-factor of this force-rebalanced axis are independent of resonator Q, improving the sensor's temperature coefficient from 20 841 ppm/ °C to 424 ppm/ °C. The frequencies of the other two modes are closely spaced to the first mode's reference frequency and are demonstrated to track this frequency over temperature within 1 ppm/K. Field measurements in these two axes are conducted open-loop and off-resonance, ensuring that the scale-factor is independent of Q to first order and producing a measurement bandwidth of over 40 Hz.

  7. CATS-based Air Traffic Controller Agents

    Science.gov (United States)

    Callantine, Todd J.

    2002-01-01

    This report describes intelligent agents that function as air traffic controllers. Each agent controls traffic in a single sector in real time; agents controlling traffic in adjoining sectors can coordinate to manage an arrival flow across a given meter fix. The purpose of this research is threefold. First, it seeks to study the design of agents for controlling complex systems. In particular, it investigates agent planning and reactive control functionality in a dynamic environment in which a variety perceptual and decision making skills play a central role. It examines how heuristic rules can be applied to model planning and decision making skills, rather than attempting to apply optimization methods. Thus, the research attempts to develop intelligent agents that provide an approximation of human air traffic controller behavior that, while not based on an explicit cognitive model, does produce task performance consistent with the way human air traffic controllers operate. Second, this research sought to extend previous research on using the Crew Activity Tracking System (CATS) as the basis for intelligent agents. The agents use a high-level model of air traffic controller activities to structure the control task. To execute an activity in the CATS model, according to the current task context, the agents reference a 'skill library' and 'control rules' that in turn execute the pattern recognition, planning, and decision-making required to perform the activity. Applying the skills enables the agents to modify their representation of the current control situation (i.e., the 'flick' or 'picture'). The updated representation supports the next activity in a cycle of action that, taken as a whole, simulates air traffic controller behavior. A third, practical motivation for this research is to use intelligent agents to support evaluation of new air traffic control (ATC) methods to support new Air Traffic Management (ATM) concepts. Current approaches that use large, human

  8. An analysis of post-traumatic stress symptoms in United States Air Force drone operators.

    Science.gov (United States)

    Chappelle, Wayne; Goodman, Tanya; Reardon, Laura; Thompson, William

    2014-06-01

    Remotely piloted aircraft (RPA), commonly referred to as "drones," have emerged over the past decade as an innovative warfighting tool. Given there is a paucity of empirical research assessing drone operators, the purpose of this study was to assess for the prevalence of PTSD symptoms among this cohort. Of the 1084 United States Air Force (USAF) drone operators that participated, a total of 4.3% endorsed a pattern of symptoms of moderate to extreme level of severity meeting criteria outlined in the Diagnostic and Statistical Manual of Mental Disorders-4th edition. The incidence of PTSD among USAF drone operators in this study was lower than rates of PTSD (10-18%) among military personnel returning from deployment but higher than incidence rates (less than 1%) of USAF drone operators reported in electronic medical records. Although low PTSD rates may be promising, limitations to this study are discussed.

  9. An analysis of post-traumatic stress symptoms in United States Air Force drone operators.

    Science.gov (United States)

    Chappelle, Wayne; Goodman, Tanya; Reardon, Laura; Thompson, William

    2014-06-01

    Remotely piloted aircraft (RPA), commonly referred to as "drones," have emerged over the past decade as an innovative warfighting tool. Given there is a paucity of empirical research assessing drone operators, the purpose of this study was to assess for the prevalence of PTSD symptoms among this cohort. Of the 1084 United States Air Force (USAF) drone operators that participated, a total of 4.3% endorsed a pattern of symptoms of moderate to extreme level of severity meeting criteria outlined in the Diagnostic and Statistical Manual of Mental Disorders-4th edition. The incidence of PTSD among USAF drone operators in this study was lower than rates of PTSD (10-18%) among military personnel returning from deployment but higher than incidence rates (less than 1%) of USAF drone operators reported in electronic medical records. Although low PTSD rates may be promising, limitations to this study are discussed. PMID:24907535

  10. FIRE, FLOOD AND ICE: SEARCH AND RESCUE MISSIONS OF THE SOUTH AFRICAN AIR FORCE

    Directory of Open Access Journals (Sweden)

    Lindelwa Simphiwe Mnyandu

    2012-02-01

    Full Text Available Between the end of 1999 and the early months of the year 2000, the south western parts of South Africa (SA were subjected to raging infernos that saw a lot of commercial wine farms as well as tourist spots almost irreparably ravaged. With volunteers and rescue personnel still gasping for fresh breath another disaster, in the form of torrential rains, struck the impoverished country of Mozambique and the north western parts of SA. The attendant floods did not only cripple agriculture but also drowned people and livestock alike. With them, also came the first "treebirth" in this new millennium (if not in the history of mankind. In both catastrophes, the men and women of the South African Air Force (SAAF, as well as thousands of other volunteers, worked tirelessly and unselfishly in efforts to save endangered lives and property and to bring a sense of normality in otherwise tragic circumstances.

  11. Atomic force microscope probe-based nanometric scribing

    International Nuclear Information System (INIS)

    Miniaturization of machine components is recognized by many as a significant technological development for a vast spectrum of products. An atomic force microscope (AFM) probe that can exert forces onto a variety of engineering materials is used to perform mechanical scribing at the nanoscale. The success of nanomechanical machining at such fine scales is based on the understanding of microstructural machining mechanics. This paper investigates the cutting behaviour in the nanoscale of a chromium workpiece by using a retrofitted commercial AFM with an acoustic emission sensor, in order to scratch the surface and measure forces. The calibration procedure for acquiring the forces is discussed. The cutting force model, which incorporates the flow stress and friction coefficient in the nano-scale machining, is also presented

  12. External Force Estimation for Teleoperation Based on Proprioceptive Sensors

    Directory of Open Access Journals (Sweden)

    Enrique del Sol

    2014-03-01

    Full Text Available This paper establishes an approach to external force estimation for telerobotic control in radioactive environments by the use of an identified manipulator model and pressure sensors, without employing a force/torque sensor. The advantages of - and need for - force feedback have been well-established in the field of telerobotics, where electrical and back-drivable manipulators have traditionally been used. This research proposes a methodology employing hydraulic robots for telerobotics tasks based on a model identification scheme. Comparative results of a force sensor and the proposed approach using a hydraulic telemanipulator are presented under different conditions. This approach not only presents a cost effective solution but also a methodology for force estimation in radioactive environments, where the dose rates limit the use of electronic devices such as sensing equipment.

  13. Post-hurricane Rita mosquito surveillance and the efficacy of Air Force aerial applications for mosquito control in east Texas.

    Science.gov (United States)

    Breidenbaugh, Mark S; Haagsma, Karl A; Walker, Wes W; Sanders, David M

    2008-06-01

    Post-Hurricane Rita mosquito surveillance was carried out in 4 east Texas counties to determine mosquito abundance, species composition, and need for mosquito control. Subsequently, aerial applications of naled (Dibrom) for mosquito control were made by the Air Force Aerial Spray Flight, while continued surveillance documented the efficacy of the applications. Psorophora columbiae was the predominant species in landing counts. Twenty-two mosquito species were represented in light trap collections with Aedes atlanitcus/tormentor, Culex nigripalpus, Ae. vexans, and Ps. columbiae making up 91% of the total. A total of 102,001 ha (252,052 acres) were aerially treated based on high mosquito abundance, exposure of first responders and residents to nuisance biting, and local interruption of electric utilities. A significant 90% decline in mosquito abundance was observed posttreatment. PMID:18666545

  14. Exposures to 1,6-hexamethylene diisocyanate during polyurethane spray painting in the U.S. Air Force.

    Science.gov (United States)

    Carlton, G N; England, E C

    2000-09-01

    1,6-Hexamethylene diisocyanate (HDI) exposures were measured during polyurethane enamel spray painting at four Air Force bases. Breathing zone samples were collected for HDI monomer and polyisocyanates (oligomers) using three sampling methods: NIOSH Method 5521, the Iso-Chek sampler, and the total aerosol mass method (TAMM). Exposures to HDI monomer are low when compared to current occupational exposure limits; the highest 8-hr time-weighted average (TWA) exposure found was 3.5 micrograms/m3, below the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value (TLV) of 34 micrograms/m3. HDI oligomer levels were higher; mean task exposures indicated by either the Iso-Chek sampler or TAMM are above the Oregon ceiling limit of 1 mg/m3. Eight-hour TWA exposures, however, were much lower, with only one exceeding the Oregon standard of 0.5 mg/m3. Poor worker practices commonly observed during this study included: standing in downwind positions so paint overspray passed through breathing zones; spraying toward other painters; and using excessive paint spray gun air cap pressures. Workers should stand in upwind orientation relative to the aircraft being painted, causing overspray to move away from the painter's breathing zone; adjust their position to prevent spraying other painters or limit paint application to one worker at a time; and use air cap pressure gauges prior to spraying to limit spray gun air cap pressures and reduce paint overspray generation rates. These improved techniques will result in reduced worker exposures to isocyanates. PMID:10983405

  15. Back pain and its consequences among Polish Air Force pilots flying high performance aircraft

    Directory of Open Access Journals (Sweden)

    Aleksandra Truszczyńska

    2014-04-01

    Full Text Available Objectives: Back pain in Air Force fast jet pilots has been studied by several air forces and found to be relatively common. The objective of the study was to determine the prevalence and degree of the pain intensity in the cervical, thoracic and lumbar spine, subjective risk factors and their effect on the pilots' performance while flying high maneuver aircrafts and the consequences for cognitive deficiencies. Material and Methods: The study was designed as a retrospective, anonymous questionnaire survey, collecting data on the age, aircraft type, flying hours, pain characteristics, physical activity, etc. The study was participated by 94 pilots aged 28-45 years (mean age: 35.9±3.3 years, actively flying fast jet aircrafts Su-22, Mig-29 and F-16. The estimates regarding the level of the subjective back pain were established using visual analogue scales (VAS. Results: The values of the Cochran and Cox T-test for heterogeneous variances are as follows: for the total number of flying hours: F = 2.53, p = 0.0145, for the pilot's age: F = 3.15, p = 0.003, and for the BMI factor F = 2.73, p = 0.008. Conclusions: Our questionnaire survey showed a significant problem regarding spinal conditions in high performance aircraft pilots. The determination of the risk factors may lead to solving this problem and help eliminate the effect of the unfavorable environment on piloting jet aircrafts. Experiencing back pain during the flight might influence the mission performance and flight safety. The costs of pilots education are enormous and inability to fly, or even disability, leads to considerable economic loss. More research on specific prevention strategies is warranted in order to improve the in-flight working environment of fighter pilots.

  16. 78 FR 9038 - Office of the Secretary of the Air Force Acceptance of Group Application Under Public Law 95-202...

    Science.gov (United States)

    2013-02-07

    ... Department of the Air Force Office of the Secretary of the Air Force Acceptance of Group Application Under Public Law 95-202 and Department of Defense Directive (DODD) 1000.20: U.S. and Foreign Employees of Air America, Inc. Under the provisions of Section 401, Public Law 95-202 and DoD Directive 1000.20,...

  17. Air damping effect on the air-based CMUT operation

    Science.gov (United States)

    Cha, Bu-Sang; Kanashima, Takeshi; Lee, Seung-Mok; Okuyama, Masanori

    2015-08-01

    The vibration amplitude, damping ratio and viscous damping force in capacitive micromachinedultrasonic transducers (CMUTs) with a perforated membrane have been calculated theoretically and compared with the experimental data on its vibration behavior. The electrical bias of the DC and the AC voltages and the operation frequency conditions influence the damping effect because leads to variations in the gap height and the vibration velocity of the membrane. We propose a new estimation method to determine the damping ratio by the decay rate of the vibration amplitudes of the perforated membrane plate are measured using a laser vibrometer at each frequency, and the damping ratios were calculated from those results. The influences of the vibration frequency and the electrostatic force on the damping effect under the various operation conditions have been studied.

  18. NASA/Air Force/Environmental Protection Agency Interagency Depainting Study

    Science.gov (United States)

    Clark-Ingram, Marceia

    1998-01-01

    Many popular and widely used paint stripping products have traditionally contained methylene chloride as their main active ingredient. However, the Environmental Protection Agency (EPA) has critically curved the allowable use of methylene chloride under the National Emission Standard for Hazardous Air Pollutants regulating Aerospace Manufacturing and Rework Facilities . Compliance with this rule was mandatory by September 1998 for affected facilities. An effort is underway to identify and evaluate alternative depainting technologies emphasizing those believed both effective and environmentally benign. On behalf of the EPA and in cooperation with the United States Air Force, the National Aeronautics and Space Administration is conducting a technical assessment of several alternative technologies ( i.e. : chemical stripping, two CO2 blasting processes, CO2 xenon lamp coating removal, CO2 Laser stripping, plastic media blasting, sodium bicarbonate wet stripping, high pressure water stripping, and wheat starch blasting). These depainting processes represent five removal method categories, namely abrasive, impact, cryogenic, thermal, and/or molecular bonding dissociation. This paper discusses the test plan and parameters for this interagency study. Several thicknesses of clad and non-clad aluminum substrates were used to prepare test specimens. Each depainting process has been assigned a specimen lot, all of which have completed three to five stripping cycles. Numerous metallurgical evaluations are underway to assess the impact of these alternative depainting processes upon the structural integrity of the substrate.

  19. Changes in cervical muscle activity according to the traction force of an air-inflatable neck traction device.

    Science.gov (United States)

    Kang, Jong Ho; Park, Tae-Sung

    2015-09-01

    [Purpose] The purpose of this study was to analyze cervical muscle activity at different traction forces of an air-inflatable neck traction device. [Subjects] Eighteen males participated in this study. [Methods] The subjects put on an air-inflatable neck traction device and the traction forces administered were 40, 80, and 120 mmHg. The electromyography (EMG) signals of the splenius capitis, and upper trapezius were measured to assess the muscle activity. [Results] The muscle activity of the splenius capitis was significantly higher at 80, and 120 mmHg compared to 40 mmHg. The muscle activity of the upper trapezius did not show significant differences among the traction forces. [Conclusion] Our research result showed that the air-inflatable home neck traction device did not meet the condition of muscle relaxation. PMID:26504278

  20. Supplemental site inspection for Air Force Plant 59, Johnson City, New York, Volume 3: Appendices F-Q

    Energy Technology Data Exchange (ETDEWEB)

    Nashold, B.; Rosenblatt, D.; Hau, J. [and others

    1995-08-01

    This summary describes a Supplemental Site Inspection (SSI) conducted by Argonne National Laboratory (ANL) at Air Force Plant 59 (AFP 59) in Johnson City, New York. All required data pertaining to this project were entered by ANL into the Air Force-wide Installation Restoration Program Information System (IRPIMS) computer format and submitted to an appropriate authority. The work was sponsored by the United States Air Force as part of its Installation Restoration Program (IRP). Previous studies had revealed the presence of contaminants at the site and identified several potential contaminant sources. Argonne`s study was conducted to answer questions raised by earlier investigations. This volume consists of appendices F-Q, which contain the analytical data from the site characterization.

  1. Vehicle Lateral State Estimation Based on Measured Tyre Forces

    Directory of Open Access Journals (Sweden)

    Ari J. Tuononen

    2009-10-01

    Full Text Available Future active safety systems need more accurate information about the state of vehicles. This article proposes a method to evaluate the lateral state of a vehicle based on measured tyre forces. The tyre forces of two tyres are estimated from optically measured tyre carcass deflections and transmitted wirelessly to the vehicle body. The two remaining tyres are so-called virtual tyre sensors, the forces of which are calculated from the real tyre sensor estimates. The Kalman filter estimator for lateral vehicle state based on measured tyre forces is presented, together with a simple method to define adaptive measurement error covariance depending on the driving condition of the vehicle. The estimated yaw rate and lateral velocity are compared with the validation sensor measurements.

  2. Indoor Air Quality In Maine Schools: Report of the Task Force To Examine the Establishment and Implementation of State Standards for Indoor Air Quality in Maine Schools.

    Science.gov (United States)

    Malcolm, Judith

    Asserting that in Maine and across the nation, school buildings are becoming increasingly plagued with indoor air quality (IAQ) problems which contribute to a variety of illnesses in children and adults, this report from a Maine state legislative task force identifies appropriate policies and identifies actions necessary for the prevention and…

  3. Effects of forced convection of heated air on insensible water loss and heat loss in preterm infants in incubators.

    Science.gov (United States)

    Okken, A; Blijham, C; Franz, W; Bohn, E

    1982-07-01

    To assess the effect of forced convection of heated air exchange in preterm infants in conventional incubators, we measured insensible water loss and total heat loss in preterm infants in a conventional forced convection incubator (air velocity 15 to 25 cm/second) and in a specially constructed still-air incubator (air velocity 0 to 2 cm/second) at equal operative temperature and humidity. Under the forced conditions, insensible water loss in the preterm infants increased by a mean 52% from 1.04 +/- 0.24 (mean +/- SD) to 1.58 +/- 0.51 ml/kg/hour (P less than 0.001). The ensuing increase in evaporative heat loss was partly reflected in the small but significant increase in total heat loss from 1.65 +/- 0.47 to 1.80 +/- 0.44 kcal/kg/hour (P less than 0.02). In the forced convection incubator, the increased evaporative heat loss in preterm infants was apparently partly compensated by a decreased nonevaporative heat loss. If reduction of insensible water loss is required, preterm infants should not be subjected to forced convection in incubators.

  4. Air Force Technical Objective Document (TOD) C(3)I (command, control, communications and intelligence) - fiscal year 1985

    Science.gov (United States)

    Crocetti, C. P.

    1983-12-01

    This TOD describes the technical programs of the Rome Air Development Center in support of the Air Force Command, Control, Communications, and Intelligence (C3I) mission. The technical objectives have been aligned with the VANGUARD mission areas of Command, Control, and Communications (C3), Reconnaissance and Intelligence, Strategic Systems (Defense), and Technology as a means of focusing the RADC support of VANGUARD. This document is prepared to provide industry and universities with the midterm technical objectives in these areas.

  5. STEAM INJECTION INTO FRACTURED LIMESTONE AT LORING AIR FORCE BASE

    Science.gov (United States)

    A research project on steam injection for the remediation of spent chlorinated solvents from fractured limestone was recently undertaken at the former Loring AFB in Limestone, ME. Participants in the project include the Maine Department of Environmental Protection, EPA Region I,...

  6. Indoor air quality analysis based on Hadoop

    International Nuclear Information System (INIS)

    The air of the office environment is our research object. The data of temperature, humidity, concentrations of carbon dioxide, carbon monoxide and ammonia are collected peer one to eight seconds by the sensor monitoring system. And all the data are stored in the Hbase database of Hadoop platform. With the help of HBase feature of column-oriented store and versioned (automatically add the time column), the time-series data sets are bulit based on the primary key Row-key and timestamp. The parallel computing programming model MapReduce is used to process millions of data collected by sensors. By analysing the changing trend of parameters' value at different time of the same day and at the same time of various dates, the impact of human factor and other factors on the room microenvironment is achieved according to the liquidity of the office staff. Moreover, the effective way to improve indoor air quality is proposed in the end of this paper

  7. Indoor air quality analysis based on Hadoop

    Science.gov (United States)

    Tuo, Wang; Yunhua, Sun; Song, Tian; Liang, Yu; Weihong, Cui

    2014-03-01

    The air of the office environment is our research object. The data of temperature, humidity, concentrations of carbon dioxide, carbon monoxide and ammonia are collected peer one to eight seconds by the sensor monitoring system. And all the data are stored in the Hbase database of Hadoop platform. With the help of HBase feature of column-oriented store and versioned (automatically add the time column), the time-series data sets are bulit based on the primary key Row-key and timestamp. The parallel computing programming model MapReduce is used to process millions of data collected by sensors. By analysing the changing trend of parameters' value at different time of the same day and at the same time of various dates, the impact of human factor and other factors on the room microenvironment is achieved according to the liquidity of the office staff. Moreover, the effective way to improve indoor air quality is proposed in the end of this paper.

  8. Impacts of urban land-surface forcing on ozone air quality in the Seoul metropolitan area

    Directory of Open Access Journals (Sweden)

    Y.-H. Ryu

    2013-02-01

    Full Text Available Modified local meteorology owing to heterogeneities in the urban–rural surface can affect urban air quality. In this study, the impacts of urban land-surface forcing on ozone air quality during a high ozone (O3 episode in the Seoul metropolitan area, South Korea, are investigated using a high-resolution chemical transport model (CMAQ. Under fair weather conditions, the temperature excess (urban heat island significantly modifies boundary layer characteristics/structures and local circulations. The modified boundary layer and local circulations result in an increase in O3 levels in the urban area of 16 ppb in the nighttime and 13 ppb in the daytime. Enhanced turbulence in the deep urban boundary layer dilutes pollutants such as NOx, and this contributes to the elevated O3 levels through the reduced O3 destruction by NO in the NOx-rich environment. The advection of O3 precursors over the mountains near Seoul by the prevailing valley-breeze circulation in the mid- to late morning results in the build-up of O3 over the mountains in conjunction with biogenic volatile organic compound (BVOC emissions there. As the prevailing local circulation in the afternoon changes to urban-breeze circulation, the O3-rich air masses over the mountains are advected over the urban area. The urban-breeze circulation exerts significant influences on not only the advection of O3 but also the chemical production of O3 under the circumstances in which both anthropogenic and biogenic (natural emissions play important roles in O3 formation. As the air masses that are characterized by low NOx and high BVOC levels and long OH chain length are advected over the urban area from the surroundings, the ozone production efficiency increases in the urban area. The relatively strong vertical mixing in the urban boundary layer embedded in the

  9. AFM-based force microsensor for a microrobot

    Science.gov (United States)

    Fatikow, Sergej; Fahlbusch, Stephan

    2001-10-01

    Microrobots are the result of increasing research activities at the border between microsystem technology and robotics. Today already, robots with dimensions of a few cubic- centimeters can be developed. Like conventional robots, microrobots represent a complex system that usually contains several different types of actuators and sensors. The measurement of gripping forces is the most important sensor application in micromanipulation besides visual servoing to protect the parts from too high surface pressures and thereby damage during the assembly process. Very small forces in the range of 200 (mu) N down to 0.1 (mu) N or even less have to be sensed. Thus, the aim of our current research activities is the development of a high-resolution integrated force microsensor for measuring gripping forces in a microhandling robot. On the one hand, the sensor should be a device for teleoperated manipulation tasks in a flexible microhandling station. On the other hand, typical microhandling operations should to a large extend be automated with the aid of computer-based signal processing of sensor information. The user should be provided with an interface for teleoperated manipulation and an interface for partially automated manipulation of microobjects. In this paper, a concept for the measurement of gripping forces in microrobotics using piezoresistive AFM (atomic force microscope) cantilevers is introduced. Further on, the concept of a microrobot-based SEM station and its applications are presented.

  10. Micro-Vibration-Based Slip Detection in Tactile Force Sensors

    Directory of Open Access Journals (Sweden)

    Raul Fernandez

    2014-01-01

    Full Text Available Tactile sensing provides critical information, such as force, texture, shape or temperature, in manipulation tasks. In particular, tactile sensors traditionally used in robotics are emphasized in contact force determination for grasping control and object recognition. Nevertheless, slip detection is also crucial to successfully manipulate an object. Several approaches have appeared to detect slipping, the majority being a combination of complex sensors with complex algorithms. In this paper, we deal with simplicity, analyzing how a novel, but simple, algorithm, based on micro-vibration detection, can be used in a simple, but low-cost and durable, force sensor. We also analyze the results of using the same principle to detect slipping in other force sensors based on flexible parts. In particular, we show and compare the slip detection with: (i a flexible finger, designed by the authors, acting as a force sensor; (ii the finger torque sensor of a commercial robotic hand; (iii a commercial six-axis force sensor mounted on the wrist of a robot; and (iv a fingertip piezoresistive matrix sensor.

  11. Longitudinal tire force estimation based on sliding mode observer

    Energy Technology Data Exchange (ETDEWEB)

    El Hadri, A.; Cadiou, J.C.; M' Sirdi, N.K. [Versailles Univ., Paris (France). Lab. de Robotique; Beurier, G.; Delanne, Y. [Lab. Central des Ponts, Centre de Nantes (France)

    2001-07-01

    This paper presents an estimation method for vehicle longitudinal dynamics, particularly the tractive/braking force. The estimation can be used to detect a critical driving situation to improve security. It can be used also in several vehicle control systems. The main characteristics of the vehicle longitudinal dynamics were taken into account in the model used to design an observer and computer simulations. The state variables are the angular wheel velocity, vehicle velocity and the longitudinal tire force. The proposed differential equation of the tractive/braking force is derived using the concept of relaxation length. The observer designed is based on the sliding mode approach using only the angular wheel velocity measurement. The proposed method of estimation is verified through a one-wheel simulation model with a ''Magic formula'' tire model. Simulations results show an excellent reconstruction of the tire force. (orig.)

  12. Scanning force microscopy at the air-water interface of an air bubble coated with pulmonary surfactant.

    OpenAIRE

    Knebel, D; Sieber, M; Reichelt, R.; Galla, H-J; Amrein, M

    2002-01-01

    To study the structure-function relationship of pulmonary surfactant under conditions close to nature, molecular films of a model system consisting of dipalmitoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, and surfactant-associated protein C were prepared at the air-water interface of air bubbles about the size of human alveoli (diameter of 100 microm). The high mechanical stability as well as the absence of substantial film flow, inherent to small air bubbles, allowed for scanning ...

  13. Mortality of Air Force veterans exposed to herbicides during the Vietnam War

    Energy Technology Data Exchange (ETDEWEB)

    Ketchum, N.; Michalek, J. [Air Force Research Laboratory, San Antonio, TX (United States)

    2004-09-15

    The long-term effects of herbicide exposure on human health are not fully known and remain controversial. Herbicides were used by US forces for defoliation and crop destruction during the Vietnam War. The toxic effects of 2,3,7,8-tetrachlorodibenzo-p-dioxin (dioxin), the contaminant found in Agent Orange and other herbicides sprayed during the war, continue to be of concern more than thirty years after the war. Studies of the post-service mortality experience of Vietnam veterans have given mixed results. The US Army Chemical Corps Study1 reported an increased risk of death due to digestive diseases and a non-significant increase in the risk of death from cancer. A study of Australian Army veterans reported an increased risk of death due to digestive diseases but no increases due to cancer. However, a study of women veterans3 found an increased risk of death due to pancreatic cancer and a study of Vietnam veterans from Michigan6 reported an excess of deaths due to non-Hodgkin's lymphoma. The Air Force Health Study is a prospective epidemiological study of the health, mortality and reproductive outcomes of veterans of Operation Ranch Hand, the unit responsible for aerially spraying herbicides in Vietnam from 1962 to 1971. The study, now in its 22{sup nd} year, began in 1982 and will conclude in 2006. Here we update our second report by summarizing current all-cause and cause-specific post-service mortality in veterans of Operation Ranch Hand.

  14. PHYTOREMEDIATION OF GROUNDWATER AT AIR FORCE PLANT 4, CARSWELL, TEXAS - INNOVATIVE TECHNOLOGY EVALUATION REPORT (CD-ROM)

    Science.gov (United States)

    Over 600 Cottonwood trees were planted over a shallow groundwater plume in an attempt to detoxify the tricWoroethylene (TCE) in a groundwater plume at a former Air Force facility. Two planting techniques were used: rooted stock about two years old, and 18 inch cuttings were insta...

  15. Victim, Perpetrator, Family, and Incident Characteristics of 32 Infant Maltreatment Deaths in the United States Air Force.

    Science.gov (United States)

    Brewster, Albert L.; Nelson, John P.; Hymel, Kent P.; Colby, Donald R.; Lucas, D. R.; McCanne, Thomas R.; Milner, Joel S.

    1998-01-01

    Using a multidisciplinary approach, victim, perpetrator, family, and incident variables in 32 cases of infanticide in U.S. Air Force families were examined. Findings were that 55% percent of infant-victims had physical trauma before the fatal incident, indicating physical abuse. The caretaker-perpetrator was usually male (84%), the biological…

  16. Smart Warriors: A Rationale for Educating Air Force Academy Cadets in the History of Science, Technology, and Warfare.

    Science.gov (United States)

    Astore, William J.

    2003-01-01

    Identifies enhancing the judgments of cadets through education at a military institution like the United States Air Force Academy (USAFA) as a crucial pedagogical issue facing instructors of History of Science and Technology (HST). Discusses the experience of helping cadets to meet such challenges in learning HST in the context of professional…

  17. Job Enrichment: Evaluation with Implications for Air Force Job Redesign. Interim Report, 1 January 1975-30 April 1977.

    Science.gov (United States)

    Watson, Thomas W.; Zumbro, Patrick A.

    The main text of this report consists of a review and evaluation of job enrichment as an approach to job redesign, with implications for Air Force research and application. In addition, two appendixes are included: the first, a supplemental historical discussion; the second, a ninety-six-item annotated bibliography. Specific objectives are to…

  18. Net radiative forcing and air quality responses to regional CO emission reductions

    Directory of Open Access Journals (Sweden)

    M. M. Fry

    2013-05-01

    Full Text Available Carbon monoxide (CO emissions influence global and regional air quality and global climate change by affecting atmospheric oxidants and secondary species. We simulate the influence of halving anthropogenic CO emissions globally and individually from 10 regions on surface and tropospheric ozone, methane, and aerosol concentrations using a global chemical transport model (MOZART-4 for the year 2005. Net radiative forcing (RF is then estimated using the GFDL (Geophysical Fluid Dynamics Laboratory standalone radiative transfer model. We estimate that halving global CO emissions decreases global annual average concentrations of surface ozone by 0.45 ppbv, tropospheric methane by 73 ppbv, and global annual net RF by 36.1 mW m−2, nearly equal to the sum of changes from the 10 regional reductions. Global annual net RF per unit change in emissions and the 100 yr global warming potential (GWP100 are estimated as −0.124 mW m−2 (Tg CO−1 and 1.34, respectively, for the global CO reduction, and ranging from −0.115 to −0.131 mW m−2 (Tg CO−1 and 1.26 to 1.44 across 10 regions, with the greatest sensitivities for regions in the tropics. The net RF distributions show widespread cooling corresponding to the O3 and CH4 decreases, and localized positive and negative net RFs due to changes in aerosols. The strongest annual net RF impacts occur within the tropics (28° S–28° N followed by the northern midlatitudes (28° N–60° N, independent of reduction region, while the greatest changes in surface CO and ozone concentrations occur within the reduction region. Some regional reductions strongly influence the air quality in other regions, such as East Asia, which has an impact on US surface ozone that is 93% of that from North America. Changes in the transport of CO and downwind ozone production clearly exceed the direct export of ozone from each reduction region. The small variation in CO GWPs among world regions suggests that future international

  19. Net radiative forcing and air quality responses to regional CO emission reductions

    Directory of Open Access Journals (Sweden)

    M. M. Fry

    2012-12-01

    Full Text Available Carbon monoxide (CO emissions influence global and regional air quality and global climate change by affecting atmospheric oxidants and secondary species. We simulate the influence of halving anthropogenic CO emissions globally and individually from 10 regions on surface and tropospheric ozone, methane, and aerosol concentrations using a global chemical transport model (MOZART-4 for the year 2005. Net radiative forcing (RF is then estimated using the GFDL standalone radiative transfer model. We estimate that halving global CO emissions decreases global annual average concentrations of surface ozone by 0.45 ppbv, tropospheric methane by 73 ppbv, and global annual net RF by 36.1 mW m−2, nearly equal to the sum of changes from the 10 regional reductions. Global annual net RF per unit change in emissions and the 100-yr global warming potential (GWP100 are estimated as −0.124 mW m−2 (Tg CO yr−1−1 and 1.34, respectively, for the global CO reduction, and ranging from −0.115 to −0.131 mW m−2 (Tg CO yr−1−1 and 1.26 to 1.44 across 10 regions, with the greatest sensitivities for regions in the tropics. The net RF distributions show widespread cooling corresponding to the O3 and CH4 decreases, and localized positive and negative net RFs due to changes in aerosols. The strongest annual net RF impacts occur within the tropics (28° S–28° N followed by the northern mid-latitudes (28° N–60° N, independent of reduction region, while the greatest changes in surface CO and ozone concentrations occur within the reduction region. Some regional reductions strongly influence the air quality in other regions, such as East Asia, which has an impact on US surface ozone that is 93% of that from North America. Changes in the transport of CO and downwind ozone production clearly exceed the direct export of ozone from each reduction region

  20. Air Quality Monitoring: Risk-Based Choices

    Science.gov (United States)

    James, John T.

    2009-01-01

    Air monitoring is secondary to rigid control of risks to air quality. Air quality monitoring requires us to target the credible residual risks. Constraints on monitoring devices are severe. Must transition from archival to real-time, on-board monitoring. Must provide data to crew in a way that they can interpret findings. Dust management and monitoring may be a major concern for exploration class missions.

  1. The effect of electrostatic force on air filtration by polypropylene filter media

    International Nuclear Information System (INIS)

    In this paper, the effect of irradiation with 60Co on the efficiency and strength of the polypropylene filter media is mainly researched. The charge density of polypropylene fibre is evaluated by radiation discharge method. Based on isolated cylinder model, the efficiency of the polypropylene filter media, which takes account of the effect of impaction, interception, diffusion and electrostatic, is calculated. A better agreement between theoretical analysis and experimental results is obtained. The results indicate that electrostatic force is the most important factor in solid aerosol filtration of the polypropylene filter media

  2. System of gait analysis based on ground reaction force assessment

    Directory of Open Access Journals (Sweden)

    František Vaverka

    2015-12-01

    Full Text Available Background: Biomechanical analysis of gait employs various methods used in kinematic and kinetic analysis, EMG, and others. One of the most frequently used methods is kinetic analysis based on the assessment of the ground reaction forces (GRF recorded on two force plates. Objective: The aim of the study was to present a method of gait analysis based on the assessment of the GRF recorded during the stance phase of two steps. Methods: The GRF recorded with a force plate on one leg during stance phase has three components acting in directions: Fx - mediolateral, Fy - anteroposterior, and Fz - vertical. A custom-written MATLAB script was used for gait analysis in this study. This software displays instantaneous force data for both legs as Fx(t, Fy(t and Fz(t curves, automatically determines the extremes of functions and sets the visual markers defining the individual points of interest. Positions of these markers can be easily adjusted by the rater, which may be necessary if the GRF has an atypical pattern. The analysis is fully automated and analyzing one trial takes only 1-2 minutes. Results: The method allows quantification of temporal variables of the extremes of the Fx(t, Fy(t, Fz(t functions, durations of the braking and propulsive phase, duration of the double support phase, the magnitudes of reaction forces in extremes of measured functions, impulses of force, and indices of symmetry. The analysis results in a standardized set of 78 variables (temporal, force, indices of symmetry which can serve as a basis for further research and diagnostics. Conclusions: The resulting set of variable offers a wide choice for selecting a specific group of variables with consideration to a particular research topic. The advantage of this method is the standardization of the GRF analysis, low time requirements allowing rapid analysis of a large number of trials in a short time, and comparability of the variables obtained during different research measurements.

  3. Air Force Research Laboratory Spacecraft Cryocooler Endurance Evaluation Facility Closing Report

    Science.gov (United States)

    Armstrong, J.; Martin, K. W.; Fraser, T.

    2015-12-01

    The Air Force Research Laboratory (AFRL) Spacecraft Component Thermal Research Group has been devoted to evaluating lifetime performance of space cryocooler technology for over twenty years. Long-life data is essential for confirming design lifetimes for space cryocoolers. Continuous operation in a simulated space environment is the only accepted method to test for degradation. AFRL has provided raw data and detailed evaluations to cryocooler developers for advancing the technology, correcting discovered deficiencies, and improving cryocooler designs. At AFRL, units of varying design and refrigeration cycles were instrumented in state-of-the-art experiment stands to provide spacelike conditions and were equipped with software data acquisition to track critical cryocooler operating parameters. This data allowed an assessment of the technology's ability to meet the desired lifetime and documented any long-term changes in performance. This paper will outline a final report of the various flight cryocoolers tested in our laboratory. The data summarized includes the seven cryocoolers tested during 2014-2015. These seven coolers have a combined total of 433,326 hours (49.5 years) of operation.

  4. Status of Obesity in Terms of Body Mass Index among Indian Air Force Personnel

    Directory of Open Access Journals (Sweden)

    L. Robert Varte

    2011-10-01

    Full Text Available Introduction: This paper investigates the prevalence of obesity (BMI >30 kg/m2 among five geographical groups of Indian Air Force personnel of different age. Purpose of study: To observe the status of obesity among IAF and see whether there is age-wise and regional difference in obesity among the different geographical groups. Results: Gradual increase in mean BMI is seen as age of the population increases. There is an overall marked increase in BMI level among all the three age groups for all the other four zones. F-ratio test of normal range BMI does show significant difference among the zones. There is a statistically significant difference in normal BMI (18.5–24.9 wt/ht2 among all the age groups (F-ratio=11.561, p < 0.05. BMI correlated positively with age in the 20-25 age groups (r = 0.119, p= 0.000 and 26-30 age groups (r = 0.075, p= 0.009 respectively, but BMI did not show any statistically significant correlation with age in the 31-35 age group. Observations: A marked increase in overweight and pre-obese prevalence is seen both age and region wise in the IAF personnel if the Asian BMI cut off levels are applied

  5. Validation and Verification of Operational Land Analysis Activities at the Air Force Weather Agency

    Science.gov (United States)

    Shaw, Michael; Kumar, Sujay V.; Peters-Lidard, Christa D.; Cetola, Jeffrey

    2012-01-01

    The NASA developed Land Information System (LIS) is the Air Force Weather Agency's (AFWA) operational Land Data Assimilation System (LDAS) combining real time precipitation observations and analyses, global forecast model data, vegetation, terrain, and soil parameters with the community Noah land surface model, along with other hydrology module options, to generate profile analyses of global soil moisture, soil temperature, and other important land surface characteristics. (1) A range of satellite data products and surface observations used to generate the land analysis products (2) Global, 1/4 deg spatial resolution (3) Model analysis generated at 3 hours. AFWA recognizes the importance of operational benchmarking and uncertainty characterization for land surface modeling and is developing standard methods, software, and metrics to verify and/or validate LIS output products. To facilitate this and other needs for land analysis activities at AFWA, the Model Evaluation Toolkit (MET) -- a joint product of the National Center for Atmospheric Research Developmental Testbed Center (NCAR DTC), AFWA, and the user community -- and the Land surface Verification Toolkit (LVT), developed at the Goddard Space Flight Center (GSFC), have been adapted to operational benchmarking needs of AFWA's land characterization activities.

  6. The Campus-Based Formula. NASFAA Task Force Report

    Science.gov (United States)

    National Association of Student Financial Aid Administrators, 2014

    2014-01-01

    The primary purpose of the National Association of Student Financial Aid Administrators (NASFAA) Campus-Based Aid Allocation Task Force was to examine the formula by which congressional appropriations for the Federal Supplemental Educational Opportunity Grant (FSEOG), Federal Work-Study (FWS), and Perkins Loan programs are distributed to schools,…

  7. AFWL (Air Force Weapons Laboratory) HULL (Hydrodynamics Unlimited) calculations of air blast over a dam slope. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fry, M.A.; Needham, C.E.; Stucker, M.; Chambers, B.S.; Ganong, G.P.

    1976-10-01

    This laboratory performed Hydrodynamics Unlimited (HULL) calculations of the air blast over a dam for two yields and two pressure regions. A 5th calculation included a rigid blockhouse at the foot of the dam. Although the shielding effect of the dam reduced the incident blast wave overpressure, reflection of the shock from the valley floor raised the peak overpressure up to at least 40% of the free air value. In almost every case, the overpressure impulses near the foot of the dam were greater than or equal to free air values. The rigid blockhouse experienced the most severe overpressure environments. The assumption of a 50-psi hard blockhouse is reasonable. During collapse of the blockhouse, it appears to be rigid to the air flow, since it responds slowly to the rapid air blast. Although there may be other reasons to detonate the weapon on the surface of the reservoir, the best way to destroy the blockhouse and any related structures with air blast, probably would be to detonate the device downstream of the blockhouse.

  8. A dual pore carbon aerogel based air cathode for a highly rechargeable lithium-air battery

    OpenAIRE

    Wang, Fang; Xu, Yang-Hai; Luo, Zhong-Kuan; PANG, YAN; Liang, Chun-Sheng; Chen, Jing; Liu, Dong; Zhang, Xianghua

    2014-01-01

    International audience Cathode structure plays a vital role in lithium-air battery for that it can provide space for discharged products accommodation and free path for oxygen, e− and Li+ transport. However, pore blockage, cathode passivation and degradation all result in low discharge rates and poor cycling capability. To get rid of these predicaments, a novel highly conductive dual pore carbon aerogel based air cathode is fabricated to construct a lithium-air battery, which exhibits 18 t...

  9. Analytical model for estimating drag forces on rigid submerged structures caused by LOCA and safety relief valve ramshead air discharges. [BWR

    Energy Technology Data Exchange (ETDEWEB)

    1977-09-01

    Basic information is presented for estimating drag forces on rigid structural members submerged in a pressure suppression pool, caused by either the air discharge from a loss-of-coolant accident (LOCA), or the air bubble oscillation following safey relief valve ramshead discharge. Methods are described for estimating acceleration (unsteady) and standard (velocity-squared) drag force components for a variety of structural geometries.

  10. A hybrid thermal management system for lithium ion batteries combining phase change materials with forced-air cooling

    International Nuclear Information System (INIS)

    Highlights: • Heat accumulation in PCM causes failures of passive thermal management systems. • The introduction of forced air convection improves the reliability of PCMs. • Temperature distribution in the hybrid system remains uniform. • Active cooling and PCMs play separate roles in battery thermal management. • Numerical results agree with experiment data and give theoretic insights. - Abstract: Passive thermal management systems using phase change materials (PCMs) provides an effective solution to the overheating of lithium ion batteries. But this study shows heat accumulation in PCMs caused by the inefficient cooling of air natural convection leads to thermal management system failures: The temperature in a battery pack operating continuously outranges the safety limit of 60 °C after two cycles with discharge rate of 1.5 C and 2 C. Here a hybrid system that integrates PCMs with forced air convection is presented. This combined system successfully prevents heat accumulation and maintains the maximum temperature under 50 °C in all cycles. Study on airspeed effects reveals that thermo-physical properties of PCMs dictate the maximum temperature rise and temperature uniformity in the battery pack, while forced air convection plays a critical role in recovering thermal energy storage capacity of PCMs. A numerical study is also carried out and validated with experiment data, which gives theoretic insights on thermo-physical changes in this hybrid battery thermal management system

  11. Aircraft vibration and other factors related to high systolic blood pressure in Indonesian Air Force pilots

    Directory of Open Access Journals (Sweden)

    Minarma Siagian

    2013-05-01

    Indonesian Air Force pilots doing annual medical check-ups at the Saryanto Institute for Medical and Health Aviation and Aerospace (LAKESPRA from 2003 – 2008. The data extracted from medical records were age, total flight hours, type of aircraft, fasting blood glucose and cholesterol levels, waist circumference, height and weight (Body Mass Index, and blood pressure.Results: Of 336 pilots, there were 16 with systolic pressure  140 mmHg. The pilot who had high vibration than low vibration had 2.8-fold to be high systolic blood pressure [adjusted odds ratio (ORa = 2.83; 95%confidence interval (CI =1.16-22.04. In term of average flight hours, those who had average flight hours of 300-622 hours per year compared to 29-299 hours per year had 5-fold increased risk to be high systolic blood pressure (ORa = 5.05; 95% CI =1.16-22.04]. Furthermore, those who had high than normal resting pulse rate had 2.4 times to be high systolic blood pressure (ORa = 2.37; 95 CI =0.81-6.97; P = 0.115.Conclusion:High aircraft vibration, high average flight hours per year, and high resting pulse rate increase risk high systolic blood pressure in air force pilots.Keywords: systolic blood pressure, aircraft vibration, resting pulse rate, pilots

  12. Field Measurements of Heating Efficiency of Electric Forced-Air Furnaces in Six Manufactured Homes.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Bob; Palmiter, Larry S.; Siegel, Jeff

    1994-07-26

    This report presents the results of field measurements of heating efficiency for six manufactured homes in the Pacific Northwest heated with electric forced-air systems. This is the first in a series of regional and national efforts to measure in detail the heating efficiency of manufactured homes. Only six homes were included in this study because of budgetary constraints; therefore this is not a representative sample. These investigations do provide some useful information on the heating efficiency of these homes. Useful comparisons can be drawn between these study homes and site-built heating efficiencies measured with a similar protocol. The protocol used to test these homes is very similar to another Ecotope protocol used in the study conducted in 1992 and 1993 for the Bonneville Power Administration to test the heating efficiency of 24 homes. This protocol combined real-time power measurements of furnace energy usage with energy usage during co-heat periods. Accessory data such as house and duct tightness measurements and tracer gas measurements were used to describe these homes and their heating system efficiency. Ensuring that manufactured housing is constructed in an energy and resource efficient manner is of increasing concern to manufactured home builders and consumers. No comparable work has been done to measure the heating system efficiency of MCS manufactured homes, although some co-heat tests have been performed on manufactured homes heated with natural gas to validate HUD thermal standards. It is expected that later in 1994 more research of this kind will be conducted, and perhaps a less costly and less time-consuming method for testing efficiencies will be develops.

  13. Prevalence of permanent threshold shifts in the United States Air Force hearing conservation program by career field, 2005-2011.

    Science.gov (United States)

    Lloyd Soderlund, Laurel; McKenna, Elizabeth A; Tastad, Katie; Paul, Marika

    2016-01-01

    The purpose of this study was to describe changes in hearing, using the permanent threshold shift metric, among United States Air Force servicemembers, including active duty, Reserve and Air National Guard components, for demographics, job categories, and career fields. In the United States Air Force, only servicemembers who are occupationally exposed routinely to hazardous noise are monitored. Audiogram records and demographic variables were analyzed for servicemembers from 2005-2011 using data from the Department of Defense system that captures occupational hearing tests worldwide. Results suggest that occupational hearing loss was larger in males than females, in officers than enlisted populations, and in Reserve and Air National Guard than in active duty. Compared to similar civilian career fields, active duty has lower prevalence rates for occupational hearing loss overall, although Reserve and Air National Guard prevalence rates were more similar to the civilian reported rates. The proportion of personnel with permanent threshold shifts varied between 4.6-16.7% within active duty career fields, which includes 76% of the population for study timeframe. Permanent threshold shift was larger in small job categories, and in jobs that are not considered exposed to hazardous noise routinely which is comparative with results from civilian data analysis of occupational hearing loss. Further investigation into testing practices for Air Force specific groups, use of the system for nonoccupational hearing testing, and challenges to follow-up compliance is warranted. Increased surveillance procedures for occupational hearing loss are needed to address concerns on the prevalence of servicemember hearing loss, the role of recreational and lifestyle factors to contribute the high reported hearing loss prevalence of veterans compared to nonveterans. PMID:26720128

  14. Evaluation of AirGIS: a GIS-based air pollution and human exposure modelling system

    DEFF Research Database (Denmark)

    Ketzel, Matthias; Berkowicz, Ruwim; Hvidberg, Martin;

    2011-01-01

    This study describes in brief the latest extensions of the Danish Geographic Information System (GIS)-based air pollution and human exposure modelling system (AirGIS), which has been developed in Denmark since 2001 and gives results of an evaluation with measured air pollution data. The system...... shows, in general, a good performance for both long-term averages (annual and monthly averages), short-term averages (hourly and daily) as well as when reproducing spatial variation in air pollution concentrations. Some shortcomings and future perspectives of the system are discussed too....

  15. A novel, fuzzy-based air quality index (FAQI) for air quality assessment

    Science.gov (United States)

    Sowlat, Mohammad Hossein; Gharibi, Hamed; Yunesian, Masud; Tayefeh Mahmoudi, Maryam; Lotfi, Saeedeh

    2011-04-01

    The ever increasing level of air pollution in most areas of the world has led to development of a variety of air quality indices for estimation of health effects of air pollution, though the indices have their own limitations such as high levels of subjectivity. Present study, therefore, aimed at developing a novel, fuzzy-based air quality index (FAQI ) to handle such limitations. The index developed by present study is based on fuzzy logic that is considered as one of the most common computational methods of artificial intelligence. In addition to criteria air pollutants (i.e. CO, SO 2, PM 10, O 3, NO 2), benzene, toluene, ethylbenzene, xylene, and 1,3-butadiene were also taken into account in the index proposed, because of their considerable health effects. Different weighting factors were then assigned to each pollutant according to its priority. Trapezoidal membership functions were employed for classifications and the final index consisted of 72 inference rules. To assess the performance of the index, a case study was carried out employing air quality data at five different sampling stations in Tehran, Iran, from January 2008 to December 2009, results of which were then compared to the results obtained from USEPA air quality index (AQI). According to the results from present study, fuzzy-based air quality index is a comprehensive tool for classification of air quality and tends to produce accurate results. Therefore, it can be considered useful, reliable, and suitable for consideration by local authorities in air quality assessment and management schemes. Fuzzy-based air quality index (FAQI).

  16. Upper limits for air humidity based on human comfort

    DEFF Research Database (Denmark)

    Toftum, Jørn; Fanger, Povl Ole; Jørgensen, Anette S.

    1998-01-01

    respiratory cooling. Human subjects perceived the condition of their skin to be less acceptable with increasing skin humidity. Inhaled air was rated warmer, more stuffy and less acceptable with increasing air humidity and temperature. Based on the subjects' comfort responses, new upper limits for air humidity......The purpose of this study was to verify the hypothesis that insufficient respiratory cooling and a high level of skin humidity are two reasons for thermal discomfort at high air humidities, and to prescribe upper limits for humidity based on discomfort due to elevated skin humidity and insufficient...... are proposed. The limits relating to respiratory requirements are much more stringent than those relating to skin humidity....

  17. Public Outreach From the Physics Department at the Air Force Academy: Engaging the Faculty as Scientists and Partners

    Science.gov (United States)

    Knipp, D. J.; Kutche, C.

    2001-05-01

    The Air Force Academy serves a specialized function as a developer of military officers preparing to lead the nation's air and space forces. Within the Academy, the Physics department focuses on providing a breadth of integrated knowledge in physics and meteorology. To that end technical competency and scientific literacy of both incoming and outgoing students is a significant issue. Despite limited outreach resources, the Physics faculty and staff are very active in K-12 science education and in enhancing general science literacy via public outreach to the community. The department supports more than 1500 public outreach contacts per year. Teachers at all levels are involved in a variety of interactions: one-on-one mentoring, class-to-class pairings of elementary and college physics students, motivational "Physics is Phun" school visits, and numerous activities on the Academy grounds. In this presentation we will discuss the breadth of outreach activities and how they relate the research emphasis areas of the Academy's Physics Department.

  18. Modeling the forced-air cooling process of fresh strawberry packages, Part II: Experimental validation of the flow model

    Energy Technology Data Exchange (ETDEWEB)

    Ferrua, M.J.; Singh, R.P. [Department of Biological and Agricultural Engineering, University of California at Davis, One Shields Avenue, Davis, CA 95616 (United States)

    2009-03-15

    The aim of this study was to validate a previously developed mathematical model for predicting the airflow behavior within individual packages of strawberries (clamshells) during forced-air cooling applications. The model was validated by using a non-intrusive flow measurement technique (PIV). The use of PIV required the development of a simplified transparent system that reproduces the packaging structure of typical retail clamshells. The validation was achieved by comparing the velocity field predicted by the model within this system against experimental data. The model not only predicted the main flow features, but also the location of steep acceleration within the packed structure voids. This work shows that, assuming that the momentum transport can be decoupled from the transport of energy and mass during forced-air cooling applications, the steady-state Navier-Stokes equations can accurately predict the airflow within individual clamshells of strawberries. (author)

  19. Modeling the forced-air cooling process of fresh strawberry packages, Part III: Experimental validation of the energy model

    Energy Technology Data Exchange (ETDEWEB)

    Ferrua, M.J.; Singh, R.P. [Department of Biological and Agricultural Engineering, University of California at Davis, One Shields Avenue, Davis, CA 95616 (United States)

    2009-03-15

    The aim of this study was to validate a mathematical model previously developed for predicting the cooling rate of individual packages of strawberries (clamshells) during an industrial forced-air cooling application. The differences between the predicted and experimental profiles of the average-fruit temperature per clamshell were less than 0.7 C (within the limits of the experimental uncertainty). The 7/8th cooling time of individual clamshells was predicted within less than 3% of the experimental value. In addition, the local performance of the model and its capability to predict the strawberry moisture loss were qualitatively analyzed. The moisture loss was predicted between 73% and 88% of the experimental value. The predicted temperature profile of individual fruits and airflow within clamshells followed the general trends experimentally determined. Finally, the results corroborated that the transport phenomena during force-air cooling applications can be modeled by decoupling the momentum transport from the transport of energy and mass. (author)

  20. Developing a Peak Wind Probability Forecast Tool for Kennedy Space Center and Cape Canaveral Air Force Station

    Science.gov (United States)

    Lambert, WInifred; Roeder, William

    2007-01-01

    This conference presentation describes the development of a peak wind forecast tool to assist forecasters in determining the probability of violating launch commit criteria (LCC) at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) in east-central Florida. The peak winds are an important forecast element for both the Space Shuttle and Expendable Launch Vehicle (ELV) programs. The LCC define specific peak wind thresholds for each launch operation that cannot be exceeded in order to ensure the safety of the vehicle. The 45th Weather Squadron (45 WS) has found that peak winds are a challenging parameter to forecast, particularly in the cool season months of October through April. Based on the importance of forecasting peak winds, the 45 WS tasked the Applied Meteorology Unit (AMU) to develop a short-range peak-wind forecast tool to assist in forecasting LCC violations. The tool will include climatologies of the 5-minute mean and peak winds by month, hour, and direction, and probability distributions of the peak winds as a function of the 5-minute mean wind speeds.

  1. Reassessment of psychological distress and post-traumatic stress disorder in United States Air Force Distributed Common Ground System operators.

    Science.gov (United States)

    Prince, Lillian; Chappelle, Wayne L; McDonald, Kent D; Goodman, Tanya; Cowper, Sara; Thompson, William

    2015-03-01

    The goal of this study was to assess for the main sources of occupational stress, as well as self-reported symptoms of distress and post-traumatic stress disorder among U.S. Air Force (USAF) Distributed Common Ground System (DCGS) intelligence exploitation and support personnel. DCGS intelligence operators (n=1091) and nonintelligence personnel (n = 447) assigned to a USAF Intelligence, Surveillance, and Reconnaissance Wing responded to the web-based survey. The overall survey response rate was 31%. Study results revealed the most problematic stressors among DCGS intelligence personnel included high workload, low manning, as well as organizational leadership and shift work issues. Results also revealed 14.35% of DCGS intelligence operators' self-reported high levels of psychological distress (twice the rate of DCGS nonintelligence support personnel). Furthermore, 2.0% to 2.5% self-reported high levels of post-traumatic stress disorder symptoms, with no significant difference between groups. The implications of these findings are discussed along with recommendations for USAF medical and mental health providers, as well as operational leadership. PMID:25747649

  2. An EGaIn-based flexible piezoresistive shear and normal force sensor with hysteresis analysis in normal force direction

    Science.gov (United States)

    Shi, Xiaomei; Cheng, Ching-Hsiang; Zheng, Yongping; Wai, P. K. A.

    2016-10-01

    This paper reports a flexible piezoresistive shear and normal force sensor based on eutectic gallium-indium (EGaIn) with fabrication and testing results, which includes further study on the hysteresis analysis in the normal force direction. By using EGaIn as a gauge material, it can detect force on a flexible and stretchable substrate without breaking the gauge wires. However, the liquid-metal gauge wire needs to be packaged and protected in an elastomeric substrate, which creates hysteresis on the sensed resistance with respect to the change of applied force. This paper shows measurement results in static force and also under different speeds of loading force cycles. The relationship between the applied normal force and hysteresis of signal was observed, mainly owing to larger deformation and slower recovering time of the elastomeric substrate that defines the shape of the liquid-metal gauge wire for resistance measurement.

  3. Effects of war exposure on Air Force personnel’s mental health, job burnout and other organizational related outcomes

    OpenAIRE

    Vinokur, Amiram D.; Pierce, Penny F.; Lewandowski-Romps, Lisa; Hobfoll, Stevan E.; Galea, Sandro

    2011-01-01

    Longitudinal data from a stratified representative sample of U.S. Air Force personnel (N = 1009) deployed to the wars in Iraq, Afghanistan, and other locations were analyzed in this study. Using structural equation models, we examined the effects of war exposure on traumatic experiences, Post Traumatic Stress (PTS) symptoms, resource loss, and on subsequent functioning, perceived health, and on job and organizationally relevant outcomes. The job and organizational outcomes included job burnou...

  4. Effects of Urban Land Forcing on Local and Downwind Air Quality, a Case Study for East Asia

    Science.gov (United States)

    Wei, T.; Liu, J.; Ban-Weiss, G. A.

    2015-12-01

    Urban land surfaces are distinct from natural surfaces as their unique radiative, thermal, hydrologic and aerodynamic properties. In this study, we have investigated the response of a range of meteorological and air quality indicators to urban land expansion based on the Weather Research and Forecasting model coupled with chemistry (WRF/Chem). Specifically, we simulate the climate and air quality impacts of four hypothetical urbanization scenarios during the month of July from 2008 to 2012 over eastern China, a region experiencing the fastest urbanization. We find that as urban land expanses, though emissions are held constant, concentrations of CO, elemental carbon (EC), and PM2.5 tend to decrease near the surface (below ~500 m), but increase at higher altitudes (1-3 km), resulting in a reduced vertical concentration gradient. On the contrary, the O3 burden averaged over all newly urbanized grid cells consistently increases from the surface to a height of about 4 km. The responses of pollutant concentrations to the spatial extent of urbanization are linear near the surface, but nonlinear (or intensified) at higher altitudes. The perturbations in boundary layer height, 2-m temperature and 2-m relative humidity also increase linearly with the spatial extent of urban land expansion (R2 >0.96). Our work indicates that as large tracts of new urban land emerge, the influence of urban expansion on meteorology and air pollution would be significantly amplified. An improved integrated process rate (IPR) analysis scheme is implemented in WRF/Chem to investigate the non-negligible and unique role of urban land forcing in impacting the advection, turbulent mixing, and dry/wet removal of pollutants. IPR indicates that, for primary pollutants, the enhanced sink (source) caused by turbulent mixing and vertical advection in the lower (upper) atmosphere could be a key factor in changes to simulated vertical profiles. The evolution of secondary pollutants is further largely

  5. Solar Cycle and Anthropogenic Forcing of Surface-Air Temperature at Armagh Observatory, Northern Ireland

    Science.gov (United States)

    Wilson, Robert M.

    2010-01-01

    A comparison of 10-yr moving average (yma) values of Armagh Observatory (Northern Ireland) surface-air temperatures with selected solar cycle indices (sunspot number (SSN) and the Aa geomagnetic index (Aa)), sea-surface temperatures in the Nino 3.4 region, and Mauna Loa carbon dioxide (CO2) (MLCO2) atmospheric concentration measurements reveals a strong correlation (r = 0.686) between the Armagh temperatures and Aa, especially, prior to about 1980 (r = 0.762 over the interval of 1873-1980). For the more recent interval 1963-2003, the strongest correlation (r = 0.877) is between Armagh temperatures and MLCO2 measurements. A bivariate fit using both Aa and Mauna Loa values results in a very strong fit (r = 0.948) for the interval 1963-2003, and a trivariate fit using Aa, SSN, and Mauna Loa values results in a slightly stronger fit (r = 0.952). Atmospheric CO2 concentration now appears to be the stronger driver of Armagh surface-air temperatures. An increase of 2 C above the long-term mean (9.2 C) at Armagh seems inevitable unless unabated increases in anthropogenic atmospheric gases can be curtailed. The present growth in 10-yma Armagh temperatures is about 0.05 C per yr since 1982. The present growth in MLCO2 is about 0.002 ppmv, based on an exponential fit using 10-yma values, although the growth appears to be steepening, thus, increasing the likelihood of deleterious effects attributed to global warming.

  6. The US Air Force Aerial Spray Unit: a history of large area disease vector control operations, WWII through Katrina.

    Science.gov (United States)

    Breidenbaugh, Mark; Haagsma, Karl

    2008-01-01

    The US Air Force has had a long history of aerial applications of pesticides to fulfill a variety of missions, the most important being the protection of troops through the minimization of arthropod vectors capable of disease transmission. Beginning in World War II, aerial application of pesticides by the military has effectively controlled vector and nuisance pest populations in a variety of environments. Currently, the military aerial spray capability resides in the US Air Force Reserve (USAFR), which operates and maintains C-130 airplanes capable of a variety of missions, including ultra low volume applications for vector and nuisance pests, as well as higher volume aerial applications of herbicides and oil-spill dispersants. The USAFR aerial spray assets are the only such fixed-wing aerial spray assets within the Department of Defense. In addition to troop protection, the USAFR Aerial Spray Unit has participated in a number of humanitarian/relief missions, most recently in the response to the 2005 Hurricanes Katrina and Rita, which heavily damaged the Gulf Coasts of Louisiana, Mississippi, and Texas. This article provides historical background on the Air Force Aerial Spray Unit and describes the operations in Louisiana in the aftermath of Hurricane Katrina. PMID:20088030

  7. The US Air Force Aerial Spray Unit: a history of large area disease vector control operations, WWII through Katrina.

    Science.gov (United States)

    Breidenbaugh, Mark; Haagsma, Karl

    2008-01-01

    The US Air Force has had a long history of aerial applications of pesticides to fulfill a variety of missions, the most important being the protection of troops through the minimization of arthropod vectors capable of disease transmission. Beginning in World War II, aerial application of pesticides by the military has effectively controlled vector and nuisance pest populations in a variety of environments. Currently, the military aerial spray capability resides in the US Air Force Reserve (USAFR), which operates and maintains C-130 airplanes capable of a variety of missions, including ultra low volume applications for vector and nuisance pests, as well as higher volume aerial applications of herbicides and oil-spill dispersants. The USAFR aerial spray assets are the only such fixed-wing aerial spray assets within the Department of Defense. In addition to troop protection, the USAFR Aerial Spray Unit has participated in a number of humanitarian/relief missions, most recently in the response to the 2005 Hurricanes Katrina and Rita, which heavily damaged the Gulf Coasts of Louisiana, Mississippi, and Texas. This article provides historical background on the Air Force Aerial Spray Unit and describes the operations in Louisiana in the aftermath of Hurricane Katrina.

  8. LAWRENCE RISK-BASED AIR SCREENING

    Science.gov (United States)

    The pediatric asthma rate in the city of Lawrence is the highest in the state of Massachusetts. This project will evaluate whether the cumulative risks due to the air pollution in Lawrence is contributing to the high asthma rates and other respiratory problems. The project will...

  9. Achieving realistic performance and decison-making capabilities in computer-generated air forces

    Science.gov (United States)

    Banks, Sheila B.; Stytz, Martin R.; Santos, Eugene, Jr.; Zurita, Vincent B.; Benslay, James L., Jr.

    1997-07-01

    For a computer-generated force (CGF) system to be useful in training environments, it must be able to operate at multiple skill levels, exhibit competency at assigned missions, and comply with current doctrine. Because of the rapid rate of change in distributed interactive simulation (DIS) and the expanding set of performance objectives for any computer- generated force, the system must also be modifiable at reasonable cost and incorporate mechanisms for learning. Therefore, CGF applications must have adaptable decision mechanisms and behaviors and perform automated incorporation of past reasoning and experience into its decision process. The CGF must also possess multiple skill levels for classes of entities, gracefully degrade its reasoning capability in response to system stress, possess an expandable modular knowledge structure, and perform adaptive mission planning. Furthermore, correctly performing individual entity behaviors is not sufficient. Issues related to complex inter-entity behavioral interactions, such as the need to maintain formation and share information, must also be considered. The CGF must also be able to acceptably respond to unforeseen circumstances and be able to make decisions in spite of uncertain information. Because of the need for increased complexity in the virtual battlespace, the CGF should exhibit complex, realistic behavior patterns within the battlespace. To achieve these necessary capabilities, an extensible software architecture, an expandable knowledge base, and an adaptable decision making mechanism are required. Our lab has addressed these issues in detail. The resulting DIS-compliant system is called the automated wingman (AW). The AW is based on fuzzy logic, the common object database (CODB) software architecture, and a hierarchical knowledge structure. We describe the techniques we used to enable us to make progress toward a CGF entity that satisfies the requirements presented above. We present our design and

  10. Cryogel micromechanics unraveled by atomic force microscopy-based nanoindentation.

    Science.gov (United States)

    Welzel, Petra B; Friedrichs, Jens; Grimmer, Milauscha; Vogler, Steffen; Freudenberg, Uwe; Werner, Carsten

    2014-11-01

    Cell-instructive physical characteristics of macroporous scaffolds, developed for tissue engineering applications, often remain difficult to assess. Here, an atomic force microscopy-based nanoindentation approach is adapted to quantify the local mechanical properties of biohybrid glycosaminoglycan-poly(ethylene glycol) cryogels. Resulting from cryoconcentration effects upon gel formation, cryogel struts are observed to feature a higher stiffness compared to the corresponding bulk hydrogel materials. Local Young's moduli, porosity, and integral moduli of the cryogel scaffolds are compared in dependence on gel formation parameters. The results provide valuable insights into the cryogelation process and a base for adjusting physical characteristics of the obtained cryogel scaffolds, which can critically influence the cellular response.

  11. Virtual prototype interface for the Air Force Manned SpacePlane project

    Science.gov (United States)

    Stytz, Martin R.; Banks, Sheila B.; Lewis, John; Johnson, Troy D.

    1998-08-01

    The advent of requirements for worldwide deployment of space assets in support of Air Force operational missions has resulted in the need for a Manned SpacePlane (MSP) that can perform these missions with minimal preflight preparation and little, if any, in-orbit support from a mission control center. Because successful mission accomplishment will depend almost completely upon the MSP crew and the on-board capabilities of the spaceplane, the MSP user interface is a crucial component of successful mission accomplishment. In recognition of this fact, the USAF Phillips Laboratory in conjunction with USAF Space Command initiated the Virtual SpacePlane (VSP) project. To function effectively as an MSP interface development platform, the VSP must demonstrate the capability to simulate anticipated MSP missions and portray the MSP in operation throughout its entire flight regime, from takeoff through space operations and on to recovery via a horizontal landing at an airfield. Therefore, we architected, designed, and implemented a complete VSP that can be used to simulate anticipated Manned SpacePlane missions. The primary objective of the VSP is to be a virtual prototype for user interface design and development, the VSP software architecture and design facilities uncovering, refining and validating MSP user interface requirements. The Virtual SpacePlane reuses software components developed for the Virtual Cockpit and Solar System Modeler (SM) distributed virtual environment (DVE) applications, the Common Object Database (CODB) architecture, and Information Pod (Pod) interface tools developed in our labs. The Virtual Cockpit and Solar System Modeler supplied baseline interface components and tools, 3D graphical models, vehicle motion dynamics models, and DVE communication capabilities. Because we knew that the VSP's requirements would expand and evolve over the life of the project, we use the CODB architecture to facilitate our use of Rapid Evolutionary and Exploratory

  12. Active contour model based on force field analysis

    Institute of Scientific and Technical Information of China (English)

    HOU Zhi-qiang; HAN Chong-zhao

    2006-01-01

    The traditional snake initial contour should be close to the true boundary of an object of interest in an image;otherwise,an incorrect result will be obtained.Next,active contours have difficulties progressing into boundary concavities.Moreover,the traditional snake as well as almost all of its improved methods can be easily obtained from the local minimum because snake models are nonconvex.An active contour model based on force field analysis (FFA),namely,FFA snake model,is presented in this paper.Based on analyzing force distribution rules of the distance potential force field,a standard is introduced here to distinguish the false one from contour points.The result is not considered as the final solution when the snake energy is minimal.Furthermore,estimation and calculation should be made according to the established standard;only then can the result be considered final.Thus,the snake is prevented from running into the local minimum.The simulation results show that the FFA snake model has a large capture range and can move a snake into the boundary concavities,and that it is able to obtain the object of interest's contour precisely.Compared with the gradient vector flow snake,this new model has a low computational cost.

  13. Aluminum-based metal-air batteries

    Energy Technology Data Exchange (ETDEWEB)

    Friesen, Cody A.; Martinez, Jose Antonio Bautista

    2016-01-12

    Provided in one embodiment is an electrochemical cell, comprising: (i) a plurality of electrodes, comprising a fuel electrode that comprises aluminum and an air electrode that absorbs gaseous oxygen, the electrodes being operable in a discharge mode wherein the aluminum is oxidized at the fuel electrode and oxygen is reduced at the air electrode, and (ii) an ionically conductive medium, comprising an organic solvent; wherein during non-use of the cell, the organic solvent promotes formation of a protective interface between the aluminum of the fuel electrode and the ionically conductive medium, and wherein at an onset of the discharge mode, at least some of the protective interface is removed from the aluminum to thereafter permit oxidation of the aluminum during the discharge mode.

  14. ROBOT'S MOTION ERROR AND ONLINE COMPENSATION BASED ON FORCE SENSOR

    Institute of Scientific and Technical Information of China (English)

    GAN Fangjian; LIU Zhengshi; REN Chuansheng; ZHANG Ping

    2007-01-01

    Robot's dynamic motion error and on-line compensation based on multi-axis force sensor are dealt with. It is revealed that the reasons of the error are formed and the relations of the error are delivered. A motion equation of robot's termination with the error is established, and then, an error matrix and an error compensation matrix of the motion equation are also defined. An on-line error's compensation method is put forward to decrease the displacement error, which is a degree of millimeter, shown by the result of Simulation of PUMA562 robot.

  15. Phase relationships between orbital forcing and the composition of air trapped in Antarctic ice cores

    OpenAIRE

    Bazin, Lucie; Landais, Amaelle; Capron, Emilie; Masson-Delmotte, Valérie; Ritz, Catherine; Picard, Ghislain; Jouzel, Jean; Dumont, Marie; Leuenberger, Markus; Prié, Frédéric

    2016-01-01

    Orbital tuning is central for ice core chronologies beyond annual layer counting, available back to 60 ka (i.e. thousands of years before 1950) for Greenland ice cores. While several complementary orbital tuning tools have recently been developed using δ18Oatm, δO2⁄N2 and air content with different orbital targets, quantifying their uncertainties remains a challenge. Indeed, the exact processes linking variations of these parameters, measured in the air trapped in ice,...

  16. Phase relationships between orbital forcing and the composition of air trapped in Antarctic ice cores

    OpenAIRE

    Bazin, Lucie; Landais, Amaelle; Capron, Emilie; Masson-Delmotte, Valérie; Ritz, Catherine; Picard, Ghislain; Jouzel, Jean; Dumont, Marie; Leuenberger, Markus; Prié, Frédéric

    2016-01-01

    Orbital tuning is central for ice core chronologies beyond annual layer counting, available back to 60 ka (i.e. thousands of years before 1950) for Greenland ice cores. While several complementary orbital tuning tools have recently been developed using δ¹⁸Oatm, δO₂⁄N₂ and air content with different orbital targets, quantifying their uncertainties remains a challenge. Indeed, the exact processes linking variations of these parameters, measured in the air trapped in ice, to their orbital target...

  17. Design of Piston Air Compressor Unit Control System based Converter

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Based on the running characteristics and high energy consumption of air compressors in coal mines,an air pressure PID closed loop control system has been designed in this paper.The system is composed of PLC, converter and sensors etc and adopts the control method of converter triple-evaporator which makes air supply"need-based".The designed system has been applied in multiple coal mines and the results show its energy saving is remarkable and potential application is widely.

  18. Influence of grid resolution and meteorological forcing on simulated European air quality: A sensitivity study with the modeling system COSMO-MUSCAT

    Science.gov (United States)

    Wolke, Ralf; Schröder, Wolfram; Schrödner, Roland; Renner, Eberhard

    2012-06-01

    Model evaluation studies are essential for determining model performance as well as assessing model deficiencies, and are the focus of the Air Quality Model Evaluation International Initiative (AQMEII). The chemistry-transport model system COSMO-MUSCAT participates in this initiative. In this paper the robustness and variability of the model results against changes in the model setup are analyzed. Special focus is given to the formation of secondary particulate matter and the ability to reproduce unusually high levels of PM10 in Central Europe caused by long-range transported smoke of fires in western Russia. Seven different model configurations are investigated in this study. The COSMO-MUSCAT results are evaluated in comparison with ground-based measurements in Central Europe. The analysis is performed for two selected periods in April/May 2006 and October 2006 which are characterized by elevated concentrations of PM. Furthermore, the sensitivity of the results is studied against the used grid resolution and the meteorological forcing. Here, COSMO-MUSCAT is applied with different horizontal grid sizes and, alternatively, forced by reanalysis data with finer resolution. The use of finer grid resolutions in COSMO-MUSCAT has direct consequences on the meteorological forcing as well as on the calculated emission and deposition rates. The presented results suggest a large impact of the meteorological effects on the PM concentrations. The more accurate spatial appointment of the emissions and deposition fluxes seems to be of little consequence compared to the meteorological forcing.

  19. 33 CFR 334.590 - Atlantic Ocean off Cape Canaveral, Fla.; Air Force missile testing area, Patrick Air Force Base...

    Science.gov (United States)

    2010-07-01

    .... These signals will be in the form of a large red ball and a red flashing high intensity beacon. One... of the danger zone. An amber rotating beacon and warning sign will be erected on the north side...

  20. The Air Force Academy’s Falcon Telescope Network: An Educational and Research Network for K-12 and Higher Education

    Science.gov (United States)

    Chun, Francis; Tippets, Roger; Della-Rose, Devin J.; Polsgrove, Daniel; Gresham, Kimberlee; Barnaby, David A.

    2015-01-01

    The Falcon Telescope Network (FTN) is a global network of small aperture telescopes developed by the Center for Space Situational Awareness Research in the Department of Physics at the United States Air Force Academy (USAFA). Consisting of commercially available equipment, the FTN is a collaborative effort between USAFA and other educational institutions ranging from two- and four-year colleges to major research universities. USAFA provides the equipment (e.g. telescope, mount, camera, filter wheel, dome, weather station, computers and storage devices) while the educational partners provide the building and infrastructure to support an observatory. The user base includes USAFA along with K-12 and higher education faculty and students. The diversity of the users implies a wide variety of observing interests, and thus the FTN collects images on diverse objects, including satellites, galactic and extragalactic objects, and objects popular for education and public outreach. The raw imagery, all in the public domain, will be accessible to FTN partners and will be archived at USAFA. USAFA cadets use the FTN to continue a tradition of satellite characterization and astronomical research; this tradition is the model used for designing the network to serve undergraduate research needs. Additionally, cadets have led the development of the FTN by investigating observation priority schemes and conducting a 'day-in-the-life' study of the FTN in regards to satellite observations. With respect to K-12 outreach, cadets have provided feedback to K-12 students and teachers through evaluation of first-light proposals. In this paper, we present the current status of the network and results from student participation in the project.

  1. Performance and evaluation of desiccant based air conditioning system.

    Directory of Open Access Journals (Sweden)

    Gaurav S. Wani

    2014-12-01

    Full Text Available This Project work presents study and experimental analysis of Desiccant based air conditioning system.The main purpose of this project is to increase the efficency of air conditioning system.In the convenstional air conditioning system cooling coli has two load latent load and sensible load. Cooling has to cool the air and simultaneously to dehumidify it.It increases load on cooling coil and affects performance to the system. To increase the efficiency the air conditioning system desiccant materials are used at the inlet of the air conditioning test rig. Desiccant materials attract moisture based on differences in vapor pressure. Due to their enormous affinity to absorb water and considerable ability to hold water. Due to use of desiccant material load on the cooling coil reduces since moisture is absorbed by desiccant; cooling coil has to take only sensible load. Analysis is done using different desiccant materials and based on the observation, power consumption before and after desiccant is calculated. From this conclusion is made that desiccant material improves the efficiency of air conditioning test rig

  2. Improving the Electrical Parameters of a Photovoltaic Panel by Means of an Induced or Forced Air Stream

    Directory of Open Access Journals (Sweden)

    R. Mazón-Hernández

    2013-01-01

    Full Text Available The main priority in photovoltaic (PV panels is the production of electricity. The transformation of solar energy into electricity depends on the operating temperature in such a way that the performance increases with the decreasing temperatures. In the existing literature, different cooling techniques can be found. The purpose of most of them is to use air or water as thermal energy carriers. This work is focused on the use of air as a working fluid whose movement is either induced by natural convection or forced by means of a fan. The aim of this study is to characterise the electrical behaviour of the solar panels in order to improve the design of photovoltaic installations placed in roof applications ensuring low operating temperatures which will correct and reverse the effects produced on efficiency by high temperature. To do this, a test installation has been constructed at the Universidad Politécnica de Cartagena in Spain. In this paper, the results of the tests carried out on two identical solar panels are included. One of them has been modified and mounted on different channels through which air flows. The different studies conducted show the effects of the air channel cross-section, the air velocity, and the panel temperature on the electrical parameters of the solar panels, such as the voltage, current, power, and performance. The results conclude that the air space between the photovoltaic panels and a steel roof must be high enough to allow the panel to be cooled and consequently to achieve higher efficiency.

  3. A novel reciprocating micropump based on Lorentz force

    Science.gov (United States)

    Salari, Alinaghi; Hakimsima, Abbas; Shafii, Mohammad Behshad

    2015-03-01

    Lorentz force is the pumping basis of many electromagnetic micropumps used in lab-on-a-chip. In this paper a novel reciprocating single-chamber micropump is proposed, in which the actuation technique is based on Lorentz force acting on an array of microwires attached on a membrane surface. An alternating current is applied through the microwires in the presence of a magnetic field. The resultant force causes the membrane to oscillate and pushes the fluid to flow through microchannel using a ball-valve. The pump chamber (3 mm depth) was fabricated on a Polymethylmethacrylate (PMMA) substrate using laser engraving technique. The chamber was covered by a 60 μm thick hyper-elastic latex rubber diaphragm. Two miniature permanent magnets capable of providing magnetic field of 0.09 T at the center of the diaphragm were mounted on each side of the chamber. Square wave electric current with low-frequencies was generated using a function generator. Cylindrical copper microwires (250 μm diameter and 5 mm length) were attached side-by-side on top surface of the diaphragm. Thin loosely attached wires were used as connectors to energize the electrodes. Due to large displacement length of the diaphragm (~3 mm) a high efficiency (~90%) ball valve (2 mm diameter stainless steel ball in a tapered tubing structure) was used in the pump outlet. The micropump exhibits a flow rate as high as 490 μl/s and pressure up to 1.5 kPa showing that the pump is categorized among high-flow-rate mechanical micropumps.

  4. Evaluation of bacterial contamination on surgical drapes following use of the Bair Hugger(®) forced air warming system.

    Science.gov (United States)

    Occhipinti, Lindsay L; Hauptman, Joe G; Greco, Justin J; Mehler, Stephen J

    2013-12-01

    This pilot study determined the rate of bacterial contamination on surgical drapes of small animal patients warmed intra-operatively with the Bair Hugger(®) forced air warming system compared to a control method. Surgical drapes of 100 patients undergoing clean surgical procedures were swabbed with aerobic culturettes at the beginning and end of surgery. Samples were cultured on Trypticase soy agar. Contamination of the surgical drapes was identified in 6/98 cases (6.1%). There was no significant difference in the number of contaminated surgical drapes between the Bair Hugger(®) and control groups (P = 0.47).

  5. Headquarters Air Force Logistics Command guidance manual for hazardous waste minimization (PACER REDUCE): Hazardous Waste Remedial Actions Program

    International Nuclear Information System (INIS)

    This manual provides guidance for the Air Force Logistics Command (AFLC) Waste Minimization Program, called PACER REDUCE, and applies to all AFLC installations and personel who are responsible for implementing and monitoring activities relating to PACER REDUCE. This guidance for waste minimization provides management and technical approaches for assessing potential waste reduction techniques and for making informed decisions concerning industrial process and waste stream management. Such actions will assist in achieving regulatory compliance with the Resource Conservation and Recovery Act of 1976 as updated by the Hazardous and Solid Waste Amendments of 1984. 37 refs., 14 figs., 22 tabs

  6. 纳米颗粒物在空气中的阻力特性研究%Investigation of drag force on nanoparticles in air

    Institute of Scientific and Technical Information of China (English)

    罗爽; 焦可歆; 刘志宇; 梁深; 戚朋飞; 王军; 夏国栋

    2015-01-01

    We theoretically investigate the drag force of a spherical nanoparticle in air,where by the particle is in the free molecule and the van der Waals interaction between the particle and gas molecule has to be taken into account.Within the framework of gas kinetic theory,the drag force of a nanoparticle in air is derived in two limiting collision models,namely,specular and diffuse scat-tering.The effects of air temperature,particle size and material of particles on the drag force for a particle moving in air are stud-ied based on the drag force formulation.It is found that the drag force decreases with increasing air temperature.For particles with radius less than 30 nm,the influence of the van der Waals interaction cannot be neglected.The rigid body collision model employed in previous papers can lead to large errors for nanosized particles,because the drag force is reported to be independent of the particle material upon the rigid body collision between the gas molecule and particle,which is inconsistent with the experi-mental results.If the van der Waals interaction is involved into the collision model,the drag force is found to depend on the mate-rial of the nanoparticle.%对于空气中的纳米颗粒,其动力学行为属于自由分子区,并且在阻力计算中需要考虑气体分子与颗粒之间的范德瓦尔斯力。基于气体动力学理论推导得到了纳米颗粒在二元混合气体中所受阻力的计算式。在此基础上,分析了纳米颗粒在空气中所受阻力与空气温度、颗粒粒径、颗粒物质种类等因素的依赖关系。研究发现:纳米颗粒所受空气阻力随温度升高而减小;在颗粒粒径小于30 nm 时,范德瓦尔斯力的作用不能忽略,经典的刚体碰撞模型不再成立;由于势参数的不同,对于不同物质种类的颗粒,其阻力差异比较明显。分析结果表明,提出的计算公式与实验结果吻合较好,而采用经典的 Stokes-Cunningham 公式

  7. Force-compensated hydrogel-based pH sensor

    Science.gov (United States)

    Deng, Kangfa; Gerlach, Gerald; Guenther, Margarita

    2015-04-01

    This paper presents the design, simulation, assembly and testing of a force-compensated hydrogel-based pH sensor. In the conventional deflection method, a piezoresistive pressure sensor is used as a chemical-mechanical-electronic transducer to measure the volume change of a pH-sensitive hydrogel. In this compensation method, the pH-sensitive hydrogel keeps its volume constant during the whole measuring process, independent of applied pH value. In order to maintain a balanced state, an additional thermal actuator is integrated into the close-loop sensor system with higher precision and faster dynamic response. Poly (N-isopropylacrylamide) (PNIPAAm) with 5 mol% monomer 3-acrylamido propionic acid (AAmPA) is used as the temperature-sensitive hydrogel, while poly (vinyl alcohol) with poly (acrylic acid) (PAA) serves as the pH-sensitive hydrogel. A thermal simulation is introduced to assess the temperature distribution of the whole microsystem, especially the temperature influence on both hydrogels. Following tests are detailed to verify the working functions of a sensor based on pH-sensitive hydrogel and an actuator based on temperature-sensitive hydrogel. A miniaturized prototype is assembled and investigated in deionized water: the response time amounts to about 25 min, just half of that one of a sensor based on the conventional deflection method. The results confirm the applicability of t he compensation method to the hydrogel-based sensors.

  8. [The organizational bases for the building of a modern medical support system for the Armed Forces].

    Science.gov (United States)

    Chizh, I M

    1996-01-01

    In the article the problems concerning characteristic features of the local wars and armed conflicts, organization bases of construction of The Army and Fleet medical support modern system are discussed. The organization of personnel medical security is considered depending on the duration, intensity and spatial scope of military conflict, peculiarities of group (forces) application and ways of military actions conduction. The distribution of federal troops sanitary losses during the war in Chechenskaya Republic is shown depending on the type, localization and degree of injuries gravity as well as volume of the wounded and invalids evacuation by air transport and work of military medical institutions. The following principles of construction of the Armed Forces medical support system are formulated: The system must be in compliance with troops goals, structure, strategy and tactics, its specificity; development of medical security forms and methods, their historicism; interdependency, completeness and integrity of the system's elements; territorial aspects of its construction and management optimization. Considering character of the goals being laid on the Mobile Forces the paramount importance is attached to the level of readiness of medical service and its formations and units to act in crisis situations. PMID:8659162

  9. Based on the Force Deployment Model of Unascertained Expectation

    Directory of Open Access Journals (Sweden)

    Jianli Chen

    2013-05-01

    Full Text Available In this study, we utilize the unascertained mathematics method to give the unascertained number of countermeasure of anti-terrorism strategic force deployment and unknown event. It has been defined the situation sets of force deployment, condition density and mathematical expectation of density model. It has been given the unascertained parameters Cij which decide and direct the force deployment. Find out the condition density matrix of force deployment, further get the conditional density of single target force deployment, using the maximum density mathematical expectation in order to get the optimal mathematical model of multiple target force deployment. Analyzing the coefficient of model and provide two kinds of discussed computing method. The model overcomes the limitation of past deterministic thinking method which study the force deployment and provide the decision maker a relative substantial theory evidence.

  10. The South African Air Force, 1920–2012: A Review of its History and an Indication of its Cultural Heritage

    Directory of Open Access Journals (Sweden)

    André Wessels

    2013-02-01

    Full Text Available Although a South African Aviation Corps existed for a few months in 1915, and although several South Africans saw action in World War I as members of Britain’s Royal Flying Corps, the history of the South African Air Force (SAAF – the world’s second oldest air force – strictly speaking only dates back to 1 February 1920.  In this article, a review is provided of the history of the SAAF, with specific reference to its operational deployments in the 1920s; the difficult years of the great depression and its aftermath and impact on the SAAF; the very important role played by the SAAF in the course of World War II (for example in patrolling South Africa’s coastal waters, and in taking part in the campaigns in East Africa and Abyssinia, as well as in North Africa, Madagascar, Italy, over the Mediterranean and in the Balkans; the post-war rationalisation; its small but important role in the Korean War; the acquisition of a large number of modern aircraft and helicopters from the mid-1950s to the mid-1970s; the impact that sanctions had on the SAAF; the SAAF’s role in Northern Namibia and in Angola during the war years, 1966–1989, and the SAAF in post-apartheid South Africa.  Throughout the article, historiographical matters are mentioned by means of references – either in the text or in footnotes – to the most important available sources.

  11. Corrective Action Decision Document for Corrective Action Unit 486: Double Tracks RADSAFE Area, Nellis Air Force Range, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    ITLV

    1999-07-12

    This Corrective Action Decision Document (CADD) has been prepared for Corrective Action Unit (CAU) 486, Double Tracks Radiological Safety (RADSAFE) Area (DTRSA) in accordance with the Federal Facility Agreement and Consent Order (FFACO) of 1996 that was agreed to by the U.S. Department of Energy, Nevada Operations Office (DOE/NV); the Nevada Division of Environmental Protection (NDEP); and the U.S Department of Defense (FFACO, 1996). The CADD provides or references the specific information necessary to recommend a preferred corrective action for the single Corrective Action Site (CAS), 71-23-001-71DT, within CAU 486. Corrective Action Unit 486 is located on the Nellis Air Force Range 71 North, west of the Tonopah Test Range (TTR), Nevada. The TTR, located in the Nellis Air Force Range, is approximately 140 miles (mi) northwest of Las Vegas, Nevada (Figure 1-1). The DTRSA is located on the west side of the Cactus Range approximately 5 mi southwest of the Cactus Spring gate at the intersection of the Cactus Spring Road and the Double Tracks Control Point Road (Figure 1-2).

  12. Numerical investigation of forced ignition in laminar counterflow non-premixed methane-air flames

    OpenAIRE

    Richardson, E. S.; Mastorakos, E

    2007-01-01

    Simulations of forced ignition of non-premixed laminar counterflow flames are used to study the effect of strain rate on ignition success. A one dimensional calculation is performed, using detailed methane chemical kinetics and treating the spark as an instantaneous heat release in an inert mixing layer. Ignition success depends on the mixture composition at the spark location, resulting in lean and rich ignitability limits for a given spark that can be different from the fuel's static flamma...

  13. Air-coupled acoustic radiation force for non-contact generation of broadband mechanical waves in soft media

    Science.gov (United States)

    Ambroziński, Łukasz; Pelivanov, Ivan; Song, Shaozhen; Yoon, Soon Joon; Li, David; Gao, Liang; Shen, Tueng T.; Wang, Ruikang K.; O'Donnell, Matthew

    2016-07-01

    A non-contact method for efficient, non-invasive excitation of mechanical waves in soft media is proposed, in which we focus an ultrasound (US) signal through air onto the surface of a medium under study. The US wave reflected from the air/medium interface provides radiation force to the medium surface that launches a transient mechanical wave in the transverse (lateral) direction. The type of mechanical wave is determined by boundary conditions. To prove this concept, a home-made 1 MHz piezo-ceramic transducer with a matching layer to air sends a chirped US signal centered at 1 MHz to a 1.6 mm thick gelatin phantom mimicking soft biological tissue. A phase-sensitive (PhS)-optical coherence tomography system is used to track/image the mechanical wave. The reconstructed transient displacement of the mechanical wave in space and time demonstrates highly efficient generation, thus offering great promise for non-contact, non-invasive characterization of soft media, in general, and for elasticity measurements in delicate soft tissues and organs in bio-medicine, in particular.

  14. Impact of thermal frequency drift on highest precision force microscopy using quartz-based force sensors at low temperatures

    Directory of Open Access Journals (Sweden)

    Florian Pielmeier

    2014-04-01

    Full Text Available In frequency modulation atomic force microscopy (FM-AFM the stability of the eigenfrequency of the force sensor is of key importance for highest precision force measurements. Here, we study the influence of temperature changes on the resonance frequency of force sensors made of quartz, in a temperature range from 4.8–48 K. The sensors are based on the qPlus and length extensional principle. The frequency variation with temperature T for all sensors is negative up to 30 K and on the order of 1 ppm/K, up to 13 K, where a distinct kink appears, it is linear. Furthermore, we characterize a new type of miniaturized qPlus sensor and confirm the theoretically predicted reduction in detector noise.

  15. New Changes of Fire Tactics in Air Defense Forces Group Missile for Equipment Authorization%编配某型导弹的防空兵群火力运用新变化

    Institute of Scientific and Technical Information of China (English)

    王仁芳; 王巨海; 韩校粉

    2013-01-01

    某新型地空导弹列装部队,给部队作战能力提升带来革命性变化,结合新型导弹的作战优势,阐述了防空兵群火力运用新变化,进一步提出了提高防空兵群火力运用效能的对策。%íí Ground-to-air Missile incorporated in army, this brings large affects for the advancing of operational capability in army. Based the campaign superiority of new Missile,it expatiates the new changes of fire tactics of Air Defense Forces Group and brought forward more countermeasures to advance the efficiency of fire tactics of Air Defense Forces Group.

  16. PC-based telerehabilitation system with force feedback.

    Science.gov (United States)

    Popescu, V; Burdea, G; Bouzit, M; Girone, M; Hentz, V

    1999-01-01

    A PC-based orthopedic rehabilitation system was developed for use at home, while allowing for remote monitoring from the clinic. The home rehabilitation station has a Pentium II PC with graphics accelerator, Polhemus tracker, and a novel Multipurpose Haptic Control Interface with its own Pentium board. This interface is used to sample patient's hand positions and to provide resistive forces using the Rutgers Master II (RMII) glove. A library of virtual rehabilitation routines was developed using WorldToolKit software. At the present time, it consists of two physical therapy exercises (DigiKey and Ball) and two functional rehabilitation exercises (Peg Board test and Ball game). All VR exercises allow automatic and transparent patient data collection into an Oracle database. A remote Pentium II PC is connected with the home-based PC over the Internet and an additional video-conferencing connection. The remote computer running Oracle server is used to maintain the patient database, monitor progress and change exercise level of difficulty. This allows for timely patient progress monitoring and repeat evaluations over time from the Clinic. The system will soon start clinical trails at Stanford Medical School, with progress being monitored remotely from Rutgers University. Other rehabilitation haptic interfaces under development include devices for elbow, and knee rehabilitation connected to the Multipurpose Haptic Control Interface. PMID:10538369

  17. A virtual-reality-based telerehabilitation system with force feedback.

    Science.gov (United States)

    Popescu, V G; Burdea, G C; Bouzit, M; Hentz, V R

    2000-03-01

    A PC-based orthopedic rehabilitation system was developed for use at home, while allowing remote monitoring from the clinic. The home rehabilitation station has a Pentium II PC with graphics accelerator, a Polhemus tracker, and a multipurpose haptic control interface. This novel interface is used to sample a patient's hand positions and to provide resistive forces using the Rutgers Master II (RMII) glove. A library of virtual rehabilitation routines was developed using WorldToolKit software. At the present time, it consists of three physical therapy exercises (DigiKey, ball, and power putty) and two functional rehabilitation exercises (peg board and ball game). These virtual reality exercises allow automatic and transparent patient data collection into an Oracle database. A remote Pentium II PC is connected with the home-based PC over the Internet and an additional video conferencing connection. The remote computer is running an Oracle server to maintain the patient database, monitor progress, and change the exercise level of difficulty. This allows for patient progress monitoring and repeat evaluations over time. The telerehabilitation system is in clinical trails at Stanford Medical School (CA), with progress being monitored from Rutgers University (NJ). Other haptic interfaces currently under development include devices for elbow and knee rehabilitation connected to the same system. PMID:10761773

  18. Needs and workflow assessment prior to implementation of a digital pathology infrastructure for the US Air Force Medical Service

    Directory of Open Access Journals (Sweden)

    Jonhan Ho

    2013-01-01

    Full Text Available Background: Advances in digital pathology are accelerating integration of this technology into anatomic pathology (AP. To optimize implementation and adoption of digital pathology systems within a large healthcare organization, initial assessment of both end user (pathologist needs and organizational infrastructure are required. Contextual inquiry is a qualitative, user-centered tool for collecting, interpreting, and aggregating such detailed data about work practices that can be employed to help identify specific needs and requirements. Aim: Using contextual inquiry, the objective of this study was to identify the unique work practices and requirements in AP for the United States (US Air Force Medical Service (AFMS that had to be targeted in order to support their transition to digital pathology. Subjects and Methods: A pathology-centered observer team conducted 1.5 h interviews with a total of 24 AFMS pathologists and histology lab personnel at three large regional centers and one smaller peripheral AFMS pathology center using contextual inquiry guidelines. Findings were documented as notes and arranged into a hierarchal organization of common themes based on user-provided data, defined as an affinity diagram. These data were also organized into consolidated graphic models that characterized AFMS pathology work practices, structure, and requirements. Results: Over 1,200 recorded notes were grouped into an affinity diagram composed of 27 third-level, 10 second-level, and five main-level (workflow and workload distribution, quality, communication, military culture, and technology categories. When combined with workflow and cultural models, the findings revealed that AFMS pathologists had needs that were unique to their military setting, when compared to civilian pathologists. These unique needs included having to serve a globally distributed patient population, transient staff, but a uniform information technology (IT structure. Conclusions: The

  19. Complejo religioso de la Academia de las U.S. Air Force, en Colorado

    Directory of Open Access Journals (Sweden)

    Skidmore, Owings & Merrill, Arquitectos

    1965-06-01

    Full Text Available The building houses the following. A protestant chapel seating 900 persons; a catholic chapel with room for 500 faithful; a Jewish church with seating accommodation for 100; and also a series of accessory facilities. These include choirs, vestries, sacristies, a baptistery for the catholic chapel, and a small lateral chapel—connected to the catholic church—in memory of our Lady of the Air. In addition to the fine ambientation, achieved by the use of suitable modem materials, this symbolical construction is praiseworthy because of the success of the architects in dealing with the dynamic interplay of masses and powerful colouring.El edificio construido aloja: un templo protestante con asientos para 900 personas; una capilla católica con capacidad para 500 fieles, y una sinagoga para 100 fieles sentados; así como una serie de dependencias anexas: coros, vestuarios, sacristías, un baptisterio para la capilla católica, etc., y una pequeña capilla lateral—en conexión con la capilla católica—para Nuestra Señora del Aire. Además de la ambientación conseguida utilizando materiales actuales, este edificio simbólico destaca por la habilidad y acierto con que los arquitectos han jugado con: la dinámica de la forma y la energía del color.

  20. [Migrants from bordering countries in the labor force of the metropolitan area of Buenos Aires, 1980-1996].

    Science.gov (United States)

    Maguid, A

    1997-04-01

    Data from the 1991 Argentine census indicate that migrants from neighboring countries at that date were maintaining patterns of entry into the labor force of Buenos Aires consistent with past tendencies. Migrants tended to be employed in less skilled manufacturing industries, construction, commerce, and domestic work, often filling positions rejected by the native population because of low wages and poor working conditions. Profound changes in the Argentine economy since 1991 have included rising unemployment and underemployment and a loss of productive jobs in industry and construction. A comparison of the occupational structure of migrants from neighboring countries and of the total population for the years 1980, 1991, and 1996 demonstrates that important changes in sectorial employment have occurred among both the native and immigrant populations, with the immigrant population increasingly relegated to ever smaller sectors of the labor market offering less attractive employment. Nearly half of the 841,697 persons immigrating in 1991 from countries bordering Argentina settled in the Buenos Aires metropolitan region, comprising 42.8% of foreigners in the metropolitan area and 3.7% of the total regional population. Of the population from border countries residing in Buenos Aires, 43% are Paraguayan, 28% Uruguayan, 15% Bolivian, 12% Chilean, and 2% Brazilian. The unemployment rate in Buenos Aires fluctuated between 4% and 6% during 1974-92, but it rose to 10.6% in 1993 and then to 18% in 1996. The underemployment rate rose from 4.6% in 1983 to 8.2% in 1993 and 12.6% in 1996. PMID:12321683

  1. A voice coil motor based measuring force control system for tactile scanning profiler

    Science.gov (United States)

    Feng, Shengdong; Liu, Xiaojun; Chen, Liangzhou; Zhou, Liping; Lu, Wenlong

    2015-02-01

    In tactile scanning profiler, the measuring force would change in a wide range when it was used for profile measurement in a large range, which could possibly destroy the measured surface. To solve the problem, measuring force control system for tactile scanning profiler was needed. In the paper, a voice coil motor-based measuring force control system for tactile scanning profiler was designed. In the design, a low stiffness coefficient spring was used to provide contact force, while a voice coil motor (VCM) to balance the spring force so that the contact force could be kept for constant measuring force. A VCM was designed specially, and for active measuring force control, a precision current source circuit under the control of a DSP unit was designed to drive the VCM. The performance of voice coil motor based measuring force control system had been tested, and its good characteristics were verified.

  2. Insulin sensitivity and serum TCDD in Air Force veterans occupationally exposed to herbicides during the Vietnam war

    Energy Technology Data Exchange (ETDEWEB)

    Kern, P.; Said, S. [Univ. of Arkansas for Medical Sciences, Little Rock (United States); Jackson, W. Jr; Michalek, J. [Air Force Research Lab., San Antonio (United States)

    2004-09-15

    Between 1961 and 1971, the United States Air Force sprayed 12 million gallons of the defoliant ''Agent Orange'' on 3.6 million acres of Vietnam. Agent Orange was a 1:1 mixture of 2,4-dichlorophenoxyacetic acid and 2,4,5- trichlorophenoxyacetic acid, and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) was a contaminant of the defoliant, from less than 0.05 to almost 50 parts per million. Numerous Vietnam veterans were exposed to TCDD when Agent Orange and other TCDD-contaminated herbicides were sprayed in large quantities in Vietnam and TCDD has been found at many toxic waste disposal sites in the United States. Some of the highest exposure to TCDD occurred in members of Operation Ranch Hand, the Air Force unit responsible for spraying herbicides from fix-wing aircraft in Vietnam. The Air Force Health Study (AFHS), an epidemiological study of Ranch Hand veterans, was launched in 1980 to address veteran concerns regarding Agent Orange exposure. A link between TCDD and diabetes has been demonstrated in several studies. Among the Ranch Hand veterans with high blood levels of TCDD, there was a significant increase in the prevalence of diabetes and a decrease in the age at which diabetes was diagnosed. In a study from Seveso, Italy, where 45,000 people had varying levels of exposure to TCDD, there were significant increases in mortality from coronary artery disease and diabetes. Several studies have demonstrated a relationship between blood TCDD levels and hyperinsulinemia. The data suggest that non-diabetic individuals exposed to TCDD have an increased risk of insulin-resistance, being able to maintain normal blood glucose levels but only because of very high concentrations of insulin. As a result of available evidence, public policy decisions have been made, such as a decision by the Veterans Administration that diabetes is a service-connected condition in Agent Orange-exposed Vietnam veterans. Here we study the relation between TCDD insulin sensitivity

  3. Laminar Forced Convection Heat and Mass Transfer of Humid Air across a Vertical Plate with Condensation

    Institute of Scientific and Technical Information of China (English)

    李成; 李俊明

    2011-01-01

    Condensation of humid air along a vertical plate was numerically investigated, with the mathematical model built on the full boundary layer equations and the film-wise condensation assumption. The velocity, heat and mass transfer characteristics at the gas-liquid interface were numerical analyzed and the results indicated that it was not reasonable to neglect the condensate film from the point of its thickness only. The condensate film thickness, interface temperature drop and the interface tangential velocity affect the physical fields weakly. However, the subcooling and the interface normal velocity were important factors to be considered before the simplification was made. For higher wall temperature, the advective mass transfer contributed much to the total mass transfer. Therefore, the boundary conditions were the key to judge the rationality of neglecting the condensate film for numerical solutions. The numerical results were checked by comparing with experiments and correlations.

  4. ANALYSIS OF LAMINAR FORCED CONVECTION OF AIR FOR CROSSFLOW OVER TWO STAGGERED FLAT TUBES

    Directory of Open Access Journals (Sweden)

    Tahseen A. Tahseen

    2012-12-01

    Full Text Available In this work, the numerical simulation of steady heat transfer and fluid flow over a bank of flat tubes in staggered configurations for determining the constant surface temperature is presented. The results are attained using the finite volume method (FVM and body fitted coordinates (BFC technique. Transverse ratios (ST/Ds of the pitch to small diameter of 3.0, 4.0 and 6.0 are also considered. The Reynolds numbers used are 10, 20, 60, 80 and 100, and the Prandtl number is taken as 0.7. The isothermal line, streamline and average Nusselt number were analyzed in this paper. It was found that the strength of the heat transfer between the surface of the tubes and the air flow increases with increasing Reynolds number and increasing pitch-to-diameter ratios. Also, the effect of the Reynolds number clear for the isothermal line, streamline and the average Nusselt number.

  5. Booba x Nike 1World Air Force 1很前卫、很嘻哈

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    继法国音乐人Busy P与Nike合作了Busy P x Nike NSW air foroe1之后,又一名法国说唱歌手Booba被选定为Nike 1World计划的18个参与者之一。鞋面采用了premium红色皮革,这是Booba最喜欢的颜色。细节包括了鞋舌上的09字样(代表了明年Booba即将发行的专辑),鞋面上精美的tattoo print。透明的鞋底中印有Booba的祖国塞内加尔的国旗图案。

  6. Femtosecond laser irradiation of indium phosphide in air: Raman spectroscopic and atomic force microscopic investigations

    Energy Technology Data Exchange (ETDEWEB)

    Bonse, J.; Wrobel, J.M.; Brzezinka, K.-W.; Esser, N.; Kautek, W

    2002-12-30

    Surface modification and ablation of crystalline indium phosphide was performed with single and double 130 fs pulses from a Ti:sapphire laser. The morphological features resulting from laser processing, have been investigated by means of micro Raman spectroscopy as well as by optical, atomic force and scanning electron microscopy. The studies indicate amorphous, ablated and recrystallized zones on the processed surface. In the single-pulse irradiation experimentsveral different threshold fluences could be assigned to the processes of melting, ablation and polycrystalline resolidification. Residual stress has been detected within the irradiated areas. Double-pulse exposure experiments have been analyzed in order to clarify the effect of cumulative damage in the ablation process of indium phosphide.

  7. Multi-frequency tapping-mode atomic force microscopy beyond three eigenmodes in ambient air

    Directory of Open Access Journals (Sweden)

    Santiago D. Solares

    2014-09-01

    Full Text Available We present an exploratory study of multimodal tapping-mode atomic force microscopy driving more than three cantilever eigenmodes. We present tetramodal (4-eigenmode imaging experiments conducted on a thin polytetrafluoroethylene (PTFE film and computational simulations of pentamodal (5-eigenmode cantilever dynamics and spectroscopy, focusing on the case of large amplitude ratios between the fundamental eigenmode and the higher eigenmodes. We discuss the dynamic complexities of the tip response in time and frequency space, as well as the average amplitude and phase response. We also illustrate typical images and spectroscopy curves and provide a very brief description of the observed contrast. Overall, our findings are promising in that they help to open the door to increasing sophistication and greater versatility in multi-frequency AFM through the incorporation of a larger number of driven eigenmodes, and in highlighting specific future research opportunities.

  8. Update to the Lightning Probability Forecast Equations at Kennedy Space Center/Cape Canaveral Air Force Station, Florida

    Science.gov (United States)

    Lambert, Winifred; Roeder, William

    2007-01-01

    This conference presentation describes the improvement of a set of lightning probability forecast equations that are used by the 45th Weather Squadron forecasters for their daily 1100 UTC (0700 EDT) weather briefing during the warm season months of May- September. This information is used for general scheduling of operations at Cape Canaveral Air Force Station and Kennedy Space Center. Forecasters at the Spaceflight Meteorology Group also make thunderstorm forecasts during Shuttle flight operations. Five modifications were made by the Applied Meteorology Unit: increased the period of record from 15 to 17 years, changed the method of calculating the flow regime of the day, calculated a new optimal layer relative humidity, used a new smoothing technique for the daily climatology, and used a new valid area. The test results indicated that the modified equations showed and increase in skill over the current equations, good reliability, and an ability to distinguish between lightning and non-lightning days.

  9. Fluid intellingence and spatial reasoning as predictors of pilot training performance in the South African Air Force (SAAF

    Directory of Open Access Journals (Sweden)

    François de Kock

    2009-04-01

    Full Text Available Pilot selection is a form of high-stakes selection due to the massive costs of training, high trainee ability requirements and costly repercussions of poor selection decisions. This criterion-related validation study investigated the predictive ability of fluid intelligence and spatial reasoning in predicting three criteria of pilot training performance, using an accumulated sample of South African Air Force pilots (N = 108. Hierarchical multiple regression analyses with training grade achieved as criterion were performed for each of the phases of training, namely practical flight training, ground school training, and officers’ formative training. Multiple correlations of 0.35 (p < 0.01, 0.20 (p > 0.05 and 0.23 (p > 0.05 were obtained for flight, ground school and formative training results, respectively. Spatial ability had incremental validity over fluid intelligence for predicting flight training performance.

  10. Li-air batteries having ether-based electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Amine, Khalil; Curtiss, Larry A; Lu, Jun; Lau, Kah Chun; Zhang, Zhengcheng; Sun, Yang-Kook

    2015-03-03

    A lithium-air battery includes a cathode including a porous active carbon material, a separator, an anode including lithium, and an electrolyte including a lithium salt and polyalkylene glycol ether, where the porous active carbon material is free of a metal-based catalyst.

  11. Lithium air batteries having ether-based electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Amine, Khalil; Curtiss, Larry A.; Lu, Jun; Lau, Kah Chun; Zhang, Zhengcheng; Sun, Yang-Kook

    2016-10-25

    A lithium-air battery includes a cathode including a porous active carbon material, a separator, an anode including lithium, and an electrolyte including a lithium salt and polyalkylene glycol ether, where the porous active carbon material is free of a metal-based catalyst.

  12. Phase relationships between orbital forcing and the composition of air trapped in Antarctic ice cores

    Directory of Open Access Journals (Sweden)

    L. Bazin

    2015-04-01

    Full Text Available Orbital tuning is central for ice core chronologies beyond annual layer counting, available back to 60 ka (i.e. thousand of years before 1950 for Greenland ice cores. While several complementary orbital tuning tools have recently been developed using δ18Oatm, δO2/N2 and air content with different orbital targets, quantifying their uncertainties remains a challenge. Indeed, the exact processes linking variations of these parameters, measured in the air trapped in ice, to their orbital targets are not yet fully understood. Here, we provide new series of δO2/N2 and δ18Oatm data encompassing Marine Isotopic Stage (MIS 5 (between 100–160 ka and the oldest part (380–800 ka of the East Antarctic EPICA Dome C (EDC ice core. For the first time, the measurements over MIS 5 allow an inter-comparison of δO2/N2 and δ18Oatm records from three East Antarctic ice core sites (EDC, Vostok and Dome F. This comparison highlights a site-specific relationship between δO2/N2 and its local summer solstice insolation. Such a relationship increases the uncertainty associated with the use of δO2/N2 as a tool for orbital tuning. Combining records of δ18Oatm and δO2/N2 from Vostok and EDC, we evidence a loss of orbital signature for these two parameters during periods of minimum eccentricity (∼400, ∼720–800 ka. Our dataset reveals a time-varying lag between δO2/N2 and δ18Oatm over the last 800 ka that we interpret as variations of the lag between δ18Oatm and precession. Large lags of ∼5 ka are identified during Terminations I and II, associated with strong Heinrich events. On the opposite, minimal lags (∼1–2 ka are identified during four periods characterized by high eccentricity, intermediate ice volume and no Heinrich events (MIS 6–7, the end of MIS 9, MIS 15 and MIS 17. We therefore suggest that the occurrence of Heinrich events influences the response of δ18Oatm to precession.

  13. Stationary rotary force waves on the liquid-air core interface of a swirl atomizer

    Science.gov (United States)

    Chinn, J. J.; Cooper, D.; Yule, A. J.; Nasr, G. G.

    2016-10-01

    A one-dimensional wave equation, applicable to the waves on the surface of the air-core of a swirl atomizer is derived analytically, by analogy to the similar one-dimensional wave equation derivation for shallow-water gravity waves. In addition an analogy to the flow of water over a weir is used to produce an analytical derivation of the flow over the lip of the outlet of a swirl atomizer using the principle of maximum flow. The principle of maximum flow is substantiated by reference to continuity of the discharge in the direction of streaming. For shallow-water gravity waves, the phase velocity is the same expression as for the critical velocity over the weir. Similarly, in the present work, the wave phase velocity on the surface of the air-core is shown to be the same expression as for the critical velocity for the flow at the outlet. In addition, this wave phase velocity is shown to be the square root of the product of the radial acceleration and the liquid thickness, as analogous with the wave phase velocity for shallow water gravity waves, which is the square root of the product of the acceleration due to gravity and the water depth. The work revisits the weirs and flumes work of Binnie et al. but using a different methodology. The results corroborate with the work of Binnie. High speed video, Laser Doppler Anemometry and deflected laser beam experimental work has been carried out on an oversize Perspex (Plexiglas) swirl atomizer. Three distinctive types of waves were detected: helical striations, low amplitude random ripples and low frequency stationary waves. It is the latter wave type that is considered further in this article. The experimentally observed waves appear to be stationary upon the axially moving flow. The mathematical analysis allows for the possibility of a negative value for the phase velocity expression. Therefore the critical velocity and the wave phase velocity do indeed lead to stationary waves in the atomizer. A quantitative comparison

  14. Probing biofouling resistant polymer brush surfaces by atomic force microscopy based force spectroscopy.

    Science.gov (United States)

    Schön, Peter; Kutnyanszky, Edit; ten Donkelaar, Bas; Santonicola, M Gabriella; Tecim, Tugba; Aldred, Nick; Clare, Anthony S; Vancso, G Julius

    2013-02-01

    The protein repellency and biofouling resistance of zwitterionic poly(sulfobetaine methacrylate)(pSBMA) brushes grafted via surface initiated polymerization (SIP) from silicon and glass substrata was assessed using atomic force microscopy (AFM) adherence experiments. Laboratory settlement assays were conducted with cypris larvae of the barnacle Balanus amphitrite. AFM adherence includes the determination of contact rupture forces when AFM probe tips are withdrawn from the substratum. When the surface of the AFM tip is modified, adherence can be assessed with chemical specifity using a method known as chemical force microscopy (CFM). In this study, AFM tips were chemically functionalized with (a) fibronectin- here used as model for a nonspecifically adhering protein - and (b) arginine-glycine-aspartic acid (RGD) peptide motifs covalently attached to poly(methacrylic acid) (PMAA) brushes as biomimics of cellular adhesion receptors. Fibronectin functionalized tips showed significantly reduced nonspecific adhesion to pSBMA-modified substrata compared to bare gold (2.3±0.75 nN) and octadecanethiol (ODT) self-assembled monolayers (1.3±0.75 nN). PMAA and PMAA-RGD modified probes showed no significant adhesion to pSBMA modified silicon substrata. The results gathered through AFM protein adherence studies were complemented by laboratory fouling studies, which showed no adhesion of cypris larvae of Balanus amphitrite on pSBMA. With regard to its unusually high non-specific adsorption to a wide variety of materials the behavior of fibronectin is analogous to the barnacle cyprid temporary adhesive that also binds well to surfaces differing in polarity, charge and free energy. The antifouling efficacy of pSBMA may, therefore, be directly related to the ability of this surface to resist nonspecific protein adsorption. PMID:23138001

  15. The impact of a forced reduction in traffic volumes on urban air pollution

    International Nuclear Information System (INIS)

    The Middle East military conflict of summer 2006 resulted in a few weeks in which the city of Haifa, Israel, and its environs experienced very profound variations in the commercial and personal activities. Large industrial plants continued almost normal operations but activities of small scale industry, shopping, and personal commuting were drastically reduced, leading to a dramatic decrease in the commercial and personal traffic volumes. This period of reduced activity serves as a real life experiment for assessment and demonstration of the impact that human activity, and mainly road traffic, may have on the air pollution levels in a bustling middle-sized city. The analysis is made especially sharp and reliable due to the abruptness of the beginning and the end of the reduced activity period, its length, and the stable summer meteorological conditions in the eastern Mediterranean region. The reduced traffic volumes resulted in lowered levels of NO2, hydrocarbons and particulate matter. The decrease in these pollutants' mean concentration was significantly larger than the reduction in the mean traffic volume. Slightly higher mean O3 concentrations were observed during the reduced traffic period. (author)

  16. Chiral EFT based nuclear forces: achievements and challenges

    Science.gov (United States)

    Machleidt, R.; Sammarruca, F.

    2016-08-01

    During the past two decades, chiral effective field theory has become a popular tool to derive nuclear forces from first principles. Two-nucleon interactions have been worked out up to sixth order of chiral perturbation theory and three-nucleon forces up to fifth order. Applications of some of these forces have been conducted in nuclear few- and many-body systems—with a certain degree of success. But in spite of these achievements, we are still faced with great challenges. Among them is the issue of a proper uncertainty quantification of predictions obtained when applying these forces in ab initio calculations of nuclear structure and reactions. A related problem is the order by order convergence of the chiral expansion. We start this review with a pedagogical introduction and then present the current status of the field of chiral nuclear forces. This is followed by a discussion of representative examples for the application of chiral two- and three-body forces in the nuclear many-body system including convergence issues.

  17. Chiral EFT based nuclear forces: Achievements and challenges

    CERN Document Server

    Machleidt, R

    2016-01-01

    During the past two decades, chiral effective field theory has become a popular tool to derive nuclear forces from first principles. Two-nucleon interactions have been worked out up to sixth order of chiral perturbation theory and three-nucleon forces up to fifth order. Applications of some of these forces have been conducted in nuclear few- and many-body systems---with a certain degree of success. But in spite of these achievements, we are still faced with great challenges. Among them is the issue of a proper uncertainty quantification of predictions obtained when applying these forces in {\\it ab initio} calculations of nuclear structure and reactions. A related problem is the order by order convergence of the chiral expansion. We start this review with a pedagogical introduction and then present the current status of the field of chiral nuclear forces. This is followed by a discussion of representative examples for the application of chiral two- and three-body forces in the nuclear many-body system includin...

  18. High-precision horizontally directed force measurements for high dead loads based on a differential electromagnetic force compensation system

    Science.gov (United States)

    Vasilyan, Suren; Rivero, Michel; Schleichert, Jan; Halbedel, Bernd; Fröhlich, Thomas

    2016-04-01

    In this paper, we present an application for realizing high-precision horizontally directed force measurements in the order of several tens of nN in combination with high dead loads of about 10 N. The set-up is developed on the basis of two identical state-of-the-art electromagnetic force compensation (EMFC) high precision balances. The measurement resolution of horizontally directed single-axis quasi-dynamic forces is 20 nN over the working range of  ±100 μN. The set-up operates in two different measurement modes: in the open-loop mode the mechanical deflection of the proportional lever is an indication of the acting force, whereas in the closed-loop mode it is the applied electric current to the coil inside the EMFC balance that compensates deflection of the lever to the offset zero position. The estimated loading frequency (cutoff frequency) of the set-up in the open-loop mode is about 0.18 Hz, in the closed-loop mode it is 0.7 Hz. One of the practical applications that the set-up is suitable for is the flow rate measurements of low electrically conducting electrolytes by applying the contactless technique of Lorentz force velocimetry. Based on a previously developed set-up which uses a single EMFC balance, experimental, theoretical and numerical analyses of the thermo-mechanical properties of the supporting structure are presented.

  19. Via dialogue or messaging how Air Force Public Affairs is leveraging social media

    OpenAIRE

    Westover, David S.

    2010-01-01

    Approved for public release; distribution is unlimited U.S. military public affairs (PA) policy has witnessed a comprehensive evolution in trust and transparency since the Vietnam War. This evolution continues to this day as Internet-based social media have drastically changed the way information is shared between individuals, groups and organizations. As a result of this huge paradigm shift, the military PA professional must grapple with these emerging communication platforms not only t...

  20. FORCE RIPPLE SUPPRESSION TECHNOLOGY FOR LINEAR MOTORS BASED ON BACK PROPAGATION NEURAL NETWORK

    Institute of Scientific and Technical Information of China (English)

    ZHANG Dailin; CHEN Youping; AI Wu; ZHOU Zude; KONG Ching Tom

    2008-01-01

    Various force disturbances influence the thrust force of linear motors when a linear motor (LM) is running. Among all of force disturbances, the force ripple is the dominant while a linear motor runs in low speed. In order to suppress the force ripple, back propagation(BP) neural network is proposed to learn the function of the force ripple of linear motors, and the acquisition method of training samples is proposed based on a disturbance observer. An off-line BP neural network is used mainly because of its high running efficiency and the real-time requirement of the servo control system of a linear motor. By using the function, the force ripple is on-line compensated according to the position of the LM. The experimental results show that the force ripple is effectively suppressed by the compensation of the BP neural network.

  1. Rasch model based analysis of the Force Concept Inventory

    Directory of Open Access Journals (Sweden)

    Maja Planinic

    2010-03-01

    Full Text Available The Force Concept Inventory (FCI is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear measures for persons and items from raw test scores and which can provide important insight in the structure and functioning of the test (how item difficulties are distributed within the test, how well the items fit the model, and how well the items work together to define the underlying construct. The data for the Rasch analysis come from the large-scale research conducted in 2006-07, which investigated Croatian high school students’ conceptual understanding of mechanics on a representative sample of 1676 students (age 17–18 years. The instrument used in research was the FCI. The average FCI score for the whole sample was found to be (27.7±0.4%, indicating that most of the students were still non-Newtonians at the end of high school, despite the fact that physics is a compulsory subject in Croatian schools. The large set of obtained data was analyzed with the Rasch measurement computer software WINSTEPS 3.66. Since the FCI is routinely used as pretest and post-test on two very different types of population (non-Newtonian and predominantly Newtonian, an additional predominantly Newtonian sample (N=141, average FCI score of 64.5% of first year students enrolled in introductory physics course at University of Zagreb was also analyzed. The Rasch model based analysis suggests that the FCI has succeeded in defining a sufficiently unidimensional construct for each population. The analysis of fit of data to the model found no grossly misfitting items which would degrade measurement. Some items with larger misfit and items with significantly different difficulties in the two samples of students do require further

  2. Problem decomposition by mutual information and force-based clustering

    Science.gov (United States)

    Otero, Richard Edward

    The scale of engineering problems has sharply increased over the last twenty years. Larger coupled systems, increasing complexity, and limited resources create a need for methods that automatically decompose problems into manageable sub-problems by discovering and leveraging problem structure. The ability to learn the coupling (inter-dependence) structure and reorganize the original problem could lead to large reductions in the time to analyze complex problems. Such decomposition methods could also provide engineering insight on the fundamental physics driving problem solution. This work forwards the current state of the art in engineering decomposition through the application of techniques originally developed within computer science and information theory. The work describes the current state of automatic problem decomposition in engineering and utilizes several promising ideas to advance the state of the practice. Mutual information is a novel metric for data dependence and works on both continuous and discrete data. Mutual information can measure both the linear and non-linear dependence between variables without the limitations of linear dependence measured through covariance. Mutual information is also able to handle data that does not have derivative information, unlike other metrics that require it. The value of mutual information to engineering design work is demonstrated on a planetary entry problem. This study utilizes a novel tool developed in this work for planetary entry system synthesis. A graphical method, force-based clustering, is used to discover related sub-graph structure as a function of problem structure and links ranked by their mutual information. This method does not require the stochastic use of neural networks and could be used with any link ranking method currently utilized in the field. Application of this method is demonstrated on a large, coupled low-thrust trajectory problem. Mutual information also serves as the basis for an

  3. Rasch Model Based Analysis of the Force Concept Inventory

    Science.gov (United States)

    Planinic, Maja; Ivanjek, Lana; Susac, Ana

    2010-01-01

    The Force Concept Inventory (FCI) is an important diagnostic instrument which is widely used in the field of physics education research. It is therefore very important to evaluate and monitor its functioning using different tools for statistical analysis. One of such tools is the stochastic Rasch model, which enables construction of linear…

  4. Marin recipientundersøgelse ved Thule Air Base 2002

    DEFF Research Database (Denmark)

    Glahder, C. M.; Asmund, G.; Mayer, P.;

    I 2002 gennemførte Danmarks Miljøundersøgelser en recipientundersøgelse ud for Thule Air Base (TAB) for at vurdere, om aktiviteterne og specielt de efterladte dumpe på TAB har belastet det marine miljø med forurenende stoffer. Undersøgelsen viser, at der findes flere forurenings-kilder som f. eks...... findes i Wolstenholme Fjord og Bylot Sund området og regionen som helhed. Det væsentligste forureningsproblem i forbindelse med akti-viteterne på Thule Air Base synes at være PCBerne, idet denne kontaminantgruppe viser forhøjede koncentrationer på 2-30 gange både lokalt og regionalt. PCB...

  5. Measure Guideline: Combination Forced-Air Space and Tankless Domestic Hot Water Heating Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rudd, A.

    2012-08-01

    This document describes design and application guidance for combination space and tankless domestic hot water heating systems (combination systems) used in residential buildings, based on field evaluation, testing, and industry meetings conducted by Building Science Corporation. As residential building enclosure improvements continue to drive heating loads down, using the same water heating equipment for both space heating and domestic water heating becomes attractive from an initial cost and space-saving perspective. This topic is applicable to single- and multi-family residential buildings, both new and retrofitted.

  6. Measure Guideline. Combination Forced-Air Space and Tankless Domestic Hot Water Heating Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rudd, Armin [Building Science Corporation Industry Team (BSC), Somerville, MA (United States)

    2012-08-01

    This document describes design and application guidance for combination space and tankless domestic hot water heating systems (combination systems) used in residential buildings, based on field evaluation, testing, and industry meetings conducted by Building Science Corporation. As residential building enclosure improvements continue to drive heating loads down, using the same water heating equipment for both space heating and domestic water heating becomes attractive from an initial cost and space-saving perspective. This topic is applicable to single- and multi-family residential buildings, both new and retrofitted.

  7. Resfriamento de banana-prata com ar forçado Forced-air cooling of banana

    Directory of Open Access Journals (Sweden)

    BÁRBARA TERUEL

    2002-04-01

    Full Text Available Este trabalho apresenta as curvas de resfriamento de banana-prata (Musa balbisiana Colla e os valores do tempo de meio e sete oitavos de resfriamento, partindo do cálculo da Taxa Adimensional de Temperatura. Os frutos foram resfriados num sistema com ar forçado a 7ºC, umidade relativa de 87,6±3,8%, e velocidade do ar entre 1 e 0,2 m/s. Aplicou-se um delineamento experimental inteiramente casualizado, usando um esquema fatorial 2x2 (dois fluxos de ar (fatores e duas embalagens (níveis, para um nível de significância de 10%. Os fluxos de ar foram 1.933 a 1.160 m³/h, e as embalagens se diferenciaram pela porcentagem de área de abertura disponível para a ventilação (40 e 3,2%. Foi constatada uma diferença significativa no tempo de resfriamento, tanto quando aplicadas as duas taxas de ar como quando usadas as duas embalagens. O menor tempo de resfriamento foi atingido no tratamento que combinou a maior taxa de ar (1.933 m³/h com a embalagem de maior área de aberturas (40%. O maior tempo de resfriamento foi atingido no tratamento que combinou a menor taxa de ar (1160 m³/h com a embalagem de 3,2% de área efetiva de abertura. Os resultados obtidos demonstram que o tempo de resfriamento depende, em grande medida, da taxa de ar e do tipo de embalagem usada. O tempo de resfriamento variou em média entre 117 a 555 min, dependendo do tratamento aplicado. Não se constatou diferença significativa nas perdas de massa entre os diferentes tratamentos.This work presents the cooling curves for bananas Prata, (Musa balbisiana Colla, and determinates half-cooling and seven-eight cooling times and the cooling rate. Bananas were kept in a cold room with a forced-air system at 7ºC and RH = 87.6±3.8%. The experiment was conducted in a 2x2 factorial design, to test the effects of two flow rates (factors of air passing through the product, and two types of boxes (levels. The statistical analysis was performed at p<0.10. The air flow rates were 1933

  8. SAMIRA - SAtellite based Monitoring Initiative for Regional Air quality

    Science.gov (United States)

    Schneider, Philipp; Stebel, Kerstin; Ajtai, Nicolae; Diamandi, Andrei; Horalek, Jan; Nicolae, Doina; Stachlewska, Iwona; Zehner, Claus

    2016-04-01

    Here, we present a new ESA-funded project entitled Satellite based Monitoring Initiative for Regional Air quality (SAMIRA), which aims at improving regional and local air quality monitoring through synergetic use of data from present and upcoming satellites, traditionally used in situ air quality monitoring networks and output from chemical transport models. Through collaborative efforts in four countries, namely Romania, Poland, the Czech Republic and Norway, all with existing air quality problems, SAMIRA intends to support the involved institutions and associated users in their national monitoring and reporting mandates as well as to generate novel research in this area. Despite considerable improvements in the past decades, Europe is still far from achieving levels of air quality that do not pose unacceptable hazards to humans and the environment. Main concerns in Europe are exceedances of particulate matter (PM), ground-level ozone, benzo(a)pyrene (BaP) and nitrogen dioxide (NO2). While overall sulfur dioxide (SO2) emissions have decreased in recent years, regional concentrations can still be high in some areas. The objectives of SAMIRA are to improve algorithms for the retrieval of hourly aerosol optical depth (AOD) maps from SEVIRI, and to develop robust methods for deriving column- and near-surface PM maps for the study area by combining satellite AOD with information from regional models. The benefit to existing monitoring networks (in situ, models, satellite) by combining these datasets using data fusion methods will be tested for satellite-based NO2, SO2, and PM/AOD. Furthermore, SAMIRA will test and apply techniques for downscaling air quality-related EO products to a spatial resolution that is more in line with what is generally required for studying urban and regional scale air quality. This will be demonstrated for a set of study sites that include the capitals of the four countries and the highly polluted areas along the border of Poland and the

  9. Cold war historic properties of the 21st Space Wing Air Force Space Command

    Energy Technology Data Exchange (ETDEWEB)

    Hoffecker, J.F.; Whorton, M. [Argonne National Lab., IL (United States); Buechler, C.R. [Peterson, AFB, CO (United States)

    1996-03-01

    A Legacy-funded inventory and evaluation of facilities dating to the Cold War era was conducted for the USAF 21{sup ST} Space Wing (AFSPC). The mission of the Wing includes early warning of missile launches and detection and tracking of space objects. The political and military strategic context for these facilities was developed through an overview of Cold War history, subdivided into four major periods: (1) origins of the conflict, (2) confrontation and crisis, (3) sustained superpower balance based on mutual deterrence, and (4) renewed confrontation and collapse of the Soviet Union. The enormous importance of early warning systems in maintaining the balance of power between the USA and the Soviet Union is discussed in more detail as a subset of the general context of the Cold War history to provide additional background for evaluating the 21{sup ST} Space Wing systems. In addition, a history of each installation was prepared and placed in the context of the broader history of the Cold War. For instance, the effort to develop a credible nuclear threat in the early 1950s is represented by the construction of Thule AB as a forward bomber base in 1951. The growing concern with a Soviet ICBM threat in the late 1950s is reflected in the construction of BMEWS at Thule AB and Clear AS during 1958-1961. Development of an antiballistic missile (ABM) system, subsequently abandoned during the 1970s, is represented by the Safeguard System at Cavalier AS. The U.S. response to the Soviet submarine-launched missile capability during the 1970s is embodied in the deployment of phased-array radar systems to cover the ocean flanks of North America at Cape Cod AS (and later at Eldorado AS). The establishment of AFSPC at Peterson AFB in 1982 reflects the increased strategic importance of space in the later phases of the Cold War. A set of recommendations regarding NRHP eligibility and management of Cold War historic properties was developed as part of the inventory.

  10. An Examination of Some Behavioral Correlates of Air Force Undergraduate Pilot Training through the Use of the Porter and Lawler Performance/Satisfaction Model.

    Science.gov (United States)

    Lohmann, David P.

    The study tested the applicability of portions of the Porter and Lawler model in a cognitive training environment and examined the relationships among some behavioral variables in Air Force Undergraduate Pilot Training. The variables analyzed were the Maslow need hierarchy, effort, abilities, role perceptions, performance, satisfaction and the…

  11. 外军飞行人员夜视训练发展%Night vision training in foreign air forces

    Institute of Scientific and Technical Information of China (English)

    吴铨; 周晴霖; 秦志峰; 郑媛憬

    2013-01-01

    Objective Night vision device has been developed and exerted its effects at battle field for decades.And its application also extended to flight mission.Consequently,night vision device related accident,such as spatial disorientation accident,becomes serious due to the constraints either on human's chromatic vision and vision field.Night vision training or night vision goggle training emerges as the times require,and has applied in war conflicts.Countries of North Atlantic Treaty Organization (NATO) have established night vision training system and the execution is along with the standardization agreement.The night vision training system is introduced in the review upon the retrospect of night vision device and training history.Suggestions are raised as the references of building night vision training system in China.Literature resource and selection Research papers,reviews,workshop/meeting presentations and organization reports in the subjects regarding night vision/night vision device development and training.Literature quotation Thirty puhlished research articles,reports,reviews,and compilations.Literature synthesis The night vision training in NATO countries covers the flying personnel of fixed and rotary wing aircrafts.The initial and refresh training cycle is applying in accordance with the standardization agreement.The classroom education and practice compose the mode of training,and simulator based practice and actual flving tush the training towards to an advanced level-closer to the real mission.Fighte r pilot's night vision training had been effective in regional war conflicts and has become to systemic training approach.It would enable the pilot with night vision goggle maintaining effective observation in combat,such as air-toground attack.The night vision training will not only aim at keeping pilot's visual ability and safety but also at the efficiency and success of mission.So the comprehensive or mission orientated training leads the trend of

  12. Rigorous force field optimization principles based on statistical distance minimization

    Energy Technology Data Exchange (ETDEWEB)

    Vlcek, Lukas, E-mail: vlcekl1@ornl.gov [Chemical Sciences Division, Geochemistry & Interfacial Sciences Group, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6110 (United States); Joint Institute for Computational Sciences, University of Tennessee, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6173 (United States); Chialvo, Ariel A. [Chemical Sciences Division, Geochemistry & Interfacial Sciences Group, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6110 (United States)

    2015-10-14

    We use the concept of statistical distance to define a measure of distinguishability between a pair of statistical mechanical systems, i.e., a model and its target, and show that its minimization leads to general convergence of the model’s static measurable properties to those of the target. We exploit this feature to define a rigorous basis for the development of accurate and robust effective molecular force fields that are inherently compatible with coarse-grained experimental data. The new model optimization principles and their efficient implementation are illustrated through selected examples, whose outcome demonstrates the higher robustness and predictive accuracy of the approach compared to other currently used methods, such as force matching and relative entropy minimization. We also discuss relations between the newly developed principles and established thermodynamic concepts, which include the Gibbs-Bogoliubov inequality and the thermodynamic length.

  13. Low-temperature linear thermal rectifiers based on Coriolis forces

    Science.gov (United States)

    Suwunnarat, Suwun; Li, Huanan; Fleischmann, Ragnar; Kottos, Tsampikos

    2016-04-01

    We demonstrate that a three-terminal harmonic symmetric chain in the presence of a Coriolis force, produced by a rotating platform that is used to place the chain, can produce thermal rectification. The direction of heat flow is reconfigurable and controlled by the angular velocity Ω of the rotating platform. A simple three-terminal triangular lattice is used to demonstrate the proposed principle.

  14. Low-temperature linear thermal rectifiers based on Coriolis forces.

    Science.gov (United States)

    Suwunnarat, Suwun; Li, Huanan; Fleischmann, Ragnar; Kottos, Tsampikos

    2016-04-01

    We demonstrate that a three-terminal harmonic symmetric chain in the presence of a Coriolis force, produced by a rotating platform that is used to place the chain, can produce thermal rectification. The direction of heat flow is reconfigurable and controlled by the angular velocity Ω of the rotating platform. A simple three-terminal triangular lattice is used to demonstrate the proposed principle.

  15. A Knowledge base representing Porter's Five Forces Model

    OpenAIRE

    De Swaan Arons, H.; Waalewijn, Ph.

    1999-01-01

    textabstractStrategic Analysis and Planning is a field in which expertise and experience are key factors. In order to decide on strategic matters such as the competitive position of a company experts heavily lean on their ability to reason with uncertain or incomplete knowledge, or in other words on their experience and expertise. An important aspect is to assess a company's profit potential in the industry for which Porter's Competitive Forces Model is by far the most widely used framework. ...

  16. Air

    Science.gov (United States)

    ... house) Industrial emissions (like smoke and chemicals from factories) Household cleaners (spray cleaners, air fresheners) Car emissions (like carbon monoxide) *All of these things make up “particle pollution.” They mostly come from cars, trucks, buses, and ...

  17. Application of Residual-Based EWMA Control Charts for Detecting Faults in Variable-Air-Volume Air Handling Unit System

    OpenAIRE

    Haitao Wang

    2016-01-01

    An online robust fault detection method is presented in this paper for VAV air handling unit and its implementation. Residual-based EWMA control chart is used to monitor the control processes of air handling unit and detect faults of air handling unit. In order to provide a level of robustness with respect to modeling errors, control limits are determined by incorporating time series model uncertainty in EWMA control chart. The fault detection method proposed was tested and validated using re...

  18. Air Force Reusable Booster System: A Quick-look, Design Focused Modeling and Cost Analysis Study

    Science.gov (United States)

    Zapata, Edgar

    2011-01-01

    This paper presents a method and an initial analysis of the costs of a reusable booster system (RBS) as envisioned by the US Department of Defense (DoD) and numerous initiatives that form the concept of Operationally Responsive Space (ORS). This paper leverages the knowledge gained from decades of experience with the semi-reusable NASA Space Shuttle to understand how the costs of a military next generation semi-reusable space transport might behave in the real world - and how it might be made as affordable as desired. The NASA Space Shuttle had a semi-expendable booster, that being the reusable Solid Rocket MotorslBoosters (SRMlSRB) and the expendable cryogenic External Tank (ET), with a reusable cargo and crew capable orbiter. This paper will explore DoD concepts that invert this architectural arrangement, using a reusable booster plane that flies back to base soon after launch, with the in-space elements of the launch system being the expendable portions. Cost estimating in the earliest stages of any potential, large scale program has limited usefulness. As a result, the emphasis here is on developing an approach, a structure, and the basic concepts that could continue to be matured as the program gains knowledge. Where cost estimates are provided, these results by necessity carry many caveats and assumptions, and this analysis becomes more about ways in which drivers of costs for diverse scenarios can be better understood. The paper is informed throughout with a design-for-cost philosophy whereby the design and technology features of the proposed RBS (who and what, the "architecture") are taken as linked at the hip to a desire to perform a certain mission (where and when), and together these inform the cost, responsiveness, performance and sustainability (how) of the system. Concepts for developing, acquiring, producing or operating the system will be shown for their inextricable relationship to the "architecture" of the system, and how these too relate to costs

  19. Objective Lightning Probability Forecasting for Kennedy Space Center and Cape Canaveral Air Force Station, Phase III

    Science.gov (United States)

    Crawford, Winifred C.

    2010-01-01

    The AMU created new logistic regression equations in an effort to increase the skill of the Objective Lightning Forecast Tool developed in Phase II (Lambert 2007). One equation was created for each of five sub-seasons based on the daily lightning climatology instead of by month as was done in Phase II. The assumption was that these equations would capture the physical attributes that contribute to thunderstorm formation more so than monthly equations. However, the SS values in Section 5.3.2 showed that the Phase III equations had worse skill than the Phase II equations and, therefore, will not be transitioned into operations. The current Objective Lightning Forecast Tool developed in Phase II will continue to be used operationally in MIDDS. Three warm seasons were added to the Phase II dataset to increase the POR from 17 to 20 years (1989-2008), and data for October were included since the daily climatology showed lightning occurrence extending into that month. None of the three methods tested to determine the start of the subseason in each individual year were able to discern the start dates with consistent accuracy. Therefore, the start dates were determined by the daily climatology shown in Figure 10 and were the same in every year. The procedures used to create the predictors and develop the equations were identical to those in Phase II. The equations were made up of one to three predictors. TI and the flow regime probabilities were the top predictors followed by 1-day persistence, then VT and Ll. Each equation outperformed four other forecast methods by 7-57% using the verification dataset, but the new equations were outperformed by the Phase II equations in every sub-season. The reason for the degradation may be due to the fact that the same sub-season start dates were used in every year. It is likely there was overlap of sub-season days at the beginning and end of each defined sub-season in each individual year, which could very well affect equation

  20. Causality of global warming seen from observations: a scale analysis of driving force of the surface air temperature time series in the Northern Hemisphere

    Science.gov (United States)

    Yang, Peicai; Wang, Geli; Zhang, Feng; Zhou, Xiuji

    2016-05-01

    By using the slow feature analysis, we reconstructed the driving force for an observed monthly surface air temperature anomaly time series in the northern hemisphere. Wavelet transformation technique was then used to analyze the scale structure of the derived driving force and its causal relationship with global warming. Results showed that the driving force for the analyzed temperature climate system included two independent degrees of freedom which respectively represented the effects of 22-year solar cycle and Atlantic Multidecadal Oscillation on the climate. More importantly, the driving force is modulated in amplitude by signals with much longer time periods. The modulation controls the energy input to the climate system and its effect on the global warming is decisive. In addition, through analyzing phase transitions from zero to extremes of the modulating signals, we provide a projection for the future trend of the surface air temperature. In specific, in the next 45-65 years, the driving force will continue to rise which will drive the air temperature even warmer. This is a long term natural trend determined by the modulating amplitude signals, but not directly related to human activity.

  1. Problem based teaching in indoor Air Science and Practice

    DEFF Research Database (Denmark)

    Kjærgaard, Søren K.

    1999-01-01

    on the experiment was that the method was useful even in a very mixed group, and highly motivating for the teachers. Similarly, at the MPH-school at Aarhus University, the method has given good experiences in a multidisciplinary group of mature students. Their task have been to evaluate health problems during...... a month achieving, evaluating literature, and using a strategic algorithm based on 1) problem analysis, 2) setting goals and target groups, 3) selecting intervention, 3) implementation of intervention, and 4) evaluation. An example has been childhood asthma and indoor air pollution. It is suggested......-disciplinary group work with facilitating tutors using a problem based training technique....

  2. Base force element method of complementary energy principle for large rotation problems

    Institute of Scientific and Technical Information of China (English)

    Yijiang Peng; Yinghua Liu

    2009-01-01

    Using the concept of the base forces, a new finite element method (base force element method, BFEM) based on the complementary energy principle is presented for accurate modeling of structures with large displacements and large rotations. First, the complementary energy of an element is described by taking the base forces as state variables, and is then separated into deformation and rotation parts for the case of large deformation. Second, the control equations of the BFEM based on the complementary energy principle are derived using the Lagrange multiplier method. Nonlinear procedure of the BFEM is then developed. Finally, several examples are analyzed to illustrate the reliability and accuracy of the BFEM.

  3. Developing Empirical Lightning Cessation Forecast Guidance for the Cape Canaveral Air Force Station and Kennedy Space Center

    Science.gov (United States)

    Stano, Geoffrey T.; Fuelberg, Henry E.; Roeder, William P.

    2010-01-01

    This research addresses the 45th Weather Squadron's (45WS) need for improved guidance regarding lightning cessation at Cape Canaveral Air Force Station and Kennedy Space Center (KSC). KSC's Lightning Detection and Ranging (LDAR) network was the primary observational tool to investigate both cloud-to-ground and intracloud lightning. Five statistical and empirical schemes were created from LDAR, sounding, and radar parameters derived from 116 storms. Four of the five schemes were unsuitable for operational use since lightning advisories would be canceled prematurely, leading to safety risks to personnel. These include a correlation and regression tree analysis, three variants of multiple linear regression, event time trending, and the time delay between the greatest height of the maximum dBZ value to the last flash. These schemes failed to adequately forecast the maximum interval, the greatest time between any two flashes in the storm. The majority of storms had a maximum interval less than 10 min, which biased the schemes toward small values. Success was achieved with the percentile method (PM) by separating the maximum interval into percentiles for the 100 dependent storms.

  4. US Air Force Space Weather Products Rapid Prototyping Efforts - Solar Radio Background/Burst Effects and Meteor Effects Products

    Science.gov (United States)

    Quigley, S.; Scro, K.

    2001-12-01

    The Space Vehicles Directorate of the Air Force Research Laboratory (AFRL/VSB) has joined efforts with the Technology Applications Division of the Space and Missile Systems Center (SMC Det 11/CIT) to rapidly transition space weather research into prototype, operational, system-impact products. These Rapid Prototyping Center (RPC) products are used to analyze, specify, and forecast the effects of the near-earth space environment on Department of Defense systems and communications. A summary of RPC activity is provided. Emphasis will be placed on current products under development, to include Solar Radio Background/Burst Effects (SoRBE) and Meteor Effects (ME) products. These will be added to real-time operations in the near future. SoRBE specifies the detrimental interference effects of background and event-level solar radio output on radar observations and satellite communications. ME will provide general meteor shower "nowcast" and forecast information, along with more specific meteor and meteor shower impact, radar clutter, and bolide (exploding meteor) effects. A brief overview of recently delivered products: Radar Auroral Clutter, Satellite Scintillation, HF Illumination, and GPS Single-Frequency Error Maps will also be provided.

  5. Evaluation of the effects of exposure to organic solvents and hazardous noise among US Air Force Reserve personnel

    Directory of Open Access Journals (Sweden)

    Hayley Hughes

    2013-01-01

    Full Text Available Hearing loss affects many workers including those in the military and may be caused by noise, medications, and chemicals. Exposures to some chemicals may lead to an increase in the incidence of hearing loss when combined with hazardous noise. This retrospective study evaluated the risk for hearing loss among Air Force Reserve personnel exposed to occupational noise with and without exposures to toluene, styrene, xylene, benzene, and JP-8 (jet fuel. Risk factors associated with hearing loss were determined using logistic and linear regression. Stratified analysis was used to evaluate potential interaction between solvent and noise exposure. The majority of the subjects were male (94.6% and 35 years or older on the date of their first study audiogram (66%. Followed for an average of 3.2 years, 9.2% of the study subjects had hearing loss in at least one ear. Increasing age (odds ratio [OR] = 1.03 per year of age and each year of follow-up time (OR = 1.23 were significantly associated with hearing loss. Low and moderate solvent exposures were not associated with hearing loss. Linear regression demonstrated that hearing loss was significantly associated with age at first study audiogram, length of follow-up time, and exposure to noise. Hearing decreased by 0.04 decibels for every decibel increase in noise level or by almost half a decibel (0.4 dB for every 10 decibel increase in noise level.

  6. Mental health diagnoses and counseling among pilots of remotely piloted aircraft in the United States Air Force.

    Science.gov (United States)

    Otto, Jean L; Webber, Bryant J

    2013-03-01

    Remotely piloted aircraft (RPA), also known as drones, have been used extensively in the recent conflicts in Iraq and Afghanistan. Although RPA pilots in the U.S. Air Force (USAF) have reported high levels of stress and fatigue, rates of mental health (MH) diagnoses and counseling in this population are unknown. We calculated incidence rates of 12 specific MH outcomes among all active component USAF RPA pilots between 1 October 2003 and 31 December 2011, and by various demographic and military variables. We compared these rates to those among all active component USAF manned aircraft (MA) pilots deployed to Iraq/Afghanistan during the same period. The unadjusted incidence rates of all MH outcomes among RPA pilots (n=709) and MA pilots (n=5,256) were 25.0 per 1,000 person-years and 15.9 per 1,000 person-years, respectively (adjusted incidence rate ratio=1.1, 95% confidence interval=0.9-1.5; adjusted for age, number of deployments, time in service, and history of any MH outcome). Th ere was no significant difference in the rates of MH diagnoses, including post-traumatic stress disorder, depressive disorders, and anxiety disorders between RPA and MA pilots. Military policymakers and clinicians should recognize that RPA and MA pilots have similar MH risk profiles.

  7. Performance evaluation of direct forced-air total solids and Kjeldahl total nitrogen methods: 1990 through 1995.

    Science.gov (United States)

    Lynch, J M; Barbano, D M; Healy, P A; Fleming, J R

    1997-01-01

    Results from collaborative studies of the performance of the direct forced-air oven-drying method for determination of milk total solids content (AOAC Method 990.20) and the Kjeldahl total nitrogen method for determination of milk total nitrogen content (AOAC Method 991.20) were published in 1989 and 1990, respectively. Method performance was characterized by using the harmonized ISO/IU-PAC/AOAC guidelines for method validation, and the methods now have final action status. During 1990 through 1995, the split sample collaborative study format was used to monitor the performance of these methods as part of a multilaboratory quality assurance program. Seven blind duplicate milk materials were sent from a central laboratory once every 2 months to participating laboratories. Data were analyzed with the same statistical procedures used in the original collaborative studies. Compared with the original collaborative study, the repeatability and reproducibility of the oven-drying method improved over time. For the Kjeldahl total nitrogen method, within-laboratory repeatability improved slightly, whereas between-laboratory reproducibility was similar to but not always as good as in the original study. The results demonstrate that the statistical protocol for collaborative studies can be used effectively as the basis for a multilaboratory quality assurance program and that the method performance achieved in a collaborative study can be maintained and even improved with time.

  8. Efficacy of aerial spray applications using fuselage booms on Air Force C-130H aircraft against mosquitoes and biting midges.

    Science.gov (United States)

    Breidenbaugh, Mark S; Haagsma, Karl A; Wojcik, George M; De Szalay, Ferenc A

    2009-12-01

    The effectiveness of a novel fuselage boom configuration was tested with flat-fan nozzles on U.S. Air Force C-130H aircraft to create ultra-low volume sprays to control mosquitoes (Culicidae) and biting midges (Ceratopogonidae). The mortality of mosquitoes and biting midges in bioassay cages and natural populations, using the organophosphate adulticide, naled, was measured. Mosquitoes in bioassay cages had 100% mortality at 639 m downwind in all single-pass spray trials, and most trials had >90% mortality up to 1491 m downwind. Mosquito mortality was negatively correlated with distance from the spray release point (r2 = 0.38, P 90%). In wide-area operational applications, numbers of mosquitoes from natural populations 1 wk postspray were 83% (range 55%-95%), lower than prespray numbers (P < 0.05). Biting midge numbers were reduced by 86% (range 53%-97%) on average (P = 0.051) after 7 days. The results of these field trials indicate that the fuselage boom configuration on C-130H aircraft are an effective method to conduct large-scale aerial sprays during military operations and public health emergencies. PMID:20099594

  9. Mental health diagnoses and counseling among pilots of remotely piloted aircraft in the United States Air Force.

    Science.gov (United States)

    Otto, Jean L; Webber, Bryant J

    2013-03-01

    Remotely piloted aircraft (RPA), also known as drones, have been used extensively in the recent conflicts in Iraq and Afghanistan. Although RPA pilots in the U.S. Air Force (USAF) have reported high levels of stress and fatigue, rates of mental health (MH) diagnoses and counseling in this population are unknown. We calculated incidence rates of 12 specific MH outcomes among all active component USAF RPA pilots between 1 October 2003 and 31 December 2011, and by various demographic and military variables. We compared these rates to those among all active component USAF manned aircraft (MA) pilots deployed to Iraq/Afghanistan during the same period. The unadjusted incidence rates of all MH outcomes among RPA pilots (n=709) and MA pilots (n=5,256) were 25.0 per 1,000 person-years and 15.9 per 1,000 person-years, respectively (adjusted incidence rate ratio=1.1, 95% confidence interval=0.9-1.5; adjusted for age, number of deployments, time in service, and history of any MH outcome). Th ere was no significant difference in the rates of MH diagnoses, including post-traumatic stress disorder, depressive disorders, and anxiety disorders between RPA and MA pilots. Military policymakers and clinicians should recognize that RPA and MA pilots have similar MH risk profiles. PMID:23550927

  10. Update: Exertional hyponatremia, active component, U.S. Army, Navy, Air Force, and Marine Corps, 2000-2015.

    Science.gov (United States)

    2016-03-01

    From 2000 through 2015, there were 1,542 incident diagnoses of exertional hyponatremia among active component members of the U.S. Army, Navy, Air Force, and Marine Corps. Annual incidence rates rose sharply from 2008 through 2010 but then decreased by more than 50% from 2010 through 2013. In 2015, the number of cases (n=116) increased by approximately 20% from the previous year. The recent increase in rates overall reflects increased rates in the Army and the Marine Corps. Relative to their respective counterparts, crude incidence rates of exertional hyponatremia for the entire 16-year surveillance period were higher among females, those in the youngest age group, Marines, and recruit trainees. Service members (particularly recruit trainees) and their supervisors must be vigilant for early signs of heat-related illnesses and must be knowledgeable of the dangers of excessive water consumption and the prescribed limits for water intake during prolonged physical activity (e.g., field training exercises, personal fitness training, recreational activities) in hot, humid weather. PMID:27030930

  11. Fuzzy force control of constrained robot manipulators based on impedance model in an unknown environment

    Institute of Scientific and Technical Information of China (English)

    LIU Hongyi; WANG Lei; WANG Fei

    2007-01-01

    To precisely implement the force control of robot manipulators in an unknown environment,a control strategy based on fuzzy prediction of the reference trajectory in the impedance model is developed.The force tracking experiments are executed in an open-architecture control system with different tracking velocities,different desired forces,different contact stiffnesses and different surface figurations.The corresponding force control results are compared and analyzed.The influences of unknown parameters of the environment on the contact force are analyzed based on experimental data,and the tunings of predictive scale factors are illustrated.The experimental results show that the desired trajectory in the impedance model is predicted exactly and rapidly in the cases that the contact surface is unknown,the contact stiffness changes,and the fuzzy force control algorithm has high adaptability to the unknown environment.

  12. Air

    International Nuclear Information System (INIS)

    In recent years several regulations and standards for air quality and limits for air pollution were issued or are in preparation by the European Union, which have severe influence on the environmental monitoring and legislation in Austria. This chapter of the environmental control report of Austria gives an overview about the legal situation of air pollution control in the European Union and in specific the legal situation in Austria. It gives a comprehensive inventory of air pollution measurements for the whole area of Austria of total suspended particulates, ozone, volatile organic compounds, nitrogen oxides, sulfur dioxide, carbon monoxide, heavy metals, benzene, dioxin, polycyclic aromatic hydrocarbons and eutrophication. For each of these pollutants the measured emission values throughout Austria are given in tables and geographical charts, the environmental impact is discussed, statistical data and time series of the emission sources are given and legal regulations and measures for an effective environmental pollution control are discussed. In particular the impact of fossil-fuel power plants on the air pollution is analyzed. (a.n.)

  13. The Influence of Physical and Physiological Cues on Atomic Force Microscopy-Based Cell Stiffness Assessment

    OpenAIRE

    Yu-Wei Chiou; Hsiu-Kuan Lin; Ming-Jer Tang; Hsi-Hui Lin; Ming-Long Yeh

    2013-01-01

    Atomic force microscopy provides a novel technique for differentiating the mechanical properties of various cell types. Cell elasticity is abundantly used to represent the structural strength of cells in different conditions. In this study, we are interested in whether physical or physiological cues affect cell elasticity in Atomic force microscopy (AFM)-based assessments. The physical cues include the geometry of the AFM tips, the indenting force and the operating temperature of the AFM. All...

  14. Study on the Driving Forces of Rocky Desertification in Guizhou Province Based on Variation Coefficient Method

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    [Objective] The aim was to study the driving forces of rocky desertification in Guizhou Province. [Method] Based on GIS and RS technology, the main driving forces of rocky desertification in Guizhou Province were analyzed by means of correlation analysis and variation coefficient method, and then the distribution of rocky desertification in Guizhou Province was assessed synthetically. [Result] The main driving forces of rocky desertification in Guizhou Province were vegetation cover, rainfall, peasant incom...

  15. A Noncontact Force Sensor Based on a Fiber Bragg Grating and Its Application for Corrosion Measurement

    OpenAIRE

    Antonio C. Bruno; Clara J. Pacheco

    2013-01-01

    A simple noncontact force sensor based on an optical fiber Bragg grating attached to a small magnet has been proposed and built. The sensor measures the force between the magnet and any ferromagnetic material placed within a few millimeters of the sensor. Maintaining the sensor at a constant standoff distance, material loss due to corrosion increases the distance between the magnet and the corroded surface, which decreases the magnetic force. This will decrease the strain in the optical fiber...

  16. Evaporation based micro pump integrated into a scanning force microscope probe

    OpenAIRE

    Heuck, F.; Hug, T.; Akiyama, Terunobu; Frederix, P. L. T. M.; Engel, A.; Meister, André; Heinzelmann, Harry; de Rooij, Nicolaas F.; Staufer, Urs

    2010-01-01

    A micro pump was integrated into a scanning force microscope probe for circulating liquid through its hollow cantilever and tip. The interior cross section of the cantilever was 2.25 μm × 3.75 μm. All fluidic parts were made of SiO2, while the tip apex was made of Si3N4. The key fabrication techniques were silicon wafer bonding and wet-oxidation. The pumping mechanism was relying on the enhanced evaporation at an enlarged water/air interface at the exit of the microchannel. Capillary forces c...

  17. Tool for Forecasting Cool-Season Peak Winds Across Kennedy Space Center and Cape Canaveral Air Force Station

    Science.gov (United States)

    Barrett, Joe H., III; Roeder, William P.

    2010-01-01

    The expected peak wind speed for the day is an important element in the daily morning forecast for ground and space launch operations at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The 45th Weather Squadron (45 WS) must issue forecast advisories for KSC/CCAFS when they expect peak gusts for >= 25, >= 35, and >= 50 kt thresholds at any level from the surface to 300 ft. In Phase I of this task, the 45 WS tasked the Applied Meteorology Unit (AMU) to develop a cool-season (October - April) tool to help forecast the non-convective peak wind from the surface to 300 ft at KSC/CCAFS. During the warm season, these wind speeds are rarely exceeded except during convective winds or under the influence of tropical cyclones, for which other techniques are already in use. The tool used single and multiple linear regression equations to predict the peak wind from the morning sounding. The forecaster manually entered several observed sounding parameters into a Microsoft Excel graphical user interface (GUI), and then the tool displayed the forecast peak wind speed, average wind speed at the time of the peak wind, the timing of the peak wind and the probability the peak wind will meet or exceed 35, 50 and 60 kt. The 45 WS customers later dropped the requirement for >= 60 kt wind warnings. During Phase II of this task, the AMU expanded the period of record (POR) by six years to increase the number of observations used to create the forecast equations. A large number of possible predictors were evaluated from archived soundings, including inversion depth and strength, low-level wind shear, mixing height, temperature lapse rate and winds from the surface to 3000 ft. Each day in the POR was stratified in a number of ways, such as by low-level wind direction, synoptic weather pattern, precipitation and Bulk Richardson number. The most accurate Phase II equations were then selected for an independent verification. The Phase I and II forecast methods were

  18. Error analysis and assessment of unsteady forces acting on a flapping wing micro air vehicle: free flight versus wind-tunnel experimental methods.

    Science.gov (United States)

    Caetano, J V; Percin, M; van Oudheusden, B W; Remes, B; de Wagter, C; de Croon, G C H E; de Visser, C C

    2015-10-01

    An accurate knowledge of the unsteady aerodynamic forces acting on a bio-inspired, flapping-wing micro air vehicle (FWMAV) is crucial in the design development and optimization cycle. Two different types of experimental approaches are often used: determination of forces from position data obtained from external optical tracking during free flight, or direct measurements of forces by attaching the FWMAV to a force transducer in a wind-tunnel. This study compares the quality of the forces obtained from both methods as applied to a 17.4 gram FWMAV capable of controlled flight. A comprehensive analysis of various error sources is performed. The effects of different factors, e.g., measurement errors, error propagation, numerical differentiation, filtering frequency selection, and structural eigenmode interference, are assessed. For the forces obtained from free flight experiments it is shown that a data acquisition frequency below 200 Hz and an accuracy in the position measurements lower than ± 0.2 mm may considerably hinder determination of the unsteady forces. In general, the force component parallel to the fuselage determined by the two methods compares well for identical flight conditions; however, a significant difference was observed for the forces along the stroke plane of the wings. This was found to originate from the restrictions applied by the clamp to the dynamic oscillations observed in free flight and from the structural resonance of the clamped FWMAV structure, which generates loads that cannot be distinguished from the external forces. Furthermore, the clamping position was found to have a pronounced influence on the eigenmodes of the structure, and this effect should be taken into account for accurate force measurements. PMID:26292289

  19. Error analysis and assessment of unsteady forces acting on a flapping wing micro air vehicle: free flight versus wind-tunnel experimental methods.

    Science.gov (United States)

    Caetano, J V; Percin, M; van Oudheusden, B W; Remes, B; de Wagter, C; de Croon, G C H E; de Visser, C C

    2015-08-20

    An accurate knowledge of the unsteady aerodynamic forces acting on a bio-inspired, flapping-wing micro air vehicle (FWMAV) is crucial in the design development and optimization cycle. Two different types of experimental approaches are often used: determination of forces from position data obtained from external optical tracking during free flight, or direct measurements of forces by attaching the FWMAV to a force transducer in a wind-tunnel. This study compares the quality of the forces obtained from both methods as applied to a 17.4 gram FWMAV capable of controlled flight. A comprehensive analysis of various error sources is performed. The effects of different factors, e.g., measurement errors, error propagation, numerical differentiation, filtering frequency selection, and structural eigenmode interference, are assessed. For the forces obtained from free flight experiments it is shown that a data acquisition frequency below 200 Hz and an accuracy in the position measurements lower than ± 0.2 mm may considerably hinder determination of the unsteady forces. In general, the force component parallel to the fuselage determined by the two methods compares well for identical flight conditions; however, a significant difference was observed for the forces along the stroke plane of the wings. This was found to originate from the restrictions applied by the clamp to the dynamic oscillations observed in free flight and from the structural resonance of the clamped FWMAV structure, which generates loads that cannot be distinguished from the external forces. Furthermore, the clamping position was found to have a pronounced influence on the eigenmodes of the structure, and this effect should be taken into account for accurate force measurements.

  20. Hadoop-Based Distributed System for Online Prediction of Air Pollution Based on Support Vector Machine

    Science.gov (United States)

    Ghaemi, Z.; Farnaghi, M.; Alimohammadi, A.

    2015-12-01

    The critical impact of air pollution on human health and environment in one hand and the complexity of pollutant concentration behavior in the other hand lead the scientists to look for advance techniques for monitoring and predicting the urban air quality. Additionally, recent developments in data measurement techniques have led to collection of various types of data about air quality. Such data is extremely voluminous and to be useful it must be processed at high velocity. Due to the complexity of big data analysis especially for dynamic applications, online forecasting of pollutant concentration trends within a reasonable processing time is still an open problem. The purpose of this paper is to present an online forecasting approach based on Support Vector Machine (SVM) to predict the air quality one day in advance. In order to overcome the computational requirements for large-scale data analysis, distributed computing based on the Hadoop platform has been employed to leverage the processing power of multiple processing units. The MapReduce programming model is adopted for massive parallel processing in this study. Based on the online algorithm and Hadoop framework, an online forecasting system is designed to predict the air pollution of Tehran for the next 24 hours. The results have been assessed on the basis of Processing Time and Efficiency. Quite accurate predictions of air pollutant indicator levels within an acceptable processing time prove that the presented approach is very suitable to tackle large scale air pollution prediction problems.

  1. Geothermally Coupled Well-Based Compressed Air Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, Casie L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bearden, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horner, Jacob A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cabe, James E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Appriou, Delphine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGrail, B. Peter [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-20

    . This project assessed the technical and economic feasibility of implementing geothermally coupled well-based CAES for grid-scale energy storage. Based on an evaluation of design specifications for a range of casing grades common in U.S. oil and gas fields, a 5-MW CAES project could be supported by twenty to twenty-five 5,000-foot, 7-inch wells using lower-grade casing, and as few as eight such wells for higher-end casing grades. Using this information, along with data on geothermal resources, well density, and potential future markets for energy storage systems, The Geysers geothermal field was selected to parameterize a case study to evaluate the potential match between the proven geothermal resource present at The Geysers and the field’s existing well infrastructure. Based on calculated wellbore compressed air mass, the study shows that a single average geothermal production well could provide enough geothermal energy to support a 15.4-MW (gross) power generation facility using 34 to 35 geothermal wells repurposed for compressed air storage, resulting in a simplified levelized cost of electricity (sLCOE) estimated at 11.2 ¢/kWh (Table S.1). Accounting for the power loss to the geothermal power project associated with diverting geothermal resources for air heating results in a net 2-MW decrease in generation capacity, increasing the CAES project’s sLCOE by 1.8 ¢/kWh.

  2. Geothermally Coupled Well-Based Compressed Air Energy Storage

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, C L [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bearden, Mark D [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Horner, Jacob A [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Appriou, Delphine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGrail, B Peter [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-12-01

    . This project assessed the technical and economic feasibility of implementing geothermally coupled well-based CAES for grid-scale energy storage. Based on an evaluation of design specifications for a range of casing grades common in U.S. oil and gas fields, a 5-MW CAES project could be supported by twenty to twenty-five 5,000-foot, 7-inch wells using lower-grade casing, and as few as eight such wells for higher-end casing grades. Using this information, along with data on geothermal resources, well density, and potential future markets for energy storage systems, The Geysers geothermal field was selected to parameterize a case study to evaluate the potential match between the proven geothermal resource present at The Geysers and the field’s existing well infrastructure. Based on calculated wellbore compressed air mass, the study shows that a single average geothermal production well could provide enough geothermal energy to support a 15.4-MW (gross) power generation facility using 34 to 35 geothermal wells repurposed for compressed air storage, resulting in a simplified levelized cost of electricity (sLCOE) estimated at 11.2 ¢/kWh (Table S.1). Accounting for the power loss to the geothermal power project associated with diverting geothermal resources for air heating results in a net 2-MW decrease in generation capacity, increasing the CAES project’s sLCOE by 1.8 ¢/kWh.

  3. Sila kojom vazduh pritiska pokretnu ploču/Force of the air pressure on a moving plate

    Directory of Open Access Journals (Sweden)

    Leonid Ivanovich Gretchihin

    2014-10-01

    Full Text Available U radu je razrađena matematički model gasodinamičkog opstrujavanja ravne ploče pri njenom kretanju sa pozitivnim i negativnim napadnim uglom. Pokazano je da pri malim brzinama kretanja, silu uzgona i čeoni otpor određuje gasodinamički tok vazduha u izlaznoj oblasti opstrujavanja, a pri brzinama kretanja koje su bliske brzini zvuka odlučujuću ulogu vrši uzajamno udarno dejstvo ploče sa molekulima okružujuće sredine u ulaznoj oblasti opstrujavanja. Otcepljena struja iza ploče se ne pojavljuje pri malim brzinama kretanja. Određeni su uslovi kada čeoni otpor i sila uzgona ploče menjaju znak. / (ruski Razrabotana matematičeskaja model' gazodinamičeskogo obtekanija ploskoj plastiny pri ee dviženii s položitel'nym i otricatel'nym uglom ataki. Pokazano, čto pri malyh skorostjah dviženija plastiny pod''emnaja sila i lobovoe soprotivlenie opredeljajutsja gazodinamikoj tečenija vozduha v tyl'noj oblasti, a pri skorostjah dviženija blizkih k skorosti zvuka rešajuščuju rol' vypolnjaet udarnoe vzaimodejstvie plastiny s molekulami okružajuščej sredy v perednej oblasti. Sryvnoe tečenie za plastinoj pri malyh skorostjah dviženija ne voznikaet. Opredeleny uslovija, kogda lobovoe soprotivlenie i pod''emnaja sila plastiny izmenjaet znak. / This paper developed a mathematical model of gas dynamic fluid flow for a flat plate during its movement with positive and negative angles of attack. It is shown that at low velocities, the lifting force and the frontal resistance are determined by gasdynamic air flow in the fluid flow exit areawhile at velocities close to the speed of sound the decisive role is played by a mutualeffect of the pplate coliding with molecules of the surrounding environment in the fluid flow incidence field. The airflow behind the plate does not appear at low velocities. The conditions when the frontal resistance and the lifting force change the sign are determined.

  4. Interrogation of Single Synthetic Polymer Chains and Polysaccharides by AFM-Based Force Spectroscopy

    NARCIS (Netherlands)

    Giannotti, Marina I.; Vancso, G. Julius

    2007-01-01

    This contribution reviews selected mechanical experiments on individual flexible macromolecules using single-molecule force spectroscopy (SMFS) based on atomic force microscopy. Focus is placed on the analysis of elasticity and conformational changes in single polymer chains upon variation of the ex

  5. Local and Regional Interactions Between Air Quality and Climate in New Delhi -- a Sector Based Analysis

    Science.gov (United States)

    Marrapu, P.; Cheng, Y.; Carmichael, G. R.; Beig, G.; Spak, S.; Lin, M.; Decker, M.; Schultz, M. G.; Winiwarter, W.

    2011-12-01

    Out of the 26 mega-cities in the world, 13 of them are affected by atmospheric brown clouds with high aerosol loadings and 5 of them are in South Asia. New Delhi (India) is one of the world's most polluted megacities. In this study we evaluate the air pollution levels in Delhi and their impacts on weather and climate. The two way interactions between pollution and meteorology are evaluated using the WRF-Chem model. The analysis period is focused on October 2010, the time period of the Commonwealth Games. The model is compared to BC and PM2.5 measurements at 11 sites. A sector based analysis is performed to assess the contributions to pollution and direct radiative forcing from transport, residential, power and industrial emissions. The contributions from emissions outside of Delhi are also evaluated to see the extent that regional emissions need to be controlled to meet air quality targets in Delhi. Results of simulations for emission scenarios generated by the GAINS model that address air quality and climate strategies are also discussed

  6. A basic condition-based maintenance strategy for air-cooled turbine generators

    Energy Technology Data Exchange (ETDEWEB)

    Laird, T; Griffith, G [Mechanical Dynamics and Analysis LLC, Generator Repair Services, Sunset Hills, MO (United States); Hoof, M. [Univ. of Applied Sciences, High Voltage and Power Systems Lab, Kaiserslautern (Germany)

    2005-07-01

    Generator components require regular maintenance to prevent failures. It is important to detect degradation of critical generator components such as stator windings, stator core, rotor windings, rotor retaining rings, generator bearings and high voltage bushings which are all exposed to high stresses. The methods of using condition-based maintenance (CBM) for turbine generators was discussed with particular focus on the maintenance strategy for air-cooled generators. Higher unit rated air-cooled machines typically designed as hydrogen-cooled machines are being used more frequently by the power industry to reduce costs. Since more compact machines are being built to reduce material costs, thermal and electrical design stresses have increased, resulting in higher utilization of the machines and reduced long-term reliability in service. It was noted that CBM will not completely eliminate all forced outage situations, but will greatly reduce their occurrence and will help avoid catastrophic machine situations. This paper outlined basic maintenance strategies for nuclear power plants, major utilities including fossil-fuel power plants, and minor utilities including industrial power plant producers. The economic strategy for air-cooled turbine generators was outlined with reference to unit condition assessment, trending assessed condition of major generator components, and unknown component weaknesses. The CBM maintenance can be applied to all types of power producers that can benefit from an improved, low cost maintenance strategy. Detailed knowledge of the unit design, operational weakness, cost of maintenance and operational capabilities is needed in order to conduct a reliable assessment. 19 refs., 2 figs.

  7. Carbon fibre tips for scanning probe microscopy based on quartz tuning fork force sensors

    Energy Technology Data Exchange (ETDEWEB)

    Castellanos-Gomez, A; Agrait, N; Rubio-Bollinger, G, E-mail: gabino.rubio@uam.es [Departamento de Fisica de la Materia Condensada (C-III), Universidad Autonoma de Madrid, Campus de Cantoblanco, 28049 Madrid (Spain)

    2010-04-09

    We report the fabrication and the characterization of carbon fibre tips for use in combined scanning tunnelling and force microscopy based on piezoelectric quartz tuning fork force sensors. We find that the use of carbon fibre tips results in a minimum impact on the dynamics of quartz tuning fork force sensors, yielding a high quality factor and, consequently, a high force gradient sensitivity. This high force sensitivity, in combination with high electrical conductivity and oxidation resistance of carbon fibre tips, make them very convenient for combined and simultaneous scanning tunnelling microscopy and atomic force microscopy measurements. Interestingly, these tips are quite robust against occasionally occurring tip crashes. An electrochemical fabrication procedure to etch the tips is presented that produces a sub-100-nm apex radius in a reproducible way which can yield high resolution images.

  8. High intensity interior aircraft noise increases the risk of high diastolic blood pressure in Indonesian Air Force pilots

    Directory of Open Access Journals (Sweden)

    Minarma Siagian

    2009-12-01

    Full Text Available Aim: To analyze the effects of aircraft noise, resting pulse rate, and other factors on the risk of high diastolic blood pressure (DBP in Indonesian Air Force pilots.Methods: A nested case-control study was conducted using data extracted from annual medical check-ups indoctrination aerophysiologic training records at the Saryanto Aviation and Aerospace Health Institute (LAKESPRA in Jakarta from January 2003 – September 2008. For analysis of DBP: the case group with DBP ≥ 90 mmHg were compared with contral group with DBP < 79 mmHG. One case matched to 12 controls.Results: Out of 567 pilots, 544 (95.9% had complete medical records. For this analysis there were 40 cases of high DBP and 480 controls for DBP. Pilots exposed to aircraft noise 90-95 dB rather than 70-80 dB had a 2.7-fold increase for high DBP [adjusted odds ratio (ORa = 2.70; 95% confi dence interval (CI = 1.05-6.97]. Pilots with resting pulse rates of ≥ 81/minute rather than ≤ 80/minute had a 2.7-fold increase for high DBP (ORa = 2.66; 95% CI = 1.26-5.61. In terms of total fl ight hours, pilots who had 1401-11125 hours rather than 147-1400 hours had a 3.2-fold increase for high DBP (ORa = 3.18; 95% CI = 1.01-10.03.Conclusion: High interior aircraft noise, high total flight hours,  and high resting pulse rate, increased risk for high DBP. Self assessment of resting pulse rate can be used to control the risk of high DBP. (Med J Indones 2009; 276: 276-82Keywords: diastolic blood pressure, aircraft noise, resting pulse rate, military pilots

  9. Assessment of the forced air-cooling performance for cylindrical lithium-ion battery packs: A comparative analysis between aligned and staggered cell arrangements

    International Nuclear Information System (INIS)

    An appropriate cell arrangement plays significant role to design a highly efficient cooling system for the lithium-ion battery pack. This paper performs a comparative analysis of thermal performances on different arrangements of cylindrical cells for a LiFePO4 battery pack. A thermal model for the battery pack is developed and is solved in couple with the governing equations of fluid flow in the numerical simulations. The experiments for model validation are conducted on a single cell of the battery pack with forced-air cooling system. The effects of longitudinal and transverse spacing on the cooling performances are analyzed for the battery pack with the aligned and the staggered arrays. Under a specified flow rate of cooling air, the maximum temperature rise is proportional to the longitudinal interval for the staggered arrays, while it is in inverse for the aligned arrangement. Increasing the transverse interval leads to the increase of the battery temperature rise for both aligned and staggered arrangements. By trade-off the design requirements (maximum temperature rise, temperature uniformity, power requirement and cooling index), an appropriate solution in term of the optimal combination of the longitudinal interval, transverse interval, and air inlet width is obtained for the aligned arrangement. - Highlights: • Forced air-cooling performance for cylindrical lithium-ion battery is evaluated. • Thermal performances for aligned and staggered cell arrangements are compared. • Geometric optimization is investigated for the battery air-cooling system

  10. Ensemble simulation of land evapotranspiration in China based on a multi-forcing and multi-model approach

    Science.gov (United States)

    Liu, Jianguo; Jia, Binghao; Xie, Zhenghui; Shi, Chunxiang

    2016-06-01

    In order to reduce the uncertainty of offline land surface model (LSM) simulations of land evapotranspiration (ET), we used ensemble simulations based on three meteorological forcing datasets [Princeton, ITPCAS (Institute of Tibetan Plateau Research, Chinese Academy of Sciences), Qian] and four LSMs (BATS, VIC, CLM3.0 and CLM3.5), to explore the trends and spatiotemporal characteristics of ET, as well as the spatiotemporal pattern of ET in response to climate factors over mainland China during 1982-2007. The results showed that various simulations of each member and their arithmetic mean (Ens Mean) could capture the spatial distribution and seasonal pattern of ET sufficiently well, where they exhibited more significant spatial and seasonal variation in the ET compared with observation-based ET estimates (Obs MTE). For the mean annual ET, we found that the BATS forced by Princeton forcing overestimated the annual mean ET compared with Obs MTE for most of the basins in China, whereas the VIC forced by Princeton forcing showed underestimations. By contrast, the Ens Mean was closer to Obs MTE, although the results were underestimated over Southeast China. Furthermore, both the Obs MTE and Ens Mean exhibited a significant increasing trend during 1982-98; whereas after 1998, when the last big EI Ni˜no event occurred, the Ens Mean tended to decrease significantly between 1999 and 2007, although the change was not significant for Obs MTE. Changes in air temperature and shortwave radiation played key roles in the long-term variation in ET over the humid area of China, but precipitation mainly controlled the long-term variation in ET in arid and semi-arid areas of China.

  11. Hybrid Force Control Based on ICMAC for an Astronaut Rehabilitative Training Robot

    Directory of Open Access Journals (Sweden)

    Lixun Zhang

    2012-08-01

    Full Text Available A novel Astronaut Rehabilitative Training Robot (ART based on a cable‐driven mechanism is represented in this paper. ART, a typical passive force servo system, can help astronauts to bench press in a microgravity environment. The purpose of this paper is to design controllers to eliminate the surplus force caused by an astronaut’s active movements. Based on the dynamics modelling of the cable‐driven unit, a hybrid force controller based on improved credit assignment CMAC (ICMAC is presented. A planning method for the cable tension is proposed so that the dynamic load produced by the ART can realistically simulate the gravity and inertial force of the barbell in a gravity environment. Finally, MATLAB simulation results of the man‐machine cooperation system are provided in order to verify the effectiveness of the proposed control strategy. The simulation results show that the hybrid control method based on the structure invariance principle can inhibit the surplus force and that ICMAC can improve the dynamic performance of the passive force servo system. Furthermore, the hybrid force controller based on ICMAC can ensure the stability of the system.

  12. NASA GLENN RESEARCH CENTER'S AIR POWER 2003 TEAM POSE WITH ORVILLE AND WILBUR WRIGHT NEAR THEIR

    Science.gov (United States)

    2003-01-01

    NASA GLENN RESEARCH CENTER'S AIR POWER 2003 TEAM POSE WITH ORVILLE AND WILBUR WRIGHT NEAR THEIR WONDERFUL FLYING MACHINES AT WRIGHT PATTERSON AIR FORCE BASE OPEN HOUSE - AIR POWER 2003, MAY 10-11, 2003

  13. Fabrication of metal oxide nanostructures based on Atomic Force Microscopy lithography

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Atomic Force Microscopy (AFM) mechanical lithography is a simple but significant method for nanofabrication. In this work, we used this method to construct nanos- tructures on Pt/Cu bilayer metal electrodes under ambient conditions in air. The influence of various scratch parameters, such as the applied force, scan velocity and circle times, on the lithography patterns was investigated. The Pt-Cu-CuxO-Cu-Pt nanostructure was constructed by choosing suitable scratch parameters and oxidation at room temperature. The properties of the scratched regions were also investigated by friction force microscopy and conductive AFM (C-AFM). The I-V curves show symmetric and linear properties, and Ohmic contacts were formed. These results indicate that AFM mechanical lithography is a powerful tool for fabricating novel metal-semiconductor nanoelectronic devices.

  14. Social Security, Cash Payments and Awards to Servicemen of the Red Army Air Force in the Great Patriotic War of 1941–1945

    Directory of Open Access Journals (Sweden)

    Alexander P. Abramov

    2016-07-01

    Full Text Available On the basis of the historical and sociological material presented materials about the Soviet state measures during the Great Patriotic War for the implementation of social policy in respect of the military air force of the Red Army, expressed in monetary incentives, rewards and social guarantees. The author notes that the implementation of social management practices at each stage of warfare timely adjustments depending on acquired combat experience and the strategic objectives of war. Existing wartime monetary awards system and social guarantees in respect of the personnel of the Red Army Air Force was not a major, but significant moral incentive for both pilots, as for representatives of other arms and services.

  15. Statistical Short-Range Guidance for Peak Wind Forecasts on Kennedy Space Center/Cape Canaveral Air Force Station, Phase III

    Science.gov (United States)

    Crawford, Winifred

    2010-01-01

    This final report describes the development of a peak wind forecast tool to assist forecasters in determining the probability of violating launch commit criteria (LCC) at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The peak winds are an important forecast element for both the Space Shuttle and Expendable Launch Vehicle (ELV) programs. The LCC define specific peak wind thresholds for each launch operation that cannot be exceeded in order to ensure the safety of the vehicle. The 45th Weather Squadron (45 WS) has found that peak winds are a challenging parameter to forecast, particularly in the cool season months of October through April. Based on the importance of forecasting peak winds, the 45 WS tasked the Applied Meteorology Unit (AMU) to develop a short-range peak-wind forecast tool to assist in forecasting LCC violations.The tool includes climatologies of the 5-minute mean and peak winds by month, hour, and direction, and probability distributions of the peak winds as a function of the 5-minute mean wind speeds.

  16. Peak Wind Forecasts for the Launch-Critical Wind Towers on Kennedy Space Center/Cape Canaveral Air Force Station, Phase IV

    Science.gov (United States)

    Crawford, Winifred

    2011-01-01

    This final report describes the development of a peak wind forecast tool to assist forecasters in determining the probability of violating launch commit criteria (LCC) at Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS). The peak winds arc an important forecast clement for both the Space Shuttle and Expendable Launch Vehicle (ELV) programs. The LCC define specific peak wind thresholds for each launch operation that cannot be exceeded in order to ensure the safety of the vehicle. The 45th Weather Squadron (45 WS) has found that peak winds are a challenging parameter to forecast, particularly in the cool season months of October through April. Based on the importance of forecasting peak winds, the 45 WS tasked the Applied Meteorology Unit (AMU) to update the statistics in the current peak-wind forecast tool to assist in forecasting LCC violations. The tool includes onshore and offshore flow climatologies of the 5-minute mean and peak winds and probability distributions of the peak winds as a function of the 5-minute mean wind speeds.

  17. Exploring the complex mechanical properties of xanthan scaffolds by AFM-based force spectroscopy

    OpenAIRE

    Hao Liang; Guanghong Zeng; Yinli Li; Shuai Zhang; Huiling Zhao; Lijun Guo; Bo Liu; Mingdong Dong

    2014-01-01

    The polysaccharide xanthan has been extensively studied owing to its potential application in tissue engineering. In this paper, xanthan scaffold structures were investigated by atomic force microscope (AFM) in liquid, and the mechanical properties of the complex xanthan structures were investigated by using AFM-based force spectroscopy (FS). In this work, three types of structures in the xanthan scaffold were identified based on three types of FS stretching events. The fact that the complex ...

  18. Exploring the complex mechanical properties of xanthan scaffolds by AFM-based force spectroscopy

    Directory of Open Access Journals (Sweden)

    Hao Liang

    2014-03-01

    Full Text Available The polysaccharide xanthan has been extensively studied owing to its potential application in tissue engineering. In this paper, xanthan scaffold structures were investigated by atomic force microscope (AFM in liquid, and the mechanical properties of the complex xanthan structures were investigated by using AFM-based force spectroscopy (FS. In this work, three types of structures in the xanthan scaffold were identified based on three types of FS stretching events. The fact that the complex force responses are the combinations of different types of stretching events suggests complicated intermolecular interactions among xanthan fibrils. The results provide crucial information to understand the structures and mechanical properties of the xanthan scaffold.

  19. Materiel Command and the Materiality of Commands: An Historical Examination of the US Air Force, Control Data Corporation, and the Advanced Logistics System

    OpenAIRE

    Yost, Jeffrey R.

    2010-01-01

    In the late 1960s the US Air Force Logistics Command (AFLC) engaged in an unparalleled, real-time computer networking project to manage all its logistics (location, inventory, maintenance, and transportation of personnel, aircraft, weapons, components, spare parts, etc.), the Advanced Logistics System (ALS). The $250 million ALS project was substantially larger in size and cost than earlier real-time computer networking projects (including SAGE programming and SABRE), but it has received virt...

  20. A passive decay heat removal system for LWRs based on air cooling

    Energy Technology Data Exchange (ETDEWEB)

    Mochizuki, Hiroyasu, E-mail: mochizki@u-fukui.ac.jp [Research Institute of Nuclear Engineering, University of Fukui, 1-2-4 Kanawa-cho, Tsuruga, Fukui 914-0055 (Japan); Yano, Takahiro [Graduate School of Engineering, University of Fukui, 1-2-4 Kanawa-cho, Tsuruga, Fukui 914-0055 (Japan)

    2015-05-15

    Highlights: • A passive decay heat removal system for LWRs is discussed. • An air cooler model which condenses steam is developed. • The decay heat can be removed by air coolers with forced convection. • The dimensions of the air cooler are proposed. - Abstract: The present paper describes the capability of an air cooling system (ACS) to remove decay heat from a core of LWR such as an advanced boiling water reactor (ABWR) and a pressurized water reactor (PWR). The motivation of the present research is the Fukushima severe accident (SA) on 11 March 2011. Since emergency cooling systems using electricity were not available due to station blackout (SBO) and malfunctions, many engineers might understand that water cooling was not completely reliable. Therefore, a passive decay heat removal (DHR) system would be proposed in order to prevent such an SA under the conditions of an SBO event. The plant behaviors during the SBO are calculated using the system code NETFLOW++ for the ABWR and PWR with the ACS. Two types of air coolers (ACs) are applied for the ABWR, i.e., a steam condensing air cooler (SCAC) of which intake for heat transfer tubes is provided in the steam region, and single-phase type of which intake is provided in the water region. The DHR characteristics are calculated under the conditions of the forced air circulation and also the natural air convection. As a result of the calculations, the decay heat can be removed safely by the reasonably sized ACS when heat transfer tubes are cooled with the forced air circulation. The heat removal rate per one finned heat transfer tube is evaluated as a function of air flow rate. The heat removal rate increases as a function of the air flow rate.

  1. Air pollution and stroke - an overview of the evidence base.

    Science.gov (United States)

    Maheswaran, Ravi

    2016-08-01

    Air pollution is being increasingly recognized as a significant risk factor for stroke. There are numerous sources of air pollution including industry, road transport and domestic use of biomass and solid fuels. Early reports of the association between air pollution and stroke come from studies investigating health effects of severe pollution episodes. Several daily time series and case-crossover studies have reported associations with stroke. There is also evidence linking chronic air pollution exposure with stroke and with reduced survival after stroke. A conceptual framework linking air pollution exposure and stroke is proposed. It links acute and chronic exposure to air pollution with pathways to acute and chronic effects on stroke risk. Current evidence regarding potential mechanisms mainly relate to particulate air pollution. Whilst further evidence would be useful, there is already sufficient evidence to support consideration of reduction in air pollution as a preventative measure to reduce the stroke burden globally.

  2. A new circulation type classification based upon Lagrangian air trajectories

    Directory of Open Access Journals (Sweden)

    Alexandre M. Ramos

    2014-10-01

    Full Text Available A new classification method of the large-scale circulation characteristic for a specific target area (NW Iberian Peninsula is presented, based on the analysis of 90-h backward trajectories arriving in this area calculated with the 3-D Lagrangian particle dispersion model FLEXPART. A cluster analysis is applied to separate the backward trajectories in up to five representative air streams for each day. Specific measures are then used to characterise the distinct air streams (e.g., curvature of the trajectories, cyclonic or anticyclonic flow, moisture evolution, origin and length of the trajectories. The robustness of the presented method is demonstrated in comparison with the Eulerian Lamb weather type classification.A case study of the 2003 heatwave is discussed in terms of the new Lagrangian circulation and the Lamb weather type classifications. It is shown that the new classification method adds valuable information about the pertinent meteorological conditions, which are missing in an Eulerian approach. The new method is climatologically evaluated for the five-year time period from December 1999 to November 2004. The ability of the method to capture the inter-seasonal circulation variability in the target region is shown. Furthermore, the multi-dimensional character of the classification is shortly discussed, in particular with respect to inter-seasonal differences. Finally, the relationship between the new Lagrangian classification and the precipitation in the target area is studied.

  3. Radiation contamination air monitoring basing on NATO normalization documents

    International Nuclear Information System (INIS)

    The conditions and actions connected with conducting of the air radiation monitoring have been described in the article. The staff and tasks of special military troops for air sampling as well as commonly used methods for air sampling have been presented and discussed

  4. Ecoflex: Improving air quality with green dynamic traffic management based on real time air quality measurements

    NARCIS (Netherlands)

    Baalen, J. van; Koning, A. de; Voogt, M.; Stelwagen, U.; Turksma, S.

    2011-01-01

    Across the world, air quality regulations are breached due to localized high pollution episodes in specific locations, or "hotspots". Advances in air pollution monitoring techniques enable hotspots to be identified more effectively; however challenges remain as to how best to reduce the incidence an

  5. Experimental synergy combining lidar measurements so as to optically characterize aerosols: applications to air quality and radiative forcing

    International Nuclear Information System (INIS)

    The work carried out in this study is devoted to a better understanding of the evolution of aerosol physical, chemical and optical properties for urban pollution aerosols, dust and biomass burning particles. It mainly concerns the complex refractive index and the single-scattering albedo. Such a characterisation is indeed necessary so as to fulfil the requirements of scientific and societal air quality and global climate evolution questions. Our study is based on a synergy between different measurements platforms: ground-based or airborne measurements, together with active and passive remote sensing observations. Lidar in particular turns out to be an essential tool in order to assess horizontal and vertical variability of aerosol micro-physical and optical properties in the atmospheric boundary layer, but also in the residual layer, as well as in layers transported from the boundary layer to the free troposphere. The original methodology we developed highlights the importance of the geographical origin, the impact of aging and dynamical processes in the evolution of structural, optical and hygroscopic aerosol features. The related accurate determination of the properties in each aerosol layer is required for radiative fluxes and heating rates calculations in the atmospheric column. The radiative impact of both dust particles and biomass burning aerosols observed over the region of Niamey (Niger) was thus assessed during the dry season. These results reveal the need of a better characterisation of those significant aerosol properties for each layer in models. (author)

  6. Research on Cutting Force of Turn-Milling Based on Thin-Walled Blade

    Directory of Open Access Journals (Sweden)

    Lida Zhu

    2016-01-01

    Full Text Available Turn-milling is regarded as the milling of a curved surface while rotating the workpiece around its center point, which combines effectively the advantages of both turning and milling, wherein it allows for good metal removal with the difficult-to-cut thin-walled workpieces in aviation. The objective of the present work is to study cutting force by turn-milling in cutting condition. Aiming at the deformation properties of thin-walled blade, the predicted models of rigid cutting force and flexible cutting force with ball cutter are provided, respectively, in turn-milling process. The deformation values of blade and cutter are calculated, respectively, based on the engaged trajectory by using the iterative algorithm. The rigid and flexible cutting forces are compared and the influence degrees of cutting parameters on cutting forces are analyzed. These conclusions provide theoretical foundation and reference for turn-milling mechanism research.

  7. Dehumidifying Air for Cooling & Refrigeration: Nanotechnology Membrane-based Dehumidifier

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-10-01

    Broad Funding Opportunity Announcement Project: Dais is developing a product called NanoAir which dehumidifies the air entering a building to make air conditioning more energy efficient. The system uses a polymer membrane that allows moisture but not air to pass through it. A vacuum behind the membrane pulls water vapor from the air, and a second set of membranes releases the water vapor outside. The membrane’s high selectivity translates into reduced energy consumption for dehumidification. Dais’ design goals for NanoAir are the use of proprietary materials and processes and industry-standard installation techniques. NanoAir is also complementary to many other energy saving strategies, including energy recovery.

  8. FORCE FEEDBACK MODEL OF ELECTRO-HYDRAULIC SERVO TELE-OPERATION ROBOT BASED ON VELOCITY CONTROL

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The tele-operation robotic system which consists of an excavator as the construction robot, and two joysticks for operating the robot from a safe place are useful for performing restoration in damaged areas. In order to accomplish a precise task, the operator needs to feel a realistic sense of task force brought about from a feedback force between the fork glove of slave robot and unfamiliar environment. A novel force feedback model is proposed based on velocity control of cylinder to determine environment force acting" on fork glove. Namely, the feedback force is formed by the error of displacement of joystick with velocity and driving force of piston, and the gain is calculated by the driving force and threshold of driving force of hydraulic cylinder. Moreover, the variable gain improved algorithm is developed to overcome the defect for grasping soft object. Experimental results for fork glove freedom of robotic system are provided to demonstrate the developed algorithm is available for grasping soft object.

  9. Design and Synthesis of Distillation Systems using a Driving Force Based Approach

    DEFF Research Database (Denmark)

    Bek-Pedersen, Erik; Gani, Rafiqul

    2004-01-01

    A new integrated framework for synthesis, design and operation of distillation-based separation schemes is presented here. This framework is based on the driving force approach, which provides a measure of the differences in chemical/physical properties between two co-existing phases in a separat......A new integrated framework for synthesis, design and operation of distillation-based separation schemes is presented here. This framework is based on the driving force approach, which provides a measure of the differences in chemical/physical properties between two co-existing phases...

  10. Prestress Force Identification for Externally Prestressed Concrete Beam Based on Frequency Equation and Measured Frequencies

    Directory of Open Access Journals (Sweden)

    Luning Shi

    2014-01-01

    Full Text Available A prestress force identification method for externally prestressed concrete uniform beam based on the frequency equation and the measured frequencies is developed. For the purpose of the prestress force identification accuracy, we first look for the appropriate method to solve the free vibration equation of externally prestressed concrete beam and then combine the measured frequencies with frequency equation to identify the prestress force. To obtain the exact solution of the free vibration equation of multispan externally prestressed concrete beam, an analytical model of externally prestressed concrete beam is set up based on the Bernoulli-Euler beam theory and the function relation between prestress variation and vibration displacement is built. The multispan externally prestressed concrete beam is taken as the multiple single-span beams which must meet the bending moment and rotation angle boundary conditions, the free vibration equation is solved using sublevel simultaneous method and the semi-analytical solution of the free vibration equation which considered the influence of prestress on section rigidity and beam length is obtained. Taking simply supported concrete beam and two-span concrete beam with external tendons as examples, frequency function curves are obtained with the measured frequencies into it and the prestress force can be identified using the abscissa of the crosspoint of frequency functions. Identification value of the prestress force is in good agreement with the test results. The method can accurately identify prestress force of externally prestressed concrete beam and trace the trend of effective prestress force.

  11. Development of novel and sensitive sensors based on microcantilever of atomic force microscope

    Institute of Scientific and Technical Information of China (English)

    JIN Yan; WANG Kemin; JIN Rong

    2006-01-01

    Recently, the development of sensors based on microfabricated cantilevers of atomic force microscope (AFM) has attracted considerable attention from the designers of novel physical, chemical, and biological sensors. Many kinds of sensors have been developed taking the advantages of its high-resolution imaging, force measurement and force sensitivity, such as immunosensor and DNA biosensor and the sensors for detection of intermolecular interaction. This paper reviews the progress made in this field and discusses the signal transfer principles by which the design of the sensors is achieved.

  12. Force distribution in granular media studied by an energy method based on statistical mechanics

    CERN Document Server

    Galindo-Torres, S A

    2010-01-01

    In the present letter a method to find a proper expression for the force distribution inside a granular sample in static equilibrium is proposed. The method is based in statistical mechanics and the force distribution is obtained by studying how the potential elastic energy is divided among the different contacts between grains. It is found with DEM simulations with spheres that the elastic potential energy distribution follows a Bose Einstein law from which the force distribution is deduced. The present letter open a way in which granular materials can be studied with the tools provided by statistical mechanics.

  13. Matlab-based interface for the simultaneous acquisition of force measures and Doppler ultrasound muscular images.

    Science.gov (United States)

    Ferrer-Buedo, José; Martínez-Sober, Marcelino; Alakhdar-Mohmara, Yasser; Soria-Olivas, Emilio; Benítez-Martínez, Josep C; Martínez-Martínez, José M

    2013-04-01

    This paper tackles the design of a graphical user interface (GUI) based on Matlab (MathWorks Inc., MA), a worldwide standard in the processing of biosignals, which allows the acquisition of muscular force signals and images from a ultrasound scanner simultaneously. Thus, it is possible to unify two key magnitudes for analyzing the evolution of muscular injuries: the force exerted by the muscle and section/length of the muscle when such force is exerted. This paper describes the modules developed to finally show its applicability with a case study to analyze the functioning capacity of the shoulder rotator cuff. PMID:23176896

  14. Sliding mode-based lateral vehicle dynamics control using tyre force measurements

    Science.gov (United States)

    Kunnappillil Madhusudhanan, Anil; Corno, Matteo; Holweg, Edward

    2015-11-01

    In this work, a lateral vehicle dynamics control based on tyre force measurements is proposed. Most of the lateral vehicle dynamics control schemes are based on yaw rate whereas tyre forces are the most important variables in vehicle dynamics as tyres are the only contact points between the vehicle and road. In the proposed method, active front steering is employed to uniformly distribute the required lateral force among the front left and right tyres. The force distribution is quantified through the tyre utilisation coefficients. In order to address the nonlinearities and uncertainties of the vehicle model, a gain scheduling sliding-mode control technique is used. In addition to stabilising the lateral dynamics, the proposed controller is able to maintain maximum lateral acceleration. The proposed method is tested and validated on a multi-body vehicle simulator.

  15. Prediction of Three-Dimensional Milling Forces Based on Finite Element

    Directory of Open Access Journals (Sweden)

    Lida Zhu

    2014-01-01

    Full Text Available The model of milling force is mainly proposed to predict and analyze the cutting process based on finite element method in this paper. Firstly, milling finite element model is given based on orthogonal cutting principle, and then the influence laws of cutting parameters on chip formation are analyzed by using different simulation parameters. In addition, the three-dimensional milling forces are obtained from finite element models. Finally, the values of milling force by the milling experiment are also compared and analyzed with the simulation values to verify the feasibility and reasonability. It can be shown that milling forces match well between simulation and experiment results, which can provide many good basic data and analysis methods to optimize the machining parameters, reduce tool wear, and improve the workpiece surface roughness and adapt to the programming strategy of high speed machining.

  16. A New Designed Hot Tearing Apparatus which Based on the Applied Tensile Forces

    OpenAIRE

    Rong-Fu Xu; Hong-Liang Zheng; Feng-Xiang Guo; Su-Pei Ding; Xue-Lei Tian

    2013-01-01

    The objective of this study is to introduce a simple experimental apparatus based on the applied forces for quantitative assessment on hot tearing behavior in aluminum alloys. According to the experimental procedure, molten metal is cast in the rod-shaped mold cavity. One side of the casting specimen is hooked by a steel bolt which restrains its free contraction and transfers the tensile forces during solidification. A steel threaded rod connected to a load cell which records the real-time me...

  17. FUZZY MODELLING OF LIQUID DESICCANT BASED AIR DEHUMIDIFICATION SYSTEM

    OpenAIRE

    Harpreet Singh; Jagdev Singh; Simranpreet Singh Gill

    2011-01-01

    This paper describes the Mamdani fuzzy models of heat exchanger and dehumidifier (absorber) of an air dehumidification process occurring in a packed bed using liquid desiccant. Temperature of water used ascooling medium at the inlet of heat exchanger, temperature of desiccant solution(from the regenerator) ,inlet air humidity ratio of humid air, flow rate per unit cross-sectional area, temperature of desiccant solution(from the heat exchanger) have been taken as different variables for packed...

  18. The system of thermoelectric air conditioning based on permeable thermoelements

    OpenAIRE

    Cherkez R. G.

    2009-01-01

    There is thermoelectric air conditioner unit on the basis of permeable cooling thermoelements presented. In thermoelectric air conditioner unit the thermoelectric effects and the Joule–Thomson effect have been used for the air stream cooling. There have been described the method of temperature distribution analysis, the determinations of energy conversion power characteristics and design style of permeable thermoelement with maximum coefficient of performance described. The results of compute...

  19. Liquid-air based Fabry-Pérot cavity on fiber tip sensor.

    Science.gov (United States)

    Llera, Miguel; Aellen, Thierry; Hervas, Javier; Salvadé, Yves; Senn, Pascal; Le Floch, Sébastien; Keppner, Herbert

    2016-04-18

    This paper presents a Fabry-Perot fiber tip sensor based on an air-liquid filled cavity. The cavity is sealed off by a thin gold coated membrane of parylene C, between 300 and 350 nm, creating a particularly flexible diaphragm. In order to retrieve and track the cavity of interest from other cavities formed within the sensor tip, a signal processing of the feedback signal is performed by inverse fast Fourier transform. The experimental sensor has been manufactured and tested for temperature, giving cavity length sensitivities of 6.1 nm/°C and 9.6 nm/°C for temperature increase and decrease respectively. The external gas pressure response gives a sensitivity of 15 nm/kPa. The fiber sensor has also been adapted for force sensing after silicone embedment and has shown a sensitivity of about 8.7 nm/mN. Finally, the sensor has been tested on insertion into a human temporal bone, proving that it could be an interesting candidate for insertion force monitoring for robotic cochlear implantation. PMID:27137244

  20. Experimental study of frost heaving force based on transient shock response using piezoceramic sensors

    Science.gov (United States)

    Wang, Ruolin; Peng, Tongxiao; Wang, Ming L.

    2016-04-01

    In seasonally frozen soil regions, the frost heaving problem made it difficult to monitor or evaluate the pile safety for long term. So far, no mature tool can be utilized to monitor the frost heaving force, which was unevenly distributed along the pile. In this paper, a piezoceramic sensing based transient excitation response approach was proposed to monitor the frost heaving force in real time. Freeze-thaw cycles can result in great changes of soil engineering properties, including the frost heaving force. So, the freeze-thaw cycle was repeated fourth to study its effect. In the experiment, transient horizontal shock on the top of the pile will be detected by the 6 PZT sensors glued on the pile. The signal data received by the 6 PZT sensors can be used to illustrate the frost heaving force distribution along the pile. Moisture content effect is also one of the important reasons that cause the variation of soil mechanical properties. So three different moisture content (6%, 12%, 18%) testing soil were used in this experiment to detect the variance of the frost heaving force. An energy indicator was developed to quantitatively evaluate the frost heaving force applied on the pile. The experimental results showed that the proposed method was effective in monitoring the uneven distribution of frost heaving force along the pile.

  1. A Vision-Based Approach for Estimating Contact Forces: Applications to Robot-Assisted Surgery

    Directory of Open Access Journals (Sweden)

    C. W. Kennedy

    2005-01-01

    Full Text Available The primary goal of this paper is to provide force feedback to the user using vision-based techniques. The approach presented in this paper can be used to provide force feedback to the surgeon for robot-assisted procedures. As proof of concept, we have developed a linear elastic finite element model (FEM of a rubber membrane whereby the nodal displacements of the membrane points are measured using vision. These nodal displacements are the input into our finite element model. In the first experiment, we track the deformation of the membrane in real-time through stereovision and compare it with the actual deformation computed through forward kinematics of the robot arm. On the basis of accurate deformation estimation through vision, we test the physical model of a membrane developed through finite element techniques. The FEM model accurately reflects the interaction forces on the user console when the interaction forces of the robot arm with the membrane are compared with those experienced by the surgeon on the console through the force feedback device. In the second experiment, the PHANToM haptic interface device is used to control the Mitsubishi PA-10 robot arm and interact with the membrane in real-time. Image data obtained through vision of the deformation of the membrane is used as the displacement input for the FEM model to compute the local interaction forces which are then displayed on the user console for providing force feedback and hence closing the loop.

  2. The US Air Force medical service system%美国空军的医疗保障体系

    Institute of Scientific and Technical Information of China (English)

    余志斌

    2016-01-01

    借鉴与学习美国空军医疗保障体系与先进理念,以及稳定航空军医队伍的有效手段.主要引用美国空军两个网络资料,文献4篇,军标1个.这些资料表明,美国空军高层已形成共识——良好的医疗服务是飞行安全与战斗力的重要保障.因此,每年预算庞大的经费,以维持75个医疗中心、医院、诊所或医疗站的专一而高效地运转.而军事人员通用医疗保险制度(TRICARE)使三军人员就近就诊,大幅节省费用.全球搜救、空运医疗服务系统和分级健康维护与治疗,构成完备的医疗保障体系.航空军医则是保障空军全体官兵健康的重要前哨,通过分级培训与较高待遇,使航空军医在专业与生活水平两方面均能不断提升,有效地稳定了这支队伍.美国TRICARE制度可以借鉴,稳定航空军医队伍的手段值得学习.%To analyze the United State Air Force (USAF) medical service system in order to obtain core concepts and methods to maintain high level and active flight surgeon team. Data from 4 articles, 1 military standard and 2 websites were cited. The data indicated that the USAF leadership had a consensus: good medical service was an important guarantee for flight safety and fighting capacity. Therefore, the 75 medical centers, hospitals, clinics or stations were maintained by a huge annual budget of funds. TRICARE medical insurance program provided the military personnel with the nearest medication to save substantial cost. Global search and rescue, aeromedical evacuation and grading healthcare constitute a comprehensive medical insurance system. The flight surgeon was as an outpost for healthcare of all the officers and airmen. The higher annual salary and grading professional training can effectively stabilize and improve the flight surgeon team. The medical insurance program serving uniformed military members should be followed as an example. The means of maintaining flight surgeon team was worth

  3. Testing a Non-Competency Inservice Education Model Based on Humanistic or Third Force Psychology

    Science.gov (United States)

    Beck, William

    1978-01-01

    The investigation of the impact of the "growth" approach, based on humanistic or Third Force psychology, involved developing a "growth" model based on humanistic psychology, pilot "testing" the model, and drawing implications regarding the model's potential for inservice education. The data indicated that the "growth" approach to inservice…

  4. Development of a quartz tuning-fork-based force sensor for measurements in the tens of nanoNewton force range during nanomanipulation experiments

    Energy Technology Data Exchange (ETDEWEB)

    Oiko, V. T. A., E-mail: oiko@ifi.unicamp.br; Rodrigues, V.; Ugarte, D. [Instituto de Física “Gleb Wataghin,” Univ. Estadual de Campinas (UNICAMP), Campinas 13083-859 (Brazil); Martins, B. V. C. [Department of Physics, University of Alberta, Edmonton, Alberta T6G 2R3 (Canada); Silva, P. C. [Laboratório Nacional de Nanotecnologia, CNPEM, Campinas 13083-970 (Brazil)

    2014-03-15

    Understanding the mechanical properties of nanoscale systems requires new experimental and theoretical tools. In particular, force sensors compatible with nanomechanical testing experiments and with sensitivity in the nN range are required. Here, we report the development and testing of a tuning-fork-based force sensor for in situ nanomanipulation experiments inside a scanning electron microscope. The sensor uses a very simple design for the electronics and it allows the direct and quantitative force measurement in the 1–100 nN force range. The sensor response is initially calibrated against a nN range force standard, as, for example, a calibrated Atomic Force Microscopy cantilever; subsequently, applied force values can be directly derived using only the electric signals generated by the tuning fork. Using a homemade nanomanipulator, the quantitative force sensor has been used to analyze the mechanical deformation of multi-walled carbon nanotube bundles, where we analyzed forces in the 5–40 nN range, measured with an error bar of a few nN.

  5. Characterisation of tissue factor-bearing extracellular vesicles with AFM: comparison of air-tapping-mode AFM and liquid Peak Force AFM

    Directory of Open Access Journals (Sweden)

    Julie Hardij

    2013-08-01

    Full Text Available Introduction: Extracellular vesicles (EVs are shed from cells and carry markers of the parent cells. Vesicles derived from cancer cells reach the bloodstream and locally influence important physiological processes. It has been previously shown that procoagulant vesicles are circulating in patients’ fluids. These EVs are therefore considered as promising biomarkers for the thrombotic risk. Because of their small size, classical methods such as flow cytometry suffer from limitation for their characterisation. Atomic force microscopy (AFM has been proposed as a promising complementary method for the characterisation of EVs. Objectives: The objectives of this study are: (a to develop and validate AFM with specific antibodies (anti-TF and (b to compare air and liquid modes for EVs’ size and number determination as potential biomarkers of the prothrombotic risk. Methods: AFM multimode nanoscope III was used for air tapping mode (TM. AFM catalyst was used for liquid Peak Force Tapping (PFT mode. Vesicles are generated according to Davila et al.'s protocol. Substrates are coated with various concentrations of antibodies, thanks to ethanolamine and glutaraldehyde. Results: Vesicles were immobilised on antibody-coated surfaces to select tissue factor (TF-positive vesicles. The size range of vesicles observed in liquid PFT mode is 6–10 times higher than in air mode. This corresponds to the data found in the literature. Conclusion: We recommend liquid PFT mode to analyse vesicles on 5 µg/ml antibody-coated substrates.

  6. Comparison of an EMG-based and a stress-based method to predict shoulder muscle forces.

    Science.gov (United States)

    Engelhardt, Christoph; Malfroy Camine, Valérie; Ingram, David; Müllhaupt, Philippe; Farron, Alain; Pioletti, Dominique; Terrier, Alexandre

    2015-01-01

    The estimation of muscle forces in musculoskeletal shoulder models is still controversial. Two different methods are widely used to solve the indeterminacy of the system: electromyography (EMG)-based methods and stress-based methods. The goal of this work was to evaluate the influence of these two methods on the prediction of muscle forces, glenohumeral load and joint stability after total shoulder arthroplasty. An EMG-based and a stress-based method were implemented into the same musculoskeletal shoulder model. The model replicated the glenohumeral joint after total shoulder arthroplasty. It contained the scapula, the humerus, the joint prosthesis, the rotator cuff muscles supraspinatus, subscapularis and infraspinatus and the middle, anterior and posterior deltoid muscles. A movement of abduction was simulated in the plane of the scapula. The EMG-based method replicated muscular activity of experimentally measured EMG. The stress-based method minimised a cost function based on muscle stresses. We compared muscle forces, joint reaction force, articular contact pressure and translation of the humeral head. The stress-based method predicted a lower force of the rotator cuff muscles. This was partly counter-balanced by a higher force of the middle part of the deltoid muscle. As a consequence, the stress-based method predicted a lower joint load (16% reduced) and a higher superior-inferior translation of the humeral head (increased by 1.2 mm). The EMG-based method has the advantage of replicating the observed cocontraction of stabilising muscles of the rotator cuff. This method is, however, limited to available EMG measurements. The stress-based method has thus an advantage of flexibility, but may overestimate glenohumeral subluxation.

  7. Finite Element Method Based Modeling for Prediction of Cutting Forces in Micro-end Milling

    Science.gov (United States)

    Pratap, Tej; Patra, Karali

    2016-04-01

    Micro-end milling is one of the widely used processes for producing micro features/components in micro-fluidic systems, biomedical applications, aerospace applications, electronics and many more fields. However in these applications, the forces generated in the micro-end milling process can cause tool vibration, process instability and even cause tool breakage if not minimized. Therefore, an accurate prediction of cutting forces in micro-end milling is essential. In this work, a finite element method based model is developed using ABAQUS/Explicit 6.12 software for prediction of cutting forces in micro-end milling with due consideration of tool edge radius effect, thermo-mechanical properties and failure parameters of the workpiece material including friction behaviour at tool-chip interface. Experiments have been performed for manufacturing of microchannels on copper plate using 500 µm diameter tungsten carbide micro-end mill and cutting forces are acquired through a dynamometer. Predicted cutting forces in feed and cross feed directions are compared with experimental results and are found to be in good agreements. Results also show that FEM based simulations can be applied to analyze size effects of specific cutting forces in micro-end milling process.

  8. A New Designed Hot Tearing Apparatus which Based on the Applied Tensile Forces

    Directory of Open Access Journals (Sweden)

    Rong-Fu Xu

    2013-08-01

    Full Text Available The objective of this study is to introduce a simple experimental apparatus based on the applied forces for quantitative assessment on hot tearing behavior in aluminum alloys. According to the experimental procedure, molten metal is cast in the rod-shaped mold cavity. One side of the casting specimen is hooked by a steel bolt which restrains its free contraction and transfers the tensile forces during solidification. A steel threaded rod connected to a load cell which records the real-time measurement of the tensile forces during every experiment. Thermal history is monitored by K-type thermocouple. The data of the temperature and tensile forces are acquired by a data acquisition system. Test of the experimental apparatus is conducted with A356 and Al-5 wt% Cu alloy to investigate the accuracy of the experimental apparatus and modify its operating parameter. The tensile forces curves and the temperature curves of the specimens are obtained by experiment. This data provide useful information about hot tearing formation and solidification characteristics, from which their quantitative relations are derived. In this manner, the hot tearing behavior in aluminum alloys can be studied by this experimental apparatus based on the applied forces.

  9. A computed torque method based attitude control with optimal force distribution for articulated body mobile robots

    Energy Technology Data Exchange (ETDEWEB)

    Fukushima, Edwardo F.; Hirose, Shigeo [Tokyo Inst. of Tech. (Japan)

    2000-05-01

    This paper introduces an attitude control scheme based in optimal force distribution using quadratic programming which minimizes joint energy consumption. This method shares similarities with force distribution for multifingered hands, multiple coordinated manipulators and legged walking robots. In particular, an attitude control scheme was introduced inside the force distribution problem, and successfully implemented for control of the articulated body mobile robot KR-II. This is an actual mobile robot composed of cylindrical segments linked in series by prismatic joints and has a long snake-like appearance. These prismatic joints are force controlled so that each segment's vertical motion can automatically follow the terrain irregularities. An attitude control is necessary because this system acts like a system of wheeled inverted pendulum carts connected in series, being unstable by nature. The validity and effectiveness of the proposed method is verified by computer simulation and experiments with the robot KR-II. (author)

  10. Cadherin-Based Intercellular Adhesions Organize Epithelial Cell-Matrix Traction Forces

    CERN Document Server

    Mertz, Aaron F; Banerjee, Shiladitya; Goldstein, Jill; Rosowski, Kathryn R; Niessen, Carien M; Marchetti, M Cristina; Dufresne, Eric R; Horsley, Valerie

    2012-01-01

    Cell--cell and cell-matrix adhesions play essential roles in the function of tissues. There is growing evidence for the importance of crosstalk between these two adhesion types, yet little is known about the impact of these interactions on the mechanical coupling of cells to the extracellular-matrix (ECM). Here, we combine experiment and theory to reveal how intercellular adhesions modulate forces transmitted to the ECM. In the absence of cadherin-based adhesions, primary mouse keratinocytes within a colony appear to act independently, with significant traction forces extending throughout the colony. In contrast, with strong cadherin-based adhesions, keratinocytes in a cohesive colony localize traction forces to the colony periphery. Through genetic or antibody-mediated loss of cadherin expression or function, we show that cadherin-based adhesions are essential for this mechanical cooperativity. A minimal physical model in which cell--cell adhesions modulate the physical cohesion between contractile cells is ...

  11. A New Method of Desired Gait Synthesis for Biped Walking Robot Based on Ground Reaction Force

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new method of desired gait synthesis for biped walking robot based on the ground reaction force was proposed. The relation between the ground reaction force and joint motion is derived using the D'Almbert principle. In view of dynamic walking with high stability, the ZMP(Zero Moment Point)stability criterion must be considered in the desired gait synthesis. After that, the joint trajectories of biped walking robot are decided by substituting the ground reaction force into the aforesaid relation based on the ZMP criterion. The trajectory of desired ZMP is determined by a fuzzy logic based upon the body posture of biped walking robot. The proposed scheme is simulated and experimented on a 10 degree of freedom biped walking robot. The results indicate that the proposed method is feasible.

  12. Finite Element Based Stress Analysis of Seat Belt Using Integrated Force Method

    Directory of Open Access Journals (Sweden)

    Anjali Kale

    2014-06-01

    Full Text Available Integrated force method (IFM has been developed for solving various continuum mechanics problems, where all the internal forces are taken as independent variables. The system equilibrium equations (EE's are mathematically concatenated with the MATLAB based compatibility conditions (CC's to form the global set of equations. This paper explains the solution strategy of prototype seat-belt component using integrated force method. Actual seat belt component is taken here to verify IFM based FE element are readily used which is named as REC_5F_8D and REC_13F_16D where 5F and 13F reflects number of internal unknowns and 8D and 16D are number of total displacements respectively. The results for “Von Mises Stress” and Maximum Displacement using IFM based formulation and compared with ANSYS.

  13. Biomass burning emissions over northern Australia constrained by aerosol measurements: II—Model validation, and impacts on air quality and radiative forcing

    Science.gov (United States)

    Luhar, Ashok K.; Mitchell, Ross M.; (Mick) Meyer, C. P.; Qin, Yi; Campbell, Susan; Gras, John L.; Parry, David

    This two-part series investigates the emission and transport of biomass burning aerosol (or particulate matter) across the Top End of the Northern Territory of Australia. In Part I, Meyer et al. [2008. Biomass burning emissions over northern Australia constrained by aerosol measurements: I—Modelling the distribution of hourly emissions. Atmospheric Environment, in press, doi:10.1016/j.atmosenv.2007.10.089.] used a fuel load distribution coupled with a satellite-derived imagery of fire scars and hotspots and the diurnal variation of a fire danger index to estimate hourly emission rates of particulate matter with an aerodynamic diameter of 2.5 μm or less (PM 2.5) for the dry season April-November 2004 at a spatial resolution of 1 km×1 km. In the present paper, these emission rates are used in TAPM, a three-dimensional meteorological and air pollution model, and the modelled PM 2.5 concentrations and aerosol optical depths are compared with satellite and ground-based measurements. This exercise also seeks to fine-tune and validate the emission calculation methodology, a process through which it is found that cases with hotspots without any corresponding fire scars (e.g. in mountainous terrain), which were initially ignored, need to be included to improve the accuracy of model predictions. Overall, the model is able to describe the measurements satisfactorily, considering the issues associated with the model resolution, emission uncertainty, and modelled meteorology. The model hindcasts numerous exceedences of the advisory maximum PM 2.5 exposure limit across the study region, with large areas in excess of 30 exceedences during the study period. Estimated mean top of atmosphere direct radiative forcing due to aerosol shows a seasonal mean of -1.8 W m -2 with a region of strong enhancement over the western portion of the Top End.

  14. A radial distribution function-based open boundary force model for multi-centered molecules

    KAUST Repository

    Neumann, Philipp

    2014-06-01

    We derive an expression for radial distribution function (RDF)-based open boundary forcing for molecules with multiple interaction sites. Due to the high-dimensionality of the molecule configuration space and missing rotational invariance, a computationally cheap, 1D approximation of the arising integral expressions as in the single-centered case is not possible anymore. We propose a simple, yet accurate model invoking standard molecule- and site-based RDFs to approximate the respective integral equation. The new open boundary force model is validated for ethane in different scenarios and shows very good agreement with data from periodic simulations. © World Scientific Publishing Company.

  15. Multiparametric imaging of biological systems by force-distance curve-based AFM.

    Science.gov (United States)

    Dufrêne, Yves F; Martínez-Martín, David; Medalsy, Izhar; Alsteens, David; Müller, Daniel J

    2013-09-01

    A current challenge in the life sciences is to understand how biological systems change their structural, biophysical and chemical properties to adjust functionality. Addressing this issue has been severely hampered by the lack of methods capable of imaging biosystems at high resolution while simultaneously mapping their multiple properties. Recent developments in force-distance (FD) curve-based atomic force microscopy (AFM) now enable researchers to combine (sub)molecular imaging with quantitative mapping of physical, chemical and biological interactions. Here we discuss the principles and applications of advanced FD-based AFM tools for the quantitative multiparametric characterization of complex cellular and biomolecular systems under physiological conditions. PMID:23985731

  16. OPTIMAL DESIGN OF A 6-AXIS FORCE TRANSDUCER BASED ON STEWART PLATFORM RELATED TO SENSITIVITY ISOTROPY

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The design method of a 6-axis force robot's transducer based on the Stewart platform is detailed.For this purpose, the sensitivity isotropy evaluation criteria of the transducer are defined, and by the aid of computer, the relationships between the criteria and the parameters of all the transducers based on the Stewart platform are investigated within the geometric model of the solution space, which can provide the theoretical background for the optimal construction design of the 6-axis force transducer related to the sensitivity isotropy.

  17. High Precision Prediction of Rolling Force Based on Fuzzy and Nerve Method for Cold Tandem Mill

    Institute of Scientific and Technical Information of China (English)

    JIA Chun-yu; SHAN Xiu-ying; NIU Zhao-ping

    2008-01-01

    The rolling force model for cold tandem mill was put forward by using the Elman dynamic recursive network method, based on the actual measured data. Furthermore, a good assumption is put forward, which brings a full universe of discourse self-adjusting factor fuzzy control, closed-loop adjusting, based on error feedback and expertise into a rolling force prediction model, to modify prediction outputs and improve prediction precision and robustness. The simulated results indicate that the method is highly effective and the prediction precision is better than that of the traditional method. Predicted relative error is less than ±4%, so the prediction is high precise for the cold tandem mill.

  18. Prediction of adsorption of small molecules in porous materials based on ab initio force field method

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Computational prediction of adsorption of small molecules in porous materials has great impact on the basic and applied research in chemical engineering and material sciences. In this work,we report an approach based on grand canonical ensemble Monte Carlo(GCMC) simulations and ab initio force fields. We calculated the adsorption curves of ammonia in ZSM-5 zeolite and hydrogen in MOF-5(a metal-organic-framework material). The predictions agree well with experimental data. Because the predictions are based on the first principle force fields,this approach can be used for the adsorption prediction of new molecules or materials without experimental data as guidance.

  19. Multi-Level Wild Land Fire Fighting Management Support System for an Optimized Guidance of Ground and Air Forces

    Science.gov (United States)

    Almer, Alexander; Schnabel, Thomas; Perko, Roland; Raggam, Johann; Köfler, Armin; Feischl, Richard

    2016-04-01

    Climate change will lead to a dramatic increase in damage from forest fires in Europe by the end of this century. In the Mediterranean region, the average annual area affected by forest fires has quadrupled since the 1960s (WWF, 2012). The number of forest fires is also on the increase in Central and Northern Europe. The Austrian forest fire database shows a total of 584 fires for the period 2012 to 2014, while even large areas of Sweden were hit by forest fires in August 2014, which were brought under control only after two weeks of intense fire-fighting efforts supported by European civil protection modules. Based on these facts, the improvements in forest fire control are a major international issue in the quest to protect human lives and resources as well as to reduce the negative environmental impact of these fires to a minimum. Within this paper the development of a multi-functional airborne management support system within the frame of the Austrian national safety and security research programme (KIRAS) is described. The main goal of the developments is to assist crisis management tasks of civil emergency teams and armed forces in disaster management by providing multi spectral, near real-time airborne image data products. As time, flexibility and reliability as well as objective information are crucial aspects in emergency management, the used components are tailored to meet these requirements. An airborne multi-functional management support system was developed as part of the national funded project AIRWATCH, which enables real-time monitoring of natural disasters based on optical and thermal images. Airborne image acquisition, a broadband line of sight downlink and near real-time processing solutions allow the generation of an up-to-date geo-referenced situation map. Furthermore, this paper presents ongoing developments for innovative extensions and research activities designed to optimize command operations in national and international fire

  20. 77 FR 14006 - Record of Decision for the Military Housing Privatization Initiative Hurlburt Field and Eglin Air...

    Science.gov (United States)

    2012-03-08

    ... Department of the Air Force Record of Decision for the Military Housing Privatization Initiative Hurlburt Field and Eglin Air Force Base, Florida, Final Environmental Impact Statement ACTION: Notice of... (42 U.S.C. 4321, et seq.) and the Air Force's Environmental Impact Analysis Process (EIAP) (32...