WorldWideScience

Sample records for accurate classification system

  1. Accurate crop classification using hierarchical genetic fuzzy rule-based systems

    Science.gov (United States)

    Topaloglou, Charalampos A.; Mylonas, Stelios K.; Stavrakoudis, Dimitris G.; Mastorocostas, Paris A.; Theocharis, John B.

    2014-10-01

    This paper investigates the effectiveness of an advanced classification system for accurate crop classification using very high resolution (VHR) satellite imagery. Specifically, a recently proposed genetic fuzzy rule-based classification system (GFRBCS) is employed, namely, the Hierarchical Rule-based Linguistic Classifier (HiRLiC). HiRLiC's model comprises a small set of simple IF-THEN fuzzy rules, easily interpretable by humans. One of its most important attributes is that its learning algorithm requires minimum user interaction, since the most important learning parameters affecting the classification accuracy are determined by the learning algorithm automatically. HiRLiC is applied in a challenging crop classification task, using a SPOT5 satellite image over an intensively cultivated area in a lake-wetland ecosystem in northern Greece. A rich set of higher-order spectral and textural features is derived from the initial bands of the (pan-sharpened) image, resulting in an input space comprising 119 features. The experimental analysis proves that HiRLiC compares favorably to other interpretable classifiers of the literature, both in terms of structural complexity and classification accuracy. Its testing accuracy was very close to that obtained by complex state-of-the-art classification systems, such as the support vector machines (SVM) and random forest (RF) classifiers. Nevertheless, visual inspection of the derived classification maps shows that HiRLiC is characterized by higher generalization properties, providing more homogeneous classifications that the competitors. Moreover, the runtime requirements for producing the thematic map was orders of magnitude lower than the respective for the competitors.

  2. The molecular genetics and morphometry-based Endometrial Intraepithelial Neoplasia classification system predicts disease progression in Endometrial hyperplasia more accurately than the 1994 World Health Organization classification system

    NARCIS (Netherlands)

    Baak, JP; Mutter, GL; Robboy, S; van Diest, PJ; Uyterlinde, AM; Orbo, A; Palazzo, J; Fiane, B; Lovslett, K; Burger, C; Voorhorst, F; Verheijen, RH

    2005-01-01

    BACKGROUND. The objective of this study was to compare the accuracy of disease progression prediction of the molecular genetics and morphometry-based Endometrial Intraepithelial Neoplasia (EIN) and World Health Organization 1994 (WHO94) classification systems in patients with endometrial hyperplasia

  3. Accurate stemming of Dutch for text classification

    NARCIS (Netherlands)

    Gaustad, T; Bouma, G; Theune, M; Nijholt, A; Hondorp, H

    2002-01-01

    This paper investigates the use of stemming for classification of Dutch (email) texts. We introduce a stemmer, which combines dictionary lookup (implemented efficiently as a finite state automaton) with a rule-based backup strategy and,how, that it outperforms the Dutch Porter stemmer in terms of ac

  4. Accurate molecular classification of cancer using simple rules

    Directory of Open Access Journals (Sweden)

    Gotoh Osamu

    2009-10-01

    Full Text Available Abstract Background One intractable problem with using microarray data analysis for cancer classification is how to reduce the extremely high-dimensionality gene feature data to remove the effects of noise. Feature selection is often used to address this problem by selecting informative genes from among thousands or tens of thousands of genes. However, most of the existing methods of microarray-based cancer classification utilize too many genes to achieve accurate classification, which often hampers the interpretability of the models. For a better understanding of the classification results, it is desirable to develop simpler rule-based models with as few marker genes as possible. Methods We screened a small number of informative single genes and gene pairs on the basis of their depended degrees proposed in rough sets. Applying the decision rules induced by the selected genes or gene pairs, we constructed cancer classifiers. We tested the efficacy of the classifiers by leave-one-out cross-validation (LOOCV of training sets and classification of independent test sets. Results We applied our methods to five cancerous gene expression datasets: leukemia (acute lymphoblastic leukemia [ALL] vs. acute myeloid leukemia [AML], lung cancer, prostate cancer, breast cancer, and leukemia (ALL vs. mixed-lineage leukemia [MLL] vs. AML. Accurate classification outcomes were obtained by utilizing just one or two genes. Some genes that correlated closely with the pathogenesis of relevant cancers were identified. In terms of both classification performance and algorithm simplicity, our approach outperformed or at least matched existing methods. Conclusion In cancerous gene expression datasets, a small number of genes, even one or two if selected correctly, is capable of achieving an ideal cancer classification effect. This finding also means that very simple rules may perform well for cancerous class prediction.

  5. Accurate mobile malware detection and classification in the cloud.

    Science.gov (United States)

    Wang, Xiaolei; Yang, Yuexiang; Zeng, Yingzhi

    2015-01-01

    As the dominator of the Smartphone operating system market, consequently android has attracted the attention of s malware authors and researcher alike. The number of types of android malware is increasing rapidly regardless of the considerable number of proposed malware analysis systems. In this paper, by taking advantages of low false-positive rate of misuse detection and the ability of anomaly detection to detect zero-day malware, we propose a novel hybrid detection system based on a new open-source framework CuckooDroid, which enables the use of Cuckoo Sandbox's features to analyze Android malware through dynamic and static analysis. Our proposed system mainly consists of two parts: anomaly detection engine performing abnormal apps detection through dynamic analysis; signature detection engine performing known malware detection and classification with the combination of static and dynamic analysis. We evaluate our system using 5560 malware samples and 6000 benign samples. Experiments show that our anomaly detection engine with dynamic analysis is capable of detecting zero-day malware with a low false negative rate (1.16 %) and acceptable false positive rate (1.30 %); it is worth noting that our signature detection engine with hybrid analysis can accurately classify malware samples with an average positive rate 98.94 %. Considering the intensive computing resources required by the static and dynamic analysis, our proposed detection system should be deployed off-device, such as in the Cloud. The app store markets and the ordinary users can access our detection system for malware detection through cloud service.

  6. How accurate are the European Union's classifications of chemical substances.

    Science.gov (United States)

    Rudén, Christina; Hansson, Sven Ove

    2003-09-30

    The European Commission has decided on harmonized classifications for a large number of individual chemicals according to its own directive for classification and labeling of dangerous substances. We have compared the harmonized classifications for acute oral toxicity to the acute oral toxicity data available in the RTECS database. Of the 992 substances eligible for this comparison, 15% were assigned a too low danger class and 8% a too high danger class according to the RTECS data. Due to insufficient transparency-scientific documentations of the classification decisions are not available-the causes of this discrepancy can only be hypothesized. We propose that the scientific motivations of future classifications be published and that the apparent over- and underclassifications in the present system be either explained or rectified, according to what are the facts in the matter.

  7. Neuromuscular disease classification system

    Science.gov (United States)

    Sáez, Aurora; Acha, Begoña; Montero-Sánchez, Adoración; Rivas, Eloy; Escudero, Luis M.; Serrano, Carmen

    2013-06-01

    Diagnosis of neuromuscular diseases is based on subjective visual assessment of biopsies from patients by the pathologist specialist. A system for objective analysis and classification of muscular dystrophies and neurogenic atrophies through muscle biopsy images of fluorescence microscopy is presented. The procedure starts with an accurate segmentation of the muscle fibers using mathematical morphology and a watershed transform. A feature extraction step is carried out in two parts: 24 features that pathologists take into account to diagnose the diseases and 58 structural features that the human eye cannot see, based on the assumption that the biopsy is considered as a graph, where the nodes are represented by each fiber, and two nodes are connected if two fibers are adjacent. A feature selection using sequential forward selection and sequential backward selection methods, a classification using a Fuzzy ARTMAP neural network, and a study of grading the severity are performed on these two sets of features. A database consisting of 91 images was used: 71 images for the training step and 20 as the test. A classification error of 0% was obtained. It is concluded that the addition of features undetectable by the human visual inspection improves the categorization of atrophic patterns.

  8. Ontologies vs. Classification Systems

    DEFF Research Database (Denmark)

    Madsen, Bodil Nistrup; Erdman Thomsen, Hanne

    2009-01-01

    What is an ontology compared to a classification system? Is a taxonomy a kind of classification system or a kind of ontology? These are questions that we meet when working with people from industry and public authorities, who need methods and tools for concept clarification, for developing meta d...... classification systems and meta data taxonomies, should be based on ontologies.......What is an ontology compared to a classification system? Is a taxonomy a kind of classification system or a kind of ontology? These are questions that we meet when working with people from industry and public authorities, who need methods and tools for concept clarification, for developing meta...... data sets or for obtaining advanced search facilities. In this paper we will present an attempt at answering these questions. We will give a presentation of various types of ontologies and briefly introduce terminological ontologies. Furthermore we will argue that classification systems, e.g. product...

  9. Redundancy-Free, Accurate Analytical Center Machine for Classification

    Institute of Scientific and Technical Information of China (English)

    ZHENGFanzi; QIUZhengding; LengYonggang; YueJianhai

    2005-01-01

    Analytical center machine (ACM) has remarkable generalization performance based on analytical center of version space and outperforms SVM. From the analysis of geometry of machine learning and principle of ACM, it is showed that some training patterns are redundant to the definition of version space. Redundant patterns push ACM classifier away from analytical center of the prime version space so that the generalization performance degrades, at the same time redundant patterns slow down the classifier and reduce the efficiency of storage. Thus, an incremental algorithm is proposed to remove redundant patterns and embed into the frame of ACM that yields a Redundancy free accurate-Analytical center machine (RFA-ACM) for classification. Experiments with Heart, Thyroid, Banana datasets demonstrate the validity of RFA-ACM.

  10. Aircraft Operations Classification System

    Science.gov (United States)

    Harlow, Charles; Zhu, Weihong

    2001-01-01

    Accurate data is important in the aviation planning process. In this project we consider systems for measuring aircraft activity at airports. This would include determining the type of aircraft such as jet, helicopter, single engine, and multiengine propeller. Some of the issues involved in deploying technologies for monitoring aircraft operations are cost, reliability, and accuracy. In addition, the system must be field portable and acceptable at airports. A comparison of technologies was conducted and it was decided that an aircraft monitoring system should be based upon acoustic technology. A multimedia relational database was established for the study. The information contained in the database consists of airport information, runway information, acoustic records, photographic records, a description of the event (takeoff, landing), aircraft type, and environmental information. We extracted features from the time signal and the frequency content of the signal. A multi-layer feed-forward neural network was chosen as the classifier. Training and testing results were obtained. We were able to obtain classification results of over 90 percent for training and testing for takeoff events.

  11. Automatic classification and accurate size measurement of blank mask defects

    Science.gov (United States)

    Bhamidipati, Samir; Paninjath, Sankaranarayanan; Pereira, Mark; Buck, Peter

    2015-07-01

    complexity of defects encountered. The variety arises due to factors such as defect nature, size, shape and composition; and the optical phenomena occurring around the defect. This paper focuses on preliminary characterization results, in terms of classification and size estimation, obtained by Calibre MDPAutoClassify tool on a variety of mask blank defects. It primarily highlights the challenges faced in achieving the results with reference to the variety of defects observed on blank mask substrates and the underlying complexities which make accurate defect size measurement an important and challenging task.

  12. Accurate phylogenetic classification of DNA fragments based onsequence composition

    Energy Technology Data Exchange (ETDEWEB)

    McHardy, Alice C.; Garcia Martin, Hector; Tsirigos, Aristotelis; Hugenholtz, Philip; Rigoutsos, Isidore

    2006-05-01

    Metagenome studies have retrieved vast amounts of sequenceout of a variety of environments, leading to novel discoveries and greatinsights into the uncultured microbial world. Except for very simplecommunities, diversity makes sequence assembly and analysis a verychallenging problem. To understand the structure a 5 nd function ofmicrobial communities, a taxonomic characterization of the obtainedsequence fragments is highly desirable, yet currently limited mostly tothose sequences that contain phylogenetic marker genes. We show that forclades at the rank of domain down to genus, sequence composition allowsthe very accurate phylogenetic 10 characterization of genomic sequence.We developed a composition-based classifier, PhyloPythia, for de novophylogenetic sequence characterization and have trained it on adata setof 340 genomes. By extensive evaluation experiments we show that themethodis accurate across all taxonomic ranks considered, even forsequences that originate fromnovel organisms and are as short as 1kb.Application to two metagenome datasets 15 obtained from samples ofphosphorus-removing sludge showed that the method allows the accurateclassification at genus level of most sequence fragments from thedominant populations, while at the same time correctly characterizingeven larger parts of the samples at higher taxonomic levels.

  13. HIPPI: highly accurate protein family classification with ensembles of HMMs

    Directory of Open Access Journals (Sweden)

    Nam-phuong Nguyen

    2016-11-01

    Full Text Available Abstract Background Given a new biological sequence, detecting membership in a known family is a basic step in many bioinformatics analyses, with applications to protein structure and function prediction and metagenomic taxon identification and abundance profiling, among others. Yet family identification of sequences that are distantly related to sequences in public databases or that are fragmentary remains one of the more difficult analytical problems in bioinformatics. Results We present a new technique for family identification called HIPPI (Hierarchical Profile Hidden Markov Models for Protein family Identification. HIPPI uses a novel technique to represent a multiple sequence alignment for a given protein family or superfamily by an ensemble of profile hidden Markov models computed using HMMER. An evaluation of HIPPI on the Pfam database shows that HIPPI has better overall precision and recall than blastp, HMMER, and pipelines based on HHsearch, and maintains good accuracy even for fragmentary query sequences and for protein families with low average pairwise sequence identity, both conditions where other methods degrade in accuracy. Conclusion HIPPI provides accurate protein family identification and is robust to difficult model conditions. Our results, combined with observations from previous studies, show that ensembles of profile Hidden Markov models can better represent multiple sequence alignments than a single profile Hidden Markov model, and thus can improve downstream analyses for various bioinformatic tasks. Further research is needed to determine the best practices for building the ensemble of profile Hidden Markov models. HIPPI is available on GitHub at https://github.com/smirarab/sepp .

  14. Accurate Classification of RNA Structures Using Topological Fingerprints

    Science.gov (United States)

    Li, Kejie; Gribskov, Michael

    2016-01-01

    While RNAs are well known to possess complex structures, functionally similar RNAs often have little sequence similarity. While the exact size and spacing of base-paired regions vary, functionally similar RNAs have pronounced similarity in the arrangement, or topology, of base-paired stems. Furthermore, predicted RNA structures often lack pseudoknots (a crucial aspect of biological activity), and are only partially correct, or incomplete. A topological approach addresses all of these difficulties. In this work we describe each RNA structure as a graph that can be converted to a topological spectrum (RNA fingerprint). The set of subgraphs in an RNA structure, its RNA fingerprint, can be compared with the fingerprints of other RNA structures to identify and correctly classify functionally related RNAs. Topologically similar RNAs can be identified even when a large fraction, up to 30%, of the stems are omitted, indicating that highly accurate structures are not necessary. We investigate the performance of the RNA fingerprint approach on a set of eight highly curated RNA families, with diverse sizes and functions, containing pseudoknots, and with little sequence similarity–an especially difficult test set. In spite of the difficult test set, the RNA fingerprint approach is very successful (ROC AUC > 0.95). Due to the inclusion of pseudoknots, the RNA fingerprint approach both covers a wider range of possible structures than methods based only on secondary structure, and its tolerance for incomplete structures suggests that it can be applied even to predicted structures. Source code is freely available at https://github.rcac.purdue.edu/mgribsko/XIOS_RNA_fingerprint. PMID:27755571

  15. Photometric brown-dwarf classification. I. A method to identify and accurately classify large samples of brown dwarfs without spectroscopy

    Science.gov (United States)

    Skrzypek, N.; Warren, S. J.; Faherty, J. K.; Mortlock, D. J.; Burgasser, A. J.; Hewett, P. C.

    2015-02-01

    Aims: We present a method, named photo-type, to identify and accurately classify L and T dwarfs onto the standard spectral classification system using photometry alone. This enables the creation of large and deep homogeneous samples of these objects efficiently, without the need for spectroscopy. Methods: We created a catalogue of point sources with photometry in 8 bands, ranging from 0.75 to 4.6 μm, selected from an area of 3344 deg2, by combining SDSS, UKIDSS LAS, and WISE data. Sources with 13.0 0.8, were then classified by comparison against template colours of quasars, stars, and brown dwarfs. The L and T templates, spectral types L0 to T8, were created by identifying previously known sources with spectroscopic classifications, and fitting polynomial relations between colour and spectral type. Results: Of the 192 known L and T dwarfs with reliable photometry in the surveyed area and magnitude range, 189 are recovered by our selection and classification method. We have quantified the accuracy of the classification method both externally, with spectroscopy, and internally, by creating synthetic catalogues and accounting for the uncertainties. We find that, brighter than J = 17.5, photo-type classifications are accurate to one spectral sub-type, and are therefore competitive with spectroscopic classifications. The resultant catalogue of 1157 L and T dwarfs will be presented in a companion paper.

  16. Bosniak Classification system

    DEFF Research Database (Denmark)

    Graumann, Ole; Osther, Susanne Sloth; Karstoft, Jens;

    2014-01-01

    . Purpose: To investigate the inter- and intra-observer agreement among experienced uroradiologists when categorizing complex renal cysts according to the Bosniak classification. Material and Methods: The original categories of 100 cystic renal masses were chosen as “Gold Standard” (GS), established...... to the calculated weighted κ all readers performed “very good” for both inter-observer and intra-observer variation. Most variation was seen in cysts catagorized as Bosniak II, IIF, and III. These results show that radiologists who evaluate complex renal cysts routinely may apply the Bosniak classification...

  17. How Accurately can we Calculate Thermal Systems?

    Energy Technology Data Exchange (ETDEWEB)

    Cullen, D; Blomquist, R N; Dean, C; Heinrichs, D; Kalugin, M A; Lee, M; Lee, Y; MacFarlan, R; Nagaya, Y; Trkov, A

    2004-04-20

    I would like to determine how accurately a variety of neutron transport code packages (code and cross section libraries) can calculate simple integral parameters, such as K{sub eff}, for systems that are sensitive to thermal neutron scattering. Since we will only consider theoretical systems, we cannot really determine absolute accuracy compared to any real system. Therefore rather than accuracy, it would be more precise to say that I would like to determine the spread in answers that we obtain from a variety of code packages. This spread should serve as an excellent indicator of how accurately we can really model and calculate such systems today. Hopefully, eventually this will lead to improvements in both our codes and the thermal scattering models that they use in the future. In order to accomplish this I propose a number of extremely simple systems that involve thermal neutron scattering that can be easily modeled and calculated by a variety of neutron transport codes. These are theoretical systems designed to emphasize the effects of thermal scattering, since that is what we are interested in studying. I have attempted to keep these systems very simple, and yet at the same time they include most, if not all, of the important thermal scattering effects encountered in a large, water-moderated, uranium fueled thermal system, i.e., our typical thermal reactors.

  18. Bosniak classification system

    DEFF Research Database (Denmark)

    Graumann, Ole; Osther, Susanne Sloth; Karstoft, Jens;

    2016-01-01

    at MR and CEUS imaging and those at CT. PURPOSE: To compare diagnostic accuracy of MR, CEUS, and CT when categorizing complex renal cystic masses according to the Bosniak classification. MATERIAL AND METHODS: From February 2011 to June 2012, 46 complex renal cysts were prospectively evaluated by three...... readers. Each mass was categorized according to the Bosniak classification and CT was chosen as gold standard. Kappa was calculated for diagnostic accuracy and data was compared with pathological results. RESULTS: CT images found 27 BII, six BIIF, seven BIII, and six BIV. Forty-three cysts could...... one category lower. Pathologic correlation in six lesions revealed four malignant and two benign lesions. CONCLUSION: CEUS and MR both up- and downgraded renal cysts compared to CT, and until these non-radiation modalities have been refined and adjusted, CT should remain the gold standard...

  19. Accurate and interpretable classification of microspectroscopy pixels using artificial neural networks.

    Science.gov (United States)

    Manescu, Petru; Jong Lee, Young; Camp, Charles; Cicerone, Marcus; Brady, Mary; Bajcsy, Peter

    2017-04-01

    This paper addresses the problem of classifying materials from microspectroscopy at a pixel level. The challenges lie in identifying discriminatory spectral features and obtaining accurate and interpretable models relating spectra and class labels. We approach the problem by designing a supervised classifier from a tandem of Artificial Neural Network (ANN) models that identify relevant features in raw spectra and achieve high classification accuracy. The tandem of ANN models is meshed with classification rule extraction methods to lower the model complexity and to achieve interpretability of the resulting model. The contribution of the work is in designing each ANN model based on the microspectroscopy hypothesis about a discriminatory feature of a certain target class being composed of a linear combination of spectra. The novelty lies in meshing ANN and decision rule models into a tandem configuration to achieve accurate and interpretable classification results. The proposed method was evaluated using a set of broadband coherent anti-Stokes Raman scattering (BCARS) microscopy cell images (600 000  pixel-level spectra) and a reference four-class rule-based model previously created by biochemical experts. The generated classification rule-based model was on average 85% accurate measured by the DICE pixel label similarity metric, and on average 96% similar to the reference rules measured by the vector cosine metric.

  20. CLASSIFICATION OF LEARNING MANAGEMENT SYSTEMS

    Directory of Open Access Journals (Sweden)

    Yu. B. Popova

    2016-01-01

    Full Text Available Using of information technologies and, in particular, learning management systems, increases opportunities of teachers and students in reaching their goals in education. Such systems provide learning content, help organize and monitor training, collect progress statistics and take into account the individual characteristics of each user. Currently, there is a huge inventory of both paid and free systems are physically located both on college servers and in the cloud, offering different features sets of different licensing scheme and the cost. This creates the problem of choosing the best system. This problem is partly due to the lack of comprehensive classification of such systems. Analysis of more than 30 of the most common now automated learning management systems has shown that a classification of such systems should be carried out according to certain criteria, under which the same type of system can be considered. As classification features offered by the author are: cost, functionality, modularity, keeping the customer’s requirements, the integration of content, the physical location of a system, adaptability training. Considering the learning management system within these classifications and taking into account the current trends of their development, it is possible to identify the main requirements to them: functionality, reliability, ease of use, low cost, support for SCORM standard or Tin Can API, modularity and adaptability. According to the requirements at the Software Department of FITR BNTU under the guidance of the author since 2009 take place the development, the use and continuous improvement of their own learning management system.

  1. MEMS accelerometers in accurate mount positioning systems

    Science.gov (United States)

    Mészáros, László; Pál, András.; Jaskó, Attila

    2014-07-01

    In order to attain precise, accurate and stateless positioning of telescope mounts we apply microelectromechanical accelerometer systems (also known as MEMS accelerometers). In common practice, feedback from the mount position is provided by electronic, optical or magneto-mechanical systems or via real-time astrometric solution based on the acquired images. Hence, MEMS-based systems are completely independent from these mechanisms. Our goal is to investigate the advantages and challenges of applying such devices and to reach the sub-arcminute range { that is well smaller than the field-of-view of conventional imaging telescope systems. We present how this sub-arcminute accuracy can be achieved with very cheap MEMS sensors. Basically, these sensors yield raw output within an accuracy of a few degrees. We show what kind of calibration procedures could exploit spherical and cylindrical constraints between accelerometer output channels in order to achieve the previously mentioned accuracy level. We also demonstrate how can our implementation be inserted in a telescope control system. Although this attainable precision is less than both the resolution of telescope mount drive mechanics and the accuracy of astrometric solutions, the independent nature of attitude determination could significantly increase the reliability of autonomous or remotely operated astronomical observations.

  2. HMM-FRAME: accurate protein domain classification for metagenomic sequences containing frameshift errors

    Directory of Open Access Journals (Sweden)

    Sun Yanni

    2011-05-01

    Full Text Available Abstract Background Protein domain classification is an important step in metagenomic annotation. The state-of-the-art method for protein domain classification is profile HMM-based alignment. However, the relatively high rates of insertions and deletions in homopolymer regions of pyrosequencing reads create frameshifts, causing conventional profile HMM alignment tools to generate alignments with marginal scores. This makes error-containing gene fragments unclassifiable with conventional tools. Thus, there is a need for an accurate domain classification tool that can detect and correct sequencing errors. Results We introduce HMM-FRAME, a protein domain classification tool based on an augmented Viterbi algorithm that can incorporate error models from different sequencing platforms. HMM-FRAME corrects sequencing errors and classifies putative gene fragments into domain families. It achieved high error detection sensitivity and specificity in a data set with annotated errors. We applied HMM-FRAME in Targeted Metagenomics and a published metagenomic data set. The results showed that our tool can correct frameshifts in error-containing sequences, generate much longer alignments with significantly smaller E-values, and classify more sequences into their native families. Conclusions HMM-FRAME provides a complementary protein domain classification tool to conventional profile HMM-based methods for data sets containing frameshifts. Its current implementation is best used for small-scale metagenomic data sets. The source code of HMM-FRAME can be downloaded at http://www.cse.msu.edu/~zhangy72/hmmframe/ and at https://sourceforge.net/projects/hmm-frame/.

  3. Approaching system equilibrium with accurate or not accurate feedback information in a two-route system

    Science.gov (United States)

    Zhao, Xiao-mei; Xie, Dong-fan; Li, Qi

    2015-02-01

    With the development of intelligent transport system, advanced information feedback strategies have been developed to reduce traffic congestion and enhance the capacity. However, previous strategies provide accurate information to travelers and our simulation results show that accurate information brings negative effects, especially in delay case. Because travelers prefer to the best condition route with accurate information, and delayed information cannot reflect current traffic condition but past. Then travelers make wrong routing decisions, causing the decrease of the capacity and the increase of oscillations and the system deviating from the equilibrium. To avoid the negative effect, bounded rationality is taken into account by introducing a boundedly rational threshold BR. When difference between two routes is less than the BR, routes have equal probability to be chosen. The bounded rationality is helpful to improve the efficiency in terms of capacity, oscillation and the gap deviating from the system equilibrium.

  4. Automated Periodontal Diseases Classification System

    Directory of Open Access Journals (Sweden)

    Aliaa A. A. Youssif

    2012-01-01

    Full Text Available This paper presents an efficient and innovative system for automated classification of periodontal diseases, The strength of our technique lies in the fact that it incorporates knowledge from the patients' clinical data, along with the features automatically extracted from the Haematoxylin and Eosin (H&E stained microscopic images. Our system uses image processing techniques based on color deconvolution, morphological operations, and watershed transforms for epithelium & connective tissue segmentation, nuclear segmentation, and extraction of the microscopic immunohistochemical features for the nuclei, dilated blood vessels & collagen fibers. Also, Feedforward Backpropagation Artificial Neural Networks are used for the classification process. We report 100% classification accuracy in correctly identifying the different periodontal diseases observed in our 30 samples dataset.

  5. Accurate upper body rehabilitation system using kinect.

    Science.gov (United States)

    Sinha, Sanjana; Bhowmick, Brojeshwar; Chakravarty, Kingshuk; Sinha, Aniruddha; Das, Abhijit

    2016-08-01

    The growing importance of Kinect as a tool for clinical assessment and rehabilitation is due to its portability, low cost and markerless system for human motion capture. However, the accuracy of Kinect in measuring three-dimensional body joint center locations often fails to meet clinical standards of accuracy when compared to marker-based motion capture systems such as Vicon. The length of the body segment connecting any two joints, measured as the distance between three-dimensional Kinect skeleton joint coordinates, has been observed to vary with time. The orientation of the line connecting adjoining Kinect skeletal coordinates has also been seen to differ from the actual orientation of the physical body segment. Hence we have proposed an optimization method that utilizes Kinect Depth and RGB information to search for the joint center location that satisfies constraints on body segment length and as well as orientation. An experimental study have been carried out on ten healthy participants performing upper body range of motion exercises. The results report 72% reduction in body segment length variance and 2° improvement in Range of Motion (ROM) angle hence enabling to more accurate measurements for upper limb exercises.

  6. Accurate Classification of Protein Subcellular Localization from High-Throughput Microscopy Images Using Deep Learning

    Directory of Open Access Journals (Sweden)

    Tanel Pärnamaa

    2017-05-01

    Full Text Available High-throughput microscopy of many single cells generates high-dimensional data that are far from straightforward to analyze. One important problem is automatically detecting the cellular compartment where a fluorescently-tagged protein resides, a task relatively simple for an experienced human, but difficult to automate on a computer. Here, we train an 11-layer neural network on data from mapping thousands of yeast proteins, achieving per cell localization classification accuracy of 91%, and per protein accuracy of 99% on held-out images. We confirm that low-level network features correspond to basic image characteristics, while deeper layers separate localization classes. Using this network as a feature calculator, we train standard classifiers that assign proteins to previously unseen compartments after observing only a small number of training examples. Our results are the most accurate subcellular localization classifications to date, and demonstrate the usefulness of deep learning for high-throughput microscopy.

  7. Multiple Fuzzy Classification Systems

    CERN Document Server

    Scherer, Rafał

    2012-01-01

    Fuzzy classifiers are important tools in exploratory data analysis, which is a vital set of methods used in various engineering, scientific and business applications. Fuzzy classifiers use fuzzy rules and do not require assumptions common to statistical classification. Rough set theory is useful when data sets are incomplete. It defines a formal approximation of crisp sets by providing the lower and the upper approximation of the original set. Systems based on rough sets have natural ability to work on such data and incomplete vectors do not have to be preprocessed before classification. To achieve better performance than existing machine learning systems, fuzzy classifiers and rough sets can be combined in ensembles. Such ensembles consist of a finite set of learning models, usually weak learners. The present book discusses the three aforementioned fields – fuzzy systems, rough sets and ensemble techniques. As the trained ensemble should represent a single hypothesis, a lot of attention is placed o...

  8. Search techniques in intelligent classification systems

    CERN Document Server

    Savchenko, Andrey V

    2016-01-01

    A unified methodology for categorizing various complex objects is presented in this book. Through probability theory, novel asymptotically minimax criteria suitable for practical applications in imaging and data analysis are examined including the special cases such as the Jensen-Shannon divergence and the probabilistic neural network. An optimal approximate nearest neighbor search algorithm, which allows faster classification of databases is featured. Rough set theory, sequential analysis and granular computing are used to improve performance of the hierarchical classifiers. Practical examples in face identification (including deep neural networks), isolated commands recognition in voice control system and classification of visemes captured by the Kinect depth camera are included. This approach creates fast and accurate search procedures by using exact probability densities of applied dissimilarity measures. This book can be used as a guide for independent study and as supplementary material for a technicall...

  9. Accurate and reliable cancer classification based on probabilistic inference of pathway activity.

    Directory of Open Access Journals (Sweden)

    Junjie Su

    Full Text Available With the advent of high-throughput technologies for measuring genome-wide expression profiles, a large number of methods have been proposed for discovering diagnostic markers that can accurately discriminate between different classes of a disease. However, factors such as the small sample size of typical clinical data, the inherent noise in high-throughput measurements, and the heterogeneity across different samples, often make it difficult to find reliable gene markers. To overcome this problem, several studies have proposed the use of pathway-based markers, instead of individual gene markers, for building the classifier. Given a set of known pathways, these methods estimate the activity level of each pathway by summarizing the expression values of its member genes, and use the pathway activities for classification. It has been shown that pathway-based classifiers typically yield more reliable results compared to traditional gene-based classifiers. In this paper, we propose a new classification method based on probabilistic inference of pathway activities. For a given sample, we compute the log-likelihood ratio between different disease phenotypes based on the expression level of each gene. The activity of a given pathway is then inferred by combining the log-likelihood ratios of the constituent genes. We apply the proposed method to the classification of breast cancer metastasis, and show that it achieves higher accuracy and identifies more reproducible pathway markers compared to several existing pathway activity inference methods.

  10. BIOPHARMACEUTICAL CLASSIFICATION SYSTEM AND BIOWAVER: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    Puranik Prashant K

    2011-05-01

    Full Text Available The biopharmaceutical classification system (BCS has been developed to provide a scientific approach for classifying drug compounds based on solubility as related to dose and intestinal permeability in combination with the dissolution properties of the oral immediate release dosage form. BCS is to provide a regulatory tool for replacing certain bioequivalence (BE studies by accurate in vitro dissolution tests. This review gives three dimensionless numbers which are used in BCS are absorption number, dissolution number, dose number.Biowaver is an important tool for formulation development. Bioavailability (BA and BE play a central role in pharmaceutical product development, and BE studies are presently being conducted for New Drug Applications (NDAs of new compounds, in supplementary NDAs for new medical indications and product line extensions, in Abbreviated New Drug Applications (ANDAs of generic products, and in applications for scale-up and post-approval changes. The principles of the BCS classification system can be applied to NDA and ANDA approvals as well as to scale-up and post approval changes in drug manufacturing. BCS classification can therefore save pharmaceutical companies a significant amount in development time and reduce costs. The aim of the present review is to present the status of BCS and discuss its future application in pharmaceutical product development.

  11. Photometric brown-dwarf classification. I. A method to identify and accurately classify large samples of brown dwarfs without spectroscopy

    CERN Document Server

    Skrzypek, Nathalie; Faherty, Jacqueline K; Mortlock, Daniel J; Burgasser, Adam J; Hewett, Paul C

    2014-01-01

    Aims. We present a method, named photo-type, to identify and accurately classify L and T dwarfs onto the standard spectral classification system using photometry alone. This enables the creation of large and deep homogeneous samples of these objects efficiently, without the need for spectroscopy. Methods. We created a catalogue of point sources with photometry in 8 bands, ranging from 0.75 to 4.6 microns, selected from an area of 3344 deg^2, by combining SDSS, UKIDSS LAS, and WISE data. Sources with 13.0 0.8, were then classified by comparison against template colours of quasars, stars, and brown dwarfs. The L and T templates, spectral types L0 to T8, were created by identifying previously known sources with spectroscopic classifications, and fitting polynomial relations between colour and spectral type. Results. Of the 192 known L and T dwarfs with reliable photometry in the surveyed area and magnitude range, 189 are recovered by our selection and classification method. We have quantified the accuracy of th...

  12. Separation of Benign and Malicious Network Events for Accurate Malware Family Classification

    Science.gov (United States)

    2015-09-28

    Perdisci, D. Dagon, W. Lee, and N. Feamster, “Building a dynamic reputation system for dns ,” in USENIX Security , 2010. [24] M. Antonakakis, R. Perdisci...W. Lee, N. V. II, and D. Dagon, “Detecting malware domains at the upper dns hierarchy,” in USENIX Security , 2011. [25] R. Perdisci, A. Lanzi, and W...ABSTRACT 16. SECURITY CLASSIFICATION OF: Labeling malware samples with their appropriate malware family helps understand and track malware evolution and

  13. Classification of Magnetic Nanoparticle Systems

    DEFF Research Database (Denmark)

    Bogren, Sara; Fornara, Andrea; Ludwig, Frank

    2015-01-01

    This study presents classification of different magnetic single- and multi-core particle systems using their measured dynamic magnetic properties together with their nanocrystal and particle sizes. The dynamic magnetic properties are measured with AC (dynamical) susceptometry and magnetorelaxomet...... the four year EU NMP FP7 project, NanoMag, which is focused on standardization of analysis methods for magnetic nanoparticles....... and the size parameters are determined from electron microscopy and dynamic light scattering. Using these methods, we also show that the nanocrystal size and particle morphology determines the dynamic magnetic properties for both single- and multi-core particles. The presented results are obtained from...

  14. Platelet-rich plasma: the PAW classification system.

    Science.gov (United States)

    DeLong, Jeffrey M; Russell, Ryan P; Mazzocca, Augustus D

    2012-07-01

    Platelet-rich plasma (PRP) has been the subject of hundreds of publications in recent years. Reports of its effects in tissue, both positive and negative, have generated great interest in the orthopaedic community. Protocols for PRP preparation vary widely between authors and are often not well documented in the literature, making results difficult to compare or replicate. A classification system is needed to more accurately compare protocols and results and effectively group studies together for meta-analysis. Although some classification systems have been proposed, no single system takes into account the multitude of variables that determine the efficacy of PRP. In this article we propose a simple method for organizing and comparing results in the literature. The PAW classification system is based on 3 components: (1) the absolute number of Platelets, (2) the manner in which platelet Activation occurs, and (3) the presence or absence of White cells. By analyzing these 3 variables, we are able to accurately compare publications.

  15. The Road Ahead for Library Classification Systems.

    Science.gov (United States)

    Mitchell, Joan S.

    1997-01-01

    Discusses knowledge organization tools in the context of seven challenges facing library classification systems. Highlights include revisions to the Dewey Decimal Classification, the Windows-based CD-ROM version of Dewey, support for machine-assisted classification, multilingual use of Dewey, use of Dewey as a general knowledge organization and…

  16. Accurate HEp-2 cell classification based on sparse bag of words coding.

    Science.gov (United States)

    Ensafi, Shahab; Lu, Shijian; Kassim, Ashraf A; Tan, Chew Lim

    2017-04-01

    Autoimmune diseases (AD) are the abnormal response of the immune system of the body to healthy tissues. ADs have generally been on the increase. Efficient computer aided diagnosis of ADs through classification of the human epithelial type 2 (HEp-2) cells become beneficial. These methods make lower diagnosis costs, faster response and better diagnosis repeatability. In this paper, we present an automated HEp-2 cell image classification technique that exploits the sparse coding of the visual features together with the Bag of Words model (SBoW). In particular, SURF (Speeded Up Robust Features) and SIFT (Scale-invariant feature transform) features are specially integrated to work in a complementary fashion. This method helps greatly improve the cell classification accuracy. Additionally, a hierarchical max-pooling method is proposed to aggregate the local sparse codes in different layers to provide final feature vector. Furthermore, various parameters of the dictionary learning including the dictionary size, the learning iteration number, and the pooling strategy is also investigated. Experiments conducted on publicly available datasets show that the proposed technique clearly outperforms state-of-the-art techniques in cell and specimen levels. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Inter-rater reliability of the EPUAP pressure ulcer classification system using photographs.

    NARCIS (Netherlands)

    Defloor, T.; Schoonhoven, L.

    2004-01-01

    BACKGROUND: Many classification systems for grading pressure ulcers are discussed in the literature. Correct identification and classification of a pressure ulcer is important for accurate reporting of the magnitude of the problem, and for timely prevention. The reliability of pressure ulcer classif

  18. Autoclass: An automatic classification system

    Science.gov (United States)

    Stutz, John; Cheeseman, Peter; Hanson, Robin

    1991-01-01

    The task of inferring a set of classes and class descriptions most likely to explain a given data set can be placed on a firm theoretical foundation using Bayesian statistics. Within this framework, and using various mathematical and algorithmic approximations, the AutoClass System searches for the most probable classifications, automatically choosing the number of classes and complexity of class descriptions. A simpler version of AutoClass has been applied to many large real data sets, has discovered new independently-verified phenomena, and has been released as a robust software package. Recent extensions allow attributes to be selectively correlated within particular classes, and allow classes to inherit, or share, model parameters through a class hierarchy. The mathematical foundations of AutoClass are summarized.

  19. Classification system to describe workpieces definitions

    CERN Document Server

    Macconnell, W R

    2013-01-01

    A Classification System to Describe Workpieces provides information pertinent to the fundamental aspects and principles of coding. This book discusses the various applications of the classification system of coding.Organized into three chapters, this book begins with an overview of the requirements of a system of classification pertaining adequately and equally to design, production, and work planning. This text then examines the purpose of the classification system in production to determine the most suitable means of machining a component. Other chapters consider the optimal utilization of m

  20. AOSpine subaxial cervical spine injury classification system

    NARCIS (Netherlands)

    Vaccaro, Alexander R.; Koerner, John D.; Radcliff, Kris E.; Oner, F. Cumhur; Reinhold, Maximilian; Schnake, Klaus J.; Kandziora, Frank; Fehlings, Michael G.; Dvorak, Marcel F.; Aarabi, Bizhan; Rajasekaran, Shanmuganathan; Schroeder, Gregory D.; Kepler, Christopher K.; Vialle, Luiz R.

    2016-01-01

    Purpose: This project describes a morphology-based subaxial cervical spine traumatic injury classification system. Using the same approach as the thoracolumbar system, the goal was to develop a comprehensive yet simple classification system with high intra- and interobserver reliability to be used

  1. AOSpine subaxial cervical spine injury classification system

    NARCIS (Netherlands)

    Vaccaro, Alexander R.; Koerner, John D.; Radcliff, Kris E.; Oner, F. Cumhur|info:eu-repo/dai/nl/188615326; Reinhold, Maximilian; Schnake, Klaus J.; Kandziora, Frank; Fehlings, Michael G.; Dvorak, Marcel F.; Aarabi, Bizhan; Rajasekaran, Shanmuganathan; Schroeder, Gregory D.; Kepler, Christopher K.; Vialle, Luiz R.

    2016-01-01

    Purpose: This project describes a morphology-based subaxial cervical spine traumatic injury classification system. Using the same approach as the thoracolumbar system, the goal was to develop a comprehensive yet simple classification system with high intra- and interobserver reliability to be used f

  2. Genetic classification of petroleum systems

    Energy Technology Data Exchange (ETDEWEB)

    Demaison, G. (Stanford Univ., CA (United States)); Huizinga, B.J. (Chevron Overseas Petroleum Inc., San Ramon, CA (United States))

    1991-10-01

    The authors classification so petroleum systems is founded on a simple working nomenclature that consists of combining qualifiers from each of the following three categories: (1) charge factor, (2) migration drainage style, and (3) entrapment style. The charge factor is estimated on the basis of the richness and volumetrics of mature source rocks. The source potential index (SPI), which combines source-rock richness and thickness into a single parameter, is a convenient shortcut for comparing the petroleum potential of diverse source rocks containing dissimilar kerogen types and for rapidly estimating regional charging capacity. The migration drainage style is determined from the structural and stratigraphic framework of a basin. Vertical-migration drainage, which occurs mainly through faults and fracture systems breaching a seal, is characteristic of petroleum systems contained within rift basins, deltaic sequences, salt-dome provinces, wrench basins, and fold-and-thrust belts. In contrast, lateral-migration drainage sequences, salt-dome provinces, wrench basins, and fold-and-thrust belts. In contrast, lateral-migration drainage is dominant wherever stratigraphically continuous seal-reservoir doublets extend over a very large area in tectonically stable province. The entrapment style, which is also dependent on the structural framework and the presence and effectiveness of seals, describes the degree of resistance working against dispersion of the petroleum charge. Application of these working concepts should help to significantly reduce geologic risk, particularly in news ventures-type exploration.

  3. The International Classification of Headache Disorders: accurate diagnosis of orofacial pain?

    Science.gov (United States)

    Benoliel, R; Birman, N; Eliav, E; Sharav, Y

    2008-07-01

    The aim was to apply diagnostic criteria, as published by the International Headache Society (IHS), to the diagnosis of orofacial pain. A total of 328 consecutive patients with orofacial pain were collected over a period of 2 years. The orofacial pain clinic routinely employs criteria published by the IHS, the American Academy of Orofacial Pain (AAOP) and the Research Diagnostic Criteria for Temporomandibular Disorders (RDCTMD). Employing IHS criteria, 184 patients were successfully diagnosed (56%), including 34 with persistent idiopathic facial pain. In the remaining 144 we applied AAOP/RDCTMD criteria and diagnosed 120 as masticatory myofascial pain (MMP) resulting in a diagnostic efficiency of 92.7% (304/328) when applying the three classifications (IHS, AAOP, RDCTMD). Employing further published criteria, 23 patients were diagnosed as neurovascular orofacial pain (NVOP, facial migraine) and one as a neuropathy secondary to connective tissue disease. All the patients were therefore allocated to predefined diagnoses. MMP is clearly defined by AAOP and the RDCTMD. However, NVOP is not defined by any of the above classification systems. The features of MMP and NVOP are presented and analysed with calculations for positive (PPV) and negative predictive values (NPV). In MMP the combination of facial pain aggravated by jaw movement, and the presence of three or more tender muscles resulted in a PPV = 0.82 and a NPV = 0.86. For NVOP the combination of facial pain, throbbing quality, autonomic and/or systemic features and attack duration of > 60 min gave a PPV = 0.71 and a NPV = 0.95. Expansion of the IHS system is needed so as to integrate more orofacial pain syndromes.

  4. STUDY ON CLASSIFICATION SYSTEM FOR CHINESE COAL

    Institute of Scientific and Technical Information of China (English)

    陈鹏

    1998-01-01

    An integrated coal classification system-technical/commercial and scientific/geneticclassification in China is discussed in this paper. This system shall enable producers, sellers andpurchasers to communicate unambiguously with regard to the quality of coal complying with therequirements of the respective application. The determination of perfect coal classification systemis an important measure for rational utilization of coal resources.

  5. Ontology-Based Classification System Development Methodology

    Directory of Open Access Journals (Sweden)

    Grabusts Peter

    2015-12-01

    Full Text Available The aim of the article is to analyse and develop an ontology-based classification system methodology that uses decision tree learning with statement propositionalized attributes. Classical decision tree learning algorithms, as well as decision tree learning with taxonomy and propositionalized attributes have been observed. Thus, domain ontology can be extracted from the data sets and can be used for data classification with the help of a decision tree. The use of ontology methods in decision tree-based classification systems has been researched. Using such methodologies, the classification accuracy in some cases can be improved.

  6. Bilateral weighted radiographs are required for accurate classification of acromioclavicular separation: an observational study of 59 cases.

    Science.gov (United States)

    Ibrahim, E F; Forrest, N P; Forester, A

    2015-10-01

    Misinterpretation of the Rockwood classification system for acromioclavicular joint (ACJ) separations has resulted in a trend towards using unilateral radiographs for grading. Further, the use of weighted views to 'unmask' a grade III injury has fallen out of favour. Recent evidence suggests that many radiographic grade III injuries represent only a partial injury to the stabilising ligaments. This study aimed to determine (1) whether accurate classification is possible on unilateral radiographs and (2) the efficacy of weighted bilateral radiographs in unmasking higher-grade injuries. Complete bilateral non-weighted and weighted sets of radiographs for patients presenting with an acromioclavicular separation over a 10-year period were analysed retrospectively, and they were graded I-VI according to Rockwood's criteria. Comparison was made between grading based on (1) a single antero-posterior (AP) view of the injured side, (2) bilateral non-weighted views and (3) bilateral weighted views. Radiographic measurements for cases that changed grade after weighted views were statistically compared to see if this could have been predicted beforehand. Fifty-nine sets of radiographs on 59 patients (48 male, mean age of 33 years) were included. Compared with unilateral radiographs, non-weighted bilateral comparison films resulted in a grade change for 44 patients (74.5%). Twenty-eight of 56 patients initially graded as I, II or III were upgraded to grade V and two of three initial grade V patients were downgraded to grade III. The addition of a weighted view further upgraded 10 patients to grade V. No grade II injury was changed to grade III and no injury of any severity was downgraded by a weighted view. Grade III injuries upgraded on weighted views had a significantly greater baseline median percentage coracoclavicular distance increase than those that were not upgraded (80.7% vs. 55.4%, p=0.015). However, no cut-off point for this value could be identified to predict an

  7. Music Genre Classification Systems - A Computational Approach

    OpenAIRE

    Ahrendt, Peter; Hansen, Lars Kai

    2006-01-01

    Automatic music genre classification is the classification of a piece of music into its corresponding genre (such as jazz or rock) by a computer. It is considered to be a cornerstone of the research area Music Information Retrieval (MIR) and closely linked to the other areas in MIR. It is thought that MIR will be a key element in the processing, searching and retrieval of digital music in the near future. This dissertation is concerned with music genre classification systems and in particular...

  8. Gender Classification by Fuzzy Inference System

    OpenAIRE

    2013-01-01

    Gender classification from face images has many applications and is thus an important research topic. This paper presents an approach to gender classification based on shape and texture information gathered to design a fuzzy decision making system. Beside face shape features, Zernik moments are applied as system inputs to improve the system output which is considered as the probability of being male face image. After parameters tuning of the proposed fuzzy decision making system, 85.05% class...

  9. Discriminant forest classification method and system

    Science.gov (United States)

    Chen, Barry Y.; Hanley, William G.; Lemmond, Tracy D.; Hiller, Lawrence J.; Knapp, David A.; Mugge, Marshall J.

    2012-11-06

    A hybrid machine learning methodology and system for classification that combines classical random forest (RF) methodology with discriminant analysis (DA) techniques to provide enhanced classification capability. A DA technique which uses feature measurements of an object to predict its class membership, such as linear discriminant analysis (LDA) or Andersen-Bahadur linear discriminant technique (AB), is used to split the data at each node in each of its classification trees to train and grow the trees and the forest. When training is finished, a set of n DA-based decision trees of a discriminant forest is produced for use in predicting the classification of new samples of unknown class.

  10. Gender Classification by Fuzzy Inference System

    Directory of Open Access Journals (Sweden)

    Payman Moallem

    2013-02-01

    Full Text Available Gender classification from face images has many applications and is thus an important research topic. This paper presents an approach to gender classification based on shape and texture information gathered to design a fuzzy decision making system. Beside face shape features, Zernik moments are applied as system inputs to improve the system output which is considered as the probability of being male face image. After parameters tuning of the proposed fuzzy decision making system, 85.05% classification rate on the FERET face database (including 1199 individuals from different poses and facial expressions shows acceptable results compare to other methods.

  11. Music Genre Classification Systems - A Computational Approach

    DEFF Research Database (Denmark)

    Ahrendt, Peter

    2006-01-01

    Automatic music genre classification is the classification of a piece of music into its corresponding genre (such as jazz or rock) by a computer. It is considered to be a cornerstone of the research area Music Information Retrieval (MIR) and closely linked to the other areas in MIR. It is thought...... that MIR will be a key element in the processing, searching and retrieval of digital music in the near future. This dissertation is concerned with music genre classification systems and in particular systems which use the raw audio signal as input to estimate the corresponding genre. This is in contrast...... to systems which use e.g. a symbolic representation or textual information about the music. The approach to music genre classification systems has here been system-oriented. In other words, all the different aspects of the systems have been considered and it is emphasized that the systems should...

  12. Mapping a classification system to architectural education

    DEFF Research Database (Denmark)

    Hermund, Anders; Klint, Lars; Rostrup, Nicolai

    2015-01-01

    This paper examines to what extent a new classification system, Cuneco Classification System, CCS, proves useful in the education of architects, and to what degree the aim of an architectural education, rather based on an arts and crafts approach than a polytechnic approach, benefits from...... the distinct terminology of the classification system. The method used to examine the relationship between education, practice and the CCS bifurcates in a quantitative and a qualitative exploration: Quantitative comparison of the curriculum with the students’ own descriptions of their studies through...

  13. Fuzzy Aspect Based Opinion Classification System for Mining Tourist Reviews

    Directory of Open Access Journals (Sweden)

    Muhammad Afzaal

    2016-01-01

    Full Text Available Due to the large amount of opinions available on the websites, tourists are often overwhelmed with information and find it extremely difficult to use the available information to make a decision about the tourist places to visit. A number of opinion mining methods have been proposed in the past to identify and classify an opinion into positive or negative. Recently, aspect based opinion mining has been introduced which targets the various aspects present in the opinion text. A number of existing aspect based opinion classification methods are available in the literature but very limited research work has targeted the automatic aspect identification and extraction of implicit, infrequent, and coreferential aspects. Aspect based classification suffers from the presence of irrelevant sentences in a typical user review. Such sentences make the data noisy and degrade the classification accuracy of the machine learning algorithms. This paper presents a fuzzy aspect based opinion classification system which efficiently extracts aspects from user opinions and perform near to accurate classification. We conducted experiments on real world datasets to evaluate the effectiveness of our proposed system. Experimental results prove that the proposed system not only is effective in aspect extraction but also improves the classification accuracy.

  14. Land Cover - Minnesota Land Cover Classification System

    Data.gov (United States)

    Minnesota Department of Natural Resources — Land cover data set based on the Minnesota Land Cover Classification System (MLCCS) coding scheme. This data was produced using a combination of aerial photograph...

  15. Computer-aided pattern classification system for dermoscopy images.

    Science.gov (United States)

    Abbas, Qaisar; Celebi, M Emre; Fondón, Irene

    2012-08-01

    Computer-aided pattern classification of melanoma and other pigmented skin lesions is one of the most important tasks for clinical diagnosis. To differentiate between benign and malignant lesions, the extraction of color, architectural order, symmetry of pattern and homogeneity (CASH) is a challenging task. In this article, a novel pattern classification system (PCS) based on the clinical CASH rule is presented to classify among six classes of patterns. The PCS system consists of the following five steps: transformation to the CIE L*a*b* color space, pre-processing to enhance the tumor region and removal of hairs, tumor-area segmentation, color and texture feature extraction, and finally, classification based on a multiclass support vector machine. The PCS system is tested on a total of 180 dermoscopic images. To test the performance of the PCS diagnostic classifier, the area under the receiver operating characteristics curve (AUC) is utilized. The proposed classifier achieved a sensitivity of 91.64%, specificity of 94.14%, and AUC of 0.948. The experimental results demonstrate that the proposed pattern classifier is highly accurate and classify between benign and malignant lesions into some extend. The PCS method is fully automatic and can accurately detect different patterns from dermoscopy images using color and texture properties. Additional pattern features can be included to investigate the impact of pattern classification based on the CASH rule. © 2011 John Wiley & Sons A/S.

  16. A statistical approach to root system classification.

    Directory of Open Access Journals (Sweden)

    Gernot eBodner

    2013-08-01

    Full Text Available Plant root systems have a key role in ecology and agronomy. In spite of fast increase in root studies, still there is no classification that allows distinguishing among distinctive characteristics within the diversity of rooting strategies. Our hypothesis is that a multivariate approach for plant functional type identification in ecology can be applied to the classification of root systems. We demonstrate that combining principal component and cluster analysis yields a meaningful classification of rooting types based on morphological traits. The classification method presented is based on a data-defined statistical procedure without a priori decision on the classifiers. Biplot inspection is used to determine key traits and to ensure stability in cluster based grouping. The classification method is exemplified with simulated root architectures and morphological field data. Simulated root architectures showed that morphological attributes with spatial distribution parameters capture most distinctive features within root system diversity. While developmental type (tap vs. shoot-borne systems is a strong, but coarse classifier, topological traits provide the most detailed differentiation among distinctive groups. Adequacy of commonly available morphologic traits for classification is supported by field data. Three rooting types emerged from measured data, distinguished by diameter/weight, density and spatial distribution respectively. Similarity of root systems within distinctive groups was the joint result of phylogenetic relation and environmental as well as human selection pressure. We concluded that the data-define classification is appropriate for integration of knowledge obtained with different root measurement methods and at various scales. Currently root morphology is the most promising basis for classification due to widely used common measurement protocols. To capture details of root diversity efforts in architectural measurement

  17. Generating Interpretable Fuzzy Systems for Classification Problems

    Directory of Open Access Journals (Sweden)

    Juan A. Contreras-Montes

    2009-12-01

    Full Text Available This paper presents a new method to generate interpretable fuzzy systems from training data to deal with classification problems. The antecedent partition uses triangular sets with 0.5 interpolations avoiding the presence of complex overlapping that happens in another method. Singleton consequents are generated form the projection of the modal values of each triangular membership function into the output space. Least square method is used to adjust the consequents. The proposed method gets a higher average classification accuracy rate than the existing methods with a reduced number of rules andparameters and without sacrificing the fuzzy system interpretability. The proposed approach is applied to two classical classification problems: Iris data and the Wisconsin Breast Cancer classification problem.

  18. Ontology-Based Classification System Development Methodology

    OpenAIRE

    2015-01-01

    The aim of the article is to analyse and develop an ontology-based classification system methodology that uses decision tree learning with statement propositionalized attributes. Classical decision tree learning algorithms, as well as decision tree learning with taxonomy and propositionalized attributes have been observed. Thus, domain ontology can be extracted from the data sets and can be used for data classification with the help of a decision tree. The use of ontology methods in decision ...

  19. Classification

    Science.gov (United States)

    Clary, Renee; Wandersee, James

    2013-01-01

    In this article, Renee Clary and James Wandersee describe the beginnings of "Classification," which lies at the very heart of science and depends upon pattern recognition. Clary and Wandersee approach patterns by first telling the story of the "Linnaean classification system," introduced by Carl Linnacus (1707-1778), who is…

  20. Inter-rater reliability of the EPUAP pressure ulcer classification system using photographs.

    NARCIS (Netherlands)

    Defloor, T.; Schoonhoven, L.

    2004-01-01

    BACKGROUND: Many classification systems for grading pressure ulcers are discussed in the literature. Correct identification and classification of a pressure ulcer is important for accurate reporting of the magnitude of the problem, and for timely prevention. The reliability of pressure ulcer

  1. Optimizing Mining Association Rules for Artificial Immune System based Classification

    Directory of Open Access Journals (Sweden)

    SAMEER DIXIT

    2011-08-01

    candidate rules and incorporating these rules in the classification process. The rule search process is also computationally expensive for the small support threshold values which plays very important role in building an accurate classifier.The artificial immune system (AIS uses powerful information capabilities of the immune system such as feature extraction, learning pattern recognition etc. The clonal selection algorithm of artificial immune system uses the population-based search model of evolutionary computation algorithms that have the capability of dealing with a complex search space.The clonal selection algorithm has good features for searching and optimization. In this work, we studied and optimised an artificial immune system based classification system. We evaluated the performance of the AIS based classification system by computing accuracy at different clonal factors and varying number of generations. We used three standard datasets to compute the accuracy.Experimentally, we find that the system gives highest accuracy with clonal factor 0.4.

  2. A statistical approach to root system classification.

    Science.gov (United States)

    Bodner, Gernot; Leitner, Daniel; Nakhforoosh, Alireza; Sobotik, Monika; Moder, Karl; Kaul, Hans-Peter

    2013-01-01

    Plant root systems have a key role in ecology and agronomy. In spite of fast increase in root studies, still there is no classification that allows distinguishing among distinctive characteristics within the diversity of rooting strategies. Our hypothesis is that a multivariate approach for "plant functional type" identification in ecology can be applied to the classification of root systems. The classification method presented is based on a data-defined statistical procedure without a priori decision on the classifiers. The study demonstrates that principal component based rooting types provide efficient and meaningful multi-trait classifiers. The classification method is exemplified with simulated root architectures and morphological field data. Simulated root architectures showed that morphological attributes with spatial distribution parameters capture most distinctive features within root system diversity. While developmental type (tap vs. shoot-borne systems) is a strong, but coarse classifier, topological traits provide the most detailed differentiation among distinctive groups. Adequacy of commonly available morphologic traits for classification is supported by field data. Rooting types emerging from measured data, mainly distinguished by diameter/weight and density dominated types. Similarity of root systems within distinctive groups was the joint result of phylogenetic relation and environmental as well as human selection pressure. We concluded that the data-define classification is appropriate for integration of knowledge obtained with different root measurement methods and at various scales. Currently root morphology is the most promising basis for classification due to widely used common measurement protocols. To capture details of root diversity efforts in architectural measurement techniques are essential.

  3. Calibration Techniques for Accurate Measurements by Underwater Camera Systems

    Directory of Open Access Journals (Sweden)

    Mark Shortis

    2015-12-01

    Full Text Available Calibration of a camera system is essential to ensure that image measurements result in accurate estimates of locations and dimensions within the object space. In the underwater environment, the calibration must implicitly or explicitly model and compensate for the refractive effects of waterproof housings and the water medium. This paper reviews the different approaches to the calibration of underwater camera systems in theoretical and practical terms. The accuracy, reliability, validation and stability of underwater camera system calibration are also discussed. Samples of results from published reports are provided to demonstrate the range of possible accuracies for the measurements produced by underwater camera systems.

  4. Calibration Techniques for Accurate Measurements by Underwater Camera Systems.

    Science.gov (United States)

    Shortis, Mark

    2015-12-07

    Calibration of a camera system is essential to ensure that image measurements result in accurate estimates of locations and dimensions within the object space. In the underwater environment, the calibration must implicitly or explicitly model and compensate for the refractive effects of waterproof housings and the water medium. This paper reviews the different approaches to the calibration of underwater camera systems in theoretical and practical terms. The accuracy, reliability, validation and stability of underwater camera system calibration are also discussed. Samples of results from published reports are provided to demonstrate the range of possible accuracies for the measurements produced by underwater camera systems.

  5. The Orchard Sports Injury Classification System (OSICS) version 10.

    Science.gov (United States)

    Rae, Katherine; Orchard, John

    2007-05-01

    Injury classification systems are generally used in sports medicine (1) to accurately classify diagnoses for summary studies, permitting easy grouping into parent categories for tabulation and (2) to create a database from which cases can be extracted for research on specific injuries. Clarity is most important for the first purpose, whereas diagnostic detail is particularly important for the second. An ideal classification system is versatile and appropriate for all sports and all data collection scenarios. The Orchard Sports Injury Classification System (OSICS) was developed in 1992 primarily for the first purpose, a specific study examining the incidence of injury at the elite level of football in Australia. As usage of the OSICS expanded into different sports, limitations were noted and therefore many revisions have been made. A recent study found the OSICS-8, whilst superior to the International Classification of Diseases Australian Modification (ICD-10-AM) in both speed of use and 3-coder agreement, still achieved a lower level of agreement than expected. The study also revealed weaknesses in the OSICS-8 that needed to be addressed. A recent major revision resulted in the development of the new 4-character OSICS-10. This revision attempts to improve interuser agreement, partly by including more diagnoses encountered in a sports medicine setting. The OSICS-10 should provide far greater depth in classifications for the benefit of those looking to maintain diagnostic information. It is also structured to easily collapse down into parent classifications for those wanting to preserve basic information only. For those researchers wanting information collected under broader injury headings, particularly those not using fully computerized systems, the simplicity of the OSICS-8 system may still suffice.

  6. Image-based Vehicle Classification System

    CERN Document Server

    Ng, Jun Yee

    2012-01-01

    Electronic toll collection (ETC) system has been a common trend used for toll collection on toll road nowadays. The implementation of electronic toll collection allows vehicles to travel at low or full speed during the toll payment, which help to avoid the traffic delay at toll road. One of the major components of an electronic toll collection is the automatic vehicle detection and classification (AVDC) system which is important to classify the vehicle so that the toll is charged according to the vehicle classes. Vision-based vehicle classification system is one type of vehicle classification system which adopt camera as the input sensing device for the system. This type of system has advantage over the rest for it is cost efficient as low cost camera is used. The implementation of vision-based vehicle classification system requires lower initial investment cost and very suitable for the toll collection trend migration in Malaysia from single ETC system to full-scale multi-lane free flow (MLFF). This project ...

  7. Classification of Dynamic Vehicle Routing Systems

    DEFF Research Database (Denmark)

    Larsen, Allan; Madsen, Oli B.G.; Solomon, Marius M.

    2007-01-01

    to classify dynamic vehicle routing systems. Methods for evaluation of the performance of algorithms that solve on-line routing problems are discussed and we list some of the most important issues to include in the system objective. Finally, we provide a three-echelon classification of dynamic vehicle routing...

  8. Mapping a classification system to architectural education

    DEFF Research Database (Denmark)

    Hermund, Anders; Klint, Lars; Rostrup, Nicolai

    2015-01-01

    a questionnaire survey among 88 students in graduate school. Qualitative interviews with a handful of practicing architects, to be able to cross check the relevance of the education with the profession. The examination indicates the need of a new definition, in addition to the CCS’s scale, covering the earliest......This paper examines to what extent a new classification system, Cuneco Classification System, CCS, proves useful in the education of architects, and to what degree the aim of an architectural education, rather based on an arts and crafts approach than a polytechnic approach, benefits from...... the distinct terminology of the classification system. The method used to examine the relationship between education, practice and the CCS bifurcates in a quantitative and a qualitative exploration: Quantitative comparison of the curriculum with the students’ own descriptions of their studies through...

  9. Myelodysplastic syndrome: classification and prognostic systems

    Directory of Open Access Journals (Sweden)

    Rosangela Invernizzi

    2011-12-01

    Full Text Available Myelodysplastic syndromes (MDS are acquired clonal disorders of hematopoiesis, that are characterized most frequently by normocellular or hypercellular bone marrow specimens, and maturation that is morphologically and functionally dysplastic. MDS constitute a complex hematological problem: differences in disease presentation, progression and outcome have made it necessary to use classification systems to improve diagnosis, prognostication and treatment selection. On the basis of new scientific and clinical information, classification and prognostic systems have recently been updated and minimal diagnostic criteria forMDS have been proposed by expert panels. In addition, in the last few years our ability to define the prognosis of the individual patient with MDS has improved. In this paper World Health Organization (WHO classification refinements and recent prognostic scoring systems for the definition of individual risk are highlighted and current criteria are discussed. The recommendations should facilitate diagnostic and prognostic evaluations in MDS and selection of patients for new effective targeted therapies.

  10. Classification algorithms with multi-modal data fusion could accurately distinguish neuromyelitis optica from multiple sclerosis.

    Science.gov (United States)

    Eshaghi, Arman; Riyahi-Alam, Sadjad; Saeedi, Roghayyeh; Roostaei, Tina; Nazeri, Arash; Aghsaei, Aida; Doosti, Rozita; Ganjgahi, Habib; Bodini, Benedetta; Shakourirad, Ali; Pakravan, Manijeh; Ghana'ati, Hossein; Firouznia, Kavous; Zarei, Mojtaba; Azimi, Amir Reza; Sahraian, Mohammad Ali

    2015-01-01

    Neuromyelitis optica (NMO) exhibits substantial similarities to multiple sclerosis (MS) in clinical manifestations and imaging results and has long been considered a variant of MS. With the advent of a specific biomarker in NMO, known as anti-aquaporin 4, this assumption has changed; however, the differential diagnosis remains challenging and it is still not clear whether a combination of neuroimaging and clinical data could be used to aid clinical decision-making. Computer-aided diagnosis is a rapidly evolving process that holds great promise to facilitate objective differential diagnoses of disorders that show similar presentations. In this study, we aimed to use a powerful method for multi-modal data fusion, known as a multi-kernel learning and performed automatic diagnosis of subjects. We included 30 patients with NMO, 25 patients with MS and 35 healthy volunteers and performed multi-modal imaging with T1-weighted high resolution scans, diffusion tensor imaging (DTI) and resting-state functional MRI (fMRI). In addition, subjects underwent clinical examinations and cognitive assessments. We included 18 a priori predictors from neuroimaging, clinical and cognitive measures in the initial model. We used 10-fold cross-validation to learn the importance of each modality, train and finally test the model performance. The mean accuracy in differentiating between MS and NMO was 88%, where visible white matter lesion load, normal appearing white matter (DTI) and functional connectivity had the most important contributions to the final classification. In a multi-class classification problem we distinguished between all of 3 groups (MS, NMO and healthy controls) with an average accuracy of 84%. In this classification, visible white matter lesion load, functional connectivity, and cognitive scores were the 3 most important modalities. Our work provides preliminary evidence that computational tools can be used to help make an objective differential diagnosis of NMO and MS.

  11. Classification algorithms with multi-modal data fusion could accurately distinguish neuromyelitis optica from multiple sclerosis

    Directory of Open Access Journals (Sweden)

    Arman Eshaghi

    2015-01-01

    Full Text Available Neuromyelitis optica (NMO exhibits substantial similarities to multiple sclerosis (MS in clinical manifestations and imaging results and has long been considered a variant of MS. With the advent of a specific biomarker in NMO, known as anti-aquaporin 4, this assumption has changed; however, the differential diagnosis remains challenging and it is still not clear whether a combination of neuroimaging and clinical data could be used to aid clinical decision-making. Computer-aided diagnosis is a rapidly evolving process that holds great promise to facilitate objective differential diagnoses of disorders that show similar presentations. In this study, we aimed to use a powerful method for multi-modal data fusion, known as a multi-kernel learning and performed automatic diagnosis of subjects. We included 30 patients with NMO, 25 patients with MS and 35 healthy volunteers and performed multi-modal imaging with T1-weighted high resolution scans, diffusion tensor imaging (DTI and resting-state functional MRI (fMRI. In addition, subjects underwent clinical examinations and cognitive assessments. We included 18 a priori predictors from neuroimaging, clinical and cognitive measures in the initial model. We used 10-fold cross-validation to learn the importance of each modality, train and finally test the model performance. The mean accuracy in differentiating between MS and NMO was 88%, where visible white matter lesion load, normal appearing white matter (DTI and functional connectivity had the most important contributions to the final classification. In a multi-class classification problem we distinguished between all of 3 groups (MS, NMO and healthy controls with an average accuracy of 84%. In this classification, visible white matter lesion load, functional connectivity, and cognitive scores were the 3 most important modalities. Our work provides preliminary evidence that computational tools can be used to help make an objective differential diagnosis

  12. Genetic classification of petroleum systems

    Energy Technology Data Exchange (ETDEWEB)

    Huizinga, B.J. (Chevron Oil Field Research Co., Richmond, CA (United States)); Demaison, G.

    1991-03-01

    The authors genetic classification of petroleum basins is founded on a working nomenclature that consists of combining qualifiers from each of the following three categories: (1) the charge factor (supercharged, normally charged, or undercharged), (2) the migration drainage style (vertically drained or laterally drained), and (3) the entrapment style (high impedance or low impedance). The charge factor is estimated on the basis of the richness and volumetrics of mature source rocks. The source potential index (SPI), which combines source-rock richness and thickness into a single parameter, is a convenient shortcut for comparing the petroleum potential of different source rocks containing dissimilar kerogen types and for rapidly estimating a basin's regional charging capacity. On a global scale, a general correlation exists between the magnitude of SPI and basinwide petroleum reserves. The dominant migration drainage style can be predicted from the structural and stratigraphic framework of a basin. Recognition of the dominant migration style helps to predict the location of zones of petroleum occurrence in relation to the 'hydrocarbon kitchens.' The entrapment style, which is also dependent on the structural framework and the presence of seals, describes the degree of resistance (i.e. impedance) working against dispersion of the petroleum charge. Application of these working concepts should help significantly reduce geologic risk, particularly in new ventures-type exploration.

  13. Updated Classification System for Proximal Humeral Fractures

    Science.gov (United States)

    Guix, José M. Mora; Pedrós, Juan Sala; Serrano, Alejandro Castaño

    2009-01-01

    Proximal humeral fractures can restrict daily activities and, therefore, deserve efficient diagnoses that minimize complications and sequels. For good diagnosis and treatment, patient characteristics, variability in the forms of the fractures presented, and the technical difficulties in achieving fair results with surgical treatment should all be taken into account. Current classification systems for these fractures are based on anatomical and pathological principles, and not on systematic image reading. These fractures can appear in many different forms, with many characteristics that must be identified. However, many current classification systems lack good reliability, both inter-observer and intra-observer for different image types. A new approach to image reading, following a well-designed set and sequence of variables to check, is needed. We previously reported such an image reading system. In the present study, we report a classification system based on this image reading system. Here we define 21 fracture characteristics and apply them along with classical Codman approaches to classify fractures. We base this novel classification system for classifying proximal humeral fractures on a review of scientific literature and improvements to our image reading protocol. Patient status, fracture characteristics and surgeon circumstances have been important issues in developing this system. PMID:19574487

  14. 42 CFR 412.513 - Patient classification system.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Patient classification system. 412.513 Section 412... Long-Term Care Hospitals § 412.513 Patient classification system. (a) Classification methodology. CMS... LTC-DRG classification system provides a LTC-DRG, and an appropriate weighting factor, for those...

  15. Accurate parameter estimation for unbalanced three-phase system.

    Science.gov (United States)

    Chen, Yuan; So, Hing Cheung

    2014-01-01

    Smart grid is an intelligent power generation and control console in modern electricity networks, where the unbalanced three-phase power system is the commonly used model. Here, parameter estimation for this system is addressed. After converting the three-phase waveforms into a pair of orthogonal signals via the α β-transformation, the nonlinear least squares (NLS) estimator is developed for accurately finding the frequency, phase, and voltage parameters. The estimator is realized by the Newton-Raphson scheme, whose global convergence is studied in this paper. Computer simulations show that the mean square error performance of NLS method can attain the Cramér-Rao lower bound. Moreover, our proposal provides more accurate frequency estimation when compared with the complex least mean square (CLMS) and augmented CLMS.

  16. Accurate Medium-Term Wind Power Forecasting in a Censored Classification Framework

    DEFF Research Database (Denmark)

    Dahl, Christian M.; Croonenbroeck, Carsten

    2014-01-01

    We provide a wind power forecasting methodology that exploits many of the actual data's statistical features, in particular both-sided censoring. While other tools ignore many of the important “stylized facts” or provide forecasts for short-term horizons only, our approach focuses on medium......-term forecasts, which are especially necessary for practitioners in the forward electricity markets of many power trading places; for example, NASDAQ OMX Commodities (formerly Nord Pool OMX Commodities) in northern Europe. We show that our model produces turbine-specific forecasts that are significantly more...... accurate in comparison to established benchmark models and present an application that illustrates the financial impact of more accurate forecasts obtained using our methodology....

  17. Accurate and Simple Calibration of DLP Projector Systems

    OpenAIRE

    Wilm, Jakob; Olesen, Oline Vinter; Larsen, Rasmus

    2014-01-01

    Much work has been devoted to the calibration of optical cameras, and accurate and simple methods are now available which require only a small number of calibration targets. The problem of obtaining these parameters for light projectors has not been studied as extensively and most current methods require a camera and involve feature extraction from a known projected pattern. In this work we present a novel calibration technique for DLP Projector systems based on phase shifting profilometry pr...

  18. Classification and Importance of Intrusion Detection System

    Directory of Open Access Journals (Sweden)

    Rajasekaran K

    2012-08-01

    Full Text Available An intrusion detection system (IDS is a device or software application that monitors network or system activities for malicious activities or policy violations and produces reports to a Management Station. Some systems may attempt to stop an intrusion attempt but this is neither required nor expected of a monitoring system. Due to a growing number of intrusion events and also because the Internet and local networks have become so ubiquitous, organizations are increasingly implementing various systems that monitor IT security breaches. This includes an overview of the classification of intrusion detection systems and introduces the reader to some fundamental concepts of IDS methodology: audit trail analysis and on-the-fly processing as well as anomaly detection and signature detection approaches. This research paper discusses the primary intrusion detection techniques and the classification of intrusion Detection system.

  19. Accurate classification of brain gliomas by discriminate dictionary learning based on projective dictionary pair learning of proton magnetic resonance spectra.

    Science.gov (United States)

    Adebileje, Sikiru Afolabi; Ghasemi, Keyvan; Aiyelabegan, Hammed Tanimowo; Saligheh Rad, Hamidreza

    2017-04-01

    Proton magnetic resonance spectroscopy is a powerful noninvasive technique that complements the structural images of cMRI, which aids biomedical and clinical researches, by identifying and visualizing the compositions of various metabolites within the tissues of interest. However, accurate classification of proton magnetic resonance spectroscopy is still a challenging issue in clinics due to low signal-to-noise ratio, overlapping peaks of metabolites, and the presence of background macromolecules. This paper evaluates the performance of a discriminate dictionary learning classifiers based on projective dictionary pair learning method for brain gliomas proton magnetic resonance spectroscopy spectra classification task, and the result were compared with the sub-dictionary learning methods. The proton magnetic resonance spectroscopy data contain a total of 150 spectra (74 healthy, 23 grade II, 23 grade III, and 30 grade IV) from two databases. The datasets from both databases were first coupled together, followed by column normalization. The Kennard-Stone algorithm was used to split the datasets into its training and test sets. Performance comparison based on the overall accuracy, sensitivity, specificity, and precision was conducted. Based on the overall accuracy of our classification scheme, the dictionary pair learning method was found to outperform the sub-dictionary learning methods 97.78% compared with 68.89%, respectively. Copyright © 2016 John Wiley & Sons, Ltd.

  20. Classification System for Mortgage Arrear Management

    NARCIS (Netherlands)

    Sun, Zhe; Wiering, Marco; Petkov, Nicolai

    2014-01-01

    Due to the economic recession in the recent years, more and more mortgage customers default on the payments. This brings tremendous losses to banks and forces their arrear management departments to develop more efficient processes. In this paper, we propose a classification system to predict the out

  1. Treatment response classification of liver metastatic disease evaluated on imaging. Are RECIST unidimensional measurements accurate?

    Science.gov (United States)

    Mantatzis, Michael; Kakolyris, Stylianos; Amarantidis, Kyriakos; Karayiannakis, Anastasios; Prassopoulos, Panos

    2009-07-01

    The purpose of this study was to evaluate the accuracy of unidimensional measurements (response evaluation criteria in solid tumors, RECIST) compared with volumetric measurements in patients with liver metastases undergoing chemotherapy. Forty-four patients with newly diagnosed liver lesions underwent three MRI examinations at treatment initiation, during chemotherapy, and immediately post-treatment. Measurements based on RECIST guidelines and volume calculations were performed on the "target" lesions (TLs). The two methods were in agreement in 64/77 of patients and 253/301 of individual lesions classification in response categories ("good" agreement, Cohen kappa = 0.735 and 0.741, respectively). In 16.88% of the comparisons the two methods stratified patients to a different response category; 27.6% of TLs did not follow the response category of the patient in whom lesions were located. The actual volume of TLs differs from the calculated volume of a sphere with the same diameter. Our study supports the use of volumetric techniques that may overcome certain disadvantages of unidimensional measurements.

  2. THE AVATARS OF HOTELS CLASSIFICATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Ana-Maria NICA

    2010-12-01

    Full Text Available As the needs and expectations of the clients evolved, stimulating the development of the hotel supply, the need for regulation of the activity domain became imperative, by adopting measures for protecting the rights and interests of final consumers or clients. To this end, the classification systems of accommodation structures are conceived and implemented, either compulsory or volunteer, officially statuated at national or regional level, consensually adopted at the level of hotel owners’ organizations or proposed by other entities, consecrated by unofficial recognition from the public. The realized research is an exploratory one, based on the collection of secondary sources.In Romania, from 1991, seven different sets of norms for star classification systems were adopted. Other example is Spain, where each of the 17 governments of the autonomous communities is entitled to adopt its own regulation. Confronted with the heterogeneity of classification systems in Europe, which affects consumers’ rights and interests for information, HOTREC, which is the confederation of hotel owners’ organizations in the European hospitality industry adopted, in 2009, a series of 21 principles regarding the establishment or revision of the national and regional hotel classification systems. In December 2009, in Prague, under the HOTREC patronage, organizations from seven countries (Germany, Austria, Hungary, Switzerland, Czech Republic, Sweden, and the Netherlands have announced the founding of the Hotelstars Union – a common system of hotel classification, which is already applied. It is expected that the number of the Hotelstars Union will increase. Nevertheless, there are voices against this attempt. What is the way Romania should choose?

  3. Common occupational classification system - revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Stahlman, E.J.; Lewis, R.E.

    1996-05-01

    Workforce planning has become an increasing concern within the DOE community as the Office of Environmental Restoration and Waste Management (ER/WM or EM) seeks to consolidate and refocus its activities and the Office of Defense Programs (DP) closes production sites. Attempts to manage the growth and skills mix of the EM workforce while retaining the critical skills of the DP workforce have been difficult due to the lack of a consistent set of occupational titles and definitions across the complex. Two reasons for this difficulty may be cited. First, classification systems commonly used in industry often fail to cover in sufficient depth the unique demands of DOE`s nuclear energy and research community. Second, the government practice of contracting the operation of government facilities to the private sector has introduced numerous contractor-specific classification schemes to the DOE complex. As a result, sites/contractors report their workforce needs using unique classification systems. It becomes difficult, therefore, to roll these data up to the national level necessary to support strategic planning and analysis. The Common Occupational Classification System (COCS) is designed to overcome these workforce planning barriers. The COCS is based on earlier workforce planning activities and the input of technical, workforce planning, and human resource managers from across the DOE complex. It provides a set of mutually-exclusive occupation titles and definitions that cover the broad range of activities present in the DOE complex. The COCS is not a required record-keeping or data management guide. Neither is it intended to replace contractor/DOE-specific classification systems. Instead, the system provides a consistent, high- level, functional structure of occupations to which contractors can crosswalk (map) their job titles.

  4. Classification of ERP System Services

    Directory of Open Access Journals (Sweden)

    Petr Sodomka

    2016-07-01

    Full Text Available Today the ERP business information systems are an essential tool for organization management, regardless of size and field of activity. Their successful implementation and use is conditioned predominantly by IS/ICT knowledge and managerial skills required for directing their life cycle correctly. Defining and correct setting of the service level is a key requirement and skill, usually provided by a service provider based on an implementation and service contract, or an advisory organization, in particular when presale services concerning analyses and tender documentation processing are provided. The following paper discusses the characteristics of the individual service types and the particulars of their practical use. Moreover, it presents the selected significant results of the long-term research performed by the authors in the Center for inVestigations into Information Systems.

  5. Accurate and simple calibration of DLP projector systems

    Science.gov (United States)

    Wilm, Jakob; Olesen, Oline V.; Larsen, Rasmus

    2014-03-01

    Much work has been devoted to the calibration of optical cameras, and accurate and simple methods are now available which require only a small number of calibration targets. The problem of obtaining these parameters for light projectors has not been studied as extensively and most current methods require a camera and involve feature extraction from a known projected pattern. In this work we present a novel calibration technique for DLP Projector systems based on phase shifting profilometry projection onto a printed calibration target. In contrast to most current methods, the one presented here does not rely on an initial camera calibration, and so does not carry over the error into projector calibration. A radial interpolation scheme is used to convert features coordinates into projector space, thereby allowing for a very accurate procedure. This allows for highly accurate determination of parameters including lens distortion. Our implementation acquires printed planar calibration scenes in less than 1s. This makes our method both fast and convenient. We evaluate our method in terms of reprojection errors and structured light image reconstruction quality.

  6. Accurate determination of heteroclinic orbits in chaotic dynamical systems

    Science.gov (United States)

    Li, Jizhou; Tomsovic, Steven

    2017-03-01

    Accurate calculation of heteroclinic and homoclinic orbits can be of significant importance in some classes of dynamical system problems. Yet for very strongly chaotic systems initial deviations from a true orbit will be magnified by a large exponential rate making direct computational methods fail quickly. In this paper, a method is developed that avoids direct calculation of the orbit by making use of the well-known stability property of the invariant unstable and stable manifolds. Under an area-preserving map, this property assures that any initial deviation from the stable (unstable) manifold collapses onto them under inverse (forward) iterations of the map. Using a set of judiciously chosen auxiliary points on the manifolds, long orbit segments can be calculated using the stable and unstable manifold intersections of the heteroclinic (homoclinic) tangle. Detailed calculations using the example of the kicked rotor are provided along with verification of the relation between action differences and certain areas bounded by the manifolds.

  7. A fast and accurate FPGA based QRS detection system.

    Science.gov (United States)

    Shukla, Ashish; Macchiarulo, Luca

    2008-01-01

    An accurate Field Programmable Gate Array (FPGA) based ECG Analysis system is described in this paper. The design, based on a popular software based QRS detection algorithm, calculates the threshold value for the next peak detection cycle, from the median of eight previously detected peaks. The hardware design has accuracy in excess of 96% in detecting the beats correctly when tested with a subset of five 30 minute data records obtained from the MIT-BIH Arrhythmia database. The design, implemented using a proprietary design tool (System Generator), is an extension of our previous work and uses 76% resources available in a small-sized FPGA device (Xilinx Spartan xc3s500), has a higher detection accuracy as compared to our previous design and takes almost half the analysis time in comparison to software based approach.

  8. A Void Reference Sensor-Multiple Signal Classification Algorithm for More Accurate Direction of Arrival Estimation of Low Altitude Target

    Institute of Scientific and Technical Information of China (English)

    XIAO Hui; SUN Jin-cai; YUAN Jun; NIU Yi-long

    2007-01-01

    There exists MUSIC (multiple signal classification) algorithm for direction of arrival (DOA) estimation. This paper is to present a different MUSIC algorithm for more accurate estimation of low altitude target. The possibility of better performance is analyzed using a void reference sensor (VRS) in MUSIC algorithm. The following two topics are discussed: 1) the time delay formula and VRS-MUSIC algorithm with VRS located on the minus of z-axes; 2) the DOA estimation results of VRS-MUSIC and MUSIC algorithms. The simulation results show VRS-MUSIC algorithm has three advantages compared with MUSIC: 1 ) When the signal to noise ratio (SNR) is more than - 5 dB, the direction estimation error is 1/2 as much as that obtained by MUSIC; 2) The side lobe is more lower and the stability is better; 3) The size of array that the algorithm requires is smaller.

  9. Intelligent Computer Vision System for Automated Classification

    Science.gov (United States)

    Jordanov, Ivan; Georgieva, Antoniya

    2010-05-01

    In this paper we investigate an Intelligent Computer Vision System applied for recognition and classification of commercially available cork tiles. The system is capable of acquiring and processing gray images using several feature generation and analysis techniques. Its functionality includes image acquisition, feature extraction and preprocessing, and feature classification with neural networks (NN). We also discuss system test and validation results from the recognition and classification tasks. The system investigation also includes statistical feature processing (features number and dimensionality reduction techniques) and classifier design (NN architecture, target coding, learning complexity and performance, and training with our own metaheuristic optimization method). The NNs trained with our genetic low-discrepancy search method (GLPτS) for global optimisation demonstrated very good generalisation abilities. In our view, the reported testing success rate of up to 95% is due to several factors: combination of feature generation techniques; application of Analysis of Variance (ANOVA) and Principal Component Analysis (PCA), which appeared to be very efficient for preprocessing the data; and use of suitable NN design and learning method.

  10. Classification framework for partially observed dynamical systems

    Science.gov (United States)

    Shen, Yuan; Tino, Peter; Tsaneva-Atanasova, Krasimira

    2017-04-01

    We present a general framework for classifying partially observed dynamical systems based on the idea of learning in the model space. In contrast to the existing approaches using point estimates of model parameters to represent individual data items, we employ posterior distributions over model parameters, thus taking into account in a principled manner the uncertainty due to both the generative (observational and/or dynamic noise) and observation (sampling in time) processes. We evaluate the framework on two test beds: a biological pathway model and a stochastic double-well system. Crucially, we show that the classification performance is not impaired when the model structure used for inferring posterior distributions is much more simple than the observation-generating model structure, provided the reduced-complexity inferential model structure captures the essential characteristics needed for the given classification task.

  11. Regional medical campuses: a new classification system.

    Science.gov (United States)

    Cheifetz, Craig E; McOwen, Katherine S; Gagne, Pierre; Wong, Jennifer L

    2014-08-01

    There is burgeoning belief that regional medical campuses (RMCs) are a significant part of the narrative about medical education and the health care workforce in the United States and Canada. Although RMCs are not new, in the recent years of medical education enrollment expansion, they have seen their numbers increase. Class expansion explains the rapid growth of RMCs in the past 10 years, but it does not adequately describe their function. Often, RMCs have missions that differ from their main campus, especially in the areas of rural and community medicine. The absence of an easy-to-use classification system has led to a lack of current research about RMCs as evidenced by the small number of articles in the current literature. The authors describe the process of the Group on Regional Medical Campuses used to develop attributes of a campus separate from the main campus that constitute a "classification" of a campus as an RMC. The system is broken into four models-basic science, clinical, longitudinal, and combined-and is linked to Liaison Committee on Medical Education standards. It is applicable to all schools and can be applied by any medical school dean or medical education researcher. The classification system paves the way for stakeholders to agree on a denominator of RMCs and conduct future research about their impact on medical education.

  12. Simple and accurate optical height sensor for wafer inspection systems

    Science.gov (United States)

    Shimura, Kei; Nakai, Naoya; Taniguchi, Koichi; Itoh, Masahide

    2016-02-01

    An accurate method for measuring the wafer surface height is required for wafer inspection systems to adjust the focus of inspection optics quickly and precisely. A method for projecting a laser spot onto the wafer surface obliquely and for detecting its image displacement using a one-dimensional position-sensitive detector is known, and a variety of methods have been proposed for improving the accuracy by compensating the measurement error due to the surface patterns. We have developed a simple and accurate method in which an image of a reticle with eight slits is projected on the wafer surface and its reflected image is detected using an image sensor. The surface height is calculated by averaging the coordinates of the images of the slits in both the two directions in the captured image. Pattern-related measurement error was reduced by applying the coordinates averaging to the multiple-slit-projection method. Accuracy of better than 0.35 μm was achieved for a patterned wafer at the reference height and ±0.1 mm from the reference height in a simple configuration.

  13. 40 CFR 141.710 - Bin classification for filtered systems.

    Science.gov (United States)

    2010-07-01

    ... Cryptosporidium Treatment Technique Requirements § 141.710 Bin classification for filtered systems. (a) Following... systems must determine their initial bin classification from the following table and using the... systems must report their initial bin classification under paragraph (c) of this section to the State...

  14. Accurate Complex Systems Design: Integrating Serious Games with Petri Nets

    Directory of Open Access Journals (Sweden)

    Kirsten Sinclair

    2016-03-01

    Full Text Available Difficulty understanding the large number of interactions involved in complex systems makes their successful engineering a problem. Petri Nets are one graphical modelling technique used to describe and check proposed designs of complex systems thoroughly. While automatic analysis capabilities of Petri Nets are useful, their visual form is less so, particularly for communicating the design they represent. In engineering projects, this can lead to a gap in communications between people with different areas of expertise, negatively impacting achieving accurate designs.In contrast, although capable of representing a variety of real and imaginary objects effectively, behaviour of serious games can only be analysed manually through interactive simulation. This paper examines combining the complementary strengths of Petri Nets and serious games. The novel contribution of this work is a serious game prototype of a complex system design that has been checked thoroughly. Underpinned by Petri Net analysis, the serious game can be used as a high-level interface to communicate and refine the design.Improvement of a complex system design is demonstrated by applying the integration to a proof-of-concept case study.   

  15. Functional classifications for cerebral palsy: correlations between the gross motor function classification system (GMFCS), the manual ability classification system (MACS) and the communication function classification system (CFCS).

    Science.gov (United States)

    Compagnone, Eliana; Maniglio, Jlenia; Camposeo, Serena; Vespino, Teresa; Losito, Luciana; De Rinaldis, Marta; Gennaro, Leonarda; Trabacca, Antonio

    2014-11-01

    This study aimed to investigate a possible correlation between the gross motor function classification system-expanded and revised (GMFCS-E&R), the manual abilities classification system (MACS) and the communication function classification system (CFCS) functional levels in children with cerebral palsy (CP) by CP subtype. It was also geared to verify whether there is a correlation between these classification systems and intellectual functioning (IF) and parental socio-economic status (SES). A total of 87 children (47 males and 40 females, age range 4-18 years, mean age 8.9±4.2) were included in the study. A strong correlation was found between the three classifications: Level V of the GMFCS-E&R corresponds to Level V of the MACS (rs=0.67, p=0.001); the same relationship was found for the CFCS and the MACS (rs=0.73, pfunctional disability profile were strong or moderate (GMFCS and IQ: rs=0.66, p=0.001; MACS and IQ: rs=0.58, p=0.001; CFCS and MACS: rs=0.65, p=0.001). The Kruskal-Wallis test was used to determine if there were differences between the GMFCS-E&R, the CFCS and the MACS by CP type. CP types showed different scores for the IQ level (Chi-square=8.59, df=2, p=0.014), the GMFCS-E&R (Chi-square=36.46, df=2, pfunctional classifications (GMFCS-E&R, CFCS and MACS) complement each other to provide a better description of the functional profile of CP. The systematic evaluation of the IQ can provide useful information about a possible future outcome for every functional level. The SES does not appear to affect functional profiles.

  16. 78 FR 58153 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    Science.gov (United States)

    2013-09-23

    ... RIN 3206-AM78 Prevailing Rate Systems; North American Industry Classification System Based Federal... Industry Classification System (NAICS) codes currently used in Federal Wage System wage survey industry... 2007 North American Industry Classification System (NAICS) codes used in Federal Wage System (FWS)...

  17. 78 FR 18252 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    Science.gov (United States)

    2013-03-26

    ... Industry Classification System Based Federal Wage System Wage Surveys AGENCY: U. S. Office of Personnel... is issuing a proposed rule that would update the 2007 North American Industry Classification System... North American Industry Classification System (NAICS) codes used in Federal Wage System (FWS)...

  18. Extensions to the Speech Disorders Classification System (SDCS)

    Science.gov (United States)

    Shriberg, Lawrence D.; Fourakis, Marios; Hall, Sheryl D.; Karlsson, Heather B.; Lohmeier, Heather L.; McSweeny, Jane L.; Potter, Nancy L.; Scheer-Cohen, Alison R.; Strand, Edythe A.; Tilkens, Christie M.; Wilson, David L.

    2010-01-01

    This report describes three extensions to a classification system for paediatric speech sound disorders termed the Speech Disorders Classification System (SDCS). Part I describes a classification extension to the SDCS to differentiate motor speech disorders from speech delay and to differentiate among three sub-types of motor speech disorders.…

  19. Classification criteria for systemic lupus erythematosus: a review.

    Science.gov (United States)

    Petri, M; Magder, L

    2004-01-01

    The Systemic Lupus International Collaborating Clinics, in preparation for revising the ACR classification criteria for systemic lupus erythematosus, reviewed the current classification criteria. These critical reviews, discussed at the Lund, Sweden, meeting in 2003, will be useful to the clinician and to the researcher. This paper reviews and critiques previous classification attempts.

  20. Extensions to the Speech Disorders Classification System (SDCS)

    Science.gov (United States)

    Shriberg, Lawrence D.; Fourakis, Marios; Hall, Sheryl D.; Karlsson, Heather B.; Lohmeier, Heather L.; McSweeny, Jane L.; Potter, Nancy L.; Scheer-Cohen, Alison R.; Strand, Edythe A.; Tilkens, Christie M.; Wilson, David L.

    2010-01-01

    This report describes three extensions to a classification system for paediatric speech sound disorders termed the Speech Disorders Classification System (SDCS). Part I describes a classification extension to the SDCS to differentiate motor speech disorders from speech delay and to differentiate among three sub-types of motor speech disorders.…

  1. Study of accurate volume measurement system for plutonium nitrate solution

    Energy Technology Data Exchange (ETDEWEB)

    Hosoma, T. [Power Reactor and Nuclear Fuel Development Corp., Tokai, Ibaraki (Japan). Tokai Works

    1998-12-01

    It is important for effective safeguarding of nuclear materials to establish a technique for accurate volume measurement of plutonium nitrate solution in accountancy tank. The volume of the solution can be estimated by two differential pressures between three dip-tubes, in which the air is purged by an compressor. One of the differential pressure corresponds to the density of the solution, and another corresponds to the surface level of the solution in the tank. The measurement of the differential pressure contains many uncertain errors, such as precision of pressure transducer, fluctuation of back-pressure, generation of bubbles at the front of the dip-tubes, non-uniformity of temperature and density of the solution, pressure drop in the dip-tube, and so on. The various excess pressures at the volume measurement are discussed and corrected by a reasonable method. High precision-differential pressure measurement system is developed with a quartz oscillation type transducer which converts a differential pressure to a digital signal. The developed system is used for inspection by the government and IAEA. (M. Suetake)

  2. Characteristics of a global classification system for perinatal deaths : a Delphi consensus study

    NARCIS (Netherlands)

    Wojcieszek, Aleena M.; Reinebrant, Hanna E.; Leisher, Susannah Hopkins; Allanson, Emma; Coory, Michael; Erwich, Jan Jaap; Froen, J. Frederik; Gardosi, Jason; Gordijn, Sanne; Gulmezoglu, Metin; Heazell, Alexander E. P.; Korteweg, Fleurisca J.; McClure, Elizabeth; Pattinson, Robert; Silver, Robert M.; Smith, Gordon; Teoh, Zheyi; Tuncalp, Ozge; Flenady, Vicki

    2016-01-01

    Background: Despite the global burden of perinatal deaths, there is currently no single, globally-acceptable classification system for perinatal deaths. Instead, multiple, disparate systems are in use world-wide. This inconsistency hinders accurate estimates of causes of death and impedes effective

  3. Classification system adopted for fixed cutter bits

    Energy Technology Data Exchange (ETDEWEB)

    Winters, W.J.; Doiron, H.H.

    1988-01-01

    The drilling industry has begun adopting the 1987 International Association of Drilling Contractors' (IADC) method for classifying fixed cutter drill bits. By studying the classification codes on bit records and properly applying the new IADC fixed cutter dull grading system to recently run bits, the end-user should be able to improve the selection and usage of fixed cutter bits. Several users are developing databases for fixed cutter bits in an effort to relate field performance to some of the more prominent bit design characteristics.

  4. Public Document Room file classification system

    Energy Technology Data Exchange (ETDEWEB)

    1982-06-01

    This listing contains detailed descriptions of the file classification system for documents available from the Public Document Room (PDR) of the US Nuclear Regulatory Commission. As a public service branch of the agency, the PDR maintains facilities for receiving, processing, storing, and retrieving documents which NRC generates or receives in performing its regulatory function. Unlike a library, the PDR does not maintain collections of formally published materials, such as books, monographs, serials, periodicals, or general indexes. The documents on file at the PDR can be reports, written records of meetings (transcripts), existing or proposed regulations, the text of licenses or their amendments, and correspondence.

  5. Fuzzy Rule Base System for Software Classification

    Directory of Open Access Journals (Sweden)

    Adnan Shaout

    2013-07-01

    Full Text Available Given the central role that software development plays in the delivery and application of informationtechnology, managers have been focusing on process improvement in the software development area. Thisimprovement has increased the demand for software measures, or metrics to manage the process. Thismetrics provide a quantitative basis for the development and validation of models during the softwaredevelopment process. In this paper a fuzzy rule-based system will be developed to classify java applicationsusing object oriented metrics. The system will contain the following features:Automated method to extract the OO metrics from the source code,Default/base set of rules that can be easily configured via XML file so companies, developers, teamleaders,etc, can modify the set of rules according to their needs,Implementation of a framework so new metrics, fuzzy sets and fuzzy rules can be added or removeddepending on the needs of the end user,General classification of the software application and fine-grained classification of the java classesbased on OO metrics, andTwo interfaces are provided for the system: GUI and command.

  6. Accurate measurement of RF exposure from emerging wireless communication systems

    Science.gov (United States)

    Letertre, Thierry; Monebhurrun, Vikass; Toffano, Zeno

    2013-04-01

    Isotropic broadband probes or spectrum analyzers (SAs) may be used for the measurement of rapidly varying electromagnetic fields generated by emerging wireless communication systems. In this paper this problematic is investigated by comparing the responses measured by two different isotropic broadband probes typically used to perform electric field (E-field) evaluations. The broadband probes are submitted to signals with variable duty cycles (DC) and crest factors (CF) either with or without Orthogonal Frequency Division Multiplexing (OFDM) modulation but with the same root-mean-square (RMS) power. The two probes do not provide accurate enough results for deterministic signals such as Worldwide Interoperability for Microwave Access (WIMAX) or Long Term Evolution (LTE) as well as for non-deterministic signals such as Wireless Fidelity (WiFi). The legacy measurement protocols should be adapted to cope for the emerging wireless communication technologies based on the OFDM modulation scheme. This is not easily achieved except when the statistics of the RF emission are well known. In this case the measurement errors are shown to be systematic and a correction factor or calibration can be applied to obtain a good approximation of the total RMS power.

  7. "Chromosome": a knowledge-based system for the chromosome classification.

    Science.gov (United States)

    Ramstein, G; Bernadet, M

    1993-01-01

    Chromosome, a knowledge-based analysis system has been designed for the classification of human chromosomes. Its aim is to perform an optimal classification by driving a tool box containing the procedures of image processing, pattern recognition and classification. This paper presents the general architecture of Chromosome, based on a multiagent system generator. The image processing tool box is described from the met aphasic enhancement to the fine classification. Emphasis is then put on the knowledge base intended for the chromosome recognition. The global classification process is also presented, showing how Chromosome proceeds to classify a given chromosome. Finally, we discuss further extensions of the system for the karyotype building.

  8. Digital system accurately controls velocity of electromechanical drive

    Science.gov (United States)

    Nichols, G. B.

    1965-01-01

    Digital circuit accurately regulates electromechanical drive mechanism velocity. The gain and phase characteristics of digital circuits are relatively unimportant. Control accuracy depends only on the stability of the input signal frequency.

  9. Applications of CRACK in the Classification of Integrable Systems

    OpenAIRE

    Wolf, Thomas

    2003-01-01

    Work on different classification problems is described as: the classification of integrable vector evolution equations, NLS systems with two vector unknowns, systems with one scalar and one vector unknown, classification of integrable Hamiltonians and non-local 2+1 dimensional equations. All these problems lead to large bi-linear algebraic systems to be solved. In an extended appendix an overview of the computer algebra package is given that was used to solve these systems.

  10. Terrorism Event Classification Using Fuzzy Inference Systems

    CERN Document Server

    Inyaem, Uraiwan; Meesad, Phayung; Tran, Dat

    2010-01-01

    Terrorism has led to many problems in Thai societies, not only property damage but also civilian casualties. Predicting terrorism activities in advance can help prepare and manage risk from sabotage by these activities. This paper proposes a framework focusing on event classification in terrorism domain using fuzzy inference systems (FISs). Each FIS is a decision-making model combining fuzzy logic and approximate reasoning. It is generated in five main parts: the input interface, the fuzzification interface, knowledge base unit, decision making unit and output defuzzification interface. Adaptive neuro-fuzzy inference system (ANFIS) is a FIS model adapted by combining the fuzzy logic and neural network. The ANFIS utilizes automatic identification of fuzzy logic rules and adjustment of membership function (MF). Moreover, neural network can directly learn from data set to construct fuzzy logic rules and MF implemented in various applications. FIS settings are evaluated based on two comparisons. The first evaluat...

  11. Classification system for oral submucous fibrosis

    Directory of Open Access Journals (Sweden)

    Chandramani Bhagvan More

    2012-01-01

    Full Text Available Oral submucous fibrosis (OSMF is a potentially malignant disorder (PMD and crippling condition of oral mucosa. It is a chronic insidious scarring disease of oral cavity, pharynx and upper digestive tract, characterized by progressive inability to open the mouth due to loss of elasticity and development of vertical fibrous bands in labial and buccal tissues. OSMF is a debilitating but preventable oral disease. It predominantly affects people of Southeast Asia and Indian subcontinent, where chewing of arecanut and its commercial preparation is high. Presence of fibrous bands is the main characteristic feature of OSMF. The present literature review provides the compilation of various classification system based on clinical and/or histopathological features of OSMF from several databases. The advantages and drawbacks of these classifications supersede each other, leading to perplexity. An attempt is made to provide and update the knowledge about this potentially malignant disorder to health care providers in order to help in early detection and treatment, thus reducing the mortality of oral cancer.

  12. Evaluation of the subaxial injury classification system

    Directory of Open Access Journals (Sweden)

    A F Joaquim

    2011-01-01

    Full Text Available Study design : Retrospective clinical study of patients treated for subaxial cervical spine trauma (SCST at a tertiary medical center. Purpose : Evaluate the validity of the Subaxial Injury Classification (SLIC system in surgical versus non-surgical decision making for SCST. Inclusion criteria : Age >12 years, presence of SCST with complete clinical and radiological (CT and MRI data. Exclusion criteria : Patients with incomplete radiographic or clinical data, pathological fractures, isolated upper cervical trauma (occiput to C2, isolated transverse process or spinous process fractures, chronic or age indeterminate fractures, isolate MRI findings, and severe systemic trauma with death prior to either surgical or non-surgical treatment. Results : Fourteen patients were treated non-surgically (C, whereas 24 were treated surgically (S. In the C group, the SLIC score ranged from 0 to 5 points (standard deviation [SD] = 1.20 points; mean 1.07; median 1. Just 1 patient had an SLIC score greater than 2 (7.1% of the patients. In the S group, the SLIC score ranged from 1 to 10 points (standard deviation [SD] = 2.03 points; mean 5.6; median 6. Just 2 patients had an SLIC score smaller than 4 (both with 1 point each, 8.3% of the total group. All the other 22 (accounting for 91.6% patients had an SLIC of 4 or more points. Conclusions : Our study suggests that the SLIC classification looks to be a promising system to aid spinal surgeons in the decision-making process of subaxial cervical trauma, but a large prospective cohort study is required.

  13. Accurate and Simple Calibration of DLP Projector Systems

    DEFF Research Database (Denmark)

    Wilm, Jakob; Olesen, Oline Vinter; Larsen, Rasmus

    2014-01-01

    Much work has been devoted to the calibration of optical cameras, and accurate and simple methods are now available which require only a small number of calibration targets. The problem of obtaining these parameters for light projectors has not been studied as extensively and most current methods...

  14. ATTACHMENTS IN PROSTHODONTICS: DIFFERENT SYSTEMS OF CLASSIFICATION: A REVIEW

    Directory of Open Access Journals (Sweden)

    Khuthija Khanam

    2014-07-01

    Full Text Available Attachments are mechanical devices for the fixation and stabilisation of a dental prosthesis and include frictional, internal, intracoronal, extracoronal, key-key way, parallel, precision and slotted types. (Boucher 1976. Attachments are used as alternative to clasps in removable partial denture therapy for both aesthetic and functional purpose. Their application is not only limited to removable partial dentures, but has a broader usage in fixed bridges, overdentures, implant supported dentures as well. Hundreds of attachments are available commercially and significant differences exist between them. In this article, different systems of classification of attachments have been reviewed. They are categorised as precision and semi-precision depending on the method of manufacture, intracoronal and extra coronal depending on their location relative to the abutment tooth, rigid and resilient determined by the amount of movement allowed between the component parts, also as stud and bar attachments depending on the design. A classification system to more accurately evaluate differences among resilient attachments has also been described here.

  15. Classification system of foramen magnum meningiomas

    Science.gov (United States)

    Bruneau, Michaël; George, Bernard

    2010-01-01

    Background: Foramen magnum meningiomas (FMMs) are challenging tumors. We report a classification system based on our experience of 107 tumors. Materials and Methods: The three main algorithm criteria included the compartment of development of the tumor, its dural insertion, and its relation to the vertebral artery. Results: The compartment of development was most of the time intradural (101/107, 94.4%) and less frequently extradural (3/107, 2.8%) or both intra-extradural. (3/107, 2.8%). When developed inside the intradural compartment, FMMs were subdivided into posterior (6/104, 5.8%), lateral (57/104, 54.8%), and anterior (41/104, 39.4%), if their insertion was respectively posterior to the dentate ligament, anterior to the dentate ligament without or with extension over the midline. Anterior and lateral intradural lesions grew below (77/98, 78.6%), above (16/98, 16.3%), or on both sides (5/98, 5.1%) of the VA. Only three cases of extraduralFMMs (3/107, 2.8%) were resected by an antero-lateral approach while all the other ones (104/107, 97.2%) were removed successfully by a postero-lateral approach. Lower cranial nerves were displaced superiorly in FMM growing below the VA but their position cannot be anticipated in other situations. Conclusions: This classification system helps for defining the best surgical approach but also for anticipating the position of the lower cranial nerves and therefore for reducing the surgical morbidity. PMID:20890409

  16. Marginalization and Exclusion: Unraveling Systemic Bias in Classification

    DEFF Research Database (Denmark)

    Mai, Jens-Erik

    2016-01-01

    This paper explores the knowledge organization landscape in which Hope Olson’s numerous contri- butions to the field are situated. The paper first explores some of the foundational conceptual notions within knowledge organization that today are well-accepted. The paper then reviews Hope Olson...... in large library classification has unraveled the systemic bias found in all classifications. The paper calls for stronger engagement between scholarship and practice to ad- dress marginalization and exclusion in further work on classification systems....

  17. Designing a Classification System for Internet Offenders: Doing Cognitive Distortions

    Science.gov (United States)

    Hundersmarck, Steven F.; Durkin, Keith F.; Delong, Ronald L.

    2007-01-01

    Televised features such as NBC's "To Catch a Predator" have highlighted the growing problem posed by Internet sexual predators. This paper reports on the authors' attempts in designing a classification system for Internet offenders. The classification system was designed based on existing theory, understanding the nature of Internet offenders and…

  18. A new accurate pill recognition system using imprint information

    Science.gov (United States)

    Chen, Zhiyuan; Kamata, Sei-ichiro

    2013-12-01

    Great achievements in modern medicine benefit human beings. Also, it has brought about an explosive growth of pharmaceuticals that current in the market. In daily life, pharmaceuticals sometimes confuse people when they are found unlabeled. In this paper, we propose an automatic pill recognition technique to solve this problem. It functions mainly based on the imprint feature of the pills, which is extracted by proposed MSWT (modified stroke width transform) and described by WSC (weighted shape context). Experiments show that our proposed pill recognition method can reach an accurate rate up to 92.03% within top 5 ranks when trying to classify more than 10 thousand query pill images into around 2000 categories.

  19. A novel classification system for aging theories

    Directory of Open Access Journals (Sweden)

    Lucas Siqueira Trindade

    2013-03-01

    Full Text Available Theories of lifespan evolution are a source of confusion amongst aging researchers. After a century of aging research the dispute over whether the aging process is active or passive persists and a comprehensive and universally accepted theoretical model remains elusive. Evolutionary aging theories primarily dispute whether the aging process is exclusively adapted to favor the kin or exclusively non-adapted to favor the individual. Interestingly, contradictory data and theories supporting both exclusively programmed and exclusively non-programmed theories continue to grow. However, this is a false dichotomy; natural selection favors traits resulting in efficient reproduction whether they benefit the individual or the kin. Thus, to understand the evolution of aging, first we must understand the environment-dependent balance between the advantages and disadvantages of extended lifespan in the process of spreading genes. As described by distinct theories, different niches and environmental conditions confer on extended lifespan a range of fitness values varying from highly beneficial to highly detrimental. Here, we considered the range of fitness values for extended lifespan and develop a fitness-based framework for categorizing existing theories. We show that all theories can be classified into four basic types: secondary (beneficial, maladaptive (neutral, assisted death (detrimental and senemorphic aging (varying between beneficial to detrimental. We anticipate that this classification system will assist with understanding and interpreting aging/death by providing a way of considering theories as members of one of these classes rather than consideration of their individual details.

  20. The Bellevue Classification System: nursing's voice upon the library shelves.

    Science.gov (United States)

    Mages, Keith C

    2011-01-01

    This article examines the inspiration, construction, and meaning of the Bellevue Classification System (BCS), created during the 1930s for use in the Bellevue School of Nursing Library. Nursing instructor Ann Doyle, with assistance from librarian Mary Casamajor, designed the BCS after consulting with library leaders and examining leading contemporary classification systems, including the Dewey Decimal Classification and Library of Congress, Ballard, and National Health Library classification systems. A close textual reading of the classes, subclasses, and subdivisions of these classification systems against those of the resulting BCS, reveals Doyle's belief that the BCS was created not only to organize the literature, but also to promote the burgeoning intellectualism and professionalism of early twentieth-century American nursing.

  1. Accurate Localization of Communicant Vehicles using GPS and Vision Systems

    Directory of Open Access Journals (Sweden)

    Georges CHALLITA

    2009-07-01

    Full Text Available The new generation of ADAS systems based on cooperation between vehicles can offer serious perspectives to the road security. The inter-vehicle cooperation is made possible thanks to the revolution in the wireless mobile ad hoc network. In this paper, we will develop a system that will minimize the imprecision of the GPS used to car tracking, based on the data given by the GPS which means the coordinates and speed in addition to the use of the vision data that will be collected from the loading system in the vehicle (camera and processor. Localization information can be exchanged between the vehicles through a wireless communication device. The creation of the system must adopt the Monte Carlo Method or what we call a particle filter for the treatment of the GPS data and vision data. An experimental study of this system is performed on our fleet of experimental communicating vehicles.

  2. The development of a classification system for inland aquatic ...

    African Journals Online (AJOL)

    2015-10-05

    Oct 5, 2015 ... a prescribed national Water Resource Classification System. (DWAF, 2007a). In the ..... The more recently developed techniques for the assessment of the ...... decision support system for managing wetlands. WRC Report No.

  3. Accurate Intelligent Map Matching Algorithms for Vehicle Positioning System

    Directory of Open Access Journals (Sweden)

    M. Pashaian

    2012-03-01

    Full Text Available The purpose of a navigation system installed on a car is to help drivers in order to select an optimal path to reach the destination. In most of these systems, Global Positioning System (GPS are used to determine vehicle position. There are number of error sources that undermine the quality of GPS measurements for car navigation systems. For this reason, technique like Map Matching (MM is required to identify the road of a car is that moving on, with a high degree of confidence. MM in car navigation systems, has a task of determining the current position of vehicle on the city's map. In this paper, two new MM methods based on Fuzzy Logic (FL and Neural Network (NN are proposed to solve the matching problem in car navigation systems. For the experiments, a car navigation system is implemented with a low cost GPS receiver. The proposed fuzzy algorithm is easy to calculate. It requires little computation time without need to extra sensors and can find effectively the mobile exact position which moves on the road.

  4. Towards accurate quantum simulations of large systems with small computers.

    Science.gov (United States)

    Yang, Yonggang

    2017-01-24

    Numerical simulations are important for many systems. In particular, various standard computer programs have been developed for solving the quantum Schrödinger equations. However, the accuracy of these calculations is limited by computer capabilities. In this work, an iterative method is introduced to enhance the accuracy of these numerical calculations, which is otherwise prohibitive by conventional methods. The method is easily implementable and general for many systems.

  5. Towards accurate quantum simulations of large systems with small computers

    Science.gov (United States)

    Yang, Yonggang

    2017-01-01

    Numerical simulations are important for many systems. In particular, various standard computer programs have been developed for solving the quantum Schrödinger equations. However, the accuracy of these calculations is limited by computer capabilities. In this work, an iterative method is introduced to enhance the accuracy of these numerical calculations, which is otherwise prohibitive by conventional methods. The method is easily implementable and general for many systems. PMID:28117366

  6. Examining Literary Warrant in Ancient Chinese Book Classification Systems

    Directory of Open Access Journals (Sweden)

    Hui-Chen Cheng

    2016-06-01

    Full Text Available This study examines the application of literary warrant—a key principle in modern classification theory—in traditional Chinese bibliographic classifications for the purpose of improving the understanding of classification theory in the Chinese tradition. The concept of literary warrant is first briefly discussed. Next, the author analyzes a number of selected book classification systems from premodern China to determine whether literary warrant is a factor in their design and how it is applied. This paper concludes with a summary of the findings. [Article content in Chinese

  7. Development of an Interest-Oriented Occupational Classification System.

    Science.gov (United States)

    Droege, Robert C.; Padgett, Adaline

    1979-01-01

    Summarizes research to develop a comprehensive and coordinated occupational testing and classification system. An extension of this research led to identification of measurable interest factors which are incorporated in a trait-oriented occupational classification structure contained in USES Guide for Occupational Exploration, a supplement to the…

  8. Update of the LIPID MAPS comprehensive classification system for lipids

    NARCIS (Netherlands)

    Fahy, E.; Subramaniam, S.; Murphy, R.C.; Nishijima, M.; Raetz, C.R.H.; Shimizu, T.; Spener, F.; van Meer, G.; Wakelam, M.J.O.; Dennis, E.A.

    2009-01-01

    In 2005, the International Lipid Classification and Nomenclature Committee under the sponsorship of the LIPID MAPS Consortium developed and established a “Comprehensive Classification System for Lipids” based on well-defined chemical and biochemical principles and using an ontology that is extensibl

  9. Towards a Collaborative Intelligent Tutoring System Classification Scheme

    Science.gov (United States)

    Harsley, Rachel

    2014-01-01

    This paper presents a novel classification scheme for Collaborative Intelligent Tutoring Systems (CITS), an emergent research field. The three emergent classifications of CITS are unstructured, semi-structured, and fully structured. While all three types of CITS offer opportunities to improve student learning gains, the full extent to which these…

  10. A clinical classification system for rheumatoid forefoot deformity

    NARCIS (Netherlands)

    Doorn, P.F.; Keijsers, N.L.; Limbeek, J. van; Anderson, P.G.; Laan, R.F.J.M.; Bosch, P.V.; Malefijt, M.C.; Louwerens, J.W.

    2011-01-01

    BACKGROUND AND PURPOSE: In the present study a classification system for the rheumatoid forefoot is reported with its intra- and interobserver reliability and clinical relevance. The classification is based on the sequence of anatomical changes resulting from the loss of integrity of the MTP joints,

  11. A consumer-oriented classification system for home meal replacements

    NARCIS (Netherlands)

    Costa, A.I.A.; Dekker, M.; Beumer, R.R.; Rombouts, F.M.; Jongen, W.M.F.

    2001-01-01

    This paper introduces a new definition and classification system for home meal replacements (HMR), based on convenience attributes as viewed by consumers. An overview of other food classifications, focusing on methodological aspects, is also presented. The classifying criteria chosen (shelf-life and

  12. Update of the LIPID MAPS comprehensive classification system for lipids

    NARCIS (Netherlands)

    Fahy, E.; Subramaniam, S.; Murphy, R.C.; Nishijima, M.; Raetz, C.R.H.; Shimizu, T.; Spener, F.; van Meer, G.|info:eu-repo/dai/nl/068570368; Wakelam, M.J.O.; Dennis, E.A.

    2009-01-01

    In 2005, the International Lipid Classification and Nomenclature Committee under the sponsorship of the LIPID MAPS Consortium developed and established a “Comprehensive Classification System for Lipids” based on well-defined chemical and biochemical principles and using an ontology that is

  13. Validation of potential classification criteria for systemic sclerosis.

    NARCIS (Netherlands)

    Johnson, S.R.; Fransen, J.; Khanna, D.; Baron, M.; Hoogen, F. van den; Medsger TA, J.r.; Peschken, C.A.; Carreira, P.E.; Riemekasten, G.; Tyndall, A.; Matucci-Cerinic, M.; Pope, J.E.

    2012-01-01

    OBJECTIVE: Classification criteria for systemic sclerosis (SSc; scleroderma) are being updated jointly by the American College of Rheumatology and European League Against Rheumatism. Potential items for classification were reduced to 23 using Delphi and nominal group techniques. We evaluated the fac

  14. New C2 synchondrosal fracture classification system

    Energy Technology Data Exchange (ETDEWEB)

    Rusin, Jerome A.; Ruess, Lynne [Department of Radiology, Nationwide Children' s Hospital, Columbus, OH (United States); The Ohio State University College of Medicine and Public Health, Columbus, OH (United States); Daulton, Robert S. [Department of Radiology, Nationwide Children' s Hospital, Columbus, OH (United States)

    2015-06-15

    Excessive cervical flexion-extension accompanying mild to severe impact injuries can lead to C2 synchondrosal fractures in young children. To characterize and classify C2 synchondrosal fracture patterns. We retrospectively reviewed imaging and medical records of children who were treated for cervical spine fractures at our institution between 1995 and 2014. We reviewed all fractures involving the five central C2 synchondroses with regard to patient demographics, mechanism of injury, fracture pattern, associated fractures and other injuries, treatment plans and outcome. Fourteen children had fractures involving the central C2 synchondroses. There were nine boys and five girls, all younger than 6 years. We found four distinct fracture patterns. Eleven complete fractures were further divided into four subtypes (a, b, c and d) based on degree of anterior displacement of the odontoid segment and presence of distraction. Nine of these 11 children had fractures through both odontoneural synchondroses and the odontocentral synchondrosis; one had fractures involving both neurocentral synchondroses and the odontoneural synchondrosis; one had fractures through bilateral odontoneural and bilateral neurocentral synchondroses. Three children had incomplete fractures, defined as a fracture through a single odontoneural synchondrosis with or without partial extension into either the odontocentral or the adjacent neurocentral synchondroses. All complete fractures were displaced or angulated. Four had associated spinal cord injury, including two contusions (subtype c fractures) and two fatal transections (subtype d fractures). Most children were treated with primary halo stabilization. Subtype c fractures required surgical fixation. We describe four patterns of central C2 synchondrosal fractures, including two unique patterns that have not been reported. We propose a classification system to distinguish these fractures and aid in treatment planning. (orig.)

  15. The growing importance of an accurate system of building control

    NARCIS (Netherlands)

    Visscher, H.J.; Meijer, F.M.

    2008-01-01

    Systems of building control have a long history. Technical regulations and control seems to be the subject of an ongoing debate between, on the one hand, those in favour of deregulation and reducing the administrative burden and, on the other hand, new quality demands that require government interve

  16. Automatic Construction of Accurate Models of Physical Systems

    Science.gov (United States)

    1998-07-10

    order to develop an AI-adapted global optimization tool that combines qualitative reasoning and local numerical methods; see the Annals of Mathematics and...34Global Solutions for Nonlinear Systems using Qualitative Reasoning," Annals of Mathematics and Artificial Intelligence (1998) • • E. Bradley and

  17. A novel accurate minioptical tracking system for percutaneous needle placement.

    Science.gov (United States)

    von Jako, Christopher R; Zuk, Yuval; Zur, Oded; Gilboa, Pini

    2013-08-01

    The novel optical tracking system employs a miniature video camera, mounted on the hub of an interventional needle, to determine the location and orientation of the needle relative to a skin-attached sticker with color reference markers. A computed tomography (CT) scan is used to register the same reference markers to the anatomy in the CT images, and thus, register the needle to the anatomy and to a user-selected target. A computer displays a simulation of the interventional needle on the CT images, providing guidance information to assist a user in directing the needle to the target. Bench testing was performed on a custom phantom to determine the accuracy of this minioptical tracking system. The resulting accuracy data demonstrate a good correlation with phantom coordinates and the CT images.

  18. Fast Frequency Offset Acquisition and Accurate Tracking in OFDM Systems

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhong-shan; ZHAO Ming; LIU Yuan-an

    2004-01-01

    A new carrier frequency offset estimation scheme for Orthogonal Frequency-Division Multiplexing (OFDM) systems is proposed. The carrier frequency offset estimation includes acquisition and tracking. The acquisition range of the proposed algorithm is as large as one half of the overall signal bandwidth. Comparison of the proposed scheme with Schmidl's algorithm by computer simulation illustrates the superior performance of the proposed scheme with regard to estimation accuracy in both AWGN channel and multipath channels.

  19. The theory and practice of the Dewey Decimal Classification system

    CERN Document Server

    Satija, M P

    2013-01-01

    The Dewey Decimal Classification system (DDC) is the world's most popular library classification system. The 23rd edition of the DDC was published in 2011. This second edition of The Theory and Practice of the Dewey Decimal Classification System examines the history, management and technical aspects of the DDC up to its latest edition. The book places emphasis on explaining the structure and number building techniques in the DDC and reviews all aspects of subject analysis and number building by the most recent version of the DDC. A history of, and introduction to, the DDC is followed by subjec

  20. EAI-oriented information classification code system in manufacturing enterprises

    Institute of Scientific and Technical Information of China (English)

    Junbiao WANG; Hu DENG; Jianjun JIANG; Binghong YANG; Bailing WANG

    2008-01-01

    Although the traditional information classifi-cation coding system in manufacturing enterprises (MEs) emphasizes the construction of code standards, it lacks the management of the code creation, code data transmission and so on. According to the demands of enterprise application integration (EAI) in manufacturing enter-prises, an enterprise application integration oriented information classification code system (EAIO-ICCS) is proposed. EAIO-ICCS expands the connotation of the information classification code system and assures the identity of the codes in manufacturing enterprises with unified management of codes at the view of its lifecycle.

  1. Micron-Accurate Laser Fresnel-Diffraction Ranging System

    Science.gov (United States)

    Lehner, David; Campbell, Jonathan; Smith, Kelly; Sanders, Alvin; Allison, Stephen; Smaley, Larry

    2008-01-01

    Two versions of an optoelectronic system undergoing development are depicted. The system is expected to be capable of measuring a distance between 2 and 10 m with an error of no more than 1 micrometer. The system would be designed to exploit Fresnel diffraction of a laser beam. In particular, it would be designed to take advantage of the fact that a Fresnel diffraction pattern is ultrasensitive to distance. The two versions would differ in the following respects: In version 1, the focus of the telescope would be in the Fresnel region, and the telescope would have a small depth of focus. As a consequence, the Fresnel pattern would be imaged directly onto the photodetector array; in version 2, a multielement lens module would displace the Fresnel region from the vicinity of the pinhole to the vicinity of the optical receiver. As the distance to be measured varied, the location of the receiver relative to the displaced Fresnel-diffraction region would vary, thereby causing the Fresnel diffraction pattern on the focal plane to vary. The multielement lens module would also correct for aberrations. The processing of the digitized Fresnel diffraction pattern in the computer might be accelerated by using only parts of the pattern or even only one small part - the central pixel. As the distance from the pinhole increased, the central pixel would rapidly cycle between maximum and minimum light intensity. This in itself would not be sufficient to uniquely determine the distance. However, by varying the size of the pinhole or the wavelength of the laser, one could obtain a second cycle of variation of intensity that, in conjunction with the first cycle, could enable a unique determination of distance. Alternatively, for a single wavelength and a single pinhole size, it should suffice to consider the data from only two different key pixels in the Fresnel pattern.

  2. Blood-Pressure Measuring System Gives Accurate Graphic Output

    Science.gov (United States)

    1965-01-01

    The problem: To develop an instrument that will provide an external (indirect) measurement of arterial blood pressure in the form of an easily interpreted graphic trace that can be correlated with standard clinical blood-pressure measurements. From sphygmograms produced by conventional sphygmographs, it is very difficult to differentiate the systolic and diastolic blood-pressure pulses and to correlate these indices with the standard clinical values. It is nearly impossible to determine these indices when the subject is under physical or emotional stress. The solution: An electronic blood-pressure system, basically similar to conventional ausculatory sphygmomanometers, employing a standard occluding cuff, a gas-pressure source, and a gas-pressure regulator and valve. An electrical output transducer senses cuff pressure, and a microphone positioned on the brachial artery under the occluding cuff monitors the Korotkoff sounds from this artery. The output signals present the conventional systolic and diastolic indices in a clear, graphical display. The complete system also includes an electronic timer and cycle-control circuit.

  3. Accurate Sliding-Mode Control System Modeling for Buck Converters

    DEFF Research Database (Denmark)

    Høyerby, Mikkel Christian Wendelboe; Andersen, Michael Andreas E.

    2007-01-01

    This paper shows that classical sliding mode theory fails to correctly predict the output impedance of the highly useful sliding mode PID compensated buck converter. The reason for this is identified as the assumption of the sliding variable being held at zero during sliding mode, effectively mod...... approach also predicts the self-oscillating switching action of the sliding-mode control system correctly. Analytical findings are verified by simulation as well as experimentally in a 10-30V/3A buck converter.......This paper shows that classical sliding mode theory fails to correctly predict the output impedance of the highly useful sliding mode PID compensated buck converter. The reason for this is identified as the assumption of the sliding variable being held at zero during sliding mode, effectively...

  4. Accurate absolute parameters of the binary system V4089 Sgr

    CERN Document Server

    Veramendi, M E

    2014-01-01

    We carried out a spectroscopic-photometric analysis of the binary V4089 Sgr with the aim to obtain absolute masses and radii of the components and to contrast these parameters with stellar evolution theoretical models. We took high-resolution spectra and measured radial velocity using standard cross-correlations and a technique of spectral disentangling. Absolute parameters of the components were determined through the simultaneous fitting of measured radial velocities and Geneva photometric data available in the literature. In this way we obtained Ma=2.584+-0.008 Msun, Mb=1.607+-0.007 Msun, Ra=3.959+-0.013 Rsun, and Rb=1.605+-0.016 Rsun. The comparison of these parameters with two grids of theoretical models led to estimate narrow ranges of possible values for system metallicity and age. According circularization theory it is not expected that the binary had been achieved a circular orbit as a result of tidal friction, so the null eccentricity found is an interesting fact. On the other hand, we measured proj...

  5. Classification systems and selection systems: the risks of radical innovation and category spanning

    NARCIS (Netherlands)

    Wijnberg, N.M.

    2011-01-01

    This paper looks at the relations between classification and competition, using the theoretical framework of selection system theory. In a particular competitive arena more than one classification system can be in use. The proportion of classification systems in use by consumers that are also in use

  6. A proposed ecosystem services classification system to support green accounting

    Science.gov (United States)

    There are a multitude of actual or envisioned, complete or incomplete, ecosystem service classification systems being proposed to support Green Accounting. Green Accounting is generally thought to be the formal accounting attempt to factor environmental production into National ...

  7. Rapid Occupant Classification System Based Rough Sets Theory

    Directory of Open Access Journals (Sweden)

    Lin Chen

    2012-09-01

    Full Text Available In the intelligent airbag system, the correct classification of occupant type is the precondition and plays an important role in controlling the airbag release time and inflation strength during emergent accidents. In the paper, the novel rapid occupant classification system is proposed in which tens of pressure sensors are needed to real-time collect pressure distribution data and then the rough sets theory is combined to extract classification knowledge from data features. Furthermore, Experiments have been done to verify its efficiency and effectiviness.

  8. Cognitive-motivational deficits in ADHD: development of a classification system.

    Science.gov (United States)

    Gupta, Rashmi; Kar, Bhoomika R; Srinivasan, Narayanan

    2011-01-01

    The classification systems developed so far to detect attention deficit/hyperactivity disorder (ADHD) do not have high sensitivity and specificity. We have developed a classification system based on several neuropsychological tests that measure cognitive-motivational functions that are specifically impaired in ADHD children. A total of 240 (120 ADHD children and 120 healthy controls) children in the age range of 6-9 years and 32 Oppositional Defiant Disorder (ODD) children (aged 9 years) participated in the study. Stop-Signal, Task-Switching, Attentional Network, and Choice Delay tests were administered to all the participants. Receiver operating characteristic (ROC) analysis indicated that percentage choice of long-delay reward best classified the ADHD children from healthy controls. Single parameters were not helpful in making a differential classification of ADHD with ODD. Multinominal logistic regression (MLR) was performed with multiple parameters (data fusion) that produced improved overall classification accuracy. A combination of stop-signal reaction time, posterror-slowing, mean delay, switch cost, and percentage choice of long-delay reward produced an overall classification accuracy of 97.8%; with internal validation, the overall accuracy was 92.2%. Combining parameters from different tests of control functions not only enabled us to accurately classify ADHD children from healthy controls but also in making a differential classification with ODD. These results have implications for the theories of ADHD.

  9. A simplified classification system for partially edentulous spaces

    Directory of Open Access Journals (Sweden)

    Bhandari Aruna J, Bhandari Akshay J

    2014-04-01

    Full Text Available Background: There is no single universally employed classification system that will specify the exact edentulous situation. Several classification systems exist to group the situation and avoid confusion. Classifications based on edentulous areas, finished restored prostheses, type of direct retainers or fulcrum lines are there. Some are based depending on the placement of the implants. Widely accepted Kennedy Applegate classification does not give any idea about length, span or number of teeth missing. Rule 6 governing the application of Kennedy method states that additional edentulous areas are referred as modification number 1,2 etc. Rule 7 states that extent of the modification is not considered; only the number of edentulous areas is considered. Hence there is a need to modify the Kennedy –Applegate System. Aims: This new classification system is an attempt to modify Kennedy –Applegate System so as to give the exact idea about missing teeth, space, span, side and areas of partially edentulous arches. Methods and Material: This system will provide the information regarding Maxillary or Mandibular partially edentulous arches, Left or Right side, length of the edentulous space, number of teeth missing and whether there will be tooth borne or tooth – tissue borne prosthesis. Conclusions: This classification is easy for application, communication and will also help to design the removable cast partial denture in a better logical and systematic way. Also, this system will give the idea of the edentulous status and the number of missing teeth in fixed, hybrid or implant prosthesis.

  10. A critical analysis of international standards for construction classification - results from the development of a new Swedish construction classification system

    OpenAIRE

    Ekholm, Anders

    2016-01-01

    A new Swedish construction classification system, CoClass, is now under development. CoClass has presented two alternative classifications for review, both based on the standard for construction classification ISO 12006-2:2015. One alternative also applies the IEC CD 81346-series for reference designations which includes classification tables for systems and components with function as the basis for subdivision of classes. A critical analysis shows that the 81346 series subdivision by functio...

  11. A water-renewal system that accurately delivers small volumes of water to exposure chambers

    Science.gov (United States)

    Zumwalt, D. C.; Dwyer, F.J.; Greer, I.E.; Ingersoll, C.G.

    1994-01-01

    This paper describes a system that can accurately deliver small volumes of water (50 ml per cycle) to eight 300-ml beakers. The system is inexpensive <$100), easy to build (<8 h), and easy to calibrate (<15 min), and accurately delivers small volumes of water (<5% variability).

  12. A method for verifying a vector-based text classification system.

    Science.gov (United States)

    Lu, Chris J; Humphrey, Susanne M; Browne, Allen C

    2008-11-06

    Journal Descriptor Indexing (JDI) is a vector-based text classification system developed at NLM (National Library of Medicine), originally in Lisp and now as a Java tool. Consequently, a testing suite was developed to verify training set data and results of the JDI tool. A methodology was developed and implemented to compare two sets of JD vectors, resulting in a single index (from 0 - 1) measuring their similarity. This methodology is fast, effective, and accurate.

  13. IMAGE RECONSTRUCTION AND OBJECT CLASSIFICATION IN CT IMAGING SYSTEM

    Institute of Scientific and Technical Information of China (English)

    张晓明; 蒋大真; 等

    1995-01-01

    By obtaining a feasible filter function,reconstructed images can be got with linear interpolation and filtered backoprojection techniques.Considering the gray and spatial correlation neighbour informations of each pixel,a new supervised classification method is put forward for the reconstructed images,and an experiment with noise image is done,the result shows that the method is feasible and accurate compared with ideal phantoms.

  14. Human-interpretable feature pattern classification system using learning classifier systems.

    Science.gov (United States)

    Ebadi, Toktam; Kukenys, Ignas; Browne, Will N; Zhang, Mengjie

    2014-01-01

    Image pattern classification is a challenging task due to the large search space of pixel data. Supervised and subsymbolic approaches have proven accurate in learning a problem's classes. However, in the complex image recognition domain, there is a need for investigation of learning techniques that allow humans to interpret the learned rules in order to gain an insight about the problem. Learning classifier systems (LCSs) are a machine learning technique that have been minimally explored for image classification. This work has developed the feature pattern classification system (FPCS) framework by adopting Haar-like features from the image recognition domain for feature extraction. The FPCS integrates Haar-like features with XCS, which is an accuracy-based LCS. A major contribution of this work is that the developed framework is capable of producing human-interpretable rules. The FPCS system achieved 91 [Formula: see text] 1% accuracy on the unseen test set of the MNIST dataset. In addition, the FPCS is capable of autonomously adjusting the rotation angle in unaligned images. This rotation adjustment raised the accuracy of FPCS to 95%. Although the performance is competitive with equivalent approaches, this was not as accurate as subsymbolic approaches on this dataset. However, the benefit of the interpretability of rules produced by FPCS enabled us to identify the distribution of the learned angles-a normal distribution around [Formula: see text]-which would have been very difficult in subsymbolic approaches. The analyzable nature of FPCS is anticipated to be beneficial in domains such as speed sign recognition, where underlying reasoning and confidence of recognition needs to be human interpretable.

  15. Classification

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2017-01-01

    This article presents and discusses definitions of the term “classification” and the related concepts “Concept/conceptualization,”“categorization,” “ordering,” “taxonomy” and “typology.” It further presents and discusses theories of classification including the influences of Aristotle...... and Wittgenstein. It presents different views on forming classes, including logical division, numerical taxonomy, historical classification, hermeneutical and pragmatic/critical views. Finally, issues related to artificial versus natural classification and taxonomic monism versus taxonomic pluralism are briefly...

  16. A new classification system for dental treatment under general anesthesia.

    Science.gov (United States)

    Loyola-Rodriguez, Juan Pablo; Zavala-Alonso, Veronica; Patiño-Marin, Nuria; Friedman, Clive

    2006-01-01

    The provision of comprehensive care for patients with special needs using dental general anesthesia (DGA) has changed over time, and now includes more complex procedures and the participation of many services. As a result, it is necessary to integrate, organize and describe all of the procedures that are carried out in different DGA settings. The aim of this study was to propose a systematic classification for dental treatment procedures be delivered under DGA, and to compare this classification system with an existing system. This new classification system has three distinct components: type, frequency and length of time needed to complete dental procedures for both primary and permanent teeth. A wide range of oral surgery procedures and endodontic treatment was also included. A retrospective cohort study utilizing 84 subjects was used to develop and compare the two classification systems. When comparing the different categories of procedures by both classifications, there were significant statistical differences between them (p dental or medical specialties. The classification system in this study includes detailed information regarding the procedures involved in the DGA. This helps to provide a clear understanding and specific information that enables the comparison of clinical experiences across populations where a DGA has been used for patients with special needs.

  17. On accurate computations of bound state properties in three- and four-electron atomic systems

    CERN Document Server

    Frolov, Alexei M

    2016-01-01

    Results of accurate computations of bound states in three- and four-electron atomic systems are discussed. Bound state properties of the four-electron lithium ion Li$^{-}$ in its ground $2^{2}S-$state are determined from the results of accurate, variational computations. We also consider a closely related problem of accurate numerical evaluation of the half-life of the beryllium-7 isotope. This problem is of paramount importance for modern radiochemistry.

  18. Classification problems in object-based representation systems

    OpenAIRE

    Napoli, Amedeo

    1999-01-01

    Colloque avec actes et comité de lecture.; Classification is a process that consists in two dual operations: generating a set of classes and then classifying given objects into the created classes. The class generation may be understood as a learning process and object classification as a problem-solving process. The goal of this position paper is to introduce and to make precise the notion of a classification problem in object-based representation systems, e.g. a query against a class hierar...

  19. Comparison of the clinical applicability of Miller's classification system to Kumar and Masamatti's classification system of gingival recession

    Science.gov (United States)

    Kumar, Ashish; Gupta, Geeti; Puri, Komal; Bansal, Mansi; Jain, Deept; Khatri, Manish; Masamatti, Sujata Surendra

    2015-01-01

    Background: The aims of the present study were to (i) Find the percentage of recession cases that could be classified by application of Miller's and/or Kumar and Masamatti's classification of gingival recession, and (ii) compare the percentage of clinical applicability of Miller's criteria and Kumar and Masamatti's criteria to the total recessions present. Materials and Methods: A total of 104 patients (1089 recession cases) were included in the study wherein they were classified using both Miller's and Kumar and Masamatti's classification systems of gingival recession. Percentage comparison of the application of both classification systems was done. Results: Data analysis showed that though all the cases of the recession were classified by Kumar and Masamatti's classification, only 34.61% cases were classified by Miller's classification. 19.10% cases were completely (having only labial/buccal recession) classified. In 15.51% (out of 34.61%) cases, only buccal recession was classified according to Miller's criteria and included in this category, although these cases had both buccal and lingual/palatal recessions. Furthermore, 29.75% cases of recession with interdental loss and marginal tissue loss coronal to mucogingival junction (MGJ) remained uncategorized by Miller's classification; categorization of palatal/lingual recession was possible with Kumar and Masamatti's classification. Conclusion: The elaborative evaluation of both buccal and palatal/lingual recession by the Kumar and Masamatti's classification system can be used to overcome the limitations of Miller's classification system, especially the cases with interdental loss and having marginal tissue loss coronal to MGJ. PMID:26644724

  20. The 2010 Standard Occupational Classification (SOC): A Classification System Gets an Update

    Science.gov (United States)

    Emmel, Alissa; Cosca, Theresa

    2010-01-01

    Making sense of occupational data isn't always easy. But the task is less daunting when the data are well organized. For Federal occupational statistics, the Standard Occupational Classification (SOC) system establishes that organization. And a recent revision to the SOC means that the data will be current, in addition to being well organized. The…

  1. Review of classification criteria for systemic lupus erythematosus.

    Science.gov (United States)

    Petri, Michelle

    2005-05-01

    The American College of Rheumatology classification criteria were devised in 1982. In 1997, the immunologic disorder criterion was revised by a committee (without validation). All 11 criteria in the American College of Rheumatology criteria set have limitations. One of the most important laboratory tests, hypocomplementemia, was excluded entirely. Other classification criteria, emphasizing weighting or recursive partitioning, exist, but they are more cumbersome. Revised criteria are needed, not just for systemic lupus erythematosus, but also for chronic cutaneous lupus.

  2. Revised Soil Classification System for Coarse-Fine Mixtures

    KAUST Repository

    Park, Junghee

    2017-04-17

    Soil classification systems worldwide capture great physical insight and enable geotechnical engineers to anticipate the properties and behavior of soils by grouping them into similar response categories based on their index properties. Yet gravimetric analysis and data trends summarized from published papers reveal critical limitations in soil group boundaries adopted in current systems. In particular, current classification systems fail to capture the dominant role of fines on the mechanical and hydraulic properties of soils. A revised soil classification system (RSCS) for coarse-fine mixtures is proposed herein. Definitions of classification boundaries use low and high void ratios that gravel, sand, and fines may attain. This research adopts emax and emin for gravels and sands, and three distinctive void ratio values for fines: soft eF|10  kPa and stiff eF|1  MPa for mechanical response (at effective stress 10 kPa and 1 MPa, respectively), and viscous λ⋅eF|LL for fluid flow control, where λ=2log(LL−25) and eF|LL is the void ratio at the liquid limit. For classification purposes, these void ratios can be estimated from index properties such as particle shape, the coefficient of uniformity, and the liquid limit. Analytically computed and data-adjusted boundaries are soil-specific, in contrast with the Unified Soil Classification System (USCS). Threshold fractions for mechanical control and for flow control are quite distinct in the proposed system. Therefore, the RSCS uses a two-name nomenclature whereby the first letters identify the component(s) that controls mechanical properties, followed by a letter (shown in parenthesis) that identifies the component that controls fluid flow. Sample charts in this paper and a Microsoft Excel facilitate the implementation of this revised classification system.

  3. Intelligence system based classification approach for medical disease diagnosis

    Science.gov (United States)

    Sagir, Abdu Masanawa; Sathasivam, Saratha

    2017-08-01

    The prediction of breast cancer in women who have no signs or symptoms of the disease as well as survivability after undergone certain surgery has been a challenging problem for medical researchers. The decision about presence or absence of diseases depends on the physician's intuition, experience and skill for comparing current indicators with previous one than on knowledge rich data hidden in a database. This measure is a very crucial and challenging task. The goal is to predict patient condition by using an adaptive neuro fuzzy inference system (ANFIS) pre-processed by grid partitioning. To achieve an accurate diagnosis at this complex stage of symptom analysis, the physician may need efficient diagnosis system. A framework describes methodology for designing and evaluation of classification performances of two discrete ANFIS systems of hybrid learning algorithms least square estimates with Modified Levenberg-Marquardt and Gradient descent algorithms that can be used by physicians to accelerate diagnosis process. The proposed method's performance was evaluated based on training and test datasets with mammographic mass and Haberman's survival Datasets obtained from benchmarked datasets of University of California at Irvine's (UCI) machine learning repository. The robustness of the performance measuring total accuracy, sensitivity and specificity is examined. In comparison, the proposed method achieves superior performance when compared to conventional ANFIS based gradient descent algorithm and some related existing methods. The software used for the implementation is MATLAB R2014a (version 8.3) and executed in PC Intel Pentium IV E7400 processor with 2.80 GHz speed and 2.0 GB of RAM.

  4. Development of the Gross Motor Function Classification System (1997)

    Science.gov (United States)

    Morris, Christopher

    2008-01-01

    To address the need for a standardized system to classify the gross motor function of children with cerebral palsy, the authors developed a five-level classification system analogous to the staging and grading systems used in medicine. Nominal group process and Delphi survey consensus methods were used to examine content validity and revise the…

  5. Multiphase Systems for Medical Image Region Classification

    Science.gov (United States)

    Garamendi, J. F.; Malpica, N.; Schiavi, E.

    2009-05-01

    Variational methods for region classification have shown very promising results in medical image analysis. The Chan-Vese model is one of the most popular methods, but its numerical resolution is slow and it has serious drawbacks for most multiphase applications. In this work, we extend the link, stablished by Chambolle, between the two classes binary Chan-Vese model and the Rudin-Osher-Fatemi (ROF) model to a multiphase four classes minimal partition problem. We solve the ROF image restoration model and then we threshold the image by means of a genetic algorithm. This strategy allows for a more efficient algorithm due to the fact that only one well posed elliptic problem is solved instead of solving the coupled parabolic equations arising in the original multiphase Chan-Vese model.

  6. Systematic Review and Classification on Video Surveillance Systems

    Directory of Open Access Journals (Sweden)

    Fereshteh Falah Chamasemani

    2013-06-01

    Full Text Available Recently, various conferences and journals have published articles related to Video Surveillance Systems, indicating researchers’ attention. The goal of this review is to examine the latest works were published in journals, propose a new classification framework of video surveillance systems and investigate each aspect of this classification framework. This paper provides a comprehensive and systematic literature review of video surveillance systems from 2010-2011, extracted from six online digital libraries using article’s title and keyword. The proposed classification framework is expanded on the basis of architecture of video surveillance systems, which is composed of six layers: Concept and Foundation Layer, Network Infrastructure Layer, Processing Layer, Communication Layer, Application Layer, and User Interaction Layer. This review shows, although many publication and research focus on real-time aspect of the challenge, only few researches have investigated the deployment of extracted and retrieved information for forensic video surveillance.

  7. Accurate white matter lesion segmentation by k nearest neighbor classification with tissue type priors (kNN-TTPs).

    Science.gov (United States)

    Steenwijk, Martijn D; Pouwels, Petra J W; Daams, Marita; van Dalen, Jan Willem; Caan, Matthan W A; Richard, Edo; Barkhof, Frederik; Vrenken, Hugo

    2013-01-01

    The segmentation and volumetric quantification of white matter (WM) lesions play an important role in monitoring and studying neurological diseases such as multiple sclerosis (MS) or cerebrovascular disease. This is often interactively done using 2D magnetic resonance images. Recent developments in acquisition techniques allow for 3D imaging with much thinner sections, but the large number of images per subject makes manual lesion outlining infeasible. This warrants the need for a reliable automated approach. Here we aimed to improve k nearest neighbor (kNN) classification of WM lesions by optimizing intensity normalization and using spatial tissue type priors (TTPs). The kNN-TTP method used kNN classification with 3.0 T 3DFLAIR and 3DT1 intensities as well as MNI-normalized spatial coordinates as features. Additionally, TTPs were computed by nonlinear registration of data from healthy controls. Intensity features were normalized using variance scaling, robust range normalization or histogram matching. The algorithm was then trained and evaluated using a leave-one-out experiment among 20 patients with MS against a reference segmentation that was created completely manually. The performance of each normalization method was evaluated both with and without TTPs in the feature set. Volumetric agreement was evaluated using intra-class coefficient (ICC), and voxelwise spatial agreement was evaluated using Dice similarity index (SI). Finally, the robustness of the method across different scanners and patient populations was evaluated using an independent sample of elderly subjects with hypertension. The intensity normalization method had a large influence on the segmentation performance, with average SI values ranging from 0.66 to 0.72 when no TTPs were used. Independent of the normalization method, the inclusion of TTPs as features increased performance particularly by reducing the lesion detection error. Best performance was achieved using variance scaled intensity

  8. Magnetic resonance imaging is comparable to computed tomography for determination of glenoid version but does not accurately distinguish between Walch B2 and C classifications.

    Science.gov (United States)

    Lowe, Jeremiah T; Testa, Edward J; Li, Xinning; Miller, Suzanne; DeAngelis, Joseph P; Jawa, Andrew

    2017-04-01

    Computed tomography (CT) scan is the standard for the preoperative assessment of glenoid version and morphology before total shoulder arthroplasty. However, the capacity of magnetic resonance imaging (MRI) to visualize bone morphology has improved with advancing technology. The purpose of this study was to compare the accuracy of MRI to CT for assessment of glenoid version and Walch classification. Three fellowship-trained shoulder surgeons assessed glenoid version and Walch classification of 30 patients with primary shoulder osteoarthritis who received both CT and MRI scans before total shoulder arthroplasty. Version measurements, Walch classification, and observer agreement were compared. Mean glenoid version was -15.5° and -18.6° by CT and MRI, respectively (P = .17). Interobserver reliability coefficients were good for both imaging modalities (CT, 0.73; MRI, 0.62). Intraobserver coefficients were good to excellent for CT (range, 0.76-0.87) and good for MRI (range, 0.75-0.79). For Walch classification, interobserver reliability for both modalities was merely fair, whereas intraobserver reliability was moderate to good. Although identification of type A1, A2, and B1 was nearly identical between CT and MRI, there was observer disagreement on type B2 (P = .001) and C glenoids (P = .03). Specifically, MRI underidentified type B2 and overidentified type C compared with CT. MRI is largely comparable to CT scan for evaluation of the glenoid, with similar measurements of version and identification of less extreme Walch glenoids. However, MRI is less accurate at distinguishing between type B2 and C glenoids. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  9. MetaShot: an accurate workflow for taxon classification of host-associated microbiome from shotgun metagenomic data.

    Science.gov (United States)

    Fosso, B; Santamaria, M; D'Antonio, M; Lovero, D; Corrado, G; Vizza, E; Passaro, N; Garbuglia, A R; Capobianchi, M R; Crescenzi, M; Valiente, G; Pesole, G

    2017-06-01

    Shotgun metagenomics by high-throughput sequencing may allow deep and accurate characterization of host-associated total microbiomes, including bacteria, viruses, protists and fungi. However, the analysis of such sequencing data is still extremely challenging in terms of both overall accuracy and computational efficiency, and current methodologies show substantial variability in misclassification rate and resolution at lower taxonomic ranks or are limited to specific life domains (e.g. only bacteria). We present here MetaShot, a workflow for assessing the total microbiome composition from host-associated shotgun sequence data, and show its overall optimal accuracy performance by analyzing both simulated and real datasets. https://github.com/bfosso/MetaShot. graziano.pesole@uniba.it. Supplementary data are available at Bioinformatics online.

  10. Object Detection and Classification by Decision-Level Fusion for Intelligent Vehicle Systems.

    Science.gov (United States)

    Oh, Sang-Il; Kang, Hang-Bong

    2017-01-22

    To understand driving environments effectively, it is important to achieve accurate detection and classification of objects detected by sensor-based intelligent vehicle systems, which are significantly important tasks. Object detection is performed for the localization of objects, whereas object classification recognizes object classes from detected object regions. For accurate object detection and classification, fusing multiple sensor information into a key component of the representation and perception processes is necessary. In this paper, we propose a new object-detection and classification method using decision-level fusion. We fuse the classification outputs from independent unary classifiers, such as 3D point clouds and image data using a convolutional neural network (CNN). The unary classifiers for the two sensors are the CNN with five layers, which use more than two pre-trained convolutional layers to consider local to global features as data representation. To represent data using convolutional layers, we apply region of interest (ROI) pooling to the outputs of each layer on the object candidate regions generated using object proposal generation to realize color flattening and semantic grouping for charge-coupled device and Light Detection And Ranging (LiDAR) sensors. We evaluate our proposed method on a KITTI benchmark dataset to detect and classify three object classes: cars, pedestrians and cyclists. The evaluation results show that the proposed method achieves better performance than the previous methods. Our proposed method extracted approximately 500 proposals on a 1226 × 370 image, whereas the original selective search method extracted approximately 10 6 × n proposals. We obtained classification performance with 77.72% mean average precision over the entirety of the classes in the moderate detection level of the KITTI benchmark dataset.

  11. What's behind the Biological Classification System in Use Today?

    Science.gov (United States)

    Robertson, William C.

    2010-01-01

    Whether students should memorize classification schemes (taxonomies) is a column in itself, but the author can address the role that this system plays in the study of biology. To that end, it will help to address how the system developed over time. And toward "that" end, you will do a simple activity to start. (Contains 3 figures.)

  12. Fast, Simple and Accurate Handwritten Digit Classification by Training Shallow Neural Network Classifiers with the 'Extreme Learning Machine' Algorithm.

    Science.gov (United States)

    McDonnell, Mark D; Tissera, Migel D; Vladusich, Tony; van Schaik, André; Tapson, Jonathan

    2015-01-01

    Recent advances in training deep (multi-layer) architectures have inspired a renaissance in neural network use. For example, deep convolutional networks are becoming the default option for difficult tasks on large datasets, such as image and speech recognition. However, here we show that error rates below 1% on the MNIST handwritten digit benchmark can be replicated with shallow non-convolutional neural networks. This is achieved by training such networks using the 'Extreme Learning Machine' (ELM) approach, which also enables a very rapid training time (∼ 10 minutes). Adding distortions, as is common practise for MNIST, reduces error rates even further. Our methods are also shown to be capable of achieving less than 5.5% error rates on the NORB image database. To achieve these results, we introduce several enhancements to the standard ELM algorithm, which individually and in combination can significantly improve performance. The main innovation is to ensure each hidden-unit operates only on a randomly sized and positioned patch of each image. This form of random 'receptive field' sampling of the input ensures the input weight matrix is sparse, with about 90% of weights equal to zero. Furthermore, combining our methods with a small number of iterations of a single-batch backpropagation method can significantly reduce the number of hidden-units required to achieve a particular performance. Our close to state-of-the-art results for MNIST and NORB suggest that the ease of use and accuracy of the ELM algorithm for designing a single-hidden-layer neural network classifier should cause it to be given greater consideration either as a standalone method for simpler problems, or as the final classification stage in deep neural networks applied to more difficult problems.

  13. Fast, Simple and Accurate Handwritten Digit Classification by Training Shallow Neural Network Classifiers with the 'Extreme Learning Machine' Algorithm.

    Directory of Open Access Journals (Sweden)

    Mark D McDonnell

    Full Text Available Recent advances in training deep (multi-layer architectures have inspired a renaissance in neural network use. For example, deep convolutional networks are becoming the default option for difficult tasks on large datasets, such as image and speech recognition. However, here we show that error rates below 1% on the MNIST handwritten digit benchmark can be replicated with shallow non-convolutional neural networks. This is achieved by training such networks using the 'Extreme Learning Machine' (ELM approach, which also enables a very rapid training time (∼ 10 minutes. Adding distortions, as is common practise for MNIST, reduces error rates even further. Our methods are also shown to be capable of achieving less than 5.5% error rates on the NORB image database. To achieve these results, we introduce several enhancements to the standard ELM algorithm, which individually and in combination can significantly improve performance. The main innovation is to ensure each hidden-unit operates only on a randomly sized and positioned patch of each image. This form of random 'receptive field' sampling of the input ensures the input weight matrix is sparse, with about 90% of weights equal to zero. Furthermore, combining our methods with a small number of iterations of a single-batch backpropagation method can significantly reduce the number of hidden-units required to achieve a particular performance. Our close to state-of-the-art results for MNIST and NORB suggest that the ease of use and accuracy of the ELM algorithm for designing a single-hidden-layer neural network classifier should cause it to be given greater consideration either as a standalone method for simpler problems, or as the final classification stage in deep neural networks applied to more difficult problems.

  14. Low-cost real-time automatic wheel classification system

    Science.gov (United States)

    Shabestari, Behrouz N.; Miller, John W. V.; Wedding, Victoria

    1992-11-01

    This paper describes the design and implementation of a low-cost machine vision system for identifying various types of automotive wheels which are manufactured in several styles and sizes. In this application, a variety of wheels travel on a conveyor in random order through a number of processing steps. One of these processes requires the identification of the wheel type which was performed manually by an operator. A vision system was designed to provide the required identification. The system consisted of an annular illumination source, a CCD TV camera, frame grabber, and 386-compatible computer. Statistical pattern recognition techniques were used to provide robust classification as well as a simple means for adding new wheel designs to the system. Maintenance of the system can be performed by plant personnel with minimal training. The basic steps for identification include image acquisition, segmentation of the regions of interest, extraction of selected features, and classification. The vision system has been installed in a plant and has proven to be extremely effective. The system properly identifies the wheels correctly up to 30 wheels per minute regardless of rotational orientation in the camera's field of view. Correct classification can even be achieved if a portion of the wheel is blocked off from the camera. Significant cost savings have been achieved by a reduction in scrap associated with incorrect manual classification as well as a reduction of labor in a tedious task.

  15. Intelligent Decision Support System for Bank Loans Risk Classification

    Institute of Scientific and Technical Information of China (English)

    杨保安; 马云飞; 俞莲

    2001-01-01

    Intelligent Decision Support System (IISS) for Bank Loans Risk Classification (BLRC), based on the way of integration Artificial Neural Network (ANN) and Expert System (ES), is proposed. According to the feature of BLRC, the key financial and non-financial factors are analyzed. Meanwhile, ES and Model Base (MB) which contain ANN are designed . The general framework,interaction and integration of the system are given. In addition, how the system realizes BLRC is elucidated in detail.

  16. Advances in metals classification under the United Nations globally harmonized system of classification and labeling.

    Science.gov (United States)

    Skeaff, James; Adams, William J; Rodriguez, Patricio; Brouwers, Tony; Waeterschoot, Hugo

    2011-10-01

    This article shows how regulatory obligations mandated for metal substances can be met with a laboratory-based transformation/dissolution (T/D) method for deriving relevant hazard classification outcomes, which can then be linked to attendant environmental protection management decisions. We report the results of a ring-test at 3 laboratories conducted to determine the interlaboratory precision of the United Nations T/D Protocol (T/DP) in generating data for classifying 4 metal-bearing substances for acute and chronic toxicity under the United Nations Globally Harmonized System of Classification and Labelling (GHS) criteria with respect to the aquatic environment. The test substances were Ni metal powder, cuprous oxide (Cu(2) O) powder, tricobalt tetroxide (Co(3) O(4) ) powder, and cuttings of a NILO K Ni-Co-Fe alloy. Following GHS Annex 10 guidelines, we tested 3 loadings (1, 10, and 100 mg/L) of each substance at pH 6 and 8 for 7 or 28 d to yield T/D data for acute and chronic classification, respectively. We compared the T/DP results (dissolved metal in aqueous media) against acute and chronic ecotoxicity reference values (ERVs) for each substance to assess GHS classification outcomes. For dissolved metal ions, the respective acute and chronic ERVs established at the time of the T/D testing were: 29 and 8 µg/L for Cu; 185 and 1.5 µg/L for Co; and 13.3 and 1.0 mg/L for Fe. The acute ERVs for Ni were pH-dependent: 120 and 68 µg/L at pH 6 and 8, respectively, whereas the chronic ERV for Ni was 2.4 µg/L. The acute classification outcomes were consistent among 3 laboratories: cuprous oxide, Acute 1; Ni metal powder, Acute 3; Co(3) O(4) and the NILO K alloy, no classification. We obtained similar consistent results in chronic classifications: Cu(2) O, Ni metal powder, and Co(3) O(4) , Chronic 4; and the NILO K alloy, no classification. However, we observed equivocal results only in 2 of a possible 48 cases where the coefficient of variation of final T

  17. Classifications of central solar domestic hot water systems

    Science.gov (United States)

    Guo, J. Y.; Hao, B.; Peng, C.; Wang, S. S.

    2016-08-01

    Currently, there are many means by which to classify solar domestic hot water systems, which are often categorized according to their scope of supply, solar collector positions, and type of heat storage tank. However, the lack of systematic and scientific classification as well as the general disregard of the thermal performance of the auxiliary heat source is important to DHW systems. Thus, the primary focus of this paper is to determine a classification system for solar domestic hot water systems based on the positions of the solar collector and auxiliary heating device, both respectively and in combination. Field-testing data regarding many central solar DHW systems demonstrates that the position of the auxiliary heat source clearly reflects the operational energy consumption. The consumption of collective auxiliary heating hot water system is much higher than individual auxiliary heating hot water system. In addition, costs are significantly reduced by the separation of the heat storage tank and the auxiliary heating device.

  18. Fusion within a classification system family

    Science.gov (United States)

    Oxley, Mark E.; Schubert Kabban, Christine M.

    2017-05-01

    A detection system outputs two distinct labels, thus, there are two errors it can make. The Receiver Operating Characteristic (ROC) function quantifies both of these errors as parameters vary within the system. Combining two detection systems typically yields better performance when a combining rule is chosen appropriately. When detection systems are combined the assumption of independence is usually made in order to simplify the math- ematics, so that we need only combine the individual ROC curve from each system into one ROC curve. This paper investigates label fusion of two detection systems drawn from a single Detection System Family (DSF). Given that one knows the ROC function for the DSF, we seek a formula with the resultant ROC function of the fused detection systems as a function (specifically, a transformation) of the ROC function. In this paper, we derive this transformation for the disjunction and conjunction label rules. Examples are given that demonstrates this transformation. Furthermore, another transformation is given to account for the dependencies between the two systems within the family. Examples will be given that demonstrates these ideas and the corresponding transformation acting on the ROC curve.

  19. Evolution and classification of the CRISPR-Cas systems

    Science.gov (United States)

    S. Makarova, Kira; H. Haft, Daniel; Barrangou, Rodolphe; J. J. Brouns, Stan; Charpentier, Emmanuelle; Horvath, Philippe; Moineau, Sylvain; J. M. Mojica, Francisco; I. Wolf, Yuri; Yakunin, Alexander F.; van der Oost, John; V. Koonin, Eugene

    2012-01-01

    The CRISPR–Cas (clustered regularly interspaced short palindromic repeats–CRISPR-associated proteins) modules are adaptive immunity systems that are present in many archaea and bacteria. These defence systems are encoded by operons that have an extraordinarily diverse architecture and a high rate of evolution for both the cas genes and the unique spacer content. Here, we provide an updated analysis of the evolutionary relationships between CRISPR–Cas systems and Cas proteins. Three major types of CRISPR–Cas system are delineated, with a further division into several subtypes and a few chimeric variants. Given the complexity of the genomic architectures and the extremely dynamic evolution of the CRISPR–Cas systems, a unified classification of these systems should be based on multiple criteria. Accordingly, we propose a `polythetic' classification that integrates the phylogenies of the most common cas genes, the sequence and organization of the CRISPR repeats and the architecture of the CRISPR–cas loci. PMID:21552286

  20. Quality assurance: The 10-Group Classification System (Robson classification), induction of labor, and cesarean delivery.

    LENUS (Irish Health Repository)

    Robson, Michael

    2015-10-01

    Quality assurance in labor and delivery is needed. The method must be simple and consistent, and be of universal value. It needs to be clinically relevant, robust, and prospective, and must incorporate epidemiological variables. The 10-Group Classification System (TGCS) is a simple method providing a common starting point for further detailed analysis within which all perinatal events and outcomes can be measured and compared. The system is demonstrated in the present paper using data for 2013 from the National Maternity Hospital in Dublin, Ireland. Interpretation of the classification can be easily taught. The standard table can provide much insight into the philosophy of care in the population of women studied and also provide information on data quality. With standardization of audit of events and outcomes, any differences in either sizes of groups, events or outcomes can be explained only by poor data collection, significant epidemiological variables, or differences in practice. In April 2015, WHO proposed that the TGCS (also known as the Robson classification) is used as a global standard for assessing, monitoring, and comparing cesarean delivery rates within and between healthcare facilities.

  1. Hotel Classification Systems: A Comparison of International Case Studies

    Directory of Open Access Journals (Sweden)

    Roberta Minazzi,

    2010-12-01

    Full Text Available Over the last few decades we have witnessed an increasing interest of scholars andespecially operators in service quality in the lodging business. Firstly, it is important to observe thatthe diverseness of the hospitality industry also affects the classification of hotel quality. We canactually find many programmes, classifications and seals of quality promoted by public authoritiesand private companies that create confusion in the consumer perceptions of hotel quality. Moreover,new electronic distribution channels and their ratings are becoming a new way to gather informationabout a hotel and its quality. Secondly, a point that can cause complications is that different countriesand regions can choose differing approaches depending on the features of the classification (numberof levels, symbols used, etc. and the nature of the programme (public, private. Considering theseassumptions and the recent changes in the Italian hotel classification system, this paper aims toanalyse the situation in Italy, underlining both its positive and negative aspects and comparing it withother European and North American cases. Based on a review of literature and tourism laws as wellas personal interviews with public authorities and exponents of the private sectors, we were able toidentify critical issues and trends in hotel classification systems. The comparison of case studiesshows a heterogeneous situation. Points in common are the scale and the symbol used but, if weanalyse the requirements of each category, we discover very different circumstances, also sometimesin the same country. A future European classification system could be possible only after astandardization of minimum requirements and criteria at a national level. In this situation brands andonline consumers’ feedbacks become even more considered by the customers in the hospitalityindustry.

  2. Image interpretation for a multilevel land use classification system

    Science.gov (United States)

    1973-01-01

    The potential use is discussed of three remote sensors for developing a four level land use classification system. Three types of imagery for photointerpretation are presented: ERTS-1 satellite imagery, high altitude photography, and medium altitude photography. Suggestions are given as to which remote sensors and imagery scales may be most effectively employed to provide data on specific types of land use.

  3. Towards a regional beef carcass classification system for Southern ...

    African Journals Online (AJOL)

    Mapiye, C, Dr

    2017-05-15

    May 15, 2017 ... Despite their dominance, ... existing systems use carcass yield and quality attributes, but do not predict eating quality ... On the one hand, grading refers to the ... On the other hand, carcass classification refers to the sorting of ..... output variables, which are then evaluated for their relationship to meat quality ...

  4. Classification system for conventional crown and fixed partial denture failures.

    Science.gov (United States)

    Manappallil, John Joy

    2008-04-01

    The dental literature is replete with reports on the many aspects of failure encountered with traditional fixed prosthodontic treatment, including longitudinal survival studies of crowns and fixed partial dentures and reasons for failures. However, criteria for grading or classifying the type and severity of these failures are inadequate. A classification system for conventional fixed prosthodontic failures based on severity is presented.

  5. The Spinal Cord Injury-Interventions Classification System

    NARCIS (Netherlands)

    van Langeveld, A.H.B.

    2010-01-01

    Title: The Spinal Cord Injury-Interventions Classification System: development and evaluation of a documentation tool to record therapy to improve mobility and self-care in people with spinal cord injury. Background: Many rehabilitation researchers have emphasized the need to examine the actual cont

  6. Group Classification of a Generalized Lane-Emden System

    Directory of Open Access Journals (Sweden)

    Ben Muatjetjeja

    2013-01-01

    Full Text Available We perform the group classification of the generalized Lane-Emden system xu′′+nu′+xHv=0,  xv′′+nv′+xgu=0, which occurs in many applications of physical phenomena such as pattern formation, population evolution, and chemical reactions. We obtain four cases depending on the values of n.

  7. The Spinal Cord Injury-Interventions Classification System

    NARCIS (Netherlands)

    van Langeveld, A.H.B.|info:eu-repo/dai/nl/304811416

    2010-01-01

    Title: The Spinal Cord Injury-Interventions Classification System: development and evaluation of a documentation tool to record therapy to improve mobility and self-care in people with spinal cord injury. Background: Many rehabilitation researchers have emphasized the need to examine the actual

  8. Standard practice for classification of computed radiology systems

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This practice describes the evaluation and classification of a computed radiography (CR) system, a particular phosphor imaging plate (IP), system scanner and software, in combination with specified metal screens for industrial radiography. It is intended to ensure that the evaluation of image quality, as far as this is influenced by the scanner/IP system, meets the needs of users. 1.2 The practice defines system tests to be used to classify the systems of different suppliers and make them comparable for users. 1.3 The CR system performance is described by signal and noise parameters. For film systems, the signal is represented by gradient and the noise by granularity. The signal-to-noise ratio is normalized by the basic spatial resolution of the system and is part of classification. The normalization is given by the scanning aperture of 100 µm diameter for the micro-photometer, which is defined in Test Method E1815 for film system classification. This practice describes how the parameters shall be meas...

  9. BIOPHARMACEUTICS CLASSIFICATION SYSTEM: A STRATEGIC TOOL FOR CLASSIFYING DRUG SUBSTANCES

    Directory of Open Access Journals (Sweden)

    Rohilla Seema

    2011-07-01

    Full Text Available The biopharmaceutical classification system (BCS is a scientific approach for classifying drug substances based on their dose/solubility ratio and intestinal permeability. The BCS has been developed to allow prediction of in vivo pharmacokinetic performance of drug products from measurements of permeability and solubility. Moreover, the drugs can be categorized into four classes of BCS on the basis of permeability and solubility namely; high permeability high solubility, high permeability low solubility, low permeability high solubility and low permeability low solubility. The present review summarizes the principles, objectives, benefits, classification and applications of BCS.

  10. An Automated and Intelligent Medical Decision Support System for Brain MRI Scans Classification.

    Directory of Open Access Journals (Sweden)

    Muhammad Faisal Siddiqui

    Full Text Available A wide interest has been observed in the medical health care applications that interpret neuroimaging scans by machine learning systems. This research proposes an intelligent, automatic, accurate, and robust classification technique to classify the human brain magnetic resonance image (MRI as normal or abnormal, to cater down the human error during identifying the diseases in brain MRIs. In this study, fast discrete wavelet transform (DWT, principal component analysis (PCA, and least squares support vector machine (LS-SVM are used as basic components. Firstly, fast DWT is employed to extract the salient features of brain MRI, followed by PCA, which reduces the dimensions of the features. These reduced feature vectors also shrink the memory storage consumption by 99.5%. At last, an advanced classification technique based on LS-SVM is applied to brain MR image classification using reduced features. For improving the efficiency, LS-SVM is used with non-linear radial basis function (RBF kernel. The proposed algorithm intelligently determines the optimized values of the hyper-parameters of the RBF kernel and also applied k-fold stratified cross validation to enhance the generalization of the system. The method was tested by 340 patients' benchmark datasets of T1-weighted and T2-weighted scans. From the analysis of experimental results and performance comparisons, it is observed that the proposed medical decision support system outperformed all other modern classifiers and achieves 100% accuracy rate (specificity/sensitivity 100%/100%. Furthermore, in terms of computation time, the proposed technique is significantly faster than the recent well-known methods, and it improves the efficiency by 71%, 3%, and 4% on feature extraction stage, feature reduction stage, and classification stage, respectively. These results indicate that the proposed well-trained machine learning system has the potential to make accurate predictions about brain abnormalities

  11. An Automated and Intelligent Medical Decision Support System for Brain MRI Scans Classification.

    Science.gov (United States)

    Siddiqui, Muhammad Faisal; Reza, Ahmed Wasif; Kanesan, Jeevan

    2015-01-01

    A wide interest has been observed in the medical health care applications that interpret neuroimaging scans by machine learning systems. This research proposes an intelligent, automatic, accurate, and robust classification technique to classify the human brain magnetic resonance image (MRI) as normal or abnormal, to cater down the human error during identifying the diseases in brain MRIs. In this study, fast discrete wavelet transform (DWT), principal component analysis (PCA), and least squares support vector machine (LS-SVM) are used as basic components. Firstly, fast DWT is employed to extract the salient features of brain MRI, followed by PCA, which reduces the dimensions of the features. These reduced feature vectors also shrink the memory storage consumption by 99.5%. At last, an advanced classification technique based on LS-SVM is applied to brain MR image classification using reduced features. For improving the efficiency, LS-SVM is used with non-linear radial basis function (RBF) kernel. The proposed algorithm intelligently determines the optimized values of the hyper-parameters of the RBF kernel and also applied k-fold stratified cross validation to enhance the generalization of the system. The method was tested by 340 patients' benchmark datasets of T1-weighted and T2-weighted scans. From the analysis of experimental results and performance comparisons, it is observed that the proposed medical decision support system outperformed all other modern classifiers and achieves 100% accuracy rate (specificity/sensitivity 100%/100%). Furthermore, in terms of computation time, the proposed technique is significantly faster than the recent well-known methods, and it improves the efficiency by 71%, 3%, and 4% on feature extraction stage, feature reduction stage, and classification stage, respectively. These results indicate that the proposed well-trained machine learning system has the potential to make accurate predictions about brain abnormalities from the

  12. Video Analytics Algorithm for Automatic Vehicle Classification (Intelligent Transport System

    Directory of Open Access Journals (Sweden)

    ArtaIftikhar

    2013-04-01

    Full Text Available Automated Vehicle detection and classification is an important component of intelligent transport system. Due to significant importance in various fields such as traffic accidents avoidance, toll collection, congestion avoidance, terrorist activities monitoring, security and surveillance systems, intelligent transport system has become important field of study. Various technologies have been used for detecting and classifying vehicles automatically. Automated vehicle detection is broadly divided into two types- Hardware based and software based detection. Various algorithms have been implemented to classify different vehicles from videos. In this paper an efficient and economical solution for automatic vehicle detection and classification is proposed. The proposed system first isolates the object through background subtraction followed by vehicle detection using ontology. Vehicle detection is based on low level features such as shape, size, and spatial location. Finally system classifies vehicles into one of the known classes of vehicle based on size.

  13. Intrusion Detection System with Hierarchical Different Parallel Classification

    Directory of Open Access Journals (Sweden)

    Behrouz Safaiezadeh

    2015-12-01

    Full Text Available Todays, lives integrated to networks and internet. The needed information is transmitted through networks. So, someone may attempt to abuse the information and attack and make changes by weakness of networks. Intrusion Detection System is a system capable to detect some attacks. The system detects attacks through classifier construction and considering IP in network. The recent researches showed that a fundamental classification cannot be effective lonely and due to its errors, but mixing some classifications provide better efficiency. So, the current study attempt to design three classes of support vector machine, the neural network of multilayer perceptron and parallel fuzzy system in which there are trained dataset and capability to detect two classes. Finally, decisions made by an intermediate network due to type of attack. In the present research, suggested system tested through dataset of KDD99 and results indicated appropriate efficiency 99.71% in average.

  14. A new hybrid intelligent system for accurate detection of Parkinson's disease.

    Science.gov (United States)

    Hariharan, M; Polat, Kemal; Sindhu, R

    2014-03-01

    Elderly people are commonly affected by Parkinson's disease (PD) which is one of the most common neurodegenerative disorders due to the loss of dopamine-producing brain cells. People with PD's (PWP) may have difficulty in walking, talking or completing other simple tasks. Variety of medications is available to treat PD. Recently, researchers have found that voice signals recorded from the PWP is becoming a useful tool to differentiate them from healthy controls. Several dysphonia features, feature reduction/selection techniques and classification algorithms were proposed by researchers in the literature to detect PD. In this paper, hybrid intelligent system is proposed which includes feature pre-processing using Model-based clustering (Gaussian mixture model), feature reduction/selection using principal component analysis (PCA), linear discriminant analysis (LDA), sequential forward selection (SFS) and sequential backward selection (SBS), and classification using three supervised classifiers such as least-square support vector machine (LS-SVM), probabilistic neural network (PNN) and general regression neural network (GRNN). PD dataset was used from University of California-Irvine (UCI) machine learning database. The strength of the proposed method has been evaluated through several performance measures. The experimental results show that the combination of feature pre-processing, feature reduction/selection methods and classification gives a maximum classification accuracy of 100% for the Parkinson's dataset. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  15. Outpatient costing and classification: are we any closer toa national standard for ambulatory classification systems?

    Science.gov (United States)

    Cleary, M I; Murray, J M; Michael, R; Piper, K

    1998-10-19

    The Outpatient Costing and Classification Study was commissioned by the Department of Health and Family Services to evaluate the suitability of the Developmental Ambulatory Classification System (DACS). Data on the full range of ambulatory services (outpatient clinics, emergency departments and allied health services) were collected prospectively from a stratified sample of 28 public hospitals. Patient encounters captured in the study represent 1% of the total ambulatory encounters in Australia in one year. Costing per encounter included time spent with the patient, cost of procedures, indirect costs (salaries and consumables), overhead costs and diagnostic costs. The most significant variable explaining cost variation was hospital type, followed by outpatient clinic type. Visit type and presence or absence of a procedure--major splits for the proposed DACS--did not produce splits that were consistent across all hospital strata. The study found that DACS is not an appropriate classification for hospital ambulatory services. A clinic-based structure for outpatients and allied health departments is recommended for classifying and funding ambulatory services in Australia.

  16. Annotation and Classification of CRISPR-Cas Systems.

    Science.gov (United States)

    Makarova, Kira S; Koonin, Eugene V

    2015-01-01

    The clustered regularly interspaced short palindromic repeats (CRISPR)-Cas (CRISPR-associated proteins) is a prokaryotic adaptive immune system that is represented in most archaea and many bacteria. Among the currently known prokaryotic defense systems, the CRISPR-Cas genomic loci show unprecedented complexity and diversity. Classification of CRISPR-Cas variants that would capture their evolutionary relationships to the maximum possible extent is essential for comparative genomic and functional characterization of this theoretically and practically important system of adaptive immunity. To this end, a multipronged approach has been developed that combines phylogenetic analysis of the conserved Cas proteins with comparison of gene repertoires and arrangements in CRISPR-Cas loci. This approach led to the current classification of CRISPR-Cas systems into three distinct types and ten subtypes for each of which signature genes have been identified. Comparative genomic analysis of the CRISPR-Cas systems in new archaeal and bacterial genomes performed over the 3 years elapsed since the development of this classification makes it clear that new types and subtypes of CRISPR-Cas need to be introduced. Moreover, this classification system captures only part of the complexity of CRISPR-Cas organization and evolution, due to the intrinsic modularity and evolutionary mobility of these immunity systems, resulting in numerous recombinant variants. Moreover, most of the cas genes evolve rapidly, complicating the family assignment for many Cas proteins and the use of family profiles for the recognition of CRISPR-Cas subtype signatures. Further progress in the comparative analysis of CRISPR-Cas systems requires integration of the most sensitive sequence comparison tools, protein structure comparison, and refined approaches for comparison of gene neighborhoods.

  17. Multi-robot system learning based on evolutionary classification

    Directory of Open Access Journals (Sweden)

    Manko Sergey

    2016-01-01

    Full Text Available This paper presents a novel machine learning method for agents of a multi-robot system. The learning process is based on knowledge discovery through continual analysis of robot sensory information. We demonstrate that classification trees and evolutionary forests may be a basis for creation of autonomous robots capable both of learning and knowledge exchange with other agents in multi-robot system. The results of experimental studies confirm the effectiveness of the proposed approach.

  18. BASIC PRINCIPLES FOR THE MODERN CLASSIFICATION OF UNMANNED AVIATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    В.П. Харченко

    2012-12-01

    Full Text Available  In view of the basic contemporary classification criteria attempted the classification of unmanned aircraft systems have been attempted  on the basis of available scientific and technical potential, of their applications features,  and prospects for development of information and the aircraft manufacturing technologies. Based on the global trends analysis of unmanned aircraft systems development in determining the prospects for development of unmanned aircraft systems as a class has been discussed the need to use a single general classification system features that reflects the level of functional independence of the aircraft belonging to the UAS and takes into account not only the level of technical excellence, but also the level of development information and logistics systems. The formation principles of unmanned aircraft systems and complexes have been considered due to the UAC development problems, including the issues of the complex architectonics, its full composition, unmanned aircraft controlling methods, and the procedures for the unmanned aviation complex use as a whole taking into account the peculiarities the different UAVs categories application.

  19. Automatic counterfeit protection system code classification

    Science.gov (United States)

    Van Beusekom, Joost; Schreyer, Marco; Breuel, Thomas M.

    2010-01-01

    Wide availability of cheap high-quality printing techniques make document forgery an easy task that can easily be done by most people using standard computer and printing hardware. To prevent the use of color laser printers or color copiers for counterfeiting e.g. money or other valuable documents, many of these machines print Counterfeit Protection System (CPS) codes on the page. These small yellow dots encode information about the specific printer and allow the questioned document examiner in cooperation with the manufacturers to track down the printer that was used to generate the document. However, the access to the methods to decode the tracking dots pattern is restricted. The exact decoding of a tracking pattern is often not necessary, as tracking the pattern down to the printer class may be enough. In this paper we present a method that detects what CPS pattern class was used in a given document. This can be used to specify the printer class that the document was printed on. Evaluation proved an accuracy of up to 91%.

  20. [Construction of biopharmaceutics classification system of Chinese materia medica].

    Science.gov (United States)

    Liu, Yang; Wei, Li; Dong, Ling; Zhu, Mei-Ling; Tang, Ming-Min; Zhang, Lei

    2014-12-01

    Based on the characteristics of multicomponent of traditional Chinese medicine and drawing lessons from the concepts, methods and techniques of biopharmaceutics classification system (BCS) in chemical field, this study comes up with the science framework of biopharmaceutics classification system of Chinese materia medica (CMMBCS). Using the different comparison method of multicomponent level and the CMMBCS method of overall traditional Chinese medicine, the study constructs the method process while setting forth academic thoughts and analyzing theory. The basic role of this system is clear to reveal the interaction and the related absorption mechanism of multicomponent in traditional Chinese medicine. It also provides new ideas and methods for improving the quality of Chinese materia medica and the development of new drug research.

  1. General classification handbook for floodplain vegetation in large river systems

    Science.gov (United States)

    Dieck, Jennifer J.; Ruhser, Janis; Hoy, Erin E.; Robinson, Larry R.

    2015-01-01

    This handbook describes the General Wetland Vegetation Classification System developed as part of the U.S. Army Corps of Engineers’ Upper Mississippi River Restoration (UMRR) Program, Long Term Resource Monitoring (LTRM) element. The UMRR is a cooperative effort between the U.S. Army Corps of Engineers, U.S. Geological Survey, U.S. Fish and Wildlife Service, and the states of Illinois, Iowa, Minnesota, Missouri, and Wisconsin. The classification system consists of 31 general map classes and has been used to create systemic vegetation data layers throughout the diverse Upper Mississippi River System (UMRS), which includes the commercially navigable reaches of the Mississippi River from Minneapolis, Minnesota, in the north to Cairo, Illinois, in the south, the Illinois River, and navigable portions of the Kaskaskia, Black, St. Croix, and Minnesota Rivers. In addition, this handbook describes the evolution of the General Wetland Vegetation Classification System, discusses the process of creating a vegetation data layer, and describes each of the 31 map classes in detail. The handbook also acts as a pictorial guide to each of the map classes as they may appear in the field, as well as on color-infrared imagery. This version is an update to the original handbook published in 2004.

  2. Classification of anthropogenic soils by new diagnostic criteria involved in the Slovak Soil Classification System (2014)

    Science.gov (United States)

    Sobocká, Jaroslava; Balkovič, Juraj; Bedrna, Zoltán

    2017-04-01

    Anthropogenic soils can be found mostly in SUITMA areas. The issue of adequate and correct description and classification of these soils occurs very often and can result in inconsistent even in contradictory opinions. In the new version of the anthropogenic soil classification system in Slovakia some new diagnostics criteria were involved and applied for better understanding the inherent nature of these soils. The group of the former anthropogenic soils was divided following scheme of soil reference groups in the WRB 2014 (Anthrozem and Technozem). According to the new version of the Slovak anthropogenic soils classification (2014) there have been distinguished 2 groups of anthropogenic soils: 1) cultivated soils group including 2 soil types (in Slovak terminology): Kultizem and Hortizem and 2) technogenic soils group having 2 soil types: Antrozem and Technozem. Cultivated soil group represents soils developing or forming "in-situ" with diagnostic horizons characterized by human deeply influenced cultivated processes. Technogenic soil group are soils developing like "ex-situ" soils. The key features recognizing technogenic soil group are human-transported and altered material (HTAM = ex-situ aspect), and artefacts content. Diagnostic horizons (top and subsoil) were described as various material affected by physical-mechanical excavation, transportation and spread, mixing, and containing artefacts (the new diagnostic feature). Kultizems are differentiated by cultivated horizon(s) and Technozems by anthropogenic horizon(s). Cultivated horizons are mostly well-known described horizon in many scientific references. Anthropogenic horizons for Technozem are developed from the human-induced transported and altered material which origin is from the other ecological locality that adjacent area. Materials (or substrates) can consist of various material (natural, technogenic or their mixing) with thickness ≥ 60 cm. Artefacts are the second diagnostic feature which presence

  3. Polarimetric synthetic aperture radar image unsupervised classification method based on artificial immune system

    Science.gov (United States)

    Jie, Yu; Gang, Wang; Teng, Zhu; Xiaojuan, Li; Qin, Yan

    2014-01-01

    An unsupervised classification method based on the H/α classifier and artificial immune system (AIS) is proposed to overcome the inefficiencies that arise when traditional classification methods deal with polarimetric synthetic aperture radar (PolSAR) data having large numbers of overlapping pixels and excess polarimetric information. The method is composed of two steps. First, Cloude-Pottier decomposition is used to obtain the entropy H and the scattering angle α. The classification result based on the H/α plane is used to initialize the AIS algorithm. Second, to obtain accurate results, the AIS clonal selection algorithm is used to perform an iterative calculation. As a self-organizing, self-recognizing, and self-optimizing algorithm, the AIS is able to obtain a global optimal solution and better classification results by making use of both the scattering mechanism of ground features and polarimetric scattering characteristics. The effectiveness and feasibility of this method are demonstrated by experiments using a NASA-JPL PolSAR image and a high-resolution PolSAR image of Lingshui autonomous county in Hainan Province.

  4. A comparison of classification methods as diagnostic system: A case study on skin lesions.

    Science.gov (United States)

    Odeh, Suhail M; Baareh, Abdel Karim Mohamed

    2016-12-01

    Numerous classification methods are currently available, but most of them were performed on different datasets. In this paper, different classification techniques were used for a diagnostic system on different skin lesions for the same data, which gives consistency for the data to have more accurate and better results. Four classification methods were proposed, a classical method based on K-Nearest Neighbor with Sequential Scanning selection technique for feature selection, a classical method with complex technique KNN with Genetic Algorithm, a complex method based on Artificial Neural Networks with Genetic Algorithm and an Adaptive Neuro-Fuzzy Inference System. From the results obtained we can say that the performance of KNN with optimization of genetic algorithm for the feature selection was the best with an accuracy rate of 94%. The Adaptive Neuro-Fuzzy Inference System result was also good with an accuracy rate of 92%, and the other techniques' results were also satisfactory. The improvement on the performance of the classifier depends on the feature selection methods. In addition, the diagnosis system as a decision support tool could be used to increase the performance of human experts to make a correct decision. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  5. Preparing for the Use of Classification in Online Cataloging Systems and in Online Catalogs.

    Science.gov (United States)

    Cochrane, Pauline A.; Markey, Karen

    1985-01-01

    Presents overview of library classification and automation (1940-84), including use of Dewey Decimal and Library of Congress classification in online cataloging systems. Highlights include classification number access in existing online catalogs, functions of classification records, specifications for authority file records, and the nature of…

  6. Battery Management Systems: Accurate State-of-Charge Indication for Battery-Powered Applications

    NARCIS (Netherlands)

    Pop, V.; Bergveld, H.J.; Danilov, D.; Regtien, P.P.L.; Notten, P.H.L.

    2008-01-01

    Battery Management Systems – Universal State-of-Charge indication for portable applications describes the field of State-of-Charge (SoC) indication for rechargeable batteries. With the emergence of battery-powered devices with an increasing number of power-hungry features, accurately estimating the

  7. Using an Educational Electronic Documentation System to Help Nursing Students Accurately Identify Nursing Diagnoses

    Science.gov (United States)

    Pobocik, Tamara J.

    2013-01-01

    The use of technology and electronic medical records in healthcare has exponentially increased. This quantitative research project used a pretest/posttest design, and reviewed how an educational electronic documentation system helped nursing students to identify the accurate related to statement of the nursing diagnosis for the patient in the case…

  8. Initial Experimental Result of Accurately Controlled Routinely Operated Signal System (ACROSS)

    Institute of Scientific and Technical Information of China (English)

    Liao Chengwang; Zhuang Cantao; Liang Hongsen

    2003-01-01

    The principle of Accurately Controlled Routinely Operated Signal System (ACROSS) isintroduced in this paper. A sample machine is made and tested. The experiment shows that thesignal-stacking technique is effective in improving signal-to-noise ratio and the sompi cepstrummethod is applicable to deconvolute a set of travel times of wave elements from accuratetransfer function data in frequency domain.

  9. Battery Management Systems: Accurate State-of-Charge Indication for Battery-Powered Applications

    NARCIS (Netherlands)

    Pop, V.; Bergveld, H.J.; Danilov, D.; Regtien, Paulus P.L.; Notten, P.H.L.

    2008-01-01

    Battery Management Systems – Universal State-of-Charge indication for portable applications describes the field of State-of-Charge (SoC) indication for rechargeable batteries. With the emergence of battery-powered devices with an increasing number of power-hungry features, accurately estimating the

  10. Nasal Septal Deviations: A Systematic Review of Classification Systems

    Directory of Open Access Journals (Sweden)

    Jeffrey Teixeira

    2016-01-01

    Full Text Available Objective. To systematically review the international literature for internal nasal septal deviation classification systems and summarize them for clinical and research purposes. Data Sources. Four databases (including PubMed/MEDLINE were systematically searched through December 16, 2015. Methods. Systematic review, adhering to PRISMA. Results. After removal of duplicates, this study screened 952 articles for relevance. A final comprehensive review of 50 articles identified that 15 of these articles met the eligibility criteria. The classification systems defined in these articles included C-shaped, S-shaped, reverse C-shaped, and reverse S-shaped descriptions of the septal deviation in both the cephalocaudal and anteroposterior dimensions. Additional studies reported use of computed tomography and categorized deviation based on predefined locations. Three studies graded the severity of septal deviations based on the amount of deflection. The systems defined in the literature also included an evaluation of nasal septal spurs and perforations. Conclusion. This systematic review ascertained that the majority of the currently published classification systems for internal nasal septal deviations can be summarized by C-shaped or reverse C-shaped, as well as S-shaped or reverse S-shaped deviations in the anteroposterior and cephalocaudal dimensions. For imaging studies, predefined points have been defined along the septum. Common terminology can facilitate future research.

  11. Nasal Septal Deviations: A Systematic Review of Classification Systems

    Science.gov (United States)

    Teixeira, Jeffrey; Certal, Victor; Chang, Edward T.; Camacho, Macario

    2016-01-01

    Objective. To systematically review the international literature for internal nasal septal deviation classification systems and summarize them for clinical and research purposes. Data Sources. Four databases (including PubMed/MEDLINE) were systematically searched through December 16, 2015. Methods. Systematic review, adhering to PRISMA. Results. After removal of duplicates, this study screened 952 articles for relevance. A final comprehensive review of 50 articles identified that 15 of these articles met the eligibility criteria. The classification systems defined in these articles included C-shaped, S-shaped, reverse C-shaped, and reverse S-shaped descriptions of the septal deviation in both the cephalocaudal and anteroposterior dimensions. Additional studies reported use of computed tomography and categorized deviation based on predefined locations. Three studies graded the severity of septal deviations based on the amount of deflection. The systems defined in the literature also included an evaluation of nasal septal spurs and perforations. Conclusion. This systematic review ascertained that the majority of the currently published classification systems for internal nasal septal deviations can be summarized by C-shaped or reverse C-shaped, as well as S-shaped or reverse S-shaped deviations in the anteroposterior and cephalocaudal dimensions. For imaging studies, predefined points have been defined along the septum. Common terminology can facilitate future research. PMID:26933510

  12. Development of an XYZ Digital Camera with Embedded Color Calibration System for Accurate Color Acquisition

    Science.gov (United States)

    Kretkowski, Maciej; Jablonski, Ryszard; Shimodaira, Yoshifumi

    Acquisition of accurate colors is important in the modern era of widespread exchange of electronic multimedia. The variety of device-dependent color spaces causes troubles with accurate color reproduction. In this paper we present the outlines of accomplished digital camera system with device-independent output formed from tristimulus XYZ values. The outstanding accuracy and fidelity of acquired color is achieved in our system by employing an embedded color calibration system based on emissive device generating reference calibration colors with user-defined spectral distribution and chromaticity coordinates. The system was tested by calibrating the camera using 24 reference colors spectrally reproduced from 24 color patches of the Macbeth Chart. The average color difference (CIEDE2000) has been found to be ΔE =0.83, which is an outstanding result compared to commercially available digital cameras.

  13. Derivation and validation of the Systemic Lupus International Collaborating Clinics classification criteria for systemic lupus erythematosus

    DEFF Research Database (Denmark)

    Petri, Michelle; Orbai, Ana-Maria; Alarcón, Graciela S

    2012-01-01

    The Systemic Lupus International Collaborating Clinics (SLICC) group revised and validated the American College of Rheumatology (ACR) systemic lupus erythematosus (SLE) classification criteria in order to improve clinical relevance, meet stringent methodology requirements, and incorporate new kno...

  14. Accurate GPS Time-Linked data Acquisition System (ATLAS II) user's manual.

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Perry L.; Zayas, Jose R.; Ortiz-Moyet, Juan (PrimeCore Systems Inc., Albuquerque, NM)

    2004-02-01

    The Accurate Time-Linked data Acquisition System (ATLAS II) is a small, lightweight, time-synchronized, robust data acquisition system that is capable of acquiring simultaneous long-term time-series data from both a wind turbine rotor and ground-based instrumentation. This document is a user's manual for the ATLAS II hardware and software. It describes the hardware and software components of ATLAS II, and explains how to install and execute the software.

  15. Classification of Transient Phenomena in Distribution System using wavelet Transform

    Science.gov (United States)

    Sedighi, Alireza

    2014-05-01

    An efficient procedure for classification of transient phenomena in distribution systems is proposed in this paper. The proposed method has been applied to classify some transient phenomena such as inrush current, load switching, capacitor switching and single phase to ground fault. The new scheme is based on wavelet transform algorithm. All of the events for feature extraction and test are simulated using Electro Magnetic Transient Program (EMTP). Results show high accuracy of proposed method.

  16. Global topological classification of Lotka-Volterra quadratic differential systems

    Directory of Open Access Journals (Sweden)

    Dana Schlomiuk

    2012-04-01

    Full Text Available The Lotka-Volterra planar quadratic differential systems have numerous applications but the global study of this class proved to be a challenge difficult to handle. Indeed, the four attempts to classify them (Reyn (1987, W"orz-Buserkros (1993, Georgescu (2007 and Cao and Jiang (2008 produced results which are not in agreement. The lack of adequate global classification tools for the large number of phase portraits encountered, explains this situation. All Lotka-Volterra systems possess invariant straight lines, each with its own multiplicity. In this article we use as a global classification tool for Lotka-Volterra systems the concept of configuration of invariant lines (including the line at infinity. The class splits according to the types of configurations in smaller subclasses which makes it easier to have a good control over the phase portraits in each subclass. At the same time the classification becomes more transparent and easier to grasp. We obtain a total of 112 topologically distinct phase portraits: 60 of them with exactly three invariant lines, all simple; 27 portraits with invariant lines with total multiplicity at least four; 5 with the line at infinity filled up with singularities; 20 phase portraits of degenerate systems. We also make a thorough analysis of the results in the paper of Cao and Jiang [13]. In contrast to the results on the classification in [13], done in terms of inequalities on the coefficients of normal forms, we construct invariant criteria for distinguishing these portraits in the whole parameter space $mathbb{R}^{12}$ of coefficients.

  17. THE BIOPHARMACEUTICAL CLASSIFICATION SYSTEM (BCS: PRESENT STATUS AND FUTURE PROSPECTIVES

    Directory of Open Access Journals (Sweden)

    Budhwaar Vikaas

    2012-09-01

    Full Text Available The Biopharmaceutical classification system (BCS was introduced By Amidon et al., (1995 as a method for classifying drug substances based on their dose/solubility ratio and intestinal permeability. It allows predicting the in vivo pharmacokinetic performance of drug products. The drug can be categorized into four classes of BCS, namely, High solubility high permeability, low solubility high permeability, High solubility low permeability and low solubility low permeability. An objective of BCS approach is to determine the equilibrium solubility of drug substances under physiological environment. The BCS helps in mathematically analyzing the kinetics and dynamics of drug in gastrointestinal tract (GIT for New Drug Applications (NDA and Abbreviated New Drug Applications (ANDA filings and biowaivers. This step reduces time in the new drug development process. Further it helps to decide when the dissolution rate is likely to be the rate determining step. It also helps in the prediction of potential of inactive ingredients in the dosage form to alter the dissolution / absorption of the drug. The present review, apart from giving a brief overview of BCS classification system, highlights these and some of the more recent applications of BCS classification system.

  18. A Biochar Classification System and Associated Test Methods

    Energy Technology Data Exchange (ETDEWEB)

    Camps-Arbestain, Marta; Amonette, James E.; Singh, Balwant; Wang, Tao; Schmidt, Hans-Peter

    2015-02-18

    In this chapter, a biochar classification system related to its use as soil amendment is proposed. This document builds upon previous work and constrains its scope to materials with properties that satisfy the criteria for biochar as defined by either the International Biochar Initiative (IBI) Biochar Standards or the European Biochar Community (EBC) Standards, and it is intended to minimise the need for testing in addition to those required according to the above-mentioned standards. The classification system envisions enabling stakeholders and commercial entities to (i) identify the most suitable biochar to fulfil the requirements for a particular soil and/or land-use, and (ii) distinguish the application of biochar for specific niches (e.g., soilless agriculture). It is based on the best current knowledge and the intention is to periodically review and update the document based on new data and knowledge that become available in the scientific literature. The main thrust of this classification system is based on the direct or indirect beneficial effects that biochar provides from its application to soil. We have classified the potential beneficial effects of biochar application to soils into five categories with their corresponding classes, where applicable: (i) carbon (C) storage value, (ii) fertiliser value, (iii) liming value, (iv) particle-size, and (v) use in soil-less agriculture. A summary of recommended test methods is provided at the end of the chapter.

  19. Which is a more accurate predictor in colorectal survival analysis? Nine data mining algorithms vs. the TNM staging system.

    Science.gov (United States)

    Gao, Peng; Zhou, Xin; Wang, Zhen-ning; Song, Yong-xi; Tong, Lin-lin; Xu, Ying-ying; Yue, Zhen-yu; Xu, Hui-mian

    2012-01-01

    Over the past decades, many studies have used data mining technology to predict the 5-year survival rate of colorectal cancer, but there have been few reports that compared multiple data mining algorithms to the TNM classification of malignant tumors (TNM) staging system using a dataset in which the training and testing data were from different sources. Here we compared nine data mining algorithms to the TNM staging system for colorectal survival analysis. Two different datasets were used: 1) the National Cancer Institute's Surveillance, Epidemiology, and End Results dataset; and 2) the dataset from a single Chinese institution. An optimization and prediction system based on nine data mining algorithms as well as two variable selection methods was implemented. The TNM staging system was based on the 7(th) edition of the American Joint Committee on Cancer TNM staging system. When the training and testing data were from the same sources, all algorithms had slight advantages over the TNM staging system in predictive accuracy. When the data were from different sources, only four algorithms (logistic regression, general regression neural network, bayesian networks, and Naïve Bayes) had slight advantages over the TNM staging system. Also, there was no significant differences among all the algorithms (p>0.05). The TNM staging system is simple and practical at present, and data mining methods are not accurate enough to replace the TNM staging system for colorectal cancer survival prediction. Furthermore, there were no significant differences in the predictive accuracy of all the algorithms when the data were from different sources. Building a larger dataset that includes more variables may be important for furthering predictive accuracy.

  20. On the Origins of the Quinarian System of Classification.

    Science.gov (United States)

    Novick, Aaron

    2016-02-01

    William Sharp Macleay developed the quinarian system of classification in his Horæ Entomologicæ, published in two parts in 1819 and 1821. For two decades, the quinarian system was widely discussed in Britain and influenced such naturalists as Charles Darwin, Richard Owen, and Thomas Huxley. This paper offers the first detailed account of Macleay's development of the quinarian system. Macleay developed his system under the shaping influence of two pressures: (1) the insistence by followers of Linnaeus on developing artificial systems at the expense of the natural system and (2) the apparent tension between the continuity of organic nature and the failure of linear classification schemes (which continuity seemed to require). Against what he perceived as dogmatic indolence on the part of the Linnaeans, Macleay developed a philosophy of science in which hypotheses that exceeded the available evidence should be proposed and subjected to severe tests. He also developed a novel comparative anatomical methodology, the method of variation, to aid in his search for the natural system. Using this method, he developed an intricate system that showed how organic nature could be continuous without being linear. A failure to appreciate these facets of Macleay's thought has led to several misunderstandings of him and his work, most notably that he was an idealist. These misunderstandings are here rebutted.

  1. Accurate one-end fault location for overhead transmission lines in interconnected power systems

    Energy Technology Data Exchange (ETDEWEB)

    Eisa, Amir A.A.; Ramar, K. [Faculty of Engineering, Multimedia University, 63100 Cyberjaya (Malaysia)

    2010-06-15

    This paper presents a new one-end fault location method for overhead transmission lines embedded in a general n-bus interconnected power system. High accuracy in fault location is achieved by using both an accurate distributed parameters model for the faulted transmission line, and a two-bus Thevenin equivalent network model for the power system that accurately accounts for its interconnectivity. The method has been tested using transient fault data obtained from PSCAD/EMTDC simulations of an 11-bus interconnected power system. The results obtained indicate that the method is capable of estimating the fault distance with high accuracy for various fault conditions. They also indicate that method is sensitive to errors in the value of the local bus impedance, but is insensitive to errors in the value of the remote bus impedance. (author)

  2. 5 CFR 9901.231 - Conversion of positions and employees to NSPS classification system.

    Science.gov (United States)

    2010-01-01

    ... NSPS classification system. 9901.231 Section 9901.231 Administrative Personnel DEPARTMENT OF DEFENSE... MANAGEMENT) DEPARTMENT OF DEFENSE NATIONAL SECURITY PERSONNEL SYSTEM (NSPS) Classification Transitional Provisions § 9901.231 Conversion of positions and employees to NSPS classification system. (a)...

  3. 42 CFR 412.10 - Changes in the DRG classification system.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Changes in the DRG classification system. 412.10... § 412.10 Changes in the DRG classification system. (a) General rule. CMS issues changes in the DRG classification system in a Federal Register notice at least annually. Except as specified in paragraphs (c)...

  4. 5 CFR 9701.231 - Conversion of positions and employees to the DHS classification system.

    Science.gov (United States)

    2010-01-01

    ... the DHS classification system. 9701.231 Section 9701.231 Administrative Personnel DEPARTMENT OF... MANAGEMENT) DEPARTMENT OF HOMELAND SECURITY HUMAN RESOURCES MANAGEMENT SYSTEM Classification Transitional Provisions § 9701.231 Conversion of positions and employees to the DHS classification system. (a)...

  5. Computer-implemented system and method for automated and highly accurate plaque analysis, reporting, and visualization

    Science.gov (United States)

    Kemp, James Herbert (Inventor); Talukder, Ashit (Inventor); Lambert, James (Inventor); Lam, Raymond (Inventor)

    2008-01-01

    A computer-implemented system and method of intra-oral analysis for measuring plaque removal is disclosed. The system includes hardware for real-time image acquisition and software to store the acquired images on a patient-by-patient basis. The system implements algorithms to segment teeth of interest from surrounding gum, and uses a real-time image-based morphing procedure to automatically overlay a grid onto each segmented tooth. Pattern recognition methods are used to classify plaque from surrounding gum and enamel, while ignoring glare effects due to the reflection of camera light and ambient light from enamel regions. The system integrates these components into a single software suite with an easy-to-use graphical user interface (GUI) that allows users to do an end-to-end run of a patient record, including tooth segmentation of all teeth, grid morphing of each segmented tooth, and plaque classification of each tooth image.

  6. An alternative respiratory sounds classification system utilizing artificial neural networks

    Directory of Open Access Journals (Sweden)

    Rami J Oweis

    2015-04-01

    Full Text Available Background: Computerized lung sound analysis involves recording lung sound via an electronic device, followed by computer analysis and classification based on specific signal characteristics as non-linearity and nonstationarity caused by air turbulence. An automatic analysis is necessary to avoid dependence on expert skills. Methods: This work revolves around exploiting autocorrelation in the feature extraction stage. All process stages were implemented in MATLAB. The classification process was performed comparatively using both artificial neural networks (ANNs and adaptive neuro-fuzzy inference systems (ANFIS toolboxes. The methods have been applied to 10 different respiratory sounds for classification. Results: The ANN was superior to the ANFIS system and returned superior performance parameters. Its accuracy, specificity, and sensitivity were 98.6%, 100%, and 97.8%, respectively. The obtained parameters showed superiority to many recent approaches. Conclusions: The promising proposed method is an efficient fast tool for the intended purpose as manifested in the performance parameters, specifically, accuracy, specificity, and sensitivity. Furthermore, it may be added that utilizing the autocorrelation function in the feature extraction in such applications results in enhanced performance and avoids undesired computation complexities compared to other techniques.

  7. Development of a classification system for cup anemometers - CLASSCUP

    DEFF Research Database (Denmark)

    Friis Pedersen, Troels

    2003-01-01

    Errors associated with the measurements of the wind speed are the major sources of uncertainties in power performance testing of wind turbines. Field comparisons of well-calibrated anemometers show a significant and not acceptable difference. TheEuropean CLASSCUP research project posed the object......Errors associated with the measurements of the wind speed are the major sources of uncertainties in power performance testing of wind turbines. Field comparisons of well-calibrated anemometers show a significant and not acceptable difference. TheEuropean CLASSCUP research project posed...... the objectives to quantify the errors associated with the use of cup anemometers, and to determine the requirements for an optimum design of a cup anemometer, and to develop a classification system forquantification of systematic errors of cup anemometers. The present report describes this proposed...... classification system. A classification method for cup anemometers has been developed, which proposes general external operational ranges to be used. Anormal category range connected to ideal sites of the IEC power performance standard was made, and another extended category range for complex terrain...

  8. Improved Classification Methods for Brain Computer Interface System

    Directory of Open Access Journals (Sweden)

    YI Fang

    2012-03-01

    Full Text Available Brain computer interface (BCI aims at providing a new communication way without brain’s normal output through nerve and muscle. The electroencephalography (EEG has been widely used for BCI system because it is a non-invasive approach. For the EEG signals of left and right hand motor imagery, the event-related desynchronization (ERD and event-related synchronization(ERS are used as classification features in this paper. The raw data are transformed by nonlinear methods and classified by Fisher classifier. Compared with the linear methods, the classification accuracy can get an obvious increase to 86.25%. Two different nonlinear transform were arised and one of them is under the consideration of the relativity of two channels of EEG signals. With these nonlinear transform, the performance are also stable with the balance of two misclassifications.

  9. An Automated Artificial Neural Network System for Land Use/Land Cover Classification from Landsat TM Imagery

    Directory of Open Access Journals (Sweden)

    Siamak Khorram

    2009-07-01

    Full Text Available This paper focuses on an automated ANN classification system consisting of two modules: an unsupervised Kohonen’s Self-Organizing Mapping (SOM neural network module, and a supervised Multilayer Perceptron (MLP neural network module using the Backpropagation (BP training algorithm. Two training algorithms were provided for the SOM network module: the standard SOM, and a refined SOM learning algorithm which incorporated Simulated Annealing (SA. The ability of our automated ANN system to perform Land-Use/Land-Cover (LU/LC classifications of a Landsat Thematic Mapper (TM image was tested using a supervised MLP network, an unsupervised SOM network, and a combination of SOM with SA network. Our case study demonstrated that the ANN classification system fulfilled the tasks of network training pattern creation, network training, and network generalization. The results from the three networks were assessed via a comparison with reference data derived from the high spatial resolution Digital Colour Infrared (CIR Digital Orthophoto Quarter Quad (DOQQ data. The supervised MLP network obtained the most accurate classification accuracy as compared to the two unsupervised SOM networks. Additionally, the classification performance of the refined SOM network was found to be significantly better than that of the standard SOM network essentially due to the incorporation of SA. This is mainly due to the SA-assisted classification utilizing the scheduling cooling scheme. It is concluded that our automated ANN classification system can be utilized for LU/LC applications and will be particularly useful when traditional statistical classification methods are not suitable due to a statistically abnormal distribution of the input data.

  10. Development of an Accurate Urban Modeling System Using CAD/GIS Data for Atmosphere Environmental Simulation

    Institute of Scientific and Technical Information of China (English)

    Tomosato Takada; Kazuo Kashiyama

    2008-01-01

    This paper presents an urban modeling system using CAD/GIS data for atmosphere environ- mental simulation, such as wind flow and contaminant spread in urban area. The CAD data is used for the shape modeling for the high-storied buildings and civil structures with complicated shape since the data for that is not included in the 3D-GIS data accurately. The unstructured mesh based on the tetrahedron element is employed in order to express the urban structures with complicated shape accurately. It is difficult to un- derstand the quality of shape model and mesh by the conventional visualization technique. In this paper, the stereoscopic visualization using virtual reality (VR) technology is employed for the vedfication of the quality of shape model and mesh. The present system is applied to the atmosphere environmental simulation in ur- ban area and is shown to be an useful planning and design tool to investigate the atmosphere environmental problem.

  11. Feature Selection and Parameters Optimization of SVM Using Particle Swarm Optimization for Fault Classification in Power Distribution Systems

    Directory of Open Access Journals (Sweden)

    Ming-Yuan Cho

    2017-01-01

    Full Text Available Fast and accurate fault classification is essential to power system operations. In this paper, in order to classify electrical faults in radial distribution systems, a particle swarm optimization (PSO based support vector machine (SVM classifier has been proposed. The proposed PSO based SVM classifier is able to select appropriate input features and optimize SVM parameters to increase classification accuracy. Further, a time-domain reflectometry (TDR method with a pseudorandom binary sequence (PRBS stimulus has been used to generate a dataset for purposes of classification. The proposed technique has been tested on a typical radial distribution network to identify ten different types of faults considering 12 given input features generated by using Simulink software and MATLAB Toolbox. The success rate of the SVM classifier is over 97%, which demonstrates the effectiveness and high efficiency of the developed method.

  12. Feature Selection and Parameters Optimization of SVM Using Particle Swarm Optimization for Fault Classification in Power Distribution Systems.

    Science.gov (United States)

    Cho, Ming-Yuan; Hoang, Thi Thom

    2017-01-01

    Fast and accurate fault classification is essential to power system operations. In this paper, in order to classify electrical faults in radial distribution systems, a particle swarm optimization (PSO) based support vector machine (SVM) classifier has been proposed. The proposed PSO based SVM classifier is able to select appropriate input features and optimize SVM parameters to increase classification accuracy. Further, a time-domain reflectometry (TDR) method with a pseudorandom binary sequence (PRBS) stimulus has been used to generate a dataset for purposes of classification. The proposed technique has been tested on a typical radial distribution network to identify ten different types of faults considering 12 given input features generated by using Simulink software and MATLAB Toolbox. The success rate of the SVM classifier is over 97%, which demonstrates the effectiveness and high efficiency of the developed method.

  13. The influence of spine surgeons' experience on the classification and intraobserver reliability of the novel AOSpine thoracolumbar spine injury classification system : an international study

    NARCIS (Netherlands)

    Sadiqi, Said; Oner, F. Cumhur; Dvorak, Marcel F.; Aarabi, Bizhan; Schroeder, Gregory D.; Vaccaro, Alexander R.

    2015-01-01

    Study Design. International validation study. Objective. To investigate the influence of the spine surgeons' level of experience on the intraobserver reliability of the novel AOSpine Thoracolumbar Spine Injury Classification system, and the appropriate classification according to this system. Summar

  14. Neighborhood Hypergraph Based Classification Algorithm for Incomplete Information System

    Directory of Open Access Journals (Sweden)

    Feng Hu

    2015-01-01

    Full Text Available The problem of classification in incomplete information system is a hot issue in intelligent information processing. Hypergraph is a new intelligent method for machine learning. However, it is hard to process the incomplete information system by the traditional hypergraph, which is due to two reasons: (1 the hyperedges are generated randomly in traditional hypergraph model; (2 the existing methods are unsuitable to deal with incomplete information system, for the sake of missing values in incomplete information system. In this paper, we propose a novel classification algorithm for incomplete information system based on hypergraph model and rough set theory. Firstly, we initialize the hypergraph. Second, we classify the training set by neighborhood hypergraph. Third, under the guidance of rough set, we replace the poor hyperedges. After that, we can obtain a good classifier. The proposed approach is tested on 15 data sets from UCI machine learning repository. Furthermore, it is compared with some existing methods, such as C4.5, SVM, NavieBayes, and KNN. The experimental results show that the proposed algorithm has better performance via Precision, Recall, AUC, and F-measure.

  15. AMD-stability and the classification of planetary systems

    Science.gov (United States)

    Laskar, J.; Petit, A. C.

    2017-09-01

    We present here in full detail the evolution of the angular momentum deficit (AMD) during collisions as it was described in Laskar (2000, Phys. Rev. Lett., 84, 3240). Since then, the AMD has been revealed to be a key parameter for the understanding of the outcome of planetary formation models. We define here the AMD-stability criterion that can be easily verified on a newly discovered planetary system. We show how AMD-stability can be used to establish a classification of the multiplanet systems in order to exhibit the planetary systems that are long-term stable because they are AMD-stable, and those that are AMD-unstable which then require some additional dynamical studies to conclude on their stability. The AMD-stability classification is applied to the 131 multiplanet systems from The Extrasolar Planet Encyclopaedia database for which the orbital elements are sufficiently well known. The AMD-stability coefficients of selected planetary systems are available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/605/A72

  16. 40-Hz ASSR fusion classification system for observing sleep patterns.

    Science.gov (United States)

    Khuwaja, Gulzar A; Haghighi, Sahar Javaher; Hatzinakos, Dimitrios

    2015-12-01

    This paper presents a fusion-based neural network (NN) classification algorithm for 40-Hz auditory steady state response (ASSR) ensemble averaged signals which were recorded from eight human subjects for observing sleep patterns (wakefulness W0 and deep sleep N3 or slow wave sleep SWS). In SWS, sensitivity to pain is the lowest relative to other sleep stages and arousal needs stronger stimuli. 40-Hz ASSR signals were extracted by averaging over 900 sweeps on a 30-s window. Signals generated during N3 deep sleep state show similarities to those produced when general anesthesia is given to patients during clinical surgery. Our experimental results show that the automatic classification system used identifies sleep states with an accuracy rate of 100% when the training and test signals come from the same subjects while its accuracy is reduced to 97.6%, on average, when signals are used from different training and test subjects. Our results may lead to future classification of consciousness and wakefulness of patients with 40-Hz ASSR for observing the depth and effects of general anesthesia (DGA).

  17. Highly accurate and fast optical penetration-based silkworm gender separation system

    Science.gov (United States)

    Kamtongdee, Chakkrit; Sumriddetchkajorn, Sarun; Chanhorm, Sataporn

    2015-07-01

    Based on our research work in the last five years, this paper highlights our innovative optical sensing system that can identify and separate silkworm gender highly suitable for sericulture industry. The key idea relies on our proposed optical penetration concepts and once combined with simple image processing operations leads to high accuracy in identifying of silkworm gender. Inside the system, there are electronic and mechanical parts that assist in controlling the overall system operation, processing the optical signal, and separating the female from male silkworm pupae. With current system performance, we achieve a very highly accurate more than 95% in identifying gender of silkworm pupae with an average system operational speed of 30 silkworm pupae/minute. Three of our systems are already in operation at Thailand's Queen Sirikit Sericulture Centers.

  18. Analytical models and system topologies for remote multispectral data acquisition and classification

    Science.gov (United States)

    Huck, F. O.; Park, S. K.; Burcher, E. E.; Kelly, W. L., IV

    1978-01-01

    Simple analytical models are presented of the radiometric and statistical processes that are involved in multispectral data acquisition and classification. Also presented are basic system topologies which combine remote sensing with data classification. These models and topologies offer a preliminary but systematic step towards the use of computer simulations to analyze remote multispectral data acquisition and classification systems.

  19. Reporting ureteroscopy complications using the modified clavien classification system

    Directory of Open Access Journals (Sweden)

    Ahmed Khalil Ibrahim

    2015-01-01

    Full Text Available Objective: Perioperative complications are one of the surrogate indicators of surgical outcomes. However, reporting these complications need a precise grading system. Our aim is to report and grade the complications of semirigid ureteroscopy in ureteral stone management according to the modified Clavien classification system. Materials and Methods: This is a prospective study conducted From January 2012 to June 2013. All patients with ureteral stones who were indicated for semirigid URS were evaluated. All procedures were performed by the same surgeon. The data recorded including patient demographics, clinical indication, stone size and location, operative time and complications were classified according to the modified Clavien classification system. The patients were followed for 8 weeks postoperatively. Results: 148 patients included, Stone distribution was: 89 (60.1% lower ureteral, 26 (17.6% mid ureteral, and 33 (22.3% upper ureteral. the mean stone size was 8.6 mm. Urgent URS done in 23% of patient. The overall stone free rate was 88.5%, the individual stone free rate for the upper, middle and lower ureter were 87.9%, 84.6%, and 89.9%, respectively. The mean operative time was 31.9 min (20-50 min.. Complications occurred in 26.35% of patients. Grade I complications occurred in 32 patients (26.1%, grade II in 9 (6.1%, grade IIIa in 7 (4.7%, grade IIIb in 8 (5.4%, grade IVa in two patient (1.35%, and grade IVb in one patient (0.7%. No grade V complication was encountered. Conclusion: Ureteroscopy becomes the vanguard interventional therapy for ureteral stones with well-established efficacy and safety. It is of paramount importance to adopt a precise structured classification system for reporting surgical complications, that should be flexible and comprehensive in order to accommodate the various and rapidly expanding surgical fields.

  20. Computer aided decision support system for cervical cancer classification

    Science.gov (United States)

    Rahmadwati, Rahmadwati; Naghdy, Golshah; Ros, Montserrat; Todd, Catherine

    2012-10-01

    Conventional analysis of a cervical histology image, such a pap smear or a biopsy sample, is performed by an expert pathologist manually. This involves inspecting the sample for cellular level abnormalities and determining the spread of the abnormalities. Cancer is graded based on the spread of the abnormal cells. This is a tedious, subjective and time-consuming process with considerable variations in diagnosis between the experts. This paper presents a computer aided decision support system (CADSS) tool to help the pathologists in their examination of the cervical cancer biopsies. The main aim of the proposed CADSS system is to identify abnormalities and quantify cancer grading in a systematic and repeatable manner. The paper proposes three different methods which presents and compares the results using 475 images of cervical biopsies which include normal, three stages of pre cancer, and malignant cases. This paper will explore various components of an effective CADSS; image acquisition, pre-processing, segmentation, feature extraction, classification, grading and disease identification. Cervical histological images are captured using a digital microscope. The images are captured in sufficient resolution to retain enough information for effective classification. Histology images of cervical biopsies consist of three major sections; background, stroma and squamous epithelium. Most diagnostic information are contained within the epithelium region. This paper will present two levels of segmentations; global (macro) and local (micro). At the global level the squamous epithelium is separated from the background and stroma. At the local or cellular level, the nuclei and cytoplasm are segmented for further analysis. Image features that influence the pathologists' decision during the analysis and classification of a cervical biopsy are the nuclei's shape and spread; the ratio of the areas of nuclei and cytoplasm as well as the texture and spread of the abnormalities

  1. Identifying training deficiencies in military pilots by applying the human factors analysis and classification system.

    Science.gov (United States)

    Li, Wen-Chin; Harris, Don

    2013-01-01

    Without accurate analysis, it is difficult to identify training needs and develop the content of training programs required for preventing aviation accidents. The human factors analysis and classification system (HFACS) is based on Reason's system-wide model of human error. In this study, 523 accidents from the Republic of China Air Force were analyzed in which 1762 human errors were categorized. The results of the analysis showed that errors of judgment and poor decision-making were commonly reported amongst pilots. As a result, it was concluded that there was a need for military pilots to be trained specifically in making decisions in tactical environments. However, application of HFACS also allowed the identification of systemic training deficiencies within the organization further contributing to the accidents observed.

  2. Techniques for determining propulsion system forces for accurate high speed vehicle drag measurements in flight

    Science.gov (United States)

    Arnaiz, H. H.

    1975-01-01

    As part of a NASA program to evaluate current methods of predicting the performance of large, supersonic airplanes, the drag of the XB-70 airplane was measured accurately in flight at Mach numbers from 0.75 to 2.5. This paper describes the techniques used to determine engine net thrust and the drag forces charged to the propulsion system that were required for the in-flight drag measurements. The accuracy of the measurements and the application of the measurement techniques to aircraft with different propulsion systems are discussed. Examples of results obtained for the XB-70 airplane are presented.

  3. Classification of time series patterns from complex dynamic systems

    Energy Technology Data Exchange (ETDEWEB)

    Schryver, J.C.; Rao, N.

    1998-07-01

    An increasing availability of high-performance computing and data storage media at decreasing cost is making possible the proliferation of large-scale numerical databases and data warehouses. Numeric warehousing enterprises on the order of hundreds of gigabytes to terabytes are a reality in many fields such as finance, retail sales, process systems monitoring, biomedical monitoring, surveillance and transportation. Large-scale databases are becoming more accessible to larger user communities through the internet, web-based applications and database connectivity. Consequently, most researchers now have access to a variety of massive datasets. This trend will probably only continue to grow over the next several years. Unfortunately, the availability of integrated tools to explore, analyze and understand the data warehoused in these archives is lagging far behind the ability to gain access to the same data. In particular, locating and identifying patterns of interest in numerical time series data is an increasingly important problem for which there are few available techniques. Temporal pattern recognition poses many interesting problems in classification, segmentation, prediction, diagnosis and anomaly detection. This research focuses on the problem of classification or characterization of numerical time series data. Highway vehicles and their drivers are examples of complex dynamic systems (CDS) which are being used by transportation agencies for field testing to generate large-scale time series datasets. Tools for effective analysis of numerical time series in databases generated by highway vehicle systems are not yet available, or have not been adapted to the target problem domain. However, analysis tools from similar domains may be adapted to the problem of classification of numerical time series data.

  4. A High Resolution/Accurate Mass (HRAM) Data-Dependent MS3 Neutral Loss Screening, Classification, and Relative Quantitation Methodology for Carbonyl Compounds in Saliva

    Science.gov (United States)

    Dator, Romel; Carrà, Andrea; Maertens, Laura; Guidolin, Valeria; Villalta, Peter W.; Balbo, Silvia

    2016-10-01

    Reactive carbonyl compounds (RCCs) are ubiquitous in the environment and are generated endogenously as a result of various physiological and pathological processes. These compounds can react with biological molecules inducing deleterious processes believed to be at the basis of their toxic effects. Several of these compounds are implicated in neurotoxic processes, aging disorders, and cancer. Therefore, a method characterizing exposures to these chemicals will provide insights into how they may influence overall health and contribute to disease pathogenesis. Here, we have developed a high resolution accurate mass (HRAM) screening strategy allowing simultaneous identification and relative quantitation of DNPH-derivatized carbonyls in human biological fluids. The screening strategy involves the diagnostic neutral loss of hydroxyl radical triggering MS3 fragmentation, which is only observed in positive ionization mode of DNPH-derivatized carbonyls. Unique fragmentation pathways were used to develop a classification scheme for characterizing known and unanticipated/unknown carbonyl compounds present in saliva. Furthermore, a relative quantitation strategy was implemented to assess variations in the levels of carbonyl compounds before and after exposure using deuterated d 3 -DNPH. This relative quantitation method was tested on human samples before and after exposure to specific amounts of alcohol. The nano-electrospray ionization (nano-ESI) in positive mode afforded excellent sensitivity with detection limits on-column in the high-attomole levels. To the best of our knowledge, this is the first report of a method using HRAM neutral loss screening of carbonyl compounds. In addition, the method allows simultaneous characterization and relative quantitation of DNPH-derivatized compounds using nano-ESI in positive mode.

  5. A High Resolution/Accurate Mass (HRAM) Data-Dependent MS3 Neutral Loss Screening, Classification, and Relative Quantitation Methodology for Carbonyl Compounds in Saliva

    Science.gov (United States)

    Dator, Romel; Carrà, Andrea; Maertens, Laura; Guidolin, Valeria; Villalta, Peter W.; Balbo, Silvia

    2017-04-01

    Reactive carbonyl compounds (RCCs) are ubiquitous in the environment and are generated endogenously as a result of various physiological and pathological processes. These compounds can react with biological molecules inducing deleterious processes believed to be at the basis of their toxic effects. Several of these compounds are implicated in neurotoxic processes, aging disorders, and cancer. Therefore, a method characterizing exposures to these chemicals will provide insights into how they may influence overall health and contribute to disease pathogenesis. Here, we have developed a high resolution accurate mass (HRAM) screening strategy allowing simultaneous identification and relative quantitation of DNPH-derivatized carbonyls in human biological fluids. The screening strategy involves the diagnostic neutral loss of hydroxyl radical triggering MS3 fragmentation, which is only observed in positive ionization mode of DNPH-derivatized carbonyls. Unique fragmentation pathways were used to develop a classification scheme for characterizing known and unanticipated/unknown carbonyl compounds present in saliva. Furthermore, a relative quantitation strategy was implemented to assess variations in the levels of carbonyl compounds before and after exposure using deuterated d 3 -DNPH. This relative quantitation method was tested on human samples before and after exposure to specific amounts of alcohol. The nano-electrospray ionization (nano-ESI) in positive mode afforded excellent sensitivity with detection limits on-column in the high-attomole levels. To the best of our knowledge, this is the first report of a method using HRAM neutral loss screening of carbonyl compounds. In addition, the method allows simultaneous characterization and relative quantitation of DNPH-derivatized compounds using nano-ESI in positive mode.

  6. Classification of boundary equilibrium bifurcations in planar Filippov systems.

    Science.gov (United States)

    Glendinning, Paul

    2016-01-01

    If a family of piecewise smooth systems depending on a real parameter is defined on two different regions of the plane separated by a switching surface, then a boundary equilibrium bifurcation occurs if a stationary point of one of the systems intersects the switching surface at a critical value of the parameter. We derive the leading order terms of a normal form for boundary equilibrium bifurcations of planar systems. This makes it straightforward to derive a complete classification of the bifurcations that can occur. We are thus able to confirm classic results of Filippov [Differential Equations with Discontinuous Right Hand Sides (Kluwer, Dordrecht, 1988)] using different and more transparent methods, and explain why the 'missing' cases of Hogan et al. [Piecewise Smooth Dynamical Systems: The Case of the Missing Boundary Equilibrium Bifurcations (University of Bristol, 2015)] are the only cases omitted in more recent work.

  7. Accurate Vehicle Location System Using RFID, an Internet of Things Approach.

    Science.gov (United States)

    Prinsloo, Jaco; Malekian, Reza

    2016-06-04

    Modern infrastructure, such as dense urban areas and underground tunnels, can effectively block all GPS signals, which implies that effective position triangulation will not be achieved. The main problem that is addressed in this project is the design and implementation of an accurate vehicle location system using radio-frequency identification (RFID) technology in combination with GPS and the Global system for Mobile communication (GSM) technology, in order to provide a solution to the limitation discussed above. In essence, autonomous vehicle tracking will be facilitated with the use of RFID technology where GPS signals are non-existent. The design of the system and the results are reflected in this paper. An extensive literature study was done on the field known as the Internet of Things, as well as various topics that covered the integration of independent technology in order to address a specific challenge. The proposed system is then designed and implemented. An RFID transponder was successfully designed and a read range of approximately 31 cm was obtained in the low frequency communication range (125 kHz to 134 kHz). The proposed system was designed, implemented, and field tested and it was found that a vehicle could be accurately located and tracked. It is also found that the antenna size of both the RFID reader unit and RFID transponder plays a critical role in the maximum communication range that can be achieved.

  8. Accurate Vehicle Location System Using RFID, an Internet of Things Approach

    Directory of Open Access Journals (Sweden)

    Jaco Prinsloo

    2016-06-01

    Full Text Available Modern infrastructure, such as dense urban areas and underground tunnels, can effectively block all GPS signals, which implies that effective position triangulation will not be achieved. The main problem that is addressed in this project is the design and implementation of an accurate vehicle location system using radio-frequency identification (RFID technology in combination with GPS and the Global system for Mobile communication (GSM technology, in order to provide a solution to the limitation discussed above. In essence, autonomous vehicle tracking will be facilitated with the use of RFID technology where GPS signals are non-existent. The design of the system and the results are reflected in this paper. An extensive literature study was done on the field known as the Internet of Things, as well as various topics that covered the integration of independent technology in order to address a specific challenge. The proposed system is then designed and implemented. An RFID transponder was successfully designed and a read range of approximately 31 cm was obtained in the low frequency communication range (125 kHz to 134 kHz. The proposed system was designed, implemented, and field tested and it was found that a vehicle could be accurately located and tracked. It is also found that the antenna size of both the RFID reader unit and RFID transponder plays a critical role in the maximum communication range that can be achieved.

  9. Fault Tolerant Neural Network for ECG Signal Classification Systems

    Directory of Open Access Journals (Sweden)

    MERAH, M.

    2011-08-01

    Full Text Available The aim of this paper is to apply a new robust hardware Artificial Neural Network (ANN for ECG classification systems. This ANN includes a penalization criterion which makes the performances in terms of robustness. Specifically, in this method, the ANN weights are normalized using the auto-prune method. Simulations performed on the MIT ? BIH ECG signals, have shown that significant robustness improvements are obtained regarding potential hardware artificial neuron failures. Moreover, we show that the proposed design achieves better generalization performances, compared to the standard back-propagation algorithm.

  10. A complete electrical hazard classification system and its application

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, Lloyd B [Los Alamos National Laboratory; Cartelli, Laura [Los Alamos National Laboratory

    2009-01-01

    The Standard for Electrical Safety in the Workplace, NFPA 70E, and relevant OSHA electrical safety standards evolved to address the hazards of 60-Hz power that are faced primarily by electricians, linemen, and others performing facility and utility work. This leaves a substantial gap in the management of electrical hazards in Research and Development (R&D) and specialized high voltage and high power equipment. Examples include lasers, accelerators, capacitor banks, electroplating systems, induction and dielectric heating systems, etc. Although all such systems are fed by 50/60 Hz alternating current (ac) power, we find substantial use of direct current (dc) electrical energy, and the use of capacitors, inductors, batteries, and radiofrequency (RF) power. The electrical hazards of these forms of electricity and their systems are different than for 50160 Hz power. Over the past 10 years there has been an effort to develop a method of classifying all of the electrical hazards found in all types of R&D and utilization equipment. Examples of the variation of these hazards from NFPA 70E include (a) high voltage can be harmless, if the available current is sufficiently low, (b) low voltage can be harmful if the available current/power is high, (c) high voltage capacitor hazards are unique and include severe reflex action, affects on the heart, and tissue damage, and (d) arc flash hazard analysis for dc and capacitor systems are not provided in existing standards. This work has led to a comprehensive electrical hazard classification system that is based on various research conducted over the past 100 years, on analysis of such systems in R&D, and on decades of experience. Initially, national electrical safety codes required the qualified worker only to know the source voltage to determine the shock hazard. Later, as arc flash hazards were understood, the fault current and clearing time were needed. These items are still insufficient to fully characterize all types of

  11. A simplified but accurate prevision method for along the sun PV pumping systems

    Energy Technology Data Exchange (ETDEWEB)

    Martire, Thierry [Laboratoire d' Electrotechnique de Montpellier (LEM), Universite de Montpellier II, CC079, Place Eugene Bataillon, F 34095 Montpellier Cedex 5 (France); Apex BP-SOLAR - 1, Rue du Grand Chene, F 34270 Saint Mathieu de Treviers (France); Glaize, Christian; Joubert, Charles [Laboratoire d' Electrotechnique de Montpellier (LEM), Universite de Montpellier II, CC079, Place Eugene Bataillon, F 34095 Montpellier Cedex 5 (France); Rouviere, Benoit [Apex BP-SOLAR - 1, Rue du Grand Chene, F 34270 Saint Mathieu de Treviers (France)

    2008-11-15

    Supplying water in desert areas or isolated sites is the perfect job for along sun pumping systems. However, due to their relatively high cost, the sizing of these systems implies the use of an accurate tool. This paper presents a method that could be used for the sizing of an along the sun pumping system based on energetic considerations, simple modeling and fitting methods. The model described allows to predict the flow rate hour per hour for a given daily solar irradiance profile. It uses a three-phase induction machine, a voltage inverter and a centrifugal pump. Some experimental results are also confronted with the calculated ones in order to show the accuracy of the model. The accuracy of the model is shown to be good and essentially depends on the precision used to model each element in the overall system. (author)

  12. An updated histological classification system for multiple sclerosis lesions.

    Science.gov (United States)

    Kuhlmann, Tanja; Ludwin, Samuel; Prat, Alexandre; Antel, Jack; Brück, Wolfgang; Lassmann, Hans

    2017-01-01

    Multiple sclerosis is a complex and heterogeneous, most likely autoimmune, demyelinating disease of the central nervous system (CNS). Although a number of histological classification systems for CNS lesions have been used by different groups in recent years, no uniform classification exists. In this paper, we propose a simple and unifying classification of MS lesions incorporating many elements of earlier histological systems that aims to provide guidelines for neuropathologists and researchers studying MS lesions to allow for better comparison of different studies performed with MS tissue, and to aid in understanding the pathogenesis of the disease. Based on the presence/absence and distribution of macrophages/microglia (inflammatory activity) and the presence/absence of ongoing demyelination (demyelinating activity), we suggest differentiating between active, mixed active/inactive, and inactive lesions with or without ongoing demyelination. Active lesions are characterized by macrophages/microglia throughout the lesion area, whereas mixed active/inactive lesions have a hypocellular lesion center with macrophages/microglia limited to the lesion border. Inactive lesions are almost completely lacking macrophages/microglia. Active and mixed active/inactive lesions can be further subdivided into lesions with ongoing myelin destruction (demyelinating lesions) and lesions in which the destruction of myelin has ceased, but macrophages are still present (post-demyelinating lesions). This distinction is based on the presence or absence of myelin degradation products within the cytoplasm of macrophages/microglia. For this classification of MS lesions, identification of myelin with histological stains [such as luxol fast blue-PAS] or by immunohistochemistry using antibodies against myelin basic-protein (MBP) or proteolipid-protein (PLP), as well as, detection of macrophages/microglia by, e.g., anti-CD68 is sufficient. Active and demyelinating lesions may be further

  13. Prometheus: Scalable and Accurate Emulation of Task-Based Applications on Many-Core Systems.

    Energy Technology Data Exchange (ETDEWEB)

    Kestor, Gokcen; Gioiosa, Roberto; Chavarría-Miranda, Daniel

    2015-03-01

    Modeling the performance of non-deterministic parallel applications on future many-core systems requires the development of novel simulation and emulation techniques and tools. We present “Prometheus”, a fast, accurate and modular emulation framework for task-based applications. By raising the level of abstraction and focusing on runtime synchronization, Prometheus can accurately predict applications’ performance on very large many-core systems. We validate our emulation framework against two real platforms (AMD Interlagos and Intel MIC) and report error rates generally below 4%. We, then, evaluate Prometheus’ performance and scalability: our results show that Prometheus can emulate a task-based application on a system with 512K cores in 11.5 hours. We present two test cases that show how Prometheus can be used to study the performance and behavior of systems that present some of the characteristics expected from exascale supercomputer nodes, such as active power management and processors with a high number of cores but reduced cache per core.

  14. An Accurate Heading Solution using MEMS-based Gyroscope and Magnetometer Integrated System (Preliminary Results)

    Science.gov (United States)

    El-Diasty, M.

    2014-11-01

    An accurate heading solution is required for many applications and it can be achieved by high grade (high cost) gyroscopes (gyros) which may not be suitable for such applications. Micro-Electro Mechanical Systems-based (MEMS) is an emerging technology, which has the potential of providing heading solution using a low cost MEMS-based gyro. However, MEMS-gyro-based heading solution drifts significantly over time. The heading solution can also be estimated using MEMS-based magnetometer by measuring the horizontal components of the Earth magnetic field. The MEMS-magnetometer-based heading solution does not drift over time, but are contaminated by high level of noise and may be disturbed by the presence of magnetic field sources such as metal objects. This paper proposed an accurate heading estimation procedure based on the integration of MEMS-based gyro and magnetometer measurements that correct gyro and magnetometer measurements where gyro angular rates of changes are estimated using magnetometer measurements and then integrated with the measured gyro angular rates of changes with a robust filter to estimate the heading. The proposed integration solution is implemented using two data sets; one was conducted in static mode without magnetic disturbances and the second was conducted in kinematic mode with magnetic disturbances. The results showed that the proposed integrated heading solution provides accurate, smoothed and undisturbed solution when compared with magnetometerbased and gyro-based heading solutions.

  15. Accurately Estimating the State of a Geophysical System with Sparse Observations: Predicting the Weather

    CERN Document Server

    An, Zhe; Abarbanel, Henry D I

    2014-01-01

    Utilizing the information in observations of a complex system to make accurate predictions through a quantitative model when observations are completed at time $T$, requires an accurate estimate of the full state of the model at time $T$. When the number of measurements $L$ at each observation time within the observation window is larger than a sufficient minimum value $L_s$, the impediments in the estimation procedure are removed. As the number of available observations is typically such that $L \\ll L_s$, additional information from the observations must be presented to the model. We show how, using the time delays of the measurements at each observation time, one can augment the information transferred from the data to the model, removing the impediments to accurate estimation and permitting dependable prediction. We do this in a core geophysical fluid dynamics model, the shallow water equations, at the heart of numerical weather prediction. The method is quite general, however, and can be utilized in the a...

  16. Time Accurate Unsteady Pressure Loads Simulated for the Space Launch System at a Wind Tunnel Condition

    Science.gov (United States)

    Alter, Stephen J.; Brauckmann, Gregory J.; Kleb, Bil; Streett, Craig L; Glass, Christopher E.; Schuster, David M.

    2015-01-01

    Using the Fully Unstructured Three-Dimensional (FUN3D) computational fluid dynamics code, an unsteady, time-accurate flow field about a Space Launch System configuration was simulated at a transonic wind tunnel condition (Mach = 0.9). Delayed detached eddy simulation combined with Reynolds Averaged Naiver-Stokes and a Spallart-Almaras turbulence model were employed for the simulation. Second order accurate time evolution scheme was used to simulate the flow field, with a minimum of 0.2 seconds of simulated time to as much as 1.4 seconds. Data was collected at 480 pressure taps at locations, 139 of which matched a 3% wind tunnel model, tested in the Transonic Dynamic Tunnel (TDT) facility at NASA Langley Research Center. Comparisons between computation and experiment showed agreement within 5% in terms of location for peak RMS levels, and 20% for frequency and magnitude of power spectral densities. Grid resolution and time step sensitivity studies were performed to identify methods for improved accuracy comparisons to wind tunnel data. With limited computational resources, accurate trends for reduced vibratory loads on the vehicle were observed. Exploratory methods such as determining minimized computed errors based on CFL number and sub-iterations, as well as evaluating frequency content of the unsteady pressures and evaluation of oscillatory shock structures were used in this study to enhance computational efficiency and solution accuracy. These techniques enabled development of a set of best practices, for the evaluation of future flight vehicle designs in terms of vibratory loads.

  17. Derivation and Validation of Systemic Lupus International Collaborating Clinics Classification Criteria for Systemic Lupus Erythematosus

    Science.gov (United States)

    Petri, Michelle; Orbai, Ana-Maria; Alarcón, Graciela S.; Gordon, Caroline; Merrill, Joan T.; Fortin, Paul R.; Bruce, Ian N.; Isenberg, David; Wallace, Daniel J.; Nived, Ola; Sturfelt, Gunnar; Ramsey-Goldman, Rosalind; Bae, Sang-Cheol; Hanly, John G.; Sanchez-Guerrero, Jorge; Clarke, Ann; Aranow, Cynthia; Manzi, Susan; Urowitz, Murray; Gladman, Dafna; Kalunian, Kenneth; Costner, Melissa; Werth, Victoria P.; Zoma, Asad; Bernatsky, Sasha; Ruiz-Irastorza, Guillermo; Khamashta, Munther A.; Jacobsen, Soren; Buyon, Jill P.; Maddison, Peter; Dooley, Mary Anne; van Vollenhoven, Ronald F.; Ginzler, Ellen; Stoll, Thomas; Peschken, Christine; Jorizzo, Joseph L.; Callen, Jeffrey P.; Lim, S. Sam; Fessler, Barri J.; Inanc, Murat; Kamen, Diane L.; Rahman, Anisur; Steinsson, Kristjan; Franks, Andrew G.; Sigler, Lisa; Hameed, Suhail; Fang, Hong; Pham, Ngoc; Brey, Robin; Weisman, Michael H.; McGwin, Gerald; Magder, Laurence S.

    2012-01-01

    Objective The Systemic Lupus Collaborating Clinics (SLICC) revised and validated the American College of Rheumatology (ACR) SLE classification criteria in order to improve clinical relevance, meet stringent methodology requirements and incorporate new knowledge in SLE immunology. Methods The classification criteria were derived from a set of 702 expert-rated patient scenarios. Recursive partitioning was used to derive an initial rule that was simplified and refined based on SLICC physician consensus. SLICC validated the classification criteria in a new validation sample of 690 SLE patients and controls. Results Seventeen criteria were identified. The SLICC criteria for SLE classification requires: 1) Fulfillment of at least four criteria, with at least one clinical criterion AND one immunologic criterion OR 2) Lupus nephritis as the sole clinical criterion in the presence of ANA or anti-dsDNA antibodies. In the derivation set, the SLICC classification criteria resulted in fewer misclassifications than the current ACR classification criteria (49 versus 70, p=0.0082), had greater sensitivity (94% versus 86%, p<0.0001) and equal specificity (92% versus 93%, p=0.39). In the validation set, the SLICC Classification criteria resulted in fewer misclassifications (62 versus 74, p=0.24), had greater sensitivity (97% versus 83%, p<0.0001) but less specificity (84% versus 96%, p<0.0001). Conclusions The new SLICC classification criteria performed well on a large set of patient scenarios rated by experts. They require that at least one clinical criterion and one immunologic criterion be present for a classification of SLE. Biopsy confirmed nephritis compatible with lupus (in the presence of SLE autoantibodies) is sufficient for classification. PMID:22553077

  18. Gender and cultural issues in psychiatric nosological classification systems.

    Science.gov (United States)

    van de Water, Tanya; Suliman, Sharain; Seedat, Soraya

    2016-08-01

    Much has changed since the two dominant mental health nosological systems, the International Classification of Diseases (ICD) and the Diagnostic and Statistical Manual of Mental Disorders (DSM), were first published in 1900 and 1952, respectively. Despite numerous modifications to stay up to date with scientific and cultural changes (eg, exclusion of homosexuality as a disorder) and to improve the cultural sensitivity of psychiatric diagnoses, the ICD and DSM have only recently renewed attempts at harmonization. Previous nosological iterations demonstrate the oscillation in the importance placed on the biological focus, highlighting the tension between a gender- and culture-free nosology (solely biological) and a contextually relevant understanding of mental illness. In light of the release of the DSM 5, future nosological systems, such as the ICD 11, scheduled for release in 2017, and the Research Development Criteria (RDoC), can learn from history and apply critiques. This article aims to critically consider gender and culture in previous editions of the ICD and DSM to inform forthcoming classifications.

  19. Understanding Acupuncture Based on ZHENG Classification from System Perspective

    Directory of Open Access Journals (Sweden)

    Junwei Fang

    2013-01-01

    Full Text Available Acupuncture is an efficient therapy method originated in ancient China, the study of which based on ZHENG classification is a systematic research on understanding its complexity. The system perspective is contributed to understand the essence of phenomena, and, as the coming of the system biology era, broader technology platforms such as omics technologies were established for the objective study of traditional chinese medicine (TCM. Omics technologies could dynamically determine molecular components of various levels, which could achieve a systematic understanding of acupuncture by finding out the relationships of various response parts. After reviewing the literature of acupuncture studied by omics approaches, the following points were found. Firstly, with the help of omics approaches, acupuncture was found to be able to treat diseases by regulating the neuroendocrine immune (NEI network and the change of which could reflect the global effect of acupuncture. Secondly, the global effect of acupuncture could reflect ZHENG information at certain structure and function levels, which might reveal the mechanism of Meridian and Acupoint Specificity. Furthermore, based on comprehensive ZHENG classification, omics researches could help us understand the action characteristics of acupoints and the molecular mechanisms of their synergistic effect.

  20. Tangata whaiora/consumers perspectives on current psychiatric classification systems

    Directory of Open Access Journals (Sweden)

    Wells Debra

    2008-06-01

    Full Text Available Abstract Background A number of studies have been undertaken with the aim of considering the utility of mental health classification systems from the perspective of a variety of stakeholders. There is a lack of research on how useful consumers/tangata whaiora think these are in assisting them in their recovery. Methods Seventy service users were involved in seven focus groups in order to consider this question. Results and discussion While for clinicians diagnosing someone might be a discrete event and easily forgotten as a moment in a busy schedule, most people in this study remembered the occasion and aftermath very clearly. The overall consensus was that whether being 'diagnosed' was helpful or not, in large part, depended on how the process happened and what resulted from being 'labeled' in the person's life. Conclusion Overall, people thought that in terms of their recovery, the classification systems were tools and their utility depended on how they were used. They suggested that whatever tool was used it needed to help them make sense of their distress and provide them with a variety of supports, not just medication, to assist them to live lives that were meaningful to them.

  1. A data-stream classification system for investigating terrorist threats

    Science.gov (United States)

    Schulz, Alexia; Dettman, Joshua; Gottschalk, Jeffrey; Kotson, Michael; Vuksani, Era; Yu, Tamara

    2016-05-01

    The role of cyber forensics in criminal investigations has greatly increased in recent years due to the wealth of data that is collected and available to investigators. Physical forensics has also experienced a data volume and fidelity revolution due to advances in methods for DNA and trace evidence analysis. Key to extracting insight is the ability to correlate across multi-modal data, which depends critically on identifying a touch-point connecting the separate data streams. Separate data sources may be connected because they refer to the same individual, entity or event. In this paper we present a data source classification system tailored to facilitate the investigation of potential terrorist activity. This taxonomy is structured to illuminate the defining characteristics of a particular terrorist effort and designed to guide reporting to decision makers that is complete, concise, and evidence-based. The classification system has been validated and empirically utilized in the forensic analysis of a simulated terrorist activity. Next-generation analysts can use this schema to label and correlate across existing data streams, assess which critical information may be missing from the data, and identify options for collecting additional data streams to fill information gaps.

  2. CLASSIFICATION OF MAMMOGRAPHIC MASSES USING FUZZY INFERENCE SYSTEM

    Directory of Open Access Journals (Sweden)

    K. Divyadarshini

    2015-10-01

    Full Text Available Computer aided detection (CAD intends to provide assistance to the mammography detection, reducing breast cancer misdiagnosis, thus allowing better diagnosis and more efficient treatments. In this work the task of automatically classifying the mass tissue into Breast Imaging Reporting and Data System (BI-RADS shape categories: round, oval, lobular, irregular and also as benign or malignant is investigated. Geometrical shape and margin features based on maximum and minimum radius of mass are used in this work to classify the masses. These geometric features are found to be good in discriminating regular shapes from irregular shapes. For the purpose of classification, the masses are segmented from the mammogram using gray level thresholding. Finally, the classification is performed using fuzzy inference system. The fuzzy rules are used to construct the generalized fuzzy membership function for classifying the shape and severity of masses. The images were collected from Mammographic Image Analysis Society (MIAS Database and Digital Database for Screening Mammography (DDSM. The experiments were implemented in MATLAB.

  3. Designer cantilevers for even more accurate quantitative measurements of biological systems with multifrequency AFM

    Science.gov (United States)

    Contera, S.

    2016-04-01

    Multifrequency excitation/monitoring of cantilevers has made it possible both to achieve fast, relatively simple, nanometre-resolution quantitative mapping of mechanical of biological systems in solution using atomic force microscopy (AFM), and single molecule resolution detection by nanomechanical biosensors. A recent paper by Penedo et al [2015 Nanotechnology 26 485706] has made a significant contribution by developing simple methods to improve the signal to noise ratio in liquid environments, by selectively enhancing cantilever modes, which will lead to even more accurate quantitative measurements.

  4. A Flexible Fringe Projection Vision System with Extended Mathematical Model for Accurate Three-Dimensional Measurement

    Directory of Open Access Journals (Sweden)

    Suzhi Xiao

    2016-04-01

    Full Text Available In order to acquire an accurate three-dimensional (3D measurement, the traditional fringe projection technique applies complex and laborious procedures to compensate for the errors that exist in the vision system. However, the error sources in the vision system are very complex, such as lens distortion, lens defocus, and fringe pattern nonsinusoidality. Some errors cannot even be explained or rendered with clear expressions and are difficult to compensate directly as a result. In this paper, an approach is proposed that avoids the complex and laborious compensation procedure for error sources but still promises accurate 3D measurement. It is realized by the mathematical model extension technique. The parameters of the extended mathematical model for the ’phase to 3D coordinates transformation’ are derived using the least-squares parameter estimation algorithm. In addition, a phase-coding method based on a frequency analysis is proposed for the absolute phase map retrieval to spatially isolated objects. The results demonstrate the validity and the accuracy of the proposed flexible fringe projection vision system on spatially continuous and discontinuous objects for 3D measurement.

  5. Operating Rule Classification System of Water Supply Reservoir Based on Learning Classifier System

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xian-feng; WANG Xiao-lin; YIN Zheng-jie; LI Hui-qiang

    2008-01-01

    An operating rule classification system based on lesrning classifier system (LCS), which learns through credit assignment (bucket brigade algorithm, BBA) and rule discovery (genetic algorithm, GA), is established to extract water-supply reservoir operating rules. The proposed system acquires an online identification rate of 95% for training samples and an offline rate of 85% for testing samples in a case study. The performances of the rule classification system are discussed from the rationality of the obtained rules, the impact of training samples on rule extraction, and a comparison between the rule classification system and the artificial neural network (ANN). The results indicate that the LCS is feasible and effective for the system to obtain the reservoir supply operating rules.

  6. A Multilayer Recurrent Fuzzy Neural Network for Accurate Dynamic System Modeling

    Institute of Scientific and Technical Information of China (English)

    LIU He; HUANG Dao

    2008-01-01

    A muitilayer recurrent fuzzy neural network (MRFNN)is proposed for accurate dynamic system modeling.The proposed MRFNN has six layers combined with T-S fuzzy model.The recurrent structures are formed by local feedback connections in the membership layer and the rule layer.With these feedbacks,the fuzzy sets are time-varying and the temporal problem of dynamic system can he solved well.The parameters of MRFNN are learned by chaotic search(CS)and least square estimation(LSE)simultaneously,where CS is for tuning the premise parameters and LSE is for updating the consequent coefficients accordingly.Results of simulations show the proposed approach is effective for dynamic system modeling with high accuracy.

  7. Toward a classification of semidegenerate 3D superintegrable systems

    Science.gov (United States)

    Escobar-Ruiz, M. A.; Miller, Willard, Jr.

    2017-03-01

    Superintegrable systems of 2nd order in 3 dimensions with exactly 3-parameter potentials are intriguing objects. Next to the nondegenerate 4-parameter potential systems they admit the maximum number of symmetry operators, but their symmetry algebras do not close under commutation and not enough is known about their structure to give a complete classification. Some examples are known for which the 3-parameter system can be extended to a 4th order superintegrable system with a 4-parameter potential and 6 linearly independent symmetry generators. In this paper we use Bôcher contractions of the conformal Lie algebra so≤ft(5,{C}\\right) to itself to generate a large family of 3-parameter systems with 4th order extensions, on a variety of manifolds, all from Bôcher contractions of a single ‘generic’ system on the 3-sphere. We give a contraction scheme relating these systems. The results have myriad applications for finding explicit solutions for both quantum and classical systems.

  8. A vision-based system for fast and accurate laser scanning in robot-assisted phonomicrosurgery.

    Science.gov (United States)

    Dagnino, Giulio; Mattos, Leonardo S; Caldwell, Darwin G

    2015-02-01

    Surgical quality in phonomicrosurgery can be improved by open-loop laser control (e.g., high-speed scanning capabilities) with a robust and accurate closed-loop visual servoing systems. A new vision-based system for laser scanning control during robot-assisted phonomicrosurgery was developed and tested. Laser scanning was accomplished with a dual control strategy, which adds a vision-based trajectory correction phase to a fast open-loop laser controller. The system is designed to eliminate open-loop aiming errors caused by system calibration limitations and by the unpredictable topology of real targets. Evaluation of the new system was performed using CO(2) laser cutting trials on artificial targets and ex-vivo tissue. This system produced accuracy values corresponding to pixel resolution even when smoke created by the laser-target interaction clutters the camera view. In realistic test scenarios, trajectory following RMS errors were reduced by almost 80 % with respect to open-loop system performances, reaching mean error values around 30 μ m and maximum observed errors in the order of 60 μ m. A new vision-based laser microsurgical control system was shown to be effective and promising with significant positive potential impact on the safety and quality of laser microsurgeries.

  9. Hybrid Ant Bee Algorithm for Fuzzy Expert System Based Sample Classification.

    Science.gov (United States)

    GaneshKumar, Pugalendhi; Rani, Chellasamy; Devaraj, Durairaj; Victoire, T Aruldoss Albert

    2014-01-01

    Accuracy maximization and complexity minimization are the two main goals of a fuzzy expert system based microarray data classification. Our previous Genetic Swarm Algorithm (GSA) approach has improved the classification accuracy of the fuzzy expert system at the cost of their interpretability. The if-then rules produced by the GSA are lengthy and complex which is difficult for the physician to understand. To address this interpretability-accuracy tradeoff, the rule set is represented using integer numbers and the task of rule generation is treated as a combinatorial optimization task. Ant colony optimization (ACO) with local and global pheromone updations are applied to find out the fuzzy partition based on the gene expression values for generating simpler rule set. In order to address the formless and continuous expression values of a gene, this paper employs artificial bee colony (ABC) algorithm to evolve the points of membership function. Mutual Information is used for idenfication of informative genes. The performance of the proposed hybrid Ant Bee Algorithm (ABA) is evaluated using six gene expression data sets. From the simulation study, it is found that the proposed approach generated an accurate fuzzy system with highly interpretable and compact rules for all the data sets when compared with other approaches.

  10. Classification system for the Sudden Unexpected Infant Death Case Registry and its application.

    Science.gov (United States)

    Shapiro-Mendoza, Carrie K; Camperlengo, Lena; Ludvigsen, Rebecca; Cottengim, Carri; Anderson, Robert N; Andrew, Thomas; Covington, Theresa; Hauck, Fern R; Kemp, James; MacDorman, Marian

    2014-07-01

    Sudden unexpected infant deaths (SUID) accounted for 1 in 3 postneonatal deaths in 2010. Sudden infant death syndrome and accidental sleep-related suffocation are among the most frequently reported types of SUID. The causes of these SUID usually are not obvious before a medico-legal investigation and may remain unexplained even after investigation. Lack of consistent investigation practices and an autopsy marker make it difficult to distinguish sudden infant death syndrome from other SUID. Standardized categories might assist in differentiating SUID subtypes and allow for more accurate monitoring of the magnitude of SUID, as well as an enhanced ability to characterize the highest risk groups. To capture information about the extent to which cases are thoroughly investigated and how factors like unsafe sleep may contribute to deaths, CDC created a multistate SUID Case Registry in 2009. As part of the registry, the Centers for Disease Control and Prevention developed a classification system that recognizes the uncertainty about how suffocation or asphyxiation may contribute to death and that accounts for unknown and incomplete information about the death scene and autopsy. This report describes the classification system, including its definitions and decision-making algorithm, and applies the system to 436 US SUID cases that occurred in 2011 and were reported to the registry. These categories, although not replacing official cause-of-death determinations, allow local and state programs to track SUID subtypes, creating a valuable tool to identify gaps in investigation and inform SUID reduction strategies.

  11. Classification of attractors for systems of identical coupled Kuramoto oscillators

    Energy Technology Data Exchange (ETDEWEB)

    Engelbrecht, Jan R. [Department of Physics, Boston College, Chestnut Hill, Massachusetts 02467 (United States); Mirollo, Renato [Department of Mathematics, Boston College, Chestnut Hill, Massachusetts 02467 (United States)

    2014-03-15

    We present a complete classification of attractors for networks of coupled identical Kuramoto oscillators. In such networks, each oscillator is driven by the same first-order trigonometric function, with coefficients given by symmetric functions of the entire oscillator ensemble. For N≠3 oscillators, there are four possible types of attractors: completely synchronized fixed points or limit cycles, and fixed points or limit cycles where all but one of the oscillators are synchronized. The case N = 3 is exceptional; systems of three identical Kuramoto oscillators can also posses attracting fixed points or limit cycles with all three oscillators out of sync, as well as chaotic attractors. Our results rely heavily on the invariance of the flow for such systems under the action of the three-dimensional group of Möbius transformations, which preserve the unit disc, and the analysis of the possible limiting configurations for this group action.

  12. Classification of attractors for systems of identical coupled Kuramoto oscillators.

    Science.gov (United States)

    Engelbrecht, Jan R; Mirollo, Renato

    2014-03-01

    We present a complete classification of attractors for networks of coupled identical Kuramoto oscillators. In such networks, each oscillator is driven by the same first-order trigonometric function, with coefficients given by symmetric functions of the entire oscillator ensemble. For [Formula: see text] oscillators, there are four possible types of attractors: completely synchronized fixed points or limit cycles, and fixed points or limit cycles where all but one of the oscillators are synchronized. The case N = 3 is exceptional; systems of three identical Kuramoto oscillators can also posses attracting fixed points or limit cycles with all three oscillators out of sync, as well as chaotic attractors. Our results rely heavily on the invariance of the flow for such systems under the action of the three-dimensional group of Möbius transformations, which preserve the unit disc, and the analysis of the possible limiting configurations for this group action.

  13. Patterns of grease burn injury: development of a classification system.

    Science.gov (United States)

    Klein, Matthew B; Gibran, Nicole S; Emerson, Dominic; Sullivan, Stephen R; Honari, Shari; Engrav, Loren H; Heimbach, David M

    2005-09-01

    Grease burns occur commonly in the home during food preparation. It has been our observation that grease burns follow a particular pattern of injury. The purpose of this study was to review our institutional experience in the management of these burns to develop a classification scheme. We performed a retrospective review of patients admitted to our burn center with grease burns. Subjects were identified through our database and their charts were reviewed with particular attention to burn distribution, TBSA and need for grafting. We excluded workplace burns and children under the age of six. A total of 249 patients who fit the above criteria were admitted with grease burns to our burn center from 1993 to 2003. The sequence of events leading to burn and its distribution followed a consistent pattern. The majority of patients (86%) had an isolated upper extremity burn or upper extremity burn in combination with a face, trunk or lower extremity burn. Forty percent of patients required at least one excision and grafting procedure. Grease burns associated with cooking at home follow predictable patterns of injury. Based on these patterns we proposed a classification system for domestic grease burns.

  14. Multiple classifier system for remote sensing image classification: a review.

    Science.gov (United States)

    Du, Peijun; Xia, Junshi; Zhang, Wei; Tan, Kun; Liu, Yi; Liu, Sicong

    2012-01-01

    Over the last two decades, multiple classifier system (MCS) or classifier ensemble has shown great potential to improve the accuracy and reliability of remote sensing image classification. Although there are lots of literatures covering the MCS approaches, there is a lack of a comprehensive literature review which presents an overall architecture of the basic principles and trends behind the design of remote sensing classifier ensemble. Therefore, in order to give a reference point for MCS approaches, this paper attempts to explicitly review the remote sensing implementations of MCS and proposes some modified approaches. The effectiveness of existing and improved algorithms are analyzed and evaluated by multi-source remotely sensed images, including high spatial resolution image (QuickBird), hyperspectral image (OMISII) and multi-spectral image (Landsat ETM+). Experimental results demonstrate that MCS can effectively improve the accuracy and stability of remote sensing image classification, and diversity measures play an active role for the combination of multiple classifiers. Furthermore, this survey provides a roadmap to guide future research, algorithm enhancement and facilitate knowledge accumulation of MCS in remote sensing community.

  15. Multiple Classifier System for Remote Sensing Image Classification: A Review

    Directory of Open Access Journals (Sweden)

    Yi Liu

    2012-04-01

    Full Text Available Over the last two decades, multiple classifier system (MCS or classifier ensemble has shown great potential to improve the accuracy and reliability of remote sensing image classification. Although there are lots of literatures covering the MCS approaches, there is a lack of a comprehensive literature review which presents an overall architecture of the basic principles and trends behind the design of remote sensing classifier ensemble. Therefore, in order to give a reference point for MCS approaches, this paper attempts to explicitly review the remote sensing implementations of MCS and proposes some modified approaches. The effectiveness of existing and improved algorithms are analyzed and evaluated by multi-source remotely sensed images, including high spatial resolution image (QuickBird, hyperspectral image (OMISII and multi-spectral image (Landsat ETM+.Experimental results demonstrate that MCS can effectively improve the accuracy and stability of remote sensing image classification, and diversity measures play an active role for the combination of multiple classifiers. Furthermore, this survey provides a roadmap to guide future research, algorithm enhancement and facilitate knowledge accumulation of MCS in remote sensing community.

  16. Development Of An Econometric Model Case Study: Romanian Classification System

    Directory of Open Access Journals (Sweden)

    Savescu Roxana

    2015-08-01

    Full Text Available The purpose of the paper is to illustrate an econometric model used to predict the lean meat content in pig carcasses, based on the muscle thickness and back fat thickness measured by the means of an optical probe (OptiGrade PRO.The analysis goes through all steps involved in the development of the model: statement of theory, specification of the mathematical model, sampling and collection of data, estimation of the parameters of the chosen econometric model, tests of the hypothesis derived from the model and prediction equations. The data have been in a controlled experiment conducted by the Romanian Carcass Classification Commission in 2007. The purpose of the experiment was to develop the prediction formulae to be used in the implementation of SEUROP classification system, imposed by European Union legislation. The research methodology used by the author in this study consisted in reviewing the existing literature and normative acts, analyzing the primary data provided by and organization conducting the experiment and interviewing the representatives of the working team that participated in the trial.

  17. Aneurysms of the superficial venous system: classification and treatment

    Directory of Open Access Journals (Sweden)

    Ronald G. Bush

    2014-11-01

    Full Text Available Superficial venous aneurysms are rarely described and they may remain indolent or become the source for pulmonary emboli. A system of classification and treatment protocol according to size and location is proposed. Three hundred thirty patients were evaluated for symptomatic venous disease (C2-C6 over a 2-year period. A proposed designation for venous aneurysm is described. Patients fulfilling this criterion are described in reference to site of involvement, histologic findings, and method of treatment. Five percent of patients met the criteria for venous aneurysm. Nine aneurysms of the greater saphenous vein were identified. Three aneurysms were proximal to the subterminal valve and the rest were distal. Six aneurysms of the anterior accessory greater saphenous vein (AAGSV were identified. Three aneurysms of the AAGSV spontaneously thrombosed. Two patients presented with aneurysms of the small saphenous vein. Histology revealed thickened intima, smooth muscle and adventitia. Aneurysm designation relates to diameter of normal and contiguous vein. All superficial venous aneurysms in close proximity to the junction of the femoral or popliteal vein should be ligated. Classification of venous aneurysms should include the AAGSV, which may present with spontaneous thrombosis.

  18. Fast and accurate generation method of PSF-based system matrix for PET reconstruction

    CERN Document Server

    Sun, Xiao-Li; Yun, Ming-Kai; Li, Dao-Wu; Gao, Juan; Li, Mo-Han; Chai, Pei; Tang, Hao-Hui; Zhang, Zhi-Ming; Wei, Long

    2016-01-01

    Positional single photon incidence response (P-SPIR) theory is researched in this paper to generate more accurate PSF-contained system matrix simply and quickly. The method has been proved highly effective to improve the spatial resolution by applying to the Eplus-260 primate PET designed by the Institute of High Energy Physics of the Chinese Academy of Sciences(IHEP). Simultaneously, to meet the clinical needs, GPU acceleration is put to use. Basically, P-SPIR theory takes both incidence angle and incidence position by crystal subdivision instead of only incidence angle into consideration based on Geant4 Application for Emission Tomography (GATE). The simulation conforms to the actual response distribution and can be completed rapidly within less than 1s. Furthermore,two-block penetration and normalization of the response probability are raised to fit the reality. With PSF obtained, the homogenization model is analyzed to calculate the spread distribution of bins within a few minutes for system matrix genera...

  19. A Low-Cost, Accurate, and High-Precision Fluid Dispensing System for Microscale Application.

    Science.gov (United States)

    Das, Champak; Wang, Guochun; Nguyen, Chien

    2017-04-01

    We present here the development of a low-cost, accurate, and precise fluid dispensing system. It can be used with peristaltic or any other pump to improve the flow characteristics. The dispensing system has a range of 1 to 100 µL with accuracy of ~99.5% and standard deviation at ~150 nL over the entire range. The system developed does not depend on the accuracy or precision of the driving pump; therefore, any positive displacement pump can be used to get similar accuracy and precision, which gives an opportunity to reduce the cost of the system. The dispensing system does not require periodic calibration and can also be miniaturized for microfluidic application. Although primarily designed for aqueous liquid, it can be extended for different nonconductive liquids as well with modifications. The unit is further used for near real-time measurement of lactate from microdialysate. The individual components can easily be made disposable or sterilized for use in biomedical applications.

  20. Accurate first-principles structures and energies of diversely bonded systems from an efficient density functional

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Jianwei; Remsing, Richard C.; Zhang, Yubo; Sun, Zhaoru; Ruzsinszky, Adrienn; Peng, Haowei; Yang, Zenghui; Paul, Arpita; Waghmare, Umesh; Wu, Xifan; Klein, Michael L.; Perdew, John P.

    2016-06-13

    One atom or molecule binds to another through various types of bond, the strengths of which range from several meV to several eV. Although some computational methods can provide accurate descriptions of all bond types, those methods are not efficient enough for many studies (for example, large systems, ab initio molecular dynamics and high-throughput searches for functional materials). Here, we show that the recently developed non-empirical strongly constrained and appropriately normed (SCAN) meta-generalized gradient approximation (meta-GGA) within the density functional theory framework predicts accurate geometries and energies of diversely bonded molecules and materials (including covalent, metallic, ionic, hydrogen and van der Waals bonds). This represents a significant improvement at comparable efficiency over its predecessors, the GGAs that currently dominate materials computation. Often, SCAN matches or improves on the accuracy of a computationally expensive hybrid functional, at almost-GGA cost. SCAN is therefore expected to have a broad impact on chemistry and materials science.

  1. Accurate first-principles structures and energies of diversely bonded systems from an efficient density functional

    Science.gov (United States)

    Sun, Jianwei; Remsing, Richard C.; Zhang, Yubo; Sun, Zhaoru; Ruzsinszky, Adrienn; Peng, Haowei; Yang, Zenghui; Paul, Arpita; Waghmare, Umesh; Wu, Xifan; Klein, Michael L.; Perdew, John P.

    2016-09-01

    One atom or molecule binds to another through various types of bond, the strengths of which range from several meV to several eV. Although some computational methods can provide accurate descriptions of all bond types, those methods are not efficient enough for many studies (for example, large systems, ab initio molecular dynamics and high-throughput searches for functional materials). Here, we show that the recently developed non-empirical strongly constrained and appropriately normed (SCAN) meta-generalized gradient approximation (meta-GGA) within the density functional theory framework predicts accurate geometries and energies of diversely bonded molecules and materials (including covalent, metallic, ionic, hydrogen and van der Waals bonds). This represents a significant improvement at comparable efficiency over its predecessors, the GGAs that currently dominate materials computation. Often, SCAN matches or improves on the accuracy of a computationally expensive hybrid functional, at almost-GGA cost. SCAN is therefore expected to have a broad impact on chemistry and materials science.

  2. Reliable and reproducible classification system for scoliotic radiograph using image processing techniques.

    Science.gov (United States)

    Anitha, H; Prabhu, G K; Karunakar, A K

    2014-11-01

    Scoliosis classification is useful for guiding the treatment and testing the clinical outcome. State-of-the-art classification procedures are inherently unreliable and non-reproducible due to technical and human judgmental error. In the current diagnostic system each examiner will have diagrammatic summary of classification procedure, number of scoliosis curves, apex level, etc. It is very difficult to define the required anatomical parameters in the noisy radiographs. The classification system demands automatic image understanding system. The proposed automated classification procedures extracts the anatomical features using image processing and applies classification procedures based on computer assisted algorithms. The reliability and reproducibility of the proposed computerized image understanding system are compared with manual and computer assisted system using Kappa values.

  3. A new methodology for constructing a publication-level classification system of science

    CERN Document Server

    Waltman, Ludo

    2012-01-01

    Classifying journals or publications into research areas is an essential element of many bibliometric analyses. Classification usually takes place at the level of journals, where the Web of Science subject categories are the most popular classification system. However, journal-level classification systems have two important limitations: They offer only a limited amount of detail, and they have difficulties with multidisciplinary journals. To avoid these limitations, we introduce a new methodology for constructing classification systems at the level of individual publications. In the proposed methodology, publications are clustered into research areas based on citation relations. The methodology is able to deal with very large numbers of publications. We present an application in which a classification system is produced that includes almost ten million publications. Based on an extensive analysis of this classification system, we discuss the strengths and the limitations of the proposed methodology. Important...

  4. Volunteer-Based System for classification of traffic in computer networks

    DEFF Research Database (Denmark)

    Bujlow, Tomasz; Balachandran, Kartheepan; Riaz, M. Tahir

    2011-01-01

    To overcome the drawbacks of existing methods for traffic classification (by ports, Deep Packet Inspection, statistical classification) a new system was developed, in which the data are collected from client machines. This paper presents design of the system, implementation, initial runs and obta......To overcome the drawbacks of existing methods for traffic classification (by ports, Deep Packet Inspection, statistical classification) a new system was developed, in which the data are collected from client machines. This paper presents design of the system, implementation, initial runs...

  5. From fault classification to fault tolerance for multi-agent systems

    CERN Document Server

    Potiron, Katia; Taillibert, Patrick

    2013-01-01

    Faults are a concern for Multi-Agent Systems (MAS) designers, especially if the MAS are built for industrial or military use because there must be some guarantee of dependability. Some fault classification exists for classical systems, and is used to define faults. When dependability is at stake, such fault classification may be used from the beginning of the system's conception to define fault classes and specify which types of faults are expected. Thus, one may want to use fault classification for MAS; however, From Fault Classification to Fault Tolerance for Multi-Agent Systems argues that

  6. Classification systems in nursing : Formalizing nursing knowledge and implications for nursing information systems

    NARCIS (Netherlands)

    Goossen, WTF; Epping, PJMM; Abraham, IL

    1996-01-01

    The development of nursing information systems (NIS) is often hampered by the fact that nursing lacks a unified nursing terminology and classification system. Currently there exist various initiatives in this area. We address the question as to how current initiatives in the development of nursing t

  7. Classification systems in nursing : Formalizing nursing knowledge and implications for nursing information systems

    NARCIS (Netherlands)

    Goossen, WTF; Epping, PJMM; Abraham, IL

    1996-01-01

    The development of nursing information systems (NIS) is often hampered by the fact that nursing lacks a unified nursing terminology and classification system. Currently there exist various initiatives in this area. We address the question as to how current initiatives in the development of nursing t

  8. Classification systems in nursing : Formalizing nursing knowledge and implications for nursing information systems

    NARCIS (Netherlands)

    Goossen, WTF; Epping, PJMM; Abraham, IL

    The development of nursing information systems (NIS) is often hampered by the fact that nursing lacks a unified nursing terminology and classification system. Currently there exist various initiatives in this area. We address the question as to how current initiatives in the development of nursing

  9. Risk classification and uncertainty propagation for virtual water distribution systems

    Energy Technology Data Exchange (ETDEWEB)

    Torres, Jacob M. [Department of Geography and Environmental Engineering, Johns Hopkins University, Baltimore, MD 21218 (United States)], E-mail: jato@jhu.edu; Brumbelow, Kelly [Zachry Department of Civil Engineering, Texas A and M University, College Station, TX 77843 (United States); Guikema, Seth D. [Department of Geography and Environmental Engineering, Johns Hopkins University, Baltimore, MD 21218 (United States)

    2009-08-15

    While the secrecy of real water distribution system data is crucial, it poses difficulty for research as results cannot be publicized. This data includes topological layouts of pipe networks, pump operation schedules, and water demands. Therefore, a library of virtual water distribution systems can be an important research tool for comparative development of analytical methods. A virtual city, 'Micropolis', has been developed, including a comprehensive water distribution system, as a first entry into such a library. This virtual city of 5000 residents is fully described in both geographic information systems (GIS) and EPANet hydraulic model frameworks. A risk classification scheme and Monte Carlo analysis are employed for an attempted water supply contamination attack. Model inputs to be considered include uncertainties in: daily water demand, seasonal demand, initial storage tank levels, the time of day a contamination event is initiated, duration of contamination event, and contaminant quantity. Findings show that reasonable uncertainties in model inputs produce high variability in exposure levels. It is also shown that exposure level distributions experience noticeable sensitivities to population clusters within the contaminant spread area. High uncertainties in exposure patterns lead to greater resources needed for more effective mitigation strategies.

  10. The Self-Directed Violence Classification System and the Columbia Classification Algorithm for Suicide Assessment: A Crosswalk

    Science.gov (United States)

    Matarazzo, Bridget B.; Clemans, Tracy A.; Silverman, Morton M.; Brenner, Lisa A.

    2013-01-01

    The lack of a standardized nomenclature for suicide-related thoughts and behaviors prompted the Centers for Disease Control and Prevention, with the Veterans Integrated Service Network 19 Mental Illness Research Education and Clinical Center, to create the Self-Directed Violence Classification System (SDVCS). SDVCS has been adopted by the…

  11. A Bayesian Based Search and Classification System for Product Information of Agricultural Logistics Information Technology

    OpenAIRE

    2011-01-01

    Part 1: Decision Support Systems, Intelligent Systems and Artificial Intelligence Applications; International audience; In order to meet the needs of users who search agricultural products logistics information technology, this paper introduces a search and classification system of agricultural products logistics information technology search and classification. Firstly, the dictionary of field concept word was built based on analyzing the characteristics of agricultural products logistics in...

  12. 48 CFR 19.303 - Determining North American Industry Classification System (NAICS) codes and size standards.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Determining North American Industry Classification System (NAICS) codes and size standards. 19.303 Section 19.303 Federal Acquisition... Classification System (NAICS) codes and size standards. (a) The contracting officer shall determine...

  13. CAST: a new program package for the accurate characterization of large and flexible molecular systems.

    Science.gov (United States)

    Grebner, Christoph; Becker, Johannes; Weber, Daniel; Bellinger, Daniel; Tafipolski, Maxim; Brückner, Charlotte; Engels, Bernd

    2014-09-15

    The presented program package, Conformational Analysis and Search Tool (CAST) allows the accurate treatment of large and flexible (macro) molecular systems. For the determination of thermally accessible minima CAST offers the newly developed TabuSearch algorithm, but algorithms such as Monte Carlo (MC), MC with minimization, and molecular dynamics are implemented as well. For the determination of reaction paths, CAST provides the PathOpt, the Nudge Elastic band, and the umbrella sampling approach. Access to free energies is possible through the free energy perturbation approach. Along with a number of standard force fields, a newly developed symmetry-adapted perturbation theory-based force field is included. Semiempirical computations are possible through DFTB+ and MOPAC interfaces. For calculations based on density functional theory, a Message Passing Interface (MPI) interface to the Graphics Processing Unit (GPU)-accelerated TeraChem program is available. The program is available on request.

  14. Towards an expert system for accurate diagnosis and progress monitoring of Parkinson's disease.

    Science.gov (United States)

    Alexiou, Athanasios; Psiha, Maria; Vlamos, Panayiotis

    2015-01-01

    While Parkinson's disease is a chronic and progressive movement disorder, no one can predict which symptoms will affect an individual patient. At the present time there is no cure for Parkinson's disease but instead a variety of alternative treatments provide relief from the symptoms. Due to these unpromising factors, we propose a new multi-scale ontology-based modeling technology for the accurate diagnosis of Parkinson's disease and its progress monitoring. The proposed model will be used to assess the status of the patient with PD corresponding treatments using a multilayer neural network. The proposed tool also aims to identify new associated physical and biological biomarkers from heterogeneous patients' data. The architecture of this expert system and its implementation in Protégé is presented in this paper.

  15. A fast and accurate initial alignment method for strapdown inertial navigation system on stationary base

    Institute of Scientific and Technical Information of China (English)

    Xinlong WANG; Gongxun SHEN

    2005-01-01

    In this work,a fast and accurate stationary alignment method for strapdown inertial navigation system (SINS) is proposed.It has been demonstrated that the stationary alignment of SINS can be improved by employing the multiposition technique,but the alignment time of the azimuth error is relatively longer.Over here,the two-position alignment principle is presented.On the basis of this SINS error model,a fast estimation algorithm of the azimuth error for the initial alignment of SINS on stationary base is derived fully from the horizontal velocity outputs and the output rates,and the novel azimuth error estimation algorithm is used for the two-position alignment.Consequently,the speed and accuracy of the SINS's initial alignment is enhanced greatly.The computer simulation results illustrate the efficiency of this alignment method.

  16. Fast and spectrally accurate Ewald summation for 2-periodic electrostatic systems

    CERN Document Server

    Lindbo, Dag

    2011-01-01

    A new method for Ewald summation in planar/slablike geometry, i.e. systems where periodicity applies in two dimensions and the last dimension is "free" (2P), is presented. We employ a spectral representation in terms of both Fourier series and integrals. This allows us to concisely derive both the 2P Ewald sum and a fast PME-type method suitable for large-scale computations. The primary results are: (i) close and illuminating connections between the 2P problem and the standard Ewald sum and associated fast methods for full periodicity; (ii) a fast, O(N log N), and spectrally accurate PME-type method for the 2P k-space Ewald sum that uses vastly less memory than traditional PME methods; (iii) errors that decouple, such that parameter selection is simplified. We give analytical and numerical results to support this.

  17. Numerical system utilising a Monte Carlo calculation method for accurate dose assessment in radiation accidents.

    Science.gov (United States)

    Takahashi, F; Endo, A

    2007-01-01

    A system utilising radiation transport codes has been developed to derive accurate dose distributions in a human body for radiological accidents. A suitable model is quite essential for a numerical analysis. Therefore, two tools were developed to setup a 'problem-dependent' input file, defining a radiation source and an exposed person to simulate the radiation transport in an accident with the Monte Carlo calculation codes-MCNP and MCNPX. Necessary resources are defined by a dialogue method with a generally used personal computer for both the tools. The tools prepare human body and source models described in the input file format of the employed Monte Carlo codes. The tools were validated for dose assessment in comparison with a past criticality accident and a hypothesized exposure.

  18. Can radiation therapy treatment planning system accurately predict surface doses in postmastectomy radiation therapy patients?

    Energy Technology Data Exchange (ETDEWEB)

    Wong, Sharon [National University of Singapore, Yong Loo Lin School of Medicine (Singapore); Back, Michael [Northern Sydney Cancer Centre, Royal North Shore Hospital, St Leonards, New South Wales (Australia); Tan, Poh Wee; Lee, Khai Mun; Baggarley, Shaun [National University, Cancer Institute, Department of Radiation Oncology, National University, Hospital, Tower Block (Singapore); Lu, Jaide Jay, E-mail: mdcljj@nus.edu.sg [National University of Singapore, Yong Loo Lin School of Medicine (Singapore); National University, Cancer Institute, Department of Radiation Oncology, National University, Hospital, Tower Block (Singapore)

    2012-07-01

    Skin doses have been an important factor in the dose prescription for breast radiotherapy. Recent advances in radiotherapy treatment techniques, such as intensity-modulated radiation therapy (IMRT) and new treatment schemes such as hypofractionated breast therapy have made the precise determination of the surface dose necessary. Detailed information of the dose at various depths of the skin is also critical in designing new treatment strategies. The purpose of this work was to assess the accuracy of surface dose calculation by a clinically used treatment planning system and those measured by thermoluminescence dosimeters (TLDs) in a customized chest wall phantom. This study involved the construction of a chest wall phantom for skin dose assessment. Seven TLDs were distributed throughout each right chest wall phantom to give adequate representation of measured radiation doses. Point doses from the CMS Xio Registered-Sign treatment planning system (TPS) were calculated for each relevant TLD positions and results correlated. There were no significant difference between measured absorbed dose by TLD and calculated doses by the TPS (p > 0.05 (1-tailed). Dose accuracy of up to 2.21% was found. The deviations from the calculated absorbed doses were overall larger (3.4%) when wedges and bolus were used. 3D radiotherapy TPS is a useful and accurate tool to assess the accuracy of surface dose. Our studies have shown that radiation treatment accuracy expressed as a comparison between calculated doses (by TPS) and measured doses (by TLD dosimetry) can be accurately predicted for tangential treatment of the chest wall after mastectomy.

  19. Neural network diagnostic system for dengue patients risk classification.

    Science.gov (United States)

    Faisal, Tarig; Taib, Mohd Nasir; Ibrahim, Fatimah

    2012-04-01

    With the dramatic increase of the worldwide threat of dengue disease, it has been very crucial to correctly diagnose the dengue patients in order to decrease the disease severity. However, it has been a great challenge for the physicians to identify the level of risk in dengue patients due to overlapping of the medical classification criteria. Therefore, this study aims to construct a noninvasive diagnostic system to assist the physicians for classifying the risk in dengue patients. Systematic producers have been followed to develop the system. Firstly, the assessment of the significant predictors associated with the level of risk in dengue patients was carried out utilizing the statistical analyses technique. Secondly, Multilayer perceptron neural network models trained via Levenberg-Marquardt and Scaled Conjugate Gradient algorithms was employed for constructing the diagnostic system. Finally, precise tuning for the models' parameters was conducted in order to achieve the optimal performance. As a result, 9 noninvasive predictors were found to be significantly associated with the level of risk in dengue patients. By employing those predictors, 75% prediction accuracy has been achieved for classifying the risk in dengue patients using Scaled Conjugate Gradient algorithm while 70.7% prediction accuracy were achieved by using Levenberg-Marquardt algorithm.

  20. A hitchhiker's guide to myeloid cell subsets: practical implementation of a novel mononuclear phagocyte classification system

    Directory of Open Access Journals (Sweden)

    Martin eGuilliams

    2015-08-01

    Full Text Available The classification of mononuclear phagocytes as either dendritic cells or macrophages has been mainly based on morphology, the expression of surface markers and assumed functional specialization. We have recently proposed a novel classification system of mononuclear phagocytes based on their ontogeny. Here we discuss the practical application of such a classification system through a number of prototypical examples we have encountered while hitchhiking from one subset to another, across species and between steady state and inflammatory settings. Finally, we discuss the advantages and drawbacks of such a classification system and propose a number of improvements to move from theoretical concepts to concrete guidelines.

  1. A miniature shoe-mounted orientation determination system for accurate indoor heading and trajectory tracking

    Science.gov (United States)

    Zhang, Shengzhi; Yu, Shuai; Liu, Chaojun; Liu, Sheng

    2016-06-01

    Tracking the position of pedestrian is urgently demanded when the most commonly used GPS (Global Position System) is unavailable. Benefited from the small size, low-power consumption, and relatively high reliability, micro-electro-mechanical system sensors are well suited for GPS-denied indoor pedestrian heading estimation. In this paper, a real-time miniature orientation determination system (MODS) was developed for indoor heading and trajectory tracking based on a novel dual-linear Kalman filter. The proposed filter precludes the impact of geomagnetic distortions on pitch and roll that the heading is subjected to. A robust calibration approach was designed to improve the accuracy of sensors measurements based on a unified sensor model. Online tests were performed on the MODS with an improved turntable. The results demonstrate that the average RMSE (root-mean-square error) of heading estimation is less than 1°. Indoor heading experiments were carried out with the MODS mounted on the shoe of pedestrian. Besides, we integrated the existing MODS into an indoor pedestrian dead reckoning application as an example of its utility in realistic actions. A human attitude-based walking model was developed to calculate the walking distance. Test results indicate that mean percentage error of indoor trajectory tracking achieves 2% of the total walking distance. This paper provides a feasible alternative for accurate indoor heading and trajectory tracking.

  2. Diagnosis and classification of central nervous system vasculitis.

    Science.gov (United States)

    Hajj-Ali, Rula A; Calabrese, Leonard H

    2014-01-01

    Central nervous system vasculitis is one of the foremost diagnostic challenges in rheumatology. It results in inflammation and destruction of the vasculature within the CNS. When vasculitis is confined to brain, meninges or spinal cord, it is referred to as primary angiitis of the CNS. Secondary CNS vasculitis occurs in the setting of a systemic vasculitis, auto-inflammatory or infectious disease. Prompt and accurate diagnosis of CNS vasculitis is essential to prevent irreversible brain damage, and to secure precise treatment decisions. Progressive debilitating and unexplained neurological deficits, associated with abnormal cerebrospinal fluid is the typical picture of the disease. Biopsy of the brain remains the gold standard diagnostic test. The differential diagnosis of CNS vasculitis is highly diverse with a broad array of mimics at the clinical, radiographic and angiographic levels.

  3. Application of Artificial Immune System Approach in MRI Classification

    Directory of Open Access Journals (Sweden)

    Gia-Hao Chang

    2008-05-01

    Full Text Available Numerous scholars have submitted the theory and research of artificial immune systems (AISs in recent years. Although AIS has been used in various fields, applying the AIS to medical images is very rare. The purpose of this study is using the clonal selection algorithm (CSA of artificial immune systems for classifying the brain MRI, and displaying a single organism image which can finally offer faster organism reference information to a doctor; hence reducing the time to ascertain large number of images, so that the doctor can diagnose the nidus more efficiently and accurately. In order to verify the feasibility and efficiency of this method, we adopt statistical theory for manifold assessment and compare with the perceptron network of double layers, FCM method. The result proves that the method of this study is both feasible and useful.

  4. Superiority of Classification Tree versus Cluster, Fuzzy and Discriminant Models in a Heartbeat Classification System.

    Directory of Open Access Journals (Sweden)

    Vessela Krasteva

    Full Text Available This study presents a 2-stage heartbeat classifier of supraventricular (SVB and ventricular (VB beats. Stage 1 makes computationally-efficient classification of SVB-beats, using simple correlation threshold criterion for finding close match with a predominant normal (reference beat template. The non-matched beats are next subjected to measurement of 20 basic features, tracking the beat and reference template morphology and RR-variability for subsequent refined classification in SVB or VB-class by Stage 2. Four linear classifiers are compared: cluster, fuzzy, linear discriminant analysis (LDA and classification tree (CT, all subjected to iterative training for selection of the optimal feature space among extended 210-sized set, embodying interactive second-order effects between 20 independent features. The optimization process minimizes at equal weight the false positives in SVB-class and false negatives in VB-class. The training with European ST-T, AHA, MIT-BIH Supraventricular Arrhythmia databases found the best performance settings of all classification models: Cluster (30 features, Fuzzy (72 features, LDA (142 coefficients, CT (221 decision nodes with top-3 best scored features: normalized current RR-interval, higher/lower frequency content ratio, beat-to-template correlation. Unbiased test-validation with MIT-BIH Arrhythmia database rates the classifiers in descending order of their specificity for SVB-class: CT (99.9%, LDA (99.6%, Cluster (99.5%, Fuzzy (99.4%; sensitivity for ventricular ectopic beats as part from VB-class (commonly reported in published beat-classification studies: CT (96.7%, Fuzzy (94.4%, LDA (94.2%, Cluster (92.4%; positive predictivity: CT (99.2%, Cluster (93.6%, LDA (93.0%, Fuzzy (92.4%. CT has superior accuracy by 0.3-6.8% points, with the advantage for easy model complexity configuration by pruning the tree consisted of easy interpretable 'if-then' rules.

  5. An overview of some historical knowledge organisation systems and classifications with a special emphasy on monastery libraries’ classification

    Directory of Open Access Journals (Sweden)

    Sonja Svoljšak

    2005-01-01

    Full Text Available The article gives an overview of some most prominent historical turning – points in the field of knowledge organization an2d western European sistematization of science, based on Greek and christian philosophy. Some examples of earlier attempts to unify the systems of knowledge organization and science systematization are presented. Some specific systems of the most prominent European christian religious orders’ library contents arrangement and classification are described in this context.

  6. Fast, automatic, and accurate catheter reconstruction in HDR brachytherapy using an electromagnetic 3D tracking system

    Energy Technology Data Exchange (ETDEWEB)

    Poulin, Eric; Racine, Emmanuel; Beaulieu, Luc, E-mail: Luc.Beaulieu@phy.ulaval.ca [Département de physique, de génie physique et d’optique et Centre de recherche sur le cancer de l’Université Laval, Université Laval, Québec, Québec G1V 0A6, Canada and Département de radio-oncologie et Axe Oncologie du Centre de recherche du CHU de Québec, CHU de Québec, 11 Côte du Palais, Québec, Québec G1R 2J6 (Canada); Binnekamp, Dirk [Integrated Clinical Solutions and Marketing, Philips Healthcare, Veenpluis 4-6, Best 5680 DA (Netherlands)

    2015-03-15

    Purpose: In high dose rate brachytherapy (HDR-B), current catheter reconstruction protocols are relatively slow and error prone. The purpose of this technical note is to evaluate the accuracy and the robustness of an electromagnetic (EM) tracking system for automated and real-time catheter reconstruction. Methods: For this preclinical study, a total of ten catheters were inserted in gelatin phantoms with different trajectories. Catheters were reconstructed using a 18G biopsy needle, used as an EM stylet and equipped with a miniaturized sensor, and the second generation Aurora{sup ®} Planar Field Generator from Northern Digital Inc. The Aurora EM system provides position and orientation value with precisions of 0.7 mm and 0.2°, respectively. Phantoms were also scanned using a μCT (GE Healthcare) and Philips Big Bore clinical computed tomography (CT) system with a spatial resolution of 89 μm and 2 mm, respectively. Reconstructions using the EM stylet were compared to μCT and CT. To assess the robustness of the EM reconstruction, five catheters were reconstructed twice and compared. Results: Reconstruction time for one catheter was 10 s, leading to a total reconstruction time inferior to 3 min for a typical 17-catheter implant. When compared to the μCT, the mean EM tip identification error was 0.69 ± 0.29 mm while the CT error was 1.08 ± 0.67 mm. The mean 3D distance error was found to be 0.66 ± 0.33 mm and 1.08 ± 0.72 mm for the EM and CT, respectively. EM 3D catheter trajectories were found to be more accurate. A maximum difference of less than 0.6 mm was found between successive EM reconstructions. Conclusions: The EM reconstruction was found to be more accurate and precise than the conventional methods used for catheter reconstruction in HDR-B. This approach can be applied to any type of catheters and applicators.

  7. Classification of toddler nutritional status using fuzzy inference system (FIS)

    Science.gov (United States)

    Permatasari, Dian; Azizah, Isnaini Nur; Hadiat, Hanifah Latifah; Abadi, Agus Maman

    2017-08-01

    Nutrition is a major health problem and concern for parents when it is relating with their toddler. The nutritional status is an expression of the state caused by the status of the balance between the number of intake of nutrients and the amount needed by the body for a variety of biological functions. The indicators that often used to determine the nutritional status is the combination of Weight (W) and Height (H) symbolized by W/H, because it describe a sensitive and specific nutritional status. This study aims to apply the Fuzzy Inference System Mamdani method to classify the nutritional status of toddler. The inputs are weight and height of the toddler. There are nine rules that used and the output is nutritional status classification consisting of four criteria: stunting, wasting, normal, and overweight. Fuzzy Inference System that be used is Mamdani method and the defuzzification use Centroid Method. The result of this study is compared with Assessment Anthropometric Standard of Toddler Nutritional Status by Ministry of Health. The accuracy level of this fuzzy model is about 84%.

  8. Robust and accurate visual echo cancellation in a full-duplex projector-camera system.

    Science.gov (United States)

    Liao, Miao; Yang, Ruigang; Zhang, Zhengyou

    2008-10-01

    In this paper we study the problem of "visual echo" in a full-duplex projector-camera system for telecollaboration applications. Visual echo is defined as the appearance of projected contents observed by the camera. It can potentially saturate the projected contents, similar to audio echo in telephone conversation. Our approach to visual echo cancellation includes an offline calibration procedure that records the geometric and photometric transfer between the projector and the camera in a look-up table. During run-time, projected contents in the captured video are identified using the calibration information and suppressed, therefore achieving the goal of cancelling visual echo. Our approach can accurately handle full-color images under arbitrary reflectance of display surfaces and photometric response of the projector or camera. It is robust to geometric registration errors and quantization effects and is therefore particularly effective for high-frequency contents such as texts and hand drawings. We demonstrate the effectiveness of our approach with a variety of real images in a full-duplex projector-camera system.

  9. 77 FR 56755 - Small Business Size Standards; Adoption of 2012 North American Industry Classification System for...

    Science.gov (United States)

    2012-09-14

    ... modifications of the North American Industry Classification System (NAICS) into its table of small business size... RIN 3245-AG47 Small Business Size Standards; Adoption of 2012 North American Industry Classification System for Size Standards; Correction AGENCY: U.S. Small Business Administration. ACTION: Interim...

  10. Perceptual and Acoustic Reliability Estimates for the Speech Disorders Classification System (SDCS)

    Science.gov (United States)

    Shriberg, Lawrence D.; Fourakis, Marios; Hall, Sheryl D.; Karlsson, Heather B.; Lohmeier, Heather L.; McSweeny, Jane L.; Potter, Nancy L.; Scheer-Cohen, Alison R.; Strand, Edythe A.; Tilkens, Christie M.; Wilson, David L.

    2010-01-01

    A companion paper describes three extensions to a classification system for paediatric speech sound disorders termed the Speech Disorders Classification System (SDCS). The SDCS uses perceptual and acoustic data reduction methods to obtain information on a speaker's speech, prosody, and voice. The present paper provides reliability estimates for…

  11. 42 CFR 419.31 - Ambulatory payment classification (APC) system and payment weights.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Ambulatory payment classification (APC) system and... Outpatient Services § 419.31 Ambulatory payment classification (APC) system and payment weights. (a) APC... the Federal Food, Drug and Cosmetic Act. (3) The payment rate determined for an APC group...

  12. Perceptual and Acoustic Reliability Estimates for the Speech Disorders Classification System (SDCS)

    Science.gov (United States)

    Shriberg, Lawrence D.; Fourakis, Marios; Hall, Sheryl D.; Karlsson, Heather B.; Lohmeier, Heather L.; McSweeny, Jane L.; Potter, Nancy L.; Scheer-Cohen, Alison R.; Strand, Edythe A.; Tilkens, Christie M.; Wilson, David L.

    2010-01-01

    A companion paper describes three extensions to a classification system for paediatric speech sound disorders termed the Speech Disorders Classification System (SDCS). The SDCS uses perceptual and acoustic data reduction methods to obtain information on a speaker's speech, prosody, and voice. The present paper provides reliability estimates for…

  13. Danish translation and validation of the International Skin Tear Advisory Panel Skin Tear Classification System

    DEFF Research Database (Denmark)

    Skiveren, J; Bermark, S; LeBlanc, K

    2015-01-01

    OBJECTIVE: The aim of this study was to translate, validate and establish reliability of the International Skin Tear Classification System in Danish. METHOD: Phase 1 of the project involved the translation of the International Skin Tear Advisory Panel (ISTAP) Skin Tear Classification System...... and external validation by the ISTAP group. The subjects were approached in their place of work and invited to participate in the study and to attend an educational session related to skin tears. RESULTS: The Danish translation of the ISTAP classification system was tested on 270 non-wound specialists...... the earlier ISTAP study and further validates the classification system. The Danish translation of the classification system is vital to the promotion of skin tears in both research and the clinical settings in Denmark....

  14. Comparison of wheat classification accuracy using different classifiers of the image-100 system

    Science.gov (United States)

    Dejesusparada, N. (Principal Investigator); Chen, S. C.; Moreira, M. A.; Delima, A. M.

    1981-01-01

    Classification results using single-cell and multi-cell signature acquisition options, a point-by-point Gaussian maximum-likelihood classifier, and K-means clustering of the Image-100 system are presented. Conclusions reached are that: a better indication of correct classification can be provided by using a test area which contains various cover types of the study area; classification accuracy should be evaluated considering both the percentages of correct classification and error of commission; supervised classification approaches are better than K-means clustering; Gaussian distribution maximum likelihood classifier is better than Single-cell and Multi-cell Signature Acquisition Options of the Image-100 system; and in order to obtain a high classification accuracy in a large and heterogeneous crop area, using Gaussian maximum-likelihood classifier, homogeneous spectral subclasses of the study crop should be created to derive training statistics.

  15. A new classification system for ischemia using a combination of deep and periventricular white matter hyperintensities.

    Science.gov (United States)

    Noh, Young; Lee, Yunhwan; Seo, Sang Won; Jeong, Jee H; Choi, Seong Hye; Back, Joung Hwan; Woo, Sook-Young; Kim, Geon Ha; Shin, Ji Soo; Kim, Chi Hun; Cho, Hanna; Park, Joon Sung; Lee, Jong-Min; Hong, Chang Hyung; Kim, Sang Yun; Lee, Jae-Hong; Kim, Seong Yoon; Park, Kee Hyung; Han, Seol-Heui; Cheong, Hae-Kwan; Na, Duk L

    2014-04-01

    The Clinical Research Center for Dementia of South Korea (CREDOS) group developed a new classification system for ischemia using a combination of deep and periventricular white matter hyperintensities (WMHs). In this study, we aimed to evaluate the validity of the CREDOS ischemia classification system. A total of 352 patients with cognitive impairments were included. Their WMH scores were rated using the CREDOS WMH visual rating scale. These patients were divided into 3 groups according to the CREDOS ischemia classification system. The volume of WMH was also automatically measured. The number of lacunes and microbleeds (MBs) were counted. The CREDOS ischemia classification system was revised with factor analysis using vascular risk factors and cerebrovascular disease (CVD) markers (WMH volume, lacunes, and MBs). External validation was performed in another group of patients with cognitive impairment using multinomial logistic regression analysis. The CREDOS WMH visual rating scale showed excellent correlation with the automatically measured volume of WMH. The factor analysis showed that the severe group was expanded to D3P1 and D3P2 in the revised CREDOS ischemia classification system. In the validation group, the presence of vascular risk factors and the severity of CVD markers could be distinguished according to the revised CREDOS ischemia classification. We validated a newly developed classification system for ischemia. This simple visual classification system was capable of providing information on vascular risk factors and CVD markers by simply rating WMH on magnetic resonance imaging.

  16. Genetic Programming Based Ensemble System for Microarray Data Classification

    Directory of Open Access Journals (Sweden)

    Kun-Hong Liu

    2015-01-01

    Full Text Available Recently, more and more machine learning techniques have been applied to microarray data analysis. The aim of this study is to propose a genetic programming (GP based new ensemble system (named GPES, which can be used to effectively classify different types of cancers. Decision trees are deployed as base classifiers in this ensemble framework with three operators: Min, Max, and Average. Each individual of the GP is an ensemble system, and they become more and more accurate in the evolutionary process. The feature selection technique and balanced subsampling technique are applied to increase the diversity in each ensemble system. The final ensemble committee is selected by a forward search algorithm, which is shown to be capable of fitting data automatically. The performance of GPES is evaluated using five binary class and six multiclass microarray datasets, and results show that the algorithm can achieve better results in most cases compared with some other ensemble systems. By using elaborate base classifiers or applying other sampling techniques, the performance of GPES may be further improved.

  17. Accurate Compensation of Attitude Angle Error in a Dual-Axis Rotation Inertial Navigation System

    Science.gov (United States)

    Jiang, Rui; Yang, Gongliu; Zou, Rui; Wang, Jing; Li, Jing

    2017-01-01

    In the dual-axis rotation inertial navigation system (INS), besides the gyro error, accelerometer error, rolling misalignment angle error, and the gimbal angle error, the shaft swing angle and the axis non-orthogonal angle also affect the attitude accuracy. Through the analysis of the structure, we can see that the shaft swing angle and axis non-orthogonal angle will produce coning errors which cause the fluctuation of the attitude. According to the analysis of the rotation vector, it can be seen that the coning error will generate additional drift velocity along the rotating shaft, which can reduce the navigation precision of the system. In this paper, based on the establishment of the modulation average frame, the vector projection is carried out, and then the attitude conversion matrix and the attitude error matrix mainly including the shaft swing angle and axis non-orthogonal are obtained. Because the attitude angles are given under the static condition, the shaft swing angle and the axis non-orthogonal angle are estimated by the static Kalman filter (KF). This kind of KF method has been widely recognized as the standard optimal estimation tool for estimating the parameters such as coning angles (α1 , α2), initial phase angles (ϕ1,ϕ2), and the non-perpendicular angle (η). In order to carry out the system level verification, a dual axis rotation INS is designed. Through simulation and experiments, the results show that the amplitudes of the attitude angles’ variation are reduced by about 20%–30% when the shaft rotates. The attitude error equation is reasonably simplified and the calibration method is accurate enough. The attitude accuracy is further improved. PMID:28304354

  18. Ovarian tumor characterization and classification: a class of GyneScan™ systems.

    Science.gov (United States)

    Acharya, U Rajendra; Sree, Vinitha S; Saba, Luca; Molinari, Filippo; Guerriero, Stefano; Suri, Jasjit S

    2012-01-01

    In this work, we have developed an adjunct Computer Aided Diagnostic (CAD) technique that uses 3D acquired ultrasound images of the ovary and data mining algorithms to accurately characterize and classify benign and malignant ovarian tumors. In this technique, we extracted image-texture based and Higher Order Spectra (HOS) based features from the images. The significant features were then selected and used to train and test the Decision Tree (DT) classifier. The proposed technique was validated using 1000 benign and 1000 malignant images, obtained from 10 patients with benign and 10 with malignant disease, respectively. On evaluating the classifier with 10-fold stratified cross validation, we observed that the DT classifier presented a high accuracy of 95.1%, sensitivity of 92.5% and specificity of 97.7%. Thus, the four significant features could adequately quantify the subtle changes and nonlinearities in the pixel intensities. The preliminary results presented in this paper indicate that the proposed technique can be reliably used as an adjunct tool for ovarian tumor classification since the system is accurate, completely automated, cost-effective, and can be easily written as a software application for use in any computer.

  19. Transporter Classification Database (TCDB)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Transporter Classification Database details a comprehensive classification system for membrane transport proteins known as the Transporter Classification (TC)...

  20. Caco-2 cells, biopharmaceutics classification system (BCS) and biowaiver.

    Science.gov (United States)

    Smetanová, Libuse; Stĕtinová, Vĕra; Svoboda, Zbynek; Kvetina, Jaroslav

    2011-01-01

    Almost all orally administered drugs are absorbed across the intestinal mucosa. The Caco-2 monolayers are used as an in vitro model to predict drug absorption in humans and to explore mechanism of drug absorption. The Caco-2 cells are derived from a human colon adenocarcinoma and spontaneously differentiate to form confluent monolayer of polarized cells structurally and functionally resembling the small intestinal epithelium. For studying drug permeability, Caco-2 cells are seeded onto the Transwell inserts with semipermeable membrane and grown to late confluence (21 days). After determination of cell viability, the integrity of monolayer is checked by phenol red permeability and by 14C-mannitol permeability. The transport from apical to basolateral (AP-BL) and basolateral to apical (BL-AP) is studied by adding the diluted drug on the apical or basolateral side and withdrawing the samples from the opposite compartment, respectively, for HPLC analysis or liquid scintillation spectrometry. Ca2+ -free transport medium is used to determine paracellular component of the drug transport. On the basis of permeability and solubility, drugs can be categorized into four classes of Biopharmaceutics Classification System (BCS). For certain drugs, the BCS-based biowaiver approach can be used which enables to reduce in vivo bioequivalence studies.

  1. In vitro -in vivo correlation and biopharmaceutical classification system

    Directory of Open Access Journals (Sweden)

    R Tiwari

    2011-01-01

    Full Text Available In vitro dissolution has been extensively used as a quality control tool for solid oral dosage forms. In several cases, however, it is not known whether one can predict the in vivo performance of these products from in vitro dissolution data. In an effort to minimize unnecessary human testing, investigations of in vitro-in vivo correlations (IVIVC between in vitro dissolution and in vivo bioavailability are increasingly becoming an integral part of extended release drug product development. Development, rapidity in drug development can be achieved by researchers on finding a mathematical link between bioavailability and dissolution testing, which leads to the concept of IVIVC. IVIVC is a mathematical model that can be used to estimate in vivo behavior from its in vitro performance. Among all the five levels of correlation, Level A correlation is widely accepted by the regulatory agencies. Biopharmaceutical classification system explains the suitability of IVIVC. Dissolution method design plays a pivotal role in the estimation of correlations. Applications of IVIVC ranges from drug and product development, their scale up and postapproval changes. Hence, IVIVC should be considered as an important tool in drug development.

  2. Correspondence between zooplankton assemblages and the Estuary Environment Classification system

    Science.gov (United States)

    Lucena-Moya, Paloma; Duggan, Ian C.

    2017-01-01

    We tested whether variability in zooplankton assemblages was consistent with the categories of estuarine environments proposed by the 'Estuary Environment Classification' system (EEC) (Hume et al., 2007) across a variety of North Island, New Zealand, estuaries. The EEC classifies estuaries in to eight categories (A to F) based primarily on a combination of three abiotic controlling factors: ocean forcing, river forcing and basin morphometry. Additionally, we tested whether Remane's curve, which predicts higher diversities of benthic macrofauna and high and low salinities, can be applied to zooplankton assemblages. We focused on three of the eight EEC categories (B, D and F), which covered the range of estuaries with river inputs dominating (B) to ocean influence dominating (F). Additionally, we included samples from river (FW) and sea (MW) to encompass the entire salinity range. Zooplankton assemblages varied across the categories examined in accordance with a salinity gradient predicted by the EEC. Three groups of zooplankton were distinguishable: the first formed by the most freshwater categories, FW and B, and dominated by rotifers (primarily Bdelloidea) and estuarine copepods (Gladioferans pectinatus), a second group formed by categories D and F, of intermediate salinity, dominated by copepods (Euterpina acutifrons), and a final group including the purely marine category MW and dominated also by E. acutifrons along with other marine taxa. Zooplankton diversity responded to the salinity gradient in a manner expected from Remane's curve. The results of this study support others which have shown salinity to be the main factor driving zooplankton community composition and diversity.

  3. A novel classification system for evolutionary aging theories

    Science.gov (United States)

    Trindade, Lucas S.; Aigaki, Toshiro; Peixoto, Alexandre A.; Balduino, Alex; Mânica da Cruz, Ivana B.; Heddle, Jonathan G.

    2013-01-01

    Theories of lifespan evolution are a source of confusion amongst aging researchers. After a century of aging research the dispute over whether the aging process is active or passive persists and a comprehensive and universally accepted theoretical model remains elusive. Evolutionary aging theories primarily dispute whether the aging process is exclusively adapted to favor the kin or exclusively non-adapted to favor the individual. Interestingly, contradictory data and theories supporting both exclusively programmed and exclusively non-programmed theories continue to grow. However, this is a false dichotomy; natural selection favors traits resulting in efficient reproduction whether they benefit the individual or the kin. Thus, to understand the evolution of aging, first we must understand the environment-dependent balance between the advantages and disadvantages of extended lifespan in the process of spreading genes. As described by distinct theories, different niches and environmental conditions confer on extended lifespan a range of fitness values varying from highly beneficial to highly detrimental. Here, we considered the range of fitness values for extended lifespan and develop a fitness-based framework for categorizing existing theories. We show that all theories can be classified into four basic types: secondary (beneficial), maladaptive (neutral), assisted death (detrimental), and senemorphic aging (varying between beneficial to detrimental). We anticipate that this classification system will assist with understanding and interpreting aging/death by providing a way of considering theories as members of one of these classes rather than consideration of their individual details. PMID:23508239

  4. A novel classification system for evolutionary aging theories.

    Science.gov (United States)

    Trindade, Lucas S; Aigaki, Toshiro; Peixoto, Alexandre A; Balduino, Alex; Mânica da Cruz, Ivana B; Heddle, Jonathan G

    2013-01-01

    Theories of lifespan evolution are a source of confusion amongst aging researchers. After a century of aging research the dispute over whether the aging process is active or passive persists and a comprehensive and universally accepted theoretical model remains elusive. Evolutionary aging theories primarily dispute whether the aging process is exclusively adapted to favor the kin or exclusively non-adapted to favor the individual. Interestingly, contradictory data and theories supporting both exclusively programmed and exclusively non-programmed theories continue to grow. However, this is a false dichotomy; natural selection favors traits resulting in efficient reproduction whether they benefit the individual or the kin. Thus, to understand the evolution of aging, first we must understand the environment-dependent balance between the advantages and disadvantages of extended lifespan in the process of spreading genes. As described by distinct theories, different niches and environmental conditions confer on extended lifespan a range of fitness values varying from highly beneficial to highly detrimental. Here, we considered the range of fitness values for extended lifespan and develop a fitness-based framework for categorizing existing theories. We show that all theories can be classified into four basic types: secondary (beneficial), maladaptive (neutral), assisted death (detrimental), and senemorphic aging (varying between beneficial to detrimental). We anticipate that this classification system will assist with understanding and interpreting aging/death by providing a way of considering theories as members of one of these classes rather than consideration of their individual details.

  5. Biopharmaceutics classification system: importance and inclusion in biowaiver guidance

    Directory of Open Access Journals (Sweden)

    Lorena Barbosa Arrunátegui

    2015-03-01

    Full Text Available Pharmacological therapy is essential in many diseases treatment and it is important that the medicine policy is intended to offering safe and effective treatment with affordable price to the population. One way to achieve this is through biowaiver, defined as the replacement of in vivo bioequivalence studies by in vitro studies. For biowaiver of new immediate release solid oral dosage forms, data such as intestinal permeability and solubility of the drug are required, as well as the product dissolution. The Biopharmaceutics Classification System (BCS is a scientific scheme that divides drugs according to their solubility and permeability and has been used by various guides as a criterion for biowaiver. This paper evaluates biowaiver application, addressing the general concepts and parameters used by BCS, making a historical account of its use, the requirements pertaining to the current legislation, the benefits and risks associated with this decision. The results revealed that the use of BCS as a biowaiver criterion greatly expands the therapeutics options, contributing to greater therapy access of the general population with drug efficacy and safety guaranteed associated to low cost.

  6. Development of the Construction Classification System in Japan (JCCS)

    Institute of Scientific and Technical Information of China (English)

    Tatsuo Terai

    2008-01-01

    This paper deals with the intermediate results of the development of a national standardized clas-sification system called JCCS to ensure harmonized use of various kinds of information to be processed through the whole life cycle of construction projects in a nation-wide Japanese CALS/EC scheme. JCCS is planned to be a Japanese IFD and developped on the technical basis of ISO 12006-2 and 12006-3. Japan has currently no such an IFD-like library of terminologies which is to be an essential tool for the multiple and harmonized information processing, so that JCCS should be a key technology for the successful CALS/EC.First, the development concepts and related technologies are described. Second, evaluation of the current situation of information process in the construction industry is clarified, and followed by the requirements of the development of JCCS. In the main part, the current version of JCCS is outlined, major contents of which are the basic architecture of JCCS, JCCS schema, JCCS basic tables and the usage of JCCS in practice.Finally, future develoment in plan is briefly explained.

  7. Analysis on Design of Kohonen-network System Based on Classification of Complex Signals

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The key methods of detection and classification of the electroencephalogram(EEG) used in recent years are introduced . Taking EEG for example, the design plan of Kohonen neural network system based on detection and classification of complex signals is proposed, and both the network design and signal processing are analyzed, including pre-processing of signals, extraction of signal features, classification of signal and network topology, etc.

  8. Lie Group Classification of a Generalized Lane-Emden Type System in Two Dimensions

    Directory of Open Access Journals (Sweden)

    Motlatsi Molati

    2012-01-01

    Full Text Available The aim of this work is to perform a complete Lie symmetry classification of a generalized Lane-Emden type system in two dimensions which models many physical phenomena in biological and physical sciences. The classical approach of group classification is employed for classification. We show that several cases arise in classifying the arbitrary parameters, the forms of which include amongst others the power law nonlinearity, and exponential and quadratic forms.

  9. A multi-standard active-RC filter with accurate tuning system

    Energy Technology Data Exchange (ETDEWEB)

    Ma Heping; Yuan Fang; Shi Yin [Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China); Dai, F F, E-mail: hpma@semi.ac.c [Department of Electrical and Computer Engineering, Auburn University, Auburn, AL 36849-5201 (United States)

    2009-09-15

    A low-power, highly linear, multi-standard, active-RC filter with an accurate and novel tuning architecture is presented. It exhibits IEEE 802.11 a/b/g (9.5 MHz) and DVB-H (3 MHz, 4 MHz) application. The filter exploits digitally-controlled polysilicon resistor banks and a phase lock loop type automatic tuning system. The novel and complex automatic frequency calibration scheme provides better than 4 corner frequency accuracy, and it can be powered down after calibration to save power and avoid digital signal interference. The filter achieves OIP3 of 26 dBm and the measured group delay variation of the receiver filter is 50 ns (WLAN mode). Its dissipation is 3.4 mA in RX mode and 2.3 mA (only for one path) in TX mode from a 2.85 V supply. The dissipation of calibration consumes 2 mA. The circuit has been fabricated in a 0.35 {mu}m 47 GHz SiGe BiCMOS technology; the receiver and transmitter filter occupy 0.21 mm{sup 2} and 0.11 mm{sup 2} (calibration circuit excluded), respectively.

  10. Time-Accurate Unsteady Pressure Loads Simulated for the Space Launch System at Wind Tunnel Conditions

    Science.gov (United States)

    Alter, Stephen J.; Brauckmann, Gregory J.; Kleb, William L.; Glass, Christopher E.; Streett, Craig L.; Schuster, David M.

    2015-01-01

    A transonic flow field about a Space Launch System (SLS) configuration was simulated with the Fully Unstructured Three-Dimensional (FUN3D) computational fluid dynamics (CFD) code at wind tunnel conditions. Unsteady, time-accurate computations were performed using second-order Delayed Detached Eddy Simulation (DDES) for up to 1.5 physical seconds. The surface pressure time history was collected at 619 locations, 169 of which matched locations on a 2.5 percent wind tunnel model that was tested in the 11 ft. x 11 ft. test section of the NASA Ames Research Center's Unitary Plan Wind Tunnel. Comparisons between computation and experiment showed that the peak surface pressure RMS level occurs behind the forward attach hardware, and good agreement for frequency and power was obtained in this region. Computational domain, grid resolution, and time step sensitivity studies were performed. These included an investigation of pseudo-time sub-iteration convergence. Using these sensitivity studies and experimental data comparisons, a set of best practices to date have been established for FUN3D simulations for SLS launch vehicle analysis. To the author's knowledge, this is the first time DDES has been used in a systematic approach and establish simulation time needed, to analyze unsteady pressure loads on a space launch vehicle such as the NASA SLS.

  11. Quad-Band Bowtie Antenna Design for Wireless Communication System Using an Accurate Equivalent Circuit Model

    Directory of Open Access Journals (Sweden)

    Mohammed Moulay

    2015-01-01

    Full Text Available A novel configuration of quad-band bowtie antenna suitable for wireless application is proposed based on accurate equivalent circuit model. The simple configuration and low profile nature of the proposed antenna lead to easy multifrequency operation. The proposed antenna is designed to satisfy specific bandwidth specifications for current communication systems including the Bluetooth (frequency range 2.4–2.485 GHz and bands of the Unlicensed National Information Infrastructure (U-NII low band (frequency range 5.15–5.35 GHz and U-NII mid band (frequency range 5.47–5.725 GHz and used for mobile WiMAX (frequency range 3.3–3.6 GHz. To validate the proposed equivalent circuit model, the simulation results are compared with those obtained by the moments method of Momentum software, the finite integration technique of CST Microwave studio, and the finite element method of HFSS software. An excellent agreement is achieved for all the designed antennas. The analysis of the simulated results confirms the successful design of quad-band bowtie antenna.

  12. Fast and accurate generation method of PSF-based system matrix for PET reconstruction

    Science.gov (United States)

    Sun, Xiao-Li; Liu, Shuang-Quan; Yun, Ming-Kai; Li, Dao-Wu; Gao, Juan; Li, Mo-Han; Chai, Pei; Tang, Hao-Hui; Zhang, Zhi-Ming; Wei, Long

    2017-04-01

    This work investigates the positional single photon incidence response (P-SPIR) to provide an accurate point spread function (PSF)-contained system matrix and its incorporation within the image reconstruction framework. Based on the Geant4 Application for Emission Tomography (GATE) simulation, P-SPIR theory takes both incidence angle and incidence position of the gamma photon into account during crystal subdivision, instead of only taking the former into account, as in single photon incidence response (SPIR). The response distribution obtained in this fashion was validated using Monte Carlo simulations. In addition, two-block penetration and normalization of the response probability are introduced to improve the accuracy of the PSF. With the incorporation of the PSF, the homogenization model is then analyzed to calculate the spread distribution of each line-of-response (LOR). A primate PET scanner, Eplus-260, developed by the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP), was employed to evaluate the proposed method. The reconstructed images indicate that the P-SPIR method can effectively mitigate the depth-of-interaction (DOI) effect, especially at the peripheral area of field-of-view (FOV). Furthermore, the method can be applied to PET scanners with any other structures and list-mode data format with high flexibility and efficiency. Supported by National Natural Science Foundation of China (81301348) and China Postdoctoral Science Foundation (2015M570154)

  13. Toward a common classification approach for biorefinery systems

    NARCIS (Netherlands)

    Cherubini, F.; Jungmeier, G.; Wellisch, M.; Wilke, T.; Skiadas, I.; Ree, van R.; Jong, de E.

    2009-01-01

    This paper deals with a biorefinery classification approach developed within International Energy Agency (IEA) Bioenergy Task 42. Since production of transportation biofuels is seen as the driving force for future biorefinery developments, a selection of the most interesting transportation biofuels

  14. Toward a common classification approach for biorefinery systems

    NARCIS (Netherlands)

    Cherubini, F.; Jungmeier, G.; Wellisch, M.; Wilke, T.; Skiadas, I.; Ree, van R.; Jong, de E.

    2009-01-01

    This paper deals with a biorefinery classification approach developed within International Energy Agency (IEA) Bioenergy Task 42. Since production of transportation biofuels is seen as the driving force for future biorefinery developments, a selection of the most interesting transportation biofuels

  15. Clinical usefulness of the Vaughan Williams classification system.

    Science.gov (United States)

    Cobbe, S M

    1987-03-01

    The clinical usefulness of the Vaughan Williams classification scheme is limited by the complexity of the mechanisms of arrhythmia formation in man, which offer multiple potential sites for intervention. The properties of antiarrhythmic drugs may be considerably altered in abnormal myocardium. Despite these limitations, however, the classification provides a valuable conceptual framework for the understanding of the clinical electrophysiological properties of antiarrhythmic drugs and for their use.

  16. The postoperative COFAS end-stage ankle arthritis classification system: interobserver and intraobserver reliability.

    Science.gov (United States)

    Krause, Fabian G; Di Silvestro, Matthew; Penner, Murray J; Wing, Kevin J; Glazebrook, Mark A; Daniels, Timothy R; Lau, Johnny T C; Younger, Alastair S E

    2012-02-01

    End-stage ankle arthritis is operatively treated with numerous designs of total ankle replacement and different techniques for ankle fusion. For superior comparison of these procedures, outcome research requires a classification system to stratify patients appropriately. A postoperative 4-type classification system was designed by 6 fellowship-trained foot and ankle surgeons. Four surgeons reviewed blinded patient profiles and radiographs on 2 occasions to determine the interobserver and intraobserver reliability of the classification. Excellent interobserver reliability (κ = .89) and intraobserver reproducibility (κ = .87) were demonstrated for the postoperative classification system. In conclusion, the postoperative Canadian Orthopaedic Foot and Ankle Society (COFAS) end-stage ankle arthritis classification system appears to be a valid tool to evaluate the outcome of patients operated for end-stage ankle arthritis.

  17. An indigenous soil classification system for Bellona Island - a raised atoll in the Solomon Islands

    DEFF Research Database (Denmark)

    Elberling, Bo; Breuning-Madsen, Henrik; Bruun, Thilde Bech

    2010-01-01

    on the island. The Bellonese soil classification system is mainly based on the physical properties of the humus-containing top layer. Subsoil layers are only used for classification if they are very close to the surface and may be mixed with the topsoil. Results show a general agreement among farmers, who......One of the challenges of evaluating existing traditional farming systems is to combine local knowledge and modern scientific methods and terminology. This requires an evaluation of indigenous soil classification in modern terms. This paper focuses on an indigenous soil classification system...... developed by local farmers on the island of Bellona, Solomon Islands. The definitions of the different soil types are described and the principles of the classification system and the applicability of ethnopedology in soil surveys are discussed. Based on interviews with about 20 per cent of the farmers...

  18. The Bellevue Classification System: nursing's voice upon the library shelves*†

    Science.gov (United States)

    Mages, Keith C

    2011-01-01

    This article examines the inspiration, construction, and meaning of the Bellevue Classification System (BCS), created during the 1930s for use in the Bellevue School of Nursing Library. Nursing instructor Ann Doyle, with assistance from librarian Mary Casamajor, designed the BCS after consulting with library leaders and examining leading contemporary classification systems, including the Dewey Decimal Classification and Library of Congress, Ballard, and National Health Library classification systems. A close textual reading of the classes, subclasses, and subdivisions of these classification systems against those of the resulting BCS, reveals Doyle's belief that the BCS was created not only to organize the literature, but also to promote the burgeoning intellectualism and professionalism of early twentieth-century American nursing. PMID:21243054

  19. Hazard Classification of Household Chemical Products in Korea according to the Globally Harmonized System of Classification and labeling of Chemicals

    OpenAIRE

    Kim, Kyung-Hee; Song, Dae-Jong; Yu, Myeong-Hyun; Park, Yuon-Shin; Noh, Hye-Ran; Kim, Hae-Joon; Choi, Jae-Wook

    2013-01-01

    Objectives This study was conducted to review the validity of the need for the application of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) to household chemical products in Korea. The study also aimed to assess the severity of health and environmental hazards of household chemical products using the GHS. Methods 135 products were classified as ‘cleaning agents and polishing agents’ and 98 products were classified as ‘bleaches, disinfectants, and germicides....

  20. Topological, smooth and holomorphic classifications of nonautonomous linear differential systems and projective matrix Riccati equations

    CERN Document Server

    Gorbuzov, V N

    2011-01-01

    The questions of global topological, smooth and holomorphic classifications of the differential systems, defined by covering foliations, are considered. The received results are applied to nonautonomous linear differential systems and projective matrix Riccati equations.

  1. Understanding the use of standardized nursing terminology and classification systems in published research: A case study using the International Classification for Nursing Practice(®).

    Science.gov (United States)

    Strudwick, Gillian; Hardiker, Nicholas R

    2016-10-01

    In the era of evidenced based healthcare, nursing is required to demonstrate that care provided by nurses is associated with optimal patient outcomes, and a high degree of quality and safety. The use of standardized nursing terminologies and classification systems are a way that nursing documentation can be leveraged to generate evidence related to nursing practice. Several widely-reported nursing specific terminologies and classifications systems currently exist including the Clinical Care Classification System, International Classification for Nursing Practice(®), Nursing Intervention Classification, Nursing Outcome Classification, Omaha System, Perioperative Nursing Data Set and NANDA International. However, the influence of these systems on demonstrating the value of nursing and the professions' impact on quality, safety and patient outcomes in published research is relatively unknown. This paper seeks to understand the use of standardized nursing terminology and classification systems in published research, using the International Classification for Nursing Practice(®) as a case study. A systematic review of international published empirical studies on, or using, the International Classification for Nursing Practice(®) were completed using Medline and the Cumulative Index for Nursing and Allied Health Literature. Since 2006, 38 studies have been published on the International Classification for Nursing Practice(®). The main objectives of the published studies have been to validate the appropriateness of the classification system for particular care areas or populations, further develop the classification system, or utilize it to support the generation of new nursing knowledge. To date, most studies have focused on the classification system itself, and a lesser number of studies have used the system to generate information about the outcomes of nursing practice. Based on the published literature that features the International Classification for Nursing

  2. A new multi criteria classification approach in a multi agent system applied to SEEG analysis.

    Science.gov (United States)

    Kinié, A; Ndiaye, M; Montois, J J; Jacquelet, Y

    2007-01-01

    This work is focused on the study of the organization of the SEEG signals during epileptic seizures with multi-agent system approach. This approach is based on cooperative mechanisms of auto-organization at the micro level and of emergence of a global function at the macro level. In order to evaluate this approach we propose a distributed collaborative approach for the classification of the interesting signals. This new multi-criteria classification method is able to provide a relevant brain area structures organisation and to bring out epileptogenic networks elements. The method is compared to another classification approach a fuzzy classification and gives better results when applied to SEEG signals.

  3. Towards an accurate and precise determination of the solid-solid transition temperature of enantiotropic systems

    Energy Technology Data Exchange (ETDEWEB)

    Herman, Christelle, E-mail: christelle.herman@ulb.ac.b [Universite Libre de Bruxelles, Transfers, Interfaces and Processes Department, Chemical Engineering Unit, 50 Avenue Franklin D-Roosevelt, CP 165/67, 1050 Bruxelles (Belgium); Leyssens, Tom [Universite Catholique de Louvain, Institute of Condensed Matter and Nanosciences, 1 Place Louis Pasteur, 1348 Louvain-La-Neuve (Belgium); Vermylen, Valerie [UCB Pharma, 60 Allee de la Recherche, 1070 Braine l' Alleud (Belgium); Halloin, Veronique; Haut, Benoit [Universite Libre de Bruxelles, Transfers, Interfaces and Processes Department, Chemical Engineering Unit, 50 Avenue Franklin D-Roosevelt, CP 165/67, 1050 Bruxelles (Belgium)

    2011-05-15

    the second experimental method is a more accurate, precise, time- and effort-friendly method for the determination of T{sub tr}. The solid-solid transition temperature of the Etiracetam system, determined with the second method, using three different solvents, is found to be equal to 303.65 K {+-} 0.5 K.

  4. Initial steps towards an evidence-based classification system for golfers with a physical impairment

    NARCIS (Netherlands)

    Stoter, Inge K.; Hettinga, Florentina J.; Altmann, Viola; Eisma, Wim; Arendzen, Hans; Bennett, Tony; van der Woude, Lucas H.; Dekker, Rienk

    2017-01-01

    Purpose: The present narrative review aims to make a first step towards an evidence-based classification system in handigolf following the International Paralympic Committee (IPC). It intends to create a conceptual framework of classification for handigolf and an agenda for future research. Method:

  5. Initial steps towards an evidence-based classification system for golfers with a physical impairment

    NARCIS (Netherlands)

    Stoter, Inge K.; Hettinga, Florentina J.; Altmann, Viola; Eisma, Wim; Arendzen, Hans; Bennett, Tony; van der Woude, Lucas H.; Dekker, Rienk

    2017-01-01

    Purpose: The present narrative review aims to make a first step towards an evidence-based classification system in handigolf following the International Paralympic Committee (IPC). It intends to create a conceptual framework of classification for handigolf and an agenda for future research. Method:

  6. Improvements to the current classification of salary expenses in the accounting system of the enterprise

    Directory of Open Access Journals (Sweden)

    Fylypenko Anna

    2016-04-01

    Full Text Available The article considers the existing classification of salary expenses in Ukraine. The analysis of the classifications of such costs in management and accounting is carried out. The article suggests approaches for improvement in the cost-accounting system for the respective enterprise features, which greatly facilitates the management of salary expenses and allows the search of reserves to reduce them.

  7. Initial steps towards an evidence-based classification system for golfers with a physical impairment

    NARCIS (Netherlands)

    Stoter, Inge K; Hettinga, Florentina J; Altmann, Viola; Eisma, Wim; Arendzen, Hans; Bennett, Tony; van der Woude, Lucas H; Dekker, Rienk

    2015-01-01

    PURPOSE: The present narrative review aims to make a first step towards an evidence-based classification system in handigolf following the International Paralympic Committee (IPC). It intends to create a conceptual framework of classification for handigolf and an agenda for future research. METHOD:

  8. Using hydrogeomorphic criteria to classify wetlands on Mt. Desert Island, Maine - approach, classification system, and examples

    Science.gov (United States)

    Nielsen, Martha G.; Guntenspergen, Glenn R.; Neckles, Hilary A.

    2005-01-01

    A wetland classification system was designed for Mt. Desert Island, Maine, to help categorize the large number of wetlands (over 1,200 mapped units) as an aid to understanding their hydrologic functions. The classification system, developed by the U.S. Geological Survey (USGS), in cooperation with the National Park Service, uses a modified hydrogeomorphic (HGM) approach, and assigns categories based on position in the landscape, soils and surficial geologic setting, and source of water. A dichotomous key was developed to determine a preliminary HGM classification of wetlands on the island. This key is designed for use with USGS topographic maps and 1:24,000 geographic information system (GIS) coverages as an aid to the classification, but may also be used with field data. Hydrologic data collected from a wetland monitoring study were used to determine whether the preliminary classification of individual wetlands using the HGM approach yielded classes that were consistent with actual hydroperiod data. Preliminary HGM classifications of the 20 wetlands in the monitoring study were consistent with the field hydroperiod data. The modified HGM classification approach appears robust, although the method apparently works somewhat better with undisturbed wetlands than with disturbed wetlands. This wetland classification system could be applied to other hydrogeologically similar areas of northern New England.

  9. 15 CFR 921.3 - National Estuarine Research Reserve System biogeographic classification scheme and estuarine...

    Science.gov (United States)

    2010-01-01

    ... biogeographic classification scheme and estuarine typologies. (a) National Estuarine Research Reserves are... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false National Estuarine Research Reserve System biogeographic classification scheme and estuarine typologies. 921.3 Section 921.3 Commerce...

  10. A system for accurate on-line measurement of total gas consumption or production rates in microbioreactors

    NARCIS (Netherlands)

    van Leeuwen, Michiel; Heijnen, Joseph J.; Gardeniers, Johannes G.E.; Oudshoorn, Arthur; Noorman, Henk; Visser, Jan; van der Wielen, Luuk A.M.; van Gulik, Walter M.

    2009-01-01

    A system has been developed, based on pressure controlled gas pumping, for accurate measurement of total gas consumption or production rates in the nmol/min range, applicable for on-line monitoring of bioconversions in microbioreactors. The system was validated by carrying out a bioconversion with

  11. A system for accurate on-line measurement of total gas consumption or production rates in microbioreactors

    NARCIS (Netherlands)

    Leeuwen, van Michiel; Heijnen, Joseph J.; Gardeniers, Han; Oudshoorn, Arthur; Noorman, Henk; Visser, Jan; Wielen, van der Luuk A.M.; Gulik, van Walter M.

    2009-01-01

    A system has been developed, based on pressure controlled gas pumping, for accurate measurement of total gas consumption or production rates in the nmol/min range, applicable for on-line monitoring of bioconversions in microbioreactors. The system was validated by carrying out a bioconversion with k

  12. Transferring results from NIR-hyperspectral to NIR-multispectral imaging systems: A filter-based simulation applied to the classification of Arabica and Robusta green coffee.

    Science.gov (United States)

    Calvini, Rosalba; Amigo, Jose Manuel; Ulrici, Alessandro

    2017-05-15

    Due to the differences in terms of both price and quality, the availability of effective instrumentation to discriminate between Arabica and Robusta coffee is extremely important. To this aim, the use of multispectral imaging systems could provide reliable and accurate real-time monitoring at relatively low costs. However, in practice the implementation of multispectral imaging systems is not straightforward: the present work investigates this issue, starting from the outcome of variable selection performed using a hyperspectral system. Multispectral data were simulated considering four commercially available filters matching the selected spectral regions, and used to calculate multivariate classification models with Partial Least Squares-Discriminant Analysis (PLS-DA) and sparse PLS-DA. Proper strategies for the definition of the training set and the selection of the most effective combinations of spectral channels led to satisfactory classification performances (100% classification efficiency in prediction of the test set). Copyright © 2017 Elsevier B.V. All rights reserved.

  13. The accurate use of impedance analysis for the study of microbial electrochemical systems.

    Science.gov (United States)

    Dominguez-Benetton, Xochitl; Sevda, Surajbhan; Vanbroekhoven, Karolien; Pant, Deepak

    2012-11-07

    The present critical review aims to portray the principles and theoretical foundations that have been used for the application of electrochemical impedance spectroscopy (EIS) to study electron-transfer mechanisms, mass transfer phenomena and distribution of the heterogeneous properties of microbial electrochemical systems (MXCs). Over the past eight years, the application of this method has allowed major breakthroughs, especially in the field of microbial fuel cells (MFCs); however, it is still most widely extended only to the calculation of internal resistances. The use and interpretation of EIS should greatly improve since the intrinsic knowledge of this field, and efforts and current trends in this field have already allowed its understanding based on rather meaningful physical properties and not only on fitting electrical analogues. From this perspective, the use, analysis and interpretation of EIS applied to the study of MXCs are critically examined. Together with the revision of more than 150 articles directly devoted to this topic, two examples of the correct and improved analysis of EIS data are extensively presented. The first one focuses on the use of graphical methods for improving EIS analysis and the other one concentrates on the elucidation of the constant phase element (CPE) parameters. CPEs have been introduced in equivalent circuit models, sometimes without solid justification or analysis; the effective capacitance has been obtained from CPE parameters, following an unsuitable theory for the case of microbial-electrochemical interfaces. The use of CPE is reviewed in terms of meaningful physical parameters, such as biofilm thickness. The use of a finite-diffusion element is reviewed throughout estimation of accurate values for obtaining the dimensionless numbers, Schmidt and Sherwood, in the context of a dioxygen-reducing-biocathode, under different flow-rate conditions. The use and analysis of EIS in this context are still emerging, but because of

  14. The evolution of classification systems: Ontogeny of the UDC

    CERN Document Server

    Salah, Almila Akdag; Suchecki, Krzysztof; Scharnhorst, Andrea; Smiraglia, Richard P

    2012-01-01

    To classify is to put things in meaningful groups, but the criteria for doing so can be problematic. Study of evolution of classification includes ontogenetic analysis of change in classification over time. We present an empirical analysis of the UDC over the entire period of its development. We demonstrate stability in main classes, with major change driven by 20th century scientific developments. But we also demonstrate a vast increase in the complexity of auxiliaries. This study illustrates an alternative to Tennis' "scheme-versioning" method.

  15. How Bibliographic Classification Mirrors Society - the Case of the Swedish SAB-System

    Directory of Open Access Journals (Sweden)

    Joacim Hansson

    2006-01-01

    Full Text Available The article reports on a study of the Swedish Classification system, the SAB-system and its ability to reveal certain social and ideological structures in Swedish society in the beginning of the 20th century. Methodology is based on critical hermeneutics and ideological analysis. Results show that the classification system shows significant correspondences between the structure of its disciplinary hierarchies and ideals in the surrounding society.

  16. Serologic biomarkers of Epstein-Barr virus correlate with TNM classification according to the seventh edition of the UICC/AJCC staging system for nasopharyngeal carcinoma.

    Science.gov (United States)

    Sun, Peng; Chen, Cui; Cheng, Yi-Kan; Zeng, Zhi-Jian; Chen, Xin-Lin; Liu, Li-Zhi; Gu, Mo-Fa

    2014-09-01

    This study aimed to investigate the association between Epstein-Barr virus (EBV)-related biomarkers and TNM classification according to the seventh edition of AJCC/UICC staging system for nasopharyngeal carcinoma. Serum VCA-IgA and EA-IgA titers and plasma EBV-DNA load were quantified at baseline in 779 patients; the rates of positivity and titers/load were compared by TNM classification. The VCA-IgA-positive rate was significantly associated with advanced N classification and stage; the EA-IgA-positive rate with advanced T and N classifications and stage; the EBV-DNA-positive rate with advanced T, N and M classifications and stage. The percentage of triple-positive patients was higher in patients with advanced TNM classification. The VCA-IgA titer and EA-IgA titer correlated positively with T classification, N classification and disease stage (1:117 in Stage I, 1:188.4 in Stage II, 1:231.12 in Stage III, 1:265.91 in Stage IV, and 1:18.34 in Stage I, 1:32.11 in Stage II, 1:34.77 in Stage III, 1:37.65 in Stage IV, respectively). EBV DNA load correlated positively with T, N and M classification and stage [median lg (EBV DNA): 0 (IQ range 0-1.85) in Stage I, 1.32 (0-3.51) in Stage II, 3.33 (0-4.30) in Stage III, 3.83 (2.85-4.71) in Stage IV]. Serum VCA-IgA/EA-IgA titers and plasma EBV DNA correlated strongly with TNM classification according to the seventh edition of the AJCC/UICC; however, plasma EBV DNA load could accurately predict metastatic disease. EBV serological biomarkers may enhance the accuracy of TNM staging and help to avoid excessive imaging examinations in routine evaluation.

  17. Building Accurate 3D Spatial Networks to Enable Next Generation Intelligent Transportation Systems

    DEFF Research Database (Denmark)

    Kaul, Manohar; Yang, Bin; Jensen, Christian S.

    2013-01-01

    model with elevation information extracted from massive aerial laser scan data and thus yields an accurate 3D model. We present a filtering technique that is capable of pruning irrelevant laser scan points in a single pass, but assumes that the 2D network fits in internal memory and that the points......The use of accurate 3D spatial network models can enable substantial improvements in vehicle routing. Notably, such models enable eco-routing, which reduces the environmental impact of transportation. We propose a novel filtering and lifting framework that augments a standard 2D spatial network...

  18. CLASSIFICATION OF SYSTEMS FOR PASSIVE AFTERHEAT REMOVAL FROM REACTOR CONTAINMENT OF NUCLEAR POWER PLANT WITH WATER-COOLED POWER REACTOR

    Directory of Open Access Journals (Sweden)

    N. Khaled

    2014-01-01

    Full Text Available A classification on systems for passive afterheat removal from reactor containment has been developed in the paper.  The classification permits to make a detailed analysis of various concepts pertaining to systems for passive afterheat removal from reactor containment of new generation. The paper considers main classification features of the given systems.

  19. The periodontal disease classification system of the American Academy of Periodontology--an update.

    Science.gov (United States)

    Wiebe, C B; Putnins, E E

    2000-12-01

    Until recently, the accepted standard for the classification of periodontal diseases was the one agreed upon at the 1989 World Workshop in Clinical Periodontics. This classification system, however, had its weaknesses. In particular, some criteria for diagnosis were unclear, disease categories overlapped, and patients did not always fit into any one category. Also, too much emphasis was placed on the age of disease onset and rate of progression, which are often difficult to determine. Finally, no classification for diseases limited to the gingiva existed. In 1999, an International Workshop for a Classification of Periodontal Diseases and Conditions was organized by the American Academy of Periodontology to address these concerns and to revise the classification system. The workshop proceedings have been published in the Annals of Periodontology. The major changes to the 1989 proceedings and the rationale for these changes are summarized here. In addition, the potential impact of these changes is discussed.

  20. 關於圖書分類法的修訂 Concerning the Revision of Classification System

    Directory of Open Access Journals (Sweden)

    Ho-chin Chen

    1999-03-01

    Full Text Available 無For reviewing a classification scheme, we usually look in much detail at its traditional features such as detailed schedules, hospital notation, a supportive index and its adaptability. Yet another desirable feature, a good and financially secure revision programme, is a key point to the success of classification scheme. The author traces the history of revision processes of three successful classification systems (Dewey Decimal Classification, Library of Congress Classification and Universal Decimal Classification , and attempt to recommend the better revision mechanism for Lai's New Classification Scheme for Chinese Libraries ( 中國 圖書分類法in Taiwan

  1. HYBRID INTERNET TRAFFIC CLASSIFICATION TECHNIQUE1

    Institute of Scientific and Technical Information of China (English)

    Li Jun; Zhang Shunyi; Lu Yanqing; Yan Junrong

    2009-01-01

    Accurate and real-time classification of network traffic is significant to network operation and management such as QoS differentiation, traffic shaping and security surveillance. However, with many newly emerged P2P applications using dynamic port numbers, masquerading techniques, and payload encryption to avoid detection, traditional classification approaches turn to be ineffective. In this paper, we present a layered hybrid system to classify current Internet traffic, motivated by variety of network activities and their requirements of traffic classification. The proposed method could achieve fast and accurate traffic classification with low overheads and robustness to accommodate both known and unknown/encrypted applications. Furthermore, it is feasible to be used in the context of real-time traffic classification. Our experimental results show the distinct advantages of the proposed classification system, compared with the one-step Machine Learning (ML) approach.

  2. Classification Systems, their Digitization and Consequences for Data-Driven Decision Making

    DEFF Research Database (Denmark)

    Stein, Mari-Klara; Newell, Sue; Galliers, Robert D.

    2013-01-01

    of such information systems. Based on a multi-site field study, we suggest that representational quality is achieved through four types of negotiations that human actors engage in when confronted with the materiality of a new IS. These negotiations are associated with three broad practices (instantiation, re......Classification systems are foundational in many standardized software tools. This digitization of classification systems gives them a new ‘materiality’ that, jointly with the social practices of information producers/consumers, has significant consequences on the representational quality......-narration and meta-narration), and three different information production/consumption situations. We contribute to the relational theorization of representational quality and extend classification systems research by drawing explicit attention to the importance of ‘materialization’ of classification systems...

  3. Classification Systems, their Digitization and Consequences for Data-Driven Decision Making

    DEFF Research Database (Denmark)

    Stein, Mari-Klara; Newell, Sue; Galliers, Robert D.

    2013-01-01

    Classification systems are foundational in many standardized software tools. This digitization of classification systems gives them a new ‘materiality’ that, jointly with the social practices of information producers/consumers, has significant consequences on the representational quality...... of such information systems. Based on a multi-site field study, we suggest that representational quality is achieved through four types of negotiations that human actors engage in when confronted with the materiality of a new IS. These negotiations are associated with three broad practices (instantiation, re......-narration and meta-narration), and three different information production/consumption situations. We contribute to the relational theorization of representational quality and extend classification systems research by drawing explicit attention to the importance of ‘materialization’ of classification systems...

  4. Classification System for English Language Learners: Issues and Recommendations

    Science.gov (United States)

    Abedi, Jamal

    2008-01-01

    High-stakes decisions for the instruction and assessment of English language learner (ELL) students are made based on the premise that ELL classification is a valid dichotomy that distinguishes between those who are proficient in the use of the English language and those who are not. However, recent research findings draw a vague picture of the…

  5. Application of Interactive Classification System in University Study Course Comparison

    Science.gov (United States)

    Birzniece, Ilze; Rudzajs, Peteris; Kalibatiene, Diana; Vasilecas, Olegas; Rencis, Edgars

    2015-01-01

    The growing amount of information in the world has increased the need for computerized classification of different objects. This situation is present in higher education as well where the possibility of effortless detection of similarity between different study courses would give the opportunity to organize student exchange programmes effectively…

  6. Toward a common classification approach for biorefinery systems

    DEFF Research Database (Denmark)

    Cherubini, Francesco; Jungmeier, Gerfried; Wellisch, Maria

    2009-01-01

    until 2020 is based on their characteristics to be mixed with gasoline, diesel and natural gas, reflecting the main advantage of using the already-existing infrastructure for easier market introduction. This classification approach relies on four main features: (1) platforms; (2) products; (3) feedstock...

  7. Target Classification for the Installation Security Radar System

    Science.gov (United States)

    1981-11-01

    NUMBER 2. GOVT ACCESSION No. 3. RECIPIENT’S CATALOG NUMBER 4. TITLE (and Subtitle) 5. TYPE OF REPORT & PERIOD COVERED Target Classification for the...INSECTS MEASURED != .,EE FLIGHT (ref 10) L-band radarInsect target cross section (dBsm) Wingless Hawkmoth -60 Honeybee -63 Dragonfly -67 Since no studies

  8. Meta-language for land use classification systems

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2014-04-01

    Full Text Available This presentation provides an overview of a meta-language for land use classification. It also explains why land use can’t always be determined from imagery, and why land use is not the same as land cover, zoning or planning - though...

  9. Near Earth Asteroids: A Classification System According to Their Shapes

    Science.gov (United States)

    Acevedo, R. D.; Rocca, M.; Rabassa, J.; Ponce, J. F.; Stinco, S.

    2012-09-01

    A new way to classify Near Earth Asteroids (NEAs) according to their shapes is proposed. This classification is based on the asteroid roundness and sphericity in the same way that it is used in geological sciences to describe clasts in mechanical sedimentary rocks.

  10. Building Accurate 3D Spatial Networks to Enable Next Generation Intelligent Transportation Systems

    DEFF Research Database (Denmark)

    Kaul, Manohar; Yang, Bin; Jensen, Christian S.

    2013-01-01

    The use of accurate 3D spatial network models can enable substantial improvements in vehicle routing. Notably, such models enable eco-routing, which reduces the environmental impact of transportation. We propose a novel filtering and lifting framework that augments a standard 2D spatial network...

  11. Accurate determination of process variables in a solid-state fermentation system

    NARCIS (Netherlands)

    Smits, J.P.; Rinzema, A.; Tramper, J.; Schlösser, E.E.; Knol, W.

    1996-01-01

    The solid-state fermentation (SSF) method described enabled accurate determination of variables related to biological activity. Growth, respiratory activity and production of carboxymethyl-cellulose-hydrolysing enzyme (CMC-ase) activity by Trichoderma reesei QM9414 on wheat bran was used as a model

  12. Improved Ecosystem Predictions of the California Current System via Accurate Light Calculations

    Science.gov (United States)

    2011-09-30

    absorption , scatter, and backscatter coefficients) effects. However, once an accurate value of the scalar irradiance Eo(z,λ) has been computed to... photosynthesis . It is possible to compute PAR to the bottom of the euphotic zone in a fraction of a second of computer time, with errors of no more than a few

  13. Combining multiple hypothesis testing and affinity propagation clustering leads to accurate, robust and sample size independent classification on gene expression data

    Directory of Open Access Journals (Sweden)

    Sakellariou Argiris

    2012-10-01

    Full Text Available Abstract Background A feature selection method in microarray gene expression data should be independent of platform, disease and dataset size. Our hypothesis is that among the statistically significant ranked genes in a gene list, there should be clusters of genes that share similar biological functions related to the investigated disease. Thus, instead of keeping N top ranked genes, it would be more appropriate to define and keep a number of gene cluster exemplars. Results We propose a hybrid FS method (mAP-KL, which combines multiple hypothesis testing and affinity propagation (AP-clustering algorithm along with the Krzanowski & Lai cluster quality index, to select a small yet informative subset of genes. We applied mAP-KL on real microarray data, as well as on simulated data, and compared its performance against 13 other feature selection approaches. Across a variety of diseases and number of samples, mAP-KL presents competitive classification results, particularly in neuromuscular diseases, where its overall AUC score was 0.91. Furthermore, mAP-KL generates concise yet biologically relevant and informative N-gene expression signatures, which can serve as a valuable tool for diagnostic and prognostic purposes, as well as a source of potential disease biomarkers in a broad range of diseases. Conclusions mAP-KL is a data-driven and classifier-independent hybrid feature selection method, which applies to any disease classification problem based on microarray data, regardless of the available samples. Combining multiple hypothesis testing and AP leads to subsets of genes, which classify unknown samples from both, small and large patient cohorts with high accuracy.

  14. Non-Linear Dynamical Classification of Short Time Series of the Rössler System in High Noise Regimes

    Science.gov (United States)

    Lainscsek, Claudia; Weyhenmeyer, Jonathan; Hernandez, Manuel E.; Poizner, Howard; Sejnowski, Terrence J.

    2013-01-01

    Time series analysis with delay differential equations (DDEs) reveals non-linear properties of the underlying dynamical system and can serve as a non-linear time-domain classification tool. Here global DDE models were used to analyze short segments of simulated time series from a known dynamical system, the Rössler system, in high noise regimes. In a companion paper, we apply the DDE model developed here to classify short segments of encephalographic (EEG) data recorded from patients with Parkinson’s disease and healthy subjects. Nine simulated subjects in each of two distinct classes were generated by varying the bifurcation parameter b and keeping the other two parameters (a and c) of the Rössler system fixed. All choices of b were in the chaotic parameter range. We diluted the simulated data using white noise ranging from 10 to −30 dB signal-to-noise ratios (SNR). Structure selection was supervised by selecting the number of terms, delays, and order of non-linearity of the model DDE model that best linearly separated the two classes of data. The distances d from the linear dividing hyperplane was then used to assess the classification performance by computing the area A′ under the ROC curve. The selected model was tested on untrained data using repeated random sub-sampling validation. DDEs were able to accurately distinguish the two dynamical conditions, and moreover, to quantify the changes in the dynamics. There was a significant correlation between the dynamical bifurcation parameter b of the simulated data and the classification parameter d from our analysis. This correlation still held for new simulated subjects with new dynamical parameters selected from each of the two dynamical regimes. Furthermore, the correlation was robust to added noise, being significant even when the noise was greater than the signal. We conclude that DDE models may be used as a generalizable and reliable classification tool for even small segments of noisy data. PMID

  15. Non-linear Dynamical Classification of Short Time Series of the Rössler System in High Noise Regimes

    Directory of Open Access Journals (Sweden)

    Claudia eLainscsek

    2013-11-01

    Full Text Available Time series analysis with delay differential equations (DDEs reveals nonlinear properties of the underlying dynamical system and can serve as a non-linear time-domain classification tool. Here global DDE models were used to analyze short segments of simulated time series from a known dynamical system, the Rössler system, in high noise regimes. In a companion paper, we apply the DDE model developed here to classify short segments of encephalographic (EEG data recorded from patients with Parkinson's disease and healthy subjects. Nine simulated subjects in each of two distinct classes were generated by varying the bifurcation parameter b and keeping the other two parameters (a and c of the Rössler system fixed. All choices of b were in the chaotic parameter range. We diluted the simulated data using white noise ranging from 10dB to -30dB signal-to-noise ratios (SNR. Structure selection was supervised by selecting the number of terms, delays, and order of nonlinearity of the model DDE model that best linearly separated the two classes of data. The distances d from the linear dividing hyperplane was then used to assess the classification performance by computing the area A' under the ROC curve. The selected model was tested on untrained data using repeated random sub-sampling validation. DDEs were able to accurately distinguish the two dynamical conditions, and moreover, to quantify the changes in the dynamics. There was a significant correlation between the dynamical bifurcation parameter b of the simulated data and the classification parameter d from our analysis. This correlation still held for new simulated subjects with new dynamical parameters selected from each of the two dynamical regimes. Furthermore, the correlation was robust to added noise, being significant even when the noise was greater than the signal. We conclude that DDE models may be used as a generalizable and reliable classification tool for even small segments of noisy data.

  16. Central nervous system involvement in systemic lupus erythematosus: Overview on classification criteria.

    Science.gov (United States)

    Sciascia, Savino; Bertolaccini, Maria Laura; Baldovino, Simone; Roccatello, Dario; Khamashta, Munther A; Sanna, Giovanni

    2013-01-01

    Central nervous system (CNS) involvement is one of the major causes of morbidity and mortality in systemic lupus erythematosus (SLE) patients. Clinical manifestations can involve both the central and peripheral nervous systems, and they must be differentiated from infections, metabolic complications, and drug-induced toxicity. Recognition and treatment of CNS involvement continues to represent a major diagnostic challenge. In this Review, we sought to summarise the current insights on the various aspects of neuropsychiatric SLE with special emphasis on the terminology and classification criteria needed to correctly attribute the particular event to SLE.

  17. On the Implementation of a Land Cover Classification System for SAR Images Using Khoros

    Science.gov (United States)

    Medina Revera, Edwin J.; Espinosa, Ramon Vasquez

    1997-01-01

    The Synthetic Aperture Radar (SAR) sensor is widely used to record data about the ground under all atmospheric conditions. The SAR acquired images have very good resolution which necessitates the development of a classification system that process the SAR images to extract useful information for different applications. In this work, a complete system for the land cover classification was designed and programmed using the Khoros, a data flow visual language environment, taking full advantages of the polymorphic data services that it provides. Image analysis was applied to SAR images to improve and automate the processes of recognition and classification of the different regions like mountains and lakes. Both unsupervised and supervised classification utilities were used. The unsupervised classification routines included the use of several Classification/Clustering algorithms like the K-means, ISO2, Weighted Minimum Distance, and the Localized Receptive Field (LRF) training/classifier. Different texture analysis approaches such as Invariant Moments, Fractal Dimension and Second Order statistics were implemented for supervised classification of the images. The results and conclusions for SAR image classification using the various unsupervised and supervised procedures are presented based on their accuracy and performance.

  18. Overview of Four Functional Classification Systems Commonly Used in Cerebral Palsy

    Directory of Open Access Journals (Sweden)

    Andrea Paulson

    2017-04-01

    Full Text Available Cerebral palsy (CP is the most common physical disability in childhood. CP comprises a heterogeneous group of disorders that can result in spasticity, dystonia, muscle contractures, weakness and coordination difficulty that ultimately affects the ability to control movements. Traditionally, CP has been classified using a combination of the motor type and the topographical distribution, as well as subjective severity level. Imprecise terms such as these tell very little about what a person is able to do functionally and can impair clear communication between providers. More recently, classification systems have been created employing a simple ordinal grading system of functional performance. These systems allow a more precise discussion between providers, as well as better subject stratification for research. The goal of this review is to describe four common functional classification systems for cerebral palsy: the Gross Motor Function Classification System (GMFCS, the Manual Ability Classification System (MACS, the Communication Function Classification System (CFCS, and the Eating and Drinking Ability Classification System (EDACS. These measures are all standardized, reliable, and complementary to one another.

  19. A Model for Classification Secondary School Student Enrollment Approval Based on E-Learning Management System and E-Games

    Directory of Open Access Journals (Sweden)

    Hany Mohamed El-katary

    2016-02-01

    Full Text Available Student is the key of the educational process, where students’ creativity and interactions are strongly encouraged. There are many tools embedded in Learning Management Systems (LMS that considered as a goal evaluation of learners. A problem that currently appeared is that assessment process is not always fair or accurate in classifying students according to accumulated knowledge. Therefore, there is a need to apply a new model for better decision making for students’ enrollment and assessments. The proposed model may run along with an assessment tool within a LMS. The proposed model performs analysis and obtains knowledge regarding the classification capability of the assessment process. It offers knowledge for course managers regarding the course materials, quizzes, activities and e-games. The proposed model is an accurate assessment tool and thus better classification among learners. The proposed model was developed for learning management systems, which are commonly used in e-learning in Egyptian language schools. The proposed model demonstrated good accuracy compared to real sample data (250 students.

  20. Classification of distal radius physeal fractures not included in the salter-harris system.

    Science.gov (United States)

    Sferopoulos, Nikolaos K

    2014-01-01

    The most commonly used classification for pediatric physeal fractures has been proposed by Salter and Harris. Among the most suitable classification schemes are those proposed by Ogden and Peterson who added several new types of injuries. The purpose of this study was to examine the value of both schemes to classify all different types of physeal injuries of the distal radius that are not included in the Salter-Harris system and to test a new nomenclature to classify and guide treatment for the whole spectrum of these injuries. A total of 292 children who were admitted for a physeal fracture of the distal radius that could not be classified according to the Salter-Harris system were identified from the hospital database. All radiographs were carefully examined and classified according to the existing classifications of Ogden and Peterson and a modified classification scheme. The results of the treatment were also evaluated. Ninety-six physeal injuries could not be classified using the classification schemes of Ogden and Peterson. All injuries could be classified in five types using the new, modified nomenclature. Growth abnormalities of the distal radius were evaluated after an average follow-up time of 11 years. Growth arrest due to a physeal bar was detected only in one patient. The proposed modified scheme is practical, incorporates all previous classification systems, allows classification of all physeal injuries of the distal radius that are not included in the Salter-Harris system and may assist comparison of treatment outcomes.

  1. Methodological levels of abductive logic and its application in analyzing knowledge classification systems

    Directory of Open Access Journals (Sweden)

    Mohammad Khandan

    2015-05-01

    Originality/Value: Introduces methodological levels of abductive logic and provides LIS professionals with a new and alternative way for analyzing knowledge classification systems as interpretative and semantic social constructions.

  2. EULAR points to consider in the development of classification and diagnostic criteria in systemic vasculitis

    DEFF Research Database (Denmark)

    Basu, Neil; Watts, Richard; Bajema, Ingeborg;

    2010-01-01

    The systemic vasculitides are multiorgan diseases where early diagnosis and treatment can significantly improve outcomes. Robust nomenclature reduces diagnostic delay. However, key aspects of current nomenclature are widely perceived to be out of date, these include disease definitions, classific...

  3. Integrated classification of inflammatory myopathies.

    Science.gov (United States)

    Allenbach, Y; Benveniste, O; Goebel, H-H; Stenzel, W

    2017-02-01

    Inflammatory myopathies comprise a multitude of diverse diseases, most often occurring in complex clinical settings. To ensure accurate diagnosis, multidisciplinary expertise is required. Here, we propose a comprehensive myositis classification that incorporates clinical, morphological and molecular data as well as autoantibody profile. This review focuses on recent advances in myositis research, in particular, the correlation between autoantibodies and morphological or clinical phenotypes that can be used as the basis for an 'integrated' classification system.

  4. Highly accurate wavefunctions for two-electron systems using two parameteres

    CERN Document Server

    Chauhan, Rabeet Singh

    2015-01-01

    It is shown for two electron atoms that ground-state wavefunctions of the form $\\Psi(\\vec{r_{1}}, \\vec{r_{2}})=\\phi(\\vec{r_{1}})\\phi(\\vec{r_{2}})(\\cosh ar_{1}+\\cosh ar_{2})(1+0.5 r_{12}e^{-b r_{12}})$ where $\\vec{r_{1}}$ and $\\vec{r_{2}}$ are the coordinates of two electrons and $r_{12}=|\\vec{r_{1}}-\\vec{r_{2}}|$, can be made highly accurate by optimizing $a$, $b$ and $\\phi$. This is done by solving a variationally derived equation for $\\phi$ for a given $a$ and $b$ and finding $a$ and $b$ so that the expectation value of the Hamiltonian is minimum. For the set $\\{a, b, \\phi\\}$ the values for various quantities obtained from the above wavefunction are compared with those given by $204$-parameter wavefunction of Koga et al. and are found to be matching quite accurately(within ppm) with them.

  5. Accurate Hartree-Fock energy of extended systems using large Gaussian basis sets

    Science.gov (United States)

    Paier, Joachim; Diaconu, Cristian V.; Scuseria, Gustavo E.; Guidon, Manuel; Vandevondele, Joost; Hutter, Jürg

    2009-11-01

    Calculating highly accurate thermochemical properties of condensed matter via wave-function-based approaches (such as, e.g., Hartree-Fock or hybrid functionals) has recently attracted much interest. We here present two strategies providing accurate Hartree-Fock energies for solid LiH in a large Gaussian basis set and applying periodic boundary conditions. The total energies were obtained using two different approaches, namely, a supercell evaluation of Hartree-Fock exchange using a truncated Coulomb operator and an extrapolation toward the full-range Hartree-Fock limit of a Padé fit to a series of short-range screened Hartree-Fock calculations. These two techniques agreed to significant precision. We also present the Hartree-Fock cohesive energy of LiH (converged to within sub-millielectron volt) at the experimental equilibrium volume as well as the Hartree-Fock equilibrium lattice constant and bulk modulus.

  6. EULAR points to consider in the development of classification and diagnostic criteria in systemic vasculitis

    DEFF Research Database (Denmark)

    Basu, Neil; Watts, Richard; Bajema, Ingeborg;

    2010-01-01

    The systemic vasculitides are multiorgan diseases where early diagnosis and treatment can significantly improve outcomes. Robust nomenclature reduces diagnostic delay. However, key aspects of current nomenclature are widely perceived to be out of date, these include disease definitions, classific......, classification and diagnostic criteria. Therefore, the aim of the present work was to identify deficiencies and provide contemporary points to consider for the development of future definitions and criteria in systemic vasculitis....

  7. Introduction of the gross motor function classification system in Venezuela - a model for knowledge dissemination

    OpenAIRE

    Löwing, Kristina; Arredondo, Ynes C.; Tedroff, Marika; Tedroff, Kristina

    2015-01-01

    Background A current worldwide common goal is to optimize the health and well-being of children with cerebral palsy (CP). In order to reach that goal, for this heterogeneous group, a common language and classification systems are required to predict development and offer evidence based interventions. In most countries in Africa, South America, Asia and Eastern Europe the classification systems for CP are unfamiliar and rarely used. Education and implementation are required. The specific aims ...

  8. Establishment and application of medication error classification standards in nursing care based on the International Classification of Patient Safety

    Directory of Open Access Journals (Sweden)

    Xiao-Ping Zhu

    2014-09-01

    Conclusion: Application of this classification system will help nursing administrators to accurately detect system- and process-related defects leading to medication errors, and enable the factors to be targeted to improve the level of patient safety management.

  9. An accurate air temperature measurement system based on an envelope pulsed ultrasonic time-of-flight technique.

    Science.gov (United States)

    Huang, Y S; Huang, Y P; Huang, K N; Young, M S

    2007-11-01

    A new microcomputer based air temperature measurement system is presented. An accurate temperature measurement is derived from the measurement of sound velocity by using an ultrasonic time-of-flight (TOF) technique. The study proposes a novel algorithm that combines both amplitude modulation (AM) and phase modulation (PM) to get the TOF measurement. The proposed system uses the AM and PM envelope square waveform (APESW) to reduce the error caused by inertia delay. The APESW ultrasonic driving waveform causes an envelope zero and phase inversion phenomenon in the relative waveform of the receiver. To accurately achieve a TOF measurement, the phase inversion phenomenon was used to sufficiently identify the measurement pulse in the received waveform. Additionally, a counter clock technique was combined to compute the phase shifts of the last incomplete cycle for TOF. The presented system can obtain 0.1% TOF resolution for the period corresponding to the 40 kHz frequency ultrasonic wave. Consequently, with the integration of a humidity compensation algorithm, a highly accurate and high resolution temperature measurement can be achieved using the accurate TOF measurement. Experimental results indicate that the combined standard uncertainty of the temperature measurement is approximately 0.39 degrees C. The main advantages of this system are high resolution measurements, narrow bandwidth requirements, and ease of implementation.

  10. Accurate age classification of 6 and 12 month-old infants based on resting-state functional connectivity magnetic resonance imaging data.

    Science.gov (United States)

    Pruett, John R; Kandala, Sridhar; Hoertel, Sarah; Snyder, Abraham Z; Elison, Jed T; Nishino, Tomoyuki; Feczko, Eric; Dosenbach, Nico U F; Nardos, Binyam; Power, Jonathan D; Adeyemo, Babatunde; Botteron, Kelly N; McKinstry, Robert C; Evans, Alan C; Hazlett, Heather C; Dager, Stephen R; Paterson, Sarah; Schultz, Robert T; Collins, D Louis; Fonov, Vladimir S; Styner, Martin; Gerig, Guido; Das, Samir; Kostopoulos, Penelope; Constantino, John N; Estes, Annette M; Petersen, Steven E; Schlaggar, Bradley L; Piven, Joseph

    2015-04-01

    Human large-scale functional brain networks are hypothesized to undergo significant changes over development. Little is known about these functional architectural changes, particularly during the second half of the first year of life. We used multivariate pattern classification of resting-state functional connectivity magnetic resonance imaging (fcMRI) data obtained in an on-going, multi-site, longitudinal study of brain and behavioral development to explore whether fcMRI data contained information sufficient to classify infant age. Analyses carefully account for the effects of fcMRI motion artifact. Support vector machines (SVMs) classified 6 versus 12 month-old infants (128 datasets) above chance based on fcMRI data alone. Results demonstrate significant changes in measures of brain functional organization that coincide with a special period of dramatic change in infant motor, cognitive, and social development. Explorations of the most different correlations used for SVM lead to two different interpretations about functional connections that support 6 versus 12-month age categorization. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  11. Accurate age classification of 6 and 12 month-old infants based on resting-state functional connectivity magnetic resonance imaging data

    Directory of Open Access Journals (Sweden)

    John R. Pruett, Jr.

    2015-04-01

    Full Text Available Human large-scale functional brain networks are hypothesized to undergo significant changes over development. Little is known about these functional architectural changes, particularly during the second half of the first year of life. We used multivariate pattern classification of resting-state functional connectivity magnetic resonance imaging (fcMRI data obtained in an on-going, multi-site, longitudinal study of brain and behavioral development to explore whether fcMRI data contained information sufficient to classify infant age. Analyses carefully account for the effects of fcMRI motion artifact. Support vector machines (SVMs classified 6 versus 12 month-old infants (128 datasets above chance based on fcMRI data alone. Results demonstrate significant changes in measures of brain functional organization that coincide with a special period of dramatic change in infant motor, cognitive, and social development. Explorations of the most different correlations used for SVM lead to two different interpretations about functional connections that support 6 versus 12-month age categorization.

  12. Natural fracture systems on planetary surfaces: Genetic classification and pattern randomness

    Science.gov (United States)

    Rossbacher, Lisa A.

    1987-01-01

    One method for classifying natural fracture systems is by fracture genesis. This approach involves the physics of the formation process, and it has been used most frequently in attempts to predict subsurface fractures and petroleum reservoir productivity. This classification system can also be applied to larger fracture systems on any planetary surface. One problem in applying this classification system to planetary surfaces is that it was developed for ralatively small-scale fractures that would influence porosity, particularly as observed in a core sample. Planetary studies also require consideration of large-scale fractures. Nevertheless, this system offers some valuable perspectives on fracture systems of any size.

  13. Reliability of the Multidimensional Pain Inventory and stability of the MPI classification system in chronic back pain

    NARCIS (Netherlands)

    Verra, M.L.; Angst, F.; Staal, J.B.; Brioschi, R.; Lehmann, S.; Aeschlimann, A.; Bie, R.A. de

    2012-01-01

    ABSTRACT: BACKGROUND: This cross validation study examined the reliability of the Multidimensional Pain Inventory (MPI) and the stability of the Multidimensional Pain Inventory Classification System of the empirically derived subgroup classification obtained by cluster analysis in chronic musculoske

  14. Exposure assessment within a Total Diet Study: a comparison of the use of the pan-European classification system FoodEx-1 with national food classification systems.

    Science.gov (United States)

    Akhandaf, Y; Van Klaveren, J; De Henauw, S; Van Donkersgoed, G; Van Gorcum, T; Papadopoulos, A; Sirot, V; Kennedy, M; Pinchen, H; Ruprich, J; Rehurkova, I; Perelló, G; Sioen, I

    2015-04-01

    A Total Diet Study (TDS) consists of selecting, collecting and preparing commonly consumed foods purchased at retail level and analysing them for harmful and/or beneficial chemical substances. A food classification system is needed to link food consumption data with the contaminant concentration data obtained in the TDS for the exposure assessment. In this study a comparison was made between the use of a national food classification systems and the use of FoodEx-1, developed and recommended by the European Food Safety Authority (EFSA). The work was performed using data of six European countries: Belgium, Czech Republic, France, The Netherlands, Spain and the UK. For each population, exposure to contaminant A (organic compounds) and/or contaminant B (inorganic compound) was assessed by the Monte Carlo Risk Assessment (MCRA) software using the national classification system and FoodEx-1 for food consumption data and for TDS laboratory results. Minimal differences between both approaches were observed. This observation applied for both contaminant A and contaminant B. In general risk assessment will be similar for both approaches; however, this is not guaranteed. FoodEx-1 proved to be a valuable hierarchic classification system in order to harmonise exposure assessment based on existing TDS results throughout Europe.

  15. MRI classification system (MRICS) for children with cerebral palsy: development, reliability, and recommendations.

    Science.gov (United States)

    Himmelmann, Kate; Horber, Veronka; De La Cruz, Javier; Horridge, Karen; Mejaski-Bosnjak, Vlatka; Hollody, Katalin; Krägeloh-Mann, Ingeborg

    2017-01-01

    To develop and evaluate a classification system for magnetic resonance imaging (MRI) findings of children with cerebral palsy (CP) that can be used in CP registers. The classification system was based on pathogenic patterns occurring in different periods of brain development. The MRI classification system (MRICS) consists of five main groups: maldevelopments, predominant white matter injury, predominant grey matter injury, miscellaneous, and normal findings. A detailed manual for the descriptions of these patterns was developed, including test cases (www.scpenetwork.eu/en/my-scpe/rtm/neuroimaging/cp-neuroimaging/). A literature review was performed and MRICS was compared with other classification systems. An exercise was carried out to check applicability and interrater reliability. Professionals working with children with CP or in CP registers were invited to participate in the exercise and chose to classify either 18 MRIs or MRI reports of children with CP. Classification systems in the literature were compatible with MRICS and harmonization possible. Interrater reliability was found to be good overall (k=0.69; 0.54-0.82) among the 41 participants and very good (k=0.81; 0.74-0.92) using the classification based on imaging reports. Surveillance of Cerebral Palsy in Europe (SCPE) proposes the MRICS as a reliable tool. Together with its manual it is simple to apply for CP registers. © 2016 Mac Keith Press.

  16. A new classification code is available in the Danish health-care classification system for patients with symptoms related to chemicals and scents

    DEFF Research Database (Denmark)

    Elberling, Jesper; Bonde, Jens Peter Ellekilde; Vesterhauge, Søren;

    2014-01-01

    From July 2012, a classification code for multiple chemical sensitivity has been available in the Danish healthcare classification system. The overall purpose is to register hospital contacts in Denmark. The diagnostic code is labelled "Symptoms related to chemicals and scents", DR688A1, and clas......, and classified as a subcategory to "Medically unexplained symptoms", DR688A, which is a specialization of the ICD-10 code "R68.8 Other specified general symptoms and signs". The classification was decided with reference to the present lack of scientific understanding.......From July 2012, a classification code for multiple chemical sensitivity has been available in the Danish healthcare classification system. The overall purpose is to register hospital contacts in Denmark. The diagnostic code is labelled "Symptoms related to chemicals and scents", DR688A1...

  17. A Generalized Subspace Least Mean Square Method for High-resolution Accurate Estimation of Power System Oscillation Modes

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Peng; Zhou, Ning; Abdollahi, Ali

    2013-09-10

    A Generalized Subspace-Least Mean Square (GSLMS) method is presented for accurate and robust estimation of oscillation modes from exponentially damped power system signals. The method is based on orthogonality of signal and noise eigenvectors of the signal autocorrelation matrix. Performance of the proposed method is evaluated using Monte Carlo simulation and compared with Prony method. Test results show that the GSLMS is highly resilient to noise and significantly dominates Prony method in tracking power system modes under noisy environments.

  18. Accurate Maximum Power Tracking in Photovoltaic Systems Affected by Partial Shading

    Directory of Open Access Journals (Sweden)

    Pierluigi Guerriero

    2015-01-01

    Full Text Available A maximum power tracking algorithm exploiting operating point information gained on individual solar panels is presented. The proposed algorithm recognizes the presence of multiple local maxima in the power voltage curve of a shaded solar field and evaluates the coordinated of the absolute maximum. The effectiveness of the proposed approach is evidenced by means of circuit level simulation and experimental results. Experiments evidenced that, in comparison with a standard perturb and observe algorithm, we achieve faster convergence in normal operating conditions (when the solar field is uniformly illuminated and we accurately locate the absolute maximum power point in partial shading conditions, thus avoiding the convergence on local maxima.

  19. Fast and Accurate Non-destructive Testing System for Inspection of Canning Tubes

    DEFF Research Database (Denmark)

    Gundtoft, Hans Erik; Nielsen, E.

    1973-01-01

    The authors describe the development of an inspection bench for the non-destructive examination of canning tubes. The bench is original in that the internal diameter is calculated from exact measurement of the outer diameter and the wall thickness. The transducers for inspection and control...... are rotated around the tube. Thus all measurements are made externally to the tube. The result of these inovations is that non-destructive examination can be made in a single pass of the tube, and the assessment is more accurate, economical, and faster than that possible with existing techniques....

  20. MACHINE LEARNING IMPLEMENTATION FOR THE CLASSIFICATION OF ATTACKS ON WEB SYSTEMS. PART 1

    Directory of Open Access Journals (Sweden)

    K. Smirnova

    2017-08-01

    Full Text Available The possibility of applying machine learning is considered for the classification of malicious requests to a Web application. This approach excludes the use of deterministic analysis systems (for example, expert systems, and based on the application of a cascade of neural networks or perceptrons on an approximate model to the real human brain. The main idea of the work is to enable to describe complex attack vectors consisting of feature sets, abstract terms for compiling a training sample, controlling the quality of recognition and classifying each of the layers (networks participating in the work, with the ability to adjust not the entire network, But only a small part of it, in the training of which a mistake or inaccuracy crept in.  The design of the developed network can be described as a cascaded, scalable neural network.  The developed system of intrusion detection uses a three-layer neural network. Layers can be built independently of each other by cascades. In the first layer, for each class of attack recognition, there is a corresponding network and correctness is checked on this network. To learn this layer, we have chosen classes of things that can be classified uniquely as yes or no, that is, they are linearly separable. Thus, a layer is obtained not just of neurons, but of their microsets, which can best determine whether is there some data class in the query or not. The following layers are not trained to recognize the attacks themselves, they are trained that a set of attacks creates certain threats. This allows you to more accurately recognize the attacker's attempts to bypass the defense system, as well as classify the target of the attack, and not just its fact. Simple layering allows you to minimize the percentage of false positives.

  1. RANDOM FORESTS BASED MULTIPLE CLASSIFIER SYSTEM FOR POWER-LINE SCENE CLASSIFICATION

    Directory of Open Access Journals (Sweden)

    H. B. Kim

    2012-09-01

    Full Text Available The increasing use of electrical energy has yielded more necessities of electric utilities including transmission lines and electric pylons which require a real-time risk monitoring to prevent massive economical damages. Recently, Airborne Laser Scanning (ALS has become one of primary data acquisition tool for corridor mapping due to its ability of direct 3D measurements. In particular, for power-line risk management, a rapid and accurate classification of power-line objects is an extremely important task. We propose a 3D classification method combining results obtained from multiple classifier trained with different features. As a base classifier, we employ Random Forests (RF which is a composite descriptors consisting of a number of decision trees populated through learning with bootstrapping samples. Two different sets of features are investigated that are extracted in a point domain and a feature (i.e., line & polygon domain. RANSAC and Minimum Description Length (MDL are applied to create lines and a polygon in each volumetric pixel (voxel for the line & polygon features. Two RFs are trained from the two groups of features uncorrelated by Principle Component Analysis (PCA, which results are combined for final classification. The experiment with two real datasets demonstrates that the proposed classification method shows 10% improvements in classification accuracy compared to a single classifier.

  2. A radiographic classification system in juvenile rheumatoid arthritis applied to the knee

    Energy Technology Data Exchange (ETDEWEB)

    Dale, K. [Dept. of Radiology, Oslo Sanitetsforening Rheumatism Hospital (Norway); Paus, A.C. [Dept. of Surgery, Oslo Sanitetsforening Rheumatism Hospital (Norway); Laires, K. [Dept. of Radiology, Oslo Sanitetsforening Rheumatism Hospital (Norway)

    1994-02-01

    A new radiographic grading system for evaluation of juvenile rheumatoid arthritis (JRA) for the knee is presented. The classification is based on known arthritic criteria in childhood. Joints with erosion are given a higher score than growth disturbances alone. Signs of osteoarthrosis including joint space narrowing were excluded from the classification. The femorotibial and patello-femoral joints are assessed together. Verbal definitions are used for the classification, but, regarding the erosions, standard reference films are used. The intra- and inter-observer variations of the method were low. (P < 0.01) (orig.)

  3. Inter- and intrareader variability in the interpretation of two radiographic classification systems for juvenile rheumatoid arthritis

    Energy Technology Data Exchange (ETDEWEB)

    Doria, Andrea S.; Castro, Claudio C. de; Sernik, Renato A.; Vitule, Luis F.; Arantes, Paula R.; Lucato, Leandro; Germano, Marco A.N.; Cerri, Giovanni G. [Department of Diagnostic Imaging, Heart Institute (InCor) and Radiology Institute (InRad), Hospital das Clinicas da Universidade de Sao Paulo, Sao Paulo (Brazil); Kiss, Maria Helena B. [Division of Rheumatology, Children' s Institute, Hospital das Clinicas da Universidade de Sao Paulo, Sao Paulo (Brazil); Silva, Carlos H.M. [Division of Rheumatology, Department of Pediatrics, Faculdade de Medicina da Universidade Federal de Uberlandia MG, Uberlandia (Brazil); Zerbini, Cristiano A.F. [Division of Rheumatology, Hospital Heliopolis, Sao Paulo (Brazil)

    2003-10-01

    To evaluate the inter- and intrareader variability for interpretation of a modified Larsen's radiographic classification system for juvenile rheumatoid arthritis (JRA) focused on osteochondral lesions and a conventional Larsen's classification system, compared to a reference MR scoring system of corresponding images. Seventy-five radiographs of 60 children with JRA, performed within a short interval of time from the MR examinations, were independently evaluated by three experienced radiologists, three diagnostic imaging residents and three rheumatologists, in two separate sessions, according to the two different classification methods, blinded to the corresponding MR images. The inter- and intrareader concordance rates between the two radiographic classification systems and the MR-related radiographs were respectively poor and poor/moderate. The interobserver range of weighted kappa values for the conventional and the modified Larsen's system respectively was 0.25-0.37 vs 0.19-0.39 for radiologists, 0.25-0.37 vs 0.18-0.30 for residents and 0.19-0.51 vs 0.17-0.29 for rheumatologists. The intrareader rate ranged from 0.17-0.55 for radiologists, 0.2-0.56 for residents, and 0.14-0.59 for rheumatologists. Although the proposal of a new radiographic classification system for JRA focused on osteochondral abnormalities sounds promising, the low inter- and intrareader concordance rates with an MR-related radiographic system makes the clinical applicability of such a radiographic system less suitable. (orig.)

  4. Development of an Accurate Low-cost Ultrasonic Localization System for Autonomous Mobile Robots in Indoor Environments

    Institute of Scientific and Technical Information of China (English)

    Yong-hwi KIM; Ui-kyu SONG; Byung-kook KIM

    2010-01-01

    An accurate low-cost ultrasonic localization system is developed for automated nobile robots in indoor environments,which is essential for automatic navigation of mobile robots with various tasks.Although ultrasonic sensors are more cost-effective than other sensors such as Laser Range Finder(LR F)and visit,but they are inaccurate and directionally ambiguous.First,the matched filter is used to measure the distance accurately.For resolving the computational complexity of the matched filter,a new matched filter algorithm with simple computation is proposed.Then,an ultrasonic localization system is peoposed which consists of three ultrasonic receivers and two or more transmitters for improving position and orientation accuracy was developed.Finally,an extended Kalman filter is designed to estimate both the static and dynamic positions and orientations.Various simulations and experimental results show that the proposed system is effective.

  5. Optical Image Classification Using Optical/digital Hybrid Image Processing Systems.

    Science.gov (United States)

    Li, Xiaoyang

    1990-01-01

    Offering parallel and real-time operations, optical image classification is becoming a general technique in the solution of real-life image classification problems. This thesis investigates several algorithms for optical realization. Compared to other statistical pattern recognition algorithms, the Kittler-Young transform can provide more discriminative feature spaces for image classification. We shall apply the Kittler-Young transform to image classification and implement it on optical systems. A feature selection criterion is designed for the application of the Kittler -Young transform to image classification. The realizations of the Kittler-Young transform on both a joint transform correlator and a matrix multiplier are successively conducted. Experiments of applying this technique to two-category and three-category problems are demonstrated. To combine the advantages of the statistical pattern recognition algorithms and the neural network models, processes using the two methods are studied. The Karhunen-Loeve Hopfield model is developed for image classification. This model has significant improvement in the system capacity and the capability of using image structures for more discriminative classification processes. As another such hybrid process, we propose the feature extraction perceptron. The application of feature extraction techniques to the perceptron shortens its learning time. An improved activation function of neurons (dynamic activation function), its design and updating rule for fast learning process and high space-bandwidth product image classification are also proposed. We have shortened by two-thirds the learning time on the feature extraction perceptron as compared with the original perceptron. By using this architecture, we have shown that the classification performs better than both the Kittler-Young transform and the original perceptron.

  6. [Classification and staging systems for hilar cholangio-carcinoma (Klatskin tumors): clinical application and practical relevance].

    Science.gov (United States)

    Gavrilovici, V; Grecu, F; Seripcariu, V; Dragomir, Cr

    2011-01-01

    Hilar cholangiocarcinomas or Klatskin tumors have been classified in 1975 by French surgeons Henri Bismuth and Marvin B. Corlette and this remains largely used in clinical practice. The authors present the TNM classification and the changes introduced by the sixth and seventh edition of Union for International Cancer Control regarding the tumors of the proximal bile duct and describe Blumgart classification for tumors of this site. The usefulness of these systems is assessed considering the last six years experience of the service.

  7. Sexual orientation and gender identity: review of concepts, controversies and their relation to psychopathology classification systems

    OpenAIRE

    Carla eMoleiro; Nuno ePinto

    2015-01-01

    WOS:000363413700001 (Nº de Acesso Web of Science) Numerous controversies and debates have taken place throughout the history of psychopathology (and its main classification systems) with regards to sexual orientation and gender identity. These are still reflected on present reformulations of gender dysphoria in both the Diagnostic and Statistical Manual and the International Classification of Diseases, and in more or less subtle micro-aggressions experienced by lesbian, gay, bisexual and t...

  8. Analysis on Systematic Water Scarcity Based on Establishment of Water Scarcity Classification System

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    It would be very helpful for making countermeasures against complex water scarcity by analysis on systematic water scarcity.Based on the previous researches on water scarcity classification,a classification system of water scarcity was established according to contributing factors,which comprises three water scarcity categories caused by anthropic factors,natural factors and mixed factors respectively.Accordingly,the concept of systematic water scarcity was proposed,which can be defined as one type of water...

  9. Computer-aided diagnosis system: a Bayesian hybrid classification method.

    Science.gov (United States)

    Calle-Alonso, F; Pérez, C J; Arias-Nicolás, J P; Martín, J

    2013-10-01

    A novel method to classify multi-class biomedical objects is presented. The method is based on a hybrid approach which combines pairwise comparison, Bayesian regression and the k-nearest neighbor technique. It can be applied in a fully automatic way or in a relevance feedback framework. In the latter case, the information obtained from both an expert and the automatic classification is iteratively used to improve the results until a certain accuracy level is achieved, then, the learning process is finished and new classifications can be automatically performed. The method has been applied in two biomedical contexts by following the same cross-validation schemes as in the original studies. The first one refers to cancer diagnosis, leading to an accuracy of 77.35% versus 66.37%, originally obtained. The second one considers the diagnosis of pathologies of the vertebral column. The original method achieves accuracies ranging from 76.5% to 96.7%, and from 82.3% to 97.1% in two different cross-validation schemes. Even with no supervision, the proposed method reaches 96.71% and 97.32% in these two cases. By using a supervised framework the achieved accuracy is 97.74%. Furthermore, all abnormal cases were correctly classified.

  10. Modelling of Limestone Dissolution in Wet FGD Systems: The Importance of an Accurate Particle Size Distribution

    DEFF Research Database (Denmark)

    Kiil, Søren; Johnsson, Jan Erik; Dam-Johansen, Kim

    1999-01-01

    In wet flue gas desulphurisation (FGD) plants, the most common sorbent is limestone. Over the past 25 years, many attempts to model the transient dissolution of limestone particles in aqueous solutions have been performed, due to the importance for the development of reliable FGD simu-lation tools...... suspended in a liquid solution. The measured PSDs were sensitive to the addition of a dispersing agent, the dispersion time, and the presence of ultrasound. It was found that the different PSDs influenced the simulated rate of dis-solution significantly (i.e. from below to above the measured dissolution...... rate). The results of this work show that a representative PSD is essential in order to model the rate of dissolution of lime-stone particles accurately....

  11. Future of the TNM classification and staging system in head and neck cancer.

    NARCIS (Netherlands)

    Takes, R.P.; Rinaldo, A.; Silver, C.E.; Piccirillo, J.F.; Haigentz Jr, M.; Suarez, C.; Poorten, V.L. van der; Hermans, R.; Rodrigo, J.P.; Devaney, K.O.; Ferlito, A.

    2010-01-01

    Staging systems for cancer, including the most universally used TNM classification system, have been based almost exclusively on anatomic information. However, the question arises whether staging systems should be based on this information alone. Other parameters have been identified that should be

  12. Terminology and classification aspects of the Bethesda System for Reporting Thyroid Cytopathology

    Directory of Open Access Journals (Sweden)

    G V Semkina

    2012-12-01

    Full Text Available The article is devoted to the relevance of Betesda System for Reporting Thyroid Cytopathology. This article summarizes recent data on the main differences and advantages of new classification system. Application of the Betesda System for Reporting Thyroid Cytopathology leads to the increased sensitivity and specificity of FNA.

  13. Classification of weld defect based on information fusion technology for radiographic testing system

    Science.gov (United States)

    Jiang, Hongquan; Liang, Zeming; Gao, Jianmin; Dang, Changying

    2016-03-01

    Improving the efficiency and accuracy of weld defect classification is an important technical problem in developing the radiographic testing system. This paper proposes a novel weld defect classification method based on information fusion technology, Dempster-Shafer evidence theory. First, to characterize weld defects and improve the accuracy of their classification, 11 weld defect features were defined based on the sub-pixel level edges of radiographic images, four of which are presented for the first time in this paper. Second, we applied information fusion technology to combine different features for weld defect classification, including a mass function defined based on the weld defect feature information and the quartile-method-based calculation of standard weld defect class which is to solve a sample problem involving a limited number of training samples. A steam turbine weld defect classification case study is also presented herein to illustrate our technique. The results show that the proposed method can increase the correct classification rate with limited training samples and address the uncertainties associated with weld defect classification.

  14. Classification of weld defect based on information fusion technology for radiographic testing system.

    Science.gov (United States)

    Jiang, Hongquan; Liang, Zeming; Gao, Jianmin; Dang, Changying

    2016-03-01

    Improving the efficiency and accuracy of weld defect classification is an important technical problem in developing the radiographic testing system. This paper proposes a novel weld defect classification method based on information fusion technology, Dempster-Shafer evidence theory. First, to characterize weld defects and improve the accuracy of their classification, 11 weld defect features were defined based on the sub-pixel level edges of radiographic images, four of which are presented for the first time in this paper. Second, we applied information fusion technology to combine different features for weld defect classification, including a mass function defined based on the weld defect feature information and the quartile-method-based calculation of standard weld defect class which is to solve a sample problem involving a limited number of training samples. A steam turbine weld defect classification case study is also presented herein to illustrate our technique. The results show that the proposed method can increase the correct classification rate with limited training samples and address the uncertainties associated with weld defect classification.

  15. Global Stress Classification System for Materials Used in Solar Energy Applications

    Science.gov (United States)

    Slamova, Karolina; Schill, Christian; Herrmann, Jan; Datta, Pawan; Chih Wang, Chien

    2016-08-01

    Depending on the geographical location, the individual or combined impact of environmental stress factors and corresponding performance losses for solar applications varies significantly. Therefore, as a strategy to reduce investment risks and operating and maintenance costs, it is necessary to adapt the materials and components of solar energy systems specifically to regional environmental conditions. The project «GloBe Solar» supports this strategy by focusing on the development of a global stress classification system for materials in solar energy applications. The aim of this classification system is to assist in the identification of the individual stress conditions for every location on the earth's surface. The stress classification system could serve as a decision support tool for the industry (manufacturers, investors, lenders and project developers) and help to improve knowledge and services that can provide higher confidence to solar power systems.

  16. An Expert System for Diagnosis of Sleep Disorder Using Fuzzy Rule-Based Classification Systems

    Science.gov (United States)

    Septem Riza, Lala; Pradini, Mila; Fitrajaya Rahman, Eka; Rasim

    2017-03-01

    Sleep disorder is an anomaly that could cause problems for someone’ sleeping pattern. Nowadays, it becomes an issue since people are getting busy with their own business and have no time to visit the doctors. Therefore, this research aims to develop a system used for diagnosis of sleep disorder using Fuzzy Rule-Based Classification System (FRBCS). FRBCS is a method based on the fuzzy set concepts. It consists of two steps: (i) constructing a model/knowledge involving rulebase and database, and (ii) prediction over new data. In this case, the knowledge is obtained from experts whereas in the prediction stage, we perform fuzzification, inference, and classification. Then, a platform implementing the method is built with a combination between PHP and the R programming language using the “Shiny” package. To validate the system that has been made, some experiments have been done using data from a psychiatric hospital in West Java, Indonesia. Accuracy of the result and computation time are 84.85% and 0.0133 seconds, respectively.

  17. The development of the globally harmonized system (GHS) of classification and labelling of hazardous chemicals.

    Science.gov (United States)

    Winder, Chris; Azzi, Rola; Wagner, Drew

    2005-10-17

    The hazards of chemicals can be classified using classification criteria that are based on physical, chemical and ecotoxicological endpoints. These criteria may be developed be iteratively, based on scientific or regulatory processes. A number of national and international schemes have been developed over the past 50 years, and some, such as the UN Dangerous Goods system or the EC system for hazardous substances, are in widespread use. However, the unnecessarily complicated multiplicity of existing hazard classifications created much unnecessary confusion at the user level, and a recommendation was made at the 1992 Rio Earth summit to develop a globally harmonized chemical hazard classification and compatible labelling system, including material safety data sheets and easily understandable symbols, that could be used for manufacture, transport, use and disposal of chemical substances. This became the globally harmonized system for the Classification and Labelling of Chemicals (GHS). The developmental phase of the GHS is largely complete. Consistent criteria for categorising chemicals according to their toxic, physical, chemical and ecological hazards are now available. Consistent hazard communication tools such as labelling and material safety data sheets are also close to finalisation. The next phase is implementation of the GHS. The Intergovernmental Forum for Chemical Safety recommends that all countries implement the GHS as soon as possible with a view to have the system fully operational by 2008. When the GHS is in place, the world will finally have one system for classification of chemical hazards.

  18. Comparing the Utility of the 2000 and 2005 Carnegie Classification Systems in Research on Students' College Experiences and Outcomes

    Science.gov (United States)

    McCormick, Alexander C.; Pike, Gary R.; Kuh, George D.; Chen, Pu-Shih Daniel

    2009-01-01

    This study compares the explanatory power of the 2000 edition of Carnegie Classification, the 2005 revision of the classification, and selected variables underlying Carnegie's expanded 2005 classification system using data from the National Survey of Student Engagement's spring 2004 administration. Results indicate that the 2000 and 2005…

  19. 行走机器人高精度视觉系统%Highly accurate vision system of mobile robot

    Institute of Scientific and Technical Information of China (English)

    裴以建; 余江; 宗容; 蔡光卉

    2006-01-01

    A highly accurate vision system of mobile robot is presented. With its double-instruction confirmation function, safety and reliability of robot operation can be improved and control precision be assured as well. Furthermore, robot can automatically search its goals in three dimensional space (axis x, y, and z) and accurately operate by using the system.%本系统是为行走机器人研制的高精度视觉系统,具备双重指令确认功能,不仅大大提高了操作的安全可靠程度,同时为机器人操作的控制精度提供了必要的保证,可使机器人从x,y,z三维空间中自动搜寻目标,准确无误地进行操作.

  20. SPARC: Accurate and efficient finite-difference formulation and parallel implementation of Density Functional Theory. Part II: Periodic systems

    CERN Document Server

    Ghosh, Swarnava

    2016-01-01

    As the second component of SPARC (Simulation Package for Ab-initio Real-space Calculations), we present an accurate and efficient finite-difference formulation and parallel implementation of Density Functional Theory (DFT) for periodic systems. Specifically, employing a local formulation of the electrostatics, the Chebyshev polynomial filtered self-consistent field iteration, and a reformulation of the non-local force component, we develop a finite-difference framework wherein both the energy and atomic forces can be efficiently calculated to within chemical accuracies. We demonstrate using a wide variety of materials systems that SPARC obtains high convergence rates in energy and forces with respect to spatial discretization to reference plane-wave result; energies and forces that are consistent and display negligible `egg-box' effect; and accurate ground-state properties. We also demonstrate that the weak and strong scaling behavior of SPARC is similar to well-established and optimized plane-wave implementa...

  1. The Normalization of Citation Counts Based on Classification Systems

    Directory of Open Access Journals (Sweden)

    Andreas Barth

    2013-08-01

    Full Text Available If we want to assess whether the paper in question has had a particularly high or low citation impact compared to other papers, the standard practice in bibliometrics is to normalize citations in respect of the subject category and publication year. A number of proposals for an improved procedure in the normalization of citation impact have been put forward in recent years. Against the background of these proposals, this study describes an ideal solution for the normalization of citation impact: in a first step, the reference set for the publication in question is collated by means of a classification scheme, where every publication is associated with a single principal research field or subfield entry (e.g., via Chemical Abstracts sections and a publication year. In a second step, percentiles of citation counts are calculated for this set and used to assign the normalized citation impact score to the publications (and also to the publication in question.

  2. The normalization of citation counts based on classification systems

    CERN Document Server

    Bornmann, Lutz; Barth, Andreas

    2013-01-01

    If we want to assess whether the paper in question has had a particularly high or low citation impact compared to other papers, the standard practice in bibliometrics is to normalize citations in respect of the subject category and publication year. A number of proposals for an improved procedure in the normalization of citation impact have been put forward in recent years. Against the background of these proposals this study describes an ideal solution for the normalization of citation impact: in a first step, the reference set for the publication in question is collated by means of a classification scheme, where every publication is associated with a single principal research field or subfield entry (e. g. via Chemical Abstracts sections) and a publication year. In a second step, percentiles of citation counts are calculated for this set and used to assign the normalized citation impact score to the publications (and also to the publication in question).

  3. A fast and accurate SystemC-AMS model for PLL

    NARCIS (Netherlands)

    Ma, K.; Leuken, R. van; Vidojkovic, M.; Romme, J.; Rampu, S.; Pflug, H.; Huang, L.; Dolmans, G.

    2011-01-01

    PLLs have become an important part of electrical systems. When designing a PLL, an efficient and reliable simulation platform for system evaluation is needed. However, the closed loop simulation of a PLL is time consuming. To address this problem, in this paper, a new PLL model containing both digit

  4. Development, integration and qualification of a measurement system for accurate and fast placements of flipchips

    NARCIS (Netherlands)

    Kruif, B.J. de; Hoog, T. de; Hoogstrate, A.; Zon, B. van der

    2012-01-01

    A positioning system has been developed that places dies quickly and with high accuracy on a rigid substrate. The increased accuracy makes it possible to stack dies, or use dies with an ultra fine pitch, while not sacrificing speed. A single camera system determines the position of the die on the bo

  5. Young Planetary Nebulae: Hubble Space Telescope Imaging and a New Morphological Classification System

    CERN Document Server

    Sahai, Raghvendra; Villar, Gregory G

    2011-01-01

    Using Hubble Space Telescope images of 119 young planetary nebulae, most of which have not previously been published, we have devised a comprehensive morphological classification system for these objects. This system generalizes a recently devised system for pre-planetary nebulae, which are the immediate progenitors of planetary nebulae (PNs). Unlike previous classification studies, we have focussed primarily on young PNs rather than all PNs, because the former best show the influences or symmetries imposed on them by the dominant physical processes operating at the first and primary stage of the shaping process. Older PNs develop instabilities, interact with the ambient interstellar medium, and are subject to the passage of photoionization fronts, all of which obscure the underlying symmetries and geometries imposed early on. Our classification system is designed to suffer minimal prejudice regarding the underlying physical causes of the different shapes and structures seen in our PN sample, however, in many...

  6. Reflecting on the structure of soil classification systems: insights from a proposal for integrating subsoil data into soil information systems

    Science.gov (United States)

    Dondeyne, Stefaan; Juilleret, Jérôme; Vancampenhout, Karen; Deckers, Jozef; Hissler, Christophe

    2017-04-01

    Classification of soils in both World Reference Base for soil resources (WRB) and Soil Taxonomy hinges on the identification of diagnostic horizons and characteristics. However as these features often occur within the first 100 cm, these classification systems convey little information on subsoil characteristics. An integrated knowledge of the soil, soil-to-substratum and deeper substratum continuum is required when dealing with environmental issues such as vegetation ecology, water quality or the Critical Zone in general. Therefore, we recently proposed a classification system of the subsolum complementing current soil classification systems. By reflecting on the structure of the subsoil classification system which is inspired by WRB, we aim at fostering a discussion on some potential future developments of WRB. For classifying the subsolum we define Regolite, Saprolite, Saprock and Bedrock as four Subsolum Reference Groups each corresponding to different weathering stages of the subsoil. Principal qualifiers can be used to categorize intergrades of these Subsoil Reference Groups while morphologic and lithologic characteristics can be presented with supplementary qualifiers. We argue that adopting a low hierarchical structure - akin to WRB and in contrast to a strong hierarchical structure as in Soil Taxonomy - offers the advantage of having an open classification system avoiding the need for a priori knowledge of all possible combinations which may be encountered in the field. Just as in WRB we also propose to use principal and supplementary qualifiers as a second level of classification. However, in contrast to WRB we propose to reserve the principal qualifiers for intergrades and to regroup the supplementary qualifiers into thematic categories (morphologic or lithologic). Structuring the qualifiers in this manner should facilitate the integration and handling of both soil and subsoil classification units into soil information systems and calls for paying

  7. Optimizing steam flood performance utilizing a new and highly accurate two phase steam measurement system

    Energy Technology Data Exchange (ETDEWEB)

    Huff, B. D.; Warren, P. B. [CalResources LLC (Canada); Whorff, F. [ITT Barton (Canada)

    1995-11-01

    The development of a two phase steam measurement system was documented. The system consists of a `V` cone differential pressure device and a vortex meter velocity device in series through which the steam flows. Temperature and pressure sensors are electronically interfaced with a data logging system. The design was described as being very simple and rugged, consequently, well suited to monitoring in the field.. Steam quality measurements were made in the Kern River Field and the Coalinga Field thermal projects using a surface steam separator. In steam flood operations, steam cost is very high, hence appropriate distribution of the steam can result in significant cost reduction. This technology allows the measurement of steam flow and quality at any point in the steam distribution system. The metering system`s orifice meter was found to have a total average error of 45%, with 25% of that attributable to `cold leg` problem. Installation of the metering system was expected to result in a steam use reduction of 8%, without any impact on production. Steam re-distribution could result in a potential oil production increase of 10%. 12 refs., 8 tabs., 9 figs.

  8. Classification of Aeronautics System Health and Safety Documents

    Data.gov (United States)

    National Aeronautics and Space Administration — Most complex aerospace systems have many text reports on safety, maintenance, and associated issues. The Aviation Safety Reporting System (ASRS) spans several...

  9. Accurate and robust unitary transformation of a high-dimensional quantum system

    CERN Document Server

    Anderson, B E; Riofrío, C A; Deutsch, I H; Jessen, P S

    2014-01-01

    Quantum control in large dimensional Hilbert spaces is essential for realizing the power of quantum information processing. For closed quantum systems the relevant input/output maps are unitary transformations, and the fundamental challenge becomes how to implement these with high fidelity in the presence of experimental imperfections and decoherence. For two-level systems (qubits) most aspects of unitary control are well understood, but for systems with Hilbert space dimension d>2 (qudits), many questions remain regarding the optimal design of control Hamiltonians and the feasibility of robust implementation. Here we show that arbitrary, randomly chosen unitary transformations can be efficiently designed and implemented in a large dimensional Hilbert space (d=16) associated with the electronic ground state of atomic 133Cs, achieving fidelities above 0.98 as measured by randomized benchmarking. Generalizing the concepts of inhomogeneous control and dynamical decoupling to d>2 systems, we further demonstrate t...

  10. Simple and accurate empirical absolute volume calibration of a multi-sensor fringe projection system

    Science.gov (United States)

    Gdeisat, Munther; Qudeisat, Mohammad; AlSa`d, Mohammed; Burton, David; Lilley, Francis; Ammous, Marwan M. M.

    2016-05-01

    This paper suggests a novel absolute empirical calibration method for a multi-sensor fringe projection system. The optical setup of the projector-camera sensor can be arbitrary. The term absolute calibration here means that the centre of the three dimensional coordinates in the resultant calibrated volume coincides with a preset centre to the three-dimensional real-world coordinate system. The use of a zero-phase fringe marking spot is proposed to increase depth calibration accuracy, where the spot centre is determined with sub-pixel accuracy. Also, a new method is proposed for transversal calibration. Depth and transversal calibration methods have been tested using both single sensor and three-sensor fringe projection systems. The standard deviation of the error produced by this system is 0.25 mm. The calibrated volume produced by this method is 400 mm×400 mm×140 mm.

  11. An accurate system for onsite calibration of electronic transformers with digital output

    Science.gov (United States)

    Zhi, Zhang; Li, Hong-Bin

    2012-06-01

    Calibration systems with digital output are used to replace conventional calibration systems because of principle diversity and characteristics of digital output of electronic transformers. But precision and unpredictable stability limit their onsite application even development. So fully considering the factors influencing accuracy of calibration system and employing simple but reliable structure, an all-digital calibration system with digital output is proposed in this paper. In complicated calibration environments, precision and dynamic range are guaranteed by A/D converter with 24-bit resolution, synchronization error limit is nanosecond by using the novelty synchronization method. In addition, an error correction algorithm based on the differential method by using two-order Hanning convolution window has good inhibition of frequency fluctuation and inter-harmonics interference. To verify the effectiveness, error calibration was carried out in the State Grid Electric Power Research Institute of China and results show that the proposed system can reach the precision class up to 0.05. Actual onsite calibration shows that the system has high accuracy, and is easy to operate with satisfactory stability.

  12. Text Classification using Data Mining

    CERN Document Server

    Kamruzzaman, S M; Hasan, Ahmed Ryadh

    2010-01-01

    Text classification is the process of classifying documents into predefined categories based on their content. It is the automated assignment of natural language texts to predefined categories. Text classification is the primary requirement of text retrieval systems, which retrieve texts in response to a user query, and text understanding systems, which transform text in some way such as producing summaries, answering questions or extracting data. Existing supervised learning algorithms to automatically classify text need sufficient documents to learn accurately. This paper presents a new algorithm for text classification using data mining that requires fewer documents for training. Instead of using words, word relation i.e. association rules from these words is used to derive feature set from pre-classified text documents. The concept of Naive Bayes classifier is then used on derived features and finally only a single concept of Genetic Algorithm has been added for final classification. A system based on the...

  13. Clinical Application of Six Current Classification Systems for Iatrogenic Bile Duct Injuries after Cholecystectomy.

    Science.gov (United States)

    Velidedeoglu, Mehmet; Arikan, Akif Enes; Uludag, Sezgin Server; Olgun, Deniz Cebi; Kilic, Fahrettin; Kapan, Metin

    2015-05-01

    Due to being a severe complication, iatrogenic bile duct injury is still a challenging issue for surgeons in gallbladder surgery. However, a commonly accepted classification describing the type of injury has not been available yet. This study aims to evaluate ability of six current classification systems to discriminate bile duct injury patterns. Twelve patients, who were referred to our clinic because of iatrogenic bile duct injury after laparoscopic cholecystectomy were reviewed retrospectively. We described type of injury for each patient according to current six different classifications. 9 patients underwent definitive biliary reconstruction. Bismuth, Strasberg-Bismuth, Stewart-Way and Neuhaus classifications do not consider vascular involvement, Siewert system does, but only for the tangential lesions without structural loss of duct and lesion with a structural defect of hepatic or common bile duct. Siewert, Neuhaus and Stewart-Way systems do not discriminate between lesions at or above bifurcation of the hepatic duct. The Hannover classification may resolve the missing aspects of other systems by describing additional vascular involvement and location of the lesion at or above bifurcation.

  14. Non-invasive papillary urothelial neoplasms: the 2004 WHO/ISUP classification system.

    Science.gov (United States)

    Miyamoto, Hiroshi; Miller, Jeremy S; Fajardo, Daniel A; Lee, Thomas K; Netto, George J; Epstein, Jonathan I

    2010-01-01

    The classification and grading of papillary urothelial neoplasms has been a long-standing subject of controversy. Previously, numerous diverse grading schemes for bladder tumor, including the 1973 World Health Organization (WHO) classification, existed whereby one of the major limitations was poor inter-observer reproducibility among pathologists. The WHO/International Society of Urological Pathology (ISUP) consensus classification system of urothelial neoplasms of the urinary bladder was developed in 1998 and was revised most recently in 2003 (published in 2004). Importantly, the current classification system provides detailed histological criteria for papillary urothelial lesions and allows for designation of a lesion (papillary urothelial neoplasm of low malignant potential) with a negligible risk of progression. Thus, the latest system is designed to be a universally acceptable one for bladder tumors that not only could be effectively used by pathologists, urologists, and oncologists, but also stratifies the tumors into prognostically significant categories. This article outlines the 2004 WHO/ISUP classification system regarding the specific histological criteria for non-invasive papillary urothelial neoplasms and the clinical significance of each category.

  15. A polymer visualization system with accurate heating and cooling control and high-speed imaging.

    Science.gov (United States)

    Wong, Anson; Guo, Yanting; Park, Chul B; Zhou, Nan Q

    2015-04-23

    A visualization system to observe crystal and bubble formation in polymers under high temperature and pressure has been developed. Using this system, polymer can be subjected to a programmable thermal treatment to simulate the process in high pressure differential scanning calorimetry (HPDSC). With a high-temperature/high-pressure view-cell unit, this system enables in situ observation of crystal formation in semi-crystalline polymers to complement thermal analyses with HPDSC. The high-speed recording capability of the camera not only allows detailed recording of crystal formation, it also enables in situ capture of plastic foaming processes with a high temporal resolution. To demonstrate the system's capability, crystal formation and foaming processes of polypropylene/carbon dioxide systems were examined. It was observed that crystals nucleated and grew into spherulites, and they grew at faster rates as temperature decreased. This observation agrees with the crystallinity measurement obtained with the HPDSC. Cell nucleation first occurred at crystals' boundaries due to CO₂ exclusion from crystal growth fronts. Subsequently, cells were nucleated around the existing ones due to tensile stresses generated in the constrained amorphous regions between networks of crystals.

  16. Development and calibration of an accurate 6-degree-of-freedom measurement system with total station

    Science.gov (United States)

    Gao, Yang; Lin, Jiarui; Yang, Linghui; Zhu, Jigui

    2016-12-01

    To meet the demand of high-accuracy, long-range and portable use in large-scale metrology for pose measurement, this paper develops a 6-degree-of-freedom (6-DOF) measurement system based on total station by utilizing its advantages of long range and relative high accuracy. The cooperative target sensor, which is mainly composed of a pinhole prism, an industrial lens, a camera and a biaxial inclinometer, is designed to be portable in use. Subsequently, a precise mathematical model is proposed from the input variables observed by total station, imaging system and inclinometer to the output six pose variables. The model must be calibrated in two levels: the intrinsic parameters of imaging system, and the rotation matrix between coordinate systems of the camera and the inclinometer. Then corresponding approaches are presented. For the first level, we introduce a precise two-axis rotary table as a calibration reference. And for the second level, we propose a calibration method by varying the pose of a rigid body with the target sensor and a reference prism on it. Finally, through simulations and various experiments, the feasibilities of the measurement model and calibration methods are validated, and the measurement accuracy of the system is evaluated.

  17. Accurate and portable weigh-in-motion system for manifesting air cargo

    Science.gov (United States)

    Nodine, Robert N.; Scudiere, Matthew B.; Jordan, John K.

    1995-12-01

    An automated and portable weigh-in-motion system has been developed at Oak Ridge National Laboratory for the purpose of manifesting cargo onto aircraft. The system has an accuracy range of plus or minus 3.0% to plus or minus 6.0% measuring gross vehicle weight and locating the center of balance of moving vehicles at speeds of 1 to 5 mph. This paper reviews the control/user interface system and weight determination algorithm developed to acquire, process, and interpret multiple sensor inputs. The development effort resulted in a self- zeroing, user-friendly system capable of weighing a wide range of vehicles in any random order. The control system is based on the STANDARD (STD) bus and incorporates custom- designed data acquisition and sensor fusion hardware controlled by a personal computer (PC) based single-board computer. The user interface is written in the 'C' language to display number of axles, axle weight, axle spacing, gross weight, and center of balance. The weighing algorithm developed functions with any linear weight sensor and a set of four axle switches per sensor.

  18. Accurate and portable weigh-in-motion system for manifesting air cargo

    Energy Technology Data Exchange (ETDEWEB)

    Nodine, R.N.; Scudiere, M.B.; Jordan, J.K.

    1995-12-01

    An automated and portable weigh-in-motion system has been developed at Oak Ridge National Laboratory for the purpose of manifesting cargo onto aircraft. The system has an accuracv range of {plus_minus} 3.0% to {plus_minus} 6.0% measuring gross vehicle weight and locating the center of balance of moving vehicles at speeds of 1 to 5 mph. This paper reviews the control/user interface system and weight determination algorithm developed to acquire, process, and interpret multiple sensor inputs. The development effort resulted in a self-zeroing, user-friendly system capable of weighing a wide range of vehicles in any random order. The control system is based on the STANDARD (STD) bus and incorporates custom-designed data acquisition and sensor fusion hardware controlled by a personal computer (PC) based single-board computer. The user interface is written in the ``C`` language to display number of axles, axle weight, axle spacing, gross weight, and center of balance. The weighing algorithm developed will function with any linear weight sensor and a set of four axle switches per sensor.

  19. Local classification of stable geometric solutions of systems of quasilinear first-order PDE

    Institute of Scientific and Technical Information of China (English)

    LI; Bing(李兵); LI; Yangcheng(李养成)

    2002-01-01

    Systems of quasilinear first order PDE are studied in the framework of contact manifold. All of the local stable geometric solutions of such systems are classified by using versal deformation and the classification of stable map germs of type ∑1 in singularity theory.

  20. Dengue disease severity in Indonesian children: An evaluation of the World Health Organization classification system

    NARCIS (Netherlands)

    T.E. Setiati (Tatty); A.T.A. Mairuhu; P. Koraka (Penelope); M. Supriatna (Mohamad); M.R. Mac Gillavry (Melvin); D.P.M. Brandjes (Dees); A.D.M.E. Osterhaus (Albert); J.W.M. van der Meer (Jos); E.C.M. van Gorp (Eric); A. Soemantri (Augustinus)

    2007-01-01

    textabstractBackground: Dengue disease severity is usually classified using criteria set up by the World Health Organization (WHO). We aimed to assess the diagnostic accuracy of the WHO classification system and modifications to this system, and evaluated their potential practical usefulness. Method

  1. The Subaxial Cervical Spine Injury Classification System: an external agreement validation study

    NARCIS (Netherlands)

    Middendorp, J.J. van; Audige, L.; Bartels, R.H.M.A.; Bolger, C.; Deverall, H.; Dhoke, P.; Diekerhof, C.H.; Govaert, G.A.; Guimera, V.; Koller, H.; Morris, S.A.; Setiobudi, T.; Hosman, A.J.F.

    2013-01-01

    BACKGROUND CONTEXT: In 2007, the Subaxial Cervical Spine Injury Classification (SLIC) system was introduced demonstrating moderate reliability in an internal validation study. PURPOSE: To assess the agreement on the SLIC system using clinical data from a spinal trauma population and whether the SLIC

  2. Methodology for the construction of a disease nomenclature and classification system for clinical use.

    Science.gov (United States)

    Kiuchi, T; Ohashi, Y; Sato, H; Kaihara, S

    1995-12-01

    The nature and problems of the linguistic representation of clinical data are discussed, using the linguistic theory of Ferdinand de Saussure. Based on the conclusions, a methodology for the construction of a disease nomenclature and a classification system, suitable for use in clinical information systems, is developed using set theory.

  3. The Subaxial Cervical Spine Injury Classification System: an external agreement validation study

    NARCIS (Netherlands)

    Middendorp, J.J. van; Audige, L.; Bartels, R.H.M.A.; Bolger, C.; Deverall, H.; Dhoke, P.; Diekerhof, C.H.; Govaert, G.A.; Guimera, V.; Koller, H.; Morris, S.A.; Setiobudi, T.; Hosman, A.J.F.

    2013-01-01

    BACKGROUND CONTEXT: In 2007, the Subaxial Cervical Spine Injury Classification (SLIC) system was introduced demonstrating moderate reliability in an internal validation study. PURPOSE: To assess the agreement on the SLIC system using clinical data from a spinal trauma population and whether the SLIC

  4. The Subaxial Cervical Spine Injury Classification System : an external agreement validation study

    NARCIS (Netherlands)

    van Middendorp, Joost J.; Audige, Laurent; Bartels, Ronald H.; Bolger, Ciaran; Deverall, Hamish; Dhoke, Priyesh; Diekerhof, Carel H.; Govaert, Geertje A. M.; Guimera, Vicente; Koller, Heiko; Morris, Stephen A. C.; Setiobudi, Tony; Hosman, Allard J. F.

    BACKGROUND CONTEXT: In 2007, the Subaxial Cervical Spine Injury Classification (SLIC) system was introduced demonstrating moderate reliability in an internal validation study. PURPOSE: To assess the agreement on the SLIC system using clinical data from a spinal trauma population and whether the SLIC

  5. International society of neuropathology-haarlem consensus guidelines for nervous system tumor classification and grading

    NARCIS (Netherlands)

    Louis, D.N.; Perry, A.; Burger, P.; Ellison, D.W.; Reifenberger, G.; Deimling, A. Von; Aldape, K.; Brat, D.; Collins, V.P.; Eberhart, C.; Figarella-Branger, D.; Fuller, G.N.; Giangaspero, F.; Giannini, C.; Hawkins, C.; Kleihues, P.; Korshunov, A.; Kros, J.M.; Lopes, M. Beatriz; Ng, H.K.; Ohgaki, H.; Paulus, W.; Pietsch, T.; Rosenblum, M.; Rushing, E.; Soylemezoglu, F.; Wiestler, O.; Wesseling, P.

    2014-01-01

    Major discoveries in the biology of nervous system tumors have raised the question of how non-histological data such as molecular information can be incorporated into the next World Health Organization (WHO) classification of central nervous system tumors. To address this question, a meeting of neur

  6. The Subaxial Cervical Spine Injury Classification System : an external agreement validation study

    NARCIS (Netherlands)

    van Middendorp, Joost J.; Audige, Laurent; Bartels, Ronald H.; Bolger, Ciaran; Deverall, Hamish; Dhoke, Priyesh; Diekerhof, Carel H.; Govaert, Geertje A. M.; Guimera, Vicente; Koller, Heiko; Morris, Stephen A. C.; Setiobudi, Tony; Hosman, Allard J. F.

    2013-01-01

    BACKGROUND CONTEXT: In 2007, the Subaxial Cervical Spine Injury Classification (SLIC) system was introduced demonstrating moderate reliability in an internal validation study. PURPOSE: To assess the agreement on the SLIC system using clinical data from a spinal trauma population and whether the SLIC

  7. An Accurate and Robust Flexible Guidance System for Indoor Industrial Environments

    Directory of Open Access Journals (Sweden)

    David Herrero-Pérez

    2013-07-01

    Full Text Available This work presents the development of a flexible industrial guidance system used to guide Automated Guided Vehicles (AGVs in indoor industrial environments. Typically, wireless guidance systems are composed of path-tracking and localization methods linked to follow a certain route. This paper focuses on the localization approach that permits industrial vehicles to operate indoors with the grade of accuracy, repeatability and reliability required by industrial applications. A key point is that, apart from accuracy, the position estimates should be performed at a high sample rate in order to permit the path tracker to follow the route properly. Robustness of absolute positioning is also crucial in industrial applications. An Extended Kalman Filter (EKF is adopted to fuse the information provided by a laser navigation system and odometry. The effectiveness of the development is tested using a custom modified commercial industrial vehicle operating in an industrial setting.

  8. A universal and flexible theodolite-camera system for making accurate measurements over large volumes

    Science.gov (United States)

    Zhang, Xiaohu; Zhu, Zhaokun; Yuan, Yun; Li, Lichun; Sun, Xiangyi; Yu, Qifeng; Ou, Jianliang

    2012-11-01

    Typically, optical measurement systems can achieve high accuracy over a limited volume, or cover a large volume with low accuracy. In this paper, we propose a universal way of integrating a camera with a theodolite to construct a theodolite-camera (TC) measurement system that can make measurements over a large volume with high accuracy. The TC inherits the advantages of high flexibility and precision from theodolite and camera, but it avoids the need to perform elaborate adjustments on the camera and theodolite. The TC provides a universal and flexible approach to the camera-on-theodolite system. We describe three types of TC based separately on: (i) a total station; (ii) a theodolite; and (iii) a general rotation frame. We also propose three corresponding calibration methods for the different TCs. Experiments have been conducted to verify the measuring accuracy of each of the three types of TC.

  9. CellSense: An Accurate Energy-Efficient GSM Positioning System

    CERN Document Server

    Ibrahim, Mohamed

    2011-01-01

    Context-aware applications have been gaining huge interest in the last few years. With cell phones becoming ubiquitous computing devices, cell phone localization has become an important research problem. In this paper, we present CellSense, a prob- abilistic RSSI-based fingerprinting location determi- nation system for GSM phones. We discuss the chal- lenges of implementing a probabilistic fingerprinting localization technique in GSM networks and present the details of the CellSense systemand how it addresses these challenges. We then extend the proposed system using a hybrid technique that combines probabilistic and deterministic estimation to achieve both high ac- curacy and low computational overhead.Moreover, the accuracy of the hybrid technique is robust to changes in its parameter values. To evaluate our proposed system, we implemented CellSense on Android-based phones. Results from two different testbeds, represent- ing urban and rural environments, for three differ- ent cellular providers show that Ce...

  10. Viewpoint: use of King's conceptual system, nursing informatics, and nursing classification systems for global communication.

    Science.gov (United States)

    Killeen, Mary B; King, Imogene M

    2007-01-01

    To propose a common nursing language for communication among members of the nursing community worldwide. The Taxonomy of Nursing Practice, nursing informatics literature, King's Theory of Goal Attainment applied to the nursing process. Several milestones in nursing in the 20th century indicated the need for a universal language for nursing. The nursing process provides a method for synthesis of nursing data, information, and knowledge and is congruent with Imogene King's Theory of Goal Attainment. The authors advocate for a common nursing language (nursing classification and terminology systems) that would unify nurses worldwide. Supported by nursing theory and technology, global communication would be enhanced for nurses and the interdisciplinary teams of which they are a part. Use of Imogene King's Conceptual System and Theory of Goal Attainment and the nursing specialty of Nursing Informatics are examples of nursing theory and technology to frame global communication.

  11. Recognizing systemic sclerosis: comparative analysis of various sets of classification criteria.

    Science.gov (United States)

    Romanowska-Próchnicka, Katarzyna; Walczyk, Marcela; Olesińska, Marzena

    2016-01-01

    Systemic sclerosis is a complex disease characterized by autoimmunity, vasculopathy and tissue fibrosis. Although most patients present with some degree of skin sclerosis, which is a distinguishing hallmark, the clinical presentation vary greatly complicating the diagnosis. In this regard, new classification criteria were jointly published in 2013 by American College of Rheumatology (ACR) and European League Against Rheumatism (EULAR). A recent major development in the classification criteria is improved sensitivity, particularly for detecting early disease. The new criteria allow more cases to be classified as having systemic sclerosis (SSc), which leads to earlier treatment. Moreover it is clinically beneficial in preventing the disease progression with its irreversible fibrosis and organ damage. The aim of this review is to give insight into new classification criteria and current trends in the diagnosis of systemic sclerosis.

  12. Improved Management of Part Safety Classification System for Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Young; Park, Youn Won; Park, Heung Gyu; Park, Hyo Chan [BEES Inc., Daejeon (Korea, Republic of)

    2016-10-15

    As, in recent years, many quality assurance (QA) related incidents, such as falsely-certified parts and forged documentation, etc., were reported in association with the supply of structures, systems, components and parts to nuclear power plants, a need for a better management of safety classification system was addressed so that it would be based more on the level of parts . Presently, the Korean nuclear power plants do not develop and apply relevant procedures for safety classifications, but rather the safety classes of parts are determined solely based on the experience of equipment designers. So proposed in this paper is a better management plan for safety equipment classification system with an aim to strengthen the quality management for parts. The plan was developed through the analysis of newly introduced technical criteria to be applied to parts of nuclear power plant.

  13. Local position measurement system for fast and accurate 3D monitoring

    Science.gov (United States)

    Fischer, Alexander; Pracherstorfer, Gerald; Stelzer, Andreas; Soeser, Andreas

    2003-07-01

    This contribution describes the components necessary for measurement of the three-dimensional local position of objects with high accuracy and high measurement rate. The methodology is based on the FMCW (frequency modulated continuous wave) technology in state of the art technology described as sensor system. A high speed real-time network collects data and transfers it to a master processing unit (MPU) where 3-D position data is calculated. It is described how to measure and how to process position data for a local, wide area measurement system. Results are shown for a series of static measurements and an outdoor Motocross race.

  14. Accurate eikonal-curvature relation for wave fronts in locally anisotropic reaction-diffusion systems.

    Science.gov (United States)

    Dierckx, Hans; Bernus, Olivier; Verschelde, Henri

    2011-09-02

    The dependency of wave velocity in reaction-diffusion (RD) systems on the local front curvature determines not only the stability of wave propagation, but also the fundamental properties of other spatial configurations such as vortices. This Letter gives the first derivation of a covariant eikonal-curvature relation applicable to general RD systems with spatially varying anisotropic diffusion properties, such as cardiac tissue. The theoretical prediction that waves which seem planar can nevertheless possess a nonvanishing geometrical curvature induced by local anisotropy is confirmed by numerical simulations, which reveal deviations up to 20% from the nominal plane wave speed.

  15. Hand movements classification for myoelectric control system using adaptive resonance theory.

    Science.gov (United States)

    Jahani Fariman, H; Ahmad, Siti A; Hamiruce Marhaban, M; Alijan Ghasab, M; Chappell, Paul H

    2016-03-01

    This research proposes an exploratory study of a simple, accurate, and computationally efficient movement classification technique for prosthetic hand application. Surface myoelectric signals were acquired from the four muscles, namely, flexor carpi ulnaris, extensor carpi radialis, biceps brachii, and triceps brachii, of four normal-limb subjects. The signals were segmented, and the features were extracted with a new combined time-domain feature extraction method. Fuzzy C-means clustering method and scatter plot were used to evaluate the performance of the proposed multi-feature versus Hudgins' multi-feature. The movements were classified with a hybrid Adaptive Resonance Theory-based neural network. Comparative results indicate that the proposed hybrid classifier not only has good classification accuracy (89.09%) but also a significantly improved computation time.

  16. A Polymer Visualization System with Accurate Heating and Cooling Control and High-Speed Imaging

    Directory of Open Access Journals (Sweden)

    Anson Wong

    2015-04-01

    Full Text Available A visualization system to observe crystal and bubble formation in polymers under high temperature and pressure has been developed. Using this system, polymer can be subjected to a programmable thermal treatment to simulate the process in high pressure differential scanning calorimetry (HPDSC. With a high-temperature/high-pressure view-cell unit, this system enables in situ observation of crystal formation in semi-crystalline polymers to complement thermal analyses with HPDSC. The high-speed recording capability of the camera not only allows detailed recording of crystal formation, it also enables in situ capture of plastic foaming processes with a high temporal resolution. To demonstrate the system’s capability, crystal formation and foaming processes of polypropylene/carbon dioxide systems were examined. It was observed that crystals nucleated and grew into spherulites, and they grew at faster rates as temperature decreased. This observation agrees with the crystallinity measurement obtained with the HPDSC. Cell nucleation first occurred at crystals’ boundaries due to CO2 exclusion from crystal growth fronts. Subsequently, cells were nucleated around the existing ones due to tensile stresses generated in the constrained amorphous regions between networks of crystals.

  17. Accurate parameters of the oldest known rocky-exoplanet hosting system: Kepler-10 revisited

    Energy Technology Data Exchange (ETDEWEB)

    Fogtmann-Schulz, Alexandra; Hinrup, Brian; Van Eylen, Vincent; Christensen-Dalsgaard, Jørgen; Kjeldsen, Hans; Silva Aguirre, Víctor; Tingley, Brandon, E-mail: alfosc@phys.au.dk [Stellar Astrophysics Centre, Department of Physics and Astronomy, Aarhus University, Ny Munkegade 120, DK-8000 Aarhus C (Denmark)

    2014-02-01

    Since the discovery of Kepler-10, the system has received considerable interest because it contains a small, rocky planet which orbits the star in less than a day. The system's parameters, announced by the Kepler team and subsequently used in further research, were based on only five months of data. We have reanalyzed this system using the full span of 29 months of Kepler photometric data, and obtained improved information about its star and the planets. A detailed asteroseismic analysis of the extended time series provides a significant improvement on the stellar parameters: not only can we state that Kepler-10 is the oldest known rocky-planet-harboring system at 10.41 ± 1.36 Gyr, but these parameters combined with improved planetary parameters from new transit fits gives us the radius of Kepler-10b to within just 125 km. A new analysis of the full planetary phase curve leads to new estimates on the planetary temperature and albedo, which remain degenerate in the Kepler band. Our modeling suggests that the flux level during the occultation is slightly lower than at the transit wings, which would imply that the nightside of this planet has a non-negligible temperature.

  18. Accurate parameters of the oldest known rocky-exoplanet hosting system: Kepler-10 revisited

    CERN Document Server

    Fogtmann-Schulz, Alexandra; Van Eylen, Vincent; Christensen-Dalsgaard, Jørgen; Kjeldsen, Hans; Aguirre, Víctor Silva; Tingley, Brandon

    2013-01-01

    Since the discovery of Kepler-10, the system has received considerable interest because it contains a small, rocky planet which orbits the star in less than a day. The system's parameters, announced by the Kepler team and subsequently used in further research, were based on only 5 months of data. We have reanalyzed this system using the full span of 29 months of Kepler photometric data, and obtained improved information about its star and the planets. A detailed asteroseismic analysis of the extended time series provides a significant improvement on the stellar parameters: Not only can we state that Kepler-10 is the oldest known rocky-planet-harboring system at 10.41 +/- 1.36 Gyr, but these parameters combined with improved planetary parameters from new transit fits gives us the radius of Kepler-10b to within just 125 km. A new analysis of the full planetary phase curve leads to new estimates on the planetary temperature and albedo, which remain degenerate in the Kepler band. Our modeling suggests that the fl...

  19. Structure and contents of layered classification system of digital geomorphology for China

    Institute of Scientific and Technical Information of China (English)

    CHENG Weiming; ZHOU Chenghu; LI Bingyuan; SHEN Yuancun; ZHANG Baiping

    2011-01-01

    This paper presents the structure and contents of a standardized layered classification system of digital geomorphology for China.This digital classification method combines landforms characteristics of morphology with genesis.A total of 15 categories of exogenic and endogenic forces are divided into two broad categories:morpho-genetic and morpho-structural landforms.Polygon patches are used to manage the morpho-genetic types,and solitary points,lines and polygons are used to manage the morpho-structural types.The classification method of digital morpho-genetic types can be divided into seven layers,i.e.basic morphology and altitude,genesis,sub-genesis,morphology,micro-morphology,slope and aspect,material and lithology.The method proposes combinations of matrix forms based on layered indicators.The attributes of every landform types are obtained from all or some of the seven layers.For the 15 forces categories,some classification indicators and calculation methods are presented for the basic morphology,the morphologic and sub-morphologic landforms of the morpho-genetic types.The solitary polygon,linear and point types of morpho-structural landforms are presented respectively.The layered classification method can meet the demands of scale-span geomorphologic mapping for the national primary scales from 1:500,000 to 1:1,000,000.The layers serve as classification indicators,and therefore can be added and reduced according to mapping demands,providing flexible expandability.

  20. International Society Of Neuropathology--Haarlem consensus guidelines for nervous system tumor classification and grading.

    Science.gov (United States)

    Louis, David N; Perry, Arie; Burger, Peter; Ellison, David W; Reifenberger, Guido; von Deimling, Andreas; Aldape, Kenneth; Brat, Daniel; Collins, V Peter; Eberhart, Charles; Figarella-Branger, Dominique; Fuller, Gregory N; Giangaspero, Felice; Giannini, Caterina; Hawkins, Cynthia; Kleihues, Paul; Korshunov, Andrey; Kros, Johan M; Beatriz Lopes, M; Ng, Ho-Keung; Ohgaki, Hiroko; Paulus, Werner; Pietsch, Torsten; Rosenblum, Marc; Rushing, Elisabeth; Soylemezoglu, Figen; Wiestler, Otmar; Wesseling, Pieter

    2014-09-01

    Major discoveries in the biology of nervous system tumors have raised the question of how non-histological data such as molecular information can be incorporated into the next World Health Organization (WHO) classification of central nervous system tumors. To address this question, a meeting of neuropathologists with expertise in molecular diagnosis was held in Haarlem, the Netherlands, under the sponsorship of the International Society of Neuropathology (ISN). Prior to the meeting, participants solicited input from clinical colleagues in diverse neuro-oncological specialties. The present "white paper" catalogs the recommendations of the meeting, at which a consensus was reached that incorporation of molecular information into the next WHO classification should follow a set of provided "ISN-Haarlem" guidelines. Salient recommendations include that (i) diagnostic entities should be defined as narrowly as possible to optimize interobserver reproducibility, clinicopathological predictions and therapeutic planning; (ii) diagnoses should be "layered" with histologic classification, WHO grade and molecular information listed below an "integrated diagnosis"; (iii) determinations should be made for each tumor entity as to whether molecular information is required, suggested or not needed for its definition; (iv) some pediatric entities should be separated from their adult counterparts; (v) input for guiding decisions regarding tumor classification should be solicited from experts in complementary disciplines of neuro-oncology; and (iv) entity-specific molecular testing and reporting formats should be followed in diagnostic reports. It is hoped that these guidelines will facilitate the forthcoming update of the fourth edition of the WHO classification of central nervous system tumors.

  1. Priming Effects Associated with the Hierarchical Levels of Classification Systems

    Science.gov (United States)

    Loehrlein, Aaron J.

    2012-01-01

    The act of categorization produces conceptual representations in memory while knowledge organization (KO) systems provide conceptual representations that are used in information storage and retrieval systems. Previous research has explored how KO systems can be designed to resemble the user's internal conceptual structures. However, the more…

  2. Priming Effects Associated with the Hierarchical Levels of Classification Systems

    Science.gov (United States)

    Loehrlein, Aaron J.

    2012-01-01

    The act of categorization produces conceptual representations in memory while knowledge organization (KO) systems provide conceptual representations that are used in information storage and retrieval systems. Previous research has explored how KO systems can be designed to resemble the user's internal conceptual structures. However, the more…

  3. Evaluation of a low-cost and accurate ocean temperature logger on subsurface mooring systems

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Chuan; Deng, Zhiqun; Lu, Jun; Xu, Xiaoyang; Zhao, Wei; Xu, Ming

    2014-06-23

    Monitoring seawater temperature is important to understanding evolving ocean processes. To monitor internal waves or ocean mixing, a large number of temperature loggers are typically mounted on subsurface mooring systems to obtain high-resolution temperature data at different water depths. In this study, we redesigned and evaluated a compact, low-cost, self-contained, high-resolution and high-accuracy ocean temperature logger, TC-1121. The newly designed TC-1121 loggers are smaller, more robust, and their sampling intervals can be automatically changed by indicated events. They have been widely used in many mooring systems to study internal wave and ocean mixing. The logger’s fundamental design, noise analysis, calibration, drift test, and a long-term sea trial are discussed in this paper.

  4. Accurate DOSY measure of out-of-equilibrium systems by permutated DOSY (p-DOSY)

    CERN Document Server

    Oikonomou, Maria; Velders, Aldrik H; Delsuc, Marc-André

    2015-01-01

    NMR spectroscopy is a perfect tool for monitoring in-situ chemical reactions. In particular, DOSY measurement is well suited to characterize transient species by the determination of their sizes. However, here we bring to light a difficulty in the DOSY experiments performed on out-of-equilibrium systems. On such a system, the evolution of the concentration of species interferes with the measurement process, and creates a bias on the diffusion coefficient determination that may lead to erroneous interpretations. We show that a random permutation of the series of gradient strengths used during the DOSY experiment allows to average out this bias. This approach, that we name p-DOSY does not require changes in the the pulse sequences nor in the processing software, and restores completely the full accuracy of the measure. This technique is demonstrated on the monitoring of the anomerization reaction of $\\alpha$ to $\\beta$ glucose.

  5. Accurate 2D/3D electromagnetic modeling for time-domain airborne EM systems

    Science.gov (United States)

    Yin, C.; Hodges, G.

    2012-12-01

    The existing industry software cannot deliver correct results for 3D time-domain airborne EM responses. In this paper, starting from the Fourier transform and convolution, we compare the stability of different modeling techniques and analyze the reason for instable calculations of the time-domain airborne EM responses. We find that the singularity of the impulse responses of EM systems at very early time that are used in the convolution is responsible for the instability of the modeling (Fig.1). Based on this finding, we put forward an algorithm that uses step response rather than impulse response of the airborne EM system for the convolution and create a stable algorithm that delivers precise results and maintains well the integral/derivative relationship between the magnetic field B and the magnetic induction dB/dt. A three-step transformation procedure for the modeling is proposed: 1) output the frequency-domain EM response data from the existing software; 2) transform into step-response by digital Fourier/Hankel transform; 3) convolve the step response with the transmitting current or its derivatives. The method has proved to be working very well (Fig. 2). The algorithm can be extended to the modeling of other time-domain ground and airborne EM system responses.Fig. 1: Comparison of impulse and step responses for an airborne EM system Fig. 2: Bz and dBz/dt calculated from step (middle panel) and impulse responses (lower panel) for the same 3D model as in Fig.1.

  6. Scalable and Accurate SMT-based Model Checking of Data Flow Systems

    Science.gov (United States)

    2013-10-30

    serving the needs of the core Kind 1 user base, which includes users at Universities (Iowa, Minnesota), governmental agencies (NASA, Onera ) and...extensively by researchers at Rockwell-Collins; the University of Minnesota; NASA, Ames; Verimag, a French research center in embedded system; ONERA , a French...The initial results obtained in this project inspired a collaboration with ONERA which re- sulted in a year long visit to Iowa by one of their

  7. Accurate numerical schemes for approximating initial-boundary value problems for systems of conservation laws

    CERN Document Server

    Mishra, Siddhartha

    2011-01-01

    Solutions of initial-boundary value problems for systems of conservation laws depend on the underlying viscous mechanism, namely different viscosity operators lead to different limit solutions. Standard numerical schemes for approximating conservation laws do not take into account this fact and converge to solutions that are not necessarily physically relevant. We design numerical schemes that incorporate explicit information about the underlying viscosity mechanism and approximate the physically relevant solution. Numerical experiments illustrating the robust performance of these schemes are presented.

  8. Data Processing And Machine Learning Methods For Multi-Modal Operator State Classification Systems

    Science.gov (United States)

    Hearn, Tristan A.

    2015-01-01

    This document is intended as an introduction to a set of common signal processing learning methods that may be used in the software portion of a functional crew state monitoring system. This includes overviews of both the theory of the methods involved, as well as examples of implementation. Practical considerations are discussed for implementing modular, flexible, and scalable processing and classification software for a multi-modal, multi-channel monitoring system. Example source code is also given for all of the discussed processing and classification methods.

  9. Open Fractures of the Hand: Review of Pathogenesis and Introduction of a New Classification System.

    Science.gov (United States)

    Tulipan, Jacob E; Ilyas, Asif M

    2016-01-01

    Open fractures of the hand are a common and varied group of injuries. Although at increased risk for infection, open fractures of the hand are more resistant to infection than other open fractures. Numerous unique factors in the hand may play a role in the altered risk of postinjury infection. Current systems for the classification of open fractures fail to address the unique qualities of the hand. This article proposes a novel classification system for open fractures of the hand, taking into account the factors unique to the hand that affect its risk for developing infection after an open fracture.

  10. Accurate dose assessment system for an exposed person utilising radiation transport calculation codes in emergency response to a radiological accident.

    Science.gov (United States)

    Takahashi, F; Shigemori, Y; Seki, A

    2009-01-01

    A system has been developed to assess radiation dose distribution inside the body of exposed persons in a radiological accident by utilising radiation transport calculation codes-MCNP and MCNPX. The system consists mainly of two parts, pre-processor and post-processor of the radiation transport calculation. Programs for the pre-processor are used to set up a 'problem-dependent' input file, which defines the accident condition and dosimetric quantities to be estimated. The program developed for the post-processor part can effectively indicate dose information based upon the output file of the code. All of the programs in the dosimetry system can be executed with a generally used personal computer and accurately give the dose profile to an exposed person in a radiological accident without complicated procedures. An experiment using a physical phantom was carried out to verify the availability of the dosimetry system with the developed programs in a gamma ray irradiation field.

  11. A simple and accurate grading system for orthoiodohippurate renal scans in the assessment of post-transplant renal function

    Energy Technology Data Exchange (ETDEWEB)

    Zaki, S.K.; Bretan, P.N.; Go, R.T.; Rehm, P.K.; Streem, S.B.; Novick, A.C. (Cleveland Clinic Foundation, OH (USA))

    1990-06-01

    Orthoiodohippurate renal scanning has proved to be a reliable, noninvasive method for the evaluation and followup of renal allograft function. However, a standardized system for grading renal function with this test is not available. We propose a simple grading system to distinguish the different functional phases of hippurate scanning in renal transplant recipients. This grading system was studied in 138 patients who were evaluated 1 week after renal transplantation. There was a significant correlation between the isotope renographic functional grade and clinical correlates of allograft function such as the serum creatinine level (p = 0.0001), blood urea nitrogen level (p = 0.0001), urine output (p = 0.005) and need for hemodialysis (p = 0.007). We recommend this grading system as a simple and accurate method to interpret orthoiodohippurate renal scans in the evaluation and followup of renal allograft recipients.

  12. When do perturbative approaches accurately capture the dynamics of complex quantum systems?

    Science.gov (United States)

    Fruchtman, Amir; Lambert, Neill; Gauger, Erik M.

    2016-06-01

    Understanding the dynamics of higher-dimensional quantum systems embedded in a complex environment remains a significant theoretical challenge. While several approaches yielding numerically converged solutions exist, these are computationally expensive and often provide only limited physical insight. Here we address the question: when do more intuitive and simpler-to-compute second-order perturbative approaches provide adequate accuracy? We develop a simple analytical criterion and verify its validity for the case of the much-studied FMO dynamics as well as the canonical spin-boson model.

  13. Accurate and Simple Time Synchronization and Frequency Offset Correction in OFDM System

    Institute of Scientific and Technical Information of China (English)

    LIU Xiao-ming; JIANG Wei-yu; LIU Yuan-an

    2004-01-01

    We present a new synchronization scheme for Orthogonal Frequency-Division Multiplexing (OFDM) systems. In this scheme, time synchronization and carrier frequency offset correction can be performed in one identical training symbol. Time synchronization algorithm is robust and simple operated, and its performance is independent of the carrier frequency offset. We derive the theoretical variance error for our time synchronization algorithm in AWGN channel. We also derive the performance lower bound of our frequency offset correction algorithm. The frequency offset correction algorithm is high accuracy and its performance will degrade very little under multipath fading environment.

  14. Documentation of pharmaceutical care: development of an intervention oriented classification system.

    Science.gov (United States)

    Maes, Karen A; Bruch, Sophia; Hersberger, Kurt E; Lampert, Markus L

    2017-04-01

    Background A standardised classification system of pharmaceutical interventions (PI) is in use in several Swiss hospitals, whereas none exists for community pharmacies to date. To promote information exchange between both settings, a compatible structure of the classification system is needed. Objective To develop an intervention oriented classification system for community pharmacies named PharmDISC based on the hospital system; to test it on interrater reliability, appropriateness, interpretability, and face and content validity; to assess pharmacists' opinions. Setting Seventy-seven Swiss community pharmacies. Method Based on previous studies, a modified classification system was developed. Fifth-year pharmacy students (n = 77) received a two-hour training and classified three model PIs with which Fleiss-Kappa coefficients K were calculated to determine interrater reliability. In the community pharmacies, each student consecutively collected ten prescriptions that required a PI. A focus group interview was conducted with pharmacists (n = 9). The anonymised transcript was analysed using thematic analysis. Main outcome measure Number of classified PIs, interrater reliability, pharmacists' opinion/suggestions. Results The classification system includes 5 categories and 52 subcategories. Most of the 725 PIs (94.6%) were completely classified. The PharmDISC system reached an overall substantial user agreement (K = 0.61). Despite some points for optimisation, the pharmacists were satisfied with the PharmDISC system. They recognised the importance of PI documentation and believed that this may allow traceability, facilitate communication within the team and other healthcare professionals, and increase quality of care. Conclusion The PharmDISC system was valid and reached substantial interrater reliability. Refinement based on the pharmacists' suggestions resulted in a final version to be tested in an observational study with community pharmacists.

  15. Why Build Dewey Numbers? The Remediation of the Dewey Decimal Classification System

    Directory of Open Access Journals (Sweden)

    Tore Brattli

    2012-10-01

    Full Text Available Correct Dewey classification is demanding and time consuming. Many of the challenges with the Dewey system are related to locating and interpreting notes (i.e. classification guidelines, and number building. Today’s Dewey structure is a result of more than 100 years of optimizing a comprehensive classification system to the printed book medium. In order to limit the system into a “manageable” size, facets and facet-like subjects are represented only once and instead referred to from relevant classes for number building. A similar technique is used to reduce the number of notes. With the remediation of Dewey from printed to computer media, space is not limited and there is no need to compress the classification system. Number building can be eliminated, and all relevant notes attached to each class. Despite the fact that the system now has been available in electronic form for almost 20 years, it is still largely a copy of the printed version. This article first investigates how the Dewey system may be presented for users without number building, in order to make it more immediate and user-friendly. We first analyze the Dewey structure, and then look at different representations of the structure suited for computer media. Finally, some ideas for a new presentation without number building are proposed.

  16. SPARC: Accurate and efficient finite-difference formulation and parallel implementation of Density Functional Theory: Extended systems

    Science.gov (United States)

    Ghosh, Swarnava; Suryanarayana, Phanish

    2017-07-01

    As the second component of SPARC (Simulation Package for Ab-initio Real-space Calculations), we present an accurate and efficient finite-difference formulation and parallel implementation of Density Functional Theory (DFT) for extended systems. Specifically, employing a local formulation of the electrostatics, the Chebyshev polynomial filtered self-consistent field iteration, and a reformulation of the non-local force component, we develop a finite-difference framework wherein both the energy and atomic forces can be efficiently calculated to within desired accuracies in DFT. We demonstrate using a wide variety of materials systems that SPARC achieves high convergence rates in energy and forces with respect to spatial discretization to reference plane-wave result; exponential convergence in energies and forces with respect to vacuum size for slabs and wires; energies and forces that are consistent and display negligible 'egg-box' effect; accurate properties of crystals, slabs, and wires; and negligible drift in molecular dynamics simulations. We also demonstrate that the weak and strong scaling behavior of SPARC is similar to well-established and optimized plane-wave implementations for systems consisting up to thousands of electrons, but with a significantly reduced prefactor. Overall, SPARC represents an attractive alternative to plane-wave codes for performing DFT simulations of extended systems.

  17. Structural adjustment for accurate conditioning in large-scale subsurface systems

    Science.gov (United States)

    Tahmasebi, Pejman

    2017-03-01

    Most of the current subsurface simulation approaches consider a priority list for honoring the well and any other auxiliary data, and eventually adopt a middle ground between the quality of the model and conditioning it to hard data. However, as the number of datasets increases, such methods often produce undesirable features in the subsurface model. Due to their high flexibility, subsurface modeling based on training images (TIs) is becoming popular. Providing comprehensive TIs remains, however, an outstanding problem. In addition, identifying a pattern similar to those in the TI that honors the well and other conditioning data is often difficult. Moreover, the current subsurface modeling approaches do not account for small perturbations that may occur in a subsurface system. Such perturbations are active in most of the depositional systems. In this paper, a new methodology is presented that is based on an irregular gridding scheme that accounts for incomplete TIs and minor offsets. Use of the methodology enables one to use a small or incomplete TI and adaptively change the patterns in the simulation grid in order to simultaneously honor the well data and take into account the effect of the local offsets. Furthermore, the proposed method was used on various complex process-based models and their structures are deformed for matching with the conditioning point data. The accuracy and robustness of the proposed algorithm are successfully demonstrated by applying it to models of several complex examples.

  18. An Improved Brain Tumour Classification System using Wavelet Transform and Neural Network.

    Science.gov (United States)

    Dhas, DAS; Madheswaran, M

    2015-06-09

    An improved brain tumour classification system using wavelet transform and neural network is developed and presented in this paper. The anisotropic diffusion filter is used for image denoising and the performance of oriented rician noise reducing anisotropic diffusion (ORNRAD) filter is validated. The segmentation of the denoised image is carried out by Fuzzy C-means clustering. The features are extracted using Symlet and Coiflet Wavelet transform and Levenberg Marquardt algorithm based neural network is used to classify the magnetic resonance imaging (MRI) images. This MRI classification technique is tested and analysed with the existing methodologies and its performance is found to be satisfactory with a classification accuracy of 93.02%. The developed system can assist the physicians for classifying the MRI images for better decision-making.

  19. Stygoregions – a promising approach to a bioregional classification of groundwater systems

    Science.gov (United States)

    Stein, Heide; Griebler, Christian; Berkhoff, Sven; Matzke, Dirk; Fuchs, Andreas; Hahn, Hans Jürgen

    2012-01-01

    Linked to diverse biological processes, groundwater ecosystems deliver essential services to mankind, the most important of which is the provision of drinking water. In contrast to surface waters, ecological aspects of groundwater systems are ignored by the current European Union and national legislation. Groundwater management and protection measures refer exclusively to its good physicochemical and quantitative status. Current initiatives in developing ecologically sound integrative assessment schemes by taking groundwater fauna into account depend on the initial classification of subsurface bioregions. In a large scale survey, the regional and biogeographical distribution patterns of groundwater dwelling invertebrates were examined for many parts of Germany. Following an exploratory approach, our results underline that the distribution patterns of invertebrates in groundwater are not in accordance with any existing bioregional classification system established for surface habitats. In consequence, we propose to develope a new classification scheme for groundwater ecosystems based on stygoregions. PMID:22993698

  20. Improved image quality in pinhole SPECT by accurate modeling of the point spread function in low magnification systems

    Energy Technology Data Exchange (ETDEWEB)

    Pino, Francisco [Unitat de Biofísica, Facultat de Medicina, Universitat de Barcelona, Barcelona 08036, Spain and Servei de Física Mèdica i Protecció Radiològica, Institut Català d’Oncologia, L’Hospitalet de Llobregat 08907 (Spain); Roé, Nuria [Unitat de Biofísica, Facultat de Medicina, Universitat de Barcelona, Barcelona 08036 (Spain); Aguiar, Pablo, E-mail: pablo.aguiar.fernandez@sergas.es [Fundación Ramón Domínguez, Complexo Hospitalario Universitario de Santiago de Compostela 15706, Spain and Grupo de Imagen Molecular, Instituto de Investigacións Sanitarias de Santiago de Compostela (IDIS), Galicia 15782 (Spain); Falcon, Carles; Ros, Domènec [Institut d’Investigacions Biomèdiques August Pi i Sunyer (IDIBAPS), Barcelona 08036, Spain and CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Barcelona 08036 (Spain); Pavía, Javier [Institut d’Investigacions Biomèdiques August Pi i Sunyer (IDIBAPS), Barcelona 080836 (Spain); CIBER en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Barcelona 08036 (Spain); and Servei de Medicina Nuclear, Hospital Clínic, Barcelona 08036 (Spain)

    2015-02-15

    Purpose: Single photon emission computed tomography (SPECT) has become an important noninvasive imaging technique in small-animal research. Due to the high resolution required in small-animal SPECT systems, the spatially variant system response needs to be included in the reconstruction algorithm. Accurate modeling of the system response should result in a major improvement in the quality of reconstructed images. The aim of this study was to quantitatively assess the impact that an accurate modeling of spatially variant collimator/detector response has on image-quality parameters, using a low magnification SPECT system equipped with a pinhole collimator and a small gamma camera. Methods: Three methods were used to model the point spread function (PSF). For the first, only the geometrical pinhole aperture was included in the PSF. For the second, the septal penetration through the pinhole collimator was added. In the third method, the measured intrinsic detector response was incorporated. Tomographic spatial resolution was evaluated and contrast, recovery coefficients, contrast-to-noise ratio, and noise were quantified using a custom-built NEMA NU 4–2008 image-quality phantom. Results: A high correlation was found between the experimental data corresponding to intrinsic detector response and the fitted values obtained by means of an asymmetric Gaussian distribution. For all PSF models, resolution improved as the distance from the point source to the center of the field of view increased and when the acquisition radius diminished. An improvement of resolution was observed after a minimum of five iterations when the PSF modeling included more corrections. Contrast, recovery coefficients, and contrast-to-noise ratio were better for the same level of noise in the image when more accurate models were included. Ring-type artifacts were observed when the number of iterations exceeded 12. Conclusions: Accurate modeling of the PSF improves resolution, contrast, and recovery

  1. Wi-GIM system: a new wireless sensor network (WSN) for accurate ground instability monitoring

    Science.gov (United States)

    Mucchi, Lorenzo; Trippi, Federico; Schina, Rosa; Fornaciai, Alessandro; Gigli, Giovanni; Nannipieri, Luca; Favalli, Massimiliano; Marturia Alavedra, Jordi; Intrieri, Emanuele; Agostini, Andrea; Carnevale, Ennio; Bertolini, Giovanni; Pizziolo, Marco; Casagli, Nicola

    2016-04-01

    Landslides are among the most serious and common geologic hazards around the world. Their impact on human life is expected to increase in the next future as a consequence of human-induced climate change as well as the population growth in proximity of unstable slopes. Therefore, developing better performing technologies for monitoring landslides and providing local authorities with new instruments able to help them in the decision making process, is becoming more and more important. The recent progresses in Information and Communication Technologies (ICT) allow us to extend the use of wireless technologies in landslide monitoring. In particular, the developments in electronics components have permitted to lower the price of the sensors and, at the same time, to actuate more efficient wireless communications. In this work we present a new wireless sensor network (WSN) system, designed and developed for landslide monitoring in the framework of EU Wireless Sensor Network for Ground Instability Monitoring - Wi-GIM project (LIFE12 ENV/IT/001033). We show the preliminary performance of the Wi-GIM system after the first period of monitoring on the active Roncovetro Landslide and on a large subsiding area in the neighbourhood of Sallent village. The Roncovetro landslide is located in the province of Reggio Emilia (Italy) and moved an inferred volume of about 3 million cubic meters. Sallent village is located at the centre of the Catalan evaporitic basin in Spain. The Wi-GIM WSN monitoring system consists of three levels: 1) Master/Gateway level coordinates the WSN and performs data aggregation and local storage; 2) Master/Server level takes care of acquiring and storing data on a remote server; 3) Nodes level that is based on a mesh of peripheral nodes, each consisting in a sensor board equipped with sensors and wireless module. The nodes are located in the landslide ground perimeter and are able to create an ad-hoc WSN. The location of each sensor on the ground is

  2. Computing Isolated Singular Solutions of Polynomial Systems Accurately: Case of Breadth One

    CERN Document Server

    Li, Nan

    2010-01-01

    We present a symbolic-numeric method to refine an approximate isolated singular solution $\\hat{\\mathbf{x}}=(\\hat{x}_{1}, \\ldots, \\hat{x}_{n})$ of a polynomial system $F=\\{f_1, \\ldots, f_n\\}$ when the Jacobian matrix of $F$ evaluated at $\\hat{\\mathbf{x}}$ has corank one approximately. Our new approach is based on the regularized Newton iteration and the computation of approximate Max Noether conditions satisfied at the singular solution. The size of matrices involved in our algorithm is bounded by $n \\times n$ and the algorithm converges quadratically if $\\hat{\\xx}$ is near the exact singular solution. The method has been implemented in Maple and can deal with both regular singularities and irregular singularities.

  3. Accurate Methods for Signal Processing of Distorted Waveforms in Power Systems

    Directory of Open Access Journals (Sweden)

    A. Testa

    2007-01-01

    Full Text Available A primary problem in waveform distortion assessment in power systems is to examine ways to reduce the effects of spectral leakage. In the framework of DFT approaches, line frequency synchronization techniques or algorithms to compensate for desynchronization are necessary; alternative approaches such as those based on the Prony and ESPRIT methods are not sensitive to desynchronization, but they often require significant computational burden. In this paper, the signal processing aspects of the problem are considered; different proposals by the same authors regarding DFT-, Prony-, and ESPRIT-based advanced methods are reviewed and compared in terms of their accuracy and computational efforts. The results of several numerical experiments are reported and analysed; some of them are in accordance with IEC Standards, while others use more open scenarios.

  4. The numerical Laplace transform: An accurate technique for analyzing electromagnetic transients on power system devices

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, Pablo [Escuela Superior de Ingenieria Mecanica y Electrica, Instituto Politecnico Nacional (IPN), U.P. Adolfo Lopez Mateos, Av. I.P.N., Col. Lindavista, 07738 Mexico (Mexico); Uribe, Felipe A. [Centro Universitario de Ciencias Exactas e Ingenierias, Universidad de Guadalajara, Blvd. Marcelino Garcia Barragan 1421, Col. Universitaria, C.P. 44430 Guadalajara, Jal. (Mexico)

    2009-02-15

    A detailed description of the numerical Laplace transform (NLT) for electromagnetic transient calculation on power system devices under linear and non-linear conditions is presented in this paper. The development and main advantages of the NLT are reviewed, as compared to the conventional time domain simulation, including current practices for reducing numerical errors derived from data truncation and discretization of the analytical equations. A simple technique based on the superposition principle to include non-linear conditions in the frequency domain is also fully described. Besides, important results obtained recently with the NLT for different power components are presented, including comparisons with widely used time domain methods, such as the method of characteristics, and the professional simulation program EMTDC. Such comparisons reveal a high accuracy of the numerical Laplace transform when applied to the presented studies. (author)

  5. Misoprostol vaginal insert for induction of labor: a delivery system with accurate dosing and rapid discontinuation.

    Science.gov (United States)

    Stephenson, Megan L; Hawkins, J Seth; Powers, Barbara L; Wing, Deborah A

    2014-01-01

    Labor induction and cervical ripening are widely utilized and new methods are constantly being investigated. Prostaglandins have been shown to be effective labor induction agents and, in particular, were compared with other prostaglandin preparations; vaginal misoprostol used off-label was associated with reduced failure to achieve vaginal delivery. The challenge is to provide this medication with the correct dosing for this indication and with the ability to discontinue the medication if needed, all while ensuring essential maternal and neonatal safety. The misoprostol vaginal insert initiates cervical ripening using a delivery system that controls misoprostol release and can be rapidly removed. This article reviews the development, safety and efficacy of the misoprostol vaginal insert for induction of labor and cervical ripening, and will focus on vaginally administered prostaglandins.

  6. Limited Angle Torque Motors Having High Torque Density, Used in Accurate Drive Systems

    Directory of Open Access Journals (Sweden)

    R. Obreja

    2011-01-01

    Full Text Available A torque motor is a special electric motor that is able to develop the highest possible torque in a certain volume. A torque motor usually has a pancake configuration, and is directly jointed to a drive system (without a gear box. A limited angle torque motor is a torque motor that has no rotary electromagnetic field — in certain papers it is referred to as a linear electromagnet. The main intention of the authors for this paper is to present a means for analyzing and designing a limited angle torque motor only through the finite element method. Users nowadays require very high-performance limited angle torque motors with high density torque. It is therefore necessary to develop the highest possible torque in a relatively small volume. A way to design such motors is by using numerical methods based on the finite element method.

  7. Text Classification using Artificial Intelligence

    CERN Document Server

    Kamruzzaman, S M

    2010-01-01

    Text classification is the process of classifying documents into predefined categories based on their content. It is the automated assignment of natural language texts to predefined categories. Text classification is the primary requirement of text retrieval systems, which retrieve texts in response to a user query, and text understanding systems, which transform text in some way such as producing summaries, answering questions or extracting data. Existing supervised learning algorithms for classifying text need sufficient documents to learn accurately. This paper presents a new algorithm for text classification using artificial intelligence technique that requires fewer documents for training. Instead of using words, word relation i.e. association rules from these words is used to derive feature set from pre-classified text documents. The concept of na\\"ive Bayes classifier is then used on derived features and finally only a single concept of genetic algorithm has been added for final classification. A syste...

  8. A Novel System for Non-Invasive Method of Animal Tracking and Classification in Designated Area Using Intelligent Camera System

    Directory of Open Access Journals (Sweden)

    S. Matuska

    2016-04-01

    Full Text Available This paper proposed a novel system for non-invasive method of animal tracking and classification in designated area. The system is based on intelligent devices with cameras, which are situated in a designated area and a main computing unit (MCU acting as a system master. Intelligent devices track animals and then send data to MCU to evaluation. The main purpose of this system is detection and classification of moving animals in a designated area and then creation of migration corridors of wild animals. In the intelligent devices, background subtraction method and CAMShift algorithm are used to detect and track animals in the scene. Then, visual descriptors are used to create representation of unknown objects. In order to achieve the best accuracy in classification, key frame extraction method is used to filtrate an object from detection module. Afterwards, Support Vector Machine is used to classify unknown moving animals.

  9. Classification Criteria for Systemic Sclerosis: An ACR-EULAR Collaborative Initiative

    Science.gov (United States)

    van den Hoogen, Frank; Khanna, Dinesh; Fransen, Jaap; Johnson, Sindhu R.; Baron, Murray; Tyndall, Alan; Matucci-Cerinic, Marco; Naden, Raymond; Riemekasten, Gabriela; Carreira, Patricia; Gabrielli, Armando; Distler, Oliver; van Laar, Jacob M; Valentini, Gabriele; Denton, Christopher P; Kowal-Bielecka, Otylia; Inanc, Murat; Allanore, Yannick; Walker, Ulrich A; Müller-Ladner, Ulf; Vonk, Madelon; Czirjak, Laszlo; Herrick, Ariane; Sierakowski, Stanislav; Veale, Douglas; Chung, Lorinda; Clements, Phillip; Fessler, Barry J; Furst, Dan; Guiducci, Serena; Hsu, Vivian; Mayes, Maureen; Medsger, Thomas A; Merkel, Peter; Silver, Richard; Steen, Virginia; Varga, John; Collier, David; Csuka, Mary Ell; Jimenez, Sergio; Kahaleh, Bashar; Seibold, James R; Simms, Robert; Pope, Janet

    2013-01-01

    Background The 1980 classification criteria for systemic sclerosis (SSc) lack sensitivity in early SSc and limited cutaneous SSc. A joint ACR-EULAR committee was established to develop new classification criteria for SSc. Methods Using consensus methods, 23 candidate items were arranged in a multi-criteria additive point system with a threshold to classify cases as SSc. The classification system was reduced by clustering items, and simplifying weights. The system was tested by: a) determining specificity and sensitivity in SSc cases and controls with scleroderma-like disorders; b) validating against the combined view of a group of experts on a set of cases with or without SSc. Results Skin thickening of the fingers extending proximal to the MCPs is sufficient to be classified as SSc, if that is not present, seven additive items apply with varying weights for each: skin thickening of the fingers, finger tip lesions, telangiectasia, abnormal nailfold capillaries, interstitial lung disease or pulmonary arterial hypertension, Raynaud's phenomenon, and SSc-related autoantibodies. Sensitivity and specificity in the validation sample were 0.91 and 0.92 for the new classification criteria and 0.75 and 0.72 for the 1980 ARA classification criteria. All selected cases were classified in accordance with consensus-based expert opinion. All cases classified as SSc by the 1980 ARA criteria were classified with the new criteria, and several additional cases were now considered to be SSc. Conclusion The ACR-EULAR classification criteria for SSc performed better than the 1980 ARA Criteria for SSc and should allow for more patients to be classified correctly as SSc. PMID:24122180

  10. Evolution and classification of the CRISPR-Cas systems

    NARCIS (Netherlands)

    Makarova, K.S.; Brouns, S.J.J.; Oost, van der J.

    2011-01-01

    The CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR-associated proteins) modules are adaptive immunity systems that are present in many archaea and bacteria. These defence systems are encoded by operons that have an extraordinarily diverse architecture and a high rate of

  11. Evolution and classification of the CRISPR-Cas systems

    NARCIS (Netherlands)

    Makarova, K.S.; Brouns, S.J.J.; Oost, van der J.

    2011-01-01

    The CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR-associated proteins) modules are adaptive immunity systems that are present in many archaea and bacteria. These defence systems are encoded by operons that have an extraordinarily diverse architecture and a high rate of

  12. Campus Information Systems for Students: Classification in Spain

    Science.gov (United States)

    Cobarsi, Josep; Bernardo, Merce; Coenders, Germa

    2008-01-01

    Purpose: First, this article seeks to establish a conceptual model for campus information systems for students, in order to make their comparison possible for strategic management purposes. Second, it seeks to test this conceptual model in a fieldwork on Spanish higher education institutions, in order to relate information systems characteristics…

  13. Sensor network based vehicle classification and license plate identification system

    Energy Technology Data Exchange (ETDEWEB)

    Frigo, Janette Rose [Los Alamos National Laboratory; Brennan, Sean M [Los Alamos National Laboratory; Rosten, Edward J [Los Alamos National Laboratory; Raby, Eric Y [Los Alamos National Laboratory; Kulathumani, Vinod K [WEST VIRGINIA UNIV.

    2009-01-01

    Typically, for energy efficiency and scalability purposes, sensor networks have been used in the context of environmental and traffic monitoring applications in which operations at the sensor level are not computationally intensive. But increasingly, sensor network applications require data and compute intensive sensors such video cameras and microphones. In this paper, we describe the design and implementation of two such systems: a vehicle classifier based on acoustic signals and a license plate identification system using a camera. The systems are implemented in an energy-efficient manner to the extent possible using commercially available hardware, the Mica motes and the Stargate platform. Our experience in designing these systems leads us to consider an alternate more flexible, modular, low-power mote architecture that uses a combination of FPGAs, specialized embedded processing units and sensor data acquisition systems.

  14. Accurate Arabic Script Language/Dialect Classification

    Science.gov (United States)

    2014-01-01

    dialects. language identification, Arabic, dialect, natural language processing, machine learning 30 Stephen C. Tratz 301-394-1057Unclassified...Arabic, Farsi, Urdu), Cyrillic script (Bulgarian, Russian, Ukrainian), and Devanagari script ( Hindi , Marathi, Nepali). They use Mechanical Turk to...to 1, which can be a useful feature. The Java port of the LIBLINEAR (Fan et al., 2008) machine learning software package1 is used to train all our

  15. Arrhythmia Classification Based on Multi-Domain Feature Extraction for an ECG Recognition System

    Directory of Open Access Journals (Sweden)

    Hongqiang Li

    2016-10-01

    Full Text Available Automatic recognition of arrhythmias is particularly important in the diagnosis of heart diseases. This study presents an electrocardiogram (ECG recognition system based on multi-domain feature extraction to classify ECG beats. An improved wavelet threshold method for ECG signal pre-processing is applied to remove noise interference. A novel multi-domain feature extraction method is proposed; this method employs kernel-independent component analysis in nonlinear feature extraction and uses discrete wavelet transform to extract frequency domain features. The proposed system utilises a support vector machine classifier optimized with a genetic algorithm to recognize different types of heartbeats. An ECG acquisition experimental platform, in which ECG beats are collected as ECG data for classification, is constructed to demonstrate the effectiveness of the system in ECG beat classification. The presented system, when applied to the MIT-BIH arrhythmia database, achieves a high classification accuracy of 98.8%. Experimental results based on the ECG acquisition experimental platform show that the system obtains a satisfactory classification accuracy of 97.3% and is able to classify ECG beats efficiently for the automatic identification of cardiac arrhythmias.

  16. COMBINED SYSTEMS OF ENERGY GENERATION – A CHARACTERISATION AND CLASSIFICATION

    Directory of Open Access Journals (Sweden)

    Jan Gilewski

    2014-09-01

    Full Text Available The study presents issues concerning technical solutions of combined systems of energy generation which can be used primarily in low-level power plants, installed in various types of public utility sites. A detailed description is given of selected ways of powering combined energy generation systems, presenting conceptual outlines of their operation and information on their advantages, disadvantages and applications. The following systems are introduced: gas-steam, back-pressure steam turbine, extraction-condensing steam turbine, gas turbine, gas microturbine, Stirling engine, fuel cells and internal combustion piston engine. Moreover, the study addresses economic aspects of energy generation in combined systems, discussing different methodologies of cost calculation, including the one used by the European Union. The article also gives a detailed review of piston engine combined-system aggregates available in the Polish market. Type series of associated systems designed for low-power appliances are shown, produced by Polish and foreign companies such as Viessmann, Centrum Elektroniki Stosowanej CES, H. Cegielski – Poznań, KWE Technika Energetyczna, TEDOM Poland or the EPS System.

  17. Experimental proposal for accurate determination of the phase relaxation time in highly excited quantum many-body systems

    CERN Document Server

    Bienert, M; Kun, S Yu

    2006-01-01

    We estimate how accurate the phase relaxation time of quantum many-body systems can be determined from data on forward peaking of evaporating protons from a compound nucleus. The angular range and accuracy of the data needed for a reliable determination of the phase relaxation time are evaluated. The general method is applied to analyze the inelastic scattering of 18 MeV protons from Pt for which previously measured double differential cross sections for two angles in the evaporating domain of the spectra show a strong forward peaking. A new experiment for an improved determination of the phase relaxation time is proposed.

  18. Method and System for Controlling a Dexterous Robot Execution Sequence Using State Classification

    Science.gov (United States)

    Sanders, Adam M. (Inventor); Platt, Robert J., Jr. (Inventor); Quillin, Nathaniel (Inventor); Permenter, Frank Noble (Inventor); Pfeiffer, Joseph (Inventor)

    2014-01-01

    A robotic system includes a dexterous robot and a controller. The robot includes a plurality of robotic joints, actuators for moving the joints, and sensors for measuring a characteristic of the joints, and for transmitting the characteristics as sensor signals. The controller receives the sensor signals, and is configured for executing instructions from memory, classifying the sensor signals into distinct classes via the state classification module, monitoring a system state of the robot using the classes, and controlling the robot in the execution of alternative work tasks based on the system state. A method for controlling the robot in the above system includes receiving the signals via the controller, classifying the signals using the state classification module, monitoring the present system state of the robot using the classes, and controlling the robot in the execution of alternative work tasks based on the present system state.

  19. Application of a cell microarray chip system for accurate, highly sensitive, and rapid diagnosis for malaria in Uganda

    Science.gov (United States)

    Yatsushiro, Shouki; Yamamoto, Takeki; Yamamura, Shohei; Abe, Kaori; Obana, Eriko; Nogami, Takahiro; Hayashi, Takuya; Sesei, Takashi; Oka, Hiroaki; Okello-Onen, Joseph; Odongo-Aginya, Emmanuel I.; Alai, Mary Auma; Olia, Alex; Anywar, Dennis; Sakurai, Miki; Palacpac, Nirianne MQ; Mita, Toshihiro; Horii, Toshihiro; Baba, Yoshinobu; Kataoka, Masatoshi

    2016-01-01

    Accurate, sensitive, rapid, and easy operative diagnosis is necessary to prevent the spread of malaria. A cell microarray chip system including a push column for the recovery of erythrocytes and a fluorescence detector was employed for malaria diagnosis in Uganda. The chip with 20,944 microchambers (105 μm width and 50 μm depth) was made of polystyrene. For the analysis, 6 μl of whole blood was employed, and leukocytes were practically removed by filtration through SiO2-nano-fibers in a column. Regular formation of an erythrocyte monolayer in each microchamber was observed following dispersion of an erythrocyte suspension in a nuclear staining dye, SYTO 21, onto the chip surface and washing. About 500,000 erythrocytes were analyzed in a total of 4675 microchambers, and malaria parasite-infected erythrocytes could be detected in 5 min by using the fluorescence detector. The percentage of infected erythrocytes in each of 41 patients was determined. Accurate and quantitative detection of the parasites could be performed. A good correlation between examinations via optical microscopy and by our chip system was demonstrated over the parasitemia range of 0.0039–2.3438% by linear regression analysis (R2 = 0.9945). Thus, we showed the potential of this chip system for the diagnosis of malaria. PMID:27445125

  20. A Modified Coal Mine Roof Rating Classification System to Design Support Requirements in Coal Mines

    Science.gov (United States)

    Taheri, Abbas; Lee, Yongha; Medina, Mario Andres Guardado

    2017-10-01

    The coal mine roof rating (CMRR) classification system has been applied in a number of coal mines worldwide including Australia. However, the current system cannot be used directly to design support measures in underground mines. Two case studies, the Eliza Hill project in Australia and Tabas coal mine in Iran were analyzed to assess the impact of various rock properties and gallery geometry on stability and to modify the CMRR classification system. Having considered the CMRR system as a working classification system, applicable information and related coal mine data were selected from the two case records. The CMRR value was evaluated and analysed by undertaking correlation between CMRR and factor of safety, followed by a parametric study based on various rock properties and gallery geometries. To improve the applicability of the current system, the CMRR system was then modified by adding additional parameters, namely, the width of roof span and the density of overburden rock. Consequently, based on the modified CMRR system (mCMRR) roof support requirements were recommended to select the suitable rock bolting system including length and spacing of rock bolt. Numerical modelling were then undertaken to verify the support requirements recommended. The support requirements recommended by the mCMRR were found to be relatively identical with numerical analysis results. Support systems proposed by mCMRR can assist mining engineers to assess the stability of underground coal mines or verify the results of other design tools.