WorldWideScience

Sample records for aero medical society

  1. Aero-medical evacuation from the second Israel-Lebanon war: a descriptive study.

    Science.gov (United States)

    Schwartz, Dagan; Resheff, Avram; Geftler, Alex; Weiss, Aviram; Birenbaum, Erez; Lavon, Ophir

    2009-05-01

    The second Lebanon war started as a limited operation and progressed to a large-scale campaign. Most of the fighting took place in mountainous villages and small towns inhabited with civilians. The Israeli Defense Forces (IDF) Airborne rescue and evacuation unit is charged with air evacuation of soldiers and civilians in times of peace, limited conflict, and war. We describe this unit's activities in the second Lebanon war, analyzing injury, treatment, and evacuation characteristics Data were collected from flight medical reports, debriefings of aero-medical team members (usually immediately upon return from mission), ground units medical reports and debriefings, and hospital records. 725 IDF soldiers were injured and 117 killed either in Lebanon or near the Israeli-Lebanese border during the war. A total of 338 (46%) were evacuated in 95 airlifts (averaging 4.5 evacuees per airlift) from the fighting zones or the border. Air evacuation used dedicated helicopters with advanced care capacities, and most victims were evacuated straight from the battlefield, as the fighting was ensuing. Many wounded first received advanced medical care upon the arrival of the aero-medical teams. In military operations within civilian populated areas with threats to ground transport, air evacuation can sometimes be the only readily available option. Providing timely ground advanced medical care proved difficult in many instances. Thus, for many, the rescue helicopter was the first point of access to such care. Aero-medical aircrafts and personnel faced threats from gunfire and missiles, causing both delays in evacuation and a high average number of evacuees per airlift. This article proposes ways of coping with situations in which similar rescue and evacuation problems are likely.

  2. Emergency airway management in critically injured patients: a survey of U.S. aero-medical transport programs.

    Science.gov (United States)

    James, Dorsha N; Voskresensky, Igor V; Jack, Meg; Cotton, Bryan A

    2009-06-01

    Pre-hospital airway management represents the intervention most likely to impact outcomes in critically injured patients. As such, airway management issues dominate quality improvement (QI) reviews of aero-medical programs. The purpose of this study was to evaluate current practice patterns of airway management in trauma among U.S. aero-medical service (AMS) programs. The Association of Air Medical Services (AAMS) Resource Guide from 2005 to 2006 was utilized to identify the e-mail addresses of all directors of U.S. aero-medical transport programs. Program directors from 182 U.S. aero-medical programs were asked to participate in an anonymous, web-based survey of emergency airway management protocols and practices. Non-responders to the initial request were contacted a second time by e-mail. 89 programs responded. 98.9% have rapid sequence intubation (RSI) protocols. 90% use succinylcholine, 70% use long-acting neuromuscular blockers (NMB) within their RSI protocol. 77% have protocols for mandatory in-flight sedation but only 13% have similar protocols for maintenance paralytics. 60% administer long-acting NMB immediately after RSI, 13% after confirmation of neurological activity. Given clinical scenarios, however, 97% administer long-acting NMB to patients with scene and in-flight Glasgow Coma Scale (GCS) of 3, even for brief transport times. The majority of AMS programs have well defined RSI and in-flight sedation protocols, while protocols for in-flight NMB are uncommon. Despite this, nearly all programs administer long-acting NMB following RSI, irrespective of GCS or flight time. Given the impact of in-flight NMB on initial assessment, early intervention, and injury severity scoring, a critical appraisal of current AMS airway management practices appears warranted.

  3. [125 years' of the Serbian Medical Society].

    Science.gov (United States)

    Sulović, V; Pavlović, B

    1998-01-01

    In the second half of the last century and under the influence of the European civilization, Serbia abandoned the conservative and patriarchal way of life and began to introduce a new, contemporary political, cultural and social spirit into the country. The development of these civilizing features was under the influence of young intelectuals who, as former scholarship holders of the Serbian government, were educated in many European countries. Among them, there was a group of physicians who returned to the country after having completed their education. They were carriers and holders of the contemporary medical science in Serbia and the neighbouring areas. On April 22, 1872 a group of 15 physicians founded the Serbian Medical Society with the intention to offer an organized medical help and care to the population. The first president was Dr. Aćim Medović and the first secretary Dr. Vladan Dordević. At the meeting held on May 15, 1872 the text of the Statute of the Society was accepted and immediately submitted for approval to the Ministry of Internal Affairs. In the letter addressed to the minister of internal affairs the following reasons were cited: "... The Belgrade physicians feeling a need for having the main office for their professional and scientific meetings, for which they will find the opportunity and the funds, and in spite of their hard medical labor which requires almost all their time, decided to establish the Serbian Medical Society because they wish to be in trend and follow-up the medical progress and exchange the latest medical information not only among them but also with other graduated doctors living in areas with the Serblan population as well as with all scientists who are willing to contribute to the development of medical science in Serbia...". In the first year of its existence the Serbian Medical Society had 9 regular members, 1 honorary member and 34 corresponding members from Serbia, Slavic and other foreign countries. On August 5

  4. Teaching leadership: the medical student society model.

    Science.gov (United States)

    Matthews, Jacob H; Morley, Gabriella L; Crossley, Eleanor; Bhanderi, Shivam

    2018-04-01

    All health care professionals in the UK are expected to have the medical leadership and management (MLM) skills necessary for improving patient care, as stipulated by the UK General Medical Council (GMC). Newly graduated doctors reported insufficient knowledge about leadership and quality improvement skills, despite all UK medical schools reporting that MLM is taught within their curriculum. A medical student society organised a series of extracurricular educational events focusing on leadership topics. The society recognised that the events needed to be useful and interesting to attract audiences. Therefore, clinical leaders in exciting fields were invited to talk about their experiences and case studies of personal leadership challenges. The emphasis on personal stories, from respected leaders, was a deliberate strategy to attract students and enhance learning. Evaluation data were collected from the audiences to improve the quality of the events and to support a business case for an intercalated degree in MLM. When leadership and management concepts are taught through personal stories, students find it interesting and are prepared to give up their leisure time to engage with the subject. Students appear to recognise the importance of MLM knowledge to their future careers, and are able to organise their own, and their peers', learning and development. Organising these events and collecting feedback can provide students with opportunities to practise leadership, management and quality improvement skills. These extracurricular events, delivered through a student society, allow for subjects to be discussed in more depth and can complement an already crowded undergraduate curriculum. Newly graduated doctors reported insufficient knowledge about leadership and quality improvement skills. © 2017 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

  5. Medical radiography and information societies: Challenges and opportunities

    International Nuclear Information System (INIS)

    Kalra, H.P.S.

    2006-01-01

    This paper presents the perspective from a less developed country for broadening the horizon of medical imaging as an integral part of medical records and biomedical information. From the industrial to the information society, the number as well as the diversity of stakeholders in the medical records and medical information has grown. this call for a fresh outlook on medical radiography and medical imaging

  6. understanding medical ethics in a contemporary society

    African Journals Online (AJOL)

    drclement

    these basic principles will go a long way in reducing the ... medical practitioner must therefore be prepared at all ... physician accepts to see a patient, he must define in his ... tells the nurse who is doing daily ..... International Journal of Medical ...

  7. Engagement of the medical-technology sector with society.

    Science.gov (United States)

    Williams, David; Edelman, Elazer R; Radisic, Milica; Laurencin, Cato; Untereker, Darrel

    2017-04-12

    The medical-technology sector must educate society in an unbiased rational way about the successes and benefits of biotechnology innovation. Copyright © 2017, American Association for the Advancement of Science.

  8. [The importance of the Czech Medical Society yesterday and today].

    Science.gov (United States)

    Fejfar, Z

    1992-10-23

    Fourteen physicians headed by Jan Evangelista Purkynĕ signed the proposed by-laws of the Czech medical society in october 1861. Emperor's approval was received 26th june 1862 and in july Purkynĕ was elected the first president. The same illuminated personalities were the founders of the Casopis lékarů ceských--the Czech medical Journal which has remained the most important Czech periodical until the present time. The aims of the Society were to cultivate medical science and promote Czech language in medicine. Weekly scientific sessions, medical periodical and publication of monographs related to medicine were the means how to achieve the aims. The Czech Medical Society became soon the centre of medical science in Bohemia. Its members were among the foremost fighters for the use of Czech language in Charles university and their relentless effort helped much to the establishment of the Czech Univerzity in 1882 and Czech medical faculty a year later. In subsequent years the Society was also involved in professional problems related to social health insurance, medical fees, ethical problems and other relevant questions such as the establishment of medical chambers. The activity of the Czech medical Society was never interrupted during its 130 years of existence, although there were several difficult periods in its life, mainly during the first and second world war and also in the past 40 years. In spite of the atomization of medicine the Czech medical Society has been continuing its eminent mission to create communication and establish close links between the medical science and practical medicine by systematically bringing new knowledge in medicine and biology to general physicians and by putting together physicians, surgeons and basic scientists. The task for the future is seen in optimal transfer of new knowledge and ideas from scientists to practicians and vice versa; and to take care of the highest possible moral and ethical standard required for humane

  9. Medical Informatics Impact of Information Society in Health Care Development

    Czech Academy of Sciences Publication Activity Database

    Zvárová, Jana

    2005-01-01

    Roč. 9, - (2005), s. 269-274 ISSN 1335-2393. [YBERC 2005. Young Biomedical Engineers and Researchers Conference. Stará Lesná, 13.07.2005-15.07.2005] Institutional research plan: CEZ:AV0Z10300504 Keywords : medical informatics * information society * telemedicine * education * research and development Subject RIV: BD - Theory of Information

  10. [125th anniversary of the Serbian Medical Society].

    Science.gov (United States)

    Sulović, V; Pavlović, B

    2002-01-01

    Serbian Medical Society was founded on April 22, 1872. Foundation initiators were physicians of the following nationalities: 5 Serbs, 3 Czechs, 2 Poles, 3 Germans, 1 Slovak and 1 Greek. Josip Pancić was one of its founders as well, and the first president of the Serbian Academy of Sciences and Arts. Dr. Aćim Medović was elected its first President at the Inaugural Assembly, and Dr. Vladan Dordević its Secretary. Later, on October 17, 1874 Constitution of the Serbian Medical Society was passed and its was acknowledged by the Serbian Interior Minister. The first professional meeting was held on August 5, 1872, when they started the first medical journal named "Serbian Archives for All Physicians" ("Srpski arhiv za celokupno lekarstvo") that is being published regularly even today. At the proposal of SLD a Law on Medical Protection was passed (1881). This Law was translated into two European languages, German and French, and sent to be reconsidered by 400 towns throughout Europe. This Law included, beside the other things, the following: "...penny intended for health cannot be spent either by King, or by the Government or by any political party because it is intended for the health, tratement of the sick and doctors' salaries..." The first Congress of the Serbian physicians and scientists devoted to natural sciences was held in Belgrade from 5th to 7th of September, 1904, and it gahtered about 433 participants, among which over hundred were from abroad. In 1907 SLD organized in Belgrade "The First Scientific Conference of Yugoslav Doctors for Operating Surgery". Red Cross in Serbia was founded upon the initiative of SLD. The first initiative to establish the School of Medicine in Belgrade was given by SLD as well. Members of SLD proved their loyalty and devotion to their people, democracy and liberty during liberation wars in XIX and XX century by putting themselves in service of the sich and wrecked. Today, SLD realizes its professional activity through the work

  11. Meals at medical specialty society annual meetings: a preliminary assessment.

    Science.gov (United States)

    La Puma, John; Schiedermayer, David; Becker, Jennifer

    2003-01-01

    Little isd known about how meals are chosen for medical meetings. We surveyed the annual meeting planners for 20 major specialty societies. Thirteen (65%) responded; all were currently planning their next meeting. Attendance in 2000 was reported at 113,477 physicians, with 2 million planned meals and snacks. No physician was named as responsible for food choices; the meeting planner and staff were primarily responsible for deciding what food to serve, excluding exhibit halls. Twelve (92%) respondents rated "available budget" as the most important factor. "Nutritional guidelines" were rated "very important" by eight of 13 (63%). However, no specific nutritional guidelines could be identified by any planner. All respondents indicated that members would attend a meeting if "healthy" food were the only option. For 2000, 100% of respondents indicated that for each lunch and for each dinner, a dessert had been included. No annual meeting and no planned 2001 meeting excluded potato chips, snack mixes, or candies at breaks; soda pop was offered at each break. Most respondents (89%) relied on a concluding questionnaire about the meeting facilities to evaluate the food. Respondents reported no difference in charges for "special meals," including vegetarian and kosher meals. Physicians may be unaware that some food served at medical meetings may impair learning, with excessive calorie, fat, and carbohydrate consumption. Small changes can improve the quality of food and beverages selected, without increased cost, and provide choices that conform to national nutritional guidelines. Medical meetings should serve flavorful, healthful food.

  12. Sensor fault diagnosis of aero-engine based on divided flight status.

    Science.gov (United States)

    Zhao, Zhen; Zhang, Jun; Sun, Yigang; Liu, Zhexu

    2017-11-01

    Fault diagnosis and safety analysis of an aero-engine have attracted more and more attention in modern society, whose safety directly affects the flight safety of an aircraft. In this paper, the problem concerning sensor fault diagnosis is investigated for an aero-engine during the whole flight process. Considering that the aero-engine is always working in different status through the whole flight process, a flight status division-based sensor fault diagnosis method is presented to improve fault diagnosis precision for the aero-engine. First, aero-engine status is partitioned according to normal sensor data during the whole flight process through the clustering algorithm. Based on that, a diagnosis model is built for each status using the principal component analysis algorithm. Finally, the sensors are monitored using the built diagnosis models by identifying the aero-engine status. The simulation result illustrates the effectiveness of the proposed method.

  13. Sensor fault diagnosis of aero-engine based on divided flight status

    Science.gov (United States)

    Zhao, Zhen; Zhang, Jun; Sun, Yigang; Liu, Zhexu

    2017-11-01

    Fault diagnosis and safety analysis of an aero-engine have attracted more and more attention in modern society, whose safety directly affects the flight safety of an aircraft. In this paper, the problem concerning sensor fault diagnosis is investigated for an aero-engine during the whole flight process. Considering that the aero-engine is always working in different status through the whole flight process, a flight status division-based sensor fault diagnosis method is presented to improve fault diagnosis precision for the aero-engine. First, aero-engine status is partitioned according to normal sensor data during the whole flight process through the clustering algorithm. Based on that, a diagnosis model is built for each status using the principal component analysis algorithm. Finally, the sensors are monitored using the built diagnosis models by identifying the aero-engine status. The simulation result illustrates the effectiveness of the proposed method.

  14. Manchester medical society (imaging section) presidential address 2008

    Energy Technology Data Exchange (ETDEWEB)

    Blakeley, C. [University of Salford (United Kingdom); Manchester Royal Infirmary (CMFT) (United Kingdom)], E-mail: c.blakeley@salford.ac.uk; Hogg, P. [University of Salford (United Kingdom)

    2009-12-15

    This article is based partly upon the Presidential Address of the Manchester Medical Society (Imaging Section) in 2008. It reviews the development of radiology services in the Manchester (UK) area from their inception in 1896 to the installation of the first EMI body CT scanner in Europe. It considers some of the innovative people in the Manchester area and some milestone events that occurred in that area to help establish the role and value of X-ray in diagnostic imaging. In this article the first recorded case of when X-ray imaging was used in a forensic domiciliary case is also outlined; this occurred approximately 35 miles north of Manchester on 23rd April 1896. The article also explains some interesting background information on the development of the first EMI CT scanner, drawing particularly on the revenue stream generated by the music section of EMI through the success of The Beatles - a band which emanated 35 miles from Manchester in Liverpool.

  15. Manchester medical society (imaging section) presidential address 2008

    International Nuclear Information System (INIS)

    Blakeley, C.; Hogg, P.

    2009-01-01

    This article is based partly upon the Presidential Address of the Manchester Medical Society (Imaging Section) in 2008. It reviews the development of radiology services in the Manchester (UK) area from their inception in 1896 to the installation of the first EMI body CT scanner in Europe. It considers some of the innovative people in the Manchester area and some milestone events that occurred in that area to help establish the role and value of X-ray in diagnostic imaging. In this article the first recorded case of when X-ray imaging was used in a forensic domiciliary case is also outlined; this occurred approximately 35 miles north of Manchester on 23rd April 1896. The article also explains some interesting background information on the development of the first EMI CT scanner, drawing particularly on the revenue stream generated by the music section of EMI through the success of The Beatles - a band which emanated 35 miles from Manchester in Liverpool.

  16. The European Society for Medical Oncology (ESMO) Precision Medicine Glossary.

    Science.gov (United States)

    Yates, L R; Seoane, J; Le Tourneau, C; Siu, L L; Marais, R; Michiels, S; Soria, J C; Campbell, P; Normanno, N; Scarpa, A; Reis-Filho, J S; Rodon, J; Swanton, C; Andre, F

    2018-01-01

    Precision medicine is rapidly evolving within the field of oncology and has brought many new concepts and terminologies that are often poorly defined when first introduced, which may subsequently lead to miscommunication within the oncology community. The European Society for Medical Oncology (ESMO) recognises these challenges and is committed to support the adoption of precision medicine in oncology. To add clarity to the language used by oncologists and basic scientists within the context of precision medicine, the ESMO Translational Research and Personalised Medicine Working Group has developed a standardised glossary of relevant terms. Relevant terms for inclusion in the glossary were identified via an ESMO member survey conducted in Autumn 2016, and by the ESMO Translational Research and Personalised Medicine Working Group members. Each term was defined by experts in the field, discussed and, if necessary, modified by the Working Group before reaching consensus approval. A literature search was carried out to determine which of the terms, 'precision medicine' and 'personalised medicine', is most appropriate to describe this field. A total of 43 terms are included in the glossary, grouped into five main themes-(i) mechanisms of decision, (ii) characteristics of molecular alterations, (iii) tumour characteristics, (iv) clinical trials and statistics and (v) new research tools. The glossary classes 'precision medicine' or 'personalised medicine' as technically interchangeable but the term 'precision medicine' is favoured as it more accurately reflects the highly precise nature of new technologies that permit base pair resolution dissection of cancer genomes and is less likely to be misinterpreted. The ESMO Precision Medicine Glossary provides a resource to facilitate consistent communication in this field by clarifying and raising awareness of the language employed in cancer research and oncology practice. The glossary will be a dynamic entity, undergoing

  17. Are Italian medical societies bridging the distance from citizen and patients' associations? Results of a survey.

    Science.gov (United States)

    Mosconi, P; Colombo, C; Guella, F; Pierotti, B; Vimercati, F

    2008-09-01

    In the framework of PartecipaSalute--an Italian research project aimed to involve lay people, patients' associations and scientific-medical representatives on the health debate --we carried out a survey with the Italian Federation of Medical Societies. The aims of the survey were to know medical societies attitude vs. patients involvement in research activities and healthcare setting and to find out possible projects conducted in partnership with patients associations. A web-questionnaire with 17 closed questions, and three open questions has been prepared on the basis of some experiences published on the literature and through the collaboration of members of the Italian Federation of Medical Societies. A total of 205 medical societies has been contacted by e-mail with a cover letter explaining the aims of the survey. At the end 74 medical societies completed the survey. Medical societies participating to the survey varied widely in terms of years of activity, number of members, and geographical distribution. Remarkably, 36 medical societies respondent organized collaborative initiatives with patients/consumers associations during the last three years. Among these, the most frequent were the preparation of written material for patients, organization of conferences or workshops, and health awareness campaigns. Moreover, 6 medical societies published documents on patients' rights but patients or their associations were involved in only 2 of these initiatives. Advantages and disadvantages reported by medical societies answering are also presented and discussed. In conclusion, to our knowledge this is the first survey on the value of patients' involvement conducted together with medical societies in Italy, and the results point the way to stronger collaboration in future between patients' associations and medical societies.

  18. Equipment for Aero-Optical Flow Imaging

    National Research Council Canada - National Science Library

    Catrakis, Haris

    2004-01-01

    The AFOSR/DURIP Grant has provided the funds to develop a new Aero-Optics Laboratory at UC Irvine, in order to do basic research on aero-optical laser beam propagation through high-speed turbulent flows...

  19. Educating medical students for work in culturally diverse societies.

    Science.gov (United States)

    Loudon, R F; Anderson, P M; Gill, P S; Greenfield, S M

    1999-09-01

    Recent attention has focused on whether government health service institutions, particularly in the United Kingdom, reflect cultural sensitivity and competence and whether medical students receive proper guidance in this area. To systematically identify educational programs for medical students on cultural diversity, in particular, racial and ethnic diversity. The following databases were searched: MEDLINE (1963-August 1998); Bath International Data Service (BIDS) Institute for Scientific Information science and social science citation indexes (1981-August 1998); BIDS International Bibliography for the Social Sciences (1981-August 1998); and the Educational Resources Information Centre (1981-August 1998). In addition, the following online data sets were searched: Kings Fund; Centre for Ethnic Relations, University of Warwick; Health Education Authority; European Research Centre on Migration and Ethnic Relations, University of Utrecht; International Centre for Intercultural Studies, University of London; the Refugee Studies Programme, University of Oxford. Medical education and academic medicine journals (1994-1998) were searched manually and experts in medical education were contacted. Studies included in the analysis were articles published in English before August 1998 that described specific programs for medical students on racial and ethnic diversity. Of 1456 studies identified by the literature search, 17 met the criteria. Two of the authors performed the study selection independently. The following data were extracted: publication year, program setting, student year, whether a program was required or optional, the teaching staff and involvement of minority racial and ethnic communities, program length, content and teaching methods, student assessment, and nature of program evaluation. Of the 17 selected programs, 13 were conducted in North America. Eleven programs were exclusively for students in years 1 or 2. Fewer than half (n = 7) the programs were part of

  20. French Society of Medical Physics. 55. Scientific Days, Abstract collection

    International Nuclear Information System (INIS)

    2016-06-01

    This publication gathers abstracts of oral contributions and papers presented during a conference. Oral contributions were presented in different sessions: Proton/hadron therapy, Adaptive radiotherapy, Imagery in radiotherapy (preprocessing, IGRT...), Research in medical physics, Equipment quality insurance, Treatment planning, Use of MRI in radiotherapy, Advanced techniques in radiotherapy, PET/MRI based nuclear medicine, Optimisation in nuclear medicine, Radiology/MRI/ultrasound. Posters addressed the following themes: Radiotherapy, Nuclear medicine, Radiology/MRI/Ultrasound

  1. The medicalization of society: on the transformation of human conditions into treatable disorders

    National Research Council Canada - National Science Library

    Conrad, Peter

    2007-01-01

    ... 197This page intentionally left blank PrefacePreface I have been interested in the medicalization of society for a long time. My Ph.D. dissertation was a participant observation study of the medicalization of hyperactivity in children (Conrad, 1976). This was followed by a more historical account of the medicalization of deviance, coau...

  2. [Survey on the medical mycology processes to the members of the French Society for Medical Mycology].

    Science.gov (United States)

    Kauffmann-Lacroix, C; Albouy-Llaty, M; Migeot, V; Contet-Audonneau, N

    2011-09-01

    The objective of the survey was to describe the practices of clinical laboratories in terms of cultures in medical mycology. We have implemented this project within the members of the French Society for Medical Mycology (SFMM) to evaluate the analytical processes of the mycological examination in our laboratories. This preliminary study would help to suggest the future French guidelines. A questionnaire regarding the processing of mycology analysis was sent to the 227 members of the SFMM in 2009. The data involved 21 types of samples, direct microscopic examination with or without colouring and the reagents, the number of culture media, the types of media (Sabouraud, Sabouraud antibiotic, Sabouraud cycloheximide and chromogenic medium), temperature and duration of the incubation (days) and the existence of a first result before the end of the incubation period. The analytical processes were compared to an accredited laboratory according to EN ISO 15189. A great heterogeneity was observed in the 36 forms from 27 (75%) laboratories belonging to university hospitals among the 38 existing in France. As for deep samples, two microscopic exams were performed, only one was usually done. A more sensitive technique was preferred to the wet-mount for some samples. Routine samples are often inoculated on a chromogenic media. For deep samples two medium are inoculated (chromogenic media, Sabouraud and antibiotics). If the temperature of incubation is unique, 30°C was chosen. A temperature of 37°C was preferred for samples where Candida spp. is selected. When there are two temperatures of incubation, 27°C and 37°C were preferred. Each biologist can compare his proceedings to the other laboratories and to a laboratory already accredited. The question is to find the best strategies for each medical mycology specimen. They will aid the process of accreditation according to EN ISO 15189, which now applies in all laboratories in Europe. Copyright © 2011 Elsevier Masson SAS

  3. 2nd Annual Conference of Bangladesh Medical Physics Society

    Directory of Open Access Journals (Sweden)

    Bangladesh Medical Physics Society (BMPS

    2013-10-01

    Full Text Available Following abstracts proceedings are available in PDF:Challenges in brachytherapy dosimetryEssentials of periodic QA in radiation therapyInterventional radiotherapy or brachytherapy: new challenges for a successful techniqueExternal beam radiotherapy and high dose rate (HDR brachytherapy treatment for carcinoma cervix practice in BPKMCH, Bharatpur, NepalTransition from 2D to 3D-CRT (NICRH experienceConformal HDR brachytherapy for prostate cancer: comparison between boost and monotherapyImportance and procedures of quality control of diagnostic CT and CT simulator using for modern radiation therapyMedical physics and biomedical engineering education in Gono UniversityPlan verification in tomotherapy using 3D semiconductor detectorComparison of the miniaturized Co-60 and Ir-192 sources in HDR brachytherpy applicationsA Supine based cranio-spinal irradiation technique using moving field junctions radiotherapyStatistical variation and significance in the responses of thyroid follicular cells of two areas of Bangladesh due to radiotherapy into head and neck regionDetermining proper patient’s set-up parameters like IFD, gantry angles, and field width in Ca. breast to achieve precise treatment, in a center where TPS & simulators are not availableAccidental exposure of cancer patient and its preventionComparison of physical and enhanced dynamic wedges beam characteristics for 6 MV photon energy using pencil-beam convolution (PBC algorithmProcedure to set up a radiotherapy unit & low cost unit analysisPatient setup verification and quality control (QC of electronic portal imaging device (EPID

  4. Medical societies, patient education initiatives, public debate and marketing of unproven stem cell interventions.

    Science.gov (United States)

    Weiss, Daniel J; Turner, Leigh; Levine, Aaron D; Ikonomou, Laertis

    2018-02-01

    Businesses marketing unproven stem cell interventions proliferate within the U.S. and in the larger global marketplace. There have been global efforts by scientists, patient advocacy groups, bioethicists, and public policy experts to counteract the uncontrolled and premature commercialization of stem cell interventions. In this commentary, we posit that medical societies and associations of health care professionals have a particular responsibility to be an active partner in such efforts. We review the role medical societies can and should play in this area through patient advocacy and awareness initiatives. Copyright © 2017 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

  5. A guide for good practices in medical physics - French Society of Medical Physics

    International Nuclear Information System (INIS)

    Rosenwald, Jean-Claude; Aventin, Christophe; Coste, Frederic; Francois, Pascal; Ginestet, Chantal; Perrin, Benedicte; Salvat, Cecile; Caselles, Olivier; Dedieu, Veronique; Dejean, Catherine; Batalla, Alain; Guillaume, Bonniaud; LeDu, Dominique; Lisbona, Albert; Marchesi, Vincent; Sarrazin, Thierry; Mazeron, Jean-Jacques; Lipinski, Francis; Vera, Pierre; Maximilien Vermandel; Ducou le Pointe, Hubert; Vidal, Vincent; Henry, Cecile; Mazeau-Woynar, Valerie; Prot, Camille; Valero, Marc; Aubert, Bernard; Etard, Cecile; Jimonet, Christine; Roue, Amelie; Sage, Julie; Bardies, Manuel; Beauvais, Helene; Bey, Pierre; Costa, Andre; Desblancs, Claire; Eudaldo, Teresa; Farman, Bardia; Ferrand, Regis; Garcia, Robin; Giraud, Jean-Yves; Husson, Francois; Koulibaly, Malick; Carlan, Loic de; Manens, Jean-Pierre; Naudy, Suzanne; Noel, Alain; Pilette, Pierre; Verdun, Francis

    2012-12-01

    After a presentation of the methodological approach used to write this book, the first chapter addresses the profession of medical physicist: medical physics in France (history, evolution of the profession, of the education and of regulation), legal framework (related to the medical use of ionizing radiations, legal texts directly concerning medical physics, regulations impacting the professional practice of medical physicists), scopes of intervention of the medical physicist (context, missions, dose management, image quality, quality management and safety, relationship with the patient, education, training and research, relationships with industry, cost management), operating conditions, and good professional practices. The second chapter addresses the principles of management of quality and safety: quality management in medical physics, safety management, quality and safety in health care facilities. The third part addresses good practices in medical physics: general principles of working methods, equipment management, participation to clinic activities

  6. Guide of good practices in medical physics - French Society of Medical Physics

    International Nuclear Information System (INIS)

    Rosenwald, Jean-Claude; Aventin, Christophe; Coste, Frederic; Francois, Pascal; Ginestet, Chantal; Perrin, Benedicte; Salvat, Cecile; Caselles, Olivier; Dedieu, Veronique; Dejean, Catherine; Batalla, Alain; Guillaume, Bonniaud; Le Du, Dominique; Lisbona, Albert; Marchesi, Vincent; Sarrazin, Thierry; Mazeron, Jean-Jacques; Lipinski, Francis; Vera, Pierre; Vermandel, Maximilien; Ducou le Pointe, Hubert; Vidal, Vincent; Henry, Cecile; Mazeau-Woynar, Valerie; Prot, Camille; Valero, Marc; Aubert, Bernard; Etard, Cecile; Jimonet, Christine; Roue, Amelie; Sage, Julie; Bardies, Manuel; Beauvais, Helene; Bey, Pierre; Costa, Andre; Desblancs, Claire; Eudaldo, Teresa; Farman, Bardia; Ferrand, Regis; Garcia, Robin; Giraud, Jean-Yves; Husson, Francois; Koulibaly, Malick; Carlan, Loic de; Manens, Jean-Pierre; Naudy, Suzanne; Noel, Alain; Pilette, Pierre; Verdun, Francis; Bouette, Aurelien; Breen, Stephen; Bridier, Andre; Chauvenet, Bruno; Chavaudra, Jean; Gardin, Isabelle; Herlevin, Karine

    2012-01-01

    After a presentation of the methodological approach used to write this book, the first chapter addresses the profession of medical physicist: medical physics in France (history, evolution of the profession, of the education and of regulation), legal framework (related to the medical use of ionizing radiations, legal texts directly concerning medical physics, regulations impacting the professional practice of medical physicists), scopes of intervention of the medical physicist (context, missions, dose management, image quality, quality management and safety, relationship with the patient, education, training and research, relationships with industry, cost management), operating conditions, and good professional practices. The second chapter addresses the principles of management of quality and safety: quality management in medical physics, safety management, quality and safety in health care facilities. The third part addresses good practices in medical physics: general principles of working methods, equipment management, participation to clinic activities

  7. Medical student selection and society: Lessons we learned from sociological theories.

    Science.gov (United States)

    Yaghmaei, Minoo; Yazdani, Shahram; Ahmady, Soleiman

    2016-01-01

    The aim of this study was to show the interaction between the society, applicants and medical schools in terms of medical student selection. In this study, the trends to implement social factors in the selection process were highlighted. These social factors were explored through functionalism and conflict theories, each focusing on different categories of social factors. While functionalist theorists pay attention to diversity in the selection process, conflict theorists highlight the importance of socio-economic class. Although both theories believe in sorting, their different views are reflected in their sorting strategies. Both theories emphasize the importance of the person-society relationship in motivation to enter university. Furthermore, the impacts of social goals on the selection policies are derived from both theories. Theories in the sociology of education offer an approach to student selection that acknowledges and supports complexity, plurality of approaches and innovative means of selection. Medical student selection does not solely focus on the individual assessment and qualification, but it focuses on a social and collective process, which includes all the influences and interactions between the medical schools and the society. Sociological perspective of medical student selection proposes a model that envelops the individual and the society. In this model, the selection methods should meet the criteria of merit at the individual level, while the selection policies should aim at the society goals at the institutional level.

  8. [Anniversaries of the Serbian Medical Society. 60 years since its founding. The dream is fulfilled--the home of the Serbian Medical Society is opened].

    Science.gov (United States)

    Vuković, Z

    1998-01-01

    The Serbian Medical Society was founded in Belgrade in 1872, 126 years ago. At that time, Serbia was liberated from the Ottoman domination, and was one of some thirty existing independent states gaining international recognition in 1878. In 1932 an old dream has been fulfilled--on the occasion of the 60th anniversary of the existence and activity of the Serbian Medical Society--the home of Serbian Medical Society was opened. A 30-year-long period in which the building of the Home was one of the main preoccupations and a "guiding light" of Serbian doctors thus ended. Money from charitable funds was used, which caused certain benefactors to be praised as noted personalities. Medical practice in those days was in the state of choice. There were no means for adequate treatment of certain ailments, and therapy without realistic scientific base was given, often covered by fictitious reasons. This was especially true for tuberculosis and cancer. Under the pretext of the introduction of "new therapeutical approaches" into medical practice and treatment, diverse pharmaceutical formulas were introduced without knowledge of their real effect--injections of milk, drug containing animal embrional cells and special attention was paid to transplantation of the sexual glands. The injection of "camphor oil" (5 cc) was thus "recommended, harmless but useless". The treatment of tuberculosis, which domineered the pathology of population, was very chaotic. The greatest number of drugs for "successful cure" were to be found here. Most commotion was caused by the so-called Friedman's cure for tuberculosis which was rejected only after vigorous debates. Our drug "Joannin" on the basis of "the old tuberculine" was also represented in this confusion (and Koch himself was forced to recant it). This medicament was also hailed as "successful cure". The origin of serious scientific efforts, however, are to be found around newly formed journal "Medicinski pregled", which attracted new and

  9. [Medical Care for Homeless People - Individual Right and a Social Duty for an Inclusive Society].

    Science.gov (United States)

    Trabert, G

    2016-02-01

    Homelessness is a social phenomenon of increasing frequency in Germany and of high relevance for an inclusive society. Its expression is both caused psychosocially and moderated socioeconomically, often with negatively reinforcing feedback-loops. This overview describes health effects and strategies for improvement, using the example of the "Mainzer Modell". The comprehensive availability of adequate medical care are both an individual right and a social duty for an inclusive society. © Georg Thieme Verlag KG Stuttgart · New York.

  10. Medical society engagement in contentious policy reform: the Ethiopian Society for Obstetricians and Gynecologists (ESOG) and Ethiopia's 2005 reform of its Penal Code on abortion.

    Science.gov (United States)

    Holcombe, Sarah Jane

    2018-05-01

    Unsafe abortion is one of the three leading causes of maternal mortality in low-income countries; however, few countries have reformed their laws to permit safer, legal abortion, and professional medical associations have not tended to spearhead this type of reform. Support from a professional association typically carries more weight than does that from an individual medical professional. However, theory predicts and the empirical record largely reveals that medical associations shy from engagement in conflictual policymaking such as on abortion, except when professional autonomy or income is at stake. Using interviews with 10 obstetrician-gynaecologists and 44 other leaders familiar with Ethiopia's reproductive health policy context, as well as other primary and secondary sources, this research examines why, counter to theoretical expectations from the sociology of medical professions literature and experience elsewhere, the Ethiopian Society of Obstetricians & Gynecologists (ESOG) actively supported reform of national law on abortion. ESOG leadership participation was motivated by both individual and ESOG's organizational commitments to reducing maternal mortality and also by professional training and work experience. Further, typical constraints on medical society involvement in policymaking were relaxed or removed, including those related to ESOG's organizational structure and history, and to political environment. Findings do not contradict theory positing medical society avoidance of socially conflictual health policymaking, but rather identify how the expected restrictions were less present in Ethiopia, facilitating medical society participation. Results can inform efforts to encourage medical society participation in policy reform to improve women's health elsewhere in sub-Saharan Africa.

  11. The future of graduate medical education in Germany - position paper of the Committee on Graduate Medical Education of the Society for Medical Education (GMA).

    Science.gov (United States)

    David, Dagmar M; Euteneier, Alexander; Fischer, Martin R; Hahn, Eckhart G; Johannink, Jonas; Kulike, Katharina; Lauch, Robert; Lindhorst, Elmar; Noll-Hussong, Michael; Pinilla, Severin; Weih, Markus; Wennekes, Vanessa

    2013-01-01

    The German graduate medical education system is going through an important phase of changes. Besides the ongoing reform of the national guidelines for graduate medical education (Musterweiterbildungsordnung), other factors like societal and demographic changes, health and research policy reforms also play a central role for the future and competitiveness of graduate medical education. With this position paper, the committee on graduate medical education of the Society for Medical Education (GMA) would like to point out some central questions for this process and support the current discourse. As an interprofessional and interdisciplinary scientific society, the GMA has the resources to contribute in a meaningful way to an evidence-based and future-oriented graduate medical education strategy. In this position paper, we use four key questions with regards to educational goals, quality assurance, teaching competence and policy requirements to address the core issues for the future of graduate medical education in Germany. The GMA sees its task in contributing to the necessary reform processes as the only German speaking scientific society in the field of medical education.

  12. The education and training of professionals. The perspective of the Spanish Society of Medical Physics (SEFM)

    International Nuclear Information System (INIS)

    Eudaldo, T.; Millan, E.; Paredes, M.C.; Vano, E.; Peinado, F.; Nunez de Villavicencio, C.; Mateos, J.C.; Pena, J.J.

    2001-01-01

    The aim of this paper is twofold. First, to revise some European Communities' recommendations regarding qualification, education and training of professionals involved in ionisation radiation practices, to respond to the Directive 97/43 EURATOM. And then, as Medical Physicists are directly concerned with these practices, to describe how the Spanish Society of Medical Physics deals with the challenge of improving the competence of Medical Physicists in order to assure the best patient protection against ionisation radiation. Therefore, to achieve the first aim, the point of view of the European Federation of Organisations on Medical Physics (EFOMP) concerning the introduction of the 'Medical Physics Expert' and their guidelines for Continuous Professional Development are reviewed, as well as the point of view of European Society for Therapeutic Radiation Oncology (ESTRO) in professional education matters. Referring to the second aim, after succeeding in the recognition of the Medical Physics Speciality in Spain in 1997, the SEFM is now promoting the Continuous Education and Training of their specialists through its Education Committee (Comision de Docencia de la SEFM), so that they can cope with all new professional challenges. Moreover, a number of SEFM members are also involved in education matters to others professionals: Medicine students, nurses, Radiation Technologists, etc. In conclusion, the SEFM has always been aware of the importance of specialisation and continuous education of all professionals involved in radiation ionisation practices, as a way to contribute to guarantee the best radiation protection to the patients. (author)

  13. The library of the Royal Society of Physicians in Budapest becomes today's Semmelweis Medical History Library.

    Science.gov (United States)

    Kaproncszay, Katalin; Magyar, László András; Putnam, Constance E

    2011-01-01

    The 170-year history of the library of the Royal Society of Medicine in Budapest illustrates both that political and cultural context matter and that "medical" libraries, if they survive, in due course become primarily "medical history" libraries. Two of the authors are on the staff of the Semmelweis Medical History Library; the third is a US scholar who makes frequent use of the library. Together, they avail themselves of archival and published materials-and personal experience with the collection-to establish the context that produced the original library, trace its evolution, and describe its present-day incarnation. A tale of transformation emerges that reflects how collections are likely to change. The authors present events and individuals in the life of the Royal Society's library and paint a picture of the value of today's Semmelweis Medical History Library. Unique treasures in the collection are described. The story told here is of how a particular nineteenth-century library became a twenty-first-century institution. The authors establish its peculiarly Hungarian context and potential value to librarians and historians from outside Hungary. The overall message is that general medical libraries everywhere are perforce likely to become medical historical libraries over time.

  14. Partnering with a medical specialty society to perform online public health surveillance.

    Science.gov (United States)

    Hampson, Neil B; Bell, Jeneita; Clower, Jacquelyn H; Dunn, Susan L; Weaver, Lindell K

    2012-01-01

    While accidental carbon monoxide (CO) poisoning is common, it is felt to be largely preventable through targeted public education. Development of effective education programs requires accurate epidemiologic information about the condition. Many acute, severe cases of CO poisoning are treated with hyperbaric oxygen (HBO2) at hospital-based facilities staffed by members of the Undersea and Hyperbaric Medical Society (UHMS). In 2008, the Centers for Disease Control and Prevention (CDC) began sponsoring a UHMS proposal to use online reporting by UHMS members of cases treated with HBO2. This report describes development and implementation of the internet-based surveillance system, as well as its first year of operation. From August 2008 to July 2009, a total of 740 cases were reported by the 82 hyperbaric facilities participating nationwide. Extensive epidemiologic information about CO poisoning in the United States has been collected, and the utility of partnering with a medical specialty society for disease-specific surveillance demonstrated.

  15. Career opportunities and benefits for young oncologists in the European Society for Medical Oncology (ESMO)

    DEFF Research Database (Denmark)

    Morgan, Gilberto; Lambertini, Matteo; Kourie, Hampig Raphael

    2016-01-01

    The European Society for Medical Oncology (ESMO) is one of the leading societies of oncology professionals in the world. Approximately 30% of the 13 000 ESMO members are below the age of 40 and thus meet the society's definition of young oncologists (YOs). ESMO has identified the training...... and development of YOs as a priority and has therefore established a comprehensive career development programme. This includes a leadership development programme to help identify and develop the future leaders in oncology. Well-trained and highly motivated future generations of multidisciplinary oncologists...... are essential to ensure the optimal evolution of the field of oncology with the ultimate goal of providing the best possible care to patients with cancer. ESMO's career development portfolio is managed and continuously optimised by several dedicated committees composed of ESMO officers and is directly...

  16. [An introduction of the Translational Medical Science Committee (TMSC) of the Japanese Society of Neuropsychopharmacology].

    Science.gov (United States)

    Ishigooka, Jun

    2014-06-01

    The Japanese Society of Neuropsychopharmacology (NP) has established a Translational Medical Science Committee (TMSC), which is introduced in this article. In this century, the Japanese Government has made great effort to establish highly organized supporting systems for translational research (TR); however, clinical developments for psychotropic drugs in Japan are facing stagnation. TMSC will provide advisory activities from an academic point of view in this field, which will be result in the improvement of people's health.

  17. AeroMACS system characterization and demonstrations

    Science.gov (United States)

    Kerczewski, R. J.; Apaza, R. D.; Dimond, R. P.

    This The Aeronautical Mobile Airport Communications System (AeroMACS) is being developed to provide a new broadband wireless communications capability for safety critical communications in the airport surface domain, providing connectivity to aircraft and other ground vehicles as well as connections between other critical airport fixed assets. AeroMACS development has progressed from requirements definition through technology definition, prototype deployment and testing, and now into national and international standards development. The first prototype AeroMACS system has been deployed at the Cleveland Hopkins International Airport (CLE) and the adjacent NASA Glenn Research Center (GRC). During the past three years, extensive technical testing has taken place to characterize the performance of the AeroMACS prototype and provide technical support for the standards development process. The testing has characterized AeroMACS link and network performance over a variety of conditions for both fixed and mobile data transmission and has included basic system performance testing and fixed and mobile applications testing. This paper provides a summary of the AeroMACS performance testing and the status of standardization activities that the testing supports.

  18. Disability in society-medical and non-medical determinants for disability pension in a Norwegian total county population study.

    Science.gov (United States)

    Krokstad, Steinar; Westin, Steinar

    2004-05-01

    The objective of this study was to describe sociomedical determinants and developments for the medically based disability pension in Norway by linking individual based data from a county health survey to data on disability from the National Insurance Administration. Two cross-sectional total population health surveys with an approximate 10-year interval were conducted in Nord-Trøndelag county, HUNT I (1984-86) and HUNT II (1995-97), which allows for analyses of changes over time, supplied with official incidence data on disability pension. The large-scale variations and overall increasing incidence rates of disability pension in Norway during the last 20 years also applied to the county of Nord-Trøndelag. The prevalence of disability pension generally increased in the population from the mid-1980s to the mid-1990s. A striking finding was a consistent pattern of increasing prevalence of disability pension with decreasing socio-economic status and education. A geographic pattern for disability pension prevalence on a municipality level suggested that structural and cultural factors were important in determining the level of disability in society. Medical determinants alone cannot explain either the dramatic variations or the overall increased incidence rates of disability pension in the last two decades in Norway. The results demonstrate the importance of social, non-medical and contextual determinants for disability pension, how these determinants result in important prevalence differences by socio-economic status, and their impact on the level of disability in society.

  19. Medical countermeasures for national security: a new government role in the pharmaceuticalization of society.

    Science.gov (United States)

    Elbe, Stefan; Roemer-Mahler, Anne; Long, Christopher

    2015-04-01

    How do governments contribute to the pharmaceuticalization of society? Whilst the pivotal role of industry is extensively documented, this article shows that governments too are accelerating, intensifying and opening up new trajectories of pharmaceuticalization in society. Governments are becoming more deeply invested in pharmaceuticals because their national security strategies now aspire to defend populations against health-based threats like bioterrorism and pandemics. To counter those threats, governments are acquiring and stockpiling a panoply of 'medical countermeasures' such as antivirals, next-generation vaccines, antibiotics and anti-toxins. More than that, governments are actively incentivizing the development of many new medical countermeasures--principally by marshaling the state's unique powers to introduce exceptional measures in the name of protecting national security. At least five extraordinary policy interventions have been introduced by governments with the aim of stimulating the commercial development of novel medical countermeasures: (1) allocating earmarked public funds, (2) granting comprehensive legal protections to pharmaceutical companies against injury compensation claims, (3) introducing bespoke pathways for regulatory approval, (4) instantiating extraordinary emergency use procedures allowing for the use of unapproved medicines, and (5) designing innovative logistical distribution systems for mass drug administration outside of clinical settings. Those combined efforts, the article argues, are spawning a new, government-led and quite exceptional medical countermeasure regime operating beyond the conventional boundaries of pharmaceutical development and regulation. In the first comprehensive analysis of the pharmaceuticalization dynamics at play in national security policy, this article unearths the detailed array of policy interventions through which governments too are becoming more deeply imbricated in the pharmaceuticalization of

  20. Conflict of interest and professional medical associations: the North American Spine Society experience.

    Science.gov (United States)

    Schofferman, Jerome A; Eskay-Auerbach, Marjorie L; Sawyer, Laura S; Herring, Stanley A; Arnold, Paul M; Muehlbauer, Eric J

    2013-08-01

    Recently the financial relationships between industry and professional medical associations have come under increased scrutiny because of the concern that industry ties may create real or perceived conflicts of interest. Professional medical associations pursue public advocacy as well as promote medical education, develop clinical practice guidelines, fund research, and regulate professional conduct. Therefore, the conflicts of interest of a professional medical association and its leadership can have more far-reaching effects on patient care than those of an individual physician. Few if any professional medical associations have reported their experience with implementing strict divestment and disclosure policies, and among the policies that have been issued, there is little uniformity. We describe the experience of the North American Spine Society (NASS) in implementing comprehensive conflicts of interest policies. A special feature article. We discuss financial conflicts of interest as they apply to professional medical associations rather than to individual physicians. We describe the current policies of disclosure and divestment adopted by the NASS and how these policies have evolved, been refined, and have had no detrimental impact on membership, attendance at annual meetings, finances, or leadership recruitment. No funding was received for this work. The authors report no potential conflict-of-interest-associated biases in the text. The NASS has shown that a professional medical association can manage its financial relationships with industry in a manner that minimizes influence and bias. The NASS experience can provide a template for other professional medical associations to help manage their own possible conflicts of interest issues. Copyright © 2013 Elsevier Inc. All rights reserved.

  1. Factors Affecting Physician Satisfaction and Wisconsin Medical Society Strategies to Drive Change.

    Science.gov (United States)

    Coleman, Michele; Dexter, Donn; Nankivil, Nancy

    2015-08-01

    Physicians' dissatisfaction in their work is increasing, which is affecting the stability of health care in America. The Wisconsin Medical Society (Society) surveyed 1016 Wisconsin physicians to determine the source of their dissatisfaction. The survey results indicate Wisconsin physicians are satisfied when it comes to practice environment, work-life balance, and income. In addition, they are extremely satisfied when it comes to rating their ability to provide high quality care, and they have identified some benefits related to the adoption of electronic health records. However, they are feeling burned out, very unsatisfied with the amount of time spent in direct patient care compared to indirect patient care, and that they are spending too much time on administrative and data entry tasks. In terms of future workforce, many physicians are either unsure or would not recommend the profession to a prospective medical student. Electronic health records serve as both a satisfier and dissatisfier and as a potential driver for future physician satisfaction interventions. Changes at the institutional, organizational, and individual levels potentially could address the identified dissatisfiers and build upon the satisfiers. The Society identifies 12 strategies to improve upon the physician experience.

  2. Evaluation of medical research performance--position paper of the Association of the Scientific Medical Societies in Germany (AWMF).

    Science.gov (United States)

    Herrmann-Lingen, Christoph; Brunner, Edgar; Hildenbrand, Sibylle; Loew, Thomas H; Raupach, Tobias; Spies, Claudia; Treede, Rolf-Detlef; Vahl, Christian-Friedrich; Wenz, Hans-Jürgen

    2014-01-01

    The evaluation of medical research performance is a key prerequisite for the systematic advancement of medical faculties, research foci, academic departments, and individual scientists' careers. However, it is often based on vaguely defined aims and questionable methods and can thereby lead to unwanted regulatory effects. The current paper aims at defining the position of German academic medicine toward the aims, methods, and consequences of its evaluation. During the Berlin Forum of the Association of the Scientific Medical Societies in Germany (AWMF) held on 18 October 2013, international experts presented data on methods for evaluating medical research performance. Subsequent discussions among representatives of relevant scientific organizations and within three ad-hoc writing groups led to a first draft of this article. Further discussions within the AWMF Committee for Evaluation of Performance in Research and Teaching and the AWMF Executive Board resulted in the final consented version presented here. The AWMF recommends modifications to the current system of evaluating medical research performance. Evaluations should follow clearly defined and communicated aims and consist of both summative and formative components. Informed peer reviews are valuable but feasible in longer time intervals only. They can be complemented by objective indicators. However, the Journal Impact Factor is not an appropriate measure for evaluating individual publications or their authors. The scientific "impact" rather requires multidimensional evaluation. Indicators of potential relevance in this context may include, e.g., normalized citation rates of scientific publications, other forms of reception by the scientific community and the public, and activities in scientific organizations, research synthesis and science communication. In addition, differentiated recommendations are made for evaluating the acquisition of third-party funds and the promotion of junior scientists. With the

  3. The missions of medical schools: the pursuit of health in the service of society

    Directory of Open Access Journals (Sweden)

    Lewkonia Ray M

    2001-10-01

    Full Text Available Abstract Mission statements and role documents of medical schools in the United Kingdom, United States, Canada and Australia have been examined on their Internet Web sites and categorised in purpose, content and presentation. The format and content are highly variable, but there is a common vision of three integral roles, namely, education, advancement of knowledge and service to society. Other frequent themes include tradition and historical perspective, service for designated communities, and benchmarking to accreditation standards. Differences in content reflect variable interpretation of the notion of "mission", and local or national characteristics such as institutional affiliations, the types, levels and organisation of medical education, relationships with health systems, and extent of multi-professional education. Outcomes data and measures of medical school performance referenced to the institution's stated missions are rarely encountered. Mission documents placed on the Internet are in the public domain. These Web sites and documents and linked information constitute a valuable new resource for international exchange of approaches and ideas in medical education and generally in academic medicine. Routine inclusion of outcome or performance data could help to demonstrate the community roles and social accountability of medical schools This paper proposes that partial standardisation of these Web documents could enhance their value both internally and for external readers. A generic descriptive statement template is offered.

  4. [Medical behavior (deontology) towards our students, our colleagues, our patients and the society].

    Science.gov (United States)

    Grammaticos, Philip C

    2011-01-01

    In this paper we try to describe the importance of a dignified behavior of the physician to his students, colleagues, patients and the society. We come to the conclusion that even if the other party is not showing the best of behavior, the physician has not only the responsibility and the duty but it is very much for his own interest to show a dignified and useful behavior to others. This is the main route for having a good reputation which will help him better exercise his medical duties and offer him personal happiness. Jeremy Bentham, an English judge and philosopher formed the Greek word deontology to mean correct behavior stating that this behavior is morally useful and a source of pleasure. The codes of Hammurabi, of the Indian Ayr Veda, of the Egyptians, the teaching of Aristotle, Hippocrates and others also describe medical deontology.

  5. Method of making an aero-derivative gas turbine engine

    Science.gov (United States)

    Wiebe, David J.

    2018-02-06

    A method of making an aero-derivative gas turbine engine (100) is provided. A combustor outer casing (68) is removed from an existing aero gas turbine engine (60). An annular combustor (84) is removed from the existing aero gas turbine engine. A first row of turbine vanes (38) is removed from the existing aero gas turbine engine. A can annular combustor assembly (122) is installed within the existing aero gas turbine engine. The can annular combustor assembly is configured to accelerate and orient combustion gasses directly onto a first row of turbine blades of the existing aero gas turbine engine. A can annular combustor assembly outer casing (108) is installed to produce the aero-derivative gas turbine engine (100). The can annular combustor assembly is installed within an axial span (85) of the existing aero gas turbine engine vacated by the annular combustor and the first row of turbine vanes.

  6. Aero-disaster in Port Harcourt, Nigeria: A case study

    African Journals Online (AJOL)

    Aero-disaster in Port Harcourt, Nigeria: A case study ... Aero-disaster in Nigeria is posing a serious problem to government, the public and relatives of victims, ..... which was recorded in one of our victim's relation, ... this communication.

  7. Japanese Society of Medical Oncology Clinical Guidelines: Molecular Testing for Colorectal Cancer Treatment, Third Edition.

    Science.gov (United States)

    Yamazaki, Kentaro; Taniguchi, Hiroya; Yoshino, Takayuki; Akagi, Kiwamu; Ishida, Hideyuki; Ebi, Hiromichi; Nakatani, Kaname; Muro, Kei; Yatabe, Yasushi; Yamaguchi, Kensei; Tsuchihara, Katsuya

    2018-06-01

    The Japanese Society of Medical Oncology (JSMO) previously published 2 editions of the clinical guidelines: "Japanese guidelines for testing of KRAS gene mutation in colorectal cancer" in 2008 and "Japanese Society of Medical Oncology Clinical Guidelines: RAS (KRAS/NRAS) mutation testing in colorectal cancer patients" in 2014. These guidelines have contributed to the proper use of KRAS and RAS mutation testing, respectively. Recently, clinical utility, particularly for colorectal cancer (CRC) patients with BRAF V600E mutation or DNA mismatch-repair (MMR) deficiency, has been established. Therefore, the guideline members decided these genetic alterations should also be involved. The aim of this revision is to properly carry out testing for BRAF V600E mutation and MMR deficiency in addition to RAS mutation. The revised guidelines include the basic requirements for testing for these genetic alterations based on recent scientific evidence. Furthermore, because clinical utility of comprehensive genetic testing using next-generation sequencing and somatic gene testing of analyzing circulating tumor DNA has increasingly evolved with recent advancements in testing technology, we noted the current situation and prospects for these testing technologies and their clinical implementation in the revised guidelines. © 2018 The Authors. Cancer Science published by John Wiley & Sons Australia, Ltd on behalf of Japanese Cancer Association.

  8. Minority politics in the house of medicine: the physicians forum and the New York County Medical Society, 1938-1965.

    Science.gov (United States)

    Brickman, J P

    1999-01-01

    The late 1930s challenged laissez-faire medicine. Recognition of serious inadequacies in the distribution of medical services stirred activists who questioned fee-for-service delivery and posited a national health program, including health insurance. The AMA and its components--state and county medical societies--counterattacked, mobilizing money and their powerful political arsenal to fight government intrusion in private medicine. The Physicians Forum, initially under the leadership of Ernst P. Boas, emerged as a formidable element within the New York County Medical Society (the largest component of the AMA). The Forum provoked discussion of medical indigence and economics, upsetting the Society leadership with independent candidate slates and telling the public that doctors spoke with more than one voice. For 25 years, the Physicians Forum altered the dynamics of the Medical Society of the County of New York. While the Forum effort to institutionalize minority opinion in the councils of medicine failed, the interchange between County regulars and Forum insurgents broadened the medical reform agenda and moved the County Society in directions that historically it had avoided. Although medical economics formed an unbridgeable chasm between County regulars and rebels, Forum members demonstrated that medicine was not monolithic, that "majority opinion [was not] ... unanimous opinion," and that doctors must speak to issues of medical and social policy.

  9. Medical risk assessment in dentistry: use of the American Society of Anesthesiologists Physical Status Classification.

    Science.gov (United States)

    Clough, S; Shehabi, Z; Morgan, C

    2016-02-12

    Medical risk assessment is essential to safe patient management and the delivery of appropriate dental care. The American Society of Anesthesiologists Physical Status (ASA PS) Classification is widely used within medicine and dentistry, but has received significant criticism. This is the first UK survey to assess the consistency of medical risk assessment in dentistry. (i) To determine the use and consistency of the ASA PS among dentists and anaesthetists. (ii) To consider the appropriateness of the ASA PS in relation to dental treatment planning and delivery of care. A cross-sectional online questionnaire was distributed to anaesthetists and dental practitioners in general practice, community and hospital dental services. Questions focused on professional backgrounds, use of the ASA PS, alternative approaches to risk assessment in everyday practice and scoring of eight hypothetical patients using ASA PS. There were 101 responses, 82 were complete. Anaesthetists recorded ASA PS score more frequently than dental practitioners and found it more useful. Inconsistencies were evident in the assignment of ASA PS scores both between and within professional groups. Many dental practitioners did not use or find ASA PS helpful, with significant inconsistencies in its use. An awareness of alternative assessment scales may be useful across settings. Accepting its limitations, it would be helpful for all dentists to be educated in ASA PS and its use in medical risk assessment, particularly in relation to conscious sedation.

  10. Croatian Society of Medical Biochemistry and Laboratory Medicine: national recommendations for venous blood sampling.

    Science.gov (United States)

    Nikolac, Nora; Supak-Smolcić, Vesna; Simundić, Ana-Maria; Celap, Ivana

    2013-01-01

    Phlebotomy is one of the most complex medical procedures in the diagnosis, management and treatment of patients in healthcare. Since laboratory test results are the basis for a large proportion (60-80%) of medical decisions, any error in the phlebotomy process could have serious consequences. In order to minimize the possibility of errors, phlebotomy procedures should be standardised, well-documented and written instructions should be available at every workstation. Croatia is one of the few European countries that have national guidelines for phlebotomy, besides the universally used CLSI (Clinical Laboratory Standards Institute) H3-A6 Procedures for the Collection of Diagnostic Blood Specimens by Venipuncture; approved Standard-Sixth Edition (CLSI, 2007) and WHO (World Health Organization) guidelines on drawing blood: best practices in phlebotomy (WHO, 2010). However, the growing body of evidence in importance of preanalytical phase management resulted in a need for evidence based revision and expansion of existing recommendations. The Croatian Society for Medical Biochemistry and Laboratory Medicine, Working Group for the Preanalytical Phase issued this recommendation. This document is based on the CLSI guideline H3-A6, with significant differences and additional information.

  11. Twenty years of society of medical informatics of b&h and the journal acta informatica medica.

    Science.gov (United States)

    Masic, Izet

    2012-03-01

    In 2012, Health/Medical informatics profession celebrates five jubilees in Bosnia and Herzegovina: a) Thirty five years from the introduction of the first automatic manipulation of data; b) Twenty five years from establishing Society for Medical Informatics BiH; c) Twenty years from establishing scientific and professional journal of the Society for Medical Informatics of Bosnia and Herzegovina "Acta Informatica Medica"; d) Twenty years from establishing first Cathdra for Medical Informatics on biomedical faculties in Bosnia and Herzegovina and e) Ten years from the introduction of "Distance learning" in medical curriculum. All of the five mentioned activities in the area of Medical informatics had special importance and gave appropriate contribution in the development of Health/Medical informatics in Bosnia And Herzegovina.

  12. Medical error reduction and tort reform through private, contractually-based quality medicine societies.

    Science.gov (United States)

    MacCourt, Duncan; Bernstein, Joseph

    2009-01-01

    physicians cede their implicit "right to remain silent", even if some injured patients will receive less than they do today. Likewise, physicians will be happier with a system that avoids blame-even if this system placed strict requirements for high quality care and disclosure of error. We therefore conceive of de facto trade between patients and physicians, a Pareto improvement, taking form via the establishment of "Societies of Quality Medicine." Physicians working within these societies would consent to onerous processes for disclosing, rectifying and preventing medical error. Patients would in turn contractually agree to assert their claims in arbitration and with limits on recovery. The role of plaintiffs' lawyers would be unchanged, but due to increased disclosure, discovery costs would diminish and the likelihood of prevailing will more than triple. This article examines the legal and policy issues surrounding the establishment of Societies of Quality Medicine, particularly the issues of contracting over liability, and outlines a means of overcoming the theoretical and practical difficulties with enterprise liability, alternative dispute resolution and the imposition of limits on recovery for non-pecuniary damages. We aim to build a welfare enhancing system that rebuffs the culture of silence and promotes error reduction, a system that is at the same time legally sound, fiscally prudent and politically possible.

  13. Review of the Proceedings of the European Society for Medical Oncology (ESMO 2017 Congress

    Directory of Open Access Journals (Sweden)

    A. A. Kirichek

    2017-01-01

    Full Text Available The European Society for Medical Oncology (ESMO Congress in partnership with the European Association for Cancer Research took place between September 8th and 12th of 2017 in Madrid. In 42 years of its existence, the forum has grown from a regional educational meeting in Europe to the main international event in oncology. The key topic of this Congress was integration of molecular biology knowledge with clinical specialties. The ESMO 2017 Congress united almost 24,000 professionals of various fields from 131 countries who submitted 1736 abstracts. More than 50 scientific abstracts which were deemed worthy of special discussion and capable of changing current clinical practice, were separated into a category of late-breaking abstract (LBA. This review highlights some important topics of oncological urology that were discussed at the ESMO 2017 Congress.

  14. Guidelines for biomarker testing in gastroenteropancreatic neuroendocrine neoplasms: a national consensus of the Spanish Society of Pathology and the Spanish Society of Medical Oncology.

    Science.gov (United States)

    García-Carbonero, R; Vilardell, F; Jiménez-Fonseca, P; González-Campora, R; González, E; Cuatrecasas, M; Capdevila, J; Aranda, I; Barriuso, J; Matías-Guiu, X

    2014-03-01

    The annual incidence of neuroendocrine tumours in the Caucasian population ranges from 2.5 to 5 new cases per 100,000 inhabitants. Gastroenteropancreatic neuroendocrine tumours is a family of neoplasms widely variable in terms of anatomical location, hormone composition, clinical syndromes they cause and in their biological behaviour. This high complexity and clinical heterogeneity, together with the known difficulty of predicting their behaviour from their pathological features, are reflected in the many classifications that have been developed over the years in this field. This article reviews the main tissue and clinical biomarkers and makes recommendations for their use in medical practice. This document represents a consensus reached jointly by the Spanish Society of Medical Oncology (SEOM) and the Spanish Society of Pathology (SEAP).

  15. [Action proposals to Japanese Neurological Society from Fukushima Medical University: based on our three years' experiences].

    Science.gov (United States)

    Ugawa, Yoshikazu

    2013-01-01

    In this paper, I make several proposals of what Japanese Neurological Society is able to do or should do in preparing future disaster in Japan. I mention several points separately.Patient education: Patients usually try to visit their hospital as soon as possible for the safety, especially in Japan. Is it true? The traffic jams actually blocked this action in March 11, 2011, which made more serious problems in some patients. We should ask them to prepare matters necessary for staying at home at least for a week when no medical emergency is present.Disaster prevention training: We should make a list of hospitals which accept emergent patients at disaster. We should have some methods of communication still active at disaster (internet, satellite phone) and make society network for communication and patient transportation. How to transfer required drugs to patients is another issue we should consider.Name tag: We sometimes treated unidentified patients in the disaster because the name tag or reference papers was gone or not specified to a certain patient. It is due to great mechanical power of injury or rains. For not detached from the patient and waterproofed, I recommend writing the patient's name on the chest with a permanent marker used in the triathlon when transferring the patients to other hospitals or other places.

  16. [The meaning of "apology": the survivors of Nazi medical crimes and the Max Planck Society].

    Science.gov (United States)

    Sachse, Carola

    2011-09-01

    Around the turn of the twenty-first century a new practice in international politics became established: representatives of political, economic and religious organisations apologised for the historical and political crimes of their own collectives, addressing the victims or the victims' descendants. At a public event in June 2001, a formal apology of this kind was made by the president of the Max Planck Society (MPS), who had previously launched an extensive programme of research into the National Socialist history of what was then the Kaiser Wilhelm Society. The majority of the eight invited survivors of human experimentation in Nazi concentration camps refused forgiveness. Instead, they called for the MPS not to content itself with historical research and analysis, but to ensure the continued remembrance of the victims and their suffering. Starting from this 2001 ritual of repentance, the paper examines the participants' diverse views of how to deal with the medical crimes of National Socialism, and asks about possibilities of going beyond historical retrospection to fulfil the imperative of remembrance.

  17. The American Society for Clinical Pathology's 2014 vacancy survey of medical laboratories in the United States.

    Science.gov (United States)

    Garcia, Edna; Ali, Asma M; Soles, Ryan M; Lewis, D Grace

    2015-09-01

    To determine the extent and distribution of workforce shortages within the nation's medical laboratories. Historically, the results of this biennial survey have served as a basis for additional research on laboratory recruitment, retention, education, marketing, certification, and advocacy. The 2014 Vacancy Survey was conducted through collaboration between American Society for Clinical Pathology's Institute of Science, Technology, and Policy in Washington, DC, and the Evaluation, Measurement, and Assessment Department and Board of Certification in Chicago, Illinois. Data were collected via an Internet survey that was distributed to individuals who were able to report on staffing and certifications for their laboratories. Data reveal increased overall vacancy rates since 2012 for all departments surveyed except cytology and cytogenetics. Also, results show higher anticipated retirement rates for both staff and supervisors. Overall certification rates are highest among laboratory personnel in cytogenetics, hematology/coagulation, and flow cytometry departments and lowest among phlebotomy, specimen processing, and anatomic pathology. Factors such as retirement and the improving economy are driving the need for more laboratory professionals. Recruitment of qualified laboratory professionals in the workforce and students in laboratory programs will be the key in fulfilling the higher vacancies revealed from the survey results in 2014. Copyright© by the American Society for Clinical Pathology.

  18. Where Are the Women? The Underrepresentation of Women Physicians Among Recognition Award Recipients From Medical Specialty Societies.

    Science.gov (United States)

    Silver, Julie K; Slocum, Chloe S; Bank, Anna M; Bhatnagar, Saurabha; Blauwet, Cheri A; Poorman, Julie A; Villablanca, Amparo; Parangi, Sareh

    2017-08-01

    Membership in medical societies is associated with a number of benefits to members that may include professional education, opportunities to present research, scientific and/or leadership training, networking, and others. In this perspective article, the authors address the value that medical specialty society membership and inclusion have in the development of an academic physician's career and how underrepresentation of women may pose barriers to their career advancement. Because society membership itself is not likely sufficient to support the advancement of academic physicians, this report focuses on one key component of advancement that also can be used as a measure of inclusion in society activities-the representation of women physicians among recipients of recognition awards. Previous reports demonstrated underrepresentation of women physicians among recognition award recipients from 2 physical medicine and rehabilitation specialty organizations, including examples of zero or near-zero results. This report investigated whether zero or near-zero representation of women physicians among recognition award recipients from medical specialty societies extended beyond the field of physical medicine and rehabilitation. Examples of the underrepresentation of women physicians, as compared with their presence in the respective field, was found across a range of additional specialties, including dermatology, neurology, anesthesiology, orthopedic surgery, head and neck surgery, and plastic surgery. The authors propose a call for action across the entire spectrum of medical specialty societies to: (1) examine gender diversity and inclusion data through the lens of the organization's mission, values, and culture; (2) transparently report the results to members and other stakeholders including medical schools and academic medical centers; (3) investigate potential causes of less than proportionate representation of women; (4) implement strategies designed to improve

  19. Converting Scoliosis Research Society-24 to Scoliosis Research Society-22r in a Surgical-Range, Medical/Interventional Adolescent Idiopathic Scoliosis Patient Cohort.

    Science.gov (United States)

    Chen, Antonia F; Bi, Wenzhu; Singhabahu, Dilrukshika; Londino, Joanne; Hohl, Justin; Ward, Maeve; Ward, W Timothy

    2013-03-01

    Prospective questionnaire administration study. To assess the ability to translate total and domain scores from Scoliosis Research Society (SRS)-24 to SRS-22r in a surgical-range, medical/interventional adolescent idiopathic scoliosis (AIS) patient population. Conversion of SRS-24 to SRS-22r is demonstrated in an operative cohort of patients with AIS, but not in a medical/interventional patient population. We simultaneously administered SRS-24 and SRS-22r questionnaires to 75 surgical-range, medical/interventional AIS patients and compared them. We performed analysis by regression modeling to produce conversion equations from SRS-24 to SRS-22r. The total SRS-24 score for these medical/interventional AIS patients was 92.5 ± 9.45 (mean, 3.9 ± 0.39), and the total SRS-22r score was 93.5 ± 9.63 (mean, 4.3 ± 0.44). The correlation between these 2 groups was fair (R 2 = 0.77) and improved to good when mental health or recall questions were removed. The correlation was also fair for total pain domains (R 2 = 0.73). However, there was poor correlation for general self-image (R 2 = 0.6) and unacceptable for post-treatment self-image (R 2 = 0.01), general function (R 2 = 0.52), activity function (R 2 = 0.56), and satisfaction (R 2 = 0.53). Compared with a published population of operative AIS patients, R 2 values for total SRS-24 scores, pain, general self-image, activity function, and satisfaction were similar (p > .05). The R 2 values for general function and combined general and activity function were significantly different between the operative and medical/interventional cohorts. Scoliosis Research Society-24 can be converted to SRS-22r scores with fair accuracy in the surgical-range, medical/interventional AIS patient population for total score, and total pain domains. The SRS-24 translates unacceptably to the SRS-22r in self-image, function, and satisfaction domains. The SRS-24 to SRS-22r conversion equations are similar to operative AIS patients, except for the

  20. Review of Medical Advisory Services by the Korean Society of Pathologists from 2003 to 2014

    Directory of Open Access Journals (Sweden)

    Min Hye Jang

    2016-01-01

    Full Text Available Background: Since 2003, the Korean Society of Pathologists (KSP has been officially providing medical advisory services (MAS. We reviewed the cases submitted to the KSP between 2003 and 2014. Methods: In total, 1,950 cases were submitted, most by private health insurance companies. The main purposes of the consultations were to clarify the initial diagnoses and to assign a proper disease classification code. We comprehensively reviewed 1,803 consultation cases with detailed information. Results: In spite of some fluctuations, the number of submitted cases has been significantly increasing over the 12 study years. The colon and rectum (40.3%, urinary bladder (14.2%, and stomach (6.9% were the three most common tissues of origin. The most common diagnoses for each of the three tissues of origin were neuroendocrine tumor (50.7%, non-invasive papillary urothelial carcinoma (70.7%, and adenocarcinoma (36.2%. Regardless of the tissue of origin, neuroendocrine tumor of the digestive system was the most common diagnosis (419 of 1,803. Conclusions: In the current study, we found that pathologic consultations associated with private health insurance accounted for a large proportion of the MAS. Coding of the biologic behavior of diseases was the main issue of the consultations. In spite of the effort of the KSP to set proper guidelines for coding and classification of tumors, this review revealed that problems still exist and will continue to be an important issue.

  1. Surface modifications of aero-bearings

    International Nuclear Information System (INIS)

    Wang Yirong; Chen Jin; Nie Gao; Lu Haolin; Yang Qifa; Xu Qiu; Wang Peilu; Chen Yuanru; Liu Zhongyang

    1988-01-01

    Different ion beam techniques, i.e. ion beam mixing and ion implantation by either single or multi-element ions, were adopted to modify surface properties of aero-bearing samples that were made of GCr15 or Cr4Mo4V alloys, Results showed that corrosion behaviour and wear resistance of the samples treated with any of the techniques were improved significantly

  2. Cancer chemotherapy of the upper aero digestive tract

    International Nuclear Information System (INIS)

    Vedrine, L.; Chargari, C.; Le Moulec, S.; Fayolle, M.; Ceccaldi, B.; Bauduceau, O.

    2008-01-01

    Tumours of the upper aero digestive tract represent the sixth most frequent kind of cancer in France and throughout the world. If the localised forms may be controlled in the long run in two thirds of cases by surgery or radiotherapy, only one third of locally advanced forms are accessible to a cure after association from radiotherapy and chemotherapy. Besides, with a median of survival less than six months, metastatic tumours present a catastrophic spontaneous prognosis among patients with a medical ground that is often heavily deteriorated by prolonged exposure to alcohol and tobacco. Thus, there is a necessity to implement adapted therapeutic strategies to each patient and based on satisfactory proof levels of effectiveness. Optimisation of existing chemotherapy protocols and development of new therapies, in particular of targeted therapies, remain an important objective in the hope to improve results of treatments in locally advanced and metastatic cancers of the oral cavity. (authors)

  3. Apology, responsibility, memory. Coming to terms with Nazi medical crimes: the example of the Max Planck Society.

    Science.gov (United States)

    Sachse, Carola

    2011-11-01

    In June 2001, the then president of the Max Planck Society addressed a formal apology to survivors of Nazi medical crimes. Starting from this ritual of repentance, the paper examines the participants' diverse views of how to deal with the medical crimes of National Socialism. In comparison with the DGPPN, it asks about possibilities of going beyond historical retrospection to fulfil the imperative of remembrance.

  4. The integration of acupuncture within medicine in the UK--the British Medical Acupuncture Society's 25th anniversary.

    Science.gov (United States)

    Baldry, Peter

    2005-03-01

    Acupuncture was first used in China, probable about 2000 years ago. When acupuncture first arrived in the West in the 17th century, the principles which the Chinese had used to explain its actions were at variance with current scientific knowledge of the body's structure and function. This led to the rejection of acupuncture by the medical profession in the UK, although individual practitioners adopted it with enthusiasm, usually needling the point of maximal tenderness to treat musculoskeletal pain. Acupuncture was more generally accepted in France and Germany, where the pioneering British physician Felix Mann encountered it in the 1950s. He then taught acupuncture to other medical practitioners and organised regular meetings in London, from which the British Medical Acupuncture Society, BMAS, emerged in 1980. The tradition of biannual scientific meetings has continued since then. The Society has many connections with prominent acupuncturists internationally and is a founder member of the International Council of Medical Acupuncture and Related Techniques (ICMART), and has hosted two world congresses. The Society was involved in standardisation of the meridian nomenclature published in 1990. The Society's scientific journal, Acupuncture in Medicine, was founded in 1981 and has gained international recognition, being indexed on several databases. The Society has established regular teaching courses at different levels, which lead to professional qualifications of Certificate and Diploma. The membership is now open to different health professionals, has grown steadily and now stands at nearly 2500. The Society is administered from offices in Cheshire and London. Many individual members have contributed to the Society's characteristic Western 'medical' approach to acupuncture in which needling is seen as a form of neuromuscular stimulation that owes little to traditional meridians or points. The Society has shown a particular interest in acupuncture for myofascial

  5. Medical oncology future plan of the Spanish Society of Medical Oncology: challenges and future needs of the Spanish oncologists.

    Science.gov (United States)

    Rivera, F; Andres, R; Felip, E; Garcia-Campelo, R; Lianes, P; Llombart, A; Piera, J M; Puente, J; Rodriguez, C A; Vera, R; Virizuela, J A; Martin, M; Garrido, P

    2017-04-01

    The SEOM Future Plan is aimed at identifying the main challenges, trends and needs of the medical oncology speciality over the next years, including potential oncologist workforce shortages, and proposing recommendations to overcome them. The estimations of the required medical oncologists workforce are based on an updated Medical Oncologist Register in Spain, Medical Oncology Departments activity data, dedication times and projected cancer incidence. Challenges, needs and future recommendations were drawn from an opinion survey and an advisory board. A shortage of 211 FTE medical oncologist specialists has been established. To maintain an optimal ratio of 158 new cases/FTE, medical oncology workforce should reach 1881 FTE by 2035. Main recommendations to face the growing demand and complexity of oncology services include a yearly growth of 2.5% of medical oncologist's workforce until 2035, and development and application of more accurate quality indicators for cancer care and health outcomes measure.

  6. The current and future role of the medical oncologist in the professional care for cancer patients: a position paper by the European Society for Medical Oncology (ESMO).

    Science.gov (United States)

    Popescu, R A; Schäfer, R; Califano, R; Eckert, R; Coleman, R; Douillard, J-Y; Cervantes, A; Casali, P G; Sessa, C; Van Cutsem, E; de Vries, E; Pavlidis, N; Fumasoli, K; Wörmann, B; Samonigg, H; Cascinu, S; Cruz Hernández, J J; Howard, A J; Ciardiello, F; Stahel, R A; Piccart, M

    2014-01-01

    The number of cancer patients in Europe is rising and significant advances in basic and applied cancer research are making the provision of optimal care more challenging. The concept of cancer as a systemic, highly heterogeneous and complex disease has increased the awareness that quality cancer care should be provided by a multidisciplinary team (MDT) of highly qualified healthcare professionals. Cancer patients also have the right to benefit from medical progress by receiving optimal treatment from adequately trained and highly skilled medical professionals. Built on the highest standards of professional training and continuing medical education, medical oncology is recognised as an independent medical specialty in many European countries. Medical oncology is a core member of the MDT and offers cancer patients a comprehensive and systemic approach to treatment and care, while ensuring evidence-based, safe and cost-effective use of cancer drugs and preserving the quality of life of cancer patients through the entire 'cancer journey'. Medical oncologists are also engaged in clinical and translational research to promote innovation and new therapies and they contribute to cancer diagnosis, prevention and research, making a difference for patients in a dynamic, stimulating professional environment. Medical oncologists play an important role in shaping the future of healthcare through innovation and are also actively involved at the political level to ensure a maximum contribution of the profession to Society and to tackle future challenges. This position paper summarises the multifarious and vital contributions of medical oncology and medical oncologists to today's and tomorrow's professional cancer care.

  7. Common indoor and outdoor aero-allergens in South Africa

    African Journals Online (AJOL)

    Aero-allergens in South Africa that are also encountered around the world are listed in Table I. In addition to this wide range of common aero-allergens, South Africans are also exposed to a full range of food allergens, some of which, e.g. perlemoen (Haliotis midae) and other seafood allergens, are unique to this region.

  8. THE TREATMENT OF AERO-OTITIS MEDIA BY REDECOMPRESSION,

    Science.gov (United States)

    The precipitating event preceding the appearance of aero- otitis media is the development of a relative vacuum within the middle ear. The aim of...obtaining normal pressure relationships between the middle ear and the environment. In 27 of a group of 33 men with severe aero- otitis media , this

  9. Comparison of caffeine disposition following administration by oral solution (energy drink) and inspired powder (AeroShot) in human subjects.

    Science.gov (United States)

    Laizure, S Casey; Meibohm, Bernd; Nelson, Kembral; Chen, Feng; Hu, Zhe-Yi; Parker, Robert B

    2017-12-01

    To determine the disposition and effects of caffeine after administration using a new dosage form (AeroShot) that delivers caffeine by inspiration of a fine powder into the oral cavity and compare it to an equivalent dose of an oral solution (energy drink) as the reference standard. Healthy human subjects (n = 17) inspired a 100 mg caffeine dose using the AeroShot device or consumed an energy drink on separate study days. Heart rate, blood pressure and subject assessments of effects were measured over an 8-h period. Plasma concentrations of caffeine and its major metabolites were determined by liquid chromatography-mass spectrometry. Pharmacokinetic, cardiovascular and perceived stimulant effects were compared between AeroShot and energy drink phases using a paired t test and standard bioequivalency analysis. Caffeine disposition was similar after caffeine administration by the AeroShot device and energy drink: peak plasma concentration 1790 and 1939 ng ml -1 , and area under the concentration-time curve (AUC) 15 579 and 17 569 ng ml -1 × h, respectively, but they were not bioequivalent: AeroShot AUC of 80.3% (confidence interval 71.2-104.7%) and peak plasma concentration of 86.3% (confidence interval 62.8-102.8%) compared to the energy drink. Female subjects did have a significantly larger AUC compared to males after consumption of the energy drink. The heart rate and blood pressure were not significantly affected by the 100 mg caffeine dose, and there were no consistently perceived stimulant effects by the subjects using visual analogue scales. Inspiration of caffeine as a fine powder using the AeroShot device produces a similar caffeine profile and effects compared to administration of an oral solution (energy drink). © 2017 The British Pharmacological Society.

  10. Advanced technology for aero gas turbine components

    Energy Technology Data Exchange (ETDEWEB)

    1987-09-01

    The Symposium is aimed at highlighting the development of advanced components for new aero gas turbine propulsion systems in order to provide engineers and scientists with a forum to discuss recent progress in these technologies and to identify requirements for future research. Axial flow compressors, the operation of gas turbine engines in dust laden atmospheres, turbine engine design, blade cooling, unsteady gas flow through the stator and rotor of a turbomachine, gear systems for advanced turboprops, transonic blade design and the development of a plenum chamber burner system for an advanced VTOL engine are among the topics discussed.

  11. Proceedings from the 9th Annual Meeting of International Society for Medical Publication Professionals Roundtable Session: key insights.

    Science.gov (United States)

    Simcoe, Donna; Juneja, Renu; Scott, Gayle Nicholas; Sridharan, Kanaka; Williams-Hughes, Celeste

    2014-03-01

    During the 9th Annual Meeting of the International Society for Medical Publication Professionals (ISMPP, April 29-May 1, 2013 in Baltimore, MD), ∼650 participants attended two of 13 available roundtable sessions. Participants included medical publication professionals from industry, communication agencies, and journals. DISCUSSION TOPICS: Roundtable participants discussed how to best interpret and implement various guidances, such as Good Publication Practices 2 (GPP2), the International Committee of Medical Journal Editors (ICMJE) guidelines, and the Physician Payment Sunshine Act. The impact of and compliance with Corporate Integrity agreements (CIAs) on medical publication planning practices was debated. Roundtable participants also discussed ways of advancing both advocacy for the medical publication professional field and internal and external collaborations. The development of review manuscripts, publications from regions newly emerging in publication planning, medical devices publications, and real-world experience publications were discussed. Participants also considered the benefits and uncertainties of new technologies in medical publications such as multimedia and social media. This is the first ever article to be published following the well-attended ISMPP roundtable sessions. The objective of this manuscript is to summarize key learnings that will aid continued discussions about challenges and opportunities facing medical publication professionals.

  12. Aero and vibroacoustics of automotive turbochargers

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen-Schaefer, Hung [Bosch Mahle Turbo Systems GmbH, Stuttgart (Germany)

    2013-02-01

    First book about the aeroacoustics of automotive turbochargers. Author of the book ''Rotordynamics of Automotive Turbochargers'', Springer, 2012. Written by an R and D expert in the turbocharger industry. Aero and Vibroacoustics of Automotive Turbochargers is a topic involving aspects from the working fields of thermodynamics of turbomachinery, aerodynamics, rotordynamics, and noise propagation computation. In this broadly interdisciplinary subject, thermodynamics of turbomachinery is used to design the turbocharger and to determine its operating conditions. Aerodynamics is needed to study the compressor flow dynamics and flow instabilities of rotating stall and surge, which can produce growling and whining-type noises. Rotordynamics is necessary to study rotor unbalance and self-excited oil-whirl instabilities, which lead to whistling and constant tone-type noises in rotating floating oil-film type bearings. For the special case of turbochargers using ball bearings, some high-order harmonic and wear noises also manifest in the rotor operating range. Lastly, noise propagation computation, based on Lighthill's analogy, is required to investigate airborne noises produced by turbochargers in passenger vehicles. The content of this book is intended for advanced undergraduates, graduates in mechanical engineering, research scientists and practicing engineers who want to better understand the interactions between these working fields and the resulting impact on the interesting topic of Aero and Vibroacoustics of Automotive Turbochargers.

  13. Aero-Assisted Pre-Stage for Ballistic and Aero-Assisted Launch Vehicles

    Science.gov (United States)

    Ustinov, Eugene A.

    2012-01-01

    A concept of an aero-assisted pre-stage is proposed, which enables launch of both ballistic and aero-assisted launch vehicles from conventional runways. The pre-stage can be implemented as a delta-wing with a suitable undercarriage, which is mated with the launch vehicle, so that their flight directions are coaligned. The ample wing area of the pre-stage combined with the thrust of the launch vehicle ensure prompt roll-out and take-off of the stack at airspeeds typical for a conventional jet airliner. The launch vehicle is separated from the pre-stage as soon as safe altitude is achieved, and the desired ascent trajectory is reached. Nominally, the pre-stage is non-powered. As an option, to save the propellant of the launch vehicle, the pre-stage may have its own short-burn propulsion system, whereas the propulsion system of the launch vehicle is activated at the separation point. A general non-dimensional analysis of performance of the pre-stage from roll-out to separation is carried out and applications to existing ballistic launch vehicle and hypothetical aero-assisted vehicles (spaceplanes) are considered.

  14. Aero and vibroacoustics of automotive turbochargers

    CERN Document Server

    Nguyen-Schäfer, Hung

    2013-01-01

    Aero and Vibroacoustics of Automotive Turbochargers is a topic involving aspects from the working fields of thermodynamics of turbomachinery, aerodynamics, rotordynamics, and noise propagation computation.   In this broadly interdisciplinary subject, thermodynamics of turbomachinery is used to design the turbocharger and to determine its operating conditions.  Aerodynamics is needed to study the compressor flow dynamics and flow instabilities of rotating stall and surge, which can produce growling and whining-type noises. Rotordynamics is necessary to study rotor unbalance and self-excited oil-whirl instabilities, which lead to whistling and constant tone-type noises in rotating floating oil-film type bearings. For the special case of turbochargers using ball bearings, some high-order harmonic and wear noises also manifest in the rotor operating range. Lastly, noise propagation computation, based on Lighthill’s analogy, is required to investigate airborne noises produced by turbochargers in passenger vehi...

  15. The future of continuing medical education: the roles of medical professional societies and the health care industry: Position paper prepared with contributions from the European Society of Cardiology Committees for Advocacy, Education and Industry Relations, Endorsed by the Board of the European Society of Cardiology.

    Science.gov (United States)

    2018-02-28

    In recent years, wide ranging biomedical innovation has provided powerful new approaches for prevention, diagnosis and management of diseases. In order to translate such innovation into effective practice, physicians must frequently update their knowledge base and skills through continuing medical education and training. Medical Professional Societies, run as not-for-profit organizations led by peers, are uniquely placed to deliver balanced, disease oriented and patient centred education. The medical industry has a major role in the development of new, improved technology, devices and medication. In fact, the best innovations have been achieved through collaboration with scientists, clinical academics and practicing physicians. Industry has for many years been committed to ensure the optimal and safe application of its products by providing unrestricted support of medical education developed and delivered by international and national learned societies. Recently adopted Codes of Practice for the Pharmaceutical and Device industry were intended to enhance public trust in the relationship between biomedical industry and physicians. Unexpectedly, changes resulting from adoption of the Codes have limited the opportunity for unconditional industry support of balanced medical education in favour of a more direct involvement of industry in informing physicians about their products. We describe the need for continuing medical education in Cardiovascular Medicine in Europe, interaction between the medical profession and medical industry, and propose measures to safeguard the provision of high quality, balanced medical education.

  16. Enhancement, ethics and society: towards an empirical research agenda for the medical humanities and social sciences.

    Science.gov (United States)

    Pickersgill, Martyn; Hogle, Linda

    2015-12-01

    For some time now, bioethicists have paid close attention to issues associated with 'enhancement'; specifically, the appropriate use and regulation of substances and artefacts understood by some to improve the functioning of human bodies beyond that associated with 'normal' function. Medical humanities scholars (aside from philosophers and lawyers) and social scientists have not been frequent participants in debates around enhancement, but could shine a bright light on the range of dilemmas and opportunities techniques of enhancement are purported to introduce. In this paper, we argue that empirical research into the notion and practice of enhancement is necessary and timely. Such work could fruitfully engage with-and further develop-existing conceptual repertoires within the medical humanities and social sciences in ways that would afford benefit to scholars in those disciplines. We maintain that empirical engagements could also provide important resources to bioethicists seeking to regulate new enhancements in ways that are sensitive to societal context and cultural difference. To this end, we outline an empirical agenda for the medical humanities and social sciences around enhancement, emphasising especially how science and technology studies could bring benefits to-and be benefitted by-research in this area. We also use the example of (pharmaceutical) cognitive enhancement to show how empirical studies of actual and likely enhancement practices can nuance resonant bioethical debates. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  17. The American Society for Clinical Pathology's 2015 Wage Survey of Medical Laboratories in the United States.

    Science.gov (United States)

    Garcia, Edna; Fisher, Patrick B

    2017-05-01

    To inform the pathology and laboratory field of the most recent national wage data from the American Society for Clinical Pathology (ASCP). Historically, the results of this biennial survey have served as a basis for additional research on laboratory recruitment, retention, education, marketing, certification, and advocacy. The 2015 wage survey was conducted through collaboration between the ASCP's Institute of Science, Technology, and Policy in Washington, DC, and the ASCP Board of Certification in Chicago, Illinois. Electronic survey invitations were sent to individuals who are currently practicing in the field. Data reveal increased salaries since 2013 for all staff-level laboratory professionals surveyed except phlebotomists and pathologists' assistants. Laboratory assistants and phlebotomists, regardless of level, continue to have lower salaries while pathologists' assistants and administration personnel have higher salaries than the rest of the laboratory professions surveyed. Survey results put emphasis on strategic recruitment and retention by laboratory training programs and institutions that hire laboratory professionals. © American Society for Clinical Pathology, 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  18. MEMS and mil/aero: technology push and market pull

    Science.gov (United States)

    Clifford, Thomas H.

    2001-04-01

    MEMS offers attractive solutions to high-density fluidics, inertial, optical, switching and other demanding military/aerospace (mil/aero) challenges. However, full acceptance must confront the realities of production-scale producibility, verifiability, testability, survivability, as well as long-term reliability. Data on these `..ilities' are crucial, and are central in funding and deployment decisions. Similarly, mil/aero users must highlight specific missions, environmental exposures, and procurement issues, as well as the quirks of its designers. These issues are particularly challenging in MEMS, because of the laws of physics and business economics, as well as the risks of deploying leading-edge technology into no-fail applications. This paper highlights mil/aero requirements, and suggests reliability/qualification protocols, to guide development effort and to reassure mil/aero users that MEMS labs are mindful of the necessary realities.

  19. Generic methods for aero-engine exhaust emission prediction

    NARCIS (Netherlands)

    Shakariyants, S.A.

    2008-01-01

    In the thesis, generic methods have been developed for aero-engine combustor performance, combustion chemistry, as well as airplane aerodynamics, airplane and engine performance. These methods specifically aim to support diverse emission prediction studies coupled with airplane and engine

  20. Aeronautical Mobile Airport Communications System (AeroMACS)

    Science.gov (United States)

    Budinger, James M.; Hall, Edward

    2011-01-01

    To help increase the capacity and efficiency of the nation s airports, a secure wideband wireless communications system is proposed for use on the airport surface. This paper provides an overview of the research and development process for the Aeronautical Mobile Airport Communications System (AeroMACS). AeroMACS is based on a specific commercial profile of the Institute of Electrical and Electronics Engineers (IEEE) 802.16 standard known as Wireless Worldwide Interoperability for Microwave Access or WiMAX (WiMax Forum). The paper includes background on the need for global interoperability in air/ground data communications, describes potential AeroMACS applications, addresses allocated frequency spectrum constraints, summarizes the international standardization process, and provides findings and recommendations from the world s first AeroMACS prototype implemented in Cleveland, Ohio, USA.

  1. Symposium 'Methodology in Medical Education Research' organised by the Methodology in Medical Education Research Committee of the German Society of Medical Education May, 25th to 26th 2013 at Charité, Berlin.

    Science.gov (United States)

    Schüttpelz-Brauns, Katrin; Kiessling, Claudia; Ahlers, Olaf; Hautz, Wolf E

    2015-01-01

    In 2013, the Methodology in Medical Education Research Committee ran a symposium on "Research in Medical Education" as part of its ongoing faculty development activities. The symposium aimed to introduce to participants educational research methods with a specific focus on research in medical education. Thirty-five participants were able to choose from workshops covering qualitative methods, quantitative methods and scientific writing throughout the one and a half days. The symposium's evaluation showed participant satisfaction with the format as well as suggestions for future improvement. Consequently, the committee will offer the symposium again in a modified form in proximity to the next annual Congress of the German Society of Medical Education.

  2. 46. Annual meeting of the German Society for Medical Physics. Abstracts; 46. Jahrestagung der Deutschen Gesellschaft fuer Medizinische Physik. Abstractband

    Energy Technology Data Exchange (ETDEWEB)

    Fiebich, Martin [Technische Hochschule Mittelhessen, Giessen (Germany). Inst. fuer Medizinische Physik und Strahlenschutz; Zink, Klemens (ed.) [Technische Hochschule Mittelhessen, Giessen (Germany). Inst. fuer Medizinische Physik und Strahlenschutz; Universitaetsklinikum Giessen-Marburg, Marburg (Germany). Klinik fuer Strahlentherapie und Radioonkologie

    2015-07-01

    The abstracts volume of the 46th annual meeting of the German Society for Medical Physics includes abstracts on the following issues: audiology; particle therapy: dosimetric and biological aspects; functional and molecular imaging; computerized tomography; dosimetry: 2D dosimetry and clinical dosimetry; MR imaging: cardio and lungs imaging; quality assurance in radiation therapy; brachytherapy/IORT; irradiation planning; functional and molecular imaging: methodic principles; dosimetry: dosimetric base data and Monte Carlo; adaptive and guided radiation therapy; irradiation planning; laser accelerated protons; brachytherapy/IORT: dosimetry; particle therapy: irradiation planning and imaging; stereotaxis and radiosurgery; radiation protection; dosimetry: detectors and small photon fields; MRT and MRS - neuroimaging; particle therapy: in vivo verification.

  3. Fertility preservation for medical reasons in girls and women: British fertility society policy and practice guideline.

    Science.gov (United States)

    Yasmin, Ephia; Balachandren, Neerujah; Davies, Melanie C; Jones, Georgina L; Lane, Sheila; Mathur, Raj; Webber, Lisa; Anderson, Richard A

    2018-04-01

    Fertility preservation in the female poses several challenges due to the invasive nature of the techniques available to achieve it. The guideline aims to bring together the evidence available for the measures for fertility preservation and their outcome. The guideline addresses fertility preservation for medical reasons and includes both oncological and non-oncological causes. The techniques that the guideline considers are: (i) embryo and oocyte cryopreservation; (ii) ovarian tissue cryopreservation; (iii) GnRH agonist suppression and (iv) ovarian transposition. Although ovarian tissue cryopreservation is still considered experimental, the availability of this technique is gaining momentum as more live births from auto-transplanted tissue are reported. The guideline also highlights use of current treatment modalities for benign and malignant conditions that have a better fertility sparing profile. The guideline recommends a multidisciplinary approach in counselling women and girls about the risk to their fertility and available techniques. The role of psychological support in assisting women and girls with decision-making is highlighted. The guideline also highlights the risks associated with these techniques. Women need to be medically fit to undergo invasive procedures. Fertility preservation techniques are appropriate when treatment has curative intent. Fertility preservation is a subject of on-going research on outcomes of different techniques and at the time of publication, studies are still likely to emerge adding to the available literature.

  4. Wilderness Medical Society practice guidelines for the use of epinephrine in outdoor education and wilderness settings: 2014 update.

    Science.gov (United States)

    Gaudio, Flavio G; Lemery, Jay; Johnson, David E

    2014-12-01

    The Epinephrine Roundtable took place on July 27, 2008, during the 25th Annual Meeting of the Wilderness Medical Society (WMS) in Snowmass, CO. The WMS convened this roundtable to explore areas of consensus and uncertainty in the field treatment of anaphylaxis. Panelists were selected on the basis of their relevant academic or professional experience. There is a paucity of data that address the treatment of anaphylaxis in the wilderness. Anaphylaxis is a rare disease, with a sudden onset and drastic course that does not lend itself to study in randomized, controlled trials. Therefore, the panel endorsed the following position based on the limited available evidence and review of published articles, as well as expert consensus. The position represents the consensus of the panelists and is endorsed by the WMS. In 2014, the authors reviewed relevant articles published since the Epinephrine Roundtable. The following is an updated version of the original guidelines published in Wilderness & Environmental Medicine 2010;21(4):185-187. Copyright © 2014 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

  5. Addressing the nation's physician workforce needs: The Society of General Internal Medicine (SGIM) recommendations on graduate medical education reform.

    Science.gov (United States)

    Jackson, Angela; Baron, Robert B; Jaeger, Jeffrey; Liebow, Mark; Plews-Ogan, Margaret; Schwartz, Mark D

    2014-11-01

    The Graduate Medical Education (GME) system in the United States (US) has garnered worldwide respect, graduating over 25,000 new physicians from over 8,000 residency and fellowship programs annually. GME is the portal of entry to medical practice and licensure in the US, and the pathway through which resident physicians develop the competence to practice independently and further develop their career plans. The number and specialty distribution of available GME positions shapes the overall composition of our national workforce; however, GME is failing to provide appropriate programs that support the delivery of our society's system of healthcare. This paper, prepared by the Health Policy Education Subcommittee of the Society of General Internal Medicine (SGIM) and unanimously endorsed by SGIM's Council, outlines a set of recommendations on how to reform the GME system to best prepare a physician workforce that can provide high quality, high value, population-based, and patient-centered health care, aligned with the dynamic needs of our nation's healthcare delivery system. These recommendations include: accurate workforce needs assessment, broadened GME funding sources, increased transparency of the use of GME dollars, and implementation of incentives to increase the accountability of GME-funded programs for the preparation and specialty selection of their program graduates.

  6. Quality management of clinical-practical instruction for Practical Year medical students in Germany - proposal for a catalogue of criteria from the German Society of Medical Education.

    Science.gov (United States)

    Raes, Patricia; Angstwurm, Matthias; Berberat, Pascal; Kadmon, Martina; Rotgans, Jerome; Streitlein-Böhme, Irmgard; Burckhardt, Gerhard; Fischer, Martin R

    2014-01-01

    Amended in 2013, the current version of the German Medical Licensure Regulation contains structural specifications that are also required of non-university institutions involved in Practical Year clinical training. The criteria are worded in relatively general terms. Furthermore, not all of the structural specifications can be readily applied to every subject area. In order to ensure commensurability in Practical Year instruction in Germany, not least in light of recently introduced Practical Year mobility, it is necessary to define consistent quality criteria for Practical Year training. The authors therefore propose a catalogue of criteria for the quality management process in Practical Year instruction facilities. In January 2014, the board of directors of the German Society for Medical Education decided to establish a committee comprised of representatives from various German medical faculties. In a process similar to the Delphi methodology, the group developed criteria for structure, process and outcome quality in Practical Year training in Germany. The criteria developed for structure, process and outcome quality apply to Practical Year training in academic teaching hospitals and university medical centres. Furthermore, modalities for review are proposed. The present catalogue of criteria is intended to contribute to the formation of a basis for the most consistent quality standards possible for Practical Year instruction in Germany.

  7. Relations between professional medical associations and healthcare industry, concerning scientific communication and continuing medical education: a policy statement from the European Society of Cardiology.

    Science.gov (United States)

    2012-01-01

    Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry. Copyright © 2012. Published by Elsevier España.

  8. Relations between professional medical associations and the health-care industry, concerning scientific communication and continuing medical education: a policy statement from the European Society of Cardiology.

    Science.gov (United States)

    2012-06-01

    Physicians have an ethical duty to keep up-to-date with current knowledge. Professional medical associations such as the European Society of Cardiology (ESC) support these obligations. In Europe, the costs of continuing medical education (CME) are insufficiently supported from governments and employers; however, medical associations have been criticized for accepting alternative financial support from industry. Medical education and training in research include learning how to assess the quality and reliability of any information. There is some risk of bias in any form of scientific communication including intellectual, professional, and financial and it is essential that in particular, the latter must be acknowledged by full disclosure. It is essential that there is strong collaboration between basic and clinical researchers from academic institutions on the one hand, with engineers and scientists from the research divisions of device and pharmaceutical companies on the other. This is vital so that new diagnostic methods and treatments are developed. Promotion of advances by industry may accelerate their implementation into clinical practice. Universities now frequently exhort their academic staff to protect their intellectual property or commercialize their research. Thus, it is not commercial activity or links per se that have become the target for criticism but the perceived influence of commercial enterprises on clinical decision-making or on messages conveyed by professional medical organizations. This document offers the perspective of the ESC on the current debate, and it recommends how to minimize bias in scientific communications and CME and how to ensure proper ethical standards and transparency in relations between the medical profession and industry.

  9. Catalogue of learning goals for pregraduate education in geriatric medicine. A recommendation of the German Geriatric Society (DGG), the German Society of Gerontology and Geriatrics (DGGG), the Austrian Society of Geriatrics and Gerontology (OGGG) and the Swiss Society of Geriatric Medicine (SFGG) on the basis of recommendations of the European Union of Medical Specialists Geriatric Medicine Section (UEMS-GMS) 2013

    DEFF Research Database (Denmark)

    Singler, K.; Stuck, A. E.; Masud, T.

    2014-01-01

    using a modified Delphi technique in order to encourage education in this field. This catalogue of learning objectives for geriatric medicine focuses on the minimum requirements with specific learning goals in knowledge, skills and attitudes that medical students should have acquired by the end...... at German-speaking medical faculties and universities of Austria, Germany and Switzerland. This article contains the final German translation of the curriculum. The Geriatric Medicine Societies of Germany, Austria, and Switzerland formally endorse the present curriculum and recommend that medical faculties...

  10. [Jubilees of the Serbian Medical Society. Golden jubilee--a time of renewal and remembrance].

    Science.gov (United States)

    Vuković, Z

    1998-01-01

    The Serbian medical association was founded in Belgrade 125 years ago. At that time, Serbia was liberated from the Ottoman domination, and was one of some thirty existing independent states gaining international recognition in 1878. The physicians of the Serbian medical association have shared the fate of their people over the past 125 years. This is best illustrated by the fact that Serbia lost more than 1,000,000 people in World War I and that every third doctor in Serbia lost his life serving his people during the war. This was the highest expression of philanthropy, unsurpassed in the history of mankind. The period of time after the war, was the time of renewal and commemoration. In that time John Maynard Keynes, one of the most outstanding figures in the field of world economics, was on the Peace Conference in Paris, after the World War I, in charge of estimating war damages and the degree of destruction in the Allied countries, but without considering their losses in "human capital"-- the only exception he made for Serbia. In his book "The Economic Consequences of the Peace (published in 1920) he wrote: "The losses of Serbia, although from a human point of view her sufferings were the greatest of all, are not measured pecuniarily by great figures, on account of her low economic development." He quoted some extraordinary figures of the loss of life--"at above 1,000,000, or more than one-third of the population of Old Serbia." In the end he concludes: "Of all the Allies, Serbian sufferings and losses were proportionately the greatest, and after Serbian, the French. In these times, also, according to professor Hichmann (Geographical Statistical Atlas 1920) "it was found, when the nations counted their losses after the war, that Serb casualties amounted to 23% of her population as compared with 3.7% for Great Britain, 8.5% for France and 9.3% for Germany. No small nation can suffer a loss such as Serbia, drawn moreover entirely from its able-bodied manhood

  11. Leadership development in a professional medical society using 360-degree survey feedback to assess emotional intelligence.

    Science.gov (United States)

    Gregory, Paul J; Robbins, Benjamin; Schwaitzberg, Steven D; Harmon, Larry

    2017-09-01

    The current research evaluated the potential utility of a 360-degree survey feedback program for measuring leadership quality in potential committee leaders of a professional medical association (PMA). Emotional intelligence as measured by the extent to which self-other agreement existed in the 360-degree survey ratings was explored as a key predictor of leadership quality in the potential leaders. A non-experimental correlational survey design was implemented to assess the variation in leadership quality scores across the sample of potential leaders. A total of 63 of 86 (76%) of those invited to participate did so. All potential leaders received feedback from PMA Leadership, PMA Colleagues, and PMA Staff and were asked to complete self-ratings regarding their behavior. Analyses of variance revealed a consistent pattern of results as Under-Estimators and Accurate Estimators-Favorable were rated significantly higher than Over-Estimators in several leadership behaviors. Emotional intelligence as conceptualized in this study was positively related to overall performance ratings of potential leaders. The ever-increasing roles and potential responsibilities for PMAs suggest that these organizations should consider multisource performance reviews as these potential future PMA executives rise through their organizations to assume leadership positions with profound potential impact on healthcare. The current findings support the notion that potential leaders who demonstrated a humble pattern or an accurate pattern of self-rating scored significantly higher in their leadership, teamwork, and interpersonal/communication skills than those with an aggrandizing self-rating.

  12. 70th Anniversary Collection for the Microbiology Society: Journal of Medical Microbiology.

    Science.gov (United States)

    Mathee, Kalai; Silver, Lynn L; Tatke, Gorakh

    2015-12-01

    In the last 70 years, we have seen a radical change in our perception and understanding of the microbial world. During this period, we learned from Woese and Fox there exists a third kingdom called 'Archea' based on the phylogenetic studies of the 16S rRNA that revolutionized microbiology (Woese & Fox, 1977; Woese et al., 1978). Furthermore, we were forced to reckon with the fact that Koch and Pasteur's way of growing cells in test-tubes or flasks planktonically does not necessarily translate to the real-life scenario of bacterial lifestyle, where they prefer to live and function as a closely knit microbial community called biofilm. Thanks are due to Costerton, who led the crusade on the concept of biofilms and expanded its scope of inquiry, which forced scientists and clinicians worldwide to rethink how we evaluate and apply the data. Then progressively, disbelief turned into belief, and now it is universally accepted that the micro-organisms hobnob with the members of their community to communicate and coordinate their behaviour, especially in regard to growth patterns and virulence traits via signalling molecules. Just when we thought that we were losing the battle against bacteria, antimicrobials were discovered. We then witnessed the rise and fall of antibiotics and the development of antibiotic resistance. Due to space and choice limitation, we will focus on the three areas that caused this major paradigm shift (i) antimicrobial resistance (AMR), (ii) biofilm and (iii) quorum sensing (QS), and how the Journal of Medical Microbiology played a major role in advancing the shift.

  13. Capillary blood sampling: national recommendations on behalf of the Croatian Society of Medical Biochemistry and Laboratory Medicine.

    Science.gov (United States)

    Krleza, Jasna Lenicek; Dorotic, Adrijana; Grzunov, Ana; Maradin, Miljenka

    2015-01-01

    Capillary blood sampling is a medical procedure aimed at assisting in patient diagnosis, management and treatment, and is increasingly used worldwide, in part because of the increasing availability of point-of-care testing. It is also frequently used to obtain small blood volumes for laboratory testing because it minimizes pain. The capillary blood sampling procedure can influence the quality of the sample as well as the accuracy of test results, highlighting the need for immediate, widespread standardization. A recent nationwide survey of policies and practices related to capillary blood sampling in medical laboratories in Croatia has shown that capillary sampling procedures are not standardized and that only a small proportion of Croatian laboratories comply with guidelines from the Clinical Laboratory Standards Institute (CLSI) or the World Health Organization (WHO). The aim of this document is to provide recommendations for capillary blood sampling. This document has been produced by the Working Group for Capillary Blood Sampling within the Croatian Society of Medical Biochemistry and Laboratory Medicine. Our recommendations are based on existing available standards and recommendations (WHO Best Practices in Phlebotomy, CLSI GP42-A6 and CLSI C46-A2), which have been modified based on local logistical, cultural, legal and regulatory requirements. We hope that these recommendations will be a useful contribution to the standardization of capillary blood sampling in Croatia.

  14. Optics equations for aero-optical analysis

    Science.gov (United States)

    Sutton, George W.; Pond, John E.

    2011-05-01

    Aero-optical effects occur around moving air vehicles and impact passive imaging or active systems. The air flow around the vehicle is compressed, and often there is a turbulent shear and/or boundary layer both of which cause variations in the index of refraction. Examples of these are reconnaissance aircraft, the Stratospheric Observatory for Infrared Optics (SOFIA), and optically homing hypersonic interceptors. In other applications, a laser beam can be formed within the vehicle, and projected outward and focused on an object. These include the Airborne Laser Laboratory, Airborne Laser and the Airborne Tactical Laser. There are many compressible fluid mechanics computer programs that can predict the air density distribution of the surrounding flow field including density fluctuations in turbulent shear and/or boundary layers. It is necessary for the physical optics to be used to predict the properties of the ensuing image plane intensity distribution, whether passive or active. These include the time-averaged image blur circle and instantaneous realizations. (Ray tracing is a poor approximation that gives erroneous results for small aberrations.)

  15. [Catalogue of learning goals for pregraduate education in geriatric medicine. A recommendation of the German Geriatric Society (DGG), the German Society of Gerontology and Geriatrics (DGGG), the Austrian Society of Geriatrics and Gerontology (ÖGGG) and the Swiss Society of Geriatric Medicine (SFGG) on the basis of recommendations of the European Union of Medical Specialists Geriatric Medicine Section (UEMS-GMS) 2013].

    Science.gov (United States)

    Singler, K; Stuck, A E; Masud, T; Goeldlin, A; Roller, R E

    2014-11-01

    Sound knowledge in the care and management of geriatric patients is essential for doctors in almost all medical subspecialties. Therefore, it is important that pregraduate medical education adequately covers the field of geriatric medicine. However, in most medical faculties in Europe today, learning objectives in geriatric medicine are often substandard or not even explicitly addressed. As a first step to encourage undergraduate teaching in geriatric medicine, the European Union of Medical Specialists -Geriatric Medicine Section (UEMS-GMS) recently developed a catalogue of learning goals using a modified Delphi technique in order to encourage education in this field. This catalogue of learning objectives for geriatric medicine focuses on the minimum requirements with specific learning goals in knowledge, skills and attitudes that medical students should have acquired by the end of their studies.In order to ease the implementation of this new, competence-based curriculum among the medical faculties in universities teaching in the German language, the authors translated the published English language curriculum into German and adapted it according to medical language and terms used at German-speaking medical faculties and universities of Austria, Germany and Switzerland. This article contains the final German translation of the curriculum. The Geriatric Medicine Societies of Germany, Austria, and Switzerland formally endorse the present curriculum and recommend that medical faculties adapt their curricula for undergraduate teaching based on this catalogue.

  16. CONSIDERATIONS ON ANATOMY AND PHYSIOLOGY OF LYMPH VESSELS OF UPPER AERO DIGESTIVE ORGANS AND CERVICAL SATELLITE LYMPH NODE GROUP.

    Science.gov (United States)

    Ciupilan, Corina; Stan, C I

    2016-01-01

    The almost constant local regional development of the cancers of upper aero digestive organs requires the same special attention to cervical lymph node metastases, as well as to the primary neoplastic burning point. The surgical therapy alone or associated has a mutilating, damaging character, resulting in loss of an organ and function, most of the times with social implications, involving physical distortions with aesthetic consequences, which make the reintegration of the individual into society questionable. The problem of cervical lymph node metastases is vast and complex, reason why we approached several anatomical and physiological aspects of lymph vessels of the aero digestive organs. Among the available elements during treatment, the headquarters of the tumour, its histologic degree, and its infiltrative nature, each of them significantly influences the possibility of developing metastases.

  17. Integrated Reconfigurable Aero and Propulsion Control for Improved Flight Safety of Commercial Aircraft, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The main objective of this project is to develop and test a novel innovative Integrated Reconfigurable Aero (i) Adaptive control design for the case of aero-only...

  18. Aero-Optic Evaluation Center (AOEC), Large Energy National Shock (LENS) Tunnels I & II

    Data.gov (United States)

    Federal Laboratory Consortium — The AOEC facility provides world class capability for aero-thermo-chemical, aerooptics and aero-propulsion testing in the Mach number range from 2.5 to 15 using the...

  19. Experimental Technique of Titanium Fire in Aero-engine

    Directory of Open Access Journals (Sweden)

    MI Guangbao

    2016-06-01

    Full Text Available Titanium fire is the typical catastrophic fault in the aero-engine. Aiming at the urgent demand for experimental technique of titanium fire from advanced high thrust-weight ratio aero-engine, the combustion technology and theory of titanium alloy based on friction oxygen concentration method (FOC were systematically studied. The evaluation method of fireproof property and the friction ignition model were built, and the fireproof mechanism was illustrated. By generalizing recent progress in experimental technique of titanium fire from three levels, including evolutionary rule, mechanism and prevention and control technology, the ideas and directions of experimental technique associated with the application research of titanium fire in the future were proposed, namely overall evaluation of fireproof property close to air flow environment of the aero-engine, prediction model of fireproof property and experimental verification of fireproof technique under the air flow environment of aero-engine. It is necessary to establish the prevention system of titanium fire in aero-engine, which contributes to the realization of "full titanium" in compressor and to the increase of high thrust-weight ratio.

  20. Vibration modelling and verifications for whole aero-engine

    Science.gov (United States)

    Chen, G.

    2015-08-01

    In this study, a new rotor-ball-bearing-casing coupling dynamic model for a practical aero-engine is established. In the coupling system, the rotor and casing systems are modelled using the finite element method, support systems are modelled as lumped parameter models, nonlinear factors of ball bearings and faults are included, and four types of supports and connection models are defined to model the complex rotor-support-casing coupling system of the aero-engine. A new numerical integral method that combines the Newmark-β method and the improved Newmark-β method (Zhai method) is used to obtain the system responses. Finally, the new model is verified in three ways: (1) modal experiment based on rotor-ball bearing rig, (2) modal experiment based on rotor-ball-bearing-casing rig, and (3) fault simulations for a certain type of missile turbofan aero-engine vibration. The results show that the proposed model can not only simulate the natural vibration characteristics of the whole aero-engine but also effectively perform nonlinear dynamic simulations of a whole aero-engine with faults.

  1. Medical Deontology towards medical students, our colleagues and our patients. About meetings, medical journals, candidacy for higher posts and the "silent" society.

    Science.gov (United States)

    Grammaticos, Philip C

    2014-01-01

    Unfortunately, today very few care about medical deontology-ethics that is about how to behave and respect others when we exercise our medical duties. Perhaps we do not show our real care and kind leadership to our students. We do not very much respect our medical colleagues. We are often tired to spend much time examining patients. We attend medical meetings for pleasure or because our expenses are covered by pharmaceutical firms. We write unimportant papers in order to have a rich curriculum. We consider the Impact Factor of a journal as awarded only to underline the importance of a letter to the Editor we publish in a prestigious journal. We refrain from useful research. We are not always truthful in publishing the results of our research. Many such examples are included in this paper. Overall, we go for a financial success disregarding the "old" Hippocratic ideas and oath. We are supposed to seak for life-happiness. Instead, we feel guilty, inconvenient as to our social behaviour and unhappy. "The Lancet" mentioned long ago (1969) a phrase by John Keats: "Truth is beauty...this only exists on Earth and this is what we need to know".

  2. American Medical Society for Sports Medicine position statement: concussion in sport.

    Science.gov (United States)

    Harmon, Kimberly G; Drezner, Jonathan A; Gammons, Matthew; Guskiewicz, Kevin M; Halstead, Mark; Herring, Stanley A; Kutcher, Jeffrey S; Pana, Andrea; Putukian, Margot; Roberts, William O

    2013-01-01

    helpful in the post-concussion management of athletes with persistent symptoms or complicated courses. ▸ Students will require cognitive rest and may require academic accommodations such as reduced workload and extended time for tests while recovering from a concussion. ▸ Concussion symptoms should be resolved before returning to exercise. ▸ A RTP progression involves a gradual, step-wise increase in physical demands, sports-specific activities and the risk for contact. ▸ If symptoms occur with activity, the progression should be halted and restarted at the preceding symptom-free step. ▸ RTP after concussion should occur only with medical clearance from a licenced healthcare provider trained in the evaluation and management of concussions. SHORT-TERM RISKS OF PREMATURE RTP: ▸ The primary concern with early RTP is decreased reaction time leading to an increased risk of a repeat concussion or other injury and prolongation of symptoms. LONG-TERM EFFECTS: ▸ There is an increasing concern that head impact exposure and recurrent concussions contribute to long-term neurological sequelae. ▸ Some studies have suggested an association between prior concussions and chronic cognitive dysfunction. Large-scale epidemiological studies are needed to more clearly define risk factors and causation of any long-term neurological impairment. ▸ There are no evidence-based guidelines for disqualifying/retiring an athlete from a sport after a concussion. Each case should be carefully deliberated and an individualised approach to determining disqualification taken. ▸ Greater efforts are needed to educate involved parties, including athletes, parents, coaches, officials, school administrators and healthcare providers to improve concussion recognition, management and prevention. ▸ Physicians should be prepared to provide counselling regarding potential long-term consequences of a concussion and recurrent concussions. ▸ Primary prevention of some injuries may be possible with

  3. Professional burnout in European young oncologists: results of the European Society for Medical Oncology (ESMO) Young Oncologists Committee Burnout Survey.

    Science.gov (United States)

    Banerjee, S; Califano, R; Corral, J; de Azambuja, E; De Mattos-Arruda, L; Guarneri, V; Hutka, M; Jordan, K; Martinelli, E; Mountzios, G; Ozturk, M A; Petrova, M; Postel-Vinay, S; Preusser, M; Qvortrup, C; Volkov, M N M; Tabernero, J; Olmos, D; Strijbos, M H

    2017-07-01

    Burnout in health care professionals could have serious negative consequences on quality of patient care, professional satisfaction and personal life. Our aim was to investigate the burnout prevalence, work and lifestyle factors potentially affecting burnout amongst European oncologists ≤40 (YOs). A survey was conducted using the validated Maslach Burnout Inventory (MBI) and additional questions exploring work/lifestyle factors. Statistical analyses were carried out to identify factors associated with burnout. Total of 737 surveys (all ages) were collected from 41 European countries. Countries were divided into six regions. Results from 595 (81%) YOs were included (81% medical oncologists; 52% trainees, 62% women). Seventy-one percent of YOs showed evidence of burnout (burnout subdomains: depersonalization 50%; emotional exhaustion 45; low accomplishment 35%). Twenty-two percent requested support for burnout during training and 74% reported no hospital access to support services. Burnout rates were significantly different across Europe (P women (60% versus 45% P = 0.0001) and low accomplishment was highest in the 26-30 age group (P balance, access to support services, living alone and inadequate vacation time remained independent burnout factors (P balance, access to support services and adequate vacation time may reduce burnout levels. Raising awareness, support and interventional research are needed. © The Author 2017. Published by Oxford University Press on behalf of the European Society for Medical Oncology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  4. SIERRA/Aero User Manual Version 4.44

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Thermal/Fluid Team

    2017-04-01

    SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

  5. SIERRA/Aero User Manual Version 4.46.

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Thermal/Fluid Team

    2017-09-01

    SIERRA/Aero is a compressible fluid dynamics program intended to solve a wide variety compressible fluid flows including transonic and hypersonic problems. This document describes the commands for assembling a fluid model for analysis with this module, henceforth referred to simply as Aero for brevity. Aero is an application developed using the SIERRA Toolkit (STK). The intent of STK is to provide a set of tools for handling common tasks that programmers encounter when developing a code for numerical simulation. For example, components of STK provide field allocation and management, and parallel input/output of field and mesh data. These services also allow the development of coupled mechanics analysis software for a massively parallel computing environment. In the definitions of the commands that follow, the term Real_Max denotes the largest floating point value that can be represented on a given computer. Int_Max is the largest such integer value.

  6. SIERRA/Aero Theory Manual Version 4.44

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Thermal/Fluid Team

    2017-04-01

    SIERRA/Aero is a two and three dimensional, node-centered, edge-based finite volume code that approximates the compressible Navier-Stokes equations on unstructured meshes. It is applicable to inviscid and high Reynolds number laminar and turbulent flows. Currently, two classes of turbulence models are provided: Reynolds Averaged Navier-Stokes (RANS) and hybrid methods such as Detached Eddy Simulation (DES). Large Eddy Simulation (LES) models are currently under development. The gas may be modeled either as ideal, or as a non-equilibrium, chemically reacting mixture of ideal gases. This document describes the mathematical models contained in the code, as well as certain implementation details. First, the governing equations are presented, followed by a description of the spatial discretization. Next, the time discretization is described, and finally the boundary conditions. Throughout the document, SIERRA/ Aero is referred to simply as Aero for brevity.

  7. SIERRA/Aero Theory Manual Version 4.46.

    Energy Technology Data Exchange (ETDEWEB)

    Sierra Thermal/Fluid Team

    2017-09-01

    SIERRA/Aero is a two and three dimensional, node-centered, edge-based finite volume code that approximates the compressible Navier-Stokes equations on unstructured meshes. It is applicable to inviscid and high Reynolds number laminar and turbulent flows. Currently, two classes of turbulence models are provided: Reynolds Averaged Navier-Stokes (RANS) and hybrid methods such as Detached Eddy Simulation (DES). Large Eddy Simulation (LES) models are currently under development. The gas may be modeled either as ideal, or as a non-equilibrium, chemically reacting mixture of ideal gases. This document describes the mathematical models contained in the code, as well as certain implementation details. First, the governing equations are presented, followed by a description of the spatial discretization. Next, the time discretization is described, and finally the boundary conditions. Throughout the document, SIERRA/ Aero is referred to simply as Aero for brevity.

  8. Vehicle Health Management Communications Requirements for AeroMACS

    Science.gov (United States)

    Kerczewski, Robert J.; Clements, Donna J.; Apaza, Rafael D.

    2012-01-01

    As the development of standards for the aeronautical mobile airport communications system (AeroMACS) progresses, the process of identifying and quantifying appropriate uses for the system is progressing. In addition to defining important elements of AeroMACS standards, indentifying the systems uses impacts AeroMACS bandwidth requirements. Although an initial 59 MHz spectrum allocation for AeroMACS was established in 2007, the allocation may be inadequate; studies have indicated that 100 MHz or more of spectrum may be required to support airport surface communications. Hence additional spectrum allocations have been proposed. Vehicle health management (VHM) systems, which can produce large volumes of vehicle health data, were not considered in the original bandwidth requirements analyses, and are therefore of interest in supporting proposals for additional AeroMACS spectrum. VHM systems are an emerging development in air vehicle safety, and preliminary estimates of the amount of data that will be produced and transmitted off an aircraft, both in flight and on the ground, have been prepared based on estimates of data produced by on-board vehicle health sensors and initial concepts of data processing approaches. This allowed an initial estimate of VHM data transmission requirements for the airport surface. More recently, vehicle-level systems designed to process and analyze VHM data and draw conclusions on the current state of vehicle health have been undergoing testing and evaluation. These systems make use of vehicle system data that is mostly different from VHM data considered previously for airport surface transmission, and produce processed system outputs that will be also need to be archived, thus generating additional data load for AeroMACS. This paper provides an analysis of airport surface data transmission requirements resulting from the vehicle level reasoning systems, within the context of overall VHM data requirements.

  9. Management of hemodynamically unstable pelvic trauma: results of the first Italian consensus conference (cooperative guidelines of the Italian Society of Surgery, the Italian Association of Hospital Surgeons, the Multi-specialist Italian Society of Young Surgeons, the Italian Society of Emergency Surgery and Trauma, the Italian Society of Anesthesia, Analgesia, Resuscitation and Intensive Care, the Italian Society of Orthopaedics and Traumatology, the Italian Society of Emergency Medicine, the Italian Society of Medical Radiology -Section of Vascular and Interventional Radiology- and the World Society of Emergency Surgery)

    Science.gov (United States)

    2014-01-01

    Hemodynamically Unstable Pelvic Trauma is a major problem in blunt traumatic injury. No cosensus has been reached in literature on the optimal treatment of this condition. We present the results of the First Italian Consensus Conference on Pelvic Trauma which took place in Bergamo on April 13 2013. An extensive review of the literature has been undertaken by the Organizing Committee (OC) and forwarded to the Scientific Committee (SC) and the Panel (JP). Members of them were appointed by surgery, critical care, radiology, emergency medicine and orthopedics Italian and International societies: the Italian Society of Surgery, the Italian Association of Hospital Surgeons, the Multi-specialist Italian Society of Young Surgeons, the Italian Society of Emergency Surgery and Trauma, the Italian Society of Anesthesia, Analgesia, Resuscitation and Intensive Care, the Italian Society of Orthopaedics and Traumatology, the Italian Society of Emergency Medicine, the Italian Society of Medical Radiology, Section of Vascular and Interventional Radiology and the World Society of Emergency Surgery. From November 2012 to January 2013 the SC undertook the critical revision and prepared the presentation to the audience and the Panel on the day of the Conference. Then 3 recommendations were presented according to the 3 submitted questions. The Panel voted the recommendations after discussion and amendments with the audience. Later on a email debate took place until December 2013 to reach a unanimous consent. We present results on the 3 following questions: which hemodynamically unstable patient needs an extraperitoneal pelvic packing? Which hemodynamically unstable patient needs an external fixation? Which hemodynamically unstable patient needs emergent angiography? No longer angiography is considered the first therapeutic maneuver in such a patient. Preperitoneal pelvic packing and external fixation, preceded by pelvic binder have a pivotal role in the management of these patients

  10. Robert R. Shaw, MD: thoracic surgical hero, Afghanistan medical pioneer, champion for the patient, never a surgical society president.

    Science.gov (United States)

    Urschel, Harold C; Urschel, Betsey Bradley

    2012-06-01

    Dr Robert R. Shaw arrived in Dallas to practice Thoracic Surgery in 1937, as John Alexander's 7th Thoracic Surgical Resident from Michigan University Medical Center. Dr Shaw's modus operandi was, "You can accomplish almost anything, if you don't care who gets the credit." He was a remarkable individual who cared the most about the patient and very little about getting credit for himself. From 1937 to 1970, Dr Shaw established one of the largest lung cancer surgical centers in the world in Dallas, Texas. It was larger than M.D. Anderson and Memorial Sloan-Kettering Hospitals put together regarding the surgical treatment of lung cancer patients. To accomplish this, he had the help of Dr Donald L. Paulson, who trained at the Mayo Clinic and served as Chief of Thoracic Surgery at Brook Army Hospital during the Second World War. Following the War, because of his love for Texas, he ended up as a partner of Dr Shaw in Dallas. Together, they pursued the development of this very large surgical lung cancer center. Dr Shaw and his wife Ruth went to Afghanistan with Medico multiple times to teach men modern cardiac and thoracic surgery. They also served as consultants on Medico's Ship of Hope in Africa. Dr Shaw initiated multiple new operations including: 1) resection of Pancoast's cancer of the lung after preoperative irradiation; 2) upper lobe of the lung bronchoplasty, reattaching (and saving) the lower lobe to prevent the "disabling" pneumonectomy; and 3) resections of pulmonary mucoid impaction of the lung in asthmatics. Because of his humility and giving "the credit to others," Dr Shaw was never President of a major medical or surgical association. Copyright © 2012 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  11. Blood gas testing and related measurements: National recommendations on behalf of the Croatian Society of Medical Biochemistry and Laboratory Medicine.

    Science.gov (United States)

    Dukić, Lora; Kopčinović, Lara Milevoj; Dorotić, Adrijana; Baršić, Ivana

    2016-10-15

    Blood gas analysis (BGA) is exposed to risks of errors caused by improper sampling, transport and storage conditions. The Clinical and Laboratory Standards Institute (CLSI) generated documents with recommendations for avoidance of potential errors caused by sample mishandling. Two main documents related to BGA issued by the CLSI are GP43-A4 (former H11-A4) Procedures for the collection of arterial blood specimens; approved standard - fourth edition, and C46-A2 Blood gas and pH analysis and related measurements; approved guideline - second edition. Practices related to processing of blood gas samples are not standardized in the Republic of Croatia. Each institution has its own protocol for ordering, collection and analysis of blood gases. Although many laboratories use state of the art analyzers, still many preanalytical procedures remain unchanged. The objective of the Croatian Society of Medical Biochemistry and Laboratory Medicine (CSMBLM) is to standardize the procedures for BGA based on CLSI recommendations. The Working Group for Blood Gas Testing as part of the Committee for the Scientific Professional Development of the CSMBLM prepared a set of recommended protocols for sampling, transport, storage and processing of blood gas samples based on relevant CLSI documents, relevant literature search and on the results of Croatian survey study on practices and policies in acid-base testing. Recommendations are intended for laboratory professionals and all healthcare workers involved in blood gas processing.

  12. Overview of NASA Power Technologies for Space and Aero Applications

    Science.gov (United States)

    Beach, Raymond F.

    2014-01-01

    To achieve the ambitious goals that NASA has outlined for the next decades considerable development of power technology will be necessary. This presentation outlines the development objectives for both the space and aero applications. It further looks at the various power technologies that support these objectives and examines drivers that will be a driving force for future development.

  13. Assessment of Aero-radiometric Data of Southern Anambra Basin ...

    African Journals Online (AJOL)

    High-resolution aero-radiometric data from three radio-elements (Uranium, Potassium and Thorium) were used and processed independently to investigate the Southern Anambra basin for the prospect of producing radiogenic heat. The rock types in the study area were outlined while processing the elements in each rock ...

  14. Integrated evaluation of the geology, aero gamma spectrometry and aero magnetometry of the Sul-Riograndense Shield, southernmost Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, Leo A.; Savian, Jairo F., E-mail: leo.hartmann@ufrgs.br [Universidade Federal do Rio Grande do Sul (UFRS), Porto Alegre, RS (Brazil). Instituto de Geociencias; Lopes, William R. [Servico Geologico do Brasil (CPRM), Porto Alegre, RS (Brazil). Gerencia de Geologia e Mineracao

    2016-03-15

    An integrated evaluation of geology, aero gamma spectrometry and aero magnetometry of the Sul-Riograndense Shield is permitted by the advanced stage of understanding of the geology and geochronology of the southern Brazilian Shield and a 2010 airborne geophysical survey. Gamma rays are registered from the rocks near the surface and thus describe the distribution of major units in the shield, such as the Pelotas batholith, the juvenile São Gabriel terrane, the granulite-amphibolite facies Taquarembo terrane and the numerous granite intrusions in the foreland. Major structures are also observed, e.g., the Dorsal de Cangucu shear. Magnetic signals register near surface crustal compositions (analytic signal) and total crust composition (total magnetic signal), so their variation as measured indicates either shallow or whole crustal structures. The Cacapava shear is outstanding on the images as is the magnetic low along the N-S central portion of the shield. These integrated observations lead to the deepening of the understanding of the largest and even detailed structures of the Sul-Riograndense Shield, some to be correlated to field geology in future studies. Most significant is the presence of different provinces and their limits depending on the method used for data acquisition - geology, aero gamma spectrometry or aero magnetometry. (author)

  15. Recommendations for the follow-up care of female breast cancer survivors: a guideline of the Spanish Society of Medical Oncology (SEOM), Spanish Society of General Medicine (SEMERGEN), Spanish Society for Family and Community Medicine (SEMFYC), Spanish Society for General and Family Physicians (SEMG), Spanish Society of Obstetrics and Gynecology (SEGO), Spanish Society of Radiation Oncology (SEOR), Spanish Society of Senology and Breast Pathology (SESPM), and Spanish Society of Cardiology (SEC).

    Science.gov (United States)

    Barnadas, A; Algara, M; Cordoba, O; Casas, A; Gonzalez, M; Marzo, M; Montero, A; Muñoz, M; Ruiz, A; Santolaya, F; Fernandez, T

    2018-06-01

    The increased incidence and decreased mortality of breast cancer have produced an increased number of breast cancer survivors. The type of sequelae and comorbidities that these patients present call for a collaborative follow-up by hospital-based specialized care and primary care. In this document, we present a guideline drafted and agreed among scientific societies whose members care for breast cancer survivors. The purpose of this guideline is to achieve the shared and coordinated follow-up of these patients by specialized care and primary care professionals. In it, we review the health issues derived from the treatments performed, with recommendations about the therapeutic approach to each of them, as well as a proposal for joint follow-up by primary and specialized care.

  16. Aero-Acoustic Modelling using Large Eddy Simulation

    International Nuclear Information System (INIS)

    Shen, W Z; Soerensen, J N

    2007-01-01

    The splitting technique for aero-acoustic computations is extended to simulate three-dimensional flow and acoustic waves from airfoils. The aero-acoustic model is coupled to a sub-grid-scale turbulence model for Large-Eddy Simulations. In the first test case, the model is applied to compute laminar flow past a NACA 0015 airfoil at a Reynolds number of 800, a Mach number of 0.2 and an angle of attack of 20 deg. The model is then applied to compute turbulent flow past a NACA 0015 airfoil at a Reynolds number of 100 000, a Mach number of 0.2 and an angle of attack of 20 deg. The predicted noise spectrum is compared to experimental data

  17. 76 FR 77108 - Airworthiness Directives; International Aero Engines Turbofan Engines

    Science.gov (United States)

    2011-12-12

    ... Airworthiness Directives; International Aero Engines Turbofan Engines AGENCY: Federal Aviation Administration...-D5, V2530-A5, and V2533-A5 turbofan engines. This AD was prompted by three reports of high- pressure..., V2524-A5, V2525-D5, V2527-A5, V2527E-A5, V2527M-A5, V2528- D5, V2530-A5, and V2533-A5 turbofan engines...

  18. [Rural medical practice at the beginning of the 20th century. Martínez Saldise (1855-1937), honorary member of Paediatric Society of Madrid in 1927].

    Science.gov (United States)

    Zafra Anta, Miguel Ángel; Flores Martín, Carlos; Ponte Hernando, Fernando Julio; Gil García, Andrés; Gómez López, Ana; Fernández Durán, Carla

    2016-01-01

    On the centenary of the foundation of the Paediatrics Society of Madrid, a tribute is presented to rural medical practice of that time, although there are few documents on the history of rural medicine. The main objective is to describe the context of the rural medical practice in the late 19th and beginning 20th century, while presenting a historical biographical review of Manuel Martínez Saldise, who was medical specialist from Cazalegas (Toledo). He was appointed an Honorary Member by the Paediatrics Society of Madrid in 1927. A search was carried out in repositories of digitized media, web portals of history of medicine, PubMed, IME files of local councils and medical colleges. The family archives were reviewed with the collaboration of his descendants. The hiring of rural doctors was carried out by the municipalities, and the salary largely depended on private practice as well as "retainers". Specialist physicians took part in epidemics, legal medicine, and in hygiene measures. They also had disputes with mayors, chiefs, with colleagues and with protectionism. A summary of the biography and occupational activity of Manuel Martínez Saldise is presented. Rural doctors were subjected to the society of their time, with the issues that arose, denouncing the shortcomings of the local administrations, dedicated efforts to their family and the most disadvantaged. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

  19. Maintenance Decision Based on Data Fusion of Aero Engines

    Directory of Open Access Journals (Sweden)

    Huawei Wang

    2013-01-01

    Full Text Available Maintenance has gained a great importance as a support function for ensuring aero engine reliability and availability. Cost-effectiveness and risk control are two basic criteria for accurate maintenance. Given that aero engines have much condition monitoring data, this paper presents a new condition-based maintenance decision system that employs data fusion for improving accuracy of reliability evaluation. Bayesian linear model has been applied, so that the performance degradation evaluation of aero engines could be realized. A reliability evaluation model has been presented based on gamma process, which achieves the accurate evaluation by information fusion. In reliability evaluation model, the shape parameter is estimated by the performance degradation evaluation result, and the scale parameter is estimated by failure, inspection, and repair information. What is more, with such reliability evaluation as input variables and by using particle swarm optimization (PSO, a stochastic optimization of maintenance decision for aircraft engines has been presented, in which the effectiveness and the accuracy are demonstrated by a numerical example.

  20. Changing Anthropology, Changing Society

    Science.gov (United States)

    Varughese, Heather

    2009-01-01

    Fifty years after the founding of the field of medical anthropology, the Society for Medical Anthropology of the American Anthropological Association held its first independent meeting on September 24-27, 2009, at Yale University. PMID:20027281

  1. An Unwilling Partnership With the Great Society Part I: Head Start and the Beginning of Change in the White Medical Community.

    Science.gov (United States)

    deShazo, Richard D; Minor, Wilson F Bill; Smith, Robert; Skipworth, Leigh Baldwin

    2016-07-01

    By 1965, the policies and programs of Lyndon B. Johnson's Great Society brought optimism to black physicians and a new wave of resistance against black civil rights advocates in the American South. The largest of the first Head Start programs, Child Development Group of Mississippi (CDGM), had its roots in Freedom Summer 1964 and the Medical Committee for Human Rights. Like other proposed programs with strong medical components, CDGM was caught in a legislative Bermuda triangle created by the powerful Mississippi congressional delegation to maintain white supremacy and plantation economics. Physician-led investigations exposed the extraordinary level of poor health among Mississippi's black children, supported Head Start as a remedy, and awakened the white medical establishment to health disparities of the Jim Crow period. It was also the beginning of positive change in the previously silent white medical community in the South and their support of civil justice in health. Copyright © 2016 Southern Society for Clinical Investigation. Published by Elsevier Inc. All rights reserved.

  2. 78 FR 22168 - Airworthiness Directives; International Aero Engines AG Turbofan Engines

    Science.gov (United States)

    2013-04-15

    ... Airworthiness Directives; International Aero Engines AG Turbofan Engines AGENCY: Federal Aviation Administration... International Aero Engines AG (IAE), V2525-D5 and V2528-D5 turbofan engines, with a certain No. 4 bearing... turbofan engines, serial numbers V20001 through V20285, with No. 4 bearing internal scavenge tube, part...

  3. 76 FR 60396 - Airworthiness Directives; Piaggio Aero Industries S.p.A. Airplanes

    Science.gov (United States)

    2011-09-29

    ...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... on other P.180 aeroplanes, and Piaggio Aero Industries (PAI) had issued Service Bulletin (SB) No. 80... information by examining the MCAI in the AD docket. Relevant Service Information Piaggio Aero Industries S.p.A...

  4. 77 FR 35888 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Airplanes

    Science.gov (United States)

    2012-06-15

    ...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service.... Relevant Service Information PIAGGIO AERO INDUSTRIES S.p.A. has issued Service Bulletin No. 80- 0318, dated... Instructions of Piaggio Aero Industries S.p.A. Mandatory Service Bulletin No. 80-0318, revision 2, dated March...

  5. 78 FR 36691 - Airworthiness Directives; Piaggio Aero Industries S.p.A Airplanes

    Science.gov (United States)

    2013-06-19

    ...., Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service... condition, Piaggio Aero Industries (PAI) issued Service Bulletin (SB) 80-0345 to provide instructions for... in the AD docket. Relevant Service Information Piaggio Aero Industries S.p.A. has issued Mandatory...

  6. 76 FR 27872 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model P-180 Airplanes

    Science.gov (United States)

    2011-05-13

    ... through Friday, except Federal holidays. For service information identified in this AD, contact Piaggio... accomplishment instructions of Piaggio Aero Industries Alert Service Bulletin ASB- 80-0324, step 5, this AD.... Relevant Service Information PIAGGIO AERO INDUSTRIES S.p.A has issued Service Bulletin (Mandatory) N.: 80...

  7. 78 FR 69600 - Airworthiness Directives; Piaggio Aero Industries S.p.A Airplanes

    Science.gov (United States)

    2013-11-20

    ... p.m., Monday through Friday, except Federal holidays. For service information identified in this.... To address this potential unsafe condition, Piaggio Aero Industries (PAI) issued Service [[Page 69601... Service Information Piaggio Aero Industries S.p.A. has issued Mandatory Service Bulletin No.: 80-0381, Rev...

  8. 76 FR 54403 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model PIAGGIO P-180 Airplanes

    Science.gov (United States)

    2011-09-01

    ... Federal holidays. For service information identified in this proposed AD, contact Piaggio Aero Industries... Service Information Piaggio Aero Industries S.p.A. has issued Mandatory Service Bulletin No. 80-0304... Accomplishment Instructions of Piaggio Aero Industries S.p.A. Mandatory Service Bulletin No. 80-0304, dated July...

  9. Aero-acoustics noise assessment for Wind-Lens turbine

    International Nuclear Information System (INIS)

    Hashem, I.; Mohamed, M.H.; Hafiz, A.A.

    2017-01-01

    This paper introduces an aero-acoustic computational study that investigates the noise caused by one of the most promising wind energy conversion concepts, namely the 'Wind-Lens' technology. The hybrid method - where the flow field and acoustic field are solved separately, was deemed to be an appropriate tool to compute this study. The need to investigate this phenomenon increased gradually, since the feasibility of utilizing Wind-Lens turbine within densely populated cities and urban areas depends largely on their noise generation. Ffowcs Williams-Hawkings (FW-H) equation and its integral solution are used to predict the noise radiating to the farfield. CFD Simulations of transient three-dimensional flow field using (URANS) unsteady Reynolds-averaged Navier-Stokes equations are computed to acquire the acoustic sources location and sound intensity. Then, the noise propagates from the before-mentioned sources to pre-defined virtual microphones positioned in different locations. ANSYS-FLUENT is used to calculate the flow field on and around such turbines which is required for the FW-H code. Some effective parameters are investigated such as Wind-Lens shape, brim height and tip speed ratio. Comparison of the noise emitted from the bare wind turbine and different types of Wind-Lens turbine reveals that, the Wind-Lens generates higher noise intensity. - Highlights: • Aero-acoustic noise generated by wind turbines are one of the major challenges. • Noise from wind turbine equipped with a brimmed diffuser is investigated. • A computational aero-acoustic study using the hybrid method is introduced. • Effective parameters are studied such Wind-Lens shape, brim height and speed ratio. • The optimal shape has a moderate power coefficient and the less noise generation.

  10. Future NASA Power Technologies for Space and Aero Propulsion Applications

    Science.gov (United States)

    Soeder, James F.

    2015-01-01

    To achieve the ambitious goals that NASA has outlined for the next decades considerable development of power technology will be necessary. This presentation outlines the development objectives for both space and aero applications. It further looks at the various power technologies that support these objectives and examines drivers that will be a driving force for future development. Finally, the presentation examines what type of non-traditional learning areas should be emphasized in student curriculum so that the engineering needs of the third decade of the 21st Century are met.

  11. Aero-acoustic noise of wind turbines. Noise prediction models

    Energy Technology Data Exchange (ETDEWEB)

    Maribo Pedersen, B. [ed.

    1997-12-31

    Semi-empirical and CAA (Computational AeroAcoustics) noise prediction techniques are the subject of this expert meeting. The meeting presents and discusses models and methods. The meeting may provide answers to the following questions: What Noise sources are the most important? How are the sources best modeled? What needs to be done to do better predictions? Does it boil down to correct prediction of the unsteady aerodynamics around the rotor? Or is the difficult part to convert the aerodynamics into acoustics? (LN)

  12. Optimization of Aero Engine Acceleration Control in Combat State Based on Genetic Algorithms

    Science.gov (United States)

    Li, Jie; Fan, Ding; Sreeram, Victor

    2012-03-01

    In order to drastically exploit the potential of the aero engine and improve acceleration performance in the combat state, an on-line optimized controller based on genetic algorithms is designed for an aero engine. For testing the validity of the presented control method, detailed joint simulation tests of the designed controller and the aero engine model are performed in the whole flight envelope. Simulation test results show that the presented control algorithm has characteristics of rapid convergence speed, high efficiency and can fully exploit the acceleration performance potential of the aero engine. Compared with the former controller, the designed on-line optimized controller (DOOC) can improve the security of the acceleration process and greatly enhance the aero engine thrust in the whole range of the flight envelope, the thrust increases an average of 8.1% in the randomly selected working states. The plane which adopts DOOC can acquire better fighting advantage in the combat state.

  13. Computation and analysis of backward ray-tracing in aero-optics flow fields.

    Science.gov (United States)

    Xu, Liang; Xue, Deting; Lv, Xiaoyi

    2018-01-08

    A backward ray-tracing method is proposed for aero-optics simulation. Different from forward tracing, the backward tracing direction is from the internal sensor to the distant target. Along this direction, the tracing in turn goes through the internal gas region, the aero-optics flow field, and the freestream. The coordinate value, the density, and the refractive index are calculated at each tracing step. A stopping criterion is developed to ensure the tracing stops at the outer edge of the aero-optics flow field. As a demonstration, the analysis is carried out for a typical blunt nosed vehicle. The backward tracing method and stopping criterion greatly simplify the ray-tracing computations in the aero-optics flow field, and they can be extended to our active laser illumination aero-optics study because of the reciprocity principle.

  14. Interference Analysis Status and Plans for Aeronautical Mobile Airport Communications System (AeroMACS)

    Science.gov (United States)

    Kerczewski, Robert J.; Wilson, Jeffrey D.

    2010-01-01

    Interference issues related to the operation of an aeronautical mobile airport communications system (AeroMACS) in the C-Band (specifically 5091-5150 MHz) is being investigated. The issue of primary interest is co-channel interference from AeroMACS into mobile-satellite system (MSS) feeder uplinks. The effort is focusing on establishing practical limits on AeroMACS transmissions from airports so that the threshold of interference into MSS is not exceeded. The analyses are being performed with the software package Visualyse Professional, developed by Transfinite Systems Limited. Results with omni-directional antennas and plans to extend the models to represent AeroMACS more accurately will be presented. These models should enable realistic analyses of emerging AeroMACS designs to be developed from NASA Test Bed, RTCA 223, and European results.

  15. [Medical assessment of occupational disability (preparation of a list of occupational diseases with the colaboration of scientific societies)].

    Science.gov (United States)

    Jardón-Dato, E

    Amongst the financial benefits given by the Social Security Service, that of disability benefit is one of the most important. To determine the right to obtain this and the amount due, it is necessary to have administrative certification of the existence of this disability, the cause of it and the degree (partial, total, absolute or great disability). Therefore medical assessment is essential. The medical assessors of the Disability Tribunals of the Instituto Nacional de la Seguridad Social are responsible for medical assessment. It is necessary for these doctors to understand all types of disorders and useful for them to have methodology at their disposal for each of the different disorders. Also, lack of official criteria for evaluation, due to the variety of situations which may arise, make unification difficult. We aim to devise criteria for evaluation of the diagnosis, by means of the tests and investigations necessary, their evaluation and the symptoms of each disorder which may cause problems (deficiencies) in the individual person, when carrying out his work (determining which tests and investigations allow this to be shown). Neurology is one of the specialities which offers the greatest difficulty to nonspecialists. This is due to the evaluation of complementary tests used and the subjectivity of some defects. In this paper, we aim to report these difficulties in order to promote collaboration between medical assessors and Neurology specialists.

  16. Mexican Society of Bioelectromagnetism

    International Nuclear Information System (INIS)

    Canedo, Luis

    2008-01-01

    In July 2007 physicians, biologists and physicists that have collaborated in previous meetings of the medical branch of the Mexican Physical Society constituted the Mexican Society of Bioelectromagnetism with the purpose of promote scientific study of the interaction of electromagnetic energy (at frequencies ranging from zero Hertz through those of visible light) and acoustic energy with biological systems. A second goal was to increase the contribution of medical and biological professionals in the meetings of the medical branch of the Mexican Physical Society. The following paragraphs summarize some objectives of the Mexican Society of Bioelectromagnetism for the next two years

  17. American Society of Addiction Medicine (ASAM) National Practice Guideline for the Use of Medications in the Treatment of Addiction Involving Opioid Use.

    Science.gov (United States)

    Kampman, Kyle; Jarvis, Margaret

    2015-01-01

    The Centers for Disease Control have recently described opioid use and resultant deaths as an epidemic. At this point in time, treating this disease well with medication requires skill and time that are not generally available to primary care doctors in most practice models. Suboptimal treatment has likely contributed to expansion of the epidemic and concerns for unethical practices. At the same time, access to competent treatment is profoundly restricted because few physicians are willing and able to provide it. This "Practice Guideline" was developed to assist in the evaluation and treatment of opioid use disorder, and in the hope that, using this tool, more physicians will be able to provide effective treatment. Although there are existing guidelines for the treatment of opioid use disorder, none have included all of the medications used at present for its treatment. Moreover, few of the existing guidelines address the needs of special populations such as pregnant women, individuals with co-occurring psychiatric disorders, individuals with pain, adolescents, or individuals involved in the criminal justice system. This Practice Guideline was developed using the RAND Corporation (RAND)/University of California, Los Angeles (UCLA) Appropriateness Method (RAM) - a process that combines scientific evidence and clinical knowledge to determine the appropriateness of a set of clinical procedures. The RAM is a deliberate approach encompassing review of existing guidelines, literature reviews, appropriateness ratings, necessity reviews, and document development. For this project, American Society of Addiction Medicine selected an independent committee to oversee guideline development and to assist in writing. American Society of Addiction Medicine's Quality Improvement Council oversaw the selection process for the independent development committee. Recommendations included in the guideline encompass a broad range of topics, starting with the initial evaluation of the

  18. DEGRO 2012. 18. annual congress of the German Radiation Oncology Society. Radiation oncology - medical physics - radiation biology. Abstracts

    International Nuclear Information System (INIS)

    Anon.

    2012-01-01

    The volume includes the abstracts of the contributions and posters of the 18th annual congress of the German Radiation Oncology Society DEGRO 2012. The lectures covered the following topics: Radiation physics, therapy planning; gastrointestinal tumors; radiation biology; stererotactic radiotherapy/breast carcinomas; quality management - life quality; head-neck-tumors/lymphomas; NSCL (non-small cell lung carcinomas); pelvic tumors; brain tumors/pediatric tumors. The poster sessions included the following topics: quality management, recurrent tumor therapy; brachytherapy; breast carcinomas and gynecological tumors; pelvis tumors; brain tumors; stereotactic radiotherapy; head-neck carcinomas; NSCL, proton therapy, supporting therapy; clinical radio-oncology, radiation biology, IGRT/IMRT.

  19. Interventional spine and pain procedures in patients on antiplatelet and anticoagulant medications: guidelines from the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, the American Academy of Pain Medicine, the International Neuromodulation Society, the North American Neuromodulation Society, and the World Institute of Pain.

    Science.gov (United States)

    Narouze, Samer; Benzon, Honorio T; Provenzano, David A; Buvanendran, Asokumar; De Andres, José; Deer, Timothy R; Rauck, Richard; Huntoon, Marc A

    2015-01-01

    Interventional spine and pain procedures cover a far broader spectrum than those for regional anesthesia, reflecting diverse targets and goals. When surveyed, interventional pain and spine physicians attending the American Society of Regional Anesthesia and Pain Medicine (ASRA) 11th Annual Pain Medicine Meeting exhorted that existing ASRA guidelines for regional anesthesia in patients on antiplatelet and anticoagulant medications were insufficient for their needs. Those surveyed agreed that procedure-specific and patient-specific factors necessitated separate guidelines for pain and spine procedures. In response, ASRA formed a guidelines committee. After preliminary review of published complication reports and studies, committee members stratified interventional spine and pain procedures according to potential bleeding risk as low-, intermediate-, and high-risk procedures. The ASRA guidelines were deemed largely appropriate for the low- and intermediate-risk categories, but it was agreed that the high-risk targets required an intensive look at issues specific to patient safety and optimal outcomes in pain medicine. The latest evidence was sought through extensive database search strategies and the recommendations were evidence-based when available and pharmacology-driven otherwise. We could not provide strength and grading of these recommendations as there are not enough well-designed large studies concerning interventional pain procedures to support such grading. Although the guidelines could not always be based on randomized studies or on large numbers of patients from pooled databases, it is hoped that they will provide sound recommendations and the evidentiary basis for such recommendations.

  20. Optimization of Heat Exchangers for Intercooled Recuperated Aero Engines

    Directory of Open Access Journals (Sweden)

    Dimitrios Misirlis

    2017-03-01

    Full Text Available In the framework of the European research project LEMCOTEC, a section was devoted to the further optimization of the recuperation system of the Intercooled Recuperated Aero engine (IRA engine concept, of MTU Aero Engines AG. This concept is based on an advanced thermodynamic cycle combining both intercooling and recuperation. The present work is focused only on the recuperation process. This is carried out through a system of heat exchangers mounted inside the hot-gas exhaust nozzle, providing fuel economy and reduced pollutant emissions. The optimization of the recuperation system was performed using computational fluid dynamics (CFD computations, experimental measurements and thermodynamic cycle analysis for a wide range of engine operating conditions. A customized numerical tool was developed based on an advanced porosity model approach. The heat exchangers were modeled as porous media of predefined heat transfer and pressure loss behaviour and could also incorporate major and critical heat exchanger design decisions in the CFD computations. The optimization resulted in two completely new innovative heat exchanger concepts, named as CORN (COnical Recuperative Nozzle and STARTREC (STraight AnnulaR Thermal RECuperator, which provided significant benefits in terms of fuel consumption, pollutants emission and weight reduction compared to more conventional heat exchanger designs, thus proving that further optimization potential for this technology exists.

  1. AeroVironment technician checks a Helios solar cell panel

    Science.gov (United States)

    2000-01-01

    A technician at AeroVironment's Design Development Center in Simi Valley, California, checks a panel of silicon solar cells for conductivity and voltage. The bi-facial cells, fabricated by SunPower, Inc., of Sunnyvale, California, are among 64,000 solar cells which have been installed on the Helios Prototype solar-powered aircraft to provide power to its 14 electric motors and operating systems. Developed by AeroVironment under NASA's Environmental Research Aircraft and Sensor Technology (ERAST) project, the Helios Prototype is the forerunner of a planned fleet of slow-flying, long duration, high-altitude aircraft which can perform atmospheric science missions and serve as telecommunications relay platforms in the stratosphere. Target goals set by NASA for the giant 246-foot span flying wing include reaching and sustaining subsonic horizontal flight at 100,000 feet altitude in 2001, and sustained continuous flight for at least four days and nights above 50,000 feet altitude with the aid of a regenerative fuel cell-based energy storage system now under development in 2003.

  2. Spectral Behavior of Weakly Compressible Aero-Optical Distortions

    Science.gov (United States)

    Mathews, Edwin; Wang, Kan; Wang, Meng; Jumper, Eric

    2016-11-01

    In classical theories of optical distortions by atmospheric turbulence, an appropriate and key assumption is that index-of-refraction variations are dominated by fluctuations in temperature and the effects of turbulent pressure fluctuations are negligible. This assumption is, however, not generally valid for aero-optical distortions caused by turbulent flow over an optical aperture, where both temperature and pressures fluctuations may contribute significantly to the index-of-refraction fluctuations. A general expression for weak fluctuations in refractive index is derived using the ideal gas law and Gladstone-Dale relation and applied to describe the spectral behavior of aero-optical distortions. Large-eddy simulations of weakly compressible, temporally evolving shear layers are then used to verify the theoretical results. Computational results support theoretical findings and confirm that if the log slope of the 1-D density spectrum in the inertial range is -mρ , the optical phase distortion spectral slope is given by - (mρ + 1) . The value of mρ is then shown to be dependent on the ratio of shear-layer free-stream densities and bounded by the spectral slopes of temperature and pressure fluctuations. Supported by HEL-JTO through AFOSR Grant FA9550-13-1-0001 and Blue Waters Graduate Fellowship Program.

  3. AB133. The Directors of Japanese Society for Sexual Medicine have a positive attitude for sexuality education in Japanese medical schools

    Science.gov (United States)

    Shirai, Masato; Tsujimura, Akira; Hisasue, Shin-Ichi; Abdelhamed, Amr; Horie, Shiego

    2015-01-01

    Objective The purpose of the present study was to investigate the current state of sexuality education in Japanese medical schools and the association of the position title of Japanese Society for Sexual Medicine (JSSM). Methods We surveyed the four factors, the number of lecture components, the time of curriculum hours, the degree of sufficiency level of the components, and the degree of sufficiency level of the curriculum hours in medical schools in Japan. Also, we have investigated the four factors difference among three groups, Directors, Council, and Non-member of JSSM. Results Of the 80 medical schools, the faculties of the Urological department of 69 medical schools (86%) responded. The mean number of lecture components was 7.8. The number of lecture components of Directors (10.2) had significantly higher than Council (4.7) and Non-member (7.3). There is no significant difference the number of lecture components between Council and Non-member. The mean curriculum hour was 113 minutes. The curriculum hour of Directors (152.6) was significantly longer than Non-member (95.9). There is no significant difference the curriculum hour between Council (106.7) and Non-member. The satisfactory degree of the components was very satisfied (1.5%), satisfied (26.5%), not satisfied (55.9%), and dissatisfied (16.5%) for the faculties. The satisfactory degree of the curriculum hours was very long (0%), long (0%), moderate (50%), short (45.6%), and very short (4.4%) for the faculties. There is no significant difference the satisfactory degree of the components and the curriculum hours among three groups. Conclusions The Directors of JSSM have a positive attitude for sexuality education in Japanese medical schools. While curriculum hour is insufficient for the faculties in half of medical schools, over 70% medical schools answered that the lecture components are insufficient, too. Now we should make every effort to achieve sufficient components for sexuality education. We need

  4. Medical imaging in personalised medicine: a white paper of the research committee of the European Society of Radiology (ESR).

    Science.gov (United States)

    2015-04-01

    The future of medicine lies in early diagnosis and individually tailored treatments, a concept that has been designated 'personalised medicine' (PM), which aims to deliver the right treatment to the right patient at the right time. Medical imaging has always been personalised and is fundamental to almost all aspects of PM. It is instrumental in solving clinical differential diagnoses. Imaging procedures are tailored to the clinical problem and patient characteristics. Screening for preclinical disease is done with imaging. Stratification based on imaging biomarkers can help identify individuals suited for preventive intervention. Treatment decisions are based on the in vivo visualisation of the location and extent of an abnormality, as well as the loco-regional physiological, biochemical and biological processes using structural and molecular imaging. Image-guided biopsy provides relevant tissue specimens for genetic/molecular characterisation. In addition, radiogenomics relate imaging biomarkers to these genetic and molecular features. Furthermore, imaging is essential to patient-tailored therapy planning, therapy monitoring and follow-up of disease, as well as targeting non-invasive or minimally invasive treatments, especially with the rise of theranostics. Radiologists need to be prepared for this new paradigm as it will mean changes in training, clinical practice and in research. Key Points • Medical imaging is a key component in personalised medicine • Personalised prevention will rely on image-based screening programmes • Anatomical, functional and molecular imaging biomarkers affect decisions on the type and intensity of treatment • Treatment response assessment with imaging will improve personalised treatment • Image-based invasive intervention integrates personalised diagnosis and personalised treatment.

  5. Assessing the cost of implementing the 2011 Society of Obstetricians and Gynecologists of Canada and Canadian College of Medical Genetics practice guidelines on the detection of fetal aneuploidies.

    Science.gov (United States)

    Lilley, Margaret; Hume, Stacey; Karpoff, Nina; Maire, Georges; Taylor, Sherry; Tomaszewski, Robert; Yoshimoto, Maisa; Christian, Susan

    2017-09-01

    The Society of Obstetricians and Gynecologists of Canada and the Canadian College of Medical Genetics published guidelines, in 2011, recommending replacement of karyotype with quantitative fluorescent polymerase chain reaction when prenatal testing is performed because of an increased risk of a common aneuploidy. This study's objective is to perform a cost analysis following the implementation of quantitative fluorescent polymerase chain reaction as a stand-alone test. A total of 658 samples were received between 1 April 2014 and 31 August 2015: 576 amniocentesis samples and 82 chorionic villi sampling. A chromosome abnormality was identified in 14% (93/658) of the prenatal samples tested. The implementation of the 2011 Society of Obstetricians and Gynecologists of Canada and the Canadian College of Medical Genetics guidelines in Edmonton and Northern Alberta resulted in a cost savings of $46 295.80. The replacement of karyotype with chromosomal microarray for some indications would be associated with additional costs. The implementation of new test methods may provide cost savings or added costs. Cost analysis is important to consider during the implementation of new guidelines or technologies. © 2017 John Wiley & Sons, Ltd. © 2017 John Wiley & Sons, Ltd.

  6. Predicting Cavitation on Marine and Hydrokinetic Turbine Blades with AeroDyn V15.04

    Energy Technology Data Exchange (ETDEWEB)

    Murray, Robynne [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-14

    Cavitation is an important consideration in the design of marine and hydrokinetic (MHK) turbines. The National Renewable Energy Laboratory's AeroDyn performance code was originally developed for horizontal-axis wind turbines and did not have the capability to predict cavitation inception. Therefore, AeroDyn has been updated to include the ability to predict cavitation on MHK turbines based on user-specified vapor pressure and submerged depth. This report outlines a verification of the AeroDyn V15.04 performance code for MHK turbines through a comparison to publicly available performance data.

  7. [Endoprosthesis Infections - Guidelines for Antibiotic Therapy Common Guidelines of the Czech Society for Orthopaedics and Traumatology and the Society for Infectious Diseases of the Czech Medical Association of J. E. Purkyně].

    Science.gov (United States)

    Musil, D; Balejová, M; Horníková, M; Chrdle, A; Mallátová, N; Nyč, O; Chmelík, V; Gallo, J; Jahoda, D; Stehlík, J

    2017-01-01

    PURPOSE OF THE STUDY This study aims to articulate regional guidelines for curative and suppressive antibiotic therapy of total joint replacement infections. MATERIAL AND METHODS When developing the standard, used as source materials were the published foreign guidelines for antibiotic therapy of prosthetic joint infections, the analysis of resistance of bacterial strains conducted in the Hospital in České Budějovice, a.s. and the assessment of strain resistance for the Czech Republic published by the European Antimicrobial Resistance Surveillance Network (EARS-Net). Considered was also the availability of individual antibiotics in the Czech Republic and restricted prescription according to the Summary of Product Characteristics as specified in the State Institute for Drug Control marketing authorisation. The expert group composed of orthopaedists, microbiologists and infectious disease specialists elaborated the basic antibiotic guideline for choosing an appropriate antibiotic/antifungal drug based on the usual susceptibility, its dose and dosage interval for initial and continuation therapy. The comments of individual specialists were gradually incorporated therein and in case of doubts majority rule was applied. The drafted document was sent for peer reviews to clinical orthopaedic, infectious disease and microbiological centres, whose comments were also incorporated and the finalised document was submitted for evaluation to specialised medical societies. RESULTS The outcome is the submitted guideline for antibiotic curative and suppressive therapy suitable for managing the prosthetic joint infections, which was approved by the committee of the Czech Society for Orthopaedics and Traumatology andthe Society for Infectious Diseases of the Czech Medical Association of J. E. Purkyně. DISCUSION Curative therapy of total joint replacement infections consists primarily in surgical treatment and has to be accompanied by adequate antibiotic therapy administered

  8. Interventional Spine and Pain Procedures in Patients on Antiplatelet and Anticoagulant Medications (Second Edition): Guidelines From the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, the American Academy of Pain Medicine, the International Neuromodulation Society, the North American Neuromodulation Society, and the World Institute of Pain.

    Science.gov (United States)

    Narouze, Samer; Benzon, Honorio T; Provenzano, David; Buvanendran, Asokumar; De Andres, José; Deer, Timothy; Rauck, Richard; Huntoon, Marc A

    2018-04-01

    The American Society of Regional Anesthesia and Pain Medicine (ASRA) 2012 survey of meeting attendees showed that existing ASRA anticoagulation guidelines for regional anesthesia were insufficient for their needs. Those surveyed agreed that procedure-specific and patient-specific factors required separate guidelines for pain and spine procedures. In response, a guidelines committee was formed. After preliminary review of published complications reports and studies, the committee stratified interventional spine and pain procedures according to potential bleeding risk: low-, intermediate-, and high-risk procedures. The ASRA regional anesthesia anticoagulation guidelines were largely deemed appropriate for the low- and intermediate-risk categories, but the high-risk category required further investigation. The first guidelines specific to interventional spine and pain procedures were published in 2015. Recent reviews evaluating bleeding complications in patients undergoing specific interventional pain procedures, the development of new regional anesthesia and acute pain guidelines, and the development of new anticoagulants and antiplatelet medications necessitate complementary updated guidelines. The authors desired coordination with the authors of the recently updated regional and acute pain anticoagulation guidelines. The latest evidence was sought through extensive database search strategies and the recommendations were evidence based when available and pharmacology driven otherwise. We could not provide strength and grading of these recommendations because there are not enough well-designed large studies concerning interventional pain procedures to support such grading. Although the guidelines could not always be based on randomized studies or on large numbers of patients from pooled databases, it is hoped that they will provide sound recommendations and the evidentiary basis for such recommendations. This publication is intended as a living document to be updated

  9. Evaluation of the impact of collaborative work by teams from the National Medical Residency Committee and the Brazilian Society of Neurosurgery. Retrospective and prospective study.

    Science.gov (United States)

    Santos, Renato Antunes Dos; Snell, Linda; Nunes, Maria do Patrocínio Tenório

    2016-04-01

    Training for specialist physicians in Brazil can take place in different ways. Closer liaison between institutions providing this training and assessment and health care services may improve qualifications. This article analyzes the impact of closer links and joint work by teams from the National Medical Residency Committee (Comissão Nacional de Residência Médica, CNRM) and the Brazilian Society of Neurosurgery (Sociedade Brasileira de Neurocirurgia, SBN) towards evaluating these programs. Retrospective and prospective study, conducted in a public university on a pilot project developed between CNRM and SBN for joint assessment of training programs across Brazil. The literature in the most relevant databases was reviewed. Documents and legislation produced by official government bodies were evaluated. Training locations were visited. Reports produced about residency programs were analyzed. Only 26% of the programs were immediately approved. The joint assessments found problems relating to teaching and to functioning of clinical service in 35% of the programs. The distribution of programs in this country has a strong relationship with the Human Development Index (HDI) of the regions and is very similar to the distribution of specialists. Closer collaboration between the SBN and CNRM had a positive impact on assessment of neurosurgery medical residency across the country. The low rates of direct approval have produced modifications and improvements to the quality of teaching and care (services). Closer links between the CNRM and other medical specialties have the capability to positively change the structure and function of specialty training in Brazil.

  10. Marketingový mix volejbalového klubu Aero Odolena Voda

    OpenAIRE

    Hons, Michal

    2013-01-01

    Title: Volleyball club Aero Odolena Voda marketing mix analysis Targets: To perform an overall evaluation of the current Aero Odolena Voda marketing mix, using SWOT analysis bring strenghts and weaknesses to light. Based on this analysis suggest possible modification that would lead to a better marketing mix. Methods: Using qualitative methods such as interview, alongside with quantitative methods such as questioning, SWOT analysis and using secundary dates. Results: The specific modification...

  11. A SERIES OF UNCOMMON FOREIGN BODIES PRESENTING IN THE AERO-DIGESTIVE TRACT

    Directory of Open Access Journals (Sweden)

    Jitendra Singh

    2016-02-01

    Full Text Available Foreign body impacted in the aero-digestive tract is one of the earliest reported problems. Coins, buttons, marbles, crayons, parts of toys etc. are the most commonly ingested foreign bodies in children. Fish, meat and chicken bones, dentures, nails etc.the most common foreign bodies ingested by adultsWe report a series of unusual foreign body ingestion in aero-digestive tract and their management by endoscopic retrieval.

  12. [Present situation and future prospects of the certification system for medical technologists--from the viewpoint of the Japanese Society of Clinical Cytology].

    Science.gov (United States)

    Hatakeyama, Shigeharu; Hirooka, Yasuaki

    2012-06-01

    The circumstances surrounding the certification examination for cytotechnologists in Japan are closely related with the history of the Japanese Society of Clinical Cytology. The examination for cytotechnologists is open only to medical technologists. The examination has two parts: primary and secondary. Qualification for candidacy for the secondary examination requires candidates to have passed the primary examination. The rate of successful applicants in the past 10 years was approximately 25-40%. Certified cytotechnologists are required to renew their qualifications every 4 years for their study and job history. I will present the purpose of the qualification update system, future themes, the reporting system for cytodiagnosis, and the possibility that the certification examination for cytotechnologists will become a national examination.

  13. THz waves: biological effects, industrial and medical applications. Meeting of the non-ionizing radiation section of the French radiation protection society (SFRP). Conference review

    International Nuclear Information System (INIS)

    Souques, M.; Magne, I.

    2011-01-01

    Following the debates about body scanners installed in airports for passengers security control, the non-ionizing radiations (NIR) section of the French radiation protection society (SFRP) has organized a conference day to take stock of the present day knowledge about the physical aspects and the biological effects of this frequency range as well as about their medical, and industrial applications (both civil and military). This document summarizes the content of the different presentations: THz spectro-imaging technique: status and perspectives (P. Mounaix); THz technology: seeing the invisible? (J.P. Caumes); interaction of millimeter waves with living material: from dosimetry to biological impacts (Y. Le Drean and M. Zhadobov); Tera-Hertz: biological and medical applications (G. Gallot); Tera-Hertz: standards and recommendations (B. Veyret); Biological applications of THz radiation: a review of events and a glance to the future (G.P. Gallerano); Industrial and military applications - liquids and solids detection in the THz domain (F. Garet); THz radiation and its civil and military applications - gas detection and quantifying (G. Mouret); Body scanners and civil aviation security (J.C. Guilpin). (J.S.)

  14. Academic Health Center Psychology Representation to the Council of Faculty and Academic Societies (CFAS) of the Association of American Medical Colleges (AAMC).

    Science.gov (United States)

    Cubic, Barbara A; Shaffer, Laura A

    2017-06-01

    This paper outlines the perspectives of the two currently appointed representatives of the Association of Psychologists in Academic Health Centers (APAHC) to the Council of Faculty and Academic Societies (CFAS) of the Association of American Medical Colleges (AAMC). The authors focus on why it is important for psychologists, especially those in academic health centers (AHCs), to be part of CFAS. The goal of the paper is to demonstrate how involvement in organizations like the AAMC helps AHC psychologists serve as ambassadors for psychology in AHCs and assists AHC psychologists in staying fluent regarding hot topics within academic medicine. The first author is a more senior member of APAHC, and so reflects the perspective of long-serving APAHC members; the second author reflects the perspectives of newer generations of APAHC members, those who have been active in APAHC for 10 years or less. The authors discuss their experiences being at national CFAS meetings. They describe meeting events including presentations such as those by national policy experts and scholars; and speed mentoring with medical residents from the AAMC Organization of Resident Representatives. Of special importance has been their opportunities for informal conversations with the AAMC's President and CEO, Board Chair, and Chief Public Policy Officer. They also have participated in networking functions that encourage interdisciplinary knowledge sharing and relationship building.

  15. The DAN-AERO MW experiments. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Aagaard Madsen, H.; Bak, C.; Schmidt Paulsen, U.; Gaunaa, M. (Risoe DTU, Roskilde (Denmark)); Fuglsang, P. (LM Glasfiber, Kolding (Denmark)); Romblad, J.; Olesen, N.A. (Vestas Wind Systems, Ringkoebing (Denmark)); Enevoldsen, P.; Laursen, J. (Siemens Wind Power, Ballerup (Denmark)); Jensen, Leo (DONG Energy, Fredericia (Denmark))

    2010-09-15

    This report describes the DAN-AERO MW experiments carried out within a collaborative, three years research project between Risoe DTU and the industrial partners LM Glasfiber, Siemens Wind Power, Vestas Wind Systems A/S and the utility company DONG Energy. The main objective of the project was to establish an experimental data base which can provide new insight into a number of fundamental aerodynamic and aero-acoustic issues, important for the design and operation of MW size turbines. The most important issue is the difference between airfoil characteristics measured under 2D, steady conditions in a wind tunnel and the unsteady 3D flow conditions on a rotor. The different transition characteristics might explain some of the differences between the 2D and 3D airfoil data and the experiments have been set up to provide data on this subject. The overall experimental approach has been to carry out a number of coordinated, innovative measurements on full scale MW size rotors as well as on airfoils for MW size turbines in wind tunnels. Shear and turbulence inflow characteristics were measured on a Siemens 3.6 MW turbine with a five hole pitot tube. Pressure and turbulent inflow characteristics were measured on a 2MW NM80 turbine with an 80 m rotor. One of the LM38.8 m blades on the rotor was replaced with a new LM38.8 m blade where instruments for surface pressure measurements at four radial sections were build into the blade during the blade production process. Additionally, the outmost section on the blade was further instrumented with around 50 microphones for high frequency surface pressure measurements. The surface pressure measurements have been correlated with inflow measurements from four five hole pitot tubes and two sensors for measuring the high frequency (50 Hz to10 kHz) contents of the inflow turbulence. In parallel, 2D wind tunnel measurements on common airfoils for wind turbine applications have been conducted in three different wind tunnels at Delft

  16. Autism Society

    Science.gov (United States)

    ... Español Improving the lives of all affected by autism. The Autism Society is the nation's leading grassroots ... more Improving the lives of all affected by autism. The Autism Society is the nation's leading grassroots ...

  17. Abridged version of the AWMF guideline for the medical clinical diagnostics of indoor mould exposure: S2K Guideline of the German Society of Hygiene, Environmental Medicine and Preventive Medicine (GHUP) in collaboration with the German Association of Allergists (AeDA), the German Society of Dermatology (DDG), the German Society for Allergology and Clinical Immunology (DGAKI), the German Society for Occupational and Environmental Medicine (DGAUM), the German Society for Hospital Hygiene (DGKH), the German Society for Pneumology and Respiratory Medicine (DGP), the German Mycological Society (DMykG), the Society for Pediatric Allergology and Environmental Medicine (GPA), the German Federal Association of Pediatric Pneumology (BAPP), and the Austrian Society for Medical Mycology (ÖGMM).

    Science.gov (United States)

    Wiesmüller, Gerhard A; Heinzow, Birger; Aurbach, Ute; Bergmann, Karl-Christian; Bufe, Albrecht; Buzina, Walter; Cornely, Oliver A; Engelhart, Steffen; Fischer, Guido; Gabrio, Thomas; Heinz, Werner; Herr, Caroline E W; Kleine-Tebbe, Jörg; Klimek, Ludger; Köberle, Martin; Lichtnecker, Herbert; Lob-Corzilius, Thomas; Merget, Rolf; Mülleneisen, Norbert; Nowak, Dennis; Rabe, Uta; Raulf, Monika; Seidl, Hans Peter; Steiß, Jens-Oliver; Szewszyk, Regine; Thomas, Peter; Valtanen, Kerttu; Hurraß, Julia

    2017-01-01

    This article is an abridged version of the AWMF mould guideline "Medical clinical diagnostics of indoor mould exposure" presented in April 2016 by the German Society of Hygiene, Environmental Medicine and Preventive Medicine ( Gesellschaft für Hygiene, Umweltmedizin und Präventivmedizin, GHUP ), in collaboration with the above-mentioned scientific medical societies, German and Austrian societies, medical associations and experts. Indoor mould growth is a potential health risk, even if a quantitative and/or causal relationship between the occurrence of individual mould species and health problems has yet to be established. Apart from allergic bronchopulmonary aspergillosis (ABPA) and mould-caused mycoses, only sufficient evidence for an association between moisture/mould damage and the following health effects has been established: allergic respiratory disease, asthma (manifestation, progression and exacerbation), allergic rhinitis, hypersensitivity pneumonitis (extrinsic allergic alveolitis), and increased likelihood of respiratory infections/bronchitis. In this context the sensitizing potential of moulds is obviously low compared to other environmental allergens. Recent studies show a comparatively low sensitizing prevalence of 3-10% in the general population across Europe. Limited or suspected evidence for an association exist with respect to mucous membrane irritation and atopic eczema (manifestation, progression and exacerbation). Inadequate or insufficient evidence for an association exist for chronic obstructive pulmonary disease, acute idiopathic pulmonary hemorrhage in children, rheumatism/arthritis, sarcoidosis and cancer. The risk of infection posed by moulds regularly occurring indoors is low for healthy persons; most species are in risk group 1 and a few in risk group 2 ( Aspergillus fumigatus, A. flavus ) of the German Biological Agents Act ( Biostoffverordnung ). Only moulds that are potentially able to form toxins can be triggers of toxic

  18. Experimental investigation on aero-optics of supersonic turbulent boundary layers.

    Science.gov (United States)

    Ding, Haolin; Yi, Shihe; Zhu, Yangzhu; He, Lin

    2017-09-20

    Nanoparticle-based planar laser scattering was used to measure the density distribution of the supersonic (Ma=3.0) turbulent boundary layer and the optical path difference (OPD), which is quite crucial for aero-optics study. Results were obtained using ray tracing. The influences of different layers in the boundary layer, turbulence scales, and light incident angle on aero-optics were examined, and the underlying flow physics were analyzed. The inner layer plays a dominant role, followed by the outer layer. One hundred OPD rms of the outer layer at different times satisfy the normal distribution better than that of the inner layer. Aero-optics induced by the outer layer is sensitive to the filter scale. When induced by the inner layer, it is not sensitive to the filter scale. The vortices with scales less than the Kolmogorov scale (=46.0  μm) have little influence on the aero-optics and could be ignored; the validity of the smallest optically active scale (=88.1  μm) proposed by Mani is verified, and vortices with scales less than that are ignored, resulting in a 1.62% decay of aero-optics; the filter with a width of 16-grid spacing (=182.4  μm) decreases OPD rms by 7.04%. With the increase of the angle between the wall-normal direction and the light-incident direction, the aero-optics becomes more serious, and the difference between the distribution of the OPD rms and the normal distribution increases. The difficulty of aero-optics correction is increased. Light tilted toward downstream experiences more distortions than when tilted toward upstream at the same angle relative to the wall-normal direction.

  19. Aero-methods and engineering research and development

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, R K

    1979-01-01

    There is presently a sharp, ongoing increase in the volume of work being conducted throughout the country associated with the development of natural gas fields as well as the resulting accelerated development of major gas trunklines. Aero-methods have presently found wide application in the engineering and planning of equipment for such projects. Success has been obtained by the increased quantity and quality of the available engineering information: The ''Giprospetsgaz'' Institute is using aerial photography as the basis for selecting pipeline routes and to more accurately determine the equipment requirements along proposed trunklines such as for compressors, gas transfer stations, electrical power substations, worker settlements, water and transport infrastructure and communications. These requirements are the most important factors in reducing capital operating expenditures. The greatest savings, in economic terms, can be achieved by avoiding sparsely settled or uninhabited areas as much as possible. Similiarly, aerial photography coupled with computer application aids in the solution of engineering problems. Third-generation computers are recommended for this process.

  20. Spatial-temporal-covariance-based modeling, analysis, and simulation of aero-optics wavefront aberrations.

    Science.gov (United States)

    Vogel, Curtis R; Tyler, Glenn A; Wittich, Donald J

    2014-07-01

    We introduce a framework for modeling, analysis, and simulation of aero-optics wavefront aberrations that is based on spatial-temporal covariance matrices extracted from wavefront sensor measurements. Within this framework, we present a quasi-homogeneous structure function to analyze nonhomogeneous, mildly anisotropic spatial random processes, and we use this structure function to show that phase aberrations arising in aero-optics are, for an important range of operating parameters, locally Kolmogorov. This strongly suggests that the d5/3 power law for adaptive optics (AO) deformable mirror fitting error, where d denotes actuator separation, holds for certain important aero-optics scenarios. This framework also allows us to compute bounds on AO servo lag error and predictive control error. In addition, it provides us with the means to accurately simulate AO systems for the mitigation of aero-effects, and it may provide insight into underlying physical processes associated with turbulent flow. The techniques introduced here are demonstrated using data obtained from the Airborne Aero-Optics Laboratory.

  1. Fault Diagnosis of Demountable Disk-Drum Aero-Engine Rotor Using Customized Multiwavelet Method

    Directory of Open Access Journals (Sweden)

    Jinglong Chen

    2015-10-01

    Full Text Available The demountable disk-drum aero-engine rotor is an important piece of equipment that greatly impacts the safe operation of aircraft. However, assembly looseness or crack fault has led to several unscheduled breakdowns and serious accidents. Thus, condition monitoring and fault diagnosis technique are required for identifying abnormal conditions. Customized ensemble multiwavelet method for aero-engine rotor condition identification, using measured vibration data, is developed in this paper. First, customized multiwavelet basis function with strong adaptivity is constructed via symmetric multiwavelet lifting scheme. Then vibration signal is processed by customized ensemble multiwavelet transform. Next, normalized information entropy of multiwavelet decomposition coefficients is computed to directly reflect and evaluate the condition. The proposed approach is first applied to fault detection of an experimental aero-engine rotor. Finally, the proposed approach is used in an engineering application, where it successfully identified the crack fault of a demountable disk-drum aero-engine rotor. The results show that the proposed method possesses excellent performance in fault detection of aero-engine rotor. Moreover, the robustness of the multiwavelet method against noise is also tested and verified by simulation and field experiments.

  2. Emergency ultrasound and echocardiography in patients with infarct-related cardiogenic shock : A survey among members of the German Society of Medical Intensive Care and Emergency Medicine.

    Science.gov (United States)

    Michels, G; Hempel, D; Pfister, R; Janssens, U

    2018-04-09

    Current international and national guidelines promote the use of emergency echocardiography in patients with cardiogenic shock. We assessed whether these recommendations are followed in clinical practice of infarct-related cardiogenic shock patients. For this purpose we conducted a web-based survey among all members of the German Society of Medical Intensive Care and Emergency Medicine (DGIIN); 40% of the DGIIN members completed the survey. Participants reported that in their department emergency echocardiography/ultrasound is performed on most patients in infarct-related cardiogenic shock presenting to the emergency department/chest pain unit or intensive care unit (58.6% versus 81.4%). Only 33% stated that on patients admitted directly to the catheterization laboratory emergency ultrasound/echocardiography is applied in their institution. Local availability of a standardized algorithm was lacking in the majority of departments (77.2%). A great proportion (38.3%) of participants stated that they personally had no formal training in emergency ultrasound. In order to meet the demands of the current guidelines, in addition to integration of ultrasound examinations into diagnostic algorithms, a structured training of all emergency and intensive care physicians is necessary.

  3. [A study for testing the antifungal susceptibility of yeast by the Japanese Society for Medical Mycology (JSMM) method. The proposal of the modified JSMM method 2009].

    Science.gov (United States)

    Nishiyama, Yayoi; Abe, Michiko; Ikeda, Reiko; Uno, Jun; Oguri, Toyoko; Shibuya, Kazutoshi; Maesaki, Shigefumi; Mohri, Shinobu; Yamada, Tsuyoshi; Ishibashi, Hiroko; Hasumi, Yayoi; Abe, Shigeru

    2010-01-01

    The Japanese Society for Medical Mycology (JSMM) method used for testing the antifungal susceptibility of yeast, the MIC end point for azole antifungal agents, is currently set at IC(80). It was recently shown, however that there is an inconsistency in the MIC value between the JSMM method and the CLSI M27-A2 (CLSI) method, in which the end- point was to read as IC(50). To resolve this discrepancy and reassess the JSMM method, the MIC for three azoles, fluconazole, itraconazole and voriconazole were compared to 5 strains of each of the following Candida species: C. albicans, C. glabrata, C. tropicalis, C. parapsilosis and C. krusei, for a total of 25 comparisons, using the JSMM method, a modified JSMM method, and the CLSI method. The results showed that when the MIC end- point criterion of the JSMM method was changed from IC(80) to IC(50) (the modified JSMM method) , the MIC value was consistent and compatible with the CLSI method. Finally, it should be emphasized that the JSMM method, using a spectrophotometer for MIC measurement, was superior in both stability and reproducibility, as compared to the CLSI method in which growth was assessed by visual observation.

  4. Mass Society

    DEFF Research Database (Denmark)

    Borch, Christian

    2017-01-01

    the negative features usually ascribed by late nineteenth-century crowd psychology to spontaneous crowds, and attributes these to the entire social fabric. However, in contrast to crowd psychology, theorists of mass society often place greater emphasis on how capitalism, technological advances, or demographic......Mass society is a societal diagnosis that emphasizes – usually in a pejorative, modernity critical manner – a series of traits allegedly associated with modern society, such as the leveling of individuality, moral decay, alienation, and isolation. As such, the notion of mass society generalizes...... developments condition such negative features, and some theorists argue that mass society produces a propensity to totalitarianism. Discussions of mass society culminated in the early and mid-twentieth century....

  5. Planetary Society

    Science.gov (United States)

    Murdin, P.

    2000-11-01

    Carl Sagan, Bruce Murray and Louis Friedman founded the non-profit Planetary Society in 1979 to advance the exploration of the solar system and to continue the search for extraterrestrial life. The Society has its headquarters in Pasadena, California, but is international in scope, with 100 000 members worldwide, making it the largest space interest group in the world. The Society funds a var...

  6. 75 FR 67639 - Airworthiness Directives; Piaggio Aero Industries S.p.A Model PIAGGIO P-180 Airplanes

    Science.gov (United States)

    2010-11-03

    ... Friday, except Federal holidays. For service information identified in this proposed AD, contact Piaggio... Piaggio Aero Industries have issued service information (referred to after this as ``the MCAI''), to... Information Piaggio Aero Industries S.p.A. has issued Service Bulletin (Mandatory) N.: SB 80-0275, Rev. N. 0...

  7. Numerical Investigation on Windback Seals Used in Aero Engines

    Directory of Open Access Journals (Sweden)

    Michael Flouros

    2018-01-01

    Full Text Available Seals are considered one of the most important flow elements in turbomachinery applications. The most traditional and widely known seal is the labyrinth seal but in recent years other types like the brush or carbon seals were introduced since they considerably reduce the sealing air consumption. When seals are used for sealing of aero engine bearing chambers they are subjected to high “bombardment” through oil particles which are present in the bearing chamber. These particles mainly result from the bearings as a consequence of the high rotational speeds. Particularly when carbon or brush seals are used, problems with carbon formation (coking may arise when oil gets trapped in the very tight gap of these seals. In order to prevent oil migration into the turbomachinery, particularly when the pressure difference over a seal is small or even negligible, significant improvement can be achieved through the introduction of so called windback seals. This seal has a row of static helical teeth (thread and below this thread a scalloped or smooth shaft section is rotating. Depending on the application, a windback seal can be used alone or as a combination with another seal (carbon, brush or labyrinth seal. A CFD analysis carried out with ANSYS CFX version 11 is presented in this paper with the aim to investigate this seal type. The simulations were performed by assuming a two-phase flow of air and oil in the bearing compartment. Design parameters like seal clearance, thread size, scallop width, were investigated at different operating conditions.

  8. SFC Optimization for Aero Engine Based on Hybrid GA-SQP Method

    Science.gov (United States)

    Li, Jie; Fan, Ding; Sreeram, Victor

    2013-12-01

    This study focuses on on-line specific fuel consumption (SFC) optimization of aero engines. For solving this optimization problem, a nonlinear pneumatic and thermodynamics model of the aero engine is built and a hybrid optimization technique which is formed by combining the genetic algorithm (GA) and the sequential quadratic programming (SQP) is presented. The ability of standard GA and standard SQP in solving this type of problem is investigated. It has been found that, although the SQP is fast, very little SFC reductions can be obtained. The GA is able to solve the problem well but a lot of computational time is needed. The presented hybrid GA-SQP gives a good SFC optimization effect and saves 76.6% computational time when compared to the standard GA. It has been shown that the hybrid GA-SQP is a more effective and higher real-time method for SFC on-line optimization of the aero engine.

  9. High-Temperature Adhesives for Thermally Stable Aero-Assist Technologies

    Science.gov (United States)

    Eberts, Kenneth; Ou, Runqing

    2013-01-01

    Aero-assist technologies are used to control the velocity of exploration vehicles (EVs) when entering Earth or other planetary atmospheres. Since entry of EVs in planetary atmospheres results in significant heating, thermally stable aero-assist technologies are required to avoid the high heating rates while maintaining low mass. Polymer adhesives are used in aero-assist structures because of the need for high flexibility and good bonding between layers of polymer films or fabrics. However, current polymer adhesives cannot withstand temperatures above 400 C. This innovation utilizes nanotechnology capabilities to address this need, leading to the development of high-temperature adhesives that exhibit high thermal conductivity in addition to increased thermal decomposition temperature. Enhanced thermal conductivity will help to dissipate heat quickly and effectively to avoid temperature rising to harmful levels. This, together with increased thermal decomposition temperature, will enable the adhesives to sustain transient high-temperature conditions.

  10. Transforming Society

    DEFF Research Database (Denmark)

    Enemark, Stig; Dahl Højgaard, Pia

    2017-01-01

    , was a result of transforming society from a feudal system to a capitalistic and market based economy. This story is interesting in itself - but it also provides a key to understanding the cadastral system of today. The system has evolved over time and now serves a whole range of functions in society. The paper...

  11. Problems of Aero-optics and Adaptive Optical Systems: Analytical Review

    Directory of Open Access Journals (Sweden)

    Yu. I. Shanin

    2017-01-01

    Full Text Available The analytical review gives the basic concepts of the aero-optics problem arising from the radiation propagation in the region of the boundary layers of a laser installation carrier aircraft. Estimates the radiation wave front distortions at its propagation in the near and far field. Presents main calculation approaches and methods to solve the gas-dynamic and optical problems in propagating laser radiation. Conducts a detailed analysis of the flows and their generating optical aberrations introduced by the aircraft turret (a projection platform of the on-board laser. Considers the effect of various factors (shock wave, difference in wall and flow temperatures on the flow pattern and the optical aberrations. Provides research data on the aero-optics obtained in the flying laboratory directly while in flight. Briefly considers the experimental research methods, diagnostic equipment, and synthesis of results while studying the aero-optics problem. Discusses some methods for mitigating the aerodynamic effects on the light propagation under flight conditions. Presents data about the passive, active, and hybrid effects on the flow in the boundary layers in order to reduce aberrations through improving the flow aerodynamics.The paper considers operation of adaptive optical systems under conditions of aero-optical distortions. Presents the study results concerning the reduction of the aero-optics effect on the characteristics of radiation in far field. Gives some research results regarding the effect on the efficiency of the adaptive system of a laser beam jitter and a time delay in the feedback signal transmission, which occur under application conditions. Provides data on adaptive correction of aero-optical wave fronts of radiation. Considers some application aspects in control systems of the on-board adaptive optics of adaptive filtration as a way to improve the efficiency of adaptive optical systems. The project in mind is to use obtained results

  12. Aero-MINE (Motionless INtegrated Energy) for Distributed Scalable Wind Power.

    Energy Technology Data Exchange (ETDEWEB)

    Houchens, Brent C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Blaylock, Myra L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-06-01

    The proposed Aero-MINE technology will extract energy from wind without any exterior moving parts. Aero-MINEs can be integrated into buildings or function stand-alone, and are scalable. This gives them advantages similar to solar panels, but with the added benefit of operation in cloudy or dark conditions. Furthermore, compared to solar panels, Aero-MINEs can be manufactured at lower cost and with less environmental impact. Power generation is isolated internally by the pneumatic transmission of air and the outlet air-jet nozzles amplify the effectiveness. Multiple units can be connected to one centrally located electric generator. Aero-MINEs are ideal for the built-environment, with numerous possible configurations ranging from architectural integration to modular bolt-on products. Traditional wind turbines suffer from many fundamental challenges. The fast-moving blades produce significant aero-acoustic noise, visual disturbances, light-induced flickering and impose wildlife mortality risks. The conversion of massive mechanical torque to electricity is a challenge for gears, generators and power conversion electronics. In addition, the installation, operation and maintenance of wind turbines is required at significant height. Furthermore, wind farms are often in remote locations far from dense regions of electricity customers. These technical and logistical challenges add significantly to the cost of the electricity produced by utility-scale wind farms. In contrast, distributed wind energy eliminates many of the logistical challenges. However, solutions such as micro-turbines produce relatively small amounts of energy due to the reduction in swept area and still suffer from the motion-related disadvantages of utility-scale turbines. Aero-MINEs combine the best features of distributed generation, while eliminating the disadvantages.

  13. Concept of the aero-train and its aerodynamic stability nature

    OpenAIRE

    Kohama, Yasuaki P.; Watanabe, Hideo; Kikuchi, Satoshi; Ota, Fukuo; Ito, Takatoshi; 小濱 泰昭; 渡部 英夫; 菊池 聡; 太田 福雄; 伊藤 高敏

    2000-01-01

    Taking into account the serious greenhouse effect of the earth, drastic proposal which prevents the carbon dioxide emission from transportation system must be done. In Japan, over 20 percent of the carbon dioxide are emitted from transportation. Aero-train is the new zero-emission high speed vehicle, which is being proposed. Wing in ground effect is introduced to obtain highest lift to drag ratio and highest payload ratio. In order to compare the performance of the aero-train at 500 km/h, wit...

  14. Identified state-space prediction model for aero-optical wavefronts

    Science.gov (United States)

    Faghihi, Azin; Tesch, Jonathan; Gibson, Steve

    2013-07-01

    A state-space disturbance model and associated prediction filter for aero-optical wavefronts are described. The model is computed by system identification from a sequence of wavefronts measured in an airborne laboratory. Estimates of the statistics and flow velocity of the wavefront data are shown and can be computed from the matrices in the state-space model without returning to the original data. Numerical results compare velocity values and power spectra computed from the identified state-space model with those computed from the aero-optical data.

  15. A definition for aggressive disease in patients with HER-2 negative metastatic breast cancer: an expert consensus of the Spanish Society of Medical Oncology (SEOM).

    Science.gov (United States)

    González, A; Lluch, A; Aba, E; Albanell, J; Antón, A; Álvarez, I; Ayala, F; Barnadas, A; Calvo, L; Ciruelos, E; Cortés, J; de la Haba, J; López-Vega, J M; Martínez, E; Muñoz, M; Peláez, I; Redondo, A; Rodríguez, Á; Rodríguez, C A; Ruíz, A; Llombart, A

    2017-05-01

    To converge on an expert opinion to define aggressive disease in patients with HER2-negative mBC using a modified Delphi methodology. A panel of 21 breast cancer experts from the Spanish Society of Medical Oncology agreed upon a survey which comprised 47 questions that were grouped into three sections: relevance for defining aggressive disease, aggressive disease criteria and therapeutic goals. Answers were rated using a 9-point Likert scale of relevance or agreement. Among the 88 oncologists that were invited to participate, 81 answered the first round (92%), 70 answered the second round (80%), and 67 answered the third round (76%) of the survey. There was strong agreement regarding the fact that identifying patients with aggressive disease needs to be adequately addressed to help practitioners to decide the best treatment options for patients with HER2-negative mBC. The factors that were considered to be strongly relevant to classifying patients with aggressive HER2-negative mBC were a high tumor burden, a disease-free interval of less than 12-24 months after surgery, the presence of progressive disease during adjuvant or neoadjuvant chemotherapy and having a triple-negative phenotype. The main therapeutic goals were controlling symptoms, improving quality of life and increasing the time to progression and overall survival. High tumor burden, time to recurrence after prior therapy and having a triple-negative phenotype were the prognostic factors for which the greatest consensus was found for identifying patients with aggressive HER2-negative mBC. Identifying patients with aggressive disease leads to different therapeutic approaches.

  16. Definition of medical event is to be based on the total source strength for evaluation of permanent prostate brachytherapy: A report from the American Society for Radiation Oncology.

    Science.gov (United States)

    Nag, Subir; Demanes, D Jeffrey; Hagan, Michael; Rivard, Mark J; Thomadsen, Bruce R; Welsh, James S; Williamson, Jeffrey F

    2011-10-01

    The Nuclear Regulatory Commission deems it to be a medical event (ME) if the total dose delivered differs from the prescribed dose by 20% or more. A dose-based definition of ME is not appropriate for permanent prostate brachytherapy as it generates too many spurious MEs and thereby creates unnecessary apprehension in patients, and ties up regulatory bodies and the licensees in unnecessary and burdensome investigations. A more suitable definition of ME is required for permanent prostate brachytherapy. The American Society for Radiation Oncology (ASTRO) formed a working group of experienced clinicians to review the literature, assess the validity of current regulations, and make specific recommendations about the definition of an ME in permanent prostate brachytherapy. The working group found that the current definition of ME in §35.3045 as "the total dose delivered differs from the prescribed dose by 20 percent or more" was not suitable for permanent prostate brachytherapy since the prostate volume (and hence the resultant calculated prostate dose) is dependent on the timing of the imaging, the imaging modality used, the observer variability in prostate contouring, the planning margins used, inadequacies of brachytherapy treatment planning systems to calculate tissue doses, and seed migration within and outside the prostate. If a dose-based definition for permanent implants is applied strictly, many properly executed implants would be improperly classified as an ME leading to a detrimental effect on brachytherapy. The working group found that a source strength-based criterion, of >20% of source strength prescribed in the post-procedure written directive being implanted outside the planning target volume is more appropriate for defining ME in permanent prostate brachytherapy. ASTRO recommends that the definition of ME for permanent prostate brachytherapy should not be dose based but should be based upon the source strength (air-kerma strength) administered.

  17. System Aero-Accelator for the purification of biodegradable effluents; Sistema aero-accelator para la depuracion de efluentes biodegradables (I)

    Energy Technology Data Exchange (ETDEWEB)

    Bosque Hernandez, J. L. del; Martin Sanchez, J. L. [Universidad de Salamanca (Spain)

    2000-07-01

    The contamination of the waters is one of the factors that contributes to the deterioration of our environment and since it is a very limited one its treatment descontaminant it is one of the politic's main objectives and environmental administration at all the levels, being spread to the total purification of the generated residual effluents. To reach this objective, big technological efforts are required that allow next to the creation of new processes, the adaptation of the processes existent depuratives, increasing the effectiveness of the same ones. One of the techniques of purification of possible recovery is the Compact System of active mires Aero-Accelator. Presently work is designed and it builds a plant pilot with Aero-Accelator geometry to study its behavior in the treatment of effluents of urban type with different loads pollutants. (Author) 16 refs.

  18. Civil Society

    Science.gov (United States)

    Social Media Facebook @oasofficial Facebook Twitter @oas_official Twitter Newsletters Documents OAS Technology Social Development Summits of the Americas Sustainable Development T Telecommunications Terrorism Tourism Trade Treaties and Agreements W Women Y Youth Strategic Partners Permanent Observers Civil Society

  19. A practice guideline from the American College of Medical Genetics and Genomics and the National Society of Genetic Counselors: referral indications for cancer predisposition assessment.

    Science.gov (United States)

    Hampel, Heather; Bennett, Robin L; Buchanan, Adam; Pearlman, Rachel; Wiesner, Georgia L

    2015-01-01

    The practice guidelines of the American College of Medical Genetics and Genomics (ACMG) and the National Society of Genetic Counselors (NSGC) are developed by members of the ACMG and NSGC to assist medical geneticists, genetic counselors, and other health-care providers in making decisions about appropriate management of genetic concerns, including access to and/or delivery of services. Each practice guideline focuses on a clinical or practice-based issue and is the result of a review and analysis of current professional literature believed to be reliable. As such, information and recommendations within the ACMG and NSGC joint practice guidelines reflect the current scientific and clinical knowledge at the time of publication, are current only as of their publication date, and are subject to change without notice as advances emerge. In addition, variations in practice, which take into account the needs of the individual patient and the resources and limitations unique to the institution or type of practice, may warrant approaches, treatments, and/or procedures that differ from the recommendations outlined in this guideline. Therefore, these recommendations should not be construed as dictating an exclusive course of management, nor does the use of such recommendations guarantee a particular outcome. Genetic counseling practice guidelines are never intended to displace a health-care provider's best medical judgment based on the clinical circumstances of a particular patient or patient population. Practice guidelines are published by the ACMG or the NSGC for educational and informational purposes only, and neither the ACMG nor the NSGC "approve" or "endorse" any specific methods, practices, or sources of information.Cancer genetic consultation is an important aspect of the care of individuals at increased risk of a hereditary cancer syndrome. Yet several patient, clinician, and system-level barriers hinder identification of individuals appropriate for cancer genetics

  20. General catalogue of products and services - geology. AERO data base; 2. ed; Catalogo geral de produtos e servicos - geologia. Base de dados AERO

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The catalogue in the second edition aims at presenting to the user a general idea on the aerogeophysical projects of Brazil database (AERO) which belongs to SIGA (Brazilian geological information system). The 151 documents (projects) are listed as follows: 52 projects performed by CPRM/DNPM - Departamento Nacional de Producao Mineral; 33 projects performed by CNEN - Commissao Nacional de Energia Nuclear and NUCLEBRAS; 7 projects executed by State government and private companies; and 59 projects executed for PETROBRAS 159 figs., 5 tabs.

  1. General catalogue of products and services - geology. AERO data base; 2. ed; Catalogo geral de produtos e servicos - geologia. Base de dados AERO

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The catalogue in the second edition aims at presenting to the user a general idea on the aerogeophysical projects of Brazil database (AERO) which belongs to SIGA (Brazilian geological information system). The 151 documents (projects) are listed as follows: 52 projects performed by CPRM/DNPM - Departamento Nacional de Producao Mineral; 33 projects performed by CNEN - Commissao Nacional de Energia Nuclear and NUCLEBRAS; 7 projects executed by State government and private companies; and 59 projects executed for PETROBRAS 159 figs., 5 tabs.

  2. The Application of Advanced Technique of Fan Frame Unit on High Bypass Ratio Aero Engine

    Directory of Open Access Journals (Sweden)

    Hou Peng

    2017-01-01

    Full Text Available High bypass ratio aero-engine was widely used on military and civil aviation domain, as the power of larger aircraft. Fan frame unit was the main bearing frame of high bypass ratio aero-engine, which composed of strut, HUB MID BOX and external bypass parts. Resin/composite was used on external bypass parts(acoustic liner, containment ring, fan outlet guide vane and fan case skin fillets, which not only reduced the weight and manufacturing cost, but also improved the noise absorption, containment and anti-fatigue ability of engine. The design of composite was becoming a key technique for high bypass ratio aero-engine. In special test of the core engine, nitrogen cooling system was designed to cool the cavity of spool. The nitrogen pipeline passed through the inner cavity of fan frame, then inserted into NO. 3 bearing seal, so nitrogen gas was sent into the cavity of core engine spool. On high bypass ratio aero-engine, the external bypass and fan frame inner cavity were the design platform for advanced technique, such as composite and pipeline system, and also provided guarantee for reliable operation of engine.

  3. Performance of small-scale aero-derivative industrial gas turbines derived from helicopter engines

    Directory of Open Access Journals (Sweden)

    Barinyima Nkoi

    2013-12-01

    Full Text Available This paper considers comparative assessment of simple and advanced cycle small-scale aero-derivative industrial gas turbines derived from helicopter engines. More particularly, investigation was made of technical performance of the small-scale aero-derivative engine cycles based on existing and projected cycles for applications in industrial power generation, combined heat and power concept, rotating equipment driving, and/or allied processes. The investigation was done by carrying out preliminary design and performance simulation of a simple cycle (baseline two-spool small-scale aero-derivative turboshaft engine model, and some advanced counterpart aero-derivative configurations. The advanced configurations consist of recuperated and intercooled/recuperated engine cycles of same nominal power rating of 1.567 MW. The baseline model was derived from the conversion of an existing helicopter engine model. In doing so, design point and off-design point performances of the engine models were established. In comparing their performances, it was observed that to a large extent, the advanced engine cycles showed superior performance in terms of thermal efficiency, and specific fuel consumption. In numerical terms, thermal efficiencies of recuperated engine cycle, and intercooled/recuperated engine cycles, over the simple cycle at DP increased by 13.5%, and 14.5% respectively, whereas specific fuel consumption of these cycles over simple cycle at DP decreased by 12.5%, and 13% respectively. This research relied on open access public literature for data.

  4. FJ44 Turbofan Engine Test at NASA Glenn Research Center's Aero-Acoustic Propulsion Laboratory

    Science.gov (United States)

    Lauer, Joel T.; McAllister, Joseph; Loew, Raymond A.; Sutliff, Daniel L.; Harley, Thomas C.

    2009-01-01

    A Williams International FJ44-3A 3000-lb thrust class turbofan engine was tested in the NASA Glenn Research Center s Aero-Acoustic Propulsion Laboratory. This report presents the test set-up and documents the test conditions. Farfield directivity, in-duct unsteady pressures, duct mode data, and phased-array data were taken and are reported separately.

  5. 78 FR 1776 - Airworthiness Directives; International Aero Engines AG Turbofan Engines

    Science.gov (United States)

    2013-01-09

    ... Engines AG Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... Aero Engines AG (IAE), V2525-D5 and V2528-D5 turbofan engines, with a certain number (No.) 4 bearing... proposed AD. Discussion We received a report of a fire warning on an IAE V2525 turbofan engine shortly...

  6. Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines

    DEFF Research Database (Denmark)

    Kallesøe, Bjarne Skovmose

    This report present results from the PSO project 2008-1-10092 entitled Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines that deals with measurements, modelling and simulations of the world’s first combined wave and wind energy platform. The floating energy...

  7. AERO: A Decision Support Tool for Wind Erosion Assessment in Rangelands and Croplands

    Science.gov (United States)

    Galloza, M.; Webb, N.; Herrick, J.

    2015-12-01

    Wind erosion is a key driver of global land degradation, with on- and off-site impacts on agricultural production, air quality, ecosystem services and climate. Measuring rates of wind erosion and dust emission across land use and land cover types is important for quantifying the impacts and identifying and testing practical management options. This process can be assisted by the application of predictive models, which can be a powerful tool for land management agencies. The Aeolian EROsion (AERO) model, a wind erosion and dust emission model interface provides access by non-expert land managers to a sophisticated wind erosion decision-support tool. AERO incorporates land surface processes and sediment transport equations from existing wind erosion models and was designed for application with available national long-term monitoring datasets (e.g. USDI BLM Assessment, Inventory and Monitoring, USDA NRCS Natural Resources Inventory) and monitoring protocols. Ongoing AERO model calibration and validation are supported by geographically diverse data on wind erosion rates and land surface conditions collected by the new National Wind Erosion Research Network. Here we present the new AERO interface, describe parameterization of the underpinning wind erosion model, and provide a summary of the model applications across agricultural lands and rangelands in the United States.

  8. Dependence of AeroMACS Interference on Airport Radiation Pattern Characteristics

    Science.gov (United States)

    Wilson, Jeffrey D.

    2012-01-01

    AeroMACS (Aeronautical Mobile Airport Communications System), which is based upon the IEEE 802.16e mobile wireless standard, is expected to be implemented in the 5091 to 5150 MHz frequency band. As this band is also occupied by Mobile Satellite Service (MSS) feeder uplinks, AeroMACS must be designed to avoid interference with this incumbent service. The aspects of AeroMACS operation that present potential interference are under analysis in order to enable the definition of standards that assure that such interference will be avoided. In this study, the cumulative interference power distribution at low earth orbit from AeroMACS transmitters at the 497 major airports in the contiguous United States was simulated with the Visualyse Professional software. The dependence of the interference power on the number of antenna beams per airport, gain patterns, and beam direction orientations was simulated. As a function of these parameters, the simulation results are presented in terms of the limitations on transmitter power required to maintain the cumulative interference power under the established threshold.

  9. Blades Forced Vibration Under Aero-Elastic Excitation Modeled by Van der Pol

    Czech Academy of Sciences Publication Activity Database

    Půst, Ladislav; Pešek, Luděk

    2017-01-01

    Roč. 27, č. 11 (2017), č. článku 1750166. ISSN 0218-1274 R&D Projects: GA ČR GA16-04546S Institutional support: RVO:61388998 Keywords : ade vibration * aero-elastic force * self-excitation * van der Pol Subject RIV: BI - Acoustics OBOR OECD: Applied mechanics Impact factor: 1.329, year: 2016

  10. Improving Aerospace Engineering Students' Achievements by an Open Aero Control Experiment Apparatus

    Science.gov (United States)

    Zeng, QingHua; Zhang, WeiHua; Huang, ZheZhi; Dong, RongHua

    2014-01-01

    This paper describes the development of an aero control experiment apparatus (ACEA) for use in aerospace control practical courses. The ACEA incorporates a systematic multihierarchy learning and teaching method, and was designed to improve aerospace engineering students' understanding of unmanned aerial vehicle (UAV) control systems. It offers a…

  11. Current issues in medically assisted reproduction and genetics in Europe: research, clinical practice, ethics, legal issues and policy. European Society of Human Genetics and European Society of Human Reproduction and Embryology.

    Science.gov (United States)

    Harper, Joyce C; Geraedts, Joep; Borry, Pascal; Cornel, Martina C; Dondorp, Wybo; Gianaroli, Luca; Harton, Gary; Milachich, Tanya; Kääriäinen, Helena; Liebaers, Inge; Morris, Michael; Sequeiros, Jorge; Sermon, Karen; Shenfield, Françoise; Skirton, Heather; Soini, Sirpa; Spits, Claudia; Veiga, Anna; Vermeesch, Joris Robert; Viville, Stéphane; de Wert, Guido; Macek, Milan

    2013-11-01

    In March 2005, a group of experts from the European Society of Human Genetics and European Society of Human Reproduction and Embryology met to discuss the interface between genetics and assisted reproductive technology (ART), and published an extended background paper, recommendations and two Editorials. Seven years later, in March 2012, a follow-up interdisciplinary workshop was held, involving representatives of both professional societies, including experts from the European Union Eurogentest2 Coordination Action Project. The main goal of this meeting was to discuss developments at the interface between clinical genetics and ARTs. As more genetic causes of reproductive failure are now recognised and an increasing number of patients undergo testing of their genome before conception, either in regular health care or in the context of direct-to-consumer testing, the need for genetic counselling and preimplantation genetic diagnosis (PGD) may increase. Preimplantation genetic screening (PGS) thus far does not have evidence from randomised clinical trials to substantiate that the technique is both effective and efficient. Whole-genome sequencing may create greater challenges both in the technological and interpretational domains, and requires further reflection about the ethics of genetic testing in ART and PGD/PGS. Diagnostic laboratories should be reporting their results according to internationally accepted accreditation standards (International Standards Organisation - ISO 15189). Further studies are needed in order to address issues related to the impact of ART on epigenetic reprogramming of the early embryo. The legal landscape regarding assisted reproduction is evolving but still remains very heterogeneous and often contradictory. The lack of legal harmonisation and uneven access to infertility treatment and PGD/PGS fosters considerable cross-border reproductive care in Europe and beyond. The aim of this paper is to complement previous publications and provide

  12. Network Society

    DEFF Research Database (Denmark)

    Clausen, Lars; Tække, Jesper

    2017-01-01

    the five strands of theory on the network society. Each theoretical position has its specific implications for acting toward strategic goals. In its entirety, the five perspectives give a thorough understanding of the conditions for successful strategic communication in the 21st century....

  13. Network Society

    DEFF Research Database (Denmark)

    Clausen, Lars; Tække, Jesper

    2018-01-01

    the five strands of theory on the network society. Each theoretical position has its specific implications for acting toward strategic goals. In its entirety, the five perspectives give a thorough understanding of the conditions for successful strategic communication in the 21st century....

  14. Die Zukunft der ärztlichen Weiterbildung in Deutschland – Positionspapier des Ausschusses Weiterbildung der Gesellschaft für Medizinische Ausbildung (GMA [The future of graduate medical education in Germany – Position paper of the committee on graduate medical education of the Society for Medical Education (GMA

    Directory of Open Access Journals (Sweden)

    Weih, Markus

    2013-05-01

    Full Text Available [english] The German graduate medical education system is going through an important phase of changes. Besides the ongoing reform of the national guidelines for graduate medical education (Musterweiterbildungsordnung, other factors like societal and demographic changes, health and research policy reforms also play a central role for the future and competitiveness of graduate medical education.With this position paper, the committee on graduate medical education of the Society for Medical Education (GMA would like to point out some central questions for this process and support the current discourse.As an interprofessional and interdisciplinary scientific society, the GMA has the resources to contribute in a meaningful way to an evidence-based and future-oriented graduate medical education strategy.In this position paper, we use four key questions with regards to educational goals, quality assurance, teaching competence and policy requirements to address the core issues for the future of graduate medical education in Germany. The GMA sees its task in contributing to the necessary reform processes as the only German speaking scientific society in the field of medical education.[german] Die ärztliche Weiterbildung in Deutschland befindet sich im Umbruch. Neben der aktuellen Reform der Musterweiterbildungsordnung spielen gesellschaftliche, demographische, gesundheits- und forschungspolitische Faktoren eine wichtige Rolle für die Zukunft und Konkurrenzfähigkeit der ärztlichen Weiterbildung.Der Ausschuss für Weiterbildung der Gesellschaft für Medizinische Ausbildung (GMA möchte mit diesem Positionspapier auf zentrale Fragen in diesem Prozess aufmerksam machen und Impulse für den aktuellen Diskurs geben.Dabei kann die GMA als interdisziplinäre und interprofessionelle Fachgesellschaft wichtige Beiträge zu einer evidenzbasierten und zukunftsorientierten Weiterbildungsstrategie liefern.Im vorliegenden Papier werden anhand von vier Leitfragen zu

  15. Understanding Aero-Fractures using optics and acoustics

    Science.gov (United States)

    Turkaya, Semih; Toussaint, Renaud; Kvalheim Eriksen, Fredrik; Zecevic, Megan; Daniel, Guillaume; Grude Flekkøy, Eirik; Jørgen Måløy, Knut

    2016-04-01

    exponent p value around 0.5. An analytical model of overpressure diffusion predicting p = 0.5 and two other free parameters of the Omori Law (prefactor and origin time) is developed. The spatial density of the seismic events, and the time of end of formation of the channels can also be predicted using this developed model. Using direct simulations of acoustic emissions due to the air vibration in opening fractal cavities, the evolution in the power spectrum is investigated. 1. Turkaya S, Toussaint R, Eriksen FK, Zecevic M, Daniel G, Flekkøy EG, Måløy KJ. "Bridging aero-fracture evolution with the characteristics of the acoustic emissions in a porous medium." Front. Phys.3:70. 2015 doi: 10.3389/fphy.2015.00070

  16. Smart Rotor Modeling: Aero-Servo-Elastic Modeling of a Smart Rotor with Adaptive Trailing Edge Flaps

    DEFF Research Database (Denmark)

    Bergami, Leonardo

    the trailing edge flap deflection to actively reduce the fatigue loads on the structure. The performance of the smart rotor configuration and its control algorithms are finally quantified by aero-servo-elastic simulations of the smart rotor turbine operating in a standard turbulent wind field.......This book presents the formulation of an aero-servo-elastic model for a wind turbine rotor equipped with Adaptive Trailing Edge Flaps (ATEF), a smart rotor configuration. As the name suggests, an aero-servo-elastic model consists of three main components: an aerodynamic model, a structural model......, and a control model. The book first presents an engineering type of aerodynamic model that accounts for the dynamic effects of flap deflection. The aerodynamic model is implemented in a Blade Element Momentum framework, and coupled with a multi-body structural model in the aero-servoelastic simulation code HAWC...

  17. Fusing Simulation Results From Multifidelity Aero-servo-elastic Simulators - Application To Extreme Loads On Wind Turbine

    DEFF Research Database (Denmark)

    Abdallah, Imad; Sudret, Bruno; Lataniotis, Christos

    2015-01-01

    Fusing predictions from multiple simulators in the early stages of the conceptual design of a wind turbine results in reduction in model uncertainty and risk mitigation. Aero-servo-elastic is a term that refers to the coupling of wind inflow, aerodynamics, structural dynamics and controls. Fusing...... the response data from multiple aero-servo-elastic simulators could provide better predictive ability than using any single simulator. The co-Kriging approach to fuse information from multifidelity aero-servo-elastic simulators is presented. We illustrate the co-Kriging approach to fuse the extreme flapwise...... bending moment at the blade root of a large wind turbine as a function of wind speed, turbulence and shear exponent in the presence of model uncertainty and non-stationary noise in the output. The extreme responses are obtained by two widely accepted numerical aero-servo-elastic simulators, FAST...

  18. Response types and general stability conditions of linear aero-elastic system with two degrees-of-freedom

    Czech Academy of Sciences Publication Activity Database

    Náprstek, Jiří; Pospíšil, Stanislav

    2012-01-01

    Roč. 111, č. 1 (2012), s. 1-13 ISSN 0167-6105 R&D Projects: GA ČR(CZ) GA103/09/0094; GA AV ČR(CZ) IAA200710902 Institutional support: RVO:68378297 Keywords : aero-elastic system * self-excited vibration * instability * aero-elastic derivatives Subject RIV: JN - Civil Engineering Impact factor: 1.342, year: 2012

  19. Cryptozoology Society

    Science.gov (United States)

    Richman, Barbara T.

    Reports of Loch Ness monsters, Bigfoot, and the Yeti spring u p from time to time, sparking scientific controversy about the veracity of these observations. Now an organization has been established to help cull, analyze, and disseminate information on the alleged creatures. The International Society of Cryptozoology, formed at a January meeting at the U.S. National Museum of Natural History of the Smithsonian Institution, will serve as the focal point for the investigation, analysis, publication, and discussion of animals of unexpected form or size or of unexpected occurrences in time or space.

  20. Guideline on allergen-specific immunotherapy in IgE-mediated allergic diseases: S2k Guideline of the German Society for Allergology and Clinical Immunology (DGAKI), the Society for Pediatric Allergy and Environmental Medicine (GPA), the Medical Association of German Allergologists (AeDA), the Austrian Society for Allergy and Immunology (ÖGAI), the Swiss Society for Allergy and Immunology (SGAI), the German Society of Dermatology (DDG), the German Society of Oto- Rhino-Laryngology, Head and Neck Surgery (DGHNO-KHC), the German Society of Pediatrics and Adolescent Medicine (DGKJ), the Society for Pediatric Pneumology (GPP), the German Respiratory Society (DGP), the German Association of ENT Surgeons (BV-HNO), the Professional Federation of Paediatricians and Youth Doctors (BVKJ), the Federal Association of Pulmonologists (BDP) and the German Dermatologists Association (BVDD).

    Science.gov (United States)

    Pfaar, Oliver; Bachert, Claus; Bufe, Albrecht; Buhl, Roland; Ebner, Christof; Eng, Peter; Friedrichs, Frank; Fuchs, Thomas; Hamelmann, Eckard; Hartwig-Bade, Doris; Hering, Thomas; Huttegger, Isidor; Jung, Kirsten; Klimek, Ludger; Kopp, Matthias Volkmar; Merk, Hans; Rabe, Uta; Saloga, Joachim; Schmid-Grendelmeier, Peter; Schuster, Antje; Schwerk, Nicolaus; Sitter, Helmut; Umpfenbach, Ulrich; Wedi, Bettina; Wöhrl, Stefan; Worm, Margitta; Kleine-Tebbe, Jörg; Kaul, Susanne; Schwalfenberg, Anja

    The present guideline (S2k) on allergen-specific immunotherapy (AIT) was established by the German, Austrian and Swiss professional associations for allergy in consensus with the scientific specialist societies and professional associations in the fields of otolaryngology, dermatology and venereology, pediatric and adolescent medicine, pneumology as well as a German patient organization (German Allergy and Asthma Association; Deutscher Allergie- und Asthmabund, DAAB) according to the criteria of the Association of the Scientific Medical Societies in Germany (Arbeitsgemeinschaft der Wissenschaftlichen Medizinischen Fachgesellschaften, AWMF). AIT is a therapy with disease-modifying effects. By administering allergen extracts, specific blocking antibodies, toler-ance-inducing cells and mediators are activated. These prevent further exacerbation of the allergen-triggered immune response, block the specific immune response and attenuate the inflammatory response in tissue. Products for SCIT or SLIT cannot be compared at present due to their heterogeneous composition, nor can allergen concentrations given by different manufacturers be compared meaningfully due to the varying methods used to measure their active ingredients. Non-modified allergens are used for SCIT in the form of aqueous or physically adsorbed (depot) extracts, as well as chemically modified allergens (allergoids) as depot extracts. Allergen extracts for SLIT are used in the form of aqueous solutions or tablets. The clinical efficacy of AIT is measured using various scores as primary and secondary study endpoints. The EMA stipulates combined symptom and medication scores as primary endpoint. A harmonization of clinical endpoints, e. g., by using the combined symptom and medication scores (CSMS) recommended by the EAACI, is desirable in the future in order to permit the comparison of results from different studies. The current CONSORT recommendations from the ARIA/GA2LEN group specify standards for the

  1. Clinical Pharmacology in Denmark in 2016 - 40 Years with the Danish Society of Clinical Pharmacology and 20 Years as a Medical Speciality

    DEFF Research Database (Denmark)

    Brøsen, Kim; Andersen, Stig Ejdrup; Borregaard, Jeanett

    2016-01-01

    new jobs and career opportunities for clinical pharmacologists. As of July 2016, the Danish Society of Clinical Pharmacology has 175 members, and 70 of these are specialists in clinical pharmacology corresponding to approximately 2.5 specialists per 1000 doctors (Denmark has in total 28,000 doctors...

  2. Descentralización del sector de salud y conflictos con el gremio médico en México Health sector decentralization and divergences with the medical society in Mexico

    Directory of Open Access Journals (Sweden)

    Raquel Abrantes Pêgo

    2002-06-01

    Full Text Available OBJETIVO: Investigar la percepción y acción del gremio médico en el marco de la descentralización del Sector de Salud en dos estados de México, Guanajuato y Sonora. MÉTODOS: Se han utilizado técnicas cualitativas de investigación. Fueron realizadas 35 entrevistas, semiestructuradas, en total entre los dos estados, a médicos colegiados, Guanajuato y Sonora, tanto de instituciones públicas como privadas y representantes de las asociaciones gremiales y sindicales. RESULTADOS: Para el gremio médico de los dos estados investigados, la descentralización ha implicado en inseguridad, como resultado de la falta de claridad en la regulación del Sector de Salud. La acción de los Colegios de Médicos de ambos estados, se tradujo en una mayor politización de los Colegios de Médicos estatales, en la elaboración de propuestas con el objetivo de incidir en el control del mercado laboral médico de dichos estados y participación en la estructura de poder regional. CONCLUSIONES: La investigación comprueba una readaptación del gremio médico en el ámbito regional, indicando su permanencia como grupo de poder. Contrariamente a lo que informa la literatura estadounidense en México, los médicos han logrado influenciar en la regulación, con la finalidad de no perder su status privilegiado dentro de la competencia existente.OBJECTIVE: To evaluate the medical society's perception and actions in the context of health sector decentralization in the states of Guanajuato and Sonora, Mexico. METHODS: Qualitative research techniques were applied. Thirty-five semi-structured interviews were conducted with medical college members of both public and private institutions, and collegiate and union representatives of both states studied. RESULTS: Members of medical society in both states acknowledged that decentralization implied in insecurity due to the lack of clarity of health sector regulations. As a result of actions of the medical college in both

  3. Clinical relevance of molecular diagnostics in gastrointestinal (GI) cancer: European Society of Digestive Oncology (ESDO) expert discussion and recommendations from the 17th European Society for Medical Oncology (ESMO)/World Congress on Gastrointestinal Cancer, Barcelona.

    Science.gov (United States)

    Baraniskin, Alexander; Van Laethem, Jean-Luc; Wyrwicz, Lucjan; Guller, Ulrich; Wasan, Harpreet S; Matysiak-Budnik, Tamara; Gruenberger, Thomas; Ducreux, Michel; Carneiro, Fatima; Van Cutsem, Eric; Seufferlein, Thomas; Schmiegel, Wolff

    2017-11-01

    In the epoch of precision medicine and personalised oncology, which aims to deliver the right treatment to the right patient, molecular genetic biomarkers are a topic of growing interest. The aim of this expert discussion and position paper is to review the current status of various molecular tests for gastrointestinal (GI) cancers and especially considering their significance for the clinical routine use. Opinion leaders and experts from diverse nationalities selected on scientific merit were asked to answer to a prepared set of questions about the current status of molecular diagnostics in different GI cancers. All answers were then discussed during a plenary session and reported here in providing a well-balanced reflection of both clinical expertise and updated evidence-based medicine. Preselected molecular genetic biomarkers that are described and disputed in the current medical literature in different GI cancers were debated, and recommendations for clinical routine practice were made whenever possible. Furthermore, the preanalytical variations were commented and proposals for quality controls of biospecimens were made. The current article summarises the recommendations of the expert committee regarding prognostic and predictive molecular genetic biomarkers in different entities of GI cancers. The briefly and comprehensively formulated guidelines should assist clinicians in the process of decision making in daily clinical practice. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Global Mobile Satellite Service Interference Analysis for the AeroMACS

    Science.gov (United States)

    Wilson, Jeffrey D.; Apaza, Rafael D.; Hall, Ward; Phillips, Brent

    2013-01-01

    The AeroMACS (Aeronautical Mobile Airport Communications System), which is based on the IEEE 802.16-2009 mobile wireless standard, is envisioned as the wireless network which will cover all areas of airport surfaces for next generation air transportation. It is expected to be implemented in the 5091-5150 MHz frequency band which is also occupied by mobile satellite service uplinks. Thus the AeroMACS must be designed to avoid interference with this incumbent service. Simulations using Visualyse software were performed utilizing a global database of 6207 airports. Variations in base station and subscriber antenna distribution and gain pattern were examined. Based on these simulations, recommendations for global airport base station and subscriber antenna power transmission limitations are provided.

  5. Multimedia in physics education: teaching videos about aero and fluid dynamics

    International Nuclear Information System (INIS)

    Wagner, Andreas; Altherr, Stefan; Eckert, Bodo; Jodl, Hans Joerg

    2007-01-01

    In a series of letters, we present teaching videos on topics which are difficult to understand for students, or which are difficult to realize experimentally in school, if at all. These videos can be used for quantitative analysis or visualization of phenomena. Here we present videos on aero and fluid dynamics which deal with the Navier-Stokes equation, the continuity equation and Karman's vortex street. (letters and comments)

  6. Qualification of Indigenously Developed Special Coatings for Aero-Engine Components

    OpenAIRE

    V. Sambasiva Rao; T. Rangaraju; V. Unnikrishnan

    1999-01-01

    The demand for higher performance and reliability of aero-engiaes necessitates its components to worksatisfactorily under severe operating conditions. The durability of various components in these environmentis often enhanced by applying suitable coatings. The development of new materials/processing methods andalso various coatings to protect the components have been driven by the ever-increasing severity of theaero-engine internal environment. While the selection of a coating is dictated by ...

  7. 76 FR 82202 - Airworthiness Directives; International Aero Engines AG Turbofan Engines

    Science.gov (United States)

    2011-12-30

    ... Engines AG Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... International Aero Engines AG (IAE) V2500-A1, V2525-D5 and V2528-D5 turbofan engines, and certain serial numbers (S/Ns) of IAE V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, and V2533-A5 turbofan...

  8. Results of a WINGDES2/AERO2S Flap Optimization for the TCA

    Science.gov (United States)

    Yaros, Steven F.

    1999-01-01

    The codes WINGDES2 and AERO2S were easy to obtain, and technical help was readily available. The codes have a long, well-documented history of successful optimizations of various aircraft configurations. The codes were easy to use, although specification of input data was time-consuming. The Run times were short, allowing the many runs necessary for the Suction Parameter matrix to be accomplished within a day or two. The results of the optimization appear to be reasonable.

  9. Aero-elastic stability of airfoil flow using 2-D CFD

    Energy Technology Data Exchange (ETDEWEB)

    Johansen, J [Risoe National Lab., Roskilde (Denmark)

    1999-03-01

    A three degrees-of-freedom structural dynamics model has been coupled to a two-dimensional incompressible CFD code. The numerical investigation considers aero-elastic stability for two different airfoils; the NACA0012 and the LM 2 18 % airfoils. Stable and unstable configurations and limit cycle oscillations are predicted in accordance with literature for the first airfoil. An attempt to predict stall induced edge-wise vibrations on a wind turbine airfoil fails using this two-dimensional approach. (au)

  10. Role of offending out-door aero-allergen and CD14 C(-159)T ...

    African Journals Online (AJOL)

    Child- hood-onset and adult-onset of asthma showed significant difference in allergen sensitivity as well as genetic background with respect to CD14 polymorphism. Keywords: Asthma, aero-allergen, skin prick test, total IgE, CD14 gene polymorphism. DOI: https://dx.doi.org/10.4314/ahs.v17i4.18. Cite as: Dutta S, Mondal P, ...

  11. General catalogue of products and services - geology. AERO data base. 2. ed.

    International Nuclear Information System (INIS)

    1995-01-01

    The catalogue in the second edition aims at presenting to the user a general idea on the aerogeophysical projects of Brazil database (AERO) which belongs to SIGA (Brazilian geological information system). The 151 documents (projects) are listed as follows: 52 projects performed by CPRM/DNPM - Departamento Nacional de Producao Mineral; 33 projects performed by CNEN - Commissao Nacional de Energia Nuclear and NUCLEBRAS; 7 projects executed by State government and private companies; and 59 projects executed for PETROBRAS

  12. Practice in multi-disciplinary computing. Transonic aero-structural dynamics of semi-monocoque wing

    International Nuclear Information System (INIS)

    Onishi, Ryoichi; Guo, Zhihong; Kimura, Toshiya; Iwamiya, Toshiyuki

    2000-01-01

    Japan Atomic Energy Research Institute is currently involved in expanding the application areas of its distributed parallel computing facility. One of the most anticipated areas of applications is multi-disciplinary interaction problem. This paper introduces the status quo of the system for fluid-structural interaction analysis on the institute's parallel computers by exploring multi-disciplinary engineering methodology. Current application is focused on a transonic aero-elastic analysis of a three dimensional wing. The distinctive features of the system are: (1) Simultaneous executions of fluid and structural codes by exploiting distributed-and-parallel processing technologies. (2) Construction of a computational fluid (aero)-structural dynamics model which combines flow-field grid with a wing structure composed of the external surface and the internal reinforcements. The purpose of this paper is to summarize the basic concepts, analytical methods, and their implementations along with the computed aero-structural properties of a swept-back wing at March, 7 flow condition. (author)

  13. Numerical study of aero-excitation of steam-turbine rotor blade self-oscillations

    Science.gov (United States)

    Galaev, S. A.; Makhnov, V. Yu.; Ris, V. V.; Smirnov, E. M.

    2018-05-01

    Blade aero-excitation increment is evaluated by numerical solution of the full 3D unsteady Reynolds-averaged Navier-Stokes equations governing wet steam flow in a powerful steam-turbine last stage. The equilibrium wet steam model was adopted. Blade surfaces oscillations are defined by eigen-modes of a row of blades bounded by a shroud. Grid dependency study was performed with a reduced model being a set of blades multiple an eigen-mode nodal diameter. All other computations were carried out for the entire blade row. Two cases are considered, with an original-blade row and with a row of modified (reinforced) blades. Influence of eigen-mode nodal diameter and blade reinforcing on aero-excitation increment is analyzed. It has been established, in particular, that maximum value of the aero-excitation increment for the reinforced-blade row is two times less as compared with the original-blade row. Generally, results of the study point definitely to less probability of occurrence of blade self-oscillations in case of the reinforced blade-row.

  14. Performance of a Supercritical CO2 Bottoming Cycle for Aero Applications

    Directory of Open Access Journals (Sweden)

    Florian Jacob

    2017-03-01

    Full Text Available By 2050, the evolutionary approach to aero engine research may no longer provide meaningful returns on investment, whereas more radical approaches to improving thermal efficiency and reducing emissions might still prove cost effective. One such radical concept is the addition of a secondary power cycle that utilizes the otherwise largely wasted residual heat in the core engine’s exhaust gases. This could provide additional shaft power. Supercritical carbon dioxide closed-circuit power cycles are currently being investigated primarily for stationary power applications, but their high power density and efficiency, even for modest peak cycle temperatures, makes them credible bottoming cycle options for aero engine applications. Through individual geometric design and performance studies for each of the bottoming cycle’s major components, it was determined that a simple combined cycle aero engine could offer a 1.9% mission fuel burn benefit over a state-of-the-art geared turbofan for the year 2050. However, the even greater potential of more complex systems demands further investigation. For example, adding inter-turbine reheat (ITR to the combined cycle is predicted to significantly improve the fuel burn benefit.

  15. Mapped Chebyshev Pseudo-Spectral Method for Dynamic Aero-Elastic Problem of Limit Cycle Oscillation

    Science.gov (United States)

    Im, Dong Kyun; Kim, Hyun Soon; Choi, Seongim

    2018-05-01

    A mapped Chebyshev pseudo-spectral method is developed as one of the Fourier-spectral approaches and solves nonlinear PDE systems for unsteady flows and dynamic aero-elastic problem in a given time interval, where the flows or elastic motions can be periodic, nonperiodic, or periodic with an unknown frequency. The method uses the Chebyshev polynomials of the first kind for the basis function and redistributes the standard Chebyshev-Gauss-Lobatto collocation points more evenly by a conformal mapping function for improved numerical stability. Contributions of the method are several. It can be an order of magnitude more efficient than the conventional finite difference-based, time-accurate computation, depending on the complexity of solutions and the number of collocation points. The method reformulates the dynamic aero-elastic problem in spectral form for coupled analysis of aerodynamics and structures, which can be effective for design optimization of unsteady and dynamic problems. A limit cycle oscillation (LCO) is chosen for the validation and a new method to determine the LCO frequency is introduced based on the minimization of a second derivative of the aero-elastic formulation. Two examples of the limit cycle oscillation are tested: nonlinear, one degree-of-freedom mass-spring-damper system and two degrees-of-freedom oscillating airfoil under pitch and plunge motions. Results show good agreements with those of the conventional time-accurate simulations and wind tunnel experiments.

  16. Thirteenth annual conference of the Computation Fluid Dynamics Society of Canada (CFD 2005). Proceedings

    International Nuclear Information System (INIS)

    2005-01-01

    The Thirteenth Annual Conference of the Computational Fluid Dynamics Society of Canada, CFD 2005, was held in St. John's, Newfoundland from July 31 to August 3, 2005. The conference covers a variety of disciplines, including hydrodynamics, aerodynamics/aero-acoustics/aero-elasticity, combustion and heat transfer, hydrology, automotive, nuclear and other industrial application areas. Flows considered include non-Newtonian and multiphase flows, subsonic, supersonic and hypersonic flows, cavitating flows, free-surface flows, jet flows, vortex flows, detonation flows, plasma arc flows and porous media flows. A major theme of these flows is turbulence, and there are many papers that consider Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES), although Reynolds Averaged Navier-Stokes methods remain popular. There is a strong interest in high performance computing (HPC) because of the increased throughput it affords. Flow visualization and post processing is also highlighted in many papers

  17. [Structure of pain management facilities in Germany : Classification of medical and psychological pain treatment services-Consensus of the Joint Commission of the Professional Societies and Organizations for Quality in Pain Medicine].

    Science.gov (United States)

    Müller-Schwefe, G H H; Nadstawek, J; Tölle, T; Nilges, P; Überall, M A; Laubenthal, H J; Bock, F; Arnold, B; Casser, H R; Cegla, T H; Emrich, O M D; Graf-Baumann, T; Henning, J; Horlemann, J; Kayser, H; Kletzko, H; Koppert, W; Längler, K H; Locher, H; Ludwig, J; Maurer, S; Pfingsten, M; Schäfer, M; Schenk, M; Willweber-Strumpf, A

    2016-06-01

    On behalf of the Medical/Psychological Pain Associations, Pain Patients Alliance and the Professional Association of Pain Physicians and Psychologists, the Joint Commission of Professional Societies and Organizations for Quality in Pain Medicine, working in close collaboration with the respective presidents, has developed verifiable structural and process-related criteria for the classification of medical and psychological pain treatment facilities in Germany. Based on the established system of graded care in Germany and on existing qualifications, these criteria also argue for the introduction of a basic qualification in pain medicine. In addition to the first-ever comprehensive description of psychological pain facilities, the criteria presented can be used to classify five different levels of pain facilities, from basic pain management facilities, to specialized institutions, to the Centre for Interdisciplinary Pain Medicine. The recommendations offer binding and verifiable criteria for quality assurance in pain medicine and improved pain treatment.

  18. Treatment of onychomycosis caused by dermatophytes--an opinion proposed by Committee for Standardization of the Japanese Society for Medical Mycology 2007.

    Science.gov (United States)

    Mohri, Shinobu; Watanabe, Shinichi; Toshio, Kusunoki; Shibuya, Kazutoshi; Nishiyama, Yayoi; Abe, Michiko; Uno, Jun; Oguri, Toyoko; Maeasaki, Shigefumi; Ikeda, Reiko; Abe, Shigeru

    2008-01-01

    After the rapid progress in therapeutic pharmaceutics against onychomycosis caused by dermatophytes in the 1990s, an optimal therapeutic strategy for individual patients with the onychomycosis has become possible for clinical dermatologists. In this review, we discuss on clinical problems concerning this disease and propose recommendable treatments for each patient with topical and/or systemic use of antifungal agents. Finally, with consideration of already published therapeutic guidelines, we stress the necessity of "order-made" therapy for each patient with his/her medical status and wishes taking into account.

  19. Crystal spectroscopy of silicon aero-gel end-caps driven by a dynamic hohlraum on Z

    International Nuclear Information System (INIS)

    Nash, T.J.; Sanford, T.W.L.; Mock, R.C.; Leeper, R.J.; Chandler, G.A.; Bailey, J.E.; McKenney, J.L.; Mehlhorn, T.A.; Seaman, J.F.; McGurn, J.; Schroen, D.; Russell, C.; Lake, P.E.; Jobe, D.O.; Gilliland, T.; Nielsen, D.S.; Lucas, J.; Moore, T.; Torres, J.A.; MacFarlane, J.J.; Apruzese, J.P.; Chrien, R.; Idzorek, G.; Peterson, D.L.; Watt, R.

    2005-01-01

    We present results from crystal spectroscopic analysis of silicon aero-gel foams heated by dynamic hohlraums on Z. The dynamic hohlraum on Z creates a radiation source with a 230-eV average temperature over a 2.4-mm diameter. In these experiments silicon aero-gel foams with 10-mg/cm3 densities and 1.7-mm lengths were placed on both ends of the dynamic hohlraum. Several crystal spectrometers were placed both above and below the z-pinch to diagnose the temperature of the silicon aero-gel foam using the K-shell lines of silicon. The crystal spectrometers were (1) temporally integrated and spatially resolved, (2) temporally resolved and spatially integrated, and (3) both temporally and spatially resolved. The results indicate that the dynamic hohlraum heats the silicon aero-gel to approximately 150-eV at peak power. As the dynamic hohlraum source cools after peak power the silicon aero-gel continues to heat and jets axially at an average velocity of approximately 50-cm/μs. The spectroscopy has also shown that the reason for the up/down asymmetry in radiated power on Z is that tungsten enters the line-of-sight on the bottom of the machine much more than on the top

  20. 75 FR 10694 - Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Models N22B, N22S, and N24A...

    Science.gov (United States)

    2010-03-09

    ... Airworthiness Directives; AeroSpace Technologies of Australia Pty Ltd Models N22B, N22S, and N24A Airplanes... authority for Australia, has issued AD GAF-N22-52, Amendment 1, dated January 2010 (referred to after this... examining the MCAI in the AD docket. Relevant Service Information AeroSpace Technologies of Australia...

  1. Machining the Integral Impeller and Blisk of Aero-Engines: A Review of Surface Finishing and Strengthening Technologies

    Science.gov (United States)

    Fu, Youzhi; Gao, Hang; Wang, Xuanping; Guo, Dongming

    2017-05-01

    The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces for power transmission, and their surface integrity has significant effects on the aerodynamic efficiency and service life of an aero-engine. Thus, it is indispensable to finish and strengthen the blades before use. This paper presents a comprehensive literature review of studies on finishing and strengthening technologies for the impeller and blisk of aero-engines. The review includes independent and integrated finishing and strengthening technologies and discusses advanced rotational abrasive flow machining with back-pressure used for finishing the integral impeller and blisk. A brief assessment of future research problems and directions is also presented.

  2. Development and Validation of a New Blade Element Momentum Skewed-Wake Model within AeroDyn: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ning, S. A.; Hayman, G.; Damiani, R.; Jonkman, J.

    2014-12-01

    Blade element momentum methods, though conceptually simple, are highly useful for analyzing wind turbines aerodynamics and are widely used in many design and analysis applications. A new version of AeroDyn is being developed to take advantage of new robust solution methodologies, conform to a new modularization framework for National Renewable Energy Laboratory's FAST, utilize advanced skewed-wake analysis methods, fix limitations with previous implementations, and to enable modeling of highly flexible and nonstraight blades. This paper reviews blade element momentum theory and several of the options available for analyzing skewed inflow. AeroDyn implementation details are described for the benefit of users and developers. These new options are compared to solutions from the previous version of AeroDyn and to experimental data. Finally, recommendations are given on how one might select from the various available solution approaches.

  3. The spectral analysis of an aero-engine assembly incorporating a squeeze-film damper

    Science.gov (United States)

    Holmes, R.; Dede, M. M.

    1989-01-01

    Aero-engine structures have very low inherent damping and so artificial damping is often introduced by pumping oil into annular gaps between the casings and the outer races of some or all of the rolling-element bearings supporting the rotors. The thin oil films so formed are called squeeze film dampers and they can be beneficial in reducing rotor vibration due to unbalance and keeping to reasonable limits the forces transmitted to the engine casing. However, squeeze-film dampers are notoriously non-linear and as a result can introduce into the assembly such phenomena as subharmonic oscillations, jumps and combination frequencies. The purpose of the research is to investigate such phenomena both theoretically and experimentally on a test facility reproducing the essential features of a medium-size aero engine. The forerunner of this work was published. It was concerned with the examination of a squeeze-film damper in series with housing flexibility when supporting a rotor. The structure represented to a limited extent the essentials of the projected Rolls Royce RB401 engine. That research demonstrated the ability to calculate the oil-film forces arising from the squeeze film from known motions of the bearing components and showed that the dynamics of a shaft fitted with a squeeze film bearing can be predicted reasonably accurately. An aero-engine will normally have at least two shafts and so in addition to the excitation forces which are synchronous with the rotation of one shaft, there will also be forces at other frequencies from other shafts operating on the squeeze-film damper. Theoretical and experimental work to consider severe loading of squeeze-film dampers and to include these additional effects are examined.

  4. Recent trends in superalloys research for critical aero-engine components

    Energy Technology Data Exchange (ETDEWEB)

    Remy, Luc [Mine ParisTech, CNRS UMR 7633, 91 - Evry (France). Centre des Materiaux; Guedou, Jean-Yves [Snecma Safran Group, Moissy-Cramayel (France). Materials and Processes Dept.

    2010-07-01

    This paper is a brief survey of common research activity on superalloys for aero-engines between Snecma and Mines ParisTech Centre des Materiaux during recent years. First in disks applications, the development of new powder metallurgy superalloys is shown. Then grain boundary engineering is investigated in a wrought superalloy. Secondly, design oriented research on single crystals blades is shown: a damage model for low cycle fatigue is used for life prediction when cracks initiated at casting pores. The methodology developed for assessing coating life is illustrated for thermal barrier coating deposited on AMI single crystal superalloy. (orig.)

  5. Statistical learning methods for aero-optic wavefront prediction and adaptive-optic latency compensation

    Science.gov (United States)

    Burns, W. Robert

    Since the early 1970's research in airborne laser systems has been the subject of continued interest. Airborne laser applications depend on being able to propagate a near diffraction-limited laser beam from an airborne platform. Turbulent air flowing over the aircraft produces density fluctuations through which the beam must propagate. Because the index of refraction of the air is directly related to the density, the turbulent flow imposes aberrations on the beam passing through it. This problem is referred to as Aero-Optics. Aero-Optics is recognized as a major technical issue that needs to be solved before airborne optical systems can become routinely fielded. This dissertation research specifically addresses an approach to mitigating the deleterious effects imposed on an airborne optical system by aero-optics. A promising technology is adaptive optics: a feedback control method that measures optical aberrations and imprints the conjugate aberrations onto an outgoing beam. The challenge is that it is a computationally-difficult problem, since aero-optic disturbances are on the order of kilohertz for practical applications. High control loop frequencies and high disturbance frequencies mean that adaptive-optic systems are sensitive to latency in sensors, mirrors, amplifiers, and computation. These latencies build up to result in a dramatic reduction in the system's effective bandwidth. This work presents two variations of an algorithm that uses model reduction and data-driven predictors to estimate the evolution of measured wavefronts over a short temporal horizon and thus compensate for feedback latency. The efficacy of the two methods are compared in this research, and evaluated against similar algorithms that have been previously developed. The best version achieved over 75% disturbance rejection in simulation in the most optically active flow region in the wake of a turret, considerably outperforming conventional approaches. The algorithm is shown to be

  6. AeroPropulsoServoElasticity: Dynamic Modeling of the Variable Cycle Propulsion System

    Science.gov (United States)

    Kopasakis, George

    2012-01-01

    This presentation was made at the 2012 Fundamental Aeronautics Program Technical Conference and it covers research work for the Dynamic Modeling of the Variable cycle Propulsion System that was done under the Supersonics Project, in the area of AeroPropulsoServoElasticity. The presentation covers the objective for the propulsion system dynamic modeling work, followed by the work that has been done so far to model the variable Cycle Engine, modeling of the inlet, the nozzle, the modeling that has been done to model the affects of flow distortion, and finally presenting some concluding remarks and future plans.

  7. Applications of aero-acoustic analysis to wind turbine noise control

    International Nuclear Information System (INIS)

    Lowson, M.V.

    1992-01-01

    Wind turbine noise generation mechanisms are essentially equivalent to the aero-acoustic mechanisms of other rotors, which have been studied in depth for many years. Basic sources for the wind turbine noise radiation process are defined, and their significance assessed. From the analysis, areas of potential improvement in wind turbine noise prediction are defined. Suggestions are made for approaches to wind turbine noise control which separate the noise problems at cut-in from those at rated power. Some of these offer the possibility of noise reduction without unfavourable effects on performance. (author)

  8. Applications of aero-acoustic analysis to wind turbine noise control

    International Nuclear Information System (INIS)

    Lowson, M.

    1993-01-01

    Wind turbine noise generation mechanisms are essentially equivalent to the aero-acoustic mechanisms of other rotors, which have been studied in depth for many years. Basic sources for the wind turbine noise radiation process are defined, and their significance assessed. From the analysis, areas of potential improvement in wind turbine noise prediction are defined. Suggestions are made for approaches to wind turbine noise control which separate the noise problems at cut-in from those at rated power. Some of these offer the possibility of noise reduction without unfavourable effects on performance. (author)

  9. Aero-servo-viscoelasticity theory: Lifting surfaces, plates, velocity transients, flutter, and instability

    Science.gov (United States)

    Merrett, Craig G.

    Modern flight vehicles are fabricated from composite materials resulting in flexible structures that behave differently from the more traditional elastic metal structures. Composite materials offer a number of advantages compared to metals, such as improved strength to mass ratio, and intentional material property anisotropy. Flexible aircraft structures date from the Wright brothers' first aircraft with fabric covered wooden frames. The flexibility of the structure was used to warp the lifting surface for flight control, a concept that has reappeared as aircraft morphing. These early structures occasionally exhibited undesirable characteristics during flight such as interactions between the empennage and the aft fuselage, or control problems with the elevators. The research to discover the cause and correction of these undesirable characteristics formed the first foray into the field of aeroelasticity. Aeroelasticity is the intersection and interaction between aerodynamics, elasticity, and inertia or dynamics. Aeroelasticity is well suited for metal aircraft, but requires expansion to improve its applicability to composite vehicles. The first is a change from elasticity to viscoelasticity to more accurately capture the solid mechanics of the composite material. The second change is to include control systems. While the inclusion of control systems in aeroelasticity lead to aero-servo-elasticity, more control possibilities exist for a viscoelastic composite material. As an example, during the lay-up of carbon-epoxy plies, piezoelectric control patches are inserted between different plies to give a variety of control options. The expanded field is called aero-servo-viscoelasticity. The phenomena of interest in aero-servo-viscoelasticity are best classified according to the type of structure considered, either a lifting surface or a panel, and the type of dynamic stability present. For both types of structures, the governing equations are integral

  10. Laboratory testing of extravascular body fluids in Croatia: a survey of the Working group for extravascular body fluids of the Croatian Society of Medical Biochemistry and Laboratory Medicine.

    Science.gov (United States)

    Kopcinovic, Lara Milevoj; Vogrinc, Zeljka; Kocijan, Irena; Culej, Jelena; Aralica, Merica; Jokic, Anja; Antoncic, Dragana; Bozovic, Marija

    2016-10-15

    We hypothesized that extravascular body fluid (EBF) analysis in Croatia is not harmonized and aimed to investigate preanalytical, analytical and postanalytical procedures used in EBF analysis in order to identify key aspects that should be addressed in future harmonization attempts. An anonymous online survey created to explore laboratory testing of EBF was sent to secondary, tertiary and private health care Medical Biochemistry Laboratories (MBLs) in Croatia. Statements were designed to address preanalytical, analytical and postanalytical procedures of cerebrospinal, pleural, peritoneal (ascites), pericardial, seminal, synovial, amniotic fluid and sweat. Participants were asked to declare the strength of agreement with proposed statements using a Likert scale. Mean scores for corresponding separate statements divided according to health care setting were calculated and compared. The survey response rate was 0.64 (58 / 90). None of the participating private MBLs declared to analyse EBF. We report a mean score of 3.45 obtained for all statements evaluated. Deviations from desirable procedures were demonstrated in all EBF testing phases. Minor differences in procedures used for EBF analysis comparing secondary and tertiary health care MBLs were found. The lowest scores were obtained for statements regarding quality control procedures in EBF analysis, participation in proficiency testing programmes and provision of interpretative comments on EBF's test reports. Although good laboratory EBF practice is present in Croatia, procedures for EBF analysis should be further harmonized to improve the quality of EBF testing and patient safety.

  11. The Chaotic Prediction for Aero-Engine Performance Parameters Based on Nonlinear PLS Regression

    Directory of Open Access Journals (Sweden)

    Chunxiao Zhang

    2012-01-01

    Full Text Available The prediction of the aero-engine performance parameters is very important for aero-engine condition monitoring and fault diagnosis. In this paper, the chaotic phase space of engine exhaust temperature (EGT time series which come from actual air-borne ACARS data is reconstructed through selecting some suitable nearby points. The partial least square (PLS based on the cubic spline function or the kernel function transformation is adopted to obtain chaotic predictive function of EGT series. The experiment results indicate that the proposed PLS chaotic prediction algorithm based on biweight kernel function transformation has significant advantage in overcoming multicollinearity of the independent variables and solve the stability of regression model. Our predictive NMSE is 16.5 percent less than that of the traditional linear least squares (OLS method and 10.38 percent less than that of the linear PLS approach. At the same time, the forecast error is less than that of nonlinear PLS algorithm through bootstrap test screening.

  12. Research and Development of Some Advanced High Temperature Titanium Alloys for Aero-engine

    Directory of Open Access Journals (Sweden)

    CAI Jian-ming

    2016-08-01

    Full Text Available Some advanced high temperature titanium alloys are usually selected to be manufactured into blade, disc, case, blisk and bling under high temperature environment in compressor and turbine system of a new generation high thrust-mass ratio aero-engine. The latest research progress of 600℃ high temperature titanium alloy, fireproof titanium alloy, TiAl alloy, continuous SiC fiber reinforced titanium matrix composite and their application technology in recent years in China were reviewed in this paper. The key technologies need to be broken through in design, processing and application of new material and component are put forward, including industrial ingot composition of high purified and homogeneous control technology, preparation technology of the large size bar and special forgings, machining technology of blisk and bling parts, material property evaluation and application design technique. The future with the continuous application of advanced high temperature titanium alloys, will be a strong impetus to the development of China's aero-engine technology.

  13. The Design and Semi-Physical Simulation Test of Fault-Tolerant Controller for Aero Engine

    Science.gov (United States)

    Liu, Yuan; Zhang, Xin; Zhang, Tianhong

    2017-11-01

    A new fault-tolerant control method for aero engine is proposed, which can accurately diagnose the sensor fault by Kalman filter banks and reconstruct the signal by real-time on-board adaptive model combing with a simplified real-time model and an improved Kalman filter. In order to verify the feasibility of the method proposed, a semi-physical simulation experiment has been carried out. Besides the real I/O interfaces, controller hardware and the virtual plant model, semi-physical simulation system also contains real fuel system. Compared with the hardware-in-the-loop (HIL) simulation, semi-physical simulation system has a higher degree of confidence. In order to meet the needs of semi-physical simulation, a rapid prototyping controller with fault-tolerant control ability based on NI CompactRIO platform is designed and verified on the semi-physical simulation test platform. The result shows that the controller can realize the aero engine control safely and reliably with little influence on controller performance in the event of fault on sensor.

  14. Takagi-Sugeno fuzzy model identification for turbofan aero-engines with guaranteed stability

    Directory of Open Access Journals (Sweden)

    Ruichao LI

    2018-06-01

    Full Text Available This paper is concerned with identifying a Takagi-Sugeno (TS fuzzy model for turbofan aero-engines working under the maximum power status (non-afterburning. To establish the fuzzy system, theoretical contributions are made as follows. First, by fixing antecedent parameters, the estimation of consequent parameters in state-space representations is formulated as minimizing a quadratic cost function. Second, to avoid obtaining unstable identified models, a new theorem is proposed to transform the prior-knowledge of stability into constraints. Then based on the aforementioned work, the identification problem is synthesized as a constrained quadratic optimization. By solving the constrained optimization, a TS fuzzy system is identified with guaranteed stability. Finally, the proposed method is applied to the turbofan aero-engine using simulation data generated from an aerothermodynamics component-level model. Results show the identified fuzzy model achieves a high fitting accuracy while stabilities of the overall fuzzy system and all its local models are also guaranteed. Keywords: Constrained optimization, Fuzzy system, Stability, System identification, Turbofan engine

  15. Aero-Propulsion Technology (APT) Task V Low Noise ADP Engine Definition Study

    Science.gov (United States)

    Holcombe, V.

    2003-01-01

    A study was conducted to identify and evaluate noise reduction technologies for advanced ducted prop propulsion systems that would allow increased capacity operation and result in an economically competitive commercial transport. The study investigated the aero/acoustic/structural advancements in fan and nacelle technology required to match or exceed the fuel burned and economic benefits of a constrained diameter large Advanced Ducted Propeller (ADP) compared to an unconstrained ADP propulsion system with a noise goal of 5 to 10 EPNDB reduction relative to FAR 36 Stage 3 at each of the three measuring stations namely, takeoff (cutback), approach and sideline. A second generation ADP was selected to operate within the maximum nacelle diameter constrain of 160 deg to allow installation under the wing. The impact of fan and nacelle technologies of the second generation ADP on fuel burn and direct operating costs for a typical 3000 nm mission was evaluated through use of a large, twin engine commercial airplane simulation model. The major emphasis of this study focused on fan blade aero/acoustic and structural technology evaluations and advanced nacelle designs. Results of this study have identified the testing required to verify the interactive performance of these components, along with noise characteristics, by wind tunnel testing utilizing and advanced interaction rig.

  16. Aftereffect of radiotherapy of upper aero-digestive tracts in odontological care

    International Nuclear Information System (INIS)

    Schiochet, Luc

    2010-01-01

    In its first part, this thesis proposes a detailed presentation of the upper aero-digestive tract cancer. The author defines the cancerous process, describes anatomic aspects, and discusses epidemiological aspects (occurrence, mortality, survival, and epidemiological data in different countries). In the second part, the author discusses the role of radiotherapy and of dental surgery in taking a cancerous patient into care (general principles of radiotherapy, therapeutic options and choices, association of radiotherapy, chemotherapy and surgery). Principles of radiotherapy are then more precisely addressed: physical principles (X rays, gamma rays, electrons, neutrons, and protons), radioactivity doses, radiotherapy effect, main equipment, radiotherapy techniques (conformational or intensity-modulated radiotherapy, computed tomography, Cyberknife, external radiotherapy, brachytherapy). The third part addresses early oral-facial complications induced by radiotherapy: factors favouring these complications, nervous effects, effects on the blood system and on the skin, hyposialia and xerostomia, radio-induced mucositis of upper aero-digestive tracts. The next part addresses late effects: late cutaneous after-effects, late radio-mucositis, limitation of mouth opening, tooth decays, osteoradionecrosis. The last part addresses the role of the dental surgeon in taking into care a patient whose head and neck have been irradiated: role before irradiation, during irradiation, and after irradiation [fr

  17. Fuselage boundary-layer refraction of fan tones radiated from an installed turbofan aero-engine.

    Science.gov (United States)

    Gaffney, James; McAlpine, Alan; Kingan, Michael J

    2017-03-01

    A distributed source model to predict fan tone noise levels of an installed turbofan aero-engine is extended to include the refraction effects caused by the fuselage boundary layer. The model is a simple representation of an installed turbofan, where fan tones are represented in terms of spinning modes radiated from a semi-infinite circular duct, and the aircraft's fuselage is represented by an infinitely long, rigid cylinder. The distributed source is a disk, formed by integrating infinitesimal volume sources located on the intake duct termination. The cylinder is located adjacent to the disk. There is uniform axial flow, aligned with the axis of the cylinder, everywhere except close to the cylinder where there is a constant thickness boundary layer. The aim is to predict the near-field acoustic pressure, and in particular, to predict the pressure on the cylindrical fuselage which is relevant to assess cabin noise. Thus no far-field approximations are included in the modelling. The effect of the boundary layer is quantified by calculating the area-averaged mean square pressure over the cylinder's surface with and without the boundary layer included in the prediction model. The sound propagation through the boundary layer is calculated by solving the Pridmore-Brown equation. Results from the theoretical method show that the boundary layer has a significant effect on the predicted sound pressure levels on the cylindrical fuselage, owing to sound radiation of fan tones from an installed turbofan aero-engine.

  18. A Co-modeling Method Based on Component Features for Mechatronic Devices in Aero-engines

    Science.gov (United States)

    Wang, Bin; Zhao, Haocen; Ye, Zhifeng

    2017-08-01

    Data-fused and user-friendly design of aero-engine accessories is required because of their structural complexity and stringent reliability. This paper gives an overview of a typical aero-engine control system and the development process of key mechatronic devices used. Several essential aspects of modeling and simulation in the process are investigated. Considering the limitations of a single theoretic model, feature-based co-modeling methodology is suggested to satisfy the design requirements and compensate for diversity of component sub-models for these devices. As an example, a stepper motor controlled Fuel Metering Unit (FMU) is modeled in view of the component physical features using two different software tools. An interface is suggested to integrate the single discipline models into the synthesized one. Performance simulation of this device using the co-model and parameter optimization for its key components are discussed. Comparison between delivery testing and the simulation shows that the co-model for the FMU has a high accuracy and the absolute superiority over a single model. Together with its compatible interface with the engine mathematical model, the feature-based co-modeling methodology is proven to be an effective technical measure in the development process of the device.

  19. Anti-infective Vaccination Strategies in Patients with Hematologic Malignancies or Solid Tumors - Guideline of the Infectious Diseases Working Party (AGIHO) of the German Society for Hematology and Medical Oncology (DGHO).

    Science.gov (United States)

    Rieger, C T; Liss, B; Mellinghoff, S; Buchheidt, D; Cornely, O A; Egerer, G; Heinz, W J; Hentrich, M; Maschmeyer, G; Mayer, K; Sandherr, M; Silling, G; Ullmann, A; Vehreschild, M J G T; von Lilienfeld-Toal, M; Wolf, H H; Lehners, N

    2018-04-24

    Infectious complications are a significant cause of morbidity and mortality in patients with malignancies specifically when receiving anticancer treatments. Prevention of infection through vaccines is an important aspect of clinical care of cancer patients. Immunocompromising effects of the underlying disease as well as of antineoplastic therapies need to be considered when devising vaccination strategies. This guideline provides clinical recommendations on vaccine use in cancer patients including autologous stem cell transplant recipients, while allogeneic stem cell transplantation is subject of a separate guideline. The document was prepared by the Infectious Diseases Working Party (AGIHO) of the German Society for Hematology and Medical Oncology (DGHO) by reviewing currently available data and applying evidence-based medicine criteria.

  20. Central venous catheter-related infections in hematology and oncology: 2012 updated guidelines on diagnosis, management and prevention by the Infectious Diseases Working Party of the German Society of Hematology and Medical Oncology.

    Science.gov (United States)

    Hentrich, M; Schalk, E; Schmidt-Hieber, M; Chaberny, I; Mousset, S; Buchheidt, D; Ruhnke, M; Penack, O; Salwender, H; Wolf, H-H; Christopeit, M; Neumann, S; Maschmeyer, G; Karthaus, M

    2014-05-01

    Cancer patients are at increased risk for central venous catheter-related infections (CRIs). Thus, a comprehensive, practical and evidence-based guideline on CRI in patients with malignancies is warranted. A panel of experts by the Infectious Diseases Working Party (AGIHO) of the German Society of Hematology and Medical Oncology (DGHO) has developed a guideline on CRI in cancer patients. Literature searches of the PubMed, Medline and Cochrane databases were carried out and consensus discussions were held. Recommendations on diagnosis, management and prevention of CRI in cancer patients are made, and the strength of the recommendation and the level of evidence are presented. This guideline is an evidence-based approach to the diagnosis, management and prevention of CRI in cancer patients.

  1. A Universal Standard for the Validation of Blood Pressure Measuring Devices: Association for the Advancement of Medical Instrumentation/European Society of Hypertension/International Organization for Standardization (AAMI/ESH/ISO) Collaboration Statement.

    Science.gov (United States)

    Stergiou, George S; Alpert, Bruce; Mieke, Stephan; Asmar, Roland; Atkins, Neil; Eckert, Siegfried; Frick, Gerhard; Friedman, Bruce; Graßl, Thomas; Ichikawa, Tsutomu; Ioannidis, John P; Lacy, Peter; McManus, Richard; Murray, Alan; Myers, Martin; Palatini, Paolo; Parati, Gianfranco; Quinn, David; Sarkis, Josh; Shennan, Andrew; Usuda, Takashi; Wang, Jiguang; Wu, Colin O; O'Brien, Eoin

    2018-03-01

    In the past 30 years, several organizations, such as the US Association for the Advancement of Medical Instrumentation (AAMI), the British Hypertension Society, the European Society of Hypertension (ESH) Working Group on Blood Pressure (BP) Monitoring, and the International Organization for Standardization (ISO), have developed protocols for clinical validation of BP measuring devices. However, it is recognized that science, as well as patients, consumers, and manufacturers, would be best served if all BP measuring devices were assessed for accuracy according to an agreed single validation protocol that had global acceptance. Therefore, an international initiative was taken by the AAMI, ESH, and ISO experts who agreed to develop a universal standard for device validation. This statement presents the key aspects of a validation procedure, which were agreed by the AAMI, ESH, and ISO representatives as the basis for a single universal validation protocol. As soon as the AAMI/ESH/ISO standard is fully developed, this will be regarded as the single universal standard and will replace all other previous standards/protocols. © 2018 American Heart Association, Inc., and Wolters Kluwer Health, Inc.

  2. Study on aero-dynamic characteristics of the sloop rig (continued); Sloop ring no kuriki tokusei no ichikaiseki (zoku)

    Energy Technology Data Exchange (ETDEWEB)

    Shinkai, A.; Iyoda, H. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1997-09-04

    A numerical simulation method was formerly provided for analyzing aero-dynamic characteristics of sloop rig by the vortex distribution method. For this method, aero-dynamic characteristics of the sloop rib were formulated by treating air flow around sail as a two-dimensional problem and by assuming sail as a membrane. The sloop rig is a yacht for more than two persons, which is the most popular form of rig. A main sail and a jib sheet are fixed on a mast. In this study, the method developed based on the panel method was introduced for analyzing the effects of jib sheet which can control the jib trim angle. Generality of the present aero-dynamic characteristics was enhanced, and problems of the analysis method were extracted through the numerical simulation of a yacht with sloop rig. Influence of the position of fairleader on the aero-dynamic characteristics was qualitatively grasped by considering the effects of jib sheet and by trimming the elevation into ideal one. 6 refs., 11 figs.

  3. 75 FR 22512 - Airworthiness Directives; Piaggio Aero Industries S.p.A. Model PIAGGIO P-180 Airplanes

    Science.gov (United States)

    2010-04-29

    ... Airworthiness Directives; Piaggio Aero Industries S.p.A. Model PIAGGIO P-180 Airplanes AGENCY: Federal Aviation... presence of potential ignition sources such as electrical equipment and connectors. As a consequence, this..., agree with their substance. But we might have found it necessary to use different words from those in...

  4. A study on optimal control of the aero-propulsion system acceleration process under the supersonic state

    Directory of Open Access Journals (Sweden)

    Fengyong Sun

    2017-04-01

    Full Text Available In order to solve the aero-propulsion system acceleration optimal problem, the necessity of inlet control is discussed, and a fully new aero-propulsion system acceleration process control design including the inlet, engine, and nozzle is proposed in this paper. In the proposed propulsion system control scheme, the inlet, engine, and nozzle are simultaneously adjusted through the FSQP method. In order to implement the control scheme design, an aero-propulsion system component-level model is built to simulate the inlet working performance and the matching problems between the inlet and engine. Meanwhile, a stabilizing inlet control scheme is designed to solve the inlet control problems. In optimal control of the aero-propulsion system acceleration process, the inlet is an emphasized control unit in the optimal acceleration control system. Two inlet control patterns are discussed in the simulation. The simulation results prove that by taking the inlet ramp angle as an active control variable instead of being modulated passively, acceleration performance could be obviously enhanced. Acceleration objectives could be obtained with a faster acceleration time by 5%.

  5. 76 FR 7694 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model PIAGGIO P-180 Airplanes

    Science.gov (United States)

    2011-02-11

    ... Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model PIAGGIO P-180 Airplanes AGENCY: Federal Aviation... Piaggio service bulletin number specified in the Alternative Methods of Compliance (AMOCs) section is..., except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received...

  6. 76 FR 4056 - Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model PIAGGIO P-180 Airplanes

    Science.gov (United States)

    2011-01-24

    ..., is considered the State of Design for PIAGGIO AERO INDUSTRIES S.p.A Model PIAGGIO P- 180 airplanes. A... ensuring that the drain lines of the environmental unit condenser are not clogged. Since AD 2007-24-15... condition described previously is likely to exist or develop in other products of the same type design. AD...

  7. Guideline for the diagnosis of drug hypersensitivity reactions: S2K-Guideline of the German Society for Allergology and Clinical Immunology (DGAKI) and the German Dermatological Society (DDG) in collaboration with the Association of German Allergologists (AeDA), the German Society for Pediatric Allergology and Environmental Medicine (GPA), the German Contact Dermatitis Research Group (DKG), the Swiss Society for Allergy and Immunology (SGAI), the Austrian Society for Allergology and Immunology (ÖGAI), the German Academy of Allergology and Environmental Medicine (DAAU), the German Center for Documentation of Severe Skin Reactions and the German Federal Institute for Drugs and Medical Products (BfArM).

    Science.gov (United States)

    Brockow, Knut; Przybilla, Bernhard; Aberer, Werner; Bircher, Andreas J; Brehler, Randolf; Dickel, Heinrich; Fuchs, Thomas; Jakob, Thilo; Lange, Lars; Pfützner, Wolfgang; Mockenhaupt, Maja; Ott, Hagen; Pfaar, Oliver; Ring, Johannes; Sachs, Bernhardt; Sitter, Helmut; Trautmann, Axel; Treudler, Regina; Wedi, Bettina; Worm, Margitta; Wurpts, Gerda; Zuberbier, Torsten; Merk, Hans F

    Drug hypersensitivity reactions are unpredictable adverse drug reactions. They manifest either within 1-6 h following drug intake (immediate reactions) with mild to life-threatening symptoms of anaphylaxis, or several hours to days later (delayed reactions), primarily as exanthematous eruptions. It is not always possible to detect involvement of the immune system (allergy). Waiving diagnostic tests can result in severe reactions on renewed exposure on the one hand, and to unjustified treatment restrictions on the other. With this guideline, experts from various specialist societies and institutions have formulated recommendations and an algorithm for the diagnosis of allergies. The key principles of diagnosing allergic/hypersensitivity drug reactions are presented. Where possible, the objective is to perform allergy diagnostics within 4 weeks-6 months following the reaction. A clinical classification of symptoms based on the morphology and time course of the reaction is required in order to plan a diagnostic work-up. In the case of typical symptoms of a drug hypersensitivity reaction and unequivocal findings from validated skin and/or laboratory tests, a reaction can be attributed to a trigger with sufficient confidence. However, skin and laboratory tests are often negative or insufficiently reliable. In such cases, controlled provocation testing is required to clarify drug reactions. This method is reliable and safe when attention is paid to indications and contraindications and performed under appropriate medical supervision. The results of the overall assessment are discussed with the patient and documented in an "allergy passport" in order to ensure targeted avoidance in the future and allow the use of alternative drugs where possible.

  8. Aerosols at the poles: an AeroCom Phase II multi-model evaluation

    Directory of Open Access Journals (Sweden)

    M. Sand

    2017-10-01

    Full Text Available Atmospheric aerosols from anthropogenic and natural sources reach the polar regions through long-range transport and affect the local radiation balance. Such transport is, however, poorly constrained in present-day global climate models, and few multi-model evaluations of polar anthropogenic aerosol radiative forcing exist. Here we compare the aerosol optical depth (AOD at 550 nm from simulations with 16 global aerosol models from the AeroCom Phase II model intercomparison project with available observations at both poles. We show that the annual mean multi-model median is representative of the observations in Arctic, but that the intermodel spread is large. We also document the geographical distribution and seasonal cycle of the AOD for the individual aerosol species: black carbon (BC from fossil fuel and biomass burning, sulfate, organic aerosols (OAs, dust, and sea-salt. For a subset of models that represent nitrate and secondary organic aerosols (SOAs, we document the role of these aerosols at high latitudes.The seasonal dependence of natural and anthropogenic aerosols differs with natural aerosols peaking in winter (sea-salt and spring (dust, whereas AOD from anthropogenic aerosols peaks in late spring and summer. The models produce a median annual mean AOD of 0.07 in the Arctic (defined here as north of 60° N. The models also predict a noteworthy aerosol transport to the Antarctic (south of 70° S with a resulting AOD varying between 0.01 and 0.02. The models have estimated the shortwave anthropogenic radiative forcing contributions to the direct aerosol effect (DAE associated with BC and OA from fossil fuel and biofuel (FF, sulfate, SOAs, nitrate, and biomass burning from BC and OA emissions combined. The Arctic modelled annual mean DAE is slightly negative (−0.12 W m−2, dominated by a positive BC FF DAE in spring and a negative sulfate DAE in summer. The Antarctic DAE is governed by BC FF. We perform sensitivity

  9. American Medical Society for Sports Medicine

    Science.gov (United States)

    ... Recurring Monthly Gift Contact Us Contact Us Contact Us Education Education Education AMSSM International Traveling Fellowship Program Fellow ... AMSSM 27th Annual Meeting FOUNDATION Donate Grants ABOUT ... Meeting Conferences Testing Center Fellowships Abstract Submissions ...

  10. The quality and scope of information provided by medical laboratories to patients before laboratory testing: Survey of the Working Group for Patient Preparation of the Croatian Society of Medical Biochemistry and Laboratory Medicine.

    Science.gov (United States)

    Nikolac, Nora; Simundic, Ana-Maria; Kackov, Sanja; Serdar, Tihana; Dorotic, Adrijana; Fumic, Ksenija; Gudasic-Vrdoljak, Jelena; Klenkar, Kornelija; Sambunjak, Jadranka; Vidranski, Valentina

    2015-10-23

    The aim of this work was to evaluate to what extent the scope and content of information provided to patients is standardized across medical biochemistry laboratories in Croatia. Two on-line self-report surveys were sent out: Survey A regarding attitudes on importance of patient preparation and Survey B on the contents of patient preparation instructions. 13/118 laboratories (11%) do not provide written instructions to patients on how to prepare for laboratory testing, and 36 (40%) do not include information about water intake in their instructions. Only half of laboratories provide instructions for prostate-specific antigen (53.8%), female sex hormones (53.7%) and therapeutic drug monitoring (TDM) (52.5%). Inadequate information about fasting status (55.0%) and 24 hour urine collection (77.9%) were frequent errors with high severity and were associated with the greatest potential to cause patient harm. Laboratory professionals in Croatia have a positive attitude towards the importance of patient preparation for laboratory testing. However, the information for laboratory testing is not standardized and frequently lacks guidance for tests related to TDM, coagulation and endocrinology. This study highlights the need for standardized, updated and evidence-based recommendations for patient preparation in order to minimize the risk for patients. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Citizenship in civil society?

    NARCIS (Netherlands)

    Ossewaarde, Marinus R.R.

    2007-01-01

    This article seeks to provide a conceptual framework to complement and guide the empirical analysis of civil society. The core argument is that civil society must be understood, not as a category of (post)industrialized society, but as one of individualized society. Civil society is characterized by

  12. Risk and society

    International Nuclear Information System (INIS)

    Tubiana, M.; Vrousos, C.; Pages, J.P.; Carde, C.

    1999-01-01

    This book brings together the communications presented at the colloquium 'risk and society' held in Paris (France) on November 1998. During this colloquium, the various aspects of risk and of its management were discussed by medical specialists, historians, industrialists, engineers, philosophers, lawyers, politicians and administration representatives. The first theme concerns the controversies generated by the development of some activities (genetics, bio-technologies, nuclear and radiations use). The second theme concerns the management of risks and the way to conciliate the point of view of authorities and citizens (confidence of the public with respect to experts, scientists, industrialists, government and administrative representatives, role played by the media). The debates that took place during the colloquium have shown that the public opinion concerning the nuclear activities or the new technologies greatly depends on the ideological attitudes and on the public's likes and dislikes with respect to some categories of actors (distrust with respect to public decisions, fears with respect to changes and future, nostalgia of the past). The following aspects are reviewed: Notions of risk and hazard (risk and health, risk in today's society, medicine and society, the point of view of the industrialists and of the scientific and technical specialists); from the psychological aspects of the risk to its social aspects (survey of the risk assessment battlefield, social attenuation and amplification of risk, the feeling of risks in Europe, insecurity and delinquency, controversies around radioactivity and health); the negotiation and communication about risks (risk and public health, negotiation around risks, risks and information dissemination about the public debate, communication and crisis, evolution of risk communication, comparison between American and European approaches, the Seveso directive); the public debate and the evolution of risks management (the

  13. Switching LPV Control with Double-Layer LPV Model for Aero-Engines

    Science.gov (United States)

    Tang, Lili; Huang, Jinquan; Pan, Muxuan

    2017-11-01

    To cover the whole range of operating conditions of aero-engine, a double-layer LPV model is built so as to take into account of the variability due to the flight altitude, Mach number and the rotational speed. With this framework, the problem of designing LPV state-feedback robust controller that guarantees desired bounds on both H_∞ and H_2 performances is considered. Besides this, to reduce the conservativeness caused by a single LPV controller of the whole flight envelope and the common Lyapunov function method, a new method is proposed to design a family of LPV switching controllers. The switching LPV controllers can ensure that the closed-loop system remains stable in the sense of Lyapunov under arbitrary switching logic. Meanwhile, the switching LPV controllers can ensure the parameters change smoothly. The validity and performance of the theoretical results are demonstrated through a numerical example.

  14. Methodologies for predicting the part-load performance of aero-derivative gas turbines

    DEFF Research Database (Denmark)

    Haglind, Fredrik; Elmegaard, Brian

    2009-01-01

    Prediction of the part-load performance of gas turbines is advantageous in various applications. Sometimes reasonable part-load performance is sufficient, while in other cases complete agreement with the performance of an existing machine is desirable. This paper is aimed at providing some guidance...... on methodologies for predicting part-load performance of aero-derivative gas turbines. Two different design models – one simple and one more complex – are created. Subsequently, for each of these models, the part-load performance is predicted using component maps and turbine constants, respectively. Comparisons...... with manufacturer data are made. With respect to the design models, the simple model, featuring a compressor, combustor and turbines, results in equally good performance prediction in terms of thermal efficiency and exhaust temperature as does a more complex model. As for part-load predictions, the results suggest...

  15. Propulsion System Dynamic Modeling of the NASA Supersonic Concept Vehicle for AeroPropulsoServoElasticity

    Science.gov (United States)

    Kopasakis, George; Connolly, Joseph W.; Seiel, Jonathan

    2016-01-01

    A summary of the propulsion system modeling under NASA's High Speed Project (HSP) AeroPropulsoServoElasticity (APSE) task is provided with a focus on the propulsion system for the low-boom supersonic configuration developed by Lockheed Martin and referred to as the N+2 configuration. This summary includes details on the effort to date to develop computational models for the various propulsion system components. The objective of this paper is to summarize the model development effort in this task, while providing more detail in the modeling areas that have not been previously published. The purpose of the propulsion system modeling and the overall APSE effort is to develop an integrated dynamic vehicle model to conduct appropriate unsteady analysis of supersonic vehicle performance. This integrated APSE system model concept includes the propulsion system model, and the vehicle structural aerodynamics model. The development to date of such a preliminary integrated model will also be summarized in this report

  16. Reliability Estimation of Aero-engine Based on Mixed Weibull Distribution Model

    Science.gov (United States)

    Yuan, Zhongda; Deng, Junxiang; Wang, Dawei

    2018-02-01

    Aero-engine is a complex mechanical electronic system, based on analysis of reliability of mechanical electronic system, Weibull distribution model has an irreplaceable role. Till now, only two-parameter Weibull distribution model and three-parameter Weibull distribution are widely used. Due to diversity of engine failure modes, there is a big error with single Weibull distribution model. By contrast, a variety of engine failure modes can be taken into account with mixed Weibull distribution model, so it is a good statistical analysis model. Except the concept of dynamic weight coefficient, in order to make reliability estimation result more accurately, three-parameter correlation coefficient optimization method is applied to enhance Weibull distribution model, thus precision of mixed distribution reliability model is improved greatly. All of these are advantageous to popularize Weibull distribution model in engineering applications.

  17. OC3—Benchmark Exercise of Aero-elastic Offshore Wind Turbine Codes

    Science.gov (United States)

    Passon, P.; Kühn, M.; Butterfield, S.; Jonkman, J.; Camp, T.; Larsen, T. J.

    2007-07-01

    This paper introduces the work content and status of the first international investigation and verification of aero-elastic codes for offshore wind turbines as performed by the "Offshore Code Comparison Collaboration"(OC3) within the "IEA Wind Annex XXIII - Subtask 2". An overview is given on the state-of-the-art of the concerned offshore wind turbine simulation codes. Exemplary results of benchmark simulations from the first phase of the project are presented and discussed while subsequent phases are introduced. Furthermore, the paper discusses areas where differences between the codes have been identified and the sources of those differences, such as the differing theories implemented into the individual codes. Finally, further research and code development needs are presented based on the latest findings from the current state of the project.

  18. A Modular Aero-Propulsion System Simulation of a Large Commercial Aircraft Engine

    Science.gov (United States)

    DeCastro, Jonathan A.; Litt, Jonathan S.; Frederick, Dean K.

    2008-01-01

    A simulation of a commercial engine has been developed in a graphical environment to meet the increasing need across the controls and health management community for a common research and development platform. This paper describes the Commercial Modular Aero Propulsion System Simulation (C-MAPSS), which is representative of a 90,000-lb thrust class two spool, high bypass ratio commercial turbofan engine. A control law resembling the state-of-the-art on board modern aircraft engines is included, consisting of a fan-speed control loop supplemented by relevant engine limit protection regulator loops. The objective of this paper is to provide a top-down overview of the complete engine simulation package.

  19. Presentations from the Aeroelastic Workshop - latest results from AeroOpt

    Energy Technology Data Exchange (ETDEWEB)

    Hartvig Hansen, M. (ed.)

    2011-10-15

    This report contains the slides of the presentations at the Aeroelastic Workshop held at Risoe-DTU for the wind energy industry in Denmark on October 27, 2011. The scientific part of the agenda at this workshop was 1) Detailed and reduced models of dynamic mooring system (Anders M. Hansen). 2) Bend-twist coupling investigation in HAWC2 (Taeseong Kim). 3) Q3UIC - A new aerodynamic airfoil tool including rotational effects (Nestor R. Garcia). 4) Influence of up-scaling on loads, control and aerodynamic modeling (Helge Aa. Madsen). 5) Aerodynamic damping of lateral tower vibrations (Bjarne S. Kallesoee). 6) Open- and closed-loop aeroservoelastic analysis with HAWCStab2 (Morten H. Hansen). 7) Design and test of a thick, flatback, high-lift multielement airfoil (Frederik Zahle). The presented results are mainly obtained in the EUDP project ''Aeroelastic Optimization of MW Wind Turbines (AeroOpt)''. (Author)

  20. The Role of Free-Stream Turbulence on High Pressure Turbine Aero-Thermal Stage Interaction

    Science.gov (United States)

    Kopriva, James Earl

    Turbulence plays an important role on the aero-thermal performance of modern aircraft engine High Pressure Turbines (HPT). The role of the vane wake and passage turbulence on the downstream blade flow field is an important consideration for both performance and durability. Obtaining measurements to fully characterize the flow field can be challenging and costly in an experimental facility. Advances in computational Fluid Dynamic (CFD) modeling and High Performance Computing (HPC) are providing opportunity to close these measurement gaps. In order for CFD to be adopted, methods need to be both accurate and efficient. Meshing approaches must also be able to resolve complex HPT geometry while maintaining quality adequate for scale-resolved simulations. Therefore, the accuracy of executing scale-resolved simulations with a second-order code on a mesh of prisms and tetrahedrals in Fluent is considered. Before execution of the HPT computational study, a building block approach is taken to gain quantified predictive performance in the modeling approach as well as understanding limitations in lower computational cost modeling approaches. The predictive capability for Reynolds Averaged Navier Stokes (RANS), Hybrid Large Eddy Simulation (LES), and wall-resolved LES turbulence modeling approaches are first assessed for a cylinder in cross-flow at a Reynolds number of 2580. The flow condition and simple geometry facilitate a quick turn-around for modeling assessment before moving the HPT vane study at high Reynolds and Mach number conditions. Modeling approaches are then assessed relative to the experimental measurements of Arts and Rouvroit (1992) on a pitch-line HPT uncooled vane at high Mach and Reynolds numbers conditions with low (0-6%) free-stream turbulence. The current unstructured second-order LES approach agrees with experimental data and is found to be within the equivalent experimental uncertainty when compared to the structured high-ordered solver FDL3DI. The

  1. EFFECT OF AERO-/ANAEROBIOSIS ON DECARBOXYLASE ACTIVITY OF SELECTED LACTIC ACID BACTERIA

    Directory of Open Access Journals (Sweden)

    Stanislav Kráčmar

    2010-05-01

    Full Text Available Biogenic amines are undesirable compounds produced in foods mainly through bacterial decarboxylase activity. The aim of this study was to investigate some environmental conditions (particularly aero/anaerobiosis, sodium chloride concentration (0–2% w/w, and amount of lactose (0–1% w/w on the activity of tyrosine decarboxylase enzymes of selected six technological important Lactococcus lactis strains. The levels of parameters tested were chosen according to real situation in fermented dairy products technology (especially cheese-making. Tyramine was determined by the ion-exchange chromatography with post-column ninhydrine derivatization and spectrophotometric detection. Tyrosine decarboxylation occurred during the active growth phase. Under the model conditions used, oxygen availability had influence on tyramine production, anaerobiosis seemed to favour the enzyme activity because all L. lactis strains produced higher tyramine amount. doi:10.5219/43

  2. An AeroCom Assessment of Black Carbon in Arctic Snow and Sea Ice

    Science.gov (United States)

    Jiao, C.; Flanner, M. G.; Balkanski, Y.; Bauer, S. E.; Bellouin, N.; Bernsten, T. K.; Bian, H.; Carslaw, K. S.; Chin, M.; DeLuca, N.; hide

    2014-01-01

    Though many global aerosols models prognose surface deposition, only a few models have been used to directly simulate the radiative effect from black carbon (BC) deposition to snow and sea ice. Here, we apply aerosol deposition fields from 25 models contributing to two phases of the Aerosol Comparisons between Observations and Models (AeroCom) project to simulate and evaluate within-snow BC concentrations and radiative effect in the Arctic. We accomplish this by driving the offline land and sea ice components of the Community Earth System Model with different deposition fields and meteorological conditions from 2004 to 2009, during which an extensive field campaign of BC measurements in Arctic snow occurred. We find that models generally underestimate BC concentrations in snow in northern Russia and Norway, while overestimating BC amounts elsewhere in the Arctic. Although simulated BC distributions in snow are poorly correlated with measurements, mean values are reasonable. The multi-model mean (range) bias in BC concentrations, sampled over the same grid cells, snow depths, and months of measurements, are -4.4 (-13.2 to +10.7) ng/g for an earlier phase of AeroCom models (phase I), and +4.1 (-13.0 to +21.4) ng/g for a more recent phase of AeroCom models (phase II), compared to the observational mean of 19.2 ng/g. Factors determining model BC concentrations in Arctic snow include Arctic BC emissions, transport of extra-Arctic aerosols, precipitation, deposition efficiency of aerosols within the Arctic, and meltwater removal of particles in snow. Sensitivity studies show that the model-measurement evaluation is only weakly affected by meltwater scavenging efficiency because most measurements were conducted in non-melting snow. The Arctic (60-90degN) atmospheric residence time for BC in phase II models ranges from 3.7 to 23.2 days, implying large inter-model variation in local BC deposition efficiency. Combined with the fact that most Arctic BC deposition originates

  3. An AeroCom assessment of black carbon in Arctic snow and sea ice

    Energy Technology Data Exchange (ETDEWEB)

    Jiao, C.; Flanner, M. G.; Balkanski, Y.; Bauer, S. E.; Bellouin, N.; Berntsen, T. K.; Bian, H.; Carslaw, K. S.; Chin, M.; De Luca, N.; Diehl, T.; Ghan, S. J.; Iversen, T.; Kirkevåg, A.; Koch, D.; Liu, X.; Mann, G. W.; Penner, J. E.; Pitari, G.; Schulz, M.; Seland, Ø.; Skeie, R. B.; Steenrod, S. D.; Stier, P.; Takemura, T.; Tsigaridis, K.; van Noije, T.; Yun, Y.; Zhang, K.

    2014-01-01

    Though many global aerosols models prognose surface deposition, only a few models have been used to directly simulate the radiative effect from black carbon (BC) deposition to snow and sea ice. In this paper, we apply aerosol deposition fields from 25 models contributing to two phases of the Aerosol Comparisons between Observations and Models (AeroCom) project to simulate and evaluate within-snow BC concentrations and radiative effect in the Arctic. We accomplish this by driving the offline land and sea ice components of the Community Earth System Model with different deposition fields and meteorological conditions from 2004 to 2009, during which an extensive field campaign of BC measurements in Arctic snow occurred. We find that models generally underestimate BC concentrations in snow in northern Russia and Norway, while overestimating BC amounts elsewhere in the Arctic. Although simulated BC distributions in snow are poorly correlated with measurements, mean values are reasonable. The multi-model mean (range) bias in BC concentrations, sampled over the same grid cells, snow depths, and months of measurements, are -4.4 (-13.2 to +10.7) ng g-1 for an earlier phase of AeroCom models (phase I), and +4.1 (-13.0 to +21.4) ng g-1 for a more recent phase of AeroCom models (phase II), compared to the observational mean of 19.2 ng g-1. Factors determining model BC concentrations in Arctic snow include Arctic BC emissions, transport of extra-Arctic aerosols, precipitation, deposition efficiency of aerosols within the Arctic, and meltwater removal of particles in snow. Sensitivity studies show that the model–measurement evaluation is only weakly affected by meltwater scavenging efficiency because most measurements were conducted in non-melting snow. The Arctic (60–90° N) atmospheric residence time for BC in phase II models ranges from 3.7 to 23.2 days, implying large inter-model variation in local BC deposition efficiency. Combined with

  4. Investigation on flow oscillation modes and aero-acoustics generation mechanism in cavity

    Science.gov (United States)

    Yang, Dang-Guo; Lu, Bo; Cai, Jin-Sheng; Wu, Jun-Qiang; Qu, Kun; Liu, Jun

    2018-05-01

    Unsteady flow and multi-scale vortex transformation inside a cavity of L/D = 6 (ratio of length to depth) at Ma = 0.9 and 1.5 were studied using the numerical simulation method of modified delayed detached eddy simulation (DDES) in this paper. Aero-acoustic characteristics for the cavity at same flow conditions were obtained by the numerical method and 0.6 m by 0.6 m transonic and supersonic wind-tunnel experiments. The analysis on the computational and experimental results indicates that some vortex generates from flow separation in shear-layer over the cavity, and the vortex moves from forward to downward of the cavity at some velocity, and impingement of the vortex and the rear-wall of the cavity occurs. Some sound waves spread abroad to the cavity fore-wall, which induces some new vortex generation, and the vortex sheds, moves and impinges on the cavity rear-wall. New sound waves occur. The research results indicate that sound wave feedback created by the impingement of the shedding-vortices and rear cavity face leads to flow oscillations and noise generation inside the cavity. Analysis on aero-acoustic characteristics inside the cavity is feasible. The simulated self-sustained flow-oscillation modes and peak sound pressure on typical frequencies inside the cavity agree well with Rossiter’s and Heller’s predicated results. Moreover, the peak sound pressure occurs in the first and second flow-oscillation modes and most of sound energy focuses on the low-frequency region. Compared with subsonic speed (Ma = 0.9), aerodynamic noise is more intense at Ma = 1.5, which is induced by compression wave or shock wave in near region of fore and rear cavity face.

  5. Advanced Engineering Methods for Assessing Welding Distortion in Aero-Engine Assemblies

    International Nuclear Information System (INIS)

    Jackson, Kathryn; Darlington, Roger

    2011-01-01

    Welding remains an attractive fabrication method for aero-engine assemblies, offering high production rates and reduced total cost, particularly for large complex assemblies. However, distortion generated during the welding process continues to provide a major challenge in terms of the control of geometric tolerances and residual stress. The welding distortion is influenced by the sequence and position of joints, the clamping configuration and the design of the assembly. For large complex assemblies the range of these options may be large. Hence the use of numerical simulation at an early stage of the product development process is valuable to enable a wide range of these factors to be explored with the aim of minimising welding distortions before production commences, and thereby reducing the product development time. In this paper, a new technique for simulation of welding distortions based on a shrinkage analysis is evaluated for an aero-engine assembly. The shrinkage simulations were built and solved using the ESI Group software Weld Planner. The rapid simulation speed enabled a wide range of welding plans to be explored, leading to recommendations for the fabrication process. The sensitivity of the model to mesh size and material properties is reported. The results of the shrinkage analysis were found to be similar to those of a transient analysis generated using ESI Group software SysWeld. The solution times were found to be significantly lower for the shrinkage analysis than the transient analysis. Hence it has been demonstrated that shrinkage analysis is a valuable tool for exploring the fabrication process of a welded assembly at an early stage of the product development process.

  6. Aspergillus antibody detection: diagnostic strategy and technical considerations from the Société Française de Mycologie Médicale (French Society for Medical Mycology) expert committee.

    Science.gov (United States)

    Persat, F; Hennequin, C; Gangneux, J P

    2017-04-01

    Until now, there has been no consensus on the best method for the detection of anti-Aspergillus antibodies, a key diagnostic tool for chronic aspergilloses. To better appreciate the usage of and confidence in these techniques, the Société Française de Mycologie Médicale (French Society for Medical Mycology; SFMM) performed a two-step survey of French experts. First, we administered an initial survey to French labs performing Aspergillus serology to depict usage of the different techniques available for Aspergillus serology. Second, an opinion poll was conducted of 40 experts via an online questionnaire. Each item was rated from 1 to 9 according to the level of agreement. The initial survey revealed that enzyme-linked immunosorbent assay (ELISA) (81%) and immunoelectrophoresis (IEP) (67%) were the most commonly used techniques for screening and confirmation, respectively. The distinction between screening and confirmation techniques was confirmed by the experts (median = 7) with a 44.2% variation coefficient. Only ELISA for screening and IEP and Western blot (WB) for confirmation were clearly considered valuable methods (median ≥8 with variation coefficients less than 30%). The use of a confirmation technique was recommended in the case of a positive result in a compatible clinical context (cystic fibrosis, for example) or during the patient's follow-up. In the case of discordant results between the screening and confirmation techniques, the experts recommended greater confidence in the results obtained with the confirmation technique. All experts emphasized the need to standardize Aspergillus serology techniques and to better define the place of each of them in the diagnosis of aspergillosis. © The Author 2016. Published by Oxford University Press on behalf of The International Society for Human and Animal Mycology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  7. Diagnosis and Management of Gaucher Disease in India - Consensus Guidelines of the Gaucher Disease Task Force of the Society for Indian Academy of Medical Genetics and the Indian Academy of Pediatrics.

    Science.gov (United States)

    Puri, Ratna Dua; Kapoor, Seema; Kishnani, Priya S; Dalal, Ashwin; Gupta, Neerja; Muranjan, Mamta; Phadke, Shubha R; Sachdeva, Anupam; Verma, Ishwar C; Mistry, Pramod K

    2018-02-15

    Gaucher disease (GD) is amongst the most frequently occurring lysosomal storage disorder in all ethnicities. The clinical manifestations and natural history of GD is highly heterogeneous with extreme geographic and ethnic variations. The literature on GD has paucity of information and optimal management guidelines for Indian patients. Gaucher Disease Task Force was formed under the auspices of the Society for Indian Academy of Medical Genetics. Invited experts from various specialties formulated guidelines for the management of patients with GD. A writing committee was formed and the draft guidelines were circulated by email to all members for comments and inputs. The guidelines were finalized in December 2016 at the annual meeting of the Indian Academy of Medical Genetics. These guidelines are intended to serve as a standard framework for treating physicians and the health care systems for optimal management of Gaucher disease in India and to define unique needs of this patient population. Manifestations of GD are protean and a high index of suspicion is essential for timely diagnosis. Patients frequently experience diagnostic delays during which severe irreversible complications occur. Leucocyte acid b-glucosidase activity is mandatory for establishing the diagnosis of Gaucher disease; molecular testing can help identify patients at risk of neuronopathic disease. Enzyme replacement therapy for type 1 and type 3 Gaucher disease is the standard of care. Best outcomes are achieved by early initiation of therapy before onset of irreversible complications. However, in setting of progressive neurological symptoms such as seizures and or/ neuroregression, ERT is not recommended, as it cannot cross the blood brain barrier. The recommendations herein are for diagnosis, for initiation of therapy, therapeutic goals, monitoring and follow up of patients. We highlight that prevention of recurrence of the disease through genetic counseling and prenatal diagnosis is essential

  8. 2012 American Geriatrics Society Beers criteria: enhanced applicability for detecting potentially inappropriate medications in European older adults? A comparison with the Screening Tool of Older Person's Potentially Inappropriate Prescriptions.

    Science.gov (United States)

    Blanco-Reina, Encarnación; Ariza-Zafra, Gabriel; Ocaña-Riola, Ricardo; León-Ortiz, Matilde

    2014-07-01

    To determine the prevalence of potentially inappropriate medications (PIMs) and related factors through a comparative analysis of the Screening Tool of Older Person's Potentially Inappropriate Prescriptions (STOPP), the 2003 Beers criteria, and the 2012 AGS update of the Beers criteria. Cross-sectional. Primary care. Community-dwelling persons aged 65 and older who live on the island of Lanzarote, Spain (N = 407). Sociodemographic characteristics; independence in activities of daily living; cognitive function; Geriatric Depression Scale; clinical diagnoses; and complete data on indication, dosage, and length of drug treatments. One thousand eight hundred seventh-two prescriptions were examined, and the rate of PIMs was assessed with the three criteria. The primary endpoint was the percentage of participants receiving at least one PIM. Multivariate logistic regression was used to examine the factors related to PIMs. Potentially inappropriate medications were present in 24.3%, 35.4%, and 44% of participants, according to the 2003 Beers criteria, STOPP, and 2012 Beers criteria, respectively. The profile of PIMs was also different (the most frequent being benzodiazepines in both Beers criteria lists and aspirin in the STOPP). The number of drugs was associated with risk of prescribing PIMs in all three models, as was the presence of a psychological disorder in the 2003 Beers criteria (odds ratio (OR) = 2.07, 95% confidence interval (CI) = 1.26-3.40) and the 2012 Beers criteria (OR = 2.91, 95% CI = 1.83-4.66). The kappa for degree of agreement between STOPP and the 2012 Beers criteria was 0.35 (95% CI = 0.25-0.44). The 2012 Beers criteria detected the highest number of PIMs, and given the scant overlapping with the STOPP criteria, the use of both tools may be seen as complementary. © 2014, Copyright the Authors Journal compilation © 2014, The American Geriatrics Society.

  9. C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 2: Test Bed Performance Evaluation and Final AeroMACS Recommendations

    Science.gov (United States)

    Hall, Edward; Magner, James

    2011-01-01

    This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II (this document) describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

  10. C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 1: Concepts of Use, Initial System Requirements, Architecture, and AeroMACS Design Considerations

    Science.gov (United States)

    Hall, Edward; Isaacs, James; Henriksen, Steve; Zelkin, Natalie

    2011-01-01

    This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I (this document) is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

  11. The internationalization of the Korean radiological society

    International Nuclear Information System (INIS)

    Choi, Byung Ihn; Kim, Seung Hyup; Han, Man Chung; Kim, Young Goo; Kim, Kun Sang

    1995-01-01

    Toward the beginning of the twenty-first century, the world experiences the dramatic changes in politics, economics and culture, and it is evident that the Korean medical field will not be able to survive provided it doesn't prepare ourselves to adapt to those changes. The Korean Medical Society held a forum for the active operation of the medical society, inviting several leading affiliated societies, to meet the needs of the times. This review describes the summary of the presentation that the authors made on behalf of the Korean Radiological Society in the forum, including the organization, current status of academic activity, current status of international communication, and problems encountered in the internationalization of the Korean Radiological Society

  12. Simultaneous validation of the Grandway MD2301 digital automatic blood pressure monitor by the British Hypertension Society and the Association for the Advancement of Medical Instrumentation/the International Organization for Standardization protocols.

    Science.gov (United States)

    Huang, Jinhua; Wang, Yun; Liu, Zhaoying; Wang, Yuling

    2017-02-01

    The aim of this study was to determine the accuracy of the Grandway MD2301 digital automatic blood pressure monitor by the British Hypertension Society (BHS) and the Association for the Advancement of Medical Instrumentation (AAMI)/the International Organization for Standardization (ISO) protocols. A total of 85 participants were included for evaluation based on the requirements of the BHS and the AAMI/ISO protocols. The validation procedure and data analysis followed the protocols precisely. The device achieved A/A grading for the BHS protocol and maintained A/A grading throughout the low, medium and high blood pressure ranges. The device also fulfilled the requirement of the AAMI/ISO protocol with device-observer differences of -0.9±5.6 and 0.8±5.2 mmHg for systolic and diastolic blood pressure, respectively, for criterion 1, and -0.9±4.7 and 0.8±4.2 mmHg, respectively, for criterion 2. The Grandway MD2301 digital automatic blood pressure monitor achieved A/A grade of the BHS protocol and passed the requirements of the AAMI/ISO protocol in adults.

  13. Reconstruction of the aero-mixture channels of the pulverized coal plant of the 100MW power plant unit

    Directory of Open Access Journals (Sweden)

    Ivanovic Vladan B.

    2011-01-01

    Full Text Available After the last revitalization of thermal power block of 100 MW in TPP “Kostolac A”, made in the year 2004, during the operation of the plant, pulverized coal deposition often occurred in horizontal sections of the aero-mixture channels. Deposition phenomenon manifested itself in places ahead of spherical compensators in the direction of flow of pulverized coal to the burners, due to unfavorable configuration of these channels. Coal dust deposited in the channels dried and spontaneously combusted, causing numerous damage to channels and its isolation as well as the frequent stoppage of the operation for necessary interventions. The paper presents the original solution of reconstruction of aero-mixture channels which prevented deposition of coal dust and its eventual ignition. In this way the reliability of the mill plant is maximized and higher availability of boiler and block as a whole is achieved.

  14. Aero-structural optimization of wind turbine blades using a reduced set of design load cases including turbulence

    DEFF Research Database (Denmark)

    Sessarego, Matias; Shen, Wen Zhong

    2018-01-01

    Modern wind turbine aero-structural blade design codes generally use a smaller fraction of the full design load base (DLB) or neglect turbulent inflow as defined by the International Electrotechnical Commission standards. The current article describes an automated blade design optimization method...... based on surrogate modeling that includes a very large number of design load cases (DLCs) including turbulence. In the present work, 325 DLCs representative of the full DLB are selected based on the message-passing-interface (MPI) limitations in Matlab. Other methods are currently being investigated, e.......g. a Python MPI implementation, to overcome the limitations in Matlab MPI and ultimately achieve a full DLB optimization framework. The reduced DLB and the annual energy production are computed using the state-of-the-art aero-servo-elastic tool HAWC2. Furthermore, some of the interior dimensions of the blade...

  15. Improvement on Main/backup Controller Switching Device of the Nozzle Throat Area Control System for a Turbofan Aero Engine

    Science.gov (United States)

    Li, Jie; Duan, Minghu; Yan, Maode; Li, Gang; Li, Xiaohui

    2014-06-01

    A full authority digital electronic controller (FADEC) equipped with a full authority hydro-mechanical backup controller (FAHMBC) is adopted as the nozzle throat area control system (NTACS) of a turbofan aero engine. In order to ensure the switching reliability of the main/backup controller, the nozzle throat area control switching valve was improved from three-way convex desktop slide valve to six-way convex desktop slide valve. Simulation results show that, if malfunctions of FAEDC occur and abnormal signals are outputted from FADEC, NTACS will be seriously influenced by the main/backup controller switching in several working states, while NTACS will not be influenced by using the improved nozzle throat area control switching valve, thus the controller switching process will become safer and smoother and the working reliability of this turbofan aero engine is improved by the controller switching device improvement.

  16. Applied Ethics in Nowadays Society

    OpenAIRE

    Tomita CIULEI

    2013-01-01

    This special issue is dedicated to Nowadays Applied Ethics in Society, and falls in the field of social sciences and humanities, being hosted both theoretical approaches and empirical research in various areas of applied ethics. Applied ethics analyzes of a series of morally concrete situations of social or professional practice in order to make / adopt decisions. In the field of applied ethics are integrated medical ethics, legal ethics, media ethics, professional ethics, environmental ethic...

  17. Turbofan Volume Dynamics Model for Investigations of Aero-Propulso-Servo-Elastic Effects in a Supersonic Commercial Transport

    Science.gov (United States)

    Connolly, Joseph W.; Kopasakis, George; Lemon, Kimberly A.

    2010-01-01

    A turbofan simulation has been developed for use in aero-propulso-servo-elastic coupling studies, on supersonic vehicles. A one-dimensional lumped volume approach is used whereby each component (fan, high-pressure compressor, combustor, etc.) is represented as a single volume using characteristic performance maps and conservation equations for continuity, momentum and energy. The simulation is developed in the MATLAB/SIMULINK (The MathWorks, Inc.) environment in order to facilitate controls development, and ease of integration with a future aero-servo-elastic vehicle model being developed at NASA Langley. The complete simulation demonstrated steady state results that closely match a proposed engine suitable for a supersonic business jet at the cruise condition. Preliminary investigation of the transient simulation revealed expected trends for fuel flow disturbances as well as upstream pressure disturbances. A framework for system identification enables development of linear models for controller design. Utilizing this framework, a transfer function modeling an upstream pressure disturbance s impacts on the engine speed is developed as an illustrative case of the system identification. This work will eventually enable an overall vehicle aero-propulso-servo-elastic model

  18. Protection of quality and innovation in radiation oncology: The prospective multicenter trial the German Society of Radiation Oncology (DEGRO-QUIRO study). Evaluation of time, attendance of medical staff, and resources during radiotherapy with IMRT

    International Nuclear Information System (INIS)

    Vorwerk, H.; Schiller, R.; Zink, K.; Engenhart-Cabillic, R.; Budach, V.; Boehmer, D.; Kampfer, S.; Popp, W.; Sack, H.

    2014-01-01

    A number of national and international societies published recommendations regarding the required equipment and manpower assumed to be necessary to treat a number of patients with radiotherapy. None of these recommendations were based on actual time measurements needed for specific radiotherapy procedures. The German Society of Radiation Oncology (DEGRO) was interested in substantiating these recommendations by prospective evaluations of all important core procedures of radiotherapy in the most frequent cancers treated by radiotherapy. The results of the examinations of radiotherapy with intensity-modulated radiation therapy (IMRT) in patients with different tumor entities are presented in this manuscript. Four radiation therapy centers [University Hospital of Marburg, University Hospital of Giessen, University Hospital of Berlin (Charite), Klinikum rechts der Isar der Technischen Universitaet Muenchen] participated in this prospective study. The workload of the different occupational groups and room occupancies for the core procedures of radiotherapy were prospectively documented during a 2-month period per center and subsequently statistically analyzed. The time needed per patient varied considerably between individual patients and between centers for all the evaluated procedures. The technical preparation (contouring of target volume and organs at risk, treatment planning, and approval of treatment plan) was the most time-consuming process taking 3 h 54 min on average. The time taken by the medical physicists for this procedure amounted to about 57 %. The training part of the preparation time was 87 % of the measured time for the senior physician and resident. The total workload for all involved personnel comprised 74.9 min of manpower for the first treatment, 39.7 min for a routine treatment with image guidance, and 22.8 min without image guidance. The mean room occupancy varied between 10.6 min (routine treatment without image guidance) and 23.7 min (first

  19. Simultaneous validation of the SunTech CT40 automated blood pressure measurement device by the 1993 British Hypertension Society protocol and the Association for the Advancement of Medical Instrumentation/International Organization for Standardization 81060-2: 2013 standard.

    Science.gov (United States)

    Polo Friz, Hernan; Punzi, Veronica; Petri, Francesco; Orlandi, Riccardo; Maggiolini, Daniele; Polo Friz, Melisa; Primitz, Laura; Vighi, Giuseppe

    2017-10-01

    This study aimed to perform a simultaneous, third-party, independent validation of the oscillometric SunTech CT40 device for blood pressure (BP) measurement, according to the 1993 protocol of the British Hypertension Society and the standard of the Association for the Advancement of Medical Instrumentation (AAMI)/the International Organization for Standardization (ISO) 81060-2:2013. Patient recruitment, study procedures, and data analysis followed the recommendations stated by the protocols. The study was approved by the institutional review board. A total of 94 participants were included, 52 (55.3%) women, mean±SD age: 63.1±18.0 years, mean±SD arm circumference: 35.0±9.0 cm. The average of observers' entry BPs was 146.9±37.2 mmHg for systolic blood pressure (SBP) and 82.2±22.1 mmHg for diastolic blood pressure (DBP). Differences between the standard measurement and the test device within 5, 10, and 15 mmHg, for the better observer, were 79.4, 96.5, and 100.0% for SBP and 82.6, 97.5, and 100.0% for DBP, respectively. The mean±SD differences between the readings obtained using the test device and those obtained by the observers (AAMI/ISO 81060-2:2013 standard criterion 1) were 0.3±5.0 mmHg (SBP) and -0.8±4.3 mmHg (DBP), and the mean±SD differences between average of reference readings and average of test device readings in each patient (criterion 2) were 0.3±3.9 and -0.8±3.5 mmHg for SBP and DBP, respectively. The CT40 BP device achieved A/A grade of the British Hypertension Society protocol and fulfilled the requirements (criteria 1 and 2) of the AAMI/ISO standard. CT40 can be recommended for BP measurement in adults.

  20. Integrated approach for stress based lifing of aero gas turbine blades

    Science.gov (United States)

    Abu, Abdullahi Obonyegba

    In order to analyse the turbine blade life, the damage due to the combined thermal and mechanical loads should be adequately accounted for. This is more challenging when detailed component geometry is limited. Therefore, a compromise between the level of geometric detail and the complexity of the lifing method to be implemented would be necessary. This research focuses on how the life assessment of aero engine turbine blades can be done, considering the balance between available design inputs and adequate level of fidelity. Accordingly, the thesis contributes to developing a generic turbine blade lifing method that is based on the engine thermodynamic cycle; as well as integrating critical design/technological factors and operational parameters that influence the aero engine blade life. To this end, thermo-mechanical fatigue was identified as the critical damage phenomenon driving the life of the turbine blade.. The developed approach integrates software tools and numerical models created using the minimum design information typically available at the early design stages. Using finite element analysis of an idealised blade geometry, the approach captures relevant impacts of thermal gradients and thermal stresses that contribute to the thermo-mechanical fatigue damage on the gas turbine blade. The blade life is evaluated using the Neu/Sehitoglu thermo-mechanical fatigue model that considers damage accumulation due to fatigue, oxidation, and creep. The leading edge is examined as a critical part of the blade to estimate the damage severity for different design factors and operational parameters. The outputs of the research can be used to better understand how the environment and the operating conditions of the aircraft affect the blade life consumption and therefore what is the impact on the maintenance cost and the availability of the propulsion system. This research also finds that the environmental (oxidation) effect drives the blade life and the blade coolant

  1. American Society of Echocardiography

    Science.gov (United States)

    American Society of Echocardiography Join Ase Renew Member Portal Log In Membership Member Portal Log In Join ASE Renew Benefits Rates FASE – Fellow of the American Society of Echocardiography Member Referral Program FAQs Initiatives Advocacy Awards, Grants, ...

  2. Reclaiming Society Publishing

    Directory of Open Access Journals (Sweden)

    Philip E. Steinberg

    2015-07-01

    Full Text Available Learned societies have become aligned with commercial publishers, who have increasingly taken over the latter’s function as independent providers of scholarly information. Using the example of geographical societies, the advantages and disadvantages of this trend are examined. It is argued that in an era of digital publication, learned societies can offer leadership with a new model of open access that can guarantee high quality scholarly material whose publication costs are supported by society membership dues.

  3. Review of modern low emissions combustion technologies for aero gas turbine engines

    Science.gov (United States)

    Liu, Yize; Sun, Xiaoxiao; Sethi, Vishal; Nalianda, Devaiah; Li, Yi-Guang; Wang, Lu

    2017-10-01

    Pollutant emissions from aircraft in the vicinity of airports and at altitude are of great public concern due to their impact on environment and human health. The legislations aimed at limiting aircraft emissions have become more stringent over the past few decades. This has resulted in an urgent need to develop low emissions combustors in order to meet legislative requirements and reduce the impact of civil aviation on the environment. This article provides a comprehensive review of low emissions combustion technologies for modern aero gas turbines. The review considers current high Technologies Readiness Level (TRL) technologies including Rich-Burn Quick-quench Lean-burn (RQL), Double Annular Combustor (DAC), Twin Annular Premixing Swirler combustors (TAPS), Lean Direct Injection (LDI). It further reviews some of the advanced technologies at lower TRL. These include NASA multi-point LDI, Lean Premixed Prevaporised (LPP), Axially Staged Combustors (ASC) and Variable Geometry Combustors (VGC). The focus of the review is placed on working principles, a review of the key technologies (includes the key technology features, methods of realising the technology, associated technology advantages and design challenges, progress in development), technology application and emissions mitigation potential. The article concludes the technology review by providing a technology evaluation matrix based on a number of combustion performance criteria including altitude relight auto-ignition flashback, combustion stability, combustion efficiency, pressure loss, size and weight, liner life and exit temperature distribution.

  4. Propulsion System Dynamic Modeling for the NASA Supersonic Concept Vehicle: AeroPropulsoServoElasticity

    Science.gov (United States)

    Kopasakis, George; Connolly, Joseph; Seidel, Jonathan

    2014-01-01

    A summary of the propulsion system modeling under NASA's High Speed Project (HSP) AeroPropulsoServoElasticity (APSE) task is provided with a focus on the propulsion system for the low-boom supersonic configuration developed by Lockheed Martin and referred to as the N+2 configuration. This summary includes details on the effort to date to develop computational models for the various propulsion system components. The objective of this paper is to summarize the model development effort in this task, while providing more detail in the modeling areas that have not been previously published. The purpose of the propulsion system modeling and the overall APSE effort is to develop an integrated dynamic vehicle model to conduct appropriate unsteady analysis of supersonic vehicle performance. This integrated APSE system model concept includes the propulsion system model, and the vehicle structural-aerodynamics model. The development to date of such a preliminary integrated model will also be summarized in this report.propulsion system dynamics, the structural dynamics, and aerodynamics.

  5. A novel full scale experimental characterization of wind turbine aero-acoustic noise sources - preliminary results

    DEFF Research Database (Denmark)

    Aagaard Madsen, Helge; Bertagnolio, Franck; Fischer, Andreas

    2016-01-01

    of the blade and the noise on the ground in a distance of about one rotor diameter. In total six surface microphones were used to measure the SP at the leading edge (LE) and trailing edge (TE) of the blade. In parallel noise was measured by eight microphones placed on plates on the ground around the turbine......The paper describes a novel full scale experiment on a 500 kW wind turbine with the main objective to characterize the aero-acoustic noise sources. The idea behind the instrumentation is to study the link and correlation between the surface pressure (SP) fluctuations in the boundary layer...... in equidistant angles on a circle with a radius of about one rotor diameter. The data were analyzed in segments of 2.2 s which is the time for one rotor revolution. The spectra for the TE microphones on the suction side of the blade show a characteristic roll-off pattern around a frequency of 600-700 Hz...

  6. New design of a compact aero-robotic drilling end effector: An experimental analysis

    Directory of Open Access Journals (Sweden)

    Shi Zhenyun

    2016-08-01

    Full Text Available This paper presents the development of a normal adjustment cell (NAC in aero-robotic drilling to improve the quality of vertical drilling, by using an intelligent double-eccentric disk normal adjustment mechanism (2-EDNA, a spherical plain bearing and a floating compress module with sensors. After the surface normal vector is calculated based on the laser sensors’ feedback, the 2-EDNA concept is conceived specifically to address the deviation of the spindle from the surface normal at the drilling point. Following the angle calculation, depending on the actual initial position, two precise eccentric disks (PEDs with an identical eccentric radius are used to rotate with the appropriate angles using two high-resolution DC servomotors. The two PEDs will carry the spindle to coincide with the surface normal, keeping the vertex of the drill bit still to avoid repeated adjustment and position compensation. A series of experiments was conducted on an aeronautical drilling robot platform with a precise NAC. The effect of normal adjustment on bore diameter, drilling force, burr size, drilling heat, and tool wear was analyzed. The results validate that using the NAC in robotic drilling results in greatly improved vertical drilling quality and is attainable in terms of intelligence and accuracy.

  7. Dynamic behavior of aero-engine rotor with fusing design suffering blade off

    Directory of Open Access Journals (Sweden)

    Cun WANG

    2017-06-01

    Full Text Available Fan blade off (FBO from a running turbofan rotor will introduce sudden unbalance into the dynamical system, which will lead to the rub-impact, the asymmetry of rotor and a series of interesting dynamic behavior. The paper first presents a theoretical study on the response excited by sudden unbalance. The results reveal that the reaction force of the bearing located near the fan could always reach a very high value which may lead to the crush of ball, journal sticking, high stress on the other components and some other failures to endanger the safety of engine in FBO event. Therefore, the dynamic influence of a safety design named “fusing” is investigated by mechanism analysis. Meantime, an explicit FBO model is established to simulate the FBO event, and evaluate the effectiveness and potential dynamic influence of fusing design. The results show that the fusing design could reduce the vibration amplitude of rotor, the reaction force on most bearings and loads on mounts, but the sudden change of support stiffness induced by fusing could produce an impact effect which will couple with the influence of sudden unbalance. Therefore, the implementation of the design should be considered carefully with optimized parameters in actual aero-engine.

  8. Unusual structure in forsterite glass synthesized by an aero-acoustic levitation technique

    International Nuclear Information System (INIS)

    Kohara, Shinji; Suzuya, Kentaro; Takeuchi, Ken

    2005-01-01

    Forsterite Mg 2 SiO 4 exhibits an orthorhombic structure consisted of two kinds of MgO 6 octahedra. One of them forms edge-sharing ribbons along the [001] direction which are linked by the other kind of edge-sharing MgO 6 octahedra, resulting in a three-dimensional framework. Given only 33.3 mol% of SiO 2 in the material, the SiO 4 tetrahedra are isolated within the framework, sharing the O-O bonds with the common edges of the MgO 6 octahedra. If forsterite can be vitrified, an interesting question concerning the glass structure arises because there is insufficient glass forming SiO 2 to establish the corner-sharing SiO 4 tetrahedral net-work needed in conventional silicate glasses. A bulk Mg 2 SiO 4 glass was synthesized using an aero-acoustic levitation technique and to visualize the short-to intermediate-range structure by a combined high-energy synchrotron x-ray and neutron diffraction and reverse Monte Carlo computer simulation. We found that the role of network former is largely taken on by corner-and edge-sharing ionic magnesium species that adopt 4-, 5- and 6-coordination with oxygen. (author)

  9. Uncertainty of measurement for large product verification: evaluation of large aero gas turbine engine datums

    International Nuclear Information System (INIS)

    Muelaner, J E; Wang, Z; Keogh, P S; Brownell, J; Fisher, D

    2016-01-01

    Understanding the uncertainty of dimensional measurements for large products such as aircraft, spacecraft and wind turbines is fundamental to improving efficiency in these products. Much work has been done to ascertain the uncertainty associated with the main types of instruments used, based on laser tracking and photogrammetry, and the propagation of this uncertainty through networked measurements. Unfortunately this is not sufficient to understand the combined uncertainty of industrial measurements, which include secondary tooling and datum structures used to locate the coordinate frame. This paper presents for the first time a complete evaluation of the uncertainty of large scale industrial measurement processes. Generic analysis and design rules are proven through uncertainty evaluation and optimization for the measurement of a large aero gas turbine engine. This shows how the instrument uncertainty can be considered to be negligible. Before optimization the dominant source of uncertainty was the tooling design, after optimization the dominant source was thermal expansion of the engine; meaning that no further improvement can be made without measurement in a temperature controlled environment. These results will have a significant impact on the ability of aircraft and wind turbines to improve efficiency and therefore reduce carbon emissions, as well as the improved reliability of these products. (paper)

  10. Towards an Aero-Propulso-Servo-Elasticity Analysis of a Commercial Supersonic Transport

    Science.gov (United States)

    Connolly, Joseph W.; Kopasakis, George; Chwalowski, Pawel; Sanetrik, Mark D.; Carlson, Jan-Renee; Silva, Walt A.; McNamara, Jack

    2016-01-01

    This paper covers the development of an aero-propulso-servo-elastic (APSE) model using computational fluid dynamics (CFD) and linear structural deformations. The APSE model provides the integration of the following two previously developed nonlinear dynamic simulations: a variable cycle turbofan engine and an elastic supersonic commercial transport vehicle. The primary focus of this study is to provide a means to include relevant dynamics of a turbomachinery propulsion system into the aeroelastic studies conducted during a vehicle design, which have historically neglected propulsion effects. A high fidelity CFD tool is used here for the integration platform. The elastic vehicle neglecting the propulsion system serves as a comparison of traditional approaches to the APSE results. An overview of the methodology is presented for integrating the propulsion system and elastic vehicle. Static aeroelastic analysis comparisons between the traditional and developed APSE models for a wing tip detection indicate that the propulsion system impact on the vehicle elastic response could increase the detection by approximately ten percent.

  11. Aero-hydro-elastic simulation platform for wave energy systems and floating wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Kallesoee, B.S.

    2011-01-15

    This report present results from the PSO project 2008-1-10092 entitled Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines that deals with measurements, modelling and simulations of the world's first combined wave and wind energy platform. The floating energy conversion platform, Poseidon, is owned and operated by Floating Power Plant A/S. The platform has been operating for two test periods; one period where it was operating as a wave energy conversion platform only and one period where the three turbines was mounted and the platform operated as a combined wind and wave energy platform. The PSO project has equipped the platform with comprehensive measurements equipment for measuring platform motion, wave and wind conditions and turbine loads. Data from the first test period has been used for determine if the turbine could be mounted on the platform. Preliminary analysis of data from the second test period indicates that the platform is suitable as wind turbine foundation and that the turbines reduce the platform motion. (Author)

  12. AEROS: a real-time emergency response system for atmospheric releases of toxic material

    International Nuclear Information System (INIS)

    Nasstrom, J.S.; Greenly, G.D.

    1986-01-01

    The Atmospheric Release Advisory Capability (ARAC) at the Lawrence Livermore National Laboratory has developed a sophisticated computer-based real-time emergency response system for radiotoxic releases into the atmosphere. The ARAC Emergency Response Operating System (AEROS) has a centralized computer facility linked to remote site computers, meteorological towers, and meteorological data sources. The system supports certain fixed sites, but has the ability to respond to accidents at arbitrary locations. Product quality and response time are optimized by using complex three-dimensional dispersion models; extensive on-line data bases; automated data processing; and an efficient user interface, employing graphical computer displays and computer-displayed forms. Upon notification, the system automatically initiates a response to an emergency and proceeds through preliminary calculations, automatically processing accident information, meteorological data, and model parameters. The model calculations incorporate mass-consistent three-dimensional wind fields, terrain effects, and particle-in-cell diffusion. Model products are color images of dose or deposition contours overlaid on a base map

  13. Aero Engine Component Fault Diagnosis Using Multi-Hidden-Layer Extreme Learning Machine with Optimized Structure

    Directory of Open Access Journals (Sweden)

    Shan Pang

    2016-01-01

    Full Text Available A new aero gas turbine engine gas path component fault diagnosis method based on multi-hidden-layer extreme learning machine with optimized structure (OM-ELM was proposed. OM-ELM employs quantum-behaved particle swarm optimization to automatically obtain the optimal network structure according to both the root mean square error on training data set and the norm of output weights. The proposed method is applied to handwritten recognition data set and a gas turbine engine diagnostic application and is compared with basic ELM, multi-hidden-layer ELM, and two state-of-the-art deep learning algorithms: deep belief network and the stacked denoising autoencoder. Results show that, with optimized network structure, OM-ELM obtains better test accuracy in both applications and is more robust to sensor noise. Meanwhile it controls the model complexity and needs far less hidden nodes than multi-hidden-layer ELM, thus saving computer memory and making it more efficient to implement. All these advantages make our method an effective and reliable tool for engine component fault diagnosis tool.

  14. The Information Society

    Directory of Open Access Journals (Sweden)

    Hiranya Nath

    2017-03-01

    Full Text Available This article briefly discusses various definitions and concepts of the so-called information society. The term information society has been proposed to refer to the post-industrial society in which information plays a pivotal role. The definitions that have been proposed over the years highlight five underlying characterisations of an information society: technological, economic, sociological, spatial, and cultural. This article discusses those characteristics. While the emergence of an information society may be just a figment of one’s imagination, the concept could be a good organising principle to describe and analyse the changes of the past 50 years and of the future in the 21st century.

  15. Cooperating to Compete in the Global Air Cargo Industry: The Case of the DHL Express and Lufthansa Cargo A.G. Joint Venture Airline ‘AeroLogic’

    Directory of Open Access Journals (Sweden)

    Glenn Baxter

    2018-03-01

    Full Text Available This paper presents a case study of the DHL Express and Lufthansa Cargo strategic joint venture cargo airline ‘AeroLogic’, the global air cargo industry’s largest operative joint venture between an airline and a leading international express and logistics provider. The study used a qualitative research approach. The data gathered for the study was examined by document analysis. The strategic analysis of the AeroLogic joint venture was based on the use of Porter’s Five Forces framework. The study found that the AeroLogic joint venture airline has provided synergistic benefits to both partners and has allowed the partners to access new markets and to participate in the evolution of the air cargo industry. The new venture has also enabled both joint venture partners to enhance their competitive position in the global air cargo industry through strengthened service offerings and has provided the partners with increased cargo capacities, a larger route network, and greater frequencies within their own route networks. The study also found that the AeroLogic business model is unique in the air cargo industry. A limitation of the study was that AeroLogic’s annual revenue or freight traffic data was not available. It was, therefore, not possible to analyse the business performance of the joint venture.

  16. Indian Vacuum Society: The Indian Vacuum Society

    Science.gov (United States)

    Saha, T. K.

    2008-03-01

    The Indian Vacuum Society (IVS) was established in 1970. It has over 800 members including many from Industry and R & D Institutions spread throughout India. The society has an active chapter at Kolkata. The society was formed with the main aim to promote, encourage and develop the growth of Vacuum Science, Techniques and Applications in India. In order to achieve this aim it has conducted a number of short term courses at graduate and technician levels on vacuum science and technology on topics ranging from low vacuum to ultrahigh vacuum So far it has conducted 39 such courses at different parts of the country and imparted training to more than 1200 persons in the field. Some of these courses were in-plant training courses conducted on the premises of the establishment and designed to take care of the special needs of the establishment. IVS also regularly conducts national and international seminars and symposia on vacuum science and technology with special emphasis on some theme related to applications of vacuum. A large number of delegates from all over India take part in the deliberations of such seminars and symposia and present their work. IVS also arranges technical visits to different industries and research institutes. The society also helped in the UNESCO sponsored post-graduate level courses in vacuum science, technology and applications conducted by Mumbai University. The society has also designed a certificate and diploma course for graduate level students studying vacuum science and technology and has submitted a syllabus to the academic council of the University of Mumbai for their approval, we hope that some colleges affiliated to the university will start this course from the coming academic year. IVS extended its support in standardizing many of the vacuum instruments and played a vital role in helping to set up a Regional Testing Centre along with BARC. As part of the development of vacuum education, the society arranges the participation of

  17. Civil Society and Governance

    DEFF Research Database (Denmark)

    Hulgård, Lars

    An illustration of how important the relationship is between civil society anbd governance. A short historic journey with four snapshots of times and situations that have provided interesting evidence about the connection between civil society and governance. My goal for the short historic journey...... is to make clear and hopefully even verify that providing knowledge about the impact of civil society and citizens’ participation on governance is one of the most urgent research tasks in the current period of time....

  18. Feasibility investigation of coupling a desalination prototype functioning by Aero-Evapo-Condensation with solar units

    International Nuclear Information System (INIS)

    Bourouni, K.; Bouden, C.; Chaibi, M.

    2003-01-01

    The rural regions of south Mediterranean countries suffer from problems of drinking water supply. However, the majority of these regions have important resources of brackish salt water. Thus, brackish water desalination on a small scale presents a potential solution to this problem. For this reason, a number of small desalination prototypes are being developed worldwide. Bourouni et al. have developed a water desalination unit functioning by the Aero-Evapo-Condensation-Process (AECP) in order to satisfy this kind of water demand. One of the advantages of this prototype is that it allows the use of low temperature energy such as geothermal and solar energies abundant in these countries. An initial experiment was carried on an AECP prototype coupled to a geothermal spring in the south of Tunisia. The results relative to the technical and economic performances of the unit have shown that this kind of coupling is promising. On the other hand, the brackish water springs in these countries are often non-geothermal. In this case, the use of solar energy can be considered. Thus, we develop, in the present article, a feasibility investigation on the coupling of the AECP prototype with solar units. In fact, we analyse, in the first part of this article, the possibilities of this coupling in a manner that the functioning mode of the solar units will be compatible with that of the AECP prototype. To attempt this objective, two kinds of solar installation scenarios are considered and modelled to obtain their energetic contribution. Hence, the elaborated models are coupled to the one developed by Bourouni et al. for the AECP prototype to determine the technical and economic performances of the whole installation. In the last part of this article, a solar unit dimensioning is performed in order to minimise the total cost of the distilled water. (author)

  19. Dynamic modeling and vibration characteristics analysis of the aero-engine dual-rotor system with Fan blade out

    Science.gov (United States)

    Yu, Pingchao; Zhang, Dayi; Ma, Yanhong; Hong, Jie

    2018-06-01

    Fan Blade Out (FBO) from a running rotor of the turbofan engine will not only introduce the sudden unbalance and inertia asymmetry into the rotor, but also apply large impact load and induce rotor-to-stator rubbing on the rotor, which makes the mass, gyroscopic and stiffness matrixes of the dynamic equation become time-varying and highly nonlinear, consequently leads to the system's complicated vibration. The dynamic analysis of the aero-engine rotor system is one essential requirement of the authorities and is vital to the aero-engine's safety. The paper aims at studying the dynamic responses of the complicated dual-rotor systems at instantaneous and windmilling statuses when FBO event occurs. The physical process and mechanical characteristics of the FBO event are described qualitatively, based on which the dynamic modeling for an aero-engine dual-rotor system is carried out considering several excitations caused by FBO. Meanwhile the transient response during the instantaneous status and steady-state response at the windmilling status are obtained. The results reveal that the sudden unbalance can induce impact load to the rotor, and lead to the sharp increase of the vibration amplitude and reaction force. The rub-impact will apply constraint effects on the rotor and restrict the transient vibration amplitude, while the inertia asymmetry has little influence on the transient response. When the rotor with huge unbalance operates at windmilling status, the rub-impact turns to be the main factor determining the rotor's dynamic behavior, and several potential motion states, such as instable dry whip, intermittent rubbing and synchronous full annular rubbing would happen on certain conditions.

  20. American Society of Nephrology

    Science.gov (United States)

    ... on Twitter .@US_FDA issues safety alert for #gout medication | @renalandurology https://t.co/gxilPolsyH – @ASNKidney on Twitter Medical first: Doctors attempt to gene-edit a living patient's DNA | @CNN https://t. ...

  1. Small wind turbine performance evaluation using field test data and a coupled aero-electro-mechanical model

    Science.gov (United States)

    Wallace, Brian D.

    A series of field tests and theoretical analyses were performed on various wind turbine rotor designs at two Penn State residential-scale wind-electric facilities. This work involved the prediction and experimental measurement of the electrical and aerodynamic performance of three wind turbines; a 3 kW rated Whisper 175, 2.4 kW rated Skystream 3.7, and the Penn State designed Carolus wind turbine. Both the Skystream and Whisper 175 wind turbines are OEM blades which were originally installed at the facilities. The Carolus rotor is a carbon-fiber composite 2-bladed machine, designed and assembled at Penn State, with the intent of replacing the Whisper 175 rotor at the off-grid system. Rotor aerodynamic performance is modeled using WT_Perf, a National Renewable Energy Laboratory developed Blade Element Momentum theory based performance prediction code. Steady-state power curves are predicted by coupling experimentally determined electrical characteristics with the aerodynamic performance of the rotor simulated with WT_Perf. A dynamometer test stand is used to establish the electromechanical efficiencies of the wind-electric system generator. Through the coupling of WT_Perf and dynamometer test results, an aero-electro-mechanical analysis procedure is developed and provides accurate predictions of wind system performance. The analysis of three different wind turbines gives a comprehensive assessment of the capability of the field test facilities and the accuracy of aero-electro-mechanical analysis procedures. Results from this study show that the Carolus and Whisper 175 rotors are running at higher tip-speed ratios than are optimum for power production. The aero-electro-mechanical analysis predicted the high operating tip-speed ratios of the rotors and was accurate at predicting output power for the systems. It is shown that the wind turbines operate at high tip-speeds because of a miss-match between the aerodynamic drive torque and the operating torque of the wind

  2. PREFACE: The 2nd International Conference on Geological, Geographical, Aerospace and Earth Sciences 2014 (AeroEarth 2014)

    Science.gov (United States)

    Lumban Gaol, Ford; Soewito, Benfano

    2015-01-01

    The 2nd International Conference on Geological, Geographical, Aerospace and Earth Sciences 2014 (AeroEarth 2014), was held at Discovery Kartika Plaza Hotel, Kuta, Bali, Indonesia during 11 - 12 October 2014. The AeroEarth 2014 conference aims to bring together researchers and engineers from around the world. Through research and development, earth scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. Earth provides resources and the exact conditions to make life possible. However, with the advent of technology and industrialization, the Earth's resources are being pushed to the brink of depletion. Non-sustainable industrial practices are not only endangering the supply of the Earth's natural resources, but are also putting burden on life itself by bringing about pollution and climate change. A major role of earth science scholars is to examine the delicate balance between the Earth's resources and the growing demands of industrialization. Through research and development, earth scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 98 papers and after rigorous review, 17 papers were accepted. The participants come from eight countries. There are four Parallel Sessions and two invited Speakers. It is an honour to present this volume of IOP Conference Series: Earth and Environmental Science (EES) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee

  3. Smart rotor modeling aero-servo-elastic modeling of a smart rotor with adaptive trailing edge flaps

    CERN Document Server

    Bergami, Leonardo

    2014-01-01

    A smart rotor is a wind turbine rotor that, through a combination of sensors, control units and actuators actively reduces the variation of the aerodynamic loads it has to withstand. Smart rotors feature?promising load alleviation potential and might provide the technological breakthrough required by the next generation of large wind turbine rotors.The book presents the aero-servo-elastic model of a smart rotor with Adaptive Trailing Edge Flaps for active load alleviation and provides an insight on the rotor aerodynamic, structural and control modeling. A novel model for the unsteady aerodynam

  4. Society-ethics-risk

    International Nuclear Information System (INIS)

    Ruh, H.; Seiler, H.

    1993-01-01

    The aim of the workshops which was reported in this volume, was the interpretation and evaluation of catastrophic risks for society in an interdisciplinary dialogue between representation of society, ethics, as well as natural science and technology. (author) figs., tabs., refs

  5. European Respiratory Society statement

    DEFF Research Database (Denmark)

    Miravitlles, Marc; Dirksen, Asger; Ferrarotti, Ilaria

    2017-01-01

    lung disease. A large proportion of individuals affected remain undiagnosed and therefore without access to appropriate care and treatment.The most recent international statement on AATD was published by the American Thoracic Society and the European Respiratory Society in 2003. Since then there has...

  6. World Society and Globalisation

    Science.gov (United States)

    Wittmann, Veronika

    2014-01-01

    Purpose: The purpose of this paper is to illustrate discourses on globalisation and world society and to disclose the commonalities and differences of both scientific debates. In particular, it draws attention to theoretical concepts of globalisation and world society. This is considered fruitful for comprehending the complex mechanisms of…

  7. Refractions of Civil Society

    DEFF Research Database (Denmark)

    Kuzmanovic, Daniella

    The thesis investigates various perceptions of civil society among civic activists in Turkey, and how these perceptions are produced and shaped. The thesis is an anthropological contribution to studies of civil society in general, as well as to studies on political culture in Turkey....

  8. Transformation of Neolithic Societies

    DEFF Research Database (Denmark)

    Iversen, Rune

    and prepared the way for the appearance of Bronze Age societies. The great era of megalithic architecture came to an end as the production and exchange of gold, copper and bronze objects became the driving force in the development of Copper and Bronze Age societies. This development also had a great influence...

  9. One Generation of New Material, One Generation of New Type Engine:Development Trend of Aero-engine and Its Requirements for Materials

    Directory of Open Access Journals (Sweden)

    LIU Da-xiang

    2017-10-01

    Full Text Available Based on the brief review of accelerated developing status of aircraft power technology in the world, the present status and developing trend of key materials technology for aero-engine were analyzed. In accordance with the idea of "one generation of new material, one generation of new type engine", development requirements for the materials technology of the system and main parts of aero-engine were proposed. Suggestions for improving development and application level of the materials technology in China were presented from aspects of quality stability and technical maturity, investigation and verification for engineering, materials system and data, composite materials, airworthiness certificate,etc.

  10. Modeling C-Band Co-Channel Interference From AeroMACS Omni-Directional Antennas to Mobile Satellite Service Feeder Uplinks

    Science.gov (United States)

    Wilson, Jeffrey D.

    2011-01-01

    A new C-band (5091 to 5150 MHz) airport communications system designated as Aeronautical Mobile Airport Communications System (AeroMACS) is being planned under the Federal Aviation Administration s NextGen program. An interference analysis software program, Visualyse Professional (Transfinite Systems Ltd), is being utilized to provide guidelines on limitations for AeroMACS transmitters to avoid interference with other systems. A scenario consisting of a single omni-directional transmitting antenna at each of the major contiguous United States airports is modeled and the steps required to build the model are reported. The results are shown to agree very well with a previous study.

  11. World Federation of Vascular Societies: presidential address

    DEFF Research Database (Denmark)

    Sillesen, Henrik Hegaard

    2010-01-01

    The presidential address describes briefly the history of the World Federation for Vascular Societies (WFVS) and its objectives. Vascular Surgery today includes interventional procedures (open surgical and endovascular) in addition to risk factor reduction and medical treatment. It is equally imp...... throughout the world. In addition, for introduction of new treatments, training issues and dissemination of science a global organisation like the WFVS is needed.......The presidential address describes briefly the history of the World Federation for Vascular Societies (WFVS) and its objectives. Vascular Surgery today includes interventional procedures (open surgical and endovascular) in addition to risk factor reduction and medical treatment. It is equally...

  12. Protection of quality and innovation in radiation oncology: The prospective multicenter trial the German Society of Radiation Oncology (DEGRO-QUIRO study). Evaluation of time, attendance of medical staff, and resources during radiotherapy with IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Vorwerk, H.; Schiller, R. [University of Marburg, Department of Radiotherapy and Radiooncology, Marburg (Germany); Zink, K.; Engenhart-Cabillic, R. [University of Marburg, Department of Radiotherapy and Radiooncology, Marburg (Germany); University of Giessen, Department of Radiotherapy and Radiooncology, Giessen (Germany); Budach, V.; Boehmer, D. [Charite, University of Berlin, Department of Radiotherapy and Radiooncology, Berlin (Germany); Kampfer, S. [Technische Universitaet Muenchen, Department of Radiation-Oncology, Muenchen (Germany); Popp, W. [Prime Networks AG, Basel (Switzerland); Sack, H. [University of Essen, Department of Radiotherapy and Radiooncology, Essen (Germany)

    2014-05-15

    A number of national and international societies published recommendations regarding the required equipment and manpower assumed to be necessary to treat a number of patients with radiotherapy. None of these recommendations were based on actual time measurements needed for specific radiotherapy procedures. The German Society of Radiation Oncology (DEGRO) was interested in substantiating these recommendations by prospective evaluations of all important core procedures of radiotherapy in the most frequent cancers treated by radiotherapy. The results of the examinations of radiotherapy with intensity-modulated radiation therapy (IMRT) in patients with different tumor entities are presented in this manuscript. Four radiation therapy centers [University Hospital of Marburg, University Hospital of Giessen, University Hospital of Berlin (Charite), Klinikum rechts der Isar der Technischen Universitaet Muenchen] participated in this prospective study. The workload of the different occupational groups and room occupancies for the core procedures of radiotherapy were prospectively documented during a 2-month period per center and subsequently statistically analyzed. The time needed per patient varied considerably between individual patients and between centers for all the evaluated procedures. The technical preparation (contouring of target volume and organs at risk, treatment planning, and approval of treatment plan) was the most time-consuming process taking 3 h 54 min on average. The time taken by the medical physicists for this procedure amounted to about 57 %. The training part of the preparation time was 87 % of the measured time for the senior physician and resident. The total workload for all involved personnel comprised 74.9 min of manpower for the first treatment, 39.7 min for a routine treatment with image guidance, and 22.8 min without image guidance. The mean room occupancy varied between 10.6 min (routine treatment without image guidance) and 23.7 min (first

  13. Information society studies

    CERN Document Server

    Duff, Alistair S

    2013-01-01

    We are often told that we are ""living in an information society"" or that we are ""information workers."" But what exactly do these claims mean, and how might they be verified? In this important methodological study, Alistair S. Duff cuts through the rhetoric to get to the bottom of the ""information society thesis."" Wide-ranging in coverage, this study will be of interest to scholars in information science, communication and media studies and social theory. It is a key text for the newly-unified specialism of information society studies, and an indispensable guide to the future of this disc

  14. Climate and Ancient Societies

    DEFF Research Database (Denmark)

    Climate, and human responses to it, have a strongly interconnected relationship. This when climate change occurs, the result of either natural or human causes, societies should react and adapt to these. But do they? If so, what is the nature of that change, and are the responses positive...... or negative for the long-term survival of social groups? In this volume, scholars from diverse disciplines including archaeology, geology and climate sciences explore scientific and material evidence for climate changes in the past, their causes, their effects on ancient societies and how those societies...

  15. The AERO system: a 3D-like approach for recording gene expression patterns in the whole mouse embryo.

    Directory of Open Access Journals (Sweden)

    Hirohito Shimizu

    Full Text Available We have recently constructed a web-based database of gene expression in the mouse whole embryo, EMBRYS (http://embrys.jp/embrys/html/MainMenu.html. To allow examination of gene expression patterns to the fullest extent possible, this database provides both photo images and annotation data. However, since embryos develop via an intricate process of morphogenesis, it would be of great value to track embryonic gene expression from a three dimensional perspective. In fact, several methods have been developed to achieve this goal, but highly laborious procedures and specific operational skills are generally required. We utilized a novel microscopic technique that enables the easy capture of rotational, 3D-like images of the whole embryo. In this method, a rotary head equipped with two mirrors that are designed to obtain an image tilted at 45 degrees to the microscope stage captures serial images at 2-degree intervals. By a simple operation, 180 images are automatically collected. These 2D images obtained at multiple angles are then used to reconstruct 3D-like images, termed AERO images. By means of this system, over 800 AERO images of 191 gene expression patterns were captured. These images can be easily rotated on the computer screen using the EMBRYS database so that researchers can view an entire embryo by a virtual viewing on a computer screen in an unbiased or non-predetermined manner. The advantages afforded by this approach make it especially useful for generating data viewed in public databases.

  16. Polypyrrole/silver coaxial nanowire aero-sponges for temperature-independent stress sensing and stress-triggered Joule heating.

    Science.gov (United States)

    He, Weina; Li, Guangyong; Zhang, Shangquan; Wei, Yong; Wang, Jin; Li, Qingwen; Zhang, Xuetong

    2015-04-28

    To obtain ideal sensing materials with nearly zero temperature coefficient resistance (TCR) for self-temperature-compensated pressure sensors, we proposed an Incipient Network Conformal Growth (INCG) technology to prepare hybrid and elastic porous materials: the nanoparticles (NPs) are first dispersed in solvent to form an incipient network, another component is then introduced to coat the incipient network conformally via wet chemical route. The conformal coatings not only endow NPs with high stability but also offer them additional structural elasticity, meeting requirements for future generations of portable, compressive and flexible devices. The resultant polypyrrole/silver coaxial nanowire hybrid aero-sponges prepared via INCG technology have been processed into a piezoresistive sensor with highly sensing stability (low TCR 0.86 × 10(-3)/°C), sensitivity (0.33 kPa(-1)), short response time (1 ms), minimum detectable pressure (4.93 Pa) after suffering repeated stimuli, temperature change and electric heating. Moreover, a stress-triggered Joule heater can be also fabricated mainly by the PPy-Ag NW hybrid aero-sponges with nearly zero temperature coefficient.

  17. Emerging and established global life-style risk factors for cancer of the upper aero-digestive tract.

    Science.gov (United States)

    Gupta, Bhawna; Johnson, Newell W

    2014-01-01

    Upper aero-digestive tract cancer is a multidimensional problem, international trends showing complex rises and falls in incidence and mortality across the globe, with variation across different cultural and socio-economic groups. This paper seeks some explanations and identifies some research and policy needs. The literature illustrates the multifactorial nature of carcinogenesis. At the cellular level, it is viewed as a multistep process involving multiple mutations and selection for cells with progressively increasing capacity for proliferation, survival, invasion, and metastasis. Established and emerging risk factors, in addition to changes in incidence and prevalence of cancers of the upper aero-digestive tract, were identified. Exposure to tobacco and alcohol, as well as diets inadequate in fresh fruits and vegetables, remain the major risk factors, with persistent infection by particular so-called "high risk" genotypes of human papillomavirus increasingly recognised as also playing an important role in a subset of cases, particularly for the oropharynx. Chronic trauma to oral mucosa from poor restorations and prostheses, in addition to poor oral hygiene with a consequent heavy microbial load in the mouth, are also emerging as significant risk factors. Understanding and quantifying the impact of individual risk factors for these cancers is vital for health decision-making, planning and prevention. National policies and programmes should be designed and implemented to control exposure to environmental risks, by legislation if necessary, and to raise awareness so that people are provided with the information and support they need to adopt healthy lifestyles.

  18. Effective L/D: A Theoretical Approach to the Measurement of Aero-Structural Efficiency in Aircraft Design

    Science.gov (United States)

    Guynn, Mark D.

    2015-01-01

    There are many trade-offs in aircraft design that ultimately impact the overall performance and characteristics of the final design. One well recognized and well understood trade-off is that of wing weight and aerodynamic efficiency. Higher aerodynamic efficiency can be obtained by increasing wing span, usually at the expense of higher wing weight. The proper balance of these two competing factors depends on the objectives of the design. For example, aerodynamic efficiency is preeminent for sailplanes and long slender wings result. Although the wing weight-drag trade is universally recognized, aerodynamic efficiency and structural efficiency are not usually considered in combination. This paper discusses the concept of "aero-structural efficiency," which combines weight and drag characteristics. A metric to quantify aero-structural efficiency, termed effective L/D, is then derived and tested with various scenarios. Effective L/D is found to be a practical and robust means to simultaneously characterize aerodynamic and structural efficiency in the context of aircraft design. The primary value of the effective L/D metric is as a means to better communicate the combined system level impacts of drag and structural weight.

  19. Surface integrity of GH4169 affected by cantilever finish grinding and the application in aero-engine blades

    Directory of Open Access Journals (Sweden)

    Li Xun

    2015-10-01

    Full Text Available GH4169 is the main material for aero-engine blades and integrated blisks. Because GH4169 has a poor milling performance, the profile precision and surface integrity of blades and integrated blisks are difficult to be met by utilizing the conventional milling process, which directly influence the global performance and reliability of aero-engines. Through grinding experiments on parameters and surface integrity optimization, the helical cantilever grinding process utilizing a 300# CBN RB wheel is presented and applied in finish machining of GH4169 blades. The profile errors of the blade surface are within ±0.01 mm, the roughness is less than 0.4 μm, the residual compressive stresses and the hardening rate are appropriate, there are no phenomena of burr and smearing with the grinding chips, and the leading/trailing edge can be smoothly connected with the suction/pressure surface. All the experimental results indicate that this grinding process is greatly suitable for the profile finish machining of GH4169 blades.

  20. Nonlinear Dynamic Modeling of a Supersonic Commercial Transport Turbo-Machinery Propulsion System for Aero-Propulso-Servo-Elasticity Research

    Science.gov (United States)

    Connolly, Joe; Carlson, Jan-Renee; Kopasakis, George; Woolwine, Kyle

    2015-01-01

    This paper covers the development of an integrated nonlinear dynamic model for a variable cycle turbofan engine, supersonic inlet, and convergent-divergent nozzle that can be integrated with an aeroelastic vehicle model to create an overall Aero-Propulso-Servo-Elastic (APSE) modeling tool. The primary focus of this study is to provide a means to capture relevant thrust dynamics of a full supersonic propulsion system by using relatively simple quasi-one dimensional computational fluid dynamics (CFD) methods that will allow for accurate control algorithm development and capture the key aspects of the thrust to feed into an APSE model. Previously, propulsion system component models have been developed and are used for this study of the fully integrated propulsion system. An overview of the methodology is presented for the modeling of each propulsion component, with a focus on its associated coupling for the overall model. To conduct APSE studies the described dynamic propulsion system model is integrated into a high fidelity CFD model of the full vehicle capable of conducting aero-elastic studies. Dynamic thrust analysis for the quasi-one dimensional dynamic propulsion system model is presented along with an initial three dimensional flow field model of the engine integrated into a supersonic commercial transport.

  1. N3S-AERO: a multidimensional model for numerical simulation of all wet cooling tower systems

    International Nuclear Information System (INIS)

    Razafindrakoto, E.; Hofmann, F.

    1997-01-01

    3D model is more required to optimize the design of new cooling tower by way of parameters studies, to improve the performance of the existing ones from changes in fill zone or water distribution. Therefore, the Directions des Etudes et Recherches with collaboration of the Direction de l'Equipement of EDF, has developed a specific version of the finite element CFD code N3S, denoted N3S-AERO, for the simulation of natural or mechanical draught wet cooling towers. It solves mass, momentum, heat and humidity averaged Navier-Stokes equations including buoyancy terms with variable density for air flow in the whole domain mass, heat equations for water flow in exchange zones. With standard results of N3S as air velocity and scalar fields, N3S-AERO gives in return water temperature fields mean values of variables at inlet or outlet of each exchange zone and thermal performance of the tower. 2D axisymmetrical and 3D industrial cases have soon been done. Major flow phenomena are well predicted and averaged cold water values are in good agreement with ID-TEFERI code or measurements

  2. Society for Ambulatory Anesthesia

    Science.gov (United States)

    ... SAMBA Link Digital Newsletter Educational Bibliography Research IARS/Anesthesia & Analgesia SCOR About SCOR Sponsor SAMBA Meetings Affinity Sponsor Program We Represent Ambulatory and Office-Based Anesthesia The Society for Ambulatory Anesthesia provides educational opportunities, ...

  3. American Epilepsy Society

    Science.gov (United States)

    ... for the AES Annual Meeting. More info here . Epilepsy Currents American Epilepsy Society Journal Impact Factor More ... P450 enzyme overexpression during spontaneous recurrent seizures More Epilepsy Professional News AES Status Epilepticus guideline for treatment ...

  4. Pediatric Endocrinology Nurses Society

    Science.gov (United States)

    ... Join Now International Welcome to PENS The Pediatric Endocrinology Nursing Society (PENS) is committed to the development ... nurses in the art and science of pediatric endocrinology nursing. Learn More Text1 2018 PENS Call for ...

  5. American Geriatrics Society

    Science.gov (United States)

    ... Learn More Social Media Facebook Twitter LinkedIn Instagram Social Media Bar Right Menu Annual Meeting Donate to our Foundation Contact Us American Geriatrics Society 40 Fulton St., 18th Floor New York, NY ...

  6. Society of Interventional Radiology

    Science.gov (United States)

    ... Picture yourself in L.A. Register now SIR Essentials Purchase/register Search SIR's entire catalog for educational ... Quality Improvement Clinical practice MACRA Matters Health Policy, Economics, Coding Toolkits Society of Interventional Radiology 3975 Fair ...

  7. Society of Thoracic Surgeons

    Science.gov (United States)

    ... Apply for Membership Membership Directory Pay Your Dues Industry Mailing List License & eBlast Communications Programs Advertise on ... Hotel Discount Copyright © 2017 The Society of Thoracic Surgeons. ...

  8. Valie EXPORT Society. Overlok

    Index Scriptorium Estoniae

    2001-01-01

    Valie EXPORT Society asutasid 23. okt. 1999. a. Frankfurdis Kadi Estland, Killu Sukmit ja Mari Laanemets, kui olid külastanud austria naiskunstniku Valie Exporti näitust. Rühmituse aktsioonide kirjeldus

  9. Valie EXPORT Society Rooseumis

    Index Scriptorium Estoniae

    2002-01-01

    Malmös Rooseumi Kaasaegse Kunsti Keskuses näitus "Baltic Babel". Projekt koosneb Läänemeremaade linnades tegutsevate innovatiivsete gruppide aktsioonidest. Kuraator Charles Esche. Esinejatest (Eestist Valie Export Society: Kadi Estland, Killu Sukmit)

  10. Rare earth oxide aero- and xerogels. Tuning porosity and catalytic properties

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, Bjoern

    2013-11-15

    , katalytisch vielversprechende Seltenerdoxide im Hinblick auf Porositaet und Zusammensetzung so zu veraendern, dass sie fuer Oxidationsreaktionen und die oxidative Kupplung von Methan gute Ergebnisse aufweisen. Dabei lag einerseits ein grosser Schwerpunkt auf Sol-gel-chemischen Methoden und hier besonders auf der sog. ''Epoxide Addition Method''. Neben Aero- und Xerogelen der reinen Seltenerdoxide wurden auch Hybridsysteme aus den Seltenerdoxiden und Aluminiumoxid praepariert, umfangreich charakterisiert und katalytisch getestet. Des Weiteren wurden duenne Xerogel Filme und makroporoese Monolithe, letztere mittels einer direkten Schaeumungsmethode, hergestellt. Die Ergebnisse der Arbeit belegen das grosse Potential v.a. der Sol-Gel-Chemie, poroese Materialien mit variabler und kontrollierbarer Porositaet und Zusammensetzung fuer die heterogene Katalyse verfuegbar zu machen und dabei leistungsfaehigere Katalysatoren zu erhalten.

  11. Investigation of global particulate nitrate from the AeroCom phase III experiment

    Directory of Open Access Journals (Sweden)

    H. Bian

    2017-11-01

    Full Text Available An assessment of global particulate nitrate and ammonium aerosol based on simulations from nine models participating in the Aerosol Comparisons between Observations and Models (AeroCom phase III study is presented. A budget analysis was conducted to understand the typical magnitude, distribution, and diversity of the aerosols and their precursors among the models. To gain confidence regarding model performance, the model results were evaluated with various observations globally, including ground station measurements over North America, Europe, and east Asia for tracer concentrations and dry and wet depositions, as well as with aircraft measurements in the Northern Hemisphere mid-to-high latitudes for tracer vertical distributions. Given the unique chemical and physical features of the nitrate occurrence, we further investigated the similarity and differentiation among the models by examining (1 the pH-dependent NH3 wet deposition; (2 the nitrate formation via heterogeneous chemistry on the surface of dust and sea salt particles or thermodynamic equilibrium calculation including dust and sea salt ions; and (3 the nitrate coarse-mode fraction (i.e., coarse/total. It is found that HNO3, which is simulated explicitly based on full O3-HOx-NOx-aerosol chemistry by all models, differs by up to a factor of 9 among the models in its global tropospheric burden. This partially contributes to a large difference in NO3−, whose atmospheric burden differs by up to a factor of 13. The atmospheric burdens of NH3 and NH4+ differ by 17 and 4, respectively. Analyses at the process level show that the large diversity in atmospheric burdens of NO3−, NH3, and NH4+ is also related to deposition processes. Wet deposition seems to be the dominant process in determining the diversity in NH3 and NH4+ lifetimes. It is critical to correctly account for contributions of heterogeneous chemical production of nitrate on dust and sea salt, because this process

  12. The Society for Scandinavian Art

    DEFF Research Database (Denmark)

    Grand, Karina Lykke

    2016-01-01

    The Society for Nordic Art & the Scandinavian Society [Selskabet for Nordisk Kunst & Skandinavisk Selskab]......The Society for Nordic Art & the Scandinavian Society [Selskabet for Nordisk Kunst & Skandinavisk Selskab]...

  13. Nuclear technology and society

    International Nuclear Information System (INIS)

    Suzuki, Tatsujiro; Tanaka, Yutaka; Taniguchi, Taketoshi; Oyama, Kosuke

    1999-01-01

    This special issue of Journal of the Atomic Energy Society of Japan deals with the relation between nuclear technology and society, and is composed of four papers: (1) Nuclear energy and international politics - sociotechnics around plutonium utilization; (2) Risk recognition and benefit recognition of nuclear facilities and social acceptance; (3) Environmental risk management and radioactive waste problem; and, (4) Public administration around the relation between nuclear energy and society. (1) describes the historical development of nuclear energy since its birth, focusing on how the leading countries tried to control nuclear proliferation. Peaceful utilization of nuclear energy is closely connected with the Non-proliferation problem. (1) also discusses the relation of plutonium utilization of Japan with international society. (2) discusses how nuclear facilities can be accepted by society, analyzing the background of risk recognition, in particular, of psychological character of mass society. (3) introduces an new approach (risk-based or risk-informed regulation) of environmental risk management for radioactive waste disposal problem, focusing on HLW (high-level waste). (4) explains the approach from public administration to nuclear energy and general energy policy and introduces PPA (participatory policy analysis) as a means for policy making. (M.M.)

  14. APPLICATION OF ROUGH SET THEORY TO MAINTENANCE LEVEL DECISION-MAKING FOR AERO-ENGINE MODULES BASED ON INCREMENTAL KNOWLEDGE LEARNING

    Institute of Scientific and Technical Information of China (English)

    陆晓华; 左洪福; 蔡景

    2013-01-01

    The maintenance of an aero-engine usually includes three levels ,and the maintenance cost and period greatly differ depending on the different maintenance levels .To plan a reasonable maintenance budget program , airlines would like to predict the maintenance level of aero-engine before repairing in terms of performance parame-ters ,which can provide more economic benefits .The maintenance level decision rules are mined using the histori-cal maintenance data of a civil aero-engine based on the rough set theory ,and a variety of possible models of upda-ting rules produced by newly increased maintenance cases added to the historical maintenance case database are in-vestigated by the means of incremental machine learning .The continuously updated rules can provide reasonable guidance suggestions for engineers and decision support for planning a maintenance budget program before repai-ring .The results of an example show that the decision rules become more typical and robust ,and they are more accurate to predict the maintenance level of an aero-engine module as the maintenance data increase ,which illus-trates the feasibility of the represented method .

  15. On the aero-elastic design of the DTU 10MW wind turbine blade for the LIFES50+ wind tunnel scale model

    DEFF Research Database (Denmark)

    Bayati, I.; Belloli, M.; Bernini, L.

    2016-01-01

    and for different angles of attack. The aero-elastic design algorithm was set to define the optimal spanwise thickness over chord ratio (t/c), the chord length and the twist to match the first flapwise scaled natural frequency. An aluminium mould for the carbon fibre was CNC manufactured based on B-Splines CAD...

  16. Civil society sphericules

    DEFF Research Database (Denmark)

    Tufte, Thomas

    2014-01-01

    the organization strategizes about and seeks to articulate amongst Tanzanian youth. Situated in the ‘perverse confluence’ (Dagnino, 2011) between neoliberal and radical democratic agendas in the communicative practices of civil society-driven media platforms, Femina navigates between identities as an NGO, a social...... movement and a media initiative. In the context of the growing literature on social networking sites and their affordances, dynamics and structures, the case of Femina illustrates how a civil society sphericule emerges within the dynamic co-evolution of new and old media platforms. The study is furthermore...... an example of the difficult shift in civil society practice, from service provision to an agenda of public service monitoring, social accountability and community engagement....

  17. Society and education

    DEFF Research Database (Denmark)

    Moutsios, Stavros

    in Europe. Elaborating on the Castoriadian ontology, the book delves into the magma of social imaginary significations that characterise and associate pivotal epochs of the continent’s history, Classical Greece and Modernity, and exemplifies their incarnation in educational systems and in the formation...... countries. Nevertheless, as Moutsios suggests, the European tradition, notwithstanding its ideological usage by much of social sciences, contains an indissoluble critical and self-reflective dimension, which needs to be sustained and advanced in education and its cross-cultural comparison, perhaps, more......'Society and Education: An Outline of Comparison' explores the relation of society to education in Europe, as well as its comparative perspective towards overseas societies and their institutions. It is an enquiry into the social-historical institution of education and cross-cultural studies...

  18. Producing Civil Society

    DEFF Research Database (Denmark)

    Feldt, Liv Egholm; Hein Jessen, Mathias

    Since the beginning of the 1990’s, civil society has attracted both scholarly and political interest as the ‘third sphere’ outside the state and the market not only a normatively privileged site of communication and ‘the public sphere’, but also as a resource for democratization processes...... and social cohesion, as well as a provider of welfare services from a welfare state in dire straits. However, such a view upholds a sharp distinction between the three sectors and their distinct logic. This article claims that the separation of spheres is a fundamental part of our ‘social imaginary......’ and as such dominates our way of thinking about civil society. Yet, this view hinders the understanding of how civil society is not a pre-existing or given sphere, but a sphere which is constantly produced both discursively, conceptually and practically. Through two examples; 1,the case of philanthropy in the beginning...

  19. Investigative report, science committee of Aggregate corporation Radiological technologist society of the Oita prefecture. Questionnaires research on security control of department of radiological technology of medical facilities in the Oita prefecture. The second report. Research on high risk incident measures

    International Nuclear Information System (INIS)

    Eto, Yoshihiro; Mano, Isao; Takagi, Ikuya; Murakami, Yasunori; Sueyoshi, Seiji; Yoshimoto, Asahi

    2007-01-01

    Oita association of radiological technologists carried out the questionnaires about the measures against high lisk incidental in department of radiological technology at the medical facilities in Oita. We distributed the questionnaire to 102 facilities, which are worked by the technologists (member), and got response from 91 facilities (89%). Research contents are Patient verification method'' ''Input and verification of patient attribute'' ''Infection in hospital'' ''Stumbles and falls of patient'' Contrast enhancement CT'' ''Something related to pacemaker'' ''MRI inspection and the magnetic substance'' ''Remedy mistake'' and ''Risk management''. The Result, Low level recognition contents of medical accident measures are ''Contrast enhancement CT'' ''Stumbles and falls of patient'' Risk management of department of radiological technology''. (author)

  20. Science and Society Colloquium

    CERN Multimedia

    Randi, J

    1991-01-01

    Mr. Randi will give an update of his lecture to the American Physical Society on the occasion of his award of the 1989 Forum Prize. The citation said: "for his unique defense of Science and the scientific method in many disciplines, including physics, against pseudoscience, frauds and charlatans. His use of scientific techniques has contributed to refuting suspicious and fraudulent claims of paranormal results. He has contributed significantly to public understanding of important issues where science and society interact". He is a professional magician and author of many books. He worked with John Maddox, the Editor of Nature to investigate the claims of "water with memory".

  1. Advanced information society(7)

    Science.gov (United States)

    Chiba, Toshihiro

    Various threats are hiding in advanced informationalized society. As we see car accident problems in motorization society light aspects necessarily accompy shady ones. Under the changing circumstances of advanced informationalization added values of information has become much higher. It causes computer crime, hacker, computer virus to come to the surface. In addition it can be said that infringement of intellectual property and privacy are threats brought by advanced information. Against these threats legal, institutional and insurance measures have been progressed, and newly security industry has been established. However, they are not adequate individually or totally. The future vision should be clarified, and countermeasures according to the visions have to be considered.

  2. Host model uncertainties in aerosol radiative forcing estimates: results from the AeroCom Prescribed intercomparison study

    Directory of Open Access Journals (Sweden)

    P. Stier

    2013-03-01

    Full Text Available Simulated multi-model "diversity" in aerosol direct radiative forcing estimates is often perceived as a measure of aerosol uncertainty. However, current models used for aerosol radiative forcing calculations vary considerably in model components relevant for forcing calculations and the associated "host-model uncertainties" are generally convoluted with the actual aerosol uncertainty. In this AeroCom Prescribed intercomparison study we systematically isolate and quantify host model uncertainties on aerosol forcing experiments through prescription of identical aerosol radiative properties in twelve participating models. Even with prescribed aerosol radiative properties, simulated clear-sky and all-sky aerosol radiative forcings show significant diversity. For a purely scattering case with globally constant optical depth of 0.2, the global-mean all-sky top-of-atmosphere radiative forcing is −4.47 Wm−2 and the inter-model standard deviation is 0.55 Wm−2, corresponding to a relative standard deviation of 12%. For a case with partially absorbing aerosol with an aerosol optical depth of 0.2 and single scattering albedo of 0.8, the forcing changes to 1.04 Wm−2, and the standard deviation increases to 1.01 W−2, corresponding to a significant relative standard deviation of 97%. However, the top-of-atmosphere forcing variability owing to absorption (subtracting the scattering case from the case with scattering and absorption is low, with absolute (relative standard deviations of 0.45 Wm−2 (8% clear-sky and 0.62 Wm−2 (11% all-sky. Scaling the forcing standard deviation for a purely scattering case to match the sulfate radiative forcing in the AeroCom Direct Effect experiment demonstrates that host model uncertainties could explain about 36% of the overall sulfate forcing diversity of 0.11 Wm−2 in the AeroCom Direct Radiative Effect experiment. Host model errors in aerosol radiative forcing are largest in regions of uncertain host model

  3. 3D quantitative interpretation of archaeo-magnetic data: Adaptation of aero-magnetic interpretation techniques for archaeological purposes

    Science.gov (United States)

    Cheyney, S.; Hill, I. A.; Linford, N.; Fishwick, S.; Leech, C.

    2011-12-01

    High-resolution total-field magnetic data can be collected rapidly and relatively cheaply over large archaeological sites due to recent advances in data collection. However, interpretation of these datasets still generally comprises a sequence of data correction and filtering operations prior to a 2D visual interpretation based on pattern recognition. In contrast, current developments in aero-magnetic interpretation have led to several tools for identifying location, shape and depth information of anomalous sources. These methods often fail when directly applied to archaeo-magnetic data, due to the particular noise content typical in very near-surface surveys. Here techniques are explored that allow these aero-magnetic interpretation tools to be applied to archaeological problems, without the need for extensive, often biased user input. It is shown that full 3D quantitative interpretation of the subsurface is possible from just the magnetic data alone. Inversion of magnetic data is increasingly being applied to aero-magnetic surveys to produce 3D models of the subsurface magnetisation. Typically, an objective function is minimised in order to create a smooth distribution of magnetisation away from a reference model (or halfspace if no a-priori information is available). Often, although a good fit to the observed values may be obtained, the final model will be non-unique and biased by the reference model. Testing of synthetic data shows that when archaeo-magnetic datasets are inverted without applying a-priori information, large discrepancies between the true and modelled depths can occur. Where no a-priori information is available, information regarding the horizontal location of sources can be obtained from derivative-based methods such as the absolute horizontal gradient, tilt-angle and theta-map. Using pseudogravity data with these techniques, overcomes the problem of noise amplification that has previously hampered archaeological uses of these techniques. Depth

  4. Aero-Propulsive Model Design from a Commercial Aircraft in Climb and Cruise Regime using Performance Data =

    Science.gov (United States)

    Tudor, Magdalena

    IATA has estimated, in 2012, at about 2% of global carbon dioxide emissions, the environmental impact of the air transport, as a consequence caused by the rapidly growing of global movement demand of people and goods, and which was effectively taken into account in the development of the aviation industry. The historic achievements of scientific and technical progress in the field of commercial aviation were contributed to this estimate, and even today the research continues to make progress to help to reduce the emissions of greenhouse gases. Advances in commercial aircraft, and its engine design technology had the aim to improve flight performance. These improvements have enhanced the global flight planning of these types of aircrafts. Almost all of these advances rely on generated performance data as reference sources, the most of which are classified as "confidential" by the aircraft manufacturers. There are very few aero-propulsive models conceived for the climb regime in the literature, but none of them was designed without access to an engine database, and/or to performance data in climb and in cruise regimes with direct applicability for flight optimization. In this thesis, aero-propulsive models methodologies are proposed for climb and cruise regimes, using system identification and validation methods, through which airplane performance can be computed and stored in the most compact and easily accessible format for this kind of performance data. The acquiring of performance data in this format makes it possible to optimize flight profiles, used by on-board Flight Management Systems. The aero-propulsive models developed here were investigated on two aircrafts belonging to commercial class, and both of them had offered very good accuracy. One of their advantages is that they can be adapted to any other aircraft of the same class, even if there is no access to their corresponding engine flight data. In addition, these models could save airlines a considerable

  5. Rationality in Society

    NARCIS (Netherlands)

    Flache, Andreas; Dijkstra, Jacob; Wright, James D.

    2015-01-01

    Contemporary theories of rational behavior in human society augment the orthodox model of rationality both by adding various forms of bounded rationality and relaxing the assumptions of self-interest and materialistic preferences. This entry discusses how these extensions of the theory of rational

  6. The Mediated Transparent Society

    DEFF Research Database (Denmark)

    Backer, Lise

    2001-01-01

    in the mediated transparent society. The paper concludes that, based on these analyses, the mediated panopticism working on the business segment is not an effective disciplinary apparatus, which can guarantee that business corporations are carrying out important ecological or ethical improvements....

  7. Leukemia & Lymphoma Society

    Science.gov (United States)

    ... be the exclusive property of The Leukemia & Lymphoma Society which in its sole discretion may use this material as it sees fit. I agree to the terms of the Standard Photography Release.* Submit * This field is required * Please fix the validation error messages in the Form Your story was ...

  8. MARX EMBRYOLOGY OF SOCIETY

    NARCIS (Netherlands)

    WOUTERS, A

    This article presents a new interpretation of Marx's dialectical method. Marx conceived dialectics as a method for constructing a model of society. The way this model is developed is analogous to the way organisms develop according to the German embryologist Karl Ernst von Baer, and, indeed, Marx's

  9. Exploratory of society

    Science.gov (United States)

    Cederman, L.-E.; Conte, R.; Helbing, D.; Nowak, A.; Schweitzer, F.; Vespignani, A.

    2012-11-01

    A huge flow of quantitative social, demographic and behavioral data is becoming available that traces the activities and interactions of individuals, social patterns, transportation infrastructures and travel fluxes. This has caused, together with innovative computational techniques and methods for modeling social actions in hybrid (natural and artificial) societies, a qualitative change in the ways we model socio-technical systems. For the first time, society can be studied in a comprehensive fashion that addresses social and behavioral complexity. In other words we are in the position to envision the development of large data and computational cyber infrastructure defining an exploratory of society that provides quantitative anticipatory, explanatory and scenario analysis capabilities ranging from emerging infectious disease to conflict and crime surges. The goal of the exploratory of society is to provide the basic infrastructure embedding the framework of tools and knowledge needed for the design of forecast/anticipatory/crisis management approaches to socio technical systems, supporting future decision making procedures by accelerating the scientific cycle that goes from data generation to predictions.

  10. Italian Society of Physics

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    The abstracts of most of the papers read at the 53 National Congress of the Italian Society of Physics are presented. The Congress developed in ten sessions: high energy and elementary particle physics, physics of nuclei, condensed matter, quantum electronics, cosmic physics, geophysics, general physics, electronics and applied physics, health physics and hystory of physics. An author index is also included

  11. The Duplex Society.

    Science.gov (United States)

    Schorr, Alvin L.

    1984-01-01

    The duplex society, in which the poor live in close proximity to others but in a separate compartment, is already with us. Unless something deeply changes about family income, more than one-third of future generations will come to adulthood having spent a portion of their childhood in official poverty. (RM)

  12. Afghanistan, state and society

    DEFF Research Database (Denmark)

    Kværnø, Ole

    In June 2007, the RAND Corporation and the Royal Danish Defence College hosted a conference titled “Afghanistan: State and Society, Great Power Politics, and the Way Ahead”. The two-day event, held in Copenhagen, was attended by more than 100 politicians, scholars, academics, and representative...

  13. Radiation protection and society

    International Nuclear Information System (INIS)

    Skryabin, A.M.

    1997-01-01

    The radiological protection of population, living on the contaminated territories, is actual 10 years after the Chernobyl accident. Eventually, the whole system of countermeasures application is aimed to protect society as a complex community of individuals . The variety of levels of society, i.e. family, settlement on the whole, can be considered as certain harmonic systems differing in their public consciousness levels and lifestyles, this explain the difference in their 'behaviour' in terms of radiation protection and attitude to the information obtained. Each level of society possesses a certain degree of liberty of choice, that finally influence the magnitude and the character of dose distribution within certain population groups. In general, the dose distribution in the settlement can be explained only on the bases of 'family' analysis. This concerns the rural settlement as a society too. All rural settlement can be divided into two or three classes: with low, high and intermediate social features. Small settlements (< 100 persons), where the advanced in age persons with low material income and high degree of natural economy are applied to the first class. This results in higher doses (2-3 fold), than in the settlements with higher social level. The analysis shows that in socially 'waning' settlements the countermeasures are less efficient and the term of their action is shorter. (this class is the largest, About 50% among all the rural settlements). Due to the deterioration of the economic situation in the Republic of Belarus after 1991-1992 resulted in the increase of doses mainly in the habitants first of all of this class of settlements. It seems problematic to increase countermeasures efficiency in this class of settlements without the refuse of the accustomed lifestyle and radical improvement of social-demographic and economic conditions. The present material shows the necessity of the differential approach based on 'society-analysis' in the

  14. Consumption in the Information Society

    Science.gov (United States)

    Zherebin, V. M.; Ermakova, N. A.; Makhrova, O. N.

    2010-01-01

    The current state of the economy in the developed countries make it possible to characterize them using concepts and terms such as the postindustrial society, the new economy, the service economy, the creative economy, the posteconomic society, the information society, the knowledge society, and the consumer society. Among these terms and…

  15. HAWC2 and BeamDyn: Comparison Between Beam Structural Models for Aero-Servo-Elastic Frameworks: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Pavese, Christian; Kim, Taeseong; Wang, Qi; Jonkman, Jason; Sprague, Michael A.

    2016-08-01

    This work presents a comparison of two beam codes for aero-servo-elastic frameworks: a new structural model for the aeroelastic code HAWC2 and a new nonlinear beam model, BeamDyn, for the aeroelastic modularization framework FAST v8. The main goal is to establish the suitability of the two approaches to model the structural behaviour of modern wind turbine blades in operation. Through a series of benchmarking structural cases of increasing complexity, the capability of the two codes to simulate highly nonlinear effects is investigated and analyzed. Results show that even though the geometrically exact beam theory can better model effects such as very large deflections, rotations, and structural couplings, an approach based on a multi-body formulation assembled through linear elements is capable of computing accurate solutions for typical nonlinear beam theory benchmarking cases.

  16. Initial comments on the aero geophysical information present at the B and C areas of the Itatira (Brazil) project

    International Nuclear Information System (INIS)

    Castro, Neivaldo Araujo de; Castelo Branco, Raimundo Mariano Gomes

    1999-01-01

    The aero geophysical project called Itatira,, accomplished by LASA Engenharia e Prospeccoes S.A., Between September and November/1977 through contract with NUCLEBRAS, corresponds to one of the first project of this gender accomplished in national territory. In this project were flight more than 80 000 km of linear lines, which covered approximately 38 000 km 2 on the precambrian terrains of the Ceara State, NE Brazil. For several reasons, the total area of the project was subdivided in three sub-areas (A, B and C), each one covered by a different airship (LAS, 1977). This paper presents the geophysical information and preliminary interpretations of the areas B and C that were obtained through the integrated use of the soft wares AUTOCAD r. 14, OASIS MONTAJ r.4.2 and ERMAPPER r.5.5. (author)

  17. Nuclear energy and society

    International Nuclear Information System (INIS)

    Sobajima, Makoto; Shimooka, Hiroshi; Tanaka, Yasumasa; Fujii, Yasuhiko; Misima, Tsuyoshi

    2004-01-01

    Nuclear energy has a strong relation to a society. However, due to accidents and scandals having occurred in recent years, people's reliability to nuclear energy has significantly swayed and is becoming existence of a worry. Analyzing such a situation and grasping the problem contained are serious problems for people engaging in nuclear field. In order that nuclear energy is properly used in society, communication with general public and in nuclear power plant site area are increasingly getting important as well as grasping the situation and surveying measures for overcoming the problems. On the basis of such an analysis, various activities for betterment of public acceptance of nuclear energy by nuclear industry workers, researchers and the government are proposed. (J.P.N.)

  18. Branding Cities, Changing Societies

    DEFF Research Database (Denmark)

    Ooi, Can-Seng

    Societal changes are seldom discussed in the literature on city branding. The time element is important because it highlights the fluctuating reality of society. The city brand message freezes the place but in fact, the city branding exercise is a continuous process. Society emerges too. City...... brands are supposed to accentuate the uniqueness of the city, be built from the bottom-up and reflect the city's identity. This paper highlights three paradoxes, pointing out that city branding processes can also make cities more alike, bring about societal changes and forge new city identities. A city...... branding campaign does not just present the city, it may change the city. The relationships between the branding exercise and the city are intertwined in the evolution of the place....

  19. Society and Social Power

    Directory of Open Access Journals (Sweden)

    Janani Harish

    2014-10-01

    Full Text Available Society is the source of immense power. Over the past few centuries humanity has record­ed phenomenal growth in its collective capacity for accomplishment, as reflected in the 12-fold growth in global per capita income since 1800. The remarkable achievements in living standards, longevity, science, technology, industry, education, democracy, human rights, peace and global governance are the result of the exponential development of the capacity of society to harness human energies and convert them into social power for productive purposes. Today, humanity possesses the power and capabilities needed to fully meet the multi-dimensional challenges confronting global society. The source of this energy is people. Human energy is transformed into social power by the increasing reach, frequency and complexity of human relationships. Society is a complex living network of organized relationships between people. Its power issues from channelizing our collective energies in productive ways by means of organizing principles such as coordination, systems, specialization of function, hierarchy of authority, and integration. This immense social power remains largely underutilized. Social science needs to evolve a comprehensive, trans-disciplinary understanding of the roots of social power and the process by which it is generated, distributed and applied. This knowledge is the essential foundation for formulating effective social policies capable of eradicating forever persistent poverty, unemployment and social inequality. This article is based on a series of lectures delivered by the author in the WAAS-WUC course on “Toward a Trans-disciplinary Science of Society” at Dubrovnik on September 1-3, 2014. It traces the development of social power in different fields to show that human and social capital are inexhaustible in potential. The more we harness them, the more they grow. Unleashing, directing, channeling and converting human potential into social

  20. Quality and human society

    Science.gov (United States)

    Stoll, W.

    1991-02-01

    Quality of products and services is seen as a necessity in our modern world. Quality also has important cross-links to safety in our society. It is however suggested, that human beings are living in their industrial environment under the stress of a fractured personality with anxieties and frustrations. Some cultural comparisons with other industrial nations are given. Quality control tailored to human nature is recommended.

  1. Cooking and Society

    OpenAIRE

    Teplá, Hedvika

    2012-01-01

    The bachelor thesis "Cooking and Society" focuses on cooking, a process of food preparation. The thesis analyzes cooking as a leisure activity, type of housework and it also discusses the relation between cooking and cultural identity. It focuses on the importance of national and ethnic cuisine and deals with the differences in cooking influenced by religion and social stratification. The thesis also deals with the acquisition of cooing skills and transgeneral transfer of cooking skills. It d...

  2. Man in Society

    Institute of Scientific and Technical Information of China (English)

    单祝堂

    1994-01-01

    Men usually want to have their own way.They want to thinkand act as they like.No one,however,can have his own way all thetime.A man cannot live in society without considering the interestsof others as well as his own interests.’Society’ means a groupof people with the same laws and the same way of life.People in

  3. The new totalitarian society

    OpenAIRE

    Vlajki Emil

    2011-01-01

    The new totalitarian society is a euphemized expression denoting the New World Order, which in itself denotes the American globalization. The underpinning of this mindset is rationality, which is characteristic of Western civilization. Christianity engendered rationality by introducing it through St. Thomas Aquinas, Aristotle, and especially formal logic. Since it is obvious that religion and logic cannot ultimately be harmonized, this combination has proven lethal in many cases throughout hi...

  4. Creativity In Conscience Society

    OpenAIRE

    Ion Gh. Rosca; Dumitru Todoroi

    2011-01-01

    Creativity is a result of brain activity which differentiates individuals and could ensure an important competitive advantage for persons, for companies, and for Society in general. Very innovative branches – like software industry, computer industry, car industry – consider creativity as the key of business success. Natural Intelligence Creativity can develop basic creative activities, but Artificial Intelligence Creativity, and, especially, Conscience Intelligence Creativity should be devel...

  5. Radiation Sensitivity of Societies

    International Nuclear Information System (INIS)

    Uray, I.; Hille, R.; Rohloff, F.

    1998-01-01

    Investigating the mean dose values as well as dose distributions of the inhabitants in a large number of settlements maybe set down, that the generally calculated mean exposure is a good measure to estimate the collective dose for a settlement or for a large region. Its uncertainty is however too high, and the dose distribution is very broad (250-300%) to estimate the external exposure of any single person. However, models may take into account more details of influencing factors. First of all the surveying of the local contamination density distribution could be more detailed and more accurate. Measure and distribution of the internal exposure (is not the subject of the present work, but it is similarly problematic. In this situation it is very difficult to search the dose-effect relationships exactly, and is also difficult to satisfy the people that their fears are unjustified. Society pays the costs of the nuclear industry and of the possible consequences as well. But society can neither control the nuclear industry nor the possible consequences at all. Both science and single people are waiting for more and detailed information. If we can not decrease the r adiation sensitivity of societies , then the consequences of Chernobyl will be growing unnecessarily, and it can strongly retard the justified development of the nuclear industry as well. (author)

  6. The new totalitarian society

    Directory of Open Access Journals (Sweden)

    Vlajki Emil

    2011-01-01

    Full Text Available The new totalitarian society is a euphemized expression denoting the New World Order, which in itself denotes the American globalization. The underpinning of this mindset is rationality, which is characteristic of Western civilization. Christianity engendered rationality by introducing it through St. Thomas Aquinas, Aristotle, and especially formal logic. Since it is obvious that religion and logic cannot ultimately be harmonized, this combination has proven lethal in many cases throughout history. For instance, the Inquisition, which, contrary to what happened at scholastic universities, severely berated rational thinking in practice. Catholicism helped carry out genocide against the Jews, and Orthodoxy is in a certain manner tied in with Stalinism. The new totalitarian society is anchored in American Protestantism. On the whole, Christian rationalism is a sphere of science, techniques and technologies efficiently employed to promote the West to the status of a society of plenty and the conception of human rights, which turn into their opposite and irrational behavior of the worst kind. An example of such inhumanity is the attack against Yugoslavia/Serbia in 1999.

  7. Science, Society and Policy

    Science.gov (United States)

    White, K. S.; Teich, A. H.

    2010-12-01

    Apart from the journals they produce, scientific societies play an important role in communicating scientific findings and norms to the broader society. The American Association for the Advancement of Science (AAAS) includes among its goals to promote and defend the integrity of science and its use; provide a voice for science on societal issues; promote the responsible use of science in public policy; and increase public engagement with science and technology. AAAS websites and programs, including Communicating Science (www.aaas.org/communicatingscience), Working with Congress (http://www.aaas.org/spp/cstc/wwc/book.htm) and ScienceCareers.org (http://sciencecareers.sciencemag.org), provide tools for scientists to become more directly engaged in effectively communicating their findings and involved in the policy process. Education programs work to build the next generation of scientists and a science-literate public. To bridge the current communication gap between scientists, the public and policymakers, AAAS, like other scientific societies, maintains policy and outreach programs with limited budgets and staff. AAAS works to engage policymakers and provide scientific underpinning to key issues through congressional briefings, meetings, policy briefs, and media outreach. AAAS responds to challenges to accepted scientific findings and processes through op-eds, letters to government officials, resolutions, and Board statements. Some of these initiatives occur on a local level in partnership with local civic leaders, whose endorsement makes them more powerful. On a national scale, they assure that the voice of science is included in the debate. The changing media landscape presents opportunities and challenges for future AAAS endeavors.

  8. Membership in cooperative societies

    Directory of Open Access Journals (Sweden)

    Eba Gaminde Egia

    2017-12-01

    Full Text Available In this work we will analyze the practical application of one of the cooperative principles, «voluntary and free membership», referring to the entering of members in cooperative societies. We will first explain the meaning of this principle, and then bring up its normative regulation, with special emphasis on those aspects in which our autonomic laws differ, and ending with a brief reference to the economic aspect and the different ways to make contributions and their consequences.Received: 31 May 2017Accepted: 14 October 2017Published online: 22 December 2017

  9. The post Chernobyl society

    International Nuclear Information System (INIS)

    Xenofontov, Ion.

    2011-01-01

    The disaster from the nuclear power plant in Chernobyl that took place on April 26, 1986 is considered to be the worst ecologic disaster in Europe during the entire nuclear power producing history (estimated on the highest level, the seventh). The disaster had an poisonous impact on people's health and ambitions, it also gave birth to a new vision on the impact of the human factor on the universe. The post Chernobyl society is an alarming sign as regarding the human surviving perspectives, and a violent lesson on the 'global biography'. (author)

  10. Advanced information society (9)

    Science.gov (United States)

    Kamata, Hiroki

    This article discusses the U.S. and European national strategies and policies for information society. Coping with the declining competitiveness in high-tech products and Japanese technological advantages both have been trying hard to strengthen technology base and to deregulate the telecommunications services markets. The U.S. approach in 1980's, unlike its liberalist principle, has been characterized by technological protectlonism and defense-oriented policies. European Communities' approach has been more comprehensive and systematic, investing heavily telecommunication infrastructure, deregulating domestic market, and promoting cooperation of member countries. However, both of these approaches have, so far, been unable to achieve a considerable success.

  11. Connecting Science with Society

    DEFF Research Database (Denmark)

    awareness of the important questions of our society reflected in scientific research and of the answers produced by these research activities. The CRIS2010 conference, entitled “Bringing Science to Society”, therefore seeks to highlight the role of Current Research Information Systems for communicating......, for driving innovation or for disseminating results to the scientific community and beyond. And, as a look at the CRIS2010 conference program will tell, there are many more, often little known purposes for which CRIS are used. These applications stimulate with their demands the progress in designing, building...

  12. Transnationalising Civil Society?

    DEFF Research Database (Denmark)

    Jørgensen, Martin Bak

    The paper takes a transnational perspective on developing an analytical framework for understanding how transnationalism interacts with civil society and how immigrant organisations use transnational strategies to challenge the pre-given positions of immigrants within given integration......- and citizenship-regimes. Locating transnationalism as part of the political opportunity structure also indicates that the state(s) to some degree can facilitate transnationalism, directly and indirectly. A substantial part of political engagement now occurs via transnational channels. What is uncertain is to what...

  13. The plutonium society

    International Nuclear Information System (INIS)

    Mez, L.; Richter, M.

    1981-01-01

    The lectures of an institute are reported on, which took place between 25th and 27th January 1980 in Berlin. The subsequent public panel discussion with representations from the political parties is then documentated in a few press-reports. The themes of the 8 lectures are: views and facts on plutonium, plutonium as an energy resource, military aspects of the production of plutonium, economic aspects of the plutonium economy, the position of the trade unions on the industrial reconversion, the alleged inevitability of a plutonium society and the socio-political alternatives and perspectives of nuclear waste disposal. (UA) [de

  14. North American Society for Pediatric Gastroenterology, Hepatology and Nutrition

    Science.gov (United States)

    North American Society for Pediatric Gastroenterology, Hepatology and Nutrition Skip to Navigation NASPGHAN Annual Meeting and Postgraduate ... transition well. Moreover, Doc4me provides information about medications, nutrition and living with IBD. Please help us promote ...

  15. Medicalization, markets and consumers.

    Science.gov (United States)

    Conrad, Peter; Leiter, Valerie

    2004-01-01

    This paper examines the impact of changes in the medical marketplace on medicalization in U.S. society. Using four cases (Viagra, Paxil, human growth hormone and in vitro fertilization), we focus on two aspects of the changing medical marketplace: the role of direct-to-consumer advertising of prescription drugs and the emergence of private medical markets. We demonstrate how consumers and pharmaceutical corporations contribute to medicalization, with physicians, insurance coverage, and changes in regulatory practices playing facilitating roles. In some cases, insurers attempt to counteract medicalization by restricting access. We distinguish mediated and private medical markets, each characterized by differing relationships with corporations, insurers, consumers, and physicians. In the changing medical environment, with medical markets as intervening factors, corporations and insurers are becoming more significant determinants in the medicalization process.

  16. Re-irradiation associated to cetuximab and paclitaxel in the recurrences in irradiated field of upper aero-digestive ducts tumors resistant to platina salts; Re-irradiation associee au cetuximab et au paclitaxel dans les recidives en territoire irradie des tumeurs des voies aero-digestives superieures resistantes aux sels de platine

    Energy Technology Data Exchange (ETDEWEB)

    Martin, L.M. [Centre Guillaume-Le-Conquerant, 76 - Le Havre (France); Moran, A.R.; Pavlovitch, J.M. [Clinique du Petit-Colmoulin, 76 - Harfleur (France); El Amarti, R. [Hopital Monod, 76 - Montivilliers (France); Damour, M. [CMC Ormeaux-Vauban, 76 - Le Havre (France)

    2007-11-15

    The objective of this study is to present the preliminary results of the toxicity and efficiency evaluation of the association 're-irradiation-cetuximab-paclitaxel' in the recurrences of upper aero-digestive ducts tumors in irradiated field resistant to platinum salts. (N.C.)

  17. Delphi-RAND consensus of the Spanish Society of Internal Medicine on the controversies in anticoagulant therapy and prophylaxis in medical diseases. INTROMBIN Project (Uncertainty in thromboprophylaxis in internal medicine).

    Science.gov (United States)

    Ruiz-Ruiz, F; Medrano, F J; Navarro-Puerto, M A; Rodríguez-Torres, P; Romero-Alonso, A; Santos-Lozano, J M; Alonso-Ortiz Del Rio, C; Varela-Aguilar, J M; Calderón, E J; Marín-León, I

    2018-05-21

    The aim of this study was to determine the opinion of internists on the management of anticoagulation and thromboembolism prophylaxis in complex clinical scenarios in which the risk-benefit ratio of surgery is narrow and to develop a consensus document on the use of drugs anticoagulant therapy in this patient group. To this end, we identified by consensus the clinical areas of greatest uncertainty, a survey was created with 20 scenarios laid out in 40 clinical questions, and we reviewed the specific literature. The survey was distributed among the internists of the Spanish Society of Internal Medicine (SEMI) and was completed by 290 of its members. The consensus process was implemented by changing the Delphi-RAND appropriateness method in an anonymous, double-round process that enabled an expert panel to identify the areas of agreement and uncertainty. In our case, we also added the survey results to the panel, a methodological innovation that helps provide additional information on the standard clinical practice. The result of the process is a set of 19 recommendations formulated by SEMI experts, which helps establish guidelines for action on anticoagulant therapy in complex scenarios (high risk or active haemorrhage, short life expectancy, coexistence of antiplatelet therapy or comorbidities such as kidney disease and liver disease), which are not uncommon in standard clinical practice. Copyright © 2018 Elsevier España, S.L.U. and Sociedad Española de Medicina Interna (SEMI). All rights reserved.

  18. Nuclear power and modern society

    International Nuclear Information System (INIS)

    Komarek, A.

    1999-01-01

    A treatise consisting of the following sections: Development of modern society (Origin of modern society; Industrial society; The year 1968; Post-industrial society; Worldwide civic society); Historic breaks in the development of the stationary power sector (Stationary thermal power; Historic breaks in the development of nuclear power); Czech nuclear power engineering in the globalization era (Major causes of success of Czech nuclear power engineering; Future of Czech nuclear power engineering). (P.A.)

  19. Electron-beam-welded segmental heat pipes of AlMgSi 1 for the thermal model of the satellite Aeros-A

    Energy Technology Data Exchange (ETDEWEB)

    Hoell, H.; Lasar, H.

    1974-07-01

    For the purposes of tests with the thermal model of the German aeronomy satellite Aeros-A, a heat pipe system of optimized weight was developed in order to transport thermal energy from the solar cells of the cylindrical satellite to the conical bottom. Because of stringent requirements on the fabrication process, electron beam welding is used for bonding. The welding process is described and preliminary test results are given. (LEW)

  20. THE APPLICATION OF REMOTE SENSING AND AERO-GEOPHYSICS DATA FUSION ON METALLOGENIC PROGNOSIS IN QIMANTAGE OF EAST KUNLUN MONTAIN AREA

    OpenAIRE

    Jia, W.; Zhang, H.; Lin, J.; Zhao, H.

    2013-01-01

    Based on west of Qimantage of East Kunlun mountain area, takes advantage of ASTER data, according to the altered mineral spectral characteristics, remote sensing alteration information is extracted. Incorporation the anomaly extraction results with high-precision aero geophysical data processing results, a multiple resource information fusion model is proposed. The fusion model of two totally different type of data which is a special attention in geospatial academia now, which can im...

  1. Final report from the Spanish Society of Radiotherapy and Oncology Infrastructures Commission about department standards recommendable in radiation oncology

    International Nuclear Information System (INIS)

    Esco, R.; Pardo, J.; Palacios, A.; Biete, A.; Fernandez, J.; Valls, A.; Herrazquin, L.; Roman, P.; Magallon, R.

    2001-01-01

    The publication of the Royal Decree 1566/1988 of July 17 th , about Quality Assurance and Control in Radiation Therapy, mandates the elaboration of protocols in Radiation Therapy. Those protocols must contemplate the material and human resources necessary to implement a quality practical radiation therapy according to law. In order to establish norms regarding human and material resources, it is necessary to establish beforehand some patient care standards that serve as a frame of reference to determine the resources needed for each procedure. Furthermore, the necessary coordination of resources, material and humans that have to be present in a correct patient care planning, mandates the publication of rules that are easy to interpret and follow up. In this direction, both editions of the 'White Book of Oncology in Spain', the 'GAT Document for Radiotherapy', and the rules edited by the Committee of Experts in Radiation Therapy of the Academy of Medical Sciences of Catalunya and Balears, have represented an important advance in the establishment of these criteria in Spain. The Spanish Society of Radiation Therapy and Oncology (AERO), in an attempt to facilitate to all its associates and the health authorities some criteria for planning and implementing resources, requested its Commission of Infrastructures to elaborate a set of rules to determine the necessary resources in each radiation therapy procedure. The objective of this document is to establish some recommendations about the minimal necessities of treatment units and staff, determining their respective work capabilities, to be able to develop a quality radiation therapy in departments already existing. In summary, it is intended that the patient care is limited in a way that quality is not affected by patient overload. Also it tries to offer the Public Administration some planning criteria useful to create the necessary services of Radiation Oncology, with the adequate resources, which will bring a

  2. Communicating Science to Society

    Science.gov (United States)

    Illingworth, Samuel; Muller, Jennifer; Leather, Kimberley; Morgan, William; O'Meara, Simon; Topping, David; Booth, Alastair; Llyod, Gary; Young, Dominique; Bannan, Thomas; Simpson, Emma; Percival, Carl; Allen, Grant; Clark, Elaine; Muller, Catherine; Graves, Rosemarie

    2014-05-01

    "Nothing in science has any value to society if it is not communicated." So goes the 1952 quote from Anne Roe, the noted twentieth century American psychologist and writer. She went on to say that "scientists are beginning to learn their social obligations", and now over 60 years later there is certainly evidence to support her assertions. As scientists, by communicating our research to the general public we not only better inform the tax payer where their money is being spent, but are also able to help put into context the topical environmental challenges and issues that society faces, as well as inspiring a whole new generation of future scientists. This process of communication is very much a two-way street; by presenting our work to people outside of our usual spheres of contemporaries, we expose ourselves to alternative thoughts and insights that can inspire us, as scientists, to take another look at our research from angles that we had never before considered. This work presents the results and experiences from a number of public engagement and outreach activities across the UK, in which geoscientists engaged and interacted with members of the general public. These include the design and implementation of Raspberry Pi based outreach activities for several hundred high school students; the process of running a successful podcast (http://thebarometer.podbean.com); hosting and participating in science events for thousands of members of the general public (e.g. http://www.manchestersciencefestival.com and http://sse.royalsociety.org/2013); and creating a citizen science activity that involved primary school children from across the UK. In communicating their research it is imperative that scientists interact with their audience in an effective and engaging manner, whether in an international conference, a classroom, or indeed down the pub. This work also presents a discussion of how these skills can be developed at an early stage in the careers of a research

  3. Nanotechnology and society

    International Nuclear Information System (INIS)

    Keller, Kenneth H.

    2007-01-01

    Past experience has shown that the successful introduction of a new technology requires careful attention to the interactions between the technology and society. These interactions are bi-directional: on the one hand, technology changes and challenges social patterns and, on the other hand, the governance structures and values of the society affect progress in developing the technology. Nanotechnology is likely to be particularly affected by these kinds of interactions because of its great promise and the unusually early public attention it has received. Moreover, it represents a new kind of experiment in packaging a rather wide range of fundamental research activities under a single 'mission-like' umbrella. Although this gives it more impetus as a field, it sets a higher bar for showing successful applications early on and because it links disparate fields, regulatory regimes reasonable for one kind of nanotechnology development may be inappropriately extended to others. There are a number of lessons to be gleaned from experience with the introduction of other technologies, which offer guidance with respect to what pitfalls to avoid and what issues to be sensitive to as we move forward with the development of nanotechnology applications. The problems encountered by nuclear power point out the dangers of over-promising and the role the need for the technology plays in ameliorating fears of risk. The public reaction to biomedical engineering and biotechnology highlights, in addition, the cultural factors that come into play when technologies raise questions about what is 'natural' and what is 'foreign' and what conceptions are involved in defining 'personhood'. In all cases, it has been clear that a main task for those introducing new technology is building public trust-in the safety of the technologies and the integrity of those introducing it. The advocates of nanotechnology have already shown that they are generally aware of the need to consider the public

  4. Simulating Global AeroMACS Airport Ground Station Antenna Power Transmission Limits to Avoid Interference With Mobile Satellite Service Feeder Uplinks

    Science.gov (United States)

    Wilson, Jeffrey D.

    2013-01-01

    The Aeronautical Mobile Airport Communications System (AeroMACS), which is based upon the IEEE 802.16e mobile wireless standard, is expected to be implemented in the 5091 to 5150 MHz frequency band. As this band is also occupied by Mobile Satellite Service feeder uplinks, AeroMACS must be designed to avoid interference with this incumbent service. The aspects of AeroMACS operation that present potential interference are under analysis in order to enable the definition of standards that assure that such interference will be avoided. In this study, the cumulative interference power distribution at low Earth orbit from transmitters at global airports was simulated with the Visualyse Professional software. The dependence of the interference power on antenna distribution, gain patterns, duty cycle, and antenna tilt was simulated. As a function of these parameters, the simulation results are presented in terms of the limitations on transmitter power from global airports required to maintain the cumulative interference power under the established threshold.

  5. Libraries in society

    DEFF Research Database (Denmark)

    Kristiansson, Michael; Skouvig, Laura Henriette Christine

    2008-01-01

    The purpose of the paper is to investigate the phenomenon of openness in relation to library development. The term openness is presented and related to library development from historical and theoretical perspectives. The paper elaborates on the differences over time on to how openness has been...... understood in a library setting. Historically, openness in form of the open shelves played a crucial role in developing the modern public library. The paper examines this openness-centred library policy as adopted by Danish public libraries in the beginning of the 20th century by applying the theories...... by Michel Foucault on discourse and power to the introduction of open shelves. Furthermore, the paper discusses current challenges facing the modern public library in coping with openness issues that follow from changes in society and advances in technology. These influences and developments are not least...

  6. Behaviorism and Society.

    Science.gov (United States)

    Krapfl, Jon E

    2016-05-01

    A probable list of causes for the limited acceptance of behaviorism in our society is identified. This is followed by a summary review of the proposed solutions identified in other papers in this special issue of The Behavior Analyst, most of which relate to either better marketing of either the behavior analytic process or the results achieved as a consequence. One paper proposes a more broad conception of behavior analysis. This paper endorses the solutions identified in previous papers and then goes on to propose an even more broad conception of behavior analysis and makes the point that behavior analysis is unlikely to flourish unless behavior analysts understand a good deal more about the cultural and other contextual features of the environments in which they work.

  7. Making Sense for Society

    Science.gov (United States)

    van der Heide, J. J.; Grus, M. M.; Nouwens, J. C. A. J.

    2017-09-01

    The Netherlands is a densely populated country. Cities in the metropolitan area (Randstad) will be growing at a fast pace in the coming decades1. Cities like Amsterdam and Rotterdam are being overrun by tourists. Climate change effects are noticed in cities (heavy rains for instance). Call for circular economy rises. Traffic increases. People are more self-reliant. Public space is shared by many functions. These challenges call for smart answers, more specific and directly than ever before. Sensor data is a cornerstone of these answers. In this paper we'll discuss the approaches of Dutch initiatives using sensor data as the new language to live a happy life in our cities. Those initiatives have been bundled in a knowledge platform called "Making sense for society" 1 https://www.cbs.nl/nl-nl/nieuws/2016/37/pbl-cbs-prognose-groei-steden-zet-door (in dutch)

  8. Nuclear Research and Society

    Energy Technology Data Exchange (ETDEWEB)

    Eggermont, G

    2000-07-01

    In 1998, SCK-CEN took the initiative to include social sciences and humanities into its research programme. Within this context, four projects were defined, respectively on sustainability and nuclear development; transgenerational ethics related to the disposal of long-lived radioactive waste; legal aspects and liability; emergency communication and risk perception. Two reflection groups were established, on expert culture and ethical choices respectively, in order to deepen insight while creating exchange of disciplinary approaches of the committed SCK-CEN researchers and social scientists. Within the context of SCK-CEN's social sciences and humanities programme, collaborations with various universities were initiated, teams consisting of young doctorate and post-doctorate researchers and university promotors with experience in interaction processes of technology with society were established and steering committees with actors and external experts were set up for each project. The objectives and main achievements in the four projects are summarised.

  9. Nuclear Research and Society

    International Nuclear Information System (INIS)

    Eggermont, G.

    2000-01-01

    In 1998, SCK-CEN took the initiative to include social sciences and humanities into its research programme. Within this context, four projects were defined, respectively on sustainability and nuclear development; transgenerational ethics related to the disposal of long-lived radioactive waste; legal aspects and liability; emergency communication and risk perception. Two reflection groups were established, on expert culture and ethical choices respectively, in order to deepen insight while creating exchange of disciplinary approaches of the committed SCK-CEN researchers and social scientists. Within the context of SCK-CEN's social sciences and humanities programme, collaborations with various universities were initiated, teams consisting of young doctorate and post-doctorate researchers and university promotors with experience in interaction processes of technology with society were established and steering committees with actors and external experts were set up for each project. The objectives and main achievements in the four projects are summarised

  10. Food, energy and society

    Energy Technology Data Exchange (ETDEWEB)

    Pimental, D; Pimental, M

    1979-01-01

    Twelve chapters are presented in this book - the first four of which concern hunter-gatherer society, the development of agricultural systems, and an introduction to the relative energy costs of manpower, animal power and machines in food production. The main section of the book (Chapters 6-9) documents the energy use in the production of livestock, grain and legumes, fruit, vegetable and forage, and fish. Comparisons of energy inputs and outputs are made for different crops and for countries at different levels of development. The final section of the book covers food processing, packaging and transport costs. The message of the book is that a switch from the high overall protein and high animal protein diet in the industrialized countries is overdue. Such a move, the author maintains, will reduce the total fossil fuel requirements for food production and enable more people to be adequately fed. The author also recommends extensive use of bicycles for transportation.

  11. War and society

    Directory of Open Access Journals (Sweden)

    Upeniece V.

    2016-01-01

    Full Text Available A discussion of effects of war on society is desirable as it can stimulate nations and their politicians to refrain in their international and non-international relations from the threat or use of force against the territorial integrity or political independence of the state. The prohibition of the use of force is a valid norm of customary international law and is fixed in the Charter of the United Nations. Any specific use of force can be lawful only if it is based on exceptions of this rule (action of self-defence under the Article 51 or action under specific authorization by the Security Council under Chapter VII. However the main issue is how to ensure that the other states respect this principle of non-use of force.

  12. Expectations from Society

    International Nuclear Information System (INIS)

    Blowers, A.

    2008-01-01

    Prof. A. Blowers observed that the social context within which radioactive waste management is considered has evolved over time. The early period where radioactive waste was a non-issue was succeeded by a period of intense conflict over solutions. The contemporary context is more consensual, in which solutions are sought that are both technically sound and socially acceptable. Among the major issues is that of inter-generational equity embraced in the question: how long can or should our responsibility to the future extend? He pointed out the differences in timescales. On the one hand, geo-scientific timescales are very long term, emphasizing the issue of how far into the future it is possible to make predictions about repository safety. By contrast, socio cultural timescales are much shorter, focusing on the foreseeable future of one or two generations and raising the issue of how far into the future we should be concerned. He listed. the primary expectations from society which are: safety and security to alleviate undue burdens to future generations and flexibility in order to enable the future generations to have a stake in decision making. The need to reconcile the two had led to a contemporary emphasis on phased geological disposal incorporating retrievability. However, the long timescales for implementation of disposal provided for sufficient flexibility without the need for retrievability. Future generations would inevitably have sold stake in decision making. Prof. A.. Blowers pointed out that society is also concerned with participation in decision making for implementation. The key elements for success are: openness and transparency, staged process, participation, partnership, benefits to enhance the well being of communities and a democratic framework for decision making, including the ratification of key decisions and the right for communities to withdraw from the process up to a predetermined point. This approach for decision making may also have

  13. Risks, society and regulation

    International Nuclear Information System (INIS)

    Tubiana, M.

    1999-01-01

    The aim of this presentation is the public opinion on public health. When the expectation of life increase, the public feel it is threaten by the pollution and new virus. With the assistance of many example as paludism and DDT, the danger of Concorde for the ozone layer or the the mineral waters containing radioactive elements, he shows how the risks are bad discerned by the public. He strongly advices a better information of the public and also a better training of students in medical courses. (A.L.B.)

  14. Current practice in laboratory diagnostics of autoimmune diseases in Croatia. 
Survey of the Working group for laboratory diagnostics of autoimmune diseases of the Croatian Society of Medical Biochemistry and Laboratory Medicine.

    Science.gov (United States)

    Kuna, Andrea Tešija; Đerek, Lovorka; Kozmar, Ana; Drvar, Vedrana

    2016-10-15

    With the trend of increasing incidence of autoimmune diseases, laboratories are faced with exponential growth of the requests for tests relating the diagnosis of these diseases. Unfortunately, the lack of laboratory personnel experienced in this specific discipline of laboratory diagnostic, as well as an unawareness of a method limitation often results in confusion for clinicians. The aim was to gain insight into number and type of Croatian laboratories that perform humoral diagnostics with the final goal to improve and harmonize laboratory diagnostics of autoimmune diseases in Croatia. In order to get insight into current laboratory practice two questionnaires, consisting of 42 questions in total, were created. Surveys were conducted using SurveyMonkey application and were sent to 88 medical biochemistry laboratories in Croatia for the first survey. Out of 33 laboratories that declared to perform diagnostic from the scope, 19 were selected for the second survey based on the tests they pleaded to perform. The survey comprised questions regarding autoantibody hallmarks of systemic autoimmune diseases while regarding organ-specific autoimmune diseases was limited to diseases of liver, gastrointestinal and nervous system. Response rate was high with 80 / 88 (91%) laboratories which answered the first questionnaire, and 19 / 19 (1.0) for the second questionnaire. Obtained results of surveys indicate high heterogeneity in the performance of autoantibody testing among laboratories in Croatia. Results indicate the need of creating recommendations and algorithms in order to harmonize the approach to laboratory diagnostics of autoimmune diseases in Croatia.

  15. The National Cardiac Societies of the European Society of Cardiology.

    Science.gov (United States)

    Atar, Dan

    2015-06-01

    The National Cardiac Societies are one of the Constituent Bodies of the European Society of Cardiology (ESC). They are the backbone of the ESC and together form the "Cardiology of Europe" in 56 European and Mediterranean countries.

  16. Policies and practices in haemostasis testing among laboratories in Croatia: a survey on behalf of a Working Group for Laboratory Coagulation of the Croatian Society of Medical Biochemistry and Laboratory Medicine.

    Science.gov (United States)

    Bronić, Ana; Herak, Desiree Coen; Margetić, Sandra; Milić, Marija

    2017-02-15

    The objective of this survey was to assess current policies and practice in haemostasis testing among both hospital and outpatient laboratories in Republic of Croatia. A questionnaire with seventy questions divided into nine sections was created in May 2015. Participants were asked about their practice related to test request form, sample collection, prothrombin time (PT) and activated partial thromboplastin time assays, other individual haemostasis assays, point-of-care testing (POCT), reporting of coagulation tests results and quality assurance of procedures, the personnel and other laboratory resources, as well as on issues related to education and implementation of additional coagulation assays in their laboratory. The survey was administered and data were collected between June and September 2015. A total survey response rate was 104/170 (61.2%). Most respondents were faced with incomplete information on prescribed therapy and diagnosis on the test request or inappropriate samples withdrawn on distant locations, but also do not have protocols for handling samples with high haematocrit values. Reporting of PT-INR and D-dimer results was different between laboratories. Although almost all laboratories developed a critical value reporting system, reporting a value to general practitioners is still a problem. Result on coagulation POCT testing showed that not all devices were supervised by laboratories, which is not in compliance with Croatian Chamber of Medical Biochemistry acts. Obtained results highlighted areas that need improvement and different practice patterns in particular field of haemostasis testing among laboratories. A harmonization of the overall process of haemostasis testing at national level should be considered and undertaken.

  17. Nuclear energy and society

    International Nuclear Information System (INIS)

    Baiquni, A.

    1982-01-01

    A great deal of energy will be needed for industrial development. The risks of energy production can be either individual or social in nature. Individual risk occurs in different places and different times to individuals in a certain period of time. Social risk occurs to several people in a time. People tend to refuse a nuclear power plant because of its social risk. This attitude is based more on feelings than reason. In fact radiation from a nuclear power plant is only 0.15% while radiation from medical instruments and from the environment is 99%. From the safety, pollution effect, price, and uses point of view, it can be concluded that nuclear energy is the most appropriate energy to face the future of the nation. (RUW)

  18. Resources available in society

    International Nuclear Information System (INIS)

    Berg, S.E.

    1997-01-01

    A decontamination operation will only be successful if cost-efficient methods are used. The cost-effectiveness depends, among many other factors, including the qualifications and training of the personnel and the capability of the equipment. The personnel must be able to handle the equipment in a professional way and should also know how to protect themselves. To fulfil these requirements they need courses in radiation protection. The equipment must be suitable for the selected countermeasure. Societies planning and preparedness for reclamation should meet realistic demands for early actions and outline a cost-effective strategy that implies reasonable use of personnel and equipment resources. Planning for early cleanup actions is different from that of long term planning with respect to the available time and quantity and quality of available information on which to base decisions. Available resources vary, of course, between the Nordic countries, but in all countries there are organisations with both knowledgeable staff and suitable equipment accessible for decontamination operations. (EG)

  19. Ethic, society and environment

    International Nuclear Information System (INIS)

    Angel Maya, Augusto

    2000-01-01

    This article is a reproduction of parts the fourth chapter of the book the return of Icaro, Death and life of the philosophy; the Universidad Autonoma de Occidente will publish that. The book intends to debate the crossroad in which any environmental interpretation is finned: penned between the reductionism of natural sciences and the philosophical sobrenaturalism of the social science. Between some natural sciences that don't understand the man and some social sciences that don't recognize the bonds with the nature if this approach is applied to the study of society or of culture, it would be necessary to understand it as the result of a evolutionary process, but also at the same time as a rupture with the previous evolutionary forms. The culture is not in the genes, but it has relationships with nature, the social sciences have not wanted to accept this fact. It has ethical and political consequences. As well as there is no ecosystem ethics, all human ethics should be aware of its relationships with the environment. Maybe this proposal will bring a new vision of what is freedom

  20. Institutional practices and policies in acid-base testing: a self reported Croatian survey study on behalf of the Croatian society of medical biochemistry and laboratory medicine Working Group for acid-base balance.

    Science.gov (United States)

    Dukić, Lora; Simundić, Ana-Maria

    2014-01-01

    The aim of this survey study was to assess the current practices and policies in use related to the various steps in the blood gas testing process, across hospital laboratories in Croatia. First questionnaire was sent by email to all medical biochemistry laboratories (N = 104) within general, specialized and clinical hospitals and university hospital centres to identify laboratories which perform blood gas analysis. Second questionnaire with detailed questions about sample collection, analysis and quality control procedures, was sent only to 47 laboratories identified by the first survey. Questionnaire was designed as combination of questions and statements with Likert scale. Third questionnaire was sent to all participating laboratories (N=47) for additional clarification for either indeterminate or unclear answers. Blood gas analysis is performed in 47/104 hospital laboratories in Croatia. In 25/41 (0.61) of the laboratories capillary blood gas sampling is the preferred sample type for adult patient population, whereas arterial blood sample is preferentially used in only 5/44 laboratories (0.11). Blood sampling and sample processing for capillary samples is done almost always by laboratory technicians (36/41 and 37/44, respectively), whereas arterial blood sampling is almost always done by the physician (24/29) and only rarely by a nurse (5/28). Sample acceptance criteria and sample analysis are in accordance with international recommendations for majority of laboratories. 43/44 laboratories participate in the national EQA program. POCT analyzers are installed outside of the laboratory in 20/47 (0.43) institutions. Laboratory staff is responsible for education and training of ward personnel, quality control and instrument maintenance in only 12/22, 11/20 and 9/20 institutions, respectively. Practices related to collection and analysis for blood gases in Croatia are not standardised and vary substantially between laboratories. POCT analyzers are not under the

  1. Aero-thermal optimization of film cooling flow parameters on the suction surface of a high pressure turbine blade

    Science.gov (United States)

    El Ayoubi, Carole; Hassan, Ibrahim; Ghaly, Wahid

    2012-11-01

    This paper aims to optimize film coolant flow parameters on the suction surface of a high-pressure gas turbine blade in order to obtain an optimum compromise between a superior cooling performance and a minimum aerodynamic penalty. An optimization algorithm coupled with three-dimensional Reynolds-averaged Navier Stokes analysis is used to determine the optimum film cooling configuration. The VKI blade with two staggered rows of axially oriented, conically flared, film cooling holes on its suction surface is considered. Two design variables are selected; the coolant to mainstream temperature ratio and total pressure ratio. The optimization objective consists of maximizing the spatially averaged film cooling effectiveness and minimizing the aerodynamic penalty produced by film cooling. The effect of varying the coolant flow parameters on the film cooling effectiveness and the aerodynamic loss is analyzed using an optimization method and three dimensional steady CFD simulations. The optimization process consists of a genetic algorithm and a response surface approximation of the artificial neural network type to provide low-fidelity predictions of the objective function. The CFD simulations are performed using the commercial software CFX. The numerical predictions of the aero-thermal performance is validated against a well-established experimental database.

  2. Aerosol Vacuum-Assisted Plasma Ionization (Aero-VaPI) Coupled to Ion Mobility-Mass Spectrometry

    Science.gov (United States)

    Blair, Sandra L.; Ng, Nga L.; Zambrzycki, Stephen C.; Li, Anyin; Fernández, Facundo M.

    2018-02-01

    In this communication, we report on the real-time analysis of organic aerosol particles by Vacuum-assisted Plasma Ionization-Mass Spectrometry (Aero-VaPI-MS) using a home-built VaPI ion source coupled to a Synapt G2-S HDMS ion mobility-mass spectrometry (IM-MS) system. Standards of organic molecules of interest in prebiotic chemistry were used to generate aerosols. Monocaprin and decanoic acid aerosol particles were successfully detected in both the positive and negative ion modes, respectively. A complex aerosol mixture of different sizes of polymers of L-malic acid was also examined through ion mobility (IM) separations, resulting in the detection of polymers of up to eight monomeric units. This noncommercial plasma ion source is proposed as a low cost alternative to other plasma ionization platforms used for aerosol analysis, and a higher-performance alternative to more traditional aerosol mass spectrometers. VaPI provides robust online ionization of organics in aerosols without extensive ion activation, with the coupling to IM-MS providing higher peak capacity and excellent mass accuracy. [Figure not available: see fulltext.

  3. The effect of harmonized emissions on aerosol properties in global models – an AeroCom experiment

    Directory of Open Access Journals (Sweden)

    C. Textor

    2007-08-01

    Full Text Available The effects of unified aerosol sources on global aerosol fields simulated by different models are examined in this paper. We compare results from two AeroCom experiments, one with different (ExpA and one with unified emissions, injection heights, and particle sizes at the source (ExpB. Surprisingly, harmonization of aerosol sources has only a small impact on the simulated inter-model diversity of the global aerosol burden, and consequently global optical properties, as the results are largely controlled by model-specific transport, removal, chemistry (leading to the formation of secondary aerosols and parameterizations of aerosol microphysics (e.g., the split between deposition pathways and to a lesser extent by the spatial and temporal distributions of the (precursor emissions.

    The burdens of black carbon and especially sea salt become more coherent in ExpB only, because the large ExpA diversities for these two species were caused by a few outliers. The experiment also showed that despite prescribing emission fluxes and size distributions, ambiguities in the implementation in individual models can lead to substantial differences.

    These results indicate the need for a better understanding of aerosol life cycles at process level (including spatial dispersal and interaction with meteorological parameters in order to obtain more reliable results from global aerosol simulations. This is particularly important as such model results are used to assess the consequences of specific air pollution abatement strategies.

  4. A Mission Concept: Re-Entry Hopper-Aero-Space-Craft System on-Mars (REARM-Mars)

    Science.gov (United States)

    Davoodi, Faranak

    2013-01-01

    Future missions to Mars that would need a sophisticated lander, hopper, or rover could benefit from the REARM Architecture. The mission concept REARM Architecture is designed to provide unprecedented capabilities for future Mars exploration missions, including human exploration and possible sample-return missions, as a reusable lander, ascend/descend vehicle, refuelable hopper, multiple-location sample-return collector, laboratory, and a cargo system for assets and humans. These could all be possible by adding just a single customized Re-Entry-Hopper-Aero-Space-Craft System, called REARM-spacecraft, and a docking station at the Martian orbit, called REARM-dock. REARM could dramatically decrease the time and the expense required to launch new exploratory missions on Mars by making them less dependent on Earth and by reusing the assets already designed, built, and sent to Mars. REARM would introduce a new class of Mars exploration missions, which could explore much larger expanses of Mars in a much faster fashion and with much more sophisticated lab instruments. The proposed REARM architecture consists of the following subsystems: REARM-dock, REARM-spacecraft, sky-crane, secure-attached-compartment, sample-return container, agile rover, scalable orbital lab, and on-the-road robotic handymen.

  5. The Society for Translational Medicine

    DEFF Research Database (Denmark)

    Gao, Shugeng; Zhang, Zhongheng; Aragón, Javier

    2017-01-01

    The Society for Translational Medicine and The Chinese Society for Thoracic and Cardiovascular Surgery conducted a systematic review of the literature in an attempt to improve our understanding in the postoperative management of chest tubes of patients undergoing pulmonary lobectomy. Recommendati......The Society for Translational Medicine and The Chinese Society for Thoracic and Cardiovascular Surgery conducted a systematic review of the literature in an attempt to improve our understanding in the postoperative management of chest tubes of patients undergoing pulmonary lobectomy...

  6. Indicators of Information Society Measurement :

    Directory of Open Access Journals (Sweden)

    Hind Elwy

    2006-09-01

    Full Text Available The indicator of information society describe the infrastructure of information and communication technology ; as well as it’s use and it’s production in different estate of society. The importance economic and social of tic is crescent in modern society. and the presentation of tendency inform above the situation of information society . in this article we want to describe the indicator of tic in Algeria according to librarian’s vision in Mentouri university

  7. Knowledge society training system

    International Nuclear Information System (INIS)

    Ceclan, Mihail; Ionescu, Tudor Basarab; Ceclan, Rodica Elena; Tatar, Florin; Tiron, Cristian; Georgescu, Luisa Maria

    2005-01-01

    The paper aims to present the results of the Cernavoda NPP Training Department modernization project. In order to achieve a knowledge society training system, in the first stage of the project a Computer Based Training (CBT) or E-Learning software platform and several CBT objects/courses have been implemented. The conceived solution is called CBTCenter which is a complete E-Learning and CBT system, offering a variety of teaching and learning tools and services to its users. CBT and/or E-Learning always mean two things: a software platform and content authoring. Ideally, a software platform should be able to import any type of flat documentation and integrate it into a structured database which keeps track of pedagogically meaningful information like the student's progress in studying materials, tests and quizzes, grades, etc. At the same time, the materials, the study and the tests have to be organized around certain objectives which play the role of guidelines during the entire educational activity. An example of such a course which has been successfully integrated into CBTCenter is Labour safety - code name BB-001. The implementation of the CBT technology at NPP Cernavoda Training Department has brought several advantages: the technology improves overall communication between all individuals which take part in the educational process; the classroom space problem has been considerably reduced; students can access training materials from their own desk using the NPP intranet; the logistics problems will decrease with the conversion of more and more conventional courses and materials into CBT objects/courses. (authors)

  8. Beyond high carbon society

    Directory of Open Access Journals (Sweden)

    Kuei Tien Chou

    2016-03-01

    Full Text Available In the past two decades, despite seemingly violating its policy of sustainable development, the government of Taiwan has continued to develop its petrochemical industry. As a result of which public resistance has emerged. This study examines the social robustness and sub-politics capacity of the movement against Kuo Kuang Petrochemical Corp. from 2010 to 2011. Among the various civil groups engaged in the movement, the anti-expert coalition was formed by local environmental, literary and medical groups as well as universities and university professors. These groups mobilized independently, while supporting one another; leading to a multi-risk movement coalition. One significant difference between this anti-expert coalition and past environmental movements was that it not only constructed systematic risk knowledge and resisted official discourse from a professional perspective, but also developed perceptual literary thought, triggering a response from the general public. Therefore, no matter whether it be through systematic, rational participation in the environmental assessment process, proposing socio-economic assessment and health risk paths or their more perceptual initiation of green thought processes (generation justice, land subsidence, good and agriculture safety and the sustainability of villages and methods of promoting civil trust, the sub-political pluralism has been able to break through authoritative expert politics, and seek for a dynamic reflexive governance of social sustainable development.

  9. MEDICAL PROFESSIONALISH

    Directory of Open Access Journals (Sweden)

    Jože Drinovec

    2002-12-01

    Full Text Available Background. Due to restrictions imposed on a clinical freedom, interest for professionalism in healthcare has been getting bigger not only in medicine literature and various mass media but also in teaching and organisation of healthcare. Professionalism stands not only for a medicine’s contract with society, recognition of a physician status, privilege and monopoly but also for a genuine physician’s commitment to professional responsibilities.Analysis. In 2002 European and American associations approved a document on medical professionalism in the new millenium, so-called Physician Charter. This document includes fundamental principles of professionalism such as altruism, patient autonomy and social justice. In particular, it analyses a physician’s professional competency, honesty with patients, patient confidentiality, appropriate relations with patients, improvements regarding a healthcare quality, healthcare access, just distribution of finite funds, commitment to scientific knowledge, trust maintenance by managing conflicts of interest and a professional responsibility.Conclusions. Physician’s professionalism means philosophycal and sociological analysis of his/her profession and its position in a society. It includes a concern for improvements of his/ her own scientific knowledge, skills, a genuine ethic interest for an individual patient bearing in mind principles of equality and justice in society. Whether performing an organisational and public work or participating in professional health organizations, physician’s interest for a patient must prevail.

  10. CERN & Society launches donation portal

    CERN Multimedia

    Cian O'Luanaigh

    2014-01-01

    The CERN & Society programme brings together projects in the areas of education and outreach, innovation and knowledge exchange, and culture and arts, that spread the CERN spirit of scientific curiosity for the inspiration and benefit of society. Today, CERN & Society is launching its "giving" website – a portal to allow donors to contribute to various projects and forge new relationships with CERN.   "The CERN & Society initiative in its embryonic form began almost three years ago, with the feeling that the laboratory could play a bigger role for the benefit of society," says Matteo Castoldi, Head of the CERN Development Office, who, with his team, is seeking supporters and ambassadors for the CERN & Society initiative. "The concept is not completely new – in some sense it is embedded in CERN’s DNA, as the laboratory helps society by creating knowledge and new technologies – but we would like to d...

  11. Paperless or vanishing society

    Science.gov (United States)

    Turner Luke, Joy

    2002-06-01

    In the 1940s color photography became available and within a few years, extremely popular. As people switched from black and white photographs made with the old metallic silver process to the new color films, pictures taken to record their lives and families began a slow disappearing act. The various color processes, coupled with the substrates they were printed on, affected their longevity, but many color photographs taken from the late 1950s through the 1970s, and even into the 1980s, faded not only when exposed to the light, but also when stored in the dark. Henry Wilhelm's excellent book 'The Permanence and Care of Color Photographs' documents this history in detail. Today we are making another transition in the storage of pictures and information. There are questions about the longevity of different types of digital storage, and also of the images printed by various types of inkjet printers, or by laser printers using colored toners. Very expensive and very beautiful works of art produced on Iris printers are appearing in art exhibitions. Some of these are referred to as Giclee prints and are offered on excellent papers. Artists are told the prints will last a lifetime; and if by change they don't it is only necessary to make another print. Henry Wilhelm has begun to test and rate these images for lightfastness; however, his test method was developed for examining longevity in colored photographs. It is of interest to find out how these prints will hold up in the tests required for fine art materials. Thus far companies producing digital inks and printers have not invested the time and money necessary to develop an American Society for Testing and Materials (ASTM) standard method for evaluating the lightfastness of digital prints. However, it is possible to use ASTM D 5383, Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists, to pinpoint colors that will fade in a short time, even though the test is not as

  12. Violence in society

    Directory of Open Access Journals (Sweden)

    António Pedro de Andrade Dores

    2014-07-01

    Full Text Available The recent interest in the sociology of violence has arisen at the same time that western societies are being urged to consider the profound social crisis provoked by global financial turmoil. Social changes demand the evo- lution of sociological practices. The analysis herein proposed, based on the studies of M. Wieviorka, La Violence (2005, and of R. Collins, Violence: A Micro-sociological Theory (2008, concludes that violence is subject to sociological treatments cen- tered on the aggressors, on the struggles for power and on male gender. There is a lack of connection between prac- tical proposals for violence prevention and the sociol- ogy of violence. It is accepted that violence as a subject of study has the potential, as well as the theoretical and social centrality, to promote the debate necessary to bring social theory up to date. This process is more likely to oc- cur in periods of social transformation, when sociology is open to considering subjects that are still taboo in its study of violence, such as the female gender and the state. The rise of the sociology of violence confronts us with a dilemma. We can either collaborate with the construc- tion of a sub discipline that reproduces the limitations and taboos of current social theory, or we can use the fact that violence has become a “hot topic” as an opportunity to open sociology to themes that are taboo in social the- ory (such as the vital and harmonious character of the biological aspects of social mechanisms or the normative aspects of social settings. ResumenEl interés reciente en la sociología de la violencia ha surgido al mismo tiempo que las sociedades occidenta- les están requiriendo considerar la profunda crisis social provocada por la agitación financiera global. Los cambios sociales demandan la evolución de las prácticas socioló- gicas. El análisis aquí expuesto, basado en los estudios de M. Wieviorka, La Violence (2005, and of R. Collins

  13. Functional Hypothalamic Amenorrhea: An Endocrine Society Clinical Practice Guideline.

    Science.gov (United States)

    Gordon, Catherine M; Ackerman, Kathryn E; Berga, Sarah L; Kaplan, Jay R; Mastorakos, George; Misra, Madhusmita; Murad, M Hassan; Santoro, Nanette F; Warren, Michelle P

    2017-05-01

    The American Society for Reproductive Medicine, the European Society of Endocrinology, and the Pediatric Endocrine Society. This guideline was funded by the Endocrine Society. To formulate clinical practice guidelines for the diagnosis and treatment of functional hypothalamic amenorrhea (FHA). The participants include an Endocrine Society-appointed task force of eight experts, a methodologist, and a medical writer. This evidence-based guideline was developed using the Grading of Recommendations, Assessment, Development, and Evaluation approach to describe the strength of recommendations and the quality of evidence. The task force commissioned two systematic reviews and used the best available evidence from other published systematic reviews and individual studies. One group meeting, several conference calls, and e-mail communications enabled consensus. Endocrine Society committees and members and cosponsoring organizations reviewed and commented on preliminary drafts of this guideline. FHA is a form of chronic anovulation, not due to identifiable organic causes, but often associated with stress, weight loss, excessive exercise, or a combination thereof. Investigations should include assessment of systemic and endocrinologic etiologies, as FHA is a diagnosis of exclusion. A multidisciplinary treatment approach is necessary, including medical, dietary, and mental health support. Medical complications include, among others, bone loss and infertility, and appropriate therapies are under debate and investigation. Copyright © 2017 Endocrine Society

  14. Medicinal Meditations on Korean History and Society

    Directory of Open Access Journals (Sweden)

    Laura C. Nelson

    2018-03-01

    Full Text Available Soyoung Suh. Naming the Local: Medicine, Language, and Identity in Korea since the Fifteenth Century. Cambridge, MA: Harvard University Press, 2017. 244 pp. $40 (cloth. Eunjung Kim. Curative Violence: Rehabilitating Disability, Gender, and Sexuality in Modern Korea. Durham, NC: Duke University Press, 2017. 312 pp. $100 (cloth; $26 (paper. Taken together, and particularly situated in the context of related studies of science and medicine in Korea and the East Asian region, Naming the Local and Curative Violence illustrate the productive power of ideas of health and wellness in the formation of Korean culture, society, and institutions. Medicine and medical care obviously are central elements of biopolitics, but the reach and complexity of their effects are often overlooked. Given the massive social and financial investments in health, it is no wonder that looking at South Korea through these lenses illuminates whole aspects of Korean society with new light...

  15. Formation of a collaborative society

    OpenAIRE

    Buřita, Ladislav; Ondryhal, Vojtěch

    2014-01-01

    The MilUNI knowledge portal, based on the knowledge base developed in ATOM software has been created at the authors' workplace with the aim to form a collaborative society of military universities. The analysis of the collaborative society concept is presented. The description of the MilUNI project is included. Some areas for university cooperation are proposed, as well as the measures facilitating the formation and development of the collaborative society.

  16. Science communication at scientific societies.

    Science.gov (United States)

    Braha, Jeanne

    2017-10-01

    Scientific societies can play a key role in bridging the research and practice of scientists' engagement of public audiences. Societies are beginning to support translation of science communication research, connections between scientists and audiences, and the creation of opportunities for scientists to engage publics without extensive customization. This article suggests roles, strategies, and mechanisms for scientific societies to promote and enhance their member's engagement of public audiences. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Effect of chevron nozzle penetration on aero-acoustic characteristics of jet at M = 0.8

    Science.gov (United States)

    Nikam, S. R.; Sharma, S. D.

    2017-12-01

    Aero-acoustic characteristics of a high-speed jet with chevron nozzles are experimentally investigated at a Mach number of 0.8. The main focus is to examine the effects of the extent of chevron penetration and its position in the mixing layer. Chevron nozzles with three different levels of penetration employed at three different longitudinal locations from the nozzle lip are tested, and the results are compared with those of a plain baseline nozzle. The chevrons are found to produce a lobed shear layer through the notched region, thereby increasing the surface area of the jet, particularly in the close vicinity of the nozzle, which increases the mixing and reduces the potential core length. This effect becomes more prominent with increasing penetration closer to the nozzle lip in the thinner mixing layer. Near field and far field noise measurements show distinctly different acoustic features due to chevrons. The chevrons are found to effectively shift the dominant noise source upstream closer to the nozzle. Present investigation proposes a simpler method for locating the dominant noise source from the peak of the centerline velocity decay rate. The overall noise levels registered along the jet edge immediately downstream of the chevrons are higher, but further downstream they are reduced in comparison with the plain baseline nozzle. Also, the chevrons beam the noise towards higher polar angles at higher frequencies. At shallow polar angles with respect to the jet axis in the far field, chevrons suppress the noise at low frequencies with increasing penetration, but for higher polar angles, while they continue to suppress the low frequency noise, at higher frequencies the trend is found to reverse. The noise measured in the near field close to the jet edge is composed of two components: acoustic and hydrodynamic. Of these two components, the chevrons are found to reduce the hydrodynamic component in comparison with the acoustic one.

  18. Effect of chevron nozzle penetration on aero-acoustic characteristics of jet at M = 0.8

    Energy Technology Data Exchange (ETDEWEB)

    Nikam, S R [K. J. Somaiya college of Engineering, Mumbai (India); Sharma, S D, E-mail: srnikam12@gmail.com [I.I.T. Bombay, Mumbai (India)

    2017-12-15

    Aero-acoustic characteristics of a high-speed jet with chevron nozzles are experimentally investigated at a Mach number of 0.8. The main focus is to examine the effects of the extent of chevron penetration and its position in the mixing layer. Chevron nozzles with three different levels of penetration employed at three different longitudinal locations from the nozzle lip are tested, and the results are compared with those of a plain baseline nozzle. The chevrons are found to produce a lobed shear layer through the notched region, thereby increasing the surface area of the jet, particularly in the close vicinity of the nozzle, which increases the mixing and reduces the potential core length. This effect becomes more prominent with increasing penetration closer to the nozzle lip in the thinner mixing layer. Near field and far field noise measurements show distinctly different acoustic features due to chevrons. The chevrons are found to effectively shift the dominant noise source upstream closer to the nozzle. Present investigation proposes a simpler method for locating the dominant noise source from the peak of the centerline velocity decay rate. The overall noise levels registered along the jet edge immediately downstream of the chevrons are higher, but further downstream they are reduced in comparison with the plain baseline nozzle. Also, the chevrons beam the noise towards higher polar angles at higher frequencies. At shallow polar angles with respect to the jet axis in the far field, chevrons suppress the noise at low frequencies with increasing penetration, but for higher polar angles, while they continue to suppress the low frequency noise, at higher frequencies the trend is found to reverse. The noise measured in the near field close to the jet edge is composed of two components: acoustic and hydrodynamic. Of these two components, the chevrons are found to reduce the hydrodynamic component in comparison with the acoustic one. (paper)

  19. Using Satellite Observations to Evaluate the AeroCOM Volcanic Emissions Inventory and the Dispersal of Volcanic SO2 Clouds in MERRA

    Science.gov (United States)

    Hughes, Eric J.; Krotkov, Nickolay; da Silva, Arlindo; Colarco, Peter

    2015-01-01

    Simulation of volcanic emissions in climate models requires information that describes the eruption of the emissions into the atmosphere. While the total amount of gases and aerosols released from a volcanic eruption can be readily estimated from satellite observations, information about the source parameters, like injection altitude, eruption time and duration, is often not directly known. The AeroCOM volcanic emissions inventory provides estimates of eruption source parameters and has been used to initialize volcanic emissions in reanalysis projects, like MERRA. The AeroCOM volcanic emission inventory provides an eruptions daily SO2 flux and plume top altitude, yet an eruption can be very short lived, lasting only a few hours, and emit clouds at multiple altitudes. Case studies comparing the satellite observed dispersal of volcanic SO2 clouds to simulations in MERRA have shown mixed results. Some cases show good agreement with observations Okmok (2008), while for other eruptions the observed initial SO2 mass is half of that in the simulations, Sierra Negra (2005). In other cases, the initial SO2 amount agrees with the observations but shows very different dispersal rates, Soufriere Hills (2006). In the aviation hazards community, deriving accurate source terms is crucial for monitoring and short-term forecasting (24-h) of volcanic clouds. Back trajectory methods have been developed which use satellite observations and transport models to estimate the injection altitude, eruption time, and eruption duration of observed volcanic clouds. These methods can provide eruption timing estimates on a 2-hour temporal resolution and estimate the altitude and depth of a volcanic cloud. To better understand the differences between MERRA simulations and volcanic SO2 observations, back trajectory methods are used to estimate the source term parameters for a few volcanic eruptions and compared to their corresponding entry in the AeroCOM volcanic emission inventory. The nature of

  20. Digital Denmark: From Information Society to Network Society

    DEFF Research Database (Denmark)

    Henten, Anders; Falch, Morten

    2000-01-01

    for a welfare society. However, globalisation and the spreading use of new information and communication technologies and services challenge this position. This article examines Denmark's performance in implementing its IS 2000 plans, the background to the Digital Denmark report, and its implications......The Danish Government recently issued a new policy report, Digital Denmark, on the "conversion to a network society", as a successor to its Information Society 2000 report (1994). This is part of a new round of information society policy vision statements that are, or will be forthcoming from...... national governments everywhere. Denmark provides an interesting case study because it ranks high in the benchmark indicators of information network society developments. This position has been obtained largely by public sector initiatives and without erosion of the highly reputed Scandinavian model...

  1. Hyaluronic Acid: Perspectives in Upper Aero-Digestive Tract. A Systematic Review.

    Directory of Open Access Journals (Sweden)

    Manuele Casale

    Full Text Available To date, topical therapies guarantee a better delivery of high concentrations of pharmacologic agents to the mucosa of the upper aerodigestive tract (UADT. The use of topical drugs, which are able to reduce mucosal inflammation and to improve healing tissues, can represent a relevant therapeutic advance. Topical sodium hyaluronate (SH has recently been recognized as adjuvant treatment in the chronic inflammatory disease of the UADT.The aim of our work was to review the published literature regarding all the potential therapeutic effects of SH in the chronic inflammatory disease of UADT.Relevant published studies were searched in Pubmed, Google Scholar, Ovid using keywords ("sodium hyaluronate" and "upper airways" or Medical Subject Headings.At the end of our selection process, sixteen publications have been included. Six of them in the post-operative period of nasal-sinus surgery, 2 of them in pediatric patients affected by recurrent upper respiratory tract infections, 4 of them in reducing symptoms and preventing exacerbations of chronic upper airways in adult population, 4 of them in patients with chronic inflammatory disease of UADT, including gastro-esophageal reflux disease (GERD.Topical administration of SH plays a pivotkey role in the postoperative phase of patients undergoing FESS and nasal surgery, and positive results are generally observed in all the patients suffering from UADT chronic inflammatory disease.

  2. Retrospective study of the evolution of nutritional, inflammatory and bacteriological profiles of patients suffering from inoperable aero-digestive duct tumour during sequential or concomitant chemo-radiotherapy

    International Nuclear Information System (INIS)

    Martin, L.; Brocard, C.; Coudray, C.; Pavlovitch, J.M.

    2010-01-01

    The authors report a retrospective study which aimed at analysing a cohort of consecutive patients in terms of clinic and biological aspects reflecting their nutritional and inflammatory status as well as the status of their buccal bacterial flora during a sequential or concomitant chemo-radiotherapy. The objective was to detect a possible difference between these both therapeutic modalities, and a possible relationship with toxicity. Several data have been collected for patients suffering from inoperable aero-digestive tract tumour: weight, body mass index, prealbumin, albumin, orosomucoid, C-reactive protein, PINI index, and buccal bacterial flora. The evolution of these nutritional biological criteria appears to depend on the treatment modality. Short communication

  3. Stability of two-degrees-of-freedom aero-elastic models with frequency and time variable parametric self-induced forces

    Czech Academy of Sciences Publication Activity Database

    Náprstek, Jiří; Pospíšil, Stanislav; Yau, J. D.

    2015-01-01

    Roč. 57, August (2015), s. 91-107 ISSN 0889-9746 R&D Projects: GA MŠk(CZ) LO1219; GA ČR(CZ) GC13-34405J Institutional support: RVO:68378297 Keywords : aero-elastic system * self-excited vibration * dynamic stability * Routh–Hurwitz conditions * flutter derivatives * divergence Subject RIV: JM - Building Engineering Impact factor: 1.709, year: 2015 http://dx.doi.org/10.1016/j.jfluidstructs.2015.05.010

  4. Arab doctors, evolving society and corruption: a medical student's perspective.

    Science.gov (United States)

    Alamri, Yassar

    2015-01-01

    Doctors, especially junior doctors, face immense pressure in their day-to-day work. As a result, the rates of depression and anxiety are particularly high in this demanding profession. The pressure, which is compounded by constantly being under societal scrutiny, can unfortunately drive the doctor to breaking point. However, we can help doctors deal with these pressures in a more meaningful way if we make them aware of their wider environment (within a social paradigm) and the implications of their actions.

  5. [Podoconiosis, a society and medical community neglected disease].

    Science.gov (United States)

    Prieto-Pérez, Laura; Soriano Cea, Juan José; Górgolas Hernández-Mora, Miguel

    2015-11-20

    Podoconiosis, mossy foot or endemic non-filarial elephantiasis, is a geochemical disease that causes lower limb lymphedema; it is directly related to walking barefoot over soils of volcanic origin, in areas with a high pluviometric annual index. It has a specific geographical distribution, affecting around 5% population in areas where it is endemic. It is debilitating and disfiguring disease, which frequently leads to social margination. Podoconiosis is totally preventable and, once a diagnosis is established, it may improve with simple therapeutic measures. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

  6. Current trends in medical ethics education in Japanese medical schools.

    Science.gov (United States)

    Kurosu, Mitsuyasu

    2012-09-01

    The Japanese medical education program has radically improved during the last 10 years. In 1999, the Task Force Committee on Innovation of Medical Education for the 21st Century proposed a tutorial education system, a core curriculum, and a medical student evaluation system for clinical clerkship. In 2001, the Model Core Curriculum of medical education was instituted, in which medical ethics became part of the core material. Since 2005, a nationwide medical student evaluation system has been applied for entrance to clinical clerkship. Within the Japan Society for Medical Education, the Working Group of Medical Ethics proposed a medical ethics education curriculum in 2001. In line with this, the Japanese Association for Philosophical and Ethical Research in Medicine has begun to address the standardization of the curriculum of medical ethics. A medical philosophy curriculum should also be included in considering illness, health, life, death, the body, and human welfare.

  7. Public Libraries in postindustrial societies

    DEFF Research Database (Denmark)

    Elbeshausen, Hans

    2015-01-01

    The article’s focus is on how public libraries are affected by structural changes in the wake of the transition to the knowledge society. Their attempts to match the knowledge society are illustrated by processes of sensemaking and sensegiving made in public libraries in Canada, the UK and Denmark....

  8. The governance of cooperative societies

    Directory of Open Access Journals (Sweden)

    Yaiza Juanes Sobradillo

    2005-12-01

    Full Text Available The present work aims to expose the appropriate legislation for cooperative societies to which Article 129 of the Spanish Constitution refers, deepen the analysis of the organs of management and control based on the Spanish and Basque Laws on Cooperatives and the Statute for the European Cooperative Societies.

  9. Education for a Learning Society.

    Science.gov (United States)

    Tempero, Howard E., Ed.

    The essays contained in this booklet are 1) "Education for a 'Learning Society': The Challenge" by Ernest Bayles in which he calls for focus on learning to live, developing skills of reflection and judgment applicable to vital issues, and reflective teaching; 2) "Teacher Education in a Learning Society" in which David Turney demands teacher…

  10. Education in the Information Society

    Directory of Open Access Journals (Sweden)

    Octavia-Luciana Porumbeanu

    2007-01-01

    Full Text Available This article approaches the fundamental role which education has in the information society. The continuous evolution of information and communication technologies requires that all citizens have the necessary skills have to use these technologies and to access information for efficient individual functioning in the information society. In this context, the information literacy programmes have a growing importance.

  11. Nursing in a postemotional society.

    Science.gov (United States)

    Herdman, Elizabeth A

    2004-07-01

    Globalization is often seen as the final stage in the transition towards a market economy. It is argued that a side-effect of globalization is cultural homogeneity and loss of life world, or 'McDonaldization'. McDonaldization represents the rationalization of society in the quest for extreme efficiency. More recently, Mestrović has argued that the rationalization of emotions has also occurred and that Western societies are entering a postemotional phase. In postemotional societies there has been a separation of emotion from action. The result is synthetic, manufactured emotions manipulated and standardized for mass consumption. In this paper I explore what it means to nurse in a 'postemotional society' and what impact this dulling of the emotions has had on a profession that locates 'care' as its central defining concept. My aim is to generate critical discussion of the shape and direction of contemporary society and the role of nursing within it.

  12. Privacy and the Connected Society

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Khajuria, Samant; Skouby, Knud Erik

    The Vision of the 5G enabled connected society is highly based on the evolution and implementation of Internet of Things. This involves, amongst others, a significant raise in devices, sensors and communication in pervasive interconnections as well as cooperation amongst devices and entities across...... the society. Enabling the vision of the connected society, researchers point in the direction of security and privacy as areas to challenge the vision. By use of the Internet of Things reference model as well as the vision of the connected society, this paper identifies privacy of the individual with respect...... to three selected areas: Shopping, connected cars and online gaming. The paper concludes that privacy is a complexity within the connected society vision and that thee is a need for more privacy use cases to shed light on the challenge....

  13. What is the Knowledge Society?

    Directory of Open Access Journals (Sweden)

    Marin Dinu

    2008-02-01

    Full Text Available This study sets out to establish conceptual delimitations, more concordant to the theoretical acquisitions with regard to the knowledge society. The author considers it opportune to situate in the center of the definition of the concept of knowledge society the problem of prevalence in the typology of resources. Thus, the knowledge society appears as a form of organization in which scientific knowledge predominates, be that informatics as well. The concordances of essence are discovered through the discerning of the functional relationship knowledge society – global society. In the spectrum of meanings specific to this highway of post-postmodernist configuration of the world, the priorities of the project of the second modernity – the paradigmatic matrix of globalization – are approached. In fact, the study argues in favor of refocusing globalization on the humane, on its distinctive values which substantiate and lend sense to the evolutions of the world. Postreferentiality is the rational expression of humanity coming back to itself.

  14. Radiation Exposure from Medical Exams and Procedures

    Science.gov (United States)

    Fact Sheet Adopted: January 2010 Health Physics Society Specialists in Radiation Safety Radiation Exposure from Medical Exams and Procedures Ionizing radiation is used daily in hospitals and clinics ...

  15. [The activities of the Russian Society of Red Cross during the First World War].

    Science.gov (United States)

    Gorelova, L Ye; Rudoiy, N A

    2013-01-01

    During the First World War, the Russian Society of Red Cross used experience of previous wars expanded its activities. The medical service functioned in the conditions of cruel war. For the first time in history, the weapon of mass destruction was applied The merit of the Russian society of Red Cross was development of specialized medical care.

  16. Mineralogy and characterization of deposited particles of the aero sediments collected in the vicinity of power plants and the open pit coal mine: Kolubara (Serbia).

    Science.gov (United States)

    Cvetković, Željko; Logar, Mihovil; Rosić, Aleksandra

    2013-05-01

    In this paper, particular attention was paid to the presence of aerosol solid particles, which occurred mainly as a result of exploitation and coal combustion in the thermal power plants of the Kolubara basin. Not all of the particles created by this type of anthropogenic pollution have an equal impact on human health, but it largely depends on their size and shape. The mineralogical composition and particle size distribution in the samples of aero sediments were defined. The samples were collected close to the power plant and open pit coal mine, in the winter and summer period during the year 2007. The sampling was performed by using precipitators placed in eight locations within the territory of the Lazarevac municipality. In order to characterize the sedimentary particles, several methods were applied: microscopy, SEM-EDX and X-ray powder diffraction. The concentration of aero sediments was also determined during the test period. Variety in the mineralogical composition and particle size depends on the position of the measuring sites, geology of the locations, the annual period of collecting as well as possible interactions. By applying the mentioned methods, the presence of inhalational and respiratory particles variously distributed in the winter and in the summer period was established. The most common minerals are quartz and feldspar. The presence of gypsum, clay minerals, calcite and dolomite as secondary minerals was determined, as well as the participation of organic and inorganic amorphic matter. The presence of quartz as a toxic mineral has a particular impact on human health.

  17. Society for Academic Emergency Medicine Statement on Plagiarism.

    Science.gov (United States)

    Asher, Shellie L; Iserson, Kenneth V; Merck, Lisa H

    2017-10-01

    The integrity of the research enterprise is of the utmost importance for the advancement of safe and effective medical practice for patients and for maintaining the public trust in health care. Academic societies and editors of journals are key participants in guarding scientific integrity. Avoiding and preventing plagiarism helps to preserve the scientific integrity of professional presentations and publications. The Society for Academic Emergency Medicine (SAEM) Ethics Committee discusses current issues in scientific publishing integrity and provides a guideline to avoid plagiarism in SAEM presentations and publications. © 2017 by the Society for Academic Emergency Medicine.

  18. Education in an Information Society

    Science.gov (United States)

    Moore, John W.

    1999-04-01

    Last month's editorial pointed out that higher education may well change significantly as a result of the tremendous impact that information technologies are having on society. It quoted a white paper (1) by Russell Edgerton, Director of the Education Program of the Pew Charitable Trusts. Edgerton argued that higher education is currently failing to meet three challenges: to provide higher quality education; to reduce costs; and to regain its former stature as an important player in shaping public policy. Edgerton recommended that the Pew Trusts should encourage colleges and universities to set more ambitious goals for undergraduate education, to enter the public arena and play a major role in the reform of K-12 education, and to develop an academic profession interested in working toward these goals. Four new aims for undergraduate education were identified: "encouraging institutions to take learning seriously, encouraging faculty to take pedagogy seriously, demonstrating that technology can be used to reduce costs as well as to enhance learning, and developing new incentives for continuous quality improvement." One wonders why institutions of higher education should need to be encouraged toward goals that seem obviously congruent with their mission and self interest, but today's colleges and universities seem more likely to respond to outside offers of funding than to develop their own plans of action. As members of the faculty of such institutions, it behooves us to consider what some of those outside influences are likely to be and what effects they are likely to have on us, on our institutions, and on our students. Higher education is seen as a growth market by Michael Dolence and Donald Norris (2). In 1995 they projected that in five years there would be an increase of 20 million full-time equivalent enrollments in the U.S. and more than 100 million world wide. However, this growth was not projected to be traditional, on-campus students. Most was expected to

  19. October 2012 Arizona thoracic society notes

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2012-10-01

    Full Text Available No abstract available. Article truncated at 150 words. A dinner meeting was held on 10/24/2012 at Scottsdale Shea beginning at 6:30 PM. There were 23 in attendance representing the pulmonary, critical care, sleep, infectious disease, pathology, and radiology communities. An announcement was made that the Colorado Thoracic Society has accepted an invitation to partner with the Arizona and New Mexico Thoracic Societies in the Southwest Journal of Pulmonary and Critical Care Medicine. Discussions continue to be held regarding a combined Arizona Thoracic Society meeting with Tucson either in Casa Grande or electronically. Six cases were presented: Dr. Tim Kuberski, chief of Infectious Disease at Maricopa Medical Center, presented a 48 year old female who had been ill for 2 weeks. A CT of the chest revealed a left lower lobe nodule and a CT of the abdomen showed hydronephrosis and a pelvic mass. Carcinoembryonic antigen (CEA was elevated. All turned out to be coccidioidomycosis on biopsy. CEA decreased …

  20. A history of the American Society for Clinical Investigation

    Science.gov (United States)

    Howell, Joel D.

    2009-01-01

    One hundred years ago, in 1909, the American Society for Clinical Investigation (ASCI) held its first annual meeting. The founding members based this new society on a revolutionary approach to research that emphasized newer physiological methods. In 1924 the ASCI started a new journal, the Journal of Clinical Investigation. The ASCI has also held an annual meeting almost every year. The society has long debated who could be a member, with discussions about whether members must be physicians, what sorts of research they could do, and the role of women within the society. The ASCI has also grappled with what else the society should do, especially whether it ought to take a stand on policy issues. ASCI history has reflected changing social, political, and economic contexts, including several wars, concerns about the ethics of biomedical research, massive increases in federal research funding, and an increasingly large and specialized medical environment. PMID:19348041

  1. Journal of Ethiopian Medical Practice

    African Journals Online (AJOL)

    Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. Journal Homepage Image. A biannual scientific journal published by the Ethiopian Society of General Medical Practice ...

  2. Science in Society in Europe

    DEFF Research Database (Denmark)

    Mejlgaard, Niels; Bloch, Carter Walter

    2012-01-01

    This paper introduces a special section of Science and Public Policy on science in society in Europe. Based on extensive data collected for the Monitoring Policy and Research Activities on Science in Society in Europe (MASIS) project, contributions to this special section explore pertinent issues...... related to the location, role and responsibility of science across EU member states and associated countries. By developing analytical typologies and classifying countries, the collection of papers provides a novel and detailed picture of Europe. It reveals considerable variation regarding...... the interactions of science and society at the national level, and it offers a platform for international learning. The identification of patterns and trends concerning the place of science in society may also feed into emerging European discussions about ‘responsible research and innovation’....

  3. Heart Failure Society of America

    Science.gov (United States)

    ... MACRA Resource Portal The Heart Failure Society of America, Inc. (HFSA) represents the first organized effort by heart failure experts from the Americas to provide a forum for all those interested ...

  4. American Head and Neck Society

    Science.gov (United States)

    ... research and insights. Comments This field is for validation purposes and should be left unchanged. This iframe ... and Announcements Copyright ©2016 · American Head and Neck Society · Privacy and Return Policy Managed by BSC Management, ...

  5. Risk society and amoral morality

    Directory of Open Access Journals (Sweden)

    Nedeljković Radica M.

    2017-01-01

    Full Text Available The modern world is the world of change. Modernity changed all aspects of life in width and depth. The changes are so fast and so many people have impression that they are trapped in a multitude of events that they cannot understand nor control. Instead of society as a system, we are talking about society as a network of different relationships of individuals and social groups. Instead of a harmonious society as a space in which the man resides, developing their potential and needs, we are talking about society as a threatening force that destroys everything in its way as 'Moloch' (Giddens, the 'risk society' (Beck in which the doctrine produced in equal measure the conditions for prosperity, but also the risks and destruction; the simulation of society (Baudrillard which glorifies lies and deceit. Instead of society as a community, we are talking about the disappearance of society (Popper. Can we, therefore, rationally understand and express the world, the world of modernity; this world of profound change resembles the maze in which we are lost and wandering without meaning? Starting with Ulrich Beck and his theory of the risk society, the author points out that the way in which the western civilization started, which is imposed as a mandatory form for the rest of the world, leads to amoral morality. The ideology of progress, which is irrational and without a clear vision and clearly defined values, pushes us into an uncertain future of numerous risks and ever growing individualism. Thus we come to the conviction that without common values, collective values, we are lost in this world of risk. Solidarity and trust are the key values for the stable community, but they are non-existent in the risk society dominated by individualism. In the period of uncertainty in the risk society, only religion provides a healthy basis for communal living. Therefore, the way out of the crisis is not in politics, which is placed at the service of the economy, but

  6. Finnish Society of Soil Sciences

    Science.gov (United States)

    Rankinen, Katri; Hänninen, Pekka; Soinne, Helena; Leppälammi-Kujansuu, Jaana; Salo, Tapio; Pennanen, Taina

    2017-04-01

    In 1998 the organization of the International Union of Soil Sciences (IUSS) was renewed to better support national activities. That was also the new start in the operation of the Finnish Society of Soil Sciences, which became affiliated to the IUSS. The society was originally established in 1971 but it remained relatively inactive. Currently, there are around 200 members in the Finnish Society of Soil Sciences. The members of the executive board cover different fields of soil science from geology to microbiology. Mission statement of the society is to promote the soil sciences and their application in Finland, to act as a forum for creation of better links between soil scientists, interested end users and the public, and to promote distribution and appreciation of general and Finnish research findings in soil science. Every second year the society organizes a national two-day long conference. In 2017 the theme 'circular economy' collected all together 57 presentations. The members of the incoming student division carried responsibility in practical co-ordination committee, acting also as session chairs. In the intervening years the society organizes a weekend excursion to neighboring areas. Lately we have explored the use of biochar in landscaping of Stockholm.

  7. Abortion in a just society.

    Science.gov (United States)

    Hunt, M E

    1993-01-01

    A female Catholic theologian imagines a just society that does not judge women who decide to undergo an abortion. The Church, practitioners, and the courts must trust that women do make person-enhancing choices about the quality of life. In the last 15 years most progress in securing a woman's right to abortion has been limited to white, well-educated, and middle or upper middle class women. A just society would consider reproductive options a human right. Abortion providers are examples of a move to a just society; they are committed to women's well-being. There are some facts that make one pessimistic about achieving abortion in a just society. The US Supreme Court plans to review important decisions establishing abortion as a civil right. Further, some men insist on suing women who want to make their own reproductive decisions--an anti-choice tactic to wear away women's right to reproductive choice. Bombings of abortion clinics and harassment campaigns by anti-choice groups are common. These behaviors strain pro-choice proponents emotionally, psychically, and spiritually. Their tactics often lead to theologians practicing self-censorship because they fear backlash. Abortion providers also do this. Further, the reaction to AIDS is that sex is bad. Anti-abortion groups use AIDS to further their campaigns, claiming that AIDS is a punishment for sex. Strategies working towards abortion in a just society should be education and persuasion of policymakers and citizens about women's right to choose, since they are the ones most affected by abortion. Moreover, only women can secure their rights to abortion. In a just society, every health maintenance organization, insurance company, and group practice would consider abortion a normal service. A just society provides for the survival needs of the most marginalized.

  8. Evolving society and mental health

    Directory of Open Access Journals (Sweden)

    Dipesh Bhagabati

    2016-07-01

    Full Text Available Numerous issues related to culture, occupation, gender, caste, and health, to name a few, have faced harshness of society from time immemorial. Reasons are debatable, ranging from somewhat understandable to completely unacceptable. There is no doubt that society is dynamic and it has changed its view on many of the issues with passing time. Mental health is one such issue which society has neglected for quite a long time. Even today, mental health and mentally ill people face stigma and discrimination in their family, society, and at their workplace. People do not feel comfortable talking about mental health, even if they know that there cannot be any health without a healthy mind. But, as Albert Einstein has said “learn from yesterday, live for today, and hope for tomorrow”, everything is not lost. The mentally ill patients who were once abandoned and left on their own have now started to get humane care and attention. This article discusses this very pertinent topic of changing society and mental health.

  9. 40. annual convention 1990 of the Austrian physical society

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    Titles and abstracts of the 1990 Convention of the Austrian Physical Society, 17-21 September 1990 at Salzburg, Austria, are given. The topical sections are: 1. Atomic, Molecular- and Plasma Physics; 2. Solid State Physics; 3. Polymer Physics; 4. Nuclear- and Particle Physics; 5. Medical Physics and Biophysics. There are alltogether 193 contributions, 61 thereof of INIS interest

  10. IX Congress of Spanish radiation protection Society (Bilbao, May-2002)

    International Nuclear Information System (INIS)

    2002-01-01

    The present book contains the papers presented to the IX Congress of Spanish Radiation Protection Society. The main sessions were : 1.- Scientific area of Radiation Protection and Regulation, Social aspects, Radioactive waste management and Dismantling. 2.- Radiation protection in Medical applications. 3.- Physics of radiations and their measurements

  11. What is a medical physicist?

    International Nuclear Information System (INIS)

    Endo, Masahiro

    2011-01-01

    The modern radiotherapy requires a medical physicist who optimizes treatment plans, assures delivered dose equal to prescription, and performs QA (quality assurance) of radiotherapy equipments. However, medical physicist has not been established as a medical profession in Japan mainly because importance of radiotherapy was not sufficiently recognized until recently. Between 2000 and 2004, several accidents of radiotherapy including hundreds of patients were found and these accidents were mainly caused by lack of QA. The necessity and importance of medical physicist were recognized by these accidents as well as by the advent of high-precision radiotherapy such as IMRT (intensity modulation radiation therapy). JRS (Japan Radiological Society) that certified medical physicists with the help of JSMP (Japan Society of Medical Physics), decided to extend eligibility in order to increase certified medical physicists rapidly in 2003. After the decision certified medical physicists were rapidly increased in number. The government supports this tendency to enact that certified medical physicists is necessary to reimbursement for high-precision therapy. It also started to supply grants for medical physics training in physical and health science graduate schools. In this program several universities have started medical physics course in their graduate schools. If these movements continue, medical physicist will be established as a medical profession in the near future. (author)

  12. Information Era. Conscience Society. Creativity

    Directory of Open Access Journals (Sweden)

    Dumitru TODOROI

    2011-01-01

    Full Text Available ttendees will learn about the research and development which will be effected by scientists in the branch of Conscience Society creation in next decades of XXI century. Conscience is usually seen as linked to a morality inherent in all humans, to a beneficent universe and/or to divinity. It is increasingly conceived of as applying to the world as a whole and as a main feature of conscience society. It has motivated its numerous models, characteristics and functions of Conscience for creation the societal intelligent adaptable information systems in Conscience Society. The moral life is a vital part for the world to maintain a Conscience (civilized Society, so always keep in mind to: accept differences in others; respond promptly to others; leave some "free" time; care about others as if they were you; treat everyone similarly; never engage in violent acts; have an inner sense of thankfulness; have a sense of commitment. Creativity is a result of brain activity which differentiates individuals and could ensure an important competitive advantage for persons, for companies, for Society in general, and for Conscience Society in special. Very innovative branches – like software industry, computer industry, car industry – consider creativity as the key of business success. Natural Intelligence’ Creativity can develop basic creative activities, but Artificial Intelligence’ Creativity, and, especially, Conscience Intelligence’ Creativity should be developed and they could be enhanced over the level of Natural Intelligence. The basic idea for present communication represent the research results communicated at the last two annual AESM conferences [1] [2].

  13. American Cancer Society/American Society of Clinical Oncology Breast Cancer Survivorship Care Guideline.

    Science.gov (United States)

    Runowicz, Carolyn D; Leach, Corinne R; Henry, N Lynn; Henry, Karen S; Mackey, Heather T; Cowens-Alvarado, Rebecca L; Cannady, Rachel S; Pratt-Chapman, Mandi L; Edge, Stephen B; Jacobs, Linda A; Hurria, Arti; Marks, Lawrence B; LaMonte, Samuel J; Warner, Ellen; Lyman, Gary H; Ganz, Patricia A

    2016-02-20

    The purpose of the American Cancer Society/American Society of Clinical Oncology Breast Cancer Survivorship Care Guideline is to provide recommendations to assist primary care and other clinicians in the care of female adult survivors of breast cancer. A systematic review of the literature was conducted using PubMed through April 2015. A multidisciplinary expert workgroup with expertise in primary care, gynecology, surgical oncology, medical oncology, radiation oncology, and nursing was formed and tasked with drafting the Breast Cancer Survivorship Care Guideline. A total of 1,073 articles met inclusion criteria; and, after full text review, 237 were included as the evidence base. Patients should undergo regular surveillance for breast cancer recurrence, including evaluation with a cancer-related history and physical examination, and should be screened for new primary breast cancer. Data do not support performing routine laboratory tests or imaging tests in asymptomatic patients to evaluate for breast cancer recurrence. Primary care clinicians should counsel patients about the importance of maintaining a healthy lifestyle, monitor for post-treatment symptoms that can adversely affect quality of life, and monitor for adherence to endocrine therapy. Recommendations provided in this guideline are based on current evidence in the literature and expert consensus opinion. Most of the evidence is not sufficient to warrant a strong evidence-based recommendation. Recommendations on surveillance for breast cancer recurrence, screening for second primary cancers, assessment and management of physical and psychosocial long-term and late effects of breast cancer and its treatment, health promotion, and care coordination/practice implications are made.This guideline was developed through a collaboration between the American Cancer Society and the American Society of Clinical Oncology and has been published jointly by invitation and consent in both CA: A Cancer Journal for

  14. American Society for Dermatologic Surgery

    Science.gov (United States)

    ... medical attendees. Your input is critical to future programming as we plan the 2018 ASDS Annual Meeting, ... 2017 recipients were Murad Alam, MD, MBA; Seemal R. Desai, MD; Jeffrey S. Dover, MD; George J. Hruza, ...

  15. Emphasizing humanities in medical education: Promoting the integration of medical scientific spirit and medical humanistic spirit.

    Science.gov (United States)

    Song, Peipei; Tang, Wei

    2017-05-23

    In the era of the biological-psychological-social medicine model, an ideal of modern medicine is to enhance the humanities in medical education, to foster medical talents with humanistic spirit, and to promote the integration of scientific spirit and humanistic spirit in medicine. Throughout the United States (US), United Kingdom (UK), other Western countries, and some Asian countries like Japan, many medical universities have already integrated the learning of medical humanities in their curricula and recognized their value. While in China, although medical education reform over the past decade has emphasized the topic of medical humanities to increase the professionalism of future physicians, the integration of medical humanity courses in medical universities has lagged behind the pace in Western countries. In addition, current courses in medical humanities were arbitrarily established due to a lack of organizational independence. For various reasons like a shortage of instructors, medical universities have failed to pay sufficient attention to medical humanities education given the urgent needs of society. The medical problems in contemporary Chinese society are not solely the purview of biomedical technology; what matters more is enhancing the humanities in medical education and fostering medical talents with humanistic spirit. Emphasizing the humanities in medical education and promoting the integration of medical scientific spirit and medical humanistic spirit have become one of the most pressing issues China must address. Greater attention should be paid to reasonable integration of humanities into the medical curriculum, creation of medical courses related to humanities and optimization of the curriculum, and actively allocating abundant teaching resources and exploring better methods of instruction.

  16. Shapes of a Renewable Society.

    Science.gov (United States)

    Deudney, Daniel; Flavin, Christopher

    1983-01-01

    To rely on coal and nuclear power as sources of energy is to narrow society's future options and to present numerous problems. Renewable solar energy, on the other hand, can preserve rather than reduce options. More jobs, rising self-reliance, and new equalities between nations will be the result. (RM)

  17. Governance and European Civil Society

    DEFF Research Database (Denmark)

    Kutay, Acar

    This book provides a critical analysis of the European Union’s approach to ‘governance’, focusing on the way in which civil society is incorporated within the EU decision-making process and arguing that it is not conducive to the democratisation of EU governance.\

  18. Credentialism in Our Ignorant Society.

    Science.gov (United States)

    Marien, Michael

    All societies have procedures for selecting who will occupy important positions. The use of credentials characterizes our system of social selection, and our worship of them has created the following problems: an artificial demand for education, artificial restraints to learning, the overlooking of obsolescence, generational inversion (wherein the…

  19. Science in the Information Society

    CERN Document Server

    2003-01-01

    CERN will host the Role of Science in the Information Society (RSIS) conference on Monday and Tuesday, focusing on how science-driven information and communication technologies can help close the digital divide. There will be an army of bodyguards at CERN at the beginning of December. CERN will not only host the official visits, but also around 500 scientists, politicians, and members of civil society who will descend on the Main Auditorium for the Role of Science in the Information Society (RSIS) conference on 8-9 December. The RSIS conference hosted by CERN is a high-profile event focusing on how to make information technologies work for the greatest human benefit - a marked change from keeping a relatively low profile so far, making its discoveries available to all with little input in how they are applied. The RSIS, held 8-9 December at CERN, will be a Summit Event of the World Summit on the Information Society taking place at Palexpo on 9-13 December. RSIS participants will apply a scientific point of...

  20. Architecture in the network society

    DEFF Research Database (Denmark)

    2004-01-01

    Under the theme Architecture in the Network Society, participants were invited to focus on the dialog and sharing of knowledge between architects and other disciplines and to reflect on, and propose, new methods in the design process, to enhance and improve the impact of information technology...

  1. Adult Learning, Economy and Society

    DEFF Research Database (Denmark)

    Olesen, Henning Salling

    2010-01-01

    The article relates the different types of adult education, continuing education and training to an overall societal context of socio-economic modernization by focussing on the multiple functions of adult learning. Each of well known empirical categories is seen in its historical relation to mode...... embracing form which set a new framework for human participation in the new global society....

  2. Experts in science and society

    CERN Document Server

    Gigerenzer, Gerd

    2004-01-01

    In today's complex world, we have come to rely increasingly on those who have expertise in specific areas and can bring their knowledge to bear on crucial social, political and scientific questions. Taking the viewpoint that experts are consulted when there is something important at stake for an individual, a group, or society at large, Experts in Science and Society explores expertise as a relational concept. How do experts balance their commitment to science with that to society? How does a society actually determine that a person has expertise? What personal traits are valued in an expert? From where does the expert derive authority? What makes new forms of expertise emerge? These and related questions are addressed from a wide range of areas in order to be inclusive, as well as to demonstrate similarities across areas. Likewise, in order to be culturally comparative, this volume includes examples and discussions of experts in different countries and even in different time periods. The topics include the r...

  3. Internal Conflicts in Muslim Societies

    Directory of Open Access Journals (Sweden)

    Ashiq Ali Shah

    2001-12-01

    Full Text Available An analysis of psychological theories and the social dynamics of the society help identify salient attributes and processes relevant to conflict among Muslims. The psychodynamic concept of personality and frustration-aggression hypothesis account for the socialization practices in the Muslim societies, emotional instability, unfavorable evaluation of those holding a different viewpoint and venting out one's aggression on the weaker. The tendency of the Muslims to praise their sect/tribe/religious group leads to a groupthink situation that polarizes intergroup relationships. The acts of categorization in group and out group, as postulated by the social identity theory, contribute towards the distorted perception of each other. The Islamic notions of brotherhood, unity and ethnic identity as means of personal identification and social interaction seems to have been forgotten by the Muslims. Though the Western social-psychological constructs are helpful in understanding the causes of conflict among Muslims, they are not germane to Muslim societies. The group belongingness and group favouritism is not necessarily a tool of discrimination and conflict but is an essential component of one's survival in a collectivist society. The Western theories also do not address the economic and political circumstances responsible for the multitude of conflicts among Muslims.

  4. Marketing and Society. Study Guide.

    Science.gov (United States)

    Welsh, Robert S.; Blake, Rowland S.

    This self-instructional study guide is part of the materials for a college-level programmed course entitled "Marketing and Society." The study guide is intended for use by students in conjunction with a related textbook, a workbook, a review guide, and a series of instructional tape casettes. The study guide contains a brief introductory section…

  5. Sexism in modern American society

    Directory of Open Access Journals (Sweden)

    Ibraeva B. M.

    2016-12-01

    Full Text Available the authors of the article consider that modern life is still full of various stereotypes. One of the most controversial questions in this article is the issue of discrimination against women in contemporary American society, and it is hard to believe, because this country claims to be a main guarantor of the human rights and freedoms.

  6. Real-time analysis of ambient organic aerosols using aerosol flowing atmospheric-pressure afterglow mass spectrometry (AeroFAPA-MS)

    Science.gov (United States)

    Brüggemann, Martin; Karu, Einar; Stelzer, Torsten; Hoffmann, Thorsten

    2015-04-01

    Organic aerosol accounts for a major fraction of atmospheric aerosols and has implications on the earth's climate and human health. However, due to the chemical complexity its measurement remains a major challenge for analytical instrumentation.1 Here, we present the development, characterization and application of a new soft ionization technique that allows mass spectrometric real-time detection of organic compounds in ambient aerosols. The aerosol flowing atmospheric-pressure afterglow (AeroFAPA) ion source utilizes a helium glow discharge plasma to produce excited helium species and primary reagent ions. Ionization of the analytes occurs in the afterglow region after thermal desorption and results mainly in intact molecular ions, facilitating the interpretation of the acquired mass spectra. In the past, similar approaches were used to detect pesticides, explosives or illicit drugs on a variety of surfaces.2,3 In contrast, the AeroFAPA source operates 'online' and allows the detection of organic compounds in aerosols without a prior precipitation or sampling step. To our knowledge, this is the first application of an atmospheric-pressure glow discharge ionization technique to ambient aerosol samples. We illustrate that changes in aerosol composition and concentration are detected on the time scale of seconds and in the ng-m-3 range. Additionally, the successful application of AeroFAPA-MS during a field study in a mixed forest region in Central Europe is presented. Several oxidation products of monoterpenes were clearly identified using the possibility to perform tandem MS experiments. The acquired data are in agreement with previous studies and demonstrate that AeroFAPA-MS is a suitable tool for organic aerosol analysis. Furthermore, these results reveal the potential of this technique to enable new insights into aerosol formation, growth and transformation in the atmosphere. References: 1) IPCC, 2013: Summary for Policymakers. In: Climate Change 2013: The

  7. Parallelization of the unstructured Navier-stoke solver LILAC for the aero-thermal analysis of a gas-cooled reactor

    International Nuclear Information System (INIS)

    Kim, J. T.; Kim, S. B.; Lee, W. J.

    2004-01-01

    Currently lilac code is under development to analyse thermo-hydraulics of the gas-cooled reactor(GCR) especially high-temperature GCR which is one of the gen IV nuclear reactors. The lilac code was originally developed for the analysis of thermo-hydraulics in a molten pool. And now it is modified to resolve the compressible gas flows in the GCR. The more complexities in the internal flow geometries of the GCR reactor and aero-thermal flows, the number of computational cells are increased and finally exceeds the current computing powers of the desktop computers. To overcome the problem and well resolve the interesting physics in the GCR it is conducted to parallels the lilac code by the decomposition of a computational domain or grid. Some benchmark problems are solved with the parallelized lilac code and its speed-up characteristics by the parallel computation is evaluated and described in the article

  8. Futurepath: The Story of Research and Technology at NASA Lewis Research Center. Structures for Flight Propulsion, ARC Sprayed Monotape, National Aero-Space Plane

    Science.gov (United States)

    1989-01-01

    The story of research and technology at NASA Lewis Research Center's Structures Division is presented. The job and designs of the Structures Division needed for flight propulsion is described including structural mechanics, structural dynamics, fatigue, and fracture. The video briefly explains why properties of metals used in structural mechanics need to be tested. Examples of tests and simulations used in structural dynamics (bodies in motion) are briefly described. Destructive and non-destructive fatigue/fracture analysis is also described. The arc sprayed monotape (a composite material) is explained, as are the programs in which monotape plays a roll. Finally, the National Aero-Space Plane (NASP or x-30) is introduced, including the material development and metal matrix as well as how NASP will reduce costs for NASA.

  9. Results from the ASPIRE study for breast reconstruction utilizing the AeroForm™ patient controlled carbon dioxide-inflated tissue expanders.

    Science.gov (United States)

    Connell, Tony F

    2015-09-01

    Therapeutic or prophylactic mastectomy is often indicated for women with breast cancer, or for those at a high risk of developing cancer due to familial history or genetic mutations. Favorable aesthetic and psychological results make prosthetic reconstruction of the breast with placement of tissue expanders followed by permanent implant a popular choice for women diagnosed with breast cancer. This study describes the results of the ASPIRE trial, the objective of which was to provide supportive data to demonstrate the performance and safety of the AeroForm™ System in a population with broader selection criteria than previous studies. Results of the earlier PACE clinical studies (PACE 1 and 2) demonstrated that the AeroForm™ System could be used safely and effectively to achieve the desired expansion necessary for successful breast reconstruction. In the current ASPIRE trial described in the paper, performance of the device was evaluated by successful tissue expansion and exchange to breast implant(s) unless precluded by a non-device related event. Safety data was evaluated based on reported adverse events. A prospective, single center, open-label study in which subjects who met the inclusion criteria and agreed to participate were enrolled and implanted with the AeroForm expander either at the time of mastectomy (immediate) or sometime after mastectomy (delayed). In the event of a bilateral procedure, the expander was implanted in each side. Subjects were followed until the explant of the tissue expander(s) and exchange for silicone or saline breast implant(s). Thirty-four expanders were placed in 21 subjects in the clinical trial; the average age of subjects was 49.7 ± 8.6 years with average BMI of 26.1 ± 4.7. Bilateral procedures accounted for 62% of the total and 88% of the reconstructions were completed with a latissimus dorsi flap (anterior approach) per the investigators standard procedure. Four (12%) of the cases (12%) were completed in two subjects

  10. New aero-gravity results from the Arctic: Linking the latest Cretaceous-early Cenozoic plate kinematics of the North Atlantic and Arctic Ocean

    DEFF Research Database (Denmark)

    Døssing, Arne; Hopper, J.R.; Olesen, Arne Vestergaard

    2013-01-01

    The tectonic history of the Arctic Ocean remains poorly resolved and highly controversial. Details regarding break up of the Lomonosov Ridge from the Barents-Kara shelf margins and the establishment of seafloor spreading in the Cenozoic Eurasia Basin are unresolved. Significantly, the plate...... tectonic evolution of the Mesozoic Amerasia Basin is essentially unknown. The Arctic Ocean north of Greenland is at a critical juncture that formed at the locus of a Mesozoic three-plate setting between the Lomonosov Ridge, Greenland, and North America. In addition, the area is close to the European plate...... plateau against an important fault zone north of Greenland. Our results provide new constraints for Cretaceous-Cenozoic plate reconstructions of the Arctic. Key Points Presentation of the largest aero-gravity survey acquired over the Arctic Ocean Plate tectonic link between Atlantic and Arctic spreading...

  11. Views from the Japan health physics society

    International Nuclear Information System (INIS)

    Mizushita, S.

    2004-01-01

    The Japan Health Physics Society set an ad hoc working group (hereinafter 'the Working Group') to investigate the proposals presented by Professor Roger Clarke, chairman of the ICRP, 111 1999 towards new ICRP recommendations, and to make suggestions from the standpoint as an academic society for radiological protection in Japan. The Working Group discussed the present situation of the system of radiation protection and the ICRP Proposals with regard to the items oh definition of dose, health effect of radiation, dose and dose level, category of exposure, optimisation and role of stakeholder, collective dose, exclusion and exemption, and medical exposure. The basic policy of the Working Group is that the philosophy and criteria of the system of radiation protection, which are now effectively used for relevant regulations or some other purposes and are functioning well, should be basically retained unless there are positive reasons for revising them on specific; grounds. The ICRP Proposals, an individual-oriented radiation protection concept, should basically be coherent with present protection system, a societal-oriented radiation protection concept, and should have enough rational scientific grounds. The Working Group: (1) suggests there is a need for scientific rationality in any newly introduced criteria or standards for the system of radiation protection; (2) understands, for the present, that there is no other option but to adopt the linear no-threshold (LNT) hypothesis relating dose and risk of health effects at low level radiation exposures. This is the precautionary principle as applied to radiological protection; (3) recommends the role of stakeholders be explained as an example of one of the steps in the optimisation process; (4) suggests protective action level or dose limits should he related to radiation risk, even though these levels indicate only when to begin considering protective actions; and (5) believes that establishing a system of radiation

  12. Environmental Assessment for Conversion of the Existing Aero Club Runway to Emergency Helipad for David Grant Medical Center Travis Air Force Base, Fairfield, California

    Science.gov (United States)

    2010-07-01

    FT Potential Ambystoma californiense California tiger salamander FT Known Branchinecta conservatio Conservancy fairy shrimp FE Potential Elaphrus...elderberry longhorn beetle FT Potential Branchinecta lynchi Vernal pool fairy shrimp FT Known Lepidurus packardi Vernal pool tadpole shrimp FE...Area. During 2008 vernal pool invertebrate monitoring, CTS larvae were discovered in the northeastern part of Travis AFB, in the Castle Terrace

  13. Development process of subjects society

    Directory of Open Access Journals (Sweden)

    A. V. Reshetnichenko

    2014-08-01

    Full Text Available Background due to defining the role of people in the development of society and the almost complete absence of scientific management processes capable of progressive development of both individuals and social communities, and nations, and civilization in general. In order to overcome inherent subjectivist methodology of knowledge, psyholohizatorskyh, hiperpolityzovanyh and utilitarian approach, the authors proposed a three-tier system of business processes of society. The conceptual core of the approach consists in the detection task as logical - mathematical laws of subjects of primary, secondary and higher levels of development, and on the mechanisms of their formation and practice. The solution of the tasks allowed the authors to reveal the structure of both the ascending and descending processes of economic society. Thus, the analysis of individual carriers upward changes as «individual», «individuality», «person» and «personality» showed conditionality determination of their activities with «anthropometric», «ethnic», «demographic» and «ideological» mechanisms. Nature as common carriers downstream changes revealed using correlative related «groups», «group «, «groups» and «communities» whose activity is due to «vitalistic», «education», «professional» and «stratification» mechanisms. To disclose the nature and organization of secondary and higher levels of economic society by the authors introduced the category of «citizen», «heneralista», «human space», «human galactic» ‘formation and development is causing «status», «Persona logical», «humanocentric», «institutional», «cluster», «kontaminatsiyni» and other mechanisms. One of the main achievements of the work, the authors consider the possibility of further development and practical implementation of new quality management processes of economic society based multimodal dialectical logic.

  14. Supernatural in society. (Cho) to shakai

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, S. (Agency of Industrial Science and Technology, Tokyo (Japan))

    1992-10-05

    The technologies prefixed with 'super' have offered the conveniences in the various aspects of the society including the industrial field up to present. Firstly a conception 'super high speed transportation system' has realized the 'supersonic aircraft' and 'ultra super express train', etc. such as a linear motor car, and moreover is developing the 'superconducting propulsive ship' and so forth. In the information oriented society, the information processing speed of computer has made a rapid progress by the development of very high speed large scale integrated circuit etc. In the field of manufacture, there are the magnetic head of video tape recorder and the lens of camera as products close to us manufactured by the 'super precision working.' As for the products adhered closely to ous lives, there are medical equipments, wedling machine, fish detector, etc. utilizing the 'ultrasonic wave', as well as 'supermultistoried building,' etc. Furthermore, turning a loon on the world of culture and art, the activities of the 'surrealism' are giving a substantial effect. It is important that the technology prefixed with 'super' will be let developed, and not only the conveniences, but also the harmony between the human being and nature will be realized in a better form in the future as well.

  15. Risk and society; Risque et societe

    Energy Technology Data Exchange (ETDEWEB)

    Tubiana, M. [Academie des Sciences, 75 - Paris (France)]|[Centre Antoine Beclere, Faculte de medecine, 75 - Paris (France); Vrousos, C.; Pages, J.P. [Centre Hospitalier Universitaire, 38 - Grenoble (France); Carde, C.

    1999-07-01

    This book brings together the communications presented at the colloquium 'risk and society' held in Paris (France) on November 1998. During this colloquium, the various aspects of risk and of its management were discussed by medical specialists, historians, industrialists, engineers, philosophers, lawyers, politicians and administration representatives. The first theme concerns the controversies generated by the development of some activities (genetics, bio-technologies, nuclear and radiations use). The second theme concerns the management of risks and the way to conciliate the point of view of authorities and citizens (confidence of the public with respect to experts, scientists, industrialists, government and administrative representatives, role played by the media). The debates that took place during the colloquium have shown that the public opinion concerning the nuclear activities or the new technologies greatly depends on the ideological attitudes and on the public's likes and dislikes with respect to some categories of actors (distrust with respect to public decisions, fears with respect to changes and future, nostalgia of the past). The following aspects are reviewed: Notions of risk and hazard (risk and health, risk in today's society, medicine and society, the point of view of the industrialists and of the scientific and technical specialists); from the psychological aspects of the risk to its social aspects (survey of the risk assessment battlefield, social attenuation and amplification of risk, the feeling of risks in Europe, insecurity and delinquency, controversies around radioactivity and health); the negotiation and communication about risks (risk and public health, negotiation around risks, risks and information dissemination about the public debate, communication and crisis, evolution of risk communication, comparison between American and European approaches, the Seveso directive); the public debate and the evolution of risks

  16. Risk and society; Risque et societe

    Energy Technology Data Exchange (ETDEWEB)

    Tubiana, M [Academie des Sciences, 75 - Paris (France); [Centre Antoine Beclere, Faculte de medecine, 75 - Paris (France); Vrousos, C; Pages, J P [Centre Hospitalier Universitaire, 38 - Grenoble (France); Carde, C

    1999-07-01

    This book brings together the communications presented at the colloquium 'risk and society' held in Paris (France) on November 1998. During this colloquium, the various aspects of risk and of its management were discussed by medical specialists, historians, industrialists, engineers, philosophers, lawyers, politicians and administration representatives. The first theme concerns the controversies generated by the development of some activities (genetics, bio-technologies, nuclear and radiations use). The second theme concerns the management of risks and the way to conciliate the point of view of authorities and citizens (confidence of the public with respect to experts, scientists, industrialists, government and administrative representatives, role played by the media). The debates that took place during the colloquium have shown that the public opinion concerning the nuclear activities or the new technologies greatly depends on the ideological attitudes and on the public's likes and dislikes with respect to some categories of actors (distrust with respect to public decisions, fears with respect to changes and future, nostalgia of the past). The following aspects are reviewed: Notions of risk and hazard (risk and health, risk in today's society, medicine and society, the point of view of the industrialists and of the scientific and technical specialists); from the psychological aspects of the risk to its social aspects (survey of the risk assessment battlefield, social attenuation and amplification of risk, the feeling of risks in Europe, insecurity and delinquency, controversies around radioactivity and health); the negotiation and communication about risks (risk and public health, negotiation around risks, risks and information dissemination about the public debate, communication and crisis, evolution of risk communication, comparison between American and European approaches, the Seveso directive); the public debate and the evolution of risks management (the

  17. AeroADL: applying the integration of the Suomi-NPP science algorithms with the Algorithm Development Library to the calibration and validation task

    Science.gov (United States)

    Houchin, J. S.

    2014-09-01

    A common problem for the off-line validation of the calibration algorithms and algorithm coefficients is being able to run science data through the exact same software used for on-line calibration of that data. The Joint Polar Satellite System (JPSS) program solved part of this problem by making the Algorithm Development Library (ADL) available, which allows the operational algorithm code to be compiled and run on a desktop Linux workstation using flat file input and output. However, this solved only part of the problem, as the toolkit and methods to initiate the processing of data through the algorithms were geared specifically toward the algorithm developer, not the calibration analyst. In algorithm development mode, a limited number of sets of test data are staged for the algorithm once, and then run through the algorithm over and over as the software is developed and debugged. In calibration analyst mode, we are continually running new data sets through the algorithm, which requires significant effort to stage each of those data sets for the algorithm without additional tools. AeroADL solves this second problem by providing a set of scripts that wrap the ADL tools, providing both efficient means to stage and process an input data set, to override static calibration coefficient look-up-tables (LUT) with experimental versions of those tables, and to manage a library containing multiple versions of each of the static LUT files in such a way that the correct set of LUTs required for each algorithm are automatically provided to the algorithm without analyst effort. Using AeroADL, The Aerospace Corporation's analyst team has demonstrated the ability to quickly and efficiently perform analysis tasks for both the VIIRS and OMPS sensors with minimal training on the software tools.

  18. Solar Tower Experiments for Radiometric Calibration and Validation of Infrared Imaging Assets and Analysis Tools for Entry Aero-Heating Measurements

    Science.gov (United States)

    Splinter, Scott C.; Daryabeigi, Kamran; Horvath, Thomas J.; Mercer, David C.; Ghanbari, Cheryl M.; Ross, Martin N.; Tietjen, Alan; Schwartz, Richard J.

    2008-01-01

    The NASA Engineering and Safety Center sponsored Hypersonic Thermodynamic Infrared Measurements assessment team has a task to perform radiometric calibration and validation of land-based and airborne infrared imaging assets and tools for remote thermographic imaging. The IR assets and tools will be used for thermographic imaging of the Space Shuttle Orbiter during entry aero-heating to provide flight boundary layer transition thermography data that could be utilized for calibration and validation of empirical and theoretical aero-heating tools. A series of tests at the Sandia National Laboratories National Solar Thermal Test Facility were designed for this task where reflected solar radiation from a field of heliostats was used to heat a 4 foot by 4 foot test panel consisting of LI 900 ceramic tiles located on top of the 200 foot tall Solar Tower. The test panel provided an Orbiter-like entry temperature for the purposes of radiometric calibration and validation. The Solar Tower provided an ideal test bed for this series of radiometric calibration and validation tests because it had the potential to rapidly heat the large test panel to spatially uniform and non-uniform elevated temperatures. Also, the unsheltered-open-air environment of the Solar Tower was conducive to obtaining unobstructed radiometric data by land-based and airborne IR imaging assets. Various thermocouples installed on the test panel and an infrared imager located in close proximity to the test panel were used to obtain surface temperature measurements for evaluation and calibration of the radiometric data from the infrared imaging assets. The overall test environment, test article, test approach, and typical test results are discussed.

  19. What are the qualifications and selection criteria for women to be appointed to society journal editorial boards?

    Science.gov (United States)

    Tomizawa, Yasuko

    2014-02-01

    Japan ranks extremely low in global ranking of gender equality. It is not easy for female doctors to acquire leadership positions in member societies of the Japanese Association of Medical Science (JAMS). Very few women are included on editorial boards of English medical journals in Japan. Furthermore, until last year, there had been no female editors in English language journals of surgical societies. The qualifications and criteria for selecting editorial board members of medical journals should be clarified. Medical journals in Japan would gain diversity by including women on editorial boards in the same proportion as women membership in the corresponding medical societies.

  20. Toward a personal health society in cardiology.

    Science.gov (United States)

    Fayn, Jocelyne; Rubel, Paul

    2010-03-01

    In this paper, we present a new generation of health services that has emerged due to the development of advanced information and communication technology (ICT) solutions, like the Enhanced Personal, Intelligent, and Mobile system for Early Detection and Interpretation of Cardiac Syndromes (EPI-MEDICS). It is a personal self-care system that allows any citizen to self-record high-quality ECGs on demand with a smart portable device, which is endowed with powerful ICT capabilities: self-adaptive embedded intelligence, mobile health record management support on SmartMedia card, embedded Web server, and wireless communication. The EPI-MEDICS solution design also provides ambient, intelligent, and pervasive computing services offering any citizen a ubiquitous, reliable, and efficient management of his/her own cardiac status. A multicentric evaluation performed in Europe with a series of device prototypes and the performance assessment of the original methods of signal synthesis that were designed to guarantee a high interoperability level of the recorded data within the clinical practice, as well as of the decision-support methodologies that were developed for an early detection of life-threatening myocardial ischemia and arrhythmia, at home or anywhere, demonstrate the pertinence of going toward a personal health society in cardiology, which still yields the highest mortality rate in industrialized countries.

  1. Abortion - medical

    Science.gov (United States)

    Therapeutic medical abortion; Elective medical abortion; Induced abortion; Nonsurgical abortion ... A medical, or nonsurgical, abortion can be done within 7 weeks from the first day of the woman's last ...

  2. Women on professional society and journal editorial boards.

    Science.gov (United States)

    Morton, Melinda J; Sonnad, Seema S

    2007-07-01

    Membership on a professional medical society or journal editorial board is a marker of influence and prestige for those in academic medicine. This study presents the first comprehensive quantification of women on these boards and the implications for women in medicine. The numbers of women and men on professional society and journal editorial boards across 28 specialties (March 2004) were counted. The number of women holding multiple roles on these boards and the number of women holding top leadership positions on these boards were counted, and these proportions were compared. Three-thousand-four-hundred-seventy-three individuals on 39 professional medical society boards and 54 journal editorial boards were included. Eighty-three percent (2,884) of board members were male. Men occupied > 80% of top leadership positions on these boards. Thirty-five of the 589 women in the study held multiple roles. Anesthesiology (p women on boards in comparison to the total women in the specialty. Internal medicine, plastic surgery, cardiology and general surgery had nearly equivalent proportions; in otolaryngology and family medicine, female board members slightly exceeded the proportion of women in the field. Women's representation on society and editorial boards does not always reflect their presence in medical specialties, and it is critically lacking in certain specialties. Efforts should be made to attain parity of women leaders on these boards. Further efforts should be made to eliminate barriers to women's leadership in medicine.

  3. INFORMATION SOCIETY EVOLUTION AND EFFECTS

    DEFF Research Database (Denmark)

    Brooks, Anthony Lewis

    2016-01-01

    The evolution and effects of the information society can be exemplified via many threads, both in hard and soft science, according to ones’ discipline and field. In this contribution, the speaker’s three decades of applied research acts as a vehicle to demonstrate development and impact via...... commercial product, national and international projects, and industry startups (including impactful third party research investigations) form the basis for discussion. Beyond this, a wider more generic perspective reflects on product adoption that illustrate todays’ contemporary e-society tendencies where...... recent influx and uptake of consumer-targeted artificial reality products point to society’s desire for alternative sensory experiences. Posited is how aligned with this desire there is a need for new ethical considerations in research as was found in the speaker’s research at the end of the 20th century...

  4. Leadership in an Egalitarian Society

    Science.gov (United States)

    von Rueden, Christopher; Gurven, Michael; Kaplan, Hillard; Stieglitz, Jonathan

    2014-01-01

    Leadership is instrumental to resolution of collective action dilemmas, particularly in large, heterogeneous groups. Less is known about the characteristics or effectiveness of leadership in small-scale, homogeneous, and relatively egalitarian societies, in which humans have spent most of our existence. Among Tsimane’ forager-horticulturalists of Bolivia, we (1) assess traits of elected leaders under experimental and naturalistic conditions and (2) test whether leaders impact collective action outcomes. We find that elected leaders are physically strong and have more kin and other exchange partners. Their ranks on physical dominance, kin support, and trustworthiness predict how well their groups perform, but only where group members have a history of collaborative interaction. Leaders do not take more of the spoils. We discuss why physically strong leaders can be compatible with egalitarianism, and we suggest that leaders in egalitarian societies may be more motivated by maintaining an altruistic reputation than by short-term rewards of collective action. PMID:25240393

  5. Space Weather, Environment and Societies

    CERN Document Server

    Lilensten, Jean

    2006-01-01

    Our planet exists within a space environment affected by constantly changing solar atmosphere producing cosmic particles and electromagnetic waves. This "space weather" profoundly influences the performance of our technology because we primarily use two means for transmitting information and energy; namely, electromagnetic waves and electricity. On an everyday basis, we have developed methods to cope with the normal conditions. However, the sun remains a fiery star whose 'angry' outbursts can potentially destroy spacecrafts, kill astronauts, melt electricity transformers, stop trains, and generally wreak havoc with human activities. Space Weather is the developing field within astronomy that aims at predicting the sun’s violent activity and minimizing the impacts on our daily lives. Space Weather, Environment, and Societies explains why our technological societies are so dependent on solar activity and how the Sun disturbs the transmission of information and energy. Footnotes expand specific points and the ...

  6. Human cloning and 'posthuman' society.

    Science.gov (United States)

    Blackford, Russell

    2005-01-01

    Since early 1997, when the creation of Dolly the sheep by somatic cell nuclear transfer was announced in Nature, numerous government reports, essays, articles and books have considered the ethical problems and policy issues surrounding human reproductive cloning. In this article, I consider what response a modern liberal society should give to the prospect of human cloning, if it became safe and practical. Some opponents of human cloning have argued that permitting it would place us on a slippery slope to a repugnant future society, comparable to that portrayed in Aldous Huxley's novel, Brave New World. I conclude that, leaving aside concerns about safety, none of the psychological or social considerations discussed in this article provides an adequate policy justification for invoking the state's coercive powers to prevent human cloning.

  7. School in the knowledge society

    DEFF Research Database (Denmark)

    Sørensen, Birgitte Holm; Levinsen, Karin

    2011-01-01

      Implementation of ICT in Danish and Nordic schools gradually moves from an industrial towards an emerging knowledge society school paradigm. Simultaneously it, digital literacy and the school's physical and social organization are constantly negotiated. In schools that proactively meet the chal......  Implementation of ICT in Danish and Nordic schools gradually moves from an industrial towards an emerging knowledge society school paradigm. Simultaneously it, digital literacy and the school's physical and social organization are constantly negotiated. In schools that proactively meet...... the challenges new designs for teaching and learning emerge while teacher-student relations transform and the children and young people's competencies are resources in the processes of learning. The chapter present research based on the proactive schools and exemplifies possible outlines of the school...

  8. Data science and digital society

    Directory of Open Access Journals (Sweden)

    Chen Cathy Yi-Hsuan

    2017-07-01

    Full Text Available Data Science looks at raw numbers and informational objects created by different disciplines. The Digital Society creates information and numbers from many scientific disciplines. The amassment of data though makes is hard to find structures and requires a skill full analysis of this massive raw material. The thoughts presented here on DS2 - Data Science & Digital Society analyze these challenges and offers ways to handle the questions arising in this evolving context. We propose three levels of analysis and lay out how one can react to the challenges that come about. Concrete examples concern Credit default swaps, Dynamic Topic modeling, Crypto currencies and above all the quantitative analysis of real data in a DS2 context.

  9. Art education, Creativity and Society

    OpenAIRE

    Filip, Michal

    2012-01-01

    Title: Art education, Creativity and Society Author: Michal Filip Department: Department of Art Education Supervisor: doc. PaedDr. Pavel Šamšula, CSc. Abstract: The dissertation addresses the issue of creativity in art education. The theoretical part of the work first explains the general foundation of the social context, which plays a key role in education focused on the development of creativity. The author outlines the historical roots of the relationship between art education and creativi...

  10. Collections XVII (The Malone Society)

    OpenAIRE

    Keenan, Siobhan; Giddens, Eugene

    2016-01-01

    Collections XVII is the latest volume in the Malone Society's pioneering series of editions of miscellaneous documents relating to English theatre and drama before 1642. It is likely to be of special interest not only to early theatre historians but to those working on Tudor and Stuart court and civic culture, manuscript writing, household drama and early modern women's writing, as it publishes new material in each of these fields. The book includes items such as Revels Office accounts, a pla...

  11. Nordic society for radiation protection

    International Nuclear Information System (INIS)

    Soegaard-Hansen, J.; Damkjaer, A.

    1999-11-01

    The key themes of teh 12th ordinary general meeting of the Nordic Society for Radiation Protection were: RADIATION - ENVIRONMENT - INFORMATION. A number of outstanding international experts accepted to contribute on the meetings first day with invited presentations, which focussed on these themes. In all 38 oral presentations and 28 posters are included in the present Proceedings, which furthermore contains a resume of discussions from the special session on 'Controllable Dose'. (EHS)

  12. Architecture for the silvering society

    DEFF Research Database (Denmark)

    Andersson, Jonas E; Rönn, Magnus

    Abstract In the context of the universal ageing process that is currently taking place in western society, the organization of architecture competitions that deals with space for dependent ageing comes of relevance. Based on the welfare regime theory, it could be argued that this type of architec......Abstract In the context of the universal ageing process that is currently taking place in western society, the organization of architecture competitions that deals with space for dependent ageing comes of relevance. Based on the welfare regime theory, it could be argued that this type...... by the Swedish Institute of Assistive Technology (SIAT), which administered the governmental allocation of 50 million SEK. The research material was accumulated by use of internet searches, interviews and questionnaires. The analysis applied pattern seeking and involved close reading, document analysis...... on ageing, eldercare and space. Consequently, architecture competitions that focus on the emerging ageing society could be seen as a restrained type of space for architects to digress. National welfare goals and existing means to achieve these goals act as inhibitors for an innovative spatial preparation...

  13. Inter-Society Research Committee

    International Nuclear Information System (INIS)

    Akiyama, Mamoru; Higuchi, Masahisa.

    1996-01-01

    World-wide tendencies and circumstances for nuclear power cannot be said to be moving full of sail with a favorable wind, due to nuclear power plant accidents and comparatively little economical benefit. The present Nuclear Power Plant situation is that some personnel understand a need for the development from the viewpoint of efficient energy usage in the world and environmental problems like global warming. At the same time others oppose future nuclear development from the viewpoint of safety problems and economic cost. These issues may end nuclear development worldwide. Nuclear development must be considered from an international viewpoint and other various aspects. Therefore, all countries concerned should cooperative in the adjustment of research carried out by each country. Nuclear power's future must be efficient in the utilization of limited resources (money, manpower and facilities). It is concluded that the ISRC should only discuss technical matters on nuclear engineering, independent from political influence. Societies agreeing to this idea, provide the ISRC with money and/or manpower and/or facilities. The ISRC will consist of a research program committee and research task forces. Members of the Research Program Committee are the chairmen of the research task forces who are also society representatives. The Committee will discuss research programs and resources. The research task forces will consist of one society representative chairman and specialists on the program

  14. Academic health centers and society: an ethical reflection.

    Science.gov (United States)

    Pellegrino, E D

    1999-08-01

    Academic health centers--which combine university, medical school, and hospital--exist to satisfy universal human needs and thus are by definition instruments of social purpose. Their core mission is threefold: to provide medical knowledge that can help relieve and prevent illness and suffering, to supply practitioners able to apply that knowledge wisely, and to serve as sites where optimal use of medical knowledge can be demonstrated and investigated. Maintaining a balance between core mission and responsiveness to social trends is a delicate exercise. Overly close accommodation to such trends can endanger the core mission, as has occurred in the United States with regard to managed care. Society and academic health centers have mutual obligations. Obligations of society include giving academic health centers financial and other support and allowing them sufficient freedom to pursue their mission; obligations of academic medical centers include accepting greater scrutiny by society and providing social criticism on matters relating to health. A task for the future is to discern how academic health centers can be responsive to social needs without being totally subservient to societal desires.

  15. Images and society (or Images, Society and its Decoding

    Directory of Open Access Journals (Sweden)

    Juan Soto Ramírez

    2012-11-01

    Full Text Available Common sense, the thinking of the people par excellence, asserts that: a picture is worth a thousand words. This is a big mistake. The images are not carriers of meanings. The images always go through three basic processes are: production, circulation and reception. These processes are always determined in the time and social space. They are always the result of multiple relationships (social, ideological, political, moral, religious, etc., established with them. Always there are so many elements beyond the image, which determines its meaning. The meaning of an image always depends on the relationships established with it in a historical time and space, socially and culturally determined. The images are never alone. To decrypt their meanings, you must first know the symbolic life of the societies in which they appear. Images do not have a single meaning because it depends on the historical and cultural geography which presents. The images always have a close relationship with the society they were born. The Muhammad cartoons not offend everyone equally.

  16. Information exchange of the Atomic Energy Society of Japan with nuclear societies worldwide

    International Nuclear Information System (INIS)

    Hori, Masao; Tomita, Yasushi

    2000-01-01

    The Atomic Energy Society of Japan (AESJ) exchanges information with nuclear societies worldwide by intersocietal communication through international councils of nuclear societies and through bilateral agreements between foreign societies and by such media as international meetings, publications, and Internet applications

  17. Medicamentalisation – Medicamentation in the Societies of Late Capitalism

    Directory of Open Access Journals (Sweden)

    Boštjan Slatnar

    2012-12-01

    Full Text Available The aim is to present some basic characteristics of the processes of medicalisation and medicamentalisation. Both processes are very complex with various negative and positive effects on the lives of individuals and on the sustainability of public health care systems. The problem is further complicated by the broadness of definitions of both processes on one hand and by foregrounding the analysis of individual cases of medicalization on the other. The most important feature of medicalisation will be emphasized: application of the bio-medical model for explanations and for the treatment of conditions which belong to the normal range of human physical and emotional states. According to this, medicalization is the process by which medical diagnosis and treatement are attributed to normal physical and psychological problems. Medicamentalisation is closely connected with the process of medicalisation, but it is not a necessary consequence of the medicalisation of an individual psychological or physical state. The actors of both processes are numerous. The most important are: the pharmaceutical industry, mass media and different kind of patients associations. The most important direct causes of the medicalisation and medicamentalisation of modern societies are directed to consumer marketing of prescription and nonprescription medications and disease mongering. One of the most interesting consequences of medicalisation is the emergence of the medical consumer, that still further brings changes to the relation between the physician and the patient. Modifications in the privileged places of medicalized joints of "power–knowledge" are significant socio-cultural effects of medicalization.

  18. Social accountability of medical education

    DEFF Research Database (Denmark)

    Lindgren, Stefan; Karle, Hans

    2011-01-01

    accountability of medical education must be included in all accreditation processes at all levels. The global standards programme by World Federation for Medical Education (WFME) provides tools for national or regional accreditation but also guidance for reforms and quality improvement. The standards are used......Medical doctors constitute a profession which embraces trust from and accountability to society. This responsibility extends to all medical educational institutions. Social accountability of medical education means a willingness and ability to adjust to the needs of patients and health care systems...... both nationally and globally. But it also implies a responsibility to contribute to the development of medicine and society through fostering competence for research and improvement. Accreditation is a process by which a statutory body evaluates and recognises an educational institution and/or its...

  19. Material civilization: things and society.

    Science.gov (United States)

    Dant, Tim

    2006-06-01

    This paper argues that although classical sociology has largely overlooked the importance of social relations with the material world in shaping the form of society, Braudel's concept of 'material civilization' is a useful way to begin to understand the sociological significance of this relationship. The limitations of Braudel's historical and general concept can be partially overcome with Elias's analysis of the connection between 'technization' and 'civilization' that allows for both a civilizing and a de-civilizing impact of emergent forms of material relation that both lengthen and shorten the chains of interdependence between the members of a society. It is suggested that the concept of the 'morality of things' employed by a number of commentators is useful in summarizing the civilizing effects of material objects and addressing their sociological significance. From the sociology of consumption the idea of materiality as a sign of social relationships can be drawn, and from the sociology of technology the idea of socio-technical systems and actor-networks can contribute to the understanding of material civilization. It is argued that the concept of 'material capital' can usefully summarize the variable social value of objects but to understand the complexity of material civilization as it unfolds in everyday life, an analysis of 'material interaction' is needed. Finally the paper suggests some initial themes and issues apparent in contemporary society that the sociological study of material civilization might address; the increased volume, functional complexity and material specificity of objects and the increased social complexity, autonomy and substitutability that is entailed. A theory of 'material civilization' is the first step in establishing a sociology of objects.

  20. Human, nature, society: synergetic dimension

    Directory of Open Access Journals (Sweden)

    Н. А. Вахнин

    2016-11-01

    Full Text Available The paper gives an overview of the major directions of development in the system ‘human – society – nature’ and their philosophical and scientific contemplation. The fundamental achievements of the society and responsibility of the mankind for its progressive development have been analyzed. The distinctive features of changes in human interactions with nature in the era of globalization and intensive progress in science and technology are presented. It is reported that numerous studies of human intervention in the biosphere processes prove that it can become the most profound anomaly in the development of not only the biosphere but of the entire Earth system, i.e. become a cause of such conditions on the Earth that would be alien to the general biological process in its ontological sense.  The consequence of this is a dissonance in the rate of social evolution (social form of matter and nature evolution (all pre-social forms of matter, which is translated into the disturbed ‘functional optimum’ of intensive development of the ‘human-society-nature’ system, a threat of environmental crisis and disturbances in the very biological nature  of a human. It is asserted that synergetics today still remains appealing due to a need to find adequate answers to global civilization challenges in the world living through a crisis. According to estimations, human synergetic activities come to the fore in the 21st century, it is especially true for small and large self-organizing groups, which shall not only live in harmony with the nature, but also successfully manage all different-level subsystems. It is shown that synergetics is a new dialogue between human and nature, a new synthesis of the human knowl- edge and wisdom. This is a new approach to gaining insight into the evolution crises, instability and chaos, to mastering complicated systems in the state of volatility.